Science.gov

Sample records for hemoglobin single crystals

  1. Experiments on Hemoglobin in Single Crystals and Silica Gels Distinguish among Allosteric Models

    PubMed Central

    Henry, Eric R.; Mozzarelli, Andrea; Viappiani, Cristiano; Abbruzzetti, Stefania; Bettati, Stefano; Ronda, Luca; Bruno, Stefano; Eaton, William A.

    2015-01-01

    Trapping quaternary structures of hemoglobin in single crystals or by encapsulation in silica gels has provided a demanding set of data to test statistical mechanical models of allostery. In this work, we compare the results of those experiments with predictions of the four major allosteric models for hemoglobin: the quaternary two-state model of Monod, Wyman, and Changeux; the tertiary two-state model of Henry et al., which is the simplest extension of the Monod-Wyman-Changeux model to include pre-equilibria of tertiary as well as quaternary conformations; the structure-based model of Szabo and Karplus; and the modification of the latter model by Lee and Karplus. We show that only the tertiary two-state model can provide a near quantitative explanation of the single-crystal and gel experimental results. PMID:26038112

  2. Monoclonal antibodies recognizing single amino acid substitutions in hemoglobin

    SciTech Connect

    Stanker, L.H.; Branscomb, E.; Vanderlaan, M.; Jensen, R.H.

    1986-06-01

    Four monoclonal antibodies (mAb) to non-human primate hemoglobin referred to as Cap-4, Cap-5, Rh-2, and Rh-4, and two mAb to human hemoglobin, referred to as H-1 and H-3 were isolated and were partially characterized. Binding studies with these mAb on a panel of hemoglobins and isolated ..cap alpha.. and ..beta.. globin chains revealed a unique reactivity pattern for each mAb. Amino acid sequence analysis of the antigens used to generate the binding data suggests that the specific recognition of certain hemoglobin antigens by each mAb is controlled by the presence of a particular amino acid at a specific position within the epitope. The use of synthetic peptides as antigens confirmed this observation for five of the mAb. No synthetic peptides were tested with the sixth mAb, Rh-2. The amino acids required for binding of mAb Cap-4, Cap-5, Rh-4, and Rh-2 to hemoglobin are alanine at ..beta..5, threonine at ..beta..13, glutamine at ..beta..125, and leucine at ..cap alpha..68. The non-human primate hemoglobin antibodies require a specific amino acid that is not present in human hemoglobin. The amino acid required for binding of Cap-4, Cap-5, and Rh-4 could arise by a single base change in the ..beta.. globin gene, whereas the amino acid required for Rh-2 binding could only occur if two base changes occurred. Thus these mAb are candidate probes for a somatic cell mutation assay on the basis of the detection of peripheral blood red cells that possess single amino acid substituted hemoglobin as a result of single base substitutions in the globin genes of precursor cells.

  3. Intermolecular interactions, nucleation, and thermodynamics of crystallization of hemoglobin C.

    PubMed Central

    Vekilov, Peter G; Feeling-Taylor, Angela R; Petsev, Dimiter N; Galkin, Oleg; Nagel, Ronald L; Hirsch, Rhoda Elison

    2002-01-01

    The mutated hemoglobin HbC (beta 6 Glu-->Lys), in the oxygenated (R) liganded state, forms crystals inside red blood cells of patients with CC and SC diseases. Static and dynamic light scattering characterization of the interactions between the R-state (CO) HbC, HbA, and HbS molecules in low-ionic-strength solutions showed that electrostatics is unimportant and that the interactions are dominated by the specific binding of solutions' ions to the proteins. Microscopic observations and determinations of the nucleation statistics showed that the crystals of HbC nucleate and grow by the attachment of native molecules from the solution and that concurrent amorphous phases, spherulites, and microfibers are not building blocks for the crystal. Using a novel miniaturized light-scintillation technique, we quantified a strong retrograde solubility dependence on temperature. Thermodynamic analyses of HbC crystallization yielded a high positive enthalpy of 155 kJ mol(-1), i.e., the specific interactions favor HbC molecules in the solute state. Then, HbC crystallization is only possible because of the huge entropy gain of 610 J mol(-1) K(-1), likely stemming from the release of up to 10 water molecules per protein intermolecular contact-hydrophobic interaction. Thus, the higher crystallization propensity of R-state HbC is attributable to increased hydrophobicity resulting from the conformational changes that accompany the HbC beta 6 mutation. PMID:12124294

  4. Single Crystal Membranes

    NASA Technical Reports Server (NTRS)

    Stormont, R. W.; Morrison, A.

    1974-01-01

    Single crystal a- and c-axis tubes and ribbons of sodium beta-alumina and sodium magnesium beta-alumina were grown from sodium oxide rich melts. Additional experiments grew ribbon crystals containing sodium magnesium beta, beta double prime, beta triple prime, and beta quadruple prime. A high pressure crystal growth chamber, sodium oxide rich melts, and iridium for all surfaces in contact with the melt were combined with the edge-defined, film-fed growth technique to grow the single crystal beta-alumina tubes and ribbons. The crystals were characterized using metallographic and X-ray diffraction techniques, and wet chemical analysis was used to determine the sodium, magnesium, and aluminum content of the grown crystals.

  5. Understanding single-crystal superalloys

    NASA Technical Reports Server (NTRS)

    Dreshfield, Robert L.

    1986-01-01

    The unique properties of single crystals are considered. The anisotropic properties of single crystals, and the relation between crystal orientation and the fatigue life and slip systems of the crystals are examined. The effect of raft formation on the creep-rupture life of the crystals is studied. Proposed research on the properties of and new applications for single crystals is discussed.

  6. SINGLE CRYSTAL NEUTRON DIFFRACTION.

    SciTech Connect

    KOETZLE,T.F.

    2001-03-13

    Single-crystal neutron diffraction measures the elastic Bragg reflection intensities from crystals of a material, the structure of which is the subject of investigation. A single crystal is placed in a beam of neutrons produced at a nuclear reactor or at a proton accelerator-based spallation source. Single-crystal diffraction measurements are commonly made at thermal neutron beam energies, which correspond to neutron wavelengths in the neighborhood of 1 Angstrom. For high-resolution studies requiring shorter wavelengths (ca. 0.3-0.8 Angstroms), a pulsed spallation source or a high-temperature moderator (a ''hot source'') at a reactor may be used. When complex structures with large unit-cell repeats are under investigation, as is the case in structural biology, a cryogenic-temperature moderator (a ''cold source'') may be employed to obtain longer neutron wavelengths (ca. 4-10 Angstroms). A single-crystal neutron diffraction analysis will determine the crystal structure of the material, typically including its unit cell and space group, the positions of the atomic nuclei and their mean-square displacements, and relevant site occupancies. Because the neutron possesses a magnetic moment, the magnetic structure of the material can be determined as well, from the magnetic contribution to the Bragg intensities. This latter aspect falls beyond the scope of the present unit; for information on magnetic scattering of neutrons see Unit 14.3. Instruments for single-crystal diffraction (single-crystal diffractometers or SCDs) are generally available at the major neutron scattering center facilities. Beam time on many of these instruments is available through a proposal mechanism. A listing of neutron SCD instruments and their corresponding facility contacts is included in an appendix accompanying this unit.

  7. The crystal structure of oxy hemoglobin from high oxygen affinity bird emu (Dromaius novaehollandiae).

    PubMed

    Mohamed Abubakkar, Mohamed H; Saraboji, Kadhirvel; Ponnuswamy, Mon Nanjappa G

    2014-01-01

    Hemoglobin is an honorary enzyme, a two-way respiratory carrier, transporting oxygen from the lungs to the tissues and facilitating the return transport of carbon dioxide. Hemoglobin has high affinity for oxygen and low affinity for carbon dioxide and other substances in the arterial circulation, whereas in the venous circulation these relative affinities are upturned. The oxygen affinity of hemoglobin increases with the fall in temperature and decreases with the increase in pH and 2, 3-bisphosphoglycerate; point mutations also affect the tetrameric arrangement and alter the oxygen affinity. Though several studies have revealed the specific reasons for the adaptation of increased oxygen affinity of avian hemoglobins at high-altitudes, further structural insights on hemoglobins from high oxygen affinity species are required to understand the detailed oxygen adaptation at the molecular level. Herein, we describe the structural investigation of hemoglobin from emu (Dromaius novaehollandiae), a high oxygen affinity bird. Hemoglobin from emu was purified using anion-exchange chromatography, crystallized and determined the structure in the oxy form at a resolution of 2.3 Å; the R-factor of the model was 19.2%. The structure was compared with other oxy hemoglobins of high oxygen affinity avian species; significant changes are noted at intra-subunit contacts which provide the clues for increased oxygen affinity of emu hemoglobin. PMID:25146185

  8. Double filaments in fibers and crystals of deoxygenated hemoglobin S

    SciTech Connect

    Magdoff-Fairchild, B.; Chiu, C.C.

    1980-10-01

    Sickle cell hemoglobin (HbS) molecules in solution or in SS erythrocytes (those from individuals homozygous for the sickle hemoglobin gene), when deoxygenated, aggregate to form fibers that pack into paracrystalline arrays. The diminished oxygen affinity of HbS is produced by the polymerization, and the distortion of the pliant erythrocyte membrane is produced by the polymerization, and the distortion of the pliant erythrocyte membrane in sickle cell disease results from the elongation of polymers and their subsequent alignment. One of the important problems to be solved in sickle cell disease is the definition of the intermolecular interactions that stabilize the fiber structure. Knowledge of these interactions might lead to the design of stereospecific antisickling agents for clinical use that could inhibit polymerization or could at least destabilize the fiber.

  9. Binding of hydroxylated single-walled carbon nanotubes to two hemoproteins, hemoglobin and myoglobin.

    PubMed

    Wang, Yan-Qing; Zhang, Hong-Mei; Cao, Jian

    2014-12-01

    Herein, we studied the binding interactions between hydroxylated single-walled carbon nanotubes and hemoglobin and myoglobin by the use of multi-spectral techniques and molecular modeling. The ultraviolet-vis absorbance and circular dichroism spectral results indicated that the binding interactions existed between hydroxylated single-walled carbon nanotubes and hemoglobin/myoglobin. These binding interactions partially affected the soret/heme bands of hemoglobin and myoglobin. The secondary structures of hemoproteins were partially destroyed by hydroxylated single-walled carbon nanotubes. Fluorescence studies suggested that the complexes formed between hydroxylated single-walled carbon nanotubes and hemoglobin/myoglobin by hydrogen bonding, hydrophobic, and π-π stacking interactions. In addition, molecular modeling analysis well supported the experimental results.

  10. Oxygen binding by alpha(Fe2+)2beta(Ni2+)2 hemoglobin crystals.

    PubMed Central

    Bruno, S.; Bettati, S.; Manfredini, M.; Mozzarelli, A.; Bolognesi, M.; Deriu, D.; Rosano, C.; Tsuneshige, A.; Yonetani, T.; Henry, E. R.

    2000-01-01

    Oxygen binding by hemoglobin fixed in the T state either by crystallization or by encapsulation in silica gels is apparently noncooperative. However, cooperativity might be masked by different oxygen affinities of alpha and beta subunits. Metal hybrid hemoglobins, where the noniron metal does not bind oxygen, provide the opportunity to determine the oxygen affinities of alpha and beta hemes separately. Previous studies have characterized the oxygen binding by alpha(Ni2+)2beta(Fe2+)2 crystals. Here, we have determined the three-dimensional (3D) structure and oxygen binding of alpha(Fe2+)2beta(Ni2+)2 crystals grown from polyethylene glycol solutions. Polarized absorption spectra were recorded at different oxygen pressures with light polarized parallel either to the b or c crystal axis by single crystal microspectrophotometry. The oxygen pressures at 50% saturation (p50s) are 95 +/- 3 and 87 +/- 4 Torr along the b and c crystal axes, respectively, and the corresponding Hill coefficients are 0.96 +/- 0.06 and 0.90 +/- 0.03. Analysis of the binding curves, taking into account the different projections of the alpha hemes along the optical directions, indicates that the oxygen affinity of alpha1 hemes is 1.3-fold lower than alpha2 hemes. Inspection of the 3D structure suggests that this inequivalence may arise from packing interactions of the Hb tetramer within the monoclinic crystal lattice. A similar inequivalence was found for the beta subunits of alpha(Ni2+)2beta(Fe2+)2 crystals. The average oxygen affinity of the alpha subunits (p50 = 91 Torr) is about 1.2-fold higher than the beta subunits (p50 = 110 Torr). In the absence of cooperativity, this heterogeneity yields an oxygen binding curve of Hb A with a Hill coefficient of 0.999. Since the binding curves of Hb A crystals exhibit a Hill coefficient very close to unity, these findings indicate that oxygen binding by T-state hemoglobin is noncooperative, in keeping with the Monod, Wyman, and Changeux model. PMID

  11. Oxygen binding by alpha(Fe2+)2beta(Ni2+)2 hemoglobin crystals.

    PubMed

    Bruno, S; Bettati, S; Manfredini, M; Mozzarelli, A; Bolognesi, M; Deriu, D; Rosano, C; Tsuneshige, A; Yonetani, T; Henry, E R

    2000-04-01

    Oxygen binding by hemoglobin fixed in the T state either by crystallization or by encapsulation in silica gels is apparently noncooperative. However, cooperativity might be masked by different oxygen affinities of alpha and beta subunits. Metal hybrid hemoglobins, where the noniron metal does not bind oxygen, provide the opportunity to determine the oxygen affinities of alpha and beta hemes separately. Previous studies have characterized the oxygen binding by alpha(Ni2+)2beta(Fe2+)2 crystals. Here, we have determined the three-dimensional (3D) structure and oxygen binding of alpha(Fe2+)2beta(Ni2+)2 crystals grown from polyethylene glycol solutions. Polarized absorption spectra were recorded at different oxygen pressures with light polarized parallel either to the b or c crystal axis by single crystal microspectrophotometry. The oxygen pressures at 50% saturation (p50s) are 95 +/- 3 and 87 +/- 4 Torr along the b and c crystal axes, respectively, and the corresponding Hill coefficients are 0.96 +/- 0.06 and 0.90 +/- 0.03. Analysis of the binding curves, taking into account the different projections of the alpha hemes along the optical directions, indicates that the oxygen affinity of alpha1 hemes is 1.3-fold lower than alpha2 hemes. Inspection of the 3D structure suggests that this inequivalence may arise from packing interactions of the Hb tetramer within the monoclinic crystal lattice. A similar inequivalence was found for the beta subunits of alpha(Ni2+)2beta(Fe2+)2 crystals. The average oxygen affinity of the alpha subunits (p50 = 91 Torr) is about 1.2-fold higher than the beta subunits (p50 = 110 Torr). In the absence of cooperativity, this heterogeneity yields an oxygen binding curve of Hb A with a Hill coefficient of 0.999. Since the binding curves of Hb A crystals exhibit a Hill coefficient very close to unity, these findings indicate that oxygen binding by T-state hemoglobin is noncooperative, in keeping with the Monod, Wyman, and Changeux model.

  12. Single Crystal Silicon Instrument Mirrors

    NASA Technical Reports Server (NTRS)

    Bly, Vince

    2007-01-01

    The goals for the fabrication of single crystal silicon instrument mirrors include the following: 1) Develop a process for fabricating lightweight mirrors from single crystal silicon (SCS); 2) Modest lightweighting: 3X to 4X less than equivalent solid mirror; 3) High surface quality, better than lambda/40 RMS @ 633nm; 4) Significantly less expensive than current technology; and 5) Negligible distortion when cooled to cryogenic temperatures.

  13. Single crystals of inulin.

    PubMed

    André, I; Putaux, J L; Chanzy, H; Taravel, F R; Timmermans, J W; de Wit, D

    1996-04-01

    Lamellar crystals of inulin were grown by crystallizing sharp fractions of low molecular weight inulin from dilute aqueous ethanol solutions. The crystals were analyzed using three-dimensional electron diffraction and X-ray powder diagrams. Two crystalline polymorphs were observed, depending on the hydration conditions: a hydrated form which indexed on an orthorhombic unit cell, with space group P2(1)2(1)2(1) and with cell dimensions of a = 1.670 nm, b = 0.980 nm and c (chain axis) = 1.47 nm, together with a pseudo-hexagonal semi-hydrated form with unit cell parameters a = 1.670 nm, b = 0.965 nm and c (chain axis) = 1.44 nm. These parameters, together with the density data, indicate that inulin crystallizes along a pseudo-hexagonal six-fold symmetry with an advance per monomer of 0.24 nm. The difference between the hydrated and the semi-hydrated unit cells does not seem to correspond to any change in the conformation of inulin, but rather to a variation in water content.

  14. Unprecedented crystal dynamics: reversible cascades of single-crystal-to-single-crystal transformations.

    PubMed

    Lv, Gao-Chao; Wang, Peng; Liu, Qing; Fan, Jian; Chen, Kai; Sun, Wei-Yin

    2012-10-21

    A series of Cu(II) complexes showed unprecedented reversible cascades of single-crystal-to-single-crystal (SCSC) transformations, and more interestingly, very rapid crystal dynamic processes were observed in this system via the substitution of coordinating components without loss of single crystallinity.

  15. Development of single crystal membranes

    NASA Technical Reports Server (NTRS)

    Stormont, R. W.; Cocks, F. H.

    1972-01-01

    The design and construction of a high pressure crystal growth chamber was accomplished which would allow the growth of crystals under inert gas pressures of 2 MN/sq m (300 psi). A novel crystal growth technique called EFG was used to grow tubes and rods of the hollandite compounds, BaMgTi7O16, K2MgTi7O16, and tubes of sodium beta-alumina, sodium magnesium-alumina, and potassium beta-alumina. Rods and tubes grown are characterized using metallographic and X-ray diffraction techniques. The hollandite compounds are found to be two or three-phase, composed of coarse grained orientated crystallites. Single crystal c-axis tubes of sodium beta-alumina were grown from melts containing excess sodium oxide. Additional experiments demonstrated that crystals of magnesia doped beta-alumina and potassium beta-alumina also can be achieved by this EFG technique.

  16. Comparison of crystal and solution hemoglobin binding of selected antigelling agents and allosteric modifiers

    SciTech Connect

    Mehanna, A.S.; Abraham, D.J. )

    1990-04-24

    This paper details comprehensive binding studies (solution and X-ray) of human hemoglobin A with a group of halogenated carboxylic acids that were investigated as potential antisickling agents. It is, to our knowledge, the first study to compare solution and crystal binding for a series of compounds under similar high-salt conditions used for cocrystallization. The compounds include ((3,4-dichlorobenzyl)oxy)acetic acid, ((p-bromobenzyl)oxy)acetic acid, clofibric acid, and bezafibrate. The location and stereochemistry of binding sites have been established by X-ray crystallography, while the number of binding sites and affinity constants were measured by using equilibrium dialysis. The observed crystal structures are consistent with the binding observed in solution and that the number of binding sites is independent of salt concentration, while the binding constant increases with increasing salt concentration. The studies also reveal that relatively small changes in the chemical structure of a drug molecule can result in entirely different binding sites on the protein. Moreover, the X-ray studies provide a possible explanation for the multiplicity in function exhibited by these compounds as allosteric modulators and/or antisickling agents. Finally, the studies indicate that these compounds bind differently to the R and T states of hemoglobin, and observation of special significance to the original design of these agents.

  17. Sulfide binding is mediated by zinc ions discovered in the crystal structure of a hydrothermal vent tubeworm hemoglobin.

    PubMed

    Flores, Jason F; Fisher, Charles R; Carney, Susan L; Green, Brian N; Freytag, John K; Schaeffer, Stephen W; Royer, William E

    2005-02-22

    Key to the remarkable ability of vestimentiferan tubeworms to thrive in the harsh conditions of hydrothermal vents are hemoglobins that permit the sequestration and delivery of hydrogen sulfide and oxygen to chemoautotrophic bacteria. Here, we demonstrate that zinc ions, not free cysteine residues, bind sulfide in vestimentiferan hemoglobins. The crystal structure of the C1 hemoglobin from the hydrothermal vent tubeworm Riftia pachyptila has been determined to 3.15 A and revealed the unexpected presence of 12 tightly bound Zn(2+) ions near the threefold axes of this D(3) symmetric hollow sphere. Chelation experiments on R. pachyptila whole-coelomic fluid and purified hemoglobins reveal a role for Zn(2+) ions in sulfide binding. Free cysteine residues, previously proposed as sulfide-binding sites in vestimentiferan hemoglobins, are found buried in surprisingly hydrophobic pockets below the surface of the R. pachyptila C1 molecule, suggesting that access of these residues to environmental sulfide is restricted. Attempts to reduce the sulfide-binding capacities of R. pachyptila hemoglobins by addition of a thiol inhibitor were also unsuccessful. These findings challenge the currently accepted paradigm of annelid hemoglobin evolution and adaptation to reducing environments. PMID:15710902

  18. Detection of nano-oxidation sites on the surface of hemoglobin crystals using tip-enhanced Raman scattering.

    PubMed

    Wood, Bayden R; Asghari-Khiavi, Mehdi; Bailo, Elena; McNaughton, Don; Deckert, Volker

    2012-03-14

    Hemoglobin nanocrystals were analyzed with tip-enhanced Raman scattering (TERS), surface-enhanced resonance Raman scattering (SERRS) and conventional resonance Raman scattering (RRS) using 532 nm excitation. The extremely high spatial resolution of TERS enables selective enhancement of heme, protein, and amino acid bands from the crystal surface not observed in the SERRS or RRS spectra. Two bands appearing at 1378 and 1355 cm(-1) assigned to the ferric and ferrous oxidation state marker bands, respectively, were observed in both TERS and SERRS spectra but not in the RRS spectrum of the bulk sample. The results indicate that nanoscale oxidation changes are occurring at the hemoglobin crystal surface. These changes could be explained by oxygen exchange at the crystal surface and demonstrate the potential of the TERS technique to obtain structural information not possible with conventional Raman microscopy.

  19. Protein single crystal growth under microgravity

    NASA Astrophysics Data System (ADS)

    Littke, Walter; John, Christina

    1986-08-01

    Crystal growth conditions for proteins under microgravity were investigated with two model compounds (β-galactosidase and lysozyme). The single crystals obtained have been found to be significantly larger than those prepared in the same environment on earth.

  20. Quantitative, single-step dual measurement of hemoglobin A1c and total hemoglobin in human whole blood using a gold sandwich immunochromatographic assay for personalized medicine.

    PubMed

    Ang, Shu Hwang; Rambeli, Musalman; Thevarajah, T Malathi; Alias, Yatimah Binti; Khor, Sook Mei

    2016-04-15

    We describe a gold nanoparticle-based sandwich immunoassay for the dual detection and measurement of hemoglobin A1c (HbA1c) and total hemoglobin in the whole blood (without pretreatment) in a single step for personalized medicine. The optimized antibody-functionalized gold nanoparticles immunoreact simultaneously with HbA1c and total hemoglobin to form a sandwich at distinctive test lines to transduce visible signals. The applicability of this method as a personal management tool was demonstrated by establishing a calibration curve to relate % HbA1c, a useful value for type 2 diabetes management, to the signal ratio of captured HbA1c to all other forms of hemoglobin. The platform showed excellent selectivity (100%) toward HbA1c at distinctive test lines when challenged with HbA0, glycated HbA0 and HbA2. The reproducibility of the measurement was good (6.02%) owing to the dual measurement of HbA1c and total hemoglobin. A blood sample stability test revealed that the quantitative measurement of % HbA1c was consistent and no false-positive results were detected. Also, this method distinguished the blood sample with elevated HbF from the normal samples and the variants. The findings of this study highlight the potential of a lateral flow immunosensor as a simple, inexpensive, consistent, and convenient strategy for the dual measurement of HbA1c and total Hb to provide useful % HbA1c values for better on-site diabetes care.

  1. Growth of semicarbazone of benzophenone single crystals

    NASA Astrophysics Data System (ADS)

    Vijayan, N.; Ramesh Babu, R.; Gopalakrishnan, R.; Dhanuskodi, S.; Ramasamy, P.

    2002-03-01

    Semicarbazone of benzophenone single crystals have been grown by slow evaporation solution growth technique. The grown crystals have been characterized using XRD, melting point, FT-IR and UV-Vis spectra analyses. The X-ray diffraction analysis reveals that the crystal belongs to the triclinic crystal system and space group P1. From FT-IR studies it is found that the compound possesses both free and hydrogen bonded N-H stretching modes. The hydrogen bonded N-H stretching mode is found to be the major driving force for packing of molecules in the crystals. The transparency of the grown crystals has been confirmed using UV-Vis spectra.

  2. Ames Lab 101: Single Crystal Growth

    ScienceCinema

    Schlagel, Deborah

    2016-07-12

    Ames Laboratory scientist Deborah Schlagel talks about the Lab's research in growing single crystals of various metals and alloys. The single crystal samples are vital to researchers' understanding of the characteristics of a materials and what gives these materials their particular properties.

  3. Ames Lab 101: Single Crystal Growth

    SciTech Connect

    Schlagel, Deborah

    2013-09-27

    Ames Laboratory scientist Deborah Schlagel talks about the Lab's research in growing single crystals of various metals and alloys. The single crystal samples are vital to researchers' understanding of the characteristics of a materials and what gives these materials their particular properties.

  4. Ultratough single crystal boron-doped diamond

    SciTech Connect

    Hemley, Russell J; Mao, Ho-Kwang; Yan, Chih-Shiue; Liang, Qi

    2015-05-05

    The invention relates to a single crystal boron doped CVD diamond that has a toughness of at least about 22 MPa m.sup.1/2. The invention further relates to a method of manufacturing single crystal boron doped CVD diamond. The growth rate of the diamond can be from about 20-100 .mu.m/h.

  5. Single Crystal Sapphire Optical Fiber Sensor Instrumentation

    SciTech Connect

    Anbo Wang; Russell May; Gary R. Pickrell

    2000-10-28

    The goal of this 30 month program is to develop reliable accurate temperature sensors based on single crystal sapphire materials that can withstand the temperatures and corrosive agents present within the gasifier environment. The research for this reporting period has been segregated into two parallel paths--corrosion resistance measurements for single crystal sapphire fibers and investigation of single crystal sapphire sensor configurations. The ultimate goal of this phase one segment is to design, develop and demonstrate on a laboratory scale a suitable temperature measurement device that can be field tested in phase two of the program.

  6. Growth of shaped single crystals of proteins

    NASA Astrophysics Data System (ADS)

    Moreno, Abel; Rondón, Deyanira; García-Ruiz, Juan Ma.

    1996-09-01

    We present a procedure for obtaining protein single crystals that fill the capillary tubes in which they grow. The implementation was typical of the gel acupuncture method and the four different proteins are used as examples: lysozyme (HEW), thaumatin I, ferritin and insulin. Rod- and prismatic-shaped protein single crystals of these four proteins were grown inside capillary tubes of 0.2, 0.3, 0.5 mm in diameter and, for the case of lysozyme, up to 1.2 mm in diameter. The maximum length measured along the long axes of the rod crystals was 1.6 mm again for lysozyme crystals. It was observed that, once the capillary tube was filled, the crystal continues to grow by diffusion of the precipitating agent throughout the porous network formed by the protein crystal structure. We also discuss the possibility of growing these cylinders of crystalline proteins by the addition of protein solution to the mother liquor through the upper end of the glass capillary while the precipitating agent diffuses through the protein crystal itself. X-ray diffraction patterns confirm the single crystal character of the protein rods.

  7. Hemoglobin Aggregation in Single Red Blood Cells of Sickle Cell Anemia

    NASA Astrophysics Data System (ADS)

    Nishio, Izumi; Tanaka, Toyoichi; Sun, Shao-Tang; Imanishi, Yuri; Tsuyoshi Ohnishi, S.

    1983-06-01

    A laser light scattering technique was used to observe the extent of hemoglobin aggregation in solitary red blood cells of sickle cell anemia. Hemoglobin aggregation was confirmed in deoxygenated cells. The light scattering technique can also be applied to cytoplasmic studies of any biological cell.

  8. Single Crystals Grown Under Unconstrained Conditions

    NASA Astrophysics Data System (ADS)

    Sunagawa, Ichiro

    Based on detailed investigations on morphology (evolution and variation in external forms), surface microtopography of crystal faces (spirals and etch figures), internal morphology (growth sectors, growth banding and associated impurity partitioning) and perfection (dislocations and other lattice defects) in single crystals, we can deduce how and by what mechanism the crystal grew and experienced fluctuation in growth parameters through its growth and post-growth history under unconstrained condition. The information is useful not only in finding appropriate way to growing highly perfect and homogeneous single crystals, but also in deciphering letters sent from the depth of the Earth and the Space. It is also useful in discriminating synthetic from natural gemstones. In this chapter, available methods to obtain molecular information are briefly summarized, and actual examples to demonstrate the importance of this type of investigations are selected from both natural minerals (diamond, quartz, hematite, corundum, beryl, phlogopite) and synthetic crystals (SiC, diamond, corundum, beryl).

  9. Fatigue hardening in niobium single crystals.

    NASA Technical Reports Server (NTRS)

    Doner, M.; Diprimio, J. C.; Salkovitz, E. I.

    1973-01-01

    Nb single crystals of various orientations were cyclically deformed in tension-compression under strain control. At low strain amplitudes all crystals oriented for single slip and some oriented for multiple slip showed a two stage hardening. When present, the first stage was characterized with almost no cyclic work hardening. The rate of hardening in the second stage increased with strain amplitude and the amount of secondary slip. In crystals oriented for single slip kink bands developed on their side faces during rapid hardening stage which resulted in considerable amount of asterism in Laue spots. A cyclic stress-strain curve independent of prior history was found to exist which was also independent of crystal orientation. Furthermore, this curve differed only slightly from that of polycrystalline Nb obtained from data in literature.

  10. System Grows Single-Crystal Fibers

    NASA Technical Reports Server (NTRS)

    Westfall, Leonard; Sayir, Ali; Penn, Wayne

    1994-01-01

    Award-winning Melt Modulation(TM) system produces single or multiple fibers of any variety of single-crystal materials in continuous or discrete lengths. Developed specifically to produce research quantities of fibers for strong, lightweight composite materials that withstand high temperatures in aerospace applications. Also used to grow such single-crystal materials as high-temperature superconductors and fiber-optic materials. Modifications enable system to apply conformal coats to fibers as they are being grown, producing fibers for greater number of composites in which coatings provide thermal and chemical compatibility between fiber and matrix materials.

  11. Characterization of zinc selenide single crystals

    NASA Technical Reports Server (NTRS)

    Gerhardt, Rosario A.

    1996-01-01

    ZnSe single crystals of high quality and low impurity levels are desired for use as substrates in optoelectronic devices. This is especially true when the device requires the formation of homoepitaxial layers. While ZnSe is commercially available, it is at present extremely expensive due to the difficulty of growing single crystal boules with low impurity content and the resultant low yields. Many researchers have found it necessary to heat treat the crystals in liquid Zn in order to remove the impurities, lower the resistivity and activate the photoluminescence at room temperature. The physical vapor transport method (PVT) has been successfully used at MSFC to grow many single crystals of II-VI semiconducting materials including ZnSe. The main goal at NASA has been to try to establish the effect of gravity on the growth parameters. To this effect, crystals have been grown vertically upwards or horizontally. Both (111) and (110) oriented ZnSe crystals have been obtained via unseeded PVT growth. Preliminary characterization of the horizontally grown crystals has revealed that Cu is a major impurity and that the low temperature photoluminescence spectra is dominated by the copper peak. The ratio of the copper peak to the free exciton peak is being used to determine variations in composition throughout the crystal. It was the intent of this project to map the copper composition of various crystals via photoluminescence first, then measure their electrical resistivity and capacitance as a function of frequency before proceeding with a heat treatment designed to remove the copper impurities. However, equipment difficulties with the photoluminescence set up, having to establish a procedure for measuring the electrical properties of the as-grown crystals and time limitations made us re-evaluate the project goals. Vertically grown samples designated as ZnSe-25 were chosen to be measured electrically since they were not expected to show as much variation in their

  12. Neutron detection with single crystal organic scintillators

    SciTech Connect

    Zaitseva, N; Newby, J; Hamel, S; Carman, L; Faust, M; Lordi, V; Cherepy, N; Stoeffl, W; Payne, S

    2009-07-15

    Detection of high-energy neutrons in the presence of gamma radiation background utilizes pulse-shape discrimination (PSD) phenomena in organics studied previously only with limited number of materials, mostly liquid scintillators and single crystal stilbene. The current paper presents the results obtained with broader varieties of luminescent organic single crystals. The studies involve experimental tools of crystal growth and material characterization in combination with the advanced computer modeling, with the final goal of better understanding the relevance between the nature of the organic materials and their PSD properties. Special consideration is given to the factors that may diminish or even completely obscure the PSD properties in scintillating crystals. Among such factors are molecular and crystallographic structures that determine exchange coupling and exciton mobility in organic materials and the impurity effect discussed on the examples of trans-stilbene, bibenzyl, 9,10-diphenylanthracene and diphenylacetylene.

  13. Oxygen Incorporation in Rubrene Single Crystals

    NASA Astrophysics Data System (ADS)

    Mastrogiovanni, Daniel D. T.; Mayer, Jeff; Wan, Alan S.; Vishnyakov, Aleksey; Neimark, Alexander V.; Podzorov, Vitaly; Feldman, Leonard C.; Garfunkel, Eric

    2014-05-01

    Single crystal rubrene is a model organic electronic material showing high carrier mobility and long exciton lifetime. These properties are detrimentally affected when rubrene is exposed to intense light under ambient conditions for prolonged periods of time, possibly due to oxygen up-take. Using photoelectron, scanning probe and ion-based methods, combined with an isotopic oxygen exposure, we present direct evidence of the light-induced reaction of molecular oxygen with single crystal rubrene. Without a significant exposure to light, there is no reaction of oxygen with rubrene for periods of greater than a year; the crystal's surface (and bulk) morphology and chemical composition remain essentially oxygen-free. Grand canonical Monte Carlo computations show no sorbtion of gases into the bulk of rubrene crystal. A mechanism for photo-induced oxygen inclusion is proposed.

  14. Oxygen Incorporation in Rubrene Single Crystals

    PubMed Central

    Mastrogiovanni, Daniel D. T.; Mayer, Jeff; Wan, Alan S.; Vishnyakov, Aleksey; Neimark, Alexander V.; Podzorov, Vitaly; Feldman, Leonard C.; Garfunkel, Eric

    2014-01-01

    Single crystal rubrene is a model organic electronic material showing high carrier mobility and long exciton lifetime. These properties are detrimentally affected when rubrene is exposed to intense light under ambient conditions for prolonged periods of time, possibly due to oxygen up-take. Using photoelectron, scanning probe and ion-based methods, combined with an isotopic oxygen exposure, we present direct evidence of the light-induced reaction of molecular oxygen with single crystal rubrene. Without a significant exposure to light, there is no reaction of oxygen with rubrene for periods of greater than a year; the crystal's surface (and bulk) morphology and chemical composition remain essentially oxygen-free. Grand canonical Monte Carlo computations show no sorbtion of gases into the bulk of rubrene crystal. A mechanism for photo-induced oxygen inclusion is proposed. PMID:24786311

  15. Oxygen incorporation in rubrene single crystals.

    PubMed

    Mastrogiovanni, Daniel D T; Mayer, Jeff; Wan, Alan S; Vishnyakov, Aleksey; Neimark, Alexander V; Podzorov, Vitaly; Feldman, Leonard C; Garfunkel, Eric

    2014-01-01

    Single crystal rubrene is a model organic electronic material showing high carrier mobility and long exciton lifetime. These properties are detrimentally affected when rubrene is exposed to intense light under ambient conditions for prolonged periods of time, possibly due to oxygen up-take. Using photoelectron, scanning probe and ion-based methods, combined with an isotopic oxygen exposure, we present direct evidence of the light-induced reaction of molecular oxygen with single crystal rubrene. Without a significant exposure to light, there is no reaction of oxygen with rubrene for periods of greater than a year; the crystal's surface (and bulk) morphology and chemical composition remain essentially oxygen-free. Grand canonical Monte Carlo computations show no sorbtion of gases into the bulk of rubrene crystal. A mechanism for photo-induced oxygen inclusion is proposed. PMID:24786311

  16. Single-Crystal-to-Single-Crystal Transformations in One Dimensional Ag-Eu Helical System

    SciTech Connect

    Cai, Yue-Peng; Zhout, Xiu-Xia; Zhout, Zheng-Yuan; Zhu, Shi-Zheng; Thallapally, Praveen K.; Liu, Jun

    2009-07-06

    Single-crystal-to-single-crystal transformation of 1-D 4d-4f coordination polymers have been investigated for the first time. It displays high selectivity for Mg2+ and can be used as magnesium ion-selective luminescent probe. More importantly, we observed the transformation of meso-helical chain to rac-helical chain as a function of temperature.

  17. Single crystals of metal solid solutions

    NASA Technical Reports Server (NTRS)

    Miller, J. F.; Austin, A. E.; Richard, N.; Griesenauer, N. M.; Moak, D. P.; Mehrabian, M. R.; Gelles, S. H.

    1974-01-01

    The following definitions were sought in the research on single crystals of metal solid solutions: (1) the influence of convection and/or gravity present during crystallization on the substructure of a metal solid solution; (2) the influence of a magnetic field applied during crystallization on the substructure of a metal solid solution; and (3) requirements for a space flight experiment to verify the results. Growth conditions for the selected silver-zinc alloy system are described, along with pertinent technical and experimental details of the project.

  18. Graphene single crystals: size and morphology engineering.

    PubMed

    Geng, Dechao; Wang, Huaping; Yu, Gui

    2015-05-13

    Recently developed chemical vapor deposition (CVD) is considered as an effective way to large-area and high-quality graphene preparation due to its ultra-low cost, high controllability, and high scalability. However, CVD-grown graphene film is polycrystalline, and composed of numerous grains separated by grain boundaries, which are detrimental to graphene-based electronics. Intensive investigations have been inspired on the controlled growth of graphene single crystals with the absence of intrinsic defects. As the two most concerned parameters, the size and morphology serve critical roles in affecting properties and understanding the growth mechanism of graphene crystals. Therefore, a precise tuning of the size and morphology will be of great significance in scale-up graphene production and wide applications. Here, recent advances in the synthesis of graphene single crystals on both metals and dielectric substrates by the CVD method are discussed. The review mainly covers the size and morphology engineering of graphene single crystals. Furthermore, recent progress in the growth mechanism and device applications of graphene single crystals are presented. Finally, the opportunities and challenges are discussed.

  19. First Single-Crystal Mullite Fibers

    NASA Technical Reports Server (NTRS)

    1997-01-01

    Ceramic-matrix composites strengthened by suitable fiber additions are being developed for high-temperature use, particularly for aerospace applications. New oxide-based fibers, such as mullite, are particularly desirable because of their resistance to high-temperature oxidative environments. Mullite is a candidate material in both fiber and matrix form. The primary objective of this work was to determine the growth characteristics of single-crystal mullite fibers produced by the laser-heated floating zone method. Directionally solidified fibers with nominal mullite compositions of 3Al2O3 2SiO2 were grown by the laser-heated floating zone method at the NASA Lewis Research Center. SEM analysis revealed that the single-crystal fibers grown in this study were strongly faceted and that the facets act as critical flaws, limiting fiber strength. The average fiber tensile strength is 1.15 GPa at room temperature. The mullite fibers exhibit superior strength retention (80 percent of their room temperature tensile strength at 1450 C). Examined by transmission electron microscopy, these mullite single crystals are free of dislocations, low-angle boundaries, and voids. In addition, they show a high degree of oxygen vacancy ordering. High-resolution digital images from an optical microscope furnish evidence of the formation of a liquid-liquid miscibility gap during crystal growth. These images represent the first experimental evidence of liquid immiscibility for these compositions and temperatures. Continuing investigation with controlled seeding of mullite single crystals is planned.

  20. Growth mode of polyethylene single crystals

    SciTech Connect

    Toda, A.; Tanzawa, Y.; Nakagawa, Y.

    1995-12-01

    The growth kinetics and morphology of polyethylene single crystals of narrow molecular weight fractions is reviewed. Single crystals grown from the melt show two types of morphology in the lateral habits; a lenticular shape elongated in the direction of the b-axis (type A) and a truncated lozenge with curved edges of the (100) growth faces (type B). The change in the lateral habits occurs in the vicinity of a transition in the supercooling dependence of growth rate along the b-axis direction. This talk will discuss the mechanism of the change in morphology and growth mode.

  1. Single-Crystal Springs For Accelerometers

    NASA Technical Reports Server (NTRS)

    Vanzandt, Thomas R.; Kaiser, William J.; Kenny, Thomas W.

    1995-01-01

    Thermal noise reduced, enabling use of smaller proof masses. Spring-and-mass accelerometers in which springs made of single-crystal material being developed. In spring-and-mass accelerometer, proof mass attached to one end of spring, and acceleration of object at other end of spring measured in terms of deflection of spring, provided frequency spectrum of acceleration lies well below resonant frequency of spring-and-proof-mass system. Use of single-crystal spring materials instead of such polycrystalline spring materials as ordinary metals makes possible to construct highly sensitive accelerometers (including seismometers) with small proof masses.

  2. Microhardness studies of sulfamic acid single crystal

    NASA Astrophysics Data System (ADS)

    Santhosh Kumar, A.; Joseph, Cyriac; Paulose, Reshmi; R, Rajesh; Joseph, Georgekutty; Louis, Godfrey

    2015-02-01

    Vicker's microhardness study of (100), (010) and (001) faces of a non-linear optical crystal sulfamic acid have been reported. Single crystals of sulfamic acid have been grown by slow evaporation method. The load dependence of the Vickers microhardness of sulfamic acid crystal were investigated and analyzed from the stand point of various theoretical models. Crystal samples in a, b and c-axes exhibit reverse indentation effect which is best described by Meyer's law, Hays-Kendall's approach and proportional specimen resistance (PSR) models. The negative values of load dependent quantities in Hays-Kendall's approach and PSR model suggest that the origin of indentation size effect is associated with the process of relaxation of indentation stresses.

  3. From protein structure to function via single crystal optical spectroscopy

    PubMed Central

    Ronda, Luca; Bruno, Stefano; Bettati, Stefano; Storici, Paola; Mozzarelli, Andrea

    2015-01-01

    The more than 100,000 protein structures determined by X-ray crystallography provide a wealth of information for the characterization of biological processes at the molecular level. However, several crystallographic “artifacts,” including conformational selection, crystallization conditions and radiation damages, may affect the quality and the interpretation of the electron density maps, thus limiting the relevance of structure determinations. Moreover, for most of these structures, no functional data have been obtained in the crystalline state, thus posing serious questions on their validity in infereing protein mechanisms. In order to solve these issues, spectroscopic methods have been applied for the determination of equilibrium and kinetic properties of proteins in the crystalline state. These methods are UV-vis spectrophotometry, spectrofluorimetry, IR, EPR, Raman, and resonance Raman spectroscopy. Some of these approaches have been implemented with on-line instruments at X-ray synchrotron beamlines. Here, we provide an overview of investigations predominantly carried out in our laboratory by single crystal polarized absorption UV-vis microspectrophotometry, the most applied technique for the functional characterization of proteins in the crystalline state. Studies on hemoglobins, pyridoxal 5′-phosphate dependent enzymes and green fluorescent protein in the crystalline state have addressed key biological issues, leading to either straightforward structure-function correlations or limitations to structure-based mechanisms. PMID:25988179

  4. Single crystal tungsten kinetic energy penetrators

    SciTech Connect

    Cline, C.F.; Gogolewski, R.P.

    1992-05-01

    We have explored the terminal ballistic performance of single crystal tungsten as a kinetic energy penetrator. Scientific speculation as to the anticipated penetration performance and nature of the interaction between such a kinetic energy penetrator and semi-infinite and spaced metallic targets has led us to perform laboratory scale experiments and metallographic examinations of post-impact penetrator materials. The single tungsten crystals were ground into kinetic energy penetrators with the [l angle]111[r angle] and [l angle]100[r angle] crystal direction being coincident with the axis of symmetry of the penetrators. The crystals were electro-polished to their final diameter. We, compared the terminal performance at current ordnance speeds of [l angle]111[r angle] single crystal tungsten to 90W-10 (NiFe) cemented tungsten and textured pure tungsten in laboratory scale ballistic experiments against a spaced steel (triple) target at sixty-five degrees obliquity. We also compared the terminal performance of [l angle]100[r angle] and [l angle]111[r angle] single crystal tungsten with 90W-10 and 98W02 (NiFe) cemented tungsten and textured pure tungsten in laboratory scale ballistic experiments against monolithic 4340 alloy steel (HRC = 36) at normal impact. We radiographed the penetrators during the interactions with the targets, we recovered portions of the penetrators after the ballistic experiments, and we conducted metallographic examinations of penetrator remnants. From the radiographic records and the metallographic examinations, we drew conclusions pertaining to insights into the terminal interactions of the penetrators with the targets and suggestions as to improved compositions of the cemented tungsten penetrators.

  5. Single crystal functional oxides on silicon

    PubMed Central

    Bakaul, Saidur Rahman; Serrao, Claudy Rayan; Lee, Michelle; Yeung, Chun Wing; Sarker, Asis; Hsu, Shang-Lin; Yadav, Ajay Kumar; Dedon, Liv; You, Long; Khan, Asif Islam; Clarkson, James David; Hu, Chenming; Ramesh, Ramamoorthy; Salahuddin, Sayeef

    2016-01-01

    Single-crystalline thin films of complex oxides show a rich variety of functional properties such as ferroelectricity, piezoelectricity, ferro and antiferromagnetism and so on that have the potential for completely new electronic applications. Direct synthesis of such oxides on silicon remains challenging because of the fundamental crystal chemistry and mechanical incompatibility of dissimilar interfaces. Here we report integration of thin (down to one unit cell) single crystalline, complex oxide films onto silicon substrates, by epitaxial transfer at room temperature. In a field-effect transistor using a transferred lead zirconate titanate layer as the gate insulator, we demonstrate direct reversible control of the semiconductor channel charge with polarization state. These results represent the realization of long pursued but yet to be demonstrated single-crystal functional oxides on-demand on silicon. PMID:26853112

  6. Lightweight optical mirrors formed in single crystal substrate

    NASA Technical Reports Server (NTRS)

    Bly, Vincent T. (Inventor)

    2006-01-01

    This invention is directed to a process for manufacturing a lightweight mirror from a single crystal material, such as single crystal silicon. As a near perfect single crystal material, single crystal silicon has much lower internal stress than a conventional material. This means much less distortion of the optical surface during the light weighting process. After being ground and polished, a single crystal silicon mirror is light weighted by removing material from the back side using ultrasonic machining. After the light weighting process, the single crystal silicon mirror may be used as-is or further figured by conventional polishing or ion milling, depending on the application and the operating wavelength.

  7. Growth of Solid Solution Single Crystals

    NASA Technical Reports Server (NTRS)

    Lehoczky, Sandor L.; Szofran, Frank R.; Gillies, Donald C.; Watring, Dale A.

    1999-01-01

    The objective of the study is to establish the effects of processing semiconducting, solid solution, single crystals in a microgravity environment on the metallurgical, compositional, electrical, and optical characteristics of the crystals. The alloy system being investigated is the solid solution semiconductor Hg(1-x)Cd(x)Te, with x-values appropriate for infrared detector applications in the 8 to 14 mm wavelength region. Both melt and Te-solvent growth are being performed. The study consists of an extensive ground-based experimental and theoretical research effort followed by flight experimentation where appropriate. The ground-based portion of the investigation also includes the evaluation of the relative effectiveness of stabilizing techniques, such as applied magnetic fields, for suppressing convective flow during the melt growth of the crystals.

  8. Optimizing Scale Adhesion on Single Crystal Superalloys

    NASA Technical Reports Server (NTRS)

    Smialek, James L.; Pint, Bruce A.

    2000-01-01

    To improve scale adhesion, single crystal superalloys have been desulfurized to levels below 1 ppmw by hydrogen annealing. A transition to fully adherent behavior has been shown to occur at a sulfur level of about 0.2 ppmw, as demonstrated for PWA 1480, PWA 1484, and Rene N5 single crystal superalloys in 1100-1150 C cyclic oxidation tests up to 2000 h. Small additions of yttrium (15 ppmw) also have been effective in producing adhesion for sulfur contents of about 5 ppmw. Thus the critical Y/S ratio required for adhesion was on the order of 3-to-1 by weight (1-to-1 atomic), in agreement with values estimated from solubility products for yttrium sulfides. While hydrogen annealing greatly improved an undoped alloy, yielding <= 0.01 ppmw S, it also produced benefits for Y-doped alloys without measurably reducing the sulfur content.

  9. Biomineralization of nanoscale single crystal hydroxyapatite.

    PubMed

    Omokanwaye, Tiffany; Wilson, Otto C; Gugssa, Ayelle; Anderson, Winston

    2015-11-01

    The chemical and physical characteristics of nanocrystalline hydroxyapatite particles which formed during the subcutaneous implantation of crab shell in Sprague-Dawley rats were studied using selected area electron diffraction (SAED) and high resolution transmission electron microscopy (HRTEM). The initial SAED characterization evidence indicated the presence of an amorphous calcium phosphate phase. The electron dense nanophase particles which formed in the wound healing zone displayed broad diffuse rings which usually indicate a low crystalline order or amorphous phase. High resolution transmission electron microscopy (HRTEM) revealed that these mineralized regions contained discrete single crystal particles less than 5nm in size. Micrographs taken at successively higher magnifications revealed very small nanoparticles with a hexagonal arrangement of ion channels with characteristic spacing of 0.54nm and 0.23nm. This study revealed that single crystal hydroxyapatite nanoparticles consisting of only a few unit cells formed via a biomineralization directed process. PMID:26249568

  10. Macrodeformation Twins in Single-Crystal Aluminum.

    PubMed

    Zhao, F; Wang, L; Fan, D; Bie, B X; Zhou, X M; Suo, T; Li, Y L; Chen, M W; Liu, C L; Qi, M L; Zhu, M H; Luo, S N

    2016-02-19

    Deformation twinning in pure aluminum has been considered to be a unique property of nanostructured aluminum. A lingering mystery is whether deformation twinning occurs in coarse-grained or single-crystal aluminum at scales beyond nanotwins. Here, we present the first experimental demonstration of macrodeformation twins in single-crystal aluminum formed under an ultrahigh strain rate (∼10^{6}  s^{-1}) and large shear strain (200%) via dynamic equal channel angular pressing. Large-scale molecular dynamics simulations suggest that the frustration of subsonic dislocation motion leads to transonic deformation twinning. Deformation twinning is rooted in the rate dependences of dislocation motion and twinning, which are coupled, complementary processes during severe plastic deformation under ultrahigh strain rates. PMID:26943543

  11. Biomineralization of nanoscale single crystal hydroxyapatite.

    PubMed

    Omokanwaye, Tiffany; Wilson, Otto C; Gugssa, Ayelle; Anderson, Winston

    2015-11-01

    The chemical and physical characteristics of nanocrystalline hydroxyapatite particles which formed during the subcutaneous implantation of crab shell in Sprague-Dawley rats were studied using selected area electron diffraction (SAED) and high resolution transmission electron microscopy (HRTEM). The initial SAED characterization evidence indicated the presence of an amorphous calcium phosphate phase. The electron dense nanophase particles which formed in the wound healing zone displayed broad diffuse rings which usually indicate a low crystalline order or amorphous phase. High resolution transmission electron microscopy (HRTEM) revealed that these mineralized regions contained discrete single crystal particles less than 5nm in size. Micrographs taken at successively higher magnifications revealed very small nanoparticles with a hexagonal arrangement of ion channels with characteristic spacing of 0.54nm and 0.23nm. This study revealed that single crystal hydroxyapatite nanoparticles consisting of only a few unit cells formed via a biomineralization directed process.

  12. Porosity evolution in a creeping single crystal

    NASA Astrophysics Data System (ADS)

    Srivastava, A.; Needleman, A.

    2012-04-01

    Experimental observations on tensile specimens in Srivastava et al (2012 in preparation) indicated that the growth of initially present processing induced voids in a nickel-based single crystal superalloy played a significant role in limiting creep life. Also, creep tests on single crystal superalloy specimens typically show greater creep strain rates and/or reduced creep life for thinner specimens than predicted by current theories. In order to quantify the role of void growth in single crystals in creep loading, we have carried out three-dimensional finite deformation finite element analyses of unit cells containing a single initially spherical void. The materials are characterized by a rate-dependent crystal plasticity constitutive relation accounting for primary and secondary creep. Two types of imposed loading are considered: an applied true stress (force/unit current area) that is time independent; and an applied nominal stress (force/unit initial area) that is time independent. Isothermal conditions are assumed. The evolution of porosity is calculated for various values of stress triaxiality and of the Lode parameter. The evolution of porosity with time is sensitive to whether constant true stress or constant nominal stress loading is applied. However, the evolution of porosity with the overall unit cell strain is insensitive to the mode of loading. At high values of stress triaxiality, the response is essentially independent of the value of the Lode parameter. At sufficiently low values of the stress triaxiality, the porosity evolution depends on the value of the Lode parameter and void collapse can occur. Also, rather large stress concentrations can develop which could play a role in the observed thickness dependence.

  13. Flexible single-crystal silicon nanomembrane photonic crystal cavity.

    PubMed

    Xu, Xiaochuan; Subbaraman, Harish; Chakravarty, Swapnajit; Hosseini, Amir; Covey, John; Yu, Yalin; Kwong, David; Zhang, Yang; Lai, Wei-Cheng; Zou, Yi; Lu, Nanshu; Chen, Ray T

    2014-12-23

    Flexible inorganic electronic devices promise numerous applications, especially in fields that could not be covered satisfactorily by conventional rigid devices. Benefits on a similar scale are also foreseeable for silicon photonic components. However, the difficulty in transferring intricate silicon photonic devices has deterred widespread development. In this paper, we demonstrate a flexible single-crystal silicon nanomembrane photonic crystal microcavity through a bonding and substrate removal approach. The transferred cavity shows a quality factor of 2.2×10(4) and could be bent to a curvature of 5 mm radius without deteriorating the performance compared to its counterparts on rigid substrates. A thorough characterization of the device reveals that the resonant wavelength is a linear function of the bending-induced strain. The device also shows a curvature-independent sensitivity to the ambient index variation.

  14. Anisotropy of sapphire single crystal sputtering

    SciTech Connect

    Minnebaev, K. F.; Tolpin, K. A.; Yurasova, V. E.

    2015-08-15

    We have studied the spatial distribution of particles sputtered from the base (0001) plane of a sapphire single crystal with trigonal crystalline lattice (α-Al{sub 2}O{sub 3}) that can be considered a superposition of two hexagonal close packed (hcp) structures–the ideal sublattice of oxygen and a somewhat deformed sublattice of aluminum. It is established that the particles sputtered from the base plane of sapphire are predominantly deposited along the sides of an irregular hexagon with spots at its vertices. The patterns of spots have been also studied for sputtering of particles from the (0001) face of a zinc single crystal with the hcp lattice. The spots of sputtered Zn atoms are arranged at the vertices of concentric equilateral hexagons. In both cases, the observed anisotropy of sputtering is related to focused collisions (direct and assisted focusing) and the channeling process. The chemical composition of spots has been determined in various regions of sputtered sapphire deposition. The results are discussed in comparison to analogous earlier data for secondary ion emission from an α-Al{sub 2}O{sub 3} single crystal.

  15. Charge transport in single crystal organic semiconductors

    NASA Astrophysics Data System (ADS)

    Xie, Wei

    Organic electronics have engendered substantial interest in printable, flexible and large-area applications thanks to their low fabrication cost per unit area, chemical versatility and solution processability. Nevertheless, fundamental understanding of device physics and charge transport in organic semiconductors lag somewhat behind, partially due to ubiquitous defects and impurities in technologically useful organic thin films, formed either by vacuum deposition or solution process. In this context, single-crystalline organic semiconductors, or organic single crystals, have therefore provided the ideal system for transport studies. Organic single crystals are characterized by their high chemical purity and outstanding structural perfection, leading to significantly improved electrical properties compared with their thin-film counterparts. Importantly, the surfaces of the crystals are molecularly flat, an ideal condition for building field-effect transistors (FETs). Progress in organic single crystal FETs (SC-FETs) is tremendous during the past decade. Large mobilities ~ 1 - 10 cm2V-1s-1 have been achieved in several crystals, allowing a wide range of electrical, optical, mechanical, structural, and theoretical studies. Several challenges still remain, however, which are the motivation of this thesis. The first challenge is to delineate the crystal structure/electrical property relationship for development of high-performance organic semiconductors. This thesis demonstrates a full spectrum of studies spanning from chemical synthesis, single crystal structure determination, quantum-chemical calculation, SC-OFET fabrication, electrical measurement, photoelectron spectroscopy characterization and extensive device optimization in a series of new rubrene derivatives, motivated by the fact that rubrene is a benchmark semiconductor with record hole mobility ~ 20 cm2V-1s-1. With successful preservation of beneficial pi-stacking structures, these rubrene derivatives form

  16. Single crystal x-ray diffraction: optical and micro hardness studies on chalcone derivative single crystal

    NASA Astrophysics Data System (ADS)

    Crasta, Vincent; Ravindrachary, V.; Bhajantri, R. F.; Naveen, S.; Shridar, M. A.; Shashidhara Prasad, J.

    2005-08-01

    1-(4-methylphenyl)-3-(4- N, N dimethyl amino phenyl)-2-propen-1-one, a chalcone derivative nonlinear optical material has been synthesized by standard method. FT-IR and NMR spectral studies have been performed to confirm the molecular structure of the synthesized compound. The single crystals up to a dimension of 13 x 9 x 3 mm3 were grown by slow evaporation method. The grown crystals were transparent in the entire visible region and absorbs in the UV-region. The refractive index has been measured using a He-Ne laser. The grown crystals have been subjected to single crystal X-ray diffraction studies to determine the crystal structure and hence the cell parameters of the crystal. From this study it is found that this compound crystallizes in orthorhombic system with a space group P212121 and corresponding lattice parameters are, a = 7.3610(13) Å, b = 11.651(2) Å, c = 17.6490(17) Å. The Kurtz powder second harmonic generation test shows that the compound is a potential candidate for Photonic application. The micro hardness test on these crystals were carried out and the load dependence hardness was observed

  17. Sponge-like nanoporous single crystals of gold

    NASA Astrophysics Data System (ADS)

    Khristosov, Maria Koifman; Bloch, Leonid; Burghammer, Manfred; Kauffmann, Yaron; Katsman, Alex; Pokroy, Boaz

    2015-11-01

    Single crystals in nature often demonstrate fascinating intricate porous morphologies rather than classical faceted surfaces. We attempt to grow such crystals, drawing inspiration from biogenic porous single crystals. Here we show that nanoporous single crystals of gold can be grown with no need for any elaborate fabrication steps. These crystals are found to grow following solidification of a eutectic composition melt that forms as a result of the dewetting of nanometric thin films. We also present a kinetic model that shows how this nano-porous single-crystalline structure can be obtained, and which allows the potential size of the porous single crystal to be predicted. Retaining their single-crystalline nature is due to the fact that the full crystallization process is faster than the average period between two subsequent nucleation events. Our findings clearly demonstrate that it is possible to form single-crystalline nano porous metal crystals in a controlled manner.

  18. Sponge-like nanoporous single crystals of gold.

    PubMed

    Khristosov, Maria Koifman; Bloch, Leonid; Burghammer, Manfred; Kauffmann, Yaron; Katsman, Alex; Pokroy, Boaz

    2015-01-01

    Single crystals in nature often demonstrate fascinating intricate porous morphologies rather than classical faceted surfaces. We attempt to grow such crystals, drawing inspiration from biogenic porous single crystals. Here we show that nanoporous single crystals of gold can be grown with no need for any elaborate fabrication steps. These crystals are found to grow following solidification of a eutectic composition melt that forms as a result of the dewetting of nanometric thin films. We also present a kinetic model that shows how this nano-porous single-crystalline structure can be obtained, and which allows the potential size of the porous single crystal to be predicted. Retaining their single-crystalline nature is due to the fact that the full crystallization process is faster than the average period between two subsequent nucleation events. Our findings clearly demonstrate that it is possible to form single-crystalline nano porous metal crystals in a controlled manner. PMID:26554856

  19. Sponge-like nanoporous single crystals of gold.

    PubMed

    Khristosov, Maria Koifman; Bloch, Leonid; Burghammer, Manfred; Kauffmann, Yaron; Katsman, Alex; Pokroy, Boaz

    2015-11-10

    Single crystals in nature often demonstrate fascinating intricate porous morphologies rather than classical faceted surfaces. We attempt to grow such crystals, drawing inspiration from biogenic porous single crystals. Here we show that nanoporous single crystals of gold can be grown with no need for any elaborate fabrication steps. These crystals are found to grow following solidification of a eutectic composition melt that forms as a result of the dewetting of nanometric thin films. We also present a kinetic model that shows how this nano-porous single-crystalline structure can be obtained, and which allows the potential size of the porous single crystal to be predicted. Retaining their single-crystalline nature is due to the fact that the full crystallization process is faster than the average period between two subsequent nucleation events. Our findings clearly demonstrate that it is possible to form single-crystalline nano porous metal crystals in a controlled manner.

  20. Oriented single-crystal-to-single-crystal phase transition with dramatic changes in the dimensions of crystals.

    PubMed

    Liu, Guangfeng; Liu, Jie; Liu, Yang; Tao, Xutang

    2014-01-15

    We report here a new polymorph of cocrystal CuQ2-TCNQ that shows an oriented single-crystal-to-single-crystal phase transition along its a-axis at ambient conditions. Upon mechanical stimulation, it converts into another polymorph accompanied by almost doubling its length and halving its thickness. Our crystallographic studies indicate the dramatic changes in crystal dimensions resulted from the prominent changes of molecular stacking patterns. A reasonable mechanism for the phenomenon was proposed on the basis of the structural, microscopic, and thermal analysis.

  1. Direct Shear of Olivine Single Crystals

    NASA Astrophysics Data System (ADS)

    Tielke, Jacob; Zimmerman, Mark; Kohlstedt, David

    2016-04-01

    Knowledge of the strength of individual dislocation slip systems in olivine is fundamental to understanding the flow behavior and the development of lattice-preferred orientation in olivine-rich rocks. The most direct measurements of the strengths of individual slip systems are from triaxial compression experiments on olivine single crystals. However, such experiments only allow for determination of flow laws for two of the four dominate slip systems in olivine. In order to measure the strengths of the (001)[100] and (100)[001] slip systems independently, we performed deformation experiments on single crystals of San Carlos olivine in a direct shear geometry. Experiments were carried out at temperatures of 1000° to 1300°C, a confining pressure of 300 MPa, shear stresses of 60 to 334 MPa, and resultant shear strain rates of 7.4 x 10‑6 to 6.7 x 10‑4 s‑1. At high-temperature (≥1200°C) and low-stress (≤200 MPa) conditions, the strain rate of crystals oriented for direct shear on either the (001)[100] or the (100)[001] slip system follows a power law relationship with stress, whereas at lower temperatures and higher stresses, strain rate depends exponentially on stress. The flow laws derived from the mechanical data in this study are consistent with a transition from the operation of a climb-controlled dislocation mechanism during power-law creep to the operation of a glide-controlled dislocation mechanism during exponential creep. In the climb-controlled regime, crystals oriented for shear on the (001)[100] slip system are weaker than crystals orientated for shear on the (100)[001] slip system. In contrast, in the glide-controlled regime the opposite is observed. Extrapolation of flow laws determined for crystals sheared in orientations favorable for slip on these two slip systems to upper mantle conditions reveals that the (001)[100] slip system is weaker at temperatures and stresses that are typical of the asthenospheric mantle, whereas the (100

  2. Chemical vapor deposition of graphene single crystals.

    PubMed

    Yan, Zheng; Peng, Zhiwei; Tour, James M

    2014-04-15

    As a two-dimensional (2D) sp(2)-bonded carbon allotrope, graphene has attracted enormous interest over the past decade due to its unique properties, such as ultrahigh electron mobility, uniform broadband optical absorption and high tensile strength. In the initial research, graphene was isolated from natural graphite, and limited to small sizes and low yields. Recently developed chemical vapor deposition (CVD) techniques have emerged as an important method for the scalable production of large-size and high-quality graphene for various applications. However, CVD-derived graphene is polycrystalline and demonstrates degraded properties induced by grain boundaries. Thus, the next critical step of graphene growth relies on the synthesis of large graphene single crystals. In this Account, we first discuss graphene grain boundaries and their influence on graphene's properties. Mechanical and electrical behaviors of CVD-derived polycrystalline graphene are greatly reduced when compared to that of exfoliated graphene. We then review four representative pathways of pretreating Cu substrates to make millimeter-sized monolayer graphene grains: electrochemical polishing and high-pressure annealing of Cu substrate, adding of additional Cu enclosures, melting and resolidfying Cu substrates, and oxygen-rich Cu substrates. Due to these pretreatments, the nucleation site density on Cu substrates is greatly reduced, resulting in hexagonal-shaped graphene grains that show increased grain domain size and comparable electrical properties as to exfoliated graphene. Also, the properties of graphene can be engineered by its shape, thickness and spatial structure. Thus, we further discuss recently developed methods of making graphene grains with special spatial structures, including snowflakes, six-lobed flowers, pyramids and hexagonal graphene onion rings. The fundamental growth mechanism and practical applications of these well-shaped graphene structures should be interesting topics and

  3. Conduction mechanism of single-crystal alumina

    NASA Technical Reports Server (NTRS)

    Will, Fritz G.; Delorenzi, Horst G.; Janora, Kevin H.

