Gridded thermionic gun and integral superconducting ballistic bunch compression cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultheiss, Thomas

Electron-Ion colliders such as the Medium energy Electron Ion Collider (MEIC) being developed by JLAB require high current electrons with low energy spread for electron cooling of the collider ring. Accelerator techniques for improving bunch charge, average current, emittance, and energy spread are required for Energy Recovery Linacs (ERLs) and Circulator Rings (CR) for next generation colliders for nuclear physics experiments. Example candidates include thermionic-cathode electron guns with RF accelerating structures. Thermionic cathodes are known to produce high currents and have excellent lifetime. The success of the IR and THz Free-Electron Laser (FEL) designed and installed by Advanced Energy Systemsmore » at the Fritz Haber Institute (FHI) of the Max Planck Society in Berlin [1,2] demonstrates that gridded thermionic cathodes and rf systems be considered for next generation collider technology. In Phase 1 Advanced Energy Systems (AES) developed and analyzed a design concept using a superconducting cavity pair and gridded thermionic cathode. Analysis included Beam Dynamics and thermal analysis to show that a design of this type is feasible. The latest design goals for the MEIC electron cooler were for electron bunches of 420 pC at a frequency of 952.6 MHz with a magnetic field on the cathode of 2kG. This field magnetizes the beam imparting angular momentum that provides for helical motion of the electrons in the cooling solenoid. The helical motion increases the interaction time and improves the cooling efficiency. A coil positioned around the cathode providing 2kG field was developed. Beam dynamics simulations were run to develop the particle dynamics near the cathode and grid. Lloyd Young added capability to Tstep to include space charge effects between two plates and include image charge effects from the grid. He also added new pepper-pot geometry capability to account for honeycomb grids. These additions were used to develop the beam dynamics for this gun. The general design is a modified ballistic compression cavity pair with two independently powered cells [3]. The first is a cathode cell that includes the thermionic cathode and grid to provide for beam bunching. The second is a full cell with independent phasing and field levels designed to minimize energy spread. The primary goal for Phase II is to manufacture a superconducting gun with a thermionic cathode and imbedded coil. The system developed here is applicable to many high current electron accelerators. The analysis and design constraints imposed by the magnetized cathode make the cathode system developed here more complicated and limited than one without the magnetized beam constraints. High power ERLs would benefit by a gun with the capabilities shown here, 400 mA or more of current. ERLs hold great promise for electron cooling experiments, advanced light sources and Free Electron Lasers. This high current electron injector is a technological advance that will place the requirements for an ERL capable of providing quality bunches needed for cooling within the MEIC circulator ring within reach. This injector would have application to future ERLs around the world.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bogacz, Alex; Bruning, Oliver; Cruz-Alaniz, E.

Unprecedently high luminosity of 10 34 cm -2 s -1, promised by the LHeC accelerator complex poses several beam dynamics and lattice design challenges. As part of accelerator design process, exploration of innovative beam dynamics solutions and their lattice implementations is the key to mitigating performance limitations due to fundamental beam phenomena, such as: synchrotron radiation and collective instabilities. This article will present beam dynamics driven approach to accelerator design, which in particular, addresses emittance dilution due to quantum excitations and beam breakup instability in a large scale, multi-pass Energy Recovery Linac (ERL). The use of ERL accelerator technology tomore » provide improved beam quality and higher brightness continues to be the subject of active community interest and active accelerator development of future Electron Ion Colliders (EIC). Here, we employ current state of though for ERLs aiming at the energy frontier EIC. We will follow conceptual design options recently identified for the LHeC. The main thrust of these studies was to enhance the collider performance, while limiting overall power consumption through exploring interplay between emittance preservation and efficiencies promised by the ERL technology. Here, this combined with a unique design of the Interaction Region (IR) optics gives the impression that luminosity of 10 34 cm -2 s -1 is indeed feasible.« less

Novel Lattice Solutions for the LHeC

DOE PAGES

Bogacz, Alex; Bruning, Oliver; Cruz-Alaniz, E.; ...

2017-08-01

Unprecedently high luminosity of 10 34 cm -2 s -1, promised by the LHeC accelerator complex poses several beam dynamics and lattice design challenges. As part of accelerator design process, exploration of innovative beam dynamics solutions and their lattice implementations is the key to mitigating performance limitations due to fundamental beam phenomena, such as: synchrotron radiation and collective instabilities. This article will present beam dynamics driven approach to accelerator design, which in particular, addresses emittance dilution due to quantum excitations and beam breakup instability in a large scale, multi-pass Energy Recovery Linac (ERL). The use of ERL accelerator technology tomore » provide improved beam quality and higher brightness continues to be the subject of active community interest and active accelerator development of future Electron Ion Colliders (EIC). Here, we employ current state of though for ERLs aiming at the energy frontier EIC. We will follow conceptual design options recently identified for the LHeC. The main thrust of these studies was to enhance the collider performance, while limiting overall power consumption through exploring interplay between emittance preservation and efficiencies promised by the ERL technology. Here, this combined with a unique design of the Interaction Region (IR) optics gives the impression that luminosity of 10 34 cm -2 s -1 is indeed feasible.« less

Influence of CYP3A5 genetic variation on everolimus maintenance dosing after cardiac transplantation.

PubMed

Lesche, Dorothea; Sigurdardottir, Vilborg; Setoud, Raschid; Englberger, Lars; Fiedler, Georg M; Largiadèr, Carlo R; Mohacsi, Paul; Sistonen, Johanna

2015-12-01

Everolimus (ERL) has become an alternative to calcineurin inhibitors (CNIs) due to its renal-sparing properties, especially in heart transplant (HTx) recipients with kidney dysfunction. However, ERL dosing is challenging due to its narrow therapeutic window combined with high interindividual pharmacokinetic variability. Our aim was to evaluate the effect of clinical and genetic factors on ERL dosing in a pilot cohort of 37 HTx recipients. Variants in CYP3A5, CYP3A4, CYP2C8, POR, NR1I2, and ABCB1 were genotyped, and clinical data were retrieved from patient charts. While ERL trough concentration (C0 ) was within the targeted range for most patients, over 30-fold variability in the dose-adjusted ERL C0 was observed. Regression analysis revealed a significant effect of the non-functional CYP3A5*3 variant on the dose-adjusted ERL C0 (p = 0.031). ERL dose requirement was 0.02 mg/kg/d higher in patients with CYP3A5*1/*3 genotype compared to patients with CYP3A5*3/*3 to reach the targeted C0 (p = 0.041). ERL therapy substantially improved estimated glomerular filtration rate (28.6 ± 6.6 mL/min/1.73 m(2)) in patients with baseline kidney dysfunction. Everolimus pharmacokinetics in HTx recipients is highly variable. Our preliminary data on patients on a CNI-free therapy regimen suggest that CYP3A5 genetic variation may contribute to this variability. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The status of normal conducting RF (NCRF) guns, a summary of the ERL2005 workshop

NASA Astrophysics Data System (ADS)

Dowell, David H.; Lewellen, John W.; Nguyen, Dinh; Rimmer, Robert

2006-02-01

The 32nd Advanced ICFA Beam Dynamics Workshop on Energy Recovering Linacs (ERL2005) was held at Jefferson Laboratory, March 20-23, 2005. A wide range of ERL-related topics were presented and discussed in several working groups with Working Group 1 concentrating upon the physics and technology issues for DC, superconducting RF (SRF) and normal conducting RF (NCRF) guns. This paper summarizes the NCRF gun talks and reviews the status of NCRF gun technology. It begins with the presentations made on the subject of low-frequency, high-duty factor guns most appropriate for ERLs. One such gun at 433 MHz was demonstrated at 25%DF in 1992, while the CW and much improved version is currently being constructed at 700 MHz for LANL. In addition, the idea of combining the NCRF gun with a SRF linac booster was presented and is described in this paper. There was also a talk on high-field guns typically used for SASE-free electron lasers. In particular, the DESY coaxial RF feed design provides rotationally symmetric RF fields and greater flexibility in the placement of the focusing magnetic field. While in the LCLS approach, the symmetric fields are obtained with a dual RF feed and racetrack cell shape. Although these guns cannot be operated at high-duty factor, they do produce the best quality beams. With these limitations in mind, a section with material not presented at the workshop has been included in the paper. This work describes a re-entrant approach which may allow NCRF guns to operate with simultaneously increased RF fields and duty factors. And finally, a novel proposal describing a high-duty factor, two-frequency RF gun using a field emission source instead of a laser driven photocathode was also presented.

Expected thermal deformation and wavefront preservation of a cryogenic Si monochromator for Cornell ERL beamlines

PubMed Central

Huang, Rong; Bilderback, Donald H.; Finkelstein, Kenneth

2014-01-01

Cornell energy-recovery linac (ERL) beamlines will have higher power density and higher fractional coherence than those available at third-generation sources; therefore the capability of a monochromator for ERL beamlines has to be studied. A cryogenic Si monochromator is considered in this paper because the perfect atomic structure of Si crystal is needed to deliver highly coherent radiation. Since neither the total heat load nor the power density alone can determine the severity of crystal deformation, a metric called modified linear power density is used to gauge the thermal deformation. For all ERL undulator beamlines, crystal thermal deformation profiles are simulated using the finite-element analysis tool ANSYS, and wavefront propagations are simulated using Synchrotron Radiation Workshop. It is concluded that cryogenic Si monochromators will be suitable for ERL beamlines in general. PMID:24562557

Beam-dynamics driven design of the LHeC energy-recovery linac

NASA Astrophysics Data System (ADS)

Pellegrini, Dario; Latina, Andrea; Schulte, Daniel; Bogacz, S. Alex

2015-12-01

The LHeC is envisioned as a natural upgrade of the LHC that aims at delivering an electron beam for collisions with the existing hadronic beams. The current baseline design for the electron facility consists of a multipass superconducting energy-recovery linac (ERL) operating in a continuous wave mode. The unprecedently high energy of the multipass ERL combined with a stringent emittance dilution budget poses new challenges for the beam optics. Here, we investigate the performances of a novel arc architecture based on a flexible momentum compaction lattice that mitigates the effects of synchrotron radiation while containing the bunch lengthening. Extensive beam-dynamics investigations have been performed with placet2, a recently developed tracking code for recirculating machines. They include the first end-to-end tracking and a simulation of the machine operation with a continuous beam. This paper briefly describes the Conceptual Design Report lattice, with an emphasis on possible and proposed improvements that emerged from the beam-dynamics studies. The detector bypass section has been integrated in the lattice, and its design choices are presented here. The stable operation of the ERL with a current up to ˜150 mA in the linacs has been validated in the presence of single- and multibunch wakefields, synchrotron radiation, and beam-beam effects.

Lattice and beam optics design for suppression of CSR-induced emittance growth at the KEK-ERL test facility

NASA Astrophysics Data System (ADS)

Shimada, M.; Yokoya, K.; Suwada, T.; Enomoto, A.

2007-06-01

The lattice and beam optics of the arc section of the KEK-ERL test facility, having an energy of 200 MeV, were optimized to efficiently suppress emittance growth based on a simulation using a particle-tracking method taking coherent synchrotron radiation effects into account. The lattice optimization in the arc section was performed under two conditions: a high-current mode with a bunch charge of 76.9 pC without bunch compression, and a short-bunch mode with bunch compression, producing a final bunch length of around 0.1 ps. The simulation results showed that, in the high-current mode, emittance growth was efficiently suppressed by keeping a root-mean-square (rms) bunch length of 1 ps at a bunch charge of 76.9 pC, and in the short-bunch mode, emittance growth was kept within permissible limits with a maximum allowable bunch charge of 23.1 pC at an rms bunch length of 0.1 ps.

BERLinPro Booster Cavity Design, Fabrication and Test Plans

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burrill, Andrew; Anders, W; Frahm, A.

2014-12-01

The bERLinPro project, a 100 mA, 50 MeV superconducting RF (SRF) Energy Recovery Linac (ERL) is under construction at Helmholtz-Zentrum Berlin for the purpose of studying the technical challenges and physics of operating a high current, c.w., 1.3 GHz ERL. This machine will utilize three unique SRF cryomodules for the injector, booster and linac module respectively. The booster cryomodule will contain three 2-cell SRF cavities, based on the original design by Cornell University, and will be equipped with twin 115 kW RF power couplers in order to provide the appropriate acceleration to the high current electron beam. This paper willmore » review the status of the fabrication of the 4 booster cavities that have been built for this project by Jefferson Laboratory and look at the challenges presented by the incorporation of fundamental power couplers capable of delivering 115 kW. The test plan for the cavities and couplers will be given along with a brief overview of the cryomodule design.« less

Frequency choice of eRHIC SRF linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, W.; Ben-Zvi, I.; Roser, T.

2016-01-05

eRHIC is a FFAG lattice-based multipass ERL. The eRHIC SRF linac has been decided to change from 422 MHz 5-cell cavity to 647 MHz 5-cell cavity. There are several considerations affecting the frequency choice for a high-current multipass-ERL: the beam structure, bunch length, energy spread, beam-break-up (BBU) threshold, SRF loss considerations. Beyond the physics considerations, cost and complexity or risk is an important consideration for the frequency choice, especially when we are designing a machine to be built in a few years. Although there are some benefits of using a 422 MHz cavity for eRHIC ERL, however, there are somemore » very critical drawbacks, including lack of facilities to fabricate a 422 MHz 5-cell cavity, very few facilities to process such a cavity and no existing facility to test the cavity anywhere. As the cavity size is big and its weight is large, it is difficult to handle it during fabrication, processing and testing, and no one has experience in this area. As the cavity size is large, the cryomodule becomes big as well. All of these considerations drive the risk of building eRHIC ERL with 422 MHz cavities to a very high level. Therefore, a decision was made to change the frequency of main linac to be 647 MHz 5-cell cavities. This note will compare these two linacs: 422MHz 5-cell cavity linac and 647Mz 5-cell cavity SRF linac, from both practical point of view and physics point of view.« less

Conceptual design of a high real-estate gradient cavity for a SRF ERL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Chen; Ben-Zvi, Ilan; Hao, Yue

The term “real-estate gradient” is used to describe the energy gain provided by an accelerating structure per actual length it takes in the accelerator. given that the length of the tunnel available for the accelerator is constrained, the real-estate gradient is an important measure of the efficiency of a given accelerator structure. When designing an accelerating cavity to be efficient in this sense, the unwanted Higher Order Mode (HOM) fields should be reduced by suitable HOM dampers. This is a particularly important consideration for high current operation. The additional RF components might take longitude space and reduce the total acceleratingmore » efficiency. We describe a new high efficiency 5-cell cavity with the dampers included. The total length of the cavity is reduced by 13% as compared to a more conventional design without compromising the cavity fundamental-mode performance. In addition, the HOM impedance is reduced for a higher Beam-Break-Up (BBU) threshold of operating current. In this article, we consider an example, a possible application at the eRHIC Energy Recovery Linac (ERL).« less

Conceptual design of a high real-estate gradient cavity for a SRF ERL

NASA Astrophysics Data System (ADS)

Xu, Chen; Ben-Zvi, Ilan; Hao, Yue; Xin, Tianmu; Wang, Haipeng

2017-10-01

The term "real-estate gradient" is used to describe the energy gain provided by an accelerating structure per actual length it takes in the accelerator. given that the length of the tunnel available for the accelerator is constrained, the real-estate gradient is an important measure of the efficiency of a given accelerator structure. When designing an accelerating cavity to be efficient in this sense, the unwanted Higher Order Mode (HOM) fields should be reduced by suitable HOM dampers. This is a particularly important consideration for high current operation. The additional RF components might take longitude space and reduce the total accelerating efficiency. We describe a new high efficiency 5-cell cavity with the dampers included. The total length of the cavity is reduced by 13% as compared to a more conventional design without compromising the cavity fundamental-mode performance. In addition, the HOM impedance is reduced for a higher Beam-Break-Up (BBU) threshold of operating current. In this paper, we consider an example, a possible application at the eRHIC Energy Recovery Linac (ERL).

Conceptual design of a high real-estate gradient cavity for a SRF ERL

DOE PAGES

Xu, Chen; Ben-Zvi, Ilan; Hao, Yue; ...

2017-07-19

The term “real-estate gradient” is used to describe the energy gain provided by an accelerating structure per actual length it takes in the accelerator. given that the length of the tunnel available for the accelerator is constrained, the real-estate gradient is an important measure of the efficiency of a given accelerator structure. When designing an accelerating cavity to be efficient in this sense, the unwanted Higher Order Mode (HOM) fields should be reduced by suitable HOM dampers. This is a particularly important consideration for high current operation. The additional RF components might take longitude space and reduce the total acceleratingmore » efficiency. We describe a new high efficiency 5-cell cavity with the dampers included. The total length of the cavity is reduced by 13% as compared to a more conventional design without compromising the cavity fundamental-mode performance. In addition, the HOM impedance is reduced for a higher Beam-Break-Up (BBU) threshold of operating current. In this article, we consider an example, a possible application at the eRHIC Energy Recovery Linac (ERL).« less

The Status of Normal Conducting RF (NCRF) Guns, a Summary of the ERL2005 Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dowell, D.H.; /SLAC; Lewellen, J.W.

The 32nd Advanced ICFA Beam Dynamics Workshop on Energy Recovering Linacs (ERL2005) was held at Jefferson Laboratory, March 20 to 23, 2005. A wide range of ERL-related topics were presented and discussed in several working groups with Working Group 1 concentrated upon the physics and technology issues for DC, superconducting RF (SRF) and normal conducting RF (NCRF) guns. This paper summarizes the NCRF gun talks and reviews the status of NCRF gun technology. It begins with the presentations made on the subject of low-frequency, high-duty factor guns most appropriate for ERLs. One such gun at 433MHz was demonstrated at 25%DFmore » in 1992, while the CW and much improved version is currently being constructed at 700MHz for LANL. In addition, the idea of combining the NCRF gun with a SRF linac booster was presented and is described in this paper. There was also a talk on high-field guns typically used for SASE free electron lasers. In particular, the DESY coaxial RF feed design provides rotationally symmetric RF fields and greater flexibility in the placement of the focusing magnetic field. While in the LCLS approach, the symmetric fields are obtained with a dual RF feed and racetrack cell shape. Although these guns cannot be operated at high-duty factor, they do produce the best quality beams. With these limitations in mind, a section with material not presented at the workshop has been included in the paper. This work describes a re-entrant approach which may allow NCRF guns to operate with simultaneously increased RF fields and duty factors. And finally, a novel proposal describing a high-duty factor, two-frequency RF gun using a field emission source instead of a laser driven photocathode was also presented.« less

The status of normal conducting RF (NCRF) guns; a summary of the ERL2005 Workshop

DOE Office of Scientific and Technical Information (OSTI.GOV)

D.H. Dowell; J.W. Lewellen; D. Nguyen

The 32nd Advanced ICFA Beam Dynamics Workshop on Energy Recovering Linacs (ERL2005) was held at Jefferson Laboratory, March 20 to 23, 2005. A wide range of ERL-related topics were presented and discussed in several working groups with Working Group 1 concentrated upon the physics and technology issues for DC, superconducting RF (SRF) and normal conducting RF (NCRF) guns. This paper summarizes the NCRF gun talks and reviews the status of NCRF gun technology. It begins with the presentations made on the subject of low-frequency, high-duty factor guns most appropriate for ERLs. One such gun at 433MHz was demonstrated at 25%DFmore » in 1992, while the CW and much improved version is currently being constructed at 700MHz for LANL. In addition, the idea of combining the NCRF gun with a SRF linac booster was presented and is described in this paper. There was also a talk on high-field guns typically used for SASE free electron lasers. In particular, the DESY coaxial RF feed design provides rotationally symmetric RF fields and greater flexibility in the placement of the focusing magnetic field. While in the LCLS approach, the symmetric fields are obtained with a dual RF feed and racetrack cell shape. Although these guns cannot be operated at high-duty factor, they do produce the best quality beams. With these limitations in mind, a section with material not presented at the workshop has been included in the paper. This work describes a re-entrant approach which may allow NCRF guns to operate with simultaneously increased RF fields and duty factors. And finally, a novel proposal describing a high-duty factor, two-frequency RF gun using a field emission source instead of a laser driven photocathode was also presented.« less

Study of Collective Beam Effects in Energy Recovery Linac Driven Free Electron Lasers

NASA Astrophysics Data System (ADS)

Hall, Christpher C.

Collective beam effects such as coherent synchrotron radiation (CSR) and longitudinal space charge (LSC) can degrade the quality of high-energy electron beams used for applications such as free-electron lasers (FELs). The advent of energy recovery linac (ERL)-based FELs brings exciting possibilities for very high-average current FELs that can operate with greater efficiency. However, due to the structure of ERLs, they may be even more susceptible to CSR. It is therefore necessary that these collective beam effects be well understood if future ERL-based designs are to be successful. The Jefferson Laboratory ERL driven IR FEL provides an ideal test-bed for looking at how CSR impacts the electron beam. Due to its novel design we can easily test how CSR's impact on the beam varies as a function of compression within the machine. In this work we will look at measurements of both average energy loss and energy spectrum fragmentation as a function of bunch compression. These results are compared to particle tracking simulations including a 1D CSR model and, in general, good agreement is seen between simulation and measurement. Of particular interest is fragmentation of the energy spectrum that is observed due to CSR and LSC. We will also show how this fragmentation develops and how it can be mitigated through use of the sextupoles in the JLab FEL. Finally, a more complete 2D model is used to simulate CSR-beam interaction. Due to the parameters of the experiment it is expected that a 2D CSR model would yield different results than the 1D CSR model. However, excellent agreement is seen between the two CSR model results.

TAUROURSODEOXYCHOLIC ACID PREVENTS HEARING LOSS AND HAIR CELL DEATH IN Cdh23erl/erl MICE

PubMed Central

HU, J.; XU, M.; YUAN, J.; LI, B.; Entenman, S.; YU, H.; ZHENG, Q.Y.

2016-01-01

Sensorineural hearing loss has long been the subject of experimental and clinical research for many years. The recently identified novel mutation of the Cdh23 gene, Cdh23erl/erl, was proven to be a mouse model of human autosomal recessive nonsyndromic deafness (DFNB12). Tauroursodeoxycholic acid (TUDCA), a taurine-conjugated bile acid, has been used in experimental research and clinical applications related to liver disease, diabetes, neurodegenerative diseases, and other diseases associated with apoptosis. Because hair cell apoptosis was implied to be the cellular mechanism leading to hearing loss in Cdh23erl/erl mice (erl mice), this study investigated TUDCA’s otoprotective effects in erl mice: preventing hearing impairment and protecting against hair cell death. Our results showed that systemic treatment with TUDCA significantly alleviated hearing loss and suppressed hair cell death in erl mice. Additionally, TUDCA inhibited apoptotic genes and caspase-3 activation in erl mouse cochleae. The data suggest that TUDCA could be a potential therapeutic agent for human DFNB12. PMID:26748055

Chromaticity of the lattice and beam stability in energy recovery linacs

NASA Astrophysics Data System (ADS)

Litvinenko, Vladimir N.

2012-07-01

Energy recovery linacs (ERLs) are an emerging generation of accelerators that promises to revolutionize the fields of high-energy physics and photon sciences. These accelerators combine the advantages of linear accelerators with that of storage rings, and augur the delivery of electron beams of unprecedented power and quality. The use of superconducting radio-frequency cavities converts ERLs into nearly perfect “perpetuum mobile” accelerators, wherein the beam is accelerated to the desired energy, used, and then yields the energy back to the rf field. However, one potential weakness of these devices is transverse beam breakup instability that could severely limit the available beam current. In this paper, I propose a novel method of suppressing these dangerous effects via a natural phenomenon in the accelerators, viz., the chromaticity of the transverse motion.

UH-FLUX: Compact, Energy Efficient Superconducting Asymmetric Energy Recovery LINAC for Ultra-high Fluxes of X-ray and THz Radiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Konoplev, Ivan; Ainsworth, Robert; Burt, Graeme

The conventional ERLs have limited peak beam current because increasing the beam charge and repetition rate leads to appearance of the beam break-up instabilities. At this stage the highest current, from the SRF ERL, is around 300 mA. A single-turn (the beam will be transported through the accelerating section, interaction point and deceleration section of the AERL only once) Asymmetric Energy Recovery LINAC (AERL) is proposed. The RF cells in different sections of the cavity are tuned in such a way that only operating mode is uniform inside all of the cells. The AERL will drive the electron beams withmore » typical energies of 10 - 30 MeV and peak currents above 1 A, enabling the generation of high flux UV/X-rays and high power coherent THz radiation. We aim to build a copper prototype of the RF cavity for a compact AERL to study its EM properties. The final goal is to build AERL based on the superconducting RF cavity. Preliminary design for AERL's cavity has been developed and will be presented. The results of numerical and analytical models and the next steps toward the AERL operation will also be discussed.« less

Electronic Reference Library: Silverplatter's Database Networking Solution.

ERIC Educational Resources Information Center

Millea, Megan

Silverplatter's Electronic Reference Library (ERL) provides wide area network access to its databases using TCP/IP communications and client-server architecture. ERL has two main components: The ERL clients (retrieval interface) and the ERL server (search engines). ERL clients provide patrons with seamless access to multiple databases on multiple…

Optimal Er:YAG laser irradiation parameters for debridement of microstructured fixture surfaces of titanium dental implants.

PubMed

Taniguchi, Yoichi; Aoki, Akira; Mizutani, Koji; Takeuchi, Yasuo; Ichinose, Shizuko; Takasaki, Aristeo Atsushi; Schwarz, Frank; Izumi, Yuichi

2013-07-01

Er:YAG laser (ErL) irradiation has been reported to be effective for treating peri-implant disease. The present study seeks to evaluate morphological and elemental changes induced on microstructured surfaces of dental endosseous implants by high-pulse-repetition-rate ErL irradiation and to determine the optimal irradiation conditions for debriding contaminated microstructured surfaces. In experiment 1, dual acid-etched microstructured implants were irradiated by ErL (pulse energy, 30-50 mJ/pulse; repetition rate, 30 Hz) with and without water spray and for used and unused contact tips. Experiment 2 compared the ErL treatment with conventional mechanical treatments (metal/plastic curettes and ultrasonic scalers). In experiment 3, five commercially available microstructures were irradiated by ErL light (pulse energy, 30-50 mJ/pulse; pulse repetition rate, 30 Hz) while spraying water. In experiment 4, contaminated microstructured surfaces of three failed implants were debrided by ErL irradiation. After the experiments, all treated surfaces were assessed by stereomicroscopy, scanning electron microscopy (SEM), and/or energy-dispersive X-ray spectroscopy (EDS). The stereomicroscopy, SEM, and EDS results demonstrate that, unlike mechanical treatments, ErL irradiation at 30 mJ/pulse and 30 Hz with water spray induced no color or morphological changes to the microstructures except for the anodized implant surface, which was easily damaged. The optimized irradiation parameters effectively removed calcified deposits from contaminated titanium microstructures without causing substantial thermal damage. ErL irradiation at pulse energies below 30 mJ/pulse (10.6 J/cm(2)/pulse) and 30 Hz with water spray in near-contact mode seems to cause no damage and to be effective for debriding microstructured surfaces (except for anodized microstructures).

First Test Results of the bERLinPro 2-cell Booster Cavities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Burrill, Andrew; Anders, W.; Frahm, A.

2015-09-01

The bERLinPro Energy Recovery Linac (ERL) is currently being built at Helmholtz-Zentrum Berlin in order to study the physics of operating a high-current, a 100 mA, 50 MeV ERL utilizing all SRF cavity technology. This machine will utilize three unique SRF cryomodules for the photoinjector, booster and linac cryomodules respectively. The focus of this paper will be on the cavities contained within the booster cryomodule. Here there will be three 2-cell SRF cavities, based on the original design by Cornell University, but optimized to meet the needs of the project. All of the cavity fabrication, processing and testing was carriedmore » out at Jefferson Laboratory, where 4 cavities were produced, and the 3 cavities with the best RF performance were fitted with helium vessels for installation in the cryomodule. This paper will report on the test results of the cavities as measured in the vertical testing dewar at JLab after fabrication and again after outfitting with the helium vessels.« less

It takes a community to define a discipline: the 5th anniversary of Environmental Research Letters It takes a community to define a discipline: the 5th anniversary of Environmental Research Letters

NASA Astrophysics Data System (ADS)

Kammen, Dan

2012-03-01

When does a scientific journal become a community? This is not the question that we explicitly set out to address five years ago when IOP Publishing agreed to launch a new format interdisciplinary journal, Environmental Research Letters (ERL). However, on reflection, that is what ERL has become, and what it needs to continue to explore during its next years of growth and evolution. The motivation for founding ERL was initially more focused: to alter the mode of publication and review in the diverse, yet linked fields of environmental and resource studies and to ensure new levels of interaction, inclusion and equity, providing the platform for the world-changing research findings published in ERL. The key driver in this conversation was the issue of access. Specifically the situation that too many research findings were produced by, and for, very specific academic 'clubs', and that the opportunity to engage in discussion and debate over important emerging findings about our world was being severely limited by the process of publication in frequently slow-to-publish and tremendously expensive traditional academic journals. The need for change was, and still is, obvious. Environmental and resource studies have been the fastest growing and most diverse nexus of academic research, private sector concern and public sector action. Universities worldwide are adding academic and extension professorships and staff as well as experiencing increasing student interest in this area at a record pace. Corporate social and environmental sustainability has been changing dramatically and, in lurching fits and starts, a mosaic of environmental regulations—both carrots and sticks—are emerging worldwide. The 'Rio + 20' Earth Summit in June 2012 will be a testament to both the dramatic broadening of this interest, and the frustration about the lack of progress at building strong global institutions to permit international cooperation. This is a clear call for an on-going and evolving process of community building. ERL sought and continues to seek ways to lead this conversation. 1. Open access and equity First, all ERL articles and data sets are entirely open access. Once published, the materials are free to all users, affluent and poor, anywhere in the world. This is vital for a number of reasons. Environmental stress, degradation, and the creation of innovative solutions involves a global dialog, where traditional expensive subscription and single article costs, as some journals charge, are a complete barrier to researchers, fledgling entrepreneurs, and the public sector in developing nations and in poor communities. Instead, ERL charges authors a fee, generally covered by research grants. Further, we have been able to waive the open access article charge for authors based in areas of the world where this fee may prove prohibitive, as it can be in many developing countries. In this open access format, ERL publishes cutting-edge original research letters, commentary-style 'Perspective' pieces and editorial articles. ERL is committed to staying at the forefront of the 'gold standard' for open access publishing of articles and data—something that journals are increasingly taking up—and as new ideas come in as to how to improve this process, we will look to put them into practice. 2. Build a network researching sustainability Second, a journal that reaches across so many disciplines needs to be a place where results are not only reviewed and published quickly, but are then accessible to a broad audience, and are available for debate and conversation. ERL strives to maintain a 90 day timeline from submission to fully peer-reviewed publication online. This process in particular has only been possible with the incredible support of two groups: (1) the dedication of IOP Publishing and the amazingly talented staff they have been able to identify and recruit to work on ERL, and (2) the journal's Editorial Board. We have a team of Editors made up of the most remarkable researchers in their fields, each of whom have committed to this rapid review process. I have often remarked that my academic dream would be to be on a faculty with this group, and ERL has facilitated that vision both virtually and through our meetings. This group is responsible for both the quality of published articles and the speed of our review process. Rapid publication of rigorously reviewed short-format articles that in their language and style are widely accessible across disciplines has a huge impact. Young researchers doing innovative cutting-edge work often need to get papers out rapidly, and researchers, both junior and senior, gravitate to a journal where important findings can appear rapidly. The results here have been striking and can be showcased by a selection of highlights, such as: Achieved an ISI Impact Factor of 3.049 in 2010. An average of over 40 000 downloads per month in 2011. Hit 50 000 downloads in January 2012. Individual articles published in 2011 were downloaded over 650 times each on average during the same year. Submissions are up over 50% in 2011 compared to 2010. Citations to ERL content up 80% from 2009 to 2010. 3. Build a network conversation about sustainability The second part of the community building around sustainability, which ERL is now working to develop, is how to facilitate conversation about ideas that the research articles raise. Several exciting developments have shown that we can, in fact, do this particularly effectively, even in these early stages. As an example, ERL's sister community website, environmentalresearchweb, launched in 2007, publishing news, opinion, commentary, jobs, events and promotion of ERL authors' work. To date there are over 9000 registered users and over 6000 weekly newswire subscribers, popularity that reflects the incredibly high standards and wide accessibility of the expert journalistic content published on the site. environmentalresearchweb provides a discussion and commentary environment, a unique service in itself, and also a specific forum for research published in ERL. Individual topics often come up that warrant not only single articles, but collections of assessments, and ERL has published focus issues in key areas of environmental science including: tropical deforestation, wind energy, the Deepwater Horizon oil spill and climate engineering. ERL is currently publishing seven high-quality focus issues in cutting-edge areas such as arctic vegetation dynamics and cryospheric changes. Research letters appearing in ERL have received regular and significant coverage in the wider media, with several major news outlets and agencies choosing to cover ERL research, such as Nature, BBC News, New Scientist, The Guardian, Scientific American, Le Monde and many others. 4.The future community of ERL The process of community support will take many forms at ERL. The journal is growing—we have published the highest number of articles ever in a single volume in 2011 and are looking to continue this growth through into 2012. ERL had an over 50% increase in submissions from 2010 to 2011. One initiative to mark the journal's 5th anniversary was the 'Best articles' collection [1] a nominated compilation of articles showcasing the quality of published work in ERL as well as the subject area breadth. Co-authors of the five winning articles have been awarded free publication in ERL until the end of 2012. We can also see the open access model working, in that our articles are highly downloaded outside of the traditionally strong geographical areas of academia (North America and Western Europe), showing that the journal's readership is geographically diverse with high interest from Asia, South America and Africa. The journal is committed to progress and innovation; coming soon will be a set of new communication tools and online innovations, including: Video abstracts from the start of 2012 (for example, the video commentary published alongside this editorial). Enhanced HTML format of the full-text article from 2012 onwards—'Article Evolution', an on-going community feedback-driven project to improve the online delivery of research articles. New focus issues covering the latest cutting-edge areas of environmental science, with seven planned focus issues for 2012, including: second-generation biofuels, biodiversity, human health and well-being and environmental risks and migration. These innovations are improving all the time as a result of community response and feedback, both in terms of rating and critiquing the services that ERL provides, and also in looking for ways that the science-practitioner-implementer-regulator nexus can be strengthened. On all of these I offer my thanks to the ERL community; readers, authors, Editorial Board Members and many others, and extend a request for further suggested innovations for us to try in the next five-year window. References [1] Kammen D and Wright G 2011 'Best article' prize for the 5th anniversary of Environmental Research Letters Environ. Res. Lett. 6 040201

Chromaticity of the lattice and beam stability in energy-recovery linacs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Litvinenko, V.N.

2011-12-23

Energy recovery linacs (ERLs) are an emerging generation of accelerators promising to revolutionize the fields of high-energy physics and photon sciences. These accelerators combine the advantages of linear accelerators with that of storage rings, and hold the promise of delivering electron beams of unprecedented power and quality. Use of superconducting radio-frequency (SRF) cavities converts ERLs into nearly perfect 'perpetuum mobile' accelerators, wherein the beam is accelerated to a desirable energy, used, and then gives the energy back to the RF field. One potential weakness of these devices is transverse beam break-up instability that could severely limit the available beam current.more » In this paper, I present a method of suppressing these dangerous effects using a natural phenomenon in the accelerators, viz., the chromaticity of the transverse motion.« less

Investigation on Physicochemical Characteristics of a Nanoliposome-Based System for Dual Drug Delivery

NASA Astrophysics Data System (ADS)

Nam, Jae Hyun; Kim, So-Yeon; Seong, Hasoo

2018-04-01

Synergistic effects of multiple drugs with different modes of action are utilized for combinatorial chemotherapy of intractable cancers. Translation of in vitro synergistic effects into the clinic can be realized using an efficient delivery system of the drugs. Despite a few studies on nano-sized liposomes containing erlotinib (ERL) and doxorubicin (DOX) in a single liposome vesicle, reliable and reproducible preparation methods as well as physicochemical characteristics of a non-PEGylated nanoliposome co-encapsulated with ERL and DOX have not been yet elucidated. In this study, ERL-encapsulated nanoliposomes were prepared using the lipid film-hydration method. By ultrasonication using a probe sonicator, the liposome diameter was reduced to less than 200 nm. DOX was loaded into the ERL-encapsulated nanoliposomes using ammonium sulfate (AS)-gradient or pH-gradient method. Effects of DOX-loading conditions on encapsulation efficiency (EE) of the DOX were investigated to determine an efficient drug-loading method. In the EE of DOX, AS-gradient method was more effective than pH gradient. The dual drug-encapsulated nanoliposomes had more than 90% EE of DOX and 30% EE of ERL, respectively. Transmission electron microscopy and selected area electron diffraction analyses of the dual drug-encapsulated nanoliposomes verified the highly oriented DOX-sulfate crystals inside the liposome as well as the less oriented small crystals of ERL in the outermost region of the nanoliposome. The nanoliposomes were stable at different temperatures without an increase of the nanoliposome diameter. The dual drug-encapsulated nanoliposomes showed a time-differential release of ERL and DOX, implying proper sequential releases for their synergism. The preparation methods and the physicochemical characteristics of the dual drug delivery system contribute to the development of the optimal process and more advanced systems for translational researches.

A new THz/Far-IR beamline at the Jefferson Lab ERL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neil, George; Williams, Gwyn

2003-08-01

Multiparticle coherent synchrotron emitted by sub-picosecond bunches of electrons in an energy recovering linac, (ERL), at 75 MHz, yield average powers of ~ 100 watts, even for beam currents of 10 mA.This is 10,000 times higher than typical table-top systems.We describe a new ERL facility under construction at Jefferson Lab, and a new THz extraction system and beamline.We also present theoretical calculations.Potential applications of this exciting new source include driving new non-linear phenomena, performing pump-probe studies of dynamical properties of novel materials, and studying molecular vibrations and rotations, low frequency protein motions, phonons, superconductor bandgaps, electronic scattering, collective electronic excitationsmore » (e.g., charge density waves), and spintronics.This work was supported by the US Department of Energy, the Office of Naval Research and the Commonwealth of Virginia.G.L. Carr, M.C. Martin, W.R. McKinney, K. Jordan, G.R. Neil and G.P. Wi« less

EDITORIAL: Celebrating one year of Environmental Research Letters

NASA Astrophysics Data System (ADS)

Kammen, Daniel M.

2008-03-01

The one-year anniversary is a critical milestone for a new journal. At that point there are enough articles published to begin to define the scope and readership, yet generally not enough of a track-record for the full community to regard the new entrant as a fixture and a source of 'must read' material. Environmental Research Letters (ERL) has set itself a particularly large and interesting challenge: to help connect the vast community of environmental researchers, practitioners, activists, and interested informed observers. ERL and its partner online resource base and community website, environmentalresearchweb, fills a major void: a single locus for rapid publication of peer-reviewed and highly interdisciplinary material spanning literally every aspect of environmental research and thought. The wide range of material that falls squarely into the purview of ERL—from restoration ecology to global change science and politics, to toxicology and environmental justice, to environmental and social impacts of energy conversion—illustrate just how diverse a 'community' we hope to serve. Thanks to an exceptional editorial staff and board, and a diverse range of fascinating contributed papers, ERL is off to a particularly fast start. ERL has both a small advisory board and a larger editorial board. The board serves several functions, beginning with the traditional one of taking the lead on reviews of papers in such a dizzying array of areas. This task alone is a challenge because of the commitment ERL has made to exceptionally rapid publication: a goal of 90 days from submission to online publication for accepted papers. This goal, which we have generally met, includes the publication of complementary (but not always complimentary) 500 1000 word commentaries on a number of papers. To accomplish this alone the editorial board, and the reviewers, have been heroic, and deserve a huge round of applause. IOP Publishing too, has been truly wonderful in making this happen. The rapid publication has proven to be important in both expected and unexpected ways. First, it means that emerging environmental analysis can reach a readership fast, and that discussions of key findings do not even have to wait for the next paper to appear (which, also, can be rapid given that ERL publishes online as papers complete the review process, without waiting for a full, 'bound' volume, to be ready). This rapid dialog is the result of another innovation that IOP Publishing was willing to support: environmentalresearchweb. Launched in February 2007, environmentalresearchweb is a portal for environmental news, discussions of both papers in ERL and events—climate meetings such as the recent Bali Summit or the 2007 Nobel Peace Prize awarded to Al Gore and the Intergovernmental Panel on Climate Change (to which I am very proud to have contributed as a lead author)—as well as meetings, and other goings on that impact environmental issues globally. By all objective measures this most direct role of ERL has gone exceedingly well. Publication has been rapid, and of high quality, and the readership has been fantastic. We have had over 50 000 downloads of full article PDFs. The most popular few articles have received over 5000 downloads apiece, showing clearly how far the reach can be for online publication of important new material. ERL articles have been profiled in Nature and other top journals. This level of international visibility that ERL's open-access model guarantees for authors and their work is one particular benefit of the journal and one that we have already seen translating into article citations. Virtually every author asks about ERL's Impact Factor and it's listing in the various scientific ranking services. It generally takes over a year, or a volume of publication, for a new journal to be reviewed and the articles listed by all citation services. The most important criteria that determine journal listing vary between different citation services, but what is clear is that only continued publication of research of the highest quality, impact and visibility can guarantee success. Task #1: Submit research of the highest quality to benefit from and further increase the already impressive visibility of ERL. A second benefit of the rapid publication of ERL articles is one that I am now hearing to be increasingly important in the selection of which journal rising scholars choose for submission of their works. At the late doctoral student, postdoctoral, and pre-tenure stages rapid review and publication can be particularly important. The management and production team at IOP Publishing have been heroic in making ERL a virtually unique venue for such rapid movement of not just a few papers, but all papers to online publication. Rapid publication of all papers is, of course, important, but emerging science on critical environmental issues and the advancement of innovative emerging scholars is an area where ERL is both committed, and has proven to be a major innovator in the field. The content of ERL, of course, is where the action has been during year one, and where it will continue to be. There have been exceptionally important papers on trans-Atlantic transport of Saharan dust, on the ecological impact of unconventional fossil fuels, and on the health impacts of traditional fuels, and one of particular note by James Hansen on 'Scientific reticence and sea level rise' (Hansen 2007). Individual articles, a number published with associated commentaries by leading scholars, practitioners, and industry leaders, are part of the mix at ERL, but so are special focus issues that bring together thought leaders on important current topics. So far we have seen exceptional leadership by our editorial board and guest editors on a range of topics, including: International Environmental Health and Justice Tropical Deforestation and Greenhouse Gas Emissions Global Impacts of Particulate Matter Air Pollution Northern Hemisphere High Latitude Climate and Environmental Change Wind Energy Task #2: Take advantage of opportunities for special focus issues in ERL by proposing topics. Year two will see a number of new issues and challenges. A topic that ERL covers in detail is the science, technology, policy, economic, and social dimensions of the development of the next climate protocol, the evolution of the 'Bali Roadmap' into the 'Copenhagen Protocol' to replace the Kyoto Protocol. In this regard, the rapid publication and global open access of ERL affords a unique means for innovation and dialog. Access in developing nations, who must be included far more equitably and meaningfully in this new climate round, is something that ERL can and will provide (Cockerill and Knols 2008). Task #3: Facilitate an empowering and truly global dialog on development and climate that makes poorer communities full partners, not subjects, of the drive for global sustainability. Finally, a paper in volume 2, issue 2 of ERL marked a sad but telling occasion. A fascinating study, 'The regrets of procrastination in climate policy', by Klaus Keller, Alexander Robinson, David Bradford and Michael Oppenheimer used a coupled economic and climate model to evaluate the costs (regrets) of inaction on climate change (Keller et al 2007). The model they developed provides a running tally of the mounting costs, and risks, associated with continued greenhouse gas emissions. Tragically, David Bradford was killed at age 66 in a fire in 2005, and this paper, which the other authors dedicated to David, is one of his final publications. David was one of my mentors and colleagues at Princeton University where we worked together in the Science, Technology and Environmental Policy Program—a haven for scientists within the Woodrow Wilson School of Public and International Affairs. Ironically, this paper, and the events of 2007 came together in what I hope will be a lesson for those involved in energy and climate analysis and policy. David's distinguished career as an economist was highlighted by his work on tax law. His system, which he called the X tax, resembles what is known as the flat tax, insofar as it eliminates taxes on income earned through savings (Lehmann-Haupt 2005). But unlike the flat tax, which applies a single rate for all income brackets, Dr Bradford's X tax adds a graduated rate schedule, so that people with higher incomes pay at higher rates. This need to focus on the costs and the ability to pay for important policy innovations is vital to the coming climate discussions. A project my colleague Ann Kinzig and I started, in discussion with David Bradford, on the transition from our current global emissions portfolio (Kinzig and Kammen 1998) to a equitable, per capita, system (Baer et al 2000) highlighted the need to integrate the science and politics of a climate policy. Rapid publication and an ongoing dialog over climate solutions was the goal of that paper, and is what ERL today can provide as we enter the most vital phase of human interaction with the planet. References Baer P, Harte J, Herzog A, Holdren J, Hultman N, Kammen D M, Haya B, Norgaard R, and Raymond L 2000 Equal per capita emission rights: the key to a viable climate change policy Science 289 2287 Cockerill M J and Knols B G J 2008 Open access to research for the developing world Issues Sci. Technol. (Winter 2008) Hansen J E 2007 Scientific reticence and sea level rise Environ. Res. Lett. 2 024002 Keller K, Robinson A, Bradford D F and Oppenheimer M 2007 The regrets of procrastination in climate policy Environ. Res. Lett. 2 024004 Kinzig A P and Kammen D M 1998 National trajectories of carbon emissions: analysis of proposals to foster the transition to low-carbon economies Glob. Environ. Change 8 183 208 Lehmann-Haupt C 2005 David Bradford, 66, economist who advocated tax reform, dies New York Times (24 February)

Registration of two allelic erect leaf mutants of sorghum

USDA-ARS?s Scientific Manuscript database

Two allelic sorghum [Sorghum bicolor (L.) Moench] erect leaf (erl) mutants were isolated from an Annotated Individually-pedigreed Mutagenized Sorghum (AIMS) mutant library developed at the Plant Stress and Germplasm Development Unit, at Lubbock, Texas. The two mutants, erl1-1 and erl1-2, were isol...

Concept of economic readiness levels assessment

NASA Astrophysics Data System (ADS)

Yuniaristanto, Sutopo, W.; Widiyanto, A.; Putri, A. S.

2017-11-01

This research aims to build a concept of Economic Readiness Level (ERL) assessment for incubation center. ERL concept is arranged by considering both market and business aspects. Every aspect is divided into four phases and each of them consists of some indicators. Analytic Hierarchy Process (AHP) is used to develop the ERL in calculating the weight of every single aspect and indicator. Interval scale between 0 and 4 is also applied in indicator assessment. In order to calculate ERL, score in every indicator and the weight of both the aspect and indicator are considered. ERL value is able to show in detail the innovative product readiness level from economic sight, market and business aspect. There are four levels in Economic Readiness Level scheme which are investigation, feasibility, planning and introduction.

Identification of critical functional residues of receptor-like kinase ERECTA.

PubMed

Kosentka, Pawel Z; Zhang, Liang; Simon, Yonas A; Satpathy, Binita; Maradiaga, Richard; Mitoubsi, Omar; Shpak, Elena D

2017-03-01

In plants, extracellular signals are primarily sensed by plasma membrane-localized receptor-like kinases (RLKs). ERECTA is a leucine-rich repeat RLK that together with its paralogs ERECTA-like 1 (ERL1) and ERL2 regulates multiple aspects of plant development. ERECTA forms complexes with a range of co-receptors and senses secreted cysteine-rich small proteins from the EPF/EPFL family. Currently the mechanism of the cytoplasmic domain activation and transmission of the signal by ERECTA is unclear. To gain a better understanding we performed a structure-function analysis by introducing altered ERECTA genes into erecta and erecta erl1 erl2 mutants. These experiments indicated that ERECTA's ability to phosphorylate is functionally significant, and that while the cytoplasmic juxtamembrane domain is important for ERECTA function, the C-terminal tail is not. An analysis of multiple putative phosphorylation sites identified four amino acids in the activation segment of the kinase domain as functionally important. Homology of those residues to functionally significant amino acids in multiple other plant RLKs emphasizes similarities in RLK function. Specifically, our data predicts Thr812 as a primary site of phosphor-activation and potential inhibitory phosphorylation of Tyr815 and Tyr820. In addition, our experiments suggest that there are differences in the molecular mechanism of ERECTA function during regulation of stomata development and in elongation of above-ground organs. © The Author 2017. Published by Oxford University Press on behalf of the Society for Experimental Biology.

BEAM DYNAMICS ANALYSIS FOR THE ULTRA-FAST KICKER IN CIRCULAR COOLER RING OF JLEIC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Yulu; Wang, Haipeng; Rimmer, Robert A.

An ultra-fast kicker system consisting of four quarter wavelength resonator based deflecting cavities was developed that simultaneously resonates at 10 subharmonic modes of the 476.3MHz bunch repetition frequency. Thus every 10th bunch in the bunch train will experience a transverse kick while all the other bunches are undisturbed. This fast kicker is being developed for the Energy Recovery Linac (ERL) based electron Circular Cooler Ring (CCR) in the proposed Jefferson Lab Electron Ion Collider (JLEIC, previously MEIC). The electron bunches can be reused 10-30 turns thus the beam current in the ERL can be reduced to 1/10 - 1/30 (150mAmore » - 50mA) of the cooling bunch current (1.5A). In this paper, several methods to synthesize such a kicker waveform and the comparison made by the beam dynamics tracking in Elegant will be discussed.« less

Method for energy recovery of spent ERL beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marhauser, Frank; Hannon, Fay; Rimmer, Robert

A method for recovering energy from spent energy recovered linac (ERL) beams. The method includes adding a plurality of passive decelerating cavities at the beam dump of the ERL, adding one or more coupling waveguides between the passive decelerating cavities, setting an adequate external Q (Qext) to adjust to the beam loading situation, and extracting the RF energy through the coupling waveguides.

Intra-beam scattering and its application to ERL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fedotov A. V.

Treatment of Coulomb collisions within the beam requires consideration of both large and small angle scattering. Such collisions lead to the Touschek effect and Intrabeam Scattering (IBS). The Touschek effect refers to particle loss as a result of a single collision, where only transfer from the transverse direction into longitudinal plays a role. It is important to consider this effect for ERL design to have an appropriate choice of collimation system. The IBS is a diffusion process which leads to changes of beam distribution but does not necessarily result in a beam loss. Evaluation of IBS in ERLs, where beammore » distribution is non-Gaussian, requires special treatment. Here we describe the IBS and Touschek effects with application to ERLs.« less

Differences in SEM-AVS and ERM-ERL predictions of sediment impacts from metals in two US Virgin Islands marinas.

PubMed

Hinkey, Lynne M; Zaidi, Baqar R

2007-02-01

Two US Virgin Islands marinas were examined for potential metal impacts by comparing sediment chemistry data with two sediment quality guideline (SQG) values: the ratio of simultaneously extractable metals to acid volatile sulfides (SEM-AVS), and effects range-low and -mean (ERL-ERM) values. ERL-ERMs predicted the marina/boatyard complex (IBY: 2118 microg/g dry weight total metals, two exceeded ERMs) would have greater impacts than the marina with no boatyard (CBM: 231 microg/g dry weight total metals, no ERMs exceeded). The AVS-SEM method predicted IBY would have fewer effects due to high AVS-forming metal sulfide complexes, reducing trace metal bioavailability. These contradictory predictions demonstrate the importance of validating the results of either of these methods with other toxicity measures before making any management or regulatory decisions regarding boating and marina impacts. This is especially important in non-temperate areas where sediment quality guidelines have not been validated.

First beam commissioning at BNL ERL SRF Gun

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, W.; Altinbas, Z.; Belomestnykh, S.

The 704 MHz SRF gun successfully generated the first photoemission beam in November of 2014. The configurations of the test and the sub-systems are described.The latest results of SRF commissioning, including the cavity performance, cathode QE measurements, beam current/energy measurements, are presented in the paper.

EDITORIAL: The need and challenge for Environmental Research Letters

NASA Astrophysics Data System (ADS)

Kammen, Daniel M.

2006-11-01

Why another journal? This is the inevitable question that every effort to launch a new journal must, and should, address. A common statistic in the business world is that nine out of ten new restaurants fail. In the academic world something similar, but less definitive, can happen: a potentially interesting, but practically flawed, effort can be launched, never truly build an intellectual community, but then continue as a sub-critical, little-known journal for far too long. The challenge any new publication, academic or professional, faces is thus extreme. A new journal must find a way to usefully compete, and bring new value, in the face of multiple existing outlets for significant results, tremendous barriers to establishing a 'track record' or 'name recognition' against existing publications, and a print and a cyberspace increasingly desperate in the search for 'content', scientific or otherwise. In the case of Environmental Research Letters (ERL), however, these questions answered themselves and, as a result, I cannot imagine a more critically needed new publication. Indeed, the goal of ERL is to be more than simply one more good new journal. It is to be a place—both physical and online—that those engaged in environmental issues—from researchers within the physical and natural sciences, to those concerned with applied systems studies, modeling and simulation techniques, practical engagement in environmental activism, and developing, conducting or critiquing policy, legal, or business efforts—will all want to go to read, and to engage with colleagues. The environmental field has witnessed an incredible intellectual and professional proliferation. The areas of ecological resilience, global change science, policy, law and economics, industrial ecology, green buildings, environmental genomics, environmental archaeology, and the sociology of environmental movements have become increasingly regarded and, to varying degrees, recognized themselves as major fields. To that illustrative list, the number and diversity of emerging areas of investigation have also blossomed—from the economics of biodiversity, to the interface of synthetic biology and agro- and bioenergy crops and systems, to the potential of the nanotechnology/energy interface to become the 'next trillion dollar industry', environment, science, and technology are changing at incredible rates. While many of these areas have, or will have, highly focused journals and publications, a massive void has developed in the linking and dialog around what are the truly seminal advances in environmental science, social science, business, law, and policy. The need for this dialog is vital, and yet it is far too easy to forget in the hectic and information overloaded academic, business, governmental, and non-governmental communities. Everyone recognizes that environmental research and practice today exists within an increasingly interdisciplinary setting. That simple statement, often echoed, but easily forgotten on a day-to-day basis, is the intellectual glue that we must not neglect, and from which will come many of the advances that make understanding the environment so unique. ERL begins publication this month, October 2006, in an intellectual milieu that lacks a journal and a forum for such an environmental discussion and dialog. Until now, there has been no place to access the combination of environmental research breadth and depth that is the goal of ERL. The format of the journal is intended to facilitate such exchanges. ERL will be built around concise, high-impact original research Letters that present important results from across the environmental spectrum. As the first open-access journal to cover the whole of environmental science, our aim for ERL is to offer: Completely free access to original research of the highest quality. The environmental research and action community is diverse, both intellectually and geographically. ERL's open-access publishing model will make it a truly unique resource for scholars in developed and developing nations, as well as for environmental non-governmental groups, public servants, businesses and industry groups, and anyone who would not normally find their way, or have the financial means, to access an academic journal. Our goal to remain open-access will require that ERL secure a commitment of financial support—ideally from a foundation, individual, or a national or international research agency—so that the journal can publish in this fashion without the support of significant article publication charges. In this area we call on you to consider supporting, or to direct our editorial staff to groups who want to support, this venture. Exceptionally fast publication. As it gears up for regular publication, ERL is committed to a 90 day turn-around from article submission through to online publication for accepted Letters. Outstandingly high article visibility. ERL's open-access publishing model will guarantee its authors high article visibility, capturing a wide audience that includes both specialists and the wider community. The journal will serve its broad readership by publishing Perspectives that put disciplinary papers in a wider context, and explore the intellectual and policy impacts of broader, cross-disciplinary papers. A significant fraction of the research articles published in ERL will appear with 500 1000 word commentary pieces—solicited from not only leading scholars, but also leading political, business, legal, and community leaders—that extend and expand the dialog of the papers. Several articles published in the inaugural issue of the journal will be accompanied by such Perspectives. ERL will also link academic to professional development. In addition to primary research, the journal and its forthcoming accompanying community website will include: Special issues, focusing on fast-changing environmental issues. For 2007, we already have issues planned on 'Environmental Health and Justice', 'Global Impacts of Particulate Matter Air Pollution', 'Wind Energy' and 'The Rebirth of Nuclear Power'. Environmental news, including topical features and reviews of research developments, conferences, patents, and fast-breaking scientific and political events. Job listings and notices, in academic, industrial, and public-service areas, to help link the community and to make the website of added value to the entire environmental community. Events listings, providing a directory of conferences, meetings and workshops taking place across environmental science. Institute of Physics Publishing is a not-for-profit, learned society publisher with a comprehensive range of products serving the scientific community. ERL will therefore benefit from tools at the forefront of electronic publishing including completely online author and referee services that enable the community to communicate and provide feedback to the journal as easily and efficiently as possible. Finally, ERL would be impossible without a tremendously dedicated and active staff, which it has, but also without a diverse and engaged group of editors and advisors. It is in this last area, the editors and advisors who have agreed to sign-on and serve despite the incredible pressures and competition for their time, where I am truly thrilled. Both the board of editors and advisory committee collectively reflect the geographic, intellectual, and disciplinary diversity that ERL must support and expand. With aerosols, carbon sequestration, climate variability, ecological economics, environmental history, environmental justice and law, human and environmental health, R&D policy, renewable energy science and policy, science and government, all represented on the board, ERL has buy-in from leaders across the spectrum. That said, we always invite, and will solicit, input on areas and individuals to add. So welcome to the inaugural issue of Environmental Research Letters!

The JLab high power ERL light source

NASA Astrophysics Data System (ADS)

Neil, G. R.; Behre, C.; Benson, S. V.; Bevins, M.; Biallas, G.; Boyce, J.; Coleman, J.; Dillon-Townes, L. A.; Douglas, D.; Dylla, H. F.; Evans, R.; Grippo, A.; Gruber, D.; Gubeli, J.; Hardy, D.; Hernandez-Garcia, C.; Jordan, K.; Kelley, M. J.; Merminga, L.; Mammosser, J.; Moore, W.; Nishimori, N.; Pozdeyev, E.; Preble, J.; Rimmer, R.; Shinn, M.; Siggins, T.; Tennant, C.; Walker, R.; Williams, G. P.; Zhang, S.

2006-02-01

A new THz/IR/UV photon source at Jefferson Lab is the first of a new generation of light sources based on an Energy-Recovered, (superconducting) Linac (ERL). The machine has a 160 MeV electron beam and an average current of 10 mA in 75 MHz repetition rate hundred femtosecond bunches. These electron bunches pass through a magnetic chicane and therefore emit synchrotron radiation. For wavelengths longer than the electron bunch the electrons radiate coherently a broadband THz ˜ half cycle pulse whose average brightness is >5 orders of magnitude higher than synchrotron IR sources. Previous measurements showed 20 W of average power extracted [Carr, et al., Nature 420 (2002) 153]. The new facility offers simultaneous synchrotron light from the visible through the FIR along with broadband THz production of 100 fs pulses with >200 W of average power. The FELs also provide record-breaking laser power [Neil, et al., Phys. Rev. Lett. 84 (2000) 662]: up to 10 kW of average power in the IR from 1 to 14 μm in 400 fs pulses at up to 74.85 MHz repetition rates and soon will produce similar pulses of 300-1000 nm light at up to 3 kW of average power from the UV FEL. These ultrashort pulses are ideal for maximizing the interaction with material surfaces. The optical beams are Gaussian with nearly perfect beam quality. See www.jlab.org/FEL for details of the operating characteristics; a wide variety of pulse train configurations are feasible from 10 ms long at high repetition rates to continuous operation. The THz and IR system has been commissioned. The UV system is to follow in 2005. The light is transported to user laboratories for basic and applied research. Additional lasers synchronized to the FEL are also available. Past activities have included production of carbon nanotubes, studies of vibrational relaxation of interstitial hydrogen in silicon, pulsed laser deposition and ablation, nitriding of metals, and energy flow in proteins. This paper will present the status of the system and discuss some of the discoveries we have made concerning the physics performance, design optimization, and operational limitations of such a first generation high power ERL light source.

Energy Recovery Linacs for Light Source Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Neil

2011-04-01

Energy Recovery Linacs are being considered for applications in present and future light sources. ERLs take advantage of the continuous operation of superconducting rf cavities to accelerate high average current beams with low losses. The electrons can be directed through bends, undulators, and wigglers for high brightness x ray production. They are then decelerated to low energy, recovering power so as to minimize the required rf drive and electrical draw. When this approach is coupled with advanced continuous wave injectors, very high power, ultra-short electron pulse trains of very high brightness can be achieved. This paper will review the statusmore » of worldwide programs and discuss the technology challenges to provide such beams for photon production.« less

Vacuum system of the compact Energy Recovery Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Honda, T., E-mail: tohru.honda@kek.jp; Tanimoto, Y.; Nogami, T.

2016-07-27

The compact Energy Recovery Linac (cERL), a test accelerator to establish important technologies demanded for future ERL-based light sources, was constructed in late 2013 at KEK. The accelerator was successfully commissioned in early 2014, and demonstrated beam circulation with energy recovery. In the cERL vacuum system, low-impedance vacuum components are required to circulate high-intensity, low-emittance and short-bunch electron beams. We therefore developed ultra-high-vacuum (UHV)-compatible flanges that can connect beam tubes seamlessly, and employed retractable beam monitors, namely, a movable Faraday cup and screen monitors. In most parts of the accelerator, pressures below 1×10{sup −7} Pa are required to mitigate beam-gasmore » interactions. Particularly, near the photocathode electron gun and the superconducting (SC) cavities, pressures below 1×10{sup −8} Pa are required. The beam tubes in the sections adjoining the SC cavities were coated with non-evaporable getter (NEG) materials, to reduce gas condensation on the cryo-surfaces. During the accelerator commissioning, stray magnetic fields from the permanent magnets of some cold cathode gauges (CCGs) were identified as a source of the disturbance to the beam orbit. Magnetic shielding was specially designed as a remedy for this issue.« less

Energy-Recovery Linacs for Commercial Radioisotope Production

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Rolland Paul

Most radioisotopes are produced by nuclear reactors or positive ion accelerators, which are expensive to construct and to operate. Photonuclear reactions using bremsstrahlung photon beams from less-expensive electron linacs can generate isotopes of critical interest, but much of the beam energy in a conventional electron linac is dumped at high energy, making unwanted radioactivation. The largest part of this radioactivation may be completely eliminated by applying energy recovery linac technology to the problem with an additional benefit that the energy cost to produce a given amount of isotope is reduced. Consequently, a Superconducting Radio Frequency (SRF) Energy Recovery Linac (ERL)more » is a path to a more diverse and reliable domestic supply of short-lived, high-value, high-demand isotopes at a cost lower than that of isotopes produced by reactors or positive-ion accelerators. A Jefferson Lab approach to this problem involves a thin photon production radiator, which allows the electron beam to recirculate through rf cavities so the beam energy can be recovered while the spent electrons are extracted and absorbed at a low enough energy to minimize unwanted radioactivation. The thicker isotope photoproduction target is not in the beam. MuPlus, with Jefferson Lab and Niowave, proposed to extend this ERL technology to the commercial world of radioisotope production. In Phase I we demonstrated that 1) the ERL advantage for producing radioisotopes is at high energies (~100 MeV), 2) the range of acceptable radiator thickness is narrow (too thin and there is no advantage relative to other methods and too thick means energy recovery is too difficult), 3) using optics techniques developed under an earlier STTR for collider low beta designs greatly improves the fraction of beam energy that can be recovered (patent pending), 4) many potentially useful radioisotopes can be made with this ERL technique that have never before been available in significant commercial quantities. We developed a plan for the Phase II project that started with a Conceptual Design Report (CDR) based on the results of the Phase I studies and concluded with a Technical Design Report (TDR) for a facility to make isotopes that are most attractive based on market analyses.« less

PERLE. Powerful energy recovery linac for experiments. Conceptual design report

NASA Astrophysics Data System (ADS)

Angal-Kalinin, D.; Arduini, G.; Auchmann, B.; Bernauer, J.; Bogacz, A.; Bordry, F.; Bousson, S.; Bracco, C.; Brüning, O.; Calaga, R.; Cassou, K.; Chetvertkova, V.; Cormier, E.; Daly, E.; Douglas, D.; Dupraz, K.; Goddard, B.; Henry, J.; Hutton, A.; Jensen, E.; Kaabi, W.; Klein, M.; Kostka, P.; Lasheras, N.; Levichev, E.; Marhauser, F.; Martens, A.; Milanese, A.; Militsyn, B.; Peinaud, Y.; Pellegrini, D.; Pietralla, N.; Pupkov, Y.; Rimmer, R.; Schirm, K.; Schulte, D.; Smith, S.; Stocchi, A.; Valloni, A.; Welsch, C.; Willering, G.; Wollmann, D.; Zimmermann, F.; Zomer, F.

2018-06-01

A conceptual design is presented of a novel energy-recovering linac (ERL) facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade under study for the LHC, for which it would be the key demonstrator. PERLE is thus projected as a facility to investigate efficient, high current (HC) (>10 mA) ERL operation with three re-circulation passages through newly designed SCRF cavities, at 801.58 MHz frequency, and following deceleration over another three re-circulations. In its fully equipped configuration, PERLE provides an electron beam of approximately 1 GeV energy. A physics programme possibly associated with PERLE is sketched, consisting of high precision elastic electron–proton scattering experiments, as well as photo-nuclear reactions of unprecedented intensities with up to 30 MeV photon beam energy as may be obtained using Fabry–Perot cavities. The facility has further applications as a general technology test bed that can investigate and validate novel superconducting magnets (beam induced quench tests) and superconducting RF structures (structure tests with HC beams, beam loading and transients). Besides a chapter on operation aspects, the report contains detailed considerations on the choices for the SCRF structure, optics and lattice design, solutions for arc magnets, source and injector and on further essential components. A suitable configuration derived from the here presented design concept may next be moved forward to a technical design and possibly be built by an international collaboration which is being established.

Simultaneous determination of erlotinib and tamoxifen in rat plasma using UPLC-MS/MS: Application to pharmacokinetic interaction studies.

PubMed

Maher, Hadir M; Alzoman, Nourah Z; Shehata, Shereen M

2016-08-15

Tamoxifen (TAM) is a non-steroidal estrogen receptor antagonist that enhances erlotinib (ERL)-induced cytotoxicity in the treatment of NSCLC. ERL and TAM are metabolized by CYP3A4 enzymes. In addition, both drugs have the potential of altering the enzymatic activity through either inhibition (ERL) or induction (TAM). Thus it was expected that pharmacokinetics (PK) drug-drug interactions (DDIs) could be encountered following their co-administration. In this respect, a bioanalytical UPLC-MS/MS method has been developed and validated for the simultaneous determination of ERL and TAM in rat plasma samples, using ondansetron (OND) as an internal standard (IS). Plasma samples were prepared using mixed mode cationic solid phase extraction (SPE) STRATA™ -X-C 33μm cartridges with good extraction recovery of both drugs from rat plasma (Er% from -13.92 to -3.32). The drugs were separated on a Waters BEH™ C18 column with an isocratic elution using a mobile phase composed of a mixture of acetonitrile and water, each with 0.15% formic acid, in the ratio of 80: 20, v/v. Quantitation was carried out using the positive ionization mode with multiple reaction monitoring (MRM) at m/z 394.20>278.04 (ERL), m/z 372.25>72.01 (TAM), and m/z 294.18>170.16 (OND). The method was fully validated as per the FDA guidelines over the concentration range of 0.2-50ng/mL with very low lower limit of quantification (LLOQ) of 0.2ng/mL for both ERL and TAM. The intra- and inter-day assay precision (in terms of relative standard deviation, RSD) and accuracy (in terms of percentage relative error, % Er) were evaluated for both drugs and the calculated values evaluated at four different concentration levels were within the acceptable limits (<15%) for concentrations other than LLOQ and 20% for LLOQ. The method was successfully applied to the study of possible PK-DDI following the oral administration of ERL and TAM in a combination, compared to their single administration. Copyright © 2016 Elsevier B.V. All rights reserved.

