[The establishment and application of internal quality control system for real-time quantitative PCR detection of BCR-ABL (P210) transcript levels].

PubMed

Zhong, C Q; He, N; Hua, M Q; Wei, X D; Ma, D X; Ji, C Y

2016-09-14

Objective: To set internal quality control system of BCR-ABL (P210) transcript levels for real-time quantitative PCR (RQ-PCR). Methods: Using K562 cells and HL-60 cells, we prepared high- and low-level BCR-ABL internal quality control substance. The BCR-ABL (P210) transcript levels of internal quality control substance have been determined for 184 times together with clinical samples from August 2013 to October 2015. The slope rate, intercept and correlation coefficient of standard curve were calculated according to different reagent lots (lots number 20130303, 20131212, 20140411 and 20150327 are called R1、R2、R3 and R4 for short respectively), and the detection results of quality control substance were calculated according to different reagent lots and quality control substance lots (lots number 20130725, 20140611 are called Q1、Q2 for short respectively). Then the results were analyzed by Levey-Jennings quality control chart combined with Westgard multi-rules theory. Results: ①We analyzed the slope rate and intercept of standard curve. Fifty-three times of the R1 reagent detection, 80 times of the R3 reagent detection and 14 times of the R4 reagent detection were all under control. For 37 times detection of R2 reagent, the slope rate was out of control for 6 times. It was lower than x - s for the 2-8 tests and upper the average for the 12-37 tests. The intercept was out of control for 9 times, upper the x + s for the 1-8 tests and lower the average for the 12-37 tests. ② According to the detection results of quality control substance, for Q1 quality control substance, 49 tests by R1 reagent were under control, and 1 out of 23 tests by R2 reagent was out of control. For Q2 quality control substance, 14 tests by R2 reagent detection, 72 tests by R3 reagent detection and 14 tests by R4 reagent were all under control. Conclusion: The preparation of high- and low-level quality control substance using K562 and HL-60 cells was convenient and the detection results were reliable and stable. The application of quality control substance combined with slope rate and intercept in the internal quality control may contribute to quality assurance for quantitative detection of BCR-ABL (P210) transcript levels.

Quantity and quality assessment of randomized controlled trials on orthodontic practice in PubMed.

PubMed

Shimada, Tatsuo; Takayama, Hisako; Nakamura, Yoshiki

2010-07-01

To find current high-quality evidence for orthodontic practice within a reasonable time, we tested the performance of a PubMed search. PubMed was searched using publication type randomized controlled trial and medical subject heading term "orthodontics" for articles published between 2003 and 2007. The PubMed search results were compared with those from a hand search of four orthodontic journals to determine the sensitivity of PubMed search. We evaluated the precision of the PubMed search result and assessed the quality of individual randomized controlled trials using the Jadad scale. Sensitivity and precision were 97.46% and 58.12%, respectively. In PubMed, of the 277 articles retrieved, 161 (58.12%) were randomized controlled trials on orthodontic practice, and 115 of the 161 articles (71.42%) were published in four orthodontic journals: American Journal of Orthodontics and Dentofacial Orthopedics, The Angle Orthodontist, the European Journal of Orthodontics, and the Journal of Orthodontics. Assessment by the Jadad scale revealed 60 high-quality randomized controlled trials on orthodontic practice, of which 45 (75%) were published in these four journals. PubMed is a highly desirable search engine for evidence-based orthodontic practice. To stay current and get high-quality evidence, it is reasonable to look through four orthodontic journals: American Journal of Orthodontics and Dentofacial Orthopedics, The Angle Orthodontist, the European Journal of Orthodontics, and the Journal of Orthodontics.

External Quality Control Review of the Defense Information Systems Agency Audit Organization

DTIC Science & Technology

2012-08-07

We are providing this report for your information and use. We have reviewed the system of quality control for the audit organization of the Defense...audit organization encompasses the audit organization’s leadership, emphasis on performing high quality work, and policies and procedures established

CTEPP STANDARD OPERATING PROCEDURE FOR CONDUCTING INTERNAL FIELD AUDITS AND QUALITY CONTROL (SOP-2.25)

EPA Science Inventory

This SOP describes the method for conducting internal field audits and quality control procedures. Internal field audits will be conducted to ensure the collection of high quality data. Internal field audits will be conducted by Field Auditors (the Field QA Officer and the Field...

Dysfunctional beliefs, stress and sleep disturbance in fibromyalgia.

PubMed

Theadom, Alice; Cropley, Mark

2008-05-01

To explore sleep-related dysfunctional beliefs, stress levels and sleep quality in patients with fibromyalgia in comparison to healthy controls. One hundred sixty-six participants (83 patients with fibromyalgia and 83 healthy controls) completed self-report measures exploring beliefs and attitudes about sleep, perceived stress, sleep quality and levels of pain and fatigue. Relative to healthy controls, patients with fibromyalgia revealed significantly higher levels of dysfunctional beliefs and attitudes about sleep and perceived stress. High dysfunctional beliefs were significantly associated with poorer sleep quality and high perceived stress was significantly related to higher sleep disturbances and daytime dysfunction. Beliefs about sleep and perceived stress play a significant role in the sleep quality of patients with fibromyalgia. Interventions to improve sleep quality for people with fibromyalgia need to identify and address dysfunctional beliefs about sleep and incorporate stress management approaches.

In-situ and real-time growth observation of high-quality protein crystals under quasi-microgravity on earth.

PubMed

Nakamura, Akira; Ohtsuka, Jun; Kashiwagi, Tatsuki; Numoto, Nobutaka; Hirota, Noriyuki; Ode, Takahiro; Okada, Hidehiko; Nagata, Koji; Kiyohara, Motosuke; Suzuki, Ei-Ichiro; Kita, Akiko; Wada, Hitoshi; Tanokura, Masaru

2016-02-26

Precise protein structure determination provides significant information on life science research, although high-quality crystals are not easily obtained. We developed a system for producing high-quality protein crystals with high throughput. Using this system, gravity-controlled crystallization are made possible by a magnetic microgravity environment. In addition, in-situ and real-time observation and time-lapse imaging of crystal growth are feasible for over 200 solution samples independently. In this paper, we also report results of crystallization experiments for two protein samples. Crystals grown in the system exhibited magnetic orientation and showed higher and more homogeneous quality compared with the control crystals. The structural analysis reveals that making use of the magnetic microgravity during the crystallization process helps us to build a well-refined protein structure model, which has no significant structural differences with a control structure. Therefore, the system contributes to improvement in efficiency of structural analysis for "difficult" proteins, such as membrane proteins and supermolecular complexes.

Zerodur polishing process for high surface quality and high efficiency

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tesar, A.; Fuchs, B.

1992-08-01

Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of

[Effect of kuntai capsule on the number of retrieved oocytes, high-quality oocytes and embryos in in vitro fertilization of poor ovarian response patients].

PubMed

Lian, Fang; Jiang, Xiao-Yuan

2014-08-01

To observe the effect of Kuntai Capsule (KC) on the number of retrieved oocytes, the quality of high-quality oocytes and embryos in in vitro fertilization of poor ovarian response (POR) patients. Totally 70 POR patients preparing for in vitro fertilization-embryo transfer (IVF-ET) were randomly assigned to the observation group and the control group, 35 cases in each group. KC was administered to patients in the observation group in the preparation cycle (i.e., three menstrual cycles before IVF-ET) and during the superovulation process. Those in the control group took placebo during this period. Before and after medication the improvement of Shen yin deficiency syndrome (SYDS) was observed in the two groups. The basal follicle-stimulating hormone (bFSH), luteinizing hormone (LH), estradiol (E2), anti-Mullerian hormone (AMH), the ratio of FSH to LH, and antral follicle count (AFC) were observed. Besides, the E2 level of a single ovum on the day of HCG injection, the number of retrieved oocytes, the high-quality oocyte rate, and the high-quality embryos were observed. Compared with the control group, the SYDS, decreased bFSH and LH levels, increased ACF numbers, the E2 level of a single ovum on the day of HCG injection, the number of retrieved oocytes, high-quality oocytes, and high-quality embryos were superior in the observation group (P < 0.05). There was no statistical difference in the decreased FSH/LH level (P > 0.05). E2 and AMH increased after medication of KC in the observation group, while they decreased after administration of placebos in the control group. There was statistical difference in the post-pre treatment difference of E2 and AMH between the two groups (P < 0.05). KC could increase the number of retrieved oocytes, and elevate the quality of occytes and embryos in the IVF-ET.

High perfomance liquid chromatography fingerprint analysis for quality control of brotowali (Tinospora crispa)

NASA Astrophysics Data System (ADS)

Syarifah, V. B.; Rafi, M.; Wahyuni, W. T.

2017-05-01

Brotowali (Tinospora crispa) is widely used in Indonesia as ingredient of herbal medicine formulation. To ensure the quality, safety, and efficacy of herbal medicine products, its chemical constituents should be continuously evaluated. High performance liquid chromatography (HPLC) fingerprint is one of powerful technique for this quality control process. In this study, HPLC fingerprint analysis method was developed for quality control of brotowali. HPLC analysis was performed in C18 column and detection was performed using photodiode array detector. The optimum mobile phase for brotowali fingerprint was acetonitrile (ACN) and 0.1% formic acid in gradient elution mode at a flow rate of 1 mL/min. The number of peaks detected in HPLC fingerprint of brotowali was 32 peaks and 23 peaks for stems and leaves, respectively. Berberine as marker compound was detected at retention time of 20.525 minutes. Evaluation of analytical performance including precision, reproducibility, and stability prove that this HPLC fingerprint analysis was reliable and could be applied for quality control of brotowali.

The process of managerial control in quality improvement initiatives.

PubMed

Slovensky, D J; Fottler, M D

1994-11-01

The fundamental intent of strategic management is to position an organization with in its market to exploit organizational competencies and strengths to gain competitive advantage. Competitive advantage may be achieved through such strategies as low cost, high quality, or unique services or products. For health care organizations accredited by the Joint Commission on Accreditation of Healthcare Organizations, continually improving both processes and outcomes of organizational performance--quality improvement--in all operational areas of the organization is a mandated strategy. Defining and measuring quality and controlling the quality improvement strategy remain problematic. The article discusses the nature and processes of managerial control, some potential measures of quality, and related information needs.

Integrated Aerodynamic and Control System Design of Oblique Wing Aircraft. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Morris, Stephen James

1990-01-01

An efficient high speed aircraft design must achieve a high lift to drag ratio at transonic and supersonic speeds. In 1952 Dr. R. T. Jones proved that for any flight Mach number minimum drag at a fixed lift is achieved by an elliptic wing planform with an appropriate oblique sweep angle. Since then, wind tunnel tests and numerical flow models have confirmed that the compressibility drag of oblique wing aircraft is lower than similar symmetrical sweep designs. At oblique sweep angles above thirty degrees the highly asymmetric planform gives rise to aerodynamic and inertia couplings which affect stability and degrade the aircraft's handling qualities. In the case of the NASA-Rockwell Oblique Wing Research Aircraft, attempts to improve the handling qualities by implementing a stability augmentation system have produced unsatisfactory results because of an inherent lack of controllability in the proposed design. The present work focuses on improving the handling qualities of oblique wing aircraft by including aerodynamic configuration parameters as variables in the control system synthesis to provide additional degrees of freedom with which to further decouple the aircraft's response. Handling qualities are measured using a quadratic cost function identical to that considered in optimal control problems, but the controller architecture is not restricted to full state feedback. An optimization procedure is used to simultaneously solve for the aircraft configuration and control gains which maximize a handling qualities measure, while meeting imposed constraints on trim. In some designs wing flexibility is also modeled and reduced order controllers are implemented. Oblique wing aircraft synthesized by this integrated design method show significant improvement in handling qualities when compared to the originally proposed closed loop aircraft. The integrated design synthesis method is then extended to show how handling qualities may be traded for other types of mission performance (drag, weight, etc.). Examples are presented which show how performance can be maximized while maintaining a desired level of handling quality.

Active tuning of high-Q dielectric metasurfaces

DOE PAGES

Parry, Matthew; Komar, Andrei; Hopkins, Ben; ...

2017-08-02

Here, we demonstrate the active tuning of all-dielectric metasurfaces exhibiting high-quality factor (high-Q) resonances. The active control is provided by embedding the asymmetric silicon meta-atoms with liquid crystals, which allows the relative index of refraction to be controlled through heating. It is found that high quality factor resonances (Q = 270 ± 30) can be tuned over more than three resonance widths. Our results demonstrate the feasibility of using all-dielectric metasurfaces to construct tunable narrow-band filters.

A design procedure for the handling qualities optimization of the X-29A aircraft

NASA Technical Reports Server (NTRS)

Bosworth, John T.; Cox, Timothy H.

1989-01-01

A design technique for handling qualities improvement was developed for the X-29A aircraft. As with any new aircraft, the X-29A control law designers were presented with a relatively high degree of uncertainty in their mathematical models. The presence of uncertainties, and the high level of static instability of the X-29A caused the control law designers to stress stability and robustness over handling qualities. During flight test, the mathematical models of the vehicle were validated or corrected to match the vehicle dynamic behavior. The updated models were then used to fine tune the control system to provide fighter-like handling characteristics. A design methodology was developed which works within the existing control system architecture to provide improved handling qualities and acceptable stability with a minimum of cost in both implementation as well as software verification and validation.

HPTLC Fingerprint Analysis: A Quality Control for Authentication of Herbal Phytochemicals

NASA Astrophysics Data System (ADS)

Ram, Mauji; Abdin, M. Z.; Khan, M. A.; Jha, Prabhakar

Authentication and consistent quality are the basic requirement for Indian traditional medicine (TIM), Chinese traditional herbal medicine (TCHM), and their commercial products, regardless of the kind of research conducted to modernize the TIM and TCHM. The complexities of TIM and TCHM challenge the current official quality control mode, for which only a few biochemical markers were selected for identification and quantitative assay. Referring too many unknown factors existed in TIM and TCHM, it is impossible and unnecessary to pinpoint qualitatively and quantitatively every single component contained in the herbal drug. Chromatographic fingerprint is a rational option to meet the need for more effective and powerful quality assessment to TIM and TCHM. The optimized chromatographic fingerprint is not only an alternative analytical tool for authentication, but also an approach to express the various pattern of chemical ingredients distribution in the herbal drugs and preserve such "database" for further multifaced sustainable studies. Analytical separation techniques, for example, high-performance liquid chromatography (HPLC), gas chromatography (GC) and mass spectrometry (MS) were among the most popular methods of choice used for quality control of raw material and finished herbal product. Fingerprint analysis approach using high-performance thin-layer chromatography (HPTLC) has become the most potent tool for quality control of herbal medicines because of its simplicity and reliability. It can serve as a tool for identification, authentication, and quality control of herbal drugs. In this chapter, attempts are being made to expand the use of HPTLC and at the same time create interest among prospective researcher in herbal analysis. The developed method can be used as a quality control tool for rapid authentication from a wide variety of herbal samples. Some examples demonstrated the role of fingerprinting in quality control and assessment.

Field Performance of High-Quality and Standard Northern Red Oak Seedlings in Tennessee

Treesearch

David S. Buckley

2002-01-01

First-year performance of high-quality (HQ), high-quality cull (HQC) and standard (ST) northern red oak (Quercus rubra) nursery seedlings was compared in a study established in a recent clearcut in mid-March, 2000. Objectives were to test effects of 1) seedling type, 2) planting treatment, and 3) control of competitors on the growth, browsing, and...

Generation of Quality Pulses for Control of Qubit/Quantum Memory Spin States: Experimental and Simulation

DTIC Science & Technology

2016-09-01

TECHNICAL REPORT 3046 September 2016 GENERATION OF QUALITY PULSES FOR CONTROL OF QUBIT/QUANTUM MEMORY SPIN STATES: EXPERIMENTAL AND SIMULATION...nuclear spin states of qubits/quantum memory applicable to semiconductor, superconductor, ionic, and superconductor-ionic hybrid technologies. As the...pulse quality and need for development of single pulses with very high quality will impact directly the coherence time of the qubit/ memory , we present

ISO 9002 as Literacy Practice: Coping with Quality-Control Documents in a High-Tech Company

ERIC Educational Resources Information Center

Kleifgen, Jo Anne

2005-01-01

This study describes the process by which a circuit board manufacturing company became certified in an international quality control program known as ISO 9002. Particular attention is paid to how quality documents were made and used in actual practice and to the relationship between these standardized procedures (official literacies) and…

High-Performance Integrated Control of water quality and quantity in urban water reservoirs

NASA Astrophysics Data System (ADS)

Galelli, S.; Castelletti, A.; Goedbloed, A.

2015-11-01

This paper contributes a novel High-Performance Integrated Control framework to support the real-time operation of urban water supply storages affected by water quality problems. We use a 3-D, high-fidelity simulation model to predict the main water quality dynamics and inform a real-time controller based on Model Predictive Control. The integration of the simulation model into the control scheme is performed by a model reduction process that identifies a low-order, dynamic emulator running 4 orders of magnitude faster. The model reduction, which relies on a semiautomatic procedural approach integrating time series clustering and variable selection algorithms, generates a compact and physically meaningful emulator that can be coupled with the controller. The framework is used to design the hourly operation of Marina Reservoir, a 3.2 Mm3 storm-water-fed reservoir located in the center of Singapore, operated for drinking water supply and flood control. Because of its recent formation from a former estuary, the reservoir suffers from high salinity levels, whose behavior is modeled with Delft3D-FLOW. Results show that our control framework reduces the minimum salinity levels by nearly 40% and cuts the average annual deficit of drinking water supply by about 2 times the active storage of the reservoir (about 4% of the total annual demand).

Quality assessment concept of the World Data Center for Climate and its application to CMIP5 data

NASA Astrophysics Data System (ADS)

Stockhause, M.; Höck, H.; Toussaint, F.; Lautenschlager, M.

2012-08-01

The preservation of data in a high state of quality which is suitable for interdisciplinary use is one of the most pressing and challenging current issues in long-term archiving. For high volume data such as climate model data, the data and data replica are no longer stored centrally but distributed over several local data repositories, e.g. the data of the Climate Model Intercomparison Project Phase 5 (CMIP5). The most important part of the data is to be archived, assigned a DOI, and published according to the World Data Center for Climate's (WDCC) application of the DataCite regulations. The integrated part of WDCC's data publication process, the data quality assessment, was adapted to the requirements of a federated data infrastructure. A concept of a distributed and federated quality assessment procedure was developed, in which the workload and responsibility for quality control is shared between the three primary CMIP5 data centers: Program for Climate Model Diagnosis and Intercomparison (PCMDI), British Atmospheric Data Centre (BADC), and WDCC. This distributed quality control concept, its pilot implementation for CMIP5, and first experiences are presented. The distributed quality control approach is capable of identifying data inconsistencies and to make quality results immediately available for data creators, data users and data infrastructure managers. Continuous publication of new data versions and slow data replication prevents the quality control from check completion. This together with ongoing developments of the data and metadata infrastructure requires adaptations in code and concept of the distributed quality control approach.

Risk alignment in health care quality and financing: optimizing value.

PubMed

Granata, A V

1998-01-01

How should health care best consolidate rational cost control while preserving and enhancing quality? That is, how can a system best optimize value? A limitation of many current health management modalities may be that the power to control health spending has been expropriated from physician providers, while they are still fully responsible for quality. Assigning responsibility without authority is a significant predicament. There are growing indications that well-organized, well-managed groups of high quality physicians may be able to directly manage both types of risk-quality and financial. The best way to optimize responsibility and authority, and to control financial and quality risks, is to place such responsibility and authority within the same entity.

Data Quality Control of the French Permanent Broadband Network in the RESIF Framework

NASA Astrophysics Data System (ADS)

Grunberg, Marc; Lambotte, Sophie; Engels, Fabien; Dretzen, Remi; Hernandez, Alain

2014-05-01

In the framework of the RESIF (Réseau Sismologique et géodésique Français) project, a new information system is being setting up, allowing the improvement of the management and the distribution of high quality data from the different elements of RESIF and the associated networks. Within this information system, EOST (in Strasbourg) is in charge of collecting real-time permanent broadband seismic waveform, and performing Quality Control on these data. The real-time and validated data set are pushed to the French National Distribution Center (Isterre/Grenoble) in order to make them publicly available. Furthermore EOST hosts the BCSF-ReNaSS, in charge of the French metropolitan seismic bulletin. This allows to benefit from some high-end quality control based on the national and world-wide seismicity. Here we present first the real-time seismic data flow from the stations of the French National Broad Band Network to EOST, and then, the data Quality Control procedures that were recently installed, including some new developments. The data Quality Control consists in applying a variety of subprocesses to check the consistency of the whole system and process from the stations to the data center. This allows us to verify that instruments and data transmission are operating correctly. Moreover analysis of the ambient noise helps to characterize intrinsic seismic quality of the stations and to identify other kind of disturbances. The deployed Quality Control consist in a pipeline that starts with low-level procedures : check the real-time miniseed data file (file naming convention, data integrity), check for inconsistencies between waveform and meta-data (channel name, sample rate, etc.), compute waveform statistics (data availability, gap/overlap, mean, rms, time quality, spike). It is followed by some high-level procedures such as : power spectral density computation (PSD), STA/LTA computation to be correlated to the seismicity, phases picking and stations magnitudes discrepancies. The results of quality control is visualized through a web interface. This latter gathers data from different information systems to provide a global view on last events that could impact the data (like intervention on site or seismic events, etc.). This work is still an ongoing project. We intend to add more sophisticated procedures to enhanced our data Quality Control. Among them, we will deploy a seismic moment tensor inversion tool for amplitude, time and polarity control and a noise correlation procedure for time drift detections.

