An Educational Device for a Hands-on Activity to Visualize the Effect of Atherosclerosis on Blood Flow

ERIC Educational Resources Information Center

de Almeida, J. P. P. G. L.; de Lima, J. L. M. P.

2013-01-01

An educational device was created to develop a hands-on activity to illustrate how atherosclerosis can dramatically reduce blood flow in human vessels. The device was conceived, designed, and built at the University of Coimbra, in response to a request from the Exploratorio Infante D. Henrique Science Centre Museum, where it is presently…

PLAY HANDS PROTECTIVE GLOVES: TECHNICAL NOTE ON DESIGN AND CONCEPT.

PubMed

Houston-Hicks, Michele; Lura, Derek J; Highsmith, M Jason

2016-09-01

Cerebral Palsy (CP) is the leading cause of childhood motor disability, with a global incidence of 1.6 to 2.5/1,000 live births. Approximately 23% of children with CP are dependent upon assistive technologies. Some children with developmental disabilities have self-injurious behaviors such as finger biting but also have therapeutic needs. The purpose of this technical note is to describe design considerations for a protective glove and finger covering that maintains finger dexterity for children who exhibit finger and hand chewing (dermatophagia) and require therapeutic range of motion and may benefit from sensory stimulation resulting from constant contact between glove and skin. Protecting Little and Adolescent Youth (PLAY) Hands are protective gloves for children with developmental disorders such as CP who injure themselves by biting their hands due to pain or sensory issues. PLAY Hands will be cosmetically appealing gloves that provide therapeutic warmth, tactile sensory feedback, range of motion for donning/ doffing, and protection to maximize function and quality of life for families of children with developmental disorders. The technology is either a per-finger protective orthosis or an entire glove solution designed from durable 3D-printed biodegradable/bioabsorbable materials such as thermoplastics. PLAY Hands represent a series of protective hand wear interventions in the areas of self-mutilating behavior, kinematics, and sensation. They will be made available in a range of protective iterations from single- or multi-digit finger orthoses to a basic glove design to a more structurally robust and protective iteration. To improve the quality of life for patients and caregivers, they are conceptualized to be cosmetically appealing, protective, and therapeutic.

Hands-On Environmental Education Activities for K-6 Teachers.

ERIC Educational Resources Information Center

Kaufman, Donald G.; Eshbaugh, Stephen H.

This environmental education workbook is aimed at helping kindergarten through 6th-grade teachers and contains hands-on activities directly targeted toward a particular age group, with equal distribution to each grade. Subject area descriptions and several multicultural activities are also included. Each activity lists the title, subject taught,…

Multidisciplinary Graduate Training in Social Research Methodology and Computer-Assisted Qualitative Data Analysis: A Hands-On/Hands-Off Course Design

ERIC Educational Resources Information Center

Bourque, Claude Julie; Bourdon, Sylvain

2017-01-01

Drawing on the experience of training graduate students and researchers in qualitative and mixed-methods analysis since the mid-1990s, the authors reflect on the evolution of a multidisciplinary graduate course developed in a Canadian university since 2007. The hands-on/hands-off course design based on the use of NVivo was developed in parallel…

Mechanical design and performance specifications of anthropomorphic prosthetic hands: a review.

PubMed

Belter, Joseph T; Segil, Jacob L; Dollar, Aaron M; Weir, Richard F

2013-01-01

In this article, we set forth a detailed analysis of the mechanical characteristics of anthropomorphic prosthetic hands. We report on an empirical study concerning the performance of several commercially available myoelectric prosthetic hands, including the Vincent, iLimb, iLimb Pulse, Bebionic, Bebionic v2, and Michelangelo hands. We investigated the finger design and kinematics, mechanical joint coupling, and actuation methods of these commercial prosthetic hands. The empirical findings are supplemented with a compilation of published data on both commercial and prototype research prosthetic hands. We discuss numerous mechanical design parameters by referencing examples in the literature. Crucial design trade-offs are highlighted, including number of actuators and hand complexity, hand weight, and grasp force. Finally, we offer a set of rules of thumb regarding the mechanical design of anthropomorphic prosthetic hands.

Structure design for a Two-DoF myoelectric prosthetic hand to realize basic hand functions in ADLs.

PubMed

Hoshigawa, Suguru; Jiang, Yinlai; Kato, Ryu; Morishita, Soichiro; Nakamura, Tatsuhiro; Yabuki, Yoshiko; Yokoi, Hiroshi

2015-01-01

Prosthetic hands are desired by those who have lost a hand or both hands not only for decoration but also for the functions to help them with their activities of daily living (ADL). Prosthetic robotic hands that are developed to fully realize the function of a human hand are usually too expensive to be economically available, difficult to operate and maintain, or over heavy for longtime wearing. The aim of this study is therefore to develop a simplified prosthetic hand (sim-PH), which is to be controlled by myoelectric signals from the user, to realize the most important grasp motions in ADL by trading off the cost and performance. This paper reports the structure design of a two-DoF sim-PH with two motors to drive the CM joint of the thumb and the interlocked MP joints of the other four fingers. In order to optimize the structure, the model of the sim-PH was proposed based on which 7 sim-PHs with different structural parameters were manufactured and tested in a pick-and-place experiment. Correspondence analysis of the experimental results clarified the relationship between the hand functions and the shapes of fingers.

The analysis of student’s critical thinking ability on discovery learning by using hand on activity based on the curiosity

NASA Astrophysics Data System (ADS)

Sulistiani, E.; Waluya, S. B.; Masrukan

2018-03-01

This study aims to determine (1) the effectiveness of Discovery Learning model by using Hand on Activity toward critical thinking abilities, and (2) to describe students’ critical thinking abilities in Discovery Learning by Hand on Activity based on curiosity. This study is mixed method research with concurrent embedded design. Sample of this study are students of VII A and VII B of SMP Daarul Qur’an Ungaran. While the subject in this study is based on the curiosity of the students groups are classified Epistemic Curiosity (EC) and Perceptual Curiosity (PC). The results showed that the learning of Discovery Learning by using Hand on Activity is effective toward mathematics critical thinking abilities. Students of the EC type are able to complete six indicators of mathematics critical thinking abilities, although there are still two indicators that the result is less than the maximum. While students of PC type have not fully been able to complete the indicator of mathematics critical thinking abilities. They are only strong on indicators formulating questions, while on the other five indicators they are still weak. The critical thinking abilities of EC’s students is better than the critical thinking abilities of the PC’s students.

iHandRehab: an interactive hand exoskeleton for active and passive rehabilitation.

PubMed

Li, Jiting; Zheng, Ruoyin; Zhang, Yuru; Yao, Jianchu

2011-01-01

This paper presents an interactive exoskeleton device for hand rehabilitation, iHandRehab, which aims to satisfy the essential requirements for both active and passive rehabilitation motions. iHandRehab is comprised of exoskeletons for the thumb and index finger. These exoskeletons are driven by distant actuation modules through a cable/sheath transmission mechanism. The exoskeleton for each finger has 4 degrees of freedom (DOF), providing independent control for all finger joints. The joint motion is accomplished by a parallelogram mechanism so that the joints of the device and their corresponding finger joints have the same angular displacement when they rotate. Thanks to this design, the joint angles can be measured by sensors real time and high level motion control is therefore made very simple without the need of complicated kinematics. The paper also discusses important issues when the device is used by different patients, including its adjustable joint range of motion (ROM) and adjustable range of phalanx length (ROPL). Experimentally collected data show that the achieved ROM is close to that of a healthy hand and the ROPL covers the size of a typical hand, satisfying the size need of regular hand rehabilitation. In order to evaluate the performance when it works as a haptic device in active mode, the equivalent moment of inertia (MOI) of the device is calculated. The results prove that the device has low inertia which is critical in order to obtain good backdrivability. Experimental analysis shows that the influence of friction accounts for a large portion of the driving torque and warrants future investigation. © 2011 IEEE

Design of the NASA Robonaut Hand

NASA Technical Reports Server (NTRS)

Lovchik, Chris S.; Aldridge, H. A.; Driftler, Myron A.

1999-01-01

The design of a highly anthropomorphic human scale robot hand for space based operations is described. This five finger hand combined with its integrated wrist and forearm has fourteen independent degrees of freedom. The device approximates very well the kinematics and required strength of an astronaut's hand when operating through a pressurized space suit glove. The mechanisms used to meet these requirements are explained in detail along with the design philosophy behind them. Integration experiences reveal the challenges associated with obtaining the required capabilities within the desired size. The initial finger control strategy is presented along with examples of obtainable grasps.

Design of rehabilitation robot hand for fingers CPM training

NASA Astrophysics Data System (ADS)

Zhou, Hongfu; Chan, T. W.; Tong, K. Y.; Kwong, K. K.; Yao, Xifan

2008-10-01

This paper presents a low-cost prototype for rehabilitation robot aide patient do hands CPM (continuous passive motion) training. The design of the prototype is based on the principle of Rutgers Master II glove, but it is better in performance for more improvement made. In the design, it uses linear motors to replace pneumatic actuators to make the product more portable and mobile. It increases finger training range to 180 degree for the full range training of hand finger holding and extension. Also the prototype can not only be wearing on palm and fore arm do training for face to face with finger move together, but also be put in the opposite hand glove wear direction for hand rehabilitation training. During the research, Solidworks is used as the tool for mechanical design and movement simulation. It proved through experiment that the prototype made in the research is appropriate for hand do CPM training.

A Hands-On Activity Incorporating the Threefold Representation on Limiting Reactant

ERIC Educational Resources Information Center

Gonza´lez-Sa´nchez, Ange´lica M.; Ortiz-Nieves, Edgardo L.; Medina, Zuleikra

2014-01-01

Many students share the common belief that the limiting reactant in a chemical reaction is the reactant in the smallest quantity of material. To help students overcome this difficulty a hands-on activity for the limiting reactant concept was developed. The activity incorporates the three levels of representation (macroscopic, submicroscopic, and…

Student Responses to a Hands-On Kinesthetic Lecture Activity for Learning about the Oxygen Carrying Capacity of Blood

ERIC Educational Resources Information Center

Breckler, Jennifer; Yu, Justin R.

2011-01-01

This article describes a new hands-on, or "kinesthetic," activity for use in a physiology lecture hall to help students comprehend an important concept in cardiopulmonary physiology known as oxygen carrying capacity. One impetus for designing this activity was to address the needs of students who have a preference for kinesthetic…

A Case Study for Comparing the Effectiveness of a Computer Simulation and a Hands-on Activity on Learning Electric Circuits

ERIC Educational Resources Information Center

Ekmekci, Adem; Gulacar, Ozcan

2015-01-01

Science education reform emphasizes innovative and constructivist views of science teaching and learning that promotes active learning environments, dynamic instructions, and authentic science experiments. Technology-based and hands-on instructional designs are among innovative science teaching and learning methods. Research shows that these two…

Design and ergonomics. Methods for integrating ergonomics at hand tool design stage.

PubMed

Marsot, Jacques; Claudon, Laurent

2004-01-01

As a marked increase in the number of musculoskeletal disorders was noted in many industrialized countries and more specifically in companies that require the use of hand tools, the French National Research and Safety Institute (INRS) launched in 1999 a research project on the topic of integrating ergonomics into hand tool design, and more particularly to a design of a boning knife. After a brief recall of the difficulties of integrating ergonomics at the design stage, the present paper shows how 3 design methodological tools--Functional Analysis, Quality Function Deployment and TRIZ--have been applied to the design of a boning knife. Implementation of these tools enabled us to demonstrate the extent to which they are capable of responding to the difficulties of integrating ergonomics into product design.

Calculator-Controlled Robots: Hands-On Mathematics and Science Discovery

ERIC Educational Resources Information Center

Tuchscherer, Tyson

2010-01-01

The Calculator Controlled Robots activities are designed to engage students in hands-on inquiry-based missions. These activities address National science and technology standards, as well as specifically focusing on mathematics content and process standards. There are ten missions and three exploration extensions that provide activities for up to…

Actigraphic investigations on the activity-rest behavior of right- and left-handed students.

PubMed

Lehnkering, Hanna; Strauss, Andreas; Wegner, Brigitte; Siegmund, Renate

2006-01-01

The aim of this study was to explore differences between left-and right-handed subjects in sleep duration. Sleep and activity patterns were continuously registered for 12 days using actometers on 20 left-handed and 20 right-handed medical students in Berlin. Handedness was determined by a modified version of the Edinburgh handedness inventory. Each participant wore one actometer on each wrist. Actiwatch Sleep Analysis Software (CNT, UK) was used to evaluate the data, and statistical calculations were performed with a non-parametric variance analysis. A significant difference in mean sleep duration between left-handers (7.9 h) and right-handers (7.3 h) was determined (p=0.025 for measurement made on the dominant hand and p=0.013 for ones made on the non-dominant hand). In contrast, the maximal phase of daily activity (acrophase) did not show any difference between the two groups. The difference in sleep duration might be caused by either the greater effort required for left-handers to cope in a right-handed world or by structural brain differences.

The Geriatric Hand: Correlation of Hand-Muscle Function and Activity Restriction in Elderly

ERIC Educational Resources Information Center

Incel, Nurgul Arinci; Sezgin, Melek; As, Ismet; Cimen, Ozlem Bolgen; Sahin, Gunsah

2009-01-01

On the basis of the importance of hand manipulation in activities of daily living (ADL), deterioration of hand function because of various factors reduces quality and independence of life of the geriatric population. The aim of this study was to identify age-induced changes in manual function and to quantify the correlations between hand-muscle…

Grasp specific and user friendly interface design for myoelectric hand prostheses.

PubMed

Mohammadi, Alireza; Lavranos, Jim; Howe, Rob; Choong, Peter; Oetomo, Denny

2017-07-01

This paper presents the design and characterisation of a hand prosthesis and its user interface, focusing on performing the most commonly used grasps in activities of daily living (ADLs). Since the operation of a multi-articulated powered hand prosthesis is difficult to learn and master, there is a significant rate of abandonment by amputees in preference for simpler devices. In choosing so, amputees chose to live with fewer features in their prosthesis that would more reliably perform the basic operations. In this paper, we look simultaneously at a hand prosthesis design method that aims for a small number of grasps, a low complexity user interface and an alternative method to the current use of EMG as a preshape selection method through the use of a simple button; to enable amputees to get to and execute the intended hand movements intuitively, quickly and reliably. An experiment is reported at the end of the paper comparing the speed and accuracy with which able-bodied naive subjects are able to select the intended preshapes through the use of a simplified EMG method and a simple button. It is shown that the button was significantly superior in the speed of successful task completion and marginally superior in accuracy (success of first attempt).

A framework for designing hand hygiene educational interventions in schools.

PubMed

Appiah-Brempong, Emmanuel; Harris, Muriel J; Newton, Samuel; Gulis, Gabriel

2018-03-01

Hygiene education appears to be the commonest school-based intervention for preventing infectious diseases, especially in the developing world. Nevertheless, there remains a gap in literature regarding a school-specific theory-based framework for designing a hand hygiene educational intervention in schools. We sought to suggest a framework underpinned by psychosocial theories towards bridging this knowledge gap. Furthermore, we sought to propound a more comprehensive definition of hand hygiene which could guide the conceptualisation of hand hygiene interventions in varied settings. Literature search was guided by a standardized tool and literature was retrieved on the basis of a predetermined inclusion criteria. Databases consulted include PubMed, ERIC, and EBSCO host (Medline, CINAHL, PsycINFO, etc.). Evidence bordering on a theoretical framework to aid the design of school-based hand hygiene educational interventions is summarized narratively. School-based hand hygiene educational interventions seeking to positively influence behavioural outcomes could consider enhancing psychosocial variables including behavioural capacity, attitudes and subjective norms (normative beliefs and motivation to comply). A framework underpinned by formalized psychosocial theories has relevance and could enhance the design of hand hygiene educational interventions, especially in schools.

Design and control of five fingered under-actuated robotic hand

NASA Astrophysics Data System (ADS)

Sahoo, Biswojit; Parida, Pramod Kumar

2018-04-01

Now a day's research regarding humanoid robots and its application in different fields (industry, household, rehabilitation and exploratory) is going on entire the globe. Among which a challenging topic is to design a dexterous robotic hand which not only can perform as a hand of a robot but also can be used in re habilitation. The basic key concern is a dexterous robot hand which can be able to mimic the function of biological hand to perform different operations. This thesis work is regarding design and control of a under-actuated robotic hand consisting of four under actuated fingers (index finger, middle finger, little finger and ring finger ) , a thumb and a dexterous palm which can copy the motions and grasp type of human hand which having 21degrees of freedom instead of 25Degree Of Freedom.

Hand Rehabilitation Robotics on Poststroke Motor Recovery

PubMed Central

2017-01-01

The recovery of hand function is one of the most challenging topics in stroke rehabilitation. Although the robot-assisted therapy has got some good results in the latest decades, the development of hand rehabilitation robotics is left behind. Existing reviews of hand rehabilitation robotics focus either on the mechanical design on designers' view or on the training paradigms on the clinicians' view, while these two parts are interconnected and both important for designers and clinicians. In this review, we explore the current literature surrounding hand rehabilitation robots, to help designers make better choices among varied components and thus promoting the application of hand rehabilitation robots. An overview of hand rehabilitation robotics is provided in this paper firstly, to give a general view of the relationship between subjects, rehabilitation theories, hand rehabilitation robots, and its evaluation. Secondly, the state of the art hand rehabilitation robotics is introduced in detail according to the classification of the hardware system and the training paradigm. As a result, the discussion gives available arguments behind the classification and comprehensive overview of hand rehabilitation robotics. PMID:29230081

The Effects of Extravehicular Activity (EVA) Glove Pressure on Hand Strength

NASA Technical Reports Server (NTRS)

Rajulu, Sudhakar; Mesloh, Miranda; Thompson, Shelby; England, Scott; Benson, Liz

2009-01-01

With the new vision of space travel aimed at traveling back to the Moon and eventually to Mars, NASA is designing a new spacesuit glove. The purpose of this study was to baseline hand strength while wearing the current Extravehicular Activity (EVA) glove, the Phase VI. By varying the pressure in the glove, hand strength could be characterized as a function of spacesuit pressure. This finding is of extreme importance when evaluating missions that require varying suit pressures associated with different operations within NASA's current human spaceflight program, Constellation. This characterization fed directly into the derivation of requirements for the next EVA glove. This study captured three types of maximum hand strength: grip, lateral pinch, and pulp-2 pinch. All three strengths were measured under varying pressures and compared to a bare-hand condition. The resulting standardized data was reported as a percentage of the bare-hand strength. The first wave of tests was performed while the subjects, four female and four male, were wearing an Extravehicular Mobility Unit (EMU) suit supported by a suit stand. This portion of the test collected data from the barehand, suited unpressurized, and suited pressurized (4.3 psi) conditions. In addition, the effects of the Thermal Micrometeoroid Garment (TMG) on hand strength were examined, with the suited unpressurized and pressurized cases tested with and without a TMG. It was found that, when pressurized and with the TMG, the Phase VI glove reduced applied grip strength to a little more than half of the subject s bare-hand strength. The lateral pinch strength remained relatively constant while the pulp-2 pinch strength actually increased with pressure. The TMG was found to decrease maximum applied grip strength by an additional 10% for both pressurized and unpressurized cases, while the pinch strengths saw little to no change. In developing requirements based on human subjects, it is important to attempt to derive

Promoting Physical Activity through Hand-Held Computer Technology

PubMed Central

King, Abby C.; Ahn, David K.; Oliveira, Brian M.; Atienza, Audie A.; Castro, Cynthia M.; Gardner, Christopher D.

2009-01-01

Background Efforts to achieve population-wide increases in walking and similar moderate-intensity physical activities potentially can be enhanced through relevant applications of state-of-the-art interactive communication technologies. Yet few systematic efforts to evaluate the efficacy of hand-held computers and similar devices for enhancing physical activity levels have occurred. The purpose of this first-generation study was to evaluate the efficacy of a hand-held computer (i.e., personal digital assistant [PDA]) for increasing moderate intensity or more vigorous (MOD+) physical activity levels over 8 weeks in mid-life and older adults relative to a standard information control arm. Design Randomized, controlled 8-week experiment. Data were collected in 2005 and analyzed in 2006-2007. Setting/Participants Community-based study of 37 healthy, initially underactive adults aged 50 years and older who were randomized and completed the 8-week study (intervention=19, control=18). Intervention Participants received an instructional session and a PDA programmed to monitor their physical activity levels twice per day and provide daily and weekly individualized feedback, goal setting, and support. Controls received standard, age-appropriate written physical activity educational materials. Main Outcome Measure Physical activity was assessed via the Community Healthy Activities Model Program for Seniors (CHAMPS) questionnaire at baseline and 8 weeks. Results Relative to controls, intervention participants reported significantly greater 8-week mean estimated caloric expenditure levels and minutes per week in MOD+ activity (p<0.04). Satisfaction with the PDA was reasonably high in this largely PDA-naive sample. Conclusions Results from this first-generation study indicate that hand-held computers may be effective tools for increasing initial physical activity levels among underactive adults. PMID:18201644

The Robonaut 2 Hand - Designed to do Work with Tools

NASA Technical Reports Server (NTRS)

Bridgwater, L. B.; Ihrke, C. A.; Diftler, M. A.; Abdallah, M. E.; Radford, N. A.; Rogers, J. M.; Yayathi, S.; Askew, R. S.; Linn, D. M.

2011-01-01

The second generation Robonaut hand has many advantages over its predecessor. This mechatronic device is more dexterous and has improved force control and sensing giving it the capability to grasp and actuate a wider range of tools. It can achieve higher peak forces at higher speeds than the original. Developed as part of a partnership between General Motors and NASA, the hand is designed to more closely approximate a human hand. Having a more anthropomorphic design allows the hand to attain a larger set of useful grasps for working with human interfaces. Key to the hand s improved performance is the use of lower friction drive elements and a redistribution of components from the hand to the forearm, permitting more sensing in the fingers and palm where it is most important. The following describes the design, mechanical/electrical integration, and control features of the hand. Lessons learned during the development and initial operations along with planned refinements to make it more effective are presented.

Developing Physics Concepts through Hands-On Problem Solving: A Perspective on a Technological Project Design

ERIC Educational Resources Information Center

Hong, Jon-Chao; Chen, Mei-Yung; Wong, Ashley; Hsu, Tsui-Fang; Peng, Chih-Chi

2012-01-01

In a contest featuring hands-on projects, college students were required to design a simple crawling worm using planning, self-monitoring and self-evaluation processes to solve contradictive problems. To enhance the efficiency of problem solving, one needs to practice meta-cognition based on an application of related scientific concepts. The…

Hands-on astronomy activities for the elementary school

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lutz, T.E.; Horne, J.C.

We held a series of astronomy workshops for local school teachers using astronomy activities from a course we give for Elementary Education majors. The school teachers provide us with feedback about successes and failures. Then we try the revised activities in the classroom. Via this in-service and pre-service feedback, the astronomy laboratory activities in the course have been completely revised over the last three years. The activities we use are almost entirely hands-on. The activities include use of log book (or journal) for describing outside-of-class observations of sunsets, phases of the moon, portable sundial, and the somewhat unique method wemore » use to teach the constellations. In addition, all laboratory activity records are kept in the log book. Laboratory activities cover the use of fists to measure degrees, constellations, phases of the moon, relative distances and size of planets, Invent an Alien, lenses, images and telescopes, and the making of a comet. In our poster, based roughly on the theme of the seasons, we will describe a portable, multi-user sundial, length of the day display using newspaper data, two temperature/season activities, and a model demonstration of why the sundial shadows behave as they do.« less

How can the curation of hands-on STEM activities power successful mobile apps and websites?

NASA Astrophysics Data System (ADS)

Porcello, D.; Peticolas, L. M.; Schwerin, T. G.

2015-12-01

The Lawrence Hall of Science (LHS) is University of California, Berkeley's public science center. Over the last decade, the Center for Technology Innovation at LHS has partnered with many institutions to establish a strong track record of developing successful technology solutions to support STEM teaching and learning within informal environments. Curation by subject-matter experts has been at the heart of many educational technology products from LHS and its partners that are directed at educators and families. This work includes: (1) popular digital libraries for inquiry-based activities at Howtosmile.org (NSF DRL #0735007) and NASA Earth and Space science education resources at NASAwavelength.org; and novel mobile apps like DIY Sun Science (NASA NNX10AE05G) and DIY Human Body (NIH 5R25OD010543) designed to scaffold exploration of STEM phenomena at home. Both NASA Wavelength and DIY Sun Science arose out of long-term collaborations with the Space Sciences Laboratory at UC Berkeley, Institute for Global Environmental Strategies (IGES), and other NASA-funded organizations, in partnership with NASA through cooperative agreements. This session will review the development, formative evaluation, and usage metrics for these two Earth and Space science-themed educational technology products directly relevant to the AGU community. Questions reviewed by presenters will include: What makes a good hands-on activity, and what essential information do educators depend on when searching for programming additions? What content and connections do families need to explore hands-on activities? How can technology help incorporate educational standards into the discovery process for learning experiences online? How do all these components drive the design and user experience of websites and apps that showcase STEM content?

The Art and Science Connection. Hands-On Activities for Primary Students.

ERIC Educational Resources Information Center

Tolley, Kimberley

Most people think that the artist and the scientist live in two totally different worlds. However, art and science are only two different ways of understanding and knowing the world. To help primary students make a connection between art and science, a collection of hands-on activities have been developed. By engaging in these activities that…

The Art and Science Connection: Hands-on Activities for Intermediate Students.

ERIC Educational Resources Information Center

Tolley, Kimberley

Most people think that the artist and the scientist live in two totally different worlds. However, art and science are only two different ways of understanding and knowing the world. To help intermediate students make a connection between art and science, a collection of hands-on activities have been developed. By engaging in these activities that…

Hand preference for sending mobile-phone text messages: associations with sex, writing hand, and throwing hand.

PubMed

Lambert, Anthony; Hallett, Charlene

2009-07-01

Hand preference for sending mobile-phone text messages ("texting") and its relationship with hand preference for other activities were investigated in a questionnaire study with 886 participants. Overall rates of both sinistrality and dextrality were reduced for texting, in comparison with other activities, due to the substantial number of individuals who use both hands simultaneously when performing this activity. Because they both involve verbal expression, it was hypothesised that the association between hand preferences for texting and writing might be stronger than the association between either of these tasks and more spatial activities, such as throwing. This prediction was not confirmed, either in the sample as a whole or in a sub-group of individuals who reported writing and throwing with opposite hands. Females were less likely than males to use their left hand when sending text messages. Implications of these findings are discussed, in relation to theoretical views of handedness and in relation to practical aspects of mobile-phone design.

An ergonomic approach to design hand tool for agricultural production.

PubMed

Khidiya, Mahendra Singh; Bhardwaj, Awadhesh

2012-01-01

Hand tool mechanisms designed to reduce the risk factors have rarely been studied. In this paper it is analyze trowel firstly designing in CATIA and then its Finite Element Analysis has been carried out by ABAQUS. The main emphasis is on finding stresses by using this software, then removing them by suitable mechanical working on tool & ergonomic change in the design of handle to make it more comfortable. Body part discomfort score and overall discomfort rating experienced by the subjects had also been estimated. During the muscular activity workers physiological responses i.e. energy expenditure rate, oxygen consumption rate and heart rate increases. This increase in physiological responses is related to the type, intensity and duration of work and thus sets limits to the performance of heavy work. In this paper oxygen consumption rate and heart rate was used for physiological cost estimation. These parameters were measured by Computerized Ambulatory Metabolic Measurement System K4b2.

The Effects of Extravehicular Activity (EVA) Glove Pressure on Hand Strength

NASA Technical Reports Server (NTRS)

Mesloh, Miranda; England, Scott; Benson, Elizabeth; Thompson, Shelby; Rajulu, Sudhakar

2010-01-01

The purpose of this study was to characterize hand strength, while wearing a Phase VI Extravehicular Activity (EVA) glove in an Extravehicular Mobility Unit (EMU) suit. Three types of data were collected: hand grip, lateral pinch, and pulp-2 pinch, wider three different conditions: bare-handed, gloved with no Thermal Micrometeoroid Garment (TMG), and glove with TMG. In addition, during the gloved conditions, subjects were tested when unpressurized and pressurized (43 psi). As a percentage of bare-hand strength, the TMG condition showed reduction in grip strength to 55% unpressurized and 46% pressurized. Without the TMG, grip strength increased to 66% unpressurized and 58% pressurized of bare-hand strength. For lateral pinch strength, the reduction in strength was the same for both pressure conditions and with and without the TMG, about 8.5% of bare-hand Pulp-2 pinch strength with no TMG showed an increase to 122% unpressurized and 115% pressurized of bare-hand strength. While wearing the TMG, pulp-2 pinch strength was 115% of bare-hand strength for both pressure conditions.

Student responses to a hands-on kinesthetic lecture activity for learning about the oxygen carrying capacity of blood.

PubMed

Breckler, Jennifer; Yu, Justin R

2011-03-01

This article describes a new hands-on, or "kinesthetic," activity for use in a physiology lecture hall to help students comprehend an important concept in cardiopulmonary physiology known as oxygen carrying capacity. One impetus for designing this activity was to address the needs of students who have a preference for kinesthetic learning and to help increase their understanding and engagement during lecture. This activity uses simple inexpensive materials, provides an effective model for demonstrating related pathophysiology, and helps promote active learning. The activity protocol and its implementation are described here in detail. We also report data obtained from student surveys and assessment tools to determine the effectiveness of the activity on student conceptual learning and perceptions. A brief multiple-choice pretest showed that although students had already been introduced to the relevant concepts in lecture, they had not yet mastered these concepts before performing the activity. Two postactivity assessments showed that student performance was significantly improved on the posttest compared with the pretest and that information was largely retained at the end of the course. Survey data showed that one-half of the students stated kinesthetic learning as among their learning preferences, yet nearly all students enjoyed and were engaged in this hands-on kinesthetic activity regardless of their preferences. Most students would recommend it to their peers and expressed a desire for more kinesthetic learning opportunities in the lecture curriculum.

Case-Cohort Studies: Design and Applicability to Hand Surgery.

PubMed

Vojvodic, Miliana; Shafarenko, Mark; McCabe, Steven J

2018-04-24

Observational studies are common research strategies in hand surgery. The case-cohort design offers an efficient and resource-friendly method for risk assessment and outcomes analysis. Case-cohorts remain underrepresented in upper extremity research despite several practical and economic advantages over case-control studies. This report outlines the purpose, utility, and structure of the case-cohort design and offers a sample research question to demonstrate its value to risk estimation for adverse surgical outcomes. The application of well-designed case-cohort studies is advocated in an effort to improve the quality and quantity of observational research evidence in hand and upper extremity surgery. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Designing a Hands-On Brain Computer Interface Laboratory Course

PubMed Central

Khalighinejad, Bahar; Long, Laura Kathleen; Mesgarani, Nima

2017-01-01

Devices and systems that interact with the brain have become a growing field of research and development in recent years. Engineering students are well positioned to contribute to both hardware development and signal analysis techniques in this field. However, this area has been left out of most engineering curricula. We developed an electroencephalography (EEG) based brain computer interface (BCI) laboratory course to educate students through hands-on experiments. The course is offered jointly by the Biomedical Engineering, Electrical Engineering, and Computer Science Departments of Columbia University in the City of New York and is open to senior undergraduate and graduate students. The course provides an effective introduction to the experimental design, neuroscience concepts, data analysis techniques, and technical skills required in the field of BCI. PMID:28268946

Designing a hands-on brain computer interface laboratory course.

PubMed

Khalighinejad, Bahar; Long, Laura Kathleen; Mesgarani, Nima

2016-08-01

Devices and systems that interact with the brain have become a growing field of research and development in recent years. Engineering students are well positioned to contribute to both hardware development and signal analysis techniques in this field. However, this area has been left out of most engineering curricula. We developed an electroencephalography (EEG) based brain computer interface (BCI) laboratory course to educate students through hands-on experiments. The course is offered jointly by the Biomedical Engineering, Electrical Engineering, and Computer Science Departments of Columbia University in the City of New York and is open to senior undergraduate and graduate students. The course provides an effective introduction to the experimental design, neuroscience concepts, data analysis techniques, and technical skills required in the field of BCI.

Hands-on Herps.

ERIC Educational Resources Information Center

Science Activities, 1987

1987-01-01

Presents a hands-on activity to help primary, intermediate, and advanced students learn about and compare the general characteristics of reptiles and amphibians. Suggests "herp stations" to provide experiences. Details materials, background and procedures necessary for using this activity. (CW)

Mechanical design of a shape memory alloy actuated prosthetic hand.

PubMed

De Laurentis, Kathryn J; Mavroidis, Constantinos

2002-01-01

This paper presents the mechanical design for a new five fingered, twenty degree-of-freedom dexterous hand patterned after human anatomy and actuated by Shape Memory Alloy artificial muscles. Two experimental prototypes of a finger, one fabricated by traditional means and another fabricated by rapid prototyping techniques, are described and used to evaluate the design. An important aspect of the Rapid Prototype technique used here is that this multi-articulated hand will be fabricated in one step, without requiring assembly, while maintaining its desired mobility. The use of Shape Memory Alloy actuators combined with the rapid fabrication of the non-assembly type hand, reduce considerably its weight and fabrication time. Therefore, the focus of this paper is the mechanical design of a dexterous hand that combines Rapid Prototype techniques and smart actuators. The type of robotic hand described in this paper can be utilized for applications requiring low weight, compactness, and dexterity such as prosthetic devices, space and planetary exploration.

Motivational Qualities of Hands-on Science Activities for Turkish Preservice Kindergarten Teachers

ERIC Educational Resources Information Center

Bulunuz, Mizrap

2012-01-01

The purpose of this research, conducted in a science methods course in Turkey, was to explore the qualities of hands-on science activities which might motivate preservice kindergarten teachers to use these activities in their own classrooms. Two similar classes totaling 47 students and taught by the same instructor were used in this study. On…

Design and Evaluation of a Soft and Wearable Robotic Glove for Hand Rehabilitation.

PubMed

Biggar, Stuart; Yao, Wei

2016-10-01

In the modern world, due to an increased aging population, hand disability is becoming increasingly common. The prevalence of conditions such as stroke is placing an ever-growing burden on the limited fiscal resources of health care providers and the capacity of their physical therapy staff. As a solution, this paper presents a novel design for a wearable and adaptive glove for patients so that they can practice rehabilitative activities at home, reducing the workload for therapists and increasing the patient's independence. As an initial evaluation of the design's feasibility the prototype was subjected to motion analysis to compare its performance with the hand in an assessment of grasping patterns of a selection of blocks and spheres. The outcomes of this paper suggest that the theory of design has validity and may lead to a system that could be successful in the treatment of stroke patients to guide them through finger flexion and extension, which could enable them to gain more control and confidence in interacting with the world around them.

Design and Implementation of a Project-Based Active/Cooperative Engineering Design Course for Freshmen

ERIC Educational Resources Information Center

Abdulaal, R. M.; Al-Bahi, A. M.; Soliman, A. Y.; Iskanderani, F. I.

2011-01-01

A project-based active/cooperative design course is planned, implemented, assessed and evaluated to achieve several desired engineering outcomes. The course allows freshman-level students to gain professional hands-on engineering design experience through an opportunity to practise teamwork, quality principles, communication skills, life-long…

The Effects of Industrial Protective Gloves and Hand Skin Temperatures on Hand Grip Strength and Discomfort Rating

PubMed Central

2017-01-01

Daily working activities and functions require a high contribution of hand and forearm muscles in executing grip force. To study the effects of wearing different gloves on grip strength, under a variety of hand skin temperatures, an assessment of the maximum grip strength was performed with 32 healthy male workers with a mean age (standard deviation) of 30.44 (5.35) years wearing five industrial gloves at three hand skin temperatures. Their ages and anthropometric characteristics including body mass index (BMI), hand length, hand width, hand depth, hand palm, and wrist circumference were measured. The hand was exposed to different bath temperatures (5 °C, 25 °C, and 45 °C) and hand grip strength was measured using a Jamar hydraulic hand dynamometer with and without wearing the gloves (chemical protection glove, rubber insulating glove, anti-vibration impact glove, cotton yarn knitted glove, and RY-WG002 working glove). The data were analyzed using the Shapiro–Wilk test, Pearson correlation coefficient, Tukey test, and analysis of variance (ANOVA) of the within-subject design analysis. The results showed that wearing gloves significantly affected the maximum grip strength. Wearing the RY-WG002 working glove produced a greater reduction on the maximum grip when compared with the bare hand, while low temperatures (5 °C) had a significant influence on grip when compared to medium (25 °C) and high (45 °C) hand skin temperatures. In addition, participants felt more discomfort in both environmental extreme conditions. Furthermore, they reported more discomfort while wearing neoprene, rubber, and RY-WG002 working gloves. PMID:29207573

Of Heart & Kidneys: Hands-On Activities for Demonstrating Organ Function & Repair

ERIC Educational Resources Information Center

Kao, Robert M.

2014-01-01

A major challenge in teaching organ development and disease is deconstructing a complex choreography of molecular and cellular changes over time into a linear stepwise process for students. As an entry toward learning developmental concepts, I propose two inexpensive hands-on activities to help facilitate learning of (1) how to identify defects in…

Relationship between touch sensation of the affected hand and performance of valued activities in individuals with chronic stroke.

PubMed

Hill, Valerie A; Fisher, Thomas; Schmid, Arlene A; Crabtree, Jeffrey; Page, Stephen J

2014-01-01

To investigate the association between touch sensation of the affected hand and performance and satisfaction with performance of valued activities in individuals with chronic stroke. Using a cross-sectional study design, this study correlated factors related to hand sensation and activity performance in individuals with chronic stroke. The Touch Test Evaluators and Canadian Occupational Performance Measure (COPM) were used. Correlations were used to determine the relationships between touch sensation of the affected hand and individuals' performance and satisfaction with performance of valued activities. There was a good to excellent relationship between sensation and performance and satisfaction with performance of valued activities for individuals with intact touch sensation of the affected hand who scored higher on the COPM. There was little to no relationship between touch sensation of the affected hand and performance of valued activities for individuals with impaired sensation. This is the first study to relate touch sensation of the affected hand and performance and satisfaction with performance of valued activities in individuals with stroke. The findings suggest that rehabilitation therapists need to continue to address sensory function in evaluation and intervention as it relates to performance in valued activities. This study serves as a foundation for future research in sensation and performance of valued activities in individuals with chronic stroke.

Determination of hand soil loading, soil transfer, and particle size variations after hand-pressing and hand-mouthing activities

EPA Science Inventory

Hand-pressing trials and hand-to-mouth soil transfer experiments were conducted to better understand soil loadings, soil transfer ratios for three mouthing activities, and variations in particle size distributions under various conditions. Results indicated that sand caused highe...

Hands On Earth Science.

ERIC Educational Resources Information Center

Weisgarber, Sherry L.; Van Doren, Lisa; Hackathorn, Merrianne; Hannibal, Joseph T.; Hansgen, Richard

This publication is a collection of 13 hands-on activities that focus on earth science-related activities and involve students in learning about growing crystals, tectonics, fossils, rock and minerals, modeling Ohio geology, geologic time, determining true north, and constructing scale-models of the Earth-moon system. Each activity contains…

Hands-On Calculus

ERIC Educational Resources Information Center

Sutherland, Melissa

2006-01-01

In this paper we discuss manipulatives and hands-on investigations for Calculus involving volume, arc length, and surface area to motivate and develop formulae which can then be verified using techniques of integration. Pre-service teachers in calculus courses using these activities experience a classroom in which active learning is encouraged and…

Design and validation of low-cost assistive glove for hand assessment and therapy during activity of daily living-focused robotic stroke therapy.

PubMed

Nathan, Dominic E; Johnson, Michelle J; McGuire, John R

2009-01-01

Hand and arm impairment is common after stroke. Robotic stroke therapy will be more effective if hand and upper-arm training is integrated to help users practice reaching and grasping tasks. This article presents the design, development, and validation of a low-cost, functional electrical stimulation grasp-assistive glove for use with task-oriented robotic stroke therapy. Our glove measures grasp aperture while a user completes simple-to-complex real-life activities, and when combined with an integrated functional electrical stimulator, it assists in hand opening and closing. A key function is a new grasp-aperture prediction model, which uses the position of the end-effectors of two planar robots to define the distance between the thumb and index finger. We validated the accuracy and repeatability of the glove and its capability to assist in grasping. Results from five nondisabled subjects indicated that the glove is accurate and repeatable for both static hand-open and -closed tasks when compared with goniometric measures and for dynamic reach-to-grasp tasks when compared with motion analysis measures. Results from five subjects with stroke showed that with the glove, they could open their hands but without it could not. We present a glove that is a low-cost solution for in vivo grasp measurement and assistance.

Driver hand activity analysis in naturalistic driving studies: challenges, algorithms, and experimental studies

NASA Astrophysics Data System (ADS)

Ohn-Bar, Eshed; Martin, Sujitha; Trivedi, Mohan Manubhai

2013-10-01

We focus on vision-based hand activity analysis in the vehicular domain. The study is motivated by the overarching goal of understanding driver behavior, in particular as it relates to attentiveness and risk. First, the unique advantages and challenges for a nonintrusive, vision-based solution are reviewed. Next, two approaches for hand activity analysis, one relying on static (appearance only) cues and another on dynamic (motion) cues, are compared. The motion-cue-based hand detection uses temporally accumulated edges in order to maintain the most reliable and relevant motion information. The accumulated image is fitted with ellipses in order to produce the location of the hands. The method is used to identify three hand activity classes: (1) two hands on the wheel, (2) hand on the instrument panel, (3) hand on the gear shift. The static-cue-based method extracts features in each frame in order to learn a hand presence model for each of the three regions. A second-stage classifier (linear support vector machine) produces the final activity classification. Experimental evaluation with different users and environmental variations under real-world driving shows the promise of applying the proposed systems for both postanalysis of captured driving data as well as for real-time driver assistance.

OARSI Clinical Trials Recommendations: Design and conduct of clinical trials for hand osteoarthritis.

PubMed

Kloppenburg, M; Maheu, E; Kraus, V B; Cicuttini, F; Doherty, M; Dreiser, R-L; Henrotin, Y; Jiang, G-L; Mandl, L; Martel-Pelletier, J; Nelson, A E; Neogi, T; Pelletier, J-P; Punzi, L; Ramonda, R; Simon, L S; Wang, S

2015-05-01

Hand osteoarthritis (OA) is a very frequent disease, but yet understudied. However, a lot of works have been published in the past 10 years, and much has been done to better understand its clinical course and structural progression. Despite this new knowledge, few therapeutic trials have been conducted in hand OA. The last OARSI recommendations for the conduct of clinical trials in hand OA dates back to 2006. The present recommendations aimed at updating previous recommendations, by incorporating new data. The purpose of this expert opinion, consensus driven exercise is to provide evidence-based guidance on the design, execution and analysis of clinical trials in hand OA, where published evidence is available, supplemented by expert opinion, where evidence is lacking, to perform clinical trials in hand OA, both for symptom and for structure-modification. They indicate core outcome measurement sets for studies in hand OA, and list the methods and instruments that should be used to measure symptoms or structure. For both symptom- and structure-modification, at least pain, physical function, patient global assessment, HR-QoL, joint activity and hand strength should be assessed. In addition, for structure-modification trials, structural progression should be measured by radiographic changes. We also provide a research agenda listing many unsolved issues that seem to most urgently need to be addressed from the perspective of performing "good" clinical trials in hand OA. These updated OARSI recommendations should allow for better standardizing the conduct of clinical trials in hand OA in the next future. Copyright © 2015 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

Motion of the drawing hand induces a progressive increase in muscle activity of the non-dominant hand in Ramachandran's mirror-box therapy.

PubMed

Furukawa, Kiminobu; Suzuki, Harue; Fukuda, Jun

2012-11-01

To observe the real-time muscle activity of bilateral hands while subjects draw circles under 2 conditions: with and without using Ramachandran's mirror-box. A total of 24 healthy volunteers. Subjects drew 4 circles sequentially using their dominant hand with the other hand at rest, both with and without looking at a mirror image. Circles were marked by 8 dots on the paper, which subjects connected up to draw the shape. The activity of the bilateral first dorsal interosseus muscles was recorded using surface electromyography. Muscle activity of the dominant hand remained constant during each task. In contrast, muscle activity of the non-dominant hand increased under the condition of watching the image in the mirror, but was low under the non-watching condition. Furthermore, muscle activity of the non-dominant hand increased over the duration of the task. However, wide variation between subjects was observed under the mirror-image condition. Increased muscle action potential of the non-dominant hand may be induced by the circle drawing task of the dominant hand during Ramachandran's mirror-box therapy, which supports previous observations of increased brain activity caused by watching a mirror image.

Hands-on Science. Exploring Magnification.

ERIC Educational Resources Information Center

Kepler, Lynne

1993-01-01

Presents hands-on science activities using inexpensive, hand-held microscopes and slides made from simple, readily available materials. The article describes how to introduce students to microscopes and presents directions for using the microscopes and making slides. A student page investigates fingerprints with microscopes. (SM)

An Active Learning Exercise for Product Design from an Operations Perspective

ERIC Educational Resources Information Center

Hill, Stephen; Baker, Elizabeth

2016-01-01

Product design is a topic that is regularly covered in introductory operations management courses. However, a pedagogical challenge exists related to the presentation of introductory-level product design in a way that promotes active learning. The hands-on exercise presented in this article provides instructors with an activity that gives students…

Hand-held spectrophotometer design for textile fabrics

NASA Astrophysics Data System (ADS)

Böcekçi, Veysel Gökhan; Yıldız, Kazım

2017-09-01

In this study, a hand-held spectrophotometer was designed by taking advantage of the developments in modern optoelectronic technology. Spectrophotometer devices are used to determine the color information from the optic properties of the materials. As an alternative to a desktop spectrophotometer device we have implemented, it is the first prototype, low cost and portable. The prototype model designed for the textile industry can detect the color tone of any fabric. The prototype model consists of optic sensor, processor, display floors. According to the color applied on the optic sensor, it produces special frequency information on its output at that color value. In Arduino type processor, the frequency information is evaluated by the program we have written and the color tone information between 0-255 ton is decided and displayed on the screen.

Cerebral activations related to writing and drawing with each hand.

