Data Analyses and Modelling for Risk Based Monitoring of Mycotoxins in Animal Feed
van der Fels-Klerx, H.J. (Ine); Adamse, Paulien; Punt, Ans; van Asselt, Esther D.
2018-01-01
Following legislation, European Member States should have multi-annual control programs for contaminants, such as for mycotoxins, in feed and food. These programs need to be risk based implying the checks are regular and proportional to the estimated risk for animal and human health. This study aimed to prioritize feed products in the Netherlands for deoxynivalenol and aflatoxin B1 monitoring. Historical mycotoxin monitoring results from the period 2007–2016 were combined with data from other sources. Based on occurrence, groundnuts had high priority for aflatoxin B1 monitoring; some feed materials (maize and maize products and several oil seed products) and complete/complementary feed excluding dairy cattle and young animals had medium priority; and all other animal feeds and feed materials had low priority. For deoxynivalenol, maize by-products had a high priority, complete and complementary feed for pigs had a medium priority and all other feed and feed materials a low priority. Also including health consequence estimations showed that feed materials that ranked highest for aflatoxin B1 included sunflower seed and palmkernel expeller/extracts and maize. For deoxynivalenol, maize products were ranked highest, followed by various small grain cereals (products); all other feed materials were of lower concern. Results of this study have proven to be useful in setting up the annual risk based control program for mycotoxins in animal feed and feed materials. PMID:29373559
Study of Using Excess Stock to Reduce Naval Aviation Depot-Level Repairable Piece Part Backorders
2016-12-01
Designator Code, may get involved to ensure timely receipt. When a high-priority (Issue Priority Group 1) requisition is backordered, a CAS...alternative source for acquiring bit-piece parts is Navy excess material. Excess material is inventory designated by Navy organizations as meeting...potential alternative source for acquiring bit-piece parts is Navy excess material. Excess material is inventory designated by Navy organizations as
Multi-Material Recycling Manual. The Keep America Beautiful System. Revised Edition.
ERIC Educational Resources Information Center
1987
Solid waste management ranks third after schools and roads in most municipal budgets in the United States. Maximizing the separation of recyclable materials that can be reused may offer the highest priority and best use of our waste and should receive high priority in a solid waste management plan. This manual deals with the recycling of material…
Major Facilities for Materials Research and Related Disciplines.
ERIC Educational Resources Information Center
National Academy of Sciences - National Research Council, Washington, DC. Commission on Physical Sciences, Mathematics, and Resources.
This report presents priorities for new facilities and new capabilities at existing facilities with initial costs of at least $5 million. The new facilities in order of priority are: (1) a 6 GeV synchrotron radiation facility; (2) an advanced steady state neutron facility; (3) a 1 to 2 GeV synchrotron radiation facility; and (4) a high intensity…
NASA Astrophysics Data System (ADS)
Tartaglione, A.; Di Lorenzo, F.; Mayer, R. E.
2009-07-01
Cargo interrogation in search for special nuclear materials like highly-enriched uranium or 239Pu is a first priority issue of international borders security. In this work we present a thermal-pulsed neutron-based approach to a technique which combines the time-of-flight method and demonstrates a capability to detect small quantities of highly-enriched uranium shielded with high or low Z materials providing, in addition, a manner to know the approximate position of the searched material.
Detection for Nuclear Nonproliferation
Pozzi, Sara A.; Hamel, Michael C.; Polack, J. Kyle; ...
2016-11-13
The detection and characterization of special nuclear materials is a high priority area for applications in nuclear safeguards and nonproliferation. We are developing new instruments based on organic scintillators to detect and characterize the emissions from special nuclear materials. This paper describes some of the gaps and challenges in nuclear safeguards and proposed approaches.
Materials experiment carrier concepts definition study. Volume 2: Technical report, part 2
NASA Technical Reports Server (NTRS)
1981-01-01
A materials experiment carrier (MEC) that provides effective accommodation of the given baseline materials processing in space (MPS) payloads and demonstration of the MPS platform concept for high priority materials processing science, multidiscipline MPS investigations, host carrier for commercial MPS payloads, and system economy of orbital operations is defined. The study flow of task work is shown. Study tasks featured analysis and trades to identify the MEC system concept options.
Long-term bridge performance high priority bridge performance issues.
DOT National Transportation Integrated Search
2014-10-01
Bridge performance is a multifaceted issue involving performance of materials and protective systems, : performance of individual components of the bridge, and performance of the structural system as a whole. The : Long-Term Bridge Performance (LTBP)...
Work on the Margins: The Experience of Vocational Teachers in Comprehensive Schools.
ERIC Educational Resources Information Center
Little, Judith Warren; Threatt, Susan M.
As experienced by vocational teachers in five California comprehensive high schools, the peripheral nature of vocational education results from two dimensions of school context. First, the purposes and priorities of these comprehensive high schools tend to be ordered in ways that concentrate symbolic acclaim and material resources on academic…
Research priorities and history of advanced composite compression testing
NASA Technical Reports Server (NTRS)
Baumann, K. J.
1981-01-01
Priorities for standard compression testing research in advanced laminated fibrous composite materials are presented along with a state of the art survey (completed in 1979) including history and commentary on industrial test methods. Historically apparent research priorities and consequent (lack of) progress are supporting evidence for newly derived priorities.
Duan, Huabo; Yu, Danfeng; Zuo, Jian; Yang, Bo; Zhang, Yukui; Niu, Yongning
2016-12-01
The vast majority of construction material is inert and can be managed as nonhazardous. However, structures may have either been built with some environmentally unfriendly substances such as brominated flame retardants (BFRs), or have absorbed harmful elements such as heavy metals. This study focuses on end-of-life construction materials, i.e. construction and demolition (C&D) waste components. The aim was to characterize the concentration of extremely harmful substances, primarily BFRs, including hexabromocyclododecane (HBCD) and polybrominateddiphenyl ethers (PBDEs). Results revealed extremely high contents of HBCD and PBDEs in typical C&D waste components, particularly polyurethane foam materials. Policies should therefore be developed for the proper management of C&D waste, with priority for POP-containing debris. The first priority is to develop a classification system and procedures to separate out the harmful materials for more extensive processing. Additionally, identification and quantification of the environmental implications associated with dumping-dominated disposal of these wastes are required. Finally, more sustainable materials should be selected for use in the construction industry. Copyright © 2016 Elsevier B.V. All rights reserved.
26 CFR 1.1321-1 - Involuntary liquidation of lifo inventories.
Code of Federal Regulations, 2011 CFR
2011-04-01
... shall be increased to the extent of such difference. Any deficiency in the income or excess profits tax... shortages; (iii) to material shortages resulting from priorities or allocations; (iv) to labor shortages; or... shortages; (iii) material shortages resulting from priorities or allocations; (iv) labor shortages; and (v...
Priorities for the Slavic Languages.
ERIC Educational Resources Information Center
Gribble, Charles E.
The changing situation in the world and in academia requires a new perspective on priorities for Slavic language instructional materials. For example, courses must be developed that concentrate on reading skills, the main skill today's students of Slavic languages generally require. Materials needed for Slavic languages can be grouped into 16…
Materials experiment carrier concepts definition study. Volume 1: Executive summary, part 2
NASA Technical Reports Server (NTRS)
1981-01-01
The materials experiment carrier (MEC) is an optimized carrier for near term and advanced materials processing in space (MPS) research and commercial payloads. When coupled with the space platform (SP), the MEC can provide the extended duration, high power and low acceleration environment the MPS payload typically requires. The lowest cost, technically reasonable first step MEC that meets the MPS program missions objectives with minimum programmatic risks is defined. The effectiveness of the initial MEC/space platform idea for accommodating high priority, multidiscipline, R&D and commercial MPS payloads, and conducting MPS payload oprations at affordable funding and acceptable productivity levels is demonstrated.
GCR and SPE Radiation Effects in Materials
NASA Technical Reports Server (NTRS)
Waller, Jess; Rojdev, Kristina; Nichols, Charles
2016-01-01
This Year 3 project provides risk reduction data to assess galactic cosmic ray (GCR) and solar particle event (SPE) space radiation damage in materials used in manned low-earth orbit, lunar, interplanetary, and Martian surface missions. Long duration (up to 50 years) space radiation damage is being quantified for materials used in inflatable structures (1st priority), and space suit and habitable composite materials (2nd priority). The data collected has relevance for nonmetallic materials (polymers and composites) used in NASA missions where long duration reliability is needed in continuous or intermittent space radiation fluxes.
76 FR 396 - Product Change-Priority Mail-Non-Published Rates
Federal Register 2010, 2011, 2012, 2013, 2014
2011-01-04
... POSTAL SERVICE Product Change--Priority Mail--Non-Published Rates AGENCY: Postal Service TM . ACTION: Notice. SUMMARY: Postal Service notice of filing of a request with the Postal Regulatory... States Postal Service Concerning Priority Mail--Non-Published Rates and Notice of Filing Materials Under...
ERIC Educational Resources Information Center
Kennedy, Mike
2006-01-01
Educators and school designers place a high priority on creating facilities that enhance learning. That applies not only to how a school is built, but also to the materials and equipment used. Just as acoustical treatments or well-placed windows and skylights can make a classroom more conducive to learning, so can the right furniture. Desks,…
Space Radiation Effects in Inflatable and Composite Habitat Materials
NASA Technical Reports Server (NTRS)
Waller, Jess; Rojdev, Kristina
2015-01-01
This Year 2 project provides much needed risk reduction data to assess solar particle event (SPE) and galactic cosmic ray (GCR) space radiation damage in existing and emerging materials used in manned low-earth orbit, lunar, interplanetary, and Martian surface missions. More specifically, long duration (up to 50 years) space radiation damage is quantified for materials used in inflatable structures (1st priority), and habitable composite structures and space suits materials (2nd priority). The data collected has relevance for nonmetallic materials (polymers and composites) used in NASA missions where long duration reliability is needed in continuous or intermittent radiation fluxes.
Priority arbitration mechanism
Garmire, Derrick L [Kingston, NY; Herring, Jay R [Poughkeepsie, NY; Stunkel, Craig B [Bethel, CT
2007-03-06
A method is provided for selecting a data source for transmission on one of several logical (virtual) lanes embodied in a single physical connection. Lanes are assigned to either a high priority class or to a low priority class. One of six conditions is employed to determine when re-arbitration of lane priorities is desired. When this occurs a next source for transmission is selected based on a the specification of the maximum number of high priority packets that can be sent after a lower priority transmission has been interrupted. Alternatively, a next source for transmission is selected based on a the specification of the maximum number of high priority packets that can be sent while a lower priority packet is waiting. If initialized correctly, the arbiter keeps all of the packets of a high priority packet contiguous, while allowing lower priority packets to be interrupted by the higher priority packets, but not to the point of starvation of the lower priority packets.
Space Radiation Effects on Inflatable Habitat Materials Project
NASA Technical Reports Server (NTRS)
Waller, Jess M.; Nichols, Charles
2015-01-01
The Space Radiation Effects on Inflatable Habitat Materials project provides much needed risk reduction data to assess space radiation damage of existing and emerging materials used in manned low-earth orbit, lunar, interplanetary, and Martian surface missions. More specifically, long duration (up to 50 years) space radiation damage will be quantified for materials used in inflatable structures (1st priority), as well as for habitable composite structures and space suits materials (2nd priority). The data acquired will have relevance for nonmetallic materials (polymers and composites) used in NASA missions where long duration reliability is needed in continuous or intermittent radiation fluxes. This project also will help to determine the service lifetimes for habitable inflatable, composite, and space suit materials.
2002-12-09
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia sits on Launch Pad 39A, atop the Mobile Launcher Platform. The STS-107 research mission comprises experiments ranging from material sciences to life sciences, plus the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) that incorporates eight high priority secondary attached shuttle experiments. Mission STS-107 is scheduled to launch Jan. 16, 2003.
December 1990 EPA/Corps Enforcement Priorities Guidance
Document from 1990 providing guidance to EPA Regions and Army Corps of Engineers on enforcement priorities for unauthorized discharges of dredged or fill materials in violation of section 301 of the Clean Water Act (CWA).
Van Bossuyt, Melissa; Van Hoeck, Els; Raitano, Giuseppa; Manganelli, Serena; Braeken, Els; Ates, Gamze; Vanhaecke, Tamara; Van Miert, Sabine; Benfenati, Emilio; Mertens, Birgit; Rogiers, Vera
2017-04-01
Over the last years, more stringent safety requirements for an increasing number of chemicals across many regulatory fields (e.g. industrial chemicals, pharmaceuticals, food, cosmetics, …) have triggered the need for an efficient screening strategy to prioritize the substances of highest concern. In this context, alternative methods such as in silico (i.e. computational) techniques gain more and more importance. In the current study, a new prioritization strategy for identifying potentially mutagenic substances was developed based on the combination of multiple (quantitative) structure-activity relationship ((Q)SAR) tools. Non-evaluated substances used in printed paper and board food contact materials (FCM) were selected for a case study. By applying our strategy, 106 out of the 1723 substances were assigned 'high priority' as they were predicted mutagenic by 4 different (Q)SAR models. Information provided within the models allowed to identify 53 substances for which Ames mutagenicity prediction already has in vitro Ames test results. For further prioritization, additional support could be obtained by applying local i.e. specific models, as demonstrated here for aromatic azo compounds, typically found in printed paper and board FCM. The strategy developed here can easily be applied to other groups of chemicals facing the same need for priority ranking. Copyright © 2017 Elsevier Ltd. All rights reserved.
Prioritizing material recovery for end-of-life printed circuit boards
DOE Office of Scientific and Technical Information (OSTI.GOV)
Wang Xue, E-mail: xxw6590@rit.edu; Gaustad, Gabrielle, E-mail: gabrielle.gaustad@rit.edu
2012-10-15
Highlights: Black-Right-Pointing-Pointer Material recovery driven by composition, choice of ranking, and weighting. Black-Right-Pointing-Pointer Economic potential for new recycling technologies quantified for several metrics. Black-Right-Pointing-Pointer Indicators developed for materials incurring high eco-toxicity costs. Black-Right-Pointing-Pointer Methodology useful for a variety of stakeholders, particularly policy-makers. - Abstract: The increasing growth in generation of electronic waste (e-waste) motivates a variety of waste reduction research. Printed circuit boards (PCBs) are an important sub-set of the overall e-waste stream due to the high value of the materials contained within them and potential toxicity. This work explores several environmental and economic metrics for prioritizing the recovery ofmore » materials from end-of-life PCBs. A weighted sum model is used to investigate the trade-offs among economic value, energy saving potentials, and eco-toxicity. Results show that given equal weights for these three sustainability criteria gold has the highest recovery priority, followed by copper, palladium, aluminum, tin, lead, platinum, nickel, zinc, and silver. However, recovery priority will change significantly due to variation in the composition of PCBs, choice of ranking metrics, and weighting factors when scoring multiple metrics. These results can be used by waste management decision-makers to quantify the value and environmental savings potential for recycling technology development and infrastructure. They can also be extended by policy-makers to inform possible penalties for land-filling PCBs or exporting to the informal recycling sector. The importance of weighting factors when examining recovery trade-offs, particularly for policies regarding PCB collection and recycling are explored further.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)
Nelson, A. J.; Percher, C. M.; Zywiec, W. J.
This report presents the final design (CED-2) for IER-297, and focuses on 15 critical configurations using highly enriched uranium (HEU) Jemima plates moderated by polyethylene with and without hafnium diluent. The goal of the U.S. Nuclear Criticality Safety Program’s Thermal/Epithermal eXperiments (TEX) is to design and conduct new critical experiments to address high priority nuclear data needs from the nuclear criticality safety and nuclear data communities, with special emphasis on intermediate energy (0.625 eV – 100 keV) assemblies that can be easily modified to include various high priority diluent materials. The TEX (IER 184) CED-1 Report [1], completed in 2012,more » demonstrated the feasibility of meeting the TEX goals with two existing NCSP fissile assets, plutonium Zero Power Physics Reactor (ZPPR) plates and highly enriched uranium (HEU) Jemima plates. The first set of TEX experiments will focus on using the plutonium ZPPR plates with polyethylene moderator and tantalum diluents.« less
NASA Astrophysics Data System (ADS)
Sandoval, Perla K.
A formative evaluation of behavior change elements of an ongoing Weatherization Assistance Program (WAP) offered by the Energy Resource Center (E.R.C.) in Denver, CO was conducted. The WAP as administered by the E.R.C. in Colorado saves residents an average 15% of energy consumption (E.R.C., 2015). However, research suggests that adding behavioral components to WAPs could increase energy savings to 21-26% (Gregory, 1992; APPRAISE, 2002). The goal of this evaluation is to provide recommendations to E.R.C. for program changes using Community Based Social Marketing (CBSM) and Theory of Planned Behavior. The CBSM Step 1- Step 3 is the focus of this formative evaluation. This program evaluation has four components: 1) review of written materials, 2) interviews with staff, 3) surveys mailed to E.R.C. clients and 4) in-home observations conducted with E.R.C. clients. Results of this formative evaluation has 3 sections of behaviors recommended for future intervention high priority, mid priority, and low priority recommendations based on CBSM penetration, probability, and impact factors. Behaviors that are listed as high priority for E.R.C. Behavioral intervention are cold water washing, hang drying, setting back thermostats, and window coverings. Overall increase in staff engagement is also recommended to be pursued. Each staff level is also given recommendations on how to engage in behavior change interventions.
High-efficiency machining methods for aviation materials
NASA Astrophysics Data System (ADS)
Kononov, V. K.
1991-07-01
The papers contained in this volume present results of theoretical and experimental studies aimed at increasing the efficiency of cutting tools during the machining of high-temperature materials and titanium alloys. Specific topics discussed include a study of the performance of disk cutters during the machining of flexible parts of a high-temperature alloy, VZhL14N; a study of the wear resistance of cutters of hard alloys of various types; effect of a deformed electric field on the precision of the electrochemical machining of gas turbine engine components; and efficient machining of parts of composite materials. The discussion also covers the effect of the technological process structure on the residual stress distribution in the blades of gas turbine engines; modeling of the multiparameter assembly of engineering products for a specified priority of geometrical output parameters; and a study of the quality of the surface and surface layer of specimens machined by a high-temperature pulsed plasma.
NASA Technical Reports Server (NTRS)
Woo, Simon S.; Cheng, Michael K.
2011-01-01
The original Luby Transform (LT) coding scheme is extended to account for data transmissions where some information symbols in a message block are more important than others. Prioritized LT codes provide unequal error protection (UEP) of data on an erasure channel by modifying the original LT encoder. The prioritized algorithm improves high-priority data protection without penalizing low-priority data recovery. Moreover, low-latency decoding is also obtained for high-priority data due to fast encoding. Prioritized LT codes only require a slight change in the original encoding algorithm, and no changes at all at the decoder. Hence, with a small complexity increase in the LT encoder, an improved UEP and low-decoding latency performance for high-priority data can be achieved. LT encoding partitions a data stream into fixed-sized message blocks each with a constant number of information symbols. To generate a code symbol from the information symbols in a message, the Robust-Soliton probability distribution is first applied in order to determine the number of information symbols to be used to compute the code symbol. Then, the specific information symbols are chosen uniform randomly from the message block. Finally, the selected information symbols are XORed to form the code symbol. The Prioritized LT code construction includes an additional restriction that code symbols formed by a relatively small number of XORed information symbols select some of these information symbols from the pool of high-priority data. Once high-priority data are fully covered, encoding continues with the conventional LT approach where code symbols are generated by selecting information symbols from the entire message block including all different priorities. Therefore, if code symbols derived from high-priority data experience an unusual high number of erasures, Prioritized LT codes can still reliably recover both high- and low-priority data. This hybrid approach decides not only "how to encode" but also "what to encode" to achieve UEP. Another advantage of the priority encoding process is that the majority of high-priority data can be decoded sooner since only a small number of code symbols are required to reconstruct high-priority data. This approach increases the likelihood that high-priority data is decoded first over low-priority data. The Prioritized LT code scheme achieves an improvement in high-priority data decoding performance as well as overall information recovery without penalizing the decoding of low-priority data, assuming high-priority data is no more than half of a message block. The cost is in the additional complexity required in the encoder. If extra computation resource is available at the transmitter, image, voice, and video transmission quality in terrestrial and space communications can benefit from accurate use of redundancy in protecting data with varying priorities.
Research priorities in the field of HIV and AIDS in Iran
Haghdoost, AliAkbar; Sadeghi, Masoomeh; Nasirian, Maryam; Mirzazadeh, Ali; Navadeh, Soodabeh
2012-01-01
Background: HIV is a multidimensional problem. Therefore, prioritization of research topics in this field is a serious challenge. We decided to prioritize the major areas of research on HIV/AIDS in Iran. Materials ans Methods: In a brain-storming session with the main national and provincial stakeholders and experts from different relevant fields, the direct and indirect dimensions of HIV/AIDS and its related research issues were explored. Afterward, using the Delphi method, we sent questionnaires to 20 experts (13 respondents) from different sectors. In this electronic based questioner, we requested experts to evaluate main topics and their subtopics. The ranges of scores were between 0 and 100. Results: The score of priorities of main themes were preventive activities (43.2), large scale planning (25.4), the estimation of the HIV/AIDS burden (20.9), and basic scientific research (10.5). The most important priority in each main theme was education particularly in high risk groups (52.5), developing the national strategy to address the epidemic (31.8), estimation of the incidence and prevalence among high-risk groups (59.5) and developing new preventive methods (66.7), respectively. Conclusions: The most important priorities of researches on HIV/AIDS were preventive activities and developing national strategy. As high risk groups are the most involved people in the epidemic, and they are also the most hard-to-reach sub-populations, a national well designated comprehensive strategy is essential. However, we believe with a very specific and directed scheme, special attention to research in basic sciences is necessary, at least in limited number of institutes. PMID:23626616
NASA Technical Reports Server (NTRS)
1976-01-01
The approach of matching technology areas with various themes needs was not effective for the materials and thermal control discipline because of the diversity of requirements for each. Top priorities were evolved from the advanced space transportation system and the space power platform because these are essential building blocks in fulfilling some of the other themes. Important needs identified include life long-life cryogenic cooling systems for sensors, masers, and other devices and the needs for lightweight nuclear shielding materials for nuclear electric propulsion.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Maingi, Rajesh; Zinkle, Steven J.; Foster, Mark S.
2015-05-01
The realization of controlled thermonuclear fusion as an energy source would transform society, providing a nearly limitless energy source with renewable fuel. Under the auspices of the U.S. Department of Energy, the Fusion Energy Sciences (FES) program management recently launched a series of technical workshops to “seek community engagement and input for future program planning activities” in the targeted areas of (1) Integrated Simulation for Magnetic Fusion Energy Sciences, (2) Control of Transients, (3) Plasma Science Frontiers, and (4) Plasma-Materials Interactions aka Plasma-Materials Interface (PMI). Over the past decade, a number of strategic planning activities1-6 have highlighted PMI and plasmamore » facing components as a major knowledge gap, which should be a priority for fusion research towards ITER and future demonstration fusion energy systems. There is a strong international consensus that new PMI solutions are required in order for fusion to advance beyond ITER. The goal of the 2015 PMI community workshop was to review recent innovations and improvements in understanding the challenging PMI issues, identify high-priority scientific challenges in PMI, and to discuss potential options to address those challenges. The community response to the PMI research assessment was enthusiastic, with over 80 participants involved in the open workshop held at Princeton Plasma Physics Laboratory on May 4-7, 2015. The workshop provided a useful forum for the scientific community to review progress in scientific understanding achieved during the past decade, and to openly discuss high-priority unresolved research questions. One of the key outcomes of the workshop was a focused set of community-initiated Priority Research Directions (PRDs) for PMI. Five PRDs were identified, labeled A-E, which represent community consensus on the most urgent near-term PMI scientific issues. For each PRD, an assessment was made of the scientific challenges, as well as a set of actions to address those challenges. No prioritization was attempted amongst these five PRDs. We note that ITER, an international collaborative project to substantially extend fusion science and technology, is implicitly a driver and beneficiary of the research described in these PRDs; specific ITER issues are discussed in the background and PRD chapters. For succinctness, we describe these PRDs directly below; a brief introduction to magnetic fusion and the workshop process/timeline is given in Chapter I, and panelists are listed in the Appendix.« less
NASA R and T aerospace plane vehicles: Progress and plans
NASA Technical Reports Server (NTRS)
Dixon, S. C.
1985-01-01
Progress made in key technologies such as materials, structures, aerothermodynamics, hypersonic aerodynamics, and hypersonic airbreathing propulsion are reported. Advances were made in more generic, areas such as active controls, flight computer hardware and software, and interdisciplinary analytical design methodology. These technology advances coupled with the development of and experiences with the Space Shuttle make feasible aerospace plane-type vehicles that meet the more demanding requirements of various DOD missions and/or an all-weather Shuttle II with reduced launch costs. Technology needs and high payoff technologies, and the technology advancements in propulsion, control-configured-vehicles, aerodynamics, aerothermodynamics, aerothermal loads, and materials and structures were studied. The highest payoff technologies of materials and structures including thermal-structural analysis and high temperature test techniques are emphasized. The high priority technology of propulsion, and plans, of what remains to be done rather than firm program commitments, are briefly discussed.
Landing Site Selection for Mars Sample Return
NASA Astrophysics Data System (ADS)
Farmer, J. D.
2002-05-01
"Follow the water" remains a guiding theme in the Mars exploration program. This is because information about the early volatile and climate history of Mars, habitability for past or present life and the potential for human exploration all require a knowledge of the distribution of water in all its forms and how water reservoirs have changed over time.ÿ Over the next four launch opportunities (through 2009), implementation of this broad goal will achieved using a combination of infrared spectral mapping of mineralogy from orbit and on the ground (to identify ancient surface water systems), and radar sounding from orbit to locate reservoirs of modern subsurface water. High spatial and spectral resolution mineralogical mapping from orbit is considered essential for locating the highest priority sites for in situ surface exploration and sample return. This work is now underway with THEMIS, a mid-IR instrument onboard the Odyssey spacecraft and presently mapping Mars at a spatial resolution of ~100 m/pixel. In 2005 the Mars Reconnaissance Orbiter (MRO) will carry a hyperspectral, near IR instrument capable of mapping targeted areas at a spatial resolution of <50 m/pixel. The 2001 and 2005 orbital missions will be interleaved with surface investigations in 2003 which will place twin "Mars Exploration Rovers" (MER's A and B) at two high priority sites to gather in situ information about surface mineralogy and petrology. The synergistic use of orbital reconnaissance and landed in situ science during the next three launch opportunities will yield important new information about the hydrological history of Mars that will provide a basis for targeting a second rover mission, the Mars Smart Lander (MSL), to a high priority site in 2009. The MSL rover will be a large, mobile platform of prolonged mission capability, that will conduct a variety of surface and shallow subsurface experiments to explore for aqueous minerals and organic materials preserved in aqueous sedimentary materials. In combination, these broadly-based investigations comprise an essential prelude for the targeting of sites for a first sample return from Mars sometime after 2011. In this talk, I will also review some of the high priority sites that have been identified as potential targets for the 2003 MER landers and beyond based on what we have learned about Mars since Viking.
Graphene/Mo2C heterostructure directly grown by chemical vapor deposition
NASA Astrophysics Data System (ADS)
Deng, Rongxuan; Zhang, Haoran; Zhang, Yanhui; Chen, Zhiying; Sui, Yanping; Ge, Xiaoming; Liang, Yijian; Hu, Shike; Yu, Guanghui; Jiang, Da
2017-06-01
Not Available Project supported by the National Natural Science Foundation of China (Grant Nos. 1402342, 11574338, and 11274333), the Hundred Talents Program of Chinese Academy of Sciences, the International Collaboration and Innovation Program on High Mobility Materials Engineering, Chinese Academy of Sciences (Grant No. KGZD-EW-303), and the "Strategic Priority Research Program (B)" of the Chinese Academy of Sciences (Grant No. XDB04040300).
Roadmap for Agriculture Biomass Feedstock Supply in the United States
2003-11-01
the high-priority areas for biomass supply forecasts and analysis . Top research needs in sustainability and plant sciences areas are listed in the...petroleum. Lignocellulosic biomass is the nonstarch, fibrous part of plant material that is inherently moist and lightweight. The sugar platform...include: •“Biotechnology, genetics and plant physiology for improved feedstocks, • Optimize agronomic practices, including land use availability and soil
2002-12-09
KENNEDY SPACE CENTER, FLA. - Space Shuttle Columbia is poised to begin rollout from the Vehicle Assembly Building to Launch Pad 39A. The STS-107 research mission comprises experiments ranging from material sciences to life sciences (many rats), plus the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) that incorporates eight high priority secondary attached shuttle experiments. Mission STS-107 is scheduled to launch Jan. 16, 2003.
DOE Office of Scientific and Technical Information (OSTI.GOV)
M. Ono; Jaworski, M.; Kaita, R.
Developing a reactor compatible divertor and managing the associated plasma material interaction (PMI) has been identified as a high priority research area for magnetic confinement fusion. Accordingly on NSTX-U, the PMI research has received a strong emphasis. Moreover, with ˜15 MW of auxiliary heating power, NSTX-U will be able to test the PMI physics with the peak divertor plasma facing component (PFC) heat loads of up to 40-60 MW/m 2.
Implementation of environmentally compliant cleaning and insulation bonding for MNASA
NASA Technical Reports Server (NTRS)
Hutchens, Dale E.; Keen, Jill M.; Smith, Gary M.; Dillard, Terry W.; Deweese, C. Darrell; Lawson, Seth W.
1995-01-01
Historically, many subscale and full-scale rocket motors have employed environmentally and physiologically harmful chemicals during the manufacturing process. This program examines the synergy and interdependency between environmentally acceptable materials for solid rocket motor insulation applications, bonding, corrosion inhibiting, painting, priming, and cleaning, and then implements new materials and processes in subscale motors. Tests have been conducted to eliminate or minimize hazardous chemicals used in the manufacture of modified-NASA materials test motor (MNASA) components and identify alternate materials and/or processes following NASA Operational Environmental Team (NOET) priorities. This presentation describes implementation of high pressure water refurbishment cleaning, aqueous precision cleaning using both Brulin 815 GD and Jettacin, and insulation case bonding using ozone depleting chemical (ODC) compliant primers and adhesives.
PantherPix hybrid pixel γ-ray detector for radio-therapeutic applications
NASA Astrophysics Data System (ADS)
Neue, G.; Benka, T.; Havránek, M.; Hejtmánek, M.; Janoška, Z.; Kafka, V.; Korchak, O.; Lednický, D.; Marčišovská, M.; Marčišovský, M.; Popule, J.; Şmarhák, J.; Şvihra, P.; Tomášek, L.; Vrba, V.; Konček, O.; Semmler, M.
2018-02-01
This work focuses on the design of a semiconductor pixelated γ-ray camera with a pixel size of 1 mm2. The cost of semiconductor manufacturing is mainly driven by economies of scale, which makes silicon the cheapest semiconductor material due to its widespread utilization. The energy of γ-photons used in radiation therapy are in a range, in which the dominant interaction mechanism is Compton scattering in every conceivable sensor material. Since the Compton scattering cross section is linearly dependent upon Z, it is less rewarding to utilize high Z sensor materials, than it is in the case of X-ray detectors (X-rays interact also via the photoelectric effect whose cross section scales proportional to Zn, where n is ≈ 4,5). For the stated reasons it was decided to use the low Z material silicon (Z = 14) despite its worse detection efficiency. The proposed detector is designed as a portal detector to be used in radiation cancer therapy. The purpose of the detector is to ensure correct patient alignment, spatial dose monitoring and to provide the feedback necessary for an emergency shutdown should the spatial dose rate profile deviate from the treatment plan. Radiation therapy equipment is complex and thus failure prone and the consequences of malfunction are often life threatening. High spatial resolution and high detection efficiency are not a high design priority. The detector design priorities are focused up on radiation hardness, robustness and the ability to cover a large area cost efficiently. The quintessential idea of the PanterPix detector exploits the relaxed spatial resolution requirement to achieve the stated goals. The detector is composed of submodules, each submodule consisting of a Si sensor with an array of fully depleted detection diodes and 8 miniature custom design readout ASICs collecting and measuring the minuscule charge packets generated due to ionization in the PN junctions.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-08-05
... material, isolation and capping of non- hazardous materials, installation of fencing, posting of warning... on the site, No excavations causing erosion, No excavation below base material of the road bed (State...
Staff Experiences Forming and Sustaining Palliative Care Teams in Nursing Homes.
Norton, Sally A; Ladwig, Susan; Caprio, Thomas V; Quill, Timothy E; Temkin-Greener, Helena
2018-01-03
Building palliative care (PC) capacity in nursing homes (NH) is a national priority and essential to providing high quality care for residents with advanced illness. We report on NH staff experiences in developing and sustaining Palliative Care Teams (PCTeams) as part of a randomized clinical trial to "Improve Palliative Care through Teamwork" (IMPACTT). We conducted rapid ethnographic assessments of all NH (N = 14) in the intervention arm. Data included semistructured interviews with direct care and administrative staff (n = 41), field observations, and written materials. We used a phased approach to data analysis including open coding and comparative analyses within and across homes. We found four key structural themes in our analysis including: administrative support, financial considerations, turnover and staffing, and competing priorities. The development and sustainability of the nascent PCTeams were constantly threatened by competing priorities and the key factor in their success was consistent and tangible administrative support. While improving PC in NHs is a recognized priority, lack of stable infrastructure and unintended consequences of reimbursement policies created conditions which often thwarted the sustainability of the PCTeams. © The Author(s) 2018. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
2002-12-09
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, atop the Mobile Launcher Platform, approaches the top of Launch Pad 39A where it will undergo preparations for launch. The STS-107 research mission comprises experiments ranging from material sciences to life sciences, plus the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) that incorporates eight high priority secondary attached shuttle experiments. Mission STS-107 is scheduled to launch Jan. 16, 2003.
LDEF materials data analysis: Representative examples
NASA Technical Reports Server (NTRS)
Pippin, Gary; Crutcher, Russ
1993-01-01
Part of the philosophy which guided the examination of hardware from the Long Duration Exposure Facility (LDEF) was that materials present at multiple locations should have fairly high priority for investigation. Properties of such materials were characterized as a function of exposure conditions to obtain as much data as possible for predicting performance lifetimes. Results from examination of several materials from interior locations of LDEF, selected measurements on silverized teflon blanket specimens, and detailed measurements on the copper grounding strap from tray D11 are summarized. Visual observations of interior locations of LDEF made during deintegration at KSC showed apparent changes in particular specimens. This inspection lead to testing of selected nylon clamps, fiberglass shims, and heat shrink tubing from wire harness clamps, and visually discolored silver coated hex nuts.
Research priorities for advanced fibrous composites
NASA Technical Reports Server (NTRS)
Baumann, K. J.; Swedlow, J. L.
1981-01-01
Priorities for research in advanced laminated fibrous composite materials are presented. Supporting evidence is presented in two bodies, including a general literature survey and a survey of aerospace composite hardware and service experience. Both surveys were undertaken during 1977-1979. Specific results and conclusions indicate that a significant portion of contemporary published research diverges from recommended priorites.
Threaded Introductory Chemistry for Prepharmacy: A Model for Preprofessional Curriculum Redesign
ERIC Educational Resources Information Center
Barth, Benjamin S.; Bucholtz, Ehren C.
2017-01-01
Introductory chemistry courses are required as part of the undergraduate preparation necessary for entry into an array of professional programs. Given the varied priorities of the student population in these courses, it can be difficult to present the material such that students see their individual future academic priorities represented in each…
76 FR 17629 - Applications for New Awards; Transition to Teaching Grant Program
Federal Register 2010, 2011, 2012, 2013, 2014
2011-03-30
... teachers in high-need schools operated by high-need local educational agencies (LEAs), including charter schools that operate as high-need LEAs. Priorities: This notice contains two competitive preference... Preference Priorities: Competitive Preference Priority 1 is from section 2313(c) of the Elementary and...
NASA Technical Reports Server (NTRS)
Hambourger, Paul D.
1997-01-01
Useful and informative results were obtained on virtually all materials investigated. For example, the stability of ITO-based arc-proof transparent coatings was greatly improved by substitution of silicon oxide for magnesium fluoride as a dopant. Research on 'air-doped' ITO films has yielded new insight into their conduction mechanism which will help in further development of these coatings. Some air-doped films were found to be extremely pressure sensitive. This work may lead to improved, low-cost gas sensors and vacuum gauges. Work on another promising transparent arc-proof coating (titanium oxide) was initiated in collaboration with industry. Graphite oxide-like materials were synthesized and tested for possible use in high energy-density batteries and other applications. We also started a high-priority project to find the cause of unexpected environmental damage to the exterior of the Hubble Space Telescope (HST) discovered on a recent Shuttle mission. Materials were characterized before and after exposure to soft x-rays and other threats in ground-based simulators.
2002-12-09
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia rolls towards Launch Pad 39A, sitting atop the Mobile Launcher Platform, which in turn is carried by the crawler-transporter underneath. The STS-107 research mission comprises experiments ranging from material sciences to life sciences (many rats), plus the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) that incorporates eight high priority secondary attached shuttle experiments. Mission STS-107 is scheduled to launch Jan. 16, 2003.
The EEOC charge priority policy and claimants with psychiatric disabilities.
Ullman, M D; Johnsen, M C; Moss, K; Burris, S
2001-05-01
In June 1995 the U.S. Equal Employment Opportunity Commission (EEOC) instituted a new charge priority policy. Under the new policy, charges are classified as one of three priority levels during or immediately after intake. Only charges assigned a high priority receive a full investigation. This paper examines the effect of the charge priority policy on individuals with psychiatric disabilities who filed Americans With Disabilities Act (ADA) charges with the EEOC. Using data extracted from the EEOC's charge data system, the authors analyzed all 66,298 ADA claims prioritized and closed between June 1995 and March 1998. The z test for difference in proportions and the generalized estimating equations procedure were used. The primary outcome measure was the priority assignment received by ADA claimants. Charges that received a high priority assignment were more likely to result in benefits for claimants. Charges filed by claimants with psychiatric disabilities were significantly less likely to be assigned a high priority than charges filed by other claimants. Claimants with psychiatric disabilities were also significantly less likely to benefit from their claims. The strong relationship between being assigned high priority and receiving benefits as a result of filing a charge demonstrates the importance of accurate priority categorization. The finding that people with psychiatric disabilities are less likely than others to benefit from their claims is cause for concern, particularly given the fact that the accuracy of the charge prioritization system has not been validated.
Continuing Education in New Materials. FEU PICKUP.
ERIC Educational Resources Information Center
Gunning, Angela; Clift, Roland
A British project: (1) identified national needs for continuing education and training (CET) in new materials; (2) assessed the priorities among the needs and developed course outlines; and (3) established a CET needs review system for training in new materials. The new materials fall into four categories: (1) polymers; (2) composites; (3)…
Materials Experience as a Foundation for Materials and Design Education
ERIC Educational Resources Information Center
Pedgley, Owain; Rognoli, Valentina; Karana, Elvin
2016-01-01
An important body of research has developed in recent years, explaining ways in which product materials influence user experiences. A priority now is to ensure that the research findings are adopted within an educational context to deliver contemporary curricula for students studying the subject of materials and design. This paper reports on an…
Thermal Preload Relaxation of Bolted CFRP Structures for Flexible Life Time Design Methodology
NASA Astrophysics Data System (ADS)
Hubbertz, Hendrik; Friedrich, Christoph
2014-06-01
Taking into account the assembly, maintenance and repair of component systems, it becomes clear that mechanical fastening is necessary also for CFRP structures besides adhesive bonding. Threaded fasteners usually prestress CFRP materials perpendicular to the fibres. In this direction the high strength-increase by the carbon fibres is subordinated and the material properties are dominated by the relatively low strength plastic matrix. The following chapters explain the basics of preload loss at threaded fasteners and show the results of experiments with different influences on preload relaxation with CFRP materials. As the presented studies were carried out under the influence of temperature, thermal load plastification will be regarded as priority. The structural changes in the material are also documented with microscope images as well as an outlook for further research is given.
Cornu, Pieter; Phansalkar, Shobha; Seger, Diane L; Cho, Insook; Pontefract, Sarah; Robertson, Alexandra; Bates, David W; Slight, Sarah P
2018-03-01
To investigate whether alert warnings for high-priority and low-priority drug-drug interactions (DDIs) were present in five international electronic health record (EHR) systems, to compare and contrast the severity level assigned to them, and to establish the proportion of alerts that were overridden. We conducted a comparative, retrospective, multinational study using a convenience sample of 5 EHRs from the U.S., U.K., Republic of Korea and Belgium. Of the 15 previously defined, high-priority, class-based DDIs, alert warnings were found to exist for 11 in both the Korean and UK systems, 9 in the Belgian system, and all 15 in the two US systems. The specific combinations that were included in these class-based DDIs varied considerably in number, type and level of severity amongst systems. Alerts were only active for 8.4% (52/619) and 52.4% (111/212) of the specific drug-drug combinations contained in the Belgian and UK systems, respectively. Hard stops (not possible to override) existed in the US and UK systems only. The override rates for high-priority alerts requiring provider action ranged from 56.7% to 83.3%. Of the 33 previously defined low-priority DDIs, active alerts existed only in the US systems, for three class-based DDIs. The majority were non-interruptive. Alert warnings existed for most of the high-priority DDIs in the different EHRs but overriding them was easy in most of the systems. In addition to validating the high- and low-priority DDIs, this study reported a lack of standardization in DDI levels across different international knowledge bases. Copyright © 2017. Published by Elsevier B.V.
Zhang, Bo; Cohen, Joanna E; OʼConnor, Shawn
2014-01-01
Selection of priority groups is important for health interventions. However, no quantitative method has been developed. To develop a quantitative method to support the process of selecting priority groups for public health interventions based on both high risk and population health burden. Secondary data analysis of the 2010 Canadian Community Health Survey. Canadian population. Survey respondents. We identified priority groups for 3 diseases: heart disease, stroke, and chronic lower respiratory diseases. Three measures--prevalence, population counts, and adjusted odds ratios (OR)--were calculated for subpopulations (sociodemographic characteristics and other risk factors). A Priority Group Index (PGI) was calculated by summing the rank scores of these 3 measures. Of the 30 priority groups identified by the PGI (10 for each of the 3 disease outcomes), 7 were identified on the basis of high prevalence only, 5 based on population count only, 3 based on high OR only, and the remainder based on combinations of these. The identified priority groups were all in line with the literature as risk factors for the 3 diseases, such as elderly people for heart disease and stroke and those with low income for chronic lower respiratory diseases. The PGI was thus able to balance both high risk and population burden approaches in selecting priority groups, and thus it would address health inequities as well as disease burden in the overall population. The PGI is a quantitative method to select priority groups for public health interventions; it has the potential to enhance the effective use of limited public resources.
Health Resources Priority and Allocations System (HRPAS). Interim final rule.
2015-07-17
This interim final rule establishes standards and procedures by which the U.S. Department of Health and Human Services (HHS) may require that certain contracts or orders that promote the national defense be given priority over other contracts or orders. This rule also sets new standards and procedures by which HHS may allocate materials, services, and facilities to promote the national defense. This rule will implement HHS's administration of priorities and allocations actions, and establish the Health Resources Priorities and Allocation System (HRPAS). The HRPAS will cover health resources pursuant to the authority under Section 101(c) of the Defense Production Act as delegated to HHS by Executive Order 13603. Priorities authorities (and other authorities delegated to the Secretary in E.O. 13603, but not covered by this regulation) may be re-delegated by the Secretary. The Secretary retains the authority for allocations.
Clavisi, Ornella; Bragge, Peter; Tavender, Emma; Turner, Tari; Gruen, Russell L
2013-05-01
We present a multistep process for identifying priority research areas in rehabilitation and long-term care of traumatic brain-injured (TBI) patients. In particular, we aimed to (1) identify which stakeholders should be involved; (2) identify what methods are appropriate; (3) examine different criteria for the generation of research priority areas; and (4) test the feasibility of linkage and exchange among researchers, decision makers, and other potential users of the research. Potential research questions were identified and developed using an initial scoping meeting and preliminary literature search, followed by a facilitated mapping workshop and an online survey. Identified research questions were then prioritized against specific criteria (clinical importance, novelty, and controversy). Existing evidence was then mapped to the high-priority questions using usual processes for search, screening, and selection. A broad range of stakeholders were then brought together at a forum to identify priority research themes for future research investment. Using clinical and research leaders, smaller targeted planning workshops prioritized specific research projects for each of the identified themes. Twenty-six specific questions about TBI rehabilitation were generated, 14 of which were high priority. No one method identified all high-priority questions. Methods that relied solely on the views of clinicians and researchers identified fewer high-priority questions compared with methods that used broader stakeholder engagement. Evidence maps of these high-priority questions yielded a number of evidence gaps. Priority questions and evidence maps were then used to inform a research forum, which identified 12 priority themes for future research. Our research demonstrates the value of a multistep and multimethod process involving many different types of stakeholders for prioritizing research to improve the rehabilitation outcomes of people who have suffered TBI. Enhancing stakeholder representation can be augmented using a combination of methods and a process of linkage and exchange. This process can inform decisions about prioritization of research areas. Copyright © 2013 Elsevier Inc. All rights reserved.
7 CFR 4279.155 - Loan priorities.
Code of Federal Regulations, 2010 CFR
2010-01-01
... natural disaster or experiencing fundamental structural changes in its economic base (5 points). (iv... the maximum allowable for a loan of its size (5 points). (5) High impact business investment priorities. The priority score for high impact business investment will be the total score for the following...
ERIC Educational Resources Information Center
Sai, Fred T.
This essay discusses family health needs in the developing world, their priorities, and the standards of health required, with particular reference to family planning. The author takes into account medical, social, and economic factors that influence those concerns. Some of the material presented in this essay first appeared in other international…
ERIC Educational Resources Information Center
Foster, Gayla; Alexander, JoAnne C.; Bass, Elaine; Black, Paulette; Cesario, Robert; Clow, Jo Ellen; Dalton, Doug; Dedmon, Charla; Gabbard, Susan; Gabel, Barbara; Goree, Gary; Kyle, Nicholas; Martin, Rita; Merklin, Roxy; Riley, Patrick; Reed, John
This kit is designed to help teachers throughout the state of Oklahoma implement the arts in the core curriculum. Suggestions are included for classroom activities that complement the arts competencies in the "Priority Academic Student Skills (PASS)." The kit is a collection of ideas to introduce or reinforce PASS. In the material is a…
Master Environmental Plan for Fort Devens, Massachusetts
1992-04-01
sites located in proximity to each other were grouped together. The rationale for the order of priority assigned to the study areas in this section is...following priority categories: 1. High priority for action. All group 1 study areas have known contamination. Group IA includes sites that have ongoing...remedial investigations. Group 1B includes sites that have ongoing site inspections. 2. Moderate to high priority for action. Study areas in groups 3
Job Grading Standard for Materials Expediter WG-6705.
ERIC Educational Resources Information Center
Civil Service Commission, Washington, DC. Bureau of Policies and Standards.
The standard is used to grade nonsupervisory jobs involved in routing and expediting the movement of parts, end items, supplies, and materials within production and repair facilities to meet priority needs. The work requires knowledge of material characteristics, uses, condition, industrial production shop procedures, shop layout, and internal…
ERIC Educational Resources Information Center
McCully, James S., Jr.
1978-01-01
Arguments are presented for curriculum materials development to be treated as a separate entity from departments of agricultural teacher education. Reasons given for a separate curriculum laboratory include priority given to materials development, economy and efficiency of production, and improved cooperation between teacher educators, state…
76 FR 69246 - Application for New Awards; High School Equivalency Program
Federal Register 2010, 2011, 2012, 2013, 2014
2011-11-08
... could include, for example, participation in training on intensive science teaching techniques presented...)). The third priority is an invitational priority for applications that promote science, technology... preference over other applications. These priorities are: Invitational Priority 1--Science, Technology...
Priorities for future innovation, research, and advocacy in dental restorative materials.
Watson, T; Fox, C H; Rekow, E D
2013-11-01
Innovations in materials science, both within and outside of dentistry, open opportunities for the development of exciting direct restorative materials. From rich dialog among experts from dental and non-dental academic institutions and industry, as well as those from policy, research funding, and professional organizations, we learned that capitalizing on these opportunities is multifactorial and far from straightforward. Beginning from the point when a restoration is needed, what materials, delivery systems, and skills are needed to best serve the most people throughout the world's widely varied economic and infrastructure systems? New research is a critical element in progress. Effective advocacy can influence funding and drives change in practice and policy. Here we articulate both research and advocacy priorities, with the intention of focusing the energy and expertise of our best scientists on making a difference, bringing new innovations to improve oral health.
10 CFR 217.52 - Controlling the general distribution of a material in the civilian market.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 10 Energy 3 2014-01-01 2014-01-01 false Controlling the general distribution of a material in the civilian market. 217.52 Section 217.52 Energy DEPARTMENT OF ENERGY OIL ENERGY PRIORITIES AND ALLOCATIONS... a written finding that: (1) Such material is a scarce and critical material essential to the...
10 CFR 217.52 - Controlling the general distribution of a material in the civilian market.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 3 2013-01-01 2013-01-01 false Controlling the general distribution of a material in the civilian market. 217.52 Section 217.52 Energy DEPARTMENT OF ENERGY OIL ENERGY PRIORITIES AND ALLOCATIONS... a written finding that: (1) Such material is a scarce and critical material essential to the...
10 CFR 217.52 - Controlling the general distribution of a material in the civilian market.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 10 Energy 3 2012-01-01 2012-01-01 false Controlling the general distribution of a material in the civilian market. 217.52 Section 217.52 Energy DEPARTMENT OF ENERGY OIL ENERGY PRIORITIES AND ALLOCATIONS... a written finding that: (1) Such material is a scarce and critical material essential to the...
NASA Astrophysics Data System (ADS)
Thompson, N. A.; Ruck, H. W.
1984-04-01
The Air Force is interested in identifying potentially hazardous tasks and prevention of accidents. This effort proposes four methods for determining safety training priorities for job tasks in three enlisted specialties. These methods can be used to design training aimed at avoiding loss of people, time, materials, and money associated with on-the-job accidents. Job tasks performed by airmen were measured using task and job factor ratings. Combining accident reports and job inventories, subject-matter experts identified tasks associated with accidents over a 3-year period. Applying correlational, multiple regression, and cost-benefit analysis, four methods were developed for ordering hazardous tasks to determine safety training priorities.
NASA Astrophysics Data System (ADS)
Keen, Jill M.; Hutchens, D. E.; Smith, G. M.; Dillard, T. W.
1994-06-01
MNASA, a quarter-scale space shuttle solid rocket motor, has historically been processed using environmentally and physiologically harmful chemicals. This program draws from previous testing done in support of full-scale manufacturing and examines the synergy and interdependency between environmentally acceptable materials for Solid Rocket Motor insulation applications, bonding, corrosion inhibiting, painting, priming and cleaning; and then implements new materials and processes in sub-scale motors. Tests have been conducted to eliminate or minimize hazardous chemicals used in the manufacture of MNASA components and identify alternate materials and/or processes following NASA Operational Environment Team (NOET) priorities. This presentation describes implementation of high pressure water refurbishment cleaning, aqueous precision cleaning using both Brulin 815 GD and Jettacin and insulation case bonding using ODC compliant primers and adhesives.
Global priorities for conservation across multiple dimensions of mammalian diversity
Graham, Catherine H.; Costa, Gabriel C.; Hedges, S. Blair; Penone, Caterina; Radeloff, Volker C.; Rondinini, Carlo; Davidson, Ana D.
2017-01-01
Conservation priorities that are based on species distribution, endemism, and vulnerability may underrepresent biologically unique species as well as their functional roles and evolutionary histories. To ensure that priorities are biologically comprehensive, multiple dimensions of diversity must be considered. Further, understanding how the different dimensions relate to one another spatially is important for conservation prioritization, but the relationship remains poorly understood. Here, we use spatial conservation planning to (i) identify and compare priority regions for global mammal conservation across three key dimensions of biodiversity—taxonomic, phylogenetic, and traits—and (ii) determine the overlap of these regions with the locations of threatened species and existing protected areas. We show that priority areas for mammal conservation exhibit low overlap across the three dimensions, highlighting the need for an integrative approach for biodiversity conservation. Additionally, currently protected areas poorly represent the three dimensions of mammalian biodiversity. We identify areas of high conservation priority among and across the dimensions that should receive special attention for expanding the global protected area network. These high-priority areas, combined with areas of high priority for other taxonomic groups and with social, economic, and political considerations, provide a biological foundation for future conservation planning efforts. PMID:28674013
Global priorities for conservation across multiple dimensions of mammalian diversity.
Brum, Fernanda T; Graham, Catherine H; Costa, Gabriel C; Hedges, S Blair; Penone, Caterina; Radeloff, Volker C; Rondinini, Carlo; Loyola, Rafael; Davidson, Ana D
2017-07-18
Conservation priorities that are based on species distribution, endemism, and vulnerability may underrepresent biologically unique species as well as their functional roles and evolutionary histories. To ensure that priorities are biologically comprehensive, multiple dimensions of diversity must be considered. Further, understanding how the different dimensions relate to one another spatially is important for conservation prioritization, but the relationship remains poorly understood. Here, we use spatial conservation planning to ( i ) identify and compare priority regions for global mammal conservation across three key dimensions of biodiversity-taxonomic, phylogenetic, and traits-and ( ii ) determine the overlap of these regions with the locations of threatened species and existing protected areas. We show that priority areas for mammal conservation exhibit low overlap across the three dimensions, highlighting the need for an integrative approach for biodiversity conservation. Additionally, currently protected areas poorly represent the three dimensions of mammalian biodiversity. We identify areas of high conservation priority among and across the dimensions that should receive special attention for expanding the global protected area network. These high-priority areas, combined with areas of high priority for other taxonomic groups and with social, economic, and political considerations, provide a biological foundation for future conservation planning efforts.
Workshop on Technology Development Issues for the Large Deployable Reflector (LDR)
NASA Technical Reports Server (NTRS)
Nishioka, Kenji (Editor)
1986-01-01
The results of the 2nd Large Deployable Reflector (LDR) Technology Review Workshop held at Asilomar, California, March 17 to 22, 1985, are summarized. The workshop was convened to update LDR Technology status and to revise as necessary the results for the first LDR Workshop held in June 1982. There were some 100 participants representing government agencies, industry, and universities. This Workshop's goal was to assess, identify, and set priorities for the LDR technology issues based on requirements identified in the first workshop. Four high-priority technology areas were identified: (1) mirror materials and construction; (2) sensing and controls; (3) system-simulation and modeling capability; and (4) submillimeter instruments. The results of the workshop were used to provide a list of technolgy issues for the development of a technology initiatives plan for the LDR by NASA's Office of Aeronautics and Space Technology.
75 FR 32122 - Revisions to Defense Priorities and Allocations System Regulations
Federal Register 2010, 2011, 2012, 2013, 2014
2010-06-07
...This proposed rule would reorganize and clarify existing standards and procedures by which the Bureau of Industry and Security (BIS) may require that certain contracts or orders that promote the national defense be given priority over other contracts or orders. This rule also sets new standards and procedures by which BIS may allocate materials, services and facilities to promote the national defense. BIS is publishing this rule to comply with a requirement of the Defense Production Act Reauthorization of 2009 to publish regulations providing standards and procedures for prioritization of contracts and orders and for allocation of materials, services and facilities to promote the national defense.
25 CFR Appendix A to Subpart C - IRR High Priority Project Scoring Matrix
Code of Federal Regulations, 2011 CFR
2011-04-01
... 25 Indians 1 2011-04-01 2011-04-01 false IRR High Priority Project Scoring Matrix A Appendix A to...—IRR High Priority Project Scoring Matrix Score 10 5 3 1 0 Accident and fatality rate for candidate...,000 or less 250,001-500,000 500,001-750,000 Over 750,000. Geographic isolation No external access to...
25 CFR Appendix A to Subpart C - IRR High Priority Project Scoring Matrix
Code of Federal Regulations, 2013 CFR
2013-04-01
... 25 Indians 1 2013-04-01 2013-04-01 false IRR High Priority Project Scoring Matrix A Appendix A to...—IRR High Priority Project Scoring Matrix Score 10 5 3 1 0 Accident and fatality rate for candidate...,000 or less 250,001-500,000 500,001-750,000 Over 750,000. Geographic isolation No external access to...
25 CFR Appendix A to Subpart C - IRR High Priority Project Scoring Matrix
Code of Federal Regulations, 2014 CFR
2014-04-01
... 25 Indians 1 2014-04-01 2014-04-01 false IRR High Priority Project Scoring Matrix A Appendix A to...—IRR High Priority Project Scoring Matrix Score 10 5 3 1 0 Accident and fatality rate for candidate...,000 or less 250,001-500,000 500,001-750,000 Over 750,000. Geographic isolation No external access to...
25 CFR Appendix A to Subpart C - IRR High Priority Project Scoring Matrix
Code of Federal Regulations, 2012 CFR
2012-04-01
... 25 Indians 1 2012-04-01 2011-04-01 true IRR High Priority Project Scoring Matrix A Appendix A to...—IRR High Priority Project Scoring Matrix Score 10 5 3 1 0 Accident and fatality rate for candidate...,000 or less 250,001-500,000 500,001-750,000 Over 750,000. Geographic isolation No external access to...
FY 2017 Grant Announcement: FY 2017 Sustainable Materials Management Grant
EPA Region 5 is soliciting applications to address one of two Sustainable Materials Management priorities identified below. Projects must be implemented in EPA Region 5, which encompasses the states of Illinois, Indiana, Ohio, Michigan, Minnesota, and Wisc
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-29
...' participation in training on intensive science teaching techniques presented by a professionally credentialed...)). The third priority is an invitational priority for applications that promote science, technology... priorities are: Invitational Priority 1--Science, Technology, Engineering and Mathematics (STEM) Education...
A Fair Contention Access Scheme for Low-Priority Traffic in Wireless Body Area Networks
Sajeel, Muhammad; Bashir, Faisal; Asfand-e-yar, Muhammad; Tauqir, Muhammad
2017-01-01
Recently, wireless body area networks (WBANs) have attracted significant consideration in ubiquitous healthcare. A number of medium access control (MAC) protocols, primarily derived from the superframe structure of the IEEE 802.15.4, have been proposed in literature. These MAC protocols aim to provide quality of service (QoS) by prioritizing different traffic types in WBANs. A contention access period (CAP)with high contention in priority-based MAC protocols can result in higher number of collisions and retransmissions. During CAP, traffic classes with higher priority are dominant over low-priority traffic; this has led to starvation of low-priority traffic, thus adversely affecting WBAN throughput, delay, and energy consumption. Hence, this paper proposes a traffic-adaptive priority-based superframe structure that is able to reduce contention in the CAP period, and provides a fair chance for low-priority traffic. Simulation results in ns-3 demonstrate that the proposed MAC protocol, called traffic- adaptive priority-based MAC (TAP-MAC), achieves low energy consumption, high throughput, and low latency compared to the IEEE 802.15.4 standard, and the most recent priority-based MAC protocol, called priority-based MAC protocol (PA-MAC). PMID:28832495
DOE Office of Scientific and Technical Information (OSTI.GOV)
Piechowicz, Marek; Abney, Carter W.; Thacker, Nathan C.