    1992-01-01

    The fully guarded three-terminal technique was used to perform conductivity measurements on single-crystal alumina at temperatures of 400-1300 C. The conductivity was also determined as a function of time at various temperatures and applied fields. Further, the fractions of the current carried by Al and O ions (ionic transference numbers) were determined from long-term transference experiments in the temperature range 1100-1300 C. A mathematical model of the conduction mechanism is proposed, and model predictions are compared with experimental results.

  4. Thermodynamic forces in single crystals with dislocations

    NASA Astrophysics Data System (ADS)

    Van Goethem, Nicolas

    2014-06-01

    A simple model for the evolution of macroscopic dislocation regions in a single crystal is presented. This model relies on maximal dissipation principle within Kröner's geometric description of the dislocated crystal. Mathematical methods and tools from shape optimization theory provide equilibrium relations at the dislocation front, similarly to previous work achieved on damage modelling (J Comput Phys 33(16):5010-5044, 2011). The deformation state variable is the incompatible strain as related to the dislocation density tensor by a relation involving the Ricci curvature of the crystal underlying elastic metric. The time evolution of the model variables follows from a novel interpretation of the Einstein-Hilbert flow in terms of dislocation microstructure energy. This flow is interpreted as the dissipation of non-conservative dislocations, due to the climb mechanism, modelled by an average effect of mesoscopic dislocations moving normal to their glide planes by adding or removing points defects. The model equations are a fourth-order tensor parabolic equation involving the operator "incompatibility," here appearing as a tensorial counterpart of the scalar Laplacian. This work encompasses and generalizes results previously announced (C R Acad Sci Paris Ser I 349:923-927, 2011), with in addition a series of physical interpretations to give a meaning to the newly introduced concepts.

  5. Fabrication of crystals from single metal atoms

    PubMed Central

    Barry, Nicolas P. E.; Pitto-Barry, Anaïs; Sanchez, Ana M.; Dove, Andrew P.; Procter, Richard J.; Soldevila-Barreda, Joan J.; Kirby, Nigel; Hands-Portman, Ian; Smith, Corinne J.; O’Reilly, Rachel K.; Beanland, Richard; Sadler, Peter J.

    2014-01-01

    Metal nanocrystals offer new concepts for the design of nanodevices with a range of potential applications. Currently the formation of metal nanocrystals cannot be controlled at the level of individual atoms. Here we describe a new general method for the fabrication of multi-heteroatom-doped graphitic matrices decorated with very small, ångström-sized, three-dimensional (3D)-metal crystals of defined size. We irradiate boron-rich precious-metal-encapsulated self-spreading polymer micelles with electrons and produce, in real time, a doped graphitic support on which individual osmium atoms hop and migrate to form 3D-nanocrystals, as small as 15 Å in diameter, within 1 h. Crystal growth can be observed, quantified and controlled in real time. We also synthesize the first examples of mixed ruthenium–osmium 3D-nanocrystals. This technology not only allows the production of ångström-sized homo- and hetero-crystals, but also provides new experimental insight into the dynamics of nanocrystals and pathways for their assembly from single atoms. PMID:24861089

  6. Fabrication of crystals from single metal atoms.

    PubMed

    Barry, Nicolas P E; Pitto-Barry, Anaïs; Sanchez, Ana M; Dove, Andrew P; Procter, Richard J; Soldevila-Barreda, Joan J; Kirby, Nigel; Hands-Portman, Ian; Smith, Corinne J; O'Reilly, Rachel K; Beanland, Richard; Sadler, Peter J

    2014-01-01

    Metal nanocrystals offer new concepts for the design of nanodevices with a range of potential applications. Currently the formation of metal nanocrystals cannot be controlled at the level of individual atoms. Here we describe a new general method for the fabrication of multi-heteroatom-doped graphitic matrices decorated with very small, ångström-sized, three-dimensional (3D)-metal crystals of defined size. We irradiate boron-rich precious-metal-encapsulated self-spreading polymer micelles with electrons and produce, in real time, a doped graphitic support on which individual osmium atoms hop and migrate to form 3D-nanocrystals, as small as 15 Å in diameter, within 1 h. Crystal growth can be observed, quantified and controlled in real time. We also synthesize the first examples of mixed ruthenium-osmium 3D-nanocrystals. This technology not only allows the production of ångström-sized homo- and hetero-crystals, but also provides new experimental insight into the dynamics of nanocrystals and pathways for their assembly from single atoms.

  7. Biaxial constitutive equation development for single crystals

    NASA Technical Reports Server (NTRS)

    Jordan, E. H.

    1984-01-01

    Current gas turbine engines utilize large single crystal superalloy components in the hot section. Structural analysis of these components requires a valid stress strain temperature constitutive equation. The goal of the program described is to create one or more models and verify these models. A constitutive equation based on an assumed slip behavior of a single slip system was formulated, programmed, and debugged. Specifically, the basic theory for a model based on aggravating slip behavior on individual slip systems was formulated and programmed and some simulations were run using assumed values of constants. In addition, a formulation allowing strain controlled simulations was completed. An approach to structural analysis of the specimen was developed. This approach uses long tube consistancy conditions and finite elements specially formulated to take advantage of the symmetry of 100 oriented specimens.

  8. Cutting fluid study for single crystal silicon

    SciTech Connect

    Chargin, D.

    1998-05-05

    An empirical study was conducted to evaluate cutting fluids for Single Point Diamond Turning (SPDT) of single crystal silicon. The pH of distilled waster was adjusted with various additives the examine the effect of pH on cutting operations. Fluids which seemed to promote ductile cutting appeared to increase tool wear as well, an undesirable tradeoff. High Ph sodium hydroxide solutions showed promise for further research, as they yielded the best combination of reduced tool wear and good surface finish in the ductile regime. Negative rake tools were verified to improve the surface finish, but the negative rake tools used in the experiments also showed much higher wear than conventional 0{degree} rake tools. Effects of crystallographic orientation on SPDT, such as star patterns of fracture damage forming near the center of the samples, were observed to decrease with lower feedrates. Silicon chips were observed and photographed, indicative of a ductile materials removal process.

  9. Hemoglobin (image)

    MedlinePlus

    Hemoglobin is the most important component of red blood cells. It is composed of a protein called ... exchanged for carbon dioxide. Abnormalities of an individual's hemoglobin value can indicate defects in the normal balance ...

  10. Growth and surface topography of WSe2 single crystal

    NASA Astrophysics Data System (ADS)

    Dixit, Vijay; Vyas, Chirag; Pataniya, Pratik; Jani, Mihir; Pathak, Vishal; Patel, Abhishek; Pathak, V. M.; Patel, K. D.; Solanki, G. K.

    2016-05-01

    Tungsten Di-Selenide belongs to the family of TMDCs showing their potential applications in the fields of Optoelectronics and PEC solar cells. Here in the present investigation single crystals of WSe2 were grown by Direct Vapour Transport Technique in a dual zone furnace having temperature difference of 50 K between the two zones. These single crystals were characterized by EDAX which confirms the stiochiometry of the grown crystals. Surface topography of the crystal was studied by optical micrograph showing the left handed spirals on the surface of WSe2 crystals. Single crystalline nature of the crystals was confirmed by SAED.

  11. Magnetic anisotropy in pyroxene single crystals

    NASA Astrophysics Data System (ADS)

    Biedermann, Andrea Regina; Hirt, Ann Marie; Pettke, Thomas; Bender Koch, Christian

    2014-05-01

    Anisotropy of magnetic susceptibility (AMS) is often used as a proxy for the mineral fabric in a rock. This requires understanding the intrinsic magnetic anisotropy of the minerals that define the rock fabric. With their prismatic habit, pyroxenes describe the texture in mafic and ultramafic rocks. Magnetic anisotropy in pyroxene crystals often arises from both paramagnetic and ferromagnetic components that can be separated from high-field magnetic data. The paramagnetic component is related to the silicate lattice, whereas the ferromagnetic part arises from the magnetic properties of ferromagnetic inclusions that were further characterized by isothermal remanent magnetization measurements. These inclusions often have needle-like habit and are located on the well-defined cleavage planes within the pyroxenes. We characterize low-field and high-field AMS in pyroxene single crystals of diverse orthopyroxene and clinopyroxene minerals. In addition to the magnetic measurements, we analyzed their chemical composition and Fe2+/Fe3+ distribution. The anisotropy arising from inclusions in some augite crystals displays consistent principal susceptibility directions, whereas no preferred orientation is found in other crystals. The principal susceptibilities of the paramagnetic component can be related to the crystal lattice, with the intermediate susceptibility parallel to the b-axis, and minimum and maximum in the a-c-plane for diopside, augite and spodumene. The degree of anisotropy increases with iron concentration. Aegirine shows a different behavior; not only is its maximum susceptibility parallel to the c-axis, but the anisotropy degree is also lower in relation to its iron concentration. This possibly relates to a predominance of Fe3+ in aegirine, whereas Fe2+ is dominant in the other minerals. In orthopyroxene, the maximum susceptibility is parallel to the c-axis and the minimum is parallel to b. The degree of anisotropy increases linearly with iron concentration. The

  12. Oscillatory reactions on single crystal surfaces

    NASA Astrophysics Data System (ADS)

    Imbihl, R.

    1993-12-01

    Heterogeneous catalytic reactions exhibit under certain conditions kinetic oscillations which have been investigated both with polycrystalline materials and with single crystal surfaces as catalysts. The present paper reviews single-crystal experiments conducted under isothermal, low pressure conditions ( p < 10 -3 mbar). Two different reaction systems have been investigated: catalytic CO oxidation on various Pt and Pd orientations and catalytic NO reduction on Pt(100) using CO, H 2, or NH 3 as the reducing agent. The different reaction systems exhibit a wide variety of interesting phenomena which are well-known in nonlinear dynamics, for example, such as spatiotemporal pattern formation, the existence of Turing structures and the appearance of deterministic chaos, and chemical turbulence. The mechanistic steps leading to the observed phenomena have been investigated and appropriate mathematical models have been formulated and analyzed using bifurcation theory. The driving force for the rate oscillations has been shown to result from structural changes of the substrate in the case of catalytic CO oxidation on Pt surfaces, subsurface oxygen formation in the case of catalytic CO oxidation on Pd surfaces, and in the chemical reaction network described by a vacancy model in the case of the NO reduction reactions.

  13. Growing single crystals in silica gel

    NASA Technical Reports Server (NTRS)

    Rubin, B.

    1970-01-01

    Two types of chemical reactions for crystal growing are discussed. The first is a metathetical reaction to produce calcium tartrate tetrahydrate crystals, the second is a decomplexation reaction to produce cuprous chloride crystals.

  14. Recombinant Escherichia coli strains with inducible Campylobacter jejuni single domain hemoglobin CHb expression exhibited improved cell growth in bioreactor culture.

    PubMed

    Xu, Li; Xiong, Wei; Yang, Jiang-Ke; Li, Jia; Tao, Xing-Wu

    2015-01-01

    Maintaining an appropriate concentration of dissolved oxygen in aqueous solution is critical for efficient operation of a bioreactor, requiring sophisticated engineering design and a system of regulation to maximize oxygen transfer from the injected air bubbles to the cells. Bacterial hemoglobins are oxygen-binding proteins that transfer oxygen from the environment to metabolic processes and allow bacteria to grow even under microaerophilic conditions. To improve the oxygen utilization efficiency of cells and overcome the oxygen shortage in bioreactors, the gene coding for the Campylobacter jejuni single domain hemoglobin (CHb) gene was artificially synthesized and functionally expressed under the control of inducible expression promoters PT7 and Pvgh in Escherichia coli. The effects of the recombinants PT7-CHb and Pvgh-CHb on cell growth were evaluated in aerobic shake flasks, anaerobic capped bottles and a 5-L bioreactor, and a pronounced improvement in cell biomass was observed for CHb-expressing cells. To determine the growth curves, CHb gene expression, and CHb oxygen-binding capacity of specific recombinants with different promoters, we determined the time course of CHb gene expression in the two recombinants by semi-quantitative RT-PCR and CO differential spectrum assays. Based on the growth patterns of the two recombinants in the bioreactor, we proposed different recombinant types with optimal performance under specific culture conditions.

  15. Growth of single crystals of BaFe12O19 by solid state crystal growth

    NASA Astrophysics Data System (ADS)

    Fisher, John G.; Sun, Hengyang; Kook, Young-Geun; Kim, Joon-Seong; Le, Phan Gia

    2016-10-01

    Single crystals of BaFe12O19 are grown for the first time by solid state crystal growth. Seed crystals of BaFe12O19 are buried in BaFe12O19+1 wt% BaCO3 powder, which are then pressed into pellets containing the seed crystals. During sintering, single crystals of BaFe12O19 up to ∼130 μm thick in the c-axis direction grow on the seed crystals by consuming grains from the surrounding polycrystalline matrix. Scanning electron microscopy-energy dispersive spectroscopy analysis shows that the single crystal and the surrounding polycrystalline matrix have the same chemical composition. Micro-Raman scattering shows the single crystal to have the BaFe12O19 structure. The optimum growth temperature is found to be 1200 °C. The single crystal growth behavior is explained using the mixed control theory of grain growth.

  16. Piezoelectric single crystals for ultrasonic transducers in biomedical applications.

    PubMed

    Zhou, Qifa; Lam, Kwok Ho; Zheng, Hairong; Qiu, Weibao; Shung, K Kirk

    2014-10-01

    Piezoelectric single crystals, which have excellent piezoelectric properties, have extensively been employed for various sensors and actuators applications. In this paper, the state-of-art in piezoelectric single crystals for ultrasonic transducer applications is reviewed. Firstly, the basic principles and design considerations of piezoelectric ultrasonic transducers will be addressed. Then, the popular piezoelectric single crystals used for ultrasonic transducer applications, including LiNbO3 (LN), PMN-PT and PIN-PMN-PT, will be introduced. After describing the preparation and performance of the single crystals, the recent development of both the single-element and array transducers fabricated using the single crystals will be presented. Finally, various biomedical applications including eye imaging, intravascular imaging, blood flow measurement, photoacoustic imaging, and microbeam applications of the single crystal transducers will be discussed. PMID:25386032

  17. Piezoelectric single crystals for ultrasonic transducers in biomedical applications.

    PubMed

    Zhou, Qifa; Lam, Kwok Ho; Zheng, Hairong; Qiu, Weibao; Shung, K Kirk

    2014-10-01

    Piezoelectric single crystals, which have excellent piezoelectric properties, have extensively been employed for various sensors and actuators applications. In this paper, the state-of-art in piezoelectric single crystals for ultrasonic transducer applications is reviewed. Firstly, the basic principles and design considerations of piezoelectric ultrasonic transducers will be addressed. Then, the popular piezoelectric single crystals used for ultrasonic transducer applications, including LiNbO3 (LN), PMN-PT and PIN-PMN-PT, will be introduced. After describing the preparation and performance of the single crystals, the recent development of both the single-element and array transducers fabricated using the single crystals will be presented. Finally, various biomedical applications including eye imaging, intravascular imaging, blood flow measurement, photoacoustic imaging, and microbeam applications of the single crystal transducers will be discussed.

  18. Experimental dynamic metamorphism of mineral single crystals

    USGS Publications Warehouse

    Kirby, S.H.; Stern, L.A.

    1993-01-01

    This paper is a review of some of the rich and varied interactions between non-hydrostatic stress and phase transformations or mineral reactions, drawn mainly from results of experiments done on mineral single crystals in our laboratory or our co-authors. The state of stress and inelastic deformation can enter explicitly into the equilibrium phase relations and kinetics of mineral reactions. Alternatively, phase transformations can have prominent effects on theology and on the nature of inelastic deformation. Our examples represent five types of structural phase changes, each of which is distinguished by particular mechanical effects. In increasing structural complexity, these include: (1) displacive phase transformations involving no bond-breaking, which may produce anomalous brittle behavior. A primary example is the a-?? quartz transition which shows anomalously low fracture strength and tertiary creep behavior near the transition temperature; (2) martensitic-like transformations involving transformation strains dominated by shear deformation. Examples include the orthoenstatite ??? clinoenstatite and w u ??rtzite ??? sphalerite transformations; (3) coherent exsolution or precipitation of a mineral solute from a supersaturated solid-solution, with anisotropy of precipitation and creep rates produced under nonhydrostatic stress. Examples include exsolution of corundum from MgO ?? nAl2O3 spinels and Ca-clinopyroxene from orthopyroxene; (4) order-disorder transformations that are believed to cause anomalous plastic yield strengthening, such as MgO - nAl2O3 spinels; and (5) near-surface devolatilization of hydrous silicate single-crystals that produces a fundamental brittleness thought to be connected with dehydration at microcracks at temperatures well below nominal macroscopic dehydration temperatures. As none of these interactions between single-crystal phase transformations and non-hydrostatic stress is understood in detail, this paper serves as a challenge to

  19. Solar cell structure incorporating a novel single crystal silicon material

    DOEpatents

    Pankove, Jacques I.; Wu, Chung P.

    1983-01-01

    A novel hydrogen rich single crystal silicon material having a band gap energy greater than 1.1 eV can be fabricated by forming an amorphous region of graded crystallinity in a body of single crystalline silicon and thereafter contacting the region with atomic hydrogen followed by pulsed laser annealing at a sufficient power and for a sufficient duration to recrystallize the region into single crystal silicon without out-gassing the hydrogen. The new material can be used to fabricate semiconductor devices such as single crystal silicon solar cells with surface window regions having a greater band gap energy than that of single crystal silicon without hydrogen.

  20. Submicron diameter single crystal sapphire optical fiber

    SciTech Connect

    Hill, Cary; Homa, Daniel; Liu, Bo; Yu, Zhihao; Wang, Anbo; Pickrell, Gary

    2014-10-02

    In this work, a submicron-diameter single crystal sapphire optical fiber was demonstrated via wet acid etching at elevated temperatures. Etch rates on the order 2.3 µm/hr were achievable with a 3:1 molar ratio sulfuric-phosphoric acid solution maintained at a temperature of 343°C. A sapphire fiber with an approximate diameter of 800 nm was successfully fabricated from a commercially available fiber with an original diameter of 50 µm. The simple and controllable etching technique provides a feasible approach to the fabrication of unique waveguide structures via traditional silica masking techniques. The ability to tailor the geometry of sapphire optical fibers is the first step in achieving optical and sensing performance on par with its fused silica counterpart.

  1. Submicron diameter single crystal sapphire optical fiber

    DOE PAGES

    Hill, Cary; Homa, Daniel; Liu, Bo; Yu, Zhihao; Wang, Anbo; Pickrell, Gary

    2014-10-02

    In this work, a submicron-diameter single crystal sapphire optical fiber was demonstrated via wet acid etching at elevated temperatures. Etch rates on the order 2.3 µm/hr were achievable with a 3:1 molar ratio sulfuric-phosphoric acid solution maintained at a temperature of 343°C. A sapphire fiber with an approximate diameter of 800 nm was successfully fabricated from a commercially available fiber with an original diameter of 50 µm. The simple and controllable etching technique provides a feasible approach to the fabrication of unique waveguide structures via traditional silica masking techniques. The ability to tailor the geometry of sapphire optical fibers ismore » the first step in achieving optical and sensing performance on par with its fused silica counterpart.« less

  2. Halide electroadsorption on single crystal surfaces

    SciTech Connect

    Ocko, B.M.; Wandlowski, T.

    1997-07-01

    The structure and phase behavior of halides have been investigated on single crystals of Ag and Au using synchrotron x-ray scattering techniques. The adlayer coverages are potential dependent. For all halides studied the authors found that with increasing potential, at a critical potential, a disordered adlayer transforms into an ordered structure. Often these ordered phases are incommensurate and exhibit potential-dependent lateral separations (electrocompression). The authors have analyzed the electrocompression in terms of a model which includes lateral interactions and partial charge. A continuous compression is not observed for Br on Ag(100). Rather, they find that the adsorption is site-specific (lattice gas) in both the ordered and disordered phases. The coverage increases with increasing potential and at a critical potential the disordered phase transforms to a well-ordered commensurate structure.

  3. Method of Making Lightweight, Single Crystal Mirror

    NASA Technical Reports Server (NTRS)

    Bly, Vincent T. (Inventor)

    2015-01-01

    A method of making a mirror from a single crystal blank may include fine grinding top and bottom surfaces of the blank to be parallel. The blank may then be heat treated to near its melting temperature. An optical surface may be created on an optical side of the blank. A protector may be bonded to the optical surface. With the protector in place, the blank may be light weighted by grinding a non-optical surface of the blank using computer controlled grinding. The light weighting may include creating a structure having a substantially minimum mass necessary to maintain distortion of the mirror within a preset limit. A damaged layer of the non-optical surface caused by light weighting may be removed with an isotropic etch and/or repaired by heat treatment. If an oxide layer is present, the entire blank may then be etched using, for example, hydrofluoric acid. A reflecting coating may be deposited on the optical surface.

  4. Electrical switching in cadmium boracite single crystals

    NASA Technical Reports Server (NTRS)

    Takahashi, T.; Yamada, O.

    1981-01-01

    Cadmium boracite single crystals at high temperatures ( 300 C) were found to exhibit a reversible electric field-induced transition between a highly insulative and a conductive state. The switching threshold is smaller than a few volts for an electrode spacing of a few tenth of a millimeter corresponding to an electric field of 100 to 1000 V/cm. This is much smaller than the dielectric break-down field for an insulator such as boracite. The insulative state reappears after voltage removal. A pulse technique revealed two different types of switching. Unstable switching occurs when the pulse voltage slightly exceeds the switching threshold and is characterized by a pre-switching delay and also a residual current after voltage pulse removal. A stable type of switching occurs when the voltage becomes sufficiently high. Possible device applications of this switching phenomenon are discussed.

  5. Single-crystal superalloy drives turbine advances

    SciTech Connect

    Harris, K.

    1995-04-01

    In searching for ways to improve power-to-weight ratios and fuel efficiency, gas turbine engine manufacturers invest heavily in the development and testing of new alloys. Their goal is to find turbine airfoil materials that can handle the higher operating temperatures, increased component stresses, and faster rotational speeds that are needed to increase turbine performance. Major turbine engine manufacturers find they can achieve these objectives through ultra-high performance, single-crystal superalloys -- a group of nickel-base materials that exhibit outstanding strength and surface stability at temperatures up to 85{percent} of their melting points. One such superalloy is CMSX-4, co-engineered by ingot maker Cannon-Muskegon and turbine engine manufacturers Rolls-Royce and Allison Engine Company. It is currently being used in such applications as Allison`s advanced airfoil programs.

  6. Thermal debracketing of single crystal sapphire brackets.

    PubMed

    Rueggeberg, F A; Lockwood, P E

    1992-01-01

    Because of their optical clarity, single crystal sapphire brackets provide an esthetic advantage over many other types of orthodontic brackets. However, debonding of these brackets has caused iatrogenic damage to enamel. Thermal debonding has been proposed for use in removing sapphire brackets without causing damage to teeth. This study determined the temperature required at the enamel/resin interface to thermally debond sapphire brackets from etched bovine enamel using 23 different commercially available orthodontic resins and one experimental product. The results indicate a wide range of debonding temperatures for the various resins. As a group, the powder-liquid materials had a statistically lower debonding temperature than the two-paste, the no-mix products, or the light-cured materials, for which the temperatures were all similar. This paper presents relative information a clinician can use in selecting an orthodontic bonding resin to minimize thermal damage to the teeth while debonding sapphire brackets.

  7. Hydrogen Annealing Of Single-Crystal Superalloys

    NASA Technical Reports Server (NTRS)

    Smialek, James L.; Schaeffer, John C.; Murphy, Wendy

    1995-01-01

    Annealing at temperature equal to or greater than 2,200 degrees F in atmosphere of hydrogen found to increase ability of single-crystal superalloys to resist oxidation when subsequently exposed to oxidizing atmospheres at temperatures almost as high. Supperalloys in question are principal constituents of hot-stage airfoils (blades) in aircraft and ground-based turbine engines; also used in other high-temperature applications like chemical-processing plants, coal-gasification plants, petrochemical refineries, and boilers. Hydrogen anneal provides resistance to oxidation without decreasing fatigue strength and without need for coating or reactive sulfur-gettering constituents. In comparison with coating, hydrogen annealing costs less. Benefits extend to stainless steels, nickel/chromium, and nickel-base alloys, subject to same scale-adhesion and oxidation-resistance considerations, except that scale is chromia instead of alumina.

  8. Low-cobalt single crystal Rene 150

    NASA Technical Reports Server (NTRS)

    Scheuermann, C. M.

    1982-01-01

    The effects of cobalt content on a single crystal version of the advanced, high gamma prime content turbine airfoil alloy Rene 150 were investigated. Cobalt contents under investigation include 12 wt.% (composition level of Rene 150), 6 wt.%, and 0 wt.%. Preliminary test results are presented and compared with the properties of standard DS Rene 150. DTA results indicate that the liquidus goes through a maximum of about 1435 C near 6 wt.% Co. The solidus remains essentially constant at 1390 C with decreasing Co content. The gamma prime solvus appears to go through a minimum of about 1235 C near 6 wt.% Co content. Preliminary as-cast tensile and stress rupture results are presented along with heat treat schedules and future test plans.

  9. A simple low-cost single-crystal NMR setup.

    PubMed

    Vinding, Mads S; Kessler, Tommy O; Vosegaard, Thomas

    2016-08-01

    A low-cost single-crystal NMR kit is presented along with a web-based post-processing software. The kit consists of a piezo-crystal motor and a goniometer for the crystal, both embedded in a standard wide-bore NMR probe with a 3D printed scaffold. The NMR pulse program controls the angle setting automatically, and the post-processing software incorporates a range of orientation-angle discrepancies present in the kit and other single-crystal setups. Results with a NaNO3 single-crystal show a high degree of reproducibility and excellent agreement with previous findings for the anisotropic quadrupolar interaction.

  10. A simple low-cost single-crystal NMR setup

    NASA Astrophysics Data System (ADS)

    Vinding, Mads S.; Kessler, Tommy O.; Vosegaard, Thomas

    2016-08-01

    A low-cost single-crystal NMR kit is presented along with a web-based post-processing software. The kit consists of a piezo-crystal motor and a goniometer for the crystal, both embedded in a standard wide-bore NMR probe with a 3D printed scaffold. The NMR pulse program controls the angle setting automatically, and the post-processing software incorporates a range of orientation-angle discrepancies present in the kit and other single-crystal setups. Results with a NaNO3 single-crystal show a high degree of reproducibility and excellent agreement with previous findings for the anisotropic quadrupolar interaction.

  11. Piezoelectric single crystals for ultrasonic transducers in biomedical applications

    PubMed Central

    Zhou, Qifa; Lam, Kwok Ho; Zheng, Hairong; Qiu, Weibao; Shung, K. Kirk

    2014-01-01

    Piezoelectric single crystals, which have excellent piezoelectric properties, have extensively been employed for various sensors and actuators applications. In this paper, the state–of–art in piezoelectric single crystals for ultrasonic transducer applications is reviewed. Firstly, the basic principles and design considerations of piezoelectric ultrasonic transducers will be addressed. Then, the popular piezoelectric single crystals used for ultrasonic transducer applications, including LiNbO3 (LN), PMN–PT and PIN–PMN–PT, will be introduced. After describing the preparation and performance of the single crystals, the recent development of both the single–element and array transducers fabricated using the single crystals will be presented. Finally, various biomedical applications including eye imaging, intravascular imaging, blood flow measurement, photoacoustic imaging, and microbeam applications of the single crystal transducers will be discussed. PMID:25386032

  12. Functionalizing single crystals: incorporation of nanoparticles inside gel-grown calcite crystals.

    PubMed

    Liu, Yujing; Yuan, Wentao; Shi, Ye; Chen, Xiaoqiang; Wang, Yong; Chen, Hongzheng; Li, Hanying

    2014-04-14

    Synthetic single crystals are usually homogeneous solids. Biogenic single crystals, however, can incorporate biomacromolecules and become inhomogeneous solids so that their properties are also extrinsically regulated by the incorporated materials. The discrepancy between the properties of synthetic and biogenic single crystals leads to the idea to modify the internal structure of synthetic crystals to achieve nonintrinsic properties by incorporation of foreign material. Intrinsically colorless and diamagnetic calcite single crystals are turned into colored and paramagnetic solids, through incorporation of Au and Fe3O4 nanoparticles without significantly disrupting the crystalline lattice of calcite. The crystals incorporate the nanoparticles and gel fibers when grown in agarose gel media containing the nanoparticles, whereas the solution-grown crystals do not. As such, our work extends the long-history gel method for crystallization into a platform to functionalize single-crystalline materials.

  13. Formation of curved micrometer-sized single crystals.

    PubMed

    Koifman Khristosov, Maria; Kabalah-Amitai, Lee; Burghammer, Manfred; Katsman, Alex; Pokroy, Boaz

    2014-05-27

    Crystals in nature often demonstrate curved morphologies rather than classical faceted surfaces. Inspired by biogenic curved single crystals, we demonstrate that gold single crystals exhibiting curved surfaces can be grown with no need of any fabrication steps. These single crystals grow from the confined volume of a droplet of a eutectic composition melt that forms via the dewetting of nanometric thin films. We can control their curvature by controlling the environment in which the process is carried out, including several parameters, such as the contact angle and the curvature of the drops, by changing the surface tension of the liquid drop during crystal growth. Here we present an energetic model that explains this phenomenon and predicts why and under what conditions crystals will be forced to grow with the curvature of the microdroplet even though the energetic state of a curved single crystal is very high.

  14. Near Surface Structure of Organic Semiconductor Tetracene Single Crystal

    NASA Astrophysics Data System (ADS)

    Wakabayashi, Yusuke; Morisaki, Hazuki; Kimura, Tsuyoshi; Miwa, Kazumoto; Koretsune, Takashi; Takeya, Jun

    2014-03-01

    Electric conduction in organic crystals is highly anisotropic because of the anisotropic molecular orbitals. Crystal structure governs the transfer through the overlap integral among the highest occupied (or lowest unoccupied) molecular orbitals. In case of organic devices, the place where electrons conduct is the interface. Therefore, the surface structure of organic single crystals is relevant. Surface relaxation of the structure of rubrene single crystal was firstly observed by means of surface x-ray diffraction a few years ago. This time we performed similar measurement on tetracene single crystal, whose molecular shape has large similarity with rubrene while the crystal structure is very different. Tetracene single crystal was grown by the physical vapor transport method, and the surface x-ray diffraction experiments were performed at BL-3A and 4C of the Photon Factory, KEK, Japan. Obtained electron density profile shows a large structural deformation at the surface layer of tetracene.

  15. Ultratough CVD single crystal diamond and three dimensional growth thereof

    DOEpatents

    Hemley, Russell J.; Mao, Ho-kwang; Yan, Chih-shiue

    2009-09-29

    The invention relates to a single-crystal diamond grown by microwave plasma chemical vapor deposition that has a toughness of at least about 30 MPa m.sup.1/2. The invention also relates to a method of producing a single-crystal diamond with a toughness of at least about 30 MPa m.sup.1/2. The invention further relates to a process for producing a single crystal CVD diamond in three dimensions on a single crystal diamond substrate.

  16. Thermally triggered solid-state single-crystal-to-single-crystal structural transformation accompanies property changes.

    PubMed

    Li, Quan-Quan; Ren, Chun-Yan; Huang, Yang-Yang; Li, Jian-Li; Liu, Ping; Liu, Bin; Liu, Yang; Wang, Yao-Yu

    2015-03-16

    The 1D complex [(CuL0.5H2O)⋅H2O]n (1) (H4L = 2,2'-bipyridine-3,3',6,6'-tetracarboxylic acid) undergoes an irreversible thermally triggered single-crystal-to-single-crystal (SCSC) transformation to produce the 3D anhydrous complex [CuL0.5]n (2). This SCSC structural transformation was confirmed by single-crystal X-ray diffraction analysis, thermogravimetric (TG) analysis, powder X-ray diffraction (PXRD) patterns, variable-temperature powder X-ray diffraction (VT-PXRD) patterns, and IR spectroscopy. Structural analyses reveal that in complex 2, though the initial 1D chain is still retained as in complex 1, accompanied with the Cu-bound H2O removed and new O(carboxyl)-Cu bond forming, the coordination geometries around the Cu(II) ions vary from a distorted trigonal bipyramid to a distorted square pyramid. With the drastic structural transition, significant property changes are observed. Magnetic analyses show prominent changes from antiferromagnetism to weak ferromagnetism due to the new formed Cu1-O-C-O-Cu4 bridge. The catalytic results demonstrate that, even though both solid-state materials present high catalytic activity for the synthesis of 2-imidazolines derivatives and can be reused, the activation temperature of complex 1 is higher than that of complex 2. In addition, a possible pathway for the SCSC structural transformations is proposed.

  17. Large single domain 123 material produced by seeding with single crystal rare earth barium copper oxide single crystals

    DOEpatents

    Todt, Volker; Miller, Dean J.; Shi, Donglu; Sengupta, Suvankar

    1998-01-01

    A method of fabricating bulk YBa.sub.2 Cu.sub.3 O.sub.x where compressed powder oxides and/or carbonates of Y and Ba and Cu present in mole ratios to form YBa.sub.2 Cu.sub.3 O.sub.x are heated in the presence of a Nd.sub.1+x Ba.sub.2-x Cu.sub.3 O.sub.y seed crystal to a temperature sufficient to form a liquid phase in the YBa.sub.2 Cu.sub.3 O.sub.x while maintaining the seed crystal solid. The materials are slowly cooled to provide a YBa.sub.2 Cu.sub.3 O.sub.x material having a predetermined number of domains between 1 and 5. Crack-free single domain materials can be formed using either plate shaped seed crystals or cube shaped seed crystals with a pedestal of preferential orientation material.

  18. Growth of AlN single crystals by modified PVT

    NASA Astrophysics Data System (ADS)

    Wu, Honglei; Zheng, Ruisheng; Meng, Shu; Guo, Yuan

    2008-11-01

    Growth of AlN single crystals is achieved by physical vapor transport (PVT) in the reverse cone tungsten crucible, which is induction-heated, for obtaining proper sublimation rate and ensuring effective heat and mass transport. In the experiment, there is a little hole at the center of crucible lid where the temperature is lower than the periphery, and there is a tungsten cover on the lid. A self-seeded AlN single crystal is grown due to the anisotropic growth property of AlN crystals and limitation of the hole. During the following growth, the crystal as a seed becomes a large size and high quality single crystal. By modified PVT, separate AlN single crystals with diameters of larger than 2mm on the crucible lid have been obtained successfully for the first time.

  19. Polymer single crystal membranes from curved liquid/liquid interface

    NASA Astrophysics Data System (ADS)

    Wang, Wenda; Li, Christopher; Soft Matter Research Group Team

    2014-03-01

    The weak mechanical properties of the current available vesicles such as liposomes, polymersomes, colloidosomes limit their applications for targeting delivery of drugs/genes. Recently, we developed an emulsion-crystallization method to grow polymer curved single crystals. Using polyethylene and poly(l-lactic acid)as the model systems, enclosed or partially open polymer single crystals have been obtained. Electron diffraction and XRD results confirmed their crystalline structure. The single crystal hollow sphere is structurally close to polymersomes, but with thinner wall and higher modulus.

  20. Advanced single crystal for SSME turbopumps

    NASA Technical Reports Server (NTRS)

    Fritzemeier, L. G.

    1989-01-01

    The objective of this program was to evaluate the influence of high thermal gradient casting, hot isostatic pressing (HIP) and alternate heat treatments on the microstructure and mechanical properties of a single crystal nickel base superalloy. The alloy chosen for the study was PWA 1480, a well characterized, commercial alloy which had previously been chosen as a candidate for the Space Shuttle Main Engine high pressure turbopump turbine blades. Microstructural characterization evaluated the influence of casting thermal gradient on dendrite arm spacing, casting porosity distribution and alloy homogeneity. Hot isostatic pressing was evaluated as a means of eliminating porosity as a preferred fatigue crack initiation site. The alternate heat treatment was chosen to improve hydrogen environment embrittlement resistance and for potential fatigue life improvement. Mechanical property evaluation was aimed primarily at determining improvements in low cycle and high cycle fatigue life due to the advanced processing methods. Statistically significant numbers of tests were conducted to quantitatively demonstrate life differences. High thermal gradient casting improves as-cast homogeneity, which facilitates solution heat treatment of PWA 1480 and provides a decrease in internal pore size, leading to increases in low cycle and high cycle fatigue lives.

  1. Kinetics of ion transport through supramolecular channels in single crystals.

    PubMed

    Assouma, Cyrille D; Crochet, Aurélien; Chérémond, Yvens; Giese, Bernd; Fromm, Katharina M

    2013-04-22

    Single-crystal to single-crystal transformations are possible by ion-exchange and transport reactions through supramolecular channels that are composed of crown ether molecules and use trihalide ions as scaffolds. Kinetic measurements of ion transport at different temperatures provide activation energy data and show that a very fast exchange of K(+) ions with Na(+) ions occurs.

  2. A Quick Method for Determining the Density of Single Crystals.

    ERIC Educational Resources Information Center

    Roman, Pascual; Gutierrez-Zorrilla, Juan M.

    1985-01-01

    Shows how the Archimedes method is used to determine the density of a single crystal of ammonium oxalate monohydrate. Also shows how to calculate the density of other chemicals when they are available as single crystals. Experimental procedures and materials needed are included. (JN)

  3. Semiconductor single crystal external ring resonator cavity laser and gyroscope

    SciTech Connect

    Spitzer, M.P.

    1993-08-31

    A ring laser is described comprising: a semiconductor single crystal external ring resonator cavity having a plurality of reflecting surfaces defined by the planes of the crystal and establishing a closed optical path; and a discrete laser medium disposed in said semiconductor single crystal external ring resonator cavity for generating coherent light in said cavity, wherein said resonator cavity is decoupled from the laser medium.

  4. Fabrication of polypyrrole nano-arrays in lysozyme single crystals.

    PubMed

    England, Matt W; Lambert, Elizabeth M; Li, Mei; Turyanska, Lyudmila; Patil, Avinash J; Mann, Stephen

    2012-11-01

    A template-directed method for the synthesis and organization of partially oxidized polypyrrole (PPy) nanoscale arrays within the solvent channels of glutaraldehyde-cross-linked lysozyme single crystals is presented. Macroscopic single crystals of the periodically arranged protein-polymer superstructure are electrically conductive, insoluble in water and organic solvents, and display increased levels of mechanical plasticity compared with native cross-linked lysozyme crystals.

  5. Cleavage oriented iron single crystal fracture toughness

    NASA Astrophysics Data System (ADS)

    Hribernik, Michael Louis

    Fundamental understanding of atomic level mechanisms controlling cleavage fracture in bcc metals, and the corresponding brittle to ductile transition (BDT) has been a long sought, 'grand challenge' of science. This is particularly true for the BDT in Fe, which is among vital elements that underpin our technological civilization. A key obstacle to developing an understanding of the BDT in Fe is the absence of a reliable database on the temperature dependence of toughness in Fe. In ferritic alloys, the micro-arrest toughness of ferrite, Kmu(T), is hypothesized to control macroscopic cleavage. As a surrogate for Kmu(T), special techniques were developed to measure the arrest toughness, Ka(T), for cleavage oriented, Fe single crystals. Further, the mechanisms controlling cleavage and the BDT should be reflected in the loading rate dependence of static-dynamic initiation toughness, K Ic and KId. Thus KIc/d(T) were also measured for K-rate from 10-1 to 104 MPa√m/s. These studies led to the following conclusions: (1) Ka is semi-brittle, increasing from an average of ≈ 3.5 MPa√m at -196°C to ≈ 9 MPa√m at 0°C. (2) The (100) Ka are similar in the [010] and [011] and orientations, but cleavage does not occur on (110) planes. (3) The Ka for unalloyed Fe is about 150°C lower than that for Fe-3wt%Si, suggesting that equivalent Ka may occur at equivalent lattice sigmay. (4) Higher K-rate shift K Ic/d(T) curves to higher T. (5) The shifts of the KIc/d(T) and Ka(T) curves can be understood and modeled based on dislocation dynamics concepts for the glide of screw dislocations with a stress (and T) controlled activation energy, Ea, with a maximum value of about ≈ 0.5 eV. (6) This Ea is consistent with a double kink nucleation mechanism. Etch pit, slip trace and ledge patterns on side, fracture and sectioned surfaces of the crystals were characterized to study dislocation activity associated with cleavage and the BDT. The results showed extensive dislocation activity on

  6. Solvent-Induced Single Crystal-Single Crystal Transformation of an Interpenetrated Three-Dimensional Copper Triazole Catalytic Framework.

    PubMed

    Wang, Ying; Meng, Shan-Shan; Lin, Peng-Xiang; Xiao, Yi-Wei; Ma, Qing-Qing; Xie, Qiong; Chen, Yuan-Yuan; Zhao, Xiao-Jun; Chen, Jun

    2016-05-01

    The 2-fold interpenetrated 3D framework 1 can be solvent-induced to noninterpenetrated framework 1' in a reversible single crystal-single crystal transformation fashion. In addition, 1' represents the first catalyst based on triazole to catalyze the aerobic homocoupling of various substituted arylboronic acids.

  7. Metal-center exchange of tetrahedral cages: single crystal to single crystal and spin-crossover properties.

    PubMed

    Zhang, Feng-Li; Chen, Jia-Qian; Qin, Long-Fang; Tian, Lei; Li, Zaijun; Ren, Xuehong; Gu, Zhi-Guo

    2016-04-01

    An effective single crystal to single crystal transformation from a tetrahedral Ni cage to an FeNi cage was demonstrated. The iron(ii) centers of the FeNi cage can be induced to display spin crossover behaviors with an increasing amount of Fe(II) ions. The SCSC metal-center exchange provides a powerful approach to modify solid magnetic properties.

  8. Segmentation Effect on Inhomogeneity of [110]-Single Crystal Deformation

    NASA Astrophysics Data System (ADS)

    Lychagin, D. V.; Nesterenko, E. A. Alfyorova V. P.

    2016-08-01

    This work presents a detailed analysis of segmentation process in FCC single crystals with compression axis [110] and side faces( ̅110) and (001) considering effect of octahedral shear crystal-geometry and basic stress concentrators. Sequence of meso-band systems formation on side faces is determined. Macro-segmentation patterns are specified, that are common to the FCC single crystals under investigation. It is proved that rectangular shape of highly compressed crystals, elongated in direction of operating planes, is conditioned by orientation symmetry of compression axis, single crystal side faces and shears directions, which are characteristic for the given orientation. The specified patterns are characteristic only for the samples with initial height-to-width ratio equal to 2. When varying sample height relative to the initial one, segmentation patterns will also vary due to crystal geometry variations.

  9. Hemoglobin substitutes.

    PubMed

    Anbari, Kevin K; Garino, Jonathan P; Mackenzie, Colin F

    2004-10-01

    Orthopaedic patients frequently require blood transfusions to treat peri-operative anemia. Research in the area of hemoglobin substitutes has been of great interest since it holds the promise of reducing the reliance on allogeneic blood transfusions. The three categories of hemoglobin substitutes are (1) cell-free, extracellular hemoglobin preparations made from human or bovine hemoglobin (hemoglobin-based oxygen carriers or HBOCs); (2) fluorine-substituted linear or cyclic carbon chains with a high oxygen-carrying capacity (perfluorocarbons); and (3) liposome-encapsulated hemoglobin. Of the three, HBOCs have been the most extensively studied and tested in preclinical and clinical trials that have shown success in diminishing the number of blood transfusions as well as an overall favorable side-effect profile. This has been demonstrated in vascular, cardiothoracic, and orthopaedic patients. HBOC-201, which is a preparation of cell-free bovine hemoglobin, has been approved for clinical use in South Africa. These products may well become an important tool for physicians treating peri-operative anemia in orthopaedic patients.

  10. Physical properties of superconducting single crystal iron sulfide

    NASA Astrophysics Data System (ADS)

    Rodriguez, Efrain E.; Borg, Christopher K. H.; Zhou, Xiuquan; Paglione, Johnpierre; University of Maryland Collaboration

    Recently, the simple binary tetragonal iron sulfide, FeS, was found to be a superconductor with a Tc = 5 K. We have prepared single crystals of tetragonal iron sulfide through hydrothermal de-intercalation of KxFe2-yS2. The KxFe2-yS2 single crystal precursors were grown by slow cooling of stoichiometric melts of K, Fe and S. The silver, plate-like FeS single crystals were highly crystalline with a superconducting transition temperature (Tc) of 4 K. The high quality of the FeS crystals revealed highly anisotropic nature of the magnetic and electronic properties intrinsic to FeS. The physical properties and thermal stability of single crystal FeS will be discussed in detail.

  11. Optical properties of doped potassium gadolinium tungstate single crystals

    NASA Astrophysics Data System (ADS)

    Michalski, E.; Zmija, Jozef; Mierczyk, Zygmunt; Majchrowski, Andrzej; Kopczynski, Krzysztof; Cichowski, S.; Wojtanowski, J.

    2001-08-01

    Single crystals of double tungstates find applications as laser materials having very good parameters. One of the intensively investigated material sis KGD(WO4)2 doped with rare earth elements. Single crystal of KGd(WO4)2 were grown with the use of Top Seeded Solution Growth technique from K2W2O7 solvent. The crystals have low absorption loses and show high lasing efficiency. Optical investigations of as grown KGW:Nd single crystal confirmed their good optical quality and high absorption coefficient near 810 nm, what in connection with strong luminescence near 1067 nm allows fabrication of diode pumped microchip lasers working both in CW and giant pulse regime. Absorption and luminescence spectra of Nd3+ doped KGW single crystals are presented. Laser action was obtained in form of 128.5 kHz train of 100 ns giant pluses due to YAG:Cr4+ passive Q-switch.

  12. Cloning polymer single crystals through self-seeding

    NASA Astrophysics Data System (ADS)

    Xu, Jianjun; Ma, Yu; Hu, Wenbing; Rehahn, Matthias; Reiter, Günter

    2009-04-01

    In general, when a crystal is molten, all molecules forget about their mutual correlations and long-range order is lost. Thus, a regrown crystal does not inherit any features from an initially present crystal. Such is true for materials exhibiting a well-defined melting point. However, polymer crystallites have a wide range of melting temperatures, enabling paradoxical phenomena such as the coexistence of melting and crystallization. Here, we report a self-seeding technique that enables the generation of arrays of orientation-correlated polymer crystals of uniform size and shape (`clones') with their orientation inherited from an initial single crystal. Moreover, the number density and locations of these cloned crystals can to some extent be predetermined through the thermal history of the starting crystal. We attribute this unique behaviour of polymers to the coexistence of variable fold lengths in metastable crystalline lamellae, typical for ordering of complex chain-like molecules.

  13. Hg-1212 and Hg-1223 single crystals: Synthesis and characterisation

    NASA Astrophysics Data System (ADS)

    Gatt, R.; Olsson, E.; Morawski, A.; Lada, T.; Paszewin, A.; Bryntse, I.; Grishin, A. M.; Eeltsev, Yu.; Berastegui, P.; Johansson, L.-G.

    1997-02-01

    Single crystals of HgBa 2CaCu 2O 6+δ (Hg-1212) and HgBa 2Ca 2Cu 3O 8+δ (Hg-1223) were grown from the melt at an argon pressure of 10 kbar. Electron microscopy, as well as single crystal X-ray diffraction studies show that the crystals are well ordered. The EDS analysis indicates the presence of a minor amount of other cations replacing Hg, Ba and Ca in the structure. Refined fractional coordinates and thermal parameters are given for a crystal of Hg-1223 type. Magnetic and resistive measurements show a Tc of 133 K for the Hg-1223 phase.

  14. Cryogenic Actuators and Motors Using Single Crystal Piezoelectrics

    NASA Astrophysics Data System (ADS)

    Jiang, Xiaoning; Rehrig, Paul W.; Hackenberger, Wesley S.; Shrout, Thomas R.

    2006-04-01

    Novel piezoelectric actuators (stack actuator and flextensional actuator) and ultrasonic motors are presented for cryogenic actuations utilizing the excellent cryogenic properties of recently invented single crystal piezoelectrics (PMN-PT and PZN-PT crystals). Single crystal piezoelectrics exhibit large increases in strain over conventional piezoelectric ceramics. Furthermore, the crystals have been found to retain appreciable piezoactivity down to temperatures as low as 20K. These cryogenic actuators are very promising for shape control, precision positioning and force control in various NASA, military and civilian applications such as cryogenic adaptive optics for space telescopes, interferometers in terrestrial planet finder missions, interferometers and spectrometers for remote sensing applications.

  15. Method for harvesting single crystals from a peritectic melt

    DOEpatents

    Todt, Volker R.; Sengupta, Suvankar; Shi, Donglu

    1996-01-01

    A method of preparing single crystals. The method of preparation involves preparing precursor materials of a particular composition, heating the precursor material to achieve a peritectic mixture of peritectic liquid and crystals, cooling the peritectic mixture to quench directly the mixture on a porous, wettable inert substrate to wick off the peritectic liquid, leaving single crystals on the porous substrate. Alternatively, the peritectic mixture can be cooled to a solid mass and reheated on a porous, inert substrate to melt the matrix of peritectic fluid while leaving the crystals unmelted, allowing the wicking away of the peritectic liquid.

  16. Method for harvesting single crystals from a peritectic melt

    DOEpatents

    Todt, V.R.; Sengupta, S.; Shi, D.

    1996-08-27

    A method of preparing single crystals is disclosed. The method of preparation involves preparing precursor materials of a particular composition, heating the precursor material to achieve a peritectic mixture of peritectic liquid and crystals, cooling the peritectic mixture to quench directly the mixture on a porous, wettable inert substrate to wick off the peritectic liquid, leaving single crystals on the porous substrate. Alternatively, the peritectic mixture can be cooled to a solid mass and reheated on a porous, inert substrate to melt the matrix of peritectic fluid while leaving the crystals unmelted, allowing the wicking away of the peritectic liquid. 2 figs.

  17. Method for harvesting rare earth barium copper oxide single crystals

    DOEpatents

    Todt, Volker R.; Sengupta, Suvankar; Shi, Donglu

    1996-01-01

    A method of preparing high temperature superconductor single crystals. The method of preparation involves preparing precursor materials of a particular composition, heating the precursor material to achieve a peritectic mixture of peritectic liquid and crystals of the high temperature superconductor, cooling the peritectic mixture to quench directly the mixture on a porous, wettable inert substrate to wick off the peritectic liquid, leaving single crystals of the high temperature superconductor on the porous substrate. Alternatively, the peritectic mixture can be cooled to a solid mass and reheated on a porous, inert substrate to melt the matrix of peritectic fluid while leaving the crystals melted, allowing the wicking away of the peritectic liquid.

  18. Stability of Detached Grown Germanium Single Crystals

    NASA Technical Reports Server (NTRS)

    Schweizer, M.; Volz, M. P.; Cobb, S. D.; Vujisic, L.; Szofran, F. R.; Rose, M. Franklin (Technical Monitor)

    2001-01-01

    Detachment of the melt meniscus from the crucible during semiconductor Bridgman growth experiments has been observed in recent years, especially under microgravity experiments. Under earth conditions, the hydrostatic pressure counteracts the mechanism, whereby it is more difficult to achieve detached Bridgman growth. Attempts to get stable detached growth under terrestrial conditions have been discussed in the literature and have been the subject of recent experiments in our own group. The advantage of crystals grown without wall contact is obvious: In general, they possess a higher crystal quality than conventional Bridgman grown crystals with wall contact. However, due to the interaction of different parameters such as the wetting behavior of the melt with the crucible, and the dependence of the growth angle with the shape of the melt meniscus, the mechanism leading to detachment is very complicated and not completely understood. We have grown several doped and undoped Germanium crystals with the detached Bridgman and the normal Bridgman growth technique. Pyrolytic boron nitride containers were used for all growth experiments. In the detached grown crystals the typical gap thickness between the pBN crucible and the crystal is in the range of 10 to 100 micrometers, which was determined by performing profilometer measurements. Etch pit density measurements were also performed and a comparison between detached and attached grown crystals will be given. An interesting feature was detected on the surface of a detached grown crystal. Strong surface striations with an average axial distance of 0.5 mm were observed around the whole circumference. The maximum fluctuation of the gap thickness is in the range of 5-10 micrometers. These variations of the detached gap along the crystal axis can be explained by a kind of stiction of the melt/crucible interface and thus by a variation of the meniscus shape. This phenomenon leading to the fluctuation of the gap thickness will be

  19. Stability of Detached Grown Germanium Single Crystals

    NASA Technical Reports Server (NTRS)

    Schweizer, M.; Volz, M. P.; Cobb, S. D.; Motakef, S.; Szofran, F. R.; Curreri, Peter A. (Technical Monitor)

    2002-01-01

    Detachment of the melt meniscus from the crucible during semiconductor Bridgman growth experiments has been observed in recent years especially, under microgravity experiments. Under earth conditions, the hydrostatic pressure counteracts the mechanism, whereby it is more difficult to achieve detached Bridgman growth. Attempts to get stable detached growth under terrestrial conditions have been discussed in the literature and have been the subject of recent experiments in our own group. The advantage of crystals grown without wall contact is obvious: In general, they possess a higher crystal quality than conventional Bridgman grown crystals with wall contact. However, due to the interaction of different parameters such as the wetting behavior of the melt with the crucible, and the dependence of the growth angle with the shape of the melt meniscus, the mechanism leading to detachment is very complicated and not completely understood. We have grown several doped and undoped Germanium crystals with the detached Bridgman and the normal Bridgman growth technique. Pyrolytic boron nitride containers were used for all growth experiments. In the detached grown crystals the typical gap thickness between the pBN crucible and the crystal is in the range of 10 to 100 microns, which was determined by performing profilometer measurements. Etch pit density measurements were also performed and a comparison between detached and attached grown crystals will be given. An interesting feature was detected on the surface of a detached grown crystal. Strong surface striations with an average axial distance of 0.5mm were observed around the whole circumference. The maximum fluctuation of the gap thickness is in the range of 5-10 microns. These variations of the detached gap along the crystal axis can be explained by a kind of stiction of the melt/crucible interface and thus by a variation of the meniscus shape. This phenomenon leading to the fluctuation of the gap thickness will be

  20. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

    NASA Astrophysics Data System (ADS)

    Saidaminov, Makhsud I.; Abdelhady, Ahmed L.; Murali, Banavoth; Alarousu, Erkki; Burlakov, Victor M.; Peng, Wei; Dursun, Ibrahim; Wang, Lingfei; He, Yao; Maculan, Giacomo; Goriely, Alain; Wu, Tom; Mohammed, Omar F.; Bakr, Osman M.

    2015-07-01

    Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3+, X=Br- or I-) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at elevated temperatures. The crystals can be both size- and shape-controlled by manipulating the different crystallization parameters. Despite the rapidity of the method, the grown crystals exhibit transport properties and trap densities comparable to the highest quality MAPbX3 reported to date. The phenomenon of inverse or retrograde solubility and its correlated inverse temperature crystallization strategy present a major step forward for advancing the field on perovskite crystallization.

  1. The Growth of Large Single Crystals.

    ERIC Educational Resources Information Center

    Baer, Carl D.

    1990-01-01

    Presented is an experiment which demonstrates principles of experimental design, solubility, and crystal growth and structure. Materials, procedures and results are discussed. Suggestions for adapting this activity to the high school laboratory are provided. (CW)

  2. A study of crystal growth by solution technique. [triglycine sulfate single crystals

    NASA Technical Reports Server (NTRS)

    Lal, R. B.

    1979-01-01

    The advantages and mechanisms of crystal growth from solution are discussed as well as the effects of impurity adsorption on the kinetics of crystal growth. Uncertainities regarding crystal growth in a low gravity environment are examined. Single crystals of triglycine sulfate were grown using a low temperature solution technique. Small components were assembled and fabricated for future space flights. A space processing experiment proposal accepted by NASA for the Spacelab-3 mission is included.

  3. Single-drop optimization of protein crystallization.

    PubMed

    Meyer, Arne; Dierks, Karsten; Hilterhaus, Dierk; Klupsch, Thomas; Mühlig, Peter; Kleesiek, Jens; Schöpflin, Robert; Einspahr, Howard; Hilgenfeld, Rolf; Betzel, Christian

    2012-08-01

    A completely new crystal-growth device has been developed that permits charting a course across the phase diagram to produce crystalline samples optimized for diffraction experiments. The utility of the device is demonstrated for the production of crystals for the traditional X-ray diffraction data-collection experiment, of microcrystals optimal for data-collection experiments at a modern microbeam insertion-device synchrotron beamline and of nanocrystals required for data collection on an X-ray laser beamline. PMID:22869140

  4. Single-drop optimization of protein crystallization

    PubMed Central

    Meyer, Arne; Dierks, Karsten; Hilterhaus, Dierk; Klupsch, Thomas; Mühlig, Peter; Kleesiek, Jens; Schöpflin, Robert; Einspahr, Howard; Hilgenfeld, Rolf; Betzel, Christian

    2012-01-01

    A completely new crystal-growth device has been developed that permits charting a course across the phase diagram to produce crystalline samples optimized for diffraction experiments. The utility of the device is demonstrated for the production of crystals for the traditional X-ray diffraction data-collection experiment, of microcrystals optimal for data-collection experiments at a modern microbeam insertion-device synchrotron beamline and of nanocrystals required for data collection on an X-ray laser beamline. PMID:22869140

  5. Growing Single Crystals of Compound Semiconductors

    NASA Technical Reports Server (NTRS)

    Naumann, Robert J.; Lehoczky, Sandor L.; Frazier, Donald O.

    1987-01-01

    Defect reduced by preventing melt/furnace contact and suppressing convention. Large crystals of compound semiconductors with few defects grown by proposed new method. Such materials as gallium arsenide and cadmium telluride produced, with quality suitable for very-large-scale integrated circuits or for large focal-plane arrays of photodetectors. Method used on small scale in Earth gravity, but needs microgravity to provide crystals large enough for industrial use.

  6. Single-drop optimization of protein crystallization.

    PubMed

    Meyer, Arne; Dierks, Karsten; Hilterhaus, Dierk; Klupsch, Thomas; Mühlig, Peter; Kleesiek, Jens; Schöpflin, Robert; Einspahr, Howard; Hilgenfeld, Rolf; Betzel, Christian

    2012-08-01

    A completely new crystal-growth device has been developed that permits charting a course across the phase diagram to produce crystalline samples optimized for diffraction experiments. The utility of the device is demonstrated for the production of crystals for the traditional X-ray diffraction data-collection experiment, of microcrystals optimal for data-collection experiments at a modern microbeam insertion-device synchrotron beamline and of nanocrystals required for data collection on an X-ray laser beamline.

  7. A Single Crystal Niobium RF Cavity of the TESLA Shape

    SciTech Connect

    W. Singer; X. Singer; P. Kneisel

    2007-09-01

    A fabrication method for single crystal niobium cavities of the TESLA shape was proposed on the basis of metallographic investigations and electron beam welding tests on niobium single crystals. These tests showed that a cavity can be produced without grain boundaries even in the welding area. An appropriate annealing allows the outgassing of hydrogen and stress relaxation of the material without destruction of the single crystal. A prototype single crystal single cell cavity was built. An accelerating gradient of 37.5 MV/m was reached after approximately 110 mu-m of Buffered Chanical Polishing (BCP) and in situ baking at 120°C for 6 hrs with a quality factor exceeding 2x1010 at 1.8 K. The developed fabrication method can be extended to fabrication of multi cell cavities.

  8. A Single Crystal Niobium RF Cavity of the TESLA Shape

    SciTech Connect

    Singer, W.; Singer, X.; Kneisel, P.

    2007-08-09

    A fabrication method for single crystal niobium cavities of the TESLA shape was proposed on the basis of metallographic investigations and electron beam welding tests on niobium single crystals. These tests showed that a cavity can be produced without grain boundaries even in the welding area. An appropriate annealing allows the outgassing of hydrogen and stress relaxation of the material without destruction of the single crystal. A prototype single crystal single cell cavity was build. An accelerating gradient of 37.5 MV/m was reached after approximately 110 {mu}m of Buffered Chemical Polishing (BCP) and in situ baking at 120 deg. C for 6 hrs with a quality factor exceeding 2x1010 at 1.8 K. The developed fabrication method can be extended to fabrication of multi cell cavities.

  9. Ion crystal transducer for strong coupling between single ions and single photons.

    PubMed

    Lamata, L; Leibrandt, D R; Chuang, I L; Cirac, J I; Lukin, M D; Vuletić, V; Yelin, S F

    2011-07-15

    A new approach for the realization of a quantum interface between single photons and single ions in an ion crystal is proposed and analyzed. In our approach the coupling between a single photon and a single ion is enhanced via the collective degrees of freedom of the ion crystal. Applications including single-photon generation, a memory for a quantum repeater, and a deterministic photon-photon, photon-phonon, or photon-ion entangler are discussed.

  10. Hemoglobin electrophoresis

    MedlinePlus

    ... sickle cell anemia. Other, less common, abnormal Hb molecules cause other types of anemia . ... adults, these are normal percentages of different hemoglobin molecules: Hb A: 95% to 98% Hb A2: 2% ...

  11. Hemoglobin derivatives

    MedlinePlus

    ... in red blood cells that moves oxygen and carbon dioxide between the lungs and body tissues. This article ... attached to carbon monoxide instead of oxygen or carbon dioxide. High amounts of this type of abnormal hemoglobin ...

  12. UCN Production With a Single Crystal of Ortho-Deuterium.

    PubMed

    Utsuro, M; Tanaka, M; Mishima, K; Nagai, Y; Shima, T; Fukuda, Y; Kohmoto, T; Momose, T; Moriai, A; Okumura, K; Yoshino, H

    2005-01-01

    The present paper reports on the preliminary experimental results concerning a new concept of ultracold neutron production with a single crystal converter of ortho-deuterium lying in the ground rotational state at the low temperature of about 10 K, which should make it possible to utilize a guided cold neutron beam instead of irradiating the converter material in the inside of high radiation fields. The successful observation of the clear Bragg scattering pattern from the single crystal converter and the reasonable results from the first experimental trial of the ultracold neutron production with the single crystal are shown.

  13. Transport in organic single-crystal microbelt for conformal electronics

    NASA Astrophysics Data System (ADS)

    Cui, Nan; Tong, Yanhong; Tang, Qingxin; Liu, Yichun

    2016-03-01

    We showed the advantages of flexible rubrene organic single-crystal microbelts in high-performance devices and circuits towards conformal electronics. The anisotropic transport based on the only one organic microbelt was studied by a "cross-channel" method, and the rubrene microbelt showed the highest mobility up to 26 cm2/V s in the length direction. Based on an individual rubrene microbelt, the organic single-crystal circuit with good adherence on a pearl ball and the gain as high as 18 was realized. These results present great potential for applications of organic single-crystal belts in the next-generation conformal electronics.