PubMed

Potgieser, Adriaan R E; van der Hoorn, Anouk; de Jong, Bauke M

2015-01-01

Writing is a sequential motor action based on sensorimotor integration in visuospatial and linguistic functional domains. To test the hypothesis of lateralized circuitry concerning spatial and language components involved in such action, we employed an fMRI paradigm including writing and drawing with each hand. In this way, writing-related contributions of dorsal and ventral premotor regions in each hemisphere were assessed, together with effects in wider distributed circuitry. Given a right-hemisphere dominance for spatial action, right dorsal premotor cortex dominance was expected in left-hand writing while dominance of the left ventral premotor cortex was expected during right-hand writing. Sixteen healthy right-handed subjects were scanned during audition-guided writing of short sentences and simple figure drawing without visual feedback. Tapping with a pencil served as a basic control task for the two higher-order motor conditions. Activation differences were assessed with Statistical Parametric Mapping (SPM). Writing and drawing showed parietal-premotor and posterior inferior temporal activations in both hemispheres when compared to tapping. Drawing activations were rather symmetrical for each hand. Activations in left- and right-hand writing were left-hemisphere dominant, while right dorsal premotor activation only occurred in left-hand writing, supporting a spatial motor contribution of particularly the right hemisphere. Writing contrasted to drawing revealed left-sided activations in the dorsal and ventral premotor cortex, Broca's area, pre-Supplementary Motor Area and posterior middle and inferior temporal gyri, without parietal activation. The audition-driven postero-inferior temporal activations indicated retrieval of virtual visual form characteristics in writing and drawing, with additional activation concerning word form in the left hemisphere. Similar parietal processing in writing and drawing pointed at a common mechanism by which such visually

Cerebral Activations Related to Writing and Drawing with Each Hand

PubMed Central

Potgieser, Adriaan R. E.; van der Hoorn, Anouk; de Jong, Bauke M.

2015-01-01

Background Writing is a sequential motor action based on sensorimotor integration in visuospatial and linguistic functional domains. To test the hypothesis of lateralized circuitry concerning spatial and language components involved in such action, we employed an fMRI paradigm including writing and drawing with each hand. In this way, writing-related contributions of dorsal and ventral premotor regions in each hemisphere were assessed, together with effects in wider distributed circuitry. Given a right-hemisphere dominance for spatial action, right dorsal premotor cortex dominance was expected in left-hand writing while dominance of the left ventral premotor cortex was expected during right-hand writing. Methods Sixteen healthy right-handed subjects were scanned during audition-guided writing of short sentences and simple figure drawing without visual feedback. Tapping with a pencil served as a basic control task for the two higher-order motor conditions. Activation differences were assessed with Statistical Parametric Mapping (SPM). Results Writing and drawing showed parietal-premotor and posterior inferior temporal activations in both hemispheres when compared to tapping. Drawing activations were rather symmetrical for each hand. Activations in left- and right-hand writing were left-hemisphere dominant, while right dorsal premotor activation only occurred in left-hand writing, supporting a spatial motor contribution of particularly the right hemisphere. Writing contrasted to drawing revealed left-sided activations in the dorsal and ventral premotor cortex, Broca’s area, pre-Supplementary Motor Area and posterior middle and inferior temporal gyri, without parietal activation. Discussion The audition-driven postero-inferior temporal activations indicated retrieval of virtual visual form characteristics in writing and drawing, with additional activation concerning word form in the left hemisphere. Similar parietal processing in writing and drawing pointed at a

Prosthetic design directives: Low-cost hands within reach.

PubMed

Jones, G K; Rosendo, A; Stopforth, R

2017-07-01

Although three million people around the world suffer from the lack of one or both upper limbs 80% of this number is located within developing countries. While prosthetic prices soar with technology 3D printing and low cost electronics present a sensible solution for those that cannot afford expensive prosthetics. The electronic and control design of a low-cost prosthetic hand, the Touch Hand II, is discussed. This paper shows that sensorless techniques can be used to reduce design complexities, costs, and provide easier access to the electronics. A closing and opening finite state machine (COFSM) was developed to handle the actuated digit joint control state and a supervisory switching control scheme, used for speed and grip strength control. Three torque and speed settings were created to be preset for specific grasps. The hand was able to replicate ten frequently used grasps and grip some common objects. Future work is necessary to enable a user to control it with myoelectric signals (MESs) and to solve operational problems related to electromagnetic interference (EMI).

Smart hands for the EVA retriever

NASA Technical Reports Server (NTRS)

Hess, Clifford W.; Li, Larry C.

1990-01-01

Dexterous, robotic hands are required for the extravehicular activity retriever (EVAR) system being developed by the NASA Johnson Space Center (JSC). These hands, as part of the EVAR system, must be able to grasp objects autonomously and securely which inadvertently separate from the Space Station. Development of the required hands was initiated in 1987. Outlined here are the hand development activities, including design considerations, progress to date, and future plans. Several types of dexterous hands that were evaluated, along with a proximity-sensing capability that was developed to initiate a reflexive, adaptive grasp, are described. The evaluations resulted in the design and fabrication of a 6-degree-of-freedom (DOF) hand that has two fingers and a thumb arranged in an anthropomorphic configuration. Finger joint force and position sensors are included in the design, as well as infrared proximity sensors which allow initiation of the grasp sequence when an object is detected within the grasp envelope.

Hands-on Humidity.

ERIC Educational Resources Information Center

Pankiewicz, Philip R.

1992-01-01

Presents five hands-on activities that allow students to detect, measure, reduce, and eliminate moisture. Students make a humidity detector and a hygrometer, examine the effects of moisture on different substances, calculate the percent of water in a given food, and examine the absorption potential of different desiccants. (MDH)

Developing hands-on ergonomics lessons for youth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C; Alexandre, M; Jacobs, K

2006-02-22

By the time students are ready to enter the workforce they have been exposed to up to 20 years of ergonomics risk factors. As technology evolves, it provides more opportunities for intensive repetitive motion and with computers, cell phones, personal digital assistants (PDAs), and electronic games. The average student engages in fewer active physical activities, sit stationary in mismatched furniture in schools for hours and carry heavy backpacks. While long-term effects remain to be identified, increasingly ergonomists and others concerned with musculoskeletal health and wellness, see a need for early ergonomics education. This interactive session provides a hands-on approach tomore » introducing ergonomics to students. Although different approaches may effectively introduce ergonomics at even early stages of development, this program was designed for youth at the middle to high school age. Attendees will participate in four activities designed to introduce ergonomics at an experiential level. The modules focus on grip strength, effective breathing, optimizing your chair, and backpack safety. The workshop will include presentation and worksheets designed for use by teachers with minimal ergonomics training. Feedback from the participants will be sought for further refining the usability and safety of the training package.« less

Learning about Modes in Atomic Force Microscopy by Means of Hands-On Activities Based on a Simple Apparatus

ERIC Educational Resources Information Center

Phuapaiboon, Unchada; Panijpan, Bhinyo; Osotchan, Tanakorn

2009-01-01

This study was conducted to examine the results of using a low-cost hands-on setup in combination with accompanying activities to promote understanding of the contact mode of atomic force microscopy (AFM). This contact mode setup enabled learners to study how AFM works by hand scanning using probing cantilevers with different characteristics on…

Design of a terminal pointer hand controller for teleoperator applications

NASA Technical Reports Server (NTRS)

Saenger, E. L.; Woltosz, W. S.

1973-01-01

The design is described of a hand controller intended to achieve the highest possible compatibility with the hand of the human operator in a teleoperator system. Concepts drawings and model development are discussed along with the development of a prototype, and the mathematical control laws.

Fashion Design: Designing a Learner-Active, Multi-Level High School Course

ERIC Educational Resources Information Center

Nelson, Diane

2009-01-01

A high school fashion design teacher has much in common with the ringmaster of a three-ring circus. The challenges of teaching a hands-on course are to facilitate the entire class and to meet the needs of individual students. When teaching family and consumer sciences, the goal is to have a learner-active classroom. Revamping the high school's…

Cerebral activation evoked by the mirror illusion of the hand in stroke patients compared to normal subjects.

PubMed

Wang, Jing; Fritzsch, Claire; Bernarding, Johannes; Krause, Thomas; Mauritz, Karl-Heinz; Brunetti, Maddalena; Dohle, Christian

2013-01-01

Mirror therapy (MT) was found to improve motor function after stroke, but its neural mechanisms remain unclear, especially in single stroke patients. The following imaging study was designed to compare brain activation patterns evoked by the mirror illusion in single stroke patients with normal subjects. Fifteen normal volunteers and five stroke patients with severe arm paresis were recruited. Cerebral activations during movement mirroring by means of a video chain were recorded with functional magnetic resonance imaging (fMRI). Single-subject analysis was performed using SPM 8. For normal subjects, ten and thirteen subjects displayed lateralized cerebral activations evoked by the mirror illusion while moving their right and left hand respectively. The magnitude of this effect in the precuneus contralateral to the seen hand was not dependent on movement speed or subjective experience. Negative correlation of activation strength with age was found for the right hand only. The activation pattern in stroke patients is comparable to that of normal subjects and present in four out of five patients. In summary, the mirror illusion can elicit cerebral activation contralateral to the perceived hand in the majority of single normal subjects, but not in all of them. This is similar even in stroke patients with severe hemiparesis.

Hand motor activity, cognition, mood, and the rest-activity rhythm in dementia: a clustered RCT.

PubMed

Eggermont, Laura H P; Knol, Dirk L; Hol, Elly M; Swaab, Dick F; Scherder, Erik J A

2009-01-23

Physical activity such as walking may exert a positive impact on cognition and behaviour in older persons with dementia, but due to the frailty of the population it may be worthwhile to consider other motor activities as well. Examining the effects of hand motor activity on cognition, mood and the rest-activity rhythm in older persons with dementia. Sixty-one older nursing home residents with dementia (mean age 84.6 years) were randomly assigned to either a hand movement program (experimental) or read aloud program (control) for 30min, 5 days a week, during 6 weeks. Neuropsychological tests, mood questionnaires, and actigraphy data were assessed at baseline, after 6 weeks, and again after 6 weeks. Apolipoprotein epsilon (ApoE) genotype was determined. Scores on neuropsychological tests were combined and formed specific Cognitive domains. Symptoms of depression and anxiety formed the Mood domain. Actigraphy variables composed the Rest-activity domain. In mixed model analyses no significant group x time interactions were found on either the Cognitive, Mood or Rest-activity domains in the intention-to-treat analysis. In the per protocol analysis, that included people who attended at least 80% of the sessions, mood improved only in the experimental group. No significant time x group x ApoE interaction effects were found in either analysis. In older nursing home residents with dementia, increased attendance to the hand movement program appeared to have a positive effect on mood. Hand motor activity is a type of activity that can be applied at a large scale.

Bio-inspired mechanical design of a tendon-driven dexterous prosthetic hand.

PubMed

Controzzi, Marco; Cipriani, Christian; Jehenne, Beryl; Donati, Marco; Carrozza, Maria Chiara

2010-01-01

This paper presents the preliminary design of a new dexterous upper-limb prosthesis provided with a novel anthropomorphic hand, a compact wrist based on bevel gears and a modular forearm able to cover different levels of upper-limb amputations. The hand has 20 DoFs and 11 motors, with a dexterous three fingered subsystem composed by a fully actuated thumb, and an hybrid index and middle fingers to enable dexterous manipulation and enhance grasp performance.

Hands-On Hydrology

ERIC Educational Resources Information Center

Mathews, Catherine E.; Monroe, Louise Nelson

2004-01-01

A professional school and university collaboration enables elementary students and their teachers to explore hydrology concepts and realize the beneficial functions of wetlands. Hands-on experiences involve young students in determining water quality at field sites after laying the groundwork with activities related to the hydrologic cycle,…

Hands-on Science. Why Do Mittens Work?

ERIC Educational Resources Information Center

Kepler, Lynne

1996-01-01

This article presents hands-on, experiential science activities that use mittens to teach elementary students about classification and insulation. The first involves children sorting mittens. The second has them find out for themselves why mittens keep their hands warm. Across-the-curriculum activities are also described. (SM)

Design of a wearable hand exoskeleton for exercising flexion/extension of the fingers.

PubMed

Jo, Inseong; Lee, Jeongsoo; Park, Yeongyu; Bae, Joonbum

2017-07-01

In this paper, design of a wearable hand exoskeleton system for exercising flexion/extension of the fingers, is proposed. The exoskeleton was designed with a simple and wearable structure to aid finger motions in 1 degree of freedom (DOF). A hand grasping experiment by fully-abled people was performed to investigate general hand flexion/extension motions and the polynomial curve of general hand motions was obtained. To customize the hand exoskeleton for the user, the polynomial curve was adjusted to the joint range of motion (ROM) of the user and the optimal design of the exoskeleton structure was obtained using the optimization algorithm. A prototype divided into two parts (one part for the thumb, the other for rest fingers) was actuated by only two linear motors for compact size and light weight.

"Sharks in Your Hands"--A Case Study on Effects of Teaching Strategies to Change Knowledge and Attitudes towards Sharks

ERIC Educational Resources Information Center

Lee, Hung-Shan; Liu, Shiang-Yao; Yeh, Ting-Kuang

2016-01-01

This study was designed to exemplify how hands-on based teaching strategies enhanced students' knowledge and positive attitudes towards sharks. Hands-on activities for sharks' biological and morphological features were carried out. Eleven elementary school students from a remote area in Taiwan were recruited and assigned to the hands-on condition.…

A bio-inspired design of a hand robotic exoskeleton for rehabilitation

NASA Astrophysics Data System (ADS)

Ong, Aira Patrice R.; Bugtai, Nilo T.

2018-02-01

This paper presents the methodology for the design of a five-degree of freedom wearable robotic exoskeleton for hand rehabilitation. The design is inspired by the biological structure and mechanism of the human hand. One of the distinct features of the device is the cable-driven actuation, which provides the flexion and extension motion. A prototype of the orthotic device has been developed to prove the model of the system and has been tested in a 3D printed mechanical hand. The result showed that the proposed device was consistent with the requirements of bionics and was able to demonstrate the flexion and extension of the system.

Usability test of a hand exoskeleton for activities of daily living: an example of user-centered design.

PubMed

Almenara, Maria; Cempini, Marco; Gómez, Cristina; Cortese, Mario; Martín, Cristina; Medina, Josep; Vitiello, Nicola; Opisso, Eloy

2017-01-01

(1) To assess a robotic device (Handexos) during the design process with regard to usability, end user satisfaction and safety, (2) to determine whether Handexos can improve the activities of daily living (ADLs) of spinal cord injury (SCI) patients and stroke patients with upper-limb dysfunction. During a 2-year development stage of the device, a total of 37 participants (aged 22-68), 28 clinicians (experts) and nine patients with SCI or stroke (end users) were included in a user-centered design process featuring usability tests. They performed five grasps wearing the device. The assessments were obtained at the end of the session by filling out a questionnaire and making suggestions. The experts' opinion was that the modified device was an improvement over the preliminary version, although this was not reflected in the scores. Whereas end user scores for comfort, grasp, performance and safety were above the sufficiency threshold, the scores for year 2 were lower than those for year 1. The findings demonstrate that although Handexos meets the initial functional requirements and underlines the potential for assisting SCI and post-stroke subjects in ADLs, several aspects such as mechanical complexity and low adaptability to different hand sizes need to be further addressed. Implications for Rehabilitation Wearable robotics devices could improve the activities of daily living in patients with spinal cord injury or stroke. They could be a tool for rehabilitation of the upper limb. Further usability tests to improve this type of tools are recommended.

How a smiley protects health: A pilot intervention to improve hand hygiene in hospitals by activating injunctive norms through emoticons

PubMed Central

Tsivrikos, Dimitrios; Dollinger, Daniel; Lermer, Eva

2018-01-01

Hand hygiene practice in hospitals is unfortunately still widely insufficient, even though it is known that transmitting pathogens via hands is the leading cause of healthcare-associated infections. Previous research has shown that improving knowledge, providing feedback on past behaviour and targeting social norms are promising approaches to improve hand hygiene practices. The present field experiment was designed to direct people on when to perform hand hygiene and prevent forgetfulness. This intervention is the first to examine the effect of inducing injunctive social norms via an emoticon-based feedback system on hand hygiene behaviour. Electronic monitoring and feedback devices were installed in hospital patient rooms on top of hand-rub dispensers, next to the doorway, for a period of 17 weeks. In the emoticon condition, screens at the devices activated whenever a person entered or exited the room. Before using the alcohol-based hand-rub dispenser, a frowny face was displayed, indicating that hand hygiene should be performed. If the dispenser was subsequently used, this picture changed to a smiley face to positively reinforce the correct behaviour. Hand hygiene behaviour in the emoticon rooms significantly outperformed the behaviour in three other tested conditions. The strong effect in this field experiment indicates that activating injunctive norms may be a promising approach to improve hand hygiene behaviour. Theoretical and practical implications of these findings are discussed. PMID:29782516

Musculoskeletal Problems in Iranian Hand-Woven Shoe-Sole Making Operation and Developing Guidelines for Workstation Design.

PubMed

Veisi, H; Choobineh, A R; Ghaem, H

2016-04-01

Musculoskeletal disorders (MSDs) are among important health problems in working population. Because of performing difficult physical activities, hand-woven shoe-sole makers are at risk of developing various types of MSDs. To determine the prevalence of musculoskeletal symptoms in different body areas of hand-woven shoe-sole makers, assess workers' postures and workstations, evaluate ergonomic and individual factors associated with MSDs, and develop guidelines for designing hand-woven shoe-sole making workstation. In this cross-sectional study, the prevalence of MSDs symptoms and their risk factors were studied among 240 hand-woven shoe-sole makers. Working posture and workstations were ergonomically assessed as well. The data were collected through interviewing and using Nordic musculoskeletal questionnaire and by direct observation of posture using RULA method. Logistic regression analysis was used to determine risk factors associated with MSDs symptoms. The prevalence and severity of MSDs symptoms were high among the study population. Ergonomic factors including daily working time, working posture, and force exertion, as well as individual factors, such as age, job tenure, and education were significantly associated with MSDs symptoms. It seems that the majority of ergonomics shortcomings originate from poorly designed workstation. Some general guidelines for designing shoe-sole making workstation are presented.

Investigating Plants: Hands-On, Low-Cost Laboratory Exercises in Plant Science.

ERIC Educational Resources Information Center

Sinclair, Thomas R.; Johnson, Marty

This manual describes 14 hands-on exercises for middle school introductory biology courses that are designed to allow all students to be involved in self-discoveries about life and plant life in particular. The exercises were developed to supplement normal classroom activities by allowing students to initiate ongoing projects to investigate the…

Design of an Inertial-Sensor-Based Data Glove for Hand Function Evaluation.

PubMed

Lin, Bor-Shing; Lee, I-Jung; Yang, Shu-Yu; Lo, Yi-Chiang; Lee, Junghsi; Chen, Jean-Lon

2018-05-13

Capturing hand motions for hand function evaluations is essential in the medical field. Various data gloves have been developed for rehabilitation and manual dexterity assessments. This study proposed a modular data glove with 9-axis inertial measurement units (IMUs) to obtain static and dynamic parameters during hand function evaluation. A sensor fusion algorithm is used to calculate the range of motion of joints. The data glove is designed to have low cost, easy wearability, and high reliability. Owing to the modular design, the IMU board is independent and extensible and can be used with various microcontrollers to realize more medical applications. This design greatly enhances the stability and maintainability of the glove.

Partnership with informal education learning centers to develop hands-on activities for research outreach efforts

NASA Astrophysics Data System (ADS)

Courville, Z.; Haynes, R.; DeFrancis, G.; Koh, S.; Ringelberg, D.

2012-12-01

Outreach informed by scientific research plays an important role in fostering interest in science by making science and scientists accessible, fun, and interesting. Developing an interest in science in young, elementary-aged students through outreach is a rewarding endeavor for researchers, in that audiences are usually receptive, requirements for broader impacts are met, and bonds are formed between researchers and members of their local and surrounding communities. Promoting such interest among young students is imperative not only for an individual researcher's own self interest, but also for the strength of American science and innovation moving forward, and is the responsibility of the current generation of scientists. Developing genuine and successful inquiry-based, hands-on activities for elementary-aged students is outside the expertise of many researchers. Partnering with an informal education learning center (i.e. science museum or after-school program) provides researchers with the expertise they might be lacking in such endeavors. Here, we present a series of polar-, engineering- and microbiology-themed hands-on activities that have been developed by researchers at a government lab in partnership with a local science museum. Through a series of workshops, the science education staff at the museum provided researchers with background and instruction on inquiry and hands-on activities, and then collaborated with the researchers to develop activities which were later demonstrated at the museum to museum-goers. Education staff provided feedback about the presentation of the activities for further refinement. The program provided an opportunity for researchers to develop fun, on-target and age-appropriate science activities for elementary-aged students, an audience for outreach, and enabled general public audiences the chance to interact with researchers and scientists in an informal setting.

Effects of motor imagery and action observation on hand grip strength, electromyographic activity and intramuscular oxygenation in the hand gripping gesture: A randomized controlled trial.

PubMed

Losana-Ferrer, Alejandro; Manzanas-López, Sergio; Cuenca-Martínez, Ferran; Paris-Alemany, Alba; La Touche, Roy

2018-04-01

The aim of this study was to evaluate the effects of motor imagery and action observation combined with a hand grip strength program on the forearm muscles. Sixty subjects were selected and randomized into three groups: motor imagery (n = 20), action observation (n = 20), or a control group (n = 20). Outcome measures included hand grip strength, electromyographical activity and intramuscular oxygenation. The hand grip strength significantly increased in the motor imagery (p < .001) and action observation (p < .001) groups compared with the control group, although there were no differences between the both groups (p = .30). In the electromyographical activity, intra-group significant differences were found in motor imagery (p = .002) and action observation (p = .003) groups, although there were no differences between the both groups (p = 1.00) Intramuscular oxygenation results did not show any statistically significant differences between any of the study groups (p > .05). Our results suggest that both motor imagery and action observation training, combined with a hand grip strength program, present a significant strength gain and significant change in the strength and electromyographical activity of the forearm muscles, however no change was found in intramuscular oxygenation. Copyright © 2018 Elsevier B.V. All rights reserved.

Exploratory study on the effects of a robotic hand rehabilitation device on changes in grip strength and brain activity after stroke.

PubMed

Pinter, Daniela; Pegritz, Sandra; Pargfrieder, Christa; Reiter, Gudrun; Wurm, Walter; Gattringer, Thomas; Linderl-Madrutter, Regina; Neuper, Claudia; Fazekas, Franz; Grieshofer, Peter; Enzinger, Christian

2013-01-01

The brain mechanisms underlying successful recovery of hand fuenction after stroke are still not fully understood, although functional MRI (fMRI) studies underline the importance of neuronal plasticity. We explored potential changes in brain activity in 7 patients with subacute to chronic stroke (69 ± 8 years) with moderate- to high-grade distal paresis of the upper limb (Motricity Index: 59.4) after standardized robotic finger-hand rehabilitation training, in addition to conventional rehabilitation therapy for 3 weeks. Behavioral and fMRI assessments were carried out before and after training to characterize changes in brain activity and behavior. The Motricity Index (pre: 59.4, post: 67.2, P < .05) and grip force (pre: 7.26, post: 11.87, P < .05) of the paretic hand increased significantly after rehabilitation. On fMRI, active movement of the affected (left) hand resulted in contralesional (ie, ipsilateral) activation of the primary sensorimotor cortex prior to rehabilitation. After rehabilitation, activation appeared "normalized," including the ipsilesional primary sensorimotor cortex and supplementary motor area (SMA). No changes and no abnormalities of activation maps were seen during movement of the unaffected hand. Subsequent region-of-interest analyses showed no significant ipsilesional activation increases after rehabilitation. Despite behavioral improvements, we failed to identify consistent patterns of functional reorganization in our sample. This warrants caution in the use of fMRI as a tool to explore neural plasticity in heterogeneous samples lacking sufficient statistical power.

Alignment of Hands-On STEM Engagement Activities with Positive STEM Dispositions in Secondary School Students

ERIC Educational Resources Information Center

Christensen, Rhonda; Knezek, Gerald; Tyler-Wood, Tandra

2015-01-01

This study examines positive dispositions reported by middle school and high school students participating in programs that feature STEM-related activities. Middle school students participating in school-to-home hands-on energy monitoring activities are compared to middle school and high school students in a different project taking part in…

Associations of work activities requiring pinch or hand grip or exposure to hand-arm vibration with finger and wrist osteoarthritis: a meta-analysis.

PubMed

Hammer, Paula E C; Shiri, Rahman; Kryger, Ann I; Kirkeskov, Lilli; Bonde, Jens Peter

2014-03-01

We systematically reviewed the epidemiologic evidence linking finger and wrist osteoarthritis (OA) with work activities requiring pinch or hand grip or exposure to hand-arm vibration (HAV). PubMed and Embase databases were searched up to June 2013. We selected studies assessing the associations of radiographic diagnosed finger and/or wrist joint OA with work activities involving pinch or hand grip or exposure to HAV. We used specific criteria to evaluate completeness of reporting, potential confounding, and bias. Pooled odds ratios (OR) were computed using random-effects meta-analyses. Of the 19 studies included, 17 were cross-sectional, 1 was a prospective cohort, and 1 a case-control study. The meta-analyses of studies that controlled their estimates for at least age and gender showed the associations of pinch grip work with proximal interphalangeal joint [OR 1.56, 95% confidence interval (95% CI) 1.09-2.23] and the first carpometacarpal joint OA (OR 2.10, 95% CI 1.06-4.17), but not with distal interphalangeal, metacarpalphalangeal, or wrist joints OA. Hand grip work and exposure to HAV were not associated with any finger or wrist OA. Epidemiological studies provide limited evidence that pinch grip may increase the risk of wrist or finger OA, but causal relation cannot be resolved because of cross-sectional designs and inadequate characterization of biomechanical strain to the hand and wrist.

Relationship between speed and EEG activity during imagined and executed hand movements

NASA Astrophysics Data System (ADS)

Yuan, Han; Perdoni, Christopher; He, Bin

2010-04-01

The relationship between primary motor cortex and movement kinematics has been shown in nonhuman primate studies of hand reaching or drawing tasks. Studies have demonstrated that the neural activities accompanying or immediately preceding the movement encode the direction, speed and other information. Here we investigated the relationship between the kinematics of imagined and actual hand movement, i.e. the clenching speed, and the EEG activity in ten human subjects. Study participants were asked to perform and imagine clenching of the left hand and right hand at various speeds. The EEG activity in the alpha (8-12 Hz) and beta (18-28 Hz) frequency bands were found to be linearly correlated with the speed of imagery clenching. Similar parametric modulation was also found during the execution of hand movements. A single equation relating the EEG activity to the speed and the hand (left versus right) was developed. This equation, which contained a linear independent combination of the two parameters, described the time-varying neural activity during the tasks. Based on the model, a regression approach was developed to decode the two parameters from the multiple-channel EEG signals. We demonstrated the continuous decoding of dynamic hand and speed information of the imagined clenching. In particular, the time-varying clenching speed was reconstructed in a bell-shaped profile. Our findings suggest an application to providing continuous and complex control of noninvasive brain-computer interface for movement-impaired paralytics.

Implementing the Constructed Scaffold Model: Hands-On Activity Units for Advanced Placement Calculus

ERIC Educational Resources Information Center

Scott, Susan

2017-01-01

The purpose of the present action research study is to describe a hands-on activity model, named the Constructed Scaffold Model (CSM), used in an Advanced Placement Calculus class in a southeastern United States suburban high school. Data were collected over an 8-week period during the spring 2017 semester. The teacher-researcher developed a…

Access to hands-on mathematics measurement activities using robots controlled via speech generating devices: three case studies.

PubMed

Adams, Kim; Cook, Al

2014-07-01

To examine how using a robot controlled via a speech generating device (SGD) influences the ways students with physical and communication limitations can demonstrate their knowledge in math measurement activities. Three children with severe physical disabilities and complex communication needs used the robot and SGD system to perform four math measurement lessons in comparing, sorting and ordering objects. The performance of the participants was measured and the process of using the system was described in terms of manipulation and communication events. Stakeholder opinions were solicited regarding robot use. Robot use revealed some gaps in the procedural knowledge of the participants. Access to both the robot and SGD was shown to provide several benefits. Stakeholders thought the intervention was important and feasible for a classroom environment. The participants were able to participate actively in the hands-on and communicative measurement activities and thus meet the demands of current math instruction methods. Current mathematics pedagogy encourages doing hands-on activities while communicating about concepts. Adapted Lego robots enabled children with severe physical disabilities to perform hands-on length measurement activities. Controlling the robots from speech generating devices (SGD) enabled the children, who also had complex communication needs, to reflect and report on results during the activities. By using the robots combined with SGDs, children both exhibited their knowledge of and experienced the concepts of mathematical measurements.

Hand-arm Vibration Effects on Performance, Tactile Acuity, and Temperature of Hand

PubMed Central

Forouharmajd, Farhad; Yadegari, Mehrdad; Ahmadvand, Masoumeh; Forouharmajd, Farshad; Pourabdian, Siamak

2017-01-01

Effects of vibration appear as mechanical and psychological disorders, including stress reactions, cognitive and movement disorders, problem in concentration and paying attention to the assigned duties. The common signs and symptoms of hand-arm vibration (HAV) in the fingers and hands may appear as pins and needles feeling, tingling, numbness, and also the loss of finger sensation and dexterity. Laboratory Virtual Instrument Engineering Workbench programming software designed for occupational vibrations measurement was used to calculate HAV acceleration. Hole steadiness test is designed to measure involuntary movement of people. V-Pieron test is designed for one of the other aspects of the psycho motor phenomena of steadiness by moving the stylus across a V-form ruler. The two points test was an experiment of touch acuity, which used a caliper by placing the two styli very close on the pad of finger knuckles. The temperature of finger skin is also measured simultaneous to the above tests. Wilcoxon test indicated that a significant decrement in hand steadiness occurred after gripping a vibrating handle for 2 min (P ≤ 0.003). Wilcoxon test also represented a significant change in errors after gripping a grinder vibratory handle (P ≤ 0.003). The differences at all of the knuckles were significant with a confidence interval percentage of 99%. There was a significant reduction in finger skin temperature before and after exposure to vibration (mean = 0.45°C, based on paired sample test). The obtained results considerably demonstrated the relation between hand performance and vibrations due to gripping a grinder. It can be concluded that an injury or accident may happen after exposure to vibrations for the fine duties, in fast actions. PMID:29204383

Hand-arm Vibration Effects on Performance, Tactile Acuity, and Temperature of Hand.

PubMed

Forouharmajd, Farhad; Yadegari, Mehrdad; Ahmadvand, Masoumeh; Forouharmajd, Farshad; Pourabdian, Siamak

2017-01-01

Effects of vibration appear as mechanical and psychological disorders, including stress reactions, cognitive and movement disorders, problem in concentration and paying attention to the assigned duties. The common signs and symptoms of hand-arm vibration (HAV) in the fingers and hands may appear as pins and needles feeling, tingling, numbness, and also the loss of finger sensation and dexterity. Laboratory Virtual Instrument Engineering Workbench programming software designed for occupational vibrations measurement was used to calculate HAV acceleration. Hole steadiness test is designed to measure involuntary movement of people. V-Pieron test is designed for one of the other aspects of the psycho motor phenomena of steadiness by moving the stylus across a V-form ruler. The two points test was an experiment of touch acuity, which used a caliper by placing the two styli very close on the pad of finger knuckles. The temperature of finger skin is also measured simultaneous to the above tests. Wilcoxon test indicated that a significant decrement in hand steadiness occurred after gripping a vibrating handle for 2 min ( P ≤ 0.003). Wilcoxon test also represented a significant change in errors after gripping a grinder vibratory handle ( P ≤ 0.003). The differences at all of the knuckles were significant with a confidence interval percentage of 99%. There was a significant reduction in finger skin temperature before and after exposure to vibration (mean = 0.45°C, based on paired sample test). The obtained results considerably demonstrated the relation between hand performance and vibrations due to gripping a grinder. It can be concluded that an injury or accident may happen after exposure to vibrations for the fine duties, in fast actions.

Communicate science: an example of food related hands-on laboratory approach

NASA Astrophysics Data System (ADS)

D'Addezio, Giuliana; Marsili, Antonella; Vallocchia, Massimiliano

2014-05-01

The Laboratorio Didattica e Divulgazione Scientifica of the Istituto Nazionale di Geofisica e Vulcanologia (INGV's Educational and Outreach Laboratory) organized activity with kids to convey scientific knowledge and to promote research on Earth Science, focusing on volcanic and seismic hazard. The combination of games and learning in educational activity can be a valuable tool for study of complex phenomena. Hands-on activity may help in engage kids in a learning process through direct participation that significantly improves the learning performance of children. Making learning fun motivate audience to pay attention on and stay focused on the subject. We present the experience of the hand-on laboratory "Laboratorio goloso per bambini curiosi di scienza (a delicious hands-on laboratory for kids curious about science)", performed in Frascati during the 2013 European Researchers' Night, promoted by the European Commission, as part of the program organized by the Laboratorio Didattica e Divulgazione Scientifica in the framework of Associazione Frascati Scienza (http://www.frascatiscienza.it/). The hand-on activity were designed for primary schools to create enjoyable and unusual tools for learning Earth Science. During this activity kids are involved with something related to everyday life, such as food, through manipulation, construction and implementation of simple experiments related to Earth dynamics. Children become familiar with scientific concepts such as composition of the Earth, plates tectonic, earthquakes and seismic waves propagation and experience the effect of earthquakes on buildings, exploring their important implications for seismic hazard. During the activity, composed of several steps, participants were able to learn about Earth inner structure, fragile lithosphere, waves propagations, impact of waves on building ecc.., dealing with eggs, cookies, honey, sugar, polenta, flour, chocolate, candies, liquorice sticks, bread, pudding and sweets. The

Functional range of motion of the hand joints in activities of the International Classification of Functioning, Disability and Health.

PubMed

Gracia-Ibáñez, Verónica; Vergara, Margarita; Sancho-Bru, Joaquín L; Mora, Marta C; Piqueras, Catalina

Cross-sectional research design. Active range of motion (AROM) is used as indicator of hand function. However, functional range of motion (FROM) data are limited, and fail to represent activities of daily living (ADL). To estimate dominant hand FROM in flexion, abduction and palmar arching in people under 50 years of age performing ADL. AROMs and hand postures in 24 representative ADL of the International Classification of Functioning, Disability and Health (ICF) were recorded in 12 men and 12 women. FROM data were reported by activity and ICF area, and compared with AROMs. The relationship between ROM measures to gender and hand size was analyzed by correlation. FROM was 5° to 28° less than available AROM depending on the joint and movement performed. Joints do not necessarily move through full AROM while performing ADL which has benefits in retaining function despite loss of motion. This may also suggest that ADL alone are insufficient to retain or restore full AROM. Therapists should consider FROM requirements and normal AROM when defining hand therapy goals, interventions and evaluating the success of treatment. N/A. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

Do Predators Always Win? Starfish versus Limpets: A Hands-On Activity Examining Predator-Prey Interactions

ERIC Educational Resources Information Center

Faria, Claudia; Boaventura, Diana; Galvao, Cecilia; Chagas, Isabel

2011-01-01

In this article we propose a hands-on experimental activity about predator-prey interactions that can be performed both in a research laboratory and in the classroom. The activity, which engages students in a real scientific experiment, can be explored not only to improve students' understanding about the diversity of anti-predator behaviors but…

Enhancement of figural creativity by motor activation: effects of unilateral hand contractions on creativity are moderated by positive schizotypy.

PubMed

Rominger, Christian; Papousek, Ilona; Fink, Andreas; Weiss, Elisabeth M

2014-01-01

Creativity is an important trait necessary to achieve innovations in science, economy, arts and daily life. Therefore, the enhancement of creative performance is a significant field of investigation. A recent experiment showed enhanced verbal creativity after unilateral left-hand contractions, which was attributed to elevated activation of the right hemisphere. The present study aimed to extend these findings to the domain of figural creativity. Furthermore, as creativity and positive schizotypy may share some neurobiological underpinnings associated with the right hemisphere, we studied the potential moderating effect of positive schizotypy on the effects of the experimental modification of relative hemispheric activation on creativity. In a gender-balanced sample (20 men and 20 women), squeezing a hand gripper with the left hand enhanced figural creativity on the Torrance Test of Creative Thinking compared to squeezing the gripper with the right hand. However, this was only true when positive schizotypy was low. The moderating effect of schizotypy may be produced by relatively greater activity of certain parts of the right hemisphere being a shared neuronal correlate of creativity and positive schizotypy.

Design-validation of a hand exoskeleton using musculoskeletal modeling.

PubMed

Hansen, Clint; Gosselin, Florian; Ben Mansour, Khalil; Devos, Pierre; Marin, Frederic

2018-04-01

Exoskeletons are progressively reaching homes and workplaces, allowing interaction with virtual environments, remote control of robots, or assisting human operators in carrying heavy loads. Their design is however still a challenge as these robots, being mechanically linked to the operators who wear them, have to meet ergonomic constraints besides usual robotic requirements in terms of workspace, speed, or efforts. They have in particular to fit the anthropometry and mobility of their users. This traditionally results in numerous prototypes which are progressively fitted to each individual person. In this paper, we propose instead to validate the design of a hand exoskeleton in a fully digital environment, without the need for a physical prototype. The purpose of this study is thus to examine whether finger kinematics are altered when using a given hand exoskeleton. Therefore, user specific musculoskeletal models were created and driven by a motion capture system to evaluate the fingers' joint kinematics when performing two industrial related tasks. The kinematic chain of the exoskeleton was added to the musculoskeletal models and its compliance with the hand movements was evaluated. Our results show that the proposed exoskeleton design does not influence fingers' joints angles, the coefficient of determination between the model with and without exoskeleton being consistently high (R 2 ¯=0.93) and the nRMSE consistently low (nRMSE¯ = 5.42°). These results are promising and this approach combining musculoskeletal and robotic modeling driven by motion capture data could be a key factor in the ergonomics validation of the design of orthotic devices and exoskeletons prior to manufacturing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Hands on what? The relative effectiveness of physical versus virtual materials in an engineering design project by middle school children

NASA Astrophysics Data System (ADS)

Klahr, David; Triona, Lara M.; Williams, Cameron

2007-01-01

Hands-on activities play an important, but controversial, role in early science education. In this study we attempt to clarify some of the issues surrounding the controversy by calling attention to distinctions between: (a) type of instruction (direct or discovery); (b) type of knowledge to be acquired (domain-general or domain-specific); and (c) type of materials that are used (physical or virtual). We then describe an empirical study that investigates the relative effectiveness of the physical-virtual dimension. In the present study, seventh and eighth grade students assembled and tested mousetrap cars with the goal of designing a car that would go the farthest. Children were assigned to four different conditions, depending on whether they manipulated physical or virtual materials, and whether they had a fixed number of cars they could construct or a fixed amount of time in which to construct them. All four conditions were equally effective in producing significant gains in learners' knowledge about causal factors, in their ability to design optimal cars, and in their confidence in their knowledge. Girls' performance, knowledge, and effort were equal to boys' in all conditions, but girls' confidence remained below boys' throughout. Given the fact that, on several different measures, children were able to learn as well with virtual as with physical materials, the inherent pragmatic advantages of virtual materials in science may make them the preferred instructional medium in many hands-on contexts.

Hand activities in infantile masturbation: a video analysis of 13 cases.

PubMed

Hansen, Jonas Kjeldbjerg; Balslev, Thomas

2009-11-01

Infantile masturbation is considered a variant of normal behaviour. The abrupt and spontaneous onset, altered sensorium and autonomic phenomena during episodes may suggest an epileptic fit. Therefore, children with infantile masturbation are often admitted to hospital and undergo unnecessary tests. The purpose of the present study was to provide a detailed description of hand activities in infantile masturbation. The authors reviewed video recordings of 2 boys and 11 girls with infantile masturbation. Position, movements and activities of hands and fingers during episodes were registered. Five patterns of hand activities were registered: Fisting (four infants), grasping of toys, furniture or clothing (ten infants), chorea-like "piano playing" hand movements (two infants), pressure over the diaper/genital region (one infant) and bimanual manipulation of items (four infants). Fisting was primarily observed in the younger infants, and bimanual manipulation was primarily seen in the older infants. Recognizing one or more of the five distinct patterns of hand activities in infantile masturbation may help establishing the diagnosis.

Design and Preliminary Feasibility Study of a Soft Robotic Glove for Hand Function Assistance in Stroke Survivors

PubMed Central

Yap, Hong Kai; Lim, Jeong Hoon; Nasrallah, Fatima; Yeow, Chen-Hua

2017-01-01

Various robotic exoskeletons have been proposed for hand function assistance during activities of daily living (ADL) of stroke survivors. However, traditional exoskeletons involve the use of complex rigid systems that impede the natural movement of joints, and thus reduce the wearability and cause discomfort to the user. The objective of this paper is to design and evaluate a soft robotic glove that is able to provide hand function assistance using fabric-reinforced soft pneumatic actuators. These actuators are made of silicone rubber which has an elastic modulus similar to human tissues. Thus, they are intrinsically soft and compliant. Upon air pressurization, they are able to support finger range of motion (ROM) and generate the desired actuation of the finger joints. In this work, the soft actuators were characterized in terms of their blocked tip force, normal and frictional grip force outputs. Combining the soft actuators and flexible textile materials, a soft robotic glove was developed for grasping assistance during ADL for stroke survivors. The glove was evaluated on five healthy participants for its assisted ROM and grip strength. Pilot test was performed in two stroke survivors to evaluate the efficacy of the glove in assisting functional grasping activities. Our results demonstrated that the actuators designed in this study could generate desired force output at a low air pressure. The glove had a high kinematic transparency and did not affect the active ROM of the finger joints when it was being worn by the participants. With the assistance of the glove, the participants were able to perform grasping actions with sufficient assisted ROM and grip strength, without any voluntary effort. Additionally, pilot test on stroke survivors demonstrated that the patient's grasping performance improved with the presence and assistance of the glove. Patient feedback questionnaires also showed high level of patient satisfaction and comfort. In conclusion, this paper

System design of a hand-held mobile robot for craniotomy.

PubMed

Kane, Gavin; Eggers, Georg; Boesecke, Robert; Raczkowsky, Jörg; Wörn, Heinz; Marmulla, Rüdiger; Mühling, Joachim

2009-01-01

This contribution reports the development and initial testing of a Mobile Robot System for Surgical Craniotomy, the Craniostar. A kinematic system based on a unicycle robot is analysed to provide local positioning through two spiked wheels gripping directly onto a patients skull. A control system based on a shared control system between both the Surgeon and Robot is employed in a hand-held design that is tested initially on plastic phantom and swine skulls. Results indicate that the system has substantially lower risk than present robotically assisted craniotomies, and despite being a hand-held mobile robot, the Craniostar is still capable of sub-millimetre accuracy in tracking along a trajectory and thus achieving an accurate transfer of pre-surgical plan to the operating room procedure, without the large impact of current medical robots based on modified industrial robots.

First-Year Hands-On Design Course: Implementation & Reception

ERIC Educational Resources Information Center

Butterfield, Anthony E.; Branch, Kyle; Trujillo, Edward

2015-01-01

To incorporate active and collaborative teaching methods early in our curriculum, we have developed a freshman design laboratory. The course introduces numerous core concepts and lab skills, by way of seven teaching modules, including spectrometer construction and a collaborative project with seniors. Survey data show students enjoyed and learned…

The Design of Hand Gestures for Human-Computer Interaction: Lessons from Sign Language Interpreters.

PubMed

Rempel, David; Camilleri, Matt J; Lee, David L

2015-10-01

The design and selection of 3D modeled hand gestures for human-computer interaction should follow principles of natural language combined with the need to optimize gesture contrast and recognition. The selection should also consider the discomfort and fatigue associated with distinct hand postures and motions, especially for common commands. Sign language interpreters have extensive and unique experience forming hand gestures and many suffer from hand pain while gesturing. Professional sign language interpreters (N=24) rated discomfort for hand gestures associated with 47 characters and words and 33 hand postures. Clear associations of discomfort with hand postures were identified. In a nominal logistic regression model, high discomfort was associated with gestures requiring a flexed wrist, discordant adjacent fingers, or extended fingers. These and other findings should be considered in the design of hand gestures to optimize the relationship between human cognitive and physical processes and computer gesture recognition systems for human-computer input.

The Design of Hand Gestures for Human-Computer Interaction: Lessons from Sign Language Interpreters

PubMed Central

Rempel, David; Camilleri, Matt J.; Lee, David L.

2015-01-01

The design and selection of 3D modeled hand gestures for human-computer interaction should follow principles of natural language combined with the need to optimize gesture contrast and recognition. The selection should also consider the discomfort and fatigue associated with distinct hand postures and motions, especially for common commands. Sign language interpreters have extensive and unique experience forming hand gestures and many suffer from hand pain while gesturing. Professional sign language interpreters (N=24) rated discomfort for hand gestures associated with 47 characters and words and 33 hand postures. Clear associations of discomfort with hand postures were identified. In a nominal logistic regression model, high discomfort was associated with gestures requiring a flexed wrist, discordant adjacent fingers, or extended fingers. These and other findings should be considered in the design of hand gestures to optimize the relationship between human cognitive and physical processes and computer gesture recognition systems for human-computer input. PMID:26028955

Hands on the sun: Teaching SEC science through hands on inquiery and direct observation

NASA Astrophysics Data System (ADS)

Mayo, L.; Cline, T.; Lewis, E.

2003-04-01

Hands on the Sun is a model partnership between the NASA Sun Earth Connection Education Forum (SECEF), Coronado Instruments, Space Science Institute, NOAO/Kitt Peak, Flandrau Planetarium, Astronomical League, and professional astronomers. This joint venture uses experiential learning, provocative talks, and direct observation in both formal and informal education venues to teach participants (K-12 educators, amateur astronomers, and the general public) about the sun, its impact on the Earth, and the importance of understanding the sun-Earth system. The program consists of three days of workshops and activities including tours and observing sessions on Kitt Peak including the National Solar Observatory, planetarium shows, exhibits on space weather, and professional development workshops targeted primarily at Hispanic public school science teachers which are intended to provide hands on activities demonstrating solar and SEC science that can be integrated into the classroom science curriculum. This talk will describe the many facets of this program and discuss our plans for future events.

Conceptual design of a device to measure hand swelling in a micro-gravity environment

NASA Technical Reports Server (NTRS)

Hysinger, Christopher L.

1993-01-01

In the design of pressurized suits for use by astronauts in space, proper fit is an important consideration. One particularly difficult aspect of the suit design is the design of the gloves. If the gloves of the suit do not fit properly, the grip strength of the astronaut can be decreased by as much as fifty percent. These gloves are designed using an iterative process and can cost over 1.5 million dollars. Glove design is further complicated by the way the body behaves in a micro-gravity environment. In a micro-gravity setting, fluid from the lower body tends to move into the upper body. Some of this fluid collects in the hands and causes the hands to swell. Therefore, a pair of gloves that fit well on earth may not fit well when they are used in space. The conceptual design process for a device which can measure the swelling that occurs in the hands in a micro-gravity environment is described. This process involves developing a specifications list and function structure for the device and generating solution variants for each of the sub functions. The solution variants are then filtered, with the variants that violate any of the specifications being discarded. After acceptable solution variants are obtained, they are combined to form design concepts. These design concepts are evaluated against a set of criteria and the design concepts are ranked in order of preference. Through this process, the two most plausible design concepts were an ultrasonic imaging technique and a laser mapping technique. Both of these methods create a three dimensional model of the hand, from which the amount of swelling can be determined. In order to determine which of the two solutions will actually work best, a further analysis will need to be performed.