The amidoxime group (-RNH2NOH) has long been used to extract uranium from seawater on account of its high affinity toward uranium. The development of tunable sorbent materials for uranium sequestration remains a research priority as well as a significant challenge. Herein, we report the design, synthesis, and uranium sorption properties of bis-amidoxime-functionalized polymeric materials (BAP 1–3). Bifunctional amidoxime monomers were copolymerized with an acrylamide cross-linker to obtain bis-amidoxime incorporation as high as 2 mmol g–1 after five synthetic steps. The resulting sorbents were able to uptake nearly 600 mg of uranium per gram of polymer after 37 days of contactmore » with a seawater simulant containing 8 ppm uranium. Moreover, the polymeric materials exhibited low vanadium uptake with a maximum capacity of 128 mg of vanadium per gram of polymer. This computationally predicted and experimentally realized selectivity of uranium over vanadium, nearly 5 to 1 w/w, is one of the highest reported to date and represents an advancement in the rational design of sorbent materials with high uptake capacity and selectivity.« less
STS-107 Columbia rollout to Launch Pad 39A
NASA Technical Reports Server (NTRS)
2002-01-01
KENNEDY SPACE CENTER, FLA. -- Space Shuttle Columbia, framed by trees near the Banana River, rolls towards Launch Pad 39A, sitting atop the Mobile Launcher Platform, which in turn is carried by the crawler-transporter underneath. The STS-107 research mission comprises experiments ranging from material sciences to life sciences (many rats), plus the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) that incorporates eight high priority secondary attached shuttle experiments. Mission STS-107 is scheduled to launch Jan. 16, 2003.
Overview of innovative PMI research on NSTX-U and associated PMI facilities at PPPL
M. Ono; Jaworski, M.; Kaita, R.; ...
2013-05-01
Developing a reactor compatible divertor and managing the associated plasma material interaction (PMI) has been identified as a high priority research area for magnetic confinement fusion. Accordingly on NSTX-U, the PMI research has received a strong emphasis. Moreover, with ˜15 MW of auxiliary heating power, NSTX-U will be able to test the PMI physics with the peak divertor plasma facing component (PFC) heat loads of up to 40-60 MW/m 2.
Priority service needs and receipt across the lifespan for individuals with autism spectrum disorder
Lai, Jonathan K. Y.
2017-01-01
Abstract Individuals with Autism Spectrum Disorder (ASD) have a range of health, community, and social support needs across the lifespan that create age‐specific challenges in navigating service sectors. In this study, we set out to identify the priority needs of individuals with ASD across the lifespan, and the factors that predict receiving priority services. Participants included 3,317 individuals with ASD from a Canada‐wide online caregiver survey, stratified into five age groups (preschool, elementary school age, adolescence, emerging adulthood, adulthood). Priority receipt was calculated as a ratio of current services that corresponded to individualized priority need. Age‐stratified Poisson regression analyses were used to identify the sociodemographic, clinical and systemic predictors of priority receipt. Results indicate that the distribution of priority need varied by age, except for social skills programming, which was a high across all groups. The number of high and moderate priority needs diversified with age. Overall, 30% of individuals had none of their priority needs met and priority receipt decreased with age. Systemic factors were most consistently related to priority receipt across the lifespan. Understanding patterns and correlates of priority needs and use that currently exist in different age groups can inform policies to improve service access. Autism Res 2017, 10: 1436–1447. © 2017 International Society for Autism Research, Wiley Periodicals, Inc. PMID:28383156
Rupp, Michael T
2002-01-01
To define programmatic objectives and initial operational priorities for CommuniRes, a university-based education and support service designed to help community pharmacists successfully implement and sustain community pharmacy residency programs (CPRPs). Advisory committee of nationally recognized experts in CPRPs in a small-group planning session. CPRPs are postgraduate clinical training experiences conducted in chain and independent community pharmacies. The nominal group technique (NGT), a structured approach to group planning and decision making, was used to identify and prioritize the needs of CPRPs. Results of the NGT exercise were used as input to a brainstorming session that defined specific CommuniRes services and resources that must be developed to meet high priority needs of CPRPs. Group consensus on the priority needs of CPRPs was determined through rank order voting. The advisory committee identified 20 separate CPRP needs that it believed must be met to ensure that CPRPs will be successful and sustainable. Group voting resulted in the selection of six needs that were considered to be consensus priorities for services and resources provided through CommuniRes: image parity for CPRPs; CPRP marketing materials; attractive postresidency employment opportunities; well-defined goals, objectives, and residency job descriptions; return on investment and sources of ongoing funding for the residency; and opportunities and mechanisms for communicating/networking with other residents and preceptors. The needs-based programmatic priorities defined by the advisory committee are now being implemented through a tripartite program consisting of live training seminars for CPRP preceptors and directors, an Internet site (www.communires.com), and a host of continuing support services available to affiliated CPRP sites. Future programmatic planning will increasingly involve CPRP preceptors, directors, and former residents to determine the ongoing needs of CPRPs.
1974-07-01
elec- Materials se: trode materials and associ- operational ated conductors. 2.5.1 General. H" (02) Materials resources Technoeconomic analysis - None...Advanced Energy Systems Using New Fnels VIII Correlation and Analysis of Materials Requirements IX Research Recommendations and Priorities The authois...of government and industrial organizal ions who gave us the benefit of their knowledge and experience. iv VIII CORRELATION ANU ANALYSIS OF MATERIALS
DOE Office of Scientific and Technical Information (OSTI.GOV)
Keller, Jay; Hill, Laura; Kiuru, Kristian
The HySafe research priorities workshop is held on the even years between the International Conference on Hydrogen Safety (ICHS) which is held on the odd years. The research priorities workshop is intended to identify the state-of-the-art in understanding of the physical behavior of hydrogen and hydrogen systems with a focus on safety. Typical issues addressed include behavior of unintended hydrogen releases, transient combustion phenomena, effectiveness of mitigation measures, and hydrogen effects in materials. In the workshop critical knowledge gaps are identified. Areas of research and coordinated actions for the near and medium term are derived and prioritized from these knowledgemore » gaps. The stimulated research helps pave the way for the rapid and safe deployment of hydrogen technologies on a global scale. To support the idea of delivering globally accepted research priorities for hydrogen safety the workshop is organized as an internationally open meeting. In attendance are stakeholders from the academic community (universities, national laboratories), funding agencies, and industry. The industry participation is critically important to ensure that the research priorities align with the current needs of the industry responsible for the deployment of hydrogen technologies. This report presents the results of the HySafe Research Priorities Workshop held in Washing- ton, D.C. on November 10-11, 2014. At the workshop the participants presented updates (since the previous workshop organized two years before in Berlin, Germany) of their research and development work on hydrogen safety. Following the workshop, participants were asked to provide feedback on high-priority topics for each of the research areas discussed and to rank research area categories and individual research topics within these categories. The research areas were ranked as follows (with the percentage of the vote in parenthesis): 1. Quantitative Risk Assessment (QRA) Tools (23%) 2. Reduced Model Tools (15%) 3. Indoor (13%) 4. Unintended Release-Liquid (11%) 5. Unintended Release-Gas (8%) 6. Storage (8%) 7. Integration Platforms (7%) 8. Hydrogen Safety Training (7%) 9. Materials Compatibility/Sensors (7%) 10. Applications (2%) The workshop participants ranked the need for Quantitative Risk Analysis (QRA) tools as the top priority by a large margin. QRA tools enable an informed expert to quantify the risk asso- ciated with a particular hydrogen system in a particular scenario. With appropriate verification and validation such tools will enable: * system designers to achieve a desired level of risk with suitable risk mitigation strategies, * permitting officials to determine if a particular system installation meets the desired risk level (performance based Regulations, Codes, and Standards (RCS) rather than prescrip- tive RCS), and * allow code developers to develop code language based on rigorous and validated physical models, statistics and standardized QRA methodologies. Another important research topic identified is the development of validated reduced physical models for use in the QRA tools. Improvement of the understanding and modeling of specific release phenomena, in particular liquid releases, are also highly ranked research topics. Acknowledgement The International Association HySafe, represented here by the authors, would like to thank all participants of the workshop for their valuable contributions. Particularly appreciated is the active participation of the industry representatives and the steady support by the European Com- mission's Joint Research Centre (JRC). Deep gratitude is owed for the great support by the United States Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy's Fuel Cell Technologies Office (EERE/FCTO) for the organization of the 2014 version of the hydrogen safety research priorities workshop. This page intentionally left blank.« less
Lee, Susan K; Sulaiman-Hill, Cheryl M R; Thompson, Sandra C
2013-08-01
Preferences for topics and means of access to health information among newly arrived, culturally and linguistically diverse women in Perth, Western Australia, were explored. A mixed-methods approach was adopted. Qualitative material obtained from focus groups and interviews with 22 service providers and 26 migrant women was used to develop a questionnaire, which was then administered to 268 newly arrived migrant and refugee women from 50 countries. Participants' information and support priorities were ascertained from a ranking exercise conducted in a non-threatening context. Responses of migrant and refugee women were compared quantitatively. Women's top priorities for information and support included employment advice, as well as information regarding mental health issues, women's health, exercise and nutrition, family violence and alcohol and other drug issues. Their preferred methods for receiving information were interactive talks or presentations, with written material support. Audiovisual and Web-based material were also considered useful. There were differences between refugee women's and other migrants' preferences for means of receiving information and topics of most concern. The use of a non-threatening ranking process encouraged women to prioritise sensitive topics, such as family violence, and revealed a need for such topics to be incorporated within general health information presentations. Internet-based technologies are becoming increasingly important methods for disseminating information to migrant women. SO WHAT? Differences between migrant and refugee women's priority health issues and their preferred methods for receiving information highlight the desirability of tailoring information to particular groups. Although advice on employment pathways and mental health concerns were top priorities, the study revealed a need for more discussion on other sensitive topics, such as family violence and alcohol-related issues, and that ideally these should be incorporated into general information sessions to destigmatise attendance The increasing relevance of computer technology and social media for information dissemination was also of note.
ERIC Educational Resources Information Center
George, Gail, Ed.
These resource materials are a part of a larger plan for groundwater education, as detailed in the Iowa Groundwater Education Strategy. The six units are arranged in priority order. The first unit covers the basics of groundwater and hydrogeology in Iowa. The other five units cover Iowa's groundwater issues in priority order, as outlined in the…
Internal Uses of the RLG Conspectus.
ERIC Educational Resources Information Center
Ferguson, Anthony W.; And Others
1987-01-01
Considers 10 areas of internal operations in which the Research Libraries Group/North American Collection Inventory Project (RLF/NCIP) Conspectus can be used as a management aid: collection priorities, collection management, space utilization, preservation programs, staffing allocations, material fund requests, accreditation, materials selection,…
A survey of time management and particular tasks undertaken by consultant microbiologists in the UK.
Riordan, Terry; Cartwright, Keith; Cunningham, Richard; Logan, Margaret; Wright, Paul
2007-05-01
Medical microbiology practice encompasses a diverse range of activities. Consultant medical microbiologists (CMMs) attribute widely differing priorities to, and spend differing proportions of time on various components of the job. To obtain a professional consensus on what are high-priority and low-priority activities, and to identify the time spent on low-priority activities. National survey. Many respondents felt that time spent on report authorisation and telephoning of results was excessive, whereas time spent on ward-based work was inadequate. Timesaving could also be achieved through better prioritisation of infection-control activities. CMMs should apportion their time at work focusing on high-priority activities identified through professional consensus.
Genetic basis of priority effects: insights from nectar yeast
Hartwig, Thomas
2016-01-01
Priority effects, in which the order of species arrival dictates community assembly, can have a major influence on species diversity, but the genetic basis of priority effects remains unknown. Here, we suggest that nitrogen scavenging genes previously considered responsible for starvation avoidance may drive priority effects by causing rapid resource depletion. Using single-molecule sequencing, we de novo assembled the genome of the nectar-colonizing yeast, Metschnikowia reukaufii, across eight scaffolds and complete mitochondrion, with gap-free coverage over gene spaces. We found a high rate of tandem gene duplication in this genome, enriched for nitrogen metabolism and transport. Both high-capacity amino acid importers, GAP1 and PUT4, present as tandem gene arrays, were highly expressed in synthetic nectar and regulated by the availability and quality of amino acids. In experiments with competitive nectar yeast, Candida rancensis, amino acid addition alleviated suppression of C. rancensis by early arrival of M. reukaufii, corroborating that amino acid scavenging may contribute to priority effects. Because niche pre-emption via rapid resource depletion may underlie priority effects in a broad range of microbial, plant and animal communities, nutrient scavenging genes like the ones we considered here may be broadly relevant to understanding priority effects. PMID:27708148
Li, Fei; Huang, Jinhui; Zeng, Guangming; Huang, Xiaolong; Liu, Wenchu; Wu, Haipeng; Yuan, Yujie; He, Xiaoxiao; Lai, Mingyong
2015-05-01
Spatial characteristics of the properties (dust organic material and pH), concentrations, and enrichment levels of toxic metals (Ni, Hg, Mn and As) in street dust from Xiandao District (Middle China) were investigated. Method of incorporating receptor population density into noncarcinogenic health risk assessment based on local land use map and geostatistics was developed to identify their priority pollutants/regions of concern. Mean enrichment factors of studied metals decreased in the order of Hg ≈ As > Mn > Ni. For noncarcinogenic effects, the exposure pathway which resulted in the highest levels of exposure risk for children and adults was ingestion except Hg (inhalation of vapors), followed by dermal contact and inhalation. Hazard indexes (HIs) for As, Hg, Mn, and Ni to children and adults revealed the following order: As > Hg > Mn > Ni. Mean HI for As exceeded safe level (1) for children, and the maximum HI (0.99) for Hg was most approached the safe level. Priority regions of concern were indentified in A region at each residential population density and the areas of B at high and moderate residential population density for As and the high residential density area within A region for Hg, respectively. The developed method was proved useful due to its improvement on previous study for making the priority areas of environmental management spatially hierarchical and thus reducing the probability of excessive environmental management.
Weeks, R; Adams, V M
2018-02-01
For conservation science to effectively inform management, research must focus on creating the scientific knowledge required to solve conservation problems. We identified research questions that, if answered, would increase the effectiveness of conservation and natural resource management practice and policy in Oceania's small-island developing states. We asked conservation professionals from academia, governmental, and nongovernmental organizations across the region to propose such questions and then identify which were of high priority in an online survey. We compared the high-priority questions with research questions identified globally and for other regions. Of 270 questions proposed by respondents, 38 were considered high priority, including: What are the highest priority areas for conservation in the face of increasing resource demand and climate change? How should marine protected areas be networked to account for connectivity and climate change? What are the most effective fisheries management policies that contribute to sustainable coral reef fisheries? High-priority questions related to the particular challenges of undertaking conservation on small-island developing states and the need for a research agenda that is responsive to the sociocultural context of Oceania. Research priorities for Oceania relative to elsewhere were broadly similar but differed in specific issues relevant to particular conservation contexts. These differences emphasize the importance of involving local practitioners in the identification of research priorities. Priorities were reasonably well aligned among sectoral groups. Only a few questions were widely considered answered, which may indicate a smaller-than-expected knowledge-action gap. We believe these questions can be used to strengthen research collaborations between scientists and practitioners working to further conservation and natural resource management in this region. © 2017 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.
Summary and recommendations for the NASA/MIT workshop on short haul air transport
NASA Technical Reports Server (NTRS)
Simpson, R. W.
1971-01-01
The material is summarized that was covered by the MIT/NASA Waterville Valley workshop which dealt with the institutional, socio-economic, operational and technological problems associated with introducing new forms of short haul domestic air transportation. It was found that future air systems hold great potential in satisfying society's needs for a low noise, low landspace, high access, high speed, large network system for public travel over distances between 5 and 500 miles. It is concluded that quiet air systems are necessary for obtaining community approval, and is recommended that extremely high priority be assigned to the development of quiet aircraft for future short haul air systems.
A Priority-Based View of Future Challenges in International Nuclear Safeguards.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Matteucci, Kayla
The international nuclear safeguards community is faced with a host of challenges in the coming years, many of which have been outlined but have not been described in terms of their urgency. Literature regarding safeguards challenges is either broad and devoid of any reference to prioritization or tailored to a specific problem and removed from the overall goals of the safeguards community. For example, developing new methods of environmental sampling, improving containment and surveillance (C/S) technologies to increase efficiency and decrease inspection time, advancing nuclear material accountancy (NMA) techniques, and planning safeguards approaches for new types of nuclear facilities aremore » all important. They have not, however, been distinctly prioritized at a high level within the safeguards community. Based on a review of existing literature and interviews with experts on these upcoming challenges, this paper offers a high-level summary of present and future priorities in safeguards, with attention both to what is feasible and to what is most imperative. In doing so, the paper addresses the potential repercussions for failing to prioritize, with a focus on the risk of diversion of nuclear material. Within the context of shifts in the American political landscape, and keeping in mind that nonproliferation issues may take a backseat to others in the near future, a prioritized view of safeguards objectives will be vital. In the interest of expanding upon this work, the paper offers several potential conceptual models for prioritization which can be explored in greater depth upon further research.« less
ERIC Educational Resources Information Center
Kimmons, Royce
2017-01-01
This study seeks to evaluate the basic Priority 1 web accessibility of all college and university websites in the US (n = 3141). Utilizing web scraping and automated content analysis, the study establishes that even in the case of high-priority, simple-to-address accessibility requirements, colleges and universities generally fail to make their…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-09-28
... higher priority listing activities. A listing priority of 5 is assigned to species with high magnitude... number for Gunnison sage-grouse as a 2. A listing priority number of 2 is assigned to species with high... that are rich in calcium, phosphorous, and protein to meet the nutritional needs of females during the...
Code of Federal Regulations, 2014 CFR
2014-01-01
... ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC... that such supplies of materials and equipment, services, or facilities are critical and essential to... are critical and essential was delegated to the Secretary of Energy pursuant to E.O. 12919 (59 FR...
10 CFR 216.4 - Evaluation by DOE of applications.
Code of Federal Regulations, 2011 CFR
2011-01-01
... Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS... described supplies of materials and equipment, services, or facilities are critical and essential to the... and equipment, services, or facilities described in the application are critical and essential to an...
10 CFR 216.4 - Evaluation by DOE of applications.
Code of Federal Regulations, 2014 CFR
2014-01-01
... Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS... described supplies of materials and equipment, services, or facilities are critical and essential to the... and equipment, services, or facilities described in the application are critical and essential to an...
Code of Federal Regulations, 2011 CFR
2011-01-01
... ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC... that such supplies of materials and equipment, services, or facilities are critical and essential to... are critical and essential was delegated to the Secretary of Energy pursuant to E.O. 12919 (59 FR...
10 CFR 216.4 - Evaluation by DOE of applications.
Code of Federal Regulations, 2013 CFR
2013-01-01
... Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS... described supplies of materials and equipment, services, or facilities are critical and essential to the... and equipment, services, or facilities described in the application are critical and essential to an...
Code of Federal Regulations, 2013 CFR
2013-01-01
... ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC... that such supplies of materials and equipment, services, or facilities are critical and essential to... are critical and essential was delegated to the Secretary of Energy pursuant to E.O. 12919 (59 FR...
Code of Federal Regulations, 2012 CFR
2012-01-01
... ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC... that such supplies of materials and equipment, services, or facilities are critical and essential to... are critical and essential was delegated to the Secretary of Energy pursuant to E.O. 12919 (59 FR...
10 CFR 216.4 - Evaluation by DOE of applications.
Code of Federal Regulations, 2012 CFR
2012-01-01
... Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS... described supplies of materials and equipment, services, or facilities are critical and essential to the... and equipment, services, or facilities described in the application are critical and essential to an...
FY 2016 Grant Announcement: FY 2016 Sustainable Materials Management Grants
EPA Region 7 is soliciting applications to address one or more of the three national Sustainable Materials Management Priorities identified & that have Region-wide reach or target activities in one or more of the Region 7 “Making a Visible Difference” etc.
10 CFR 216.4 - Evaluation by DOE of applications.
Code of Federal Regulations, 2010 CFR
2010-01-01
... Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS... described supplies of materials and equipment, services, or facilities are critical and essential to the... and equipment, services, or facilities described in the application are critical and essential to an...
Code of Federal Regulations, 2010 CFR
2010-01-01
... ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC... that such supplies of materials and equipment, services, or facilities are critical and essential to... are critical and essential was delegated to the Secretary of Energy pursuant to E.O. 12919 (59 FR...
ERIC Educational Resources Information Center
Department of Health, Education, and Welfare, Washington, DC.
The low priority according to children and families in our way of life is reflected in policies and actions at national, state, and local levels. We like to think of America as a child-oriented society but, in fact, our priorities lie more in the pursuit of affluence, and the worship of material things and technology. A broken television set or a…
Scientific Contributions to GEO Global Earth Observation Priorities
NASA Astrophysics Data System (ADS)
Friedl, L.; Ledrew, E.
2009-12-01
Numerous counties and non-governmental organizations have produced documents, held workshops, and published reports in the past decade that identify Earth observation needs to meet their particular objectives. The Group on Earth Observations (GEO) has conducted a review of these documents, workshops, and reports to identify the priority observations common to many societal benefit areas. GEO has made a concerted effort to include materials from a broad range of user types, including scientific researchers, resource managers, and policy makers. GEO has also sought an international breadth in the materials reviewed, including observation priorities from developing countries. The activity will help GEO optimize the observations in GEOSS that are most likely to provide societal benefits, and GEO members will use the results of this meta-analysis to support investment decisions. The Earth observations in GEOSS serve scientific research and applications endeavors. As a primary user of ground-based, airborne, in situ, and space-based observations of the Earth, the scientific community has a significant voice and vested interest in the observations offered through GEOSS. Furthermore, the science and technology community will have opportunities to identify critical scientific/technological advances needed to produce any observations that are needed yet not currently available. In this paper, we will discuss this GEO effort to identify Earth observations priorities. We will present initial findings for some societal benefit areas and the overall meta-analysis. We will also discuss possible roles for the science and technology community to contribute to those priorities, such as scientific advances needed to achieve the observations or to realize societal benefits from the observations.
NASA Astrophysics Data System (ADS)
Carey, Elizabeth M.; Peters, Gregory H.; Choukroun, Mathieu; Chu, Lauren; Carpenter, Emma; Cohen, Brooklin; Panossian, Lara; Zhou, Yu Meng; Sarkissian, Ani; Moreland, Scott; Shiraishi, Lori R.; Backes, Paul; Zacny, Kris; Green, Jacklyn R.; Raymond, Carol
2017-11-01
Comets are icy remnants of the Solar System formation, and as such contain some of the most primitive volatiles and organic materials. Sampling the surface of a comet is a high priority for the New Frontiers program. Planetary simulants are crucial to the development of adequate in situ instruments and sample acquisition systems. A high-fidelity comet surface simulant has been developed to support hardware design and development for one Comet Surface Sample Return tool, the BiBlade Comet Sampler. Mechanical Porous Ambient Comet Simulants (MPACS) can be manufactured to cover a wide range of desired physical properties, such as density and cone penetration resistance, and exhibit a brittle fracture mode. The structure of the MPACS materials is an aggregated composite structure of weakly-bonded grains of very small size (diameter ≤ 40 μm) that are most relevant to the structure of the surface of a comet nucleus.
Water quality monitoring for high-priority water bodies in the Sonoran Desert network
Terry W. Sprouse; Robert M. Emanuel; Sara A. Strorrer
2005-01-01
This paper describes a network monitoring program for âhigh priorityâ water bodies in the Sonoran Desert Network of the National Park Service. Protocols were developed for monitoring selected waters for ten of the eleven parks in the Network. Park and network staff assisted in identifying potential locations of testing sites, local priorities, and how water quality...
Life satisfaction across nations: the effects of women's political status and public priorities.
York, Richard; Bell, Shannon Elizabeth
2014-11-01
Feminist scholars suggest that improving the quality of life of individuals living in nations around the world may be more readily achieved by increasing women's political power and by reorienting public-policy priorities, than by focusing primarily on economic growth. These considerations raise the question of which characteristics of societies are associated with the quality of life of the people in those societies. Here, we address this issue empirically by statistically analyzing cross-national data. We assess the effects of gender equality in the political sphere, as well as a variety of other factors, on the subjective well-being of nations, as indicated by average self-reported levels of life satisfaction. We find that people report the highest levels of life satisfaction in nations where women have greater political representation, where military spending is low, and where health care spending is high, controlling for a variety of other factors. GDP per capita, urbanization, and natural resource exploitation are not clearly associated with life satisfaction. These findings suggest that nations may be able to improve the subjective quality of life of people without increasing material wealth or natural resource consumption by increasing gender equality in politics and changing public spending priorities. Copyright © 2014 Elsevier Inc. All rights reserved.
Nanomaterials in consumer's goods: the problems of risk assessment
NASA Astrophysics Data System (ADS)
Gmoshinski, I. V.; Khotimchenko, S. A.
2015-11-01
Nanotechnology and engineered nanomaterials are currently used in wide variety of cosmetic products, while their use in food industry, packaging materials, household chemicals etc. still includes a limited number of items and does not show a significant upward trend. However, the problem of priority nanomaterials associated risks is relevant due to their high production volumes and an constantly growing burden on the environment and population. In accordance with the frequency of use in mass-produced consumer goods, leading priority nanomaterials are silver nanoparticles (NPs) and (by a wide margin) NPs of gold, platinum, and titanium dioxide. Frequency of nanosized silica introduction into food products as a food additive, at the moment, seems to be underestimated, since the use of this nanomaterial is not declared by manufacturers of products and objective control of its content is difficult. Analysis of literature data on toxicological properties of nanomaterials shows that currently accumulated amount of information is sufficient to establish the safe doses of nanosized silver, gold and titanium dioxide. Data have been provided in a series of studies concerning the effect of oral intake of nanosized silica on the condition of laboratory animals, including on the performance of the immune system. The article examines the existing approaches to the assessment of population exposure to priority nanomaterials, characteristics of existing problems and risk management.
Development and use of role model stories in a community level HIV risk reduction intervention.
Corby, N H; Enguídanos, S M; Kay, L S
1996-01-01
A theory-based HIV prevention intervention was implemented as part of a five-city AIDS Community Demonstration Project for the development and testing of a community-level intervention to reduce AIDS risk among historically underserved groups. This intervention employed written material containing stories of risk-reducing experiences of members of the priority populations, in this case, injecting drug users, their female sex partners, and female sex workers. These materials were distributed to members of these populations by their peers, volunteers from the population who were trained to deliver social reinforcement for interest in personal risk reduction and the materials. The participation of the priority populations in the development and implementation of the intervention was designed to increase the credibility of the intervention and the acceptance of the message. The techniques involved in developing role-model stories are described in this paper. PMID:8862158
1998-09-30
The Electrostatic Levitator (ESL) Facility established at Marshall Space Flight Center (MSFC) supports NASA's Microgravity Materials Science Research Program. NASA materials science investigations include ground-based, flight definition and flight projects. Flight definition projects, with demanding science concept review schedules, receive highest priority for scheduling experiment time in the Electrostatic Levitator (ESL) Facility.
ERIC Educational Resources Information Center
Brozis, Mirosaw; Swiderski, Kamil
2018-01-01
Our students built a full-size, mobile planetarium in three weeks. The planetarium was built with commonly available, cheap construction materials. Our priorities were mobility, possibility of quick assembly and reassembly and the students' availability of materials in every place in the world. The students calculated all the parameters of the…
Dynamic autonomous routing technology for IP-based satellite ad hoc networks
NASA Astrophysics Data System (ADS)
Wang, Xiaofei; Deng, Jing; Kostas, Theresa; Rajappan, Gowri
2014-06-01
IP-based routing for military LEO/MEO satellite ad hoc networks is very challenging due to network and traffic heterogeneity, network topology and traffic dynamics. In this paper, we describe a traffic priority-aware routing scheme for such networks, namely Dynamic Autonomous Routing Technology (DART) for satellite ad hoc networks. DART has a cross-layer design, and conducts routing and resource reservation concurrently for optimal performance in the fluid but predictable satellite ad hoc networks. DART ensures end-to-end data delivery with QoS assurances by only choosing routing paths that have sufficient resources, supporting different packet priority levels. In order to do so, DART incorporates several resource management and innovative routing mechanisms, which dynamically adapt to best fit the prevailing conditions. In particular, DART integrates a resource reservation mechanism to reserve network bandwidth resources; a proactive routing mechanism to set up non-overlapping spanning trees to segregate high priority traffic flows from lower priority flows so that the high priority flows do not face contention from low priority flows; a reactive routing mechanism to arbitrate resources between various traffic priorities when needed; a predictive routing mechanism to set up routes for scheduled missions and for anticipated topology changes for QoS assurance. We present simulation results showing the performance of DART. We have conducted these simulations using the Iridium constellation and trajectories as well as realistic military communications scenarios. The simulation results demonstrate DART's ability to discriminate between high-priority and low-priority traffic flows and ensure disparate QoS requirements of these traffic flows.
Jaramillo, Alejandra; Welch, Vivian A; Ueffing, Erin; Gruen, Russell L; Bragge, Peter; Lyddiatt, Anne; Tugwell, Peter
2013-05-01
To identify high-priority research questions for osteoarthritis systematic reviews with consideration of health equity and the social determinants of health (SDH). We consulted with experts and conducted a literature search to identify a priority-setting method that could be adapted to address the health equity and SDH. We selected the Global Evidence Mapping priority-setting method, and through consultations and consensus, we adapted the method to meet our objectives. This involves developing an evidence map of the existing systematic reviews on osteoarthritis; conducting one face-to-face workshop with patients and another one with clinicians, researchers, and patients; and conducting an online survey of patients to rank the top 10 research questions. We piloted the adapted method with the Cochrane Musculoskeletal Review Group to set research priorities for osteoarthritis. Our focus was on systematic reviews: we identified 34 high-priority research questions for osteoarthritis systematic reviews. Prevention and self-management interventions, mainly diet and exercise, are top priorities for osteoarthritis systematic reviews. Evaluation against our predefined objectives showed that this method did prioritize SDH (50% of the research questions considered SDH). There were marked gaps: no high-priority topics were identified for access to care until patients had advanced disease-lifestyle changes once the disease was diagnosed. This method was felt feasible if conducted annually. We confirmed the utility of an adapted priority-setting method that is feasible and considers SDH. Further testing of this method is needed to assess whether considerations of health equity are prioritized and involve disadvantaged groups of the population. Copyright © 2013 Elsevier Inc. All rights reserved.
Recommended Priorities for NASA's Gamma Ray Astronomy Program 1999-2013
NASA Technical Reports Server (NTRS)
Carol, Ladd
1999-01-01
The Gamma-Ray Astronomy Program Working Group (GRAPWG) recommends priorities for the NASA Gamma-Ray Astronomy Program. The highest priority science topic is nuclear astrophysics and sites of gamma ray line emission. Other high priority topics are gamma ray bursts, hard x-ray emission from accreting black holes and neutron stars, the Advanced Compton Telescope (ACT), the High-resolution Spectroscopic Imager (HSI), and the Energetic X-ray Imaging Survey Telescope (EXIST). The recommendations include special consideration for technology development, TeV astronomy, the ultra-long duration balloon (ULDB) program, the International Space Station, optical telescope support, and data analysis and theory.
ERIC Educational Resources Information Center
Latham, Glenn
Presented is the report of a study -- involving 1150 special education teachers and 25 instructional materials centers (IMCs) and learning resource centers (LRCs) -- to investigate the needs for, uses of, and priorities for instructional materials for teaching handicapped children. Listed are three methods of data collection: the use of materials…
Rehabilitation priorities for individuals with Prader-Willi Syndrome.
Pituch, Keenan A; Green, Vanessa A; Didden, Robert; Lang, Russell; O'Reilly, Mark F; Lancioni, Giulio E; Whittle, Lisa; Hodis, Flaviu; Sigafoos, Jeff
2010-01-01
To identify rehabilitation priorities that parents have for their children, including their adult-aged children, with Prader-Willi Syndrome (PWS) and to determine the relation between these priorities and the child's levels of adaptive behaviour functioning. Parents involved in organisations related to PWS were invited to complete an online survey. The survey listed 54 skills/behaviours (e.g. toileting, expresses wants and needs and tantrums) representing 10 adaptive functioning domains (e.g. self-care, communication and problem behaviour). Parents rated their child's current level of ability/performance with respect to each skill/behaviour and indicated the extent to which training/treatment was a priority. Fifty-eight surveys were completed during the 4-month data collection period. Parents identified nine high-priority skills/behaviours from five different adaptive functioning domains. For most domains, parent priorities showed a significant linear relation to the children's adaptive behaviour deficits, in that priorities reflected areas where the child had the greatest deficits and the most problematic behaviours. Rehabilitation professionals should focus on the eating issues that arise in PWS and identify the adaptive functioning deficits of these individuals because such deficits are high-priority areas for parents.
Tacconelli, Evelina; Carrara, Elena; Savoldi, Alessia; Harbarth, Stephan; Mendelson, Marc; Monnet, Dominique L; Pulcini, Céline; Kahlmeter, Gunnar; Kluytmans, Jan; Carmeli, Yehuda; Ouellette, Marc; Outterson, Kevin; Patel, Jean; Cavaleri, Marco; Cox, Edward M; Houchens, Chris R; Grayson, M Lindsay; Hansen, Paul; Singh, Nalini; Theuretzbacher, Ursula; Magrini, Nicola
2018-03-01
The spread of antibiotic-resistant bacteria poses a substantial threat to morbidity and mortality worldwide. Due to its large public health and societal implications, multidrug-resistant tuberculosis has been long regarded by WHO as a global priority for investment in new drugs. In 2016, WHO was requested by member states to create a priority list of other antibiotic-resistant bacteria to support research and development of effective drugs. We used a multicriteria decision analysis method to prioritise antibiotic-resistant bacteria; this method involved the identification of relevant criteria to assess priority against which each antibiotic-resistant bacterium was rated. The final priority ranking of the antibiotic-resistant bacteria was established after a preference-based survey was used to obtain expert weighting of criteria. We selected 20 bacterial species with 25 patterns of acquired resistance and ten criteria to assess priority: mortality, health-care burden, community burden, prevalence of resistance, 10-year trend of resistance, transmissibility, preventability in the community setting, preventability in the health-care setting, treatability, and pipeline. We stratified the priority list into three tiers (critical, high, and medium priority), using the 33rd percentile of the bacterium's total scores as the cutoff. Critical-priority bacteria included carbapenem-resistant Acinetobacter baumannii and Pseudomonas aeruginosa, and carbapenem-resistant and third-generation cephalosporin-resistant Enterobacteriaceae. The highest ranked Gram-positive bacteria (high priority) were vancomycin-resistant Enterococcus faecium and meticillin-resistant Staphylococcus aureus. Of the bacteria typically responsible for community-acquired infections, clarithromycin-resistant Helicobacter pylori, and fluoroquinolone-resistant Campylobacter spp, Neisseria gonorrhoeae, and Salmonella typhi were included in the high-priority tier. Future development strategies should focus on antibiotics that are active against multidrug-resistant tuberculosis and Gram-negative bacteria. The global strategy should include antibiotic-resistant bacteria responsible for community-acquired infections such as Salmonella spp, Campylobacter spp, N gonorrhoeae, and H pylori. World Health Organization. Copyright © 2018 Elsevier Ltd. All rights reserved.
Gfr Core Neutronics Studies at CEA
NASA Astrophysics Data System (ADS)
Bosq, J. C.; Brun-Magaud, V.; Rimpault, G.; Tommasi, J.; Conti, A.; Garnier, J. C.
2006-04-01
The Gas cooled Fast Reactor (GFR) is a high priority in the CEA R&D program on Future Nuclear Energy Systems. After preliminary neutronics and thermo-aerolic studies, a first He-cooled 2400MWth core design based on a series of carbide CERCER plates arranged in an hexagonal wrapper were selected. Although GFR subassembly and core design studies are still at an early stage of development, it is nonetheless possible to identify a number of nuclear data needs that could have some impact on the actual design: new materials, decay heat contributors….
NASA Astrophysics Data System (ADS)
Pollock, Tresa; Handwerker, Carol
In the next decade, fundamental research in metals and metallic nanostructures (MMN) has the potential to continue to transform science into innovative materials, devices, and systems. This talk summarizes the findings of a workshop to identify emerging and potentially transformative research areas in MMN. The metals and metallic nanostructures (MMNs) workshop aimed to identify significant research trends, scientific fundamentals, and recent breakthroughs that can enable new or enhanced MMN performance, either alone or in a more complex materials system, for a wide range of applications. Additionally, the role that MMN research can play in high-priority research and development (R&D) areas such as the U.S. Materials Genome Initiative, the National Nanotechnology Initiative, the Advanced Manufacturing Initiative, and other similar initiatives that exist internationally was assessed. The workshop also addressed critical issues related to materials research instrumentation and the cyberinfrastructure for materials science research and education, as well as science, technology, engineering, and mathematics (STEM) workforce development, with emphasis on the United States but with an appreciation that similar challenges and opportunities for the materials community exist internationally.
25 CFR 170.205 - What is an IRR High Priority Project (IRRHPP)?
Code of Federal Regulations, 2010 CFR
2010-04-01
... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Funding Irr High Priority Project (irrhpp) § 170... applications. (c) IRRHPP funds cannot be used for transportation planning, research, routine maintenance...
Vehicle Scheduling Schemes for Commercial and Emergency Logistics Integration
Li, Xiaohui; Tan, Qingmei
2013-01-01
In modern logistics operations, large-scale logistics companies, besides active participation in profit-seeking commercial business, also play an essential role during an emergency relief process by dispatching urgently-required materials to disaster-affected areas. Therefore, an issue has been widely addressed by logistics practitioners and caught researchers' more attention as to how the logistics companies achieve maximum commercial profit on condition that emergency tasks are effectively and performed satisfactorily. In this paper, two vehicle scheduling models are proposed to solve the problem. One is a prediction-related scheme, which predicts the amounts of disaster-relief materials and commercial business and then accepts the business that will generate maximum profits; the other is a priority-directed scheme, which, firstly groups commercial and emergency business according to priority grades and then schedules both types of business jointly and simultaneously by arriving at the maximum priority in total. Moreover, computer-based simulations are carried out to evaluate the performance of these two models by comparing them with two traditional disaster-relief tactics in China. The results testify the feasibility and effectiveness of the proposed models. PMID:24391724
Vehicle scheduling schemes for commercial and emergency logistics integration.
Li, Xiaohui; Tan, Qingmei
2013-01-01
In modern logistics operations, large-scale logistics companies, besides active participation in profit-seeking commercial business, also play an essential role during an emergency relief process by dispatching urgently-required materials to disaster-affected areas. Therefore, an issue has been widely addressed by logistics practitioners and caught researchers' more attention as to how the logistics companies achieve maximum commercial profit on condition that emergency tasks are effectively and performed satisfactorily. In this paper, two vehicle scheduling models are proposed to solve the problem. One is a prediction-related scheme, which predicts the amounts of disaster-relief materials and commercial business and then accepts the business that will generate maximum profits; the other is a priority-directed scheme, which, firstly groups commercial and emergency business according to priority grades and then schedules both types of business jointly and simultaneously by arriving at the maximum priority in total. Moreover, computer-based simulations are carried out to evaluate the performance of these two models by comparing them with two traditional disaster-relief tactics in China. The results testify the feasibility and effectiveness of the proposed models.
May-Collado, Laura J; Agnarsson, Ingi
2011-01-01
Habitat loss and overexploitation are among the primary factors threatening populations of many mammal species. Recently, aquatic mammals have been highlighted as particularly vulnerable. Here we test (1) if aquatic mammals emerge as more phylogenetically urgent conservation priorities than their terrestrial relatives, and (2) if high priority species are receiving sufficient conservation effort. We also compare results among some phylogenetic conservation methods. A phylogenetic analysis of conservation priorities for all 620 species of Cetartiodactyla and Carnivora, including most aquatic mammals. Conservation priority ranking of aquatic versus terrestrial species is approximately proportional to their diversity. However, nearly all obligated freshwater cetartiodactylans are among the top conservation priority species. Further, ∼74% and 40% of fully aquatic cetartiodactylans and carnivores, respectively, are either threatened or data deficient, more so than their terrestrial relatives. Strikingly, only 3% of all 'high priority' species are thought to be stable. An overwhelming 97% of these species thus either show decreasing population trends (87%) or are insufficiently known (10%). Furthermore, a disproportional number of highly evolutionarily distinct species are experiencing population decline, thus, such species should be closely monitored even if not currently threatened. Comparison among methods reveals that exact species ranking differs considerably among methods, nevertheless, most top priority species consistently rank high under any method. While we here favor one approach, we also suggest that a consensus approach may be useful when methods disagree. These results reinforce prior findings, suggesting there is an urgent need to gather basic conservation data for aquatic mammals, and special conservation focus is needed on those confined to freshwater. That evolutionarily distinct--and thus 'biodiverse'--species are faring relatively poorly is alarming and requires further study. Our results offer a detailed guide to phylogeny-based conservation prioritization for these two orders.
Chitosan based nanofibers in bone tissue engineering.
Balagangadharan, K; Dhivya, S; Selvamurugan, N
2017-11-01
Bone tissue engineering involves biomaterials, cells and regulatory factors to make biosynthetic bone grafts with efficient mineralization for regeneration of fractured or damaged bones. Out of all the techniques available for scaffold preparation, electrospinning is given priority as it can fabricate nanostructures. Also, electrospun nanofibers possess unique properties such as the high surface area to volume ratio, porosity, stability, permeability and morphological similarity to that of extra cellular matrix. Chitosan (CS) has a significant edge over other materials and as a graft material, CS can be used alone or in combination with other materials in the form of nanofibers to provide the structural and biochemical cues for acceleration of bone regeneration. Hence, this review was aimed to provide a detailed study available on CS and its composites prepared as nanofibers, and their associated properties found suitable for bone tissue engineering. Copyright © 2016 Elsevier B.V. All rights reserved.
IRIDE: Interdisciplinary research infrastructure based on dual electron linacs and lasers
NASA Astrophysics Data System (ADS)
Ferrario, M.; Alesini, D.; Alessandroni, M.; Anania, M. P.; Andreas, S.; Angelone, M.; Arcovito, A.; Arnesano, F.; Artioli, M.; Avaldi, L.; Babusci, D.; Bacci, A.; Balerna, A.; Bartalucci, S.; Bedogni, R.; Bellaveglia, M.; Bencivenga, F.; Benfatto, M.; Biedron, S.; Bocci, V.; Bolognesi, M.; Bolognesi, P.; Boni, R.; Bonifacio, R.; Boscherini, F.; Boscolo, M.; Bossi, F.; Broggi, F.; Buonomo, B.; Calo, V.; Catone, D.; Capogni, M.; Capone, M.; Cassou, K.; Castellano, M.; Castoldi, A.; Catani, L.; Cavoto, G.; Cherubini, N.; Chirico, G.; Cestelli-Guidi, M.; Chiadroni, E.; Chiarella, V.; Cianchi, A.; Cianci, M.; Cimino, R.; Ciocci, F.; Clozza, A.; Collini, M.; Colo, G.; Compagno, A.; Contini, G.; Coreno, M.; Cucini, R.; Curceanu, C.; Curciarello, F.; Dabagov, S.; Dainese, E.; Davoli, I.; Dattoli, G.; De Caro, L.; De Felice, P.; De Leo, V.; Dell Agnello, S.; Della Longa, S.; Delle Monache, G.; De Spirito, M.; Di Cicco, A.; Di Donato, C.; Di Gioacchino, D.; Di Giovenale, D.; Di Palma, E.; Di Pirro, G.; Dodaro, A.; Doria, A.; Dosselli, U.; Drago, A.; Dupraz, K.; Escribano, R.; Esposito, A.; Faccini, R.; Ferrari, A.; Filabozzi, A.; Filippetto, D.; Fiori, F.; Frasciello, O.; Fulgentini, L.; Gallerano, G. P.; Gallo, A.; Gambaccini, M.; Gatti, C.; Gatti, G.; Gauzzi, P.; Ghigo, A.; Ghiringhelli, G.; Giannessi, L.; Giardina, G.; Giannini, C.; Giorgianni, F.; Giovenale, E.; Giulietti, D.; Gizzi, L.; Guaraldo, C.; Guazzoni, C.; Gunnella, R.; Hatada, K.; Iannone, M.; Ivashyn, S.; Jegerlehner, F.; Keeffe, P. O.; Kluge, W.; Kupsc, A.; Labate, L.; Levi Sandri, P.; Lombardi, V.; Londrillo, P.; Loreti, S.; Lorusso, A.; Losacco, M.; Lukin, A.; Lupi, S.; Macchi, A.; Magazù, S.; Mandaglio, G.; Marcelli, A.; Margutti, G.; Mariani, C.; Mariani, P.; Marzo, G.; Masciovecchio, C.; Masjuan, P.; Mattioli, M.; Mazzitelli, G.; Merenkov, N. P.; Michelato, P.; Migliardo, F.; Migliorati, M.; Milardi, C.; Milotti, E.; Milton, S.; Minicozzi, V.; Mobilio, S.; Morante, S.; Moricciani, D.; Mostacci, A.; Muccifora, V.; Murtas, F.; Musumeci, P.; Nguyen, F.; Orecchini, A.; Organtini, G.; Ottaviani, P. L.; Pace, C.; Pace, E.; Paci, M.; Pagani, C.; Pagnutti, S.; Palmieri, V.; Palumbo, L.; Panaccione, G. C.; Papadopoulos, C. F.; Papi, M.; Passera, M.; Pasquini, L.; Pedio, M.; Perrone, A.; Petralia, A.; Petrarca, M.; Petrillo, C.; Petrillo, V.; Pierini, P.; Pietropaolo, A.; Pillon, M.; Polosa, A. D.; Pompili, R.; Portoles, J.; Prosperi, T.; Quaresima, C.; Quintieri, L.; Rau, J. V.; Reconditi, M.; Ricci, A.; Ricci, R.; Ricciardi, G.; Ricco, G.; Ripani, M.; Ripiccini, E.; Romeo, S.; Ronsivalle, C.; Rosato, N.; Rosenzweig, J. B.; Rossi, A. A.; Rossi, A. R.; Rossi, F.; Rossi, G.; Russo, D.; Sabatucci, A.; Sabia, E.; Sacchetti, F.; Salducco, S.; Sannibale, F.; Sarri, G.; Scopigno, T.; Sekutowicz, J.; Serafini, L.; Sertore, D.; Shekhovtsova, O.; Spassovsky, I.; Spadaro, T.; Spataro, B.; Spinozzi, F.; Stecchi, A.; Stellato, F.; Surrenti, V.; Tenore, A.; Torre, A.; Trentadue, L.; Turchini, S.; Vaccarezza, C.; Vacchi, A.; Valente, P.; Venanzoni, G.; Vescovi, S.; Villa, F.; Zanotti, G.; Zema, N.; Zobov, M.; Zomer, F.
2014-03-01
This paper describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity "particles factory", based on a combination of high duty cycle radio-frequency superconducting electron linacs and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE is also supposed to be realized in subsequent stages of development depending on the assigned priorities.
Carlucci, J G; Jin, L; Sanders, J E; Mohapi, E Q; Mandalakas, A M
2015-03-21
A well-established pediatric human immunodeficiency virus (HIV) clinic in Lesotho with initial infection control (IC) measures prioritizing blood-borne disease. In line with international recommendations, services have been expanded to include the management of patients with tuberculosis (TB). The creation of comprehensive IC guidelines with an emphasis on TB has become a priority. To provide a model for developing and implementing IC guidelines in ambulatory care facilities in limited-resource settings with high HIV and TB prevalence. Activities: An IC plan that includes guidance covering both general IC measures and TB-specific guidelines was created by integrating local and international recommendations and emphasizing the importance of administrative measures, environmental controls, and disease-specific precautions. An interdisciplinary committee was established to oversee its implementation, monitoring, and evaluation. Development and implementation of IC guidelines in resource-limited settings are feasible and should be a priority in high HIV and TB prevalence areas. Education should be the cornerstone of such endeavors. Many interventions can be implemented with minimal expertise and material resources. Administrative support and institutional investment are essential to the sustainability of an effective IC program.
Microbial Impact on Success of Human Exploration Missions
NASA Technical Reports Server (NTRS)
Pierson, Duane L.; Ott, C. Mark; Groves, T. O.; Paloski, W. H. (Technical Monitor)
2000-01-01
The purpose of this study is to identify microbiological risks associated with space exploration and identify potential countermeasures available. Identification of microbial risks associated with space habitation requires knowledge of the sources and expected types of microbial agents. Crew data along with environmental data from water, surfaces, air, and free condensate are utilized in risk examination. Data from terrestrial models are also used. Microbial risks to crew health include bacteria, fungi, protozoa, and viruses. Adverse effects of microbes include: infections, allergic reactions, toxin production, release of volatiles, food spoilage, plant disease, material degradation, and environmental contamination. Risk is difficult to assess because of unknown potential changes in microbes (e.g., mutation) and the human host (e.g., immune changes). Prevention of adverse microbial impacts is preferred over remediation. Preventative measures include engineering measures (e.g., air filtration), crew microbial screening, acceptability standards, and active verification by onboard monitoring. Microbiological agents are important risks to human health and performance during space flight and risks increase with mission duration. Acceptable risk level must be defined. Prevention must be given high priority. Careful screening of crewmembers and payloads is an important element of any risk mitigation plan. Improved quantitation of microbiological risks is a high priority.
36 CFR 230.4 - State program administration.
Code of Federal Regulations, 2010 CFR
2010-07-01
... and set priorities for achieving the goals and objectives identified for the State for each year. (2... planting, maintenance, and improvement, and other high priority practices within the State that will result... appropriate Service Representative; (9) Guidelines for establishing annual priorities for the approval of...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Hall, David R; Bartholomew, David B; Moon, Justin
2009-09-08
An apparatus for fixing computational latency within a deterministic region on a network comprises a network interface modem, a high priority module and at least one deterministic peripheral device. The network interface modem is in communication with the network. The high priority module is in communication with the network interface modem. The at least one deterministic peripheral device is connected to the high priority module. The high priority module comprises a packet assembler/disassembler, and hardware for performing at least one operation. Also disclosed is an apparatus for executing at least one instruction on a downhole device within a deterministic region,more » the apparatus comprising a control device, a downhole network, and a downhole device. The control device is near the surface of a downhole tool string. The downhole network is integrated into the tool string. The downhole device is in communication with the downhole network.« less
2014-08-14
The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Assistive Technology Alternative Financing Program administered by the Rehabilitation Services Administration (RSA). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. This priority is designed to ensure that the Department funds high-quality assistive technology (AT) alternative financing programs (AFPs) that meet rigorous standards in order to enable individuals with disabilities to access and acquire assistive technology devices and services necessary to achieve education, community living, and employment goals.
Li, Chunsheng; Ansari, Armin; Etherington, George; Jourdain, Jean-Rene; Kukhta, Boris; Kurihara, Osamu; Lopez, Maria Antonia; Ménétrier, Florence; dos Reis, Arlene Alves; Solomon, Stephen; Zhang, Jiangfeng; Carr, Zhanat
2017-01-01
Following a radiological or nuclear emergency, first responders and the public may become internally contaminated with radioactive materials, as demonstrated during the Goiânia, Chernobyl and Fukushima accidents. Timely monitoring of the affected populations for potential internal contamination, assessment of radiation dose and the provision of necessary medical treatment are required to minimize the health risks from the contamination. This paper summarizes the guidelines and tools that have been developed, and identifies the gaps and priorities for future projects. PMID:27521210
Mather, Mara; Clewett, David; Sakaki, Michiko; Harley, Carolyn W
2016-01-01
Emotional arousal enhances perception and memory of high-priority information but impairs processing of other information. Here, we propose that, under arousal, local glutamate levels signal the current strength of a representation and interact with norepinephrine (NE) to enhance high priority representations and out-compete or suppress lower priority representations. In our "glutamate amplifies noradrenergic effects" (GANE) model, high glutamate at the site of prioritized representations increases local NE release from the locus coeruleus (LC) to generate "NE hotspots." At these NE hotspots, local glutamate and NE release are mutually enhancing and amplify activation of prioritized representations. In contrast, arousal-induced LC activity inhibits less active representations via two mechanisms: 1) Where there are hotspots, lateral inhibition is amplified; 2) Where no hotspots emerge, NE levels are only high enough to activate low-threshold inhibitory adrenoreceptors. Thus, LC activation promotes a few hotspots of excitation in the context of widespread suppression, enhancing high priority representations while suppressing the rest. Hotspots also help synchronize oscillations across neural ensembles transmitting high-priority information. Furthermore, brain structures that detect stimulus priority interact with phasic NE release to preferentially route such information through large-scale functional brain networks. A surge of NE before, during, or after encoding enhances synaptic plasticity at NE hotspots, triggering local protein synthesis processes that enhance selective memory consolidation. Together, these noradrenergic mechanisms promote selective attention and memory under arousal. GANE not only reconciles apparently contradictory findings in the emotion-cognition literature but also extends previous influential theories of LC neuromodulation by proposing specific mechanisms for how LC-NE activity increases neural gain.
Scanlan, Justin Newton; Meredith, Pamela J; Haracz, Kirsti; Ennals, Priscilla; Pépin, Geneviève; Webster, Jayne S; Arblaster, Karen; Wright, Shelley
2017-12-01
Occupational therapy programs must prepare graduates for work in mental health. However, this area of practice is complex and rapidly changing. This study explored the alignment between educational priorities identified by occupational therapists practising in mental health and level of coverage of these topics in occupational therapy programs in Australia and New Zealand. Surveys were distributed to heads of all occupational therapy programs across Australia and New Zealand. The survey included educational priorities identified by occupational therapists in mental health from a previous study. Respondents were requested to identify the level of coverage given to each of these priorities within their curriculum. These data were analysed to determine a ranking of educational topics in terms of level of coverage in university programs. Responses were received for 19 programs from 16 universities. Thirty-four topics were given 'High-level coverage' in university programs, and these were compared against the 29 topics classified as 'Essential priorities' by clinicians. Twenty topics were included in both the 'Essential priorities' and 'High-level coverage' categories. Topics considered to be 'Essential priorities' by clinicians which were not given 'High-level coverage' in university programs included the following: mental health fieldwork experiences; risk assessment and management; professional self-care resilience and sensory approaches. While there appears to be overall good alignment between mental health curricula and priorities identified by practising occupational therapists, there are some discrepancies. These discrepancies are described and establish a strong foundation for further discussion between clinicians, academics and university administration to support curriculum review and revision. © 2017 Occupational Therapy Australia.
Plint, Amy C; Stang, Antonia S; Calder, Lisa A
2015-01-01
Patient safety in the context of emergency medicine is a relatively new field of study. To date, no broad research agenda for patient safety in emergency medicine has been established. The objective of this study was to establish patient safety-related research priorities for emergency medicine. These priorities would provide a foundation for high-quality research, important direction to both researchers and health-care funders, and an essential step in improving health-care safety and patient outcomes in the high-risk emergency department (ED) setting. A four-phase consensus procedure with a multidisciplinary expert panel was organized to identify, assess, and agree on research priorities for patient safety in emergency medicine. The 19-member panel consisted of clinicians, administrators, and researchers from adult and pediatric emergency medicine, patient safety, pharmacy, and mental health; as well as representatives from patient safety organizations. In phase 1, we developed an initial list of potential research priorities by electronically surveying a purposeful and convenience sample of patient safety experts, ED clinicians, administrators, and researchers from across North America using contact lists from multiple organizations. We used simple content analysis to remove duplication and categorize the research priorities identified by survey respondents. Our expert panel reached consensus on a final list of research priorities through an in-person meeting (phase 3) and two rounds of a modified Delphi process (phases 2 and 4). After phases 1 and 2, 66 unique research priorities were identified for expert panel review. At the end of phase 4, consensus was reached for 15 research priorities. These priorities represent four themes: (1) methods to identify patient safety issues (five priorities), (2) understanding human and environmental factors related to patient safety (four priorities), (3) the patient perspective (one priority), and (4) interventions for improving patient safety (five priorities). This study established expert, consensus-based research priorities for patient safety in emergency medicine. This framework could be used by researchers and health-care funders and represents an essential guiding step towards enhancing quality of care and patient safety in the ED.
Synthetic building materials for transport buildings and structures
NASA Astrophysics Data System (ADS)
Gerasimova, Vera
2017-10-01
The most effective building materials account for the highest growth not only in construction of residential and public buildings, but also other capital projects including roadways, bridges, drainage, communications and other engineering projects. Advancement in the technology of more efficient and ecologically responsible insulation materials have been a priority for safety, minimal maintenance and longevity of finished construction projects. The practical use of modern building materials such as insulation, sound reduction and low energy consumption are a benefit in cost and application compared to the use of outdated heavier and labor-intensive materials. The most efficient way for maximizing insolation and sound proofing should be done during the design stages of the project according to existing codes and regulations that are required by Western Government. All methods and materials that are used need to be optimized in order to reach a high durability and low operational and maintenance cost exceeding more than 50 years of the life of the building, whether it is for public, industrial or residential use. Western construction techniques and technologies need to be applied and adapted by the Russian Federation to insure the most productive successful methods are being implemented. The issues of efficient insulation materials are outlined in this article.
Use of a Novel ORMOCER as a Universal Direct Restorative Material.
Hakim, Foroud; Vallée, Jessie
2018-01-01
Composite resin is considered the material of choice for direct restoration of teeth when esthetic outcome is a high priority. While material science improvements have mitigated many of the traditional liabilities related to composite resin restorations, shrinkage and related shrinkage stress still play a role in outcomes, placement techniques, and overall success. This case report demonstrates two restorative scenarios using an ORMOCER® composite material. The first features a female patient who, upon completion of preliminary orthodontic treatment, determined in consultation with the orthodontist that her central incisors would present more idealistic display and esthetics if they were lengthened by approximately 1.5 mm. The lengthening of the incisors was to precede the phase II refinement with clear aligners, which would aim to extrude the remaining anterior teeth to develop incisal balance and symmetry. The second case is that of a woman who presented with a newly symptomatic upper right second bicuspid with an existing nearly decade old, large MODL composite resin restoration. This article demonstrates the universal nature of the novel direct restorative material used, making it well-suited for both anterior and posterior applications.
