A hazard control system for robot manipulators

NASA Technical Reports Server (NTRS)

Carter, Ruth Chiang; Rad, Adrian

1991-01-01

A robot for space applications will be required to complete a variety of tasks in an uncertain, harsh environment. This fact presents unusual and highly difficult challenges to ensuring the safety of astronauts and keeping the equipment they depend on from becoming damaged. The systematic approach being taken to control hazards that could result from introducing robotics technology in the space environment is described. First, system safety management and engineering principles, techniques, and requirements are discussed as they relate to Shuttle payload design and operation in general. The concepts of hazard, hazard category, and hazard control, as defined by the Shuttle payload safety requirements, is explained. Next, it is shown how these general safety management and engineering principles are being implemented on an actual project. An example is presented of a hazard control system for controlling one of the hazards identified for the Development Test Flight (DTF-1) of NASA's Flight Telerobotic Servicer, a teleoperated space robot. How these schemes can be applied to terrestrial robots is discussed as well. The same software monitoring and control approach will insure the safe operation of a slave manipulator under teleoperated or autonomous control in undersea, nuclear, or manufacturing applications where the manipulator is working in the vicinity of humans or critical hardware.

Hazard Analysis for Building 34 Vacuum Glove Box Assembly

NASA Technical Reports Server (NTRS)

Meginnis, Ian

2014-01-01

One of the characteristics of an effective safety program is the recognition and control of hazards before mishaps or failures occur. Conducting potentially hazardous tests necessitates a thorough hazard analysis in order to prevent injury to personnel, and to prevent damage to facilities and equipment. The primary purpose of this hazard analysis is to define and address the potential hazards and controls associated with the Building 34 Vacuum Glove Box Assembly, and to provide the applicable team of personnel with the documented results. It is imperative that each member of the team be familiar with the hazards and controls associated with his/her particular tasks, assignments and activities while interfacing with facility test systems, equipment and hardware. In fulfillment of the stated purposes, the goal of this hazard analysis is to identify all hazards that have the potential to harm personnel, damage the facility or its test systems or equipment, test articles, Government or personal property, or the environment. This analysis may also assess the significance and risk, when applicable, of lost test objectives when substantial monetary value is involved. The hazards, causes, controls, verifications, and risk assessment codes have been documented on the hazard analysis work sheets in Appendix A of this document. The preparation and development of this report is in accordance with JPR 1700.1, "JSC Safety and Health Handbook" and JSC 17773 Rev D "Instructions for Preparation of Hazard Analysis for JSC Ground Operations".

An organized approach to the control of hazards to health at work.

PubMed

Molyneux, M K; Wilson, H G

1990-04-01

Shell U.K. has an approach which facilitates the implementation of its occupational hygiene programme in its many locations. The main elements of the system are Company Policy, Standards, Methods and Management. The Policy sets the scene and is rigorous in its aims. The new COSHH legislation has emphasized particular duties which have influenced the approach. The Company Occupational Health Guidelines [Guidelines on Health at Work for Shell in the U.K. Shell U.K. Ltd, London (1989)] set the standards for control of exposure, among other things, and the Company adopts appropriate methods to achieve them. Of particular note is the Company's COSHH Programme [Implementation of the Shell U.K. Policy on the Control of Substances Hazardous to Health. Shell U.K. Ltd, London (1989)] which applies to all hazards to health (including physical and biological agents) in the workplace. Its introduction has been given full corporate support and is in the process of implementation. Appropriate procedures have been introduced for assessments of risk and for work histories. Guidance has been given on competence, reflecting a philosphy based on a team approach using local resources to the full, supported by corporate resources as required. The awards of the British Examining and Registration Board in Occupational Hygiene (1987) are used as the professional standard. Because of difficulties in obtaining basic hazard data, an internal core hazard data system (CHADS) [Core Hazard Data System. Shell U.K Ltd, London (1989)] has been introduced. The whole programme is managed through Occupational Hygiene Focal Points (OHFP) which represent local activities but also participate in corporate strategy. Through them the multidisciplinary approach is promoted, working in conjunction with local and sector Medical Advisers. Work done by the central Occupational Hygiene Unit is recorded and the reports are used for time management and recovery of costs. In its entirety, the approach is being used successfully to implement a comprehensive occupational hygiene programme in a diversified and dispersed industrial organization.

Why is weapons grade plutonium more hazardous to work with than highly enriched uranium?

DOE PAGES

Cournoyer, Michael E.; Costigan, Stephen A.; Schake, Bradley S.

2015-08-01

Highly Enriched Uranium and Weapons grade plutonium have assumed positions of dominant importance among the actinide elements because of their successful uses as explosive ingredients in nuclear weapons and the place they hold as key materials in the development of industrial use of nuclear power. While most chemists are familiar with the practical interest concerning HEU and WG Pu, fewer know the subtleties among their hazards. In this study, a primer is provided regarding the hazards associated with working with HEU and WG Pu metals and oxides. The care that must be taken to safely handle these materials is emphasizedmore » and the extent of the hazards is described. The controls needed to work with HEU and WG Pu metals and oxides are differentiated. Given the choice, one would rather work with HEU metal and oxides than WG Pu metal and oxides.« less

Why is weapons grade plutonium more hazardous to work with than highly enriched uranium?

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cournoyer, Michael E.; Costigan, Stephen A.; Schake, Bradley S.

Highly Enriched Uranium and Weapons grade plutonium have assumed positions of dominant importance among the actinide elements because of their successful uses as explosive ingredients in nuclear weapons and the place they hold as key materials in the development of industrial use of nuclear power. While most chemists are familiar with the practical interest concerning HEU and WG Pu, fewer know the subtleties among their hazards. In this study, a primer is provided regarding the hazards associated with working with HEU and WG Pu metals and oxides. The care that must be taken to safely handle these materials is emphasizedmore » and the extent of the hazards is described. The controls needed to work with HEU and WG Pu metals and oxides are differentiated. Given the choice, one would rather work with HEU metal and oxides than WG Pu metal and oxides.« less

3-D jobs and health disparities: The health implications of Latino chicken catchers' working conditions.

PubMed

Quandt, Sara A; Arcury-Quandt, Alice E; Lawlor, Emma J; Carrillo, Lourdes; Marín, Antonio J; Grzywacz, Joseph G; Arcury, Thomas A

2013-02-01

This study uses qualitative data to describe the tasks performed by chicken catchers, their organization of work, and possible health and safety hazards encountered. Twenty-one Latino immigrant chicken catchers for North Carolina poultry-processing plants were interviewed to obtain their perceptions of the job and its hazards. Interviews were recorded and transcribed (n = 10) or detailed notes recorded (n = 11). Transcripts and notes were subjected to qualitative analysis. Chicken catching takes place in a highly contaminated and hazardous work environment. The fast pace of work, low level of control over work intensity, and piece rate compensation all result in high potential for work-related injury and illness, including trauma, electrical shock, respiratory effects, musculoskeletal injuries, and drug use. Workers receive little safety or job training. Chicken catching is characterized by a work environment and organization of work that promote injury and illness. Copyright © 2012 Wiley Periodicals, Inc.

Hearing Conservation Self-Study #12350

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chochoms, Michael

Occupational hearing loss is one of the most common work-related illnesses in the United States (US). From 22 to 30 million US workers are exposed to hazardous noise levels at work, and 25% of these workers will develop permanent hearing loss. Hearing loss from noise is slow and painless, and you can have a disability before you notice it. This course presents the hazards associated with workplace noise, the purpose and elements of the Los Alamos National Laboratory (LANL) Hearing Conservation Program (HCP), and controls that are available to reduce your exposure to hazardous levels of noise.

Hearing Conservation Live #2430

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chochoms, Michael

Occupational hearing loss is one of the most common work-related illnesses in the United States (US). From 22 to 30 million US workers are exposed to hazardous noise levels at work, and 25% of these workers will develop permanent hearing loss. Hearing loss from noise is slow and painless, and you can have a disability before you notice it. This course presents the hazards associated with workplace noise, the purpose and elements of the Los Alamos National Laboratory (LANL) Hearing Conservation Program (HCP), and controls that are available to reduce your exposure to hazardous levels of noise.

Implementation of health and safety management system to reduce hazardous potential in PT.XYZ Indonesia

NASA Astrophysics Data System (ADS)

Widodo, L.; Adianto; Sartika, D. I.

2017-12-01

PT. XYZ is a large automotive manufacturing company that manufacture, assemble as well as a car exporter. The other products are spare parts, jig and dies. PT. XYZ has long been implementing the Occupational Safety and Health Management System (OSHMS) to reduce the potential hazards that cause work accidents. However, this does not mean that OSHMS that has been implemented does not need to be upgraded and improved. This is due to the potential danger caused by work is quite high. This research was conducted in Sunter 2 Plant where its production activities have a high level of potential hazard. Based on Hazard Identification risk assessment, Risk Assessment, and Risk Control (HIRARC) found 10 potential hazards in Plant Stamping Production, consisting of 4 very high risk potential hazards (E), 5 high risk potential hazards (H), and 1 moderate risk potential hazard (M). While in Plant Casting Production found 22 potential hazards findings consist of 7 very high risk potential hazards (E), 12 high risk potential hazards (H), and 3 medium risk potential hazards (M). Based on the result of Fault Tree Analysis (FTA), the main priority is the high risk potential hazards (H) and very high risk potential hazards (E). The proposed improvement are to make the visual display of the importance of always using the correct Personal Protective Equipment (PPE), establishing good working procedures, conducting OSH training for workers on a regular basis, and continuing to conduct safety campaigns.

User Acceptability of Physiological and Other Measures of Hazardous States of Awareness

NASA Technical Reports Server (NTRS)

Dickinson, Terry L.; Milkulka, Peter J.; Kwan, Doris; Fitzgibbons, Amy A.; Jinadu, Florence R.; Freeman, Frederick G.; Scerbo, Mark W.; Pope, A. T. (Technical Monitor)

2001-01-01

Two studies explored user acceptance of devices that measure hazardous states of awareness. In the first study, critical incident data were collected in two workshops from 11 operators working as air traffic controllers or commercial pilots. These critical incident data were used to develop a survey of the acceptability of awareness measures. In the second study, the survey was administered to 100 people also working as air traffic controllers or commercial pilots. Results show that operators are open to the inclusion of technology to measure HSAs even if that technology is somewhat invasive as long as feedback about the HSAs is considered to be useful and helpful. Nonetheless, a major concern is the legal complications associated with being recorded, particularly for older and more experienced operators. Air traffic controllers emphasized the importance of sharing technology information with supervisors in order to receive backup or assistance under conditions of task overload, whereas pilots emphasized the influence of work schedules on problems with awareness. Recommendations are offered concerning the implementation of devices to measure hazardous states of awareness.

Notification: FY 2012 Management Challenges and Internal Control Weaknesses for the Chemical Safety and Hazard Investigation Board

EPA Pesticide Factsheets

February 1, 2012. The EPA Office of Inspector General is beginning work to update our list of areas we consider to be the key management challenges confronting the Chemical Safety and Hazard Investigation Board.

Work environment and health promotion needs among personnel in the faculty of medicine, Thammasat university.

PubMed

Buranatrevedh, Surasak

2013-04-01

Work environment and health promotion needs are important factors for quality of life of workers. Study occupational health and safety hazards and control measures as well as health status and health promotion needs among personnel in Faculty of Medicine, Thammasat University. This was a cross sectional study. Questionnaires were designed to collect demographic data, health status, health promotion needs, occupational health and safety hazards, and job demand/control data. Questionnaires were sent out to 181 personnel and 145 were returned filled-out (80.1%). Among them, 42.8% had physical illness or stress, 68.3% had debt problem, 20% had some problems with coworker or work environment, 65.5% had a high workload, and 64.1% felt they did not get enough work benefits. Job demand and control factors included attention from leaders, fast-pace work, relationship among coworkers, repetitive work, hard work, high stress work, and high workload The occupational safety and health system included training to use new equipment, supervisor training, work skill training, work in sitting position for long period of time, appropriate periodic health exam, appropriate medical service, proper canteen, proper salary raise, and facilities for health promotion. In the occupational health hazards, employees were working in low temperature, bright light, and had a lack of health promotion programs. Requested programs to improve quality of life were Thai traditional massage, workplace improvement, health promotion, one-day travel, and Friday's happy and healthy program. Results from the present study can be used to improve workplace environment and health of personnel in the Faculty of Medicine, Thammasat University.

Work-related determinants of multi-site musculoskeletal pain among employees in the health care sector.

PubMed

Neupane, Subas; Nygård, Clas-Håkan; Oakman, Jodi

2016-06-16

Work-related musculoskeletal pain is a major occupational problem. Those with pain in multiple sites usually report worse health outcomes than those with pain in one site. This study explored prevalence and associated predictors of multi-site pain in health care sector employees. Survey responses from 1348 health care sector employees across three organisations (37% response rate) collected data on job satisfaction, work life balance, psychosocial and physical hazards, general health and work ability. Musculoskeletal discomfort was measured across 5 body regions with pain in ≥ 2 sites defined as multi-site pain. Generalized linear models were used to identify relationships between work-related factors and multi-site pain. Over 52% of the employees reported pain in multiple body sites and 19% reported pain in one site. Poor work life balance (PRR = 2.33, 95% CI = 1.06-5.14). physical (PRR = 7.58, 95% CI = 4.89-11.77) and psychosocial (PRR = 1.59, 95% CI = 1.00-2.57) hazard variables were related to multi-site pain (after controlling for age, gender, health and work ability. Older employees and females were more likely to report multi-site pain. Effective risk management of work related multi-site pain must include identification and control of psychosocial and physical hazards.

Occupational hazards to health of port workers.

PubMed

Wang, Yukun; Zhan, Shuifen; Liu, Yan; Li, Yan

2017-12-01

The aim of this article is to reduce the risk of occupational hazards and improve safety conditions by enhancing hazard knowledge and identification as well as improving safety behavior for freight port enterprises. In the article, occupational hazards to health and their prevention measures of freight port enterprises have been summarized through a lot of occupational health evaluation work, experience and understanding. Workers of freight port enterprises confront an equally wide variety of chemical, physical and psychological hazards in production technology, production environment and the course of labor. Such health hazards have been identified, the risks evaluated, the dangers to health notified and effective prevention measures which should be put in place to ensure the health of the port workers summarized. There is still a long way to go for the freight port enterprises to prevent and control the occupational hazards. Except for occupational hazards and their prevention measures, other factors that influence the health of port workers should also be paid attention to, such as age, work history, gender, contraindication and even the occurrence and development rules of occupational hazards in current production conditions.

Notification: Key Management Challenges Confronting the U.S. Chemical Safety and Hazard Investigation Board - FY2016

EPA Pesticide Factsheets

January 21, 2016. The EPA OIG is beginning work to update for fiscal year 2016 its list of proposed key management challenges and internal control weaknesses confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

OSHA safety requirements and the general duty clause.

PubMed

Mills, Anne C; Chillock, Cynthia A; Edelman, Harold; Mills, Shannon E

2005-03-01

Dental offices and clinics are subject to the same general safety requirements as other workplaces. Current guidelines, inspections, education, and training focus on infectious disease as the major workplace hazard for dental health care personnel (DHCP). However, the Occupational Safety and Health Administration has cited an increasing variety and number of general safety hazards during inspections of dental offices. A review of the general safety requirements for personal protective equipment and fire safety as they relate to DHCP follows. The authors discuss the responsibility of both employers and employees to perform workplace hazard evaluation and to implement education, engineering controls, and work practice controls to minimize their exposure to recognized and emerging workplace hazards.

30 CFR 48.28 - Annual refresher training of miners; minimum courses of instruction; hours of instruction.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Retraining of Miners Working at Surface Mines and Surface Areas of Underground Mines § 48.28 Annual refresher...) Ground control; working in areas of highwalls, water hazards, pits, and spoil banks; illumination and... ground control plans in effect at the mine; procedures for working safely in areas of highwalls, water...

Comparison of Methane Control Methods in Polish and Vietnamese Coal Mines

NASA Astrophysics Data System (ADS)

Borowski, Marek; Kuczera, Zbigniew

2018-03-01

Methane hazard often occurs in hard coal mines and causes very serious accidents and can be the reason of methane or methane and coal dust explosions. History of coal mining shows that methane released from the rock mass to the longwall area was responsible for numerous mining disasters. The main source of methane are coal deposits because it is autochthonous gas and is closely related with carbonification and forming of coal deposits. Degree of methane saturation in coal deposits depends on numerous factors; mainly on presence or lack of insulating layers in cover deposit that allow or do not on degasification and easily methane outflow into surroundings. Hence in coal mining there are coal deposits that contain only low degree of methane saturation in places where is lack of insulating layers till high in methane coal deposits occurring in insulating claystones or in shales. Conducting mining works in coal deposits of high methane hazard without using of special measures to combat (ventilation, methane drainage) could be impossible. Control of methane hazard depends also on other co-occuring natural dangers for which used preventive actions eliminate methane hazard. Safety in mines excavating coal deposits saturated with methane depends on the correct estimation of methane hazard, drawn up forecasts, conducted observations, hazard control as well as undertaken prevention measures. Methane risk prevention includes identification and control methods of methane hazards as well as means of combating the explosive accumulation of methane in longwall workings. The main preventive actions in underground coal mines are: effective ventilation that prevents forming of methane fuses or placed methane accumulation in headings ventilated by airflow created by main fans and in headings with auxiliary ventilation, methane drainage using drain holes that are drilled from underground headings or from the surface, methanometry control of methane concentration in the air; location of the sensors is defined by law, additional ventilation equipment used in places of lower intensity of ventilation and places where methane is concentrated.

Survey of occupational hazards in Minnesota veterinary practices in 2012.

PubMed

Fowler, Heather N; Holzbauer, Stacy M; Smith, Kirk E; Scheftel, Joni M

2016-01-15

To identify the scope of occupational hazards encountered by veterinary personnel and compare hazard exposures between veterinarians and technicians working in small and large animal practices. Cross-sectional survey. Licensed veterinarians and veterinary staff in Minnesota. A survey of Minnesota veterinary personnel was conducted between February 1 and December 1, 2012. Adult veterinary personnel working in clinical practice for > 12 months were eligible to participate. Information was collected on various workplace hazards as well as on workplace safety culture. 831 eligible people responded, representing approximately 10% of Minnesota veterinary personnel. A greater proportion of veterinarians (93%; 368/394) reported having received preexposure rabies vaccinations than did veterinary technicians (54%; 198/365). During their career, 226 (27%) respondents had acquired at least 1 zoonotic infection and 636 (77%) had been injured by a needle or other sharps. Recapping of needles was reported by 87% of respondents; the most common reason reported by veterinarians (41%; 142/345) and veterinary technicians (71%; 238/333) was being trained to do so at school or work. Recent feelings of depression were reported by 204 (25%) respondents. A greater proportion of technicians (42%; 155/365) than veterinarians (21%; 81/394) indicated working in an environment in which employees experienced some form of workplace abuse. Veterinary personnel in Minnesota were exposed to several work-related hazards. Practice staff should assess workplace hazards, implement controls, and incorporate instruction on occupational health into employee training.

Adaptive Interface Approach Using a Real Time Biocybernetic System: Control of Hazardous Awareness

NASA Technical Reports Server (NTRS)

Ray, William J.

2002-01-01

The focus of this current grant was to continue our work which focused on the manner in which psychophysiological markers can be used to index hazardous states of awareness and to explore the feasibility of developing on-line systems that utilize real time feedback to modify on-going behavioral processes. In this work we have incorporated a multifaceted approach which includes psychophysiological, subjective, and performance based measures. We have considered this from both an internal and external perspective as reflected in work from a variety of labs.

Occupational Hazard Exposures and Depressive Symptoms of Pregnant Workers.

PubMed

Yeh, Sherri S; Lee, Chien-Nan; Wu, Ying-Hsuan; Tu, Nai-Chi; Guo, Yue-Leon; Chen, Pau-Chung; Chen, Chi-Hsien

2018-03-01

The aim of this study was to explore the prevalence of exposure to occupational hazards and depressive mood with associated underlying risk factors among pregnant workers. Women at 12 weeks of gestation (n = 172) were recruited during regular prenatal screening. Data were obtained via questionnaires that explored job details and Edinburgh Postnatal Depression Scale. The most commonly encountered hazard was prolonged standing. The majority of women reported that the workplace provided no information on the safety or rights of pregnant women, but those exposed to at least four hazards had more access to such services (P < 0.05). Thirteen percent may have suffered from depressive symptomatology. Higher-level work-related burnout, lower job control, and reduced workplace support were significantly associated with possible antenatal depressive symptoms. Pregnant workers are exposed to substantial levels of occupational hazards and may experience depressive symptoms; thus, their work conditions require monitoring and improvement.

Controlling exposure to chemicals: a simple guide.

PubMed

Hay, Alastair

2006-09-01

Controlling exposure to chemicals in the workplace has been made easier by the use of a guide published by the U.K. Health and Safety Executive (HSE). Known as COSHH (Control of Substances Hazardous to Health Regulations) Essentials, the guide is a simple five-step procedure to devise appropriate control strategies to reduce exposures to various substances under different conditions. U.K. health and safety law requires risk assessments prior to use of hazardous substances and installation of appropriate control strategies before work commences. A 1996 survey of 1500 safety managers and trade union safety representatives revealed that the majority had little understanding of occupational safety limits for chemicals. Small- and medium-sized companies had little understanding of limits, and most could not develop control strategies. A new approach was required. COSHH Essentials is it. Developed over 3 years by a working group of hygienists and toxicologists representing HSE, industry, trade unions, and independent experts, the guide is now available in both paper-based and internet versions. It applies a hazard banding approach validated by data for 111 substances that have well-founded U.K. occupational exposure limits. New users select an appropriate hazard band for chemicals based on risk phrases. Details about dustiness for powders or volatility for liquids are inserted, and the guide allocates substances to one of four exposure bands linked, in turn, to specific control strategies. Now accessible through the HSE web site, COSHH Essentials will offer control strategies for both single chemicals and whole processes. To date over 300,000 risk assessments have been carried out using the internet version of COSHH Essentials.

Application of systems and control theory-based hazard analysis to radiation oncology.

PubMed

Pawlicki, Todd; Samost, Aubrey; Brown, Derek W; Manger, Ryan P; Kim, Gwe-Ya; Leveson, Nancy G

2016-03-01

Both humans and software are notoriously challenging to account for in traditional hazard analysis models. The purpose of this work is to investigate and demonstrate the application of a new, extended accident causality model, called systems theoretic accident model and processes (STAMP), to radiation oncology. Specifically, a hazard analysis technique based on STAMP, system-theoretic process analysis (STPA), is used to perform a hazard analysis. The STPA procedure starts with the definition of high-level accidents for radiation oncology at the medical center and the hazards leading to those accidents. From there, the hierarchical safety control structure of the radiation oncology clinic is modeled, i.e., the controls that are used to prevent accidents and provide effective treatment. Using STPA, unsafe control actions (behaviors) are identified that can lead to the hazards as well as causal scenarios that can lead to the identified unsafe control. This information can be used to eliminate or mitigate potential hazards. The STPA procedure is demonstrated on a new online adaptive cranial radiosurgery procedure that omits the CT simulation step and uses CBCT for localization, planning, and surface imaging system during treatment. The STPA procedure generated a comprehensive set of causal scenarios that are traced back to system hazards and accidents. Ten control loops were created for the new SRS procedure, which covered the areas of hospital and department management, treatment design and delivery, and vendor service. Eighty three unsafe control actions were identified as well as 472 causal scenarios that could lead to those unsafe control actions. STPA provides a method for understanding the role of management decisions and hospital operations on system safety and generating process design requirements to prevent hazards and accidents. The interaction of people, hardware, and software is highlighted. The method of STPA produces results that can be used to improve safety and prevent accidents and warrants further investigation.

Handling of hazardous drugs - Effect of an innovative teaching session for nursing students.

PubMed

Zimmer, Janine; Hartl, Stefanie; Standfuß, Katrin; Möhn, Till; Bertsche, Astrid; Frontini, Roberto; Neininger, Martina P; Bertsche, Thilo

2017-02-01

Imparting knowledge and practical skills in hazardous drug handling in nursing students' education is essential to prevent hazardous exposure and to preserve nurses' health. This study aimed at comparing routine nursing education with an additional innovative teaching session. A prospective controlled study in nursing students was conducted in two study periods: (i) a status-quo period (routine education on handling hazardous drugs) followed by (ii) an intervention period (additional innovative teaching session on handling hazardous drugs). Nursing students at a vocational school were invited to participate voluntarily. In both study periods (i) and (ii), the following factors were analysed: (a) knowledge of hazardous drug handling by questionnaire, (b) practical skills in hazardous drug handling (e.g. cleaning) by a simulated handling scenario, (c) contamination with drug residuals on the work surface by fluorescent imaging. Fifty-three nursing students were enrolled. (a) Median knowledge improved from status-quo (39% right answers) to intervention (65%, p<0.001), (b) practical skills improved from status-quo (53% of all participants cleaned the work surface) to intervention (92%, p<0.001). (c) Median number of particles/m 2 decreased from status-quo to intervention (932/97, p<0.001). Compared with routine education, knowledge and practical skills in hazardous drug handling were significantly improved after an innovative teaching session. Additionally, the amount of residuals on the work surface decreased. This indicates a lower risk for hazardous drug exposure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Voices from the bush: remote area nurses prioritise hazards that contribute to violence in their workplace.

PubMed

McCullough, K M; Williams, A M; Lenthall, S

2012-01-01

Remote Area Nurses (RANs) in Australia frequently encounter hazards that contribute to violence in the work place. Resources to deal with this problem are limited. Adopting a risk management approach and using the Delphi method, a panel of expert RANs (n=10) from geographically diverse communities across Australia, identified and prioritised hazards that increase the risk of violence to nurses. This descriptive study found that RANs encounter a wide variety of hazards from a variety of sources. Environmental hazards are complicated by living in remote areas and practicing in different locations. Relationships between the nurse and the community can be complex and lack of experience and organisational support may contribute to an increased risk of violence. Hazards prioritised as 'major' or 'extreme' risks included: clinic maintenance and security features, attending to patients at staff residences, RAN inexperience and lack of knowledge about the community, as well as intoxicated clients with mental health issues. A work culture that accepts verbal abuse as 'part of the job' was identified as a significant organisational risk to RANs. A lack of action from management when hazards are identified by clinic staff and insufficient recognition of the risk of violence by employers were also significant hazards. Further consideration of the hazards described in this study following the risk management process, may provide opportunities to reduce the risk of violence towards RANs. Proposed control measures should be developed in consultation with RANs and the remote communities they work in.

Survey of occupational hazards in Minnesota veterinary practices in 2012

PubMed Central

Fowler, Heather N.; Holzbauer, Stacy M.; Smith, Kirk E.; Scheftel, Joni M.

2017-01-01

OBJECTIVE To identify the scope of occupational hazards encountered by veterinary personnel and compare hazard exposures between veterinarians and technicians working in small and large animal practices. DESIGN Cross-sectional survey. POPULATION Licensed veterinarians and veterinary staff in Minnesota. PROCEDURES A survey of Minnesota veterinary personnel was conducted between February 1 and December 1, 2012. Adult veterinary personnel working in clinical practice for > 12 months were eligible to participate. Information was collected on various workplace hazards as well as on workplace safety culture. RESULTS 831 eligible people responded, representing approximately 10% of Minnesota veterinary personnel. A greater proportion of veterinarians (93%; 368/394) reported having received preexposure rabies vaccinations than did veterinary technicians (54%; 198/365). During their career, 226 (27%) respondents had acquired at least 1 zoonotic infection and 636 (77%) had been injured by a needle or other sharps. Recapping of needles was reported by 87% of respondents; the most common reason reported by veterinarians (41%; 142/345) and veterinary technicians (71%; 238/333) was being trained to do so at school or work. Recent feelings of depression were reported by 204 (25%) respondents. A greater proportion of technicians (42%; 155/365) than veterinarians (21%; 81/394) indicated working in an environment in which employees experienced some form of workplace abuse. CONCLUSIONS AND CLINICAL RELEVANCE Veterinary personnel in Minnesota were exposed to several work-related hazards. Practice staff should assess workplace hazards, implement controls, and incorporate instruction on occupational health into employee training. PMID:26720089

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand.

PubMed

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-11-25

We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills.

Job safety analysis and hazard identification for work accident prevention in para rubber wood sawmills in southern Thailand

PubMed Central

Thepaksorn, Phayong; Thongjerm, Supawan; Incharoen, Salee; Siriwong, Wattasit; Harada, Kouji; Koizumi, Akio

2017-01-01

Objective: We utilized job safety analysis (JSA) and hazard identification for work accident prevention in Para rubber wood sawmills, which aimed to investigate occupational health risk exposures and assess the health hazards at sawmills in the Trang Province, located in southern Thailand. Methods: We conducted a cross-sectional study which included a walk-through survey, JSA, occupational risk assessment, and environmental samplings from March through September 2015 at four Para rubber wood sawmills. Results: We identified potential occupational safety and health hazards associated with six main processes, including: 1) logging and cutting, 2) sawing the lumber into sheets, 3) planing and re-arranging, 4) vacuuming and wood preservation, 5) drying and planks re-arranging, and 6) grading, packing, and storing. Working in sawmills was associated with high risk of wood dust and noise exposure, occupational accidents injuring hands and feet, chemicals and fungicide exposure, and injury due to poor ergonomics or repetitive work. Discussion: Several high-risk areas were identified from JSA and hazard identification of the working processes, especially high wood dust and noise exposure when sawing lumber into sheets and risk of occupational accidents of the hands and feet when struck by lumber. All workers were strongly recommended to use personal protective equipment in any working processes. Exposures should be controlled using local ventilation systems and reducing noise transmission. We recommend that the results from the risk assessment performed in this study be used to create an action plan for reducing occupational health hazards in Para rubber sawmills. PMID:28993571

A survey of environmental and occupational work practices in the automotive refinishing industry of a developing country: Sonora, Mexico.

PubMed

Velázquez, Luis; Bello, Dhimiter; Munguia, Nora; Zavala, Andrea; Marin, Amina; Moure-Eraso, Rafael

2008-01-01

The automotive repair and refinishing industry has been studied intensively in industrialized countries, in part due to use of hazardous chemicals such as isocyanates and solvents, but little is known about industry practices in the developing world. The main objective of this paper was to investigate environmental and occupational work practices of this industry in a developing region, Sonora, Mexico. An integrated survey approach maximizes the opportunity for identifying risks as well as reducing risks. This investigation included detailed workplace visits to 41 body shops and 6 paint suppliers, as well as a survey of shop owners and 24 workers. Information was collected on work practices, level of technology in the shops, use of personal protective equipment, consumption and handling of hazardous chemicals and waste, hazard communication, and environmental consciousness. Most shops had little capital, outdated technology for exposure control, poor working conditions, high potential for exposure to hazardous chemicals, and little awareness of environmental and occupational health and safety. We concluded that work practices in the Sonoran auto refinishing industry are unsustainable and may pose a health risk to workers and the environment.

[Powdered infant formulae preparation guide for hospitals based on Hazard Analysis and Critical Control Points (HACCP) principles].

PubMed

Vargas-Leguás, H; Rodríguez Garrido, V; Lorite Cuenca, R; Pérez-Portabella, C; Redecillas Ferreiro, S; Campins Martí, M

2009-06-01

This guide for the preparation of powdered infant formulae in hospital environments is a collaborative work between several hospital services and is based on national and European regulations, international experts meetings and the recommendations of scientific societies. This guide also uses the Hazard Analysis and Critical Control Point principles proposed by Codex Alimentarius and emphasises effective verifying measures, microbiological controls of the process and the corrective actions when monitoring indicates that a critical control point is not under control. It is a dynamic guide and specifies the evaluation procedures that allow it to be constantly adapted.

RCT: Module 2.11, Radiological Work Coverage, Course 8777

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hillmer, Kurt T.

2017-07-20

Radiological work is usually approved and controlled by radiation protection personnel by using administrative and procedural controls, such as radiological work permits (RWPs). In addition, some jobs will require working in, or will have the potential for creating, very high radiation, contamination, or airborne radioactivity areas. Radiological control technicians (RCTs) providing job coverage have an integral role in controlling radiological hazards. This course will prepare the student with the skills necessary for RCT qualification by passing quizzes, tests, and the RCT Comprehensive Phase 1, Unit 2 Examination (TEST 27566) and will provide in-the-field skills.

Psychosocial factors and shoulder symptom development among workers.

PubMed

Smith, Caroline K; Silverstein, Barbara A; Fan, Z Joyce; Bao, Stephen; Johnson, Peter W

2009-01-01

Shoulder injuries are a common cause of pain and discomfort. Many work-related factors have been associated with the onset of shoulder symptoms. The psychosocial concepts in the demand-control model have been studied in association with musculoskeletal symptoms but with heterogeneous findings. The purpose of this study was to assess the relationship between the psychosocial concepts of the demand-control model and the incidence of shoulder symptoms in a working population. After following 424 subjects for approximately 1 year, 85 incident cases were identified from self-reported data. Cox proportional hazards modeling was used to assess the associations between shoulder symptoms and demand-control model quadrants. Cases were more likely to be female and report other upper extremity symptoms at baseline (P < 0.05). From the hazard models, being in either a passive or high strain job quadrant was associated with the incidence of shoulder symptoms. Hazard ratios were 2.17, 95% CI 1.02-4.66 and 2.19, 95% CI 1.08-4.42, respectively. Using self-reporting to determine demand-control quadrants was successful in identifying subjects at risk of developing work-related shoulder symptoms. Research is needed to determine if this relationship holds with clinically diagnosed shoulder and other upper extremity musculoskeletal disorders. This may be part of a simple tool for assessing risk of developing these UEMSDs. (c) 2008 Wiley-Liss, Inc.

Relationships of job hazards, lack of knowledge, alcohol use, health status and risk taking behavior to work injury of coal miners: a case-control study in India.

PubMed

Kunar, Bijay Mihir; Bhattacherjee, Ashis; Chau, Nearkasen

2008-01-01

Objective is to assess the relationships of job hazards, individual characteristics, and risk taking behavior to occupational injuries of coal miners. This case-control study compared 245 male underground coal miners with injury during the previous two-year period with 330 matched controls without injury during the previous five years. Data were collected via face-to-face interview and analyzed using the conditional logistic model. Handling material, poor environmental/working conditions, and geological/strata control- related hazards were the main risk factors: adjusted ORs 5.15 (95% CI 2.42-10.9), 2.40 (95% CI 1.29-4.47), and 2.25 (95% CI 1.24-4.07) respectively. Their roles were higher among the face-workers than among the non-face-workers. No formal education, alcohol consumption, disease, big-family, and risk-taking behavior were associated with injuries (2.36

Hazard Identification, Risk Assessment, and Control Measures as an Effective Tool of Occupational Health Assessment of Hazardous Process in an Iron Ore Pelletizing Industry.

PubMed

Rout, B K; Sikdar, B K

2017-01-01

With the growing numbers of iron ore pelletization industries in India, various impacts on environment and health in relation to the workplace will rise. Therefore, understanding the hazardous process is crucial in the development of effective control measures. Hazard Identification, Risk Assessment, and Control measures (HIRAC) acts as an effective tool of Occupational Health Assessment. The aim of the study was to identify all the possible hazards at different workplaces of an iron ore pelletizing industry, to conduct an occupational health risk assessment, to calculate the risk rating based on the risk matrix, and to compare the risk rating before and after the control measures. The research was a cross-sectional study done from March to December 2015 in an iron ore pelletizing industry located in Odisha, India. Data from the survey were collected by inspecting the workplace, responses of employees regarding possible hazards in their workplace, reviewing department procedure manual, work instructions, standard operating procedure, previous incident reports, material safety data sheet, first aid/injury register, and health record of employees. A total of 116 hazards were identified. Results of the paired-sample's t -test showed that mean risk rating differs before taking control measures (M = 9.13, SD = 5.99) and after taking control measures (M = 2.80, SD = 1.38) at the 0.0001 level of significance ( t = 12.6428, df = 115, N = 116, P < 0.0001, 95% CI for mean difference 5.34 to 7.32). On an average, risk reduction was about 6.33 points lower after taking control measures. The hazards having high-risk rating and above were reduced to a level considered As Low as Reasonably Practicable (ALARP) when the control measures were applied, thereby reducing the occurrence of injury or disease in the workplace.

WE-G-BRA-06: Application of Systems and Control Theory-Based Hazard Analysis to Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pawlicki, T; Samost, A; Leveson, N

Purpose: The process of delivering radiation occurs in a complex socio-technical system heavily reliant on human operators. Furthermore, both humans and software are notoriously challenging to account for in traditional hazard analysis models. High reliability industries such as aviation have approached this problem through using hazard analysis techniques grounded in systems and control theory. The purpose of this work is to apply the Systems Theoretic Accident Model Processes (STAMP) hazard model to radiotherapy. In particular, the System-Theoretic Process Analysis (STPA) approach is used to perform a hazard analysis of a proposed on-line adaptive cranial radiosurgery procedure that omits the CTmore » Simulation step and uses only CBCT for planning, localization, and treatment. Methods: The STPA procedure first requires the definition of high-level accidents and hazards leading to those accidents. From there, hierarchical control structures were created followed by the identification and description of control actions for each control structure. Utilizing these control structures, unsafe states of each control action were created. Scenarios contributing to unsafe control action states were then identified and translated into system requirements to constrain process behavior within safe boundaries. Results: Ten control structures were created for this new CBCT-only process which covered the areas of hospital and department management, treatment design and delivery, and vendor service. Twenty three control actions were identified that contributed to over 80 unsafe states of those control actions resulting in over 220 failure scenarios. Conclusion: The interaction of people, hardware, and software are highlighted through the STPA approach. STPA provides a hierarchical model for understanding the role of management decisions in impacting system safety so that a process design requirement can be traced back to the hazard and accident that it is intended to mitigate. Varian Medical Systems, Inc.« less

Notification: FY 2018 CSB Management Challenges and Internal Control Weaknesses

EPA Pesticide Factsheets

December 26, 2017. The OIG is beginning work to update for fiscal year 2018 its list of proposed key management challenges and internal control weaknesses confronting the U.S. Chemical Safety and Hazard Investigation Board (CSB).

Hazard Management with DOORS: Rail Infrastructure Projects

NASA Astrophysics Data System (ADS)

Hughes, Dave; Saeed, Amer

LOI is a major rail infrastructure project that will contribute to a modernised transport system in time for the 2012 Olympic Games. A review of the procedures and tool infrastructure was conducted in early 2006, coinciding with a planned move to main works. A hazard log support tool was needed to provide: an automatic audit trial, version control and support collaborative working. A DOORS based Hazard Log (DHL) was selected as the Tool Strategy. A systematic approach was followed for the development of DHL, after a series of tests and acceptance gateways, DHL was handed over to the project in autumn 2006. The first few months were used for operational trials and he Hazard Management rocedure was modified to be a hybrid approach that used the strengths of DHL and Excel. The user experience in the deployment of DHL is summarised and directions for future improvement identified.

Hazard Identification and Risk Assessment in Water Treatment Plant considering Environmental Health and Safety Practice

NASA Astrophysics Data System (ADS)

Falakh, Fajrul; Setiani, Onny

2018-02-01

Water Treatment Plant (WTP) is an important infrastructure to ensure human health and the environment. In its development, aspects of environmental safety and health are of concern. This paper case study was conducted at the Water Treatment Plant Company in Semarang, Central Java, Indonesia. Hazard identification and risk assessment is one part of the occupational safety and health program at the risk management stage. The purpose of this study was to identify potential hazards using hazard identification methods and risk assessment methods. Risk assessment is done using criteria of severity and probability of accident. The results obtained from this risk assessment are 22 potential hazards present in the water purification process. Extreme categories that exist in the risk assessment are leakage of chlorine and industrial fires. Chlorine and fire leakage gets the highest value because its impact threatens many things, such as industrial disasters that could endanger human life and the environment. Control measures undertaken to avoid potential hazards are to apply the use of personal protective equipment, but management will also be better managed in accordance with hazard control hazards, occupational safety and health programs such as issuing work permits, emergency response training is required, Very useful in overcoming potential hazards that have been determined.

Application of a Novel Liquid Nitrogen Control Technique for Heat Stress and Fire Prevention in Underground Mines.

PubMed

Shi, Bobo; Ma, Lingjun; Dong, Wei; Zhou, Fubao

2015-01-01

With the continually increasing mining depths, heat stress and spontaneous combustion hazards in high-temperature mines are becoming increasingly severe. Mining production risks from natural hazards and exposures to hot and humid environments can cause occupational diseases and other work-related injuries. Liquid nitrogen injection, an engineering control developed to reduce heat stress and spontaneous combustion hazards in mines, was successfully utilized for environmental cooling and combustion prevention in an underground mining site named "Y120205 Working Face" (Y120205 mine) of Yangchangwan colliery. Both localized humidities and temperatures within the Y120205 mine decreased significantly with liquid nitrogen injection. The maximum percentage drop in temperature and humidity of the Y120205 mine were 21.9% and 10.8%, respectively. The liquid nitrogen injection system has the advantages of economical price, process simplicity, energy savings and emission reduction. The optimized heat exchanger used in the liquid nitrogen injection process achieved superior air-cooling results, resulting in considerable economic benefits.

The risk of occupational injury increased according to severity of noise exposure after controlling for occupational environment status in Korea.

PubMed

Yoon, Jin-Ha; Roh, Jaehoon; Kim, Chi-Nyon; Won, Jong-Uk

2016-01-01

The aim of this study was to examine the relationship between noise exposure and risk of occupational injury. Korean National Health and Nutrition Examination Survey was used for the current study. Self-report questionnaires were used to investigate occupational injury and exposure to noise, chemicals, and machines and equipments. In separate analyses for occupation and occupational hazard, the proportion of occupational injuries increased according to severity of noise exposure (all P < 0.05). Compared to the non-exposure group, the respective odds ratio (95% confidence intervals) for occupational injury was 1.39 (1.07-1.80) and 1.67 (1.13-2.46) in the mild and severe noise exposure groups, after controlling for age, gender, sleep hours, work schedule (shift work), and exposure status to hazardous chemicals and hazardous machines and equipments. The current study highlights the association between noise exposure and risk of occupational injury. Furthermore, risk of occupational injury increased according to severity of noise exposure.

46 CFR 194.15-1 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemistry Laboratory and Scientific Laboratory § 194.15-1 General..., such as desks, file and storage cabinets, waste paper baskets, work benches, chair frames, etc. Working...

46 CFR 194.15-1 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemistry Laboratory and Scientific Laboratory § 194.15-1 General..., such as desks, file and storage cabinets, waste paper baskets, work benches, chair frames, etc. Working...

46 CFR 194.15-1 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., DEPARTMENT OF HOMELAND SECURITY (CONTINUED) OCEANOGRAPHIC RESEARCH VESSELS HANDLING, USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemistry Laboratory and Scientific Laboratory § 194.15-1 General..., such as desks, file and storage cabinets, waste paper baskets, work benches, chair frames, etc. Working...

Workplace characteristics and work disability onset for men and women.

PubMed

Crimmins, Eileen M; Hayward, Mark D

2004-01-01

This paper investigates the association between job characteristics and work disability among men and women in older working ages in the United States. We examine whether the association persists when controlling for major chronic disease experience. We also address whether job characteristics are ultimately associated with the receipt of disability benefits. Data are from the Health and Retirement Survey and are nationally representative of noninstitutionalized persons 51-61 in 1992. Disability onset is estimated using a hazard modeling approach for those working at wave 1 (N = 5,999). A logistic regression analysis of disability benefits is based on a risk set of 525 persons who become work-disabled before the second interview. Women's disability onset and health problems appear less related to job characteristics than men's. For men, work disability is associated with stressful jobs, lack of job control, and environmentally hazardous conditions but is not associated with physical demands. Participation in disability benefit programs among those with work disability is unrelated to most job characteristics or health conditions. Understanding of the differing process to work disability for men and women and the relationship between work and health by gender is important for current policy development.

Endangering women's health for profit: health and safety in Mexico's maquiladoras.

PubMed

Abell, H

1999-11-01

This article focuses on the situation of women in Mexico's maquiladoras (assembly plants). There are approximately 1 million Mexicans working in over 4000 maquiladoras in which violations of worker's human, labor, and health rights exist. The specific dangers of work in maquiladoras and the double burden of domestic and factory work that women already bear all contribute to a wide range of health hazards for women. These workplace hazards include toxic chemicals, unsafe equipment, poor workstation design, and excessive heat or cold, poor ventilation and lighting, harmful noise levels, and dangerously high production quotas. Since most maquiladoras illegally dump hazardous waste and spew contaminants into the surrounding environment, residents of maquiladora communities are exposed to additional health hazards simply because they live near the plants. In response to this problem, workers have organized themselves into community-based groups and democratic unions. The need for worker-controlled organizations was emphasized because workers who are organized have greater possibilities of addressing their concerns about health, safety, wages, and job security than those who are not.

Some health effects of aircraft noise with special reference to shift work.

PubMed

Rizk, Sanaa A M; Sharaf, Nevin E; Mahdy-Abdallah, Heba; ElGelil, Khalid S Abd

2016-06-01

Aircraft noise is an environmental stressor. A positive relationship exists between noise and high blood pressure. Shift work is an additional hazardous working condition with negative effect on the behavior attitude of workers. This study aimed at investigating some health hazards for shift work on workers at Cairo International Airport (CIA), Egypt, as a strategic work place, with more than one stressor. Assessment of noise effects were carried out in four working sites at the airport besides control sites. The average noise level in the exposure sites was 106.5 dB compared with 54 dB at the control sites. The study comprised a group of 200 male workers exposed to aircraft noise and 110 male workers not exposed to noise as control group. All workers had full general medical examination after filling specially formulated questionnaire. Hearing impairment, raised blood pressure, headaches, disturbed sleep, and symptoms of anxiety were more prominent among the exposed workers than the control. Symptoms of upper respiratory tract were reported among night shifters of both groups with high tendency for smoking. Thus, night-shift workers at CIA work under more than one stressor. Hypertension and smoking might act as intermediate factors on the causal pathway of complaints, making aircraft noise and night shift acting as two synergistic stressors. Airport workers are in need for aggressive hearing conservation programs. Organization of the working hours schedule is mandatory to avoid excessive noise exposure. © The Author(s) 2014.

Use of personal protective equipment for respiratory protection.

PubMed

Sargent, Edward V; Gallo, Frank

2003-01-01

Management of hazards in biomedical research facilities requires the application of the traditional industrial hygiene responsibilities of anticipation, recognition, evaluation, and control to characterize the work environment, evaluate tasks and equipment, identify hazards, define exposure groups, and recommend controls. Generally, the diversity and unique characteristics of hazards faced by laboratory and animal facility employees and the short-term and low-level nature of the exposures factor into the selection of proper exposure control measures in the laboratory. The proper selection of control measures is based on a hierarchy of elimination and minimization by engineering controls, followed last by personal protective equipment when exposures cannot be eliminated. Once it is decided that personal protective equipment is needed, specific regulations and guidelines define safety standards for research facilities, including the elements of a sound respiratory protection program. These elements include respirator selection (including appropriate protection factors), medical evaluation, fit testing, training, inspection, maintenance and care, quality, quantity and flow of breathing air, and routine and emergency use procedures.

Wireless "Jump" Starts for Partly Disabled Equipment

NASA Technical Reports Server (NTRS)

Castle, K. D.

1986-01-01

Equipment activated when normal remote starting does not work Beam from nearby station first carries raw energy and then subsystemactivating signals to equipment crippled by discharged storage batteries. Operators start up equipment without approaching it under hazardous conditions. Potential terrestrial applications for scheme include starting of robots on such remotely-controlled hazardous tasks as handling of explosives or retrieval or deposition of objects in hostile environments.

The reactive bed plasma system for contamination control

NASA Technical Reports Server (NTRS)

Birmingham, Joseph G.; Moore, Robert R.; Perry, Tony R.

1990-01-01

The contamination control capabilities of the Reactive Bed Plasma (RBP) system is described by delineating the results of toxic chemical composition studies, aerosol filtration work, and other testing. The RBP system has demonstrated its capabilities to decompose toxic materials and process hazardous aerosols. The post-treatment requirements for the reaction products have possible solutions. Although additional work is required to meet NASA requirements, the RBP may be able to meet contamination control problems aboard the Space Station.

Remotely controlled sensor apparatus for use in dig-face characterization system

DOEpatents

Josten, N.E.; Svoboda, J.M.

1999-05-25

A remotely controlled sensor platform apparatus useful in a dig-face characterization system is deployed from a mobile delivery device such as standard heavy construction equipment. The sensor apparatus is designed to stabilize sensors against extraneous motions induced by heavy equipment manipulations or other outside influences, and includes a terrain sensing and sensor elevation control system to maintain the sensors in close ground proximity. The deployed sensor apparatus is particularly useful in collecting data in work environments where human access is difficult due to the presence of hazardous conditions, rough terrain, or other circumstances that prevent efficient data collection by conventional methods. Such work environments include hazardous waste sites, unexploded ordnance sites, or construction sites. Data collection in these environments by utilizing the deployed sensor apparatus is desirable in order to protect human health and safety, or to assist in planning daily operations to increase efficiency. 13 figs.

Remotely controlled sensor apparatus for use in dig-face characterization system

DOEpatents

Josten, Nicholas E.; Svoboda, John M.

1999-01-01

A remotely controlled sensor platform apparatus useful in a dig-face characterization system is deployed from a mobile delivery device such as standard heavy construction equipment. The sensor apparatus is designed to stabilize sensors against extraneous motions induced by heavy equipment manipulations or other outside influences, and includes a terrain sensing and sensor elevation control system to maintain the sensors in close ground proximity. The deployed sensor apparatus is particularly useful in collecting data in work environments where human access is difficult due to the presence of hazardous conditions, rough terrain, or other circumstances that prevent efficient data collection by conventional methods. Such work environments include hazardous waste sites, unexploded ordnance sites, or construction sites. Data collection in these environments by utilizing the deployed sensor apparatus is desirable in order to protect human health and safety, or to assist in planning daily operations to increase efficiency.

Understanding Risk Tolerance and Building an Effective Safety Culture

NASA Technical Reports Server (NTRS)

Loyd, David

2018-01-01

Estimates range from 65-90 percent of catastrophic mishaps are due to human error. NASA's human factors-related mishaps causes are estimated at approximately 75 percent. As much as we'd like to error-proof our work environment, even the most automated and complex technical endeavors require human interaction... and are vulnerable to human frailty. Industry and government are focusing not only on human factors integration into hazardous work environments, but also looking for practical approaches to cultivating a strong Safety Culture that diminishes risk. Industry and government organizations have recognized the value of monitoring leading indicators to identify potential risk vulnerabilities. NASA has adapted this approach to assess risk controls associated with hazardous, critical, and complex facilities. NASA's facility risk assessments integrate commercial loss control, OSHA (Occupational Safety and Health Administration) Process Safety, API (American Petroleum Institute) Performance Indicator Standard, and NASA Operational Readiness Inspection concepts to identify risk control vulnerabilities.

Occupational hazards among the abattoir workers associated with noncompliance to the meat processing and waste disposal laws in Malaysia

PubMed Central

Abdullahi, Auwalu; Hassan, Azmi; Kadarman, Norizhar; Junaidu, Yakubu Muhammad; Adeyemo, Olanike Kudrat; Lua, Pei Lin

2016-01-01

Purpose This study aims to investigate the occupational hazards among the abattoir workers associated with noncompliance to the meat processing and waste disposal laws in Terengganu State, Malaysia. Occupational hazards are the major source of morbidity and mortality among the animal workers due to exposure to many hazardous situations in their daily practices. Occupational infections mostly contracted by abattoir workers could be caused by iatrogenic or transmissible agents, including viruses, bacteria, fungi, and parasites and the toxins produced by these organisms. Materials and methods The methodology was based on a cross-sectional survey using cluster sampling technique in the four districts of Terengganu State, Malaysia. One hundred and twenty-one abattoir workers from five abattoirs were assessed using a validated structured questionnaire and an observation checklist. Results The mean and standard deviation of occupational hazards scores of the workers were 2.32 (2.721). Physical, chemical, biological, psychosocial, musculoskeletal, and ergonomics hazards were the major findings of this study. However, the highest prevalence of occupational hazards identified among the workers was injury by sharp equipment such as a knife (20.0%), noise exposure (17.0%), and due to offensive odor within the abattoir premises (12.0%). Conclusion The major occupational hazards encountered by the workers in the study area were physical, chemical, biological, psychosocial, musculoskeletal, and ergonomics hazards. To ensure proper control of occupational health hazards among the abattoir workers, standard design and good environmental hygiene must be taken into consideration all the time. Exposure control plan, which includes risk identification, risk characterization, assessment of workers at risk, risk control, workers’ education/training, and implementation of safe work procedures, should be implemented by the government and all the existing laws governing the abattoir operation in the country should be enforced. PMID:27471416

Using human factors engineering to improve patient safety in the cardiovascular operating room.

PubMed

Gurses, Ayse P; Martinez, Elizabeth A; Bauer, Laura; Kim, George; Lubomski, Lisa H; Marsteller, Jill A; Pennathur, Priyadarshini R; Goeschel, Chris; Pronovost, Peter J; Thompson, David

2012-01-01

Despite significant medical advances, cardiac surgery remains a high risk procedure. Sub-optimal work system design characteristics can contribute to the risks associated with cardiac surgery. However, hazards due to work system characteristics have not been identified in the cardiovascular operating room (CVOR) in sufficient detail to guide improvement efforts. The purpose of this study was to identify and categorize hazards (anything that has the potential to cause a preventable adverse patient safety event) in the CVOR. An interdisciplinary research team used prospective hazard identification methods including direct observations, contextual inquiry, and photographing to collect data in 5 hospitals for a total 22 cardiac surgeries. We performed thematic analysis of the qualitative data guided by a work system model. 60 categories of hazards such as practice variations, high workload, non-compliance with evidence-based guidelines, not including clinicians' in medical device purchasing decisions were found. Results indicated that hazards are common in cardiac surgery and should be eliminated or mitigated to improve patient safety. To improve patient safety in the CVOR, efforts should focus on creating a culture of safety, increasing compliance with evidence based infection control practices, improving communication and teamwork, and designing better tools and technologies through partnership among all stakeholders.

40 CFR 63.1654 - Operational and work practice standards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... according to a written fugitive dust control plan must be incorporated in the operating permit for the... 40 Protection of Environment 13 2013-07-01 2012-07-01 true Operational and work practice standards... PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES...

Engineered Nanomaterials, Sexy New Technology and Potential Hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beaulieu, R A

Engineered nanomaterials enhance exciting new applications that can greatly benefit society in areas of cancer treatments, solar energy, energy storage, and water purification. While nanotechnology shows incredible promise in these and other areas by exploiting nanomaterials unique properties, these same properties can potentially cause adverse health effects to workers who may be exposed during work. Dispersed nanoparticles in air can cause adverse health effects to animals not merely due to their chemical properties but due to their size, structure, shape, surface chemistry, solubility, carcinogenicity, reproductive toxicity, mutagenicity, dermal toxicity, and parent material toxicity. Nanoparticles have a greater likelihood of lungmore » deposition and blood absorption than larger particles due to their size. Nanomaterials can also pose physical hazards due to their unusually high reactivity, which makes them useful as catalysts, but has the potential to cause fires and explosions. Characterization of the hazards (and potential for exposures) associated with nanomaterial development and incorporation in other products is an essential step in the development of nanotechnologies. Developing controls for these hazards are equally important. Engineered controls should be integrated into nanomaterial manufacturing process design according to 10CFR851, DOE Policy 456.1, and DOE Notice 456.1 as safety-related hardware or administrative controls for worker safety. Nanomaterial hazards in a nuclear facility must also meet control requirements per DOE standards 3009, 1189, and 1186. Integration of safe designs into manufacturing processes for new applications concurrent with the developing technology is essential for worker safety. This paper presents a discussion of nanotechnology, nanomaterial properties/hazards and controls.« less

The long-term mortality impact of combined job strain and family circumstances: A life course analysis of working American mothers.

PubMed

Sabbath, Erika L; Mejía-Guevara, Iván; Noelke, Clemens; Berkman, Lisa F

2015-12-01

Work stress and family composition have been separately linked with later-life mortality among working women, but it is not known how combinations of these exposures impact mortality, particularly when exposure is assessed cumulatively over the life course. We tested whether, among US women, lifelong work stress and lifelong family circumstances would jointly predict mortality risk. We studied formerly working mothers in the US Health and Retirement Study (HRS) born 1924-1957 (n = 7352). We used sequence analysis to determine five prototypical trajectories of marriage and parenthood in our sample. Using detailed information on occupation and industry of each woman's longest-held job, we assigned each respondent a score for job control and job demands. We calculated age-standardized mortality rates by combined job demands, job control, and family status, then modeled hazard ratios for death based on family constellation, job control tertiles, and their combination. Married women who had children later in life had the lowest mortality risks (93/1000). The highest-risk family clusters were characterized by spells of single motherhood (132/1000). Generally, we observed linear relationships between job control and mortality hazard within each family trajectory. But while mortality risk was high for all long-term single mothers, we did not observe a job control-mortality gradient in this group. The highest-mortality subgroup was previously married women who became single mothers later in life and had low job control (HR 1.91, 95% CI 1.38,2.63). Studies of associations between psychosocial work characteristics and health might consider heterogeneity of effects by family circumstances. Worksite interventions simultaneously considering both work and family characteristics may be most effective in reducing health risks. Copyright © 2015 Elsevier Ltd. All rights reserved.