Design and implementation of a contactless multiple hand feature acquisition system

NASA Astrophysics Data System (ADS)

Zhao, Qiushi; Bu, Wei; Wu, Xiangqian; Zhang, David

2012-06-01

In this work, an integrated contactless multiple hand feature acquisition system is designed. The system can capture palmprint, palm vein, and palm dorsal vein images simultaneously. Moreover, the images are captured in a contactless manner, that is, users need not to touch any part of the device when capturing. Palmprint is imaged under visible illumination while palm vein and palm dorsal vein are imaged under near infrared (NIR) illumination. The capturing is controlled by computer and the whole process is less than 1 second, which is sufficient for online biometric systems. Based on this device, this paper also implements a contactless hand-based multimodal biometric system. Palmprint, palm vein, palm dorsal vein, finger vein, and hand geometry features are extracted from the captured images. After similarity measure, the matching scores are fused using weighted sum fusion rule. Experimental results show that although the verification accuracy of each uni-modality is not as high as that of state-of-the-art, the fusion result is superior to most of the existing hand-based biometric systems. This result indicates that the proposed device is competent in the application of contactless multimodal hand-based biometrics.

[Study on an Exoskeleton Hand Function Training Device].

PubMed

Hu, Xin; Zhang, Ying; Li, Jicai; Yi, Jinhua; Yu, Hongliu; He, Rongrong

2016-02-01

Based on the structure and motion bionic principle of the normal adult fingers, biological characteristics of human hands were analyzed, and a wearable exoskeleton hand function training device for the rehabilitation of stroke patients or patients with hand trauma was designed. This device includes the exoskeleton mechanical structure and the electromyography (EMG) control system. With adjustable mechanism, the device was capable to fit different finger lengths, and by capturing the EMG of the users' contralateral limb, the motion state of the exoskeleton hand was controlled. Then driven by the device, the user's fingers conducting adduction/abduction rehabilitation training was carried out. Finally, the mechanical properties and training effect of the exoskeleton hand were verified through mechanism simulation and the experiments on the experimental prototype of the wearable exoskeleton hand function training device.

Research and Design. Technology Learning Activity. Teacher Edition. Technology Education Series.

ERIC Educational Resources Information Center

Oklahoma State Dept. of Vocational and Technical Education, Stillwater. Curriculum and Instructional Materials Center.

This curriculum guide provides technology learning activities designed to prepare students in grades 6-10 to work in the world of the future. The 8-day course provides exploratory, hands-on learning activities and information that can enhance the education of students of all types in an integrated curriculum that provides practical applications of…

Science beyond the Classroom: Hands-On Optics and the Boys and Girls Club

NASA Astrophysics Data System (ADS)

Dokter, Erin F.; Walker, C.; Peruta, C.; Ubach, C.; Sparks, R.; Pompea, S.

2006-12-01

In Summer and Fall 2006, the Hands-On Optics program of the National Optical Astronomy Observatory (NOAO) teamed up with two local Boys and Girls Clubs in the Tucson area to conduct informal education programs for elementary and middle school aged children. Hands-On Optics (HOO) is a collaborative program funded by NSF to create and sustain a unique, national, informal science education program to excite students about science by actively engaging them in optics activities. The program was designed especially to reach underserved students. In this talk, the successes and challenges of implementing these programs will be discussed, as well as the lessons learned in the process, which may be applied to other partnerships between EPO providers and informal learning venues.

Science Engagement Through Hands-On Activities that Promote Scientific Thinking and Generate Excitement and Awareness of NASA Assets, Missions, and Science

NASA Technical Reports Server (NTRS)

Graff, P. V.; Foxworth, S.; Miller, R.; Runco, S.; Luckey, M. K.; Maudlin, E.

2018-01-01

The public with hands-on activities that infuse content related to NASA assets, missions, and science and reflect authentic scientific practices promotes understanding and generates excitement about NASA science, research, and exploration. These types of activities expose our next generation of explorers to science they may be inspired to pursue as a future STEM career and expose people of all ages to unique, exciting, and authentic aspects of NASA exploration. The activities discussed here (Blue Marble Matches, Lunar Geologist Practice, Let's Discover New Frontiers, Target Asteroid, and Meteorite Bingo) have been developed by Astromaterials Research and Exploration Science (ARES) Science Engagement Specialists in conjunction with ARES Scientists at the NASA Johnson Space Center. Activities are designed to be usable across a variety of educational environments (formal and informal) and reflect authentic scientific content and practices.

Witness to History: Using Hands-On Activities, A Guidebook for High School History Teachers.

ERIC Educational Resources Information Center

Metzler, Suzanne

This guidebook is intended to help high school students discover the connection between themselves and the people from the past by being engaged in hands-on activities. The guidebook allows students to create artifacts or recreate a process known well to people from times past. The guide is arranged to provide historical background, materials…

One-Handed Thumb Use on Smart Phones by Semi-literate and Illiterate Users in India

NASA Astrophysics Data System (ADS)

Katre, Dinesh

There is a tremendous potential for developing mobile-based productivity tools and occupation specific applications for the semi-literate and illiterate users in India. One-handed thumb use on the touchscreen of smart phone or touch phone is considered as an effective alternative than the use of stylus or index finger, to free the other hand for supporting the occupational activity. In this context, usability research and experimental tests are conducted to understand the role of fine motor control, usability of thumb as the interaction apparatus and the ergonomic needs of users. The paper also touches upon cultural, racial and anthropometric aspects, which need due consideration while designing the mobile interface. Design recommendations are evolved to enhance the effectiveness of one-handed thumb use on smart phone, especially for the benefit of semi-literate and illiterate users.

A Multigrasp Hand Prosthesis for Providing Precision and Conformal Grasps

PubMed Central

Bennett, Daniel A.; Dalley, Skyler A.; Truex, Don; Goldfarb, Michael

2015-01-01

This paper presents the design of an anthropomorphic prosthetic hand that incorporates four motor units in a unique configuration to explicitly provide both precision and conformal grasp capability. The paper describes the design of the hand prosthesis, and additionally describes the design of an embedded control system located in the palm of the hand that enables self-contained control of hand movement. Following the design description, the paper provides experimental characterizations of hand performance, including digit force capability, bandwidth of digit movement, physical properties such as size and mass, and electrical power measurements during activities of daily living. PMID:26167111

3Hs Education: Examining hands-on, heads-on and hearts-on early childhood science education

NASA Astrophysics Data System (ADS)

Zeynep Inan, Hatice; Inan, Taskin

2015-08-01

Active engagement has become the focus of many early childhood science education curricula and standards. However, active engagement usually emphasizes getting children engaged with science solely through hands-on activities. Active engagement by way of hands, heads, and hearts are kept separate and rarely discussed in terms of getting all to work together, although inquiry-based education and student interest have been accepted as important in science education. The current study is an inquiry-based research. It aims to describe and examine projects and activity stations for preschoolers in a Turkish preschool classroom bringing together the pieces of the puzzle of science education, called here 'Hands-Heads-Hearts-on Science Education'. The study, conducted from a qualitative-interpretivist paradigm, reveals that activity stations and projects create a context for hands-on (active engagement), heads-on (inquiry based or mental-engagement), and hearts-on (interest based) science education. It is found that activity stations and projects, when maintained by appropriate teacher-support, create a playful context in which children can be actively and happily engaged in science-related inquiry.

Assessment of electrosurgical hand controls integrated into a laparoscopic grasper.

PubMed

Brown-Clerk, Bernadette; Rousek, Justin B; Lowndes, Bethany R; Eikhout, Sandra M; Balogh, Bradley J; Hallbeck, M Susan

2011-12-01

The aim of this study was to quantitatively and qualitatively determine the optimal ergonomic placement of novel electrosurgical hand controls integrated into a standard laparoscopic grasper to optimize functionality. This device will allow laparoscopic surgeons to hand-operate standard electrosurgical equipment, eliminating the use of electrosurgical foot pedals, which are prone to activation errors and cause uncomfortable body positions for the physician. Three hand control designs were evaluated by 26 participants during the performance of four basic inanimate laparoscopic electrosurgical tasks. Task completion time, actuation force, forearm electromyography (EMG) and user preference were evaluated for each hand control design. Task speed was controlled using a metronome to minimize subject variability, and resulted in no significant completion time differences between task types (P > 0.05). Hand control design 1 (CD 1) resulted in the ability to generate significantly greater actuation force for three of the four tasks (P < 0.05) with minimal forearm muscle activation. Additionally, CD 1 was rated significantly better for comfort and ease-of-use compared to the other two hand control designs (P < 0.05). As a result, CD 1 was determined to be an advantageous ergonomic design for the novel electrosurgical hand controls.

Development of hand rehabilitation system for paralysis patient - universal design using wire-driven mechanism.

PubMed

Yamaura, Hiroshi; Matsushita, Kojiro; Kato, Ryu; Yokoi, Hiroshi

2009-01-01

We have developed a hand rehabilitation system for patients suffering from paralysis or contracture. It consists of two components: a hand rehabilitation machine, which moves human finger joints with motors, and a data glove, which provides control of the movement of finger joints attached to the rehabilitation machine. The machine is based on the arm structure type of hand rehabilitation machine; a motor indirectly moves a finger joint via a closed four-link mechanism. We employ a wire-driven mechanism and develop a compact design that can control all three joints (i.e., PIP, DIP and MP ) of a finger and that offers a wider range of joint motion than conventional systems. Furthermore, we demonstrate the hand rehabilitation process, finger joints of the left hand attached to the machine are controlled by the finger joints of the right hand wearing the data glove.

Agricultural Farm-Related Injuries in Bangladesh and Convenient Design of Working Hand Tools.

PubMed

Parvez, M S; Shahriar, M M

2018-01-01

Injuries during cultivation of land are the significant causes of recession for an agricultural country like Bangladesh. Thousands of tools are used in agricultural farm having much probability of getting injury at their workplaces. For the injury prevention, proper hand tool designs need to be recommended with ergonomic evaluations. This paper represents the main causes of agricultural injuries among the Bangladeshi farmers. Effective interventions had been discussed in this paper to reduce the rate of injury. This study was carried out in the Panchagarh district of Bangladesh. Data on 434 agricultural injuries were collected and recorded. About 67% injuries of all incidents were due to hand tools, and the remaining 33% were due to machinery or other sources. Though most of the injuries were not serious, about 22% injuries were greater than or equal to AIS 2 (Abbreviated Injury Scale). The practical implication of this study is to design ergonomically fit agricultural hand tools for Bangladeshi farmers in order to avoid their injuries.

Elementary Anatomy: Activities Designed to Teach Preschool Children about the Human Body

ERIC Educational Resources Information Center

Raven, Sara

2016-01-01

Studies show that children may not be able to conceptualize some of the topics associated with anatomy, including internal organs and involuntary muscles, because the concepts are too abstract and are not easily visualized. Thus, this article presents activities that incorporate a variety of models and hands-on activities designed to provide…

Effect of task-oriented activities on hand functions, cognitive functions and self-expression of elderly patients with dementia.

PubMed

Son, Bo-Young; Bang, Yo-Soon; Hwang, Min-Ji; Oh, Eun-Ju

2017-08-01

[Purpose] This study investigates the effects of task-oriented activities on hand function, cognitive function, and self-expression of the elderly with dementia, and then identify the influencing factors on self-expression in sub-factors of dependent variables. [Subjects and Methods] Forty elderly persons were divided into two groups: intervention group (n=20) and control group (n=20). The interventions were applied to the subjects 3 times a week, 50 minutes per each time, for a total of five weeks. We measured the jamar hand dynamometer test for grip strength, the jamar hydraulic pinch gauge test for prehension test, nine-hole pegboard test for coordination test, and Loewenstein Occupational Therapy Cognitive Assessment-Geriatric Population for cognitive function, and self-expression rating scale for self-expression test. [Results] The task-oriented activities promoted hand function, cognitive function (visual perception, spatial perception, visuomotor organization, attention & concentration) and self-expression of the elderly with early dementia, and the factors influencing the self-expression were cognitive function (visual perception) and hand function (coordination). The study showed that the task-oriented program enabled self-expression by improving hand function and cognitive function. [Conclusion] This study suggested that there should be provided the task-oriented program for prevention and treatment of the elderly with early dementia in the clinical settings and it was considered that results have a value as basic data that can be verified relationship of hand function, cognitive function, and self-expression.

Effect of task-oriented activities on hand functions, cognitive functions and self-expression of elderly patients with dementia

PubMed Central

Son, Bo-Young; Bang, Yo-Soon; Hwang, Min-Ji; Oh, Eun-Ju

2017-01-01

[Purpose] This study investigates the effects of task-oriented activities on hand function, cognitive function, and self-expression of the elderly with dementia, and then identify the influencing factors on self-expression in sub-factors of dependent variables. [Subjects and Methods] Forty elderly persons were divided into two groups: intervention group (n=20) and control group (n=20). The interventions were applied to the subjects 3 times a week, 50 minutes per each time, for a total of five weeks. We measured the jamar hand dynamometer test for grip strength, the jamar hydraulic pinch gauge test for prehension test, nine-hole pegboard test for coordination test, and Loewenstein Occupational Therapy Cognitive Assessment-Geriatric Population for cognitive function, and self-expression rating scale for self-expression test. [Results] The task-oriented activities promoted hand function, cognitive function (visual perception, spatial perception, visuomotor organization, attention & concentration) and self-expression of the elderly with early dementia, and the factors influencing the self-expression were cognitive function (visual perception) and hand function (coordination). The study showed that the task-oriented program enabled self-expression by improving hand function and cognitive function. [Conclusion] This study suggested that there should be provided the task-oriented program for prevention and treatment of the elderly with early dementia in the clinical settings and it was considered that results have a value as basic data that can be verified relationship of hand function, cognitive function, and self-expression. PMID:28878462

Square Wheels and Other Easy-To-Build Hands-On Science Activities. An Exploratorium Science Snackbook.

ERIC Educational Resources Information Center

Rathjen, Don; Doherty, Paul

This book, part of The Exploratorium science "snackbook" series, explains science with a hands-on approach. Activities include: (1) "3-D Shadow"; (2) "Bits and Bytes"; (3) "Circuit Workbench"; (4) "Diamagnetic Repulsion"; (5) "Film Can Racer"; (6) "Fractal Patterns"; (7) "Hoop Nightmares"; (8) "Hydraulic Arm"; (9) "Hyperbolic Slot"; (10) "Light…

Multisensory Integration in the Virtual Hand Illusion with Active Movement

PubMed Central

Satoh, Satoru; Hachimura, Kozaburo

2016-01-01

Improving the sense of immersion is one of the core issues in virtual reality. Perceptual illusions of ownership can be perceived over a virtual body in a multisensory virtual reality environment. Rubber Hand and Virtual Hand Illusions showed that body ownership can be manipulated by applying suitable visual and tactile stimulation. In this study, we investigate the effects of multisensory integration in the Virtual Hand Illusion with active movement. A virtual xylophone playing system which can interactively provide synchronous visual, tactile, and auditory stimulation was constructed. We conducted two experiments regarding different movement conditions and different sensory stimulations. Our results demonstrate that multisensory integration with free active movement can improve the sense of immersion in virtual reality. PMID:27847822

Comparison of Muscle Activation during Dominant Hand Wrist Flexion when Writing.

PubMed

Park, Soohee

2013-12-01

[Purpose] This study investigated the difference in muscle activation of the dominant upper extremity in right-handed and left-handed persons during writing. [Subjects] There were 36 subjects (16 left- handers/ 20 right- handers), and the study was conducted from 03/01/2012 to 30/3/2012. [Methods] Six electrodes were attached to the FCU (flexor carpi ulnaris), FCR (flexor carpi radialis), ECU (extensor carpi ulnaris), ECR (extensor carpi radialis), and both UT (upper trapezius) muscles. [Results] FCU muscle activation was 16.77±9.12% in left-handers and 10.29±4.13% (%MVIC) in right-handers. FCR muscle activation was 19.09±9.43% in left-handers and 10.64±5.03% in right-handers. In addition, the UT muscle activation on the writing hand side was 11.91±5.79% in left-handers and 1.66±1.19% in right-handers. [Conclusion] As a result of this study, it was discovered that left-handers used more wrist flexion in performance of the writing task with the dominant upper extremity than right-handers, and that the left-handers activated the wrist and shoulder muscles more than the right-handers. These results indicate a potential danger of musculoskeletal disease in left-hander.

Chemistry Science Investigation: Dognapping Workshop, an Outreach Program Designed to Introduce Students to Science through a Hands-On Mystery

ERIC Educational Resources Information Center

Boyle, Timothy J.; Sears, Jeremiah M.; Hernandez-Sanchez, Bernadette A.; Casillas, Maddison R.; Nguyen, Thao H.

2017-01-01

The Chemistry Science Investigation: Dognapping Workshop was designed to (i) target and inspire fourth grade students to view themselves as "Junior Scientists" before their career decisions are solidified; (ii) enable hands-on experience in fundamental scientific concepts; (iii) increase public interaction with science, technology,…

Design Of A Low Cost Anthropomorphic Robot Hand For Industrial Applications

NASA Astrophysics Data System (ADS)

Allen, P.; Raleigh, B.

2009-11-01

Autonomous grasping systems using anthropomorphic robotic end effectors have many applications, and the potential of such devices has inspired researchers to develop many types of grasping systems over the past 30 years. Their research has yielded significant advances in end effector dexterity and functionality. However, due to the cost and complexity associated with such devices, their role has been largely confined to that of being research tools in laboratories. Industry, by contrast, has largely opted for simple, single task, devices. This paper presents a novel low cost anthropomorphic robotic end effector, and in particular the design characteristics that make it more applicable to industrial application. The design brief was (i) to be broadly similar to the human hand in terms of size and performance (ii) be low cost (less than €5000 for the system) and (iii) to provide sufficient performance to allow use in industrial applications. Consisting of three fingers and an opposing thumb, the robotic hand developed has a total of 12 automated degrees of freedom. Another 4 degrees of freedom can be set manually. The specific design of the fingers and thumb, together with the drive arrangement utilizing synchronous belts, yields a simplified kinematics solution for the control of movement. The modular nature of the design is extended also to the palm, which can be easily modified to produce different overall work envelopes for the hand. The drive system and grasping strategies are also detailed.

Development and pilot testing of HEXORR: Hand EXOskeleton Rehabilitation Robot

PubMed Central

2010-01-01

Background Following acute therapeutic interventions, the majority of stroke survivors are left with a poorly functioning hemiparetic hand. Rehabilitation robotics has shown promise in providing patients with intensive therapy leading to functional gains. Because of the hand's crucial role in performing activities of daily living, attention to hand therapy has recently increased. Methods This paper introduces a newly developed Hand Exoskeleton Rehabilitation Robot (HEXORR). This device has been designed to provide full range of motion (ROM) for all of the hand's digits. The thumb actuator allows for variable thumb plane of motion to incorporate different degrees of extension/flexion and abduction/adduction. Compensation algorithms have been developed to improve the exoskeleton's backdrivability by counteracting gravity, stiction and kinetic friction. We have also designed a force assistance mode that provides extension assistance based on each individual's needs. A pilot study was conducted on 9 unimpaired and 5 chronic stroke subjects to investigate the device's ability to allow physiologically accurate hand movements throughout the full ROM. The study also tested the efficacy of the force assistance mode with the goal of increasing stroke subjects' active ROM while still requiring active extension torque on the part of the subject. Results For 12 of the hand digits'15 joints in neurologically normal subjects, there were no significant ROM differences (P > 0.05) between active movements performed inside and outside of HEXORR. Interjoint coordination was examined in the 1st and 3rd digits, and no differences were found between inside and outside of the device (P > 0.05). Stroke subjects were capable of performing free hand movements inside of the exoskeleton and the force assistance mode was successful in increasing active ROM by 43 ± 5% (P < 0.001) and 24 ± 6% (P = 0.041) for the fingers and thumb, respectively. Conclusions Our pilot study shows that this device

Hands-on physics displays for undergraduates

NASA Astrophysics Data System (ADS)

Akerlof, Carl W.

2014-07-01

Initiated by Frank Oppenheimer in 1969, the Exploratorium in San Francisco has been the model for hands-on science museums throughout the world. The key idea has been to bring people with all levels of scientific background in contact with interesting and attractive exhibits that require the active participation of the visitor. Unfortunately, many science museums are now forced to cater primarily to very young audiences, often 8 years old or less, with predictable constraints on the intellectual depth of their exhibits. To counter this trend, the author has constructed several hands-on displays for the University of Michigan Physics Department that demonstrate: (1) magnetic levitation of pyrolytic graphite, (2) the varied magnetic induction effects in aluminum, copper and air, (3) chaotic motion of a double pendulum, (4) conservation of energy and momentum in a steel ball magnetic accelerator, (5) the diffraction pattern of red and green laser pointer beams created by CDs and DVDs, (6) a magnetic analog of the refraction of light at a dielectric boundary and (7) optical rotation of light in an aqueous fructose solution. Each of these exhibits can be constructed for something like $1000 or less and are robust enough to withstand unsupervised public use. The dynamic behavior of these exhibits will be shown in accompanying video sequences. The following story has a history that goes back quite a few years. In the late 70's, I was spending time at the Stanford Linear Accelerator Center accompanied by my family that included our two grade school children. Needless to say, we much enjoyed weekend excursions to all sorts of interesting sites in the Bay Area, especially the Exploratorium, an unusual science museum created by Frank Oppenheimer that opened in 1969. The notion that exhibits would be designed specifically for "hands-on" interactions was at that time quite revolutionary. This idea captivated a number of people everywhere including a friend in Ann Arbor, Cynthia

Alignment of Hands-on STEM Engagement Activities with Positive STEM Dispositions in Secondary School Students

NASA Astrophysics Data System (ADS)

Christensen, Rhonda; Knezek, Gerald; Tyler-Wood, Tandra

2015-12-01

This study examines positive dispositions reported by middle school and high school students participating in programs that feature STEM-related activities. Middle school students participating in school-to-home hands-on energy monitoring activities are compared to middle school and high school students in a different project taking part in activities such as an after-school robotics program. Both groups are compared and contrasted with a third group of high school students admitted at the eleventh grade to an academy of mathematics and science. All students were assessed using the same science, technology, engineering and mathematics (STEM) dispositions instrument. Findings indicate that the after-school group whose participants self-selected STEM engagement activities, and the self-selected academy of mathematics and science group, each had highly positive STEM dispositions comparable to those of STEM professionals, while a subset of the middle school whole-classroom energy monitoring group that reported high interest in STEM as a career, also possessed highly positive STEM dispositions comparable to the STEM Professionals group. The authors conclude that several different kinds of hands-on STEM engagement activities are likely to foster or maintain positive STEM dispositions at the middle school and high school levels, and that these highly positive levels of dispositions can be viewed as a target toward which projects seeking to interest mainstream secondary students in STEM majors in college and STEM careers, can hope to aspire. Gender findings regarding STEM dispositions are also reported for these groups.

Science Action Labs Part 3: Puzzlers. An Innovative Collection of Hands-On Science Activities and Labs.

ERIC Educational Resources Information Center

Shevick, Ed

This book contains hands-on science laboratory activities for grades 4 through 9 that use discrepant events to challenge students. All of the "puzzlers" are based upon science principles and include directions for building gadgets that explain the "puzzlers." Topics covered include: volume conservation, magnetic phenomena,…

Hand grips strength effect on motor function in human brain using fMRI: a pilot study

NASA Astrophysics Data System (ADS)

Ismail, S. S.; Mohamad, M.; Syazarina, S. O.; Nafisah, W. Y.

2014-11-01

Several methods of motor tasks for fMRI scanning have been evolving from simple to more complex tasks. Motor tasks on upper extremity were applied in order to excite the increscent of motor activation on contralesional and ipsilateral hemispheres in brain. The main objective of this study is to study the different conditions for motor tasks on upper extremity that affected the brain activation. Ten healthy right handed with normal vision (3 male and 7 female, age range=20-30 years, mean=24.6 years, SD=2.21) participated in this study. Prior to the scanning, participants were trained on hand grip tasks using rubber ball and pressure gauge tool outside the scanner. During fMRI session, a block design with 30-s task blocks and alternating 30-s rest periods was employed while participants viewed a computer screen via a back projection-mirror system and instructed to follow the instruction by gripping their hand with normal and strong grips using a rubber ball. Statistical Parametric mapping (SPM8) software was used to determine the brain activation. Both tasks activated the primary motor (M1), supplementary motor area (SMA), dorsal and ventral of premotor cortex area (PMA) in left hemisphere while in right hemisphere the area of primary motor (M1) somatosensory was activated. However, the comparison between both tasks revealed that the strong hand grip showed the higher activation at M1, PMA and SMA on left hemisphere and also the area of SMA on right hemisphere. Both conditions of motor tasks could provide insights the functional organization on human brain.

[Design of hand-held heart rate variability acquisition and analysis system].

PubMed

Li, Kaiyuan; Wang, Buqing; Wang, Weidong

2012-07-01

A design of handheld heart rate variability acquisition and analysis system is proposed. The system collects and stores the patient's ECG every five minutes through both hands touching on the electrodes, and then -uploads data to a PC through USB port. The system uses software written in LabVIEW to analyze heart rate variability parameters, The parameters calculated function is programmed and generated to components in Matlab.

Hands-On Optics: An Informal Education Program for Exploring Light and Color

NASA Astrophysics Data System (ADS)

Pompea, S. M.; Walker, C. E.; Peruta, C. C.; Kinder, B. A.; Aceituno, J. C.; Pena, M. A.

2005-05-01

Hands-On Optics (HOO) is a collaborative four-year program to create and sustain a unique, national, informal science education program to excite students about science by actively engaging them in optics activities. It will reach underrepresented middle school students in after-school programs and at hands-on science centers nationwide. Project partners with NOAO are SPIE-The International Society for Optical Engineering, the Optical Society of America (OSA), and the Mathematics, Engineering, Science Achievement Program (MESA) of California. This program builds on the 2001 National Science Foundation planning grant (number ESI-0136024), Optics Education - A Blueprint for the 21st Century, undertaken to address the disconnect between the ubiquity of optics in everyday life and the noticeable absence of optics education in K-12 curricula and in informal science education. NOAO - with expertise in teaching optics, developing optics kits, and in science-educator partnerships is designing the HOO instructional materials by adapting well-tested formal education activities on light, color, and optical technology for the informal setting. These hands-on, high-interest, standards-connected activities and materials serve as the basis for 6, three-hour-long optics activity modules that will be used in informal education programs at 23 HOO host sites. NOAO also will train the educators, parents, and optics professionals who will work in teams to lead the HOO activities. A key component of the project will be the optics professionals from the two optical societies who currently are engaged in outreach activities and programs. Optics professionals will serve as resource agents teamed with science center and MESA educators, a model very successfully used by the Astronomical Society of the Pacific's Project ASTRO. The six modules and associated challenges and contests address reflection from one or many mirrors, image formation, colors and polarization, ultraviolet and infrared

Development of Pupils' Transfer Skills by Means of Hands On Activities with Artisan Materials in Natural Sciences Classes

ERIC Educational Resources Information Center

Ciascai, Liliana; Chicinas, Luminita

2008-01-01

Hands on activities with artisan materials used in order to realize different practical devices helpful in learning process are one of the most frequently used activity in science classes. Usually, the main strength of these activities are: a deeper learning, an increased motivation of pupils for actively learning and development of practical…

Replicating Human Hand Synergies Onto Robotic Hands: A Review on Software and Hardware Strategies.

PubMed

Salvietti, Gionata

2018-01-01

This review reports the principal solutions proposed in the literature to reduce the complexity of the control and of the design of robotic hands taking inspiration from the organization of the human brain. Several studies in neuroscience concerning the sensorimotor organization of the human hand proved that, despite the complexity of the hand, a few parameters can describe most of the variance in the patterns of configurations and movements. In other words, humans exploit a reduced set of parameters, known in the literature as synergies, to control their hands. In robotics, this dimensionality reduction can be achieved by coupling some of the degrees of freedom (DoFs) of the robotic hand, that results in a reduction of the needed inputs. Such coupling can be obtained at the software level, exploiting mapping algorithm to reproduce human hand organization, and at the hardware level, through either rigid or compliant physical couplings between the joints of the robotic hand. This paper reviews the main solutions proposed for both the approaches.

Small Wonders. Hands-On Science Activities for Young Children.

ERIC Educational Resources Information Center

Perdue, Peggy K.

Children are natural scientists and are constantly questioning and challenging the world around them. This book is designed to help preschool and primary teachers see the science in common things. It is a book of manipulative activities that are designed to nurture a child's natural curiosity as well as integrate science with other areas.…

Digital hand atlas for web-based bone age assessment: system design and implementation

NASA Astrophysics Data System (ADS)

Cao, Fei; Huang, H. K.; Pietka, Ewa; Gilsanz, Vicente

2000-04-01

A frequently used assessment method of skeletal age is atlas matching by a radiological examination of a hand image against a small set of Greulich-Pyle patterns of normal standards. The method however can lead to significant deviation in age assessment, due to a variety of observers with different levels of training. The Greulich-Pyle atlas based on middle upper class white populations in the 1950s, is also not fully applicable for children of today, especially regarding the standard development in other racial groups. In this paper, we present our system design and initial implementation of a digital hand atlas and computer-aided diagnostic (CAD) system for Web-based bone age assessment. The digital atlas will remove the disadvantages of the currently out-of-date one and allow the bone age assessment to be computerized and done conveniently via Web. The system consists of a hand atlas database, a CAD module and a Java-based Web user interface. The atlas database is based on a large set of clinically normal hand images of diverse ethnic groups. The Java-based Web user interface allows users to interact with the hand image database form browsers. Users can use a Web browser to push a clinical hand image to the CAD server for a bone age assessment. Quantitative features on the examined image, which reflect the skeletal maturity, is then extracted and compared with patterns from the atlas database to assess the bone age.

A data mining technique for discovering distinct patterns of hand signs: implications in user training and computer interface design.

PubMed

Ye, Nong; Li, Xiangyang; Farley, Toni

2003-01-15

Hand signs are considered as one of the important ways to enter information into computers for certain tasks. Computers receive sensor data of hand signs for recognition. When using hand signs as computer inputs, we need to (1) train computer users in the sign language so that their hand signs can be easily recognized by computers, and (2) design the computer interface to avoid the use of confusing signs for improving user input performance and user satisfaction. For user training and computer interface design, it is important to have a knowledge of which signs can be easily recognized by computers and which signs are not distinguishable by computers. This paper presents a data mining technique to discover distinct patterns of hand signs from sensor data. Based on these patterns, we derive a group of indistinguishable signs by computers. Such information can in turn assist in user training and computer interface design.

Mirrors in the PDB: left-handed alpha-turns guide design with D-amino acids.

PubMed

Annavarapu, Srinivas; Nanda, Vikas

2009-09-22

Incorporating variable amino acid stereochemistry in molecular design has the potential to improve existing protein stability and create new topologies inaccessible to homochiral molecules. The Protein Data Bank has been a reliable, rich source of information on molecular interactions and their role in protein stability and structure. D-amino acids rarely occur naturally, making it difficult to infer general rules for how they would be tolerated in proteins through an analysis of existing protein structures. However, protein elements containing short left-handed turns and helices turn out to contain useful information. Molecular mechanisms used in proteins to stabilize left-handed elements by L-amino acids are structurally enantiomeric to potential synthetic strategies for stabilizing right-handed elements with D-amino acids. Propensities for amino acids to occur in contiguous alpha(L) helices correlate with published thermodynamic scales for incorporation of D-amino acids into alpha(R) helices. Two backbone rules for terminating a left-handed helix are found: an alpha(R) conformation is disfavored at the amino terminus, and a beta(R) conformation is disfavored at the carboxy terminus. Helix capping sidechain-backbone interactions are found which are unique to alpha(L) helices including an elevated propensity for L-Asn, and L-Thr at the amino terminus and L-Gln, L-Thr and L-Ser at the carboxy terminus. By examining left-handed alpha-turns containing L-amino acids, new interaction motifs for incorporating D-amino acids into right-handed alpha-helices are identified. These will provide a basis for de novo design of novel heterochiral protein folds.

Mirrors in the PDB: left-handed α-turns guide design with D-amino acids

PubMed Central

Annavarapu, Srinivas; Nanda, Vikas

2009-01-01

Background Incorporating variable amino acid stereochemistry in molecular design has the potential to improve existing protein stability and create new topologies inaccessible to homochiral molecules. The Protein Data Bank has been a reliable, rich source of information on molecular interactions and their role in protein stability and structure. D-amino acids rarely occur naturally, making it difficult to infer general rules for how they would be tolerated in proteins through an analysis of existing protein structures. However, protein elements containing short left-handed turns and helices turn out to contain useful information. Molecular mechanisms used in proteins to stabilize left-handed elements by L-amino acids are structurally enantiomeric to potential synthetic strategies for stabilizing right-handed elements with D-amino acids. Results Propensities for amino acids to occur in contiguous αL helices correlate with published thermodynamic scales for incorporation of D-amino acids into αR helices. Two backbone rules for terminating a left-handed helix are found: an αR conformation is disfavored at the amino terminus, and a βR conformation is disfavored at the carboxy terminus. Helix capping sidechain-backbone interactions are found which are unique to αL helices including an elevated propensity for L-Asn, and L-Thr at the amino terminus and L-Gln, L-Thr and L-Ser at the carboxy terminus. Conclusion By examining left-handed α-turns containing L-amino acids, new interaction motifs for incorporating D-amino acids into right-handed α-helices are identified. These will provide a basis for de novo design of novel heterochiral protein folds. PMID:19772623

CONTRIBUTIONS OF CHILDREN'S ACTIVITIES TO PESTICIDE HAND LOADINGS FOLLOWING RESIDENTIAL PESTICIDE APPLICATION

EPA Science Inventory

The role of children's activities in leading to pesticide exposure was evaluated by comparing pesticide loadings on the hands of children with the activities of the same children observed over a 4 hour period. Ten children ranging in age from 24-55 months were videotaped on the s...

An effective 3-fingered augmenting exoskeleton for the human hand.

PubMed

Gearhart, C J; Varone, B; Stella, M H; BuSha, B F

2016-08-01

Every year, thousands of Americans suffer from pathological and traumatic events that result in loss of dexterity and strength of the hand. Although many supportive devices have been designed to restore functional hand movement, most are very complex and expensive. The goal of this project was to design and implement a cost-effective, electrically powered exoskeleton for the human hand that could improve grasping strength. A 3-D printed thermoplastic exoskeleton that allowed independent and enhanced movement of the index, middle and ring fingers was constructed. In addition, a 3-D printed structure was designed to house three linear actuators, an Arduino-based control system, and a power supply. A single force sensing resistor was located on the lower inner-surface of the index fingertip which was used to proportionally activate the three motors, one motor per finger, as a function of finger force applied to the sensor. The device was tested on 4 normal human subjects. Results showed that the activation of the motor control system significantly reduced the muscle effort needed to maintain a sub-maximal grasp effort.

Rain Forest: The Latest Information and Hands-on Activities To Explore Animals, Plants, and Geography. Grades 2-5.

ERIC Educational Resources Information Center

Bernard, Robin

This book contains information and activities to help make the study of rainforests an exciting exploration for teachers and students. Students explore the animals, plants, and geography of the rainforest by completing hands-on activities from various disciplines. This book contains five units: (1) "Living Layers"; (2) "Animals, Animals, Animals";…

3"H"s Education: Examining Hands-On, Heads-On and Hearts-On Early Childhood Science Education

ERIC Educational Resources Information Center

Inan, Hatice Zeynep; Inan, Taskin

2015-01-01

Active engagement has become the focus of many early childhood science education curricula and standards. However, active engagement usually emphasizes getting children engaged with science solely through hands-on activities. Active engagement by way of hands, heads, and hearts are kept separate and rarely discussed in terms of getting all to work…

Preschoolers' Acquisition of Scientific Vocabulary through Repeated Read-Aloud Events, Retellings, and Hands-on Science Activities

ERIC Educational Resources Information Center

Leung, Cynthia B.

2008-01-01

This study explored 3- and 4-year-old children's development of scientific vocabulary from participation in repeated interactive read-aloud events and retellings of three informational picture books about light and color, followed by hands-on science activities. Thirty-two children attending a YWCA preschool were matched by age and general…

The cortical activation pattern by a rehabilitation robotic hand: a functional NIRS study

PubMed Central

Chang, Pyung-Hun; Lee, Seung-Hee; Gu, Gwang Min; Lee, Seung-Hyun; Jin, Sang-Hyun; Yeo, Sang Seok; Seo, Jeong Pyo; Jang, Sung Ho

2014-01-01

Introduction: Clarification of the relationship between external stimuli and brain response has been an important topic in neuroscience and brain rehabilitation. In the current study, using functional near infrared spectroscopy (fNIRS), we attempted to investigate cortical activation patterns generated during execution of a rehabilitation robotic hand. Methods: Ten normal subjects were recruited for this study. Passive movements of the right fingers were performed using a rehabilitation robotic hand at a frequency of 0.5 Hz. We measured values of oxy-hemoglobin (HbO), deoxy-hemoglobin (HbR) and total-hemoglobin (HbT) in five regions of interest: the primary sensory-motor cortex (SM1), hand somatotopy of the contralateral SM1, supplementary motor area (SMA), premotor cortex (PMC), and prefrontal cortex (PFC). Results: HbO and HbT values indicated significant activation in the left SM1, left SMA, left PMC, and left PFC during execution of the rehabilitation robotic hand (uncorrected, p < 0.01). By contrast, HbR value indicated significant activation only in the hand somatotopic area of the left SM1 (uncorrected, p < 0.01). Conclusions: Our results appear to indicate that execution of the rehabilitation robotic hand could induce cortical activation. PMID:24570660

Simple Protocol for Secondary School Hands-On Activity: Electrophoresis of Pre-Stained Nucleic Acids on Agar-Agar Borate Gels

ERIC Educational Resources Information Center

Britos, Leticia; Goyenola, Guillermo; Orono, Silvia Umpierrez

2004-01-01

An extremely simple, inexpensive, and safe method is presented, which emulates nucleic acids isolation and electrophoretic analysis as performed in a research environment, in the context of a secondary school hands-on activity. The protocol is amenable to an interdisciplinary approach, taking into consideration the electrical and chemical…

Rasch Analysis of a New Hierarchical Scoring System for Evaluating Hand Function on the Motor Assessment Scale for Stroke

PubMed Central

Sabari, Joyce S.; Woodbury, Michelle; Velozo, Craig A.

2014-01-01

Objectives. (1) To develop two independent measurement scales for use as items assessing hand movements and hand activities within the Motor Assessment Scale (MAS), an existing instrument used for clinical assessment of motor performance in stroke survivors; (2) To examine the psychometric properties of these new measurement scales. Design. Scale development, followed by a multicenter observational study. Setting. Inpatient and outpatient occupational therapy programs in eight hospital and rehabilitation facilities in the United States and Canada. Participants. Patients (N = 332) receiving stroke rehabilitation following left (52%) or right (48%) cerebrovascular accident; mean age 64.2 years (sd 15); median 1 month since stroke onset. Intervention. Not applicable. Main Outcome Measures. Data were tested for unidimensionality and reliability, and behavioral criteria were ordered according to difficulty level with Rasch analysis. Results. The new scales assessing hand movements and hand activities met Rasch expectations of unidimensionality and reliability. Conclusion. Following a multistep process of test development, analysis, and refinement, we have redesigned the two scales that comprise the hand function items on the MAS. The hand movement scale contains an empirically validated 10-behavior hierarchy and the hand activities item contains an empirically validated 8-behavior hierarchy. PMID:25177513

Use of Design Patterns According to Hand Dominance in a Mobile User Interface

ERIC Educational Resources Information Center

Al-Samarraie, Hosam; Ahmad, Yusof

2016-01-01

User interface (UI) design patterns for mobile applications provide a solution to design problems and can improve the usage experience for users. However, there is a lack of research categorizing the uses of design patterns according to users' hand dominance in a learning-based mobile UI. We classified the main design patterns for mobile…

Sunscreen Use on the Dorsal Hands at the Beach

PubMed Central

Warren, Donald B.; Riahi, Ryan R.; Hobbs, Jason B.; Wagner, Richard F.

2013-01-01

Background. Since skin of the dorsal hands is a known site for the development of cutaneous squamous cell carcinoma, an epidemiologic investigation was needed to determine if beachgoers apply sunscreen to the dorsal aspect of their hands as frequently as they apply it to other skin sites. Aim. The aim of the current study was to compare the use of sunscreen on the dorsal hands to other areas of the body during subtropical late spring and summer sunlight exposure at the beach. Materials and Methods. A cross-sectional survey from a convenience sample of beachgoers was designed to evaluate respondent understanding and protective measures concerning skin cancer on the dorsal hands in an environment with high natural UVR exposure. Results. A total of 214 surveys were completed and analyzed. Less than half of subjects (105, 49%) applied sunscreen to their dorsal hands. Women applied sunscreen to the dorsal hands more than men (55% women versus 40% men, P = 0.04). Higher Fitzpatrick Skin Type respondents were less likely to protect their dorsal hands from ultraviolet radiation (P = 0.001). Conclusions. More public education focused on dorsal hand protection from ultraviolet radiation damage is necessary to reduce the risk for squamous cell carcinomas of the hands. PMID:23840956

Molecular Biology for the Environment: an EC-US hands-on Course in Environmental Biotechnology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Victor de Lorenzo; Juan Luis Ramos; Jerome Kukor

One of the central goals of this activity is to bring together young scientists (at the late Ph.D. or early postdoctoral stages of their careers) in a forum that should result in future collaborations. The course is designed to give scientists hands-on experience in modern, up-to-date biotechnological methods at the interface between molecular biology and environmental biotechnology for the analysis of microorganisms and their activities with regard to the remediation of pollutants in the environment.

Using Satellite Lightning Data as a Hands-On Activity for a Broad Audience

NASA Astrophysics Data System (ADS)

Sinclair, L.; Smith, T.; Smith, D. K.; Weigel, A. M.; Bugbee, K.; Leach, C.

2017-12-01

Satellite lightning data archived at the NASA Global Hydrology Resource Center Distributed Active Archive Center (GHRC DAAC) captures the number of lightning flashes occurring within four by four kilometer pixels around the world from January 1998 through October 2014. These data were measured by the Lightning Imaging Sensor (LIS) on the Tropical Rainfall Measuring Mission (TRMM) satellite. As an outreach effort to educate other on the use lightning measurements, the GHRC DAAC developed an interactive color-by-number poster showing accumulated lightning flashes around the world. As participants color the poster it reveals regions of maximum lightning flash counts across the Earth, including Lake Maracaibo in Catatumbo, Venezuela and a region in Congo, Africa. This hands-on activity is a bright, colorful, and inviting way to bring lightning data to a broad audience and can be used for people of many ages, including elementary-aged audiences up to adults.

The Effect of Antibacterial Formula Hand Cleaners on the Elimination of Microbes on Hands

NASA Astrophysics Data System (ADS)

Coleman, J. R.

2002-05-01

: The purpose of this project is to find out which one of the antibacterial hand cleanser (antibacterial bar soap, antibacterial liquid hand soap, and liquid hand sanitizer) is more effective in eliminating microbes. If antibacterial- formula liquid hand soap is used on soiled hands, then it will be more effective in eliminating microbes. Germs are microorganisms that cause disease and can spread from person-to-person. Bacteria are a kind of microbe, an example of which is Transient Flora that is often found on hands. Hand washing prevents germs from spreading to others. During the procedure, swabs were used to take samples before and after the soiled hands had been washed with one of the antibacterial hand cleansers. Nutrient Easygel was poured into petri dishes to harden for 1 day, and then samples were swabbed on the gel. The Petri dishes were placed in an incubator for 24 hours, and then data was recorded accordingly. The antibacterial liquid hand soap was sufficient in eliminating the majority of bacteria. The hands had 65% of the bacteria on them, and after the liquid hand soap was used only 37% of the bacteria remained.

The Healthy Heart Race: A Short-Duration, Hands-on Activity in Cardiovascular Physiology for Museums and Science Festivals

ERIC Educational Resources Information Center

Pressley, Thomas A.; Limson, Melvin; Byse, Miranda; Matyas, Marsha Lakes

2011-01-01

The "Healthy Heart Race" activity provides a hands-on demonstration of cardiovascular function suitable for lay audiences. It was field tested during the United States of America Science and Engineering Festival held in Washington, DC, in October 2010. The basic equipment for the activity consisted of lengths of plastic tubing, a hand…

Hand rehabilitation after stroke using a wearable, high DOF, spring powered exoskeleton.

PubMed

Tianyao Chen; Lum, Peter S

2016-08-01

Stroke patients often have inappropriate finger flexor activation and finger extensor weakness, which makes it difficult to open their affected hand for functional grasp. The goal was to develop a passive, lightweight, wearable device to enable improved hand function during performance of activities of daily living. The device, HandSOME II, assists with opening the patient's hand using 11 elastic actuators that apply extension torques to finger and thumb joints. Device design and initial testing are described. A novel mechanical design applies forces orthogonal to the finger segments despite the fact that all of the device DOFs are not aligned with human joint DOF. In initial testing with seven stroke subjects with impaired hand function, use of HandSOME II significantly increased maximum extension angles and range of motion in all of the index finger joints (P<;0.05). HandSOME II allows performance of all the grip patterns used in daily activities and can be used as part of home-based therapy programs.

Using a Hands-On Hydrogen Peroxide Decomposition Activity to Teach Catalysis Concepts to K-12 Students

ERIC Educational Resources Information Center

Cybulskis, Viktor J.; Ribeiro, Fabio H.; Gounder, Rajamani

2016-01-01

A versatile and transportable laboratory apparatus was developed for middle and high school (6th-12th grade) students as part of a hands-on outreach activity to estimate catalytic rates of hydrogen peroxide decomposition from oxygen evolution rates measured by using a volumetric displacement method. The apparatus was constructed with inherent…

Hands-on Activities Designed to Familiarize Users with Data from ABI on GOES-R and AHI on Himawari-8

NASA Astrophysics Data System (ADS)

Lindstrom, S. S.; Schmit, T.; Gerth, J.; Gunshor, M. M.; Mooney, M. E.; Whittaker, T. M.