Grepperud, Sverre; Holman, Per Arne; Wangen, Knut Reidar
2014-12-14
Clinicians at Norwegian community mental health centres assess referrals from general practitioners and classify them into three priority groups (high priority, low priority, and refusal) according to need where need is defined by three prioritization criteria (severity, effect, and cost-effectiveness). In this study, we seek to operationalize the three criteria and analyze to what extent they have an effect on clinical-level priority setting after controlling for clinician characteristics and organisational factors. Twenty anonymous referrals were rated by 42 admission team members employed at 14 community mental health centres in the South-East Health Region of Norway. Intra-class correlation coefficients were calculated and logistic regressions were performed. Variation in clinicians' assessments of the three criteria was highest for effect and cost-effectiveness. An ordered logistic regression model showed that all three criteria for prioritization, three clinician characteristics (education, being a manager or not, and "guideline awareness"), and the centres themselves (fixed effects), explained priority decisions. The relative importance of the explanatory factors, however, depended on the priority decision studied. For the classification of all admitted patients into high- and low-priority groups, all clinician characteristics became insignificant. For the classification of patients, into those admitted and non-admitted, one criterion (effect) and "being a manager or not" became insignificant, while profession ("being a psychiatrist") became significant. Our findings suggest that variation in priority decisions can be reduced by: (i) reducing the disagreement in clinicians' assessments of cost-effectiveness and effect, and (ii) restricting priority decisions to clinicians with a similar background (education, being a manager or not, and "guideline awareness").
Advanced In-Space Propulsion: "Exploring the Solar System"
NASA Technical Reports Server (NTRS)
Johnson, Les
2003-01-01
This viewgraph presentation reviews a number of advanced propulsion technologies for interplanetary spacecraft. The objective of the In Space Propulsion Technology Projects Office is to develop in-space propulsion technologies that can enable and/or benefit near and mid-term NASA science missions by significantly reducing cost, mass, and/or travel times. The technologies profiled are divided into several categories: High Priority (aerocapture, next generation ion propulsion, solar sails); Medium Priority (advanced chemical propulsion, solar electric propulsion, Hall thrusters); Low Priority (solar thermal propulsion); and High Payoff/High Risk (1 g/sq m solar sails, momentum exchange tethers, and plasma sails).
Strategic workload management and decision biases in aviation
NASA Technical Reports Server (NTRS)
Raby, Mireille; Wickens, Christopher D.
1994-01-01
Thirty pilots flew three simulated landing approaches under conditions of low, medium, and high workload. Workload conditions were created by varying time pressure and external communications requirements. Our interest was in how the pilots strategically managed or adapted to the increasing workload. We independently assessed the pilot's ranking of the priority of different discrete tasks during the approach and landing. Pilots were found to sacrifice some aspects of primary flight control as workload increased. For discrete tasks, increasing workload increased the amount of time in performing the high priority tasks, decreased the time in performing those of lowest priority, and did not affect duration of performance episodes or optimality of scheduling of tasks of any priority level. Individual differences analysis revealed that high-performing subjects scheduled discrete tasks earlier in the flight and shifted more often between different activities.
Priority Techniques for High Occupancy Vehicles : State-of-the-Art Overview
DOT National Transportation Integrated Search
1975-11-01
The report, part of a series of publications based on research and development efforts is a concise state-of-the-art overview of priority techniques for high occupancy vehicles (buses, carpools, and vanpools). The report identifies and summarizes sel...
36 CFR 230.37 - State priority plan-educational assistance.
Code of Federal Regulations, 2011 CFR
2011-07-01
...) Activities; (2) Events; (3) Programs; (4) Curriculum; (5) Written materials; (6) Workshops; (7) Training sessions; (8) Web site construction and maintenance; or (9) Similar activities designed to bring landowners...
36 CFR 230.37 - State priority plan-educational assistance.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) Activities; (2) Events; (3) Programs; (4) Curriculum; (5) Written materials; (6) Workshops; (7) Training sessions; (8) Web site construction and maintenance; or (9) Similar activities designed to bring landowners...
NASA Astrophysics Data System (ADS)
Souza Silva, Marconi; Martins, Rogério Parentoni; Ferreira, Rodrigo Lopes
2015-02-01
Cave environments are characterized by possessing specialized fauna living in high environmental stability with limited food conditions. These fauna are highly vulnerable to impacts, because this condition can frequently be easily altered. Moreover, environmental determinants of the biodiversity patterns of caves remain poorly understood and protected. Therefore, the main goal of this work is to propose a cave conservation priority index (CCPi) for a rapid assessment for troglobiotic and troglophile protection. Furthermore, the troglobiotic diversity, distribution and threats have been mapped in the Brazilian Atlantic forest. To propose the CCPi, the human impacts and richness of troglobiotic and troglophile species of 100 caves were associated. Data related to troglomorphic/troglobiotic fauna from another 200 caves were used to map the troglobiotic diversity and distribution. The CCPi reveals extremely high conservation priority for 15 % of the caves, high for 36 % and average for 46 % of the caves. Fourteen caves with extremely high priorities should have urgent conservation and management actions. The geographical distribution of the 221 known troglobiotic/troglomorphic species allowed us to select 19 karst areas that need conservation actions. Seven areas were considered to have urgent priority for conservation actions. The two richest areas correspond to the "iron quadrangle" with iron ore caves (67 spp.) and the "Açungui limestone group" (56 spp.). Both areas have several caves and are important aquifers. The use of the CCPi can prevent future losses because it helps assessors to select caves with priorities for conservation which should receive emergency attention in relation to protection, management and conservation actions.
Technology development status at McDonnell Douglas
NASA Technical Reports Server (NTRS)
Rowe, W. T.
1981-01-01
The significant technology items of the Concorde and the conceptual MCD baseline advanced supersonic transport are compared. The four major improvements are in the areas of range performance, structures (materials), aerodynamics, and in community noise. Presentation charts show aerodynamic efficiency; the reoptimized wing; low scale lift/drag ratio; control systems; structural modeling and analysis; weight and cost comparisons for superplasticity diffusion bonded titanium sandwich structures and for aluminum brazed titanium honeycomb structures; operating cost reduction; suppressor nozzles; noise reduction and range; the bicone inlet; a market summary; environmental issues; high priority items; the titanium wing and fuselage test components; and technology validation.
Accident tolerant fuel cladding development: Promise, status, and challenges
NASA Astrophysics Data System (ADS)
Terrani, Kurt A.
2018-04-01
The motivation for transitioning away from zirconium-based fuel cladding in light water reactors to significantly more oxidation-resistant materials, thereby enhancing safety margins during severe accidents, is laid out. A review of the development status for three accident tolerant fuel cladding technologies, namely coated zirconium-based cladding, ferritic alumina-forming alloy cladding, and silicon carbide fiber-reinforced silicon carbide matrix composite cladding, is offered. Technical challenges and data gaps for each of these cladding technologies are highlighted. Full development towards commercial deployment of these technologies is identified as a high priority for the nuclear industry.
A rainfall risk analysis thanks to an GIS based estimation of urban vulnerability
NASA Astrophysics Data System (ADS)
Renard, Florent; Pierre-Marie, Chapon
2010-05-01
The urban community of Lyon, situated in France in the north of the Rhône valley, comprises 1.2 million inhabitants within 515 km ². With such a concentration of issues, policy makers and local elected officials therefore attach great importance to the management of hydrological risks, particularly due to the inherent characteristics of the territory. If the hazards associated with these risks in the territory of Lyon have been the subject of numerous analyses, studies on the vulnerability of greater Lyon are rare and have common shortcomings that impair their validity. We recall that the risk is seen as the classic relationship between the probability of occurrence of hazards and vulnerability. In this article, this vulnerability will be composed of two parts. The first one is the sensitivity of the stakes facing hydrological hazards as urban runoff, that is to say, their propensity to suffer damage during a flood (Gleize and Reghezza, 2007). The second factor is their relative importance in the functioning of the community. Indeed, not all the stakes could provide the same role and contribution to the Greater Lyon. For example, damage to the urban furniture such as bus shelter seems less harmful to the activities of the urban area than that of transport infrastructure (Renard and Chapon, 2010). This communication proposes to assess the vulnerability of Lyon urban area facing to hydrological hazards. This territory is composed of human, environmental and material stakes. The first part of this work is to identify all these issues so as to completeness. Then, is it required to build a "vulnerability index" (Tixier et al, 2006). Thus, it is necessary to use methods of multicriteria decision aid to evaluate the two components of vulnerability: the sensitivity and the contribution to the functioning of the community. Finally, the results of the overall vulnerability are presented, and then coupled to various hazards related to water such as runoff associated with heavy rains, to locate areas of risk in the urban area. The targets that share the same rank of this vulnerability index do not possess the same importance, or the same sensitivity to the flood hazard. Therefore, the second part of this work is to define the priorities and sensitivities of different targets based on the judgments of experts. Multicriteria decision methods are used to prioritize elements and are therefore adapted to the modelling of the sensitivity of the issues of greater Lyon (Griot, 2008). The purpose of these methods is the assessment of priorities between the different components of the situation. Thomas Saaty's analytic hierarchy process (1980) is the most frequently used because of its many advantages. On this basis, the formal calculations of priorities and sensitivities of the elements have been conducted. These calculations are based on the judgments of experts. Indeed, during semi-structured interview, the 38 experts in our sample delivered a verdict on issues that seem relatively more important than others by binary comparison. They carry the same manner to determine sensitivity's stakes to hazard flooding. Finally, the consistency of answers given by experts is validated by calculating a ratio of coherence, and their results are aggregated to provide functions of priority (based on the relative importance of each stakes), and functions of sensitivity (based on the relative sensitivity of each stakes). From these functions of priority and sensitivity is obtained the general function of vulnerability. The vulnerability functions allow defining the importance of the stakes of Greater Lyon and their sensitivity to hydrological hazards. The global vulnerability function is obtained from sensitivity and priority functions and shows the great importance of human issues (75 %). The vulnerability factor of environmental targets represents 12 % of the global vulnerability function, as much as the materials issues. However, it can be seen that the environmental and material stakes do not represent the same weight into the priority and sensitivity functions. Indeed, the environmental issues seem more important than the material ones (17 % for the environmental stakes whereas only 5 % for the material stakes in the priority function), but less sensitive to an hydrological hazard (6 % for the environmental issues while 20 % for the material issues in the sensitivity function). Similarly, priority functions and sensitivity are established for all stakes at all levels. The stakes are then converted into a mesh form (100 meters wide). This will standardize the collection framework and the heterogeneous nature of data to allow their comparison. Finally, it is obtained a detailed, consistent and objective vulnerability of the territory of Greater Lyon. At the end, to get a direct reading of risk, combination of hazard and vulnerability, it is overlaid the two maps.
NASA/SDIO Space Environmental Effects on Materials Workshop, part 1
NASA Technical Reports Server (NTRS)
Teichman, Louis A. (Compiler); Stein, Bland A. (Compiler)
1989-01-01
The present state of knowledge regarding space environmental effects on materials is described and the knowledge gaps that prevent informed decisions on the best use of advanced materials in space for long-duration NASA and Strategic Defense Initiative Organization (SDIO) missions are identified. Establishing priorities for future ground-based and space-based materials research was a major goal. The end product was an assessment of the current state-of-the-art in space environmental effects on materials in order to develop a national plan for spaceflight experiments.
Interactions between visual working memory representations.
Bae, Gi-Yeul; Luck, Steven J
2017-11-01
We investigated whether the representations of different objects are maintained independently in working memory or interact with each other. Observers were shown two sequentially presented orientations and required to reproduce each orientation after a delay. The sequential presentation minimized perceptual interactions so that we could isolate interactions between memory representations per se. We found that similar orientations were repelled from each other whereas dissimilar orientations were attracted to each other. In addition, when one of the items was given greater attentional priority by means of a cue, the representation of the high-priority item was not influenced very much by the orientation of the low-priority item, but the representation of the low-priority item was strongly influenced by the orientation of the high-priority item. This indicates that attention modulates the interactions between working memory representations. In addition, errors in the reported orientations of the two objects were positively correlated under some conditions, suggesting that representations of distinct objects may become grouped together in memory. Together, these results demonstrate that working-memory representations are not independent but instead interact with each other in a manner that depends on attentional priority.
The Role of the Urban Main Library in Nine Public Library Systems.
ERIC Educational Resources Information Center
Bell, Elsie L.
To help clarify the role of urban main libraries, visits were made to nine library systems serving populations of 500,000 to 750,000 for the purpose of exploring: (1) system priorities; (2) budgetary support for materials; (3) public service staff; and (4) materials selection procedures. Particular emphasis was placed upon the financial and…
Priority One: Environment. Air Pollution and Your Health, Teacher's Guide.
ERIC Educational Resources Information Center
McCutcheon, Patricia; And Others
This teaching guide is designed to be used with secondary school students and the unit Air Pollution and Your Health. Material for the teacher includes the following: (1) an introduction to the unit; (2) a discussion of the sections of the unit; (3) instructional objectives; (4) suggestions for use of filmstrips, worksheets, reference materials,…
Review of high field superconducting magnet development at Oxford Instruments
NASA Astrophysics Data System (ADS)
Brown, F. J.; Kerley, N. W.; Knox, R. B.; Timms, K. W.
1996-02-01
Present commercial development activity for high field superconducting magnets is focused clearly in three directions. The development of solenoid magnets with flux densities in excess of 20 T, the production of highly homogeneous fields at 20 T, and development of large split pair magnets in excess of 12 T. Recent developments in split pair technology allows us to build magnets with useful access, transverse to the field, up to 15 T. Compact solenoid magnets to 20 T have been available commercially for over 3 yr now with a progressive increment in bore size, providing associated engineering challenges. A 20 T solenoid with a clear bore of 52 mm and a homogeneity of 0.1% is now a standard production item. Improving the homogeneity to the 1 ppm level involves re-assessment of critical design parameters and choice of materials. Our development over the last twelve months has culminated in a 20 T solenoid with base homogeneity of 5 ppm over a 10 mm sphere. In order to realise persistent fields in excess of 20 T, requires the priority on development to be switched from engineering and manufacturing towards material development and enhancement. We present the findings and conclusions of our high field development program over the last 3 yr, together with an outline of our requirements and activities in materials and engineering leading to the next step in high field magnet manufacture, using conventional low Tc conductors.
34 CFR 669.22 - What priorities may the Secretary establish?
Code of Federal Regulations, 2010 CFR
2010-07-01
.... (2) Specific foreign languages for study or materials development. (3) Levels of education, for... POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION LANGUAGE RESOURCE CENTERS PROGRAM How Does the Secretary Make a...
PREFACE: International Conference on Advanced Structural and Functional Materials Design 2008
NASA Astrophysics Data System (ADS)
Kakeshita, Tomoyuki
2009-07-01
The Ministry of Education, Culture, Sports, Science and Technology of Japan started the Priority Assistance for the Formation of Worldwide Renowned Centers of Research - Global COE Program. This program is based on the competitive principle where a third party evaluation decides which program to support and to give priority support to the formation of world-class centers of research. Our program Center of Excellence for Advanced Structural and Functional Materials Design was selected as one of 13 programs in the field of Chemistry and Materials Science. This center is composed of two materials-related Departments in the Graduate School of Engineering: Materials and Manufacturing Science and Adaptive Machine Systems, and 4 Research Institutes: Center for Atomic and Molecular Technologies, Welding and Joining Research Institute, Institute of Scientific and Industrial Research and Research Center for Ultra-High Voltage Electron Microscopy. Recently, materials research, particularly that of metallic materials, has specialized only in individual elemental characteristics and narrow specialty fields, and there is a feeling that the original role of materials research has been forgotten. The 6 educational and research organizations which make up the COE program cooperatively try to develop new advanced structural and functional materials and achieve technological breakthrough for their fabrication processes from electronic, atomic, microstructural and morphological standpoints, focusing on their design and application: development of high performance structural materials such as space plane and turbine blades operating under a severe environment, new fabrication and assembling methods for electronic devices, development of evaluation technique for materials reliability, and development of new biomaterials for regeneration of biological hard tissues. The aim of this international conference was to report the scientific progress in our Global COE program and also to discuss related research topics. The organizing committee gratefully thanks participants for presenting their recent results and for discussions with our COE members and international attendees. November 2008 Professor Tomoyuki Kakeshita Chairman of the Conference Vice Dean, Graduate School of Engineering, Osaka University, Division of Materials and Manufacturing Science, Graduate School of Engineering Leader of Global COE Program, Osaka University, ''Center of Excellence for Advanced Structural and Functional Materials Design'' Organization Chairman: T Kakeshita (Osaka University) Advisory Board:H Mehrer (University Münster, Germany), E K H Salje (University of Cambridge, United Kingdom), H-E Schaefer (University of Stuttgart, Germany), P Veyssiere (CNRS-ONERA, France) Organizing Committee: T Kakeshita, H Araki, H Fujii, S Fujimoto, Y Fujiwara, A Hirose, S Kirihara, M Mochizuki, H Mori, T Nagase, H Nakajima, T Nakano, R Nakatani, K Nogi, Y Setsuhara, Y Shiratsuchi, T Tanaka, T Terai, H Tsuchiya, N Tsuji, H Utsunomiya, H Yasuda, H Yasuda (Osaka University) Executive Committee: T Kakeshita, S Fujimoto, Y Fujiwara, A Hirose, T Tanaka, H Yasuda (Osaka University) Conference Secretariat: Y Fujiwara (Osaka University) Proceedings Editors: T Kakeshita and Y Fujiwara (Osaka University) Conference photograph
NASA Astrophysics Data System (ADS)
Puig, Albert; LHCb Starterkit Team
2017-10-01
The vast majority of high-energy physicists use and produce software every day. Software skills are usually acquired “on the go” and dedicated training courses are rare. The LHCb Starterkit is a new training format for getting LHCb collaborators started in effectively using software to perform their research. The course focuses on teaching basic skills for research computing. Unlike traditional tutorials we focus on starting with basics, performing all the material live, with a high degree of interactivity, giving priority to understanding the tools as opposed to handing out recipes that work “as if by magic”. The LHCb Starterkit was started by two young members of the collaboration inspired by the principles of Software Carpentry, and the material is created in a collaborative fashion using the tools we teach. Three successful entry-level workshops, as well as an advance one, have taken place since the start of the initiative in 2015, and were taught largely by PhD students to other PhD students.
New NIST sediment SRM for inorganic analysis.
Zeisler, Rolf
2004-03-01
NIST maintains a portfolio of more than 1300 standard reference materials (SRM), more than a third of these relating to measurements in the biological and environmental fields. As part of the continuous renewal and replacement efforts, a set of new marine sediments has been recently developed covering organic and inorganic determinations. This paper describes the steps taken in sample preparation, homogeneity assay, and analytical characterization and certification with specific emphasis on SRM 2702 inorganics in marine sediment. Neutron activation analysis showed the SRM to be highly homogeneous, opening the possibility for use with solid sampling techniques. The certificate provides certified mass fraction values for 25 elements, reference values for eight elements, and information values for 11 elements, covering most of the priority pollutants with small uncertainties of only several percent relative. The values were obtained by combining results from different laboratories and techniques using a Bayesian statistical model. An intercomparison carried out in field laboratories with the material before certification illustrates a high commutability of this SRM.
NASA Astrophysics Data System (ADS)
Chawla, Viveak Kumar; Chanda, Arindam Kumar; Angra, Surjit
2018-03-01
The flexible manufacturing system (FMS) constitute of several programmable production work centers, material handling systems (MHSs), assembly stations and automatic storage and retrieval systems. In FMS, the automatic guided vehicles (AGVs) play a vital role in material handling operations and enhance the performance of the FMS in its overall operations. To achieve low makespan and high throughput yield in the FMS operations, it is highly imperative to integrate the production work centers schedules with the AGVs schedules. The Production schedule for work centers is generated by application of the Giffler and Thompson algorithm under four kind of priority hybrid dispatching rules. Then the clonal selection algorithm (CSA) is applied for the simultaneous scheduling to reduce backtracking as well as distance travel of AGVs within the FMS facility. The proposed procedure is computationally tested on the benchmark FMS configuration from the literature and findings from the investigations clearly indicates that the CSA yields best results in comparison of other applied methods from the literature.
1981-07-01
Disposal Methods 4-31 Evaluation of Past and Present Waste 4-35 Disposal Facilities Landfills 4-35 Dry Wells 4-37 Rating of Waste Disposal Sites 4-37 V 2...Problems Identified at GAPE Landfills 4-36 4.12 Priority Ranking of Potential 4-38 Contamination Sources 4.13 -4.31 Rating Forms for Waste Disposal Sites 4...39 -4-76 5.1 Priority Ranking of Potential Con- 5-2 tamination Sources B.1 Rating Factor System B-2 -B-5 4W EXECUTIVE SUMMARY The Resource
Workshop on the Thermophysical Properties of Molten Materials
NASA Technical Reports Server (NTRS)
1993-01-01
The role of accurate thermophysical property data in the process design and modeling of solidification processes was the subject of a workshop held on 22-23 Oct. 1992 in Cleveland, Ohio. The workshop was divided into three sequential sessions dealing with (1) industrial needs and priorities for thermophysical data, (2) experimental capabilities for measuring the necessary data, and (3) theoretical capabilities for predicting the necessary data. In addition, a 2-hour panel discussion of the salient issues was featured as well as a 2-hour caucus that assessed priorities and identified action plans.
Market segmentation using perceived constraints
Jinhee Jun; Gerard Kyle; Andrew Mowen
2008-01-01
We examined the practical utility of segmenting potential visitors to Cleveland Metroparks using their constraint profiles. Our analysis identified three segments based on their scores on the dimensions of constraints: Other priorities--visitors who scored the highest on 'other priorities' dimension; Highly Constrained--visitors who scored relatively high on...
2014-07-28
The Assistant Secretary for Special Education and Rehabilitative Services announces a priority for the Research Fellowships Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, this notice announces a priority for a Distinguished Residential Disability and Rehabilitation Policy Fellowship. We take this action to focus attention on an area of national need. We intend the priority to build research capacity by providing support to highly qualified, experienced researchers, including those who are individuals with disabilities, to conduct policy research in the areas of disability and rehabilitation.
The Big Rocks: Priority Management for Principals
ERIC Educational Resources Information Center
Marshall, Kim
2008-01-01
How can a dedicated principal work really, really hard but fail to get significant gains in student achievement? The answer is obvious: by spending too much time on the wrong things and not enough on the right things. The principal's number-one priority is zeroing in on the highest-priority activities for bringing all students to high levels of…
Malik, Mohammad Imran; Bhat, M Sultan
2014-12-01
The Himalayan watersheds are susceptible to various forms of degradation due to their sensitive and fragile ecological disposition coupled with increasing anthropogenic disturbances. Owing to the paucity of appropriate technology and financial resources, the prioritization of watersheds has become an inevitable process for effective planning and management of natural resources. Lidder catchment constitutes a segment of the western Himalayas with an area of 1,159.38 km(2). The study is based on integrated analysis of remote sensing, geographic information system, field study, and socioeconomic data. Multicriteria evaluation of geophysical, land-use and land-cover (LULC) change, and socioeconomic indicators is carried out to prioritize watersheds for natural resource conservation and management. Knowledge-based weights and ranks are normalized, and weighted linear combination technique is adopted to determine final priority value. The watersheds are classified into four priority zones (very high priority, high priority, medium priority, and low priority) on the basis of quartiles of the priority value, thus indicating their ecological status in terms of degradation caused by anthropogenic disturbances. The correlation between priority ranks of individual indicators and integrated indicators is drawn. The results reveal that socioeconomic indicators are the most important drivers of LULC change and environmental degradation in the catchment. Moreover, the magnitude and intensity of anthropogenic impact is not uniform in different watersheds of Lidder catchment. Therefore, any conservation and management strategy must be formulated on the basis of watershed prioritization.
NASA Astrophysics Data System (ADS)
Malik, Mohammad Imran; Bhat, M. Sultan
2014-12-01
The Himalayan watersheds are susceptible to various forms of degradation due to their sensitive and fragile ecological disposition coupled with increasing anthropogenic disturbances. Owing to the paucity of appropriate technology and financial resources, the prioritization of watersheds has become an inevitable process for effective planning and management of natural resources. Lidder catchment constitutes a segment of the western Himalayas with an area of 1,159.38 km2. The study is based on integrated analysis of remote sensing, geographic information system, field study, and socioeconomic data. Multicriteria evaluation of geophysical, land-use and land-cover (LULC) change, and socioeconomic indicators is carried out to prioritize watersheds for natural resource conservation and management. Knowledge-based weights and ranks are normalized, and weighted linear combination technique is adopted to determine final priority value. The watersheds are classified into four priority zones (very high priority, high priority, medium priority, and low priority) on the basis of quartiles of the priority value, thus indicating their ecological status in terms of degradation caused by anthropogenic disturbances. The correlation between priority ranks of individual indicators and integrated indicators is drawn. The results reveal that socioeconomic indicators are the most important drivers of LULC change and environmental degradation in the catchment. Moreover, the magnitude and intensity of anthropogenic impact is not uniform in different watersheds of Lidder catchment. Therefore, any conservation and management strategy must be formulated on the basis of watershed prioritization.
Hanford Site Asbestos Abatement Plan. Revision 1
DOE Office of Scientific and Technical Information (OSTI.GOV)
Mewes, B.S.
The Hanford Site Asbestos Abatement Plan (Plan) lists priorities for asbestos abatement activities to be conducted in Hanford Site facilities. The Plan is based on asbestos assessment information gathered in fiscal year 1989 that evaluated all Hanford Site facilities for the presence and condition of asbestos. Of those facilities evaluated, 414 contain asbestos-containing materials and are classified according to the potential risk of asbestos exposure to building personnel. The Plan requires that asbestos condition update reports be prepared for all affected facilities. The reporting is completed by the asbestos coordinator for each of the 414 affected facilities and transmitted tomore » the Plan manager annually. The Plan manager uses this information to reprioritize future project lists. Currently, five facilities are determined to be Class Al, indicating a high potential for asbestos exposure. Class Al and B1 facilities are the highest priority for asbestos abatement. Abatement of the Class A1 and Bl facilities is scheduled through fiscal year 1997. Removal of asbestos in B1 facilities will reduce the risk for further Class ``A`` conditions to arise.« less
NASA Astrophysics Data System (ADS)
Jaafar, Hazriq Izzuan; Latif, Norfaneysa Abd; Kassim, Anuar Mohamed; Abidin, Amar Faiz Zainal; Hussien, Sharifah Yuslinda Syed; Aras, Mohd Shahrieel Mohd
2015-05-01
Advanced manufacturing technology made Gantry Crane System (GCS) is one of the suitable heavy machinery transporters and frequently employed in handling with huge materials. The interconnection of trolley movement and payload oscillation has a technical impact which needs to be considered. Once the trolley moves to the desired position with high speed, this will induce undesirable's payload oscillation. This frequent unavoidable load swing causes an efficiency drop, load damages and even accidents. In this paper, a new control strategy of Firefly Algorithm (FA) will be developed to obtain five optimal controller parameters (PID and PD) via Priority-based Fitness Scheme (PFS). Combinations of these five parameters are utilized for controlling trolley movement and minimizing the angle of payload oscillation. This PFS is prioritized based on steady-state error (SSE), overshoot (OS) and settling time (Ts) according to the needs and circumstances. Lagrange equation will be chosen for modeling and simulation will be conducted by using related software. Simulation results show that the proposed control strategy is efficient to control the trolley movement to the desired position and minimize the angle of payload oscillation.
ERIC Educational Resources Information Center
Grimm, Fritz; Born, Sigrid
This document provides an overview of the major research priorities of biotechnology and the use of what is known as "regrowing raw materials" in agriculture in the Federal Republic of Germany. Following an introduction, section 2 addresses biotechnology in agriculture, including biotechnology and genetic engineering, the significance of…
ERIC Educational Resources Information Center
Clark, John L. D.; Johnson, Dora E.
Materials development needs in the less commonly taught languages were surveyed in order to update an earlier conference report and set priorities for the 1980s. Questionnaires were developed for university department chairpersons, instructors, and business language programs. The survey response data are reported on (1) teaching program structure,…
Bercaru, Ofelia; Gawlik, Bernd Manfred; Ulberth, Franz; Vandecasteele, Carlo
2003-08-01
During recent years, the awareness of quality assurance and quality control in environmental analyses has constantly increased, especially due to the implementation of new guidelines and regulations at both the national and international level. Achieving comparable results by using certified reference materials is one of the primary concerns of the scientific community. As a result, there is a growing demand for certified reference materials to cover different matrices and pollutants. Moreover, these CRMs should be in close relationship to the determinants and target concentrations required by environmental bodies and European Directives as well. Supplementary information to this paper presents an inventory of reference materials available on the market from different suppliers against the priority pollutants listed in the Water Framework Directive. These CRMs cover matrices such as water, sediment and biota. The use of CRMs in relationship to appropriate analytical methods and relevant determinants is discussed and the need for matrix-CRMs, particularly for organic pollutants is emphasised. The use of proficiency testing schemes as an alternative for the lack of appropriate CRMs and future trends in the production of CRMs within the BCR framework are also discussed.
NASA Astrophysics Data System (ADS)
Sayan, Safak; Vanelderen, Pieter; Hetel, Iulian; Chan, BT; Raghavan, Praveen; Blanco, Victor; Foubert, Philippe; D'urzo, Lucia; De Simone, Danilo; Vandenberghe, Geert
2017-04-01
There are many knobs available that change the chemical and physical properties of the photoresists to "break" the RLS (Resolution, Sensitivity, Line edge/width roughness) trade-off, however those are not enough today to realize a material to satisfy all requirements at once for 7nm technology and beyond. DDRP improves the ultimate achievable resolution via pattern collapse mitigation, hence the priority of requirements for the EUV photoresist development may be changed with more focus on Sensitivity and LWR. This may potentially provide a new conceptual approach towards EUV PR development for DDRP applications. We have previously demonstrated pattern collapse (PC) mitigation via DDRP on different EUVL photoresists (including different resist platforms), achieving ultimate resolution and exposure latitude improvements [1,2]. In this contribution, we report patterning and material defect performance of HVM compatible (all aqueous) dry development rinse material. We will also report on process window improvement on 2-dimensional metal structures towards standard cell size reduction with elimination of mask layer(s) using single EUV exposure.
Economical ground data delivery
NASA Technical Reports Server (NTRS)
Markley, Richard W.; Byrne, Russell H.; Bromberg, Daniel E.
1994-01-01
Data delivery in the Deep Space Network (DSN) involves transmission of a small amount of constant, high-priority traffic and a large amount of bursty, low priority data. The bursty traffic may be initially buffered and then metered back slowly as bandwidth becomes available. Today both types of data are transmitted over dedicated leased circuits. The authors investigated the potential of saving money by designing a hybrid communications architecture that uses leased circuits for high-priority network communications and dial-up circuits for low-priority traffic. Such an architecture may significantly reduce costs and provide an emergency backup. The architecture presented here may also be applied to any ground station-to-customer network within the range of a common carrier. The authors compare estimated costs for various scenarios and suggest security safeguards that should be considered.
Bavuso, Karen; Bouyer-Ferullo, Sharon; Goldsmith, Denise; Fairbanks, Amanda; Gesner, Emily; Lagor, Charles; Collins, Sarah
2016-01-01
Summary Objectives To understand requests for nursing Clinical Decision Support (CDS) interventions at a large integrated health system undergoing vendor-based EHR implementation. In addition, to establish a process to guide both short-term implementation and long-term strategic goals to meet nursing CDS needs. Materials and Methods We conducted an environmental scan to understand current state of nursing CDS over three months. The environmental scan consisted of a literature review and an analysis of CDS requests received from across our health system. We identified existing high priority CDS and paper-based tools used in nursing practice at our health system that guide decision-making. Results A total of 46 nursing CDS requests were received. Fifty-six percent (n=26) were specific to a clinical specialty; 22 percent (n=10) were focused on facilitating clinical consults in the inpatient setting. “Risk Assessments/Risk Reduction/Promotion of Healthy Habits” (n=23) was the most requested High Priority Category received for nursing CDS. A continuum of types of nursing CDS needs emerged using the Data-Information-Knowledge-Wisdom Conceptual Framework: 1) facilitating data capture, 2) meeting information needs, 3) guiding knowledge-based decision making, and 4) exposing analytics for wisdom-based clinical interpretation by the nurse. Conclusion Identifying and prioritizing paper-based tools that can be modified into electronic CDS is a challenge. CDS strategy is an evolving process that relies on close collaboration and engagement with clinical sites for short-term implementation and should be incorporated into a long-term strategic plan that can be optimized and achieved overtime. The Data-Information-Knowledge-Wisdom Conceptual Framework in conjunction with the High Priority Categories established may be a useful tool to guide a strategic approach for meeting short-term nursing CDS needs and aligning with the organizational strategic plan. PMID:27437036
ERIC Educational Resources Information Center
Petrina, Neysa; Carter, Mark; Stephenson, Jennifer
2015-01-01
Parental perceptions of the importance of friendship development in comparison to other outcome priorities are examined in this research. Parents of children with high functioning autism between the age of 5-10?years (N?=?74) were asked to rate and rank the importance of the following six outcome priorities: friendship, social skills, physical and…
Bright, Candace Forbes; Bagley, Braden; Pulliam, Ivie; Newton, Amy Swetha
2018-01-01
Community engagement-the collaborative process of addressing issues that impact the well-being of a community-is a strategic effort to address community issues. The Gulf States Health Policy Center (GS-HPC) formed the Hattiesburg Area Health Coalition (HAHC) in November 2014 for the purpose of addressing policies impacting the health of Forrest and Lamar counties in Mississippi. To chronicle the community-based participatory research (CBPR) process used by HAHC's identification of infant and maternal health as a policy area, domestic violence in pregnancy as a priority area within infant and maternal health, and a community action plan (CAP) regarding this priority area. HAHC reviewed data and identified infant and maternal health as a priority area. They then conducted a policy scan of local prenatal health care to determine the policy area of domestic violence in pregnancy. HAHC developed a CAP identifying three goals with regard to domestic violence and pregnancy that together informed policy. Changes included the development of materials specific to resources available in the area. The materials and recommended changes will first be implemented by Southeast Mississippi Rural Health Initiative (SeMRHI) through a screening question for all pregnant patients, and the adoption of policies for providing information and referrals. The lack of community-level data was a challenge to HAHC in identifying focus and priority areas, but this was overcome by shared leadership and community engagement. After completion of the CAP, 100% of expecting mothers receiving prenatal care in the area will be screened for domestic violence.
Crist, Michele R.; Knick, Steven T.; Hanser, Steven E.
2017-01-01
The delineation of priority areas in western North America for managing Greater Sage-Grouse (Centrocercus urophasianus) represents a broad-scale experiment in conservation biology. The strategy of limiting spatial disturbance and focusing conservation actions within delineated areas may benefit the greatest proportion of Greater Sage-Grouse. However, land use under normal restrictions outside priority areas potentially limits dispersal and gene flow, which can isolate priority areas and lead to spatially disjunct populations. We used graph theory, representing priority areas as spatially distributed nodes interconnected by movement corridors, to understand the capacity of priority areas to function as connected networks in the Bi-State, Central, and Washington regions of the Greater Sage-Grouse range. The Bi-State and Central networks were highly centralized; the dominant pathways and shortest linkages primarily connected a small number of large and centrally located priority areas. These priority areas are likely strongholds for Greater Sage-Grouse populations and might also function as refugia and sources. Priority areas in the Central network were more connected than those in the Bi-State and Washington networks. Almost 90% of the priority areas in the Central network had ≥2 pathways to other priority areas when movement through the landscape was set at an upper threshold (effective resistance, ER12). At a lower threshold (ER4), 83 of 123 priority areas in the Central network were clustered in 9 interconnected subgroups. The current conservation strategy has risks; 45 of 61 priority areas in the Bi-State network, 68 of 123 in the Central network, and all 4 priority areas in the Washington network had ≤1 connection to another priority area at the lower ER4threshold. Priority areas with few linkages also averaged greater environmental resistance to movement along connecting pathways. Without maintaining corridors to larger priority areas or a clustered group, isolation of small priority areas could lead to regional loss of Greater Sage-Grouse
Setting stroke research priorities: The consumer perspective.
Sangvatanakul, Pukkaporn; Hillege, Sharon; Lalor, Erin; Levi, Christopher; Hill, Kelvin; Middleton, Sandy
2010-12-01
To test a method of engaging consumers in research priority-setting using a quantitative approach and to determine consumer views on stroke research priorities for clinical practice recommendations with lower levels of evidence (Level III and Level IV) and expert consensus opinion as published in the Australian stroke clinical practice guidelines. Survey Urban community Eighteen stroke survivors (n = 12) and carers (n = 6) who were members of the "Working Aged Group - Stroke" (WAGS) consumer support group. Phase I: Participants were asked whether recommendations were "worth" researching ("yes" or "no"); and, if researched, what potential impact they likely would have on patient outcomes. Phase II: Participants were asked to rank recommendations rated by more than 75% of participants in Phase I as "worth" researching and "highly likely" or "likely" to generate research with a significant effect on patient outcomes (n = 13) in order of priority for future stroke research. All recommendations were rated by at least half (n = 9, 50%) of participants as "worth" researching. The majority (67% to 100%) rated all recommendations as "highly likely" or "likely" that research would have a significant effect on patient outcomes. Thirteen out of 20 recommendations were ranked for their research priorities. Recommendations under the topic heading Getting to hospital were ranked highest and Organization of care and Living with stroke were ranked as a lower priority for research. This study provided an example of how to involve consumers in research priority setting successfully using a quantitative approach. Stroke research priorities from the consumer perspective were different from those of health professionals, as published in the literature; thus, consumer opinion should be considered when setting research priorities. Copyright © 2010 Society for Vascular Nursing, Inc. Published by Mosby, Inc. All rights reserved.
MEPAG Recommendations for a 2018 Mars Sample Return Caching Lander - Sample Types, Number, and Sizes
NASA Technical Reports Server (NTRS)
Allen, Carlton C.
2011-01-01
The return to Earth of geological and atmospheric samples from the surface of Mars is among the highest priority objectives of planetary science. The MEPAG Mars Sample Return (MSR) End-to-End International Science Analysis Group (MEPAG E2E-iSAG) was chartered to propose scientific objectives and priorities for returned sample science, and to map out the implications of these priorities, including for the proposed joint ESA-NASA 2018 mission that would be tasked with the crucial job of collecting and caching the samples. The E2E-iSAG identified four overarching scientific aims that relate to understanding: (A) the potential for life and its pre-biotic context, (B) the geologic processes that have affected the martian surface, (C) planetary evolution of Mars and its atmosphere, (D) potential for future human exploration. The types of samples deemed most likely to achieve the science objectives are, in priority order: (1A). Subaqueous or hydrothermal sediments (1B). Hydrothermally altered rocks or low temperature fluid-altered rocks (equal priority) (2). Unaltered igneous rocks (3). Regolith, including airfall dust (4). Present-day atmosphere and samples of sedimentary-igneous rocks containing ancient trapped atmosphere Collection of geologically well-characterized sample suites would add considerable value to interpretations of all collected rocks. To achieve this, the total number of rock samples should be about 30-40. In order to evaluate the size of individual samples required to meet the science objectives, the E2E-iSAG reviewed the analytical methods that would likely be applied to the returned samples by preliminary examination teams, for planetary protection (i.e., life detection, biohazard assessment) and, after distribution, by individual investigators. It was concluded that sample size should be sufficient to perform all high-priority analyses in triplicate. In keeping with long-established curatorial practice of extraterrestrial material, at least 40% by mass of each sample should be preserved to support future scientific investigations. Samples of 15-16 grams are considered optimal. The total mass of returned rocks, soils, blanks and standards should be approximately 500 grams. Atmospheric gas samples should be the equivalent of 50 cubic cm at 20 times Mars ambient atmospheric pressure.
NASA Astrophysics Data System (ADS)
Lam, Carl
Due to technology proliferation, the environmental burden attributed to the production, use, and disposal of hazardous materials in electronics have become a worldwide concern. The major theme of this dissertation is to develop and apply hazardous materials assessment tools to systematically guide pollution prevention opportunities in the context of electronic product design, manufacturing and end-of-life waste management. To this extent, a comprehensive review is first provided on describing hazard traits and current assessment methods to evaluate hazardous materials. As a case study at the manufacturing level, life cycle impact assessment (LCIA)-based and risk-based screening methods are used to quantify chemical and geographic environmental impacts in the U.S. printed wiring board (PWB) industry. Results from this industrial assessment clarify priority waste streams and States to most effectively mitigate impact. With further knowledge of PWB manufacturing processes, select alternative chemical processes (e.g., spent copper etchant recovery) and material options (e.g., lead-free etch resist) are discussed. In addition, an investigation on technology transition effects for computers and televisions in the U.S. market is performed by linking dynamic materials flow and environmental assessment models. The analysis forecasts quantities of waste units generated and maps shifts in environmental impact potentials associated with metal composition changes due to product substitutions. This insight is important to understand the timing and waste quantities expected and the emerging toxic elements needed to be addressed as a consequence of technology transition. At the product level, electronic utility meter devices are evaluated to eliminate hazardous materials within product components. Development and application of a component Toxic Potential Indicator (TPI) assessment methodology highlights priority components requiring material alternatives. Alternative recommendations are provided and substitute materials such as aluminum alloys for stainless steel and high-density polyethylene for polyvinyl chloride and acrylonitrile-based polymers show promise to meet toxicity reduction, cost, and material functionality requirements. Furthermore, the TPI method, an European Union focused screening tool, is customized to reflect regulated U.S. toxicity parameters. Results show that, although it is possible to adopt U.S. parameters into the TPI method, harmonization of toxicity regulation and standards in various nations and regions is necessary to eliminate inconsistencies during hazard screening of substances used globally. As a whole, the present work helps to assimilate material hazard assessment methods into the larger framework of design for environment strategies so toxics use reduction could be achieved for the development and management of electronics and other consumer goods.
High-Priority Directions of Modernization of University Education in Innovational Society
ERIC Educational Resources Information Center
Sergeev, Nikolai
2017-01-01
Purpose: The purpose of this paper is to verify the offered hypothesis and to determine high-priority directions of modernization of university education in an innovational society by the example of modern Russia. Design/methodology/approach: During the empirical study of connection between university education and innovational development of…
25 CFR Appendix A to Subpart C - IRR High Priority Project Scoring Matrix
Code of Federal Regulations, 2010 CFR
2010-04-01
...—IRR High Priority Project Scoring Matrix Score 10 5 3 1 0 Accident and fatality rate for candidate route 1 Severe X Moderate Minimal No accidents. Years since last IRR construction project completed... elements Addresses 1 element. 1 National Highway Traffic Safety Board standards. 2 Total funds requested...
Obligations to High Priority Target Groups: Philosophical Implications.
ERIC Educational Resources Information Center
Christmas, June Jackson
Community mental health center services must be most plentiful where the need is greatest and must be appropriate and available to meet these needs. The first high priority group, according to statistics on juvenile delinquency, and narcotics, is the black inner city. Socio-psychiatric services, numerous enough in quantity to begin to meet needs…
Restoring High Priority Habitats for Birds: Aspen and Pine in the Interior West
Rex Sallabanks; Nils D. Christoffersen; Whitney W. Weatherford; Ralph Anderson
2005-01-01
This paper describes a long-term habitat restoration project in the Blue Mountains ecoregion, northeast Oregon, that we initiated in May 2000. We focused our restoration activities on two habitats previously identified as being high priority for birds: quaking aspen (Populus tremuloides) and ponderosa pine (Pinus ponderosa). In...
Ephedrine QoS: An Antidote to Slow, Congested, Bufferless NoCs
Fang, Juan; Yao, Zhicheng; Sui, Xiufeng; Bao, Yungang
2014-01-01
Datacenters consolidate diverse applications to improve utilization. However when multiple applications are colocated on such platforms, contention for shared resources like networks-on-chip (NoCs) can degrade the performance of latency-critical online services (high-priority applications). Recently proposed bufferless NoCs (Nychis et al.) have the advantages of requiring less area and power, but they pose challenges in quality-of-service (QoS) support, which usually relies on buffer-based virtual channels (VCs). We propose QBLESS, a QoS-aware bufferless NoC scheme for datacenters. QBLESS consists of two components: a routing mechanism (QBLESS-R) that can substantially reduce flit deflection for high-priority applications and a congestion-control mechanism (QBLESS-CC) that guarantees performance for high-priority applications and improves overall system throughput. We use trace-driven simulation to model a 64-core system, finding that, when compared to BLESS, a previous state-of-the-art bufferless NoC design, QBLESS, improves performance of high-priority applications by an average of 33.2% and reduces network-hops by an average of 42.8%. PMID:25250386
49 CFR 350.329 - How may a State or local agency qualify for High Priority or Border Activity Funds?
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 5 2010-10-01 2010-10-01 false How may a State or local agency qualify for High... How may a State or local agency qualify for High Priority or Border Activity Funds? (a) States must... with the State lead MCSAP agency to ensure the proposal is consistent with State and national CMV...
49 CFR 350.329 - How may a State or local agency qualify for High Priority or Border Activity Funds?
Code of Federal Regulations, 2011 CFR
2011-10-01
... 49 Transportation 5 2011-10-01 2011-10-01 false How may a State or local agency qualify for High... How may a State or local agency qualify for High Priority or Border Activity Funds? (a) States must... with the State lead MCSAP agency to ensure the proposal is consistent with State and national CMV...
Nash, J.T.
1999-01-01
Field observations, sampling of mine dumps and mine drainage waters, and laboratory studies of dump materials have been made at mining areas deemed to be on public lands administered by the USDA Forest Service in the Mineral Creek watershed. Results of chemical analyses of dump materials, leachates of those materials, and of surface waters draining mines or dumps provide indications of where acid is generated or consumed, and what metals are mobilized below mines or dumps. Information on 25 sites is reviewed and reclamation priorities are ranked into four classes (high, medium, low priority, or no work required). The western side of the upper Animas watershed (the Mineral Creek watershed) has a history of mining and prospecting for about 130 years. The intensity of miningrelated disturbance is higher than in most parts of the San Juan Mountains region, but actually is much less than the eastern half of the watershed (US BLM lands) and none of the mines moved millions of tons of rock and ore as in some of the eastern mines. The majority of the roughly one thousand mining sites on the USFS lands are very small (less than 100 tons or 70 cubic yards of dump material), are more than 2 miles from a major stream, or are so inaccessible as to prohibit reclamation. Twenty five sites have been considered by others to have significant size and potential for significant environmental degradation. These most significant mining areas were evaluated by multiple criteria, including tendency to generate acid or liberate toxic metals, observed acidic pH or dead vegetation (?kill zones?) below dumps or adits, potential mobility of metals, and likelihood of transport into streams of the watershed. In the author?s opinion, no single measurable parameter, such as metal concentration, is reliable for ranking significance or feasibility of reclamation. Rather, subjective estimates are required to evaluate combinations of, or interactions among, several parameters. The most subjective estimate in ranking feasibility of reclamation is the amount of natural and mine-related contamination at each mining area. Mitigation of natural contributions at mines or unmined areas is beyond the scope of these Abandoned Mine Lands (AML) investigations, but must be considered when planning reclamation. Available information for the 25 problem sites is adequate for ranking, but at some sites additional information on groundwater conditions is needed for a more reliable ranking and evaluation of reclamation methods.
Strategic Research Directions In Microgravity Materials Science
NASA Technical Reports Server (NTRS)
Clinton, Raymond G., Jr.; Wargo, Michael J.; Marzwell, Neville L.; Sanders, Gerald; Schlagheck, Ron; Semmes, Ed; Bassler, Julie; Cook, Beth
2004-01-01
The Office of Biological and Physical Research (OBPR) is moving aggressively to align programs, projects, and products with the vision for space exploration. Research in advanced materials is a critical element in meeting exploration goals. Research in low gravity materials science in OBPR is being focused on top priority needs in support of exploration: 1) Space Radiation Shielding; 2) In Situ Resource Utilization; 3) In Situ Fabrication and Repair; 4) Materials Science for Spacecraft and Propulsion Systems; 5) Materials Science for Advanced Life Support Systems. Roles and responsibilities in low gravity materials research for exploration between OBPR and the Office of Exploration Systems are evolving.
Hummingbird Comet Nucleus Analysis Mission
NASA Technical Reports Server (NTRS)
Kojiro, Daniel; Carle, Glenn C.; Lasher, Larry E.
2000-01-01
Hummingbird is a highly focused scientific mission, proposed to NASA s Discovery Program, designed to address the highest priority questions in cometary science-that of the chemical composition of the cometary nucleus. After rendezvous with the comet, Hummingbird would first methodically image and map the comet, then collect and analyze dust, ice and gases from the cometary atmosphere to enrich characterization of the comet and support landing site selection. Then, like its namesake, Hummingbird would carefully descend to a pre-selected surface site obtaining a high-resolution image, gather a surface material sample, acquire surface temperature and then immediately return to orbit for detailed chemical and elemental analyses followed by a high resolution post-sampling image of the site. Hummingbird s analytical laboratory contains instrumentation for a comprehensive molecular and elemental analysis of the cometary nucleus as well as an innovative surface sample acquisition device.
L'vov, D K; Shchelkanov, M Iu; Deriabin, P G; Burtseva, E I; Galkina, I V; Grebennikova, T V; Prilipov, A G; Usachev, E V; Liapina, O V; Shliapnikova, O V; Poglazov, A B; Slavskiĭ, A A; Morozova, T N; Vasil'ev, A V; Zaberezhnyĭ, A D; Dzharkenov, A F; Gabbasov, F B; Evdokimova, M I; Aliper, T I; Litvin, K E; Gromashevskiĭ, V L; Vlasov, N A; Iashkulov, K B; Kovtunov, A I; Onishchenko, G G; Nepoklonov, E A; Suarez, D L
2006-01-01
Molecular virological studies of the field material collected in the epicenter of epizooty with high mortality among mute swans (Cygnus olor) in the area of the lower estuary of the Volga River (November 2005) could establish the etiological role of highly pathogenic influenza A (HPAI) virus of the subtype H5N1. Ten HPAI/H5N1 strains deposited at the State Collection of Viruses of the Russian Federation with the priority dated December 1, 2005 were isolated from the cloacal/tracheal swabs and viscera of sick and freshly died mute swans. Complete nucleotide sequences of all fragments of the genome of 6 strains have been deposited in the Gene Bank. The paper discusses the molecular genetic characteristics of isolated strains.
Crist, Michele R.; Knick, Steven T.; Hanser, Steven E.
2015-09-08
The network of areas delineated in 11 Western States for prioritizing management of greater sage-grouse (Centrocercus urophasianus) represents a grand experiment in conservation biology and reserve design. We used centrality metrics from social network theory to gain insights into how this priority area network might function. The network was highly centralized. Twenty of 188 priority areas accounted for 80 percent of the total centrality scores. These priority areas, characterized by large size and a central location in the range-wide distribution, are strongholds for greater sage-grouse populations and also might function as sources. Mid-ranking priority areas may serve as stepping stones because of their location between large central and smaller peripheral priority areas. The current network design and conservation strategy has risks. The contribution of almost one-half (n = 93) of the priority areas combined for less than 1 percent of the cumulative centrality scores for the network. These priority areas individually are likely too small to support viable sage-grouse populations within their boundary. Without habitat corridors to connect small priority areas either to larger priority areas or as a clustered group within the network, their isolation could lead to loss of sage-grouse within these regions of the network.
Fast simulation of packet loss rates in a shared buffer communications switch
NASA Technical Reports Server (NTRS)
Chang, Cheng-Shang; Heidelberger, Philip; Shahabuddin, Perwez
1993-01-01
This paper describes an efficient technique for estimating, via simulation, the probability of buffer overflows in a queueing model that arises in the analysis of ATM (Asynchronous Transfer Mode) communication switches. There are multiple streams of (autocorrelated) traffic feeding the switch that has a buffer of finite capacity. Each stream is designated as either being of high or low priority. When the queue length reaches a certain threshold, only high priority packets are admitted to the switch's buffer. The problem is to estimate the loss rate of high priority packets. An asymptotically optimal importance sampling approach is developed for this rare event simulation problem. In this approach, the importance sampling is done in two distinct phases. In the first phase, an importance sampling change of measure is used to bring the queue length up to the threshold at which low priority packets get rejected. In the second phase, a different importance sampling change of measure is used to move the queue length from the threshold to the buffer capacity.
May-Collado, Laura J.; Agnarsson, Ingi
2011-01-01
Background Habitat loss and overexploitation are among the primary factors threatening populations of many mammal species. Recently, aquatic mammals have been highlighted as particularly vulnerable. Here we test (1) if aquatic mammals emerge as more phylogenetically urgent conservation priorities than their terrestrial relatives, and (2) if high priority species are receiving sufficient conservation effort. We also compare results among some phylogenetic conservation methods. Methodology/Principal Findings A phylogenetic analysis of conservation priorities for all 620 species of Cetartiodactyla and Carnivora, including most aquatic mammals. Conservation priority ranking of aquatic versus terrestrial species is approximately proportional to their diversity. However, nearly all obligated freshwater cetartiodactylans are among the top conservation priority species. Further, ∼74% and 40% of fully aquatic cetartiodactylans and carnivores, respectively, are either threatened or data deficient, more so than their terrestrial relatives. Strikingly, only 3% of all ‘high priority’ species are thought to be stable. An overwhelming 97% of these species thus either show decreasing population trends (87%) or are insufficiently known (10%). Furthermore, a disproportional number of highly evolutionarily distinct species are experiencing population decline, thus, such species should be closely monitored even if not currently threatened. Comparison among methods reveals that exact species ranking differs considerably among methods, nevertheless, most top priority species consistently rank high under any method. While we here favor one approach, we also suggest that a consensus approach may be useful when methods disagree. Conclusions/Significance These results reinforce prior findings, suggesting there is an urgent need to gather basic conservation data for aquatic mammals, and special conservation focus is needed on those confined to freshwater. That evolutionarily distinct—and thus ‘biodiverse’—species are faring relatively poorly is alarming and requires further study. Our results offer a detailed guide to phylogeny-based conservation prioritization for these two orders. PMID:21799899
SU-E-T-551: Monitor Unit Optimization in Stereotactic Body Radiation Therapy for Stage I Lung Cancer
DOE Office of Scientific and Technical Information (OSTI.GOV)
Huang, B-T; Lu, J-Y
2015-06-15
Purpose: The study aims to reduce the monitor units (MUs) in the stereotactic body radiation therapy (SBRT) treatment for lung cancer by adjusting the optimizing parameters. Methods: Fourteen patients suffered from stage I Non-Small Cell Lung Cancer (NSCLC) were enrolled. Three groups of parameters were adjusted to investigate their effects on MU numbers and organs at risk (OARs) sparing: (1) the upper objective of planning target volume (UOPTV); (2) strength setting in the MU constraining objective; (3) max MU setting in the MU constraining objective. Results: We found that the parameters in the optimizer influenced the MU numbers in amore » priority, strength and max MU dependent manner. MU numbers showed a decreasing trend with the UOPTV increasing. MU numbers with low, medium and high priority for the UOPTV were 428±54, 312±48 and 258±31 MU/Gy, respectively. High priority for UOPTV also spared the heart, cord and lung while maintaining comparable PTV coverage than the low and medium priority group. It was observed that MU numbers tended to decrease with the strength increasing and max MU setting decreasing. With maximum strength, the MU numbers reached its minimum while maintaining comparable or improved dose to the normal tissues. It was also found that the MU numbers continued to decline at 85% and 75% max MU setting but no longer to decrease at 50% and 25%. Combined with high priority for UOPTV and MU constraining objectives, the MU numbers can be decreased as low as 223±26 MU/Gy. Conclusion:: The priority of UOPTV, MU constraining objective in the optimizer impact on the MU numbers in SBRT treatment for lung cancer. Giving high priority to the UOPTV, setting the strength to maximum value and the max MU to 50% in the MU objective achieves the lowest MU numbers while maintaining comparable or improved OAR sparing.« less
Veach, Victoria; Moilanen, Atte; Di Minin, Enrico
2017-01-01
Including threats in spatial conservation prioritization helps identify areas for conservation actions where biodiversity is at imminent risk of extinction. At the global level, an important limitation when identifying spatial priorities for conservation actions is the lack of information on the spatial distribution of threats. Here, we identify spatial conservation priorities under three prominent threats to biodiversity (residential and commercial development, agricultural expansion, and forest loss), which are primary drivers of habitat loss and threaten the persistence of the highest number of species in the International Union for the Conservation of Nature (IUCN) Red List, and for which spatial data is available. We first explore how global priority areas for the conservation of vertebrate (mammals, birds, and amphibians) species coded in the Red List as vulnerable to each threat differ spatially. We then identify spatial conservation priorities for all species vulnerable to all threats. Finally, we identify the potentially most threatened areas by overlapping the identified priority areas for conservation with maps for each threat. We repeat the same with four other well-known global conservation priority area schemes, namely Key Biodiversity Areas, Biodiversity Hotspots, the global Protected Area Network, and Wilderness Areas. We find that residential and commercial development directly threatens only about 4% of the global top 17% priority areas for species vulnerable under this threat. However, 50% of the high priority areas for species vulnerable to forest loss overlap with areas that have already experienced some forest loss. Agricultural expansion overlapped with ~20% of high priority areas. Biodiversity Hotspots had the greatest proportion of their total area under direct threat from all threats, while expansion of low intensity agriculture was found to pose an imminent threat to Wilderness Areas under future agricultural expansion. Our results identify areas where limited resources should be allocated to mitigate risks to vertebrate species from habitat loss.
Moilanen, Atte; Di Minin, Enrico
2017-01-01
Including threats in spatial conservation prioritization helps identify areas for conservation actions where biodiversity is at imminent risk of extinction. At the global level, an important limitation when identifying spatial priorities for conservation actions is the lack of information on the spatial distribution of threats. Here, we identify spatial conservation priorities under three prominent threats to biodiversity (residential and commercial development, agricultural expansion, and forest loss), which are primary drivers of habitat loss and threaten the persistence of the highest number of species in the International Union for the Conservation of Nature (IUCN) Red List, and for which spatial data is available. We first explore how global priority areas for the conservation of vertebrate (mammals, birds, and amphibians) species coded in the Red List as vulnerable to each threat differ spatially. We then identify spatial conservation priorities for all species vulnerable to all threats. Finally, we identify the potentially most threatened areas by overlapping the identified priority areas for conservation with maps for each threat. We repeat the same with four other well-known global conservation priority area schemes, namely Key Biodiversity Areas, Biodiversity Hotspots, the global Protected Area Network, and Wilderness Areas. We find that residential and commercial development directly threatens only about 4% of the global top 17% priority areas for species vulnerable under this threat. However, 50% of the high priority areas for species vulnerable to forest loss overlap with areas that have already experienced some forest loss. Agricultural expansion overlapped with ~20% of high priority areas. Biodiversity Hotspots had the greatest proportion of their total area under direct threat from all threats, while expansion of low intensity agriculture was found to pose an imminent threat to Wilderness Areas under future agricultural expansion. Our results identify areas where limited resources should be allocated to mitigate risks to vertebrate species from habitat loss. PMID:29182662
Bernhard, M.C.; Evans, M.B.; Kent, S.T.; Johnson, E.; Threadgill, S.L.; Tyson, S.; Becker, S.M.; Gohlke, J.M.