  14. Growth and characterization of diammonium copper disulphate hexahydrate single crystal

    SciTech Connect

    Siva Sankari, R.; Perumal, Rajesh Narayana

    2014-03-01

    Graphical abstract: Diammonium copper disulphate hexahydrate (DACS) is one of the most promising inorganic dielectric crystals with exceptional mechanical properties. Good quality crystals of DACS were grown by using solution method in a period of 30 days. The grown crystals were subjected to single crystal X-ray diffraction analysis in order to establish their crystalline nature. Thermo gravimetric, differential thermal analysis, FTIR, and UV–vis–NIR analysis were performed for the crystal. Several solid state physical parameters have been determined for the grown crystals. The dielectric constant and the dielectric loss and AC conductivity of the grown crystal were studied as a function of frequency and temperature has been calculated and plotted. - Highlights: • Diammonium copper disulphate is grown for the first time and CCDC number obtained. • Thermal analysis is done to see the stability range of the crystals. • Band gap and UV cut off wavelength of the crystal are determined to be 2.4 eV and 472.86 nm, respectively. • Dielectric constant, dielectric loss and AC conductivity are plotted as a function of applied field. - Abstract: Diammonium copper disulphate hexahydrate is one of the most promising inorganic crystals with exceptional dielectric properties. A good quality crystal was harvested in a 30-day period using solution growth method. The grown crystal was subjected to various characterization techniques like single crystal X-ray diffraction analysis, thermo gravimetric, differential thermal analysis, FTIR, and UV–vis–NIR analysis. Unit cell dimensions of the grown crystal have been identified from XRD studies. Functional groups of the title compounds have been identified from FTIR studies. Thermal stability of the samples was checked by TG/DTA studies. Band gap of the crystal was calculated. The dielectric constant and dielectric loss were studied as a function of frequency of the applied field. AC conductivity was plotted as a function

  15. Growth and characterization of organic material 4-dimethylaminobenzaldehyde single crystal.

    PubMed

    Jebin, R P; Suthan, T; Rajesh, N P; Vinitha, G; Madhusoodhanan, U

    2015-01-25

    The organic material 4-dimethylaminobenzaldehyde single crystals were grown by slow evaporation technique. The grown crystal was confirmed by the single crystal and powder X-ray diffraction analyses. The functional groups of the crystal have been identified from the Fourier Transform Infrared (FTIR) and FT-Raman studies. The optical property of the grown crystal was analyzed by UV-Vis-NIR and photoluminescence (PL) spectral measurements. The thermal behavior of the grown crystal was analyzed by thermogravimetric (TG) and differential thermal analyses (DTA). Dielectric measurements were carried out with different frequencies by using parallel plate capacitor method. The third order nonlinear optical properties of 4-dimethylaminobenzaldehyde was measured by the Z-scan technique using 532 nm diode pumped continuous wave (CW) Nd:YAG laser.

  16. Growth and characterization of organic material 4-dimethylaminobenzaldehyde single crystal

    NASA Astrophysics Data System (ADS)

    Jebin, R. P.; Suthan, T.; Rajesh, N. P.; Vinitha, G.; Madhusoodhanan, U.

    2015-01-01

    The organic material 4-dimethylaminobenzaldehyde single crystals were grown by slow evaporation technique. The grown crystal was confirmed by the single crystal and powder X-ray diffraction analyses. The functional groups of the crystal have been identified from the Fourier Transform Infrared (FTIR) and FT-Raman studies. The optical property of the grown crystal was analyzed by UV-Vis-NIR and photoluminescence (PL) spectral measurements. The thermal behavior of the grown crystal was analyzed by thermogravimetric (TG) and differential thermal analyses (DTA). Dielectric measurements were carried out with different frequencies by using parallel plate capacitor method. The third order nonlinear optical properties of 4-dimethylaminobenzaldehyde was measured by the Z-scan technique using 532 nm diode pumped continuous wave (CW) Nd:YAG laser.

  17. Single crystal Processing and magnetic properties of gadolinium nickel

    SciTech Connect

    Shreve, Andrew John

    2012-01-01

    GdNi is a rare earth intermetallic material that exhibits very interesting magnetic properties. Spontaneous magnetostriction occurs in GdNi at T{sub C}, on the order of 8000ppm strain along the c-axis and only until very recently the mechanism causing this giant magnetostriction was not understood. In order to learn more about the electronic and magnetic structure of GdNi, single crystals are required for anisotropic magnetic property measurements. Single crystal processing is quite challenging for GdNi though since the rare-earth transition-metal composition yields a very reactive intermetallic compound. Many crystal growth methods are pursued in this study including crucible free methods, precipitation growths, and specially developed Bridgman crucibles. A plasma-sprayed Gd2O3 W-backed Bridgman crucible was found to be the best means of GdNi single crystal processing. With a source of high-quality single crystals, many magnetization measurements were collected to reveal the magnetic structure of GdNi. Heat capacity and the magnetocaloric effect are also measured on a single crystal sample. The result is a thorough report on high quality single crystal processing and the magnetic properties of GdNi.

  18. A simple low-cost single-crystal NMR setup.

    PubMed

    Vinding, Mads S; Kessler, Tommy O; Vosegaard, Thomas

    2016-08-01

    A low-cost single-crystal NMR kit is presented along with a web-based post-processing software. The kit consists of a piezo-crystal motor and a goniometer for the crystal, both embedded in a standard wide-bore NMR probe with a 3D printed scaffold. The NMR pulse program controls the angle setting automatically, and the post-processing software incorporates a range of orientation-angle discrepancies present in the kit and other single-crystal setups. Results with a NaNO3 single-crystal show a high degree of reproducibility and excellent agreement with previous findings for the anisotropic quadrupolar interaction. PMID:27295612

  19. Growing intermetallic single crystals using in situ decanting

    SciTech Connect

    Petrovic, Cedomir; Canfield, Paul; Mellen, Jonathan

    2012-05-16

    High temperature metallic solution growth is one of the most successful and versatile methods for single crystal growth, and is particularly suited for exploratory synthesis. The method commonly utilizes a centrifuge at room temperature and is very successful for the synthesis of single crystal phases that can be decanted from the liquid below the melting point of the silica ampoule. In this paper, we demonstrate the extension of this method that enables single crystal growth and flux decanting inside the furnace at temperatures above 1200°C. This not only extends the number of available metallic solvents that can be used in exploratory crystal growth but also can be particularly well suited for crystals that have a rather narrow exposed solidification surface in the equilibrium alloy phase diagram.

  20. Three-Dimensional Conformation of Folded Polymers in Single Crystals

    NASA Astrophysics Data System (ADS)

    Hong, You-lee; Yuan, Shichen; Li, Zhen; Ke, Yutian; Nozaki, Koji; Miyoshi, Toshikazu

    2015-10-01

    The chain-folding mechanism and structure of semicrystalline polymers have long been controversial. Solid-state NMR was applied to determine the chain trajectory of 13C CH3 -labeled isotactic poly(1-butene) (i PB 1 ) in form III chiral single crystals blended with nonlabeled i PB 1 crystallized in dilute solutions under low supercooling. An advanced 13C - 13C double-quantum NMR technique probing the spatial proximity pattern of labeled 13C nuclei revealed that the chains adopt a three-dimensional (3D) conformation in single crystals. The determined results indicate a two-step crystallization process of (i) cluster formation via self-folding in the precrystallization stage and (ii) deposition of the nanoclusters as a building block at the growth front in single crystals.

  1. Twisted Single Crystals of Meta-Aromatic Polyamides

    NASA Astrophysics Data System (ADS)

    Lawrence, D. P.; Martin, D. C.

    1996-03-01

    The morphology of single crystals of the aromatic polyamide poly(metaphenylene isophthalamide) (MPDI or Nomex) was studied by transmission electron microscopy (TEM) and selected area electron diffraction (SAED). The single crystals of MPDI were slowly grown from 0.1 weight percent solution. MPDI forms elongated crystals which aggregate together to form highly regular twisted helical bundles. The repeat periods of the helices typically range from 240 nm to 1000 nm and the bundle diameters vary from 36 nm to 120 nm. The angle between the edge of the crystal and the bundle axis varies from 40 to 65 degrees. The regular twisting evidently arises from a bending moment induced by the triclinic symmetry of the MPDI unit cell and the lamellar geometry of the chain-folded single crystal.

  2. Effect of gamma ray irradiation on sodium borate single crystals

    NASA Astrophysics Data System (ADS)

    Kalidasan, M.; Asokan, K.; Baskar, K.; Dhanasekaran, R.

    2015-12-01

    In this work, the effects of 5 kGy, 10 kGy and 20 kGy doses of gamma ray irradiation on sodium borate, Na2[B4O5(OH)4]·(H2O)8 single crystals have been studied. Initially these crystals were grown by solution growth technique and identified as monoclinic using X-ray diffraction analysis. X-ray rocking curves confirm the formation of crystalline defects due to gamma rays in sodium borate single crystals. The electron paramagnetic resonance spectra have been recorded to identify the radicals created due to gamma ray irradiation in sodium borate single crystals. The thermoluminescence glow curves due to the defects created by gamma rays in this crystal have been observed and their kinetic parameters were calculated using Chen's peak shape method. The optical absorption increases and photoluminescence spectral intensity decreases for 5 kGy and 20 kGy doses gamma ray irradiated crystals compared to pristine and 10 kGy dose irradiated one. The effect of various doses of gamma rays on vibrational modes of the sodium borate single crystals was studied using FT-Raman and ATR-FTIR spectral analysis. The dielectric permittivity, conductance and dielectric loss versus frequency graphs of these crystals have been analyzed to know the effect of gamma ray irradiation on these parameters.

  3. Study of single crystals of metal solid solutions

    NASA Technical Reports Server (NTRS)

    Doty, J. P.; Reising, J. A.

    1973-01-01

    The parameters and requirements for growing single crystals of relatively high melting point metals in a zero gravity environment are studied. The crystal growth of metals such as silver, copper, gold, and alloys with a melting point between 900-1100 C is examined.

  4. Growth and characterisation of benzaldehyde semicarbazone (BSC) single crystals

    NASA Astrophysics Data System (ADS)

    Ramesh Babu, R.; Vijayan, N.; Gopalakrishnan, R.; Ramasamy, P.

    2002-05-01

    Single crystals of potential organic nonlinear optical materials of Benzaldehyde Semicarbazone (BSC) were grown by slow evaporation technique. The grown crystals were identified by X-ray diffraction method. The functional groups were identified from FT-IR spectrum. UV-visible and thermal gravimetric analyses were made.

  5. Growth of single crystals by vapor transport

    NASA Technical Reports Server (NTRS)

    Wiedemeier, H.

    1978-01-01

    The primary objectives of the program were to establish basic vapor transport and crystal growth properties and to determine thermodynamic, kinetic and structural parameters relevant to chemical vapor transport systems for different classes of materials. An important aspect of these studies was the observation of the effects of gravity-caused convection on the mass transport rate and crystal morphology. These objectives were accomplished through extensive vapor transport, thermochemical and structural studies on selected Mn-chalcogenides, II-VI and IV-VI compounds.

  6. Measurement of single crystal surface parameters

    NASA Technical Reports Server (NTRS)

    Swanson, L. W.; Bell, A. E.; Strayer, R. W.

    1972-01-01

    The sticking coefficient and thermal desorption spectra of Cs from the (110) plane of W was investigated. A sticking coefficient of unity for the monolayer region was measured for T 250 K. Several distinct binding states were observed in the thermal desorption spectrum. Work function and electron reflection measurements were made on the (110) and (100) crystal faces of Mo. Both LEED and Auger were used to determine the orientation and cleanliness of the crystal surfaces. The work function values obtained for the (110) and (100) planes of Mo were 4.92 and 4.18 eV respectively.

  7. Phylogeny of Echinoderm Hemoglobins

    PubMed Central

    Christensen, Ana B.; Herman, Joseph L.; Elphick, Maurice R.; Kober, Kord M.; Janies, Daniel; Linchangco, Gregorio; Semmens, Dean C.; Bailly, Xavier; Vinogradov, Serge N.; Hoogewijs, David

    2015-01-01

    Background Recent genomic information has revealed that neuroglobin and cytoglobin are the two principal lineages of vertebrate hemoglobins, with the latter encompassing the familiar myoglobin and α-globin/β-globin tetramer hemoglobin, and several minor groups. In contrast, very little is known about hemoglobins in echinoderms, a phylum of exclusively marine organisms closely related to vertebrates, beyond the presence of coelomic hemoglobins in sea cucumbers and brittle stars. We identified about 50 hemoglobins in sea urchin, starfish and sea cucumber genomes and transcriptomes, and used Bayesian inference to carry out a molecular phylogenetic analysis of their relationship to vertebrate sequences, specifically, to assess the hypothesis that the neuroglobin and cytoglobin lineages are also present in echinoderms. Results The genome of the sea urchin Strongylocentrotus purpuratus encodes several hemoglobins, including a unique chimeric 14-domain globin, 2 androglobin isoforms and a unique single androglobin domain protein. Other strongylocentrotid genomes appear to have similar repertoires of globin genes. We carried out molecular phylogenetic analyses of 52 hemoglobins identified in sea urchin, brittle star and sea cucumber genomes and transcriptomes, using different multiple sequence alignment methods coupled with Bayesian and maximum likelihood approaches. The results demonstrate that there are two major globin lineages in echinoderms, which are related to the vertebrate neuroglobin and cytoglobin lineages. Furthermore, the brittle star and sea cucumber coelomic hemoglobins appear to have evolved independently from the cytoglobin lineage, similar to the evolution of erythroid oxygen binding globins in cyclostomes and vertebrates. Conclusion The presence of echinoderm globins related to the vertebrate neuroglobin and cytoglobin lineages suggests that the split between neuroglobins and cytoglobins occurred in the deuterostome ancestor shared by echinoderms and

  8. Deformation mechanisms in tungsten single crystals in ballistic impact experiments

    NASA Astrophysics Data System (ADS)

    Bruchey, W. J., Jr.; Herring, R. N.; Kingman, P. W.; Horwath, E. J.

    1993-05-01

    The performance of tungsten single crystals in ballistic impact varies strongly as a function of crystallographic orientation. The deformation structure of recovered single crystal rods fired in ballistic environments has been characterized by optical microscopy, SEM and TEM, and x-ray diffraction. The observed microstructures are varied and provide substantial insights into the factors governing the penetration and flow behavior under ballistic conditions. Crystallographic orientation influences the potential for developing shear which enhances material flow, and this enhancement ultimately maximizes the energy available for target penetration. Microstructural analysis elucidates the various mechanisms occuring during the flow process for single crystals of high-symmetry orientations, and suggests possible analogies between the penetration behavior of the tungsten single crystals and other materials.

  9. On the deformation mechanisms in single crystal Hadfield manganese steels

    SciTech Connect

    Karaman, I.; Sehitoglu, H.; Gall, K.; Chumlyakov, Y.I.

    1998-02-13

    Austenitic manganese steel, so called Hadfield manganese steel, is frequently used in mining and railroad frog applications requiring excessive deformation and wear resistance. Its work hardening ability is still not completely understood. Previous studies attributed the work-hardening characteristics of this material to dynamic strain aging or an imperfect deformation twin, a so-called pseudotwin. Unfortunately, these previous studies have all focused on polycrystalline Hadfield steels. To properly study the mechanisms of deformation in the absence of grain boundary or texture effects, single crystal specimens are required. The purpose of this work is the following: (1) observe the inelastic stress-strain behavior of Hadfield single crystals in orientations where twinning and slip are individually dominating or when they are competing deformation mechanisms; and (2) determine the microyield points of Hadfield single crystals and use micro-mechanical modeling to predict the stress-strain response of a single crystal undergoing micro-twinning.

  10. High-temperature alloys: Single-crystal performance boost

    NASA Astrophysics Data System (ADS)

    Schütze, Michael

    2016-08-01

    Titanium aluminide alloys are lightweight and have attractive properties for high-temperature applications. A new growth method that enables single-crystal production now boosts their mechanical performance.

  11. Large single domain 123 material produced by seeding with single crystal rare earth barium copper oxide single crystals

    DOEpatents

    Todt, V.; Miller, D.J.; Shi, D.; Sengupta, S.

    1998-07-07

    A method of fabricating bulk YBa{sub 2}Cu{sub 3}O{sub x} where compressed powder oxides and/or carbonates of Y and Ba and Cu present in mole ratios to form YBa{sub 2}Cu{sub 3}O{sub x} are heated in the presence of a Nd{sub 1+x}Ba{sub 2{minus}x}Cu{sub 3}O{sub y} seed crystal to a temperature sufficient to form a liquid phase in the YBa{sub 2}Cu{sub 3}O{sub x} while maintaining the seed crystal solid. The materials are slowly cooled to provide a YBa{sub 2}Cu{sub 3}O{sub x} material having a predetermined number of domains between 1 and 5. Crack-free single domain materials can be formed using either plate shaped seed crystals or cube shaped seed crystals with a pedestal of preferential orientation material. 7 figs.

  12. Inhomogeneities in single crystals of cuprate oxide superconductors

    NASA Technical Reports Server (NTRS)

    Moorjani, K.; Bohandy, J.; Kim, B. F.; Adrian, F. J.

    1991-01-01

    The next stage in the evolution of experimental research on the high temperature superconductors will require high quality single crystals and epitaxially grown crystalline films. However, inhomogeneities and other defects are not uncommon in single crystals of cuprate oxide superconductors, so a corollary requirement will be a reliable method for judging the quality of these materials. The application of magnetically modulated resistance methods in this task is briefly described and illustrated.

  13. Synthesis and Single-Crystal Growth of Ca

    SciTech Connect

    Nakatsuji, Satoru; Maeno, Yoshiteru

    2001-01-01

    For the study of the quasi-two-dimensional Mott transition system Ca{sub 2-x}Sr{sub x}RuO{sub 4}, we have succeeded in synthesizing polycrystalline samples and also growing single crystals by a floating-zone method. Details of the preparations for the entire solution range are described. The structural, transport, and magnetic properties of both polycrystalline and single-crystal samples are fully in agreement.

  14. Formation of gallium microinclusions in GaAs single crystals

    SciTech Connect

    Vasilenko, N.D.; Gorbatyuk, A.Ya.; Maronchuk, I.E.

    1988-08-01

    In this report we analyze the causes of gallium microinclusion formation in gallium arsenide single crystals. We present a model in which microinclusions result from the decomposition of a supersaturated solid solution. From experimental data available in the literature and calculated kinetic parameters of the model we demonstrate that microinclusion formation in bulk single crystals follows the mechanism of homogeneous nucleation and Brownian coalescence of precipitated liquid gallium metal.

  15. Fatigue damage modeling for coated single crystal superalloys

    NASA Technical Reports Server (NTRS)

    Nissley, David M.

    1988-01-01

    A high temperature, low-cycle fatigue life prediction method for coated single crystal nickel-base superalloys is being developed. The method is being developed for use in predicting crack initiation life of coated single crystal turbine airfoils. Although the models are being developed using coated single crystal PWA 1480, they should be readily adaptable to other coated nickel-base single crystal materials. The coatings choosen for this effort were of two generic types: a low pressure plasma sprayed NiCoCrAlY overlay, designated PWA 286, and an aluminide diffusion, designated PWA 273. In order to predict the useful crack initiation life of airfoils, the constitutive and failure behavior of the coating/substrate combination must be taken into account. Coatings alter the airfoil surface microstructure and are a primary source from which cracks originate. The adopted life prediction approach addresses this complexity by separating the coating and single crystal crack initiation regimes. This provides a flexible means for using different life model formulations for the coating and single crystal materials. At the completion of this program, all constitutive and life model formulations will be available in equation form and as software. The software will use the MARC general purpose finite element code to drive the constitutive models and calculate life parameters.

  16. Single crystals of single-walled carbon nanotubes formed by self-assembly.

    PubMed

    Schlittler, R R; Seo, J W; Gimzewski, J K; Durkan, C; Saifullah, M S; Welland, M E

    2001-05-11

    We report the self-assembly of single crystals of single-walled carbon nanotubes (SWCNTs) using thermolysis of nano-patterned precursors. The synthesis of these perfectly ordered, single crystals of SWCNTs results in extended structures with dimension on the micrometer scale. Each crystal is composed of an ordered array of tubes with identical diameters and chirality, although these properties vary between crystals. The results show that SWCNTs can be produced as a perfect bulk material on the micrometer scale and point toward the synthesis of bulk macroscopic crystalline material.

  17. Synthesis and characterization of Mo 3Si single crystal

    NASA Astrophysics Data System (ADS)

    Rosales, I.

    2008-08-01

    Mo 3Si single crystals were successfully produced using an optical floating zone furnace. Reoriented specimens were obtained from the original crystal with <1 1 1>, <1 1 0> and <1 0 0> orientations. Cracking behavior of the crystals shows an interesting relation regarding their crystal orientation. Fracture toughness values show small orientation dependence. The hardness test shows that the hard plane is the (1 0 0), and the softest plane was the (1 1 0) and not the (1 1 1) as it was expected.

  18. Single crystal niobium tubes for particle colliders accelerator cavities

    SciTech Connect

    Murphy, James E

    2013-02-28

    The objective of this research project is to produce single crystal niobium (Nb) tubes for use as particle accelerator cavities for the Fermi laboratory’s International Linear Collider project. Single crystal Nb tubes may have superior performance compared to a polycrystalline tubes because the absence of grain boundaries may permit the use of higher accelerating voltages. In addition, Nb tubes that are subjected to the high temperature, high vacuum crystallization process are very pure and well annealed. Any impurity with a significantly higher vapor pressure than Nb should be decreased by the relatively long exposure at high temperature to the high vacuum environment. After application of the single crystal process, the surfaces of the Nb tubes are bright and shiny, and the tube resembles an electro polished Nb tube. For these reasons, there is interest in single crystal Nb tubes and in a process that will produce single crystal tubes. To convert a polycrystalline niobium tube into a single crystal, the tube is heated to within a few hundred °C of the melting temperature of niobium, which is 2477 °C. RF heating is used to rapidly heat the tube in a narrow zone and after reaching the operating temperature, the hot zone is slowly passed along the length of the tube. For crystallization tests with Nb tubes, the traverse rate was in the range of 1-10 cm per hour. All the crystallization tests in this study were performed in a water-cooled, stainless steel chamber under a vacuum of 5 x10-6 torr or better. In earliest tests of the single crystal growth process, the Nb tubes had an OD of 1.9 cm and a wall thickness of 0.15 mm. With these relatively small Nb tubes, the single crystal process was always successful in producing single crystal tubes. In these early tests, the operating temperature was normally maintained at 2200 °C, and the traverse rate was 5 cm per hour. In the next test series, the Nb tube size was increased to 3.8 cm OD and the wall thickness was

  19. Cortical hemoglobin concentration changes underneath the coil after single-pulse transcranial magnetic stimulation: a near-infrared spectroscopy study.

    PubMed

    Furubayashi, Toshiaki; Mochizuki, Hitoshi; Terao, Yasuo; Arai, Noritoshi; Hanajima, Ritsuko; Hamada, Masashi; Matsumoto, Hideyuki; Nakatani-Enomoto, Setsu; Okabe, Shingo; Yugeta, Akihiro; Inomata-Terada, Satomi; Ugawa, Yoshikazu

    2013-03-01

    Using near-infrared spectroscopy (NIRS) and multichannel probes, we studied hemoglobin (Hb) concentration changes when single-pulse transcranial magnetic stimulation (TMS) was applied over the left hemisphere primary motor cortex (M1). Seventeen measurement probes were centered over left M1. Subjects were studied in both active and relaxed conditions, with TMS intensity set at 100%, 120%, and 140% of the active motor threshold. The magnetic coils were placed so as to induce anteromedially directed currents in the brain. Hb concentration changes were more prominent at channels over M1 and posterior to it. Importantly, Hb concentration changes at M1 after TMS differed depending on whether the target muscle was in an active or relaxed condition. In the relaxed condition, Hb concentration increased up to 3-6 s after TMS, peaking at ∼6 s, and returned to the baseline. In the active condition, a smaller increase in Hb concentrations continued up to 3-6 s after TMS (early activation), followed by a decrease in Hb concentration from 9 to 12 s after TMS (delayed deactivation). Hb concentration changes in the active condition at higher stimulus intensities were more pronounced at locations posterior to M1 than at M1. We conclude that early activation occurs when M1 is activated transsynaptically. The relatively late deactivation may result from the prolonged inhibition of the cerebral cortex after activation. The posterior-dominant activation at higher intensities in the active condition may result from an additional activation of the sensory cortex due to afferent inputs from muscle contraction evoked by the TMS. PMID:23274310

  20. Growth and properties of benzil doped benzimidazole (BMZ) single crystals

    SciTech Connect

    Babu, R. Ramesh; Sukumar, M.; Vasudevan, V.; Shakir, Mohd.; Ramamurthi, K.; Bhagavannarayana, G.

    2010-09-15

    In the present work, we have made an attempt to study the effect of benzil doping on the properties of benzimidazole single crystals. For this purpose we have grown pure and benzil doped benzimidazole single crystals by vertical Bridgman technique. The grown crystals were characterized by various characterization techniques. The presence of dopants confirmed by powder X-ray diffraction (XRD). Crystalline perfection of the grown crystals has been analysed by high-resolution X-ray diffraction (HRXRD). The transmittance, electrical property and mechanical strength have been analysed using UV-vis-NIR spectroscopic, dielectric and Vicker's hardness studies. The relative second harmonic generation efficiency of pure and doped benzimidazole crystals measured using Kurtz powder test.

  1. Anisotropy of nickel-base superalloy single crystals

    NASA Technical Reports Server (NTRS)

    Mackay, R. A.; Maier, R. D.; Dreshfield, R. L.

    1980-01-01

    The effects of crystal orientation on the mechanical properties of single crystals of the nickel-based superalloy Mar-M247 are investigated. Tensile tests at temperatures from 23 to 1093 C and stress rupture tests at temperatures from 760 to 1038 C were performed for 52 single crystals at various orientations. During tensile testing between 23 and 760 C, single crystals with high Schmid factors were found to be favorably oriented for slip and to exhibit lower strength and higher ductility than those with low Schmid factors. Crystals which required large rotations to become oriented for cross slip were observed to have the shortest stress rupture lives at 760 C, while those which required little or no rotation had the longest lives. In addition, stereographic triangles obtained for Mar-M247 and Mar-M200 single crystals reveal that crystals with orientations near the -111 had the highest lives, those near the 001 had high lives, and those near the 011 had low lives.

  2. An analytical model for porous single crystals with ellipsoidal voids

    NASA Astrophysics Data System (ADS)

    Mbiakop, A.; Constantinescu, A.; Danas, K.

    2015-11-01

    A rate-(in)dependent constitutive model for porous single crystals with arbitrary crystal anisotropy (e.g., FCC, BCC, HCP, etc.) containing general ellipsoidal voids is developed. The proposed model, denoted as modified variational model (MVAR), is based on the nonlinear variational homogenization method, which makes use of a linear comparison porous material to estimate the response of the nonlinear porous single crystal. Periodic multi-void finite element simulations are used in order to validate the MVAR for a large number of parameters including cubic (FCC, BCC) and hexagonal (HCP) crystal anisotropy, various creep exponents (i.e., nonlinearity), several stress triaxiality ratios, general void shapes and orientations and various porosity levels. The MVAR model, which involves a priori no calibration parameters, is found to be in good agreement with the finite element results for all cases considered in the rate-dependent context. The model is then used in a predictive manner to investigate the complex response of porous single crystals in several cases with strong coupling between the anisotropy of the crystal and the (morphological) anisotropy induced by the shape and orientation of the voids. Finally, a simple way of calibrating the MVAR with just two adjustable parameters is depicted in the rate-independent context so that an excellent agreement with the FE simulation results is obtained. In this last case, this proposed model can be thought as a generalization of the Gurson model in the context of porous single crystals and general ellipsoidal void shapes and orientations.

  3. Fatigue Failure Criteria for Single Crystal Nickel Superalloys

    NASA Technical Reports Server (NTRS)

    Arakere, Nagaraj K.

    1999-01-01

    High Cycle Fatigue (HCF) induced failures in aircraft gas-turbine and rocket engine turbopump blades is a pervasive problem. Single crystal turbine blades are being utilized in rocket engine turbopumps and jet engines throughout industry and NASA because of their superior creep, stress rupture, melt resistance and thermomechanical fatigue capabilities over polycrystalline alloys. Single-crystal materials have highly orthotropic properties making the position of the crystal lattice relative to the pan geometry a significant factor in the overall analysis. The failure modes of single crystal turbine blades is complicated to predict due to the material orthotropy and variations in crystal orientations. A fatigue failure criteria based on the maximum shear stress amplitude [delta t max] on the 30 slip systems, is presented for single crystal nickel superalloys (FCC crystal). This criteria reduces the scatter in uniaxial LCF test data, for four different specimen orientations, for PWA 1484 at 1200 F in air, quite well. A power law curve fit of the failure parameter, delta t max, vs. cycles to failure is presented.

  4. Raman spectra of deuteriated taurine single crystals

    NASA Astrophysics Data System (ADS)

    Souza, J. M. de; Lima, R. J. C.; Freire, P. T. C.; Sasaki, J. M.; Melo, F. E. A.; Filho, J. Mendes; Jones, Derry W.

    2005-05-01

    The polarized Raman spectra of partially deuteriated taurine [(ND 3+) 0.65(NH 3+) 0.35(CH 2) 2SO 3-] crystals from x( zz) x and x( zy) x scattering geometries of the A g and B g irreducible representations of the factor group C 2h are reported. The temperature-dependent Raman spectra of partially deuteriated taurine do not reveal any evidence of the structural phase transition undergone by normal taurine at about 250 K, but an anomaly observed in the 180 cm -1 band at ˜120 K implies a different dynamic for this band (which is involved in a pressure-induced phase transition) in the deuteriated crystal.

  5. Shock Driven Twinning in Tantalum Single Crystals

    SciTech Connect

    McNaney, J M; HSUING, L M; Barton, N R; Kumar, M

    2009-07-20

    Recovery based observations of high pressure material behavior generated under high explosively driven flyer based loading conditions are reported. Two shock pressures, 25, and 55 GPa and four orientations {l_brace}(100), (110), (111), (123){r_brace} were considered. Recovered material was characterized using electron backscatter diffraction along with a limited amount of transmission electron microscopy to assess the occurrence of twinning under each test condition. Material recovered from 25 GPa had a very small fraction of twinning for the (100), (110), and (111) oriented crystals while a more noticeable fraction of the (123) oriented crystal was twinned. Material recovered from 55 GPa showed little twinning for (100) orientation slightly more for the (111) orientation and a large area fraction for the (123) orientation. The EBSD and TEM observations of the underlying deformation substructure are rationalized by comparing with previous static and dynamic results.

  6. Preparation of bead metal single crystals by electron beam heating

    SciTech Connect

    Voigtlaender, Bert; Linke, Udo; Stollwerk, H.; Brona, J.

    2005-11-15

    For the fabrication of small metal bead crystals a gas flame is used to melt a wire forming a liquid droplet which solidifies upon cooling into a single crystal metal bead. Due to oxidation under ambient conditions bead crystals can be formed only from noble metals using this method. Here we describe a method how to fabricate bead crystals from a wide variety of metals and metal alloys (Cu, Mo, Ru, Rh, Pd, Ag, Ta, W, Re, Ir, Pt, Au, PtPd, Pd{sub 80}Pt{sub 20}, PtRh, AuAg, and PtIr) by electron beam heating under vacuum conditions. Narrow x-ray diffraction peaks confirm a high crystal quality of the bead crystals.

  7. Photon Cascade from a Single Crystal Phase Nanowire Quantum Dot.

    PubMed

    Bouwes Bavinck, Maaike; Jöns, Klaus D; Zieliński, Michal; Patriarche, Gilles; Harmand, Jean-Christophe; Akopian, Nika; Zwiller, Val

    2016-02-10

    We report the first comprehensive experimental and theoretical study of the optical properties of single crystal phase quantum dots in InP nanowires. Crystal phase quantum dots are defined by a transition in the crystallographic lattice between zinc blende and wurtzite segments and therefore offer unprecedented potential to be controlled with atomic layer accuracy without random alloying. We show for the first time that crystal phase quantum dots are a source of pure single-photons and cascaded photon-pairs from type II transitions with excellent optical properties in terms of intensity and line width. We notice that the emission spectra consist often of two peaks close in energy, which we explain with a comprehensive theory showing that the symmetry of the system plays a crucial role for the hole levels forming hybridized orbitals. Our results state that crystal phase quantum dots have promising quantum optical properties for single photon application and quantum optics. PMID:26806321

  8. Effect of Crystal Orientation on Fatigue Failure of Single Crystal Nickel Base Turbine Blade Superalloys

    NASA Technical Reports Server (NTRS)

    Arakere, N. K.; Swanson, G.

    2002-01-01

    High cycle fatigue (HCF) induced failures in aircraft gas turbine and rocket engine turbopump blades is a pervasive problem. Single crystal nickel turbine blades are being utilized in rocket engine turbopumps and jet engines throughout industry because of their superior creep, stress rupture, melt resistance, and thermomechanical fatigue capabilities over polycrystalline alloys. Currently the most widely used single crystal turbine blade superalloys are PWA 1480/1493, PWA 1484, RENE' N-5 and CMSX-4. These alloys play an important role in commercial, military and space propulsion systems. Single crystal materials have highly orthotropic properties making the position of the crystal lattice relative to the part geometry a significant factor in the overall analysis. The failure modes of single crystal turbine blades are complicated to predict due to the material orthotropy and variations in crystal orientations. Fatigue life estimation of single crystal turbine blades represents an important aspect of durability assessment. It is therefore of practical interest to develop effective fatigue failure criteria for single crystal nickel alloys and to investigate the effects of variation of primary and secondary crystal orientation on fatigue life. A fatigue failure criterion based on the maximum shear stress amplitude /Delta(sub tau)(sub max))] on the 24 octahedral and 6 cube slip systems, is presented for single crystal nickel superalloys (FCC crystal). This criterion reduces the scatter in uniaxial LCF test data considerably for PWA 1493 at 1200 F in air. Additionally, single crystal turbine blades used in the alternate advanced high-pressure fuel turbopump (AHPFTP/AT) are modeled using a large-scale three-dimensional finite element model. This finite element model is capable of accounting for material orthotrophy and variation in primary and secondary crystal orientation. Effects of variation in crystal orientation on blade stress response are studied based on 297

  9. Swimming photochromic azobenzene single crystals in triacrylate solution.

    PubMed

    Milam, Kenneth; O'Malley, Garrett; Kim, Namil; Golovaty, Dmitry; Kyu, Thein

    2010-06-17

    Self-motion of a growing single crystal of azobenzene chromophore in triacrylate solution (TA) is investigated in relation to the solid-liquid phase diagram bound by the solidus and liquidus lines. Upon thermal quenching from the isotropic melt to the crystal + liquid gap, various single crystals develop in a manner dependent on concentration and supercooling depth. During the crystal growth, TA solvent is rejected from the growing faceted fronts, enriching with TA in close proximity to the crystal-solution interface. The concentration gradient that formed as the result of TA expulsion induces convective flows in the solution and generates spatial variability of surface tension usually responsible for Marangoni effect. Either or both of these phenomena may have contributed to the observed self-motion including swimming, sinking, and floating of the azobenzene rhomboidal crystal in TA solution. A stationary rhomboidal crystal is also shown to swim upon irradiation with the UV light because of a mechanical torque generated by the trans-cis isomerization. Judging from the sinking or floating behavior of the azobenzene crystal, it may be inferred that the nucleation occurs at the solution-air interface.

  10. Optical and structural properties of chalcone NLO single crystals

    NASA Astrophysics Data System (ADS)

    Rajesh Kumar, P. C.; Ravindrachary, V.; Janardhana, K.; Manjunath, H. R.; Karegouda, Prakash; Crasta, Vincent; Sridhar, M. A.

    2011-11-01

    Organic compound (E)-1-(4-methoxyphenyl)-3-(2,3,5-trichlorophenyl)prop-2-en-1-one [MPTCPP] with molecular formula C 16H 11Cl 3O 2 was synthesized using Claisen-Schmidt condensation reaction method. 1H NMR spectra was recorded to identify the various functional groups present in the compound and confirm the chemical structure. The single crystals were grown using slow evaporation solution growth technique. The UV-Visible spectrum study reveals that the crystal is transparent in the entire visible region and the absorption is observed at 364 nm. The Kurtz powder second harmonic generation (SHG) test shows that the MPTCPP is NLO active and its SHG efficiency is three times that of urea. Single crystal XRD study shows that the compound crystallizes in the monoclinic system with a space group Cc. The corresponding lattice parameters of the crystal are a = 28.215(5) Å, b = 3.9740(4) Å, c = 16.178(3) Å and V = 1503.0(4) Å 3. The micro hardness test was carried out and the work hardening coefficient value ( n) of the crystal was found to be 1.48. This indicates that the crystal is hard and is suitable for device application. The thermal study reveals that the thermal stability of the crystal is good.

  11. Method of making macrocrystalline or single crystal semiconductor material

    NASA Technical Reports Server (NTRS)

    Shlichta, P. J. (Inventor); Holliday, R. J. (Inventor)

    1986-01-01

    A macrocrystalline or single crystal semiconductive material is formed from a primary substrate including a single crystal or several very large crystals of a relatively low melting material. This primary substrate is deposited on a base such as steel or ceramic, and it may be formed from such metals as zinc, cadmium, germanium, aluminum, tin, lead, copper, brass, magnesium silicide, or magnesium stannide. These materials generally have a melting point below about 1000 C and form on the base crystals the size of fingernails or greater. The primary substrate has an epitaxial relationship with a subsequently applied layer of material, and because of this epitaxial relationship, the material deposited on the primary substrate will have essentially the same crystal size as the crystals in the primary substrate. If required, successive layers are formed, each of a material which has an epitaxial relationship with the previously deposited layer, until a layer is formed which has an epitaxial relationship with the semiconductive material. This layer is referred to as the epitaxial substrate, and its crystals serve as sites for the growth of large crystals of semiconductive material. The primary substrate is passivated to remove or otherwise convert it into a stable or nonreactive state prior to deposition of the seconductive material.

  12. Low-cost single-crystal turbine blades, volume 2

    NASA Technical Reports Server (NTRS)

    Strangman, T. E.; Dennis, R. E.; Heath, B. R.

    1984-01-01

    The overall objectives of Project 3 were to develop the exothermic casting process to produce uncooled single-crystal (SC) HP turbine blades in MAR-M 247 and higher strength derivative alloys and to validate the materials process and components through extensive mechanical property testing, rig testing, and 200 hours of endurance engine testing. These Program objectives were achieved. The exothermic casting process was successfully developed into a low-cost nonproperietary method for producing single-crystal castings. Single-crystal MAR-M 247 and two derivatives DS alloys developed during this project, NASAIR 100 and SC Alloy 3, were fully characterized through mechanical property testing. SC MAR-M 247 shows no significant improvement in strength over directionally solidified (DS) MAR-M 247, but the derivative alloys, NASAIR 100 and Alloy 3, show significant tensile and fatigue improvements. Firtree testing, holography, and strain-gauge rig testing were used to determine the effects of the anisotropic characteristics of single-crystal materials. No undesirable characteristics were found. In general, the single-crystal material behaved similarly to DS MAR-M 247. Two complete engine sets of SC HP turbine blades were cast using the exothermic casting process and fully machined. These blades were successfully engine-tested.

  13. Single-Crystal Structure of a Covalent Organic Framework

    SciTech Connect

    Zhang, YB; Su, J; Furukawa, H; Yun, YF; Gandara, F; Duong, A; Zou, XD; Yaghi, OM

    2013-11-06

    The crystal structure of a new covalent organic framework, termed COF-320, is determined by single-crystal 3D electron diffraction using the rotation electron diffraction (RED) method for data collection. The COF crystals are prepared by an imine condensation of tetra-(4-anilyl)methane and 4,4'-biphenyldialdehyde in 1,4-dioxane at 120 degrees C to produce a highly porous 9-fold interwoven diamond net. COF-320 exhibits permanent porosity with a Langmuir surface area of 2400 m(2)/g and a methane total uptake of 15.0 wt % (176 cm(3)/cm(3)) at 25 degrees C and 80 bar. The successful determination of the structure of COF-320 directly from single-crystal samples is an important advance in the development of COF chemistry.

  14. Limits to Fourier theory in high thermal conductivity single crystals

    NASA Astrophysics Data System (ADS)

    Wilson, R. B.; Cahill, David G.

    2015-11-01

    We report the results of time-domain thermoreflectance (TDTR) experiments that examine the ability of Fourier theory to predict the thermal response in single crystals when heater dimensions are small. We performed TDTR measurements on Al-coated diamond, 6H-SiC, GaP, Ge, MgO, GaAs, and GaSb single crystals with a wide range of laser spot size radii, 0.7 μm < w 0 < 12 μm. When the laser spot-size is large, w 0 ≈ 12 μm, TDTR data for all crystals are in agreement with predictions of Fourier theory with bulk thermal conductivity values. When the laser spot-size is small, w 0 < 2 μm, there are significant differences between the predictions of Fourier theory and TDTR data for all crystals except MgO.

  15. Method for harvesting rare earth barium copper oxide single crystals

    DOEpatents

    Todt, V.R.; Sengupta, S.; Shi, D.

    1996-04-02

    A method of preparing high temperature superconductor single crystals is disclosed. The method of preparation involves preparing precursor materials of a particular composition, heating the precursor material to achieve a peritectic mixture of peritectic liquid and crystals of the high temperature superconductor, cooling the peritectic mixture to quench directly the mixture on a porous, wettable inert substrate to wick off the peritectic liquid, leaving single crystals of the high temperature superconductor on the porous substrate. Alternatively, the peritectic mixture can be cooled to a solid mass and reheated on a porous, inert substrate to melt the matrix of peritectic fluid while leaving the crystals melted, allowing the wicking away of the peritectic liquid. 2 figs.

  16. Dispersion of optical activity of magnesium sulfite hexahydrate single crystals

    NASA Astrophysics Data System (ADS)

    Dimov, T.; Bunzarov, Zh; Iliev, I.; Petkova, P.; Tzoukrovski, Y.

    2010-11-01

    The magnesium sulfite hexahydrate (MgSO3.6H2O) crystals are unique because they are the only representative (with sodium periodate) of the crystallographic class C3 (without a center of symmetry). The crystal symmetry suggests presence of nonlinearity, piezo- and pyro-electric properties and gyrotropy as well. Single crystals of MgSO3.6H2O (pure and doped with Ni, Co and Zn) for the time being are grown only by the original method developed in the Laboratory for Crystal growth at the Faculty of Physics in Sofia University. The first results of optical activity of pure MgSO3.6H2O and Zn doped MgSO3.6H2O crystals are described and analyzed in a wide spectral range. The optical activity manifests itself in the direction (0001) as a rotation of the polarization plane.

  17. Serum free hemoglobin test

    MedlinePlus

    Blood hemoglobin; Serum hemoglobin ... Hemoglobin (Hb) is the main component of red blood cells. It is a protein that carries oxygen. ... people may contain up to 5 mg/dL hemoglobin. Normal value ranges may vary slightly among different ...

  18. Hemoglobin C disease

    MedlinePlus

    Clinical hemoglobin C ... Hemoglobin C is an abnormal type of hemoglobin, the protein in red blood cells that carries oxygen. It is ... Americans. You are more likely to have hemoglobin C disease if someone in your family has had ...

  19. Growth and characterization of lithium yttrium borate single crystals

    SciTech Connect

    Singh, A. K.; Singh, S. G.; Tyagi, M.; Desai, D. G.; Sen, Shashwati

    2014-04-24

    Single crystals of 0.1% Ce doped Li{sub 6}Y(BO{sub 3}){sub 3} have been grown using the Czochralski technique. The photoluminescence study of these crystals shows a broad emission at ∼ 420 nm corresponding to Ce{sub 3+} emission from 5d→4f energy levels. The decay profile of this emission shows a fast response of ∼ 28 ns which is highly desirable for detector applications.

  20. Isotropic behavior of an anisotropic material: single crystal silicon

    NASA Astrophysics Data System (ADS)

    McCarter, Douglas R.; Paquin, Roger A.

    2013-09-01

    Zero defect single crystal silicon (Single-Crystal Si), with its diamond cubic crystal structure, is completely isotropic in most properties important for advanced aerospace systems. This paper will identify behavior of the three most dominant planes of the Single-Crystal Si cube (110), (100) and (111). For example, thermal and optical properties are completely isotropic for any given plane. The elastic and mechanical properties however are direction dependent. But we show through finite element analysis that in spite of this, near-isotropic behavior can be achieved with component designs that utilize the optimum elastic modulus in directions with the highest loads. Using glass frit bonding to assemble these planes is the only bonding agent that doesn't degrade the performance of Single-Crystal Si. The most significant anisotropic property of Single-Crystal Si is the Young's modulus of elasticity. Literature values vary substantially around a value of 145 GPa. The truth is that while the maximum modulus is 185 GPa, the most useful <110< crystallographic direction has a high 169 GPa, still higher than that of many materials such as aluminum and invar. And since Poisson's ratio in this direction is an extremely low 0.064, distortion in the plane normal to the load is insignificant. While the minimum modulus is 130 GPa, a calculated average value is close to the optimum at approximately 160 GPa. The minimum modulus is therefore almost irrelevant. The (111) plane, referred to as the natural cleave plane survives impact that would overload the (110) and/or (100) plane due to its superior density. While mechanical properties vary from plane to plane each plane is uniform and response is predictable. Understanding the Single-Crystal Si diamond cube provides a design and manufacture path for building lightweight Single-Crystal Si systems with near-isotropic response to loads. It is clear then that near-isotropic elastic behavior is achievable in Single-Crystal Si

  1. Lithium niobate single-crystal and photo-functional device

    DOEpatents

    Gopalan, Venkatraman; Mitchell, Terrence E.; Kitamura, Kenji; Furukawa, Yasunori

    2001-01-01

    Provided are lithium niobate single-crystal that requires a low voltage of not larger than 10 kV/nm for its ferroelectric polarization inversion and of which the polarization can be periodically inverted with accuracy even at such a low voltage, and a photo-functional device comprising the crystal. The crystal has a molar fraction of Li.sub.2 O/(Nb.sub.2 O.sub.5 +Li.sub.2 O) of falling between 0.49 and 0.52. The photo-functional device can convert a laser ray being incident thereon.

  2. Skylab experiments on semiconductors and alkali halides. [single crystal growth

    NASA Technical Reports Server (NTRS)

    Lundquist, C. A.

    1974-01-01

    The space processing experiments performed during the Skylab missions included one on single crystal growth of germanium selenide and telluride, one on pure and doped germanium crystals, two on pure and doped indium antimonide, one on gallium-indium-antimony systems, and one on a sodium chloride-sodium fluoride eutectic. In each experiment, three ampoules of sample were processed in the multipurpose electric furnace within the Skylab Materials Processing Facility. All were successful in varying degrees and gave important information about crystal growth removed from the effects of earth surface gravity.

  3. Large Silver Halide Single Crystals as Charged Particle Track Detectors

    NASA Technical Reports Server (NTRS)

    Kusmiss, J. H.

    1972-01-01

    The trajectory of the particle is made visible under a microscope by the accumulation of metallic silver at regions of the lattice damaged by the particle. This decoration of the particle track is accomplished by exposure of the crystal to light. The decoration of normally present lattice imperfections such as dislocations can be suppressed by the addition to the crystal of less than ten parts per million of a suitable polyvalent metal impurity. An account of some preliminary attempts to grow thin single crystals of AgCl is given also, and suggestions for a more refined technique are offered.

  4. Low dimensional magnetic solids and single crystal elpasolites: Need for improved crystal growing techniques

    NASA Technical Reports Server (NTRS)

    Good, M. L.; Watkins, S.; Schwartz, R. W.

    1979-01-01

    The need for extensive crystal growing experiments to develop techniques for preparing crystals suitable for magnetic anisotropy measurements and detailed X-ray and neutron diffraction studies is rationalized on the basis of the unique magnetic properties of the materials and their hydrogen bonded structures which have many features in common with metalloenzyme and metalloprotein active sites. Single crystals of the single and mixed lanthanide species are prepared by the Bridgeman technique of gradient solidification of molten samples. The effects of crystal imperfections on the optical properties of these materials are an important part of the projected research. A series of a-amido acid complexes of first row transition metals were prepared which crystallize as infinite linear chains and exhibit low dimensional magnetic ordering (one or two) at temperature below 40 K.

  5. Single-Crystal Elasticity of Earth Materials: An Appraisal

    NASA Astrophysics Data System (ADS)

    Duffy, T. S.

    2015-12-01

    The elastic properties of minerals are of central importance for interpreting seismic data for the Earth's crust, mantle, and core. Mineral elasticity data also have more general applications towards understanding equations of state, phase equilibria, interatomic forces, material strength, and phase transitions. The singe-crystal elastic properties are the most generally useful as they provide complete information on the anisotropy of elastic moduli (e.g. Poisson's ratio, Young's modulus), sound velocities, and compressibility. Measurement of the full set of single-crystal elastic properties remains challenging especially for lower symmetry crystals. In this talk, I present an overview of our current understanding of single-crystal elasticity based on a newly constructed database of single-crystal elastic properties. At ambient conditions the full elastic tensor of about 150 minerals have now been measured, along with about another 60 related compounds that are not formally minerals. About two-thirds of the measured minerals are oxides or silicates. A limitation of the existing database is that only about 10% of the measurements are on crystals of monoclinic or triclinic symmetry, while these two systems account for about 40% of known minerals. Additionally, only a smaller subset of minerals have been examined at high pressure or temperature conditions. Several applications of the database will be presented emphasizing trends in elastic anisotropy. The pyroxenes will be used as an illustrative example.

  6. Growth of Solid Solution Single Crystals

    NASA Technical Reports Server (NTRS)

    Lehoczky, Sandor L.; Szofran, F. R.; Gillies, Donald C.; Watring, D. A.

    1999-01-01

    The solidification of a solid solution semiconductor, having a wide separation between liquidus and serious has been extensively studied in ground based, high magnetic field and Spacelab experiments. Two alloys of mercury cadmium telluride have been studied; mercury cadmium telluride with 80.0 mole percent of HgTe and 84.8 mole percent respectively. These alloys are extremely difficult to grow by directional solidification on earth due to high solutal and thermal density differences that give rise to fluid flow and consequent loss of interface shape and composition. Diffusion controlled growth is therefore impossible to achieve in conventional directional solidification. The ground based experiments consisted of growing crystals in several different configurations of heat pipe furnaces, NASA's Advanced Automated Directional Solidification Furnace (AADSF), and a similar furnace incorporated in a superconducting magnet capable of operating at up to 5T. The first microgravity experiment took place during the flight of STS-62 in March 1994, with the AADSF installed on the second United States Microgravity Payload (USMP-2). The alloy was solidified at 3/4 inch per day over a 9 day period, and for the first time a detailed evaluation was performed of residual acceleration effects. The second flight experiment took place in the fourth United States Microgravity Payload Mission (USMP-4) in November 1997. Due to contamination of the furnace system by a previously processed sample, the sample was not received until May 1998, and the preliminary analysis shows that the conditions prevailing during the experiment were quite different from the requirements requested prior to the mission. Early results are indicating that the sample may not accomplish the desired objectives. As with the USMP-2 mission, the results of the ground based experiments were compared with the crystal grown in orbit under microgravity conditions. On the earth, it has been demonstrated that the

  7. Effect of Crystal Orientation on Analysis of Single-Crystal, Nickel-Based Turbine Blade Superalloys

    NASA Technical Reports Server (NTRS)

    Swanson, G. R.; Arakere, N. K.

    2000-01-01

    High-cycle fatigue-induced failures in turbine and turbopump blades is a pervasive problem. Single-crystal nickel turbine blades are used because of their superior creep, stress rupture, melt resistance, and thermomechanical fatigue capabilities. Single-crystal materials have highly orthotropic properties making the position of the crystal lattice relative to the part geometry a significant and complicating factor. A fatigue failure criterion based on the maximum shear stress amplitude on the 24 octahedral and 6 cube slip systems is presented for single-crystal nickel superalloys (FCC crystal). This criterion greatly reduces the scatter in uniaxial fatigue data for PWA 1493 at 1,200 F in air. Additionally, single-crystal turbine blades used in the Space Shuttle main engine high pressure fuel turbopump/alternate turbopump are modeled using a three-dimensional finite element (FE) model. This model accounts for material orthotrophy and crystal orientation. Fatigue life of the blade tip is computed using FE stress results and the failure criterion that was developed. Stress analysis results in the blade attachment region are also presented. Results demonstrate that control of crystallographic orientation has the potential to significantly increase a component's resistance to fatigue crack growth without adding additional weight or cost.

  8. Constitutive modelling of single crystal and directionally solidified superalloys

    NASA Technical Reports Server (NTRS)

    Jordan, E. H.; Walker, K. P.

    1986-01-01

    The trend towards improved engine efficiency and durability places increasing demands on materials that operate in the hot section of the gas turbine engine. These demands are being met by new coatings and materials such as single crystal and directionally solidified nickel-base superalloys which have greater creep/fatigue resistance at elevated temperatures and reduced susceptibility to grain boundary creep, corrosion and oxidation than conventionally cast alloys. Work carried out as part of a research program aimed at the development of constitutive equations to describe the elevated temperature stress-strain-time behavior of single crystal and directionally solidified turbine blade superalloys is discussed. The program involves both development of suitable constitutive models and their verification through elevated temperature tension-torsion testing of single crystals of PWA 1480.

  9. Synthesis and properties of erbium oxide single crystals

    SciTech Connect

    Petrovic, J.J.; Romero, R.S.; Mendoza, D.; Kukla, A.M.; Hoover, R.C.; McClellan, K.J.

    1999-04-01

    Erbium oxide (Er{sub 2}O{sub 3}, erbia) is a highly stable cubic rare earth oxide with a high melting point of 2,430 C. Because of this, it may have potential applications where high temperature stability and corrosion resistance are required. However, relatively little is known about the properties of this oxide ceramic. The authors have employed a xenon optical floating zone unit with a temperature capability of 3,000 C to grow high quality single crystals of erbia. The conditions for single crystal growth of erbia have been established. The mechanical properties of erbia single crystals have been initially examined using microhardness indentation as a function of temperature.

  10. Ballistic penetration phenomenology of high symmetry single crystals

    NASA Astrophysics Data System (ADS)

    Kingman, Pat W.; Herring, Rodney A.

    1995-02-01

    The ballistic performance of tungsten single crystal penetrators is known to be a function of crystallographic symmetry. The macroscopic deformation geometry of both single crystal and polycrystal tungsten penetrators is a continuous eversion of the rod into a hollow tube. The differences in energy partitioning leading to these variations in ballistic performance must therefore be accounted for by detailed material deformation processes governed by crystallographic orientation. Inferences about these processes have been drawn from microstructural characterization of recovered penetrators. Residual penetrators of both 011 and 111 orientations were found to have repeatedly deformed and recrystalized, but the actual operative processes led to quite different macrostructures, microstructures, and penetration depths. The 001 orientation deformed by a unique process which allowed very efficient deformation, resulting in maximum penetration depth. These single crystal experiments demonstrate the critical role of detailed deformation processes in determining the final penetration depths even when similar macroscopic material flow geometry occurs.

  11. Preparation and characterization of single-crystal aluminum nitride substrates

    SciTech Connect

    Schowalter, L.J.; Rojo, J.C.; Yakolev, N.; Shusterman, Y.; Dovidenko, K.; Wang, R.; Bhat, I.; Slack, G.A.

    2000-07-01

    Large (up to 10mm diameter) aluminum nitride (AlN) boules have been grown by the sublimation-recondensation method to study the preparation of high-quality single crystal substrates. The growth mechanism of the boules has been studied using AFM. It has been determined that large single crystal grains in those boules grow with a density of screw dislocations below 5 x 10{sup 4} cm{sup {minus}3} while edge dislocations are at lower density (none were observed). High-quality AlN single crystal substrates for epitaxial growth have been prepared and characterized using Chemical Mechanical Polishing (CMP) and AFM imaging, respectively. Also, the differential etching effect of KOH solutions on the N and Al-terminated faces of AlN on vicinal c-faces has been investigated. In order to identify the N or Al-terminated face, convergent beam electron diffraction has been used.

  12. Single Crystal Synthesis and STM Studies of High Temperature Superconductors

    NASA Technical Reports Server (NTRS)

    Barrientos, Alfonso

    1997-01-01

    This is a final report for the work initiated in September of 1994 under the grant NAG8-1085 - NASA/OMU, on the fabrication of bulk and single crystal synthesis, specific heat measuring and STM studies of high temperature superconductors. Efforts were made to fabricate bulk and single crystals of mercury based superconducting material. A systematic thermal analysis on the precursors for the corresponding oxides and carbonates were carried out to synthesized bulk samples. Bulk material was used as seed in an attempt to grow single crystals by a two-step self flux process. On the other hand bulk samples were characterized by x-ray diffraction, electrical resistivity and magnetic susceptibility, We studied the specific heat behavior in the range from 80 to 300 K. Some preliminary attempts were made to study the atomic morphology of our samples. As part of our efforts we built an ac susceptibility apparatus for measuring the transition temperature of our sintered samples.

  13. The Load Capability of Piezoelectric Single Crystal Actuators

    NASA Technical Reports Server (NTRS)

    Xu, Tian-Bing; Su, Ji; Jiang, Xiaoning; Rehrig, Paul W.; Hackenberger, Wesley S.

    2006-01-01

    Piezoelectric lead magnesium niobate-lead titanate (PMN-PT) single crystal is one of the most promising materials for electromechanical device applications due to its high electrical field induced strain and high electromechanical coupling factor. PMN-PT single crystal-based multilayer stack actuators and multilayer stack-based flextensional actuators have exhibited high stroke and high displacement-voltage ratios. The actuation capabilities of these two actuators were evaluated using a newly developed method based upon a laser vibrometer system under various loading conditions. The measured displacements as a function of mechanical loads at different driving voltages indicate that the displacement response of the actuators is approximately constant under broad ranges of mechanical load. The load capabilities of these PMN-PT single crystal-based actuators and the advantages of the capability for applications will be discussed.

  14. The Load Capability of Piezoelectric Single Crystal Actuators

    NASA Technical Reports Server (NTRS)

    Xu, Tian-Bing; Su, Ji; Jiang, Xiaoning; Rehrig, Paul W.; Hackenberger, Wesley S.

    2007-01-01

    Piezoelectric lead magnesium niobate-lead titanate (PMN-PT) single crystal is one of the most promising materials for electromechanical device applications due to its high electrical field induced strain and high electromechanical coupling factor. PMN-PT single crystal-based multilayer stack actuators and multilayer stack-based flextensional actuators have exhibited high stroke and high displacement-voltage ratios. The actuation capabilities of these two actuators were evaluated using a newly developed method based upon a laser vibrometer system under various loading conditions. The measured displacements as a function of mechanical loads at different driving voltages indicate that the displacement response of the actuators is approximately constant under broad ranges of mechanical load. The load capabilities of these PMN-PT single crystal-based actuators and the advantages of the capability for applications will be discussed.

  15. Magnetically recyclable polymer single crystal supported silver nanocatalyst.

    PubMed

    Shi, Lili; Liu, Mei; Liu, Limei; Gao, Wenlong; Su, Miaoda; Ge, Ya; Zhang, Hui; Dong, Bin

    2014-11-11

    We report the immobilization of unprotected silver nanoparticle on the carboxylic acid abundant polymer single crystal surface with controllable size through photogenerated chemical reduction reaction. The resulting silver nanoparticle decorated polymer single crystal not only shows higher catalytic activity as compared to its counterpart bearing surface ligand but also exhibits size-dependent catalytic activity with the smallest size (∼1.5 nm) being the most active. By further introducing iron oxide nanoparticles onto its surface, the resulting catalyst system can be magnetically recycled for up to five times with little loss in catalytic activity. These, together with the high loading originated from the high surface area to volume ratio for a polymer single crystal, make current catalyst system attractive for many industrial important catalytic applications.

  16. Anisotropy of nickel-base superalloy single crystals

    NASA Technical Reports Server (NTRS)

    Mackay, R. A.; Dreshfield, R. L.; Maier, R. D.

    1980-01-01

    The influence of orientation on the tensile and stress rupture behavior of 52 Mar-M247 single crystals was studied. Tensile tests were performed at temperatures between 23 and 1093 C; stress rupture behavior was examined between 760 and 1038 C. The mechanical behavior of the single crystals was rationalized on the basis of the Schmid factor contours for the operative slip systems and the lattice rotations which the crystals underwent during deformation. The tensile properties correlated well with the appropriate Schmid factor contours. The stress rupture lives at lower testing temperatures were greatly influenced by the lattice rotations required to produce cross slip. A unified analysis was attained for the stress rupture life data generated for the Mar-M247 single crystals at 760 and 774 C under a stress of 724 MPa and the data reported for Mar-M200 single crystals tested at 760 C under a stress of 689 MPa. Based on this analysis, the stereographic triangle was divided into several regions which were rank ordered according to stress rupture life for this temperature regime.

  17. Crystal growth and characterization of new semiorganic nonlinear optical single crystals

    NASA Astrophysics Data System (ADS)

    Kulshrestha, Shobha; Shrivastava, A. K.

    2016-05-01

    An organic material of a L-histidine monohydrochloride single crystal was grown in a distilled water solution using the slow evaporation method at 40-45°C. The grown crystal was transparent and colourless, with a size of about 20 × 9 × 5 mm3, obtained within a period of 21 days. The solubility of grown crystals have found out at various temperatures. The UV-visible transmittance studies show that the grown crystals have wide optical transparency in the entire visible region It is observed that the crystal has transparency window from 255nm to 700nm and its energy gap (Eg) found to be is 3.1eV. The grown crystal was subjected to powder X-ray diffraction analysis, confirming that the orthorhombic crystalline nature of the crystal. To identify the surface morphology, the as grown crystal was subjected to FE-SEM technique. The chemical composition of the grown crystal was estimated by Energy dispersive X-ray analysis. The optical behaviour of the grown crystal was analyzed by PL study.

  18. Imaging linear polarimetry using a single ferroelectric liquid crystal modulator.

    PubMed

    Gendre, Luc; Foulonneau, Alban; Bigué, Laurent

    2010-09-01

    In the field of polarimetry, ferroelectric liquid crystal cells are mostly used as bistable polarization rotators suitable to analyze crossed polarizations. This paper shows that, provided such a cell is used at its nominal wavelength and correctly driven, its behavior is close to that of a tunable half-wave plate, and it can be used with much benefit in lightweight imaging polarimetric setups. A partial Stokes polarimeter using a single digital video camera and a single ferroelectric liquid crystal modulator is designed and implemented for linear polarization analysis. Polarization azimuthal angle and degree of linear polarization are available at 150 frames per second with a good accuracy. PMID:20820209

  19. Apparatus And Method For Producing Single Crystal Metallic Objects

    DOEpatents

    Huang, Shyh-Chin; Gigliotti, Jr., Michael Francis X.; Rutkowski, Stephen Francis; Petterson, Roger John; Svec, Paul Steven

    2006-03-14

    A mold is provided for enabling casting of single crystal metallic articles including a part-defining cavity, a sorter passage positioned vertically beneath and in fluid communication with the part-defining cavity, and a seed cavity positioned vertically beneath and in fluid communication with the sorter passage. The sorter passage includes a shape suitable for encouraging a single crystal structure in solidifying molten metal. Additionally, a portion of the mold between the sorter passage and the part-defining cavity includes a notch for facilitating breakage of a cast article proximate the notch during thermal stress build-up, so as to prevent mold breakage or the inclusion of part defects.

  20. How a silver dendritic mesocrystal converts to a single crystal

    SciTech Connect

    Fang, J.; Ding, B.; Song, X.; Han, Y.

    2008-05-02

    In this paper, we demonstrate how a silver dendrite transforms from mesocrystal into single crystal and the stability for a dendritic silver mesocrystal within a Sn/AgNO3 galvanic replacement reaction. Our findings provide the direct evidence and visible picture of the transformation from mesocrystal to single crystalline structure and further confirm the particle-mediated crystallization mechanism. At the initial stage of the transformation, there is a crystallographic fusion process, dominated by oriented attachment mechanism. Ostwald ripening also plays an important role in forming smooth surface and regular shape of the final nanocrystal.