2016-12-01

Recent and ongoing launches of next-generation geostationary satellites offer a challenge to familiarize National Weather Service (and other) forecasters with the new capabilities of different spectral channels sensed by the Advanced Baseline Imager (ABI) on GOES-R and the Advanced Himawari Imager (AHI) on Himawari-8. Hands on HTML5-based applets developed at the Cooperative Institute for Meteorological Satellite Studies allow for quick comparisons of reflectance in the visible (0.4 to 0.7 um) and near-infrared channels (0.86 to 2.2 um) and brightness temperatures in the infrared (3.9 to 13.3 um). The web apps to explore the different channels on ABI and AHI are at http://cimss.ssec.wisc.edu/goes/webapps/bandapp/; those that offer guidance on how to produce Red/Green/Blue composites are at http://cimss.ssec.wisc.edu/goes/webapps/satrgb/overview.html. This talk will briefly discuss highlights from both websites, and suggest ways the applications can be used to educate forecasters and the general public.

Hands-on Science: Does It Matter What Students' Hands Are On?

ERIC Educational Resources Information Center

Triona, Lara M.; Klahr, David

2007-01-01

Hands-on science typically uses physical materials to give students first-hand experience in scientific methodologies, but the recent availability of virtual laboratories raises an important question about whether what students' hands are on matters to their learning. The overall findings of two articles that employed simple comparisons of…

Cultural Influences in Women-Friendly Labor-Saving Hand Tool Designs

PubMed Central

Kisaalita, William S.; Katimbo, Abia; Sempiira, Edison J.; Mugisa, Dana J.

2016-01-01

Objective: The aim of this study was to highlight the importance of culture in sustainable, labor-saving solutions design for women in low-resource settings. Background: One of the reasons behind the gender asset gap among Sub-Saharan African women is the higher labor burden these women face, making it difficult for them to produce for the home and markets. Hand tools are the simplest form and therefore the best first step to address this problem. But designing women-friendly (sustainable) hand tools calls for better understanding of the low-resource settings where these women reside. Method: A milk churner was redesigned using a human-centered (participatory) approach with groups of women from two dominant ethnolinguistic groups of Bantu and Nilotic of Uganda, and its usability was tested. Results: The churner reduced labor up to eightfold and has potential to expand the range of uses to include children and husbands due to its simplicity. Also, the churner significantly reduced undesirable health effects, like pain in knee joints. Based on the experience with the churner, a six-item “survival guide” is proposed to complement human-centered design guiding principles for facilitating the generation of solutions in low-resource settings. Conclusion: By paying great attention to culture in relation to human factors, a labor-reducing churner has been successfully introduced among Ugandan women. The ultimate goal is to make the churner available to female smallholder dairy-farming households throughout Sub-Saharan Africa. Applications: This study provides a survival guide for generating solutions to problems from low-resource settings. PMID:26764373

Comparison of positive pressure gloves on hand function in adults with burns.

PubMed

O'Brien, Kimberly A; Weinstock-Zlotnick, Gwen; Hunter, Hope; Yurt, Roger W

2006-01-01

The purpose of this study was to analyze the impact of a standard, custom-made pressure glove vs The NewYork-Presbyterian Dexterity Glove (NYPDG) with silon application on the palmer surface on functional hand use of burn survivors. A standard, custom-made pressure glove and NYPDG were given to 18 participants in a randomized order. Subjects wore each glove for 7 to 10 days during all activities of daily living (ADL). Variables such as hand function, difficulty of fine and gross motor ADL, and participant glove preference were assessed with each glove condition. Data collection of the second glove took place 7 to 10 days later incorporating a quasiexperimental, repeated measure design. A crossover design was used to analyze the data. The NYPDG demonstrated significantly better results in all of the four outcome categories measured: time to complete the Jebsen, the Jebsen Likert scale, fine motor ADL, and gross motor ADL. This study demonstrated that functional tasks took less time to complete and were more easily performed when using the NYPDG.

Hands-on optics: an informal science education initiative

NASA Astrophysics Data System (ADS)

Johnson, Anthony M.; Pompea, Stephen M.; Arthurs, Eugene G.; Walker, Constance E.; Sparks, Robert T.

2007-09-01

The project is collaboration between two scientific societies, the Optical Society of America (OSA) and SPIE - The International Society for Optical Engineering and the National Optical Astronomy Observatory (NOAO). The program is designed to bring science education enrichment to thousands of underrepresented middle school students in more than ten states, including female and minority students, who typically have not been the beneficiaries of science and engineering resources and investments. HOO provides each teacher with up to six activity modules, each containing enough materials for up to 30 students to participate in 6-8 hours of hands-on optics-related activities. Sample activities, developed by education specialists at NOAO, include building kaleidoscopes and telescopes, communicating with a beam of light, and a hit-the-target laser beam challenge. Teachers engage in two days of training and, where possible, are partnered with a local optics professional (drawn from the local rosters of SPIE and OSA members) who volunteers to spend time with the teacher and students as they explore the module activities. Through these activities, students gain experience and understanding of optics principles, as well as learning the basics of inquiry, critical thinking, and problem solving skills involving optics, and how optics interfaces with other disciplines. While the modules were designed for use in informal after- school or weekend sessions, the number of venues has expanded to large and small science centers, Boys and Girls Clubs, Girl Scouts, summer camps, family workshops, and use in the classroom.

Hand specific representations in language comprehension.

PubMed

Moody-Triantis, Claire; Humphreys, Gina F; Gennari, Silvia P

2014-01-01

Theories of embodied cognition argue that language comprehension involves sensory-motor re-enactments of the actions described. However, the degree of specificity of these re-enactments as well as the relationship between action and language remains a matter of debate. Here we investigate these issues by examining how hand-specific information (left or right hand) is recruited in language comprehension and action execution. An fMRI study tested self-reported right-handed participants in two separate tasks that were designed to be as similar as possible to increase sensitivity of the comparison across task: an action execution go/no-go task where participants performed right or left hand actions, and a language task where participants read sentences describing the same left or right handed actions as in the execution task. We found that language-induced activity did not match the hand-specific patterns of activity found for action execution in primary somatosensory and motor cortex, but it overlapped with pre-motor and parietal regions associated with action planning. Within these pre-motor regions, both right hand actions and sentences elicited stronger activity than left hand actions and sentences-a dominant hand effect. Importantly, both dorsal and ventral sections of the left pre-central gyrus were recruited by both tasks, suggesting different action features being recruited. These results suggest that (a) language comprehension elicits motor representations that are hand-specific and akin to multimodal action plans, rather than full action re-enactments; and (b) language comprehension and action execution share schematic hand-specific representations that are richer for the dominant hand, and thus linked to previous motor experience.

Differences in muscle activity during hand-dexterity tasks between women with arthritis and a healthy reference group.

PubMed

Brorsson, Sofia; Nilsdotter, Anna; Thorstensson, Carina; Bremander, Ann

2014-05-15

Impaired hand function is common in patients with arthritis and it affects performance of daily activities; thus, hand exercises are recommended. There is little information on the extent to which the disease affects activation of the flexor and extensor muscles during these hand-dexterity tasks. The purpose of this study was to compare muscle activation during such tasks in subjects with arthritis and in a healthy reference group. Muscle activation was measured in m. extensor digitorium communis (EDC) and in m. flexor carpi radialis (FCR) with surface electromyography (EMG) in women with rheumatoid arthritis (RA, n = 20), hand osteoarthritis (HOA, n = 16) and in a healthy reference group (n = 20) during the performance of four daily activity tasks and four hand exercises. Maximal voluntary isometric contraction (MVIC) was measured to enable intermuscular comparisons, and muscle activation is presented as %MVIC. The arthritis group used a higher %MVIC than the reference group in both FCR and EDC when cutting with a pair of scissors, pulling up a zipper and-for the EDC-also when writing with a pen and using a key (p < 0.02). The exercise "rolling dough with flat hands" required the lowest %MVIC and may be less effective in improving muscle strength. Women with arthritis tend to use higher levels of muscle activation in daily tasks than healthy women, and wrist extensors and flexors appear to be equally affected. It is important that hand training programs reflect real-life situations and focus also on extensor strength.

Recognizing the Operating Hand and the Hand-Changing Process for User Interface Adjustment on Smartphones.

PubMed

Guo, Hansong; Huang, He; Huang, Liusheng; Sun, Yu-E

2016-08-20

As the size of smartphone touchscreens has become larger and larger in recent years, operability with a single hand is getting worse, especially for female users. We envision that user experience can be significantly improved if smartphones are able to recognize the current operating hand, detect the hand-changing process and then adjust the user interfaces subsequently. In this paper, we proposed, implemented and evaluated two novel systems. The first one leverages the user-generated touchscreen traces to recognize the current operating hand, and the second one utilizes the accelerometer and gyroscope data of all kinds of activities in the user's daily life to detect the hand-changing process. These two systems are based on two supervised classifiers constructed from a series of refined touchscreen trace, accelerometer and gyroscope features. As opposed to existing solutions that all require users to select the current operating hand or confirm the hand-changing process manually, our systems follow much more convenient and practical methods and allow users to change the operating hand frequently without any harm to the user experience. We conduct extensive experiments on Samsung Galaxy S4 smartphones, and the evaluation results demonstrate that our proposed systems can recognize the current operating hand and detect the hand-changing process with 94.1% and 93.9% precision and 94.1% and 93.7% True Positive Rates (TPR) respectively, when deciding with a single touchscreen trace or accelerometer-gyroscope data segment, and the False Positive Rates (FPR) are as low as 2.6% and 0.7% accordingly. These two systems can either work completely independently and achieve pretty high accuracies or work jointly to further improve the recognition accuracy.

Hand anthropometry of Indian women.

PubMed

Nag, Anjali; Nag, P K; Desai, Hina

2003-06-01

Data on the physical dimension of the hand of Indian women are scanty. This information is necessary to ascertain human-machine compatibility in the design of manual systems for the bare and gloved hand, such as design and sizing of hand tools, controls, knobs and other applications in different kinds of precision and power grips. The present study was undertaken to generate hand anthropometric data of 95 women, working in informal industries (beedi, agarbatti and garment making). Fifty one hand measurements of the right hand (lengths, breadths, circumferences, depths, spreads and clearances of hand and fingers) were taken, using anthropometric sliding and spreading calipers, measuring tape and handgrip strength dynamometer. The data were statistically analyzed to determine the normality of data and the percentile values of different hand dimensions, and simple and multiple regression analysis were done to determine better predictors of hand length and grip strength. The hand breadths, circumferences and depths were approximately normally distributed, with some deviation in case of the finger lengths. Hand length was significantly correlated with the fist, wrist and finger circumferences. The fist and wrist circumferences, in combination, were better predictors of hand length. The hand lengths, breadths and depths, including finger joints of the Indian women studied were smaller than those of American, British and West Indian women. The hand circumferences of the Indian women were also smaller than the American women. Grip strengths of Indian women (20.36 +/- 3.24 kg) were less than those of American, British and West Indian women. Grip strength was found to be statistically significant with hand dimensions, such as hand height perpendicular to wrist crease (digit 5), proximal interphalangeal joint breadth (digit 3) and hand spread across wedge 1. The women who are forced to frequently use cutters, strippers and other tools, which are not optimally designed to

Association between blood cholinesterase activity, organophosphate pesticide residues on hands, and health effects among chili farmers in Ubon Ratchathani Province, northeastern Thailand

PubMed

Nganchamung, Thitirat; Robson, Mark G; Siriwong, Wattasit

Use of pesticides has been documented to lead to several adverse health effects. Farmers are likely to be exposed to pesticides through dermal exposure as a result of mixing, loading, and spraying. Organophosphate pesticides (OPs) are widely used in most of the agricultural areas throughout Thailand. OPs are cholinesterase inhibitors and blood cholinesterase activity is used as a biomarker of OP effects. This study aims to determine the association between blood cholinesterase activity and organophosphate pesticide residues on chili farmer’s hands and their adverse health effects. Ninety chili farmers directly involved with pesticide applications (e.g. mixing, loading, spraying) were recruited and were interviewed face to face. Both enzymes, erythrocyte acetylcholinesterase (AChE) and plasma cholinesterase (PChE), were tested with the EQM Test-mate Cholinesterase Test System (Model 400). Hand wipe samples were used for collecting residues on both hands and OP residues for chlorpyrifos and profenofos were quantified using gas chromatography equipped with a flame photometric detector (GC-FPD). The average activity (±SD) of AChE and PChE was 2.73 (±0.88) and 1.58 (±0.56) U/mL, respectively. About 80.0% of the participants had detectable OP residues on hands. The median residues of chlorpyrifos and profenofos were found to be 0.02 and 0.03 mg/kg/two hands, respectively. Half of participants reported having some acute health symptoms within 48 hours after applying pesticides. When adjusted for gender, number of years working in chili farming, and frequency of pesticide use, AChE activity (Adjusted OR = 0.03, 95%CI: 0.01-0.13) and detected OP residues on hands (Adjusted OR = 0.15, 95%CI: 0.02-0.95) were significantly associated with having health effects, but no significant association was found in PChE activity (Adjusted OR = 2.09, 95%CI: 0.63-6.99). This study suggests that regular monitoring for blood cholinesterase and effective interventions to reduce pesticide

Design and implementation of a project-based active/cooperative engineering design course for freshmen

NASA Astrophysics Data System (ADS)

Abdulaal, R. M.; Al-Bahi, A. M.; Soliman, A. Y.; Iskanderani, F. I.

2011-08-01

A project-based active/cooperative design course is planned, implemented, assessed and evaluated to achieve several desired engineering outcomes. The course allows freshman-level students to gain professional hands-on engineering design experience through an opportunity to practise teamwork, quality principles, communication skills, life-long learning, realistic constraints and awareness of current domestic and global challenges. Throughout successive design reports and in-class assignments, the students are required by the end of the semester to communicate, clearly and concisely, the details of their design both orally and in writing through a functional artefact/prototype, a design notebook, an A0 project poster and a final oral presentation. In addition to these direct assessment tools, several indirect measures are used to ensure triangulation. Assignments are based on customer expectations using a detailed checklist. This paper shows the direct and indirect assessment tools that indicated a high level of achievement of course learning outcomes and a high level of student satisfaction.

Hand disorders, hand function, and activities of daily living in elderly men with type 2 diabetes.

PubMed

Cederlund, Ragnhild I; Thomsen, Niels; Thrainsdottir, Soley; Eriksson, Karl-Fredrik; Sundkvist, Göran; Dahlin, Lars B

2009-01-01

This study aimed to examine hand disorders, symptoms, overall hand function, activities of daily living (ADLs), and life satisfaction in elderly men with type 2 diabetes mellitus (DM), impaired glucose tolerance (IGT), and normal glucose tolerance (NGT). Subjects were interviewed and evaluated with a battery of clinical and laboratory tests, including hand assessment, and a questionnaire. HbA1c differed between groups (highest in DM, especially in long-term DM). Limited joint motion (LJM), for example, prayer sign and Dupuytren's contracture, was most common in individuals with DM, followed by individuals with IGT, as compared to those with NGT. Vibrotactile sense was impaired symmetrically in the index and little fingers in DM. However, there were no differences for sensibility, dexterity, grip strength, and cold intolerance between groups. Individuals with long-term (>15 years) DM were more affected regarding sensibility and ADL than individuals with short-term DM, who had more sleep disturbances. ADL difficulties were less among IGT subjects. Vibrotactile sense showed correlations with Semmes-Weinstein monofilament test and static two-point discrimination. Dupuytren's contracture and impaired vibrotactile sense in finger pulps occurred in patients with DM but not in those with IGT, although LJM occurred in both IGT and DM patients. A longer duration of DM was associated with more severe neuropathy and ADL difficulties. Life satisfaction was high, and hand disorders did not have a significant impact on ADL.

Hands-On Optics science camps and clubs

NASA Astrophysics Data System (ADS)

Walker, Constance E.; Sparks, Robert T.; Pompea, Stephen M.

2007-06-01

Hands-On Optics (HOO) is a National Science Foundation funded program to bring optics education to traditionally underserved middle school students. We have developed six modules that teach students optics concepts through hands-on, inquiry-based activities. The modules have been used extensively in after-school and non-school settings such as in the Boys and Girls Clubs in South Tucson, Arizona and the Boys and Girls Club in Sells, Arizona on the Tohono O'odham reservation. We will describe these programs and the lessons learned in these settings. These modules also form the basis for a week-long optics camp that provides students with approximately 40 hours of instruction time in optics. We will provide an outline of the activities and concepts covered in the camp. These camps provide an ideal way to encourage interest in optics before career choices are developed.

Knowledge Retention for Computer Simulations: A study comparing virtual and hands-on laboratories

NASA Astrophysics Data System (ADS)

Croom, John R., III

The use of virtual laboratories has the potential to change physics education. These low-cost, interactive computer activities interest students, allow for easy setup, and give educators a way to teach laboratory based online classes. This study investigated whether virtual laboratories could replace traditional hands-on laboratories and whether students could retain the same long-term knowledge in virtual laboratories as compared to hands-on laboratories. This study is a quantitative quasi-experiment that used a multiple posttest design to determine if students using virtual laboratories would retain the same knowledge as students who performed hands-on laboratories after 9 weeks. The study was composed of 336 students from 14 school districts. Students had their performances on the laboratories and their retention of the laboratories compared to a series of factors that might have affected their retention using a pretest and two posttests, which were compared using a t test. The results showed no significant difference in short-term learning between the hands-on laboratory groups and virtual laboratory groups. There was, however, a significant difference (p = .005) between the groups in long-term retention; students in the hands-on laboratory groups retained more information than those in the virtual laboratory groups. These results suggest that long-term learning is enhanced when a laboratory contains a hands-on component. Finally, the results showed that both groups of students felt their particular laboratory style was superior to the alternative method. The findings of this study can be used to improve the integration of virtual laboratories into science curriculum.

The Influence of Toy Design Activities on Middle School Students' Understanding of the Engineering Design Processes

ERIC Educational Resources Information Center

Zhou, Ninger; Pereira, Nielsen L.; Tarun, Thomas George; Alperovich, Jeffrey; Booth, Joran; Chandrasegaran, Senthil; Tew, Jeffrey David; Kulkarni, Devadatta M.; Ramani, Karthik

2017-01-01

The societal demand for inspiring and engaging science, technology, engineering, and mathematics (STEM) students and preparing our workforce for the emerging creative economy has necessitated developing students' self-efficacy and understanding of engineering design processes from as early as elementary school levels. Hands-on engineering design…

Body ownership and agency: task-dependent effects of the virtual hand illusion on proprioceptive drift.

PubMed

Shibuya, Satoshi; Unenaka, Satoshi; Ohki, Yukari

2017-01-01

Body ownership and agency are fundamental to self-consciousness. These bodily experiences have been intensively investigated using the rubber hand illusion, wherein participants perceive a fake hand as their own. After presentation of the illusion, the position of the participant's hand then shifts toward the location of the fake hand (proprioceptive drift). However, it remains controversial whether proprioceptive drift is able to provide an objective measurement of body ownership, and whether agency also affects drift. Using the virtual hand illusion (VHI), the current study examined the effects of body ownership and agency on proprioceptive drift, with three different visuo-motor tasks. Twenty healthy adults (29.6 ± 9.2 years old) completed VH manipulations using their right hand under a 2 × 2 factorial design (active vs. passive manipulation, and congruent vs. incongruent virtual hand). Prior to and after VH manipulation, three different tasks were performed to assess proprioceptive drift, in which participants were unable to see their real hands. The effects of the VHI on proprioceptive drift were task-dependent. When participants were required to judge the position of their right hand using a ruler, or by reaching toward a visual target, both body ownership and agency modulated proprioceptive drift. Comparatively, when participants aligned both hands, drift was influenced by ownership but not agency. These results suggest that body ownership and agency might differentially modulate various body representations in the brain.

Shifting Gears. Hands-on Activities for Learning Workplace Skills and English as a Second Language. A Teacher's Handbook.

ERIC Educational Resources Information Center

World Education, Inc., New York, NY.

This curriculum handbook uses a hands-on approach to teaching basic skills and language for the U.S. workplace to students who are not familiar with many common tools and procedures. Although designed for Southeast Asian refugees, the curriculum can be adapted for use with other groups, including older adults or young people. The handbook consists…

Differential activation in the primary motor cortex during individual digit movement in focal hand dystonia vs. healthy.

PubMed

Kimberley, Teresa J; Pickett, Kristen A

2012-01-01

The pathophysiology of focal hand dystonia (FHD) is not clearly understood. Previous studies have reported increased and decreased cortical activity associated with motor tasks. The aim of this study was to investigate blood oxygen level dependent (BOLD) signal changes in functional magnetic resonance imaging within the hand area of primary motor cortex during cued movement of individual digits. Eight healthy individuals and five individuals with right hand FHD participated. Beta weight contrasts were examined within the hand area of the motor cortex. In both groups, BOLD signal changes in the hemisphere contralateral to the moving hand were greater in the left hemisphere than the right. Between groups, no difference was found during control of the left hand, but a significant difference was seen during right hand movement; specifically, individuals with dystonia showed increased contralateral and decreased ipsilateral cortical response associated with the affected hand as compared to healthy individuals. This suggests a similar, albeit exaggerated pattern of activation in individuals with FHD on the affected side. These results suggest different levels of ipsilateral and contralateral activation between healthy and dystonic individuals but also show a relative difference between symptomatic and asymptomatic control within the patient population.

The healthy heart race: a short-duration, hands-on activity in cardiovascular physiology for museums and science festivals.

PubMed

Pressley, Thomas A; Limson, Melvin; Byse, Miranda; Matyas, Marsha Lakes

2011-09-01

The "Healthy Heart Race" activity provides a hands-on demonstration of cardiovascular function suitable for lay audiences. It was field tested during the United States of America Science and Engineering Festival held in Washington, DC, in October 2010. The basic equipment for the activity consisted of lengths of plastic tubing, a hand pump, collection containers, clamps, and simulated blood prepared by tinting water with red food coloring. Student participants were first asked to experience the effort required to pump through an unaltered tube. A presenter then applied a strong clamp that pinched each tube downstream from the pump, and students were asked to pump against the increased resistance. The students' observations were then used as the basis for discussions of atherosclerosis and coronary heart disease with the presenters. Distribution of informative postcards during the 2 days of the festival indicated that at least 2,500 students completed the Healthy Heart Race activity. Our experiences to date suggest that the Healthy Heart Race activity can be accomplished effectively in the high-volume, high-distraction environment of a science fair or museum.

Quantum Mechanics for Everyone: Hands-On Activities Integrated with Technology.

ERIC Educational Resources Information Center

Zollman, Dean A.; Rebello, N. Sanjay; Hogg, Kirsten

2002-01-01

Explains a hands-on approach to teaching quantum mechanics that challenges the belief shared by many physics instructors that quantum mechanics is a very abstract subject that cannot be understood until students have learned much of the classical physics. (Contains 23 references.) (Author/YDS)

Not-So-Messy Hands-On Science.

ERIC Educational Resources Information Center

Bryan, Denise; Denty, Amy

2002-01-01

Presents four elementary hands-on science activities that highlight animal adaptation (how birds' beaks are adapted to suit their habitats), the water cycle (how nature cleans rainwater that seeps into the ground), aquatic ecosystems (changes over time in an aquatic habitat), and animal habitats (all living beings' need for food, water, shelter,…

Recognizing the Operating Hand and the Hand-Changing Process for User Interface Adjustment on Smartphones †

PubMed Central

Guo, Hansong; Huang, He; Huang, Liusheng; Sun, Yu-E

2016-01-01

As the size of smartphone touchscreens has become larger and larger in recent years, operability with a single hand is getting worse, especially for female users. We envision that user experience can be significantly improved if smartphones are able to recognize the current operating hand, detect the hand-changing process and then adjust the user interfaces subsequently. In this paper, we proposed, implemented and evaluated two novel systems. The first one leverages the user-generated touchscreen traces to recognize the current operating hand, and the second one utilizes the accelerometer and gyroscope data of all kinds of activities in the user’s daily life to detect the hand-changing process. These two systems are based on two supervised classifiers constructed from a series of refined touchscreen trace, accelerometer and gyroscope features. As opposed to existing solutions that all require users to select the current operating hand or confirm the hand-changing process manually, our systems follow much more convenient and practical methods and allow users to change the operating hand frequently without any harm to the user experience. We conduct extensive experiments on Samsung Galaxy S4 smartphones, and the evaluation results demonstrate that our proposed systems can recognize the current operating hand and detect the hand-changing process with 94.1% and 93.9% precision and 94.1% and 93.7% True Positive Rates (TPR) respectively, when deciding with a single touchscreen trace or accelerometer-gyroscope data segment, and the False Positive Rates (FPR) are as low as 2.6% and 0.7% accordingly. These two systems can either work completely independently and achieve pretty high accuracies or work jointly to further improve the recognition accuracy. PMID:27556461

A four-dimensional virtual hand brain-machine interface using active dimension selection

NASA Astrophysics Data System (ADS)

Rouse, Adam G.

2016-06-01

Objective. Brain-machine interfaces (BMI) traditionally rely on a fixed, linear transformation from neural signals to an output state-space. In this study, the assumption that a BMI must control a fixed, orthogonal basis set was challenged and a novel active dimension selection (ADS) decoder was explored. Approach. ADS utilizes a two stage decoder by using neural signals to both (i) select an active dimension being controlled and (ii) control the velocity along the selected dimension. ADS decoding was tested in a monkey using 16 single units from premotor and primary motor cortex to successfully control a virtual hand avatar to move to eight different postures. Main results. Following training with the ADS decoder to control 2, 3, and then 4 dimensions, each emulating a grasp shape of the hand, performance reached 93% correct with a bit rate of 2.4 bits s-1 for eight targets. Selection of eight targets using ADS control was more efficient, as measured by bit rate, than either full four-dimensional control or computer assisted one-dimensional control. Significance. ADS decoding allows a user to quickly and efficiently select different hand postures. This novel decoding scheme represents a potential method to reduce the complexity of high-dimension BMI control of the hand.

A four-dimensional virtual hand brain-machine interface using active dimension selection

PubMed Central

Rouse, Adam G.

2018-01-01

Objective Brain-machine interfaces (BMI) traditionally rely on a fixed, linear transformation from neural signals to an output state-space. In this study, the assumption that a BMI must control a fixed, orthogonal basis set was challenged and a novel active dimension selection (ADS) decoder was explored. Approach ADS utilizes a two stage decoder by using neural signals to both i) select an active dimension being controlled and ii) control the velocity along the selected dimension. ADS decoding was tested in a monkey using 16 single units from premotor and primary motor cortex to successfully control a virtual hand avatar to move to eight different postures. Main Results Following training with the ADS decoder to control 2, 3, and then 4 dimensions, each emulating a grasp shape of the hand, performance reached 93% correct with a bit rate of 2.4 bits/s for eight targets. Selection of eight targets using ADS control was more efficient, as measured by bit rate, than either full four-dimensional control or computer assisted one-dimensional control. Significance ADS decoding allows a user to quickly and efficiently select different hand postures. This novel decoding scheme represents a potential method to reduce the complexity of high-dimension BMI control of the hand. PMID:27171896

A four-dimensional virtual hand brain-machine interface using active dimension selection.

PubMed

Rouse, Adam G

2016-06-01

Brain-machine interfaces (BMI) traditionally rely on a fixed, linear transformation from neural signals to an output state-space. In this study, the assumption that a BMI must control a fixed, orthogonal basis set was challenged and a novel active dimension selection (ADS) decoder was explored. ADS utilizes a two stage decoder by using neural signals to both (i) select an active dimension being controlled and (ii) control the velocity along the selected dimension. ADS decoding was tested in a monkey using 16 single units from premotor and primary motor cortex to successfully control a virtual hand avatar to move to eight different postures. Following training with the ADS decoder to control 2, 3, and then 4 dimensions, each emulating a grasp shape of the hand, performance reached 93% correct with a bit rate of 2.4 bits s(-1) for eight targets. Selection of eight targets using ADS control was more efficient, as measured by bit rate, than either full four-dimensional control or computer assisted one-dimensional control. ADS decoding allows a user to quickly and efficiently select different hand postures. This novel decoding scheme represents a potential method to reduce the complexity of high-dimension BMI control of the hand.

Moisturizing alcohol hand gels for surgical hand preparation.

PubMed

Jones, R D; Jampani, H; Mulberry, G; Rizer, R L

2000-03-01

With the use of novel formulary technology, unique moisturizing hand gels have been developed that offer significant advantages in perioperative and other health care settings. These advantages include the time-saving capabilities of a waterless formulation, the persistence and effectiveness of a surgical scrub, and the moisturization and protective properties of a lotion. Extensive laboratory and clinical studies, involving in vivo antimicrobial activity against resident and transient flora, skin moisturization on normal and dry skin, and compatibility with latex gloves, have supported these advantages. Nondrying alcohol hand gels can be used for antiseptic hand washing, hand scrubs between procedures (i.e., reentry scrubs), brushless surgical scrubs, moisturizers, and glove-donning aids.

Design of a force reflecting hand controller for space telemanipulation studies

NASA Technical Reports Server (NTRS)

Paines, J. D. B.

1987-01-01

The potential importance of space telemanipulator systems is reviewed, along with past studies of master-slave manipulation using a generalized force reflecting master arm. Problems concerning their dynamic interaction with the human operator have been revealed in the use of these systems, with marked differences between 1-g and simulated weightless conditions. A study is outlined to investigate the optimization of the man machine dynamics of master-slave manipulation, and a set of specifications is determined for the apparatus necessary to perform this investigation. This apparatus is a one degree of freedom force reflecting hand controller with closed loop servo control which enables it to simulate arbitrary dynamic properties to high bandwidth. Design of the complete system and its performance is discussed. Finally, the experimental adjustment of the hand controller dynamics for smooth manual control performance with good operator force perception is described, resulting in low inertia, viscously damped hand controller dynamics.

Student Content Knowledge Increases after Participation in a Hands-on Biotechnology Intervention

ERIC Educational Resources Information Center

Bigler, Amber M.; Hanegan, Nikki L.

2011-01-01

Implementing biotechnology education through hands-on teaching methods should be considered by secondary biology teachers. This study is an experimental research design to examine increased student content knowledge in biotechnology after a hands-on biotechnology intervention. The teachers from both school groups participated in, Project Crawfish,…

Hands-On Whole Science. Pass the Beetles, Please.

ERIC Educational Resources Information Center

Kepler, Lynne

1992-01-01

Several hands-on whole science activities help elementary students learn about animals' diets and how they affect other animals. One activity involves identifying animals as carnivores, herbivores, or omnivores. Another has students construct food chains. Two across-the-curriculum ideas involve naming carnivores and preparing imaginary menus for…

Science Fun: Hands-On Science with Dr. Zed.

ERIC Educational Resources Information Center

Penrose, Gordon

This book presents 65 simple, safe, and intriguing hands-on science activities. In doing these simple experiments, children can make a variety of discoveries that will surprise them. It includes many activities from discovering how people see color and what makes people's hair stand on end, to creating a tornado in a jar or a propeller-driven boat…

The Use of Molecular Modeling as "Pseudoexperimental" Data for Teaching VSEPR as a Hands-On General Chemistry Activity

ERIC Educational Resources Information Center

Martin, Christopher B.; Vandehoef, Crissie; Cook, Allison

2015-01-01

A hands-on activity appropriate for first-semester general chemistry students is presented that combines traditional VSEPR methods of predicting molecular geometries with introductory use of molecular modeling. Students analyze a series of previously calculated output files consisting of several molecules each in various geometries. Each structure…

Effect of hand sanitizer location on hand hygiene compliance.

PubMed

Cure, Laila; Van Enk, Richard

2015-09-01

Hand hygiene is the most important intervention to prevent infection in hospitals. Health care workers should clean their hands at least before and after contact with patients. Hand sanitizer dispensers are important to support hand hygiene because they can be made available throughout hospital units. The aim of this study was to determine whether the usability of sanitizer dispensers correlates with compliance of staff in using the sanitizer in a hospital. This study took place in a Midwest, 404-bed, private, nonprofit community hospital with 15 inpatient care units in addition to several ambulatory units. The usability and standardization of sanitizers in 12 participating inpatient units were evaluated. The hospital measured compliance of staff with hand hygiene as part of their quality improvement program. Data from 2010-2012 were analyzed to measure the relationship between compliance and usability using mixed-effects logistic regression models. The total usability score (P = .0046), visibility (P = .003), and accessibility of the sanitizer on entrance to the patient room (P = .00055) were statistically associated with higher observed compliance rates. Standardization alone showed no significant impact on observed compliance (P = .37). Hand hygiene compliance can be influenced by visibility and accessibility of dispensers. The sanitizer location should be part of multifaceted interventions to improve hand hygiene. Copyright © 2015 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

"Optics 4 every1", the hands-on optics outreach program of the Universidad Autonoma de Nuevo Leon

NASA Astrophysics Data System (ADS)

Viera-González, Perla M.; Sánchez-Guerrero, Guillermo E.

2016-09-01

The Fisica Pato2 (Physics 4 every1) outreach group started as a need of hands-on activities and active Science demonstrations in the education for kids, teenagers and basic education teachers in Nuevo Leffon maintaining a main objective of spread the word about the importance of Optics and Photonics; for accomplish this objective, since November 2013 several outreach events are organized every year by the group. The program Optics 4 every1 is supported by the Facultad de Ciencias Fisico Matematicas of the Universidad Autonoma de Nuevo Leon and the International Society for Optics and Photonics and consist in quick hands-on activities and Optics demonstrations designed for teach basic optical phenomena related with light and its application in everyday life. During 2015, with the purpose of celebrate the International Year of Light 2015, the outreach group was involved in 13 different events and reached more than 8,000 people. The present work explains the activities done and the outcome obtained with this program.

Perceived ability to perform daily hand activities after stroke and associated factors: a cross-sectional study.

PubMed

Ekstrand, Elisabeth; Rylander, Lars; Lexell, Jan; Brogårdh, Christina

2016-11-02

Despite that disability of the upper extremity is common after stroke, there is limited knowledge how it influences self-perceived ability to perform daily hand activities. The aim of this study was to describe which daily hand activities that persons with mild to moderate impairments of the upper extremity after stroke perceive difficult to perform and to evaluate how several potential factors are associated with the self-perceived performance. Seventy-five persons (72 % male) with mild to moderate impairments of the upper extremity after stroke (4 to 116 months) participated. Self-perceived ability to perform daily hand activities was rated with the ABILHAND Questionnaire. The perceived ability to perform daily hand activities and the potentially associated factors (age, gender, social and vocational situation, affected hand, upper extremity pain, spasticity, grip strength, somatosensation of the hand, manual dexterity, perceived participation and life satisfaction) were evaluated by linear regression models. The activities that were perceived difficult or impossible for a majority of the participants were bimanual tasks that required fine manual dexterity of the more affected hand. The factor that had the strongest association with perceived ability to perform daily hand activities was dexterity (p < 0.001), which together with perceived participation (p = 0.002) explained 48 % of the variance in the final multivariate model. Persons with mild to moderate impairments of the upper extremity after stroke perceive that bimanual activities requiring fine manual dexterity are the most difficult to perform. Dexterity and perceived participation are factors specifically important to consider in the rehabilitation of the upper extremity after stroke in order to improve the ability to use the hands in daily life.

Effects of electromyography-driven robot-aided hand training with neuromuscular electrical stimulation on hand control performance after chronic stroke.

PubMed

Rong, Wei; Tong, Kai Yu; Hu, Xiao Ling; Ho, Sze Kit

2015-03-01

An electromyography-driven robot system integrated with neuromuscular electrical stimulation (NMES) was developed to investigate its effectiveness on post-stroke rehabilitation. The performance of this system in assisting finger flexion/extension with different assistance combinations was evaluated in five stroke subjects. Then, a pilot study with 20-sessions training was conducted to evaluate the training's effectiveness. The results showed that combined assistance from the NMES-robot could improve finger movement accuracy, encourage muscle activation of the finger muscles and suppress excessive muscular activities in the elbow joint. When assistances from both NMES and the robot were 50% of their maximum assistances, finger-tracking performance had the best results, with the lowest root mean square error, greater range of motion, higher voluntary muscle activations of the finger joints and lower muscle co-contraction in the finger and elbow joints. Upper limb function improved after the 20-session training, indicated by the increased clinical scores of Fugl-Meyer Assessment, Action Research Arm Test and Wolf Motor Function Test. Muscle co-contraction was reduced in the finger and elbow joints reflected by the Modified Ashworth Scale. The findings demonstrated that an electromyography-driven NMES-robot used for chronic stroke improved hand function and tracking performance. Further research is warranted to validate the method on a larger scale. Implications for Rehabilitation The hand robotics and neuromuscular electrical stimulation (NMES) techniques are still separate systems in current post-stroke hand rehabilitation. This is the first study to investigate the combined effects of the NMES and robot on hand rehabilitation. The finger tracking performance was improved with the combined assistance from the EMG-driven NMES-robot hand system. The assistance from the robot could improve the finger movement accuracy and the assistance from the NMES could reduce the

Medical student hand preference, perceived dexterity, and impact of handedness on training.

PubMed

Callahan, Devon; de Virgilio, Christian; Tillou, Areti; DeUgarte, Daniel A

2016-07-01

The ubiquity of right-handed instruments and a predominance of right-handed surgical faculty present a challenge to left-handed trainees. Little is known about hand preference and its impact on specialty selection. We sought to evaluate hand preference, perceived dexterity, and impact of handedness on training among medical students. A survey was distributed to third and fourth year medical students. Hand preference was queried for various activities. A Likert scale was used to assess perceived dexterity and impact of handedness on training. Fisher's exact test was used to compare groups. Of those queried, 131 (37%) responded. Handedness was defined by writing preference: right (80%), left (18%), other (2%). Left-handed students were more likely to perceive themselves to be ambidextrous (50% versus 15%; P < 0.001) and prefer their contralateral hand for at least one other activity (50% versus 4%; P < 0.001). Left-handed students were significantly more likely to report that handedness affected their specialty selection (33% versus 10%; P < 0.01) and training (58% versus 6%; P < 0.001). In addition, they reported that they would benefit from additional training with right-handed instruments (61% versus 31%; P < 0.01), availability of left-handed instruments (63% versus 8%; P < 0.001), and trainers who adapted to their handedness (70% versus 14%; P < 0.001). Left-handed medical students reported greater ambidexterity and adverse impact of handedness on training. These results provide a contemporary snapshot of hand preference in medical students and an argument for improving and adapting surgical training for left-handed individuals. Copyright © 2016 Elsevier Inc. All rights reserved.

Hands On, Hearts On, Minds On: Design Thinking within an Education Context

ERIC Educational Resources Information Center

Cassim, Fatima

2013-01-01

Today the changing nature of design practice and the role of design within a widening domain indicate that the survival of design as a profession may depend less on traditional design education and more on responding strategically to contemporary changes, influenced by ethical and environmental issues as well as technological advancements. As a…

Clues from hands/Part 2. Personal details about patients revealed by hand examination.

PubMed

Schilli, Karen Danielle; Stricklin, Sherea Monica; Payne, Katie Sue; Rader, Ryan Kent; Stoecker, William V

2014-01-01

This is the second part of a two-part article on personal details revealed by hand examination. Examining hands to determine daily activities was the focus of Part 1 in the July/August 2014 Missouri Medicine. Personal traits and preferences, including pets, nutrition and psychology are presented here. These articles serve as a guide for visual clues on the hands to discern a patient's daily activities and personal preference, thereby providing social information that may help establish rapport between patient and physician and may have medical significance.

A wrist tendon travel assessment of hand movements associated with industrial repetitive activities.

PubMed

Ugbolue, U Chris; Nicol, Alexander C

2012-01-01

To investigate slow and fast paced industrial activity hand repetitive movements associated with carpal tunnel syndrome where movements are evaluated based on finger and wrist tendon travel measurements. Nine healthy subjects were recruited for the study aged between 23 and 33 years. Participants mimicked an industrial repetitive task by performing the following activities: wrist flexion and extension task, palm open and close task; and pinch task. Each task was performed for a period of 5 minutes at a slow (0.33 Hz) and fast (1 Hz) pace for a duration of 3 minutes and 2 minutes respectively. Tendon displacement produced higher flexor digitorum superficialis (FDS) tendon travel when compared to the flexor digitorum profundus (FDP) tendons. The left hand mean (SD) tendon travel for the FDS tendon and FDP tendon were 11108 (5188) mm and 9244 (4328) mm while the right hand mean tendon travel (SD) for the FDS tendon and FDP tendon were 9225 (3441) mm and 7670 (2856) mm respectively. Of the three tasks mimicking an industrial repetitive activity, the wrist flexion and extension task produced the most tendon travel. The findings may be useful to researchers in classifying the level of strenuous activity in relation to tendon travel.

Introducing Chemical Reactions Concepts in K-6 through a Hands-On Food Spherification and Spaghetti-Fication Experiment

ERIC Educational Resources Information Center

Gupta, Anju; Hill, Nicole; Valenzuela, Patricia; Johnson, Eric

2017-01-01

Recruiting students in STEM majors to fill the gap in STEM workforce is a continued challenge, which can be addressed by introducing scientific principles through hand-on activities to the students at an early stage. This paper presents the design, implementation and assessment of a chemistry-related workshop for sixth grade students that were…

Two-Thumbed Robot Hand

NASA Technical Reports Server (NTRS)

Lee, Sukhan

1989-01-01

Robot hand includes thumblike members on left and right sides and fingerlike member at middle. Configuration of digits enables hand to adapt to variously shaped objects, grasp them robustly and reliably, and manipulate them. Reduces complexity of control mechanisms and provides kinesthetic perception of shapes of grasped objects. Mechanical hand with two thumbs and middle finger made from commercially available components. With specially designed dc motors and assemblies of gears, size of hand reduced considerably. Suited to handling objects in industrial tasks.

Multi-channel NIRS of the primary motor cortex to discriminate hand from foot activity

NASA Astrophysics Data System (ADS)

Koenraadt, K. L. M.; Duysens, J.; Smeenk, M.; Keijsers, N. L. W.

2012-08-01

The poor spatial resolution of near-infrared spectroscopy (NIRS) makes it difficult to distinguish two closely located cortical areas from each other. Here, a combination of multi-channel NIRS and a centre of gravity (CoG) approach (widely accepted in the field of transcranial magnetic stimulation; TMS) was used to discriminate between closely located cortical areas activated during hand and foot movements. Similarly, the possibility of separating the more anteriorly represented discrete movements from rhythmic movements was studied. Thirteen healthy right-handed subjects performed rhythmic or discrete (‘task’) hand or foot (‘extremity’) tapping. Hemodynamic responses were measured using an 8-channel NIRS setup. For oxyhemoglobin (OHb) and deoxyhemoglobin (HHb), a CoG was determined for each condition using the mean hemodynamic responses and the coordinates of the channels. Significant hemodynamic responses were found for hand and foot movements. Based on the HHb responses, the NIRS-CoG of hand movements was located 0.6 cm more laterally compared to the NIRS-CoG of foot movements. For OHb responses no difference in NIRS-CoG was found for ‘extremity’ nor for ‘task’. This is the first NIRS study showing hemodynamic responses for isolated foot movements. Furthermore, HHb responses have the potential to be used in multi-channel NIRS experiments requiring differential activation of motor cortex areas linked to either hand or foot movements.

Evaluation of a functional hand orthosis combined with electrical stimulation adjunct to arm-hand rehabilitation in subacute stroke patients with a severely to moderately affected hand function.

PubMed

Franck, Johan Anton; Smeets, Rob Johannes Elise Marie; Seelen, Henk Alexander Maria

2018-01-09

To investigate the usability and effectiveness of a functional hand orthosis, combined with electrical stimulation adjunct to therapy-as-usual, on functional use of the moderately/severely impaired hand in sub-acute stroke patients. Single case experiment (A-B-A'-design) involving eight sub-acute stroke patients. The functional hand orthosis and electrical stimulation were used for six weeks, four days/week, 45'/day. Action_Research_Arm_Test, Intrinsic_Motivation_Inventory. At group level, patients improved 19.2 points (median value) (interquartile range: [8.8, 29.5] points) on the Action_Research_Arm_Test (p = 0.001). After correcting for spontaneous recovery and/or therapy-as-usual effects Action_Research_Arm_Test scores still improved significantly (median: 17.2 points; interquartile range: [5.1, 29.2] points) (p = 0.002). At individual level, six patients had improved as to arm-hand skill performance at follow-up (p < = 0.010). In one patient, arm-hand skill performance improvement did not attain statistical significance. In another patient, no arm-hand skill performance improvement was observed. Average Intrinsic_Motivation_Inventory sub-scores were between 4.6 and 6.3 (maximum: 7), except for 'perceived pressure/tension' (3.3). Sub-acute stroke patients who display only little/modest improvement on their capacity to perform daily activities, seem to benefit from training with a dynamic arm orthosis in combination with electrical stimulation. Patients' perceived intrinsic motivation and sense of self-regulation was high. Implications for rehabilitation Arm-hand training featuring the dynamic hand orthosis in combination with electrical stimulation shows a shift from no dexterity to dexterity. As to the users' experience regarding the dynamic hand orthosis, patients perceive a high-intrinsic motivation and sense of self-regulation. Combining the orthosis with electrical stimulation creates opportunities for a nonfunctional hand towards task

Robotic hand with locking mechanism using TCP muscles for applications in prosthetic hand and humanoids

NASA Astrophysics Data System (ADS)

Saharan, Lokesh; Tadesse, Yonas

2016-04-01

This paper presents a biomimetic, lightweight, 3D printed and customizable robotic hand with locking mechanism consisting of Twisted and Coiled Polymer (TCP) muscles based on nylon precursor fibers as artificial muscles. Previously, we have presented a small-sized biomimetic hand using nylon based artificial muscles and fishing line muscles as actuators. The current study focuses on an adult-sized prosthetic hand with improved design and a position/force locking system. Energy efficiency is always a matter of concern to make compact, lightweight, durable and cost effective devices. In natural human hand, if we keep holding objects for long time, we get tired because of continuous use of energy for keeping the fingers in certain positions. Similarly, in prosthetic hands we also need to provide energy continuously to artificial muscles to hold the object for a certain period of time, which is certainly not energy efficient. In this work we, describe the design of the robotic hand and locking mechanism along with the experimental results on the performance of the locking mechanism.

Hand biometric recognition based on fused hand geometry and vascular patterns.

PubMed

Park, GiTae; Kim, Soowon

2013-02-28

A hand biometric authentication method based on measurements of the user's hand geometry and vascular pattern is proposed. To acquire the hand geometry, the thickness of the side view of the hand, the K-curvature with a hand-shaped chain code, the lengths and angles of the finger valleys, and the lengths and profiles of the fingers were used, and for the vascular pattern, the direction-based vascular-pattern extraction method was used, and thus, a new multimodal biometric approach is proposed. The proposed multimodal biometric system uses only one image to extract the feature points. This system can be configured for low-cost devices. Our multimodal biometric-approach hand-geometry (the side view of the hand and the back of hand) and vascular-pattern recognition method performs at the score level. The results of our study showed that the equal error rate of the proposed system was 0.06%.