2013-01-01
Objectives Understanding and effectively addressing persistent health disparities in minority communities requires a clear picture of members’ concerns and priorities. This study was intended to engage residents in urban and rural communities in order to identify environmental health priorities. Specific emphasis was placed on how the communities defined the term environment, their perceptions of environmental exposures as affecting their health, specific priorities in their communities, and differences in urban versus rural populations. Study design A community-engaged approach was used to develop and implement focus groups and compare environmental health priorities in urban versus rural communities. Methods A total of eight focus groups were conducted: four in rural and four in urban communities. Topics included defining the term environment, how the environment may affect health, and environmental priorities within their communities, using both open discussion and a predefined list. Data were analysed both qualitatively and quantitatively to identify patterns and trends. Results There were important areas of overlap in priorities between urban and rural communities; both emphasized the importance of the social environment and shared a concern over air pollution from industrial sources. In contrast, for urban focus groups, abandoned houses and their social and physical sequelae were a high priority while concerns about adequate sewer and water services and road maintenance were high priorities in rural communities. Conclusions This study was able to identify environmental health priorities in urban versus rural minority communities. In contrast to some previous risk perception research, the results of this study suggest prioritization of tangible, known risks in everyday life instead of rare, disaster-related events, even in communities that have recently experienced devastating damage from tornadoes. The findings can help inform future efforts to study, understand and effectively address environmental issues, and are particularly relevant to developing effective community-based strategies in vulnerable populations. PMID:24239281
Research priorities in mental health occupational therapy: A study of clinician perspectives.
Hitch, Danielle; Lhuede, Kate
2015-10-01
The evidence to support mental health occupational therapy has proliferated in the early years of this century, but this growth has tended to be organic rather than targeted. Previous efforts to identify research priorities in this area of practice are either out dated, or encompass discrete areas of practice. The aim of this study was to identify priority areas for research in mental health occupational therapy from clinician's perspectives. A Policy Delphi method was used to enable occupational therapists to define and differentiate their perspectives on research priorities. Forty-two occupational therapists took part in the first two rounds of this method, with 69% (n = 29) going on to complete the third and final round of data collection. A Likert scale was used to rate the importance of each priority, and descriptive quantitative analysis undertaken to identify those most consistently identified as being highly important. Four research priorities were identified as being highly important in this study: (i) working in an occupationally focussed way; (ii) consumer experience of therapy groups; (iii) identifying factors which increase consumer engagement in occupation; and (iv) engaging patients on the inpatient unit in meaningful and positive occupation. Two of the priority areas are already the subject of substantial evidence bases, but there has been far less research into consumer experiences of groups and occupational engagement in acute settings. Collaboration between research teams and greater consumer inclusion are recommended for the future. This study provides an updated indication of research priorities for mental health occupational therapy in Australia. © 2015 Occupational Therapy Australia.
Two-dimensional priority-based dynamic resource allocation algorithm for QoS in WDM/TDM PON networks
NASA Astrophysics Data System (ADS)
Sun, Yixin; Liu, Bo; Zhang, Lijia; Xin, Xiangjun; Zhang, Qi; Rao, Lan
2018-01-01
Wavelength division multiplexing/time division multiplexing (WDM/TDM) passive optical networks (PON) is being viewed as a promising solution for delivering multiple services and applications. The hybrid WDM / TDM PON uses the wavelength and bandwidth allocation strategy to control the distribution of the wavelength channels in the uplink direction, so that it can ensure the high bandwidth requirements of multiple Optical Network Units (ONUs) while improving the wavelength resource utilization. Through the investigation of the presented dynamic bandwidth allocation algorithms, these algorithms can't satisfy the requirements of different levels of service very well while adapting to the structural characteristics of mixed WDM / TDM PON system. This paper introduces a novel wavelength and bandwidth allocation algorithm to efficiently utilize the bandwidth and support QoS (Quality of Service) guarantees in WDM/TDM PON. Two priority based polling subcycles are introduced in order to increase system efficiency and improve system performance. The fixed priority polling subcycle and dynamic priority polling subcycle follow different principles to implement wavelength and bandwidth allocation according to the priority of different levels of service. A simulation was conducted to study the performance of the priority based polling in dynamic resource allocation algorithm in WDM/TDM PON. The results show that the performance of delay-sensitive services is greatly improved without degrading QoS guarantees for other services. Compared with the traditional dynamic bandwidth allocation algorithms, this algorithm can meet bandwidth needs of different priority traffic class, achieve low loss rate performance, and ensure real-time of high priority traffic class in terms of overall traffic on the network.
ERIC Educational Resources Information Center
Gessaman, Paul H.
This packet contains student materials and an instructor's guide for use in a series of workshops on the "GOALS Process" for persons in retail businesses. The materials provide a framework for individual or family use in self-assessment and a means of identifying business and family life goals, setting priorities, and developing management…
Potential High Priority Subaerial Environments for Mars Sample Return
NASA Astrophysics Data System (ADS)
iMOST Team; Bishop, J. L.; Horgan, B.; Benning, L. G.; Carrier, B. L.; Hausrath, E. M.; Altieri, F.; Amelin, Y.; Ammannito, E.; Anand, M.; Beaty, D. W.; Borg, L. E.; Boucher, D.; Brucato, J. R.; Busemann, H.; Campbell, K. A.; Czaja, A. D.; Debaille, V.; Des Marais, D. J.; Dixon, M.; Ehlmann, B. L.; Farmer, J. D.; Fernandez-Remolar, D. C.; Fogarty, J.; Glavin, D. P.; Goreva, Y. S.; Grady, M. M.; Hallis, L. J.; Harrington, A. D.; Herd, C. D. K.; Humayun, M.; Kleine, T.; Kleinhenz, J.; Mangold, N.; Mackelprang, R.; Mayhew, L. E.; McCubbin, F. M.; Mccoy, J. T.; McLennan, S. M.; McSween, H. Y.; Moser, D. E.; Moynier, F.; Mustard, J. F.; Niles, P. B.; Ori, G. G.; Raulin, F.; Rettberg, P.; Rucker, M. A.; Schmitz, N.; Sefton-Nash, E.; Sephton, M. A.; Shaheen, R.; Shuster, D. L.; Siljestrom, S.; Smith, C. L.; Spry, J. A.; Steele, A.; Swindle, T. D.; ten Kate, I. L.; Tosca, N. J.; Usui, T.; Van Kranendonk, M. J.; Wadhwa, M.; Weiss, B. P.; Werner, S. C.; Westall, F.; Wheeler, R. M.; Zipfel, J.; Zorzano, M. P.
2018-04-01
The highest priority subaerial environments for Mars Sample Return include subaerial weathering (paleosols, periglacial/glacial, and rock coatings/rinds), wetlands (mineral precipitates, redox environments, and salt ponds), or cold spring settings.
32 CFR 245.21 - ESCAT air traffic priority list.
Code of Federal Regulations, 2013 CFR
2013-07-01
... aircraft post-maintenance test flights. (7) Federal aircraft post maintenance check flights in support of... identified as high threat targets. (c) Priority Three. (1) Forces being deployed or performing pre-deployment...
32 CFR 245.21 - ESCAT air traffic priority list.
Code of Federal Regulations, 2010 CFR
2010-07-01
... aircraft post-maintenance test flights. (7) Federal aircraft post maintenance check flights in support of... identified as high threat targets. (c) Priority Three. (1) Forces being deployed or performing pre-deployment...
32 CFR 245.21 - ESCAT air traffic priority list.
Code of Federal Regulations, 2014 CFR
2014-07-01
... aircraft post-maintenance test flights. (7) Federal aircraft post maintenance check flights in support of... identified as high threat targets. (c) Priority Three. (1) Forces being deployed or performing pre-deployment...
32 CFR 245.21 - ESCAT air traffic priority list.
Code of Federal Regulations, 2011 CFR
2011-07-01
... aircraft post-maintenance test flights. (7) Federal aircraft post maintenance check flights in support of... identified as high threat targets. (c) Priority Three. (1) Forces being deployed or performing pre-deployment...
2002-05-16
KENNEDY SPACE CENTER, FLA. - Suspended from the overhead crane, the SHI Research Double Module (SHI/RDM) travels across the Space Station Processing Facility to the payload canister waiting at right. The module will be placed in the canister for transport to the Orbiter Processing Facility where it will be installed in Columbia's payload bay for mission STS-107. SHI/RDM is the primary payload of the research mission, with experiments ranging from material sciences to life sciences (many rats). Also part of the payload is the Fast Reaction Experiments Enabling Science, Technology, Applications and Research (FREESTAR) that incorporates eight high priority secondary attached shuttle experiments. STS-107 is scheduled to launch July 19, 2002
Boev, B V; Lobanov, A V; Khudobin, V V
2008-01-01
Features of louse-borne typhus in Russia in the middle of 20th century are considered. Study of the infection source, blood serum in patient after epidemic louse-borne typhus (ELBT) and agent (louse) was performed on territory with high morbidity of pediculosis and ELBT in the years of 2nd world war. New materials of seroimmunological examinations are represented. Priority data of lice morphology based on morphometrical data of lice, collected in Russia and world collection in Berlin are shown. Methods of ELBT prediction are given, special attention is paid to development of mathematic prognostic models based on new technologies.
Global Sustainable Development priorities 500 y after Luther: Sola schola et sanitate
Lutz, Wolfgang
2017-01-01
Martin Luther succinctly summarized his theology in sola statements, such as sola scriptura, viewing the Bible (scriptura) as the only valid source of information about God rather than what he viewed as the extraneous, corrupting church doctrine of the time. As a secular side effect of this focus on individual reading skills, the Protestant territories were the first to acquire high literacy rates, which subsequently fostered health, economic growth, and good governance. Here I argue that a similar priority focus on empowerment of all segments of all populations through education and health (sola schola et sanitate) is needed today for sustainable development. According to decades of research, education and health are essential prerequisites for ending poverty and hunger, for improving institutions and participation in society, for voluntary fertility declines and ending world population growth, for changing behavior and adoption of new and clean technologies, and for enhancing adaptive capacity to already unavoidable climate change. This approach avoids paternalistic imposition of development policies by focusing external aid on enabling people to help themselves, their families, and communities. Prioritizing education and health also helps move more industrialized, aging societies from a focus on material consumption to one on quality of life. Sola schola et sanitate suggests that well-being will increasingly be based on health, continued mental stimulation, and consumption of cultural products, rather than fossil fuels and materials. Thus, cognition—or brain power—can be viewed as the zero-emissions energy for sustainable development. PMID:28630291
Global Sustainable Development priorities 500 y after Luther: Sola schola et sanitate.
Lutz, Wolfgang
2017-07-03
Martin Luther succinctly summarized his theology in sola statements, such as sola scriptura , viewing the Bible ( scriptura ) as the only valid source of information about God rather than what he viewed as the extraneous, corrupting church doctrine of the time. As a secular side effect of this focus on individual reading skills, the Protestant territories were the first to acquire high literacy rates, which subsequently fostered health, economic growth, and good governance. Here I argue that a similar priority focus on empowerment of all segments of all populations through education and health ( sola schola et sanitate ) is needed today for sustainable development. According to decades of research, education and health are essential prerequisites for ending poverty and hunger, for improving institutions and participation in society, for voluntary fertility declines and ending world population growth, for changing behavior and adoption of new and clean technologies, and for enhancing adaptive capacity to already unavoidable climate change. This approach avoids paternalistic imposition of development policies by focusing external aid on enabling people to help themselves, their families, and communities. Prioritizing education and health also helps move more industrialized, aging societies from a focus on material consumption to one on quality of life. Sola schola et sanitate suggests that well-being will increasingly be based on health, continued mental stimulation, and consumption of cultural products, rather than fossil fuels and materials. Thus, cognition-or brain power-can be viewed as the zero-emissions energy for sustainable development.
Holmes, George; Scholfield, Katherine; Brockington, Dan
2012-08-01
In recent decades, various conservation organizations have developed models to prioritize locations for conservation. Through a survey of the spending patterns of 281 conservation nongovernmental organizations (NGOs), we examined the relation between 2 such models and spatial patterns of spending by conservation NGOs in 44 countries in sub-Saharan Africa. We tested whether, at the country level, the proportion of a country designated as a conservation priority was correlated with where NGOs spent money. For one model (the combination of Conservation International's hotspots and High Biodiversity Wilderness Areas, which are areas of high endemism with high or low levels of vegetation loss respectively), there was no relation between the proportion of a country designated as a priority and levels of NGO spending, including by the NGO associated with the model. In the second model (Global 200), the proportion of a country designated as a priority and the amount of money spent by NGOs were significantly and positively related. Less money was spent in countries in northern and western sub-Saharan Africa than countries in southern and eastern Africa, relative to the proportion of the country designated as a conservation priority. We suggest that on the basis of our results some NGOs consider increasing their spending on the areas designated as of conservation priority which are currently relatively underfunded, although there are economic, political, cultural, historical, biological, and practical reasons why current spending patterns may not align with priority sites. ©2012 Society for Conservation Biology.
Dental amalgam and mercury vapor release.
Osborne, J W
1992-09-01
Dental diseases are among the most common ailments, and dentists in the United States spend over 50% of their time in dental practice rebuilding carious, malformed, and traumatically injured teeth. It is logical, therefore, that the majority of the dental school curriculum is devoted to the diagnosis, prevention, and treatment of teeth with anomalies. Dentists have several choices of materials they can use to accomplish the task of rebuilding teeth. Besides amalgam, they have ceramic materials, resin composites, base-metal and noble casting alloys, and glass-ionomer cements to use to restore the posterior dentition. Each of these restorative materials has advantages and disadvantages, and the clinical judgment as to when a particular material should be used is given a high priority in dental education. Amalgam is the most widely used of these restorative materials, with 92% of dentists listing it as the material of choice in the posterior of the mouth (Clinical Research Associates, 1990). Dentists have been placing amalgams for over 150 years in the US. They placed 150 million last year, which represents over 75 tons of amalgam alloy. The reasons that dentists use this restorative material so frequently are its durability, ease of manipulation, and low cost. Numerous clinical studies have been conducted on the serviceability of amalgam. Most of these have been on the old, low-copper alloys, and results indicate that they last from 8 to 15 years (Bailit et al., 1979; Osborne et al., 1980; Qvist et al., 1986). In the past 20 years, vast improvements have been made in amalgams with the development of the high-copper systems.(ABSTRACT TRUNCATED AT 250 WORDS)
Prioritizing pesticide compounds for analytical methods development
Norman, Julia E.; Kuivila, Kathryn; Nowell, Lisa H.
2012-01-01
The U.S. Geological Survey (USGS) has a periodic need to re-evaluate pesticide compounds in terms of priorities for inclusion in monitoring and studies and, thus, must also assess the current analytical capabilities for pesticide detection. To meet this need, a strategy has been developed to prioritize pesticides and degradates for analytical methods development. Screening procedures were developed to separately prioritize pesticide compounds in water and sediment. The procedures evaluate pesticide compounds in existing USGS analytical methods for water and sediment and compounds for which recent agricultural-use information was available. Measured occurrence (detection frequency and concentrations) in water and sediment, predicted concentrations in water and predicted likelihood of occurrence in sediment, potential toxicity to aquatic life or humans, and priorities of other agencies or organizations, regulatory or otherwise, were considered. Several existing strategies for prioritizing chemicals for various purposes were reviewed, including those that identify and prioritize persistent, bioaccumulative, and toxic compounds, and those that determine candidates for future regulation of drinking-water contaminants. The systematic procedures developed and used in this study rely on concepts common to many previously established strategies. The evaluation of pesticide compounds resulted in the classification of compounds into three groups: Tier 1 for high priority compounds, Tier 2 for moderate priority compounds, and Tier 3 for low priority compounds. For water, a total of 247 pesticide compounds were classified as Tier 1 and, thus, are high priority for inclusion in analytical methods for monitoring and studies. Of these, about three-quarters are included in some USGS analytical method; however, many of these compounds are included on research methods that are expensive and for which there are few data on environmental samples. The remaining quarter of Tier 1 compounds are high priority as new analytes. The objective for analytical methods development is to design an integrated analytical strategy that includes as many of the Tier 1 pesticide compounds as possible in a relatively few, cost-effective methods. More than 60 percent of the Tier 1 compounds are high priority because they are anticipated to be present at concentrations approaching levels that could be of concern to human health or aquatic life in surface water or groundwater. An additional 17 percent of Tier 1 compounds were frequently detected in monitoring studies, but either were not measured at levels potentially relevant to humans or aquatic organisms, or do not have benchmarks available with which to compare concentrations. The remaining 21 percent are pesticide degradates that were included because their parent pesticides were in Tier 1. Tier 1 pesticide compounds for water span all major pesticide use groups and a diverse range of chemical classes, with herbicides and their degradates composing half of compounds. Many of the high priority pesticide compounds also are in several national regulatory programs for water, including those that are regulated in drinking water by the U.S. Environmental Protection Agency under the Safe Drinking Water Act and those that are on the latest Contaminant Candidate List. For sediment, a total of 175 pesticide compounds were classified as Tier 1 and, thus, are high priority for inclusion in analytical methods available for monitoring and studies. More than 60 percent of these compounds are included in some USGS analytical method; however, some are spread across several research methods that are expensive to perform, and monitoring data are not extensive for many compounds. The remaining Tier 1 compounds for sediment are high priority as new analytes. The objective for analytical methods development for sediment is to enhance an existing analytical method that currently includes nearly half of the pesticide compounds in Tier 1 by adding as many additional Tier 1 compounds as are analytically compatible. About 35 percent of the Tier 1 compounds for sediment are high priority on the basis of measured occurrence. A total of 74 compounds, or 42 percent, are high priority on the basis of predicted likelihood of occurrence according to physical-chemical properties, and either have potential toxicity to aquatic life, high pesticide useage, or both. The remaining 22 percent of Tier 1 pesticide compounds were either degradates of Tier 1 parent compounds or included for other reasons. As with water, the Tier 1 pesticide compounds for sediment are distributed across the major pesticide-use groups; insecticides and their degradates are the largest fraction, making up 45 percent of Tier 1. In contrast to water, organochlorines, at 17 percent, are the largest chemical class for Tier 1 in sediment, which is to be expected because there is continued widespread detection in sediments of persistent organochlorine pesticides and their degradates at concentrations high enough for potential effects on aquatic life. Compared to water, there are fewer available benchmarks with which to compare contaminant concentrations in sediment, but a total of 19 Tier 1 compounds have at least one sediment benchmark or screening value for aquatic organisms. Of the 175 compounds in Tier 1, 77 percent have high aquatic-life toxicity, as defined for this process. This evaluation of pesticides and degradates resulted in two lists of compounds that are priorities for USGS analytical methods development, one for water and one for sediment. These lists will be used as the basis for redesigning and enhancing USGS analytical capabilities for pesticides in order to capture as many high-priority pesticide compounds as possible using an economically feasible approach.
40 CFR Appendix E to Part 300 - Oil Spill Response
Code of Federal Regulations, 2010 CFR
2010-07-01
..., other waters of the high seas subject to the NCP, and the land surface or land substrata, ground waters... response equipment; and a district response advisory team. Contiguous zone means the zone of the high seas... of the discharge. 2.2Priorities. (a) Safety of human life must be given the highest priority during...
State Strategies to Improve Low-Performing Schools: California's High Priority School Grants Program
ERIC Educational Resources Information Center
Timar, Thomas; Rodriguez, Gloria; Simon, Virginia Adams; Ferrario, Kim; Kim, Kris
2006-01-01
Central to California's school accountability system are programs to engage low-performing schools in improvement efforts. One of these is the High Priority Schools Program (HPSGP), created by Assembly Bill 961 (Chapter 747, "Statutes of 2001") to provide funds to the lowest performing schools in the state. To be eligible for funding,…
Brian W. Smith; Dean Demarest; Ed. Laurent
2010-01-01
The Appalachian Mountains Joint Venture (AMJV) is a self-directed, nonregulatory bird conservation partnership with the mission of restoring and sustaining native bird populations and their habitats throughout Appalachia. In 2008, the AMJV formed an ad hoc "high-elevation" technical working group to identify and address conservation priorities of bird species...
Few Americans Receive All High-Priority, Appropriate Clinical Preventive Services.
Borsky, Amanda; Zhan, Chunliu; Miller, Therese; Ngo-Metzger, Quyen; Bierman, Arlene S; Meyers, David
2018-06-01
As of 2015, only 8 percent of US adults ages thirty-five and older had received all of the high-priority, appropriate clinical preventive services recommended for them. Nearly 5 percent of adults did not receive any such services. Further delivery system-level efforts are needed to increase the use of preventive services.
On September 23 and 24, 2014, EPA hosted a forum to “harness the collective power of the electronics community and identify shared priorities that will advance domestic end-of-life electronics management.
Exploring end of life priorities in Saudi males: usefulness of Q-methodology.
Hammami, Muhammad M; Al Gaai, Eman; Hammami, Safa; Attala, Sahar
2015-11-26
Quality end-of-life care depends on understanding patients' end-of-life choices. Individuals and cultures may hold end-of-life priorities at different hierarchy. Forced ranking rather than independent rating, and by-person factor analysis rather than averaging may reveal otherwise masked typologies. We explored Saudi males' forced-ranked, end-of-life priorities and dis-priorities. Respondents (n = 120) rank-ordered 47 opinion statements on end-of-life care following a 9-category symmetrical distribution. Statements' scores were analyzed by averaging analysis and factor analysis (Q-methodology). Respondents' mean age was 32.1 years (range, 18-65); 52% reported average religiosity, 88 and 83% ≥ very good health and life-quality, respectively, and 100% ≥ high school education. Averaging analysis revealed that the extreme five end-of-life priorities were to, be at peace with God, be able to say the statement of faith, maintain dignity, resolve conflicts, and have religious death rituals respected, respectively. The extreme five dis-priorities were to, die in the hospital, not receive intensive care if in coma, die at peak of life, be informed about impending death by family/friends rather than doctor, and keep medical status confidential from family/friends, respectively. Q-methodology classified 67% of respondents into five highly transcendent opinion types. Type-I (rituals-averse, family-caring, monitoring-coping, life-quality-concerned) and Type-V (rituals-apt, family-centered, neutral-coping, life-quantity-concerned) reported the lowest and highest religiosity, respectively. Type-II (rituals-apt, family-dependent, monitoring-coping, life-quantity-concerned) and Type-III (rituals-silent, self/family-neutral, avoidance-coping, life-quality & quantity-concerned) reported the best and worst life-quality, respectively. Type-I respondents were the oldest with the lowest general health, in contrast to Type-IV (rituals-apt, self-centered, monitoring-coping, life-quality/quantity-neutral). Of the extreme 14 priorities/dis-priorities for the five types, 29, 14, 14, 50, and 36%, respectively, were not among the extreme 20 priorities/dis-priorities identified by averaging analysis for the entire cohort. 1) Transcendence was the extreme end-of-life priority, and dying in the hospital was the extreme dis-priority. 2) Quality of life was conceptualized differently with less emphasize on its physiological aspects. 3) Disclosure of terminal illness to family/close friends was preferred as long it is through the patient. 4) Q-methodology identified five types of constellations of end-of-life priorities and dis-priorities that may be related to respondents' demographics and are partially masked by averaging analysis.
Nash, J. Thomas
1999-01-01
Field observations, sampling of mine dumps and mine drainage waters, and laboratory studies of dump materials have been made at mining areas deemed to be on public lands administered by the U. S. Bureau of Land Management (BLM) in the Upper Animas River watershed. Results of chemical analyses of dump materials, leachates of those materials, and surface waters draining mines or dumps provide indications of where acid is generated or consumed, and metal concentrations below mines or dumps. Information on sites previously identified as needing reclamation is reviewed and available geochemical information is used to rank 26 sites into four classes of priority for reclamation. Although there are more than a thousand mining sites (productive mines and prospects) on BLM lands in the Upper Animas River watershed study area, the majority are very small (less than about 70 cubic yards of dump material), are more than 2 miles from a major stream, or so inaccessible as to prohibit reclamation. In the summers of 1997 and 1998 approximately 200 sites were observed and more than 100 of these that appeared to have the potential to geochemically impact the watershed were examined more carefully and sampled. Building upon the prior work of the BLM and associated agencies, this work attempted to identify the most significant sources of mine-related contamination and to rank those sites as to priority for reclamation. These most significant mining areas have been examined within a geologic framework and were evaluated by multiple criteria, including tendency to generate acid and release toxic metals, observed damage to vegetation, potential to release metals based on leach tests, and likelihood of transport into streams of the watershed. No single measurable parameter, such as metal concentration, can be used to rank the sites. Rather, subjective estimates are required to evaluate combinations or interactions among several parameters. The most subjective estimate, while ranking feasibility of reclamation, is the relative amounts of naturally occurring metals and acidity and mine-related contamination at each mining area. Mitigation of natural contributions at mines or unmined areas is beyond the scope of my studies, but should be considered when planning reclamation. Available information for the 26 priority sites is adequate for ranking, but at some sites additional information on groundwater conditions is needed for a more complete site evaluation.
Implementation of IAU Resolution 2009 B5, "in Defence of the night sky and the right to starlight"
NASA Astrophysics Data System (ADS)
Green, Richard F.; Walker, Constance Elaine
2015-08-01
IAU Resolution 2009 B5 calls on IAU members to protect the public`s right to an unpolluted night sky as well as the astronomical quality of the sky around major research observatories. The approach of Commission 50 - astronomical site protection - includes working with the lighting industry for appropriate products from rapidly evolving solid state technology, arming astronomers with training and materials for presentation, selective endorsement of key protection issues, cooperation with other IAU commissions for education and outreach with particular current attention to the International Year of Light, and provision of clear quantitative priorities for outdoor lighting standards. In 2012, these priorities were defined as full cut-off shielding, spectral management to minimize output shortward of 500 nm, and zone- and time-appropriate lighting levels. Revisiting the specifics of these priorities will be a topic for current discussion.
Classification of factors of development of transport infrastructure in the region
NASA Astrophysics Data System (ADS)
Karpovich, Oleg; Shlafman, Alexander
2017-10-01
The formation of a unified strategy for the development of the transport infrastructure of the region is considered to be the basic direction of the developing the whole territory The article is devoted to determining priorities in the implementation of programs of redevelopment of the regional plants. The submission suggested authors the characteristics of a grouping of theoretical and practical approaches to spatial reorganization of production. The result of this research, the specific recommendations on the application of redevelopment for the development of industrial areas. The organization of economic relations within the eastern regions of the Russian Federation, as well as the implementation of economic activities involving the transit and processing of a multitude of material and intangible flows on their territory, is a priority task of the state policy of smoothing the development of the regions of the country. To solve these macroeconomic problems, the transport infrastructure of the region has a priority.
Clay minerals in primitive meteorites and interplanetary dust 1
NASA Technical Reports Server (NTRS)
Zolensky, M. E.; Keller, L. P.
1991-01-01
Many meteorites and interplanetary dust particles (IDPs) with primitive compositions contain significant amounts of phyllosilicate minerals, which are generally interpreted as evidence of protoplanetary aqueous alteration at an early period of the solar system. These meteorites are chondrites (near solar composition) of the carbonaceous and ordinary varieties. The former are subdivided (according to bulk composition and petrology) into CI, CM, CV, CO, CR, and ungrouped classes. IDPs are extraterrestrial particulates, collected in stratosphere, which have chemical compositions indicative of a primitive origin; they are typically distinct from the primitive meteorites. Characterization of phyllosilicates in these materials is a high priority because of the important physico-chemical information they hold. The most common phyllosilicates present in chondritic extraterrestrial materials are serpentine-group minerals, smectites, and micas. We discuss these phyllosilicates and describe the interpretation of their occurrence in meteorites and IDPs and what this indicates about history of their parent bodies, which are probably the hydrous asteroids.
Materialistic Values and Goals.
Kasser, Tim
2016-01-01
Materialism comprises a set of values and goals focused on wealth, possessions, image, and status. These aims are a fundamental aspect of the human value/goal system, standing in relative conflict with aims concerning the well-being of others, as well as one's own personal and spiritual growth. Substantial evidence shows that people who place a relatively high priority on materialistic values/goals consume more products and incur more debt, have lower-quality interpersonal relationships, act in more ecologically destructive ways, have adverse work and educational motivation, and report lower personal and physical well-being. Experimentally activating materialistic aims causes similar outcomes. Given these ills, researchers have investigated means of decreasing people's materialism. Successful interventions encourage intrinsic/self-transcendent values/goals, increase felt personal security, and/or block materialistic messages from the environment. These interventions would likely be more effective if policies were also adopted that diminished contemporary culture's focus on consumption, profit, and economic growth.
Hochreiter, Joseph J.
1982-01-01
This report presents chemical-quality data collected from May 1980 to January 1981 at several locations within the Delaware River estuary and selected New Jersey tributaries. Samples of surface water were analyzed Environmental Protection Agency ' priority pollutants, ' including acid extractable, base/neutral extractable and volatile organic compounds, in addition to selected dissolved inorganic constituents. Surficial bed material at selected locations was examined for trace metals, insecticides, polychlorinated biphenyls, and base/neutral extractable organic compounds. Trace levels (1-50 micrograms per liter) of purgeable organic compounds, particularly those associated with the occurrence of hydrocarbons, were found in about 60% of the water samples taken. DDT, DDD, DDE, PCB 's and chlordane are present in most surficial bed material samples. Diazinon was the only organophosphorous insecticide detected in the study (1.6 micrograms per kilogram at one location). High values for select trace metals in bed material were discovered at two locations. Of the 10 sites sampled, the surficial bed material containing the most contamination was found along one cross section of Raccoon Creek at Bridgeport. An additional analysis of Raccoon Creek revealed bed material containing toluene, oil and grease, and trace quantities of 15 base/neutral extractable organic compounds, including polynuclear aromatic hydrocarbons, phthalate esters, and chlorinated benzenes.
NASA Astrophysics Data System (ADS)
Antonella Dino, Giovanna; Willy Danielsen, Svein; Chiappino, Claudia; Primavori, Piero; Engelsen, Christian John
2016-04-01
Resource preservation is one of the main challenges in Europe, together with waste management and recycling; recently several researchers are interested in the recovering of critical raw materials and secondary raw materials from landfill. Aggregate supply, even if it is not "critical" sensus stricto (s.s.), is one of the European priorities (low value but high volume needs). On the other side, the management of quarry waste , mainly from dimension stones, but also as fines from aggregate crushing, is still a matter of concern. Such materials are managed in different ways both locally and nationwide, and often they are landfilled, because of an unclear legislation and a general lack of data. Most of time the local authorities adopt the maximum precaution principle or the enterprises find it little profitable to recover them, so that the sustainable recycling of such material is not valued. Several studies have shown, depending on the material specific characteristics, the viability of recycling quarry waste into new raw materials used in glass and ceramic industries, precast concrete production, infrastructures etc. (Loudes et al. 2012, Dino&Marian 2015, Bozzola et al 2012, Dino et al. 2012, etc.). Thus, aggregate production may be one of the profitable ways to use quarry waste and is falling under the priority of EU (aggregate supply). Positive economic and environmental effects are likely to be achieved by systematic recycling of quarry waste planned by industries (industrial planning) and public authorities (national and local planning of aggregate exploitation). Today, the recycling level varies to a great extent and systematic recovery is not common among European Countries. In Italy and Norway no significant incentives on recycling or systematic approaches for local aggregate exploitation exist. The environmental consequences can be overexploitation of the natural resources, land take for the landfills, environmental contamination and landscape alteration by the quarry waste heaps. The environmentally sustainable management of quarry waste, which aims to recover and recycle both clean and contaminated materials, would therefore help to reduce the pressure on natural resources, reduce the land take and the environmental contamination. The present paper shows the main challenges connected to quarry waste management, focusing on several possibilities for quarry waste recovering, in order to produce recycled aggregates.
Perry, D C; Wright, J G; Cooke, S; Roposch, A; Gaston, M S; Nicolaou, N; Theologis, T
2018-05-01
Aims High-quality clinical research in children's orthopaedic surgery has lagged behind other surgical subspecialties. This study used a consensus-based approach to identify research priorities for clinical trials in children's orthopaedics. Methods A modified Delphi technique was used, which involved an initial scoping survey, a two-round Delphi process and an expert panel formed of members of the British Society of Children's Orthopaedic Surgery. The survey was conducted amongst orthopaedic surgeons treating children in the United Kingdom and Ireland. Results A total of 86 clinicians contributed to both rounds of the Delphi process, scoring priorities from one (low priority) to five (high priority). Elective topics were ranked higher than those relating to trauma, with the top ten elective research questions scoring higher than the top question for trauma. Ten elective, and five trauma research priorities were identified, with the three highest ranked questions relating to the treatment of slipped capital femoral epiphysis (mean score 4.6/ 5), Perthes' disease (4.5) and bone infection (4.5). Conclusion This consensus-based research agenda will guide surgeons, academics and funders to improve the evidence in children's orthopaedic surgery and encourage the development of multicentre clinical trials. Cite this article: Bone Joint J 2018;100-B:680-4.
Binge Eating among Women Veterans in Primary Care: Comorbidities and Treatment Priorities.
Rosenbaum, Diane L; Kimerling, Rachel; Pomernacki, Alyssa; Goldstein, Karen M; Yano, Elizabeth M; Sadler, Anne G; Carney, Diane; Bastian, Lori A; Bean-Mayberry, Bevanne A; Frayne, Susan M
2016-01-01
Little is known about the clinical profile and treatment priorities of women with binge eating disorder (BED), a diagnosis new to the fifth edition of Diagnostic and Statistical Manual of Mental Disorders. We identified comorbidities and patients' treatment priorities, because these may inform implementation of clinical services. Data were collected from women veteran primary care patients. Analyses compared those who screened positive for BED (BED+), and those without any binge eating symptoms (BED-). Frequencies of comorbid medical and psychological disorders were high in the BED+ group. The BED+ group's self-identified most common treatment priorities were mood concerns (72.2%), weight loss (66.7%), and body image/food issues (50%). Among those with obesity, a greater proportion of the BED+ group indicated body image/food issues was their top treatment priority (12.9% vs. 2.8%; p < .01), suggesting that these patients may be more apt to seek treatment beyond weight management for their problematic eating patterns. Women primary care patients with BED demonstrate high medical and psychological complexity; their subjective treatment priorities often match objective needs. These findings may inform the development of targeted BED screening practices for women with obesity in primary care settings, and the eventual adoption of patient-centered BED treatment resources. Published by Elsevier Inc.
Biodiversity hotspots house most undiscovered plant species.
Joppa, Lucas N; Roberts, David L; Myers, Norman; Pimm, Stuart L
2011-08-09
For most organisms, the number of described species considerably underestimates how many exist. This is itself a problem and causes secondary complications given present high rates of species extinction. Known numbers of flowering plants form the basis of biodiversity "hotspots"--places where high levels of endemism and habitat loss coincide to produce high extinction rates. How different would conservation priorities be if the catalog were complete? Approximately 15% more species of flowering plant are likely still undiscovered. They are almost certainly rare, and depending on where they live, suffer high risks of extinction from habitat loss and global climate disruption. By using a model that incorporates taxonomic effort over time, regions predicted to contain large numbers of undiscovered species are already conservation priorities. Our results leave global conservation priorities more or less intact, but suggest considerably higher levels of species imperilment than previously acknowledged.
Future Research Priorities for Morbidity Control of Lymphedema.
Narahari, S R; Aggithaya, Madhur Guruprasad; Moffatt, Christine; Ryan, T J; Keeley, Vaughan; Vijaya, B; Rajendran, P; Karalam, S B; Rajagopala, S; Kumar, N K; Bose, K S; Sushma, K V
2017-01-01
Innovation in the treatment of lower extremity lymphedema has received low priority from the governments and pharmaceutical industry. Advancing lymphedema is irreversible and initiates fibrosis in the dermis, reactive changes in the epidermis and subcutis. Most medical treatments offered for lymphedema are either too demanding with a less than satisfactory response or patients have low concordance due to complex schedules. A priority setting partnership (PSP) was established to decide on the future priorities in lymphedema research. A table of abstracts following a literature search was published in workshop website. Stake holders were requested to upload their priorities. Their questions were listed, randomized, and sent to lymphologists for ranking. High ranked ten research priorities, obtained through median score, were presented in final prioritization work shop attended by invited stake holders. A free medical camp was organized during workshop to understand patients' priorities. One hundred research priorities were selected from priorities uploaded to website. Ten priorities were short listed through a peer review process involving 12 lymphologists, for final discussion. They were related to simplification of integrative treatment for lymphedema, cellular changes in lymphedema and mechanisms of its reversal, eliminating bacterial entry lesions to reduce cellulitis episodes, exploring evidence for therapies in traditional medicine, improving patient concordance to compression therapy, epidemiology of lymphatic filariasis (LF), and economic benefit of integrative treatments of lymphedema. A robust research priority setting process, organized as described in James Lind Alliance guidebook, identified seven priority areas to achieve effective morbidity control of lymphedema including LF. All stake holders including Department of Health Research, Government of India, participated in the PSP.
Future Research Priorities for Morbidity Control of Lymphedema
Narahari, S R; Aggithaya, Madhur Guruprasad; Moffatt, Christine; Ryan, T J; Keeley, Vaughan; Vijaya, B; Rajendran, P; Karalam, S B; Rajagopala, S; Kumar, N K; Bose, K S; Sushma, K V
2017-01-01
Background: Innovation in the treatment of lower extremity lymphedema has received low priority from the governments and pharmaceutical industry. Advancing lymphedema is irreversible and initiates fibrosis in the dermis, reactive changes in the epidermis and subcutis. Most medical treatments offered for lymphedema are either too demanding with a less than satisfactory response or patients have low concordance due to complex schedules. A priority setting partnership (PSP) was established to decide on the future priorities in lymphedema research. Methods: A table of abstracts following a literature search was published in workshop website. Stake holders were requested to upload their priorities. Their questions were listed, randomized, and sent to lymphologists for ranking. High ranked ten research priorities, obtained through median score, were presented in final prioritization work shop attended by invited stake holders. A free medical camp was organized during workshop to understand patients’ priorities. Results: One hundred research priorities were selected from priorities uploaded to website. Ten priorities were short listed through a peer review process involving 12 lymphologists, for final discussion. They were related to simplification of integrative treatment for lymphedema, cellular changes in lymphedema and mechanisms of its reversal, eliminating bacterial entry lesions to reduce cellulitis episodes, exploring evidence for therapies in traditional medicine, improving patient concordance to compression therapy, epidemiology of lymphatic filariasis (LF), and economic benefit of integrative treatments of lymphedema. Conclusion: A robust research priority setting process, organized as described in James Lind Alliance guidebook, identified seven priority areas to achieve effective morbidity control of lymphedema including LF. All stake holders including Department of Health Research, Government of India, participated in the PSP. PMID:28216723
Integrating economic costs and biological traits into global conservation priorities for carnivores.
Loyola, Rafael Dias; Oliveira-Santos, Luiz Gustavo Rodrigues; Almeida-Neto, Mário; Nogueira, Denise Martins; Kubota, Umberto; Diniz-Filho, José Alexandre Felizola; Lewinsohn, Thomas Michael
2009-08-27
Prioritization schemes usually highlight species-rich areas, where many species are at imminent risk of extinction. To be ecologically relevant these schemes should also include species biological traits into area-setting methods. Furthermore, in a world of limited funds for conservation, conservation action is constrained by land acquisition costs. Hence, including economic costs into conservation priorities can substantially improve their conservation cost-effectiveness. We examined four global conservation scenarios for carnivores based on the joint mapping of economic costs and species biological traits. These scenarios identify the most cost-effective priority sets of ecoregions, indicating best investment opportunities for safeguarding every carnivore species, and also establish priority sets that can maximize species representation in areas harboring highly vulnerable species. We compared these results with a scenario that minimizes the total number of ecoregions required for conserving all species, irrespective of other factors. We found that cost-effective conservation investments should focus on 41 ecoregions highlighted in the scenario that consider simultaneously both ecoregion vulnerability and economic costs of land acquisition. Ecoregions included in priority sets under these criteria should yield best returns of investments since they harbor species with high extinction risk and have lower mean land cost. Our study highlights ecoregions of particular importance for the conservation of the world's carnivores defining global conservation priorities in analyses that encompass socioeconomic and life-history factors. We consider the identification of a comprehensive priority-set of areas as a first step towards an in-situ biodiversity maintenance strategy.
CEOs and CFOs express concern about materials management.
Kowalski, J C
1998-05-01
In a recent survey, CEOs and CFOs expressed concern regarding the effectiveness of their materials management departments. Both groups of executives would like to see more improvement in their materials managers' supply expense reduction efforts and leadership skills. More than a third of CFOs are even considering outsourcing the materials management function. Both CEOs and CFOs did admit, however, they needed to learn more about materials management, and both groups of executives could lend their authority to materials management programs to ensure their success. CEOs and CFOs need to reach consensus regard materials management priorities, performance levels, and professional characteristics and desired skills. They also should hold materials managers accountable for operations they can and should be managing by using performance-based compensation.
Top 40 Priorities for Science to Inform US Conservation and Management Policy
We present a list of America's "Top 40" high-priority questions that, if answered, would help inform some of the most important current and future decisions about resource management in the United States
DOT National Transportation Integrated Search
2011-01-01
Developing computer models of land use and : integrated transportation-land use are high : priorities for Florida transportation planners. : Land use information is fundamental to siting : roadways, signaling, setting maintenance : priorities, routin...
DOE Office of Scientific and Technical Information (OSTI.GOV)
V.I. Rudyka; Y.E. Zingerman; V.V. Grabko
Recent trends in the design of chemical equipment at coke plants are described, through the lens of experience at Giprokoks. The main priorities were to improve the removal of impurities from coke oven gas; to improve equipment design on the basis of new materials; to reduce reagent consumption; to reduce the materials and energy consumed in the construction of new equipment; and to minimize impacts on the environment and worker health. Some technological equipment is briefly characterized.
ERIC Educational Resources Information Center
Gessaman, Paul H.
This packet contains student materials and an instructor's guide for use in a series of workshops on the "GOALS Process" for persons in manufacturing businesses (often family-owned). The materials provide a framework for individual or family use in self-assessment and a means of identifying business and family life goals, setting priorities, and…
ERIC Educational Resources Information Center
Gessaman, Paul H.
This packet contains student materials and an instructor's guide for use in a series of workshops on the "GOALS Process" for persons in service-producing businesses (often family-owned). The materials provide a framework for individual or family use in self-assessment and a means of identifying business and family life goals, setting priorities,…
V Soares Maciel, Edvaldo; de Toffoli, Ana Lúcia; Lanças, Fernando Mauro
2018-04-20
The accelerated rising of the world's population increased the consumption of food, thus demanding more rigors in the control of residue and contaminants in food-based products marketed for human consumption. In view of the complexity of most food matrices, including fruits, vegetables, different types of meat, beverages, among others, a sample preparation step is important to provide more reliable results when combined with HPLC separations. An adequate sample preparation step before the chromatographic analysis is mandatory in obtaining higher precision and accuracy in order to improve the extraction of the target analytes, one of the priorities in analytical chemistry. The recent discovery of new materials such as ionic liquids, graphene-derived materials, molecularly imprinted polymers, restricted access media, magnetic nanoparticles, and carbonaceous nanomaterials, provided high sensitivity and selectivity results in an extensive variety of applications. These materials, as well as their several possible combinations, have been demonstrated to be highly appropriate for the extraction of different analytes in complex samples such as food products. The main characteristics and application of these new materials in food analysis will be presented and discussed in this paper. Another topic discussed in this review covers the main advantages and limitations of sample preparation microtechniques, as well as their off-line and on-line combination with HPLC for food analysis. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Metrics and experimental data for assessing unbalanced disassembly lines.
DOT National Transportation Integrated Search
2011-01-01
Disassembly lines are inherently multi-criteria, with balance having the possibility of : being one of the lower priorities. This is due to the fact that other criteria for example, : removing valuable or hazardous materials early on in the proce...
Code of Federal Regulations, 2010 CFR
2010-10-01
... 3011.602 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY... contractors to acquire products, materials, and services under the Defense Priorities and Allocations System (DPAS) regulations (15 CFR part 700): (1) The U.S. Coast Guard in support of certified national defense...
Code of Federal Regulations, 2011 CFR
2011-10-01
... 3011.602 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY... contractors to acquire products, materials, and services under the Defense Priorities and Allocations System (DPAS) regulations (15 CFR part 700): (1) The U.S. Coast Guard in support of certified national defense...
Code of Federal Regulations, 2012 CFR
2012-10-01
... 3011.602 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY... contractors to acquire products, materials, and services under the Defense Priorities and Allocations System (DPAS) regulations (15 CFR part 700): (1) The U.S. Coast Guard in support of certified national defense...
Code of Federal Regulations, 2014 CFR
2014-10-01
... 3011.602 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY... contractors to acquire products, materials, and services under the Defense Priorities and Allocations System (DPAS) regulations (15 CFR part 700): (1) The U.S. Coast Guard in support of certified national defense...
Code of Federal Regulations, 2013 CFR
2013-10-01
... 3011.602 Federal Acquisition Regulations System DEPARTMENT OF HOMELAND SECURITY, HOMELAND SECURITY... contractors to acquire products, materials, and services under the Defense Priorities and Allocations System (DPAS) regulations (15 CFR part 700): (1) The U.S. Coast Guard in support of certified national defense...
A Study of Professional Nurses' Perceptions of Patient Education.
ERIC Educational Resources Information Center
Marcum, Julie; Ridenour, Maureen; Shaff, Gaye; Hammons, Mary; Taylor, Monica
2002-01-01
Of 124 acute care nurses, 97% felt that patient education was a priority. Inhibiting factors were time, staffing, and patient receptiveness. Enhancers included having time to teach, receiving effective teaching guidance materials, and having access to teaching resources. (SK)
Do People Taking Flu Vaccines Need Them the Most?
Gu, Qian; Sood, Neeraj
2011-01-01
Background A well targeted flu vaccine strategy can ensure that vaccines go to those who are at the highest risk of getting infected if unvaccinated. However, prior research has not explicitly examined the association between the risk of flu infection and vaccination rates. Purpose This study examines the relationship between the risk of flu infection and the probability of getting vaccinated. Methods Nationally representative data from the US and multivariate regression models were used to estimate what individual characteristics are associated with (1) the risk of flu infection when unvaccinated and (2) flu vaccination rates. These results were used to estimate the correlation between the probability of infection and the probability of getting vaccinated. Separate analyses were performed for the general population and the high priority population that is at increased risk of flu related complications. Results We find that the high priority population was more likely to get vaccinated compared to the general population. However, within both the high priority and general populations the risk of flu infection when unvaccinated was negatively correlated with vaccination rates (r = −0.067, p<0.01). This negative association between the risk of infection when unvaccinated and the probability of vaccination was stronger for the high priority population (r = −0.361, p<0.01). Conclusions There is a poor match between those who get flu vaccines and those who have a high risk of flu infection within both the high priority and general populations. Targeting vaccination to people with low socioeconomic status, people who are engaged in unhealthy behaviors, working people, and families with kids will likely improve effectiveness of flu vaccine policy. PMID:22164202
Defining priorities for improving end-of-life care in Canada
Heyland, Daren K.; Cook, Deborah J.; Rocker, Graeme M.; Dodek, Peter M.; Kutsogiannis, Demetrios J.; Skrobik, Yoanna; Jiang, Xuran; Day, Andrew G.; Cohen, S. Robin
2010-01-01
Background High-quality end-of-life care should be the right of every Canadian. The objective of this study was to identify aspects of end-of-life care that are high in priority as targets for improvement using feedback elicited from patients and their families. Methods We conducted a multicentre, cross-sectional survey involving patients with advanced, life-limiting illnesses and their family caregivers. We administered the Canadian Health Care Evaluation Project (CANHELP) questionnaire along with a global rating question to measure satisfaction with end-of-life care. We derived the relative importance of individual questions on the CANHELP questionnaire from their association with a global rating of satisfaction, as determined using Pearson correlation coefficients. To determine high-priority issues, we identified questions that had scores indicating high importance and low satisfaction. Results We approached 471 patients and 255 family members, of whom 363 patients and 193 family members participated, with response rates of 77% for patients and 76% for families. From the perspective of patients, high-priority areas needing improvement were related to feelings of peace, to assessment and treatment of emotional problems, to physician availability and to satisfaction that the physician took a personal interest in them, communicated clearly and consistently, and listened. From the perspective of family members, similar areas were identified as high in priority, along with the additional areas of timely information about the patient’s condition and discussions with the doctor about final location of care and use of end-of-life technology. Interpretation End-of-life care in Canada may be improved for patients and their families by providing better psychological and spiritual support, better planning of care and enhanced relationships with physicians, especially in aspects related to communication and decision-making. PMID:20921249
ERIC Educational Resources Information Center
Blustein, Carly L.; Carter, Erik W.; McMillan, Elise D.
2016-01-01
The expectations of parents can shape the post-school pathways of young people with intellectual and developmental disabilities (IDD). Yet little is known about how parents view the employment prospects and priorities of their sons and daughters after high school. We examined expectations, preferences, and concerns of 1,065 parents of children and…
Job Priorities on Peregrine | High-Performance Computing | NREL
allocation when run with qos=high. Requesting a Node Reservation If you are doing work that requires real scheduler more efficiently plan resources for larger jobs. When projects reach their allocation limit, jobs associated with those projects will run at very low priority, which will ensure that these jobs run only when
High Priority Research Needs for Gestational Diabetes Mellitus
Robinson, Karen A.; Saldanha, Ian J.; Wilson, Lisa M.; Nicholson, Wanda K.
2012-01-01
Abstract Objective Identification of unanswered research questions about the management of gestational diabetes mellitus (GDM) is necessary to focus future research endeavors. We developed a process for elucidating the highest priority research questions on GDM. Methods Using a systematic review on GDM as a starting point, we developed an eight-step process: (1) identification of research gaps, (2) feedback from the review's authors, (3) translation of gaps into researchable questions using population, intervention, comparators, outcomes, setting (PICOS) framework, (4) local institutions' stakeholders' refinement of research questions, (5) national stakeholders' use of Delphi method to develop consensus on the importance of research questions, (6) prioritization of outcomes, (7) conceptual framework, and (8) evaluation. Results We identified 15 high priority research questions for GDM. The research questions focused on medication management of GDM (e.g., various oral agents vs. insulin), delivery management for women with GDM (e.g., induction vs. expectant management), and identification of risk factors for, prevention of, and screening for type 2 diabetes in women with prior GDM. Stakeholders rated the development of chronic diseases in offspring, cesarean delivery, and birth trauma as high priority outcomes to measure in future studies. Conclusions We developed an eight-step process using a multidisciplinary group of stakeholders to identify 15 research questions of high clinical importance. Researchers, policymakers, and funders can use this list to direct research efforts and resources to the highest priority areas to improve care for women with GDM. PMID:22747422
SGO: A fast engine for ab initio atomic structure global optimization by differential evolution
NASA Astrophysics Data System (ADS)
Chen, Zhanghui; Jia, Weile; Jiang, Xiangwei; Li, Shu-Shen; Wang, Lin-Wang
2017-10-01
As the high throughout calculations and material genome approaches become more and more popular in material science, the search for optimal ways to predict atomic global minimum structure is a high research priority. This paper presents a fast method for global search of atomic structures at ab initio level. The structures global optimization (SGO) engine consists of a high-efficiency differential evolution algorithm, accelerated local relaxation methods and a plane-wave density functional theory code running on GPU machines. The purpose is to show what can be achieved by combining the superior algorithms at the different levels of the searching scheme. SGO can search the global-minimum configurations of crystals, two-dimensional materials and quantum clusters without prior symmetry restriction in a relatively short time (half or several hours for systems with less than 25 atoms), thus making such a task a routine calculation. Comparisons with other existing methods such as minima hopping and genetic algorithm are provided. One motivation of our study is to investigate the properties of magnetic systems in different phases. The SGO engine is capable of surveying the local minima surrounding the global minimum, which provides the information for the overall energy landscape of a given system. Using this capability we have found several new configurations for testing systems, explored their energy landscape, and demonstrated that the magnetic moment of metal clusters fluctuates strongly in different local minima.
Guerrero-Suarez, Pablo David; Guerrero-López, Paola; Ortiz-Leon, Abarin; Sosa-Castillo, Haydee Samantha; Velazquez-Gonzalez, Lenny Marlene; Martinez-Anda, Jaime Jesus
2018-06-11
Decompressive craniectomy is an urgent procedure that is increasingly used for treatment of intracranial hypertension. After recovery, reconstruction of the cranial defect is necessary. Cranioplasty is an elective procedure with a high potential for morbidity if care is not taken on different surgical factors such as the material used as the cranial flap. In Latin America, high costs in some materials used in cranioplasty make its use prohibitive for some patients and institutions, and looking for alternatives has become a priority in neurosurgical centers. An autologous bone flap is an excellent option possessing the characteristics of an ideal material for cranioplasty. Nevertheless, its use is associated with high morbidity and flap failure. We report our mono-institutional experience in a 10-year period of a hybrid technique for cranioplasty using an autologous bone flap with titanium plates. Sixty-five patients underwent the technique, with good cosmetic results in 89.2% and success in functional result in 90.8% of patients . No significant statistical differences were found on the timing of the surgery or the location of the cranial defect. We had a 1.5% rate of surgical site infection, less than that reported on previous series. We propose that the hybrid technique of cranioplasty is a safety and effective option for cranial defect reconstruction. Georg Thieme Verlag KG Stuttgart · New York.
Vimal, Ruppert; Pluvinet, Pascal; Sacca, Céline; Mazagol, Pierre-Olivier; Etlicher, Bernard; Thompson, John D
2012-03-01
In this study, we developed a multi-criteria assessment of spatial variability of the vulnerability of three different biodiversity descriptors: sites of high conservation interest by virtue of the presence of rare or remarkable species, extensive areas of high ecological integrity, and landscape diversity in grid cells across an entire region. We assessed vulnerability in relation to (a) direct threats in and around sites to a distance of 2 km associated with intensive agriculture, building and road infrastructure and (b) indirect effects of human population density on a wider scale (50 km). The different combinations of biodiversity and threat indicators allowed us to set differential priorities for biodiversity conservation and assess their spatial variation. For example, with this method we identified sites and grid cells which combined high biodiversity with either high threat values or low threat values for the three different biodiversity indicators. In these two classes the priorities for conservation planning will be different, reduce threat values in the former and restrain any increase in the latter. We also identified low priority sites (low biodiversity with either high or low threats). This procedure thus allows for the integration of a spatial ranking of vulnerability into priority setting for regional conservation planning. Copyright © 2011 Elsevier Ltd. All rights reserved.
Big data privacy protection model based on multi-level trusted system
NASA Astrophysics Data System (ADS)
Zhang, Nan; Liu, Zehua; Han, Hongfeng
2018-05-01
This paper introduces and inherit the multi-level trusted system model that solves the Trojan virus by encrypting the privacy of user data, and achieve the principle: "not to read the high priority hierarchy, not to write the hierarchy with low priority". Thus ensuring that the low-priority data privacy leak does not affect the disclosure of high-priority data privacy. This paper inherits the multi-level trustworthy system model of Trojan horse and divides seven different risk levels. The priority level 1˜7 represent the low to high value of user data privacy, and realize seven kinds of encryption with different execution efficiency Algorithm, the higher the priority, the greater the value of user data privacy, at the expense of efficiency under the premise of choosing a more encrypted encryption algorithm to ensure data security. For enterprises, the price point is determined by the unit equipment users to decide the length of time. The higher the risk sub-group algorithm, the longer the encryption time. The model assumes that users prefer the lower priority encryption algorithm to ensure efficiency. This paper proposes a privacy cost model for each of the seven risk subgroups. Among them, the higher the privacy cost, the higher the priority of the risk sub-group, the higher the price the user needs to pay to ensure the privacy of the data. Furthermore, by introducing the existing pricing model of economics and the human traffic model proposed by this paper and fluctuating with the market demand, this paper improves the price of unit products when the market demand is low. On the other hand, when the market demand increases, the profit of the enterprise will be guaranteed under the guidance of the government by reducing the price per unit of product. Then, this paper introduces the dynamic factors of consumers' mood and age to optimize. At the same time, seven algorithms are selected from symmetric and asymmetric encryption algorithms to define the enterprise costs at different levels. Therefore, the proposed model solves the continuous influence caused by cascading events and ensures that the disclosure of low-level data privacy of users does not affect the high-level data privacy, thus greatly improving the safety of the private information of user.
Priorities for family building among patients and partners seeking treatment for infertility.
Duthie, Elizabeth A; Cooper, Alexandra; Davis, Joseph B; Sandlow, Jay; Schoyer, Katherine D; Strawn, Estil; Flynn, Kathryn E
2017-04-05
Infertility treatment decisions require people to balance multiple priorities. Within couples, partners must also negotiate priorities with one another. In this study, we assessed the family-building priorities of couples prior to their first consultations with a reproductive specialist. Participants were couples who had upcoming first consultations with a reproductive specialist (N = 59 couples (59 women; 59 men)). Prior to the consultation, couples separately completed the Family-Building Priorities Tool, which tasked them with ranking from least to most important 10 factors associated with family building. We describe the highest (top three) and lowest (bottom three) priorities, the alignment of priorities within couples, and test for differences in prioritization between men and women within couples (Wilcoxon signed rank test). Maintaining a close and satisfying relationship with one's partner was ranked as a high priority by majorities of men and women, and in 25% of couples, both partners ranked this factor as their most important priority for family building. Majorities of men and women also ranked building a family in a way that does not make infertility obvious to others as a low priority, and in 27% of couples, both partners ranked this factor as the least important priority for family building. There were also differences within couples that involved either men or women ranking a particular goal more highly than their partners. More women ranked two factors higher than did their partners: 1) that I become a parent one way or another (p = 0.015) and 2) that I have a child in the next year or two (p < 0.001), whereas more men ranked 4 factors higher than their partners: 1) that our child has [woman's] genes (p = 0.025), 2) that our child has [man's] genes (p < 0.001), 3) that I maintain a close relationship with my partner (p = 0.034), and 4) that I avoid side effects from treatment (p < 0.001). Clinicians who support patients in assessing available family-building paths should be aware that: (1) patients balance multiple priorities as a part of, or beside, becoming a parent; and (2) patients and their partners may not be aligned in their prioritization of achieving parenthood. For infertility patients who are in relationships, clinicians should encourage the active participation of both partners as well as frank discussions about each partner's priorities for building their family.