  1. Lead pyrovanadate single crystal as a new SRS material

    SciTech Connect

    Basiev, Tasoltan T; Voronko, Yu K; Maslov, Vladislav A; Sobol, A A; Shukshin, V E

    2011-02-28

    Lead pyrovanadate Pb{sub 2}V{sub 2}O{sub 7} single crystals of optical quality suitable for laser experiments are obtained. Vibrational modes are identified based on the analysis of the polarised Raman spectra of the single crystals. The main parameters (width at half maximum, peak and integral intensities) of the spectral lines most promising for SRS conversion in this material are estimated. These parameters are compared with the corresponding parameters of the most frequently used lines of known Raman materials: yttrium and gadolinium vanadates, potassium and lead tungstates, and lead molybdate. (active media)

  2. Two-photon-induced singlet fission in rubrene single crystal.

    PubMed

    Ma, Lin; Galstyan, Gegham; Zhang, Keke; Kloc, Christian; Sun, Handong; Soci, Cesare; Michel-Beyerle, Maria E; Gurzadyan, Gagik G

    2013-05-14

    The two-photon-induced singlet fission was observed in rubrene single crystal and studied by use of femtosecond pump-probe spectroscopy. The location of two-photon excited states was obtained from the nondegenerate two-photon absorption (TPA) spectrum. Time evolution of the two-photon-induced transient absorption spectra reveals the direct singlet fission from the two-photon excited states. The TPA absorption coefficient of rubrene single crystal is 52 cm∕GW at 740 nm, as obtained from Z-scan measurements. Quantum chemical calculations based on time-dependent density functional theory support our experimental data. PMID:23676057

  3. Structural and optical properties of a new chalcone single crystal

    NASA Astrophysics Data System (ADS)

    Rajesh Kumar, P. C.; Ravindrachary, V.; Janardhana, K.; Poojary, Boja

    2012-09-01

    A new nonlinear optical material 1-(4-methylthiophenyl)-3-(4-methoxyphenyl)prop-2-en-1-one with molecular formula C17H16O2S was synthesized by using the Claisen-Schmidt condensation reaction method. The Various functional groups present in the compound were identified using recorded FT-IR spectrum. The crystal growth parameters have been studied using solubility test and acetone is found to be a very good solvent for the crystal growth at an ambient temperature. The transparent high quality single crystals up to a size of 26×2×2 mm3 were grown using the slow evaporation solution growth technique. UV-visible study was carried out and the spectrum reveals that the crystal is transparent in the entire visible region and absorptive in the UV region. The refractive index is determined using Brewster's angle method. The optical energy band gap of the material is measured using Tauc's plot and the direct method. The single crystal XRD of MMPP crystal shows the following cell parameters: a=5.9626(2) Å, b=15.3022(6) Å, c=16.0385(7) Å, α=β=γ=90°, volume=1463.37(10) Å3 with a space group of Pna21. The compound MMPP exhibits optical nonlinearity (NLO) and its second order NLO efficiency is 3.15 times to that of urea. The effect of functional groups OCH3 and SCH3 on the non-linearity as well as the structural property of the compound has been discussed. The crystal is thermally stable. High NLO efficiency, good thermal stability, good transparency and ability to grow as a high quality single crystal make this material very attractive for opto-electronic applications.

  4. Growth of Solid Solution Single Crystals

    NASA Technical Reports Server (NTRS)

    Lehoczky, Sandor L.; Szofran, F. R.; Gillies, Donald C.

    2001-01-01

    The solidification of a solid solution semiconductor, having a wide separation between liquidus and solidus has been extensively studied in ground based, high magnetic field and Spacelab experiments. Two alloys of mercury cadmium telluride have been studied; with 80.0 mole percent of HgTe and 84.8 mole percent of HgTe respectively, the remainder being cadmium telluride. Such alloys are extremely difficult to grow by directional solidification on earth due to high solutal and thermal density differences that give rise to fluid flow and consequent loss of interface shape and composition. Diffusion controlled growth is therefore impossible to achieve in conventional directional solidification. The ground based experiments consisted of growing crystals in several different configurations of heat pipe furnaces, NASA's Advanced Automated Directional Solidification Furnace (AADSF), and a similar furnace incorporated in a superconducting magnet capable of operating at up to 5T. The first microgravity experiment took place during the flight of STS-62 in March 1994, with the AADSF installed on the second United States Microgravity Payload (USMP-2). The alloy was solidified at 3/4 inch per day over a 9 day period, and for the first time a detailed evaluation was performed correlating composition variations to measured residual acceleration. The second flight experiment took place in the fourth United States Microgravity Payload Mission (USMP-4) in November 1997. Due to contamination of the furnace system, analysis shows that the conditions prevailing during the experiment were quite different from the requirements requested prior to the mission. The results indicate that the sample did accomplish the desired objectives.

  5. Deformation of ⊥m single quartz crystals

    NASA Astrophysics Data System (ADS)

    Krasner, P.; Holyoke, C. W., III; Kronenberg, A. K.

    2015-12-01

    The rheology of quartz deformed by dislocation creep is essential to understanding the strength of the mid to lower continental crust. Our current understanding of quartz rheology is derived primarily from studies of polycrystalline quartz and little is known about the temperature, strain rate, or water dependence of the individual quartz slip systems. In order to better understand the rheology of quartz slip systems, we have deformed synthetic quartz single crystals with the prism oriented at 45° to the compression direction (⊥m orientation). We converted the gel-type water found in synthetic quartz crystals to free water fluid inclusions, similar to water observed in milky quartz crystals, by annealing the crystals at 900°C/0.1 MPa for 24 hours. The single crystals were deformed at a confining pressure of 1.5 GPa with temperatures of 850 to 1000°C and strain rates of 10-6 to 10-4/s. FTIR measurements of water concentrations in the starting material, annealed synthetic crystals and deformed synthetic quartz crystals indicate that the water concentrations (125-300 H/106Si) are not affected by the annealing process or deformation. However, the spectra in the annealed and deformed samples are similar to those of natural milky quartz rather than those of synthetic quartz. Results of temperature and strain rate stepping experiments indicate that the strength of the crystals decreases with increasing temperature and/or decreasing strain rate. Undulatory extinction is the predominant microstructure observed in deformed samples, which is consistent with deformation by dislocation creep. The strength of the ⊥m oriented quartz crystals deformed in this study with free water is greater than those of the studies of synthetic quartz with gel type water (Linker and Kirby, 1981 and Muto et al., 2011).

  6. Role of crystal orientation on chemical mechanical polishing of single crystal copper

    NASA Astrophysics Data System (ADS)

    Zhu, Aibin; He, Dayong; Luo, Wencheng; Liu, Yangyang

    2016-11-01

    The material removal mechanism of single crystal copper in chemical mechanical polishing (CMP) has not been intensively investigated. And the role of crystal orientation in CMP of single crystal cooper is not quite clear yet. Quasi-continuum method was adopted in this paper to simulate the process of nano-particles grinding on single crystal copper in CMP process. Three different crystal orientations, i.e. x[100]y[001], x[001]y[110] and x[-211]y[111], were chosen for analysis. The atom displacement diagrams, stress distribution diagrams and load-displacement curves were obtained. After analyzing the deformation mechanism, residual stress of the work piece material and cutting force, results showed that, the crystal orientation of work piece has great influence on the deformation characteristics and surface quality of work piece during polishing. In the A(001)[100] orientation, the residual stress distribution after polishing is deeper, and the stress is larger than that in the B(110)[001] and C(111)[-211] orientations. And the average tangential cutting force in the A(001)[100] orientation is much larger than those in the other two crystal orientation. This research is helpful to revealing the material removal mechanism of CMP process.

  7. Ultrasonic characterization of single crystal langatate

    NASA Astrophysics Data System (ADS)

    Sturtevant, Blake T.

    Langatate (LGT), a synthetic piezoelectric crystal with chemical composition La3Ga5.5Ta0.5O14, has recently received significant interest in the sensor and frequency control communities as a possible alternative to quartz owing to its higher piezoelectric coupling, structural stability up to 1400°C and presence of temperature compensated acoustic wave (AW) orientations. With these exciting properties, LGT is expected to find applications in AW sensor, timing, and frequency control. This thesis focuses on the characterization of the acoustic wave material properties of LGT up to 120°C. Such a characterization is critical for the design and fabrication of LGT acoustic wave devices. The elastic and piezoelectric constants were determined through measurements of bulk acoustic wave phase velocities by two independent methods, the pulse echo overlap technique and a combined resonance technique. The extracted constants and temperature coefficients enabled the identification of a range of particularly interesting LGT surface acoustic wave (SAW) orientations with Euler angles (90°, 23°, 118-124°) that exhibits predicted electromechanical coupling up to 0.7% and reduced or zero temperature coefficient of delay (TCD). The consistency of the determined constants and temperature coefficients was established using SAW measurements of seven crystallographic orientations at temperatures ranging up to 120°C. Measured SAW phase velocities and TCDs were found to be in agreement with predictions based on the determined constants. Two of the seven SAW orientations exhibited temperature compensation within 40°C of room temperature, agreeing with predictions. Deposition of SiAlON films on top of LGT SAW devices for surface protection in chemically and mechanically harsh environments was also investigated. SiAlON films deposited by reactive RF magnetron co-sputtering of Al and Si targets were controlled to within a few percent for film thickness and composition. SiAlON thin film

  8. Roflumilast - A reversible single-crystal to single-crystal phase transition at 50 °C

    NASA Astrophysics Data System (ADS)

    Viertelhaus, Martin; Holst, Hans Christof; Volz, Jürgen; Hummel, Rolf-Peter

    2013-01-01

    Roflumilast is a selective phosphodiesterase type 4 inhibitor and is marketed under the brand names Daxas®, Daliresp® and Libertec®. A phase transition of the drug substance roflumilast was observed at 50 °C. The low temperature form, the high temperature form and the phase transition were characterised by differential scanning calorimetry, variable temperature powder X-ray diffraction and single crystal X-ray diffraction, Raman spectroscopy and solid state NMR spectroscopy. The phase transition of roflumilast at 50 °C is completely reversible, the high temperature form cannot be stabilised by quench cooling and the phase transition does not influence the quality of the active pharmaceutical ingredient (API) and the drug product. It was observed to be a single crystal to single crystal phase transition.

  9. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

    PubMed Central

    Saidaminov, Makhsud I.; Abdelhady, Ahmed L.; Murali, Banavoth; Alarousu, Erkki; Burlakov, Victor M.; Peng, Wei; Dursun, Ibrahim; Wang, Lingfei; He, Yao; Maculan, Giacomo; Goriely, Alain; Wu, Tom; Mohammed, Omar F.; Bakr, Osman M.

    2015-01-01

    Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA=CH3NH3+, X=Br− or I−) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at elevated temperatures. The crystals can be both size- and shape-controlled by manipulating the different crystallization parameters. Despite the rapidity of the method, the grown crystals exhibit transport properties and trap densities comparable to the highest quality MAPbX3 reported to date. The phenomenon of inverse or retrograde solubility and its correlated inverse temperature crystallization strategy present a major step forward for advancing the field on perovskite crystallization. PMID:26145157

  10. Water molecule-driven reversible single-crystal to single-crystal transformation of a multi-metallic coordination polymer with controllable metal ion movement.

    PubMed

    Niu, Zheng; Ma, Jian-Gong; Shi, Wei; Cheng, Peng

    2014-02-21

    A single-crystal to single-crystal (SC-SC) transformation process driven by water molecules has been exhibited by a multi-metallic coordination polymer. The in situ heating single crystal X-ray diffraction technique was applied to study the control of metal ion movement in the reversible SC-SC transformation process.

  11. Relaxor-PT Single crystals: Observations and Developments

    PubMed Central

    Zhang, Shujun; Shrout, Thomas R.

    2011-01-01

    Relaxor-PT based ferroelectric single crystals Pb(Zn1/3Nb2/3)O3–PbTiO3 (PZNT) and Pb(Mg1/3Nb2/3)O3–PbTiO3 (PMNT) attracted lot of attentions in last decade due to their ultra high electromechanical coupling factors and piezoelectric coefficients. However, owing to a strongly curved morphotropic phase boundary (MPB), the usage temperature of these perovskite single crystals is limited by TRT - the rhombohedral to tetragonal phase transition temperature, which occurs at significantly lower temperatures than the Curie temperature TC. Furthermore, the low mechanical quality factors and coercive fields of these crystals, usually being on the order of ~70 and 2–3kV/cm, respectively, restrict their usage in high power applications. Thus, it is desirable to have high performance crystals with high temperature usage range and high power characteristics. In this survey, different binary and ternary crystal systems were explored, with respect to their temperature usage range, general trends of dielectric and piezoelectric properties of relaxor-PT crystal systems were discussed related to their TC/TRT. In addition, two approaches were proposed to improve mechanical Q values, including acceptor dopant strategy, analogous to “hard” polycrystalline ceramics, and anisotropic domain engineering configurations. PMID:20889397

  12. Linear and NLO properties of an organic single crystal

    NASA Astrophysics Data System (ADS)

    Rajesh Kumara, P. C.; Ravindrachary, V.; Janardhana, K.; Poojary, Boja; Manjunath, K. B.; Umesh, G.

    2012-06-01

    Organic compound of 1-(4-methoxyphenyl)-3-(2-methoxy 5-bromophenyl)prop-2-en-1-one [MMBPP] with molecular formula C16H11BrO3 was synthesized using Schmidt condensation method. A FT-IR spectrum was recorded to identify the various functional groups present in the compound. The single crystals were grown using slow evaporation solution growth technique. The high quality transparent crystals up to a size 10×7×5 mm3 are obtained with in fifteen days. UV-Visible spectrum reveals that the crystal is transparent in the entire visible region. The single crystal XRD study shows that the compound crystallizes in orthorhombic crystal system with a space group P212121 and the observed cell parameters are a =7.6095(13) Å, b =13.049(2) Å, c = 15.525(3) Å, Volume 1541.6(5) Å3. The third order Nonlinearity was confirmed by Z-scan technique and non-linear parameters were determined.

  13. Growth and spectroscopic properties of samarium oxalate single crystals

    NASA Astrophysics Data System (ADS)

    Vimal, G.; Mani, Kamal P.; Jose, Gijo; Biju, P. R.; Joseph, Cyriac; Unnikrishnan, N. V.; Ittyachen, M. A.

    2014-10-01

    Single crystals of samarium oxalate decahydrate were synthesized using single diffusion gel technique and the conditions influencing the size, shape and quality were optimized. Highly transparent crystals of size 3×2×1 mm3 with a well defined hexagonal morphology were grown during a time period of two weeks. X ray powder diffraction analysis revealed that the grown crystals crystallize in the monoclinic system with space group P21/c and the proposed chemical formula and linkage of water molecules were confirmed using thermogravimetric analysis. The various functional groups of the oxalate ligand and the water of crystallization were identified by Fourier transform infrared spectroscopy. Spectroscopic investigations such as electric dipole transition probability, magnetic dipole transition probability and branching ratios of all possible transitions from 4G5/2 level of Sm3+ ions were estimated from the absorption spectra using JO theory. The spectroscopic analysis suggested that the crystal has a strong and efficient orange red emission. This is confirmed from the photoluminescence spectrum with a wavelength peak at 595 nm and hence this promising emission can be effectively used for optical amplification.

  14. Fretting Stresses in Single Crystal Superalloy Turbine Blade Attachments

    NASA Technical Reports Server (NTRS)

    Arakere, Nagaraj K.; Swanson, Gregory

    2000-01-01

    Single crystal nickel base superalloy turbine blades are being utilized in rocket engine turbopumps and turbine engines because of their superior creep, stress rupture, melt resistance and thermomechanical fatigue capabilities over polycrystalline alloys. Currently the most widely used single crystal nickel base turbine blade superalloys are PWA 1480/1493 and PWA 1484. These alloys play an important role in commercial, military and space propulsion systems. High Cycle Fatigue (HCF) induced failures in aircraft gas turbine and rocket engine turbopump blades is a pervasive problem. Blade attachment regions are prone to fretting fatigue failures. Single crystal nickel base superalloy turbine blades are especially prone to fretting damage because the subsurface shear stresses induced by fretting action at the attachment regions can result in crystallographic initiation and crack growth along octahedral planes. Furthermore, crystallographic crack growth on octahedral planes under fretting induced mixed mode loading can be an order of magnitude faster than under pure mode I loading. This paper presents contact stress evaluation in the attachment region for single crystal turbine blades used in the NASA alternate Advanced High Pressure Fuel Turbo Pump (HPFTP/AT) for the Space Shuttle Main Engine (SSME). Single crystal materials have highly orthotropic properties making the position of the crystal lattice relative to the part geometry a significant factor in the overall analysis. Blades and the attachment region are modeled using a large-scale 3D finite element (FE) model capable of accounting for contact friction, material orthotrophy, and variation in primary and secondary crystal orientation. Contact stress analysis in the blade attachment regions is presented as a function of coefficient of friction and primary and secondary crystal orientation, Stress results are used to discuss fretting fatigue failure analysis of SSME blades. Attachment stresses are seen to reach

  15. Anisotropic thermal conductivity in single crystal β-gallium oxide

    NASA Astrophysics Data System (ADS)

    Guo, Zhi; Verma, Amit; Wu, Xufei; Sun, Fangyuan; Hickman, Austin; Masui, Takekazu; Kuramata, Akito; Higashiwaki, Masataka; Jena, Debdeep; Luo, Tengfei

    2015-03-01

    The thermal conductivities of β-Ga2O3 single crystals along four different crystal directions were measured in the temperature range of 80-495 K using the time domain thermoreflectance method. A large anisotropy was found. At room temperature, the [010] direction has the highest thermal conductivity of 27.0 ± 2.0 W/mK, while that along the [100] direction has the lowest value of 10.9 ± 1.0 W/mK. At high temperatures, the thermal conductivity follows a ˜1/T relationship characteristic of Umklapp phonon scattering, indicating phonon-dominated heat transport in the β-Ga2O3 crystal. The measured experimental thermal conductivity is supported by first-principles calculations, which suggest that the anisotropy in thermal conductivity is due to the differences of the speed of sound along different crystal directions.

  16. Polymer single crystal membrane from liquid/liquid interface

    NASA Astrophysics Data System (ADS)

    Wang, Wenda; Li, Christopher; Soft Matter Research Group-Drexel University Team

    2013-03-01

    Vesicles, mimicking the structure of cell membrane at the molecular scale, are small membrane-enclosed sacks that can store or transport substances. The weak mechanical properties and the nature of environment-sensitivity of the current available vesicles: liposomes, polymersomes, colloidsomes limit their applications as an excellent candidate for targeting delivery of drugs/genes in biomedical engineering and treatment. Recently, we developed an emulsion-based method to grow curved polymer single crystals. Varying the polymer concentration and/or the emulsification conditions (such as surfactant concentration, water-oil volume ratio), curved crystals with different sizes and different openness could be obtained. This growing process was attributed to polymer crystal growth along the liquid/liquid interface. In addition, the liquid/liquid interfacial crystal growth is promising for synthesis of enclosed hollow sphere.

  17. Growth of ninhydrin single crystal and its characterization

    NASA Astrophysics Data System (ADS)

    Uma Devi, T.; Lawrence, N.; Ramesh Babu, R.; Ramamurthi, K.; Bhagavannarayana, G.

    2009-01-01

    A novel organic nonlinear optical crystal ninhydrin having good optical quality was grown by solution technique using aqua solution. The quality of the crystal was also examined by high-resolution X-ray diffraction study. Solubility studies were made at different temperatures. Functional groups present in the grown material were identified from the vibrational frequencies of recorded FTIR spectrum. Transmittance of the crystal was recorded using the UV-vis-NIR spectrophotometer. From the thermal analysis it was observed that the material exhibits single sharp melting point. The fluorescence spectrum of ninhydrin was recorded. The Vicker's microhardness values were measured for the grown crystal. Second harmonic generation conversion efficiency estimated using Kurtz and Perry method is about five times that of KDP.

  18. Macroscale Janus polymer single crystal film and its wettability analysis

    NASA Astrophysics Data System (ADS)

    Qi, Hao; Wang, Wenda; Zhou, Tian; Li, Christopher

    2014-03-01

    Liquid-liquid interface between two immiscible solvents is crucial to studying amphiphile and colloidal self-assembly. It can also guide chain folding during the crystallization process. In this presentation, we show that crystallization of dicarboxy end functionalized poly(ɛ-caprolactone) at water/pentyl acetate interface result in millimeter scale, uniform polymer single crystal (PSC) film. Due to the asymmetric nature at the liquid-liquid interface, the PSC film exhibit Janus property - a hydrophobic side and a hydrophilic side, which is confirmed by in-situ nano-condensation experiment using an environmental scanning electron microscope. The thickness of the PSC film changes with different polymer solution concentration, revealing a surface tension dominated crystallization process.

  19. Monte Carlo simulations of single crystals from polymer solutions

    NASA Astrophysics Data System (ADS)

    Zhang, Jianing; Muthukumar, M.

    2007-06-01

    A novel "anisotropic aggregation" model is proposed to simulate nucleation and growth of polymer single crystals as functions of temperature and polymer concentration in dilute solutions. Prefolded chains in a dilute solution are assumed to aggregate at a seed nucleus with an anisotropic interaction by a reversible adsorption/desorption mechanism, with temperature, concentration, and seed size being the control variables. The Monte Carlo results of this model resolve the long-standing dilemma regarding the kinetic and thermal roughenings, by producing a rough-flat-rough transition in the crystal morphology with increasing temperature. It is found that the crystal growth rate varies nonlinearly with temperature and concentration without any marked transitions among any regimes of polymer crystallization kinetics. The induction time increases with decreasing the seed nucleus size, increasing temperature, or decreasing concentration. The apparent critical nucleus size is found to increase exponentially with increasing temperature or decreasing concentration, leading to a critical nucleus diagram composed in the temperature-concentration plane with three regions of different nucleation barriers: no growth, nucleation and growth, and spontaneous growth. Melting temperatures as functions of the crystal size, heating rate, and concentration are also reported. The present model, falling in the same category of small molecular crystallization with anisotropic interactions, captures most of the phenomenology of polymer crystallization in dilute solutions.

  20. Modified single crystals for high-power underwater projectors.

    PubMed

    Sherlock, Nevin P; Meyer, Richard J

    2012-06-01

    Underwater electroacoustic projectors using single crystals based on the lead magnesium niobate-lead titanate (PMNT) composition were investigated. The large electromechanical coupling coefficient (k(33) > 0.90) and piezoelectric coefficient (d(33) > 1500 pC/N) of PMNT have been demonstrated to improve transducer bandwidth and source level relative to conventional piezoelectric ceramics. The low mechanical quality factor (Q(M) < 200) and low temperature stability (T(RT) < 95°C) of PMNT, however, limit its utility in high-power, high-duty-cycle applications. Use of modified single crystals was shown to result in transducers which exhibit up to 5 dB improvement in source level over PMNT when operated at resonance. Compared with a PZT4 transducer, these modified crystals offer similar source level and power handling capability at resonance, but the available bandwidth is doubled and a 6 dB improvement in maximum source level is achieved when driven off resonance.

  1. Deformation of single crystal Hadfield steel by twinning and slip

    SciTech Connect

    Karaman, I.; Sehitoglu, H.; Gall, K.; Chumlyakov, Y.I.; Maier, H.J.

    2000-04-03

    The stress-strain behavior of Hadfield steel (Fe, 12.34 Mn, 1.03 C, in wt%) single crystals was studied for selected crystallographic orientations ([{bar 1}11 ], [001] and [{bar 1}23]) under tension and compression. The overall stress-strain response was strongly dependent on the crystallographic orientation and applied stress direction. Transmission electron microscopy and in situ optical microscopy demonstrated that twinning is the dominant deformation mechanism in [{bar 1}11] crystals subjected to tension, and [001] crystals subjected to compression at the onset of inelastic deformation. In the orientations that experience twinning, the activation of multiple twinning systems produces a higher strain-hardening coefficient than observed in typical f.c.c. alloys. Based on these experimental observations, a model is presented that predicts the orientation and stress direction effects on the critical stress for initiating twinning. The model incorporates the role of local pile-up stresses, stacking fault energy, the influence of the applied stress on the separation of partial dislocations, and the increase in the friction stress due to a high solute concentration. On the other hand, multiple slip was determined to be the dominant deformation mechanism in [{bar 1}11] crystals subjected to compression, and [001] crystals deformed under tension. Furthermore, the [{bar 1}23] crystals experience single slip in both tension and compression with planar type dislocations. Using electron back-scattered diffraction patterns, macroscopic shear bands (MSBs) were identified with a misorientation of 9 {degree} in the compressed [{bar 1}11] single crystals at strains as low as 1%.

  2. Growth, mechanical, thermal and dielectric properties of pure and doped KHP single crystal

    NASA Astrophysics Data System (ADS)

    M, Lakshmipriya.; Babu, D. Rajan; Vizhi, R. Ezhil

    2015-06-01

    L-Arginine doped potassium hydrogen phthalate and L-Histidine doped potassium hydrogen phthalate single crystals were grown by slow evaporation method at room temperature. The grown crystal crystallizes in orthorhombic system which is confirmed by single crystal XRD analysis. The grown crystals are subjected to thermal, mechanical and dielectric analysis.

  3. Room Temperature Single-Photon Source: Single-Dye Molecule Fluorescence in Liquid Crystal Host

    SciTech Connect

    Lukishova, S.G.; Schmid, A.W.; McNamara, A.J.; Boyd, R.W.; Stroud, C.R.Jr.

    2003-12-31

    OAK-(B204)We report on new approaches toward an implementation of an efficient, room temperature, deterministically polarized, single-photon source (SPS) on demand-a key hardware element for quantum information and quantum communication. Operation of a room temperature SPS is demonstrated via photon antibunching in the fluorescence from single terrylene-dye molecules embedded in a cholesteric liquid crystal host. Using oxygen-depleted liquid crystal hosts, dye-bleaching was avoided over the course of more than 1 h of continuous 532-nm excitation. Liquid crystal hosts (including liquid crystal oligomers/polymers) permit further increase of the efficiency of the source: (1) by aligning the dye molecules along a direction preferable for the maximum excitation efficiency; (2) by tuning a one-dimensional (1-D) photonic-band-gap microcavity of planar-aligned cholesteric (chiral nematic) liquid crystal layer to the dye fluorescence band.

  4. Long-Term Single and Joint Effects of Excessive Daytime Napping on the HOMA-IR Index and Glycosylated Hemoglobin

    PubMed Central

    Li, Xue; Pang, Xiuyu; Zhang, Qiao; Qu, Qiannuo; Hou, Zhigang; Liu, Zhipeng; Lv, Lin; Na, Guanqiong; Zhang, Wei; Sun, Changhao; Li, Ying

    2016-01-01

    Abstract This prospective cohort study was conducted to assess the duration of daytime napping and its effect combined with night sleep deprivation on the risk of developing high HOMA-IR (homeostasis model assessment of insulin resistance) index and disadvantageous changes in glycosylated hemoglobin (HbA1c) levels. A total of 5845 diabetes-free subjects (2736 women and 3109 men), 30 to 65 years of age, were targeted for this cohort study since 2008. Multiple adjusted Cox regression models were performed to evaluate the single and joint effects of daytime napping on the risk of an elevated HbA1c level and high HOMA-IR index. After an average of 4.5 years of follow-up, >30 minutes of daytime napping was significantly associated with an increased risk of an elevated HbA1c level (>6.5%) in men and women (all P trend < 0.05). Hazard ratios (HRs) for an HbA1c level between 5.7% and 6.4% were also significant in the entire cohort and women, but nonsignificant in men. HRs (95% confidence interval, CIs) for the high HOMA-IR index in the entire cohort, men, and women were 1.33 (1.10–1.62), 1.46 (1.08–1.98), and 1.47 (1.12–1.91), respectively. The combination of sleep deprivation with no naps or >30 minutes napping and the combination of no sleep deprivation with >30 minutes daytime napping were all associated with an HbA1c level >6.5% (HR = 2.08, 95% CI = 1.24–3.51; HR = 4.00, 95% CI = 2.03–7.90; and HR = 2.05, 95% CI = 1.29–3.27, respectively). No sleep deprivation combined with >30 minutes daytime napping correlated with a high risk of an HbA1c level between 5.7% and 6.4% and high HOMA-IR index (HR = 2.12, 95% CI = 1.48–3.02; and HR = 1.35, 95% CI = 1.10–1.65, respectively). Daytime napping >30 minutes was associated with a high risk of an elevated HbA1c level and high HOMA-IR index. No sleep deprivation combined with napping >30 minutes carries a risk of abnormal glucose metabolism. Sleep deprivation combined with

  5. Dynamic actuation of single-crystal diamond nanobeams

    SciTech Connect

    Sohn, Young-Ik; Burek, Michael J.; Lončar, Marko; Kara, Vural; Kearns, Ryan

    2015-12-14

    We show the dielectrophoretic actuation of single-crystal diamond nanomechanical devices. Gradient radio-frequency electromagnetic forces are used to achieve actuation of both cantilever and doubly clamped beam structures, with operation frequencies ranging from a few MHz to ∼50 MHz. Frequency tuning and parametric actuation are also studied.

  6. Low temperature magnetic transitions of single crystal HoBi

    SciTech Connect

    Fente, A.; Suderow, H.; Vieira, S.; Nemes, N. M.; Garcia-Hernandez, M.; Budko, Sergei L.; Canfield, Paul C.

    2013-09-04

    We present resistivity, specific heat and magnetization measurements in high quality single crystals of HoBi, with a residual resistivity ratio of 126. We find, from the temperature and field dependence of the magnetization, an antiferromagnetic transition at 5.7 K, which evolves, under magnetic fields, into a series of up to five metamagnetic phases.

  7. Photoinduced polarization properties of LilO(3) single crystal.

    PubMed

    Pillai, P K; Shriver, E L

    1975-12-01

    Photoinduced polarization is achieved in a lithium iodate single crystal by the simultaneous application of a dc field and illumination from a uv source. The dark depolarization and photodepolarization current decay characteristics of the polarized samples have been studied in detail in this paper.

  8. Nucleation kinetics of urea succinic acid -ferroelectric single crystal

    NASA Astrophysics Data System (ADS)

    Dhivya, R.; Vizhi, R. Ezhil; Babu, D. Rajan

    2015-06-01

    Single crystals of Urea Succinic Acid (USA) were grown by slow cooling technique. The crystalline system was confirmed by powder X-ray diffraction. The metastable zonewidth were carried out for various temperatures i.e., 35°, 40°, 45° and 50°C. The induction period is experimentally determined and various nucleation parameters have been estimated.

  9. Transverse Mode Multi-Resonant Single Crystal Transducer

    NASA Technical Reports Server (NTRS)

    Snook, Kevin A. (Inventor); Liang, Yu (Inventor); Luo, Jun (Inventor); Hackenberger, Wesley S. (Inventor); Sahul, Raffi (Inventor)

    2015-01-01

    A transducer is disclosed that includes a multiply resonant composite, the composite having a resonator bar of a piezoelectric single crystal configured in a d(sub 32) transverse length-extensional resonance mode having a crystallographic orientation set such that the thickness axis is in the (110) family and resonance direction is the (001) family.

  10. Large diameter germanium single crystals for infrared optics.

    NASA Astrophysics Data System (ADS)

    Gafni, G.; Azoulay, M.; Shiloh, C.; Noter, Y.; Saya, A.; Galron, H.; Roth, M.

    1989-09-01

    Large single crystals, up to 200 mm in diameter, of high optical quality germanium have been grown by the Czochralski technique. Postgrowth thermal treatment improves the optical homogeneity and reduces optical losses, as shown by measurements of refractive index gradients and modulation transfer function (MTF). A new approach for the piecewise combination of interferograms, as well as a polychromatic treatment of MTF, is presented.

  11. TOPICAL REVIEW: Organic field-effect transistors using single crystals

    NASA Astrophysics Data System (ADS)

    Hasegawa, Tatsuo; Takeya, Jun

    2009-04-01

    Organic field-effect transistors using small-molecule organic single crystals are developed to investigate fundamental aspects of organic thin-film transistors that have been widely studied for possible future markets for 'plastic electronics'. In reviewing the physics and chemistry of single-crystal organic field-effect transistors (SC-OFETs), the nature of intrinsic charge dynamics is elucidated for the carriers induced at the single crystal surfaces of molecular semiconductors. Materials for SC-OFETs are first reviewed with descriptions of the fabrication methods and the field-effect characteristics. In particular, a benchmark carrier mobility of 20-40 cm2 Vs-1, achieved with thin platelets of rubrene single crystals, demonstrates the significance of the SC-OFETs and clarifies material limitations for organic devices. In the latter part of this review, we discuss the physics of microscopic charge transport by using SC-OFETs at metal/semiconductor contacts and along semiconductor/insulator interfaces. Most importantly, Hall effect and electron spin resonance (ESR) measurements reveal that interface charge transport in molecular semiconductors is properly described in terms of band transport and localization by charge traps.

  12. Reliability analysis of single crystal NiAl turbine blades

    NASA Technical Reports Server (NTRS)

    Salem, Jonathan; Noebe, Ronald; Wheeler, Donald R.; Holland, Fred; Palko, Joseph; Duffy, Stephen; Wright, P. Kennard

    1995-01-01

    As part of a co-operative agreement with General Electric Aircraft Engines (GEAE), NASA LeRC is modifying and validating the Ceramic Analysis and Reliability Evaluation of Structures algorithm for use in design of components made of high strength NiAl based intermetallic materials. NiAl single crystal alloys are being actively investigated by GEAE as a replacement for Ni-based single crystal superalloys for use in high pressure turbine blades and vanes. The driving force for this research lies in the numerous property advantages offered by NiAl alloys over their superalloy counterparts. These include a reduction of density by as much as a third without significantly sacrificing strength, higher melting point, greater thermal conductivity, better oxidation resistance, and a better response to thermal barrier coatings. The current drawback to high strength NiAl single crystals is their limited ductility. Consequently, significant efforts including the work agreement with GEAE are underway to develop testing and design methodologies for these materials. The approach to validation and component analysis involves the following steps: determination of the statistical nature and source of fracture in a high strength, NiAl single crystal turbine blade material; measurement of the failure strength envelope of the material; coding of statistically based reliability models; verification of the code and model; and modeling of turbine blades and vanes for rig testing.

  13. A Study of Single Crystal Fatigue Failure Criteria

    NASA Technical Reports Server (NTRS)

    Sayyah, Tarek; Swanson, Gregory R.; Schonberg, William P.

    2000-01-01

    This paper presents the results of a study whose objective was to study the applicability of different failure equations in modeling low cycle fatigue (LCF) test data for single crystal test specimens. A total of four failure criteria were considered in this study. One of the failure equations was developed by Pratt & Whitney and is based on normal and shear strains on the primary crystallographic slip planes of the single crystal material. Other failure equations considered are based on isotropic criteria. Because these failure equations were originally developed for isotropic materials such as structural steel, they were modified to be applicable to the single crystal slip systems of the LCF specimen material. By observing how closely the various equations were able to reduce the scatter in the LCF test data, the applicability of those equations in modeling the LCF test data was assessed. It is desired to subsequently use the failure equation with the highest correlation in the development of a new single crystal failure criterion for the Alternative Turbopump Development (ATD) for the space shuttle main engine (SSME) High Pressure Fuel Turbopump (HPFTP).

  14. Area detectors in single-crystal neutron diffraction

    NASA Astrophysics Data System (ADS)

    McIntyre, Garry J.

    2015-12-01

    The introduction of area detectors has brought about a gentle revolution in the routine application of single-crystal neutron diffractometry. Implemented first for macromolecular crystallography, electronic detectors subsequently gradually spread to chemical and physics-oriented crystallography at steady-state sources. The volumetric surveying of reciprocal space implicit in the Laue technique has required area detectors right from the start, whether using film and more recently image plates and CCD-based detectors at reactors, or scintillation detectors at spallation sources. Wide-angle volumetric data collection has extended application of neutron single-crystal diffractometry to chemical structures, sample volumes, and physical phenomena previously deemed impossible. More than 30 of the dedicated single-crystal neutron diffractometers at steady-state reactor and neutron spallation sources worldwide and accessible via peer-review proposal mechanisms are currently equipped with area detectors. Here we review the historical development of the various types of area detectors used for single crystals, discuss experimental aspects peculiar to experiments with such detectors, highlight the scientific fields where the use of area detectors has had a special impact, and forecast future developments in hardware, implementation, and software.

  15. Low-cost single-crystal turbine blades, volume 1

    NASA Technical Reports Server (NTRS)

    Strangman, T. E.; Heath, B.; Fujii, M.

    1983-01-01

    The exothermic casting process was successfully developed into a low cost nonproprietary method for producing single crystal (SC) castings. Casting yields were lower than expected, on the order of 20 percent, but it is felt that the casting yield could be significantly improved with minor modifications to the process. Single crystal Mar-M 247 and two derivative SC alloys were developed. NASAIR 100 and SC Alloy 3 were fully characterized through mechanical property testing. SC Mar-M 247 shows no significant improvement in strength over directionally solidified (DS) Mar-M 247, but the derivative alloys, NASAIR 100 and Alloy 3, show significant tensile and fatigue improvements. The 1000 hr/238 MPa (20 ksi) stress rupture capability compared to DS Mar-M 247 was improved over 28 C. Firtree testing, holography, and strain gauge rig testing were used to evaluate the effects of the anisotropic characteristics of single crystal materials. In general, the single crystal material behaved similarly to DS Mar-M 247. Two complete engine sets of SC HP turbine blades were cast using the exothermic casting process and fully machined.

  16. Some Debye temperatures from single-crystal elastic constant data

    USGS Publications Warehouse

    Robie, R.A.; Edwards, J.L.

    1966-01-01

    The mean velocity of sound has been calculated for 14 crystalline solids by using the best recent values of their single-crystal elastic stiffness constants. These mean sound velocities have been used to obtain the elastic Debye temperatures ??De for these materials. Models of the three wave velocity surfaces for calcite are illustrated. ?? 1966 The American Institute of Physics.

  17. Rice ( Oryza) hemoglobins

    PubMed Central

    Arredondo-Peter, Raúl; Moran, Jose F.; Sarath, Gautam

    2014-01-01

    Hemoglobins (Hbs) corresponding to non-symbiotic (nsHb) and truncated (tHb) Hbs have been identified in rice ( Oryza). This review discusses the major findings from the current studies on rice Hbs. At the molecular level, a family of the nshb genes, consisting of hb1, hb2, hb3, hb4 and hb5, and a single copy of the thb gene exist in Oryza sativa var. indica and O. sativa var. japonica, Hb transcripts coexist in rice organs and Hb polypeptides exist in rice embryonic and vegetative organs and in the cytoplasm of differentiating cells. At the structural level, the crystal structure of rice Hb1 has been elucidated, and the structures of the other rice Hbs have been modeled. Kinetic analysis indicated that rice Hb1 and 2, and possibly rice Hb3 and 4, exhibit a very high affinity for O 2, whereas rice Hb5 and tHb possibly exhibit a low to moderate affinity for O 2. Based on the accumulated information on the properties of rice Hbs and data from the analysis of other plant and non-plant Hbs, it is likely that Hbs play a variety of roles in rice organs, including O 2-transport, O 2-sensing, NO-scavenging and redox-signaling. From an evolutionary perspective, an outline for the evolution of rice Hbs is available. Rice nshb and thb genes vertically evolved through different lineages, rice nsHbs evolved into clade I and clade II lineages and rice nshbs and thbs evolved under the effect of neutral selection. This review also reveals lacunae in our ability to completely understand rice Hbs. Primary lacunae are the absence of experimental information about the precise functions of rice Hbs, the properties of modeled rice Hbs and the cis-elements and trans-acting factors that regulate the expression of rice hb genes, and the partial understanding of the evolution of rice Hbs. PMID:25653837

  18. Rice ( Oryza) hemoglobins.

    PubMed

    Arredondo-Peter, Raúl; Moran, Jose F; Sarath, Gautam

    2014-01-01

    Hemoglobins (Hbs) corresponding to non-symbiotic (nsHb) and truncated (tHb) Hbs have been identified in rice ( Oryza). This review discusses the major findings from the current studies on rice Hbs. At the molecular level, a family of the nshb genes, consisting of hb1, hb2, hb3, hb4 and hb5, and a single copy of the thb gene exist in Oryza sativa var. indica and O. sativa var. japonica, Hb transcripts coexist in rice organs and Hb polypeptides exist in rice embryonic and vegetative organs and in the cytoplasm of differentiating cells. At the structural level, the crystal structure of rice Hb1 has been elucidated, and the structures of the other rice Hbs have been modeled. Kinetic analysis indicated that rice Hb1 and 2, and possibly rice Hb3 and 4, exhibit a very high affinity for O 2, whereas rice Hb5 and tHb possibly exhibit a low to moderate affinity for O 2. Based on the accumulated information on the properties of rice Hbs and data from the analysis of other plant and non-plant Hbs, it is likely that Hbs play a variety of roles in rice organs, including O 2-transport, O 2-sensing, NO-scavenging and redox-signaling. From an evolutionary perspective, an outline for the evolution of rice Hbs is available. Rice nshb and thb genes vertically evolved through different lineages, rice nsHbs evolved into clade I and clade II lineages and rice nshbs and thbs evolved under the effect of neutral selection. This review also reveals lacunae in our ability to completely understand rice Hbs. Primary lacunae are the absence of experimental information about the precise functions of rice Hbs, the properties of modeled rice Hbs and the cis-elements and trans-acting factors that regulate the expression of rice hb genes, and the partial understanding of the evolution of rice Hbs.

  19. Growth, characterization, and crystal structure of a new chalcone derivative single crystal

    NASA Astrophysics Data System (ADS)

    Shettigar, Venkataraya; Dharmaprakash, S. M.

    2006-09-01

    A new organic nonlinear optical (NLO) chalcone derivative viz.1- ( 4- methoxyphenyl )-3- (3,4 - dimethoxy phenyl ) - 2 - propene-1-one, has been synthesized by Claisen-Schmidt condensation method. The synthesized compound was purified by repeated recrystallization process. To confirm the identity of the synthesized compound, FTIR spectra was recorded and various functional groups present were identified. NMR spectra were recorded for structural identity and purity confirmation of the synthesized compound. Good quality single crystals were grown by solvent evaporation and slow cooling technique using acetone as solvent. The grown crystals were characterized by UV-Visible , differential thermal analysis and linear refractive index measurement. The hardness of the crystal was determined using Vicker's indentation method. The single crystal structure analysis of the crystal was performed and it is found that the crystal belongs to monoclinic system with space group P2 I. The powder second harmonic generation(SHG)frequency conversion efficiency of the crystal was determined using Nd: YAG laser(λ = 1064nm)and it is 15 times that of Urea.

  20. Spatially resolved micro-photoluminescence imaging of porphyrin single crystals

    NASA Astrophysics Data System (ADS)

    Marin, Dawn M.; Castaneda, Jose; Kaushal, Meesha; Kaouk, Ghallia; Jones, Daniel S.; Walter, Michael G.

    2016-08-01

    We describe the collection of both time-resolved and steady-state micro-photoluminescence data from solution-grown single crystals of 5,15-bis(4-carbomethoxyphenyl)porphyrin (BCM2PP). Linking molecular orientation and structure with excited-state dynamics is crucial for engineering efficient organic solar cells, light-emitting diodes, and related molecular electronics. Photoluminescence features of single porphyrin crystals were imaged using a laser scanning confocal microscope equipped with time-correlated single photon counting (TCSPC). We show enhanced exciton lifetimes (τs1 = 2.6 ns) and stronger steady-state emission in crystalline BCM2PP samples relative to semicrystalline thin films (τs1 = 1.8 ns).

  1. Microwave Induced Direct Bonding of Single Crystal Silicon Wafers

    NASA Technical Reports Server (NTRS)

    Budraa, N. K.; Jackson, H. W.; Barmatz, M.

    1999-01-01

    We have heated polished doped single-crystal silicon wafers in a single mode microwave cavity to temperatures where surface to surface bonding occurred. The absorption of microwaves and heating of the wafers is attributed to the inclusion of n-type or p-type impurities into these substrates. A cylindrical cavity TM (sub 010) standing wave mode was used to irradiate samples of various geometry's at positions of high magnetic field. This process was conducted in vacuum to exclude plasma effects. This initial study suggests that the inclusion of impurities in single crystal silicon significantly improved its microwave absorption (loss factor) to a point where heating silicon wafers directly can be accomplished in minimal time. Bonding of these substrates, however, occurs only at points of intimate surface to surface contact. The inclusion of a thin metallic layer on the surfaces enhances the bonding process.

  2. Differences between individual ZSM-5 crystals in forming hollow single crystals and mesopores during base leaching.

    PubMed

    Fodor, Daniel; Krumeich, Frank; Hauert, Roland; van Bokhoven, Jeroen A

    2015-04-13

    After base treatment of ZSM-5 crystals below 100 nm in size, TEM shows hollow single crystals with a 10 nm shell. SEM images confirm that the shell is well- preserved even after prolonged treatment. Determination of the Si/Al ratios with AAS and XPS in combination with argon sputtering reveals aluminum zoning of the parent zeolite, and the total pore volume increases in the first two hours of base treatment. In corresponding TEM images, the amount of hollow crystals are observed to increase during the first two hours of base treatment, and intact crystals are visible even after 10 h of leaching; these observations indicate different dissolution rates between individual crystals. TEM of large, commercially available ZSM-5 crystals shows inhomogeneous distribution of mesopores among different crystals, which points to the existence of structural differences between individual crystals. Only tetrahedrally coordinated aluminum is detected with (27) Al MAS NMR after the base leaching of nano-sized ZSM-5.

  3. Subsurface Stress Fields In Single Crystal (Anisotropic) Contacts

    NASA Technical Reports Server (NTRS)

    Arakere, Nagaraj K.; Knudsen, Erik C.; Duke, Greg; Battista, Gilda; Swanson, Greg

    2004-01-01

    Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and alternating stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent HCF failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and noncrystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. This paper presents analytical and numerical techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts. The subsurface stress results are required for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades. An analytical procedure is , presented, for evaluating the subsurface stresses in the elastic half-space, using a complex potential method outlined by Lekhnitskii. Numerical results are presented for cylindrical and spherical anisotropic contacts, using finite element analysis. Effects of crystal orientation on stress response and fatigue life are examined.

  4. Structural examination of iridium-based single-crystal preparations

    NASA Astrophysics Data System (ADS)

    Axler, K. M.; Roof, R. B.

    A high-temperature crystal growth experiment produced discrete single-crystal products of AlIr and IrSi. The preparation and examination of these phases is described within. This project is part of a materials compatibility study relating to radioisotopic heat sources. These heat sources are comprised of a PuO2 fuel pellet encapsulated in an Ir alloy containment shell. Th is introduced as an additive within the Ir to maintain ductility. Si and P are picked up inadvertently in the fuel processing. The compatibility of the heat sources with Al is of interest because of potential interactions with Al alloy hardware associated with the heat source environment.

  5. Thermal expansion behavior of single-crystal zirconia

    SciTech Connect

    Adams, J.W.; Ingel, R.P.; Nakamura, H.H.; Rice, R.W.

    1985-09-01

    Thermal expansion was measured for skull-melt-grown undoped single-crystal zirconia as well as for crystals containing 2.8 wt% MgO, 4 wt% CaO, and 3 to 20 wt% Y/sub 2/O/sub 3/. Samples were cycled in air from room temperature to 1500/sup 0/C. The partially stabilized samples experienced a phase transformation which was strongly dependent on the composition and phase structures present; fully stabilized materials exhibited uniform behavior throughout the heating/cooling cycle.

  6. Subsurface Stress Fields in FCC Single Crystal Anisotropic Contacts

    NASA Technical Reports Server (NTRS)

    Arakere, Nagaraj K.; Knudsen, Erik; Swanson, Gregory R.; Duke, Gregory; Ham-Battista, Gilda

    2004-01-01

    Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and alternating stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent high cycle fatigue (HCF) failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and non-crystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. This paper presents analytical and numerical techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts. The subsurface stress results are required for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades. An analytical procedure is presented for evaluating the subsurface stresses in the elastic half-space, based on the adaptation of a stress function method outlined by Lekhnitskii. Numerical results are presented for cylindrical and spherical anisotropic contacts, using finite element analysis (FEA). Effects of crystal orientation on stress response and fatigue life are examined. Obtaining accurate subsurface stress results for anisotropic single crystal contact problems require extremely refined three-dimensional (3-D) finite element grids, especially in the edge of contact region. Obtaining resolved shear stresses (RSS) on the principal slip planes also involves

  7. Fatigue behavior of a single-crystal superalloy

    NASA Technical Reports Server (NTRS)

    Kalluri, Sreeramesh; Mcgaw, Michael A.

    1989-01-01

    A single-crystal superalloy, PWA 1480 is under consideration as a replacement material for the turbine blades of the high pressure fuel turbopump (HPFTP) of the space shuttle main engine (SSME). Three separate experimental programs were conducted to characterize the fatigue behavior of this alloy. Fatigue tests were conducted at room temperature (in air) and at 1000 F (in vacuum) on smooth specimens machined from both cast bars and slabs. The data from all of these programs are consolidated to provide a broader characterization of the fatigue behavior of the single crystal PWA 1480. The zero-mean-stress fatigue relationships are expressed in terms of stress range versus cyclic life lines on log-log plots. Characterization of the fatigue behavior of (001) oriented PWA 1480 single crystal under conditions of tensile mean stress was performed by using the unified approach proposed by Heidmann. In this approach the fatigue life is modified by a mean stress parameter so that a single life relationship can be used to represent both zero and tensile mean stress data.

  8. Membrane protein structures without crystals, by single particle electron cryomicroscopy

    PubMed Central

    Vinothkumar, Kutti R

    2015-01-01

    It is an exciting period in membrane protein structural biology with a number of medically important protein structures determined at a rapid pace. However, two major hurdles still remain in the structural biology of membrane proteins. One is the inability to obtain large amounts of protein for crystallization and the other is the failure to get well-diffracting crystals. With single particle electron cryomicroscopy, both these problems can be overcome and high-resolution structures of membrane proteins and other labile protein complexes can be obtained with very little protein and without the need for crystals. In this review, I highlight recent advances in electron microscopy, detectors and software, which have allowed determination of medium to high-resolution structures of membrane proteins and complexes that have been difficult to study by other structural biological techniques. PMID:26435463

  9. Apparatus for single ice crystal growth from the melt.

    PubMed

    Zepeda, Salvador; Nakatsubo, Shunichi; Furukawa, Yoshinori

    2009-11-01

    A crystal growth apparatus was designed and built to study the effect of growth modifiers, antifreeze proteins and antifreeze glycoproteins (AFGPs), on ice crystal growth kinetics and morphology. We used a capillary growth technique to obtain a single ice crystal with well-defined crystallographic orientation grown in AFGP solution. The basal plane was readily observed by rotation of the capillary. The main growth chamber is approximately a 0.8 ml cylindrical volume. A triple window arrangement was used to minimize temperature gradients and allow for up to 10 mm working distance objective lens. Temperature could be established to within +/-10 mK in as little as 3.5 min and controlled to within +/-2 mK after 15 min for at least 10 h. The small volume growth chamber and fast equilibration times were necessary for parabolic flight microgravity experiments. The apparatus was designed for use with inverted and side mount configurations.

  10. Dislocations and Grain Boundaries in Semiconducting Rubrene Single-Crystals

    SciTech Connect

    Chapman,B.; Checco, A.; Pindak, R.; Siegrist, T.; Kloc, C.

    2006-01-01

    Assessing the fundamental limits of the charge carrier mobilities in organic semiconductors is important for the development of organic electronics. Although devices such as organic field effect transistors (OFETs), organic thin film transistors (OTFTs) and organic light emitting diodes (OLEDs) are already used in commercial applications, a complete understanding of the ultimate limitations of performance and stability in these devices is still lacking at this time. Crucial to the determination of electronic properties in organic semiconductors is the ability to grow ultra-pure, fully ordered molecular crystals for measurements of intrinsic charge transport. Likewise, sensitive tools are needed to evaluate crystalline quality. We present a high-resolution X-ray diffraction and X-ray topography analysis of single-crystals of rubrene that are of the quality being reported to show mobilities as high as amorphous silicon. We show that dislocations and grain boundaries, which may limit charge transfer, are prominent in these crystals.

  11. Research on VCSEL of single-mode multilayer photonic crystal

    NASA Astrophysics Data System (ADS)

    Li, Wenchao; Liu, Zhengjun; Sha, Xiaopeng

    2010-10-01

    Vertical-Cavity Surface-Emitting Lasers (VCSEL) of single mode have the potential advantage in the domains of optical information network, routing interactions, optical information storage and data transmission for their excellent performance. However, operating on the single-mode model in the whole pumped area is not solved, which impacts the technologies and applications. In this paper, a new research on VCSEL of single mode multilayer photonic crystal is presented. In the structure of photonic crystal, defects in the horizontal direction are provided by the micro-cavity, while the AIR-KTP interface on the top and the KTP-DBR (Distributed Bragg Reflection) interface at the bottom of cavity provide the defects in the vertical direction, which form quantum defects of electron-hole pairs. The PC-VCSEL in the paper has excellent mode-selection characteristics, which can operate continuously at 850nm in single mode. The single-mode suppression ratio (SMSR) of 45dB is obtained in a wide dynamic range. The PC-VCSEL is expected to become a high-power single-mode light in the future.

  12. Crystal growth and characterization of CuI single crystals by solvent evaporation technique

    SciTech Connect

    Gu, Mu; Gao, Pan; Liu, Xiao-Lin; Huang, Shi-Ming; Liu, Bo; Ni, Chen; Xu, Rong-Kun; Ning, Jia-min

    2010-05-15

    Cuprous iodide (CuI) crystals are grown by slow evaporation technique in three different solvents. Large CuI single crystals with dimensions of 7.5 mm x 5 mm x 3 mm are obtained in pure acetonitrile solvent at 40 {sup o}C. The as-grown crystals are analyzed by X-ray diffraction, energy-dispersive X-ray analysis, differential scanning calorimetry, current-voltage characteristic and photoluminescence spectrum. The results show that the CuI crystal has the zinc-blende structure with no secondary phase. The elemental Cu/I ratio is 1.09:1. The melting point of the crystal is 875 K and two phase transitions occur from room temperature to its melting point. The electrical conductivity of CuI platelet crystal is in the range of 1.11-2.38 {Omega}{sup -1} cm{sup -1}. Under ultraviolet excitation, the CuI crystals exhibit three emission bands with peak positions at 426, 529 and 671 nm. The nature of the luminescence is discussed.

  13. Flux free growth of superconducting FeSe single crystals

    NASA Astrophysics Data System (ADS)

    Maheshwari, P. K.; Joshi, L. M.; Gahtori, Bhasker; Srivastava, A. K.; Gupta, Anurag; Patnaik, S. P.; Awana, V. P. S.

    2016-07-01

    We report flux free growth of superconducting FeSe single crystals by an easy and versatile high temperature melt and slow cooling method for first time. The room temperature x-ray diffraction (XRD) on the surface of the piece of such obtained crystals showed single [101] plane of β-FeSe tetragonal phase. The bulk powder XRD, being obtained by crushing the part of crystal chunk showed majority (∼87%) β-FeSe tetragonal (space group P4/nmm) and minority (∼13%) δ-FeSe hexagonal (space group P63/mmc) crystalline phases. Detailed high resolution transmission electron microscope images along with selected area electron diffraction showed the abundance of both majority β-FeSe and minority δ-FeSe phases. Both transport (ρ-T) and magnetization exhibited superconductivity at below around 10 K. Interestingly, the magnetization signal of these crystals is dominated by the magnetism of minority δ-FeSe magnetic phase, and hence the isothermal magnetization at 4 K was seen to be ferromagnetic like. Transport (ρ-T) measurements under magnetic field showed superconductivity onset at below 12 K, and ρ = 0 (T c) at 9 K. Superconducting transition temperature (T c) decreases with applied field to around 6 K at 7 T, with dT c/dH of ∼0.4 K T‑1, giving rise to an H c2(0) value of around 50 , 30 and 20 T for normal resistivity ρ n = 90%, 50% and 10% respectively, which are calculated from conventional one band Werthamer–Helfand–Hohenberg equation. FeSe single crystal activation energy is calculated from thermally activated flux flow model which is found to decreases with field from 12.1 meV for 0.2 T to 3.77 meV for 7 T.

  14. Synthesis of mesoporous zeolite single crystals with cheap porogens

    SciTech Connect

    Tao Haixiang; Li Changlin; Ren Jiawen; Wang Yanqin; Lu Guanzhong

    2011-07-15

    Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals have been successfully synthesized by adding soluble starch or sodium carboxymethyl cellulose (CMC) to a conventional zeolite synthesis system. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption analysis, {sup 27}Al magic angle spinning nuclear magnetic resonance ({sup 27}Al MAS NMR), temperature-programmed desorption of ammonia (NH{sub 3}-TPD) and ultraviolet-visible spectroscopy (UV-vis). The SEM images clearly show that all zeolite crystals possess the similar morphology with particle size of about 300 nm, the TEM images reveal that irregular intracrystal pores are randomly distributed in the whole crystal. {sup 27}Al MAS NMR spectra indicate that nearly all of the Al atoms are in tetrahedral co-ordination in ZSM-5, UV-vis spectra confirm that nearly all of titanium atoms are incorporated into the framework of TS-1. The catalytic activity of meso-ZSM-5 in acetalization of cyclohexanone and meso-TS-1 in hydroxylation of phenol was also studied. The synthesis method reported in this paper is cost-effective and environmental friendly, can be easily expended to prepare other hierarchical structured zeolites. - Graphical abstract: Mesoporous zeolite single crystals were synthesized by using cheap porogens as template. Highlights: > Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals were synthesized. > Soluble starch or sodium carboxymethyl cellulose (CMC) was used as porogens. > The mesoporous zeolites had connected mesopores although closed pores existed. > Higher catalytic activities were obtained.

  15. Plastic strain arrangement in copper single crystals in sliding

    SciTech Connect

    Chumaevskii, Andrey V. Lychagin, Dmitry V.; Tarasov, Sergei Yu.

    2014-11-14

    Deformation of tribologically loaded contact zone is one of the wear mechanisms in spite of the fact that no mass loss may occur during this process. Generation of optimal crystallographic orientations of the grains in a polycrystalline materials (texturing) may cause hardening and reducing the deformation wear. To reveal the orientation dependence of an individual gain and simplify the task we use copper single crystals with the orientations of the compression axis along [111] and [110]. The plastic deformation was investigated by means of optical, scanning electron microscopy and EBSD techniques. It was established that at least four different zones were generated in the course of sliding test, such as non-deformed base metal, plastic deformation layer sliding, crystalline lattice reorientation layer and subsurface grain structure layer. The maximum plastic strain penetration depth was observed on [110]-single crystals. The minimum stability of [111]-crystals with respect to rotation deformation mode as well as activation of shear in the sliding contact plane provide for rotation deformation localization below the worn surface. The high-rate accumulation of misorientations and less strain penetration depth was observed on [111]-crystals as compared to those of [110]-oriented ones.

  16. Stoichiometry issues in single-crystal lithium tantalate

    NASA Astrophysics Data System (ADS)

    Bordui, P. F.; Norwood, R. G.; Bird, C. D.; Carella, J. T.

    1995-10-01

    Stoichiometry issues in lithium tantalate were studied through Czochralski growth of single crystals and vapor transport equilibration (VTE) of crystalline samples to specified Li/Ta compositions. Crystals were characterized through measurement of the ferroelectric Curie temperature Tc. The VTE experiments indicated a linear variation of Tc with Li/Ta ratio across the investigated range of 47.5-49.5 mol % Li2O. By control of initial melt stoichiometry, crystals representing melt fractions ≳90% were grown having compositional uniformity within ±0.015 mol % Li2O. Growth of the compositionally uniform crystals was determined to take place through incongruent solidification, with lithium rejection from the growth interface compensating for lithium volatilization from the melt surface. With the growth process applied, a melt composition of 48.39 mol % Li2O yielded grown crystals of a uniform 47.85 mol % Li2O solid composition. The lithium tantalate congruent composition was determined to lie at a value less than or equal to 47.70 mol % Li2O.

  17. Frictional properties of single crystals HMX, RDX and PETN explosives.

    PubMed

    Wu, Y Q; Huang, F L

    2010-11-15

    The frictional properties of single crystals of cyclotetramethylene tetranitramine (HMX), cyclotrimethylene trinitramine (RDX) and pentaerythritol tetranitrate (PETN) secondary explosives are examined using a sensitive friction machine. The explosive crystals used for the measurements are at least 3.5 mm wide. The friction coefficients between crystals of the same explosive (i.e., HMX on HMX, etc.), crystals of different explosives (i.e., HMX on RDX, etc.), and each explosive and a well-polished gauge steel surface are determined. The frictional surfaces are also studied under an environmental scanning electron microscope (ESEM) to analyze surface microstructural changes under increasing loading forces. The friction coefficients vary considerably with increasing normal loading forces and are particularly sensitive to slider shapes, crystal roughness and the mechanical properties of both the slider and the sample. With increasing loading forces, most friction experiments show surface damage, consisting of grooves, debris, and nano-particles, on both the slider and sample. In some cases, a strong evidence of a localized molten state is found in the central region of the friction track. Possible mechanisms that affect the friction coefficient are discussed based on microscopic observations.

  18. Effect of Crystal Orientation on Fatigue Failure of Single Crystal Nickel Base Turbine Blade Superalloys

    NASA Technical Reports Server (NTRS)

    Arakere, Nagaraj K.; Swanson, Gregory R.

    2000-01-01

    High Cycle Fatigue (HCF) induced failures in aircraft gas-turbine engines is a pervasive problem affecting a wide range of components and materials. HCF is currently the primary cause of component failures in gas turbine aircraft engines. Turbine blades in high performance aircraft and rocket engines are increasingly being made of single crystal nickel superalloys. Single-crystal Nickel-base superalloys were developed to provide superior creep, stress rupture, melt resistance and thermomechanical fatigue capabilities over polycrystalline alloys previously used in the production of turbine blades and vanes. Currently the most widely used single crystal turbine blade superalloys are PWA 1480/1493 and PWA 1484. These alloys play an important role in commercial, military and space propulsion systems. PWA1493, identical to PWA1480, but with tighter chemical constituent control, is used in the NASA SSME (Space Shuttle Main Engine) alternate turbopump, a liquid hydrogen fueled rocket engine. Objectives for this paper are motivated by the need for developing failure criteria and fatigue life evaluation procedures for high temperature single crystal components, using available fatigue data and finite element modeling of turbine blades. Using the FE (finite element) stress analysis results and the fatigue life relations developed, the effect of variation of primary and secondary crystal orientations on life is determined, at critical blade locations. The most advantageous crystal orientation for a given blade design is determined. Results presented demonstrates that control of secondary and primary crystallographic orientation has the potential to optimize blade design by increasing its resistance to fatigue crack growth without adding additional weight or cost.

  19. Synthesis and characterization of single-crystal strontium hexaboride nanowires.

    PubMed

    Jash, Panchatapa; Nicholls, Alan W; Ruoff, Rodney S; Trenary, Michael

    2008-11-01

    Catalyst-assisted growth of single-crystal strontium hexaboride (SrB6) nanowires was achieved by pyrolysis of diborane (B2H6) over SrO powders at 760-800 degrees C and 400 mTorr in a quartz tube furnace. Raman spectra demonstrate that the nanowires are SrB6, and transmission electron microscopy along with selected area diffraction indicate that the nanowires consist of single crystals with a preferred [001] growth direction. Electron energy loss data combined with the TEM images indicate that the nanowires consist of crystalline SrB 6 cores with a thin (1 to 2 nm) amorphous oxide shell. The nanowires have diameters of 10-50 nm and lengths of 1-10 microm.

  20. A piezoelectric single-crystal ultrasonic microactuator for driving optics.

    PubMed

    Guo, Mingsen; Dong, Shuxiang; Ren, Bo; Luo, Haosu

    2011-12-01

    At the millimeter scale, the motions or force out puts generated by conventional piezoelectric, magnetostrictive, photostrictive, or electromagnetic actuators are very limited. Here, we report a piezoelectric ultrasonic microactuator (size: 1.5 × 1.5 × 5 mm, weight: 0.1 g) made of PIN-PMN-PT single crystal. The actuator converts its high-frequency microscopic displacements (nanometer to micrometer scale) into a macro scopic, centimeter-scale linear movement of a slider via frictional force, resulting in a speed up to 50 mm/s and a very high unit volume direct driving force of 26 mN/mm(3) (which is ~100 times higher than a voice coil motor and ~4 times higher than a piezoceramic ultrasonic motor). This work shows the feasibility of using piezoelectric single-crystal-based ultrasonic microactuator for miniature drive of optics in next-generation mobiles and cameras.

  1. Plastic Deformation of Aluminum Single Crystals at Elevated Temperatures

    NASA Technical Reports Server (NTRS)

    Johnson, R D; Young, A P; Schwope, A D

    1956-01-01

    This report describes the results of a comprehensive study of plastic deformation of aluminum single crystals over a wide range of temperatures. The results of constant-stress creep tests have been reported for the temperature range from 400 degrees to 900 degrees F. For these tests, a new capacitance-type extensometer was designed. This unit has a range of 0.30 inch over which the sensitivity is very nearly linear and can be varied from as low a sensitivity as is desired to a maximum of 20 microinches per millivolt with good stability. Experiments were carried out to investigate the effect of small amounts of prestraining, by two different methods, on the creep and tensile properties of these aluminum single crystals. From observations it has been concluded that plastic deformation takes place predominantly by slip which is accompanied by the mechanisms of kinking and polygonization.