Amplitude and timing of somatosensory cortex activity in Task Specific Focal Hand Dystonia

PubMed Central

Dolberg, Rebecca; Hinkley, Leighton B. N.; Honma, Susanne; Zhu, Zhao; Findlay, Anne M.; Byl, Nancy N.; Nagarjan, Srikantan S.

2011-01-01

Objective Task-specific focal hand dystonia (tspFHD) is a movement disorder diagnosed in individuals performing repetitive hand behaviors. The extent to which processing anomalies in primary sensory cortex extend to other regions or across the two hemispheres is presently unclear. Methods In response to low/high rate and novel tactile stimuli on the affected and unaffected hands, magnetoencephalography (MEG) was used to elaborate activity timing and amplitude in the primary somatosensory (S1) and secondary somatosensory/parietal ventral (S2/PV) cortices. MEG and clinical performance measures were collected from thirteen patients and matched controls. Results Compared to controls, subjects with tspFHD had increased response amplitude in S2/PV bilaterally in response to high rate and novel stimuli. Subjects with tspFHD also showed increased response latency (low rate, novel) of the affected digits in contralateral S1. For high rate, subjects with tspFHD showed increased response latency in ipsilateral S1 and S2/PV bilaterally. Activation differences correlated with functional sensory deficits (predicting a latency shift in S1), motor speed and muscle strength. Conclusions There are objective differences in the amplitude and timing of activity for both hands across contralateral and ipsilateral somatosensory cortex in patients with tspFHD. Significance Knowledge of cortical processing abnormalities across S1 and S2/PV in dystonia should be applied towards the development of learning based sensorimotor interventions. PMID:21802357

Amplitude and timing of somatosensory cortex activity in task-specific focal hand dystonia.

PubMed

Dolberg, Rebecca; Hinkley, Leighton B N; Honma, Susanne; Zhu, Zhao; Findlay, Anne M; Byl, Nancy N; Nagarajan, Srikantan S

2011-12-01

Task-specific focal hand dystonia (tspFHD) is a movement disorder diagnosed in individuals performing repetitive hand behaviors. The extent to which processing anomalies in primary sensory cortex extend to other regions or across the two hemispheres is presently unclear. In response to low/high rate and novel tactile stimuli on the affected and unaffected hands, magnetoencephalography (MEG) was used to elaborate activity timing and amplitude in the primary somatosensory (S1) and secondary somatosensory/parietal ventral (S2/PV) cortices. MEG and clinical performance measures were collected from 13 patients and matched controls. Compared to controls, subjects with tspFHD had increased response amplitude in S2/PV bilaterally in response to high rate and novel stimuli. Subjects with tspFHD also showed increased response latency (low rate, novel) of the affected digits in contralateral S1. For high rate, subjects with tspFHD showed increased response latency in ipsilateral S1 and S2/PV bilaterally. Activation differences correlated with functional sensory deficits (predicting a latency shift in S1), motor speed and muscle strength. There are objective differences in the amplitude and timing of activity for both hands across contralateral and ipsilateral somatosensory cortex in patients with tspFHD. Knowledge of cortical processing abnormalities across S1 and S2/PV in dystonia should be applied towards the development of learning-based sensorimotor interventions. Copyright © 2011 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Experiments and hands-on activities for geoscience observing and measuring by using low-priced instruments

NASA Astrophysics Data System (ADS)

Yang, S. S.; Lin, Y. Y.; Tang-Iunn, S. S.

2016-12-01

In this presentation, we will introduce five experiments and hands-on activities for geoscience observing and measuring by using low-priced and small-sized commercial instruments. The Black Box for Environmental Measuring (BBEM) system is based on Arduino platform, low-power consumption sensors are employed to measure meteorological and environmental parameters. Commercial GPS receiver is used to observe the influence of geomagnetic storms on GPS system. Webcam is an accessible instrument which is suitable for detecting and recording sprites, thunders, and the development of cumulonimbus. Real-time flight trackers and websites are employed to determine the altitude of cloud base. A simple VLF receiver is built by using the audio interface on computer, and the observed signals showed the variations of the D-region of the ionosphere. All these experiments and activities are practical and have been applied in classroom and science outreach in Taiwan.

Early intensive hand rehabilitation after spinal cord injury ("Hands On"): a protocol for a randomised controlled trial.

PubMed

Harvey, Lisa A; Dunlop, Sarah A; Churilov, Leonid; Hsueh, Ya-Seng Arthur; Galea, Mary P

2011-01-17

Loss of hand function is one of the most devastating consequences of spinal cord injury. Intensive hand training provided on an instrumented exercise workstation in conjunction with functional electrical stimulation may enhance neural recovery and hand function. The aim of this trial is to compare usual care with an 8-week program of intensive hand training and functional electrical stimulation. A multicentre randomised controlled trial will be undertaken. Seventy-eight participants with recent tetraplegia (C2 to T1 motor complete or incomplete) undergoing inpatient rehabilitation will be recruited from seven spinal cord injury units in Australia and New Zealand and will be randomised to a control or experimental group. Control participants will receive usual care. Experimental participants will receive usual care and an 8-week program of intensive unilateral hand training using an instrumented exercise workstation and functional electrical stimulation. Participants will drive the functional electrical stimulation of their target hands via a behind-the-ear bluetooth device, which is sensitive to tooth clicks. The bluetooth device will enable the use of various manipulanda to practice functional activities embedded within computer-based games and activities. Training will be provided for one hour, 5 days per week, during the 8-week intervention period. The primary outcome is the Action Research Arm Test. Secondary outcomes include measurements of strength, sensation, function, quality of life and cost effectiveness. All outcomes will be taken at baseline, 8 weeks, 6 months and 12 months by assessors blinded to group allocation. Recruitment commenced in December 2009. The results of this trial will determine the effectiveness of an 8-week program of intensive hand training with functional electrical stimulation. NCT01086930 (12th March 2010)ACTRN12609000695202 (12th August 2009).

Detection of pathogenic micro-organisms on children's hands and toys during play.

PubMed

Martínez-Bastidas, T; Castro-del Campo, N; Mena, K D; Castro-del Campo, N; León-Félix, J; Gerba, C P; Chaidez, C

2014-06-01

This study aimed to determine if the children's leisure activities impact the presence of pathogens on their hands and toys. To assess the microbiological hazard in playground areas, a pilot study that included 12 children was conducted. We then conducted an intervention study; children's hands and toys were washed before playing. Faecal coliforms, pathogenic bacteria and Giardia lamblia were quantified by membrane filtration, selective media and flotation techniques, respectively; rotavirus, hepatitis A and rhinovirus by RT-PCR. Pilot study results revealed faecal contamination on children's hands and toys after playing on sidewalks and in public parks. Pathogenic bacteria, hepatitis A and G. lamblia on children's hands were also found. In the intervention study, Staphylococcus aureus and Klebsiella pneumoniae were found on children's hands at concentrations up to 2·5 × 10(4) and 1 × 10(4) CFU hands(-1), respectively. E. coli and Kl. pneumoniae were detected on toys (2·4 × 10(3) and 2·7 × 10(4) CFU toy(-1), respectively). Salmonella spp, Serratia spp and G. lamblia cysts were also present on toys. Children's play activities influence microbial presence on hands and toys; the transfer seems to occur in both ways. Control strategy needs to be implemented to protect children from infectious diseases. © 2014 The Society for Applied Microbiology.

Injury Risk Assessment of Extravehicular Mobility Unit (EMU) Phase VI and Series 4000 Gloves During Extravehicular Activity (EVA) Hand Manipulation Tasks

NASA Technical Reports Server (NTRS)

Kilby, Melissa

2015-01-01

Functional Extravehicular Mobility Units (EMUs) with high precision gloves are essential for the success of Extravehicular Activity (EVA). Previous research done at NASA has shown that total strength capabilities and performance are reduced when wearing a pressurized EMU. The goal of this project was to characterize the human-space suit glove interaction and assess the risk of injury during common EVA hand manipulation tasks, including pushing, pinching and gripping objects. A custom third generation sensor garment was designed to incorporate a combination of sensors, including force sensitive resistors, strain gauge sensors, and shear force sensors. The combination of sensors was used to measure the forces acting on the finger nails, finger pads, finger tips, as well as the knuckle joints. In addition to measuring the forces, data was collected on the temperature, humidity, skin conductance, and blood perfusion of the hands. Testing compared both the Phase VI and Series 4000 glove against an ungloved condition. The ungloved test was performed wearing the sensor garment only. The project outcomes identified critical landmarks that experienced higher workloads and are more likely to suffer injuries. These critical landmarks varied as a function of space suit glove and task performed. The results showed that less forces were acting on the hands while wearing the Phase VI glove as compared to wearing the Series 4000 glove. Based on our findings, the engineering division can utilize these methods for optimizing the current space suit glove and designing next generation gloves to prevent injuries and optimize hand mobility and comfort.

Design of a 3D printed lightweight orthotic device based on twisted and coiled polymer muscle: iGrab hand orthosis

NASA Astrophysics Data System (ADS)

Saharan, Lokesh; Sharma, Ashvath; Jung de Andrade, Monica; Baughman, Ray H.; Tadesse, Yonas

2017-04-01

Partial or total upper extremity impairment affects the quality of life of a vast number of people due to stroke, neuromuscular disease, or trauma. Many researchers have presented hand orthosis to address the needs of rehabilitation or assistance on upper extremity function. Most of the devices available commercially and in literature are powered by conventional actuators such as DC motors, servomotors or pneumatic actuators. Some prototypes are developed based on shape memory alloy (SMA) and dielectric elastomers (DE). This study presents a customizable, 3D printed, a lightweight exoskeleton (iGrab) based on recently reported Twisted and Coiled Polymer (TCP) muscles, which are lightweight, provide high power to weight ratio and large stroke. We used silver coated nylon 6, 6 threads to make the TCP muscles, which can be easily actuated electrothermally. We reviewed briefly hand orthosis created with various actuation technologies and present our design of tendon-driven exoskeleton with the muscles confined in the forearm area. A single muscle is used to facilitate the motion of all three joints namely DIP (Distal interphalangeal), PIP (Proximal Interphalangeal) and MCP (Metacarpophalangeal) using passive tendons though circular rings. The grasping capabilities, along with TCP muscle properties utilized in the design such as life cycle, actuation under load and power inputs are discussed.

Comprehensive bactericidal activity of an ethanol-based hand gel in 15 seconds.

PubMed

Kampf, Günter; Hollingsworth, Angela

2008-01-22

Some studies indicate that the commonly recommended 30 s application time for the post contamination treatment of hands may not be necessary as the same effect may be achieved with some formulations in a shorter application time such as 15 s. We evaluated the bactericidal activity of an ethanol-based hand gel (Sterillium Comfort Gel) within 15 s in a time-kill-test against 11 Gram-positive, 16 Gram-negative bacteria and 11 emerging bacterial pathogens. Each strain was evaluated in quadruplicate. The hand gel (85% ethanol, w/w) was found to reduce all 11 Gram-positive and all 16 Gram-negative bacteria by more than 5 log10 steps within 15 s, not only against the ATCC test strains but also against corresponding clinical isolates. In addition, a log10 reduction > 5 was observed against all tested emerging bacterial pathogens. The ethanol-based hand gel was found to have a broad spectrum of bactericidal activity in only 15 s which includes the most common species causing nosocomial infections and the relevant emerging pathogens. Future research will hopefully help to find out if a shorter application time for the post contamination treatment of hands provides more benefits or more risks.

Hand Biometric Recognition Based on Fused Hand Geometry and Vascular Patterns

PubMed Central

Park, GiTae; Kim, Soowon

2013-01-01

A hand biometric authentication method based on measurements of the user's hand geometry and vascular pattern is proposed. To acquire the hand geometry, the thickness of the side view of the hand, the K-curvature with a hand-shaped chain code, the lengths and angles of the finger valleys, and the lengths and profiles of the fingers were used, and for the vascular pattern, the direction-based vascular-pattern extraction method was used, and thus, a new multimodal biometric approach is proposed. The proposed multimodal biometric system uses only one image to extract the feature points. This system can be configured for low-cost devices. Our multimodal biometric-approach hand-geometry (the side view of the hand and the back of hand) and vascular-pattern recognition method performs at the score level. The results of our study showed that the equal error rate of the proposed system was 0.06%. PMID:23449119

Integrated, multidisciplinary care for hand eczema: design of a randomized controlled trial and cost-effectiveness study

PubMed Central

2009-01-01

Background The individual and societal burden of hand eczema is high. Literature indicates that moderate to severe hand eczema is a disease with a poor prognosis. Many patients are hampered in their daily activities, including work. High costs are related to high medical consumption, productivity loss and sick leave. Usual care is suboptimal, due to a lack of optimal instruction and coordination of care, and communication with the general practitioner/occupational physician and people involved at the workplace. Therefore, an integrated, multidisciplinary intervention involving a dermatologist, a care manager, a specialized nurse and a clinical occupational physician was developed. This paper describes the design of a study to investigate the effectiveness and cost-effectiveness of integrated care for hand eczema by a multidisciplinary team, coordinated by a care manager, consisting of instruction on avoiding relevant contact factors, both in the occupational and in the private environment, optimal skin care and treatment, compared to usual, dermatologist-led care. Methods The study is a multicentre, randomized, controlled trial with an economic evaluation alongside. The study population consists of patients with chronic, moderate to severe hand eczema, who visit an outpatient clinic of one of the participating 5 (three university and two general) hospitals. Integrated, multidisciplinary care, coordinated by a care manager, including allergo-dermatological evaluation by a dermatologist, occupational intervention by a clinical occupational physician, and counselling by a specialized nurse on optimizing topical treatment and skin care will be compared with usual care by a dermatologist. The primary outcome measure is the cumulative difference in reduction of the clinical severity score HECSI between the groups. Secondary outcome measures are the patient's global assessment, specific quality of life with regard to the hands, generic quality of life, sick leave and

Effect of neurofeedback and electromyographic-biofeedback therapy on improving hand function in stroke patients.

PubMed

Rayegani, S M; Raeissadat, S A; Sedighipour, L; Rezazadeh, I Mohammad; Bahrami, M H; Eliaspour, D; Khosrawi, S

2014-01-01

The aim of the present study was to evaluate the effect of applying electroencephalogram (EEG) biofeedback (neurobiofeedback) or electromyographic (EMG) biofeedback to conventional occupational therapy (OT) on improving hand function in stroke patients. This study was designed as a preliminary clinical trial. Thirty patients with stroke were entered the study. Hand function was evaluated by Jebsen Hand Function Test pre and post intervention. Patients were allocated to 3 intervention cohorts: (1) OT, (2) OT plus EMG-biofeedback therapy, and (3) OT plus neurofeedback therapy. All patients received 10 sessions of conventional OT. Patients in cohorts 2 and 3 also received EMG-biofeedback and neurofeedback therapy, respectively. EMG-biofeedback therapy was performed to strengthen the abductor pollicis brevis (APB) muscle. Neurofeedback training was aimed at enhancing sensorimotor rhythm after mental motor imagery. Hand function was improved significantly in the 3 groups. The spectral power density of the sensorimotor rhythm band in the neurofeedback group increased after mental motor imagery. Maximum and mean contraction values of electrical activities of the APB muscle during voluntary contraction increased significantly after EMG-biofeedback training. Patients in the neurofeedback and EMG-biofeedback groups showed hand improvement similar to conventional OT. Further studies are suggested to assign the best protocol for neurofeedback and EMG-biofeedback therapy.

Cognitive Achievement and Motivation in Hands-on and Teacher-Centred Science Classes: Does an additional hands-on consolidation phase (concept mapping) optimise cognitive learning at work stations?

NASA Astrophysics Data System (ADS)

Gerstner, Sabine; Bogner, Franz X.

2010-05-01

Our study monitored the cognitive and motivational effects within different educational instruction schemes: On the one hand, teacher-centred versus hands-on instruction; on the other hand, hands-on instruction with and without a knowledge consolidation phase (concept mapping). All the instructions dealt with the same content. For all participants, the hands-on approach as well as the concept mapping adaptation were totally new. Our hands-on approach followed instruction based on "learning at work stations". A total of 397 high-achieving fifth graders participated in our study. We used a pre-test, post-test, retention test design both to detect students' short-term learning success and long-term learning success, and to document their decrease rates of newly acquired knowledge. Additionally, we monitored intrinsic motivation. Although the teacher-centred approach provided higher short-term learning success, hands-on instruction resulted in relatively lower decrease rates. However, after six weeks, all students reached similar levels of newly acquired knowledge. Nevertheless, concept mapping as a knowledge consolidation phase positively affected short-term increase in knowledge. Regularly placed in instruction, it might increase long-term retention rates. Scores of interest, perceived competence and perceived choice were very high in all the instructional schemes.

The Timber Wolf: Hands-On Activities for Elementary Teachers.

ERIC Educational Resources Information Center

Kaufman, Donald G.; Oh, Bobbie S.

The focus of this manual is the timber wolf and its experience in the United States. The activities are designed to enable students to gain a factual understanding of the timber wolf, question any misinformation they have learned regarding wolves, and learn to appreciate the wolf as a creature of nature rather than fear it as a creature of fairy…

A new approach of active compliance control via fuzzy logic control for multifingered robot hand

NASA Astrophysics Data System (ADS)

Jamil, M. F. A.; Jalani, J.; Ahmad, A.

2016-07-01

Safety is a vital issue in Human-Robot Interaction (HRI). In order to guarantee safety in HRI, a model reference impedance control can be a very useful approach introducing a compliant control. In particular, this paper establishes a fuzzy logic compliance control (i.e. active compliance control) to reduce impact and forces during physical interaction between humans/objects and robots. Exploiting a virtual mass-spring-damper system allows us to determine a desired compliant level by understanding the behavior of the model reference impedance control. The performance of fuzzy logic compliant control is tested in simulation for a robotic hand known as the RED Hand. The results show that the fuzzy logic is a feasible control approach, particularly to control position and to provide compliant control. In addition, the fuzzy logic control allows us to simplify the controller design process (i.e. avoid complex computation) when dealing with nonlinearities and uncertainties.

Giving speech a hand: gesture modulates activity in auditory cortex during speech perception.

PubMed

Hubbard, Amy L; Wilson, Stephen M; Callan, Daniel E; Dapretto, Mirella

2009-03-01

Viewing hand gestures during face-to-face communication affects speech perception and comprehension. Despite the visible role played by gesture in social interactions, relatively little is known about how the brain integrates hand gestures with co-occurring speech. Here we used functional magnetic resonance imaging (fMRI) and an ecologically valid paradigm to investigate how beat gesture-a fundamental type of hand gesture that marks speech prosody-might impact speech perception at the neural level. Subjects underwent fMRI while listening to spontaneously-produced speech accompanied by beat gesture, nonsense hand movement, or a still body; as additional control conditions, subjects also viewed beat gesture, nonsense hand movement, or a still body all presented without speech. Validating behavioral evidence that gesture affects speech perception, bilateral nonprimary auditory cortex showed greater activity when speech was accompanied by beat gesture than when speech was presented alone. Further, the left superior temporal gyrus/sulcus showed stronger activity when speech was accompanied by beat gesture than when speech was accompanied by nonsense hand movement. Finally, the right planum temporale was identified as a putative multisensory integration site for beat gesture and speech (i.e., here activity in response to speech accompanied by beat gesture was greater than the summed responses to speech alone and beat gesture alone), indicating that this area may be pivotally involved in synthesizing the rhythmic aspects of both speech and gesture. Taken together, these findings suggest a common neural substrate for processing speech and gesture, likely reflecting their joint communicative role in social interactions.

Giving Speech a Hand: Gesture Modulates Activity in Auditory Cortex During Speech Perception

PubMed Central

Hubbard, Amy L.; Wilson, Stephen M.; Callan, Daniel E.; Dapretto, Mirella

2008-01-01

Viewing hand gestures during face-to-face communication affects speech perception and comprehension. Despite the visible role played by gesture in social interactions, relatively little is known about how the brain integrates hand gestures with co-occurring speech. Here we used functional magnetic resonance imaging (fMRI) and an ecologically valid paradigm to investigate how beat gesture – a fundamental type of hand gesture that marks speech prosody – might impact speech perception at the neural level. Subjects underwent fMRI while listening to spontaneously-produced speech accompanied by beat gesture, nonsense hand movement, or a still body; as additional control conditions, subjects also viewed beat gesture, nonsense hand movement, or a still body all presented without speech. Validating behavioral evidence that gesture affects speech perception, bilateral nonprimary auditory cortex showed greater activity when speech was accompanied by beat gesture than when speech was presented alone. Further, the left superior temporal gyrus/sulcus showed stronger activity when speech was accompanied by beat gesture than when speech was accompanied by nonsense hand movement. Finally, the right planum temporale was identified as a putative multisensory integration site for beat gesture and speech (i.e., here activity in response to speech accompanied by beat gesture was greater than the summed responses to speech alone and beat gesture alone), indicating that this area may be pivotally involved in synthesizing the rhythmic aspects of both speech and gesture. Taken together, these findings suggest a common neural substrate for processing speech and gesture, likely reflecting their joint communicative role in social interactions. PMID:18412134

Kick Stick Hands-on Challenge: Discover Circuits with PBS's "Design Squad Nation"[TM

ERIC Educational Resources Information Center

Feinberg, Lauren

2011-01-01

This article describes the "Kick Stick" activity from Design Squad Nation, in which kids turn a wooden paint stirrer and circuit into a motorized, spinning arm--then use it to kick a Ping-Pong[R] ball across the floor. Teachers can enrich their students' exploration of circuits and emphasize the engineering design process with "Design Squad…

Both hands at work: the effect of aging on upper-limb kinematics in a multi-step activity of daily living.

PubMed

Gulde, Philipp; Hermsdörfer, Joachim

2017-05-01

The kinematic performance of basic motor tasks shows a clear decrease with advancing age. This study examined if the rules known from such tasks can be generalized to activities of daily living. We examined the end-effector kinematics of 13 young and 13 elderly participants in the multi-step activity of daily living of tea-making. Furthermore, we analyzed bimanual behavior and hand dominance in the task using different conditions of execution. The elderly sample took substantially longer to complete the activity (almost 50%) with longer trajectories compared with the young sample. Models of multiple linear regression revealed that the longer trajectories prolonged the trial duration in both groups, and while movement speed influenced the trial duration of young participants, phases of inactivity negatively affected how long the activity took the elderly subjects. No differences were found regarding bimanual performance or hand dominance. We assume that in self-paced activities of daily living, the age-dependent differences in the kinematics are more likely to be based on the higher cognitive demands of the task rather than on pure motor capability. Furthermore, it seems that not all of the rules known from basic motor tasks can be generalized to activities of daily living.

Effect of surgical hand scrub time on subsequent bacterial growth.

PubMed

Wheelock, S M; Lookinland, S

1997-06-01

In this experimental study, the researchers evaluated the effect of surgical hand scrub time on subsequent bacterial growth and assessed the effectiveness of the glove juice technique in a clinical setting. In a randomized crossover design, 25 perioperative staff members scrubbed for two or three minutes in the first trial and vice versa in the second trial, after which the wore sterile surgical gloves for one hour under clinical conditions. The researchers then sampled the subjects' nondominant hands for bacterial growth, cultured aliquots from the sampling solution, and counted microorganisms. Scrubbing for three minutes produced lower mean log bacterial counts than scrubbing for two minutes. Although the mean bacterial count differed significantly (P = .02) between the two-minute and three-minute surgical hand scrub times, it fell below 0.5 log, which is the threshold for practical and clinical significance. This finding suggests that a two-minute surgical hand scrub is clinically as effective as a three-minute surgical had scrub. The glove juice technique demonstrated sensitivity and reliability in enumerating bacteria on the hands of perioperative staff members in a clinical setting.

Hands-on optics and photonics outreach in Riga

NASA Astrophysics Data System (ADS)

Lesina, Natalija; Spigulis, Janis

2014-07-01

A long-term exposition focused on optics and photonics was created in Institute of Atomic Physics and Spectroscopy at University of Latvia in 2010. Considering unpopularity of science in Latvia and lack of broadly accessible hands-on outreach activities for school children, as well as rapid development of advanced photonic technologies, this exposition was meant to involve more students to the natural sciences and modern technologies. Exposition covers 10 topics of optics - colors, diffraction, interference, polarization, reflection, liquid crystals, gas discharge, lasers, fluorescence, infrared and ultraviolet radiation. Students' visits are organized as an exciting adventure, which differs from ordinary school lessons. The visit mainly includes own actions with hands-on exhibits, lecturer's explanations about the most difficult topics and some demonstrations shown by the lecturer. The main accent is made on hands-on experiments due to the fact that students, who had performed hands-on experiments, will be emboldened to choose their career in the field of science and technologies. The exposition now is running and is part of Riga Photonics Center. Nearly 300 students from the 8th till 12th grades visited it during academic years 2011/2012 and 2012/2013 and their generally positive feedback has been analyzed.

Structure of a designed, right-handed coiled-coil tetramer containing all biological amino acids

PubMed Central

Sales, Mark; Plecs, Joseph J.; Holton, James M.; Alber, Tom

2007-01-01

The previous design of an unprecedented family of two-, three-, and four-helical, right-handed coiled coils utilized nonbiological amino acids to efficiently pack spaces in the oligomer cores. Here we show that a stable, right-handed parallel tetrameric coiled coil, called RH4B, can be designed entirely using biological amino acids. The X-ray crystal structure of RH4B was determined to 1.1 Å resolution using a designed metal binding site to coordinate a single Yb2+ ion per 33-amino acid polypeptide chain. The resulting experimental phases were particularly accurate, and the experimental electron density map provided an especially clear, unbiased view of the molecule. The RH4B structure closely matched the design, with equivalent core rotamers and an overall root-mean-square deviation for the N-terminal repeat of the tetramer of 0.24 Å. The clarity and resolution of the electron density map, however, revealed alternate rotamers and structural differences between the three sequence repeats in the molecule. These results suggest that the RH4B structure populates an unanticipated variety of structures. PMID:17766380

Structure of a designed, right-handed coiled-coil tetramer containing all biological amino acids.

PubMed

Sales, Mark; Plecs, Joseph J; Holton, James M; Alber, Tom

2007-10-01

The previous design of an unprecedented family of two-, three-, and four-helical, right-handed coiled coils utilized nonbiological amino acids to efficiently pack spaces in the oligomer cores. Here we show that a stable, right-handed parallel tetrameric coiled coil, called RH4B, can be designed entirely using biological amino acids. The X-ray crystal structure of RH4B was determined to 1.1 Angstrom resolution using a designed metal binding site to coordinate a single Yb(2+) ion per 33-amino acid polypeptide chain. The resulting experimental phases were particularly accurate, and the experimental electron density map provided an especially clear, unbiased view of the molecule. The RH4B structure closely matched the design, with equivalent core rotamers and an overall root-mean-square deviation for the N-terminal repeat of the tetramer of 0.24 Angstrom. The clarity and resolution of the electron density map, however, revealed alternate rotamers and structural differences between the three sequence repeats in the molecule. These results suggest that the RH4B structure populates an unanticipated variety of structures.

Analysis and Evaluation of the Dynamic Performance of SMA Actuators for Prosthetic Hand Design

NASA Astrophysics Data System (ADS)

O'Toole, Kevin T.; McGrath, Mark M.; Coyle, Eugene

2009-08-01

It is widely acknowledged within the biomedical engineering community that shape memory alloys (SMAs) exhibit great potential for application in the actuation of upper limb prosthesis designs. These lightweight actuators are particularly suitable for prosthetic hand solutions. A four-fingered, 12 degree-of-freedom prosthetic hand has been developed featuring SMA bundle actuators embedded within the palmar structure. Joule heating of the SMA bundle actuators generates sufficient torque at the fingers to allow a wide range of everyday tasks to be carried out. Transient characterization of SMA bundles has shown that performance/response during heating and cooling differs substantially. Natural convection is insufficient to provide for adequate cooling during elongation of the actuators. An experimental test-bed has been developed to facilitate analysis of the heat transfer characteristics of the appropriately sized SMA bundle actuators for use within the prosthetic hand design. Various modes of heat sinking are evaluated so that the most effective wire-cooling solution can be ascertained. SMA bundles of varying size will be used so that a generalized model of the SMA displacement performance under natural and forced cooling conditions can be obtained. The optimum cooling solution will be implemented onto the mechanical hand framework in future work. These results, coupled with phenomenological models of SMA behavior, will be used in the development of an effective control strategy for this application in future work.

Atmosphere Kits: Hands-On Learning Activities with a Foundation in NASA Earth Science Missions.

NASA Astrophysics Data System (ADS)

Teige, V.; McCrea, S.; Damadeo, K.; Taylor, J.; Lewis, P. M., Jr.; Chambers, L. H.

2016-12-01

The Science Directorate (SD) at NASA Langley Research Center provides many opportunities to involve students, faculty, researchers, and the citizen science community in real world science. The SD Education Team collaborates with the education community to bring authentic Earth science practices and real-world data into the classroom, provide the public with unique NASA experiences, engaging activities, and advanced technology, and provide products developed and reviewed by science and education experts. Our goals include inspiring the next generation of Science, Technology, Engineering and Mathematics (STEM) professionals and improving STEM literacy by providing innovative participation pathways for educators, students, and the public. The SD Education Team has developed Atmosphere activity kits featuring cloud and aerosol learning activities with a foundation in NASA Earth Science Missions, the Next Generation Science Standards, and The GLOBE Program's Elementary Storybooks. Through cloud kit activities, students will learn how to make estimates from observations and how to categorize and classify specific cloud properties, including cloud height, cloud cover, and basic cloud types. The purpose of the aerosol kit is to introduce students to aerosols and how they can affect the colors we see in the sky. Students will engage in active observation and reporting, explore properties of light, and model the effects of changing amounts/sizes or aerosols on sky color and visibility. Learning activity extensions include participation in ground data collection of environmental conditions and comparison and analysis to related NASA data sets, including but not limited to CERES, CALIPSO, CloudSat, and SAGE III on ISS. This presentation will provide an overview of multiple K-6 NASA Earth Science hands-on activities and free resources will be available.

Getting a Grip on Memory: Unilateral Hand Clenching Alters Episodic Recall

DTIC Science & Technology

2013-04-24

States of America Abstract Unilateral hand clenching increases neuronal activity in the frontal lobe of the contralateral hemisphere. Such hand clenching...Simple clenching of one versus the other hand increases the neuronal activity of the frontal lobe in the opposite (contralateral) hemisphere [1], [2...hemispheres are thought to be differentially involved in many functions, including language , emotion, spatial processing, and local/global informa

Hands-On Experiences with Buoyant-Less Water

ERIC Educational Resources Information Center

Slisko, Josip; Planinsic, Gorazd

2010-01-01

The phenomenon of weightlessness is known to students thanks to videos of amazing things astronauts do in spaceships orbiting the Earth. In this article we propose two hands-on activities which give students opportunities to infer by themselves the absence of buoyant force in a gravity accelerated system. The system is a free-falling or vertically…

Hand Robotic Therapy in Children with Hemiparesis: A Pilot Study.

PubMed

Bishop, Lauri; Gordon, Andrew M; Kim, Heakyung

2017-01-01

The aim of this study was to understand the impact of training with a hand robotic device on hand paresis and function in a population of children with hemiparesis. Twelve children with hemiparesis (mean age, 9 [SD, 3.64] years) completed participation in this prospective, experimental, pilot study. Participants underwent clinical assessments at baseline and again 6 weeks later with instructions to not initiate new therapies. After these assessments, participants received 6 weeks of training with a hand robotic device, consisting of 1-hour sessions, 3 times weekly. Assessments were repeated on completion of training. Results showed significant improvements after training on the Assisting Hand Assessment (mean difference, 2.0 Assisting Hand Assessment units; P = 0.011) and on the upper-extremity component of the Fugl-Meyer scale (raw score mean difference, 4.334; P = 0.001). No significant improvements between pretest and posttest were noted on the Jebsen-Taylor Test of Hand Function, the Quality of Upper Extremity Skills Test, or the Pediatric Evaluation of Disability Inventory after intervention. Total active mobility of digits and grip strength also failed to demonstrate significant changes after training. Participants tolerated training with the hand robotic device, and significant improvements in bimanual hand use, as well as impairment-based scales, were noted. Improvements were carried over into bimanual skills during play. Complete the self-assessment activity and evaluation online at http://www.physiatry.org/JournalCME CME OBJECTIVES: Upon completion of this article, the reader should be able to: (1) Understand key components of neuroplasticity; (2) Discuss the benefits of robotic therapy in the recovery of hand function in pediatric patients with hemiplegia; and (3) Appropriately incorporate robotic therapy into the treatment plan of pediatric patients with hemiplegia. Advanced ACCREDITATION: The Association of Academic Physiatrists is accredited by the

The SmartHand transradial prosthesis

PubMed Central

2011-01-01

Background Prosthetic components and control interfaces for upper limb amputees have barely changed in the past 40 years. Many transradial prostheses have been developed in the past, nonetheless most of them would be inappropriate if/when a large bandwidth human-machine interface for control and perception would be available, due to either their limited (or inexistent) sensorization or limited dexterity. SmartHand tackles this issue as is meant to be clinically experimented in amputees employing different neuro-interfaces, in order to investigate their effectiveness. This paper presents the design and on bench evaluation of the SmartHand. Methods SmartHand design was bio-inspired in terms of its physical appearance, kinematics, sensorization, and its multilevel control system. Underactuated fingers and differential mechanisms were designed and exploited in order to fit all mechatronic components in the size and weight of a natural human hand. Its sensory system was designed with the aim of delivering significant afferent information to the user through adequate interfaces. Results SmartHand is a five fingered self-contained robotic hand, with 16 degrees of freedom, actuated by 4 motors. It integrates a bio-inspired sensory system composed of 40 proprioceptive and exteroceptive sensors and a customized embedded controller both employed for implementing automatic grasp control and for potentially delivering sensory feedback to the amputee. It is able to perform everyday grasps, count and independently point the index. The weight (530 g) and speed (closing time: 1.5 seconds) are comparable to actual commercial prostheses. It is able to lift a 10 kg suitcase; slippage tests showed that within particular friction and geometric conditions the hand is able to stably grasp up to 3.6 kg cylindrical objects. Conclusions Due to its unique embedded features and human-size, the SmartHand holds the promise to be experimentally fitted on transradial amputees and employed as a bi

The Relationship between Active Hand and Ear Advantage in the Native and Foreign Language

ERIC Educational Resources Information Center

Mildner, V.; Stankovic, D.; Petkovic, M.

2005-01-01

In an experimental design involving two auditorily presented competing commands (one to each ear), 144 right-handed subjects (72 male and 72 female) were asked to provide motor responses. Half of each group of subjects was responding with their right hand and the other half with the left. The test was applied in the subjects' native language…

Carroll County hands-on elementary science

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herlocker, H.G.; Dunkleberger, G.L.

1994-12-31

Carroll County Hands-on Elementary Science is a nationally recognized Elementary Science Curriculum which has been disseminated in forty states, Puerto Rico, The Virgin Islands, Saipan, and Samoa. The curriculum is a non-textbook, process-based, constructivist approach to teaching science. Unique features of this curriculum include its teacher-written daily lesson plan format, its complete kit of science supplies, and its complete set of Spanish materials. In order to be included by the National Diffusion Network, Hands-on Elementary Science collected data to support the following claims: the program enhances teacher and student attitudes toward science; the program changes both the amount and themore » type of science instruction; the program is adaptable and transportable; the teacher training component is effective. The poster display will feature sample activities, data which demonstrates the effectiveness of the staff development plan, and samples which show the degree to which the program supports selected state curriculum frameworks.« less

The effect of perineal control with hands-on and hand-poised methods on perineal trauma and delivery outcome

PubMed Central

Foroughipour, Azam; Firuzeh, Farah; Ghahiri, Ataolah; Norbakhsh, Vajihe; Heidari, Tayebeh

2011-01-01

BACKGROUND: The objective of the present study was to evaluate the effect of the two methods of delivery, “hands-on” vs. “hands poised”, on perineal trauma and delivery outcome in primiparous women referred to Shariati Hospital of Isfahan during 2007-2008. METHODS: In a clinical trial study, 100 low risk primiparous pregnant women were randomly assigned to two hands-on and hand-poised (hands-off) groups. In the hands-on group, this method was used to control fetal head in the second stage of labor. It means that the fingers of one hand supported fetal occiput and the other hand applied slight pressure on the head to control the delivery of the head during the crowning process. In the hands-poised group, midwife observed the parturient woman and do not touch perineum during the second labor stage while fetal head was delivering. Then, the two groups were compared in terms of perineal trauma, as well as neonatal and delivery outcome. RESULTS: Demographic characteristics of all studied women were similar in two groups. The rate of episiotomy was higher in hands-on group (84% vs. 40%, p = 0.001). The rate of postpartum hemorrhage (4th stage) was higher in hands-on group (12% vs. 4%, p = 0.04). The rate of mild and moderate postpartum pain in hands-on group was higher than hands-off group (70% vs. 58% and 29% vs. 10%, p < 0.001) but sever pain was not different in two groups. CONCLUSIONS: It seems that hands-poised method is associated with less perineal trauma, particularly regarding the lower need for episiotomy and postpartum hemorrhage. PMID:22279480

Does Hands-On Science Practices Make an Impact on Achievement in Science? A Meta-Analysis

ERIC Educational Resources Information Center

Caglak, Serdar

2017-01-01

This study aimed to investigate to what extent the use of hands-on science activities influences on students? academic achievement in science. Review of literature revealed several research studies focusing upon such aim and thus, a meta-analysis of these researches was carried out to obtain an overall effect size estimate of hands-on science…

Design and Test of a Closed-Loop FES System for Supporting Function of the Hemiparetic Hand Based on Automatic Detection using the Microsoft Kinect sensor.

PubMed

Simonsen, Daniel; Spaich, Erika G; Hansen, John; Andersen, Ole K

2016-10-26

This paper describes the design of a FES system automatically controlled in a closed loop using a Microsoft Kinect sensor, for assisting both cylindrical grasping and hand opening. The feasibility of the system was evaluated in real-time in stroke patients with hand function deficits. A hand function exercise was designed in which the subjects performed an arm and hand exercise in sitting position. The subject had to grasp one of two differently sized cylindrical objects and move it forward or backwards in the sagittal plane. This exercise was performed with each cylinder with and without FES support. Results showed that the stroke patients were able to perform up to 29% more successful grasps when they were assisted by FES. Moreover, the hand grasp-and-hold and hold-and-release durations were shorter for the smaller of the two cylinders. FES was appropriately timed in more than 95% of all trials indicating successful closed loop FES control. Future studies should incorporate options for assisting forward reaching in order to target a larger group of stroke patients.

Premotor activations in response to visually presented single letters depend on the hand used to write: a study on left-handers.

PubMed

Longcamp, Marieke; Anton, Jean-Luc; Roth, Muriel; Velay, Jean-Luc

2005-01-01

In a previous fMRI study on right-handers (Rhrs), we reported that part of the left ventral premotor cortex (BA6) was activated when alphabetical characters were passively observed and that the same region was also involved in handwriting [Longcamp, M., Anton, J. L., Roth, M., & Velay, J. L. (2003). Visual presentation of single letters activates a premotor area involved in writing. NeuroImage, 19, 1492-1500]. We therefore suggested that letter-viewing may induce automatic involvement of handwriting movements. In the present study, in order to confirm this hypothesis, we carried out a similar fMRI experiment on a group of left-handed subjects (Lhrs). We reasoned that if the above assumption was correct, visual perception of letters by Lhrs might automatically activate cortical motor areas coding for left-handed writing movements, i.e., areas located in the right hemisphere. The visual stimuli used here were either single letters, single pseudoletters, or a control stimulus. The subjects were asked to watch these stimuli attentively, and no response was required. The results showed that a ventral premotor cortical area (BA6) in the right hemisphere was specifically activated when Lhrs looked at letters and not at pseudoletters. This right area was symmetrically located with respect to the left one activated under the same circumstances in Rhrs. This finding supports the hypothesis that visual perception of written language evokes covert motor processes. In addition, a bilateral area, also located in the premotor cortex (BA6), but more ventrally and medially, was found to be activated in response to both letters and pseudoletters. This premotor region, which was not activated correspondingly in Rhrs, might be involved in the processing of graphic stimuli, whatever their degree of familiarity.

Effect of Observation of Simple Hand Movement on Brain Activations in Patients with Unilateral Cerebral Palsy: An fMRI Study

ERIC Educational Resources Information Center

Dinomais, Mickael; Lignon, Gregoire; Chinier, Eva; Richard, Isabelle; Minassian, Aram Ter; The Tich, Sylvie N'Guyen

2013-01-01

The aim of this functional magnetic resonance imaging (fMRI) study was to examine and compare brain activation in patients with unilateral cerebral palsy (CP) during observation of simple hand movement performed by the paretic and nonparetic hand. Nineteen patients with clinical unilateral CP (14 male, mean age 14 years, 7-21 years) participated…

An American Society for Surgery of the Hand (ASSH) task force report on hand surgery subspecialty certification and ASSH membership.

PubMed

Goldfarb, Charles A; Lee, W P Andrew; Briskey, Dawn; Higgins, James P

2014-02-01

A task force for the American Society for Surgery of the Hand (ASSH) recently investigated the practice patterns, board certification, subspecialty certification status, and ASSH membership of hand surgeons after completion of fellowship training. A total of 37% of the fellowship graduates from 2000 to 2006 had not attained subspecialty certification for a variety of reasons. A smaller group of fellowship graduates obtained the subspecialty certification but had not become Active Members of the ASSH. Efforts to strengthen the hand surgeon community and best serve our patients should focus on evolving patterns in post fellowship choices that reflect practice type choices and generational changes. Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

Fitting a hand-glove prosthesis to enhance the reconstructed mutilated hand.

PubMed

Leow, M E; Kour, A K; Pereira, B P; Pho, R W

1998-03-01

Microsurgical reconstruction of the severely mutilated hand aimed at improving prehensile functions often does not address the esthetic aspects of the hand. The poor appearance of the reconstructed hand affects its active display and use. A hand-glove prosthesis may be prescribed in this instance to enhance the overall form and function of the mutilated hand. We reviewed 16 cases of mutilating hand injuries in which surgical reconstructions were performed and the patients were subsequently fitted with a hand-glove prosthesis to augment the outcome. An improved appearance was achieved in all patients fitted with the prosthesis. The patients' sense of confidence was also enhanced, which in turn promoted the active and open use of the reconstructed hands. While prescribed primarily to improve the appearance of the reconstructed hands, these prostheses were documented to enhance the physical hand functions in 11 cases by increasing the span of the hand and providing an opposable post and a palmar base for holding and for anchorage. The prosthesis enhanced assistive functions of the reconstructed hands and freed the contralateral normal hand for use in bimanual activities, such as holding a wallet and taking out money, supporting a note pad for writing, and holding a plate at buffet receptions. At the 18-month follow-up visit, 13 (87%) of the patients continued to use their prosthesis. Wear and tear were problems associated with the frequent use of the prosthesis. The expected life span of the prosthesis with daily use ranged from 2 to 3 years. All the patients acknowledged that the prosthesis played a role in their rehabilitation and that it helped them to overcome the initial psychological trauma and to come to terms with their physical loss.

Hand Function and Appearance following Reconstruction for Congenital Hand Differences: A Qualitative Analysis of Children and Parents.

PubMed

Kelley, Brian P; Franzblau, Lauren E; Chung, Kevin C; Carlozzi, Noelle; Waljee, Jennifer F

2016-07-01

Congenital hand differences induce social, psychological, and functional challenges for children. However, little is known about how children perceive their outcomes after reconstructive or what concerns children have. A total of 33 children (aged 6 to 17 years) who were treated for congenital hand differences, and their parents, participated in qualitative, semistructured interviews regarding the child's hand function and appearance. Discussion focused on the influence of congenital hand differences on the child's daily activities, school, and participation in sports and music. The interviews were open format to allow for spontaneous emergence of relevant themes followed by guided questioning. The interviews were transcribed verbatim and analyzed using qualitative coding, iterative comparisons, and frequency analysis to reveal perceptions of children and parents. In this sample, 73 percent of children and parents reported difficulty with hand function. Children experienced difficulties with personal care (58 percent), school activities (30 percent), and household tasks (27 percent). Children were bothered by hand appearance (48 percent), pain (30 percent), and weakness (24 percent). Complex anomalies were associated with greater disability and limitation in sports and music. Children with congenital hand differences are concerned with the aesthetics of their hands and limitations in their ability to perform activities. Children were often discouraged by activities that their peers accomplished easily, but with increasing age demonstrated adaptive behaviors to accommodate in their "own way," suggesting the uniqueness of their limitations. Patients may benefit from early hand therapy guided toward areas of concern to enhance functional adaptation.

Using robots in "Hands-on" academic activities: a case study examining speech-generating device use and required skills.

PubMed

Adams, Kim; Cook, Al

2016-01-01

A 12-year-old girl, Emily, with complex communication needs and severe physical limitations, controlled a Lego robot from a speech-generating device (SGD) to do various "hands-on" academic activities. Emily's teacher and assistive technology (AT) team thought that controlling a robot would motivate Emily to "use her SGD more". A descriptive case study was used because the integration of communication and manipulation technologies is not yet understood. Target activities and goals were chosen by Emily's teacher and AT team. Emily performed several manipulative math activities and engaged in an "acting" activity aimed at increasing her message length. The competency skills needed to control a robot from the SGD were examined, as well as stakeholder satisfaction with the robot system. Emily generated up to 0.4 communication events and 7 robot commands per minute in the activities. Her length of utterance was usually one-word long, but she generated two- and three-word utterances during some activities. Observations of Emily informed a framework to describe the competency skills needed to use SGDs to control robots. Emily and her teacher expressed satisfaction with robot use. Robot use could motivate students to build SGD operational skills and learn educational concepts. Implications for Rehabilitation Controlling a robot from a speech-generating device (SGD) could increase students' motivation, engagement and understanding in learning educational concepts, because of the hands-on enactive approach. The robot and SGD system was acceptable to the participant and teacher and elicited positive comments from classmates. Thus, it may provide a way for children with disabilities to link with the curriculum and with other students in the classroom. Controlling a robot via SGD presents opportunities to improve augmentative and alternative communication operational, linguistic, social and strategic skills. Careful choice of activities will ensure that the activity requirements

Studies on hand-held visual communication device for the deaf and speech-impaired 2. Keyboard design.