78 FR 19029 - Negotiated Service Agreement
Federal Register 2010, 2011, 2012, 2013, 2014
2013-03-28
... POSTAL REGULATORY COMMISSION [Docket No. CP2013-6; Order No. 1680] Negotiated Service Agreement... applicable,'' and that the Amendment ``will not materially affect the cost coverage'' of the agreement. Id... of the agreement on the average increase in prices of general applicability for ``Priority Mail...
Benefits and challenges of using LCA to advance sustainable wasteand materials management
MSW management can be complex and involve many unit processes that can vary based on needs of urban, rural, and suburbia to safely manage waste and to optimize energy and resource recovery while considering local infrastructure and priorities.
Li, Chunsheng; Ansari, Armin; Etherington, George; Jourdain, Jean-Rene; Kukhta, Boris; Kurihara, Osamu; Lopez, Maria Antonia; Ménétrier, Florence; Alves Dos Reis, Arlene; Solomon, Stephen; Zhang, Jiangfeng; Carr, Zhanat
2016-09-01
Following a radiological or nuclear emergency, first responders and the public may become internally contaminated with radioactive materials, as demonstrated during the Goiânia, Chernobyl and Fukushima accidents. Timely monitoring of the affected populations for potential internal contamination, assessment of radiation dose and the provision of necessary medical treatment are required to minimize the health risks from the contamination. This paper summarizes the guidelines and tools that have been developed, and identifies the gaps and priorities for future projects. © World Health Organisation 2016. All rights reserved. The World Health Organization has granted Oxford University Press permission for the reproduction of this article.
Physics in perspective: Recommendations and program emphases
NASA Technical Reports Server (NTRS)
1972-01-01
Exerpted material from Physics in Perspective, Vol. 1, is presented on recommendations, priorities, and program emphases. The major recommendations are addressed to the Federal Government and support agencies, the physics community, and the educational community, including precollege, undergraduate, and graduate sectors. Approaches to the questions involved in establishing scientific priorities are discussed, and an approach is evolved which is based on the jury rating application of certain criteria to the program elements of a subfield. The question of national support level for the physics enterprise is also considered, and contingency alternatives are suggested such that whatever the level of available support, it may be used with maximum effectiveness.
Materials for Photovoltaic Applications
NASA Astrophysics Data System (ADS)
Dimova-Malinovska, Doriana
Energy priorities are changing nowadays. As mankind will probably have to face energy crisis, factors such as energy independence, energy security, stability of energy supply and the variety of energy sources become much more vital these days. Photovoltaics is exceptional compared to other renewable sources of energy due to its wide opportunity to gain energetic and environmental benefits. An overview of the present state of knowledge of the materials aspects of photovoltaic cells will be given, and new semiconductor materials, including nanomaterials, with potential for application in photovoltaic devices will be identified.
7 CFR 4279.155 - Loan priorities.
Code of Federal Regulations, 2011 CFR
2011-01-01
... natural resource value-added product (2 points). (iii) Occupations. The priority score for occupations... natural disaster or experiencing fundamental structural changes in its economic base (5 points). (iv... for the following: (A) Business that offers high value, specialized products and services that command...
7 CFR 4279.155 - Loan priorities.
Code of Federal Regulations, 2013 CFR
2013-01-01
... natural resource value-added product (2 points). (iii) Occupations. The priority score for occupations... natural disaster or experiencing fundamental structural changes in its economic base (5 points). (iv... for the following: (A) Business that offers high value, specialized products and services that command...
7 CFR 4279.155 - Loan priorities.
Code of Federal Regulations, 2012 CFR
2012-01-01
... natural resource value-added product (2 points). (iii) Occupations. The priority score for occupations... natural disaster or experiencing fundamental structural changes in its economic base (5 points). (iv... for the following: (A) Business that offers high value, specialized products and services that command...
7 CFR 4279.155 - Loan priorities.
Code of Federal Regulations, 2014 CFR
2014-01-01
... natural resource value-added product (2 points). (iii) Occupations. The priority score for occupations... natural disaster or experiencing fundamental structural changes in its economic base (5 points). (iv... for the following: (A) Business that offers high value, specialized products and services that command...
Brownlie, T S; Weir, A M; Tarbotton, I; Morton, J M; Heuer, C; McDougall, S
2011-01-01
To examine attitudes, priorities, and constraints pertaining to herd reproductive management perceived by farmers managing seasonal-calving, pasture-based dairy herds in four regions of New Zealand, and to explore how these varied with demographic and biophysical factors. Key decision makers (KDM) on 133 dairy herds in four dairy regions (Waikato, Taranaki, and north and south Canterbury) were interviewed between May and July 2009. They were asked to provide demographic and biophysical data about the farm, and to rate their attitude in relation to their own personality traits, management issues and priorities, and likely constraints affecting reproductive performance in their herds. Associations between demographic factors and attitudes, priorities and constraints were analysed using univariable and multivariable proportional-odds regression models. Farms in the regions studied in the South Island were larger, had larger herds and more staff than farms in the regions studied in the North Island. The farms in the South Island were more likely to be owned by a corporation, managed by younger people or people who had more education, and the herds were more likely to be fed a higher percentage of supplementary feed. The majority of KDM rated the current genetics, milksolids performance and reproductive performance of their herds as high or very high, and >70% believed that the reproductive performance had remained the same or improved over the preceding 3 years. Despite this, improving reproductive performance was the most highly rated priority for the next 3 years. The constraints considered most likely to have affected reproductive performance in the last 2 years were anoestrous cows, protracted calving periods, and low body condition scores; those considered least likely were artificial breeding and heat detection. Of the variables examined related to attitudes, priorities and likely constraints, there were significant differences between region for 10/40, and with age and occupation of the KDM for 24/40 and 5/40, respectively (p<0.05). The majority of KDM reported the current reproductive performance of their herds to be high or very high, yet rated improving reproductive performance as a very high priority for the next 3 years. Mismatch between perceived and actual performance may result in reduced uptake of extension programmes designed to improve performance, and accurate benchmarking may help increase uptake and engagement. Further work is needed to determine whether the attitudes and perceptions about performance of farmers affect the likelihood of changes in their management behaviour which translate to measurable change in the actual reproductive performance of their herds. The variation in attitude, priorities and perceived constraints among age groups and region indicates that design of extension programmes may need to vary with these demographics.
Do different stakeholder groups share mental health research priorities? A four-arm Delphi study.
Owens, Christabel; Ley, Ann; Aitken, Peter
2008-12-01
Despite considerable investment in research priority setting within diverse fields of healthcare, little is known about the extent to which different stakeholder groups share research priorities. Conflicting priorities may jeopardize stakeholder engagement in research. To identify the research priorities of different stakeholder groups within mental health care and examine the extent and nature of agreement between them. Using a Delphi technique, we conducted parallel consultation processes within four different stakeholder groups. Each group process consisted of three rounds. The study was carried out within a mental health and learning disabilities trust in southern England. Participants were recruited from the following groups: mental health service users (34), informal carers (26), mental health practitioners (35) and service managers (23). There were striking differences between the four groups in respect of their ability and willingness to make priority decisions. These differences notwithstanding, there was considerable overlap in respect of their research interests. All groups identified and attached high importance to issues relating to the promotion of independence, self-esteem and recovery. The quality of in-patient care, the place of psychological therapies and the relationship between physical and mental health also emerged across the board. The confluence of four different stakeholder groups around a number of clear themes is highly encouraging, providing a framework within which to construct a research agenda and suggesting that mental health research can be built on solid partnerships.
Integrating Economic Costs and Biological Traits into Global Conservation Priorities for Carnivores
Loyola, Rafael Dias; Oliveira-Santos, Luiz Gustavo Rodrigues; Almeida-Neto, Mário; Nogueira, Denise Martins; Kubota, Umberto; Diniz-Filho, José Alexandre Felizola; Lewinsohn, Thomas Michael
2009-01-01
Background Prioritization schemes usually highlight species-rich areas, where many species are at imminent risk of extinction. To be ecologically relevant these schemes should also include species biological traits into area-setting methods. Furthermore, in a world of limited funds for conservation, conservation action is constrained by land acquisition costs. Hence, including economic costs into conservation priorities can substantially improve their conservation cost-effectiveness. Methodology/Principal Findings We examined four global conservation scenarios for carnivores based on the joint mapping of economic costs and species biological traits. These scenarios identify the most cost-effective priority sets of ecoregions, indicating best investment opportunities for safeguarding every carnivore species, and also establish priority sets that can maximize species representation in areas harboring highly vulnerable species. We compared these results with a scenario that minimizes the total number of ecoregions required for conserving all species, irrespective of other factors. We found that cost-effective conservation investments should focus on 41 ecoregions highlighted in the scenario that consider simultaneously both ecoregion vulnerability and economic costs of land acquisition. Ecoregions included in priority sets under these criteria should yield best returns of investments since they harbor species with high extinction risk and have lower mean land cost. Conclusions/Significance Our study highlights ecoregions of particular importance for the conservation of the world's carnivores defining global conservation priorities in analyses that encompass socioeconomic and life-history factors. We consider the identification of a comprehensive priority-set of areas as a first step towards an in-situ biodiversity maintenance strategy. PMID:19710911
Powers, Christina; Hendren, Christine; Wang, Amy; Davis, J Michael
2014-10-01
As efforts to develop new applications of engineered nanoscale materials (ENMs) continue to grow, so too has interest in the environmental, health, and safety (EHS) implications of these materials. However, thorough evaluation and interpretation of such implications could require substantial resources (e.g., estimated as >$120 million per year in federal funding 2013-2017). A structured, strategic approach for transparently planning research would support improved linkages between ENM research and risk assessments, and thereby enhance the utility of financial and other resources for EHS studies of ENMs. For this reason, we applied Comprehensive Environmental Assessment (CEA) as an approach to provide transparent input into research planning for 2 types of ENMs: nanoscale titanium dioxide and nanoscale silver. For each of these CEA applications, we employed a collective judgment method known as Nominal Group Technique (NGT) in 2 workshops sponsored by the US Environmental Protection Agency (USEPA). The objective of this paper is to present the outcomes of these CEA applications in the context of how our methodology can inform future efforts to identify collective goals in science (e.g., research priorities) through structured decision support approaches. Outcomes include clear lists of research priorities for each ENM developed through transparently engaging stakeholders having diverse technical and sector perspectives. In addition, we identified several procedural aspects that could be refined, including emphasizing breakout group interactions, identifying broad information priorities before more detailed research questions, and using rating rather than ranking prioritization methods. Beyond the research directions identified for specific ENMs, lessons learned about engaging stakeholders in research planning are expected to inform future research planning efforts for ENMs and other emerging materials across the scientific community. © 2014 SETAC.
Rehm, Roberta S.; Fuentes-Afflick, Elena; Fisher, Lucille T.; Chesla, Catherine A.
2014-01-01
Families undertake extensive planning during transition to adulthood so youth with concomitant special health care needs and developmental disabilities will have a long-term high quality of life. Findings from an interpretive field study involving 64 youth and their parents indicated that the meaning of adulthood was functioning as independently as possible with appropriate supports. Parental priorities included protecting health, assuring safety and security in multiple realms, finding meaningful activities after high school, and establishing supportive social relationships. These priorities demonstrated the need to broaden usual health care transition goals that focus on finding adult providers and optimizing self-management. PMID:22869218
Biological and environmental interactions of emerging two-dimensional nanomaterials
Wang, Zhongying; Zhu, Wenpeng; Qiu, Yang; Yi, Xin; von dem Bussche, Annette; Kane, Agnes; Gao, Huajian; Koski, Kristie; Hurt, Robert
2016-01-01
Two-dimensional materials have become a major focus in materials chemistry research worldwide with substantial efforts centered on synthesis, property characterization, and technological application. These high-aspect ratio sheet-like solids come in a wide array of chemical compositions, crystal phases, and physical forms, and are anticipated to enable a host of future technologies in areas that include electronics, sensors, coatings, barriers, energy storage and conversion, and biomedicine. A parallel effort has begun to understand the biological and environmental interactions of synthetic nanosheets, both to enable the biomedical developments and to ensure human health and safety for all application fields. This review covers the most recent literature on the biological responses to 2D materials and also draws from older literature on natural lamellar minerals to provide additional insight into the essential chemical behaviors. The article proposes a framework for more systematic investigation of biological behavior in the future, rooted in fundamental materials chemistry and physics. That framework considers three fundamental interaction modes: (i) chemical interactions and phase transformations, (ii) electronic and surface redox interactions, and (iii) physical and mechanical interactions that are unique to near-atomically-thin, high-aspect-ratio solids. Two-dimensional materials are shown to exhibit a wide range of behaviors, which reflect the diversity in their chemical compositions, and many are expected to undergo reactive dissolution processes that will be key to understanding their behaviors and interpreting biological response data. The review concludes with a series of recommendations for high-priority research subtopics at the “bio-nanosheet” interface that we hope will enable safe and successful development of technologies related to two-dimensional nanomaterials. PMID:26923057
Assessment of shrimp farming impact on groundwater quality using analytical hierarchy process
NASA Astrophysics Data System (ADS)
Anggie, Bernadietta; Subiyanto, Arief, Ulfah Mediaty; Djuniadi
2018-03-01
Improved shrimp farming affects the groundwater quality conditions. Assessment of shrimp farming impact on groundwater quality conventionally has less accuracy. This paper presents the implementation of Analytical Hierarchy Process (AHP) method for assessing shrimp farming impact on groundwater quality. The data used is the impact data of shrimp farming in one of the regions in Indonesia from 2006-2016. Criteria used in this study were 8 criteria and divided into 49 sub-criteria. The weighting by AHP performed to determine the importance level of criteria and sub-criteria. Final priority class of shrimp farming impact were obtained from the calculation of criteria's and sub-criteria's weights. The validation was done by comparing priority class of shrimp farming impact and water quality conditions. The result show that 50% of the total area was moderate priority class, 37% was low priority class and 13% was high priority class. From the validation result impact assessment for shrimp farming has been high accuracy to the groundwater quality conditions. This study shows that assessment based on AHP has a higher accuracy to shrimp farming impact and can be used as the basic fisheries planning to deal with impacts that have been generated.
Adamse, Paulien; Van der Fels-Klerx, H J Ine; de Jong, Jacob
2017-08-01
This study aimed to obtain insights into the presence of cadmium, lead, mercury and arsenic in feed materials and feed over time for the purpose of guiding national monitoring. Data from the Dutch feed monitoring programme and from representatives of the feed industry during the period 2007-13 were used. Data covered a variety of feed materials and compound feeds in the Netherlands. Trends in the percentage of samples that exceeded the maximum limit (ML) set by the European Commission, and trends in average, median and 90th percentile concentrations of each of these elements were investigated. Based on the results, monitoring should focus on feed material of mineral origin, feed material of marine origin, especially fish meal, seaweed and algae, as well as feed additives belonging to the functional groups of (1) trace elements (notably cupric sulphate, zinc oxide and manganese oxide for arsenic) and (2) binders and anti-caking agents. Mycotoxin binders are a new group of feed additives that also need attention. For complementary feed it is important to make a proper distinction between mineral and non-mineral feed (lower ML). Forage crops in general do not need high priority in monitoring programmes, although for arsenic grass meal still needs attention.
NASA Technical Reports Server (NTRS)
Strom, Stephen; Sargent, Wallace L. W.; Wolff, Sidney; Ahearn, Michael F.; Angel, J. Roger; Beckwith, Steven V. W.; Carney, Bruce W.; Conti, Peter S.; Edwards, Suzan; Grasdalen, Gary
1991-01-01
Optical/infrared (O/IR) astronomy in the 1990's is reviewed. The following subject areas are included: research environment; science opportunities; technical development of the 1980's and opportunities for the 1990's; and ground-based O/IR astronomy outside the U.S. Recommendations are presented for: (1) large scale programs (Priority 1: a coordinated program for large O/IR telescopes); (2) medium scale programs (Priority 1: a coordinated program for high angular resolution; Priority 2: a new generation of 4-m class telescopes); (3) small scale programs (Priority 1: near-IR and optical all-sky surveys; Priority 2: a National Astrometric Facility); and (4) infrastructure issues (develop, purchase, and distribute optical CCDs and infrared arrays; a program to support large optics technology; a new generation of large filled aperture telescopes; a program to archive and disseminate astronomical databases; and a program for training new instrumentalists)
49 CFR 350.329 - How may a State or local agency qualify for High Priority Funds?
Code of Federal Regulations, 2014 CFR
2014-10-01
... ensure the proposal is consistent with State and national CMV safety program priorities. (3) Certify that... sanctions for violations of CMV and driver laws and regulations that are consistent with those of the State...
49 CFR 350.329 - How may a State or local agency qualify for High Priority Funds?
Code of Federal Regulations, 2013 CFR
2013-10-01
... ensure the proposal is consistent with State and national CMV safety program priorities. (3) Certify that... sanctions for violations of CMV and driver laws and regulations that are consistent with those of the State...
49 CFR 350.329 - How may a State or local agency qualify for High Priority Funds?
Code of Federal Regulations, 2012 CFR
2012-10-01
... ensure the proposal is consistent with State and national CMV safety program priorities. (3) Certify that... sanctions for violations of CMV and driver laws and regulations that are consistent with those of the State...
Cartier, Yuri; Creatore, Maria I; Hoffman, Steven J; Potvin, Louise
2018-06-22
Priority-driven funding streams for population and public health are an important part of the health research landscape and contribute to orienting future scholarship in the field. While research priorities are often made public through targeted calls for research, less is known about how research funding organisations arrive at said priorities. Our objective was to explore how public health research funding organisations develop priorities for strategic extramural research funding programmes. Content analysis of published academic and grey literature and key informant interviews for five public and private funders of public health research in the United Kingdom, Australia, the United States and France were performed. We found important distinctions in how funding organisations processed potential research priorities through four non-sequential phases, namely idea generation, idea analysis, idea socialisation and idea selection. Funders generally involved the public health research community and public health decision-makers in idea generation and socialisation, but other groups of stakeholders (e.g. the public, advocacy organisations) were not as frequently included. Priority-setting for strategic funding programmes in public health research involves consultation mainly with researchers in the early phase of the process. There is an opportunity for greater breadth of participation and more transparency in priority-setting mechanisms for strategic funding programmes in population and public health research.
10 CFR 216.8 - Communications.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 10 Energy 3 2011-01-01 2011-01-01 false Communications. 216.8 Section 216.8 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC ENERGY SUPPLIES § 216.8 Communications. All written communications concerning these regulations shall be...
34 CFR 388.22 - What priorities does the Secretary consider in making an award?
Code of Federal Regulations, 2011 CFR
2011-07-01
... education methods, such as interactive audio, video, computer technologies, or existing telecommunications... training materials and practices. The proposed project demonstrates an effective plan to develop and... programs by other State vocational rehabilitation units. (2) Distance education. The proposed project...
34 CFR 388.22 - What priorities does the Secretary consider in making an award?
Code of Federal Regulations, 2010 CFR
2010-07-01
... education methods, such as interactive audio, video, computer technologies, or existing telecommunications... training materials and practices. The proposed project demonstrates an effective plan to develop and... programs by other State vocational rehabilitation units. (2) Distance education. The proposed project...
10 CFR 216.8 - Communications.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 3 2013-01-01 2013-01-01 false Communications. 216.8 Section 216.8 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC ENERGY SUPPLIES § 216.8 Communications. All written communications concerning these regulations shall be...
34 CFR 388.22 - What priorities does the Secretary consider in making an award?
Code of Federal Regulations, 2014 CFR
2014-07-01
... education methods, such as interactive audio, video, computer technologies, or existing telecommunications... training materials and practices. The proposed project demonstrates an effective plan to develop and... programs by other State vocational rehabilitation units. (2) Distance education. The proposed project...
34 CFR 388.22 - What priorities does the Secretary consider in making an award?
Code of Federal Regulations, 2013 CFR
2013-07-01
... education methods, such as interactive audio, video, computer technologies, or existing telecommunications... training materials and practices. The proposed project demonstrates an effective plan to develop and... programs by other State vocational rehabilitation units. (2) Distance education. The proposed project...
34 CFR 388.22 - What priorities does the Secretary consider in making an award?
Code of Federal Regulations, 2012 CFR
2012-07-01
... education methods, such as interactive audio, video, computer technologies, or existing telecommunications... training materials and practices. The proposed project demonstrates an effective plan to develop and... programs by other State vocational rehabilitation units. (2) Distance education. The proposed project...
Corrosion Protection of Launch Infrastructure and Hardware Through the Space Shuttle Program
NASA Technical Reports Server (NTRS)
Calle, L. M.
2011-01-01
Corrosion, the environmentally induced degradation of materials, has been a challenging and costly problem that has affected NASA's launch operations since the inception of the Space Program. Corrosion studies began at NASA's Kennedy Space Center (KSC) in 1966 during the Gemini/Apollo Programs with the evaluation of long-term protective coatings for the atmospheric protection of carbon steel. NASA's KSC Beachside Corrosion Test Site, which has been documented by the American Society of Materials (ASM) as one of the most corrosive, naturally occurring environments in the world, was established at that time. With the introduction of the Space Shuttle in 1981, the already highly corrosive natural conditions at the launch pad were rendered even more severe by the acidic exhaust from the solid rocket boosters. In the years that followed, numerous efforts at KSC identified materials, coatings, and maintenance procedures for launch hardware and equipment exposed to the highly corrosiye environment at the launch pads. Knowledge on materials degradation, obtained by facing the highly corrosive conditions of the Space Shuttle launch environment, as well as limitations imposed by the environmental impact of corrosion control, have led researchers at NASA's Corrosion Technology Laboratory to establish a new technology development capability in the area of corrosion prevention, detection, and mitigation at KSC that is included as one of the "highest priority" technologies identified by NASA's integrated technology roadmap. A historical perspective highlighting the challenges encountered in protecting launch infrastructure and hardware from corrosion during the life of the Space Shuttle program and the new technological advances that have resulted from facing the unique and highly corrosive conditions of the Space Shuttle launch environment will be presented.
Arnett, Kelly; Sudore, Rebecca L; Nowels, David; Feng, Cindy X; Levy, Cari R; Lum, Hillary D
2017-12-01
Interprofessional health care team members consider advance care planning (ACP) to be important, yet gaps remain in systematic clinical routines to support ACP. A clearer understanding of the interprofessional team members' perspectives on ACP clinical routines in diverse settings is needed. One hundred eighteen health care team members from community-based clinics, long-term care facilities, academic clinics, federally qualified health centers, and hospitals participated in a 35-question, cross-sectional online survey to assess clinical routines, workflow processes, and policies relating to ACP. Respondents were 53% physicians, 18% advanced practice nurses, 11% nurses, and 18% other interprofessional team members including administrators, chaplains, social workers, and others. Regarding clinical routines, respondents reported that several interprofessional team members play a role in facilitating ACP (ie, physician, social worker, nurse, others). Most (62%) settings did not have, or did not know of, policies related to ACP documentation. Only 14% of settings had a patient education program. Two-thirds of the respondents said that addressing ACP is a high priority and 85% felt that nonphysicians could have ACP conversations with appropriate training. The clinical resources needed to improve clinical routines included training for providers and staff, dedicated staff to facilitate ACP, and availability of patient/family educational materials. Although interprofessional health care team members consider ACP a priority and several team members may be involved, clinical settings lack systematic clinical routines to support ACP. Patient educational materials, interprofessional team training, and policies to support ACP clinical workflows that do not rely solely on physicians could improve ACP across diverse clinical settings.
Aberration-corrected scanning transmission electron microscopy for complex transition metal oxides
NASA Astrophysics Data System (ADS)
Qing-Hua, Zhang; Dong-Dong, Xiao; Lin, Gu
2016-06-01
Lattice, charge, orbital, and spin are the four fundamental degrees of freedom in condensed matter, of which the interactive coupling derives tremendous novel physical phenomena, such as high-temperature superconductivity (high-T c SC) and colossal magnetoresistance (CMR) in strongly correlated electronic system. Direct experimental observation of these freedoms is essential to understanding the structure-property relationship and the physics behind it, and also indispensable for designing new materials and devices. Scanning transmission electron microscopy (STEM) integrating multiple techniques of structure imaging and spectrum analysis, is a comprehensive platform for providing structural, chemical and electronic information of materials with a high spatial resolution. Benefiting from the development of aberration correctors, STEM has taken a big breakthrough towards sub-angstrom resolution in last decade and always steps forward to improve the capability of material characterization; many improvements have been achieved in recent years, thereby giving an in-depth insight into material research. Here, we present a brief review of the recent advances of STEM by some representative examples of perovskite transition metal oxides; atomic-scale mapping of ferroelectric polarization, octahedral distortions and rotations, valence state, coordination and spin ordering are presented. We expect that this brief introduction about the current capability of STEM could facilitate the understanding of the relationship between functional properties and these fundamental degrees of freedom in complex oxides. Project supported by the National Key Basic Research Project, China (Grant No. 2014CB921002), the Strategic Priority Research Program of Chinese Academy of Sciences (Grant No. XDB07030200), and the National Natural Science Foundation of China (Grant Nos. 51522212 and 51421002).
Noradrenergic Mechanisms of Arousal’s Bidirectional Effects on Episodic Memory
Clewett, David; Sakaki, Michiko; Nielsen, Shawn; Petzinger, Giselle; Mather, Mara
2016-01-01
Arousal’s selective effects on cognition go beyond the simple enhancement of emotional stimuli, sometimes enhancing and other times impairing processing of proximal neutral information. Past work shows that arousal impairs encoding of subsequent neutral stimuli regardless of their top-down priority via the engagement of β-adrenoreceptors. In contrast, retrograde amnesia induced by emotional arousal can flip to enhancement when preceding neutral items are prioritized in top-down attention. Whether β-adrenoreceptors also contribute to this retrograde memory enhancement of goal-relevant neutral stimuli is unclear. In this pharmacological study, we administered 40mg of propranolol or 40mg of placebo to healthy young adults to examine whether emotional arousal’s bidirectional effects on declarative memory relies on β-adrenoreceptor activation. Following pill intake, participants completed an emotional oddball task in which they were asked to prioritize a neutral object appearing just before an emotional or neutral oddball image within a sequence of 7 neutral objects. Under placebo, emotional oddballs impaired memory for lower priority oddball+1 objects but had no effect on memory for high priority oddball−1 objects. Propranolol blocked this anterograde amnesic effect of arousal. Emotional oddballs also enhanced selective memory trade-offs significantly more in the placebo than drug condition, such that high priority oddball−1 objects were more likely to be remembered at the cost of their corresponding lower priority oddball+1 objects under arousal. Lastly, those who recalled more high priority oddball−1 objects preceding an emotional versus neutral oddball image showed greater increases in salivary alpha-amylase, a biomarker of noradrenergic system activation, across the task. Together these findings suggest that different noradrenergic mechanisms contribute to the anterograde and retrograde mnemonic effects of arousal on proximal neutral memoranda. PMID:27815214
Noradrenergic mechanisms of arousal's bidirectional effects on episodic memory.
Clewett, David; Sakaki, Michiko; Nielsen, Shawn; Petzinger, Giselle; Mather, Mara
2017-01-01
Arousal's selective effects on cognition go beyond the simple enhancement of emotional stimuli, sometimes enhancing and other times impairing processing of proximal neutral information. Past work shows that arousal impairs encoding of subsequent neutral stimuli regardless of their top-down priority via the engagement of β-adrenoreceptors. In contrast, retrograde amnesia induced by emotional arousal can flip to enhancement when preceding neutral items are prioritized in top-down attention. Whether β-adrenoreceptors also contribute to this retrograde memory enhancement of goal-relevant neutral stimuli is unclear. In this pharmacological study, we administered 40mg of propranolol or 40mg of placebo to healthy young adults to examine whether emotional arousal's bidirectional effects on declarative memory relies on β-adrenoreceptor activation. Following pill intake, participants completed an emotional oddball task in which they were asked to prioritize a neutral object appearing just before an emotional or neutral oddball image within a sequence of 7 neutral objects. Under placebo, emotional oddballs impaired memory for lower priority oddball+1 objects but had no effect on memory for high priority oddball-1 objects. Propranolol blocked this anterograde amnesic effect of arousal. Emotional oddballs also enhanced selective memory trade-offs significantly more in the placebo than drug condition, such that high priority oddball-1 objects were more likely to be remembered at the cost of their corresponding lower priority oddball+1 objects under arousal. Lastly, those who recalled more high priority oddball-1 objects preceding an emotional versus neutral oddball image showed greater increases in salivary alpha-amylase, a biomarker of noradrenergic system activation, across the task. Together these findings suggest that different noradrenergic mechanisms contribute to the anterograde and retrograde mnemonic effects of arousal on proximal neutral memoranda. Copyright © 2016 Elsevier Inc. All rights reserved.
NASA/SDIO Space Environmental Effects on Materials Workshop, part 2
NASA Technical Reports Server (NTRS)
Teichman, Louis A. (Compiler); Stein, Bland A. (Compiler)
1989-01-01
The National Aeronautics and Space Administration (NASA) and the Strategic Defense Initiative Organization (SDIO) cosponsored a workshop on Space Environmental Effects on Materials. The joint workshop was designed to inform participants of the present state of knowledge regarding space environmental effects on materials and to identify knowledge gaps that prevent informed decisions on the best use of advanced materials in space for long duration NASA and SDIO missions. Establishing priorities for future ground based and space based materials research was a major goal of the workshop. The end product of the workshop was an assessment of the current state-of-the-art in space environmental effects on materials in order to develop a national plan for spaceflight experiments.
Occupational health research priorities in Malaysia: a Delphi study
Sadhra, S; Beach, J; Aw, T; Sheikh-Ahmed, K
2001-01-01
OBJECTIVES—As part of a consultancy project on occupational health, the Delphi method was used to identify research priorities in occupational health in Malaysia. METHODS—Participation was sought from government ministries, industry, and professional organisations, and university departments with an interest in occupational and public health. Two rounds of questionnaires resulted in a final list of priorities, with noticeable differences between participants depending on whether they worked in industry or were from government organisations. RESULTS—The participation rate of 71% (55 of 78) was obtained for the first questionnaire and 76% (72 of 95) for the second questionnaire. The participants identified occupational health problems for specific groups and industries as the top research priority area (ranked as top priority by 25% of participants). Ministry of Health participants placed emphasis on healthcare workers (52% ranking it as top priority), whereas those from industry identified construction and plantation workers as groups, which should be accorded the highest priority. Evaluation of research and services was given a low priority. CONCLUSIONS—The priorities for occupational health determined with the Delphi approach showed differences between Malaysia, a developing country, and findings from similar European studies. This may be expected, as differences exist in stages of economic development, types of industries, occupational activities, and cultural attitudes to occupational health and safety. Chemical poisonings and workplace accidents were accorded a high priority. By contrast with findings from western countries, workplace psychosocial problems and musculoskeletal injuries were deemed less important. There also seemed to be greater emphasis on adopting interventions for identified problems based on experience in other countries rather than the need to evaluate local occupational health provisions. Keywords: occupational health; research priorities; Malaysia PMID:11404445
OCCURRENCE OF A NEW GENERATION OF DISINFECTION BY-PRODUCTS
A survey of disinfection by-product (DBP) occurrence in the United States was conducted at 12 drinking water treatment plants. In addition to currently regulated DBPs, more than 50 DBPs that rated a high priority for potential toxicity were studied. These priority DBPs included...
Durán, América P.; Duffy, James P.; Gaston, Kevin J.
2014-01-01
Agroecosystems have traditionally been considered incompatible with biological conservation goals, and often been excluded from spatial conservation prioritization strategies. The consequences for the representativeness of identified priority areas have been little explored. Here, we evaluate these for biodiversity and carbon storage representation when agricultural land areas are excluded from a spatial prioritization strategy for South America. Comparing different prioritization approaches, we also assess how the spatial overlap of priority areas changes. The exclusion of agricultural lands was detrimental to biodiversity representation, indicating that priority areas for agricultural production overlap with areas of relatively high occurrence of species. By contrast, exclusion of agricultural lands benefits representation of carbon storage within priority areas, as lands of high value for agriculture and carbon storage overlap little. When agricultural lands were included and equally weighted with biodiversity and carbon storage, a balanced representation resulted. Our findings suggest that with appropriate management, South American agroecosystems can significantly contribute to biodiversity conservation. PMID:25143040
Occupational health research priorities in Malaysia: a Delphi study.
Sadhra, S; Beach, J R; Aw, T C; Sheikh-Ahmed, K
2001-07-01
As part of a consultancy project on occupational health, the Delphi method was used to identify research priorities in occupational health in Malaysia. Participation was sought from government ministries, industry, and professional organisations, and university departments with an interest in occupational and public health. Two rounds of questionnaires resulted in a final list of priorities, with noticeable differences between participants depending on whether they worked in industry or were from government organisations. The participation rate of 71% (55 of 78) was obtained for the first questionnaire and 76% (72 of 95) for the second questionnaire. The participants identified occupational health problems for specific groups and industries as the top research priority area (ranked as top priority by 25% of participants). Ministry of Health participants placed emphasis on healthcare workers (52% ranking it as top priority), whereas those from industry identified construction and plantation workers as groups, which should be accorded the highest priority. Evaluation of research and services was given a low priority. The priorities for occupational health determined with the Delphi approach showed differences between Malaysia, a developing country, and findings from similar European studies. This may be expected, as differences exist in stages of economic development, types of industries, occupational activities, and cultural attitudes to occupational health and safety. Chemical poisonings and workplace accidents were accorded a high priority. By contrast with findings from western countries, workplace psychosocial problems and musculoskeletal injuries were deemed less important. There also seemed to be greater emphasis on adopting interventions for identified problems based on experience in other countries rather than the need to evaluate local occupational health provisions.
Ayres, Cynthia G; Griffith, Hurdis M
2007-03-01
To obtain feedback from contracted health plan (HP) clinicians responsible for implementing preventive services regarding an established set of priority guidelines identified by a coalition of medical directors and to identify barriers to and facilitators of the implementation of these priority guidelines in clinician practice. Qualitative design using a focus group approach. Three focus group meetings among contracted HP clinicians were conducted in New Jersey in 3 geographic regions (northern, central, and southern New Jersey). Clinicians directly involved in delivering preventive services to pediatric, adult, and geriatric patients participated. Barriers to guideline implementation were identified by the clinicians regarding payment and cost, time, legal issues, inconsistency among HP tools, tracking, a lack of internalization, and the patient-clinician relationship. In addition, facilitators of guideline implementation, including HP support, patient materials, clinician awareness, and tool consistency, were identified. Clinicians' perceived barriers to guideline implementation are in themselves a barrier to the delivery of preventive care services. If clinicians perceive barriers to implementing priority recommendations, they may be unlikely to make the conscious effort to deliver preventive care. There needs to be better dialogue between HPs and contracted clinicians to minimize the perceptions of barriers and to increase clinician awareness of and sensitivity to preventive care for priority implementation. To improve the delivery of preventive services in clinician practice, competing HPs must communicate in a single voice with contracted clinicians in the area of preventive care.
Changing Priorities in Vaccinology: Antibiotic Resistance Moving to the Top.
Tagliabue, Aldo; Rappuoli, Rino
2018-01-01
Antimicrobial resistance (AMR) is currently the most alarming issue for human health. AMR already causes 700,000 deaths/year. It is estimated that 10 million deaths due to AMR will occur every year after 2050. This equals the number of people dying of cancer every year in present times. International institutions such as G20, World Bank, World Health Organization (WHO), UN General Assembly, European Union, and the UK and USA governments are calling for new antibiotics. To underline this emergency, a list of antibiotic-resistant "priority pathogens" has been published by WHO. It contains 12 families of bacteria that represent the greatest danger for human health. Resistance to multiple antibiotics is particularly relevant for the Gram-negative bacteria present in the list. The ability of these bacteria to develop mechanisms to resist treatment could be transmitted with genetic material, allowing other bacteria to become drug resistant. Although the search for new antimicrobial drugs remains a top priority, the pipeline for new antibiotics is not promising, and alternative solutions are needed. A possible answer to AMR is vaccination. In fact, while antibiotic resistance emerges rapidly, vaccines can lead to a much longer lasting control of infections. New technologies, such as the high-throughput cloning of human B cells from convalescent or vaccinated people, allow for finding new protective antigens (Ags) that could not be identified with conventional technologies. Antibodies produced by convalescent B cell clones can be screened for their ability to bind, block, and kill bacteria, using novel high-throughput microscopy platforms that rapidly capture digital images, or by conventional technologies such as bactericidal, opsono-phagocytosis and FACS assays. Selected antibodies expressed by recombinant DNA techniques can be used for passive immunization in animal models and tested for protection. Antibodies providing the best protection can be employed to identify new Ags and then used for generating highly specific recombinant Fab fragments. Co-crystallization of Ags bound to Fab fragments will allow us to determine the structure and characteristics of new Ags. This structure-based Ag design will bring to a new generation of vaccines able to target previously elusive infections, thereby offering an effective solution to the problem of AMR.
Federal Register 2010, 2011, 2012, 2013, 2014
2013-07-30
... components: Hydrogeologic study; Surface water sampling study; Stream biological study; Air quality survey... components: Biological survey; Biota survey; Surface water and sediment characterization; Groundwater... impacted groundwater in three water bearing zones at the Site; the unconsolidated materials zone, the upper...
10 CFR 216.3 - Requests for assistance.
Code of Federal Regulations, 2011 CFR
2011-01-01
... DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... application are critical and essential for a purpose identified in section 101(c). The application shall be... for which assistance is requested are critical and essential to the construction or operation of the...
10 CFR 216.3 - Requests for assistance.
Code of Federal Regulations, 2012 CFR
2012-01-01
... DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... application are critical and essential for a purpose identified in section 101(c). The application shall be... for which assistance is requested are critical and essential to the construction or operation of the...
34 CFR 660.34 - What priorities may the Secretary establish?
Code of Federal Regulations, 2010 CFR
2010-07-01
... or Latin America, or the languages of those regions. (3) Topics of research and studies; for example, language acquisition processes, methodology of foreign language instruction, foreign language performance... described in § 660.10. (2) Specific languages or regions for study or materials development; for example...
Centralia College Strategic Plan, January 1996. Preliminary Report.
ERIC Educational Resources Information Center
Centralia Coll., WA.
Based on an analysis of the internal and external environment, this report describes the mission, values, and strategic priorities of Centralia College (CC), in Washington. Following introductory materials describing the role of strategic planning, a historical perspective of planning at the college is presented, reviewing previous strategic…
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 3 2010-01-01 2010-01-01 false Violations. 216.9 Section 216.9 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE DOMESTIC ENERGY SUPPLIES § 216.9 Violations. Any person who willfully furnishes false information or conceals any...
The Humanization of Education.
ERIC Educational Resources Information Center
Nechaev, N.; Usov, V.
1991-01-01
Warns against a tendency to command Soviet educational reform from above without thought of practical results. Criticizes proceeding before priorities have been set or put into practice, and ignoring the need for a vehicle of reform, material, and labor resources. Urges the humanization of architectural education through study of art, the…
10 CFR 216.3 - Requests for assistance.
Code of Federal Regulations, 2010 CFR
2010-01-01
... DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... application are critical and essential for a purpose identified in section 101(c). The application shall be... for which assistance is requested are critical and essential to the construction or operation of the...
Technology transfer and international development: Materials and manufacturing technology
NASA Technical Reports Server (NTRS)
1982-01-01
Policy oriented studies on technological development in several relatively advanced developing countries were conducted. Priority sectors defined in terms of technological sophistication, capital intensity, value added, and export potential were studied in Brazil, Venezuela, Israel, and Korea. The development of technological policy alternatives for the sponsoring country is assessed. Much emphasis is placed on understanding the dynamics of the sectors through structured interviews with a large sample of firms in the leading manufacturing and materials processing sectors.
Governance factors in the identification of global conservation priorities for mammals
Eklund, Johanna; Arponen, Anni; Visconti, Piero; Cabeza, Mar
2011-01-01
Global conservation priorities have often been identified based on the combination of species richness and threat information. With the development of the field of systematic conservation planning, more attention has been given to conservation costs. This leads to prioritizing developing countries, where costs are generally low and biodiversity is high. But many of these countries have poor governance, which may result in ineffective conservation or in larger costs than initially expected. We explore how the consideration of governance affects the selection of global conservation priorities for the world's mammals in a complementarity-based conservation prioritization. We use data on Control of Corruption (Worldwide Governance Indicators project) as an indicator of governance effectiveness, and gross domestic product per capita as an indicator of cost. We show that, while core areas with high levels of endemism are always selected as important regardless of governance and cost values, there are clear regional differences in selected sites when biodiversity, cost or governance are taken into account separately. Overall, the analysis supports the concentration of conservation efforts in most of the regions generally considered of high priority, but stresses the need for different conservation approaches in different continents owing to spatial patterns of governance and economic development. PMID:21844045
Identifying appropriate protected areas for endangered fern species under climate change.
Wang, Chun-Jing; Wan, Ji-Zhong; Zhang, Zhi-Xiang; Zhang, Gang-Min
2016-01-01
The management of protected areas (PAs) is widely used in the conservation of endangered plant species under climate change. However, studies that have identified appropriate PAs for endangered fern species are rare. To address this gap, we must develop a workflow to plan appropriate PAs for endangered fern species that will be further impacted by climate change. Here, we used endangered fern species in China as a case study, and we applied conservation planning software coupled with endangered fern species distribution data and distribution modeling to plan conservation areas with high priority protection needs under climate change. We identified appropriate PAs for endangered fern species under climate change based on the IUCN protected area categories (from Ia to VI) and planned additional PAs for endangered fern species. The high priority regions for protecting the endangered fern species were distributed throughout southern China. With decreasing temperature seasonality, the priority ranking of all endangered fern species is projected to increase in existing PAs. Accordingly, we need to establish conservation areas with low climate vulnerability in existing PAs and expand the conservation areas for endangered fern species in the high priority conservation regions.
Governance factors in the identification of global conservation priorities for mammals.
Eklund, Johanna; Arponen, Anni; Visconti, Piero; Cabeza, Mar
2011-09-27
Global conservation priorities have often been identified based on the combination of species richness and threat information. With the development of the field of systematic conservation planning, more attention has been given to conservation costs. This leads to prioritizing developing countries, where costs are generally low and biodiversity is high. But many of these countries have poor governance, which may result in ineffective conservation or in larger costs than initially expected. We explore how the consideration of governance affects the selection of global conservation priorities for the world's mammals in a complementarity-based conservation prioritization. We use data on Control of Corruption (Worldwide Governance Indicators project) as an indicator of governance effectiveness, and gross domestic product per capita as an indicator of cost. We show that, while core areas with high levels of endemism are always selected as important regardless of governance and cost values, there are clear regional differences in selected sites when biodiversity, cost or governance are taken into account separately. Overall, the analysis supports the concentration of conservation efforts in most of the regions generally considered of high priority, but stresses the need for different conservation approaches in different continents owing to spatial patterns of governance and economic development.
Gorlick, Marissa A; Worthy, Darrell A; Knopik, Valerie S; McGeary, John E; Beevers, Christopher G; Maddox, W Todd
2015-03-01
Humans with seven or more repeats in exon III of the DRD4 gene (long DRD4 carriers) sometimes demonstrate impaired attention, as seen in attention-deficit hyperactivity disorder, and at other times demonstrate heightened attention, as seen in addictive behavior. Although the clinical effects of DRD4 are the focus of much work, this gene may not necessarily serve as a "risk" gene for attentional deficits, but as a plasticity gene where attention is heightened for priority items in the environment and impaired for minor items. Here we examine the role of DRD4 in two tasks that benefit from selective attention to high-priority information. We examine a category learning task where performance is supported by focusing on features and updating verbal rules. Here, selective attention to the most salient features is associated with good performance. In addition, we examine the Operation Span (OSPAN) task, a working memory capacity task that relies on selective attention to update and maintain items in memory while also performing a secondary task. Long DRD4 carriers show superior performance relative to short DRD4 homozygotes (six or less tandem repeats) in both the category learning and OSPAN tasks. These results suggest that DRD4 may serve as a "plasticity" gene where individuals with the long allele show heightened selective attention to high-priority items in the environment, which can be beneficial in the appropriate context.
Gorlick, Marissa A.; Worthy, Darrell A.; Knopik, Valerie S.; McGeary, John E.; Beevers, Christopher G.; Maddox, W. Todd
2014-01-01
Humans with 7 or more repeats in exon III of the DRD4 gene (long DRD4 carriers) sometimes demonstrate impaired attention, as seen in ADHD, and at other times demonstrate heightened attention, as seen in addictive behavior. Though the clinical effects of DRD4 are the focus of much work, this gene may not necessarily serve as a ‘risk’ gene for attentional deficits, but as a plasticity gene where attention is heightened for priority items in the environment and impaired for minor items. Here we examine the role of DRD4 in two tasks that benefit from selective attention to high-priority information. We examine a category learning task where performance is supported by focusing on features and updating verbal rules. Here selective attention to the most salient features is associated with good performance. In addition, we examine the Operation Span Task (OSPAN), a working memory capacity task that relies on selective attention to update and maintain items in memory while also performing a secondary task. Long DRD4 carriers show superior performance relative to short DRD4 homozygotes (six or less tandem repeats) in both the category learning and OSPAN tasks. These results suggest that DRD4 may serve as a ‘plasticity’ gene where individuals with the long allele show heightened selective attention to high-priority items in the environment, which can be beneficial in the appropriate context. PMID:25244120
Moving graphene devices from lab to market: advanced graphene-coated nanoprobes
NASA Astrophysics Data System (ADS)
Hui, Fei; Vajha, Pujashree; Shi, Yuanyuan; Ji, Yanfeng; Duan, Huiling; Padovani, Andrea; Larcher, Luca; Li, Xiao Rong; Xu, Jing Juan; Lanza, Mario
2016-04-01
After more than a decade working with graphene there is still a preoccupying lack of commercial devices based on this wonder material. Here we report the use of high-quality solution-processed graphene sheets to fabricate ultra-sharp probes with superior performance. Nanoprobes are versatile tools used in many fields of science, but they can wear fast after some experiments, reducing the quality and increasing the cost of the research. As the market of nanoprobes is huge, providing a solution for this problem should be a priority for the nanotechnology industry. Our graphene-coated nanoprobes not only show enhanced lifetime, but also additional unique properties of graphene, such as hydrophobicity. Moreover, we have functionalized the surface of graphene to provide piezoelectric capability, and have fabricated a nano relay. The simplicity and low cost of this method, which can be used to coat any kind of sharp tip, make it suitable for the industry, allowing production on demand.After more than a decade working with graphene there is still a preoccupying lack of commercial devices based on this wonder material. Here we report the use of high-quality solution-processed graphene sheets to fabricate ultra-sharp probes with superior performance. Nanoprobes are versatile tools used in many fields of science, but they can wear fast after some experiments, reducing the quality and increasing the cost of the research. As the market of nanoprobes is huge, providing a solution for this problem should be a priority for the nanotechnology industry. Our graphene-coated nanoprobes not only show enhanced lifetime, but also additional unique properties of graphene, such as hydrophobicity. Moreover, we have functionalized the surface of graphene to provide piezoelectric capability, and have fabricated a nano relay. The simplicity and low cost of this method, which can be used to coat any kind of sharp tip, make it suitable for the industry, allowing production on demand. Electronic supplementary information (ESI) available. See DOI: 10.1039/c5nr06235g
Jacobsson, Josephine; Andréasson, My; Kölby, Lars; Elander, Anna; Selvaggi, Gennaro
2017-06-01
No surgical technique is reported to be the best option for gender-affirmation surgery (GAS) of the genitalia in transmen. Although patients' preferences are central when choosing a surgical technique, no studies have evaluated this factor. To investigate transmen's priorities and preferences regarding GAS of the genitalia. From November 2015 to March 2016, 54 transmen with the diagnosis of gender dysphoria who were referred to Sahlgrenska University Hospital for discussion of therapeutic steps (surgery and hormonal treatments) were asked to complete a questionnaire on different attributes achievable with GAS, such as sexual and urinary function and appearance. Forty-seven patients (87%) completed the questionnaire. Age ranged from 18 to 52 years (mean = 26 years, SD = 7.4 years). At the time of interview, no patient had undergone GAS of the genitalia. Answers to completed questionnaires. Seventy-six percent of patients identified themselves as male, and 24% wrote other terms such as "mostly male," "inter-gender" and "non-binary." Gender identity had a significant impact on patients' preferences for two questions: the importance of vaginal removal and the importance of having a penis that would be passable in places such as male dressing rooms. These items were more important to patients identifying themselves as male. The most important attributes requested were preserved orgasm ability and tactile sensation. The least important attribute was removal of the vagina, followed by having a penis of human material, minimal scarring, and size. The ability to urinate while standing was considered a high priority by some and a low priority by others. All answers ranged from "unimportant" to "imperative." This series of patients demonstrates a considerable heterogeneity among transmen in their gender identity and preferences regarding GAS of the genitalia, which supports the need for several techniques. Patients must be accurately informed on the different techniques and their specific benefits and limitations to make an informed choice. Jacobsson J, Andréasson M, Kölby L, et al. Patients' Priorities Regarding Female-to-Male Gender Affirmation Surgery of the Genitalia-A Pilot Study of 47 Patients in Sweden. J Sex Med 2017;14:857-864. Copyright © 2017 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.
Typology of end-of-life priorities in Saudi females: averaging analysis and Q-methodology.
Hammami, Muhammad M; Hammami, Safa; Amer, Hala A; Khodr, Nesrine A
2016-01-01
Understanding culture-and sex-related end-of-life preferences is essential to provide quality end-of-life care. We have previously explored end-of-life choices in Saudi males and found important culture-related differences and that Q-methodology is useful in identifying intraculture, opinion-based groups. Here, we explore Saudi females' end-of-life choices. A volunteer sample of 68 females rank-ordered 47 opinion statements on end-of-life issues into a nine-category symmetrical distribution. The ranking scores of the statements were analyzed by averaging analysis and Q-methodology. The mean age of the females in the sample was 30.3 years (range, 19-55 years). Among them, 51% reported average religiosity, 78% reported very good health, 79% reported very good life quality, and 100% reported high-school education or more. The extreme five overall priorities were to be able to say the statement of faith, be at peace with God, die without having the body exposed, maintain dignity, and resolve all conflicts. The extreme five overall dis-priorities were to die in the hospital, die well dressed, be informed about impending death by family/friends rather than doctor, die at peak of life, and not know if one has a fatal illness. Q-methodology identified five opinion-based groups with qualitatively different characteristics: "physical and emotional privacy concerned, family caring" (younger, lower religiosity), "whole person" (higher religiosity), "pain and informational privacy concerned" (lower life quality), "decisional privacy concerned" (older, higher life quality), and "life quantity concerned, family dependent" (high life quality, low life satisfaction). Out of the extreme 14 priorities/dis-priorities for each group, 21%-50% were not represented among the extreme 20 priorities/dis-priorities for the entire sample. Consistent with the previously reported findings in Saudi males, transcendence and dying in the hospital were the extreme end-of-life priority and dis-priority, respectively, in Saudi females. Body modesty was a major overall concern; however, concerns about pain, various types of privacy, and life quantity were variably emphasized by the five opinion-based groups but masked by averaging analysis.
Typology of end-of-life priorities in Saudi females: averaging analysis and Q-methodology
Hammami, Muhammad M; Hammami, Safa; Amer, Hala A; Khodr, Nesrine A
2016-01-01
Background Understanding culture-and sex-related end-of-life preferences is essential to provide quality end-of-life care. We have previously explored end-of-life choices in Saudi males and found important culture-related differences and that Q-methodology is useful in identifying intraculture, opinion-based groups. Here, we explore Saudi females’ end-of-life choices. Methods A volunteer sample of 68 females rank-ordered 47 opinion statements on end-of-life issues into a nine-category symmetrical distribution. The ranking scores of the statements were analyzed by averaging analysis and Q-methodology. Results The mean age of the females in the sample was 30.3 years (range, 19–55 years). Among them, 51% reported average religiosity, 78% reported very good health, 79% reported very good life quality, and 100% reported high-school education or more. The extreme five overall priorities were to be able to say the statement of faith, be at peace with God, die without having the body exposed, maintain dignity, and resolve all conflicts. The extreme five overall dis-priorities were to die in the hospital, die well dressed, be informed about impending death by family/friends rather than doctor, die at peak of life, and not know if one has a fatal illness. Q-methodology identified five opinion-based groups with qualitatively different characteristics: “physical and emotional privacy concerned, family caring” (younger, lower religiosity), “whole person” (higher religiosity), “pain and informational privacy concerned” (lower life quality), “decisional privacy concerned” (older, higher life quality), and “life quantity concerned, family dependent” (high life quality, low life satisfaction). Out of the extreme 14 priorities/dis-priorities for each group, 21%–50% were not represented among the extreme 20 priorities/dis-priorities for the entire sample. Conclusion Consistent with the previously reported findings in Saudi males, transcendence and dying in the hospital were the extreme end-of-life priority and dis-priority, respectively, in Saudi females. Body modesty was a major overall concern; however, concerns about pain, various types of privacy, and life quantity were variably emphasized by the five opinion-based groups but masked by averaging analysis. PMID:27274205
Impact of new medical technologies on health expenditures in Israel 2000-07.
Rabinovich, Mordechai; Wood, Francis; Shemer, Joshua
2007-01-01
The aim of this study was to estimate the impact of new medical technologies on public healthcare expenditures in Israel over the period 2000-07. For each year, government estimates for the costs of new technologies recommended as high-priority for public funding were summarized. The ratio of projected costs of these technologies to total public healthcare expenditures was calculated and compared with actual governmental budget allocations for new technologies. Funding all new high-priority medical technologies would have increased healthcare expenditures by 2.1 percent per year. Government allocations for new technologies raised expenditures by 1.0 percent per year. New medical technologies significantly increase healthcare expenditures in Israel. Budgetary constraints have reduced their actual impact by 52 percent. This study indicates the need for an annual addition of 2 percent to public healthcare budget for funding new high-priority technologies.
Development of an international research agenda for adult congenital heart disease nursing.
Goossens, Eva; Fleck, Desiree; Canobbio, Mary M; Harrison, Jeanine L; Moons, Philip
2013-02-01
Since the population of adults with congenital heart disease (CHD) is growing, the role of nurse specialists is expanding. In order to advance ACHD nursing, the establishment of an international nursing research agenda is recommended. We aimed to investigate research priorities as perceived by nurse specialists and researchers in ACHD. We applied a sequential quan-qual design. In the quantitative phase, a two-round Delphi study was conducted, in which 37 nurse specialists and nurse researchers in ACHD care participated. Respondents assessed the level of priority of 21 research topics using a 9-point rating scale (1 = no priority at all; 9 = very high priority). In the qualitative phase, semi-structured interviews were performed with six selected Delphi panelists, to scrutinize pending research questions. This study revealed that priority should be given to studies investigating knowledge and education of patients, outcomes of Advanced Practice Nursing, quality of life, transfer and transition, and illness experiences and psychosocial issues in adults with CHD. A low priority was given to post-operative pain, sexual functioning, transplantation in ACHD, and health care costs and utilization. Agreement about the level of priority was obtained for 14 out of 21 research topics. Based on this study, we could develop an international research agenda for ACHD. Researchers ought to focus on these areas of highest priority, in order to expand and strengthen the body of knowledge in ACHD nursing.
MsFLASH participants' priorities for alleviating menopausal symptoms.
Carpenter, J S; Woods, N F; Otte, J L; Guthrie, K A; Hohensee, C; Newton, K M; Joffe, H; Cohen, L; Sternfeld, B; Lau, R J; Reed, S D; LaCroix, A Z
2015-01-01
To describe self-reported menopausal symptom priorities and their association with demographics and other symptoms among participants in an intervention trial for vasomotor symptoms (VMS). Cross-sectional study embedded in the MsFLASH 02 trial, a three-by-two factorial design of yoga vs. exercise vs. usual activity and omega-3-fatty acid vs. placebo. At baseline, women (n = 354) completed hot flush diaries, a card sort task to prioritize symptoms they would most like to alleviate, and standardized questionnaires. The most common symptom priorities were: VMS (n = 322), sleep (n = 191), concentration (n = 140), and fatigue (n = 116). In multivariate models, women who chose VMS as their top priority symptom (n = 210) reported significantly greater VMS severity (p = 0.004) and never smoking (p = 0.012), and women who chose sleep as their top priority symptom (n = 100) were more educated (p ≤ 0.001) and had worse sleep quality (p < 0.001). ROC curves identified sleep scale scores that were highly predictive of ranking sleep as a top priority symptom. Among women entering an intervention trial for VMS and with relatively low prevalence of depression and anxiety, VMS was the priority symptom for treatment. A card sort may be a valid tool for quickly assessing symptom priorities in clinical practice and research.
18 CFR 281.206 - Priority 1 reclassification.
Code of Federal Regulations, 2010 CFR
2010-04-01
... entitlements” means, with respect to a particular interstate pipeline. (1) In the case of a direct sale customer, the volume of natural gas such direct sale customer is entitled to receive for high-priority uses...; (2) In the case of a local distribution company, the volume of natural gas which such local...
Key Problems in Science and Technology in Thailand.
ERIC Educational Resources Information Center
Yuthavong, Yongyuth; And Others
1985-01-01
Cites the need for promoting science/technology management and policy formation in Thailand, viewing contributions of science/technology to the socioeconomic development of the country as high priorities. Criteria for selecting priority areas and key problems are noted; they include relevance to development, availability of human resources, and…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-23
... measure for high-stakes decisions. (b) Design. The KEA must-- (1) Be a component of a State's student... States for measuring the academic achievement of elementary and secondary school students. In 2013, the... assessment. Priorities: This competition includes five absolute priorities and one competitive preference...
Department of Defense Curricula: Information Concerning Conversion for Civilian Use.
ERIC Educational Resources Information Center
Forgione, Pascal D., Jr.; Orth, Mollie N.
Designed to assist in the selection of national priorities for the conversion of military curricula to civilian use, a study selected curricula pertinent to occupations with high growth potential and evaluated them against criteria important for curriculum conversion decisions. Procedures consisted of identification of priority occupational areas…
75 FR 8854 - Teacher Incentive Fund Program
Federal Register 2010, 2011, 2012, 2013, 2014
2010-02-26
...The Secretary of Education (Secretary) proposes priorities, requirements, definitions, and selection criteria under the Teacher Incentive Fund (TIF) program. These proposed priorities, requirements, definitions, and selection criteria are designed to be used in two separate and distinct TIF grant competitions: The Main TIF competition, which will provide TIF funding to eligible entities to support their implementation of performance-based compensation systems (PBCSs) in accordance with the priorities, the Main TIF requirements, the definitions, and the selection criteria proposed in this document, and the TIF Evaluation competition, which will provide, in accordance with the priorities, the Main TIF requirements, the definitions, and the selection criteria as well as the Evaluation requirements proposed in this document, TIF funding to help pay for the costs of implementing these eligible entities' PBCS in exchange for an agreement to participate in the national evaluation. The Secretary may use these proposed TIF priorities, requirements, definitions, and selection criteria in fiscal year (FY) 2010 and subsequent years. We intend the proposed priorities, requirements, definitions, and selection criteria to improve student achievement in high-need schools by creating incentives for effective teachers and principals in these schools.