HOM identification by bead pulling in the Brookhaven ERL cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hahn H.; Calaga, R.; Jain, P.

2012-06-25

Several past measurements of the Brookhaven ERL at superconducting temperature produced a long list of higher order modes (HOMs). The Niobium 5-cell cavity is terminated with HOM ferrite dampers that successfully reduce the Q-factors to tolerable levels. However, a number of undamped resonances with Q {ge} 10{sup 6} were found at 4 K and their mode identification remained as a goal for this paper. The approach taken here consists in taking different S{sub 21} measurements on a copper cavity replica of the ERL which can be compared with the actual data and also with Microwave Studio computer simulations. Several differentmore » S{sub 21} transmission measurements are used, including those taken from the fundamental input coupler to the pick-up probe across the cavity, between probes in a single cell, and between beam-position monitor probes in the beam tubes. Mode identification is supported by bead pulling with a metallic needle or a dielectric sphere that are calibrated in the fundamental mode. This paper presents results for HOMs in the first two dipole bands with the prototypical 958 MHz trapped mode, the lowest beam tube resonances, and high-Q modes in the first quadrupole band and beyond.« less

Recent Progress on High-Current SRF Cavities at Jlab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robert Rimmer, William Clemens, James Henry, Peter Kneisel, Kurt Macha, Frank Marhauser, Larry Turlington, Haipeng Wang, Daniel Forehand

2010-05-01

JLab has designed and fabricated several prototype SRF cavities with cell shapes optimized for high current beams and with strong damping of unwanted higher order modes. We report on the latest test results of these cavities and on developments of concepts for new variants optimized for particular applications such as light sources and high-power proton accelerators, including betas less than one. We also report on progress towards a first beam test of this design in the recirculation loop of the JLab ERL based FEL. With growing interest worldwide in applications of SRF for high-average power electron and hadron machines, amore » practical test of these concepts is highly desirable. We plan to package two prototype cavities in a de-mountable cryomodule for temporary installation into the JLab FEL for testing with RF and beam. This will allow verification of all critical design and operational parameters paving the way to a full-scale prototype cryomodule.« less

Annual Typhoon Report 1979.

DTIC Science & Technology

1979-01-01

clouds and latent and sensible heat A case study, based on an active transfer from the ocean. Preliminary tests tropical cyclone period, is being...GABLES, FL 44) CINCPACFLT (5) NOAA/EDS WASHINGTON, DC (2) CIUDAD UNIV, MEXICO (1) NOAA/ERL BOULDER, CO (1) CIVIL DEFENSE, GUAM (4) NOAA/ERL MIAMI (2

Half-Cell RF Gun Simulations with the Electromagnetic Particle-in-Cell Code VORPAL

NASA Astrophysics Data System (ADS)

Paul, K.; Dimitrov, D. A.; Busby, R.; Bruhwiler, D. L.; Smithe, D.; Cary, J. R.; Kewisch, J.; Kayran, D.; Calaga, R.; Ben-Zvi, I.

2009-01-01

We have simulated Brookhaven National Laboratory's half-cell superconducting RF gun design for a proposed high-current ERL using the three-dimensional, electromagnetic particle-in-cell code VORPAL. VORPAL computes the fully self-consistent electromagnetic fields produced by the electron bunches, meaning that it accurately models space-charge effects as well as bunch-to-bunch beam loading effects and the effects of higher-order cavity modes, though these are beyond the scope of this paper. We compare results from VORPAL to the well-established space-charge code PARMELA, using RF fields produced by SUPERFISH, as a benchmarking exercise in which the two codes should agree well.

Comparative studies on the human serum albumin binding of the clinically approved EGFR inhibitors gefitinib, erlotinib, afatinib, osimertinib and the investigational inhibitor KP2187.

PubMed

Dömötör, Orsolya; Pelivan, Karla; Borics, Attila; Keppler, Bernhard K; Kowol, Christian R; Enyedy, Éva A

2018-05-30

Binding interactions between human serum albumin (HSA) and four approved epidermal growth factor receptor (EGFR) inhibitors gefitinib (GEF), erlotinib (ERL), afatinib (AFA), osimertinib (OSI), as well as the experimental drug KP2187, were investigated by means of spectrofluorometric and molecular modelling methods. Steady-state and time resolved spectrofluorometric techniques were carried out, including direct quenching of protein fluorescence and site marker displacement measurements. Proton dissociation processes and solvent dependent fluorescence properties were investigated as well. The EGFR inhibitors were predominantly presented in their single protonated form (HL + ) at physiological pH except ERL, which is charge-neutral. Significant solvent dependent fluorescence properties were found for GEF, ERL and KP2187, namely their emission spectra show strong dependence on the polarity and the hydrogen bonding ability of the solvents. The inhibitors proved to be bound at site I of HSA (in subdomain IIA) in a weak-to-moderate fashion (logK' 3.9-4.9) using spectrofluorometry. OSI (logK' 4.3) and KP2187 can additionally bind in site II (in subdomain IIIA), while GEF, ERL and AFA clearly show no interaction here. Docking methods qualitatively confirmed binding site preferences of compounds GEF and KP2187, and indicated that they probably bind to HSA in their neutral forms. Binding constants calculated on the basis of the various experimental data indicate a weak-to-moderate binding on HSA, only OSI exhibits somewhat higher affinity towards this protein. However, model calculations performed at physiological blood concentrations of HSA resulted in high (ca. 90%) bound fractions for the inhibitors, highlighting the importance of plasma protein binding. Copyright © 2018 Elsevier B.V. All rights reserved.

Compensating effect of the coherent synchrotron radiation in bunch compressors

NASA Astrophysics Data System (ADS)

Jing, Yichao; Hao, Yue; Litvinenko, Vladimir N.

2013-06-01

Typical bunch compression for a high-gain free-electron laser (FEL) requires a large compression ratio. Frequently, this compression is distributed in multiple stages along the beam transport line. However, for a high-gain FEL driven by an energy recovery linac (ERL), compression must be accomplished in a single strong compressor located at the beam line’s end; otherwise the electron beam would be affected severely by coherent synchrotron radiation (CSR) in the ERL’s arcs. In such a scheme, the CSR originating from the strong compressors could greatly degrade the quality of the electron beam. In this paper, we present our design for a bunch compressor that will limit the effect of CSR on the e-beam’s quality. We discuss our findings from a study of such a compressor, and detail its potential for an FEL driven by a multipass ERL developed for the electron-Relativistic Heavy Ion Collider.

Clinical evaluation of an Er:YAG laser for nonsurgical treatment of peri-implantitis: a pilot study.

PubMed

Schwarz, Frank; Sculean, Anton; Rothamel, Daniel; Schwenzer, Katja; Georg, Thomas; Becker, Jürgen

2005-02-01

The aim of this controlled, parallel design clinical study was to compare the effectiveness of an Er:YAG laser (ERL) to that of mechanical debridement using plastic curettes and antiseptic therapy for nonsurgical treatment of peri-implantitis. Twenty patients with moderate to advanced peri-implantitis lesions were randomly treated with either (1) an ERL using a cone-shaped glass fiber tip at an energy setting of 100 mJ/pulse and 10 pps (ERL), or (2) mechanical debridement using plastic curettes and antiseptic therapy with chlorhexidine digluconate (0.2%) (C). The following clinical parameters were measured at baseline, 3 and 6 months after treatment by one blinded and calibrated examiner: Plaque index (PI), bleeding on probing (BOP), probing depth (PD), gingival recession (GR) and clinical attachment level (CAL). At the baseline examination, there were no statistically significant differences in any of the investigated parameters. Mean value of BOP decreased in the ERL group from 83% at baseline to 31% after 6 months (P < 0.001) and in the C group from 80% at baseline to 58% after 6 months (P < 0.001). The difference between the two groups was statistically significant (P < 0.001, respectively). The sites treated with ERL demonstrated a mean CAL change from 5.8 +/- 1 mm at baseline to 5.1 +/- 1.1 mm (P < 0.01) after 6 months. The C sites demonstrated a mean CAL change from 6.2 +/- 1.5 mm at baseline to 5.6 +/- 1.6 mm (P < 0.001) after 6 months. After 6 months, the difference between the two groups was statistically not significant (P > 0.05). Within the limits of the present study, it was concluded that (i) at 6 months following treatment both therapies led to significant improvements of the investigated clinical parameters, and (ii) ERL resulted in a statistically significant higher reduction of BOP than C.

Transformation of Beauveria bassiana to produce EGFP in Tenebrio molitor for use as animal feed additives.

PubMed

Kim, Jae Su; Choi, Jae Young; Lee, Se Jin; Lee, Ju Hyun; Fu, Zhenli; Skinner, Margaret; Parker, Bruce L; Je, Yeon Ho

2013-07-01

Efforts are underway to develop more effective and safer animal feed additives. Entomopathogenic fungi can be considered practical expression platforms of functional genes within insects which have been used as animal feed additives. In this work, as a model, the enhanced green fluorescent protein (egfp) gene was expressed in yellow mealworms, Tenebrio molitor by highly infective Beauveria bassiana ERL1170. Among seven test isolates, ERL1170 treatment showed 57.1% and 98.3% mortality of mealworms 2 and 5 days after infection, respectively. The fungal transformation vector, pABeG containing the egfp gene, was inserted into the genomic DNA of ERL1170 using the restriction enzyme-mediated integration method. This resulted in the generation of the transformant, Bb-egfp#3, which showed the highest level of fluorescence. Bb-egfp#3-treated mealworms gradually turned dark brown, and in 7-days mealworm sections showed a strong fluorescence. This did not occur in the wild-type strain. This work suggests that further valuable proteins can be efficiently produced in this mealworm-based fungal expression platform, thereby increasing the value of mealworms in the animal feed additive industry. © 2013 Federation of European Microbiological Societies. Published by John Wiley & Sons Ltd. All rights reserved.

The influence of recrystallized caffeine on water-swellable polymethacrylate mucoadhesive buccal films.

PubMed

Morales, Javier O; Su, Rong; McConville, Jason T

2013-06-01

The aim of this work was to investigate the influence of particles on the properties of polymethacrylate films intended for buccal delivery. A solvent casting method was used with Eudragit RS and RL (ERS and ERL, respectively) as film-forming rate-controlling polymers, with caffeine as a water-soluble model drug. The physicochemical properties of the model films for a series of formulations with increasing concentrations of caffeine were determined in terms of morphology, mechanical and mucoadhesive properties, drug content uniformity, and drug release and associated kinetics. Typically regarded as non-mucoadhesive polymers, ERS and mainly ERL, were found to be good mucoadhesives, with ERL01 exhibiting a work of mucoadhesion (WoA) of 118.9 μJ, which was about five to six times higher than that observed for commonly used mucoadhesives such as Carbopol(®) 974P (C974P, 23.9 μJ) and polycarbophil (PCP, 17.4 μJ). The mucoadhesive force for ERL01 was found to be significantly lower yet comparable to C974P and PCP films (211.1 vs. 329.7 and 301.1 mN, respectively). Inspection of cross-sections of the films indicated that increasing the concentration of caffeine was correlated with the appearance of recrystallized agglomerates. In conclusion, caffeine agglomerates had detrimental effects in terms of mucoadhesion, mechanical properties, uniformity, and drug release at large particle sizes. ERL series of films exhibited very rapid release of caffeine while ERS series showed controlled release. Analysis of release profiles revealed that kinetics changed from a diffusion controlled to a first-order release mechanism.

Freshwater findings, 1979-1982: research publications of the Environmental Research Laboratory, Duluth, Minnesota

DOE Office of Scientific and Technical Information (OSTI.GOV)

Highland, T.; Curtis, C.

1983-10-01

This report contains citations of publications for the years 1979-1982 on research conducted or supported by the Environmental Research Laboratory-Duluth. All published material has been organized into two major categories: (1) Journal Articles, Book Chapters, Proceedings, etc., and (2) EPA Research Reports. The report is organized by year with all journal articles, book chapters, proceedings, etc., for a given year appearing before the EPA research reports for the same year; within each category publications are listed alphabetically by author. Authors of the publications listed include ERL-Duluth laboratory staff members and scientists at universities, in industry, and at other facilities whomore » received research funding under the auspices of the Environmental Research Laboratory-Duluth. Limited quantities of reprints are available for those articles identified by ERL-Duluth reprint number in parentheses following the citation. These can be obtained by writing to: Librarian, ERL-Duluth, U.S. EPA, 6201 Congdon Boulevard, Duluth, MN 55804. EPA research reports can be obtained by writing to: National Technical Information Service, 5285 Port Royal Road, Springfield, VA 22151. All other articles are not available from ERL-Duluth or NTIS, but can be found in most major libraries.« less

Ultrafast harmonic rf kicker design and beam dynamics analysis for an energy recovery linac based electron circulator cooler ring

DOE PAGES

Huang, Yulu; Wang, Haipeng; Rimmer, Robert A.; ...

2016-08-01

An ultrafast kicker system is being developed for the energy recovery linac (ERL) based electron circulator cooler ring (CCR) in the proposed Jefferson Lab Electron Ion Collider (JLEIC, previously named MEIC). In the CCR, the injected electron bunches can be recirculated while performing ion cooling for 10–30 turns before the extraction, thus reducing the recirculation beam current in the ERL to 1/10–1/30 (150mA–50 mA) of the cooling beam current (up to 1.5 A). Assuming a bunch repetition rate of 476.3 MHz and a recirculating factor of 10 in the CCR, the kicker is required to operate at a pulse repetitionmore » rate of 47.63 MHz with pulse width of around 2 ns, so that only every 10th bunch in the CCR will experience a transverse kick while the rest of the bunches will not be disturbed. Such a kicker pulse can be synthesized by ten harmonic modes of the 47.63 MHz kicker pulse repetition frequency, using up to four quarter wavelength resonator (QWR) based deflecting cavities. In this paper, several methods to synthesize such a kicker waveform will be discussed and a comparison of their beam dynamics performance is made using ELEGANT. Four QWR cavities are envisaged with high transverse shunt impedance requiring less than 100 W of total rf power for a Flat-Top kick pulse. Multipole fields due to the asymmetry of this type of cavity are analyzed. The transverse emittance growth due to the sextupole component is simulated in ELEGANT. In conclusion, off-axis injection and extraction issues and beam optics using a multicavity kick-drift scheme will also be discussed.« less

Ultrafast harmonic rf kicker design and beam dynamics analysis for an energy recovery linac based electron circulator cooler ring

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Yulu; Wang, Haipeng; Rimmer, Robert A.

An ultrafast kicker system is being developed for the energy recovery linac (ERL) based electron circulator cooler ring (CCR) in the proposed Jefferson Lab Electron Ion Collider (JLEIC, previously named MEIC). In the CCR, the injected electron bunches can be recirculated while performing ion cooling for 10–30 turns before the extraction, thus reducing the recirculation beam current in the ERL to 1/10–1/30 (150mA–50 mA) of the cooling beam current (up to 1.5 A). Assuming a bunch repetition rate of 476.3 MHz and a recirculating factor of 10 in the CCR, the kicker is required to operate at a pulse repetitionmore » rate of 47.63 MHz with pulse width of around 2 ns, so that only every 10th bunch in the CCR will experience a transverse kick while the rest of the bunches will not be disturbed. Such a kicker pulse can be synthesized by ten harmonic modes of the 47.63 MHz kicker pulse repetition frequency, using up to four quarter wavelength resonator (QWR) based deflecting cavities. In this paper, several methods to synthesize such a kicker waveform will be discussed and a comparison of their beam dynamics performance is made using ELEGANT. Four QWR cavities are envisaged with high transverse shunt impedance requiring less than 100 W of total rf power for a Flat-Top kick pulse. Multipole fields due to the asymmetry of this type of cavity are analyzed. The transverse emittance growth due to the sextupole component is simulated in ELEGANT. In conclusion, off-axis injection and extraction issues and beam optics using a multicavity kick-drift scheme will also be discussed.« less

Interaction of two diclofenac acid salts with copolymers of ammoniomethacrylate: effect of additives and release profiles.

PubMed

Khalil, E; Sallam, A

1999-04-01

The copolymer of ammoniomethacrylate Eudragit RL (ERL) interacted with diclofenac acid salts (sodium and diethylamine salts) in aqueous solutions, forming a complex. Sorption experiments were done in aqueous solutions of either sodium lauryl sulfate (SLS), Tween 20, or Tween 80. The SLS competed strongly with the drug, even at low concentrations, and reduced significantly the amount of drug sorbed by ERL. Tweens at high concentrations exhibited two phase profiles: the sorption phase, which was short and during which drug concentration dropped sharply, and the release phase, during which the drug was released slowly over 24 hr and which was accompanied by dispersion of ERL particles into the colloidal dispersion. The interaction was dependent on temperature, ionic strength, and nature of the additives. The extent of interaction in water and phosphate buffer solutions was in the following order: water > pH 6 > pH 7-8. In-vitro dissolution studies of the dried complex were done over 24 hr. In water, the drug remained bound to the polymer. In aqueous surfactant solutions (SLS, Tween 20, and Tween 80) and phosphate buffer at pH 6.8, a linear relationship between drug concentration and the square root of time was obtained, indicating a matrix diffusion-controlled mechanism. However, 100% release was not reached, and resorption was observed in the phosphate buffer solution.

Production of antibacterial Bombyx mori cecropin A in mealworm-pathogenic Beauveria bassiana ERL1170.

PubMed

Lee, Se Jin; Yu, Jeong Seon; Parker, Bruce L; Skinner, Margaret; Je, Yeon Ho; Kim, Jae Su

2015-01-01

Efforts are underway to produce antimicrobial peptides in yellow mealworms (Tenebrio molitor), which can be developed as more effective and safer animal feed additives. In this work, we expressed Bombyx mori (Bm) cecropin-A in mealworms by the infection of transformed entomopathogenic Beauveria bassiana ERL1170. The active domain of Bm cecropin A gene was tagged with a signal sequence of B. bassiana for extracellular secretion, and the fragment was inserted into ERL1170 by the restriction enzyme-mediated integration method. Transformant D-6 showed antibacterial activity against Bacillus subtilis and Listeria monocytogenes. Against T. molitor larvae, D-6 had similar mortality to wild-type, and D6-infected mealworm suspension showed strong antibacterial activity against the two bacteria, but not in the wild-type-infected mealworms, thereby increasing the value of mealworms as animal feed additives.

The Coast Artillery Journal. Volume 61, Number 3, September 1924

DTIC Science & Technology

1924-09-01

8217ild ""est, it was considered proper to shoot any gambler caught cheating at cards. Horse thieves were hanged without mercy. Fair play was demanded...rlo."ely uffiliuted u"’ill unt"u:n>l"(Jft e.rl’er:l1Ientul tl’orl..- in the Const Artillery fur tile PWoit .~ererul yenr.". ( Iud JUIS w:tlle.o;.:sed the

Beam-dynamics driven design of the LHeC energy-recovery linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pellegrini, Dario; Latina, Andrea; Schulte, Daniel

The LHeC study is a possible upgrade of the LHC that aims at delivering an electron beam for collisions with the existing hadronic beams. The current baseline design for the electron facility consists of a multi-pass superconducting energy-recovery linac operating in a continuous wave mode. Here, we summarize the overall layout of such ERL complex located on the LHC site and introduce the most recent developments. We review of the lattice components, presenting their baseline design along with possible alternatives that aims at improving the overall machine performance. The detector bypass has been designed and integrated into the lattice. Trackingmore » simulations allowed us to verify the high current (~150 mA in the linacs) beam operation required for the LHeC to serve as an Higgs Factory. The impact of single and multi-bunch wake-fields, synchrotron radiation and beam-beam effects has been assessed in this paper.« less

Beam-dynamics driven design of the LHeC energy-recovery linac

DOE PAGES

Pellegrini, Dario; Latina, Andrea; Schulte, Daniel; ...

2015-12-23

The LHeC study is a possible upgrade of the LHC that aims at delivering an electron beam for collisions with the existing hadronic beams. The current baseline design for the electron facility consists of a multi-pass superconducting energy-recovery linac operating in a continuous wave mode. Here, we summarize the overall layout of such ERL complex located on the LHC site and introduce the most recent developments. We review of the lattice components, presenting their baseline design along with possible alternatives that aims at improving the overall machine performance. The detector bypass has been designed and integrated into the lattice. Trackingmore » simulations allowed us to verify the high current (~150 mA in the linacs) beam operation required for the LHeC to serve as an Higgs Factory. The impact of single and multi-bunch wake-fields, synchrotron radiation and beam-beam effects has been assessed in this paper.« less

A wire scanner system for characterizing the BNL energy recovery LINAC beam position monitor system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michnoff R.; Biscardi, C.; Cerniglia, P.

2012-04-15

A stepper motor controlled wire scanner system has recently been modified to support testing of the Brookhaven National Laboratory (BNL) Collider-Accelerator department's Energy Recovery Linac (ERL) beam position monitor (BPM) system. The ERL BPM consists of four 9.33 mm diameter buttons mounted at 90 degree spacing in a cube with 1.875 inch inside diameter. The buttons were designed by BNL and fabricated by Times Microwave Systems. Libera brilliance single pass BPM electronic modules with 700 MHz bandpass filter, manufactured by Instrumentation Technologies, will be used to measure the transverse beam positions at 14 locations around the ERL. The wire scannermore » assembly provides the ability to measure the BPM button response to a pulsed wire, and evaluate and calibrate the Libera position measurement electronics. A description of the wire scanner system and test result data will be presented.« less

Complexity and interdisciplinary approaches to environmental research

NASA Astrophysics Data System (ADS)

Kammen, Daniel M.

2013-03-01

The launch of volume 8 of Environmental Research Letters (ERL) comes at a critical time in terms of innovations and exciting areas of science, but particularly in the areas linking environmental research and action. The most recent climate change Conference of the Parties meeting (COP), in Doha in December 2012, has now come and gone. As has been dissected in the press, very little was accomplished. Some will see this as a failure, as I do, and others will reasonably enough note that this meeting, the 18th such COP was1 never intended to be a milestone moment. The current plan, in fact, is for a 'post-Kyoto' international climate agreement to be adopted only at the COP20 summit in December 2015. As we lead up to COP20, and potentially other regional or national approaches to climate protection, innovations in science, innovations in policy tools, and political commitment must come together. The science of climate change only continues to get clearer and clearer, and bleaker [1]. Later this year the IPCC will release its Fifth Assessment Report, AR5. The draft versions are out for review now. ERL has published a number of papers on climate change science, mitigation and adaptation, but one area where the world needs a particular focus is on the nexus of science and action. A summary of the Intergovernmental Panel on Climate Change's findings from the first assessment report (FAR; 1990) to the latest report is presented in figure 1. This graphic is specifically not about the scientific record alone. What is most important about this figure is the juxtaposition of the language of science and the language of ... language. Figure 1. Figure 1. A superposition of the state of climate science in three key data sets, and the dates of the first, second, third and fourth assessment reports (FAR, SAR, TAR, and AR4, respectively) plotted as vertical lines. On the right are the key statements from each of these reports, along with the conclusion of the Special Report on Renewable Energy (SRREN, completed in 2011) which found that up to an 80% decarbonization of the global economy was possible if we can enable and launch a large-scale transition to a clean energy system consistent with what a number of 'leading edge' cities, regions, and nations have already accomplished or started. Note, in particular, that as the physical climate change metrics have progressed, the words—shown on the right—have also progressed. In 1990, at the time of the FAR the strongest scientific consensus statement was that another decade of data would likely be needed to clearly observe climate change. Through the second to fourth (SAR, TAR, and AR4) reports, increasing clarity on the science of climate change translated into a consensus of overwhelming blame on human activities. The key statements from each report are not only about the growing evidence for anthropogenically driven climate change, but they have moved into the ecological and social impacts of this change. AR4 critically concluded that climate change would lead to climate injustice as the poor, globally, bear the brunt of the impacts. Despite this 'Rosetta Stone' translating science to language, we have failed to act collectively. One area where ERL can advance the overall conversation is on this science/action interface. As AR5 emerges, the climate change/climate response interface will need deep, substantive, action that responds rapidly to new ideas and opportunities. The rapid publication and open access features of ERL are particularly critical here as events a such as Hurricane Sandy, economic or political advances in climate response made by cities, regions or nations, all warrant assessment and response. This is one of many areas where ERL has been at the forefront of the conversation, through not only research letters, but also commentary-style Perspective pieces and the conversation that ERL's sister community website environmentalresearchweb can facilitate. This process of translating proposed solutions—innovations—between interest groups, has been in far too short supply recently. One promising example has been the science/action dialog between a leading climate research center and the World Bank [2]. 'The Earth system's responses to climate change appear to be non-linear', points out Potsdam Institute for Climate Impact Research (PIK) Director, John Schellnhuber. 'If we venture far beyond the 2° guardrail, towards the 4° line, the risk of crossing tipping points rises sharply. The only way to avoid this is to break the business-as-usual pattern of production and consumption'. This assessment came in a report on climate science commissioned by the World Bank. Dr Jim Yong Kim, president of the World Bank noted succinctly and critically that: '... most importantly, a 4 °C world is so different from the current one that it comes with high uncertainty and new risks that threaten our ability to anticipate and plan for future adaptation needs.' This statement warrants careful discussion. Not only is World Bank President Kim affirming the results of the PIK study, and by direct extension the IPCC (because the same authors at PIK are also central to the work of the IPCC), but he is clearly noting that while many climate analysts rightly talk about the need to not exceed a 2° temperature increase, the path the world is currently on, namely 4°-6° will be catastrophic. This may come as too soft a statement to many in the scientific community, but it opens the door to an increasingly detailed dialog between climate change science and agencies engaged in action. Where ERL and other outlets for this conversation can play a critical role is in the many dimensions of climate change and response. The story is far from one only at the global level. As http://climatehotmap.org and many other location specific assessments detail, the environmental change story is playing out in millions of critical cases. Each warrants reporting and action, as well as integration with assessments of current data gathering and 'big data' needs, and with wider socioeconomic questions of effective political, and policy response. Through that, dialog papers in ERL will be critically important to advancing not only climate science, but the interactive dialog between knowledge and action. References [1] Hansen J, Sato M and Ruedy R 2012 Perception of climate change Proc. Natl Acad. Sci. USA 109 E2415-23 [2] Potsdam Institute for Climate Impact 2013 Turn Down the Heat: Why a 4 °C Warmer World Must be Avoided (Washington, DC: The World Bank) 1 The Kyoto Protocol was adopted on 11 December 1997 in Kyoto, Japan, and entered into force on 16 February 2005. As of September 2011, 191 states have signed and ratified the protocol. The United States signed but did not ratify the Protocol and Canada withdrew from it in 2011.

Surface-Enhanced Raman Scattering (SERS) for Detection in Immunoassays. Applications, fundamentals, and optimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Driskell, Jeremy Daniel

2006-08-09

Immunoassays have been utilized for the detection of biological analytes for several decades. Many formats and detection strategies have been explored, each having unique advantages and disadvantages. More recently, surface-enhanced Raman scattering (SERS) has been introduced as a readout method for immunoassays, and has shown great potential to meet many key analytical figures of merit. This technology is in its infancy and this dissertation explores the diversity of this method as well as the mechanism responsible for surface enhancement. Approaches to reduce assay times are also investigated. Implementing the knowledge gained from these studies will lead to a more sensitivemore » immunoassay requiring less time than its predecessors. This dissertation is organized into six sections. The first section includes a literature review of the previous work that led to this dissertation. A general overview of the different approaches to immunoassays is given, outlining the strengths and weaknesses of each. Included is a detailed review of binding kinetics, which is central for decreasing assay times. Next, the theoretical underpinnings of SERS is reviewed at its current level of understanding. Past work has argued that surface plasmon resonance (SPR) of the enhancing substrate influences the SERS signal; therefore, the SPR of the extrinsic Raman labels (ERLs) utilized in our SERS-based immunoassay is discussed. Four original research chapters follow the Introduction, each presented as separate manuscripts. Chapter 2 modifies a SERS-based immunoassay previously developed in our group, extending it to the low-level detection of viral pathogens and demonstrating its versatility in terms of analyte type, Chapter 3 investigates the influence of ERL size, material composition, and separation distance between the ERLs and capture substrate on the SERS signal. This chapter links SPR with SERS enhancement factors and is consistent with many of the results from theoretical treatments of SPR and SERS. Chapter 4 introduces a novel method of reducing sample incubation time via capture substrate rotation. Moreover, this work led to a method of virus quantification without the use of standards. Chapter 5 extends the methodology developed in Chapter 4 to both the antigen and ERL labeling step to perform assays with improved analytical performance in less time than can be accomplished in diffusion controlled assays. This dissertation concludes with a general summary and speculates on the future of this exciting approach to carrying out immunoassays.« less

A Compact Bulk Acousto-Optic Time Integrating Correlator.

DTIC Science & Technology

1984-11-01

AD-A156 668 A COMPACT BULK ACOUSTO - OPTIC TIME INTEGRATING 1/1 CORRELATOR(U) ELECTRONICS RESEARCH LAB ADELAIDE (AUSTRALIA) D A FOGG NOV 84 ERL-9323-TR...DEFENCE RESEARCH CENTRE SALISBURY SOUTH AUSTRALIA TECHNICAL REPORT ER L-0323-TR A COMPACT BULK ACOUSTO - OPTIC TIME INTEGRATING CORRELATOR D.A.B. FOGG...LABORATORY TECHNICAL REPORT ERL-0323-TR A COMPACT BULK ACOUSTO - OPTIC TIME INTEGRATING CORRELATOR D.A.B. Fogg SUMMARY This report describes the design and

Electron linac for medical isotope production with improved energy efficiency and isotope recovery

DOEpatents

Noonan, John; Walters, Dean; Virgo, Matt; Lewellen, John

2015-09-08

A method and isotope linac system are provided for producing radio-isotopes and for recovering isotopes. The isotope linac is an energy recovery linac (ERL) with an electron beam being transmitted through an isotope-producing target. The electron beam energy is recollected and re-injected into an accelerating structure. The ERL provides improved efficiency with reduced power requirements and provides improved thermal management of an isotope target and an electron-to-x-ray converter.

Is the microplastic selective according to the habitat? Records in amphioxus sands, Mäerl bed habitats and Cymodocea nodosa habitats.

PubMed

Renzi, Monia; Blašković, Andrea; Fastelli, Paolo; Marcelli, Massimiliano; Guerranti, Cristiana; Cannas, Susanna; Barone, Lorenzo; Massara, Francesca

2018-05-01

This study estimated for the first time the total loads of plastic litter (macro- meso- and micro-plastics) in sediments of different habitat types from the Northern Adriatic Sea. Samples were collected in March 2016. The sampling sites were settled in shoreline, on the C. nodosa bottoms, Amphioxus sands, and Mäerl bed habitats. Microplastics items were present in all sampling site and ranging within 137-703 items/kg d.w. from Mäerl bed habitat to the shoreline. In C. nodosa bottoms 170 items/kg d.w. were found, while in Amphioxus sands were recorded on average 194 items/kg d.w. Due to the absence of statistical associations among litter levels and abundance of B. lanceolatum in the study area, this research present the needs to develop a new method and more research to for the evaluation of how much the interrelation between sensible habitats and microplastic exist. Copyright © 2018 Elsevier Ltd. All rights reserved.

Learning How To Learn: An Affective Curriculum for Students at Risk of Dropping Out of School.

ERIC Educational Resources Information Center

Turner, Thom

Environmental Readiness Learning (ERL) is the affective curriculum component developed by the Bedford Stuyvesant Street Academy (New York) to improve the behavior, academic achievement, and self-esteem of urban high school students with histories of prior school failure. The program design reflects the school's philosophy that educational success…

Why Is Externally-Facilitated Regulated Learning More Effective than Self-Regulated Learning with Hypermedia?

ERIC Educational Resources Information Center

Azevedo, Roger; Moos, Daniel C.; Greene, Jeffrey A.; Winters, Fielding I.; Cromley, Jennifer G.

2008-01-01

We examined how self-regulated learning (SRL) and externally-facilitated self-regulated learning (ERL) differentially affected adolescents' learning about the circulatory system while using hypermedia. A total of 128 middle-school and high school students with little prior knowledge of the topic were randomly assigned to either the SRL or ERL…

Assessment of metal contamination in coastal sediments of Al-Khobar area, Arabian Gulf, Saudi Arabia

NASA Astrophysics Data System (ADS)

Alharbi, Talal; El-Sorogy, Abdelbaset

2017-05-01

An assessment of marine pollution due to heavy metals was made to coastal sediments collected from Al-Khobar coastline, in the Arabian Gulf, Saudi Arabia by analyzing of Al, V, Cr, Mn, Cu, Zn, Cd, Pb, Hg, Mo, Sr, Se, As, Fe, Co and Ni using Inductively Coupled Plasma-Mass Spectrometer (ICP-MS). The results indicated that the distribution of most metals was largely controlled by inputs of terrigenous material and most strongly associated with distribution of Al in sediments. In general Sr, Cr, Zn, Cu, V, Hg, Mo and Se show severe enrichment factors. Average values of Cu and Hg highly exceed the ERL and the Canadian ISQG values. Average Ni was higher than the ERL and the ERM values. The severe enrichment of some metals in the studied sediment could be partially attributed to anthropogenic activities, notably oil spills from exploration, transportation and from saline water desalination plants in Al-Khobar coast, and other industrial activities in the region.

Contralateral cortical organisation of information in visual short-term memory: evidence from lateralized brain activity during retrieval.

PubMed

Fortier-Gauthier, Ulysse; Moffat, Nicolas; Dell'Acqua, Roberto; McDonald, John J; Jolicœur, Pierre

2012-07-01

We studied brain activity during retention and retrieval phases of two visual short-term memory (VSTM) experiments. Experiment 1 used a balanced memory array, with one color stimulus in each hemifield, followed by a retention interval and a central probe, at the fixation point that designated the target stimulus in memory about which to make a determination of orientation. Retrieval of information from VSTM was associated with an event-related lateralization (ERL) with a contralateral negativity relative to the visual field from which the probed stimulus was originally encoded, suggesting a lateralized organization of VSTM. The scalp distribution of the retrieval ERL was more anterior than what is usually associated with simple maintenance activity, which is consistent with the involvement of different brain structures for these distinct visual memory mechanisms. Experiment 2 was like Experiment 1, but used an unbalanced memory array consisting of one lateral color stimulus in a hemifield and one color stimulus on the vertical mid-line. This design enabled us to separate lateralized activity related to target retrieval from distractor processing. Target retrieval was found to generate a negative-going ERL at electrode sites found in Experiment 1, and suggested representations were retrieved from anterior cortical structures. Distractor processing elicited a positive-going ERL at posterior electrodes sites, which could be indicative of a return to baseline of retention activity for the discarded memory of the now-irrelevant stimulus, or an active inhibition mechanism mediating distractor suppression. Copyright © 2012 Elsevier Ltd. All rights reserved.

Design Concept for a Compact ERL to Drive a VUV/Soft X-Ray FEL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christopher Tennant ,David Douglas

2011-03-01

We explore possible upgrades of the existing Jefferson Laboratory IR/UV FEL driver to higher electron beam energy and shorter wavelength through use of multipass recirculation to drive an amplifier FEL. The system would require beam energy at the wiggler of 600 MeV with 1 mA of average current. The system must generate a high brightness beam, configure it appropriately, and preserve beam quality through the acceleration cycle ? including multiple recirculations ? and appropriately manage the phase space during energy recovery. The paper will discuss preliminary design analysis of the longitudinal match, space charge effects in the linac, and recirculatormore » design issues, including the potential for the microbunching instability. A design concept for the low energy recirculator and an emittance preserving lattice solution will be presented.« less

Cornell-BNL Electron Energy Recovery Linac FFAG Test Accelerator (CBETA)

NASA Astrophysics Data System (ADS)

Trbojevic, Dejan; Peggs, Steve; Berg, Scott; Brooks, Stephen; Mahler, George; Meot, Francois; Tsoupas, Nicholaos; Witte, Holger; Hoffstaetter, Georg; Bazarov, Ivan; Mayes, Christopher; Patterson, Ritchie; Smolenski, Karl; Li, Yulin; Dobbins, John; BNL Team; Cornell University Team

A novel energy recovery linac (ERL) with Non-Scaling Fixed Field Alternating Gradient (NS-FFAG) racetrack is being constructed as a result of collaboration of the Cornell University with Brookhaven National Laboratory. The existing injector and superconducting linac at Cornell University are being installed together with a single NS-FFAG arcs and straight section at the opposite side of the linac to form an ERL system. The 6 MeV electron beam from injector is transferred into the 36 MeV superconducting linac and accelerated by four successive passes: from 42 to 150 MeV using the same NS-FFAG structure made of permanent magnets. After the maximum energy of 150 MeV is reached, the electron beam is brought back to the linac with opposite Radio Frequency (RF) phase and with 4 passes electron energy is recovered and brought back to the initial energy of 6 MeV. This is going to be the first 4 pass superconducting ERL and the first NS-FFAG permanent magnet structure to bring the electron beam back to the linac.

Metal concentrations in sediments from tourist beaches of Miri City, Sarawak, Malaysia (Borneo Island).

PubMed

Nagarajan, R; Jonathan, M P; Roy, Priyadarsi D; Wai-Hwa, L; Prasanna, M V; Sarkar, S K; Navarrete-López, M

2013-08-15

Forty-three sediment samples were collected from the beaches of Miri City, Sarawak, Malaysia to identify the enrichment of partially leached trace metals (PLTMs) from six different tourist beaches. The samples were analyzed for PLTMs Fe, Mn, Cr, Co, Cu, Ni, Pb, Sr and Zn. The concentration pattern suggest that the southern side of the study area is enriched with Fe (1821-6097 μg g(-1)), Mn (11.57-90.22 μg g(-1)), Cr (51.50-311 μg g(-1)), Ni (18-51 μg g(-1)), Pb (8.81-84.05 μg g(-1)), Sr (25.95-140.49 μg g(-1)) and Zn (12.46-35.04 μg g(-1)). Compared to the eco-toxicological values, Cr>Effects range low (ERL), Lowest effect level (LEL), Severe effect level (SEL); Cu>Unpolluted sediments, ERL, LEL; Pb>Unpolluted sediments and Ni>ERL and LEL. Comparative results with other regions indicate that Co, Cr, Cu, Ni and Zn are higher, indicating an external input rather than natural process. Copyright © 2013 Elsevier Ltd. All rights reserved.

Manual for ERLE (Energy-Related Laboratory Equipment). Instructions and information for institutions of higher learning concerning used energy-related laboratory equipment grants; Manual para ERLE [Equipo de Laboratorio Relacionado con la Energia]. Instrucciones e informacion para instituciones de educacion superior sobre subvenciones de equipo de laboratorio usado relacionado con la energia (in Spanish)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-10-01

This is a listing of energy related equipment available through the Energy-Related Laboratory Equipment Grant Program which grants used equipment to institutions of higher education for energy-related research. Information included is an overview of the program, how to apply for a grant of equipment, eligibility requirements, types of equipment available, and the costs for the institution.

Locating the Source of Long-Distance Radio Distress Signals from the Southern Ocean

DTIC Science & Technology

1988-03-01

fomZwaic ad e(91) Ref t ~) areshown -39 - ERL-0449-SD 30 EQU IV ALE N T GEOGRAPHIC LATITUDE (DEG), S. j ~jj5"f RN HEMISPHERE, AT LONGITUDE OF ADELAIDE...45 - ERL-0449-SD AST = 48 ASB = 61 - 0.5(Kp - i) ANB = 73 - 1.0(Kp- ) ANT = 76 - 1.25(Kp - j ) where A represents invariant latitude, the subscripts T ...frequency (MF) maritime band (410-512 kHz) for long-distance commun- cation in telegraphy (Morse code) at a frequency which was returned t the earth by

Ecological and health risk-based characterization of agricultural soils contaminated with polycyclic aromatic hydrocarbons in the vicinity of a chemical plant in China.

PubMed

Liu, Geng; Niu, Junjie; Guo, Wenjiong; An, Xiangsheng; Zhao, Long

2016-11-01

Polycyclic aromatic hydrocarbons (PAHs) from chemical plants can cause serious pollution of surrounding agricultural soils. A comprehensive study of agricultural soils was conducted in the vicinity of a chemical plant in China to characterize the soil PAH concentration, as well as their composition and sources. Human health and a screening-level ecological risk assessment were conducted for PAH contamination in agricultural soils. The results showed that the total concentrations of 16 priority PAHs ranged from 250.49 to 9387.26 ng g(-1), with an average of 2780.42 ng g(-1). High molecular weight PAHs (four to six rings) were the dominant component, accounting for more than 60% of all PAHs. Principal component analysis (PCA) and positive matrix factorization model (PMF) suggested that diesel emissions, coal combustion, coke ovens, and fuel combustion and gasoline emissions were the main sources of PAHs in agricultural soils. The ecological risk assessment results based on the effects range-low (ERL), the effects range-median (ERM), and the ecological screening levels (ESL) indicated that the exposure to ∑PAH16 was >ERL, >ERM, and ≥ERL and ESL at 78.1% of the soil sampling stations, and could induce biological effects in mammals. The Bapeq concentrations posed a potential carcinogenic risk to humans. Further risk management and control of soil PAHs in these agricultural soils is required to ensure the safety of the biocoenosis and human health. Copyright © 2016 Elsevier Ltd. All rights reserved.

Doubling The Intensity Of An ERL Based Light Source

DOE Office of Scientific and Technical Information (OSTI.GOV)

Andrew Hutton

2005-05-01

A light source based on an Energy Recovered Linac (ERL) [1] consists of a superconducting linac and a transfer line that includes wigglers and undulators to produce the synchrotron light. The transfer line brings the electron bunches back to the beginning of the linac so that their energy can be recovered when they traverse the linac a second time, {lambda}/2 out of RF phase. There is another interesting condition when the length of the transfer line is (n {+-} 1/4) {lambda}. In this case, the electrons drift through on the zero RF crossing, and make a further pass around themore » transfer line, effectively doubling the circulating current in the wigglers and undulators. On the third pass through the linac, they will be decelerated and their energy recovered. The longitudinal focusing at the zero crossing is a problem, but it can be canceled if the drifting beam sees a positive energy gradient for the first half of the linac and a negative gradient for the second half (or vice versa). This paper presents a proposal to use a double chicane at the center of the linac to provide this focusing inversion for the drifting beam while leaving the accelerating and decelerating beams on crest. [1] G. R. Neil, et al, Phys. Rev. Let. 84, 662 2000« less

Harmonic Kicker RF Cavity for the Jefferson Lab Electron-Ion Collider EM Simulation, Modification, and Measurements

NASA Astrophysics Data System (ADS)

Overstreet, Sarah; Wang, Haipeng

2017-09-01

An important step in the conceptual design for the future Jefferson Lab Electron-Ion Collider (JLEIC) is the development of supporting technologies for the Energy Recovery Linac (ERL) Electron Cooling Facility. The Harmonic Radiofrequency (RF) kicker cavity is one such device that is responsible for switching electron bunches in and out of the Circulator Cooling Ring (CCR) from and to the ERL, which is a critical part of the ion cooling process. Last year, a half scale prototype of the JLEIC harmonic RF kicker model was designed with resonant frequencies to support the summation of 5 odd harmonics (95.26 MHz, 285.78 MHz, 476.30 MHz, 666.82 MHz, and 857.35 MHz); however, the asymmetry of the kicker cavity gives rise to multipole components of the electric field at the electron-beam axis of the cavity. Previous attempts to symmetrize the electric field of this asymmetrical RF cavity have been unsuccessful. The aim of this study is to modify the existing prototype for a uniform electric field across the beam pathway so that the electron bunches will experience nearly zero beam current loading. In addition to this, we have driven the unmodified cavity with the harmonic sum and used the wire stretching method for an analysis of the multipole electric field components.

Geodetic positioning of the Aerospace Electronics Research Lab (ERL) Osborne Time Transfer Receiver (TTR) using the GPS NAVSTAR Block I satellites

NASA Technical Reports Server (NTRS)

Liu, Anthony S.

1990-01-01

Aerospace has routinely processed the Osborne Time Transfer Receiver (TTR) data for the purpose of monitoring the performance of ground and GPS atomic clocks in near real-time with on-line residual displays and characterizing clock stability with Allan Variance calculations. Recently, Aerospace added the ability to estimate the TTR's location by differentially correcting the TTR's location in the WGS84 reference system. This new feature is exercised on a set of TTR clock phase data and Sub-meter accurate station location estimates of the TTR at the Aerospace Electronic Research Lab (ERL) are obtained.

MEIC electron cooling program

DOE PAGES

Derbenev, Yaroslav S.; Zhang, Yuhong

2014-12-01

Cooling of proton and ion beams is essential for achieving high luminosities (up to above 10 34 cm -2s -1) for MEIC, a Medium energy Electron-Ion Collider envisioned at JLab [1] for advanced nuclear science research. In the present conceptual design, we utilize the conventional election cooling method and adopted a multi-staged cooling scheme for reduction of and maintaining low beam emittances [2,3,4]. Two electron cooling facilities are required to support the scheme: one is a low energy (up to 2 MeV) DC cooler installed in the MEIC ion pre-booster (with the proton kinetic energy up to 3 GeV); themore » other is a high electron energy (up to 55 MeV) cooler in the collider ring (with the proton kinetic energy from 25 to 100 GeV). The high energy cooler, which is based on the ERL technology and a circulator ring, utilizes a bunched electron beam to cool bunched proton or ion beams. To complete the MEIC cooling concept and a technical design of the ERL cooler as well as to develop supporting technologies, an R&D program has been initiated at Jefferson Lab and significant progresses have been made since then. In this study, we present a brief description of the cooler design and a summary of the progress in this cooling R&D.« less

Study of application of remote sensing data to land use planning on the Mississippi gulf coast

NASA Technical Reports Server (NTRS)

Ingels, F. M. (Principal Investigator); Boyd, R. W.

1973-01-01

The author has identified the following significant results. This project is currently involved in making visits to state and county agencies to obtain their reactions and opinions to the Mississippi Gulf Coast ERTS-1 data. The data products being used in these interviews are produced by NASA/MTF-ERL and consist of computer plotted maps with eight classifications and a statistical summary in booklet form. Reaction by potential users has been very favorable, but cost will be the largely determining factor in their ability to utilize ERTS-1 data in a recurring manner.

Conidiogenesis-related DNA photolyase gene in Beauveria bassiana.

PubMed

Lee, Se Jin; Lee, Mi Rong; Kim, Sihyeon; Kim, Jong Cheol; Park, So Eun; Shin, Tae Young; Kim, Jae Su

2018-03-01

Beauveria bassiana is an entomopathogenic fungi used in environmentally mindful pest management. Its main active ingredient, conidia, is commercially available as a fungal biopesticide. Many studies of conidia production have focused on how to optimize culture conditions for maximum productivity and stability against unfavorable abiotic factors. However, understanding of how conidiogenesis-related genes provide improved conidial production remains unclear. In this study, we focus on identifying conidiogenesis-related genes in B. bassiana ERL1170 using a random mutagenesis technique. Transformation of ERL1170 using restriction enzyme-mediated integration generated one morphologically different transformant, ERL1170-pABeG #163. The transformant was confirmed to represent B. bassiana, and the binary vector was successfully integrated into the genome of ERL1170. Compared to the wild type, transformant #163 showed very slow hyphal growth and within 6 days only produced <1 × 10 6  conidia/0.28 cm 2 agar block (wild type: 6.2 × 10 7  conidia/agar block). Transformant #163 also exhibited different morphology than the wild type, including thicker hyphae with some club-shaped parts. In contrast, the typical morphology of wild type B. bassiana exhibits thread-like hyphae and conidiophore structures and circular conidia. To determine the location of the randomly inserted DNA, we conducted thermal asymmetric interlaced (TAIL) PCR and Escherichia coli cloning to clearly sequence the disrupted region. We identified one colony (colony No. 7) with an insertion site identified as DNA photolyase. This was confirmed through a gene knock-out study. It is possible the gene that encodes for DNA photolyase was disrupted during the insertion process and might be involved in fungal conidiogenesis. This work serves as a platform for exploring the function of a variety of B. bassiana genes involved in pest management and their downstream processing. Copyright © 2018 Elsevier Inc. All rights reserved.

Diverse roles of ERECTA family genes in plant development.

PubMed

Shpak, Elena D

2013-12-01

Multiple receptor-like kinases (RLKs) enable intercellular communication that coordinates growth and development of plant tissues. ERECTA family receptors (ERfs) are an ancient family of leucine-rich repeat RLKs that in Arabidopsis consists of three genes: ERECTA, ERL1, and ERL2. ERfs sense secreted cysteine-rich peptides from the EPF/EPFL family and transmit the signal through a MAP kinase cascade. This review discusses the functions of ERfs in stomata development, in regulation of longitudinal growth of aboveground organs, during reproductive development, and in the shoot apical meristem. In addition the role of ERECTA in plant responses to biotic and abiotic factors is examined. Elena D. Shpak (Corresponding author). © 2013 Institute of Botany, Chinese Academy of Sciences.

Formulation of Indomethacin Colon Targeted Delivery Systems Using Polysaccharides as Carriers by Applying Liquisolid Technique

PubMed Central

Elkhodairy, Kadria A.; Elsaghir, Hanna A.; Al-Subayiel, Amal M.

2014-01-01

The present study aimed at the formulation of matrix tablets for colon-specific drug delivery (CSDD) system of indomethacin (IDM) by applying liquisolid (LS) technique. A CSDD system based on time-dependent polymethacrylates and enzyme degradable polysaccharides was established. Eudragit RL 100 (E-RL 100) was employed as time-dependent polymer, whereas bacterial degradable polysaccharides were presented as LS systems loaded with the drug. Indomethacin-loaded LS systems were prepared using different polysaccharides, namely, guar gum (GG), pectin (PEC), and chitosan (CH), as carriers separately or in mixtures of different ratios of 1 : 3, 1 : 1, and 3 : 1. Liquisolid systems that displayed promising results concerning drug release rate in both pH 1.2 and pH 6.8 were compressed into tablets after the addition of the calculated amount of E-RL 100 and lubrication with magnesium stearate and talc in the ratio of 1 : 9. It was found that E-RL 100 improved the flowability and compressibility of all LS formulations. The release data revealed that all formulations succeeded to sustain drug release over a period of 24 hours. Stability study indicated that PEC-based LS system as well as its matrix tablets was stable over the period of storage (one year) and could provide a minimum shelf life of two years. PMID:24971345

A Comparative Study of Very High Burning Rate Materials - HIVELITE compositions 300511 and 300435

DTIC Science & Technology

1982-08-01

explosives and more or as sensitive as RDX and HMX . Thermal Sensitivity Differential Thermal Analysis/Thermogravimetric Analysis (DTA/TGA) Simultaneous...impact than Comp B end RDX but is less sensitive than lead azide. HIVELITE 30051i on the other hand, is less sensitive than Comp B and RDX on the ERL...represents the alpha to beta phase transition of KNO 3 . This endotherm is followed by four exotherms with peaks at 538 K (265*C), 567 K (2940C), 598 K

SYNCHROTRON RADIATION, FREE ELECTRON LASER, APPLICATION OF NUCLEAR TECHNOLOGY, ETC.: Study on the characteristics of linac based THz light source

NASA Astrophysics Data System (ADS)

Zhu, Xiong-Wei; Wang, Shu-Hong; Chen, Sen-Yu

2009-10-01

There are many methods based on linac for THz radiation production. As one of the options for the Beijing Advanced Light, an ERL test facility is proposed for THz radiation. In this test facility, there are 4 kinds of methods to produce THz radiation: coherent synchrotron radiation (CSR), synchrotron radiation (SR), low gain FEL oscillator, and high gain SASE FEL. In this paper, we study the characteristics of the 4 kinds of THz light sources.

Short-Time Mass Variation in Natural Atmospheric Dust.

DTIC Science & Technology

1979-11-01

many years. When the Krakatoa volcano in the South Pacific erupted in 1883, ejecting tons of dust into the high atmosphere, people from many parts of the...Flight Center, AL 35812 Commander Naval Ocean Systems Center (Code 4473) Commander ATTN: Technical Library US Army Missile R&D Command San Diego, CA...PO Box 67 ATTN: DRDMI-TBD APO San Francisco, CA 96555 US Army Missile R&D Command Redstone Arsenal, AL 35809 Director NOAA/ERL/APCL R31 Commander RB3

Suppression of the emittance growth induced by coherent synchrotron radiation in triple-bend achromats

NASA Astrophysics Data System (ADS)

Huang, Xi-Yang; Jiao, Yi; Xu, Gang; Cui, Xiao-Hao

2015-05-01

The coherent synchrotron radiation (CSR) effect in a bending path plays an important role in transverse emittance dilution in high-brightness light sources and linear colliders, where the electron beams are of short bunch length and high peak current. Suppression of the emittance growth induced by CSR is critical to preserve the beam quality and help improve the machine performance. It has been shown that the CSR effect in a double-bend achromat (DBA) can be analyzed with the two-dimensional point-kick analysis method. In this paper, this method is applied to analyze the CSR effect in a triple-bend achromat (TBA) with symmetric layout, which is commonly used in the optics designs of energy recovery linacs (ERLs). A condition of cancelling the CSR linear effect in such a TBA is obtained, and is verified through numerical simulations. It is demonstrated that emittance preservation can be achieved with this condition, and to a large extent, has a high tolerance to the fluctuation of the initial transverse phase space distribution of the beam. Supported by National Natural Science Foundation of China (11475202, 11405187) and Youth Innovation Promotion Association of Chinese Academy of Sciences (2015009)

Ferrite HOM Absorber for the RHIC ERL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hahn,H.; Choi, E.M.; Hammons, L.

A superconducting Energy Recovery Linac is under construction at Brookhaven National Laboratory to serve as test bed for RHIC upgrades. The damping of higher-order modes in the superconducting five-cell cavity for the Energy-Recovery linac at RHIC is performed exclusively by two ferrite absorbers. The ferrite properties have been measured in ferrite-loaded pill box cavities resulting in the permeability values given by a first-order Debye model for the tiled absorber structure and an equivalent permeability value for computer simulations with solid ring dampers. Measured and simulated results for the higher-order modes in the prototype copper cavity are discussed. First room-temperature measurementsmore » of the finished niobium cavity are presented which confirm the effective damping of higher-order modes in the ERL. by the ferrite absorbers.« less

Beam tuning and bunch length measurement in the bunch compression operation at the cERL

NASA Astrophysics Data System (ADS)

Honda, Y.; Shimada, M.; Miyajima, T.; Hotei, T.; Nakamura, N.; Kato, R.; Obina, T.; Takai, R.; Harada, K.; Ueda, A.

2017-12-01

Realization of a short bunch beam by manipulating the longitudinal phase space distribution with a finite longitudinal dispersion following an off-crest acceleration is a widely used technique. The technique was applied in a compact test accelerator of an energy-recovery linac scheme for compressing the bunch length at the return loop. A diagnostic system utilizing coherent transition radiation was developed for the beam tuning and for estimating the bunch length. By scanning the beam parameters, we experimentally found the best condition for the bunch compression. The RMS bunch length of 250 ±50 fs was obtained at a bunch charge of 2 pC. This result confirmed the design and the tuning procedure of the bunch compression operation for the future energy-recovery linac (ERL).

Curcumin mediated down-regulation of αV β3 integrin and up-regulation of pyruvate dehydrogenase kinase 4 (PDK4) in Erlotinib resistant SW480 colon cancer cells.

PubMed

Javadi, Samira; Rostamizadeh, Kobra; Hejazi, Jalal; Parsa, Maliheh; Fathi, Mojtaba

2018-02-01

Erlotinib is a potent, selective, and orally active inhibitor of the epidermal growth factor receptor, but the development of erlotinib resistance during chemotherapy can lead to treatment failure. To shed light on the erlotinib-resistant pathway, this study investigated the effect of combination therapy using curcumin- and erlotinib-loaded nanoparticles on the expression of α v β 3 integrin and pyruvate dehydrogenase kinase 4 (PDK4) in an erlotinib-resistant SW480 colon cancer cell line. An erlotinib-resistant SW480 colon cancer cell line was produced by long-term exposure to erlotinib. Curcumin-loaded Methoxy poly ethylene glycol Poly caprolactone (cur/mPEG-PCL) and erlotinib-loaded mPEG-PCL (erl/mPEG-PCL) micelles were provided using a single step nanoprecipitation method and used as combination therapy of resistant SW480 cancer cells. After that, gene expression levels of PDK4, αv, and β3 mRNA were determined by the semiquantitative reverse transcription-polymerase chain reaction. Protein levels of whole α v β 3 integrin were evaluated using the enzyme-linked immunosorbent assay method. In SW480 cell line, the IC50 of nonresistant and resistant cells was 87.6 ± 1.2 nM and 19.1 ± 0.14 μM, for erlotinib and it was about 21.8 and 30 μM for curcumin, respectively. Although PDK4 expression was not significantly different in resistant and nonresistant cells, its expression was up regulated (1.4 fold) in resistant cells by a combination therapy of cur/mPEG-PCL at a dose of 3 μM and erl/mPEG-PCL at a dose of 5 μM. β 3 mRNA and the protein level of whole α v β 3 integrin was significantly higher in resistant SW480 cells as compared with those in nonresistant cells. In terms of treatment, a combination of 6-μM cur/mPEG-PCL and 5-μM erl/mPEG-PCL down regulated β 3 gene expression 6.6-fold in resistant cells as compared with nonresistant cells. At the protein level, a combination of 3-μM-cur/mPEG-PCL and 10-μM erl/mPEG-PCL reduced α v β 3 protein in resistant cells. The results indicated that combination therapy using cur/mPEG-PCL and erl/mPEG-PCL could decrease α v β 3 integrin expression and increase PDK4 gene expression in resistant colon cancer cells, which may have effects on drug resistance signaling pathways. Copyright © 2017 John Wiley & Sons, Ltd.

Aquatic toxicity information retrieval data base: A technical support document. (Revised July 1992)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The AQUIRE (AQUatic toxicity Information REtrieval) database was established in 1981 by the United States Environmental Protection Agency (US EPA), Environmental Research Laboratory-Duluth (ERL-D). The purpose of AQUIRE is to provide quick access to a comprehensive, systematic, computerized compilation of aquatic toxic effects data. As of July 1992, AQUIRE consists of over 98,300 individual test results on computer file. These tests contain information for 5,500 chemicals and 2,300 organisms, extracted from over 6,300 publications. In addition, the ERL-D data file, prepared by the University of Wisconsin-Superior is now included in AQUIRE. The data file consists of acute toxicity test resultsmore » for the effects of 525 organic chemicals to fathead minnow. All AQUIRE data entries have been subjected to established quality assurance procedures.« less

Internal and external spatial attention examined with lateralized EEG power spectra.

PubMed

Van der Lubbe, Rob H J; Bundt, Carsten; Abrahamse, Elger L

2014-10-02

Several authors argued that retrieval of an item from visual short term memory (internal spatial attention) and focusing attention on an externally presented item (external spatial attention) are similar. Part of the neuroimaging support for this view may be due to the employed experimental procedures. Furthermore, as internal spatial attention may have a more induced than evoked nature some effects may not have been visible in event related analyses of the electroencephalogram (EEG), which limits the possibility to demonstrate differences. In the current study, a colored frame cued which stimulus, one out of four presented in separate quadrants, required a response, which depended on the form of the cued stimulus (circle or square). Importantly, the frame occurred either before (precue), simultaneously with (simultaneous cue), or after the stimuli (postcue). The precue and simultaneous cue condition both concern external attention, while the postcue condition implies the involvement of internal spatial attention. Event-related lateralizations (ERLs), reflecting evoked effects, and lateralized power spectra (LPS), reflecting both evoked and induced effects, were determined. ERLs revealed a posterior contralateral negativity (PCN) only in the precue condition. LPS analyses on the raw EEG showed early increased contralateral theta power at posterior sites and later increased ipsilateral alpha power at occipito-temporal sites in all cue conditions. Responses were faster when the internally or externally attended location corresponded with the required response side than when not. These findings provide further support for the view that internal and external spatial attention share their underlying mechanism. Copyright © 2014 Elsevier B.V. All rights reserved.

SEAGRASS RHIZOSPHERE MICROBIAL COMMUNITIES

EPA Science Inventory

Devereux, Richard. 2005. Seagrass Rhizosphere Microbial Communities. In: Interactions Between Macro- and Microorganisms in Marine Sediments. E. Kristense, J.E. Kostka and R.H. Haese, Editors. American Geophysical Union, Washington, DC. p199-216. (ERL,GB 1213).

Seagrasses ...

Cryogenic system for BERLinPro

DOE Office of Scientific and Technical Information (OSTI.GOV)

Anders, W.; Hellwig, A.; Knobloch, J.

2014-01-29

In 2010 Helmholtz-Zentrum Berlin (HZB) received funding to design and build the Berlin Energy Recovery Linac Project BERLinPro. The goal of this compact Energy recovery linac (ERL) is to develop the accelerator physics and technology required to generate and accelerate a 100-mA, 1-mm mrad emittance electron beam. The BERLinPro know-how can then be transferred to various ERL-based applications. All accelerating RF cavities including the electron source are based on superconducting technology operated at 1.8 K. A Linde L700 helium liquefier is supplying 4.5 K helium. The subatmospheric pressure of 16 mbar of the helium bath of the cavities will bemore » achieved by pumping with a set of cold compressors and warm vacuum pumps. While the L700 is already in operating, the 1.8 K system and the helium transfer system are in design phase.« less

Model selection for multi-component frailty models.

PubMed

Ha, Il Do; Lee, Youngjo; MacKenzie, Gilbert

2007-11-20

Various frailty models have been developed and are now widely used for analysing multivariate survival data. It is therefore important to develop an information criterion for model selection. However, in frailty models there are several alternative ways of forming a criterion and the particular criterion chosen may not be uniformly best. In this paper, we study an Akaike information criterion (AIC) on selecting a frailty structure from a set of (possibly) non-nested frailty models. We propose two new AIC criteria, based on a conditional likelihood and an extended restricted likelihood (ERL) given by Lee and Nelder (J. R. Statist. Soc. B 1996; 58:619-678). We compare their performance using well-known practical examples and demonstrate that the two criteria may yield rather different results. A simulation study shows that the AIC based on the ERL is recommended, when attention is focussed on selecting the frailty structure rather than the fixed effects.

The University of Kansas Applied Sensing Program: An operational perspective

NASA Technical Reports Server (NTRS)

Martinko, E. A.

1981-01-01

The Kansas applied remote sensing (KARS) program conducts demonstration projects and applied research on remote sensing techniques which enable local, regional, state and federal agency personnel to better utilize available satellite and airborne remote sensing systems. As liason with Kansas agencies for the Earth Resources Laboratory (ERL), Kansas demonstration project, KARS coordinated interagency communication, field data collection, hands-on training, and follow-on technical assistance and worked with Kansas agency personnel in evaluating land cover maps provided by ERL. Short courses are being conducted to provide training in state-of-the-art remote sensing technology for university faculty, state personnel, and persons from private industry and federal government. Topics are listed which were considered in intensive five-day courses covering the acquisition, interpretation, and application of information derived through remote sensing with specific training and hands-on experience in image interpretation and the analysis of LANDSAT data are listed.

Waitlist Outcomes for Patients Relisted Following Failed Donation After Cardiac Death Liver Transplant: Implications for Awarding Model for End-Stage Liver Disease Exception Scores.

PubMed

Croome, K P; Lee, D D; Nguyen, J H; Keaveny, A P; Taner, C B

2017-09-01

Understanding of outcomes for patients relisted for ischemic cholangiopathy following a donation after cardiac death (DCD) liver transplant (LT) will help standardization of a Model for End-Stage Liver Disease exception scheme for retransplantation. Early relisting (E-RL) for DCD graft failure caused by primary nonfunction (PNF) or hepatic artery thrombosis (HAT) was defined as relisting ≤14 days after DCD LT, and late relisting (L-RL) due to biliary complications was defined as relisting 14 days to 3 years after DCD LT. Of 3908 DCD LTs performed nationally between 2002 and 2016, 540 (13.8%) patients were relisted within 3 years of transplant (168 [4.3%] in the E-RL group, 372 [9.5%] in the L-RL group). The E-RL and L-RL groups had waitlist mortality rates of 15.4% and 10.5%, respectively, at 3 mo and 16.1% and 14.3%, respectively, at 1 year. Waitlist mortality in the L-RL group was higher than mortality and delisted rates for patients with exception points for both hepatocellular carcinoma (HCC) and hepatopulmonary syndrome (HPS) at 3- to 12-mo time points (p < 0.001). Waitlist outcomes differed in patients with early DCD graft failure caused by PNF or HAT compared with those with late DCD graft failure attributed to biliary complications. In L-RL, higher rates of waitlist mortality were noted compared with patients listed with exception points for HCC or HPS. © 2017 The American Society of Transplantation and the American Society of Transplant Surgeons.

A Randomized Trial Comparing Live and Telemedicine Delivery of an Imagery-based Behavioral Intervention for Breast Cancer Survivors: Reducing Symptoms and Barriers to Care

PubMed Central

Freeman, Lyn W.; White, Rebecca; Ratcliff, Chelsea G.; Sutton, Sue; Stewart, Mary; Palmer, J. Lynn; Link, Judith; Cohen, Lorenzo

2015-01-01

Objective This multi-site randomized trial evaluates the quality of life (QOL) benefits of an imagery-based group intervention titled “Envision the Rhythms of Life” (ERL). Methods Breast cancer survivors >6 weeks post-treatment were randomized to attend five weekly 4-hour group sessions at a community center with therapist present (live-delivery; LD, n=48); therapist streamed via telemedicine (telemedicine-delivery; TD, n=23); or to a waitlist control group (WL, n=47). Weekly individual phone calls to encourage at-home practice began at session one and continued until the 3-month follow-up. Seven self-report measures of QOL were examined at baseline, 1 and 3 months post-treatment including health-related and breast cancer-specific QOL, fatigue, cognitive function, spirituality, distress, and sleep. Results The Bonferroni method was used to correct for multiple comparisons, and alpha was adjusted to 0.01. LMM analyses revealed less fatigue, cognitive dysfunction, and sleep disturbance for LD and TD compared to WL across the follow-up (p’s <0.01). Changes in fatigue, cognitive dysfunction, sleep disturbance, and health-related and breast cancer-related QOL were clinically significant. There were no differences between LD and TD. Conclusions Both the live and telemedicine delivered ERL intervention resulted in improvements in multiple QOL domains for breast cancer survivors compared to a waitlist control. Further, there were no significant differences between live- and telemedicine-delivery, suggesting telemedicine delivered ERL intervention may represent an effective and viable option for cancer survivors in remote areas. PMID:25146413

Applications Using High Flux LCS gamma-ray Beams: Nuclear Security and Contributions to Fukushima

NASA Astrophysics Data System (ADS)

Fujiwara, Mamoru

2014-09-01

Nuclear nonproliferation and security are an important issue for the peaceful use of nuclear energy. Many countries now collaborate together for preventing serious accidents from nuclear terrorism. Detection of hidden long-lived radioisotopes and fissionable nuclides in a non-destructive manner is useful for nuclear safeguards and management of nuclear wastes as well as nuclear security. After introducing the present situation concerning the nuclear nonproliferation and security in Japan, we plan to show the present activities of JAEA to detect the hidden nuclear materials by means of the nuclear resonance fluorescence with energy-tunable, monochromatic gamma-rays generated by Laser Compton Scattering (LCS) with an electron beam. The energy recovery linac (ERL) machine is now under development with the KEK-JAEA collaboration for realizing the new generation of gamma-ray sources. The detection technologies of nuclear materials are currently developed using the existing electron beam facilities at Duke University and at NewSubaru. These developments in Japan will contribute to the nuclear security program in Japan and to the assay of melted nuclear fuels in the Fukushima Daiichi nuclear power plants.