Introducing Quality Control in the Chemistry Teaching Laboratory Using Control Charts

ERIC Educational Resources Information Center

Schazmann, Benjamin; Regan, Fiona; Ross, Mary; Diamond, Dermot; Paull, Brett

2009-01-01

Quality control (QC) measures are less prevalent in teaching laboratories than commercial settings possibly owing to a lack of commercial incentives or teaching resources. This article focuses on the use of QC assessment in the analytical techniques of high performance liquid chromatography (HPLC) and ultraviolet-visible spectroscopy (UV-vis) at…

10 CFR 60.150 - Scope.

Code of Federal Regulations, 2010 CFR

2010-01-01

... components will perform satisfactorily in service. Quality assurance includes quality control, which... COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Quality Assurance § 60.150 Scope. As used in this part, quality assurance comprises all those planned and systematic...

Treating child and adolescent anxiety effectively: Overview of systematic reviews.

PubMed

Bennett, Kathryn; Manassis, Katharina; Duda, Stephanie; Bagnell, Alexa; Bernstein, Gail A; Garland, E Jane; Miller, Lynn D; Newton, Amanda; Thabane, Lehana; Wilansky, Pamela

2016-12-01

We conducted an overview of systematic reviews about child and adolescent anxiety treatment options (psychosocial; medication; combination; web/computer-based treatment) to support evidence informed decision-making. Three questions were addressed: (i) Is the treatment more effective than passive controls? (ii) Is there evidence that the treatment is superior to or non-inferior to (i.e., as good as) active controls? (iii) What is the quality of evidence for the treatment? Pre-specified inclusion criteria identified high quality systematic reviews (2000-2015) reporting treatment effects on anxiety diagnosis and symptom severity. Evidence quality (EQ) was rated using Oxford evidence levels [EQ1 (highest); EQ5 (lowest)]. Twenty-two of 39 eligible reviews were high quality (AMSTAR score≥3/5). CBT (individual or group, with or without parents) was more effective than passive controls (EQ1). CBT effects compared to active controls were mixed (EQ1). SSRI/SNRI were more effective than placebo (EQ1) but comparative effectiveness remains uncertain. EQ for combination therapy could not be determined. RCTs of web/computer-based interventions showed mixed results (EQ1). CBM/ABM was not more efficacious than active controls (EQ1). No other interventions could be rated. High quality RCTs support treatment with CBT and medication. Findings for combination and web/computer-based treatment are encouraging but further RCTs are required. Head-to-head comparisons of active treatment options are needed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Enhancement of the Automated Quality Control Procedures for the International Soil Moisture Network

NASA Astrophysics Data System (ADS)

Heer, Elsa; Xaver, Angelika; Dorigo, Wouter; Messner, Romina

2017-04-01

In-situ soil moisture observations are still trusted to be the most reliable data to validate remotely sensed soil moisture products. Thus, the quality of in-situ soil moisture observations is of high importance. The International Soil Moisture Network (ISMN; http://ismn.geo.tuwien.ac.at/) provides in-situ soil moisture data from all around the world. The data is collected from individual networks and data providers, measured by different sensors in various depths. The data sets which are delivered in different units, time zones and data formats are then transformed into homogeneous data sets. An erroneous behavior of soil moisture data is very difficult to detect, due to annual and daily changes and most significantly the high influence of precipitation and snow melting processes. Only few of the network providers have a quality assessment for their data sets. Therefore, advanced quality control procedures have been developed for the ISMN (Dorigo et al. 2013). Three categories of quality checks were introduced: exceeding boundary values, geophysical consistency checks and a spectrum based approach. The spectrum based quality control algorithms aim to detect erroneous measurements which occur within plausible geophysical ranges, e.g. a sudden drop in soil moisture caused by a sensor malfunction. By defining several conditions which have to be met by the original soil moisture time series and their first and second derivative, such error types can be detected. Since the development of these sophisticated methods many more data providers shared their data with the ISMN and new types of erroneous measurements were identified. Thus, an enhancement of the automated quality control procedures became necessary. In the present work, we introduce enhancements of the existing quality control algorithms. Additionally, six completely new quality checks have been developed, e.g. detection of suspicious values before or after NAN-values, constant values and values that lie in a spectrum where a high majority of values before and after is flagged and therefore a sensor malfunction is certain. For the evaluation of the enhanced automated quality control system many test data sets were chosen, and manually validated to be compared to the existing quality control procedures and the new algorithms. Improvements will be shown that assure an appropriate assessment of the ISMN data sets, which are used for validations of soil moisture data retrieved by satellite data and are the foundation many other scientific publications.

Quality-assurance data for routine water analyses by the U.S. Geological Survey laboratory in Troy, New York - July 2003 through June 2005

USGS Publications Warehouse

Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

2009-01-01

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2003 through June 2005. Results for the quality-control samples for 20 analytical procedures were evaluated for bias and precision. Control charts indicate that data for five of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, pH, silicon, and sodium. Seven of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: dissolved organic carbon, chloride, nitrate (ion chromatograph), nitrite, silicon, sodium, and sulfate. The calcium and magnesium procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 17 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 22 analytes. At least 85 percent of the samples met data-quality objectives for all analytes except total monomeric aluminum (82 percent of samples met objectives), total aluminum (77 percent of samples met objectives), chloride (80 percent of samples met objectives), fluoride (76 percent of samples met objectives), and nitrate (ion chromatograph) (79 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with ratings for each sample in the satisfactory, good, and excellent ranges or less than 10 percent error. The P-sample (low-ionic-strength constituents) analysis had one marginal and two unsatisfactory ratings for the chloride procedure. The T-sample (trace constituents)analysis had two unsatisfactory ratings and one high range percent error for the aluminum procedure. The N-sample (nutrient constituents) analysis had one marginal rating for the nitrate procedure. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 84 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were ammonium, total aluminum, and acid-neutralizing capacity. The ammonium procedure did not meet data quality objectives in all studies. Data-quality objectives were not met in 23 percent of samples analyzed for total aluminum and 45 percent of samples analyzed acid-neutralizing capacity. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, sodium, and sulfate. Data-quality objectives were not met by samples analyzed for fluoride. 

Examining asthma quality of care using a population-based approach

PubMed Central

Klomp, Helena; Lawson, Joshua A.; Cockcroft, Donald W.; Chan, Benjamin T.; Cascagnette, Paul; Gander, Laurie; Jorgenson, Derek

2008-01-01

Background Asthma accounts for considerable burden on health care, but in most cases, asthma can be controlled. Quality-of-care indicators would aid in monitoring asthma management. We describe the quality of asthma care using a set of proposed quality indicators. Methods We performed a retrospective cross-sectional study using health databases in Saskatchewan, a Canadian province with a population of about 1 million people. We assessed 6 quality-of-care indicators among people with asthma: admission to hospital because of asthma; poor asthma control (high use of short-acting β-agonists, admission to hospital because of asthma or death due to asthma); no inhaled corticosteroid use among patients with poor control; at least moderate inhaled corticosteroid use among patients with poor control; high inhaled corticosteroid use and use of another preventer medication among patients with poor control; and any main preventer use among patients with poor control. We calculated crude and adjusted rates with 95% confidence intervals. We tested for differences using the χ2 test for proportions and generalized linear modelling techniques. Results In 2002/03, there were 24 616 people aged 5–54 years with asthma in Saskatchewan, representing a prevalence of 3.8%. Poor symptom control was observed in 18% of patients with asthma. Among those with poor control, 37% were not dispensed any inhaled corticosteroids, and 40% received potentially inadequate doses. Among those with poor control who were dispensed high doses of inhaled corticosteroids, 26% also used another preventer medication. Hospital admissions because of asthma were highest among those aged 6–9 years and females aged 20–44 years. Males and those in adult age groups (predominantly 20–44 years) had worse quality of care for 4 indicators examined. Interpretation Suboptimal asthma management would be improved through increased use of inhaled corticosteroids and preventer medications, and reduced reliance on short-acting β-agonist medications as recommended by consensus guidelines. PMID:18390944

[Quality process control system of Chinese medicine preparation based on "holistic view"].

PubMed

Wang, Ya-Qi; Jiao, Jiao-Jiao; Wu, Zhen-Feng; Zheng, Qin; Yang, Ming

2018-01-01

"High quality, safety and effectiveness" are the primary principles for the pharmaceutical research and development process in China. The quality of products relies not only on the inspection method, but also on the design and development, process control and standardized management. The quality depends on the process control level. In this paper, the history and current development of quality control of traditional Chinese medicine (TCM) preparations are reviewed systematically. Based on the development model of international drug quality control and the misunderstanding of quality control of TCM preparations, the reasons for impacting the homogeneity of TCM preparations are analyzed and summarized. According to TCM characteristics, efforts were made to control the diversity of TCM, make "unstable" TCM into "stable" Chinese patent medicines, put forward the concepts of "holistic view" and "QbD (quality by design)", so as to create the "holistic, modular, data, standardized" model as the core of TCM preparation quality process control model. Scientific studies shall conform to the actual production of TCM preparations, and be conducive to supporting advanced equipment and technology upgrade, thoroughly applying the scientific research achievements in Chinese patent medicines, and promoting the cluster application and transformation application of TCM pharmaceutical technology, so as to improve the quality and effectiveness of the TCM industry and realize the green development. Copyright© by the Chinese Pharmaceutical Association.

An Improved Power Quality BIBRED Converter-Based VSI-Fed BLDC Motor Drive

NASA Astrophysics Data System (ADS)

Singh, Bhim; Bist, Vashist

2014-01-01

This paper presents an IHQRR (integrated high-quality rectifier regulator) BIBRED (boost integrated buck rectifier energy storage DC-DC) converter-based VSI (voltage source inverter)-fed BLDC (brushless DC) motor drive. The speed control of BLDC motor is achieved by controlling the DC link voltage of the VSI using a single voltage sensor. This allows VSI to operate in fundamental frequency switching mode for electronic commutation of BLDC motor which reduces the switching losses due to high-frequency switching used in conventional approach of PWM (pulse width modulation)-based VSI-fed BLDC motor drive. A BIBRED converter is operated in a dual-DCM (discontinuous conduction mode) thus using a voltage follower approach for PFC (power factor correction) and DC link voltage control. The performance of the proposed drive is evaluated for improved power quality over a wide range of speed control and supply voltage variation for demonstrating the behavior of proposed drive. The power quality indices thus obtained are within the recommended limits by international PQ (power quality) standards such as IEC 61000-3-2.

Effects on employees of controlling working hours and working schedules.

PubMed

Kubo, T; Takahashi, M; Togo, F; Liu, X; Shimazu, A; Tanaka, K; Takaya, M

2013-03-01

High levels of control over working time and low variability in working hours have been associated with improved health-related outcomes. The potential mechanisms for this association remain unclear. To examine how work-time control and variability of working times are associated with fatigue recovery, sleep quality, work-life balance, and 'near misses' at work. Manufacturing sector employees completed a questionnaire that assessed work-time control, work-time variability, fatigue recovery, sleep quality, work-life balance and the frequency of near misses in the past 6 months. Mixed model analysis of covariance and multiple logistic regression analysis tested the main effects of work-time control and variability and their interaction, while adjusting for age, sex, work schedules, and overtime work in the past month. Subscales of work-time control were also investigated (control over daily working hours and over days off). One thousand three hundred and seventy-two completed questionnaires were returned, a response rate of 69%. A significantly higher quality of sleep and better work-life balance were found in the 'high control with low variability' reference group than in the other groups. Significantly better recovery of fatigue was also observed in the group having control over days off with low variability. While near misses were more frequent in the group with high control over daily working hours coupled with high variability compared with the reference group this was not significant. High work-time control and low variability were associated with favourable outcomes of health and work-life balance. This combined effect was not observed for the safety outcome addressed here.

Data Quality Control of the French Permanent Broadband Network in the RESIF Framework.

NASA Astrophysics Data System (ADS)

Grunberg, M.; Lambotte, S.; Engels, F.

2014-12-01

In the framework of the RESIF (Réseau Sismologique et géodésique Français) project, a new information system is setting up, allowing the improvement of the management and the distribution of high quality data from the different elements of RESIF. Within this information system, EOST (in Strasbourg) is in charge of collecting real-time permanent broadband seismic waveform, and performing Quality Control on these data. The real-time and validated data set are pushed to the French National Distribution Center (Isterre/Grenoble) to make them publicly available. Furthermore EOST hosts the BCSF-ReNaSS, in charge of the French metropolitan seismic bulletin. This allows to benefit from some high-end quality control based on the national and world-wide seismicity. Here we present the real-time seismic data flow from the stations of the French National Broad Band Network to EOST, and then, the data Quality Control procedures that were recently installed, including some new developments.The data Quality Control consists in applying a variety of processes to check the consistency of the whole system from the stations to the data center. This allows us to verify that instruments and data transmission are operating correctly. Moreover, time quality is critical for most of the scientific data applications. To face this challenge and check the consistency of polarities and amplitudes, we deployed several high-end processes including a noise correlation procedure to check for timing accuracy (intrumental time errors result in a time-shift of the whole cross-correlation, clearly distinct from those due to change in medium physical properties), and a systematic comparison of synthetic and real data for teleseismic earthquakes of magnitude larger than 6.5 to detect timing errors as well as polarity and amplitude problems.

A novel approach to rapidly explore analytical markers for quality control of Radix Salviae Miltiorrhizae extract granules by robust principal component analysis with ultra-high performance liquid chromatography-ultraviolet-quadrupole time-of-flight mass spectrometry.

PubMed

Song, Jing-Zheng; Li, Song-Lin; Zhou, Yan; Qiao, Chun-Feng; Chen, Shi-Lin; Xu, Hong-Xi

2010-11-02

In a well-controlled experiment, outliers discriminated by robust principal component analysis (RPCA) represent contents in samples which are of particular quality distinguishable from the rest of the others, therefore chemical constituents in a natural product causing discrimination between outliers and the majority of samples could be considered as analytical markers for quality control. Based on this strategy, a novel approach for rapidly exploring characteristic analytical markers was proposed for the quality control of extract granules of Radix Salviae Miltiorrhizae (EGRSM). In this study, large sizes of samples were analyzed via high-throughput ultra-high performance liquid chromatography-ultraviolet-quadrupole time-of-flight mass spectrometry (UHPLC-UV-Q-Tof MS). RPCA was first performed on the three groups of samples: RSM (the raw material), the in-house prepared aqueous extract of Radix Salviae Miltiorrhizae (AERSM) and commercial product of EGRSM, to determine the variation of specific constituents between raw material and the final products as well as the effect of manufacturing process on the overall quality. Then RPCA was performed on the commercial products of EGRSM to explore the applicability of identified characteristic markers for the quality control of EGRSM. Candidate markers were extracted by RPCA, and their molecular formulae were determined by high resolution electrospray ionization-mass spectrometric (ESI-MS) analysis. The suitability of identified markers was then evaluated by determining the relationship between quantities of the identified markers with their antioxidant activities biologically, and further confirmed in a variety of samples. In conclusion, the combination of RPCA with UHPLC-UV-Q-Tof MS is a reliable means to identify chemical markers for evaluating quality of herbal medicines. Copyright (c) 2010 Elsevier B.V. All rights reserved.

The Influence of Parental Control and Parent-Child Relational Qualities on Adolescent Internet Addiction: A 3-Year Longitudinal Study in Hong Kong

PubMed Central

Shek, Daniel T. L.; Zhu, Xiaoqin; Ma, Cecilia M. S.

2018-01-01

This study investigated how parental behavioral control, parental psychological control, and parent-child relational qualities predicted the initial level and rate of change in adolescent internet addiction (IA) across the junior high school years. The study also investigated the concurrent and longitudinal effects of different parenting factors on adolescent IA. Starting from the 2009/2010 academic year, 3,328 Grade 7 students (Mage = 12.59 ± 0.74 years) from 28 randomly selected secondary schools in Hong Kong responded on a yearly basis to a questionnaire measuring multiple constructs including socio-demographic characteristics, perceived parenting characteristics, and IA. Individual growth curve (IGC) analyses showed that adolescent IA slightly decreased during junior high school years. While behavioral control of both parents was negatively related to the initial level of adolescent IA, only paternal behavioral control showed a significant positive relationship with the rate of linear change in IA, suggesting that higher paternal behavioral control predicted a slower decrease in IA. In addition, fathers' and mothers' psychological control was positively associated with the initial level of adolescent IA, but increase in maternal psychological control predicted a faster drop in IA. Finally, parent-child relational qualities negatively and positively predicted the initial level and the rate of change in IA, respectively. When all parenting factors were considered simultaneously, multiple regression analyses revealed that paternal behavioral control and psychological control as well as maternal psychological control and mother-child relational quality were significant concurrent predictors of adolescent IA at Wave 2 and Wave 3. Regarding the longitudinal predicting effects, paternal psychological control and mother-child relational quality at Wave 1 were the two most robust predictors of later adolescent IA at Wave 2 and Wave 3. The above findings underscore the importance of the parent-child subsystem qualities in influencing adolescent IA in the junior high school years. In particular, these findings shed light on the different impacts of fathering and mothering which are neglected in the scientific literature. While the findings based on the levels of IA are consistent with the existing theoretical models, findings on the rate of change are novel. PMID:29765349

The Influence of Parental Control and Parent-Child Relational Qualities on Adolescent Internet Addiction: A 3-Year Longitudinal Study in Hong Kong.

PubMed

Shek, Daniel T L; Zhu, Xiaoqin; Ma, Cecilia M S

2018-01-01

This study investigated how parental behavioral control, parental psychological control, and parent-child relational qualities predicted the initial level and rate of change in adolescent internet addiction (IA) across the junior high school years. The study also investigated the concurrent and longitudinal effects of different parenting factors on adolescent IA. Starting from the 2009/2010 academic year, 3,328 Grade 7 students ( M age = 12.59 ± 0.74 years) from 28 randomly selected secondary schools in Hong Kong responded on a yearly basis to a questionnaire measuring multiple constructs including socio-demographic characteristics, perceived parenting characteristics, and IA. Individual growth curve (IGC) analyses showed that adolescent IA slightly decreased during junior high school years. While behavioral control of both parents was negatively related to the initial level of adolescent IA, only paternal behavioral control showed a significant positive relationship with the rate of linear change in IA, suggesting that higher paternal behavioral control predicted a slower decrease in IA. In addition, fathers' and mothers' psychological control was positively associated with the initial level of adolescent IA, but increase in maternal psychological control predicted a faster drop in IA. Finally, parent-child relational qualities negatively and positively predicted the initial level and the rate of change in IA, respectively. When all parenting factors were considered simultaneously, multiple regression analyses revealed that paternal behavioral control and psychological control as well as maternal psychological control and mother-child relational quality were significant concurrent predictors of adolescent IA at Wave 2 and Wave 3. Regarding the longitudinal predicting effects, paternal psychological control and mother-child relational quality at Wave 1 were the two most robust predictors of later adolescent IA at Wave 2 and Wave 3. The above findings underscore the importance of the parent-child subsystem qualities in influencing adolescent IA in the junior high school years. In particular, these findings shed light on the different impacts of fathering and mothering which are neglected in the scientific literature. While the findings based on the levels of IA are consistent with the existing theoretical models, findings on the rate of change are novel.

Published methodological quality of randomized controlled trials does not reflect the actual quality assessed in protocols

PubMed Central

Mhaskar, Rahul; Djulbegovic, Benjamin; Magazin, Anja; Soares, Heloisa P.; Kumar, Ambuj

2011-01-01

Objectives To assess whether reported methodological quality of randomized controlled trials (RCTs) reflect the actual methodological quality, and to evaluate the association of effect size (ES) and sample size with methodological quality. Study design Systematic review Setting Retrospective analysis of all consecutive phase III RCTs published by 8 National Cancer Institute Cooperative Groups until year 2006. Data were extracted from protocols (actual quality) and publications (reported quality) for each study. Results 429 RCTs met the inclusion criteria. Overall reporting of methodological quality was poor and did not reflect the actual high methodological quality of RCTs. The results showed no association between sample size and actual methodological quality of a trial. Poor reporting of allocation concealment and blinding exaggerated the ES by 6% (ratio of hazard ratio [RHR]: 0.94, 95%CI: 0.88, 0.99) and 24% (RHR: 1.24, 95%CI: 1.05, 1.43), respectively. However, actual quality assessment showed no association between ES and methodological quality. Conclusion The largest study to-date shows poor quality of reporting does not reflect the actual high methodological quality. Assessment of the impact of quality on the ES based on reported quality can produce misleading results. PMID:22424985

Development and flight test results of an autothrottle control system at Mach 3 cruise

NASA Technical Reports Server (NTRS)

Gilyard, G. B.; Burken, J. J.