The long-term mortality impact of combined job strain and family circumstances: A life course analysis of working American mothers

PubMed Central

Sabbath, Erika L.; Mejía-Guevara, Iván; Noelke, Clemens; Berkman, Lisa F.

2015-01-01

Background Work stress and family composition have been separately linked to later-life mortality among working women, but it is not known how combinations of these exposures impact mortality, particularly when exposure is assessed cumulatively over the life course. We tested whether, among US women, lifelong work stress and lifelong family circumstances would jointly predict mortality risk. Procedures We studied formerly working mothers in the US Health and Retirement Study (HRS) born 1924-1957 (n=7,352). We used sequence analysis to determine five prototypical trajectories of marriage and parenthood in our sample. Using detailed information on occupation and industry of each woman’s longest-held job, we assigned each respondent a score for job control and job demands. We calculated age-standardized mortality rates by combined job demands, job control, and family status, then modeled hazard ratios for death based on family constellation, job control tertiles, and their combination. Results Married women who had children later in life had the lowest mortality risks (93/1,000). The highest-risk family clusters were characterized by spells of single motherhood (132/1,000). Generally, we observed linear relationships between job control and mortality hazard within each family trajectory. But while mortality risk was high for all long-term single mothers, we did not observe a job control-mortality gradient in this group. The highest-mortality subgroup was previously married women who became single mothers later in life and had low job control (HR 1.91, 95% CI 1.38,2.63). Practical implications Studies of associations between psychosocial work characteristics and health might consider heterogeneity of effects by family circumstances. Worksite interventions simultaneously considering both work and family characteristics may be most effective in reducing health risks. PMID:26513120

Control technology assessment of hazardous waste disposal operations in chemicals manufacturing: walk-through survey report of E. I. Du Pont de Nemours and Company, Chambers Works, Deepwater, New Jersey

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anastas, M.

1984-01-01

A walk through survey was conducted to assess control technology for hazardous wastes disposal operations at du Pont de Nemours and Company (SIC-2800), Deepwater, New Jersey in November 1981. Hazardous wastes generated at the facility were disposed of by incineration, wastewater and thermal treatment, and landfilling. Engineering controls for the incineration process and at the landfill were noted. At the landfill, water from a tank trailer was sprayed periodically to suppress dust generation. Vapor control devices, such as spot scrubbers, were used during transfer of organic wastes from trailers and drums to storage prior to incineration. Wastes were also recirculatedmore » to prevent build up of grit in the strainers. The company conducted area monitoring for nitrobenzene (98953) and amines at the landfill and personal monitoring for chloramines at the incinerator. Half mask dust respirators were worn by landfill operators. Operators who unloaded and emptied drums at the incinerator were required to wear face masks, rubber gloves, and boots. The author concludes that disposal of hazardous wastes at the facility is state of the art. An in depth survey is recommended.« less

Fatal accidents in nighttime vs. daytime highway construction work zones.

PubMed

Arditi, David; Lee, Dong-Eun; Polat, Gul

2007-01-01

Awareness about worker safety in nighttime construction has been a major concern because it is believed that nighttime construction creates hazardous work conditions. However, only a few studies provide valuable comparative information about accident characteristics of nighttime and daytime highway construction activities. This study investigates fatal accidents that occurred in Illinois highway work zones in the period 1996-2001 in order to determine the safety differences between nighttime and daytime highway construction. The lighting and weather conditions were included into the study as control parameters to see their effects on the frequency of fatal accidents occurring in work zones. According to this study, there is evidence that nighttime construction is more hazardous than daytime construction. The inclusion of a weather parameter into the analysis has limited effect on this finding. The study justifies establishing an efficient work zone accident reporting system and taking all necessary measures to enhance safety in nighttime work zones.

The Risk of Occupational Injury Increased According to Severity of Noise Exposure After Controlling for Occupational Environment Status in Korea

PubMed Central

Yoon, Jin-Ha; Roh, Jaehoon; Kim, Chi-Nyon; Won, Jong-Uk

2016-01-01

Objectives: The aim of this study was to examine the relationship between noise exposure and risk of occupational injury. Materials and Methods: Korean National Health and Nutrition Examination Survey was used for the current study. Self-report questionnaires were used to investigate occupational injury and exposure to noise, chemicals, and machines and equipments. Results: In separate analyses for occupation and occupational hazard, the proportion of occupational injuries increased according to severity of noise exposure (all P < 0.05). Compared to the non-exposure group, the respective odds ratio (95% confidence intervals) for occupational injury was 1.39 (1.07–1.80) and 1.67 (1.13–2.46) in the mild and severe noise exposure groups, after controlling for age, gender, sleep hours, work schedule (shift work), and exposure status to hazardous chemicals and hazardous machines and equipments. Conclusions: The current study highlights the association between noise exposure and risk of occupational injury. Furthermore, risk of occupational injury increased according to severity of noise exposure. PMID:27991467

Health-hazard-evaluation report MHETA 89-362-2027, Helen Mining Company, Homer City, Pennsylvania

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ferguson, R.P.

1990-03-01

In response to a request from the United Mine Workers of America, an investigation was made of possible hazardous working conditions at the Helen Mining Company, Homer City, Pennsylvania. One of the tipple operators had complained of headaches, dizziness and skin rashes from working with a mixture of solvents used in the float/sink test operation. The solvents included perchloroethylene and dibromomethane. A week prior to receiving the request, the use of dibromomethane had been discontinued. Consequently, on the visit to the site, no traces of dibromomethane were found. After engineering controls were installed, only one of seven personal breathing zonemore » samples detected any perchloroethylene, and that sample was 0.12 parts per million, at the limit of detection. The author concludes that a hazard from perchloroethylene did not exist at the time of the evaluation. The author recommends replacing the rubber/cloth type glove being used with either a Teflon or Viton glove, and enclosing the work table.« less

Alkali activated solidification/stabilisation of air pollution control residues and co-fired pulverised fuel ash.

PubMed

Shirley, Robin; Black, Leon

2011-10-30

This paper examines the potential treatment by solidification/stabilisation (S/S) of air pollution control (APC) residues using only waste materials otherwise bound for disposal, namely a pulverised fuel ash (PFA) from a co-fired power station and a waste caustic solution. The use of waste materials to stabilise hazardous wastes in order to meet waste acceptance criteria (WAC) would offer an economical and efficient method for reducing the environmental impact of the hazardous waste. The potential is examined against leach limits for chlorides, sulphates and total dissolved solids, and compressive strength performance described in the WAC for stable non-reactive (SNR) hazardous waste landfill cells in England and Wales. The work demonstrates some potential for the treatment, including suitable compressive strengths to meet regulatory limits. Monolithic leach results showed good encapsulation compared to previous work using a more traditional cement binder. However, consistent with previous work, SNR WAC for chlorides was not met, suggesting the need for a washing stage. The potential problems of using a non-EN450 PFA for S/S applications were also highlighted, as well as experimental results which demonstrate the effect of ionic interactions on the mobility of phases during regulatory leach testing. Copyright © 2011 Elsevier B.V. All rights reserved.

Treatment of metal-laden hazardous wastes with advanced clean coal technology by-products. Quarterly report, December 30, 1996--March 30, 1997

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-12-31

The objective of this project is to utilize coal ashes to process hazardous materials such as industrial waste water treatment residues, contaminated soils, and air pollution control dusts from the metal industry and municipal waste incineration. This report describes the activities of the project team during the reporting period. The principal work has focused upon continuing evaluation of aged samples from Phase 1, planning supportive laboratory studies for Phase 2, completing scholarly work, reestablishing MAX Environmental Technologies, Inc., as the subcontractor for the field work of Phase 2, proposing two presentations for later in 1997, and making and responding tomore » several outside contacts.« less

A prospective study of musculoskeletal outcomes among manufacturing workers: II. Effects of psychosocial stress and work organization factors.

PubMed

Gerr, Fredric; Fethke, Nathan B; Anton, Dan; Merlino, Linda; Rosecrance, John; Marcus, Michele; Jones, Michael P

2014-02-01

The aim of this study was to characterize associations between psychosocial and work organizational risk factors and upper-extremity musculoskeletal symptoms and disorders. Methodological limitations of previous studies of psychosocial and work organizational risk factors and musculoskeletal outcomes have produced inconsistent associations. In this prospective epidemiologic study of 386 workers, questionnaires to assess decision latitude ("control") and psychological job demands ("demand") were administered to study participants and were used to classify them into job strain "quadrants". Measures of job stress and job change were collected during each week of follow-up. Incident hand/arm and neck/shoulder symptoms and disorders were ascertained weekly. Associations between exposure measures and musculoskeletal outcomes were estimated with proportional hazard methods. When compared to the low-demand/high-control job strain referent category, large increases in risk of hand/arm disorders were observed for both high-demand/high-control (hazard ratio [HR] = 4.49, 95% confidence interval [CI] = [1.23, 16.4]) and high-demand/low-control job strain categories (HR = 5.18,95% CI = [1.39, 19.4]). Similar associations were observed for hand/arm symptoms. A strong association was also observed between the low-demand/low-control job strain category and neck/shoulder disorders (HR = 6.46, 95% CI = [1.46, 28.6]). Statistically significant associations were also observed between weekly stress level and weekly job change and several musculoskeletal outcomes. Associations between psychosocial risk factors and work organizational factors and musculoskeletal outcomes were large and in the hypothesized direction. Prevention of occupational musculoskeletal disorders may require attention to psychosocial and work organizational factors in addition to physical factors. Methods to control adverse effects of psychosocial and work organizational risk factors should be explored.

Performing a preliminary hazard analysis applied to administration of injectable drugs to infants.

PubMed

Hfaiedh, Nadia; Kabiche, Sofiane; Delescluse, Catherine; Balde, Issa-Bella; Merlin, Sophie; Carret, Sandra; de Pontual, Loïc; Fontan, Jean-Eudes; Schlatter, Joël

2017-08-01

Errors in hospitals during the preparation and administration of intravenous drugs to infants and children have been reported to a rate of 13% to 84%. This study aimed to investigate the potential for hazardous events that may lead to an accident for preparation and administration of drug injection in a pediatric department and to describe a reduction plan of risks. The preliminary hazard analysis (PHA) method was implemented by a multidisciplinary working group over a period of 5 months (April-August 2014) in infants aged from 28 days to 2 years. The group identified required hazard controls and follow-up actions to reduce the error risk. To analyze the results, the STATCART APR software was used. During the analysis, 34 hazardous situations were identified, among 17 were quoted very critical and drawn 69 risk scenarios. After follow-up actions, the scenarios with unacceptable risk declined from 17.4% to 0%, and these with acceptable under control from 46.4% to 43.5%. The PHA can be used as an aid in the prioritization of corrective actions and the implementation of control measures to reduce risk. The PHA is a complement of the a posteriori risk management already exists. © 2017 John Wiley & Sons, Ltd.

29 CFR Appendix A to Subpart I of... - Non-Mandatory Guidelines for Hazard Assessment, Personal Protective Equipment (PPE) Selection...

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... conjunction with engineering controls, guards, and safe work practices and procedures. 2. Assessment and... are likely to arise under foreseeable work activity conditions and to match employee PPE to the...

29 CFR Appendix A to Subpart I of... - Non-Mandatory Guidelines for Hazard Assessment, Personal Protective Equipment (PPE) Selection...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... conjunction with engineering controls, guards, and safe work practices and procedures. 2. Assessment and... are likely to arise under foreseeable work activity conditions and to match employee PPE to the...

29 CFR Appendix A to Subpart I of... - Non-Mandatory Guidelines for Hazard Assessment, Personal Protective Equipment (PPE) Selection...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... conjunction with engineering controls, guards, and safe work practices and procedures. 2. Assessment and... are likely to arise under foreseeable work activity conditions and to match employee PPE to the...

29 CFR Appendix A to Subpart I of... - Non-Mandatory Guidelines for Hazard Assessment, Personal Protective Equipment (PPE) Selection...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... conjunction with engineering controls, guards, and safe work practices and procedures. 2. Assessment and... are likely to arise under foreseeable work activity conditions and to match employee PPE to the...

Risk assessment of oil and gas well drilling activities in Iran - a case study: human factors.

PubMed

Amir-Heidari, Payam; Farahani, Hadi; Ebrahemzadih, Mehrzad

2015-01-01

Oil and gas well drilling activities are associated with numerous hazards which have the potential to cause injury or harm for people, property and the environment. These hazards are also a threat for the reputation of drilling companies. To prevent accidents and undesired events in drilling operations it is essential to identify, evaluate, assess and control the attendant risks. In this work, a structured methodology is proposed for risk assessment of drilling activities. A case study is performed to identify, analyze and assess the risks arising from human factors in one of the on shore drilling sites in southern Iran. A total of 17 major hazards were identified and analyzed using the proposed methodology. The results showed that the residual risks of 100% of these hazards were in the acceptable or transitional zone, and their levels were expected to be lowered further by proper controls. This structured methodology may also be used in other drilling sites and companies for assessing the risks.

Primary or secondary tasks? Dual-task interference between cyclist hazard perception and cadence control using cross-modal sensory aids with rider assistance bike computers.

PubMed

Yang, Chao-Yang; Wu, Cheng-Tse

2017-03-01

This research investigated the risks involved in bicycle riding while using various sensory modalities to deliver training information. To understand the risks associated with using bike computers, this study evaluated hazard perception performance through lab-based simulations of authentic riding conditions. Analysing hazard sensitivity (d') of signal detection theory, the rider's response time, and eye glances provided insights into the risks of using bike computers. In this study, 30 participants were tested with eight hazard perception tasks while they maintained a cadence of 60 ± 5 RPM and used bike computers with different sensory displays, namely visual, auditory, and tactile feedback signals. The results indicated that synchronously using different sense organs to receive cadence feedback significantly affects hazard perception performance; direct visual information leads to the worst rider distraction, with a mean sensitivity to hazards (d') of -1.03. For systems with multiple interacting sensory aids, auditory aids were found to result in the greatest reduction in sensitivity to hazards (d' mean = -0.57), whereas tactile sensory aids reduced the degree of rider distraction (d' mean = -0.23). Our work complements existing work in this domain by advancing the understanding of how to design devices that deliver information subtly, thereby preventing disruption of a rider's perception of road hazards. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Investigation of noise hazards and hearing status of workers in outdoor quarries].

PubMed

Zhang, Guoying; Tang, Zhifeng; Yao, Yongping; Wang, Haiying

2014-08-01

To investigate the noise hazards in open quarries and to provide a basis for further control of noise hazards. An investigation was performed during 2010 to 2011 among all open quarries in Deqing County of Zhejiang Province, China. The investigation included basic information of the quarries, the occupational health situation and noise intensity at the workplace, and the hearing loss of workers exposed to noise in quarry enterprises. The hearing test results were evaluated based on the Diagnostic criteria of occupational noise-induced hearing loss (GBZ 49-2007). A total of 25 enterprises with open quarries were investigated, of which only 30.4% (17/56) workplaces met the national standard. The median noise level was 92.5 dB (A). Fifty-four (10.6%) out of 508 workers in the 25 enterprises were diagnosed with binaural hearing loss in the initial physical examination, with 18.3% (93/508) under surveillance. The rate of normal hearing among crushing workers, mechanists, drilling workers, and blasting workers ranged between 27.6% and 41.4%, which was significantly lower than that among workers exposed to slight noise hazards (80.0%) or other workers (63.7%) (P < 0.05). With increasing working years, the binaural hearing loss of crushing workers became serious. Serious occupational noise hazards existed in most jobs in open quarries, with crushing workers, mechanists, drilling workers, and blasting workers most seriously jeopardized. Among crushing workers, those working in the first-line or unprotected second?line positions suffered more than the others. Further measures should be taken by the supervision department and the enterprises to control the noise hazards in open quarries.

Mercury Exposure among Garbage Workers in Southern Thailand

PubMed Central

2012-01-01

Objectives 1) To determine mercury levels in urine samples from garbage workers in Southern Thailand, and 2) to describe the association between work characteristics, work positions, behavioral factors, and acute symptoms; and levels of mercury in urine samples. Methods A case-control study was conducted by interviewing 60 workers in 5 hazardous-waste-management factories, and 60 matched non-exposed persons living in the same area of Southern Thailand. Urine samples were collected to determine mercury levels by cold-vapor atomic absorption spectrometer mercury analyzer. Results The hazardous-waste workers' urinary mercury levels (10.07 µg/g creatinine) were significantly higher than the control group (1.33 µg/g creatinine) (p < 0.001). Work position, duration of work, personal protective equipment (PPE), and personal hygiene, were significantly associated with urinary mercury level (p < 0.001). The workers developed acute symptoms - of headaches, nausea, chest tightness, fatigue, and loss of consciousness at least once a week - and those who developed symptoms had significantly higher urinary mercury levels than those who did not, at p < 0.05. A multiple regression model was constructed. Significant predictors of urinary mercury levels included hours worked per day, days worked per week, duration of work (years), work position, use of PPE (mask, trousers, and gloves), and personal hygiene behavior (ate snacks or drank water at work, washed hands before lunch, and washed hands after work). Conclusion Changing garbage workers' hygiene habits can reduce urinary mercury levels. Personal hygiene is important, and should be stressed in education programs. Employers should institute engineering controls to reduce urinary mercury levels among garbage workers. PMID:23251842

The association of workplace hazards and smoking in a U.S. multiethnic working-class population.

PubMed

Okechukwu, Cassandra A; Krieger, Nancy; Chen, Jarvis; Sorensen, Glorian; Li, Yi; Barbeau, Elizabeth M

2010-01-01

We investigated the extent to which smoking status was associated with exposure to occupational (e.g., dust, chemicals, noise, and ergonomic strain) and social (e.g., abuse, sexual harassment, and racial discrimination) workplace hazards in a sample of U.S. multiethnic working-class adults. United for Health is a cross-sectional study designed to investigate the combined burden of occupational and social workplace hazards in relation to race/ethnicity, gender, and wage and to evaluate related health effects in a working-class population. Using validated measures, we collected data from 1,282 multiethnic working-class participants using audio computer-assisted interviews. We used multiple imputation methods to impute data for those missing data. Crude and adjusted logistic odds ratios (ORs) were modeled to estimate ORs and 95% confidence intervals (CIs). The prevalence of smoking was highest among non-Hispanic white workers (38.3%) and lowest for foreign-born workers (13.1%). We found an association between racial discrimination and smoking (OR = 1.12, 95% CI 1.01, 1.25). The relationship between smoking and sexual harassment, although not significant, was different for black women compared with men (OR = 1.79, 95% CI 0.99, 3.22). We did not find any associations by workplace abuse or by any of the occupational hazards. These results indicate that racial discrimination might be related to smoking in working-class populations and should be considered in tobacco-control efforts that target this high-risk population.

Health Hazard Evaluation Report HETA 85-165-1605, St. Louis Police Auto Body Shop, St. Louis, Missouri

DOE Office of Scientific and Technical Information (OSTI.GOV)

Carson, G.A.

1985-07-01

Environmental and breathing-zone samples were analyzed for toluene, lead, and total dust at the Saint Louis Police Auto Body Shop, Saint Louis, Missouri in January and February, 1985. The evaluation was requested by the Health Commissioner of the City of Saint Louis to investigate working conditions in the body shop. A prior health department investigation had indicated that there might be health hazards in the shop area. The author concludes that a potential health hazard exists due to overexposure to total dust while performing certain repairs at the facility. Recommendations include installing a supply air ventilation system for the exhaustmore » fans, orienting vehicles in the shop so that technicians are always working upstream of the airflow, and providing respiratory protection when it is not possible to control dust emissions.« less

40 CFR 63.9000 - What emission limitations and work practice standards must I meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... of Hazardous Waste in Boilers and Industrial Furnaces. (d) The emission limits for HCl storage tanks in table 1 to this subpart do not apply during periods of planned routine maintenance of HCl storage tank control devices. Periods of planned routine maintenance of each HCl storage tank control device...

40 CFR Table 7 to Subpart Eeee of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2011 CFR

2011-07-01

... equivalent control that meets the requirements in Table 4 to this subpart, item 1.a i. After emptying and... out a leak detection and repair program or equivalent control according to one of the subparts listed... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Organic Liquids Distribution (Non...

40 CFR Table 7 to Subpart Eeee of... - Initial Compliance With Work Practice Standards

Code of Federal Regulations, 2010 CFR

2010-07-01

... equivalent control that meets the requirements in Table 4 to this subpart, item 1.a i. After emptying and... out a leak detection and repair program or equivalent control according to one of the subparts listed... CATEGORIES National Emission Standards for Hazardous Air Pollutants: Organic Liquids Distribution (Non...

Environmental Assessment for the Maintenance, Upgrade, and Construction of the Jet Fuel Distribution System, Edwards Air Force Base, California

DTIC Science & Technology

2009-01-01

5c. PROGRAM ELEMENT NUMBER 6. AUTHOR (S) 5d. PROJECT NUMBER 5e. TASK NUMBER EIAP Control No. 07-0485 5f. WORK UNIT NUMBER 7. PERFORMING...chemical hazards such as fuel vapors, heavy metal paints, and asbestos particulates; venomous snakes; and potential exposure to hantavirus or valley...OCCUPATIONAL HEALTH Environmental hazards Personnel could be exposed to heat stress, venomous snakes, hantavirus from infected rodents, and valley

Mass and number size distributions of emitted particulates at five important operation units in a hazardous industrial waste incineration plant.

PubMed

Lin, Chi-Chi; Huang, Hsiao-Lin; Hsiao, Wen-Yuan

2016-01-01

Past studies indicated particulates generated by waste incineration contain various hazardous compounds. The aerosol characteristics are very important for particulate hazard control and workers' protection. This study explores the detailed characteristics of emitted particulates from each important operation unit in a rotary kiln-based hazardous industrial waste incineration plant. A dust size analyzer (Grimm 1.109) and a scanning mobility particle sizer (SMPS) were used to measure the aerosol mass concentration, mass size distribution, and number size distribution at five operation units (S1-S5) during periods of normal operation, furnace shutdown, and annual maintenance. The place with the highest measured PM10 concentration was located at the area of fly ash discharge from air pollution control equipment (S5) during the period of normal operation. Fine particles (PM2.5) constituted the majority of the emitted particles from the incineration plant. The mass size distributions (elucidated) made it clear that the size of aerosols caused by the increased particulate mass, resulting from work activities, were mostly greater than 1.5 μm. Whereas the number size distributions showed that the major diameters of particulates that caused the increase of particulate number concentrations, from work activities, were distributed in the sub micrometer range. The process of discharging fly ash from air pollution control equipment can significantly increase the emission of nanoparticles. The mass concentrations and size distributions of emitted particulates were different at each operation unit. This information is valuable for managers to take appropriate strategy to reduce the particulate emission and associated worker exposure.

A framework for developing research protocols for evaluation of microbial hazards and controls during production that pertain to the quality of agricultural water contacting fresh produce that may be consumed raw.

PubMed

Harris, Linda J; Bender, Jeff; Bihn, Elizabeth A; Blessington, Tyann; Danyluk, Michelle D; Delaquis, Pascal; Goodridge, Lawrence; Ibekwe, A Mark; Ilic, Sanja; Kniel, Kali; Lejeune, Jeffrey T; Schaffner, Donald W; Stoeckel, Don; Suslow, Trevor V

2012-12-01

Agricultural water may contact fresh produce during irrigation and/or when crop protection sprays (e.g., cooling to prevent sunburn, frost protection, and agrochemical mixtures) are applied. This document provides a framework for designing research studies that would add to our understanding of preharvest microbial food safety hazards and control measures pertaining to agricultural water. Researchers will be able to use this document to design studies, to anticipate the scope and detail of data required, and to evaluate previously published work. This document should also be useful for evaluating the strength of existing data and thus should aid in identifying future research needs. Use of this document by the research community may lead to greater consistency or comparability than currently exists among research studies, which may ultimately facilitate direct comparison of hazards and efficacy of controls among different commodities, conditions, and practices.

Automatic-Control System for Safer Brazing

NASA Technical Reports Server (NTRS)

Stein, J. A.; Vanasse, M. A.

1986-01-01

Automatic-control system for radio-frequency (RF) induction brazing of metal tubing reduces probability of operator errors, increases safety, and ensures high-quality brazed joints. Unit combines functions of gas control and electric-power control. Minimizes unnecessary flow of argon gas into work area and prevents electrical shocks from RF terminals. Controller will not allow power to flow from RF generator to brazing head unless work has been firmly attached to head and has actuated micro-switch. Potential shock hazard eliminated. Flow of argon for purging and cooling must be turned on and adjusted before brazing power applied. Provision ensures power not applied prematurely, causing damaged work or poor-quality joints. Controller automatically turns off argon flow at conclusion of brazing so potentially suffocating gas does not accumulate in confined areas.

Decision Tree Phytoremediation

DTIC Science & Technology

1999-12-01

aromatic hydrocarbons, and landfill leachates . Phytoremediation has been used for point and nonpoint source hazardous waste control. 1.2 Types of... Phytoremediation Prepared by Interstate Technology and Regulatory Cooperation Work Group Phytoremediation Work Team December 1999 Decision Tree...1999 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Phytoremediation Decision Tree 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c

H. W. Laboratory manual: 100 Area section

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1950-07-01

The purpose of this manual is to present a Hazard Breakdown of all jobs normally encountered in the laboratory work of the three sections comprising the Analytic Section, Metallurgy and Control Division of the Technical Department. A Hazard Breakdown is a careful analysis of any job in which the source of possible dangers is clearly indicated for each particular step. The analysis is prepared by individuals who are thoroughly familiar with the specific job or procedure. It is felt that if the hazards herein outlined are recognized by the Laboratory personnel and the suggested safety cautions followed, the chance formore » injury will be minimized and the worker will become generally more safety conscious. The manual, which is prefaced by the general safety rules applying to all the laboratories, is divided into three main sections, one for each of the three sections into which the Laboratories Division is divided. These sections are as follows: Section 1 -- 200 Area Control; Section 2 -- 100 Area Control; Section 3 -- 300 Area Control, Essential Materials, and Methods Improvement.« less

Health-hazard evaluation report HETA 87-097-1820, Devil's Lake Sioux Manufacturing Corporation, Fort Totten, Morth Dakota

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nichting, A.T.

1987-07-01

In response to a request from employees at the Devil's Lake Sioux Manufacturing Corporation located in Fort Totten, North Dakota, a study was made to determine a possible health hazard from n-hexane exposure and other organic solvents used in the manufacture of Kevlar combat helmets at the facility. Ten women working as edgers had been treated for carpal tunnel syndrome. Air samples revealed concentrations of xylene ranging from not detectable to 6.44 mg/m/sup 3/, toluene ranging from 0.46 to 33.2 mg/m/sup 3/, hexane ranging from 0.27 to 83.3 mg/m/sup 3/, and methyl ethyl ketone ranging from 20.0 to 310 mg/m/supmore » 3/. These levels were highest in the areas of the facility where edgers and glue spray booth operators worked. The author concludes that solvent exposures in these locations posed a potential health hazard. The carpal tunnel syndrome complaints appear to be related to ergonomic factors. The author recommends the substitution of less-toxic materials in the workplace; applying proper engineering controls; improving local-exhaust ventilation; providing protective clothing for workers; sampling of employees for organic solvent exposure at regular intervals; and informing the employees of all hazards inherent in their work.« less

Effective tree hazard control on forested recreation sites...losses and protection costs evaluated

Treesearch

Lee A. Paine

1967-01-01

Effectiveness of hazard control was evaluated by analyzing data on tree failures, accidents, and control costs on California recreation sites. Results indicate that reduction of limb hazard in oaks and bole hazard in conifers is the most effective form of control. Least effective is limb hazard reduction in conifers. After hazard control goals or control budgets have...

A method for using unmanned aerial vehicles for emergency investigation of single geo-hazards and sample applications of this method

NASA Astrophysics Data System (ADS)

Huang, Haifeng; Long, Jingjing; Yi, Wu; Yi, Qinglin; Zhang, Guodong; Lei, Bangjun

2017-11-01

In recent years, unmanned aerial vehicles (UAVs) have become widely used in emergency investigations of major natural hazards over large areas; however, UAVs are less commonly employed to investigate single geo-hazards. Based on a number of successful investigations in the Three Gorges Reservoir area, China, a complete UAV-based method for performing emergency investigations of single geo-hazards is described. First, a customized UAV system that consists of a multi-rotor UAV subsystem, an aerial photography subsystem, a ground control subsystem and a ground surveillance subsystem is described in detail. The implementation process, which includes four steps, i.e., indoor preparation, site investigation, on-site fast processing and application, and indoor comprehensive processing and application, is then elaborated, and two investigation schemes, automatic and manual, that are used in the site investigation step are put forward. Moreover, some key techniques and methods - e.g., the layout and measurement of ground control points (GCPs), route planning, flight control and image collection, and the Structure from Motion (SfM) photogrammetry processing - are explained. Finally, three applications are given. Experience has shown that using UAVs for emergency investigation of single geo-hazards greatly reduces the time, intensity and risks associated with on-site work and provides valuable, high-accuracy, high-resolution information that supports emergency responses.

Step 1: Human System Integration Pilot-Technology Interface Requirements for Weather Management

NASA Technical Reports Server (NTRS)

2005-01-01

This document involves definition of technology interface requirements for Hazardous Weather Avoidance. Technology concepts in use by the Access 5 Weather Management Work Package were considered. Beginning with the Human System Integration (HIS) high-level functional requirement for Hazardous Weather Avoidance, and Hazardous Weather Avoidance technology elements, HSI requirements for the interface to the pilot were identified. Results of the analysis describe (1) the information required by the pilot to have knowledge of hazardous weather, and (2) the control capability needed by the pilot to obtain hazardous weather information. Fundamentally, these requirements provide the candidate Hazardous Weather Avoidance technology concepts with the necessary human-related elements to make them compatible with human capabilities and limitations. The results of the analysis describe how Hazardous Weather Avoidance operations and functions should interface with the pilot to provide the necessary Weather Management functionality to the UA-pilot system. Requirements and guidelines for Hazardous Weather Avoidance are partitioned into four categories: (1) Planning En Route (2) Encountering Hazardous Weather En Route, (3) Planning to Destination, and (4) Diversion Planning Alternate Airport. Each requirement is stated and is supported with a rationale and associated reference(s).

Thermal Stress Awareness, Self-Study #18649

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chochoms, Michael

Thermal stresses can expose individuals to a variety of health hazards at work, home, and play. Every year thermal stresses cause severe injuries and death to a large range of people, from elderly people in cities during summer heat waves to young people engaged in winter mountaineering. Awareness is the key to preventing the health hazards associated with thermal stresses. This course is designed for personnel at Los Alamos National Laboratory (LANL). It addresses both heat and cold stresses and discusses their factors, signs and symptoms, treatments, and controls.

40 CFR 63.7925 - What emissions limitations and work practice standards must I meet for closed vent systems and...

Code of Federal Regulations, 2012 CFR

2012-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL... Standards for Hazardous Air Pollutants: Site Remediation Closed Vent Systems and Control Devices § 63.7925...

40 CFR 63.7925 - What emissions limitations and work practice standards must I meet for closed vent systems and...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL... Standards for Hazardous Air Pollutants: Site Remediation Closed Vent Systems and Control Devices § 63.7925...

78 FR 38730 - Announcement of Funding Awards for Lead-Based Paint Hazard Control, and Lead Hazard Reduction...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-27

... Awards for Lead-Based Paint Hazard Control, and Lead Hazard Reduction Demonstration Grant Programs for... (OHHLHC) Lead-Based Paint Hazard Control, and Lead Hazard Reduction Demonstration Grant Program Notices of... Grants.gov on December 3, 2012, and amended on January 18, 2013, for the Lead Based Paint Hazard Control...

Cause and control: education and training of professional industrial hygienists for 2020.

PubMed

Sherwood, R J

1992-06-01

By the year 2020, the environmental movement will have established a recognized profession, expert at studying deleterious effects in the working and public domains. Environmental science practitioners will be better able to identify and relate ill effects to the presence of adverse agents in the environment; they will not, however, necessarily be skilled at developing systems for control. Industrial hygienists should provide the unique and special skills required to establish economically optimum control systems. Industrial hygiene should by then have been redefined to emphasize this critical role of its professional members. A new orientation for education is therefore proposed to provide a sound basis for the professional needs of industrial hygienists who should be at the peak of their careers in 2020. Members of the profession should then be the leaders in research on, and practice of, the science and engineering of design, installation, and monitoring of control systems for occupational and environmental hazards. The preferred educational background for entry to the profession should be some branch of engineering, which by then must have recovered its lost status and be divided into fewer specialized compartments than it is today. Engineering should provide a broader base for students entering professional education in this field, who will be more concerned with prevention and engineering control of both occupational and environmental hazards, rather than with measurement and epidemiology of the biological and toxicologic sciences. Preparation for professional work in industrial hygiene will call for the specialized education of engineers required to design and maintain processes that minimize the use, production, or generation of hazardous substances.(ABSTRACT TRUNCATED AT 250 WORDS)

14 CFR 417.413 - Hazard areas.

Code of Federal Regulations, 2014 CFR

2014-01-01

... controls during public access. A launch operator must establish procedural controls that prevent hazardous... that system hazard controls are in place that prevent initiation of a hazardous event. Hazard controls... devices or other restraints on system actuation switches or other controls to eliminate the possibility of...

14 CFR 417.413 - Hazard areas.

Code of Federal Regulations, 2010 CFR

2010-01-01

... controls during public access. A launch operator must establish procedural controls that prevent hazardous... that system hazard controls are in place that prevent initiation of a hazardous event. Hazard controls... devices or other restraints on system actuation switches or other controls to eliminate the possibility of...

14 CFR 417.413 - Hazard areas.

Code of Federal Regulations, 2011 CFR

2011-01-01

... controls during public access. A launch operator must establish procedural controls that prevent hazardous... that system hazard controls are in place that prevent initiation of a hazardous event. Hazard controls... devices or other restraints on system actuation switches or other controls to eliminate the possibility of...

Kennedy Space Center environmental health program

NASA Technical Reports Server (NTRS)

Marmaro, G. M.; Cardinale, M. A.; Summerfield, B. R.; Tipton, D. A.

1992-01-01

The Kennedy Space Center's environmental health organization is responsible for programs which assure its employees a healthful workplace under diverse and varied working conditions. These programs encompass the disciplines of industrial hygiene, radiation protection (health physics), and environmental sanitation/pollution control. Activities range from the routine, such as normal office work, to the highly specialized, such as the processing of highly toxic and hazardous materials.

Does age matter in predicting musculoskeletal disorder risk? An analysis of workplace predictors over 4 years.

PubMed

Oakman, Jodi; Neupane, Subas; Nygård, Clas-Håkan

2016-10-01

Musculoskeletal disorders (MSDs) are a major workplace issue. With increasing pressure to extend working lives, predictors of MSD risk across all age groups require accurate identification to inform risk reduction strategies. In 2005 and 2009, a survey was conducted in a Finnish food processing company (N = 734). Data on workplace physical and psychosocial hazards, work ability, job satisfaction and lifestyle-related variables were collected, and MSD risk was measured through assessment of work-related strain in four body areas. Predictors of MSD risk across three age groups (20-35, 36-49, 50+) were assessed with linear regression analysis. Physical hazards and MSD risk were related differently for each age group. The relationship between psychosocial hazards and MSD risk was less clear. For younger workers, physical hazards were not associated with MSD risk. In contrast, for those aged 36-49, repetitive movements (B = 1.76, p < 0.001) and awkward postures (B = 1.30, p = 0.02) were associated with increased MSD risk. For older workers, environmental hazards were positively associated with MSD risk (B = 0.37, p = 0.04). Predictors of MSD risk changed differently for each age group during 4 years of follow-up. For younger workers, change in environment and repetitive movements, for middle age team support and for older workers change in awkward posture were significant predictors of MSD risk. These results support the need for workplace-specific hazard surveillance data. This will ensure that all contributing factors to MSD risk can be accurately identified and controlled independent of age.

Rheumatic effects of vibration at work

PubMed Central

Palmer, Keith T; Bovenzi, Massimo

2016-01-01

Occupational exposures to vibration come in many guises and are very common at a population level. It follows that an important minority of working-aged patients seen by medical services will have been exposed to this hazard of employment. Vibration can cause human health effects which may manifest in the patients that rheumatologists see. In this chapter we identify the health effects of relevance to them, and review their epidemiology, pathophysiology, clinical presentation, differential diagnosis, and vocational and clinical management. On either side of this, we describe the nature and assessment of the hazard, the scale and common patterns of exposure to vibration in the community, and the legal basis for controlling health risks, and comment on the role of health surveillance in detecting early adverse effects and what can be done to prevent the rheumatic effects of vibration at work. PMID:26612239

The role of occupational activities and work environment in occupational injury and interplay of personal factors in various age groups among Indian and French coalminers.

PubMed

Bhattacherjee, Ashis; Kunar, Bijay Mihir; Baumann, Michele; Chau, Nearkasen

2013-12-01

The role of occupational hazards in occupational injury may be mediated by individual factors across various age groups. This study assessed the role of occupational hazards as well as contribution of individual factors to injuries among Indian and French coalminers. We conducted a case-control study on 245 injured workers and on 330 controls without any injuries from Indian coal mines using face-to-face interviews, and a retrospective study on 516 French coalminers using a self-administered questionnaire including potential occupational and personal factors. Data were analyzed using logistic models. The annual rate of injuries was 5.5% for Indian coalminers and 14.9% for the French ones. Logistic model including all occupational factors showed that major injury causes were: hand-tools, material handling, machines, and environment/work-geological/strata conditions among Indian miners (adjusted odds-ratios 2.01 to 3.30) and biomechanical exposure score among French miners (adjusted odds-ratio 3.01 for score the 1-4, 3.47 for the score 5-7, and 7.26 for score ≥ 8, vs. score 0). Personal factors among Indian and French coalminers reduced/exacerbated the roles of various occupational hazards to a different extent depending on workers' age. We conclude that injury roles of occupational hazards were reduced or exacerbated by personal factors depending on workers' age in both populations. This knowledge is useful when designing prevention which should definitely consider workers' age.

Plasma Hazards and Acceptance for International Space Station Extravehicular Activities

NASA Astrophysics Data System (ADS)

Patton, Thomas

2010-09-01

Extravehicular activity(EVA) is accepted by NASA and other space faring agencies as a necessary risk in order to build and maintain a safe and efficient laboratory in space. EVAs are used for standard construction and as contingency operations to repair critical equipment for vehicle sustainability and safety of the entire crew in the habitable volume. There are many hazards that are assessed for even the most mundane EVA for astronauts, and the vast majority of these are adequately controlled per the rules of the International Space Station Program. The need for EVA repair and construction has driven acceptance of a possible catastrophic hazard to the EVA crewmember which cannot currently be controlled adequately. That hazard is electrical shock from the very environment in which they work. This paper describes the environment, causes and contributors to the shock of EVA crewmembers attributed to the ionospheric plasma environment in low Earth orbit. It will detail the hazard history, and acceptance process for the risk associated with these hazards that give assurance to a safe EVA. In addition to the hazard acceptance process this paper will explore other factors that go into the decision to accept a risk including criticality of task, hardware design and capability, and the probability of hazard occurrence. Also included will be the required interaction between organizations at NASA(EVA Office, Environments, Engineering, Mission Operations, Safety) in order to build and eventually gain adequate acceptance rationale for a hazard of this kind. During the course of the discussion, all current methods of mitigating the hazard will be identified. This paper will capture the history of the plasma hazard analysis and processes used by the International Space Station Program to formally assess and qualify the risk. The paper will discuss steps that have been taken to identify and perform required analysis of the floating potential shock hazard from the ISS environment which eventually led to its status as an accepted risk for ISS EVAs.

Evaluation of an active learning module to teach hazard and risk in Hazard Analysis and Critical Control Points (HACCP) classes.

PubMed

Oyarzabal, Omar A; Rowe, Ellen

2017-04-01

The terms hazard and risk are significant building blocks for the organization of risk-based food safety plans. Unfortunately, these terms are not clear for some personnel working in food manufacturing facilities. In addition, there are few examples of active learning modules for teaching adult participants the principles of hazard analysis and critical control points (HACCP). In this study, we evaluated the effectiveness of an active learning module to teach hazard and risk to participants of HACCP classes provided by the University of Vermont Extension in 2015 and 2016. This interactive module is comprised of a questionnaire; group playing of a dice game that we have previously introduced in the teaching of HACCP; the discussion of the terms hazard and risk; and a self-assessment questionnaire to evaluate the teaching of hazard and risk. From 71 adult participants that completed this module, 40 participants (56%) provided the most appropriate definition of hazard, 19 participants (27%) provided the most appropriate definition of risk, 14 participants (20%) provided the most appropriate definitions of both hazard and risk, and 23 participants (32%) did not provide an appropriate definition for hazard or risk. Self-assessment data showed an improvement in the understanding of these terms (P < 0.05). Thirty participants (42%) stated that the most valuable thing they learned with this interactive module was the difference between hazard and risk, and 40 participants (65%) responded that they did not attend similar presentations in the past. The fact that less than one third of the participants answered properly to the definitions of hazard and risk at baseline is not surprising. However, these results highlight the need for the incorporation of modules to discuss these important food safety terms and include more active learning modules to teach food safety classes. This study suggests that active learning helps food personnel better understand important food safety terms that serve as building blocks for the understanding of more complex food safety topics.

Occupational health surveillance: a means to identify work-related risks.

PubMed

Froines, J R; Dellenbaugh, C A; Wegman, D H

1986-09-01

The lack of successful disease surveillance methods has resulted in few reliable estimates of workplace-related disease. Hazard surveillance--the ongoing assessment of chemical use and worker exposure to the chemicals--is presented as a way to supplement occupational disease surveillance. Existing OSHA (Occupational Safety and Health Administration) and NIOSH (National Institute for Occupational Health) data systems are adapted to this function to characterize the distribution and type of hazardous industry in Los Angeles County. A new method is developed for ranking potentially hazardous industries in the county using actual exposure measurements from federal OSHA compliance inspections. The strengths of the different systems are presented along with considerations of industrial employment and types of specific chemical exposures. Applications for information from hazard surveillance are discussed in terms of intervention, monitoring exposure control, planning, research, and as a complement to disease surveillance.

Research on preventive technologies for bed-separation water hazard in China coal mines

NASA Astrophysics Data System (ADS)

Gui, Herong; Tong, Shijie; Qiu, Weizhong; Lin, Manli

2018-03-01

Bed-separation water is one of the major water hazards in coal mines. Targeted researches on the preventive technologies are of paramount importance to safe mining. This article studied the restrictive effect of geological and mining factors, such as lithological properties of roof strata, coal seam inclination, water source to bed separations, roof management method, dimensions of mining working face, and mining progress, on the formation of bed-separation water hazard. The key techniques to prevent bed-separation water-related accidents include interception, diversion, destructing the buffer layer, grouting and backfilling, etc. The operation and efficiency of each technique are corroborated in field engineering cases. The results of this study will offer reference to countries with similar mining conditions in the researches on bed-separation water burst and hazard control in coal mines.

Lean manufacturing comes to China: a case study of its impact on workplace health and safety.

PubMed

Brown, Garrett D; O'Rourke, Dara

2007-01-01

Lean manufacturing, which establishes small production "cells," or teams of workers, who complete an entire product from raw material processing through final assembly and shipment, increases health and safety hazards by mixing previously separated exposures to various chemicals (with possible additive and cumulative effects) and noise. The intensification of work leads to greater ergonomic and stress-related adverse health effects, as well as increased safety hazards. The standard industrial hygiene approach of anticipation, recognition, evaluation, and hazard control is applicable to lean operations. A focus on worker participation in identifying and solving problems is critical for reducing negative impacts. A key to worker safety in lean production operations is the development of informed, empowered, and active workers with the knowledge, skills, and opportunity to act in the workplace to eliminate or reduce hazards.

New Zealanders working non-standard hours also have greater exposure to other workplace hazards.

PubMed

Jay, Sarah M; Gander, Philippa H; Eng, Amanda; Cheng, Soo; Douwes, Jeroen; Ellison-Loschmann, Lis; McLean, Dave; Pearce, Neil; 'tMannetje, Andrea

2017-01-01

Exposure to workplace hazards, such as dust, solvents, and fumes, has the potential to adversely affect the health of people. However, the effects of workplace hazards on health may differ when exposure occurs at different times in the circadian cycle, and among people who work longer hours or who do not obtain adequate sleep. The aim of the present study was to document exposures to workplace hazards across a national sample of New Zealanders, comparing people who work a standard 08:00 -17:00 h Monday-to-Friday working week (Std hours) and those who do not (N-Std hours). New Zealanders (n = 10 000) aged 20-64 yrs were randomly selected from the Electoral Roll to take part in a nationwide survey of workplace exposures. Telephone interviews were conducted between 2004 and 2006, using a six-part questionnaire addressing demographics, detailed information on the current or most recent job (including exposures to a range of workplace hazards), sleep, sleepiness, and health status. N-Std hours were categorised on the basis of: being required to start work prior to 07:00 h or finish work after 21:00 h and/or; having a regular on-call commitment (at least once per week) and/or; working rotating shifts and/or; working night shift(s) in the last month. The response rate was 37% (n = 3003), with 22.2% of participants (n = 656) categorised as working N-Std hours. Industry sectors with the highest numbers of participants working N-Std hours were manufacturing, health and community services, and agriculture, fishing, and forestry. Response rate was 37% (n = 3003) with 22.2% (n = 656) categorised as working N-Std hours. Participants working N-Std hours were more likely to be exposed to all identified hazards, including multiple hazards (OR = 2.45, 95% CI = 2.01-3.0) compared to those working Std hours. Participants working N-Std hours were also more likely to report 'never/rarely' getting enough sleep (OR = 1.38, 95% CI = 1.15-1.65), 'never/rarely' waking refreshed (OR = 1.23, 95% CI = 1.04-1.47), and excessive sleepiness (OR = 1.77, 95% CI = 1.29-2.42). New Zealanders working N-Std hours are more likely to be exposed to hazards in the workplace, to be exposed to multiple hazards, and to report inadequate sleep and excessive sleepiness than their colleagues working a standard 08:00-17:00 h Monday-to-Friday working week. More research is needed on the effects of exposure to hazardous substances outside the usual waking day, on the effects of exposure to multiple hazards, and on the combination of hazard exposure and sleep restriction as a result of shift work.

76 FR 45600 - Order of Succession for the Office of Healthy Homes and Lead Hazard Control

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... Office of Healthy Homes and Lead Hazard Control AGENCY: Office of Healthy Homes and Lead Hazard Control... Healthy Homes and Lead Hazard Control for the Department of Housing and Urban Development designates the Order of Succession for the Office of Healthy Homes and Lead Hazard Control. This Order of Succession...

Phenyl mercuric acetate (PMA): mercury-bearing flexible gymnasium floors in schools--evaluation of hazards and controlled abatement.

PubMed

Beaulieu, Harry J; Beaulieu, Serrita; Brown, Chris

2008-06-01

Phenyl mercuric acetate (PMA) historically has been used as a catalyst in polyurethane systems. In the 1950s-1970s, PMA was used as a catalyst in the 3M Tartan brand polyurethane flexible floors that were installed commonly in school gymnasiums. Mercury vapor is released into air above the surface of these floors. Sampling mercury in bulk flooring material and mercury vapor in air was conducted in nine Idaho schools in the spring of 2006. These evaluations were conducted in response to concerns by school officials that the floors could contain mercury and could release the mercury vapor into the air, presenting a potential health hazard for students, staff, and visitors. Controlled abatement was conducted in one school where remodeling would impact the mercury-bearing flexible gym floors ( approximately 9,000 ft(2) total). The controlled abatement consisted of containment of the work area with negative air technology; worker protection, including mercury-specific training, use of personal protective equipment, and biological and exposure monitoring; and environmental protection, including proper disposal of mercury-bearing hazardous waste material.

Respiratory dysfunction in swine production facility workers: dose-response relationships of environmental exposures and pulmonary function.

PubMed

Donham, K J; Reynolds, S J; Whitten, P; Merchant, J A; Burmeister, L; Popendorf, W J

1995-03-01

Human respiratory health hazards for people working in livestock confinement buildings have been recognized since 1974. However, before comprehensive control programs can be implemented, more knowledge is needed of specific hazardous substances present in the air of these buildings, and at what concentrations they are harmful. Therefore, a medical epidemiological and exposure-response study was conducted on 207 swine producers using intensive housing systems (108 farms). Dose-response relationships between pulmonary function and exposures are reported here. Positive correlations were seen between change in pulmonary function over a work period and exposure to total dust, respirable dust, ammonia, respirable endotoxin, and the interactions of age-of-producer and dust exposure and years-of-working-in-the-facility and dust exposure. Relationships between baseline pulmonary function and exposures were not strong and therefore, not pursued in this study. The correlations between exposure and response were stronger after 6 years of exposure. Multiple regression models were used to identify total dust and ammonia as the two primary environmental predictors of pulmonary function decrements over a work period. The regression models were then used to determine exposure concentrations related to pulmonary function decrements suggestive of a health hazard. Total dust concentrations > or = 2.8 mg/m3 were predictive of a work period decrement of > or = 10% in FEV1. Ammonia concentrations of > or = 7.5 ppm were predictive of a > or = 3% work period decrement in FEV1. These predictive concentrations were similar to a previous dose-response study, which suggested 2.5 mg/m3 of total dust and 7 ppm of NH3 were associated with significant work period decrements. Therefore, dust > or = 2.8 mg/m3 and ammonia > or = 7.5 ppm should be considered reasonable evidence for guidelines regarding hazardous exposure concentrations in this work environment.

[Design of a Hazard Analysis and Critical Control Points (HACCP) plan to assure the safety of a bologna product produced by a meat processing plant].

PubMed

Bou Rached, Lizet; Ascanio, Norelis; Hernández, Pilar

2004-03-01

The Hazard Analysis and Critical Control Point (HACCP) is a systematic integral program used to identify and estimate the hazards (microbiological, chemical and physical) and the risks generated during the primary production, processing, storage, distribution, expense and consumption of foods. To establish a program of HACCP has advantages, being some of them: to emphasize more in the prevention than in the detection, to diminish the costs, to minimize the risk of manufacturing faulty products, to allow bigger trust to the management, to strengthen the national and international competitiveness, among others. The present work is a proposal based on the design of an HACCP program to guarantee the safety of the Bologna Special Type elaborated by a meat products industry, through the determination of hazards (microbiological, chemical or physical), the identification of critical control points (CCP), the establishment of critical limits, plan corrective actions and the establishment of documentation and verification procedures. The used methodology was based in the application of the seven basic principles settled down by the Codex Alimentarius, obtaining the design of this program. In view of the fact that recently the meat products are linked with pathogens like E. coli O157:H7 and Listeria monocytogenes, these were contemplated as microbiological hazard for the establishment of the HACCP plan whose application will guarantee the obtaining of a safe product.

Aflatoxin control--how a regulatory agency managed risk from an unavoidable natural toxicant in food and feed.

PubMed

Park, D L; Stoloff, L

1989-04-01

The control by the Food and Drug Administration (FDA) of aflatoxin, a relatively recently discovered, unavoidable natural contaminant produced by specific molds that invade a number of basic food and feedstuffs, provides an example of the varying forces that affect risk assessment and management by a regulatory Agency. This is the story of how the FDA responded to the initial discovery of a potential carcinogenic hazard to humans in a domestic commodity, to the developing information concerning the nature of the hazard, to the economic and political pressures that are created by the impact of natural forces on regulatory controls, and to the restraints of laws within which the Agency must work. This story covers four periods: the years of discovery and action decisions on the basis of meager knowledge and the fear of cancer; the years of tinkering on paper with the regulatory process, the years of digestion of the accumulating knowledge, and the application of that knowledge to actions forced by natural events; and an audit of the current status of knowledge about the hazard from aflatoxin, and proposals for regulatory control based on that knowledge.

The MITy micro-rover: Sensing, control, and operation

NASA Technical Reports Server (NTRS)

Malafeew, Eric; Kaliardos, William

1994-01-01

The sensory, control, and operation systems of the 'MITy' Mars micro-rover are discussed. It is shown that the customized sun tracker and laser rangefinder provide internal, autonomous dead reckoning and hazard detection in unstructured environments. The micro-rover consists of three articulated platforms with sensing, processing and payload subsystems connected by a dual spring suspension system. A reactive obstacle avoidance routine makes intelligent use of robot-centered laser information to maneuver through cluttered environments. The hazard sensors include a rangefinder, inclinometers, proximity sensors and collision sensors. A 486/66 laptop computer runs the graphical user interface and programming environment. A graphical window displays robot telemetry in real time and a small TV/VCR is used for real time supervisory control. Guidance, navigation, and control routines work in conjunction with the mapping and obstacle avoidance functions to provide heading and speed commands that maneuver the robot around obstacles and towards the target.

Guidance Manual for Integrating Hazardous Material Control and Management into System Acquisition Programs

DTIC Science & Technology

1993-04-01

34 in the remainder of this "• IPS. Ensure that system safety, Section refer to the DoD format paragraph health hazards, and environmental for the...hazardous materials is controlled in the manner which protects human health and the environment at the least cost. Hazardous Material Control and Management...of hazardous materials is controlled in a manner which protects human health and the environment at the least cost. Hazardous Material Control and

Biofiltration - an innovative approach to vapor phase treatment at the Silvex hazardous waste site in Florida

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hartsfield, B.

1995-12-31

Biofiltration is an emerging technology that is being used for vapor phase treatment at the Silvex hazardous waste site. Biofiltration works by directing the off-gas from the groundwater treatment system through a bed of soil, compost or other medium that supports the growth of bacteria. Contaminants are absorbed into the water present in the medium, and are subsequently degraded by the microorganisms. The biofiltration system at the Silvex hazardous waste site has been effective in removing contaminants from the off-gas. The biofiltration system has also been effective in minimizing the odor problem resulting from mercaptans in the off-gas. Biofiltration hasmore » been used for many years at wastewater and industrial plants to control odor and remove organic contaminants. This technology has only recently been used for hazardous waste site cleanups. The hazardous waste literature is now listing biofiltration as a vapor phase treatment technology, along with carbon, thermal oxidation and others.« less

Mobile machine hazardous working zone warning system

DOEpatents

Schiffbauer, William H.; Ganoe, Carl W.

1999-01-01

A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

Mobile machine hazardous working zone warning system

DOEpatents

Schiffbauer, W.H.; Ganoe, C.W.

1999-08-17

A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

Report: Industrial Hygiene: Safer Working through Analytical Chemistry.

ERIC Educational Resources Information Center

Hemingway, Ronald E.

1980-01-01

The analytical chemist is involved in the recognition, evaluation, and control of chemical hazards in the workplace environment. These goals can be achieved by setting up a monitoring program; this should be a combination of planning, calibration, sampling, and analysis of toxic substances. (SMB)

40 CFR 63.1654 - Operational and work practice standards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... according to a written fugitive dust control plan must be incorporated in the operating permit for the... standards. 63.1654 Section 63.1654 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES...

40 CFR 63.1654 - Operational and work practice standards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... according to a written fugitive dust control plan must be incorporated in the operating permit for the... standards. 63.1654 Section 63.1654 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES...

[Hazardous materials and work safety in veterinary practice. 1: Hazardous material definition and characterization, practice documentation and general rules for handling].

PubMed

Sliwinski-Korell, A; Lutz, F

1998-04-01

In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material is given and the potential risks are mentioned. The correct documentation regarding the protection of the purchase, storage, working conditions and removal of hazardous material and of the personal is explained. General rules for the handling of hazardous material are described. In part 2, particular emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gas, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references is also given.

ATV Engineering Support Team Safety Console Preparation for the Johannes Kepler Mission

NASA Astrophysics Data System (ADS)

Chase, R.; Oliefka, L.