Enhanced quasi-static particle-in-cell simulation of electron cloud instabilities in circular accelerators

NASA Astrophysics Data System (ADS)

Feng, Bing

Electron cloud instabilities have been observed in many circular accelerators around the world and raised concerns of future accelerators and possible upgrades. In this thesis, the electron cloud instabilities are studied with the quasi-static particle-in-cell (PIC) code QuickPIC. Modeling in three-dimensions the long timescale propagation of beam in electron clouds in circular accelerators requires faster and more efficient simulation codes. Thousands of processors are easily available for parallel computations. However, it is not straightforward to increase the effective speed of the simulation by running the same problem size on an increasingly number of processors because there is a limit to domain size in the decomposition of the two-dimensional part of the code. A pipelining algorithm applied on the fully parallelized particle-in-cell code QuickPIC is implemented to overcome this limit. The pipelining algorithm uses multiple groups of processors and optimizes the job allocation on the processors in parallel computing. With this novel algorithm, it is possible to use on the order of 102 processors, and to expand the scale and the speed of the simulation with QuickPIC by a similar factor. In addition to the efficiency improvement with the pipelining algorithm, the fidelity of QuickPIC is enhanced by adding two physics models, the beam space charge effect and the dispersion effect. Simulation of two specific circular machines is performed with the enhanced QuickPIC. First, the proposed upgrade to the Fermilab Main Injector is studied with an eye upon guiding the design of the upgrade and code validation. Moderate emittance growth is observed for the upgrade of increasing the bunch population by 5 times. But the simulation also shows that increasing the beam energy from 8GeV to 20GeV or above can effectively limit the emittance growth. Then the enhanced QuickPIC is used to simulate the electron cloud effect on electron beam in the Cornell Energy Recovery Linac (ERL) due to extremely small emittance and high peak currents anticipated in the machine. A tune shift is discovered from the simulation; however, emittance growth of the electron beam in electron cloud is not observed for ERL parameters.

MYSID TWO-GENERATION TEST GUIDELINE

EPA Science Inventory

McKenney, Charles L., Jr. In press. Mysid Two-Generation Test Guideline. OECD Expert Group on Invertebrate Testing for Endocrine Disruptors, Organisation for Economic Co-operation and Development, Paris, France. 17 p. (ERL,GB 1215).

This guideline describes a two-generati...

INDICATORS OF ECOSYSTEM INTEGRITY FOR ESTUARIES

EPA Science Inventory

Jordan, Stephen J. and Lisa M. Smith. In press. Indicators of Ecosystem Integrity for Estuaries. In: Proceedings of the Estuarine Indicators Workshop, 29-31 October 2003, Sanibel Island, FL. Sanibel-Captiva Conservation Foundation, Sanibel, FL. 23 p. (ERL,GB 1194).

Ideal ...

Northern Eurasia Earth Science Partnership Initiative in the past 12 months: An Update

NASA Astrophysics Data System (ADS)

Groisman, Pavel; Lowford, Richard

2013-04-01

Eight years ago Northern Eurasia Earth Science Partnership Initiative (NEESPI) was launched with the release of its Science Plan (http://neespi.org). Gradually, the Initiative was joined by numerous international projects launched in EU, Russia, the United States, Canada, Japan, and China. Throughout its duration, NEESPI served and is serving as an umbrella for more than 155 individual international research projects. Currently, the total number of the ongoing NEESPI projects (as on January 2013) is 48 and has changed but slightly compared to its peak (87 in 2008). The past 12 months (from the previous EGU Assembly) were extremely productive in the NEESPI outreach. We organized three Open Science Sessions at the three major Geoscience Unions/Assembly Meetings (JpGU, AGU, and this EGU Session) and three International NEESPI Workshops. The programs of two of these Workshops (in Yoshkar Ola and Irkutsk, Russia) included Summer Schools for early career scientists. More than 150 peer-reviewed papers, books, and/or book chapters were published in 2012 or are in press (this list was still incomplete at the time of preparation of this abstract). In particular, a suite of 25 peer-reviewed NEESPI articles was published in the Forth Special NEESPI Issue of "Environmental Research Letters" (ERL) http://iopscience.iop.org/1748-9326/focus/NEESPI3 (this is the third ERL Issue). In December 2012, the next Special ERL NEESPI Issue was launched http://iopscience.iop.org/1748-9326/focus/NEESPI4. Northern Eurasia is a large study domain. Therefore, it was decided to describe the latest findings related to its environmental changes in several regional monographs in English. Three books on Environmental Changes in the NEESPI domain were published by the University of Helsinki (Groisman et al. 2012), "Akademperiodyka" (Groisman and Lyalko 2012), and Springer Publishing House (Groisman and Gutman 2013) being devoted to the high latitudes of Eurasia, to Eastern Europe, and to Siberia respectively. We expect that one more book (Chen et al. 2013) will be published simultaneously by Higher Education Press and De Gruyter Publ. House prior to commence of this Assembly. In this presentation, the description of the NEESPI Program will be complemented with an overview of the results presented in the latest our books "Earth System Change over Eastern Europe", "Regional Environmental Changes in Siberia and Their Global Consequences", and "Dryland East Asia: Land Dynamics amid Social and Climate Change" and the future of the Initiative will be discussed. Cited references: • Groisman, P.Ya., A. Reissell, and Marjut Kaukolehto (eds.) 2012: Proceedings of the Northern Eurasian Earth Science Partnership Initiative (NEESPI) Regional Science Team Meeting devoted to the High Latitudes. Report Series in Aerosol Science, No. 130, Helsinki, Finland, 153 pp. • Groisman, P.Ya. and V.I. Lyalko (eds.) 2012: Earth Systems Change over Eastern Europe. Akademperiodyka, Kiev, The Ukraine, 488 pp. ISBN 978-966-360-195-3. • Groisman and Gutman (eds.) 2013: Environmental Changes in Siberia: Regional Changes and their Global Consequences. Springer, Amsterdam, The Netherlands, 357 pp. doi:10.1007/978-94-007-4569-8 • Chen, J., S. Wan, J. Qi, G. Henebry, M Kappas, and G. Sun (eds.) 2013: Region of East Asia: Land Dynamics amid Social and Climate Change. Beijing: Higher Education Press and Berlin: De Gruyter. (in press)

MICROBIAL BIOFILMS AS INTEGRATIVE SENSORS OF ENVIRONMENTAL QUALITY

EPA Science Inventory

Snyder, Richard A., Michael A. Lewis, Andreas Nocker and Joe E. Lepo. In press. Microbial Biofilms as Integrative Sensors of Environmental Quality. In: Estuarine Indicators Workshop Proceedings. CRC Press, Boca Raton, FL. 34 p. (ERL,GB 1198).

Microbial biofilms are comple...

ADVANCING PAH ECORISK ASSESSMENT

EPA Science Inventory

Engle, Virginia D. and Stephen J. Jordan. In press. Diagnosing Causes of Impairment in Coastal Ecosystems (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R1008).

Estuarine and coastal ecosystems are challenge...

EMAP: MYTHS, HOBGOBLINS AND CRUSAES

EPA Science Inventory

Paulsen, Steve and Kevin Summers. In press. EMAP: Myths, Hobgoblins and Crusades (Abstract). To be presented at EMAP Symposium 2004: Integrated Monitoring and Assessment for Effective Water Quality Management, 3-7 May 2004, Newport, RI. 1 p. (ERL,GB R980).

The Environment...

Periodontal treatment with an Er:YAG laser compared to ultrasonic instrumentation: a pilot study.

PubMed

Sculean, Anton; Schwarz, Frank; Berakdar, Mohammad; Romanos, George E; Arweiler, Nicole B; Becker, Jürgen

2004-07-01

The aim of the present study was to compare the effectiveness of an Er:YAG laser to that of ultrasonic scaling for non-surgical periodontal treatment. Twenty patients with moderate to advanced periodontal disease were randomly treated in a split-mouth design with a single episode of subgingival debridement using either an Er:YAG laser device (160 mJ/pulse, 10 Hz) combined with a calculus detection system with fluorescence induced by 655 nm InGaAsP diode laser radiation (ERL), or an ultrasonic instrument (UI). Clinical assessments of full-mouth plaque score (FMPS), bleeding on probing (BOP), probing depth (PD), gingival recession (GR), and clinical attachment level (CAL) were made at baseline and at 3 and 6 months following therapy. No differences in any of the investigated parameters were observed at baseline between the two groups. The mean value of BOP decreased in the ERL group from 40% at baseline to 17% after 6 months (P<0.0001) and in the UI group from 46% at baseline to 15% after 6 months (P<0.0001). The sites treated with ERL demonstrated mean CAL gain of 1.48 +/- 0.73 mm (P<0.001) and of 1.11 +/- 0.59 mm (P<0.001) at 3 and 6 months, respectively. The sites treated with UI demonstrated mean CAL gain of 1.53 +/- 0.67 mm (P<0.001) and of 1.11 +/- 0.46 mm (P<0.001) at 3 and 6 months, respectively. No statistically significant differences were observed between the groups (P>0.05). Within the limits of the present study, it can be concluded that both therapies led to significant improvements of the investigated clinical parameters.

A randomized trial comparing live and telemedicine deliveries of an imagery-based behavioral intervention for breast cancer survivors: reducing symptoms and barriers to care.

PubMed

Freeman, Lyn W; White, Rebecca; Ratcliff, Chelsea G; Sutton, Sue; Stewart, Mary; Palmer, J Lynn; Link, Judith; Cohen, Lorenzo

2015-08-01

This multi-site randomized trial evaluates the quality of life (QOL) benefits of an imagery-based group intervention titled 'Envision the Rhythms of Life'(ERL). Breast cancer survivors >6 weeks post-treatment were randomized to attend five weekly 4-h group sessions at a community center with therapist present (live delivery (LD), n = 48), therapist streamed via telemedicine (telemedicine delivery (TD), n = 23), or to a waitlist control (WL) group (n = 47). Weekly individual phone calls to encourage at-home practice began at session one and continued until the 3-month follow-up. Seven self-report measures of QOL were examined at baseline, 1-month and 3-month post-treatments including health-related and breast cancer-specific QOL, fatigue, cognitive function, spirituality, distress, and sleep. The Bonferroni method was used to correct for multiple comparisons, and alpha was adjusted to 0.01. Linear multilevel modeling analyses revealed less fatigue, cognitive dysfunction, and sleep disturbance for LD and TD compared with WL across the follow-up (p's < 0.01). Changes in fatigue, cognitive dysfunction, sleep disturbance, and health-related and breast cancer-related QOL were clinically significant. There were no differences between LD and TD. Both the live and telemedicine delivered ERL intervention resulted in improvements in multiple QOL domains for breast cancer survivors compared with WL. Further, there were no significant differences between LD and TD, suggesting telemedicine delivered ERL intervention may represent an effective and viable option for cancer survivors in remote areas. Copyright © 2014 John Wiley & Sons, Ltd.

Persistent Association of Nailfold Capillaroscopy Changes and Skin Involvement Over Thirty-Six Months With Duration of Untreated Disease in Patients With Juvenile Dermatomyositis

PubMed Central

Christen-Zaech, Stéphanie; Seshadri, Roopa; Sundberg, Joyce; Paller, Amy S.; Pachman, Lauren M.

2010-01-01

Objective To determine the association of changes on nailfold capillaroscopy with clinical findings and genotype in children with juvenile dermatomyositis (DM), in order to identify potential differences in disease course over 36 months. Methods At diagnosis of juvenile DM in 61 children prior to the initiation of treatment, tumor necrosis factor α (TNFα) −308 allele and DQA1*0501 status was determined, juvenile DM Disease Activity Scores (DAS) were obtained, and nailfold capillaroscopy was performed. The disease course was monitored for 36 months. Variations within and between patients were assessed by regression analysis. Results At diagnosis, shorter duration of untreated disease (P = 0.05) and a lower juvenile DM skin DAS (P = 0.035) were associated with a unicyclic disease course. Over 36 months, end-row loop (ERL) regeneration was associated with lower skin DAS (P < 0.001) but not muscle DAS (P = 0.98); ERL regeneration and decreased bushy loops were associated with a shorter duration of untreated disease (P = 0.04 for both). At 36 months, increased ERL regeneration (P = 0.007) and improvement of skin DAS (P < 0.001) and muscle DAS (P = 0.025) were associated with a unicyclic disease course. Conclusion Early treatment of juvenile DM may lead to a unicyclic disease course. The non-unicyclic disease course usually involves continuing skin manifestations with persistent nailfold capillaroscopy changes. The correlation of nailfold capillaroscopy results with cutaneous but not with musculoskeletal signs of juvenile DM over a 36-month period suggests that the cutaneous and muscle vasculopathies have different pathophysiologic mechanisms. These findings indicate that efforts to identify the optimal treatment of cutaneous features in juvenile DM require greater attention. PMID:18240225

Persistent association of nailfold capillaroscopy changes and skin involvement over thirty-six months with duration of untreated disease in patients with juvenile dermatomyositis.

PubMed

Christen-Zaech, Stéphanie; Seshadri, Roopa; Sundberg, Joyce; Paller, Amy S; Pachman, Lauren M

2008-02-01

To determine the association of changes on nailfold capillaroscopy with clinical findings and genotype in children with juvenile dermatomyositis (DM), in order to identify potential differences in disease course over 36 months. At diagnosis of juvenile DM in 61 children prior to the initiation of treatment, tumor necrosis factor alpha (TNFalpha) -308 allele and DQA1*0501 status was determined, juvenile DM Disease Activity Scores (DAS) were obtained, and nailfold capillaroscopy was performed. The disease course was monitored for 36 months. Variations within and between patients were assessed by regression analysis. At diagnosis, shorter duration of untreated disease (P = 0.05) and a lower juvenile DM skin DAS (P = 0.035) were associated with a unicyclic disease course. Over 36 months, end-row loop (ERL) regeneration was associated with lower skin DAS (P < 0.001) but not muscle DAS (P = 0.98); ERL regeneration and decreased bushy loops were associated with a shorter duration of untreated disease (P = 0.04 for both). At 36 months, increased ERL regeneration (P = 0.007) and improvement of skin DAS (P < 0.001) and muscle DAS (P = 0.025) were associated with a unicyclic disease course. Early treatment of juvenile DM may lead to a unicyclic disease course. The non-unicyclic disease course usually involves continuing skin manifestations with persistent nailfold capillaroscopy changes. The correlation of nailfold capillaroscopy results with cutaneous but not with musculoskeletal signs of juvenile DM over a 36-month period suggests that the cutaneous and muscle vasculopathies have different pathophysiologic mechanisms. These findings indicate that efforts to identify the optimal treatment of cutaneous features in juvenile DM require greater attention.

REGIONAL MONITORING OF CORAL CONDITION IN THE FLORIDA KEYS

EPA Science Inventory

Fisher, William S. and Deborah L. Santavy. 2004. Regional Monitoring of Coral Condition in Florida Keys (Abstract). Presented at the Monitoring Science and Technology Symposium, 20-24 September 2004, Denver, CO. 1 p. (ERL,GB R1020).

Coral reefs have experienced unpreceden...

DIAGNOSING CAUSES OF IMPAIRMENT IN COASTAL ECOSYSTEMS

EPA Science Inventory

Engle, Virginia D. and Stephen J. Jordan. In press. Diagnosing Causes of Impairment in Coastal Ecosystems (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R1008).

Estuarine and coastal ecosystems are challenge...

ANTIMICROBIAL ACTIVITY OF COPPER AND ZINC ACCUMULATED BY EASTERN OYSTER AMEBOCYTES

EPA Science Inventory

Fisher, William S. Submitted. Antimicrobial Activity of Copper and Zinc Accumulated by Eastern Oyster Amebocytes. J. Shellfish Res. 54 p. (ERL,GB 1196).

The distribution of eastern oysters Crassostrea virginica near terrestrial watersheds has led to a general impression t...

Behavioral and Brain Measures of Phasic Alerting Effects on Visual Attention.

PubMed

Wiegand, Iris; Petersen, Anders; Finke, Kathrin; Bundesen, Claus; Lansner, Jon; Habekost, Thomas

2017-01-01

In the present study, we investigated effects of phasic alerting on visual attention in a partial report task, in which half of the displays were preceded by an auditory warning cue. Based on the computational Theory of Visual Attention (TVA), we estimated parameters of spatial and non-spatial aspects of visual attention and measured event-related lateralizations (ERLs) over visual processing areas. We found that the TVA parameter sensory effectiveness a , which is thought to reflect visual processing capacity, significantly increased with phasic alerting. By contrast, the distribution of visual processing resources according to task relevance and spatial position, as quantified in parameters top-down control α and spatial bias w index , was not modulated by phasic alerting. On the electrophysiological level, the latencies of ERLs in response to the task displays were reduced following the warning cue. These results suggest that phasic alerting facilitates visual processing in a general, unselective manner and that this effect originates in early stages of visual information processing.

Assessment of trace metals pollution in estuarine sediments using SEM-AVS and ERM-ERL predictions.

PubMed

Garcia, Carlos Alexandre Borges; Passos, Elisangela de Andrade; Alves, José do Patrocínio Hora

2011-10-01

This paper presents the distributions of the investigation of trace metals geochemistry in surface sediments of the Sergipe river estuary, northeast Brazil. Analyses were carried out by Flame or electrothermal atomic absorption spectrometry (FAAS or ETAAS). Principal component analysis was applied to results to identify any groupings among the different sampling sites. In order to determine the extent of contamination, taking into account natural variability within the region, metal concentrations were normalized relative to aluminium. Cr, Cu, Ni and Zn contamination was observed in sediments from the area receiving highest inputs of domestic wastes, while cadmium contamination occurred in sediments from the region affected by highest inflows of industrial effluents. Possible toxicity related to these metals was examined using the relationship simultaneously extracted metals/acid volatile sulfide and by comparing sediment chemical data with sediment quality guidelines ERL-ERM values. Results obtained using the two methods were in agreement and indicated that adverse effects on aquatic biota should rarely occur.

COLLECTION AND INTEGRATION OF MORTALITY DATA IN THE GULF OF MEXICO

EPA Science Inventory

(Abstract). Presented at the WPTI Workshop on Marine Vertebrates as Sentinels, 6-9 October 2001, Tarrytown, NY. 1 p. (ERL,GB R840).

Mortalities of aquatic organisms occur frequently due to both natural and anthropogenic causes. In any mortality event, observed mortalities...

SURVEY OF METHODOLOGIES FOR DEVELOPING MEDIA SCREENING VALUES FOR ECOLOGICAL RISK ASSESSMENT

EPA Science Inventory

Barron, Mace G. and Steve Wharton. Submitted. Survey of Methodologies for Developing Media Screening Values for Ecological Risk Assessment. Environ. Toxicol. Chem. 44 p. (ERL,GB 1200).

Concurrent with the increase in the number of ecological risk assessments over the past...

RELATIONSHIP OF AMEBOCYTES AND TERRESTRIAL ELEMENTS TO ADULT SHELL DEPOSITION IN EASTERN OYSTERS

EPA Science Inventory

Fisher, William S. Submitted. Relationship of Amebocytes and Terrestrial Elements to Adult Shell Deposition in Eastern Oysters. J. Shellfish Res. 30 p. (ERL,GB 1197).

Freshwater runoff contains terrestrial elements from geological deposits that may be vital to eastern oys...

GULF OF MEXICO HYPOXIA MONITORING AND MODELING

EPA Science Inventory

Greene, Richard M. and Russell G. Kreis. In press. Gulf of Mexico Hypoxia Monitoring and Modeling (Abstract). To be presented at the EPA Science Forum: Healthy Communities and Ecosystems, 1-3 June 2004, Washington, DC. 1 p. (ERL,GB R990).

Oxygen-depleted or hypoxic bottom...

PILOT PROJECT CLOSE UP: ORD RESEARCH INVENTORY

EPA Science Inventory

Harvey, Jim and Elin Ulrich. 2004. Pilot Project Close Up: ORD Research Inventory. Changing Times. Pp. 1. (ERL,GB R1022).

At the January 2003 summit, many people were drawn to our vision of improving ORD's internal communications by creating a "go-to" page that consolicat...

A SIMPLE METHOD FOR THE EXTRACTION AND QUANTIFICATION OF PHOTOPIGMENTS FROM SYMBIODINIUM SPP.

EPA Science Inventory

John E. Rogers and Dragoslav Marcovich. Submitted. Simple Method for the Extraction and Quantification of Photopigments from Symbiodinium spp.. Limnol. Oceanogr. Methods. 19 p. (ERL,GB 1192).

We have developed a simple, mild extraction procedure using methanol which, when...

INORGANIC ELEMENTS AND DISTRIBUTION OF EASTERN OYSTERS.

EPA Science Inventory

Fisher, William S. In press. Inorganic Elements and Distribution of Eastern Oysters (Abstract). To be presented at the 96th Annual Meeting (Aquaculture 2004) of the National Shellfisheries Association, 1-5 March 2004, Honolulu, HI. 1 p. (ERL,GB R962).

For over a century w...

Assessment of geochemical mobility of metals in surface sediments of the Santa Rosalia mining region, Western Gulf of California.

PubMed

Shumilin, Evgueni; Gordeev, Vyacheslav; Figueroa, Griselda Rodríguez; Demina, Liudmila; Choumiline, Konstantin

2011-01-01

To asses the geomobility of cadmium, copper, iron, manganese, nickel, lead, and zinc in marine sediments near the Santa Rosalía copper smelter, which is located on the eastern coast of the Baja California Peninsula, sequential leaching was applied to sediment samples containing different levels of Cu: (1) uncontaminated or slightly contaminated (<55 mg kg⁻¹ Cu); (2) moderately contaminated (55-500 mg kg⁻¹ Cu); and (3) heavily contaminated (>500 mg kg⁻¹ Cu). Concentrations of Cd, Cu, Fe, Mn, Ni, Pb, and Zn in four fractions of the leachate (mobile fraction F1, relatively mobile fraction F2, associated with organic matter/sulphides fraction F3, and residual fraction F4) were measured by atomic absorption spectrophotometry (AAS). The sediments with Cu concentration <500 mg kg⁻¹ displayed prevalence of mobile acid-leachable fraction F1 and reducible fraction F2 for Cd, Cu, Mn, and Pb, whereas the relative contribution of fraction F3 was relatively low for all of the examined metals. Residual fraction F4 was highest (>65%) for Fe and Ni because both metals are associated with the crystalline matrix of natural sediments. The sediments heavily contaminated with Cu (>500 mg kg⁻¹) had dramatically increased percentages of Cu, Mn, Pb, and Zn, ranging on average from 63 to 81%, in the residual fraction. In the case of Cu, for example, the relative abundances of this element in the different fractions of such sediments followed this sequence: residual fraction F4 (76 ± 5%) >absorbed form and carbonates fraction F1 (15 ± 5%) >Fe and Mn oxyhydroxides fraction F2 (5 ± 2%) >fraction associated with organic matter and sulphides F3 (4.5 ± 3.9%). Copper, Pb, and Zn contents in each geochemical fraction of all samples were compared with sediment-quality guideline values ("effects range low" [ERL] and "effects range medium" [ERM]) to assess their possible negative effects on biota. Copper contents in mobile fractions F1 and F2, which were moderately contaminated with Cu, were higher than ERL but lower than ERM guideline values. For heavily contaminated sediments, Zn contents of mobile fractions F1 and F2 were higher than ERL but lower than ERM guideline values. The Cu content of fraction F1 was higher than ERM guideline values, whereas for fractions F2 and F3 copper content was higher than ERL guidelines but still lower than ERM guideline values.

FISHERY RESOURCES AND THREATENED HABITATS IN THE NORTHERN GULF OF MEXICO

EPA Science Inventory

Jordan, Steve and Darrin Dantin. 2004. Fishery Resources and Threatened Habitats in the Northern Gulf of Mexico (Abstract). Presented at the Aquatic Stressors All-Investigators Meeting, 9-11 March 2004, Washington, DC. 1 p. (ERL,GB R996).

We have explored relationships be...

POLLUTION AND ECOSYSTEM HEALTH - ASSESSING ECOLOGICAL CONDITION OF COASTAL ECOSYSTEMS

EPA Science Inventory

Summers, Kevin. 2004. Pollution and Ecosystem Health - Assessing Ecological Condition of Coastal Ecosystems. Presented at the White Water to Blue Water (WW2BW) Miami Conference, 21-26 March 2004, Miami, FL. 1 p. (ERL,GB R973).

Throughout the coastal regions and Large Mari...

POTENTIAL IMPACTS OF GENOMICS ON EPA REGULATORY AND RISK ASSESSMENT APPLICATIONS

EPA Science Inventory

Gallagher, Kathryn and William Benson. In press. Potential Impacts of Genomics on EPA Regulatory and Risk Assessment (Abstract). To be presented at the EPA Science Forum: Healthy Communities and Ecosystems, 1-3 June 2004, Washington, DC. 1 p. (ERL,GB R991).

Advances in ge...

OCCURRENCE AND ORIENTATION OF PARALICHTHID FLOUNDERS (BOTHIDAE: PARALICHTYS) ON AN INTERTIDAL BEACH

EPA Science Inventory

Middaugh, Douglas P. and Charles L. McKenney, Jr. 2003. Occurrence and Orientation of Flounders (Bothidae: Paralichthys) on an Intertidal Beach. J. North Carol. Acad. Sci. 119(4):157-171. (ERL,GB 1172).

The intertidal movement and burying pattern of paralichthid flounders...

ACUTE SENSITIVITY OF JUVENILE SHORTNOSE STURGEON TO LOW DISSOLVED OXYGEN CONCENTRATIONS

EPA Science Inventory

Campbell, Jed G. and Larry R. Goodman. 2004. Acute Sensitivity of Juvenile Shortnose Sturgeon to Low Dissolved Oxygen Concentrations. EPA/600/J-04/175. Trans. Am. Fish. Soc. 133(3):772-776. (ERL,GB 1155).

There is considerable concern that factors such as eutrophication, ...

FROM INDIVIDUALS TO POPULATIONS: MODELING TOXICITY DATA ACROSS LEVELS OF BIOLOGICAL ORGANIZATION

EPA Science Inventory

Raimondo, Sandy and Charles L. McKenney, Jr. In press. From Individuals to Populations: Modeling Toxicity Data Across Levels of Biological Organization (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R1012).

...

EXPRESSION PROFILING OF ESTROGENIC COMPOUNDS USING A SHEEPSHEAD MINNOW CDNA MACROARRAY

EPA Science Inventory

Larkin, Patrick, Leroy C. Folmar, Michael J. Hemmer, Arianna J. Poston and Nancy D. Denslow. 2003. Expression Profiling of Estrogenic Compounds Using a Sheepshead Minnow cDNA Macroarray. Environ. Health Perspect. 111(6):839-846. (ERL,GB 1171).

A variety of anthropogenic c...

VITELLOGENIN EXPRESSION IN SHEEPSHEAD MINNOWS FROM THE PENSACOLA BAY SYSTEM

EPA Science Inventory

Hemmer, M.J., B.L. Hemmer, S.D. Friedman and P.S. Harris. In press. Vitellogenin Expression in Populations of Sheepshead Minnows from the Pensacola Bay System (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R1015). <...

SEDIMENT HABITAT ASSESSMENT FOR TARGETED NEAR-COASTAL AREAS OF THE GULF OF MEXICO: A SUMMARY

EPA Science Inventory

Lewis, Michael A. In press. Sediment Habitat Assessment for Targeted Near-Coastal Areas of the Gulf of Mexico: A Summary. In: Estuarine Indicators Workshop Proceedings. CRC Press, Boca Raton, FL. 25 p. (ERL,GB 1201).

Sediment chemical and biological quality is summarized ...

Computerunterstütztes Modellieren mit Musiknetzen

NASA Astrophysics Data System (ADS)

Levens, Ulla

In der folgenden Ausführung geht es um eine Anwendung von Petri-Netzen im Bereich Musik. Ausgehend von der Implementierung einer speziellen Anwendung, dem Programmsystem ScoreSynth, wird das zugrundeliegende Konzept erläutert und anschließend an einem kleinen Beispiel veranschaulicht. Dieser Beitrag ist ein Auszug aus [Lev95b].

POTENTIAL IMPLICATIONS OF GENOMICS FOR REGULATORY AND RISK ASSESSMENT APPLICATIONS AT EPA

EPA Science Inventory

Benson, W.H., K. Gallagher and K. Dearfield. In press. Potential Implications of Genomics for Regulatory and Risk Assessment Applications at EPA (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R1002).

Advance...

SEEING THE LIGHT: A WATER CLARITY INDEX FOR INTEGRATED WATER QUALITY ASSESSMENTS

EPA Science Inventory

Smith, Lisa M. and Linda C. Harwell. In press. Seeing the Light: A Water Clarity Index for Integrated Water Quality Assessments (Abstract). To be presented at EMAP Symposium 2004: Integrated Monitoring & Assessment for Effective Water Quality Management. 1 p. (ERL,GB R970).
<...

THE NATIONAL COASTAL ASSESSMENT SETAC ANNUAL MEETING, BALTIMORE, MD NOV 2001

EPA Science Inventory

To be presented at the 22nd Annual Meeting of the Society of Environmental Toxicology and Chemistry: Changing Environmental Awareness: Societal Concerns and Scientific Responses, 11-15 November 2001, Baltimore, MD. 1 p. (ERL,GB R859).

The primary purpose of the Environmen...

THE FISHES OF THE PELICAN CAYS, BELIZE

EPA Science Inventory

Smith, C. Lavett, James C. Tyler, William P. Davis, Robert S. Jones, David G. Smith and Carole C. Baldwin. Submitted. Fishes of the Pelican Cays, Belize. Atoll Res. Bull. 108 p. (ERL,GB 1204).

The fishes of the Pelican Cays, Belize, were sampled using a combination of sma...

PROJECTING POPULATION-LEVEL RESPONSES OF MYSIDS EXPOSED TO AN ENDOCRINE DISRUPTING CHEMICAL

EPA Science Inventory

Raimondo, Sandy and Charles L. McKenney, Jr. Submitted. Projecting Population-Level Responses of Mysids Exposed to an Endocrine-Disrupting Chemical. Integr. Comp. Biol. 23 p. (ERL,GB 1203).

To fully understand the implications of a chemical's effect on the conservation of...

PHYTOPLANKTON AND ZOOPLANKTON SEASONAL DYNAMICS IN A SUBTROPICAL ESTUARY: IMPORTANCE OF CYANOBACTERIA

EPA Science Inventory

Murrell, Michael C. and Emile M. Lores. 2004. Phytoplankton and Zooplankton Seasonal Dynamics in a Subtropical Estuary: Importance of Cyanobacteria. J. Plankton Res. 26(3):371-382. (ERL,GB 1190).

A seasonal study of phytoplankton and zooplankton was conducted from 1999-20...

CORAL RESPONSES TO CLIMATE AND LAND USE CHANGES

EPA Science Inventory

Fisher, William S., Debbie L. Santavy, John E. Rogers and Richard G. Zepp. In press. Coral Responses to Climate and Land Use Changes (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R1019).

Coral reefs have ex...

A Calculation and Measurement of Radiative Moller Scattering at 100 MeV with DarkLight

NASA Astrophysics Data System (ADS)

Epstein, Charles; DarkLight Collaboration

2017-01-01

A number of current experiments rely on precise knowledge of electron-electron (Moller) and positron-electron (Bhabha) scattering. Many of these experiments, which have lepton beams on atomic targets, use these QED processes as normalization. In other cases, such as DarkLight (at the Jefferson Lab ERL), with electron beams at relatively low energy (100 MeV) and very high power (1 Megawatt), Moller scattering and radiative Moller scattering have such enormous cross-sections that they produce extensive amounts of noise that must be understood. In this low-energy regime, the electron mass can also not be neglected. As a result, we have developed a new Monte Carlo event generator for the radiative Moller and Bhabha processes, extending existing soft-photon radiative corrections with new, exact single-photon bremsstrahlung calculations, and including the electron mass:. DarkLight provides us a unique opportunity to study this process experimentally and compare it with our work. As a result, we are preparing a dedicated apparatus consisting of two magnetic spectrometers as part of the first phase of DarkLight in order to directly measure this process. An overview of the calculation and the status of the experiment's construction will be presented.

Low shrinkage light curable nanocomposite for dental restorative material.

PubMed

Chen, Min-Huey; Chen, Ci-Rong; Hsu, Seng-Haw; Sun, Shih-Po; Su, Wei-Fang

2006-02-01

The aim of this study was to develop a low shrinkage visible light curable nanocomposite dental restorative material without sacrificing the other properties of conventional materials. This nanocomposite was developed by using an epoxy resin 3,4-epoxycyclohexylmethyl-(3,4-epoxy)cyclohexane carboxylate (ERL4221) matrix with 55% wt of 70-100 nm nanosilica fillers through ring-opening polymerization. GPS (gamma-glycidoxypropyl trimethoxysilane) was used to modify the surfaces of silica nanoparticles. The nanocomposite was shown to exhibit low polymerization shrinkage strain, which is only a quarter of currently used methacrylate-based composites. It also exhibited a low thermal expansion coefficient of 49.8 microm/m degrees C which is comparable to that of the methacrylate based composites (51.2 microm/m degrees C). The strong interfacial interactions between the resin and fillers at nanoscales were demonstrated by an observed high strength and high thermal stability of the nanocomposite. A microhardness of 62 KHN and a tensile strength of 47 MPa were reached. A high degree of conversion ( approximately 70%) can be obtained after less than 60 s of irradiation upon the nanocomposite. A transmission electron microscope (TEM) study of the nanocomposite showed no aggregation of fillers. Comparable results to the methacrylate based composites were obtained from the one day MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) cytotoxicity test. The developed epoxy resin based nanocomposite demonstrated low shrinkage and high strength and is suitable for dental restorative material applications.

CBETA Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffstaetter, G.; Trbojevic, D.; Mayes, C.

This Design Report describes the baseline design of the Cornell-BNL ERL Test Accelerator, as it exists on the date of its publication in June 2017. The Design Report will not change frequently in the future. In contrast, the parameter sheets that summarize the CBETA design will respond as quickly and as thoroughly as necessary to maintain con guration control.

CBETA Design Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffstaetter, G.; Trbojevic, D.; Mayes, C.

This Design Report describes the baseline design of the Cornell-BNL ERL Test Accelerator, as it exists on the date of its publication in June 2017. The Design Report will not change frequently in the future. In contrast, the parameter sheets that summarize the CBETA design will respond as quickly and as thoroughly as necessary to maintain configuration control.

INFLUENCE OF SPAWNING GROUP SIZE AND SPACE ON REPRODUCTION BY SHEEPSHEAD MINNOWS, CYPRINODON VARIEGATUS

EPA Science Inventory

Cripe, G.M., R.L. Hemmer and L.R. Goodman. In press. Influence of Spawning Group Size and Space on Reproduction Variability of Sheepshead Minnows, Cyprinodon variegatus (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB...

TEMPORAL TRENDS IN THE HEALTH OF SOUTH FLORIDA CORAL REEFS

EPA Science Inventory

Barron, M.G., D.L. Santavy, L. MacLaughlin, E. Mueller, E. Peters, B. Quarles and J. Campbell. In press. Temporal Trends in the Health of South Florida Coral Reefs (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R100...

INTERACTIONS BETWEEN NUTRIENTS,PHYTOPLANKTON GROWTH AND MICROZOOPLANKTON GRAZING RATES IN A GULF OF MEXICO ESTUARY

EPA Science Inventory

Juhl, Andrew R. and Michael C. Murrell. Submitted. Phytoplankton Growth and Microzooplankton Grazing in a Gulf of Mexico Estuary. Aquat. Microb. Ecol. 38(1): 147-156, 2005.(ERL,GB 1214).

Dilution grazing experiments were conducted on 9 dates over a 16-month period in Sant...

SEDIMENT TOXICITY AND COMMUNITY COMPOSITION OF BENTHOS AND COLONIZED PERIPHYTON IN THE EVERGLADES - FLORIDA BAY TRANSITIONAL ZONE.

EPA Science Inventory

Lewis, Michael A., Larry R. Goodman, John M. Macauley and James C. Moore. 2004. Sediment Toxicity and Community Composition of Benthos and Colonized Periphyton in the Everglades-Florida Bay Transitional Zone. Ecotoxicology. 13(3):231-244. (ERL,GB 1164).

This survey provid...

EVALUATION OF ENVIRONMENTAL HAZARD ASSESSMENT PROCEDURES FOR NEAR-COASTAL AREAS OF THE GULF OF MEXICO

EPA Science Inventory

Lewis, Michael A. In press. Evaluation of Environmental Hazard Assessment Procedures for Near-Coastal Areas of the Gulf of Mexico (Abstract). To be presented at the Annual Meeting of the the Australasian Society of Ecotoxicology, July 2004, Gold Coast, Australia. 1 p. (ERL,GB R98...

BIOCHEMISTRY OF DINOFLAGELLATE LIPIDS, WITH PARTICULAR REFERENCE TO THE FATTY ACID AND STEROL COMPOSITION OF A KARENIA BREVIS BLOOM

EPA Science Inventory

Leblond, Jeffrey D., Terence J. Evens and Peter J. Chapman. 2003. Biochemistry of Dinoflagellate Lipids, with Particular Reference to the Fatty Acid and Sterol Composition of a Karenia brevis Bloom. Phycologia. 42(4):324-331. (ERL,GB 1160).

The harmful marine dinoflagella...

INDUCTION OF ZONA RADIATA PROTEINS AND VITELLOGENINS IN ESTRADIOL AND NONYLPHENOL EXPOSED MALE SHEEPSHEAD MINNOWS (CYPRINODON VARIEGATUS)

EPA Science Inventory

Knoebl, Iris, Michael J. Hemmer and Nancy D. Denslow. 2004. Induction of Zona Radiata Proteins and Vitellogenins in Estradiol and Nonylphenol Exposed Male Sheepshead Minnows (Cyprinodon variegatus). Mar. Environ. Res. 58(2-5):547-551. (ERL,GB X1059).

Several genes normall...

NOAA Photo Library

Science.gov Websites

NOAA Photo Library Banner Takes you to the Top Page Takes you to the About this Site page. Takes Collections page. Takes you to the search page. Takes you to the Links page. NOAA Photo Library Image Storms Laboratory (NSSL) Collection Credit: NOAA Photo Library, NOAA Central Library; OAR/ERL/National

NOAA Photo Library

Science.gov Websites

NOAA Photo Library Banner Takes you to the Top Page Takes you to the About this Site page. Takes Collections page. Takes you to the search page. Takes you to the Links page. NOAA Photo Library Image Photographer: Jim Leonard Credit: NOAA Photo Library, NOAA Central Library; OAR/ERL/National Severe Storms

NOAA Photo Library

Science.gov Websites

NOAA Photo Library Banner Takes you to the Top Page Takes you to the About this Site page. Takes Collections page. Takes you to the search page. Takes you to the Links page. NOAA Photo Library Image ' Waterspouts" by Joseph H. Golden, NOAA Technical Memorandum ERL NSSL-70, 1974. Library Call Number

NOAA Photo Library

Science.gov Websites

NOAA Photo Library Banner Takes you to the Top Page Takes you to the About this Site page. Takes Collections page. Takes you to the search page. Takes you to the Links page. NOAA Photo Library Image Photo Library, NOAA Central Library; OAR/ERL/National Severe Storms Laboratory (NSSL) Category

NOAA Photo Library

Science.gov Websites

NOAA Photo Library Banner Takes you to the Top Page Takes you to the About this Site page. Takes Collections page. Takes you to the search page. Takes you to the Links page. NOAA Photo Library Image Ainsworth Credit: NOAA Photo Library, NOAA Central Library; OAR/ERL/National Severe Storms Laboratory (NSSL

TOP DOWN CONTROL OF THE MICROBIAL LOOP IN ESTUARINE PHYTOPLANKTON

EPA Science Inventory

Top Down Control of the Microbial Loop in Estuarine Plankton (Abstract). To be presented at the 16th Biennial Conference of the Estuarine Research Foundation, ERF 2001: An Estuarine Odyssey, 4-8 November 2001, St. Pete Beach, FL. 1 p. (ERL,GB R846).

We examined the effects...

MEASURED CONCENTRATIONS OF HERBICIDES AND MODEL PREDICTIONS OF ATRAZINE FATE IN THE PATUXENT RIVER ESTUARY

EPA Science Inventory

McConnell, Laura L., Jennifer A. Harman-Fetcho and James D. Hagy, III. 2004. Measured Concentrations of Herbicides and Model Predictions of Atrazine Fate in the Patuxent River Estuary. J. Environ. Qual. 33(2):594-604. (ERL,GB X1051).

The environmental fate of herbicides i...

TOXICITY OF CLAY FLOCCULATION OF RED TIDE ORGANISMS ON BENTHIC ORGANISMS ERF 2001

EPA Science Inventory

Toxicity of Clay Flocculation of Red Tide Organisms on Benthic Organisms (Abstract). To be presented at the16th Biennial Conference of the Estuarine Research Foundation, ERF 2001: An Estuarine Odyssey, 4-8 November 2001, St. Pete Beach, FL. 1 p. (ERL,GB R854).

We have eva...

Error Reporting Logic

DTIC Science & Technology

2008-06-01

14] Mark Weiser. Program slicing. Trans. Software Engineering , July 1984. 17 ...entitled “Perpetually Available and Secure In- formation Systems”, the Software Industry Center at CMU and its sponsors, especially the Alfred P. Sloan...ERL In Acme, a software architect can choose to associate a handwritten error message to each specification. If the specification fails, for any

Metals concentrations in sediments and oyster Crassostrea gigas from La Pitahaya lagoon, Sinaloa, NW Mexico

NASA Astrophysics Data System (ADS)

Luna Varela, R.; Muñoz Sevilla, N.; Campos Villegas, L.; Rodriguez Espinosa, P.; Gongora Gomez, A.; MP, J.

2013-05-01

This present study was performed in a culture of Crassostrea gigas in La Pitahaya, Sinaloa, México. The main objective is to identify the enrichment pattern of trace elements (Cu, Cd, Cr, Ni, Pb, Zn, Hg, As, V) also was determine concentrations thereof in oyster. Four sampling sites were selected, two smaller channels which connect the lagoon directly , the region of culture and connection with the sea ; and each sampling consisted of 4 sample sediments and 50 oysters of commercial size per mounth . Concentrations of trace metals were determined using atomic absorption spectrophotometry (AAS). The higher concentration of elements in certain samples clearly suggests that they are directly fed by the smaller channels which connect the lagoon directly. These small channels often carry the contaminants which are absorbed and deposited in the sediments. The results were also compared with the Effect Range Low (ERL) and Effect Range Medium (ERM) of NOAA and it indicates that Ni is above the ERL values. Cadmium, lead, chrome and copper concentrations exceeded the limits permissible of bivalbe mollusks established by the sanitary regulations

SERS as a bioassay platform: fundamentals, design, and applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

Porter, M.; Lipert, R.; Siperko, L.

2008-03-18

Bioanalytical science is experiencing a period of unprecedented growth. Drivers behind this growth include the need to detect markers central to human and veterinary diagnostics at ever-lower levels and greater speeds. A set of parallel arguments applies to pathogens with respect to bioterrorism prevention and food and water safety. This tutorial review outlines our recent explorations on the use of surface enhanced Raman scattering (SERS) for detection of proteins, viruses, and microorganisms in heterogeneous immunoassays. It will detail the design and fabrication of the assay platform, including the capture substrate and nanoparticle-based labels. The latter, which is the cornerstone ofmore » our strategy, relies on the construction of gold nanoparticles modified with both an intrinsically strong Raman scatterer and an antibody. This labelling motif, referred to as extrinsic Raman labels (ERLs), takes advantage of the well-established signal enhancement of scatterers when coated on nanometre-sized gold particles, whereas the antibody imparts antigenic specificity. We will also examine the role of plasmon coupling between the ERLs and capture substrate, and challenges related to particle stability, nonspecific adsorption, and assay speed.« less

Multipacting in a grooved choke joint at SRF gun for BNL ERL prototype

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, W.; Ben-Zvi, I.; Belomestnykh, S.

2011-03-28

The 703 MHz superconducting gun for BNL ERL prototype was tested at JLab with and without choke-joint and cathode stalk. Without choke-joint and cathode stalk, the gradient reached was 25 MV/m with Q{sup 0} {approx} 6E9. The gun cathode insertion port is equipped with a grooved choke joint for multipacting suppression. We carried out tests with choke-joint and cathode stalk. The test results show that there are at least two barriers at about 3.5 MV/m and 5 MV/m. We considered several possibilities and finally found that fine details of the grooved shape are important for multipacting suppression. A triangular groovemore » with round crest may cause strong multipacting in the choke-joint at 3.5 MV/m, 5 MV/m and 10 MV/m. This paper presents the primary test results of the gun and discusses the multipacting analysis in the choke-joint. It also suggests possible solutions for the gun and multipacting suppressing for a similar structure.« less

Assessment of heavy metal impact on sediment quality of the Xiaoqinghe estuary in the coastal Laizhou Bay, Bohai Sea: inconsistency between two commonly used criteria.

PubMed

Zhuang, Wen; Gao, Xuelu

2014-06-15

Surface sediments in the Xiaoqinghe estuary, southwestern coastal Laizhou Bay, were examined to assess the bio-toxic risk of heavy metals (Cd, Cu, Ni, Pb and Zn) with the effects range-low and effects range-median guidelines (ERL-ERMs) and the concentration ratio of simultaneously extractable metals to acid volatile sulfides ([SEM]/[AVS]). Based on the ERL-ERM guidelines, bio-toxic effect caused by Cu, Ni, Pb and Zn could be expected in the riverine surface sediments of the Xiaoqinghe estuary; and the surface sediments in the marine area were in good quality and only Ni might cause bio-toxic effect occasionally. The AVS-SEM guidelines revealed that no bio-toxic effect could be caused by any of the studied metals in both the riverine and marine sediments, since there were excess sulfides in surface sediments which could form water-insoluble substances with free metal ions and reduce the bioavailability of heavy metals. Copyright © 2014 Elsevier Ltd. All rights reserved.

Determination of the utility of remote sensing data for land use/cover analysis in the lower Appalachia region: Assessing the utility of remote sensing data for archeological site recognition

NASA Technical Reports Server (NTRS)

Weber, N. V.

1983-01-01

Thematic Mapper Simulator (TMS) data were gathered by NASA/ERL over a portion of the lower Ohio River and the middle Mississippi River valleys on April 11, 1982. CIR imagery accompanied the 10 and 30 meter resolution TMS data sets. This area is somewhat unique archeologically as there exists a concentration of sites with major features such as mounds, earthworks, and villages. It was the primary purpose of this study to determine the utility of TMS data in identifying signatures which are distinctly archeological. TMS data were processed using the NASA/ERL software package ELAS. No signatures that were distinctly archeological were detected, due in large part to the complexity of the land cover and land use practices. However, as more sophisticated classification techniques were employed, the classes which were related to archeological features were narrowed. TMS data could certainly be of assistance to a trained archeologist/interpreter in narrowing an area which has to be field-surveyed as anomalous features can be recognized within a particular environmental context.

Evaluation of a Florida coastal golf complex as a local and watershed source of bioavailable contaminants

EPA Science Inventory

Lewis, Michael A., Robert L. Quarles, Darrin D. Dantin and James C. Moore. 2004. Evaluation of a Coastal Golf Complex as a Local and Watershed Source of Bioavailable Contaminants. Mar. Pollut. Bull. 48(3-4):254-262. (ERL,GB 1183).

Contaminant fate in coastal areas impacte...

75 FR 40014 - Privacy Act of 1974, as Amended; Proposed System of Records and Routine Use Disclosures

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-13

... ERL Database. We will use information covered by the system of records to: Determine persons eligible... Title XVI of the Social Security Act Economic Recovery Payments (ERP); and Provide management information (MI) for the Title II and Title XVI ERPs. We discuss the system of records and routine use...

Angiogenesis Research to Improve Therapies for Vascular Leak Syndromes, Intra-Abdominal Adhesions, and Arterial Injuries

DTIC Science & Technology

2007-02-01

characterization of functional human microvessels in immunodeficient mice. Lab Invest. 2001;81:453-463. 14. Rafii S, Lyden D. Therapeutic stem and progenitor cell... Rafii S, Wu MH, et al. Evidence for circulating bone marrow-derived endothelial cells. Blood. 1998;92:362-367. 32. Hristov M, Erl W, Weber PC

NUTRIENT FLUX AT THE SEDIMENT-WATER INTERFACE IN ESCAMBIA BAY, FL, A NORTHERN GULF OF MEXICO ESTUARY INVITED SEMINAR

EPA Science Inventory

(Abstract). Presented at the University of Texas Marine Science Institute, 30 April 2001, Port Aransas, TX. 1 p. (ERL,GB R841).

Nutrient flux at the sediment-water interface is an integral component of estuarine dynamics, and the benthos may represent a significant source ...

USE OF COMPOSITE DATA SETS FOR SOURCE-TRACKING ENTEROCCOCCI IN THE WATER COLUMN AND SHORELINE INTERSTITIAL WATERS ON PENSACOLA BEACH, FL

EPA Science Inventory

Genthner, Fred J., Joseph B. James, Diane F. Yates and Stephanie D. Friedman. Submitted. Use of Composite Data Sets for Source-Tracking Enterococci in the Water Column and Shoreline Interstitial Waters on Pensacola Beach Florida. Mar. Pollut. Bull. 33 p. (ERL,GB 1212).

So...

GONADAL DEVELOPMENT AND ENDOCRINE RESPONSES IN JAPANESE MEDAKA (ORYZIAS LATIPES) EXPOSED TO O.P'-DDT IN WATER OR THROUGH MATERNAL TRANSFER

EPA Science Inventory

In: Environmental Sciences in the 21st Century: Paradigms, Opportunities, and Challenges: Abstract Book: SETAC 21st Annual Meeting, 12-16 November 2000, Nashville, TN. Society of Environmental Toxicology and Chemistry, Pensacola, FL. Pp. p. 262. (ERL,GB R816).

Various i...

USE OF INTERSPECIES CORRELATION ESTIMATIONS TO PREDICT HC5'S BASED ON MINIMAL DATA

EPA Science Inventory

Dyer, S., S. Belanger, J. Chaney, D. Versteeg and F. Mayer. In press. Use of Interspecies Correlation Estimations to Predict HC5's Based on Minimal Data (Abstract). To be presented at the SETAC Fourth World Congress, 14-18 November 2004, Portland, OR. 1 p. (ERL,GB R1013).

The Anthropocene Biosphere: Supporting 'Open Interdisciplinarity' through Blogging.

PubMed

Trachtenberg, Zev M; Burns, Thomas J; de Beurs, Kirsten; Ellis, Stephen E; Gates, Kiza K; Hoagland, Bruce W; Kelly, Jeffrey F; Neeson, Thomas M; Randall, Asa R; Schlupp, Ingo; Soppelsa, Peter S; Soreghan, Gerilyn S; Zeigler, James J

2017-01-01

This paper describes a process of 'open' interdisciplinary scholarship. Researchers from across the University of Oklahoma blogged about a recent paper by ecologist Erle Ellis, and met in person to discuss posts. They then hosted Ellis for a seminar on questions that emerged, and for a public panel discussion. Copyright © 2016 Elsevier Ltd. All rights reserved.

Das Smart Meter Gateway - Der kritische Erfolgsfaktor für die Digitalisierung der Energiewende

NASA Astrophysics Data System (ADS)

Abs, Paul-Vincent

Der kritische Erfolgsfaktor der Digitalisierung in der Energiewirtschaft liegt im bevorstehenden hohen Investitionsvolumen und der Beherrschung der neuen Technik. Ein Weg zur Kostenminimierung liegt im Zusammenschluss der einzelnen Akteure, um gemeinsame Skalenvorteile zu heben. Auch bieten neue Geschäftsmodelle die Möglichkeit, zusätzliche Erlöse zu generieren.

THE NATIONAL COASTAL ASSESSMENT: PARTNERSHIP FOR SUCCESS COASTAL ZONE SYMPOSIUM, CLEVELAND, OH JULY 15-19, 2001

EPA Science Inventory

Partnering for Success (Abstract). Presented at Coastal Zone 01: Hands Across the Water - Linking Land, Lake, and Sea, 15-19 July 2001, Cleveland, OH. 1 p. (ERL,GB R843).

The National Coastal Assessment (Coastal 2000) is a coastal monitoring survey that responds to the ne...

A data centred method to estimate and map changes in the full distribution of daily surface temperature

NASA Astrophysics Data System (ADS)

Chapman, Sandra; Stainforth, David; Watkins, Nicholas

2016-04-01

Characterizing how our climate is changing includes local information which can inform adaptation planning decisions. This requires quantifying the geographical patterns in changes at specific quantiles or thresholds in distributions of variables such as daily surface temperature. Here we focus on these local changes and on a model independent method to transform daily observations into patterns of local climate change. Our method [1] is a simple mathematical deconstruction of how the difference between two observations from two different time periods can be assigned to the combination of natural statistical variability and/or the consequences of secular climate change. This deconstruction facilitates an assessment of how fast different quantiles of the distributions are changing. This involves both determining which quantiles and geographical locations show the greatest change but also, those at which any change is highly uncertain. For temperature, changes in the distribution itself can yield robust results [2]. We demonstrate how the fundamental timescales of anthropogenic climate change limit the identification of societally relevant aspects of changes. We show that it is nevertheless possible to extract, solely from observations, some confident quantified assessments of change at certain thresholds and locations [3]. We demonstrate this approach using E-OBS gridded data [4] timeseries of local daily surface temperature from specific locations across Europe over the last 60 years. [1] Chapman, S. C., D. A. Stainforth, N. W. Watkins, On estimating long term local climate trends, Phil. Trans. Royal Soc., A,371 20120287 (2013) [2] Stainforth, D. A. S. C. Chapman, N. W. Watkins, Mapping climate change in European temperature distributions, ERL 8, 034031 (2013) [3] Chapman, S. C., Stainforth, D. A., Watkins, N. W. Limits to the quantification of local climate change, ERL 10, 094018 (2015) [4] Haylock M. R. et al ., A European daily high-resolution gridded dataset of surface temperature and precipitation. J. Geophys. Res (Atmospheres), 113, D20119, (2008)

Arizona Libraries: Books to Bytes. Contributed Papers Presented at the AzLA Annual Conference (Phoenix, Arizona, November 17-18, 1995).

ERIC Educational Resources Information Center

Hammond, Carol, Ed.

This document contains three papers presented at the 1995 Arizona Library Association conference. Papers include: (1) "ERLs and URLs: ASU Libraries Database Delivery Through Web Technology" (Dennis Brunning & Philip Konomos), which illustrates how and why the libraries at Arizona State University developed a world wide web server and…

THE ROLE OF REEF FISH IN THE TRANSMISSION DYNAMICS OF BLACK-BAND DISEASE IN THE FLORIDA KEYS

EPA Science Inventory

Aeby, Greta S. and Deborah L. Santavy. In press. Role of Reef Fish in the Transmission Dynamics of Black-Band Disease in the Florida Keys (Abstract). To be presented at the 10th International Coral Reef Symposium, 28 June-2 July 2004, Okinawa, Japan. 1 p. (ERL,GB R998).

T...

THE EFFECT OF AMOUNT OF CRUDE OIL ON EXTENT OF ITS BIODEGRADATION IN OPEN WATER- AND SANDY BEACH- LABORATORY SIMULATIONS

EPA Science Inventory

Lepo, J.E., C. R. Cripe, J.L. Kavanaugh, S. Zhang and G.P. Norton. 2003. Effect of Amount of Crude Oil on Extent of Its Biodegradation in Open Water- and Sandy Beach-Laboratory Simulations. Environ. Technol. 24(10):1291-1302. (ERL,GB 1109).

We examined the biodegradation ...

Messen, Kalibrieren, Eichen in der Radiologie: Prinzipien und Praxis

NASA Astrophysics Data System (ADS)

Wagner, Siegfried R.

Nach einleitender Erläuterung der unterschiedlichen Meßbedingungen in der Strahlentherapie und im Strahlenschutz werden die metrologischen Probleme am Beispiel der Größenkategorie Äquivalentdosis diskutiert. Als spezielle Größen werden effektive Äquivalentdosis und Umgebungs-Äquivalentdosis eingeführt. Es wird gezeigt, wie richtiges Messen durch ein konsistentes System von Bauartanforderungen an Meßgeräte, durch Kalibrieren und durch Eichen gewährleistet werden kann. Die Bedeutung von Meßunsicherheiten und Fehlergrenzen wird erläutert und ihre Auswirkung auf die Interpretation von Meßergebnissen behandelt.Translated AbstractMeasurements, Calibration, Verification in Radiology: Principles and PracticeThe different measuring conditions in radiotherapy and in radiation protection are discussed in the introduction. Then, the metrological problems are discussed exemplarily with the dose equivalent as a category of quantity. Effective dose equivalent and ambient dose equivalent are introduced as special quantities. It is demonstrated, how correct measurements can be secured by a consistent system of instrument pattern requirements, by calibration and verification. The importance of uncertainties of measurements and of error limits is illustrated and their influence on the interpretation of the results of measurements is treated.

Photocathodes for High Repetition Rate Light Sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ben-Zvi, Ilan

2014-04-20

This proposal brought together teams at Brookhaven National Laboratory (BNL), Lawrence Berkeley National Laboratory (LBNL) and Stony Brook University (SBU) to study photocathodes for high repetition rate light sources such as Free Electron Lasers (FEL) and Energy Recovery Linacs (ERL). Below details the Principal Investigators and contact information. Each PI submits separately for a budget through his corresponding institute. The work done under this grant comprises a comprehensive program on critical aspects of the production of the electron beams needed for future user facilities. Our program pioneered in situ and in operando diagnostics for alkali antimonide growth. The focus ismore » on development of photocathodes for high repetition rate Free Electron Lasers (FELs) and Energy Recovery Linacs (ERLs), including testing SRF photoguns, both normal-­conducting and superconducting. Teams from BNL, LBNL and Stony Brook University (SBU) led this research, and coordinated their work over a range of topics. The work leveraged a robust infrastructure of existing facilities and the support was used for carrying out the research at these facilities. The program concentrated in three areas: a) Physics and chemistry of alkali-­antimonide cathodes (BNL – LBNL) b) Development and testing of a diamond amplifier for photocathodes (SBU -­ BNL) c) Tests of both cathodes in superconducting RF photoguns (SBU) and copper RF photoguns (LBNL) Our work made extensive use of synchrotron radiation materials science techniques, such as powder-­ and single-­crystal diffraction, x-­ray fluorescence, EXAFS and variable energy XPS. BNL and LBNL have many complementary facilities at the two light sources associated with these laboratories (NSLS and ALS, respectively); use of these will be a major thrust of our program and bring our understanding of these complex materials to a new level. In addition, CHESS at Cornell will be used to continue seamlessly throughout the NSLS dark period and new diffraction facilities at ALS will be utilized. We also will continue to make use of the excellent analytical facilities at the CNF (BNL) and the Molecular Foundry (LBNL), where we have access to state of the art UHV XPS, SPM, SEM and scanning Auger microscopy.« less

Bug Distribution and Pattern Classification.

DTIC Science & Technology

1985-07-15

Center Educational Psychology University of Leyden San Diego. CA 92152 Urbana. IL 61801 Education Research Center oernaavelaan 2 Dr. Erling B. Andersen...Dr. Dattprasad rlivgi 23314 EN Leyden Department of Statistics Syracuse University The NETHERLANDS 3tudiestraede 6 Department of Psychology 1455...Rebecca Hetter Learning R&D Center Navy Personnel R&D Center University of Pittsburgh Ms. Kathleen Moreno Code 62 Pittsburgh, PA 15260 Navy Personnel R

AN ASSESSMENT OF THE ECOLOGICAL CONDITION OF COASTAL WATERS SURROUNDING THE GULF OF MEXICO IAPSO INTERNATIONAL ASSOCIATION FOR BIOLOGICAL OCEANOGRAPHY MEETING, LA PLATA, ARGENTINA, OCTOBER 2001

EPA Science Inventory

Assessment of the Ecological Condition of Coastal Waters Surrounding the Gulf of Mexico (Abstract). To be presented at the Joint IAPSO/IABO Assembly: 2001 An Ocean Odyssey, 21-26 October 2001, Mar del Plata, Argentina. 1 p. (ERL,GB R844).

The purpose of the Environmental ...

47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

Code of Federal Regulations, 2013 CFR

2013-10-01

... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

Code of Federal Regulations, 2010 CFR

2010-10-01

... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

Code of Federal Regulations, 2012 CFR

2012-10-01

... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

Code of Federal Regulations, 2011 CFR

2011-10-01

... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

47 CFR Appendix I to Subpart E of... - A Procedure for Calculating PCS Signal Levels at Microwave Receivers (Appendix E of the...

Code of Federal Regulations, 2014 CFR

2014-10-01

... Tropospheric Radio Transmission Loss Over Irregular Terrain, A Computer Method-1968”, ESSA Technical Report ERL 79-ITS 67, Institute for Telecommunications Sciences, July 1968. 2. Rice, P.L. Longley, A.G., Norton... January 30, 1985, from G.A. Hufford, identifying modifications to the computer program. 4. Hufford, G.A...

Tropical and Monsoonal Studies.

DTIC Science & Technology

1988-01-01

School. The reearch was partially sup- Fleasle. IL G ., 1947: The fieds of temperattur, psre and three ported by the National Scaenc Foundation under...the three-dimensional structure of the observed -. adK. G . Lum, 1985: Tropical-midlatitude interactions over transient eddy statistics of the...ERL GFDL,6, Newell. R. E., J. W. Kidson, D. G . Vincent and G . J. Boer, 1974: Geophysical Fuid Dynamics Laboratory, Princeton, NJ. The General

EDITORIAL: Dialog on Science and Policy to Address the Climate Crisis to conclude the International Association of Research Universities Climate Congress, Copenhagen, Denmark Dialog on Science and Policy to Address the Climate Crisis to conclude the International Association of Research Universities Climate Congress, Copenhagen, Denmark

NASA Astrophysics Data System (ADS)

Baer, Paul; Kammen, Daniel M.

2009-06-01

This is not the usual Editor-in-Chief letter, namely one that focuses on the accomplishments of the journal—and for ERL they have been numerous this year—but a recognition of the critical time that we are now in when it comes to addressing not only global climate change, but also the dialog between science and politics. In recognition of the many 'tipping points' that we now confront—ideally some of them positive social moments—as well as the clear scientific conclusion that environmental tipping points are points of long-lasting disruption, this paper takes a different form than I might have otherwise written. While the scientific body of knowledge around global environmental change mounts, so too, do the hopeful signs that change can happen. The election of Barack Obama is unquestionably one such sign, witnessed by the exceptional interest that his story has brought not only to US politics, but also to global views of the potential of the United States, as well as to the potential role of science and investigation in addressing pressing issues. In light of these inter-related issues, reproduced here—largely due to the efforts of Paul Baer to transcribe a remarkable conversation—is a dialog not only on the science of global warming and the potential set of means to address this issue, but also on the interaction between research, science and the political process. The dialog itself is sufficiently important that I will dispense with the usual discussion of the exciting recognition that ERL has received with an ISI rating (a factor rapidly increasing), the high levels of downloads of our papers (for some articles over 5000 and counting), and the many news and scientific publications picking up ERL articles (in recent days alone Science, Environmental Science and Technology, and The Economist). This conversation was the concluding plenary session of the 10-12 March International Association of Research Universities (IARU) Conference on Climate Change (http://climatecongress.ku.dk/). Conference Chair Professor Katherine Richardson began the panel by reading the 'key messages'. She then she asked the panelists—Professor Stefan Rahmstorf, Professor Will Steffen, Lord Nicholas Stern, and Professor Dan Kammen to respond. After that, she invited the Danish Prime Minister, Mr Anders Fogh Rasmussen, to respond to the messages. Next there was a dialogue between the panelists and the Prime Minister, with closing remarks from the Prime Minister.

Assessment of metal contamination in surface sediments from Zhelin Bay, the South China Sea.

PubMed

Wang, Zhao-Hui; Feng, Jie; Jiang, Tao; Gu, Yang-Guang

2013-11-15

Metals and biogenic elements were analyzed from surface sediments collected from Zhelin Bay in the South China Sea in December 2008. The high concentrations of TOC, TN and BSi indicate the high nutrient level and diatom productivity in Zhelin Bay. The concentrations of metals were generally far lower than the effects-range-low (ERL) values that define pollutant levels. Enrichment factors (EF) and geoaccumulation indices (Igeo) suggest there are pollution levels of Cd, Cu and Zn at some stations. As, Cu, and Pb are potentially biotoxic in some stations. Correlation and principal component analyses indicate that most of the metals primarily originate from natural sources, and from maricultural activities as well. Mariculture contributes considerable Cd and Cu contamination. As and Pb comes primarily from combustion of gasoline and diesel fuel by ships. Copyright © 2013 Elsevier Ltd. All rights reserved.

Theoretical and Computational Investigation of High-Brightness Beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Chiping

Theoretical and computational investigations of adiabatic thermal beams have been carried out in parameter regimes relevant to the development of advanced high-brightness, high-power accelerators for high-energy physics research and for various applications such as light sources. Most accelerator applications require high-brightness beams. This is true for high-energy accelerators such as linear colliders. It is also true for energy recovery linacs (ERLs) and free electron lasers (FELs) such as x-ray free electron lasers (XFELs). The breakthroughs and highlights in our research in the period from February 1, 2013 to November 30, 2013 were: a) Completion of a preliminary theoretical and computationalmore » study of adiabatic thermal Child-Langmuir flow (Mok, 2013); and b) Presentation of an invited paper entitled ?Adiabatic Thermal Beams in a Periodic Focusing Field? at Space Charge 2013 Workshop, CERN, April 16-19, 2013 (Chen, 2013). In this report, an introductory background for the research project is provided. Basic theory of adiabatic thermal Child-Langmuir flow is reviewed. Results of simulation studies of adiabatic thermal Child-Langmuir flows are discussed.« less

N Reasons Why Production-Rules are Insufficient Models for Expert System Knowledge Representation Schemes

DTIC Science & Technology

1991-02-01

3 2.2 Hybrid Rule/Fact Schemas .............................................................. 3 3 THE LIMITATIONS OF RULE BASED KNOWLEDGE...or hybrid rule/fact schemas. 2 UNCLASSIFIED .WA UNCLASSIFIED ERL-0520-RR 2.1 Propositional Logic The simplest form of production-rules are based upon...requirements which may lead to poor system performance. 2.2 Hybrid Rule/Fact Schemas Hybrid rule/fact relationships (also known as Predicate Calculus ) have

Distribution, Source, and Ecological Risk Assessment of Polycyclic Aromatic Hydrocarbons in Surface Sediment of Liaodong Bay, Northeast China

NASA Astrophysics Data System (ADS)

Xu, Shuang; Tao, Ping; Li, Yuxia; Guo, Qi; Zhang, Yan; Wang, Man; Jia, Hongliang; Shao, Mihua

2018-01-01

Sixteen polycyclic aromatic hydrocarbons (PAHs) were determined in surface sediments from Liaodong Bay, northeast China. The concentration levels of total PAHs (Σ16PAHs) in sediment were 11.0˜249.6 ng·g-1 dry weight (dw), with a mean value of 89.9 ng·g-1 dry weight (dw). From the point of the spatial distribution, high PAHs levels were found in the western areas of Liaodong Bay. In the paper, sources of PAHs were investigated by diagnostic ratios, which indicated that pyrogenic sources were the main sources of PAHs in the sediment of Liaodong Bay. Therefore, selected PAH levels in sediments were compared with Sediments Quality Guidelines (ERM-ERL indexes) for evaluation probable toxic effects on marine organism.