1980-01-01

Flight test results obtained with the original Mach hold autopilot designed the YF-12C airplane which uses elevator control and a newly developed Mach hold system having an autothrottle integrated with an altitude hold autopilot system are presented. The autothrottle tests demonstrate good speed control at high Mach numbers and high altitudes while simultaneously maintaining control over altitude and good ride qualities. The autothrottle system was designed to control either Mach number or knots equivalent airspeed (KEAS). Excellent control of Mach number or KEAS was obtained with the autothrottle system when combined with altitude hold. Ride qualities were significantly better than with the conventional Mach hold system.

LOVE CANAL MONITORING PROGRAM. GCA QA/QC (QUALITY ASSURANCE/QUALITY CONTROL) SUMMARY REPORT

EPA Science Inventory

One of the most important responsibilities of the Love Canal prime contractor was the institution and maintenance of a quality assurance program. An important objective of the quality assurance program was to alert the subcontractors to the importance of high quality work on thei...

40 CFR 131.35 - Colville Confederated Tribes Indian Reservation.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-effective and reasonable best management practices for nonpoint source control. (iii) Where high quality... within areas designated as unique water quality management areas and waters otherwise of exceptional... PROGRAMS WATER QUALITY STANDARDS Federally Promulgated Water Quality Standards § 131.35 Colville...

To Build or Not to Build: Addressing Facilities Needs While Controlling Costs

ERIC Educational Resources Information Center

Kadamus, James A.

2015-01-01

When trustees, presidents, and senior college administrators meet, one topic dominates the conversation: how to keep education quality high and costs down. To keep quality high, college leaders need to have strong faculties and state-of-the-art facilities for teaching and research. Quality counts but it also costs, and that is where the pressures…

Handling qualities related to stall/spin accidents of supersonic fighter aircraft

NASA Technical Reports Server (NTRS)

Anderson, S. B.

1984-01-01

This paper reviews the handling qualities which influence the high angle of attack (AOA) behavior of supersonic fighter aircraft in order to obtain a clearer understanding of the causes of stall/spin accidents. The results show that, because modern fighters suffer more serious consequences when control is lost, good handling qualities are essential for safe operation at high AOA. Relaxed static stability used on some fighter aircraft can result in control problems at high AOA owing to inertia coupling and the difficulty of a recovery from a deep stall. Indications are that the use of departure/spin resistance and an automatic spin prevention system will greatly improve the safety record for modern supersonic fighters.

Adopting Quality Assurance Technology in Customer-Vendor Relationships: A Case Study of How Interorganizational Relationships Influence the Process

NASA Astrophysics Data System (ADS)

Heeager, Lise Tordrup; Tjørnehøj, Gitte

Quality assurance technology is a formal control mechanism aiming at increasing the quality of the product exchanged between vendors and customers. Studies of the adoption of this technology in the field of system development rarely focus on the role of the relationship between the customer and vendor in the process. We have studied how the process of adopting quality assurance technology by a small Danish IT vendor developing pharmacy software for a customer in the public sector was influenced by the relationship with the customer. The case study showed that the adoption process was shaped to a high degree by the relationship and vice versa. The prior high level of trust and mutual knowledge helped the parties negotiate mutually feasible solutions throughout the adoption process. We thus advise enhancing trust-building processes to strengthen the relationships and to balance formal control and social control to increase the likelihood of a successful outcome of the adoption of quality assurance technology in a customer-vendor relationship.

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York--July 1999 through June 2001

USGS Publications Warehouse

Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

2006-01-01

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's LabMaster data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality-control samples analyzed from July 1999 through June 2001. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, calcium, chloride and nitrate (ion chromatography and colormetric method) and sulfate. The total aluminum and dissolved organic carbon procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits. The calcium and specific conductance procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The magnesium procedure was biased for the high-concentration and low concentration samples, but was within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 14 of 15 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 17 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except ammonium (81 percent of samples met objectives), chloride (75 percent of samples met objectives), and sodium (86 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality over the time period, with most ratings for each sample in the good to excellent range. The P-sample (low-ionic-strength constituents) analysis had one satisfactory rating for the specific conductance procedure in one study. The T-sample (trace constituents) analysis had one satisfactory rating for the aluminum procedure in one study and one unsatisfactory rating for the sodium procedure in another. The remainder of the samples had good or excellent ratings for each study. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 89 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were ammonium, total aluminum, dissolved organic carbon, and sodium. Results indicate a positive bias for the ammonium procedure in all studies. Data-quality objectives were not met in 50 percent of samples analyzed for total aluminum, 38 percent of samples analyzed for dissolved organic carbon, and 27 percent of samples analyzed for sodium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 91 percent of the samples analyzed for calcium, chloride, fluoride, magnesium, pH, potassium, and sulfate. Data-quality objectives were met by 75 percent of the samples analyzed for sodium and 58 percent of the samples analyzed for specific conductance.

Manual therapy for tension-type headache related to quality of work life and work presenteeism: Secondary analysis of a randomized controlled trial.

PubMed

Monzani, Lucas; Espí-López, Gemma Victoria; Zurriaga, Rosario; Andersen, Lars L

2016-04-01

The objective of this research is to evaluate the efficacy of manual therapy for tension-type headache (TTH) in restoring workers quality of work life, and how work presenteeism affects this relation. This study is a secondary analysis of a factorial, randomized clinical trial on manual therapy interventions. Altogether, 80 patients (85% women) with TTH and without current symptoms of any other concomitant disease participated. An experienced therapist delivered the treatment: myofascial inhibitory technique (IT), articulatory technique (AT), combined technique (IT and AT), and control group (no treatment). In general, all treatments as compared to our control group had a large effect (f≥.69) in the improvement of participants' quality of work life. Work presenteeism interacted with TTH treatment type's efficacy on participant's quality of work life. The inhibitory technique lead to higher reports of quality of work life than other treatment options only for participants with very low frequency of work presenteeism. In turn, TTH articulatory treatment techniques resulted in higher reports of quality of work life for a high to very high work presenteeism frequency. Articulatory manipulation technique is the more efficient treatment to improve quality of work life when the frequency of work presenteeism is high. Implications for future research and practice are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Total Quality Management: A Recipe for Success

DTIC Science & Technology

1990-04-02

Total Quality Management (TQM) is a high level Department of Defense (DOD) initiative that is being touted as the primary management tool to force...to create a DOD wide organizational climate that will stimulate and perpetuate individual productivity enhancing contributions. Keywords: Quality control; Quality management ; TQM.

High-performance thin layer chromatography to assess pharmaceutical product quality.

PubMed

Kaale, Eliangiringa; Manyanga, Vicky; Makori, Narsis; Jenkins, David; Michael Hope, Samuel; Layloff, Thomas

2014-06-01

To assess the sustainability, robustness and economic advantages of high-performance thin layer chromatography (HPTLC) for quality control of pharmaceutical products. We compared three laboratories where three lots of cotrimoxazole tablets were assessed using different techniques for quantifying the active ingredient. The average assay relative standard deviation for the three lots was 1.2 with a range of 0.65-2.0. High-performance thin layer chromatography assessments are yielding valid results suitable for assessing product quality. The local pharmaceutical manufacturer had evolved the capacity to produce very high quality products. © 2014 John Wiley & Sons Ltd.

The effects of Sahaja Yoga meditation on mental health: a systematic review.

PubMed

Hendriks, Tom

2018-05-30

Objectives To determine the efficacy of Sahaja Yoga (SY) meditation on mental health among clinical and healthy populations. Methods All publications on SY were eligible. Databases were searched up to November 2017, namely PubMed, MEDLINE (NLM), PsychINFO, and Scopus. An internet search (Google Scholar) was also conducted. The quality of the randomized controlled trails was assessed using the Cochrane Risk Assessment for Bias. The quality of cross-sectional studies, a non-randomized controlled trial and a cohort study was assessed with the Newcastle-Ottawa Quality Assessment Scale. Results We included a total of eleven studies; four randomized controlled trials, one non-randomized controlled trial, five cross-sectional studies, and one prospective cohort study. The studies included a total of 910 participants. Significant findings were reported in relation to the following outcomes: anxiety, depression, stress, subjective well-being, and psychological well-being. Two randomized studies were rated as high quality studies, two randomized studies as low quality studies. The quality of the non-randomized trial, the cross-sectional studies and the cohort study was high. Effect sizes could not be calculated in five studies due to unclear or incomplete reporting. Conclusions After reviewing the articles and taking the quality of the studies into account, it appears that SY may reduce depression and possibly anxiety. In addition, the practice of SY is also associated with increased subjective wellbeing and psychological well-beng. However, due to the limited number of publications, definite conclusions on the effects of SY cannot be made and more high quality randomized studies are needed to justify any firm conclusions on the beneficial effects of SY on mental health.

MO-A-16A-01: QA Procedures and Metrics: In Search of QA Usability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sathiaseelan, V; Thomadsen, B

Radiation therapy has undergone considerable changes in the past two decades with a surge of new technology and treatment delivery methods. The complexity of radiation therapy treatments has increased and there has been increased awareness and publicity about the associated risks. In response, there has been proliferation of guidelines for medical physicists to adopt to ensure that treatments are delivered safely. Task Group recommendations are copious, and clinical physicists' hours are longer, stretched to various degrees between site planning and management, IT support, physics QA, and treatment planning responsibilities.Radiation oncology has many quality control practices in place to ensure themore » delivery of high-quality, safe treatments. Incident reporting systems have been developed to collect statistics about near miss events at many radiation oncology centers. However, tools are lacking to assess the impact of these various control measures. A recent effort to address this shortcoming is the work of Ford et al (2012) who recently published a methodology enumerating quality control quantification for measuring the effectiveness of safety barriers. Over 4000 near-miss incidents reported from 2 academic radiation oncology clinics were analyzed using quality control quantification, and a profile of the most effective quality control measures (metrics) was identified.There is a critical need to identify a QA metric to help the busy clinical physicists to focus their limited time and resources most effectively in order to minimize or eliminate errors in the radiation treatment delivery processes. In this symposium the usefulness of workflows and QA metrics to assure safe and high quality patient care will be explored.Two presentations will be given:Quality Metrics and Risk Management with High Risk Radiation Oncology ProceduresStrategies and metrics for quality management in the TG-100 Era Learning Objectives: Provide an overview and the need for QA usability metrics: Different cultures/practices affecting the effectiveness of methods and metrics. Show examples of quality assurance workflows, Statistical process control, that monitor the treatment planning and delivery process to identify errors. To learn to identify and prioritize risks and QA procedures in radiation oncology. Try to answer the question: Can a quality assurance program aided by quality assurance metrics help minimize errors and ensure safe treatment delivery. Should such metrics be institution specific.« less

Helicopter mathematical models and control law development for handling qualities research

NASA Technical Reports Server (NTRS)

Chen, Robert T. N.; Lebacqz, J. Victor; Aiken, Edwin W.; Tischler, Mark B.

1988-01-01

Progress made in joint NASA/Army research concerning rotorcraft flight-dynamics modeling, design methodologies for rotorcraft flight-control laws, and rotorcraft parameter identification is reviewed. Research into these interactive disciplines is needed to develop the analytical tools necessary to conduct flying qualities investigations using both the ground-based and in-flight simulators, and to permit an efficient means of performing flight test evaluation of rotorcraft flying qualities for specification compliance. The need for the research is particularly acute for rotorcraft because of their mathematical complexity, high order dynamic characteristics, and demanding mission requirements. The research in rotorcraft flight-dynamics modeling is pursued along two general directions: generic nonlinear models and nonlinear models for specific rotorcraft. In addition, linear models are generated that extend their utilization from 1-g flight to high-g maneuvers and expand their frequency range of validity for the design analysis of high-gain flight control systems. A variety of methods ranging from classical frequency-domain approaches to modern time-domain control methodology that are used in the design of rotorcraft flight control laws is reviewed. Also reviewed is a study conducted to investigate the design details associated with high-gain, digital flight control systems for combat rotorcraft. Parameter identification techniques developed for rotorcraft applications are reviewed.

Modeling Study on Air Quality Improvement due to Mobile Source Emission control Plan in Seoul Metropolitan Area

NASA Astrophysics Data System (ADS)

Kim, Y. J.; Sunwoo, Y.; Hwang, I.; Song, S.; Sin, J.; Kim, D.

2015-12-01

A very high population and corresponding high number of vehicles in the Seoul Metropolitan Area (SMA) are aggravating the air quality of this region. The Korean government continues to make concerted efforts to improve air quality. One of the major policies that the Ministry of Environment of Korea enforced is "The Special Act for Improvement of Air Quality in SMA" and "The 1st Air Quality Management Plan of SMA". Mobile Source emission controls are an important part of the policy. Thus, it is timely to evaluate the air quality improvement due to the controls. Therefore, we performed a quantitative analysis of the difference in air quality using the Community Multiscale Air Quality (CMAQ) model and December, 2011 was set as the target period to capture the impact of the above control plans. We considered four fuel-type vehicle emission scenarios and compared the air quality improvement differences between them. The scenarios are as follows: no-control, gasoline vehicle control only, diesel vehicle control only, and control of both; utilizing the revised mobile source emissions from the Clean Air Policy Support System (CAPSS), which is the national emission inventory reflecting current policy.In order to improve the accuracy of the modeling data, we developed new temporal allocation coefficients based on traffic volume observation data and spatially reallocated the mobile source emissions using vehicle flow survey data. Furthermore, we calculated the PM10 and PM2.5 emissions of gasoline vehicles which is omitted in CAPSS.The results of the air quality modeling shows that vehicle control plans for both gasoline and diesel lead to a decrease of 0.65ppb~8.75ppb and 0.02㎍/㎥~7.09㎍/㎥ in NO2 and PM10 monthly average concentrations, respectively. The large percentage decreases mainly appear near the center of the metropolis. However, the largest NO2 decrease percentages are found in the northeast region of Gyeonggi-do, which is the province that surrounds the capital of Seoul. Comparing the results between the different scenarios, diesel vehicle control impact dominates relative to the impact of gasoline control. The diesel-only reduction plan shows that NO2 and PM10 improved by 2.93ppb and 3.32㎍/㎥, respectively.

38 CFR 36.4348 - Servicer Appraisal Processing Program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

38 CFR 36.4348 - Servicer Appraisal Processing Program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

38 CFR 36.4348 - Servicer Appraisal Processing Program.

Code of Federal Regulations, 2013 CFR

2013-07-01

... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

38 CFR 36.4348 - Servicer Appraisal Processing Program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... requirement, routine reviews of SAPP cases will be made by VA staff based upon quality control procedures..., that its activities do not deviate from high standards of integrity. The quality control system must include frequent, periodic audits that specifically address the appraisal review activity. These audits...

Determinants of Quality of Interview and Impact on Risk Estimates in a Case-Control Study of Bladder Cancer

PubMed Central

Silverman, Debra T.; Malats, Núria; Tardon, Adonina; Garcia-Closas, Reina; Serra, Consol; Carrato, Alfredo; Fortuny, Joan; Rothman, Nathaniel; Dosemeci, Mustafa; Kogevinas, Manolis

2009-01-01

The authors evaluated potential determinants of the quality of the interview in a case-control study of bladder cancer and assessed the effect of the interview quality on the risk estimates. The analysis included 1,219 incident bladder cancer cases and 1,271 controls recruited in Spain in 1998–2001. Information on etiologic factors for bladder cancer was collected through personal interviews, which were scored as unsatisfactory, questionable, reliable, or high quality by the interviewers. Eight percent of the interviews were unsatisfactory or questionable. Increasing age, lower socioeconomic status, and poorer self-perceived health led to higher proportions of questionable or unreliable interviews. The odds ratio for cigarette smoking, the main risk factor for bladder cancer, was 6.18 (95% confidence interval: 4.56, 8.39) overall, 3.20 (95% confidence interval: 1.13, 9.04) among unsatisfactory or questionable interviews, 6.86 (95% confidence interval: 4.80, 9.82) among reliable interviews, and 7.70 (95% confidence interval: 3.64, 16.30) among high-quality interviews. Similar trends were observed for employment in high-risk occupations, drinking water containing elevated levels of trihalomethanes, and use of analgesics. Higher quality interviews led to stronger associations compared with risk estimation that did not take the quality of interview into account. The collection of quality of interview scores and the exclusion of unreliable interviews probably reduce misclassification of exposure in observational studies. PMID:19478234

Linked Analysis of East Asia Emission Reduction Pathways

NASA Astrophysics Data System (ADS)

Kim, Y.; Woo, J. H.; Bu, C.; Lee, Y.; Kim, J.; Jang, Y.; Park, M.

2017-12-01

Air pollution and its impacts over the Northeast Asia are very severe because of the massive pollutant emissions and high population. Korea has been trying to improve air quality with the enhanced environmental legislation. The air quality over Korea, however, does not entirely dependent on its local emissions. Transboundary air pollution from China highly affects Korean atmosphere. The purpose of this research is to understand role of local and transbounday efforts to improve air quality changes over Korea. In this research, we have tried to set up the multiple emission scenario pathways for Korea and China using IIASA's GAINS (Greenhouse gas - Air pollution Interactions aNd Synergies) modeling framework. More up-to-date growth factors and control policy packets were made using regional socio-economic data and control policy information from local governments and international statistics. Four major scenario pathways, 1) Base (Baseline: current legislation), 2) OTB/OTB(On the book/On the way : existing control measure/planed control measure), 3) BOTW_GHG(Beyond on the way : OTW with GHG reduction plan), 4) BOTW_NH3 (OTW with additional NH3 reduction measure) were developed to represent air quality improvement pathways in consideration of both Korean and Chinese efforts. Strict ambient PM2.5 standards from Seoul metropolitan Air quality Improvement Plan(SAIP) seems too enthusiastic without linking air quality control efforts of China. Step-by-step emission controls and following air quality, control cost, health impact from each scenario will be presented at the conference. This subject is supported by Korea Ministry of Environment as "Climate Change Correspondence Program". And This work was supported under the framework of national strategy project on fine particulate matters by Ministry of Science, ICT and Future Planning.

Flying qualities and control system characteristics for superaugmented aircraft

NASA Technical Reports Server (NTRS)

Myers, T. T.; Mcruer, D. T.; Johnston, D. E.

1984-01-01

Aircraft-alone dynamics and superaugmented control system fundamental regulatory properties including stability and regulatory responses of the basic closed-loop systems; fundamental high and low frequency margins and governing factors; and sensitivity to aircraft and controller parameters are addressed. Alternative FCS mechanizations, and mechanizational side effects are also discussed. An overview of flying qualities considerations encompasses general pilot operations as a controller in unattended, intermittent and trim, and full-attention regulatory or command control; effective vehicle primary and secondary response properties to pilot inputs and disturbances; pilot control architectural possibilities; and comparison of superaugmented and conventional aircraft path responses for different forms of pilot control. Results of a simple experimental investigation into pilot dynamic behavior in attitude control of superaugmented aircraft configurations with high frequency time laps and time delays are presented.

Screening bioactive quality control markers of QiShenYiQi dripping pills based on the relationship between the ultra-high performance liquid chromatography fingerprint and vascular protective activity.

PubMed

Zhuo, Limeng; Peng, Jingjing; Zhao, Yunli; Li, Dongxiang; Xie, Xiuman; Tong, Ling; Yu, Zhiguo

2017-10-01

Traditional Chinese medicine consists of complex phytochemical constituents. Selecting appropriate analytical markers of traditional Chinese medicine is a critical step in quality control. Currently, the combination of fingerprinting and efficacy evaluation is considered as a useful method for screening active ingredients in complex mixtures. This study was designed to develop an orthogonal partial least squares model for screening bioactive quality control markers of QishenYiqi dripping pills based on the fingerprint-efficacy relationship. First, the chemical fingerprints of 49 batches of QishenYiqi dripping pill samples were established by ultra-high performance liquid chromatography coupled with a photodiode array detector. Second, ultra-high performance liquid chromatography coupled with quadrupole-time-of-flight mass spectrometry was exploited to systematically investigate the 36 copossessing fingerprint components in QishenYiqi dripping pills. The vascular protective activity of QishenYiqi dripping pills was determined by using a cell counting kit-8 assay. Finally, fingerprint-efficacy relationship was established by orthogonal partial least squares model. The results indicated that ten components exhibited strong correlation with vascular protective activity, and these were preliminarily screened as quality control markers. The present study provided a novel idea for the study of the pharmacodynamic material basis and quality evaluation of QishenYiqi dripping pills. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bioengineering a Human Plasma-Based Epidermal Substitute With Efficient Grafting Capacity and High Content in Clonogenic Cells

PubMed Central

Alexaline, Maia M.; Trouillas, Marina; Nivet, Muriel; Bourreau, Emilie; Leclerc, Thomas; Duhamel, Patrick; Martin, Michele T.; Doucet, Christelle; Fortunel, Nicolas O.

2015-01-01

Cultured epithelial autografts (CEAs) produced from a small, healthy skin biopsy represent a lifesaving surgical technique in cases of full-thickness skin burn covering >50% of total body surface area. CEAs also present numerous drawbacks, among them the use of animal proteins and cells, the high fragility of keratinocyte sheets, and the immaturity of the dermal-epidermal junction, leading to heavy cosmetic and functional sequelae. To overcome these weaknesses, we developed a human plasma-based epidermal substitute (hPBES) for epidermal coverage in cases of massive burn, as an alternative to traditional CEA, and set up critical quality controls for preclinical and clinical studies. In this study, phenotypical analyses in conjunction with functional assays (clonal analysis, long-term culture, or in vivo graft) showed that our new substitute fulfills the biological requirements for epidermal regeneration. hPBES keratinocytes showed high potential for cell proliferation and subsequent differentiation similar to healthy skin compared with a well-known reference material, as ascertained by a combination of quality controls. This work highlights the importance of integrating relevant multiparameter quality controls into the bioengineering of new skin substitutes before they reach clinical development. Significance This work involves the development of a new bioengineered epidermal substitute with pertinent functional quality controls. The novelty of this work is based on this quality approach. PMID:25848122

Bioengineering a human plasma-based epidermal substitute with efficient grafting capacity and high content in clonogenic cells.