[National and regional prioritisation in Swedish health care: experiences from cardiology].
Carlsson, Jörg
2012-01-01
Prioritisation of medical services in Sweden takes place on two different levels. On the national level, the Swedish priority guidelines ascribe priority values ranging from 1 (high priority) to 10 (low priority) to measures (in terms of condition-treatment pairs) of prevention, diagnosis, treatment and rehabilitation of cardiovascular diseases. In addition, this list contains interventions that should be avoided and those that should only be provided as part of clinical research projects. The government then commissions a multi-professional team under the supervision of the National Board of Health and Welfare "Socialstyelsen" with the development of corresponding guidelines. In addition to the scientific evidence, the priority lists incorporate ethical and economical aspects and are based on the so-called ethics platform consisting of human dignity, needs, solidarity and cost-effectiveness. At the other level of prioritisation there are regional projects aiming at the in- and exclusion of medical measures. The Swedish prioritisation process will be described using the example of priority lists in cardiology. (As supplied by publisher). Copyright © 2012. Published by Elsevier GmbH.
[The contribution of oncology nursing to the Swiss Research Agenda for Nursing - SRAN].
Shaha, Maya; Schmid-Büchi, Silvia; Abt, Judith; Mathis-Jäggi, Franziska; Holdener, Eveline; Riederer, Evelyn; Stoll, Hans Ruedi; Fliedner, Monica; Imhof, Lorenz
2008-12-01
Worldwide, cancer remains the second most frequent cause of death in adults and children. A cancer diagnosis often marks the beginning of therapies that may continue over months and years. These therapies frequently consist in surgical interventions in combination with chemotherapy and radiotherapy. For all healthcare professionals involved, cancer also signifies a very complex illness with high demands. It is therefore important to identify research priorities in order to successfully and comprehensively address these demands and to provide high quality patient care. In order to identify research priorities in oncology care in Switzerland, a systematic review of literature was conducted. A total of 30 research priorities emerged from the literature. In accordance with SRAN guidelines, 25 were passed on to the SRAN. The systematic identification of research priorities in oncology nursing has, for the first time, resulted in a list of topics in need of investigation in Switzerland. Completing the list of research priorities for oncology nursing with an updated systematic review of literature and presenting it to a larger and more representative group of oncology nurses, experts, and nurse scientists with oncology nursing experience for assessment and valuation, will be crucial for any future revision of the SRAN. In the future, it will be indispensable to include patients and their families in the process.
Sustainable materials management using the Leaching Environmental Assessment Framework test methods
The need for improved leach tests became a priority due to adoption of more stringent air pollution control at U.S. coal-fired power plants resulting in the preferential partitioning of mercury (Hg) and other pollutants to fly ash and other air pollution control residues. Fly ash...
"Between the Lions": Using Television To Promote Literacy.
ERIC Educational Resources Information Center
Rath, Linda K.
2000-01-01
Describes a new children's television series on PBS that was developed to teach literacy by emphasizing reading and writing. Topics include the multimedia approach; and curriculum priorities, including showing benefits of access to print materials, the value of learning to read and write, and introducing new vocabulary words. (LRW)
Atmospheric Pollution: Its Origins and Prevention.
ERIC Educational Resources Information Center
Meetham, A. R.
Although atmospheric pollution can be reduced or eliminated in many different ways, each way involves questions of economics, the time factor, availability of materials, priority over other urgent reforms, and individual and social psychology. To provide a basis for consideration of these questions, this book gives information not only about the…
10 CFR 216.6 - Petition for reconsideration.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 10 Energy 3 2012-01-01 2012-01-01 false Petition for reconsideration. 216.6 Section 216.6 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... in the application are critical and essential to an eligible energy program or project, it will so...
10 CFR 216.6 - Petition for reconsideration.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 10 Energy 3 2011-01-01 2011-01-01 false Petition for reconsideration. 216.6 Section 216.6 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... in the application are critical and essential to an eligible energy program or project, it will so...
10 CFR 216.5 - Notification of findings.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 10 Energy 3 2014-01-01 2014-01-01 false Notification of findings. 216.5 Section 216.5 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... are critical and essential to an eligible energy program or project, and in such cases will forward to...
10 CFR 216.5 - Notification of findings.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 3 2013-01-01 2013-01-01 false Notification of findings. 216.5 Section 216.5 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... are critical and essential to an eligible energy program or project, and in such cases will forward to...
10 CFR 216.5 - Notification of findings.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 10 Energy 3 2012-01-01 2012-01-01 false Notification of findings. 216.5 Section 216.5 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... are critical and essential to an eligible energy program or project, and in such cases will forward to...
10 CFR 216.5 - Notification of findings.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 10 Energy 3 2011-01-01 2011-01-01 false Notification of findings. 216.5 Section 216.5 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... are critical and essential to an eligible energy program or project, and in such cases will forward to...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-11-21
... posted without change to the Federal Docket Management System (FDMS), including any personal information... effectiveness; 2. Determine the need for regulatory changes to address changing transportation safety problems; 3. Identify major problem or risk areas that should receive priority attention; 4. Chart trends; 5...
Developmental Book Activities and Needs in Thailand.
ERIC Educational Resources Information Center
Barnett, Stanley A.; And Others
A three week survey was conducted to: (1) investigate the state of developmental book acitivity in Thailand, (2) determine the priority of Thailand's book needs, (3) develop program recommendations to meet the needs and (4) formulate regional recommendations. Recommendations on materials and methods needed are: (1) development of a comprehensive…
Major Threats to Environmental Quality in North America.
ERIC Educational Resources Information Center
Vogl, Robert; And Others
1986-01-01
Reports study findings of environmental educators' opinions on issues which pose threats to environmental quality in North America and the status of the availability of educational materials for the issues. Identified as priority items were hazardous wastes management, water contamination, and acid deposition. Compares responses of American and…
E. H. Butler Library Disaster Response Plan. Third Edition.
ERIC Educational Resources Information Center
State Univ. of New York, Buffalo. Coll. at Buffalo.
The purpose of this plan is to minimize the potential for disaster and to minimize damage to materials if a disaster should occur. It contains: emergency instructions; evacuation procedures; a disaster contact list; and sections on salvage priorities, prevention, protection, response, recovery, rehabilitation, disaster team responsibilities,…
Haitian Creole via Total Physical Response; An Introduction.
ERIC Educational Resources Information Center
Lafayette, Robert C.; Zephir, Flore
The instructional materials for introductory instruction in Haitian Creole are designed for use with the Total Physical Response method of second language teaching, with priority placed on listening comprehension before production and on internalization of physical activities during use of the language. The text consists of 24 chapters targeting…
Checking Studies on Zones of Siting Feasibility for Dredged Material in Puget Sound.
1986-01-01
priority pollutants in the ZSFs including copper, lead, mercury , HPAH, LPAH, PCBs and DDT. The area around Fourmile Rock dump site was classified in a...sediment contains ferric hydroxide (an olive color when associated with organic particles), while the reduced hydrogen sulphide sediments below this
10 CFR 216.5 - Notification of findings.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 3 2010-01-01 2010-01-01 false Notification of findings. 216.5 Section 216.5 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... are critical and essential to an eligible energy program or project, and in such cases will forward to...
10 CFR 216.6 - Petition for reconsideration.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 10 Energy 3 2010-01-01 2010-01-01 false Petition for reconsideration. 216.6 Section 216.6 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... in the application are critical and essential to an eligible energy program or project, it will so...
10 CFR 216.6 - Petition for reconsideration.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 10 Energy 3 2014-01-01 2014-01-01 false Petition for reconsideration. 216.6 Section 216.6 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... in the application are critical and essential to an eligible energy program or project, it will so...
10 CFR 216.6 - Petition for reconsideration.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 3 2013-01-01 2013-01-01 false Petition for reconsideration. 216.6 Section 216.6 Energy DEPARTMENT OF ENERGY OIL MATERIALS ALLOCATION AND PRIORITY PERFORMANCE UNDER CONTRACTS OR ORDERS TO MAXIMIZE... in the application are critical and essential to an eligible energy program or project, it will so...
Auto Technician: An Instructional Guide for Teachers.
ERIC Educational Resources Information Center
Ohio State Univ., Columbus. Vocational Instructional Materials Lab.
This guide is designed to help teachers in automotive technician programs for grades 11 and 12 teach the critical competencies of the program. The critical competencies covered are the Priority 1 competencies in Ohio Occupational Competency Assessment Profile (OCAP) for Automotive Technician. Teacher materials include program/instructor resources,…
NASA Astrophysics Data System (ADS)
Bulei, C.; Todor, M. P.; Heput, T.; Kiss, I.
2018-01-01
The management of waste from used tires is one of the major principles of recycling and reuse, which involves encouraging a high level of material recovery components, preferably by recycling. Given the current pressure on natural resources on a global scale we must fully take into account the waste in a broader framework defined by the flow of raw materials and their sustainable use. Thus, the opportunity to use various waste from used tires as raw material in order to support economic activities becomes a priority. The recycling of raw materials from waste products and their use in new production processes for their material capitalization is becoming a sustainable approach. Used tire recycling, is the process of recycling waste tires that are no longer suitable for use on vehicles due to wear or irreparable damage. These tires are a problematic source of waste, due to the large volume produced, the durability of the tires, and the components in the tire that are ecologically problematic. Although tires are usually burnt, not recycled, efforts are continuing to find value. Tires can be recycled into, among other things, typically as crumb rubber modifier in recycled pavement. The paper presents aspects of the product resulting from crushing of used tires (powder), which can be used properly valued in the street furniture field or building materials containing rubber.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Johnson, D.R.; McClung, R.W.; Janney, M.A.
1987-08-01
A needs assessment was performed for nondestructive testing and materials characterization to achieve improved reliability in ceramic materials for heat engine applications. Raw materials, green state bodies, and sintered ceramics were considered. The overall approach taken to improve reliability of structural ceramics requires key inspections throughout the fabrication flowsheet, including raw materials, greed state, and dense parts. The applications of nondestructive inspection and characterization techniques to ceramic powders and other raw materials, green ceramics, and sintered ceramics are discussed. The current state of inspection technology is reviewed for all identified attributes and stages of a generalized flowsheet for advanced structuralmore » ceramics, and research and development requirements are identified and listed in priority order. 164 refs., 3 figs.« less
Our Health Is in Our Hands: A Social Marketing Campaign to Combat Obesity and Diabetes.
George, Kimberly S; Roberts, Calpurnyia B; Beasley, Stephen; Fox, Margaretta; Rashied-Henry, Kweli
2016-03-01
Design, implement, and evaluate a 6-week social marketing campaign (SMC) to raise awareness of obesity and increase involvement in type 2 diabetes prevention, nutrition, and fitness programs offered by the Brooklyn Partnership to Drive Down Diabetes (BP3D) in two low-income, urban communities. This was a nonexperimental, formative research, mixed-methods study. The study took place in Central Brooklyn and East New York, two of the most impoverished, high-need communities in New York City. Participants were black and Hispanic adults, who were 18+ years of age and residing in the priority communities. Advertisements in English and Spanish encouraging healthier eating habits and advocating for better food options were displayed on New York City bus shelters, buses, and subway cars operating in the priority communities. Social media, Web sites, and print material were used to promote the campaign message. Social media metrics and a street intercept postsurvey informed the campaign's success. Quantitative data were analyzed using descriptive statistics. One hundred advertisements in English and Spanish were posted. After an 18-month followup, there were over 11,000 visits to the Facebook page. Results from the postsurvey (n = 171) suggest the SMC motivated participants who recognized the advertisements to improve their health behaviors. A multifaceted SMC that coincides with prevention programs can effectively raise attention to health issues and activities in a high-risk population at a relatively low cost. © The Author(s) 2016.
Halloysite-derived nitrogen doped carbon electrocatalysts for anion exchange membrane fuel cells
NASA Astrophysics Data System (ADS)
Lu, Yaxiang; Wang, Lianqin; Preuß, Kathrin; Qiao, Mo; Titirici, Maria-Magdalena; Varcoe, John; Cai, Qiong
2017-12-01
Developing the low-cost, highly active carbonaceous materials for oxygen reduction reaction (ORR) catalysts has been a high-priority research direction for durable fuel cells. In this paper, two novel N-doped carbonaceous materials with flaky and rod-like morphology using the natural halloysite as template are obtained from urea nitrogen source as well as glucose (denoted as GU) and furfural (denoted as FU) carbon precursors, respectively, which can be directly applied as metal-free electrocatalysts for ORR in alkaline electrolyte. Importantly, compared with a benchmark Pt/C (20wt%) catalyst, the as-prepared carbon catalysts demonstrate higher retention in diffusion limiting current density (after 3000 cycles) and enhanced methanol tolerances with only 50-60mV negative shift in half-wave potentials. In addition, electrocatalytic activity, durability and methanol tolerant capability of the two N-doped carbon catalysts are systematically evaluated, and the underneath reasons of the outperformance of rod-like catalysts over the flaky are revealed. At last, the produced carbonaceous catalysts are also used as cathodes in the single cell H2/O2 anion exchange membrane fuel cell (AEMFC), in which the rod-like FU delivers a peak power density as high as 703 mW cm-2 (vs. 1106 mW cm-2 with a Pt/C benchmark cathode catalyst).
DOE Office of Scientific and Technical Information (OSTI.GOV)
M. Ono, M. Jaworski, R. Kaita, C. N. Skinner, J.P. Allain, R. Maingi, F. Scotti, V.A. Soukhanovskii, and the NSTX-U Team
Developing a reactor compatible divertor and managing the associated plasma material interaction (PMI) has been identified as a high priority research area for magnetic confinement fusion. Accordingly on NSTXU, the PMI research has received a strong emphasis. With ~ 15 MW of auxiliary heating power, NSTX-U will be able to test the PMI physics with the peak divertor plasma facing component (PFC) heat loads of up to 40-60 MW/m2 . To support the PMI research, a comprehensive set of PMI diagnostic tools are being implemented. The snow-flake configuration can produce exceptionally high divertor flux expansion of up to ~ 50.more » Combined with the radiative divertor concept, the snow-flake configuration has reduced the divertor heat flux by an order of magnitude in NSTX. Another area of active PMI investigation is the effect of divertor lithium coating (both in solid and liquid phases). The overall NSTX lithium PFC coating results suggest exciting opportunities for future magnetic confinement research including significant electron energy confinement improvements, Hmode power threshold reduction, the control of Edge Localized Modes (ELMs), and high heat flux handling. To support the NSTX-U/PPPL PMI research, there are also a number of associated PMI facilities implemented at PPPL/Princeton University including the Liquid Lithium R&D facility, Lithium Tokamak Experiment, and Laboratories for Materials Characterization and Surface Chemistry.« less
Processing and Properties of Airframe Materials.
1987-06-01
size to develop a composite with 61% fine grains mixed with 39% coarse grains by volume. The stack was placed inside a stainless steel vacuum bag and...alloys, considerable interest exists for superplastic forming of the alloys. However, the first order priority is to consolidate a void- free and...1o- 0 1 5 " 20 25 Oelto K. bPa (sqrt(m)) Fig. 3.3-38 Secondary cracking vs AK, forged material, as-forged, heat treatment No. 2, including load shed
United States Automotive Materials Partnership LLC (USAMP)
DOE Office of Scientific and Technical Information (OSTI.GOV)
United States Automotive Materials Partnership
2011-01-31
The United States Automotive Materials Partnership LLC (USAMP) was formed in 1993 as a partnership between Chrysler Corporation, Ford Motor Company, and General Motors Corporation. Since then the U.S. Department of Energy (DOE) has supported its activities with funding and technical support. The mission of the USAMP is to conduct vehicle-oriented research and development in materials and materials processing to improve the competitiveness of the U.S. Auto Industry. Its specific goals are: (1) To conduct joint research to further the development of lightweight materials for improved automotive fuel economy; and (2) To work with the Federal government to explore opportunitiesmore » for cooperative programs with the national laboratories, Federal agencies such as the DOE and universities. As a major component of the DOE's Office of FreedomCAR and Vehicle Technologies Program (FCVT) collaboration with the USAMP, the Automotive Lightweighting Materials (ALM) program focuses on the development and validation of advanced materials and manufacturing technologies to significantly reduce automotive vehicle body and chassis weight without compromising other attributes such as safety, performance, recyclability, and cost. The FCVT was announced in FY 2002 and implemented in FY 2003, as a successor of the Partnership for a New Generation of Vehicles (PNGV), largely addressed under the first Cooperative Agreement. This second USAMP Cooperative Agreement with the DOE has expanded a unique and valuable framework for collaboratively directing industry and government research efforts toward the development of technologies capable of solving important societal problems related to automobile transportation. USAMP efforts are conducted by the domestic automobile manufacturers, in collaboration with materials and manufacturing suppliers, national laboratories, universities, and other technology or trade organizations. These interactions provide a direct route for implementing newly developed materials and technologies, and have resulted in significant technical successes to date, as discussed in the individual project summary final reports. Over 70 materials-focused projects have been established by USAMP, in collaboration with participating suppliers, academic/non-profit organizations and national laboratories, and executed through its original three divisions: the Automotive Composites Consortium (ACC), the Automotive Metals Division (AMD), and Auto/Steel Partnership (A/SP). Two new divisions were formed by USAMP in 2006 to drive research emphasis on integration of structures incorporating dissimilar lightweighting materials, and on enabling technology for nondestructive evaluation of structures and joints. These new USAMP divisions are: Multi-Material Vehicle Research and Development Initiative (MMV), and the Non-Destructive Evaluation Steering Committee (NDE). In cooperation with USAMP and the FreedomCAR Materials Technical Team, a consensus process has been established to facilitate the development of projects to help move leveraged research to targeted development projects that eventually migrate to the original equipment manufacturers (OEMs) as application engineering projects. Research projects are assigned to one of three phases: concept feasibility, technical feasibility, and demonstration feasibility. Projects are guided through ongoing monitoring and USAMP offsite reviews, so as to meet the requirements of each phase before they are allowed to move on to the next phase. As progress is made on these projects, the benefits of lightweight construction and enabling technologies will be transferred to the supply base and implemented in production vehicles. The single greatest barrier to automotive use of lightweight materials is their high cost; therefore, priority is given to activities aimed at reducing costs through development of new materials, forming technologies, and manufacturing processes. The emphasis of the research projects reported in this document was largely on applied research and evaluation of mass savings opportunities through the aggressive application of lightweight materials, advanced computational methods, and the demonstration of production capable manufacturing processes intended for high-volume applications, all directed towards the FreedomCAR Program goals. Priority lightweighting materials include advanced high-strength steels (AHSS), aluminum, magnesium, titanium, and composites such as metal-matrix materials, and glass- and carbon-fiber-reinforced thermosets and thermoplastics. Besides developing valuable new design and material property information, several projects have extensively used computer-based product modeling and simulation technologies to optimize designs and materials usage while addressing the cost-performance issues. The purpose of this Summary Final Closeout Report is to document the successes, degree of progress, technology dissemination efforts, and lessons learned.« less
2013-01-01
Background The aim of this paper was the validation of a new analytical method based on the high-resolution continuum source flame atomic absorption spectrometry for the fast-sequential determination of several hazardous/priority hazardous metals (Ag, Cd, Co, Cr, Cu, Ni, Pb and Zn) in soil after microwave assisted digestion in aqua regia. Determinations were performed on the ContrAA 300 (Analytik Jena) air-acetylene flame spectrometer equipped with xenon short-arc lamp as a continuum radiation source for all elements, double monochromator consisting of a prism pre-monocromator and an echelle grating monochromator, and charge coupled device as detector. For validation a method-performance study was conducted involving the establishment of the analytical performance of the new method (limits of detection and quantification, precision and accuracy). Moreover, the Bland and Altman statistical method was used in analyzing the agreement between the proposed assay and inductively coupled plasma optical emission spectrometry as standardized method for the multielemental determination in soil. Results The limits of detection in soil sample (3σ criterion) in the high-resolution continuum source flame atomic absorption spectrometry method were (mg/kg): 0.18 (Ag), 0.14 (Cd), 0.36 (Co), 0.25 (Cr), 0.09 (Cu), 1.0 (Ni), 1.4 (Pb) and 0.18 (Zn), close to those in inductively coupled plasma optical emission spectrometry: 0.12 (Ag), 0.05 (Cd), 0.15 (Co), 1.4 (Cr), 0.15 (Cu), 2.5 (Ni), 2.5 (Pb) and 0.04 (Zn). Accuracy was checked by analyzing 4 certified reference materials and a good agreement for 95% confidence interval was found in both methods, with recoveries in the range of 94–106% in atomic absorption and 97–103% in optical emission. Repeatability found by analyzing real soil samples was in the range 1.6–5.2% in atomic absorption, similar with that of 1.9–6.1% in optical emission spectrometry. The Bland and Altman method showed no statistical significant difference between the two spectrometric methods for 95% confidence interval. Conclusions High-resolution continuum source flame atomic absorption spectrometry can be successfully used for the rapid, multielemental determination of hazardous/priority hazardous metals in soil with similar analytical performances to those in inductively coupled plasma optical emission spectrometry. PMID:23452327
Frentiu, Tiberiu; Ponta, Michaela; Hategan, Raluca
2013-03-01
The aim of this paper was the validation of a new analytical method based on the high-resolution continuum source flame atomic absorption spectrometry for the fast-sequential determination of several hazardous/priority hazardous metals (Ag, Cd, Co, Cr, Cu, Ni, Pb and Zn) in soil after microwave assisted digestion in aqua regia. Determinations were performed on the ContrAA 300 (Analytik Jena) air-acetylene flame spectrometer equipped with xenon short-arc lamp as a continuum radiation source for all elements, double monochromator consisting of a prism pre-monocromator and an echelle grating monochromator, and charge coupled device as detector. For validation a method-performance study was conducted involving the establishment of the analytical performance of the new method (limits of detection and quantification, precision and accuracy). Moreover, the Bland and Altman statistical method was used in analyzing the agreement between the proposed assay and inductively coupled plasma optical emission spectrometry as standardized method for the multielemental determination in soil. The limits of detection in soil sample (3σ criterion) in the high-resolution continuum source flame atomic absorption spectrometry method were (mg/kg): 0.18 (Ag), 0.14 (Cd), 0.36 (Co), 0.25 (Cr), 0.09 (Cu), 1.0 (Ni), 1.4 (Pb) and 0.18 (Zn), close to those in inductively coupled plasma optical emission spectrometry: 0.12 (Ag), 0.05 (Cd), 0.15 (Co), 1.4 (Cr), 0.15 (Cu), 2.5 (Ni), 2.5 (Pb) and 0.04 (Zn). Accuracy was checked by analyzing 4 certified reference materials and a good agreement for 95% confidence interval was found in both methods, with recoveries in the range of 94-106% in atomic absorption and 97-103% in optical emission. Repeatability found by analyzing real soil samples was in the range 1.6-5.2% in atomic absorption, similar with that of 1.9-6.1% in optical emission spectrometry. The Bland and Altman method showed no statistical significant difference between the two spectrometric methods for 95% confidence interval. High-resolution continuum source flame atomic absorption spectrometry can be successfully used for the rapid, multielemental determination of hazardous/priority hazardous metals in soil with similar analytical performances to those in inductively coupled plasma optical emission spectrometry.
NASA Astrophysics Data System (ADS)
Susiloningtyas, Dewi; Handayani, Tuty; Amalia, Naila; Nadhira, Arum Ira
2017-01-01
After 2004 tsunami, lots of efforts have been made, such as building school and distributing mangrove forests. This study examines the perception of teachers and students about mangrove management which spread in the administrative area of Lhokseumawe to become a reference then applied as local education regarding mangrove after tsunami disaster. This paper was based on primary data taken using questionnaire with a predetermined analysis unit to interview teachers and students in the study area. The result presented with quantitative and descriptive analysis. The result is of the total number of junior high schools in the city of Lhokseumawe as many as 41 Public Schools, Private and Religious School, there are 31 schools with priority for local wisdom education implemented mangrove. The result is classified with 3 class. The school’s first priority is schools with a melee, with mangroves mangrove poor condition. Educational priority 2 is schools with close proximity to the mangrove and mangrove condition with moderate levels of damage. Schools with third priority are school with a close range, and mangrove good condition. Priority I as many as 18 schools, 10 schools priority II and 3 school for priority with learning competency standards that differ from each other.
Madi, Banyana Cecilia; Hussein, Julia; Hounton, Sennen; D'Ambruoso, Lucia; Achadi, Endang; Arhinful, Daniel Kojo
2007-09-01
A participatory approach to priority setting in programme evaluation may help improve the allocation and more efficient use of scarce resources especially in low-income countries. Research agendas that are the result of collaboration between researchers, programme managers, policy makers and other stakeholders have the potential to ensure rigorous studies are conducted on matters of local priority, based on local, expert knowledge. This paper describes a process involving key stakeholders to elicit and prioritise evaluation needs for safe motherhood in three developing countries. A series of reiterative consultations with safe motherhood stakeholders from each country was conducted over a period of 36 months. In each country, the consultation process consisted of a series of participatory workshops; firstly, stakeholder's views on evaluation were elicited with parallel descriptive work on the contexts. Secondly, priorities for evaluation were identified from stakeholders; thirdly, the evaluation-priorities were refined; and finally, the evaluation research questions, reflecting the identified priorities, were agreed and finalised. Three evaluation-questions were identified in each country, and one selected, on which a full scale evaluation was undertaken. While there is a great deal written about the importance of transparent and participatory priority setting in evaluation; few examples of how such processes could be implemented exist, particularly for maternal health programmes. Our experience demonstrates that the investment in a participatory priority-setting effort is high but the process undertaken resulted in both globally and contextually-relevant priorities for evaluation. This experience provides useful lessons for public health practitioners committed to bridging the research-policy interface.
2018-01-01
Rapid urbanization and agricultural development has resulted in the degradation of ecosystems, while also negatively impacting ecosystem services (ES) and urban sustainability. Identifying conservation priorities for ES and applying reasonable management strategies have been found to be effective methods for mitigating this phenomenon. The purpose of this study is to propose a comprehensive framework for identifying ES conservation priorities and associated management strategies for these planning areas. First, we incorporated 10 ES indicators within a systematic conservation planning (SCP) methodology in order to identify ES conservation priorities with high irreplaceability values based on conservation target goals associated with the potential distribution of ES indicators. Next, we assessed the efficiency of the ES conservation priorities for meeting the designated conservation target goals. Finally, ES conservation priorities were clustered into groups using a K-means clustering analysis in an effort to identify the dominant ES per location before formulating management strategies. We effectively identified 12 ES priorities to best represent conservation target goals for the ES indicators. These 12 priorities had a total areal coverage of 13,364 km2 representing 25.16% of the study area. The 12 priorities were further clustered into five significantly different groups (p-values between groups < 0.05), which helped to refine management strategies formulated to best enhance ES across the study area. The proposed method allows conservation and management plans to easily adapt to a wide variety of quantitative ES target goals within urban and agricultural areas, thereby preventing urban and agriculture sprawl and guiding sustainable urban development. PMID:29682412
Qu, Yi; Lu, Ming
2018-01-01
Rapid urbanization and agricultural development has resulted in the degradation of ecosystems, while also negatively impacting ecosystem services (ES) and urban sustainability. Identifying conservation priorities for ES and applying reasonable management strategies have been found to be effective methods for mitigating this phenomenon. The purpose of this study is to propose a comprehensive framework for identifying ES conservation priorities and associated management strategies for these planning areas. First, we incorporated 10 ES indicators within a systematic conservation planning (SCP) methodology in order to identify ES conservation priorities with high irreplaceability values based on conservation target goals associated with the potential distribution of ES indicators. Next, we assessed the efficiency of the ES conservation priorities for meeting the designated conservation target goals. Finally, ES conservation priorities were clustered into groups using a K-means clustering analysis in an effort to identify the dominant ES per location before formulating management strategies. We effectively identified 12 ES priorities to best represent conservation target goals for the ES indicators. These 12 priorities had a total areal coverage of 13,364 km 2 representing 25.16% of the study area. The 12 priorities were further clustered into five significantly different groups ( p -values between groups < 0.05), which helped to refine management strategies formulated to best enhance ES across the study area. The proposed method allows conservation and management plans to easily adapt to a wide variety of quantitative ES target goals within urban and agricultural areas, thereby preventing urban and agriculture sprawl and guiding sustainable urban development.
Mshana, Simon; Shemilu, Haji; Ndawi, Benedict; Momburi, Roman; Olsen, Oystein Evjen; Byskov, Jens; Martin, Douglas K
2007-01-01
Background Priority setting in every health system is complex and difficult. In less wealthy countries the dominant approach to priority setting has been Burden of Disease (BOD) and cost-effectiveness analysis (CEA), which is helpful, but insufficient because it focuses on a narrow range of values – need and efficiency – and not the full range of relevant values, including legitimacy and fairness. 'Accountability for reasonableness' is a conceptual framework for legitimate and fair priority setting and is empirically based and ethically justified. It connects priority setting to broader, more fundamental, democratic deliberative processes that have an impact on social justice and equity. Can 'accountability for reasonableness' be helpful for improving priority setting in less wealthy countries? Methods In 2005, Tanzanian scholars from the Primary Health Care Institute (PHCI) conducted 6 capacity building workshops with senior health staff, district planners and managers, and representatives of the Tanzanian Ministry of Health to discussion improving priority setting in Tanzania using 'accountability for reasonableness'. The purpose of this paper is to describe this initiative and the participants' views about the approach. Results The approach to improving priority setting using 'accountability for reasonableness' was viewed by district decision makers with enthusiastic favour because it was the first framework that directly addressed their priority setting concerns. High level Ministry of Health participants were also very supportive of the approach. Conclusion Both Tanzanian district and governmental health planners viewed the 'accountability for reasonableness' approach with enthusiastic favour because it was the first framework that directly addressed their concerns. PMID:17997824
Supply chain risk management in newspaper company: House of risk approach
NASA Astrophysics Data System (ADS)
Ratnasari, Sintya; Hisjam, Muhammad; Sutopo, Wahyudi
2018-02-01
In the supply chain (SC) of newspapers, the printing company is the main entity that has several processes, i.e. procure raw materials, print plate and newspapers, and also distribute newspaper to consumers. The existing risks in the newspaper printing company are quite high. A wide range of disturbances or risks needs to be identified to map out the characteristics of the risk sources that will impact on the performance of the supply chain. Therefore, the printing companies need to manage their supply chain risk of the five major SC processes (such as plan, source, deliver, make, and return). In a case study of a newspaper company in Surakarta, the company have not implemented a risk management process that affects the company. This study is aimed to map the risks in the printing company and formulate risk mitigation alternatives to mitigate the risks. The house of risk (HOR) method was chosen to select a set of proactive actions deemed cost-effective in managing SC Risks in the newspaper company. The model consisting of two stages, the first stage (HOR1) was done by identifying risk, risk causing agents and then measured the severity and occurrences to calculate the Aggregate Risk Priority (ARP) value. The second stage (HOR2) is intended to formulate and prioritize the action of mitigation that the company should pursue to reduce the probability of risk agents to occur. The result shows that the innovative model of HOR in Newspaper Company was presented. There are 24 risk events, 20 causing agents and two priority risks in HOR1. The HOR 2 was proposed 9 ranks of mitigation strategy for priority risk agents, from the easiest to the hardest strategy for the company to implement it.
Structuring Cooperative Nuclear RIsk Reduction Initiatives with China.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Brandt, Larry; Reinhardt, Jason Christian; Hecker, Siegfried
The Stanford Center for International Security and Cooperation engaged several Chinese nuclear organizations in cooperative research that focused on responses to radiological and nuclear terrorism. The objective was to identify joint research initiatives to reduce the global dangers of such threats and to pursue initial technical collaborations in several high priority areas. Initiatives were identified in three primary research areas: 1) detection and interdiction of smuggled nuclear materials; 2) nuclear forensics; and 3) radiological (“dirty bomb”) threats and countermeasures. Initial work emphasized the application of systems and risk analysis tools, which proved effective in structuring the collaborations. The extensive engagementsmore » between national security nuclear experts in China and the U.S. during the research strengthened professional relationships between these important communities.« less
Mineral Mapping Using AVIRIS Data at Ray Mine, AZ
NASA Technical Reports Server (NTRS)
McCubbin, Ian; Lang, Harold; Green, Robert O.; Roberts, Dar
1998-01-01
Imaging Spectroscopy enables the identification and mapping of surface mineralogy over large areas. This study focused on assessing the utility of Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data for environmental impact analysis over the Environmental Protection Agency's (EPA) high priority Superfund site Ray Mine, AZ. Using the Spectral Angle Mapper (SAM) algorithm to analyze AVIRIS data makes it possible to map surface materials that are indicative of acid generating minerals. The improved performance of the AVIRIS sensor since 1996 provides data with sufficient signal to noise ratio to characterize up to 8 image endmembers. Specifically we employed SAM to map minerals associated with mine generated acid waste, namely jarositc, goethite, and hematite, in the presence of a complex mineralogical background.
Fluids and Materials Science Studies Utilizing the Microgravity-vibration Isolation Mount (MIM)
NASA Technical Reports Server (NTRS)
Herring, Rodney; Tryggvason, Bjarni; Duval, Walter
1998-01-01
Canada's Microgravity Sciences Program (MSP) is the smallest program of the ISS partners and so can participate in only a few, highly focused projects in order to make a scientific and technological impact. One focused project involves determining the effect of accelerations (g-jitter) on scientific measurements in a microgravity environment utilizing the Microgravity-vibration Isolation Mount (MIM). Many experiments share the common characteristic of having a fluid stage in their process. The quality of the experimental measurements have been expected to be affected by g-jitters which has lead the ISS program to include specifications to limit the level of acceleration allowed on a subset of experimental racks. From finite element analysis (FEM), the ISS structure will not be able to meet the acceleration specifications. Therefore, isolation systems are necessary. Fluid science results and materials science results show significant sensitivity to g-jitter. The work done to date should be viewed only as a first look at the issue of g-jitter sensitivity. The work should continue with high priority such that the international science community and the ISS program can address the requirement and settle on an agreed to overall approach as soon as possible.
NASA Technical Reports Server (NTRS)
Schnopper, Herbert W.; Barbera, Marco; Silver, Eric; Ingram, Russell; Christensen, Finn E.; Romaine, Suzanne; Cohen, Lester; Collura, Alfonso; Murray, Stephen S.; Brinton, John C. (Technical Monitor)
2002-01-01
We present results from a program to develop an X-ray telescope made from thin plastic shells. Our initial results have been obtained from multi-shell cylindrical lenses that are used in a point-to-point configuration to image the small focal spot of a an X-ray tube on a microchannel plate detector. We describe the steps that led up to the present design and present data from the tests that have been used to identify the properties of the plastic material that make it a suitable X-ray reflector. We discuss two applications of our technology to X-ray missions that are designed to address some of the scientific priorities set forth in NASA's long term plans for high energy astrophysics. One mission will observe in the 1 - 10 keV band, the other will extend up to ca. 100 keV.
Hirth, Sabine; Cena, Lorenzo; Cox, Gerhard; Tomović, Zeljko; Peters, Thomas; Wohlleben, Wendel
2013-04-01
Nanocomposite materials may be considered as a low-risk application of nanotechnology, if the nanofillers remain embedded throughout the life-cycle of the products in which they are embedded. We hypothesize that release of free CNTs occurs by a combination of mechanical stress and chemical degradation of the polymer matrix. We experimentally address limiting cases: Mechanically released fragments may show tubular protrusions on their surface. Here we identify these protrusions unambiguously as naked CNTs by chemically resolved microscopy and a suitable preparation protocol. By size-selective quantification of fragments we establish as a lower limit that at least 95 % of the CNTs remain embedded. Contrary to classical fiber composite approaches, we link this phenomenon to matrix materials with only a few percent elongation at break, predicting which materials should still cover their CNT nanofillers after machining. Protruding networks of CNTs remain after photochemical degradation of the matrix, and we show that it takes the worst case combinations of weathering plus high-shear wear to release free CNTs in the order of mg/m 2 /year. Synergy of chemical degradation and mechanical energy input is identified as the priority scenario of CNT release, but its lab simulation by combined methods is still far from real-world validation.
Is there an environmentally optimal separate collection rate?
Haupt, M; Waser, E; Würmli, J C; Hellweg, S
2018-04-20
Material recycling often leads to environmental benefits when compared to thermal treatments or landfilling and is therefore positioned in the waste hierarchy as the third priority after waste prevention and reuse. To assess the environmental impacts of recycling and the related substitution of primary material, linear steady-state models of physical flows are typically used. In reality, the environmental burdens of collection and recycling are likely to be a non-linear function of the collection rate. This short communication aims at raising awareness of the non-linear effects in separate collection systems and presents the first non-linear quantitative model for PET bottle recycling. The influence of collection rates on the material quality and the transport network is analyzed based on the data collected from industrial partners. The results highlight that in the present Swiss recycling system a very high collection rate close to 100% yields optimum environmental benefits with respect to global warming. The empirical data, however, provided indications for a decrease in the marginal environmental benefit of recycling. This can be seen as an indication that tipping points may exist for other recycling systems, in which the environmental benefits from substituting primary materials are less pronounced than they are for PET. Copyright © 2018 Elsevier Ltd. All rights reserved.
NASA Astrophysics Data System (ADS)
Barczak, Mariusz
2018-02-01
A series of pyridine-functionalized mesoporous silicas have been prepared for the first time via direct co-condensation of tetraethoxysilane (TEOS) and 2-(2-pyridyl)ethyltrimethoxysilane (PETS) using the block copolymer Pluronic P123 as a structure-directing agent. The obtained materials were fully characterized by a wide range of instrumental techniques and employed as adsorbents for the removal of a diclofenac which is considered a priority hazardous drug. The synthesized materials exhibit a high adsorption capacities and rapid adsorption rates. The structural and adsorption properties depend largely on the relative amount of PETS/TEOS ratio: the gradual degradation of ordered structure and porosity was observed with the increasing amount of PETS. However due to the highest loading of pyridine units the most structurally degraded material had the highest adsorption uptake (631 mg g-1) indicating that the surface chemistry plays - along with porosity - an important role in governing the adsorption process. The experimental adsorption data were modelled using the Langmuir, Freundlich and Langmuir-Freundlich isotherms - among them the Langmuir-Freundlich model turned out to be the most suitable for describing adsorption behaviour of diclofenac onto the materials. The collected data show that the pyridine-functionalized mesoporous silicas can be a promising absorbent of pharmaceuticals.
Health Care Priorities: Opinions of One State's Citizens and Legislators.
ERIC Educational Resources Information Center
Jankel, Charlotte A.; And Others
1994-01-01
Reports a study that examined the attitudes of Georgia citizens and legislators toward funding for specific health care services and national health insurance. Legislators were less in favor of national health insurance than were citizens. Both groups set a high priority on providing a wide range of health care services to everyone. (SM)
School Discipline Inequities Become a Federal Priority
ERIC Educational Resources Information Center
Zehr, Mary Ann
2010-01-01
Federal officials are getting the word out that addressing racial disparities in school discipline is a high priority, and they plan to use "disparate-impact analysis" in enforcing school discipline cases--a legal course of action that some civil rights lawyers contend was neglected under the administration of President George W. Bush. In…
ERIC Educational Resources Information Center
Root, Jenny R.; Knight, Victoria F.; Mims, Pamela J.
2017-01-01
Instruction in academic core content provides students with moderate to severe disabilities a full educational opportunity that promotes current and future options in the community and can complement acquisition of daily living skills. However, high school teachers face many challenges in balancing instructional priorities given the mission to…
The Influence of Nursing Faculty Workloads on Faculty Retention: A Case Study
ERIC Educational Resources Information Center
Wood, Jennifer J.
2013-01-01
Nursing faculty workloads have come to the forefront of discussion in nursing education. The National League of Nursing (NLN) has made nursing faculty workloads a high priority in nursing education. Included in the priorities are areas of creating reform through innovations in nursing education, evaluating reform through evaluation research, and…
The Priority of the Question: Focus Questions for Sustained Reasoning in Science
ERIC Educational Resources Information Center
Lustick, David
2010-01-01
Science education standards place a high priority on promoting the skills and dispositions associated with inquiry at all levels of learning. Yet, the questions teachers employ to foster sustained reasoning are most likely borrowed from a textbook, lab manual, or worksheet. Such generic questions generated for a mass audience, lack authenticity…
2007-10-01
Development of Phytostabilization/ Phytoremediation Growing Guides for Varying Geographic and Range Use Conditions...Demonstration Needs Critical Priority High Priority Development of Phytostabilization/ Phytoremediation Growing Guides for Varying Geographic and...several additional management and mitigation methods are in varying stages of research and development: surface soil amendments, phytoremediation , and
Durán, América P; Duffy, James P; Gaston, Kevin J
2014-10-07
Agroecosystems have traditionally been considered incompatible with biological conservation goals, and often been excluded from spatial conservation prioritization strategies. The consequences for the representativeness of identified priority areas have been little explored. Here, we evaluate these for biodiversity and carbon storage representation when agricultural land areas are excluded from a spatial prioritization strategy for South America. Comparing different prioritization approaches, we also assess how the spatial overlap of priority areas changes. The exclusion of agricultural lands was detrimental to biodiversity representation, indicating that priority areas for agricultural production overlap with areas of relatively high occurrence of species. By contrast, exclusion of agricultural lands benefits representation of carbon storage within priority areas, as lands of high value for agriculture and carbon storage overlap little. When agricultural lands were included and equally weighted with biodiversity and carbon storage, a balanced representation resulted. Our findings suggest that with appropriate management, South American agroecosystems can significantly contribute to biodiversity conservation. © 2014 The Author(s) Published by the Royal Society. All rights reserved.
Jovian system science issues and implications for a Mariner Jupiter Orbiter mission
NASA Technical Reports Server (NTRS)
Beckman, J. C.; Miner, E. D.
1975-01-01
Science goals for missions to Jupiter in the early 1980's are reviewed and a case is made for the science community to play the key role in assigning relative priorities for these goals. A reference set of measurement requirements and their priorities is established and those high priority goals that are most demanding on spacecraft and mission design are used to develop a reference mission concept. An orbiter mission is required to satisfy a majority of the measurements, and a spacecraft data handling capability as least equivalent to the Mariner Jupiter/Saturn spacecraft is the major system design driver. This reference Mission Concept is called Mariner Jupiter Orbiter. The remaining measurement requirements are reviewed in light of the potential science return of this mission, and certain options are developed to augment this science return. Two attractive options fulfill high priority objectives not achieved by the reference Mariner Jupiter Orbiter mission alone: an atmospheric entry probe, released prior to orbit insertion; and a daughter satellite dedicated to particle and fields measurements, ejected into an independent orbit about Jupiter.
Consensus and contention in the priority setting process: examining the health sector in Uganda.
Colenbrander, Sarah; Birungi, Charles; Mbonye, Anthony K
2015-06-01
Health priority setting is a critical and contentious issue in low-income countries because of the high burden of disease relative to the limited resource envelope. Many sophisticated quantitative tools and policy frameworks have been developed to promote transparent priority setting processes and allocative efficiency. However, low-income countries frequently lack effective governance systems or implementation capacity, so high-level priorities are not determined through evidence-based decision-making processes. This study uses qualitative research methods to explore how key actors' priorities differ in low-income countries, using Uganda as a case study. Human resources for health, disease prevention and family planning emerge as the common priorities among actors in the health sector (although the last of these is particularly emphasized by international agencies) because of their contribution to the long-term sustainability of health-care provision. Financing health-care services is the most disputed issue. Participants from the Ugandan Ministry of Health preferentially sought to increase net health expenditure and government ownership of the health sector, while non-state actors prioritized improving the efficiency of resource use. Ultimately it is apparent that the power to influence national health outcomes lies with only a handful of decision-makers within key institutions in the health sector, such as the Ministries of Health, the largest bilateral donors and the multilateral development agencies. These power relations reinforce the need for ongoing research into the paradigms and strategic interests of these actors. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine © The Author 2014; all rights reserved.
Mather, Mara; Clewett, David; Sakaki, Michiko; Harley, Carolyn W.
2018-01-01
Long Abstract Existing brain-based emotion-cognition theories fail to explain arousal’s ability to both enhance and impair cognitive processing. In the Glutamate Amplifies Noradrenergic Effects (GANE) model outlined in this paper, we propose that arousal-induced norepinephrine (NE) released from the locus coeruleus (LC) biases perception and memory in favor of salient, high priority representations at the expense of lower priority representations. This increase in gain under phasic arousal occurs via synaptic self-regulation of NE based on glutamate levels. When the LC is phasically active, elevated levels of glutamate at the site of prioritized representations increase local NE release, creating “NE hot spots.” At these local hot spots, glutamate and NE release are mutually enhancing and amplify activation of prioritized representations. This excitatory effect contrasts with widespread NE suppression of weaker representations via lateral and auto-inhibitory processes. On a broader scale, hot spots increase oscillatory synchronization across neural ensembles transmitting high priority information. Furthermore, key brain structures that detect or pre-determine stimulus priority interact with phasic NE release to preferentially route such information through large-scale functional brain networks. A surge of NE before, during or after encoding enhances synaptic plasticity at sites of high glutamate activity, triggering local protein synthesis processes that enhance selective memory consolidation. Together, these noradrenergic mechanisms increase perceptual and memory selectivity under arousal. Beyond explaining discrepancies in the emotion-cognition literature, GANE reconciles and extends previous influential theories of LC neuromodulation by highlighting how NE can produce such different outcomes in processing based on priority. PMID:26126507
Ethical Challenges in the Provision of Dialysis in Resource-Constrained Environments.
Luyckx, Valerie A; Miljeteig, Ingrid; Ejigu, Addisu M; Moosa, M Rafique
2017-05-01
The number of patients requiring dialysis by 2030 is projected to double worldwide, with the largest increase expected in low- and middle-income countries (LMICs). Dialysis is seldom considered a high priority by health care funders, consequently, few LMICs develop policies regarding dialysis allocation. Dialysis facilities may exist, but access remains highly inequitable in LMICs. High out-of-pocket payments make dialysis unsustainable and plunge many families into poverty. Patients, families, and clinicians suffer significant emotional and moral distress from daily life-and-death decisions imposed by dialysis. The health system's obligation to provide financial risk protection is an important component of global and national strategies to achieve universal health coverage. An ethical imperative therefore exists to develop transparent dialysis priority-setting guidelines to facilitate public understanding and acceptance of the realistic limits within the health system, and facilitate fair allocation of scarce resources. In this article, we present ethical challenges faced by patients, families, clinicians, and policy makers where dialysis is not universally accessible and discuss the potential ethical consequences of various dialysis allocation strategies. Finally, we suggest an ethical framework for use in policy development for priority setting of dialysis care. The accountability for reasonableness framework is proposed as a procedurally fair decision-making, priority-setting process. Copyright © 2017 Elsevier Inc. All rights reserved.
Building tobacco cessation capacity in the U.S.-affiliated Pacific Islands.
David, Annette M; Cruz, Peter J; Mercado, Susan P; Li, Dan
2013-09-01
Tobacco control stakeholders in priority populations are searching for culturally appropriate cessation training models to strengthen cessation capacity and infrastructure. We adapted the University of Arizona model for Brief Tobacco Cessation Interventions training for Pacific Islanders and pilot-tested it in four Pacific Islands-Palau, the Federated States of Micronesia, the Northern Mariana Islands and the Marshall Islands. All participants completed a posttraining knowledge assessment exam, pre- and posttraining confidence assessments, and a quality improvement evaluation. Of 70 participants, 65 (93%) completed the training. Forty-one (63%) passed the posttraining knowledge assessment exam at the first attempt; an additional 9 (14%) successfully passed on their second attempt, for a total pass rate of 77%. The pre- and posttraining confidence surveys demonstrated a statistically significant increase in confidence across all competency areas for delivering brief advice. The quality improvement survey revealed high acceptance and approval for the content and delivery of the locally adapted training model. As Pacific Island communities enact tobacco control policies, cessation demand is growing. The Guam cessation training model used culturally relevant data, materials, and training approaches and appeared effective in four different Pacific island countries. This underscores the importance of culturally competent adaptation of cessation training for priority populations such as Pacific Islanders.
Building Tobacco Cessation Capacity in the US-Affiliated Pacific Islands
David, Annette M.; Cruz, Peter J.; Mercado, Susan P.; Dan, Li
2013-01-01
Tobacco control stakeholders in priority populations are searching for culturally appropriate cessation training models to strengthen cessation capacity and infrastructure. We adapted the University of Arizona model for Brief Tobacco Cessation Interventions (BTI) training for Pacific Islanders and pilot-tested it in four Pacific Islands - Palau, the Federated States of Micronesia, the Northern Mariana Islands and the Marshall Islands. All participants completed a post-training knowledge assessment exam, pre- and post-confidence assessments and a quality improvement evaluation. Of 70 participants, 65 (93%) completed the training. Forty-one (63%) passed the post-training knowledge assessment exam at the 1st attempt; an additional 9 (14%) successfully passed on their 2nd attempt, for a total pass rate of 77%. The pre and post confidence surveys demonstrated a statistically significant increase in confidence across all competency areas for delivering brief advice. The quality improvement survey revealed high acceptance and approval for the content and delivery of the locally adapted training model. As Pacific Island communities enact tobacco control policies, cessation demand is growing. The Guam cessation training model used culturally relevant data, materials and training approaches and appeared effective in four different Pacific island countries. This underscores the importance of culturally competent adaptation of cessation training for priority populations like Pacific Islanders. PMID:23632079
Patients' desire for information about anaesthesia. Scottish and Canadian attitudes.
Lonsdale, M; Hutchison, G L
1991-05-01
Patients in Canada and Scotland were asked to complete a pre-operative questionnaire examining their desire for information relating to anaesthesia. In both Canada and Scotland, patients under the age of 50 years had a greater wish to receive information than those who were older (p less than 0.0001). In Canada, female patients were found to be more keen to receive pre-operative information than males of the same age group (p less than 0.05). The priority given to individual pieces of information was remarkably similar in both countries. Details of dangerous complications of anaesthesia and surgery were consistently rated of low priority, with high priority going to postoperative landmarks such as eating and drinking. Both countries rated meeting the anaesthetist before surgery as the highest priority of all.
2013-01-01
Background Determining the value of livestock breeds is essential to define conservation priorities, manage genetic diversity and allocate funds. Within- and between-breed genetic diversity need to be assessed to preserve the highest intra-specific variability. Information on genetic diversity and risk status is still lacking for many Creole cattle breeds from the Americas, despite their distinct evolutionary trajectories and adaptation to extreme environmental conditions. Methods A comprehensive genetic analysis of 67 Iberoamerican cattle breeds was carried out with 19 FAO-recommended microsatellites to assess conservation priorities. Contributions to global diversity were investigated using alternative methods, with different weights given to the within- and between-breed components of genetic diversity. Information on Iberoamerican plus 15 worldwide cattle breeds was used to investigate the contribution of geographical breed groups to global genetic diversity. Results Overall, Creole cattle breeds showed a high level of genetic diversity with the highest level found in breeds admixed with zebu cattle, which were clearly differentiated from all other breeds. Within-breed kinships revealed seven highly inbred Creole breeds for which measures are needed to avoid further genetic erosion. However, if contribution to heterozygosity was the only criterion considered, some of these breeds had the lowest priority for conservation decisions. The Weitzman approach prioritized highly differentiated breeds, such as Guabalá, Romosinuano, Cr. Patagonico, Siboney and Caracú, while kinship-based methods prioritized mainly zebu-related breeds. With the combined approaches, breed ranking depended on the weights given to the within- and between-breed components of diversity. Overall, the Creole groups of breeds were generally assigned a higher priority for conservation than the European groups of breeds. Conclusions Conservation priorities differed significantly according to the weight given to within- and between-breed genetic diversity. Thus, when establishing conservation programs, it is necessary to also take into account other features. Creole cattle and local isolated breeds retain a high level of genetic diversity. The development of sustainable breeding and crossbreeding programs for Creole breeds, and the added value resulting from their products should be taken into consideration to ensure their long-term survival. PMID:24079454
Setting Priorities for Diabetic Retinopathy Clinical Research and Identifying Evidence Gaps.
Le, Jimmy T; Hutfless, Susan; Li, Tianjing; Bressler, Neil M; Heyward, James; Bittner, Ava K; Glassman, Adam; Dickersin, Kay
2017-01-01
Prioritizing comparative effectiveness research may contribute to obtaining answers that clinicians perceive they need and may minimize research that could be considered wasteful. Our objective was to identify evidence gaps and set priorities for new systematic reviews and randomized controlled trials for managing diabetic retinopathy (DR), including diabetic macular edema (DME). Cross-sectional study. Diabetic Retinopathy Clinical Research Network (DRCR.net) investigators. We provided recommendations from the American Academy of Ophthalmology's 2012 Preferred Practice Patterns for Diabetic Retinopathy as 91 answerable clinical research questions about intervention effectiveness to 410 DRCR.net investigators to rate each question's importance from 0 (not important) to 10 (very important) using a 2-round Delphi survey and to suggest additional questions. We considered questions as high priority if at least 75% of respondents to both rounds assigned an importance rating of 5 or more in round 2. We also extracted outcome measures relevant to DR and asked respondents to identify those that must be measured in all studies. We mapped Cochrane reviews published up to March 2016 to high-priority clinical research questions. Ranking of importance of each clinical question. Thirty-two individuals completed rounds 1 and 2 and suggested 15 questions. Among the final list of 106 clinical research questions, 22 questions met our definition of high priority: 9 of 22 concerned the effectiveness of anti-VEGF therapy, and 13 of 22 focused on how often patients should be followed up (re-examination) and treatment effectiveness in patients with specific characteristics (e.g., DME). Outcomes that 75% or more of respondents marked as "must be measured in all studies" included visual acuity and visual loss, death of participants, and intraocular pressure. Only 1 prioritized question was associated with conclusive evidence from a Cochrane systematic review. A limited response rate among DRCR.net members identified 22 comparative effectiveness research questions as high priority for the management of DR, including DME, but few were associated with Cochrane reviews. These results support the need of systematic reviews and randomized controlled trials to address evidence gaps.
Ranson, Kent; Law, Tyler J; Bennett, Sara
2010-06-01
Donor funding for health systems financing (HSF) research is inadequate and often poorly aligned with national priorities. This study aimed to generate consensus about a core set of research issues that urgently require attention in order to facilitate policy development. There were three key inputs into the priority setting process: key-informant interviews with health policy makers, researchers, community and civil society representatives across twenty-four low- and middle-income countries in four regions; an overview of relevant reviews to identify research completed to date; and inputs from 12 key informants (largely researchers) at a consultative workshop. Nineteen priority research questions emerged from key-informant interviews. The overview of reviews was instructive in showing which health financing topics have had comparatively little written about them, despite being identified as important by key informants. The questions ranked as most important at the consultative workshop were: It is hoped that this work on HSF research priorities will complement calls for increased health systems research and evaluation by providing specific suggestions as to where new and existing research resources can best be invested. The list of high priority HSF research questions is being communicated to research funders and researchers in order to seek to influence global patterns of HSF research funding and activity. A "bottom up" approach to setting global research priorities such as that employed here should ensure that priorities are more sensitive to user needs. Copyright 2010 Elsevier Ltd. All rights reserved.
Manson, Robert H.; Ricketts, Taylor H.; Geissert, Daniel
2018-01-01
Payment for hydrological services (PHS) are popular tools for conserving ecosystems and their water-related services. However, improving the spatial targeting and impacts of PHS, as well as their ability to foster synergies with other ecosystem services (ES), remain challenging. We aimed at using spatial analyses to evaluate the targeting performance of México’s National PHS program in central Veracruz. We quantified the effectiveness of areas targeted for PHS in actually covering areas of high HS provision and social priority during 2003–2013. First, we quantified provisioning and spatial distributions of two target (water yield and soil retention), and one non-target ES (carbon storage) using InVEST. Subsequently, pairwise relationships among ES were quantified by using spatial correlation and overlap analyses. Finally, we evaluated targeting by: (i) prioritizing areas of individual and overlapping ES; (ii) quantifying spatial co-occurrences of these priority areas with those targeted by PHS; (iii) evaluating the extent to which PHS directly contribute to HS delivery; and (iv), testing if PHS targeted areas disproportionately covered areas with high ecological and social priority. We found that modelled priority areas exhibited non-random distributions and distinct spatial patterns. Our results show significant pairwise correlations between all ES suggesting synergistic relationships. However, our analysis showed a significantly lower overlap than expected and thus significant mismatches between PHS targeted areas and all types of priority areas. These findings suggest that the targeting of areas with high HS provisioning and social priority by Mexico’s PHS program could be improved significantly. This study underscores: (1) the importance of using maps of HS provisioning as main targeting criteria in PHS design to channel payments towards areas that require future conservation, and (2) the need for future research that helps balance ecological and socioeconomic targeting criteria. PMID:29462205
Faith, Daniel P
2008-12-01
New species conservation strategies, including the EDGE of Existence (EDGE) program, have expanded threatened species assessments by integrating information about species' phylogenetic distinctiveness. Distinctiveness has been measured through simple scores that assign shared credit among species for evolutionary heritage represented by the deeper phylogenetic branches. A species with a high score combined with a high extinction probability receives high priority for conservation efforts. Simple hypothetical scenarios for phylogenetic trees and extinction probabilities demonstrate how such scoring approaches can provide inefficient priorities for conservation. An existing probabilistic framework derived from the phylogenetic diversity measure (PD) properly captures the idea of shared responsibility for the persistence of evolutionary history. It avoids static scores, takes into account the status of close relatives through their extinction probabilities, and allows for the necessary updating of priorities in light of changes in species threat status. A hypothetical phylogenetic tree illustrates how changes in extinction probabilities of one or more species translate into changes in expected PD. The probabilistic PD framework provided a range of strategies that moved beyond expected PD to better consider worst-case PD losses. In another example, risk aversion gave higher priority to a conservation program that provided a smaller, but less risky, gain in expected PD. The EDGE program could continue to promote a list of top species conservation priorities through application of probabilistic PD and simple estimates of current extinction probability. The list might be a dynamic one, with all the priority scores updated as extinction probabilities change. Results of recent studies suggest that estimation of extinction probabilities derived from the red list criteria linked to changes in species range sizes may provide estimated probabilities for many different species. Probabilistic PD provides a framework for single-species assessment that is well-integrated with a broader measurement of impacts on PD owing to climate change and other factors.
Phylogenetically-informed priorities for amphibian conservation.