2010-09-01

This paper describes the improvements to be implemented in the Safety console position of the Engineering Support Team(EST) at the Automated Transfer Vehicle(ATV) Control Centre(ATV-CC) for the upcoming ATV Johannes Kepler mission. The ATV missions to the International Space Station are monitored and controlled from the ATV-CC in Toulouse, France. The commanding of ATV is performed by the Vehicle Engineering Team(VET) in the main control room under authority of the Flight Director. The EST performs a monitoring function in a room beside the main control room. One of the EST positions is the Safety console, which is staffed by safety engineers from ESA and the industrial prime contractor, Astrium. The function of the Safety console is to check whether the hazard controls are available throughout the mission as required by the Hazard Reports approved by the ISS Safety Review Panel. Safety console preparation activities were limited prior to the first ATV mission due to schedule constraints, and the safety engineers involved have been working to improve the readiness for ATV 2. The following steps have been taken or are in process, and will be described in this paper: • review of the implementation of Operations Control Agreement Documents(OCADs) that record the way operational hazard controls are performed to meet the needs of the Hazard Reports(typically in Flight Rules and Crew Procedures), • crosscheck of operational control needs and implementations with respect to ATV's first flight observations and post flight evaluations, with a view to identifying additional, obsolete or revised operational hazard controls, • participation in the Flight Rule review and update process carried out between missions, • participation in the assessment of anomalies observed during the first ATV mission, to ensure that any impacts are addressed in the ATV 2 safety documentation, • preparation of a Safety console handbook to provide lists of important safety aspects to be monitored at various stages of the mission, including links to relevant Hazard Reports, Flight Rules, and supporting documentation, • participation to training courses conducted in the frame of the ATV Training Academy(ATAC), and provision of courses related to safety for the other members of the VET and EST, • participation to simulations conducted at ATV-CC, including off-nominal cases. The result of these activities will be an improved level of readiness for the ATV 2 mission.

Inventing the Right to Know: Herbert Abrams's Efforts to Democratize Access to Workplace Health Hazard Information in the 1950s.

PubMed

Derickson, Alan

2016-02-01

In the 1980s, the right-to-know movement won American workers unprecedented access to information about the health hazards they faced on the job. The precursors and origins of these initiatives to extend workplace democracy remain quite obscure. This study brings to light the efforts of one of the early proponents of wider dissemination of information related to hazard recognition and control. Through his work as a state public health official and as an advisor to organized labor in the 1950s, Herbert Abrams was a pioneer in advocating not only broader sharing of knowledge but also more expansive rights of workers and their organizations to act on that knowledge.

Working beyond 65: a qualitative study of perceived hazards and discomforts at work.

PubMed

Reynolds, Frances; Farrow, Alexandra; Blank, Alison

2013-01-01

This qualitative study explored self-reports of hazards and discomforts in the workplace and coping strategies among those choosing to work beyond the age of 65 years. 30 people aged 66-91 years took part. Most worked part-time in professional or administrative roles. Each participant engaged in one semi-structured interview. Participants described some hazards and discomforts in their current work, but no recent accidents. The main age-related discomfort was tiredness. Other hazards that recurred in participants' accounts were physical demands of the job, driving, and interpersonal difficulties such as client or customer complaints, and in very rare cases, bullying. Most work-related hazards (e.g. prolonged sitting at computers, lifting heavy items and driving) were thought likely to affect any worker regardless of age. Coping strategies included making adaptations to age-related changes (such as decreased stamina) by keeping fit and being open about difficulties to colleagues, reducing hours of work, altering roles at work, limiting driving, applying expertise derived from previous work experiences, being assertive, using authority and status, and (among the minority employed in larger organisations) making use of supportive company/organisational policies and practices. Participants described taking individual responsibility for managing hazards at work and perceived little or no elevation of risk linked to age.

Work-related mortality in England and Wales, 1979-2000.

PubMed

Coggon, David; Harris, E Clare; Brown, Terry; Rice, Simon; Palmer, Keith T

2010-12-01

To explore time trends in deaths attributable to work in England and Wales, and identify priorities for prevention, we conducted a proportional analysis of mortality by occupation over a 22-year period. Analysis was based on deaths in men aged 20-74 years during 1979-1980 and 1982-2000 with a recorded occupation. Proportional mortality ratios, standardised for age and social class, were calculated for pre-specified combinations of occupation and cause of death, for which excess mortality could reasonably be attributed to work. Differences between observed and expected numbers of deaths by cause and occupation were expressed as annual excess death rates. Mortality attributable to work declined substantially over the period of study, with total excess death rates of 733.2 per year during 1979-1990 and 471.7 per year during 1991-2000. The largest contributing hazards were chronic obstructive pulmonary disease and pneumoconiosis in coal miners, pleural cancer from asbestos, and motor vehicle accidents in lorry drivers. In contrast to most other hazards, there was no clear decline in excess mortality attributable to asbestos, or in deaths from sino-nasal cancer associated with exposure to wood dust. The overall decline in mortality attributable to work is likely to reflect reduced employment in more hazardous occupations, as well as improvements in working conditions. It is imperative to ensure that occupational exposures to asbestos and wood dust are now adequately controlled. Further research is needed on accidents involving lorries with the aim of developing more effective strategies for the prevention of injury.

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2013 CFR

2013-04-01

... identified food safety hazards, including as appropriate: (i) Critical control points designed to control... control points designed to control food safety hazards introduced outside the processing plant environment... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2011 CFR

2011-04-01

... identified food safety hazards, including as appropriate: (i) Critical control points designed to control... control points designed to control food safety hazards introduced outside the processing plant environment... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2014 CFR

2014-04-01

... identified food safety hazards, including as appropriate: (i) Critical control points designed to control... control points designed to control food safety hazards introduced outside the processing plant environment... Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF...

Occupational safety and health status of medical laboratories in Kajiado County, Kenya.

PubMed

Tait, Fridah Ntinyari; Mburu, Charles; Gikunju, Joseph

2018-01-01

Despite the increasing interest in Occupational Safety and Health (OSH), seldom studies are available on OSH in medical laboratories from developing countries in general although a high number of injuries occur without proper documentation. It is estimated that every day 6,300 people die as a result of occupational accidents or work-related diseases resulting in over 2.3 million deaths per year. Medical laboratories handle a wide range of materials, potentially dangerous pathogenic agents and exposes health workers to numerous potential hazards. This study evaluated the status of OSH in medical laboratories in Kajiado County, Kenya. The objectives included establishment of biological, chemical and physical hazards; reviewing medical laboratories control measures; and enumerating factors hindering implementation of good practices in OSH. This was a cross-sectional descriptive study research design. Observation check lists, interview schedules and structured questionnaires were used. The study was carried out in 108 medical laboratories among 204 sampled respondents. Data was analysed using statistical package for social science (SPSS) 20 software. The commonest type of hazards in medical laboratories include; bacteria (80%) for Biological hazards; handling un-labelled and un-marked chemicals (38.2%) for chemical hazards; and laboratory equipment's dangerously placed (49.5%) for Physical hazards. According to Pearson's Product Moment Correlation analysis, not-wearing personal protective equipment's was statistically associated with exposure to hazards. Individual control measures were statistically significant at 0.01 significance level. Only 65.1% of the factors influencing implementation of OSH in medical laboratories were identified. Training has the highest contribution to good OSH practices.

Occupational exposures to respirable crystalline silica during hydraulic fracturing.

PubMed

Esswein, Eric J; Breitenstein, Michael; Snawder, John; Kiefer, Max; Sieber, W Karl

2013-01-01

This report describes a previously uncharacterized occupational health hazard: work crew exposures to respirable crystalline silica during hydraulic fracturing. Hydraulic fracturing involves high pressure injection of large volumes of water and sand, and smaller quantities of well treatment chemicals, into a gas or oil well to fracture shale or other rock formations, allowing more efficient recovery of hydrocarbons from a petroleum-bearing reservoir. Crystalline silica ("frac sand") is commonly used as a proppant to hold open cracks and fissures created by hydraulic pressure. Each stage of the process requires hundreds of thousands of pounds of quartz-containing sand; millions of pounds may be needed for all zones of a well. Mechanical handling of frac sand creates respirable crystalline silica dust, a potential exposure hazard for workers. Researchers at the National Institute for Occupational Safety and Health collected 111 personal breathing zone samples at 11 sites in five states to evaluate worker exposures to respirable crystalline silica during hydraulic fracturing. At each of the 11 sites, full-shift samples exceeded occupational health criteria (e.g., the Occupational Safety and Health Administration calculated permissible exposure limit, the NIOSH recommended exposure limit, or the ACGIH threshold limit value), in some cases, by 10 or more times the occupational health criteria. Based on these evaluations, an occupational health hazard was determined to exist for workplace exposures to crystalline silica. Seven points of dust generation were identified, including sand handling machinery and dust generated from the work site itself. Recommendations to control exposures include product substitution (when feasible), engineering controls or modifications to sand handling machinery, administrative controls, and use of personal protective equipment. To our knowledge, this represents the first systematic study of work crew exposures to crystalline silica during hydraulic fracturing. Companies that conduct hydraulic fracturing using silica sand should evaluate their operations to determine the potential for worker exposure to respirable crystalline silica and implement controls as necessary to protect workers.

An Environmental Impact Assessment of Perfluorocarbon Thermal Working Fluid Use On Board Crewed Spacecraft

NASA Technical Reports Server (NTRS)

Perry, Jay L.; Arnold, William a.

2006-01-01

The design and operation of crewed spacecraft requires identifying and evaluating chemical compounds that may present reactivity and compatibility risks with the environmental control and life support (ECLS) system. Such risks must be understood so that appropriate design and operational controls, including specifying containment levels, can be instituted or an appropriate substitute material selected. Operational experience acquired during the International Space Station (ISS) program has found that understanding ECLS system and environmental impact presented by thermal control system working fluids is imperative to safely operating any crewed space exploration vehicle. Perfluorocarbon fluids are used as working fluids in thermal control fluid loops on board the ISS. Also, payload hardware developers have identified perfluorocarbon fluids as preferred thermal control working fluids. Interest in using perfluorocarbon fluids as thermal control system working fluids for future crewed space vehicles and outposts is high. Potential hazards associated with perfluorocarbon fluids are discussed with specific attention given to engineering assessment of ECLS system compatibility, compatibility testing results, and spacecraft environmental impact. Considerations for perfluorocarbon fluid use on crewed spacecraft and outposts are summarized.

Hazard analysis of Escherichia coli O157:H7 contamination during beef slaughtering in Calvados, France.

PubMed

Guyon, R; Dorey, F; Malas, J P; Leclercq, A

2001-09-01

To identify hazard points and critical points during beef slaughtering, which is a necessary first step toward developing a hazard analysis and critical control point system to control meat contamination by Escherichia coli O157:H7, samples (n = 192) from surfaces, work tops, worker's hands, and beef carcasses were collected from a slaughterhouse in Calvados, France. Five strains of E. coli O157:H7 were isolated from a footbridge and a worker's apron at the preevisceration post and from a worker's hand at the defatting post. Three isolates carried stx2c, eae, and EHEC-hlyA genes and showed similar molecular types by random amplified polymorphic DNA, polymerase chain reaction IS3, and XbaI pulsed-field gel electrophoresis. Thus, this study has shown that preevisceration and defatting post and associated worker's materials are critical points for carcasses contamination by E. coli O157:H7 during beef slaughtering.

46 CFR 194.15-11 - Flushing systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemistry Laboratory and Scientific Laboratory § 194.15-11 Flushing systems. (a) Working spaces in which chemical stores are used shall be equipped with a fresh water supply shower. (b) There shall be a provision for flushing away chemical spills. ...

46 CFR 194.15-11 - Flushing systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemistry Laboratory and Scientific Laboratory § 194.15-11 Flushing systems. (a) Working spaces in which chemical stores are used shall be equipped with a fresh water supply shower. (b) There shall be a provision for flushing away chemical spills. ...

46 CFR 194.15-11 - Flushing systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Chemistry Laboratory and Scientific Laboratory § 194.15-11 Flushing systems. (a) Working spaces in which chemical stores are used shall be equipped with a fresh water supply shower. (b) There shall be a provision for flushing away chemical spills. ...

Site safety plan for Lawrence Livermore National Laboratory CERCLA investigations at site 300. Revision 2

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilmer, J.

Various Department of Energy Orders incorporate by reference, health and safety regulations promulgated by the Occupational Safety and Health Administration (OSHA). One of the OSHA regulations, 29 CFR 1910.120, Hazardous Waste Operations and Emergency Response, requires that site safety plans are written for activities such as those covered by work plans for Site 300 environmental investigations. Based upon available data, this Site Safety Plan (Plan) for environmental restoration has been prepared specifically for the Lawrence Livermore National Laboratory Site 300, located approximately 15 miles east of Livermore, California. As additional facts, monitoring data, or analytical data on hazards are provided,more » this Plan may need to be modified. It is the responsibility of the Environmental Restoration Program and Division (ERD) Site Safety Officer (SSO), with the assistance of Hazards Control, to evaluate data which may impact health and safety during these activities and to modify the Plan as appropriate. This Plan is not `cast-in-concrete.` The SSO shall have the authority, with the concurrence of Hazards Control, to institute any change to maintain health and safety protection for workers at Site 300.« less

The health care work environment and adverse health and safety consequences for nurses.

PubMed

Geiger-Brown, Jeanne; Lipscomb, Jane

2010-01-01

Nurses' working conditions are inextricably linked to the quality of care that is provided to patients and patients' safety. These same working conditions are associated with health and safety outcomes for nurses and other health care providers. This chapter describes aspects of the nursing work environment that have been linked to hazards and adverse exposures for nurses, as well as the most common health and safety outcomes of nursing work. We include studies from 2000 to the present by nurse researchers, studies of nurses as subjects, and studies of workers under similar working conditions that could translate to nurses' work environment. We explore a number of work organization factors including shift work and extended work hours, safety climate and culture, teamwork, and communication. We also describe environmental hazards, including chemical hazards (e.g., waste anesthetics, hazardous drugs, cleaning compounds) and airborne and bloodborne pathogen exposure. Nurses' health and safety outcomes include physical (e.g., musculoskeletal disorders, gastrointestinal, slips, trips and falls, physical assault) and psychosocial outcomes (e.g., burnout, work-family conflict). Finally, we present recommendations for future research to further protect nurses and all health care workers from a range of hazardous working conditions.

Maximum likelihood estimation for Cox's regression model under nested case-control sampling.

PubMed

Scheike, Thomas H; Juul, Anders

2004-04-01

Nested case-control sampling is designed to reduce the costs of large cohort studies. It is important to estimate the parameters of interest as efficiently as possible. We present a new maximum likelihood estimator (MLE) for nested case-control sampling in the context of Cox's proportional hazards model. The MLE is computed by the EM-algorithm, which is easy to implement in the proportional hazards setting. Standard errors are estimated by a numerical profile likelihood approach based on EM aided differentiation. The work was motivated by a nested case-control study that hypothesized that insulin-like growth factor I was associated with ischemic heart disease. The study was based on a population of 3784 Danes and 231 cases of ischemic heart disease where controls were matched on age and gender. We illustrate the use of the MLE for these data and show how the maximum likelihood framework can be used to obtain information additional to the relative risk estimates of covariates.

Multidisciplinary rehabilitation for subacute low back pain: graded activity or workplace intervention or both? A randomized controlled trial.

PubMed

Anema, Johannes R; Steenstra, Ivan A; Bongers, Paulien M; de Vet, Henrica C W; Knol, Dirk L; Loisel, Patrick; van Mechelen, Willem

2007-02-01

Population-based randomized controlled trial. To assess the effectiveness of workplace intervention and graded activity, separately and combined, for multidisciplinary rehabilitation of low back pain (LBP). Effective components for multidisciplinary rehabilitation of LBP are not yet established. Participants sick-listed 2 to 6 weeks due to nonspecific LBP were randomized to workplace intervention (n = 96) or usual care (n = 100). Workplace intervention consisted of workplace assessment, work modifications, and case management involving all stakeholders. Participants still sick-listed at 8 weeks were randomized for graded activity (n = 55) or usual care (n = 57). Graded activity comprised biweekly 1-hour exercise sessions based on operant-conditioning principles. Outcomes were lasting return to work, pain intensity and functional status, assessed at baseline, and at 12, 26, and 52 weeks after the start of sick leave. Time until return to work for workers with workplace intervention was 77 versus 104 days (median) for workers without this intervention (P = 0.02). Workplace intervention was effective on return to work (hazard ratio = 1.7; 95% CI, 1.2-2.3; P = 0.002). Graded activity had a negative effect on return to work (hazard ratio = 0.4; 95% CI, 0.3-0.6; P < 0.001) and functional status. Combined intervention had no effect. Workplace intervention is advised for multidisciplinary rehabilitation of subacute LBP. Graded activity or combined intervention is not advised.

Register-based data of psychosocial working conditions and occupational groups as predictors of disability pension due to musculoskeletal diagnoses: a prospective cohort study of 24 543 Swedish twins

PubMed Central

2013-01-01

Background Occupations and psychosocial working conditions have rarely been investigated as predictors of disability pension in population-based samples. This study investigated how occupational groups and psychosocial working conditions are associated with future disability pension due to musculoskeletal diagnoses, accounting for familial factors in the associations. Methods A sample of 24 543 same-sex Swedish twin individuals was followed from 1993 to 2008 using nationwide registries. Baseline data on occupations were categorized into eight sector-defined occupational groups. These were further used to reflect psychosocial working conditions by applying the job strain scores of a Job Exposure Matrix. Cox proportional hazard ratios (HR) were estimated. Results During the 12-year (average) follow-up, 7% of the sample was granted disability pension due to musculoskeletal diagnoses. Workers in health care and social work; agriculture, forestry and fishing; transportation; production and mining; and the service and military work sectors were two to three times more likely to receive a disability pension than those in the administration and management sector. Each single unit decrease in job demands and each single unit increase in job control and social support significantly predicted disability pension. Individuals with high work strain or an active job had a lower hazard ratio of disability pension, whereas a passive job predicted a significantly higher hazard ratio. Accounting for familial confounding did not alter these results. Conclusion Occupational groups and psychosocial working conditions seem to be independent of familial confounding, and hence represent risk factors for disability pension due to musculoskeletal diagnoses. This means that preventive measures in these sector-defined occupational groups and specific psychosocial working conditions might prevent disability pension due to musculoskeletal diagnoses. PMID:24040914

Register-based data of psychosocial working conditions and occupational groups as predictors of disability pension due to musculoskeletal diagnoses: a prospective cohort study of 24,543 Swedish twins.

PubMed

Ropponen, Annina; Samuelsson, Åsa; Alexanderson, Kristina; Svedberg, Pia

2013-09-16

Occupations and psychosocial working conditions have rarely been investigated as predictors of disability pension in population-based samples. This study investigated how occupational groups and psychosocial working conditions are associated with future disability pension due to musculoskeletal diagnoses, accounting for familial factors in the associations. A sample of 24,543 same-sex Swedish twin individuals was followed from 1993 to 2008 using nationwide registries. Baseline data on occupations were categorized into eight sector-defined occupational groups. These were further used to reflect psychosocial working conditions by applying the job strain scores of a Job Exposure Matrix. Cox proportional hazard ratios (HR) were estimated. During the 12-year (average) follow-up, 7% of the sample was granted disability pension due to musculoskeletal diagnoses. Workers in health care and social work; agriculture, forestry and fishing; transportation; production and mining; and the service and military work sectors were two to three times more likely to receive a disability pension than those in the administration and management sector. Each single unit decrease in job demands and each single unit increase in job control and social support significantly predicted disability pension. Individuals with high work strain or an active job had a lower hazard ratio of disability pension, whereas a passive job predicted a significantly higher hazard ratio. Accounting for familial confounding did not alter these results. Occupational groups and psychosocial working conditions seem to be independent of familial confounding, and hence represent risk factors for disability pension due to musculoskeletal diagnoses. This means that preventive measures in these sector-defined occupational groups and specific psychosocial working conditions might prevent disability pension due to musculoskeletal diagnoses.

77 FR 19306 - Announcement of Funding Awards: Office of Healthy Homes and Lead Hazard Control Grant Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... Federal Register notice published on May 18, 2011 for Lead Based Paint Hazard Control and Lead Hazard... Based Paint Hazard Control Grant Program A total of $43,206,000 was awarded to 22 grantees for the Lead Based Paint Hazard Control Grant Program and an additional $1,999,971 was awarded to 20 out of the 29...

77 FR 19305 - Announcement of Funding Awards: Office of Healthy Homes and Lead Hazard Control Grant Programs...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... Federal Register notice published on September 9, 2010 for Lead Based Paint Hazard Control and Lead Hazard... follows: 1. Lead Based Paint Hazard Control Grant Program A total of $69,700,000 was awarded to 29 grantees for the Lead Based Paint Hazard Control Grant Program and an additional $2,388,637 was awarded to...

30 CFR 56.3200 - Correction of hazardous conditions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... to persons shall be taken down or supported before other work or travel is permitted in the affected... Section 56.3200 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Ground Control...

40 CFR 63.4493 - What work practice standards must I meet?

Code of Federal Regulations, 2010 CFR

2010-07-01

... National Emission Standards for Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products... materials used in, and waste materials generated by the controlled coating operation(s) for which you use..., thinners and/or other additives, cleaning materials, and waste materials must be stored in closed...

40 CFR 63.7886 - What are the general standards I must meet for my affected remediation material management units?

Code of Federal Regulations, 2013 CFR

2013-07-01

... required air pollution controls or have implemented the required work practice to reduce HAP emissions to... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for...

40 CFR 63.7886 - What are the general standards I must meet for my affected remediation material management units?

Code of Federal Regulations, 2012 CFR

2012-07-01

... required air pollution controls or have implemented the required work practice to reduce HAP emissions to... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for...

40 CFR 63.7886 - What are the general standards I must meet for my affected remediation material management units?

Code of Federal Regulations, 2014 CFR

2014-07-01

... required air pollution controls or have implemented the required work practice to reduce HAP emissions to... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for...

40 CFR 63.7886 - What are the general standards I must meet for my affected remediation material management units?

Code of Federal Regulations, 2011 CFR

2011-07-01

... required air pollution controls or have implemented the required work practice to reduce HAP emissions to... Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for...

Electrical Safety: Safety and Health for Electrical Trades. Student Manual.

ERIC Educational Resources Information Center

Fowler, Thaddeus W.; Miles, Karen K.

This document is designed to teach learners in secondary and postsecondary electrical trades courses to recognize, evaluate, and control hazards associated with electrical work, The manual's eight sections each include some or all of the following components: instructional text; definitions; case studies illustrating key safety considerations;…

29 CFR 1915.85 - Vessel radar and communication systems.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Vessel radar and communication systems. 1915.85 Section... Working Conditions § 1915.85 Vessel radar and communication systems. (a) The employer shall service each vessel's radar and communication systems in accordance with 29 CFR 1915.89, Control of Hazardous Energy...

29 CFR 1915.85 - Vessel radar and communication systems.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Vessel radar and communication systems. 1915.85 Section... Working Conditions § 1915.85 Vessel radar and communication systems. (a) The employer shall service each vessel's radar and communication systems in accordance with 29 CFR 1915.89, Control of Hazardous Energy...

7 CFR 2.42 - Administrator, Farm Service Agency.

Code of Federal Regulations, 2010 CFR

2010-01-01

... release of a hazardous substance, pollutant, or contaminant into the environment; (ii) Sections 104(e)-(h... Water Pollution Prevention and Control Act, as amended (33 U.S.C. 1251 et seq.); (iii) Safe Drinking... coordinate land retirement and agricultural working land conservation programs under section 2005 (16 U.S.C...

NIOSH field studies team assessment: Worker exposure to aerosolized metal oxide nanoparticles in a semiconductor fabrication facility.

PubMed

Brenner, Sara A; Neu-Baker, Nicole M; Eastlake, Adrienne C; Beaucham, Catherine C; Geraci, Charles L

2016-11-01

The ubiquitous use of engineered nanomaterials-particulate materials measuring approximately 1-100 nanometers (nm) on their smallest axis, intentionally engineered to express novel properties-in semiconductor fabrication poses unique issues for protecting worker health and safety. Use of new substances or substances in a new form may present hazards that have yet to be characterized for their acute or chronic health effects. Uncharacterized or emerging occupational health hazards may exist when there is insufficient validated hazard data available to make a decision on potential hazard and risk to exposed workers under condition of use. To advance the knowledge of potential worker exposure to engineered nanomaterials, the National Institute for Occupational Safety and Health Nanotechnology Field Studies Team conducted an on-site field evaluation in collaboration with on-site researchers at a semiconductor research and development facility on April 18-21, 2011. The Nanomaterial Exposure Assessment Technique (2.0) was used to perform a complete exposure assessment. A combination of filter-based sampling and direct-reading instruments was used to identify, characterize, and quantify the potential for worker inhalation exposure to airborne alumina and amorphous silica nanoparticles associated with th e chemical mechanical planarization wafer polishing process. Engineering controls and work practices were evaluated to characterize tasks that might contribute to potential exposures and to assess existing engineering controls. Metal oxide structures were identified in all sampling areas, as individual nanoparticles and agglomerates ranging in size from 60 nm to >1,000 nm, with varying structure morphology, from long and narrow to compact. Filter-based samples indicated very little aerosolized material in task areas or worker breathing zone. Direct-reading instrument data indicated increased particle counts relative to background in the wastewater treatment area; however, particle counts were very low overall, indicating a well-controlled working environment. Recommendations for employees handling or potentially exposed to engineered nanomaterials include hazard communication, standard operating procedures, conservative ventilation systems, and prevention through design in locations where engineered nanomaterials are used or stored, and routine air sampling for occupational exposure assessment and analysis.

Does workplace social capital associate with hazardous drinking among Chinese rural-urban migrant workers?

PubMed

Gao, Junling; Weaver, Scott R; Fua, Hua; Pan, Zhigang

2014-01-01

The present study sought to investigate the associations between workplace social capital and hazardous drinking (HD) among Chinese rural-urban migrant workers (RUMW). A cross sectional study with a multi-stage stratified sampling procedure was conducted in Shanghai during July 2012 to January 2013. In total, 5,318 RUMWs from 77 workplaces were involved. Work-place social capital was assessed using a validated and psychometrically tested eight-item measure. The Chinese version of Alcohol Use Disorders Identification Test (AUDIT) was used to assess hazardous drinking. Control variables included gender, age, marital status, education level, salary, and current smoking. Multilevel logistic regression analysis was conducted to test whether individual- and workplace-level social capital was associated with hazardous drinking. Overall, the prevalence of HD was 10.6%. After controlling for individual-level socio-demographic and lifestyle variables, compared to workers in the highest quartile of individual-level social capital, the odds of HD for workers in the three bottom quartiles were 1.13(95%CI: 1.04-1.23), 1.17(95%CI: 1.05-1.56) and 1.26(95%CI: 1.13-1.72), respectively. However, contrary to hypothesis, there was no relationship between workplace-level social capital and hazardous drinking. Higher individual-level social capital may protect against HD among Chinese RUMWs. Interventions to build individual social capital among RUMWs in China may help reduce HD among this population.

Examining occupational health and safety vulnerability among Canadian workers with disabilities.

PubMed

Breslin, F Curtis; Lay, A Morgan; Jetha, Arif; Smith, Peter

2017-05-26

To compare workers with and without disabilities on their reported workplace hazard exposure and the presence of occupational health and safety vulnerability factors. Working-aged adults in Ontario or British Columbia were recruited to participate in a cross-sectional survey (n = 1988). Self-reported measures included demographic factors, work-related variables, perceived level of activity limitation at work, and presence of work safety vulnerability factors utilizing a novel framework. Reporting a disability at work was significantly associated with greater hazard exposure than those without a disability. In addition, those reporting a disability at work were more likely to be employed in conditions where hazard exposure was combined with inadequate policies and procedures, or hazard exposures were combined with inadequate empowerment. Work safety vulnerability is one way that health inequalities can be perpetuated even among those with disabilities who have found work. Our results suggest that employers and policy makers need to focus on assessing and addressing hazard exposures and targeting occupational health and safety resources in the workplace in a way that includes workers with disabilities. Implications for Rehabilitation Workers with disabilities experience greater hazard exposure than those without a disability. Those with moderate and severe disabilities reported occupational health and safety vulnerability, suggesting that workplace accommodations should be available to a broader range of disability levels. It appears that, above and beyond standard safety procedures, providing workplace accommodations for people with disabilities may further reduce their hazard exposure and improve their safety.

A model of Occupational Safety and Health Management System (OSHMS) for promoting and controlling health and safety in textile industry.

PubMed

Manimaran, S; Rajalakshmi, R; Bhagyalakshmi, K

2015-01-01

The development of Occupational Safety and Health Management System in textile industry will rejuvenate the workers and energize the economy as a whole. In India, especially in Tamil Nadu, approximately 1371 textile business is running with the help of 38,461 workers under Ginning, Spinning, Weaving, Garment and Dyeing sectors. Textile industry of contributes to the growth of Indian economy but it fails to foster education and health as key components of human development and help new democracies. The present work attempts to measure and develop OSHMS which reduce the hazards and risk involved in textile industry. Among all other industries textile industry is affected by enormous hazards and risk because of negligence by management and Government. It is evident that managements are not abiding by law when an accident has occurred. Managements are easily deceiving workers and least bothered about the Quality of Work Life (QWL). A detailed analysis of factors promoting safety and health to the workers has been done by performing confirmatory factor analysis, evaluating Risk Priority Number and the framework of OHMS has been conceptualized using Structural Equation Model. The data have been collected using questionnaire and interview method. The study finds occupation health for worker in Textile industry is affected not only by safety measure but also by technology and management. The work shows that difficulty in identifying the cause and effect of hazards, the influence of management in controlling and promoting OSHMS under various dimensions. One startling fact is existence of very low and insignificance correlation between health factors and outcome.

Lessons Learned "Establishing an Electrically Safe Work Condition" Specifically related to Racking Electrical Breakers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Martinez, Tommy Robert; Romero, Philbert Roland; Garcia, Samuel Anthony

During low voltage electrical equipment maintenance, a bad breaker was identified. The breaker was racked out from the substation cubicle without following the hazardous energy control process identified in the Integrated Work Document (IWD). The IWD required the substation to be in an electrically safe work condition prior to racking the breaker. Per NFPA 70E requirements, electrical equipment shall be put into an electrically safe work condition before an employee performs work on or interacts with equipment in a manner that increases the likelihood of creating an arc flash. Racking in or out a breaker on an energized bus maymore » increase the likelihood of creating an arc flash dependent on equipment conditions. A thorough risk assessment must be performed prior to performing such a task. The risk assessment determines the risk control measures to be put in place prior to performing the work. Electrical Safety Officers (ESO) can assist in performing risk assessments and incorporating risk control measures.« less

Review of Studies of Mechanoelectrical Transformations in Rocks in Russia and Abroad

NASA Astrophysics Data System (ADS)

Pomishin, E.; Yavorovich, L.

2016-06-01

The problem of monitoring and forecast of dynamic manifestations of rock masses becomes immediate in the mining industry because of the growth of mining work intensity and changeover to the mining operations in deeper levels. The article presents a short review of the scientific works of foreign researchers for more complete and in-depth study of geophysical methods of control of the stress-strain state and bump hazard of rock masses.

Self-reported musculoskeletal disorder pain: The role of job hazards and work-life interaction.

PubMed

Weale, Victoria P; Wells, Yvonne; Oakman, Jodi

2018-02-01

Previous research identified an association between work-family conflict and musculoskeletal pain. This study explores how the work-life interface might affect pain experienced by residential aged care staff. A cross-sectional survey of 426 employees in residential aged care was analyzed to assess the impacts of workplace hazards, work-family conflict, and work-life balance on self-reported musculoskeletal pain. Work-family conflict acts as a mediator of the relationships between workplace hazards and the total number of body regions at which musculoskeletal pain was experienced. Work-life balance only acts as a mediator for particular hazards and only if work-family conflict is not taken into account. Addressing work-life interaction, and in particular work-family conflict, warrants further investigation as a legitimate means through which musculoskeletal disorder risk can be reduced. Policies and practices to improve work-life interaction and reduce work-family conflict should be considered as integral components of musculoskeletal disorder risk management strategies. © 2017 Wiley Periodicals, Inc.

The morphological changes of mucous membrane of stomach and duodenum of contractor organization personnel, which works in radiation hazard conditions at the object Shelter of Chornobyl NPP.

PubMed

Sushko, V O; Nezgovorova, G A; Degtjarova, L V; Kolosynska, O O; Gromadska, V M

2015-12-01

Аim: The determination of morphological features of stomach and duodenum mucous of membrane (MM) damage at a personnel that works in radiation hazard conditions at the object of "Shelter" of Chornobyl NPP (OS) by the endoscopic monitoring with biopsy material inspection from a gastro-duodenal zone on the stages of check - in (InC) and the special medical control (SpC). the complex clinical-endoscopic and morphological examination with the biopsy of MM of stomach and duodenum in 126 workers of OS (man in the age from 20 to 59) was carried out. Doses of external radiation exposure were from 0,14 to 79,6 mSv, доза internal radiation exposure were from 0,1 to 3 mSv/Results: For the personnel of OS contract organisations differently directed pathomorphological changes of MM at InC and increase of frequency of their exposure at an inspection during SC, that generally correspond to chronic H.pylori-associated pangastritis with violation of microcirculation and trophism, disregeneration changes of epithelial layer. for the personnel of contract organizations, which participated in radiation hazard works on ОS a presence of chronic H.pylori-associated pangastritis with the increase of frequency of atrophic changes of MM (nonmetaplastic or metaplastic type) and development of erosive-ulcerous defects of gastro-duodenal zone was founded out.For workers, who had previous influence of ionizing irradiation the greater frequency of disregeneration (hyperplasia / intestinal metaplasia) changes of epithelium that accordingly promotes the risk of neoplasmes transformations was clarified.Providing of EGDFS (at a necessity with the biopsy of MM) is at InC and next stages of medical control for personnel, that executes radiation hazard works on ОS is the highly informative evidential and necessary method of inspection for determination of form and degree of pathological changes of overhead departments of gastrointestinal tract for warning of progress of disease and development of complications, maintenance of workers health and workability. V. O. Sushko, G. A. Nezgovorova, L. V. Degtjarova, O. O.Kolosynska, V. M.Gromadska.

The Federal Aviation Administration/Massachusetts Institute of Technology (FAA/MIT) Lincoln Laboratory Doppler weather radar program

NASA Technical Reports Server (NTRS)

Evans, James E.

1988-01-01

The program focuses on providing real-time information on hazardous aviation weather to end users such as air traffic control and pilots. Existing systems will soon be replaced by a Next Generation Weather Radar (NEXRAD), which will be concerned with detecting such hazards as heavy rain and hail, turbulence, low-altitude wind shear, and mesocyclones and tornadoes. Other systems in process are the Central Weather Processor (CWP), and the terminal Doppler weather radar (TDWR). Weather measurements near Memphis are central to ongoing work, especially in the area of microbursts and wind shear.

Investigation of air transportation technology at Princeton University, 1992-1993

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1994-01-01

The Air Transportation Research Program at Princeton University proceeded along five avenues during the past year: (1) Flight Control System Robustness; (2) Microburst Hazards to Aircraft; (3) Wind Rotor Hazards to Aircraft; (4) Intelligent Aircraft/Airspace Systems; and (5) Aerospace Optical Communications. This research resulted in a number of publications, including theses, archival papers, and conference papers. An annotated bibliography of publications that appeared between June 1992 and June 1993 is included. The research that these papers describe was supported in whole or in part by the Joint University Program, including work that was completed prior to the reporting period.

Health-hazard evaluation determination report No. 75-91-489, Alcoa Aluminum Company, Warrick Operations, Newburgh, Indiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-05-01

A health-hazard evaluation, including mortality and follow-up environmental studies of worker exposure to oil mists, coal tar pitch volatiles (CTPV), and carbon monoxide in the rolling mills of the Alcoa Aluminum Company Warrick Operations, Newburgh, Indiana was conducted. The mortality study was inconclusive due to the small number of expected deaths and inaccurate medical histories. It was impossible to determine if Alcoa employees who died from cancer or ischemic heart disease did so as a result of their work exposure. Results of sampling indicate that employees working in the anode block fabrication and kiln area were exposed to hazardous levelsmore » of CTPV as cyclohexane solubles. Fifteen of 17 extracts contained benzo(a)pyrene. Employees were not exposed to hazardous levels of carbon monoxide and those in the hot mill area and cold mill oil houses were not exposed to oil mist at concentrations which would be expected to result in long-term adverse health effects. Recommendations included: pre-employment and periodic physical examination; environmental monitoring, effective engineering, and administrative controls to reduce exposure to CTPV to the lowest extent possible; disposable protective clothes for workers exposed to CTPV; and prompt decontamination of skin exposed to CTPV.« less

77 FR 65574 - Notice of Proposed Information Collection: Healthy Homes and Lead Hazard Control Programs Data...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-29

... Information Collection: Healthy Homes and Lead Hazard Control Programs Data Collection--Progress Reporting AGENCY: Office of Healthy Homes and Lead Hazard Control, HUD. ACTION: Notice. SUMMARY: The revised... of Healthy Homes and Lead Hazard Control, Department of Housing and Urban Development, 451 7th Street...

78 FR 69604 - Current Good Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-20

... Manufacturing Practice and Hazard Analysis and Risk- Based Preventive Controls for Human Food; Extension of... Hazard Analysis and Risk- Based Preventive Controls for Human Food'' and its information collection... Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for Human Food.'' IV. How To...

Fire Detection Tradeoffs as a Function of Vehicle Parameters

NASA Technical Reports Server (NTRS)

Urban, David L.; Dietrich, Daniel L.; Brooker, John E.; Meyer, Marit E.; Ruff, Gary A.

2016-01-01

Fire survivability depends on the detection of and response to a fire before it has produced an unacceptable environment in the vehicle. This detection time is the result of interplay between the fire burning and growth rates; the vehicle size; the detection system design; the transport time to the detector (controlled by the level of mixing in the vehicle); and the rate at which the life support system filters the atmosphere, potentially removing the detected species or particles. Given the large differences in critical vehicle parameters (volume, mixing rate and filtration rate) the detection approach that works for a large vehicle (e.g. the ISS) may not be the best choice for a smaller crew capsule. This paper examines the impact of vehicle size and environmental control and life support system parameters on the detectability of fires in comparison to the hazard they present. A lumped element model was developed that considers smoke, heat, and toxic product release rates in comparison to mixing and filtration rates in the vehicle. Recent work has quantified the production rate of smoke and several hazardous species from overheated spacecraft polymers. These results are used as the input data set in the lumped element model in combination with the transport behavior of major toxic products released by overheating spacecraft materials to evaluate the necessary alarm thresholds to enable appropriate response to the fire hazard.

Timing of Formal Phase Safety Reviews for Large-Scale Integrated Hazard Analysis

NASA Technical Reports Server (NTRS)

Massie, Michael J.; Morris, A. Terry

2010-01-01

Integrated hazard analysis (IHA) is a process used to identify and control unacceptable risk. As such, it does not occur in a vacuum. IHA approaches must be tailored to fit the system being analyzed. Physical, resource, organizational and temporal constraints on large-scale integrated systems impose additional direct or derived requirements on the IHA. The timing and interaction between engineering and safety organizations can provide either benefits or hindrances to the overall end product. The traditional approach for formal phase safety review timing and content, which generally works well for small- to moderate-scale systems, does not work well for very large-scale integrated systems. This paper proposes a modified approach to timing and content of formal phase safety reviews for IHA. Details of the tailoring process for IHA will describe how to avoid temporary disconnects in major milestone reviews and how to maintain a cohesive end-to-end integration story particularly for systems where the integrator inherently has little to no insight into lower level systems. The proposal has the advantage of allowing the hazard analysis development process to occur as technical data normally matures.

5 CFR Appendix A to Subpart E of... - Schedule of Environmental Differentials Paid for Exposure to Various Degrees of Hazards, Physical...

Code of Federal Regulations, 2010 CFR

2010-01-01

... diving research tests which seek to establish limits for safe pressure profiles by working in a pressure... Paid for Exposure to Various Degrees of Hazards, Physical Hardships, and Working Conditions of an... to Various Degrees of Hazards, Physical Hardships, and Working Conditions of an Unusual Nature This...

Unequal exposure to ecological hazards: environmental injustices in the Commonwealth of Massachusetts.

PubMed Central

Faber, Daniel R; Krieg, Eric J

2002-01-01

This study analyzes the social and geographic distribution of ecological hazards across 368 communities in the Commonwealth of Massachusetts. Combining census data with a variety of environmental data, we tested for and identified both income-based and racially based biases to the geographic distribution of 17 different types of environmentally hazardous sites and industrial facilities. We also developed a composite measure of cumulative exposure to compare the relative overall risks characteristic of each community. To the best of our knowledge, this point system makes this the first environmental justice study to develop a means for measuring and ranking cumulative exposure for communities. The study also controls for the intensity of hazards in each community by accounting for the area across which hazards are distributed. The findings indicate that ecologically hazardous sites and facilities are disproportionately located and concentrated in communities of color and working-class communities. The implication of this research for policymakers and citizen advocates is that cumulative exposure of residents to environmentally hazardous facilities and sites should receive greater consideration regarding community demographics and environmental health indicators. We conclude that the provision of additional resources for environmental monitoring and ranking, as well as yearly progress reports, is necessary for communities and state agencies to achieve equal access to clean and healthy environments for all residents. PMID:11929739

A case-control study of eye injuries in the workplace in Hong Kong.

PubMed

Yu, Tak Sun Ignatius; Liu, Hongjie; Hui, Karen

2004-01-01

Eye injury in the workplace is common worldwide. This study proposed to explore both risk and preventive factors re eye injuries in Hong Kong. Case-control study. A total of 239 work-related eye injury patients, and 253 subjects without a history of any eye injury as controls. Patients with all incident cases of work-related eye injuries attending the ophthalmology clinics of 3 major public hospitals in Hong Kong during the first 3 months of 2000 were invited to participate. Controls were selected from the general population and were frequency matched to patients based on gender. Patients were interviewed face-to-face by trained interviewers in the ophthalmology clinics, using a structured questionnaire. Telephone interviews were used for controls. Risk and protective factors associated with eye injuries. Among eye injury cases, 158 patients (66.1%) reported having incurred 1 episode of eye injury during employment, 49 (20.5%) having suffered 2 episodes, and 32 (13.4%) having experienced >/==" BORDER="0">3 eye injuries at work. Most of the patients (85.4%) did not wear any protective devices at the time of injury. Subjects who wore safety glasses regularly were less likely to have eye injuries (odds ratio [OR] = 0.29, 95% confidence interval [CI] = 0.14-0.62). Having a safety requirement for wearing safety glasses was negatively associated with eye injuries (OR = 0.31, 95% CI = 0.15-0.62). Multivariate analysis indicated that exposures to certain work hazards and working in the construction industry were positively associated with eye injuries. Subjects who worked longer in their current job, who reported having received job safety training before employment, or whose machines or equipment were maintained or repaired regularly by employers were at lower risk of experiencing eye injuries. Construction workers and those exposed to multiple hazards may get eye injuries at work. They should be provided with protective devices that are effective in preventing such exposures. Health education and safety training are important in preventing eye injuries. Maintenance and repair of machines and equipment may effectively reduce or eliminate the sources of exposures.

Psychosocial work environment and health in U.S. metropolitan areas: a test of the demand-control and demand-control-support models.

PubMed

Muntaner, C; Schoenbach, C

1994-01-01

The authors use confirmatory factor analysis to investigate the psychosocial dimensions of work environments relevant to health outcomes, in a representative sample of five U.S. metropolitan areas. Through an aggregated inference system, scales from Schwartz and associates' job scoring system and from the Dictionary of Occupational Titles (DOT) were employed to examine two alternative models: the demand-control model of Karasek and Theorell and Johnson's demand-control-support model. Confirmatory factor analysis was used to test the two models. The two multidimensional models yielded better fits than an unstructured model. After allowing for the measurement error variance due to the method of assessment (Schwartz and associates' system or DOT), both models yielded acceptable goodness-of-fit indices, but the fit of the demand-control-support model was significantly better. Overall these results indicate that the dimensions of Control (substantive complexity of work, skill discretion, decision authority), Demands (physical exertion, physical demands and hazards), and Social Support (coworker and supervisor social supports) provide an acceptable account of the psychosocial dimensions of work associated with health outcomes.

Serum total immunoglobin-E and health hazards in workers involved in land fill and compost areas of hazardous waste management plants

PubMed Central

Kalahasthi, Ravi Babu; Rajmohan, HR; Narendranan, Pavitra; Pradyumna, Adithya

2012-01-01

Background: The exposures of bio-aerosols have reported higher occupational health hazards, the association between serum total IgE levels and job categories and occupational health hazards of waste disposal area was limited. The present study was undertaken to assess the relationship between occupational health hazards and Serum total IgE in waste disposal area. Materials and Methods: One hundred eighty subjects working in waste disposal areas in different parts of Bangalore at Karnataka, India were enrolled into the study in 2009. Using questionnaire the respiratory morbidity and other work related problems in HWW was carried. The levels of serum total IgE in study subjects were determined by using Enzyme–linked –immunosorbent assay kits (DRG International Inc, USA). The differences of serum total IgE levels between the groups were computed by using non-parametric Mann-Whitney U test. SPSS 10.0 for windows version of statistical software was used in the analysis. Results: The levels of serum total IgE was significantly increased in landfill area (P=0.027) compose plant workers (P=0.020). The morbidity conditions such as respiratory and musculoskeletal found significantly higher in waste disposal workers as compared to controls. Conclusion: The levels of serum total IgE was significantly increased in land fill area and compose plant workers but no significant relationship was found between the levels of serum total IgE and occurrence of health related symptoms or past respiratory disease. PMID:23112500

Serum total immunoglobin-E and health hazards in workers involved in land fill and compost areas of hazardous waste management plants.

PubMed

Kalahasthi, Ravi Babu; Rajmohan, Hr; Narendranan, Pavitra; Pradyumna, Adithya

2012-01-01

The exposures of bio-aerosols have reported higher occupational health hazards, the association between serum total IgE levels and job categories and occupational health hazards of waste disposal area was limited. The present study was undertaken to assess the relationship between occupational health hazards and Serum total IgE in waste disposal area. One hundred eighty subjects working in waste disposal areas in different parts of Bangalore at Karnataka, India were enrolled into the study in 2009. Using questionnaire the respiratory morbidity and other work related problems in HWW was carried. The levels of serum total IgE in study subjects were determined by using Enzyme-linked -immunosorbent assay kits (DRG International Inc, USA). The differences of serum total IgE levels between the groups were computed by using non-parametric Mann-Whitney U test. SPSS 10.0 for windows version of statistical software was used in the analysis. The levels of serum total IgE was significantly increased in landfill area (P=0.027) compose plant workers (P=0.020). The morbidity conditions such as respiratory and musculoskeletal found significantly higher in waste disposal workers as compared to controls. The levels of serum total IgE was significantly increased in land fill area and compose plant workers but no significant relationship was found between the levels of serum total IgE and occurrence of health related symptoms or past respiratory disease.

Heavy Metal Risk Management: Case Analysis

PubMed Central

Kim, Ji Ae; Lee, Seung Ha; Choi, Seung Hyun; Jung, Ki Kyung; Park, Mi Sun; Jeong, Ji Yoon; Hwang, Myung Sil; Yoon, Hae Jung; Choi, Dal Woong

2012-01-01

To prepare measures for practical policy utilization and the control of heavy metals, hazard control related institutions by country, present states of control by country, and present states of control by heavy metals were examined. Hazard control cases by heavy metals in various countries were compared and analyzed. In certain countries (e.g., the U.S., the U.K., and Japan), hazardous substances found in foods (e.g., arsenic, lead, cadmium, and mercury) are controlled. In addition, the Joint FAO/WHO Expert Committee on Food Additives (JECFA) recommends calculating the provisional tolerable weekly intake (PTWI) of individual heavy metals instead of the acceptable daily intake (ADI) to compare their pollution levels considering their toxicity accumulated in the human body. In Korea, exposure assessments have been conducted, and in other countries, hazardous substances are controlled by various governing bodies. As such, in Korea and other countries, diverse food heavy metal monitoring and human body exposure assessments are conducted, and reducing measures are prepared accordingly. To reduce the danger of hazardous substances, many countries provide leaflets and guidelines, develop hazardous heavy metal intake recommendations, and take necessary actions. Hazard control case analyses can assist in securing consumer safety by establishing systematic and reliable hazard control methods. PMID:24278603

Effective standards and regulatory tools for respiratory gas monitors and pulse oximeters: the role of the engineer and clinician.

PubMed

Weininger, Sandy

2007-12-01

Developing safe and effective medical devices involves understanding the hazardous situations that can arise in clinical practice and implementing appropriate risk control measures. The hazardous situations may have their roots in the design or in the use of the device. Risk control measures may be engineering or clinically based. A multidisciplinary team of engineers and clinicians is needed to fully identify and assess the risks and implement and evaluate the effectiveness of the control measures. In this paper, I use three issues, calibration/accuracy, response time, and protective measures/alarms, to highlight the contributions of these groups. This important information is captured in standards and regulatory tools to control risk for respiratory gas monitors and pulse oximeters. This paper begins with a discussion of the framework of safety, explaining how voluntary standards and regulatory tools work. The discussion is followed by an examination of how engineering and clinical knowledge are used to support the assurance of safety.

78 FR 24691 - Current Good Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-26

... Manufacturing Practice and Hazard Analysis and Risk- Based Preventive Controls for Human Food; Extension of... Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for Human Food'' that appeared in... Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for Human Food'' with a 120-day...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Godby, M.; Ugolini, C.; Lyman, M.

In response to a request from the Allied Industrial Workers Union, an investigation was begun into possible hazardous working conditions at Bryan Custom Plastics (SIC-3089), Bryan, Ohio. The company manufactured plastic television cabinets and interior automotive door panels by an extrusion molding process. Full shift, personal breathing zone and area sampling revealed no excess levels of exposure to total paint mist, toluene, xylene, ethyl-benzene, methyl-methacrylate, methyl-ethyl-ketone, methyl-isobutyl-ketone, or n-butanol. Carbon-monoxide concentrations ranged up to 34 and 90 parts per million in the spray finishing areas and quality control areas, respectively. The author concludes that health hazards from exposure to airbornemore » particulates and organic solvents were not found at the time of the survey. There was a potential for overexposures to carbon-monoxide. The author recommends that carbon-monoxide levels be reduced, and work practices improved.« less

[Audiometry in the cellulose industry].

PubMed

Corrao, C R; Milano, L; Pedulla, P; Carlesi, G; Bacaloni, A; Monaco, E

1993-01-01

A noise level dosimetry and audiometric testing were conducted in a cellulose factory to determine the hazardous noise level and the prevalence of noise induced hearing loss among the exposed workers. The noise level was recorded up to 90 db (A) in several working areas. 18 workers, potentially exposed to noise injury, evidenced a significant hearing loss. While no evidence of noise injury was recorded in a control group of 100 subjects. This finding suggest a strict relationship between audiometric tests, the noise level recorded in the working place and the working seniority of exposed employers.

Use of a Modern Polymerization Pilot-Plant for Undergraduate Control Projects.

ERIC Educational Resources Information Center

Mendoza-Bustos, S. A.; And Others

1991-01-01

Described is a project where students gain experience in handling large volumes of hazardous materials, process start up and shut down, equipment failures, operational variations, scaling up, equipment cleaning, and run-time scheduling while working in a modern pilot plant. Included are the system design, experimental procedures, and results. (KR)

Development of a Two-Year Associate Arts Degree in Environmental Health Technology.

ERIC Educational Resources Information Center

Campbell, Charles R.

The field of Environmental Health Technology (EHT) encompasses both the equipment and the trained expertise required to utilize land, water, energy, and minerals in the service of human health and welfare. EHT technicians work in disease control, licensing bureaus, hospitals, nursing homes, hazardous waste agencies, and other health agencies. In…

Emergency Medical Operations at Kennedy Space Center in Support of Space Shuttle

NASA Technical Reports Server (NTRS)

Myers, K. Jeffrey; Tipton, David A.; Woodard, Daniel; Long, Irene D.

1992-01-01

The unique environment of the Kennedy Space Center includes a wide variety of industrial processes culminating in launch and spaceflight. Many are potentially hazardous to the work force and the astronauts. Technology, planning, training, and quality control are utilized to prevent contingencies and expedite response should a contingency occur.

40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

Code of Federal Regulations, 2012 CFR

2012-07-01

... control data and, if used, the serial number of any x-ray fluorescence (XRF) device. (ix) Specific..., a lead hazard screen shall be conducted as follows: (i) Background information regarding the... this section. Additionally, any background information collected pursuant to paragraph (c)(2)(i) of...

40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

Code of Federal Regulations, 2014 CFR

2014-07-01

... control data and, if used, the serial number of any x-ray fluorescence (XRF) device. (ix) Specific..., a lead hazard screen shall be conducted as follows: (i) Background information regarding the... this section. Additionally, any background information collected pursuant to paragraph (c)(2)(i) of...

40 CFR 745.227 - Work practice standards for conducting lead-based paint activities: target housing and child...

Code of Federal Regulations, 2013 CFR

2013-07-01

... control data and, if used, the serial number of any x-ray fluorescence (XRF) device. (ix) Specific..., a lead hazard screen shall be conducted as follows: (i) Background information regarding the... this section. Additionally, any background information collected pursuant to paragraph (c)(2)(i) of...

Emergency medical operations at Kennedy Space Center in support of space shuttle

NASA Technical Reports Server (NTRS)

Myers, K. J.; Tipton, D. A.; Woodard, D.; Long, I. D.

1992-01-01

The unique environment of the Kennedy Space Center includes a wide variety of industrial processes culminating in launch and spaceflight. Many are potentially hazardous to the work force and the astronauts. Technology, planning, training, and quality control are utilized to prevent contingencies and expedite response should a contingency occur.

Health hazard evaluation report HETA 82-387-1392, Exxon Corporation, Baton Rouge, Louisiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ratcliffe, J.M.; Rosenberg, M.J.; Fox, S.H.

1983-12-01

In response to a request from an authorized representative of employees at the Exxon Corporation, Baton Rouge, Louisiana, an investigation was begun into a possible reproductive health hazard at the refinery waste water treatment facility. The refinery processed crude petroleum into a variety of products, processing about 500,000 barrels of crude oil each day. The men had noted what seemed to be an excessive number of spontaneous abortions occurring among their wives. A cross sectional evaluation of sperm concentration and sperm morphology was conducted in wastewater treatment facility workers and two control groups (those who worked in other portions ofmore » the refinery and administrative personnel who did not work in the refinery itself). Of the 68 men employed in the wastewater treatment facility during the 6 month period before this study, six were not eligible for the study. Semen samples were provided by 42 of the 62 eligible men, and by 73 control subjects. After data adjustment for abstinence period, the mean sperm concentration of the unexposed group did not differ significantly from that of the 42 exposed men.« less

Engineered nanomaterials: exposures, hazards, and risk prevention

PubMed Central

2011-01-01

Nanotechnology presents the possibility of revolutionizing many aspects of our lives. People in many settings (academic, small and large industrial, and the general public in industrialized nations) are either developing or using engineered nanomaterials (ENMs) or ENM-containing products. However, our understanding of the occupational, health and safety aspects of ENMs is still in its formative stage. A survey of the literature indicates the available information is incomplete, many of the early findings have not been independently verified, and some may have been over-interpreted. This review describes ENMs briefly, their application, the ENM workforce, the major routes of human exposure, some examples of uptake and adverse effects, what little has been reported on occupational exposure assessment, and approaches to minimize exposure and health hazards. These latter approaches include engineering controls such as fume hoods and personal protective equipment. Results showing the effectiveness - or lack thereof - of some of these controls are also included. This review is presented in the context of the Risk Assessment/Risk Management framework, as a paradigm to systematically work through issues regarding human health hazards of ENMs. Examples are discussed of current knowledge of nanoscale materials for each component of the Risk Assessment/Risk Management framework. Given the notable lack of information, current recommendations to minimize exposure and hazards are largely based on common sense, knowledge by analogy to ultrafine material toxicity, and general health and safety recommendations. This review may serve as an overview for health and safety personnel, management, and ENM workers to establish and maintain a safe work environment. Small start-up companies and research institutions with limited personnel or expertise in nanotechnology health and safety issues may find this review particularly useful. PMID:21418643

Volcanic Hazard Maps; the results and progress made by the IAVCEI Hazard Map working group

NASA Astrophysics Data System (ADS)

Calder, Eliza; Lindsay, Jan; Wright, Heather

2017-04-01

The IAVCEI Commission on Volcanic Hazards and Risk set up a working group on Hazard Maps in 2014. Since then, the group has led or co-organised three major workshops, and organized two thematic conference sessions. In particular we have initiated a series of workshops, named the "State of the Hazard Map" which we plan to continue (the first was held at COV8 (State of the Hazard Map 1) and second at COV9 (State of the Hazard Map 2) and the third will be held at IAVCEI General Assembly in Portland. The broad aim of these activities is to work towards an IAVCEI-endorsed considerations or guidelines document for volcanic hazard map generation. The workshops have brought together people from around the world working on volcanic hazard maps, and have had four primary objectives: 1) to review (and collect further data on) the diverse variety of methods and rationales currently used to develop maps; 2) to openly discuss approaches and experiences regarding how hazard maps are interpreted and used by different groups; 3) to discuss and prepare the IAVCEI Guidelines document; and lastly, 4) Discuss options for finalizing, publishing and disseminating the Guidelines document (e.g. wiki, report, open-source publication). This presentation will provide an update of the results and outcomes of those initiatives. This includes brief outcomes of the reviews undertaken, a survey that has been constructed in order to gather additional data, the planned structure for the guidelines documents and a summary of the key findings to date. The majority of the participants of these activities so far have come from volcano observatories or geological surveys, as these institutions commonly have primary responsibility for making operational hazard map. It is important however that others in the scientific community that work on quantification of volcanic hazard contribute to these guidelines. We therefore invite interested parties to become involved.