PubMed

Alexaline, Maia M; Trouillas, Marina; Nivet, Muriel; Bourreau, Emilie; Leclerc, Thomas; Duhamel, Patrick; Martin, Michele T; Doucet, Christelle; Fortunel, Nicolas O; Lataillade, Jean-Jacques

2015-06-01

Cultured epithelial autografts (CEAs) produced from a small, healthy skin biopsy represent a lifesaving surgical technique in cases of full-thickness skin burn covering >50% of total body surface area. CEAs also present numerous drawbacks, among them the use of animal proteins and cells, the high fragility of keratinocyte sheets, and the immaturity of the dermal-epidermal junction, leading to heavy cosmetic and functional sequelae. To overcome these weaknesses, we developed a human plasma-based epidermal substitute (hPBES) for epidermal coverage in cases of massive burn, as an alternative to traditional CEA, and set up critical quality controls for preclinical and clinical studies. In this study, phenotypical analyses in conjunction with functional assays (clonal analysis, long-term culture, or in vivo graft) showed that our new substitute fulfills the biological requirements for epidermal regeneration. hPBES keratinocytes showed high potential for cell proliferation and subsequent differentiation similar to healthy skin compared with a well-known reference material, as ascertained by a combination of quality controls. This work highlights the importance of integrating relevant multiparameter quality controls into the bioengineering of new skin substitutes before they reach clinical development. This work involves the development of a new bioengineered epidermal substitute with pertinent functional quality controls. The novelty of this work is based on this quality approach. ©AlphaMed Press.

Automated update, revision, and quality control of the maize genome annotations using MAKER-P improves the B73 RefGen_v3 gene models and identifies new genes

USDA-ARS?s Scientific Manuscript database

The large size and relative complexity of many plant genomes make creation, quality control, and dissemination of high-quality gene structure annotations challenging. In response, we have developed MAKER-P, a fast and easy-to-use genome annotation engine for plants. Here, we report the use of MAKER-...

[Quality by design approaches for pharmaceutical development and manufacturing of Chinese medicine].

PubMed

Xu, Bing; Shi, Xin-Yuan; Wu, Zhi-Sheng; Zhang, Yan-Ling; Wang, Yun; Qiao, Yan-Jiang

2017-03-01

The pharmaceutical quality was built by design, formed in the manufacturing process and improved during the product's lifecycle. Based on the comprehensive literature review of pharmaceutical quality by design (QbD), the essential ideas and implementation strategies of pharmaceutical QbD were interpreted. Considering the complex nature of Chinese medicine, the "4H" model was innovated and proposed for implementing QbD in pharmaceutical development and industrial manufacture of Chinese medicine product. "4H" corresponds to the acronym of holistic design, holistic information analysis, holistic quality control, and holistic process optimization, which is consistent with the holistic concept of Chinese medicine theory. The holistic design aims at constructing both the quality problem space from the patient requirement and the quality solution space from multidisciplinary knowledge. Holistic information analysis emphasizes understanding the quality pattern of Chinese medicine by integrating and mining multisource data and information at a relatively high level. The batch-to-batch quality consistence and manufacturing system reliability can be realized by comprehensive application of inspective quality control, statistical quality control, predictive quality control and intelligent quality control strategies. Holistic process optimization is to improve the product quality and process capability during the product lifecycle management. The implementation of QbD is useful to eliminate the ecosystem contradictions lying in the pharmaceutical development and manufacturing process of Chinese medicine product, and helps guarantee the cost effectiveness. Copyright© by the Chinese Pharmaceutical Association.

Chemical analysis of Panax quinquefolius (North American ginseng): A review.

PubMed

Wang, Yaping; Choi, Hyung-Kyoon; Brinckmann, Josef A; Jiang, Xue; Huang, Linfang

2015-12-24

Panax quinquefolius (PQ) is one of the best-selling natural health products due to its proposed beneficial anti-aging, anti-cancer, anti-stress, anti-fatigue, and anxiolytic effects. In recent years, the quality of PQ has received considerable attention. Sensitive and accurate methods for qualitative and quantitative analyses of chemical constituents are necessary for the comprehensive quality control to ensure the safety and efficacy of PQ. This article reviews recent progress in the chemical analysis of PQ and its preparations. Numerous analytical techniques, including spectroscopy, thin-layer chromatography (TLC), gas chromatography (GC), high-performance liquid chromatography (HPLC), liquid chromatography/mass spectrometry (LC/MS), high-speed centrifugal partition chromatography (HSCPC), high-performance counter-current chromatography (HPCCC), nuclear magnetic resonance spectroscopy (NMR), and immunoassay, are described. Among these techniques, HPLC coupled with mass spectrometry (MS) is the most promising method for quality control. The challenges encountered in the chemical analysis of PQ are also briefly discussed, and the remaining questions regarding the quality control of PQ that require further investigation are highlighted. Copyright © 2015 Elsevier B.V. All rights reserved.

Published methodological quality of randomized controlled trials does not reflect the actual quality assessed in protocols.

PubMed

Mhaskar, Rahul; Djulbegovic, Benjamin; Magazin, Anja; Soares, Heloisa P; Kumar, Ambuj

2012-06-01

To assess whether the reported methodological quality of randomized controlled trials (RCTs) reflects the actual methodological quality and to evaluate the association of effect size (ES) and sample size with methodological quality. Systematic review. This is a retrospective analysis of all consecutive phase III RCTs published by eight National Cancer Institute Cooperative Groups up to 2006. Data were extracted from protocols (actual quality) and publications (reported quality) for each study. Four hundred twenty-nine RCTs met the inclusion criteria. Overall reporting of methodological quality was poor and did not reflect the actual high methodological quality of RCTs. The results showed no association between sample size and actual methodological quality of a trial. Poor reporting of allocation concealment and blinding exaggerated the ES by 6% (ratio of hazard ratio [RHR]: 0.94; 95% confidence interval [CI]: 0.88, 0.99) and 24% (RHR: 1.24; 95% CI: 1.05, 1.43), respectively. However, actual quality assessment showed no association between ES and methodological quality. The largest study to date shows that poor quality of reporting does not reflect the actual high methodological quality. Assessment of the impact of quality on the ES based on reported quality can produce misleading results. Copyright © 2012 Elsevier Inc. All rights reserved.

Influence of quality control variables on failure of graphite/epoxy under extreme moisture conditions

NASA Technical Reports Server (NTRS)

Clements, L. L.; Lee, P. R.

1980-01-01

Tension tests on graphite/epoxy composites were performed to determine the influence of various quality control variables on failure strength as a function of moisture and moderate temperatures. The extremely high and low moisture contents investigated were found to have less effect upon properties than did temperature or the quality control variables of specimen flaws and prepreg batch to batch variations. In particular, specimen flaws were found to drastically reduce the predicted strength of the composite, whereas specimens from different batches of prepreg displayed differences in strength as a function of temperature and extreme moisture exposure. The findings illustrate the need for careful specimen preparation, studies of flaw sensitivity, and careful quality control in any study of composite materials.

HPLC for quality control of polyimides

NASA Technical Reports Server (NTRS)

Young, P. R.; Sykes, G. F.

1979-01-01

High Pressure Liquid Chromatography (HPLC) as a quality control tool for polyimide resins and prepregs are presented. A data base to help establish accept/reject criteria for these materials was developed. This work is intended to supplement, not replace, standard quality control tests normally conducted on incoming resins and prepregs. To help achieve these objectives, the HPLC separation of LARC-160 polyimide precursor resin was characterized. Room temperature resin aging effects were studied. Graphite reinforced composites made from fresh and aged resin were fabricated and tested to determine if changes observed by HPLC were significant.

Efforts To Solve Quality Problems. Background Paper No. 36.

ERIC Educational Resources Information Center

Smith, Michael J.; And Others

Producing goods and services of high quality is not expensive, but correcting poor quality costs U.S. companies as much as 20 percent of sales revenues annually. One survey reported that only 1 out of 300 U.S. companies involved management and engineering staff in quality training. The tendency is to have a quality control department, separate…

Internal quality control indicators of cervical cytopathology exams performed in laboratories monitored by the External Quality Control Laboratory.

PubMed

Ázara, Cinara Zago Silveira; Manrique, Edna Joana Cláudio; Tavares, Suelene Brito do Nascimento; de Souza, Nadja Lindany Alves; Amaral, Rita Goreti

2014-09-01

To evaluate the impact of continued education provided by an external quality control laboratory on the indicators of internal quality control of cytopathology exams. The internal quality assurance indicators for cytopathology exams from 12 laboratories monitored by the External Quality Control Laboratory were evaluated. Overall, 185,194 exams were included, 98,133 of which referred to the period preceding implementation of a continued education program, while 87,061 referred to the period following this intervention. Data were obtained from the Cervical Cancer Database of the Brazilian National Health Service. Following implementation of the continued education program, the positivity index (PI) remained within recommended limits in four laboratories. In another four laboratories, the PI progressed from below the limits to within the recommended standards. In one laboratory, the PI remained low, in two laboratories, it remained very low, and in one, it increased from very low to low. The percentage of exams compatible with a high-grade squamous intraepithelial lesion (HSIL) remained within the recommended limits in five laboratories, while in three laboratories it progressed from below the recommended levels to >0.4% of the total number of satisfactory exams, and in four laboratories it remained below the standard limit. Both the percentage of atypical squamous cells of undetermined significance (ASC-US) in relation to abnormal exams, and the ratio between ASC-US and intraepithelial lesions remained within recommended levels in all the laboratories investigated. An improvement was found in the indicators represented by the positivity index and the percentage of exams compatible with a high-grade squamous intraepithelial lesion, showing that the role played by the external quality control laboratory in providing continued education contributed towards improving laboratory staff skills in detecting cervical cancer precursor lesions.

Responses of Rapid Viscoanalyzer Profile and Other Rice Grain Qualities to Exogenously Applied Plant Growth Regulators under High Day and High Night Temperatures

PubMed Central

Fahad, Shah; Hussain, Saddam; Saud, Shah; Hassan, Shah; Chauhan, Bhagirath Singh; Khan, Fahad; Ihsan, Muhammad Zahid; Ullah, Abid; Wu, Chao; Bajwa, Ali Ahsan; Alharby, Hesham; Amanullah; Nasim, Wajid; Shahzad, Babar; Tanveer, Mohsin; Huang, Jianliang

2016-01-01

High-temperature stress degrades the grain quality of rice; nevertheless, the exogenous application of plant growth regulators (PGRs) might alleviate the negative effects of high temperatures. In the present study, we investigated the responses of rice grain quality to exogenously applied PGRs under high day temperatures (HDT) and high night temperatures (HNT) under controlled conditions. Four different combinations of ascorbic acid (Vc), alpha-tocopherol (Ve), brassinosteroids (Br), methyl jasmonates (MeJA) and triazoles (Tr) were exogenously applied to two rice cultivars (IR-64 and Huanghuazhan) prior to the high-temperature treatment. A Nothing applied Control (NAC) was included for comparison. The results demonstrated that high-temperature stress was detrimental for grain appearance and milling qualities and that both HDT and HNT reduced the grain length, grain width, grain area, head rice percentage and milled rice percentage but increased the chalkiness percentage and percent area of endosperm chalkiness in both cultivars compared with ambient temperature (AT). Significantly higher grain breakdown, set back, consistence viscosity and gelatinization temperature, and significantly lower peak, trough and final viscosities were observed under high-temperature stress compared with AT. Thus, HNT was more devastating for grain quality than HDT. The exogenous application of PGRs ameliorated the adverse effects of high temperature in both rice cultivars, and Vc+Ve+MejA+Br was the best combination for both cultivars under high temperature stress. PMID:27472200

Face Recognition for Access Control Systems Combining Image-Difference Features Based on a Probabilistic Model

NASA Astrophysics Data System (ADS)

Miwa, Shotaro; Kage, Hiroshi; Hirai, Takashi; Sumi, Kazuhiko

We propose a probabilistic face recognition algorithm for Access Control System(ACS)s. Comparing with existing ACSs using low cost IC-cards, face recognition has advantages in usability and security that it doesn't require people to hold cards over scanners and doesn't accept imposters with authorized cards. Therefore face recognition attracts more interests in security markets than IC-cards. But in security markets where low cost ACSs exist, price competition is important, and there is a limitation on the quality of available cameras and image control. Therefore ACSs using face recognition are required to handle much lower quality images, such as defocused and poor gain-controlled images than high security systems, such as immigration control. To tackle with such image quality problems we developed a face recognition algorithm based on a probabilistic model which combines a variety of image-difference features trained by Real AdaBoost with their prior probability distributions. It enables to evaluate and utilize only reliable features among trained ones during each authentication, and achieve high recognition performance rates. The field evaluation using a pseudo Access Control System installed in our office shows that the proposed system achieves a constant high recognition performance rate independent on face image qualities, that is about four times lower EER (Equal Error Rate) under a variety of image conditions than one without any prior probability distributions. On the other hand using image difference features without any prior probabilities are sensitive to image qualities. We also evaluated PCA, and it has worse, but constant performance rates because of its general optimization on overall data. Comparing with PCA, Real AdaBoost without any prior distribution performs twice better under good image conditions, but degrades to a performance as good as PCA under poor image conditions.

A New Dual-purpose Quality Control Dosimetry Protocol for Diagnostic Reference-level Determination in Computed Tomography.

PubMed

Sohrabi, Mehdi; Parsi, Masoumeh; Sina, Sedigheh

2018-05-17

A diagnostic reference level is an advisory dose level set by a regulatory authority in a country as an efficient criterion for protection of patients from unwanted medical exposure. In computed tomography, the direct dose measurement and data collection methods are commonly applied for determination of diagnostic reference levels. Recently, a new quality-control-based dose survey method was proposed by the authors to simplify the diagnostic reference-level determination using a retrospective quality control database usually available at a regulatory authority in a country. In line with such a development, a prospective dual-purpose quality control dosimetry protocol is proposed for determination of diagnostic reference levels in a country, which can be simply applied by quality control service providers. This new proposed method was applied to five computed tomography scanners in Shiraz, Iran, and diagnostic reference levels for head, abdomen/pelvis, sinus, chest, and lumbar spine examinations were determined. The results were compared to those obtained by the data collection and quality-control-based dose survey methods, carried out in parallel in this study, and were found to agree well within approximately 6%. This is highly acceptable for quality-control-based methods according to International Atomic Energy Agency tolerance levels (±20%).

Can exercise improve self esteem in children and young people? A systematic review of randomised controlled trials

PubMed Central

Ekeland, E; Heian, F; Hagen, K; Coren, E

2005-01-01

Twenty three randomised controlled trials were analysed. A synthesis of several small, low quality trials indicates that exercise may have short term beneficial effects on self esteem in children and adolescents. However, high quality research on defined populations with adequate follow up is needed. PMID:16244186

Comparative mass spectrometry & nuclear magnetic resonance metabolomic approaches for nutraceuticals quality control analysis: a brief review.

PubMed

Farag, Mohamed A

2014-01-01

The number of botanical dietary supplements in the market has recently increased primarily due to increased health awareness. Standardization and quality control of the constituents of these plant extracts is an important topic, particularly when such ingredients are used long term as dietary supplements, or in cases where higher doses are marketed as drugs. The development of fast, comprehensive, and effective untargeted analytical methods for plant extracts is of high interest. Nuclear magnetic resonance spectroscopy and mass spectrometry are the most informative tools, each of which enables high-throughput and global analysis of hundreds of metabolites in a single step. Although only one of the two techniques is utilized in the majority of plant metabolomics applications, there is a growing interest in combining the data from both platforms to effectively unravel the complexity of plant samples. The application of combined MS and NMR in the quality control of nutraceuticals forms the major part of this review. Finally I will look at the future developments and perspectives of these two technologies for the quality control of herbal materials.

Flight test experience with high-alpha control system techniques on the F-14 airplane

NASA Technical Reports Server (NTRS)

Gera, J.; Wilson, R. J.; Enevoldson, E. K.; Nguyen, L. T.

1981-01-01

Improved handling qualities of fighter aircraft at high angles of attack can be provided by various stability and control augmentation techniques. NASA and the U.S. Navy are conducting a joint flight demonstration of these techniques on an F-14 airplane. This paper reports on the flight test experience with a newly designed lateral-directional control system which suppresses such high angle of attack handling qualities problems as roll reversal, wing rock, and directional divergence while simultaneously improving departure/spin resistance. The technique of integrating a piloted simulation into the flight program was used extensively in this program. This technique had not been applied previously to high angle of attack testing and required the development of a valid model to simulate the test airplane at extremely high angles of attack.

An Investigation of the Aerodynamic Characteristics of an 0.08-Scale Model of the Chance Vought XF7U-1 Airplane in the Langley High-Speed 7-by 10-Foot Tunnel: TED No. DE308. Part 6; Estimated High-Speed Flying Qualities

NASA Technical Reports Server (NTRS)

Donlan, Charles J.; Kuhn, Richard E.

1948-01-01

An analysis of the estimated high-speed flying qualities of the Chance Vought XF7U-1 airplane in the Mach number range from 0.40 to 0.91 has been made, based on tests of an 0.08-scale model of this airplane in the Langley high-speed 7- by 10-foot wind tunnel. The analysis indicates longitudinal control-position instability at transonic speeds, but the accompanying trim changes are not large. Control-position maneuvering stability, however, is present for all speeds. Longitudinal lateral control appear adequate, but the damping of the short-period longitudinal and lateral oscillations at high altitudes is poor and may require artificial damping.

Handling Qualities of Model Reference Adaptive Controllers with Varying Complexity for Pitch-Roll Coupled Failures

NASA Technical Reports Server (NTRS)

Schaefer, Jacob; Hanson, Curt; Johnson, Marcus A.; Nguyen, Nhan

2011-01-01

Three model reference adaptive controllers (MRAC) with varying levels of complexity were evaluated on a high performance jet aircraft and compared along with a baseline nonlinear dynamic inversion controller. The handling qualities and performance of the controllers were examined during failure conditions that induce coupling between the pitch and roll axes. Results from flight tests showed with a roll to pitch input coupling failure, the handling qualities went from Level 2 with the baseline controller to Level 1 with the most complex MRAC tested. A failure scenario with the left stabilator frozen also showed improvement with the MRAC. Improvement in performance and handling qualities was generally seen as complexity was incrementally added; however, added complexity usually corresponds to increased verification and validation effort required for certification. The tradeoff between complexity and performance is thus important to a controls system designer when implementing an adaptive controller on an aircraft. This paper investigates this relation through flight testing of several controllers of vary complexity.

CIDR

Science.gov Websites

quality, cutting-edge genomic services and technologies in order to expand our understanding of disease high quality next generation sequencing and genotyping services to investigators working to discover issues as they relate to study design, data production and quality control. Completed studies encompass

Development of an advanced pitch active control system for a wide body jet aircraft

NASA Technical Reports Server (NTRS)

Guinn, Wiley A.; Rising, Jerry J.; Davis, Walt J.

1984-01-01

An advanced PACS control law was developed for a commercial wide-body transport (Lockheed L-1011) by using modern control theory. Validity of the control law was demonstrated by piloted flight simulation tests on the NASA Langley visual motion simulator. The PACS design objective was to develop a PACS that would provide good flying qualities to negative 10 percent static stability margins that were equivalent to those of the baseline aircraft at a 15 percent static stability margin which is normal for the L-1011. Also, the PACS was to compensate for high-Mach/high-g instabilities that degrade flying qualities during upset recoveries and maneuvers. The piloted flight simulation tests showed that the PACS met the design objectives. The simulation demonstrated good flying qualities to negative 20 percent static stability margins for hold, cruise and high-speed flight conditions. Analysis and wind tunnel tests performed on other Lockheed programs indicate that the PACS could be used on an advanced transport configuration to provide a 4 percent fuel savings which results from reduced trim drag by flying at negative static stability margins.

Near-infrared Spectroscopy in the Brewing Industry.

PubMed

Sileoni, Valeria; Marconi, Ombretta; Perretti, Giuseppe

2015-01-01

This article offers an exhaustive description of the use of Near-Infrared (NIR) Spectroscopy in the brewing industry. This technique is widely used for quality control testing of raw materials, intermediates, and finished products, as well as process monitoring during malting and brewing. In particular, most of the reviewed works focus on the assessment of barley properties, aimed at quickly selecting the best barley varieties in order to produce a high-quality malt leading to high-quality beer. Various works concerning the use of NIR in the evaluation of raw materials, such as barley, malt, hop, and yeast, are also summarized here. The implementation of NIR sensors for the control of malting and brewing processes is also highlighted, as well as the use of NIR for quality assessment of the final product.