PubMed

Thurlow, W R

1980-01-01

Experiments with keyboard arrangements of letters show that simple alphabetic letter-key sequences with 4 to 5 letters in a row lead to most rapid visual search performance. Such arrangements can be used on keyboards operated by the index finger of one hand. Arrangement of letters in words offers a promising alternative because these arrangements can be readily memorized and can result in small interletter distances on the keyboard for frequently occurring letter sequences. Experiments on operation of keyboards show that a space or shift key operated by the left hand (which also holds the communication device) results in faster keyboard operation than when space or shift keys on the front of the keyboard (operated by right hand) are used. Special problems of the deaf-blind are discussed. Keyboard arrangements are investigated, and matching tactual codes are suggested.

Effect of hand sanitizer on the performance of fingermark detection techniques.

PubMed

Chadwick, Scott; Neskoski, Melissa; Spindler, Xanthe; Lennard, Chris; Roux, Claude

2017-04-01

Hand sanitizers have seen a rapid increase in popularity amongst the general population and this increased use has led to the belief that hand sanitizers may have an effect on subsequent fingermark detection. Based on this hypothesis, three alcoholic and two non-alcoholic hand sanitizers were evaluated to determine the effect they had on the detection of fingermarks deposited after their use. The following fingermark detection methods were applied: 1,2-indanedione-zinc, ninhydrin, physical developer (porous substrate); and cyanoacrylate, rhodamine 6G, magnetic powder (non-porous substrate). Comparison between hand sanitized fingermarks and non-hand sanitized fingermarks showed that the alcohol-based hand sanitizers did not result in any visible differences in fingermark quality. The non-alcoholic hand sanitizers, however, improved the quality of fingermarks developed with 1,2-indanedione-zinc and ninhydrin, and marginally improved those developed with magnetic powder. Different parameters, including time since hand sanitizer application prior to fingermark deposition and age of deposited mark, were tested to determine the longevity of increased development quality. The non-alcoholic hand sanitized marks showed no decrease in quality when aged for up to two weeks. The time since sanitizer application was determined to be an important factor that affected the quality of non-alcoholic hand sanitized fingermarks. It was hypothesized that the active ingredient in non-alcoholic hand sanitizers, benzalkonium chloride, is responsible for the increase in fingermark development quality observed with amino acid reagents, while the increased moisture content present on the ridges resulted in better powdered fingermarks. Copyright © 2017 Elsevier B.V. All rights reserved.

Multiple sensor smart robot hand with force control

NASA Technical Reports Server (NTRS)

Killion, Richard R.; Robinson, Lee R.; Bejczy, Antal

1987-01-01

A smart robot hand developed at JPL for the Protoflight Manipulator Arm (PFMA) is described. The development of this smart hand was based on an integrated design and subsystem architecture by considering mechanism, electronics, sensing, control, display, and operator interface in an integrated design approach. The mechanical details of this smart hand and the overall subsystem are described elsewhere. The sensing and electronics components of the JPL/PFMA smart hand are summarized and it is described in some detail in control capabilities.

Young children's hand contact activities: an observational study via videotaping in primarily outdoor residential settings.

PubMed

Auyeung, Willa; Canales, Robert A; Beamer, Paloma; Ferguson, Alesia C; Leckie, James O

2006-09-01

Microlevel activity time series (MLATS) data were gathered on hand contact activities of 38 children (1-6 years old) by videotaping in primarily outdoor residential environments. The videotape recordings were then translated into text files using a specialized software called VirtualTimingDevicetrade mark. Contact frequency (contacts/h), duration per contact (s/contact), and hourly contact duration (min/h) were summarized for outdoor hand contacts with 15 distinct object/surface categories ("Animal", "Body", "Clothes/Towels", "Fabric", "Floor", "Food", "Footwear", "Metal", "Non-dietary Water", "Paper/Wrapper", "Plastic", "Rock/Brick", "Toys", "Vegetation/Grass", and "Wood") and two aggregate object/surface categories ("Non-dietary objects/surfaces" and "Total objects/surfaces"). For outdoor both hand contacts with "Total objects/surfaces", contact frequencies ranged from 229.9 to 1517.7 contacts/h, median durations/contact ranged from < 1 to 5 s, and hourly contact durations ranged from 42.6 to 102.2 m/h. The data were analyzed for significant differences in hand contact activities as a function of (1) age, (2) location, (3) gender, and (4) hand. Significant differences (P < or = 0.05) were found for all four factors analyzed. Hourly contact durations with "Non-dietary objects/surfaces" and "Total objects/surfaces" increased with age (P = 0.01, rs = 0.42 and P = 0.005, rs = 0.46, respectively), while contact frequencies and hourly contact durations with "Wood" decreased with age (P = 0.02, rs = -0.38 and P = 0.05, rs = -0.32, respectively). Location was found to affect contact frequencies and hourly contact durations with certain objects/surfaces. For example, contact frequencies and hourly contact durations with "Fabric" were higher indoors (P = 0.02 for both), while contact frequencies and hourly contact durations with "Vegetation/Grass" were higher outdoors (P = 0.02 and P = 0.04, respectively). Girls had longer hourly contact durations with "Footwear" (P = 0

A compact in vivo neutron activation analysis system to quantify manganese in human hand bone

NASA Astrophysics Data System (ADS)

Liu, Yingzi

As an urgent issue of correlating cumulative manganese (Mn) exposure to neurotoxicity, bone has emerged as an attractive biomarker for long-term Mn deposition and storage. A novel Deuterium-Deuterium (DD) neutron generator irradiation system has been simulated and constructed, incorporating moderator, reflector and shielding. This neutron activation analysis (NAA) irradiation assembly presents several desirable features, including high neutron flux, improved detection limit and acceptable neutron & photon dose, which would allow it be ready for clinical measurement. Key steps include simulation modeling and verifying, irradiation system design, detector characterization, and neutron flux and dose assessment. Activation foils were also analyzed to reveal the accurate neutron spectrum in the irradiation cave. The detection limit with this system is 0.428 ppm with 36 mSv equivalent hand dose and 52 microSv whole body effective dose.

Design and fabrication of a three-finger prosthetic hand using SMA muscle wires

NASA Astrophysics Data System (ADS)

Simone, Filomena; York, Alexander; Seelecke, Stefan

2015-03-01

Bio-inspired hand-like gripper systems based on shape memory alloy (SMA) wire actuation have the potential to enable a number of useful applications in, e.g., the biomedical field or industrial assembly systems. The inherent high energy density makes SMA solutions a natural choice for systems with lightweight, low noise and high force requirements, such as hand prostheses or robotic systems in a human/machine environment. The focus of this research is the development, design and realization of a SMA-actuated prosthetic hand prototype with three fingers. The use of thin wires (100 μm diameter) allows for high cooling rates and therefore fast movement of each finger. Grouping several small wires mechanically in parallel allows for high force actuation. To save space and to allow for a direct transmission of the motion to each finger, the SMA wires are attached directly within each finger, across each phalanx. In this way, the contraction of the wires will allow the movement of the fingers without the use of any additional gears. Within each finger, two different bundles of wires are mounted: protagonist ones that create bending movement and the antagonist ones that enable stretching of each phalanx. The resistance change in the SMA wires is measured during actuation, which allows for monitoring of the wire stroke and potentially the gripping force without the use of additional sensors. The hand is built with modern 3D-printing technologies and its performance while grasping objects of different size and shape is experimentally investigated illustrating the usefulness of the actuator concept.

Dextrous robot hands

NASA Technical Reports Server (NTRS)

Venkataraman, Subramanian T. (Editor); Iberall, Thea (Editor)

1990-01-01

Recent studies of human hand function and their implications for the design of robot hands are discussed in reviews and reports. Topics addressed include human grasp choice and robotic grasp analysis, opposition space and human prehension, coordination in normal and prosthetic reaching, and intelligent exploration by the human hand. Consideration is given to a task-oriented dextrous manipulation architecture, the control architecture for the Belgrade/USC hand, the analysis of multifingered grasping and manipulation, and tactile sensing for shape interpretation. Diagrams, graphs, and photographs are provided.

Skin reactions related to hand hygiene and selection of hand hygiene products.

PubMed

Larson, Elaine; Girard, Raphaelle; Pessoa-Silva, Carmem Lucia; Boyce, John; Donaldson, Liam; Pittet, Didier

2006-12-01

In October 2004, The World Health Organization (WHO) launched the World Alliance for Patient Safety. Within the alliance, the first priority of the Global Patient Safety Challenge is to reduce health care-associated infection. A key action within the challenge is to promote hand hygiene in health care globally as well as at the country level through the campaign "Clean Care is Safer Care." As a result, the WHO is developing Guidelines on Hand Hygiene in Health Care, designed to be applicable throughout the world. This paper summarizes one component of the global WHO guidelines related to the impact of hand hygiene on the skin of health care personnel, including a discussion of types of skin reactions associated with hand hygiene, methods to reduce adverse reactions, and factors to consider when selecting hand hygiene products. Health care professionals have a higher prevalence of skin irritation than seen in the general population because of the necessity for frequent hand hygiene during patient care. Ways to minimize adverse effects of hand hygiene include selecting less irritating products, using skin moisturizers, and modifying certain hand hygiene practices such as unnecessary washing. Institutions need to consider several factors when selecting hand hygiene products: dermal tolerance and aesthetic preferences of users as well as practical considerations such as convenience, storage, and costs.

An electromyographic study of the effect of hand grip sizes on forearm muscle activity and golf performance.

PubMed

Sorbie, Graeme G; Hunter, Henry H; Grace, Fergal M; Gu, Yaodong; Baker, Julien S; Ugbolue, Ukadike Chris

2016-01-01

The study describes the differences in surface electromyography (EMG) activity of two forearm muscles in the lead and trail arm at specific phases of the golf swing using a 7-iron with three different grip sizes among amateur and professional golfers. Fifteen right-handed male golfers performed five golf swings using golf clubs with three different grip sizes. Surface EMG was used to measure muscle activity of the extensor carpi radialis brevis (ECRB) and flexor digitorum superficialis (FDS) on both forearms. There were no significant differences in forearm muscle activity when using the three golf grips within the group of 15 golfers (p > 0.05). When using the undersize grip, club head speed significantly increased (p = 0.044). During the backswing and downswing phases, amateurs produced significantly greater forearm muscle activity with all three grip sizes (p < 0.05). In conclusion, forearm muscle activity is not affected by grip sizes. However, club head speed increases when using undersize grips.

A Helping Hand.

ERIC Educational Resources Information Center

Renner, Jason M.

2000-01-01

Discusses how designing a hand washing-friendly environment can help to reduce the spread of germs in school restrooms. Use of electronic faucets, surface risk management, traffic flow, and user- friendly hand washing systems that are convenient and maximally hygienic are examined. (GR)

"Hand-it-on": an innovative simulation on the relation of non-technical skills to healthcare.

PubMed

Dieckmann, Peter; Zeltner, Louise Graae; Helsø, Anne-Mette

2016-01-01

Non-technical skills (NTS) are an integral part of the abilities healthcare professionals need to optimally care for patients. Integrating NTS into the already complex tasks of healthcare can be a challenge for clinicians. Integrating NTS into simulation-based training increases the demands for simulation instructors with regard to scenario design, conduct, and debriefing. We introduce a simulation game, Hand-it-on , that can trigger discussions on how NTS can influence work processes. Hand-it-on aims to help clinicians and simulation instructors alike to improve their understanding of NTS concepts and where they can apply them in their work. It complements existing approaches to teaching NTS by limiting the complexity of the game and by removing medical content, allowing learners to concentrate on NTS. Hand-it-on is relevant for groups and teams working across the range of different healthcare contexts. During Hand-it-on, participants stand in a circle and hand on everyday objects to each other according to simple rules, resulting in many events that can be debriefed in relation to safe patient care. We describe both the conduct of Hand-it-on and ideas on how to debrief participants. We provide variations that can be used in different contexts, focusing the exercise on different learning goals. We also offer the theoretical rationale for using an out-of-context simulation in combination with other forms of teaching. Although we did not evaluate Hand-it-on formally, oral feedback from participants and the replication of Hand-it-on by many simulation teams support its value.

Design, data, and theory regarding a digital hand inclinometer: a portable device for studying slant perception.

PubMed

Li, Zhi; Durgin, Frank H

2011-06-01

Palm boards are often used as a nonverbal measure in human slant perception studies. It was recently found that palm boards are biased and relatively insensitive measures, and that an unrestricted hand gesture provides a more sensitive response (Durgin, Hajnal, Li, Tonge, & Stigliani, Acta Psychologica, 134, 182-197, 2010a). In this article, we describe an original design for a portable lightweight digital device for measuring hand orientation. This device is microcontroller-based and uses a micro inclinometer chip as its inclination sensor. The parts are fairly inexpensive. This device, used to measure hand orientation, provides a sensitive nonverbal method for studying slant perception, which can be used in both indoor and outdoor environments. We present data comparing the use of a free hand to palm-board and verbal measures for surfaces within reach and explain how to interpret free-hand measures for outdoor hills.

The effect of elbow flexor fatigue on spine kinematics and muscle activation in response to sudden loading at the hands.

PubMed

Zwambag, Derek P; Freeman, Nikole E; Brown, Stephen H M

2015-04-01

Sudden loads, originating at either the hands or the feet, can cause injury to spine structures. As muscles are primarily responsible for stabilization following a perturbation, the effect of spine muscle fatigue in this context has been well investigated. However, the effect of fatigue of arm muscles, which can help control perturbations originating at the hands, on the spine is unknown. The purpose of this study was to determine if the magnitude of spine flexion or the pre-activation, reflex amplitude, and reflex latency of spine muscles were altered by elbow flexor fatigue during a sudden loading (6.8 kg) perturbation at the hands. Elbow flexor fatigue was induced by an isometric 30% maximal elbow flexion moment until failure. Results demonstrate that spine kinematics were not altered in the presence of elbow flexor fatigue. Small magnitude differences in trunk muscle pre- and peak activation indicate that the presence of elbow flexor fatigue does not necessitate substantially greater spine muscle action under the tested conditions. Despite fatigued elbow flexors, the arm muscles were sufficiently able to control the perturbation. Interestingly, 5/14 participants demonstrated altered reflex latencies in all observed muscles that lasted up to 10 min after the fatiguing task. Copyright © 2015 Elsevier Ltd. All rights reserved.

Programming of left hand exploits task set but that of right hand depends on recent history.

PubMed

Tang, Rixin; Zhu, Hong

2017-07-01

There are many differences between the left hand and the right hand. But it is not clear if there is a difference in programming between left hand and right hand when the hands perform the same movement. In current study, we carried out two experiments to investigate whether the programming of two hands was equivalent or they exploited different strategies. In the first experiment, participants were required to use one hand to grasp an object with visual feedback or to point to the center of one object without visual feedback on alternate trials, or to grasp an object without visual feedback and to point the center of one object with visual feedback on alternating trials. They then performed the tasks with the other hand. The result was that previous pointing task affected current grasping when it was performed by the left hand, but not the right hand. In experiment 2, we studied if the programming of the left (or right) hand would be affected by the pointing task performed on the previous trial not only by the same hand, but also by the right (or left) hand. Participants pointed and grasped the objects alternately with two hands. The result was similar with Experiment 1, i.e., left-hand grasping was affected by right-hand pointing, whereas right-hand grasping was immune from the interference from left hand. Taken together, the results suggest that when open- and closed-loop trials are interleaved, motor programming of grasping with the right hand was affected by the nature of the online feedback on the previous trial only if it was a grasping trial, suggesting that the trial-to-trial transfer depends on sensorimotor memory and not on task set. In contrast, motor programming of grasping with the left hand can use information about the nature of the online feedback on the previous trial to specify the parameters of the movement, even when the type of movement that occurred was quite different (i.e., pointing) and was performed with the right hand. This suggests that

An automated time and hand motion analysis based on planar motion capture extended to a virtual environment

NASA Astrophysics Data System (ADS)

Tinoco, Hector A.; Ovalle, Alex M.; Vargas, Carlos A.; Cardona, María J.

2015-09-01

In the context of industrial engineering, the predetermined time systems (PTS) play an important role in workplaces because inefficiencies are found in assembly processes that require manual manipulations. In this study, an approach is proposed with the aim to analyze time and motions in a manual process using a capture motion system embedded to a virtual environment. Capture motion system tracks IR passive markers located on the hands to take the positions of each one. For our purpose, a real workplace is virtually represented by domains to create a virtual workplace based on basic geometries. Motion captured data are combined with the virtual workplace to simulate operations carried out on it, and a time and motion analysis is completed by means of an algorithm. To test the methodology of analysis, a case study was intentionally designed using and violating the principles of motion economy. In the results, it was possible to observe where the hands never crossed as well as where the hands passed by the same place. In addition, the activities done in each zone were observed and some known deficiencies were identified in the distribution of the workplace by computational analysis. Using a frequency analysis of hand velocities, errors in the chosen assembly method were revealed showing differences in the hand velocities. An opportunity is seen to classify some quantifiable aspects that are not identified easily in a traditional time and motion analysis. The automated analysis is considered as the main contribution in this study. In the industrial context, a great application is perceived in terms of monitoring the workplace to analyze repeatability, PTS, workplace and labor activities redistribution using the proposed methodology.

iHand: an interactive bare-hand-based augmented reality interface on commercial mobile phones

NASA Astrophysics Data System (ADS)

Choi, Junyeong; Park, Jungsik; Park, Hanhoon; Park, Jong-Il

2013-02-01

The performance of mobile phones has rapidly improved, and they are emerging as a powerful platform. In many vision-based applications, human hands play a key role in natural interaction. However, relatively little attention has been paid to the interaction between human hands and the mobile phone. Thus, we propose a vision- and hand gesture-based interface in which the user holds a mobile phone in one hand but sees the other hand's palm through a built-in camera. The virtual contents are faithfully rendered on the user's palm through palm pose estimation, and reaction with hand and finger movements is achieved that is recognized by hand shape recognition. Since the proposed interface is based on hand gestures familiar to humans and does not require any additional sensors or markers, the user can freely interact with virtual contents anytime and anywhere without any training. We demonstrate that the proposed interface works at over 15 fps on a commercial mobile phone with a 1.2-GHz dual core processor and 1 GB RAM.

Diving into Science. Hands-On Water-Related Experiments. Grades 2-4.

ERIC Educational Resources Information Center

Perdue, Peggy K.

This book contains hands-on ocean-related laboratory activities. Major chapter hearings are: (1) "Water Experiments" (dealing with the physical nature of water and listing 10 activities); (2) "Ocean-Going Vessels" (studying the principles of boats, with three experiments); (3) "Experiments Using Shells" (containing four activities); (4) "Sand…

Methodology for designing and manufacturing complex biologically inspired soft robotic fluidic actuators: prosthetic hand case study.

PubMed

Thompson-Bean, E; Das, R; McDaid, A

2016-10-31

We present a novel methodology for the design and manufacture of complex biologically inspired soft robotic fluidic actuators. The methodology is applied to the design and manufacture of a prosthetic for the hand. Real human hands are scanned to produce a 3D model of a finger, and pneumatic networks are implemented within it to produce a biomimetic bending motion. The finger is then partitioned into material sections, and a genetic algorithm based optimization, using finite element analysis, is employed to discover the optimal material for each section. This is based on two biomimetic performance criteria. Two sets of optimizations using two material sets are performed. Promising optimized material arrangements are fabricated using two techniques to validate the optimization routine, and the fabricated and simulated results are compared. We find that the optimization is successful in producing biomimetic soft robotic fingers and that fabrication of the fingers is possible. Limitations and paths for development are discussed. This methodology can be applied for other fluidic soft robotic devices.

Individual left-hand and right-hand intra-digit representations in human primary somatosensory cortex.

PubMed

Schweisfurth, Meike A; Frahm, Jens; Schweizer, Renate

2015-09-01

Individual intra-digit somatotopy of all phalanges of the middle and little finger of the right and left hand was studied by functional magnetic resonance imaging in 12 healthy subjects. Phalanges were tactilely stimulated and activation in BA 3b of the human primary somatosensory cortex could be observed for each individual phalanx. Activation peaks were further analysed using the Direction/Order (DiOr) method, which identifies somatotopy, if a significantly high number of subjects exhibit ordered distal-to-proximal phalanx representions along a similar direction. Based on DiOr, ordered and similar-direction-aligned intra-digit maps across subjects were found at the left hand for the little and middle finger and at the right hand for the little finger. In these digits the proximal phalanges were represented more medially along the course of the central sulcus than the distal phalanges. This is contrasted by the intra-digit maps for the middle finger of the right hand, which showed larger inter-subject variations of phalanx alignments without a similar within-digit representation across subjects. As all subjects were right-handed and as the middle finger of the dominant hand probably plays a more individual role in everyday tactile performance than the little finger of the right hand and all left-hand digits, the observed variation might reflect a functional somatotopy based on individual use of that particular digit at the dominant hand. © 2015 Federation of European Neuroscience Societies and John Wiley & Sons Ltd.

Design and control of a prosthetic leg for above-knee amputees operated in semi-active and active modes

NASA Astrophysics Data System (ADS)

Park, Jinhyuk; Yoon, Gun-Ha; Kang, Je-Won; Choi, Seung-Bok

2016-08-01

This paper proposes a new prosthesis operated in two different modes; the semi-active and active modes. The semi-active mode is achieved from a flow mode magneto-rheological (MR) damper, while the active mode is obtained from an electronically commutated (EC) motor. The knee joint part of the above knee prosthesis is equipped with the MR damper and EC motor. The MR damper generates reaction force by controlling the field-dependent yield stress of the MR fluid, while the EC motor actively controls the knee joint angle during gait cycle. In this work, the MR damper is designed as a two-end type flow mode mechanism without air chamber for compact size. On other hand, in order to predict desired knee joint angle to be controlled by EC motor, a polynomial prediction function using a statistical method is used. A nonlinear proportional-derivative controller integrated with the computed torque method is then designed and applied to both MR damper and EC motor to control the knee joint angle. It is demonstrated that the desired knee joint angle is well achieved in different walking velocities on the ground ground.

Promoting Hand Hygiene With a Lighting Prompt.

PubMed

Diegel-Vacek, Lauren; Ryan, Catherine

2016-10-01

The objective of this pilot study was to assess an automatic sink light design intervention as a prompt for clinician hand hygiene (as defined by World Health Organization [WHO]). Healthcare-associated infections (HAIs) are still leading causes of morbidity and mortality and contribute to burdens on our healthcare system. Hand hygiene has been related to reducing the rate of HAIs and positively impacting both patient and hospital outcomes. This pilot study was a prospective, longitudinal observational study of a convenience sample of healthcare clinicians. In one inpatient room, clinicians were exposed to a hand hygiene reminder that consisted of a light turning on over the sink as they entered. A control room (the adjacent inpatient room) did not have the intervention. A total of 88 clinician encounters were monitored during the study. On the first observation day at the initial activation of the signal light system, the percentage of clinicians performing hand hygiene upon entering a room was only 7% in the control room and 23% in the intervention room. During the second observation (Day 14), those percentages were 16% in the control room and 30% in the intervention room. During the third observation (Day 21), those percentages were 23% in the control room and 23% in the intervention room. The healthcare system frequently relies on expensive technology to improve healthcare delivery, but implementation of low-cost, low-technology methods such as this light may be effective in prompting hand hygiene. © The Author(s) 2016.

Hands-on Summer Camp to Attract K-12 Students to Engineering Fields

ERIC Educational Resources Information Center

Yilmaz, Muhittin; Ren, Jianhong; Custer, Sheryl; Coleman, Joyce

2010-01-01

This paper explains the organization and execution of a summer engineering outreach camp designed to attract and motivate high school students as well as increase their awareness of various engineering fields. The camp curriculum included hands-on, competitive design-oriented engineering projects from several disciplines: the electrical,…

Effects of action observation therapy on hand dexterity and EEG-based cortical activation patterns in patients with post-stroke hemiparesis.

PubMed

Kuk, Eun-Ju; Kim, Jong-Man; Oh, Duck-Won; Hwang, Han-Jeong

2016-10-01

Previous reports have suggested that action observation training (AOT) is beneficial in enhancing the early learning of new motor tasks; however, EEG-based investigation has received little attention for AOT. The purpose of this study was to illustrate the effects of AOT on hand dexterity and cortical activation in patients with post-stroke hemiparesis. Twenty patients with post-stroke hemiparesis were randomly divided into either the experimental group (EG) or control group (CG), with 10 patients in each group. Prior to the execution of motor tasks (carrying wooden blocks from one box to another), subjects in the EG and CG observed a video clip displaying the execution of the same motor task and pictures showing landscapes, respectively. Outcome measures included the box and block test (BBT) to evaluate hand dexterity and EEG-based brain mapping to detect changes in cortical activation. The BBT scores (EG: 20.50 ± 6.62 at pre-test and 24.40 ± 5.42 at post-test; CG: 20.20 ± 6.12 at pre-test and 20.60 ± 7.17 at post-test) revealed significant main effects for the time and group and significant time-by-group interactions (p < 0.05). For the subjects in the EG, topographical representations obtained with the EEG-based brain mapping system were different in each session of the AOT and remarkable changes occurred from the 2nd session of AOT. Furthermore, the middle frontal gyrus was less active at post-test than at pre-test. These findings support that AOT may be beneficial in altering cortical activation patterns and hand dexterity.

International Space Station: 6-8 Hands-on Science and Math Lesson Plans.

ERIC Educational Resources Information Center

Armstrong, Pat

These lesson plans, designed for grades 6-8, have been developed to provide a guide to hands-on experience in science and math. They focus on an International Space Station and are designed for use with students working in groups. The three lesson plans highlighting the importance of the scientific method are: (1) International Space Station…

The International Registry on Hand and Composite Tissue Transplantation.

PubMed

Petruzzo, Palmina; Lanzetta, Marco; Dubernard, Jean-Michel; Landin, Luis; Cavadas, Pedro; Margreiter, Raimund; Schneeberger, Stephan; Breidenbach, Warren; Kaufman, Christina; Jablecki, Jerzy; Schuind, Frédéric; Dumontier, Christian

2010-12-27

The International Registry on Hand and Composite Tissue Transplantation was founded in May 2002, and the analysis of all cases with follow-up information up to July 2010 is presented here. From September 1998 to July 2010, 49 hands (17 unilateral and 16 bilateral hand transplantations, including 1 case of bilateral arm transplantation) have been reported, for a total of 33 patients. They were 31 men and 2 women (median age 32 years). Time since hand loss ranged from 2 months to 34 years, and in 46% of cases, the level of amputation was at wrist. Immunosuppressive therapy included tacrolimus, mycophenolate mofetil, sirolimus, and steroids; polyclonal or monoclonal antibodies were used for induction. Topical immunosuppression was also used in several cases. Follow-up ranges from 1 month to 11 years. One patient died on day 65. Three patients transplanted in the Western countries have lost their graft, whereas until September 2009, seven hand grafts were removed for noncompliance to the immunosuppressive therapy in China. Eighty-five percent of recipients experienced at least one episode of acute rejection within the first year, and they were reversible when promptly treated. Side effects included opportunistic infections, metabolic complications, and malignancies. All patients developed protective sensibility, 90% of them developed tactile sensibility, and 82.3% also developed a discriminative sensibility. Motor recovery enabled patients to perform most daily activities. Hand transplantation is a complex procedure, and its success is based on patient's compliance and his or her careful evaluation before and after transplantation.

The Paper Beam: Hands-On Design for Team Work Experience of Freshman in Engineering

ERIC Educational Resources Information Center

Kalkani, Efrossini C.; Boussiakou, Iris K.; Boussiakou, Leda G.

2005-01-01

The present research refers to the assigning of a hands-on group project to freshman engineering students, evaluating their performance, and deriving conclusions on student benefits and educational advances. The research procedure included action plans for the instructor and the students, instructions to the students on performing the work,…

Concept and Design of a 3D Printed Support to Assist Hand Scanning for the Realization of Customized Orthosis.

PubMed

Baronio, Gabriele; Volonghi, Paola; Signoroni, Alberto

2017-01-01

In the rehabilitation field, the use of additive manufacturing techniques to realize customized orthoses is increasingly widespread. Obtaining a 3D model for the 3D printing phase can be done following different methodologies. We consider the creation of personalized upper limb orthoses, also including fingers, starting from the acquisition of the hand geometry through accurate 3D scanning. However, hand scanning procedure presents differences between healthy subjects and patients affected by pathologies that compromise upper limb functionality. In this work, we present the concept and design of a 3D printed support to assist hand scanning of such patients. The device, realized with FDM additive manufacturing techniques in ABS material, allows palmar acquisitions, and its design and test are motivated by the following needs: (1) immobilizing the hand of patients during the palmar scanning to reduce involuntary movements affecting the scanning quality and (2) keeping hands open and in a correct position, especially to contrast the high degree of hypertonicity of spastic subjects. The resulting device can be used indifferently for the right and the left hand; it is provided in four-dimensional sizes and may be also suitable as a palmar support for the acquisition of the dorsal side of the hand.

Concept and Design of a 3D Printed Support to Assist Hand Scanning for the Realization of Customized Orthosis

PubMed Central

Volonghi, Paola

2017-01-01

In the rehabilitation field, the use of additive manufacturing techniques to realize customized orthoses is increasingly widespread. Obtaining a 3D model for the 3D printing phase can be done following different methodologies. We consider the creation of personalized upper limb orthoses, also including fingers, starting from the acquisition of the hand geometry through accurate 3D scanning. However, hand scanning procedure presents differences between healthy subjects and patients affected by pathologies that compromise upper limb functionality. In this work, we present the concept and design of a 3D printed support to assist hand scanning of such patients. The device, realized with FDM additive manufacturing techniques in ABS material, allows palmar acquisitions, and its design and test are motivated by the following needs: (1) immobilizing the hand of patients during the palmar scanning to reduce involuntary movements affecting the scanning quality and (2) keeping hands open and in a correct position, especially to contrast the high degree of hypertonicity of spastic subjects. The resulting device can be used indifferently for the right and the left hand; it is provided in four-dimensional sizes and may be also suitable as a palmar support for the acquisition of the dorsal side of the hand. PMID:29234219

Utilization of hands-on and simulation activities for teaching middle school lunar concepts

NASA Astrophysics Data System (ADS)

Roseman, Reni B.; Jones, Dyan L.

2013-01-01

A great deal of literature exists surrounding the misconceptions that students have regarding the moon, specifically how the moon phases and eclipses occur. These studies provide teachers with information regarding what misconceptions their students may come to the classroom with as well as some ideas as to how to approach and correct them. However, these methods are not always validated with classroom-based research, and much of the research that has been done is in the high school and college setting. As such, we have undertaken a study to investigate what a group of middle school students know about the moon pre-instruction, and how hands-on activities and computer simulations affect student learning and understanding of these topics. The results of this project show that neither supplementation was distinguishably more effective in improving student test scores, as measured by normalized gains; this may be an artifact of high pre-test scores, as described herein.

Ability of Hand Hygiene Interventions Using Alcohol-Based Hand Sanitizers and Soap To Reduce Microbial Load on Farmworker Hands Soiled during Harvest.

PubMed

de Aceituno, Anna Fabiszewski; Bartz, Faith E; Hodge, Domonique Watson; Shumaker, David J; Grubb, James E; Arbogast, James W; Dávila-Aviña, Jorgé; Venegas, Fabiola; Heredia, Norma; García, Santos; Leon, Juan S

2015-11-01

Effective hand hygiene is essential to prevent the spread of pathogens on produce farms and reduce foodborne illness. The U.S. Food and Drug Administration Food Safety Modernization Act Proposed Rule for Produce Safety recommends the use of soap and running water for hand hygiene of produce handlers. The use of alcohol-based hand sanitizer (ABHS) may be an effective alternative hygiene intervention where access to water is limited. There are no published data on the efficacy of either soap or ABHS-based interventions to reduce microbial contamination in agricultural settings. The goal of this study was to assess the ability of two soap-based (traditional or pumice) and two ABHS-based (label-use or two-step) hygiene interventions to reduce microbes (coliforms, Escherichia coli, and Enterococcus spp.) and soil (absorbance of hand rinsate at 600 nm [A600]) on farmworker hands after harvesting produce, compared with the results for a no-hand-hygiene control. With no hand hygiene, farmworker hands were soiled (median A600, 0.48) and had high concentrations of coliforms (geometric mean, 3.4 log CFU per hand) and Enterococcus spp. (geometric mean, 5.3 log CFU per hand) after 1 to 2 h of harvesting tomatoes. Differences in microbial loads in comparison to the loads in the control group varied by indicator organism and hygiene intervention (0 to 2.3 log CFU per hand). All interventions yielded lower concentrations of Enterococcus spp. and E. coli (P < 0.05), but not of coliforms, than were found in the control group. The two-step ABHS intervention led to significantly lower concentrations of coliforms and Enterococcus spp. than the pumice soap and label-use ABHS interventions (P < 0.05) and was the only intervention to yield significantly fewer samples with E. coli than were found in the control group (P < 0.05). All interventions removed soil from hands (P < 0.05), soap-based interventions more so than ABHS-based interventions (P < 0.05). ABHS-based interventions were

A threat to a virtual hand elicits motor cortex activation.

PubMed

González-Franco, Mar; Peck, Tabitha C; Rodríguez-Fornells, Antoni; Slater, Mel

2014-03-01

We report an experiment where participants observed an attack on their virtual body as experienced in an immersive virtual reality (IVR) system. Participants sat by a table with their right hand resting upon it. In IVR, they saw a virtual table that was registered with the real one, and they had a virtual body that substituted their real body seen from a first person perspective. The virtual right hand was collocated with their real right hand. Event-related brain potentials were recorded in two conditions, one where the participant's virtual hand was attacked with a knife and a control condition where the knife only struck the virtual table. Significantly greater P450 potentials were obtained in the attack condition confirming our expectations that participants had a strong illusion of the virtual hand being their own, which was also strongly supported by questionnaire responses. Higher levels of subjective virtual hand ownership correlated with larger P450 amplitudes. Mu-rhythm event-related desynchronization in the motor cortex and readiness potential (C3-C4) negativity were clearly observed when the virtual hand was threatened-as would be expected, if the real hand was threatened and the participant tried to avoid harm. Our results support the idea that event-related potentials may provide a promising non-subjective measure of virtual embodiment. They also support previous experiments on pain observation and are placed into context of similar experiments and studies of body perception and body ownership within cognitive neuroscience.

Participation in School-Related Activities That Require Hand Use for Children with and without Developmental Disabilities

ERIC Educational Resources Information Center

Cho, M.; Rodger, S.; Copley, J.; Chien, C. -W.

2018-01-01

Background: Children with developmental disabilities (DD) may experience limited participation in school activities. Little is known about whether school participation of children with DD who attend special schools is impacted. This study specifically focused on physical engagement in school-related activities that require hand use for the…

Mentorship for operational research capacity building: hands-on or hands-off?

PubMed

Harries, A D; Marais, B; Kool, B; Ram, S; Kumar, A M V; Gounder, S; Viney, K; Brostrom, R; Roseveare, C; Bissell, K; Reid, A J; Zachariah, R; Hill, P C

2014-06-21

Mentorship is a key feature of operational research training courses run by the International Union Against Tuberculosis and Lung Disease and Médecins Sans Frontières. During the recent South Pacific paper writing module, the faculty discussed 'hands-on' mentorship (direct technical assistance) vs. 'hands-off' mentorship (technical advice). This article explores the advantages and disadvantages of each approach. Our collective experience indicates that 'hands-on' mentorship is a valuable learning experience for the participant and a rewarding experience for the mentor. This approach increases the likelihood of successful course completion, including publishing a well written paper. However, mentors must allow participants to lead and take ownership of the paper, in keeping with a first author position.

Teaching genetics using hands-on models, problem solving, and inquiry-based methods

NASA Astrophysics Data System (ADS)

Hoppe, Stephanie Ann

Teaching genetics can be challenging because of the difficulty of the content and misconceptions students might hold. This thesis focused on using hands-on model activities, problem solving, and inquiry-based teaching/learning methods in order to increase student understanding in an introductory biology class in the area of genetics. Various activities using these three methods were implemented into the classes to address any misconceptions and increase student learning of the difficult concepts. The activities that were implemented were shown to be successful based on pre-post assessment score comparison. The students were assessed on the subjects of inheritance patterns, meiosis, and protein synthesis and demonstrated growth in all of the areas. It was found that hands-on models, problem solving, and inquiry-based activities were more successful in learning concepts in genetics and the students were more engaged than tradition styles of lecture.

Effect of gender and hand laterality on pain processing in human neonates.

PubMed

Ozawa, Mio; Kanda, Katsuya; Hirata, Michio; Kusakawa, Isao; Suzuki, Chieko

2011-01-01

Previous studies in adults have reported that handedness and gender can affect pain perception. However, it is currently unclear when these differences emerge in human development. Therefore, we examined prefrontal responses to pain stimulation among newborns during their first acute pain experience after birth. Forty newborns at 4-6 days postnatal age were observed during clinically required blood sampling while prefrontal activation was measured with near infrared spectroscopy. Blood sampling in this study was the first experience of a procedure involving skin breaking for these infants. We divided subjects into a right-hand stimulation group (n=21) and a left-hand stimulation group (n=19), depending on whether blood was sampled from the right or the left hand. A three-way analysis of variance (ANOVA) was conducted to examine the effects of several variables on the magnitude of the oxy-Hb value in response to pain stimulus, including stimulus side (right hand or left hand), gender (male or female), recording side (right prefrontal area or left prefrontal area) and interactions between these variables. The data revealed a significant effect of stimulus side (F (1, 72)=9.892, P=0.002), showing that the right-hand stimulation induced a greater prefrontal activation than the left-hand stimulation. No significant gender difference or interactions were found. Our findings suggest that hand laterality affects pain perception even in neonates. However, gender differences in pain perception did not appear to occur during the neonatal period. Further investigations using brain-imaging techniques are required to identify laterality- or gender-related differences in pain processing in humans. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

Hands-On Mathematics: Two Cases from Ancient Chinese Mathematics

ERIC Educational Resources Information Center

Wang, Youjun

2009-01-01

In modern mathematical teaching, it has become increasingly emphasized that mathematical knowledge should be taught by problem-solving, hands-on activities, and interactive learning experiences. Comparing the ideas of modern mathematical education with the development of ancient Chinese mathematics, we find that the history of mathematics in…

Acute immobilisation facilitates premotor preparatory activity for the non-restrained hand when facing grasp affordances.

PubMed

Kühn, Simone; Werner, Anika; Lindenberger, Ulman; Verrel, Julius

2014-05-15

Use and non-use of body parts during goal-directed action are major forces driving reorganisation of neural processing. We investigated changes in functional brain activity resulting from acute short-term immobilisation of the dominant right hand. Informed by the concept of object affordances, we predicted that the presence or absence of a limb restraint would influence the perception of graspable objects in a laterally specific way. Twenty-three participants underwent fMRI scanning during a passive object-viewing task before the intervention as well as with and without wearing an orthosis. The right dorsal premotor cortex and the left cerebellum were more strongly activated when the handle of an object was oriented towards the left hand while the right hand was immobilised compared with a situation where the hand was not immobilised. The cluster in the premotor cortex showing an interaction between condition (with restraint, without restraint) and stimulus action side (right vs. left) overlapped with the general task vs. baseline contrast prior to the intervention, confirming its functional significance for the task. These results show that acute immobilisation of the dominant right hand leads to rapid changes of the perceived affordance of objects. We conclude that changes in action requirements lead to almost instantaneous changes in functional activation patterns, which in turn may trigger structural cortical plasticity. Copyright © 2014. Published by Elsevier Inc.

Surface EMG in advanced hand prosthetics.

PubMed

Castellini, Claudio; van der Smagt, Patrick

2009-01-01

One of the major problems when dealing with highly dexterous, active hand prostheses is their control by the patient wearing them. With the advances in mechatronics, building prosthetic hands with multiple active degrees of freedom is realisable, but actively controlling the position and especially the exerted force of each finger cannot yet be done naturally. This paper deals with advanced robotic hand control via surface electromyography. Building upon recent results, we show that machine learning, together with a simple downsampling algorithm, can be effectively used to control on-line, in real time, finger position as well as finger force of a highly dexterous robotic hand. The system determines the type of grasp a human subject is willing to use, and the required amount of force involved, with a high degree of accuracy. This represents a remarkable improvement with respect to the state-of-the-art of feed-forward control of dexterous mechanical hands, and opens up a scenario in which amputees will be able to control hand prostheses in a much finer way than it has so far been possible.

Augmented robotic device for EVA hand manoeuvres

NASA Astrophysics Data System (ADS)

Matheson, Eloise; Brooker, Graham

2012-12-01

During extravehicular activities (EVAs), pressurised space suits can lead to difficulties in performing hand manoeuvres and fatigue. This is often the cause of EVAs being terminated early, or taking longer to complete. Assistive robotic gloves can be used to augment the natural motion of a human hand, meaning work can be carried out more efficiently with less stress to the astronaut. Lightweight and low profile solutions must be found in order for the assistive robotic glove to be easily integrated with a space suit pressure garment. Pneumatic muscle actuators combined with force sensors are one such solution. These actuators are extremely light, yet can output high forces using pressurised gases as the actuation drive. Their movement is omnidirectional, so when combined with a flexible exoskeleton that itself provides a degree of freedom of movement, individual fingers can be controlled during flexion and extension. This setup allows actuators and other hardware to be stored remotely on the user's body, resulting in the least possible mass being supported by the hand. Two prototype gloves have been developed at the University of Sydney; prototype I using a fibreglass exoskeleton to provide flexion force, and prototype II using torsion springs to achieve the same result. The gloves have been designed to increase the ease of human movements, rather than to add unnatural ability to the hand. A state space control algorithm has been developed to ensure that human initiated movements are recognised, and calibration methods have been implemented to accommodate the different characteristics of each wearer's hands. For this calibration technique, it was necessary to take into account the natural tremors of the human hand which may have otherwise initiated unexpected control signals. Prototype I was able to actuate the user's hand in 1 degree of freedom (DOF) from full flexion to partial extension, and prototype II actuated a user's finger in 2 DOF with forces achieved

Personal hand gel for improved hand hygiene compliance on the regional anesthesia team.

PubMed

Parks, Colby L; Schroeder, Kristopher M; Galgon, Richard E

2015-12-01

Hand hygiene reduces healthcare-associated infections, and several recent publications have examined hand hygiene in the perioperative period. Our institution's policy is to perform hand hygiene before and after patient contact. However, observation suggests poor compliance. This is a retrospective review of a quality improvement database showing the effect of personal gel dispensers on perioperative hand hygiene compliance on a regional anesthesia team. Healthcare providers assigned to the Acute Pain Service were observed for compliance with hand hygiene policy during a quality improvement initiative. Provider type and compliance were prospectively recorded in a database. Team members were then given a personal gel dispensing device and again observed for compliance. We have retrospectively reviewed this database to determine the effects of this intervention. Of the 307 encounters observed, 146 were prior to implementing personal gel dispensers. Compliance was 34%. Pre- and post-patient contact compliances were 23 and 43%, respectively. For 161 encounters after individual gel dispensers were provided, compliance was 63%. Pre- and post-patient contact compliances were 53 and 72%, respectively. Improvement in overall compliance from 34 to 63% was significant. On the Acute Pain Service, compliance with hand hygiene policy improves when individual sanitation gel dispensing devices are worn on the person.

Brain Activation Associated with Practiced Left Hand Mirror Writing

ERIC Educational Resources Information Center

Kushnir, T.; Arzouan, Y.; Karni, A.; Manor, D.

2013-01-01

Mirror writing occurs in healthy children, in various pathologies and occasionally in healthy adults. There are only scant experimental data on the underlying brain processes. Eight, right-handed, healthy young adults were scanned (BOLD-fMRI) before and after practicing left-hand mirror-writing (lh-MW) over seven sessions. They wrote dictated…

Hand controller commonality evaluation process

NASA Technical Reports Server (NTRS)

Stuart, Mark A.; Bierschwale, John M.; Wilmington, Robert P.; Adam, Susan C.; Diaz, Manuel F.; Jensen, Dean G.

1993-01-01

Hand controller selection for NASA's Orbiter and Space Station Freedom is an important area of human-telerobot interface design and evaluation. These input devices will control remotely operated systems that include large crane-like manipulators (e.g., Remote Manipulator System or RMS), smaller, more dexterous manipulators (e.g., Flight Telerobotic Servicer or FTS), and free flyers (e.g., Orbital Maneuvering Vehicle or OMV). Candidate hand controller configurations for these systems vary in many ways: shape, size, number of degrees-of-freedom (DOF), operating modes, provision of force reflection, range of movement, and 'naturalness' of use. Unresolved design implementation issues remain, including such topics as how the current Orbiter RMS rotational and translational rate hand controllers compare with the proposed Space Station Freedom hand controllers, the advantages that position hand controllers offer for these applications, and whether separate hand controller configurations are required for each application. Since previous studies contain little empirical hand controller task performance data, a controlled study is needed that tests Space Station Freedom candidate hand controllers during representative tasks. This study also needs to include anthropometric and biomechanical considerations.

Efficacy of alcohol-based hand sanitizer on hands soiled with dirt and cooking oil.

PubMed

Pickering, Amy J; Davis, Jennifer; Boehm, Alexandria B

2011-09-01

Handwashing education and promotion are well established as effective strategies to reduce diarrhea and respiratory illness in countries around the world. However, access to reliable water supplies has been identified as an important barrier to regular handwashing in low-income countries. Alcohol-based hand sanitizer (ABHS) is an effective hand hygiene method that does not require water, but its use is not currently recommended when hands are visibly soiled. This study evaluated the efficacy of ABHS on volunteers' hands artificially contaminated with Escherichia coli in the presence of dirt (soil from Tanzania) and cooking oil. ABHS reduced levels of E. coli by a mean of 2.33 log colony forming units (CFU) per clean hand, 2.32 log CFU per dirt-covered hand, and 2.13 log CFU per oil-coated hand. No significant difference in efficacy was detected between hands that were clean versus dirty or oily. ABHS may be an appropriate hand hygiene method for hands that are moderately soiled, and an attractive option for field settings in which access to water and soap is limited.

Hand, belt, pocket or bag: Practical activity tracking with mobile phones

PubMed Central

Antos, Stephen A.; Albert, Mark V.; Kording, Konrad P.

2013-01-01

For rehabilitation and diagnoses, an understanding of patient activities and movements is important. Modern smartphones have built in accelerometers which promise to enable quantifying minute-by-minute what patients do (e.g. walk or sit). Such a capability could inform recommendations of physical activities and improve medical diagnostics. However, a major problem is that during everyday life, we carry our phone in different ways, e.g. on our belt, in our pocket, in our hand, or in a bag. The recorded accelerations are not only affected by our activities but also by the phone’s location. Here we develop a method to solve this kind of problem, based on the intuition that activities change rarely, and phone locations change even less often. A Hidden Markov Model (HMM) tracks changes across both activities and locations, enabled by a static Support Vector Machine (SVM) classifier that probabilistically identifies activity-location pairs. We find that this approach improves tracking accuracy on healthy subjects as compared to a static classifier alone. The obtained method can be readily applied to patient populations. Our research enables the use of phones as activity tracking devices, without the need of previous approaches to instruct subjects to always carry the phone in the same location. PMID:24091138

Hand, belt, pocket or bag: Practical activity tracking with mobile phones.