The Nature of Natural Hazards Communication (Invited)

NASA Astrophysics Data System (ADS)

Kontar, Y. Y.

2013-12-01

Some of the many issues of interest to natural hazards professionals include the analysis of proactive approaches to the governance of risk from natural hazards and approaches to broaden the scope of public policies related to the management of risks from natural hazards, as well as including emergency and environmental management, community development and spatial planning related to natural hazards. During the talk we will present results of scientific review, analysis and synthesis, which emphasize same new trends in communication of the natural hazards theories and practices within an up-to-the-minute context of new environmental and climate change issues, new technologies, and a new focus on resiliency. The presentation is divided into five sections that focus on natural hazards communication in terms of education, risk management, public discourse, engaging the public, theoretical perspectives, and new media. It includes results of case studies and best practices. It delves into natural hazards communication theories, including diffusion, argumentation, and constructivism, to name a few. The presentation will provide information about: (1) A manual of natural hazards communication for scientists, policymakers, and media; (2) An up-to-the-minute context of environmental hazards, new technologies & political landscape; (3) A work by natural hazards scientists for geoscientists working with social scientists and communication principles; (4) A work underpinned by key natural hazards communication theories and interspersed with pragmatic solutions; (5) A work that crosses traditional natural hazards boundaries: international, interdisciplinary, theoretical/applied. We will further explore how spatial planning can contribute to risk governance by influencing the occupation of natural hazard-prone areas, and review the central role of emergency management in risk policy. The goal of this presentation is to contribute to the augmentation of the conceptual framework of risk governance and increase the awareness of practitioners and decision-makers to the need to adopt proactive policies, leading to a more integrated, participative, and adaptive governance that can respond more efficiently to the increasing uncertainty resulting from escalating natural hazards risk exposure.

Control strategies for planetary rover motion and manipulator control

NASA Technical Reports Server (NTRS)

Trautwein, W.

1973-01-01

An unusual insect-like vehicle designed for planetary surface exploration is made the occasion for a discussion of control concepts in path selection, hazard detection, obstacle negotiation, and soil sampling. A control scheme which actively articulates the pitching motion between a single-loop front module and a dual loop rear module leads to near optimal behavior in soft soil; at the same time the vehicle's front module acts as a reliable tactile forward probe with a detection range much longer than the stopping distance. Some optimal control strategies are discussed, and the photos of a working scale model are displayed.

Quality and safety aspects in histopathology laboratory

PubMed Central

Adyanthaya, Soniya; Jose, Maji

2013-01-01

Histopathology is an art of analyzing and interpreting the shapes, sizes and architectural patterns of cells and tissues within a given specific clinical background and a science by which the image is placed in the context of knowledge of pathobiology, to arrive at an accurate diagnosis. To function effectively and safely, all the procedures and activities of histopathology laboratory should be evaluated and monitored accurately. In histopathology laboratory, the concept of quality control is applicable to pre-analytical, analytical and post-analytical activities. Ensuring safety of working personnel as well as environment is also highly important. Safety issues that may come up in a histopathology lab are primarily those related to potentially hazardous chemicals, biohazardous materials, accidents linked to the equipment and instrumentation employed and general risks from electrical and fire hazards. This article discusses quality management system which can ensure quality performance in histopathology laboratory. The hazards in pathology laboratories and practical safety measures aimed at controlling the dangers are also discussed with the objective of promoting safety consciousness and the practice of laboratory safety. PMID:24574660

Direction based Hazard Routing Protocol (DHRP) for disseminating road hazard information using road side infrastructures in VANETs.

PubMed

Berlin, M A; Anand, Sheila

2014-01-01

This paper presents Direction based Hazard Routing Protocol (DHRP) for disseminating information about fixed road hazards such as road blocks, tree fall, boulders on road, snow pile up, landslide, road maintenance work and other obstacles to the vehicles approaching the hazardous location. The proposed work focuses on dissemination of hazard messages on highways with sparse traffic. The vehicle coming across the hazard would report the presence of the hazard. It is proposed to use Road Side fixed infrastructure Units for reliable and timely delivery of hazard messages to vehicles. The vehicles can then take appropriate safety action to avoid the hazardous location. The proposed protocol has been implemented and tested using SUMO simulator to generate road traffic and NS 2.33 network simulator to analyze the performance of DHRP. The performance of the proposed protocol was also compared with simple flooding protocol and the results are presented.

Material Selection for Cable Gland to Improved Reliability of the High-hazard Industries

NASA Astrophysics Data System (ADS)

Vashchuk, S. P.; Slobodyan, S. M.; Deeva, V. S.; Vashchuk, D. S.

2018-01-01

The sealed cable glands (SCG) are available to ensure safest connection sheathed single wire for the hazard production facility (nuclear power plant and others) the same as pilot cable, control cables, radio-frequency cables et al. In this paper, we investigate the specifics of the material selection of SCG with the express aim of hazardous man-made facility. We discuss the safe working conditions for cable glands. The research indicates the sintering powdered metals cables provide the reliability growth due to their properties. A number of studies have demonstrated the verification of material selection. On the face of it, we make findings indicating that double glazed sealed units could enhance reliability. We had evaluated sample reliability under fire conditions, seismic load, and pressure containment failure. We used the samples mineral insulated thermocouple cable.

Methods of evaluating protective clothing relative to heat and cold stress: thermal manikin, biomedical modeling, and human testing.

PubMed

O'Brien, Catherine; Blanchard, Laurie A; Cadarette, Bruce S; Endrusick, Thomas L; Xu, Xiaojiang; Berglund, Larry G; Sawka, Michael N; Hoyt, Reed W

2011-10-01

Personal protective equipment (PPE) refers to clothing and equipment designed to protect individuals from chemical, biological, radiological, nuclear, and explosive hazards. The materials used to provide this protection may exacerbate thermal strain by limiting heat and water vapor transfer. Any new PPE must therefore be evaluated to ensure that it poses no greater thermal strain than the current standard for the same level of hazard protection. This review describes how such evaluations are typically conducted. Comprehensive evaluation of PPE begins with a biophysical assessment of materials using a guarded hot plate to determine the thermal characteristics (thermal resistance and water vapor permeability). These characteristics are then evaluated on a thermal manikin wearing the PPE, since thermal properties may change once the materials have been constructed into a garment. These data may be used in biomedical models to predict thermal strain under a variety of environmental and work conditions. When the biophysical data indicate that the evaporative resistance (ratio of permeability to insulation) is significantly better than the current standard, the PPE is evaluated through human testing in controlled laboratory conditions appropriate for the conditions under which the PPE would be used if fielded. Data from each phase of PPE evaluation are used in predictive models to determine user guidelines, such as maximal work time, work/rest cycles, and fluid intake requirements. By considering thermal stress early in the development process, health hazards related to temperature extremes can be mitigated while maintaining or improving the effectiveness of the PPE for protection from external hazards.

Surveillance of working conditions and the work environment: development of a national hazard surveillance tool in New Zealand.

PubMed

Lilley, Rebbecca; Feyer, Anne-Marie; Firth, Hilda; Cunningham, Chris; Paul, Charlotte

2010-02-01

Changes to work and the impact of these changes on worker health and safety have been significant. A core surveillance data set is needed to understand the impact of working conditions and work environments. Yet, there is little harmony amongst international surveys and a critical lack of guidance identifying the best directions for surveillance efforts. This paper describes the establishment of an instrument suitable for use as a hazard surveillance tool for New Zealand workers. An iterative process of critical review was undertaken to create a dimensional framework and select specific measures from existing instruments. Pilot testing to ascertain participant acceptability of the questions was undertaken. The final questionnaire includes measures of socio-demographic characteristics, occupational history, work organisation, physicochemical, ergonomic and psychosocial hazards. Outcome measures were also included. A robust New Zealand hazard surveillance questionnaire comprehensively covering the key measures of work organisation and work environments that impact upon worker health and safety outcomes was developed. Recommended measures of work organisation, work environment and health outcomes that should be captured in work environment surveillance are made.

Work hazards for an aging nursing workforce.

PubMed

Phillips, Jennan A; Miltner, Rebecca

2015-09-01

To discuss selected work hazards and safety concerns for aging nurses. Greater numbers of older nurses remain in the workforce. Projections suggest that one-third of the nursing workforce will be over age 50 years by 2015. Employers will struggle to find ways to protect the health and safety of their aging workforce and prevent a massive loss of intellectual and human resources when these experienced nurses exit the workforce. Review of recent relevant literature in English language journals. Repetitive motion injuries, fatigue and slips, trips and falls are three major work hazards older nurses face. We discuss several factors for each hazard, including: the normal physiological aging effects of diminished strength, hearing and vision; workplace variables of work schedules, noise and clutter; and personal characteristics of sleep disturbances, overexertion and fatigue. Inconclusive evidence exists to guide best practices for designing safe workplace environments and shift patterns for nursing work. There are at least two areas administrators can reduce work hazards for older workers: (1) modification of the workplace, and (2) creating the infrastructure to support the aging workforce to encourage healthy behaviours. © 2014 John Wiley & Sons Ltd.

Canister Storage Building (CSB) Hazard Analysis Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

POWERS, T.B.

2000-03-16

This report describes the methodology used in conducting the Canister Storage Building (CSB) Hazard Analysis to support the final CSB Safety Analysis Report and documents the results. This report describes the methodology used in conducting the Canister Storage Building (CSB) hazard analysis to support the CSB final safety analysis report (FSAR) and documents the results. The hazard analysis process identified hazardous conditions and material-at-risk, determined causes for potential accidents, identified preventive and mitigative features, and qualitatively estimated the frequencies and consequences of specific occurrences. The hazard analysis was performed by a team of cognizant CSB operations and design personnel, safetymore » analysts familiar with the CSB, and technical experts in specialty areas. The material included in this report documents the final state of a nearly two-year long process. Attachment A provides two lists of hazard analysis team members and describes the background and experience of each. The first list is a complete list of the hazard analysis team members that have been involved over the two-year long process. The second list is a subset of the first list and consists of those hazard analysis team members that reviewed and agreed to the final hazard analysis documentation. The material included in this report documents the final state of a nearly two-year long process involving formal facilitated group sessions and independent hazard and accident analysis work. The hazard analysis process led to the selection of candidate accidents for further quantitative analysis. New information relative to the hazards, discovered during the accident analysis, was incorporated into the hazard analysis data in order to compile a complete profile of facility hazards. Through this process, the results of the hazard and accident analyses led directly to the identification of safety structures, systems, and components, technical safety requirements, and other controls required to protect the public, workers, and environment.« less

Multi-actuators vehicle collision avoidance system - Experimental validation

NASA Astrophysics Data System (ADS)

Hamid, Umar Zakir Abdul; Zakuan, Fakhrul Razi Ahmad; Akmal Zulkepli, Khairul; Zulfaqar Azmi, Muhammad; Zamzuri, Hairi; Rahman, Mohd Azizi Abdul; Aizzat Zakaria, Muhammad

2018-04-01

The Insurance Institute for Highway Safety (IIHS) of the United States of America in their reports has mentioned that a significant amount of the road mishaps would be preventable if more automated active safety applications are adopted into the vehicle. This includes the incorporation of collision avoidance system. The autonomous intervention by the active steering and braking systems in the hazardous scenario can aid the driver in mitigating the collisions. In this work, a real-time platform of a multi-actuators vehicle collision avoidance system is developed. It is a continuous research scheme to develop a fully autonomous vehicle in Malaysia. The vehicle is a modular platform which can be utilized for different research purposes and is denominated as Intelligent Drive Project (iDrive). The vehicle collision avoidance proposed design is validated in a controlled environment, where the coupled longitudinal and lateral motion control system is expected to provide desired braking and steering actuation in the occurrence of a frontal static obstacle. Results indicate the ability of the platform to yield multi-actuators collision avoidance navigation in the hazardous scenario, thus avoiding the obstacle. The findings of this work are beneficial for the development of a more complex and nonlinear real-time collision avoidance work in the future.

The demands and benefits of ergonomics in Sri Lankan apparel industry: A case study at MAS holdings.

PubMed

Abeysekera, John; Illankoon, Prasanna

2016-10-17

Apparel exports bring in sizeable foreign income to Sri Lanka. To protect and promote this industry is a paramount need. This can be carried out by applying Human Factors/Ergonomics (HFE) which has proved to control negative effects at work places. This paper reports a case study which describes the demands and benefits of HFE in MAS Holdings which owns a large share of the apparel industry in Sri Lanka. The study consisted of walk through observation survey, a questionnaire survey and ergonomic work place analysis followed by a training programme to selected employees in three companies. Positive responses to questionnaires revealed good ergonomic practices in the work places surveyed. Ergonomically unfit chairs and potential hazards e.g. exposure to noise and hot environment were detected. It is seen that MAS have introduced strategies originated by Toyota Production System viz. 5S, Kaizen, six sigma etc., which are in fact ergonomic methods. A progressive project MAS boast of viz. 'MAS Operating System' (MOS) empowers training and development to employees. MAS Holdings has adequately realized the benefits of applying HFE as evident by the number of awards received. Relevant companies were advised to take appropriate corrective measures to control the potential hazards.

Does Workplace Social Capital Associate with Hazardous Drinking Among Chinese Rural-Urban Migrant Workers?

PubMed Central

Gao, Junling; Weaver, Scott R.; Fua, Hua; Pan, Zhigang

2014-01-01

Background The present study sought to investigate the associations between workplace social capital and hazardous drinking (HD) among Chinese rural-urban migrant workers (RUMW). Methods A cross sectional study with a multi-stage stratified sampling procedure was conducted in Shanghai during July 2012 to January 2013. In total, 5,318 RUMWs from 77 workplaces were involved. Work-place social capital was assessed using a validated and psychometrically tested eight-item measure. The Chinese version of Alcohol Use Disorders Identification Test (AUDIT) was used to assess hazardous drinking. Control variables included gender, age, marital status, education level, salary, and current smoking. Multilevel logistic regression analysis was conducted to test whether individual- and workplace-level social capital was associated with hazardous drinking. Results Overall, the prevalence of HD was 10.6%. After controlling for individual-level socio-demographic and lifestyle variables, compared to workers in the highest quartile of individual-level social capital, the odds of HD for workers in the three bottom quartiles were 1.13(95%CI: 1.04–1.23), 1.17(95%CI: 1.05–1.56) and 1.26(95%CI: 1.13–1.72), respectively. However, contrary to hypothesis, there was no relationship between workplace-level social capital and hazardous drinking. Conclusions Higher individual-level social capital may protect against HD among Chinese RUMWs. Interventions to build individual social capital among RUMWs in China may help reduce HD among this population. PMID:25502013

Values of Flood Hazard Mapping for Disaster Risk Assessment and Communication

NASA Astrophysics Data System (ADS)

Sayama, T.; Takara, K. T.

2015-12-01

Flood plains provide tremendous benefits for human settlements. Since olden days people have lived with floods and attempted to control them if necessary. Modern engineering works such as building embankment have enabled people to live even in flood prone areas, and over time population and economic assets have concentrated in these areas. In developing countries also, rapid land use change alters exposure and vulnerability to floods and consequently increases disaster risk. Flood hazard mapping is an essential step for any counter measures. It has various objectives including raising awareness of residents, finding effective evacuation routes and estimating potential damages through flood risk mapping. Depending on the objectives and data availability, there are also many possible approaches for hazard mapping including simulation basis, community basis and remote sensing basis. In addition to traditional paper-based hazard maps, Information and Communication Technology (ICT) promotes more interactive hazard mapping such as movable hazard map to demonstrate scenario simulations for risk communications and real-time hazard mapping for effective disaster responses and safe evacuations. This presentation first summarizes recent advancement of flood hazard mapping by focusing on Japanese experiences and other examples from Asian countries. Then it introduces a flood simulation tool suitable for hazard mapping at the river basin scale even in data limited regions. In the past few years, the tool has been practiced by local officers responsible for disaster management in Asian countries. Through the training activities of hazard mapping and risk assessment, we conduct comparative analysis to identify similarity and uniqueness of estimated economic damages depending on topographic and land use conditions.

Occupational health hazards in a prosthodontic practice: review of risk factors and management strategies

PubMed Central

Arunachalam, Kuthalingam Subbiah; Solomon, EGR

2012-01-01

The intent of this article was to analyze the potential hazards and risks involved in persons exposed to prosthodontic practice. These risks include exposure to physical and chemical hazards, dental materials, infectious environment, inappropriate working pattern and psychosocial stress. The potential harm of these hazards and its prevention is highlighted. Prosthodontists, students, dental technicians, and others working in the prosthodontic clinics and laboratory should be aware of the specific risk factors and take measures to prevent and overcome these hazards. PMID:23236581

Robots, systems, and methods for hazard evaluation and visualization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nielsen, Curtis W.; Bruemmer, David J.; Walton, Miles C.

A robot includes a hazard sensor, a locomotor, and a system controller. The robot senses a hazard intensity at a location of the robot, moves to a new location in response to the hazard intensity, and autonomously repeats the sensing and moving to determine multiple hazard levels at multiple locations. The robot may also include a communicator to communicate the multiple hazard levels to a remote controller. The remote controller includes a communicator for sending user commands to the robot and receiving the hazard levels from the robot. A graphical user interface displays an environment map of the environment proximatemore » the robot and a scale for indicating a hazard intensity. A hazard indicator corresponds to a robot position in the environment map and graphically indicates the hazard intensity at the robot position relative to the scale.« less

Environmental Hazards Assessment Program annual report, [June 1992--June 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-10-01

This report, the Environment Hazards Assessment Program (EHAP) Annual Report, is the second of three reports that document activities under the EHAP grant and details progress made during the first year of the grant. The first year was devoted to the development of a working program implementation plan. During the developmental process some key objectives were achieved such as developing a Doctor of Philosophy degree program in Environmental Studies at MUSC (Medical University of South Carolina) and conducting the first Crossroads of Humanity series Round Table Forum. The PIP (Program Implementation Program) details the objectives, management and budgetary basis formore » the overall management and control of the grant over the next four years, the yearly program plans provide the monthly and day-to-day programmatic and budgetary control by which the PIP was developed.« less

Inventing the Right to Know

PubMed Central

2016-01-01

In the 1980s, the right-to-know movement won American workers unprecedented access to information about the health hazards they faced on the job. The precursors and origins of these initiatives to extend workplace democracy remain quite obscure. This study brings to light the efforts of one of the early proponents of wider dissemination of information related to hazard recognition and control. Through his work as a state public health official and as an advisor to organized labor in the 1950s, Herbert Abrams was a pioneer in advocating not only broader sharing of knowledge but also more expansive rights of workers and their organizations to act on that knowledge. PMID:26691112

"Will my work affect my pregnancy?" Resources for anticipating and answering patients' questions.

PubMed

Grajewski, Barbara; Rocheleau, Carissa M; Lawson, Christina C; Johnson, Candice Y

2016-05-01

Authoritative information on occupational reproductive hazards is scarce and complex because exposure levels vary, multiple exposures may be present, and the reproductive toxicity of many agents remains unknown. For these reasons, women's health providers may find it challenging to effectively address workplace reproductive health issues with their patients who are pregnant, breast-feeding, or considering pregnancy. Reproductive epidemiologists at the Centers for Disease Control and Prevention National Institute for Occupational Safety and Health answered >200 public requests for occupational reproductive health information during 2009 through 2013. The most frequent occupations represented were health care (41%) and laboratory work (18%). The most common requests for exposure information concerned solvents (14%), anesthetic gases (10%), formaldehyde (7%), infectious agents in laboratories (7%) or health care settings (7%), and physical agents (14%), including ionizing radiation (6%). Information for developing workplace policies or guidelines was sought by 12% of the requestors. Occupational exposure effects on breast-feeding were an increasing concern among working women. Based on information developed in response to these requestors, information is provided for discussing workplace exposures with patients, assessing potential workplace reproductive hazards, and helping patients determine the best options for safe work in pregnancy. Appendices provide resources to address specific occupational exposures, employee groups, personal protective equipment, breast-feeding, and workplace regulations regarding work and pregnancy. These tools can help identify those most at risk of occupational reproductive hazards and improve workers' reproductive health. The information can also be used to inform research priorities and assist the development of workplace reproductive health policies. Published by Elsevier Inc.

Job strain and the risk of inflammatory bowel diseases: individual-participant meta-analysis of 95,000 men and women.

PubMed

Heikkilä, Katriina; Madsen, Ida E H; Nyberg, Solja T; Fransson, Eleonor I; Ahola, Kirsi; Alfredsson, Lars; Bjorner, Jakob B; Borritz, Marianne; Burr, Hermann; Dragano, Nico; Ferrie, Jane E; Knutsson, Anders; Koskenvuo, Markku; Koskinen, Aki; Nielsen, Martin L; Nordin, Maria; Pejtersen, Jan H; Pentti, Jaana; Rugulies, Reiner; Oksanen, Tuula; Shipley, Martin J; Suominen, Sakari B; Theorell, Töres; Väänänen, Ari; Vahtera, Jussi; Virtanen, Marianna; Westerlund, Hugo; Westerholm, Peter J M; Batty, G David; Singh-Manoux, Archana; Kivimäki, Mika

2014-01-01

Many clinicians, patients and patient advocacy groups believe stress to have a causal role in inflammatory bowel diseases, such as Crohn's disease and ulcerative colitis. However, this is not corroborated by clear epidemiological research evidence. We investigated the association between work-related stress and incident Crohn's disease and ulcerative colitis using individual-level data from 95,000 European adults. We conducted individual-participant data meta-analyses in a set of pooled data from 11 prospective European studies. All studies are a part of the IPD-Work Consortium. Work-related psychosocial stress was operationalised as job strain (a combination of high demands and low control at work) and was self-reported at baseline. Crohn's disease and ulcerative colitis were ascertained from national hospitalisation and drug reimbursement registers. The associations between job strain and inflammatory bowel disease outcomes were modelled using Cox proportional hazards regression. The study-specific results were combined in random effects meta-analyses. Of the 95,379 participants who were free of inflammatory bowel disease at baseline, 111 men and women developed Crohn's disease and 414 developed ulcerative colitis during follow-up. Job strain at baseline was not associated with incident Crohn's disease (multivariable-adjusted random effects hazard ratio: 0.83, 95% confidence interval: 0.48, 1.43) or ulcerative colitis (hazard ratio: 1.06, 95% CI: 0.76, 1.48). There was negligible heterogeneity among the study-specific associations. Our findings suggest that job strain, an indicator of work-related stress, is not a major risk factor for Crohn's disease or ulcerative colitis.

The perceived compatibility of safety and production expectations in hazardous occupations.

PubMed

McLain, David L; Jarrell, Kimberly A

2007-01-01

Safety hazards are unavoidable in many work environments. Employees must be both productive and safe, however, conflicting safety and production demands can negatively affect safety, production, or both. The employee's perception of the compatibility of management's safety and production expectations is a possible predictor of such consequences. This paper defines "safety-production compatibility" and describes how measures of safety-production compatibility, as well as safety pressure and production pressure, were developed. We used LISREL structural equation modeling to test the influences of safety-production compatibility, safety pressure, and production pressure on safe work behavior and interference with performing other work tasks. The 239 study participants were workers employed in diverse but hazardous occupations. Pressure to work safely was positively associated with safe work behavior. The perceived compatibility of safety and production demands positively influenced safe work behavior and reduced the interference of safety hazards performing other tasks. Safety-production compatibility was also found to mediate the relationship between trust in management and safe work behavior. The results of this field study suggest increased compatibility, and thus less conflict, between safety and production demands influences safe work behavior and the interference of safety hazards with performing other work tasks. More broadly, the worker's reaction to multiple work demands is a safety and performance influence. Safety management efforts that focus only on the hazards fail to eliminate many accidents because accidents arise from many factors including technology, safety climate, social influences, production, and safety demands. This study suggests that workers differ in their perception of the compatibility of safety and production demands. These differences will show up in safe work behavior, influencing the effectiveness of safety management efforts and the trust workers have in management's concern for safety.

Engineering and public health at CDC.

PubMed

Earnest, G Scott; Reed, Laurence D; Conover, D; Estill, C; Gjessing, C; Gressel, M; Hall, R; Hudock, S; Hudson, H; Kardous, C; Sheehy, J; Topmiller, J; Trout, D; Woebkenberg, M; Amendola, A; Hsiao, H; Keane, P; Weissman, D; Finfinger, G; Tadolini, S; Thimons, E; Cullen, E; Jenkins, M; McKibbin, R; Conway, G; Husberg, B; Lincoln, J; Rodenbeck, S; Lantagne, D; Cardarelli, J

2006-12-22

Engineering is the application of scientific and technical knowledge to solve human problems. Using imagination, judgment, and reasoning to apply science, technology, mathematics, and practical experience, engineers develop the design, production, and operation of useful objects or processes. During the 1940s, engineers dominated the ranks of CDC scientists. In fact, the first CDC director, Assistant Surgeon General Mark Hollis, was an engineer. CDC engineers were involved in malaria control through the elimination of standing water. Eventually the CDC mission expanded to include prevention and control of dengue, typhus, and other communicable diseases. The development of chlorination, water filtration, and sewage treatment were crucial to preventing waterborne illness. Beginning in the 1950s, CDC engineers began their work to improve public health while developing the fields of environmental health, industrial hygiene, and control of air pollution. Engineering disciplines represented at CDC today include biomedical, civil, chemical, electrical, industrial, mechanical, mining, and safety engineering. Most CDC engineers are located in the National Institute for Occupational Safety and Health (NIOSH) and the Agency for Toxic Substances and Disease Registry (ATSDR). Engineering research at CDC has a broad stakeholder base. With the cooperation of industry, labor, trade associations, and other stakeholders and partners, current work includes studies of air contaminants, mining, safety, physical agents, ergonomics, and environmental hazards. Engineering solutions remain a cornerstone of the traditional "hierarchy of controls" approach to reducing public health hazards.

76 FR 45592 - Delegation of Authority for the Office of Healthy Homes and Lead Hazard Control

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-29

... the Office of Healthy Homes and Lead Hazard Control AGENCY: Office of the Secretary, HUD. ACTION... of 1992, the Office of Healthy Homes and Lead Hazard Control (OHHLHC) is authorized to develop, demonstrate, and promote measures to correct lead-based paint-related health and safety hazards in the home...

Critical Drivers for Safety Culture: Examining Department of Energy and U.S. Army Operational Experiences - 12382

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lowes, Elizabeth A.

2012-07-01

Evaluating operational incidents can provide a window into the drivers most critical to establishing and maintaining a strong safety culture, thereby minimizing the potential project risk associated with safety incidents. By examining U.S. Department of Energy (DOE) versus U.S. Army drivers in terms of regulatory and contract requirements, programs implemented to address the requirements, and example case studies of operational events, a view of the elements most critical to making a positive influence on safety culture is presented. Four case studies are used in this evaluation; two from DOE and two from U.S. Army experiences. Although the standards guiding operationsmore » at these facilities are different, there are many similarities in the level of hazards, as well as the causes and the potential consequences of the events presented. Two of the incidents examined, one from a DOE operation and the other from a U.S. Army facility, resulted in workers receiving chemical burns. The remaining two incidents are similar in that significant conduct of operations failures occurred resulting in high-level radioactive waste (in the case of the DOE facility) or chemical agent (in the case of the Army facility) being transferred outside of engineering controls. A review of the investigation reports for all four events indicates the primary causes to be failures in work planning leading to ineffective hazard evaluation and control, lack of procedure adherence, and most importantly, lack of management oversight to effectively reinforce expectations for safe work planning and execution. DOE and Army safety programs are similar, and although there are some differences in contractual requirements, the expectations for safe performance are essentially the same. This analysis concludes that instilling a positive safety culture comes down to management leadership and engagement to (1) cultivate an environment that values a questioning attitude and (2) continually reinforce expectations for the appropriate level of rigor in work planning and procedure adherence. A review of the root causes and key contributing causes to the events indicate: - Three of the four root cause analyses cite lack of management engagement (oversight, involvement, ability to recognize issues, etc.) as a root cause to the events. - Two of the four root cause analyses cite work planning failures as a root cause to the events and all cause analyses reflect work planning failures as contributing factors to the events. - All events with the exception of the Tuba City plant shutdown indicate procedure noncompliance as a key contributor; in the case of Tuba City the procedure issues were primarily related to a lack of procedures, or a lack of sufficiently detailed procedures. - All events included discussion or suggestion of a lack of a questioning attitude, either on the part of management/supervision, work planners, or workers. This analysis suggests that the most critical drivers to safety culture are: - Management engagement, - Effective work planning and procedures, and - Procedure adherence with a questioning attitude to ensure procedural problems are identified and fixed. In high-hazard operational environments the importance of robust work planning processes and procedure adherence cannot be overstated. However, having the processes by themselves is not enough. Management must actively engage in expectation setting and ensure work planning that meets expectations for hazard analysis and control, develop a culture that encourages incident reporting and a questioning attitude, and routinely observe work performance to reinforce expectations for adherence to procedures/work control documents. In conclusion, the most critical driver to achieving a workforce culture that supports safe and effective project performance can be summarized as follows: 'Management engagement to continually reinforce expectations for work planning processes and procedure adherence in an environment that cultivates a questioning attitude'. (authors)« less

On the Road to Safety and Health. A Manual for Road Crews.

ERIC Educational Resources Information Center

Chapnick, Ellen P.

This occupational safety and health handbook is designed for use as an educational tool in safety and health training classes for road workers. The first of six major sections, Caution Work Ahead, identifies principles of controlling hazards and discusses how the law can help improve safety and health conditions. Section 2 describes three common…

30 CFR 57.4660 - Work in shafts, raises, or winzes and other activities involving hazard areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

... ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Welding/cutting/compressed Gases § 57.4660... noncombustible material. (3) Shield the activity so that hot metal and sparks cannot cause a fire. (4) Provide a...

Negotiating the Context of Online In-Service Training: "Expert" and "Non-Expert" Footings

ERIC Educational Resources Information Center

Nilsen, Mona

2010-01-01

This paper focuses on how people working in the Swedish food production industry engage in in-service training by means of computer-mediated communication. The empirical material consists of archived chat log files from a course concerning quality assurance and food safety hazards control in the preparation and handling of foodstuff. Drawing on…

Perception and prevalence of work-related health hazards among health care workers in public health facilities in southern India.

PubMed

Senthil, Arasi; Anandh, Balasubramanian; Jayachandran, Palsamy; Thangavel, Gurusamy; Josephin, Diana; Yamini, Ravindran; Kalpana, Balakrishnan

2015-01-01

Health care workers (HCWs) are exposed to occupational related health hazards. Measuring worker perception and the prevalence of these hazards can help facilitate better risk management for HCWs, as these workers are envisaged to be the first point of contact, especially in resource poor settings. To describe the perception of occupational health hazards and self-reported exposure prevalence among HCWs in Southern India. We used cross sectional design with stratified random sampling of HCWs from different levels of health facilities and categories in a randomly selected district in Southern India. Data on perception and exposure prevalence were collected using a structured interview schedule developed by occupational health experts and administered by trained investigators. A total of 482 HCWs participated. Thirty nine percent did not recognize work-related health hazards, but reported exposure to at least one hazard upon further probing. Among the 81·5% who reported exposure to biological hazard, 93·9% had direct skin contact with infectious materials. Among HCWs reporting needle stick injury, 70·5% had at least one in the previous three months. Ergonomic hazards included lifting heavy objects (42%) and standing for long hours (37%). Psychological hazards included negative feelings (20·3%) and verbal or physical abuse during work (20·5%). More than a third of HCWs failed to recognize work-related health hazards. Despite training in handling infectious materials, HCWs reported direct skin contact with infectious materials and needle stick injuries. RESULTS indicate the need for training oriented toward behavioral change and provision of occupational health services.

Establishing a proactive safety and health risk management system in the fire service.

PubMed

Poplin, Gerald S; Pollack, Keshia M; Griffin, Stephanie; Day-Nash, Virginia; Peate, Wayne F; Nied, Ed; Gulotta, John; Burgess, Jefferey L

2015-04-19

Formalized risk management (RM) is an internationally accepted process for reducing hazards in the workplace, with defined steps including hazard scoping, risk assessment, and implementation of controls, all within an iterative process. While required for all industry in the European Union and widely used elsewhere, the United States maintains a compliance-based regulatory structure, rather than one based on systematic, risk-based methodologies. Firefighting is a hazardous profession, with high injury, illness, and fatality rates compared with other occupations, and implementation of RM programs has the potential to greatly improve firefighter safety and health; however, no descriptions of RM implementation are in the peer-reviewed literature for the North American fire service. In this paper we describe the steps used to design and implement the RM process in a moderately-sized fire department, with particular focus on prioritizing and managing injury hazards during patient transport, fireground, and physical exercise procedures. Hazard scoping and formalized risk assessments are described, in addition to the identification of participatory-led injury control strategies. Process evaluation methods were conducted to primarily assess the feasibility of voluntarily instituting the RM approach within the fire service setting. The RM process was well accepted by the fire department and led to development of 45 hazard specific-interventions. Qualitative data documenting the implementation of the RM process revealed that participants emphasized the: value of the RM process, especially the participatory bottom-up approach; usefulness of the RM process for breaking down tasks to identify potential risks; and potential of RM for reducing firefighter injury. As implemented, this risk-based approach used to identify and manage occupational hazards and risks was successful and is deemed feasible for U.S. (and other) fire services. While several barriers and challenges do exist in the implementation of any intervention such as this, recommendations for adopting the process are provided. Additional work will be performed to determine the effectiveness of select controls strategies that were implemented; however participants throughout the organizational structure perceived the RM process to be of high utility while researchers also found the process improved the awareness and engagement in actively enhancing worker safety and health.

76 FR 56362 - National Oil and Hazardous Substances Pollution Contingency Plan National Priorities List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-13

... and Hazardous Substances Pollution Contingency Plan National Priorities List AGENCY: Environmental... protection, Air pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental relations, Penalties, Reporting and recordkeeping requirements, Superfund, Water pollution control, Water...

76 FR 42055 - National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-18

... protection, Air pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental relations, Penalties, Reporting and recordkeeping requirements, Superfund, Water pollution control, Water... and Hazardous Substances Pollution Contingency Plan; National Priorities List AGENCY: Environmental...

21 CFR 120.8 - Hazard Analysis and Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2010 CFR

2010-04-01

...: (i) Critical control points designed to control food hazards that are reasonably likely to occur and could be introduced inside the processing plant environment; and (ii) Critical control points designed... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Hazard Analysis and Critical Control Point (HACCP...

21 CFR 120.8 - Hazard Analysis and Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2012 CFR

2012-04-01

...: (i) Critical control points designed to control food hazards that are reasonably likely to occur and could be introduced inside the processing plant environment; and (ii) Critical control points designed... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Hazard Analysis and Critical Control Point (HACCP...

21 CFR 120.8 - Hazard Analysis and Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2013 CFR

2013-04-01

...: (i) Critical control points designed to control food hazards that are reasonably likely to occur and could be introduced inside the processing plant environment; and (ii) Critical control points designed... 21 Food and Drugs 2 2013-04-01 2013-04-01 false Hazard Analysis and Critical Control Point (HACCP...

21 CFR 120.8 - Hazard Analysis and Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2014 CFR

2014-04-01

...: (i) Critical control points designed to control food hazards that are reasonably likely to occur and could be introduced inside the processing plant environment; and (ii) Critical control points designed... 21 Food and Drugs 2 2014-04-01 2014-04-01 false Hazard Analysis and Critical Control Point (HACCP...

21 CFR 120.8 - Hazard Analysis and Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2011 CFR

2011-04-01

...: (i) Critical control points designed to control food hazards that are reasonably likely to occur and could be introduced inside the processing plant environment; and (ii) Critical control points designed... 21 Food and Drugs 2 2011-04-01 2011-04-01 false Hazard Analysis and Critical Control Point (HACCP...

Evaluation of the Seismic Hazard in Venezuela with a revised seismic catalog that seeks for harmonization along the country borders

NASA Astrophysics Data System (ADS)

Rendon, H.; Alvarado, L.; Paolini, M.; Olbrich, F.; González, J.; Ascanio, W.

2013-05-01

Probabilistic Seismic Hazard Assessment is a complex endeavor that relies on the quality of the information that comes from different sources: the seismic catalog, active faults parameters, strain rates, etc. Having this in mind, during the last several months, the FUNVISIS seismic hazard group has been working on a review and update of the local data base that form the basis for a reliable PSHA calculation. In particular, the seismic catalog, which provides the necessary information that allows the evaluation of the critical b-value, which controls how seismic occurrence distributes with magnitude, has received particular attention. The seismic catalog is the result of the effort of several generations of researchers along the years; therefore, the catalog necessarily suffers from the lack of consistency, homogeneity and completeness for all ranges of magnitude over any seismic study area. Merging the FUNVISIS instrumental catalog with the ones obtained from international agencies, we present the work that we have been doing to produce a consistent seismic catalog that covers Venezuela entirely, with seismic events starting from 1910 until 2012, and report the magnitude of completeness for the different periods. Also, we present preliminary results on the Seismic Hazard evaluation that takes into account such instrumental catalog, the historical catalog, updated known fault geometries and its correspondent parameters, and the new seismic sources that have been defined accordingly. Within the spirit of the Global Earthquake Model (GEM), all these efforts look for possible bridges with neighboring countries to establish consistent hazard maps across the borders.

[Hazard assessment and occupational safety measures in surgery : Relevant knowledge on occupational medicine].

PubMed

Darius, S; Meyer, F; Böckelmann, I

2016-11-01

Surgeons routinely work in an environment with occupational risks and hazards about which they are often uninformed. Based on the currently available scientific literature this review article describes the various hazards in the operating theater and their effects on personnel, particularly from the surgical perspective. A further aim of this article is to describe the occupational safety measures to reduce the burdens and to maintain the long-term health of personnel. Ultimately, surgeons should be equipped with the necessary knowledge for implementing hazard assessments according to the German Occupational Health and Safety Act. Surgeons are exposed to increased risks and hazards by working in awkward positions with a high risk for musculoskeletal pain and injuries. They are also commonly exposed to inhalational anesthetics, surgical smoke, radiation, noise and infectious agents. Furthermore, the mental and emotional stress associated with these activities is also high. Meaningful occupational safety measures for reduction of burdens are from a technical aspect the installation of effective air extraction systems, measures to reduce exposure to radiation and noise and the use of safer instruments to prevent needle stick injuries. Furthermore, individual occupational safety measures, such as the use of personal protective equipment (e.g. radiation protective clothing and double gloves) must be observed. The consistent implementation and also adherence to these described occupational safety measures and regulations can reduce the burden on operating theater personnel and contribute to maintaining health. Furthermore, periodic preventive healthcare controls and health checks by the company medical officer and individually initiated additional prevention measures can be a sensible augmentation to these safety measures.

24 CFR 35.1330 - Interim controls.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Interim controls. 35.1330 Section... Lead-Paint Hazard Evaluation and Hazard Reduction Activities § 35.1330 Interim controls. Interim controls of lead-based paint hazards identified in a risk assessment shall be conducted in accordance with...

Consolidation process for producing ceramic waste forms

DOEpatents

Hash, Harry C.; Hash, Mark C.

2000-01-01

A process for the consolidation and containment of solid or semisolid hazardous waste, which process comprises closing an end of a circular hollow cylinder, filling the cylinder with the hazardous waste, and then cold working the cylinder to reduce its diameter while simultaneously compacting the waste. The open end of the cylinder can be sealed prior to or after the cold working process. The preferred method of cold working is to draw the sealed cylinder containing the hazardous waste through a plurality of dies to simultaneously reduce the diameter of the tube while compacting the waste. This process provides a quick continuous process for consolidating hazardous waste, including radioactive waste.

76 FR 56294 - National Oil and Hazardous Substances Pollution Contingency Plan National Priorities List

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-13

... and Hazardous Substances Pollution Contingency Plan National Priorities List AGENCY: Environmental... pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental relations, Penalties, Reporting and recordkeeping requirements, Superfund, Water pollution control, Water supply. Authority: 33 U...

Handbook on Bird Management and Control.

DTIC Science & Technology

1980-03-01

strike hazard ...................... 70 FIGURE 10. Sample application of sharp projections ........ 80 FIGURE 11. Plans for a low profile pigeon trap...particularly with Domestic Pigeons , Starlings, and House Sparrows, can reduce most of the hazards mentioned in this chapter. 4.2. HEALTH HAZARDS 4.2.1...damage, pest bird control, hazardous bird control, bird biology t behavior, altering the concept, altering the situation, exclusion, repulsion, removal

Volcanic hazards in Central America

USGS Publications Warehouse

Rose, William I.; Bluth, Gregg J.S.; Carr, Michael J.; Ewert, John W.; Patino, Lina C.; Vallance, James W.

2006-01-01

This volume is a sampling of current scientific work about volcanoes in Central America with specific application to hazards. The papers reflect a variety of international and interdisciplinary collaborations and employ new methods. The book will be of interest to a broad cross section of scientists, especially volcanologists. The volume also will interest students who aspire to work in the field of volcano hazards mitigation or who may want to work in one of Earth’s most volcanically active areas.

One-eyed science: scientists, workplace reproductive hazards, and the right to work.

PubMed

Messing, K

1999-01-01

Although most occupational health research has been done with male subjects and on jobs traditionally done by men, research on reproductive hazards is an exception. Researchers were late to realize that men were exposed to reproductive hazards. However, women's health problems have been excluded from the large scientific literature on reproductive hazards, which has concentrated on hazards to fetuses. This is true even of much feminist-oriented research. This neglect is attributable to a reluctance to emphasize health hazards for women at work, since identifying those specific to women may militate against women's employment. Union action is in fact necessary to protect access to employment and health at the same time.

Two-tier Haddon matrix approach to fault analysis of accidents and cybernetic search for relationship to effect operational control: a case study at a large construction site.

PubMed

Mazumdar, Atmadeep; Sen, Krishna Nirmalya; Lahiri, Balendra Nath

2007-01-01

The Haddon matrix is a potential tool for recognizing hazards in any operating engineering system. This paper presents a case study of operational hazards at a large construction site. The fish bone structure helps to visualize and relate the chain of events, which led to the failure of the system. The two-tier Haddon matrix approach helps to analyze the problem and subsequently prescribes preventive steps. The cybernetic approach has been undertaken to establish the relationship among event variables and to identify the ones with most potential. Those event variables in this case study, based on the cybernetic concepts like control responsiveness and controllability salience, are (a) uncontrolled swing of sheet contributing to energy, (b) slippage of sheet from anchor, (c) restricted longitudinal and transverse swing or rotation about the suspension, (d) guilt or uncertainty of the crane driver, (e) safe working practices and environment.

75 FR 14361 - Notification, Documentation, and Recordkeeping Requirements for Inspected Establishments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-25

... establishment's process control plans, that is, its Hazard Analysis and Critical Control Point plans. DATES... control plans, i.e., its Hazard Analysis and Critical Control Point (HACCP) plans; and (3) make the recall... systematic prevention of biological, chemical, and physical hazards. HACCP plans are establishment-developed...

75 FR 58423 - Notice of Funding Availability for HUD's Fiscal Year (FY) 2010 Lead-Based Paint Hazard Control...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-24

... Availability for HUD's Fiscal Year (FY) 2010 Lead-Based Paint Hazard Control Grant Program and Lead Hazard Reduction Demonstration Grant Program; Technical Correction AGENCY: Office of Healthy Homes and Lead Hazard...://www.Grants.gov its Notice of Funding Availability (NOFA) for HUD's FY2010 Lead-Based Paint Hazard...

NASA Hazard Analysis Process

NASA Technical Reports Server (NTRS)

Deckert, George

2010-01-01

This viewgraph presentation reviews The NASA Hazard Analysis process. The contents include: 1) Significant Incidents and Close Calls in Human Spaceflight; 2) Subsystem Safety Engineering Through the Project Life Cycle; 3) The Risk Informed Design Process; 4) Types of NASA Hazard Analysis; 5) Preliminary Hazard Analysis (PHA); 6) Hazard Analysis Process; 7) Identify Hazardous Conditions; 8) Consider All Interfaces; 9) Work a Preliminary Hazard List; 10) NASA Generic Hazards List; and 11) Final Thoughts

Psychosocial working conditions, occupational groups, and risk of disability pension due to mental diagnoses: a cohort study of 43,000 Swedish twins.

PubMed

Samuelsson, Åsa; Ropponen, Annina; Alexanderson, Kristina; Svedberg, Pia

2013-07-01

The aim of this study was to investigate associations between psychosocial working conditions, occupational groups defined by sector, and disability pension (DP) with mental diagnoses while accounting for familial confounding. A prospective population-based cohort study was conducted, including all Swedish twins who, in January 1993, were living and working in Sweden and not on old-age pension or DP (N=42 715). The twins were followed from 1993-2008 regarding DP. Data on DP, exposures, and covariates were obtained from national registries. Cox proportional hazards regression models with hazard ratios (HR) and 95% confidence intervals (95% CI) were constructed for the whole cohort, and for discordant twin pairs. The associations for the whole cohort between DP with mental diagnoses and (i) job demands (HR 1.23, 95% CI 1.06-1.43), (ii) job control (HR 0.91, 95% CI 0.83-0.99), (iii) healthcare and social work (HR 1.41, 95% CI 1.04-1.92), and (iv) service and military work (HR 2.07, 95% CI 1.37-3.14) remained after accounting for possible confounders, including familial factors, while the associations between DP and (i) social support, (ii) type of jobs, and (iii) some of the occupational groups were attenuated, becoming non-significant. In the discordant twin pair analyses, commercial work was significantly associated with lower risk of DP (HR 0.55, 95% CI 0.32-0.95). One unit increase in job demands and working in the occupational groups healthcare and social work or service and military work seem to be risk factors of DP with mental diagnoses, independent from various background factors including familial ones. However, one unit increase in job control or working in commercial work seem to be protective factors of such DP, accounting for confounding factors of this study.

Hazard banding in compliance with the new Globally Harmonised System (GHS) for use in control banding tools.

PubMed

Arnone, Mario; Koppisch, Dorothea; Smola, Thomas; Gabriel, Stefan; Verbist, Koen; Visser, Remco

2015-10-01

Many control banding tools use hazard banding in risk assessments for the occupational handling of hazardous substances. The outcome of these assessments can be combined with advice for the required risk management measures (RMMs). The Globally Harmonised System of Classification and Labelling of Chemicals (GHS) has resulted in a change in the hazard communication elements, i.e. Hazard (H) statements instead of Risk-phrases. Hazard banding schemes that depend on the old form of safety information have to be adapted to the new rules. The purpose of this publication is to outline the rationales for the assignment of hazard bands to H statements under the GHS. Based on this, this publication proposes a hazard banding scheme that uses the information from the safety data sheets as the basis for assignment. The assignment of hazard bands tiered according to the severity of the underlying hazards supports the important principle of substitution. Additionally, the set of assignment rules permits an exposure-route-specific assignment of hazard bands, which is necessary for the proposed route-specific RMMs. Ideally, all control banding tools should apply the same assignment rules. This GHS-compliant hazard banding scheme can hopefully help to establish a unified hazard banding strategy in the various control banding tools. Copyright © 2015 Elsevier Inc. All rights reserved.

Models of volcanic eruption hazards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wohletz, K.H.

1992-01-01

Volcanic eruptions pose an ever present but poorly constrained hazard to life and property for geothermal installations in volcanic areas. Because eruptions occur sporadically and may limit field access, quantitative and systematic field studies of eruptions are difficult to complete. Circumventing this difficulty, laboratory models and numerical simulations are pivotal in building our understanding of eruptions. For example, the results of fuel-coolant interaction experiments show that magma-water interaction controls many eruption styles. Applying these results, increasing numbers of field studies now document and interpret the role of external water eruptions. Similarly, numerical simulations solve the fundamental physics of high-speed fluidmore » flow and give quantitative predictions that elucidate the complexities of pyroclastic flows and surges. A primary goal of these models is to guide geologists in searching for critical field relationships and making their interpretations. Coupled with field work, modeling is beginning to allow more quantitative and predictive volcanic hazard assessments.« less

Models of volcanic eruption hazards

NASA Astrophysics Data System (ADS)

Wohletz, K. H.

Volcanic eruptions pose an ever present but poorly constrained hazard to life and property for geothermal installations in volcanic areas. Because eruptions occur sporadically and may limit field access, quantitative and systematic field studies of eruptions are difficult to complete. Circumventing this difficulty, laboratory models and numerical simulations are pivotal in building our understanding of eruptions. For example, the results of fuel-coolant interaction experiments show that magma-water interaction controls many eruption styles. Applying these results, increasing numbers of field studies now document and interpret the role of external water eruptions. Similarly, numerical simulations solve the fundamental physics of high-speed fluid flow and give quantitative predictions that elucidate the complexities of pyroclastic flows and surges. A primary goal of these models is to guide geologists in searching for critical field relationships and making their interpretations. Coupled with field work, modeling is beginning to allow more quantitative and predictive volcanic hazard assessments.

Controlling hazardous energy sources (lockout/tagout)

NASA Technical Reports Server (NTRS)

Dominguez, Manuel B.

1991-01-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Controlling hazardous energy sources (lockout/tagout)

NASA Astrophysics Data System (ADS)

Dominguez, Manuel B.

1991-10-01

The minimum requirements as established by the Occupational Safety and Health Administration (OSHA) standard 29 CFR 1910.147 are discussed for preventing the unexpected operation of equipment or release of energy which could cause injury to personnel, damage to equipment, harm to the environment, or loss or compromise of test data. Safety requirements both for government and contractor personnel are explained for potentially hazardous energy sources during work operations at LeRC (Cleveland and Plum Brook Stations). Basic rules are presented to ensure protection against harmful exposures, and baseline implementation requirements are discussed from which detailed lockout/tagout procedures can be developed for individual equipment items. Examples of energy sources covered by this document include electrical, pneumatic, mechanical, chemical, cryogenic, thermal, spring tension/compression suspended or moving loads, and other potentially hazardous sources. Activities covered by this standard include, but are not limited to, construction, maintenance, installation, calibration, inspection, cleaning, or repair.

Experimental Studies on the Flammability and Fire Hazards of Photovoltaic Modules

PubMed Central

Yang, Hong-Yun; Zhou, Xiao-Dong; Yang, Li-Zhong; Zhang, Tao-Lin

2015-01-01

Many of the photovoltaic (PV) systems on buildings are of sufficiently high voltages, with potential to cause or promote fires. However, research about photovoltaic fires is insufficient. This paper focuses on the flammability and fire hazards of photovoltaic modules. Bench-scale experiments based on polycrystalline silicon PV modules have been conducted using a cone calorimeter. Several parameters including ignition time (tig), mass loss, heat release rate (HRR), carbon monoxide (CO) and carbon dioxide (CO2) concentration, were investigated. The fire behaviours, fire hazards and toxicity of gases released by PV modules are assessed based on experimental results. The results show that PV modules under tests are inflammable with the critical heat flux of 26 kW/m2. This work will lead to better understanding on photovoltaic fires and how to help authorities determine the appropriate fire safety provisions for controlling photovoltaic fires. PMID:28793434

Experimental Studies on the Flammability and Fire Hazards of Photovoltaic Modules.

PubMed

Yang, Hong-Yun; Zhou, Xiao-Dong; Yang, Li-Zhong; Zhang, Tao-Lin

2015-07-09

Many of the photovoltaic (PV) systems on buildings are of sufficiently high voltages, with potential to cause or promote fires. However, research about photovoltaic fires is insufficient. This paper focuses on the flammability and fire hazards of photovoltaic modules. Bench-scale experiments based on polycrystalline silicon PV modules have been conducted using a cone calorimeter. Several parameters including ignition time ( t ig ), mass loss, heat release rate (HRR), carbon monoxide (CO) and carbon dioxide (CO₂) concentration, were investigated. The fire behaviours, fire hazards and toxicity of gases released by PV modules are assessed based on experimental results. The results show that PV modules under tests are inflammable with the critical heat flux of 26 kW/m². This work will lead to better understanding on photovoltaic fires and how to help authorities determine the appropriate fire safety provisions for controlling photovoltaic fires.

Occupational and environmental reproductive hazards education and resources for communities of color.

PubMed Central

Dula, A; Kurtz, S; Samper, M L

1993-01-01

Little research has been published on the occupational and environmental hazards affecting people of color. Even less is known about the hazards that affect women of color. Although women of color have always been aggressive participants in the work force, their labor activity has increased dramatically over the last decade. Current job placement patterns suggest that women of color are concentrated in the lowest-paying and most hazardous jobs. In this paper, we specifically focus on occupational and environmental reproductive health concerns. We write with the understanding that reproductive hazards can affect pregnant women, nonpregnant women, and men, as well as the health and development of young children. Emphasis is placed primarily on African American women, because information on Hispanic, Native American, and Asian women is very limited. We discuss the participation of women of color in the labor force, using the U.S. Department of Labor categories. We review specific occupational hazards associated with each category of work and briefly discuss environmental hazards, noting that communities of color are at a disproportionate risk of exposure. Finally, we present the consensus report of the Community Education Working Group from the Woods Hole Conference on Occupational and Environmental Reproductive Hazards. PMID:8243389

Experiences of an Engineer working in Reactor Safety and Emergency Response

NASA Astrophysics Data System (ADS)

Osborn, Douglas

2015-04-01

The U.S. Department of Energy's Federal Radiological Monitoring and Assessment Center Consequence Management Home Team (FRMAC/CMHT) Assessment Scientist's roles, responsibilities incorporate the FRMAC with other federal, state, and local agencies during a nuclear/radiological emergency. Before the Consequence Management Response Team arrives on-site, the FRMAC/CMHT provides technical and logistical support to the FRMAC and to state, local, and tribal authorities following a nuclear/radiological event. The FRMAC/CMHT support includes analyzing event data, evaluating hazards that relate to protection of the public, and providing event information and data products to protective action decision makers. The Assessment Scientist is the primary scientist responsible for performing calculations and analyses and communicating results to the field during any activation of the FRMAC/CMHT assets. As such, the FRMAC/CMHT Assessment Scientist has a number of different roles and responsibilities to fill depending upon the type of response that is required. Additionally, the Sandia National Laboratories (SNL) Consequence Assessment Team (CAT) Consequence Assessor roles, responsibilities involve hazardous materials operational emergency at SNL New Mexico facilities (SNL/NM) which include loss of control over radioactive, chemical, or explosive hazardous materials. When a hazardous materials operational emergency occurs, key decisions must be made in order to regain control over the hazards, protect personnel from the effects of the hazards, and mitigate impacts on operations, facilities, property, and the environment. Many of these decisions depend in whole or in part on the evaluation of potential consequences from a loss of control over the hazards. As such, the CAT has a number of different roles and responsibilities to fill depending upon the type of response that is required. Primary consequence-based decisions supported by the CAT during a hazardous materials operational emergency at SNL/NM include: (1) Onsite Protective Actions (2) Offsite Protective Action Recommendations (3) Event categorization (4) Event classification Other consequence-based decisions supported by the CAT include: (1) Response planning and operations (2) Event termination (3) Reentry planning and operations (4) Recovery planning and operations Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration.

Controlling organic chemical hazards in food manufacturing: a hazard analysis critical control points (HACCP) approach.

PubMed

Ropkins, K; Beck, A J

2002-08-01

Hazard analysis by critical control points (HACCP) is a systematic approach to the identification, assessment and control of hazards. Effective HACCP requires the consideration of all hazards, i.e., chemical, microbiological and physical. However, to-date most 'in-place' HACCP procedures have tended to focus on the control of microbiological and physical food hazards. In general, the chemical component of HACCP procedures is either ignored or limited to applied chemicals, e.g., food additives and pesticides. In this paper we discuss the application of HACCP to a broader range of chemical hazards, using organic chemical contaminants as examples, and the problems that are likely to arise in the food manufacturing sector. Chemical HACCP procedures are likely to result in many of the advantages previously identified for microbiological HACCP procedures: more effective, efficient and economical than conventional end-point-testing methods. However, the high costs of analytical monitoring of chemical contaminants and a limited understanding of formulation and process optimisation as means of controlling chemical contamination of foods are likely to prevent chemical HACCP becoming as effective as microbiological HACCP.