Frequency analysis of urban runoff quality in an urbanizing catchment of Shenzhen, China

NASA Astrophysics Data System (ADS)

Qin, Huapeng; Tan, Xiaolong; Fu, Guangtao; Zhang, Yingying; Huang, Yuefei

2013-07-01

This paper investigates the frequency distribution of urban runoff quality indicators using a long-term continuous simulation approach and evaluates the impacts of proposed runoff control schemes on runoff quality in an urbanizing catchment in Shenzhen, China. Four different indicators are considered to provide a comprehensive assessment of the potential impacts: total runoff depth, event pollutant load, Event Mean Concentration, and peak concentration during a rainfall event. The results obtained indicate that urban runoff quantity and quality in the catchment have significant variations in rainfall events and a very high rate of non-compliance with surface water quality regulations. Three runoff control schemes with the capacity to intercept an initial runoff depth of 5 mm, 10 mm, and 15 mm are evaluated, respectively, and diminishing marginal benefits are found with increasing interception levels in terms of water quality improvement. The effects of seasonal variation in rainfall events are investigated to provide a better understanding of the performance of the runoff control schemes. The pre-flood season has higher risk of poor water quality than other seasons after runoff control. This study demonstrates that frequency analysis of urban runoff quantity and quality provides a probabilistic evaluation of pollution control measures, and thus helps frame a risk-based decision making for urban runoff quality management in an urbanizing catchment.

The quantitative control and matching of an optical false color composite imaging system

NASA Astrophysics Data System (ADS)

Zhou, Chengxian; Dai, Zixin; Pan, Xizhe; Li, Yinxi

1993-10-01

Design of an imaging system for optical false color composite (OFCC) capable of high-precision density-exposure time control and color balance is presented. The system provides high quality FCC image data that can be analyzed using a quantitative calculation method. The quality requirement to each part of the image generation system is defined, and the distribution of satellite remote sensing image information is analyzed. The proposed technology makes it possible to present the remote sensing image data more effectively and accurately.

Cancer control in developing countries: using health data and health services research to measure and improve access, quality and efficiency.

PubMed

Hanna, Timothy P; Kangolle, Alfred C T

2010-10-13

Cancer is a rapidly increasing problem in developing countries. Access, quality and efficiency of cancer services in developing countries must be understood to advance effective cancer control programs. Health services research can provide insights into these areas. This article provides an overview of oncology health services in developing countries. We use selected examples from peer-reviewed literature in health services research and relevant publicly available documents. In spite of significant limitations in the available data, it is clear there are substantial barriers to access to cancer control in developing countries. This includes prevention, early detection, diagnosis/treatment and palliation. There are also substantial limitations in the quality of cancer control and a great need to improve economic efficiency. We describe how the application of health data may assist in optimizing (1) Structure: strengthening planning, collaboration, transparency, research development, education and capacity building. (2) PROCESS: enabling follow-up, knowledge translation, patient safety and quality assurance. (3) OUTCOME: facilitating evaluation, monitoring and improvement of national cancer control efforts. There is currently limited data and capacity to use this data in developing countries for these purposes. There is an urgent need to improve health services for cancer control in developing countries. Current resources and much-needed investments must be optimally managed. To achieve this, we would recommend investment in four key priorities: (1) Capacity building in oncology health services research, policy and planning relevant to developing countries. (2) Development of high-quality health data sources. (3) More oncology-related economic evaluations in developing countries. (4) Exploration of high-quality models of cancer control in developing countries. Meeting these needs will require national, regional and international collaboration as well as political leadership. Horizontal integration with programs for other diseases will be important.

Importance of good manufacturing practices in microbiological monitoring in processing human tissues for transplant.

PubMed

Pianigiani, Elisa; Ierardi, Francesca; Fimiani, Michele

2013-12-01

Skin allografts represent an important therapeutic resource in the treatment of severe skin loss. The risk associated with application of processed tissues in humans is very low, however, human material always carries the risk of disease transmission. To minimise the risk of contamination of grafts, processing is carried out in clean rooms where air quality is monitored. Procedures and quality control tests are performed to standardise the production process and to guarantee the final product for human use. Since we only validate and distribute aseptic tissues, we conducted a study to determine what type of quality controls for skin processing are the most suitable for detecting processing errors and intercurrent contamination, and for faithfully mapping the process without unduly increasing production costs. Two different methods for quality control were statistically compared using the Fisher exact test. On the basis of the current study we selected our quality control procedure based on pre- and post-processing tissue controls, operator and environmental controls. Evaluation of the predictability of our control methods showed that tissue control was the most reliable method of revealing microbial contamination of grafts. We obtained 100 % sensitivity by doubling tissue controls, while maintaining high specificity (77 %).

Fourth High Alpha Conference, volume 1

NASA Technical Reports Server (NTRS)

1994-01-01

The goal of the Fourth High Alpha Conference was to focus on the flight validation of high angle-of-attack technologies and provide an in-depth review of the latest high angle-of-attack activities. Areas that were covered include: high angle-of-attack aerodynamics, propulsion and inlet dynamics, thrust vectoring, control laws and handling qualities, tactical utility, and forebody controls.

[Development of new approaches for objective dental tissue characteristiсs reproduction for preparation of highly aesthetical restoration].

PubMed

Makeeva, I M; Moskalev, E E; Kuz'ko, E I

2010-01-01

A new method of color quality control based on spectrophotometry has been developed for dental restoration. A comparative analysis of quality of subjective color control by trained and non-trained observers has been made. Based on comparative analysis of the results of subjective color-control and spectrophotometry the maximum amount of allowed color difference has been set (dE=2.8).

Millimeter-Wave Voltage-Controlled Oscillators in 0.13-micrometer CMOS Technology

DTIC Science & Technology

2006-06-01

controlled oscillators. Varactor , transistor, and in- ductor designs are optimized to reduce the parasitic capacitances. An investigation of tradeoff between...quality factor and tuning range for MOS varactors at 24 GHz has shown that the polysilicon gate lengths between 0.18 and 0.24 m result both good...millimeter wave, MOS varactor , quality factor, transmission line, voltage-controlled oscillator (VCO). I. INTRODUCTION WITH THE RAPID advance of high

Shaping Performance: Do International Accreditations and Quality Management Really Help?

ERIC Educational Resources Information Center

Nigsch, Stefano; Schenker-Wicki, Andrea

2013-01-01

In recent years, international accreditations have become an important form of quality management for business schools all over the world. However, given their high costs and the risk of increasing bureaucratisation and control, accreditations remain highly disputed in academia. This paper uses quantitative data to assess whether accreditations…

Quality Control Specialist | Center for Cancer Research

Cancer.gov

Within the Leidos Biomedical Research Inc.’s Clinical Research Directorate, the Clinical Monitoring Research Program (CMRP) provides high-quality comprehensive and strategic operational support to the high-profile domestic and international clinical research initiatives of the National Cancer Institute (NCI), National Institute of Allergy and Infectious Diseases (NIAID),

Field Methods and Quality-Assurance Plan for Quality-of-Water Activities, U.S. Geological Survey, Idaho National Laboratory, Idaho

USGS Publications Warehouse

Knobel, LeRoy L.; Tucker, Betty J.; Rousseau, Joseph P.

2008-01-01

Water-quality activities conducted by the staff of the U.S. Geological Survey (USGS) Idaho National Laboratory (INL) Project Office coincide with the USGS mission of appraising the quantity and quality of the Nation's water resources. The activities are conducted in cooperation with the U.S. Department of Energy's (DOE) Idaho Operations Office. Results of the water-quality investigations are presented in various USGS publications or in refereed scientific journals. The results of the studies are highly regarded, and they are used with confidence by researchers, regulatory and managerial agencies, and interested civic groups. In its broadest sense, quality assurance refers to doing the job right the first time. It includes the functions of planning for products, review and acceptance of the products, and an audit designed to evaluate the system that produces the products. Quality control and quality assurance differ in that quality control ensures that things are done correctly given the 'state-of-the-art' technology, and quality assurance ensures that quality control is maintained within specified limits.

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2005 through June 2007

USGS Publications Warehouse

Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

2009-01-01

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2005 through June 2007. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: total aluminum, calcium, magnesium, nitrate (colorimetric method), potassium, silicon, sodium, and sulfate. Eight of the analytical procedures were biased throughout the analysis period for the high-concentration sample, but were within control limits; these procedures were: total aluminum, calcium, dissolved organic carbon, chloride, nitrate (ion chromatograph), potassium, silicon, and sulfate. The magnesium and pH procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The acid-neutralizing capacity, total monomeric aluminum, nitrite, and specific conductance procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicated that the procedures for 16 of 17 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for dissolved organic carbon. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 93 percent of the samples met data-quality objectives for all analytes except acid-neutralizing capacity (85 percent of samples met objectives), total monomeric aluminum (83 percent of samples met objectives), total aluminum (85 percent of samples met objectives), and chloride (85 percent of samples met objectives). The ammonium and total dissolved nitrogen did not meet the data-quality objectives. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project met the Troy Laboratory data-quality objectives for 87 percent of the samples analyzed. The P-sample (low-ionic-strength constituents) analysis had two outliers each in two studies. The T-sample (trace constituents) analysis and the N-sample (nutrient constituents) analysis had one outlier each in two studies. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 85 percent of the samples met data-quality objectives for 11 of the 14 analytes; the exceptions were acid-neutralizing capacity, total aluminum and ammonium. Data-quality objectives were not met in 41 percent of samples analyzed for acid-neutralizing capacity, 50 percent of samples analyzed for total aluminum, and 44 percent of samples analyzed for ammonium. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 86 percent of the samples analyzed for calcium, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 76 percent of the samples analyzed for chloride, 80 percent of the samples analyzed for specific conductance, and 77 percent of the samples analyzed for sulfate.

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York - July 2001 Through June 2003

USGS Publications Warehouse

Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

2009-01-01

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance and quality-control data were stored in the laboratory's Lab Master data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality control samples analyzed from July 2001 through June 2003. Results for the quality-control samples for 19 analytical procedures were evaluated for bias and precision. Control charts indicate that data for six of the analytical procedures were occasionally biased for either high-concentration or low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, chloride, magnesium, nitrate (ion chromatography), potassium, and sodium. The calcium procedure was biased throughout the analysis period for the high-concentration sample, but was within control limits. The total monomeric aluminum and fluoride procedures were biased throughout the analysis period for the low-concentration sample, but were within control limits. The total aluminum, pH, specific conductance, and sulfate procedures were biased for the high-concentration and low-concentration samples, but were within control limits. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 16 of 18 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. The data-quality objective was not met for the dissolved organic carbon or specific conductance procedures. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 18 of the 21 analytes. At least 90 percent of the samples met data-quality objectives for all procedures except total monomeric aluminum (83 percent of samples met objectives), total aluminum (76 percent of samples met objectives), ammonium (73 percent of samples met objectives), dissolved organic carbon (86 percent of samples met objectives), and nitrate (81 percent of samples met objectives). The data-quality objective was not met for the nitrite procedure. Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated satisfactory or above data quality over the time period, with most performance ratings for each sample in the good-to-excellent range. The N-sample (nutrient constituents) analysis had one unsatisfactory rating for the ammonium procedure in one study. The T-sample (trace constituents) analysis had one unsatisfactory rating for the magnesium procedure and one marginal rating for the potassium procedure in one study and one unsatisfactory rating for the sodium procedure in another. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 90 percent of the samples met data-quality objectives for 10 of the 14 analytes; the exceptions were acid-neutralizing capacity, ammonium, dissolved organic carbon, and sodium. Data-quality objectives were not met in 37 percent of samples analyzed for acid-neutralizing capacity, 28 percent of samples analyzed for dissolved organic carbon, and 30 percent of samples analyzed for sodium. Results indicate a positive bias for the ammonium procedure in one study and a negative bias in another. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 90 percent of the samples analyzed for calcium, chloride, magnesium, pH, potassium, and sodium. Data-quality objectives were met by 78 percent of

SUGAR: graphical user interface-based data refiner for high-throughput DNA sequencing.

PubMed

Sato, Yukuto; Kojima, Kaname; Nariai, Naoki; Yamaguchi-Kabata, Yumi; Kawai, Yosuke; Takahashi, Mamoru; Mimori, Takahiro; Nagasaki, Masao

2014-08-08

Next-generation sequencers (NGSs) have become one of the main tools for current biology. To obtain useful insights from the NGS data, it is essential to control low-quality portions of the data affected by technical errors such as air bubbles in sequencing fluidics. We develop a software SUGAR (subtile-based GUI-assisted refiner) which can handle ultra-high-throughput data with user-friendly graphical user interface (GUI) and interactive analysis capability. The SUGAR generates high-resolution quality heatmaps of the flowcell, enabling users to find possible signals of technical errors during the sequencing. The sequencing data generated from the error-affected regions of a flowcell can be selectively removed by automated analysis or GUI-assisted operations implemented in the SUGAR. The automated data-cleaning function based on sequence read quality (Phred) scores was applied to a public whole human genome sequencing data and we proved the overall mapping quality was improved. The detailed data evaluation and cleaning enabled by SUGAR would reduce technical problems in sequence read mapping, improving subsequent variant analysis that require high-quality sequence data and mapping results. Therefore, the software will be especially useful to control the quality of variant calls to the low population cells, e.g., cancers, in a sample with technical errors of sequencing procedures.

Spatially-controlled illumination with rescan confocal microscopy enhances image quality, resolution and reduces photodamage

NASA Astrophysics Data System (ADS)

Krishnaswami, Venkataraman; De Luca, Giulia M. R.; Breedijk, Ronald M. P.; Van Noorden, Cornelis J. F.; Manders, Erik M. M.; Hoebe, Ron A.

2017-02-01

Fluorescence microscopy is an important tool in biomedical imaging. An inherent trade-off lies between image quality and photodamage. Recently, we have introduced rescan confocal microscopy (RCM) that improves the lateral resolution of a confocal microscope down to 170 nm. Previously, we have demonstrated that with controlled-light exposure microscopy, spatial control of illumination reduces photodamage without compromising image quality. Here, we show that the combination of these two techniques leads to high resolution imaging with reduced photodamage without compromising image quality. Implementation of spatially-controlled illumination was carried out in RCM using a line scanning-based approach. Illumination is spatially-controlled for every line during imaging with the help of a prediction algorithm that estimates the spatial profile of the fluorescent specimen. The estimation is based on the information available from previously acquired line images. As a proof-of-principle, we show images of N1E-115 neuroblastoma cells, obtained by this new setup with reduced illumination dose, improved resolution and without compromising image quality.

Double-quality control reveals high-level toxicity in gloves used for operator protection in assisted reproductive technology.

PubMed

Lierman, Sylvie; De Sutter, Petra; Dhont, Marc; Van der Elst, Josiane

2007-10-01

To submit different glove brands to double-quality control tests using mouse embryo assay (MEA) and the human sperm motility assay (HuSMA). Operator protection against infectious body fluid contamination is a safety issue in assisted reproductive technology (ART). When using gloves in the ART laboratory, toxic substances can be transmitted to culture media, even during brief contact. Quality control study of gloves in ART. University hospital-based infertility center. Seven- to 8-week-old female B6D2F1 hybrid mice. We tested two surgical, two cleanroom, and six examination glove brands. Only gloves brands that passed both HuSMA and MEA were submitted to further QC using zona-free and/or cryopreserved MEA. Sperm motility index, two-cell and blastocyst development, blastocyst total cell number. Quality control by MEA and HuSMA identified two glove brands to be nontoxic. Our study shows that gloves used in ART can be toxic and should be tested as part of an ongoing quality control program.

Composite adaptive control of belt polishing force for aero-engine blade

NASA Astrophysics Data System (ADS)

Zhsao, Pengbing; Shi, Yaoyao

2013-09-01

The existing methods for blade polishing mainly focus on robot polishing and manual grinding. Due to the difficulty in high-precision control of the polishing force, the blade surface precision is very low in robot polishing, in particular, quality of the inlet and exhaust edges can not satisfy the processing requirements. Manual grinding has low efficiency, high labor intensity and unstable processing quality, moreover, the polished surface is vulnerable to burn, and the surface precision and integrity are difficult to ensure. In order to further improve the profile accuracy and surface quality, a pneumatic flexible polishing force-exerting mechanism is designed and a dual-mode switching composite adaptive control(DSCAC) strategy is proposed, which combines Bang-Bang control and model reference adaptive control based on fuzzy neural network(MRACFNN) together. By the mode decision-making mechanism, Bang-Bang control is used to track the control command signal quickly when the actual polishing force is far away from the target value, and MRACFNN is utilized in smaller error ranges to improve the system robustness and control precision. Based on the mathematical model of the force-exerting mechanism, simulation analysis is implemented on DSCAC. Simulation results show that the output polishing force can better track the given signal. Finally, the blade polishing experiments are carried out on the designed polishing equipment. Experimental results show that DSCAC can effectively mitigate the influence of gas compressibility, valve dead-time effect, valve nonlinear flow, cylinder friction, measurement noise and other interference on the control precision of polishing force, which has high control precision, strong robustness, strong anti-interference ability and other advantages compared with MRACFNN. The proposed research achieves high-precision control of the polishing force, effectively improves the blade machining precision and surface consistency, and significantly reduces the surface roughness.

Express quality control of chicken eggs by machine vision

NASA Astrophysics Data System (ADS)

Gorbunova, Elena V.; Chertov, Aleksandr N.; Peretyagin, Vladimir S.; Korotaev, Valery V.; Arbuzova, Evgeniia A.

2017-06-01

The urgency of the task of analyzing the foodstuffs quality is determined by the strategy for the formation of a healthy lifestyle and the rational nutrition of the world population. This applies to products, such as chicken eggs. In particular, it is necessary to control the chicken eggs quality at the farm production prior to incubation in order to eliminate the possible hereditary diseases, as well as high embryonic mortality and a sharp decrease in the quality of the bred young. Up to this day, in the market there are no objective instruments of contactless express quality control as analytical equipment that allow the high-precision quality examination of the chicken eggs, which is determined by the color parameters of the eggshell (color uniformity) and yolk of eggs, and by the presence in the eggshell of various defects (cracks, growths, wrinkles, dirty). All mentioned features are usually evaluated only visually (subjectively) with the help of normalized color standards and ovoscopes. Therefore, this work is devoted to the investigation of the application opportunities of contactless express control method with the help of technical vision to implement the chicken eggs' quality analysis. As a result of the studies, a prototype with the appropriate software was proposed. Experimental studies of this equipment on a representative sample of eggs from chickens of different breeds have been carried out (the total number of analyzed samples exceeds 300 pieces). The correctness of the color analysis was verified by spectrophotometric studies of the surface of the eggshell.

Instrumental Surveillance of Water Quality.

ERIC Educational Resources Information Center

Miller, J. A.; And Others

The role analytical instrumentation performs in the surveillance and control of the quality of water resources is reviewed. Commonly performed analyses may range from simple tests for physical parameters to more highly sophisticated radiological or spectrophotometric methods. This publication explores many of these types of water quality analyses…

A novel non-uniform control vector parameterization approach with time grid refinement for flight level tracking optimal control problems.

PubMed

Liu, Ping; Li, Guodong; Liu, Xinggao; Xiao, Long; Wang, Yalin; Yang, Chunhua; Gui, Weihua

2018-02-01

High quality control method is essential for the implementation of aircraft autopilot system. An optimal control problem model considering the safe aerodynamic envelop is therefore established to improve the control quality of aircraft flight level tracking. A novel non-uniform control vector parameterization (CVP) method with time grid refinement is then proposed for solving the optimal control problem. By introducing the Hilbert-Huang transform (HHT) analysis, an efficient time grid refinement approach is presented and an adaptive time grid is automatically obtained. With this refinement, the proposed method needs fewer optimization parameters to achieve better control quality when compared with uniform refinement CVP method, whereas the computational cost is lower. Two well-known flight level altitude tracking problems and one minimum time cost problem are tested as illustrations and the uniform refinement control vector parameterization method is adopted as the comparative base. Numerical results show that the proposed method achieves better performances in terms of optimization accuracy and computation cost; meanwhile, the control quality is efficiently improved. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Development of a Model Following Control Law for Inflight Simulation and Flight Controls Research

NASA Technical Reports Server (NTRS)

Takahashi, Mark; Fletcher, Jay; Aiken, Edwin W. (Technical Monitor)

1994-01-01

The U.S. Army and NASA are currently developing the Rotorcraft Aircrew Systems Concepts Airborne Laboratory (RASCAL) at the Ames Research Center. RASCAL, shown in Figure 1, is a UH-60, which is being modified in a phased development program to have a research fly-by-wire flight control system, and an advanced navigation research platform. An important part of the flight controls and handling qualities research on RASCAL will be an FCS design for the aircraft to achieve high bandwidth control responses and disturbance rejection characteristics. Initially, body states will be used as feedbacks, but research into the use of rotor states will also be considered in later stages to maximize agility and maneuverability. In addition to supporting flight controls research, this FCS design will serve as the inflight simulation control law to support basic handling qualities, guidance, and displays research. Research in high bandwidth controls laws is motivated by the desire to improve the handling qualities in aggressive maneuvering and in severely degraded weather conditions. Naturally, these advantages will also improve the quality of the model following, thereby improving the inflight simulation capabilities of the research vehicle. High bandwidth in the control laws provides tighter tracking allowing for higher response bandwidths which can meet handling qualities requirements for aggressive maneuvering. System sensitivity is also reduced preventing variations in the response from the vehicle due to changing flight conditions. In addition, improved gust rejection will result from this reduced sensitivity. The gust rejection coupled with a highly stable system will make more precise maneuvering and pointing possible in severely degraded weather conditions. The difficulty in achieving higher bandwidths from the control laws in the feedback and in the responses arises from the complexity of the models that are needed to produce a satisfactory design. In this case, high quality models that include rotor dynamics in a physically meaningful context must be available. A non-physical accounting of the rotor, such as lumping the effect as a time delay, is not likely to produce the desired results. High order simulation models based on first principals are satisfactory for the initial design phase in order to work out the control law design concept and get an initial set of gains. These models, however, have known deficiencies, which must be resolved in the final control law design. The error in the pitch-roll cross coupling is one notable deficiency that even sophisticated rotorcraft models including complex wake aerodynamics have yet to capture successfully. This error must be accounted for to achieve the desired decoupling. The approach to design the proposed inflight simulation control law is based on using a combination of simulation and identified models. The linear and nonlinear higher order models were used to develop an explicit model following control structure. This structure was developed to accommodate the design of control laws compliant to many of the quantitative requirements in ADS-33C. Furthermore, it also allows for control law research using rotor-state feedback and other design methodologies such as Quantitative Feedback and H-Infinity. Final gain selection will be based on higher order identified models which include rotor degrees of freedom.