  2. Raman analysis of gold on WSe2 single crystal film

    NASA Astrophysics Data System (ADS)

    Mukherjee, Bablu; Leong, Wei Sun; Li, Yida; Gong, Hao; Sun, Linfeng; Shen, Ze Xiang; Simsek, Ergun; Thong, John T. L.

    2015-06-01

    Synthesis and characterization of high-quality single-crystal tungsten diselenide (WSe2) films on a highly insulating substrate is presented. We demonstrate for the first time that the presence of gold (Au) nanoparticles in the basal plane of a WSe2 film can enhance its Raman scattering intensity. The experimentally observed enhancement ratio in the Raman signal correlates well with the simulated electric field intensity using both three-dimensional electromagnetic software and theoretical calculation considering layered medium coupled-dipole approximation (LM-CDA). This work serves as a guideline for the use of Au nanoparticles on WSe2 single-crystal thin films for surface enhanced Raman scattering (SERS) applications in the future.

  3. Flextensional Single Crystal Piezoelectric Actuators for Membrane Deformable Mirrors

    NASA Technical Reports Server (NTRS)

    Jiang, Xiaoning; Sahul, Raffi; Hackenberger, Wesley S.

    2006-01-01

    Large aperture and light weight space telescopes requires adaptive optics with deformable mirrors capable of large amplitude aberration corrections at a broad temperature range for space applications including NASA missions such as SAFIR, TPF, Con-X, etc. The single crystal piezoelectric actuators produced at TRS offer large stroke, low hysteresis, and an excellent cryogenic strain response. Specifically, the recently developed low profile, low voltage flextensional single crystal piezoelectric actuators with dimensions of 18 x 5 x 1 mm showed stroke larger than 95 microns under 300 V. Furthermore, flextensional actuator retained approx. 40-50% of its room temperature strain at liquid Nitrogen environment. In this paper, ATILA FEM design of flextensional actuators, actuator fabrication, and characterization results will be presented for the future work on membrane deformable mirror.

  4. Electrons trapped in single crystals of sucrose: Induced spin densities

    SciTech Connect

    Box, H.C.; Budzinski, E.E.; Freund, H.G. )

    1990-07-01

    Electrons are trapped at intermolecular sites in single crystals of sucrose {ital X} irradiated at 4.2 K. The coupling tensors for the hyperfine couplings between the electron and surrounding protons have been deduced from electron-nuclear double resonance (ENDOR) data. Electron spin densities at nearby hydroxy protons are positive, whereas spin densities at the more remote protons of carbon-bound hydrogen atoms are negative. The origin of these negative spin densities is discussed.

  5. Electrons trapped in single crystals of sucrose: Induced spin densities

    NASA Astrophysics Data System (ADS)

    Box, Harold C.; Budzinski, Edwin E.; Freund, Harold G.

    1990-07-01

    Electrons are trapped at intermolecular sites in single crystals of sucrose X irradiated at 4.2 K. The coupling tensors for the hyperfine couplings between the electron and surrounding protons have been deduced from electron-nuclear double resonance (ENDOR) data. Electron spin densities at nearby hydroxy protons are positive, whereas spin densities at the more remote protons of carbon-bound hydrogen atoms are negative. The origin of these negative spin densities is discussed.

  6. Crystal growth, structure analysis and characterisation of 2 - (1, 3 - dioxoisoindolin - 2 - yl) acetic acid single crystal

    SciTech Connect

    Sankari, R. Siva; Perumal, Rajesh Narayana

    2014-04-24

    Single crystal of dielectric material 2 - (1, 3 - dioxoisoindolin - 2 - yl) acetic acid has been grown by slow evaporation solution growth method. The grown crystal was harvested in 25 days. The crystal structure was analyzed by Single crystal X - ray diffraction. UV-vis-NIR analysis was performed to examine the optical property of the grown crystal. The thermal property of the grown crystal was studied by thermogravimetric analysis (TGA) and differential thermal analysis (DTA). The dielectric measurements were carried out and the dielectric constant was calculated and plotted at all frequencies.

  7. Diamond turning of Si and Ge single crystals

    SciTech Connect

    Blake, P.; Scattergood, R.O.

    1988-12-01

    Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

  8. Method for thermal processing alumina-enriched spinel single crystals

    DOEpatents

    Jantzen, C.M.

    1995-05-09

    A process for age-hardening alumina-rich magnesium aluminum spinel to obtain the desired combination of characteristics of hardness, clarity, flexural strength and toughness comprises selection of the time-temperature pair for isothermal heating followed by quenching. The time-temperature pair is selected from the region wherein the precipitate groups have the characteristics sought. The single crystal spinel is isothermally heated and will, if heated long enough pass from its single phase through two pre-precipitates and two metastable precipitates to a stable secondary phase precipitate within the spinel matrix. Quenching is done slowly at first to avoid thermal shock, then rapidly. 12 figs.

  9. Method for thermal processing alumina-enriched spinel single crystals

    DOEpatents

    Jantzen, Carol M.

    1995-01-01

    A process for age-hardening alumina-rich magnesium aluminum spinel to obtain the desired combination of characteristics of hardness, clarity, flexural strength and toughness comprises selection of the time-temperature pair for isothermal heating followed by quenching. The time-temperature pair is selected from the region wherein the precipitate groups have the characteristics sought. The single crystal spinel is isothermally heated and will, if heated long enough pass from its single phase through two pre-precipitates and two metastable precipitates to a stable secondary phase precipitate within the spinel matrix. Quenching is done slowly at first to avoid thermal shock, then rapidly.

  10. Subsurface Stress Fields in Single Crystal (Anisotropic) Contacts

    NASA Technical Reports Server (NTRS)

    Arakere, Nagaraj K.

    2003-01-01

    Single crystal superalloy turbine blades used in high pressure turbomachinery are subject to conditions of high temperature, triaxial steady and fatigue stresses, fretting stresses in the blade attachment and damper contact locations, and exposure to high-pressure hydrogen. The blades are also subjected to extreme variations in temperature during start-up and shutdown transients. The most prevalent HCF failure modes observed in these blades during operation include crystallographic crack initiation/propagation on octahedral planes, and noncrystallographic initiation with crystallographic growth. Numerous cases of crack initiation and crack propagation at the blade leading edge tip, blade attachment regions, and damper contact locations have been documented. Understanding crack initiation/propagation under mixed-mode loading conditions is critical for establishing a systematic procedure for evaluating HCF life of single crystal turbine blades. Techniques for evaluating two and three dimensional subsurface stress fields in anisotropic contacts are presented in this report. Figure 1 shows typical damper contact locations in a turbine blade. The subsurface stress results are used for evaluating contact fatigue life at damper contacts and dovetail attachment regions in single crystal nickel-base superalloy turbine blades.

  11. Single crystal plasticity by modeling dislocation density rate behavior

    SciTech Connect

    Hansen, Benjamin L; Bronkhorst, Curt; Beyerlein, Irene; Cerreta, E. K.; Dennis-Koller, Darcie

    2010-12-23

    The goal of this work is to formulate a constitutive model for the deformation of metals over a wide range of strain rates. Damage and failure of materials frequently occurs at a variety of deformation rates within the same sample. The present state of the art in single crystal constitutive models relies on thermally-activated models which are believed to become less reliable for problems exceeding strain rates of 10{sup 4} s{sup -1}. This talk presents work in which we extend the applicability of the single crystal model to the strain rate region where dislocation drag is believed to dominate. The elastic model includes effects from volumetric change and pressure sensitive moduli. The plastic model transitions from the low-rate thermally-activated regime to the high-rate drag dominated regime. The direct use of dislocation density as a state parameter gives a measurable physical mechanism to strain hardening. Dislocation densities are separated according to type and given a systematic set of interactions rates adaptable by type. The form of the constitutive model is motivated by previously published dislocation dynamics work which articulated important behaviors unique to high-rate response in fcc systems. The proposed material model incorporates thermal coupling. The hardening model tracks the varying dislocation population with respect to each slip plane and computes the slip resistance based on those values. Comparisons can be made between the responses of single crystals and polycrystals at a variety of strain rates. The material model is fit to copper.

  12. Chiral multichromic single crystals for optical devices (LDRD 99406).

    SciTech Connect

    Kemp, Richard Alan; Felix, Ana M. (University of New Mexico, Albuquerque, NM)

    2006-12-01

    This report summarizes our findings during the study of a novel system that yields multi-colored materials as products. This system is quite unusual as it leads to multi-chromic behavior in single crystals, where one would expect that only a single color would exist. We have speculated that these novel solids might play a role in materials applications such as non-linear optics, liquid crystal displays, piezoelectric devices, and other similar applications. The system examined consisted of a main-group alkyl compound (a p block element such as gallium or aluminum) complexed with various organic di-imines. The di-imines had substituents of two types--either alkyl or aromatic groups attached to the nitrogen atoms. We observed that single crystals, characterized by X-ray crystallography, were obtained in most cases. Our research during January-July, 2006, was geared towards understanding the factors leading to the multi-chromic nature of the complexes. The main possibilities put forth initially considered (a) the chiral nature of the main group metal, (b) possible reduction of the metal to a lower-valent, radical state, (c) the nature of the ligand(s) attached to the main group metal, and (d) possible degradation products of the ligand leading to highly-colored products. The work carried out indicates that the most likely explanation considered involves degradation of the aromatic ligands (a combination of (c) and (d)), as the experiments performed can clearly rule out (a) and (b).

  13. Interfacial dislocation motion and interactions in single-crystal superalloys

    SciTech Connect

    Liu, B.; Raabe, D.; Roters, F.; Arsenlis, A.

    2014-10-01

    The early stage of high-temperature low-stress creep in single-crystal superalloys is characterized by the rapid development of interfacial dislocation networks. Although interfacial motion and dynamic recovery of these dislocation networks have long been expected to control the subsequent creep behavior, direct observation and hence in-depth understanding of such processes has not been achieved. Incorporating recent developments of discrete dislocation dynamics models, we simulate interfacial dislocation motion in the channel structures of single-crystal superalloys, and investigate how interfacial dislocation motion and dynamic recovery are affected by interfacial dislocation interactions and lattice misfit. Different types of dislocation interactions are considered: self, collinear, coplanar, Lomer junction, glissile junction, and Hirth junction. The simulation results show that strong dynamic recovery occurs due to the short-range reactions of collinear annihilation and Lomer junction formation. The misfit stress is found to induce and accelerate dynamic recovery of interfacial dislocation networks involving self-interaction and Hirth junction formation, but slow down the steady interfacial motion of coplanar and glissile junction forming dislocation networks. The insights gained from these simulations on high-temperature low-stress creep of single-crystal superalloys are also discussed.

  14. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION

    SciTech Connect

    A. Wang; G. Pickrell; R. May

    2002-09-10

    In this research program, several optical instruments for high temperature measurement based on single crystal sapphire material are introduced and tested for real-time, reliable, long-term monitoring of temperatures for coal gasifier. These are sapphire fiber extrinsic Fabry-Perot interferometric (EFPI) sensor; intensity-measurement based polarimetric sapphire sensor and broadband polarimetric differential interferometric (BPDI) sapphire sensor. Based on current evaluation and analysis of the experimental results, the broadband polarimetric differential interferometric (BPDI) sensor system was chosen for further prototype instrumentation development. This approach is based on the self-calibrating measurement of optical path differences (OPD) in a single-crystal sapphire disk, which is a function of both the temperature dependent birefringence and the temperature dependent dimensional changes. The BPDI sensor system extracts absolute temperature information by absolute measurement of phase delays. By encoding temperature information in optical spectrum instead of optical intensity, this sensor guarantees its relative immunity to optical source power fluctuations and fiber losses, thus providing a high degree of long-term measurement stability which is highly desired in industrial applications. The entire prototype for BPDI system including the single crystal sapphire probe, zirconia prism, alumina extension tube, optical components and signal processing hardware and software have shown excellent performance in the laboratory experiments shown in this report.

  15. Performance of Large grain and Single Crystal Niobium Cavities

    SciTech Connect

    Kneisel, Peter; Ciovati, Gianluigi; Sekutowicz, Jacek

    2006-07-01

    We have fabricated and tested several single and one multi-cell cavity made from large grain niobium of four different ingots. Two cavities at a frequency of ~ 2.2 GHz were made from single crystal sheets. Large grain material was used for four single cell cavities of the HG â and OC shapes, a 7-cell cavity of the HG â shape â all resonating at 1500 MHz â and an ILC_LL single cell cavity at 1300 MHz. We began to explore also different chemical polishing baths such as a 1:1:1 and a 1:1:2 buffered solution and explored the change of cavity performance as a function of material removal. The results from these preliminary investigations are reported in this contribution.

  16. Internal stresses and dislocation structure of large single crystals of germanium for IR optics

    NASA Astrophysics Data System (ADS)

    Kaplunov, I. A.

    2006-02-01

    The thermoelastic stresses that appear during crystallization have been theoretically estimated for single crystals of germanium grown in the shape of a disk. It is shown that there is a correlation between the stress distribution and the dislocation structure of large single crystals of germanium obtained by the Stepanov method and by directed crystallization.

  17. Acquisition of Single Crystal Growth and Characterization Equipment

    SciTech Connect

    Maple, M. Brian; Zocco, Diego A.

    2008-12-09

    Final Report for DOE Grant No. DE-FG02-04ER46178 'Acquisition of Single Crystal Growth and Characterization Equipment'. There is growing concern in the condensed matter community that the need for quality crystal growth and materials preparation laboratories is not being met in the United States. It has been suggested that there are too many researchers performing measurements on too few materials. As a result, many user facilities are not being used optimally. The number of proficient crystal growers is too small. In addition, insufficient attention is being paid to the enterprise of finding new and interesting materials, which is the driving force behind much of condensed matter research and, ultimately, technology. While a detailed assessment of this situation is clearly needed, enough evidence of a problem already exists to compel a general consensus that the situation must be addressed promptly. This final report describes the work carried out during the last four years in our group, in which a state-of-the-art single crystal growth and characterization facility was established for the study of novel oxides and intermetallic compounds of rare earth, actinide and transition metal elements. Research emphasis is on the physics of superconducting (SC), magnetic, heavy fermion (HF), non-Fermi liquid (NFL) and other types of strongly correlated electron phenomena in bulk single crystals. Properties of these materials are being studied as a function of concentration of chemical constituents, temperature, pressure, and magnetic field, which provide information about the electronic, lattice, and magnetic excitations at the root of various strongly correlated electron phenomena. Most importantly, the facility makes possible the investigation of material properties that can only be achieved in high quality bulk single crystals, including magnetic and transport phenomena, studies of the effects of disorder, properties in the clean limit, and spectroscopic and scattering

  18. Optical spectroscopy of single crystals and nanoscale films of pentacene

    NASA Astrophysics Data System (ADS)

    He, Rui

    Growing interest in organic molecular semiconductors is stimulated by their promising applications in flexible devices. Transistors based on pentacene have reached device mobilities comparable to amorphous Si. This creates incentives for fundamental studies of organic molecular crystals and nanoscale structures. The research presented in this dissertation demonstrates optical spectroscopy venues for studies of organic molecular semiconductors. Pentacene single crystals and nanoscale films, reaching sub-monolayer thickness, are probed by photoluminescence and resonance Raman spectroscopies. The studies of single crystals reveal new physics linked to intrinsic and extrinsic excitations and provide benchmarks for evaluating the results in nanoscale films. By studying single crystals with different degrees of purities, I identified extrinsic luminescence bands in high quality crystals. Large resonance enhancements of Raman intensities occur when photon energies overlap intrinsic luminescence bands of free and self-trapped excitons. A four-step Raman scattering mechanism is proposed to describe the resonance processes with the self-trapped state. Photoluminescence spectra of discontinuous clusters and ultra-thin films with few monolayers in thickness reveal two fundamental excitations that are assigned to Davydov doublets of the lowest singlet exciton. The observations suggest that pentacene nanoscale films develop a structure with two molecules per unit cell. Pentacene monolayers deposited on substrates functionalized with the polymer of poly alpha-methylstyrene exhibit great lateral uniformity. These monolayers display sharp and intense free exciton luminescence bands which offer giant resonance enhancements of Raman scattering intensities. The enhancements enable the first observations of low-lying lattice modes from pentacene monolayers. The lattice modes show characteristic changes when the number of layers is increased. The low-lying lattice modes reveal inter

  19. Influence of solvents on the habit modification of alpha lactose monohydrate single crystals

    NASA Astrophysics Data System (ADS)

    Parimaladevi, P.; Srinivasan, K.

    2013-02-01

    Restricted evaporation of solvent method was adopted for the growth of alpha lactose monohydrate single crystals from different solvents. The crystal habits of grown crystals were analysed. The form of crystallization was confirmed by powder x-ray diffraction analysis. Thermal behaviour of the grown crystals was studied by using differential scanning calorimetry.

  20. Design and analysis of large-core single-mode windmill single crystal sapphire optical fiber

    NASA Astrophysics Data System (ADS)

    Cheng, Yujie; Hill, Cary; Liu, Bo; Yu, Zhihao; Xuan, Haifeng; Homa, Daniel; Wang, Anbo; Pickrell, Gary

    2016-06-01

    We present a large-core single-mode "windmill" single crystal sapphire optical fiber (SCSF) design, which exhibits single-mode operation by stripping off the higher-order modes (HOMs) while maintaining the fundamental mode. The "windmill" SCSF design was analyzed using the finite element analysis method, in which all the HOMs are leaky. The numerical simulation results show single-mode operation in the spectral range from 0.4 to 2 μm in the windmill SCSF, with an effective core diameter as large as 14 μm. Such fiber is expected to improve the performance of many of the current sapphire fiber optic sensor structures.

  1. Naturally crystalline hemoglobin of the nematode Mermis nigrescens. An in situ microspectrophotometric study of chemical properties and dichroism.

    PubMed Central

    Burr, A H; Harosi, F I

    1985-01-01

    A dichroic microspectrophotometer was used to measure isotropic and dichroic absorbance spectra of this unique cytoplasmic hemoglobin and its derivatives. A perfusion slide enabled changing the media bathing the Mermis head. The native spectrum, which has an exceptionally low alpha-band extinction, was shown to be entirely due to oxyhemoglobin. The CO-hemoglobin spectrum is more typical, however, the alpha- and beta-bands are unusually closely spaced. A ferric hemochrome was formed on oxidation with ferricyanide or hydroxylamine and was readily converted to ferric hemoglobin cyanide on adding cyanide. Aquoferric hemoglobin and ferric hemoglobin fluoride were not easily formed. Deoxyhemoglobin, identified by its typical absorption spectrum, was formed only under the extremely low O2 pressures attainable in the presence of dithionite. A glucose oxidase, catalase solution deoxygenated hemoglobin in human erythrocytes but not in adjacent Mermis preparations. The affinity for O2 is much greater than for CO. Also, spectral evidence points to an oxyheme environment that is different than in vertebrate hemoglobin and myoglobin. The polarization ratio (PR) magnitude and the PR spectrum were unaffected by perfusion with high refractive index solvents; therefore, form dichroism due to the rodlike crystals is negligible. Maximum extinction is approximately perpendicular to the long axis of the microscopic crystals, which are oriented parallel to the body axis within the hypodermal cells. The PR spectra of the hemoglobin derivatives strongly resemble the corresponding spectra previously reported of single crystals made of horse hemoglobin, whale myoglobin, or Aplysia myoglobin and change appropriately when the ligand is changed. This confirms that the intracellular crystals of Mermis are of oxyhemoglobin. PMID:3986282

  2. Standard Reference Material (SRM 1990) For Single Crystal Diffractometer Alignment

    PubMed Central

    Wong-Ng, W.; Siegrist, T.; DeTitta, G. T.; Finger, L. W.; Evans, H. T.; Gabe, E. J.; Enright, G. D.; Armstrong, J. T.; Levenson, M.; Cook, L. P.; Hubbard, C. R.

    2001-01-01

    An international project was successfully completed which involved two major undertakings: (1) a round-robin to demonstrate the viability of the selected standard and (2) the certification of the lattice parameters of the SRM 1990, a Standard Reference Material® for single crystal diffractometer alignment. This SRM is a set of ≈3500 units of Cr-doped Al2O3, or ruby spheres [(0.420.011 mole fraction % Cr (expanded uncertainty)]. The round-robin consisted of determination of lattice parameters of a pair of crystals: the ruby sphere as a standard, and a zeolite reference to serve as an unknown. Fifty pairs of crystals were dispatched from Hauptman-Woodward Medical Research Institute to volunteers in x-ray laboratories world-wide. A total of 45 sets of data was received from 32 laboratories. The mean unit cell parameters of the ruby spheres was found to be a=4.7608 ű0.0062 Å, and c=12.9979 ű0.020 Å (95 % intervals of the laboratory means). The source of errors of outlier data was identified. The SRM project involved the certification of lattice parameters using four well-aligned single crystal diffractometers at (Bell Laboratories) Lucent Technologies and at NRC of Canada (39 ruby spheres), the quantification of the Cr content using a combined microprobe and SEM/EDS technique, and the evaluation of the mosaicity of the ruby spheres using a double-crystal spectrometry method. A confirmation of the lattice parameters was also conducted using a Guinier-Hägg camera. Systematic corrections of thermal expansion and refraction corrections were applied. These rubies– are rhombohedral, with space group R3¯c. The certified mean unit cell parameters are a=4.76080±0.00029 Å, and c=12.99568 ű0.00087 Å (expanded uncertainty). These certified lattice parameters fall well within the results of those obtained from the international round-robin study. The Guinier-Hägg transmission measurements on five samples of powdered rubies (a=4.7610 ű0.0013 Å, and c = 12

  3. Standard Reference Material (SRM 1990) For Single Crystal Diffractometer Alignment.

    PubMed

    Wong-Ng, W; Siegrist, T; DeTitta, G T; Finger, L W; Evans, H T; Gabe, E J; Enright, G D; Armstrong, J T; Levenson, M; Cook, L P; Hubbard, C R

    2001-01-01

    An international project was successfully completed which involved two major undertakings: (1) a round-robin to demonstrate the viability of the selected standard and (2) the certification of the lattice parameters of the SRM 1990, a Standard Reference Material(®) for single crystal diffractometer alignment. This SRM is a set of ≈3500 units of Cr-doped Al2O3, or ruby spheres [(0.420.011 mole fraction % Cr (expanded uncertainty)]. The round-robin consisted of determination of lattice parameters of a pair of crystals: the ruby sphere as a standard, and a zeolite reference to serve as an unknown. Fifty pairs of crystals were dispatched from Hauptman-Woodward Medical Research Institute to volunteers in x-ray laboratories world-wide. A total of 45 sets of data was received from 32 laboratories. The mean unit cell parameters of the ruby spheres was found to be a=4.7608 ű0.0062 Å, and c=12.9979 ű0.020 Å (95 % intervals of the laboratory means). The source of errors of outlier data was identified. The SRM project involved the certification of lattice parameters using four well-aligned single crystal diffractometers at (Bell Laboratories) Lucent Technologies and at NRC of Canada (39 ruby spheres), the quantification of the Cr content using a combined microprobe and SEM/EDS technique, and the evaluation of the mosaicity of the ruby spheres using a double-crystal spectrometry method. A confirmation of the lattice parameters was also conducted using a Guinier-Hägg camera. Systematic corrections of thermal expansion and refraction corrections were applied. These rubies- are rhombohedral, with space group [Formula: see text]. The certified mean unit cell parameters are a=4.76080±0.00029 Å, and c=12.99568 ű0.00087 Å (expanded uncertainty). These certified lattice parameters fall well within the results of those obtained from the international round-robin study. The Guinier-Hägg transmission measurements on five samples of powdered rubies (a=4.7610 ű0.0013

  4. Standard Reference Material (SRM 1990) For Single Crystal Diffractometer Alignment.

    PubMed

    Wong-Ng, W; Siegrist, T; DeTitta, G T; Finger, L W; Evans, H T; Gabe, E J; Enright, G D; Armstrong, J T; Levenson, M; Cook, L P; Hubbard, C R

    2001-01-01

    An international project was successfully completed which involved two major undertakings: (1) a round-robin to demonstrate the viability of the selected standard and (2) the certification of the lattice parameters of the SRM 1990, a Standard Reference Material(®) for single crystal diffractometer alignment. This SRM is a set of ≈3500 units of Cr-doped Al2O3, or ruby spheres [(0.420.011 mole fraction % Cr (expanded uncertainty)]. The round-robin consisted of determination of lattice parameters of a pair of crystals: the ruby sphere as a standard, and a zeolite reference to serve as an unknown. Fifty pairs of crystals were dispatched from Hauptman-Woodward Medical Research Institute to volunteers in x-ray laboratories world-wide. A total of 45 sets of data was received from 32 laboratories. The mean unit cell parameters of the ruby spheres was found to be a=4.7608 ű0.0062 Å, and c=12.9979 ű0.020 Å (95 % intervals of the laboratory means). The source of errors of outlier data was identified. The SRM project involved the certification of lattice parameters using four well-aligned single crystal diffractometers at (Bell Laboratories) Lucent Technologies and at NRC of Canada (39 ruby spheres), the quantification of the Cr content using a combined microprobe and SEM/EDS technique, and the evaluation of the mosaicity of the ruby spheres using a double-crystal spectrometry method. A confirmation of the lattice parameters was also conducted using a Guinier-Hägg camera. Systematic corrections of thermal expansion and refraction corrections were applied. These rubies- are rhombohedral, with space group [Formula: see text]. The certified mean unit cell parameters are a=4.76080±0.00029 Å, and c=12.99568 ű0.00087 Å (expanded uncertainty). These certified lattice parameters fall well within the results of those obtained from the international round-robin study. The Guinier-Hägg transmission measurements on five samples of powdered rubies (a=4.7610 ű0.0013

  5. Standard Reference Material (SRM 1990) for Single Crystal Diffractometer Alignment

    USGS Publications Warehouse

    Wong-Ng, W.; Siegrist, T.; DeTitta, G.T.; Finger, L.W.; Evans, H.T.; Gabe, E.J.; Enright, G.D.; Armstrong, J.T.; Levenson, M.; Cook, L.P.; Hubbard, C.R.

    2001-01-01

    An international project was successfully completed which involved two major undertakings: (1) a round-robin to demonstrate the viability of the selected standard and (2) the certification of the lattice parameters of the SRM 1990, a Standard Reference Material?? for single crystal diffractometer alignment. This SRM is a set of ???3500 units of Cr-doped Al2O3, or ruby spheres [(0 420.011 mole fraction % Cr (expanded uncertainty)]. The round-robin consisted of determination of lattice parameters of a pair of crystals' the ruby sphere as a standard, and a zeolite reference to serve as an unknown. Fifty pairs of crystals were dispatched from Hauptman-Woodward Medical Research Institute to volunteers in x-ray laboratories world-wide. A total of 45 sets of data was received from 32 laboratories. The mean unit cell parameters of the ruby spheres was found to be a=4.7608 A?? ?? 0.0062 A??, and c=12.9979 A?? ?? 0.020 A?? (95 % intervals of the laboratory means). The source of errors of outlier data was identified. The SRM project involved the certification of lattice parameters using four well-aligned single crystal diffractometers at (Bell Laboratories) Lucent Technologies and at NRC of Canada (39 ruby spheres), the quantification of the Cr content using a combined microprobe and SEM/EDS technique, and the evaluation of the mosaicity of the ruby spheres using a double-crystal spectrometry method. A confirmation of the lattice parameters was also conducted using a Guinier-Ha??gg camera. Systematic corrections of thermal expansion and refraction corrections were applied. These rubies_ are rhombohedral, with space group R3c. The certified mean unit cell parameters are a=4.76080 ?? 0.00029 A??, and c=12 99568 A?? ?? 0.00087 A?? (expanded uncertainty). These certified lattice parameters fall well within the results of those obtained from the international round-robin study. The Guinier-Ha??gg transmission measurements on five samples of powdered rubies (a=4.7610 A?? ?? 0

  6. Physics of Heavily Implanted Single Crystal Complex Oxides

    NASA Astrophysics Data System (ADS)

    Ofan, Avishai

    Ion implantation is known to result in a significant amount of damage in solid single crystals. In this work a battery of material probes is used to study the effect of a very high-dose He implantation in ferroelectric lithium niobate (LiNbO3) and the implantation-induced formation of defects. In addition, the evolution of these defects with post-implantation annealing is examined. After irradiation, a high concentration of defects is found to collect and create a network of thick prismatic planar defects having typical dimensions of ˜1.5 microm and 200 nm parallel and perpendicular to the Z axis, respectively. Optical microscopy shows that there is strong temperature dependence for forming the network; the density of these defects reaches a maximum value for an annealing temperature of 250 °C. However, annealing to temperatures above 380 °C fully eliminates the defects. High-resolution TEM studies indicate that the defects are likely localized twinning and dislocation pileups due to plastic deformation of the lattice to relieve He-implantation-induced stress. During this deformation He accumulates at the twin boundaries. A second type of implantation induced defects is studied using room temperature, high- resolution electron microscopy; this study shows that implanted He in LiNbO3 nucleates and accumulates as bubbles. These He inclusions are at ˜20 GPa pressure and most probably in the solid phase. In addition, the energetically favored shape of the inclusions in their as-implanted form is spherical and not oblate; this spherical shape is due to the fact their diameter is below a critical radius for balancing the surface and elastics energies as predicted by elastic theory. When annealed, the characteristic length scale of the He inclusions increases, forming faceted bubbles. Annealing also causes the He inclusions to migrate and accumulate into strings due to the preferred {1014}-pyramidal-twinning planes. The ion implantation-induced defects are found to be

  7. Single-Photon Source for Quantum Information Based on Single Dye Molecule Fluorescence in Liquid Crystal Host

    SciTech Connect

    Lukishova, S.G.; Knox, R.P.; Freivald, P.; McNamara, A.; Boyd, R.W.; Stroud, Jr., C.R.; Schmid, A.W.; Marshall, K.L.

    2006-08-18

    This paper describes a new application for liquid crystals: quantum information technology. A deterministically polarized single-photon source that efficiently produces photons exhibiting antibunching is a pivotal hardware element in absolutely secure quantum communication. Planar-aligned nematic liquid crystal hosts deterministically align the single dye molecules which produce deterministically polarized single (antibunched) photons. In addition, 1-D photonic bandgap cholesteric liquid crystals will increase single-photon source efficiency. The experiments and challenges in the observation of deterministically polarized fluorescence from single dye molecules in planar-aligned glassy nematic-liquid-crystal oligomer as well as photon antibunching in glassy cholesteric oligomer are described for the first time.

  8. Large pyramid shaped single crystals of BiFeO{sub 3} by solvothermal synthesis method

    SciTech Connect

    Sornadurai, D.; Ravindran, T. R.; Paul, V. Thomas; Sastry, V. Sankara

    2012-06-05

    Synthesis parameters are optimized in order to grow single crystals of multiferroic BiFeO{sub 3}. 2 to 3 mm size pyramid (tetrahedron) shaped single crystals were successfully obtained by solvothermal method. Scanning electron microscopy with EDAX confirmed the phase formation. Raman scattering spectra of bulk BiFeO3 single crystals have been measured which match well with reported spectra.

  9. ESR Study on Irradiated Ascorbic Acid Single Crystal

    NASA Astrophysics Data System (ADS)

    Tuner, H.; Korkmaz, M.

    2007-04-01

    Food irradiation is a ``cold'' process for preserving food and has been established as a safe and effective method of food processing and preservation after more than five decades of research and development. The small temperature increase, absence of residue and effectiveness of treatment of pre-packed food are the main advantages. In food industry, ascorbic acid and its derivatives are frequently used as antioxidant agents. However, irradiation is expected to produces changes in the molecules of food components and of course in the molecules of the agents added as preservation agents such as ascorbic acid. These changes in the molecular structures could cause decreases in the antioxidant actions of these agents. Therefore, the radiation resistance of these agents must be known to determine the amount of radiation dose to be delivered. Electron spin resonance (ESR) is one of the leading methods for identification of intermediates produced after irradiation. ESR spectrum of irradiated solid powder of ascorbic acid is fairly complex and determinations of involved radical species are difficult. In the present work, single crystals of ascorbic acid irradiated by gamma radiation are used to determine molecular structures of radiation induced radicalic species and four radicalic species related in pair with P21 crystal symmetry are found to be responsible from experimental ESR spectrum of gamma irradiated single crystal of ascorbic acid.

  10. Structural peculiarities of single crystal diamond needles of nanometer thickness

    NASA Astrophysics Data System (ADS)

    Orekhov, Andrey S.; Tuyakova, Feruza T.; Obraztsova, Ekaterina A.; Loginov, Artem B.; Chuvilin, Andrey L.; Obraztsov, Alexander N.

    2016-11-01

    Diamond is attractive for various applications due to its unique mechanical and optical properties. In particular, single crystal diamond needles with high aspect ratios and sharp apexes of nanometer size are demanded for different types of optical sensors including optically sensing tip probes for scanning microscopy. This paper reports on electron microscopy and Raman spectroscopy characterization of the diamond needles having geometrically perfect pyramidal shapes with rectangular atomically flat bases with (001) crystallography orientation, 2–200 nm sharp apexes, and with lengths from about 10–160 μm. The needles were produced by selective oxidation of (001) textured polycrystalline diamond films grown by chemical vapor deposition. Here we study the types and distribution of defects inside and on the surface of the single crystal diamond needles. We show that sp3 type point defects are incorporated into the volume of the diamond crystal during growth, while the surface of the lateral facets is enriched by multiple extended defects. Nitrogen addition to the reaction mixture results in increase of the growth rate on {001} facets correlated with the rise in the concentration of sp3 type defects.

  11. Strain incompatibility and residual strains in ferroelectric single crystals

    PubMed Central

    Pramanick, A.; Jones, J. L.; Tutuncu, G.; Ghosh, D.; Stoica, A. D.; An, K.

    2012-01-01

    Residual strains in ferroelectrics are known to adversely affect the material properties by aggravating crack growth and fatigue degradation. The primary cause for residual strains is strain incompatibility between different microstructural entities. For example, it was shown in polycrystalline ferroelectrics that residual strains are caused due to incompatibility between the electric-field-induced strains in grains with different crystallographic orientations. However, similar characterization of cause-effect in multidomain ferroelectric single crystals is lacking. In this article, we report on the development of plastic residual strains in [111]-oriented domain engineered BaTiO3 single crystals. These internal strains are created due to strain incompatibility across 90° domain walls between the differently oriented domains. The average residual strains over a large crystal volume measured by in situ neutron diffraction is comparable to previous X-ray measurements of localized strains near domain boundaries, but are an order of magnitude lower than electric-field-induced residual strains in polycrystalline ferroelectrics. PMID:23226595

  12. ESR Study on Irradiated Ascorbic Acid Single Crystal

    SciTech Connect

    Tuner, H.; Korkmaz, M.

    2007-04-23

    Food irradiation is a 'cold' process for preserving food and has been established as a safe and effective method of food processing and preservation after more than five decades of research and development. The small temperature increase, absence of residue and effectiveness of treatment of pre-packed food are the main advantages. In food industry, ascorbic acid and its derivatives are frequently used as antioxidant agents. However, irradiation is expected to produces changes in the molecules of food components and of course in the molecules of the agents added as preservation agents such as ascorbic acid. These changes in the molecular structures could cause decreases in the antioxidant actions of these agents. Therefore, the radiation resistance of these agents must be known to determine the amount of radiation dose to be delivered. Electron spin resonance (ESR) is one of the leading methods for identification of intermediates produced after irradiation. ESR spectrum of irradiated solid powder of ascorbic acid is fairly complex and determinations of involved radical species are difficult. In the present work, single crystals of ascorbic acid irradiated by gamma radiation are used to determine molecular structures of radiation induced radicalic species and four radicalic species related in pair with P21 crystal symmetry are found to be responsible from experimental ESR spectrum of gamma irradiated single crystal of ascorbic acid.

  13. Strength anomaly in B2 FeAl single crystals

    SciTech Connect

    Yoshimi, K.; Hanada, S.; Yoo, M.H.; Matsumoto, N.

    1994-12-31

    Strength and deformation microstructure of B2 Fe-39 and 48%Al single crystals (composition given in atomic percent), which were fully annealed to remove frozen-in vacancies, have been investigated at temperatures between room temperature and 1073K. The hardness of as-homogenized Fe-48Al is higher than that of as-homogenized Fe-39Al while after additional annealing at 698K the hardness of Fe-48Al becomes lower than that of Fe-39Al. Fe-39Al single crystals slowly cooled after homogenizing at a high temperature were deformed in compression as a function of temperature and crystal orientation. A peak of yield strength appears around 0.5T{sub m} (T{sub m} = melting temperature). The orientation dependence of the critical resolved shear stress does not obey Schmid`s law even at room temperature and is quite different from that of b.c.c. metals and B2 intermetallics at low temperatures. At the peak temperature slip transition from <111>-type to <001>-type is found to occur macroscopically and microscopically, while it is observed in TEM that some of the [111] dislocations decompose into [101] and [010] on the (1096I) plane below the peak temperature. The physical sources for the positive temperature dependence of yield stress of B2 FeAl are discussed based on the obtained results.

  14. Growth of high quality bulk size single crystals of inverted solubility lithium sulphate monohydrate

    NASA Astrophysics Data System (ADS)

    Silambarasan, A.; Rajesh, P.; Ramasamy, P.

    2015-06-01

    The paper summarizes the processes of growing large lithium sulfate monohydrate (LSMH) single crystals. We have established a procedure to grow high quality bulk size single crystals of inverted solubility LSMH by a newly developed unidirectional crystallization technique called the Sankeranarayenan - Ramasamy (SR) method. The convective flow of crystal growth processes from solution and the conditions of growing crystals of various aspects were discussed. Good quality LSMH single crystal is grown of the size 20 mmX80 mm without cracks, localized-defects and inclusions. The as-grown crystals are suitable for piezoelectric and nonlinear optical applications.

  15. Growth of high quality bulk size single crystals of inverted solubility lithium sulphate monohydrate

    SciTech Connect

    Silambarasan, A.; Rajesh, P. Ramasamy, P.

    2015-06-24

    The paper summarizes the processes of growing large lithium sulfate monohydrate (LSMH) single crystals. We have established a procedure to grow high quality bulk size single crystals of inverted solubility LSMH by a newly developed unidirectional crystallization technique called the Sankeranarayenan - Ramasamy (SR) method. The convective flow of crystal growth processes from solution and the conditions of growing crystals of various aspects were discussed. Good quality LSMH single crystal is grown of the size 20 mmX80 mm without cracks, localized-defects and inclusions. The as-grown crystals are suitable for piezoelectric and nonlinear optical applications.

  16. A Voltammetric Biosensor Based on Glassy Carbon Electrodes Modified with Single-Walled Carbon Nanotubes/Hemoglobin for Detection of Acrylamide in Water Extracts from Potato Crisps

    PubMed Central

    Krajewska, Agnieszka; Radecki, Jerzy; Radecka, Hanna

    2008-01-01

    The presence of toxic acrylamide in a wide range of food products such as potato crisps, French fries or bread has been confirmed by Swedish scientists from Stockholm University. The neurotoxicity, possible carcinogenicity of this compound and its metabolites compels us to control them by quantitative and qualitative assays. Acrylamide forms adduct with hemoglobin (Hb) as a result of the reaction the -NH2 group of the N-terminal valine with acrylamide. In this work we present the use of glassy carbon electrodes coated with single-walled carbon nanotubes (SWCNTs) and Hb for voltammetric detection of acrylamide in water solutions. The electrodes presented a very low detection limit (1.0×10-9 M). The validation made in the matrix obtained by water extraction of potato crisps showed that the electrodes presented are suitable for the direct determination of acrylamide in food samples.

  17. High pressure Raman spectra of monoglycine nitrate single crystal

    NASA Astrophysics Data System (ADS)

    Carvalho, J. O.; Moura, G. M.; Dos Santos, A. O.; Lima, R. J. C.; Freire, P. T. C.; Façanha Filho, P. F.

    2016-05-01

    Single crystal of monoglycine nitrate has been studied by Raman spectroscopy under high pressures up to 5.5 GPa. The results show changes in lattice modes in the pressure ranges of 1.1-1.6 GPa and 4.0-4.6 GPa. The first change occurs with appearance of bands related to the lattice modes as well as discontinuity in the slope of dΩ/dP of these modes. Moreover, bands associated with the skeleton of glycine suggest that the molecule undergoes conformational modifications. The appearance of a strong band at 55 cm- 1 point to a second phase transition associated with the lattice modes, while the internal modes remain unchanged. These anomalies are probably due to rearrangement of hydrogen bonds. Additionally, decompression to ambient pressure shows that the phase transitions are reversible. Finally, the results show that the nitrate anions play an important role on the stability of the monoglycine nitrate crystal.

  18. Atomic hydrogen doping in single-crystal vanadium dioxide

    NASA Astrophysics Data System (ADS)

    Ji, Heng; Hardy, Will; Wei, Jiang; Lin, Jian; Paik, Hanjong; Schlom, Darrell; Natelson, Douglas

    2014-03-01

    Vanadium dioxide is a strongly correlated material with a bulk metal-to-insulator transition (MIT) near 340 K. Previous experiments in single-crystal nanowires (J. Wei et al., Nature Nano. 7, 357-362 (2012)) have shown that catalytic doping with atomic hydrogen can stabilize the high temperature metallic state. In this experiment, we used a hot filament source to split hydrogen molecules and directly dope atomic hydrogen into VO2 material, including epitaxial films and nanowires, without any catalyst. From observations of the wire samples, we infer the relative diffusion rates of H in the monoclinic and rutile crystal structures. Transport measurements of the doped film samples show no temperature-driven transition, but rather a conducting state down to 2K. We present Hall and magnetoresistance measurements on macroscale and mesoscale devices fabricated from the doped films.

  19. Single-crystal Ti2AlN thin films

    NASA Astrophysics Data System (ADS)

    Joelsson, T.; Hörling, A.; Birch, J.; Hultman, L.

    2005-03-01

    We have produced pure thin-film single-crystal Ti2AlN(0001), a member of the Mn +1AXn class of materials. The method used was UHV dc reactive magnetron sputtering from a 2Ti:Al compound target in a mixed Ar -N2 discharge onto (111) oriented MgO substrates. X-ray diffraction and transmission electron microscopy were used to establish the hexagonal crystal structure with c and a lattice parameters of 13.6 and 3.07Å, respectively. The hardness H, and elastic modulus E, as determined by nanoindentation measurements, were found to be 16.1±1GPa and 270±20GPa, respectively. A room-temperature resistivity for the films of 39μΩcm was obtained.

  20. High pressure Raman spectra of monoglycine nitrate single crystal.

    PubMed

    Carvalho, J O; Moura, G M; Dos Santos, A O; Lima, R J C; Freire, P T C; Façanha Filho, P F

    2016-05-15

    Single crystal of monoglycine nitrate has been studied by Raman spectroscopy under high pressures up to 5.5 GPa. The results show changes in lattice modes in the pressure ranges of 1.1-1.6 GPa and 4.0-4.6 GPa. The first change occurs with appearance of bands related to the lattice modes as well as discontinuity in the slope of dΩ/dP of these modes. Moreover, bands associated with the skeleton of glycine suggest that the molecule undergoes conformational modifications. The appearance of a strong band at 55 cm(-1) point to a second phase transition associated with the lattice modes, while the internal modes remain unchanged. These anomalies are probably due to rearrangement of hydrogen bonds. Additionally, decompression to ambient pressure shows that the phase transitions are reversible. Finally, the results show that the nitrate anions play an important role on the stability of the monoglycine nitrate crystal. PMID:26967511

  1. Crystal oscillators using negative voltage gain, single pole response amplifiers

    NASA Technical Reports Server (NTRS)

    Kleinberg, Leonard L. (Inventor)

    1989-01-01

    A simple and inexpensive crystal oscillator is provided which employs negative voltage gain, single pole response amplifiers. The amplifiers may include such configurations as gate inverters, operational amplifiers and conventional bipolar transistor amplifiers, all of which operate at a frequency which is on the roll-off portion of their gain versus frequency curve. Several amplifier feedback circuit variations are employed to set desired bias levels and to allow the oscillator to operate at the crystal's fundamental frequency or at an overtone of the fundamental frequency. The oscillator is made less expensive than comparable oscillators by employing relatively low frequency amplifiers and operating them at roll-off, at frequencies beyond which they are customarily used. Simplicity is provided because operation at roll-off eliminates components ordinarily required in similar circuits to provide sufficient phase-shift in the feedback circuitry for oscillation to occur.

  2. Modeling the anisotropic shock response of single-crystal RDX

    NASA Astrophysics Data System (ADS)

    Luscher, Darby

    Explosives initiate under impacts whose energy, if distributed homogeneously throughout the material, translates to temperature increases that are insufficient to drive the rapid chemistry observed. Heterogeneous thermomechanical interactions at the meso-scale (i.e. between single-crystal and macroscale) leads to the formation of localized hot spots. Direct numerical simulations of mesoscale response can contribute to our understanding of hot spots if they include the relevant deformation mechanisms that are essential to the nonlinear thermomechanical response of explosive molecular crystals. We have developed a single-crystal model for the finite deformation thermomechanical response of cyclotrimethylene trinitramine (RDX). Because of the low symmetry of RDX, a complete description of nonlinear thermoelasticity requires a careful decomposition of free energy into components that represent the pressure-volume-temperature (PVT) response and the coupling between isochoric deformation and both deviatoric and hydrostatic stresses. An equation-of-state (EOS) based on Debye theory that defines the PVT response was constructed using experimental data and density functional theory calculations. This EOS replicates the equilibrium states of phase transformation from alpha to gamma polymorphs observed in static high-pressure experiments. Lattice thermoelastic parameters defining the coupled isochoric free energy were obtained from molecular dynamics calculations and previous experimental data. Anisotropic crystal plasticity is modeled using Orowan's expression relating slip rate to dislocation density and velocity. Details of the theory will be presented followed by discussion of simulations of flyer plate impact experiments, including recent experiments diagnosed with in situ X-ray diffraction at the Advanced Photon Source. Impact conditions explored within the experimental effort have spanned shock pressures ranging from 1-10 GPa for several crystallographic orientations

  3. Single Crystal Structure Determination of Alumina to 1 Mbar

    NASA Astrophysics Data System (ADS)

    Dong, H.; Zhang, L.; Prakapenka, V.; Mao, H.

    2014-12-01

    Aluminum oxide (Al2O3) is an important ceramic material and a major oxide in the earth. Additionally, alumina is a widely used pressure standard in static high-pressure experiments (Cr3+-bearing corundum, ruby). The changes of its crystal structure with pressure (P) and temperature (T) are important for its applications and understanding its physical properties in the deep Earth. There have been numerous reports on the high P-T polymorphs of alumina. Previous theoretical calculations and experiments suggest that the crystal structure of Al2O3 evolves greatly at high P-T. In this study, we used the newly developed multigrain crystallography method combined with single-crystal x-ray diffraction analysis technique for the structure determination of alumina at high P-T to provide single-crystal structure refinement for high-pressure phases of Al2O3. Alumina powder was mixed with ~10% Pt and Ne was used as both pressure transmitting media and thermal insulating layers during laser-heating. Coarse-grained aggregates of Al2O3 were synthesized in a laser-heated diamond anvil cell. The structure change of Al2O3 was monitored by in situ x-ray diffraction at ~1 Mbar and 2700 K. The results allow us to distinguish the structural differences between the Rh2O3 (II) structure (space group Pbcn) and perovskite structure (space group Pbnm) for the first high-pressure phase of Al2O3. More detailed results will be discussed in the later work.

  4. Analysis of synthetic diamond single crystals by X-ray topography and double-crystal diffractometry

    SciTech Connect

    Prokhorov, I. A.; Ralchenko, V. G.; Bolshakov, A. P.; Polskiy, A. V.; Vlasov, A. V.; Subbotin, I. A.; Podurets, K. M.; Pashaev, E. M.; Sozontov, E. A.

    2013-12-15

    Structural features of diamond single crystals synthesized under high pressure and homoepitaxial films grown by chemical vapor deposition (CVD) have been analyzed by double-crystal X-ray diffractometry and topography. The conditions of a diffraction analysis of diamond crystals using Ge monochromators have been optimized. The main structural defects (dislocations, stacking faults, growth striations, second-phase inclusions, etc.) formed during crystal growth have been revealed. The nitrogen concentration in high-pressure/high-temperature (HPHT) diamond substrates is estimated based on X-ray diffraction data. The formation of dislocation bundles at the film-substrate interface in the epitaxial structures has been revealed by plane-wave topography; these dislocations are likely due to the relaxation of elastic macroscopic stresses caused by the lattice mismatch between the substrate and film. The critical thicknesses of plastic relaxation onset in CVD diamond films are calculated. The experimental techniques for studying the real diamond structure in optimizing crystal-growth technology are proven to be highly efficient.

  5. Large-mode-area single-polarization single-mode photonic crystal fiber: design and analysis.

    PubMed

    Kumar, Ajeet; Saini, Than Singh; Naik, Kishor Dinkar; Sinha, Ravindra Kumar

    2016-07-01

    A rectangular core photonic crystal fiber structure has been presented and analyzed for single-polarization single-mode operation. Single-polarization is obtained with asymmetric design and by introducing different loss for x-polarization and y-polarization of fundamental modes. Single-polarization single-mode operation of the proposed photonic crystal fiber is investigated in detail by using a full vector finite element method with an anisotropic perfectly matched layer. The variations of the confinement loss and effective mode area of x-polarization and y-polarization of fundamental modes have been simulated by varying the structural parameters of the proposed photonic crystal fiber. At the optimized parameters, confinement loss and effective mode area is obtained as 0.94 dB/m and 60.67  μm2 for y-polarization as well as 26.67 dB/m and 67.23  μm2 for x-polarization of fundamental modes, respectively, at 1.55 μm. Therefore simulation results confirmed that, 0.75 m length of fiber will be sufficient to get a y-polarized fundamental mode with an effective mode area as large as 60.67  μm2.

  6. Shock response of He bubbles in single crystal Cu

    SciTech Connect

    Li, B.; Wang, L.; E, J. C.; Luo, S. N.; Ma, H. H.

    2014-12-07

    With large-scale molecular dynamics simulations, we investigate shock response of He nanobubbles in single crystal Cu. For sufficient bubble size or internal pressure, a prismatic dislocation loop may form around a bubble in unshocked Cu. The internal He pressure helps to stabilize the bubble against plastic deformation. However, the prismatic dislocation loops may partially heal but facilitate nucleation of new shear and prismatic dislocation loops. For strong shocks, the internal pressure also impedes internal jetting, while a bubble assists local melting; a high speed jet breaks a He bubble into pieces dispersed among Cu. Near-surface He bubbles may burst and form high velocity ejecta containing atoms and small fragments, while the ejecta velocities do not follow the three-dimensional Maxwell-Boltzmann distributions expected for thermal equilibrium. The biggest fragment size deceases with increasing shock strength. With a decrease in ligament thickness or an increase in He bubble size, the critical shock strength required for bubble bursting decreases, while the velocity range, space extension and average velocity component along the shock direction, increase. Small bubbles are more efficient in mass ejecting. Compared to voids and perfect single crystal Cu, He bubbles have pronounced effects on shock response including bubble/void collapse, Hugoniot elastic limit (HEL), deformation mechanisms, and surface jetting. HEL is the highest for perfect single crystal Cu with the same orientations, followed by He bubbles without pre-existing prismatic dislocation loops, and then voids. Complete void collapse and shear dislocations occur for embedded voids, as opposed to partial collapse, and shear and possibly prismatic dislocations for He bubbles. He bubbles lower the threshhold shock strength for ejecta formation, and increase ejecta velocity and ejected mass.

  7. Single crystal silicon capacitors with low microwave loss in the single photon regime

    NASA Astrophysics Data System (ADS)

    Weber, S. J.; Murch, K. W.; Slichter, D. H.; Vijay, R.; Siddiqi, I.

    2011-04-01

    We have fabricated superconducting microwave resonators in a lumped element geometry using single crystal silicon dielectric parallel plate capacitors with C >2 pF. Aluminum devices with resonant frequencies between 4.0 and 6.5 GHz exhibited an average internal quality factor Qi of 2×105 in the single photon excitation regime at T =20 mK. Attributing the observed loss solely to the capacitive element, our measurements place an upper bound on the loss tangent of the silicon dielectric layer of tan δi=5×10-6. This level of loss is an order of magnitude lower than is currently observed in structures incorporating amorphous dielectric materials, thus making single crystal silicon capacitors an attractive, robust route for realizing long-lived quantum circuits.

  8. Annealing of deformed olivine single-crystals under 'dry' conditions

    NASA Astrophysics Data System (ADS)

    Blaha, Stephan; Katsura, Tomoo

    2013-04-01

    Knowledge of rheological properties of Earth's materials is essential to understand geological processes. Open questions are the water content and crystallographic orientation dependences of dislocation creep rate, because the dominant slip system changes with increasing water content, which suggest different dislocations have different water content dependence. This project focuses on olivine, which is the most abundant mineral of the upper mantle. It is also considered to be the weakest phase and hence should control the rheology of the upper mantle. Several slip systems were reported for olivine, which are [100](010), [001](010), [001](100) and [100](001), each of which appear under different water content and stress conditions [1]. For this purpose we started to obtain data for 'dry' conditions, providing basic knowledge to understand the effect of water. Variation in dislocation creep rate according to change in physical conditions can be estimated by dislocation recovery experiments [2]. In this technique, deformed crystals are annealed, in which the dislocation density is expected to decrease due to coalescence of two dislocations. Dislocation densities are measured before and after the annealing. Dislocation mobility, which should be directly proportional to the dislocation creep rate, is estimated based on the change in dislocation density and duration of annealing. This technique has significant advantages partly because informations of strain rate and deviatoric stress, which are difficult to measure, are unnecessary, and partly because dislocation annealing is conducted under quasi-hydrostatic conditions, which allows wide ranges of P and T conditions. The first step of the experiments is to deform a single crystal of olivine. For this purpose, we developed an assembly, which deforms a single crystal in simple-shear geometry and prevent breakage, sub-grain formation and recrystallization of the crystal. Olivine single-crystals were placed in the high

  9. EPR studies of gamma-irradiated taurine single crystals

    NASA Astrophysics Data System (ADS)

    Bulut, A.; Karabulut, B.; Tapramaz, R.; Köksal, F.

    2000-04-01

    An EPR study of gamma-irradiated taurine [C 2H 7NO 3S] single crystal was carried out at room temperature. The EPR spectra were recorded in the three at mutually perpendicular planes. There are two magnetically distinct sites in monoclinic lattice. The principle values of g and hyperfine constants for both sites were calculated. The results have indicated the presence of 32ṠO -2 and 33ṠO -2 radicals. The hyperfine values of 33ṠO -2 radical were used to obtain O-S-O bond angle for both sites.

  10. Polarization-dependent exciton dynamics in tetracene single crystals

    SciTech Connect

    Zhang, Bo; Zhang, Chunfeng Xu, Yanqing; Wang, Rui; He, Bin; Liu, Yunlong; Zhang, Shimeng; Wang, Xiaoyong; Xiao, Min

    2014-12-28

    We conduct polarization-dependent ultrafast spectroscopy to study the dynamics of singlet fission (SF) in tetracene single crystals. The spectrotemporal species for singlet and triplet excitons in transient absorption spectra are found to be strongly dependent on probe polarization. By carefully analyzing the polarization dependence, the signals contributed by different transitions related to singlet excitons have been disentangled, which is further applied to construct the correlation between dynamics of singlet and triplet excitons. The anisotropy of exciton dynamics provides an alternative approach to tackle the long-standing challenge in understanding the mechanism of singlet fission in organic semiconductors.

  11. Fluidized-Bed Deposition Of Single-Crystal Silicon

    NASA Technical Reports Server (NTRS)

    Hsu, George C.; Rohatgi, Naresh K.

    1988-01-01

    Uniformly thin single-crystal films of silicon produced by modification of fluidized-bed-reactor technique producing polysilicon by chemical vapor deposition. Proposed for silicon wafers for flat-plate solar arrays and results in different structural and electronic properties in deposition layer desirable for specific microelectronic or solar-cell processing. In process deposition occurs on silicon wafers, kept individually at temperatures above 1,000 degree C. Heated wafers held in unheated and minimally-agitated-fluidized bed of silicon particles and in low concentration of silane.

  12. Depressurization amorphization of single-crystal boron carbide.

    PubMed

    Yan, X Q; Tang, Z; Zhang, L; Guo, J J; Jin, C Q; Zhang, Y; Goto, T; McCauley, J W; Chen, M W

    2009-02-20

    We report depressurization amorphization of single-crystal boron carbide (B4C) investigated by in situ high-pressure Raman spectroscopy. It was found that localized amorphization of B4C takes place during unloading from high pressures, and nonhydrostatic stresses play a critical role in the high-pressure phase transition. First-principles molecular dynamics simulations reveal that the depressurization amorphization results from pressure-induced irreversible bending of C-B-C atomic chains cross-linking 12 atom icosahedra at the rhombohedral vertices.

  13. The sublimation kinetics of GeSe single crystals

    NASA Technical Reports Server (NTRS)

    Irene, E. A.; Wiedemeier, H.

    1975-01-01

    The sublimation kinetics of (001) oriented GeSe single crystal platelets was studied by high-temperature mass spectroscopy, quantitative vacuum microbalance techniques, and hot stage optical microscopy. For a mean experimental temperature of 563 K, the activation enthalpy and entropy are found to equal 32.3 kcal/mole and 19.1 eu, respectively. The vaporization coefficient is less than unity for the range of test temperatures, and decreases with increasing temperature. The combined experimental data are correlated by means of a multistep surface adsorption mechanism.

  14. Growth of bulk gadolinium pyrosilicate single crystals for scintillators

    NASA Astrophysics Data System (ADS)

    Gerasymov, I.; Sidletskiy, O.; Neicheva, S.; Grinyov, B.; Baumer, V.; Galenin, E.; Katrunov, K.; Tkachenko, S.; Voloshina, O.; Zhukov, A.

    2011-03-01

    Ce, Pr, and La-doped gadolinium pyrosilicate Gd2Si2O7 (GPS) single crystals were grown by the Czochralski and Top Seeded Solution Growth (TSSG) techniques for the first time. Formation conditions of different pyrosilicate phases were determined. X-ray luminescence integral intensity of Ce-doped GPS is about one order of magnitude higher in comparison with gadolinium oxyorthosilicate Gd2SiO5:Ce (GSO:Ce). All samples demonstrate temperature stability of luminescence yield up to 400 K.

  15. Nonlinear microwave switching response of BSCCO single crystals

    SciTech Connect

    Jacobs, T.; Sridhar, S.; Willemsen, B.A. |; Li, Qiang; Gu, G.D.; Koshizuka, N.

    1996-06-01

    Measurements of the surface impedance in Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+{delta}} single crystal with microwave currents flowing along the {cflx c} axis show clear evidence of a step-like nonlinearity. The surface resistance switches between apparently quantized levels for microwave field strength changes < 1 mG. This nonlinear response can arise from the presence of intrinsic Josephson junctions along the {cflx c} axis of these samples driven by the microwave current.

  16. Single Molecule Studies on Dynamics in Liquid Crystals

    PubMed Central

    Täuber, Daniela; von Borczyskowski, Christian

    2013-01-01

    Single molecule (SM) methods are able to resolve structure related dynamics of guest molecules in liquid crystals (LC). Highly diluted small dye molecules on the one hand explore structure formation and LC dynamics, on the other hand they report about a distortion caused by the guest molecules. The anisotropic structure of LC materials is used to retrieve specific conformation related properties of larger guest molecules like conjugated polymers. This in particular sheds light on organization mechanisms within biological cells, where large molecules are found in nematic LC surroundings. This review gives a short overview related to the application of highly sensitive SM detection schemes in LC. PMID:24077123

  17. A macroscopic model for magnetic shape-memory single crystals

    NASA Astrophysics Data System (ADS)

    Bessoud, Anne-Laure; Kružík, Martin; Stefanelli, Ulisse

    2013-04-01

    A rate-independent model for the quasi-static magneto-elastic evolution of a magnetic shape-memory single crystal is presented. In particular, the purely mechanical Souza-Auricchio model for shape-memory alloys is here combined with classical micro-magnetism by suitably associating magnetization and inelastic strain. By balancing the effect of conservative and dissipative actions, a nonlinear evolution PDE system of rate-independent type is obtained. We prove the existence of so-called energetic solutions to this system. Moreover, we discuss several limits for the model corresponding to parameter asymptotics by means of a rigorous Γ-convergence argument.

  18. Rotatoelectricity in cholesteric side-chain liquid single crystal elastomers.

    PubMed

    Menzel, Andreas M; Brand, Helmut R

    2006-11-21

    We analyze the phenomenon of rotatoelectricity which is characteristic of cholesteric side-chain liquid single crystal elastomers. Using a linearized macroscopic continuum description and our previous work we show that if such a material is exposed to a static external electric field oriented parallel to the cholesteric helical axis, the director of the liquid crystalline phase will rotate around the helical axis. The material considered is assumed to be a perfect electric insulator. We propose an experiment in which the effect of rotatoelectricity should be directly observable and from which the ratio of the material parameters involved will be accessible.

  19. Lasing characteristics of Ho:YAG single crystal fiber.

    PubMed

    Li, Yuan; Miller, Keith; Johnson, Eric G; Nie, Craig D; Bera, Subhabrata; Harrington, James A; Shori, Ramesh

    2016-05-01

    Lasing was demonstrated for the first time at 2.09 μm in 0.5% Holmium (Ho) doped YAG single crystal fiber (SCF) fabricated using the Laser Heated Pedestal Growth (LHPG) method. Output power of 23.5 W with 67.5% optical-to-optical slope efficiency is, to the best of our knowledge, the highest output power achieved at 2 µm from a SCF fabricated using LHPG. With continued improvement in the quality of the SCF and better thermal management, output power of few 100s W and higher, especially in the 2 µm spectral region, is realizable in the very near future.

  20. Lasing characteristics of Ho:YAG single crystal fiber.

    PubMed

    Li, Yuan; Miller, Keith; Johnson, Eric G; Nie, Craig D; Bera, Subhabrata; Harrington, James A; Shori, Ramesh

    2016-05-01

    Lasing was demonstrated for the first time at 2.09 μm in 0.5% Holmium (Ho) doped YAG single crystal fiber (SCF) fabricated using the Laser Heated Pedestal Growth (LHPG) method. Output power of 23.5 W with 67.5% optical-to-optical slope efficiency is, to the best of our knowledge, the highest output power achieved at 2 µm from a SCF fabricated using LHPG. With continued improvement in the quality of the SCF and better thermal management, output power of few 100s W and higher, especially in the 2 µm spectral region, is realizable in the very near future. PMID:27137589

  1. Transient current electric field profiling of single crystal CVD diamond

    NASA Astrophysics Data System (ADS)

    Isberg, J.; Gabrysch, M.; Tajani, A.; Twitchen, D. J.

    2006-08-01

    The transient current technique (TCT) has been adapted for profiling of the electric field distribution in intrinsic single crystal CVD diamond. It was found that successive hole transits do not appreciably affect the electric field distribution within the sample. Transits of holes can therefore be used to probe the electric field distribution and also the distribution of trapped charge. Electron transits, on the other hand, cause an accumulation of negative charge in the sample. Illumination with blue or green light was shown to lead to accumulation of positive charge. Low concentrations of trapped charge can be detected in diamond using TCT, corresponding to an ionized impurity concentration below N = 1010 cm-3.

  2. Experiment MA-028 crystal growth. [low gravity manufacturing of single crystals from Apollo/Soyuz Test Project

    NASA Technical Reports Server (NTRS)

    Lind, D. M.

    1976-01-01

    A crystal growth experiment is reported on orbital space flights. The experiment was performed during the Apollo-Soyuz Test Project. The Crystal Growth Experiment assessed a novel process for growing single crystals of insoluble substances by allowing two or more reactant solutions to diffuse toward each other through a region of pure solvent in zero gravity. The experiment was entirely successful and yielded crystals of about the expected size, quality, and number.

  3. Capillarity creates single-crystal calcite nanowires from amorphous calcium carbonate.

    PubMed

    Kim, Yi-Yeoun; Hetherington, Nicola B J; Noel, Elizabeth H; Kröger, Roland; Charnock, John M; Christenson, Hugo K; Meldrum, Fiona C

    2011-12-23

    Single-crystal calcite nanowires are formed by crystallization of morphologically equivalent amorphous calcium carbonate (ACC) particles within the pores of track etch membranes. The polyaspartic acid stabilized ACC is drawn into the membrane pores by capillary action, and the single-crystal nature of the nanowires is attributed to the limited contact of the intramembrane ACC particle with the bulk solution. The reaction environment then supports transformation to a single-crystal product.