Development of consistent hazard controls for DOE transuranic waste operations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woody, W.J.

2007-07-01

This paper describes the results of a re-engineering initiative undertaken with the Department of Energy's (DOE) Office of Environmental Management (EM) in order to standardize hazard analysis assumptions and methods and resulting safety controls applied to multiple transuranic (TRU) waste operations located across the United States. A wide range of safety controls are historically applied to transuranic waste operations, in spite of the fact that these operations have similar operational characteristics and hazard/accident potential. The re-engineering effort supported the development of a DOE technical standard with specific safety controls designated for accidents postulated during waste container retrieval, staging/storage, venting, onsitemore » movements, and characterization activities. Controls cover preventive and mitigative measures; include both hardware and specific administrative controls; and provide protection to the facility worker, onsite co-located workers and the general public located outside of facility boundaries. The Standard development involved participation from all major DOE sites conducting TRU waste operations. Both safety analysts and operations personnel contributed to the re-engineering effort. Acknowledgment is given in particular to the following individuals who formed a core working group: Brenda Hawks, (DOE Oak Ridge Office), Patrice McEahern (CWI-Idaho), Jofu Mishima (Consultant), Louis Restrepo (Omicron), Jay Mullis (DOE-ORO), Mike Hitchler (WSMS), John Menna (WSMS), Jackie East (WSMS), Terry Foppe (CTAC), Carla Mewhinney (WIPP-SNL), Stephie Jennings (WIPP-LANL), Michael Mikolanis (DOESRS), Kraig Wendt (BBWI-Idaho), Lee Roberts (Fluor Hanford), and Jim Blankenhorn (WSRC). Additional acknowledgment is given to Dae Chung (EM) and Ines Triay (EM) for leadership and management of the re-engineering effort. (authors)« less

Occupational health hazards of working in the interventional laboratory: a multisite case control study of physicians and allied staff.

PubMed

Orme, Nicholas M; Rihal, Charanjit S; Gulati, Rajiv; Holmes, David R; Lennon, Ryan J; Lewis, Bradley R; McPhail, Ian R; Thielen, Kent R; Pislaru, Sorin V; Sandhu, Gurpreet S; Singh, Mandeep

2015-03-03

The occupational hazards of working in the interventional laboratory have been inadequately studied for physicians and remain unaddressed for nonphysician personnel. This study sought to determine whether the prevalence of work-related musculoskeletal pain, cancer, and other medical conditions is higher among physicians and allied staff who work in interventional laboratories compared with employees who do not. Mayo Clinic employees who work in affiliated hospitals with interventional cardiology or interventional radiology laboratories took an electronic survey. Results were stratified on the basis of self-reported occupational exposure to procedures that involve radiation. There were 1,543 employees (mean age 43 ± 11.3 years, 33% male) who responded to the survey (response rate of 57%), and 1,042 (67.5%) reported being involved with procedures utilizing radiation. These employees reported experiencing work-related pain more often than the control group before (54.7% vs. 44.7%; p < 0.001) and after adjustment for age, sex, body mass index, pre-existing musculoskeletal conditions, years in profession, and job description (odds ratio: 1.67; 95% confidence interval: 1.32 to 2.11; p < 0.001). Musculoskeletal pain varied significantly by job description, with the highest incidence reported by technicians (62%) and nurses (60%) followed by attending physicians (44%) and trainees (19%; p < 0.001). There was no difference in cancer prevalence between groups (9% vs. 9%; p = 0.96). Musculoskeletal pain is more common among healthcare workers who participate in interventional procedures and is highest in nonphysician employees. The diagnosis of cancer in employees who participate in procedures that utilize radiation was not elevated when compared to controls within the same departments, although any conclusion regarding causality is limited by the cross-sectional nature of the study, as well as the low overall prevalence of malignancy in our study group. Copyright © 2015 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

Occupational Safety and Health and Healthy Housing: A Review of Opportunities and Challenges.

PubMed

Jacobs, David E; Forst, Linda

Occupational safety and health (OSH) risks in construction of healthy housing (HH) have not been examined and collaboration between HH and OSH professionals is inadequate. The World Health Organization is developing international HH guidelines and the International Labour Organization is working to improve OSH in construction globally. We searched for exemplary reports (including gray literature) on construction hazards; preventive measures for occupants and workers; OSH frameworks, laws, and regulations; definitions; and HH. Healthy housing construction typically improves ventilation, moisture and mold, pest control, injury hazards, cleanability, maintenance, accessibility, thermal conditioning, and avoidance of toxic building materials. To date, this work is done without explicit requirements for worker health. Construction is among the most hazardous sectors around the globe, although protective measures are well known, including engineering and administrative controls and provision of personal protective equipment. Residential construction, renovation, repair, and maintenance are fragmented, consisting mostly of small companies without proper OSH training, equipment, and knowledge of HH principles. Residential construction is often undertaken by informal or unauthorized workers, putting them at high risk. Reduced exposure to toxic building materials is an example of a benefit for both workers and occupants if OSH and HH collaboration can be improved. By recognizing that homes under new construction or renovation are both a workplace and a residence, HH and OSH initiatives can apply public health principles to occupants and workers simultaneously. This article publishes key definitions, hazards and interventions common to both fields. A global increase in residential construction and renewed global interest in HH poses both risks and opportunities for primary prevention. Policy and practice interventions can benefit the health of occupants and those who work on their homes. Improvements in legislation, regulation, and international frameworks are needed to maximize OSH and HH collaboration and realize significant cobenefits. Occupational safety and health and HH standards should include requirements to protect both workers and occupants. Because homes can also be workplaces, both workers and housing occupants will receive important cobenefits when OSH and HH standards use proven interventions to protect workers and occupants.

Supervisory Control of Remote Manipulation with Compensation for Moving Target.

DTIC Science & Technology

1980-07-21

Continue on reveree aide if neceeary and Identify by block number) ’The aim of this project is to evaluate automatic compensation for moving tar- gets ...slave control. Operating manipulators in this way is a tiring job and the operator gets exhausted after j a short time of work. The use of the computer...THE MANIPULATION OF MOVING OBJECTS Undersea tasks done by human divers are getting more and more costly and hazardous as they have to be done at

Rapid microbiology - raising awareness.

PubMed

Bailie, Jonathan

2016-01-01

A 'high-level overview' of some of the emerging rapid microbiology technologies designed to help healthcare engineering and infection control teams working in hospitals and other healthcare facilities more rapidly identify potentially hazardous levels of waterborne microorganisms in their water systems, enabling them to take prompt remedial action, and a look at the some of the 'pros and cons' of such testing techniques, was given by Nalco technical director, Howard Barnes, the vice-chair of the Legionella Control Association (LCA), at a recent LCA open day. HEJ editor, Jonathan Bailie, reports.

Brick mortar exposure and chronic lymphocytic leukemia.

PubMed

Markovic-Denic, L; Jankovic, S; Marinkovic, J; Radovanovic, Z

1995-01-01

A case-control study of 130 patients with chronic lymphocytic leukemia (CLL) and 130 controls matched with respect to sex, age (2 years), type of residence (urban-rural) and area of residence (according to the national per capita income) was carried out. Conditional logistic regression analysis showed that, apart of four risk factors already described in the literature (work in a hazardous industry, hair dye use, family history of leukemia and exposure to electromagnetic radiation), brick mortar exposure was also significantly related to CLL.

Material Science

NASA Image and Video Library

2003-01-12

The Center for Advanced Microgravity Materials Processing (CAMMP), a NASA-sponsored Research Partnership Center, is working to improve zeolite materials for storing hydrogen fuel. CAMMP is also applying zeolites to detergents, optical cables, gas and vapor detection for environmental monitoring and control, and chemical production techniques that significantly reduce by-products that are hazardous to the environment. Shown here are zeolite crystals (top) grown in a ground control experiment and grown in microgravity on the USML-2 mission (bottom). Zeolite experiments have also been conducted aboard the International Space Station.

Perception and prevalence of work-related health hazards among health care workers in public health facilities in southern India

PubMed Central

Senthil, Arasi; Anandh, Balasubramanian; Jayachandran, Palsamy; Thangavel, Gurusamy; Josephin, Diana; Yamini, Ravindran; Kalpana, Balakrishnan

2015-01-01

Background: Health care workers (HCWs) are exposed to occupational related health hazards. Measuring worker perception and the prevalence of these hazards can help facilitate better risk management for HCWs, as these workers are envisaged to be the first point of contact, especially in resource poor settings. Objective: To describe the perception of occupational health hazards and self-reported exposure prevalence among HCWs in Southern India. Methods: We used cross sectional design with stratified random sampling of HCWs from different levels of health facilities and categories in a randomly selected district in Southern India. Data on perception and exposure prevalence were collected using a structured interview schedule developed by occupational health experts and administered by trained investigators. Results: A total of 482 HCWs participated. Thirty nine percent did not recognize work-related health hazards, but reported exposure to at least one hazard upon further probing. Among the 81·5% who reported exposure to biological hazard, 93·9% had direct skin contact with infectious materials. Among HCWs reporting needle stick injury, 70·5% had at least one in the previous three months. Ergonomic hazards included lifting heavy objects (42%) and standing for long hours (37%). Psychological hazards included negative feelings (20·3%) and verbal or physical abuse during work (20·5%). Conclusion: More than a third of HCWs failed to recognize work-related health hazards. Despite training in handling infectious materials, HCWs reported direct skin contact with infectious materials and needle stick injuries. Results indicate the need for training oriented toward behavioral change and provision of occupational health services. PMID:25482656

Using hazard maps to identify and eliminate workplace hazards: a union-led health and safety training program.

PubMed

Anderson, Joe; Collins, Michele; Devlin, John; Renner, Paul

2012-01-01

The Institute for Sustainable Work and Environment and the Utility Workers Union of America worked with a professional evaluator to design, implement, and evaluate the results of a union-led system of safety-based hazard identification program that trained workers to use hazard maps to identify workplace hazards and target them for elimination. The evaluation documented program implementation and impact using data collected from both qualitative interviews and an on-line survey from worker trainers, plant managers, and health and safety staff. Managers and workers reported that not only were many dangerous hazards eliminated as a result of hazard mapping, some of which were long-standing, difficult-to-resolve issues, but the evaluation also documented improved communication between union members and management that both workers and managers agreed resulted in better, more sustainable hazard elimination.

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 21 Food and Drugs 2 2012-04-01 2012-04-01 false Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... processor shall have and implement a written HACCP plan whenever a hazard analysis reveals one or more food...

21 CFR 123.6 - Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 2 2010-04-01 2010-04-01 false Hazard analysis and Hazard Analysis Critical Control Point (HACCP) plan. 123.6 Section 123.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF... processor shall have and implement a written HACCP plan whenever a hazard analysis reveals one or more food...

78 FR 11611 - Current Good Manufacturing Practice and Hazard Analysis and Risk-Based Preventive Controls for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-19

... Manufacturing Practice and Hazard Analysis and Risk- Based Preventive Controls for Human Food; Extension of... Analysis and Risk-Based Preventive Controls for Human Food.'' FOR FURTHER INFORMATION CONTACT: Domini Bean... Practice and Hazard Analysis and Risk-Based Preventive Controls for Human Food'' with a 120-day comment...

Awareness of occupational health hazards and the practice of universal safety precautions among mortuary workers in South West Nigeria.

PubMed

Ogunnowo, Babatunde E; Anunobi, Charles C; Onajole, Adebayo T; Odeyemi, Kofoworola A

2010-01-01

Mortuary workers face hazards at work such as infectious diseases, chemical and psychosocial hazards among others. If workers are to participate in activities to safeguard their health, they must be aware of the risks at work. The objective of the study is to assess the awareness of occupational health hazards and to determine their practice of universal safety precautions. A descriptive, cross sectional study was carried out among all the mortuary workers in teaching hospitals in South West Nigeria. The study material was a self administered questionnaire used for Data collection between March and May 2008. Data was analyzed by EPI-INFO 2002. The Chi-square test was used for statistical association with a p-value of 0.05. A total of 76 mortuary workers was surveyed with a mean age of 38.2 yrs. They were mostly male (92%). Forty-five (59.2%) of the respondents were aware of hazards at work. The hazards identified were HIV/AIDS (97.7%), tuberculosis (82%) and formalin related morbidity. 14 (18.4%) rated the risk faced at work as moderate/high risk. Only 36.8% always used face masks. About 40 (53.3%) had received at least one dose of Hepatitis B vaccine. There was no association between awareness of hazards and practice of universal safety precautions The awareness of occupational hazards among the workers was fair while the practice of universal safety precautions was suboptimal. There is a need for periodic training programmes on occupational hazards as well as the vaccination of all workers with three doses of Hepatitis B Vaccine.

Chemical dependency: an occupational hazard in the field of anaesthesia.

PubMed

Ismail, Samina

2010-10-01

The medical personnel are vulnerable to substance abuse and dependence due to ready access to substance of abuse. Addiction is considered as an occupational hazard for those involved in the practice of anaesthesia for the same reason. Substance abuse is defined as a psychosocial biogenetic disease, which results from dynamic interplay between a susceptible host and favourable environment. According to the 5th and the last National Survey on Drug Abuse (NSDA) in 1993 by Pakistan Narcotic Control, there are nearly three million drug dependants in Pakistan, but no data is available to determine the prevalence among medical or anaesthesia personnel. In order to handle the rising trend of chemical abuse, we need to have more surveys and studies on this subject, written policy and educational programme in postgraduate training with proper control and frequent checking of narcotic dispensing. Reporting of drug abuse and rehabilitation of affected doctors are areas which need to be worked upon.

Cold blast furnace syndrome: a new source of toxic inhalation by nitrogen oxides.

PubMed

Tague, I; Llewellin, P; Burton, K; Buchan, R; Yates, D H

2004-05-01

To describe a new toxic inhalation syndrome in blast furnace workers. Fourteen workers developed acute respiratory symptoms shortly after exposure to "air blast" from blast furnace tuyeres. These included chest tightness, dyspnoea, rigors, and diaphoresis. Chest radiographs showed pulmonary infiltrates, and lung function a restrictive abnormality. This report includes a description of clinical features of the affected workers and elucidation of the probable cause of the outbreak. Clinical features and occupational hygiene measurements suggested the most likely cause was inhalation of nitrogen oxides at high pressure and temperature. While the task could not be eliminated, engineering controls were implemented to control the hazard. No further cases have occurred. "Cold blast furnace syndrome" represents a previously undescribed hazard of blast furnace work, probably due to inhalation of nitrogen oxides. It should be considered in the differential diagnosis of acute toxic inhalational injuries in blast furnace workers.

Cold blast furnace syndrome: a new source of toxic inhalation by nitrogen oxides

PubMed Central

Tague, I; Llewellin, P; Burton, K; Buchan, R; Yates, D

2004-01-01

Methods: Fourteen workers developed acute respiratory symptoms shortly after exposure to "air blast" from blast furnace tuyeres. These included chest tightness, dyspnoea, rigors, and diaphoresis. Chest radiographs showed pulmonary infiltrates, and lung function a restrictive abnormality. This report includes a description of clinical features of the affected workers and elucidation of the probable cause of the outbreak. Results: Clinical features and occupational hygiene measurements suggested the most likely cause was inhalation of nitrogen oxides at high pressure and temperature. While the task could not be eliminated, engineering controls were implemented to control the hazard. No further cases have occurred. Conclusions: "Cold blast furnace syndrome" represents a previously undescribed hazard of blast furnace work, probably due to inhalation of nitrogen oxides. It should be considered in the differential diagnosis of acute toxic inhalational injuries in blast furnace workers. PMID:15090669

In-flight detection and identification and accommodation of aircraft icing

NASA Astrophysics Data System (ADS)

Caliskan, Fikret; Hajiyev, Chingiz

2012-11-01

The recent improvements and research on aviation have focused on the subject of aircraft safe flight even in the severe weather conditions. As one type of such weather conditions, aircraft icing considerably has negative effects on the aircraft flight performance. The risks of the iced aerodynamic surfaces of the flying aircraft have been known since the beginning of the first flights. Until recent years, as a solution for this event, the icing conditions ahead flight route are estimated from radars or other environmental sensors, hence flight paths are changed, or, if it exists, anti-icing/de-icing systems are used. This work aims at the detection and identification of airframe icing based on statistical properties of aircraft dynamics and reconfigurable control protecting aircraft from hazardous icing conditions. In this paper, aircraft icing identification based on neural networks is investigated. Following icing identification, reconfigurable control is applied for protecting the aircraft from hazardous icing conditions.

Implementing a resource management program for accreditation process at the medical laboratory.

PubMed

Yenice, Sedef

2009-03-01

To plan for and provide adequate resources to meet the mission and goals of a medical laboratory in compliance with the requirements for laboratory accreditation by Joint Commission International. The related policies and procedures were developed based on standard requirements for resource management. Competency assessment provided continuing education and performance feedback to laboratory employees. Laboratory areas were designed for the efficient and safe performance of laboratory work. A physical environment was built up where hazards were controlled and personnel activities were managed to reduce the risk of injuries. An Employees Occupational Safety and Health Program (EOSHP) was developed to address all types of hazardous materials and wastes. Guidelines were defined to verify that the methods would produce accurate and reliable results. An active resource management program will be an effective way of assuring that systems are in control and continuous improvement is in progress.

Improving tsunami resiliency: California's Tsunami Policy Working Group

USGS Publications Warehouse

Real, Charles R.; Johnson, Laurie; Jones, Lucile M.; Ross, Stephanie L.; Kontar, Y.A.; Santiago-Fandiño, V.; Takahashi, T.

2014-01-01

California has established a Tsunami Policy Working Group to facilitate development of policy recommendations for tsunami hazard mitigation. The Tsunami Policy Working Group brings together government and industry specialists from diverse fields including tsunami, seismic, and flood hazards, local and regional planning, structural engineering, natural hazard policy, and coastal engineering. The group is acting on findings from two parallel efforts: The USGS SAFRR Tsunami Scenario project, a comprehensive impact analysis of a large credible tsunami originating from an M 9.1 earthquake in the Aleutian Islands Subduction Zone striking California’s coastline, and the State’s Tsunami Preparedness and Hazard Mitigation Program. The unique dual-track approach provides a comprehensive assessment of vulnerability and risk within which the policy group can identify gaps and issues in current tsunami hazard mitigation and risk reduction, make recommendations that will help eliminate these impediments, and provide advice that will assist development and implementation of effective tsunami hazard risk communication products to improve community resiliency.

30 CFR 57.4660 - Work in shafts, raises, or winzes and other activities involving hazard areas.

Code of Federal Regulations, 2014 CFR

2014-07-01

...-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Welding/cutting/compressed Gases § 57.4660... cutting with an electric arc or open flame More than 1 gallon of combustible liquid, unless in a closed... combustible plastics. Soldering or thawing with an open flame Within 10 feet of— Materials in a shaft, raise...

30 CFR 57.4660 - Work in shafts, raises, or winzes and other activities involving hazard areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Welding/cutting/compressed Gases § 57.4660... cutting with an electric arc or open flame More than 1 gallon of combustible liquid, unless in a closed... combustible plastics. Soldering or thawing with an open flame Within 10 feet of— Materials in a shaft, raise...

30 CFR 57.4660 - Work in shafts, raises, or winzes and other activities involving hazard areas.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Welding/cutting/compressed Gases § 57.4660... cutting with an electric arc or open flame More than 1 gallon of combustible liquid, unless in a closed... combustible plastics. Soldering or thawing with an open flame Within 10 feet of— Materials in a shaft, raise...

30 CFR 57.4660 - Work in shafts, raises, or winzes and other activities involving hazard areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-UNDERGROUND METAL AND NONMETAL MINES Fire Prevention and Control Welding/cutting/compressed Gases § 57.4660... cutting with an electric arc or open flame More than 1 gallon of combustible liquid, unless in a closed... combustible plastics. Soldering or thawing with an open flame Within 10 feet of— Materials in a shaft, raise...

30 CFR 75.202 - Protection from falls of roof, face and ribs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Protection from falls of roof, face and ribs... Protection from falls of roof, face and ribs. (a) The roof, face and ribs of areas where persons work or travel shall be supported or otherwise controlled to protect persons from hazards related to falls of the...

30 CFR 75.202 - Protection from falls of roof, face and ribs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Protection from falls of roof, face and ribs... Protection from falls of roof, face and ribs. (a) The roof, face and ribs of areas where persons work or travel shall be supported or otherwise controlled to protect persons from hazards related to falls of the...

30 CFR 75.202 - Protection from falls of roof, face and ribs.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Protection from falls of roof, face and ribs... Protection from falls of roof, face and ribs. (a) The roof, face and ribs of areas where persons work or travel shall be supported or otherwise controlled to protect persons from hazards related to falls of the...

30 CFR 75.202 - Protection from falls of roof, face and ribs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Protection from falls of roof, face and ribs... Protection from falls of roof, face and ribs. (a) The roof, face and ribs of areas where persons work or travel shall be supported or otherwise controlled to protect persons from hazards related to falls of the...

30 CFR 75.202 - Protection from falls of roof, face and ribs.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Protection from falls of roof, face and ribs... Protection from falls of roof, face and ribs. (a) The roof, face and ribs of areas where persons work or travel shall be supported or otherwise controlled to protect persons from hazards related to falls of the...

[Hazardous material and safety conditions in veterinary practice. 2: Flammable liquid, disinfectants and cleansing media, cytostatics, pressurized gases, liquid nitrogen, narcotic gases, mailing of diagnostic samples, hazardous waste].

PubMed

Sliwinski-Korell, A; Lutz, F

1998-05-01

In the last years the standards for professional handling of hazardous material as well as health and safety in the veterinary practice became considerably more stringent. This is expressed in various safety regulations, particularly the decree of hazardous material and the legislative directives concerning health and safety at work. In part 1, a definition based on the law for hazardous material was given and the potential risks were mentioned. The correct documentation regarding the protection of personal and the purchase, storage, working conditions and removal of hazardous material was explained. General rules for the handling of hazardous material were described. In part 2, partial emphasis is put on the handling of flammable liquids, disinfectants, cytostatica, pressurised gases, liquid nitrogen, narcotics, mailing of potentially infectious material and safe disposal of hazardous waste. Advice about possible unrecognized hazards and references are also given.

[Temperament risk factor for mental health disturbances in the judiciary staff].

PubMed

Orlak, Katarzyna; Tylka, Jan

2017-05-16

The aim of this paper was to examine how temperament might moderate the health impact of psychosocial hazards at work and thus to attempt to identify the temperament risk factor in the judiciary staff. The data were collected from 355 court employees, including judges, judicial assistants, court clerks and service workers from criminal, civil, commercial as well as from labor and social insurance divisions. The psychosocial work environment was measured with the Psychosocial Working Conditions Questionnaire by Cieślak and Widerszal-Bazyl, temperament with Cloninger's Temperament and Character Inventory adopted by Hornowska and employee health status was screened with Goldberg's General Health Questionnaire- 28 (GHQ-28) adopted by Makowska and Merecz. The health impact of job strain with moderating effects of temperament traits was estimated with logistic regression (forward stepwise selection based on the likelihood ratio for the model). The analyses confirmed the moderating role of temperament in the health consequences of work-related stress. High score in novelty seeking was identified as independent temperament risk factor for mental health disturbances in judiciary staff facing at least medium job demands. The job control was a protective factor while relative risk of negative health outcomes was also elevated due to female gender. Temperament may control sensitivity to the environmental exposure to psychosocial hazards at work and its health consequences. Further research is needed to explore and understand better the moderating role of temperament in the relation between job stress (strain) and health in different vocational groups and workplaces. Med Pr 2017;68(3):375-390. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Economic impact of stimulated technological activity. Part 3: Case study, knowledge additions and earth links from space crew systems

NASA Technical Reports Server (NTRS)

1971-01-01

A case study of knowledge contributions from the crew life support aspect of the manned space program is reported. The new information needed to be learned, the solutions developed, and the relation of new knowledge gained to earthly problems were investigated. Illustrations are given in the following categories: supplying atmosphere for spacecraft; providing carbon dioxide removal and recycling; providing contaminant control and removal; maintaining the body's thermal balance; protecting against the space hazards of decompression, radiation, and meteorites; minimizing fire and blast hazards; providing adequate light and conditions for adequate visual performance; providing mobility and work physiology; and providing adequate habitability.

[Occupational injuries among construction workers in Hong Kong].

PubMed

Huang, Zihui; Chen, Weiqing

2002-02-01

To explore the nature and severity of occupational injuries among construction workers and its risk factors in Hong Kong. One hundred and twenty-two injured construction workers in a public hospital and an equal number of workmate controls were studied. Contents included socio -demographic characteristics, the availability and use of safety equipment, smoking and alcohol consumption, etc. Abbreviated injury scale (AIS) and injury severity score (ISS) were employed for describing the nature, pattern and severity of injuries. Single injuries were seen in 80% of cases. Of 149 injuries classified by body region, 49% were external, 26% involved either the upper or lower extremities, and 11% were spinal injuries. Working at height was associated with the injury severity score. Safety hazards were identified in the work environment in 68% of the cases. Significant odds ratios for accidents were obtained for 'no formal education', 'non safety training' and 'current smokers'. The results implicated that construction was a hazardous occupation in Hong Kong. Improving the work environment and promoting safety education among construction workers would be helpful for minimizing or eliminating occupational injuries in construction occupation in Hong Kong.

A policy analysis of the problem of the reproductive health of women in the workplace.

PubMed

Kotch, J B; Ossler, C C; Howze, D C

1984-06-01

Many occupations in which women comprise the majority of the workforce involve exposure to biological, physical, and chemical hazards. Potential reproductive effects of work-related substances include impaired reproductive capacity, mutagenesis, teratogenesis, and transplacental carcinogenesis. However, female-dominated occupations tend to be only minimally regulated by the US Occupational Safety and Health Administration, and the corporate response to the issue of reproductive and fetal health has been to institute "protective discrimination policies" such as the demotion or exclusion of women of childbearing age from certain jobs. This article rates the effectiveness of alternate policy responses to increase women's occupational health and safety through use of a series of analysis criteria: equity, efficiency, preference satisfaction, right to privacy, avoidance of stigma, and unintended consequences. Policy options include the following: 1) do nothing, 2) leave current policies intact while supporting a research program to document the health consequences of specific occupational risks to women's reproductive health, 3) restrict women for who pregnancy is not ruled out from occupations or work areas known or suspected to be hazardous, 4) improve working conditions for all women, and 5) improve working conditions for all workers. Policy analysis suggests the working conditions of all workers should be improved. This alternative reduces inequity, eliminates stigma, maintains privacy, and honors preferences. Implementation of this policy would be expensive, requiring an increase in knowledge of the effects of industrial substances on female and male reproductive health, expansion of the technical capacity to control occupational hazards, and an increase in the resources of programs that monitor and regulate occupational health. However, this approach is in accord with growing concern that workers should not have to compromise their health to keep their jobs.

Job Strain and the Risk of Inflammatory Bowel Diseases: Individual-Participant Meta-Analysis of 95 000 Men and Women

PubMed Central

Heikkilä, Katriina; Madsen, Ida E. H.; Nyberg, Solja T.; Fransson, Eleonor I.; Ahola, Kirsi; Alfredsson, Lars; Bjorner, Jakob B.; Borritz, Marianne; Burr, Hermann; Dragano, Nico; Ferrie, Jane E.; Knutsson, Anders; Koskenvuo, Markku; Koskinen, Aki; Nielsen, Martin L.; Nordin, Maria; Pejtersen, Jan H.; Pentti, Jaana; Rugulies, Reiner; Oksanen, Tuula; Shipley, Martin J.; Suominen, Sakari B.; Theorell, Töres; Väänänen, Ari; Vahtera, Jussi; Virtanen, Marianna; Westerlund, Hugo; Westerholm, Peter J. M.; Batty, G. David; Singh-Manoux, Archana; Kivimäki, Mika

2014-01-01

Background and Aims Many clinicians, patients and patient advocacy groups believe stress to have a causal role in inflammatory bowel diseases, such as Crohn's disease and ulcerative colitis. However, this is not corroborated by clear epidemiological research evidence. We investigated the association between work-related stress and incident Crohn's disease and ulcerative colitis using individual-level data from 95 000 European adults. Methods We conducted individual-participant data meta-analyses in a set of pooled data from 11 prospective European studies. All studies are a part of the IPD-Work Consortium. Work-related psychosocial stress was operationalised as job strain (a combination of high demands and low control at work) and was self-reported at baseline. Crohn's disease and ulcerative colitis were ascertained from national hospitalisation and drug reimbursement registers. The associations between job strain and inflammatory bowel disease outcomes were modelled using Cox proportional hazards regression. The study-specific results were combined in random effects meta-analyses. Results Of the 95 379 participants who were free of inflammatory bowel disease at baseline, 111 men and women developed Crohn's disease and 414 developed ulcerative colitis during follow-up. Job strain at baseline was not associated with incident Crohn's disease (multivariable-adjusted random effects hazard ratio: 0.83, 95% confidence interval: 0.48, 1.43) or ulcerative colitis (hazard ratio: 1.06, 95% CI: 0.76, 1.48). There was negligible heterogeneity among the study-specific associations. Conclusions Our findings suggest that job strain, an indicator of work-related stress, is not a major risk factor for Crohn's disease or ulcerative colitis. PMID:24558416

[Status of lead exposure and its impact on health of workers in an accumulator factory].

PubMed

Liang, Jiabin; Zhang, Jian; Guo, Xiaojing; Mai, Jianping; Wang, Zhi; Liu, Yimin

2014-02-01

To identify the occupational hazard factors in an accumulator factory, to analyze the status of internal and external lead exposure and evaluate the impact of lead exposure on the health of workers in the accumulator industry, and to provide a theoretical basis for improved lead exposure criteria and technical support for the control of lead contamination in the accumulator industry. An on-site investigation was carried out to monitor and evaluate the lead fume and dust in the workplaces of an accumulator factory, and occupational health examination was performed in all workers. The occupational hazard safeguards in the accumulator factory were unadvanced. The contamination of lead fume and dust was serious. The abnormal rate of blood lead was up to 79.80%, and many workers developed anemia and mild peripheral nerve disease. Lead contamination is serious in the accumulator factory, leading to poor health of workers. It is essential to take effective control measures, improve the working environment, provide occupational health education, increase workers' self-protection awareness, and periodically conduct occupational hazard monitoring and health surveillance. The government must reinforce occupational health supervision of such enterprises.

User interface prototype for geospatial early warning systems - a tsunami showcase

NASA Astrophysics Data System (ADS)

Hammitzsch, M.; Lendholt, M.; Esbrí, M. Á.

2012-03-01

The command and control unit's graphical user interface (GUI) is a central part of early warning systems (EWS) for man-made and natural hazards. The GUI combines and concentrates the relevant information of the system and offers it to human operators. It has to support operators successfully performing their tasks in complex workflows. Most notably in critical situations when operators make important decisions in a limited amount of time, the command and control unit's GUI has to work reliably and stably, providing the relevant information and functionality with the required quality and in time. The design of the GUI application is essential in the development of any EWS to manage hazards effectively. The design and development of such GUI is performed repeatedly for each EWS by various software architects and developers. Implementations differ based on their application in different domains. But similarities designing and equal approaches implementing GUIs of EWS are not quite harmonized enough with related activities and do not exploit possible synergy effects. Thus, the GUI's implementation of an EWS for tsunamis is successively introduced, providing a generic approach to be applied in each EWS for man-made and natural hazards.

Health-hazard evaluation report HETA 88-030-2109, Neiman Sawmills, Inc. , Hulett, Wyoming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tubbs, R.L.

1991-04-01

In response to a request from management, an evaluation was undertaken of possible hazardous working conditions as a result of excessive noise at the Neiman Sawmill facilities (SIC-2421), Hulett, Wyoming. The company produced several varieties of untreated boards and lumber products from pine logs. During this survey 108 workers were employed. Noise dosimetry readings revealed that 73% of the surveyed job descriptions (16 of 22) had time weighted average (TWA) noise levels in excess of 90 decibles-A (dBA). Only one job had TWA levels less than the NIOSH recommended limits of 85dBA. Engineering noise controls produced differing amounts of noisemore » reduction to the workers. An enclosure around the planer in the planer mill was found to be effective. However, the separation of the edger and trimmer operations to their own buildings was not an effective noise reduction technique. Hearing tests revealed that 72.5% of the employees exhibited some degree of hearing impairment at one or more audiometric test frequencies. The author concludes that a health hazard existed for workers. The author recommends that a comprehensive hearing conservation program should be implemented. Recommendations for engineering controls for the mills are included.« less

Reviewing and visualizing the interactions of natural hazards

NASA Astrophysics Data System (ADS)

Gill, Joel C.; Malamud, Bruce D.

2014-12-01

This paper presents a broad overview, characterization, and visualization of the interaction relationships between 21 natural hazards, drawn from six hazard groups (geophysical, hydrological, shallow Earth, atmospheric, biophysical, and space hazards). A synthesis is presented of the identified interaction relationships between these hazards, using an accessible visual format particularly suited to end users. Interactions considered are primarily those where a primary hazard triggers or increases the probability of secondary hazards occurring. In this paper we do the following: (i) identify, through a wide-ranging review of grey- and peer-review literature, 90 interactions; (ii) subdivide the interactions into three levels, based on how well we can characterize secondary hazards, given information about the primary hazard; (iii) determine the spatial overlap and temporal likelihood of the triggering relationships occurring; and (iv) examine the relationship between primary and secondary hazard intensities for each identified hazard interaction and group these into five possible categories. In this study we have synthesized, using accessible visualization techniques, large amounts of information drawn from many scientific disciplines. We outline the importance of constraining hazard interactions and reinforce the importance of a holistic (or multihazard) approach to natural hazard assessment. This approach allows those undertaking research into single hazards to place their work within the context of other hazards. It also communicates important aspects of hazard interactions, facilitating an effective analysis by those working on reducing and managing disaster risk within both the policy and practitioner communities.

[Risks and health problems caused by the use of video terminals].

PubMed

Tamez González, Silvia; Ortiz-Hernández, Luis; Martínez-Alcántara, Susana; Méndez-Ramírez, Ignacio

2003-01-01

To evaluate the association between video display terminal (VDT) use and health hazards, occupational risks, and psychosocial factors, in newspaper workers. A cross-sectional study was conducted in 1998 in a representative sample (n = 68) drawn from a population of 218 VDT operators in Mexico City. Data were collected using a self-administered questionnaire. Data were confirmed by performing physical examinations. The research hypothesis was that both the current and cumulative use of VDT are associated with visual, musculoskeletal system, and skin illnesses, as well as with fatigue and mental or psychosomatic disorders. Occupational health hazards were assessed (visual problems, postural risks, sedentary work, computer mouse use, excessive heat, and overcrowding), as well as psychosocial factors related to work organization (psychological demands, work control, and social support). Prevalence ratios were adjusted for confounding variables like age, sex and schooling. Women were more likely than men to have upper extremity musculoskeletal disorders (MSD), dermatitis, and seborrheic eczema. VDT use was associated with neuro-visual fatigue, upper extremity MSD, dermatitis, and seborrheic eczema. Computer mouse use and postural risks were significantly associated with health problems. Psychosocial factors were mainly associated with mental problems, psychosomatic disorders, and fatigue. Intense use of video screens has been found to cause musculoskeletal disorders of the hand. The diversification of tasks and control of labor processes itself had a protective effect against psychosomatic disorders and pathological fatigue.

Childhood Lead Poisoning: Conservative Estimates of the Social and Economic Benefits of Lead Hazard Control

PubMed Central

Gould, Elise

2009-01-01

Background This study is a cost–benefit analysis that quantifies the social and economic benefits to household lead paint hazard control compared with the investments needed to minimize exposure to these hazards. Objectives This research updates estimates of elevated blood lead levels among a cohort of children ≤ 6 years of age and compiles recent research to determine a range of the costs of lead paint hazard control ($1–$11 billion) and the benefits of reduction attributed to each cohort for health care ($11–$53 billion), lifetime earnings ($165–$233 billion), tax revenue ($25–$35 billion), special education ($30–$146 million), attention deficit–hyperactivity disorder ($267 million), and the direct costs of crime ($1.7 billion). Results Each dollar invested in lead paint hazard control results in a return of $17–$221 or a net savings of $181–269 billion. Conclusions There are substantial returns to investing in lead hazard control, particularly targeted at early intervention in communities most likely at risk. Given the high societal costs of inaction, lead hazard control appears to be well worth the price. PMID:19654928

Global Precipitation Measurement (GPM) Safety Inhibit Timeline Tool

NASA Technical Reports Server (NTRS)

Dion, Shirley

2012-01-01

The Global Precipitation Measurement (GPM) Observatory is a joint mission under the partnership by National Aeronautics and Space Administration (NASA) and the Japan Aerospace Exploration Agency (JAXA), Japan. The NASA Goddard Space Flight Center (GSFC) has the lead management responsibility for NASA on GPM. The GPM program will measure precipitation on a global basis with sufficient quality, Earth coverage, and sampling to improve prediction of the Earth's climate, weather, and specific components of the global water cycle. As part of the development process, NASA built the spacecraft (built in-house at GSFC) and provided one instrument (GPM Microwave Imager (GMI) developed by Ball Aerospace) JAXA provided the launch vehicle (H2-A by MHI) and provided one instrument (Dual-Frequency Precipitation Radar (DPR) developed by NTSpace). Each instrument developer provided a safety assessment which was incorporated into the NASA GPM Safety Hazard Assessment. Inhibit design was reviewed for hazardous subsystems which included the High Gain Antenna System (HGAS) deployment, solar array deployment, transmitter turn on, propulsion system release, GMI deployment, and DPR radar turn on. The safety inhibits for these listed hazards are controlled by software. GPM developed a "pathfinder" approach for reviewing software that controls the electrical inhibits. This is one of the first GSFC in-house programs that extensively used software controls. The GPM safety team developed a methodology to document software safety as part of the standard hazard report. As part of this process a new tool "safety inhibit time line" was created for management of inhibits and their controls during spacecraft buildup and testing during 1& Tat GSFC and at the Range in Japan. In addition to understanding inhibits and controls during 1& T the tool allows the safety analyst to better communicate with others the changes in inhibit states with each phase of hardware and software testing. The tool was very useful for communicating compliance with safety requirements especially when working with a foreign partner.

Prevalence of hazardous exposures in veterinary practice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wiggins, P.; Schenker, M.B.; Green, R.

1989-01-01

All female graduates of a major U.S. veterinary school were surveyed by mailed questionnaire to obtain details of work practice and hazard exposure during the most recent year worked and during all pregnancies. Exposure questions were based on previously implicated occupational hazards which included anesthetic gases, radiation, zoonoses, prostaglandins, vaccines, physical trauma, and pesticides. The response rate was 86% (462/537). We found that practice type and pregnancy status were major determinants of hazard exposure within the veterinary profession. Small-animal practitioners reported the highest rates of exposure to anesthetic gas (94%), X-ray (90%), and pesticides (57%). Large-animal practitioners reported greater ratesmore » of trauma (64%) and potential exposure to prostaglandins (92%), Brucella abortus vaccine (23%), and carbon monoxide (18%). Potentially hazardous workplace practices or equipment were common. Forty-one percent of respondents who reported taking X-rays did not wear film badges, and 76% reported physically restraining animals for X-ray procedures. Twenty-seven percent of the respondents exposed to anesthetic gases worked at facilities which did not have waste anesthetic gas scavenging systems. Women who worked as veterinarians during a pregnancy attempted to reduce exposures to X-rays, insecticides, and other potentially hazardous exposures. Some potentially hazardous workplace exposures are common in veterinary practice, and measures to educate workers and to reduce these exposures should not await demonstration of adverse health effects.« less

[Present state of occupational hazards in automobile maintenance industry in Beijing, China].

PubMed

Li, Jue; Wang, Huining; Wang, Zhongxu; Wang, Hong; Niu, Dongsheng; Xu, Xiaohong; Sun, Wei

2014-06-01

To explore the present state of occupational hazards and health status of workers in the automobile maintenance industry. The monitoring results of occupational hazards in 25 automobile maintenance companies, occupational health examination results of 751 male workers in 63 automobile maintenance companies, and physical examination results of 205 male students in one Research Institute were statistically analyzed in 2012. The concentrations of benzene, toluene, xylene, ethyl acetate, and butyl acetate in the workplace were 0.3∼21.7, 0.4∼40.3, 0.4∼84.8, 1.9∼34.3, and 0.7∼516.7 mg/m(3), respectively; benzene concentration exceeded the upper limit in two workplaces, and butyl acetate concentration exceeded the upper limit in one workplace. The intensity of noise was 70.3∼ 91.3 dB (A) and exceeded the upper limit in one workplace. The prevalence of blood system involvement in spray painters was 15.6%, significant higher than that of the control group (P < 0.05). High-frequency hearing loss was detected in 53.9%of all metalers. Logistic regression analysis indicated that blood system involvement was not correlated with age and working years in spray painters; high-frequency hearing loss in metalers was positively correlated with age, but not correlated with working years. The status of occupational hazards in the automobile maintenance industry should not be neglected, and the management of noxious positions and personal protection should be strengthened in enterprises.

Occupational health assessment of chromite toxicity among Indian miners

PubMed Central

Das, Alok Prasad; Singh, Shikha

2011-01-01

Elevated concentration of hexavalent chromium pollution and contamination has contributed a major health hazard affecting more than 2 lakh mine workers and inhabitants residing in the Sukinda chromite mine of Odisha, India. Despite people suffering from several forms of ill health, physical and mental deformities, constant exposure to toxic wastes and chronic diseases as a result of chromite mining, there is a tragic gap in the availability of 'scientific’ studies and data on the health hazards of mining in India. Occupational Safety and Health Administration, Odisha State Pollution Control Board and the Odisha Voluntary Health Association data were used to compile the possible occupational health hazards, hexavalent chromium exposure and diseases among Sukinda chromite mines workers. Studies were reviewed to determine the routes of exposure and possible mechanism of chromium induced carcinogenicity among the workers. Our studies suggest all forms of hexavalent chromium are regarded as carcinogenic to workers however the most important routes of occupational exposure to Cr (VI) are inhalation and dermal contact. This review article outlines the physical, chemical, biological and psychosocial occupational health hazards of chromite mining and associated metallurgical processes to monitor the mining environment as well as the miners exposed to these toxicants to foster a safe work environment. The authors anticipate that the outcome of this manuscript will have an impact on Indian chromite mining industry that will subsequently bring about improvements in work conditions, develop intervention experiments in occupational health and safety programs. PMID:21808494

14 CFR 417.409 - System hazard controls.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., or system must account for static and dynamic loads, environmental stresses, and expected wear; (3... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false System hazard controls. 417.409 Section 417... OF TRANSPORTATION LICENSING LAUNCH SAFETY Ground Safety § 417.409 System hazard controls. (a) General...

Risk Assessment Using the Three Dimensions of Probability (Likelihood), Severity, and Level of Control

NASA Technical Reports Server (NTRS)

Watson, Clifford

2010-01-01

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the twodimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the least-well-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and threedimensional charting gives a visual confirmation of the relationship between causes and their controls

Risk Assessment Using the Three Dimensions of Probability (Likelihood), Severity, and Level of Control

NASA Technical Reports Server (NTRS)

Watson, Clifford C.

2011-01-01

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the two-dimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the least-well-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and three-dimensional charting gives a visual confirmation of the relationship between causes and their controls.

Risk Presentation Using the Three Dimensions of Likelihood, Severity, and Level of Control

NASA Technical Reports Server (NTRS)

Watson, Clifford

2010-01-01

Traditional hazard analysis techniques utilize a two-dimensional representation of the results determined by relative likelihood and severity of the residual risk. These matrices present a quick-look at the Likelihood (Y-axis) and Severity (X-axis) of the probable outcome of a hazardous event. A three-dimensional method, described herein, utilizes the traditional X and Y axes, while adding a new, third dimension, shown as the Z-axis, and referred to as the Level of Control. The elements of the Z-axis are modifications of the Hazard Elimination and Control steps (also known as the Hazard Reduction Precedence Sequence). These steps are: 1. Eliminate risk through design. 2. Substitute less risky materials for more hazardous materials. 3. Install safety devices. 4. Install caution and warning devices. 5. Develop administrative controls (to include special procedures and training.) 6. Provide protective clothing and equipment. When added to the two-dimensional models, the level of control adds a visual representation of the risk associated with the hazardous condition, creating a tall-pole for the leastwell-controlled failure while establishing the relative likelihood and severity of all causes and effects for an identified hazard. Computer modeling of the analytical results, using spreadsheets and three-dimensional charting gives a visual confirmation of the relationship between causes and their controls.

From leaves to landscape: A multiscale approach to assess fire hazard in wildland-urban interface areas.

PubMed

Ghermandi, Luciana; Beletzky, Natacha A; de Torres Curth, Mónica I; Oddi, Facundo J

2016-12-01

The overlapping zone between urbanization and wildland vegetation, known as the wildland urban interface (WUI), is often at high risk of wildfire. Human activities increase the likelihood of wildfires, which can have disastrous consequences for property and land use, and can pose a serious threat to lives. Fire hazard assessments depend strongly on the spatial scale of analysis. We assessed the fire hazard in a WUI area of a Patagonian city by working at three scales: landscape, community and species. Fire is a complex phenomenon, so we used a large number of variables that correlate a priori with the fire hazard. Consequently, we analyzed environmental variables together with fuel load and leaf flammability variables and integrated all the information in a fire hazard map with four fire hazard categories. The Nothofagus dombeyi forest had the highest fire hazard while grasslands had the lowest. Our work highlights the vulnerability of the wildland-urban interface to fire in this region and our suggested methodology could be applied in other wildland-urban interface areas. Particularly in high hazard areas, our work could help in spatial delimitation policies, urban planning and development of plans for the protection of human lives and assets. Copyright © 2016 Elsevier Ltd. All rights reserved.

Risk assessment in infrastructure in educational institution: A study in Malaysia

NASA Astrophysics Data System (ADS)

Rasdan Ismail, Ahmad; Adilah Hamzah, Noor; Kamilah Makhtar, Nor; Azhar Mat Daud, Khairul; Zulkarnaen Khidzir, Nik; Husna Che Hassan, Nurul; Arifpin Mansor, Muhamad

2017-10-01

This particular study was conducted to assess the hazard exposure in education institution and to highlight the possible risk level available. The assessment utilised is Hazard Identification, Risk Assessment and Risk Control (HIRARC). There was a 2008’s form in order to determine the risk level of the hazard. There were over 111 of education institutions were selected around Malaysia to perform this assessment. Area chosen for each institution was office, playing field, canteen, classroom, toilet and drainage. By referring HIRARC Guideline 2008, the determination of risk rank is measure based on the formula likelihood multiply severity and the rank need to refer from risk matrix standard. There are several hazard have be found and shows the high, medium and low of risk level. The higher level of risk was discussed in the study which is hazard found in playing field and hazard in office. There several hazard that need to be control by education management to avoid increase of case accident in Education Sector, Malaysia. As conclusion, the exposure hazard among the staff and educators is high and further action and control are needed. Further study need to explore the best recommendation for control measure of the hazard exposed by education institution.

Garment selection for cleanrooms and controlled environments for spacecraft

NASA Astrophysics Data System (ADS)

Watts, Ethel J.

Strict contamination control practices are exercised throughout the lifetime of a spacecraft in order to satisfy the performance requirements of the system. Spacecraft materials are carefully selected to have low outgassing values and particulate deposition. Parts are cleaned, and the vehicle is assembled in cleanrooms and work stations having controlled environments. Specifications are examined which govern the selection of special items of clothing designed to protect spacecraft from contaminants released by personnel and by garments. Special clothing includes coveralls, footwear, and head/face covers. Garments appropriate for both hazardous (meltproof as well as flame resistant), and nonhazardous operations are described.

The Type of Payment and Working Conditions.

PubMed

Rhee, Kyung Yong; Kim, Young Sun; Cho, Yoon Ho

2015-12-01

The type of payment is one of the important factors that has an effect on the health of employees, as a basic working condition. In the conventional research field of occupational safety and health, only the physical, chemical, biological, and ergonomic factors are treated as the main hazardous factors. Managerial factors and basic working conditions such as working hours and the type of payment are neglected. This paper aimed to investigate the association of the type of payment and the exposure to the various hazardous factors as an heuristic study. The third Korean Working Conditions Survey (KWCS) by the Occupational Safety and Health Research Institute in 2011 was used for this study. Among the total sample of 50,032 economically active persons, 34,788 employees were considered for analysis. This study examined the relation between the three types of payment such as basic fixed salary and wage, piece rate, and extra payment for bad and dangerous working conditions and exposure to hazardous factors like vibration, noise, temperature, chemical contact, and working at very high speeds. Multivariate regression analysis was used to measure the effect of the type of payment on working hours exposed to hazards. The result showed that the proportion of employees with a basic fixed salary was 94.5%, the proportion with piece rates was 38.6%, and the proportion who received extra payment for hazardous working conditions was 11.7%. The piece rate was associated with exposure to working with tight deadlines and stressful jobs. This study had some limitations because KWCS was a cross-sectional survey.

77 FR 75441 - Healthy Home and Lead Hazard Control Grant Programs Data Collection; Progress Reporting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-20

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5603-N-93] Healthy Home and Lead Hazard... collection is designed to provide HUD timely information on progress of Healthy Homes Demonstration Program, Healthy Homes Technical Studies Program, Lead Base paint Hazard Control program, Lead Hazard Reduction...

Return to work after work-related stress: a randomized controlled trial of a work-focused cognitive behavioral intervention.

PubMed

Dalgaard, Vita Ligaya; Aschbacher, Kirstin; Andersen, Johan Hviid; Glasscock, David John; Willert, Morten Vejs; Carstensen, Ole; Biering, Karin

2017-09-01

Objectives This study aimed to evaluate the effect of a stress management intervention (SMI) on lasting return to work (RTW) among patients with work-related stress complaints. Methods Sickness benefit departments from three local municipalities referred patients on sick leave with work-related adjustment disorders or mild depression to the Department of Occupational Medicine, Regional Hospital West Jutland. A 2× randomization procedure allocated patients into one of three groups: intervention (N=58), control A (which received a clinical assessment; N=56), or control B (no assessment; N=49). Treatment comprised individual work-focused cognitive behavioral therapy (CBT) with an optional workplace intervention. The outcome was time until lasting RTW (16 and 44 weeks follow-up) using register data. Results Median number of weeks until lasting RTW was 15, 19, and 32 for the intervention group, control A, and control B respectively. However, for group B, clinical assessment was not part of the inclusion process, which may have introduced selection bias. In the fully-adjusted Cox regression model, the intervention group exhibited significantly faster lasting RTW at 44 weeks; hazard ratio (HR) 1.57 [95% confidence interval (95% CI) 1.01-2.44] relative to control group A, with a non-significant trend evident at 16 weeks; HR 1.70 (95% CI 0.94-3.10), when controlling for age, gender, occupation, sick leave during previous year, full or partial sick leave, and diagnosis. Unadjusted analyses remained directionally consistent but were reduced to marginal significance. Conclusions There was a tendency towards faster lasting RTW in the intervention group compared to control A, which received clinical assessment, in all analyses. The intervention group returned to work about 4 weeks earlier than control A, which could translate into substantial financial gains.

Home safety measures and the risk of unintentional injury among young children: a multicentre case–control study

PubMed Central

LeBlanc, John C.; Pless, I. Barry; King, W. James; Bawden, Harry; Bernard-Bonnin, Anne-Claude; Klassen, Terry; Tenenbein, Milton

2006-01-01

Background Young children may sustain injuries when exposed to certain hazards in the home. To better understand the relation between several childproofing strategies and the risk of injuries to children in the home, we undertook a multicentre case–control study in which we compared hazards in the homes of children with and without injuries. Methods We conducted this case-control study using records from 5 pediatric hospital emergency departments for the 2-year period 1995–1996. The 351 case subjects were children aged 7 years and less who presented with injuries from falls, burns or scalds, ingestions or choking. The matched control subjects were children who presented during the same period with acute non-injury-related conditions. A home visitor, blinded to case-control status, assessed 19 injury hazards at the children's homes. Results Hazards found in the homes included baby walkers (21% of homes with infants), no functioning smoke alarm (17% of homes) and no fire extinguisher (51% of homes). Cases did not differ from controls in the mean proportion of home hazards. After controlling for siblings, maternal education and employment, we found that cases differed from controls for 5 hazards: the presence of a baby walker (odds ratio [OR] 9.0, 95% confidence interval [CI] 1.1–71.0), the presence of choking hazards within a child's reach (OR 2.0, 95% CI 1.0–3.7), no child-resistant lids in bathroom (OR 1.6, 95% CI 1.0–2.5), no smoke alarm (OR 3.2, 95% CI 1.4–7.7) and no functioning smoke alarm (OR 1.7, 95% CI 1.0–2.8). Interpretation Homes of children with injuries differed from those of children without injuries in the proportions of specific hazards for falls, choking, poisoning and burns, with a striking difference noted for the presence of a baby walker. In addition to counselling parents about specific hazards, clinicians should consider that the presence of some hazards may indicate an increased risk for home injuries beyond those directly related to the hazard found. Families with any home hazard may be candidates for interventions to childproof against other types of home hazards. PMID:16998079

Safety Assessment of Multi Purpose Small Payload Rack(MSPR)

NASA Astrophysics Data System (ADS)

Mizutani, Yoshinobu; Takada, Satomi; Murata, Kosei; Ozawa, Daisaku; Kobayashi, Ryoji; Nakamura, Yasuhiro

2010-09-01

We are reporting summary of preliminary safety assessment for Multi Purpose Small Payload Rack(MSPR), which is one of the micro gravity experiment facilities that are being developed for the 2nd phase JEM utilization(JEM: Japanese Experiment Module) that will be launched on H-II Transfer Vehicle(HTV) 2nd flight in 2011. MSPR is used for multi-purpose micro-g experiment providing experimental spaces and work stations. MSPR has three experimental spaces; first, there is a space called Work Volume(WV) with capacity volume of approximately 350 litters, in which multiple resources including electricity, communication, and moving image functions can be used. Within this space, installation of devices can be done by simple, prompt attachment by Velcro and pins with high degree of flexibility. Second, there is Small Experiment Area(SEA), with capacity volume of approximately 70 litters, in which electricity, communication, and moving image functions can also be used in the same way as WV. These spaces protect experiment devices and specimens from contingent loads by the crewmembers. Third, there is Work Bench with area of 0.5 square meters, on which can be used for maintenance, inspection and data operations of installed devices, etc. This bench can be stored in the rack during contingency. Chamber for Combustion Experiment(CCE) that is planned to be installed in WV is a pressure-resistant experimental container that can be used to seal hazardous materials from combustion experiments. This CCE has double sealing design in chamber itself, which resist gas leakage under normal the temperature and pressure. Electricity, communication, moving image function can be used in the same way as WV. JAXA Phase 2 Safety Review Panel(SRP) has been held in April, 2010. For safety analysis of MSPR, hazards were identified based on Fault Tree Analysis methodology and then these hazards were classified into either eight ISS standard-type hazards or eight unique-type hazards that requires special controls based on ISS common safety assessment methodology. Safety evaluation results are reported in the Safety Assessment Report(SAR) 1). Regarding structural failure, unique hazards are especially evaluated considering not only the tolerance for launch load but also load by crewmembers or orbital loads. Regarding electrical shock, electricity design up to secondary power is evaluated in unique hazard from a view point of Electrical design suitable for high voltage(32VDC or more) circuit. Regarding rupture/leakage of pressure system, hazards of fuel supply line, waste line for combustion gas, and pressure system including CCE are evaluated. Also evaluation for contamination due to hazardous gas leakage from CCE is conducted. External propagation of fire from CCE is also evaluated. In this report, we will show the overview of the result of safety assessment and future plan toward critical design phase activity.

Radiological Worker II Training, Course 20301 (Live), Course 12909 (Test)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, Jimmy D.

Radiological worker training is the basic building block for any additional radiological training you may receive. Upon completing radiological worker training, you will have the basic knowledge needed to work safely, using proper radiological practices, in areas where radiological hazards exist. You will also have a better understanding of the hazards and responsibilities associated with radiological work to help prevent the carelessness that can occur when working continually with or around radioactive material. This course does not qualify you for any specific radiological work. You may be required to take additional training at individual facilities to address facility- and job-specificmore » hazards and procedures.« less

Enhanced control & sensing for the REMOTEC ANDROS Mk VI robot. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spelt, P.F.; Harvey, H.W.