High-Protein and High-Dietary Fiber Breakfasts Result in Equal Feelings of Fullness and Better Diet Quality in Low-Income Preschoolers Compared with Their Usual Breakfast.

PubMed

Kranz, Sibylle; Brauchla, Mary; Campbell, Wayne W; Mattes, Rickard D; Schwichtenberg, Amy J

2017-03-01

Background: In the United States, 17% of children are currently obese. Increasing feelings of fullness may prevent excessive energy intake, lead to better diet quality, and promote long-term maintenance of healthy weight. Objective: The purpose of this study was to develop a fullness-rating tool (aim 1) and to determine whether a high-protein (HP), high-fiber (HF), and combined HP and HF (HPHF) breakfast increases preschoolers' feelings of fullness before (pre) and after (post) breakfast and pre-lunch, as well as their diet quality, as measured by using a composite diet quality assessment tool, the Revised Children's Diet Quality Index (aim 2). Methods: Children aged 4 and 5 y ( n = 41; 22 girls and 19 boys) from local Head Start centers participated in this randomized intervention trial. Sixteen percent of boys and 32% of girls were overweight or obese. After the baseline week, children rotated through four 1-wk periods of consuming ad libitum HP (19-20 g protein), HF (10-11 g fiber), HPHF (19-21 g protein, 10-12 g fiber), or usual (control) breakfasts. Food intake at breakfast was estimated daily, and for breakfast, lunch, and snack on day 3 of each study week Student's t tests and ANOVA were used to determine statistical differences. Results: Children's post-breakfast and pre-lunch fullness ratings were ≥1 point higher than those of pre-breakfast (aim 1). Although children consumed, on average, 65 kcal less energy during the intervention breakfasts ( P < 0.007) than during the control breakfast, fullness ratings did not differ ( P = 0.76). Relative to the control breakfast, improved diet quality (12%) was calculated for the HP and HF breakfasts ( P < 0.027) but not for the HPHF breakfast (aim 2). Conclusions: Post-breakfast fullness ratings were not affected by the intervention breakfasts relative to the control breakfast. HP and HF breakfasts resulted in higher diet quality. Serving HP or HF breakfasts may be valuable in improving diet quality without lowering feelings of satiation or satiety. This trial was registered at clinicaltrials.gov as NCT02122224. © 2017 American Society for Nutrition.

Intercropping of oat and field pea in Alaska: an alternative approach to quality forage production and weed control

USDA-ARS?s Scientific Manuscript database

Intercropping of legumes with non-legumes is an ancient crop production method used to improve quality and dry matter (DM) yields of forage and grain, and to control weeds. However, there is little information regarding intercropping at high latitudes. The objectives of this field study were to eval...

10 CFR Appendix I to Part 110 - Illustrative List of Reprocessing Plant Components Under NRC Export Licensing Authority

Code of Federal Regulations, 2011 CFR

2011-01-01

... assurance and quality control techniques) out of low carbon stainless steels, titanium, zirconium or other... materials such as low carbon stainless steels, titanium or zirconium, or other high quality materials... features for control of nuclear criticality: (i) Walls or internal structures with a boron equivalent of at...

[Pharmaceutical product quality control and good manufacturing practices].

PubMed

Hiyama, Yukio

2010-01-01

This report describes the roles of Good Manufacturing Practices (GMP) in pharmaceutical product quality control. There are three keys to pharmaceutical product quality control. They are specifications, thorough product characterization during development, and adherence to GMP as the ICH Q6A guideline on specifications provides the most important principles in its background section. Impacts of the revised Pharmaceutical Affairs Law (rPAL) which became effective in 2005 on product quality control are discussed. Progress of ICH discussion for Pharmaceutical Development (Q8), Quality Risk Management (Q9) and Pharmaceutical Quality System (Q10) are reviewed. In order to reconstruct GMP guidelines and GMP inspection system in the regulatory agencies under the new paradigm by rPAL and the ICH, a series of Health Science studies were conducted. For GMP guidelines, product GMP guideline, technology transfer guideline, laboratory control guideline and change control system guideline were written. For the GMP inspection system, inspection check list, inspection memo and inspection scenario were proposed also by the Health Science study groups. Because pharmaceutical products and their raw materials are manufactured and distributed internationally, collaborations with other national authorities are highly desired. In order to enhance the international collaborations, consistent establishment of GMP inspection quality system throughout Japan will be essential.

Activity and participation, quality of life and user satisfaction outcomes of environmental control systems and smart home technology: a systematic review.

PubMed

Brandt, Ase; Samuelsson, Kersti; Töytäri, Outi; Salminen, Anna-Liisa

2011-01-01

To examine activity and participation, quality of life, and user satisfaction outcomes of environmental control systems (ECSs) and smart home technology (SHT) interventions for persons with impairments. A systematic review. Seventeen databases, three conference proceedings, and two journals were searched without language or study design restrictions covering the period January 1993 - June 2009. Reviewers selected studies, extracted data, and assessed the methodological quality independently. Of 1739 studies identified, five effect studies and six descriptive studies were included. One study was on SHT and the remainder on ECS; functionalities were overlapping. The studies varied in most aspects, and no synthesis could be drawn. However, ECS/SHT tended to increase study participants' independence, instrumental activities of daily living, socialising, and quality of life. Two studies showed high user satisfaction. The level of evidence was regarded as low, mainly due to small study sizes, lacking confounder control, and a majority of descriptive studies. Due to few and small studies and study diversity, it was not possible to determine whether ECS/SHT have positive outcomes for persons with impairment, even though the technologies seem to be promising. High quality outcomes studies such as randomised controlled trials, when feasible, and large longitudinal multi-centre studies are required.

High beam quality and high energy short-pulse laser with MOPA

NASA Astrophysics Data System (ADS)

Jin, Quanwei; Pang, Yu; Jiang, JianFeng; Tan, Liang; Cui, Lingling; Wei, Bin; Sun, Yinhong; Tang, Chun

2018-03-01

A high energy, high beam quality short-pulse diode-pumped Nd:YAG master oscillator power-amplifier (MOPA) laser with two amplifier stages is demonstrated. The two-rod birefringence compensation was used as beam quality controlling methods, which presents a short-pulse energy of 40 mJ with a beam quality value of M2 = 1.2 at a repetition rate of 400Hz. The MOPA system delivers a short-pulse energy of 712.5 mJ with a pulse width of 12.4 ns.The method of spherical aberration compensation is improved the beam quality, a M2 factor of 2.3 and an optical-to-optical efficiency of 27.7% is obtained at the maximum laser out power.The laser obtained 1.4J out energy with polarization integration.

Challenges in Routine Implementation and Quality Control of Rapid Diagnostic Tests for Malaria–Rufiji District, Tanzania

PubMed Central

McMorrow, Meredith L.; Masanja, M. Irene; Abdulla, Salim M. K.; Kahigwa, Elizeus; Kachur, S. Patrick

2018-01-01

Rapid diagnostic tests (RDTs) represent an alternative to microscopy for malaria diagnosis and have shown high sensitivity and specificity in a variety of study settings. Current World Health Organization (WHO) guidelines for quality control of RDTs provide detailed instructions on pre-field testing, but offer little guidance for quality assurance once RDTs are deployed in health facilities. From September 2006 to April 2007, we introduced a histidine-rich protein II (HRP2)-based RDT (Paracheck) for suspected malaria cases five years of age and older in nine health facilities in Rufiji District, Tanzania, to assess sensitivity and specificity of RDTs in routine use at rural health facilities. Thick blood smears were collected for all patients tested with RDTs and stained and read by laboratory personnel in each facility. Thick smears were subsequently reviewed by a reference microscopist to determine RDT sensitivity and specificity. In all nine health facilities, there were significant problems with the quality of staining and microscopy. Sensitivity and specificity of RDTs were difficult to assess given the poor quality of routine blood smear staining. Mean operational sensitivity of RDTs based on reference microscopy was 64.8%, but varied greatly by health facility, range 18.8–85.9%. Sensitivity of RDTs increased with increasing parasite density. Specificity remained high at 87.8% despite relatively poor slide quality. Institution of quality control of RDTs based on poor quality blood smear staining may impede reliable measurement of sensitivity and specificity and undermine confidence in the new diagnostic. There is an urgent need for the development of alternative quality control procedures for rapid diagnostic tests that can be performed at the facility level. PMID:18784230

High-quality mtDNA control region sequences from 680 individuals sampled across the Netherlands to establish a national forensic mtDNA reference database.

PubMed

Chaitanya, Lakshmi; van Oven, Mannis; Brauer, Silke; Zimmermann, Bettina; Huber, Gabriela; Xavier, Catarina; Parson, Walther; de Knijff, Peter; Kayser, Manfred

2016-03-01

The use of mitochondrial DNA (mtDNA) for maternal lineage identification often marks the last resort when investigating forensic and missing-person cases involving highly degraded biological materials. As with all comparative DNA testing, a match between evidence and reference sample requires a statistical interpretation, for which high-quality mtDNA population frequency data are crucial. Here, we determined, under high quality standards, the complete mtDNA control-region sequences of 680 individuals from across the Netherlands sampled at 54 sites, covering the entire country with 10 geographic sub-regions. The complete mtDNA control region (nucleotide positions 16,024-16,569 and 1-576) was amplified with two PCR primers and sequenced with ten different sequencing primers using the EMPOP protocol. Haplotype diversity of the entire sample set was very high at 99.63% and, accordingly, the random-match probability was 0.37%. No population substructure within the Netherlands was detected with our dataset. Phylogenetic analyses were performed to determine mtDNA haplogroups. Inclusion of these high-quality data in the EMPOP database (accession number: EMP00666) will improve its overall data content and geographic coverage in the interest of all EMPOP users worldwide. Moreover, this dataset will serve as (the start of) a national reference database for mtDNA applications in forensic and missing person casework in the Netherlands. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Automated stent defect detection and classification with a high numerical aperture optical system

NASA Astrophysics Data System (ADS)

Bermudez, Carlos; Laguarta, Ferran; Cadevall, Cristina; Matilla, Aitor; Ibañez, Sergi; Artigas, Roger

2017-06-01

Stent quality control is a highly critical process. Cardiovascular stents have to be inspected 100% so as no defective stent is implanted in a human body. However, this visual control is currently performed manually and every stent could need tenths of minutes to be inspected. In this paper, a novel optical inspection system is presented. By the combination of a high numerical aperture (NA) optical system, a rotational stage and a line-scan camera, unrolled sections of the outer and inner surfaces of the stent are obtained and image-processed at high speed. Defects appearing in those surfaces and also in the edges are extremely contrasted due to the shadowing effect of the high NA illumination and acquisition approach. Therefore by means of morphological operations and a sensitivity parameter, defects are detected. Based on a trained defect library, a binary classifier sorts each kind of defect through a set of scoring vectors, providing the quality operator with all the required information to finally take a decision. We expect this new approach to make defect detection completely objective and to dramatically reduce the time and cost of stent quality control stage.

Effect of paper quality on the response rate to a postal survey: A randomised controlled trial. [ISRCTN32032031

PubMed Central

Clark, T Justin; Khan, Khalid S; Gupta, Janesh K

2001-01-01

Background Response rates to surveys are declining and this threatens the validity and generalisability of their findings. We wanted to determine whether paper quality influences the response rate to postal surveys Methods A postal questionnaire was sent to all members of the British Society of Gynaecological Endoscopy (BSGE). Recipients were randomised to receiving the questionnaire printed on standard quality paper or high quality paper. Results The response rate for the recipients of high quality paper was 43/195 (22%) and 57/194 (29%) for standard quality paper (relative rate of response 0.75, 95% CI 0.33–1.05, p = 0.1 Conclusion The use of high quality paper did not increase response rates to a questionnaire survey of gynaecologists affiliated to an endoscopic society. PMID:11782286

Air-insufflated high-definition dacryoendoscopy yields significantly better image quality than conventional dacryoendoscopy.

PubMed

Sasaki, Tsugihisa; Sounou, Tsutomu; Tsuji, Hideki; Sugiyama, Kazuhisa

2017-01-01

To facilitate the analysis of lacrimal conditions, we utilized high-definition dacryoendoscopy (HDD) and undertook observations with a pressure-controlled air-insufflation system. We report the safety and performance of HDD. In this retrospective, non-randomized clinical trial, 46 patients (14 males and 32 females; age range 39-91 years; mean age ± SD 70.3±12.0 years) who had lacrimal disorders were examined with HDD and conventional dacryoendoscopy (CD). The high-definition dacryoendoscope had 15,000 picture element image fibers and an advanced objective lens. Its outer diameter was 0.9-1.2 mm. Air insufflation was controlled at 0-20 kPa with a digital manometer-based pressure-controlled air-insufflation system to evaluate the quality of the image. The HDD had an air/saline irrigation channel between the outer sheath (outer diameter =1.2 mm) and the metal inner sheath of the endoscope. We used it and the CD in air, saline, and diluted milk saline with and without manual irrigation to quantitatively evaluate the effect of air pressure and saline irrigation on image quality. In vivo, the most significant improvement in image quality was demonstrated with air-insufflated (5-15 kPa) HDD, as compared with saline-irrigated HDD and saline-irrigated CD. No emphysema or damage was noted under observation with HDD. In vitro, no significant difference was demonstrated between air-insufflated HDD and saline-irrigated HDD. In vitro, the image quality of air-insufflated HDD was significantly improved as compared with that of saline-irrigated CD. Pressure-controlled (5-15 kPa) air-insufflated HDD is safe, and yields significantly better image quality than CD and saline-irrigated HDD.

Exposure–Response Relationship Between Aircraft Noise and Sleep Quality: A Community-based Cross-sectional Study

PubMed Central

Kim, Soo Jeong; Chai, Sang Kug; Lee, Keou Won; Park, Jae-Beom; Min, Kyoung-Bok; Kil, Hyun Gwon; Lee, Chan; Lee, Kyung Jong

2014-01-01

Objectives Exposure to aircraft noise has been shown to have adverse health effects, causing annoyance and affecting the health-related quality of life, sleep, and mental states of those exposed to it. This study aimed to determine sleep quality in participants residing near an airfield and to evaluate the relationship between the levels of aircraft noise and sleep quality. Methods Neighboring regions of a military airfield were divided into three groups: a high exposure group, a low exposure group, and a control group. A total of 1082 participants (aged 30–79 years) completed a comprehensive self-administered questionnaire requesting information about demographics, medical history, lifestyle, and the Pittsburgh Sleep Quality Index. Results Of the 1082 participants, 1005 qualified for this study. The prevalence of sleep disturbance was 45.5% in the control group, 71.8% in the low exposure group, and 77.1% in the high exposure group (p for trend < 0.001). After adjusting for potential confounding factors, we determined the exposure–response relationship between the degree of aircraft noise and sleep quality. Of the participants with a normal mental status, the prevalence of sleep disturbance was 2.61-fold higher in the low exposure group and 3.52-fold higher in the high exposure group than in the control group. Conclusion The relationship between aircraft noise and health should be further evaluated through a large-scale follow-up study. PMID:24955321

Instrument Quality Control.

PubMed

Jayakody, Chatura; Hull-Ryde, Emily A

2016-01-01

Well-defined quality control (QC) processes are used to determine whether a certain procedure or action conforms to a widely accepted standard and/or set of guidelines, and are important components of any laboratory quality assurance program (Popa-Burke et al., J Biomol Screen 14: 1017-1030, 2009). In this chapter, we describe QC procedures useful for monitoring the accuracy and precision of laboratory instrumentation, most notably automated liquid dispensers. Two techniques, gravimetric QC and photometric QC, are highlighted in this chapter. When used together, these simple techniques provide a robust process for evaluating liquid handler accuracy and precision, and critically underpin high-quality research programs.

7TH JAPAN - U.S. CONFERENCE ON DRINKING WATER QUALITY MANAGEMENT AND WASTEWATER CONTROL

EPA Science Inventory

Update on U.S. Drinking Water and Water Quality Research

The U.S. Environmental Protection Agency's (U.S. EPA) Office of Research and development continues to conduct drinking water and water quality related research to address high priority environmental problems. Curr...

MASQOT: a method for cDNA microarray spot quality control

PubMed Central

Bylesjö, Max; Eriksson, Daniel; Sjödin, Andreas; Sjöström, Michael; Jansson, Stefan; Antti, Henrik; Trygg, Johan

2005-01-01

Background cDNA microarray technology has emerged as a major player in the parallel detection of biomolecules, but still suffers from fundamental technical problems. Identifying and removing unreliable data is crucial to prevent the risk of receiving illusive analysis results. Visual assessment of spot quality is still a common procedure, despite the time-consuming work of manually inspecting spots in the range of hundreds of thousands or more. Results A novel methodology for cDNA microarray spot quality control is outlined. Multivariate discriminant analysis was used to assess spot quality based on existing and novel descriptors. The presented methodology displays high reproducibility and was found superior in identifying unreliable data compared to other evaluated methodologies. Conclusion The proposed methodology for cDNA microarray spot quality control generates non-discrete values of spot quality which can be utilized as weights in subsequent analysis procedures as well as to discard spots of undesired quality using the suggested threshold values. The MASQOT approach provides a consistent assessment of spot quality and can be considered an alternative to the labor-intensive manual quality assessment process. PMID:16223442

Importance of implementing an analytical quality control system in a core laboratory.

PubMed

Marques-Garcia, F; Garcia-Codesal, M F; Caro-Narros, M R; Contreras-SanFeliciano, T

2015-01-01

The aim of the clinical laboratory is to provide useful information for screening, diagnosis and monitoring of disease. The laboratory should ensure the quality of extra-analytical and analytical process, based on set criteria. To do this, it develops and implements a system of internal quality control, designed to detect errors, and compare its data with other laboratories, through external quality control. In this way it has a tool to detect the fulfillment of the objectives set, and in case of errors, allowing corrective actions to be made, and ensure the reliability of the results. This article sets out to describe the design and implementation of an internal quality control protocol, as well as its periodical assessment intervals (6 months) to determine compliance with pre-determined specifications (Stockholm Consensus(1)). A total of 40 biochemical and 15 immunochemical methods were evaluated using three different control materials. Next, a standard operation procedure was planned to develop a system of internal quality control that included calculating the error of the analytical process, setting quality specifications, and verifying compliance. The quality control data were then statistically depicted as means, standard deviations, and coefficients of variation, as well as systematic, random, and total errors. The quality specifications were then fixed and the operational rules to apply in the analytical process were calculated. Finally, our data were compared with those of other laboratories through an external quality assurance program. The development of an analytical quality control system is a highly structured process. This should be designed to detect errors that compromise the stability of the analytical process. The laboratory should review its quality indicators, systematic, random and total error at regular intervals, in order to ensure that they are meeting pre-determined specifications, and if not, apply the appropriate corrective actions. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Flight test of the X-29A at high angle of attack: Flight dynamics and controls

NASA Technical Reports Server (NTRS)

Bauer, Jeffrey E.; Clarke, Robert; Burken, John J.

1995-01-01

The NASA Dryden Flight Research Center has flight tested two X-29A aircraft at low and high angles of attack. The high-angle-of-attack tests evaluate the feasibility of integrated X-29A technologies. More specific objectives focus on evaluating the high-angle-of-attack flying qualities, defining multiaxis controllability limits, and determining the maximum pitch-pointing capability. A pilot-selectable gain system allows examination of tradeoffs in airplane stability and maneuverability. Basic fighter maneuvers provide qualitative evaluation. Bank angle captures permit qualitative data analysis. This paper discusses the design goals and approach for high-angle-of-attack control laws and provides results from the envelope expansion and handling qualities testing at intermediate angles of attack. Comparisons of the flight test results to the predictions are made where appropriate. The pitch rate command structure of the longitudinal control system is shown to be a valid design for high-angle-of-attack control laws. Flight test results show that wing rock amplitude was overpredicted and aileron and rudder effectiveness were underpredicted. Flight tests show the X-29A airplane to be a good aircraft up to 40 deg angle of attack.