  4. Photoluminescence properties of MgxZn1-xSe single crystals

    NASA Astrophysics Data System (ADS)

    Park, Sang-An; Song, Ho-Jun; Kim, Wha-Tek; Kim, Hyung-Gon; Jin, Moon-Seog; Kim, Chang-Dae; Yoon, Chang-Sun

    1998-03-01

    MgxZn1-xSe single crystals were grown by the closed tube sublimation method. The MgxZn1-xSe single crystals crystallized into zincblende and wurtzite structures in the composition ranges of x=0.0-0.1 and x=0.2-0.6, respectively. Blue and violet emissions with LO phonon replica and self-activated emissions in the MgxZn1-xSe single crystals were observed at 10 K.

  5. Synthesis of mesoporous zeolite single crystals with cheap porogens

    NASA Astrophysics Data System (ADS)

    Tao, Haixiang; Li, Changlin; Ren, Jiawen; Wang, Yanqin; Lu, Guanzhong

    2011-07-01

    Mesoporous zeolite (silicalite-1, ZSM-5, TS-1) single crystals have been successfully synthesized by adding soluble starch or sodium carboxymethyl cellulose (CMC) to a conventional zeolite synthesis system. The obtained samples were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen sorption analysis, 27Al magic angle spinning nuclear magnetic resonance ( 27Al MAS NMR), temperature-programmed desorption of ammonia (NH 3-TPD) and ultraviolet-visible spectroscopy (UV-vis). The SEM images clearly show that all zeolite crystals possess the similar morphology with particle size of about 300 nm, the TEM images reveal that irregular intracrystal pores are randomly distributed in the whole crystal. 27Al MAS NMR spectra indicate that nearly all of the Al atoms are in tetrahedral co-ordination in ZSM-5, UV-vis spectra confirm that nearly all of titanium atoms are incorporated into the framework of TS-1. The catalytic activity of meso-ZSM-5 in acetalization of cyclohexanone and meso-TS-1 in hydroxylation of phenol was also studied. The synthesis method reported in this paper is cost-effective and environmental friendly, can be easily expended to prepare other hierarchical structured zeolites.

  6. Ferromagnetism in Single Crystal MoS2

    NASA Astrophysics Data System (ADS)

    Saeidi Varnoosfaderani, Sima; Tongay, Sefaattin; Appleton, Bill; Wu, Junqiao; Hebard, Arthur

    2013-03-01

    We report on the magnetic properties of MoS2 flakes measured from room temperature down to 10 K and magnetic fields up to 5 Tesla. Molybdenum disulfide (MoS2) is one of the most stable layered transition metal dichalcogenides, which has a finite band gap and is regarded as a complementary (quasi-) 2D material to graphene. We find that single crystals of MoS2 display ferromagnetism superimposed onto a large temperature-dependent diamagnetism and observe that ferromagnetism persists from 10 K up to room temperature. We attribute the existence of ferromagnetism partly to the presence of zigzag edges in the magnetic ground state at the grain boundaries. Since the magnetic measurements are relatively insensitive to the interlayer coupling, these results are expected to be also valid in the single layer limit. This work is supported by the Office of Naval Research and National Science Foundation

  7. Structural, optical, mechanical and dielectric studies of pure and doped L-Prolinium Trichloroacetate single crystals

    NASA Astrophysics Data System (ADS)

    Renuka, N.; Ramesh Babu, R.; Vijayan, N.; Vasanthakumar, Geetha; Krishna, Anuj; Ramamurthi, K.

    2015-02-01

    In the present work, pure and metal substituted L-Prolinium trichloroacetate (LPTCA) single crystals were grown by slow evaporation method. The grown crystals were subjected to single crystal X-ray diffraction (XRD), powder X-ray diffraction, FTIR, UV-Visible-NIR, hardness, photoluminescence and dielectric studies. The dopant concentration in the crystals was measured by inductively coupled plasma (ICP) analysis. Single crystal X-ray diffraction studies of the pure and metal substituted LPTCA revealed that the grown crystals belong to the trigonal system. Ni2+ and Co2+ doping slightly altered the lattice parameters of LPTCA without affecting the basic structure of the crystal. FTIR spectral analysis confirms the presence of various functional groups in the grown crystals. The mechanical behavior of pure and doped crystals was analyzed by Vickers's microhardness test. The optical transmittance, dielectric and photoluminescence properties of the pure and doped crystals were analyzed.

  8. Structural, optical, mechanical and dielectric studies of pure and doped L-Prolinium trichloroacetate single crystals.

    PubMed

    Renuka, N; Ramesh Babu, R; Vijayan, N; Vasanthakumar, Geetha; Krishna, Anuj; Ramamurthi, K

    2015-02-25

    In the present work, pure and metal substituted L-Prolinium trichloroacetate (LPTCA) single crystals were grown by slow evaporation method. The grown crystals were subjected to single crystal X-ray diffraction (XRD), powder X-ray diffraction, FTIR, UV-Visible-NIR, hardness, photoluminescence and dielectric studies. The dopant concentration in the crystals was measured by inductively coupled plasma (ICP) analysis. Single crystal X-ray diffraction studies of the pure and metal substituted LPTCA revealed that the grown crystals belong to the trigonal system. Ni(2+) and Co(2+) doping slightly altered the lattice parameters of LPTCA without affecting the basic structure of the crystal. FTIR spectral analysis confirms the presence of various functional groups in the grown crystals. The mechanical behavior of pure and doped crystals was analyzed by Vickers's microhardness test. The optical transmittance, dielectric and photoluminescence properties of the pure and doped crystals were analyzed.

  9. Controlling mechano- and seeding-triggered single-crystal-to-single-crystal phase transition: molecular domino with a disconnection of aurophilic bonds.

    PubMed

    Seki, Tomohiro; Sakurada, Kenta; Ito, Hajime

    2013-12-01

    Green and blue polymorphs: A single-crystal-to-single-crystal (SCSC) phase transition of phenyl(3,5-dimethylphenyl isocyanide)gold(I) was triggered by mechanical picking or solid seeding and propagated spontaneously with a domino-like mechanism. As a result, one phase with intense green emission was transformed to another phase with weaker blue emission.

  10. A cage-based cationic body-centered tetragonal metal-organic framework: single-crystal to single-crystal transformation and selective uptake of organic dyes.

    PubMed

    Chen, Di-ming; Shi, Wei; Cheng, Peng

    2015-01-01

    A cage-based cationic body-centered metal-organic framework was successfully synthesized using a custom-designed bifunctional triazolcarboxylate ligand. It shows interesting single-crystal-to-single-crystal transformation upon solvent exchange process and selective uptake of organic dyes.

  11. Deformation of Single Crystal Molybdenum at High Pressure

    SciTech Connect

    Bonner, B P; Aracne, C; Farber, D L; Boro, C O; Lassila, D H

    2004-02-24

    Single crystal samples of micron dimensions oriented in the [001] direction were shortened 10 to 40% in uniaxial compression with superposed hydrostatic pressure to begin investigation of how the onset of yielding evolves with pressure. A testing machine based on opposed anvil geometry with precision pneumatic control of the applied force and capability to measure sub micron displacements was developed to produce shape changing deformation at pressure. The experiments extend observations of pressure dependent deformation to {approx}5Gpa at shortening rates of {approx}2*10{sup -4}. Samples have been recovered for post run characterization and analysis to determine if deformation mechanisms are altered by pressure. Experiments under hydrostatic pressure provide insight into the nature of materials under extreme conditions, and also provide a means for altering deformation behavior in a controlled fashion. The approach has a long history demonstrating that pressure enhances ductility in general, and produces enhanced hardening relative to that expected from normal cold work in the BCC metals Mo, Ta and Nb{sup 2}. The pressure hardening is in excess of that predicted from the measured increase in shear modulus at pressure, and therefore is likely due to a dislocation mechanism, such as suppression of kink pair formation or the interaction of forest dislocation cores, and not from lattice resistance. The effect has not been observed in FCC metals, suggesting a fundamental difference between deformation mechanisms at pressure for the two classes. The purpose of this letter is to investigate the origin of pressure hardening with new experiments that extend the pressure range beyond 3 GPa, the upper limit of conventional large sample (1cm{sup 3}) testing methods. Most previous high pressure deformation studies have been on poly crystals, relying on model dependent analysis to infer the maximum deviatoric stress that a deformed sample can support. In one experiment, a

  12. The Ni and Co substitutions in iron chalcogenide single crystals

    NASA Astrophysics Data System (ADS)

    Bezusyy, V. L.; Gawryluk, D. J.; Malinowski, A.; Berkowski, M.; Cieplak, Marta Z.

    2015-03-01

    We study the ab-plane resistivity and Hall effect in Fe1-yMyTe0.65Se0.35 single crystals with M =Co or Ni, and y up to 0.2. The crystals are grown by Bridgman's method. The low-temperature Hall coefficient RH changes sign to negative for crystals with y exceeding 0.135 (Co) and 0.06 (Ni), consistent with the electron doping induced by these impurities. However, the RH remains positive for all samples at high T, suggesting that remnant hole pockets survive the doping, but the holes become localized at low T in heavily doped crystals. Superconducting transition temperature (Tc) approaches zero for y = 0.14 (Co), and 0.03 (Ni), while the resistivity at the Tc onset is only weakly affected by Co doping, but it increases strongly for the Ni. These results suggest that in case of Co impurity the Tc suppression may be attributed to electron doping. On the other hand, the Ni substitution, in addition to electron doping, induces strong localization effects at small impurity contents. Using two-band conduction model we argue that the localization of electron carriers is responsible for strong superconductivity suppression by Ni impurity. Supported by EC through the FunDMS Advanced Grant of the ERC (FP7 Ideas), by the Polish NCS Grant 2011/01/B/ST3/00462, and by the French-Polish Program PICS 2012. Performed in the laboratories co-financed by NanoFun Project POIG.02.02.00-00-025/09.

  13. Growth and properties of Lithium Salicylate single crystals

    SciTech Connect

    Zaitseva, N; Newby, J; Hull, G; Saw, C; Carman, L; Cherepy, N; Payne, S

    2009-02-13

    An attractive feature of {sup 6}Li containing fluorescence materials that determines their potential application in radiation detection is the capture reaction with slow ({approx}< 100 keV) neutrons: {sup 6}Li + n = {sup 4}He + {sup 3}H + 4.8MeV. The use of {sup 6}Li-salicylate (LiSal, LiC{sub 6}H{sub 5}O{sub 3}) for thermal neutron detection was previously studied in liquid and polycrystalline scintillators. The studies showed that both liquid and polycrystalline LiSal scintillators could be utilized in pulse shape discrimination (PSD) techniques that enable separation of neutrons from the background gamma radiation. However, it was found that the efficiency of neutron detection using LiSal in liquid solutions was severely limited by its low solubility in commonly used organic solvents like, for example, toluene or xylene. Better results were obtained with neutron detectors containing the compound in its crystalline form, such as pressed pellets, or microscopic-scale (7-14 micron) crystals dispersed in various media. The expectation drown from these studies was that further improvement of pulse height, PSD, and efficiency characteristics could be reached with larger and more transparent LiSal crystals, growth of which has not been reported so far. In this paper, we present the first results on growth and characterization of relatively large, a cm-scale size, single crystals of LiSal with good optical quality. The crystals were grown both from aqueous and anhydrous (methanol) media, mainly for neutron detection studies. However, the results on growth and structural characterization may be interesting for other fields where LiSal, together with other alkali metal salicylates, is used for biological, medical, and chemical (as catalyst) applications.

  14. Process for Making Single-Domain Magnetite Crystals

    NASA Technical Reports Server (NTRS)

    Golden, D. C.; Ming, Douglas W.; Morris, Richard V.; Lofgren, Gary E.; McKay, Gordan A.; Schwandt, Craig S.; Lauer, Howard V., Jr.; Socki, Richard A.

    2004-01-01

    A process for making chemically pure, single-domain magnetite crystals substantially free of structural defects has been invented as a byproduct of research into the origin of globules in a meteorite found in Antarctica and believed to have originated on Mars. The globules in the meteorite comprise layers of mixed (Mg, Fe, and Ca) carbonates, magnetite, and iron sulfides. Since the discovery of the meteorite was announced in August 1996, scientists have debated whether the globules are of biological origin or were formed from inorganic materials by processes that could have taken place on Mars. While the research that led to the present invention has not provided a definitive conclusion concerning the origin of the globules, it has shown that globules of a different but related chemically layered structure can be grown from inorganic ingredients in a multistep precipitation process. As described in more detail below, the present invention comprises the multistep precipitation process plus a subsequent heat treatment. The multistep precipitation process was demonstrated in a laboratory experiment on the growth of submicron ankerite crystals, overgrown by submicron siderite and pyrite crystals, overgrown by submicron magnesite crystals, overgrown by submicron siderite and pyrite. In each step, chloride salts of appropriate cations (Ca, Fe, and Mg) were dissolved in deoxygenated, CO2- saturated water. NaHCO3 was added as a pH buffer while CO2 was passed continuously through the solution. A 15-mL aliquot of the resulting solution was transferred into each of several 20 mL, poly(tetrafluoroethylene)-lined hydrothermal pressure vessels. The vessels were closed in a CO2 atmosphere, then transferred into an oven at a temperature of 150 C. After a predetermined time, the hydrothermal vessels were removed from the oven and quenched in a freezer. Supernatant solutions were decanted, and carbonate precipitates were washed free of soluble salts by repeated decantations with

  15. Simulated morphological landscape of polymer single crystals by phase field model

    NASA Astrophysics Data System (ADS)

    Wang, Dong; Shi, Tongfei; Chen, Jizhong; An, Lijia; Jia, Yuxi

    2008-11-01

    The novel phase field model with the "polymer characteristic" was established based on a nonconserved spatiotemporal Ginzburg-Landau equation (TDGL model A). Especially, we relate the diffusion equation with the crystal growth faces of polymer single crystals. Namely, the diffusion equations are discretized according to the diffusion coefficient of every lattice site in various crystal growth faces and the shape of lattice is selected based on the real proportion of the unit cell dimensions. Spatiotemporal growth of syndiotactic polypropylene single crystals during isothermal crystallization has been investigated theoretically based on this phase field model. Two dimensional numerical calculations are performed to elucidate the faceted single crystal growth including square, rectangular, lozenge-shaped, and hexagonal single crystals. Our simulated patterns are in good agreement with the experimental morphologies, and the physical origin of polymer single crystal growth is discussed.

  16. The fatigue damage behavior of a single crystal superalloy

    NASA Technical Reports Server (NTRS)

    Mcgaw, Michael A.

    1988-01-01

    The uniaxial fatigue behavior of a single crystal superalloy, PWA 1480, is described. Both monotonic tensile and constant amplitude fatigue tests were conducted at room temperature, in an effort to assess the applicability of polycrystalline-based fatigue life prediction methods to a single crystal superalloy. The observed constant amplitude behavior correlated best using a stress-based life criterion. Nearly all specimens failed at surface or slightly subsurface microporosity; this is thought to be responsible for the unusually large amount of scatter in the test results. An additional term is developed in the stress-life equation for the purpose of accounting for the effect of microporosity on fatigue life. The form chosen is a function of the effective area of the failure-producing microporosity projected on a plane perpendicular to the loading axis, as well as the applied stress. This additional term correlated the data to within factors of two on life. Although speculative, extrapolation of the microporosity relation to zero micropore area indicates that approximately an order of magnitude improvement in fatigue life should result.

  17. OSL studies of alkali fluoroperovskite single crystals for radiation dosimetry

    NASA Astrophysics Data System (ADS)

    Daniel, D. Joseph; Raja, A.; Madhusoodanan, U.; Annalakshmi, O.; Ramasamy, P.

    2016-08-01

    This paper presents a preliminary investigation of the optically stimulated luminescence (OSL) of alkali fluoroperovskite single crystals for radiation dosimetry. The perovskite-like KMgF3, NaMgF3 and LiBaF3 polycrystalline compounds doped with rare earths (Eu2+ and Ce3+) were synthesized by standard solid state reaction technique. Phase purity of the synthesized compounds was analyzed by powder X-ray diffraction technique. Single crystals of these compounds have been grown from melt by using vertical Bridgman-Stockbarger method. The Linearly Modulated OSL and Continuous Wave OSL measurements were performed in these alkali fluorides using blue light stimulation. Thermal bleaching experiments have shown that OSL signals originate from traps which are unstable near 200 °C, thus proving the suitability of the signals for dosimetric purposes. Optical bleaching measurements were also performed for these fluoride samples. OSL dose response was studied as a function of dose which was found to increase with beta dose.

  18. Modal reduction in single crystal sapphire optical fiber

    NASA Astrophysics Data System (ADS)

    Cheng, Yujie; Hill, Cary; Liu, Bo; Yu, Zhihao; Xuan, Haifeng; Homa, Daniel; Wang, Anbo; Pickrell, Gary

    2015-10-01

    A type of single crystal sapphire optical fiber (SCSF) design is proposed to reduce the number of guided modes via a highly dispersive cladding with a periodic array of high- and low-index regions in the azimuthal direction. The structure retains a "core" region of pure single crystal (SC) sapphire in the center of the fiber and a "cladding" region of alternating layers of air and SC sapphire in the azimuthal direction that is uniform in the radial direction. The modal characteristics and confinement losses of the fundamental mode were analyzed via the finite element method by varying the effective core diameter and the dimensions of the "windmill"-shaped cladding. The simulation results showed that the number of guided modes was significantly reduced in the windmill fiber design, as the radial dimension of the air and SC sapphire cladding regions increase with corresponding decrease in the azimuthal dimension. It is anticipated that the windmill SCSF will readily improve the performance of current fiber optic sensors in the harsh environment and potentially enable those that were limited by the extremely large modal volume of unclad SCSF.

  19. High yield, single crystal ice via the Bridgman method

    NASA Astrophysics Data System (ADS)

    Bisson, Patrick; Groenzin, Henning; Barnett, Irene Li; Shultz, Mary Jane

    2016-03-01

    The surface chemistry of ice and of water is an important topic of study, especially given the role of ice and water in shaping the environment. Although snow, granular, and polycrystalline ice are often used in research, there are applications where large surface areas of a known crystallographic plane are required. For example, fundamental spectroscopy or scattering studies rely on large area samples of known crystalline orientation. In addition, due to its slower dynamics and decreased number of molecular configurations, ice can be viewed as a reduced complexity model for the complex hydrogen bonding environment found at the surface and within the bulk of liquid water. In our studies using Sum Frequency Generation (SFG) vibrational spectroscopy, we have shown that each crystalline face has a unique spectral signature and therefore a unique chemistry and chemical activity. A reliable, reproducible, high performance method of producing large single crystal samples is needed to support this surface chemistry research. The design, construction, and use of a computer-controlled, ice-growth machine based on the Stockbarger modified Bridgeman technique is described. The instrument reliably produces relatively large single crystals that are optically flawless (that is, no visible flaws when viewed in a crossed polarizer), and in very high yield. Success rates of 95% are typical. Such performance has not been observed in the literature.

  20. Synthesis of millimeter-scale transition metal dichalcogenides single crystals

    DOE PAGES

    Gong, Yongji; Ye, Gonglan; Lei, Sidong; Shi, Gang; Vajtai, Robert; Pantelides, Sokrates T.; Zhou, Wu; Li, Bo; Ajayan, Pullikel M.

    2016-02-10

    The emergence of semiconducting transition metal dichalcogenide (TMD) atomic layers has opened up unprecedented opportunities in atomically thin electronics. Yet the scalable growth of TMD layers with large grain sizes and uniformity has remained very challenging. Here is reported a simple, scalable chemical vapor deposition approach for the growth of MoSe2 layers is reported, in which the nucleation density can be reduced from 105 to 25 nuclei cm-2, leading to millimeter-scale MoSe2 single crystals as well as continuous macrocrystalline films with millimeter size grains. The selective growth of monolayers and multilayered MoSe2 films with well-defined stacking orientation can also bemore » controlled via tuning the growth temperature. In addition, periodic defects, such as nanoscale triangular holes, can be engineered into these layers by controlling the growth conditions. The low density of grain boundaries in the films results in high average mobilities, around ≈42 cm2 V-1 s-1, for back-gated MoSe2 transistors. This generic synthesis approach is also demonstrated for other TMD layers such as millimeter-scale WSe2 single crystals.« less

  1. Joint Development of a Fourth Generation Single Crystal Superalloy

    NASA Technical Reports Server (NTRS)

    Walston, S.; Cetel, A.; MacKay, R.; OHara, K.; Duhl, D.; Dreshfield, R.

    2004-01-01

    A new, fourth generation, single crystal superalloy has been jointly developed by GE Aircraft Engines, Pratt & Whitney, and NASA. The focus of the effort was to develop a turbine airfoil alloy with long-term durability for use in the High Speed Civil Transport. In order to achieve adequate long-time strength improvements at moderate temperatures and retain good microstructural stability, it was necessary to make significant composition changes from 2nd and 3rd generation single crystal superalloys. These included lower chromium levels, higher cobalt and rhenium levels and the inclusion of a new alloying element, ruthenium. It was found that higher Co levels were beneficial to reducing both TCP precipitation and SRZ formation. Ruthenium caused the refractory elements to partition more strongly to the ' phase, which resulted in better overall alloy stability. The final alloy, EPM 102, had significant creep rupture and fatigue improvements over the baseline production alloys and had acceptable microstructural stability. The alloy is currently being engine tested and evaluated for advanced engine applications.

  2. Modal reduction in single crystal sapphire optical fiber

    SciTech Connect

    Cheng, Yujie; Hill, Cary; Liu, Bo; Yu, Zhihao; Xuan, Haifeng; Homa, Daniel; Wang, Anbo; Pickrell, Gary

    2015-10-12

    A new type of single crystal sapphire optical fiber (SCSF) design is proposed to reduce the number of guided modes via a highly dispersive cladding with a periodic array of high and low index regions in the azimuthal direction. The structure retains a “core” region of pure single crystal (SC) sapphire in the center of the fiber and a “cladding” region of alternating layers of air and SC sapphire in the azimuthal direction that is uniform in the radial direction. The modal characteristics and confinement losses of the fundamental mode were analyzed via the finite element method by varying the effective core diameter and the dimensions of the “windmill” shaped cladding. The simulation results showed that the number of guided modes were significantly reduced in the “windmill” fiber design, as the radial dimension of the air and SC sapphire cladding regions increase with corresponding decrease in the azimuthal dimension. It is anticipated that the “windmill” SCSF will readily improve the performance of current fiber optic sensors in the harsh environment and potentially enable those that were limited by the extremely large modal volume of unclad SCSF.

  3. Ambipolar Electric Double Layer Transistors Using Organic Single Crystals

    NASA Astrophysics Data System (ADS)

    Takenobu, Taishi; Wen, Di; Shimotani, Hidekazu; Ono, Shimpei; Iwasa, Yoshihiro

    2011-03-01

    Among organic devices, ambipolar transistors are very unique device, in which both electrons and holes are equally mobile and we are able to observe light emission through the recombination of them. Progress in the applications of such light-emitting transistors (LETs) based on organic single crystals has provided possibilities in developing organic laser. However, in these LETs, the current density is still low for lasing, and, therefore, a different device structure is necessary to overcome this issue. Here we show the first demonstration of organic ambipolar electric double layer transistors (EDLTs), in which the gate dielectric is not a conventional insulator but an electrolyte. The peculiar merit of EDLT is extremely high conductivity due to the huge capacitance of the EDL formed at the organic/electrolyte interfaces. Consequently, we can increase current density. In this study, we used rubrene single crystal and ion-gel as the active material and electrolyte, respectively. These present results will provide a prospect for further development in LET operation.

  4. Magnetoelectric interactions in single crystal ferrite-piezoelectric bilayers

    NASA Astrophysics Data System (ADS)

    Srinivasan, G.; Petrov, V. M.; Zhai, J.

    2005-03-01

    The nature of low-frequency (10-2 - 10^4 Hz) magnetoelectric (ME) coupling has been investigated in bilayers of single crystal Ni-Zn ferrites and polycrystalline lead zirconate titanate or single crystal lead magnesium niobate-lead titanate. Important observations are as follows. (i) The ME coupling in the bilayers is found to be stronger than in polycrystalline multilayers [1]. (ii) Zn substitution in ferrite is found to enhance the strength of ME interactions. (iii) ME voltage coefficients show significant variation with the orientation of the bias magnetic field. (iv) Data analysis using our model reveals that superior magneto-mechanical coupling in the ferrites is the cause of strong ME interactions [2]. 1. G. Srinivasan, E. T. Rasmussen, and R. Hayes Phys. Rev. B. 67, 014418 (2003). 2. M. I. Bichurin, V. M. Petrov and G. Srinivasan. Phys. Rev. B. 68, 054402 (2003). - supported by grants from the the National Science Foundation (DMR-0302254), Russian Ministry of Education (Å02-3.4-278), and the Universities of Russia Foundation (UNR 01.01.026).

  5. Single Crystal Diamond Needle as Point Electron Source

    PubMed Central

    Kleshch, Victor I.; Purcell, Stephen T.; Obraztsov, Alexander N.

    2016-01-01

    Diamond has been considered to be one of the most attractive materials for cold-cathode applications during past two decades. However, its real application is hampered by the necessity to provide appropriate amount and transport of electrons to emitter surface which is usually achieved by using nanometer size or highly defective crystallites having much lower physical characteristics than the ideal diamond. Here, for the first time the use of single crystal diamond emitter with high aspect ratio as a point electron source is reported. Single crystal diamond needles were obtained by selective oxidation of polycrystalline diamond films produced by plasma enhanced chemical vapor deposition. Field emission currents and total electron energy distributions were measured for individual diamond needles as functions of extraction voltage and temperature. The needles demonstrate current saturation phenomenon and sensitivity of emission to temperature. The analysis of the voltage drops measured via electron energy analyzer shows that the conduction is provided by the surface of the diamond needles and is governed by Poole-Frenkel transport mechanism with characteristic trap energy of 0.2–0.3 eV. The temperature-sensitive FE characteristics of the diamond needles are of great interest for production of the point electron beam sources and sensors for vacuum electronics. PMID:27731379

  6. Modal reduction in single crystal sapphire optical fiber

    DOE PAGES

    Cheng, Yujie; Hill, Cary; Liu, Bo; Yu, Zhihao; Xuan, Haifeng; Homa, Daniel; Wang, Anbo; Pickrell, Gary

    2015-10-12

    A new type of single crystal sapphire optical fiber (SCSF) design is proposed to reduce the number of guided modes via a highly dispersive cladding with a periodic array of high and low index regions in the azimuthal direction. The structure retains a “core” region of pure single crystal (SC) sapphire in the center of the fiber and a “cladding” region of alternating layers of air and SC sapphire in the azimuthal direction that is uniform in the radial direction. The modal characteristics and confinement losses of the fundamental mode were analyzed via the finite element method by varying themore » effective core diameter and the dimensions of the “windmill” shaped cladding. The simulation results showed that the number of guided modes were significantly reduced in the “windmill” fiber design, as the radial dimension of the air and SC sapphire cladding regions increase with corresponding decrease in the azimuthal dimension. It is anticipated that the “windmill” SCSF will readily improve the performance of current fiber optic sensors in the harsh environment and potentially enable those that were limited by the extremely large modal volume of unclad SCSF.« less

  7. Single Crystal Diamond Needle as Point Electron Source

    NASA Astrophysics Data System (ADS)

    Kleshch, Victor I.; Purcell, Stephen T.; Obraztsov, Alexander N.

    2016-10-01

    Diamond has been considered to be one of the most attractive materials for cold-cathode applications during past two decades. However, its real application is hampered by the necessity to provide appropriate amount and transport of electrons to emitter surface which is usually achieved by using nanometer size or highly defective crystallites having much lower physical characteristics than the ideal diamond. Here, for the first time the use of single crystal diamond emitter with high aspect ratio as a point electron source is reported. Single crystal diamond needles were obtained by selective oxidation of polycrystalline diamond films produced by plasma enhanced chemical vapor deposition. Field emission currents and total electron energy distributions were measured for individual diamond needles as functions of extraction voltage and temperature. The needles demonstrate current saturation phenomenon and sensitivity of emission to temperature. The analysis of the voltage drops measured via electron energy analyzer shows that the conduction is provided by the surface of the diamond needles and is governed by Poole-Frenkel transport mechanism with characteristic trap energy of 0.2–0.3 eV. The temperature-sensitive FE characteristics of the diamond needles are of great interest for production of the point electron beam sources and sensors for vacuum electronics.

  8. Simultaneous SHG of orthogonally polarized fundamentals in single QPM crystals

    NASA Astrophysics Data System (ADS)

    Johnston, Benjamin F.; Saltiel, Solomon M.; Withford, Michael J.; Kivshar, Yuri S.

    2007-02-01

    Fabrication of quasi-phase-matching (QPM) gratings suitable for cascading of two second-order parametric nonlinear processes in a single lithium niobate crystal is being undertaken using a new technique - electric field poling assisted by laser micro-machined topographical electrodes. To date, single period poled gratings with 45.75, and 45.8 μm periods have been fabricated in order to demonstrate second harmonic generation of 1064nm laser light with 1 st order type-I and 7 th order type-0 QPM simultaneously. The two frequency doubling processes share a common Z polarized second-harmonic wave which allows exchange of energy between the two orthogonally polarized fundamental waves and several second order cascading interactions can be realized. The use of the higher QPM orders (3rd, 5th or 7th) for the type-0 second harmonic generation process leads to comparable efficiencies of the two processes, as the respective nonlinear coefficients are d zzz ~27 pm/V and d yyz ~ 4.7 pm/V in lithium niobate crystals. Possible applications include; polarization switching, parametric amplification and polarization mode dispersion monitoring, and polarization insensitive second harmonic generation.

  9. Impact Response of Single Crystal Potassium Chloride at Elevated Temperatures

    NASA Astrophysics Data System (ADS)

    Golkov, R.; Kleiman, D.; Zaretsky, E.

    2004-07-01

    Two types of planar impact experiments were performed with [100]-oriented single crystals of potassium chloride (KCl) having initial temperatures ranged from 293 to 523 K. In the experiments of the first type the maximum impact strength did not exceed the pressure Ptr of B1-B2 transformation in KCl. In these experiments the aluminum buffers were placed between the impactor and the sample and the velocity of aluminum-KCl interface was measured by VISAR. The impact strength in the experiments of the second type (with copper buffers) was higher than Ptr and the VISAR was used for monitoring the free surface velocity of the KCl samples. Temperature dependencies of the longitudinal and the bulk sound velocities obtained in the experiments of the first type were used for the treatment of the results of the second-type experiments. The results show clearly the deceleration of the B1-B2 transformation kinetics and the increase of the KCl yield strength with temperature. Similar temperature-induced strengthening was observed recently in aluminum single crystals [G.I. Kanelet et al, J. Appl. Phys. 90, (2001) 136]. The value of the transformation entropy determined from the temperature dependence of Ptr is found to be close to zero.

  10. Single crystal to single crystal topochemical photoreactions: measuring the degree of disorder in the [2+2] photodimerization of trans-cinnamic acid using single-crystal 13C NMR spectroscopy.

    PubMed

    Nieuwendaal, Ryan C; Mattler, Sarah J; Bertmer, Marko; Hayes, Sophia E

    2011-05-19

    A single crystal of α-trans-cinnamic acid was synthesized with a (13)C-label at the β-carbon position and photoreacted to yield the [2+2] cycloaddition product, α-truxillic acid. (13)C{(1)H} cross-polarization (CP) single-crystal NMR experiments were performed on the unreacted and sequentially photoreacted samples for different goniometer orientations, and the spectra were simulated using the SIMMOL and SIMPSON software packages. Atomic coordinates from single-crystal X-ray diffraction data were used as inputs in the simulations, which allowed the chemical shift tensor to be precisely measured and related to the unit cell (or molecular) reference frame of cinnamic acid. The line widths of the (13)C resonances observed at different goniometer rotations were utilized to estimate the orientational dispersion of the cinnamic acid species, which ultimately provides a measure of disorder in the single crystal. The photoreacted sample, a solid solution of cinnamic and truxillic acids, maintained its single-crystal nature, even up to 44% conversion to truxillic acid, keeping its P2(1)/n symmetry. Upon photoirradiation, however, a slight loss of order was observed in the cinnamic acid species as evidenced by an increase in the (13)C NMR line widths, demonstrating that NMR can be used to monitor subtle orientational imperfections in single crystal to single crystal photoreactions.

  11. Microwave absorption in single crystals of lanthanum aluminate

    NASA Astrophysics Data System (ADS)

    Zuccaro, Claudio; Winter, Michael; Klein, Norbert; Urban, Knut

    1997-12-01

    A very sensitive dielectric resonator technique is employed to measure loss tangent tan δ and relative permittivity ɛr of lanthanum aluminate (LaAlO3) single crystals at 4-300 K and 4-12 GHz. A variety of single crystals grown by different techniques and purchased from different suppliers are considered. For T>150 K the loss tangent tan δ is almost sample independent with linear frequency dependence and monotonous temperature variation from 8×10-6 at 300 K to 2.5×10-6 at 150 K and 4.1 GHz. In this temperature range the experimental data are explained by a model based on lifetime broadened two-phonon difference processes. The loss tangent below 150 K is characterized by a peak in tan δ(T) at about 70 K. The height of this peak is frequency and strongly sample dependent. This leads to a variation of the loss tangent from 10-6 to 1.5×10-5 at 77 K and 8.6 GHz, the lowest values are generally achieved with Verneuil grown crystals and approach the intrinsic lower limit predicted by the phonon model. The peak is explained by defect dipole relaxation (local motions of ions). The activation energy of the relaxation process is determined from the measured data to be 31 meV. This low value indicates that the defect dipoles are associated with interstitials, possibly impurities in interstitial positions. Considering absorption due to phonons and due to defect dipole relaxation the loss tangent is calculated for a wide frequency range.

  12. Deformation of olivine single crystals under lithospheric conditions

    NASA Astrophysics Data System (ADS)

    Demouchy, S.; Tommasi, A.; Cordier, P.

    2012-12-01

    The rheology of mantle rocks at lithospheric temperatures (<1000°C) remains poorly constrained, in contrast to the extensive experimental data on creep of olivine single crystals and polycrystalline aggregates at high temperature (T > 1200°C). Consequently, we have performed tri-axial compression experiments on oriented single crystals and polycrystalline aggregates of San Carlos olivine at temperatures ranging from 800° to 1090°C. The experiments were carried out at a confining pressure of 300 MPa in a high-resolution gas-medium mechanical testing apparatus at constant strain rates ranging from 7 × 10-6 s-1 to 1 × 10-4 s-1 . Compression was applied along three different crystallographic directions: [101]c, [110]c and [011]c, to activate the several slip systems. Yield differential stresses range from 88 to 1076 MPa. To constrain hardening, stick-and-slip, or strain localization behaviors, all samples were deformed at constant displacement rate for finite strains between 4 to 23 %. Hardening was observed in all experiments and the maximum differential stress often overcame the confining pressure. EBSD mapping highlights macroscale bending of the crystalline network in three crystals. TEM observations on several samples show dislocations with [100] and [001] Burgers vectors in all samples, but dislocation arrangements vary. The results from the present study permit to refining the power-law expressing the strain rate dependence on stress and temperature for olivine, allowing its application to the lithospheric mantle. Our experiments confirm that previous published high-temperature power flow laws overestimate the strength of lithospheric mantle and that the transition to low-temperature creep occurs at higher temperatures than it has previously been established.

  13. Hemoglobin Variants: Biochemical Properties and Clinical Correlates

    PubMed Central

    Thom, Christopher S.; Dickson, Claire F.; Gell, David A.; Weiss, Mitchell J.

    2013-01-01

    Diseases affecting hemoglobin synthesis and function are extremely common worldwide. More than 1000 naturally occurring human hemoglobin variants with single amino acid substitutions throughout the molecule have been discovered, mainly through their clinical and/or laboratory manifestations. These variants alter hemoglobin structure and biochemical properties with physiological effects ranging from insignificant to severe. Studies of these mutations in patients and in the laboratory have produced a wealth of information on hemoglobin biochemistry and biology with significant implications for hematology practice. More generally, landmark studies of hemoglobin performed over the past 60 years have established important paradigms for the disciplines of structural biology, genetics, biochemistry, and medicine. Here we review the major classes of hemoglobin variants, emphasizing general concepts and illustrative examples. PMID:23388674

  14. Hemoglobin variants: biochemical properties and clinical correlates.

    PubMed

    Thom, Christopher S; Dickson, Claire F; Gell, David A; Weiss, Mitchell J

    2013-03-01

    Diseases affecting hemoglobin synthesis and function are extremely common worldwide. More than 1000 naturally occurring human hemoglobin variants with single amino acid substitutions throughout the molecule have been discovered, mainly through their clinical and/or laboratory manifestations. These variants alter hemoglobin structure and biochemical properties with physiological effects ranging from insignificant to severe. Studies of these mutations in patients and in the laboratory have produced a wealth of information on hemoglobin biochemistry and biology with significant implications for hematology practice. More generally, landmark studies of hemoglobin performed over the past 60 years have established important paradigms for the disciplines of structural biology, genetics, biochemistry, and medicine. Here we review the major classes of hemoglobin variants, emphasizing general concepts and illustrative examples.

  15. CH3NH3PbCl3 Single Crystals: Inverse Temperature Crystallization and Visible-Blind UV-Photodetector.

    PubMed

    Maculan, Giacomo; Sheikh, Arif D; Abdelhady, Ahmed L; Saidaminov, Makhsud I; Haque, Md Azimul; Murali, Banavoth; Alarousu, Erkki; Mohammed, Omar F; Wu, Tom; Bakr, Osman M

    2015-10-01

    Single crystals of hybrid perovskites have shown remarkably improved physical properties compared to their polycrystalline film counterparts, underscoring their importance in the further development of advanced semiconductor devices. Here we present a new method of growing sizable CH3NH3PbCl3 single crystals based on the retrograde solubility behavior of hybrid perovskites. We show, for the first time, the energy band structure, charge recombination, and transport properties of CH3NH3PbCl3 single crystals. These crystals exhibit trap-state density, charge carrier concentration, mobility, and diffusion length comparable with the best quality crystals of methylammonium lead iodide or bromide perovskites reported so far. The high quality of the crystal along with its suitable optical band gap enabled us to build an efficient visible-blind UV-photodetector, demonstrating its potential in optoelectronic applications.

  16. Postsynthetic Improvement of the Physical Properties in a Metal-Organic Framework through a Single Crystal to Single Crystal Transmetallation.

    PubMed

    Grancha, Thais; Ferrando-Soria, Jesús; Zhou, Hong-Cai; Gascon, Jorge; Seoane, Beatriz; Pasán, Jorge; Fabelo, Oscar; Julve, Miguel; Pardo, Emilio

    2015-05-26

    A single crystal to single crystal transmetallation process takes place in the three-dimensional (3D) metal-organic framework (MOF) of formula Mg(II) 2 {Mg(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅45 H2 O (1; Me3 mpba(4-) =N,N'-2,4,6-trimethyl-1,3-phenylenebis(oxamate)). After complete replacement of the Mg(II) ions within the coordination network and those hosted in the channels by either Co(II) or Ni(II) ions, 1 is transmetallated to yield two novel MOFs of formulae Co2 (II) {Co(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅56 H2 O (2) and Ni2 (II) {Ni(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅ 54 H2 O (3). This unique postsynthetic metal substitution affords materials with higher structural stability leading to enhanced gas sorption and magnetic properties. PMID:25873186

  17. Postsynthetic Improvement of the Physical Properties in a Metal-Organic Framework through a Single Crystal to Single Crystal Transmetallation.

    PubMed

    Grancha, Thais; Ferrando-Soria, Jesús; Zhou, Hong-Cai; Gascon, Jorge; Seoane, Beatriz; Pasán, Jorge; Fabelo, Oscar; Julve, Miguel; Pardo, Emilio

    2015-05-26

    A single crystal to single crystal transmetallation process takes place in the three-dimensional (3D) metal-organic framework (MOF) of formula Mg(II) 2 {Mg(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅45 H2 O (1; Me3 mpba(4-) =N,N'-2,4,6-trimethyl-1,3-phenylenebis(oxamate)). After complete replacement of the Mg(II) ions within the coordination network and those hosted in the channels by either Co(II) or Ni(II) ions, 1 is transmetallated to yield two novel MOFs of formulae Co2 (II) {Co(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅56 H2 O (2) and Ni2 (II) {Ni(II) 4 [Cu(II) 2 (Me3 mpba)2 ]3 }⋅ 54 H2 O (3). This unique postsynthetic metal substitution affords materials with higher structural stability leading to enhanced gas sorption and magnetic properties.

  18. Imatinib (Gleevec@) conformations observed in single crystals, protein-Imatinib co-crystals and molecular dynamics: Implications for drug selectivity

    NASA Astrophysics Data System (ADS)

    Golzarroshan, B.; Siddegowda, M. S.; Li, Hong qi; Yathirajan, H. S.; Narayana, B.; Rathore, R. S.

    2012-06-01

    Structure and dynamics of the Leukemia drug, Imatinib, were examined using X-ray crystallography and molecular dynamics studies. Comparison of conformations observed in single crystals with several reported co-crystals of protein-drug complexes suggests existence of two conserved conformations of Imatinib, extended and compact (or folded), corresponding to two binding modes of interaction with the receptor. Furthermore, these conformations are conserved throughout a dynamics simulation. The present study attempts to draw a parallel on conformations and binding patterns of interactions, obtained from small-molecule single-crystal and macromolecule co-crystal studies, and provides structural insights for understanding the high selectivity of this drug molecule.

  19. Design and analysis of large-core single-mode windmill single crystal sapphire optical fiber

    DOE PAGES

    Cheng, Yujie; Hill, Cary; Liu, Bo; Yu, Zhihao; Xuan, Haifeng; Homa, Daniel; Wang, Anbo; Pickrell, Gary

    2016-06-01

    We present a large-core single-mode “windmill” single crystal sapphire optical fiber (SCSF) design, which exhibits single-mode operation by stripping off the higher-order modes (HOMs) while maintaining the fundamental mode. The “windmill” SCSF design was analyzed using the finite element analysis method, in which all the HOMs are leaky. The numerical simulation results show single-mode operation in the spectral range from 0.4 to 2 μm in the windmill SCSF, with an effective core diameter as large as 14 μm. Such fiber is expected to improve the performance of many of the current sapphire fiber optic sensor structures.

  20. The Role of Weak Interactions in the Mechano-induced Single-Crystal-to-Single-Crystal Phase Transition of 8-Hydroxyquinoline-Based Co-crystals.

    PubMed

    Liu, Jie; Liu, Guangfeng; Liu, Yang; Zheng, Xiaoxin; Han, Quanxiang; Ye, Xin; Tao, Xutang

    2016-06-01

    Mechano-induced single-crystal-to-single-crystal (SCSC) phase transitions in crystalline materials that change their properties have received more and more attention. However, there are still too few examples to study molecular-level mechanisms in the mechano-induced SCSC phase transitions, making the systematic and in-depth understanding very difficult. We report that bis-(8-hydroxyquinolinato) palladium(II)-tetracyanoquinodimethane (PdQ2 -TCNQ) and bis-(8-hydroxyquinolinato) copper(II)-tetracyanoquinodimethane (CuQ2 -TCNQ) show very different mechano-response behaviors during the SCSC phase transition. Phase transition in CuQ2 -TCNQ can be triggered by pricking on the crystal surface, while in PdQ2 -TCNQ it can only be induced by applying pressure uniformly over the whole crystal face. The crystallography data and Hirshfeld surface analysis indicate that the weak intra-layer C-H⋅⋅⋅O, C-H⋅⋅⋅N hydrogen bonds and inter-layer stacking interactions determine the feasibility of the SCSC phase transition by mechanical stimuli. Weaker intra-layer interactions and looser inter-layer stacking make the SCSC phase transition occur much more easily in the CuQ2 -TCNQ.

  1. Single Crystal DMs for Space-Based Observatories

    NASA Astrophysics Data System (ADS)

    Bierden, Paul

    We propose to demonstrate the feasibility of a new manufacturing process for large aperture, high-actuator count microelectromechanical deformable mirrors (MEMS-DMs). These DMs are designed to fill a critical technology gap in NASA s plan for high- contrast space-based exoplanet observatories. We will manufacture a prototype DM with a continuous mirror facesheet, having an active aperture of 50mm diameter, supported by 2040 electrostatic actuators (50 across the diameter of the active aperture), spaced at a pitch of 1mm. The DM will be manufactured using silicon microfabrication tools. The strategic motivation for the proposed project is to advance MEMS DMs as an enabling technology in NASA s rapidly emerging program for extrasolar planet exploration. That goal is supported by an Astro2010 white paper on Technologies for Direct Optical Imaging of Exoplanets, which concluded that DMs are a critical component for all proposed internal coronagraph instrument concepts. That white paper pointed to great strides made by DM developers in the past decade, and acknowledged the components made by Boston Micromachines Corporation to be the most notable MEMS-based technology option. The principal manufacturing innovation in this project will be assembly of the DM through fusion bonding of three separate single crystal silicon wafers comprising the device s substrate, actuator array, and facesheet. The most significant challenge of this project will be to develop processes that allow reliable fusion bonds between multiple compliant silicon layers while yielding an optically flat surface and a robust electromechanical system. The compliance of the DM, which is required for its electromechanical function, will make it challenging to achieve the intimate, planar contact that is generally needed for success in fusion bonding. The manufacturing approach will use photolithography and reactive ion etching to pattern structural layers. Three wafer-scale devices will be patterned and

  2. A preliminary review of organic materials single crystal growth by the Czochralski technique

    NASA Technical Reports Server (NTRS)

    Penn, B. G.; Shields, A. W.; Frazier, D. O.

    1988-01-01

    The growth of single crystals of organic compounds by the Czochralski method is reviewed. From the literature it is found that single crystals of benzil, a nonlinear optical material with a d sub 11 value of 11.2 + or - 1.5 x d sub 11 value of alpha quartz, has fewer dislocations than generally contained in Bridgman crystals. More perfect crystals were grown by repeated Czochralski growth. This consists of etching away the defect-containing portion of a Czochralski grown crystal and using it as a seed for further growth. Other compounds used to grow single crystals are benzophenone, 12-tricosanone (laurone), and salol. The physical properties, growth apparatus, and processing conditions presented in the literature are discussed. Moreover, some of the possible advantages of growing single crystals of organic compounds in microgravity to obtain more perfect crystals than on Earth are reviewed.

  3. Single-Crystal Elasticity of Ettringite at ambient conditions

    NASA Astrophysics Data System (ADS)

    Speziale, S.; Jiang, F.; Mao, Z.; Monteiro, P. J.; Wenk, H.; Duffy, T. S.; Schilling, F.

    2006-12-01

    Ettringite, [Ca6Al2 (SO4)3 (OH)12^{.}26H2O] is a natural trigonal sulfate and one of the most relevant crystalline components of Portland cement. It is both a primary crystalline product during cement paste consolidation and a secondary phase which develops during concrete degradation. Even though the understanding of the mechanical properties of cement paste and of consolidated concrete is a longstanding problem of engineering and materials science, we still have a poor knowledge of the physical properties of ettringite. This makes it difficult to develop quantitative models able to predict the behavior and properties of such a complex multi-component system. We have now determined the single-crystal elastic constants of natural ettringite by Brillouin spectroscopy at ambient conditions. Brillouin scattering was measured along 54 different directions from two 2 mm size platelets of approximate orientation (001) and (100) prepared from a large single crystal of ettringite from South Africa. The six non-zero single-crystal elastic constants of this trigonal mineral are: C11 = 35.1(1) GPa, C12 = 21.9(1) GPa, C13 = 20.0(5) GPa, C14 = 0.6(2) GPa, C_{33 = 55(1) GPa, C44 = 11.0(2) GPa. The Hill average of the aggregate bulk and shear modulus are 27.3(9) GPa and 9.9(1) GPa respectively, more than 35 percent smaller than the moduli of gypsum. Ettringite possesses a large elastic anisotropy, with a difference of 50 percent between the Young's modulus along the stiff c- axis and the a- axis. The rigidity in planes containing the c- axis is 40 percent higher than in the basal plane. The pattern of elastic anisotropy in ettringite is directly connected to its crystallographic structure and to its external morphology. In fact, stiff chains of [Al(OH) 6]^{3-} octahedra alternating with triplets of Ca2+ in eight-fold coordination run parallel to the c- axis. Development of secondary fibrous ettringite elongated parallel to c- axis might play a major role as a mechanism for

  4. Crystal growth, structural, thermal and mechanical behavior of L-arginine 4-nitrophenolate 4-nitrophenol dihydrate (LAPP) single crystals

    NASA Astrophysics Data System (ADS)

    Mahadevan, M.; Ramachandran, K.; Anandan, P.; Arivanandhan, M.; Bhagavannarayana, G.; Hayakawa, Y.

    2014-12-01

    Single crystals of L-arginine 4-nitrophenolate 4-nitrophenol dihydrate (LAPP) have been grown successfully from the solution of L-arginine and 4-nitrophenol. Slow evaporation of solvent technique was adopted to grow the bulk single crystals. Single crystal X-ray diffraction analysis confirms the grown crystal has monoclinic crystal system with space group of P21. Powder X-ray diffraction analysis shows the good crystalline nature. The crystalline perfection of the grown single crystals was analyzed by HRXRD by employing a multicrystal X-ray diffractometer. The functional groups were identified from proton NMR spectroscopic analysis. Linear and nonlinear optical properties were determined by UV-Vis spectrophotometer and Kurtz powder technique respectively. It is found that the grown crystal has no absorption in the green wavelength region and the SHG efficiency was found to be 2.66 times that of the standard KDP. The Thermal stability of the crystal was found by obtaining TG/DTA curve. The mechanical behavior of the grown crystal has been studied by Vicker's microhardness method.

  5. Twin nucleation and migration in FeCr single crystals

    SciTech Connect

    Patriarca, L.; Abuzaid, Wael; Sehitoglu, Huseyin; Maier, Hans J.; Chumlyakov, Y.

    2013-01-15

    Tension and compression experiments were conducted on body-centered cubic Fe -47.8 at pct. Cr single crystals. The critical resolved shear stress (CRSS) magnitudes for slip nucleation, twin nucleation and twin migration were established. We show that the nucleation of slip occurs at a CRSS of about 88 MPa, while twinning nucleates at a CRSS of about 191 MPa with an associated load drop. Following twin nucleation, twin migration proceeds at a CRSS that is lower than the initiation stress ( Almost-Equal-To 114-153 MPa). The experimental results of the nucleation stresses indicate that the Schmid law holds to a first approximation for the slip and twin nucleation cases, but to a lesser extent for twin migration particularly when considerable slip strains preceded twinning. The CRSSs were determined experimentally using digital image correlation (DIC) in conjunction with electron back scattering diffraction (EBSD). The DIC measurements enabled pinpointing the precise stress on the stress-strain curves where twins or slip were activated. The crystal orientations were obtained using EBSD and used to determine the activated twin and slip systems through trace analysis. - Highlights: Black-Right-Pointing-Pointer Digital image correlation allows to capture slip/twin initiation for bcc FeCr. Black-Right-Pointing-Pointer Crystal orientations from EBSD allow slip/twin system indexing. Black-Right-Pointing-Pointer Nucleation of slip always precedes twinning. Black-Right-Pointing-Pointer Twin growth is sustained with a lower stress than required for nucleation. Black-Right-Pointing-Pointer Twin-slip interactions provide high hardening at the onset of plasticity.

  6. Electron tunneling in single crystals of Pseudomonas aeruginosa azurins.

    PubMed

    Crane, B R; Di Bilio, A J; Winkler, J R; Gray, H B

    2001-11-28

    Rates of reduction of Os(III), Ru(III), and Re(I) by Cu(I) in His83-modified Pseudomonas aeruginosa azurins (M-Cu distance approximately 17 A) have been measured in single crystals, where protein conformation and surface solvation are precisely defined by high-resolution X-ray structure determinations: 1.7(8) x 10(6) s(-1) (298 K), 1.8(8) x 10(6) s(-1) (140 K), [Ru(bpy)2(im)(3+)-]; 3.0(15) x 10(6) s(-1) (298 K), [Ru(tpy)(bpy)(3+)-]; 3.0(15) x 10(6) s(-1) (298 K), [Ru(tpy)(phen)(3+)-]; 9.0(50) x 10(2) s(-1) (298 K), [Os(bpy)2(im)(3+)-]; 4.4(20) x 10(6) s(-1) (298 K), [Re(CO)3(phen)(+)] (bpy = 2,2'-bipyridine; im = imidazole; tpy = 2,2':6',2' '-terpyridine; phen = 1,10-phenanthroline). The time constants for electron tunneling in crystals are roughly the same as those measured in solution, indicating very similar protein structures in the two states. High-resolution structures of the oxidized (1.5 A) and reduced (1.4 A) states of Ru(II)(tpy)(phen)(His83)Az establish that very small changes in copper coordination accompany reduction but reveal a shorter axial interaction between copper and the Gly45 peptide carbonyl oxygen [2.6 A for Cu(II)] than had been recognized previously. Although Ru(bpy)2(im)(His83)Az is less solvated in the crystal, the reorganization energy for Cu(I) --> Ru(III) electron transfer falls in the range (0.6-0.8 eV) determined experimentally for the reaction in solution. Our work suggests that outer-sphere protein reorganization is the dominant activation component required for electron tunneling.

  7. Magnetic anisotropy in clinopyroxene and orthopyroxene single crystals

    NASA Astrophysics Data System (ADS)

    Biedermann, Andrea R.; Pettke, Thomas; Bender Koch, Christian; Hirt, Ann M.

    2015-03-01

    Pyroxenes constitute an important component in mafic igneous and metamorphic rocks. They often possess a prismatic habit, and their long axis, the crystallographic c axis, helps define a lineation in a textured rock. Anisotropy of magnetic susceptibility (AMS) serves as a fabric indicator in igneous and metamorphic rocks. If a rock's AMS is carried by pyroxenes, it can be related to their crystallographic preferred orientation and degree of alignment. This requires knowing the intrinsic AMS of pyroxene single crystals. This study provides a comprehensive low-field and high-field AMS investigation of chemically diverse orthopyroxene and clinopyroxene crystals in relation to crystal structure, chemical composition, oxidation state of Fe, and the possible presence of ferromagnetic inclusions. The paramagnetic anisotropy, extracted from high-field data, shows clear relationships to crystallographic directions and Fe concentration both in clinopyroxene and orthopyroxene. In the diopside-augite series, the intermediate susceptibility is parallel to b, and the maximum is at 45° to the c axis. In aegirine, the intermediate axis remains parallel to b, while the maximum susceptibility is parallel to c. The AMS of spodumene depends on Fe concentration. In enstatite, the maximum susceptibility aligns with c and the minimum with b, and in the case of hypersthene, the maximum susceptibility is normal to the exsolution lamellae. Magnetite inclusions within augite possess a ferromagnetic anisotropy with consistent orientation of the principal susceptibilities, which dominates the low-field anisotropy. These results provide better understanding of magnetic anisotropy in pyroxenes and form a solid basis for interpretation of magnetic fabrics in pyroxene-bearing rocks.

  8. Secondary orientation effects in a single crystal superalloy under mechanical and thermal loads

    NASA Technical Reports Server (NTRS)

    Kalluri, Sreeramesh; Abdul-Aziz, Ali; Mcgaw, Michael A.

    1991-01-01

    The nickel-base single crystal superalloy PWA 1480 is a candidate blading material for the advanced turbopump development program of the SSME. In order to improve thermal fatigue resistance of the turbine blades, the single crystal superalloy PWA 1480 is grown along the low modulus zone axes (001) crystal orientation by a directional solidification process. Since cubic single crystal materials such as PWA 1480 exhibit anisotropic elastic behavior, the stresses developed within the single crystal superalloy due to mechanical and thermal loads are likely to be affected by the exact orientation of the secondary crystallographic direction with respect to the geometry of the turbine blade. The effects of secondary crystal orientation on the elastic response of single crystal PWA 1480 superalloy were investigated.

  9. Growth, Structural, Spectral and Optical Studies of Glycine Sodium Nitrate Doped Potassium Dihydrogen Phosphate Single Crystals

    NASA Astrophysics Data System (ADS)

    Loretta, Fernando; Rani, T. Josephine; Perumal, S.; Ramalingom, S.

    2011-10-01

    Single crystals of Pure and Glycine sodium nitrate (GSN) doped Potassium dihydrogen Phosphate (KDP) were grown from aqueous solution by slow evaporation technique. The cell parameters of the grown pure and GSN doped KDP crystals were estimated by Single X-ray diffraction studies. The functional groups present in the grown crystals were ascertained using FTIR spectral analysis. The UV-Vis-NIR transmission spectra reveals that the semiorganic dopant has increased the optical transparency of the KDP crystals.

  10. Synthesis, Growth, Spectral and Optical Properties of Glycinyl Urea Single Crystal

    SciTech Connect

    Shanthi, N. Theresita; Selvarajan, P.; Rose, A. S. J. Lucia

    2011-10-20

    Single crystals of Glycinyl Urea were grown from aqueous solution by slow evaporation technique at room temperature. The cell parameters of the grown crystals were estimated by Single X-ray diffraction studies. The functional groups present in the grown crystals were ascertained using FTIR spectrum analysis. UV-visible transmittance spectrum was recorded to study the optical transparency of the grown crystal. The non-linear optical property has been tested by Kurtz powder technique.

  11. Crystal growth and spectroscopic properties of Er3+ ions doped CdF2 single crystals

    NASA Astrophysics Data System (ADS)

    Djellab, S.; Diaf, M.; Labbaci, K.; Guerbous, L.

    2014-04-01

    Single crystals of Er3+:CdF2 with good optical quality were grown by a Bridgman technique after purification of the starting materials. Absorption and emission spectra are recorded at room temperature. The Judd-Ofelt (JO) analysis was applied to obtain the three phenomenological intensity parameters and the transition strengths. These JO parameters are used to calculate the radiative transition probabilities, the radiation lifetimes and the branching ratios. The results obtained are in good agreement with those of other fluoride laser materials. We also carried out luminescence measurements for red and green emission. The studied host may offer infrared and visible laser emissions.

  12. Birefringence simulation of annealed ingot of calcium fluoride single crystal

    NASA Astrophysics Data System (ADS)

    Ogino, H.; Miyazaki, N.; Mabuchi, T.; Nawata, T.

    2008-01-01

    We developed a method for simulating birefringence of an annealed ingot of calcium fluoride single crystal caused by the residual stress after annealing process. The method comprises the heat conduction analysis that provides the temperature distribution during the ingot annealing, the elastic thermal stress analysis using the assumption of the stress-free temperature that provides the residual stress after annealing, and the birefringence analysis of an annealed ingot induced by the residual stress. The finite element method was applied to the heat conduction analysis and the elastic thermal stress analysis. In these analyses, the temperature dependence of material properties and the crystal anisotropy were taken into account. In the birefringence analysis, the photoelastic effect gives the change of refractive indices, from which the optical path difference in the annealed ingot is calculated by the Jones calculus. The relation between the Jones calculus and the approximate method using the stress components averaged along the optical path is discussed theoretically. It is found that the result of the approximate method agrees very well with that of the Jones calculus in birefringence analysis. The distribution pattern of the optical path difference in the annealed ingot obtained from the present birefringence calculation methods agrees reasonably well with that of the experiment. The calculated values also agree reasonably well with those of the experiment, when a stress-free temperature is adequately selected.

  13. Compensation mechanism of bromine dopants in cadmium telluride single crystals

    DOE PAGES

    Bolotnikov, A. E.; Fochuk, P. M.; Verzhak, Ye. V.; Parashchuk, T. O.; Freik, D. M.; Panchuk, O. E.; James, R. B.; Gorichok, I. V.

    2015-01-02

    We grew single crystals of cadmium telluride, doped with bromine by the Bridgman method, annealed them under a cadmium overpressure (PCd = 10² - 10⁵ Pa) at 800-1100 K, and investigated their electrical properties at high- and low-temperature. The influence of impurities on the crystals' electrical properties were analyzed using the defect subsystem model; the model includes the possibility of the formation of point intrinsic defects (V²⁻Cd, Cd²⁺i, V²⁺Te, Te²⁻i), and substitutional ones (Br⁰Te, Br⁺Te), as well as complexes of point defects, i.e., (Br⁺Te V²⁻Cd)⁻ and (2Br⁺Te V²⁻Cd)⁰. We established the concentration dependence between free charge carriers and themore » parameters of the annealing process. Here, n(T) and n(PCd) are determined by two dominant defects – Br⁺Te and (2Br⁺Te V²⁻Cd)⁰. Their content varies with the annealing temperature and the vapor pressure of the component; the concentration of other defects is much smaller and almost does not affect the electron density.« less

  14. Solidification microstructures in single-crystal stainless steel melt pools

    SciTech Connect

    Sipf, J.B.; Boatner, L.A.; David, S.A.

    1994-03-01

    Development of microstructure of stationary melt pools of oriented stainless steel single crystals (70%Fe-15%Ni-15%Cr was analyzed. Stationary melt pools were formed by electron-beam and gas-tungsten-arc heating on (001), (011), and (111) oriented planes of the austenitic, fcc-alloy crystals. Characterization and analysis of resulting microstructure was carried out for each crystallographic plane and welding method. Results showed that crystallography which favors ``easy growth`` along the <100> family of directions is a controlling factor in the microstructural formation along with the melt-pool shape. The microstructure was found to depend on the melting method, since each method forms a unique melt-pool shape. These results are used in making a three-dimensional reconstruction of the microstructure for each plane and melting method employed. This investigation also suggests avenues for future research into the microstructural properties of electron-beam welds as well as providing an experimental basis for mathematical models for the prediction of solidification microstructures.

  15. Compensation mechanism of bromine dopants in cadmium telluride single crystals

    SciTech Connect

    Bolotnikov, A. E.; Fochuk, P. M.; Verzhak, Ye. V.; Parashchuk, T. O.; Freik, D. M.; Panchuk, O. E.; James, R. B.; Gorichok, I. V.

    2015-01-02

    We grew single crystals of cadmium telluride, doped with bromine by the Bridgman method, annealed them under a cadmium overpressure (PCd = 10² - 10⁵ Pa) at 800-1100 K, and investigated their electrical properties at high- and low-temperature. The influence of impurities on the crystals' electrical properties were analyzed using the defect subsystem model; the model includes the possibility of the formation of point intrinsic defects (V²⁻Cd, Cd²⁺i, V²⁺Te, Te²⁻i), and substitutional ones (Br⁰Te, Br⁺Te), as well as complexes of point defects, i.e., (Br⁺Te V²⁻Cd)⁻ and (2Br⁺Te V²⁻Cd)⁰. We established the concentration dependence between free charge carriers and the parameters of the annealing process. Here, n(T) and n(PCd) are determined by two dominant defects – Br⁺Te and (2Br⁺Te V²⁻Cd)⁰. Their content varies with the annealing temperature and the vapor pressure of the component; the concentration of other defects is much smaller and almost does not affect the electron density.

  16. Analysis of Phase Separation in Czochralski Grown Single Crystal Ilmenite

    NASA Technical Reports Server (NTRS)

    Wilkins, R.; Powell, Kirk St. A.; Loregnard, Kieron R.; Lin, Sy-Chyi; Muthusami, Jayakumar; Zhou, Feng; Pandey, R. K.; Brown, Geoff; Hawley, M. E.

    1998-01-01

    Ilmenite (FeTiOs) is a wide bandgap semiconductor with an energy gap of 2.58 eV. Ilmenite has properties suited for radiation tolerant applications, as well as a variety of other electronic applications. Single crystal ilmenite has been grown from the melt using the Czochralski method. Growth conditions have a profound effect on the microstructure of the samples. Here we present data from a variety of analytical techniques which indicate that some grown crystals exhibit distinct phase separation during growth. This phase separation is apparent for both post-growth annealed and unannealed samples. Under optical microscopy, there appear two distinct areas forming a matrix with an array of dots on order of 5 pm diameter. While appearing bright in the optical micrograph, atomic force microscope (AFM) shows the dots to be shallow pits on the surface. Magnetic force microscope (MFM) shows the dots to be magnetic. Phase identification via electron microprobe analysis (EMPA) indicates two major phases in the unannealed samples and four in the annealed samples, where the dots appear to be almost pure iron. This is consistent with micrographs taken with a scanning probe microscope used in the magnetic force mode. Samples that do not exhibit the phase separation have little or no discernible magnetic structure detectable by the MFM.