Enrichment and geo-accumulation of heavy metals and risk assessment of sediments of the Kurang Nallah--feeding tributary of the Rawal Lake Reservoir, Pakistan.

PubMed

Zahra, Azmat; Hashmi, Muhammad Zaffar; Malik, Riffat Naseem; Ahmed, Zulkifl

2014-02-01

Heavy metal concentrations in sediments of the Kurang stream: a principal feeding tributary of the Rawal Lake Reservoir were investigated using enrichment factor (EF), geoaccumulation index (Igeo) and metal pollution index (MPI) to determine metal accumulation, distribution and its pollution status. Sediment samples were collected from twenty one sites during two year monitoring in pre- and post-monsoon seasons (2007-2008). Heavy metal toxicity risk was assessed using Sediment Quality Guidelines (SQGs), effect range low/effect range median values (ERL/ERM), and threshold effect level/probable effect level (TEL/PEL). Greater mean concentrations of Ni, Mn and Pb were recorded in post-monsoon season whereas metal accumulation pattern in pre-monsoon season followed the order: Zn>Mn>Ni>Cr>Co>Cd>Pb>Cu>Li. Enrichment factor (EF) and geoaccumulation (Igeo) values showed that sediments were loaded with Cd, Zn, Ni and Mn. Comparison with uncontaminated background values showed higher concentrations of Cd, Zn and Ni than respective average shale values. Concentrations of Ni and Zn were above ERL values; however, Ni concentration exceeded the ERM values. Sediment contamination was attributed to anthropogenic and natural processes. The results can be used for effective management of fresh water hilly streams of Pakistan. © 2013.

Controlling the Release of Indomethacin from Glass Solutions Layered with a Rate Controlling Membrane Using Fluid-Bed Processing. Part 2: The Influence of Formulation Parameters on Drug Release.

PubMed

Dereymaker, Aswin; Pelgrims, Jirka; Engelen, Frederik; Adriaensens, Peter; Van den Mooter, Guy

2017-04-03

This study aimed to investigate the pharmaceutical performance of an indomethacin-polyvinylpyrrolidone (PVP) glass solution applied using fluid bed processing as a layer on inert sucrose spheres and subsequently top-coated with a release rate controlling membrane consisting of either ethyl cellulose or Eudragit RL. The implications of the addition of a pore former (PVP) and the coating medium (ethanol or water) on the diffusion and release behavior were also considered. In addition, the role of a charge interaction between drug and controlled release polymer on the release was investigated. Diffusion experiments pointed to the influence of pore former concentration, rate controlling polymer type, and coating solvent on the permeability of the controlled release membranes. This can be translated to drug release tests, which show the potential of diffusion tests as a preliminary screening test and that diffusion is the main factor influencing release. Drug release tests also showed the effect of coating layer thickness. A charge interaction between INDO and ERL was demonstrated, but this had no negative effect on drug release. The higher diffusion and release observed in ERL-based rate controlling membranes was explained by a higher hydrophilicity, compared to EC.

Fraction distribution and risk assessment of heavy metals in waste clay sediment discharged through the phosphate beneficiation process in Jordan.

PubMed

Al-Hwaiti, Mohammad Salem; Brumsack, Hans Jurgen; Schnetger, Bernhard

2015-07-01

Heavy metal contamination of clay waste through the phosphate beneficiation process is a serious problem faced by scientists and regulators worldwide. Through the beneficiation process, heavy metals naturally present in the phosphate rocks became concentrated in the clay waste. This study evaluated the concentration of heavy metals and their fractions in the clay waste in order to assess the risk of environmental contamination. A five-step sequential extraction method, the risk assessment code (RAC), effects range low (ERL), effects range medium (ERM), the lowest effect level (LEL), the severe effect level (SEL), the redistribution index (U tf), the reduced partition index (I), residual partition index (I R), and the Nemerow multi-factor index (PC) were used to assess for clay waste contamination. Heavy metals were analyzed using high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) and inductively coupled plasma optical emission spectroscopy (ICP-OES). Correlation analyses were carried out to better understand the relationships between the chemical characteristics and the contents of the different phase fractions. Concentrations of Cd and Cu confirmed that both were bound to the exchangeable fraction (F1) and the carbonate fraction (F2), presenting higher mobility, whereas Pb was most abundant in the Fe-Mn oxide fraction (F3) and organic matter fraction (F4). The residual fraction (F5) contained the highest concentrations (>60%) of As, Cr, Mo, V, and Zn, with lower mobility. Application of the RAC index showed that Cd and Cu should be considered a moderate risk, whereas As, Cr, Mo, Pb, and Zn presented a low risk. Cadmium and Cu contents in mobile fractions F1 and F2 were higher than ERL but lower than ERM. On the other hand, As, Pb, and Zn contents of mobile fractions F1 and F2 were lower than ERL and ERM guideline values. Moreover, total Pb concentrations in the clay waste were below the lowest effect level (LEL) threshold value period, Cr and Zn values in the clay waste were determined to have exceeded the severe effect level (SEL) limit values, whereas Cd and Cu level ranges between LEL and SEL indicate moderate contamination. I R values of heavy metals in the clay waste confirmed that Cd and Cu were bound to the exchangeable and carbonate fractions and presented higher mobility, whereas As, Cr, Mo, Pb, V, and Zn were bound to organic or residual fractions and consequently exhibit lower mobility. A Nemerow multi-factor index revealed that the mine site contains high levels of Cd, Cu, V, and Zn pollution. As and Cr were found at a moderate level of contamination, whereas Pb was present at a safe level of contamination. The order of the comprehensive contamination indices was Cd > Cu > Mo > Zn > V > Cr > As > Pb, indicating that the assessment of clay waste, especially with Cd and Cu, should be undertaken to control heavy metal contamination in adjacent urban and mine areas at the Eshidiya mines.

Enhanced Life Prediction Technology for Engine Rotor Life Extension (ERLE)

DTIC Science & Technology

2008-09-01

related a0 to dislocation pileups and mode II shear cracks, and found satisfactory agreement with small-crack data from titanium aluminides . Tanaka...Symp. Gamma Titanium Aluminides , TMS, 1999, pp. 517-525. [11] K. Tanaka, Y. Nakai, and M. Yamashita, “Fatigue Growth Threshold of Small Cracks...between his formulation and a variety of experimental data. While titanium was not included in the Tanaka comparisons, Brown and Taylor [12] have

National Oceanographic Fleet Operating Schedules for 1983.

DTIC Science & Technology

1983-01-01

England Coast (203)446-1020, SE Branch, Avery Point Long Island Ext. 211 Groton, Connecticut 06340 Sound Marine Sciences Research ONRUST 55 New York...SCHEDULE FOR PERIOD 01 JAN 83 THRU 31 DEC 83 OO e eOgO egOS o S.O.S. 06000 00 ee o655 00 ERL NOAA DEP: 01 FEB 83 SEATTLE MARINE MAMMALS eRR: 23 FE! 03...49 COLUMBUS ISELIN ..................................................... 52 MOSS LANDING MARINE LABORATORIES CAYUSE

Structure Formation in Solutions of Rigid Polymers Undergoing a Phase Transition

DTIC Science & Technology

1987-04-01

cyclohexene dioxide (ERL-4206) - 10 g. nonenyl succinic anhydride (NSA) - 26 g. dimethyl amino ethanol ( DMAE ) - 0.4 g. After infiltration, short segments...existence of a significant number of defects within the individual microfibril. The presence of defects in the lateral packing of PBT chains is also suggested...of the D- and L- enantiomers yields a nematic phase. The ordered phases exhi- bit complex textures due to defects (disclinations) which depend on

Influence of distance to urban markets on smallholder dairy farming systems in Kenya.

PubMed

Migose, S A; Bebe, B O; de Boer, I J M; Oosting, S J

2018-03-28

We studied influence of distance to urban markets on smallholder dairy farming system development. Farms were chosen from three locations that varied in distance to the urban market of Nakuru Town in the Kenyan highlands: urban location (UL, n = 10) at less than 15 km distance, mid-rural location (MRL, n = 11) in between 20 and 50 km west of Nakuru and extreme rural location (ERL, n = 9) beyond 50 km west and south-west of Nakuru. In-depth interviews with farmers and focus group discussions with eight groups of stakeholders were held to collect narratives and data about market quality, production factors, farm performance and functions of dairy cattle. We applied thematic content analysis to qualitative information by clustering narratives according to predefined themes and used ANOVA to analyse farm data. In UL, markets were functional, with predominantly informal market chains, with a high milk price (US $ 45.1/100 kg). Inputs were available in UL markets, but prices were high for inputs such as concentrates, fodder, replacement stock and hired labour. Moreover, availability of grazing land and the high opportunity costs for family labour were limiting dairy activities. In UL, milk production per cow (6.9 kg/cow/day) and per farm (20.1 kg/farm/day) were relatively low, and we concluded that farm development was constrained by scarcity of inputs and production factors. In rural locations (MRL and ERL), markets were functional with relatively low prices (average US $ 32.8/100 kg) for milk in both formal and informal market chains. Here, concentrates were relatively cheap but also of low quality. Fodder, replacement stock and labour were more available in rural locations than in UL. In rural locations, milk production per cow (average 7.2 kg/cow/day) and per farm (average 18.5 kg/farm/day) were low, and we concluded that farm development was constrained by low quality of concentrates and low price of milk. In all locations, production for subsistence was valued since income generated was used for non-dairy expenses. A tailor-made package of interventions that targets the above constraints is recommended for farm development.

An Assessment of the Crossed Porro Prism Resonator

DTIC Science & Technology

1980-08-01

to P n 7 + 4tan-{(4( 1 - 2/(n) 2) In the laser, the plane polarised beam from the polarising beam splitter ERL-OI(2-TM - 2 - will, on emerging from... Beam intensities in resonators 17. Ray path rotation in crossed porro resonator 18. Elliptically polarised light ray - I I•HI,-O ,-0162-IM I...military laser rangefinder and designator applications. This paper reviews the properties of these devices and examines the advantages over normal mirror

Spatial distribution and potential biological risk of some metals in relation to granulometric content in core sediments from Chilika Lake, India.

PubMed

Barik, Saroja K; Muduli, Pradipta R; Mohanty, Bita; Rath, Prasanta; Samanta, Srikanta

2018-01-01

The article presents first systematic report on the concentration of selected major elements [iron (Fe) and manganese (Mn)] and minor elements [zinc (Zn), copper (Cu), chromium (Cr), lead (Pb), nickel (Ni), and cobalt (Co)] from the core sediment of Chilika Lake, India. The analyzed samples revealed higher content of Pb than the background levels in the entire study area. The extent of contamination from minor and major elements is expressed by assessing (i) the metal enrichments in the sediment through the calculations of anthropogenic factor (AF), pollution load index (PLI), Enrichment factor (EF), and geoaccumulation index (Igeo) and (ii) potential biological risks by the use of sediment quality guidelines like effect range median (ERM) and effect range low (ERL) benchmarks. The estimated indices indicated that sediment is enriched with Pb, Ni, Cr, Cu and Co. The enrichment of these elements seems to be due to the fine granulometric characteristics of the sediment with Fe and Mn oxyhydroxides being the main metal carriers and fishing boats using low grade paints, fuel, and fishing technology using lead beads fixed to fishing nets. Trace element input to the Chilika lake needs to be monitored with due emphasis on Cr and Pb contaminations since the ERM and ERL benchmarks indicated potential biological risk with these metals.

[Diagnostic value of a predictive model for complete ruptures of the rotator cuff associated to subacromial impingement].

PubMed

Águila-Ledesma, I R; Córdova-Fonseca, J L; Medina-Pontaza, O; Núñez-Gómez, D A; Calvache-García, C; Pérez-Atanasio, J M; Torres-González, R

2017-01-01

Pathology related to the rotator cuff remains among the most prevalent musculoskeletal diseases. There is an increasing need for imaging studies (MRI, US, arthroscopy) to test the diagnostic performance of the medical history and physical examination. To prove the diagnostic value of a clinical-radiographic predictive model to find complete ruptures of the rotator cuff. Descriptive, observational, prospective, transversal and analytical study. Fifty-five patients with preoperative shoulder pain were evaluated with 13 predictive variables: age > 50 years, nocturnal pain, muscle weakness, clinical signs of Neer, Hawkins, Jobe, external rotation lag (ERLS), belly-press, bear hug, and lift-off, radiographic measurement of subacromial space, acromial index and critical shoulder angle. Sensitivity, specificity, and positive and negative predictive values were measured in each variable, comparing the results of each one against the postoperative findings. Of the 55 patients evaluated, 42 had a complete rupture of the rotator cuff in the postoperative period. The eight variables with a higher diagnostic value were selected and a ROC curve was performed, providing an area under the curve of 0.88. This predictive model uses eight variables (age > 50 years, nocturnal pain, muscle weakness, Jobe, Hawkins, ERLS, subacromial space ≤ 6 mm, and critical shoulder angle > 35°), which together add the predictive value of 0.88 (AUC) to diagnose complete ruptures of the supraspinatus tendon.

A Comprehensive Investigation and Coupler Design for Higher-Order Modes in the BNL Energy Recovery Linear Accelerator

NASA Astrophysics Data System (ADS)

Marques, Carlos

A next generation Energy Recovery Linac (ERL) is under development in the Collider-Accelerator Department at Brookhaven National Laboratory (BNL). This ERL uses a superconducting radio frequency (SFR) cavity to produce an electric field gradient ideal to accelerate charged particles. As with many accelerators, higher-order modes (HOMs) can be induced by a beam of charged particles traversing the linear accelerator cavity. The excitation of these modes can result in problematic single and multi-bunch effects and also produce undesirable heat loads to the cryogenic system. Understanding HOM prevalence and structure inside the accelerator cavity is crucial for devising a procedure for extracting HOM power and promoting excellent beam quality. In this work, a method was created to identify and characterize HOMs using a perturbation technique on a copper (Cu) cavity prototype of the BNL3 linac and a double lambda/4 crab cavity. Both analyses and correlation between simulated and measured results are shown. A coaxial to dual-ridge waveguide HOM coupler was designed, constructed and implemented to extract power from HOMs simultaneously making an evanescent fundamental mode for the BNL3 cavity. A full description of the design is given along with a simulated analysis of its performance. Comparison between previous HOM coupler designs as well as correspondence between simulation and measurement is also given.

Linear beam dynamics and ampere class superconducting RF cavities at RHIC

NASA Astrophysics Data System (ADS)

Calaga, Rama R.

The Relativistic Heavy Ion Collider (RHIC) is a hadron collider designed to collide a range of ions from protons to gold. RHIC operations began in 2000 and has successfully completed five physics runs with several species including gold, deuteron, copper, and polarized protons. Linear optics and coupling are fundamental issues affecting the collider performance. Measurement and correction of optics and coupling are important to maximize the luminosity and sustain stable operation. A numerical approach, first developed at SLAC, was implemented to measure linear optics from coherent betatron oscillations generated by ac dipoles and recorded at multiple beam position monitors (BPMs) distributed around the collider. The approach is extended to a fully coupled 2D case and equivalence relationships between Hamiltonian and matrix formalisms are derived. Detailed measurements of the transverse coupling terms are carried out at RHIC and correction strategies are applied to compensate coupling both locally and globally. A statistical approach to determine BPM reliability and performance over the past three runs and future improvements also discussed. Aiming at a ten-fold increase in the average heavy-ion luminosity, electron cooling is the enabling technology for the next luminosity upgrade (RHIC II). Cooling gold ion beams at 100 GeV/nucleon requires an electron beam of approximately 54 MeV and a high average current in the range of 50-200 mA. All existing e-Coolers are based on low energy DC accelerators. The only viable option to generate high current, high energy, low emittance CW electron beam is through a superconducting energy-recovery linac (SC-ERL). In this option, an electron beam from a superconducting injector gun is accelerated using a high gradient (˜ 20 MV/m) superconducting RF (SRF) cavity. The electrons are returned back to the cavity with a 180° phase shift to recover the energy back into the cavity before being dumped. A design and development of a half-cell electron gun and a five-cell SRF linac cavity are presented. Several RF and beam dynamics issues ultimately resulting in an optimum cavity design are discussed in detail.

Station Climatic Summaries, Asia

DTIC Science & Technology

1989-07-01

488640 7108 (CB) ......................................................... 589 CON SON/POULO CONDORE 489180 7105 (CB...STATION NAME BAHRAIN/KJS4ARR9AQ LoM4AIN pERlIOD: FEB 49-FES 81 9 STIN LYtS: 0111 MARCH 1982 LOCATION N26 17 EOS0 Z,7 ILEV 6 FT w gMo .; 325031 wwMoO. m A...357 0 WCLIMATBRIEF OABU NOME LUZON I, PHILIPPINEs PERIOO:1949-63 ’WMO * 98223 Pro ed by ETAC ( MAR 1972 N 1811 E120 2 FIELD ELEMTION: 13 ftSTNLTRS: RPML

NASA's Earth Resources Laboratory - Seventeen years of using remotely sensed satellite data in land applications

NASA Technical Reports Server (NTRS)

Cashion, Kenneth D.; Whitehurst, Charles A.

1987-01-01

The activities of the Earth Resources Laboratoy (ERL) for the past seventeen years are reviewed with particular reference to four typical applications demonstrating the use of remotely sensed data in a geobased information system context. The applications discussed are: a fire control model for the Olympic National Park; wildlife habitat modeling; a resource inventory system including a potential soil erosion model; and a corridor analysis model for locating routes between geographical locations. Some future applications are also discussed.

Impedance simulation for LEReC booster cavity transformed from ERL gun cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Chuyu

2015-11-24

Wake impedance induced energy spread is a concern for the low energy cooling electron beam. The impedance simulation of the booster cavity for the LEReC projection is presented in this report. The simulation is done for both non-relativistic and ultra-relativistic cases. The space charge impedance in the first case is discussed. For impedance budget consideration of the electron machine, only simulation of the geometrical impedance in the latter case is necessary since space charge is considered separately.

Compaction managed mirror bend achromat

DOEpatents

Douglas, David [Yorktown, VA

2005-10-18

A method for controlling the momentum compaction in a beam of charged particles. The method includes a compaction-managed mirror bend achromat (CMMBA) that provides a beamline design that retains the large momentum acceptance of a conventional mirror bend achromat. The CMMBA also provides the ability to tailor the system momentum compaction spectrum as desired for specific applications. The CMMBA enables magnetostatic management of the longitudinal phase space in Energy Recovery Linacs (ERLs) thereby alleviating the need for harmonic linearization of the RF waveform.

Grundlagen der Nachrichtenübertragung

NASA Astrophysics Data System (ADS)

Plaßmann, Wilfried

Die Nachrichtentechnik hat die Aufgabe, Nachrichten auszutauschen. Nachrichten sind z. B. Fragen, Beobachtungen und Befehle. Unter dem Begriff Nachrichtenübertragung wird hier die elektrische Nachrichtenübertragung verstanden, denn zur Übermittlung von Nachrichten werden Spannungen und Ströme sowie elektrische und magnetische Felder eingesetzt. Die Übertragung beginnt mit der Nachrichtenquelle, die die Nachrichten aussendet, und endet mit der Nachrichtensenke, die sie empfängt. Zwischen beiden liegt das elektrische Nachrichtenübertragungssystem, dessen Funktionseinheiten dargestellt sind und erläutert werden.

Banach Synaptic Algebras

NASA Astrophysics Data System (ADS)

Foulis, David J.; Pulmannov, Sylvia

2018-04-01

Using a representation theorem of Erik Alfsen, Frederic Schultz, and Erling Størmer for special JB-algebras, we prove that a synaptic algebra is norm complete (i.e., Banach) if and only if it is isomorphic to the self-adjoint part of a Rickart C∗-algebra. Also, we give conditions on a Banach synaptic algebra that are equivalent to the condition that it is isomorphic to the self-adjoint part of an AW∗-algebra. Moreover, we study some relationships between synaptic algebras and so-called generalized Hermitian algebras.

The identity of Hyla leucotaenia Burmeister, 1861 (Anura: Hylidae).

PubMed

Pinheiro, Paulo D P; Faivovich, Julián; Langone, José A; Kwet, Axel

2014-11-13

The German naturalist Carl Hermann Conrad Burmeister (1807-1892) had a prolific scientific career, spanning multiple taxa from diverse insect groups and trilobites to temnospondyls, birds, and extant and fossil mammals (see Berg, 1895). His contributions to anuran taxonomy are concentrated in two books, "Erläuterungen zur Fauna Brasiliensis…" (Burmeister, 1856) and "Reise durch die La Plata-Staaten…" (Burmeister, 1861). The latter is an account of his travels in Argentina and Uruguay from 1857-1860 and includes descriptions of three new species of frogs: Leiuperus nebulosus, Cystignathus mystacinus, and Hyla leucotaenia. While the first two names currently designate valid species, with the combinations Pleurodema nebulosum and Leptodactylus mystacinus respectively, the last name has had a more complex taxonomic history. It involves confusions involving a homonym, its consideration as a junior synonym of Hypsiboas pulchellus (Duméril & Bibron, 1841)-a widely distributed species in eastern Argentina, southeastern Brazil, and Uruguay (Frost, 2014)-and its actual identity corresponding to another widespread species in the same geographic area, with which it has never before been associated: Scinax squalirostris (A. Lutz, 1925). All these issues are discussed in this paper.

Two design of the S4.BEN01 magnet for the CBETA splitter/merger

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsoupas, N.; Berg, S.; Meot, F.

2017-04-10

The splitter/merger section of the CBETA project [1] consists of 4 beam lines as shown in Fig. 1. Two of the functions of the splitter’s/merger’s lines is to match the beam parameters at the exit of the Energy Recovery Linac (ERL) to the beam parameters at the entrance of the Fixed Field Alternating Gradient (FFAG) arc, and also place the reference particles of the beam bunches at the entrance of the FFAG arc on specified trajectories according to their energies. In this technical note we are presenting results from the 2D and 3D electromagnetic analysis of the S4.BEN01 magnet whichmore » is one of the dipole magnets of the 150 MeV line of the splitter/merger. In particular we present results from two designs of the S4.BEN01 magnet, one based on iron dominated current-excited magnet, and the other design based on Halbach-type permanent magnet. An evaluation of the two designs will be given in the section under “conclusion”.« less

EDITORIAL: Global impacts of particulate matter air pollution

NASA Astrophysics Data System (ADS)

Bell, Michelle L.; Holloway, Tracey

2007-10-01

Even in well-studied, data-rich regions of the United States and Europe, understanding ambient particulate matter (PM, aka aerosols) remains a challenge. Atmospheric aerosols exhibit chemical heterogeneity, spatial and seasonal variability, and result in a wide range of health impacts (mortality, respiratory disease, cardiovascular disease, eye irritation, and others). In addition, aerosols play an important role in climate, exerting warming effects (black carbon), cooling effects (sulfate and organic carbon), and affecting precipitation and cloud cover. Characterizing the emission sources, concentrations, transport patterns, and impacts is particularly difficult in developing countries, where data are scarce, emissions are high, and health impacts are often severe. We are pleased to present this focus issue of Environmental Research Letters (ERL) devoted to the study of PM on an international scale. Our authors are leading researchers who each bring cross-cutting analysis to this critical health and environmental issue. Collectively, the research presented here contributes to our understanding of PM sources, processes, and impacts, while highlighting key steps forward. In this issue, Zhang et al examine the size distribution and composition of emitted anthropogenic PM in China, finding that the characteristics of primary aerosol emissions differ significantly between industrialized and developing regions in China. Concentration measurements of PM, like detailed emissions inventories, are rare in the developing world. van Vliet and Kinney analyze fine particles in Nairobi based on monitoring data for PM2.5 and black carbon. Using measurements from multiple locations of differing proximity to roadways, the authors evaluate traffic-source contributions to PM exposure. The impact of emission location and exposed population are also evaluated by Liu and Mauzerall, but on a continent-to-continent scale. The authors quantify the connection between SO2 emissions and sulfate aerosol exposure (both domestically and on downwind continents), while presenting a new metric to quantify the impact of distance on health-relevant exposure: the 'influence potential'. Extending the scope of aerosol impacts from health to climate, Bond outlines the barriers to including aerosols in climate agreements, and proposes solutions to facilitate the integration of this key climate species in a policy context. Together, the articles scope out the state-of-the-science with respect to key issues in international air pollution. All four studies advance understanding the human health implications of air pollution, by drawing from worldwide data sources and considering a global perspective on key processes and impacts. To extend exposure estimates, like those of van Vliet and Kinney or Liu and Mauzerall, and to evaluate the induced physiological response of PM exposure, typically existing dose response relationships are applied. Unfortunately, the common practice of applying health response estimates from one location to another is problematic. In addition to potential differences in the chemical composition of particles, the underlying populations may differ with respect to their baseline health status, occupational exposures, age and gender distribution, and behavioral factors such as nutrition and smoking habits. Health response to a given stressor is affected by the quality of and access to health care, which varies widely, and can be almost non-existent in some regions of developing countries. Further, exposure to ambient PM is affected by the relative fraction of time spent in different settings (e.g., work, home, outside, in transit), the activities that affect ventilation rate (e.g., exercising heavily versus sitting still), and housing characteristics that alter the penetration of outdoor particles into indoor environments (e.g., housing materials, windows, air conditioning). To make the most of exposure estimates, the 'missing link' is the development of dose response relationships that take into account how the high degree of source and demographic variability affect PM health response. We look forward to the continued growth of research in ERL contributing to air pollution emissions, distribution, and impacts. As the integrated study of air quality connects to economics, energy, agriculture, meteorology, climate change, and public health—among other subjects—its advancement is well-suited to an interdisciplinary, open-access journal like ERL. Thanks to our authors for contributing to ERL's growth in global air pollution research with such excellent work. Focus on Global Impacts of Particulate Matter Air Pollution Contents The articles below represent the first accepted contributions and further additions will appear in the near future. Major components of China's anthropogenic primary particulate emissions Qiang Zhang, David G Streets, Kebin He and Zbigniew Klimont Impacts of roadway emissions on urban particulate matter concentrations in sub-Saharan Africa: new evidence from Nairobi, Kenya E D S van Vliet and P L Kinney Potential influence of inter-continental transport of sulfate aerosols on air quality Junfeng Liu and Denise L Mauzerall Can warming particles enter global climate discussions? Tami C Bond

Environmental impact of heavy metals on the soils and plants around a coke-making factory of Jiyuan city, China

NASA Astrophysics Data System (ADS)

Lun Leung, Kwun

2010-05-01

The combustion of coal usually leads to many different kinds of pollution around coke-making factories. Among these pollutions, the heavy metal contamination in the soil and plants is one of the major concerns by people living around. Heavy metals are highly attracted to the biological tissue, and can stay in bodies of organisms for long period of time, causing a lot of hazardous diseases to human beings, animal and plants. In the developing regions of China, developing of industries has been based on the sacrifices of environments and human health. In order to evaluate the danger of heavy metal contamination from a coke factory to citizens of close inhabitants, a survey on soil and plants was conducted in the region around a coke-making factory in Jiyuan city, which is a major electricity supplying city for the Henan Province in China. In this study, 8 surface soil samples and 11 plant samples were collected from 8 different places around the coke-making factory in Jiyuan city. The collected samples are then treated in the laboratory, and 8 types of heavy metals, which include arsenic, cadmium, chromium, cobalt, copper, lead, nickel and zinc, are analyzed by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) and Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES). The concentration data of heavy metals that collected from the analysis are then used to evaluate their toxicity towards living organisms and ecology by applying several biological effect standards, such as effect-range low (ERL), effect-range median (ERM) and several maximum allowances standards of heavy metal concentrations in soils and plants that established by different countries. Moreover, the relationship between the distance from the factory and the concentration of heavy metals in soils and plants are also evaluated in order to find out the contamination ranges of those heavy metals from the source. The result shows that the concentration of these 8 types of heavy metals in the site exceeds the ERL, with lead being the heavy metals that exceeds the biological effect standards the most. This study suggests some remediate measures that must be made in order to decrease the emission of these elements to meet the national standards. The local government is now realized the problems and begins to limit the emissions and offers medical treatments to kids detected with high blood lead.

Calculation and evaluation of sediment effect concentrations for the amphipod Hyalella azteca and the midge Chironomus riparius

USGS Publications Warehouse

Ingersoll, Christopher G.; Haverland, Pamela S.; Brunson, Eric L.; Canfield, Timothy J.; Dwyer, F. James; Henke, Chris; Kemble, Nile E.; Mount, David R.; Fox, Richard G.

1996-01-01

Procedures are described for calculating and evaluating sediment effect concentrations (SECs) using laboratory data on the toxicity of contaminants associated with field-collected sediment to the amphipod Hyalella azteca and the midge Chironomus riparius. SECs are defined as the concentrations of individual contaminants in sediment below which toxicity is rarely observed and above which toxicity is frequently observed. The objective of the present study was to develop SECs to classify toxicity data for Great Lake sediment samples tested with Hyalella azteca and Chironomus riparius. This SEC database included samples from additional sites across the United States in order to make the database as robust as possible. Three types of SECs were calculated from these data: (1) Effect Range Low (ERL) and Effect Range Median (ERM), (2) Threshold Effect Level (TEL) and Probable Effect Level (PEL), and (3) No Effect Concentration (NEC). We were able to calculate SECs primarily for total metals, simultaneously extracted metals, polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs). The ranges of concentrations in sediment were too narrow in our database to adequately evaluate SECs for butyltins, methyl mercury, polychlorinated dioxins and furans, or chlorinated pesticides. About 60 to 80% of the sediment samples in the database are correctly classified as toxic or not toxic depending on type of SEC evaluated. ERMs and ERLs are generally as reliable as paired PELs and TELs at classifying both toxic and non-toxic samples in our database. Reliability of the SECs in terms of correctly classifying sediment samples is similar between ERMs and NECs; however, ERMs minimize Type I error (false positives) relative to ERLs and minimize Type II error (false negatives) relative to NECs. Correct classification of samples can be improved by using only the most reliable individual SECs for chemicals (i.e., those with a higher percentage of correct classification). SECs calculated using sediment concentrations normalized to total organic carbon (TOC) concentrations did not improve the reliability compared to SECs calculated using dry-weight concentrations. The range of TOC concentrations in our database was relatively narrow compared to the ranges of contaminant concentrations. Therefore, normalizing dry-weight concentrations to a relatively narrow range of TOC concentrations had little influence on relative concentra of contaminants among samples. When SECs are used to conduct a preliminary screening to predict the potential for toxicity in the absence of actual toxicity testing, a low number of SEC exceedances should be used to minimize the potential for false negatives; however, the risk of accepting higher false positives is increased.

Schaltungsunterlagen

NASA Astrophysics Data System (ADS)

Döring, Peter

Beim Zeichnen von Schaltplänen werden alle zugehörigen Maschinen, Geräte, Schaltteile und Leitungen nicht maßstabsgetreu und der tatsächlichen Ausführung ähnlich gezeichnet, sondern durch genormte graphische Symbole dargestellt. Die Ausführungen in diesem Kapitel sollen dazu eine Hilfestellung geben. Behandelt werden folgende Themen: Wichtige VDE-Bestimmungen; Diagrammdarstellungen; Schaltzeichen nach DIN; Kennzeichnung von elektrischen Betriebsmitteln; Schaltungsunterlagen der Energietechnik; Schaltungsunterlagen der Elektronik; Schaltzeichen für Binäre Elemente; Entwurf von Schaltungen: Einzelplatinen, Gedruckte Schaltungen; Projektierung. Zahlreiche Tabellen und Abbildungen dienen zur Erläuterung.

Beam position monitor for energy recovered linac beams

DOE Office of Scientific and Technical Information (OSTI.GOV)

Powers, Thomas; Evtushenko, Pavel

A method of determining the beam position in an energy recovered linac (ERL). The method makes use of in phase and quadrature (I/Q) demodulation techniques to separate the pickup signal generated by the electromagnetic fields generated by the first and second pass beam in the energy recovered linac. The method includes using analog or digital based I/Q demodulation techniques in order to measure the relative amplitude of the signals from a position sensitive beam pickup such as a button, strip line or microstripline beam position monitor.

Standardized Extended Caution Indices and Comparisons of their Rule Detection Rates.

DTIC Science & Technology

1982-03-01

RESEARCH REPORT S -4-ONR M87CH 2M 󈨖 07 23 008 Copies of this report may be requested from: Kikumi K. Tatsuoka 252 ERL 103 S . Hathevs University of Illinois...DOCUMENTATION PAGE IM" WSpgyTJUCT 2GOVT ACCESSION NO 3. RECIPIZNT’S CATALOG NUMBER Research Report 82-4-ONR /r / IC TITLE (and Iaab*il) S . TYPE OF REPORT...AUTIIORfe) 11. CONTRACT OR GRANT NUMNE~ s ) Kikuni K. Tatsuoka & Maurice M. Tatsuoka N00014-79-C-0752 9. PERFORMING ORGANIZATION NAME AND ADDRESS ’IPROGRAM

Kundenfokus: Startpunkt für die digitale Transformation bei Stadtwerken

NASA Astrophysics Data System (ADS)

Fett, Perry; Küller, Philipp

Big Data, Internet der Dinge, Mobile Computing und soziale Medien - die modernen Informationstechnologien durchdringen den Alltag der meisten Menschen und lösen hierdurch eine digitale Transformation aus. Im Unternehmenskontext manifestiert sich die Digitalisierung durch eine neue Qualität der wissensbasierten Entscheidungsunterstützung und der Automatisierung bzw. Autonomisierung der Geschäftsprozesse. Für Stadtwerke gilt es nun, die Chancen der Digitalisierung zu ihren Gunsten zu nutzen. Ein Startpunkt könnte hierbei sein, wie Stadtwerke zukünftig mit ihren Kunden interagieren. Ausgelöst durch die Liberalisierung der Märkte rückt der Kunde heute stärker in den Mittelpunkt - die Energiewirtschaft steht nun vor der Herausforderung, dem Wettbewerb einen Schritt voraus zu sein und dem Kunden ein absolut positives Kundenerlebnis (Customer Experience) sowohl als Maßnahme zur Kundenbindung als auch zum Kundenaufbau zu bieten. Das vorliegende Kapitel zeigt hierfür die Erfolgskriterien für die gelungene Etablierung des Kundenfokus im eigenen Unternehmen auf. Mit dem Customer-Focus-Cycle-Modell von Fujitsu, angelehnt an den Deming-Kreislauf, wird ein allgemeingültiger Ansatz für ein mögliches Vorgehen beim Aufbau des Kundenfokus vorgestellt. Die sechs Phasen werden dabei anhand praktischer Beispiele erläutert und geben zudem Hinweise zu Methoden und Tools. Aus dem vorgestellten "Werkzeugkasten" wird ferner die Customer-Journey-Methode im Detail erläutert. Weiter soll das präsentierte Reifegradmodell Unternehmen dabei unterstützen, den eigenen Status quo festzustellen und die persönlichen Ziele auf dem Weg zur kundenzentrierten Organisation festzulegen.

Extended hepatectomy using the bipolar tissue sealer: an experimental model of small-for-size syndrome in pigs.

PubMed

Athanasiou, Antonios; Kontos, Michael; Pikoulis, Emmanouil; Griniatsos, John; Papalois, Apostolos; Spartalis, Eleftherios; Moris, Demetrios; Felekouras, Evangelos; Liakakos, Theodoros

2016-01-01

After liver transplantation with a small-for-size liver graft or after extensive hepatectomy for liver malignancies or other non malignant conditions with an insufficient liver volume, the survival of patients depends on liver regeneration. This study was carried out in order to create a new porcine model for the study of small-for-size syndrome (SFSS) after extensive hepatectomy. In the present study we used 23 domestic Landrace pigs weighing 28.3±3 kg and aged 19-21 weeks. We describe our detailed surgical procedure for 75% partial hepatectomy a in porcine model, using the saline-coupled bipolar sealing device (Aquamantys®) for hepatectomy. The Aquamantis 2.3 bipolar sealer was connected to the Aquamantis generator and was adjusted to produce 150 watts at a medium flow rate of 20 ml/min. The device temperature was programmed to remain at approximately 100° C and, as a consequence, it produced a tissue ablation without charring. The mean operating time was 153.8 min and the mean blood loss 81.9 ml. The estimated residual liver weight (ERL) was 177 g, whereas the mean proportion of ERL was 24.5%. There was no perioperative mortality. A large animal model, such as pig, is extremely useful in order to reproduce and understand the SFSS. Our simple technique for successful resection of 75% of the liver in pigs, using the Aquamantys system, achieves effective and safe liver parenchymal transection with significant decrease of intraoperative blood loss and can provide useful information for researchers.

A fast iterative recursive least squares algorithm for Wiener model identification of highly nonlinear systems.

PubMed

Kazemi, Mahdi; Arefi, Mohammad Mehdi

2017-03-01

In this paper, an online identification algorithm is presented for nonlinear systems in the presence of output colored noise. The proposed method is based on extended recursive least squares (ERLS) algorithm, where the identified system is in polynomial Wiener form. To this end, an unknown intermediate signal is estimated by using an inner iterative algorithm. The iterative recursive algorithm adaptively modifies the vector of parameters of the presented Wiener model when the system parameters vary. In addition, to increase the robustness of the proposed method against variations, a robust RLS algorithm is applied to the model. Simulation results are provided to show the effectiveness of the proposed approach. Results confirm that the proposed method has fast convergence rate with robust characteristics, which increases the efficiency of the proposed model and identification approach. For instance, the FIT criterion will be achieved 92% in CSTR process where about 400 data is used. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Entrance and Exit CSR Impedance for Non-Ultrarelativistic Beam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Rui; Tsai, Cheng Ying

2017-05-01

For a high-brightness electron beam being transported through beamlines involving bending systems, the coherent synchrotron radiation (CSR) and longitudinal space charge (LSC) interaction could often cause microbunching instability. The semi-analytical Vlasov solver for microbunching gain* depends on the impedances for the relevant collective effects. The existing results for CSR impedances are usually obtained for the ultrarelativistic limit. To extend the microbunching analysis to cases of low energies, such as the case of an ERL merger, or to density modulations at extremely small wavelength, it is necessary to extend the impedance analysis to the non-ultrarelativistic regime. In this study, we presentmore » the impedance analysis for the transient CSR interaction in the non-ultrarelativistic regime, for transients including both entrance to and exit from a magnetic dipole. These impedance results will be compared to their ultra-relativistic counterparts**, and the corresponding wakefield obtained from the impedance for low-energy beams will be compared with the existing results of transient CSR wakefield for general beam energies***.« less

Beam-beam interaction study of medium energy eRHIC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hao,Y.; Litvinenko, V. N.; Ptitsyn, V.

Medium Energy eRHIC (MeRHIC), the first stage design of eRHIC, includes a multi-pass ERL that provides 4GeV high quality electron beam to collide with the ion beam of RHIC. It delivers a minimum luminosity of 10{sup 32} cm{sup -2}s{sup -1}. Beam-beam effects present one of major factors limiting the luminosity of colliders. In this paper, both beam-beam effects on the electron beam and the proton beam in MeRHIC are investigated. The beam-beam interaction can induce a head-tail type instability of the proton beam referred to as the kink instability. Thus, beam stability conditions should be established to avoid proton beammore » loss. Also, the electron beam transverse disruption by collisions has to be evaluated to ensure that the beam quality is good enough for the energy recovery pass. The relation of proton beam stability, electron disruption and consequential luminosity are carried out after thorough discussion.« less

Report of the eRHIC Ring-Ring Working Group

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aschenauer, E. C.; Berg, S.; Blaskiewicz, M.

2015-10-13

This report evaluates the ring-ring option for eRHIC as a lower risk alternative to the linac-ring option. The reduced risk goes along with a reduced initial luminosity performance. However, a luminosity upgrade path is kept open. This upgrade path consists of two branches, with the ultimate upgrade being either a ring-ring or a linac-ring scheme. The linac-ring upgrade could be almost identical to the proposed linac-ring scheme, which is based on an ERL in the RHIC tunnel. This linac-ring version has been studied in great detail over the past ten years, and its significant risks are known. On the othermore » hand, no detailed work on an ultimate performance ring-ring scenario has been performed yet, other than the development of a consistent parameter set. Pursuing the ring-ring upgrade path introduces high risks and requires significant design work that is beyond the scope of this report.« less

Visualisierung analoger Schaltungen durch 3-D Animation von transienten SPICE-Simulationen

NASA Astrophysics Data System (ADS)

Becker, J.; Manoli, Y.

2007-06-01

Für das Zeichnen analoger Schaltpläne wird oft versucht, die Potentialverteilung in der entsprechenden Schaltung auszunutzen, um eine Platzierung der Bauteile nach abfallendem Potential vorzunehmen. Mit Hilfe von Computerunterstützung gelingt es, eine verallgemeinerte dreidimensionale Platzierungsstrategie anzuwenden, die allein auf Grund der Potentialwerte einer Schaltung die automatische Generierung einer technisch exakten Potentialdarstellung erlaubt. Somit ist es möglich, die Ergebnisse von transienten SPICE-Simulationen in jedem Zeitschritt darzustellen und eine Animation des zeitlichen Verhaltens zu erzeugen. Die Umsetzung dieser Methode zur Einbettung in eine webbasierte Lern - und Arbeitsplattform wird im Folgenden erläutert.

Quantifying how the full local distribution of daily precipitation is changing and its uncertainties

NASA Astrophysics Data System (ADS)

Stainforth, David; Chapman, Sandra; Watkins, Nicholas

2016-04-01

The study of the consequences of global warming would benefit from quantification of geographical patterns of change at specific thresholds or quantiles, and better understandings of the intrinsic uncertainties in such quantities. For precipitation a range of indices have been developed which focus on high percentiles (e.g. rainfall falling on days above the 99th percentile) and on absolute extremes (e.g. maximum annual one day precipitation) but scientific assessments are best undertaken in the context of changes in the whole climatic distribution. Furthermore, the relevant thresholds for climate-vulnerable policy decisions, adaptation planning and impact assessments, vary according to the specific sector and location of interest. We present a methodology which maintains the flexibility to provide information at different thresholds for different downstream users, both scientists and decision makers. We develop a method[1,2] for analysing local climatic timeseries to assess which quantiles of the local climatic distribution show the greatest and most robust changes in daily precipitation data. We extract from the data quantities that characterize the changes in time of the likelihood of daily precipitation above a threshold and of the amount of precipitation on those days. Our method is a simple mathematical deconstruction of how the difference between two observations from two different time periods can be assigned to the combination of natural statistical variability and/or the consequences of secular climate change. This deconstruction facilitates an assessment of how fast different quantiles of precipitation distributions are changing. This involves not only determining which quantiles and geographical locations show the greatest and smallest changes, but also those at which uncertainty undermines the ability to make confident statements about any change there may be. We demonstrate this approach using E-OBS gridded data[3] which are timeseries of local daily precipitation across Europe over the last 60+ years. We treat geographical location and precipitation as independent variables and thus obtain as outputs the geographical pattern of change at given thresholds of precipitation. This information is model- independent, thus providing data of direct value in model calibration and assessment. [1] S C Chapman, D A Stainforth, N W Watkins, 2013, On Estimating Local Long Term Climate Trends, Phil. Trans. R. Soc. A, 371 20120287; D. A. Stainforth, 2013 [2] S C Chapman, D A Stainforth, N W Watkins, 2015 Limits to the quantification of local climate change, ERL,10, 094018 (2015), ERL,10, 094018 [3] M R Haylock et al . 2008: A European daily high-resolution gridded dataset of surface temperature and precipitation. J. Geophys. Res (Atmospheres), 113, D20119

EDITORIAL: 'Best article' prize for the 5th anniversary of Environmental Research Letters 'Best article' prize for the 5th anniversary of Environmental Research Letters

NASA Astrophysics Data System (ADS)

Kammen, Dan; Wright, Guillaume

2011-12-01

To celebrate the 5th anniversary of Environmental Research Letters (ERL) the publishers of the journal, IOP Publishing, have awarded a prize for the five best articles published in ERL since the journal began in 2006. The procedure for deciding the winning articles was as thorough as possible to ensure that the most outstanding articles would win the prize. A shortlist of 25 nominated research articles, five for each year since ERL was launched, which were chosen based on a range of criteria including novelty, scientific impact, readership, broad appeal and wider media coverage, was selected. The ERL Editorial Board then assessed and rated these 25 articles in order to choose a winning article for each year. We would like to announce that the following articles have been awarded ERL's 5th anniversary best article prize: 2006/7 The Bodélé depression: a single spot in the Sahara that provides most of the mineral dust to the Amazon forest Ilan Koren, Yoram J Kaufman, Richard Washington, Martin C Todd, Yinon Rudich, J Vanderlei Martins and Daniel Rosenfeld 2006 Environ. Res. Lett. 1 014005 2008 Causes and impacts of the 2005 Amazon drought Ning Zeng, Jin-Ho Yoon, Jose A Marengo, Ajit Subramaniam, Carlos A Nobre, Annarita Mariotti and J David Neelin 2008 Environ. Res. Lett. 3 014002 2009 How difficult is it to recover from dangerous levels of global warming? J A Lowe, C Huntingford, S C B Raper, C D Jones, S K Liddicoat and L K Gohar 2009 Environ. Res. Lett. 4 014012 2010 Is physical water scarcity a new phenomenon? Global assessment of water shortage over the last two millennia Matti Kummu, Philip J Ward, Hans de Moel and Olli Varis 2010 Environ. Res. Lett. 5 034006 2011 Implications of urban structure on carbon consumption in metropolitan areas Jukka Heinonen and Seppo Junnila 2011 Environ. Res. Lett. 6 014018 Our congratulations go to these authors. In recognition of their outstanding work, we are delighted to offer all of the authors of the winning articles free publication in the journal until the end of 2012. Of course all of the shortlisted papers were of great merit, and the full list of nominees can be found below (in alphabetical order). Nominees Achard F, DeFries R, Eva H, Hansen M, Mayaux P and Stibig H-J 2007 Environ. Res. Lett. 2 045022 Baccini A, Laporte N, Goetz S J, Sun M and Dong H 2008 Environ. Res. Lett. 3 045011 Barona E, Ramankutty N, Hyman G and Coomes O T 2010 Environ. Res. Lett. 5 024002 Charpentier A D, Bergerson J A and MacLean H L 2009 Environ. Res. Lett. 4 014005 Chester M V and Horvath A 2009 Environ. Res. Lett. 4 024008 Cooley S R and Doney S C 2009 Environ. Res. Lett. 4 024007 Diffenbaugh N S, White M A, Jones G V and Ashfaq M 2011 Environ. Res. Lett. 6 024024 Farrell A E and Brandt A R 2006 Environ. Res. Lett. 1 014004 Graham W M, Condon R H, Carmichael R H, D'Ambra I, Patterson H K, Linn L J and Hernandez F J Jr 2010 Environ. Res. Lett. 5 045301 Hansen J E 2007 Environ. Res. Lett. 2 024002 Heinonen J and Junnila S 2011 Environ. Res. Lett. 6 014018 Jackson R B et al 2008 Environ. Res. Lett. 3 044006 Jiang M, Michael Griffin W, Hendrickson C, Jaramillo P, VanBriesen J and Venkatesh A 2011 Environ. Res. Lett. 6 034014 Koren I, Kaufman Y J, Washington R, Todd M C, Rudich Y, Martins J V and Rosenfeld D 2006 Environ. Res. Lett. 1 014005 Kummu M, Ward P J, de Moel H and Varis O 2010 Environ. Res. Lett. 5 034006 Lau W K M, Kim M-K, Kim K-M and Lee W-S 2010 Environ. Res. Lett. 5 025204 Lindeboom H J et al 2011 Environ. Res. Lett. 6 035101 Lowe J A, Huntingford C, Raper S C B, Jones C D, Liddicoat S K and Gohar L K 2009 Environ. Res. Lett. 4 014012 Möhler O, Benz S, Saathoff H, Schnaiter M, Wagner R, Schneider J, Walter S, Ebert V and Wagner S 2008 Environ. Res. Lett. 3 025007 Menon S, Akbari H, Mahanama S, Sednev I and Levinson R 2010 Environ. Res. Lett. 5 014005 Schneider A, Friedl M A and Potere D 2009 Environ. Res. Lett. 4 044003 Sloan T and Wolfendale A W 2008 Environ. Res. Lett. 3 024001 Tedesco M, Fettweis X, van den Broeke M R, van de Wal R S W, Smeets C J P P, van de Berg W J, Serreze M C and Box J E 2011 Environ. Res. Lett. 6 014005 Wang M, Wu M and Huo H 2007 Environ. Res. Lett. 2 024001 Zeng N, Yoon J H, Marengo J A, Subramaniam A, Nobre C A, Mariotti A and Neelin J D 2008 Environ. Res. Lett. 3 014002

APS Science 2006.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gibson, J. M.; Fenner, R. B.; Long, G.

2007-05-24

In my five years as the Director of the Advanced Photon Source (APS), I have been fortunate to see major growth in the scientific impact from the APS. This year I am particularly enthusiastic about prospects for our longer-term future. Every scientific instrument must remain at the cutting edge to flourish. Our plans for the next generation of APS--an APS upgrade--got seriously in gear this year with strong encouragement from our users and sponsors. The most promising avenue that has emerged is the energy-recovery linac (ERL) (see article on page xx), for which we are beginning serious R&D. The ERL{at}APSmore » would offer revolutionary performance, especially for x-ray imaging and ultrafast science, while not seriously disrupting the existing user base. I am very proud of our accelerator physics and engineering staff, who not only keep the current APS at the forefront, but were able to greatly impress our international Machine Advisory Committee with the quality of their work on the possible upgrade option (see page xx). As we prepare for long-term major upgrades, our plans to develop and optimize all the sectors at APS in the near future are advancing. Several new beamlines saw first light this year, including a dedicated powder diffraction beamline (11-BM), two instruments for inelastic x-ray scattering at sector 30, and the Center for Nanoscale Materials (CNM) Nanoprobe beamline at sector 26. Our partnership in the first x-ray free-electron laser (LCLS) to be built at Stanford contributes to revolutionary growth in ultrafast science (see page xx), and we are developing a pulse chirping scheme to get ps pulses at sector 7 of the APS within a year or so. In this report, you will find selected highlights of scientific research at the APS from calendar year 2006. The highlighted work covers diverse disciplines, from fundamental to applied science. In the article on page xx you can see the direct impact of APS research on technology. Several new products have emerged from work at the APS, to complement the tremendous output of work in basic science, which often has payoff in technology but over decades rather than years. Highlights in this report also reflect the relevance of APS work to Department of Energy missions, for example a route to more efficient fuel cells (page xx mr-88-073113) addresses the energy challenge, and natural approaches to cleaning up the environment.« less

Beam dynamics validation of the Halbach Technology FFAG Cell for Cornell-BNL Energy Recovery Linac

NASA Astrophysics Data System (ADS)

Méot, F.; Tsoupas, N.; Brooks, S.; Trbojevic, D.

2018-07-01

The Cornell-BNL Electron Test Accelerator (CBETA), a 150 MeV energy recovery linac (ERL) now in construction at Cornell, employs a fixed-field alternating gradient optics return loop: a single beam line comprised of FFAG cells, which accepts four recirculated energies. CBETA FFAG cell uses Halbach permanent magnet technology, its design studies have covered an extended period of time supported by extensive particle dynamics simulations using computed 3-D field map models. This approach is discussed, and illustrated here, based on the final stage in these beam dynamics studies, namely the validation of a ultimate, optimized design of the Halbach cell.

Digitalisierung und Energie 4.0 - Wie schaffen wir die digitale Energiewende?

NASA Astrophysics Data System (ADS)

Irlbeck, Maximilian

Die digitale Energiewende verändert nachhaltig die Systeme der "alten" Energiewelt. Ein Zusammenwachsen verschiedener Domänen im Energiesystem, die durch digitale Technologie möglich wird, birgt enorme Herausforderungen, ist aber notwendig, um die Energiewende und ihre Ziele zu meistern. Dieser Beitrag beschreibt die Wirkung der Digitalisierung auf das Energiesystem, listet Charakteristika der digitalen Energiewende auf und schildert für verschiedene Domänen mögliche Zielvorstellungen, die durch digitale Technologie umsetzbar sind. Am Ende erläutert der Beitrag Handlungsschritte, die auf dem Weg zu einem erneuerbaren Energiesystem gegangen werden sollten und zeigt Probleme und Risiken einer Fehlentwicklung auf.

For Brighter Electron Sources: A Cryogenically Cooled Photocathode and DC Photogun

NASA Astrophysics Data System (ADS)

Lee, Hyeri

Electron beams produced by photoinjectors have a wide range of applications including colliders for high energy and nuclear physics experiments, Free Electron Lasers (FEL), Energy Recovery Linacs (ERL), and Ultrafast Electron Diffraction (UED) with a variety of uses. These applications have been made possible by recent advancement in photocathode and photoinjector research. The key factor is building a compact high-brightness electron source with high voltage and electric field at the photocathode to maximize the electron emission and minimize emittance growth due to space-charge effect. Achieving high brightness from a compact source is a challenging task because it involves an often-conflicting interplay between various requirements imposed by photoemission, acceleration, and beam dynamics. This thesis presents three important results; (i) cryogenically cooled photocathode. From 300K to 90 K, the MTE reduction has been measured from 38 +/- meV to 22 +/- 1meV. (ii) transmission photocathode. MTEs generated from the photocathode operated in transmission mode is smaller by 20% in comparison with the reflection mode operation, which is accompanied by a corresponding QE decrease of about a factor of 2. (iii) a new design of a DC photoemission gun and beamline constructed at Cornell University, along with demonstration of a cryogenically cooled photocathode and transmission photocathode. This photoemission gun can operate at 200kV at both room temperature (RT) and cryogenic temperature (low T) with a corresponding electric field of 10MV/m.

Anthropogenic waste indicators (AWIs), particularly PAHs and LABs, in Malaysian sediments: Application of aquatic environment for identifying anthropogenic pollution.

PubMed

Masood, Najat; Zakaria, Mohamad Pauzi; Halimoon, Normala; Aris, Ahmad Zaharin; Magam, Sami M; Kannan, Narayanan; Mustafa, Shuhaimi; Ali, Masni Mohd; Keshavarzifard, Mehrzad; Vaezzadeh, Vahab; Alkhadher, Sadeq Abdullah Abdo; Al-Odaini, Najat Ahmed

2016-01-15

Polycyclic aromatic hydrocarbons (PAHs) and linear alkylbenzenes (LABs) were used as anthropogenic markers of organic chemical pollution of sediments in the Selangor River, Peninsular Malaysia. This study was conducted on sediment samples from the beginning of the estuary to the upstream river during dry and rainy seasons. The concentrations of ƩPAHs and ƩLABs ranged from 203 to 964 and from 23 to 113 ng g(-1) dry weight (dw), respectively. In particular, the Selangor River was found to have higher sedimentary levels of PAHs and LABs during the wet season than in the dry season, which was primarily associated with the intensity of domestic wastewater discharge and high amounts of urban runoff washing the pollutants from the surrounding area. The concentrations of the toxic contaminants were determined according to the Sediment Quality Guidelines (SQGs). The PAH levels in the Selangor River did not exceed the SQGs, for example, the effects range low (ERL) value, indicating that they cannot exert adverse biological effects. Copyright © 2015 Elsevier Ltd. All rights reserved.

Composite materials for precision space reflector panels

NASA Technical Reports Server (NTRS)

Tompkins, Stephen S.; Funk, Joan G.; Bowles, David E.; Towell, Timothy W.; Connell, John W.

1992-01-01

One of the critical technology needs of large precision reflectors for future astrophysical and optical communications satellites lies in the area of structural materials. Results from a materials research and development program at NASA Langley Research Center to provide materials for these reflector applications are discussed. Advanced materials that meet the reflector panel requirements are identified, and thermal, mechanical and durability properties of candidate materials after exposure to simulated space environments are compared. A parabolic, graphite-phenolic honeycomb composite panel having a surface accuracy of 70.8 microinches rms and an areal weight of 1.17 lbm/sq ft was fabricated with T50/ERL1962 facesheets, a PAEI thermoplastic surface film, and Al and SiO(x) coatings.

Beam dynamics validation of the Halbach Technology FFAG Cell for Cornell-BNL Energy Recovery Linac

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meot, Francois; Tsoupas, N.; Brooks, S.

The Cornell-BNL Electron Test Accelerator (CBETA), a 150 MeV energy recovery linac (ERL) now in construction at Cornell, employs a fixed-field alternating gradient optics return loop: a single beam line comprised of FFAG cells, which accepts four recirculated energies. CBETA FFAG cell uses Halbach permanent magnet technology, its design studies have covered an extended period of time supported by extensive particle dynamics simulations using computed 3-D field map models. As a result, this approach is discussed, and illustrated here, based on the final stage in these beam dynamics studies, namely the validation of a ultimate, optimized design of the Halbachmore » cell.« less

Beam dynamics validation of the Halbach Technology FFAG Cell for Cornell-BNL Energy Recovery Linac

DOE PAGES

Meot, Francois; Tsoupas, N.; Brooks, S.; ...

2018-04-16

The Cornell-BNL Electron Test Accelerator (CBETA), a 150 MeV energy recovery linac (ERL) now in construction at Cornell, employs a fixed-field alternating gradient optics return loop: a single beam line comprised of FFAG cells, which accepts four recirculated energies. CBETA FFAG cell uses Halbach permanent magnet technology, its design studies have covered an extended period of time supported by extensive particle dynamics simulations using computed 3-D field map models. As a result, this approach is discussed, and illustrated here, based on the final stage in these beam dynamics studies, namely the validation of a ultimate, optimized design of the Halbachmore » cell.« less

Simulations of inertial confinement fusion driven by a novel synchrotron-radiation-based x-ray igniter

NASA Astrophysics Data System (ADS)

Shlyaptsev, Vyacheslav N.; Tatchyn, Roman O.

2004-01-01

The advantages and challenges of using a powerful x-ray source for the fast ignition of compressed Inertial Confinement Fusion (ICF) targets have been considered. The requirements for such a source together with the optics to focus the x-rays onto compressed DT cores lead to a conceptual design based on Energy Recovery Linacs (ERLs) and long wigglers to produce x-ray pulses with the appropriate phase space properties. A comparative assessment of the parameters of the igniter system indicates that the technologies for building it, although expensive, are physically achievable. Our x-ray fast ignition (XFI) scheme requires substantially smaller energy for the initiation of nuclear fusion reactions than other methods.

Source apportionment of heavy metals and their ecological risk in a tropical river basin system.

PubMed

Kumar, Balwant; Singh, Umesh Kumar

2018-06-27

Surface water and sediment samples were collected from Ajay River basin to appraise the behavior of heavy metals with surrounding environments and their inter-elemental relationships. Parameters like pH and organic carbon are having a minimal role in heavy metal distribution while some elements like Fe and Cu showed great affinity for organic matter based on linear regression analysis (LRA). Ficklin diagram justified that river basin is not contaminated through acidic pollutants. The river basin is highly enriched with Cu, Cd, Pb, and Ni which were much higher than world average values, average shale standard, effect range low (ERL), and threshold effect level (TEL). PCA and LRA verified that Cu, Cd, Pb, and Ni were mainly derived from anthropogenic inputs, and others like Fe, Mn, Zn, and Co came from geogenic sources. Pollution indices revealed that river basin is moderately to highly contaminated by Cu, Cd, and Ni. Furthermore, Ajay River basin is under strong potential ecological risk based on the obtained value of risk index and probable effect level/effect range median quotient index. However, river basin is strongly influenced by lithological properties, diversified hydrogeological settings, mineralization and mobilization of subsurface materials, and urban and industrial effluents which are controlling the heavy metals.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wendt, P.H.; Van Dolah, R.F.; Bobo, M.Y.

Recent evidence indicates that the wood preservative commonly used in dock pilings (chromated copper arsenate or CCA) is highly toxic to several estuarine organisms in laboratory experiments. Increasing demand for residential docks prompted a field study intended to complement these earlier laboratory investigations. Objectives of the study were to: (1) examine concentrations of Cu, Cr, and As in sediments and oysters from intertidal locations in several creeks with and without high densities of docks; (2) examine the bioaccumulation of wood preservative leachates by laboratory-reared oysters transferred to field sites near and distant from newly constructed docks; and (3) investigate themore » acute toxicity of wood preservative leachates for several species of estuarine fishes and invertebrates exposed to these compounds in the field. Preliminary results indicate that sediment concentrations of all three metals were well below ER-L levels reported by Long and Morgan at all but one dock site. In an ancillary study, 24h LC{sub 50} bioassays were performed using rotifers (Brachionus plicatilis) which were exposed to pore water from sediments in creeks with and without docks. Toxicities of bulk sediments from the same sites were examined using Microtox which measures decreases in bioluminescence of marine bacteria (Photobacterium phosphoreum) as a function of sediment concentration. Neither the rotifer nor the Microtox bioassays showed any significant differences in toxicity between creeks with and without docks.« less

Carbon-coated CoFe–CoFe2O4 composite particles with high and dual-band electromagnetic wave absorbing properties

NASA Astrophysics Data System (ADS)

Guan, Zhen-Jie; Jiang, Jian-Tang; Chen, Na; Gong, Yuan-Xun; Zhen, Liang

2018-07-01

SiO2 and TiO2, as conventional dielectric shells of ferromagnetic/dielectric composite particles, can protect ferromagnetic particles from aggregation and oxidation, but contribute little to electromagnetic loss. In this work, we designed nano-assembled CoFe–CoFe2O4@C composite particles, in which ferrites with high permeability were dielectric elements and carbon was introduced as protective layers, aiming for high-efficiency microwave absorption. These assembled particles with different CoFe contents were prepared through solvothermal methods and subsequent hydrogen-thermal reduction. CoFe nanoparticles were dispersed on a CoFe2O4 matrix via an in situ reduction transformation from CoFe2O4 to CoFe. The microstructure evolution of composite particles and corresponding electromagnetic properties tailoring were investigated. The content and size of CoFe as well as the porosity of composite particles increase gradually as the annealing temperature increases. A maximum reflection loss (RL max) of –71.73 dB is observed at 4.78 GHz in 3.4 mm thick coating using particles annealed at 500 °C as fillers. The coating presents double-band absorbing characteristics, as broad effective absorption bandwidth with RL > 5 (ERL 5) and high RL max are observed in both S-C and X-Ku bands. The tunability as well as the assembled characteristic of the electromagnetic property that endued from the composite structure contributes to the excellent electromagnetic wave absorbing performances.

Combined Effect of Levels in Personal Self-Regulation and Regulatory Teaching on Meta-Cognitive, on Meta-Motivational, and on Academic Achievement Variables in Undergraduate Students.

PubMed

de la Fuente, Jesús; Sander, Paul; Martínez-Vicente, José M; Vera, Mariano; Garzón, Angélica; Fadda, Salvattore

2017-01-01

The Theory of Self- vs . Externally-Regulated Learning™ (SRL vs. ERL) proposed different types of relationships among levels of variables in Personal Self-Regulation (PSR) and Regulatory Teaching (RT) to predict the meta-cognitive, meta-motivational and -emotional variables of learning, and of Academic Achievement in Higher Education. The aim of this investigation was empirical in order to validate the model of the combined effect of low-medium-high levels in PSR and RT on the dependent variables. For the analysis of combinations, a selected sample of 544 undergraduate students from two Spanish universities was used. Data collection was obtained from validated instruments, in Spanish versions. Using an ex-post-facto design, different Univariate and Multivariate Analyses (3 × 1, 3 × 3, and 4 × 1) were conducted. Results provide evidence for a consistent effect of low-medium-high levels of PSR and of RT, thus giving significant partial confirmation of the proposed rational model. As predicted, (1) the levels of PSR and positively and significantly effected the levels of learning approaches, resilience, engagement, academic confidence, test anxiety, and procedural and attitudinal academic achievement; (2) the most favorable type of interaction was a high level of PSR with a high level RT process. The limitations and implications of these results in the design of effective teaching are analyzed, to improve university teaching-learning processes.

Combined Effect of Levels in Personal Self-Regulation and Regulatory Teaching on Meta-Cognitive, on Meta-Motivational, and on Academic Achievement Variables in Undergraduate Students

PubMed Central

de la Fuente, Jesús; Sander, Paul; Martínez-Vicente, José M.; Vera, Mariano; Garzón, Angélica; Fadda, Salvattore

2017-01-01

The Theory of Self- vs. Externally-Regulated Learning™ (SRL vs. ERL) proposed different types of relationships among levels of variables in Personal Self-Regulation (PSR) and Regulatory Teaching (RT) to predict the meta-cognitive, meta-motivational and -emotional variables of learning, and of Academic Achievement in Higher Education. The aim of this investigation was empirical in order to validate the model of the combined effect of low-medium-high levels in PSR and RT on the dependent variables. For the analysis of combinations, a selected sample of 544 undergraduate students from two Spanish universities was used. Data collection was obtained from validated instruments, in Spanish versions. Using an ex-post-facto design, different Univariate and Multivariate Analyses (3 × 1, 3 × 3, and 4 × 1) were conducted. Results provide evidence for a consistent effect of low-medium-high levels of PSR and of RT, thus giving significant partial confirmation of the proposed rational model. As predicted, (1) the levels of PSR and positively and significantly effected the levels of learning approaches, resilience, engagement, academic confidence, test anxiety, and procedural and attitudinal academic achievement; (2) the most favorable type of interaction was a high level of PSR with a high level RT process. The limitations and implications of these results in the design of effective teaching are analyzed, to improve university teaching-learning processes. PMID:28280473

Carbon-coated CoFe-CoFe2O4 composite particles with high and dual-band electromagnetic wave absorbing properties.

PubMed

Guan, Zhen-Jie; Jiang, Jian-Tang; Chen, Na; Gong, Yuan-Xun; Zhen, Liang

2018-07-27

SiO 2 and TiO 2 , as conventional dielectric shells of ferromagnetic/dielectric composite particles, can protect ferromagnetic particles from aggregation and oxidation, but contribute little to electromagnetic loss. In this work, we designed nano-assembled CoFe-CoFe 2 O 4 @C composite particles, in which ferrites with high permeability were dielectric elements and carbon was introduced as protective layers, aiming for high-efficiency microwave absorption. These assembled particles with different CoFe contents were prepared through solvothermal methods and subsequent hydrogen-thermal reduction. CoFe nanoparticles were dispersed on a CoFe 2 O 4 matrix via an in situ reduction transformation from CoFe 2 O 4 to CoFe. The microstructure evolution of composite particles and corresponding electromagnetic properties tailoring were investigated. The content and size of CoFe as well as the porosity of composite particles increase gradually as the annealing temperature increases. A maximum reflection loss (RL max ) of -71.73 dB is observed at 4.78 GHz in 3.4 mm thick coating using particles annealed at 500 °C as fillers. The coating presents double-band absorbing characteristics, as broad effective absorption bandwidth with RL > 5 (ERL 5 ) and high RL max are observed in both S-C and X-K u bands. The tunability as well as the assembled characteristic of the electromagnetic property that endued from the composite structure contributes to the excellent electromagnetic wave absorbing performances.