1997-08-01

This Cooperative Research and Development Agreement (CRADA) between Lockheed Marietta Energy Systems, Inc., and REMOTEC, Inc., explored methods of providing operator feedback for various work actions of the ANDROS Mk VI teleoperated robot. In a hazardous environment, an extremely heavy workload seriously degrades the productivity of teleoperated robot operators. This CRADA involved the addition of computer power to the robot along with a variety of sensors and encoders to provide information about the robot`s performance in and relationship to its environment. Software was developed to integrate the sensor and encoder information and provide control input to the robot. ANDROS Mkmore » VI robots are presently used by numerous electric utilities to perform tasks in reactors where substantial exposure to radiation exists, as well as in a variety of other hazardous environments. Further, this platform has potential for use in a number of environmental restoration tasks, such as site survey and detection of hazardous waste materials. The addition of sensors and encoders serves to make the robot easier to manage and permits tasks to be done more safely and inexpensively (due to time saved in the completion of complex remote tasks). Prior research on the automation of mobile platforms with manipulators at Oak Ridge National Laboratory`s Center for Engineering Systems Advanced Research (CESAR, B&R code KC0401030) Laboratory, a BES-supported facility, indicated that this type of enhancement is effective. This CRADA provided such enhancements to a successful working teleoperated robot for the first time. Performance of this CRADA used the CESAR laboratory facilities and expertise developed under BES funding.« less

Review of occupational hazards associated with aquaculture.

PubMed

Myers, Melvin L

2010-10-01

Aquaculture is an emerging sector that is associated with most of the same hazards that are present in agriculture generally, but many fish farming tasks entail added danger, including working around water and working at night. Comprehensive studies of these hazards have not been conducted, and substantial uncertainty exists as to the extent of these hazards. The question addressed in this investigation was, "What is known about potential hazardous occupational exposures to aquatic plant and animal farmers?" In this review, causes of death included drowning, electrocution, crushing-related injury, hydrogen sulfide poisoning, and fatal head injury. Nonfatal injuries were associated with slips, trips, and falls; machines; strains and sprains; chemicals; and fires. Risk factors included cranes (tip over and power line contact), tractors and sprayer-equipped all-terrain vehicles (overturn), heavy loads (lifting), high-pressure sprayers, slippery surfaces, rotting waste (hydrogen sulfide production), eroding levees (overturn hazard), storm-related rushing water, diving conditions (bends and drowning), nighttime conditions, working alone, lack of training, lack of or failure to use personal flotation devices, and all-terrain vehicle speeding. Other hazards included punctures or cuts from fish teeth or spines, needlesticks, exposure to low temperatures, and bacterial and parasitic infections .

Genotoxic effects of occupational exposure to benzene in gasoline station workers

PubMed Central

SALEM, Eman; EL-GARAWANI, Islam; ALLAM, Heba; EL-AAL, Bahiga Abd; HEGAZY, Mofrih

2017-01-01

Benzene, a hazardous component of gasoline, is a genotoxic class I human carcinogen. This study evaluated the genotoxic effects of occupational exposure to benzene in gasoline stations. Genotoxicity of exposure to benzene was assessed in peripheral blood leucocytes of 62 gasoline station workers and compared with an equal numbers of matched controls using total genomic DNA fragmentation, micronucleus test and cell viability test. An ambient air samples were collected and analyzed for Monitoring of benzene, toluene, ethyl benzene and xylene (BTEX) in work environment and control areas. DNA fragmentation, micronucleus and dead cells percent were significantly higher in exposed workers than controls. Level of benzene, Toluene, Ethyl benzene and xylene in the work environment were higher than the control areas and the permissible limits. Gasoline station workers occupationally exposed to benzene are susceptible to genotoxic effects indicated by increased DNA fragmentation, higher frequency of micronucleus and decreased leukocytes viability. PMID:29070767

Genotoxic effects of occupational exposure to benzene in gasoline station workers.

PubMed

Salem, Eman; El-Garawani, Islam; Allam, Heba; El-Aal, Bahiga Abd; Hegazy, Mofrih

2018-04-07

Benzene, a hazardous component of gasoline, is a genotoxic class I human carcinogen. This study evaluated the genotoxic effects of occupational exposure to benzene in gasoline stations. Genotoxicity of exposure to benzene was assessed in peripheral blood leucocytes of 62 gasoline station workers and compared with an equal numbers of matched controls using total genomic DNA fragmentation, micronucleus test and cell viability test. An ambient air samples were collected and analyzed for Monitoring of benzene, toluene, ethyl benzene and xylene (BTEX) in work environment and control areas. DNA fragmentation, micronucleus and dead cells percent were significantly higher in exposed workers than controls. Level of benzene, Toluene, Ethyl benzene and xylene in the work environment were higher than the control areas and the permissible limits. Gasoline station workers occupationally exposed to benzene are susceptible to genotoxic effects indicated by increased DNA fragmentation, higher frequency of micronucleus and decreased leukocytes viability.

Through a public health lens. Preventing violence against women: an update from the US Centers for Disease Control and Prevention.

PubMed

Graffunder, Corinne M; Noonan, Rita K; Cox, Pamela; Wheaton, Jocelyn

2004-01-01

Over the past two decades, the Centers for Disease Control and Prevention (CDC) has been a key contributor to the growing public health effort to prevent violence. Although CDC and its partners are proud of their many successes, much work remains to be done. Violence continues to be a leading cause of death worldwide for people aged 15-44. Moreover, although many forms of violence garner national concern and resources, much more violence occurs in private domains and receives less attention. These hidden health hazards silently drain our nation's human, economic, and health resources. In this paper, we highlight the current efforts of the Division of Violence Prevention (DVP), housed within CDC's National Center for Injury Prevention and Control (NCIPC), to use a public health approach to the prevention of one key hidden health hazard: violence against women (VAW). Building from a recently developed strategic plan and a research agenda, we explain how four core public health principles--emphasizing primary prevention, advancing the science of prevention, translating science into effective programs, and building on the efforts of others--drive current programmatic activities in VAW prevention. Several current programs and projects are described. Finally, we conclude with recommendations for future prevention work by deepening our vision of leadership, expanding our partnerships, pursuing comprehensive approaches, and using evidence-based strategies.

Causes Of Low Efficiency Of Combined Ventilation System In Coal Mines In Resolving The Problem Of Air Leaks (Inflows) Between Levels And Surface

NASA Astrophysics Data System (ADS)

Popov, Valeriy; Filatov, Yuriy; Lee, Hee; Golik, Anatoliy

2017-11-01

The paper discusses the problem of the underground mining safety control. The long-term air intake to coal accumulations is reviewed as one of the reasons of endogenous fires during mining. The methods of combating air leaks (inflows) in order to prevent endogenous fires are analyzed. The calculations showing the discrepancy between the design calculations for the mine ventilation, disregarding a number of mining-andgeological and mining-engineering factors, and the actual conditions of mining are given. It is proved that the conversion of operating mines to combined (pressure and exhaust) ventilation system in order to reduce the endogenous fire hazard of underground mining is unreasonable due to impossibility of providing an optimal distribution of aerodynamic pressure in mines. The conversion does not exclude the entry of air into potentially hazardous zones of endogenous fires. The essence of the combined application of positive and negative control methods for the distribution of air pressure is revealed. It consists of air doors installation in easily ventilated airways and installation of pressure equalization chambers equipped with auxiliary fans near the stoppings, working sections and in parallel airways.The effectiveness of the combined application of negative and positive control methods for the air pressure distribution in order to reduce endogenous fire hazard of mining operations is proved.

Fuels planning: science synthesis and integration; social issues fact sheet 08: The "Golden Rule" and other lessons on communicating about hazards

Treesearch

Rocky Mountain Research Station USDA Forest Service

2004-01-01

Other fact sheets identified considerations for communicating about hazards, talked about the importance of working locally, and discussed the seven laws of effective hazard communication. This fact sheet introduces the "Golden Rule" of hazard communication and shares some final lessons from hazard educators.

30 CFR 47.54 - Availability of an MSDS.

Code of Federal Regulations, 2010 CFR

2010-07-01

... make MSDSs accessible to miners during each work shift for each hazardous chemical to which they may be exposed either— (a) At each work area where the hazardous chemical is produced or used, or (b) At an...

Workplace Hazards Faced by Nursing Assistants in the United States: A Focused Literature Review

PubMed Central

Walton, AnnMarie Lee; Rogers, Bonnie

2017-01-01

Nursing assistants (NAs) make up a large share of the healthcare provider workforce and their numbers are expected to grow. NAs are predominantly women who earn a low wage and report financial, work, and family demands. Working as a NA is hazardous; this manuscript specifically examines the biological/infectious, chemical, enviromechanical, physical and psychosocial hazards that appear in the literature to date. A focused search strategy was used to review literature about hazards that fell into each of the five aforementioned domains. While some hazards that were documented were clear, such as exposure to influenza because of close contact with patients (biological/infectious), or exposure to hazardous drugs (chemical), literature was limited. The majority of the literature we reviewed fell into the domain of psychosocial hazards and centered on stress from workplace organization issues (such as mandatory overtime, lack of managerial support, and feeling rushed). More research is needed to understand which hazards NAs identify as most concerning and tailored interventions are needed for risk mitigation. PMID:28534859

Workplace Hazards Faced by Nursing Assistants in the United States: A Focused Literature Review.

PubMed

Walton, AnnMarie Lee; Rogers, Bonnie

2017-05-19

Nursing assistants (NAs) make up a large share of the healthcare provider workforce and their numbers are expected to grow. NAs are predominantly women who earn a low wage and report financial, work, and family demands. Working as a NA is hazardous; this manuscript specifically examines the biological/infectious, chemical, enviromechanical, physical and psychosocial hazards that appear in the literature to date. A focused search strategy was used to review literature about hazards that fell into each of the five aforementioned domains. While some hazards that were documented were clear, such as exposure to influenza because of close contact with patients (biological/infectious), or exposure to hazardous drugs (chemical), literature was limited. The majority of the literature we reviewed fell into the domain of psychosocial hazards and centered on stress from workplace organization issues (such as mandatory overtime, lack of managerial support, and feeling rushed). More research is needed to understand which hazards NAs identify as most concerning and tailored interventions are needed for risk mitigation.

Impact of long farm working hours on child safety practices in agricultural settings.

PubMed

Marlenga, Barbara; Pahwa, Punam; Hagel, Louise; Dosman, James; Pickett, William; Brison, Robert J; Crowe, Trever; Koehncke, Niels; Snodgrass, Phyllis; Day, Lesley; Voaklander, Donald

2010-01-01

To characterize working hours of adult farm owner-operators and their spouses by season, and to examine associations between working hours and farm safety practices affecting children. We conducted a secondary analysis of cross-sectional survey data collected as part of an existing study of injury and its determinants. Owner-operators reported a median of 60 to 70 hours of farm work per week during warm weather months, with declines in hours over the winter. Spouses reported similar seasonal patterns, although their median reported hours were much lower. Longer farm working hours by owner-operators were marginally associated with increased exposure of teenagers to farm work hazards. Exposures of young children to worksite hazards rose in association with longer farm working hours by spouses. Exposures of children to farm worksite hazards and demands may be consequences of adult long working hours. © 2010 National Rural Health Association.

The Hidden Health Toll: A Cost of Work to the American Woman

ERIC Educational Resources Information Center

Stellman, Jeanne M.

1977-01-01

Large numbers of women work at jobs that present serious health hazards, although most people associate workplace hazards with traditionally "male" jobs. Physical dangers, stress, and fatigue lead to manifold health problems among working women. These problems should be investigated and conditions improved for workers of both sexes. (Author/GC)

75 FR 8239 - School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... 0584-AD65 School Food Safety Program Based on Hazard Analysis and Critical Control Point Principles... Safety Program Based on Hazard Analysis and Critical Control Point Principles (HACCP) was published on... of Management and Budget (OMB) cleared the associated information collection requirements (ICR) on...

Environmental Health and Safety Hazards of Indigenous Small-Scale Gold Mining Using Cyanidation in the Philippines

PubMed Central

Leung, Ana Marie R.; Lu, Jinky Leilanie DP.

2016-01-01

OBJECTIVES This cross-sectional study aimed at the environmental health hazards at work and cyanide exposure of small-scale gold miners engaged in gold extraction from ores in a mining area in the Philippines. METHODS Methods consisted of structured questionnaire-guided interviews, work process observation tools, physical health assessment by medical doctors, and laboratory examination and blood cyanide determination in the blood samples of 34 indigenous small-scale gold miners from Benguet, Philippines. RESULTS The small-scale gold miners worked for a mean of 10.3 years, had a mean age of 36 years, with mean lifetime mining work hours of 18,564. All were involved in tunneling work (100%) while a considerable number were involved in mixing cyanide with the ore (44%). A considerable number were injured (35%) during the mining activity, and an alarming number (35%) had elevated blood cyanide level. The most prevalent hazard was exposure to chemicals, particularly to cyanide and nitric acid, which were usually handled with bare hands. CONCLUSION The small-scale gold miners were exposed to occupational and environmental hazards at work. PMID:27547035

Environmental Health and Safety Hazards of Indigenous Small-Scale Gold Mining Using Cyanidation in the Philippines.

PubMed

Leung, Ana Marie R; Lu, Jinky Leilanie Dp

2016-01-01

This cross-sectional study aimed at the environmental health hazards at work and cyanide exposure of small-scale gold miners engaged in gold extraction from ores in a mining area in the Philippines. Methods consisted of structured questionnaire-guided interviews, work process observation tools, physical health assessment by medical doctors, and laboratory examination and blood cyanide determination in the blood samples of 34 indigenous small-scale gold miners from Benguet, Philippines. The small-scale gold miners worked for a mean of 10.3 years, had a mean age of 36 years, with mean lifetime mining work hours of 18,564. All were involved in tunneling work (100%) while a considerable number were involved in mixing cyanide with the ore (44%). A considerable number were injured (35%) during the mining activity, and an alarming number (35%) had elevated blood cyanide level. The most prevalent hazard was exposure to chemicals, particularly to cyanide and nitric acid, which were usually handled with bare hands. The small-scale gold miners were exposed to occupational and environmental hazards at work.

Gain scheduling - Potential hazards and possible remedies

NASA Technical Reports Server (NTRS)

Shamma, Jeff S.; Athans, Michael

1991-01-01

A common gain scheduling rule-of-thumb is to schedule on a slow variable. In this work, it is shown how current gain scheduling practice is necessarily limited to slow variations in the scheduling variable. These limitations are revealed to be consequences of fundamental control concepts. Furthermore, it is shown how a formulation of the gain scheduling procedure can lead toward ultimately removing these restrictions.

Socioecological Factors Related to Hazardous Alcohol use among Female Sex Workers in Lilongwe, Malawi: A Mixed Methods Study.

PubMed

Lancaster, Kathryn E; MacLean, Sarah A; Lungu, Thandie; Mmodzi, Pearson; Hosseinipour, Mina C; Hershow, Rebecca B; Powers, Kimberly A; Pence, Brian W; Hoffman, Irving F; Miller, William C; Go, Vivian F

2018-04-16

Alcohol use is pervasive among female sex workers (FSW) placing them at increased risk of violence and sexual risk behaviors. FSW often live and work where alcohol is highly normative. To understand the socioecological influences on hazardous alcohol use among FSW in Malawi. In 2014, 200 FSW identified through venue-based sampling in Lilongwe, Malawi, completed a quantitative behavioral survey, with a sub-sample participating in qualitative interviews. Multivariable log-binomial regression was used to identify associations between hazardous alcohol use (AUDIT score ≥ 7) and time in sex work, clients per week, unprotected sex, alcohol use with clients, and living environment. Qualitative interviews enhanced findings from quantitative data and identify emergent themes around socioecological influences on alcohol use. Over 50% reported hazardous alcohol use and lived in an alcohol-serving venue. Hazardous alcohol use was associated with sex work duration of ≥2 years (aPR: 1.30; 95%CI: 1.02,1.65) and alcohol use at last sex with a client (aPR: 1.29; 95%CI: 1.06,1.57). FSW perceived alcohol as a facilitator for sex work by reducing inhibitions and attracting clients, but acknowledged alcohol leads to violence and/or unprotected sex. Despite these risks and a motivation to reduce use, FSW feared that refusing to drink would be tantamount to turning away clients. Although FSW recognized alcohol-related risks, the norms and power dynamics of sex work perpetuated hazardous alcohol use. Multilevel interventions are needed to collectively change norms around drinking and sex work that will enable FSW to reduce alcohol consumption when engaging in their work.

Manpower Needs in Environmental Engineering

ERIC Educational Resources Information Center

Middlebrooks, E. J.; And Others

1974-01-01

Outlines manpower needs in both the public and private sectors in the areas of air pollution control, solid waste management, radiological hazard control, pesticide hazard control, and water pollution control. (GS)

Control technology for integrated circuit fabrication at Micro-Circuit Engineering, Incorporated, West Palm Beach, Florida

NASA Astrophysics Data System (ADS)

Mihlan, G. I.; Mitchell, R. I.; Smith, R. K.

1984-07-01

A survey to assess control technology for integrated circuit fabrication was conducted. Engineering controls included local and general exhaust ventilation, shielding, and personal protective equipment. Devices or work stations that contained toxic materials that were potentially dangerous were controlled by local exhaust ventilation. Less hazardous areas were controlled by general exhaust ventilation. Process isolation was used in the plasma etching, low pressure chemical vapor deposition, and metallization operations. Shielding was used in ion implantation units to control X-ray emissions, in contact mask alignes to limit ultraviolet (UV) emissions, and in plasma etching units to control radiofrequency and UV emissions. Most operations were automated. Use of personal protective equipment varied by job function.

Hazards of Electromagnetic Radiation to Ordnance (HERO) Safety Test

DTIC Science & Technology

2013-01-10

Ordnance Test Procedure (JOTP)-061 Hazards of Electromagnetic Radiation to...DEPARTMENT OF DEFENSE JOINT ORDNANCE TEST PROCEDURE (JOTP)-061 HAZARDS OF ELECTROMAGNETIC RADIATION TO ORDNANCE (HERO) SAFETY...TEST Joint Services Munition Safety Test Working Group Joint Ordnance Test Procedure (JOTP)-061 Hazards of Electromagnetic Radiation

Interaction Effects of Social Isolation and Peripheral Work Position on Risk of Disability Pension: A Prospective Study of Swedish Women and Men.

PubMed

Gustafsson, Klas; Marklund, Staffan; Aronsson, Gunnar; Wikman, Anders; Floderus, Birgitta

2015-01-01

The study examines various combinations of levels of social isolation in private life and peripheral work position as predictors of disability pension (DP). A second aim was to test the potential interaction effects (above additivity) of social isolation and peripheral work position on the future risk of DP, and to provide results for men and women by age. The study was based on a sample of 45567 women and men from the Swedish population who had been interviewed between 1992 and 2007. Further information on DP and diagnoses was obtained from the Swedish Social Insurance Agency's database (1993-2011). The studied predictors were related to DP using Cox's proportional hazard regression. The analyses were stratified on sex and age (20-39 years, 40-64 years), with control for selected confounders. Increased risks of DP were found for most combinations of social isolation and peripheral work position in all strata. The hazard ratios (HRs) for joint exposure to high degree of social isolation and a peripheral work position were particularly strong among men aged 20-39 (HR 5.70; CI 95% 3.74-8.69) and women aged 20-39 (HR 4.07; CI 2.99-5.56). An interaction effect from combined exposure was found for women in both age groups as well as a tendency in the same direction among young men. However, after confounder control the effects did not reach significance. Individuals who were socially isolated and in a peripheral work position had an increased risk of future DP. The fact that an interaction effect was found among women indicates that a combination of social isolation and peripheral work position may reinforce adverse health effects. There was no evidence that a peripheral work position can be compensated by a high degree of social intergration in private life.

Joint occupational and environmental pollution prevention strategies: a model for primary prevention.

PubMed

Armenti, Karla; Moure-Eraso, Rafael; Slatin, Craig; Geiser, Ken

2003-01-01

Occupational and environmental health issues are not always considered simultaneously when attempting to reduce or eliminate hazardous materials from our environment. Methods used to decrease exposure to hazardous chemicals in the workplace often lead to increased exposure in the environment and to the community outside the workplace. Conversely, efforts to control emissions of hazardous chemicals into the environment often lead to increased exposure to the workers inside the plant. There are government regulations in place that ensure a safe work environment or a safe outside environment; however, there is little integration of both approaches when considering the public's health as a whole. This article examines some of the reasons behind this dichotomy, focusing on the regulatory and policy frameworks with respect to workplace and environment that have resulted in the inability of the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA) to coordinate their efforts to protect public health. The components of the Pollution Prevention Act and its potential to serve as a model for integrating occupational and environmental health are discussed. Limitations regarding enforcement of pollution prevention, as well as its disconnection from the work environment are equally highlighted. The article finishes by examining the barriers to integrating the occupational and environmental health paradigms and the promotion of primary prevention in public health.

The effect of work-focused rehabilitation among patients with neck and back pain: a randomized controlled trial.

PubMed

Myhre, Kjersti; Marchand, Gunn Hege; Leivseth, Gunnar; Keller, Anne; Bautz-Holter, Erik; Sandvik, Leiv; Lau, Bjørn; Røe, Cecilie

2014-11-15

Multicenter randomized trial with patients listed as sick for 1 to 12 months due to neck or back pain and referred to secondary care. To compare the return-to-work (RTW) rate among patients offered work-focused rehabilitation or multidisciplinary rehabilitation. A growing number of studies have focused on the RTW processes associated with patients with back pain. Many studies have combined a workplace focus with multidisciplinary treatments; however, this focus has not been evaluated in Norway among patients with neck and back pain thus far. A total of 405 patients who were referred to the spine clinics at 2 university hospitals in Norway were randomly assigned into work-focused and control intervention groups. The existing treatments at each hospital were used as the control interventions, which entailed either a comprehensive multidisciplinary intervention or a brief multidisciplinary intervention. The RTW rates and proportions were compared at 12 months. During the first 12 months after inclusion, 142 (70%) participants in the work-focused rehabilitation group and 152 (75%) participants in the control group returned to work. The median time to RTW was 161 days in the work-focused group and 158 days in the control group. A comparison of the work-focused and control interventions revealed a relative RTW probability (hazard ratio) of 0.94 (95% confidence interval = 0.75-1.17) after adjusting for age, sex, and education. The results suggest that a focus on the workplace in specialist care does not substantially alter the RTW rate compared with standard multidisciplinary treatments.

29 CFR 1960.41 - National committee duties.

Code of Federal Regulations, 2010 CFR

2010-07-01

... plans for abating hazards; and responses to reports of hazardous conditions; safety and health program... report of hazardous working conditions. ... Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR...

Zeolite Crystal Growth in Microgravity and on Earth

NASA Technical Reports Server (NTRS)

2003-01-01

The Center for Advanced Microgravity Materials Processing (CAMMP), a NASA-sponsored Research Partnership Center, is working to improve zeolite materials for storing hydrogen fuel. CAMMP is also applying zeolites to detergents, optical cables, gas and vapor detection for environmental monitoring and control, and chemical production techniques that significantly reduce by-products that are hazardous to the environment. Shown here are zeolite crystals (top) grown in a ground control experiment and grown in microgravity on the USML-2 mission (bottom). Zeolite experiments have also been conducted aboard the International Space Station.

Harvesting rockfall hazard evaluation parameters from Google Earth Street View

NASA Astrophysics Data System (ADS)

Partsinevelos, Panagiotis; Agioutantis, Zacharias; Tripolitsiotis, Achilles; Steiakakis, Chrysanthos; Mertikas, Stelios

2015-04-01

Rockfall incidents along highways and railways prove extremely dangerous for properties, infrastructures and human lives. Several qualitative metrics such as the Rockfall Hazard Rating System (RHRS) and the Colorado Rockfall Hazard Rating System (CRHRS) have been established to estimate rockfall potential and provide risk maps in order to control and monitor rockfall incidents. The implementation of such metrics for efficient and reliable risk modeling require accurate knowledge of multi-parametric attributes such as the geological, geotechnical, topographic parameters of the study area. The Missouri Rockfall Hazard Rating System (MORH RS) identifies the most potentially problematic areas using digital video logging for the determination of parameters like slope height and angle, face irregularities, etc. This study aims to harvest in a semi-automated approach geometric and qualitative measures through open source platforms that may provide 3-dimensional views of the areas of interest. More specifically, the Street View platform from Google Maps, is hereby used to provide essential information that can be used towards 3-dimensional reconstruction of slopes along highways. The potential of image capturing along a programmable virtual route to provide the input data for photogrammetric processing is also evaluated. Moreover, qualitative characterization of the geological and geotechnical status, based on the Street View images, is performed. These attributes are then integrated to deliver a GIS-based rockfall hazard map. The 3-dimensional models are compared to actual photogrammetric measures in a rockfall prone area in Crete, Greece while in-situ geotechnical characterization is also used to compare and validate the hazard risk. This work is considered as the first step towards the exploitation of open source platforms to improve road safety and the development of an operational system where authorized agencies (i.e., civil protection) will be able to acquire near-real time hazard maps based on video images retrieved either by open source platforms, operational unmanned aerial vehicles, and/or simple video recordings from users. This work has been performed under the framework of the "Cooperation 2011" project ISTRIA (11_SYN_9_13989) funded from the Operational Program "Competitiveness and Entrepreneurship" (co-funded by the European Regional Development Fund (ERDF)) and managed by the Greek General Secretariat for Research and Technology.

75 FR 45149 - Announcement of Funding Awards for Healthy Homes and Lead Hazard Control Grant Programs for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

... announced in a Federal Register notice published on May 22, 2009 for Lead Based Paint Hazard Control and... for the Lead Based Paint Hazard Control Grant Program under the Consolidated Appropriations Act, 2009... Tahoe, 1901 Airport Road, Suite 107, South Lake Tahoe, CA 96150, $1,500,000; State of Connecticut...

The Role of Deposition in Limiting the Hazard Extent of Dense-Gas Plumes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dillon, M B

2008-01-29

Accidents involving release of large (multi-ton) quantities of toxic industrial chemicals often yield far fewer fatalities and causalities than standard, widely-used assessment and emergency response models predict. While recent work has suggested that models should incorporate the protection provided by buildings, more refined health effect methodologies, and more detailed consideration of the release process; investigations into the role of deposition onto outdoor surfaces has been lacking. In this paper, we examine the conditions under which dry deposition may significantly reduce the extent of the downwind hazard zone. We provide theoretical arguments that in congested environments (e.g. suburbs, forests), deposition tomore » vertical surfaces (such as building walls) may play a significant role in reducing the hazard zone extent--particularly under low-wind, stable atmospheric conditions which are often considered to be the worst-case scenario for these types of releases. Our analysis suggests that in these urban or suburban environments, the amount of toxic chemicals lost to earth's surface is typically a small fraction of overall depositional losses. For isothermal gases such as chlorine, the degree to which the chemicals stick to (or react with) surfaces (i.e. surface resistance) is demonstrated to be a key parameter controlling hazard extent (the maximum distance from the release at which hazards to human health are expected). This analysis does not consider the depositional effects associated with particulate matter or gases that undergo significant thermal change in the atmosphere. While no controlled experiments were available to validate our hypothesis, our analysis results are qualitatively consistent with the observed downwind extent of vegetation damage in two chlorine accidents.« less

Participatory health impact assessment for the development of local government regulation on hazard control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Inmuong, Uraiwan, E-mail: uraiwan@kku.ac.t; Faculty of Public Health, Khon Kaen University, Thailand 123 Mittrapharb Road, Khon Kaen 40002; Rithmak, Panee, E-mail: panrit@kku.ac.t

The Thai Public Health Act 1992 required the Thai local governments to issue respective regulations to take control of any possible health-hazard related activities, both from commercial and noncommercial sources. Since 1999, there has been centrally decentralized of power to a new form of local government establishment, namely Sub-district Administrative Organization (SAO). The SAO is asmall-scale local governing structure while its legitimate function is for community services, including control of health impact related activities. Most elected SAO administrators and officers are new and less experience with any of public health code of practice, particularly on health-hazard control. This action researchmore » attempted to introduce and apply a participatory health impact assessment (HIA) tool for the development of SAO health-hazard control regulation. The study sites were at Ban Meang and Kok See SAOs, Khon Kaen Province, Thailand, while all intervention activities conducted during May 2005-April 2006. A set of cooperative activities between researchers and community representatives were planned and organized by; surveying and identifying place and service base locally causing local environmental health problems, organizing community participatory workshops for drafting and proposing the health-hazard control regulation, and appropriate practices for health-hazard controlling measures. This action research eventually could successfully enable the SAO administrators and officers understanding of local environmental-related health problem, as well as development of imposed health-hazard control regulation for local community.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Materials developed by NIOSH concerning video display terminals (VDTs) comprise the publication. The first section listed citations of reports developed by NIOSH concerning VDTs and possible hazards associated with their use, and contained ordering information for these publications. Types of publications included NIOSH numbered publications, hazard evaluation and technical assistance reports, contract reports, journal articles, book chapters, presentations, and miscellaneous reports. The second section of the report contained full text copies of selected references from the bibliography. These references included testimony before congressional committees, presentations and articles dealing with radiation issues, reproductive outcomes of workers using VDTs the risk ofmore » spontaneous abortion, an epidemiologic investigation of electric and magnetic fields and operator exposure, controlling glare problems in the VDT work environment, and the design of rest breaks for VDT operators.« less

Oncology pharmacy units: a safety policy for handling hazardous drugs and related waste in low- and middle-income African countries-Angolan experience.

PubMed

da Conceição, Ana Vaz; Bernardo, Dora; Lopes, Lygia Vieira; Miguel, Fernando; Bessa, Fernanda; Monteiro, Fernando; Santos, Cristina; Oliveira, Blasques; Santos, Lúcio Lara

2015-01-01

In African countries, higher rates of late-stage cancers at the time of first diagnosis are a reality. In this context, hazardous drugs (HDs), such as chemotherapy, play an important role and have immense benefits for patients' treatment. HDs should be handled under specific conditions. At least a class 5 environment primary engineering control (PEC), physically located in an appropriate buffer area, is mandatory for sterile HDs compounding, as well as administrative control, personal protective equipment, work practices and other engineering and environmental controls, in order to protect the environment, patient, and worker. The aim of this study is to describe the Angolan experience regarding the development of oncology pharmacy units and discuss international evidence-based guidelines on handling HDs and related waste. Measures to incorporate modern and economical solutions to upgrade or build adequate and safe facilities and staff training, in order to comply with international guidelines in this area, are crucial tasks for African countries of low and middle income.

Young worker safety in construction: do family ties and workgroup size affect hazard exposures and safety practices?

PubMed

Rauscher, Kimberly J; Myers, Douglas J; Runyan, Carol W; Schulman, Michael

2012-01-01

Little is known about how social aspects of the work environment influence exposures or safety practices affecting young construction workers. Our objective was to investigate whether working on a construction site with a small number of workers (≤10 vs. 11-50) or having a family-firm connection (working in a family-owned firm or one in which a family member also works) impacts hazard exposures and safety practices. Participants included 187 North Carolina construction workers 14 to 17 years old who were surveyed about their jobs. We conducted stratified analyses using cross-tabulations and chi-square statistics to measure associations between workgroup size (i.e., the total number of workers on a jobsite) and family-firm connections (yes/no) and hazard exposures (e.g., saws) and safety practices (e.g., supervision). Having a family-firm connection was associated with fewer hazard exposures and greater safety practices. Youth who worked on jobsites with a larger workgroup (11-50 workers) reported more hazards but also more safety practices. Family-firm connections, in particular, may have a protective effect for youth in construction. Even though the statistical significance of our findings on workgroup size was limited in places, the pattern of differences found suggest that further research in this area is warranted.

76 FR 35130 - Pipeline Safety: Control Room Management/Human Factors

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts...: Control Room Management/Human Factors AGENCY: Pipeline and Hazardous Materials Safety Administration... safety standards, risk assessments, and safety policies for natural gas pipelines and for hazardous...

Central US earthquake catalog for hazard maps of Memphis, Tennessee

USGS Publications Warehouse

Wheeler, R.L.; Mueller, C.S.

2001-01-01

An updated version of the catalog that was used for the current national probabilistic seismic-hazard maps would suffice for production of large-scale hazard maps of the Memphis urban area. Deaggregation maps provide guidance as to the area that a catalog for calculating Memphis hazard should cover. For the future, the Nuttli and local network catalogs could be examined for earthquakes not presently included in the catalog. Additional work on aftershock removal might reduce hazard uncertainty. Graphs of decadal and annual earthquake rates suggest completeness at and above magnitude 3 for the last three or four decades. Any additional work on completeness should consider the effects of rapid, local population changes during the Nation's westward expansion. ?? 2001 Elsevier Science B.V. All rights reserved.

Effect of Long Working Hours on Self-reported Hypertension among Middle-aged and Older Wage Workers

PubMed Central

2014-01-01

Objectives Many studies have reported an association between overwork and hypertension. However, research on the health effects of long working hours has yielded inconclusive results. The objective of this study was to identify an association between overtime work and hypertension in wage workers 45 years and over of age using prospective data. Methods Wage workers in Korea aged 45 years and over were selected for inclusion in this study from among 10,254 subjects from the Korean Longitudinal Study of Ageing. Workers with baseline hypertension and those with other major diseases were excluded. In the end, a total of 1,079 subjects were included. A Cox proportional hazards model was used to calculate hazard ratios and adjust for baseline characteristics such as sex, age, education, income, occupation, form of employment, body mass index, alcohol habit, smoking habit, regular exercise, and number of working days per week. Additional models were used to calculate hazard ratios after gender stratification. Results Among the 1,079 subjects, 85 workers were diagnosed with hypertension during 3974.2 person-months. The average number of working hours per week for all subjects was 47.68. The proportion of overtime workers was 61.0% (cutoff, 40 h per week). Compared with those working 40 h and less per week, the hazard ratio of subjects in the final model, which adjusted for all selected variables, working 41-50 h per week was 2.20 (95% confidence interval [CI], 1.19–4.06), that of subjects working 51-60 h per week was 2.40 (95% CI, 1.07–5.39), and that of subjects working 61 h and over per week was 2.87 (95% CI, 1.33–6.20). In gender stratification models, the hazard ratio of the females tended to be higher than that of the males. Conclusion As the number of working hours per week increased, the hazard ratio for diagnosis of hypertension significantly increased. This result suggests a positive association between overtime work and the risk of hypertension. PMID:25852938

Effect of Long Working Hours on Self-reported Hypertension among Middle-aged and Older Wage Workers.

PubMed

Yoo, Dong Hyun; Kang, Mo-Yeol; Paek, Domyung; Min, Bokki; Cho, Sung-Il

2014-01-01

Many studies have reported an association between overwork and hypertension. However, research on the health effects of long working hours has yielded inconclusive results. The objective of this study was to identify an association between overtime work and hypertension in wage workers 45 years and over of age using prospective data. Wage workers in Korea aged 45 years and over were selected for inclusion in this study from among 10,254 subjects from the Korean Longitudinal Study of Ageing. Workers with baseline hypertension and those with other major diseases were excluded. In the end, a total of 1,079 subjects were included. A Cox proportional hazards model was used to calculate hazard ratios and adjust for baseline characteristics such as sex, age, education, income, occupation, form of employment, body mass index, alcohol habit, smoking habit, regular exercise, and number of working days per week. Additional models were used to calculate hazard ratios after gender stratification. Among the 1,079 subjects, 85 workers were diagnosed with hypertension during 3974.2 person-months. The average number of working hours per week for all subjects was 47.68. The proportion of overtime workers was 61.0% (cutoff, 40 h per week). Compared with those working 40 h and less per week, the hazard ratio of subjects in the final model, which adjusted for all selected variables, working 41-50 h per week was 2.20 (95% confidence interval [CI], 1.19-4.06), that of subjects working 51-60 h per week was 2.40 (95% CI, 1.07-5.39), and that of subjects working 61 h and over per week was 2.87 (95% CI, 1.33-6.20). In gender stratification models, the hazard ratio of the females tended to be higher than that of the males. As the number of working hours per week increased, the hazard ratio for diagnosis of hypertension significantly increased. This result suggests a positive association between overtime work and the risk of hypertension.

Addressing Control of Hazardous Energy (COHE) Requirements in a Laser Safety Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woods, Michael; /SLAC

OSHA regulation 29CFR1910.147 specifies control of hazardous energy requirements for 'the servicing and maintenance of machines and equipment in which the unexpected energization or start up of the machines or equipment, or release of stored energy could cause injury to employees.' Class 3B and Class 4 laser beams must be considered hazardous energy sources because of the potential for serious eye injury; careful consideration is therefore needed to safely de-energize these lasers. This paper discusses and evaluates control of hazardous energy principles in this OSHA regulation, in ANSI Z136.1 ''Safe Use of Lasers,'' and in ANSI Z244.1 ''Control of Hazardousmore » Energy, Lockout/Tagout and Alternative Methods.'' Recommendations are made for updating and improving CoHE (control of hazardous energy) requirements in these standards for their applicability to safe laser operations.« less

Experiences of frontline nursing staff on workplace safety and occupational health hazards in two psychiatric hospitals in Ghana.

PubMed

Alhassan, Robert Kaba; Poku, Kwabena Adu

2018-06-06

Psychiatric hospitals need safe working environments to promote productivity at the workplace. Even though occupational health and safety is not completely new to the corporate society, its scope is largely limited to the manufacturing/processing industries which are perceived to pose greater dangers to workers than the health sector. This paper sought to explore the experiences of frontline nursing personnel on the occupational health and safety conditions in two psychiatric hospitals in Ghana. This is an exploratory cross-sectional study among 296 nurses and nurse-assistants in Accra (n = 164) and Pantang (n = 132) psychiatric hospitals using the proportional stratified random sampling technique. Multivariate Ordinary Least Squares (OLS) regression test was conducted to ascertain the determinants of staff exposure to occupational health hazards and the frequency of exposure to these occupational health hazards on daily basis. Knowledge levels on occupational health hazards was high in Accra and Pantang psychiatric hospitals (i.e. 92 and 81% respectively), but barely 44% of the 296 interviewed staff in the two hospitals said they reported their most recent exposure to an occupational health hazard to hospital management. It was found that staff who worked for more years on the ward had higher likelihood of exposure to occupational health hazards than those who worked for lesser years (p = 0.002). The category of occupational health hazards reported most were the physical health hazards. Psychosocial hazards were the least reported health hazards. Frequency of exposure to occupational health hazards on daily basis was positively associated with work schedules of staff particularly, staff on routine day schedule (Coef = 4.49, p = 0.011) and those who alternated between day and night schedules (Coef = 4.48, p = 0.010). Occupational health and safety conditions in the two hospitals were found to be generally poor. Even though majority of the staff knew about occupational health and safety, less than half of them reported exposure to workplace health hazards. Key stakeholders such as the Ministry of Health in collaboration with the Mental Health Authority should intensify efforts towards effective enforcement of existing policies on safety in healthcare institutions, particularly psychiatric hospitals where exposure to occupational health hazards is more prevalent.

Learn about the Hazardous Waste Electronic Manifest System (e-Manifest)

EPA Pesticide Factsheets

This webpage provides information on EPA's work toward developing a hazardous waste electronic manifest system. Information on the Hazardous Waste Electronic Manifest Establishment Act, progress on the project and frequent questions are available.

Preharvest food safety.

PubMed

Childers, A B; Walsh, B

1996-07-23

Preharvest food safety is essential for the protection of our food supply. The production and transport of livestock and poultry play an integral part in the safety of these food products. The goals of this safety assurance include freedom from pathogenic microorganisms, disease, and parasites, and from potentially harmful residues and physical hazards. Its functions should be based on hazard analysis and critical control points from producer to slaughter plant with emphasis on prevention of identifiable hazards rather than on removal of contaminated products. The production goal is to minimize infection and insure freedom from potentially harmful residues and physical hazards. The marketing goal is control of exposure to pathogens and stress. Both groups should have functional hazard analysis and critical control points management programs which include personnel training and certification of producers. These programs must cover production procedures, chemical usage, feeding, treatment practices, drug usage, assembly and transportation, and animal identification. Plans must use risk assessment principles, and the procedures must be defined. Other elements would include preslaughter certification, environmental protection, control of chemical hazards, live-animal drug-testing procedures, and identification of physical hazards.

[Influence of work conditions on health of working population in Rostov region].

PubMed

Piktushanskaia, T E; Bykovskaia, T Iu

2011-01-01

The authors analyzed work conditions and occupational morbidity among working population of Rostov region. Miners and agricultural workers appeared to lead in exposure to occupational hazards, but occupational morbidity among the miners is the highest, but that among the agricultural workers was proved to be the lowest. A conclusion covered necessity to improve periodic medical examination system for workers exposed to occupational hazards, including the agricultural workers.

Work Conditions and Health and Well-Being of Latina Hotel Housekeepers.

PubMed

Hsieh, Yu-Chin; Apostolopoulos, Yorghos; Sönmez, Sevil

2016-06-01

Hotel housekeepers are exposed to a plethora of disproportionately high work-induced hazards that can lead to adverse health consequences. Latina hotel housekeepers are rendered particularly vulnerable to elevated occupational hazards and resultant health strains due to their socioeconomic status, immigration status, language barriers, and lack of access to healthcare services. The findings from the 27 interviews with Latina hotel housekeepers indicated that the interviewees were exposed to physical, chemical, and social hazards in the workplace and suffered musculoskeletal injuries. In terms of psychological wellness, the time pressure of cleaning rooms quickly and work-related stress stemming from workplace mistreatment emerged as major work-related stressors. Recommendations are made for the introduction of multilevel interventions designed to prevent work-related injuries and illnesses and to promote healthier workplaces.

Examining psychosocial and physical hazards in the Ghanaian mining industry and their implications for employees' safety experience.

PubMed

Amponsah-Tawiah, Kwesi; Jain, Aditya; Leka, Stavroula; Hollis, David; Cox, Tom

2013-06-01

In addition to hazardous conditions that are prevalent in mines, there are various physical and psychosocial risk factors that can affect mine workers' safety and health. Without due diligence to mine safety, these risk factors can affect workers' safety experience, in terms of near misses, disabling injuries and accidents experienced or witnessed by workers. This study sets out to examine the effects of physical and psychosocial risk factors on workers' safety experience in a sample of Ghanaian miners. 307 participants from five mining companies responded to a cross sectional survey examining physical and psychosocial hazards and their implications for employees' safety experience. Zero-inflated Poisson regression models indicated that mining conditions, equipment, ambient conditions, support and security, and work demands and control are significant predictors of near misses, disabling injuries, and accidents experienced or witnessed by workers. The type of mine had important implications for workers' safety experience. Copyright © 2013 Elsevier Ltd and National Safety Council. All rights reserved.

Crisis communication: learning from the 1998 LPG near miss in Stockholm.

PubMed

Castenfors, K; Svedin, L

2001-12-14

The authors examine current trends in urban risks and resilience in relation to hazardous material transports in general, and crisis communication and the Stockholm liquefied petroleum gas (LPG) near miss in 1998 in particular. The article discusses how current dynamics affecting urban areas, such as the decay in terms of increased condensation and limited expansion alternatives combined with industry site contamination and transports of hazardous materials on old worn-out physical infrastructure, work together to produce high-risk factors and increase urban vulnerability in large parts of the world today. Crisis communication takes a particularly pronounced role in the article as challenges in communication and confidence maintenance under conditions of information uncertainty and limited information control are explored. The LPG near miss case illustrates a Swedish case of urban risk and the tight coupling to hazardous material transports. The case also serves as a current example of Swedish resilience and lack of preparedness in urban crises, with particular observations and lessons learned in regards to crisis communication.

Ergonomics work stations decreases the health impairment and saves electrical energy at the woodworking workshop in Bali, Indonesia.

PubMed

Sudiajeng, Lilik; Adiputra, Nyoman; Leibbrandt, Richard

2012-12-01

This research was conducted to assess the positive effect of the ergonomics work station on the health impairment and electrical energy usage at the woodworking workshop in Bali, Indonesia. Woodworking workshops are dangerous, particularly when they are used improperly. Workers are exposed to health hazards that cause health impairment and inefficiencies in their work conditions. A preliminary study at a woodworking workshop at the Bali State Polytechnic showed that the work station was not suitable to body size of the participants and caused awkward postures. In addition, there was also an inappropriate physical work environment. Both inappropriate work station and physical work environment caused participants to be less active and motivated. This paper reports on an experimental study into the effects of an ergonomic intervention at this workshop. The participants were 2 groups of male students with 10 participants in each group. The first group performed the task with the original work station as a control group, while the second group performed the task with the new work station. The study found a significant difference between groups (p < 0.05) both for the health impairment and the electrical energy usage. The ergonomics intervention on the work station decreased the working heart rate (16.7%), the total score of musculoskeletal disorders (17.3%), and the total score of psychological fatigue (21.5%). Furthermore, it also decreased the electrical energy usage (38.7%). This shows that an ergonomics intervention on work station decreased the health impairment and saved electrical energy usage. It also protected the workers from woodworking hazards and allowed participants to perform their tasks in healthy, safe, convenient and efficient work conditions.

Notification: Preliminary Research to Evaluate Hazardous Waste Passing Through Publicly Owned Treatment Works

EPA Pesticide Factsheets

March 13, 2013. The EPA's OIG plans to start preliminary research to evaluate the effectiveness of the EPA’s programs in preventing and addressing contamination of surface water from hazardous wastes passing through publicly owned treatment works.

Spill Prevention and Countermeasures Plan

DTIC Science & Technology

1984-08-01

THE DISCHARGE OF OiIL AND HAZARDOUS SUBSTANCES AT RMA. THE SPCC PLAN IDENTIFIES POTENTIAL SOURCES OF OIL AND HAZARDOUS SUBSTANCES AND THE MEASURES...Control and Countermeasure (SPCC) Plan is to prevent and control the discharge of oil and hazardous sub- stances at Rocky Mountain Arsenal (RYA). The...SPCC Plan identifies potential sources of oil and hazardous substances and the measures required to prevent an accidental discharge resulting from

Digital Semaphore: Tactical Implications of QR Code Optical Signaling for Fleet Communications

DTIC Science & Technology

2013-06-01

Emissions Control (EMCON) and Hazards of Electromagnetic Radiation to Ordnance (HERO) restrict the ability for Naval Vessels to communicate using...importance of visual communications methods is brought to light by discussing emissions control, hazards of electromagnetic radiation to ordnance , and...overview of emissions restrictions including Emissions Control (EMCON) and Hazards of Electromagnetic Radiation to Ordnance (HERO). Chapter VII is

Hazardous waste management in the Pacific basin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cirillo, R.R.; Chiu, S.; Chun, K.C.

1994-11-01

Hazardous waste control activities in Asia and the Pacific have been reviewed. The review includes China (mainland, Hong Kong, and Taiwan), Indonesia, Korea, Malaysia, Papua New Guinea, the Philippines, Singapore, and Thailand. It covers the sources of hazardous waste, the government structure for dealing with hazardous waste, and current hazardous waste control activities in each country. In addition, the hazardous waste program activities of US government agencies, US private-sector organizations, and international organizations are reviewed. The objective of these reviews is to provide a comprehensive picture of the current hazardous waste problems and the waste management approaches being used tomore » address them so that new program activities can be designed more efficiently.« less

[On vibration hazards of chipping-hammer operators in an iron foundry. Part 2. Results of the hygienic control].

PubMed

Harada, N; Matsumoto, T; Yamada, S; Kobayashi, F

1982-01-01

We previously reported that the working and health conditions of vibrating tool operators in an iron foundry were investigated in 1975 and vibration hazards were observed to occur frequently in workers operating chipping-hammers powered by compressed air. After that, we instituted medical treatment for the afflicted workers and improvement of working conditions in the foundry, and have performed annual medical examinations for four years. In this paper, the course of hygienic control and the change in the medical findings of twenty-four chipping-hammer operators are reported. 1. The following measures were taken to improve the working conditions of chipping-hammer operators and therapy for patients (Table 1): (1) The operating time of vibrating tools, including chipping-hammer, was limited to two hours per day. The casting process was improved to diminish the flashes that are the objects of chipping-hammer operation. For the purpose of reducing the vibration transmitted to the operator, a servo-arm that has a servomechanism for the chipping-hammer was developed and introduced. (2) Infrared lamps in the foundry and air curtains at the doorway were installed for keeping the chipping-hammer operating area warm. A warm room was set up in the foundry for providing warmth during rest periods and protective clothing against the cold was provided. (3) Workers who displayed health disturbances by medical examinations were treated during the cold season from November to April by periodic visits to the clinic or extended hospitalization, or transferred to job without vibration exposure, according to their stage of disease. Preventive treatment with vasodilator and bubble bath was performed in winter for the chipping-hammer operators. 2. In order to estimate the effect of these countermeasures, annual medical examinations were conducted in March 1975, March 1976, April 1977 and March 1978. Such subjective symptoms as Raynaud's phenomenon, finger numbness, finger listlessness, heavy-headedness, forgetfulness, irritability and hearing disorder showed a tendency for improvement, but other complaints did not (Tables 2-4). The improvement of Raynaud's phenomenon is considered to be due not merely to the countermeasures but also to reducing the chance of provocation and therefore the countermeasures should not be overestimated as a factor of recovery of vibration hazards. Of the functional tests, a tendency for improvement was recognized in sensory functions and peripheral circulatory functions, but not in motor functions (Tables 5, 6). However, the course of recovery was not fast and some advanced cases, especially those using chipping-hammers for more than ten years, showed less improvement after hospital treatment (Table 7, Fig. 1). This indicates the importance of hygienic control which enables vibration hazards patients to have early diagnosis and treatment. Furthermore, in order to eradicate the vibration hazards in the cast metal industry, a drastic reform of the finishing process is considered to be necessary.

Active Metamaterial Based Terahertz Polarimeter for Spectroscopic Detection of Chemical and Biological Hazards

DTIC Science & Technology

2014-04-01

13. SUPPLEMENTARY NOTES Author’s email: grace.d.metcalfe.civ@mail.mil 14. ABSTRACT Polarimetry is the analysis of the polarization state of...been virtually no polarimetry work at terahertz (THz) frequencies because, until recently, it has been difficult to create components to control the...develop the essential components such that THz polarimetry may enhance the ability to study previously unexploited spectral responses in the THz

A Review of the Safety Climate Literature as it Relates to Naval Aviation

DTIC Science & Technology

2010-03-01

mines, the opposite effect also appears to hold true. Brown , Willis and Prussia (2000) found that safety hazards directly caused accidents and...low performers (Braithwait, 1985; DeMichiei, Langton, Bullock, & Wiles , 1982). High levels of management control over work organization and task...thesis, Naval Postgraduate School, Monterey, CA. Brown , K.A., Willis, P.G., & Prussia, G.E. (2000). Predicting safe employee behaviour in the steel

Investigation of air transportation technology at Princeton University, 1991-1992

NASA Technical Reports Server (NTRS)

Stengel, Robert F.

1993-01-01

The Air Transportation Research Program at Princeton University proceeded along six avenues during the past year: (1) intelligent flight control; (2) computer-aided control system design; (3) neural networks for flight control; (4) stochastic robustness of flight control systems; (5) microburst hazards to aircraft; and (6) fundamental dynamics of atmospheric flight. This research has resulted in a number of publications, including archival papers and conference papers. An annotated bibliography of publications that appeared between June 1991 and June 1992 appears at the end of this report. The research that these papers describe was supported in whole or in part by the Joint University Program, including work that was completed prior to the reporting period.

Preparedness and Emergency Response Research Centers: Using a Public Health Systems Approach to Improve All-Hazards Preparedness and Response

PubMed Central

Leinhos, Mary; Williams-Johnson, Mildred

2014-01-01

In 2008, at the request of the Centers for Disease Control and Prevention (CDC), the Institute of Medicine (IOM) prepared a report identifying knowledge gaps in public health systems preparedness and emergency response and recommending near-term priority research areas. In accordance with the Pandemic and All-Hazards Preparedness Act mandating new public health systems research for preparedness and emergency response, CDC provided competitive awards establishing nine Preparedness and Emergency Response Research Centers (PERRCs) in accredited U.S. schools of public health. The PERRCs conducted research in four IOM-recommended priority areas: (1) enhancing the usefulness of public health preparedness and response (PHPR) training, (2) creating and maintaining sustainable preparedness and response systems, (3) improving PHPR communications, and (4) identifying evaluation criteria and metrics to improve PHPR for all hazards. The PERRCs worked closely with state and local public health, community partners, and advisory committees to produce practice-relevant research findings. PERRC research has generated more than 130 peer-reviewed publications and nearly 80 practice and policy tools and recommendations with the potential to significantly enhance our nation's PHPR to all hazards and that highlight the need for further improvements in public health systems. PMID:25355970

Landslide Hazard Probability Derived from Inherent and Dynamic Determinants

NASA Astrophysics Data System (ADS)

Strauch, Ronda; Istanbulluoglu, Erkan

2016-04-01

Landslide hazard research has typically been conducted independently from hydroclimate research. We unify these two lines of research to provide regional scale landslide hazard information for risk assessments and resource management decision-making. Our approach combines an empirical inherent landslide probability with a numerical dynamic probability, generated by combining routed recharge from the Variable Infiltration Capacity (VIC) macro-scale land surface hydrologic model with a finer resolution probabilistic slope stability model run in a Monte Carlo simulation. Landslide hazard mapping is advanced by adjusting the dynamic model of stability with an empirically-based scalar representing the inherent stability of the landscape, creating a probabilistic quantitative measure of geohazard prediction at a 30-m resolution. Climatology, soil, and topography control the dynamic nature of hillslope stability and the empirical information further improves the discriminating ability of the integrated model. This work will aid resource management decision-making in current and future landscape and climatic conditions. The approach is applied as a case study in North Cascade National Park Complex, a rugged terrain with nearly 2,700 m (9,000 ft) of vertical relief, covering 2757 sq km (1064 sq mi) in northern Washington State, U.S.A.

Occupational Health Hazards in ICU Nursing Staff

PubMed Central

Shimizu, Helena Eri; Couto, Djalma Ticiani; Merchán-Hamann, Edgar; Branco, Anadergh Barbosa

2010-01-01

This study analyzed occupational health hazards for Intensive Care Unit (ICU) nurses and nursing technicians, comparing differences in the number and types of hazards which occur at the beginning and end of their careers. A descriptive cross-sectional study was carried out with 26 nurses and 96 nursing technicians from a public hospital in the Federal District, Brazil. A Likert-type work-related symptom scale (WRSS) was used to evaluate the presence of physical, psychological, and social risks. Data were analyzed with the use of the SPSS, version 12.0, and the Kruskal-Wallis test for statistical significance and differences in occupational health hazards at the beginning and at the end of the workers' careers. As a workplace, ICUs can cause work health hazards, mostly physical, to nurses and nursing technicians due to the frequent use of physical energy and strength to provide care, while psychological and social hazards occur to a lesser degree. PMID:21994814

Night shift work and incident diabetes among U.S. black women

PubMed Central

Vimalananda, Varsha G.; Palmer, Julie R.; Gerlovin, Hanna; Wise, Lauren A.; Rosenzweig, James L.; Rosenberg, Lynn; Narváez, Edward A. Ruiz

2015-01-01

Aims To assess shift work in relation to incident type 2 diabetes among African American women. Methods In the Black Women's Health Study (BWHS), an ongoing prospective cohort study, we followed 28,041 participants for incident diabetes during 2005-2013. They answered questions in 2005 about having worked the night shift. We estimated hazard ratios (HR) and 95% confidence intervals (CI) for incident diabetes using Cox proportional hazards models. The basic multivariable model included age, time period, family history of diabetes, education, and neighborhood SES. In further models, we controlled for lifestyle factors and body mass index (BMI). Results Over the 8 years of follow-up, there were 1,786 incident diabetes cases. Relative to never having worked the night shift, HRs (95% CI) of diabetes were 1.17 (1.04, 1.31) for 1-2 years of night shift work, 1.23 (1.06, 1.41) for 3-9 years, and 1.42 (1.19, 1.70) for ≥ 10 years (P-trend < 0.0001). The monotonic positive association between night shift work and type 2 diabetes remained after multivariable adjustment (P-trend = 0.02). The association did not vary by obesity status, but was stronger in women aged < 50 years. Conclusions Long durations of shift work were associated with an increased risk of type 2 diabetes. The association was only partially explained by lifestyle factors and BMI. A better understanding of the mechanisms by which shift work may affect risk of diabetes is needed in view of the high prevalence of shift work among U.S. workers. PMID:25586362

The Hazard Analysis and Critical Control Points (HACCP) generic model for the production of Thai fermented pork sausage (Nham).