  17. Type-I superconductivity in KBi2 single crystals

    NASA Astrophysics Data System (ADS)

    Sun, Shanshan; Liu, Kai; Lei, Hechang

    2016-03-01

    We report on the detailed transport, magnetic, thermodynamic properties and theoretical calculation of KBi2 single crystals in superconducting and normal states. KBi2 exhibits metallic behavior at a normal state and enters the superconducting state below {{T}\\text{c}}=3.573 K. Moreover, KBi2 exhibits low critical fields in all measurements, field-induced crossover from second- to first-order phase transition in specific heat measurements, the typical magnetization isotherms of type-I superconductors, and a small Ginzburg-Landau parameter {κ\\text{GL}}=0.611 . These results clearly indicate that KBi2 is a type-I superconductor with a thermodynamic critical field {{H}\\text{c}}=234.3(3) Oe.

  18. Super-thin single crystal diamond membrane radiation detectors

    SciTech Connect

    Pomorski, Michal; Caylar, Benoit; Bergonzo, Philippe

    2013-09-09

    We propose to use the non-electronic grade (nitrogen content 5 ppb < [N] < 5 ppm) single crystal (sc) chemical vapour deposited (CVD) diamond as a thin-membrane radiation detector. Using deep Ar/O{sub 2} plasma etching it is possible to produce self-supported few micrometres thick scCVD membranes of a size approaching 7 mm × 7 mm, with a very good surface quality. After metallization and contacting, electrical properties of diamond membrane detectors were probed with 5.486 MeV α-particles as an ionization source. Despite nitrogen impurity, scCVD membrane detectors exhibit stable operation, charge collection efficiency close to 100%, with homogenous response, and extraordinary dielectric strength up to 30 V/μm.

  19. Nanoscale anisotropic plastic deformation in single crystal GaN.

    PubMed

    Huang, Jun; Xu, Ke; Fan, Ying Min; Niu, Mu Tong; Zeng, Xiong Hui; Wang, Jian Feng; Yang, Hui

    2012-01-01

    Elasto-plastic mechanical deformation behaviors of c-plane (0001) and nonpolar GaN single crystals are studied using nanoindentation, cathodoluminescence, and transmission electron microscopy. Nanoindentation tests show that c-plane GaN is less susceptible to plastic deformation and has higher hardness and Young's modulus than the nonpolar GaN. Cathodoluminescence and transmission electron microscopy characterizations of indent-induced plastic deformation reveal that there are two primary slip systems for the c-plane GaN, while there is only one most favorable slip system for the nonplane GaN. We suggest that the anisotropic elasto-plastic mechanical properties of GaN are relative to its anisotropic plastic deformation behavior.PACS: 62.20.fq; 81.05.Ea; 61.72.Lk.

  20. Type-I superconductivity in KBi₂ single crystals.

    PubMed

    Sun, Shanshan; Liu, Kai; Lei, Hechang

    2016-03-01

    We report on the detailed transport, magnetic, thermodynamic properties and theoretical calculation of KBi2 single crystals in superconducting and normal states. KBi2 exhibits metallic behavior at a normal state and enters the superconducting state below T(c) = 3.573 K. Moreover, KBi2 exhibits low critical fields in all measurements, field-induced crossover from second- to first-order phase transition in specific heat measurements, the typical magnetization isotherms of type-I superconductors, and a small Ginzburg-Landau parameter κ(GL) = 0.611. These results clearly indicate that KBi2 is a type-I superconductor with a thermodynamic critical field H(c) = 234.3(3) Oe.

  1. Ultrathin aluminum sample cans for single crystal inelastic neutron scattering

    SciTech Connect

    Stone, Matthew B; Loguillo, Mark; Abernathy, Douglas L

    2011-01-01

    Single crystal inelastic neutron scattering measurements are often performed using a sample environment for controlling sample temperature. One difficulty associated with this is establishing appropriate thermal coupling from the sample to the temperature controlled portion of the sample environment. This is usually accomplished via a sample can which thermally couples the sample environment to the sample can and the sample can to the sample via an exchange gas. Unfortunately, this can will contribute additional background signal to ones measurement. We present here the design of an ultrathin aluminum sample can based upon established technology for producing aluminum beverage cans. This design minimizes parasitic sample can scattering. Neutron scattering measurements comparing a machined sample can to our beverage can design clearly indicate a large reduction in scattering intensity and texture when using the ultrathin sample can design. We also examine the possibility of using standard commercial beverage cans as sample cans.

  2. Ultrathin aluminum sample cans for single crystal inelastic neutron scattering

    NASA Astrophysics Data System (ADS)

    Stone, M. B.; Loguillo, M. J.; Abernathy, D. L.

    2011-05-01

    Single crystal inelastic neutron scattering measurements are often performed using a sample environment for controlling sample temperature. One difficulty associated with this is establishing appropriate thermal coupling from the sample to the temperature controlled portion of the sample environment. This is usually accomplished via a sample can which thermally couples the sample environment to the sample can and the sample can to the sample via an exchange gas. Unfortunately, this can will contribute additional background signal to one's measurement. We present here the design of an ultrathin aluminum sample can based upon established technology for producing aluminum beverage cans. This design minimizes parasitic sample can scattering. Neutron scattering measurements comparing a machined sample can to our beverage can design clearly indicate a large reduction in scattering intensity and texture when using the ultrathin sample can design. We also examine the possibility of using standard commercial beverage cans as sample cans.

  3. Toward Optimum Scale and TBC Adhesion on Single Crystal Superalloys

    NASA Technical Reports Server (NTRS)

    Smialek, James L.

    1998-01-01

    Single crystal superalloys exhibit excellent cyclic oxidation resistance if their sulfur content is reduced from typical impurity levels of approximately 5 ppmw to below 0.5 ppmw. Excellent alumina scale adhesion was documented for PWA 1480 and PWA 1484 without yttrium additions. Hydrogen annealing produced effective desulfurization of PWA 1480 to less than 0.2 ppmw and was also used to achieve controlled intermediate levels. The direct relationship between cyclic oxidation behavior and sulfur content was shown. An adhesion criterion was proposed based on the total amount of sulfur available for interfacial segregation, e.g., less than or equal to 0.2 ppmw S will maximize adhesion for a 1 mm thick sample. PWA 1484, melt desulfurized to 0.3 ppmw S, also exhibited excellent cyclic oxidation resistance and encouraging TBC lives (10 mils of 8YSZ, plasma sprayed without a bond coat) in 1100 C cyclic oxidation tests.

  4. Large electrocaloric effects in single-crystal ammonium sulfate.

    PubMed

    Crossley, S; Li, W; Moya, X; Mathur, N D

    2016-08-13

    Electrocaloric (EC) effects are typically studied near phase transitions in ceramic and polymer materials. Here, we investigate EC effects in an inorganic salt, namely ammonium sulfate (NH4)2SO4, with an order-disorder transition whose onset occurs at 223 K on cooling. For a single crystal thinned to 50 μm, we use a Maxwell relation to find a large isothermal entropy change of 30 J K(-1) kg(-1) in response to a field change of 400 kV cm(-1) The Clausius-Clapeyron equation implies a corresponding adiabatic temperature change of 4.5 K.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'. PMID:27402930

  5. Photoinduced surface voltage mapping study for large perovskite single crystals

    NASA Astrophysics Data System (ADS)

    Liu, Xiaojing; Liu, Yucheng; Gao, Fei; Yang, Zhou; Liu, Shengzhong Frank

    2016-05-01

    Using a series of illumination sources, including white light (tungsten-halogen lamp), 445-nm, 532-nm, 635-nm, and 730-nm lasers, the surface photovoltage (SPV) images were mapped for centimeter-sized CH3NH3PbX3 (X = Cl, Br, I) perovskite single crystals using Kelvin probe force microscopy. The significant SPV signals were observed to be wavelength-dependent. We attribute the appreciable SPV to the built-in electric field in the space charge region. This study shines light into the understanding of photoinduced charge generation and separation processes at nanoscale to help advance the development of perovskite solar cells, optoelectronics, laser, photodetector, and light-emitting diode (LED).

  6. InPBi Single Crystals Grown by Molecular Beam Epitaxy

    NASA Astrophysics Data System (ADS)

    Wang, K.; Gu, Y.; Zhou, H. F.; Zhang, L. Y.; Kang, C. Z.; Wu, M. J.; Pan, W. W.; Lu, P. F.; Gong, Q.; Wang, S. M.

    2014-06-01

    InPBi was predicted to be the most robust infrared optoelectronic material but also the most difficult to synthesize within In-VBi (V = P, As and Sb) 25 years ago. We report the first successful growth of InPBi single crystals with Bi concentration far beyond the doping level by gas source molecular beam epitaxy. The InPBi thin films reveal excellent surface, structural and optical qualities making it a promising new III-V compound family member for heterostructures. The Bi concentration is found to be 2.4 +/- 0.4% with 94 +/- 5% Bi atoms at substitutional sites. Optical absorption indicates a band gap of 1.23 eV at room temperature while photoluminescence shows unexpectedly strong and broad light emission at 1.4-2.7 μm which can't be explained by the existing theory.

  7. Electrical conduction in nanodomains in congruent lithium tantalate single crystal

    SciTech Connect

    Cho, Yasuo

    2014-01-27

    The electrical current flow behavior was investigated for nanodomains formed in a thin congruent lithium tantalate (LiTaO{sub 3}) single-crystal plate. When the nanodomains were relatively large, with diameters of about 100 nm, current flow was detected along the domain wall. However, when they were about 40 nm or smaller, the current flowed through the entire nanodomain. Schottky-like rectifying behavior was observed. Unlike the case of LiNbO{sub 3}, optical illumination was not required for current conduction in LiTaO{sub 3}. A clear temperature dependence of the current was found indicating that the conduction mechanism for nanodomains in LiTaO{sub 3} may involve thermally activated carrier hopping.

  8. Friction and deformation behavior of single-crystal silicon carbide

    NASA Technical Reports Server (NTRS)

    Miyoshi, K.; Buckley, D. H.

    1977-01-01

    Friction and deformation studies were conducted with single-crystal silicon carbide in sliding contact with diamond. When the radius of curvature of the spherical diamond rider was large (0.3), deformation of silicon carbide was primarily elastic. Under these conditions the friction coefficient was low and did not show a dependence on the silicon carbide orientation. Further, there was no detectable cracking of the silicon carbide surfaces. When smaller radii of curvature of the spherical diamond riders (0.15 and 0.02 mm) or a conical diamond rider was used, plastic grooving occured and the silicon carbide exhibited anisotropic friction and deformation behavior. Under these conditions the friction coefficient depended on load. Anisotropic friction and deformation of the basal plane of silicon carbide was controlled by the slip system. 10101120and cleavage of1010.

  9. Analysis of microstructural development in single crystal welds

    SciTech Connect

    Rappaz, M.; David, S.A.; Vitek, J.M.; Boatner, L.A.

    1989-01-01

    A detailed analysis of the dendritic microstructure produced in autogenously welded single crystals Fe-15Ni-15Cr has been performed in order to investigate the relationship between growth crystallography and solidification behavior. From a geometrical analysis relating the dendrite growth velocities to the weld velocity, it has been shown that, at a given point of the melt pool surface, selection of the preferred dendrite trunk growth direction occurs according to a minimum velocity (i.e., minimum undercooling) criterion. Knowing the growth rate of the selected dendrite orientation, the dendrite tip radius and the dendrite trunk spacing have been computed using recent theories of rapid solidification of ternary systems. The predicted dendrite growth orientation and spacing have been successfully compared to experimental observations made on electron beam and laser welds, thus clearly demonstrating the effect of crystallography on the microstructural development during weld pool solidification. 13 refs., 6 figs.

  10. Slow crack growth in single-crystal silicon.

    PubMed

    Connally, J A; Brown, S B

    1992-06-12

    Time-dependent crack growth has been measured on a precracked, single-crystal silicon cantilever beam 75 micrometers long that was excited at resonance. Growth of the precrack changes the resonant frequency of the beam, which is correlated to crack length. The measured steady-state crack growth rate was as slow as 2.9 x 10(-13) meter per second, although the apparatus can measure crack growth rates as low as 10(-15) meter per second. It is postulated that static fatigue of the native surface silica layer is the mechanism for crack growth. These experiments demonstrate the possibility of rate-dependent failure of silicon devices and the applicability of linear elastic fracture mechanics to small-scale micromechanical devices. The results indicate that slow crack growth must therefore be considered when evaluating the reliability of thin-film silicon structures.

  11. Path to meter class single crystal silicon (SCSi) space optics

    NASA Astrophysics Data System (ADS)

    McCarter, Douglas R.

    2012-03-01

    With the global financial crisis affecting funding for space systems development, customers are calling for lower cost systems. Yet, at the same time, these lower cost systems must have increased thermal response to operational environments and load survivability. We submit that single crystal silicon (SCSi) meets both of these requirements. This paper will highlight some key SCSi material properties, discuss the opportunities that led to the development of McCarter processing methods, and present the latest steps in the manufacturing path of McCarter Mirrors using SCSi, GFB (glass frit bonding) and MSF (McCarter super finish), including the concept drawing of a one meter SCSi lightweight mirror, which together sets up the last step toward a lower cost, high performing one meter SCSi space optic.

  12. Magnetic excitations in single crystal PrNiSn

    NASA Astrophysics Data System (ADS)

    Beirne, E. D.; McEwen, K. A.; Habicht, K.; Fort, D.

    Inelastic neutron scattering results from a single crystal of the rare earth intermetallic PrNiSn are presented. Crystalline electric field excitations are found at 0.5, 2.4 and around 3.5 meV. The lower modes show little dispersion over q, but the 3.5 meV splits into two excitations, most clearly seen along the c* direction. Fitting the modes with gaussian functions allows us to show the pronounced dispersion to be of the form E(q)=E0+J1cos(qπ) for the upper mode, and E(q)=E0+J1cos(qπ)+J2cos(2qπ) for the lower mode. This suggests a longer range interaction for the lower mode. The lowest excitation at 0.5 meV confirms predictions made from previous measurements on polycrystalline samples that indicate a low lying CEF level.

  13. Single crystal piezoelectric composites for advanced NDT ultrasound

    NASA Astrophysics Data System (ADS)

    Jiang, Xiaoning; Snook, Kevin; Hackenberger, Wesley S.; Geng, Xuecang

    2007-04-01

    In this paper, the design, fabrication and characterization of PMN-PT single crystal/epoxy composites are reported for NDT ultrasound transducers. Specifically, 1-3 PMN-PT/epoxy composites with center frequencies of 5 MHz - 40 MHz were designed and fabricated using either the dice-and-fill method or a photolithography based micromachining process. The measured electromechanical coefficients for composites with frequency of 5 MHz - 15 MHz were about 0.78-0.83, and the coupling coefficients for composites with frequencies of 25 MHz- 40 MHz were about 0.71-0.72. The dielectric loss remains low (< 0.05). These properties hold promise for advanced NDT ultrasound applications.

  14. Magnetomechanical properties of single crystal Terfenol-D

    SciTech Connect

    Busbridge, S.C.; Meng, L.Q.; Wu, G.H.; Wang, B.W.; Li, Y.X.; Gao, S.X.; Cai, C.; Zhan, W.S.

    1999-09-01

    Quasi-static and dynamic magnetomechanical measurements have been made on a twin-free <111> oriented single crystal of Tb{sub 0.27}Dy{sub 0.73}Fe{sub 2} (Terfenol-D). Unusually large values of dynamic strain coefficient, d{sub 33}, and magnetomechanical coupling coefficient, k{sub 33}, of 19.1 nm A{sup {minus}1} and 0.83 respectively were recorded with an oscillating field of amplitude 500 A m{sup {minus}1}rms at room temperature. The static magnetostriction saturated at 1688 x 10{sup {minus}6}, however, 90% of this strain was achieved with a field of 45 kA m{sup {minus}1}. The strain versus magnetization curves exhibit unusually linear regions, allowing confirmation that 71{degree} domain wall motion is primarily responsible for the high coupling coefficient of this material.

  15. Hard x-ray single crystal bi-mirror.

    PubMed

    Lyubomirskiy, M; Snigireva, I; Kuznetsov, S; Yunkin, V; Snigirev, A

    2015-05-15

    We report a novel hard x-ray interferometer consisting of two parallel channels manufactured in a single Si crystal by means of microfabrication technology. The sidewall surfaces of the channels, similar to mirrors, scatter at very small incident angles, acting equivalently to narrow micrometer size slits as in the Young double-slit interferometer. Experimental tests of the interferometer were performed at the ESRF ID06 beamline in the energy range from 12 to 16 keV. The interference patterns at different grazing incidence angles were recorded in the near- and far-field. Evaluation of the influence of the channel surface roughness on the visibility of interference fringes was performed. The proposed interferometer design allows the arrangement of mirrors at different split distances.

  16. Dislocation nucleation in bcc Ta single crystals studied by nanoindentation

    SciTech Connect

    Biener, M M; Biener, J; Hodge, A M; Hamza, A V

    2007-08-08

    The study of dislocation nucleation in closed-packed metals by nanoindentation has recently attracted much interest. Here, we address the peculiarities of the incipient plasticity in body centered cubic (bcc) metals using low index Ta single-crystals as a model system. The combination of nanoindentation with high-resolution atomic force microscopy provides us with experimental atomic-scale information on the process of dislocation nucleation and multiplication. Our results reveal a unique deformation behavior of bcc Ta at the onset of plasticity which is distinctly different from that of closed-packed metals. Most noticeable, we observe only one rather than a sequence of discontinuities in the load-displacement curves. This and other differences are discussed in context of the characteristic plastic deformation behavior of bcc metals.

  17. Shock compression experiments on Lithium Deuteride single crystals.

    SciTech Connect

    Knudson, Marcus D.; Desjarlais, Michael Paul; Lemke, Raymond W.

    2014-10-01

    S hock compression exper iments in the few hundred GPa (multi - Mabr) regime were performed on Lithium Deuteride (LiD) single crystals . This study utilized the high velocity flyer plate capability of the Sandia Z Machine to perform impact experiments at flyer plate velocities in the range of 17 - 32 km/s. Measurements included pressure, density, and temperature between %7E200 - 600 GPa along the Principal Hugoniot - the locus of end states achievable through compression by large amplitude shock waves - as well as pressure and density of re - shock states up to %7E900 GPa . The experimental measurements are compared with recent density functional theory calculations as well as a new tabular equation of state developed at Los Alamos National Labs.

  18. Low temperature properties of pnictide CrAs single crystal

    NASA Astrophysics Data System (ADS)

    Wu, Wei; Zhang, Xiaodong; Yin, Zhihua; Zheng, Ping; Wang, Nanlin; Luo, Jianlin

    2010-07-01

    High quality single crystal CrAs was grown by Sn flux method. The results of magnetic susceptibility and electrical resistivity are reported in a temperature range of 2 to 800 K. At low temperatures, a T 2 dependence of resistivity is observed showing a Fermi-liquid behavior. The Kadowaki-Woods ratio is found to be 1×10-5 μΩ cm mol2 K2 mJ-2, which fits well to the universal value for many correlated electron systems. At about 270 K, a clear magnetic transition is observed with sharp changes of resistivity and susceptibility. Above 270 K, a linear-temperature dependence of the magnetic susceptibility is observed up to 700 K, which resembles the T-dependent magnetic susceptibility of parents of iron-pnictides superconductors.

  19. Analysis of ripple formation in single crystal spot welds

    NASA Technical Reports Server (NTRS)

    Rappaz, M.; Corrigan, D.; Boatner, L. A.

    1997-01-01

    Stationary spot welds have been made at the (001) surface of Fe-l5%Ni-15%Cr single crystals using a Gas Tungsten Arc (GTA). On the top surface of the spot welds, very regular and concentric ripples were observed after solidification by differential interference color microscopy. Their height (typically 1--5 micrometers and spacing, typically approximately 60 micrometers) decreased with the radius of the pool. These ripples were successfully accounted for in terms of capillary-wave theory using the fundamental mode frequency f(sub 0) given by the first zero of the zero-order Bessel function. The spacing d between the ripples was then equated to v(sub s)/f(sub 0), where v(sub s) is the solidification rate. From the measured ripple spacing, the velocity of the pool was deduced as a function of the radius, and this velocity was in good agreement with the results of a heat-flow simulation.

  20. Growth of single-crystal YAG fiber optics.

    PubMed

    Nie, Craig D; Bera, Subhabrata; Harrington, James A

    2016-07-11

    Single-crystal YAG (Y3Al5O12) fibers have been grown by the laser heated pedestal growth technique with losses as low as 0.3 dB/m at 1.06 μm. These YAG fibers are as long as about 60 cm with diameters around 330 μm. The early fibers were grown from unoriented YAG seed fibers and these fibers exhibited facet steps or ridges on the surface of the fiber. However, recently we have grown fibers using an oriented seed to grow step-free fibers. Scattering losses made on the fibers indicate that the scattering losses are equal to about 30% of the total loss.

  1. Large electrocaloric effects in single-crystal ammonium sulfate.

    PubMed

    Crossley, S; Li, W; Moya, X; Mathur, N D

    2016-08-13

    Electrocaloric (EC) effects are typically studied near phase transitions in ceramic and polymer materials. Here, we investigate EC effects in an inorganic salt, namely ammonium sulfate (NH4)2SO4, with an order-disorder transition whose onset occurs at 223 K on cooling. For a single crystal thinned to 50 μm, we use a Maxwell relation to find a large isothermal entropy change of 30 J K(-1) kg(-1) in response to a field change of 400 kV cm(-1) The Clausius-Clapeyron equation implies a corresponding adiabatic temperature change of 4.5 K.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'.

  2. InPBi Single Crystals Grown by Molecular Beam Epitaxy

    PubMed Central

    Wang, K.; Gu, Y.; Zhou, H. F.; Zhang, L. Y.; Kang, C. Z.; Wu, M. J.; Pan, W. W.; Lu, P. F.; Gong, Q.; Wang, S. M.

    2014-01-01

    InPBi was predicted to be the most robust infrared optoelectronic material but also the most difficult to synthesize within In-VBi (V = P, As and Sb) 25 years ago. We report the first successful growth of InPBi single crystals with Bi concentration far beyond the doping level by gas source molecular beam epitaxy. The InPBi thin films reveal excellent surface, structural and optical qualities making it a promising new III–V compound family member for heterostructures. The Bi concentration is found to be 2.4 ± 0.4% with 94 ± 5% Bi atoms at substitutional sites. Optical absorption indicates a band gap of 1.23 eV at room temperature while photoluminescence shows unexpectedly strong and broad light emission at 1.4–2.7 μm which can't be explained by the existing theory. PMID:24965260

  3. Single crystal metal wedges for surface acoustic wave propagation

    DOEpatents

    Fisher, E.S.

    1980-05-09

    An ultrasonic testing device has been developed to evaluate flaws and inhomogeneities in the near-surface region of a test material. A metal single crystal wedge is used to generate high frequency Rayleigh surface waves in the test material surface by conversion of a slow velocity, bulk acoustic mode in the wedge into a Rayleigh wave at the metal-wedge test material interface. Particular classes of metals have been found to provide the bulk acoustic modes necessary for production of a surface wave with extremely high frequency and angular collimation. The high frequency allows flaws and inhomogeneities to be examined with greater resolution. The high degree of angular collimation for the outgoing ultrasonic beam permits precision angular location of flaws and inhomogeneities in the test material surface.

  4. Single crystal metal wedges for surface acoustic wave propagation

    DOEpatents

    Fisher, Edward S.

    1982-01-01

    An ultrasonic testing device has been developed to evaluate flaws and inhomogeneities in the near-surface region of a test material. A metal single crystal wedge is used to generate high frequency Rayleigh surface waves in the test material surface by conversion of a slow velocity, bulk acoustic mode in the wedge into a Rayleigh wave at the metal-wedge test material interface. Particular classes of metals have been found to provide the bulk acoustic modes necessary for production of a surface wave with extremely high frequency and angular collimation. The high frequency allows flaws and inhomogeneities to be examined with greater resolution. The high degree of angular collimation for the outgoing ultrasonic beam permits precision angular location of flaws and inhomogeneities in the test material surface.

  5. Two-photon absorption spectroscopy of rubrene single crystals

    NASA Astrophysics Data System (ADS)

    Irkhin, Pavel; Biaggio, Ivan

    2014-05-01

    We determine the wavelength dependence of the two-photon absorption cross section in rubrene single crystals both by direct measurement of nonlinear transmission and from the two-photon excitation spectrum of the photoluminescence. The peak two-photon absorption coefficient for b-polarized light was found to be (4.6±1)×10-11 m/W at a wavelength of 850±10 nm. It is 2.3 times larger for c-polarized light. The lowest energy two-photon excitation peak corresponds to an excited state energy of 2.92±0.04 eV and it is followed by a vibronic progression of higher energy peaks separated by ˜0.14 eV.

  6. Growth and characterization of nonlinear optical single crystal: Nicotinic L-tartaric

    NASA Astrophysics Data System (ADS)

    Sheelarani, V.; Shanthi, J.

    2015-06-01

    Nonlinear optical single crystals were grown from Nicotinic and L-Tartaric acid by slow evaporation technique at room temperature. Structure of the grown crystal was confirmed by single crystal X-ray diffraction studies, The crystallinity of the Nicotinic L-Tartaric (NLT) crystals was confirmed from the powder XRD pattern. The transparent range and cut off wavelength of the grown crystal was studied by the UV-Vis spectroscopic analysis.The thermal stability of the crystal was studied by TG-DTA. The second harmonic generation (SHG) efficiency of NLT was confirmed by Kurtz Perry technique.

  7. Studies on synthesis, growth, structural, optical properties of organic 8-hydroxyquinolinium succinate single crystals

    SciTech Connect

    Thirumurugan, R. Anitha, K.

    2014-04-24

    8-hydroxyquinolinium succinate (8HQSU), an organic material has been synthesized and single crystals were grown by employing the technique of slow evaporation. The structure of the grown crystal was elucidated by using single crystal X-ray diffraction analysis. 8HQSU crystal belongs to the monoclinic crystallographic system with non-centro symmetric space group of P2{sub 1}. FT-IR spectral investigation has been carried out to identify the various functional groups present in the grown crystal. UV–vis spectral studies reveal that 8HQSU crystals are transparent in the entire visible region and the cut-off wavelength has been found to be 220nm.

  8. Growth and characterization of nonlinear optical single crystal: Nicotinic L-tartaric

    SciTech Connect

    Sheelarani, V.; Shanthi, J.

    2015-06-24

    Nonlinear optical single crystals were grown from Nicotinic and L-Tartaric acid by slow evaporation technique at room temperature. Structure of the grown crystal was confirmed by single crystal X-ray diffraction studies, The crystallinity of the Nicotinic L-Tartaric (NLT) crystals was confirmed from the powder XRD pattern. The transparent range and cut off wavelength of the grown crystal was studied by the UV–Vis spectroscopic analysis.The thermal stability of the crystal was studied by TG-DTA. The second harmonic generation (SHG) efficiency of NLT was confirmed by Kurtz Perry technique.

  9. Process development for single-crystal silicon solar cells

    NASA Astrophysics Data System (ADS)

    Bohra, Mihir H.

    Solar energy is a viable, rapidly growing and an important renewable alternative to other sources of energy generation because of its abundant supply and low manufacturing cost. Silicon still remains the major contributor for manufacturing solar cells accounting for 80% of the market share. Of this, single-crystal solar cells account for half of the share. Laboratory cells have demonstrated 25% efficiency; however, commercial cells have efficiencies of 16% - 20% resulting from a focus on implementation processes geared to rapid throughput and low cost, thereby reducing the energy pay-back time. An example would be the use of metal pastes which dissolve the dielectric during the firing process as opposed to lithographically defined contacts. With current trends of single-crystal silicon photovoltaic (PV) module prices down to 0.60/W, almost all other PV technologies are challenged to remain cost competitive. This presents a unique opportunity in revisiting the PV cell fabrication process and incorporating moderately more expensive IC process practices into PV manufacturing. While they may drive the cost toward a 1/W benchmark, there is substantial room to "experiment", leading to higher efficiencies which will help maintain the overall system cost. This work entails a turn-key process designed to provide a platform for rapid evaluation of novel materials and processes. A two-step lithographic process yielding a baseline 11% - 13% efficient cell is described. Results of three studies have shown improvements in solar cell output parameters due to the inclusion of a back-surface field implant, a higher emitter doping and also an additional RCA Clean.

  10. Single crystal diamond detectors grown by chemical vapor deposition

    NASA Astrophysics Data System (ADS)

    Tuvè, C.; Angelone, M.; Bellini, V.; Balducci, A.; Donato, M. G.; Faggio, G.; Marinelli, M.; Messina, G.; Milani, E.; Morgada, M. E.; Pillon, M.; Potenza, R.; Pucella, G.; Russo, G.; Santangelo, S.; Scoccia, M.; Sutera, C.; Tucciarone, A.; Verona-Rinati, G.

    2007-01-01

    The detection properties of heteropitaxial (polycrystalline, pCVD) and homoepitaxial (single crystal, scCVD) diamond films grown by microwave chemical vapor deposition (CVD) in the Laboratories of Roma "Tor Vergata" University are reported. The pCVD diamond detectors were tested with α-particles from different sources and 12C ions produced by 15 MV Tandem accelerator at Southern National Laboratories (LNS) in Catania (Italy). pCVDs were also used to monitor 14 MeV neutrons produced by the D-T plasma at Joint European Torus (JET), Culham, U.K. The limit of pCVDs is the poor energy resolution. To overcome this problem, we developed scCVD diamonds using the same reactor parameters that optimized pCVD diamonds. scCVD were grown on a low cost (1 0 0) HPHT single crystal substrate. A detector 110 μm thick was tested under α-particles and under 14 MeV neutron irradiation. The charge collection efficiency spectrum measured under irradiation with a triple α-particle source shows three clearly resolved peaks, with an energy resolution of about 1.1%. The measured spectra under neutron irradiation show a well separated C(n,α0)9Be12 reaction peak with an energy spread of 0.5 MeV for 14.8 MeV neutrons and 0.3 MeV for 14.1 MeV neutrons, which are fully compatible with the energy spread of the incident neutron beams.

  11. Inelastic neutron scattering from single crystal Zn under high pressure

    NASA Astrophysics Data System (ADS)

    Morgan, J. G.; von Dreele, R. B.; Wochner, P.; Shapiro, S. M.

    1996-07-01

    Inelastic neutron-scattering experiments have been performed for single crystals of Zn under pressures up to 8.8 GPa at 300 K. The phonon modes q/qmax=ξ=0.075 and ξ=0.10 were measured in the transverse acoustic branch Σ3, where q=0 corresponds with the elastic constant C44. The phonon energy showed a substantial hardening with increasing pressure. The experimental data below 6.8 GPa for ξ=0.075 yield a constant Grüneisen mode γi=-lnωi/lnV of 2.25 in good agreement with a previous calculation [H. Ledbetter, Phys. Status Solidi B 181, 81 (1994)]. Above 6.8 GPa, there is a very rapid increase of γi which is indicative of the presence of a giant Kohn anomaly. This rapid divergence at high pressure indicates that a phonon softening may occur at pressures higher than 8.8 GPa caused by the collapse of the giant Kohn anomaly via an electronic topological transition (ETT). In an earlier Mössbauer Zn study at 4 K [W. Potzel et al., Phys. Rev. Lett. 74, 1139 (1994)], a drastic drop of the Lamb-Mössbauer factor was observed at 6.6 GPa, which was interpreted as being due to phonon softening, indicating this ETT had occurred. This paper also compares the compressibility data for single crystal Zn and Zn powder using neutron scattering. The results were found to be similar to an earlier x-ray Zn powder experiment [O. Schulte et al., High Pressure Res. 6, 169 (1991)].

  12. Shock-induced optical emission from yttria-doped cubic zircon single crystal: crystal orientation effects

    NASA Astrophysics Data System (ADS)

    Cao, Xiuxia; Zhou, Xianming; Meng, Chuanmin

    2015-06-01

    The shock-induced optical emission from yttria (Y2O3) -doped cubic zircon single crystal (< 100 > and < 110 > crystal orientations) under the pressure range from 30 to 52 GPa was measured by the time-resolved 40-channel optical pyrometer at discrete wavelengths ranging from 400 to 800 nm. Clear periodic fluctuation was observed in spectral radiance history of < 110 > ZrO2, while a noise fluctuation was found in < 100 > ZrO2. The gray-body function was used to fit the spectral radiance histories. We found that the obtained apparent temperature varied slightly with time, but the emissivity history showed a fluctuate increase with time. Moreover, all the temperature data were independent of shock stress and were well above the calculated Lindeman melting temperature. Present result suggests that the optical emission relates to the shock-induced local hot spots, and its crystal orientation effect is attributed to the different dynamic deformation response between < 100 > and < 110 > ZrO2.

  13. Method for the preparation of inorganic single crystal and polycrystalline electronic materials

    NASA Technical Reports Server (NTRS)

    Groves, W. O. (Inventor)

    1969-01-01

    Large area, semiconductor crystals selected from group 3-5 compounds and alloys are provided for semiconductor device fabrication by the use of a selective etching operation which completely removes the substrate on which the desired crystal was deposited. The substrate, selected from the same group as the single crystal, has a higher solution rate than the epitaxial single crystal which is essentially unaffected by the etching solution. The preparation of gallium phosphide single crystals using a gallium arsenide substrate and a concentrated nitric acid etching solution is described.

  14. Single crystal growth and X-ray structure analysis of non-peripheral octahexyl phthalocyanine

    NASA Astrophysics Data System (ADS)

    Ohmori, Masashi; Nakano, Chika; Higashi, Takuya; Miyano, Tetsuya; Tohnai, Norimitsu; Fujii, Akihiko; Ozaki, Masanori

    2016-07-01

    The single-crystal structure of metal-free non-peripheral octahexyl-substituted phthalocyanine (C6PcH2) has been investigated by single-crystal X-ray structure analysis. Two types of C6PcH2 single crystal, bulk and needle crystals, were separately grown by controlling the recrystallization conditions. The structures of the two types of crystal were determined, and were found to be completely different, that is, C6PcH2 exhibits structural polymorphism. It has been clarified that the C6PcH2 microcrystals in thin films used in previously reported electronic devices have the needle structure.

  15. Growth, morphological, mechanical and dielectric studies of semi organic NLO single crystal: L-argininium perchlorate

    NASA Astrophysics Data System (ADS)

    Aruna, S.; Bhagavannarayana, G.; Palanisamy, M.; Thomas, Preema C.; Varghese, Babu; Sagayaraj, P.

    2007-03-01

    Optically good quality single crystal of L-argininium perchlorate (abbreviated as LARPCL), a promising analog of LAP was successfully grown by slow solvent evaporation technique at room temperature. The unit cell parameters and the morphology of LARPCL single crystals were determined by single crystal XRD. The Vickers microhardness measurements were carried out on the grown crystals to estimate the mechanical properties. The dielectric constant and dielectric loss of the crystal were measured as a function of frequency and temperature, and the results are discussed.

  16. Initial characterization of partially stabilized HfO/sub 2/ single crystals

    SciTech Connect

    Ingel, R.P.; Lewis, D.; Bender, B.A.; Rice, R.W.

    1982-09-01

    Results are presented for initial characterization of physical properties, microstructure, and phase structure of partially stabilized HfO/sub 2/ single crystals. These results, for crystals prepared by skull melting, are compared with those for ZrO/sub 2/ single crystals of similar composition and for fully stabilized ZrO/sub 2/ and HfO/sub 2/ single crystals. The observed microstructures and mechanical properties suggest that partially stabilized HfO/sub 2/ crystals may be useful high temperature structural ceramics.

  17. Growth and microtopographic study of CuInSe2 single crystals

    NASA Astrophysics Data System (ADS)

    Chauhan, Sanjaysinh M.; Chaki, Sunil; Tailor, J. P.; Deshpande, M. P.

    2016-05-01

    The CuInSe2 single crystals were grown by chemical vapour transport (CVT) technique using iodine as transporting agent. The elemental composition of the as-grown CuInSe2 single crystals was determined by energy dispersive analysis of X-ray (EDAX). The unit cell crystal structure and lattice parameters were determined by X-ray diffraction (XRD) technique. The surface microtopographic study of the as-grown CuInSe2 single crystals surfaces were done to study the defects, growth mechanism, etc. of the CVT grown crystals.

  18. Growth and characterization of WSe2 single crystals using TeCl4 as transport agent

    NASA Astrophysics Data System (ADS)

    Bougouma, Moussa; Nisol, Bernard; Doneux, Thomas; Guel, Boubié; Segato, Tiriana; Reniers, François; Delplancke-Ogletree, Marie-Paule; Legma, Jean B.; Buess-Herman, Claudine

    2016-11-01

    The growth of WSe2 single crystals, using TeCl4 as transport agent was performed successfully from slowly cooled polycrystalline powders as precursors. The resulting single crystals were characterized by X-ray diffraction (XRD) and their surfaces examined by scanning electron microscopy (SEM) presented fewer defects than single crystals prepared from air-quenched polycrystalline powders. Energy Dispersive X-ray microanalysis (EDX), inductively coupled plasma (ICP) spectroscopy and X-ray photoelectron spectroscopy (XPS) revealed that the single crystals are homogeneous and stoichiometric. Electrical conductivity and photocurrent measurements have confirmed the semiconducting character of the single crystals and a photocurrent of 75 mA cm-2 has been reached. In addition, single crystals with areas in the 25-100 mm2 range can be obtained under the reported growth conditions.

  19. Comparative study of intrinsic luminescence in undoped transparent ceramic and single crystal garnet scintillators

    NASA Astrophysics Data System (ADS)

    Fujimoto, Yutaka; Yanagida, Takayuki; Yagi, Hideki; Yanagidani, Takagimi; Chani, Valery

    2014-10-01

    Scintillation properties associated with intrinsic lattice defects of undoped Y3A5O12 (YAG) and Lu3A5O12 (LuAG) transparent ceramics and single crystals are compared. The ceramics excited with X-ray demonstrated relatively low emission intensity when compared with that of the single crystals. Decay times of the ceramics and the single crystals were similar. These parameters were approximately 430 ns (YAG ceramic), 460 ns (YAG single crystal), 30 ns and 1090 ns (LuAG ceramic), and 25 ns and 970 ns (LuAG single crystal). According to the pulse height spectra recorded under 137Cs gamma-ray irradiation, the scintillation light yield of the both ceramics were about 2950 ± 290 ph/MeV. However, the single crystals had greater kight yield of about about 14,300 ± 1430 ph/MeV for YAG and 8350 ± 830 ph/MeV for LuAG.

  20. Water weakening in experimentally deformed milky quartz single crystals

    NASA Astrophysics Data System (ADS)

    Stunitz, H.; Thust, A.; Kilian, R.; Heilbronner, R.; Behrens, H.; Tarantola, A.; Fitz Gerald, J. D.

    2015-12-01

    Natural single crystals of quartz have been experimentally deformed in two orientations: (1) normal to one prism-plane, (2) In O+ orientation at temperatures of 900 and 1000°C, pressures of 1.0 and 1.5 GPa, and strain rates of ~1 x 10-6s-1. The starting material is milky quartz, consisting of dry quartz (H2O contents of <150 H/106Si) with fluid inclusions (FI). During pressurization many FI´s decrepitate. Cracks heal and small neonate FI´s form, increasing the number of FI´s drastically. During subsequent deformation, the size of FI´s is further reduced (down to ~10 nm). Sample deformation occurs by dominant dislocation glide on selected slip systems, accompanied by some dynamic recovery. Strongly deformed regions show FTIR spectra with a pointed broad absorption band in the ~3400 cm-1 region as a superposition of molecular H2O bands and three discrete absorption bands (at 3367, 3400, and 3434 cm-1). In addition, there is a discrete absorption band at 3585 cm-1, which only occurs in deformed regions. The 3585 cm-1 band is reduced or even disappears after annealing. This band is polarized and represents structurally bound H, its H-content is estimated to be 1-3% of the total H2O-content and appears to be associated with dislocations. The H2O weakening effect in our FI-bearing natural quartz crystals is assigned to the processes of dislocation generation and multiplication at small FI´s. The deformation processes in these crystals represent a recycling of H2O between FI´s, dislocation generation at very small fluid inclusions, incorporation of structurally bound H into dislocation cores, and release of H2O from dislocations back into FI´s during recovery. Cracking and crack healing play an important role in the recycling process and imply a close interrelationship between brittle and crystal plastic deformation. The H2O weakening by this process is of a disequilibrium nature and thus depends on the amount of H2O available.

  1. Structure of cleaved (001) USb2 single crystal

    SciTech Connect

    Chen, Shao-ping; Hawley, Marilyn; Bauer, Eric D; Stockum, Phil B; Manoharan, Hari C

    2009-01-01

    We have achieved what we believe to be the first atomic resolution STM images for a uranium compound taken at room temperature. The a, b, and c lattice parameters in the images confirm that the USb{sub 2} crystals cleave on the (001) basal plane as expected. The a and b dimensions were equal, with the atoms arranged in a cubic pattern. Our calculations indicate a symmetric cut between Sb planes to be the most favorable cleavage plane and U atoms to be responsible for most of the DOS measured by STM. Some strange features observed in the STM will be discussed in conjunction with ab initio calculations. The purpose of this work is to demonstrate the power of scanning tunneling microscopy (STM) techniques combined with a theoretical underpinning to determine the surface atomic structure and properties of actinide materials, such as the quasi 2-dimensional uranium dipnictide USb{sub 2} single crystal, thereby contributing to the understanding of their surface structural and electronic properties. The members of this interesting UX{sub 2} (X=P, As, Sb, Bi) series of compounds display dual localized and itinerant 5f electron behavior within the same compound due to the hybridization of the 5f orbitals with the conduction band. With the exception of UO{sub 2}, which has to be studied at elevated temperature to generate enough carriers for STM imaging, STM techniques have not been applied successfully to the characterization of the surface atomic structure of any other single crystal actinide compound, to the best of our knowledge. However, STM has been used to a limited extent for the study of some cerium compounds. STM probes electronic properties at the atomic level and can directly provide information about the local density of filled and empty states (LDOS) states simultaneously. A STM topograph provides the local atomic arrangement and spacing of the atoms on the surface, local defect structures (e.g. steps, vacancies, and kink sites) and the presence of contaminants

  2. Europium pyrimidine-4,6-dicarboxylate framework with a single-crystal-to-single-crystal transition and a reversible dehydration/rehydration process.

    PubMed

    Sun, Hao-Ling; Yin, Dan-Dan; Chen, Qi; Wang, Zhenqiang

    2013-04-01

    In this paper, a novel three-dimensional (3D) porous lanthanide-organic framework, Eu2(μ4-pmdc)2(OH)2·3H2O (1), which is stable up to 400 °C, has been hydrothermally synthesized and characterized. It shows intriguing single-crystal-to-single-crystal transformation and reversible dehydration/rehydration phenomenon upon removal and rebinding of the lattice water molecules, which is supported by single-crystal X-ray diffraction, powder X-ray diffraction, and photoluminescence data.

  3. Studies on crystal growth and physical properties of 4-(dimethylamino)benzaldehyde-2,4-dinitroaniline single crystal

    NASA Astrophysics Data System (ADS)

    Jebin, R. P.; Suthan, T.; Rajesh, N. P.; Vinitha, G.; Dhas, S. A. Britto

    2016-07-01

    The organic material 4-(dimethylamino)benzaldehyde-2,4-dinitroaniline has been grown by slow evaporation technique. Single crystal and Powder X-ray diffraction studies have been carried out to conform the grown crystal. FTIR and FT-Raman spectra were recorded to identify the functional groups present in the crystal. The optical property of the grown crystal was analysed by UV-Vis-NIR measurement. The thermal property of the grown crystal was analysed by thermogravimetric (TG) and differential thermal analyses (DTA). Thermal diffusivity of the grown crystal was analysed by Photo acoustic spectroscopic (PAS) studies. The third order nonlinear optical properties of 4-(dimethylamino)benzaldehyde-2,4-dinitroaniline was measured by the Z-scan technique using 532 nm diode pumped continuous wave (CW) Nd:YAG laser. The mechanical property of the grown crystal was analysed by using microhardness studies.

  4. An increase in hemoglobin, platelets and white blood cells levels by iron chelation as single treatment in multitransfused patients with myelodysplastic syndromes: clinical evidences and possible biological mechanisms.

    PubMed

    Breccia, Massimo; Voso, Maria Teresa; Aloe Spiriti, Maria Antonietta; Fenu, Susanna; Maurillo, Luca; Buccisano, Francesco; Tafuri, Agostino; Alimena, Giuliana

    2015-05-01

    Iron chelation therapy can improve hematopoiesis in myelodysplastic syndromes. Only few studies showed hematologic improvement with deferoxamine, and the erythroid responses were correlated with good compliance to long-term treatment. Indeed, single-case reports and data from clinical trials testing the efficacy of deferasirox reported hematologic improvements with varying rates of response in different lineages. Overall, about 760 myelodysplastic syndrome (MDS) patients with iron overload receiving deferasirox were included in six different studies, and an increase in hemoglobin level was reported to range from 6 to 44.5%, an increase in platelet count from 13 to 61%, and in neutrophil count from 3 to 76%. In all the published studies, hematologic improvements were not related to serum ferritin or to non-total binding iron changes; indeed, other pathways were indicated as possible pathogenetic mechanisms, such as decreased NF-kB activity, modulation of mTOR signalling, and reduced reactive oxygen species. The aims of this review are to provide all available information relating clinical and hematologic changes after chelation therapy and to discuss potential mechanisms involved in such responses.

  5. An increase in hemoglobin, platelets and white blood cells levels by iron chelation as single treatment in multitransfused patients with myelodysplastic syndromes: clinical evidences and possible biological mechanisms.

    PubMed

    Breccia, Massimo; Voso, Maria Teresa; Aloe Spiriti, Maria Antonietta; Fenu, Susanna; Maurillo, Luca; Buccisano, Francesco; Tafuri, Agostino; Alimena, Giuliana

    2015-05-01

    Iron chelation therapy can improve hematopoiesis in myelodysplastic syndromes. Only few studies showed hematologic improvement with deferoxamine, and the erythroid responses were correlated with good compliance to long-term treatment. Indeed, single-case reports and data from clinical trials testing the efficacy of deferasirox reported hematologic improvements with varying rates of response in different lineages. Overall, about 760 myelodysplastic syndrome (MDS) patients with iron overload receiving deferasirox were included in six different studies, and an increase in hemoglobin level was reported to range from 6 to 44.5%, an increase in platelet count from 13 to 61%, and in neutrophil count from 3 to 76%. In all the published studies, hematologic improvements were not related to serum ferritin or to non-total binding iron changes; indeed, other pathways were indicated as possible pathogenetic mechanisms, such as decreased NF-kB activity, modulation of mTOR signalling, and reduced reactive oxygen species. The aims of this review are to provide all available information relating clinical and hematologic changes after chelation therapy and to discuss potential mechanisms involved in such responses. PMID:25743685

  6. Growth and characterization of isotopically enriched [sup 70]Ge and [sup 74]Ge single crystals

    SciTech Connect

    Itoh, K.

    1992-10-01

    Isotopically enriched [sup 70]Ge and [sup 74]Ge single crystals were successfully gown by a newly developed vertical Bridgman method. The system allows us to reliably grow high purity Ge single crystals of approximately 1 cm[sup 3] volume. To our knowledge, we have grown the first [sup 70]Ge single crystal. The electrically active chemical impurity concentration for both crystals was found to be [approximately]2 [times] cm[sup [minus]3] which is two order of magnitude better that of [sup 74]Ge crystals previously grown by two different groups. Isotopic enrichment of the [sup 70]Ge and the [sup 74]Ge crystals is 96.3% and 96.8%, respectively. The residual chemical impurities present in both crystals were identified as phosphorus, copper, aluminum, and indium. A wide variety of experiments which take advantage of the isotopic purity of our crystals are discussed.

  7. Growth and characterization of isotopically enriched {sup 70}Ge and {sup 74}Ge single crystals

    SciTech Connect

    Itoh, K.

    1992-10-01

    Isotopically enriched {sup 70}Ge and {sup 74}Ge single crystals were successfully gown by a newly developed vertical Bridgman method. The system allows us to reliably grow high purity Ge single crystals of approximately 1 cm{sup 3} volume. To our knowledge, we have grown the first {sup 70}Ge single crystal. The electrically active chemical impurity concentration for both crystals was found to be {approximately}2 {times} cm{sup {minus}3} which is two order of magnitude better that of {sup 74}Ge crystals previously grown by two different groups. Isotopic enrichment of the {sup 70}Ge and the {sup 74}Ge crystals is 96.3% and 96.8%, respectively. The residual chemical impurities present in both crystals were identified as phosphorus, copper, aluminum, and indium. A wide variety of experiments which take advantage of the isotopic purity of our crystals are discussed.

  8. Investigation on crystalline perfection, mechanical, piezoelectric and ferroelectric properties of L-tartaric acid single crystal

    SciTech Connect

    Murugan, G. Senthil Ramasamy, P.

    2014-04-24

    Polar organic nonlinear optical material, L-tartaric acid single crystals have been grown from slow evaporation solution growth technique. Single crystal X-ray diffraction study indicates that the grown crystal crystallized in monoclinic system with space group P2{sub 1}. Crystalline perfection of the crystal has been evaluated by high resolution X-ray diffraction technique and it reveals that the crystal quality is good and free from structural grain boundaries. Mechanical stability of the crystal has been analyzed by Vickers microhardness measurement and it exhibits reverse indentation size effect. Piezoelectric d{sub 33} co-efficient for the crystal has been examined and its value is 47 pC/N. The ferroelectric behaviour of the crystal was analyzed by polarization-electric field hysteresis loop measurement.

  9. Structure and Morphology of PEO-b-PLLA Diblock Copolymer Single Crystal

    NASA Astrophysics Data System (ADS)

    Li, Lingyu

    2005-03-01

    Poly (L-lactide) (PLLA) is an important biodegradable synthetic polymer of interest for medical applications such as controlled drug delivery, resorbable sutures, medical implants, and scaffolds for tissue engineering. Combining PLLA with Poly (ethylene oxide) (PEO) to form a block copolymer PEO-b-PLLA has attracted the interests of material scientists because modifications of physical and chemical properties lead to an accelerated biodegradability. Generally, the rate of degradation strongly depends on the solid state structure of the material therefore clear understanding of crystallization behavior of PEO-b-PLLA is important. Crystallization of PEO-b-PLLA primarily depends on crystallization temperature (Tc). Solution cast thin film crystallization method was used to obtain the PEO-b-PLLA single crystals. At temperatures above Tm of PEO and below that of PLLA, PLLA crystallizes and forms lozenge-shaped single crystal .When cooled to room temperature, PEO begins to crystallize and form fractal-like single crystal on the top of already formed PLLA crystals. However, at temperatures below Tm of PEO, only the fractal-like PEO single crystals were observed. Structure and morphology of this novel single crystal was explored using TEM and AFM.

  10. Single crystal growth and enhancing effect of glycine on characteristic properties of bis-thiourea zinc acetate crystal

    NASA Astrophysics Data System (ADS)

    Anis, Mohd; Muley, G. G.

    2016-08-01

    A single crystal of glycine-doped bis-thiourea zinc acetate (G-BTZA) with a dimension of 15 × 6 × 4 mm3 has been grown using the slow solution evaporation technique. The structural parameters of the crystals were determined using the single crystal XRD technique. The increase in optical transparency of the doped BTZA crystal was ascertained in the range of 200 to 900 nm using UV-visible spectral analysis. The improved optical band gap of the G-BTZA crystal is found to be 4.19 eV, and vital optical constants have been calculated using the transmittance data. The influence of glycine on the mechanical parameters of the BTZA crystal has been investigated via microhardness studies. The thermal stability of pure and doped BTZA crystals has been determined by employing the thermogravimetric and differential thermal analysis technique. The improvement in the dielectric properties of the BTZA crystal after the addition of glycine has been evaluated in a temperature range of 30 to 120 °C at a frequency of 100 KHz. The SHG efficiency of the glycine-doped BTZA crystal is found to be much higher than KDP and BTZA crystal material in a Kurtz-Perry powder analysis.

  11. Single crystal growth and enhancing effect of glycine on characteristic properties of bis-thiourea zinc acetate crystal

    NASA Astrophysics Data System (ADS)

    Anis, Mohd; Muley, G. G.

    2016-08-01

    A single crystal of glycine-doped bis-thiourea zinc acetate (G-BTZA) with a dimension of 15 × 6 × 4 mm3 has been grown using the slow solution evaporation technique. The structural parameters of the crystals were determined using the single crystal XRD technique. The increase in optical transparency of the doped BTZA crystal was ascertained in the range of 200 to 900 nm using UV–visible spectral analysis. The improved optical band gap of the G-BTZA crystal is found to be 4.19 eV, and vital optical constants have been calculated using the transmittance data. The influence of glycine on the mechanical parameters of the BTZA crystal has been investigated via microhardness studies. The thermal stability of pure and doped BTZA crystals has been determined by employing the thermogravimetric and differential thermal analysis technique. The improvement in the dielectric properties of the BTZA crystal after the addition of glycine has been evaluated in a temperature range of 30 to 120 °C at a frequency of 100 KHz. The SHG efficiency of the glycine-doped BTZA crystal is found to be much higher than KDP and BTZA crystal material in a Kurtz–Perry powder analysis.

  12. Polymorphic single crystal {r_reversible} single crystal transition in K{sub 0.975}Rb{sub 0.025}NO{sub 3}

    SciTech Connect

    Asadov, Yu. G. Nasirov, E. V.

    2010-09-15

    Polymorphic transformations in K{sub 0.975}Rb{sub 0.025}NO{sub 3} single crystals have been investigated by optical microscopy and X-ray diffraction. The equilibrium temperature between modifications II and III has been determined. It is established that the crystal growth at II {r_reversible} III polymorphic transitions is accompanied by the formation and growth of daughter-modification nuclei in the matrix crystal.

  13. A 3D hybrid praseodymium-antimony-oxochloride compound: single-crystal-to-single-crystal transformation and photocatalytic properties.

    PubMed

    Zou, Guo-Dong; Zhang, Gui-Gang; Hu, Bing; Li, Jian-Rong; Feng, Mei-Ling; Wang, Xin-Chen; Huang, Xiao-Ying

    2013-11-01

    A 3D organic-inorganic hybrid compound, (2-MepyH)3[{Fe(1,10-phen)3}3][{Pr4Sb12O18(OH)Cl(11.5)}(TDC)(4.5)({Pr4Sb12O18(OH)Cl(9.5)} Cl)]·3(2-Mepy)·28H2O (1; 2-Mepy=2-methylpyridine, 1,10-phen=1,10-phenanthroline, H2TDC=thiophene-2,5-dicarboxylic acid), was hydrothermally synthesized and structurally characterized. Unusually, two kinds of high-nuclearity clusters, namely [(Pr4Sb12O18(OH)Cl11)(COO)5](5-) and [(Pr4Sb12O18(OH)Cl9)Cl(COO)5](4-), coexist in the structure of compound 1; two of the latter clusters are doubly bridged by two μ2-Cl(-) moieties to form a new centrosymmetric dimeric cluster. An unprecedented spontaneous and reversible single-crystal-to-single-crystal transformation was observed, which simultaneously involved a notable organic-ligand movement between the metal ions and an alteration of the bridging ion in the dimeric cluster, induced by guest-release/re-adsorption, thereby giving rise to the interconversion between compound 1 and the compound (2-MepyH)3[{Fe(1,10-phen)3}3][{Pr4Sb12O18(OH)Cl(11.5)}(TDC)4({Pr4Sb12O18Cl(10.5)(TDC)(0.5)(H2O)(1.5)}O(0.5))]·25H2O (1'). The mechanism of this transformation has also been discussed in great detail. Photocatalytic H2-evolution activity was observed for compound 1' under UV light with Pt as a co-catalyst and MeOH as a sacrificial electron donor.

  14. A 3D hybrid praseodymium-antimony-oxochloride compound: single-crystal-to-single-crystal transformation and photocatalytic properties.

    PubMed

    Zou, Guo-Dong; Zhang, Gui-Gang; Hu, Bing; Li, Jian-Rong; Feng, Mei-Ling; Wang, Xin-Chen; Huang, Xiao-Ying

    2013-11-01

    A 3D organic-inorganic hybrid compound, (2-MepyH)3[{Fe(1,10-phen)3}3][{Pr4Sb12O18(OH)Cl(11.5)}(TDC)(4.5)({Pr4Sb12O18(OH)Cl(9.5)} Cl)]·3(2-Mepy)·28H2O (1; 2-Mepy=2-methylpyridine, 1,10-phen=1,10-phenanthroline, H2TDC=thiophene-2,5-dicarboxylic acid), was hydrothermally synthesized and structurally characterized. Unusually, two kinds of high-nuclearity clusters, namely [(Pr4Sb12O18(OH)Cl11)(COO)5](5-) and [(Pr4Sb12O18(OH)Cl9)Cl(COO)5](4-), coexist in the structure of compound 1; two of the latter clusters are doubly bridged by two μ2-Cl(-) moieties to form a new centrosymmetric dimeric cluster. An unprecedented spontaneous and reversible single-crystal-to-single-crystal transformation was observed, which simultaneously involved a notable organic-ligand movement between the metal ions and an alteration of the bridging ion in the dimeric cluster, induced by guest-release/re-adsorption, thereby giving rise to the interconversion between compound 1 and the compound (2-MepyH)3[{Fe(1,10-phen)3}3][{Pr4Sb12O18(OH)Cl(11.5)}(TDC)4({Pr4Sb12O18Cl(10.5)(TDC)(0.5)(H2O)(1.5)}O(0.5))]·25H2O (1'). The mechanism of this transformation has also been discussed in great detail. Photocatalytic H2-evolution activity was observed for compound 1' under UV light with Pt as a co-catalyst and MeOH as a sacrificial electron donor. PMID:24114981

  15. [Homozygous hemoglobin-E (Hb-EE) disease].

    PubMed

    Amendola, G; Danise, P; Di Palma, A; Franzese, M; Avino, D; D'Arco, A M

    2004-01-01

    The Authors report on a 16 year-old girl, of Cambodian descent, who was admitted to the hospital for hematuria. She showed a mild microcytic, hypochromic anemia with a normal iron balance; clinical examination was normal with neither pallor nor icterus nor splenomegaly; electrophoresis of hemoglobin yielded no hemoglobin A, a sligtly increased amount of HbF and a single band with a mobility similar to that of HbA2; the patient showed no evidence of overt increased hemolysis. With the DNA technology a final diagnosis of homozygous hemoglobin E was made. Hemoglobin E is the most common Hb variant among Southeast Asian populations. The Authors discuss on the benign nature of Hb-EE disease, pointing out that the presence of a single HbE gene in combination with that for beta-thalassemia leads generally to a disorder often comparable in severity to that of homozygous beta-thalassemia. With the recent migration of a high number of people from the countries, where HbE is extremely frequent, to the Western world (including Italy), this thalassemia syndrome is now a global health problem; therefore its knowledge is an important diagnostic challenge to all the experts involved in the care of thalassemic patients.

  16. From single crystal surfaces to single atoms: investigating active sites in electrocatalysis.

    PubMed

    O'Mullane, Anthony P

    2014-04-21

    Electrocatalytic processes will undoubtedly be at the heart of energising future transportation and technology with the added importance of being able to create the necessary fuels required to do so in an environmentally friendly and cost effective manner. For this to be successful two almost mutually exclusive surface properties need to be reconciled, namely producing highly active/reactive surface sites that exhibit long term stability. This article reviews the various approaches which have been undertaken to study the elusive nature of these active sites on metal surfaces which are considered as adatoms or clusters of adatoms with low coordination number. This includes the pioneering studies at extended well defined stepped single crystal surfaces using cyclic voltammetry up to the highly sophisticated in situ electrochemical imaging techniques used to study chemically synthesised nanomaterials. By combining the information attained from single crystal surfaces, individual nanoparticles of defined size and shape, density functional theory calculations and new concepts such as mesoporous multimetallic thin films and single atom electrocatalysts new insights into the design and fabrication of materials with highly active but stable active sites can be achieved. The area of electrocatalysis is therefore not only a fascinating and exciting field in terms of realistic technological and economical benefits but also from the fundamental understanding that can be acquired by studying such an array of interesting materials. PMID:24599277

  17. Fabrication of Single Crystal MgO Capsules

    NASA Technical Reports Server (NTRS)

    Danielson, Lisa

    2012-01-01

    A method has been developed for machining MgO crystal blocks into forms for containing metallic and silicate liquids at temperatures up to 2,400 C, and pressures up to at least 320 kilobars. Possible custom shapes include tubes, rods, insulators, capsules, and guides. Key differences in this innovative method include drilling along the crystallographic zone axes, use of a vibration minimizing material to secure the workpiece, and constant flushing of material swarf with a cooling medium/lubricant (water). A single crystal MgO block is cut into a section .5 mm thick, 1 cm on a side, using a low-speed saw with a 0.004 blade. The cut is made parallel to the direction of cleavage. The block may be cut to any thickness to achieve the desired length of the piece. To minimize drilling vibrations, the MgO block is mounted on a piece of adhesive putty in a vise. The putty wad cradles the bottom half of the entire block. Diamond coring tools are used to drill the MgO to the desired custom shape, with water used to wet and wash the surface of swarf. Compressed air may also be used to remove swarf during breaks in drilling. The MgO workpiece must be kept cool at all times with water. After all the swarf is rinsed off, the piece is left to dry overnight. If the workpiece is still attached to the base of the MgO block after drilling, it may be cut off by using a diamond cutoff wheel on a rotary hand tool or by using a low-speed saw.

  18. PROBING STRESS EFFECTS IN SINGLE CRYSTAL ORGANIC TRANSISTORS BY SCANNING KELVIN PROBE MICROSCOPY

    SciTech Connect

    Teague, L

    2010-06-11

    We report scanning Kelvin probe microscopy (SKPM) of single crystal difluoro bis(triethylsilylethynyl) anthradithiophene (diF-TESADT) organic transistors. SKPM provides a direct measurement of the intrinsic charge transport in the crystals independent of contact effects and reveals that degradation of device performance occurs over a time period of minutes as the diF-TESADT crystal becomes charged.

  19. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION

    SciTech Connect

    A. Wang; G. Pickrell; R. May

    2002-09-10

    Accurate measurement of temperature is essential for the safe and efficient operation and control of a wide range of industrial processes. Appropriate techniques and instrumentation are needed depending on the temperature measurement requirements in different industrial processes and working environments. Harsh environments are common in many industrial applications. These harsh environments may involve extreme physical conditions, such as high-temperature, high-pressure, corrosive agents, toxicity, strong electromagnetic interference, and high-energy radiation exposure. Due to these severe environmental conditions, conventional temperature sensors are often difficult to apply. This situation has opened a new but challenging opportunity for the sensor society to provide robust, high-performance, and cost-effective temperature sensors capable of operating in those harsh environments. The focus of this research program has been to develop a temperature measurement system for temperature measurements in the primary and secondary stages of slagging gasifiers. For this application the temperature measurement system must be able to withstand the extremely harsh environment posed by the high temperatures and corrosive agents present in these systems. Real-time, accurate and reliable monitoring of temperature for the coal gasification process is important to realize the full economic potential of these gasification systems. Long life and stability of operation in the high temperature environment is essential for the temperature measurement system to ensure the continuous running of the coal gasification system over the long term. In this high temperature and chemically corrosive environment, rather limited high temperature measurement techniques such as high temperature thermocouples and optical/acoustic pyrometers are available, each with their own limitations. In this research program, five different temperature sensing schemes based on the single crystal sapphire

  20. General hypothesis governing the growth of single-crystal nanowires

    NASA Astrophysics Data System (ADS)

    Mohammad, S. Noor

    2010-06-01

    The growth and growth rates of single-crystal nanowires by vapor phase mechanisms have been studied. A hypothesis has been proposed, which lays down foundation for the nanowire growth. It redefines the basic concepts of droplets from seeds and describes the fundamental basis of the adhesive properties of droplets. A set of droplet characteristics has been defined, a model in the framework of the hypothesis has been developed, and theoretical calculations have been performed. Experiments have also been carried out. Close correspondences between the theoretical and the experimental results lend support for the hypothesis and the model. Additional experimental evidences quantify the validity of the hypothesis. The calculated results resolve conflicts and controversies. They address the roles of catalysts in the growth of single-crystal nanowires. They shed light on the basic differences in the growth of thin and thick nanowires. They elucidate possible relationship between eutectic temperature and activation energy in the vapor-liquid-solid growth. They provide ground rules that govern the relative supplies of constituent vapor species for the growth of compound semiconductor nanowires. They explain how the same alloyed droplet (e.g., Au/Ga) is activated differently under the influence of different nonmetal elements of different nanowires (for example, As of GaAs, P of GaP, and N of GaN). They demonstrate, for example, that the nanowire growth may be achieved by means that creates thermodynamic imbalance and nanopores inside the seeds at temperatures far below the seed's melting temperature. Alloying in the vapor-solid-liquid mechanism is one such means where growth of even thick nanowires (radius of rD≥50 nm) is possible at temperatures far below the eutectic temperature. The hypothesis, is called the simple, novel, and malleable (SNM) hypothesis. This hypothesis, together with the model, appears to have solved the basic origin of the nanowire growth. It

  1. Investigation of Advanced Processed Single-Crystal Turbine Blade Alloys

    NASA Technical Reports Server (NTRS)

    Peters, B. J.; Biondo, C. M.; DeLuca, D. P.