FEL system with homogeneous average output

DOEpatents

Douglas, David R.; Legg, Robert; Whitney, R. Roy; Neil, George; Powers, Thomas Joseph

2018-01-16

A method of varying the output of a free electron laser (FEL) on very short time scales to produce a slightly broader, but smooth, time-averaged wavelength spectrum. The method includes injecting into an accelerator a sequence of bunch trains at phase offsets from crest. Accelerating the particles to full energy to result in distinct and independently controlled, by the choice of phase offset, phase-energy correlations or chirps on each bunch train. The earlier trains will be more strongly chirped, the later trains less chirped. For an energy recovered linac (ERL), the beam may be recirculated using a transport system with linear and nonlinear momentum compactions M.sub.56, which are selected to compress all three bunch trains at the FEL with higher order terms managed.

Consumers and Workers Opinions of A Proposed Cash Food System: NAS Alameda

DTIC Science & Technology

1975-08-01

J - A August 1975 UNITED STATES ARMY NATO DEVELOPMENT CENTER NATICK, MASSACHUSETTS 01760 Reproduced by NATIONAL...r0im[,m’mw^m^mw&wk!^mmmm’ ■ »-!MM!PW»»* J ^WM*^-»^«^w ■ •. «»q» x.,* ,»^, 8T’<’i’H|gMBai> J ’~"^ ;%»* -« y-’ i: l^laan-tf^wri »tCUWTY...T»?i«n Data Erl.rad) *"--"’—>-n--^a»<fc~mu. ,~ j **- , . ——^ „ .^MMtmmMMM in« in’ ■■- ■ jpplpw(pwflppr*^"’ ’""’»’"» •••-’

Installation and Commissioning of the Super Conducting RF Linac Cryomodules for the Erlp

NASA Astrophysics Data System (ADS)

Goulden, A. R.; Bate, R.; Buckley, R. K.; Pattalwar, S. M.

2008-03-01

An Energy Recovery Linac Prototype (ERLP) is currently being constructed at Daresbury Laboratory, (UK) to promote the necessary skills in science & technology, particularly in photocathode electron gun and Superconducting RF (SRF), to enable the construction of a fourth generation light source, based on energy recovery linacs-4GLS [1]. The ERLP uses two identical cryomodules, one as a booster Linac used to accelerate the beam to 8.5 MeV, the other as an Energy Recovery Linac (ERL) module with an energy gain of 26.5 MeV. Each module consists of two 9- cell cavities operating at a frequency of 1.3 GHz and a temperature of 2 K. As there is no energy recovery in the booster it requires a peak power of 53 kW; whereas the linac module only requires 8 kW. The RF power is supplied by Inductive Output Tube (IOT) amplifiers. The maximum heat load (or the cooling power) required in the SRF system is 180 W at 2 K and is achieved in two stages: a LN2 pre-cooled Linde TCF50 liquefier produces liquid helium at 4.5 K, followed by a 2 K cold box consisting of a JT valve, recuperator and an external room temperature vacuum pumping system. This presentation reports the experience gained during, installation, commissioning and the initial operation of the cryomodules.

Toxic Metals Enrichment in the Surficial Sediments of a Eutrophic Tropical Estuary (Cochin Backwaters, Southwest Coast of India)

PubMed Central

Martin, G. D.; George, Rejomon; Shaiju, P.; Muraleedharan, K. R.; Nair, S. M.; Chandramohanakumar, N.

2012-01-01

Concentrations and distributions of trace metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in surficial sediments of the Cochin backwaters were studied during both monsoon and pre-monsoon periods. Spatial variations were in accordance with textural charaterstics and organic matter content. A principal component analysis distinguished three zones with different metal accumulation capacity: (i) highest levels in north estuary, (ii) moderate levels in central zone, and (iii) lowest levels in southern part. Trace metal enrichments are mainly due to anthropogenic contribution of industrial, domestic, and agricultural effluents, whose effect is enhanced by settling of metals due to organic flocculation and inorganic precipitation associated with salinity changes. Enrichments factors using Fe as a normalizer showed that metal contamination was the product of anthropogenic activities. An assessment of degree of pollution-categorized sediments as moderately polluted with Cu and Pb, moderately-to-heavily polluted with Zn, and heavily-to-extremely polluted with Cd. Concentrations at many sites largely exceed NOAA ERL (e.g., Cu, Cr, and Pb) or ERM (e.g., Cd, Ni, and Zn). This means that adverse effects for benthic organisms are possible or even highly probable. PMID:22645488

Polycyclic aromatic hydrocarbons (PAHs) and alkylated PAHs in the coastal seawater, surface sediment and oyster from Dalian, Northeast China.

PubMed

Hong, Wen-Jun; Jia, Hongliang; Li, Yi-Fan; Sun, Yeqing; Liu, Xianjie; Wang, Luo

2016-06-01

A total of 46 polycyclic aromatic hydrocarbons (PAHs, 21 parent and 25 alkylated) were determined in seawater, surface sediment and oyster from coastal area of Dalian, North China. The concentration of Σ46PAHs in seawater, sediment, and oyster were 136-621 ng/L, 172-4700 ng/g dry weight (dw) and 60.0-129 ng/g wet weight (ww) in winter, and 65.0-1130 ng/L, 71.1-1090 ng/g dw and 72.8-216 ng/g ww in summer, respectively. High PAH levels were found in industrial area both in winter and summer. Selected PAH levels in sediments were compared with Sediments Quality Guidelines (ERM-ERL, TEL-PEL indexes) for evaluation probable toxic effects on marine organism and the results indicate that surface sediment from all sampling sites have a low to medium ecotoxicological risk. Daily intake of PAHs via oyster as seafood by humans were estimated and the results indicated that oyster intake would not pose a health risk to humans even 30 days after a oil spill accident near by. Water-sediment exchange analysis showed that, both in winter and summer, the fluxes for most high molecular weight PAHs were from seawater to sediment, while for low molecular weight PAHs, an equilibrium was reached between seawater and sediment. Copyright © 2016 Elsevier Inc. All rights reserved.

ELAS - SCIENCE & TECHNOLOGY LABORATORY APPLICATIONS SOFTWARE (SILICON GRAPHICS VERSION)

NASA Technical Reports Server (NTRS)

Walters, D.

1994-01-01

The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

ELAS - SCIENCE & TECHNOLOGY LABORATORY APPLICATIONS SOFTWARE (CONCURRENT VERSION)

NASA Technical Reports Server (NTRS)

Pearson, R. W.

1994-01-01

The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

ELAS - SCIENCE & TECHNOLOGY LABORATORY APPLICATIONS SOFTWARE (SUN VERSION)

NASA Technical Reports Server (NTRS)

Walters, D.

1994-01-01

The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

ELAS - SCIENCE & TECHNOLOGY LABORATORY APPLICATIONS SOFTWARE (MASSCOMP VERSION)

NASA Technical Reports Server (NTRS)

Walters, D.

1994-01-01

The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

ELAS - SCIENCE & TECHNOLOGY LABORATORY APPLICATIONS SOFTWARE (DEC VAX VERSION)

NASA Technical Reports Server (NTRS)

Junkin, B. G.

1994-01-01

The Science and Technology Laboratory Applications Software (ELAS) was originally designed to analyze and process digital imagery data, specifically remotely-sensed scanner data. This capability includes the processing of Landsat multispectral data; aircraft-acquired scanner data; digitized topographic data; and numerous other ancillary data, such as soil types and rainfall information, that can be stored in digitized form. ELAS has the subsequent capability to geographically reference this data to dozens of standard, as well as user created projections. As an integrated image processing system, ELAS offers the user of remotely-sensed data a wide range of capabilities in the areas of land cover analysis and general purpose image analysis. ELAS is designed for flexible use and operation and includes its own FORTRAN operating subsystem and an expandable set of FORTRAN application modules. Because all of ELAS resides in one "logical" FORTRAN program, data inputs and outputs, directives, and module switching are convenient for the user. There are over 230 modules presently available to aid the user in performing a wide range of land cover analyses and manipulation. The file management modules enable the user to allocate, define, access, and specify usage for all types of files (ELAS files, subfiles, external files etc.). Various other modules convert specific types of satellite, aircraft, and vector-polygon data into files that can be used by other ELAS modules. The user also has many module options which aid in displaying image data, such as magnification/reduction of the display; true color display; and several memory functions. Additional modules allow for the building and manipulation of polygonal areas of the image data. Finally, there are modules which allow the user to select and classify the image data. An important feature of the ELAS subsystem is that its structure allows new applications modules to be easily integrated in the future. ELAS has as a standard the flexibility to process data elements exceeding 8 bits in length, including floating point (noninteger) elements and 16 or 32 bit integers. Thus it is able to analyze and process "non-standard" nonimage data. The VAX (ERL-10017) and Concurrent (ERL-10013) versions of ELAS 9.0 are written in FORTRAN and ASSEMBLER for DEC VAX series computers running VMS and Concurrent computers running MTM. The Sun (SSC-00019), Masscomp (SSC-00020), and Silicon Graphics (SSC-00021) versions of ELAS 9.0 are written in FORTRAN 77 and C-LANGUAGE for Sun4 series computers running SunOS, Masscomp computers running UNIX, and Silicon Graphics IRIS computers running IRIX. The Concurrent version requires at least 15 bit addressing and a direct memory access channel. The VAX and Concurrent versions of ELAS both require floating-point hardware, at least 1Mb of RAM, and approximately 70Mb of disk space. Both versions also require a COMTAL display device in order to display images. For the Sun, Masscomp, and Silicon Graphics versions of ELAS, the disk storage required is approximately 115Mb, and a minimum of 8Mb of RAM is required for execution. The Sun version of ELAS requires either the X-Window System Version 11 Revision 4 or Sun OpenWindows Version 2. The Masscomp version requires a GA1000 display device and the associated "gp" library. The Silicon Graphics version requires Silicon Graphics' GL library. ELAS display functions will not work with a monochrome monitor. The standard distribution medium for the VAX version (ERL10017) is a set of two 9-track 1600 BPI magnetic tapes in DEC VAX BACKUP format. This version is also available on a TK50 tape cartridge in DEC VAX BACKUP format. The standard distribution medium for the Concurrent version (ERL-10013) is a set of two 9-track 1600 BPI magnetic tapes in Concurrent BACKUP format. The standard distribution medium for the Sun version (SSC-00019) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Masscomp version, (SSC-00020) is a .25 inch streaming magnetic tape cartridge in UNIX tar format. The standard distribution medium for the Silicon Graphics version (SSC-00021) is a .25 inch streaming magnetic IRIS tape cartridge in UNIX tar format. Version 9.0 was released in 1991. Sun4, SunOS, and Open Windows are trademarks of Sun Microsystems, Inc. MIT X Window System is licensed by Massachusetts Institute of Technology.

Fast ferroelectric phase shifters for energy recovery linacs

DOE PAGES

Kazakov, S. Yu; Shchelkunov, S. V.; Yakovlev, V. P.; ...

2010-11-24

Fast phase shifters are described that use a novel barium strontium titanate ceramic that can rapidly change its dielectric constant as an external bias voltage is changed. These phase shifters promise to reduce by ~10 times the power requirements for the rf source needed to drive an energy recovery linac (ERL). Such phase shifters will be coupled with superconducting radiofrequency cavities so as to tune them to compensate for phase instabilities, whether beam-driven or those caused by microphonics. The most promising design is presented, which was successfully cold tested and demonstrated a switching speed of ~30 ns for 77 deg, correspondingmore » to < 0.5 ns per deg of rf phase. As a result, other crucial issues (losses, phase shift values, etc.) are discussed.« less

Theory of Self- vs. Externally-Regulated LearningTM: Fundamentals, Evidence, and Applicability.

PubMed

de la Fuente-Arias, Jesús

2017-01-01

The Theory of Self- vs. Externally-Regulated Learning TM has integrated the variables of SRL theory, the DEDEPRO model, and the 3P model. This new Theory has proposed: (a) in general, the importance of the cyclical model of individual self-regulation (SR) and of external regulation stemming from the context (ER), as two different and complementary variables, both in combination and in interaction; (b) specifically, in the teaching-learning context, the relevance of different types of combinations between levels of self-regulation (SR) and of external regulation (ER) in the prediction of self-regulated learning (SRL), and of cognitive-emotional achievement. This review analyzes the assumptions, conceptual elements, empirical evidence, benefits and limitations of SRL vs. ERL Theory . Finally, professional fields of application and future lines of research are suggested.

Investigation of an Ultrafast Harmonic Resonant RF Kicker

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Yulu

An Energy Recovery Linac (ERL) based multi-turn electron Circulator Cooler Ring (CCR) is envisaged in the proposed Jefferson Lab Electron Ion Collider (JLEIC) to cool the ion bunches with high energy (55 MeV), high current (1.5 A), high repetition frequency (476.3 MHz), high quality magnetized electron bunches. A critical component in this scheme is a pair of ultrafast kickers for the exchange of electron bunches between the ERL and the CCR. The ultrafast kicker should operate with the rise and fall time in less than 2.1 ns, at the repetition rate of ~10s MHz, and should be able to runmore » continuously during the whole period of cooling. These -and-fall time being combined together, are well beyond the state-of-art of traditional pulsed power supplies and magnet kickers. To solve this technical challenge, an alternative method is to generate this high repetition rate, fast rise-and-fall time short pulse continuous waveform by summing several finite number of (co)sine waves at harmonic frequencies of the kicking repetition frequency, and these harmonic modes can be generated by the Quarter Wave Resonater (QWR) based multifrequency cavities. Assuming the recirculator factor is 10, 10 harmonic modes (from 47.63 MHz to 476.3 MHz) with proper amplitudes and phases, plus a DC offset are combined together, a continuous short pulse waveform with the rise-and-fall time in less than 2.1 ns, repetition rate of 47.63 MHz waveform can be generated. With the compact and matured technology of QWR cavities, the total cost of both hardware development and operation can be reduced to a modest level. Focuse on the technical scheme, three main topics will be discussed in this thesis: the synthetization of the kicking pulse, the design and optimization of the deflecting QWR multi-integer harmonic frequency resonator and the fabrication and bench measurements of a half scale copper prototype. In the kicking pulse synthetization part, we begin with the Fourier Series expansion of an ideal square pulse, and get a Flat-Top waveform which will give a uniform kick over the bunch length of the kicked electron bunches, thus the transverse emittance of these kicked electron bunches can be maintained. By using two identical kickers with the betatron phase advance of 180 degree or its odd multiples, the residual kick voltage wave slopes at the unkicked bunch position will be totally cancelled out. Flat-Top waveform combined with two kicker scheme, the transverse emittance of the cooling electron bunches will be conserved during the whole injection, recirculation, and ejection processes. In the cavity design part, firstly, the cavity geometry is optimized to get high transverse shunt impedance thus less than 100 W of RF losses on the cavity wall can be achieved for all these 10 harmonic modes. To support all these 10 harmonic modes, group of four QWRs are adopted with the mode distribution of 5:3:1:1. In the multi-frequency cavities such as the five-mode-cavity and the three-mode-cavity, tunings are required to achieve the design frequencies for each mode. Slight segments of taper design on the inner conductor help to get the frequencies to be exactly on the odd harmonic modes. Stub tuners equal to the number of resonant modes are inserted to the outer conductor wall to compensate the frequency shifts due manufacturing errors and other perturbations during the operation such as the change of the cavity temperature. Single loop couple is designed for all harmonic modes in each cavity. By adjusting its loop size, position and rotation, it is possible to get the fundamental mode critical coupled and other higher harmonic modes slightly over coupled. A broadband circulator will be considered for absorbing the reflected power. Finally in this part, multipole field components due to the asymmetric cylindrical structure around the beam axis of the cavity as well as the beam-induced higher order mode (HOM) issues will be analyzed and discussed in this thesis. A half-scale copper prototype cavity (resonant frequencies from 95.26 MHz to 857.34 MHz) was fabricated to validate the electromagnetic characteristics. With this half scale prototype, the tuning processes of multiple harmonic frequencies, unloaded quality factor measurements of each mode, and bead-pull measurements are performed. The bench measurement results matched well with the simulation results, which have validated our cavity design and construction methods. Finally, a simple mode combining experiment with five separate signal generators was performed on this prototype cavity and the desired fast rise/fall time (1.2 ns), high repetition rate (95.26 MHz) waveform was captured, which finally proved our design of this ultrafast harmonic kicker.« less

Spatial Evaluation of Heavy Metals Concentrations in the Surface Sediment of Taihu Lake.

PubMed

Niu, Yong; Jiao, Wei; Yu, Hui; Niu, Yuan; Pang, Yong; Xu, Xiangyang; Guo, Xiaochun

2015-11-27

With regard to the size of China's freshwater lakes, Taihu Lake ranks third and it plays an important role in the supply of drinking water, flood prevention, farming and navigation, as well as in the travelling industry. The problem of environmental pollution has attracted widespread attention in recent years. In order to understand the levels, distribution and sources of heavy metals in sediments of Taihu Lake, random selection was carried out to obtain 59 samples of surface sediment from the entire lake and study the concentrations of Pb, Cd, Cu, Zn, Cr and Ni. Toxic units were also calculated to normalize the toxicities caused by various heavy metals. As a result, Cd and Cu in sediment were considered lower than the effect range low (ERL) at all regions where samples were gathered, while Pb and Ni were categorized into ERL-effect range median (ERM) at over 22% of the regions where samples were obtained. Nevertheless, all average concentrations of the samples were below the level of potential effect. According to the findings of this research, significant spatial heterogeneity existed in the above heavy metals. In conclusion, the distribution areas of heavy metals with higher concentrations were mainly the north bays, namely Zhushan Bay, Meiliang Bay as well as Gonghu Bay. The distribution areas of Cu, Zn, Cr and Ni with higher concentration also included the lake's central region, whereas the uniform distribution areas of those with lower concentrations were the lake's southeast region. In addition, it was most probable that the spatial distribution of heavy metals was determined by river inputs, whereas atmospheric precipitation caused by urban and traffic contamination also exerted considerable effects on the higher concentrations of Pb and Cd. Through evaluating the total amount of toxic units (ΣTU), it was found that higher toxicity existed primarily in the north bays and central region of the lake. If the heavy metals were sorted by the reduction of mean heavy metal toxic units in Taihu Lake in descending order, it would be Pb, Cr, Ni, Cd, Zn and Cu. Generally speaking, these result of analyses are conducive to alleviating the contamination of heavy metals in Taihu Lake.

Proc. of the workshop on pushing the limits of RF superconductivity.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, K-J., Eyberger, C., editors

2005-04-13

For three days in late September last year, some sixty experts in RF superconductivity from around the world came together at Argonne to discuss how to push the limits of RF superconductivity for particle accelerators. It was an intense workshop with in-depth presentations and ample discussions. There was added excitement due to the fact that, a few days before the workshop, the International Technology Recommendation Panel had decided in favor of superconducting technology for the International Linear Collider (ILC), the next major high-energy physics accelerator project. Superconducting RF technology is also important for other large accelerator projects that are eithermore » imminent or under active discussion at this time, such as the Rare Isotope Accelerator (RIA) for nuclear physics, energy recovery linacs (ERLs), and x-ray free-electron lasers. For these accelerators, the capability in maximum accelerating gradient and/or the Q value is essential to limit the length and/or operating cost of the accelerators. The technological progress of superconducting accelerators during the past two decades has been truly remarkable, both in low-frequency structures for acceleration of protons and ions as well as in high-frequency structures for electrons. The requirements of future accelerators demand an even higher level of performance. The topics of this workshop are therefore highly relevant and timely. The presentations given at the workshop contained authoritative reviews of the current state of the art as well as some original materials that previously had not been widely circulated. We therefore felt strongly that these materials should be put together in the form of a workshop proceeding. The outcome is this report, which consists of two parts: first, a collection of the scholarly papers prepared by some of the participants and second, copies of the viewgraphs of all presentations. The presentation viewgraphs, in full color, are also available from the Workshop Presentations link on the workshop's web page at http://www.aps.anl.gov/conferences/RFSCLimits/. I would like to thank all of the participants for their lively contributions to the workshop and to these proceedings, and Helen Edwards and Hasan Padamsee for their help in developing the workshop program. I also thank Cathy Eyberger, Kelly Jaje, and Renee Lanham for working very hard to take care of the administrative details, in particular Cathy for editing this report.« less

[The database server for the medical bibliography database at Charles University].

PubMed

Vejvalka, J; Rojíková, V; Ulrych, O; Vorísek, M

1998-01-01

In the medical community, bibliographic databases are widely accepted as a most important source of information both for theoretical and clinical disciplines. To improve access to medical bibliographic databases at Charles University, a database server (ERL by Silver Platter) was set up at the 2nd Faculty of Medicine in Prague. The server, accessible by Internet 24 hours/7 days, hosts now 14 years' MEDLINE and 10 years' EMBASE Paediatrics. Two different strategies are available for connecting to the server: a specialized client program that communicates over the Internet (suitable for professional searching) and a web-based access that requires no specialized software (except the WWW browser) on the client side. The server is now offered to academic community to host further databases, possibly subscribed by consortia whose individual members would not subscribe them by themselves.

Energiewende 4.0 - Chancen, Erfolgsfaktoren, Herausforderungen, Barrieren für Stadtwerke und Verteilnetzbetreiber

NASA Astrophysics Data System (ADS)

Rieger, Volker; Weber, Sven

Energiewende und Digitalisierung transformieren die Energiewirtschaft in noch nicht da gewesenem Maße. Durch den Wandel des linearen, vertikalen Geschäftsmodells in ein horizontales und vernetztes entstehen neue Geschäftsmodelle, in die vermehrt neue Anbieter aus anderen Branchen und Start-ups eintreten. Auf Basis langjähriger Beratungserfahrung erläutern die Autoren die zukünftige Geschäftslogik der Energiewelt 4.0. Anhand von Beispielen aus anderen Branchen zeigen sie dabei wesentliche Handlungsfelder speziell für regionale Energieunternehmen auf. Um in der neuen Energiewelt relevant zu bleiben, müssen Energieversorger ihre Kunden in den Fokus rücken, sich für Partnerschaften öffnen, in die Leistungsfähigkeit ihrer Infrastruktur investieren und v. a. einen Kulturwandel hin zu mehr Agilität und Offenheit vollführen.

Project oriented klystron developments in Japan, China and India

NASA Astrophysics Data System (ADS)

Fukuda, Shigeki

2017-12-01

Modern accelerators are based on the rf technology and the klystron is the one of key components. Some special accelerator projects require their specified klystrons i.e., project-oriented klystrons. In this paper, project-oriented klystron developments for a decade in Japan are described. Related projects are ILC, cERL and SKEKB. Usually klystron is very expensive but has a finite life and needs to procure again. Trial to introduce the compatible tubes and have a competitive tender to reduce the cost is described. At the same time, since an efficiency improvement is one of the recent trend, such an attempt is also presented. International klystron collaboration among the Asian countries has been performed for a long time. In this paper, collaboration with China and India is introduced. Since topics are covered mainly author's experience, related counties described are limited.

Theory of Self- vs. Externally-Regulated LearningTM: Fundamentals, Evidence, and Applicability

PubMed Central

de la Fuente-Arias, Jesús

2017-01-01

The Theory of Self- vs. Externally-Regulated LearningTM has integrated the variables of SRL theory, the DEDEPRO model, and the 3P model. This new Theory has proposed: (a) in general, the importance of the cyclical model of individual self-regulation (SR) and of external regulation stemming from the context (ER), as two different and complementary variables, both in combination and in interaction; (b) specifically, in the teaching-learning context, the relevance of different types of combinations between levels of self-regulation (SR) and of external regulation (ER) in the prediction of self-regulated learning (SRL), and of cognitive-emotional achievement. This review analyzes the assumptions, conceptual elements, empirical evidence, benefits and limitations of SRL vs. ERL Theory. Finally, professional fields of application and future lines of research are suggested. PMID:29033872

Bioremediation of PAHs contaminated river sediment by an integrated approach with sequential injection of co-substrate and electron acceptor: Lab-scale study.

PubMed

Liu, Tongzhou; Zhang, Zhen; Dong, Wenyi; Wu, Xiaojing; Wang, Hongjie

2017-11-01

In this study, the feasibility of employing an integrated bioremediation approach in contaminated river sediment was evaluated. Sequential addition of co-substrate (acetate) and electron acceptor (NO 3 - ) in a two-phase treatment was capable of effectively removing polycyclic aromatic hydrocarbons (PAHs) in river sediment. The residual concentration of total PAHs decreased to far below effect range low (ERL) value within 91 days of incubation, at which concentration it could rarely pose biological impairment. The biodegradation of high molecular weight PAHs were found to be mainly occurred in the sediment treated with co-substrates (i.e. acetate or methanol), in which acetate was found to be more suitable for PAHs degradation. The role of co-substrates in influencing PAHs biodegradation was tentatively discussed herein. Additionally, the sediment odorous problem and blackish appearance were intensively addressed by NO 3 - injection. The results of this study demonstrated that integrating two or more approaches/processes would be a helpful option in sediment remediation. It can lead to a more effective remediation performance, handle multiple contamination issues, as well as mitigate environmental risks caused by one of the single methods. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biokompatible Implantate und Neuentwicklungen in der Gynäkologie

NASA Astrophysics Data System (ADS)

Jacobs, Volker R.; Kiechle, Marion

Für den Einsatz in der Gynäkologie stehen heute eine Vielzahl unterschiedlicher, biokompatibler Materialien und Implantate zur Verfügung. Auf eine Auswahl soll hier näher eingegangen werden, die die verschiedenen Materialien und Bauweisen repräsentieren. So sind Brustimplantate seit fast vier Jahrzehnten im Gebrauch für die Brustvergrösserung und den Brustwiederaufbau. Material, Bauweisen und medizinische Aspekte einschliesslich der kontroversen Diskussion um Silikon werden im folgenden erläutert. Neuere Entwicklungen von Verhütungstechniken für permanente Sterilisation wie den Filshie ClipTM für transabdominalen und den STOPTM für intraluminalen Verschluss der Eileiter oder die intrauterin plazierte Hormonspirale MirenaTM für zeitlich begrenzte Verhütung werden beschrieben. Eine neue Perspektive zur Verhinderung postoperativer intraabdominaler Adhäsionen stellt Spray-GelTM, ein Zweikomponenten Hydrogel aus Polyethylenglykol, dar.

Geochemical and geo-statistical assessment of selected heavy metals in the surface sediments of the Gorgan Bay, Iran.

PubMed

Bastami, Kazem Darvish; Bagheri, Hossein; Haghparast, Sarah; Soltani, Farzaneh; Hamzehpoor, Ali; Bastami, Mousa Darvish

2012-12-01

We investigated heavy metal concentrations of zinc (Zn), copper (Cu), chromium (Cr), and lead (Pb), their spatial distribution and enrichment factor index in surface sediments of the Gorgan Bay. Sediment Quality Guidelines were also applied to assess adverse biological effects of these metals. Heavy metals were determined by inductively coupled plasma-mass spectroscopy (ICP-MS). The results indicated mean concentrations (ppm) of heavy metals were (mean±S.D.) Pb: 11.5±4.88, Cu: 18±8.83, Zn: 42±22.15 and Cr: 32±15.19. Based on Enrichment index, the Gorgan Bay is a low-enriched to non-enriched bay. Heavy metal contents were lower than the standard limits of PEL, ERL, and ERM that reveal no threatening influence of the metals in the Bay. Copyright © 2012 Elsevier Ltd. All rights reserved.

Word Frequency Analysis. MOS: 62J. Skill Levels 1 & 2.

DTIC Science & Technology

1981-05-01

WCRDI COUNT2 W OR u, CO UIT 3 WORD 3 COUNT’. kCRD4 I CELL 9 CLNTER I CERERLINE t CENTRALLY 2 C [JTP I FGAL 2 CZRT..IN I CESSIVE 46 LFI’ 14 C H%1% ~ 4...4 .4* 4 AD ,G4 ANGLI 4 fC S 0A 4 r. 5 54b d204 4 BE- J 4OCK4 ECAGNE 4 TTA .(.KFTS 4 B𔃻E.KER 4 44 CC!’PPCT 4 13FL*.~If 4 CCLC CTwV7CCC~L< EL4 CO 4 CE...t CI RE I CARTcUL I CAR7~ I 3 CARRY I CAL 7I C!! 11 E t C., TFPS I CA~TCH I C4TEO I co usIN Kr I CL TC1 I CELL 1CTNlERL!NEz I ’ENI P.LIY Ic3VEI

WHO recommendations for the viruses used in the 2013-2014 Northern Hemisphere influenza vaccine: Epidemiology, antigenic and genetic characteristics of influenza A(H1N1)pdm09, A(H3N2) and B influenza viruses collected from October 2012 to January 2013.

PubMed

Barr, Ian G; Russell, Colin; Besselaar, Terry G; Cox, Nancy J; Daniels, Rod S; Donis, Ruben; Engelhardt, Othmar G; Grohmann, Gary; Itamura, Shigeyuki; Kelso, Anne; McCauley, John; Odagiri, Takato; Schultz-Cherry, Stacey; Shu, Yuelong; Smith, Derek; Tashiro, Masato; Wang, Dayan; Webby, Richard; Xu, Xiyan; Ye, Zhiping; Zhang, Wenqing

2014-08-20

In February the World Health Organisation (WHO) recommends influenza viruses to be included in influenza vaccines for the forthcoming winter in the Northern Hemisphere. These recommendations are based on data collected by National Influenza Centres (NICs) through the WHO Global Influenza Surveillance and Response System (GISRS) and a more detailed analysis of representative and potential antigenically variant influenza viruses from the WHO Collaborating Centres for Influenza (WHO CCs) and Essential Regulatory Laboratories (ERLs). This article provides a detailed summary of the antigenic and genetic properties of viruses and additional background data used by WHO experts during development of the recommendations of the 2013-2014 Northern Hemisphere influenza vaccine composition. Published by Elsevier Ltd.

Digitalisierung als Inkubator für die Energieversorgung von morgen

NASA Astrophysics Data System (ADS)

Arnold, Christian; Postina, Matthias

Neue Treiber der Digitalisierung bestimmen die Geschicke der etablierten Unternehmen im Energiebereich, dabei haben diese in vielen Fällen noch nicht einmal adäquat auf die altbekannten Treiber der Energiewende reagiert. Eine ganze Branche ist im Umbruch, alte Erlösmodelle brechen ein und Einigkeit scheint bei den Verantwortlichen nur in der Frage zu herrschen, wie in Zukunft noch Geld verdient werden kann. Dieser Beitrag erklärt die prägenden Treiber der Veränderung, analysiert die Ausgangslage und nennt Herausforderungen der Branche. Darüber hinaus legt er den Fokus auf die Betrachtung der neuen digitalen Wertschöpfung. Dazu wird ein Modell eingeführt, welches von der klassischen Wertschöpfungskette über datenbasierte Geschäftsmodelle im Energiesystem bis hin zum Internet of Smart Services reicht. Mit dem Modell geben die Autoren gleichsam Einblick in das geplante Energiewendeprojekt enera.

A basic interpretation of the technical language of radiation processing

NASA Astrophysics Data System (ADS)

Deeley, Catherine M.

2004-09-01

For the food producer contemplating the purchase of radiation processing equipment the task of evaluating the strengths and weaknesses of the available technologies, electron beam (E-beam), X-ray and gamma, to determine the best option for their application, is onerous. Not only is the level of investment daunting but also, to be sure of comparing like with like, the evaluator requires a basic understanding of the science underpinning radiation processing. There have been many papers published that provide technical specialists with a rigorous interpretation of this science (In: Gaughran, E.R.L., Goudie, A.J. (Eds.), Technical Developments and Prospects of Sterilization by Ionizing Radiation, International Conference, Vienna. Multiscience Publications Ltd., pp. 145-172). The objective for this paper is to give non-specialists an introduction to the language of radiation processing and to clarify some of the terminology associated with the use of radioactive sources for this application.

Spatial Evaluation of Heavy Metals Concentrations in the Surface Sediment of Taihu Lake

PubMed Central

Niu, Yong; Jiao, Wei; Yu, Hui; Niu, Yuan; Pang, Yong; Xu, Xiangyang; Guo, Xiaochun

2015-01-01

With regard to the size of China’s freshwater lakes, Taihu Lake ranks third and it plays an important role in the supply of drinking water, flood prevention, farming and navigation, as well as in the travelling industry. The problem of environmental pollution has attracted widespread attention in recent years. In order to understand the levels, distribution and sources of heavy metals in sediments of Taihu Lake, random selection was carried out to obtain 59 samples of surface sediment from the entire lake and study the concentrations of Pb, Cd, Cu, Zn, Cr and Ni. Toxic units were also calculated to normalize the toxicities caused by various heavy metals. As a result, Cd and Cu in sediment were considered lower than the effect range low (ERL) at all regions where samples were gathered, while Pb and Ni were categorized into ERL-effect range median (ERM) at over 22% of the regions where samples were obtained. Nevertheless, all average concentrations of the samples were below the level of potential effect. According to the findings of this research, significant spatial heterogeneity existed in the above heavy metals. In conclusion, the distribution areas of heavy metals with higher concentrations were mainly the north bays, namely Zhushan Bay, Meiliang Bay as well as Gonghu Bay. The distribution areas of Cu, Zn, Cr and Ni with higher concentration also included the lake’s central region, whereas the uniform distribution areas of those with lower concentrations were the lake’s southeast region. In addition, it was most probable that the spatial distribution of heavy metals was determined by river inputs, whereas atmospheric precipitation caused by urban and traffic contamination also exerted considerable effects on the higher concentrations of Pb and Cd. Through evaluating the total amount of toxic units (ΣTU), it was found that higher toxicity existed primarily in the north bays and central region of the lake. If the heavy metals were sorted by the reduction of mean heavy metal toxic units in Taihu Lake in descending order, it would be Pb, Cr, Ni, Cd, Zn and Cu. Generally speaking, these result of analyses are conducive to alleviating the contamination of heavy metals in Taihu Lake. PMID:26633432

Body temperature predicts the direction of internal desynchronization in humans isolated from time cues.

PubMed

Daan, Serge; Honma, Sato; Honma, Ken-ichi

2013-12-01

This publication presents a new analysis of experiments that were carried out in human subjects in isolation from time cues, under supervision of Jürgen Aschoff and Rütger Wever at the Max Planck Institute for Behavioural Physiology (Erling-Andechs, Germany, 1964-1974). Mean rectal temperatures (tb) were compared between subjects who showed internal desynchronization (ID) and internal synchronization (IS) of the endogenous rhythms of sleep-wakefulness and of body temperature. The results showed that tb was reduced in long ID (circadian sleep-wake cycle length [τ(SW)] > 27 h) and increased in short ID (τ(SW) < 22 h) relative to IS. In subjects with both ID and IS sections in the complete record, these differences were also found when comparing only the IS sections: Low tb during IS predicts the later occurrence of long ID, and high tb predicts the incidence of short ID. While this association is associated with sex differences in tb, it also occurs within each sex. To the extent that the variation in tb reflects the variation in heat production (metabolic rate), the results are consistent with the proposition that the spontaneous frequency of the human sleep-wake oscillator is associated with the metabolic rate, as suggested on the basis of the proportionality of meal frequency and sleep-wake frequency. The finding thus has implications for our views on spontaneous sleep timing.

Variability in regional background aerosols within the Mediterranean

NASA Astrophysics Data System (ADS)

Querol, X.; Alastuey, A.; Pey, J.; Cusack, M.; Pérez, N.; Mihalopoulos, N.; Theodosi, C.; Gerasopoulos, E.; Kubilay, N.; Koçak, M.

2009-04-01

The main objective of this study is the identification of major factors controlling levels and chemical composition of aerosols in the regional background (RB) along the Mediterranean Basin (MB). To this end, data on PM levels and speciation from Montseny (MSY, Northeastern Spain), Finokalia (FKL, Southern Greece) and Erdemli (ERL, Southern Turkey) for the period 2001 to 2008 are evaluated. Important differences on PM levels and composition are evident when comparing the Western and Eastern MBs. The results manifest W-E and N-S PM10 and PM2.5 gradients along the MB, attributed to the higher frequency and intensity of African dust outbreaks in the EMB, while for PM1 very similar levels are encountered. PM in the EMB is characterized by higher levels of crustal material and sulphate as compared to WMB (and central European sites), however, RB nitrate and OC+EC levels are relatively constant across the Mediterranean and lower than other European sites. Marked seasonal trends are evidenced for PM levels, nitrate (WMB), ammonium and sulphate. Also relatively higher levels of V and Ni (WMB) are measured in the Mediterranean basin, probably as a consequence of high emissions from fuel-oil combustion (power generation, industrial and shipping emissions). Enhanced sulphate levels in EMB compared to WMB were measured. The high levels of sulphate in the EMB may deplete the available gas-phase NH3 so that little ammonium nitrate can form due to the low NH3 levels. This study illustrates the existence of three very important features within the Mediterranean that need to be accounted for when modeling climate effects of aerosols in the area, namely: (a) the increasing gradient of dust from WMB to EMB; (b) the change of hygroscopic behavior of mineral aerosols (dust) via nitration and sulphation; and (c) the abundance of highly hygroscopic aerosols during high insolation (low cloud formation) periods.

Variability in regional background aerosols within the Mediterranean

NASA Astrophysics Data System (ADS)

Querol, X.; Alastuey, A.; Pey, J.; Cusack, M.; Pérez, N.; Mihalopoulos, N.; Theodosi, C.; Gerasopoulos, E.; Kubilay, N.; Koçak, M.

2009-07-01

The main objective of this study is the identification of major factors controlling levels and chemical composition of aerosols in the regional background (RB) along the Mediterranean Basin (MB). To this end, data on PM levels and speciation from Montseny (MSY, NE Spain), Finokalia (FKL, Southern Greece) and Erdemli (ERL, Southern Turkey) for the period 2001 to 2008 are evaluated. Important differences on PM levels and composition are evident when comparing the Western and Eastern MBs. The results manifest W-E and N-S PM10 and PM2.5 gradients along the MB, attributed to the higher frequency and intensity of African dust outbreaks in the EMB, while for PM1 very similar levels are encountered. PM in the EMB is characterized by higher levels of crustal material and sulphate as compared to WMB (and central European sites), however, RB nitrate and OC + EC levels are relatively constant across the Mediterranean and lower than other European sites. Marked seasonal trends are evidenced for PM levels, nitrate (WMB), ammonium and sulphate. Also relatively higher levels of V and Ni (WMB) are measured in the Mediterranean basin, probably as a consequence of high emissions from fuel-oil combustion (power generation, industrial and shipping emissions). Enhanced sulphate levels in EMB compared to WMB were measured. The high levels of sulphate in the EMB may deplete the available gas-phase NH3 so that little ammonium nitrate can form due to the low NH3 levels. This study illustrates the existence of three very important features within the Mediterranean that need to be accounted for when modeling climate effects of aerosols in the area, namely: a) the increasing gradient of dust from WMB to EMB; b) the change of hygroscopic behavior of mineral aerosols (dust) via nitration and sulfation; and c) the abundance of highly hygroscopic aerosols during high insolation (low cloud formation) periods.

Integration of geospatial multi-mode transportation Systems in Kuala Lumpur

NASA Astrophysics Data System (ADS)

Ismail, M. A.; Said, M. N.

2014-06-01

Public transportation serves people with mobility and accessibility to workplaces, health facilities, community resources, and recreational areas across the country. Development in the application of Geographical Information Systems (GIS) to transportation problems represents one of the most important areas of GIS-technology today. To show the importance of GIS network analysis, this paper highlights the determination of the optimal path between two or more destinations based on multi-mode concepts. The abstract connector is introduced in this research as an approach to integrate urban public transportation in Kuala Lumpur, Malaysia including facilities such as Light Rapid Transit (LRT), Keretapi Tanah Melayu (KTM) Komuter, Express Rail Link (ERL), KL Monorail, road driving as well as pedestrian modes into a single intelligent data model. To assist such analysis, ArcGIS's Network Analyst functions are used whereby the final output includes the total distance, total travelled time, directional maps produced to find the quickest, shortest paths, and closest facilities based on either time or distance impedance for multi-mode route analysis.

Bioavailability of heavy metals in water and sediments from a typical Mediterranean Bay (Málaga Bay, Region of Andalucía, Southern Spain).

PubMed

Alonso Castillo, M L; Sánchez Trujillo, I; Vereda Alonso, E; García de Torres, A; Cano Pavón, J M

2013-11-15

Concentrations of heavy metals were measured in sediment and water from Málaga Bay (South Spain). In the later twentieth century, cities such as Málaga, have suffered the impact of mass summer tourism. The ancient industrial activities, and the actual urbanization and coastal development, recreation and tourism, wastewaters treatment facilities, have been sources of marine pollution. In sediments, Ni was the most disturbing metal because Ni concentrations exceeded the effects range low (ERL), concentration at which toxicity could start to be observed in 85% of the samples analyzed. The metal bioavailability decreased in the order: Cd>Ni>Pb>Cu>Cr. In the sea water samples, Cd and Pb were the most disturbing metals because they exceeded the continuous criteria concentration (CCC) of US EPA in a 22.5% and 10.0% of the samples, respectively. Statistical analyses (ANOVA, PCA, CA) were performed. Copyright © 2013 Elsevier Ltd. All rights reserved.

The extent and historical trend of metal pollution recorded in core sediments from the artificial Lake Shihwa, Korea.

PubMed

Ra, Kongtae; Bang, Jae-Hyun; Lee, Jung-Moo; Kim, Kyung-Tae; Kim, Eun-Soo

2011-08-01

The vertical distribution of trace metals in sediment cores was investigated to evaluate the extent and the historical record of metal pollution over 30 years in the artificial Lake Shihwa in Korea. A marked increase of trace metals after 1980 was observed due to the operation of two large industrial complexes and dike construction for a reclamation project. There was a decreasing trend of metal concentrations with the distance from the pollution source. The enrichment factor and pollution load index of the metals indicated that the metal pollution was mainly derived from Cu, Zn and Cd loads due to anthropogenic activities. The concentrations of Cr, Ni, Cu, Zn, As and Pb in the upper part of all core sediments exceeded the ERL criteria of NOAA. Our results indicate that inadequate planning and management of industrialization and a large reclamation project accomplished by dike construction have continued to strongly accelerate metal pollution in Lake Shihwa. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Traffic sharing algorithms for hybrid mobile networks

NASA Technical Reports Server (NTRS)

Arcand, S.; Murthy, K. M. S.; Hafez, R.

1995-01-01

In a hybrid (terrestrial + satellite) mobile personal communications networks environment, a large size satellite footprint (supercell) overlays on a large number of smaller size, contiguous terrestrial cells. We assume that the users have either a terrestrial only single mode terminal (SMT) or a terrestrial/satellite dual mode terminal (DMT) and the ratio of DMT to the total terminals is defined gamma. It is assumed that the call assignments to and handovers between terrestrial cells and satellite supercells take place in a dynamic fashion when necessary. The objectives of this paper are twofold, (1) to propose and define a class of traffic sharing algorithms to manage terrestrial and satellite network resources efficiently by handling call handovers dynamically, and (2) to analyze and evaluate the algorithms by maximizing the traffic load handling capability (defined in erl/cell) over a wide range of terminal ratios (gamma) given an acceptable range of blocking probabilities. Two of the algorithms (G & S) in the proposed class perform extremely well for a wide range of gamma.

"Das Konkrete ist das Abstrakte, an das man sich schließlich gewöhnt hat." (Laurent Schwartz) Über den Ablauf des mathematischen Verstehens

NASA Astrophysics Data System (ADS)

Lowsky, Martin

Die im Titel genannte Aussage findet sich in den Lebenserinnerungen von Laurent Schwartz (1915-2002), einem der fruchtbarsten Mathematiker, Mitglied der Gruppe Bourbaki. Im Original lautet die Aussage: "un objet concret est un objet abstrait auquel on a fini par s'habituer." Schwartz erläutert sie am Beispiel des Integrals über {e^{-1/2{x^2}}} , das den Wert Wurzel aus 2π hat und in dem sich also die Zahlen e und π verknüpfen. Was Schwartz aber vor allem ausdrücken will, ist dies: Das mathematische Verständnisd geht langsam vor sich und es bedarf der Anstrengung. "Es ist eine Frage der Zeit und der Energie", sagt Schwartz, und gerade dies mache es so schwer, die höhere Mathematik unter das Volk zu bringen. Das Lernen und Lehren von Mathematik laufe eben mühevoll und langsam ab.

More frequent moments in the climate change debate as emissions continue

NASA Astrophysics Data System (ADS)

Huntingford, Chris; Friedlingstein, Pierre

2015-12-01

Recent years have witnessed unprecedented interest in how the burning of fossil fuels may impact on the global climate system. Such visibility of this issue is in part due to the increasing frequency of key international summits to debate emissions levels, including the 2015 21st Conference of Parties meeting in Paris. In this perspective we plot a timeline of significant climate meetings and reports, and against metrics of atmospheric greenhouse gas changes and global temperature. One powerful metric is cumulative CO2 emissions that can be related to past and future warming levels. That quantity is analysed in detail through a set of papers in this ERL focus issue. We suggest it is an open question as to whether our timeline implies a lack of progress in constraining climate change despite multiple recent keynote meetings—or alternatively—that the increasing level of debate is encouragement that solutions will be found to prevent any dangerous warming levels?

New halo formation mechanism at the KEK compact energy recovery linac

NASA Astrophysics Data System (ADS)

Tanaka, Olga; Nakamura, Norio; Shimada, Miho; Miyajima, Tsukasa; Ueda, Akira; Obina, Takashi; Takai, Ryota

2018-02-01

The beam halo mitigation is a very important challenge for reliable and safe operation of a high-energy machine. A systematic beam halo study was conducted at the KEK compact energy recovery linac (cERL) since non-negligible beam loss was observed in the recirculation loop during a common operation. We found that the beam loss can be avoided by making use of the collimation system. Beam halo measurements have demonstrated the presence of vertical beam halos at multiple locations in the beam line (except the region near the electron gun). Based on these observations, we made a conjecture that the transverse beam halo is attributed to the longitudinal bunch tail arising at the photocathode. The transfer of particles from the longitudinal space to a transverse halo may have been observed and studied in other machines, considering nonlinear effects as their causes. However, our study demonstrates a new unique halo formation mechanism, in which a transverse beam halo can be generated by a longitudinal bunch tail due to transverse rf kicks from the accelerating (monopole) fields of the radio-frequency cavities. This halo formation occurs when nonrelativistic particles enter the cavities with a transverse offset, even if neither nonlinear optics nor nonlinear beam effects are present. A careful realignment of the injector system will mitigate the present halo. Another possible cure is to reduce the bunch tails by changing the photocathode material from the present GaAs to a multi-alkali that is known to have a shorter longitudinal tail.

An evaluation of contaminated estuarine sites using sediment quality guidelines and ecological assessment methodologies.

PubMed

Fulton, M; Key, P; Wirth, E; Leight, A K; Daugomah, J; Bearden, D; Sivertsen, S; Scott, G

2006-10-01

Toxic contaminants may enter estuarine ecosystems through a variety of pathways. When sediment contaminant levels become sufficiently high, they may impact resident biota. One approach to predict sediment-associated toxicity in estuarine ecosystems involves the use of sediment quality guidelines (ERMs, ERLs) and site-specific contaminant chemistry while a second approach utilizes site-specific ecological sampling to assess impacts at the population or community level. The goal of this study was to utilize an integrated approach including chemical contaminant analysis, sediment quality guidelines and grass shrimp population monitoring to evaluate the impact of contaminants from industrial sources. Three impacted sites and one reference site were selected for study. Grass shrimp populations were sampled using a push-netting approach. Sediment samples were collected at each site and analyzed for metals, polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and pesticides. Contaminant levels were then compared to sediment quality guidelines. In general, grass shrimp population densities at the sites decreased as the ERM quotients increased. Grass shrimp densities were significantly reduced at the impacted site that had an ERM exceedance for chromium and the highest Mean ERM quotient. Regression analysis indicated that sediment chromium concentrations were negatively correlated with grass shrimp density. Grass shrimp size was reduced at two sites with intermediate levels of contamination. These findings support the use of both sediment quality guidelines and site-specific population monitoring to evaluate the impacts of sediment-associated contaminants in estuarine systems.

The Early Anthropogenic Hypothesis: Top-Down and Bottom-up Evidence

NASA Astrophysics Data System (ADS)

Ruddiman, W. F.

2014-12-01

Two complementary lines of evidence support the early anthropogenic hypothesis. Top-down evidence comes from comparing Holocene greenhouse-gas trends with those during equivalent intervals of previous interglaciations. The increases in CO2 and CH4 during the late Holocene are anomalous compared to the decreasing trends in a stacked average of previous interglaciations, thereby supporting an anthropogenic origin. During interglacial stage 19, the closest Holocene insolation analog, CO2 fell to 245 ppm by the time equivalent to the present, in contrast to the observed pre-industrial rise to 280-285 ppm. The 245-ppm level measured in stage 19 falls at the top of the natural range predicted by the original anthropogenic hypothesis of Ruddiman (2003). Bottom-up evidence comes from a growing list of archeological and other compilations showing major early anthropogenic transformations of Earth's surface. Key examples include: efforts by Dorian Fuller and colleagues mapping the spread of irrigated rice agriculture across southern Asia and its effects on CH4 emissions prior to the industrial era; an additional effort by Fuller showing the spread of methane-emitting domesticated livestock across Asia and Africa (coincident with the spread of fertile crescent livestock across Europe); historical compilations by Jed Kaplan and colleagues documenting very high early per-capita forest clearance in Europe, thus underpinning simulations of extensive pre-industrial clearance and large CO2 emissions; and wide-ranging studies by Erle Ellis and colleagues of early anthropogenic land transformations in China and elsewhere.

Hydrophobic organic contaminants in surficial sediments of Baltimore Harbor: Inventories and sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ashley, J.T.F.; Baker, J.E.

1999-05-01

The heavily urbanized and industrialized Baltimore Harbor/Patapsco River/Back River system is one of the most highly contaminated regions of the Chesapeake Bay. In June 1996, surficial sediments were collected at 80 sites throughout the subestuarine system, including historically undersampled creek sand embayments. The samples were analyzed for a suite of hydrophobic organic contaminants (HOCs) consisting of 32 polycyclic aromatic hydrocarbons (PAHs) and 113 polychlorinated biphenyl (PCB) congeners. Total PAH and total PCB concentrations ranged from 90 to 46,200 and 8 to 2,150 ng/g dry weight, respectively. There was enormous spatial variability in the concentrations of HOCs, which was not wellmore » correlated to grain size or organic carbon content, suggesting nonequilibrium partitioning and/or proximity to sources as important factors explaining the observed spatial variability. High concentrations of both classes of HOCs were localized around major urban stormwater runoff discharges. Elevated PAH concentrations were also centered around the Sparrow`s Point Industrial Complex, most likely a result of the pyrolysis of coal during the production of steel. All but 1 of the 80 sites exceeded the effects range-low (ERL) for total PCBs and, of those sites, 40% exceeded the effects range-medium (ERM), suggesting toxicity to marine benthic organisms would frequently occur. Using principal component analysis, differences in PAH signatures were discerned. Higher molecular weight PAHs were enriched in signatures from sediments close to suspected sources (i.e., urban stormwater runoff and steel production complexes) compared to those patterns observed at sites further from outfalls or runoff. Due to varying solubilities and affinities for organic matter of the individual PAHs, partitioning of the heavier weight PAHs may enrich settling particles with high molecular weight PAHs. Lower molecular weight PAHs, having lower affinity for particles, may travel from the source to a greater extent.« less

Final Report for "Design calculations for high-space-charge beam-to-RF conversion".

DOE Office of Scientific and Technical Information (OSTI.GOV)

David N Smithe

2008-10-17

Accelerator facility upgrades, new accelerator applications, and future design efforts are leading to novel klystron and IOT device concepts, including multiple beam, high-order mode operation, and new geometry configurations of old concepts. At the same time, a new simulation capability, based upon finite-difference “cut-cell” boundaries, has emerged and is transforming the existing modeling and design capability with unparalleled realism, greater flexibility, and improved accuracy. This same new technology can also be brought to bear on a difficult-to-study aspect of the energy recovery linac (ERL), namely the accurate modeling of the exit beam, and design of the beam dump for optimummore » energy efficiency. We have developed new capability for design calculations and modeling of a broad class of devices which convert bunched beam kinetic energy to RF energy, including RF sources, as for example, klystrons, gyro-klystrons, IOT's, TWT’s, and other devices in which space-charge effects are important. Recent advances in geometry representation now permits very accurate representation of the curved metallic surfaces common to RF sources, resulting in unprecedented simulation accuracy. In the Phase I work, we evaluated and demonstrated the capabilities of the new geometry representation technology as applied to modeling and design of output cavity components of klystron, IOT's, and energy recovery srf cavities. We identified and prioritized which aspects of the design study process to pursue and improve in Phase II. The development and use of the new accurate geometry modeling technology on RF sources for DOE accelerators will help spark a new generational modeling and design capability, free from many of the constraints and inaccuracy associated with the previous generation of “stair-step” geometry modeling tools. This new capability is ultimately expected to impact all fields with high power RF sources, including DOE fusion research, communications, radar and other defense applications.« less

PREFACE: Northern Eurasia Earth Science Partnership Initiative

NASA Astrophysics Data System (ADS)

Groisman, Pavel; Soja, Amber J.

2009-12-01

The Northern Eurasia Earth Science Partnership Initiative (NEESPI) was launched five years ago with the release of its Science Plan (http://neespi.org). Gradually, the Initiative was joined by numerous international projects and launched in the European Union, Russia, United States, Canada, Japan, and China. Currently, serving as an umbrella for more than 130 individual research projects (always with international participation) and with a 15M annual budget, this highly diverse initiative is in full swing. Since the first NEESPI focus issue (Pavel Groisman et al 2007 Environ. Res. Lett. 2 045008 (1pp)) in December 2007, several NEESPI Workshops and Sessions at International Meetings have been held that strengthen the NEESPI grasp on biogeochemical cycle and cryosphere studies, climatic and hydrological modeling, and regional NEESPI components in the Arctic, non- boreal Eastern Europe, Central Asia, northern Siberia, and mountainous regions of the NEESPI domain. In May 2009, an overview NEESPI paper was published in the Bulletin of the American Meteorological Society (BAMS) (Pavel Groisman et al 2009 Bull. Am. Met. Soc. 90 671). This paper also formulated a requirement to the next generation of NEESPI studies to work towards attaining a higher level of integration of observation programs, process studies, and modeling, across disciplines. Three books devoted to studies in different regions of Northern Eurasia prepared by the members of the NEESPI team have appeared and/or are scheduled to appear in 2009. This (second) ERL focus issue dedicated to climatic and environmental studies in Northern Eurasia is composed mostly from the papers that were presented at two NEESPI Open Science Sessions at the Annual Fall Meeting of the American Geophysical Union (December 2008, San Francisco, CA) and at the General Assembly of the European Geosciences Union (April 2009, Vienna, Austria), as well as at the specialty NEESPI Workshops convened in Jena, Helsinki, Odessa, Urumqi, Krasnoyarsk, St Petersburg, and Bishkek during the past two years. As in the first NEESPI focus issue, papers that make up this second issue can be divided into five major topics: climate and hydrology; land cover and land use; the biogeochemical cycle and its feedbacks; cryosphere; human dimension. However, this partitioning is less rigid compared to the partitioning in the first Issue. Following the requirement of a higher level of integration outlined in the BAMS paper, many papers in this issue respond to two or even three of the topics listed above.

Reisen im freien Fall - Teil 2: Das Zwillingsparadoxon aus dem Blickwinkel der ART

NASA Astrophysics Data System (ADS)

Sonne, Bernd; Weiß, Reinhard

2013-07-01

Nachdem wir uns mit den Prinzipien der ART und einigen Beispielen vertraut gemacht haben, kommen wir nun zur Berechnung des Zwillingsparadoxons aus Sicht des reisenden Zwillings. Dabei spielt das Äquivalenzprinzip eine große Rolle. Deshalb wird die Bewegungssituation noch einmal erläutert, diesmal aus Sicht von Katrin. Sie befindet sich in ihrem System S'in Ruhe. In ihrem System läuft die Zeit t'ab. Nach dem Start fühlt Katrin jedoch eine Kraft, die sie als Gravitationskraft interpretieren kann. Sie merkt es daran, dass sie in den Sitz gedrückt wird. Nach einiger Zeit werden die Triebwerke abgeschaltet, und das Raumschiff fliegt mit konstanter Geschwindigkeit weiter, Phase 2. Anschließend wird der Schub der Triebwerke solange umgekehrt, bis das Raumschiff irgendwo mit der Geschwindigkeit null am Umkehrpunkt U landet, Phase 3 (Abb. 15.1). Die Erde, auf der sich Michael befindet, bewegt sich mit x'(t') aus Sicht von Katrin im freien Fall von ihr weg, s. das Experiment mit dem steigenden Fahrstuhl in Abschn. 13.2.1.

Darwinische Kulturtheorie - Evolutionistische und "evolutionistische`` Theorien sozialen Wandels

NASA Astrophysics Data System (ADS)

Antweiler, Christoph

Evolutionistische Argumentationen außerhalb der Biologie sind weit verbreitet. Wenn sie vertreten werden, heißt das mitnichten, dass sie notwendigerweise von darwinischen Argumenten geprägt sind. Wenn man Evolution und Kultur aus explizit darwinischer Perspektive zusammen bringt, bedeutet das noch lange nicht unbedingt Soziobiologie. Und es bedeutet sicherlich nicht Sozialdarwinismus. Dieser Beitrag soll einen Überblick der so genannten evolutionären Ansätze bzw. evolutionistischen Ansätze zu menschlichen Gesellschaften bzw. Kulturen geben. Es soll gezeigt werden, was in den Ansätzen analytisch zu trennen ist und was synthetisch zusammen gehört. Mein Beitrag ist nicht wissenschaftsgeschichtlich angelegt, sondern systematisch ausgerichtet und hat zwei Schwerpunkte (Antweiler 2008; Antweiler 2009b). Zum einen geht es um kausale Zusammenhänge von organischer Evolution und gesellschaftlichem Wandel. Auf der anderen Seite werden Analogien zwischen biotischer und kultureller Evolution erläutert, die als spezifische Ähnlichkeiten dieser beiden als grundsätzlich verschieden gesehenen Prozesse aufgefasst werden. Dadurch wird die Frage aufgeworfen, ob die Evolution von Organismen einerseits und die Transformation von Gesellschaften bzw. Kulturen andererseits, spezielle Fälle eines allgemeinen Modells von Evolution darstellen.

Marine biogeochemical influence on primary sea spray aerosol composition in the Southern Ocean: predictions from a mechanistic model

NASA Astrophysics Data System (ADS)

McCoy, D.; Burrows, S. M.; Elliott, S.; Frossard, A. A.; Russell, L. M.; Liu, X.; Ogunro, O. O.; Easter, R. C.; Rasch, P. J.

2014-12-01

Remote marine clouds, such as those over the Southern Ocean, are particularly sensitive to variations in the concentration and chemical composition of aerosols that serve as cloud condensation nuclei (CCN). Observational evidence indicates that the organic content of fine marine aerosol is greatly increased during the biologically active season near strong phytoplankton blooms in certain locations, while being nearly constant in other locations. We have recently developed a novel modeling framework that mechanistically links the organic fraction of submicron sea spray to ocean biogeochemistry (Burrows et al., in discussion, ACPD, 2014; Elliott et al., ERL, 2014). Because of its combination of large phytoplankton blooms and high wind speeds, the Southern Ocean is an ideal location for testing our understanding of the processes driving the enrichment of organics in sea spray aerosol. Comparison of the simulated OM fraction with satellite observations shows that OM fraction is a statistically significant predictor of cloud droplet number concentration over the Southern Ocean. This presentation will focus on predictions from our modeling framework for the Southern Ocean, specifically, the predicted geographic gradients and seasonal cycles in the aerosol organic matter and its functional group composition. The timing and location of a Southern Ocean field campaign will determine its utility in observing the effects of highly localized and seasonal phytoplankton blooms on aerosol composition and clouds. Reference cited: Burrows, S. M., Ogunro, O., Frossard, A. A., Russell, L. M., Rasch, P. J., and Elliott, S.: A physically-based framework for modelling the organic fractionation of sea spray aerosol from bubble film Langmuir equilibria, Atmos. Chem. Phys. Discuss., 14, 5375-5443, doi:10.5194/acpd-14-5375-2014, 2014. Elliott, S., Burrows, S. M., Deal, C., Liu, X., Long, M., Ogunro, O., Russell, L. M., and Wingenter O.. "Prospects for simulating macromolecular surfactant chemistry at the ocean-atmosphere boundary." Environmental Research Letters 9, no. 6 (2014): 064012.

Intensity of heat stress in winter wheat—phenology compensates for the adverse effect of global warming

NASA Astrophysics Data System (ADS)

Eyshi Rezaei, Ehsan; Siebert, Stefan; Ewert, Frank

2015-02-01

Higher temperatures during the growing season are likely to reduce crop yields with implications for crop production and food security. The negative impact of heat stress has also been predicted to increase even further for cereals such as wheat under climate change. Previous empirical modeling studies have focused on the magnitude and frequency of extreme events during the growth period but did not consider the effect of higher temperature on crop phenology. Based on an extensive set of climate and phenology observations for Germany and period 1951-2009, interpolated to 1 × 1 km resolution and provided as supplementary data to this article (available at stacks.iop.org/ERL/10/024012/mmedia), we demonstrate a strong relationship between the mean temperature in spring and the day of heading (DOH) of winter wheat. We show that the cooling effect due to the 14 days earlier DOH almost fully compensates for the adverse effect of global warming on frequency and magnitude of crop heat stress. Earlier heading caused by the warmer spring period can prevent exposure to extreme heat events around anthesis, which is the most sensitive growth stage to heat stress. Consequently, the intensity of heat stress around anthesis in winter crops cultivated in Germany may not increase under climate change even if the number and duration of extreme heat waves increase. However, this does not mean that global warning would not harm crop production because of other impacts, e.g. shortening of the grain filling period. Based on the trends for the last 34 years in Germany, heat stress (stress thermal time) around anthesis would be 59% higher in year 2009 if the effect of high temperatures on accelerating wheat phenology were ignored. We conclude that climate impact assessments need to consider both the effect of high temperature on grain set at anthesis but also on crop phenology.

Can the Afinion HbA1c Point-of-Care instrument be an alternative method for the Tosoh G8 in the case of Hb-Tacoma?

PubMed

Lenters-Westra, Erna; Strunk, Annuska; Campbell, Paul; Slingerland, Robbert J

2017-02-01

Hb-variant interference when reporting HbA1c has been an ongoing challenge since HbA1c was introduced to monitor patients with diabetes mellitus. Most Hb-variants show an abnormal chromatogram when cation-exchange HPLC is used for the determination of HbA1c. Unfortunately, the Tosoh G8 generates what appears to be normal chromatogram in the presence of Hb-Tacoma, yielding a falsely high HbA1c value. The primary aim of the study was to investigate if the Afinion HbA1c point-of-care (POC) instrument could be used as an alternative method for the Tosoh G8 when testing for HbA1c in the presence of Hb-Tacoma. Whole blood samples were collected in K 2 EDTA tubes from individuals homozygous for HbA (n = 40) and heterozygous for Hb-Tacoma (n = 20). Samples were then immediately analyzed with the Afinion POC instrument. After analysis, aliquots of each sample were frozen at -80 °C. The frozen samples were shipped on dry ice to the European Reference Laboratory for Glycohemoglobin (ERL) and analyzed with three International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) and National Glycohemoglobin Standardization Program (NGSP) Secondary Reference Measurement Procedures (SRMPs). The Premier Hb9210 was used as the reference method. When compared to the reference method, samples with Hb-Tacoma yielded mean relative differences of 31.8% on the Tosoh G8, 21.5% on the Roche Tina-quant Gen. 2 and 16.8% on the Afinion. The Afinion cannot be used as an alternative method for the Tosoh G8 when testing for HbA1c in the presence of Hb-Tacoma.

Efficient Computation of Coherent Synchrotron Radiation Taking into Account 6D Phase Space Distribution of Emitting Electrons

NASA Astrophysics Data System (ADS)

Chubar, O.; Couprie, M.-E.

2007-01-01

CPU-efficient method for calculation of the frequency domain electric field of Coherent Synchrotron Radiation (CSR) taking into account 6D phase space distribution of electrons in a bunch is proposed. As an application example, calculation results of the CSR emitted by an electron bunch with small longitudinal and large transverse sizes are presented. Such situation can be realized in storage rings or ERLs by transverse deflection of the electron bunches in special crab-type RF cavities, i.e. using the technique proposed for the generation of femtosecond X-ray pulses (A. Zholents et. al., 1999). The computation, performed for the parameters of the SOLEIL storage ring, shows that if the transverse size of electron bunch is larger than the diffraction limit for single-electron SR at a given wavelength — this affects the angular distribution of the CSR at this wavelength and reduces the coherent flux. Nevertheless, for transverse bunch dimensions up to several millimeters and a longitudinal bunch size smaller than hundred micrometers, the resulting CSR flux in the far infrared spectral range is still many orders of magnitude higher than the flux of incoherent SR, and therefore can be considered for practical use.

Environmental quality in sediments of Cadiz and Algeciras Bays based on a weight of evidence approach (southern Spanish coast).

PubMed

Usero, José Antonio; Rosado, Daniel; Usero, José; Morillo, José

2016-09-15

This research applies an integrated sediment quality assessment method using a weight of evidence approach to Cadiz and Algeciras Bays (southern Spain). The method is composed of several analyses (particle size profile, aqua regia extractable metals, acid labile metals, total organic carbon, toxicity bioassay with Photobacterium phosphoreum and macrobenthic community alteration). The proposed method provides a single result, the environmental degradation index (EDI). EDI defined samples as low degraded (outer areas of both bays) and moderately degraded (Inner Bay of Cadiz Bay, the surroundings of Algeciras port and the northern part of Algeciras Bay). These samples showed the highest concentration of aqua regia extractable metals, which exceeded effects range-low (ERL) for Zn (51-176mg/l), Cu (11-54mg/l), As (4.3-9.5mg/l), Hg (0.17-0.28mg/l), Ni (23-82mg/l), and. Cr (37-134mg/l). They also exceeded some quality criteria for total organic carbon (4.0-6.5%) and toxicity (120-240TU/g) and showed poor results for macrobenthic community. Copyright © 2016 Elsevier Ltd. All rights reserved.

Tanzendes Tier oder exzentrische Positionalität - Philosophische Anthropologie zwischen Darwinismus und Kulturalismus

NASA Astrophysics Data System (ADS)

Fischer, Joachim

Zunächst kurz vorweg zu den Formeln im Titel: "exzentrische Positionalität“ ist der Kategorienvorschlag der Philosophischen Anthropologie (genauer: von Helmuth Plessner) für den Menschen, für seine "Sonderstellung“ unter den Lebewesen - ich werde diesen Begriff erläutern. So viel kann man sagen: Der Terminus ist nicht schwieriger als "Transzendentalität“ oder das "Apriori“ oder "Autopoiesis“, also Begriffe, mit deren Orientierungswert in der intellektuellen Öffentlichkeit bereits gespielt wird, bietet aber möglicherweise mehr Erschließungskraft als die Kunstbegriffe z. B. von Kant, Maturana oder Luhmann. Und "tanzendes Tier“ ist ein glücklicher Anschauungsbegriff, eine Art Übersetzung für "exzentrische Positionalität“ - also ein "verrücktes“ Lebewesen, eine Verrückung im evolutionären Leben, die dieses Lebewesen von Natur aus zu einer bestimmten Art von Lebensführung, nämlich Kultur nötigt. Die Absicht des Beitrages ist es, die Philosophische Anthropologie als eine spezifische Theorietechnik zu präsentieren, um einen adäquaten Begriff des Menschen zu erreichen, und zwar eine Theoriestrategie angesichts des cartesianischen Dualismus - also des Dualismus zwischen Naturalismus und Kulturalismus.