Isaac, Nick J B; Redding, David W; Meredith, Helen M; Safi, Kamran
2012-01-01
The amphibian decline and extinction crisis demands urgent action to prevent further large numbers of species extinctions. Lists of priority species for conservation, based on a combination of species' threat status and unique contribution to phylogenetic diversity, are one tool for the direction and catalyzation of conservation action. We describe the construction of a near-complete species-level phylogeny of 5713 amphibian species, which we use to create a list of evolutionarily distinct and globally endangered species (EDGE list) for the entire class Amphibia. We present sensitivity analyses to test the robustness of our priority list to uncertainty in species' phylogenetic position and threat status. We find that both sources of uncertainty have only minor impacts on our 'top 100' list of priority species, indicating the robustness of the approach. By contrast, our analyses suggest that a large number of Data Deficient species are likely to be high priorities for conservation action from the perspective of their contribution to the evolutionary history.
Top 40 priorities for science to inform conservation and management policy in the United States
Fleishman, Erica; Blockstein, David E.; Hall, John A.; Mascia, Michael B.; Rudd, Murray A.; Scott, J. Michael; Sutherland, William J.; Bartuska, Ann M.; Brown, A. Gordon; Christen, Catherine A.; Clement, Joel P.; DellaSala, Dominick; Duke, Clifford D.; Fiske, Shirley J.; Gosnell, Hannah; Haney, J. Christopher; Hutchins, Michael; Klein, Mary L.; Marqusee, Jeffrey; Noon, Barry R.; Nordgren, John R.; Orbuch, Paul M.; Powell, Jimmie; Quarles, Steven P.; Saterson, Kathryn A.; Stein, Bruce A.; Webster, Michael S.; Vedder, Amy
2011-01-01
To maximize the utility of research to decisionmaking, especially given limited financial resources, scientists must set priorities for their efforts. We present a list of the top 40 high-priority, multidisciplinary research questions directed toward informing some of the most important current and future decisions about management of species, communities, and ecological processes in the United States. The questions were generated by an open, inclusive process that included personal interviews with decisionmakers, broad solicitation of research needs from scientists and policymakers, and an intensive workshop that included scientifically oriented individuals responsible for managing and developing policy related to natural resources. The process differed from previous efforts to set priorities for conservation research in its focus on the engagement of decisionmakers in addition to researchers. The research priorities emphasized the importance of addressing societal context and exploration of trade-offs among alternative policies and actions, as well as more traditional questions related to ecological processes and functions.
Fluvial processes in Ma'adim Vallis and the potential of Gusev crater as a high priority site
NASA Technical Reports Server (NTRS)
Cabrol, Nathalie; Landheim, Ragnild; Greeley, Ronald; Farmer, Jack
1994-01-01
According to exobiology site selection criteria for Mars, the search for potential extinct/extant water dependent life should focus on sites were water flowed and ponded. The Ma'adim Vallis/Gusev crater system is of high priority for exobiology research, because it appears to have involved long term flooding, different periods and rates of sedimentation, and probable episodic ponding. The topics covered include the following: evidence of nonuniform fluvial processes and early overflooding of the plateau and ponding.
Innovative Learning Environments and New Materialism: A Conjunctural Analysis of Pedagogic Spaces
ERIC Educational Resources Information Center
Charteris, Jennifer; Smardon, Dianne; Nelson, Emily
2017-01-01
An Organisation for Economic Cooperation and Development research priority, innovative learning environments (ILEs) have been translated into policy and practice in 25 countries around the world. In Aotearoa/New Zealand, learning spaces are being reconceptualised in relation to this policy work by school leaders who are confronted by an impetus to…
ERIC Educational Resources Information Center
Taylor, Nicole; Wright, Jan; O'Flynn, Gabrielle
2016-01-01
A National Curriculum in Health and Physical Education (HPE) has recently been developed in Australia. This new curriculum reflects, among other educational priorities, both environmental sensitivities and a commitment to the enhancement of young people's health and wellbeing. HPE is one of the key sites in the curriculum where a focused…
Bibles, Other Scriptures, Liturgies, and Hymnals in Special Media.
ERIC Educational Resources Information Center
Library of Congress, Washington, DC. National Library Service for the Blind and Physically Handicapped.
This document lists the sacred texts of many world religions, in a variety of languages, translations, and versions, that are available in special media. The information provided for the materials includes source, medium, availability, and title. Priority was given to citing complete works; portions are listed only if they are unique in…
A site visit to the CEG confirmed that water and sanitation are priorities of the school board and parents of the children at the school. Both the need and desire for clean water and improved sanitation was apparent. The skills and materials needed to build...
Proceedings of the National Conference on Professional Priorities. [Curriculum and Materials.
ERIC Educational Resources Information Center
American Council on the Teaching of Foreign Languages, Hastings-on-Hudson, NY.
The following papers on foreign language curriculum development for the 1980s are included: (1) "Foreign Language and the Humanistic Tradition: The Relationship to the Coming Decade," by Claire Gaudiani; (2) "Practical Implications of New Trends and Directions," by Wilga Rivers; (3) "Directions in Foreign Language Curriculum Development," by H. H.…
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-13
... DEPARTMENT OF EDUCATION Office of Postsecondary Education; Overview Information; Pilot Program for... education (IHEs) for pilot programs that expand the services of bookstores to provide the option for... CFR 75.105(b)(2)(iv), this priority is from section 803 of the Higher Education Opportunity Act (HEOA...
An Intricate Fabric: Understanding the Rationality of Practice
ERIC Educational Resources Information Center
Dunne, Joseph
2005-01-01
This article provides an account of a "neo-Aristotelian" conception of practice. It introduces this account through an analysis of internal and external goods of practices. It then delineates a crucial distinction between practical and technical rationality and grounds this distinction in an analysis of the priority of "material" over "method" in…
Global Biology Research Program: Program plan
NASA Technical Reports Server (NTRS)
1983-01-01
Biological processes which play a dominant role in these cycles which transform and transfer much of this material throughout the biosphere are examined. A greater understanding of planetary biological processes as revealed by the interaction of the biota and the environment. The rationale, scope, research strategy, and research priorities of the global biology is presented.
A Selective Bibliography of the Mohawk People.
ERIC Educational Resources Information Center
Garrow, Larry; And Others
Designed to cover all media on all areas of Mohawk life, the bibliography also included general materials on the Iroquois where nothing on the Mohawks had been produced. To be relevant to Mohawks on the St. Regis Reserve, the bibliography used an informational survey of community priorities (1972, National Indian Education Association Library…
Federal Register 2010, 2011, 2012, 2013, 2014
2012-08-20
..., the USACE conducted additional subsurface soil sampling at four VPs in May and June 2003. Following... excavated. Post excavation sampling indicated all cleanup levels for these soils had been met. After five... license for radioactive materials was terminated by the NRC following Site decommissioning and the Site...
A Multi-Stage Reverse Logistics Network Problem by Using Hybrid Priority-Based Genetic Algorithm
NASA Astrophysics Data System (ADS)
Lee, Jeong-Eun; Gen, Mitsuo; Rhee, Kyong-Gu
Today remanufacturing problem is one of the most important problems regarding to the environmental aspects of the recovery of used products and materials. Therefore, the reverse logistics is gaining become power and great potential for winning consumers in a more competitive context in the future. This paper considers the multi-stage reverse Logistics Network Problem (m-rLNP) while minimizing the total cost, which involves reverse logistics shipping cost and fixed cost of opening the disassembly centers and processing centers. In this study, we first formulate the m-rLNP model as a three-stage logistics network model. Following for solving this problem, we propose a Genetic Algorithm pri (GA) with priority-based encoding method consisting of two stages, and introduce a new crossover operator called Weight Mapping Crossover (WMX). Additionally also a heuristic approach is applied in the 3rd stage to ship of materials from processing center to manufacturer. Finally numerical experiments with various scales of the m-rLNP models demonstrate the effectiveness and efficiency of our approach by comparing with the recent researches.
NASA Astrophysics Data System (ADS)
Varun, Sajja; Reddy, Kalakada Bhargav Bal; Vardhan Reddy, R. R. Vishnu
2016-09-01
In this research work, development of a multi response optimization technique has been undertaken, using traditional desirability analysis and non-traditional particle swarm optimization techniques (for different customer's priorities) in wire electrical discharge machining (WEDM). Monel 400 has been selected as work material for experimentation. The effect of key process parameters such as pulse on time (TON), pulse off time (TOFF), peak current (IP), wire feed (WF) were on material removal rate (MRR) and surface roughness(SR) in WEDM operation were investigated. Further, the responses such as MRR and SR were modelled empirically through regression analysis. The developed models can be used by the machinists to predict the MRR and SR over a wide range of input parameters. The optimization of multiple responses has been done for satisfying the priorities of multiple users by using Taguchi-desirability function method and particle swarm optimization technique. The analysis of variance (ANOVA) is also applied to investigate the effect of influential parameters. Finally, the confirmation experiments were conducted for the optimal set of machining parameters, and the betterment has been proved.
Mousseau, Alicia C; Scott, Walter D; Estes, David
2014-03-01
Very little is known about processes contributing to depressive experiences in American Indian youth. We explored the relationship between value priorities and depressive symptoms among 183 (65% female) American Indian youth in grades 9-12. In addition, two potential moderators of this relationship were examined: value outcome expectations (i.e., whether one expects that values will be realized or not) and perceived community values. We found that American Indian youth who endorsed higher levels of tradition/benevolence values reported fewer depressive symptoms. However, the relationship between endorsing power/materialism values and depressive symptoms depended on the extent to which youth perceived their communities as valuing power/materialism. Finally, value outcome expectancies appeared to relate more strongly to depressive symptoms than did value priorities. Overall, these findings support tribal community efforts to impart tradition/benevolence values to American Indian youth but also emphasize the importance of attending to value outcome expectations and the perceived values of the community in understanding American Indian youth's depressive experiences.
A lock-free priority queue design based on multi-dimensional linked lists
Dechev, Damian; Zhang, Deli
2015-04-03
The throughput of concurrent priority queues is pivotal to multiprocessor applications such as discrete event simulation, best-first search and task scheduling. Existing lock-free priority queues are mostly based on skiplists, which probabilistically create shortcuts in an ordered list for fast insertion of elements. The use of skiplists eliminates the need of global rebalancing in balanced search trees and ensures logarithmic sequential search time on average, but the worst-case performance is linear with respect to the input size. In this paper, we propose a quiescently consistent lock-free priority queue based on a multi-dimensional list that guarantees worst-case search time of O(logN)more » for key universe of size N. The novel multi-dimensional list (MDList) is composed of nodes that contain multiple links to child nodes arranged by their dimensionality. The insertion operation works by first injectively mapping the scalar key to a high-dimensional vector, then uniquely locating the target position by using the vector as coordinates. Nodes in MDList are ordered by their coordinate prefixes and the ordering property of the data structure is readily maintained during insertion without rebalancing nor randomization. Furthermore, in our experimental evaluation using a micro-benchmark, our priority queue achieves an average of 50% speedup over the state of the art approaches under high concurrency.« less
A lock-free priority queue design based on multi-dimensional linked lists
DOE Office of Scientific and Technical Information (OSTI.GOV)
Dechev, Damian; Zhang, Deli
The throughput of concurrent priority queues is pivotal to multiprocessor applications such as discrete event simulation, best-first search and task scheduling. Existing lock-free priority queues are mostly based on skiplists, which probabilistically create shortcuts in an ordered list for fast insertion of elements. The use of skiplists eliminates the need of global rebalancing in balanced search trees and ensures logarithmic sequential search time on average, but the worst-case performance is linear with respect to the input size. In this paper, we propose a quiescently consistent lock-free priority queue based on a multi-dimensional list that guarantees worst-case search time of O(logN)more » for key universe of size N. The novel multi-dimensional list (MDList) is composed of nodes that contain multiple links to child nodes arranged by their dimensionality. The insertion operation works by first injectively mapping the scalar key to a high-dimensional vector, then uniquely locating the target position by using the vector as coordinates. Nodes in MDList are ordered by their coordinate prefixes and the ordering property of the data structure is readily maintained during insertion without rebalancing nor randomization. Furthermore, in our experimental evaluation using a micro-benchmark, our priority queue achieves an average of 50% speedup over the state of the art approaches under high concurrency.« less
Patient and public engagement in priority setting: A systematic rapid review of the literature.
Manafò, Elizabeth; Petermann, Lisa; Vandall-Walker, Virginia; Mason-Lai, Ping
2018-01-01
Current research suggests that while patients are becoming more engaged across the health delivery spectrum, this involvement occurs most often at the pre-preparation stage to identify 'high-level' priorities in health ecosystem priority setting, and at the preparation phase for health research. The purpose of this systematic rapid review of the literature is to describe the evidence that does exist in relation to patient and public engagement priority setting in both health ecosystem and health research. HealthStar (via OVID); CINAHL; Proquest Databases; and Scholar's Portal. i) published in English; ii) published within the timeframe of 2007-Current (10 years) unless the report/article was formative in synthesizing key considerations of patient engagement in health ecosystem and health research priority setting; iii) conducted in Canada, the US, Europe, UK, Australia/New Zealand, or Scandinavian countries. i) Is the research valid, sound, and applicable?; ii) what outcomes can we potentially expect if we implement the findings from this research?; iii) will the target population (i.e., health researchers and practitioners) be able to use this research?. A summary of findings from each of the respective processes was synthesized to highlight key information that would support decision-making for researchers when determining the best priority setting process to apply for their specific patient-oriented research. Seventy articles from the UK, US, Canada, Netherlands and Australia were selected for review. Results were organized into two tiers of public and patient engagement in prioritization: Tier 1-Deliberative and Tier 2-Consultative. Highly structured patient and public engagement planning activities include the James Lind Alliance Priority Setting Partnerships (UK), Dialogue Method (Netherlands), Global Evidence Mapping (Australia), and the Deep Inclusion Method/CHoosing All Together (US). The critical study limitations include challenges in comprehensively identifying the patient engagement literature for review, bias in article selection due to the identified scope, missed information due to a more limited use of exhaustive search strategies (e.g., in-depth hand searching), and the heterogeneity of reported study findings. The four public and patient engagement priority setting processes identified were successful in setting priorities that are inclusive and objectively based, specific to the priorities of stakeholders engaged in the process. The processes were robust, strategic and aimed to promote equity in patient voices. Key limitations identified a lack of evaluation data on the success and extent in which patients were engaged. Issues pertaining to feasibility of stakeholder engagement, coordination, communication and limited resources were also considered.
Twedt, D.J.; Uihlein, W.B.; Fredrickson, L.H.; King, S.L.; Kaminski, R.M.
2005-01-01
Thousands of ha of cleared wetlands are being reforested annually in the Mississippi Alluvial Valley (MAV). Despite the expansive and long-term impacts of reforestation on the biological communities of the MAV, there is generally a lack of landscape level planning in its implementation. To address this deficiency we used raster-based digital data to assess the value of forest restoration to migratory landbirds for each ha within the MAV. Raster themes were developed that reflected distance from 3 existing forest cover parameters: (1) extant forest, (2) contiguous forest patches between 1,012 and 40,000 ha, and (3) forest cores with contiguous area 1 km from an agricultural, urban, or pastoral edge. Two additional raster themes were developed that combined information on the proportion of forest cover and average size of forest patches, respectively, within landscapes of 50,000, 100,000, 150,000, and 200,000 ha. Data from these 5 themes were amalgamated into a single raster using a weighting system that gave increased emphasis to existing forest cores, larger forest patches, and moderately forested landscapes while deemphasizing reforestation near small or isolated forest fragments and within largely agricultural landscapes. This amalgamated raster was then modified by the geographic location of historical forest cover and the current extent of public land ownership to assign a reforestation priority score to each ha in the MAV. However, because reforestation is not required on areas with extant forest cover and because restoration is unlikely on areas of open water and urban communities, these lands were not assigned a reforestation priority score. These spatially explicit reforestation priority scores were used to simulate reforestation of 368,000 ha (5%) of the highest priority lands in the MAV. Targeting restoration to these high priority areas resulted in a 54% increase in forest core - an area of forest core that exceeded the area of simulated reforestation. Bird Conservation Regions, developed within the framework of the Partners in Flight: Mississippi Alluvial Valley Bird Conservation Plan, encompassed a large proportion (circa 70%) of the area with highest priority for reforestation. Similarly, lands with high reforestation priority often were enrolled in the Wetland Reserve Program.
Dong, Kimberly R; Must, Aviva; Tang, Alice M; Beckwith, Curt G; Stopka, Thomas J
2018-02-27
Individuals on probation experience economic disadvantage because their criminal records often prohibit gainful employment, which compromises their ability to access the basic components of wellbeing. Unemployment and underemployment have been studied as distinct phenomenon but no research has examined multiple determinants of health in aggregate or explored how these individuals prioritize each of these factors. This study identified and ranked competing priorities in adults on probation and qualitatively explored how these priorities impact health. We conducted in-depth interviews in 2016 with 22 adults on probation in Rhode Island to determine priority rankings of basic needs. We used Maslow's hierarchy of needs theory and the literature to guide the priorities we pre-selected for probationers to rank. Within a thematic analysis framework, we used a modified ranking approach to identify the priorities chosen by participants and explored themes related to the top four ranked priorities. We found that probationers ranked substance use recovery, employment, housing, and food intake as the top four priorities. Probationers in recovery reported sobriety as the most important issue, a necessary basis to be able to address other aspects of life. Participants also articulated the interrelatedness of difficulties in securing employment, food, and housing; these represent stressors for themselves and their families, which negatively impact health. Participants ranked healthcare last and many reported underinsurance as an issue to accessing care. Adults on probation are often faced with limited economic potential and support systems that consistently place them in high-risk environments with increased risk for recidivism. These findings emphasize the need for policies that address the barriers to securing gainful employment and safe housing. Interventions that reflect probationer priorities are necessary to begin to mitigate the health disparities in this population.
A Descriptive Analysis of End-of-Life Conversations With Long-Term Glioblastoma Survivors.
Miranda, Stephen P; Bernacki, Rachelle E; Paladino, Joanna M; Norden, Andrew D; Kavanagh, Jane E; Palmor, Marissa C; Block, Susan D
2018-05-01
Early, high-quality serious illness (SI) conversations are critical for patients with glioblastoma (GBM) but are often mistimed or mishandled. To describe the prevalence, timing, and quality of documented SI conversations and evaluate their focus on patient goals/priorities. Thirty-three patients with GBM enrolled in the control group of a randomized controlled trial of a communication intervention and were followed for 2 years or until death. At baseline, all patients answered a validated question about preferences for life-extending versus comfort-focused care and completed a Life Priorities Survey about their goals/priorities. In this secondary analysis, retrospective chart review was performed for 18 patients with GBM who died. Documented SI conversations were systematically identified and evaluated using a codebook reflecting 4 domains: prognosis, goals/priorities, end-of-life planning, and life-sustaining treatments. Patient goals/priorities were compared to documentation. At baseline, 16 of 24 patients preferred life-extending care. In the Life Priorities Survey, goals/priorities most frequently ranked among the top 3 were "Live as long as possible," "Be mentally aware," "Provide support for family," "Be independent," and "Be at peace." Fifteen of 18 patients had at least 1 documented SI conversation (range: 1-4). Median timing of the first documented SI conversation was 84 days before death (range: 29-231; interquartile range: 46-119). Fifteen patients had documentation about end-of-life planning, with "hospice" and "palliative care" most frequently documented. Five of 18 patients had documentation about their goals. Patients with GBM had multiple goals/priorities with potential treatment implications, but documentation showed SI conversations occurred relatively late and infrequently reflected patient goals/priorities.
Khayatzadeh-Mahani, Akram; Fotaki, Marianna; Harvey, Gillian
2013-08-01
The question of how priority setting processes work remains topical, contentious and political in every health system across the globe. It is particularly acute in the context of developing countries because of the mismatch between needs and resources, which is often compounded by an underdeveloped capacity for decision making and weak institutional infrastructures. Yet there is limited research into how the process of setting and implementing health priorities works in developing countries. This study aims to address this gap by examining how a national priority setting programme works in the centralized health system of Iran and what factors influence its implementation at the meso and micro levels. We used a qualitative case study approach, incorporating mixed methods: in-depth interviews at three levels and a textual analysis of policy documents. The data analysis showed that the process of priority setting is non-systematic, there is little transparency as to how specific priorities are decided, and the decisions made are separated from their implementation. This is due to the highly centralized system, whereby health priorities are set at the macro level without involving meso or micro local levels or any representative of the public. Furthermore, the two main benefit packages are decided by different bodies (Ministry of Health and Medical Education and Ministry of Welfare and Social Security) and there is no co-ordination between them. The process is also heavily influenced by political pressure exerted by various groups, mostly medical professionals who attempt to control priority setting in accordance with their interests. Finally, there are many weaknesses in the implementation of priorities, resulting in a growing gap between rural and urban areas in terms of access to health services.
Benchmarking and gap analysis of faculty mentorship priorities and how well they are met.
Bruner, Deborah Watkins; Dunbar, Sandra; Higgins, Melinda; Martyn, Kristy
2016-01-01
There is little consensus among faculty mentoring programs as to best practices. While there are recommendations in the literature to base faculty development programs on gap analyses of faculty ratings of actual and preferred performance in teaching, scholarship and service, no gap analysis was found in the literature. Thus, the purpose of this study was to develop a survey tool to benchmark school of nursing (SON) faculty mentorship priorities and conduct a gap analysis of how well they were being addressed. Senior faculty who lead mentorship as part of their roles in the SON (associate and assistant deans and director of mentorship) developed a survey through (a) asking faculty members for priorities at in-person mentorship seminars, (b) a review of current nursing literature, and (c) input from the SON mentorship advisory board. The final survey included 37 items focused on general job duties, structure of the mentoring program, time management, as well as skills needed for research, teaching, practice, writing and team science. Responses (rated from 0-not important to 5-very high priority) were requested in 4 areas: the first area focused on how high a priority the respondent rated a given item and areas 2 to 4 focused on how well the need was met by one of three resources: their SON primary assigned mentor, other SON resources, or other university resources. There were 63 eligible SON faculty to whom the survey was e-mailed with a 60% (n = 38) response rate. Most of the respondents were clinical track (42.1%) followed by tenure track (39.5%) and research track (15.8%). Half were assistant professors. The percentage of respondents giving a rating of 4 to 5 were calculated and then ranked. Almost all the faculty responding, regardless of track or rank, desired formal mentorship. Among all faculty, the top five priorities were guidance on producing timely publications (70.4%), mentorship on work-life balance (68%), mentorship on putting together a promotion package (61.5%), guidance on test writing (60%), and utilizing technology in the classroom (60%). Priorities varied by faculty track. In terms of the gap between mentorship priorities and how well they were being met, the highest gaps overall were for test writing, using technology in the classroom, curriculum development, lecturing, and developing and managing a research team. As with priorities, the gaps between priorities and how well they were being met varied by track. The priorities and gap analysis were used to guide career development program activities and to develop a plan for future mentor-mentee training and activities. The survey tool demonstrated face validity, variability, and preliminary utility as one method for assessing and guiding improvements in faculty mentorship. Published by Elsevier Inc.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-07-12
... schools. (3) A multi-year financial and operating model for the organization, a demonstrated commitment of... school model and to expand the number of high-quality charter schools available to students across the... percent threshold in this priority is consistent with the average percentage of students in large urban...
Basic Principles--Outdoor Living Skills Series. Instructor Manual.
ERIC Educational Resources Information Center
Deaton, Don
The priorities for sustaining life--air, shelter, water, and food--are the subjects of this module designed to give junior and senior high school students the foundation for safe, rewarding experiences in the outdoors. Five 50-minute lesson plans cover the basic need in order of priority: air (3 minutes to survive without it), shelter (3 hours, in…
The Next Linear Collider Program-News
The Next Linear Collider at SLAC Navbar The Next Linear Collider In The Press The Secretary of Linear Collider is a high-priority goal of this plan. http://www.sc.doe.gov/Sub/Facilities_for_future/20 -term projects in conceputal stages (the Linear Collider is the highest priority project in this
National Rules for Drug–Drug Interactions: Are They Appropriate for Tertiary Hospitals?
2016-01-01
The application of appropriate rules for drug–drug interactions (DDIs) could substantially reduce the number of adverse drug events. However, current implementations of such rules in tertiary hospitals are problematic as physicians are receiving too many alerts, causing high override rates and alert fatigue. We investigated the potential impact of Korean national DDI rules in a drug utilization review program in terms of their severity coverage and the clinical efficiency of how physicians respond to them. Using lists of high-priority DDIs developed with the support of the U.S. government, we evaluated 706 contraindicated DDI pairs released in May 2015. We evaluated clinical log data from one tertiary hospital and prescription data from two other tertiary hospitals. The measured parameters were national DDI rule coverage for high-priority DDIs, alert override rate, and number of prescription pairs. The coverage rates of national DDI rules were 80% and 3.0% at the class and drug levels, respectively. The analysis of the system log data showed an overall override rate of 79.6%. Only 0.3% of all of the alerts (n = 66) were high-priority DDI rules. These showed a lower override rate of 51.5%, which was much lower than for the overall DDI rules. We also found 342 and 80 unmatched high-priority DDI pairs which were absent in national rules in inpatient orders from the other two hospitals. The national DDI rules are not complete in terms of their coverage of severe DDIs. They also lack clinical efficiency in tertiary settings, suggesting improved systematic approaches are needed. PMID:27822925
Chumak, A A; Medvedovska, N V; Ovsannikova, L M
2013-01-01
OBJECTIVE. To analyze the results of scientific research on the problems of radiation medicine and radiobiology for the further outlining of the priority fields of research in this area. MATERIALS. Perspective plans and annual summary of research (R & D) NAMS of Ukraine, interim and final reports on implementation of research, reports on the activities of institutions, thematic scientific publications. METHODS. Semantic and content analysis, bibliometry, historical and logical analysis. RESULTS. The definition of major oncological risks of radiation effects, study of radiation risks of morbidity and mortality from cardiovascular and cerebrovascular diseases, cognitive effects and cataract in liquidators of the Chornobyl nuclear power plant accident, study of transgenic effects of the brain irradiation, other organs and systems in various stages of ontogenesis in exposed in utero, in offspring of exposed parents; study of the effects of occupational exposure were recognized as perspective and requiring further research in radiation medicine. CONCLUSION. Issues of NNCRM scientific activity are consistent with priority areas of research in Ukraine defined by the Law "On priority directions of science and technology", namely, aimed at substantiating of the development and preservation of human potential, aimed at the creation of modern technologies on prevention and treatment of most common diseases. Chumak A. A., Medvedovska N. V., Ovsjannikova L. M. 2013.
Phillips-Howard, Penelope A.; Caruso, Bethany; Torondel, Belen; Zulaika, Garazi; Sahin, Murat; Sommer, Marni
2016-01-01
Background A lack of adequate guidance on menstrual management; water, disposal, and private changing facilities; and sanitary hygiene materials in low- and middle-income countries leaves schoolgirls with limited options for healthy personal hygiene during monthly menses. While a plethora of observational studies have described how menstrual hygiene management (MHM) barriers in school impact girls’ dignity, well-being, and engagement in school activities, studies have yet to confirm if inadequate information and facilities for MHM significantly affects quantifiable school and health outcomes influencing girls’ life chances. Evidence on these hard outcomes will take time to accrue; however, a current lack of standardized methods, tools, and research funding is hampering progress and must be addressed. Objectives Compile research priorities for MHM and types of research methods that can be used. Results In this article, we highlight the current knowledge gaps in school-aged girls’ MHM research, and identify opportunities for addressing the dearth of hard evidence limiting the ability of governments, donors, and other agencies to appropriately target resources. We outline a series of research priorities and methodologies that were drawn from an expert panel to address global priorities for MHM in schools for the next 10 years. Conclusions A strong evidence base for different settings, standardized definitions regarding MHM outcomes, improved study designs and methodologies, and the creation of an MHM research consortia to focus attention on this neglected global issue. PMID:27938648
DOE Office of Scientific and Technical Information (OSTI.GOV)
Bekelman, Justin E., E-mail: bekelman@uphs.upenn.edu; Department of Medical Ethics and Health Policy, Perelman School of Medicine, University of Pennsylvania, Philadelphia, Pennsylvania; Leonard Davis Institute of Health Economics, University of Pennsylvania, Philadelphia, Pennsylvania
Purpose: To present the principles and rationale of the Proton Priority System (PROPS), a priority points framework that assigns higher scores to patients thought to more likely benefit from proton therapy, and the distribution of PROPS scores by patient characteristics Methods and Materials: We performed multivariable logistic regression to evaluate the association between PROPS scores and receipt of proton therapy, adjusted for insurance status, gender, race, geography, and the domains that inform the PROPS score. Results: Among 1529 adult patients considered for proton therapy prioritization during our Center's ramp-up phase of treatment availability, PROPS scores varied by age, diagnosis, site,more » and other PROPS domains. In adjusted analyses, receipt of proton therapy was lower for patients with non-Medicare relative to Medicare health insurance (commercial vs Medicare: adjusted odds ratio [OR] 0.47, 95% confidence interval [CI] 0.34-0.64; managed care vs Medicare: OR 0.40, 95% CI 0.28-0.56; Medicaid vs Medicare: OR 0.24, 95% CI 0.13-0.44). Proton Priority System score and age were not significantly associated with receipt of proton therapy. Conclusions: The Proton Priority System is a rationally designed and transparent system for allocation of proton therapy slots based on the best available evidence and expert opinion. Because the actual allocation of treatment slots depends mostly on insurance status, payers may consider incorporating PROPS, or its underlying principles, into proton therapy coverage policies.« less
Phillips-Howard, Penelope A; Caruso, Bethany; Torondel, Belen; Zulaika, Garazi; Sahin, Murat; Sommer, Marni
2016-01-01
A lack of adequate guidance on menstrual management; water, disposal, and private changing facilities; and sanitary hygiene materials in low- and middle-income countries leaves schoolgirls with limited options for healthy personal hygiene during monthly menses. While a plethora of observational studies have described how menstrual hygiene management (MHM) barriers in school impact girls' dignity, well-being, and engagement in school activities, studies have yet to confirm if inadequate information and facilities for MHM significantly affects quantifiable school and health outcomes influencing girls' life chances. Evidence on these hard outcomes will take time to accrue; however, a current lack of standardized methods, tools, and research funding is hampering progress and must be addressed. Compile research priorities for MHM and types of research methods that can be used. In this article, we highlight the current knowledge gaps in school-aged girls' MHM research, and identify opportunities for addressing the dearth of hard evidence limiting the ability of governments, donors, and other agencies to appropriately target resources. We outline a series of research priorities and methodologies that were drawn from an expert panel to address global priorities for MHM in schools for the next 10 years. A strong evidence base for different settings, standardized definitions regarding MHM outcomes, improved study designs and methodologies, and the creation of an MHM research consortia to focus attention on this neglected global issue.
Avian Conservation Areas as a Proxy for Contaminated Soil Remediation
Lin, Wei-Chih; Lin, Yu-Pin; Anthony, Johnathen; Ding, Tsun-Su
2015-01-01
Remediation prioritization frequently falls short of systematically evaluating the underlying ecological value of different sites. This study presents a novel approach to delineating sites that are both contaminated by any of eight heavy metals and have high habitat value to high-priority species. The conservation priority of each planning site herein was based on the projected distributions of eight protected bird species, simulated using 900 outputs of species distribution models (SDMs) and the subsequent application of a systematic conservation tool. The distributions of heavy metal concentrations were generated using a geostatistical joint-simulation approach. The uncertainties in the heavy metal distributions were quantified in terms of variability among 1000 realization sets. Finally, a novel remediation decision-making approach was presented for delineating contaminated sites in need of remediation based on the spatial uncertainties of multiple realizations and the priorities of conservation areas. The results thus obtained demonstrate that up to 42% of areas of high conservation priority are also contaminated by one or more of the heavy metal contaminants of interest. Moreover, as the proportion of the land for proposed remediated increased, the projected area of the pollution-free habitat also increased. Overall uncertainty, in terms of the false positive contamination rate, also increased. These results indicate that the proposed decision-making approach successfully accounted for the intrinsic trade-offs among a high number of pollution-free habitats, low false positive rates and robustness of expected decision outcomes. PMID:26193297
Laboratory test methods for evaluating the fire response of aerospace materials
NASA Technical Reports Server (NTRS)
Hilado, C. J.
1979-01-01
The test methods which were developed or evaluated were intended to serve as means of comparing materials on the basis of specific responses under specific sets of test conditions, using apparatus, facilities, and personnel that would be within the capabilities of perhaps the majority of laboratories. Priority was given to test methods which showed promise of addressing the pre-ignition state of a potential fire. These test methods were intended to indicate which materials may present more hazard than others under specific test conditions. These test methods are discussed and arranged according to the stage of a fire to which they are most relevant. Some observations of material performance which resulted from this work are also discussed.
Emotion strengthens high priority memory traces but weakens low priority memory traces
Sakaki, Michiko; Fryer, Kellie; Mather, Mara
2014-01-01
When encountering emotional events, memory for those events is typically enhanced. But it has been unclear how emotionally arousing events influence memory for preceding information. Does emotional arousal induce retrograde amnesia or retrograde enhancement? The current study revealed that this depends on the top-down goal relevance of the preceding information. Across three studies, we found that emotional arousal induced by one image facilitated memory for the preceding neutral item when people prioritized that neutral item. In contrast, an emotional image impaired memory for the preceding neutral item when people did not prioritize that neutral item. Emotional arousal elicited by negative and positive pictures both showed this pattern of enhancing or impairing memory for the preceding stimulus depending on its priority. These results indicate that emotional arousal amplifies the effects of top-down priority in memory formation. PMID:24311478
Strengthening expertise for health technology assessment and priority-setting in Africa
Doherty, Jane E; Wilkinson, Thomas; Edoka, Ijeoma; Hofman, Karen
2017-01-01
ABSTRACT Background: Achieving sustainable universal health coverage depends partly on fair priority-setting processes that ensure countries spend scarce resources wisely. While general health economics capacity-strengthening initiatives exist in Africa, less attention has been paid to developing the capacity of individuals, institutions and networks to apply economic evaluation in support of health technology assessment and effective priority-setting. Objective: On the basis of international lessons, to identify how research organisations and partnerships could contribute to capacity strengthening for health technology assessment and priority-setting in Africa. Methods: A rapid scan was conducted of international formal and grey literature and lessons extracted from the deliberations of two international and regional workshops relating to capacity-building for health technology assessment. ‘Capacity’ was defined in broad terms, including a conducive political environment, strong public institutional capacity to drive priority-setting, effective networking between experts, strong research organisations and skilled researchers. Results: Effective priority-setting requires more than high quality economic research. Researchers have to engage with an array of stakeholders, network closely other research organisations, build partnerships with different levels of government and train the future generation of researchers and policy-makers. In low- and middle-income countries where there are seldom government units or agencies dedicated to health technology assessment, they also have to support the development of an effective priority-setting process that is sensitive to societal and government needs and priorities. Conclusions: Research organisations have an important role to play in contributing to the development of health technology assessment and priority-setting capacity. In Africa, where there are resource and capacity challenges, effective partnerships between local and international researchers, and with key government stakeholders, can leverage existing skills and knowledge to generate a critical mass of individuals and institutions. These would help to meet the priority-setting needs of African countries and contribute to sustainable universal health coverage. PMID:29035166
Casalegno, Stefano; Bennie, Jonathan J; Inger, Richard; Gaston, Kevin J
2014-01-01
Although the importance of addressing ecosystem service benefits in regional land use planning and decision-making is evident, substantial practical challenges remain. In particular, methods to identify priority areas for the provision of key ecosystem services and other environmental services (benefits from the environment not directly linked to the function of ecosystems) need to be developed. Priority areas are locations which provide disproportionally high benefits from one or more service. Here we map a set of ecosystem and environmental services and delineate priority areas according to different scenarios. Each scenario is produced by a set of weightings allocated to different services and corresponds to different landscape management strategies which decision makers could undertake. Using the county of Cornwall, U.K., as a case study, we processed gridded maps of key ecosystem services and environmental services, including renewable energy production and urban development. We explored their spatial distribution patterns and their spatial covariance and spatial stationarity within the region. Finally we applied a complementarity-based priority ranking algorithm (zonation) using different weighting schemes. Our conclusions are that (i) there are two main patterns of service distribution in this region, clustered services (including agriculture, carbon stocks, urban development and plant production) and dispersed services (including cultural services, energy production and floods mitigation); (ii) more than half of the services are spatially correlated and there is high non-stationarity in the spatial covariance between services; and (iii) it is important to consider both ecosystem services and other environmental services in identifying priority areas. Different weighting schemes provoke drastic changes in the delineation of priority areas and therefore decision making processes need to carefully consider the relative values attributed to different services.
Casalegno, Stefano; Bennie, Jonathan J.; Inger, Richard; Gaston, Kevin J.
2014-01-01
Although the importance of addressing ecosystem service benefits in regional land use planning and decision-making is evident, substantial practical challenges remain. In particular, methods to identify priority areas for the provision of key ecosystem services and other environmental services (benefits from the environment not directly linked to the function of ecosystems) need to be developed. Priority areas are locations which provide disproportionally high benefits from one or more service. Here we map a set of ecosystem and environmental services and delineate priority areas according to different scenarios. Each scenario is produced by a set of weightings allocated to different services and corresponds to different landscape management strategies which decision makers could undertake. Using the county of Cornwall, U.K., as a case study, we processed gridded maps of key ecosystem services and environmental services, including renewable energy production and urban development. We explored their spatial distribution patterns and their spatial covariance and spatial stationarity within the region. Finally we applied a complementarity-based priority ranking algorithm (zonation) using different weighting schemes. Our conclusions are that (i) there are two main patterns of service distribution in this region, clustered services (including agriculture, carbon stocks, urban development and plant production) and dispersed services (including cultural services, energy production and floods mitigation); (ii) more than half of the services are spatially correlated and there is high non-stationarity in the spatial covariance between services; and (iii) it is important to consider both ecosystem services and other environmental services in identifying priority areas. Different weighting schemes provoke drastic changes in the delineation of priority areas and therefore decision making processes need to carefully consider the relative values attributed to different services. PMID:25250775
Summary of Martian Dust Filtering Challenges and Current Filter Development
NASA Technical Reports Server (NTRS)
O'Hara, William J., IV
2017-01-01
Traditional air particulate filtering in manned spaceflight (Apollo, Shuttle, ISS, etc.) has used cleanable or replaceable catch filters such as screens and High-Efficiency Particulate Arrestance (HEPA) filters. However, the human mission to Mars architecture will require a new approach. It is Martian dust that is the particulate of concern but the need also applies to particulates generated by crew. The Mars Exploration Program Analysis Group (MEPAG) high-lighted this concern in its Mars Science, Goals, Objectives, Investigations and Priorities document [7], by saying specifically that one high priority investigation will be to "Test ISRU atmospheric processing systems to measure resilience with respect to dust and other environmental challenge performance parameters that are critical to the design of a full-scale system." By stating this as high priority the MEPAG is acknowledging that developing and adequately verifying this capability is critical to success of a human mission to Mars. This architecture will require filtering capabilities that are highly reliable, will not restrict the flow path with clogging, and require little to no maintenance. This paper will summarize why this is the case, the general requirements for developing the technology, and the status of the progress made in this area.
1988 Delphi survey of nursing research priorities for New York State.
Shortridge, L; Doswell, W; Evans, M E; Levin, R F; Millor, G K; Carter, E
1989-09-01
In order to inform decisions about nursing research and health care policy, the Council on Nursing Research of the New York State Nurses Association (NYSNA) conducted a Delphi survey to identify the priorities for nursing research in New York state. The Delphi technique is a method of eliciting judgements from experts for the purpose of short-term forecasting and planning. The survey was conducted by mail in three rounds during 1988. Round I required participants to identify three primary research priorities for the nursing profession. In Round II participants ranked the 37 most frequently identified categories from Round I. The highest 16 categories from Round II were ranked by participants in Round III to provide the final 10 nursing research priority categories for New York state. All members of the New York State Nurses Association holding a minimum of a master's degree in nursing were invited to participate. The response rates were: Round I, 34% (N = 872); Round II, 38% (N = 985); Round III 37% (N = 974). Of the 10 nursing research priority categories identified in the final round, 5 relate to nurses, 2 relate to nursing, and 3 relate to clients. None of the high-risk conditions or populations with whom nurses work appear in the top 10, and only 2 of these are ranked in the top 15 priority categories. These priority categories will be used by the NYSNA Council on Nursing Research to influence its future agenda and activities. They can be used by the nursing profession and others for planning, policy making, and establishing nursing research funding priorities.(ABSTRACT TRUNCATED AT 250 WORDS)
He, Feng; Zhao, Lin; Li, Ershuai
2017-01-01
Ethernet-AVB/TSN (Audio Video Bridging/Time-Sensitive Networking) and AFDX (Avionics Full DupleX switched Ethernet) are switched Ethernet technologies, which are both candidates for real-time communication in the context of transportation systems. AFDX implements a fixed priority scheduling strategy with two priority levels. Ethernet-AVB/TSN supports a similar fixed priority scheduling with an additional Credit-Based Shaper (CBS) mechanism. Besides, TSN can support time-triggered scheduling strategy. One direct effect of CBS mechanism is to increase the delay of its flows while decreasing the delay of other priority ones. The former effect can be seen as the shaping restriction and the latter effect can be seen as the shaping benefit from CBS. The goal of this paper is to investigate the impact of CBS on different priority flows, especially on the intermediate priority ones, as well as the effect of CBS bandwidth allocation. It is based on a performance comparison of AVB/TSN and AFDX by simulation in an automotive case study. Furthermore, the shaping benefit is modeled based on integral operation from network calculus perspective. Combing with the analysis of shaping restriction and shaping benefit, some configuration suggestions on the setting of CBS bandwidth are given. Results show that the effect of CBS depends on flow loads and CBS configurations. A larger load of high priority flows in AVB tends to a better performance for the intermediate priority flows when compared with AFDX. Shaping benefit can be explained and calculated according to the changing from the permitted maximum burst. PMID:28531158
Prioritizing conservation areas for coastal plant diversity under increasing urbanization.
Doxa, Aggeliki; Albert, Cécile Hélène; Leriche, Agathe; Saatkamp, Arne
2017-10-01
Coastal urban expansion will continue to drive further biodiversity losses, if conservation targets for coastal ecosystems are not defined and met. Prioritizing areas for future protected area networks is thus an urgent task in such urbanization-threatened ecosystems. Our aim is to quantify past and future losses of coastal vegetation priority areas due to urbanization and assess the effectiveness of the existing protected area network for conservation. We conduct a prioritization analysis, based on 82 coastal plants, including common and IUCN red list species, in a highly-urbanized but biotically diverse region, in South-Eastern France. We evaluate the role of protected areas, by taking into account both strict and multi-use areas. We assess the impact of past and future urbanization on high priority areas, by combining prioritization analyses and urbanization models. We show that half of the highly diverse areas have already been lost due to urbanization. Remaining top priority areas are also among the most exposed to future urban expansion. The effectiveness of the existing protected area (PA) network is only partial. While strict PAs coincide well with top priority areas, they only represent less than one third of priority areas. The effectiveness of multi-use PAs, such as the Natura 2000 network, also remains limited. Our approach highlights the impact of urbanization on plant conservation targets. By modelling urbanization, we manage to identify those areas where protection could be more efficient to limit further losses. We suggest to use our approach in the future to expand the PA network in order to achieve the 2020 Aichi biodiversity targets. Copyright © 2017 Elsevier Ltd. All rights reserved.
Wang, Zhaoguo; Du, Xishihui
2016-07-01
Natural World Heritage Sites (NWHSs) are invaluable treasure due to the uniqueness of each site. Proper monitoring and management can guarantee their protection from multiple threats. In this study, geographic information system (GIS)-based multi-criteria decision analysis (GIS-MCDA) was used to assess criteria layers acquired from the data available in the literature. A conceptual model for determining the priority area for monitoring in Bogda, China, was created based on outstanding universal values (OUV) and expert knowledge. Weights were assigned to each layer using the analytic hierarchy process (AHP) based on group decisions, encompassing three experts: one being a heritage site expert, another a forest ranger, and the other a heritage site manager. Subsequently, evaluation layers and constraint layers were used to generate a priority map and to determine the feasibility of monitoring in Bogda. Finally, a monitoring suitability map of Bogda was obtained by referencing priority and feasibility maps.The high-priority monitoring area is located in the montane forest belt, which exhibits high biodiversity and is the main tourist area of Bogda. The northern buffer zone of Bogda comprises the concentrated feasible monitoring areas, and the area closest to roads and monitoring facilities is highly feasible for NWHS monitoring. The suitability of an area in terms of monitoring is largely determined by the monitoring priority in that particular area. The majority of planned monitoring facilities are well distributed in both suitable and less suitable areas. Analysis results indicate that the protection of Bogda will be more scientifically based due to its effective and all-around planned monitoring system proposed by the declaration text of Xinjiang Tianshan, which is the essential file submitted to World Heritage Centre to inscribe as a NWHS.
Toledo-Aceves, Tarin; Meave, Jorge A; González-Espinosa, Mario; Ramírez-Marcial, Neptalí
2011-03-01
Tropical montane cloud forests (TMCF) are among the most threatened ecosystems globally in spite of their high strategic value for sustainable development due to the key role played by these forests in hydrological cycle maintenance and as reservoirs of endemic biodiversity. Resources for effective conservation and management programs are rarely sufficient, and criteria must be applied to prioritize TMCF for conservation action. This paper reports a priority analysis of the 13 main regions of TMCF distribution in Mexico, based on four criteria: (1) forest quality, (2) threats to forest permanence, (3) threats to forest integrity, and (4) opportunities for conservation. Due to the diverse socio-environmental conditions of the local communities living in Mexican TMCF regions, their associated social characteristics were also evaluated to provide a background for the planning of conservation actions. A set of indicators was defined for the measurement of each criterion. To assign priority values for subregions within each main region, an international team of 40 participants evaluated all the indicators using multicriteria decision-making analysis. This procedure enabled the identification of 15 subregions of critical priority, 17 of high priority, and 10 of medium priority; three more were not analysed due to lack of information. The evaluation revealed a number of subjects that had hitherto been undetected and that may prove useful for prioritization efforts in other regions where TMCF is similarly documented and faces equally severe threats. Based on this analysis, key recommendations are outlined to advance conservation objectives in those TMCF areas that are subjected to high pressure on forest resources. Copyright © 2010 Elsevier Ltd. All rights reserved.
Bioactive calcium phosphate coatings on metallic implants
NASA Astrophysics Data System (ADS)
Sedelnikova, M. B.; Komarova, E. G.; Sharkeev, Yu. P.; Tolkacheva, T. V.; Khlusov, I. A.; Sheikin, V. V.
2017-09-01
Biocomposites based on bioinert metals or alloys and bioactive calcium phosphate coatings are a promising tendency of the new-generation implants development. In recent years, the approach of regenerative medicine based on the use of biodegradable biomaterials has been priority direction. Such materials are capable of initiating the bone tissue regeneration and replaced by the newly formed bone. The microarc oxidation (MAO) method allows obtaining the bioactive coatings with a porous structure, special functional properties, and modified by the essential elements. During the last decade, the investigations in the field of the nanostructured biocomposites based on bioinert Ti, Zr, Nb and their alloys with a calcium phosphate coatings deposited by the MAO method have been studied in the Institute of Strength Physics and Materials Science SB RAS, Tomsk. In this article the possibility to produce the bioactive coatings with high antibacterial and osseoconductive properties due to the introduction in the coatings of Zn, Cu, Ag, La, Si elements and wollastonite CaSiO3 was shown. The high hydrophilic and bioresorbed coatings stimulate the processes of osseointegration of the implant into the bone tissue. A promising direction in the field of the medical material science is a development of the metallic implants with good biomechanical compatibility to the bone, such as Ti-Nb alloys with a low elastic modulus that can be classified as biomaterials of the second generation. Zr and its alloys are promising materials for the dentistry and orthopedic surgery due to their high strength and corrosion resistance. Biodegradable Mg alloys are biomaterials of third generation. Such materials can dissolve with a certain speed in human body and excreted from the body thereby excluding the need for reoperation. This article presents the analysis of the study results of bioactive MAO coatings on Ti, Ti-Nb, Zr-Nb and Mg alloys and their promising medical application.
The Leisure Operation. Leisure Management Module. Operational Management Programme.
ERIC Educational Resources Information Center
Carver, Gerry
This module on the leisure operation is intended to enable the reader to develop an understanding of the special requirements and priorities in the development and management of a leisure operation. The material is presented in a self-instructional format in four sections. At the beginning of each section is a statement of the objectives that will…
14 CFR § 1274.936 - Breach of safety or security.
Code of Federal Regulations, 2014 CFR
2014-01-01
... environment. Safety is essential to NASA and is a material part of this contract. NASA's safety priority is to... Occupational Safety and Health Administration (OSHA) or by a state agency operating under an OSHA approved plan... 14 Aeronautics and Space 5 2014-01-01 2014-01-01 false Breach of safety or security. § 1274.936...
E. H. Butler Library Disaster Preparedness Plan.
ERIC Educational Resources Information Center
Vaughan, Barbara; And Others
The plan presented in this manual is designed to minimize the potential for disaster in the E. H. Butler Library at the State University of New York at Buffalo, and to minimize damage to materials in the event of a disaster. In addition to providing an emergency instruction sheet and a disaster contact list, the manual covers salvage priorities,…
ERIC Educational Resources Information Center
Guzey, S. Selcen; Moore, Tamara J.; Harwell, Michael
2016-01-01
Improving K-12 Science, Technology, Engineering, and Mathematics (STEM) education has a priority on numerous education reforms in the United States. To that end, developing and sustaining quality programs that focus on integrated STEM education is critical for educators. Successful implementation of any STEM program is related to the curriculum…
ERIC Educational Resources Information Center
Ander, Roseanna; Guryan, Jonathan; Ludwig, Jens
2016-01-01
Improving the educational outcomes of economically disadvantaged children is a policy priority in the United States, and yet relatively little progress has been made in recent decades. Education reforms that aim to help economically disadvantaged students often focus on improving the quality with which grade-level material is taught, or the…
ERIC Educational Resources Information Center
Rossi, Tony; Tinning, Richard; McCuaig, Louise; Sirna, Karen; Hunter, Lisa
2009-01-01
Much of physical education curriculum in the developed world and specifically in Australia tends to be guided in principle by syllabus documents that represent, in varying degrees, some form of government education priorities. Through the use of critical discourse analysis we analyze one such syllabus example (an official syllabus document of one…
Proceedings of the wellbore sampling workshop
DOE Office of Scientific and Technical Information (OSTI.GOV)
Traeger, R.K.; Harding, B.W.
Representatives from academia, industry and research laboratories participated in an intensive two-day review to identify major technological limitations in obtaining solid and fluid samples from wellbores. Top priorities identified for further development include: coring of hard and unconsolidated materials; flow through fluid samplers with borehole measurements T, P and pH; and nonintrusive interrogation of pressure cores.
Research priorities in occupational safety and health: a review.
Iavicoli, Sergio; Rondinone, Bruna; Marinaccio, Alessandro; Fingerhut, Marilyn
2006-01-01
Changes in the world of work in the last few decades have markedly affected questions regarding occupational safety and health (OSH). Jobs in our economy continue to shift from manufacturing to services. Longer hours, shift work, reduced job security, temporary work are realities in the modern workplace, new chemicals, materials, processes are developed at an ever accelerating pace. The workforce is also changing. It will become older and more racially diverse and women are increasing. These changes present new challenges to protect worker safety and health and it was been indispensable to redefine priorities, by consulting all those involved in OSH. The present study therefore made a critical comparative analysis of the main published projects to identify research priorities in the OSH field, comparing methods, approaches and results. Comparison of the priority areas established in each of these studies is inherently difficult due to differences in socio-cultural backgrounds, in the methods employed to identify priority topics, and the many factors involved. However, it is clear that the Delphi technique is widely used as a reliable method, in that it covers a broad range of qualified witnesses, from a variety of backgrounds--such as trade union representatives and researchers--providing different viewpoints. It also takes account of the intrinsic features of OSH which--compared to other disciplines--involves multidisciplinary factors calling into play a range of scientific settings, such as toxicologists, molecular biologists, epidemiologists, occupational hygienists and occupational physicians. This analysis showed how important it is to reach consensus among all those operating in the OSH sector, in order to establish standard methods that can be applied in different contexts, and give results that can be validly compared.
ERIC Educational Resources Information Center
Dwyer, David J.; Yankee, Everyl
A directory of the 82 African languages given high priority for instruction in the United States contains a profile for each language that includes its classification and where it is spoken, the number of speakers, dialect situation, usage, orthography status, and listings of related human and institutional resources for the purpose of…
ERIC Educational Resources Information Center
Heller, Rafael; Gerwin, Carol
2016-01-01
This brief recommends seven ways for supporters of deeper learning to take advantage of the changing education policy landscape, as authority shifts from the federal government to states and local districts. The authors outline priorities to help the nation's high schools move from a largely inequitable system to one that prepares all students for…
Parents who catastrophize about their child's pain prioritize attempts to control pain.
Caes, Line; Vervoort, Tine; Eccleston, Christopher; Goubert, Liesbet
2012-08-01
How parents respond to their child in pain is critically important to how both parent and child attempt to cope with pain. We examined the influence of parental catastrophic thinking about child pain on their prioritization for pain control. Using a vignette methodology, parents reported, in response to different pain scenarios, on their imagined motivation for 2 competing goals: to control their child's pain (ie, pain control) or to encourage their child's participation in daily activities (ie, activity engagement). The effects of parent gender, pain intensity, and duration on parental goal priority were also explored. Findings indicated that higher levels of parental catastrophic thoughts were associated with the parents prioritizing child pain control over activity engagement. This effect was significantly moderated by pain duration. Specifically, pain control was more of a priority for those high in catastrophic thinking when the pain was more acute. In contrast, parental catastrophic thoughts had no effect on the pain control strategy favored by parents in situations with longer-lasting pain. Furthermore, independently of parental catastrophic thoughts, heightened priority for pain control was observed in highly intense and chronic pain situations. Moreover, in highly intense pain, priority for pain control was stronger for mothers compared with fathers. Theoretical and clinical implications and directions for future research are discussed. Copyright © 2012 International Association for the Study of Pain. Published by Elsevier B.V. All rights reserved.
Delays in Prior Living Kidney Donors Receiving Priority on the Transplant Waiting List
Klassen, David K.; Kucheryavaya, Anna Y.; Stewart, Darren E.
2016-01-01
Background and objectives Prior living donors (PLDs) receive very high priority on the Organ Procurement and Transplantation Network (OPTN) kidney waiting list. Program delays in adding PLDs to the waiting list, setting their status to active, and submitting requests for PLD priority can affect timely access to transplantation. Design, setting, participants, & measurements We used the OPTN and the Centers for Medicare and Medicaid Services data to examine timing of (1) listing relative to start of dialysis, (2) activation on the waiting list, and (3) requests for PLD priority relative to listing date. There were 210 PLDs (221 registrations) added to the OPTN kidney waiting list between January 1, 2010 and July 31, 2015. Results As of September 4, 2015, 167 of the 210 PLDs received deceased donor transplants, six received living donor transplants, two died, five were too sick to transplant, and 29 were still waiting. Median waiting time to deceased donor transplant for PLDs was 98 days. Only 40.7% of 221 PLD registrations (n=90) were listed before they began dialysis; 68.3% were in inactive status for <90 days, 17.6% were in inactive status for 90–365 days, 8.6% were in inactive status for 1–2 years, and 5.4% were in inactive status for >2 years. Median time of PLDs waiting in active status before receiving PLD priority was 2 days (range =0–1450); 67.4% of PLDs received PLD priority within 7 days after activation, but 15.4% waited 8–30 days, 8.1% waited 1–3 months, 4.1% waited 3–12 months, and 5.0% waited >1 year in active status for PLD priority. After receiving priority, most were transplanted quickly. Median time in active status with PLD priority before deceased donor transplant was 23 days. Conclusions Fewer than one half of listed PLDs were listed before starting dialysis. Most listed PLDs are immediately set to active status and receive PLD priority quickly, but a substantial number spends time in active status without PLD priority or a large amount of time in inactive status, which affects access to timely transplants. PMID:27591296
Neutral Mass Spectrometry for Venus Atmosphere and Surface
NASA Technical Reports Server (NTRS)
Mahaffy, Paul
2004-01-01
The nature of the divergent evolution of the terrestrial planets Venus, Earth, and Mars is a fundamental problem in planetary science that is most relevant to understanding the characteristics of small planets we are likely to discover in extrasolar systems and the number of such systems that may support habitable environments. For this reason, the National Research Council's Decadal Survey gives Venus exploration high priority. That report was the basis of the NASA selection of Venus as one of four prime mission targets for the recently initiated New Frontiers Program. If the Decadal Survey priorities are to be realized, in situ Venus exploration must remain a high priority. Remote sensing orbital and in situ atmospheric measurements from entry probe or balloon platforms might be realized under the low cost Discovery missions while both atmospheric and landed surface measurements are envisioned with the intermediate class missions of the New Frontiers Program.
Results from a workshop on research needs for modeling aquifer thermal energy storage systems
NASA Astrophysics Data System (ADS)
Drost, M. K.
1990-08-01
A workshop an aquifer thermal energy storage (ATES) system modeling was conducted by Pacific Northwest Laboratory (PNL). The goal of the workshop was to develop a list of high priority research activities that would facilitate the commercial success of ATES. During the workshop, participants reviewed currently available modeling tools for ATES systems and produced a list of significant issues related to modeling ATES systems. Participants assigned a priority to each issue on the list by voting and developed a list of research needs for each of four high-priority research areas; the need for a feasibility study model, the need for engineering design models, the need for aquifer characterization, and the need for an economic model. The workshop participants concluded that ATES commercialization can be accelerated by aggressive development of ATES modeling tools and made specific recommendations for that development.
Intelligent bandwidth compression
NASA Astrophysics Data System (ADS)
Tseng, D. Y.; Bullock, B. L.; Olin, K. E.; Kandt, R. K.; Olsen, J. D.
1980-02-01
The feasibility of a 1000:1 bandwidth compression ratio for image transmission has been demonstrated using image-analysis algorithms and a rule-based controller. Such a high compression ratio was achieved by first analyzing scene content using auto-cueing and feature-extraction algorithms, and then transmitting only the pertinent information consistent with mission requirements. A rule-based controller directs the flow of analysis and performs priority allocations on the extracted scene content. The reconstructed bandwidth-compressed image consists of an edge map of the scene background, with primary and secondary target windows embedded in the edge map. The bandwidth-compressed images are updated at a basic rate of 1 frame per second, with the high-priority target window updated at 7.5 frames per second. The scene-analysis algorithms used in this system together with the adaptive priority controller are described. Results of simulated 1000:1 bandwidth-compressed images are presented.