PubMed

Antos, Stephen A; Albert, Mark V; Kording, Konrad P

2014-07-15

For rehabilitation and diagnoses, an understanding of patient activities and movements is important. Modern smartphones have built in accelerometers which promise to enable quantifying minute-by-minute what patients do (e.g. walk or sit). Such a capability could inform recommendations of physical activities and improve medical diagnostics. However, a major problem is that during everyday life, we carry our phone in different ways, e.g. on our belt, in our pocket, in our hand, or in a bag. The recorded accelerations are not only affected by our activities but also by the phone's location. Here we develop a method to solve this kind of problem, based on the intuition that activities change rarely, and phone locations change even less often. A hidden Markov model (HMM) tracks changes across both activities and locations, enabled by a static support vector machine (SVM) classifier that probabilistically identifies activity-location pairs. We find that this approach improves tracking accuracy on healthy subjects as compared to a static classifier alone. The obtained method can be readily applied to patient populations. Our research enables the use of phones as activity tracking devices, without the need of previous approaches to instruct subjects to always carry the phone in the same location. Copyright © 2013 Elsevier B.V. All rights reserved.

Effects of a warm hand bath on the blood flow in the shoulder, skin and deep body temperature, autonomic nervous activity, and subjective comfort in healthy women: An experimental cross-over trial.

PubMed

Kudo, Yukiko; Sasaki, Makiko; Kikuchi, Yukiko; Sugiyama, Reiko; Hasebe, Makiko; Ishii, Noriko

2018-06-19

The present study was conducted in order to clarify the effects of a warm hand bath at 40°C for 10 min on the blood flow in the shoulder, skin and deep body temperature, autonomic nervous activity, and subjective comfort in healthy women. The study's participants were 40 healthy adult women who were randomly assigned to either a structured hand bath first and no hand bath second (Group A) or to no hand bath first and a hand bath second (Group B). The blood flow in the shoulder, skin and deep body temperature, autonomic nervous activity, and subjective comfort then were recorded in all the participants. A repeated-measures ANOVA revealed no significant difference in the blood flow in the right shoulder or deep body temperature between groups. The skin temperature of the hands, forearms, and arms was significantly increased, but not of the face and upper back. The skin temperature of the forearms was maintained at 0.5°C-1°C higher for 30 min in the hand bath group, compared with the no hand bath group. The hand bath group had a significantly higher heart rate while bathing and a significantly lower parasympathetic nerve activity level during bathing. No significant difference was seen in the sympathetic activity level between groups. The hand bath group had a significantly higher subjective comfort level. Hand baths can improve the level of subjective comfort and increase the heart rate and might affect autonomic nervous activity. The skin temperature of the forearms was maintained for 30 min in the hand bath group. © 2018 Japan Academy of Nursing Science.

Teachers' Perspectives on Online Virtual Labs vs. Hands-On Labs in High School Science

NASA Astrophysics Data System (ADS)

Bohr, Teresa M.

This study of online science teachers' opinions addressed the use of virtual labs in online courses. A growing number of schools use virtual labs that must meet mandated laboratory standards to ensure they provide learning experiences comparable to hands-on labs, which are an integral part of science curricula. The purpose of this qualitative case study was to examine teachers' perceptions of the quality and effectiveness of high school virtual labs. The theoretical foundation was constructivism, as labs provide student-centered activities for problem solving, inquiry, and exploration of phenomena. The research questions focused on experienced teachers' perceptions of the quality of virtual vs. hands-on labs. Data were collected through survey questions derived from the lab objectives of The Next Generation Science Standards . Eighteen teachers rated the degree of importance of each objective and also rated how they felt virtual labs met these objectives; these ratings were reported using descriptive statistics. Responses to open-ended questions were few and served to illustrate the numerical results. Many teachers stated that virtual labs are valuable supplements but could not completely replace hands-on experiences. Studies on the quality and effectiveness of high school virtual labs are limited despite widespread use. Comprehensive studies will ensure that online students have equal access to quality labs. School districts need to define lab requirements, and colleges need to specify the lab experience they require. This study has potential to inspire positive social change by assisting science educators, including those in the local school district, in evaluating and selecting courseware designed to promote higher order thinking skills, real-world problem solving, and development of strong inquiry skills, thereby improving science instruction for all high school students.

Hands-on experiences with buoyant-less water

NASA Astrophysics Data System (ADS)

Sliško, Josip; Planinšič, Gorazd

2010-05-01

The phenomenon of weightlessness is known to students thanks to videos of amazing things astronauts do in spaceships orbiting the Earth. In this article we propose two hands-on activities which give students opportunities to infer by themselves the absence of buoyant force in a gravity accelerated system. The system is a free-falling or vertically tossed bottle filled with water with a small, inflated balloon attached to the bottom by a spring. Practical hints on how to make efficient demonstration experiments are added.

Effect of muscle relaxation in the foot on simultaneous muscle contraction in the contralateral hand.

PubMed

Kato, Kouki; Kanosue, Kazuyuki

2016-10-28

We investigated the effects of foot muscle relaxation and contraction on muscle activities in the hand on both ipsilateral and contralateral sides. The subjects sat in an armchair with hands in the pronated position. They were able to freely move their right/left hand and foot. They performed three tasks for both ipsilateral (right hand and right foot) and contralateral limb coordination (left hand and right foot for a total of six tasks). These tasks involved: (1) wrist extension from a flexed (resting) position, (2) wrist extension with simultaneous ankle dorsiflexion from a plantarflexed (resting) position, and (3) wrist extension with simultaneous ankle relaxation from a dorsiflexed position. The subjects performed each task as fast as possible after hearing the start signal. Reaction time for the wrist extensor contraction (i.e. the degree to which it preceded the motor reaction time), as observed in electromyography (EMG), became longer when it was concurrently done with relaxation of the ankle dorsiflexor. Also, the magnitude of EMG activity became smaller, as compared with activity when wrist extensor contraction was done alone or with contraction of the ankle dorsiflexor. These effects were observed not only for the ipsilateral hand, but also for the contralateral hand. Our findings suggest that muscle relaxation in one limb interferes with muscle contraction in both the ipsilateral and contralateral limbs. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Effect of electronic real-time prompting on hand hygiene behaviors in health care workers.

PubMed

Pong, Steven; Holliday, Pamela; Fernie, Geoff

2018-03-02

Poor hand hygiene by health care workers is a major cause of nosocomial infections. This research evaluated the ability of an electronic monitoring system with real-time prompting capability to change hand hygiene behaviors. Handwashing activity was measured by counting dispenser activations on a single nursing unit before, during, and after installation of the system. The effect of changing the prompt duration on hand hygiene performance was determined by a cluster-randomized trial on 3 nursing units with 1 acting as control. Sustainability of performance and participation was observed on 4 nursing units over a year. All staff were eligible to participate. Between June 2015 and December 2016, a total of 459,376 hand hygiene opportunities and 330,740 handwashing events from 511 staff members were recorded. Dispenser activation counts were significantly influenced by use of the system (χ 2 [3] = 75.76; P < .0001). Hand hygiene performance dropped from 62.61% to 24.94% (odds ratio, 0.36; 95% confidence interval, 0.34-0.38) when the prompting feature was removed. Staff participation had a negative trajectory of -0.72% (P < .001), whereas change in average performance was -0.18% (P < .001) per week for the year. Use of electronic monitoring with real-time prompts of 20 seconds' duration nearly doubles handwashing activity and causes handwashing to occur sooner after entering a patient room. These improvements are sustainable over a year. Copyright © 2018 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Solar Collector Design Optimization: A Hands-on Project Case Study

ERIC Educational Resources Information Center

Birnie, Dunbar P., III; Kaz, David M.; Berman, Elena A.

2012-01-01

A solar power collector optimization design project has been developed for use in undergraduate classrooms and/or laboratories. The design optimization depends on understanding the current-voltage characteristics of the starting photovoltaic cells as well as how the cell's electrical response changes with increased light illumination. Students…

Grasping with the eyes of your hands: hapsis and vision modulate hand preference.

PubMed

Stone, Kayla D; Gonzalez, Claudia L R

2014-02-01

Right-hand preference has been demonstrated for visually guided reaching and grasping. Grasping, however, requires the integration of both visual and haptic cues. To what extent does vision influence hand preference for grasping? Is there a hand preference for haptically guided grasping? Two experiments were designed to address these questions. In Experiment 1, individuals were tested in a reaching-to-grasp task with vision (sighted condition) and with hapsis (blindfolded condition). Participants were asked to put together 3D models using building blocks scattered on a tabletop. The models were simple, composed of ten blocks of three different shapes. Starting condition (Vision-First or Hapsis-First) was counterbalanced among participants. Right-hand preference was greater in visually guided grasping but only in the Vision-First group. Participants who initially built the models while blindfolded (Hapsis-First group) used their right hand significantly less for the visually guided portion of the task. To investigate whether grasping using hapsis modifies subsequent hand preference, participants received an additional haptic experience in a follow-up experiment. While blindfolded, participants manipulated the blocks in a container for 5 min prior to the task. This additional experience did not affect right-hand use on visually guided grasping but had a robust effect on haptically guided grasping. Together, the results demonstrate first that hand preference for grasping is influenced by both vision and hapsis, and second, they highlight how flexible this preference could be when modulated by hapsis.

Effect of the Intelligent Health Messenger Box on health care professionals' knowledge, attitudes, and practice related to hand hygiene and hand bacteria counts.

PubMed

Saffari, Mohsen; Ghanizadeh, Ghader; Fattahipour, Rasoul; Khalaji, Kazem; Pakpour, Amir H; Koenig, Harold G

2016-12-01

We assessed the effectiveness of the Intelligent Health Messenger Box in promoting hand hygiene using a quasiexperimental design. Knowledge, attitudes, and self-reported practices related to hand hygiene as well as hand bacteria counts and amount of liquid soap used were measured. The intervention involved broadcasting preventive audio messages. All outcomes showed significant change after the intervention compared with before. The Intelligent Health Messenger Box can serve as a practical way to improve hand hygiene. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Hands-On Experiences in Deploying Cost-Effective Ambient-Assisted Living Systems

PubMed Central

Dasios, Athanasios; Gavalas, Damianos; Pantziou, Grammati; Konstantopoulos, Charalampos

2015-01-01

Older adults’ preferences to remain independent in their own homes along with the high costs of nursing home care have motivated the development of Ambient Assisted Living (AAL) technologies which aim at improving the safety, health conditions and wellness of the elderly. This paper reports hands-on experiences in designing, implementing and operating UbiCare, an AAL based prototype system for elderly home care monitoring. The monitoring is based on the recording of environmental parameters like temperature and light intensity as well as micro-level incidents which allows one to infer daily activities like moving, sitting, sleeping, usage of electrical appliances and plumbing components. The prototype is built upon inexpensive, off-the-shelf hardware (e.g., various sensors, Arduino microcontrollers, ZigBee-compatible wireless communication modules) and license-free software, thereby ensuring low system deployment costs. The network comprises nodes placed in a house’s main rooms or mounted on furniture, one wearable node, one actuator node and a centralized processing element (coordinator). Upon detecting significant deviations from the ordinary activity patterns of individuals and/or sudden falls, the system issues automated alarms which may be forwarded to authorized caregivers via a variety of communication channels. Furthermore, measured environmental parameters and activity incidents may be monitored through standard web interfaces. PMID:26094631

Hands-On Experiences in Deploying Cost-Effective Ambient-Assisted Living Systems.

PubMed

Dasios, Athanasios; Gavalas, Damianos; Pantziou, Grammati; Konstantopoulos, Charalampos

2015-06-18

Older adults' preferences to remain independent in their own homes along with the high costs of nursing home care have motivated the development of Ambient Assisted Living (AAL) technologies which aim at improving the safety, health conditions and wellness of the elderly. This paper reports hands-on experiences in designing, implementing and operating UbiCare, an AAL based prototype system for elderly home care monitoring. The monitoring is based on the recording of environmental parameters like temperature and light intensity as well as micro-level incidents which allows one to infer daily activities like moving, sitting, sleeping, usage of electrical appliances and plumbing components. The prototype is built upon inexpensive, off-the-shelf hardware (e.g., various sensors, Arduino microcontrollers, ZigBee-compatible wireless communication modules) and license-free software, thereby ensuring low system deployment costs. The network comprises nodes placed in a house's main rooms or mounted on furniture, one wearable node, one actuator node and a centralized processing element (coordinator). Upon detecting significant deviations from the ordinary activity patterns of individuals and/or sudden falls, the system issues automated alarms which may be forwarded to authorized caregivers via a variety of communication channels. Furthermore, measured environmental parameters and activity incidents may be monitored through standard web interfaces.

Cultural Influences in Women-Friendly Labor-Saving Hand Tool Designs: The Milk Churner Case.

PubMed

Kisaalita, William S; Katimbo, Abia; Sempiira, Edison J; Mugisa, Dana J

2016-02-01

The aim of this study was to highlight the importance of culture in sustainable, labor-saving solutions design for women in low-resource settings. One of the reasons behind the gender asset gap among Sub-Saharan African women is the higher labor burden these women face, making it difficult for them to produce for the home and markets. Hand tools are the simplest form and therefore the best first step to address this problem. But designing women-friendly (sustainable) hand tools calls for better understanding of the low-resource settings where these women reside. A milk churner was redesigned using a human-centered (participatory) approach with groups of women from two dominant ethnolinguistic groups of Bantu and Nilotic of Uganda, and its usability was tested. The churner reduced labor up to eightfold and has potential to expand the range of uses to include children and husbands due to its simplicity. Also, the churner significantly reduced undesirable health effects, like pain in knee joints. Based on the experience with the churner, a six-item "survival guide" is proposed to complement human-centered design guiding principles for facilitating the generation of solutions in low-resource settings. By paying great attention to culture in relation to human factors, a labor-reducing churner has been successfully introduced among Ugandan women. The ultimate goal is to make the churner available to female smallholder dairy-farming households throughout Sub-Saharan Africa. This study provides a survival guide for generating solutions to problems from low-resource settings. © 2016, Human Factors and Ergonomics Society.

3D Printed Robotic Hand

NASA Technical Reports Server (NTRS)

Pizarro, Yaritzmar Rosario; Schuler, Jason M.; Lippitt, Thomas C.

2013-01-01

Dexterous robotic hands are changing the way robots and humans interact and use common tools. Unfortunately, the complexity of the joints and actuations drive up the manufacturing cost. Some cutting edge and commercially available rapid prototyping machines now have the ability to print multiple materials and even combine these materials in the same job. A 3D model of a robotic hand was designed using Creo Parametric 2.0. Combining "hard" and "soft" materials, the model was printed on the Object Connex350 3D printer with the purpose of resembling as much as possible the human appearance and mobility of a real hand while needing no assembly. After printing the prototype, strings where installed as actuators to test mobility. Based on printing materials, the manufacturing cost of the hand was $167, significantly lower than other robotic hands without the actuators since they have more complex assembly processes.

Antimicrobial activity predictors benchmarking analysis using shuffled and designed synthetic peptides.

PubMed

Porto, William F; Pires, Állan S; Franco, Octavio L

2017-08-07

The antimicrobial activity prediction tools aim to help the novel antimicrobial peptides (AMP) sequences discovery, utilizing machine learning methods. Such approaches have gained increasing importance in the generation of novel synthetic peptides by means of rational design techniques. This study focused on predictive ability of such approaches to determine the antimicrobial sequence activities, which were previously characterized at the protein level by in vitro studies. Using four web servers and one standalone software, we evaluated 78 sequences generated by the so-called linguistic model, being 40 designed and 38 shuffled sequences, with ∼60 and ∼25% of identity to AMPs, respectively. The ab initio molecular modelling of such sequences indicated that the structure does not affect the predictions, as both sets present similar structures. Overall, the systems failed on predicting shuffled versions of designed peptides, as they are identical in AMPs composition, which implies in accuracies below 30%. The prediction accuracy is negatively affected by the low specificity of all systems here evaluated, as they, on the other hand, reached 100% of sensitivity. Our results suggest that complementary approaches with high specificity, not necessarily high accuracy, should be developed to be used together with the current systems, overcoming their limitations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effects of neoprene wrist/hand splints on handwriting for students with joint hypermobility syndrome: a single system design study.

PubMed

Frohlich, Lauren; Wesley, Alison; Wallen, Margaret; Bundy, Anita

2012-08-01

Pain associated with hypermobility of wrist and hand joints can contribute to decreased handwriting output. This study examined the effectiveness of a neoprene wrist/hand splint in reducing pain and increasing handwriting speed and endurance for students with joint hypermobility syndrome. Multiple baseline, single system design (SSD) methodology was used. Four ninth grade students with handwriting difficulties because of joint hypermobility syndrome participated in this study. Visual and statistical (two standard deviation band method) analyses indicated a significant decrease in handwriting speed when using the splint for three out of four participants. No significant change in pain or endurance was noted during intervention. There was a significant decrease in pain following withdrawal of the splint for three participants. Evidence from this study does not support use of this particular splint for decreasing pain and increasing handwriting speed and endurance for ninth grade students with joint hypermobility syndrome.

A Hands-On Approach to Maglev for Gifted Students.

ERIC Educational Resources Information Center

Budd, Raymond T.

2003-01-01

This article discusses how Magnetic Levitation (Maglev) can be taught to gifted students in grades 4-9 using hands-on activities that align to the National Science Standards. Principles of magnetic levitation, advantages of magnetic levitation, construction of a Maglev project, testing and evaluation of vehicles, and presentation of the unit are…

AUTOMATIC HAND COUNTER

DOEpatents

Mann J.R.; Wainwright, A.E.

1963-06-11

An automatic, personnel-operated, alpha-particle hand monitor is described which functions as a qualitative instrument to indicate to the person using it whether his hands are cold'' or hot.'' The monitor is activated by a push button and includes several capacitor-triggered thyratron tubes. Upon release of the push button, the monitor starts the counting of the radiation present on the hands of the person. If the count of the radiation exceeds a predetermined level within a predetermined time, then a capacitor will trigger a first thyratron tube to light a hot'' lamp. If, however, the count is below such level during this time period, another capacitor will fire a second thyratron to light a safe'' lamp. (AEC)

Design of a robotic device for assessment and rehabilitation of hand sensory function.

PubMed

Lambercy, Olivier; Robles, Alejandro Juárez; Kim, Yeongmi; Gassert, Roger

2011-01-01

This paper presents the design and implementation of the Robotic Sensory Trainer, a robotic interface for assessment and therapy of hand sensory function. The device can provide three types of well controlled stimuli: (i) angular displacement at the metacarpophalangeal (MCP) joint using a remote-center-of-motion double-parallelogram structure, (ii) vibration stimuli at the fingertip, proximal phalange and palm, and (iii) pressure at the fingertip, while recording position, interaction force and feedback from the user over a touch screen. These stimuli offer a novel platform to investigate sensory perception in healthy subjects and patients with sensory impairments, with the potential to assess deficits and actively train detection of specific sensory cues in a standardized manner. A preliminary study with eight healthy subjects demonstrates the feasibility of using the Robotic Sensory Trainer to assess the sensory perception threshold in MCP angular position. An average just noticeable difference (JND) in the MCP joint angle of 2.46° (14.47%) was found, which is in agreement with previous perception studies. © 2011 IEEE

The evolution of functional hand replacement: From iron prostheses to hand transplantation

PubMed Central

Zuo, Kevin J; Olson, Jaret L

2014-01-01

The hand is an integral component of the human body, with an incredible spectrum of functionality. In addition to possessing gross and fine motor capabilities essential for physical survival, the hand is fundamental to social conventions, enabling greeting, grooming, artistic expression and syntactical communication. The loss of one or both hands is, thus, a devastating experience, requiring significant psychological support and physical rehabilitation. The majority of hand amputations occur in working-age males, most commonly as a result of work-related trauma or as casualties sustained during combat. For millennia, humans have used state-of-the-art technology to design clever devices to facilitate the reintegration of hand amputees into society. The present article provides a historical overview of the progress in replacing a missing hand, from early iron hands intended primarily for use in battle, to today’s standard body-powered and myoelectric prostheses, to revolutionary advancements in the restoration of sensorimotor control with targeted reinnervation and hand transplantation. PMID:25152647

[Amplitude Changes of Low Frequency Fluctuation in Brain Spontaneous Nervous Activities Induced by Needling at Hand Taiyin Lung Channel].

PubMed

Zhou, You-long; Su, Cheng-guo; Liu, Shou-fang; Jin, Xiang-yu; Duan, Yan-li; Chen, Xiao-yan; Zhao, Shu-hua; Wang, Quan-liang; Dang, Chang-lin

2016-05-01

To observe amplitude changes of low frequency fluctuation in brain spontaneous nervous activities induced by needling at Hand Taiyin Lung Channel, and to preliminarily explore the possible brain function network of Hand Taiyin Lung Channel. By using functional magnetic resonance imaging (fMRI), 16 healthy volunteers underwent resting-state scanning (R1) and scanning with retained acupuncture at Hand Taiyin Lung Channel (acupuncture, AP). Data of fMRI collected were statistically calculated using amplitude of low frequency fluctuations (ALFF). Under R1 significantly enhanced ALFF occurred in right precuneus, left inferior parietal lobule, bilateral superior temporal gyrus, bilateral middle frontal gyrus, left superior frontal gyrus, left inferior frontal gyrus, left medial frontal gyrus. Under AP significantly enhanced ALFF occurred in right precuneus, bilateral superior frontal gyrus, cerebellum, bilateral middle frontal gyrus, right medial frontal gyrus, and so on. Compared with R1, needing at Hand Taiyin Lung Channel could significantly enhance ALFF in right gyrus subcallosum and right inferior frontal gyrus. Significant decreased ALFF appeared in right postcentral gyrus, left precuneus, left superior temporal gyrus, left middle temporal gyrus, and so on. Needing at Hand Taiyin Lung Channel could significantly change fixed activities of cerebral cortex, especially in right subcallosal gyrus, right inferior frontal gyrus, and so on.

Thinking with Hands-On Activities

ERIC Educational Resources Information Center

Conover, Patricia Ross

2009-01-01

The goal for library media specialists and teachers is to lead students to use technology to communicate, in a powerful and meaningful way, and to creatively display what they have learned. With these ideas in mind, this article details several projects using Microsoft PowerPoint XP. The activities, with simplified instructions, can be adapted to…

Using Polymer Semiconductors and a 3-in-1 Plastic Electronics STEM Education Kit to Engage Students in Hands-On Polymer Inquiry Activities

ERIC Educational Resources Information Center

Enlow, Jessica L.; Marin, Dawn M.; Walter, Michael G.

2017-01-01

To improve polymer education for 9-12 and undergraduate students, a plastic electronics laboratory kit using polymer semiconductors has been developed. The three-module kit and curriculum use polymer semiconductors to provide hands-on inquiry activities with overlapping themes of electrical conductivity, light emission, and light-harvesting solar…

Imagined Hand Clenching Force and Speed Modulate Brain Activity and Are Classified by NIRS Combined With EEG.

PubMed

Fu, Yunfa; Xiong, Xin; Jiang, Changhao; Xu, Baolei; Li, Yongcheng; Li, Hongyi

2017-09-01

Simultaneous acquisition of brain activity signals from the sensorimotor area using NIRS combined with EEG, imagined hand clenching force and speed modulation of brain activity, as well as 6-class classification of these imagined motor parameters by NIRS-EEG were explored. Near infrared probes were aligned with C3 and C4, and EEG electrodes were placed midway between the NIRS probes. NIRS and EEG signals were acquired from six healthy subjects during six imagined hand clenching force and speed tasks involving the right hand. The results showed that NIRS combined with EEG is effective for simultaneously measuring brain activity of the sensorimotor area. The study also showed that in the duration of (0, 10) s for imagined force and speed of hand clenching, HbO first exhibited a negative variation trend, which was followed by a negative peak. After the negative peak, it exhibited a positive variation trend with a positive peak about 6-8 s after termination of imagined movement. During (-2, 1) s, the EEG may have indicated neural processing during the preparation, execution, and monitoring of a given imagined force and speed of hand clenching. The instantaneous phase, frequency, and amplitude feature of the EEG were calculated by Hilbert transform; HbO and the difference between HbO and Hb concentrations were extracted. The features of NIRS and EEG were combined to classify three levels of imagined force [at 20/50/80% MVGF (maximum voluntary grip force)] and speed (at 0.5/1/2 Hz) of hand clenching by SVM. The average classification accuracy of the NIRS-EEG fusion feature was 0.74 ± 0.02. These results may provide increased control commands of force and speed for a brain-controlled robot based on NIRS-EEG.

Active range of motion outcomes after reconstruction of burned wrist and hand deformities.

PubMed

Afifi, Ahmed M; Mahboub, Tarek A; Ibrahim Fouad, Amr; Azari, Kodi; Khalil, Haitham H; McCarthy, James E

2016-06-01

This works aim is to evaluate the efficacy of skin grafts and flaps in reconstruction of post-burn hand and wrist deformities. A prospective study of 57 burn contractures of the wrist and dorsum of the hand was performed. Flaps were used only if there was a non-vascularized structure after contracture release, otherwise a skin graft was used. Active range of motion (ROM) was used to assess hand function. The extension deformity cohort uniformly underwent skin graft following contracture release with a mean improvement of 71 degrees (p<0.0001). The flexion deformity cohort was treated with either skin grafts (8 patients) or flaps (9 patients) with a mean improvement of 44 degrees (p<0.0001). Skin grafts suffice for dorsal hand contractures to restore functional wrist ROM. For flexion contractures, flaps were more likely for contractures >6 months. Early release of burn contracture is advisable to avoid deep structure contracture. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Impact of body posture on laterality judgement and explicit recognition tasks performed on self and others' hands.

PubMed

Conson, Massimiliano; Errico, Domenico; Mazzarella, Elisabetta; De Bellis, Francesco; Grossi, Dario; Trojano, Luigi

2015-04-01

Judgments on laterality of hand stimuli are faster and more accurate when dealing with one's own than others' hand, i.e. the self-advantage. This advantage seems to be related to activation of a sensorimotor mechanism while implicitly processing one's own hands, but not during explicit one's own hand recognition. Here, we specifically tested the influence of proprioceptive information on the self-hand advantage by manipulating participants' body posture during self and others' hand processing. In Experiment 1, right-handed healthy participants judged laterality of either self or others' hands, whereas in Experiment 2, an explicit recognition of one's own hands was required. In both experiments, the participants performed the task while holding their left or right arm flexed with their hand in direct contact with their chest ("flexed self-touch posture") or with their hand placed on a wooden smooth surface in correspondence with their chest ("flexed proprioceptive-only posture"). In an "extended control posture", both arms were extended and in contact with thighs. In Experiment 1 (hand laterality judgment), we confirmed the self-advantage and demonstrated that it was enhanced when the subjects judged left-hand stimuli at 270° orientation while keeping their left arm in the flexed proprioceptive-only posture. In Experiment 2 (explicit self-hand recognition), instead, we found an advantage for others' hand ("self-disadvantage") independently from posture manipulation. Thus, position-related proprioceptive information from left non-dominant arm can enhance sensorimotor one's own body representation selectively favouring implicit self-hands processing.

Hand synergies: Integration of robotics and neuroscience for understanding the control of biological and artificial hands

PubMed Central

Santello, Marco; Bianchi, Matteo; Gabiccini, Marco; Ricciardi, Emiliano; Salvietti, Gionata; Prattichizzo, Domenico; Ernst, Marc; Moscatelli, Alessandro; Jörntell, Henrik; Kappers, Astrid M.L.; Kyriakopoulos, Kostas; Albu-Schäffer, Alin; Castellini, Claudio; Bicchi, Antonio

2017-01-01

The term ‘synergy’ – from the Greek synergia – means ‘working together’. The concept of multiple elements working together towards a common goal has been extensively used in neuroscience to develop theoretical frameworks, experimental approaches, and analytical techniques to understand neural control of movement, and for applications for neuro-rehabilitation. In the past decade, roboticists have successfully applied the framework of synergies to create novel design and control concepts for artificial hands, i.e., robotic hands and prostheses. At the same time, robotic research on the sensorimotor integration underlying the control and sensing of artificial hands has inspired new research approaches in neuroscience, and has provided useful instruments for novel experiments. The ambitious goal of integrating expertise and research approaches in robotics and neuroscience to study the properties and applications of the concept of synergies is generating a number of multidisciplinary cooperative projects, among which the recently finished 4-year European project “The Hand Embodied” (THE). This paper reviews the main insights provided by this framework. Specifically, we provide an overview of neuroscientific bases of hand synergies and introduce how robotics has leveraged the insights from neuroscience for innovative design in hardware and controllers for biomedical engineering applications, including myoelectric hand prostheses, devices for haptics research, and wearable sensing of human hand kinematics. The review also emphasizes how this multidisciplinary collaboration has generated new ways to conceptualize a synergy-based approach for robotics, and provides guidelines and principles for analyzing human behavior and synthesizing artificial robotic systems based on a theory of synergies. PMID:26923030

Hand synergies: Integration of robotics and neuroscience for understanding the control of biological and artificial hands.

PubMed

Santello, Marco; Bianchi, Matteo; Gabiccini, Marco; Ricciardi, Emiliano; Salvietti, Gionata; Prattichizzo, Domenico; Ernst, Marc; Moscatelli, Alessandro; Jörntell, Henrik; Kappers, Astrid M L; Kyriakopoulos, Kostas; Albu-Schäffer, Alin; Castellini, Claudio; Bicchi, Antonio

2016-07-01

The term 'synergy' - from the Greek synergia - means 'working together'. The concept of multiple elements working together towards a common goal has been extensively used in neuroscience to develop theoretical frameworks, experimental approaches, and analytical techniques to understand neural control of movement, and for applications for neuro-rehabilitation. In the past decade, roboticists have successfully applied the framework of synergies to create novel design and control concepts for artificial hands, i.e., robotic hands and prostheses. At the same time, robotic research on the sensorimotor integration underlying the control and sensing of artificial hands has inspired new research approaches in neuroscience, and has provided useful instruments for novel experiments. The ambitious goal of integrating expertise and research approaches in robotics and neuroscience to study the properties and applications of the concept of synergies is generating a number of multidisciplinary cooperative projects, among which the recently finished 4-year European project "The Hand Embodied" (THE). This paper reviews the main insights provided by this framework. Specifically, we provide an overview of neuroscientific bases of hand synergies and introduce how robotics has leveraged the insights from neuroscience for innovative design in hardware and controllers for biomedical engineering applications, including myoelectric hand prostheses, devices for haptics research, and wearable sensing of human hand kinematics. The review also emphasizes how this multidisciplinary collaboration has generated new ways to conceptualize a synergy-based approach for robotics, and provides guidelines and principles for analyzing human behavior and synthesizing artificial robotic systems based on a theory of synergies. Copyright © 2016 Elsevier B.V. All rights reserved.

Hand synergies: Integration of robotics and neuroscience for understanding the control of biological and artificial hands

NASA Astrophysics Data System (ADS)

Santello, Marco; Bianchi, Matteo; Gabiccini, Marco; Ricciardi, Emiliano; Salvietti, Gionata; Prattichizzo, Domenico; Ernst, Marc; Moscatelli, Alessandro; Jörntell, Henrik; Kappers, Astrid M. L.; Kyriakopoulos, Kostas; Albu-Schäffer, Alin; Castellini, Claudio; Bicchi, Antonio

2016-07-01

The term 'synergy' - from the Greek synergia - means 'working together'. The concept of multiple elements working together towards a common goal has been extensively used in neuroscience to develop theoretical frameworks, experimental approaches, and analytical techniques to understand neural control of movement, and for applications for neuro-rehabilitation. In the past decade, roboticists have successfully applied the framework of synergies to create novel design and control concepts for artificial hands, i.e., robotic hands and prostheses. At the same time, robotic research on the sensorimotor integration underlying the control and sensing of artificial hands has inspired new research approaches in neuroscience, and has provided useful instruments for novel experiments. The ambitious goal of integrating expertise and research approaches in robotics and neuroscience to study the properties and applications of the concept of synergies is generating a number of multidisciplinary cooperative projects, among which the recently finished 4-year European project ;The Hand Embodied; (THE). This paper reviews the main insights provided by this framework. Specifically, we provide an overview of neuroscientific bases of hand synergies and introduce how robotics has leveraged the insights from neuroscience for innovative design in hardware and controllers for biomedical engineering applications, including myoelectric hand prostheses, devices for haptics research, and wearable sensing of human hand kinematics. The review also emphasizes how this multidisciplinary collaboration has generated new ways to conceptualize a synergy-based approach for robotics, and provides guidelines and principles for analyzing human behavior and synthesizing artificial robotic systems based on a theory of synergies.

Update on the use of alitretinoin in treating chronic hand eczema.

PubMed

Ghasri, Pedram; Scheinfeld, Noah

2010-04-19

Chronic hand eczema is a debilitating dermatological condition with significant economic, social, and functional impacts. To date, conventional treatments such as topical corticosteroids, phototherapy, and systemic immunosuppressants have yielded disappointing results, owing to either a lack of efficacy or significant adverse events. Oral alitretinoin (9-cis-retinoic acid) is a unique panagonist retinoid with immunomodulatory and anti-inflammatory activity that has emerged as a novel treatment for chronic hand eczema. Several large-scale clinical studies have demonstrated oral alitretinoin's high efficacy rate of 28% to 89%, its safe tolerability profile, and its positive impact on quality of life, validating it as a therapeutic option for patients with severe chronic hand eczema refractory to standard treatment.

Update on the use of alitretinoin in treating chronic hand eczema

PubMed Central

Ghasri, Pedram; Scheinfeld, Noah

2010-01-01

Chronic hand eczema is a debilitating dermatological condition with significant economic, social, and functional impacts. To date, conventional treatments such as topical corticosteroids, phototherapy, and systemic immunosuppressants have yielded disappointing results, owing to either a lack of efficacy or significant adverse events. Oral alitretinoin (9-cis-retinoic acid) is a unique panagonist retinoid with immunomodulatory and anti-inflammatory activity that has emerged as a novel treatment for chronic hand eczema. Several large-scale clinical studies have demonstrated oral alitretinoin’s high efficacy rate of 28% to 89%, its safe tolerability profile, and its positive impact on quality of life, validating it as a therapeutic option for patients with severe chronic hand eczema refractory to standard treatment. PMID:21437060

Physical activity, sleep pattern and energy expenditure in double-handed offshore sailing.

PubMed

Galvani, C; Ardigò, L P; Alberti, M; Daniele, F; Capelli, C

2015-12-01

The aim of the present study was to quantify total energy expenditure, activity energy expenditure and time spent at three levels of physical activity (low, moderate, high intensity) in four two-person crews during a 500-mile double-handed sailing regatta. Physical activity intensity and energy expenditure were assessed during a 500-nautical-mile double-handed offshore competition in eight male sailors (46.3±3.4 years; 180±13 cm; 85.4±12.5 kg). During the whole regatta, they wore an activity monitor that estimated energy expenditure and minutes spent at each level of intensity (sedentary, <1.5 METs; light physical activity, 1.5-2.9 METs; moderate physical activity, 3.0-6.0 METs; vigorous physical activity, >6.0 METs). The sailors spent longer periods (P<0.0001) of time in sedentary (823±193 min/day) and light physical activities (516±177 min/day) than in moderate (95±34 min/day) or vigorous (6±4 min/day) physical activities. They slept 5 times per day (±1.4) for 36 min (±9) in each sleeping period. The total energy expenditure was 14.26±1.89 MJ/day and the activity energy expenditure was 5.06±1.42 MJ/day. Activity energy expenditure was significantly correlated with total sleep time, boat speed, and distance covered each day (P<0.05). CONCLUSION;:The high total energy expenditure was more likely a consequence of the short and rare periods of sleep during the competition rather than of the bouts of moderate and vigorous physical activities.

Effects of two-handed task training on upper limb function of chronic hemiplegic patients after stroke

PubMed Central

Yang, Byung Il; Song, Bo Kyoung; Joung, Sang Mi

2017-01-01

[Purpose] The purpose of this study was to determine whether two-handed task training is effective on motor learning of injured cerebral cortex activation and upper extremity function recovery after stroke. [Subjects and Methods] Two hemiplegic subjects participated in this study: one patient was affected on the dominant side of the body and the other was affected on the non-dominant side of the body, and both scored in the range of 58–66 in the Fugl-Meyer assessment. The excitability of the corticospinal tract and Manual Function Test were examined. [Results] The excitability of the corticospinal tract and the Manual Function Test showed significant differences in the activation of both sides of the cerebral cortex and in the variation in learning effect of upper extremity motor function recovery in patients with hemiplegic non-dominant hand (left). [Conclusion] The results suggested that two-handed task training had a different influence on dominant hand (right) and non-dominant hand (left) motor recovery. PMID:28210051

Establishing CAD/CAM in Preclinical Dental Education: Evaluation of a Hands-On Module.

PubMed

Schwindling, Franz Sebastian; Deisenhofer, Ulrich Karl; Porsche, Monika; Rammelsberg, Peter; Kappel, Stefanie; Stober, Thomas

2015-10-01

The aim of this study was to evaluate a hands-on computer-assisted design/computer-assisted manufacture (CAD/CAM) module in a preclinical dental course in restorative dentistry. A controlled trial was conducted by dividing a class of 56 third-year dental students in Germany into study and control groups; allocation to the two groups depended on student schedules. Prior information about CAD/CAM-based restorations was provided for all students by means of lectures, preparation exercises, and production of gypsum casts of prepared resin teeth. The study group (32 students) then participated in a hands-on CAD/CAM module in small groups, digitizing their casts and designing zirconia frameworks for single crowns. The digitization process was introduced to the control group (24 students) solely by means of a video-supported lecture. To assess the knowledge gained, a 20-question written examination was administered; 48 students took the exam. The results were analyzed with Student's t-tests at a significance level of 0.05. The results on the examination showed a significant difference between the two groups: the mean scores were 16.8 (SD 1.7, range 13-19) for the study group and 12.5 (SD 3, range 4-18) for the control group. After the control group had also experienced the hands-on module, a total of 48 students from both groups completed a questionnaire with 13 rating-scale and three open-ended questions evaluating the module. Those results showed that the module was highly regarded by the students. This study supports the idea that small-group hands-on courses are helpful for instruction in digital restoration design. These students' knowledge gained and satisfaction seemed to justify the time, effort, and equipment needed.

Temperature perception on the hand during static vs. dynamic contact with a surface

PubMed Central

Green, Barry G.

2010-01-01

Innocuous cooling or heating of the forearm can evoke nociceptive sensations such as burning, stinging, and pricking (‘low-threshold thermal nociception’, LTN) that are inhibited by dynamic contact. The present study investigated whether LTN can also be perceived on the hand, and if so, whether it is normally suppressed by active touching. Innocuous cold (28°, 25° and 18°C) and warm (38°, 40° and 43°C) temperatures were delivered to the distal metacarpal pads and intermediate and distal phalanges of the fingers via a handgrip thermode that subjects either statically held or actively grasped. The same temperatures were delivered to the forearm via another thermode that either rested on the arm or was touched to the arm. Subjects rated the intensity of thermal (warmth, cold) and nociceptive (e.g., burning) sensations and indicated the qualities of sensation experienced. The results showed that LTN can be perceived on the hand, although less frequently and less intensely than on the forearm. Dynamic contact inhibited nociceptive and thermal sensations on the hand, though less strongly than on the forearm. These findings indicate that temperature perception on the hand is attenuated and its quality changed when thermal stimulation is accompanied by dynamic tactile stimulation, as during haptic exploration. PMID:19525547

Hand-held monitor of sympathetic nervous system using salivary amylase activity and its validation by driver fatigue assessment.

PubMed

Yamaguchi, Masaki; Deguchi, Mitsuo; Wakasugi, Junichi; Ono, Shin; Takai, Noriyasu; Higashi, Tomoyuki; Mizuno, Yasufumi

2006-01-15

In order to realize a hand-held monitor of the sympathetic nervous system, we fabricated a completely automated analytical system for salivary amylase activity using a dry-chemistry system. This was made possible by the fabrication of a disposable test-strip equipped with built-in collecting and reagent papers and an automatic saliva transfer device. In order to cancel out the effects of variations in environmental temperature and pH of saliva, temperature- and pH-adjusted equations were experimentally determined, and each theoretical value was input into the memory of the hand-held monitor. Within a range of salivary amylase activity between 10 and 140 kU/l, the calibration curve for the hand-held monitor showed a coefficient with R(2)=0.97. Accordingly, it was demonstrated that the hand-held monitor enabled a user to automatically measure the salivary amylase activity with high accuracy with only 30 microl sample of saliva within a minute from collection to completion of the measurement. In order to make individual variations of salivary amylase activity negligible during driver fatigue assessment, a normalized equation was proposed. The normalized salivary amylase activity correlated with the mental and physical fatigue states. Thus, this study demonstrated that an excellent hand-held monitor with an algorithm for normalization of individuals' differences in salivary amylase activity, which could be easily and quickly used for evaluating the activity of the sympathetic nervous system at any time. Furthermore, it is suggested that the salivary amylase activity might be used as a better index for psychological research.

The effects of cold immersion and hand protection on grip strength.

PubMed

Vincent, M J; Tipton, M J

1988-08-01

The maximal voluntary grip strength (MVGS) of male volunteers was examined following a series of five intermittent 2 min cold water (5 degrees C) immersions of the unprotected hand or forearm. MVGS changes due to wearing a protective glove were also investigated. The surface electrical activity over the hand flexor muscles was recorded, as was the skin temperature of the hand and forearm. MVGS decreased significantly (p less than 0.01) following hand immersions (16%) and forearm immersion (13%). The majority of these reductions occurred during the first 2-min period of immersion. The effect of wearing a glove after unprotected hand cooling also produced significant (p less than 0.01) MVGS reductions which averaged 14%. These reductions were in addition to those caused by hand cooling. We conclude that both hand and forearm protection are important for the maintenance of hand-grip strength following cold water immersion.

The Engineering Process in Construction & Design

ERIC Educational Resources Information Center

Stoner, Melissa A.; Stuby, Kristin T.; Szczepanski, Susan

2013-01-01

Recent research suggests that high-impact activities in science and math classes promote positive attitudinal shifts in students. By implementing high-impact activities, such as designing a school and a skate park, mathematical thinking can be linked to the engineering design process. This hands-on approach, when possible, to demonstrate or…

Hand hygiene posters: motivators or mixed messages?

PubMed

Jenner, E A; Jones, F; Fletcher, B C; Miller, L; Scott, G M

2005-07-01

Poster campaigns regarding hand hygiene are commonly used by infection control teams to improve practice, yet little is known of the extent to which they are based on established theory or research. This study reports on the content analysis of hand hygiene posters (N=69) and their messages (N=75) using message-framing theory. The results showed that posters seldom drew on knowledge about effective ways to frame messages. Frequently, they simply conveyed information 'telling' rather than 'selling' and some of this was confusing. Most posters were not designed to motivate, and some conveyed mixed messages. Few used fear appeals. Hand hygiene posters could have a greater impact if principles of message framing were utilized in their design. Suggestions for gain-framed messages are offered, but these need to be tested empirically.

Investigating the Activity Design and Development Skills of Geography Teachers

ERIC Educational Resources Information Center

Meydan, Ali

2017-01-01

As geography program has been discussed with the constructivist approach, it has become necessary to enhance the lessons with activities. Geography teachers implement the activities in course books, on the one hand, and also use the activities other teachers prepared or the activities in social network websites, on the other. However, what is more…

Rotationally Actuated Prosthetic Hand

NASA Technical Reports Server (NTRS)

Norton, William E.; Belcher, Jewell G., Jr.; Carden, James R.; Vest, Thomas W.

1991-01-01

Prosthetic hand attached to end of remaining part of forearm and to upper arm just above elbow. Pincerlike fingers pushed apart to degree depending on rotation of forearm. Simpler in design, simpler to operate, weighs less, and takes up less space.

Global cortical activity predicts shape of hand during grasping

PubMed Central

Agashe, Harshavardhan A.; Paek, Andrew Y.; Zhang, Yuhang; Contreras-Vidal, José L.

2015-01-01

Recent studies show that the amplitude of cortical field potentials is modulated in the time domain by grasping kinematics. However, it is unknown if these low frequency modulations persist and contain enough information to decode grasp kinematics in macro-scale activity measured at the scalp via electroencephalography (EEG). Further, it is unclear as to whether joint angle velocities or movement synergies are the optimal kinematics spaces to decode. In this offline decoding study, we infer from human EEG, hand joint angular velocities as well as synergistic trajectories as subjects perform natural reach-to-grasp movements. Decoding accuracy, measured as the correlation coefficient (r) between the predicted and actual movement kinematics, was r = 0.49 ± 0.02 across 15 hand joints. Across the first three kinematic synergies, decoding accuracies were r = 0.59 ± 0.04, 0.47 ± 0.06, and 0.32 ± 0.05. The spatial-temporal pattern of EEG channel recruitment showed early involvement of contralateral frontal-central scalp areas followed by later activation of central electrodes over primary sensorimotor cortical areas. Information content in EEG about the grasp type peaked at 250 ms after movement onset. The high decoding accuracies in this study are significant not only as evidence for time-domain modulation in macro-scale brain activity, but for the field of brain-machine interfaces as well. Our decoding strategy, which harnesses the neural “symphony” as opposed to local members of the neural ensemble (as in intracranial approaches), may provide a means of extracting information about motor intent for grasping without the need for penetrating electrodes and suggests that it may be soon possible to develop non-invasive neural interfaces for the control of prosthetic limbs. PMID:25914616

The Hand Eczema Trial (HET): Design of a randomised clinical trial of the effect of classification and individual counselling versus no intervention among health-care workers with hand eczema.