Quality Audit in the Fastener Industry

NASA Technical Reports Server (NTRS)

Reagan, John R.

1995-01-01

Both the financial and quality communities rely on audits to verify customers records. The financial community is highly structured around three categories of risk, INHERENT RISK, CONTROL RISK, and DETECTION RISK. Combined, the product of these three categories constitute the AUDIT RISK. The financial community establishes CONTROL RISK based in large part on a systems level understanding of the process flow. This system level understanding is best expressed in a flowchart. The quality community may be able to adopt this structure and thereby reduce cost while maintaining and enhancing quality. The quality community should attempt to flowchart the systems level quality process before beginning substantive testing. This theory needs to be applied in several trial cases to prove or disprove this hypothesis

Quality audit in the fastener industry

NASA Astrophysics Data System (ADS)

Reagan, John R.

1995-09-01

Both the financial and quality communities rely on audits to verify customers records. The financial community is highly structured around three categories of risk, INHERENT RISK, CONTROL RISK, and DETECTION RISK. Combined, the product of these three categories constitute the AUDIT RISK. The financial community establishes CONTROL RISK based in large part on a systems level understanding of the process flow. This system level understanding is best expressed in a flowchart. The quality community may be able to adopt this structure and thereby reduce cost while maintaining and enhancing quality. The quality community should attempt to flowchart the systems level quality process before beginning substantive testing. This theory needs to be applied in several trial cases to prove or disprove this hypothesis

Methodological quality of randomized controlled trials of spinal manipulation and mobilization in tension-type headache, migraine, and cervicogenic headache.

PubMed

Fernández-de-las-Peñas, César; Alonso-Blanco, Cristina; San-Roman, Jesús; Miangolarra-Page, Juan C

2006-03-01

Literature review of quality of clinical trials. To determine the methodological quality of published randomized controlled trials that used spinal manipulation and/or mobilization to treat patients with tension-type headache (TTH), cervicogenic headache (CeH), and migraine (M) in the last decade. TTH, CeH, and M are the most prevalent types of headaches seen in adults. Individuals who have headaches frequently use physical therapy, manual therapy, or chiropractic care. Randomized controlled trials are considered an optimal method with which to assess the efficacy of any intervention. Computerized literature searches were performed in MEDLINE, EMBASE, COCHRANE, AMED, MANTIS, CINHAL, and PEDro databases. Randomized controlled trials in which spinal manipulation and/or mobilization had been used for TTH, CeH, and M published in a peer-reviewed journal as full text, and with at least 1 clinically relevant outcome measure (ie, headache intensity, duration, or frequency) were reviewed. The methodological quality of the studies was assessed independently by 2 reviewers using a set of predefined criteria. Only 8 studies met all the inclusion criteria. One clinical trial evaluated spinal manipulation and mobilization together, and the remaining 7 assessed spinal manipulative therapy. No controlled trials analyzing exclusively the effects of spinal mobilization were found. Methodological scores ranged from 35 to 56 points out of a theoretical maximum of 100 points, indicating an overall poor methodology of the studies. Only 2 studies obtained a high-quality score (greater than 50 points). No significant differences in quality scores were found based on the type of headache investigated. Methodological quality was not associated with the year of publication (before 2000, or later) nor with the results (positive, neutral, negative) reported in the studies. The most common flaws were a small sample size, the absence of a placebo control group, lack of blinded patients, and no description of the manipulative procedure. There are few published randomized controlled trials analyzing the effectiveness of spinal manipulation and/or mobilization for TTH, CeH, and M in the last decade. In addition, the methodological quality of these papers is typically low. Clearly, there is a need for high-quality randomized controlled trials assessing the effectiveness of these interventions in these headache disorders.

Multipurpose electroslag remelting furnace for modern energy and heavy engineering industry

NASA Astrophysics Data System (ADS)

Dub, A. V.; Dub, V. S.; Kriger, Yu. N.; Levkov, L. Ya.; Shurygin, D. A.; Kissel'man, M. A.; Nekhamin, C. M.; Chernyak, A. I.; Bessonov, A. V.; Kamantsev, S. V.; Sokolov, S. O.

2012-12-01

In 2011, a unique complex based on a multipurpose unit-type electroslag remelting (ESR) furnace is created to meet the demand for large high-quality solid and hollow billets for the products of power, atomic, petrochemical, and heavy machine engineering. This complex has modern low-frequency power supplies with a new control level that ensure a high homogeneity and quality of the billets and an increase in the engineering-and-economical performance of the production. A unique pilot ESR furnace is erected to adjust technological conditions and the main control system elements.

Analysis and quality control of carbohydrates in therapeutic proteins with fluorescence HPLC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Kun; Huang, Jian; Center for Informational Biology, University of Electronic Science and Technology of China, Chengdu 610054

Conbercept is an Fc fusion protein with very complicated carbohydrate profiles which must be carefully monitored through manufacturing process. Here, we introduce an optimized fluorescence derivatization high-performance liquid chromatographic method for glycan mapping in conbercept. Compared with conventional glycan analysis method, this method has much better resolution and higher reproducibility making it excellent for product quality control.

Satisfaction monitoring for quality control in campground management

Treesearch

Wilbur F. LaPage; Malcolm I. Bevins

1981-01-01

A 4-year study of camper satisfaction indicates that satisfaction monitoring is a useful tool for campground managers to assess their performance and achieve a high level of quality control in their service to the public. An indication of camper satisfaction with campground management is gained from a report card on which a small sample of visitors rates 14 elements of...

Development of a Premium Quality Plasma-derived IVIg (IQYMUNE®) Utilizing the Principles of Quality by Design-A Worked-through Case Study.

PubMed

Paolantonacci, Philippe; Appourchaux, Philippe; Claudel, Béatrice; Ollivier, Monique; Dennett, Richard; Siret, Laurent

2018-01-01

Polyvalent human normal immunoglobulins for intravenous use (IVIg), indicated for rare and often severe diseases, are complex plasma-derived protein preparations. A quality by design approach has been used to develop the Laboratoire Français du Fractionnement et des Biotechnologies new-generation IVIg, targeting a high level of purity to generate an enhanced safety profile while maintaining a high level of efficacy. A modular approach of quality by design was implemented consisting of five consecutive steps to cover all the stages from the product design to the final product control strategy.A well-defined target product profile was translated into 27 product quality attributes that formed the basis of the process design. In parallel, a product risk analysis was conducted and identified 19 critical quality attributes among the product quality attributes. Process risk analysis was carried out to establish the links between process parameters and critical quality attributes. Twelve critical steps were identified, and for each of these steps a risk mitigation plan was established.Among the different process risk mitigation exercises, five process robustness studies were conducted at qualified small scale with a design of experiment approach. For each process step, critical process parameters were identified and, for each critical process parameter, proven acceptable ranges were established. The quality risk management and risk mitigation outputs, including verification of proven acceptable ranges, were used to design the process verification exercise at industrial scale.Finally, the control strategy was established using a mix, or hybrid, of the traditional approach plus elements of the quality by design enhanced approach, as illustrated, to more robustly assign material and process controls and in order to securely meet product specifications.The advantages of this quality by design approach were improved process knowledge for industrial design and process validation and a clear justification of the process and product specifications as a basis for control strategy and future comparability exercises. © PDA, Inc. 2018.

Patients suffering from restless legs syndrome have low internal locus of control and poor psychological functioning compared to healthy controls.

PubMed

Brand, Serge; Beck, Johannes; Hatzinger, Martin; Holsboer-Trachsler, Edith

2013-01-01

Restless legs syndrome (RLS) is a disturbing sensorimotor disorder negatively influencing both sleep and psychological functioning. The aim of the present study was to assess RLS patients with respect to locus of control, sleep-related personality traits, quality of life, and sleep as compared to healthy controls. Thirty-eight patients (18 females and 20 males; mean age: 56.06 years) diagnosed with RLS and an age- and gender-matched control group (n = 42) were recruited. Participants completed a series of questionnaires related to locus of control, personality traits, quality of life, and sleep. Compared to healthy controls, RLS patients had a lower internal locus of control, unfavourable sleep-related personality traits such as low self-confidence and higher mental arousal, poorer quality of life, and more depressive symptoms. Sleep was also affected. Multiple regression analyses showed that a low internal and a high external locus of control were predicted by RLS. The pattern of results suggests that RLS is associated with a low locus of control, negative personality traits, and poor quality of life as compared to healthy controls. Copyright © 2013 S. Karger AG, Basel.

Embedding Quality Culture in Higher Education in Ghana: Quality Control and Assessment in Emerging Private Universities

ERIC Educational Resources Information Center

Ntim, Stephen

2014-01-01

High quality provision has been one of the key aims of the current reforms in higher educational institutions across the globe since the beginning of the century and the millennium. Consequently this has led to the increasing demand for quality assurance (QA). This report identifies those institutional processes and structures that support the…

Application of advanced data collection and quality assurance methods in open prospective study - a case study of PONS project.

PubMed

Wawrzyniak, Zbigniew M; Paczesny, Daniel; Mańczuk, Marta; Zatoński, Witold A

2011-01-01

Large-scale epidemiologic studies can assess health indicators differentiating social groups and important health outcomes of the incidence and mortality of cancer, cardiovascular disease, and others, to establish a solid knowledgebase for the prevention management of premature morbidity and mortality causes. This study presents new advanced methods of data collection and data management systems with current data quality control and security to ensure high quality data assessment of health indicators in the large epidemiologic PONS study (The Polish-Norwegian Study). The material for experiment is the data management design of the large-scale population study in Poland (PONS) and the managed processes are applied into establishing a high quality and solid knowledge. The functional requirements of the PONS study data collection, supported by the advanced IT web-based methods, resulted in medical data of a high quality, data security, with quality data assessment, control process and evolution monitoring are fulfilled and shared by the IT system. Data from disparate and deployed sources of information are integrated into databases via software interfaces, and archived by a multi task secure server. The practical and implemented solution of modern advanced database technologies and remote software/hardware structure successfully supports the research of the big PONS study project. Development and implementation of follow-up control of the consistency and quality of data analysis and the processes of the PONS sub-databases have excellent measurement properties of data consistency of more than 99%. The project itself, by tailored hardware/software application, shows the positive impact of Quality Assurance (QA) on the quality of outcomes analysis results, effective data management within a shorter time. This efficiency ensures the quality of the epidemiological data and indicators of health by the elimination of common errors of research questionnaires and medical measurements.

Implications of parent-child relationships for emerging adults' subjective feelings about adulthood.

PubMed

Lindell, Anna K; Campione-Barr, Nicole; Killoren, Sarah E

2017-10-01

Little is known about the role of parents in promoting their children's successful transition to adulthood, particularly for college students who may maintain stronger ties to parents than other emerging adults. The present study therefore investigated longitudinal implications of parent-child relationship qualities during emerging adults' first year of college for their feelings about the upcoming transition to adulthood 3 years later, as well as implications of 3 types of parental control (behavioral control, psychological control, helicopter parenting) for these associations. Multilevel models indicated that emerging adults who reported less negativity in their relationships with mothers and fathers felt more like adults 3 years later compared with emerging adults with low-quality relationships, while high levels of psychological control and helicopter parenting had detrimental implications for their vocational identity development and perceived competence regarding their transition to adulthood. However, nuanced interactions between parent-child relationship quality and parental control indicated that behavioral control had positive implications for outcomes if it occurred within the context of high-quality relationships, or when utilized with sons. The present study highlights the complex role that parents may play during college students' transition to adulthood, and future work should continue to examine ways that clinicians can incorporate parents as a potential resource for promoting emerging adults' successful transition to adulthood and the workforce. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Effects of multifocal soft contact lenses used to slow myopia progression on quality of vision in young adults.

PubMed

Kang, Pauline; McAlinden, Colm; Wildsoet, Christine F

2017-02-01

To assess the effects of multifocal soft contact lenses (MF SCLs) used for myopia control on visual acuity (VA) and subjective quality of vision. Twenty-four young adult myopes had baseline high and low-contrast VAs and refractions measured and quality of vision assessed by the Quality of Vision (QoV) questionnaire with single vision SCLs. Additional VA and QoV questionnaire data were collected immediately after subjects were fitted with Proclear MF SCLs and again after a 2-week adaptation period of daily lens wear. Data were collected for two MF SCL designs, incorporating +1.50 and +3.00 D peripheral near additions, with a week washout period allowed between the two lens trials. High- and low-contrast VAs were initially reduced with both MF SCL designs, but subsequently improved to be not significantly reduced in the case of high-contrast VA by the end of the 2-week adaptation period. The quality of vision was also reduced, more so with the +3.00 D MF SCL. Quality of Vision (QoV) scores describing frequency, severity and bothersome nature of visual symptoms indicated symptoms worsening rather than resolving over the 2-week period, particularly so with the +3.00 D MF SCL. Low and high add MF SCLs adversely affected vision on initial insertion, with sustained effects on low-contrast VA and QoV scores but not high-contrast VA. Thus, high-contrast VA is not a suitable surrogate for quality of vision. In prescribing MF SCLs for myopia control, clinicians should educate patients about these effects on vision. © 2016 Acta Ophthalmologica Scandinavica Foundation. Published by John Wiley & Sons Ltd.

Impact of nutrition interventions on pediatric mortality and nutrition outcomes in humanitarian emergencies: A systematic review.

PubMed

Balhara, Kamna S; Silvestri, David M; Tyler Winders, W; Selvam, Anand; Kivlehan, Sean M; Becker, Torben K; Levine, Adam C

2017-12-01

Malnutrition contributes to paediatric morbidity and mortality in disasters and complex emergencies, but summary data describing specific nutritional interventions in these settings are lacking. This systematic review aimed to characterise such interventions and their effects on paediatric mortality, anthropometric measures and serum markers of nutrition. A systematic search of OVID MEDLINE, Cochrane Library and relevant grey literature was conducted. We included all randomised controlled trials and observational controlled studies evaluating effectiveness of nutritional intervention(s) on defined health outcomes in children and adolescents (0-18 years) within a disaster or complex emergency. We extracted study characteristics, interventions and outcomes data. Study quality was assessed using Grading of Recommendations Assessment, Development and Evaluation (GRADE) criteria. A total of 31 studies met inclusion criteria. Most were conducted in Africa (17), during periods of conflict or hunger gaps (14), and evaluated micronutrient supplementation (14) or selective feeding (10). Overall study quality was low, with only two high and four moderate quality studies. High- and medium-quality studies demonstrated positive impact of fortified spreads, ready-to-use therapeutic foods, micronutrient supplementation, and food and cash transfers. In disasters and complex emergencies, high variability and low quality of controlled studies on paediatric malnutrition limit meaningful data aggregation. If existing research gaps are to be addressed, the inherent unpredictability of humanitarian emergencies and ethical considerations regarding controls may warrant a paradigm shift in what constitutes adequate methods. Periodic hunger gaps may offer a generalisable opportunity for robust trials, but consensus on meaningful nutritional endpoints is needed. © 2017 John Wiley & Sons Ltd.

Evaluation of High-Speed Civil Transport Handling Qualities Criteria with Supersonic Flight Data

NASA Technical Reports Server (NTRS)

Cox, Timothy H.; Jackson, Dante W.

1997-01-01

Most flying qualities criteria have been developed from data in the subsonic flight regime. Unique characteristics of supersonic flight raise questions about whether these criteria successfully extend into the supersonic flight regime. Approximately 25 years ago NASA Dryden Flight Research Center addressed this issue with handling qualities evaluations of the XB-70 and YF-12. Good correlations between some of the classical handling qualities parameters, such as the control anticipation parameter as a function of damping, were discovered. More criteria have been developed since these studies. Some of these more recent criteria are being used in designing the High-Speed Civil Transport (HSCT). A second research study recently addressed this issue through flying qualities evaluations of the SR-71 at Mach 3. The research goal was to extend the high-speed flying qualities experience of large airplanes and to evaluate more recent MIL-STD-1797 criteria against pilot comments and ratings. Emphasis was placed on evaluating the criteria used for designing the HSCT. XB-70 and YF-12 data from the previous research supplemented the SR-71 data. The results indicate that the criteria used in the HSCT design are conservative and should provide good flying qualities for typical high-speed maneuvering. Additional results show correlation between the ratings and comments and criteria for gradual maneuvering with precision control. Correlation is shown between ratings and comments and an extension of the Neal/Smith criterion using normal acceleration instead of pitch rate.

Quality-Assurance Data for Routine Water Analyses by the U.S. Geological Survey Laboratory in Troy, New York-July 1997 through June 1999

USGS Publications Warehouse

Lincoln, Tricia A.; Horan-Ross, Debra A.; McHale, Michael R.; Lawrence, Gregory B.

2006-01-01

The laboratory for analysis of low-ionic-strength water at the U.S. Geological Survey (USGS) Water Science Center in Troy, N.Y., analyzes samples collected by USGS projects throughout the Northeast. The laboratory's quality-assurance program is based on internal and interlaboratory quality-assurance samples and quality-control procedures that were developed to ensure proper sample collection, processing, and analysis. The quality-assurance/quality-control data for the time period addressed in this report were stored in the laboratory's SAS data-management system, which provides efficient review, compilation, and plotting of data. This report presents and discusses results of quality-assurance and quality- control samples analyzed from July 1997 through June 1999. Results for the quality-control samples for 18 analytical procedures were evaluated for bias and precision. Control charts indicate that data for eight of the analytical procedures were occasionally biased for either high-concentration and (or) low-concentration samples but were within control limits; these procedures were: acid-neutralizing capacity, total monomeric aluminum, total aluminum, ammonium, calcium, chloride, specific conductance, and sulfate. The data from the potassium and sodium analytical procedures are insufficient for evaluation. Results from the filter-blank and analytical-blank analyses indicate that the procedures for 11 of 13 analytes were within control limits, although the concentrations for blanks were occasionally outside the control limits. Blank analysis results for chloride showed that 22 percent of blanks did not meet data-quality objectives and results for dissolved organic carbon showed that 31 percent of the blanks did not meet data-quality objectives. Sampling and analysis precision are evaluated herein in terms of the coefficient of variation obtained for triplicate samples in the procedures for 14 of the 18 analytes. At least 90 percent of the samples met data-quality objectives for all analytes except total aluminum (70 percent of samples met objectives) and potassium (83 percent of samples met objectives). Results of the USGS interlaboratory Standard Reference Sample (SRS) Project indicated good data quality for most constituents over the time period. The P-sample (low-ionic-strength constituents) analysis had good ratings in two of these studies and a satisfactory rating in the third. The results of the T-sample (trace constituents) analysis indicated high data quality with good ratings in all three studies. The N-sample (nutrient constituents) studies had one each of excellent, good, and satisfactory ratings. Results of Environment Canada's National Water Research Institute (NWRI) program indicated that at least 80 percent of the samples met data-quality objectives for 9 of the 13 analytes; the exceptions were dissolved organic carbon, ammonium, chloride, and specific conductance. Data-quality objectives were not met for dissolved organic carbon in two NWRI studies, but all of the samples were within control limits for the last study. Data-quality objectives were not met in 41 percent of samples analyzed for ammonium, 25 percent of samples analyzed for chloride, and 30 percent of samples analyzed for specific conductance. Results from blind reference-sample analyses indicated that data-quality objectives were met by at least 84 percent of the samples analyzed for calcium, chloride, magnesium, pH, and potassium. Data-quality objectives were met by 73 percent of those analyzed for sulfate. The data-quality objective was not met for sodium. The data are insufficient for evaluation of the specific conductance results.

Fourth High Alpha Conference, volume 3

NASA Technical Reports Server (NTRS)

1994-01-01

Thie goal of this conference was to focus on the flight validation of high-angle-of-attack technologies and provide an in-depth review of the latest high-angle-of-attack activities. Areas covered include: (1) high-angle-of-attack aerodynamics; (2) propulsion and inlet dynamics; (3) thrust vectoring; (4) control laws and handling qualities; (5) tactical utility; and (6) forebody controls.

[Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

PubMed

Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

2017-12-01

The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

The relationship between the content and the form of metaphorical statements.

PubMed

Xu, Xu

2010-04-01

Recent research suggests that the quality of a metaphorical topic-vehicle pairing should be the determinant to the choice of a proper grammatical form, nominal metaphor versus simile. Two studies examined the relationship between the quality of the content of a metaphorical statement and its grammatical form. Study 1 showed that the two grammatical forms did not differ in aptness when the quality of topic-vehicle pairs and the conventionality of vehicles, a factor associated with the quality of metaphorical expressions, were controlled. With an online comprehension measure, Study 2 found that high quality metaphorical pairings were easier to process than low quality metaphorical pairings in both the metaphor form and the simile form. For high quality metaphorical pairings, information related to both the topics and the vehicles was highly activated at an early stage of processing. The relations among factors involved in the interpretive process of metaphorical language are discussed.

Disease management: a leap of faith to lower-cost, higher-quality health care.

PubMed

Short, Ashley; Mays, Glen; Mittler, Jessica

2003-10-01

With managed care's promise to reduce costs and improve quality waning, employers and health plans are exploring more targeted ways to control rapidly rising health costs. Disease management programs, which focus on patients with chronic conditions such as asthma and diabetes, are growing in popularity, according to findings from the Center for Studying Health System Change's (HSC) 2002-03 site visits to 12 nationally representative communities. In addition to condition-based disease management programs, some health plans and employers are using intensive case management services to coordinate care for high-risk patients with potentially costly and complex medical conditions. Despite high expectations, evidence of both disease management and case management programs' success in controlling costs and improving quality remains limited.