Future Directions for Cardiovascular Disease Comparative Effectiveness Research
Hlatky, Mark A; Douglas, Pamela S; Cook, Nakela L; Wells, Barbara; Benjamin, Emelia J; Dickersin, Kay; Goff, David C; Hirsch, Alan T; Hylek, Elaine M; Peterson, Eric; Roger, Véronique L; Selby, Joseph V; Udelson, James E; Lauer, Michael S
2012-01-01
Comparative effectiveness research (CER) aims to provide decision-makers the evidence needed to evaluate the benefits and harms of alternative clinical management strategies. CER has become a national priority, with considerable new research funding allocated. Cardiovascular disease is a priority area for CER. This workshop report provides an overview of CER methods, with an emphasis on practical clinical trials and observational treatment comparisons. The report also details recommendations to the National Heart Lung and Blood Institute for a new framework for evidence development to foster cardiovascular CER, and specific studies to address eight clinical issues identified by the Institute of Medicine as high priorities for cardiovascular CER. PMID:22796257
Modeling Theater Level Logistics For Wargames
1993-12-01
Sea Sparrow SM-1MR SM-2MR SM-2ER HARM AIM-54C AIM-9M AIM-9L AIM-7M AMRAAM AGM-65 AGM-62 Penguin TOW II HELLFIRE Guns: 20MM 20MM/76 25MM 40MM Grenade...Priority: 5 EmerPriority: 1 OutSize: FALSE Name: PENGUIN Class: Ammo ProduceAt: 25.00 Length: 84.00 Width: 24.00 Height: 24.00 Weight: 1500.00 Priority: 4...LowRate 26.000 NoneRate 26.000 PENGUIN StockTo 0.00 Deployment: FALSE HighRate: 0.000 MedRate 0.000 LowRate 0.000 NoneRate 0.000 SH-60F Class: Air
Aguilar Vásquez, Yunin; Aliphat Fernández, Mario Manuel; Caso Barrera, Laura; Del Amo Rodríguez, Silvia; Sánchez Gómez, Maria De Lourdes; Martínez-Carrera, Daniel
2014-09-01
The ever-increasing establishment of landscape mosaics is expressed as a surrounding matrix of agricultural activities, which frames patches or remnants of the original vegetation cover. Conservation actions should be aimed to establish or to increase those interactive systems, which help to maintain the land- scape flow through linkages. Spaces occupied by traditional management systems retain and support this func- tion. In this paper, we used Geographic Information Systems to evaluate the importance of traditionally managed forest units ('acahuales'-coffee plantations) and to assess landscape connectivity in the indigenous Popoluca area of Sierra de los Tuxtlas, Mexico. The cartographic material used to establish the types of vegetation and their coverture included the period 1991-2008. At landscape level, four indices were used to assess the general situation of the habitat network, and to identify the patches of high priority. Individually, indices evaluated if patches were important for their area, their potential flow or their connecting function. Results showed that the landscape is functioning as a single system, but having low connectivity. Values improved when traditionally managed forest patches were considered as viable habitat. We detected 367 patches of very high priority, 80% belonging to forests managed traditionally. Patches were important for their potential flow (size and topologi- cal relationships). Only 70 patches were significant for their function as biological corridors between largest forests located at the top of the volcanoes, and are mostly managed forest (75%). We concluded that the units of traditionally managed forest play a significant role in landscape connectivity maintenance.
Dehghan, Ashraf; Abumasoudi, Rouhollah Sheikh; Ehsanpour, Soheila
2016-01-01
Background: Infertility and errors in the process of its treatment have a negative impact on infertile couples. The present study was aimed to identify and assess the common errors in the reception process by applying the approach of “failure modes and effects analysis” (FMEA). Materials and Methods: In this descriptive cross-sectional study, the admission process of fertility and infertility center of Isfahan was selected for evaluation of its errors based on the team members’ decision. At first, the admission process was charted through observations and interviewing employees, holding multiple panels, and using FMEA worksheet, which has been used in many researches all over the world and also in Iran. Its validity was evaluated through content and face validity, and its reliability was evaluated through reviewing and confirmation of the obtained information by the FMEA team, and eventually possible errors, causes, and three indicators of severity of effect, probability of occurrence, and probability of detection were determined and corrective actions were proposed. Data analysis was determined by the number of risk priority (RPN) which is calculated by multiplying the severity of effect, probability of occurrence, and probability of detection. Results: Twenty-five errors with RPN ≥ 125 was detected through the admission process, in which six cases of error had high priority in terms of severity and occurrence probability and were identified as high-risk errors. Conclusions: The team-oriented method of FMEA could be useful for assessment of errors and also to reduce the occurrence probability of errors. PMID:28194208
NASA Astrophysics Data System (ADS)
Swaraj Pati, Mythili N.; Korde, Pranav; Dey, Pallav
2017-11-01
The purpose of this paper is to introduce an optimised variant to the round robin scheduling algorithm. Every algorithm works in its own way and has its own merits and demerits. The proposed algorithm overcomes the shortfalls of the existing scheduling algorithms in terms of waiting time, turnaround time, throughput and number of context switches. The algorithm is pre-emptive and works based on the priority of the associated processes. The priority is decided on the basis of the remaining burst time of a particular process, that is; lower the burst time, higher the priority and higher the burst time, lower the priority. To complete the execution, a time quantum is initially specified. In case if the burst time of a particular process is less than 2X of the specified time quantum but more than 1X of the specified time quantum; the process is given high priority and is allowed to execute until it completes entirely and finishes. Such processes do not have to wait for their next burst cycle.
Implications of prioritizing HIV cure: new momentum to overcome old challenges in HIV.
Tucker, Joseph D; Gilbertson, Adam; Lo, Ying-Ru; Vitória, Marco
2016-03-03
Curing HIV is a new strategic priority for several major AIDS organizations. In step with this new priority, HIV cure research and related programs are advancing in low, middle, and high-income country settings. This HIV cure momentum may influence existing HIV programs and research priorities. Despite the early stage of ongoing HIV cure efforts, these changes have directly influenced HIV research funding priorities, pilot programs, and HIV messaging. The building momentum to cure HIV infection may synergize with strategic priorities to better identify adults and infants with very early HIV infection. Although HIV cure represents a new goal, many existing programs and research techniques can be repurposed towards an HIV cure. HIV messages focused on engaging communities towards an HIV cure need to be careful to promote ARV adherence and retention within the HIV continuum of care. An increased emphasis within the AIDS field on finding an HIV cure has several important implications. Strengthening connections between HIV cure research and other areas of HIV research may help to catalyze research and facilitate implementation in the future.
Global Priorities for Marine Biodiversity Conservation
Selig, Elizabeth R.; Turner, Will R.; Troëng, Sebastian; Wallace, Bryan P.; Halpern, Benjamin S.; Kaschner, Kristin; Lascelles, Ben G.; Carpenter, Kent E.; Mittermeier, Russell A.
2014-01-01
In recent decades, many marine populations have experienced major declines in abundance, but we still know little about where management interventions may help protect the highest levels of marine biodiversity. We used modeled spatial distribution data for nearly 12,500 species to quantify global patterns of species richness and two measures of endemism. By combining these data with spatial information on cumulative human impacts, we identified priority areas where marine biodiversity is most and least impacted by human activities, both within Exclusive Economic Zones (EEZs) and Areas Beyond National Jurisdiction (ABNJ). Our analyses highlighted places that are both accepted priorities for marine conservation like the Coral Triangle, as well as less well-known locations in the southwest Indian Ocean, western Pacific Ocean, Arctic and Antarctic Oceans, and within semi-enclosed seas like the Mediterranean and Baltic Seas. Within highly impacted priority areas, climate and fishing were the biggest stressors. Although new priorities may arise as we continue to improve marine species range datasets, results from this work are an essential first step in guiding limited resources to regions where investment could best sustain marine biodiversity. PMID:24416151
Global priorities for marine biodiversity conservation.
Selig, Elizabeth R; Turner, Will R; Troëng, Sebastian; Wallace, Bryan P; Halpern, Benjamin S; Kaschner, Kristin; Lascelles, Ben G; Carpenter, Kent E; Mittermeier, Russell A
2014-01-01
In recent decades, many marine populations have experienced major declines in abundance, but we still know little about where management interventions may help protect the highest levels of marine biodiversity. We used modeled spatial distribution data for nearly 12,500 species to quantify global patterns of species richness and two measures of endemism. By combining these data with spatial information on cumulative human impacts, we identified priority areas where marine biodiversity is most and least impacted by human activities, both within Exclusive Economic Zones (EEZs) and Areas Beyond National Jurisdiction (ABNJ). Our analyses highlighted places that are both accepted priorities for marine conservation like the Coral Triangle, as well as less well-known locations in the southwest Indian Ocean, western Pacific Ocean, Arctic and Antarctic Oceans, and within semi-enclosed seas like the Mediterranean and Baltic Seas. Within highly impacted priority areas, climate and fishing were the biggest stressors. Although new priorities may arise as we continue to improve marine species range datasets, results from this work are an essential first step in guiding limited resources to regions where investment could best sustain marine biodiversity.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Not Available
The Norman Poer Farm National Priorities List site is situated in Hancock County, Indiana. Offgrade solvents and paint resin materials were stored on-site in 263 fifty-five gallon drums. The U.S. Environmental Protection Agency removed all the drums and the top six to eight inches of soil at the three drum storage areas in 1983. The Remedial Investigation (RI) conducted after the emergency removal did not show any contamination of the environment on-site or off-site. Based on the available information, the site is considered to be of no public health concern because of the absence of exposure to hazardous substances. Nomore » health study follow-up is indicated at this time.« less
Fagnan, Lyle J; Michaels, LeAnn; Ramsey, Katrina; Shearer, Stefan; Droppers, Oliver; Gallia, Charles
2015-01-01
Responding to quality metrics is an accepted and expected component of the current health care environment. Little is known about which measures physicians identify as a priority when reporting the quality of care to their patients, especially the care of children in rural settings. The objective of this study is for physicians caring for children in rural communities to identify which of the initial core sets of 24 child health quality measures are useful and are a priority for reporting and improving care. A survey was sent to rural Oregon physicians who provide care to children. Of 955 eligible physicians, 172 (18%) completed the survey. The majority of respondents were family physicians (84%), and most respondents (58%) were in private practice. The child health measures stratified into 3 priority tiers: high, medium, and low priority. The top-tier priority measures included childhood immunization status, well-child visits, adolescent immunization status, body mass index assessment, and developmental screening. Dental treatment services, adequate prenatal care, and lower-birth-weight infants were among the lower-tier measures. The priority measures identified by rural family physicians reflect the relevance of the selected measures to their daily practice responsibilities, with missed opportunities to improve community health. © Copyright 2015 by the American Board of Family Medicine.
Identifying priorities for quality improvement at an emergency Department in Ghana.
DeWulf, Annelies; Otchi, Elom H; Soghoian, Sari
2017-08-30
Healthcare quality improvement (QI) is a global priority, and understanding the perspectives of frontline healthcare workers can help guide sustainable and meaningful change. We report a qualitative investigation of emergency department (ED) staff priorities for QI at a tertiary care hospital in Ghana. The aims of the study were to educate staff about the World Health Organization's (WHO) definition of quality in healthcare, and to identify an initial focus for building a departmental QI program. Semi-structured interviews were conducted with ED staff using open-ended questions to probe their understanding and valuation of the six dimensions of quality defined by the WHO. Participants were then asked to rank the dimensions in order of importance for QI. Qualitative responses were thematically analyzed, and ordinal rank-order was determined for quantitative data regarding QI priorities. Twenty (20) members of staff of different cadres participated, including ED physicians, nurses, orderlies, a security officer, and an accountant. A majority of participants (61%) ranked access to emergency healthcare as high priority for QI. Two recurrent themes - financial accessibility and hospital bed availability - accounted for the majority of discussions, each linked to all the dimensions of healthcare quality. ED staff related all of the WHO quality dimensions to their work, and prioritized access to emergency care as the most important area for improvement. Participants expressed a high degree of motivation to improve healthcare quality, and the study helped with the development of a departmental QI program focused on the broad topic of access to ED services.
Cortés, O; Martinez, A M; Cañon, J; Sevane, N; Gama, L T; Ginja, C; Landi, V; Zaragoza, P; Carolino, N; Vicente, A; Sponenberg, P; Delgado, J V
2016-07-01
Criollo pig breeds are descendants from pigs brought to the American continent starting with Columbus second trip in 1493. Pigs currently play a key role in social economy and community cultural identity in Latin America. The aim of this study was to establish conservation priorities among a comprehensive group of Criollo pig breeds based on a set of 24 microsatellite markers and using different criteria. Spain and Portugal pig breeds, wild boar populations of different European geographic origins and commercial pig breeds were included in the analysis as potential genetic influences in the development of Criollo pig breeds. Different methods, differing in the weight given to within- and between-breed genetic variability, were used in order to estimate the contribution of each breed to global genetic diversity. As expected, the partial contribution to total heterozygosity gave high priority to Criollo pig breeds, whereas Weitzman procedures prioritized Iberian Peninsula breeds. With the combined within- and between-breed approaches, different conservation priorities were achieved. The Core Set methodologies highly prioritized Criollo pig breeds (Cr. Boliviano, Cr. Pacifico, Cr. Cubano and Cr. Guadalupe). However, weighing the between- and within-breed components with FST and 1-FST, respectively, resulted in higher contributions of Iberian breeds. In spite of the different conservation priorities according to the methodology used, other factors in addition to genetic information also need to be considered in conservation programmes, such as the economic, cultural or historical value of the breeds involved.
Cortés, O; Martinez, A M; Cañon, J; Sevane, N; Gama, L T; Ginja, C; Landi, V; Zaragoza, P; Carolino, N; Vicente, A; Sponenberg, P; Delgado, J V
2016-01-01
Criollo pig breeds are descendants from pigs brought to the American continent starting with Columbus second trip in 1493. Pigs currently play a key role in social economy and community cultural identity in Latin America. The aim of this study was to establish conservation priorities among a comprehensive group of Criollo pig breeds based on a set of 24 microsatellite markers and using different criteria. Spain and Portugal pig breeds, wild boar populations of different European geographic origins and commercial pig breeds were included in the analysis as potential genetic influences in the development of Criollo pig breeds. Different methods, differing in the weight given to within- and between-breed genetic variability, were used in order to estimate the contribution of each breed to global genetic diversity. As expected, the partial contribution to total heterozygosity gave high priority to Criollo pig breeds, whereas Weitzman procedures prioritized Iberian Peninsula breeds. With the combined within- and between-breed approaches, different conservation priorities were achieved. The Core Set methodologies highly prioritized Criollo pig breeds (Cr. Boliviano, Cr. Pacifico, Cr. Cubano and Cr. Guadalupe). However, weighing the between- and within-breed components with FST and 1-FST, respectively, resulted in higher contributions of Iberian breeds. In spite of the different conservation priorities according to the methodology used, other factors in addition to genetic information also need to be considered in conservation programmes, such as the economic, cultural or historical value of the breeds involved. PMID:27025169
NASA Astrophysics Data System (ADS)
Xue, Bin; Cao, Yi; Wang, Wei
Bacteria are major contaminations in drinking water and healthcare products. Bacteria contamination may cause severe health problems, including food poisoning and diseases. Currently water sterilization and purification methods to remove contaminated bacteria are mainly based on the size-exclusion mechanism. In order to completely remove all bacteria in water, the pore sizes of the membranes or cartilages should be comparable to the size of bacteria, which inevitable leads to high cross-membrane water pressure and slow purification speed. Moreover, the membranes can easily get clogged. Therefore it is highly demanded to develop efficient methods and novel materials for water purification. Recently, Cui and coworker have introduced a bacteria inactivation method with high efficiency and fast purification speed based on a kind of complex materials made of silver nanofibers, carbon nanotubes and cotton, operating in an electric field. With the help of electric field, the bacteria can be efficiently kill when passing through the membrance even the pore sizes are larger than bacteria. Inspired by their work, here we report a proof-of-principle demonstration of bacteria removal using electro-reponsive hydrogels. This work is funded by Six talent peaks project in Jiangsu Province, the National Natural Science Foundation of China (Nos. 11304156, 11334004, 31170813, 81421091 and 91127026), the 973 Program of China (No. 2012CB921801 and 2013CB834100), the Priority Ac.
Perioperative leadership: managing change with insights, priorities, and tools.
Taylor, David L
2014-07-01
The personal leadership of the perioperative director is a critical factor in the success of any change management initiative. This article presents an approach to perioperative nursing leadership that addresses obstacles that prevent surgical departments from achieving high performance in clinical and financial outcomes. This leadership approach consists of specific insights, priorities, and tools: key insights include self-understanding of personal barriers to leadership and accuracy at understanding economic and strategic considerations related to the OR environment; key priorities include creating a customer-centered organization, focusing on process improvement, and concentrating on culture change; and key tools include using techniques (e.g., direct engagement, collaborative leadership) to align surgical organizations with leadership priorities and mitigate specific perioperative management risks. Included in this article is a leadership development plan for perioperative directors. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.
Environmental control technology (ECT) for geothermal processes
DOE Office of Scientific and Technical Information (OSTI.GOV)
Katz, G.
1982-01-01
The objectives of the environmental control technology (ECT) program are to develop research priorities, research new and alternative technologies and to improve economics and performance of ECT systems. The Interagency Geothermal Coordinating Council, Environmental Control Panel developed priorities and obtained industry input during 1980. H/sub 2/S controls, injection monitoring, solid waste characterization and control and subsidence were reviewed as high priority while noise controls were considered low priority. Since geothermal technology is still developing there is a need to continue researching new and alternative ECT. Often ECT systems must be designed for site specific applications and need modification for usemore » of other sites. Most of the US geothermal experience is found at the Geysers, California where H/sub 2/S abatement is required. Various systems have been tested with mixed results. The bottom line is that the economics and performance of H/sub 2/S abatement systems are less than desirable.« less
Emotion strengthens high-priority memory traces but weakens low-priority memory traces.
Sakaki, Michiko; Fryer, Kellie; Mather, Mara
2014-02-01
When people encounter emotional events, their memory for those events is typically enhanced. But it has been unclear how emotionally arousing events influence memory for preceding information. Does emotional arousal induce retrograde amnesia or retrograde enhancement? The current study revealed that this depends on the top-down goal relevance of the preceding information. Across three studies, we found that emotional arousal induced by one image facilitated memory for the preceding neutral item when people prioritized that neutral item. In contrast, an emotionally arousing image impaired memory for the preceding neutral item when people did not prioritize that neutral item. Emotional arousal elicited by both negative and positive pictures showed this pattern of enhancing or impairing memory for the preceding stimulus depending on its priority. These results indicate that emotional arousal amplifies the effects of top-down priority in memory formation.
Priority Planetary Science Missions Identified
NASA Astrophysics Data System (ADS)
Showstack, Randy
2011-03-01
The U.S. National Research Council's (NRC) planetary science decadal survey report, released on 7 March, lays out a grand vision for priority planetary science missions for 2013-2022 within a tightly constrained fiscal environment. The cost-conscious report, issued by NRC's Committee on the Planetary Science Decadal Survey, identifies high-priority flagship missions, recommends a number of potential midsized missions, and indicates support for some smaller missions. The report states that the highest-priority flagship mission for the decade is the Mars Astrobiology Explorer-Cacher (MAX-C)—the first of three components of a NASA/European Space Agency Mars sample return campaign—provided that the mission scope can be reduced so that MAX-C costs no more than $2.5 billion. The currently estimated mission cost of $3.5 billion “would take up a disproportionate near-term share of the overall budget for NASA's Planetary Science Division,” the report notes.
Sustaining “Meaningful Use” of Health Information Technology in Low-Resource Practices
Green, Lee A.; Potworowski, Georges; Day, Anya; May-Gentile, Rachelle; Vibbert, Danielle; Maki, Bruce; Kiesel, Leslie
2015-01-01
PURPOSE The implementation of electronic health records (EHRs) has been extensively studied, but their maintenance once implemented has not. The Regional Extension Center (REC) program provides implementation assistance to priority practices—those with limited financial, technical, and organizational resources—but the assistance is time limited. Our objective was to identify potential barriers to maintenance of meaningful use of EHRs in priority primary care practices using a qualitative observational study for federally qualified health centers (FQHCs) and priority practices in Michigan. METHODS We conducted cognitive task analysis (CTA) interviews and direct observations of health information technology implementation in FQHCs. In addition, we conducted semistructured interviews with implementation specialists serving priority practices to detect emergent themes relevant to maintenance. RESULTS Maintaining EHR technology will require ongoing expert technical support indefinitely beyond implementation to address upgrades and security needs. Maintaining meaningful use for quality improvement will require ongoing support for leadership and change management. Priority practices not associated with larger systems lack access to the necessary technical expertise, financial resources, and leverage with vendors to continue alone. Rural priority practices are particularly challenged, because expertise is often not available locally. CONCLUSIONS Priority practices, especially in rural areas, are at high risk for falling on the wrong side of a “digital divide” as payers and regulators enact increasing expectations for EHR use and information management. For those without affiliation to maintain the necessary expert staff, ongoing support will be needed for those practices to remain viable. PMID:25583887
Sustaining "meaningful use" of health information technology in low-resource practices.
Green, Lee A; Potworowski, Georges; Day, Anya; May-Gentile, Rachelle; Vibbert, Danielle; Maki, Bruce; Kiesel, Leslie
2015-01-01
The implementation of electronic health records (EHRs) has been extensively studied, but their maintenance once implemented has not. The Regional Extension Center (REC) program provides implementation assistance to priority practices-those with limited financial, technical, and organizational resources-but the assistance is time limited. Our objective was to identify potential barriers to maintenance of meaningful use of EHRs in priority primary care practices using a qualitative observational study for federally qualified health centers (FQHCs) and priority practices in Michigan. We conducted cognitive task analysis (CTA) interviews and direct observations of health information technology implementation in FQHCs. In addition, we conducted semistructured interviews with implementation specialists serving priority practices to detect emergent themes relevant to maintenance. Maintaining EHR technology will require ongoing expert technical support indefinitely beyond implementation to address upgrades and security needs. Maintaining meaningful use for quality improvement will require ongoing support for leadership and change management. Priority practices not associated with larger systems lack access to the necessary technical expertise, financial resources, and leverage with vendors to continue alone. Rural priority practices are particularly challenged, because expertise is often not available locally. Priority practices, especially in rural areas, are at high risk for falling on the wrong side of a "digital divide" as payers and regulators enact increasing expectations for EHR use and information management. For those without affiliation to maintain the necessary expert staff, ongoing support will be needed for those practices to remain viable. © 2015 Annals of Family Medicine, Inc.
Towards deep inclusion for equity-oriented health research priority-setting: A working model.
Pratt, Bridget; Merritt, Maria; Hyder, Adnan A
2016-02-01
Growing consensus that health research funders should align their investments with national research priorities presupposes that such national priorities exist and are just. Arguably, justice requires national health research priority-setting to promote health equity. Such a position is consistent with recommendations made by the World Health Organization and at global ministerial summits that health research should serve to reduce health inequalities between and within countries. Thus far, no specific requirements for equity-oriented research priority-setting have been described to guide policymakers. As a step towards the explication and defence of such requirements, we propose that deep inclusion is a key procedural component of equity-oriented research priority-setting. We offer a model of deep inclusion that was developed by applying concepts from work on deliberative democracy and development ethics. This model consists of three dimensions--breadth, qualitative equality, and high-quality non-elite participation. Deep inclusion is captured not only by who is invited to join a decision-making process but also by how they are involved and by when non-elite stakeholders are involved. To clarify and illustrate the proposed dimensions, we use the sustained example of health systems research. We conclude by reviewing practical challenges to achieving deep inclusion. Despite the existence of barriers to implementation, our model can help policymakers and other stakeholders design more inclusive national health research priority-setting processes and assess these processes' depth of inclusion. Copyright © 2016 Elsevier Ltd. All rights reserved.
Kaufman, Nancy J.; Castrucci, Brian C.; Pearsol, Jim; Leider, Jonathon P.; Sellers, Katie; Kaufman, Ira R.; Fehrenbach, Lacy M.; Liss-Levinson, Rivka; Lewis, Melissa; Jarris, Paul E.; Sprague, James B.
2014-01-01
Context: Discipline-specific workforce development initiatives have been a focus in recent years. This is due, in part, to competency-based training standards and funding sources that reinforce programmatic silos within state and local health departments. Objective: National leadership groups representing the specific disciplines within public health were asked to look beyond their discipline-specific priorities and collectively assess the priorities, needs, and characteristics of the governmental public health workforce. Design: The challenges and opportunities facing the public health workforce and crosscutting priority training needs of the public health workforce as a whole were evaluated. Key informant interviews were conducted with 31 representatives from public health member organizations and federal agencies. Interviews were coded and analyzed for major themes. Next, 10 content briefs were created on the basis of priority areas within workforce development. Finally, an in-person priority setting meeting was held to identify top workforce development needs and priorities across all disciplines within public health. Participants: Representatives from 31 of 37 invited public health organizations participated, including representatives from discipline-specific member organizations, from national organizations and from federal agencies. Results: Systems thinking, communicating persuasively, change management, information and analytics, problem solving, and working with diverse populations were the major crosscutting areas prioritized. Conclusions: Decades of categorical funding created a highly specialized and knowledgeable workforce that lacks many of the foundational skills now most in demand. The balance between core and specialty training should be reconsidered. PMID:24667228
Kaufman, Nancy J; Castrucci, Brian C; Pearsol, Jim; Leider, Jonathon P; Sellers, Katie; Kaufman, Ira R; Fehrenbach, Lacy M; Liss-Levinson, Rivka; Lewis, Melissa; Jarris, Paul E; Sprague, James B
2014-01-01
Discipline-specific workforce development initiatives have been a focus in recent years. This is due, in part, to competency-based training standards and funding sources that reinforce programmatic silos within state and local health departments. National leadership groups representing the specific disciplines within public health were asked to look beyond their discipline-specific priorities and collectively assess the priorities, needs, and characteristics of the governmental public health workforce. The challenges and opportunities facing the public health workforce and crosscutting priority training needs of the public health workforce as a whole were evaluated. Key informant interviews were conducted with 31 representatives from public health member organizations and federal agencies. Interviews were coded and analyzed for major themes. Next, 10 content briefs were created on the basis of priority areas within workforce development. Finally, an in-person priority setting meeting was held to identify top workforce development needs and priorities across all disciplines within public health. Representatives from 31 of 37 invited public health organizations participated, including representatives from discipline-specific member organizations, from national organizations and from federal agencies. Systems thinking, communicating persuasively, change management, information and analytics, problem solving, and working with diverse populations were the major crosscutting areas prioritized. Decades of categorical funding created a highly specialized and knowledgeable workforce that lacks many of the foundational skills now most in demand. The balance between core and specialty training should be reconsidered.
Patient and public engagement in priority setting: A systematic rapid review of the literature
Vandall-Walker, Virginia; Mason-Lai, Ping
2018-01-01
Background Current research suggests that while patients are becoming more engaged across the health delivery spectrum, this involvement occurs most often at the pre-preparation stage to identify ‘high-level’ priorities in health ecosystem priority setting, and at the preparation phase for health research. Objective The purpose of this systematic rapid review of the literature is to describe the evidence that does exist in relation to patient and public engagement priority setting in both health ecosystem and health research. Data sources HealthStar (via OVID); CINAHL; Proquest Databases; and Scholar’s Portal. Study eligibility criteria i) published in English; ii) published within the timeframe of 2007—Current (10 years) unless the report/article was formative in synthesizing key considerations of patient engagement in health ecosystem and health research priority setting; iii) conducted in Canada, the US, Europe, UK, Australia/New Zealand, or Scandinavian countries. Study appraisal and synthesis i) Is the research valid, sound, and applicable?; ii) what outcomes can we potentially expect if we implement the findings from this research?; iii) will the target population (i.e., health researchers and practitioners) be able to use this research?. A summary of findings from each of the respective processes was synthesized to highlight key information that would support decision-making for researchers when determining the best priority setting process to apply for their specific patient-oriented research. Results Seventy articles from the UK, US, Canada, Netherlands and Australia were selected for review. Results were organized into two tiers of public and patient engagement in prioritization: Tier 1—Deliberative and Tier 2—Consultative. Highly structured patient and public engagement planning activities include the James Lind Alliance Priority Setting Partnerships (UK), Dialogue Method (Netherlands), Global Evidence Mapping (Australia), and the Deep Inclusion Method/CHoosing All Together (US). Limitations The critical study limitations include challenges in comprehensively identifying the patient engagement literature for review, bias in article selection due to the identified scope, missed information due to a more limited use of exhaustive search strategies (e.g., in-depth hand searching), and the heterogeneity of reported study findings. Conclusion The four public and patient engagement priority setting processes identified were successful in setting priorities that are inclusive and objectively based, specific to the priorities of stakeholders engaged in the process. The processes were robust, strategic and aimed to promote equity in patient voices. Key limitations identified a lack of evaluation data on the success and extent in which patients were engaged. Issues pertaining to feasibility of stakeholder engagement, coordination, communication and limited resources were also considered. PMID:29499043
Priority Questions and Horizon Scanning for Conservation: A Comparative Study
Kark, Salit; Sutherland, William J.; Shanas, Uri; Klass, Keren; Achisar, Hila; Dayan, Tamar; Gavrieli, Yael; Justo-Hanani, Ronit; Mandelik, Yael; Orion, Nir; Pargament, David; Portman, Michelle; Reisman-Berman, Orna; Safriel, Uriel N.; Schaffer, Gad; Steiner, Noa; Tauber, Israel; Levin, Noam
2016-01-01
Several projects aimed at identifying priority issues for conservation with high relevance to policy have recently been completed in several countries. Two major types of projects have been undertaken, aimed at identifying (i) policy-relevant questions most imperative to conservation and (ii) horizon scanning topics, defined as emerging issues that are expected to have substantial implications for biodiversity conservation and policy in the future. Here, we provide the first overview of the outcomes of biodiversity and conservation-oriented projects recently completed around the world using this framework. We also include the results of the first questions and horizon scanning project completed for a Mediterranean country. Overall, the outcomes of the different projects undertaken (at the global scale, in the UK, US, Canada, Switzerland and in Israel) were strongly correlated in terms of the proportion of questions and/or horizon scanning topics selected when comparing different topic areas. However, some major differences were found across regions. There was large variation among regions in the percentage of proactive (i.e. action and response oriented) versus descriptive (non-response oriented) priority questions and in the emphasis given to socio-political issues. Substantial differences were also found when comparing outcomes of priority questions versus horizon scanning projects undertaken for the same region. For example, issues related to climate change, human demography and marine ecosystems received higher priority as horizon scanning topics, while ecosystem services were more emphasized as current priority questions. We suggest that future initiatives aimed at identifying priority conservation questions and horizon scanning topics should allow simultaneous identification of both current and future priority issues, as presented here for the first time. We propose that further emphasis on social-political issues should be explicitly integrated into future related projects. PMID:26815653
Identifying priority areas for ecosystem service management in South African grasslands.
Egoh, Benis N; Reyers, Belinda; Rouget, Mathieu; Richardson, David M
2011-06-01
Grasslands provide many ecosystem services required to support human well-being and are home to a diverse fauna and flora. Degradation of grasslands due to agriculture and other forms of land use threaten biodiversity and ecosystem services. Various efforts are underway around the world to stem these declines. The Grassland Programme in South Africa is one such initiative and is aimed at safeguarding both biodiversity and ecosystem services. As part of this developing programme, we identified spatial priority areas for ecosystem services, tested the effect of different target levels of ecosystem services used to identify priority areas, and evaluated whether biodiversity priority areas can be aligned with those for ecosystem services. We mapped five ecosystem services (below ground carbon storage, surface water supply, water flow regulation, soil accumulation and soil retention) and identified priority areas for individual ecosystem services and for all five services at the scale of quaternary catchments. Planning for individual ecosystem services showed that, depending on the ecosystem service of interest, between 4% and 13% of the grassland biome was required to conserve at least 40% of the soil and water services. Thirty-four percent of the biome was needed to conserve 40% of the carbon service in the grassland. Priority areas identified for five ecosystem services under three target levels (20%, 40%, 60% of the total amount) showed that between 17% and 56% of the grassland biome was needed to conserve these ecosystem services. There was moderate to high overlap between priority areas selected for ecosystem services and already-identified terrestrial and freshwater biodiversity priority areas. This level of overlap coupled with low irreplaceability values obtained when planning for individual ecosystem services makes it possible to combine biodiversity and ecosystem services in one plan using systematic conservation planning. Copyright © 2011 Elsevier Ltd. All rights reserved.
2009-01-01
This article is part of a series written for people responsible for making decisions about health policies and programmes and for those who support these decision makers. Policymakers have limited resources for developing – or supporting the development of – evidence-informed policies and programmes. These required resources include staff time, staff infrastructural needs (such as access to a librarian or journal article purchasing), and ongoing professional development. They may therefore prefer instead to contract out such work to independent units with more suitably skilled staff and appropriate infrastructure. However, policymakers may only have limited financial resources to do so. Regardless of whether the support for evidence-informed policymaking is provided in-house or contracted out, or whether it is centralised or decentralised, resources always need to be used wisely in order to maximise their impact. Examples of undesirable practices in a priority-setting approach include timelines to support evidence-informed policymaking being negotiated on a case-by-case basis (instead of having clear norms about the level of support that can be provided for each timeline), implicit (rather than explicit) criteria for setting priorities, ad hoc (rather than systematic and explicit) priority-setting process, and the absence of both a communications plan and a monitoring and evaluation plan. In this article, we suggest questions that can guide those setting priorities for finding and using research evidence to support evidence-informed policymaking. These are: 1. Does the approach to prioritisation make clear the timelines that have been set for addressing high-priority issues in different ways? 2. Does the approach incorporate explicit criteria for determining priorities? 3. Does the approach incorporate an explicit process for determining priorities? 4. Does the approach incorporate a communications strategy and a monitoring and evaluation plan? PMID:20018110
Lavis, John N; Oxman, Andrew D; Lewin, Simon; Fretheim, Atle
2009-12-16
This article is part of a series written for people responsible for making decisions about health policies and programmes and for those who support these decision makers. Policymakers have limited resources for developing--or supporting the development of--evidence-informed policies and programmes. These required resources include staff time, staff infrastructural needs (such as access to a librarian or journal article purchasing), and ongoing professional development. They may therefore prefer instead to contract out such work to independent units with more suitably skilled staff and appropriate infrastructure. However, policymakers may only have limited financial resources to do so. Regardless of whether the support for evidence-informed policymaking is provided in-house or contracted out, or whether it is centralised or decentralised, resources always need to be used wisely in order to maximise their impact. Examples of undesirable practices in a priority-setting approach include timelines to support evidence-informed policymaking being negotiated on a case-by-case basis (instead of having clear norms about the level of support that can be provided for each timeline), implicit (rather than explicit) criteria for setting priorities, ad hoc (rather than systematic and explicit) priority-setting process, and the absence of both a communications plan and a monitoring and evaluation plan. In this article, we suggest questions that can guide those setting priorities for finding and using research evidence to support evidence-informed policymaking. These are: 1. Does the approach to prioritisation make clear the timelines that have been set for addressing high-priority issues in different ways? 2. Does the approach incorporate explicit criteria for determining priorities? 3. Does the approach incorporate an explicit process for determining priorities? 4. Does the approach incorporate a communications strategy and a monitoring and evaluation plan?
Khan, Nadia; Bacon, Simon L; Khan, Samia; Perlmutter, Sara; Gerlinsky, Carline; Dermer, Mark; Johnson, Lonni; Alves, Finderson; McLean, Donna; Laupacis, Andreas; Pui, Mandy; Berg, Angelique; Flowitt, Felicia
2017-11-01
Patient- and stakeholder-oriented research is vital to improving the relevance of research. The authors aimed to identify the 10 most important research priorities of patients, caregivers, and healthcare providers (family physicians, nurses, nurse practitioners, pharmacists, and dietitians) for hypertension management. Using the James Lind Alliance approach, a national web-based survey asked patients, caregivers, and care providers to submit their unanswered questions on hypertension management. Questions already answered from randomized controlled trial evidence were removed. A priority setting process of patient, caregiver, and healthcare providers then ranked the final top 10 research priorities in an in-person meeting. There were 386 respondents who submitted 598 questions after exclusions. Of the respondents, 78% were patients or caregivers, 29% lived in rural areas, 78% were aged 50 to 80 years, and 75% were women. The 598 questions were distilled to 42 unique questions and from this list, the top 10 research questions prioritized included determining the combinations of healthy lifestyle modifications to reduce the need for antihypertensive medications, stress management interventions, evaluating treatment strategies based on out-of-office blood pressure compared with conventional (office) blood pressure, education tools and technologies to improve patient motivation and health behavior change, management strategies for ethnic groups, evaluating natural and alternative treatments, and the optimal role of different healthcare providers and caregivers in supporting patients with hypertension. These priorities can be used to guide clinicians, researchers, and funding bodies on areas that are a high priority for hypertension management research for patients, caregivers, and healthcare providers. This also highlights priority areas for improved knowledge translation and delivering patient-centered care. ©2017 Wiley Periodicals, Inc.
Crime in woods: role of law enforcement officers in national forests
Joanne F. Tynon; Deborah J. Chavez; Joshua W. R. Baur
2010-01-01
This first nationwide study of US Forest Service (USFS) law enforcement officers (LEOs) examined respondentsâ roles in the USFS, what they perceived as their highest work priority, and what their relationship with the rest of the USFS should be. Results show that LEOs believe they have a high priority for protecting forest users and they believe that National Forest...
Montague, Terrence; Gogovor, Amédé; Marshall, Lucas; Cochrane, Bonnie; Ahmed, Sara; Torr, Emily; Aylen, John; Nemis-White, Joanna
2016-01-01
Canada's health and its care are evolving. Evidence from serial Health Care in Canada surveys of the public and health professionals over the last two decades reveal a persistent sense of care quality, despite an aging population, decreasing levels of good and excellent health, increasing prevalence of chronic illnesses; and sub-optimal access to timely and patient-centred care. Stakeholders are, however, somewhat pessimistic and many sense complete rebuilding, or major changes, may be necessary. To improve access, the primary health concern of all Canadians - increasing medical and nursing school enrolment, and requiring professionals to work in teams - have attracted increasingly high support from both the public and professionals. However, physicians' support lags behind that of nursing, pharmacy and administrative colleagues; and, currently, only a minority of patients and professionals are actively involved in team care programs. Another example in which high levels of support may not necessarily translate into priority implementation of promising interventions is the realm of patient-centred care. The public and all professionals report a very high level of general support for care provided in a caring and respectful manner. However, while the public rank it second in implementation priority, following timely access, the majority of professionals rank it only fourth. By contrast, there is remarkable pan-stakeholder concordance around interventions to improve the overall health system, with the majority of public and professional stakeholders rating the creation of national supply systems as their top priority to expedite the clinical and cost efficiency of new treatments. There is a similar pan-stakeholder concordance around priority of responsibility to drive innovations, the top three being: federal/provincial governments; research hospitals/regional health authorities; and the pharmaceutical industry. In summary, Canadians are at a healthcare crossroads. Population health is decreasing, chronic diseases are increasing and desire for timely access to patient-centred, team-delivered and technology-supported care remain top concerns. Despite some disconnects between theoretical support for, and priority to implement, promising innovations, there is universal support to optimize resources to make things better. And there is concordance around the leadership best suited to lead innovation. Things can be better.
On-chip passive three-port circuit of all-optical ordered-route transmission.
Liu, Li; Dong, Jianji; Gao, Dingshan; Zheng, Aoling; Zhang, Xinliang
2015-05-13
On-chip photonic circuits of different specific functions are highly desirable and becoming significant demands in all-optical communication network. Especially, the function to control the transmission directions of the optical signals in integrated circuits is a fundamental research. Previous schemes, such as on-chip optical circulators, are mostly realized by Faraday effect which suffers from material incompatibilities between semiconductors and magneto-optical materials. Achieving highly functional circuits in which light circulates in a particular direction with satisfied performances are still difficult in pure silicon photonics platform. Here, we propose and experimentally demonstrate a three-port passive device supporting optical ordered-route transmission based on silicon thermo-optic effect for the first time. By injecting strong power from only one port, the light could transmit through the three ports in a strict order (1→2, 2→3, 3→1) while be blocked in the opposite order (1→3, 3→2, 2→1). The blocking extinction ratios and operation bandwidths have been investigated in this paper. Moreover, with compact size, economic fabrication process and great extensibility, this proposed photonic integrated circuit is competitive to be applied in on-chip all-optical information processing systems, such as path priority selector.
On-chip passive three-port circuit of all-optical ordered-route transmission
Liu, Li; Dong, Jianji; Gao, Dingshan; Zheng, Aoling; Zhang, Xinliang
2015-01-01
On-chip photonic circuits of different specific functions are highly desirable and becoming significant demands in all-optical communication network. Especially, the function to control the transmission directions of the optical signals in integrated circuits is a fundamental research. Previous schemes, such as on-chip optical circulators, are mostly realized by Faraday effect which suffers from material incompatibilities between semiconductors and magneto-optical materials. Achieving highly functional circuits in which light circulates in a particular direction with satisfied performances are still difficult in pure silicon photonics platform. Here, we propose and experimentally demonstrate a three-port passive device supporting optical ordered-route transmission based on silicon thermo-optic effect for the first time. By injecting strong power from only one port, the light could transmit through the three ports in a strict order (1→2, 2→3, 3→1) while be blocked in the opposite order (1→3, 3→2, 2→1). The blocking extinction ratios and operation bandwidths have been investigated in this paper. Moreover, with compact size, economic fabrication process and great extensibility, this proposed photonic integrated circuit is competitive to be applied in on-chip all-optical information processing systems, such as path priority selector. PMID:25970855
DOE Office of Scientific and Technical Information (OSTI.GOV)
ROMINE, L.D.
2006-02-01
A systematic approach to closure planning is being implemented at the Hanford Site's Central Plateau to help achieve the goal of closure by the year 2035. The overall objective of Central Plateau remediation is to protect human health and the environment from the significant quantity of contaminated material that resulted from decades of plutonium production in support of the nation's defense. This goal will be achieved either by removing contaminants or placing the residual contaminated materials in a secure configuration that minimizes further migration to the groundwater and reduces the potential for inadvertent intrusion into contaminated sites. The approach tomore » Central Plateau cleanup used three key concepts--closure zones, closure elements, and closure process steps--to create an organized picture of actions required to complete remediation. These actions were merged with logic ties, constraints, and required resources to produce an integrated time-phased schedule and cost profile for Central Plateau closure. Programmatic risks associated with implementation of Central Plateau closure were identified and analyzed. Actions to mitigate the most significant risks are underway while high priority remediation projects continue to make progress.« less
Becker, Steven M
2005-11-01
One of the most innovative aspects of NCRP Report No. 138 (Management of Terrorist Incidents Involving Radioactive Material) was the high priority it accorded to psychosocial and communication issues. While previous discussions of radiological and nuclear terrorism had occasionally referred to these topics, NCRP Report No. 138 was the first report of its kind to recognize the profound challenges posed by these issues and to place them at the heart of preparedness and response efforts. In the years since the report's release, a host of important developments have taken place in relation to psychosocial and communication issues. This paper reviews key changes and advances in five broad areas: (1) training exercises, (2) policy and guidance development, (3) findings on hospital and clinician needs, (4) survey research on public perceptions of radiological terrorism, and (5) risk communication for radiological and nuclear terrorism situations. The article concludes with a discussion of continuing psychosocial and communication challenges, including critical areas needing further attention as the nation moves to meet the threat of terrorism involving radioactive materials.
Zhuo, Shaojie; Shen, Guofeng; Zhu, Ying; Du, Wei; Pan, Xuelian; Li, Tongchao; Han, Yang; Li, Bengang; Liu, Junfeng; Cheng, Hefa; Xing, Baoshan; Tao, Shu
2017-05-01
Sixteen U.S. EPA priority polycyclic aromatic hydrocarbons (PAHs) and eleven non-priority isomers including some dibenzopyrenes were analyzed to evaluate health risk attributable to inhalation exposure to ambient PAHs and contributions of the non-priority PAHs in a megacity Nanjing, east China. The annual average mass concentration of the total 16 EPA priority PAHs in air was 51.1 ± 29.8 ng/m 3 , comprising up to 93% of the mass concentration of all 27 PAHs, however, the estimated Incremental Lifetime Cancer Risk (ILCR) due to inhalation exposure would be underestimated by 63% on average if only accounting the 16 EPA priority PAHs. The risk would be underestimated by 13% if only particulate PAHs were considered, though gaseous PAHs made up to about 70% of the total mass concentration. During the last fifteen years, ambient Benzo[a]pyrene decreased significantly in the city which was consistent with the declining trend of PAHs emissions. Source contributions to the estimated ILCR were much different from the contributions for the total mass concentration, calling for the introduce of important source-oriented risk assessments. Emissions from gasoline vehicles contributed to 12% of the total mass concentration of 27 PAHs analyzed, but regarding relative contributions to the overall health risk, gasoline vehicle emissions contributed 45% of the calculated ILCR. Dibenzopyrenes were a group of non-priority isomers largely contributing to the calculated ILCR, and vehicle emissions were probably important sources of these high molecular weight isomers. Ambient dibenzo[a,l]pyrene positively correlated with the priority PAH Benzo[g,h,i]perylene. The study indicates that inclusion of non-priority PAHs could be valuable for both PAH source apportionment and health risk assessment. Copyright © 2017 Elsevier Ltd. All rights reserved.
Surficial materials in the conterminous United States
Soller, David R.; Reheis, Marith C.
2004-01-01
Introduction: The Earth's bedrock is overlain in many places by a loosely compacted and mostly unconsolidated blanket of sediments in which soils commonly are developed. These sediments generally were eroded from underlying rock, and then were transported and deposited. In places, they exceed 1,000 ft (330 m) in thickness. Where the sediment blanket is absent, bedrock is either exposed or has been weathered to produce a residual soil. This map shows the sediments and the weathered, residual material; for ease of discussion, these are referred to here as 'surficial materials.' Certain areas on this map include a significant number of rock outcrops, which cannot be shown at the scale of the map; this is noted in the 'Description of Map Units' section. Most daily human activities occur on or near the Earth's surface. Homeowners, communities, and governments can make improved decisions about hazard, resource, and environmental issues, when they understand the nature of surficial materials and how they vary from place to place. For example, are the surficial materials upon which a home is built stable enough to resist subsidence or lateral movement during an earthquake? Do these materials support a ground water resource adequate for new homes? Can they adequately filter contaminants and protect buried aquifers both in underlying sediments and in bedrock? Are they suitable for development of a new wetland? Where can we find materials suitable for aggregate? The USGS National Cooperative Geologic Mapping Program (NCGMP) works with the State geological surveys to identify priority areas for mapping of surficial materials (for example, in areas of complex and poorly understood deposits of various sediment types, where metropolitan areas are experiencing rapid growth). To help establish these priorities, a modern, synoptic overview of the geology is needed. This map represents an overview of our current knowledge of the composition and distribution of surficial materials in the conterminous United States. (The map covers only the conterminous U.S. because similar geologic information in digital form was not readily available for Alaska and Hawaii.) The best available map has been a highly generalized depiction at 1:7,500,000-scale (about 120 miles to the inch), prepared for the USGS National Atlas (Hunt, 1979; 1986). This map is compiled at a slightly more detailed scale (about 80 miles to the inch) than Hunt (1979; 1986). We used digital methods, which enabled us to rapidly incorporate the variety of source maps available to us. State-scale geologic maps from the western United States were brought directly into this map, without expending the time needed to resolve interpretive differences among them. Therefore, abrupt changes in surficial materials are indicated along many State boundaries. This of course is an artifact of our compilation technique, and a limitation on its utility. However, this approach supports the basic premise of the map -- to provide an overview of surficial materials, and to identify areas where additional work may be needed in order to resolve scientific issues that can, in turn, lead to improved mapping.
A sample return mission to a pristine NEO submitted to ESA CV 2015-2025
NASA Astrophysics Data System (ADS)
Michel, P.; Barucci, A.
2007-08-01
ESA Cosmic Vision 2015-2025 aims at furthering Europe's achievements in space science, for the benefit of all mankind. ESA' multinational Space Science Advisory Committee prepared the final plan, which contains a selection of themes and priorities. In the theme concerning how the Solar System works, a Near-Earth Object (NEO) sample return mission is indicated among the priorities. Indeed, small bodies, as primitive leftover building blocks of the Solar System formation process, offer clues to the chemical mixture from which the planets formed some 4.6 billion years ago. The Near Earth Objects (NEOs) are representative of the population of asteroids and dead comets and are thought to be similar in many ways to the ancient planetesimal swarms that accreted to form the planets. NEOs are thus fundamentally interesting and highly accessible targets for scientific research and space missions. A sample return space mission to a pristine NEO has thus been proposed in partnership with the Japanese Space Agency JAXA, involving a large European community of scientists. The principal objectives are to obtained crucial information about 1) the properties of the building blocks of the terrestrial planets; 2) the major events (e.g. agglomeration, heating, ... .) which ruled the history of planetesimals; 3) the properties of primitive asteroids which may contain presolar material unknown in meteoritic samples; 4) the organics in primitive materials; 5) the initial conditions and evolution history of the solar nebula; and 6) on the potential origin of molecules necessary for life. This project appears clearly to have the potential to revolutionize our understanding of primitive materials. It involves a main spacescraft which will allow the determination of important physical properties of the target (shape, mass, crater distribution . . . ) and which will take samples by a touch-and-go procedure, a Lander for in-situ investigation of the sampling site, and sampling depending on technological development and resource allocations, a re-entry capsule, and scientific payloads. We will present the mission targets, scenarios and techniques that have been proposed.
ERIC Educational Resources Information Center
Canadian Teachers' Federation (NJ1), 2009
2009-01-01
The Canadian Teachers' Federation (CTF) is an active member of various coalitions and networks working to enhance the well-being of Canadian children and youth, including the National Alliance for Children and Youth and Campaign 2000. Among CTF's priorities is to support teachers and teachers' organizations as strong advocates for social justice,…
Jo Anne Shatkin; Kimberly J. Ong; James D. Ede; Theodore H. Wegner; Michael Goergen
2016-01-01
Commercialization of cellulose nanomaterials (CNs) is rapidly advancing, to the benefit of many end-use product sectors, and providing information about the safe manufacturing and handling for CNs is a priority. Safety Data Sheets (SDS) are required for industrially produced materials to communicate information on their potential health, fire, reactivity, and...
Making connections beyond the choir
David Johns
2007-01-01
Conservationists rely heavily on support from sectors of the population that want wildlife and wild places protected, but for whom it is not a priority. Support for conservation is widespread but not deep and seems to be weakening. This must be changed. Some of the obstacles are materialâsuch as, fewer people have spent any part of their childhood immersed in nature....
White, Eric S; Borok, Zea; Brown, Kevin K; Eickelberg, Oliver; Guenther, Andreas; Jenkins, R Gisli; Kolb, Martin; Martinez, Fernando J; Roman, Jesse; Sime, Patricia
2016-04-01
Pulmonary fibrosis encompasses a group of lung-scarring disorders that occur owing to known or unknown insults and accounts for significant morbidity and mortality. Despite intense investigation spanning decades, much remains to be learned about the natural history, pathophysiology, and biologic mechanisms of disease. To identify the most pressing research needs in the lung fibrosis community and to provide a roadmap of priorities to investigators, funding agencies, patient advocacy groups, and other interested stakeholders. An ad hoc international working group of the American Thoracic Society with experience in clinical, translational, and bench-based research in fibrotic lung diseases was convened. The group used an iterative consensus process to identify successes and challenges in pulmonary fibrosis research. The group identified five main priority areas in which substantial resources should be invested to advance our understanding and to develop novel therapies for patients with pulmonary fibrosis. These priorities include develop newer models of human lung fibrosis, engage current and new stakeholders to provide sustained funding for the initiatives, create a global infrastructure for storing patient-derived materials, establish collaborative preclinical and clinical research networks in fibrotic lung disease, and create a global lung fibrosis initiative that unites these multifaceted efforts into a single virtual umbrella structure. Despite recent advances in the treatment of some forms of lung fibrosis, many gaps in knowledge about natural history, pathophysiology, and treatment remain. Investment in the research priorities enumerated above will help address these shortcomings and enhance patient care worldwide.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Gualtieri, Alessandro F., E-mail: alessandro.gualtieri@unimore.it; Giacobbe, Carlotta; Sardisco, Lorenza
Recycling of secondary raw materials is a priority of waste handling in the countries of the European community. A potentially important secondary raw material is the product of the thermal transformation of cement-asbestos, produced by prolonged annealing at 1200-1300 {sup o}C. The product is chemically comparable to a Mg-rich clinker. Previous work has assured the reliability of the transformation process. The current challenge is to find potential applications as secondary raw material. Recycling of thermally treated asbestos-containing material (named KRY.AS) in traditional ceramics has already been studied with successful results. The results presented here are the outcome of a longmore » termed project started in 2005 and devoted to the recycling of this secondary raw materials in various industrial applications. KRY.AS can be added in medium-high percentages (10-40 wt%) to commercial mixtures for the production of clay bricks, rock-wool glasses for insulation as well as Ca-based frits and glass-ceramics for the production of ceramic tiles. The secondary raw material was also used for the synthesis of two ceramic pigments; a green uvarovite-based pigment [Ca{sub 3}Cr{sub 2}(SiO{sub 4}){sub 3}] and a pink malayaite-based pigment [Ca(Sn,Cr)SiO{sub 5}]. The latter is especially interesting as a substitute for cadmium-based pigments. This work also shows that KRY.AS can replace standard fillers in polypropylene plastics without altering the properties of the final product. For each application, a description and relevant results are presented and discussed.« less
Castell, S; Hauer, B; Manissero, D; Ulrichs, T; Zaleskis, R; Loddenkemper, R
2010-07-01
The global tuberculosis (TB) situation has deteriorated dramatically since the beginning of the 1990s. In 2007, the WHO identified 18 countries of the WHO European Region as 'high priority countries' and introduced a plan for these countries to improve the situation. To further promote solutions a WHO European Ministerial Forum 'All against Tuberculosis' took place in Berlin in 2007 and resulted in the 'Berlin Declaration' which was commonly endorsed. In October 2009 a meeting was organized by the German Ministry of Health under the title "Berlin Declaration on Tuberculosis: High Level Follow-Up of High Priority Countries for TB Control in the WHO-EURO Region 'Double Trouble or Double Success? Bringing together Diseases and Programs'". This article summarizes the symposium. Besides reporting on the recent epidemiological situation of the WHO-EURO Region (with partly dramatically developments) presentations on psychosocial issues, the role of the EU and the 'Global Fund to Fight AIDS, Tuberculosis and Malaria', the importance of new tools for the fight against tuberculosis and the need for further political commitment were given. Copyright Georg Thieme Verlag KG Stuttgart . New York.
Indoor Air Quality in High Performance Schools
High performance schools are facilities that improve the learning environment while saving energy, resources, and money. The key is understanding the lifetime value of high performance schools and effectively managing priorities, time, and budget.
Indoor Air Quality in High Performance Schools
2017-02-14
High performance schools are facilities that improve the learning environment while saving energy, resources, and money. The key is understanding the lifetime value of high performance schools and effectively managing priorities, time, and budget.
Communication System and Method
NASA Technical Reports Server (NTRS)
Sanders, Adam M. (Inventor); Strawser, Philip A. (Inventor)
2014-01-01
A communication system for communicating over high-latency, low bandwidth networks includes a communications processor configured to receive a collection of data from a local system, and a transceiver in communication with the communications processor. The transceiver is configured to transmit and receive data over a network according to a plurality of communication parameters. The communications processor is configured to divide the collection of data into a plurality of data streams; assign a priority level to each of the respective data streams, where the priority level reflects the criticality of the respective data stream; and modify a communication parameter of at least one of the plurality of data streams according to the priority of the at least one data stream.
NASA Astrophysics Data System (ADS)
Ramli, Razamin; Cheng, Kok-Min
2014-07-01
One of the important areas of concern in order to obtain a competitive level of productivity in a manufacturing system is the layout design and material transportation system (conveyor system). However, changes in customers' requirements have triggered the need to design other alternatives of the manufacturing layout for existing production floor. Hence, this paper discusses effective alternatives of the process layout specifically, the conveyor system layout. Subsequently, two alternative designs for the conveyor system were proposed with the aims to increase the production output and minimize space allocation. The first proposed layout design includes the installation of conveyor oven in the particular manufacturing room based on priority, and the second one is the one without the conveyor oven in the layout. Simulation technique was employed to design the new facility layout. Eventually, simulation experiments were conducted to understand the performance of each conveyor layout design based on operational characteristics, which include predicting the output of layouts. Utilizing the Analytic Hierarchy Process (AHP), the newly and improved layout designs were assessed before the final selection was done. As a comparison, the existing conveyor system layout was included in the assessment process. Relevant criteria involved in this layout design problem were identified as (i) usage of space of each design, (ii) operator's utilization rates, (iii) return of investment (ROI) of the layout, and (iv) output of the layout. In the final stage of AHP analysis, the overall priority of each alternative layout was obtained and thus, a selection for final use by the management was made based on the highest priority value. This efficient planning and designing of facility layout in a particular manufacturing setting is able to minimize material handling cost, minimize overall production time, minimize investment in equipment, and optimize utilization of space.
NASA LaRC Hazardous Material Pharmacy
NASA Technical Reports Server (NTRS)
Esquenet, Remy
1995-01-01
In 1993-1994 the Office of Environmental Engineering contracted SAIC to develop NASA Langley's Pollution Prevention (P2) Program. One of the priority projects identified in this contract was the development of a hazardous waste minimization (HAZMIN)/hazardous materials reutilization (HAZMART) program in the form of a Hazardous Materials Pharmacy. A hazardous materials pharmacy is designed to reduce hazardous material procurement costs and hazardous waste disposal costs. This is accomplished through the collection and reissue of excess hazardous material. Currently, a rarely used hazardous material may be stored in a shop area, unused, until it passes its expiration date. The material is then usually disposed of as a hazardous waste, often at a greater expense than the original cost of the material. While this material was on the shelf expiring, other shop areas may have ordered new supplies of the same material. The hazardous material pharmacy would act as a clearinghouse for such materials. Material that is not going to be used would be turned in to the pharmacy. Other users could then be issued this material free of charge, thereby reducing procurement costs. The use of this material by another shop prevents it from expiring, thereby reducing hazardous waste disposal costs.
Treadwell, Henrie M.
2009-01-01
Prisoners, ex-offenders, and the communities they belong to constitute a distinct and highly vulnerable population, and research must be sensitive to their priorities. In light of recent suggestions that scientific experimentation involving prisoners be reconsidered, community-based participatory research can be a valuable tool for determining the immediate concerns of prisoners, such as the receipt of high-quality and dignified health care inside and outside prisons. In building research agendas, more must be done to ensure the participation of communities affected by the resulting policies. PMID:19141599