PubMed

Paukatong, K V; Kunawasen, S

2001-01-01

Nham is a traditional Thai fermented pork sausage. The major ingredients of Nham are ground pork meat and shredded pork rind. Nham has been reported to be contaminated with Salmonella spp., Staphylococcus aureus, and Listeria monocytogenes. Therefore, it is a potential cause of foodborne diseases for consumers. A Hazard Analysis and Critical Control Points (HACCP) generic model has been developed for the Nham process. Nham processing plants were observed and a generic flow diagram of Nham processes was constructed. Hazard analysis was then conducted. Other than microbial hazards, the pathogens previously found in Nham, sodium nitrite and metal were identified as chemical and physical hazards in this product, respectively. Four steps in the Nham process have been identified as critical control points. These steps are the weighing of the nitrite compound, stuffing, fermentation, and labeling. The chemical hazard of nitrite must be controlled during the weighing step. The critical limit of nitrite levels in the Nham mixture has been set at 100-200 ppm. This level is high enough to control Clostridium botulinum but does not cause chemical hazards to the consumer. The physical hazard from metal clips could be prevented by visual inspection of every Nham product during stuffing. The microbiological hazard in Nham could be reduced in the fermentation process. The critical limit of the pH of Nham was set at lower than 4.6. Since this product is not cooked during processing, finally, educating the consumer, by providing information on the label such as "safe if cooked before consumption", could be an alternative way to prevent the microbiological hazards of this product.

Advancing Well-Being Through Total Worker Health®.

PubMed

Schill, Anita L

2017-04-01

Total Worker Health® (TWH) is a paradigm-shifting approach to safety, health, and well-being in the workplace. It is defined as policies, programs, and practices that integrate protection from work-related safety and health hazards with promotion of injury and illness prevention efforts to advance worker well-being. The most current TWH concepts are presented, including a description of issues relevant to TWH and introduction of a hierarchy of controls applied to TWH. Total Worker Health advocates for a foundation of safety and health through which work can contribute to higher levels of well-being.

Electromagnetic Compatibility for the Space Shuttle

NASA Technical Reports Server (NTRS)

Scully, Robert C.

2004-01-01

This slide presentation reviews the Space Shuttle electromagnetic compatibility (EMC). It includes an overview of the design of the shuttle with the areas that are of concern for the electromagnetic compatibility. It includes discussion of classical electromagnetic interference (EMI) and the work performed to control the electromagnetic interference. Another area of interest is electrostatic charging and the threat of electrostatic discharge and the attempts to reduce damage to the Shuttle from these possible hazards. The issue of electrical bonding is als reviewed. Lastly the presentation reviews the work performed to protect the shuttle from lightning, both in flight and on the ground.

Lean six sigma methodologies improve clinical laboratory efficiency and reduce turnaround times.

PubMed

Inal, Tamer C; Goruroglu Ozturk, Ozlem; Kibar, Filiz; Cetiner, Salih; Matyar, Selcuk; Daglioglu, Gulcin; Yaman, Akgun

2018-01-01

Organizing work flow is a major task of laboratory management. Recently, clinical laboratories have started to adopt methodologies such as Lean Six Sigma and some successful implementations have been reported. This study used Lean Six Sigma to simplify the laboratory work process and decrease the turnaround time by eliminating non-value-adding steps. The five-stage Six Sigma system known as define, measure, analyze, improve, and control (DMAIC) is used to identify and solve problems. The laboratory turnaround time for individual tests, total delay time in the sample reception area, and percentage of steps involving risks of medical errors and biological hazards in the overall process are measured. The pre-analytical process in the reception area was improved by eliminating 3 h and 22.5 min of non-value-adding work. Turnaround time also improved for stat samples from 68 to 59 min after applying Lean. Steps prone to medical errors and posing potential biological hazards to receptionists were reduced from 30% to 3%. Successful implementation of Lean Six Sigma significantly improved all of the selected performance metrics. This quality-improvement methodology has the potential to significantly improve clinical laboratories. © 2017 Wiley Periodicals, Inc.

EVA Hazards due to TPS Inspection and Repair

NASA Technical Reports Server (NTRS)

Stewart, Christine E.

2007-01-01

Tile inspection and repair activities have implicit hazards associated with them. When an Extra Vehicular Activities (EVA) crewmember and associated hardware are added into the equation, additional hazards are introduced. Potential hazards to the Extravehicular Mobility Unit (EMU), the Orbiter or the crew member themselves are created. In order to accurately assess the risk of performing a TPS inspection or repair, an accurate evaluation of potential hazards and how adequately these hazards are controlled is essential. The EMU could become damaged due to sharp edges, protrusions, thermal extremes, molten metal or impact with the Orbiter. Tools, tethers and the presence of a crew member in the vicinity of the Orbiter Thermal Protection System (TPS) pose hazards to the Orbiter. Hazards such as additional tile or Reinforced Carbon-Carbon (RCC) damage from a loose tool, safety tethers, crewmember or arm impact are introduced. Additionally, there are hazards to the crew which should be addressed. Crew hazards include laser injury, electrical shock, inability to return to the airlock for EMU failures or Orbiter rapid safing scenarios, as well as the potential inadvertent release of a crew member from the arm/boom. The aforementioned hazards are controlled in various ways. Generally, these controls are addressed operationally versus by design, as the majority of the interfaces are to the Orbiter and the Orbiter design did not originally account for tile repair. The Shuttle Remote Manipulator System (SRMS), for instance, was originally designed to deploy experiments, and therefore has insufficient design controls for retention of the Orbiter Boom Sensor System (OBSS). Although multiple methods to repair the Orbiter TPS exist, the majority of the hazards are applicable no matter which specific repair method is being performed. TPS Inspection performed via EVA also presents some of the same hazards. Therefore, the hazards common to all TPS inspection or repair methods will be addressed.

Smart battery controller for lithium sulfur dioxide batteries

NASA Astrophysics Data System (ADS)

Atwater, Terrill; Bard, Arnold; Testa, Bruce; Shader, William

1992-08-01

Each year, the U.S. Army purchases millions of lithium sulfur dioxide batteries for use in portable electronics equipment. Because of their superior rate capability and service life over a wide variety of conditions, lithium batteries are the power source of choice for military equipment. There is no convenient method of determining the available energy remaining in partially used lithium batteries; hence, users do not take full advantage of all the available battery energy. Currently, users replace batteries before each mission, which leads to premature disposal, and results in the waste of millions of dollars in battery energy every year. Another problem of the lithium battery is that it is necessary to ensure complete discharge of the cells when the useful life of the battery has been expended, or when a hazardous condition exists; a hazardous condition may result in one or more of the cells venting. The Electronics Technology and Devices Laboratory has developed a working prototype of a smart battery controller (SBC) that addresses these problems.

Integrated Satellite Control in REIMEI (INDEX) Satellite

NASA Astrophysics Data System (ADS)

Fukuda, Seisuke; Mizuno, Takahide; Sakai, Shin-Ichiro; Fukushima, Yousuke; Saito, Hirobumi

REIMEI/INDEX (INnovative-technology Demonstration EXperiment) is a 70kg class small satellite which the Institute of Space and Astronautical Science, Japan Exploration Agency, ISAS/JAXA, has developed for observation of auroral small-scale dynamics as well as demonstration of advanced satellite technologies. An important engineering mission of REIMEI is integrated satellite control using commercial RISC CPUs with a triple voting system in order to ensure fault-tolerance against radiation hazards. Software modules concerning every satellite function, such as attitude control, data handling, and mission applications, work cooperatively so that highly sophisticated satellite control can be performed. In this paper, after a concept of the integrated satellite control is introduced, the Integrated Controller Unit (ICU) is described in detail. Also unique topics in developing the integrated control system are shown.

An Analysis of U.S. Army Health Hazard Assessments During the Acquisition of Military Materiel

DTIC Science & Technology

2010-06-03

protective equipment (PPE) (Milz, Conrad, & Soule , 2003). Engineering controls can eliminate hazards through system design, substitution of hazardous...Milz, Conrad, & Soule , 2003). Engineering control measures can serve to 7 minimize hazards where they cannot be eliminated, with preference for...during the materiel acquisitions process, and (c) will evaluate a sample of the database for accuracy by comparing the data entries to original reports

Enhanced control and sensing for the REMOTEC ANDROS Mk VI robot. CRADA final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spelt, P.F.; Harvey, H.W.

1998-08-01

This Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Systems, Inc., and REMOTEC, Inc., explored methods of providing operator feedback for various work actions of the ANDROS Mk VI teleoperated robot. In a hazardous environment, an extremely heavy workload seriously degrades the productivity of teleoperated robot operators. This CRADA involved the addition of computer power to the robot along with a variety of sensors and encoders to provide information about the robot`s performance in and relationship to its environment. Software was developed to integrate the sensor and encoder information and provide control input to the robot. ANDROS Mkmore » VI robots are presently used by numerous electric utilities to perform tasks in reactors where substantial exposure to radiation exists, as well as in a variety of other hazardous environments. Further, this platform has potential for use in a number of environmental restoration tasks, such as site survey and detection of hazardous waste materials. The addition of sensors and encoders serves to make the robot easier to manage and permits tasks to be done more safely and inexpensively (due to time saved in the completion of complex remote tasks). Prior research on the automation of mobile platforms with manipulators at Oak Ridge National Laboratory`s Center for Engineering Systems Advanced Research (CESAR, B&R code KC0401030) Laboratory, a BES-supported facility, indicated that this type of enhancement is effective. This CRADA provided such enhancements to a successful working teleoperated robot for the first time. Performance of this CRADA used the CESAR laboratory facilities and expertise developed under BES funding.« less

Gaining power and precision by using model-based weights in the analysis of late stage cancer trials with substantial treatment switching.

PubMed

Bowden, Jack; Seaman, Shaun; Huang, Xin; White, Ian R

2016-04-30

In randomised controlled trials of treatments for late-stage cancer, it is common for control arm patients to receive the experimental treatment around the point of disease progression. This treatment switching can dilute the estimated treatment effect on overall survival and impact the assessment of a treatment's benefit on health economic evaluations. The rank-preserving structural failure time model of Robins and Tsiatis (Comm. Stat., 20:2609-2631) offers a potential solution to this problem and is typically implemented using the logrank test. However, in the presence of substantial switching, this test can have low power because the hazard ratio is not constant over time. Schoenfeld (Biometrika, 68:316-319) showed that when the hazard ratio is not constant, weighted versions of the logrank test become optimal. We present a weighted logrank test statistic for the late stage cancer trial context given the treatment switching pattern and working assumptions about the underlying hazard function in the population. Simulations suggest that the weighted approach can lead to large efficiency gains in either an intention-to-treat or a causal rank-preserving structural failure time model analysis compared with the unweighted approach. Furthermore, violation of the working assumptions used in the derivation of the weights only affects the efficiency of the estimates and does not induce bias or inflate the type I error rate. The weighted logrank test statistic should therefore be considered for use as part of a careful secondary, exploratory analysis of trial data affected by substantial treatment switching. ©2015 The Authors. Statistics inMedicine Published by John Wiley & Sons Ltd.

Rapid field-based landslide hazard assessment in response to post-earthquake emergency

NASA Astrophysics Data System (ADS)

Frattini, Paolo; Gambini, Stefano; Cancelliere, Giorgio

2016-04-01

On April 25, 2015 a Mw 7.8 earthquake occurred 80 km to the northwest of Kathmandu (Nepal). The largest aftershock, occurred on May 12, 2015, was the Mw 7.3 Nepal earthquake (SE of Zham, China), 80 km to the east of Kathmandu. . The earthquakes killed ~9000 people and severely damaged a 10,000 sqkm region in Nepal and neighboring countries. Several thousands of landslides have been triggered during the event, causing widespread damages to mountain villages and the evacuation of thousands of people. Rasuwa was one of the most damaged districts. This contribution describes landslide hazard analysis of the Saramthali, Yarsa and Bhorle VDCs (122 km2, Rasuwa district). Hazard is expressed in terms of qualitative classes (low, medium, high), through a simple matrix approach that combines frequency classes and magnitude classes. The hazard analysis is based primarily on the experience gained during a field survey conducted in September 2014. During the survey, local knowledge has been systematically exploited through interviews with local people that have experienced the earthquake and the coseismic landslides. People helped us to recognize fractures and active deformations, and allowed to reconstruct a correct chronicle of landslide events, in order to assign the landslide events to the first shock, the second shock, or the post-earthquake 2015 monsoon. The field experience was complemented with a standard analysis of the relationship between potential controlling factors and the distribution of landslides reported in Kargel et al (2016). This analysis allowed recognizing the most important controlling factor. This information was integrated with the field observations to verify the mapped units and to complete the mapping in area not accessible for field activity. Finally, the work was completed with the analysis and the use of a detailed landslide inventory produced by the University of Milano Bicocca that covers most of the area affected by coseismic landslides in Nepal (Valagussa et al, 2016). As a result, a 1:10.000 hazard map was produced. About 47% of the area is classified at high hazard, almost 19 % at medium level and 34% at low risk. In addition, the hazard map reports 262 polygons of active coseismic or postseismic landslides.

Occupational medicine practice in the United States since the industrial revolution.

PubMed

Gochfeld, Michael

2005-02-01

Occupational medicine lies at the interface between work and health. Not only do workplace hazards impact health, but our state of health influences our ability to get to work, to perform work, to tolerate work, and to gain a measure of satisfaction from the work we do. Comprehensive occupational medicine requires familiarity with the work that patients do; knowledge of the workplace itself and its hazards; appreciation of the social forces that shape work; and understanding of how chemical, physical, biologic, mechanical, and psychosocial agents influence health. Many practitioners who treat injured workers or provide disability assessments have no more formal training in occupational medicine than primary care physicians in general, which limits the quality, or at least the scope, of the care they give to workers. This history has been compiled from books, journals, letters and recollections. A subset of journal issues from each decade after 1910 has been systematically reviewed, making no attempt to read through every issue. Industrial medicine as we recognize it began in the late-1800s, grew rapidly in the early and mid-1900s, and peaked toward the end of the 20th century, when American corporations began to outsource medical services, supporting the rise of free-standing industrial medicine facilities, chains of which now operate profitably throughout the country. Many of these facilities emphasize injury treatment, work hardening, and physical therapy rather than disease recognition and prevention. Occupational medicine is one of the very few medical specialties to be underserved. Board-certified specialists are relatively few, and when supply falls short of demand, the demand has tended to lower its sights. Occupational medicine has always been influenced by economics, politics, and changing patterns of employment, and today these forces include managed care, weakened unions, outsourcing and contract labor, and a generally growing political and social conservatism, not to mention multinational corporations. The globalization of manufacture and economics facilitated by rapid population growth in poor nations assures an unending supply of cheap labor, allowing limited attention to hazard control, thereby impeding progress in occupational health and safety. Some corporations are meeting the challenge of protecting their international workforce. Many, probably most, have not yet achieved this.

75 FR 60457 - Underground Injection Control Program Hazardous Waste Injection Restrictions; Petition for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-30

... ENVIRONMENTAL PROTECTION AGENCY [FRL-9208-4] Underground Injection Control Program Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection Dow Chemical Company (DOW... Petition. SUMMARY: Notice is hereby given that an exemption to the land disposal restrictions under the...

78 FR 42776 - Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... ENVIRONMENTAL PROTECTION AGENCY [FRL9834-8] Underground Injection Control Program; Hazardous Waste Injection Restrictions; Petition for Exemption--Class I Hazardous Waste Injection; Blanchard Refining... migration petition reissuance. SUMMARY: Notice is hereby given that a reissuance of an exemption to the land...

An overview of the tobacco problem in India

PubMed Central

Mishra, Gauravi A.; Pimple, Sharmila A.; Shastri, Surendra S.

2012-01-01

This is a review paper comprehensively encompassing the different aspects of tobacco control with particular reference to the Indian scenario. The information on prevalent tobacco habits in India, health hazards and environmental hazards due to tobacco use, passive smoking and its impact, economics of tobacco, legislation to control tobacco in India, the tobacco cessation services and the way ahead for effective tobacco control are discussed. Tobacco is a leading preventable cause of death, killing nearly six million people worldwide each year. Reversing this entirely preventable manmade epidemic should be our top priority. This global tobacco epidemic kills more people than tuberculosis, HIV/AIDS and malaria combined. This epidemic can be resolved by becoming aware of the devastating effects of tobacco, learning about the proven effective tobacco control measures, national programmes and legislation prevailing in the home country and then engaging completely to halt the epidemic to move toward a tobacco-free world. India is the second largest consumer of tobacco globally, and accounts for approximately one-sixth of the world's tobacco-related deaths. The tobacco problem in India is peculiar, with consumption of variety of smokeless and smoking forms. Understanding the tobacco problem in India, focusing more efforts on what works and investigating the impact of sociocultural diversity and cost-effectiveness of various modalities of tobacco control should be our priority. PMID:23248419

An overview of the tobacco problem in India.

PubMed

Mishra, Gauravi A; Pimple, Sharmila A; Shastri, Surendra S

2012-07-01

This is a review paper comprehensively encompassing the different aspects of tobacco control with particular reference to the Indian scenario. The information on prevalent tobacco habits in India, health hazards and environmental hazards due to tobacco use, passive smoking and its impact, economics of tobacco, legislation to control tobacco in India, the tobacco cessation services and the way ahead for effective tobacco control are discussed. Tobacco is a leading preventable cause of death, killing nearly six million people worldwide each year. Reversing this entirely preventable manmade epidemic should be our top priority. This global tobacco epidemic kills more people than tuberculosis, HIV/AIDS and malaria combined. This epidemic can be resolved by becoming aware of the devastating effects of tobacco, learning about the proven effective tobacco control measures, national programmes and legislation prevailing in the home country and then engaging completely to halt the epidemic to move toward a tobacco-free world. India is the second largest consumer of tobacco globally, and accounts for approximately one-sixth of the world's tobacco-related deaths. The tobacco problem in India is peculiar, with consumption of variety of smokeless and smoking forms. Understanding the tobacco problem in India, focusing more efforts on what works and investigating the impact of sociocultural diversity and cost-effectiveness of various modalities of tobacco control should be our priority.

Research notes : naturally occurring hazardous materials, natural doesn't always equal healthy.

DOT National Transportation Integrated Search

2009-05-01

The ultimate objective of this work is to assure that ODOT maintenance and construction activities take the presence of these hazardous materials into account. In this way, ODOT can protect the health of those who work on ODOT projects and the genera...

Opinion: The use of natural hazard modeling for decision making under uncertainty

Treesearch

David E. Calkin; Mike Mentis

2015-01-01

Decision making to mitigate the effects of natural hazards is a complex undertaking fraught with uncertainty. Models to describe risks associated with natural hazards have proliferated in recent years. Concurrently, there is a growing body of work focused on developing best practices for natural hazard modeling and to create structured evaluation criteria for complex...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glass, George

Pressure Safety Orientation (course #769) introduces workers at Los Alamos National Laboratory (LANL) to the Laboratory Pressure Safety Program and to pressure-related hazards. This course also affords a hands-on exercise involving the assembly of a simple pressure system. This course is required for all LANL personnel who work on or near pressure systems and are exposed to pressure-related hazards. These personnel include pressure-system engineers, designers, fabricators, installers, operators, inspectors, maintainers, and others who work with pressurized fluids and may be exposed to pressure-related hazards.

An Introduction to Hazardous Material Management.

ERIC Educational Resources Information Center

Reinhardt, Peter A.; And Others

1987-01-01

Colleges must have a system to safely control the ordering, delivery, transport, storage, and use of hazardous material. Information on hazardous material management is excerpted from "Managing Hazardous Waste at Educational Institutions. (MLW)

Prediction and perception of hazards in professional drivers: Does hazard perception skill differ between safe and less-safe fire-appliance drivers?

PubMed

Crundall, David; Kroll, Victoria

2018-05-18

Can hazard perception testing be useful for the emergency services? Previous research has found emergency response drivers' (ERDs) to perform better than controls, however these studies used clips of normal driving. In contrast, the current study filmed footage from a fire-appliance on blue-light training runs through Nottinghamshire, and endeavoured to discriminate between different groups of EDRs based on experience and collision risk. Thirty clips were selected to create two variants of the hazard perception test: a traditional push-button test requiring speeded-responses to hazards, and a prediction test that occludes at hazard onset and provides four possible outcomes for participants to choose between. Three groups of fire-appliance drivers (novices, low-risk experienced and high-risk experienced), and age-matched controls undertook both tests. The hazard perception test only discriminated between controls and all FA drivers, whereas the hazard prediction test was more sensitive, discriminating between high and low-risk experienced fire appliance drivers. Eye movement analyses suggest that the low-risk drivers were better at prioritising the hazardous precursors, leading to better predictive accuracy. These results pave the way for future assessment and training tools to supplement emergency response driver training, while supporting the growing literature that identifies hazard prediction as a more robust measure of driver safety than traditional hazard perception tests. Copyright © 2018 Elsevier Ltd. All rights reserved.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk.

PubMed

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Among 123 jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented.

Juggling work and motherhood: the impact of employment and maternity leave on breastfeeding duration: a survival analysis on Growing Up in Scotland data.

PubMed

Skafida, Valeria

2012-02-01

In 2005, Scotland became the first nation to make breastfeeding in public a legal right, but current breastfeeding targets and maternity leave allowance do not acknowledge the conflicting demands women face when juggling employment and motherhood. This paper explores how employment and maternity leave relate to breastfeeding duration among mothers in Scotland. The Growing Up in Scotland national longitudinal cohort study of 5,217 babies born in 2004-2005 was used. Multivariate proportional hazards regression models were specified using one cross-sectional wave of data to predict breastfeeding duration. Mothers working as employees, full-time (Hazard Ratio 1.6) or part-time (HR1.3), had a higher risk of earlier breastfeeding cessation than non-working mothers. However, self-employed mothers did not differ significantly from non-working mothers in their breastfeeding patterns. Mothers who took longer maternity leave breastfed for longer. The relationships between employment, maternity leave and breastfeeding duration were significant when controlling for known predictors of breastfeeding. Younger mothers, those with less formal education, single mothers, those of white ethnic background, and first-time mothers were more likely to stop breastfeeding sooner, as has been noted in previous research. Employment and early return to work are both factors associated with a shorter duration of breastfeeding. More flexible working conditions and more generous employment leave could help to prolong breastfeeding among working mothers. Current health and employment policy in Scotland and the UK could be better coordinated so that working mothers have the adequate support to meet the conflicting demands of employment and motherhood.

Pulmonary adverse effects of welding fume in automobile assembly welders.

PubMed

Sharifian, Seyed Akbar; Loukzadeh, Ziba; Shojaoddiny-Ardekani, Ahmad; Aminian, Omid

2011-01-01

Welding is one of the key components of numerous manufacturing industries, which has potential physical and chemical health hazards. Many components of welding fumes can potentially affect the lung function. This study investigates the effects of welding fumes on lung function and respiratory symptoms among welders of an automobile manufacturing plant in Iran. This historical cohort study assesses 43 male welders and 129 office workers by a questionnaire to record demographic data, smoking habits, work history and respiratory symptoms as well as lung function status by spirometry. The average pulmonary function values of welders were lower relative to controls with dose-effect relationship between work duration and pulmonary function impairment. The prevalence of chronic bronchitis was higher in welders than controls. Our findings suggest that welders are at risk for pulmonary disease.

Masters International Program in Natural Hazards: a joint program between Michigan Tech and US Peace Corps begins move to work in Indonesia

NASA Astrophysics Data System (ADS)

Rose, W. I.; Carn, S. A.; Waite, G. P.; Gierke, J. S.; Wellik, J. J.

2011-12-01

We are in the seventh year of developing a unique graduate degree program in which each student serves in the U.S. Peace Corps for two years while conducting his/her field research. Our program allows candidates to work on natural hazard mitigation projects in a country where natural hazards are important parts of life. For US students, living abroad provides a vital broadening experience and the Peace Corps emphasis on social context adds cultural understanding to their hazards work. Up until now, we have mostly worked in Central America, and 33 students have enrolled in the program. The greatest focus to date has been in Volcanic Hazards, including slope stability and debris flows, and our work is fostering long-term infrastructure-building relationships with partner agencies within the 8 countries where we have worked. This year we sent a student (Jay Wellik) to a Peace Corps site in East Java, Indonesia where he will work with schools in his village and commute weekly to the Raung Observatory Post to work with CVGHM scientists on volcano seismology and public outreach projects.. We recruit 4-6 new students each year, and we hope more will soon be in Indonesia as Peace Corps expands their new program in that country. Although the Peace Corps Masters International (PCMI) students must be US citizens, we also have regular undergraduate and graduate (MS and PhD) degree students in geology, geological engineering and geophysics who come from all over the world. We are especially interested in people from partner Peace Corps countries. Annually our natural-hazards group consists of 5 faculty, 2 post-doctoral researchers, several Ph.D and traditional M.S. students, 12 PCMI students, and roughly 20 undergraduate students. Support for our program has come from NSF and we have also benefitted from a supportive cooperation with USGS VDAP. In the past two years we have built a complementary dual degree partnership with the Université Blaise-Pascal, Clermont Ferrand (France), and Universitá degli Studi di Milano - Bicocca (Italy) , which allows for a strong European connection to this international work.

Local characteristics of cross-unit contamination around high-rise building due to wind effect: mean concentration and infection risk assessment.

PubMed

Liu, X P; Niu, J L; Kwok, K C S; Wang, J H; Li, B Z

2011-08-15

In this present work, the characteristics of hazardous gas dispersion and possible cross-unit contamination around a complex-shaped high-rise residential building due to wind effect are thoroughly studied using physical modeling method. Experiments were performed in a boundary layer wind tunnel for a 1:30 scale model that represented a 10-story residential building in prototype. Tracer gas, simulating exhausted room air, was continuously released from different floor levels, and its concentrations on the adjacent envelope surfaces were measured using fast flame ionization detectors. The mean concentration fields were reported and analyzed under different configurations during the experiment to consider the effects on pollutant dispersion behavior due to changes in source position and approaching wind condition, with the main emphasis on the differences between open-window and closed-window conditions. In particular, the measured concentration fields were further examined from a practical point of view, with respect to hazard assessment. Understanding these hazardous plume dispersion features is useful for employing effective intervention strategies in modern residential building environment in case of hazardous substance release. The study on this physical process is not only helpful to reduce the hazardous effect of routine release of harmful pollutant near the building, but also useful for the purpose of prevention and control of accidental infectious diseases outbreak. Copyright © 2011 Elsevier B.V. All rights reserved.

Effect of glaucoma on eye movement patterns and laboratory-based hazard detection ability

PubMed Central

Black, Alex A.; Wood, Joanne M.

2017-01-01

Purpose The mechanisms underlying the elevated crash rates of older drivers with glaucoma are poorly understood. A key driving skill is timely detection of hazards; however, the hazard detection ability of drivers with glaucoma has been largely unexplored. This study assessed the eye movement patterns and visual predictors of performance on a laboratory-based hazard detection task in older drivers with glaucoma. Methods Participants included 30 older drivers with glaucoma (71±7 years; average better-eye mean deviation (MD) = −3.1±3.2 dB; average worse-eye MD = −11.9±6.2 dB) and 25 age-matched controls (72±7 years). Visual acuity, contrast sensitivity, visual fields, useful field of view (UFoV; processing speeds), and motion sensitivity were assessed. Participants completed a computerised Hazard Perception Test (HPT) while their eye movements were recorded using a desk-mounted Tobii TX300 eye-tracking system. The HPT comprises a series of real-world traffic videos recorded from the driver’s perspective; participants responded to road hazards appearing in the videos, and hazard response times were determined. Results Participants with glaucoma exhibited an average of 0.42 seconds delay in hazard response time (p = 0.001), smaller saccades (p = 0.010), and delayed first fixation on hazards (p<0.001) compared to controls. Importantly, larger saccades were associated with faster hazard responses in the glaucoma group (p = 0.004), but not in the control group (p = 0.19). Across both groups, significant visual predictors of hazard response times included motion sensitivity, UFoV, and worse-eye MD (p<0.05). Conclusions Older drivers with glaucoma had delayed hazard response times compared to controls, with associated changes in eye movement patterns. The association between larger saccades and faster hazard response time in the glaucoma group may represent a compensatory behaviour to facilitate improved performance. PMID:28570621

29 CFR 1910.120 - Hazardous waste operations and emergency response.

Code of Federal Regulations, 2011 CFR

2011-07-01

... paragraph (q) of this section. (3) Definitions—Buddy system means a system of organizing employees into work... other employee in the work group. The purpose of the buddy system is to provide rapid assistance to... water-borne vessel. Hazardous materials response (HAZMAT) team means an organized group of employees...

40 CFR 63.1453 - How do I demonstrate continuous compliance with the emission limitations, work practice standards...

Code of Federal Regulations, 2011 CFR

2011-07-01

... compliance with the emission limitations, work practice standards, and operation and maintenance requirements... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Primary Copper Smelting Continuous...

40 CFR 63.1453 - How do I demonstrate continuous compliance with the emission limitations, work practice standards...

Code of Federal Regulations, 2013 CFR

2013-07-01

... compliance with the emission limitations, work practice standards, and operation and maintenance requirements... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES (CONTINUED) National Emission Standards for Hazardous Air Pollutants for Primary Copper Smelting...

[Dynamic monitoring and analysis of occupational hazards in working environment of foundry plant from 1987 to 2010].

PubMed

Lu, Yang; Zhang, Min; Chen, Wei-hong; Qi, Cheng

2013-08-01

To investigate the characteristics and changing trend of occupational hazards in the working environment of a foundry plant from 1987 to 2010. The foundry plant of a large-scale automobile company in Hubei Province, China was chosen as the study site. The data on occupational hazards in the working environment of the foundry plant in the past years were collected, and additional measurements were performed. The means and geometric means of the concentrations of occupational hazards were calculated. The characteristics and changing trend of occupational hazards from 1987 to 2010 were presented. There were dust, chemical, and physical occupational hazards in the working environment of the foundry plant, with silica dust, noise, and heat stress as the main ones. Dust, mainly silica dust, is found in all aspects of foundry. The mean concentration of silica dust was high (3.2∼8.2 mg/m(3)), exceeding the national occupational exposure limit (1 mg/m(3)). The mean concentrations of silica dust varied across different types of work, with higher levels in cast shakeout and finishing, overhead crane operation, and sand preparation. The mean concentration of respirable dust in the foundry plant was low (0.38 mg/m(3)), not exceeding the national occupational exposure limit (0.7 mg/m(3)). There were high concentrations of grinding wheel dust (10.6 mg/m(3)) and welding fume (5.7 mg/m(3)) in cast shakeout and finishing, exceeding the national occupational exposure limit (8 and 4 mg/m(3)). Coal dust was mainly found in melting as well as cast shakeout and finishing, with higher concentration in the former (4.7 mg/m(3). The main chemical occupational hazard in the environment of the foundry plant was formaldehyde (1.23 mg/m(3)), exceeding the national occupational exposure limit (0.5 mg/m(3)). The concentrations of ammonia, phenol, metal fume, sulfur dioxide, hydrogen sulfide, and phosphine in the foundry plant were low. The mean concentration of polycyclic aromatic hydrocarbons was 0.1405 µg/m(3), with a higher level in pouring. The main physical occupational hazards in the working environment of the foundry plant were noise and heat stress. Noise, mainly steady noise, was distributed in all workshops of the foundry plant, with a mean intensity of 85.1 db (A). Noise levels varied across different types of work, higher in cast shakeout and finishing (89.3 db (A)) and moulding (85.4 db (A)). Heat stress mainly existed in overhead crane operation (35.1°C), pouring (33.3°C), and melting (32.8°C). Dust, chemical, and physical occupational hazards co-existed in the working environment of the foundry plant. High concentration of dust was widely distributed in many workshops and across many types of work, but the dust concentration showed a downward trend. Chemical occupational hazards included ammonia, phenol, hydrogen sulfide, and metal fume, most at low concentrations. High-intensity noise was widely distributed in all working positions of foundry process and mainly from equipment operation, collision between parts, and gas injection. High-intensity heat stress mainly existed in overhead crane operation, pouring, and melting.

Nanomaterials, and Occupational Health and Safety—A Literature Review About Control Banding and a Semi-Quantitative Method Proposed for Hazard Assessment.

NASA Astrophysics Data System (ADS)

Dimou, Kaotar; Emond, Claude

2017-06-01

In recent decades, the control banding (CB) approach has been recognised as a hazard assessment methodology because of its increased importance in the occupational safety, health and hygiene (OSHH) industry. According to the American Industrial Hygiene Association, this approach originates from the pharmaceutical industry in the United Kingdom. The aim of the CB approach is to protect more than 90% (or approximately 2.7 billion) of the world’s workers who do not have access to OSHH professionals and traditional quantitative risk assessment methods. In other words, CB is a qualitative or semi-quantitative tool designed to prevent occupational accidents by controlling worker exposures to potentially hazardous chemicals in the absence of comprehensive toxicological and exposure data. These criteria correspond very precisely to the development and production of engineered nanomaterials (ENMs). Considering the significant lack of scientific knowledge about work-related health risks because of ENMs, CB is, in general, appropriate for these issues. Currently, CB can be adapted to the specificities of ENMs; hundreds of nanotechnology products containing ENMs are already on the market. In this context, this qualitative or semi-quantitative approach appears to be relevant for characterising and quantifying the degree of physico-chemical and biological reactivities of ENMs, leading towards better control of human health effects and the safe handling of ENMs in workplaces. The need to greater understand the CB approach is important to further manage the risks related to handling hazardous substances, such as ENMs, without established occupational exposure limits. In recent years, this topic has garnered much interest, including discussions in many technical papers. Several CB models have been developed, and many countries have created their own nano-specific CB instruments. The aims of this research were to perform a literature review about CBs, to classify the main approaches that were developed worldwide, and then to suggest an original methodology based on the characterisation of the hazard. For this research, our team conducted a systematic literature review over the past 20 years. This approach is important in understanding the conceptual basis for CB and the model’s overall effectiveness. These considerations will lead to the proposal of an original hazard assessment method based on physico-chemical and biological characteristics. Such a method should help the entire industry better understand the ability of the CB approach to limit workers’ exposure, while identifying the strengths and weaknesses of the approach. Developing this practice method will help to provide relevant recommendations to workers who handle hazardous chemicals such as ENMs and to the general population.

McVCO handbook 1999

USGS Publications Warehouse

McChesney, P.J.

1999-01-01

McVCO is a microcontroller-based frequency generator that replaces the voltage controlled oscillator (VCO) used in the analog telemetry of seismic data. It accepts low-level signals from a seismometer and produces a frequency modulated subcarrier suitable for radio or telephone links to a data collection site. McVCO was designed for the purpose of improving the analog telemetry of signals within the Pacific Northwest Seismograph Network (PNSN). Its development received support from the University of Washington Geophysics Program, and both the Volcano Hazards and Earthquake Hazards programs of the United States Geological Survey (USGS). This handbook covers operation of McVCO, provides a technical reference for those who require a closer look at how McVCO works, and covers a collection of topics that need explicit treatment or that spring from deployment of the instrument.

29 CFR 1918.90 - Hazard communication.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Hazard communication. 1918.90 Section 1918.90 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) SAFETY AND HEALTH REGULATIONS FOR LONGSHORING General Working Conditions. § 1918.90 Hazard...

Editor's Page: Management of Hazardous Wastes.

ERIC Educational Resources Information Center

Chemical and Engineering News, 1980

1980-01-01

Discussed is the problem of management of hazardous waste disposal. Included are various federal laws and congressional kills pertinent to the problem of hazardous waste disposal. Suggested is cooperation between government and the chemical industry to work for a comprehensive solution to waste disposal. (DS)

Engagement in paid work as a protective predictor of basic activities of daily living disability in Japanese urban and rural community-dwelling elderly residents: An 8-year prospective study.

PubMed

Fujiwara, Yoshinori; Shinkai, Shoji; Kobayashi, Erika; Minami, Ushio; Suzuki, Hiroyuki; Yoshida, Hideyo; Ishizaki, Tatsuro; Kumagai, Shu; Watanabe, Shuichiro; Furuna, Taketo; Suzuki, Takao

2016-01-01

To examine whether engaging in paid work is a predictor of maintaining good functional health among Japanese older adults in both urban and rural communities. We used the 8-year longitudinal Tokyo Metropolitan Institute of Gerontology Longitudinal Interdisciplinary Study on Aging with 306 and 675 persons aged 65-84 years from Koganei City (urban) and Nangai Village (rural), respectively, who are independent in basic activities of daily living (BADL). In order to examine the declining patterns in BADL and evaluate the predictive value of working status for future BADL disability, we applied the log-rank test of cumulative proportion curves and the Cox proportional hazard model by sex, controlling for age, research fields, years of education, marital state, chronic medical conditions, pain, instrumental activities of daily living (IADL), smoking status, exercise habits, life satisfaction, usual walking speed and serum albumin for evaluating the predictive value of working status at baseline for future BADL disability. In both areas, participants who were not working were more likely to decline in BADL than those working (P < 0.05), except for women in urban Koganei. Male participants who did not engage in paid work had a higher adjusted hazard ratio of onset of BADL disability, compared with those working, but this was not seen for female participants. Working might be protective from a decline in BADL only for men, but not for women. Regarding the difference of sex roles in conventional Japanese society, working would be an effective solution especially for men to participate in social activities. © 2015 Japan Geriatrics Society.

Risk of Hypertension among First-Time Symptomatic Kidney Stone Formers

PubMed Central

Kittanamongkolchai, Wonngarm; Mara, Kristin C.; Mehta, Ramila A.; Vaughan, Lisa E.; Denic, Aleksandar; Knoedler, John J.; Enders, Felicity T.; Lieske, John C.

2017-01-01

Background and objectives Prior work has suggested a higher risk of hypertension in kidney stone formers but lacked disease validation and adjustment for potential confounders. Certain types of stone formers may also be at higher risk of hypertension. Design, setting, participants, & measurements In our study, incident symptomatic stone formers in Olmsted County from 2000 to 2011 were manually validated by chart review and age and sex matched to Olmsted County controls. We followed up patients through November 20, 2015. Hypertension was also validated by manual chart review, and the risk of hypertension in stone formers compared with controls was assessed both univariately and after adjusting for comorbidities. The risk of hypertension among different subtypes of stone formers was also evaluated. Results Among 3023 coded stone formers from 2000 to 2011, a total of 1515 were validated and matched to 1515 controls (mean age was 45 years old, and 56% were men). After excluding those with baseline hypertension (20% of stone formers and 18% of controls), 154 stone formers and 110 controls developed hypertension. Median follow-up time was 7.8 years in stone formers and 9.6 years in controls. Stone formers were found to have a higher risk of hypertension compared with controls (hazard ratio, 1.50; 95% confidence interval, 1.18 to 1.92), even after adjusting for age, sex, body mass index, serum creatinine, CKD, diabetes, gout, coronary artery disease, dyslipidemia, tobacco use, and alcohol abuse (hazard ratio, 1.58; 95% confidence interval, 1.12 to 2.21). Results were similar after excluding patients who were ever on a thiazide diuretic (hazard ratio, 1.65; 95% confidence interval, 1.16 to 2.38). Stone composition, radiographic stone burden, number of subsequent stone events, and stone removal surgeries were not associated with hypertension (P>0.05 for all). Conclusions The risk of hypertension was higher after the first symptomatic kidney stone event. However, kidney stone severity, type, and treatment did not associate with hypertension. PMID:28148559

76 FR 25376 - Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-04

... describes: Standard operating procedures for using hazardous chemicals; hazard-control techniques; equipment...] Occupational Exposure to Hazardous Chemicals in Laboratories Standard; Extension of the Office of Management... collection requirements specified in the Standard on Occupational Exposure to Hazardous Chemicals in...

Reducing fire hazard: balancing costs and outcomes.

Treesearch

Valerie Rapp

2004-01-01

Massive wildfires in recent years have given urgency to questions of how to reduce fire hazard in Western forests, how to finance the work, and how to use the wood, especially in forests crowded with small trees. Scientists have already developed tools that estimate fire hazard in a forest stand. But hazard is more difficult to estimate at a landscape scale, involving...

[A survey of occupational health among polyether-exposed workers].

PubMed

Fu, Xu-ying; Yu, Bin; Zhang, Chun-ping; Zheng, Guan-hua; Bai, Lan; Zhang, Pan-pan

2013-06-01

To investigate the occupational health of the workers simultaneously exposed to acrylonitrile, epoxyethane, epoxypropane, and styrene. A questionnaire survey was conducted in 70 front-line workers simultaneously exposed to acrylonitrile, epoxyethane, epoxypropane, and styrene (exposure group) and 50 managers (control group) in a polyether manufacturer; in addition, air monitoring at workplace and occupational health examination were also performed. The obtained data were analyzed. The female workers in exposure group and the spouses of male workers in exposure group had significantly higher spontaneous abortion rates than their counterparts in control group (P < 0.01). The exposure group had a significantly higher abnormal rate of blood urea nitrogen than the control group (P < 0.01). The workers with different polyether-exposed working years had significantly higher mean levels of DNA damage than the control group (P < 0.01); the workers with not less than 5 and less than 20 polyether-exposed working years and those with not less than 20 polyether-exposed working years had significantly higher mean micronucleus rates than the control group (P < 0.01); there were no significant differences in overall chromosome aberration rate and mean level of DNA damage between each two groups of workers with different polyether-exposed working years (P > 0.05); the workers with not less than 5 and less than 20 polyether-exposed working years and workers with not less than 20 polyether-exposed working years had significantly higher mean micronucleus rates than those with less than 5 polyether-exposed working years (P < 0.01). Simultaneous exposure to acrylonitrile, epoxyethane, epoxypropane, and styrene causes occupational hazards among the workers in polyether manufacturer.

14 CFR 417.415 - Post-launch and post-flight-attempt hazard controls.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false Post-launch and post-flight-attempt hazard controls. 417.415 Section 417.415 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION... evidence; and (4) Ensuring public safety from hazardous debris, such as plans for recovery and salvage of...

Selected References on Asbestos: Its Nature, Hazards, Detection, and Control.

ERIC Educational Resources Information Center

National Education Association, Washington, DC.

This document provides teachers with sources of information about the nature, hazards, detection, and control of asbestos. Because many school buildings include asbestos-containing materials, teachers and other school personnel must be aware of the potential dangers to students and to themselves and take steps to have asbestos hazards contained or…

14 CFR 417.415 - Post-launch and post-flight-attempt hazard controls.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false Post-launch and post-flight-attempt hazard controls. 417.415 Section 417.415 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION... evidence; and (4) Ensuring public safety from hazardous debris, such as plans for recovery and salvage of...

14 CFR 417.415 - Post-launch and post-flight-attempt hazard controls.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false Post-launch and post-flight-attempt hazard controls. 417.415 Section 417.415 Aeronautics and Space COMMERCIAL SPACE TRANSPORTATION, FEDERAL AVIATION... evidence; and (4) Ensuring public safety from hazardous debris, such as plans for recovery and salvage of...

76 FR 28803 - Notice of Availability: Notice of Funding Availability (NOFA) for HUD's Fiscal Year (FY) 2011...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-18

...: Notice of Funding Availability (NOFA) for HUD's Fiscal Year (FY) 2011 Lead-Based Paint Hazard Control Grant Program and Lead Hazard Reduction Demonstration Grant Program and Amendment and Technical Corrections AGENCY: Office of Healthy Homes and Lead Hazard Control, HUD. ACTION: Notice of Availability and...

a model based on crowsourcing for detecting natural hazards

NASA Astrophysics Data System (ADS)

Duan, J.; Ma, C.; Zhang, J.; Liu, S.; Liu, J.

2015-12-01

Remote Sensing Technology provides a new method for the detecting,early warning,mitigation and relief of natural hazards. Given the suddenness and the unpredictability of the location of natural hazards as well as the actual demands for hazards work, this article proposes an evaluation model for remote sensing detecting of natural hazards based on crowdsourcing. Firstly, using crowdsourcing model and with the help of the Internet and the power of hundreds of millions of Internet users, this evaluation model provides visual interpretation of high-resolution remote sensing images of hazards area and collects massive valuable disaster data; secondly, this evaluation model adopts the strategy of dynamic voting consistency to evaluate the disaster data provided by the crowdsourcing workers; thirdly, this evaluation model pre-estimates the disaster severity with the disaster pre-evaluation model based on regional buffers; lastly, the evaluation model actuates the corresponding expert system work according to the forecast results. The idea of this model breaks the boundaries between geographic information professionals and the public, makes the public participation and the citizen science eventually be realized, and improves the accuracy and timeliness of hazards assessment results.

Gendered bodies: recruitment, management and occupational health in northern Thailand's electronics factories.

PubMed

Theobald, Sally

2002-01-01

This paper explores workers' experiences and understandings of occupational health hazards in the electronics industries of northern Thailand. Women form the bulk of the lower-level workforce as operators responsible for assembling the parts that make up microchip components. Drawing data from 16 months of research in workers' dormitories, formal and informal interviews and questionnaire surveys, in this paper I explore how gender relations are central to the organization and experience of work in these industries. I identify "work process" health hazards resulting from the physical working environment, and "workplace" health hazards relating to the organizational and social pressures of the working environment. Musculoskeletal pain, eye strain, chemical exposure, stress, improper use of safety equipment and accidents all impact upon women workers' health. Additionally, risk behaviors such as amphetamine and alcohol use, and unprotected sex, are associated with the social context of factory work.

Occupational health hazards in the interventional laboratory: time for a safer environment.

PubMed

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Haines, David; Norbash, Alexander; Mauro, Matthew A; Goldstein, James A

2009-07-01

This document is a consensus statement by the major American societies of physicians who work in the interventional laboratory environment. It reviews available data on the prevalence of occupational health risks and summarizes ongoing epidemiologic studies designed to further elucidate these risks. Its purpose is to affirm that the interventional laboratory poses workplace hazards that must be acknowledged, better understood, and mitigated to the greatest extent possible. Vigorous efforts are advocated to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward minimizing operator radiation exposure, eliminating the need for personal protective apparel, and ending the orthopedic and ergonomic consequences of the interventional laboratory work environment.

Occupational health hazards in the interventional laboratory: time for a safer environment.

PubMed

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Haines, David; Norbash, Alexander; Mauro, Matthew A; Goldstein, James A

2009-02-15

This document is a consensus statement by the major American societies of physicians who work in the interventional laboratory environment. It reviews available data on the prevalence of occupational health risks and summarizes ongoing epidemiologic studies designed to further elucidate these risks. Its purpose is to affirm that the interventional laboratory poses workplace hazards that must be acknowledged, better understood, and mitigated to the greatest extent possible. Vigorous efforts are advocated to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward minimizing operator radiation exposure, eliminating the need for personal protective apparel, and ending the orthopedic and ergonomic consequences of the interventional laboratory work environment. Copyright SIR, 2009

Occupational health hazards in the interventional laboratory: time for a safer environment.

PubMed

Klein, Lloyd W; Miller, Donald L; Balter, Stephen; Laskey, Warren; Haines, David; Norbash, Alexander; Mauro, Matthew A; Goldstein, James A

2009-02-01

This document is a consensus statement by the major American societies of physicians who work in the interventional laboratory environment. It reviews available data on the prevalence of occupational health risks and summarizes ongoing epidemiologic studies designed to further elucidate these risks. Its purpose is to affirm that the interventional laboratory poses workplace hazards that must be acknowledged, better understood, and mitigated to the greatest extent possible. Vigorous efforts are advocated to reduce these hazards. Interventional physicians and their professional societies, working together with industry, should strive toward minimizing operator radiation exposure, eliminating the need for personal protective apparel, and ending the orthopedic and ergonomic consequences of the interventional laboratory work environment.

The Occupational Cost of Being Illegal in the United States: Legal Status, Job Hazards, and Compensating Differentials1

PubMed Central

Hall, Matthew; Greenman, Emily

2014-01-01

Considerable research and pervasive cultural narratives suggest that undocumented immigrant workers are concentrated in the most dangerous, hazardous, and otherwise unappealing jobs in U.S. labor markets. Yet, owing largely to data limitations, little empirical work has addressed this topic. Using data from the 2004 and 2008 panels of the Survey of Income and Program Participation, we impute legal status for Mexican and Central American immigrants and link their occupations to BLS data on occupational fatalities and occupational hazard data from the Department of Labor to explore racial and legal status differentials on several specific measures of occupational risk. Results indicate that undocumented workers face heightened exposure to numerous dimensions of occupational hazard – including higher levels of physical strain, exposure to heights, and repetitive motions – but are less exposed than native workers to some of the potentially most dangerous environments. We also show that undocumented workers are rewarded less for employment in hazardous settings, receiving low or no compensating differential for working in jobs with high fatality, toxic materials, or exposure to heights. Overall, this study suggests that legal status plays an important role in determining exposure to job hazard and in structuring the wage returns to risky work. PMID:26190867

The Occupational Cost of Being Illegal in the United States: Legal Status, Job Hazards, and Compensating Differentials.

PubMed

Hall, Matthew; Greenman, Emily

2015-01-01

Considerable research and pervasive cultural narratives suggest that undocumented immigrant workers are concentrated in the most dangerous, hazardous, and otherwise unappealing jobs in U.S. labor markets. Yet, owing largely to data limitations, little empirical work has addressed this topic. Using data from the 2004 and 2008 panels of the Survey of Income and Program Participation, we impute legal status for Mexican and Central American immigrants and link their occupations to BLS data on occupational fatalities and occupational hazard data from the Department of Labor to explore racial and legal status differentials on several specific measures of occupational risk. Results indicate that undocumented workers face heightened exposure to numerous dimensions of occupational hazard - including higher levels of physical strain, exposure to heights, and repetitive motions - but are less exposed than native workers to some of the potentially most dangerous environments. We also show that undocumented workers are rewarded less for employment in hazardous settings, receiving low or no compensating differential for working in jobs with high fatality, toxic materials, or exposure to heights. Overall, this study suggests that legal status plays an important role in determining exposure to job hazard and in structuring the wage returns to risky work.

Technical-Information Products for a National Volcano Early Warning System

USGS Publications Warehouse

Guffanti, Marianne; Brantley, Steven R.; Cervelli, Peter F.; Nye, Christopher J.; Serafino, George N.; Siebert, Lee; Venezky, Dina Y.; Wald, Lisa

2007-01-01

Introduction Technical outreach - distinct from general-interest and K-12 educational outreach - for volcanic hazards is aimed at providing usable scientific information about potential or ongoing volcanic activity to public officials, businesses, and individuals in support of their response, preparedness, and mitigation efforts. Within the context of a National Volcano Early Warning System (NVEWS) (Ewert et al., 2005), technical outreach is a critical process, transferring the benefits of enhanced monitoring and hazards research to key constituents who have to initiate actions or make policy decisions to lessen the hazardous impact of volcanic activity. This report discusses recommendations of the Technical-Information Products Working Group convened in 2006 as part of the NVEWS planning process. The basic charge to the Working Group was to identify a web-based, volcanological 'product line' for NVEWS to meet the specific hazard-information needs of technical users. Members of the Working Group were: *Marianne Guffanti (Chair), USGS, Reston VA *Steve Brantley, USGS, Hawaiian Volcano Observatory HI *Peter Cervelli, USGS, Alaska Volcano Observatory, Anchorage AK *Chris Nye, Division of Geological and Geophysical Surveys and Alaska Volcano Observatory, Fairbanks AK *George Serafino, National Oceanic and Atmospheric Administration, Camp Springs MD *Lee Siebert, Smithsonian Institution, Washington DC *Dina Venezky, USGS, Volcano Hazards Team, Menlo Park CA *Lisa Wald, USGS, Earthquake Hazards Program, Golden CO

Hooked on a feeling: emotional labor as an occupational hazard of the post-industrial age.

PubMed

Andrews, Bonnie K; Karcz, Susan; Rosenberg, Beth

2008-01-01

Emotional labor is a subtle but serious occupational hazard that is likely to spread rapidly as the global service economy continues to grow. Emotional labor requires more than just acting friendly and being helpful to customers; the worker must manage his or her emotions to create a company-dictated experience for customers. The practice of emotional labor in an unsupportive work environment produces work-related stress, which has a wide range of potentially serious health effects. Though many employers do not acknowledge the existence of emotional labor, it is a real occupational hazard that may generate life-altering effects on physical and emotional health. While no official regulations or identification standards specify emotional labor as an occupational hazard, some guidelines exist regarding its outcome: occupational stress. Emotional labor should be recognized as an occupational hazard by the Occupational Safety and Health Administration (OSHA), but this hazard does not lend itself to regulation through standards. The business culture that demands its performance is questioned.

Chemical and biological work-related risks across occupations in Europe: a review.

PubMed

Montano, Diego

2014-01-01

Work-related health inequalities are determined to some extent by an unequal exposure to chemical and biological risk factors of disease. Although their potential economic burden in the European Union (EU-25) might be substantial, comprehensive reviews focusing on the distribution of these risks across occupational groups are limited. Thus, the main objective of this review is to provide a synopsis of the exposure to chemical and biological hazards across occupational groups. In addition, main industrial applications of hazardous substances are identified and some epidemiological evidence is discussed regarding societal costs and incidence rates of work-related diseases. Available lists of carcinogens, sensitisers, mutagens, reprotoxic substances and biological hazards were consulted. For each work-related hazard the main industrial application was identified in order to assess which ISCO occupational groups may be associated with direct exposure. Where available, information on annual tonnage production, risk assessment of the substances and pathogens, and other relevant data were collected and reported. Altogether 308 chemical and biological hazards were identified which may account to at least 693 direct exposures. These hazards concentrate on the following major occupational groups: technicians (ISCO 3), operators (ISCO 8), agricultural workers (ISCO 6) and workers in elementary occupations (ISCO 9). Common industrial applications associated with increased exposure rates relate among others to: (1) production or application of pigments, resins, cutting fluids, adhesives, pesticides and cleaning products, (2) production of rubber, plastics, textiles, pharmaceuticals and cosmetics, and (3) in agriculture, metallurgy and food processing industry, Societal costs of the unequal distribution of chemical and biological hazards across occupations depend on the corresponding work-related diseases and may range from 2900 EUR to 126000 EUR per case/year. Risk of exposure to chemical and biological risks and work-related disease incidence are highly concentrated on four occupational groups. The unequal burden of exposure across occupations is an important contributing factor leading to health inequalities in society. The bulk of societal costs, however, are actually being borne by the workers themselves. There is an urgent need of taking into account the health impact of production processes and services on workers' health.

Chemical and biological work-related risks across occupations in Europe: a review

PubMed Central

2014-01-01

Background Work-related health inequalities are determined to some extent by an unequal exposure to chemical and biological risk factors of disease. Although their potential economic burden in the European Union (EU-25) might be substantial, comprehensive reviews focusing on the distribution of these risks across occupational groups are limited. Thus, the main objective of this review is to provide a synopsis of the exposure to chemical and biological hazards across occupational groups. In addition, main industrial applications of hazardous substances are identified and some epidemiological evidence is discussed regarding societal costs and incidence rates of work-related diseases. Methods Available lists of carcinogens, sensitisers, mutagens, reprotoxic substances and biological hazards were consulted. For each work-related hazard the main industrial application was identified in order to assess which ISCO occupational groups may be associated with direct exposure. Where available, information on annual tonnage production, risk assessment of the substances and pathogens, and other relevant data were collected and reported. Results Altogether 308 chemical and biological hazards were identified which may account to at least 693 direct exposures. These hazards concentrate on the following major occupational groups: technicians (ISCO 3), operators (ISCO 8), agricultural workers (ISCO 6) and workers in elementary occupations (ISCO 9). Common industrial applications associated with increased exposure rates relate among others to: (1) production or application of pigments, resins, cutting fluids, adhesives, pesticides and cleaning products, (2) production of rubber, plastics, textiles, pharmaceuticals and cosmetics, and (3) in agriculture, metallurgy and food processing industry, Societal costs of the unequal distribution of chemical and biological hazards across occupations depend on the corresponding work-related diseases and may range from 2900 EUR to 126000 EUR per case/year. Conclusions Risk of exposure to chemical and biological risks and work-related disease incidence are highly concentrated on four occupational groups. The unequal burden of exposure across occupations is an important contributing factor leading to health inequalities in society. The bulk of societal costs, however, are actually being borne by the workers themselves. There is an urgent need of taking into account the health impact of production processes and services on workers’ health. PMID:25071862

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk

PubMed Central

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

Objectives This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Methods Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Results Among 123jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Conclusion Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented. PMID:24142048

Monitoring psychosocial stress at work: development of the Psychosocial Working Conditions Questionnaire.

PubMed

Widerszal-Bazyl, M; Cieślak, R

2000-01-01

Many studies on the impact of psychosocial working conditions on health prove that psychosocial stress at work is an important risk factor endangering workers' health. Thus it should be constantly monitored like other work hazards. The paper presents a newly developed instrument for stress monitoring called the Psychosocial Working Conditions Questionnaire (PWC). Its structure is based on Robert Karasek's model of job stress (Karasek, 1979; Karasek & Theorell, 1990). It consists of 3 main scales Job Demands, Job Control, Social Support and 2 additional scales adapted from the Occupational Stress Questionnaire (Elo, Leppanen, Lindstrom, & Ropponen, 1992), Well-Being and Desired Changes. The study of 8 occupational groups (bank and insurance specialists, middle medical personnel, construction workers, shop assistants, government and self-government administration officers, computer scientists, public transport drivers, teachers, N = 3,669) indicates that PWC has satisfactory psychometrics parameters. Norms for the 8 groups were developed.