Occurrence, sources, and ecological risks of PBDEs, PCBs, OCPs, and PAHs in surface sediments of the Yangtze River Delta city cluster, China.

PubMed

Zhang, Ting; Yang, Wen-Long; Chen, She-Jun; Shi, Dian-Long; Zhao, Hu; Ding, Yi; Huang, Ye-Ru; Li, Nan; Ren, Yue; Mai, Bi-Xian

2014-08-01

Polybrominated diphenyl ethers (PBDEs), organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) in 25 surface sediments in three cities (Nantong, Wuxi, and Suzhou) in the Yangtze River Delta, eastern China were measured. The mean concentrations were 378, 45.8, 1.98, 4,002 ng/g for PBDEs, OCPs, PCBs, and PAHs, respectively. Their levels in the sediments in the three cities were generally consistent with the city industrialization. PBDEs and OCPs were markedly dominated by deca-BDE (>90 %) and DDTs (>70 %). A principle component analysis of the analytes identified three major factors suggesting different sources of the contaminants in the sediments. PBDEs and the organic carbon in the sediments have common sources from industrial activities; whereas OCPs and PCBs, correlated with the second factor, were mainly from historical sources. The third factor with loadings of PAHs is indicative of various combustion sources. Ecological risk assessment indicated that the potential highest risk is from DDTs, for which 22 sites exceed the effects range low (ERL) values and three sites exceed the effects range median (ERM) value.

Effects of ply thickness on thermal cycle induced damage and thermal strain

NASA Astrophysics Data System (ADS)

Tompkins, Stephen S.

1994-07-01

An experimental study was conducted to determine the effects of ply thickness in composite laminates on thermally induced cracking and changes in the coefficient of thermal expansion, CTE. A graphite-epoxy composite material, P75/ERL 1962, in thin (1 mil) and thick (5 mils) prepregs was used to make cross-ply laminates, ((0/90)(sub n))s, with equal total thickness (n=2, n=10) and cross-ply laminates with the same total number of plies (n=2). Specimens of each laminate configuration were cycled up to 1500 times between -250 and 250 F. Thermally induced microdamage was assessed as a function of the number of cycles as was the change in CTE. The results showed that laminates fabricated with thin-plies microcracked at significantly different rates and reached significantly different equilibrium crack densities than the laminate fabricated with thick-ply and n=2. The CTE of thin-ply laminates was less affected by thermal cycling and damage than the CTE of thick-ply laminates. These differences are attributed primarily to differences in interply constraints. Observed effects of ply thickness on crack density was qualitatively predicted by a combined shear-lag stress/energy method.

Effects of ply thickness on thermal cycle induced damage and thermal strain

NASA Technical Reports Server (NTRS)

Tompkins, Stephen S.

1994-01-01

An experimental study was conducted to determine the effects of ply thickness in composite laminates on thermally induced cracking and changes in the coefficient of thermal expansion, CTE. A graphite-epoxy composite material, P75/ERL 1962, in thin (1 mil) and thick (5 mils) prepregs was used to make cross-ply laminates, ((0/90)(sub n))s, with equal total thickness (n=2, n=10) and cross-ply laminates with the same total number of plies (n=2). Specimens of each laminate configuration were cycled up to 1500 times between -250 and 250 F. Thermally induced microdamage was assessed as a function of the number of cycles as was the change in CTE. The results showed that laminates fabricated with thin-plies microcracked at significantly different rates and reached significantly different equilibrium crack densities than the laminate fabricated with thick-ply and n=2. The CTE of thin-ply laminates was less affected by thermal cycling and damage than the CTE of thick-ply laminates. These differences are attributed primarily to differences in interply constraints. Observed effects of ply thickness on crack density was qualitatively predicted by a combined shear-lag stress/energy method.

Biased towards food: Electrophysiological evidence for biased attention to food stimuli.

PubMed

Kumar, Sanjay; Higgs, Suzanne; Rutters, Femke; Humphreys, Glyn W

2016-12-01

We investigated the neural mechanisms involved in bias for food stimuli in our visual environment using event related lateralized (ERL) responses. The participants were presented with a cue (food or non-food item) to either identify or hold in working memory. Subsequently, they had to search for a target in a 2-item display where target and distractor stimuli were each flanked by a picture of a food or a non-food item. The behavioural data showed that performance was strongly affected by food cues, especially when food was held in WM compared to when the cues were merely identified. The temporal dynamics of electrophysiological measures of attention (the N1pc and N2pc) showed that the orienting of attention towards food stimuli was associated with two different mechanisms; an early stage of attentional suppression followed by a later stage of attentional orienting towards food stimuli. In contrast, non-food cues were associated only with the guidance of attention to or away from cued stimuli on valid and invalid trials. The results demonstrate that food items, perhaps due to their motivational significance modulate the early orienting of attention, including an initial suppressive response to food items. Copyright © 2016 The Authors. Published by Elsevier Inc. All rights reserved.

Effects of various cavity designs on the performance of a CO2 TEA laser with an unstable resonator

NASA Technical Reports Server (NTRS)

Zhao, Yanzeng; Post, Madison J.; Lawrence, T. R.

1992-01-01

Unstable resonator modeling has been carried out for an injection-seeded CO2 transversely excited atmosphere (TEA) laser in the NOAA/ERL/Wave Propagation Laboratory (WPL) Doppler lidar to examine the effects of various cavity designs on the quality of the output beam. The results show the effects of an injection pinhole, electrode spacing, mirror tilt, and radial reflectivity function of the output coupler. The electrode spacing in this laser has negligible effect. The injection pinhole, however, produces complicated structures in the output patterns. If the pinhole is removed, the output pattern is much smoother, and the frequency jitter is smaller. Misalignment sensitivity is very closely related to the radial reflectivity function. The superparabolic function provides the highest coupling efficiency, largest beam size, and good collimation, but produces a slightly higher misalignment sensitivity compared with a parabolic function. The Gaussian function provides the lowest misalignment sensitivity, but it produces the smallest beam size and the largest beam divergence. Also, the coupling coefficient is 50 percent lower than the optimum value. Methods for using a flat diffraction grating in unstable resonators are also investigated. The best way is to use a flat grating/positive lens combination to replace the back concave mirror.

Frühe Stresserfahrungen und Krankheitsvulnerabilität

PubMed Central

Entringer, Sonja; Buss, Claudia; Heim, Christine

2016-01-01

Zusammenfassung Hintergrund Das stetig wachsende Forschungsgebiet der “Frühe[n] Programmierung von Krankheit und Gesundheit” untersucht, inwieweit die individuelle Vulnerabilität für die Entstehung verschiedenster Erkrankungen über die Lebensspanne bereits während der frühen Entwicklung beeinflusst wird. Ziele der Arbeit In der vorliegenden Übersichtsarbeit werden das Konzept der frühen Programmierung von Krankheitsvulnerabilität erläutert sowie Befunde zu den Folgen frühkindlicher Traumatisierung und pränataler Stressexposition zusammenfassend dargestellt. Es werden außerdem biologische Mechanismen diskutiert, die das erhöhte Krankheitsrisiko nach lebensgeschichtlich früher Stresserfahrungen vermitteln. Die Möglichkeit der transgenerationalen Transmission frühkindlicher Erfahrungen an die nächste Generation und die zugrundeliegenden Mechanismen dieser Übertragung werden ebenfalls vorgestellt. Fazit Die Befundlage zu Stresserfahrungen im frühen Leben und der Entstehung von psychischen und körperlichen Störungen über die Lebensspanne wächst stetig. Die Mechanismen werden derzeit weiter bis hin zur molekularbiologischen und epigenetischen Ebene erforscht. Hier ergeben sich ganz neue Perspektiven, welche die Präzision klinischer Diagnostik und den Erfolg von Interventionen erheblich verbessern könnten. Momentan existiert jedoch noch ein erheblicher Mangel an Translation zwischen diesen Forschungserkenntnissen und deren Anwendung in der klinischen Versorgung. PMID:27604117

Radionuclides (210Po and 210Pb) and Some Heavy Metals in Fish and Sediments in Lake Bafa, Turkey, and the Contribution of 210Po to the Radiation Dose.

PubMed

Manav, Ramazan; Uğur Görgün, Aysun; Filizok, Işık

2016-11-09

The pollution level of Lake Bafa was investigated by collecting fish samples { Dicentrarchus labrax (sea bass), Liza ramada (mullet) and Anguilla anguilla (eel)}, surface sediment, and core samples. In all these samples, 210 Po and 210 Pb concentrations were estimated, and total annual dose rates were obtained for each species. Some heavy metal (Cr, Ni, Pb, Cd, Mn, Fe, and Zn) concentration levels were obtained for the fish and a core sample. The sediment mass accumulation rate was found to be 3.27 g·m -2 ·day -1 (0.119 g·cm -2 ·y -1 ) from a core sample. The heavy metal concentrations in the vertical profile of samples from the core were also observed. The measured concentration of Zn, Pb, Cd, and Cr were between the ERL (effects range low) and ERM (effects range median) limits, while Ni concentrations were higher than the ERM limit. The observed concentrations of Cd, Pb, and Zn in fish samples did not exceed the limits in accordance with Turkish Food Regulations. Further, the maximum effective dose equivalent of 210 Po in the area was found to be 1.169 µSv·y -1 .

The influence of extreme seasonality on lake temperatures during Younger Dryas

NASA Astrophysics Data System (ADS)

Schenk, F.; Stranne, C.; Wohlfarth, B.

2016-12-01

The Younger Dryas cold reversal ( 12.9 to 11.7 kyr BP) is the last abrupt climate change event interrupting the warming of the late deglaciation right before the onset of the Holocene. The spatial pattern of the cooling event seen in proxy data is largely consistent with those of climate simulations and suggests that the Younger Dryas is linked to a significant slowdown of the Atlantic Meridional Overturning Circulation (AMOC). However, despite the strong ocean cooling of up to 6 K along the European coasts and a significant southward extension of sea-ice during the Younger Dryas, different climate simulations do not reproduce summer cooling over Europe as seen in July lake temperature reconstructions based on chironomids. Aquatic plants used as climate indicator species do in contrast not show such a strong cooling and are more in line with climate simulations. To investigate this discrepancy, we use two numerical lake models driven by high resolution climate model output for the Younger Dryas and the preceding warm period of the late Alleröd ( 13 kyr BP). First, we investigate to which extent simulated lake temperatures in summer still reflect atmospheric summer temperatures despite a strong increase in seasonality during Younger Dryas. Because the (paleo-)lake depths are usually not well known, we use the lake models to test their sensitivity to changes in seasonality as a function of depth. Second, we artificially change the temperatures used as forcing for the lake models to investigate how cold air temperatures would need to be to match the up to 5 K July cooling suggested by chironomids. The results show that more care needs to be taken about the location and (paleo-)lake depths when comparing lake temperatures with simulated air temperatures. The simulated atmospheric circulation patterns during summer appears to be rather insensitive to the Younger Dryas cooling owing to the dominance of high atmospheric pressure over the Euro-Atlantic region. This would support a recent study linking extremely cold North Atlantic Ocean temperature anomalies to severe heat waves in Europe since the 1980s (Duchez et al. 2016, ERL, Vol. 11, No. 7).

Distributions and potential sources of polycyclic aromatic hydrocarbons in surface sediments from an emerging industrial city (Xinxiang).

PubMed

Feng, Jinglan; Xi, Nannan; Zhang, Fei; Zhao, Jiahui; Hu, Pengtuan; Sun, Jianhui

2016-01-01

To investigate the distributions, degree, and possible sources of polycyclic aromatic hydrocarbons (PAHs) in bed sediments from four rivers of Xinxiang, 18 sediment samples were analyzed. The concentrations ranged from 4.45 × 10(3) to 29.0 × 10(3) ng/g for ∑15PAHs (sum of US Environmental Protection Agency (EPA) priority PAHs apart from naphthalene (Nap)) and 3.37 × 10(3) to 23.5 × 10(3) ng/g for ∑7carPAHs (including benzo[a]anthracene (BaA), chrysene (Chr), benzo[b]fluoranthene (BbF), benzo[k]fluoranthene (BkF), benzo[a]pyrene (BaP), dibenzo[a,h]anthracene (DBA), and indeno[1,2,3-cd]pyrene (InP)) with average concentrations of 10.7 × 10(3) and 7.99 × 10(3) ng/g, respectively. Compared with those from other rivers in China, sediments from four rivers of Xinxiang were severely polluted with PAHs. Pearson correlation analysis showed that ∑15PAHs concentrations had a significant positive correlation with black carbon content. Four- to six-ring PAHs accounted for 83.4 % of total PAHs, which indicated that the main source of PAHs in the studied area could be pyrogenic contamination. Source apportionment using PCA/MLR and UNMIX revealed that coal and biomass combustion contributed 64.4-67.1 %, gasoline vehicle 23.2-27.2 %, and diesel vehicle 5.70-12.4 % of the total PAHs, respectively. The effects range low/effects range median (ERL/ERM) values showed that there was a high level of toxicity risk for BaA. The ecological risk assessment by mean effects range median quotients (mERMQ) revealed a medium ecological risk of ∑15PAHs in sediments from four rivers of Xinxiang, manifesting that a close attention should be paid to pollution of PAHs in the studied area.

Determination of iodide with 1,3-dibromo-5,5-dimethylhydantoin (DBH) in comparison with the ICl-method. Analytical methods of pharmacopeias with DBH in respect to environmental and economical concern. Part 3.

PubMed

Hilp, M; Senjuk, S

2001-06-01

USP 1995 (The United States Pharmacopeia, 23rd Edit., (1995), potassium iodide p. 1265, sodium iodide p. 1424), PH. EUR. 1997 (European Pharmacopoeia, third ed., Council of Europe, Strasbourg, (1997), potassium iodide p. 1367, sodium iodide p. 1493) and JAP 1996 (The Japanes Pharmacopoeia, 13th ed. (1996), potassium iodide p. 578, sodium iodide p. 630) determine iodide with the ICl-method (J. Am. Chem. Soc. 25 (1903) 756-761; Z. Anorg. Chem. 36 (1903) 76-83; Fresenius Z. Anal. Chem. 106 (1936) 12-23; Arzneibuch-Kommentar, Wissenschaftliche Erläuterungen zum Europäischen Arzneibuch, Wissenschaftliche Verlagsgesellschaft mbH, Stuttgart, Govi-Verlag - Pharmazeutischer Verlag GmbH, Eschborn, 12th suppl. (1999), K10 p. 2), using chloroform, which is toxic and hazardous to environment. Without the application of chlorinated hydrocarbons USP 2000 (The United State Pharmacopeia, 24th ed. (2000), potassium iodide p. 1368, sodium iodide p. 1535) and Brit 1999 (British Pharmacopoeia London, (1999), Appendix VIII C, p. A162) titrate iodide with the redox indicator amaranth. A titration with potentiometric indication giving two end-points at the step of I(2) and [ICl(2)](-) is described. Due to the high concentration of hydrochloric acid required for the ICl-method, the determination with DBH (1,3-dibromo-5,5-dimethylhydantoin; 1,3-dibromo-5,5-dimethyl-2,4-imidazolidinedione) can be recommended and is performed easily. Similarly, the iodide content of gallamine triethiodide may be analyzed with DBH by application of a visual two-phase titration in water and ethyl acetate or with potentiometric indication in a mixture of 2-propanol and water. During the removal of the excess of DBH 4-bromo-triethylgallamine (2,2',2"-[1-bromo-benzene-2,3,4-triyltris(oxy)]N,N,N-triethylethanium) is formed.

Regulation of plant vascular stem cells by endodermis-derived EPFL-family peptide hormones and phloem-expressed ERECTA-family receptor kinases.

PubMed

Uchida, Naoyuki; Tasaka, Masao

2013-12-01

Plant vasculatures are complex tissues consisting of (pro)cambium, phloem, and xylem. The (pro)cambium serves as vascular stem cells that produce all vascular cells. The Arabidopsis ERECTA (ER) receptor kinase is known to regulate the architecture of inflorescence stems. It was recently reported that the er mutation enhances a vascular phenotype induced by a mutation of TDR/PXY, which plays a significant role in procambial proliferation, suggesting that ER participates in vascular development. However, detailed molecular mechanisms of the ER-dependent vascular regulation are largely unknown. Here, this work found that ER and its paralogue, ER-LIKE1, were redundantly involved in procambial development of inflorescence stems. Interestingly, their activity in the phloem was sufficient for vascular regulation. Furthermore, two endodermis-derived peptide hormones, EPFL4 and EPFL6, were redundantly involved in such regulation. It has been previously reported that EPFL4 and EPFL6 act as ligands of phloem-expressed ER for stem elongation. Therefore, these findings indicate that cell-cell communication between the endodermis and the phloem plays an important role in procambial development as well as stem elongation. Interestingly, similar EPFL-ER modules control two distinct developmental events by slightly changing their components: the EPFL4/6-ER module for stem elongation and the EPFL4/6-ER/ERL1 module for vascular development.

Assessment and ecological indicators of total and polycyclic aromatic hydrocarbons in the aquatic environment of lake Manzala, Egypt.

PubMed

El-Kady, Ahmed A; Wade, Terry L; Sweet, Stephen T

2018-04-06

The study objective was to assess the profile of aliphatic and polycyclic aromatic hydrocarbons in the aquatic environment of Lake Manzala and to determine the potential sources and effects of these hydrocarbons. To reach these objectives 24 surface sediment and 24 tilapia fish were collected and analyzed using GC-FID and GC-MS. The highest concentrations for n-alkanes (∑n-C 15-35 ) (19,625 ng g -1 ) and PAHs (∑45PAHs) (5,153 ng g -1 ) were found in sediments collected from Bahr Al-Baqar drain while Al-Temsah and Al-Hamra sites contained the lowest concentrations. Different diagnostic molecular ratios for hydrocarbons were used to evaluate sources of the hydrocarbons. The hydrocarbons were found to have differing proportions of petrogenic, pyrogenic, and biogenic sources. Comparison to sediment quality guidelines indicated PAHs were below the effect range low (ERL) with the exception of acenaphthene, fluorine, and ∑45PAHs in Bahr Al-Baqar drain sediments. Tissue samples had moderate PAH concentrations for ∑45PAHs ranging from 302.5 ng g -1 West of Bashteer (S3) to 596 ng g -1 in Legam (S5). Since fish metabolize PAH quickly, their detection suggest continual or very recent exposure. The PAH in sediment and fish from Lake Manzala are at a low or below level of environmental concern.

Near-field receiving water monitoring of trace metals and a benthic community near the Palo Alto regional water quality control plant in south San Francisco Bay, California: 2005

USGS Publications Warehouse

Cain, Daniel J.; Parcheso, Francis; Thompson, Janet K.; Luoma, Samuel N.; Lorenzi, Allison H.; Moon, Edward; Shouse, Michelle K.; Hornberger, Michelle I.; Dyke, Jessica

2006-01-01

Trace elements in sediment and the clam Macoma petalum (formerly reported as Macoma balthica (Cohen and Carlton 1995), clam reproductive activity and benthic, macroinvertebrate community structure are reported for a mudflat one kilometer south of the discharge of the Palo Alto Regional Water Quality Control Plant in South San Francisco Bay. This report includes data collected for the period January to December 2005, and extends a critical long-term biogeochemical record dating back to 1974. These data serve as the basis for the City of Palo Alto's Near-Field Receiving Water Monitoring Program, initiated in 1994. Metal concentrations in both sediments and clam tissue during 2005 were consistent with results observed since 1990. Copper and zinc concentrations in sediment and bivalve tissue displayed a continued decrease over the last decade. In 2005, Cu concentrations were at or below the effects range-low (ERL) concentration (34 ?g/g) for the entire year, the first time this has been observed. Also, zinc concentrations never exceeded the ERL (150 ?g/g). Yearly average concentrations of copper, zinc and silver in Macoma petalum for 2005 were some of the lowest recorded since monitoring for metals began in 1975. The concentrations of mercury and selenium in sediments, during April and January 2004, respectively, were the highest values observed for these elements during this study. Later in 2005, concentrations decreased to historic levels. The increase in mercury and selenium in 2004 was not a permanent trend and concentrations of these elements in sediments and clams at Palo Alto remain similar to concentrations observed elsewhere in the San Francisco Bay. Analyses of the benthic-community structure of a mudflat in South San Francisco Bay over a 31-year period show that changes in the community have occurred concurrent with reduced concentrations of metals in the sediment and in the tissues of the biosentinal clam Macoma petalum from the same area. Analysis of the reproductive activity of M. petalum shows increases in reproductive activity concurrent with the decline in metal concentrations in the tissues of this organism. Reproductive activity is presently stable with almost all animals initiating reproduction in the fall and spawning the following spring of most years. The community has shifted from being dominated by several opportunistic species to a community where the species are more similar in abundance, a pattern that suggests a more stable community that is subjected to less stress. In addition, two of the opportunistic species (Ampelisca abdita and Streblospio benedicti) that brood their young and live on the surface of the sediment in tubes have shown a continual decline in dominance coincident with the decline in metals. Heteromastus filiformis, a subsurface polychaete worm that lives in the sediment, consumes sediment and organic particles residing in the sediment, and reproduces by laying their eggs on or in the sediment has shown a concurrent increase in dominance. These changes in species dominance reflect a change in the community from one dominated by surface dwelling, brooding species to one with species with varying life history characteristics. For the first time since its invasion in 1986, the non-indigenous filter-feeding bivalve Corbula (Potamocorbula) amurensis has shown up in small but persistent numbers in the benthic community.

In vivo potency revisited - Keep the target in sight.

PubMed

Gabrielsson, Johan; Peletier, Lambertus A; Hjorth, Stephan

2018-04-01

Potency is a central parameter in pharmacological and biochemical sciences, as well as in drug discovery and development endeavors. It is however typically defined in terms only of ligand to target binding affinity also in in vivo experimentation, thus in a manner analogous to in in vitro studies. As in vivo potency is in fact a conglomerate of events involving ligand, target, and target-ligand complex processes, overlooking some of the fundamental differences between in vivo and in vitro may result in serious mispredictions of in vivo efficacious dose and exposure. The analysis presented in this paper compares potency measures derived from three model situations. Model A represents the closed in vitro system, defining target binding of a ligand when total target and ligand concentrations remain static and constant. Model B describes an open in vivo system with ligand input and clearance (Cl (L) ), adding in parallel to the turnover (k syn , k deg ) of the target. Model C further adds to the open in vivo system in Model B also the elimination of the target-ligand complex (k e(RL) ) via a first-order process. We formulate corresponding equations of the equilibrium (steady-state) relationships between target and ligand, and complex and ligand for each of the three model systems and graphically illustrate the resulting simulations. These equilibrium relationships demonstrate the relative impact of target and target-ligand complex turnover, and are easier to interpret than the more commonly used ligand-, target- and complex concentration-time courses. A new potency expression, labeled L 50 , is then derived. L 50 is the ligand concentration at half-maximal target and complex concentrations and is an amalgamation of target turnover, target-ligand binding and complex elimination parameters estimated from concentration-time data. L 50 is then compared to the dissociation constant K d (target-ligand binding affinity), the conventional Black & Leff potency estimate EC 50 , and the derived Michaelis-Menten parameter K m (target-ligand binding and complex removal) across a set of literature data. It is evident from a comparison between parameters derived from in vitro vs. in vivo experiments that L 50 can be either numerically greater or smaller than the K d (or K m ) parameter, primarily depending on the ratio of k deg -to-k e(RL) . Contrasting the limit values of target R and target-ligand complex RL for ligand concentrations approaching infinity demonstrates that the outcome of the three models differs to a great extent. Based on the analysis we propose that a better understanding of in vivo pharmacological potency requires simultaneous assessment of the impact of its underlying determinants in the open system setting. We propose that L 50 will be a useful parameter guiding predictions of the effective concentration range, for translational purposes, and assessment of in vivo target occupancy/suppression by ligand, since it also encompasses target turnover - in turn also subject to influence by pathophysiology and drug treatment. Different compounds may have similar binding affinity for a target in vitro (same K d ), but vastly different potencies in vivo. L 50 points to what parameters need to be taken into account, and particularly that closed-system (in vitro) parameters should not be first choice when ranking compounds in vivo (open system). Copyright © 2017 Elsevier Inc. All rights reserved.

Predictive validity of neurotic disorders: a 50-year follow-up study.

PubMed

Jepsen, Peter Winning; Butler, Birgitte; Rasmussen, Stig; Juel, Knud; Bech, Per

2014-06-01

In 1965, Erling Jacobsen (1919-1988) defended his doctoral thesis on neurosis in which he tested the psychoanalytic theory of eridophobia as an internalising hostility factor with a specific causality for anxiety neurosis. He found no marked difference between anxiety neurosis and obsessive-compulsive neurosis, which, however, both differed from hysterical neurosis. The aim of this follow-up study was to evaluate to which extent anxiety neurosis and obsessive-compulsive neurosis when compared with hysterical neurosis co-existed with depression, both at the level of diagnostic behaviour, including committed suicide, and with regard to symptom profile. A total of 112 patients were followed on the Danish Central Psychiatric Research Register and the Danish Cause of Death Register with regard to their diagnostic behaviour. In a subset of the sample (n = 24), the patients were assessed using the Hopkins Symptom Checklist (SCL)-90. Both at the diagnostic level, including suicide rate, and at the level of symptom severity (SCL-90), anxiety neurosis and obsessive-compulsive neurosis were similar, in contrast to hysterical neurosis which had no more association with the other two categories of neurosis than would be expected by chance. Anxiety neurosis and obsessive-compulsive neurosis are more severe disorders than hysterical neurosis, both in terms of symptom profile and depression, including suicidal behaviour. The identified suicides were committed within the first two decades after discharge from the index hospitalisation. Poul M. Færgemann's Grant and the Neurosis Grant of 22 July 1959. not relevant.

Adaptive mechanisms and genomic plasticity for drought tolerance identified in European black poplar (Populus nigra L.)

PubMed Central

Viger, Maud; Smith, Hazel K.; Cohen, David; Dewoody, Jennifer; Trewin, Harriet; Steenackers, Marijke; Bastien, Catherine; Taylor, Gail

2016-01-01

Summer droughts are likely to increase in frequency and intensity across Europe, yet long-lived trees may have a limited ability to tolerate drought. It is therefore critical that we improve our understanding of phenotypic plasticity to drought in natural populations for ecologically and economically important trees such as Populus nigra L. A common garden experiment was conducted using ∼500 wild P. nigra trees, collected from 11 river populations across Europe. Phenotypic variation was found across the collection, with southern genotypes from Spain and France characterized by small leaves and limited biomass production. To examine the relationship between phenotypic variation and drought tolerance, six genotypes with contrasting leaf morphologies were subjected to a water deficit experiment. ‘North eastern’ genotypes were collected at wet sites and responded to water deficit with reduced biomass growth, slow stomatal closure and reduced water use efficiency (WUE) assessed by Δ13C. In contrast, ‘southern’ genotypes originating from arid sites showed rapid stomatal closure, improved WUE and limited leaf loss. Transcriptome analyses of a genotype from Spain (Sp2, originating from an arid site) and another from northern Italy (Ita, originating from a wet site) revealed dramatic differences in gene expression response to water deficit. Transcripts controlling leaf development and stomatal patterning, including SPCH, ANT, ER, AS1, AS2, PHB, CLV1, ERL1–3 and TMM, were down-regulated in Ita but not in Sp2 in response to drought. PMID:27174702

Formulation, in vitro and in vivo evaluation of transdermal patches containing risperidone.

PubMed

Aggarwal, Geeta; Dhawan, Sanju; Hari Kumar, S L

2013-01-01

The efficacy of oral risperidone treatment in prevention of schizophrenia is well known. However, oral side effects and patient compliance is always a problem for schizophrenics. In this study, risperidone was formulated into matrix transdermal patches to overcome these problems. The formulation factors for such patches, including eudragit RL 100 and eudragit RS 100 as matrix forming polymers, olive oil, groundnut oil and jojoba oil in different concentrations as enhancers and amount of drug loaded were investigated. The transdermal patches containing risperidone were prepared by solvent casting method and characterized for physicochemical and in vitro permeation studies through excised rat skin. Among the tested preparations, formulations with 20% risperidone, 3:2 ERL 100 and ERS 100 as polymers, mixture of olive oil and jojoba oil as enhancer, exhibited greatest cumulative amount of drug permeated (1.87 ± 0.09 mg/cm(2)) in 72 h, so batch ROJ was concluded as optimized formulation and assessed for pharmacokinetic, pharmacodynamic and skin irritation potential. The pharmacokinetic characteristics of the optimized risperidone patch were determined using rabbits, while orally administered risperidone in solution was used for comparison. The calculated relative bioavailability of risperidone transdermal patch was 115.20% with prolonged release of drug. Neuroleptic efficacy of transdermal formulation was assessed by rota-rod and grip test in comparison with control and marketed oral formulations with no skin irritation. This suggests the transdermal application of risperidone holds promise for improved bioavailability and better management of schizophrenia in long-term basis.

Design of a modified Halbach magnet for the CBETA Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsoupas, Nicholaos; Berg, J. S.; Brooks, S.

A modified Halbach magnet has been designed to be installed in the splitter/merger section of the CBETA project which is under construction at Cornell University. The splitter/merger of the CBETA consists of 4 beam lines and is shown in Fig. 1. Two of the functions of the splitter/merger lines are; first to match the beam parameters at the exit of the Energy Recovery Linac (ERL) to those at the entrance of the Fixed Field Alternating Gradient (FFAG) arc, and second to place the trajectories of the reference particles of the beam bunches at the entrance of the FFAG arc onmore » specified trajectories as they determined by the beam optics of the FFAG arc. In this technical note we present results from the 2D and 3D electromagnetic analysis of the S4.BEN01 magnet which is one of the dipole magnets of the 150 MeV line of the splitter/merger. The present design of the S4.BEN01 magnet, is based on a modified Halbach-type permanent magnet. To justify our suggestion of using a Halbach type of magnet instead of an electromagnet for the S4.BEN01 magnet we devote an APPENDIX A in which we provide details on the design of an electromagnet for the S4.BEN01 magnet and in the section under conclusion will list the pros and cons of the two designs.« less

Bacteriophage Infecting the Myxobacterium Chondrococcus columnaris

PubMed Central

Kingsbury, David T.; Ordal, Erling J.

1966-01-01

Kingsbury, David T. (University of Washington, Seattle), and Erling J. Ordal. Bacteriophage infecting the myxobacterium Chondrococcus columnaris. J. Bacteriol. 91:1327–1332. 1966.—During a series of screening experiments, seven bacteriophages which infect the pathogenic myxobacterium Chondrococcus columnaris were isolated. Of these, one was chosen for detailed study. This phage has a wide host range among strains of C. columnaris, but does not infect other myxobacterial species tested. Morphologically, this phage resembles coliphage T2, though it is smaller. It has a head diameter of 600 A, a tail length of 1,000 A, and a tail width of 200 A. The head is attached to the tail by a well-defined neck. The turbid plaques produced by this phage are similar in appearance to those produced by coliphage λ, and average 1 mm in diameter. The phage has a latent period of 100 min, a rise period of an additional 90 min, and a burst size of 23. Calcium ions at a concentration of 0.004 m are required for adsorption. This requirement cannot be met by substitution of magnesium ions. A purified preparation of 2 × 1012 phage particles was extracted with phenol, and the nucleic acid was identified as deoxyribonucleic acid (DNA). Base ratios of the phage DNA and the DNA of two propagating strains were similar. Streptomycin at a concentration of 70 μg/ml inhibits phage infection at an early stage, probably by inhibiting injection of the phage DNA. Images PMID:5929758

Growth and enzymatic responses of phytopathogenic fungi to glucose in culture media and soil

PubMed Central

Costa, Beatriz de Oliveira; Nahas, Ely

2012-01-01

The effect of inoculation of Aspergillus flavus , Fusarium verticillioides , and Penicillium sp. in Dystrophic Red Latosol (DRL) and Eutroferric Red Latosol (ERL) soils with or without glucose on the total carbohydrate content and the dehydrogenase and amylase activities was studied. The fungal growth and spore production in culture medium with and without glucose were also evaluated. A completely randomized design with factorial arrangement was used. The addition of glucose in the culture medium increased the growth rate of A. flavus and Penicillium sp. but not of F. verticillioides . The number of spores increased 1.2 for F. verticillioides and 8.2 times for A. flavus in the medium with glucose, but was reduced 3.5 times for Penicillium sp. The total carbohydrates contents reduced significantly according to first and second degree equations. The consumption of total carbohydrates by A. flavus and Penicillium sp. was higher than the control or soil inoculated with F. verticillioides . The addition of glucose to soils benefited the use of carbohydrates, probably due to the stimulation of fungal growth. Dehydrogenase activity increased between 1.5 to 1.8 times ( p <0.05) in soils with glucose and inoculated with the fungi (except F. verticillioides ), in relation to soil without glucose. Amylase activity increased 1.3 to 1.5 times due to the addition of glucose in the soil. Increased amylase activity was observed in the DRL soil with glucose and inoculated with A. flavus and Penicillium sp. when compared to control. PMID:24031836

An assessment of chemical contaminants in sediments from the St. Thomas East End Reserves, St. Thomas, USVI.

PubMed

Pait, Anthony S; Hartwell, S Ian; Mason, Andrew L; Warner, Robert A; Jeffrey, Christopher F G; Hoffman, Anne M; Apeti, Dennis A; Pittman, Simon J

2014-08-01

The St. Thomas East End Reserves or STEER is located on the southeastern end of the island of St. Thomas, USVI. The STEER contains extensive mangroves and seagrass beds, along with coral reefs, lagoons, and cays. Within the watershed, however, are a large active landfill, numerous marinas, resorts, various commercial activities, an EPA Superfund Site, and residential areas, all of which have the potential to contribute pollutants to the STEER. As part of a project to develop an integrated assessment for the STEER, 185 chemical contaminants were analyzed in sediments from 24 sites. Higher levels of chemical contaminants were found in Mangrove Lagoon and Benner Bay in the western portion of the study area. The concentrations of polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethane (DDT), zinc, copper, lead, and mercury were above a NOAA Effects Range-Low (ERL) sediment quality guideline at one or more sites, indicating impacts may be present in more sensitive species or life stages. Copper at one site in Benner Bay was above a NOAA Effects Range-Median (ERM) guideline indicating effects on benthic organisms were likely. The antifoulant boat hull ingredient tributyltin (TBT) was found at the third highest concentration in the history of NOAA's National Status and Trends (NS&T) Program, which monitors the nation's coastal and estuarine waters for chemical contaminants and bioeffects. The results from this project will provide resource managers with key information needed to make effective decisions affecting coral reef ecosystem health and gauge the efficacy of restoration activities.

2000-2002 Sultandağı-Afyon Earthquake Activity in Western Anatolia, Turkey

NASA Astrophysics Data System (ADS)

Kalafat, D.

2016-12-01

Western Anatolia is one of the seismically active region in Turkey. The high seismic activity is a result of the complex tectonic deformation of the Anatolian plate which has been dominated by the N-S extensional tectonic regime in the western edge. This extensional tectonic regime is partially maintained by a relative movement of the African-Arabian plates to north, average 2.5 cm per year. In western Turkey, relatively 3 major earthquakes (Mw≥6.0) were identified on the Sultandağı Fault zone (Afyon-Akşehir Graben) between years of 2000-2002. First event occurred at the year of 2000 (Eber-Sultandagi Earthquake, Mw=6.0) , and both events were occurred at February 3, 2002 Sultandağı (Mw=6.5) and Cay-Sultandagi (Mw=6.0). In this study, mentioned local earthquake activity, have been investigated to understand their nature and relation of the regional seismic activity and tectonic deformation on the Sultandağı Fault Zone (Afyon-Akşehir Graben) in western Anatolia. At first, we analyzed the distribution of mainshock and aftershocks of the two earthquakes which occurred in February 3, 2002 in the region. Fault mechanism solutions of the selected earthquakes and detailed stress regime analyses performed for the mainshock and aftershock sequences of two earthquakes. In regard with mentioned earthquakes, the identified surface ruptures have been investigated by detailed geological field study in the region. Also source mechanism solutions of the selected 17 regional earthquakes between years of 2000 and 2009 years in the region provided to understand the relation of the Sultandagi earthquakes sequences and regional seismic activity. Regional and local seismic investigations shows that, consecutive seismic activity is a result of the disturbance of stress balance in the region which has been triggered by sequentially occuring of earthquakes and triggering in short interval in years of 2000-2002. Also all seismic source studies approved that extensional deformation and normal faulting is dominant in the region. This study was supported by the Department of Science Fellowship and Grant programs (2014-2219) of TUBITAK (The Scientific and Technological Research Council of Turkey) and by Massachusetts Institute of Technology (MIT) The Earth Resources Laboratory (ERL).

Heavy Metals Contamination in Coastal Sediments of Karachi, Pakistan

NASA Astrophysics Data System (ADS)

Siddique, A.; Mumtaz, M.; Zaigham, N. A.; Mallick, K. A.; Saied, S.; Khwaja, H. A.

2008-12-01

Toxic compounds such as heavy metals exert chronic and lethal effects in animals, plants, and human health. With the rapid industrialization, urbanization, and economic development in Karachi, heavy metals are continuing to be introduced to estuarine and coastal environment through rivers, runoff and land-based point sources. Pollution in the Karachi coastal region (167 km long) is mainly attributed to Lyari and Malir Rivers flowing through the city of Karachi. Both rivers are served by various channels of domestic and industrial wastes carrying more than 300 million gallons per day untreated effluent of 6000 industries and ultimately drain into the beaches of Arabian Sea. Concentrations of selected heavy metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in surface sediments from eighty-eight sites in Karachi coastal region were studied in order to understand metal contamination due to industrialization, urbanization, and economic development in Karachi. Sediment samples were collected in 2005 and 2006. We have found that heavy metal concentrations in surface sediments varied from 0.006 to 24.3 ug/g for Cd, 5.1 to 95 ug/g for Co, 2.9 to 571 ug/g for Cr, 6.9 to 272 ug/g for Cu, 0.55 to 6.5% for Fe, 1.2 to 318 ug/g for Mn, 7.5 to 75 ug/g for Ni, 6.3 to 121 ug/g for Pb, and 3.3 to 389 ug/g for Zn. Enrichment factors (EFs) were calculated to assess whether the concentrations observed represent background or contaminated levels. The highest levels of metals were found to be at the confluence of the Lyari and Malir River streams at the Arabian Sea, indicating the impact of the effluents of the highly urbanized and industrialized city of Karachi. Furthermore, this study assessed heavy metal toxicity risk with the application of Sediment Quality Guideline (SQG) indices (effect range low/effect range median values, ERL/ERM). Results indicated that the potential toxicity of marine environment can cause adverse biological effects to the biota directly and the human health indirectly through food web chain.

Seasonal variations and relationships between environmental parameters and heavy metal concentrations in tissues of Crassostrea species and in its ambience from the tropical estuaries.

PubMed

Shenai-Tirodkar, Prachi; Gauns, Mangesh; Kumar, Girish; Ansari, Zakir

2018-05-15

This study aimed to evaluate the relationship between physicochemical parameters and heavy metal (Cu, Ni, Pb, and Cd) concentrations from sediment, seawater, and its accumulation in tissues of oyster species (Crassostrea madrasensis and C. gryphoides) from the three sites (Chicalim Bay (CB), Nerul Creek (NC), Chapora Bay (ChB)) along the Goa coast (India). Results showed enrichment of Cu and Ni in sediment exceeding the effect range low (ERL) level. The higher concentrations of Cu and Ni in sediments and in suspended particulate matter (SPM) from all the study sites are indicative of severe contamination of estuarine and associated habitats. Moreover, particulate Ni (at all the sites), Cu (at NC and ChB), Pb (at NC), and Cd (at CB and NC) concentrations were recorded more than its total loadings in surface sediment. Concentration of Cu and Cd in oyster tissue was several folds higher than its concentration in ambience. Further, this study showed that the levels of metal in oysters and their ambient environment were higher during the monsoon season. Hence, the consumption of oysters needs to be considered carefully with respect to the health hazards posed by the elevated levels of metal contaminants in certain seasons. The present study concludes that metals associated with the particulate matter in water column are the main source of metal accumulation in oyster. It is also suggested that concentration of metal pollutants in coastal and estuarine water bodies should be monitored regularly to ensure the acceptable limits of metal concentrations.

Future Synchrotron Light Sources Based on Ultimate Storage Rings

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cai, Yunhai; /SLAC

2012-04-09

The main purpose of this talk is to describe how far one might push the state of the art in storage ring design. The talk will start with an overview of the latest developments and advances in the design of synchrotron light sources based on the concept of an 'ultimate' storage ring. The review will establish how bright a ring based light source might be, where the frontier of technological challenges are, and what the limits of accelerator physics are. Emphasis will be given to possible improvements in accelerator design and developments in technology toward the goal of achieving anmore » ultimate storage ring. An ultimate storage ring (USR), defined as an electron ring-based light source having an emittance in both transverse planes at the diffraction limit for the range of X-ray wavelengths of interest for a scientific community, would provide very high brightness photons having high transverse coherence that would extend the capabilities of X-ray imaging and probe techniques beyond today's performance. It would be a cost-effective, high-coherence 4th generation light source, competitive with one based on energy recovery linac (ERL) technology, serving a large number of users studying material, chemical, and biological sciences. Furthermore, because of the experience accumulated over many decades of ring operation, it would have the great advantage of stability and reliability. In this paper we consider the design of an USR having 10-pm-rad emittance. It is a tremendous challenge to design a storage ring having such an extremely low emittance, a factor of 100 smaller than those in existing light sources, especially such that it has adequate dynamic aperture and beam lifetime. In many ultra-low emittance designs, the injection acceptances are not large enough for accumulation of the electron beam, necessitating on-axis injection where stored electron bunches are completely replaced with newly injected ones. Recently, starting with the MAX-IV 7-bend achromatic cell, we have made significant progress with the design of PEP-X, a USR that would inhabit the decommissioned PEP-II tunnel at SLAC. The enlargement of the dynamic aperture is largely a result of the cancellations of the 4th-order resonances in the 3rd-order achromats and the effective use of lattice optimization programs. In this paper, we will show those cancellations of the 4th-order resonances using an analytical approach based on the exponential Lie operators and the Poisson brackets. Wherever possible, our analytical results will be compared with their numerical counterparts. Using the derived formulae, we will construct 4th-order geometric achromats and use them as modules for the lattice of the PEP-X USR, noting that only geometric terms are canceled to the 4th order.« less

Measurement technology of RF interference current in high current system

NASA Astrophysics Data System (ADS)

Zhao, Zhihua; Li, Jianxuan; Zhang, Xiangming; Zhang, Lei

2018-06-01

Current probe is a detection method commonly used in electromagnetic compatibility. With the development of power electronics technology, the power level of power conversion devices is constantly increasing, and the power current of the electric energy conversion device in the electromagnetic launch system can reach 10kA. Current probe conventionally used in EMC (electromagnetic compatibility) detection cannot meet the test requirements on high current system due to the magnetic saturation problem. The conventional high current sensor is also not suitable for the RF (Radio Frequency) interference current measurement in high current power device due to the high noise level in the output of active amplifier. In this paper, a passive flexible current probe based on Rogowski coil and matching resistance is proposed that can withstand high current and has low noise level, to solve the measurement problems of interference current in high current power converter. And both differential mode and common mode current detection can be easily carried out with the proposed probe because of the probe's flexible structure.

Comprehensive Cardiovascular magnetic resonance of myocardial mechanics in mice using three-dimensional cine DENSE

PubMed Central

2011-01-01

Background Quantitative noninvasive imaging of myocardial mechanics in mice enables studies of the roles of individual genes in cardiac function. We sought to develop comprehensive three-dimensional methods for imaging myocardial mechanics in mice. Methods A 3D cine DENSE pulse sequence was implemented on a 7T small-bore scanner. The sequence used three-point phase cycling for artifact suppression and a stack-of-spirals k-space trajectory for efficient data acquisition. A semi-automatic 2D method was adapted for 3D image segmentation, and automated 3D methods to calculate strain, twist, and torsion were employed. A scan protocol that covered the majority of the left ventricle in a scan time of less than 25 minutes was developed, and seven healthy C57Bl/6 mice were studied. Results Using these methods, multiphase normal and shear strains were measured, as were myocardial twist and torsion. Peak end-systolic values for the normal strains at the mid-ventricular level were 0.29 ± 0.17, -0.13 ± 0.03, and -0.18 ± 0.14 for Err, Ecc, and Ell, respectively. Peak end-systolic values for the shear strains were 0.00 ± 0.08, 0.04 ± 0.12, and 0.03 ± 0.07 for Erc, Erl, and Ecl, respectively. The peak end-systolic normalized torsion was 5.6 ± 0.9°. Conclusions Using a 3D cine DENSE sequence tailored for cardiac imaging in mice at 7 T, a comprehensive assessment of 3D myocardial mechanics can be achieved with a scan time of less than 25 minutes and an image analysis time of approximately 1 hour. PMID:22208954

Detection of tetQ and ermF antibiotic resistance genes in Prevotella and Porphyromonas isolates from clinical specimens and resident microbiota of humans.

PubMed

Arzese, A R; Tomasetig, L; Botta, G A

2000-05-01

Gram-negative anaerobes belonging to the genera Fusobacterium, Prevotella and Porphyromonas were investigated for the presence of tetQ and ermF, which have been shown to be spread by conjugal elements. One hundred isolates from either sites of infection or various body sites in healthy subjects were studied. PCR was used to detect tetQ, and DNA-DNA hybridization studies on EcoRI chromosomal digests were undertaken to detect the presence of tetQ and ermF. Antibiotic sensitivity assays were performed on selected isolates to detect tetracycline, erythromycin and penicillin resistance. Twenty Fusobacterium isolates lacked tetQ, and were tetracycline sensitive. Twenty per cent of Prevotella spp. isolates both from clinical specimens and from healthy subjects were found to possess tetQ. Of 20 Porphyromonas isolates tested, one (Porphyromonas levii) from a case of bacterial vaginosis was shown to possess tetQ in the chromosome. The presence of tetQ was always associated with tetracycline resistance. Four isolates of Prevotella melaninogenica and one isolate of Prevotella were ermF-positive, although expression of erythromycin resistance was not consistently associated with detection of this gene. Antibiotic resistance phenotypes of Prevotella isolates were shown to be related to specific chromosomal restriction patterns by hybridization studies: tetracycline resistance and tetracycline/erythromycin resistance are conferred by Bacteroides tetracycline-resistant ERL elements, whereas the tetracycline/penicillin resistance phenotype could be due to spread of elements identified in Prevotella only. Tetracycline/erythromycin-resistant and tetracycline/erythromycin/penicillin-resistant P. melaninogenica isolates were found in this study. It appeared that the presence of tetQ and ermF in Bacteroides and Prevotella contributed to the persistence of antibiotic resistance isolates within the host and to potential spread to other organisms through conjugal elements.

Variability in response of lakes to climate change explained by surrounding watersheds

NASA Astrophysics Data System (ADS)

Råman Vinnå, Love; Wüest, Alfred; Bouffard, Damien

2017-04-01

The consequences of climate change for inland waters have been shown to vary extensively not only globally, but also on a sub-regional scale [O'Reilly et al., 2015, GRL]. Local factors affecting heating include morphology [Toffolon et al., 2014, LO], irradiance absorption [Williamson et al., 2015, SR], local weather conditions and onset of stratification [Zhong et al., 2016, LO] as well as ice conditions [Austin and Colman, 2007, GRL]. However, inland waters are often a complex web of rivers, streams, lakes and reservoirs. Thereby, to correctly assess and predict future changes in lakes/reservoirs due to climate change, it is important to consider the changes occurring in the surrounding watersheds and how they affect downstream waters. Here we evaluate the impact of climate change on rivers originating in the Swiss Alps (Aare and Rhône) and downstream located perialpine lakes (Lake Biel and Lake Geneva). We use regional predictions for air temperature increase and the subsequently expected shift in river discharge regime under the A1B emission scenario [Bey et al., 2011, CH2011; Federal Office for the Environment FOEN, 2012, CCHydro]. Focus is on predicting the changes in water temperature, particle content, stratification and deep water renewal rate using the 1D SIMSTRAT [Goudsmit et al., 2002, JGR] and Air2Stream [Toffolon and Piccolroaz, 2015, ERL] models. We show that the effect of tributaries on the reaction for downstream lakes to climate change are inversely proportional to the hydraulic residence time of the systems. We furthermore include known changes in anthropogenic thermal emissions, which in Lake Biel correspond to 2 decades of climate induced warming. Our results are put into context with future water utility plans in Lake Biel.

Characterization of heavy metal concentrations in the sediments of three freshwater rivers in Huludao City, Northeast China.

PubMed

Zheng, Na; Wang, Qichao; Liang, Zhongzhu; Zheng, Dongmei

2008-07-01

Wuli River, Cishan River, and Lianshan River are three freshwater rivers flowing through Huludao City, in a region of northeast China strongly affected by industrialization. Contamination assessment has never been conducted in a comprehensive way. For the first time, the contamination of three rivers impacted by different sources in the same city was compared. This work investigated the distribution and sources of Hg, Pb, Cd, Zn and Cu in the surface sediments of Wuli River, Cishan River, and Lianshan River, and assessed heavy metal toxicity risk with the application of two different sets of Sediment Quality Guideline (SQG) indices (effect range low/effect range median values, ERL/ERM; and threshold effect level/probable effect level, TEL/PEL). Furthermore, this study used a toxic unit approach to compare and gauge the individual and combined metal contamination for Hg, Pb, Cd, Zn and Cu. Results showed that Hg contamination in the sediments of Wuli River originated from previous sediment contamination of the chlor-alkali producing industry, and Pb, Cd, Zn and Cu contamination was mainly derived from atmospheric deposition and unknown small pollution sources. Heavy metal contamination to Cishan River sediments was mainly derived from Huludao Zinc Plant, while atmospheric deposition, sewage wastewater and unknown small pollution were the primary sources for Lianshan River. The potential acute toxicity in sediment of Wuli River may be primarily due to Hg contamination. Hg is the major toxicity contributor, accounting for 53.3-93.2%, 7.9-54.9% to total toxicity in Wuli River and Lianshan River, respectively, followed by Cd. In Cishan River, Cd is the major sediment toxicity contributor, however, accounting for 63.2-66.9% of total toxicity.

PREFACE: Fourth International Workshop on Inelastic Ion-Surface Collisions

NASA Astrophysics Data System (ADS)

Sigmund, Peter

1983-01-01

The Fourth International Workshop on Inelastic Ion-Surface Collisions was held at Hindsgavl Manor near Middelfart, Denmark from 21 to 24 September 1982, following previous workshops held in Murray Hill, New Jersey (1976), Hamilton, Ontario (1978) and Feldkirchen-Westerham, Bavaria (1980). Like in the previous meetings, the underlying idea was to gather a moderately small group of researchers to discuss fundamental physical and chemical problems in a number of areas that are related, but are normally represented at separate conferences focusing on different aspects. The area of inelastic ion-surface collisions has a wide diversity of applications ranging from surface analysis by particle impact through microelectronic and controlled thermonuclear fusion devices to biomolecule identification and solar wind effects in planetary space. There are strong links to surface science and atomic collision physics and their respective applications. The present series of workshops is an attempt to focus on fundamental problems common to all these areas and thus to provide a forum for fruitful interaction. At Middelfart, we were lucky to have an exceptional number of well-presented and stimulating summary talks covering a rather broad range of fundamental processes with the emphasis shifting back and forth between collisional and surface aspects. Moreover, there was a wealth of short contributions on current research, of which many were submitted to the present proceedings. Thanks to the speakers, an active audience, and considerate session chairmen, we had extensive and lively but friendly discussions in an always stimulating atmosphere. This volume contains 11 of 13 invited papers and 15 of the 30 contributions presented orally at the workshop. It should, like the proceedings of the previous workshops, give a balanced survey of the current status of the field, with a slight bias toward recent developments like those in the theory of charge states of sputtered atoms, and others. All papers have undergone a normal, and occasionally extensive, refereeing procedure. In the midst of the editing process, I received the news that one of the invited speakers, Morton Traum of Bell Laboratories, had died at age 41 on 1 December, 1982 in Stoughton, Wisconsin. Mort had delivered a superb talk on Desorption and Sputtering by Electronic Processes and had been one of the most active participants and perhaps the most broadly oriented one of the workshop. His intense curiosity and serene charm, combined with a solid background in all parts of surface science, contributed stimulating ideas to most of the topics discussed. In preparing the workshop, I got much useful advice and constructive criticism from the members of the international committee. The assistance of the members of the local committee, Nils Andersen, Flemming Besenbacher, Jens Nørskov and Jens Onsgaard, as well as Erling Hartmann, Tove Nyberg and my wife Pia was instrumental at various stages before, during and after the workshop. Generous funding was received from the Office of Naval Research, the Danish Natural Science Research Council, NORDITA, the Nordic Accelerator Committee, the Research Foundation of Odense University and the Danish Provincial Bank. It is a pleasure to acknowledge the professional service of the Hindsgavl Conference Center and the smooth cooperation with Dr N R Nilsson, executive editor of Physica Scripta.

Design and Development of a Prototype Permanent Magnet for Focusing/Defocusing for Electron-Ion Colliders

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wagner, Bob

Electron-ion colliders (EIC) have been identified as an ideal tool to study the next frontier of nuclear physics – the gluon force that holds the building blocks of matter together, and which is a fundamental component of the theory of Quantum Chromodynamics (QCD). Future electron-ion colliders under consideration can be based on the Energy Recovery Linac (ERL) architecture. The beam lines for this architecture could be built of the newly developed Non-Scaling Fixed Field Alternating Gradient (NS FFAG) structure, so that they can transfer multiple energies within the same aperture. This structure allows for the use of compact, economical quadupolemore » permanent magnets. In this SBIR, we propose to design and to manufacture prototype quadrupole permanent magnets of focusing/defocusing combined function for use in this beam line. For our SBIR project, we proposed to design and build the focusing/defocusing quadrupole with a gradient strength of 50 T/m and with a beam gap of 16mm. The proposed permanent magnet material is SmCo because of its higher radiation resistance as compared to NdBFe2. The use of permanent magnets will reduce the overall cost. For Phase I, we took a recent design by Dr. Dejan Trbojevic, and reran Tosca code on the design to optimize the iron yoke with respect to the thickness of SmCo. We then fabricated one prototype focusing/defocusing combined function quadruple and measured field quality dG/Go. Our plan for Phase II is that, based on our Phase I prototype experience, we shall improve the design and fabricate a production quadruple, and design and incorporate coils for skew dipoles and normal quadrupole correctors, etc. In addition, we shall fabricate enough quadrupoles for one cell. The development of quadrupole permanent magnets is of fundamental importance for there application in the future electron-ion colliders. This accelerator structure will also advance the development of muon accelerators and allow for the development of compact, simplified, less expensive proton accelerators which will promote their use in areas such as proton cancer therapy, and for high-power proton drivers for tritium and neutron production, waste transmutation, driving a sub-critical nuclear reactor to produce energy, cargo contain inspection, and radioisotope production. Proton cancer therapy has been identified as a particularly attractive and viable commercial application for the immediate future.« less

Snow on the Seafloor? Methods to Detect Carbohydrates in Deep-sea Sediments Impacted by the Deepwater Horizon Oil Spill

NASA Astrophysics Data System (ADS)

Lincoln, S. A.; Freeman, K. H.

2015-12-01

A significant portion of the oil released from the Macondo well after the 2010 Deepwater Horizon (DwH) explosion reached the seafloor (1,2). The transfer of buoyant hydrocarbons from the sea surface and subsurface plumes to depths >1500 m, however, is not well understood. A prominent role for sinking marine snow--small, composite particles composed largely of extracellular polymeric substances exuded by algae and bacteria--has been proposed. Snow particles, rich in carbohydrates, may have sorbed and physically entrained oil from the water column as they sank. Several lines of evidence support this scenario: abundant snow was observed 3-4 weeks after the oil spill (3); oil and dispersants can induce marine snow formation (4); and flocculent material covering deep-sea corals near the DwH site contained biomarkers consistent with Macondo oil (5). To investigate whether the chemically complex marine oil snow leaves a direct sedimentary record, we analyzed carbohydrates at high resolution (2 mm intervals) in sediment cores collected at 4 sites in the northern Gulf of Mexico in 2013 using a modified phenol-sulfuric acid spectrophotometric method. We detected a sharp subsurface peak in carbohydrate concentrations near the Macondo well; we interpret this peak as post-DwH marine snow. Coeval carbohydrate, polycyclic aromatic hydrocarbon, and hopane profiles suggest a clear link between marine snow and Macondo oil components, as documented in a 3-year time-series at one site, and enable preliminary conclusions about the delivery and fate of marine snow components in sediments. We also characterized carbohydrates near the wellhead using fluorescent lectin-binding analyses developed for applications in cell biology. Particle morphologies include collapse structures suggestive of a water column origin. Finally, we explore the extent to which polysaccharide residues detected with selective lectins can be used to determine the provenance of marine snow (e.g., bacterial v. algal). (1) Valentine et al., 2014. PNAS 111, 15906-15911. (2) Romero et al., 2015. PLOS One 10(5): e0128371 (3) Passow et al., ERL 7, 035301. (4) Passow, 2014. Deep-Sea Res. II, http://dx.doi. org/10.1016/j.dsr2.2014.10.001i (5) White et al., 2012. PNAS 109(50), 20303-20308.

[Distribution Characteristics, Sources and Pollution Assessment of Trace Elements in Surficial Sediments of the Coastal Wetlands, Northeastern Hainan Island].

PubMed

Zhang, Wei-kun; Gan, Hua-yang; Bi, Xiang-yang; Wang, Jia-sheng

2016-04-15

Totally 128 surficial sediments samples were collected from the coastal wetlands, northeastern Hainan Island and analyzed for their concentrations of 14 elements including Al2O3, Fe2O3, MnO, Cu, Ni, Sr, Zn, V, Pb, Cr, Zr, As, Cd and Hg, TOC and grain sizes. The mean concentrations of trace metals V, Cr, Ni, Cu, Zn, As, Pb, Cd and Hg were (40.13 +/- 32.65), (35.92 +/- 26.90), (13.03 +/- 11.46), (11.56 +/- 10.27)-, (48.75 +/- 27.00), (5.48 +/- 1.60), ( 18.70 +/- 8.66), (0.054 +/- 0.045 ), (0.050 +/- 0.050) microg x g(-1), respectively, which were much lower than those in Pearl River Estuary, Yangzi River Estuary, Bohai Bay, upper crust and average shale. The average concentrations of Sr and Zr were much higher, reaching up to (1253.60 +/- 1649.58) microg x g(-1) and (372.40 +/- 516.49) microg x g(-1), respectively. The spatial distribution patterns of Al2O3, Fe2O3, MnO, Cu, Ni, Zn, V, Pb, Cr, Cd and Hg concentrations were the same as each other except for those of As, Sr and Zr. Generally, relatively high concentrations of these elements only appeared in the Haikou Bay, Nandu estuary, Dongzhai Harbor, Qinglan Harbor and Xiaohai in study area. The factor analysis revealed that the trace elements Al2O3 Fe2O3, MnO, Cu, Ni, Zn, V, Pb, Cr and part of Hg were mainly originated from the rock material by natural weathering processes, while the Cd and a part of Hg were from the biological source controlled by TOC. As and part of MnO were influenced by anthropogenic source, especially by aquacultures. Zr and some MnO were derived from heavy minerals dominated by the coarse grain of sediments. In contrast to the ERL, ERM and the results of enrichment factors (EF) , the environment of study area was good in general and the degree of contamination by trace elements was low on the whole. However, there are still some places where anthropogenic input have caused serious enrichments of trace elements and the occasional adverse effect on benthic organism induced by Ni could probably occur in 22% areas of all the sampling stations.

The Relationship between the Current Waveform just before the Current Zero and the Interruption Ability in the High-speed VCB

NASA Astrophysics Data System (ADS)

Niwa, Yoshimitsu; Matsuzaki, Jun; Yokokura, Kunio

The high-speed vacuum circuit breaker, which forced the fault current to zero was investigated. The test circuit breaker consisted of a vacuum interrupter and a high frequency current source. The vacuum interrupter, which had the axial magnetic field electrode and the disk shape electrode, was tested. The arcing period of the high-speed vacuum circuit breaker is much shorter than that of conventional circuit breaker. The arc behavior of the test electrodes immediately after the contact separation was observed by a high-speed video camcorder. The relation between the current waveform just before the current zero and the interruption ability by varying the high frequency current source was investigated experimentally. The results demonstrate the interruption ability and the arc behavior of the high-speed vacuum circuit breaker. The high current interruption was made possible by the low current period just before the current zero, although the arcing time is short and the arc is concentrated.

High-voltage, high-current, solid-state closing switch

DOE Office of Scientific and Technical Information (OSTI.GOV)

Focia, Ronald Jeffrey

2017-08-22

A high-voltage, high-current, solid-state closing switch uses a field-effect transistor (e.g., a MOSFET) to trigger a high-voltage stack of thyristors. The switch can have a high hold-off voltage, high current carrying capacity, and high time-rate-of-change of current, di/dt. The fast closing switch can be used in pulsed power applications.

The Rogowski Coil Sensor in High Current Application: A Review

NASA Astrophysics Data System (ADS)

Nazmy Nanyan, Ayob; Isa, Muzamir; Hamid, Haziah Abdul; Nur Khairul Hafizi Rohani, Mohamad; Ismail, Baharuddin

2018-03-01

Rogowski coil is used for measuring the alternating current (AC) and high-speed current pulses. However, the technology makes the Rogowski coil (RC) come out with more improvement, modification and until today it’s still being studied for the new application. The Rogowski coil has a few advantages compared to the high frequency current transformer (HFCT). A brief review on the basic theory and the application of Rogowski coil as a current sensor measurement that been done by previous researchers are presented and discussed in this paper. Additionally, the review also focused on the capability of Rogowski coil for high current sensor measurement and their application for fault detection, over voltage current sensor, lightning current sensor and high impulse current detection. The experimental set up, techniques and measurement parameters in models also been discussed. Finally, a brief review on the performance analysis of current sensor measurement of Rogowski coil likes sensitivity, the maximum and current detection which could be used as a guideline to another researcher in order to develop an advanced RC as high current sensor in future is presented. This review reveal that the RC has a very good performance in high current sensor detection in term of sensitivity which is up to a few nanosecond, higher bandwidth, excellent in detection of high fault and also could measuring lightning current up to 400kA and has many advantages compare to conventional current transformer(CT).

40 CFR 761.30 - Authorizations.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Current-limiting fuses or other equivalent technology must be used to detect sustained high current faults... fuses or other equivalent technology to avoid PCB Transformer ruptures from sustained high current... protection, such as current-limiting fuses or other equivalent technology, to detect sustained high current...

Pulse-Width-Modulating Driver for Brushless dc Motor

NASA Technical Reports Server (NTRS)

Salomon, Phil M.

1991-01-01

High-current pulse-width-modulating driver for brushless dc motor features optical coupling of timing signals from low-current control circuitry to high-current motor-driving circuitry. Provides high electrical isolation of motor-power supply, helping to prevent fast, high-current motor-driving pulses from being coupled through power supplies into control circuitry, where they interfere with low-current control signals.

Test of bootstrap current models using high- β p EAST-demonstration plasmas on DIII-D

DOE PAGES

Ren, Qilong; Lao, Lang L.; Garofalo, Andrea M.; ...

2015-01-12

Magnetic measurements together with kinetic profile and motional Stark effect measurements are used in full kinetic equilibrium reconstructions to test the Sauter and NEO bootstrap current models in a DIII-D high-more » $${{\\beta}_{\\text{p}}}$$ EAST-demonstration experiment. This aims at developing on DIII-D a high bootstrap current scenario to be extended on EAST for a demonstration of true steady-state at high performance and uses EAST-similar operational conditions: plasma shape, plasma current, toroidal magnetic field, total heating power and current ramp-up rate. It is found that the large edge bootstrap current in these high-$${{\\beta}_{\\text{p}}}$$ plasmas allows the use of magnetic measurements to clearly distinguish the two bootstrap current models. In these high collisionality and high-$${{\\beta}_{\\text{p}}}$$ plasmas, the Sauter model overpredicts the peak of the edge current density by about 30%, while the first-principle kinetic NEO model is in close agreement with the edge current density of the reconstructed equilibrium. Furthermore, these results are consistent with recent work showing that the Sauter model largely overestimates the edge bootstrap current at high collisionality.« less

Evaluation of the Relationship Between Coral Damage and Tsunami Dynamics; Case Study: 2009 Samoa Tsunami

NASA Astrophysics Data System (ADS)

Dilmen, Derya I.; Titov, Vasily V.; Roe, Gerard H.

2015-12-01

On September 29, 2009, an Mw = 8.1 earthquake at 17:48 UTC in Tonga Trench generated a tsunami that caused heavy damage across Samoa, American Samoa, and Tonga islands. Tutuila island, which is located 250 km from the earthquake epicenter, experienced tsunami flooding and strong currents on the north and east coasts, causing 34 fatalities (out of 192 total deaths from this tsunami) and widespread structural and ecological damage. The surrounding coral reefs also suffered heavy damage. The damage was formally evaluated based on detailed surveys before and immediately after the tsunami. This setting thus provides a unique opportunity to evaluate the relationship between tsunami dynamics and coral damage. In this study, estimates of the maximum wave amplitudes and coastal inundation of the tsunami are obtained with the MOST model (T itov and S ynolakis, J. Waterway Port Coast Ocean Eng: pp 171, 1998; T itov and G onzalez, NOAA Tech. Memo. ERL PMEL 112:11, 1997), which is now the operational tsunami forecast tool used by the National Oceanic and Atmospheric Administration (NOAA). The earthquake source function was constrained using the real-time deep-ocean tsunami data from three DART® (Deep-ocean Assessment and Reporting for Tsunamis) systems in the far field, and by tide-gauge observations in the near field. We compare the simulated run-up with observations to evaluate the simulation performance. We present an overall synthesis of the tide-gauge data, survey results of the run-up, inundation measurements, and the datasets of coral damage around the island. These data are used to assess the overall accuracy of the model run-up prediction for Tutuila, and to evaluate the model accuracy over the coral reef environment during the tsunami event. Our primary findings are that: (1) MOST-simulated run-up correlates well with observed run-up for this event ( r = 0.8), it tends to underestimated amplitudes over coral reef environment around Tutuila (for 15 of 31 villages, run-up is underestimated by more than 10 %; in only 5 was run-up overestimated by more than 10 %), and (2) the locations where the model underestimates run-up also tend to have experienced heavy or very heavy coral damage (8 of the 15 villages), whereas well-estimated run-up locations characteristically experience low or very low damage (7 of 11 villages). These findings imply that a numerical model may overestimate the energy loss of the tsunami waves during their interaction with the coral reef. We plan future studies to quantify this energy loss and to explore what improvements can be made in simulations of tsunami run-up when simulating coastal environments with fringing coral reefs.

High current density cathode for electrorefining in molten electrolyte

DOEpatents

Li, Shelly X.

2010-06-29

A high current density cathode for electrorefining in a molten electrolyte for the continuous production and collection of loose dendritic or powdery deposits. The high current density cathode eliminates the requirement for mechanical scraping and electrochemical stripping of the deposits from the cathode in an anode/cathode module. The high current density cathode comprises a perforated electrical insulated material coating such that the current density is up to 3 A/cm.sup.2.

High altitude observations of Birkeland currents

NASA Technical Reports Server (NTRS)

Russell, C. T.