    1995-01-01

    This investigation studied the influence of thermal processing and microstructure on the mechanical properties of the single-crystal, nickel-based superalloys PWA 1482 and PWA 1484. The objective of the program was to develop an improved single-crystal turbine blade alloy that is specifically tailored for use in hydrogen fueled rocket engine turbopumps. High-gradient casting, hot isostatic pressing (HIP), and alternate heat treatment (HT) processing parameters were developed to produce pore-free, eutectic-free microstructures with different (gamma)' precipitate morphologies. Test materials were cast in high thermal gradient solidification (greater than 30 C/cm (137 F/in.)) casting furnaces for reduced dendrite arm spacing, improved chemical homogeneity, and reduced interdendritic pore size. The HIP processing was conducted in 40 cm (15.7 in.) diameter production furnaces using a set of parameters selected from a trial matrix study. Metallography was conducted on test samples taken from each respective trial run to characterize the as-HIP microstructure. Post-HIP alternate HT processes were developed for each of the two alloys. The goal of the alternate HT processing was to fully solution the eutectic gamma/(gamma)' phase islands and to develop a series of modified (gamma)' morphologies for subsequent characterization testing. This was accomplished by slow cooling through the (gamma)' solvus at controlled rates to precipitate volume fractions of large (gamma)'. Post-solution alternate HT parameters were established for each alloy providing additional volume fractions of finer precipitates. Screening tests included tensile, high-cycle fatigue (HCF), smooth and notched low-cycle fatigue (LCF), creep, and fatigue crack growth evaluations performed in air and high pressure (34.5 MPa (5 ksi)) hydrogen at room and elevated temperature. Under the most severe embrittling conditions (HCF and smooth and notched LCF in 34.5 MPa (5 ksi) hydrogen at 20 C (68 F), screening test

  2. SINGLE-CRYSTAL SAPPHIRE OPTICAL FIBER SENSOR INSTRUMENTATION

    SciTech Connect

    A. Wang; G. Pickrell; R. May

    2002-10-18

    Accurate measurement of temperature is essential for the safe and efficient operation and control of a wide range of industrial processes. Appropriate techniques and instrumentation are needed depending on the temperature measurement requirements in different industrial processes and working environments. Harsh environments are common in many industrial applications. These harsh environments may involve extreme physical conditions, such as high-temperature, high-pressure, corrosive agents, toxicity, strong electromagnetic interference, and high-energy radiation exposure. Due to these severe environmental conditions, conventional temperature sensors are often difficult to apply. This situation has opened a new but challenging opportunity for the sensor society to provide robust, high-performance, and cost-effective temperature sensors capable of operating in those harsh environments. The focus of this research program has been to develop a temperature measurement system for temperature measurements in the primary and secondary stages of slagging gasifiers. For this application the temperature measurement system must be able to withstand the extremely harsh environment posed by the high temperatures and corrosive agents present in these systems. Real-time, accurate and reliable monitoring of temperature for the coal gasification process is important to realize the full economic potential of these gasification systems. Long life and stability of operation in the high temperature environment is essential for the temperature measurement system to ensure the continuous running of the coal gasification system over the long term. In this high temperature and chemically corrosive environment, rather limited high temperature measurement techniques such as high temperature thermocouples and optical/acoustic pyrometers are available, each with their own limitations. In this research program, five different temperature sensing schemes based on the single crystal sapphire

  3. Synthesis, crystal growth, solubility, structural, optical, dielectric and microhardness studies of Benzotriazole-4-hydroxybenzoic acid single crystals

    NASA Astrophysics Data System (ADS)

    Silambarasan, A.; Krishna Kumar, M.; Thirunavukkarasu, A.; Mohan Kumar, R.; Umarani, P. R.

    2015-06-01

    Organic Benzotriazole-4-hydroxybenzoic acid (BHBA), a novel second-order nonlinear optical single crystal was grown by solution growth method. The solubility and nucleation studies were performed for BHBA crystal at different temperatures 30, 35, 40 45 and 50 °C. Single crystal X-ray diffraction study reveals that the BHBA belongs to Pna21 space group of orthorhombic crystal system. The crystal perfection of BHBA was examined from powder and high resolution X-ray diffraction analysis. UV-visible and photoluminescence spectra were recorded to study its transmittance and excitation, emission behaviors respectively. Kurtz powder second harmonic generation test reveals that, the frequency conversion efficiency of BHBA is 3.7 times higher than that of potassium dihydrogen phosphate (KDP) crystal. The dielectric constant and dielectric loss values were estimated for BHBA crystal at various temperatures and frequencies. The mechanical property of BHBA crystal was studied on (110), (010) and (012) planes by using Vicker's microhardness test. The chemical etching study was performed on (012) facet of BHBA crystal to analyze its growth feature.

  4. High quality FeSb2 single crystal growth by the gradient freeze technique

    NASA Astrophysics Data System (ADS)

    Cao, Yiming; Yuan, Shujuan; Liu, Ming; Kang, Baojuan; Lu, Bo; Zhang, Jincang; Cao, Shixun

    2013-01-01

    A single crystal of FeSb2 about 5 mm in diameter and 10 mm in length with a tapering spire was grown by the gradient freeze technique combining the Bridgman technique and flux method using Sb-rich melts in sealed quartz ampoules. X-ray powder diffraction pattern of single crystal FeSb2 indicates that it is a single phase marcasite structure. Clear Laue spots and scanning electron microscopy photographs indicate good quality and uniform of the FeSb2 single crystal. Magnetic susceptibility of FeSb2 along b-axis does not show the diamagnetic to paramagnetic crossover, indicating the intrinsic susceptibility of FeSb2 determined on large single crystals differs from that of the smaller samples prepared by other techniques. The new method of gradient freeze is of great significance for the single crystal growth of FeSb2 like materials with a peritectic point.

  5. Synthesis, growth, structural, thermal and optical studies of pyrrolidinium-2-carboxylate-4-nitrophenol single crystals

    NASA Astrophysics Data System (ADS)

    Swarna Sowmya, N.; Sampathkrishnan, S.; Vidyalakshmi, Y.; Sudhahar, S.; Mohan Kumar, R.

    2015-06-01

    Organic nonlinear optical material, pyrrolidinium-2-carboxylate-4-nitrophenol (PCN) was synthesized and single crystals were grown by slow evaporation solution growth method. Single crystal X-ray diffraction analysis confirmed the structure and lattice parameters of PCN crystals. Infrared, Raman and NMR spectral analyses were used to elucidate the functional groups present in the compound. The thermal behavior of synthesized compound was studied by thermogravimetric and differential scanning calorimetry (TG-DSC) analyses. The photoluminescence property was studied by exciting the crystal at 360 nm. The relative second harmonic generation (SHG) efficiency of grown crystal was estimated by using Nd:YAG laser with fundamental wavelength of 1064 nm.

  6. Growth of bulk single crystal of N-acetyl DL-methionine and its spectral characterization

    NASA Astrophysics Data System (ADS)

    Moovendaran, K.; Natarajan, S.

    2015-01-01

    Bulk size single crystal of N-acetyl DL-methionine (C7H13NO3S) (1) was grown using a home-made crystal growth setup (MKN setup). The identity of the grown crystal was confirmed by single crystal X-ray diffraction. The modes of vibrations of the functional groups present were assigned using the infrared (IR) spectrum. UV-vis-NIR spectra showed that the crystals have excellent transparency in the visible and infrared regions. The thermal stability and decomposition of the sample was studied by using thermal analysis (TGA/DTA). Photoluminescence excitation studies showed that the emission occurred at 350 nm for the compound.

  7. Growth of single crystals of mercuric iodide on the ground and in space

    SciTech Connect

    van den Berg, L.

    1993-06-01

    A short review is given of the methods by which mercuric iodide is prepared and purified to obtain material suitable for the growth of single crystals. Method used in our laboratory to grow single crystals up to 1,000 grams in weight from the vapor is discussed. Effects of gravity on the growth process are described. A crystal growth system suitable for operation in the reduced gravity environment of space has been designed and crystal growth experiments have been performed during the flights of Spacelab 3 (April 1985) and the International Microgravity Laboratory (January 1992). Structural quality and electronic properties of ground-based and space-grown crystals are compared.

  8. Growth rate dispersion of single potassium alum crystals

    NASA Astrophysics Data System (ADS)

    Lacmann, Rolf; Tanneberger, Ulrike

    1995-01-01

    The dispersion of growth rates is a lively discussed matter. However, still no acceptable explanation exists for the reason of the phenomenon describing that crystals of the same size growing under the same constant environmental conditions (as supersaturation, temperature and hydrodynamics) might grow with different rates. The individual face-specific growth rates of potassium aluminium alum crystals (diameter 1-3 mm) have been directly determined at different supersaturations ( σ = 0.5-5%). It was found that the order of growth rates of the appearing faces of unhurt and hurt crystals is {111} < {100{ < {110{. Further experiments have shown that face-specific growth rates of unhurt crystals (out of evaporation crystallization) are lower than those of hurt crystals (out of batch crystallization experiments).

  9. Growth, Structural And Optical Studies On Bis L-alanine Lithium Chloride (BLALC) Single Crystal

    NASA Astrophysics Data System (ADS)

    Rose, A. S. J. Lucia; Selvarajan, P.; Perumal, S.

    2011-10-01

    Bis L-alanine Lithium Chloride (BLALC) single crystals were grown successfully by solution method with slow evaporation technique at room temperature. Crystals of size 15 x 9 x 4 mm3 have been obtained in 28 days. The grown crystals were colourless and transparent. Single crystal X-ray diffraction (XRD) study showed that BLALC belongs to orthorhombic system with a non-centro-symmetric space group P212121. The crystallinity of BLALC crystal was confirmed by the powder X-ray diffraction study and diffraction peaks were indexed. The functional groups of the grown crystals have been identified by FTIR studies. UV-visible transmittance spectrum was recorded to study the optical transparency of BLALC crystal. The nonlinear optical (NLO) property of the grown crystal was confirmed by Kurtz-Perry powder technique.

  10. Crystalline perfection, spectroscopic investigations and transport properties of trisglycine zinc chloride NLO single crystal

    NASA Astrophysics Data System (ADS)

    Sugandhi, K.; Dinakaran, S.; Jose, M.; Uthrakumar, R.; Jeya Rejendran, A.; Bhagvannarayana, G.; Joseph, V.; Jerome Das, S.

    2010-09-01

    Bulk single crystals of trisglycine zinc chloride have been grown from aqueous solution by slow cooling technique. Single crystal and powder XRD analyses confirmed orthorhombic crystal structure with non-centrosymmetric space group Pbn2 1. High resolution X-ray diffraction results have established that the quality of the grown crystal is quite good for device fabrication. The crystal was characterized by FTIR and NMR spectral analyses. Optical absorption studies show that the material has very low absorption in the wavelength range 240-2000 nm. The analysis of absorption coefficient in the absorption region reveals a direct band gap of 4.21 eV. The crystal possesses remarkable thermal stability up to 229 °C. Photoconductivity studies of the grown crystal revealed the positive photoconducting nature. The grown crystal exhibited considerable hardness anisotropy with Vicker’s hardness tester. Dielectric constant and dielectric loss were calculated by varying frequencies at different temperatures.

  11. Monoclonal antibodies specific for sickle cell hemoglobin

    SciTech Connect

    Jensen, R.H.; Vanderlaan, M.; Grabske, R.J.; Branscomb, E.W.; Bigbee, W.L.; Stanker, L.H.

    1985-01-01

    Two mouse hybridoma cell lines were isolated which produce monoclonal antibodies that bind hemoglobin S. The mice were immunized with peptide-protein conjugates to stimulate a response to the amino terminal peptide of the beta chain of hemoglobin S, where the single amino acid difference between A and S occurs. Immunocharacterization of the antibodies shows that they bind specifically to the immunogen peptide and to hemoglobin S. The specificity for S is high enough that one AS cell in a mixture with a million AA cells is labeled by antibody, and such cells can be analyzed by flow cytometry. Immunoblotting of electrophoretic gels allows definitive identification of hemoglobin S as compared with other hemoglobins with similar electrophoretic mobility. 12 references, 4 figures.

  12. Growth of CuInTe{sub 2} single crystals by iodine transport and their characterization

    SciTech Connect

    Prabukanthan, P.; Dhanasekaran, R.

    2008-08-04

    The single crystals with stoichiometry close to 1:1:2 of CuInTe{sub 2} (CIT) have been grown by chemical vapor transport (CVT) technique using iodine as the transporting agent at different growth temperatures. Single crystal X-ray diffraction studies have confirmed the chalcopyrite structure for the grown crystals and the volume of unit cell is found to be the same for the crystals grown at different conditions. Energy dispersive X-ray (EDAX) analysis of CIT single crystals grown shows almost the same stoichiometric compositions. Scanning electron microscope (SEM) analysis reveals kink, step and layer patterns on the surface of CIT single crystals depending on the growth temperatures. The optical absorption spectra of as-grown CIT single crystals grown at different conditions show that they have same band gap energies (1.0405 eV). Raman spectra exhibit a high intensity peak of A{sub 1} mode at 123 cm{sup -1}. Annealed at 473 K in nitrogen atmosphere for 40 h CIT single crystals have higher hole mobility (105.6 cm{sup 2}V{sup -1}s{sup -1}) and hole concentration (23.28 x 10{sup 17} cm{sup -3}) compared with values of hole mobility (63.69 cm{sup 2} V{sup -1} s{sup -1}) and hole concentration (6.99 x 10{sup 15} cm{sup -3}) of the as-grown CIT single crystals.

  13. Modeling of Crystal Orientations in Laser Powder Deposition of Single Crystal Material

    NASA Astrophysics Data System (ADS)

    Qi, Huan; Liu, Zhaoyang

    This paper presents a numerical model which simulates the dynamic molten pool formation and the crystal orientations of solidified SX alloy in a multi-layer laser powder deposition process. Based on the mathematical model of coaxial laser direct deposition, the effect of parameters (laser power, scanning speed, powder feed rate) on the tendency to form [001] direction expitaxial grains during solidification was evaluated. In the transient three- dimensional model, physical phenomena including heat transfer, melting, grain formation during solidification, mass addition, and fluid flow in the melt pool, were modeled in a self-consistent manner. The temperature fields, fluid flow velocity, clad geometry (width, height and melt pool depth) and grain formation in melting pool of single layer are predicted.

  14. Effect of crystal orientation on conductivity and electron mobility in single-crystal alumina

    NASA Technical Reports Server (NTRS)

    Will, Fritz G.; Delorenzi, Horst G.; Janora, Kevin H.

    1992-01-01

    The electrical conductivity of high-purity, single-crystal alumina is determined parallel to and perpendicular to the c-axis. The mean conductivity of four samples of each orientation is a factor 3.3 higher parallel to the c-axis than perpendicular to it. The conductivity as a function of temperature is attributed to extrinsic electron conduction at temperatures from 400 to 900 C, and intrinsic semiconduction at temperatures from 900 to 1300 C. In the high-temperature regime, the slope on all eight specimens is 4.7 +/- 0.1 eV. Hence, the thermal bandgap at O K is 9.4 +/- 0.2 eV.

  15. Electric-field-assisted position and orientation control of organic single crystals.

    PubMed

    Kotsuki, Kenji; Obata, Seiji; Saiki, Koichiro

    2014-12-01

    We have investigated the motion of growing pentacene single crystals in solution under various electric fields. The pentacene single crystals in 1,2,4-trichlorobenzene responded to the electric field as if they were positively charged. By optimizing the strength and frequency of an alternating electric field, the pentacene crystals automatically bridged the electrodes on SiO2. The pentacene crystal with a large aspect ratio tended to direct the [1̅10] orientation parallel to the conduction direction, which will be suitable from a viewpoint of anisotropy in mobility. The present result shows a possibility of controlling the position and orientation of organic single crystals by the use of an electric field, which leads to high throughput and low cost industrial manufacturing of the single crystal array from solution.

  16. Organic Single-Crystal Light-Emitting Transistor Coupling with Optical Feedback Resonators

    PubMed Central

    Bisri, Satria Zulkarnaen; Sawabe, Kosuke; Imakawa, Masaki; Maruyama, Kenichi; Yamao, Takeshi; Hotta, Shu; Iwasa, Yoshihiro; Takenobu, Taishi

    2012-01-01

    Organic light-emitting transistors (OLETs) are of great research interest because they combine the advantage of the active channel of a transistor that can control the luminescence of an in-situ light-emitting diode in the same device. Here we report a novel single-crystal OLET (SCLET) that is coupled with single crystal optical feedback resonators. The combination of single-crystal waveguides with native Fabry-Perot cavities, formed by parallel crystal edges, drastically lowers the threshold energy for spectral narrowing and non-linear intensity enhancement. We apply this structure to SCLETs and demonstrate the first fabrication of a SCLET with the optical feedback resonators. PMID:23248748

  17. In situ templated synthesis of anatase single-crystal nanotube arrays.

    PubMed

    Zhao, Jianling; Wang, Xiaohui; Sun, Tieyu; Li, Longtu

    2005-10-01

    Anatase single-crystal nanotubes were obtained using an in situ templated method. First, highly ordered titania arrays were formed through an anodization process in H(3)PO(4) electrolytes containing 0.5 wt% HF. Under optimized conditions titania nanotubes with a diameter of up to 100 nm and a length of up to 1.1 microm were prepared. Second, the crystallization and stability of the titania nanotubes were studied in air at elevated temperatures. Anatase single-crystal nanotubes were fabricated after annealing the sample in air at 450 degrees C. The anatase single-crystal structure was verified by selected area diffraction pattern and HRTEM images.

  18. ESTIMATING THE STRENGTH OF SINGLE-ENDED DISLOCATION SOURCES IN MICROMETER-SIZED SINGLE CRYSTALS

    SciTech Connect

    Rao, S I; Dimiduk, D M; Tang, M; Parthasarathy, T A; Uchic, M D; Woodward, C

    2007-05-03

    A recent study indicated that the behavior of single-ended dislocation sources contributes to the flow strength of micrometer-scale crystals. In this study 3D discrete dislocation dynamics simulations of micrometer-sized volumes are used to calculate the effects of anisotropy of dislocation line tension (increasing Poisson's ratio, {nu}) on the strength of single-ended dislocation sources and, to compare them with the strength of double-ended sources of equal length. This is done by directly modeling their plastic response within a 1 micron cubed FCC Ni single crystal using DDS. In general, double-ended sources are stronger than single-ended sources of an equal length and exhibit no significant effects from truncating the long-range elastic fields at this scale. The double-ended source strength increases with Poisson ratio ({nu}), exhibiting an increase of about 50% at u = 0.38 (value for Ni) as compared to the value at {nu} = 0. Independent of dislocation line direction, for {nu} greater than 0.20, the strengths of single-ended sources depend upon the sense of the stress applied. The value for {alpha}, in the expression for strength, {tau} = {alpha}(L){micro}b/L is shown to vary from 0.4 to 0.84 depending upon the character of the dislocation and the direction of operation of the source at {nu} corresponding to that of Ni, 0.38 and a length of 933b. By varying the lengths of the sources from 933b to 233b, it was shown that the scaling of the strength of single-ended and double-ended sources with their length both follow a ln(L/b)/(L/b) dependence. Surface image stresses are shown to have little effect on the critical stress of single-ended sources at a length of {approx}250b or greater. The relationship between these findings and a recent statistical model for the hardening of small volumes is also discussed.

  19. Growth and characterization of 4-chloro-3-nitrobenzophenone single crystals using vertical Bridgman technique

    SciTech Connect

    Aravinth, K. Babu, G. Anandha Ramasamy, P.

    2014-04-24

    4-chloro-3-nitrobenzophenone (4C3N) has been grown by using vertical Bridgman technique. The grown crystal was confirmed by Powder X-ray diffraction analysis. The crystalline perfection of the grown crystal was examined by high-resolution X-ray diffraction study. The fluorescence spectra of grown 4C3N single crystals exhibit emission peak at 575 nm. The micro hardness measurements were used to analyze the mechanical property of the grown crystal.

  20. Growth of BPO4 single crystals from Li2Mo3O10 flux

    NASA Astrophysics Data System (ADS)

    Xu, Guogang; Li, Jing; Han, Shujuan; Guo, Yongjie; Wang, Jiyang

    2010-12-01

    Transparent single crystal of BPO4 with a typical sizes of 5 × 7 × 9 mm3 have been grown by the top-seeded solution growth (TSSG) slow-cooling method using Li2Mo3O10 as the flux. X-ray powder diffraction result shows that the as-grown crystal was well crystallized and indexed in a tetragonal system. The processing parameters and the effects of the flux on the crystal growth were investigated.

  1. Ge-Au eutectic bonding of Ge {100} single crystals

    NASA Astrophysics Data System (ADS)

    Knowlton, W. B.; Itoh, K. M.; Beeman, J. W.; Emes, J. H.; Loretto, D.; Haller, E. E.

    1993-11-01

    We present preliminary results on the eutectic bonding between two {100} Ge single crystal surfaces using thin films of Au ranging from 900Å/surface to 300Å/surface and Pd (10% the thickness of Au). Following bonding, plan view optical microscopy (OM) of the cleaved interface of samples with Au thicknesses ≤ 500Å/surface show a eutectic morphology more conducive to phonon transmission through the bond interface. High resolution transmission electron microscopy (HRTEM) cross sectional interface studies of a 300Å/surface Au sample show <100> epitaxial growth of Ge. In sections of the bond, lattice continuity of the Ge is apparent through the interface. TEM studies also reveal <110> heteroepitaxial growth of Au with a Au-Ge lattice mismatch of less than 2%. Eutectic bonds with 200Å/surface Au have been attained with characterization pending. An optical polishing technique for Ge has been optimized to insure intimate contact between the Ge surfaces prior to bonding. Interferometry analysis of the optically polished Ge surface shows that surface height fluctuations lie within ±150Å across an interval of 1mm. Characterization of phonon transmission through the interface is discussed with respect to low temperature detection of ballistic phonons.

  2. Crack tip plasticity in single crystal UO2: Atomistic simulations

    SciTech Connect

    Yongfeng Zhang; Paul C. Millett; Michael Tonks; Bulent Biner; Xiang-Yang Liu; David A. Andersson

    2012-11-01

    The fracture behavior of single crystal uranium dioxide is studied using molecular dynamics simulations at room temperature. Initially, an elliptical notch is created on either {111} or {110} planes, and tensile loading is applied normal to the crack planes. For cracks on both planes, shielding of crack tips by plastic deformation is observed, and crack extension occurs for crack on {111} planes only. Two plastic processes, dislocation emission and phase transformation are identified at crack tips. The dislocations have a Burgers vector of ?110?/2, and glide on {100} planes. Two metastable phases, the so-called Rutile and Scrutinyite phases, are identified during the phase transformation, and their relative stability is confirmed by separate density- functional-theory calculations. Examination of stress concentration near crack tips reveals that dislocation emission is not an effective shielding mechanism. The formation of new phases may effectively shield the crack provided all phase interfaces formed near the crack tips are coherent, as in the case of cracks residing on {110} planes.

  3. Neutron scattering and susceptibility measurements on single crystals of ?

    NASA Astrophysics Data System (ADS)

    Coad, S.; Lussier, J.-G.; McMorrow, D. F.; McK Paul, D.

    1996-08-01

    Single-crystal derivatives of the spin - Peierls (S - P) system, 0953-8984/8/34/014/img8, doped with Zn (0.5 to 2.4%) and Ni (1.7 to 6%) have been studied using SQUID magnetometry and neutron scattering. Our study shows that the impurities act to suppress the S - P state and produce a 3D Néel state at low temperatures. A phase diagram is constructed which shows that doping with either Zn (S = 0) or Ni (S = 1) leads to qualitatively similar results: the temperature at which the transition to the S - P state occurs decreases linearly with dopant concentration, whereas the Néel temperature, 0953-8984/8/34/014/img9, initially increases to a maximum at around 4% and then decreases for higher concentrations. These results are discussed with reference to models of defects in 1D spin chains and to earlier experimental work on this system. One difference between the Zn- and Ni-doped samples is that in the Néel state the 0953-8984/8/34/014/img10 moments in the former point along the c-axis, while in the latter they are along the a-axis.

  4. Single crystal growth and properties of two layered oxytellurides

    NASA Astrophysics Data System (ADS)

    Besara, Tiglet; Ramirez, Daniel; Siegrist, Theo; Sun, Jifeng; Whalen, Jeffrey; Tokumoto, Takahisa; McGill, Stephen; Stillwell, Ryan; Tozer, Stanley; Singh, David

    2015-03-01

    We report on the synthesis, structure, and physical properties of two layered oxytellurides: Ba3Yb2O5Te and Ba2TeO. Both compound were grown in single crystalline form using a molten metal flux, and crystallize in a tetragonal space group: P4 / mmm for Ba3Yb2O5Te and P4 / nmm for Ba2TeO. Ba3Yb2O5TeconsistsofBa2Yb2O5 perovskite double layers separated by a CsCl-type BaTe slab, while Ba2TeO consists of an inverse PbO-type BaO layer separated by an NaCl-type BaTe slab. Ba3Yb2O5Te displays short range 2D magnetic ordering below 4 K, and a sharp optical absorption feature at 1.27 eV consistent with a 2F7 / 2-->2F5 / 2 transition of Yb3+. For Ba2TeO, optical measurements display a sharp increase in absorbance, a manifest of a band edge. DOS corroborates the band gap, at 2.93 eV, indicating semiconducting behavior. DOE DE-SC0008832 (T.B., D.R., J.S., T.S.), NSF DMR-1157490 (NHMFL).

  5. Polarized infrared and Raman spectra of diglycine nitrate single crystal

    NASA Astrophysics Data System (ADS)

    Baran, Jan; Barnes, Austin J.; Ratajczak, Henryk

    1995-02-01

    Polarized infrared (4000- ca. 350 cm -1) and Raman (4000-10 cm -1) spectra of diglycine nitrate (DGN) single crystal were measured at room temperature; polarized infrared spectra were also measured at several low temperatures (230, 180, 15 K). In the paraelectric phase, the glycine ion pairs were found to be joined by a symmetrical ( Ci) O···H···O hydrogen bond and the nitrate ions exhibited high symmetry (most likely D36) as a result of effectively free rotation. The ferroelectric phase transition occurs because of inhibition of the rotation of the nitrate ions, with consequent lowering of their symmetry to C1, as a result of increased N-H···O hydrogen bonding interaction with the +NH 3 groups of the neighbouring glycine ions. The symmetry of the glycine ion pair also falls to C1 in the ferroelectric phase, but the proton motion in the O···H···O bond does not play a significant role in the phase transition.

  6. Radiation tolerance of piezoelectric bulk single-crystal aluminum nitride

    SciTech Connect

    David A. Parks; Bernhard R. Tittmann

    2014-07-01

    For practical use in harsh radiation environments, we pose selection criteria for piezoelectric materials for nondestructive evaluation (NDE) and material characterization. Using these criteria, piezoelectric aluminum nitride is shown to be an excellent candidate. The results of tests on an aluminumnitride-based transducer operating in a nuclear reactor are also presented. We demonstrate the tolerance of single-crystal piezoelectric aluminum nitride after fast and thermal neutron fluences of 1.85 × 1018 neutron/cm2 and 5.8 × 1018 neutron/cm2, respectively, and a gamma dose of 26.8 MGy. The radiation hardness of AlN is most evident from the unaltered piezoelectric coefficient d33, which measured 5.5 pC/N after a fast and thermal neutron exposure in a nuclear reactor core for over 120 MWh, in agreement with the published literature value. The results offer potential for improving reactor safety and furthering the understanding of radiation effects on materials by enabling structural health monitoring and NDE in spite of the high levels of radiation and high temperatures, which are known to destroy typical commercial ultrasonic transducers.

  7. Electrical transport properties of single-crystal Al nanowires

    NASA Astrophysics Data System (ADS)

    Brunbauer, Florian M.; Bertagnolli, Emmerich; Majer, Johannes; Lugstein, Alois

    2016-09-01

    Single-crystal Al nanowires (NWs) were fabricated by thermally induced substitution of vapor-liquid-solid grown Ge NWs by Al. The resistivity of the crystalline Al (c-Al) NWs was determined to be ρ = (131 ± 27) × 10-9 Ω m, i.e. approximately five times higher than for bulk Al, but they withstand remarkably high current densities of up to 1.78 × 1012 A m-2 before they ultimately melt due to Joule heating. The maximum current density before failure correlates with the NW diameter, with thinner NWs tolerating significantly higher current densities due to efficient heat dissipation and the reduced lattice heating in structures smaller than the electron-phonon scattering length. The outstanding current-carrying capacity of the c-Al NWs clearly exceeds those of common conductors and surpasses requirements for metallization of future high-performance devices. The linear temperature coefficient of the resistance of c-Al NWs appeared to be lower than for bulk Al and a transition to a superconducting state in c-Al NWs was observed at a temperature of 1.46 K.

  8. DEVELOPMENT OF PROTECTIVE COATINGS FOR SINGLE CRYSTAL TURBINE BLADES

    SciTech Connect

    Amarendra K. Rai

    2006-12-04

    Turbine blades in coal derived syngas systems are subject to oxidation and corrosion due to high steam temperature and pressure. Thermal barrier coatings (TBCs) are developed to address these problems. The emphasis is on prime-reliant design and a better coating architecture, having high temperature and corrosion resistance properties for turbine blades. In Phase I, UES Inc. proposed to develop, characterize and optimize a prime reliant TBC system, having smooth and defect-free NiCoCrAlY bond layer and a defect free oxide sublayer, using a filtered arc technology. Phase I work demonstrated the deposition of highly dense, smooth and defect free NiCoCrAlY bond coat on a single crystal CMSX-4 substrate and the deposition of alpha-alumina and yttrium aluminum garnet (YAG) sublayer on top of the bond coat. Isothermal and cyclic oxidation test and pre- and post-characterization of these layers, in Phase I work, (with and without top TBC layer of commercial EB PVD YSZ) revealed significant performance enhancement.

  9. Electrical transport properties of single-crystal Al nanowires

    NASA Astrophysics Data System (ADS)

    Brunbauer, Florian M.; Bertagnolli, Emmerich; Majer, Johannes; Lugstein, Alois

    2016-09-01

    Single-crystal Al nanowires (NWs) were fabricated by thermally induced substitution of vapor-liquid-solid grown Ge NWs by Al. The resistivity of the crystalline Al (c-Al) NWs was determined to be ρ = (131 ± 27) × 10‑9 Ω m, i.e. approximately five times higher than for bulk Al, but they withstand remarkably high current densities of up to 1.78 × 1012 A m‑2 before they ultimately melt due to Joule heating. The maximum current density before failure correlates with the NW diameter, with thinner NWs tolerating significantly higher current densities due to efficient heat dissipation and the reduced lattice heating in structures smaller than the electron–phonon scattering length. The outstanding current-carrying capacity of the c-Al NWs clearly exceeds those of common conductors and surpasses requirements for metallization of future high-performance devices. The linear temperature coefficient of the resistance of c-Al NWs appeared to be lower than for bulk Al and a transition to a superconducting state in c-Al NWs was observed at a temperature of 1.46 K.

  10. Unusual magnetotransport properties in a FeAs single crystal

    NASA Astrophysics Data System (ADS)

    Khim, Seunghyun; Gillig, Matthias; Klingeler, Rüdiger; Wurmehl, Sabine; Büchner, Bernd; Hess, Christian

    2016-05-01

    We have investigated the magnetoresistance (MR) and Hall resistivity properties of a FeAs single crystal which exhibits magnetic order below TN = 69 K. We observe nonlinear Hall resistivity and linear MR in the presence of magnetic-order-connected Fermi surface reconstruction. The analysis of the magnetotransport data using a two-carrier model suggests the emergence of an additional minor hole Fermi surface which coexists with major electron carriers below TN. The origin of the linear MR, however, remains inconsistent with current explanations based on the electronic band structure, i.e., the quantum linear MR model from linearly dispersive Dirac cones and linear MR as a result from strong velocity changes of the cyclotron motion near nested Fermi surfaces. While a macroscopic inhomogeneity in a mobility distribution may cause the linear MR as widely observed in other semimetals with high mobilities, the spiral magnetic order of FeAs seems to ask for an alternative description which takes the specific magnetic order and details of the electronic structure of FeAs as well as a possible entanglement between them into account.

  11. Ultraviolet Laser-induced ignition of RDX single crystal.

    PubMed

    Yan, Zhonghua; Zhang, Chuanchao; Liu, Wei; Li, Jinshan; Huang, Ming; Wang, Xuming; Zhou, Guorui; Tan, Bisheng; Yang, Zongwei; Li, Zhijie; Li, Li; Yan, Hongwei; Yuan, Xiaodong; Zu, Xiaotao

    2016-01-01

    The RDX single crystals are ignited by ultraviolet laser (355 nm, 6.4 ns) pulses. The laser-induced damage morphology consisted of two distinct regions: a core region of layered fracture and a peripheral region of stripped material surrounding the core. As laser fluence increases, the area of the whole crack region increases all the way, while both the area and depth of the core region increase firstly, and then stay stable over the laser fluence of 12 J/cm(2). The experimental details indicate the dynamics during laser ignition process. Plasma fireball of high temperature and pressure occurs firstly, followed by the micro-explosions on the (210) surface, and finally shock waves propagate through the materials to further strip materials outside and yield in-depth cracks in larger surrounding region. The plasma fireball evolves from isotropic to anisotropic under higher laser fluence resulting in the damage expansion only in lateral direction while maintaining the fixed depth. The primary insights into the interaction dynamics between laser and energetic materials can help developing the superior laser ignition technique. PMID:26847854

  12. Study of growth of single crystal ribbon in space

    NASA Technical Reports Server (NTRS)

    Wood, V. E.; Markworth, A. J.

    1975-01-01

    The technical feasibility is studied of growing single-crystal silicon ribbon in the space environment. Procedures are described for calculating the electromagnetic fields produced in a silicon ribbon by an rf shaping coil. The forces on the ribbon and the degree of shaping to be expected are determined. The expected steady-state temperature distribution in the ribbon is calculated in the one-dimensional approximation. Calculations on simplified models indicate, that lack of flatness of the shaped ribbon and excessive heating of the melt by the eddy currents induced by the shaping fields may pose problems. An analysis of the relative effects of various kinds of forces other than electromagnetic showed that in the space environment capillarity forces would dominate, and that the shape of the melt is thus principally determined by the shape of any solids with which it comes in contact. This suggests that ribbon may be produced simply by drawing between parallel wires. A concept is developed for a process of off-angle growth, in which the ribbon is pulled at an angle to the solidification front. Such a process promises to offer increased growth rate, better homogeneity, and thinner ribbon.

  13. Radiation tolerance of piezoelectric bulk single-crystal aluminum nitride.

    PubMed

    Parks, David A; Tittmann, Bernhard R

    2014-07-01

    For practical use in harsh radiation environments, we pose selection criteria for piezoelectric materials for non-destructive evaluation (NDE) and material characterization. Using these criteria, piezoelectric aluminum nitride is shown to be an excellent candidate. The results of tests on an aluminum-nitride- based transducer operating in a nuclear reactor are also presented. We demonstrate the tolerance of single-crystal piezoelectric aluminum nitride after fast and thermal neutron fluences of 1.85 x 10(18) neutron/cm(2) and 5.8 x 10(18) neutron/ cm(2), respectively, and a gamma dose of 26.8 MGy. The radiation hardness of AlN is most evident from the unaltered piezoelectric coefficient d33, which measured 5.5 pC/N after a fast and thermal neutron exposure in a nuclear reactor core for over 120 MWh, in agreement with the published literature value. The results offer potential for improving reactor safety and furthering the understanding of radiation effects on materials by enabling structural health monitoring and NDE in spite of the high levels of radiation and high temperatures, which are known to destroy typical commercial ultrasonic transducers.

  14. A face-shear mode single crystal ultrasonic motor

    NASA Astrophysics Data System (ADS)

    Li, Shiyang; Jiang, Wenhua; Zheng, Limei; Cao, Wenwu

    2013-05-01

    We report a face-shear mode ultrasonic motor (USM) made of [011]c poled Zt ± 45° cut 0.24Pb(In1/2Nb1/2)O3-0.46Pb(Mg1/3Nb2/3)O3-0.30PbTiO3 single crystal, which takes advantage of the extremely large d36 = 2368 pC/N. This motor has a maximum no-load linear velocity of 182.5 mm/s and a maximum output force of 1.03 N under the drive of Vp = 50 V, f = 72 kHz. Compared with the k31 mode USM made of Pb(Zr,Ti)O3 (PZT), our USM has simpler structure, lower driving frequency, much higher electromechanical coupling factor, and twice power density. This USM can be used for low frequency operation as well as cryogenic actuation with a large torque.

  15. Ferromagnetism in Silicon Single Crystals with Positively Charged Vacancy Clusters

    NASA Astrophysics Data System (ADS)

    Liu, Yu; Zhang, Xinghong; Yuan, Quan; Han, Jiecai; Zhou, Shengqiang; Song, Bo

    Defect-induced ferromagnetism provides an alternative for organic and semiconductor spintronics. Here, we investigated the magnetism in Silicon after neutron irradiation and try to correlate the observed magnetism to particular defects in Si. Commercially available p-type Si single crystal wafer is cut into pieces for performing neutron irradiations. The magnetic impurities are ruled out as they can not be detected by secondary ion mass spectroscopy. With positron annihilation lifetime spectroscopy, the positron trapping center corresponding to lifetime 375 ps is assigned to a kind of stable vacancy clusters of hexagonal rings (V6) and its concentration is enhanced by increasing neutron doses. After irradiation, the samples still show strong diamagnetism. The weak ferromagnetic signal in Si after irradiation enhances and then weakens with increasing irradiation doses. The saturation magnetization at room temperature is almost the same as that at 5 K. The X-ray magnetic circular dichroism further provides the direct evidence that Silicon is the origin of this ferromagnetism. Using first-principles calculations, it is found that positively charged V6 brings the spin polarization and the defects have coupling with each other. The work is financially supported by the Helmholtz Postdoc Programme (Initiative and Networking Fund, PD-146).

  16. Electrical transport properties of single-crystal Al nanowires.

    PubMed

    Brunbauer, Florian M; Bertagnolli, Emmerich; Majer, Johannes; Lugstein, Alois

    2016-09-23

    Single-crystal Al nanowires (NWs) were fabricated by thermally induced substitution of vapor-liquid-solid grown Ge NWs by Al. The resistivity of the crystalline Al (c-Al) NWs was determined to be ρ = (131 ± 27) × 10(-9) Ω m, i.e. approximately five times higher than for bulk Al, but they withstand remarkably high current densities of up to 1.78 × 10(12) A m(-2) before they ultimately melt due to Joule heating. The maximum current density before failure correlates with the NW diameter, with thinner NWs tolerating significantly higher current densities due to efficient heat dissipation and the reduced lattice heating in structures smaller than the electron-phonon scattering length. The outstanding current-carrying capacity of the c-Al NWs clearly exceeds those of common conductors and surpasses requirements for metallization of future high-performance devices. The linear temperature coefficient of the resistance of c-Al NWs appeared to be lower than for bulk Al and a transition to a superconducting state in c-Al NWs was observed at a temperature of 1.46 K. PMID:27533003

  17. Synthesis, single crystal structure and characterization of pentanitromonoformylhexaazaisowurtzitane.

    PubMed

    Chen, Huaxiong; Chen, Shusen; Li, Lijie; Jiao, Qingze; Wei, Tianyu; Jin, Shaohua

    2010-03-15

    Pentanitromonoformylhexaazaisowurtzitane (PNMFIW) was synthesized by the nitrolysis of tetraacetyldiformylhexaazaisowurtzitane (TADFIW) in mixed nitric and sulfuric acids and structurally characterized by element analysis, FT-IR, MS and (1)H NMR. Single crystals of PNMFIW were grown from aqueous solution employing the technique of controlled evaporation. PNMFIW belongs to the orthorhombic system having four molecules in the unit cell, with space group P2(1)2(1)2(1) and the lattice parameters a=8.8000(18)A, b=12.534(2)A, and c=12.829(3)A. The calculated density reaches 1.977 g/cm(3) at 93 K, while the experimental density is 1.946 g/cm(3) at 20 degrees C. The calculated detonation velocity and pressure of PNMFIW according to the experimental density are 9195.76 m/s and 39.68G Pa, respectively. PNMFIW is insensitive compared with epsilon-HNIW through drop hammer impact sensitivity test. PMID:19913358

  18. Thermal diffusion boron doping of single-crystal natural diamond

    NASA Astrophysics Data System (ADS)

    Seo, Jung-Hun; Wu, Henry; Mikael, Solomon; Mi, Hongyi; Blanchard, James P.; Venkataramanan, Giri; Zhou, Weidong; Gong, Shaoqin; Morgan, Dane; Ma, Zhenqiang

    2016-05-01

    With the best overall electronic and thermal properties, single crystal diamond (SCD) is the extreme wide bandgap material that is expected to revolutionize power electronics and radio-frequency electronics in the future. However, turning SCD into useful semiconductors requires overcoming doping challenges, as conventional substitutional doping techniques, such as thermal diffusion and ion implantation, are not easily applicable to SCD. Here we report a simple and easily accessible doping strategy demonstrating that electrically activated, substitutional doping in SCD without inducing graphitization transition or lattice damage can be readily realized with thermal diffusion at relatively low temperatures by using heavily doped Si nanomembranes as a unique dopant carrying medium. Atomistic simulations elucidate a vacancy exchange boron doping mechanism that occurs at the bonded interface between Si and diamond. We further demonstrate selectively doped high voltage diodes and half-wave rectifier circuits using such doped SCD. Our new doping strategy has established a reachable path toward using SCDs for future high voltage power conversion systems and for other novel diamond based electronic devices. The novel doping mechanism may find its critical use in other wide bandgap semiconductors.

  19. Electronic structure of graphene on single-crystal copper substrates

    NASA Astrophysics Data System (ADS)

    Walter, Andrew L.; Nie, Shu; Bostwick, Aaron; Kim, Keun Su; Moreschini, Luca; Chang, Young Jun; Innocenti, Davide; Horn, Karsten; McCarty, Kevin F.; Rotenberg, Eli

    2011-11-01

    The electronic structure of graphene on Cu(111) and Cu(100) single crystals is investigated using low-energy electron microscopy, low-energy electron diffraction, and angle-resolved photoemission spectroscopy. On both substrates the graphene is rotationally disordered and interactions between the graphene and substrate lead to a shift in the Dirac crossing of ˜-0.3 eV and the opening of a ˜250 meV gap. Exposure of the samples to air resulted in intercalation of oxygen under the graphene on Cu(100), which formed a (2×22)R45o superstructure. The effect of this intercalation on the graphene π bands is to increase the offset of the Dirac crossing (˜-0.6 eV) and enlarge the gap (˜350 meV). No such effect is observed for the graphene on the Cu(111) sample, with the surface state at Γ not showing the gap associated with a surface superstructure. The graphene film is found to protect the surface state from air exposure, with no change in the effective mass observed, as for one monolayer of Ag on Cu(111).

  20. Growth and Characterization of Graphene on Single Crystal Cu Substrates

    NASA Astrophysics Data System (ADS)

    Robinson, Z. R.; Tyagi, P.; Geisler, H.; Ventrice, C. A., Jr.; Bol, A. A.; Hannon, J. B.

    2012-02-01

    One of the key issues for the use of CVD graphene in device applications is the influence of defects on the transport properties of the graphene. Therefore, it is important to understand the influence of the substrate on the orientation of the graphene. Growth of graphene films on Cu(111) has the potential for producing films with a low defect density because of the hexagonal symmetry of the substrate and relatively small lattice mismatch, whereas growth on Cu(100) is expected to result in multi-domain growth because of its square symmetry. In this study, graphene films were grown on Cu single crystal substrates, and characterized with LEEM, LEED, SEM, AFM, and Raman spectroscopy. The clean Cu substrates were prepared by sputtering and annealing in UHV. For the initial growth studies, the samples were transferred to a tube furnace for graphene growth using a technique optimized for Cu foils. The UHV system has recently been modified with a button heater compatible with the conditions needed for graphene growth to enable in-situ growth and characterization.

  1. Single crystal CVD diamond membranes for betavoltaic cells

    NASA Astrophysics Data System (ADS)

    Delfaure, C.; Pomorski, M.; de Sanoit, J.; Bergonzo, P.; Saada, S.

    2016-06-01

    A single crystal diamond large area thin membrane was assembled as a p-doped/Intrinsic/Metal (PIM) structure and used in a betavoltaic configuration. When tested with a 20 keV electron beam from a high resolution scanning electron microscope, we measured an open circuit voltage (Voc) of 1.85 V, a charge collection efficiency (CCE) of 98%, a fill-factor of 80%, and a total conversion efficiency of 9.4%. These parameters are inherently linked to the diamond membrane PIM structure that allows full device depletion even at 0 V and are among the highest reported up to now for any other material tested for betavoltaic devices. It enables to drive a high short-circuit current Isc up to 7.12 μA, to reach a maximum power Pmax of 10.48 μW, a remarkable value demonstrating the high-benefit of diamond for the realization of long-life radioisotope based micro-batteries.

  2. Ultraviolet Laser-induced ignition of RDX single crystal

    PubMed Central

    Yan, Zhonghua; Zhang, Chuanchao; Liu, Wei; Li, Jinshan; Huang, Ming; Wang, Xuming; Zhou, Guorui; Tan, Bisheng; Yang, Zongwei; Li, Zhijie; Li, Li; Yan, Hongwei; Yuan, Xiaodong; Zu, Xiaotao

    2016-01-01

    The RDX single crystals are ignited by ultraviolet laser (355 nm, 6.4 ns) pulses. The laser-induced damage morphology consisted of two distinct regions: a core region of layered fracture and a peripheral region of stripped material surrounding the core. As laser fluence increases, the area of the whole crack region increases all the way, while both the area and depth of the core region increase firstly, and then stay stable over the laser fluence of 12 J/cm2. The experimental details indicate the dynamics during laser ignition process. Plasma fireball of high temperature and pressure occurs firstly, followed by the micro-explosions on the (210) surface, and finally shock waves propagate through the materials to further strip materials outside and yield in-depth cracks in larger surrounding region. The plasma fireball evolves from isotropic to anisotropic under higher laser fluence resulting in the damage expansion only in lateral direction while maintaining the fixed depth. The primary insights into the interaction dynamics between laser and energetic materials can help developing the superior laser ignition technique. PMID:26847854

  3. Electrical transport properties of single-crystal Al nanowires.

    PubMed

    Brunbauer, Florian M; Bertagnolli, Emmerich; Majer, Johannes; Lugstein, Alois

    2016-09-23

    Single-crystal Al nanowires (NWs) were fabricated by thermally induced substitution of vapor-liquid-solid grown Ge NWs by Al. The resistivity of the crystalline Al (c-Al) NWs was determined to be ρ = (131 ± 27) × 10(-9) Ω m, i.e. approximately five times higher than for bulk Al, but they withstand remarkably high current densities of up to 1.78 × 10(12) A m(-2) before they ultimately melt due to Joule heating. The maximum current density before failure correlates with the NW diameter, with thinner NWs tolerating significantly higher current densities due to efficient heat dissipation and the reduced lattice heating in structures smaller than the electron-phonon scattering length. The outstanding current-carrying capacity of the c-Al NWs clearly exceeds those of common conductors and surpasses requirements for metallization of future high-performance devices. The linear temperature coefficient of the resistance of c-Al NWs appeared to be lower than for bulk Al and a transition to a superconducting state in c-Al NWs was observed at a temperature of 1.46 K.

  4. Analysis of ripple formation in single crystal spot welds

    SciTech Connect

    Rappaz, M.; Corrigan, D.; Boatner, L.A.

    1997-10-01

    Stationary spot welds have been made at the (001) surface of Fe-l5%Ni-15%Cr single crystals using a Gas Tungsten Arc (GTA). On the top surface of the spot welds, very regular and concentric ripples were observed after solidification by differential interference color microscopy. Their height (typically 1--5 {micro}m) and spacing (typically {approximately} 60 {micro}m) decreased with the radius of the pool. These ripples were successfully accounted for in terms of capillary-wave theory using the fundamental mode frequency f{sub 0} given by the first zero of the zero-order Bessel function. The spacing d between the ripples was then equated to v{sub s}/f{sub 0}, where v{sub s} is the solidification rate. From the measured ripple spacing, the velocity of the pool was deduced as a function of the radius, and this velocity was in good agreement with the results of a heat-flow simulation.

  5. On plastic flow in notched hexagonal close packed single crystals

    NASA Astrophysics Data System (ADS)

    Selvarajou, Balaji; Kondori, Babak; Benzerga, A. Amine; Joshi, Shailendra P.

    2016-09-01

    The micromechanics of anisotropic plastic flow by combined slip and twinning is investigated computationally in single crystal notched specimens. Constitutive relations for hexagonal close packed materials are used which take into account elastic anisotropy, thirty potential deformation systems, various hardening mechanisms and rate-sensitivity. The specimens are loaded perpendicular to the c-axis but the presence of a notch generates three-dimensional triaxial stress states. The study is motivated by recent experiments on a polycrystalline magnesium alloy. To enable comparisons with these where appropriate, three sets of activation thresholds for the various deformation systems are used. For the conditions that most closely mimic the alloy material, attention is focused on the relative roles of pyramidal < c + a > and prismatic < a > slip, as well as on the emergence of {1012bar}[101bar1] extension twinning at sufficiently high triaxiality. In all cases, the spatial variations of stress triaxiality and plastic strain, inclusive of various system activities, are quantified along with their evolution upon straining. The implications of these findings in fundamental understanding of ductile failure of HCP alloys in general and Mg alloys in particular are discussed.

  6. Lateral-Structure Single-Crystal Hybrid Perovskite Solar Cells via Piezoelectric Poling.

    PubMed

    Dong, Qingfeng; Song, Jingfeng; Fang, Yanjun; Shao, Yuchuan; Ducharme, Stephen; Huang, Jinsong

    2016-04-13

    Single-crystal perovskite solar cells with a lateral structure yield an efficiency enhancement 44-fold that of polycrystalline thin films, due to the much longer carrier diffusion length. A piezoelectric effect observed in perovskite single-crystal and the strain-generated grain-boundaries enable ion migration to form a p-i-n structure. PMID:26836224

  7. Lateral-Structure Single-Crystal Hybrid Perovskite Solar Cells via Piezoelectric Poling.

    PubMed

    Dong, Qingfeng; Song, Jingfeng; Fang, Yanjun; Shao, Yuchuan; Ducharme, Stephen; Huang, Jinsong

    2016-04-13

    Single-crystal perovskite solar cells with a lateral structure yield an efficiency enhancement 44-fold that of polycrystalline thin films, due to the much longer carrier diffusion length. A piezoelectric effect observed in perovskite single-crystal and the strain-generated grain-boundaries enable ion migration to form a p-i-n structure.

  8. A Mechanochromic Single Crystal: Turning Two Color Changes into a Tricolored Switch.

    PubMed

    Ma, Zhiyong; Wang, Zhijian; Meng, Xiao; Ma, Zhimin; Xu, Zejun; Ma, Yuguo; Jia, Xinru

    2016-01-11

    The single crystal of M-4-B was obtained by attaching the boron of BH3 to the amine linker between a tetraphenylethylene (TPE) unit and rhodamine B. M-4-B showed a novel sequential tricolor switching from dark blue to bluish-green and to a reddish color upon grinding. The boron atom played a key role in developing the single crystal.

  9. CVD growth of single-crystal monolayer graphene on H-terminated germanium surface

    NASA Astrophysics Data System (ADS)

    Whang, Dongmok

    2015-03-01

    Large-area graphene has been grown by catalytic chemical vapor deposition (CVD) on various metal substrates. However, the uniform growth of single-crystal graphene over wafer-scale areas remains a challenge toward the commercial realization of various electronic, photonic, mechanical, and other devices based upon the outstanding properties of graphene. In this talk, we present the growth of single-crystal monolayer graphene on hydrogen-terminated germanium (Ge) surface. A single-crystal Ge substrate is a promising candidate for the growth of single-crystal graphene, because of (i) its catalytic activity for the catalytic decomposition of the formation of graphitic carbon on the surface; (ii) the extremely low solubility of carbon in Ge even at its melting temperature, enabling growth of complete monolayer graphene; (iii) the anisotropic atomic arrangement of single crystal Ge surface, enabling aligned growth of multiple seeds; (iv) the availability of a large area single-crystal surface via epitaxial Ge growth on Si wafers. We observed that well-defined atomic arrangement on the single crystal Ge surface enabled aligned growth of multiple seeds which can merge to single crystal graphene. Furthermore very weak van der Waals interaction between graphene and underlying Ge surface enabled facile dry transfer of graphene and recycling the Ge/Si wafer for continuing growth.

  10. Arc-melting preparation of single crystal LaB.sub.6 cathodes

    DOEpatents

    Gibson, Edwin D.; Verhoeven, John D.

    1977-06-21

    A method for preparing single crystals of lanthanum hexaboride (LaB.sub.6) by arc melting a rod of compacted LaB.sub.6 powder. The method is especially suitable for preparing single crystal LaB.sub.6 cathodes for use in scanning electron microscopes (SEM) and scanning transmission electron microscopes (STEM).

  11. The growth of Ho:YAG single crystals by Czochralski method and investigating the formed cores

    SciTech Connect

    Hasani Barbaran, J. Ghani Aragi, M. R.; Javaheri, I.; Baharvand, B.; Tabasi, M.; Layegh Ahan, R.; Jangjo, E.

    2015-12-15

    Ho:YAG single crystals were grown by Czochralski technique, and investigated by the X-ray diffraction (XRD) and optical methods. The crystals were cut and polished in order to observe and analyze their cores. It was found that the deviation of the cores formed in the Czochralski grown Ho:YAG single crystals are resulted from non-symmetrical status of thermal insulation around the Iridium crucible.

  12. Synthesis, single crystal structure and energy optimization of a multicomponent salt of imidazole and tetrabromoterepthalic acid

    SciTech Connect

    Singha, S.; Kumar, S.; Dey, S. K.

    2015-06-24

    Single crystal of a multicomponent salt (IMTBTP) of imidazole with tetrabromoterepthalic acid has been synthesized by slow evaporation method at room temperature. The crystal structure of the salt has been determined by single crystal x-ray diffraction technique. The supramolecular structure analysis reveals that the multicomponent salt is formed by noncovalent hydrogen bonding interaction and Br···π interaction. The energy optimization and HOMO-LUMO energy gap calculation have been carried out by Density Functional Theory.

  13. Reversible crystal deformation of a single-crystal host of copper(II) 1-naphthoate-pyrazine through crystal phase transition induced by methanol vapor sorption.

    PubMed

    Takasaki, Yuichi; Takamizawa, Satoshi

    2015-03-25

    A novel microporous single crystal of [Cu(II)2(1-NA)4(pyz)]n (1-NA: 1-naphthoate, pyz: pyrazine) exhibited bending and straightening action on a macroscopic scale during the first-order crystal phase transition induced by methanol vapor sorption.

  14. In vivo monitoring of oxidative burst on aloe under salinity stress using hemoglobin and single-walled carbon nanotubes modified carbon fiber ultramicroelectrode.

    PubMed

    Ren, Qiong-Qiong; Yuan, Xiao-Jun; Huang, Xiao-Rong; Wen, Wei; Zhao, Yuan-Di; Chen, Wei

    2013-12-15

    Single-walled carbon nanotubes (SWCNTs) and hemoglobin (Hb) modified carbon fiber ultramicroelectrode (CFUME) were employed to construct a direct electron transfer based in vivo H2O2 sensor. At the low working potential of -0.1 V, Hb/SWCNTs/CFUME showed a dynamic range up to 0.405 mM with a low detection limit of 4 μM (S/N=3) and a high sensitivity of 1.07 log(A) log(M)(-1) cm(-2). The apparent Michaelis-Menten constant (Km, app) was estimated to be as low as 1.35 mM. Due to the extremely small dimension and low working potential, Hb/SWCNTs/CFUME could give directly amperometric in vivo monitoring of H2O2 in aloe leaves with salt stress for 19.5h without the requirement of complex data processing and extra surface coatings to avoid interferences. The sharp increase of H2O2 level in aloe leaves with salt stress was clearly observed using Hb/SWCNTs/CFUME from 12.5 h, while in the aloe without salt stress, H2O2 level remained stable in the whole measurement. For further confirming the in vivo response of Hb/SWCNTs/CFUME, catalase (CAT) was injected into the spot adjacent to the sensor and caused rapid current decrease, which suggests the scavenging of H2O2. These results indicate that Hb/SWCNTs/CFUME can be a powerful tool for in vivo investigation of ROS.

  15. Series of solvent-induced single-crystal to single-crystal transformations with different sizes of solvent molecules.

    PubMed

    He, Yuan-Chun; Yang, Jin; Liu, Ying-Ying; Ma, Jian-Fang

    2014-07-21

    A highly stable soft porous coordination polymer (PCP), namely [Cu3(TP)4(N3)2(DMF)2]·2H2O·2DMF (1), has been synthesized via an in situ synthesis of 4-tetrazole pyridine (TP) under solvothermal conditions (DMF = N,N'-dimethylformamide). Remarkably, the solvent molecules in 1 can be respectively exchanged with cyclohexane (C6H12), cyclopentane (C5H10), decahydronaphthalene (C10H18), 1,4-dioxane (C4H8O2), and tetrahydropyrane (C5H10O) in single-crystal to single-crystal (SCSC) manners to yield [Cu3(TP)4(N3)2(DMF)2]·3C6H12 (1a), [Cu3(TP)4(N3)2(DMF)2]·2C5H10 (1b), [Cu3(TP)4(N3)2(DMF)2]·H2O·C10H18 (1c), [Cu3(TP)4(N3)2(DMF)2]·C4H8O2 (1d), [Cu3(TP)4(N3)2]·3C4H8O2 (1e), and [Cu3(TP)4(N3)2]·2H2O·C5H10O (1f). Further, the occluded cyclohexane molecules in 1a can be removed by heating to give its porous guest-free form [Cu3(TP)4(N3)2(DMF)2] (1g). Particularly, in water, 1 can lose its coordinated N3(-) anions to generate [Cu(TP)2(H2O)4]·4H2O (1h). More interestingly, the soft PCP (1) demonstrates the guest selectivity for the cycloalkane solvents, namely cyclohexane, cyclopentane, and decahydronaphthalene, in SCSC manners for the first time, attributed to the synergy effect between the size and geometry of the solvent and the shape of the framework cavity. Moreover, the desolvated samples of 1e show the highly selective gas adsorption of CO2 over N2, indicating its potential application in the separation of the CO2/N2 mixture.

  16. Poly(2-vinylpyridine)-block -Poly(ϵ-caprolactone) single crystals in micellar solution.

    PubMed

    Su, Mei; Huang, Haiying; Ma, Xiaojing; Wang, Qian; Su, Zhaohui

    2013-07-12

    Self-assembly of poly(2-vinylpyridine)-block-poly(ϵ-caprolactone) (P2VP-b-PCL) diblock copolymer in the presence of a selective solvent is investigated by transmission electron microscopy and atomic force microscopy. Addition of water into a P2VP-b-PCL solution in N,N-dimethylformamide at 20 °C produces elongated truncated lozenge shaped single crystals of uniform size and shape in large quantities. The single crystals are composed of PCL single-crystal layer sandwiched between two P2VP layers tethered on the top and bottom basal surfaces. The formation of the single crystals is found to depend on the temperature. These findings provide a facile approach to the preparation of uniform single crystals in large quantities. PMID:23661408

  17. Growth of semiconductor compound single crystal InSb by floating zone method (M-3)

    NASA Technical Reports Server (NTRS)

    Nakatani, I.

    1993-01-01

    Floating zone methods have potential applications in growing single high-quality semi-conductor crystals. In this method, melts can be sustained without containers and, therefore, are free from contamination from the containers. The main objective of this project is to use the Image Furnace to study a large diameter, (20 mm) single crystal of InSb under microgravity conditions. The behavior of the liquid column is recorded on the VTR tapes and is compared with what is expected theoretically. The single crystal grown in space is characterized by comparing it with single crystals grown on the ground with respect to crystallographic and electronic properties. The goal of this project is to confirm the effects of the microgravity on the single crystals.

  18. Optimization of the parameters affecting the shape and position of crystal-melt interface in YAG single crystal growth

    NASA Astrophysics Data System (ADS)

    Asadian, Morteza; Seyedein, S. H.; Aboutalebi, M. R.; Maroosi, A.

    2009-01-01

    In Czochralski method, the shape of crystal-melt interface and its position play a major role on the quality of single crystals. In the Czochralski crystal growth process having a nearly flat interface, a single crystal with less structural defect, uniform physical properties and homogenous chemical composition is obtained. In the present study, firstly a 2-D fluid flow and solidification model was developed to simulate the YAG single crystal growth process using a finite volume method. The fluid flow and solidification heat transfer model was further tested by available experimental data. The verified fluid flow and solidification heat transfer model was used to build an artificial neural network and trained to optimize the parameters affecting the shape and position of the interface. Finally, the trained neural network was employed to optimize the operating parameters such as pulling rate, rotation speed of the crystal, ambient gas and temperature of crucible wall to obtain a closely flat crystal-melt interface. The optimized variables were eventually used in fluid flow model to evaluate the performance of the optimization model.

  19. The evolution of machining-induced surface of single-crystal FCC copper via nanoindentation

    PubMed Central

    2013-01-01

    The physical properties of the machining-induced new surface depend on the performance of the initial defect surface and deformed layer in the subsurface of the bulk material. In this paper, three-dimensional molecular dynamics simulations of nanoindentation are preformed on the single-point diamond turning surface of single-crystal copper comparing with that of pristine single-crystal face-centered cubic copper. The simulation results indicate that the nucleation of dislocations in the nanoindentation test on the machining-induced surface and pristine single-crystal copper is different. The dislocation embryos are gradually developed from the sites of homogeneous random nucleation around the indenter in the pristine single-crystal specimen, while the dislocation embryos derived from the vacancy-related defects are distributed in the damage layer of the subsurface beneath the machining-induced surface. The results show that the hardness of the machining-induced surface is softer than that of pristine single-crystal copper. Then, the nanocutting simulations are performed along different crystal orientations on the same crystal surface. It is shown that the crystal orientation directly influences the dislocation formation and distribution of the machining-induced surface. The crystal orientation of nanocutting is further verified to affect both residual defect generations and their propagation directions which are important in assessing the change of mechanical properties, such as hardness and Young's modulus, after nanocutting process. PMID:23641932

  20. The evolution of machining-induced surface of single-crystal FCC copper via nanoindentation.

    PubMed

    Zhang, Lin; Huang, Hu; Zhao, Hongwei; Ma, Zhichao; Yang, Yihan; Hu, Xiaoli

    2013-05-04

    The physical properties of the machining-induced new surface depend on the performance of the initial defect surface and deformed layer in the subsurface of the bulk material. In this paper, three-dimensional molecular dynamics simulations of nanoindentation are preformed on the single-point diamond turning surface of single-crystal copper comparing with that of pristine single-crystal face-centered cubic copper. The simulation results indicate that the nucleation of dislocations in the nanoindentation test on the machining-induced surface and pristine single-crystal copper is different. The dislocation embryos are gradually developed from the sites of homogeneous random nucleation around the indenter in the pristine single-crystal specimen, while the dislocation embryos derived from the vacancy-related defects are distributed in the damage layer of the subsurface beneath the machining-induced surface. The results show that the hardness of the machining-induced surface is softer than that of pristine single-crystal copper. Then, the nanocutting simulations are performed along different crystal orientations on the same crystal surface. It is shown that the crystal orientation directly influences the dislocation formation and distribution of the machining-induced surface. The crystal orientation of nanocutting is further verified to affect both residual defect generations and their propagation directions which are important in assessing the change of mechanical properties, such as hardness and Young's modulus, after nanocutting process.