The effect of long working hours on cerebrovascular and cardiovascular disease; A case-crossover study.

PubMed

Shin, Kyong-Sok; Chung, Yun Kyung; Kwon, Young-Jun; Son, Jun-Seok; Lee, Se-Hoon

2017-09-01

This study investigated the relationship between weekly working hours and the occurrence of cerebro-cardiovascular diseases using a case-crossover study design. We investigated average working hours during the 7 days before the onset of illness (hazard period) and average weekly working hours between 8 days and 3 months before the onset of cerebro-cardiovascular diseases (control period) for 1,042 cases from the workers' compensation database for 2009. Among all subjects, the odds ratio by conditional logistic regression for the risk of cerebro-cardiovascular diseases with a 10 hr increase in average weekly working hours was 1.45 (95% confidence interval [CI]: 1.22-1.72), a significant association. An increase in average weekly working hours may trigger the onset of cerebro-cardiovascular disease. Am. J. Ind. Med. 60:753-761, 2017. © 2017. Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Job stress and mortality in older age.

PubMed

Tobiasz-Adamczyk, Beata; Brzyski, Piotr; Florek, Marzena; Brzyska, Monika

2013-06-01

This paper aims to assess the relationship between the determinants of the psychosocial work environment, as expressed in terms of JDC or ERI models, and all-cause mortality in older individuals. The baseline study was conducted on a cohort comprising a random sample of 65-year-old community-dwelling citizens of Kraków, Poland. All of the 727 participants (410 women, 317 men) were interviewed in their households in the period between 2001 and 2003; a structured questionnaire was used regarding their occupational activity history, which included indexes measuring particular dimensions of their psychosocial work environment based on Karasek's Job Demand-Control model and Siegrist's Effort-Reward Imbalance model, as well as health-related quality of life and demographic data. Mortality was ascertained by monitoring City Vital Records for 7 years. Analyses were conducted separately for men and women, with the multivariate Cox proportional hazard model. During a 7-year follow-up period, 59 participants (8.1%) died, including 21 women (5.1% of total women) and 38 men (12%) (p < 0.05). Significant differences in the number of deaths occurred regarding disproportion between physical demands and control in men: those with low physical demands and low control died three times more often than those with high control, regardless of the level of demands. The multivariate Cox proportional hazard model showed that significantly higher risk of death was observed only in men with low physical demands and low control, compared to those with low physical demands and high control (Exp(B) = 4.65, 95% CI: 1.64-13.2). Observed differences in mortality patterns are similar to the patterns of relationships observed in health-related quality of life (HRQoL) level at the beginning of old age; however, the relationship between efforts and rewards or demands and control and mortality was not fully confirmed.

Safety in the wood products industry

Treesearch

Judd H. Michael; Janice K. Wiedenbeck; Janice K. Wiedenbeck

2004-01-01

The wood products industry has historically been considered to be one of the most dangerous for manufacturing employees. Workers are exposed to hazards ranging from falling trees to debarkers to saws to nail guns, while often working under pressures for high productivity. Compounding the danger from these hazards are the mentally and physically challenging working...

Effort-Reward Imbalance at Work and Incident Coronary Heart Disease: A Multicohort Study of 90,164 Individuals.

PubMed

Dragano, Nico; Siegrist, Johannes; Nyberg, Solja T; Lunau, Thorsten; Fransson, Eleonor I; Alfredsson, Lars; Bjorner, Jakob B; Borritz, Marianne; Burr, Hermann; Erbel, Raimund; Fahlén, Göran; Goldberg, Marcel; Hamer, Mark; Heikkilä, Katriina; Jöckel, Karl-Heinz; Knutsson, Anders; Madsen, Ida E H; Nielsen, Martin L; Nordin, Maria; Oksanen, Tuula; Pejtersen, Jan H; Pentti, Jaana; Rugulies, Reiner; Salo, Paula; Schupp, Jürgen; Singh-Manoux, Archana; Steptoe, Andrew; Theorell, Töres; Vahtera, Jussi; Westerholm, Peter J M; Westerlund, Hugo; Virtanen, Marianna; Zins, Marie; Batty, G David; Kivimäki, Mika

2017-07-01

Epidemiologic evidence for work stress as a risk factor for coronary heart disease is mostly based on a single measure of stressful work known as job strain, a combination of high demands and low job control. We examined whether a complementary stress measure that assesses an imbalance between efforts spent at work and rewards received predicted coronary heart disease. This multicohort study (the "IPD-Work" consortium) was based on harmonized individual-level data from 11 European prospective cohort studies. Stressful work in 90,164 men and women without coronary heart disease at baseline was assessed by validated effort-reward imbalance and job strain questionnaires. We defined incident coronary heart disease as the first nonfatal myocardial infarction or coronary death. Study-specific estimates were pooled by random effects meta-analysis. At baseline, 31.7% of study members reported effort-reward imbalance at work and 15.9% reported job strain. During a mean follow-up of 9.8 years, 1,078 coronary events were recorded. After adjustment for potential confounders, a hazard ratio of 1.16 (95% confidence interval, 1.00-1.35) was observed for effort-reward imbalance compared with no imbalance. The hazard ratio was 1.16 (1.01-1.34) for having either effort-reward imbalance or job strain and 1.41 (1.12-1.76) for having both these stressors compared to having neither effort-reward imbalance nor job strain. Individuals with effort-reward imbalance at work have an increased risk of coronary heart disease, and this appears to be independent of job strain experienced. These findings support expanding focus beyond just job strain in future research on work stress.

OSHA standard for medical surveillance of hazardous waste workers.

PubMed

Melius, J M

1990-01-01

The increasing amount of work involving hazardous waste sites and the heavy involvement of the federal and state governments in this work have led to the gradual development of guidelines and standards providing for occupational safety and health programs for these sites. On March 6, 1989, the Occupational Safety and Health Administration published its final rule governing occupational safety and health matters at hazardous waste sites and emergency operations. This rule is currently scheduled to take effect on March 6, 1990. This chapter will briefly describe this regulation, particularly its medical surveillance requirements.

A risk perception gap? Comparing expert, producer and consumer prioritization of food hazard controls.

PubMed

Hartmann, Christina; Hübner, Philipp; Siegrist, Michael

2018-06-01

Using a survey approach, the study examined how experts (i.e. food control representatives), producers (i.e. food industry representatives) and consumers prioritized control activities for 28 hazards related to food and other everyday items. The investigated hazards encompassed a wide range of safety issues, including health risks, consumer deception and poor food hygiene behaviour. The participants included 41 experts, 138 producers and 243 consumers from the German- and French-speaking parts of Switzerland. Based on detailed descriptions of the hazards, they were asked to rank these on a score sheet in terms of the perceived importance of monitoring by food control authorities. A between-group comparison of average rankings showed that consumers and experts differed significantly in relation to 17 of the 28 hazards. While the experts assigned higher priority to hazards related to everyday items such as nitrosamine in mascara and chromium VI in leather products, producers and consumers tended to prioritize products related to plant treatment and genetic modification of food and feeds. Producer and consumer rankings of the hazards were highly correlated (r = .96, p < .001). Rankings were also similar among participants from the two cultural regions (i.e. German and French-speaking parts of Switzerland). Copyright © 2018 Elsevier Ltd. All rights reserved.

Safety and Hazard Analysis for the Coherent/Acculite Laser Based Sandia Remote Sensing System (Trailer B70).

DOE Office of Scientific and Technical Information (OSTI.GOV)

Augustoni, Arnold L.

A laser safety and hazard analysis is presented, for the Coherent(r) driven Acculite(r) laser central to the Sandia Remote Sensing System (SRSS). The analysis is based on the 2000 version of the American National Standards Institute's (ANSI) Standard Z136.1, for Safe Use of Lasers and the 2000 version of the ANSI Standard Z136.6, for Safe Use of Lasers Outdoors. The trailer (B70) based SRSS laser system is a mobile platform which is used to perform laser interaction experiments and tests at various national test sites. The trailer based SRSS laser system is generally operated on the United State Air Forcemore » Starfire Optical Range (SOR) at Kirtland Air Force Base (KAFB), New Mexico. The laser is used to perform laser interaction testing inside the laser trailer as well as outside the trailer at target sites located at various distances. In order to protect personnel who work inside the Nominal Hazard Zone (NHZ) from hazardous laser exposures, it was necessary to determine the Maximum Permissible Exposure (MPE) for each laser wavelength (wavelength bands) and calculate the appropriate minimum Optical Density (ODmin) necessary for the laser safety eyewear used by authorized personnel. Also, the Nominal Ocular Hazard Distance (NOHD) and The Extended Ocular Hazard Distance (EOHD) are calculated in order to protect unauthorized personnel who may have violated the boundaries of the control area and might enter into the laser's NHZ for testing outside the trailer. 4Page intentionally left blank« less

Fault tolerant vector control of induction motor drive

NASA Astrophysics Data System (ADS)

Odnokopylov, G.; Bragin, A.

2014-10-01

For electric composed of technical objects hazardous industries, such as nuclear, military, chemical, etc. an urgent task is to increase their resiliency and survivability. The construction principle of vector control system fault-tolerant asynchronous electric. Displaying recovery efficiency three-phase induction motor drive in emergency mode using two-phase vector control system. The process of formation of a simulation model of the asynchronous electric unbalance in emergency mode. When modeling used coordinate transformation, providing emergency operation electric unbalance work. The results of modeling transient phase loss motor stator. During a power failure phase induction motor cannot save circular rotating field in the air gap of the motor and ensure the restoration of its efficiency at rated torque and speed.

49 CFR 107.1 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS AND OIL TRANSPORTATION HAZARDOUS MATERIALS PROGRAM..., Pipeline and Hazardous Materials Safety Administration. Competent Authority means a national agency that is responsible, under its national law, for the control or regulation of some aspect of hazardous materials...

Best Practices for Validating Hazard Control

EPA Science Inventory

Provides information on the application of Hazard Assessment Critical Control Points analysis to manging building water quality, and information on molecular assay options for detecting pathogens in water.

ROBOTIC CRAWLER PROVIDES RADIOLOGICAL PROTECTION IN HAZARDOUS ENVIRONMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

HAM, J.E.

2002-01-31

A robotic crawler was deployed into the process cells at the 224-T Building to perform cell characterization. The most significant hazard was the potential for criticality upon introduction of a moderating material. Due to the unknown fissile inventory in the cells and the potential moderation affects of a person, manned entry was considered too high of a risk, and a robotic crawler was determined to be the best option for the initial characterization. The robotic crawler provided maneuverability, allowing access to areas in the cells where debris was found. It provided visual inspection in areas with little light, using amore » low lux pan and tilt camera system. Also, it provided fissile inventory measurements using a non-destructive assay (NDA) detector. The NDA detector supplied real-time data to maintain criticality control. Other technologies used during the cell characterization were water-cooled suits and a thin water resistant synthetic anti-contamination coverall, used for heat stress reduction. Also, an aluminum framed shelter provided a weather barrier, allowing work to continue under conditions which would have stopped work without it.« less

Effectiveness of a Web-Based Intervention to Reduce Alcohol Consumption among French Hazardous Drinkers: A Randomized Controlled Trial

ERIC Educational Resources Information Center

Guillemont, Juliette; Cogordan, Chloé; Nalpas, Bertrand; Nguyen-Thanh, Vi?t; Richard, Jean-Baptiste; Arwidson, Pierre

2017-01-01

This study aims to evaluate the effectiveness of a web-based intervention to reduce alcohol consumption among hazardous drinkers. A two-group parallel randomized controlled trial was conducted among adults identified as hazardous drinkers according to the Alcohol Use Disorders Identification Test. The intervention delivers personalized normative…

Fall Prevention Research and Practice: A Total Worker Safety Approach

PubMed Central

HSIAO, Hongwei

2014-01-01

Slips, trips, and falls (STF) represent a serious hazard to workers and occupants in many industries, homes, and communities. Often, the cause of a STF incident is multifactorial, encompassing human, environmental, and task risk factors. A STF-related disability can greatly diminish the occupational capability and quality of life of individuals in both the workplace and the home. Countering STF hazards and risks both on and off the job and on all aspects of control measures is a “total worker safety” matter, a challenging yet tangible undertaking. As the federal organization responsible for conducting research for the prevention of work-related injuries in the United States, the National Institute for Occupational Safety and Health (NIOSH) has been conducting research on STF controls for some decades. Many NIOSH research outcomes have been utilized for STF prevention in workplaces, with potential for prevention in homes as well. This paper summarizes the concept of total worker safety for STF control, NIOSH priority research goals, major activities, and accomplishments, and some emerging issues on STF. The strategic planning process for the NIOSH research goals and some identified research focuses are applicable to the development and implementation of global STF research goals. PMID:25345424

The Application of Software Safety to the Constellation Program Launch Control System

NASA Technical Reports Server (NTRS)

Kania, James; Hill, Janice

2011-01-01

The application of software safety practices on the LCS project resulted in the successful implementation of the NASA Software Safety Standard NASA-STD-8719.138 and CxP software safety requirements. The GOP-GEN-GSW-011 Hazard Report was the first report developed at KSC to identify software hazard causes and their controls. This approach can be applied to similar large software - intensive systems where loss of control can lead to a hazard.

An (even) broader perspective: Combining environmental processes and natural hazards education in a MSc programme

NASA Astrophysics Data System (ADS)

Heckmann, Tobias; Haas, Florian; Trappe, Martin; Cyffka, Bernd; Becht, Michael

2010-05-01

Natural hazards are processes occurring in the natural environment that negatively affect human society. In most instances, the definition of natural hazards implies sudden events as different as earthquakes, floods or landslides. In addition, there are other phenomena that occur more subtly or slowly, and nevertheless may have serious adverse effects on the human environment. Hence, a comprehensive study programme in natural hazards has to include not only the conspicuous causes and effects of natural catastrophes, but of environmental processes in general. Geography as a discipline is located at the interface of natural, social and economic sciences; the physical geography programme described here is designed to include the social and economic dimension as well as management issues. Modules strengthening the theoretical background of geomorphic, geological, hydrological and meteorological processes and hazards are complemented by practical work in the field and the laboratory, dealing with measuring and monitoring environmental processes. On this basis, modeling and managing skills are developed. Another thread in the transdisciplinary programme deals with sustainability and environmental policy issues, and environmental psychology (e.g. perception of and reaction to hazards). This will improve the communication and team working skills of students wherever they are part of an interdisciplinary working group. Through the involvement in research programmes, students are confronted ‘hands on' with the different aspects of environmental processes and their consequences; thus, they will be excellently but not exclusively qualified for positions in the ‘natural hazards' sector.

29 CFR 1910.147 - The control of hazardous energy (lockout/tagout).

Code of Federal Regulations, 2012 CFR

2012-07-01

... prohibitions of the outside employer's energy control program. (3) Group lockout or tagout. (i) When servicing... 29 Labor 5 2012-07-01 2012-07-01 false The control of hazardous energy (lockout/tagout). 1910.147... ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General Environmental Controls...

29 CFR 1910.147 - The control of hazardous energy (lockout/tagout).

Code of Federal Regulations, 2013 CFR

2013-07-01

... prohibitions of the outside employer's energy control program. (3) Group lockout or tagout. (i) When servicing... 29 Labor 5 2013-07-01 2013-07-01 false The control of hazardous energy (lockout/tagout). 1910.147... ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General Environmental Controls...

29 CFR 1910.147 - The control of hazardous energy (lockout/tagout).

Code of Federal Regulations, 2014 CFR

2014-07-01

... prohibitions of the outside employer's energy control program. (3) Group lockout or tagout. (i) When servicing... 29 Labor 5 2014-07-01 2014-07-01 false The control of hazardous energy (lockout/tagout). 1910.147... ADMINISTRATION, DEPARTMENT OF LABOR OCCUPATIONAL SAFETY AND HEALTH STANDARDS General Environmental Controls...

46 CFR 111.70-3 - Motor controllers and motor-control centers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... pump, elevator, steering gear, or auxiliary that is vital to the vessel's propulsion system, except a... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Motor Circuits, Controllers, and Protection § 111.70-3 Motor... operation is not hazardous. If automatic restart is hazardous, the motor controller must have low-voltage...

46 CFR 111.70-3 - Motor controllers and motor-control centers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... pump, elevator, steering gear, or auxiliary that is vital to the vessel's propulsion system, except a... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Motor Circuits, Controllers, and Protection § 111.70-3 Motor... operation is not hazardous. If automatic restart is hazardous, the motor controller must have low-voltage...

46 CFR 111.70-3 - Motor controllers and motor-control centers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... pump, elevator, steering gear, or auxiliary that is vital to the vessel's propulsion system, except a... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Motor Circuits, Controllers, and Protection § 111.70-3 Motor... operation is not hazardous. If automatic restart is hazardous, the motor controller must have low-voltage...

46 CFR 111.70-3 - Motor controllers and motor-control centers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... pump, elevator, steering gear, or auxiliary that is vital to the vessel's propulsion system, except a... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Motor Circuits, Controllers, and Protection § 111.70-3 Motor... operation is not hazardous. If automatic restart is hazardous, the motor controller must have low-voltage...

46 CFR 111.70-3 - Motor controllers and motor-control centers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... pump, elevator, steering gear, or auxiliary that is vital to the vessel's propulsion system, except a... ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Motor Circuits, Controllers, and Protection § 111.70-3 Motor... operation is not hazardous. If automatic restart is hazardous, the motor controller must have low-voltage...

Supplement Analysis for the Transmission System Vegetation Management Program FEIS (DOE/EIS-0285/SA-15)

DOE Office of Scientific and Technical Information (OSTI.GOV)

N /A

BPA proposes to clear unwanted vegetation in the rights-of-ways and around tower structures that may impede the operation and maintenance of the subject transmission lines. Work also includes clearing of a small (<1/4 mile) section of access road. All work will be in accordance with the National Electrical Safety Code and BPA standards. See Section 1.1 of the attached checklist for detailed information on each section of the referenced transmission lines. BPA will conduct the vegetation control with the goal of removing tall-growing vegetation that is currently or will soon be a hazard to the transmission lines and where possiblemore » to promote low-growing plant communities in the right-of-way. This project meets the standards and guidelines for the Transmission System Vegetation Management Program Final Environmental Impact Statement (FEIS) and Record of Decision (ROD). The vegetation needing control is mainly Douglas Fir, Alder, and blackberries as indicated in Section 1.2 of the attached checklist. The work involved in the ROW includes: clearing tall growing vegetation that is currently or will soon pose a hazard to the lines; treating the associated stumps and re-sprouts with herbicide to ensure that the roots are killed preventing new sprouts; and selectively eliminating tall growing vegetation before it reaches a height or density to begin competing with low-growing vegetation. All work will take place in existing rights-of-ways and around transmission structures. All work will be accomplished by selective vegetation control methods to assure that there is little potential harm to non-target vegetation and to low-growing plants. The work will provide system reliability and fire protection. Also, all off right-of-way trees that are potentially unstable and will fall within a minimum distance or into the zone where the conductors swing will be removed. Access roads will be treated using mowing and herbicide applications. The work will provide system reliability. The subject transmission lines range from 115kV to 230kV and are made up of accompanying access roads, steel and wooden transmission line structures and associated switching platforms. The minimum clearance ranges from 21 feet for 115kV lines to 23 feet for 230kV lines. ROW easement widths vary along the length of the project. Vegetation control for this project is designed to provide a 3 year maintenance free interval. In summary, the overall vegetation management scheme will be to selectively remove tall growing vegetation then apply selective herbicide treatment using cut stump applications.« less

Does Drinking to Cope Explain Links Between Emotion-Driven Impulse Control Difficulties and Hazardous Drinking? A Longitudinal Test

PubMed Central

Watkins, Laura E.; Franz, Molly R.; DiLillo, David; Gratz, Kim L.; Messman-Moore, Terri L.

2016-01-01

Difficulty controlling impulsive behaviors when experiencing negative emotions is a prominent risk factor for hazardous alcohol use, and prior research suggests that drinking to cope may mediate this association. The present study examines this possibility prospectively in a sample of 490 young adult women between the ages of 18 and 25. Participants completed measures of emotion-driven impulse control difficulties, drinking to cope, and hazardous alcohol use at six time points over the course of approximately 20 months (i.e., one assessment every four months). Multilevel structural equation modeling revealed that drinking to cope fully mediated the relationship between emotion-driven impulse control difficulties and hazardous alcohol use when examining these relationships between individuals and partially mediated this relation when examining these relationships within individuals. These findings suggest that drinking to cope is a key mechanism in the relationship between emotion-driven impulse control difficulties and hazardous drinking. Results highlight the importance of targeting both emotion dysregulation and drinking to cope when treating young women for alcohol use problems. PMID:26502334

Maternity leave in the ninth month of pregnancy and birth outcomes among working women.

PubMed

Guendelman, Sylvia; Pearl, Michelle; Graham, Steve; Hubbard, Alan; Hosang, Nap; Kharrazi, Martin

2009-01-01

The health effects of antenatal maternity leave have been scarcely evaluated. In California, women are eligible for paid benefits up to 4 weeks before delivery. We explored whether leave at > or =36 weeks gestation increases gestation and birthweight, and reduces primary cesarean deliveries among full-time working women. Drawing from a 2002--2003 nested case-control study of preterm birth and low birthweight among working women in Southern California, we compared a cohort of women who took leave (n = 62) or worked until delivery (n = 385). Models weighted for probability of sampling were used to calculate hazards ratios for gestational age, odds ratios (OR) for primary cesarean delivery, and multilinear regression coefficients for birthweight. Leave-takers were similar to non-leave-takers on demographic and health characteristics, except that more clerical workers took leave (p = .02). Compared with non-leave-takers, leave-takers had almost 4 times lower odds of cesarean delivery after adjusting for covariates (OR, 0.27; 95% confidence interval [CI], 0.08-0.94). Overall, there were no marked differences in length of gestation or mean birthweight. However, in a subgroup of women whose efforts outstripped their occupational rewards, gestation was prolonged (hazard ratio for delivery each day between 36 and 41 weeks, 0.56; 95% CI, 0.34-0.93). Maternity leave in late pregnancy shows promise for reducing cesarean deliveries and prolonging gestation in occupationally strained women.

Miniature Earthmover

NASA Technical Reports Server (NTRS)

1996-01-01

International Machinery Corporation (IMC) developed a miniature earthmover, the 1/8 scale Caterpillar D11N Track-type Tractor, with trademark product approval and manufacturing/marketing license from Caterpillar, Inc. Through Marshall Space Flight Center assistance, the company has acquired infrared remote control technology, originally developed for space exploration. The technology is necessary for exports because of varying restrictions on radio frequency in foreign countries. The Cat D11N weighs only 340 pounds and has the world's first miniature industrial internal combustion engine. The earthmover's uses include mining, construction and demolition work, and hazardous environment work. IMC also has designs of various products for military use and other Caterpillar replicas.

ESSAA: Embedded system safety analysis assistant

NASA Technical Reports Server (NTRS)

Wallace, Peter; Holzer, Joseph; Guarro, Sergio; Hyatt, Larry

1987-01-01

The Embedded System Safety Analysis Assistant (ESSAA) is a knowledge-based tool that can assist in identifying disaster scenarios. Imbedded software issues hazardous control commands to the surrounding hardware. ESSAA is intended to work from outputs to inputs, as a complement to simulation and verification methods. Rather than treating the software in isolation, it examines the context in which the software is to be deployed. Given a specified disasterous outcome, ESSAA works from a qualitative, abstract model of the complete system to infer sets of environmental conditions and/or failures that could cause a disasterous outcome. The scenarios can then be examined in depth for plausibility using existing techniques.

Safety on North Carolina and Kentucky trout farms.

PubMed

Ogunsanya, T J; Durborow, R M; Myers, M L; Cole, H P; Thompson, S L

2011-01-01

The objective of this study was to identify and describe work-related safety hazards, injuries, and near-injury events (close calls) that occurred on trout farms in North Carolina and Kentucky. An interview instrument was used to collect information on occupational hazards, injuries, and near-injury events that resulted from work-related activities. Trout farmers reported occupational hazards including falling live tank lids, slippery surfaces on hauling trucks, lifting strains, falls from raceway walls and walkways, needlesticks while vaccinating fish, allergies, hypothermia/drowning, falls from cranes, chemical exposure, fire/explosions related to oxygen exposure, and electrical contact with overhead power lines. This study also reports solutions suggested by farm safety researchers or used by farmers to prevent the safety hazards found on trout farms.

Earth based approaches to enhancing the health and safety of space operations

NASA Technical Reports Server (NTRS)

Koller, A. M., Jr.

1985-01-01

This paper provides an overview of the current state of our earth based knowledge of space safety hazards; identification of several key areas of concern for space operations; and proposed approaches to providing technology enhancement and information needed to improve the health and safety to those conducting space operations. Included are a review of the identified hazards for space oeprations by hazard classification; a summarization of the information currently available on space experiences and an assessment of potential hazards for long duration spaceflight; a discussion of potential failure modes and their significance for Space Station work: and an assessment of current work which indicates additional research and experimentation which can only be accomplished in actual space missions.

Regulatory Exclusions and Alternative Standards for the Recycling of Materials, Solid Wastes and Hazardous Wastes

EPA Pesticide Factsheets

Determining the Level of Regulation for Hazardous Waste Recycling, Recycled Materials that are not Subject to RCRA Hazardous Waste Regulation, Materials Subject to Alternative Regulatory Controls, Materials Subject to Full Hazardous Waste Regulations.

Agricultural lung diseases.

PubMed Central

Kirkhorn, S R; Garry, V F

2000-01-01

Agriculture is considered one of the most hazardous occupations. Organic dusts and toxic gases constitute some of the most common and potentially disabling occupational and environmental hazards. The changing patterns of agriculture have paradoxically contributed to both improved working conditions and increased exposure to respiratory hazards. Animal confinement operations with increasing animal density, particularly swine confinement, have contributed significantly to increased intensity and duration of exposure to indoor air toxins. Ongoing research has implicated bacterial endotoxins, fungal spores, and the inherent toxicity of grain dusts as causes of upper and lower airway inflammation and as immunologic agents in both grain and animal production. Animal confinement gases, particularly ammonia and hydrogen sulfide, have been implicated as additional sources of respiratory irritants. It has become evident that a significant percentage of agricultural workers have clinical symptoms associated with long-term exposure to organic dusts and animal confinement gases. Respiratory diseases and syndromes, including hypersensitivity pneumonitis, organic dust toxic syndrome, chronic bronchitis, mucous membrane inflammation syndrome, and asthmalike syndrome, result from ongoing acute and chronic exposures. In this review we focus upon the emerging respiratory health issues in a changing agricultural economic and technologic environment. Environmental and occupational hazards and exposures will be emphasized rather than clinical diagnosis and treatment. Methods of prevention, from both engineering controls and personal respiratory perspectives, are also addressed. PMID:10931789

Research on factors allowing a risk assessment of spore-forming pathogenic bacteria in cooked chilled foods containing vegetables: a FAIR collaborative project.

PubMed

Carlin, F; Girardin, H; Peck, M W; Stringer, S C; Barker, G C; Martinez, A; Fernandez, A; Fernandez, P; Waites, W M; Movahedi, S; van Leusden, F; Nauta, M; Moezelaar, R; Torre, M D; Litman, S

2000-09-25

Vegetables are frequent ingredients of cooked chilled foods and are frequently contaminated with spore-forming bacteria (SFB). Therefore, risk assessment studies have been carried out, including the following: hazard identification and characterisation--from an extensive literature review and expertise of the participants, B. cereus and C. botulinum were identified as the main hazards; exposure assessment--consisting of determination of the prevalence of hazardous SFB in cooked chilled foods containing vegetables and in unprocessed vegetables, and identification of SFB representative of the bacterial community in cooked chilled foods containing vegetables, determination of heat-resistance parameters and factors affecting heat resistance of SFB, determination of the growth kinetics of SFB in vegetable substrate and of the influence of controlling factors, validation of previous work in complex food systems and by challenge testing and information about process and storage conditions of cooked chilled foods containing vegetables. The paper illustrates some original results obtained in the course of the project. The results and information collected from scientific literature or from the expertise of the participants are integrated into the microbial risk assessment, using both a Bayesian belief network approach and a process risk model approach, previously applied to other foodborne hazards.

SCADA data and the quantification of hazardous events for QMRA.

PubMed

Nilsson, P; Roser, D; Thorwaldsdotter, R; Petterson, S; Davies, C; Signor, R; Bergstedt, O; Ashbolt, N

2007-01-01

The objective of this study was to assess the use of on-line monitoring to support the QMRA at water treatment plants studied in the EU MicroRisk project. SCADA data were obtained from three Catchment-to-Tap Systems (CTS) along with system descriptions, diary records, grab sample data and deviation reports. Particular attention was paid to estimating hazardous event frequency, duration and magnitude. Using Shewart and CUSUM we identified 'change-points' corresponding to events of between 10 min and >1 month duration in timeseries data. Our analysis confirmed it is possible to quantify hazardous event durations from turbidity, chlorine residual and pH records and distinguish them from non-hazardous variability in the timeseries dataset. The durations of most 'events' were short-term (0.5-2.3 h). These data were combined with QMRA to estimate pathogen infection risk arising from such events as chlorination failure. While analysis of SCADA data alone could identify events provisionally, its interpretation was severely constrained in the absence of diary records and other system information. SCADA data analysis should only complement traditional water sampling, rather than replace it. More work on on-line data management, quality control and interpretation is needed before it can be used routinely for event characterization.

Working conditions as risk factors for disability retirement: a longitudinal register linkage study

PubMed Central

2012-01-01

Background Early retirement due to disability is a public health and work environment problem that shortens working careers. Transition to disability retirement is based on ill-health, but working conditions are also of relevance. We examined the contributions of work arrangements, physical working conditions and psychosocial working conditions to subsequent disability retirement. Methods The data were derived from the Helsinki Health Study cohort on employees of the City of Helsinki, Finland. Information on working conditions was obtained from the baseline surveys conducted in 2000, 2001 and 2002. These data were linked with register data on disability retirement and their main diagnoses obtained from the Finnish Centre for Pensions. Follow up by the end of 2008 yielded 525 disability retirement events. The analysed data included 6525 participants and 525 disability retirement events. Hazard ratios (HR) and 95% confidence intervals (95% CI) were calculated from Cox regression analysis. Results Several working conditions showed own associations with disability retirement before adjustment. After adjustment for all working conditions, the primary risk factors for all-cause disability retirement were physical workload among women (HR 2.02, 95% CI 1.57-2.59) and men (HR 2.00, 95% CI 1.18-3.38), and low job control among women (HR 1.60, 95% CI 1.29-1.99). In addition, for disability retirement due to musculoskeletal causes, the risk factors were physical workload and low job control. For disability retirement due to mental causes the risk factors were computer work and low job control. Furthermore, occupational class was a risk factor for disability retirement due to all causes and musculoskeletal diseases. Conclusions Among various working conditions, those that are physically demanding and those that imply low job control are potential risk factors for disability retirement. Improving the physical working environment and enhancing control over one’s job is likely to help prevent early retirement due to disability. PMID:22537302

A Summary of Research and Progress on Carbon Monoxide Exposure Control Solutions on Houseboats

PubMed Central

Hall, Ronald M.; Earnest, G. Scott; Hammond, Duane R.; Dunn, Kevin H.; Garcia, Alberto

2015-01-01

Investigations of carbon monoxide (CO-related poisonings and deaths on houseboats were conducted by the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. These investigations measured hazardous CO concentrations on and around houseboats that utilize gasoline-powered generators. Engineering control devices were developed and tested to mitigate this deadly hazard. CO emissions were measured using various sampling techniques which included exhaust emission analyzers, detector tubes, evacuated containers (grab air samples analyzed by a gas chromatograph), and direct-reading CO monitors. CO results on houseboats equipped with gasoline-powered generators without emission controls indicated hazardous CO concentrations exceeding immediately dangerous to life and health (IDLH) levels in potentially occupied areas of the houseboat. Air sample results on houseboats that were equipped with engineering controls to remove the hazard were highly effective and reduced CO levels by over 98% in potentially occupied areas. The engineering control devices used to reduce the hazardous CO emissions from gasoline-powered generators on houseboats were extremely effective at reducing CO concentrations to safe levels in potentially occupied areas on the houseboats and are now beginning to be widely used. PMID:24568306

A summary of research and progress on carbon monoxide exposure control solutions on houseboats.

PubMed

Hall, Ronald M; Earnest, G Scott; Hammond, Duane R; Dunn, Kevin H; Garcia, Alberto

2014-01-01

Investigations of carbon monoxide (CO-related poisonings and deaths on houseboats were conducted by the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. These investigations measured hazardous CO concentrations on and around houseboats that utilize gasoline-powered generators. Engineering control devices were developed and tested to mitigate this deadly hazard. CO emissions were measured using various sampling techniques which included exhaust emission analyzers, detector tubes, evacuated containers (grab air samples analyzed by a gas chromatograph), and direct-reading CO monitors. CO results on houseboats equipped with gasoline-powered generators without emission controls indicated hazardous CO concentrations exceeding immediately dangerous to life and health (IDLH) levels in potentially occupied areas of the houseboat. Air sample results on houseboats that were equipped with engineering controls to remove the hazard were highly effective and reduced CO levels by over 98% in potentially occupied areas. The engineering control devices used to reduce the hazardous CO emissions from gasoline-powered generators on houseboats were extremely effective at reducing CO concentrations to safe levels in potentially occupied areas on the houseboats and are now beginning to be widely used.

Identification of ergonomics interventions used to reduce musculoskeletal loading for building installation tasks.

PubMed

Albers, Jim; Estill, Cherie; MacDonald, Leslie

2005-07-01

Skilled workers in the mechanical and electrical installation (M/EI) building and construction trades experience high rates of disabling work-related musculoskeletal disorders (WMSDs). The M/EI trades involve installing piping; heating, ventilation and air conditioning (HVAC), and electrical systems in residential, commercial, and industrial buildings. In the absence of an ergonomics standard in the United States, some building and construction contractors, including M/EI sector contractors, have implemented various ergonomics interventions on their worksites on a voluntary basis. However, no data were available to determine the type of voluntary control measures being implemented, the task-specific hazards for which control measures needed to be developed or refined, and perceived barriers to improving hazard control. As part of a larger effort to obtain this data, the National Institute for Occupational Safety and Health (NIOSH) organized a stakeholder meeting to gather information regarding ergonomics interventions or "best practices" by M/EI contractors and tradespeople. The attendees included 39 industry representatives, 17 construction ergonomics researchers from government and academia, and four ergonomics consultants with experience in the construction industry. Participants spent more than 50% of time meeting in small trade-specific breakout sessions. According to the participants, tasks common to the three trades included (1) drill holes and shoot fasteners; (2) place and install systems, and (3) lift and carry materials and equipment. Engineering interventions described in the stakeholder meeting included tools, equipment, and engineered building materials; administrative controls largely consisted of training and education programs and modifications of work and management practice. Most participants believed that there were significant limits to the impact individual contractors and tradespeople could have in leading ergonomics improvement in the building and construction industry.

48 CFR 28.305 - Overseas workers' compensation and war-hazard insurance.

Code of Federal Regulations, 2010 CFR

2010-10-01

...' compensation and war-hazard insurance. 28.305 Section 28.305 Federal Acquisition Regulations System FEDERAL...' compensation and war-hazard insurance. (a) Public-work contract, as used in this subpart, means any contract... operations under service contracts and projects in connection with the national defense or with war...

29 CFR 1915.90 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 29 Labor 7 2013-07-01 2013-07-01 false Safety color code for marking physical hazards. 1915.90 Section 1915.90 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... General Working Conditions § 1915.90 Safety color code for marking physical hazards. The requirements...

29 CFR 1915.90 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 29 Labor 7 2014-07-01 2014-07-01 false Safety color code for marking physical hazards. 1915.90 Section 1915.90 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... General Working Conditions § 1915.90 Safety color code for marking physical hazards. The requirements...

29 CFR 1915.90 - Safety color code for marking physical hazards.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 29 Labor 7 2012-07-01 2012-07-01 false Safety color code for marking physical hazards. 1915.90 Section 1915.90 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH... General Working Conditions § 1915.90 Safety color code for marking physical hazards. The requirements...

8 CFR 258.2 - Exceptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... longshore work at any United States port under the exceptions provided for in paragraphs (a)(2), (b), or (c... hazardous dry bulk cargo. (i) All tankers qualify for the hazardous cargo exception, including parcel tankers, except for a tanker that has been gas-freed to transport non-hazardous dry bulk commodities. (ii...

76 FR 58404 - National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-21

... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial Deletion of the..., as amended, is an appendix of the National Oil and Hazardous Substances Pollution Contingency Plan... opportunities for investigation and soil remediation, if the Program's Work Group determines that lead in...

How Can the Science Community Support Reality Based Policies to Reducing the Escalating Toll of Natural Hazards?

NASA Astrophysics Data System (ADS)

Thomas, E. A.

2012-12-01

Worldwide, the toll of disaster damage caused by foreseeable natural hazards is growing, despite the fact that science is increasingly able to quantify the risk and foresee the likely location of natural events (NCDC 2012; NHC 2010). Those events can cause disastrous consequences if human built infrastructure is not properly designed for both the current state and future events (IBHS, 2012). Our existing approaches are not working at reducing the mounting toll of disasters which follow foreseeable natural events. Rather, even if the climate were not changing, current land use decisions coupled with development, engineering, design, and construction practices are significantly contributing to further increasing an unsustainable toll from disasters (Pielke, Gratz et al. 2007). Safe and proper construction practices developed to reduce flood losses (e.g. Design for Flooding, Watson, Adams et al., 2010) are all too often thought of as a zero sum situation where the community wins and the developer loses. In reality, the United States and the rest of the world often can find win-win solutions based on sound economics, law, ethics, and environmental sustainability that will benefit communities, developers, and natural hazard risk mitigation practitioners. While such solutions are being implemented in a fragmentary manner throughout the United States, communities implementing these solutions are increasingly working together in peer networks, such as the Natural Hazard Mitigation Association (NHMA)'s Resilient Neighbors Network. Examples include the Urban Drainage and Flood Control District that covers the metropolitan Denver area and recent work in Tulsa, Oklahoma. This presentation will set forth the scientific, ethical, and legal basis of higher development standards which, when combined with good negotiations techniques, can significantly decrease the terrible misery from wildfires, tornadoes, floods, and other natural disasters. Communities clearly have the legal right to implement safe design standards (Thomas, Riley Medlock 2008); yet all too often do not (NOAA, 2010). The required negotiations techniques must include outreach even to those who believe the topics of climate change and sustainability are some sort of plot against property rights and the free enterprise system. The presentation will also challenge the scientific community to support reasoned efforts to better prepare society for the even greater challenges posed by climate variability, uncertainty, and change: to work with practitioners who seek to build a safe and sustainable future to identify gaps in scientific knowledge and help develop workable solutions at the local level. Edward A. Thomas Esq. President Natural Hazard Mitigation Association

Challenge of surrogate endpoints.

PubMed

Furgerson, James L; Hannah, William N; Thompson, Jennifer C

2012-03-01

Surrogate endpoints are biomarkers that are intended to substitute for clinical endpoints. They have been used to find novel therapeutic targets, improve the statistical power and shorten the duration of clinical trials, and control the cost of conducting research studies. The more generalized use of surrogate endpoints in clinical decision making can be hazardous and should be undertaken with great caution. This article reviews prior work with surrogate endpoints and highlights caveats and lessons learned from studies using surrogate endpoints.

The association of the original OSHA chemical hazard communication standard with reductions in acute work injuries/illnesses in private industry and the industrial releases of chemical carcinogens.

PubMed

Oleinick, Arthur

2014-02-01

OSHA predicted the original chemical Hazard Communication Standard (HCS) would cumulatively reduce the lost workday acute injury/illness rate for exposure events by 20% over 20 years and reduce exposure to chemical carcinogens. JoinPoint trend software identified changes in the rate of change of BLS rates for days away from work for acute injuries/illnesses during 1992-2009 for manufacturing and nonmanufacturing industries for both chemical, noxious or allergenic injury exposure events and All other exposure events. The annual percent change in the rates was used to adjust observed numbers of cases to estimate their association with the standard. A case-control study of EPA's Toxic Release Inventory 1988-2009 data compared carcinogen and non-carcinogens' releases. The study estimates that the HCS was associated with a reduction in the number of acute injuries/illnesses due to chemical injury exposure events over the background rate in the range 107,569-459,395 (Hudson method/modified BIC model) depending on whether the HCS is treated as a marginal or sole factor in the decrease. Carcinogen releases have declined at a substantially faster rate than control non-carcinogens. The previous HCS standard was associated with significant reductions in chemical event acute injuries/illnesses and chemical carcinogen exposures. © 2013 Wiley Periodicals, Inc.

Economic development and occupational health in Latin America: new directions for public health in less developed countries.

PubMed Central

Michaels, D; Barrera, C; Gacharná, M G

1985-01-01

Occupational Health is increasingly recognized as an area of importance in Latin American public health. In the agricultural sector of the region, the concentration of arable land into large holdings devoted to the production of export crops has resulted in the formation of a large migrant work force and greatly increased use of pesticides. The manufacturing sector of Latin America has grown rapidly in size and importance. Throughout the continent, increasing numbers of workers are employed in high-hazard industrial jobs. Limited studies of occupational disease in agriculture, mining, and manufacturing suggest that there is a high prevalence of work-related illness in the populations at risk. Trade unions are generally weak, and the high rate of unemployment and underemployment render occupational health a low priority for many workers. Engineering controls and personal protective equipment are unknown or inadequate in many industries, and there is a shortage of trained occupational health professionals in the region. Steps are being taken by many Latin American governments to begin to address this problem. Needed are: increased worker and professional training; a uniform set of exposure standards; control of multinational marketing and usage of hazardous substances; the development of technical equipment appropriate for local use and increased research on occupational exposure in populations in less developed countries. Images p538-a p539-a PMID:3985242

Telecommuting: Occupational health considerations for employee health and safety.

PubMed

Healy, M L

2000-06-01

1. Information technology has moved "work" out of a centralized location. Employees who telecommute pose significant challenges and considerations for the practice of occupational health nursing. 2. Employer and employee benefits associated with telecommuting are reportedly associated with high levels of job satisfaction. However, the occupational health and safety risks of this new work environment need to be fully assessed and understood. 3. The ergonomic controls to minimize the risk of repetitive motion injuries are the same for both office and home locations. Additional attention need to be paid to implementing risk controls for other physical hazards and psychosocial considerations, as well as personal safety and security issues. 4. The scope of occupational health nursing practice needs to remain dynamic, recognizing the impact new technologies have on the workplace, to continue to meet the needs of the changing workplace.

Situational analysis of household energy and biomass use and associated health burden of indoor air pollution and mitigation efforts in Pakistan.

PubMed

Fatmi, Zafar; Rahman, Asma; Kazi, Ambreen; Kadir, M Masood; Sathiakumar, Nalini

2010-07-01

Biomass fuel burning leads to high levels of suspended particulate matter and hazardous chemicals in the indoor environment in countries where it is in common use, contributing significantly to indoor air pollution (IAP). A situational analysis of household energy and biomass use and associated health effects of IAP was conducted by reviewing published and un-published literature about the situation in Pakistan. In addition to attempt to quantify the burden of ill health due to IAP, this paper also appraises the mitigation measures undertaken to avert the problem in Pakistan. Unfortunately, IAP is still not a recognized environmental hazard in Pakistan and there are no policies and standards to control it at the household level. Only a few original studies related to health effects of IAP have been conducted, mainly on women's health and birth outcome, and only a few governmental, non-governmental and academic institutions are working to improve the IAP situation by introducing improved stoves and renewable energy technology at a small scale. Control of IAP health hazards in Pakistan requires an initial meeting of the stakeholders to define a policy and an action agenda. Simultaneously, studies gathering evidence of impact of intervention through available technologies such as improved stoves would have favorable impact on the health, especially of women and children in Pakistan.

76 FR 48073 - Hazardous Waste Management System: Identification and Listing of Hazardous Waste: Carbon Dioxide...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-08

... Science Basis. Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change [Solomon, S., D. Qin, M. Manning, Z. Chen, M. Marquis, K.B. Averyt, M. Tignor... Vulnerability. Contribution of Working Group II to the Fourth Assessment Report of the Intergovernmental Panel...

Control banding assessment of workers' exposure to indium and its compounds in 13 Japanese indium plants.

PubMed

Higashikubo, Ichiro; Arito, Heihachiro; Ando, Kenji; Araki, Akihiro; Shimizu, Hidesuke; Sakurai, Haruhiko

2018-05-25

This study aimed to assess workers' exposure to indium and its compounds in 55 indium-handling operations among 13 Japanese plants. The surveyed plants were selected from indium-manufacturing plants whose annual indium production exceeded 500 kg. The Control of Substances Hazardous to Health (COSHH) Essentials control banding toolkit, which contains simple scales for hazard levels, quantities in daily use, and "dustiness" characteristics, was used to assess generic risks of indium-handling operations. The operations were then classified into one of four Control Approaches (CAs). There were 35 indium-handling operations classified into CA4 (requires expert advice) and 16 grouped into CA3 (requires containment). There were three operations classified into CA2 (requires engineering controls) and only one into CA1 (requires good general ventilation (GV) and working practices). Of the 51 operations classified as CA4 and CA3, 36 were found to be improperly equipped with local exhaust ventilation, and the remaining 15 operations solely relied on GV practices. Respiratory protective equipment (RPE) used in the 13 indium plants was examined with reference to the recommendations of the COSHH Essentials and Japan's Technical Guidelines. Our findings suggest that stringent engineering control measures and respiratory protection from indium dust are needed to improve indium-handling operations. Our results show that the most common control approach for Japanese indium-handling operations is to require expert advice, including worker health checks for respiratory diseases and exposure measurement by air sampling.

[A study on plasma non-species specific antibody in employees working in a automobile engine testing workshop].

PubMed

Chen, D; Wu, T; Yuan, Y

1996-11-01

To investigate the existence of the non-species specific antibody in plasma of the employees working in an automobile engine testing workshop, and to use it as a scanning marker of various hazards, the heat-stress protein antigen method and western blot technique were used. This study showed that employees working in the automoblile engine testing workshop were affected by various hazards, such as noise, toxic chemicals (carbon monoxide, lead fume, benzene, and so on), and there existed non-species specific antibodies against protein 103,900 and 54,200 of rat liver in their plasma, which were postulated as the specific products produced by exposure to occupational hazards, such as noise, carbon monoxide, et al.

Effort–Reward Imbalance at Work and Incident Coronary Heart Disease

PubMed Central

Siegrist, Johannes; Nyberg, Solja T.; Lunau, Thorsten; Fransson, Eleonor I.; Alfredsson, Lars; Bjorner, Jakob B.; Borritz, Marianne; Burr, Hermann; Erbel, Raimund; Fahlén, Göran; Goldberg, Marcel; Hamer, Mark; Heikkilä, Katriina; Jöckel, Karl-Heinz; Knutsson, Anders; Madsen, Ida E. H.; Nielsen, Martin L.; Nordin, Maria; Oksanen, Tuula; Pejtersen, Jan H.; Pentti, Jaana; Rugulies, Reiner; Salo, Paula; Schupp, Jürgen; Singh-Manoux, Archana; Steptoe, Andrew; Theorell, Töres; Vahtera, Jussi; Westerholm, Peter J. M.; Westerlund, Hugo; Virtanen, Marianna; Zins, Marie; Batty, G. David; Kivimäki, Mika

2017-01-01

Background: Epidemiologic evidence for work stress as a risk factor for coronary heart disease is mostly based on a single measure of stressful work known as job strain, a combination of high demands and low job control. We examined whether a complementary stress measure that assesses an imbalance between efforts spent at work and rewards received predicted coronary heart disease. Methods: This multicohort study (the “IPD-Work” consortium) was based on harmonized individual-level data from 11 European prospective cohort studies. Stressful work in 90,164 men and women without coronary heart disease at baseline was assessed by validated effort–reward imbalance and job strain questionnaires. We defined incident coronary heart disease as the first nonfatal myocardial infarction or coronary death. Study-specific estimates were pooled by random effects meta-analysis. Results: At baseline, 31.7% of study members reported effort–reward imbalance at work and 15.9% reported job strain. During a mean follow-up of 9.8 years, 1,078 coronary events were recorded. After adjustment for potential confounders, a hazard ratio of 1.16 (95% confidence interval, 1.00–1.35) was observed for effort–reward imbalance compared with no imbalance. The hazard ratio was 1.16 (1.01–1.34) for having either effort–reward imbalance or job strain and 1.41 (1.12–1.76) for having both these stressors compared to having neither effort–reward imbalance nor job strain. Conclusions: Individuals with effort–reward imbalance at work have an increased risk of coronary heart disease, and this appears to be independent of job strain experienced. These findings support expanding focus beyond just job strain in future research on work stress. PMID:28570388

Volcano Hazards Program

USGS Publications Warehouse

Venezky, Dina Y.; Myers, Bobbie; Driedger, Carolyn

2008-01-01

Diagram of common volcano hazards. The U.S. Geological Survey Volcano Hazards Program (VHP) monitors unrest and eruptions at U.S. volcanoes, assesses potential hazards, responds to volcanic crises, and conducts research on how volcanoes work. When conditions change at a monitored volcano, the VHP issues public advisories and warnings to alert emergency-management authorities and the public. See http://volcanoes.usgs.gov/ to learn more about volcanoes and find out what's happening now.

Hazards in the theater.

PubMed

Rossol, M; Hinkamp, D

2001-01-01

The authors offer a survey of the myriad and unique safety and health hazards faced past and present by performers and theatrical workers, from preproduction work, through the show, and during the strike (dismantling). Special emphasis is given to health hazards posed by the many new plastic resin systems and adhesives used in set, prop, and costume construction; the hazards of special-effect fogs, smokes, haze, dusts, and pyrotechnic emissions; and theatrical makeup.

Effectiveness of a lumbopelvic monitor and feedback device to change postural behaviour: a protocol for the ELF cluster randomised controlled trial

PubMed Central

Milosavljevic, Stephan

2017-01-01

Introduction Low back pain (LBP) is the most common, costly and disabling musculoskeletal disorder worldwide, and is prevalent in healthcare workers. Posture is a modifiable risk factor for LBP shown to reduce the prevalence of LBP. Our feasibility research suggests that postural feedback might help healthcare workers avoid hazardous postures. The Effectiveness of Lumbopelvic Feedback (ELF) trial will investigate the extent to which postural monitor and feedback (PMF) can reduce exposure to hazardous posture associated with LBP. Methods This is a participant-blinded, randomised controlled trial with blocked cluster random allocation. Participants will include volunteer healthcare workers recruited from aged care institutions and hospitals. A postural monitoring and feedback device will monitor and record lumbopelvic forward bending posture, and provide audio feedback whenever the user sustains a lumbopelvic forward bending posture that exceeds predefined thresholds. The primary outcome measure will be postural behaviour (exceeding thresholds). Secondary outcome measures will be incidence of LBP, participant-reported disability and adherence. Following baseline assessment, we will randomly assign participants to 1 of 2 intervention arms: a feedback group and a no-feedback control group. We will compare between-group differences of changes in postural behaviour by using a repeated measures mixed-effect model analysis of covariance (ANCOVA) at 6 weeks. Postural behaviour baseline scores, work-related psychosocial factors and disability scores will be input as covariates into the statistical models. We will use logistic mixed model analysis and Cox's proportional hazards for assessing the effect of a PMF on LBP incidence between groups. Discussion Posture is a modifiable risk factor for low back disorders. Findings from the ELF trial will inform the design of future clinical trials assessing the effectiveness of wearable technology on minimising hazardous posture during daily living activities in patients with low back disorders. Trial registration number ACTRN12616000449437. PMID:28073798

Fall Hazards Within Senior Independent Living: A Case-Control Study.

PubMed

Kim, Daejin; Portillo, Margaret

2018-01-01

The main purpose of this research was to identify significant relationships between environmental hazards and older adults' falling. Falls can present a major health risk to older persons. Identifying potential environmental hazards that increase fall risks can be effective for developing fall prevention strategies that can create safer residential environments for older adults. The research included a retrospective analysis of 449 fall incident reports in two case-control buildings. In the homes of 88 older adults residing in independent living, an observational study was conducted to identify environmental hazards using two assessment tools including Westmead Home Safety Assessment (WeHSA) and resident interviews. A fall history analysis indicated that falls occurred in the bathroom were significantly associated with hospitalization. The observational study revealed that the bathroom was the most common place for environmental hazards. The research showed, with increasing age and use of mobility assistive aids, there was a corresponding increase in the total number of environmental hazards. Home hazards were significantly and independently associated with the incidence rate of falls. In other words, the high fall rate building included more environmental hazards compared to the low fall rate building while controlling for residents' age and mobility. The current study provides empirical evidence of the link between environmental hazards and older adults' falling, which is useful for developing effective fall intervention design strategies.

Evaluation of COSHH essentials: methylene chloride, isopropanol, and acetone exposures in a small printing plant.

PubMed

Lee, Eun Gyung; Harper, Martin; Bowen, Russell B; Slaven, James

2009-07-01

The current study evaluated the Control of Substances Hazardous to Health (COSHH) Essentials model for short-term task-based exposures and full-shift exposures using measured concentrations of three volatile organic chemicals at a small printing plant. A total of 188 exposure measurements of isopropanol and 187 measurements of acetone were collected and each measurement took approximately 60 min. Historically, collected time-weighted average concentrations (seven results) were evaluated for methylene chloride. The COSHH Essentials model recommended general ventilation control for both isopropanol and acetone. There was good agreement between the task-based exposure measurements and the COSHH Essentials predicted exposure range (PER) for cleaning and print preparation with isopropanol and for cleaning with acetone. For the other tasks and for full-shift exposures, agreement between the exposure measurements and the PER was either moderate or poor. However, for both isopropanol and acetone, our findings suggested that the COSHH Essentials model worked reasonably well because the probabilities of short-term exposure measurements exceeding short-term occupational exposure limits (OELs) or full-shift exposures exceeding the corresponding full-shift OELs were <0.05 under the recommended control strategy. For methylene chloride, the COSHH Essentials recommended containment control but a follow-up study was not able to be performed because it had already been replaced with a less hazardous substance (acetone). This was considered a more acceptable alternative to increasing the level of control.

[Design of an HACCP program for a cocoa processing facility].

PubMed

López D'Sola, Patrizia; Sandia, María Gabriela; Bou Rached, Lizet; Hernández Serrano, Pilar

2012-12-01

The HACCP plan is a food safety management tool used to control physical, chemical and biological hazards associated to food processing through all the processing chain. The aim of this work is to design a HACCP Plan for a Venezuelan cocoa processing facility.The production of safe food products requires that the HACCP system be built upon a solid foundation of prerequisite programs such as Good Manufacturing Practices (GMP) and Sanitation Standard Operating Procedures (SSOP). The existence and effectiveness of these prerequisite programs were previously assessed.Good Agriculture Practices (GAP) audit to cocoa nibs suppliers were performed. To develop the HACCP plan, the five preliminary tasks and the seven HACCP principles were accomplished according to Codex Alimentarius procedures. Three Critical Control Points (CCP) were identified using a decision tree: winnowing (control of ochratoxin A), roasting (Salmonella control) and metallic particles detection. For each CCP, Critical limits were established, the Monitoring procedures, Corrective actions, Procedures for Verification and Documentation concerning all procedures and records appropriate to these principles and their application was established. To implement and maintain a HACCP plan for this processing plant is suggested. Recently OchratoxinA (OTA) has been related to cocoa beans. Although the shell separation from the nib has been reported as an effective measure to control this chemical hazard, ochratoxin prevalence study in cocoa beans produced in the country is recommended, and validate the winnowing step as well

[Working conditions of community nurses].

PubMed

Kułagowska, Ewa; Kosińska, Maria

2010-01-01

To ensure the most efficient workplace health promotion it is essential to identify and monitor health conditions of employees and all components of the work process, as well as to recognize their cause-effect relationships. Community nurses form an occupational group with a specific type of workplace that is usually located in the patient's place of residence and thus not inspected in terms of safety and hygiene. The aim of the study was to identify working conditions of community nurses with special reference to occupational hazards. An anonymous questionnaire was used as a major tool of this survey. It contained 33 questions, concerning the work process, working conditions, work loads and arduousness, hazards and work-related complaints. The questionnaire was completed by 86 community nurses working in the Upper Silesia region. Community nurses generally assessed their work as hard. A more thorough analysis revealed that nursing and curative care, nursing and hygienic care and rehabilitation were regarded by community nurses as hard, whereas social diagnostics and curative diagnostics were assessed as much easier tasks. Excessive physical load, forced position at work, aggressive patients, patients' aggressive family members, dangerous domestic animals, low quality of technical devices in patients' homes were reported as the greatest hazards. The obtained results reveal that working conditions of community nurses do not ensure their safety at work.