1977-01-01

Several models of field-aligned currents (Birkeland currents) in the magnetosphere are discussed, and high altitude observations of these currents, carried out with the aid of highly eccentric earth-orbiting spacecraft of the OGO and IMP series, are reviewed. The essential roles of Birkeland currents are identified: they relieve charge imbalances, transmit stresses, and lead to particle acceleration anomalous resistivity.

High speed, high current pulsed driver circuit

DOEpatents

Carlen, Christopher R.

2017-03-21

Various technologies presented herein relate to driving a LED such that the LED emits short duration pulses of light. This is accomplished by driving the LED with short duration, high amplitude current pulses. When the LED is driven by short duration, high amplitude current pulses, the LED emits light at a greater amplitude compared to when the LED is driven by continuous wave current.

High temperature current mirror amplifier

DOEpatents

Patterson, III, Raymond B.

1984-05-22

A high temperature current mirror amplifier having biasing means in the transdiode connection of the input transistor for producing a voltage to maintain the base-collector junction reversed-biased and a current means for maintaining a current through the biasing means at high temperatures so that the base-collector junction of the input transistor remained reversed-biased. For accuracy, a second current mirror is provided with a biasing means and current means on the input leg.

Science Requirements and Conceptual Design for a Polarized Medium Energy Electron-Ion Collider at Jlab

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abeyratne, S; Ahmed, S; Barber, D

2012-08-01

Researchers have envisioned an electron-ion collider with ion species up to heavy ions, high polarization of electrons and light ions, and a well-matched center-of-mass energy range as an ideal gluon microscope to explore new frontiers of nuclear science. In its most recent Long Range Plan, the Nuclear Science Advisory Committee (NSAC) of the US Department of Energy and the National Science Foundation endorsed such a collider in the form of a 'half-recommendation.' As a response to this science need, Jefferson Lab and its user community have been engaged in feasibility studies of a medium energy polarized electron-ion collider (MEIC), cost-effectivelymore » utilizing Jefferson Lab's already existing Continuous Electron Beam Accelerator Facility (CEBAF). In close collaboration, this community of nuclear physicists and accelerator scientists has rigorously explored the science case and design concept for this envisioned grand instrument of science. An electron-ion collider embodies the vision of reaching the next frontier in Quantum Chromodynamics - understanding the behavior of hadrons as complex bound states of quarks and gluons. Whereas the 12 GeV Upgrade of CEBAF will map the valence-quark components of the nucleon and nuclear wave functions in detail, an electron-ion collider will determine the largely unknown role sea quarks play and for the first time study the glue that binds all atomic nuclei. The MEIC will allow nuclear scientists to map the spin and spatial structure of quarks and gluons in nucleons, to discover the collective effects of gluons in nuclei, and to understand the emergence of hadrons from quarks and gluons. The proposed electron-ion collider at Jefferson Lab will collide a highly polarized electron beam originating from the CEBAF recirculating superconducting radiofrequency (SRF) linear accelerator (linac) with highly polarized light-ion beams or unpolarized light- to heavy-ion beams from a new ion accelerator and storage complex. Since the very beginning, the design studies at Jefferson Lab have focused on achieving high collider performance, particularly ultrahigh luminosities up to 10{sup 34} cm{sup -2}s{sup -1} per detector with large acceptance, while maintaining high polarization for both the electron and light-ion beams. These are the two key performance requirements of a future electron-ion collider facility as articulated by the NSAC Long Range Plan. In MEIC, a new ion complex is designed specifically to deliver ion beams that match the high bunch repetition and highly polarized electron beam from CEBAF. During the last two years, both development of the science case and optimization of the machine design point toward a medium-energy electron-ion collider as the topmost goal for Jefferson Lab. The MEIC, with relatively compact collider rings, can deliver a luminosity above 10{sup 34} cm{sup -2}s{sup -1} at a center-of-mass energy up to 65 GeV. It offers an electron energy up to 11 GeV, a proton energy up to 100 GeV, and corresponding energies per nucleon for heavy ions with the same magnetic rigidity. This design choice balances the scope of the science program, collider capabilities, accelerator technology innovation, and total project cost. An energy upgrade could be implemented in the future by adding two large collider rings housed in another large tunnel to push the center-of-mass energy up to or exceeding 140 GeV. After careful consideration of an alternative electron energy recovery linac on ion storage ring approach, a ring-ring collider scenario at high bunch repetition frequency was found to offer fully competitive performance while eliminating the uncertainties of challenging R&D on ampere-class polarized electron sources and many-pass energy-recovery linacs (ERLs). The essential new elements of an MEIC facility at Jefferson Lab are an electron storage ring and an entirely new, modern ion acceleration and storage complex. For the high-current electron collider ring, the upgraded 12 GeV CEBAF SRF linac will serve as a full-energy injector, and, if needed, provide top-off refilling. The CEBAF fixed-target nuclear physics program can be simultaneously operated since the filling time of the electron ring is very short. The ion complex for MEIC consists of sources for polarized light ions and unpolarized light to heavy ions, an SRF ion linac with proton energy up to 280 MeV, a 3 GeV prebooster synchrotron, a large booster synchrotron for proton energy up to 20 GeV, and a medium-energy collider ring with energy up to 100 GeV. The ion complex can accelerate other species of ions with corresponding energies at each accelerating stage. There are three collision points planned for MEIC. Two of them are for collisions with medium-energy ions; the third is for low energy ion beams stored in a dedicated low-energy compact storage ring, as a possible follow-on project.« less

High temperature superconducting fault current limiter

DOEpatents

Hull, J.R.

1997-02-04

A fault current limiter for an electrical circuit is disclosed. The fault current limiter includes a high temperature superconductor in the electrical circuit. The high temperature superconductor is cooled below its critical temperature to maintain the superconducting electrical properties during operation as the fault current limiter. 15 figs.

Hybrid high direct current circuit interrupter

DOEpatents

Rockot, Joseph H.; Mikesell, Harvey E.; Jha, Kamal N.

1998-01-01

A device and a method for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens.

High temperature superconducting fault current limiter

DOEpatents

Hull, John R.

1997-01-01

A fault current limiter (10) for an electrical circuit (14). The fault current limiter (10) includes a high temperature superconductor (12) in the electrical circuit (14). The high temperature superconductor (12) is cooled below its critical temperature to maintain the superconducting electrical properties during operation as the fault current limiter (10).

High temperature current mirror amplifier

DOEpatents

Patterson, R.B. III.

1984-05-22

Disclosed is a high temperature current mirror amplifier having biasing means in the transdiode connection of the input transistor for producing a voltage to maintain the base-collector junction reversed-biased and a current means for maintaining a current through the biasing means at high temperatures so that the base-collector junction of the input transistor remained reversed-biased. For accuracy, a second current mirror is provided with a biasing means and current means on the input leg. 2 figs.

Microcracking of Materials for Space

NASA Technical Reports Server (NTRS)

Brown, Timothy L.

1998-01-01

The effect of thermal-cycling-induced microcracking in fiber-reinforced polymer matrix composites is studied. Specific attention is focused on microcrack density as a function of the number of thermal cycles, and the effect of microcracking on the dimensional stability of composite materials. Changes in laminate coefficient of thermal expansion (CTE) and laminate stiffness are of primary concern. Included in the study are materials containing four different Thornel fiber types: a PAN-based T50 fiber and three pitch-based fibers, P55, P75, and P120. The fiber stiffnesses range from 55 Msi to 120 Msi. The fiber CTE's range from -0.50 x 1O(exp -6)/degrees F to -0.80 x 10(exp -6)/degrees F. Also included are three matrix types: Fiberite's 934 epoxy, Amoco's ERL1962 toughened epoxy, and YLA's RS3 cyanate ester. The lamination sequences of the materials considered include a cross-ply configuration, [0/90](sub 2s), and two quasi-isotropic configurations, [0/+45/-45/90](sub s), and [0/+45/90/-45](sub s). The layer thickness of the materials range from a nominal 0.001 in. to 0.005 in. In addition to the variety of materials considered, three different thermal cycling temperature ranges are considered. These temperature ranges are +/-250 degrees F, +/-l5O degrees F, and +/-50 degrees F. The combination of these material and geometric parameters and temperature ranges, combined with thermal cycling to thousands of cycles, makes this one of the most comprehensive studies of thermal-cycling-induced microcracking to date. Experimental comparisons are presented by examining the effect of layer thickness, fiber type, matrix type, and thermal cycling temperature range on microcracking and its influence on the laminates. Results regarding layer thickness effects indicate that thin-layer laminates microcrack more severely than identical laminates with thick layers. For some specimens in this study, the number of microcracks in thin-layer specimens exceeds that in thick-layer specimens by more than a factor of two. Despite the higher number of microcracks in the thin-layer specimens, small changes in CTE after thousands of cycles indicate that the thin-layer specimens are relatively unaffected by the presence of these cracks compared to the thick-layer specimens. Results regarding fiber type indicate that the number of microcracks and the change in CTE after thousands of cycles in the specimens containing PAN-based fibers are less than in the specimens containing comparable stiffness pitch-based fibers. Results for specimens containing the different pitch-based fibers indicate that after thousands of cycles, the number of microcracks in the specimens does not depend on the modulus or CTE of the fiber. The change in laminate CTE does, however, depend highly on the stiffness and CTE of the fiber. Fibers with higher stiffness and more negative CTE exhibit the lowest change in laminate CTE as a result of thermal cycling. The overall CTE of these specimens is, however, more negative as a result of the more negative CTE of the fiber. Results regarding matrix type based on the +/-250 degree F temperature range indicate that the RS3 cyanate ester resin system exhibits the greatest resistance to microcracking and the least change in CTE, particularly for cycles numbering 3000 and less. Extrapolations to higher numbers of cycles indicate, however, that the margin of increased performance is expected to decrease with additional thermal cycling. Results regarding thermal cycling temperature range depend on the matrix type considered and the layer thickness of the specimens. For the ERL1962 resin system, microcrack saturation is expected to occur in all specimens, regardless of the temperature range to which the specimens are exposed. By contrast, the RS3 resin system demonstrates a threshold effect such that cycled to less severe temperature ranges, microcracking does not occur. For the RS3 specimens with 0.005 in. layer thickness, no microcracking or changes in CTE are observed in specimens cycled between +/-150 degree F or +/- 50 degree F. For the RS3 specimens with 0.002 in. layer thickness, no microcracking or changes in CTE are observed in specimens cycled between +/-50 degree F. Results regarding laminate stiffness indicate negligible change in laminate stiffness due to thermal cycling for the materials and geometries considered in this investigation. The study includes X-ray examination of the specimens, showing that cracks observed at the edge of the specimens penetrate the entire width of the specimen. Glass transition temperatures of the specimens are measured, showing that resin chemistry is not altered as a result of thermal cycling. Results are also presented based on a one-dimensional shear lag analysis developed in the literature. The analysis requires material property information that is difficult to obtain experimentally. Using limited data from the present investigation, material properties associated with the analysis are modified to obtain reasonable agreement with measured microcrack densities. Based on these derived material properties, the analysis generally overpredicts the change in laminate CTE. Predicted changes in laminate stiffness show reasonable correlation with experimentally measured values.

Stable superconducting magnet. [high current levels below critical temperature

NASA Technical Reports Server (NTRS)

Boom, R. W. (Inventor)

1967-01-01

Operation of a superconducting magnet is considered. A method is described for; (1) obtaining a relatively high current in a superconducting magnet positioned in a bath of a gas refrigerant; (2) operating a superconducting magnet at a relatively high current level without training; and (3) operating a superconducting magnet containing a plurality of turns of a niobium zirconium wire at a relatively high current level without training.

Comparison between Phase-Shift Full-Bridge Converters with Noncoupled and Coupled Current-Doubler Rectifier

PubMed Central

Tsai, Cheng-Tao; Tseng, Sheng-Yu

2013-01-01

This paper presents comparison between phase-shift full-bridge converters with noncoupled and coupled current-doubler rectifier. In high current capability and high step-down voltage conversion, a phase-shift full-bridge converter with a conventional current-doubler rectifier has the common limitations of extremely low duty ratio and high component stresses. To overcome these limitations, a phase-shift full-bridge converter with a noncoupled current-doubler rectifier (NCDR) or a coupled current-doubler rectifier (CCDR) is, respectively, proposed and implemented. In this study, performance analysis and efficiency obtained from a 500 W phase-shift full-bridge converter with two improved current-doubler rectifiers are presented and compared. From their prototypes, experimental results have verified that the phase-shift full-bridge converter with NCDR has optimal duty ratio, lower component stresses, and output current ripple. In component count and efficiency comparison, CCDR has fewer components and higher efficiency at full load condition. For small size and high efficiency requirements, CCDR is relatively suitable for high step-down voltage and high efficiency applications. PMID:24381521

Comparison between phase-shift full-bridge converters with noncoupled and coupled current-doubler rectifier.

PubMed

Tsai, Cheng-Tao; Su, Jye-Chau; Tseng, Sheng-Yu

2013-01-01

This paper presents comparison between phase-shift full-bridge converters with noncoupled and coupled current-doubler rectifier. In high current capability and high step-down voltage conversion, a phase-shift full-bridge converter with a conventional current-doubler rectifier has the common limitations of extremely low duty ratio and high component stresses. To overcome these limitations, a phase-shift full-bridge converter with a noncoupled current-doubler rectifier (NCDR) or a coupled current-doubler rectifier (CCDR) is, respectively, proposed and implemented. In this study, performance analysis and efficiency obtained from a 500 W phase-shift full-bridge converter with two improved current-doubler rectifiers are presented and compared. From their prototypes, experimental results have verified that the phase-shift full-bridge converter with NCDR has optimal duty ratio, lower component stresses, and output current ripple. In component count and efficiency comparison, CCDR has fewer components and higher efficiency at full load condition. For small size and high efficiency requirements, CCDR is relatively suitable for high step-down voltage and high efficiency applications.

Hybrid high direct current circuit interrupter

DOEpatents

Rockot, J.H.; Mikesell, H.E.; Jha, K.N.

1998-08-11

A device and a method are disclosed for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens. 7 figs.

Graphene electron cannon: High-current edge emission from aligned graphene sheets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Jianlong; Li, Nannan; Guo, Jing

2014-01-13

High-current field emitters are made by graphene paper consist of aligned graphene sheets. Field emission luminance pattern shows that their electron beams can be controlled by rolling the graphene paper from sheet to cylinder. These specific electron beams would be useful to vacuum devices and electron beam lithograph. To get high-current emission, the graphene paper is rolled to array and form graphene cannon. Due to aligned emission array, graphene cannon have high emission current. Besides high emission current, the graphene cannon is also tolerable with excellent emission stability. With good field emission properties, these aligned graphene emitters bring application insight.

Exercise for vasomotor menopausal symptoms.

PubMed

Daley, A; MacArthur, C; Mutrie, N; Stokes-Lampard, H

2007-10-17

Evidence suggests that a high proportion of perimenopausal and early postmenopausal women will experience some menopause symptoms, hot flushes being the most common. The effects caused by falling levels of estrogen may be alleviated by hormone replacement therapy (HRT) but there has been a marked global decline in the prescription and use of HRT due to concerns about the risks and benefits of HRT; consequently many women are now seeking alternatives. As large numbers of women are choosing not to take HRT, it is increasingly important to identify evidence based lifestyle modifications, which can have a positive effect on menopausal symptoms. To examine the effectiveness of any type of exercise intervention in the management of vasomotor menopausal symptoms (hot flushes and night sweats) in perimenopausal and postmenopausal women. Searches of the following electronic bibliographic databases were performed to identify randomised controlled trials: The Cochrane Library (CENTRAL) (Wiley Internet interface) 2006 Issue 2, MEDLINE (Ovid) 1966-May week 4 2006, EMBASE (Ovid) 1980-week 21 2006, PsycINFO (Ovid) 1967-May week 5 2006, Science Citation Index and Social Science Citation Index (Web of Science) 1900-June 2006 and 1956-June 2006 respectively, CINAHL (Ovid) 1982-May week 4 2006, SPORT Discus (ERL WebSPIRS) 1830-2006/04. Randomised controlled trials (RCTs) in which any type of exercise intervention was compared to other treatments or no treatment in the management of menopausal vasomotor symptoms in symptomatic perimenopausal and postmenopausal women. Nineteen reports were deemed potentially eligible, but of these only one met the inclusion criteria and three authors independently extracted data from this trial. Only one very small trial, which compared exercise with HRT, was available for inclusion in this review. Based on within-group analyses the study authors concluded that both interventions were effective in reducing vasomotor symptoms. Between-group trial analyses conducted by reviewers showed that the HRT group experienced significantly fewer hot flushes compared to the exercise group at follow-up. Only one very small trial involving symptomatic women has assessed the effectiveness of exercise in the management of vasomotor menopausal symptoms. Exercise was not as effective as HRT in this trial. We found no evidence from randomised controlled trials on whether exercise is an effective treatment relative to other interventions or no intervention in reducing hot flushes and or night sweats in symptomatic women. No conclusions regarding the effectiveness of exercise as a treatment for vasomotor menopausal symptoms could be made due to a lack of trials.

Superconducting dc Current Limiting Vacuum Circuit Breaker

NASA Astrophysics Data System (ADS)

Alferov, D. F.; Akhmetgareev, M. R.; Budovskii, A. I.; Bunin, R. A.; Voloshin, I. F.; Degtyarenko, P. N.; Yevsin, D. V.; Ivanov, V. P.; Sidorov, V. A.; Fisher, L. M.; Tshai, E. V.

Acircuitofadc superconductingfault current limiter witha direct current circuit-breaker fora nominal current 300A is proposed. It includes the 2G high temperature superconducting (HTS) tapes and the high-speed dc vacuum circuit breaker.Thetestresultsof current-limitingcapacityandrecoverytimeof superconductivityafter currentfaultatvoltage upto3 kV are presented.

A High Peak Current Source for the CEBAF Injector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yunn, Byung; Sinclair, Charles; Krafft, Geoffrey

1992-07-01

The CEBAF accelerator can drive high power IR and UV FELs, if a high peak current source is added to the existing front end. We present a design for a high peak current injector which is compatible with simultaneous operation of the accelerator for cw nulear physics (NP) beam. The high peak current injector provides 60 A peak current in 2 psec long bunches carrying 120 pC charge at 7.485 MHz. At 10 MeV that beam is combined with 5 MeV NP beam (0.13pC, 2 psec long bunches at 1497 MHz) in an energy combination chicane for simultaneous acceleration inmore » the injector linac. The modifications to the low-energy NP transport are described. Results of optical and beam dynamics calculations for both high peak current and NP beams in combined operation are presented.« less

High current plasma electron emitter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiksel, G.; Almagri, A.F.; Craig, D.

1995-07-01

A high current plasma electron emitter based on a miniature plasma source has been developed. The emitting plasma is created by a pulsed high current gas discharge. The electron emission current is 1 kA at 300 V at the pulse duration of 10 ms. The prototype injector described in this paper will be used for a 20 kA electrostatic current injection experiment in the Madison Symmetric Torus (MST) reversed-field pinch. The source will be replicated in order to attain this total current requirement. The source has a simple design and has proven very reliable in operation. A high emission current,more » small size (3.7 cm in diameter), and low impurity generation make the source suitable for a variety of fusion and technological applications.« less

THEMIS two‐point measurements of the cross‐tail current density: A thick bifurcated current sheet in the near‐Earth plasma sheet

PubMed Central

2015-01-01

Abstract The basic properties of the near‐Earth current sheet from 8 RE to 12 RE were determined based on Time History of Events and Macroscale Interactions during Substorms (THEMIS) observations from 2007 to 2013. Ampere's law was used to estimate the current density when the locations of two spacecraft were suitable for the calculation. A total of 3838 current density observations were obtained to study the vertical profile. For typical solar wind conditions, the current density near (off) the central plane of the current sheet ranged from 1 to 2 nA/m2 (1 to 8 nA/m2). All the high current densities appeared off the central plane of the current sheet, indicating the formation of a bifurcated current sheet structure when the current density increased above 2 nA/m2. The median profile also showed a bifurcated structure, in which the half thickness was about 3 RE. The distance between the peak of the current density and the central plane of the current sheet was 0.5 to 1 RE. High current densities above 4 nA/m2 were observed in some cases that occurred preferentially during substorms, but they also occurred in quiet times. In contrast to the commonly accepted picture, these high current densities can form without a high solar wind dynamic pressure. In addition, these high current densities can appear in two magnetic configurations: tail‐like and dipolar structures. At least two mechanisms, magnetic flux depletion and new current system formation during the expansion phase, other than plasma sheet compression are responsible for the formation of the bifurcated current sheets. PMID:27722039

Magnetic field configurations on thruster performance in accordance with ion beam characteristics in cylindrical Hall thruster plasmas

NASA Astrophysics Data System (ADS)

Kim, Holak; Choe, Wonho; Lim, Youbong; Lee, Seunghun; Park, Sanghoo

2017-03-01

Magnetic field configuration is critical in Hall thrusters for achieving high performance, particularly in thrust, specific impulse, efficiency, etc. Ion beam features are also significantly influenced by magnetic field configurations. In two typical magnetic field configurations (i.e., co-current and counter-current configurations) of a cylindrical Hall thruster, ion beam characteristics are compared in relation to multiply charged ions. Our study shows that the co-current configuration brings about high ion current (or low electron current), high ionization rate, and small plume angle that lead to high thruster performance.

An ecological risk investigation of marine sediment from the northern Mediterranean coasts (Aegean Sea) using multiple methods of pollution determination.

PubMed

Tunca, Evren; Aydın, Mehmet; Şahin, Ülkü Alver

2018-03-01

The aim of this study is an assessment of metal pollution levels in Aegean Sea sediment. Sediment samples collected from 7 different locations (Yeniköy, Edremit, Ayvalık, Dikili, Aliağa, Hekimadası, and Ildır) along the northern Mediterranean region of Turkey were investigated for 11 elements (Cu, Fe, Zn, V, Cd, Ni, As, Pb, Mn, Co, and Cr). Graphite furnace atomic absorption spectrophotometry (GFAAS) and flame atomic absorption spectrophotometry (FAAS) were used for elemental analysis. The findings were evaluated with sediment assessment methods by taking two different values as a reference and then investigating the adverse biological effects of elemental profiles on living organisms. Pb, Mn, As, Cd, and Cr concentrations were within a moderate to significant range in terms of contamination factor [Formula: see text]), albeit varying according to reference and location. The most problematic region and elements regarding the enrichment factor (EF) was Ayvalık and As, Ni, Cu, Pb, Co, and Cd. However, according to the EF, the anthropogenic effect was not at an alarming level. This was further supported by the results of the geoaccumulation index (Igeo). The findings of the modified degree of contamination (mC d ) and the pollution load index (PLI) suggested that the accumulation was greatest in Ayvalık, and the least in Hekimadası and Ildır. The location with the highest elemental total toxic unit (ΣTU) was Edremit. The effect of the existing element profile on organisms was 21% in this location when the mean effect range-median quotient (m-ERM-q) was considered. As and Ni concentrations in all stations were found to be higher than threshold effect level (TEL) and Effect Range Low (ERL). Ni levels in Edremit exceeded the probable effect level (PEL) and Effect Range Median (ERM). Toxic unit (TU) values of these two elements in all stations ranged from 59.30 to 80.43%.

Development of new impact functions for global risk caused by climate change

NASA Astrophysics Data System (ADS)

Miyazaki, C.

2014-12-01

The purpose of our study is to identify and quantify global-scale risks which can be caused by future climate change. In particular, we focus on the global-scale risks which have critical impacts to human environments. Use of impact functions is one of the common way to quantify global-scale risks. Output of impact function is climate impacts (e.g. economic damage by temperature increasing) and input can be global temperature increasing and/or socioeconomic condition (e.g. GDP). As the first step of study, we referred to AR5 WG II report (AR5, hereafter) and comprehensive inventories of climate change risks developed by Strategic R&D Area Project of the Environment Research and Technology Development Fund (ICA-RUS project). Then we extracted information which can be used to develop impact function from them. By following SPM/AR5, we focused on 11 sectors and extracted quantitative description on climate impacts from the AR5 and paper/reports cited in AR5. As a result, we identified about 40 risk items to focus as global-scale risks by climate change. Using the collected information, we tentatively made impact function on sea level rise and so on. In addition, we also extracted the impact functions used in Integrated Assessment Models (IAMs). The literature survey on IAM suggested the risk items considered in IAMs are limited. For instance, although FUND model provides detailed impact functions compared with most of other IAMs, its impact functions deal with only several sectors (e.g. agriculture, forestry, biodiversity, sea level rise, human health, energy demand and water resources). The survey on impact functions in IAMs also suggested impact function for abrupt climate change (so-called Tipping Element) is premature. Moreover, as example for quantifying health risk by our calculation, we also present the result on global-scale projection of the health burden attributable to childhood undernutrition (Ishida et al., 2014, ERL).

Magnetic dipole discharges. II. Cathode and anode spot discharges and probe diagnostics

NASA Astrophysics Data System (ADS)

Stenzel, R. L.; Urrutia, J. M.; Ionita, C.; Schrittwieser, R.

2013-08-01

The high current regime of a magnetron-type discharge has been investigated. The discharge uses a permanent magnet as a cold cathode which emits secondary electrons while the chamber wall or a grounded electrode serves as the anode. As the discharge voltage is increased, the magnet develops cathode spots, which are short duration arcs that provide copious electrons to increase the discharge current dramatically. Short (1 μs), high current (200 A) and high voltage (750 V) discharge pulses are produced in a relaxation instability between the plasma and a charging capacitor. Spots are also observed on a negatively biased plane Langmuir probe. The probe current pulses are as large as those on the magnet, implying that the high discharge current does not depend on the cathode surface area but on the properties of the spots. The fast current pulses produce large inductive voltages, which can reverse the electrical polarity of the magnet and temporarily operate it as an anode. The discharge current may also oscillate at the frequency determined by the charging capacitor and the discharge circuit inductance. Each half cycle of high-current current pulses exhibits a fast (≃10 ns) current rise when a spot is formed. It induces high frequency (10-100 MHz) transients and ringing oscillations in probes and current circuits. Most probes behave like unmatched antennas for the electromagnetic pulses of spot discharges. Examples are shown to distinguish the source of oscillations and some rf characteristics of Langmuir probes.

Monitoring method and apparatus using high-frequency carrier

DOEpatents

Haynes, Howard D.

1996-01-01

A method and apparatus for monitoring an electrical-motor-driven device by injecting a high frequency carrier signal onto the power line current. The method is accomplished by injecting a high frequency carrier signal onto an AC power line current. The AC power line current supplies the electrical-motor-driven device with electrical energy. As a result, electrical and mechanical characteristics of the electrical-motor-driven device modulate the high frequency carrier signal and the AC power line current. The high frequency carrier signal is then monitored, conditioned and demodulated. Finally, the modulated high frequency carrier signal is analyzed to ascertain the operating condition of the electrical-motor-driven device.

Low-jitter high-power thyristor array pulse driver and generator

DOEpatents

Hanks, Roy L.

2002-01-01

A method and apparatus for generating low-jitter, high-voltage and high-current pulses for driving low impedance loads such as detonator fuses uses a MOSFET driver which, when triggered, discharges a high-voltage pre-charged capacitor into the primary of a toroidal current-multiplying transformer with multiple isolated secondary windings. The secondary outputs are suitable for driving an array of thyristors that discharge a precharged high-voltage capacitor and thus generating the required high-voltage and high-current pulse.

Dual amplitude pulse generator for radiation detectors

DOEpatents

Hoggan, Jerry M.; Kynaston, Ronnie L.; Johnson, Larry O.

2001-01-01

A pulsing circuit for producing an output signal having a high amplitude pulse and a low amplitude pulse may comprise a current source for providing a high current signal and a low current signal. A gate circuit connected to the current source includes a trigger signal input that is responsive to a first trigger signal and a second trigger signal. The first trigger signal causes the gate circuit to connect the high current signal to a pulse output terminal whereas the second trigger signal causes the gate circuit to connect the low current signal to the pulse output terminal.

Effects of high frequency current in welding aluminum alloy 6061

NASA Technical Reports Server (NTRS)

Fish, R. E.

1968-01-01

Uncontrolled high frequency current causes cracking in the heat-affected zone of aluminum alloy 6061 weldments during tungsten inert gas ac welding. Cracking developed when an improperly adjusted superimposed high frequency current was agitating the semimolten metal in the areas of grain boundary.

Porous graphene current collectors filled with silicon as high-performance lithium battery anode

NASA Astrophysics Data System (ADS)

Ababtain, Khalid; Babu, Ganguli; Susarla, Sandhya; Gullapalli, Hemtej; Masurkar, Nirul; Ajayan, Pulickel M.; Mohana Reddy Arava, Leela

2018-01-01

Despite the massive success for high energy density, the charge-discharge current rate performance of the lithium-ion batteries are still a major concern owing to inherent sluggish Li-ion kinetics. Herein, we demonstrate three-dimensional porous electrodes engineered on highly conductive graphene current collectors to enhance the Li-ion conductivity, thereby c-rate performance. Such high-quality graphene provides surface area for loading a large amount of electrochemically active material and strong adhesion with the electrode. The synergism of porous structure and conductive current collector enables us to realize high-performance new-generation silicon anodes with a high energy density of 1.8 mAh cm-2. Further, silicon electrodes revealed with excellent current rates up to 5C with a capacity of 0.37 mAh cm-2 for 500 nm planar thickness.

Ultra high vacuum test setup for electron gun

NASA Astrophysics Data System (ADS)

Pandiyar, M. L.; Prasad, M.; Jain, S. K.; Kumar, R.; Hannurkar, P. R.

2008-05-01

Ultra High Vacuum (UHV) test setup for electron gun testing has been developed. The development of next generation light sources and accelerators require development of klystron as a radio frequency power source, and in turn electron gun. This UHV electron gun test setup can be used to test the electron guns ranging from high average current, quasi-continuous wave to high peak current, single pulse etc. An electron gun has been designed, fabricated, assembled and tested for insulation up to 80 kV under the programme to develop high power klystron for future accelerators. Further testing includes the electron emission parameters characterization of the cathode, as it determines the development of a reliable and efficient electron gun with high electron emission current and high life time as well. This needs a clean ultra high vacuum to study these parameters particularly at high emission current. The cathode emission current, work function and vapour pressure of cathode surface material at high temperature studies will further help in design and development of high power electron gun The UHV electron gun test setup consists of Turbo Molecular Pump (TMP), Sputter Ion Pump (SIP), pressure gauge, high voltage and cathode power supplies, current measurement device, solenoid magnet and its power supply, residual gas analyser etc. The ultimate vacuum less than 2×10-9 mbar was achieved. This paper describes the UHV test setup for electron gun testing.

Commutating Permanent-Magnet Motors At Low Speed

NASA Technical Reports Server (NTRS)

Dolland, C.

1985-01-01

Circuit provides forced commutation during starting. Forced commutation circuit diverts current from inverter SCR's and turns SCR's off during commutation intervals. Silicon controlled rectifier in circuit unnecessary when switch S10 replaced by high-current, high-voltage transistor. At present, high-current, low-voltage device must suffice.

An Annotated Bibliography of High-Voltage Direct-Current Transmission and Flexible AC Transmission (FACTS) Devices, 1991-1993.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Litzenberger, Wayne; Lava, Val

1994-08-01

References are contained for HVDC systems, converter stations and components, overhead transmission lines, cable transmission, system design and operations, simulation of high voltage direct current systems, high-voltage direct current installations, and flexible AC transmission system (FACTS).

78 FR 15281 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-11

... horizontal stabilizer. This AD requires repetitive high frequency eddy current (HFEC) inspections for... repetitive high frequency eddy current (HFEC) inspections for cracking of the left and right rib hinge... high frequency eddy current (HFEC) inspection for cracking of the left and right rib hinge bearing lugs...

77 FR 26993 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-08

... high frequency eddy current (HFEC) inspections for cracking in holes common to the splice strap and... tasks required by this paragraph: Before further flight, do a high frequency eddy current (HFEC... approval must specifically refer to this AD. (h) Detailed and High Frequency Eddy Current Inspections...

High Latitude Precipitating Energy Flux and Joule Heating During Geomagnetic Storms Determined from AMPERE Field-aligned Currents

NASA Astrophysics Data System (ADS)

Robinson, R. M.; Zanetti, L. J.; Anderson, B. J.; Korth, H.; Samara, M.; Michell, R.; Grubbs, G. A., II; Hampton, D. L.; Dropulic, A.

2016-12-01

A high latitude conductivity model based on field-aligned currents measured by the Active Magnetosphere and Planetary Electrodynamics Response Experiment (AMPERE) provides the means for complete specification of electric fields and currents at high latitudes. Based on coordinated measurements made by AMPERE and the Poker Flat Incoherent Scatter Radar, the model determines the most likely value of the ionospheric conductance from the direction, magnitude, and magnetic local time of the field-aligned current. A conductance model driven by field-aligned currents ensures spatial and temporal consistency between the calculated electrodynamic parameters. To validate the results, the Pedersen and Hall conductances were used to calculate the energy flux associated with the energetic particle precipitation. When integrated over the entire hemisphere, the total energy flux compares well with the Hemispheric Power Index derived from the OVATION-PRIME model. The conductances were also combined with the field-aligned currents to calculate the self-consistent electric field, which was then used to compute horizontal currents and Joule heating. The magnetic perturbations derived from the currents replicate most of the variations observed in ground-based magnetograms. The model was used to study high latitude particle precipitation, currents, and Joule heating for 24 magnetic storms. In most cases, the total energy input from precipitating particles and Joule heating exhibits a sharply-peaked maximum at the times of local minima in Dst, suggesting a close coupling between the ring current and the high latitude currents driven by the Region 2 field-aligned currents. The rapid increase and decrease of the high latitude energy deposition suggests an explosive transfer of energy from the magnetosphere to the ionosphere just prior to storm recovery.

Measurements of high impedance two-terminal device with SMU NI PXIe-4139

NASA Astrophysics Data System (ADS)

Bogdanov, S. V.; Lelekov, E. T.; Kovalev, I. V.; Zelenkov, P. V.; Lelekov, A. T.

2016-11-01

To measure high-frequency and low-frequency impedance of betavoltaic power sources (it can be represented as two-terminal device), measurement stand was created. To measure high-frequency part need to inject external test signal through the current transformer with waveform generator and need to use external high-frequency current sensor, because of SMU PXIe-4139 current channel limitations.

Monitoring method and apparatus using high-frequency carrier

DOEpatents

Haynes, H.D.

1996-04-30

A method and apparatus for monitoring an electrical-motor-driven device by injecting a high frequency carrier signal onto the power line current. The method is accomplished by injecting a high frequency carrier signal onto an AC power line current. The AC power line current supplies the electrical-motor-driven device with electrical energy. As a result, electrical and mechanical characteristics of the electrical-motor-driven device modulate the high frequency carrier signal and the AC power line current. The high frequency carrier signal is then monitored, conditioned and demodulated. Finally, the modulated high frequency carrier signal is analyzed to ascertain the operating condition of the electrical-motor-driven device. 6 figs.

In Situ observation of dark current emission in a high gradient rf photocathode gun

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shao, Jiahang; Shi, Jiaru; Antipov, Sergey P.

Undesirable electron field emission (also known as dark current) in high gradient rf photocathode guns deteriorates the quality of the photoemission current and limits the operational gradient. To improve the understanding of dark current emission, a high-resolution (~100 μm) dark current imaging experiment has been performed in an L-band photocathode gun operating at ~100 MV/m of surface gradient. Scattered strong emission areas with high current have been observed on the cathode. The field enhancement factor β of selected regions on the cathode has been measured. Finally, the postexaminations with scanning electron microscopy and white light interferometry reveal the origins ofmore » ~75% strong emission areas overlap with the spots where rf breakdown has occurred.« less

In Situ observation of dark current emission in a high gradient rf photocathode gun

DOE PAGES

Shao, Jiahang; Shi, Jiaru; Antipov, Sergey P.; ...

2016-08-15

Undesirable electron field emission (also known as dark current) in high gradient rf photocathode guns deteriorates the quality of the photoemission current and limits the operational gradient. To improve the understanding of dark current emission, a high-resolution (~100 μm) dark current imaging experiment has been performed in an L-band photocathode gun operating at ~100 MV/m of surface gradient. Scattered strong emission areas with high current have been observed on the cathode. The field enhancement factor β of selected regions on the cathode has been measured. Finally, the postexaminations with scanning electron microscopy and white light interferometry reveal the origins ofmore » ~75% strong emission areas overlap with the spots where rf breakdown has occurred.« less

Magnetoresistive Current Sensors for High Accuracy, High Bandwidth Current Measurement in Spacecraft Power Electronics

NASA Astrophysics Data System (ADS)

Slatter, Rolf; Goffin, Benoit

2014-08-01

The usage of magnetoresistive (MR) current sensors is increasing steadily in the field of power electronics. Current sensors must not only be accurate and dynamic, but must also be compact and robust. The MR effect is the basis for current sensors with a unique combination of precision and bandwidth in a compact package. A space-qualifiable magnetoresistive current sensor with high accuracy and high bandwidth is being jointly developed by the sensor manufacturer Sensitec and the spacecraft power electronics supplier Thales Alenia Space (T AS) Belgium. Test results for breadboards incorporating commercial-off-the-shelf (COTS) sensors are presented as well as an application example in the electronic control and power unit for the thrust vector actuators of the Ariane5-ME launcher.

Free-standing, well-aligned ordered mesoporous carbon nanofibers on current collectors for high-power micro-supercapacitors.

PubMed

Kang, Eunae; Jeon, Gumhye; Kim, Jin Kon

2013-07-21

The mesoporous carbon nanofiber arrays that stand on carbon-gold double-layer current collectors are synthesized by self-assembly of a PS-b-PEO copolymer and resol in AAO templates for a high-power micro-supercapacitor at high current densities.

Device for plasma confinement and heating by high currents and nonclassical plasma transport properties

DOEpatents

Coppi, B.; Montgomery, D.B.

1973-12-11

A toroidal plasma containment device having means for inducing high total plasma currents and current densities and at the same time emhanced plasma heating, strong magnetic confinement, high energy density containment, magnetic modulation, microwaveinduced heating, and diagnostic accessibility is described. (Official Gazette)

78 FR 4042 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-18

... provides an option for a high frequency eddy current inspection for cracking of the critical fastener holes... for a high frequency eddy current inspection for cracking of the critical fastener holes, and repair..., August 9, 2007)), do a high frequency eddy current (HFEC) inspection for cracking of the four critical...

78 FR 40050 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-03

... inspections or high frequency eddy current inspections for cracks of the blended area of the fuselage skin... repetitive external detailed inspections or high frequency eddy current inspections for cracks of the blended..., 2009) is August 3, 2009. (h) Repetitive High Frequency Eddy Current (HFEC) Inspections For airplanes on...

High Current Systems for HyperV and PLX Plasma Railguns

NASA Astrophysics Data System (ADS)

Brockington, S.; Case, A.; Messer, S.; Elton, R.; Witherspoon, F. D.

2011-10-01

HyperV is developing gas fed, pulsed, plasma railgun accelerators for PLX and other high momentum plasma applications. The present 2.5 cm square-bore plasma railgun forms plasma armatures from high density neutral gas (argon), preionizes it electrothermally, and accelerates the armature with 30 cm long parallel-plate railgun electrodes driven by a pulse forming network (PFN). Recent experiments have successfully formed and accelerated plasma armatures of ~4 mg at 40 km/s, with PFN currents of ~400 kA. In order to further increase railgun performance to the PLX design goal of 8 mg at 50 km/s, the PFN was upgraded to support currents of up to ~750 kA. A high voltage, high current linear array spark-gap switch and flexible, low-inductance transmission line were designed and constructed to handle the increased current load. We will describe these systems and present initial performance data from high current operation of the plasma rail gun from spectroscopy, interferometry, and imaging systems as well as pressure, magnetic field, and optical diagnostics. High current performance of railgun bore materials for electrodes and insulators will also be discussed as well as plans for upcoming experimentation with advanced materials. Supported by the U.S. DOE Joint Program in HEDLP.

Apparatus for measuring high frequency currents

NASA Technical Reports Server (NTRS)

Hagmann, Mark J. (Inventor); Sutton, John F. (Inventor)

2003-01-01

An apparatus for measuring high frequency currents includes a non-ferrous core current probe that is coupled to a wide-band transimpedance amplifier. The current probe has a secondary winding with a winding resistance that is substantially smaller than the reactance of the winding. The sensitivity of the current probe is substantially flat over a wide band of frequencies. The apparatus is particularly useful for measuring exposure of humans to radio frequency currents.

High performance direct methanol fuel cell with thin electrolyte membrane

NASA Astrophysics Data System (ADS)

Wan, Nianfang

2017-06-01

A high performance direct methanol fuel cell is achieved with thin electrolyte membrane. 320 mW cm-2 of peak power density and over 260 mW cm-2 at 0.4 V are obtained when working at 90 °C with normal pressure air supply. It is revealed that the increased anode half-cell performance with temperature contributes primarily to the enhanced performance at elevated temperature. From the comparison of iR-compensated cathode potential of methanol/air with that of H2/air fuel cell, the impact of methanol crossover on cathode performance decreases with current density and becomes negligible at high current density. Current density is found to influence fuel efficiency and methanol crossover significantly from the measurement of fuel efficiency at different current density. At high current density, high fuel efficiency can be achieved even at high temperature, indicating decreased methanol crossover.

High beta plasma operation in a toroidal plasma producing device

DOEpatents

Clarke, John F.

1978-01-01

A high beta plasma is produced in a plasma producing device of toroidal configuration by ohmic heating and auxiliary heating. The plasma pressure is continuously monitored and used in a control system to program the current in the poloidal field windings. Throughout the heating process, magnetic flux is conserved inside the plasma and the distortion of the flux surfaces drives a current in the plasma. As a consequence, the total current increases and the poloidal field windings are driven with an equal and opposing increasing current. The spatial distribution of the current in the poloidal field windings is determined by the plasma pressure. Plasma equilibrium is maintained thereby, and high temperature, high beta operation results.

A novel concept of fault current limiter based on saturable core in high voltage DC transmission system

NASA Astrophysics Data System (ADS)

Yuan, Jiaxin; Zhou, Hang; Gan, Pengcheng; Zhong, Yongheng; Gao, Yanhui; Muramatsu, Kazuhiro; Du, Zhiye; Chen, Baichao

2018-05-01

To develop mechanical circuit breaker in high voltage direct current (HVDC) system, a fault current limiter is required. Traditional method to limit DC fault current is to use superconducting technology or power electronic devices, which is quite difficult to be brought to practical use under high voltage circumstances. In this paper, a novel concept of high voltage DC transmission system fault current limiter (DCSFCL) based on saturable core was proposed. In the DCSFCL, the permanent magnets (PM) are added on both up and down side of the core to generate reverse magnetic flux that offset the magnetic flux generated by DC current and make the DC winding present a variable inductance to the DC system. In normal state, DCSFCL works as a smoothing reactor and its inductance is within the scope of the design requirements. When a fault occurs, the inductance of DCSFCL rises immediately and limits the steepness of the fault current. Magnetic field simulations were carried out, showing that compared with conventional smoothing reactor, DCSFCL can decrease the high steepness of DC fault current by 17% in less than 10ms, which verifies the feasibility and effectiveness of this method.

High-risk human papillomavirus infection of the genital tract of women with a previous history or current high-grade vulvar intraepithelial neoplasia.

PubMed

Goffin, Frederic; Mayrand, Marie-Hélène; Gauthier, Philippe; Alobaid, A; Lussier, Christian; Provencher, Diane; Drouin, Pierre; Franco, Eduardo L; Coutlée, François

2006-06-01

Human papillomavirus (HPV) infection is associated with high-grade vulvar intraepithelial neoplasia (VIN-3). The prevalence of anogenital HPV infection in women with previously treated VIN-3 has not been documented yet. This cross-sectional study compared high-risk HPV DNA detection rates in women with past (n = 30) and current (n = 22) VIN-3 to those without current or past VIN (n = 86). HPV DNA was detected in vulvar and cervical samples with Hybrid Capture 2 (HC-2). Smoking was associated in multivariate analysis with current VIN-3 (odds ratio (OR) 8.3, 95% confidence interval (CI) 2.0-8.2) and any VIN-3 history (OR 6.5, 95% CI 2.5-16.5). High-risk HPV DNA was found on the vulva of 64%, 33%, and 20% of women with current VIN-3, past VIN-3, and without previous or current VIN, respectively. After controlling for age and smoking, high-risk HPV vulvar infection was associated with cervical high-risk HPV infection (OR 8.6, 95% CI 2.8-26.5; P = 0.001). After controlling for age, HPV infection was more often multifocal in women with current VIN-3 compared to women with previous but no current VIN-3 lesion (OR 17.6, 95% CI 1.4-227.2). Multifocal vulvar HPV infection was detected in women with previous or active VIN-3. Longitudinal studies are required to determine if the multifocality of HPV infection on the vulva could explain the high recurrence rate of VIN-3.

77 FR 37332 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-21

... the high frequency eddy current inspection for cracking of the critical fastener holes, and repair if... of the bulkhead, and repair if necessary; and proposed an option to the high frequency eddy current...-15152 (72 FR 44753, August 9, 2007)), do a high frequency eddy current (HFEC) inspection for cracking of...

77 FR 43178 - Airworthiness Directives; The Boeing Company Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-24

... eddy current high frequency (ETHF) inspections for cracking on the aft side of the left and right wing... NPRM proposed to require repetitive eddy current high frequency (ETHF) inspections for cracking on the...,000 flight cycles after the effective date of this AD, whichever occurs later, do an eddy current high...

The development of shock wave overpressure driven by channel expansion of high current impulse discharge arc

NASA Astrophysics Data System (ADS)

Xiong, Jia-ming; Li, Lee; Dai, Hong-yu; Wu, Hai-bo; Peng, Ming-yang; Lin, Fu-chang

2018-03-01

During the formation of a high current impulse discharge arc, objects near the discharge arc will be strongly impacted. In this paper, a high power, high current gas switch is used as the site of the impulse discharge arc. The explosion wave theory and the arc channel energy balance equation are introduced to analyze the development of the shock wave overpressure driven by the high current impulse discharge arc, and the demarcation point of the arc channel is given, from which the energy of the arc channel is no longer converted into shock waves. Through the analysis and calculation, it is found that the magnitude of the shock wave overpressure caused by impulse discharge arc expansion is closely related to the arc current rising rate. The arc shock wave overpressure will undergo a slow decay process and then decay rapidly. The study of this paper will perform the function of deepening the understanding of the physical nature of the impulse arc discharge, which can be used to explain the damage effect of the high current impulse discharge arc.

A vacuum sealed high emission current and transmission efficiency carbon nanotube triode

DOE Office of Scientific and Technical Information (OSTI.GOV)

Di, Yunsong; Jiangsu Key Laboratory of Optoelectronic Technology, Nanjing Normal University, Nanjing 210023; Wang, Qilong

A vacuum sealed carbon nanotubes (CNTs) triode with a concave and spoke-shaped Mo grid is presented. Due to the high aperture ratio of the grid, the emission current could be modulated at a relatively high electric field. Totally 75 mA emission current has been obtained from the CNTs cathode with the average applied field by the grid shifting from 8 to 13 V/μm. Whilst with the electron transmission efficiency of the grid over 56%, a remarkable high modulated current electron beam over 42 mA has been collected by the anode. Also contributed by the high aperture ration of the grid,more » desorbed gas molecules could flow away from the emission area rapidly when the triode has been operated at a relative high emission current, and finally collected by a vacion pump. The working pressure has been maintained at ∼1 × 10{sup −7} Torr, seldom spark phenomena occurred. Nearly perfect I-V curve and corresponding Fowler-Nordheim (FN) plot confirmed the accuracy of the measured data, and the emission current was long term stable and reproducible. Thusly, this kind of triode would be used as a high-power electron source.« less

Behavior of a high-temperature superconducting conductor on a round core cable at current ramp rates as high as 67.8 kA s-1 in background fields of up to 19 T

NASA Astrophysics Data System (ADS)

Michael, P. C.; Bromberg, L.; van der Laan, D. C.; Noyes, P.; Weijers, H. W.

2016-04-01

High temperature superconducting (HTS) conductor-on-round-core (CORC®) cables have been developed for use in power transmission systems and large high-field magnets. The use of high-current conductors for large-scale magnets reduces system inductance and limits the peak voltage needed for ramped field operation. A CORC® cable contains a large number of RE-Ba2Cu3O7-δ (RE = rare earth) (REBCO) coated conductors, helically wound in multiple layers on a thin, round former. Large-scale applications, such as fusion and accelerator magnets, require current ramp rates of several kilo-Amperes per second during pulsed operation. This paper presents results that demonstrate the electromagnetic stability of a CORC® cable during transient conditions. Measurements were performed at 4.2 K using a 1.55 m long CORC® cable in background fields of up to 19 T. Repeated current pulses in a background field of 19 T at current ramp rates of up to 67.8 kA s-1 to approximately 90% of the cable’s quench current at that field, did not show any sign of degradation in cable performance due to excessive ac loss or electromagnetic instability. The very high current ramp rates applied during these tests were used to compensate, to the extent possible, the limited cable length accommodated by the test facility, assuming that the measured results could be extrapolated to longer length cables operated at proportionally lower current ramp rates. No shift of the superconducting transition to lower current was measured when the current ramp rate was increased from 25 A s-1 to 67.8 kA s-1. These results demonstrate the viability of CORC® cables for use in low-inductance magnets that operate at moderate to high current ramp rates.

Effects of Neutral Density on Energetic Ions Produced Near High-Current Hollow Cathodes

NASA Technical Reports Server (NTRS)

Kameyama, Ikuya

1997-01-01

Energy distributions of ion current from high-current, xenon hollow cathodes, which are essential information to understand erosion phenomena observed in high-power ion thrusters, were obtained using an electrostatic energy analyzer (ESA). The effects of ambient pressure and external flow rate introduced immediately downstream of hollow cathode on ion currents with energies greater than that associated with the cathode-to-anode potential difference were investigated. The results were analyzed to determine the changes in the magnitudes of ion currents to the ESA at various energies. Either increasing the ambient pressure or adding external flow induces an increase in the distribution of ion currents with moderate energies (epsilon less than 25 to 35 eV) and a decrease in the distribution for high energies (epsilon greater than 25 to 35 eV). The magnitude of the current distribution increase in the moderate energy range is greater for a cathode equipped with a toroidal keeper than for one without a keeper, but the distribution in the high energy range does not seem to be affected by a keeper. An MHD model, which has been proposed to describe energetic-ion production mechanism in hollow cathode at high discharge currents, was developed to describe these effects. The results show, however, that this model involves no mechanism by which a significant increase of ion current could occur at any energy. It was found, on the other hand, that the potential-hill model of energetic ion production, which assumes existence of a local maximum of plasma potential, could explain combined increases in the currents of ions with moderate energies and decreases in high energy ions due to increased neutral atom density using a charge-exchange mechanism. The existing, simplified version of the potential-hill model, however, shows poor quantitative agreement with measured ion-current-energy-distribution changes induced by neutral density changes.

Dynamics of laser-guided alternating current high voltage discharges

NASA Astrophysics Data System (ADS)

Daigle, J.-F.; Théberge, F.; Lassonde, P.; Kieffer, J.-C.; Fujii, T.; Fortin, J.; Châteauneuf, M.; Dubois, J.

2013-10-01

The dynamics of laser-guided alternating current high voltage discharges are characterized using a streak camera. Laser filaments were used to trigger and guide the discharges produced by a commercial Tesla coil. The streaking images revealed that the dynamics of the guided alternating current high voltage corona are different from that of a direct current source. The measured effective corona velocity and the absence of leader streamers confirmed that it evolves in a pure leader regime.

Heterostructured semiconductor single-walled carbon nanotube films for solution-processed high-performance field-effect transistors

NASA Astrophysics Data System (ADS)

Park, Noh-Hwal; Lee, Seung-Hoon; Jeong, Seung-Hyeon; Khim, Dongyoon; Kim, Yun Ho; Yoo, Sungmi; Noh, Yong-Young; Kim, Jang-Joo

2018-03-01

In this paper, we report a simple and effective method to simultaneously achieve a high charge-carrier mobility and low off current in conjugated polymer-wrapped semiconducting single-walled carbon nanotube (s-SWNT) transistors by applying a SWNT bilayer. To achieve the high mobility and low off current, highly purified and less purified s-SWNTs are successively coated to form the semiconducting layer consisting of poly (3-dodecylthiophene-2,5-diyl) (P3DDT)-wrapped high-pressure carbon mono oxide (HiPCO) SWNT (P3DDT-HiPCO) and poly (9, 9-di-n-dodecylfluorene) (PFDD)-wrapped plasma discharge (PD) SWNT (PFDD-PD). The SWNT transistors with bilayer SWNT networked film showed highly improved hole field-effect mobility (6.18 ± 0.85 cm2V-1s-1 average), on/off current ratio (107), and off current (˜1 pA). Thus, the combination of less purified PFDD-PD (98%-99%) charge-injection layer and highly purified s-P3DDT-HiPCO (>99%) charge-transport layer as the bi-layered semiconducting film achieved high mobility and low off current simultaneously.

Excitation of plasma waves by nonlinear currents induced by a high-frequency electromagnetic pulse

NASA Astrophysics Data System (ADS)

Grishkov, V. E.; Uryupin, S. A.

2017-03-01

Excitation of plasma waves by nonlinear currents induced by a high-frequency electromagnetic pulse is analyzed within the kinetic approach. It is shown that the most efficient source of plasma waves is the nonlinear current arising due to the gradient of the energy density of the high-frequency field. Generation of plasma waves by the drag current is usually less efficient but not negligibly small at relatively high frequencies of electron-ion collisions. The influence of electron collisions on the excitation of plasma waves by pulses of different duration is described quantitatively.

Excitation of plasma waves by nonlinear currents induced by a high-frequency electromagnetic pulse

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grishkov, V. E.; Uryupin, S. A., E-mail: uryupin@sci.lebedev.ru

Excitation of plasma waves by nonlinear currents induced by a high-frequency electromagnetic pulse is analyzed within the kinetic approach. It is shown that the most efficient source of plasma waves is the nonlinear current arising due to the gradient of the energy density of the high-frequency field. Generation of plasma waves by the drag current is usually less efficient but not negligibly small at relatively high frequencies of electron–ion collisions. The influence of electron collisions on the excitation of plasma waves by pulses of different duration is described quantitatively.

High Entropy Alloys: A Current Evaluation of Founding Ideas and Core Effects and Exploring Nonlinear Alloys (Postprint)

DTIC Science & Technology

2017-08-29

contain IM phases when using TEM diffraction.1,2 High -Entropy Alloys: A Current Evaluation of Founding Ideas and Core Effects and Exploring ‘‘Nonlinear...obvious outsider. Specifically, an alloy with a high Tm need not contain only elements with high Tm, and it can include one or two elements of moderate or...AFRL-RX-WP-JA-2017-0383 HIGH ENTROPY ALLOYS: A CURRENT EVALUATION OF FOUNDING IDEAS AND CORE EFFECTS AND EXPLORING "NONLINEAR ALLOYS

High current, high bandwidth laser diode current driver

NASA Technical Reports Server (NTRS)

Copeland, David J.; Zimmerman, Robert K., Jr.

1991-01-01

A laser diode current driver has been developed for free space laser communications. The driver provides 300 mA peak modulation current and exhibits an optical risetime of less than 400 ps. The current and optical pulses are well behaved and show minimal ringing. The driver is well suited for QPPM modulation at data rates up to 440 Mbit/s. Much previous work has championed current steering circuits; in contrast, the present driver is a single-ended on/off switch. This results in twice the power efficiency as a current steering driver. The driver electrical efficiency for QPPM data is 34 percent. The high speed switch is realized with a Ku-band GaAsFET transistor, with a suitable pre-drive circuit, on a hybrid microcircuit adjacent to the laser diode.

16 CFR Figures 1 and 2 to Part 1204 - Suggested Instrumentation for Current Monitoring Device and High Voltage Facility

Code of Federal Regulations, 2012 CFR

2012-01-01

... 16 Commercial Practices 2 2012-01-01 2012-01-01 false Suggested Instrumentation for Current Monitoring Device and High Voltage Facility 1 Figures 1 and 2 to Part 1204 Commercial Practices CONSUMER... Instrumentation for Current Monitoring Device and High Voltage Facility EC03OC91.008 ...

16 CFR Figures 1 and 2 to Part 1204 - Suggested Instrumentation for Current Monitoring Device and High Voltage Facility

Code of Federal Regulations, 2014 CFR

2014-01-01

... 16 Commercial Practices 2 2014-01-01 2014-01-01 false Suggested Instrumentation for Current Monitoring Device and High Voltage Facility 1 Figures 1 and 2 to Part 1204 Commercial Practices CONSUMER... Instrumentation for Current Monitoring Device and High Voltage Facility EC03OC91.008 ...

16 CFR Figures 1 and 2 to Part 1204 - Suggested Instrumentation for Current Monitoring Device and High Voltage Facility

Code of Federal Regulations, 2013 CFR

2013-01-01

... 16 Commercial Practices 2 2013-01-01 2013-01-01 false Suggested Instrumentation for Current Monitoring Device and High Voltage Facility 1 Figures 1 and 2 to Part 1204 Commercial Practices CONSUMER... Instrumentation for Current Monitoring Device and High Voltage Facility EC03OC91.008 ...

76 FR 52901 - Airworthiness Directives; The Boeing Company Model 757-200, -200PF, and -200CB Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... if necessary. This proposed AD would also add an option for the high frequency eddy current... also adds an optional ultrasonic inspection for the high frequency eddy current inspection to detect... proposed AD would also add an option for the high frequency eddy current inspection for cracking of the...

Investigation of MAGSAT and TRIAD magnetometer data to provide corrective information on high-lattitude external fields

NASA Technical Reports Server (NTRS)

Potemra, T. A. (Principal Investigator); Sugiura, M.; Zanettic, L. J.

1982-01-01

Disturbances in the MAGSAT magnetometer data set due to high latitude phenomena were evaluated. Much of the categorization of disturbances due to Birkeland currents, ionospheric Hall currents, fine structure and wave phenomena was done with the MAGSAT data catalog. A color graphics technique was developed for the display of disturbances from multiple orbits, from which one can infer a 'global-image' of the current systems of the auroral zone. The MAGSAT 4/81 magnetic field model appears to represent the Earth's main field at high latitudes very well for the epoch 1980. MAGSAT's low altitude allows analysis of disturbances in the magnetometer data due to ionospheric electrojet currents. These current distributions were modeled properly for single events as a precursor to the inference of the Birkeland current system. MAGSAT's orbit was approximately shared with that of the Navy/APL TRIAD satellite. This allowed space-time studies of the magnetic disturbance signatures to be performed, the result being an approximately 75% agreement in, as well as high frequency of, signatures due to Birkeland currents. Thus the field-aligned currents are a steady-state participant in the Earth's magnetospheric current system.

Current control of PMSM based on maximum torque control reference frame

NASA Astrophysics Data System (ADS)

Ohnuma, Takumi

2017-07-01

This study presents a new method of current controls of PMSMs (Permanent Magnet Synchronous Motors) based on a maximum torque control reference frame, which is suitable for high-performance controls of the PMSMs. As the issues of environment and energy increase seriously, PMSMs, one of the AC motors, are becoming popular because of their high-efficiency and high-torque density in various applications, such as electric vehicles, trains, industrial machines, and home appliances. To use the PMSMs efficiently, a proper current control of the PMSMs is necessary. In general, a rotational coordinate system synchronizing with the rotor is used for the current control of PMSMs. In the rotating reference frame, the current control is easier because the currents on the rotating reference frame can be expressed as a direct current in the controller. On the other hand, the torque characteristics of PMSMs are non-linear and complex; the PMSMs are efficient and high-density though. Therefore, a complicated control system is required to involve the relation between the torque and the current, even though the rotating reference frame is adopted. The maximum torque control reference frame provides a simpler way to control efficiently the currents taking the torque characteristics of the PMSMs into consideration.

Improved Transient and Steady-State Performances of Series Resonant ZCS High-Frequency Inverter-Coupled Voltage Multiplier Converter with Dual Mode PFM Control Scheme

NASA Astrophysics Data System (ADS)

Chu, Enhui; Gamage, Laknath; Ishitobi, Manabu; Hiraki, Eiji; Nakaoka, Mutsuo

The A variety of switched-mode high voltage DC power supplies using voltage-fed type or current-fed type high-frequency transformer resonant inverters using MOS gate bipolar power transistors; IGBTs have been recently developed so far for a medical-use X-ray high power generator. In general, the high voltage high power X-ray generator using voltage-fed high frequency inverter with a high voltage transformer link has to meet some performances such as (i) short rising period in start transient of X-ray tube voltage (ii) no overshoot transient response in tube voltage, (iii) minimized voltage ripple in periodic steady-state under extremely wide load variations and filament heater current fluctuation conditions of the X-ray tube. This paper presents two lossless inductor snubber-assisted series resonant zero current soft switching high-frequency inverter using a diode-capacitor ladder type voltage multiplier called Cockcroft-Walton circuit, which is effectively implemented for a high DC voltage X-ray power generator. This DC high voltage generator which incorporates pulse frequency modulated series resonant inverter using IGBT power module packages is based on the operation principle of zero current soft switching commutation scheme under discontinuous resonant current and continuous resonant current transition modes. This series capacitor compensated for transformer resonant power converter with a high frequency transformer linked voltage boost multiplier can efficiently work a novel selectively-changed dual mode PFM control scheme in order to improve the start transient and steady-state response characteristics and can completely achieve stable zero current soft switching commutation tube filament current dependent for wide load parameter setting values with the aid of two lossless inductor snubbers. It is proved on the basis of simulation and experimental results in which a simple and low cost control implementation based on selectively-changed dual-mode PFM for high-voltage X-ray DC-DC power converter with a voltage multiplier strategy has some specified voltage pattern tracking voltage response performances under rapid rising time and no overshoot in start transient tube voltage as well as the minimized steady-state voltage ripple in tube voltage.

A study of field-aligned currents observed at high and low altitudes in the nightside magnetosphere

NASA Technical Reports Server (NTRS)

Elphic, R. C.; Craven, J. D.; Frank, L. A.; Sugiura, M.

1988-01-01

Field-aligned current structures on auroral field lines observed at low and high altitudes using DE 1 and ISEE 2 magnetometer, and particle data observed when the spacecraft are in magnetic conjunction in the near-midnight magnetosphere, are investigated. To minimize latitudinal ambiguity, the plasma-sheet boundary layer observed with ISEE 2 and the discrete aurora at the poleward edge of the auroral oval with DE 1 are studied. The overall current observed at highest latitudes is flowing into the ionosphere, and is likely to be carried by ionospheric electrons flowing upward. There are, however, smaller-scale current structures within this region. The sense and magnitude of the field-aligned currents agree at the two sites. The ISEE 2 data suggests that the high-latitude downward current corresponds to the high-latitude boundary of the plasma-sheet boundary layer, and may be associated with the ion beams observed there.

Effect of high current density to defect generation of blue LED and its characterization with transmission electron microscope

NASA Astrophysics Data System (ADS)

Gunawan, R.; Sugiarti, E.; Isnaeni; Purawiardi, R. I.; Widodo, H.; Muslimin, A. N.; Yuliasari; Ronaldus, C. E.; Prastomo, N.; Hastuty, S.

2018-03-01

The optical, electrical and structural characteristics of InGaN-based blue light-emitting diodes (LEDs) were investigated to identify the degradation of LED before and after current injection. The sample was injected by high current of 200 A/cm2 for 5 and 20 minutes. It was observed that injection of current shifts light intensity and wavelength characteristics that indicated defect generation. Transmission Electron Microscopy (TEM) characterization was carried out in order to clarify the structure degradation caused by defect in active layer which consisted of 14 quantum well with thickness of about 5 nm and confined with barrier layer with thickness of about 12 nm. TEM results showed pre-existing defect in LED before injection with high current. Furthermore, discontinue and edge defect was found in dark spot region of LED after injection with high current.

High-performance supercapacitors using a nanoporous current collector made from super-aligned carbon nanotubes.

PubMed

Zhou, Ruifeng; Meng, Chuizhou; Zhu, Feng; Li, Qunqing; Liu, Changhong; Fan, Shoushan; Jiang, Kaili

2010-08-27

Nanoporous current collectors for supercapacitors have been fabricated by cross-stacking super-aligned carbon nanotube (SACNT) films as a replacement for heavy conventional metallic current collectors. The CNT-film current collectors have good conductivity, extremely low density (27 microg cm(-2)), high specific surface area, excellent flexibility and good electrochemical stability. Nanosized active materials such as NiO, Co(3)O(4) or Mn(2)O(3) nanoparticles can be directly synthesized on the SACNT films by a straightforward one-step, in situ decomposition strategy that is both efficient and environmentally friendly. These composite films can be integrated into a pseudo-capacitor that does not use metallic current collectors, but nevertheless shows very good performance, including high specific capacitance (approximately 500 F g(-1), including the current collector mass), reliable electrochemical stability (<4.5% degradation in 2500 cycles) and a very high rate capability (245 F g(-1) at 155 A g(-1)).

High-performance supercapacitors using a nanoporous current collector made from super-aligned carbon nanotubes

NASA Astrophysics Data System (ADS)

Zhou, Ruifeng; Meng, Chuizhou; Zhu, Feng; Li, Qunqing; Liu, Changhong; Fan, Shoushan; Jiang, Kaili

2010-08-01

Nanoporous current collectors for supercapacitors have been fabricated by cross-stacking super-aligned carbon nanotube (SACNT) films as a replacement for heavy conventional metallic current collectors. The CNT-film current collectors have good conductivity, extremely low density (27 µg cm - 2), high specific surface area, excellent flexibility and good electrochemical stability. Nanosized active materials such as NiO, Co3O4 or Mn2O3 nanoparticles can be directly synthesized on the SACNT films by a straightforward one-step, in situ decomposition strategy that is both efficient and environmentally friendly. These composite films can be integrated into a pseudo-capacitor that does not use metallic current collectors, but nevertheless shows very good performance, including high specific capacitance (~500 F g - 1, including the current collector mass), reliable electrochemical stability (<4.5% degradation in 2500 cycles) and a very high rate capability (245 F g - 1 at 155 A g - 1).

Vortices in high-performance high-temperature superconductors

DOE PAGES

Kwok, Wai-Kwong; Welp, Ulrich; Glatz, Andreas; ...

2016-09-21

The behavior of vortex matter in high-temperature superconductors (HTS) controls the entire electromagnetic response of the material, including its current carrying capacity. In this paper, we review the basic concepts of vortex pinning and its application to a complex mixed pinning landscape to enhance the critical current and to reduce its anisotropy. We focus on recent scientific advances that have resulted in large enhancements of the in-field critical current in state-of-the-art second generation (2G) YBCO coated conductors and on the prospect of an isotropic, high-critical current superconductor in the iron-based superconductors. Finally, we discuss an emerging new paradigm of criticalmore » current by design—a drive to achieve a quantitative correlation between the observed critical current density and mesoscale mixed pinning landscapes by using realistic input parameters in an innovative and powerful large-scale time dependent Ginzburg–Landau approach to simulating vortex dynamics.« less

Ultrastable low-noise current amplifier: a novel device for measuring small electric currents with high accuracy.

PubMed

Drung, D; Krause, C; Becker, U; Scherer, H; Ahlers, F J

2015-02-01

An ultrastable low-noise current amplifier (ULCA) is presented. The ULCA is a non-cryogenic instrument based on specially designed operational amplifiers and resistor networks. It involves two stages, the first providing a 1000-fold current gain and the second performing a current-to-voltage conversion via an internal 1 MΩ reference resistor or, optionally, an external standard resistor. The ULCA's transfer coefficient is highly stable versus time, temperature, and current amplitude within the full dynamic range of ±5 nA. The low noise level of 2.4 fA/√Hz helps to keep averaging times short at small input currents. A cryogenic current comparator is used to calibrate both input current gain and output transresistance, providing traceability to the quantum Hall effect. Within one week after calibration, the uncertainty contribution from short-term fluctuations and drift of the transresistance is about 0.1 parts per million (ppm). The long-term drift is typically 5 ppm/yr. A high-accuracy variant is available that shows improved stability of the input gain at the expense of a higher noise level of 7.5 fA/√Hz. The ULCA also allows the traceable generation of small electric currents or the calibration of high-ohmic resistors.