PubMed

Ibler, Kristina Sophie; Agner, Tove; Hansen, Jane Lindschou; Gluud, Christian

2010-08-31

Hand eczema is the most frequently recognized occupational disease in Denmark with an incidence of approximately 0.32 per 1000 person-years. Consequences of hand eczema include chronic severe eczema, prolonged sick leave, unemployment, and impaired quality of life. New preventive strategies are needed to reduce occupational hand eczema. We describe the design of a randomised clinical trial to investigate the effects of classification of hand eczema plus individual counselling versus no intervention. The trial includes health-care workers with hand eczema identified from a self-administered questionnaire delivered to 3181 health-care workers in three Danish hospitals. The questionnaire identifies the prevalence of hand eczema, knowledge of skin-protection, and exposures that can lead to hand eczema. At entry, all participants are assessed regarding: disease severity (Hand Eczema Severity Index); self-evaluated disease severity; number of eruptions; quality of life; skin protective behaviour, and knowledge of skin protection. The patients are centrally randomised to intervention versus no intervention 1:1 stratified for hospital, profession, and severity score. The experimental group undergoes patch and prick testing; classification of the hand eczema; demonstration of hand washing and appliance of emollients; individual counselling, and a skin-care programme. The control group receives no intervention. All participants are reassessed after six months. The primary outcome is observer-blinded assessment of disease severity and the secondary outcomes are unblinded assessments of disease severity; number of eruptions; knowledge of skin protection; skin-protective behaviour, and quality of life. The trial is registered in ClinicalTrials.Gov, NCT01012453.

What K-8 Principals Should Know about Hands-On Science

ERIC Educational Resources Information Center

Jorgenson, Olaf

2005-01-01

In an increasing number of schools and school systems, active, hands-on science is gaining momentum and realizing remarkable gains in students' science, literacy, and mathematics standardized test achievement. Two recent major research projects have documented significant improvements in objective test results, which are supported by extensive…

Hands-On Surgical Training Workshop: an Active Role-Playing Patient Education for Adolescents.

PubMed

Wongkietkachorn, Apinut; Boonyawong, Pangpoom; Rhunsiri, Peera; Tantiphlachiva, Kasaya

2017-09-01

Most patient education involves passive learning. To improve patient education regarding surgery, an active learning workshop-based teaching method is proposed. The objective of this study was to assess level of patient surgical knowledge, achievement of workshop learning objectives, patient apprehension about future surgery, and participant workshop satisfaction after completing a surgical training workshop. A four-station workshop (surgical scrub, surgical suture, laparoscopic surgery, and robotic surgery) was developed to teach four important components of the surgical process. Healthy, surgery-naive adolescents were enrolled to attend this 1-h workshop-based training program. Training received by participants was technically and procedurally identical to training received by actual surgeons. Pre- and post-workshop questionnaires were used to assess learning outcomes. There were 1312 participants, with a mean age 15.9 ± 1.1 years and a gender breakdown of 303 males and 1009 females. For surgical knowledge, mean pre-workshop and post-workshop scores were 6.1 ± 1.5 and 7.5 ± 1.5 (out of 10 points), respectively (p < 0.001). Out of 5 possible points, achievement of learning objectives, decreased apprehension about future surgery, and overall workshop satisfaction scores were all higher than 4.5. Active, hands-on patient education is an effective way to improve understanding of surgery-related processes. This teaching method may also decrease apprehension that patients or potential patients harbor regarding a future surgical procedure.

A Year of Hands-on Science: Exciting Theme Units with More Than 100 Activities, Projects, and Experiments To Make Science Come Alive.

ERIC Educational Resources Information Center

Kepler, Lynne; Novelli, Joan, Ed.

This book contains 18 themed teaching units with 2 themes per chapter, organized seasonally around the traditional school year. Each theme includes natural connections and hands-on science activities that correspond to what children are already observing in their world. Each chapter begins with highlights of the month and a reproducible "Science…

A proposal for new neurorehabilitative intervention on Moebius Syndrome patients after 'smile surgery'. Proof of concept based on mirror neuron system properties and hand-mouth synergistic activity.

PubMed

Ferrari, Pier Francesco; Barbot, Anna; Bianchi, Bernardo; Ferri, Andrea; Garofalo, Gioacchino; Bruno, Nicola; Coudé, Gino; Bertolini, Chiara; Ardizzi, Martina; Nicolini, Ylenia; Belluardo, Mauro; Stefani, Elisa De

2017-05-01

Studies of the last twenty years on the motor and premotor cortices of primates demonstrated that the motor system is involved in the control and initiation of movements, and in higher cognitive processes, such as action understanding, imitation, and empathy. Mirror neurons are only one example of such theoretical shift. Their properties demonstrate that motor and sensory processing are coupled in the brain. Such knowledge has been also central for designing new neurorehabilitative therapies for patients suffering from brain injuries and consequent motor deficits. Moebius Syndrome patients, for example, are incapable of moving their facial muscles, which are fundamental for affective communication. These patients face an important challenge after having undergone a corrective surgery: reanimating the transplanted muscles to achieve a voluntarily control of smiling. We propose two new complementary rehabilitative approaches on MBS patients based on observation/imitation therapy (Facial Imitation Therapy, FIT) and on hand-mouth motor synergies (Synergistic Activity Therapy, SAT). Preliminary results show that our intervention protocol is a promising approach for neurorehabilitation of patients with facial palsy. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effectiveness of Technological Design on Elementary Student Teachers' Understanding of Air Resistance, Gravity, Terminal Velocity and Acceleration: Model Parachute Race Activity

ERIC Educational Resources Information Center

Aydin, Mirac; Bakirci, Hasan; Artun, Huseyin; Cepni, Salih

2013-01-01

Educational research maintains that, teaching science through designing technology has significant educational potential. Although the literature emphasizes that making technological designs is beneficial for students, it is stressed that studies about technological design generally focus on mental structures rather than hand skills of students…

[The morphological features of skin wounds inflicted by joinery hand saws designed for different types of sawing].

PubMed

Sarkisian, B A; Azarov, P A

2014-01-01

The objective of the present work was to study the morphological features of skin wounds inflicted by joinery hand saws designed for longitudinal, transverse, and mixed sawing. A total of 60 injuries to the thigh skin inflicted by the recurring and reciprocating saw movements were simulated. The hand saws had 5 mm high "sharp" and "blunt"-tipped teeth. The analysis of the morphological features of the wounds revealed differences in their length and depth, shape of edge cuts and defects, and the relief of the walls depending on the sawtooth sharpness and the mode of sawing. It is concluded that morphological features of the wounds may be used to determine the type of the saw, the sharpness of its teeth, the direction and frequency of its movements.

Association of activity changes in the primary sensory cortex with successful motor rehabilitation of the hand following stroke.

PubMed

Laible, Mona; Grieshammer, Steven; Seidel, Gundula; Rijntjes, Michel; Weiller, Cornelius; Hamzei, Farsin

2012-09-01

Previous studies demonstrated a posterior shift of activation toward the primary sensory cortex (S1) following stroke; however, any relationship between this posterior shift and clinical outcome measures for the affected hand function were unclear. The authors investigated the possible role of S1 in motor recovery. Assuming that previous studies examined inhomogeneous groups of patients, the authors selected participants with chronic stroke who had moderate hand paresis, normal sensory examination and somatosensory-evoked potentials, and no lesion within the S1, thalamus, or brain stem. Constraint-induced movement therapy (CIMT) was used to train the impaired hand. To relate fMRI (functional MRI) activation changes from baseline to post-CIMT, a correlation analysis was performed with changes of the Wolf Motor Function Test (WMFT) as a test for the hand function. A close relationship was found between increases in hand function and peak changes in activation within the ipsilesional S1. With a better outcome, greater increases in activation within the S1 were evident (P < .03; r = 0.73). In selected patients, the sensory network influences training-induced motor gains. This predictive knowledge of plasticity when applying CIMT may suggest strategies to enhance the effect of therapy, such as the addition of electrical stimulation to enhance S1 excitability.

A Handful of Bacteria: A Simple Activity That Engages Students to Think and Write Like a Scientist

ERIC Educational Resources Information Center

Song, Pengfei

2014-01-01

Non-major students taking science courses to fulfill degree requirements may show low interest in traditional lecture-based classrooms. While professors may try to incorporate hands-on activities to the classroom to foster enthusiasm, the development of a low-cost, low-hazard scienitfic activity that engages students can be challenging. Moreover,…

Practicing universal design to actual hand tool design process.

PubMed

Lin, Kai-Chieh; Wu, Chih-Fu

2015-09-01

UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Transfer and persistence of non-self DNA on hands over time: Using empirical data to evaluate DNA evidence given activity level propositions.

PubMed

Szkuta, Bianca; Ballantyne, Kaye N; Kokshoorn, Bas; van Oorschot, Roland A H

2018-03-01

Questions relating to how DNA from an individual got to where it was recovered from and the activities associated with its pickup, retention and deposition are increasingly relevant to criminal investigations and judicial considerations. To address activity level propositions, investigators are typically required to assess the likelihood that DNA was transferred indirectly and not deposited through direct contact with an item or surface. By constructing a series of Bayesian networks, we demonstrate their use in assessing activity level propositions derived from a recent legal case involving the alleged secondary transfer of DNA to a surface following a handshaking event. In the absence of data required to perform the assessment, a set of handshaking simulations were performed to obtain probabilities on the persistence of non-self DNA on the hands following a 40min, 5h or 8h delay between the handshake and contact with the final surface (an axe handle). Variables such as time elapsed, and the activities performed and objects contacted between the handshake and contact with the axe handle, were also considered when assessing the DNA results. DNA from a known contributor was transferred to the right hand of an opposing hand-shaker (as a depositor), and could be subsequently transferred to, and detected on, a surface contacted by the depositor 40min to 5h post-handshake. No non-self DNA from the known contributor was detected in deposits made 8h post-handshake. DNA from the depositor was generally detected as the major or only contributor in the profiles generated. Contributions from the known contributor were minor, decreasing in presence and in the strength of support for inclusion as the time between the handshake and transfer event increased. The construction of a series of Bayesian networks based on the case circumstances provided empirical estimations of the likelihood of direct or indirect deposition. The analyses and conclusions presented demonstrate both the

Usable Translational Hand Controllers for NASA's Habitability Design Center

NASA Technical Reports Server (NTRS)

Westbrook, Kimberly

2016-01-01

This summer I was given the opportunity to work at the Habitability Design Center (HDC). NASA Johnson Space Center's HDC is currently developing Cislunar and Mars spacecraft mockups. I contributed to this effort by designing from scratch low cost, functional translational hand controllers (THCs) that will be used in spacecraft mission simulation in low to medium fidelity exploration spacecraft mockups. This project fell under the category of mechatronics, a combination of mechanical, electrical, and computer engineering. Being an aerospace engineering student, I was out of my comfort zone. And that was a wonderful thing. The autonomy that my mentor, Dr. Robert Howard, allowed me gave me the opportunity to learn by trying, failing, and trying again. This project was not only a professional success for me, but a significant learning experience. I appreciated the freedom that I had to take the time to learn new things for myself rather than blindly follow instructions. I was the sole person working on this project, and was required to work independently to solve the many hardware and software challenges that the project entailed. I researched THCs that have been used on the ISS, the Space Shuttle, and the Orion MPVC and based my design off of these. I worked through many redesigns before finding an optimal configuration of the necessary mechanisms and electrical components for the THC. Once I had a functional hardware design, I dove into the challenge of getting an Arduino Uno, an extremely low cost and easily programmable microcontroller, to behave as a human interface device. The THCs I built needed to be able to integrate to a mission simulation designed by NASA's Graphics and Visualization Lab. This proved to be the most challenging aspect of the project. To accomplish this I learned how to change the firmware of the USB serial converter microcontroller. The process was very complicated as it involved multiple software programs and manual flashing of pins on the

Bring the Poles to Your Classroom & Community Through Linked Hands-on Learning & IPY Data

NASA Astrophysics Data System (ADS)

Turrin, M.; Bell, R. E.; Kastens, K. A.; Pfirman, S. L.

2009-12-01

Two major legacies of the 4th International Polar Year (IPY 2007-9) are a newly galvanized educational community and an immense volume of polar data collected by the global science community. The tremendous new polar datasets represent a unique opportunity to communicate the nature of the changing poles to student and public audiences through this polar savvy educational community if effective approaches to link data and understanding are employed. We have developed a strategy for polar education that leverages the IPY data resources, linked with the polar education hands-on ‘manipulatives’ (materials that students can manipulate in a dynamic manner). This linked approach leverages the fundamental inquiry based learning but recognizes that particularly in the polar sciences the size of the earth, the remoteness of the poles and the scale of its processes make it difficult for students to explore in a hands-on manner. The linking of polar hands-on ‘manipulatives’ with IPY data provides a bridge between the tangible and the global. Alone manipulative activities can be beneficial in their ability to help students visualize a process or behavior, but without a strong link back to the Earth through data or evidence the understanding of the process is not transferred from the classroom model to the full scale Earth. The use of activities or models is beneficial in connecting the learner to the polar process(es), while the IPY data provides a unique opportunity to ground the polar manipulative experiments in real data. This linked strategy emerged from a series of NSF sponsored IPY Polar Fairs at major science museums that reached in excess of 12,000 people. The design of the fairs was that polar scientists developed activities linking low cost hands-on manipulatives to scientific evidence/data that was displayed in posters, images, and video clips. The participating scientists walked the ‘audience’ through the hands-on manipulative, then discussed their

Hands-On Science Mysteries for Grades 3-6: Standards-Based Inquiry Investigations

ERIC Educational Resources Information Center

Taris, James Robert; Taris, Louis James

2006-01-01

In "Hands-On Science Mysteries for Grades 3-6," the authors connect science to real-world situations by investigating actual mysteries and phenomena, such as the strange heads on Easter Island, the ghost ship "Mary Celeste," and the "Dancing Stones" of Death Valley. The labs are designed to encourage the development…

The Impact of Hands-On-Approach on Student Academic Performance in Basic Science and Mathematics

ERIC Educational Resources Information Center

Ekwueme, Cecilia O.; Ekon, Esther E.; Ezenwa-Nebife, Dorothy C.

2015-01-01

Children can learn mathematics and sciences effectively even before being exposed to formal school curriculum if basic Mathematics and Sciences concepts are communicated to them early using activity oriented (Hands-on) method of teaching. Mathematics and Science are practical and activity oriented and can best be learnt through inquiry (Okebukola…

A hand hygiene intervention to decrease infections among children attending day care centers: design of a cluster randomized controlled trial

PubMed Central

2013-01-01

Background Day care center attendance has been recognized as a risk factor for acquiring gastrointestinal and respiratory infections, which can be prevented with adequate hand hygiene (HH). Based on previous studies on environmental and sociocognitive determinants of caregivers’ compliance with HH guidelines in day care centers (DCCs), an intervention has been developed aiming to improve caregivers’ and children’s HH compliance and decrease infections among children attending DCCs. The aim of this paper is to describe the design of a cluster randomized controlled trial to evaluate the effectiveness of this intervention. Methods/design The intervention will be evaluated in a two-arm cluster randomized controlled trial among 71 DCCs in the Netherlands. In total, 36 DCCs will receive the intervention consisting of four components: 1) HH products (dispensers and refills for paper towels, soap, alcohol-based hand sanitizer, and hand cream); 2) training to educate about the Dutch national HH guidelines; 3) two team training sessions aimed at goal setting and formulating specific HH improvement activities; and 4) reminders and cues to action (posters/stickers). Intervention DCCs will be compared to 35 control DCCs continuing usual practice. The primary outcome measure will be observed HH compliance of caregivers and children, measured at baseline and one, three, and six months after start of the intervention. The secondary outcome measure will be the incidence of gastrointestinal and respiratory infections in 600 children attending DCCs, monitored over six months by parents using a calendar to mark the days their child has diarrhea and/or a cold. Multilevel logistic regression will be performed to assess the effect of the intervention on HH compliance. Multilevel poisson regression will be performed to assess the incidence of gastrointestinal and respiratory infections in children attending DCCs. Discussion This is one of the first DCC intervention studies to assess

Reconstructive hand surgery for quadriplegic persons.

PubMed

Ainsley, J; Voorhees, C; Drake, E

1985-11-01

Reconstructive hand surgery is one approach to restoring lost hand function in quadriplegic patients. This paper describes Craig Hospital's experience with the two-stage procedure for achieving active grasp and pinch for C7 spinal cord-injured patients. It describes the hand clinic, patient selection and education, the surgery itself, and postsurgical occupational therapy. It also includes follow-up results on all patients treated since the program's inception.

Second-hand exposure to tobacco smoke and its effect on disease activity in Swedish rheumatoid arthritis patients. Data from BARFOT, a multicenter study of RA.

PubMed

Söderlin, Maria K; Andersson, Maria; Bergman, Stefan

2013-01-01

We studied the prevalence and effect on disease activity of ever having had second-hand exposure to tobacco smoke in Swedish rheumatoid arthritis (RA) patients who had never smoked. Between 1992 and 2005, 2,800 patients were included in the BARFOT early-RA study in Sweden. Disease Activity Score 28 joints (DAS28), C-reactive protein (CRP), Health Assessment Questionnaire (HAQ), rheumatoid factor (RF), general health and pain visual analogue scales (VAS), and drug treatment were registered at inclusion and at follow-up at 3, 6, and 12 months and 2 and 5 years. EULAR response criteria were applied at the same follow-up points. In 2010, a self-completion postal questionnaire was sent to 2,102 patients in the BARFOT study enquiring about lifestyle habits such as whether they had ever been exposed to tobacco smoke as a result of someone else smoking. A total of 963/1,421 patients (68%) had had second-hand exposure to tobacco smoke. At 3, 6, and 12 months, at 2 years, and at 5 years of follow-up, there were no differences in EULAR response between patients who had never smoked and who had been exposed or had not been exposed second-hand to tobacco smoke (p=0.91, p=0.88, p=0.84, p=0.61 and p=0.85, respectively). We did not find any association between second-hand exposure to tobacco smoke and disease activity in RA.

Laterality and body ownership: Effect of handedness on experience of the rubber hand illusion.

PubMed

Smit, M; Kooistra, D I; van der Ham, I J M; Dijkerman, H C

2017-11-01

Body ownership has mainly been linked to the right hemisphere and larger interhemispheric connectivity has been shown to be associated with greater right hemispheric activation. Mixed-handed participants tend to have more interhemispheric connectivity compared to extreme handed participants. The aim of this study was to examine whether feelings of ownership as assessed with the rubber hand illusion (RHI) are differentiated by handedness and differed between the left and right hand. Sinistrals-, dextrals-, and mixed-handed individuals (n = 63) were subjected to the RHI. Stroking was synchronously and asynchronously performed on both the participant's hand and a rubber hand. Outcome measures were an embodiment questionnaire and proprioceptive drift. In contrast to our hypotheses we show a similar experience of ownership for all groups, which may indicate no hemispheric specialization for the illusion. In addition, plasticity of ownership and body ownership are similar for the left hand and right hand in all participants, which suggests similar representations for both hands in the brain. This might be useful to maintain a coherent sense of the body in space.

Evidence of common and separate eye and hand accumulators underlying flexible eye-hand coordination

PubMed Central

Jana, Sumitash; Gopal, Atul

2016-01-01

Eye and hand movements are initiated by anatomically separate regions in the brain, and yet these movements can be flexibly coupled and decoupled, depending on the need. The computational architecture that enables this flexible coupling of independent effectors is not understood. Here, we studied the computational architecture that enables flexible eye-hand coordination using a drift diffusion framework, which predicts that the variability of the reaction time (RT) distribution scales with its mean. We show that a common stochastic accumulator to threshold, followed by a noisy effector-dependent delay, explains eye-hand RT distributions and their correlation in a visual search task that required decision-making, while an interactive eye and hand accumulator model did not. In contrast, in an eye-hand dual task, an interactive model better predicted the observed correlations and RT distributions than a common accumulator model. Notably, these two models could only be distinguished on the basis of the variability and not the means of the predicted RT distributions. Additionally, signatures of separate initiation signals were also observed in a small fraction of trials in the visual search task, implying that these distinct computational architectures were not a manifestation of the task design per se. Taken together, our results suggest two unique computational architectures for eye-hand coordination, with task context biasing the brain toward instantiating one of the two architectures. NEW & NOTEWORTHY Previous studies on eye-hand coordination have considered mainly the means of eye and hand reaction time (RT) distributions. Here, we leverage the approximately linear relationship between the mean and standard deviation of RT distributions, as predicted by the drift-diffusion model, to propose the existence of two distinct computational architectures underlying coordinated eye-hand movements. These architectures, for the first time, provide a computational basis for

Optimizing pattern recognition-based control for partial-hand prosthesis application.

PubMed

Earley, Eric J; Adewuyi, Adenike A; Hargrove, Levi J

2014-01-01

Partial-hand amputees often retain good residual wrist motion, which is essential for functional activities involving use of the hand. Thus, a crucial design criterion for a myoelectric, partial-hand prosthesis control scheme is that it allows the user to retain residual wrist motion. Pattern recognition (PR) of electromyographic (EMG) signals is a well-studied method of controlling myoelectric prostheses. However, wrist motion degrades a PR system's ability to correctly predict hand-grasp patterns. We studied the effects of (1) window length and number of hand-grasps, (2) static and dynamic wrist motion, and (3) EMG muscle source on the ability of a PR-based control scheme to classify functional hand-grasp patterns. Our results show that training PR classifiers with both extrinsic and intrinsic muscle EMG yields a lower error rate than training with either group by itself (p<0.001); and that training in only variable wrist positions, with only dynamic wrist movements, or with both variable wrist positions and movements results in lower error rates than training in only the neutral wrist position (p<0.001). Finally, our results show that both an increase in window length and a decrease in the number of grasps available to the classifier significantly decrease classification error (p<0.001). These results remained consistent whether the classifier selected or maintained a hand-grasp.

Evaluation of an alcohol-based surgical hand disinfectant containing a synergistic combination of farnesol and benzethonium chloride for immediate and persistent activity against resident hand flora of volunteers and with a novel in vitro pig skin model.

PubMed

Shintre, Milind S; Gaonkar, Trupti A; Modak, Shanta M

2007-02-01

To evaluate the immediate, persistent and sustained in vivo activity of an alcohol-based surgical hand disinfectant, consisting of a zinc gel and a preservative system containing a synergistic combination of farnesol and benzethonium chloride (ZBF disinfectant), and to develop a pig skin model for in vitro evaluation of the immediate and persistent efficacy of alcohol-based surgical hand disinfectants against resident hand flora. The in vivo immediate, persistent, and sustained activity of ZBF disinfectant was evaluated using human volunteers and the "glove-juice" method described in the US Food and Drug Administration's Tentative Final Monograph (FDA-TFM) for Healthcare Antiseptic Products. A novel in vitro pig skin model was developed to compare the immediate and persistent activity of alcohol-based surgical hand disinfectants against resident flora using Staphylococcus epidermidis as the test organism. Four alcohol-based surgical hand disinfectants were evaluated using this model. The results for the ZBF disinfectant exceed the FDA-TFM criteria for immediate, persistent, and sustained activity required for surgical hand disinfectants. The reduction factors for the 4 hand disinfectants obtained using the pig skin model show good agreement with the log(10) reductions in concentrations of hand flora obtained using human volunteers to test for immediate and persistent activity. The ZBF disinfectant we evaluated met the FDA-TFM criteria for surgical hand disinfectants. The immediate and persistent efficacy of the surgical hand disinfectants evaluated with the novel pig skin model described in this study shows good agreement with the results obtained in vivo.

Development of a Prototype Over-Actuated Biomimetic Prosthetic Hand

PubMed Central

Williams, Matthew R.; Walter, Wayne

2015-01-01

The loss of a hand can greatly affect quality of life. A prosthetic device that can mimic normal hand function is very important to physical and mental recuperation after hand amputation, but the currently available prosthetics do not fully meet the needs of the amputee community. Most prosthetic hands are not dexterous enough to grasp a variety of shaped objects, and those that are tend to be heavy, leading to discomfort while wearing the device. In order to attempt to better simulate human hand function, a dexterous hand was developed that uses an over-actuated mechanism to form grasp shape using intrinsic joint mounted motors in addition to a finger tendon to produce large flexion force for a tight grip. This novel actuation method allows the hand to use small actuators for grip shape formation, and the tendon to produce high grip strength. The hand was capable of producing fingertip flexion force suitable for most activities of daily living. In addition, it was able to produce a range of grasp shapes with natural, independent finger motion, and appearance similar to that of a human hand. The hand also had a mass distribution more similar to a natural forearm and hand compared to contemporary prosthetics due to the more proximal location of the heavier components of the system. This paper describes the design of the hand and controller, as well as the test results. PMID:25790306

Functional Anatomy of Writing with the Dominant Hand

PubMed Central

Najee-ullah, Muslimah ‘Ali; Hallett, Mark

2013-01-01

While writing performed by any body part is similar in style, indicating a common program, writing with the dominant hand is particularly skilled. We hypothesized that this skill utilizes a special motor network supplementing the motor equivalence areas. Using functional magnetic resonance imaging in 13 normal subjects, we studied nine conditions: writing, zigzagging and tapping, each with the right hand, left hand and right foot. We identified brain regions activated with the right (dominant) hand writing task, exceeding the activation common to right-hand use and the writing program, both identified without right-hand writing itself. Right-hand writing significantly differed from the other tasks. First, we observed stronger activations in the left dorsal prefrontal cortex, left intraparietal sulcus and right cerebellum. Second, the left anterior putamen was required to initiate all the tested tasks, but only showed sustained activation during the right-hand writing condition. Lastly, an exploratory analysis showed clusters in the left ventral premotor cortex and inferior and superior parietal cortices were only significantly active for right-hand writing. The increased activation with right-hand writing cannot be ascribed to increased effort, since this is a well-practiced task much easier to perform than some of the other tasks studied. Because parietal-premotor connections code for particular skills, it would seem that the parietal and premotor regions, together with basal ganglia-sustained activation likely underlie the special skill of handwriting with the dominant hand. PMID:23844132

Functional anatomy of writing with the dominant hand.

PubMed

Horovitz, Silvina G; Gallea, Cecile; Najee-Ullah, Muslimah 'ali; Hallett, Mark

2013-01-01

While writing performed by any body part is similar in style, indicating a common program, writing with the dominant hand is particularly skilled. We hypothesized that this skill utilizes a special motor network supplementing the motor equivalence areas. Using functional magnetic resonance imaging in 13 normal subjects, we studied nine conditions: writing, zigzagging and tapping, each with the right hand, left hand and right foot. We identified brain regions activated with the right (dominant) hand writing task, exceeding the activation common to right-hand use and the writing program, both identified without right-hand writing itself. Right-hand writing significantly differed from the other tasks. First, we observed stronger activations in the left dorsal prefrontal cortex, left intraparietal sulcus and right cerebellum. Second, the left anterior putamen was required to initiate all the tested tasks, but only showed sustained activation during the right-hand writing condition. Lastly, an exploratory analysis showed clusters in the left ventral premotor cortex and inferior and superior parietal cortices were only significantly active for right-hand writing. The increased activation with right-hand writing cannot be ascribed to increased effort, since this is a well-practiced task much easier to perform than some of the other tasks studied. Because parietal-premotor connections code for particular skills, it would seem that the parietal and premotor regions, together with basal ganglia-sustained activation likely underlie the special skill of handwriting with the dominant hand.

Further information on the prehistoric representations of human hands in the cave of Gargas

PubMed Central

Hooper, Alex

1980-01-01

This paper amends and adds recent information to Paul A. Janssens' earlier article on the prehistoric paintings of human hands in the cave of Gargas, France.1 Possible diagnoses for the deficiencies found in many of the hand pictures, and some non-medical theories of explanation, are reviewed. It is concluded that the hands used as stencils were mutilated and that the images were deliberately placed within the cave and were not the by-products of some other activity. PMID:6990130

On the Other Hand: Overflow Movements of Infants’ Hands and Legs During Unimanual Object Exploration

PubMed Central

Soska, Kasey C.; Galeon, Margaret A.; Adolph, Karen E.

2011-01-01

Motor overflow is extraneous movement in a limb not involved in a motor action. Typically, overflow is observed in people with neurological impairments and in healthy children and adults during strenuous and attention-demanding tasks. In the current study, we found that young infants produce vast amounts of motor overflow, corroborating claims of symmetry being the default state of the motor system. While manipulating an object with one hand, all 27 of the typically-developing 4.5- to 7.5-month-old infants who we observed displayed overflow movements of the free hand (on 4/5 of unimanual actions). Mirror-image movements of the hands occurred on 1/8 of unimanual actions, and the hands and legs moved in synchrony on 1/3 of unimanual acts. Motor overflow was less frequent when infants were in a sitting posture and when infants watched their acting hand, suggesting that upright posture and visual examination may help to alleviate overflow and break obligatory symmetry in healthy infants. PMID:22487940

Smart Hand For Manipulators

NASA Astrophysics Data System (ADS)

Fiorini, Paolo

1987-10-01

Sensor based, computer controlled end effectors for mechanical arms are receiving more and more attention in the robotics industry, because commonly available grippers are only adequate for simple pick and place tasks. This paper describes the current status of the research at JPL on a smart hand for a Puma 560 robot arm. The hand is a self contained, autonomous system, capable of executing high level commands from a supervisory computer. The mechanism consists of parallel fingers, powered by a DC motor, and controlled by a microprocessor embedded in the hand housing. Special sensors are integrated in the hand for measuring the grasp force of the fingers, and for measuring forces and torques applied between the arm and the surrounding environment. Fingers can be exercised under position, velocity and force control modes. The single-chip microcomputer in the hand executes the tasks of communication, data acquisition and sensor based motor control, with a sample cycle of 2 ms and a transmission rate of 9600 baud. The smart hand described in this paper represents a new development in the area of end effector design because of its multi-functionality and autonomy. It will also be a versatile test bed for experimenting with advanced control schemes for dexterous manipulation.

Enhanced Motor Imagery-Based BCI Performance via Tactile Stimulation on Unilateral Hand.

PubMed

Shu, Xiaokang; Yao, Lin; Sheng, Xinjun; Zhang, Dingguo; Zhu, Xiangyang

2017-01-01

Brain-computer interface (BCI) has attracted great interests for its effectiveness in assisting disabled people. However, due to the poor BCI performance, this technique is still far from daily-life applications. One of critical issues confronting BCI research is how to enhance BCI performance. This study aimed at improving the motor imagery (MI) based BCI accuracy by integrating MI tasks with unilateral tactile stimulation (Uni-TS). The effects were tested on both healthy subjects and stroke patients in a controlled study. Twenty-two healthy subjects and four stroke patients were recruited and randomly divided into a control-group and an enhanced-group. In the control-group, subjects performed two blocks of conventional MI tasks (left hand vs. right hand), with 80 trials in each block. In the enhanced-group, subjects also performed two blocks of MI tasks, but constant tactile stimulation was applied on the non-dominant/paretic hand during MI tasks in the second block. We found the Uni-TS significantly enhanced the contralateral cortical activations during MI of the stimulated hand, whereas it had no influence on activation patterns during MI of the non-stimulated hand. The two-class BCI decoding accuracy was significantly increased from 72.5% (MI without Uni-TS) to 84.7% (MI with Uni-TS) in the enhanced-group ( p < 0.001, paired t -test). Moreover, stroke patients in the enhanced-group achieved an accuracy >80% during MI with Uni-TS. This novel approach complements the conventional methods for BCI enhancement without increasing source information or complexity of signal processing. This enhancement via Uni-TS may facilitate clinical applications of MI-BCI.

A Low-Cost Hand Trainer Device Based On Microcontroller Platform

NASA Astrophysics Data System (ADS)

Sabor, Muhammad Akmal Mohammad; Thamrin, Norashikin M.

2018-03-01

Conventionally, the rehabilitation equipment used in the hospital or recovery center to treat and train the muscle of the stroke patient is implementing the pneumatic or compressed air machine. The main problem caused by this equipment is that the arrangement of the machine is quite complex and the position of it has been locked and fixed, which can cause uncomfortable feeling to the patients throughout the recovery session. Furthermore, the harsh movement from the machine could harm the patient as it does not allow flexibility movement and the use of pneumatic actuator has increased the gripping force towards the patient which could hurt them. Therefore, the main aim of this paper is to propose the development of the Bionic Hand Trainer based on Arduino platform, for a low-cost solution for rehabilitation machine as well as allows flexibility and smooth hand movement for the patients during the healing process. The scope of this work is to replicate the structure of the hand only at the fingers structure that is the phalanges part, which inclusive the proximal, intermediate and distal of the fingers. In order to do this, a hand glove is designed by equipping with flex sensors at every finger and connected them to the Arduino platform. The movement of the hand will motorize the movement of the dummy hand that has been controlled by the servo motors, which have been equipped along the phalanges part. As a result, the bending flex sensors due to the movement of the fingers has doubled up the rotation of the servo motors to mimic this movement at the dummy hand. The voltage output from the bending sensors are ranging from 0 volt to 5 volts, which are suitable for low-cost hand trainer device implementation. Through this system, the patient will have the power to control their gripping operation slowly without having a painful force from the external actuators throughout the rehabilitation process.

A frequency-duty cycle equation for the ACGIH hand activity level.

PubMed

Radwin, Robert G; Azari, David P; Lindstrom, Mary J; Ulin, Sheryl S; Armstrong, Thomas J; Rempel, David

2015-01-01

A new equation for predicting the hand activity level (HAL) used in the American Conference for Government Industrial Hygienists threshold limit value®(TLV®) was based on exertion frequency (F) and percentage duty cycle (D). The TLV® includes a table for estimating HAL from F and D originating from data in Latko et al. (Latko WA, Armstrong TJ, Foulke JA, Herrin GD, Rabourn RA, Ulin SS, Development and evaluation of an observational method for assessing repetition in hand tasks. American Industrial Hygiene Association Journal, 58(4):278-285, 1997) and post hoc adjustments that include extrapolations outside of the data range. Multimedia video task analysis determined D for two additional jobs from Latko's study not in the original data-set, and a new nonlinear regression equation was developed to better fit the data and create a more accurate table. The equation, HAL = 6:56 ln D[F(1:31) /1+3:18 F(1:31), generally matches the TLV® HAL lookup table, and is a substantial improvement over the linear model, particularly for F>1.25 Hz and D>60% jobs. The equation more closely fits the data and applies the TLV® using a continuous function.

Muscular forearm activation in hand-grip tasks with superimposition of mechanical vibrations.

PubMed

Fattorini, L; Tirabasso, A; Lunghi, A; Di Giovanni, R; Sacco, F; Marchetti, E

2016-02-01

The purpose of this paper is to evaluate the muscular activation of the forearm, with or without vibration stimuli at different frequencies while performing a grip tasks of 45s at various level of exerted force. In 16 individuals, 9 females and 7 males, the surface electromyogram (EMG) of extensor carpi radialis longus and the flexor carpi ulnari muscles were assessed. At a short latency from onset EMG, RMS and the level of MU synchronization were assessed to evaluate the muscular adaptations. Whilst a trend of decay of EMG Median frequency (MDFd) was employed as an index of muscular fatigue. Muscular tasks consists of the grip of an instrumented handle at a force level of 20%, 30%, 40%, 60% of the maximum voluntary force. Vibration was supplied by a shaker to the hand in mono-frequential waves at 20, 30, 33 and 40Hz. In relation to EMG, RMS and MU synchronization, the muscular activation does not seem to change with the superimposition of the mechanical vibrations, on the contrary a lower MDFd was observed at 33Hz than in absence of vibration. This suggests an early muscular fatigue induced by vibration due to the fact that 33Hz is a resonance frequency for the hand-arm system. Copyright © 2015 Elsevier Ltd. All rights reserved.

Measuring exertion time, duty cycle and hand activity level for industrial tasks using computer vision.

PubMed

Akkas, Oguz; Lee, Cheng Hsien; Hu, Yu Hen; Harris Adamson, Carisa; Rempel, David; Radwin, Robert G

2017-12-01

Two computer vision algorithms were developed to automatically estimate exertion time, duty cycle (DC) and hand activity level (HAL) from videos of workers performing 50 industrial tasks. The average DC difference between manual frame-by-frame analysis and the computer vision DC was -5.8% for the Decision Tree (DT) algorithm, and 1.4% for the Feature Vector Training (FVT) algorithm. The average HAL difference was 0.5 for the DT algorithm and 0.3 for the FVT algorithm. A sensitivity analysis, conducted to examine the influence that deviations in DC have on HAL, found it remained unaffected when DC error was less than 5%. Thus, a DC error less than 10% will impact HAL less than 0.5 HAL, which is negligible. Automatic computer vision HAL estimates were therefore comparable to manual frame-by-frame estimates. Practitioner Summary: Computer vision was used to automatically estimate exertion time, duty cycle and hand activity level from videos of workers performing industrial tasks.

Relative effectiveness of dominant versus non-dominant hand position for rescuer's side of approach during chest compressions between right-handed and left-handed novice rescuers.

PubMed

You, Je Sung; Kim, Hoon; Park, Jung Soo; Baek, Kyung Min; Jang, Mun Sun; Lee, Hye Sun; Chung, Sung Phil; Kim, SeungWhan

2015-03-01

The major components affecting high quality cardiopulmonary resuscitation (CPR) have been defined as the ability of the rescuer, hand position, position of the rescuer and victim, depth and rate of chest compressions, and fatigue. Until now, there have been no studies on dominant versus non-dominant hand position and the rescuer's side of approach. This study was designed to evaluate the effectiveness of hand position and approach side on the quality of CPR between right-handed (RH) and left-handed (LH) novice rescuers. 44 health science university students with no previous experience of basic life support (BLS) volunteered for the study. We divided volunteers into two groups by handedness. Adult BLS was performed on a manikin for 2 min in each session. The sequences were randomly performed on the manikin's left side of approach (Lap) with the rescuer's left hand in contact with the sternum (Lst), Lap/Rst, Rap/Lst and Rap/Rst. We compared the quality of chest compressions between the RH and LH groups according to predetermined positions. A significant decrease in mean compression depth between the two groups was only observed when rescuers performed in the Rap/Lst scenario, regardless of hand dominance. The frequency of correct hand placement also significantly decreased in the Lap/Rst position for the LH group. The performance of novice rescuers during chest compressions is influenced by the position of the dominant hand and the rescuer's side of approach. In CPR training and real world situations, a novice rescuer, regardless of handedness, should consider hand positions for contacting the sternum identical to the side of approach after approaching from the nearest and most accessible side, for optimal CPR performance. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Probability of spacesuit-induced fingernail trauma is associated with hand circumference.

PubMed

Opperman, Roedolph A; Waldie, James M A; Natapoff, Alan; Newman, Dava J; Jones, Jeffrey A

2010-10-01

A significant number of astronauts sustain hand injuries during extravehicular activity training and operations. These hand injuries have been known to cause fingernail delamination (onycholysis) that requires medical intervention. This study investigated correlations between the anthropometrics of the hand and susceptibility to injury. The analysis explored the hypothesis that crewmembers with a high finger-to-hand size ratio are more likely to experience injuries. A database of 232 crewmembers' injury records and anthropometrics was sourced from NASA Johnson Space Center. No significant effect of finger-to-hand size was found on the probability of injury, but circumference and width of the metacarpophalangeal (MCP) joint were found to be significantly associated with injuries by the Kruskal-Wallis test. A multivariate logistic regression showed that hand circumference is the dominant effect on the likelihood of onycholysis. Male crewmembers with a hand circumference > 22.86 cm (9") have a 19.6% probability of finger injury, but those with hand circumferences < or = 22.86 cm (9") only have a 5.6% chance of injury. Findings were similar for female crewmembers. This increased probability may be due to constriction at large MCP joints by the current NASA Phase VI glove. Constriction may lead to occlusion of vascular flow to the fingers that may increase the chances of onycholysis. Injury rates are lower on gloves such as the superseded series 4000 and the Russian Orlan that provide more volume for the MCP joint. This suggests that we can reduce onycholysis by modifying the design of the current gloves at the MCP joint.

Visual, motor and attentional influences on proprioceptive contributions to perception of hand path rectilinearity during reaching

PubMed Central

Scheidt, Robert A.; Lillis, Kyle P.; Emerson, Scott J.

2010-01-01

We examined how proprioceptive contributions to perception of hand path straightness are influenced by visual, motor and attentional sources of performance variability during horizontal planar reaching. Subjects held the handle of a robot that constrained goal-directed movements of the hand to paths of controlled curvature. Subjects attempted to detect the presence of hand path curvature during both active (subject-driven) and passive (robot-driven) movements that either required active muscle force production or not. Subjects were less able to discriminate curved from straight paths when actively reaching for a target vs. when the robot moved their hand through the same curved paths. This effect was especially evident during robot-driven movements requiring concurrent activation of lengthening but not shortening muscles. Subjects were less likely to report curvature and were more variable in reporting when movements appeared straight in a novel “visual channel” condition previously shown to block adaptive updating of motor commands in response to deviations from a straight-line hand path. Similarly compromised performance was obtained when subjects simultaneously performed a distracting secondary task (key pressing with the contralateral hand). The effects compounded when these last two treatments were combined. It is concluded that environmental, intrinsic and attentional factors all impact the ability to detect deviations from a rectilinear hand path during goal-directed movement by decreasing proprioceptive contributions to limb state estimation. In contrast, response variability increased only in experimental conditions thought to impose additional attentional demands on the observer. Implications of these results for perception and other sensorimotor behaviors are discussed. PMID:20532489

A Qualitative Evaluation of Hand Drying Practices among Kenyans

PubMed Central

Person, Bobbie; Schilling, Katharine; Owuor, Mercy; Ogange, Lorraine; Quick, Rob

2013-01-01

Background Recommended disease prevention behaviors of hand washing, hygienic hand drying, and covering one’s mouth and nose in a hygienic manner when coughing and sneezing appear to be simple behaviors but continue to be a challenge to successfully promote and sustain worldwide. We conducted a qualitative inquiry to better understand current hand drying behaviors associated with activities of daily living, and mouth and nose covering practices, among Kenyans. Methods and Findings We conducted 7 focus group discussions; 30 in-depth interviews; 10 structured household observations; and 75 structured observations in public venues in the urban area of Kisumu; rural communities surrounding Kisumu; and a peri-urban area outside Nairobi, Kenya. Using a grounded theory approach, we transcribed and coded the narrative data followed by thematic analysis of the emergent themes. Hand drying, specifically on a clean towel, was not a common practice among our participants. Most women dried their hands on their waist cloth, called a leso, or their clothes whether they were cooking, eating or cleaning the nose of a young child. If men dried their hands, they used their trousers or a handkerchief. Children rarely dried their hands; they usually just wiped them on their clothes, shook them, or left them wet as they continued with their activities. Many people sneezed into their hands and wiped them on their clothes. Men and women used a handkerchief fairly often when they had a runny nose, cold, or the flu. Most people coughed into the air or their hand. Conclusions Drying hands on dirty clothes, rags and lesos can compromise the benefits of handwashing. Coughing and sneezing in to an open hand can contribute to spread of disease as well. Understanding these practices can inform health promotion activities and campaigns for the prevention and control of diarrheal disease and influenza. PMID:24069302

A qualitative evaluation of hand drying practices among Kenyans.

PubMed

Person, Bobbie; Schilling, Katharine; Owuor, Mercy; Ogange, Lorraine; Quick, Rob

2013-01-01

Recommended disease prevention behaviors of hand washing, hygienic hand drying, and covering one's mouth and nose in a hygienic manner when coughing and sneezing appear to be simple behaviors but continue to be a challenge to successfully promote and sustain worldwide. We conducted a qualitative inquiry to better understand current hand drying behaviors associated with activities of daily living, and mouth and nose covering practices, among Kenyans. We conducted 7 focus group discussions; 30 in-depth interviews; 10 structured household observations; and 75 structured observations in public venues in the urban area of Kisumu; rural communities surrounding Kisumu; and a peri-urban area outside Nairobi, Kenya. Using a grounded theory approach, we transcribed and coded the narrative data followed by thematic analysis of the emergent themes. Hand drying, specifically on a clean towel, was not a common practice among our participants. Most women dried their hands on their waist cloth, called a leso, or their clothes whether they were cooking, eating or cleaning the nose of a young child. If men dried their hands, they used their trousers or a handkerchief. Children rarely dried their hands; they usually just wiped them on their clothes, shook them, or left them wet as they continued with their activities. Many people sneezed into their hands and wiped them on their clothes. Men and women used a handkerchief fairly often when they had a runny nose, cold, or the flu. Most people coughed into the air or their hand. Drying hands on dirty clothes, rags and lesos can compromise the benefits of handwashing. Coughing and sneezing in to an open hand can contribute to spread of disease as well. Understanding these practices can inform health promotion activities and campaigns for the prevention and control of diarrheal disease and influenza.

Hand anthropometry survey of rural farm workers in south-eastern Nigeria.

PubMed

Obi, Okey Francis

2016-04-01

The importance of hand anthropometry as it relates to design of hand tools particularly for farm workers have been established; however, anthropometric data for this group of agricultural workers have continued to remain scarce. A survey of hand anthropometry relevant in design of agricultural hand tools was carried out on 200 male and 100 female adult farm workers in south-eastern Nigeria. Comparison of the male and female data obtained showed that male dimensions were higher than that recorded for the females. The hand anthropometric data of the male and female farm workers were compared with that of other populations but no clear distinction was observed. It was however clear that the following hand dimensions, 2nd Joint to root digit 3 and width at tip digit 3 recorded for Nigerian farm workers were highest and lowest, respectively, compared to other populations. Practitioner Summary: Hand anthropometric data relevant in design of hand tools have continued to remain scarce particularly for farm workers. Hand anthropometry survey of farm workers carried out in south-eastern Nigeria revealed higher dimensions for males than females; however, no clear distinction was observed in comparison with other populations.

Mentor's hand hygiene practices influence student's hand hygiene rates.

PubMed

Snow, Michelle; White, George L; Alder, Stephen C; Stanford, Joseph B

2006-02-01

There were 3 objectives for this prospective quasiexperimental study. The first was to determine the effect of mentor's hand hygiene practices on student's hand hygiene rates during clinical rotations. The second was to assess the difference in hand hygiene rates for students with and without prior medical experience. The third was to assess the student's opinion and beliefs regarding hand hygiene. Sixty students enrolled in a certified nursing program were selected to participate in the study. Each study group was observed twice during the 30-day span. The first observational period was conducted on day 1 of clinical rotation. The second observational period was conducted on day 30 of clinical rotation. Students were observed for hand hygiene. Also assessed were medical experience, sex, gloving, age, and mentor's hand hygiene practices. After observational period 2, a brief questionnaire was given to students to determine their opinion and beliefs regarding hand hygiene. The questionnaire was divided into 5 sections: student's commitment to hand hygiene, their perception of hand hygiene inconvenience, the necessity of hand hygiene, the student's ability to perform hand hygiene, and their opinion on the frequency of medical staff's hand hygiene. The mentor's practice of hand hygiene was the strongest predictor of the student's rate of hand hygiene for both observational periods (P < .01). Furthermore, students without prior medical experience had a significant increase in hand hygiene rates when comparing observational period 1 to observational period 2 (P < .01). Glove usage was associated with increased hand hygiene rates by 50% during observational period 1 (P = .01) and 44% during observational period 2 (P < .01). Male students during observational period 1 practiced hand hygiene 30% less often than female students (P < .01); however, during observational period 2, there was no significant difference between hand hygiene rates for males and females (P = .82