Ultrastable low-noise current amplifier: A novel device for measuring small electric currents with high accuracy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Drung, D.; Krause, C.; Becker, U.

2015-02-15

An ultrastable low-noise current amplifier (ULCA) is presented. The ULCA is a non-cryogenic instrument based on specially designed operational amplifiers and resistor networks. It involves two stages, the first providing a 1000-fold current gain and the second performing a current-to-voltage conversion via an internal 1 MΩ reference resistor or, optionally, an external standard resistor. The ULCA’s transfer coefficient is highly stable versus time, temperature, and current amplitude within the full dynamic range of ±5 nA. The low noise level of 2.4 fA/√Hz helps to keep averaging times short at small input currents. A cryogenic current comparator is used to calibratemore » both input current gain and output transresistance, providing traceability to the quantum Hall effect. Within one week after calibration, the uncertainty contribution from short-term fluctuations and drift of the transresistance is about 0.1 parts per million (ppm). The long-term drift is typically 5 ppm/yr. A high-accuracy variant is available that shows improved stability of the input gain at the expense of a higher noise level of 7.5 fA/√Hz. The ULCA also allows the traceable generation of small electric currents or the calibration of high-ohmic resistors.« less

Ultrastable low-noise current amplifier: A novel device for measuring small electric currents with high accuracy

NASA Astrophysics Data System (ADS)

Drung, D.; Krause, C.; Becker, U.; Scherer, H.; Ahlers, F. J.

2015-02-01

An ultrastable low-noise current amplifier (ULCA) is presented. The ULCA is a non-cryogenic instrument based on specially designed operational amplifiers and resistor networks. It involves two stages, the first providing a 1000-fold current gain and the second performing a current-to-voltage conversion via an internal 1 MΩ reference resistor or, optionally, an external standard resistor. The ULCA's transfer coefficient is highly stable versus time, temperature, and current amplitude within the full dynamic range of ±5 nA. The low noise level of 2.4 fA/√Hz helps to keep averaging times short at small input currents. A cryogenic current comparator is used to calibrate both input current gain and output transresistance, providing traceability to the quantum Hall effect. Within one week after calibration, the uncertainty contribution from short-term fluctuations and drift of the transresistance is about 0.1 parts per million (ppm). The long-term drift is typically 5 ppm/yr. A high-accuracy variant is available that shows improved stability of the input gain at the expense of a higher noise level of 7.5 fA/√Hz. The ULCA also allows the traceable generation of small electric currents or the calibration of high-ohmic resistors.

Spacecraft Charging Current Balance Model Applied to High Voltage Solar Array Operations

NASA Technical Reports Server (NTRS)

Willis, Emily M.; Pour, Maria Z. A.

2016-01-01

Spacecraft charging induced by high voltage solar arrays can result in power losses and degradation of spacecraft surfaces. In some cases, it can even present safety issues for astronauts performing extravehicular activities. An understanding of the dominant processes contributing to spacecraft charging induced by solar arrays is important to current space missions, such as the International Space Station, and to any future space missions that may employ high voltage solar arrays. A common method of analyzing the factors contributing to spacecraft charging is the current balance model. Current balance models are based on the simple idea that the spacecraft will float to a potential such that the current collecting to the surfaces equals the current lost from the surfaces. However, when solar arrays are involved, these currents are dependent on so many factors that the equation becomes quite complicated. In order for a current balance model to be applied to solar array operations, it must incorporate the time dependent nature of the charging of dielectric surfaces in the vicinity of conductors1-3. This poster will present the factors which must be considered when developing a current balance model for high voltage solar array operations and will compare results of a current balance model with data from the Floating Potential Measurement Unit4 on board the International Space Station.

Organic-inorganic hybrid inverted photodiode with planar heterojunction for achieving low dark current and high detectivity

NASA Astrophysics Data System (ADS)

Ha, JaeUn; Yoon, Seongwon; Lee, Jong-Soo; Chung, Dae Sung

2016-03-01

In this study, the strategy of using an organic-inorganic hybrid planar heterojunction consisting of polymeric semiconductors and inorganic nanocrystals is introduced to realize a high-performance hybrid photodiode (HPD) with low dark current and high detectivity. To prevent undesired charge injection under the reverse bias condition, which is the major dark current source of the photodiode, a well-defined planar heterojunction is strategically constructed via smart solution process techniques. The optimized HPD renders a low dark current of ˜10-5 mA cm-2 at -5 V and ˜10-6 mA cm-2 at -1 V, as well as a high detectivity ˜1012 Jones across the entire visible wavelength range. Furthermore, excellent photocurrent stability is demonstrated under continuous light exposure. We believe that the solution-processed planar heterojunction with inverted structure can be an attractive alternative diode structure for fabricating high-performance HPDs, which usually suffer from high dark current issues.

Development and Testing of High Current Hollow Cathodes for High Power Hall Thrusters

NASA Technical Reports Server (NTRS)

Kamhawi, Hani; Van Noord, Jonathan

2012-01-01

NASA's Office of the Chief Technologist In-Space Propulsion project is sponsoring the testing and development of high power Hall thrusters for implementation in NASA missions. As part of the project, NASA Glenn Research Center is developing and testing new high current hollow cathode assemblies that can meet and exceed the required discharge current and life-time requirements of high power Hall thrusters. This paper presents test results of three high current hollow cathode configurations. Test results indicated that two novel emitter configurations were able to attain lower peak emitter temperatures compared to state-of-the-art emitter configurations. One hollow cathode configuration attained a cathode orifice plate tip temperature of 1132 degC at a discharge current of 100 A. More specifically, test and analysis results indicated that a novel emitter configuration had minimal temperature gradient along its length. Future work will include cathode wear tests, and internal emitter temperature and plasma properties measurements along with detailed physics based modeling.

Discharge Characterization of 40 cm-Microwave ECR Ion Source and Neutralizer

NASA Technical Reports Server (NTRS)

Foster, John E.; Patterson, Michael J.; Britton, Melissa

2003-01-01

Discharge characteristics of a 40 cm, 2.45 GHz Electron Cyclotron Resonance (ECR) ion thruster discharge chamber and neutralizer were acquired. Thruster bulk discharge plasma characteristics were assessed using a single Langmuir probe. Total extractable ion current was measured as a function of input microwave power and flow rate. Additionally, radial ion current density profiles at the thruster.s exit plane were characterized using five equally spaced Faraday probes. Distinct low and high density operating modes were observed as discharge input power was varied from 0 to 200 W. In the high mode, extractable ion currents as high as 0.82 A were measured. Neutralizer emission current was characterized as a function of flow rate and microwave power. Neutralizer extraction currents as high as 0.6 A were measured.

75 FR 5692 - Airworthiness Directives; The Boeing Company Model 747-200C and -200F Series Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-04

... all Model 747-200C and -200F series airplanes. This AD requires a high frequency eddy current (HFEC... on July 6, 2009 (74 FR 31894). That NPRM proposed to require a high frequency eddy current inspection..., whichever occurs later: Do an open-hole high frequency eddy current (HFEC) inspection of all the fastener...

A High-Sensitivity Current Sensor Utilizing CrNi Wire and Microfiber Coils

PubMed Central

Xie, Xiaodong; Li, Jie; Sun, Li-Peng; Shen, Xiang; Jin, Long; Guan, Bai-ou

2014-01-01

We obtain an extremely high current sensitivity by wrapping a section of microfiber on a thin-diameter chromium-nickel wire. Our detected current sensitivity is as high as 220.65 nm/A2 for a structure length of only 35 μm. Such sensitivity is two orders of magnitude higher than the counterparts reported in the literature. Analysis shows that a higher resistivity or/and a thinner diameter of the metal wire may produce higher sensitivity. The effects of varying the structure parameters on sensitivity are discussed. The presented structure has potential for low-current sensing or highly electrically-tunable filtering applications. PMID:24824372

A high-sensitivity current sensor utilizing CrNi wire and microfiber coils.

PubMed

Xie, Xiaodong; Li, Jie; Sun, Li-Peng; Shen, Xiang; Jin, Long; Guan, Bai-ou

2014-05-12

We obtain an extremely high current sensitivity by wrapping a section of microfiber on a thin-diameter chromium-nickel wire. Our detected current sensitivity is as high as 220.65 nm/A2 for a structure length of only 35 μm. Such sensitivity is two orders of magnitude higher than the counterparts reported in the literature. Analysis shows that a higher resistivity or/and a thinner diameter of the metal wire may produce higher sensitivity. The effects of varying the structure parameters on sensitivity are discussed. The presented structure has potential for low-current sensing or highly electrically-tunable filtering applications.

High-current electron gun with a planar magnetron integrated with an explosive-emission cathode

NASA Astrophysics Data System (ADS)

Kiziridi, P. P.; Ozur, G. E.

2017-05-01

A new high-current electron gun with plasma anode and explosive-emission cathode integrated with planar pulsed powered magnetron is described. Five hundred twelve copper wires 1 mm in diameter and 15 mm in height serve as emitters. These emitters are installed on stainless steel disc (substrate) with 3-mm distance between them. Magnetron discharge plasma provides increased ion density on the periphery of plasma anode formed by high-current Penning discharge ignited within several milliseconds after starting of the magnetron discharge. The increased on the periphery ion density improves the uniformity of high-current electron beam produced in such an electron gun.

Plasma Experiments on an Internal Coil Device with an High Temperature Superconductor

NASA Astrophysics Data System (ADS)

Yuichi, Ogawa; Junji, Morikawa; Kotaro, Ohkuni; Dan, Hori; Shigeo, Yamakosi; Nagato, Yanagi; Toshiyuki, Mito; Masataka, Iwakuma; Toshio, Uede

2003-10-01

An internal coil device would be expected for exploring high beta plasmas based on plasma relaxation process. Prof. A. Hasegawa proposed an advanced fusion reactor with a dipole configuration, and Mahajan and Yoshida developed a new high beta state based on two-fluid relaxation theory. To study these high beta plasmas, we have constructed an internal coil device with a high temperature superconductor. The major radius of the internal coil is 15 cm, and the coil current is 50 kA. Three different types of Ag-sheathed Bi-2223 tapes are employed; i.e., a high critical current tape with a low silver ratio for the main HTS coil, a 0.3wt3atprovided by a GM refrigerator and supplied to the coil through a check valve, and the coil current is directly excited with the external power supply through removable electrodes. It took about 11 hours to cool the coil down to 21 K from the room temperature, and the nominal cable current of 118 A (overall coil current: 50 kA) has been achieved. A decay time constant of the persistent current is a few tens of hours. Plasma experiments in a dipole configuration have been initiated.

Highly sensitive current sensor utilizing CrNi-wire supported microfiber coils

NASA Astrophysics Data System (ADS)

Xie, Xiaodong; Li, Jie; Sun, Li-Peng; Jin, Long; Guan, Bai-ou

2013-09-01

High current sensitivity is obtained based on a microfiber that is wrapping around a chrome-nickel (CrNi) wire. Due to the strong heating effect of the CrNi wire with the flowing electric current, the mode index and the loop length of microfiber are changed, resulting in the shift of resonant wavelength. The measured current responsivity is as high as 220.65nm/A2, which is in two or three magnitude orders than the previously-obtained ones. We study the influence of component size to the structure performance, which is useful for future applications of current sensing or tuning devices.

Growth and characterization of high current density, high-speed InAs/AlSb resonant tunneling diodes

NASA Technical Reports Server (NTRS)

Soderstrom, J. R.; Brown, E. R.; Parker, C. D.; Mahoney, L. J.; Yao, J. Y.

1991-01-01

InAs/AlSb double-barrier resonant tunneling diodes with peak current densities up to 370,000 A/sq cm and high peak-to-valley current ratios of 3.2 at room temperature have been fabricated. The peak current density is well-explained by a stationary-state transport model with the two-band envelope function approximation. The valley current density predicted by this model is less than the experimental value by a factor that is typical of the discrepancy found in other double-barrier structures. It is concluded that threading dislocations are largely inactive in the resonant tunneling process.

Motor monitoring method and apparatus using high frequency current components

DOEpatents

Casada, D.A.

1996-05-21

A motor current analysis method and apparatus for monitoring electrical-motor-driven devices are disclosed. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device. 16 figs.

Motor monitoring method and apparatus using high frequency current components

DOEpatents

Casada, Donald A.

1996-01-01

A motor current analysis method and apparatus for monitoring electrical-motor-driven devices. The method and apparatus utilize high frequency portions of the motor current spectra to evaluate the condition of the electric motor and the device driven by the electric motor. The motor current signal produced as a result of an electric motor is monitored and the low frequency components of the signal are removed by a high-pass filter. The signal is then analyzed to determine the condition of the electrical motor and the driven device.

Gigahertz single-electron pumping in silicon with an accuracy better than 9.2 parts in 10{sup 7}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yamahata, Gento, E-mail: yamahata.gento@lab.ntt.co.jp; Karasawa, Takeshi; Fujiwara, Akira

2016-07-04

High-speed and high-accuracy pumping of a single electron is crucial for realizing an accurate current source, which is a promising candidate for a quantum current standard. Here, using a high-accuracy measurement system traceable to primary standards, we evaluate the accuracy of a Si tunable-barrier single-electron pump driven by a single sinusoidal signal. The pump operates at frequencies up to 6.5 GHz, producing a current of more than 1 nA. At 1 GHz, the current plateau with a level of about 160 pA is found to be accurate to better than 0.92 ppm (parts per million), which is a record value for 1-GHz operation. At 2 GHz,more » the current plateau offset from 1ef (∼320 pA) by 20 ppm is observed. The current quantization accuracy is improved by applying a magnetic field of 14 T, and we observe a current level of 1ef with an accuracy of a few ppm. The presented gigahertz single-electron pumping with a high accuracy is an important step towards a metrological current standard.« less

77 FR 68050 - Airworthiness Directives; Airbus Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-15

... repetitive [high frequency eddy current] inspections [for cracks] of certain crossbeams including those... actions have already been done. (g) Repetitive High Frequency Eddy Current Inspections (1) For airplanes... AD, whichever occurs first. FedEx stated that the current repetitive inspection interval is ten times...

Current interruption in inductive storage systems with inertial current source

NASA Astrophysics Data System (ADS)

Vitkovitsky, I. M.; Conte, D.; Ford, R. D.; Lupton, W. H.

1980-03-01

Utilization of inertial current source inductive storage with high power output requires a switch with short opening time. This switch must operate as a circuit breaker, i.e., be capable to carry the current for a time period characteristic of inertial systems, such as homopolar generators. For reasonable efficiency, its opening time must be fast to minimize the energy dissipated in downstream fuse stages required for any additional pulse compression. A switch that satisfies these criteria, as well as other requirements such as that for high voltage operation associated with high power output, is an explosively driven switch consisting of large number of gaps arranged in series. The performance of this switch in limiting and/or interrupting currents produced by large generators has been studied. Single switch modules were designed and tested for limiting the commutating current output of 1 MW, 60 Hz, generator and 500 KJ capacitor banks. Current limiting and commutation were evaluated, using these sources, for currents ranging up to 0.4 MA. The explosive opening of the switch was found to provide an effective first stage for further pulse compression. It opens in tens of microseconds, commutates current at high efficiency ( = 905) recovers very rapidly over a wide range of operating conditions.

Influence of High-Current-Density Impulses on the Compression Behavior: Experiments with Iron and a Nickel-Based Alloy

NASA Astrophysics Data System (ADS)

Demler, E.; Gerstein, G.; Dalinger, A.; Epishin, A.; Rodman, D.; Nürnberger, F.

2017-01-01

Difficulties of processing of high strength and/or brittle materials by plastic deformation, e.g., by forging, require to develop new industrial technologies. In particular, the feasible deformation rates are limited for low-ductile metallic materials. For this reason, processes were investigated to improve the deformability in which electrical impulses are to be applied to lower the yield strength. However, owing to the impulse duration and low current densities, concomitant effects always occur, e.g., as a result of Joule heating. Current developments in power electronics allow now to transmit high currents as short pulses. By reducing the impulse duration and increasing the current density, the plasticity of metallic materials can be correspondingly increased. Using the examples of polycrystalline iron and a single-crystal, nickel-based alloy (PWA 1480), current advances in the development of methods for forming materials by means of high-current-density impulses are demonstrated. For this purpose, appropriate specimens were loaded in compression and, using novel testing equipment, subjected to a current strength of 10 kA with an impulse duration of 2 ms. For a pre-defined strain, the test results show a significant decrease in the compressive stress during the compression test and a significant change in the dislocation distribution following the current impulse treatment.

75 FR 2831 - Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, and MD-10-10F...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-19

... proposed AD would require a one-time high frequency eddy current inspection of fastener holes for cracks at... high frequency eddy current inspection of fastener holes for cracking at the left and right side wing... of this AD, do a one-time high frequency eddy current inspection for cracking of fastener holes at...

Double disordered YBCO coated conductors of industrial scale: high currents in high magnetic field

NASA Astrophysics Data System (ADS)

Abraimov, D.; Ballarino, A.; Barth, C.; Bottura, L.; Dietrich, R.; Francis, A.; Jaroszynski, J.; Majkic, G. S.; McCallister, J.; Polyanskii, A.; Rossi, L.; Rutt, A.; Santos, M.; Schlenga, K.; Selvamanickam, V.; Senatore, C.; Usoskin, A.; Viouchkov, Y. L.

2015-11-01

A significant increase of critical current in high magnetic field, up to 31 T, was recorded in long tapes manufactured by employing a double-disorder route. In a double-disordered high-temperature superconductor (HTS), a superimposing of intrinsic and extrinsic disorder takes place in a way that (i) the intrinsic disorder is caused by local stoichiometry deviations that lead to defects of crystallinity that serve as pining centers in the YBa2Cu3O x-δ matrix and (ii) the extrinsic disorder is introduced via embedded atoms or particles of foreign material (e.g. barium zirconate), which create a set of lattice defects. We analyzed possible technological reasons for this current gain. The properties of these tapes over a wider field-temperature range as well as field anisotropy were also studied. Record values of critical current as high as 309 A at 31 T, 500 A at 18 Tm and 1200 A at 5 T were found in 4 mm wide tape at 4.2 K and B perpendicular to tape surface. HTS layers were processed in medium-scale equipment that allows a maximum batch length of 250 m while 22 m long batches were provided for investigation. Abnormally high ratios (up to 10) of critical current density measured at 4.2 K, 19 T to critical current density measured at 77 K, self-field were observed in tapes with the highest in-field critical current. Anisotropy of the critical current as well as angular dependences of n and α values were investigated. The temperature dependence of critical current is presented for temperatures between 4.2 and 40 K. Prospects for the suppression of the dog-bone effect by Cu plating and upscale of processing chain to >500 m piece length are discussed.

Measurements from a Compact Cost-Effective Beamline for the THC14 PET Cyclotron

NASA Astrophysics Data System (ADS)

Dehnel, M. P.; Theroux, J.; Christensen, T.; Stewart, T. M.; Roeder, M.; Sirot, P.; Fasse, D.; Brasile, J. P.; Raoult, F.; Buckley, K.

2009-03-01

The THC14 PET Cyclotron produced by THALES specifies two compact cost-effective beamlines for high current PET radioisotope production. The design and development of the beamline system was reported previously in NIM B 261 (2007) pp 809-812. This paper describes the successful testing of this compact beamline at the first installation. A series of measurement data are presented starting from low current scintillator image data, higher current beam diagnostic data (baffles, collimators, targets) and finally a simultaneous dual beam run on Faraday Cups. The beamline system has proven to be a flexible and valuable tool for optimizing high current beam intensity distribution on target in a well-instrumented manner. This ability to tailor the beam characteristics for the target is particularly important as high power targets are developed which can handle very high beam currents.

Ultra-High Intensity Magnetic Field Generation in Dense Plasma

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisch, Nathaniel J.

2014-01-08

The main objective of this grant proposal was to explore the efficient generation of intense currents. Whereas the efficient generation of electric current in low-­energy-­density plasma has occupied the attention of the magnetic fusion community for several decades, scant attention has been paid to carrying over to high-­energy-­density plasma the ideas for steady-­state current drive developed for low-­energy-­density plasma, or, for that matter, to inventing new methodologies for generating electric current in high-­energy-­density plasma. What we proposed to do was to identify new mechanisms to accomplish current generation, and to assess the operation, physics, and engineering basis of new formsmore » of current drive in regimes appropriate for new fusion concepts.« less

The interaction between water currents and salmon swimming behaviour in sea cages.

PubMed

Johansson, David; Laursen, Frida; Fernö, Anders; Fosseidengen, Jan Erik; Klebert, Pascal; Stien, Lars Helge; Vågseth, Tone; Oppedal, Frode

2014-01-01

Positioning of sea cages at sites with high water current velocities expose the fish to a largely unknown environmental challenge. In this study we observed the swimming behaviour of Atlantic salmon (Salmo salar L.) at a commercial farm with tidal currents altering between low, moderate and high velocities. At high current velocities the salmon switched from the traditional circular polarized group structure, seen at low and moderate current velocities, to a group structure where all fish kept stations at fixed positions swimming against the current. This type of group behaviour has not been described in sea cages previously. The structural changes could be explained by a preferred swimming speed of salmon spatially restricted in a cage in combination with a behavioural plasticity of the fish.

Remote sensing of ocean currents using ERTS imagery

NASA Technical Reports Server (NTRS)

Maul, G. A.

1973-01-01

Major ocean currents such as the Loop Current in the eastern Gulf of Mexico have surface manifestations which can be exploited for remote sensing. Surface chlorophyll-a concentrations, which contribute to the shift in color from blue to green in the open sea, were found to have high spatial variability; significantly lower concentrations were observed in the current. The cyclonic edge of the current is an accumulation zone which causes a peak in chlorophyll concentration. The dynamics also cause surface concentrations of algae, which have a high reflectance in the near infrared. Combining these observations gives rise to an edge effect which can show up as a bright lineation on multispectral imagery delimiting the current's boundary under certain environmental conditions. When high seas introduce bubbles, white caps, and foam, the reflectance is dominated by scattering rather than absorption. This has been detected in ERTS imagery and used for current location.

Disruption of crystalline structure of Sn3.5Ag induced by electric current

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huang, Han-Chie; Lin, Kwang-Lung, E-mail: matkllin@mail.ncku.edu.tw; Wu, Albert T.

2016-03-21

This study presented the disruption of the Sn and Ag{sub 3}Sn lattice structures of Sn3.5Ag solder induced by electric current at 5–7 × 10{sup 3} A/cm{sup 2} with a high resolution transmission electron microscope investigation and electron diffraction analysis. The electric current stressing induced a high degree of strain on the alloy, as estimated from the X-ray diffraction (XRD) peak shift of the current stressed specimen. The XRD peak intensity of the Sn matrix and the Ag{sub 3}Sn intermetallic compound diminished to nearly undetectable after 2 h of current stressing. The electric current stressing gave rise to a high dislocation density ofmore » up to 10{sup 17}/m{sup 2}. The grain morphology of the Sn matrix became invisible after prolonged current stressing as a result of the coalescence of dislocations.« less

Design optimization of high frequency transformer with controlled leakage inductance for current fed dual active bridge converter

NASA Astrophysics Data System (ADS)

Jung, Tae-Uk; Kim, Myung-Hwan; Yoo, Jin-Hyung

2018-05-01

Current fed dual active bridge converters for photovoltaic generation may typically require a given leakage or extra inductance in order to provide proper control of the currents. Therefore, the many researches have been focused on the leakage inductance control of high frequency transformer to integrate an extra inductor. In this paper, an asymmetric winding arrangement to get the controlled leakage inductance for the high frequency transformer is proposed to improve the efficiency of the current fed dual active bridge converter. In order to accurate analysis, a coupled electromagnetic analysis model of transformer connected with high frequency switching circuit is used. A design optimization procedure for high efficiency is also presented using design analysis model, and it is verified by the experimental result.

Cathode performance during two beam operation of the high current high polarization electron gun for eRHIC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rahman, O.; Ben-Zvi, I.; Degen, C.

Two electron beams from two activated bulk GaAs photocathodes were successfully combined during the recent beam test of the High Current High Polarization Electron gun for eRHIC. The beam test took place in Stangenes Industries in Palo Alto, CA, where the cathodes were placed in diagonally opposite locations inside the high voltage shroud. No significant cross talking between the cathodes was found for the pertinent vacuum and low average current operation, which is very promising towards combining multiple beams for higher average current. This paper describes the cathode preparation, transport and cathode performance in the gun for the combining test,more » including the QE and lifetimes of the photocathodes at various steps of the experiment.« less

Current-voltage characteristics influenced by the nanochannel diameter and surface charge density in a fluidic field-effect-transistor.

PubMed

Singh, Kunwar Pal; Guo, Chunlei

2017-06-21

The nanochannel diameter and surface charge density have a significant impact on current-voltage characteristics in a nanofluidic transistor. We have simulated the effect of the channel diameter and surface charge density on current-voltage characteristics of a fluidic nanochannel with positive surface charge on its walls and a gate electrode on its surface. Anion depletion/enrichment leads to a decrease/increase in ion current with gate potential. The ion current tends to increase linearly with gate potential for narrow channels at high surface charge densities and narrow channels are more effective to control the ion current at high surface charge densities. The current-voltage characteristics are highly nonlinear for wide channels at low surface charge densities and they show different regions of current change with gate potential. The ion current decreases with gate potential after attaining a peak value for wide channels at low values of surface charge densities. At low surface charge densities, the ion current can be controlled by a narrow range of gate potentials for wide channels. The current change with source drain voltage shows ohmic, limiting and overlimiting regions.

Zener diode controls switching of large direct currents

NASA Technical Reports Server (NTRS)

1965-01-01

High-current zener diode is connected in series with the positive input terminal of a dc supply to block the flow of direct current until a high-frequency control signal is applied across the zener diode. This circuit controls the switching of large dc signals.

Gradient-Type Magnetoelectric Current Sensor with Strong Multisource Noise Suppression.

PubMed

Zhang, Mingji; Or, Siu Wing

2018-02-14

A novel gradient-type magnetoelectric (ME) current sensor operating in magnetic field gradient (MFG) detection and conversion mode is developed based on a pair of ME composites that have a back-to-back capacitor configuration under a baseline separation and a magnetic biasing in an electrically-shielded and mechanically-enclosed housing. The physics behind the current sensing process is the product effect of the current-induced MFG effect associated with vortex magnetic fields of current-carrying cables (i.e., MFG detection) and the MFG-induced ME effect in the ME composite pair (i.e., MFG conversion). The sensor output voltage is directly obtained from the gradient ME voltage of the ME composite pair and is calibrated against cable current to give the current sensitivity. The current sensing performance of the sensor is evaluated, both theoretically and experimentally, under multisource noises of electric fields, magnetic fields, vibrations, and thermals. The sensor combines the merits of small nonlinearity in the current-induced MFG effect with those of high sensitivity and high common-mode noise rejection rate in the MFG-induced ME effect to achieve a high current sensitivity of 0.65-12.55 mV/A in the frequency range of 10 Hz-170 kHz, a small input-output nonlinearity of <500 ppm, a small thermal drift of <0.2%/℃ in the current range of 0-20 A, and a high common-mode noise rejection rate of 17-28 dB from multisource noises.

Gradient-Type Magnetoelectric Current Sensor with Strong Multisource Noise Suppression

PubMed Central

2018-01-01

A novel gradient-type magnetoelectric (ME) current sensor operating in magnetic field gradient (MFG) detection and conversion mode is developed based on a pair of ME composites that have a back-to-back capacitor configuration under a baseline separation and a magnetic biasing in an electrically-shielded and mechanically-enclosed housing. The physics behind the current sensing process is the product effect of the current-induced MFG effect associated with vortex magnetic fields of current-carrying cables (i.e., MFG detection) and the MFG-induced ME effect in the ME composite pair (i.e., MFG conversion). The sensor output voltage is directly obtained from the gradient ME voltage of the ME composite pair and is calibrated against cable current to give the current sensitivity. The current sensing performance of the sensor is evaluated, both theoretically and experimentally, under multisource noises of electric fields, magnetic fields, vibrations, and thermals. The sensor combines the merits of small nonlinearity in the current-induced MFG effect with those of high sensitivity and high common-mode noise rejection rate in the MFG-induced ME effect to achieve a high current sensitivity of 0.65–12.55 mV/A in the frequency range of 10 Hz–170 kHz, a small input-output nonlinearity of <500 ppm, a small thermal drift of <0.2%/℃ in the current range of 0–20 A, and a high common-mode noise rejection rate of 17–28 dB from multisource noises. PMID:29443920

High-current-density electrodeposition using pulsed and constant currents to produce thick CoPt magnetic films on silicon substrates

NASA Astrophysics Data System (ADS)

Ewing, Jacob; Wang, Yuzheng; Arnold, David P.

2018-05-01

This paper investigates methods for electroplating thick (>20 μm), high-coercivity CoPt films using high current densities (up to 1 A/cm2) and elevated bath temperatures (70 °C). Correlations are made tying current-density and temperature process parameters with plating rate, elemental ratio and magnetic properties of the deposited CoPt films. It also investigates how pulsed currents can increase the plating rate and film to substrate adhesion. Using 500 mA/cm2 and constant current, high-quality, dense CoPt films were successfully electroplated up to 20 μm thick in 1 hr on silicon substrates (0.35 μm/min plating rate). After standard thermal treatment (675°C, 30 min) to achieve the ordered L10 crystalline phase, strong magnetic properties were measured: coercivities up 850 kA/m, remanences >0.5 T, and maximum energy products up to 46 kJ/m3.

Low pressure spark gap triggered by an ion diode

DOEpatents

Prono, Daniel S.

1985-01-01

Spark gap apparatus for use as an electric switch operating at high voltage, high current and high repetition rate. Mounted inside a housing are an anode, cathode and ion plate. An ionizable fluid is pumped through the chamber of the housing. A pulse of current to the ion plate causes ions to be emitted by the ion plate, which ions move into and ionize the fluid. Electric current supplied to the anode discharges through the ionized fluid and flows to the cathode. Current stops flowing when the current source has been drained. The ionized fluid recombines into its initial dielectric ionizable state. The switch is now open and ready for another cycle.

Low-pressure spark gap triggered by an ion diode

DOEpatents

Prono, D.S.

1982-08-31

Spark gap apparatus for use as an electric switch operating at high voltage, high current and high repetition rate. Mounted inside a housing are an anode, cathode and ion plate. An ionizable fluid is pumped through the chamber of the housing. A pulse of current to the ion plate causes ions to be emitted by the ion plate, which ions move into and ionize the fluid. Electric current supplied to the anode discharges through the ionized fluid and flows to the cathode. Current stops flowing when the current source has been drained. The ionized fluid recombines into its initial dielectric ionizable state. The switch is now open and ready for another cycle.

Study of DC Circuit Breaker of H2-N2 Mixture Gas for High Voltage

NASA Astrophysics Data System (ADS)

Shiba, Yuji; Morishita, Yukinaga; Kaneko, Shuhei; Okabe, Shigemitsu; Mizoguchi, Hitoshi; Yanabu, Satoru

Global warming caused by CO2 etc. is a field where the concern is very high. Especially, automobile emissions are problem for it. Therefore, the hybrid car is widely development and used recently. Hybrid car used electric power and gasoline. So, the car reduces CO2. Hybrid car has engine and motor. To rotate the motor, hybrid car has battery. This battery is large capacity. Therefore, the relay should interrupt high DC current for the switch of the motor and the engine. So, hybrid car used hydrogen gas filling relay We studied interruption test for the research of a basic characteristic of hydrogen gas. DC current has not current zero point. So, it is necessary to make the current zero by high arc voltage and forcible current zero point. The loss coefficient and arc voltage of hydrogen is high. Therefore, we studied interruption test for used high arc voltage. We studied interruption test and dielectric breakdown test of air, pure Hydrogen, and Hydrogen- nitrogen mixture gas. As a result, we realized H2-N2(80%-20%) is the best gas.

Separation and purification of hydrolyzable tannin from Geranium wilfordii Maxim by reversed-phase and normal-phase high-speed counter-current chromatography.

PubMed

Liu, Dan; Su, Zhiguo; Wang, Changhai; Gu, Ming; Xing, Siliang

2010-08-01

Three hydrolyzable tannins, geraniin, corilagin and gallic acid, main active components of Geranium wilfordii Maxim, have been separated and purified in one-step by both reversed-phase and normal-phase high-speed counter-current chromatography. Gallic acid, corilagin and geraniin were purified from 70% aqueous acetone extract of G. wilfordii Maxim with solvent system n-hexane-ethyl acetate-methanol-acetic acid-water (1:10:0.2:0.2:20) by reversed-phase high-speed counter-current chromatography at purities of 94.2, 91.0 and 91.3%, at yields of 89.3, 82.9 and 91.7%, respectively. Gallic acid, corilagin and geraniin were purified with solvent system n-hexane-ethyl acetate-methanol-acetic acid-water (0.2:10:2:1:5) by normal-phase high-speed counter-current chromatography at purities of 85.9, 92.2 and 87.6%, at yields of 87.4, 94.6 and 94.3%, respectively. It was successful for both reversed-phase and normal-phase high-speed counter-current chromatography to separate high-polarity of low-molecular-weight substances.

Integrated modeling of high βN steady state scenario on DIII-D

DOE PAGES

Park, Jin Myung; Ferron, J. R.; Holcomb, Christopher T.; ...

2018-01-10

Theory-based integrated modeling validated against DIII-D experiments predicts that fully non-inductive DIII-D operation with β N > 4.5 is possible with certain upgrades. IPS-FASTRAN is a new iterative numerical procedure that integrates models of core transport, edge pedestal, equilibrium, stability, heating, and current drive self-consistently to find steady-state ( d/dt = 0) solutions and reproduces most features of DIII-D high β N discharges with a stationary current profile. Projecting forward to scenarios possible on DIII-D with future upgrades, the high q min > 2 scenario achieves stable operation at β N as high as 5 by using a very broadmore » current density profile to improve the ideal-wall stabilization of low- n instabilities along with confinement enhancement from low magnetic shear. This modeling guides the necessary upgrades of the heating and current drive system to realize reactor-relevant high β N steady-state scenarios on DIII-D by simultaneous optimization of the current and pressure profiles.« less

Integrated modeling of high βN steady state scenario on DIII-D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Jin Myung; Ferron, J. R.; Holcomb, Christopher T.

Theory-based integrated modeling validated against DIII-D experiments predicts that fully non-inductive DIII-D operation with β N > 4.5 is possible with certain upgrades. IPS-FASTRAN is a new iterative numerical procedure that integrates models of core transport, edge pedestal, equilibrium, stability, heating, and current drive self-consistently to find steady-state ( d/dt = 0) solutions and reproduces most features of DIII-D high β N discharges with a stationary current profile. Projecting forward to scenarios possible on DIII-D with future upgrades, the high q min > 2 scenario achieves stable operation at β N as high as 5 by using a very broadmore » current density profile to improve the ideal-wall stabilization of low- n instabilities along with confinement enhancement from low magnetic shear. This modeling guides the necessary upgrades of the heating and current drive system to realize reactor-relevant high β N steady-state scenarios on DIII-D by simultaneous optimization of the current and pressure profiles.« less

Integrated modeling of high βN steady state scenario on DIII-D

NASA Astrophysics Data System (ADS)

Park, J. M.; Ferron, J. R.; Holcomb, C. T.; Buttery, R. J.; Solomon, W. M.; Batchelor, D. B.; Elwasif, W.; Green, D. L.; Kim, K.; Meneghini, O.; Murakami, M.; Snyder, P. B.

2018-01-01

Theory-based integrated modeling validated against DIII-D experiments predicts that fully non-inductive DIII-D operation with βN > 4.5 is possible with certain upgrades. IPS-FASTRAN is a new iterative numerical procedure that integrates models of core transport, edge pedestal, equilibrium, stability, heating, and current drive self-consistently to find steady-state (d/dt = 0) solutions and reproduces most features of DIII-D high βN discharges with a stationary current profile. Projecting forward to scenarios possible on DIII-D with future upgrades, the high qmin > 2 scenario achieves stable operation at βN as high as 5 by using a very broad current density profile to improve the ideal-wall stabilization of low-n instabilities along with confinement enhancement from low magnetic shear. This modeling guides the necessary upgrades of the heating and current drive system to realize reactor-relevant high βN steady-state scenarios on DIII-D by simultaneous optimization of the current and pressure profiles.

Relationship of the interplanetary electric field to the high-latitude ionospheric electric field and currents Observations and model simulation

NASA Technical Reports Server (NTRS)

Clauer, C. R.; Banks, P. M.

1986-01-01

The electrical coupling between the solar wind, magnetosphere, and ionosphere is studied. The coupling is analyzed using observations of high-latitude ion convection measured by the Sondre Stromfjord radar in Greenland and a computer simulation. The computer simulation calculates the ionospheric electric potential distribution for a given configuration of field-aligned currents and conductivity distribution. The technique for measuring F-region in velocities at high time resolution over a large range of latitudes is described. Variations in the currents on ionospheric plasma convection are examined using a model of field-aligned currents linking the solar wind with the dayside, high-latitude ionosphere. The data reveal that high-latitude ionospheric convection patterns, electric fields, and field-aligned currents are dependent on IMF orientation; it is observed that the electric field, which drives the F-region plasma curve, responds within about 14 minutes to IMF variations in the magnetopause. Comparisons of the simulated plasma convection with the ion velocity measurements reveal good correlation between the data.

Multi-species genetic connectivity in a terrestrial habitat network.

PubMed

Marrotte, Robby R; Bowman, Jeff; Brown, Michael G C; Cordes, Chad; Morris, Kimberley Y; Prentice, Melanie B; Wilson, Paul J

2017-01-01

Habitat fragmentation reduces genetic connectivity for multiple species, yet conservation efforts tend to rely heavily on single-species connectivity estimates to inform land-use planning. Such conservation activities may benefit from multi-species connectivity estimates, which provide a simple and practical means to mitigate the effects of habitat fragmentation for a larger number of species. To test the validity of a multi-species connectivity model, we used neutral microsatellite genetic datasets of Canada lynx ( Lynx canadensis ), American marten ( Martes americana ), fisher ( Pekania pennanti ), and southern flying squirrel ( Glaucomys volans ) to evaluate multi-species genetic connectivity across Ontario, Canada. We used linear models to compare node-based estimates of genetic connectivity for each species to point-based estimates of landscape connectivity (current density) derived from circuit theory. To our knowledge, we are the first to evaluate current density as a measure of genetic connectivity. Our results depended on landscape context: habitat amount was more important than current density in explaining multi-species genetic connectivity in the northern part of our study area, where habitat was abundant and fragmentation was low. In the south however, where fragmentation was prevalent, genetic connectivity was correlated with current density. Contrary to our expectations however, locations with a high probability of movement as reflected by high current density were negatively associated with gene flow. Subsequent analyses of circuit theory outputs showed that high current density was also associated with high effective resistance, underscoring that the presence of pinch points is not necessarily indicative of gene flow. Overall, our study appears to provide support for the hypothesis that landscape pattern is important when habitat amount is low. We also conclude that while current density is proportional to the probability of movement per unit area, this does not imply increased gene flow, since high current density tends to be a result of neighbouring pixels with high cost of movement (e.g., low habitat amount). In other words, pinch points with high current density appear to constrict gene flow.

Performance of the NASA Digitizing Core-Loss Instrumentation

NASA Technical Reports Server (NTRS)

Schwarze, Gene E. (Technical Monitor); Niedra, Janis M.

2003-01-01

The standard method of magnetic core loss measurement was implemented on a high frequency digitizing oscilloscope in order to explore the limits to accuracy when characterizing high Q cores at frequencies up to 1 MHz. This method computes core loss from the cycle mean of the product of the exciting current in a primary winding and induced voltage in a separate flux sensing winding. It is pointed out that just 20 percent accuracy for a Q of 100 core material requires a phase angle accuracy of 0.1 between the voltage and current measurements. Experiment shows that at 1 MHz, even high quality, high frequency current sensing transformers can introduce phase errors of a degree or more. Due to the fact that the Q of some quasilinear core materials can exceed 300 at frequencies below 100 kHz, phase angle errors can be a problem even at 50 kHz. Hence great care is necessary with current sensing and ground loops when measuring high Q cores. Best high frequency current sensing accuracy was obtained from a fabricated 0.1-ohm coaxial resistor, differentially sensed. Sample high frequency core loss data taken with the setup for a permeability-14 MPP core is presented.

High-frequency high-voltage high-power DC-to-DC converters

NASA Technical Reports Server (NTRS)

Wilson, T. G.; Owen, H. A.; Wilson, P. M.

1982-01-01

A simple analysis of the current and voltage waveshapes associated with the power transistor and the power diode in an example current-or-voltage step-up (buck-boost) converter is presented. The purpose of the analysis is to provide an overview of the problems and design trade-offs which must be addressed as high-power high-voltage converters are operated at switching frequencies in the range of 100 kHz and beyond. Although the analysis focuses on the current-or-voltage step-up converter as the vehicle for discussion, the basic principles presented are applicable to other converter topologies as well.

High-frequency high-voltage high-power DC-to-DC converters

NASA Astrophysics Data System (ADS)

Wilson, T. G.; Owen, H. A.; Wilson, P. M.

1982-09-01

A simple analysis of the current and voltage waveshapes associated with the power transistor and the power diode in an example current-or-voltage step-up (buck-boost) converter is presented. The purpose of the analysis is to provide an overview of the problems and design trade-offs which must be addressed as high-power high-voltage converters are operated at switching frequencies in the range of 100 kHz and beyond. Although the analysis focuses on the current-or-voltage step-up converter as the vehicle for discussion, the basic principles presented are applicable to other converter topologies as well.

Detection of High-impedance Arcing Faults in Radial Distribution DC Systems

NASA Technical Reports Server (NTRS)

Gonzalez, Marcelo C.; Button, Robert M.

2003-01-01

High voltage, low current arcing faults in DC power systems have been researched at the NASA Glenn Research Center in order to develop a method for detecting these 'hidden faults', in-situ, before damage to cables and components from localized heating can occur. A simple arc generator was built and high-speed and low-speed monitoring of the voltage and current waveforms, respectively, has shown that these high impedance faults produce a significant increase in high frequency content in the DC bus voltage and low frequency content in the DC system current. Based on these observations, an algorithm was developed using a high-speed data acquisition system that was able to accurately detect high impedance arcing events induced in a single-line system based on the frequency content of the DC bus voltage or the system current. Next, a multi-line, radial distribution system was researched to see if the arc location could be determined through the voltage information when multiple 'detectors' are present in the system. It was shown that a small, passive LC filter was sufficient to reliably isolate the fault to a single line in a multi-line distribution system. Of course, no modification is necessary if only the current information is used to locate the arc. However, data shows that it might be necessary to monitor both the system current and bus voltage to improve the chances of detecting and locating high impedance arcing faults

Enhanced critical currents in (Gd,Y)Ba2Cu3Ox superconducting tapes with high levels of Zr addition

NASA Astrophysics Data System (ADS)

Selvamanickam, V.; Chen, Y.; Shi, T.; Liu, Y.; Khatri, N. D.; Liu, J.; Yao, Y.; Xiong, X.; Lei, C.; Soloveichik, S.; Galstyan, E.; Majkic, G.

2013-03-01

The critical current and structural properties of (Gd,Y)BaCuO tapes made by metal organic chemical vapor deposition (MOCVD) with Zr addition levels up to 30 at.% have been investigated. The reduction in critical current beyond the previously optimized Zr addition level of 7.5 at.% was found to be due to structural deterioration of the (Gd,Y)Ba2Cu3Ox film. By a modified MOCVD process, enhanced critical current densities have been achieved with high levels of Zr addition, including 3.83 MA cm-2 in 15 at.% Zr-added 1.1 μm thick film at 77 K in zero magnetic field. Critical currents as high as 1072 A/12 mm have been reached in (Gd,Y)BaCuO tapes with 15 at.% Zr addition at 30 K in a field of 3 T applied perpendicular to the tape, corresponding to a pinning force value of 268 GN m-3. The enhanced critical currents achievable with a high density of nanoscale defects by employing high levels of second-phase additions enable the performance targets needed for the use of HTS tapes in coil applications involving high magnetic fields at temperatures below 50 K to be met.

Liquid Nitrogen as Fast High Voltage Switching Medium

NASA Astrophysics Data System (ADS)

Dickens, J.; Neuber, A.; Haustein, M.; Krile, J.; Krompholz, H.

2002-12-01

Compact pulsed power systems require new switching technologies. For high voltages, liquid nitrogen seems to be a suitable switching medium, with high hold-off voltage, low dielectric constant, and no need for pressurized systems as in high pressure gas switches. The discharge behavior in liquid nitrogen, such as breakdown voltages, formative times, current rise as function of voltage, recovery, etc. are virtually unknown, however. The phenomenology of breakdown in liquid nitrogen is investigated with high speed (temporal resolution < 1 ns) electrical and optical diagnostics, in a coaxial system with 50-Ohm impedance. Discharge current and voltage are determined with transmission line type current sensors and capacitive voltage dividers. The discharge luminosity is measured with photomultiplier tubes. Preliminary results of self-breakdown investigations (gap 1 mm, breakdown voltage 44 kV, non-boiling supercooled nitrogen) show a fast (2 ns) transition from an unknown current level to several mA, a long-duration (100 ns) phase with constant current superimposed by ns-spikes, and a final fast transition to the impedance limited current during several nanoseconds. The optical measurements will be expanded toward spectroscopy and high speed photography with the aim of clarifying the overall breakdown mechanisms, including electronic initiation, bubble formation, bubble dynamics, and their role in breakdown, for different electrode geometries (different macroscopic field enhancements).

Using a 1200 kHz workhorse ADCP with mode 12 to measure near bottom mean currents

USGS Publications Warehouse

Martini, M.; ,

2003-01-01

Using high frequency Acoustic Doppler Current (ADCP) profiling technology, it is possible to make high-resolution measurements of mean current profiles within a few meters of the seabed. In coastal applications, mean current speeds may be 10 cm/s or less, and oscillatory wave currents may exceed 100 cm/s during storm events. To resolve mean flows of 10 cm/s or less under these conditions, accuracies of 1 cm/s or better are desirable.

Strategic and Operational Plan for Integrating Transcriptomics ...

EPA Pesticide Factsheets

Plans for incorporating high throughput transcriptomics into the current high throughput screening activities at NCCT; the details are in the attached slide presentation presentation on plans for incorporating high throughput transcriptomics into the current high throughput screening activities at NCCT, given at the OECD meeting on June 23, 2016

Biomass burning smoke episodes in Finland from Eastern European wildfires

NASA Astrophysics Data System (ADS)

Leino, Katri E.; Riuttanen, Laura; Nieminen, Tuomo; Dal Maso, Miikka; Väänänen, Riikka; Pohja, Toivo; Keronen, Petri; Järvi, Leena; Aalto, Pasi P.; Virkkula, Aki; Kerminen, Veli-Matti; Petäjä, Tuukka; Kulmala, Markku

2014-05-01

Biomass burning emissions from Eastern Europe are occasionally observed in Finland. In spring of 2006 and the late summers of 2006 and 2010, smoke plumes were transported to large parts of Finland. By combining multiple methods we were able to study the horizontal and vertical properties of long-range transported smoke plume, as well as time evolution of particle number size distributions in an aged biomass burning smoke. In this study we used trace gas and aerosol particle number size distribution measurements at three SMEAR stations (Station for Measuring Forest Ecosystem - Atmosphere Relations; Ruuskanen et al., 2003; Hari & Kulmala, 2005; Järvi et al., 2009). Vertical distribution of the smoke was studied by a small aircraft, Cessna FR172F, instrumented with Ultrafine Condensation Particle Counter and CO2/H2O -gas analyser. The airborne measurements were compared with vertical profiles from a polarization-sensitive, two-wavelength lidar (CALIOP; the Cloud-Aerosol Lidar with Orthogonal Polarization; Winker et al., 2009) onboard the CALIPSO satellite (the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation). HYSPLIT 4 (Hybrid Single Particle Lagrangian Integrated Trajectory Model; Draxler, 1999) backward trajectories as well as MODIS (Moderate Resolution Imaging Spectroradiometer) Terra thermal anomalies data (MOD14A1) were used together with synoptic analyses to study the transport and the horizontal distribution of the smoke. In the spring 2006, there was a blocking high pressure system in Eastern Europe and smoke from the Eastern European fires was transported far to the north-west. The smoke episode in Finland lasted for two weeks. In summers of 2006 and 2010 the smoke came to Finland in a warm sector of a low-pressure system and the episodes lasted for less than two days. Smoke plumes had elevated concentrations of aerosol particles, black carbon and CO, and varying concentrations of CO2, SO2, O3 and NOx. The difference to the background air was clear. At least one of the smoke plumes had a layered structure, and the smoke plumes were observed to be vertically and horizontally inhomogeneous. Aerosol number size distributions peaked at 100-200 nm size, median particle size being 60-250 % larger than in July-August on average. Growth of aerosol particles in the aged smoke plume was observed. References: Draxler R. R. (1999). HYSPLIT4 user's guide. NOAA Tech. Memo. ERL ARL-230. Hari P. & Kulmala M. (2005). Boreal Environ. Res. 10, 315-322. Järvi L. et al. (2009). Boreal Environ. Res. 14, 86-109. Ruuskanen T. M. et al. (2003). Boreal. Environ. Res., 8, 335-349. Winker D. M. et al. (2009). J. Atmos. Oceanic Technol., 26, 2310-2323.

High electric field conduction in low-alkali boroaluminosilicate glass

NASA Astrophysics Data System (ADS)

Dash, Priyanka; Yuan, Mengxue; Gao, Jun; Furman, Eugene; Lanagan, Michael T.

2018-02-01

Electrical conduction in silica-based glasses under a low electric field is dominated by high mobility ions such as sodium, and there is a transition from ionic transport to electronic transport as the electric field exceeds 108 V/m at low temperatures. Electrical conduction under a high electric field was investigated in thin low-alkali boroaluminosilicate glass samples, showing nonlinear conduction with the current density scaling approximately with E1/2, where E is the electric field. In addition, thermally stimulated depolarization current (TSDC) characterization was carried out on room-temperature electrically poled glass samples, and an anomalous discharging current flowing in the same direction as the charging current was observed. High electric field conduction and TSDC results led to the conclusion that Poole-Frenkel based electronic transport occurs in the mobile-cation-depleted region adjacent to the anode, and accounts for the observed anomalous current.

High-frequency large-amplitude oscillations of a non-isothermal N/S boundary

NASA Astrophysics Data System (ADS)

Bezuglyj, A. I.; Shklovskij, V. A.

2016-10-01

Within the framework of a phenomenological approach based on the heat balance equation and the current dependence of the critical temperature of the superconductor, the effect of high-frequency current of large amplitude and arbitrary waveform on the non-isothermal balance of an oscillating N/S interface in a long superconductor was studied. Self-consistent average temperature field of the rapidly oscillating non-isothermal N/S boundary (heat kink) was introduced, which allowed us to go beyond the well-known concept of mean-square heating and consider the effect of the current waveform. With regard to experiments on the effects of high-power microwave radiation on the current-voltage (IV) characteristics of superconducting films, their classification was performed and the families of IV curves of inhomogeneous superconductors carrying a current containing a high-frequency component of large amplitude. Several IV curves exhibited a hysteresis of thermal nature.

Adherence to guidelines for cardiovascular screening in current high school preparticipation evaluation forms.

PubMed

Rausch, Christopher M; Phillips, George C

2009-10-01

We compared the content of the cardiac screening questions on US state high school athletic association preparticipation evaluation forms with current consensus recommendations. We reviewed the high school athletic association's approved, recommended, or required sports preparticipation form from each of the 50 US states and the District of Columbia, and compared the content of the personal and family history components with current recommendations for cardiac screening questions. We found that 85% of the preparticipation forms in current use contain all elements of the formerly recommended guidelines, but only 17% contain all elements of the new consensus guidelines. We conclude that although there appears to be some improvement in the content of the preparticipation forms in current use compared with previous studies, the vast majority of these forms are incomplete compared with current consensus guidelines.

Positive temperature coefficient thermistors based on carbon nanotube/polymer composites

PubMed Central

Zeng, You; Lu, Guixia; Wang, Han; Du, Jinhong; Ying, Zhe; Liu, Chang

2014-01-01

In order to explore availability of carbon nanotube (CNT)-based positive temperature coefficient (PTC) thermistors in practical application, we prepared carbon nanotube (CNT) filled high density polyethylene (HDPE) composites by using conventional melt-mixing methods, and investigated their PTC effects in details. The CNT-based thermistors exhibit much larger hold current and higher hold voltage, increasing by 129% in comparison with the commercial carbon black (CB) filled HDPE thermistors. Such high current-bearing and voltage-bearing capacity for the CNT/HDPE thermistors is mainly attributed to high thermal conductivity and heat dissipation of entangled CNT networks. Moreover, the CNT/HDPE thermistors exhibit rapid electrical response to applied voltages, comparable to commercial CB-based thermistors. In light of their high current-bearing capacity and quick response, the CNT-based thermistors have great potential to be used as high-performance thermistors in practical application, especially in some critical circumstances of high temperature, large applied currents, and high applied voltages. PMID:25327951

Theory and application of high temperature superconducting eddy current probes for nondestructive evaluation

NASA Astrophysics Data System (ADS)

Claycomb, James Ronald

1998-10-01

Several High-T c Superconducting (HTS) eddy current probes have been developed for applications in electromagnetic nondestructive evaluation (NDE) of conducting materials. The probes utilize high-T c SUperconducting Quantum Interference Device (SQUID) magnetometers to detect the fields produced by the perturbation of induced eddy currents resulting from subsurface flaws. Localized HTS shields are incorporated to selectively screen out environmental electromagnetic interference and enable movement of the instrument in the Earth's magnetic field. High permeability magnetic shields are employed to focus flux into, and thereby increase the eddy current density in the metallic test samples. NDE test results are presented, in which machined flaws in aluminum alloy are detected by probes of different design. A novel current injection technique performing NDE of wires using SQUIDs is also discussed. The HTS and high permeability shields are designed based on analytical and numerical finite element method (FEM) calculations presented here. Superconducting and high permeability magnetic shields are modeled in uniform noise fields and in the presence of dipole fields characteristic of flaw signals. Several shield designs are characterized in terms of (1) their ability to screen out uniform background noise fields; (2) the resultant improvement in signal-to-noise ratio and (3) the extent to which dipole source fields are distorted. An analysis of eddy current induction is then presented for low frequency SQUID NDE. Analytical expressions are developed for the induced eddy currents and resulting magnetic fields produced by excitation sources above conducting plates of varying thickness. The expressions derived here are used to model the SQUID's response to material thinning. An analytical defect model is also developed, taking into account the attenuation of the defect field through the conducting material, as well as the current flow around the edges of the flaw. Time harmonic FEM calculations are then used to model the electromagnetic response of eight probe designs, consisting of an eddy current drive coil coupled to a SQUID surrounded by superconducting and/or high permeability magnetic shielding. Simulations are carried out with the eddy current probes located a finite distance above a conducting surface. Results are quantified in terms of shielding and focus factors for each probe design.

Electropneumatic rheostat regulates high current

NASA Technical Reports Server (NTRS)

Haacker, J. F.; Jedlicka, J. R.; Wagoner, C. B.

1965-01-01

Electropneumatic rheostat maintains a constant direct current in each of several high-power parallel loads, of variable resistance, across a single source. It provides current regulation at any preset value by dissipating the proper amount of energy thermally, and uses a column of mercury to vary the effective length of a resistance element.

76 FR 38072 - Airworthiness Directives; The Boeing Company Model 777 Airplanes

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-29

... above. This proposed AD would require repetitive detailed inspection and high frequency eddy current... high frequency eddy current (HFEC) inspection for cracks in the WCS web pockets of spanwise beams... = 160 frequency eddy current inspection per hour = $4,250 inspection cycle. airplanes x $4,250 of...

High current polarized electron source for future eRHIC

NASA Astrophysics Data System (ADS)

Wang, Erdong

2018-05-01

The high current and high bunch charge polarized electron source is essential for cost reduction of Linac-Ring (L-R) eRHIC. In the baseline design, electron beam from multiple guns (probably 4-8) will be combined using deflection plates or accumulate ring. Each gun aims to deliver electron beam with 10 mA average current and 5.3 nC bunch charge. With total 50 mA and 5.3 nC electron beam, this beam combining design could use for generating positron too. The gun has been designed, fabricated and expected to start commissioning by the mid of this year. In this paper, we will present the DC gun design parameters and beam combine schemes. Also, we will describe the details of gun design and the strategies to demonstrate high current high charge polarized electron beam from this source.

Second-Generation High-Temperature Superconductor Wires for the Electric Power Grid

NASA Astrophysics Data System (ADS)

Malozemoff, A. P.

2012-08-01

Superconductors offer major advantages for the electric power grid, including high current and power capacity, high efficiency arising from the lossless current flow, and a unique current-limiting functionality arising from a superconductor-to-resistive transition. These advantages can be brought to bear on equipment such as underground power cables, fault current limiters, rotating machinery, transformers, and energy storage. The first round of significant commercial-scale superconductor power-equipment demonstrations, carried out during the past decade, relied on a first-generation high-temperature superconductor (HTS) wire. However, during the past few years, with the recent commercial availability of high-performance second-generation HTS wires, power-equipment demonstrations have increasingly been carried out with these new wires, which bring important advantages. The foundation is being laid for commercial expansion of this important technology into the power grid.

High PRF high current switch

DOEpatents

Moran, Stuart L.; Hutcherson, R. Kenneth

1990-03-27

A triggerable, high voltage, high current, spark gap switch for use in pu power systems. The device comprises a pair of electrodes in a high pressure hydrogen environment that is triggered by introducing an arc between one electrode and a trigger pin. Unusually high repetition rates may be obtained by undervolting the switch, i.e., operating the trigger at voltages much below the self-breakdown voltage of the device.

Study of Electromagnetic Repulsion Switch to High Speed Reclosing and Recover Time Characteristics of Superconductor

NASA Astrophysics Data System (ADS)

Koyama, Tomonori; Kaiho, Katsuyuki; Yamaguchi, Iwao; Yanabu, Satoru

Using a high-temperature superconductor, we constructed and tested a model superconducting fault current limiter (SFCL). The superconductor and vacuum interrupter as the commutation switch were connected in parallel using a bypass coil. When the fault current flows in this equipment, the superconductor is quenched and the current is then transferred to the parallel coil due to the voltage drop in the superconductor. This large current in the parallel coil actuates the magnetic repulsion mechanism of the vacuum interrupter and the current in the superconductor is broken. Using this equipment, the current flow time in the superconductor can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of the parallel coil. This system has many merits. So, we introduced to electromagnetic repulsion switch. There is duty of high speed re-closing after interrupting fault current in the electrical power system. So the SFCL should be recovered to superconducting state before high speed re-closing. But, superconductor generated heat at the time of quench. It takes time to recover superconducting state. Therefore it is a matter of recovery time. In this paper, we studied recovery time of superconductor. Also, we proposed electromagnetic repulsion switch with reclosing system.

Coaxial test fixture

DOEpatents

Praeg, W.F.

1984-03-30

This invention pertains to arrangements for performing electrical tests on contact material samples, and in particular for testing contact material test samples in an evacuated environment under high current loads. Frequently, it is desirable in developing high-current separable contact material, to have at least a preliminary analysis of selected candidate conductor materials. Testing of material samples will hopefully identify materials unsuitable for high current electrical contact without requiring incorporation of the materials into a completed and oftentimes complex structure.

Algorithm for evaluating the effectiveness of a high-rise development project based on current yield

NASA Astrophysics Data System (ADS)

Soboleva, Elena

2018-03-01

The article is aimed at the issues of operational evaluation of development project efficiency in high-rise construction under the current economic conditions in Russia. The author touches the following issues: problems of implementing development projects, the influence of the operational evaluation quality of high-rise construction projects on general efficiency, assessing the influence of the project's external environment on the effectiveness of project activities under crisis conditions and the quality of project management. The article proposes the algorithm and the methodological approach to the quality management of the developer project efficiency based on operational evaluation of the current yield efficiency. The methodology for calculating the current efficiency of a development project for high-rise construction has been updated.

High breakdown voltage and high driving current in a novel silicon-on-insulator MESFET with high- and low-resistance boxes in the drift region

NASA Astrophysics Data System (ADS)

Naderi, Ali; Mohammadi, Hamed

2018-06-01

In this paper a novel silicon-on-insulator metal oxide field effect transistor (SOI-MESFET) with high- and low-resistance boxes (HLRB) is proposed. This structure increases the current and breakdown voltage, simultaneously. The semiconductor at the source side of the channel is doped with higher impurity than the other parts to reduce its resistance and increase the driving current as low-resistance box. An oxide box is implemented at the upper part of the channel from the drain region toward the middle of the channel as the high-resistance box. Inserting a high-resistance box increases the breakdown voltage and improves the RF performance of the device because of its higher tolerable electric field and modification in gate-drain capacitance, respectively. The high-resistance region reduces the current density of the device which is completely compensated by low-resistance box. A 92% increase in breakdown voltage and an 11% improvement in the device current have been obtained. Also, maximum oscillation frequency, unilateral power gain, maximum available gain, maximum stable gain, and maximum output power density are improved by 7%, 35%, 23%, 26%, and 150%, respectively. These results show that the HLRB-SOI-MESFET can be considered as a candidate to replace Conventional SOI-MESFET (C-SOI-MESFET) for high-voltage and high-frequency applications.

A power-balance model for local helicity injection startup in a spherical tokamak

DOE Office of Scientific and Technical Information (OSTI.GOV)

Barr, Jayson L.; Bongard, Michael W.; Burke, Marcus G.

A 0D circuit model for predicting I p( t) in Local Helicity Injection (LHI) discharges is developed. Analytic formulas for estimating the surface flux of finite-A plasmas developed are modified and expanded to treat highly shaped, ultralow-A tokamak geometry using a database of representative equilibria. Model predictions are compared to sample LHI discharges in the A ~ 1 Pegasus spherical tokamak, and are found to agree within 15% of experimental I p( t). High performance LHI discharges are found to follow the Taylor relaxation current limit for approximately the first half of the current ramp, or I p ≲ 75more » kA. The second half of the current ramp follows a limit imposed by power-balance as plasmas expand from high- A to ultralow- A. Here, this shape evolution generates a significant drop in external plasma inductance, effectively using the plasma’s initially high inductance to drive the current ramp and provide > 70% of the current drive V-s. Projections using this model indicate the relative influences of higher helicity input rate and injector current on the attainable total plasma current.« less

A power-balance model for local helicity injection startup in a spherical tokamak

DOE PAGES

Barr, Jayson L.; Bongard, Michael W.; Burke, Marcus G.; ...

2018-05-15

A 0D circuit model for predicting I p( t) in Local Helicity Injection (LHI) discharges is developed. Analytic formulas for estimating the surface flux of finite-A plasmas developed are modified and expanded to treat highly shaped, ultralow-A tokamak geometry using a database of representative equilibria. Model predictions are compared to sample LHI discharges in the A ~ 1 Pegasus spherical tokamak, and are found to agree within 15% of experimental I p( t). High performance LHI discharges are found to follow the Taylor relaxation current limit for approximately the first half of the current ramp, or I p ≲ 75more » kA. The second half of the current ramp follows a limit imposed by power-balance as plasmas expand from high- A to ultralow- A. Here, this shape evolution generates a significant drop in external plasma inductance, effectively using the plasma’s initially high inductance to drive the current ramp and provide > 70% of the current drive V-s. Projections using this model indicate the relative influences of higher helicity input rate and injector current on the attainable total plasma current.« less

The Origin of the Tsushima Warm Current in a High Resolution Model

NASA Astrophysics Data System (ADS)

Park, Y.; Yeh, S.; Hwang, J.

2008-12-01

Using a high resolution global ocean circulation model results, the present study investigates the origin of the Tsushima Warm Current and related East China Sea Circulation. The simulated Tsushima Warm Current is weaker than the observations by about 30 %, but the persistence of the Taiwan-Tsushima Current System shows that the Taiwan Warm Current is the main source of the Tsushima Warm Current. The high resolution model results allow us to distinguish the Kuroshio intrusion north of Taiwan and west of Kyushu from the Taiwan-Tsushima Current System. West of Kyushu the onshore intrusion of the Kuroshio is strong between September and February, and north of Taiwan between June and November. The annual mean strength of the intrusion is 0.32 Sv west of Kyushu, and 0.22 Sv north of Taiwan. Since the simulated Tsushima Warm Current is weaker than the observation while that of the Taiwan Current is comparable to the observations, the strength of the intrusion is weaker than the reality. In addition, a linear relation is found between the transport of the Tsushima Warm Current and the sea level difference between the Korea/Tsushima Strait and the Tsugaru/Soya Straits, and we can conclude that the sea level difference is the main driving force of the current.

Weakening of ion-channel interactions of Na+ and Li+ in acetylcholine-receptor channels of frog skeletal muscle with an increase in agonist concentration.

PubMed

Manthey, A A

1998-05-01

The possibility that increases in agonist concentration beyond threshold levels may force changes in the character of high-conductance open states of skeletal muscle nicotinic acetylcholine receptor channels (nAChR) was examined by seeing whether differences in several critical ionic properties of nAChR currents could be detected with changes in agonist level. Single- and bi-ionic whole-cell currents of Na+ and Li+ in voltage-clamped frog (Rana pipiens) muscle fibers were measured during local superfusion of endplates with carbamylcholine (carb) at concentrations of 54 microm (low-carb) and 270 microM (high-carb). Three ionic properties that would be affected by changes in the open-state configuration of channel subunits were tested. First, ion-saturation characteristics. Peak Na+ and Li+ currents in low-carb trials showed sublinear dependence on ion concentrations from 0 to 60 mM with Km values of 78 (Na+) and 49 (Li+) mM and a power function slope of 0. 75 on double-log plot. In contrast, the concentration dependence of Na+ and Li+ currents in high-carb tests was linear through the origin with a power function slope of 1.02. Second, Na+/Li+ selectivity. The ratio of peak Na+ and Li+ currents in low-carb tests varied from 1.86 to 2.28 for ion concentrations of from 20 to 60 mM [mean = 2.02 +/- 0.06 (SEM)] whereas the ratio for high-carb trials ranged from only 1.29 to 1.52 [mean = 1.42 +/- 0.40 (SEM)]. Third, competitive interactions of Na+ and Li+ currents. Equimolar mixtures of Na+ and Li+ in low-carb tests produced bi-ionic inward currents which were never larger than the single-ion Na+ current alone, but bi-ionic currents at the high-carb level were always greater than the single-ion Na+ current, approximating the sum of the single-ion Na+ and Li+ currents in most cases. The results are consistent with a decrease in ion-channel binding at the high-carb level and support the possibility of agonist-induced changes in the high-conductance open-state configuration of nAChR subunits which result in a weakening of constraints on cation movements through the channel.

DEVELOPMENT OF A HIGH-TEMPERATURE/HIGH-PRESSURE ELECTROSTATIC PRECIPITATOR

EPA Science Inventory

The report gives results of a laboratory test demonstrating the feasibility of electrostatic precipitation at high temperatures (to 1366 K) and pressures (to 3550 kPa): corona currents were stable at all temperatures. Detailed current/voltage characteristics under negative and po...