QCloud: A cloud-based quality control system for mass spectrometry-based proteomics laboratories

PubMed Central

Chiva, Cristina; Olivella, Roger; Borràs, Eva; Espadas, Guadalupe; Pastor, Olga; Solé, Amanda

2018-01-01

The increasing number of biomedical and translational applications in mass spectrometry-based proteomics poses new analytical challenges and raises the need for automated quality control systems. Despite previous efforts to set standard file formats, data processing workflows and key evaluation parameters for quality control, automated quality control systems are not yet widespread among proteomics laboratories, which limits the acquisition of high-quality results, inter-laboratory comparisons and the assessment of variability of instrumental platforms. Here we present QCloud, a cloud-based system to support proteomics laboratories in daily quality assessment using a user-friendly interface, easy setup, automated data processing and archiving, and unbiased instrument evaluation. QCloud supports the most common targeted and untargeted proteomics workflows, it accepts data formats from different vendors and it enables the annotation of acquired data and reporting incidences. A complete version of the QCloud system has successfully been developed and it is now open to the proteomics community (http://qcloud.crg.eu). QCloud system is an open source project, publicly available under a Creative Commons License Attribution-ShareAlike 4.0. PMID:29324744

Quality Assurance and Control Considerations in Environmental Measurements and Monitoring

NASA Astrophysics Data System (ADS)

Sedlet, Jacob

1982-06-01

Quality assurance and quality control have become accepted as essential parts of all environmental surveillance, measurements, and monitoring programs, both nuclear and non-nuclear. The same principles and details apply to each. It is primarily the final measurement technique that differs. As the desire and need to measure smaller amounts of pollutants with greater accuracy has increased, it has been recognized that quality assurance and control programs are cost-effective in achieving the expected results. Quality assurance (QA) consists of all the actions necessary to provide confidence in the results. Quality control (QC) is a part of QA, and consists of those actions and activities that permit the control of the individual steps in the environmental program. The distinction between the two terms is not always clearly defined, but a sharp division is not necessary. The essential principle of QA and QC is a commitment to high quality results. The essential components of a QA and QC program are a complete, written procedures manual for all parts of the environmental program, the use of standard or validated procedures, participation in applicable interlaboratory comparison or QA programs, replicate analysis and measurement, training of personnel, and a means of auditing or checking that the QA and QC programs are properly conducted. These components are discussed below in some detail.

X-31 high angle of attack control system performance

NASA Technical Reports Server (NTRS)

Huber, Peter; Seamount, Patricia

1994-01-01

The design goals for the X-31 flight control system were: (1) level 1 handling qualities during post-stall maneuvering (30 to 70 degrees angle-of-attack); (2) thrust vectoring to enhance performance across the flight envelope; and (3) adequate pitch-down authority at high angle-of-attack. Additional performance goals are discussed. A description of the flight control system is presented, highlighting flight control system features in the pitch and roll axes and X-31 thrust vectoring characteristics. The high angle-of-attack envelope clearance approach will be described, including a brief explanation of analysis techniques and tools. Also, problems encountered during envelope expansion will be discussed. This presentation emphasizes control system solutions to problems encountered in envelope expansion. An essentially 'care free' envelope was cleared for the close-in-combat demonstrator phase. High angle-of-attack flying qualities maneuvers are currently being flown and evaluated. These results are compared with pilot opinions expressed during the close-in-combat program and with results obtained from the F-18 HARV for identical maneuvers. The status and preliminary results of these tests are discussed.

Performance evaluation of traffic sensing and control devices : [technical summary].

DOT National Transportation Integrated Search

2011-01-01

High quality sensing and control systems are essential for providing efficient signalized arterial operations. INDOT operates over 2600 traffic signal controllers, approximately 2000 of which use some form of vehicle detection. The private sector con...

[Establishment of Quality Control System of Nucleic Acid Detection for Ebola Virus in Sierra Leone-China Friendship Biological Safety Laboratory].

PubMed

Wang, Qin; Zhang, Yong; Nie, Kai; Wang, Huanyu; Du, Haijun; Song, Jingdong; Xiao, Kang; Lei, Wenwen; Guo, Jianqiang; Wei, Hejiang; Cai, Kun; Wang, Yanhai; Wu, Jiang; Gerald, Bangura; Kamara, Idrissa Laybohr; Liang, Mifang; Wu, Guizhen; Dong, Xiaoping

2016-03-01

The quality control process throughout the Ebola virus nucleic acid detection in Sierra Leone-China Friendship Biological Safety Laboratory (SLE-CHN Biosafety Lab) was described in detail, in order to comprehensively display the scientific, rigorous, accurate and efficient practice in detection of Ebola virus of first batch detection team in SLE-CHN Biosafety Lab. Firstly, the key points of laboratory quality control system was described, including the managements and organizing, quality control documents and information management, instrument, reagents and supplies, assessment, facilities design and space allocation, laboratory maintenance and biosecurity. Secondly, the application of quality control methods in the whole process of the Ebola virus detection, including before the test, during the test and after the test, was analyzed. The excellent and professional laboratory staffs, the implementation of humanized management are the cornerstone of the success; High-level biological safety protection is the premise for effective quality control and completion of Ebola virus detection tasks. And professional logistics is prerequisite for launching the laboratory diagnosis of Ebola virus. The establishment and running of SLE-CHN Biosafety Lab has landmark significance for the friendship between Sierra Leone and China, and the lab becomes the most important base for Ebola virus laboratory testing in Sierra Leone.

ECG compression using non-recursive wavelet transform with quality control

NASA Astrophysics Data System (ADS)

Liu, Je-Hung; Hung, King-Chu; Wu, Tsung-Ching

2016-09-01

While wavelet-based electrocardiogram (ECG) data compression using scalar quantisation (SQ) yields excellent compression performance, a wavelet's SQ scheme, however, must select a set of multilevel quantisers for each quantisation process. As a result of the properties of multiple-to-one mapping, however, this scheme is not conducive for reconstruction error control. In order to address this problem, this paper presents a single-variable control SQ scheme able to guarantee the reconstruction quality of wavelet-based ECG data compression. Based on the reversible round-off non-recursive discrete periodised wavelet transform (RRO-NRDPWT), the SQ scheme is derived with a three-stage design process that first uses genetic algorithm (GA) for high compression ratio (CR), followed by a quadratic curve fitting for linear distortion control, and the third uses a fuzzy decision-making for minimising data dependency effect and selecting the optimal SQ. The two databases, Physikalisch-Technische Bundesanstalt (PTB) and Massachusetts Institute of Technology (MIT) arrhythmia, are used to evaluate quality control performance. Experimental results show that the design method guarantees a high compression performance SQ scheme with statistically linear distortion. This property can be independent of training data and can facilitate rapid error control.

Delay Discounting Mediates Parent-Adolescent Relationship Quality and Risky Sexual Behavior for Low Self-Control Adolescents

PubMed Central

Kahn, Rachel E.; Holmes, Christopher; Farley, Julee P.; Kim-Spoon, Jungmeen

2015-01-01

Parent-adolescent relationship quality and delay discounting may play important roles in adolescents’ sexual decision making processes, and levels of self-control during adolescence could act as a buffer within these factors. This longitudinal study included 219 adolescent (55% male; mean age = 12.66 years at Wave 1; mean age = 15.10 years at Wave 2) and primary caregiver dyads. Structural equation modeling was utilized to determine whether delay discounting mediated the association between parent-adolescent relationship quality and adolescents’ risky sexual behavior and how this mediated association may differ between those with high versus low self-control. The results revealed parent-adolescent relationship quality plays a role in the development of risky sexual behavior indirectly through levels of delay discounting, but only for adolescents with low self-control. These findings could inform sex education policies and health prevention programs that address adolescent risky sexual behavior. PMID:26202153

High Dynamic Imaging for Photometry and Graphic Arts Evaluation

NASA Astrophysics Data System (ADS)

T. S., Sudheer Kumar; Kurian, Ciji Pearl; Shama, Kumara; K. R., Shailesh

2018-05-01

High Dynamic Range Imaging (HDRI) techniques for luminance measurement is gaining importance in recent years. This paper presents the application of the HDRI system for obtaining the photometric characteristics of lighting fixtures as well to assess the quality of lighting in colour viewing booth of a printing press. The process of quality control of prints in a printing press is known as graphic arts evaluation. This light booth plays a major role in the quality control of prints. In this work, Nikon D5100 camera was used to obtain the photometric characteristics of narrow beam spotlight. The results of this experiment are in agreement with photometric characteristics obtained from a standard industry grade Gonio-photometer. Similarly, Canon 60D camera was used to assess the quality of spatial luminance distribution of light in the colour viewing booth. This work demonstrates the usefulness of HDRI technology for photometric measurements and luminance distributions of illuminated interiors.

Identification of quality markers of Yuanhu Zhitong tablets based on integrative pharmacology and data mining.

PubMed

Li, Ke; Li, Junfang; Su, Jin; Xiao, Xuefeng; Peng, Xiujuan; Liu, Feng; Li, Defeng; Zhang, Yi; Chong, Tao; Xu, Haiyu; Liu, Changxiao; Yang, Hongjun

2018-03-07

The quality evaluation of traditional Chinese medicine (TCM) formulations is needed to guarantee the safety and efficacy. In our laboratory, we established interaction rules between chemical quality control and biological activity evaluations to study Yuanhu Zhitong tablets (YZTs). Moreover, a quality marker (Q-marker) has recently been proposed as a new concept in the quality control of TCM. However, no appropriate methods are available for the identification of Q-markers from the complex TCM systems. We aimed to use an integrative pharmacological (IP) approach to further identify Q-markers from YZTs through the integration of multidisciplinary knowledge. In addition, data mining was used to determine the correlation between multiple constituents of this TCM and its bioactivity to improve quality control. The IP approach was used to identify the active constituents of YZTs and elucidate the molecular mechanisms by integrating chemical and biosynthetic analyses, drug metabolism, and network pharmacology. Data mining methods including grey relational analysis (GRA) and least squares support vector machine (LS-SVM) regression techniques, were used to establish the correlations among the constituents and efficacy, and dose efficacy in multiple dimensions. Seven constituents (tetrahydropalmatine, α-allocryptopine, protopine, corydaline, imperatorin, isoimperatorin, and byakangelicin) were identified as Q-markers of YZT using IP based on their high abundance, specific presence in the individual herbal constituents and the product, appropriate drug-like properties, and critical contribution to the bioactivity of the mixture of YZT constituents. Moreover, three Q-markers (protopine, α-allocryptopine, and corydaline) were highly correlated with the multiple bioactivities of the YZTs, as found using data mining. Finally, three constituents (tetrahydropalmatine, corydaline, and imperatorin) were chosen as minimum combinations that both distinguished the authentic components from false products and indicated the intensity of bioactivity to improve the quality control of YZTs. Tetrahydropalmatine, imperatorin, and corydaline could be used as minimum combinations to effectively control the quality of YZTs. Copyright © 2018. Published by Elsevier GmbH.

Quality control tests of lab-reared Cydia pomonella and Cactoblastis cactorum field performance: Comparison of laboratory and field bioassays.

USDA-ARS?s Scientific Manuscript database

Research, operational, and commercial programs which rely on mass-reared insects of high quality and performance, need accurate methods for monitoring quality degradation during each step of production, handling and release. With continued interest in the use of the sterile insect technique (SIT) a...

Quality Market: Design and Field Study of Prediction Market for Software Quality Control

ERIC Educational Resources Information Center

Krishnamurthy, Janaki

2010-01-01

Given the increasing competition in the software industry and the critical consequences of software errors, it has become important for companies to achieve high levels of software quality. While cost reduction and timeliness of projects continue to be important measures, software companies are placing increasing attention on identifying the user…

[Evaluation of quality of HIV diagnostic procedures in Poland].

PubMed

Parczewski, Miłosz; Madaliński, Kazimierz; Leszczyszyn-Pynka, Magdalena; Boroń-Kaczmarska, Anna

2010-01-01

The aim of this work was quality assessment of HIV diagnostic procedures in Poland, including human and technical resources as well as laboratory practice. Sixty questionnaires were distributed among diagnostic centers to obtain qualitative data. Basing on the survey data serological control using coded panels of HIV-1/2 samples was performed. Thirty-one filled questionnaires were received (50.8%). Surveyed laboratories perform from 350 to 5500 serological screening tests per year. In most of laboratories fourth generation assays are available, while Blood Donation Centers screen the blood both with serological assays and by HIV-RNA detection. Sanitary and Epidemiological Stations and academic laboratories hold the ISO/IEC 17025 or IS0 9001:2001 accreditation, five of the surveyed centers participate in Labquality assurance and two in Quality Control in Molecular Diagnostics programs. Data of control serological testing were received from 21 centers. In the quality control assessment 194 analyses were performed with 91 true negative, 2 false negative, 96 true positive and 5 false positive results. False negative rate of % and false positive rate of 5.2% was noted for this study. Currently, virtually no guidelines related to the HIV-diagnostics quality assurance and control in Poland are in delineated. Development of the national unified quality control system, basing on the central institution is highly desirable. National certification within the frames of the quality control and assurance program should be mandatory for all the diagnostic labs, and aim at improvement of reliability of the result distributed among clinicians and patients.

The vaccines consistency approach project: an EPAA initiative.

PubMed

De Mattia, F; Hendriksen, C; Buchheit, K H; Chapsal, J M; Halder, M; Lambrigts, D; Redhead, K; Rommel, E; Scharton-Kersten, T; Sesardic, T; Viviani, L; Ragan, I

2015-01-01

The consistency approach for release testing of established vaccines promotes the use of in vitro, analytical, non-animal based systems allowing the monitoring of quality parameters during the whole production process. By using highly sensitive non-animal methods, the consistency approach has the potential to improve the quality of testing and to foster the 3Rs (replacement, refinement and reduction of animal use) for quality control of established vaccines. This concept offers an alternative to the current quality control strategy which often requires large numbers of laboratory animals. In order to facilitate the introduction of the consistency approach for established human and veterinary vaccine quality control, the European Partnership for Alternatives to Animal Testing (EPAA) initiated a project, the "Vaccines Consistency Approach Project", aiming at developing and validating the consistency approach with stakeholders from academia, regulators, OMCLs, EDQM, European Commission and industry. This report summarises progress since the project's inception.

Human Connectome Project Informatics: quality control, database services, and data visualization

PubMed Central

Marcus, Daniel S.; Harms, Michael P.; Snyder, Abraham Z.; Jenkinson, Mark; Wilson, J Anthony; Glasser, Matthew F.; Barch, Deanna M.; Archie, Kevin A.; Burgess, Gregory C.; Ramaratnam, Mohana; Hodge, Michael; Horton, William; Herrick, Rick; Olsen, Timothy; McKay, Michael; House, Matthew; Hileman, Michael; Reid, Erin; Harwell, John; Coalson, Timothy; Schindler, Jon; Elam, Jennifer S.; Curtiss, Sandra W.; Van Essen, David C.

2013-01-01

The Human Connectome Project (HCP) has developed protocols, standard operating and quality control procedures, and a suite of informatics tools to enable high throughput data collection, data sharing, automated data processing and analysis, and data mining and visualization. Quality control procedures include methods to maintain data collection consistency over time, to measure head motion, and to establish quantitative modality-specific overall quality assessments. Database services developed as customizations of the XNAT imaging informatics platform support both internal daily operations and open access data sharing. The Connectome Workbench visualization environment enables user interaction with HCP data and is increasingly integrated with the HCP's database services. Here we describe the current state of these procedures and tools and their application in the ongoing HCP study. PMID:23707591

Power quality improvement by using STATCOM control scheme in wind energy generation interface to grid

NASA Astrophysics Data System (ADS)

Kirmani, Sheeraz; Kumar, Brijesh

2018-01-01

“Electric Power Quality (EPQ) is a term that refers to maintaining the near sinusoidal waveform of power distribution bus voltages and currents at rated magnitude and frequency”. Today customers are more aware of the seriousness that the power quality possesses, this prompt the utilities to assure good quality of power to their customer. The power quality is basically customer centric. Increased focus of utilities toward maintaining reliable power supply by employing power quality improvement tools has reduced the power outages and black out considerably. Good power quality is the characteristic of reliable power supply. Low power factor, harmonic pollution, load imbalance, fast voltage variations are some common parameters which are used to define the power quality. If the power quality issues are not checked i.e. the parameters that define power quality doesn't fall within the predefined standards than it will lead into high electricity bill, high running cost in industries, malfunctioning of equipments, challenges in connecting renewable. Capacitor banks, FACTS devices, harmonic filters, SVC’s (static voltage compensators), STATCOM (Static-Compensator) are the solutions to achieve the power quality. The performance of Wind turbine generators is affected by poor quality power, at the same time these wind power generating plant affects the power quality negatively. This paper presents the STATCOM-BESS (battery energy storage system) system and studies its impact on the power quality in a system which consists of wind turbine generator, non linear load, hysteresis controller for controlling the operation of STATCOM and grid. The model is simulated in the MATLAB/Simulink. This scheme mitigates the power quality issues, improves voltage profile and also reduces harmonic distortion of the waveforms. BESS level out the imbalances caused in real power due to intermittent nature of wind power available due to varying wind speeds.

Statistical quality control through overall vibration analysis

NASA Astrophysics Data System (ADS)

Carnero, M. ^a. Carmen; González-Palma, Rafael; Almorza, David; Mayorga, Pedro; López-Escobar, Carlos

2010-05-01

The present study introduces the concept of statistical quality control in automotive wheel bearings manufacturing processes. Defects on products under analysis can have a direct influence on passengers' safety and comfort. At present, the use of vibration analysis on machine tools for quality control purposes is not very extensive in manufacturing facilities. Noise and vibration are common quality problems in bearings. These failure modes likely occur under certain operating conditions and do not require high vibration amplitudes but relate to certain vibration frequencies. The vibration frequencies are affected by the type of surface problems (chattering) of ball races that are generated through grinding processes. The purpose of this paper is to identify grinding process variables that affect the quality of bearings by using statistical principles in the field of machine tools. In addition, an evaluation of the quality results of the finished parts under different combinations of process variables is assessed. This paper intends to establish the foundations to predict the quality of the products through the analysis of self-induced vibrations during the contact between the grinding wheel and the parts. To achieve this goal, the overall self-induced vibration readings under different combinations of process variables are analysed using statistical tools. The analysis of data and design of experiments follows a classical approach, considering all potential interactions between variables. The analysis of data is conducted through analysis of variance (ANOVA) for data sets that meet normality and homoscedasticity criteria. This paper utilizes different statistical tools to support the conclusions such as chi squared, Shapiro-Wilks, symmetry, Kurtosis, Cochran, Hartlett, and Hartley and Krushal-Wallis. The analysis presented is the starting point to extend the use of predictive techniques (vibration analysis) for quality control. This paper demonstrates the existence of predictive variables (high-frequency vibration displacements) that are sensible to the processes setup and the quality of the products obtained. Based on the result of this overall vibration analysis, a second paper will analyse self-induced vibration spectrums in order to define limit vibration bands, controllable every cycle or connected to permanent vibration-monitoring systems able to adjust sensible process variables identified by ANOVA, once the vibration readings exceed established quality limits.

Social Relationships in Young Adults at Ultra High Risk For Psychosis

PubMed Central

Robustelli, Briana L.; Newberry, Raeana E.; Whisman, Mark A.; Mittal, Vijay A.

2016-01-01

Studies suggest that individuals with schizophrenia have smaller social networks and less satisfying relationships. However, much is still unknown about the typical quantity and quality of social relationships in young adults during the ultra high-risk (UHR) period. Investigating these relationships holds significant importance for improving understanding of etiological processes, mapping the social environment, and highlighting treatment targets in a critical period. A total of 85 participants (44 UHR and 41 healthy controls) completed measures examining the participants’ social relationships, social support, and loneliness. Mean differences between the UHR and healthy control participants and associations between social relationships and symptoms and functioning were examined. Results indicated significant differences between groups on several indices. Specifically, the UHR youth reported fewer close friends, less diverse social networks, less perceived social support, poorer relationship quality with family and friends, and more loneliness. Notably, within the UHR group, being lonely and having fewer and worse quality relationships was associated with greater symptom severity and lower overall functioning. This study suggests that youth at high-risk of developing psychosis have fewer and poorer quality social relationships. Interventions that focus on increasing the quantity and quality of young adults’ social networks may be beneficial for this population. PMID:27987484

Electron-beam lithography with character projection technique for high-throughput exposure with line-edge quality control

NASA Astrophysics Data System (ADS)

Ikeno, Rimon; Maruyama, Satoshi; Mita, Yoshio; Ikeda, Makoto; Asada, Kunihiro

2016-07-01

The high throughput of character projection (CP) electron-beam (EB) lithography makes it a promising technique for low-to-medium volume device fabrication with regularly arranged layouts, such as for standard-cell logics and memory arrays. However, non-VLSI applications such as MEMS and MOEMS may not be able to fully utilize the benefits of the CP method due to the wide variety of layout figures including curved and oblique edges. In addition, the stepwise shapes that appear because of the EB exposure process often result in intolerable edge roughness, which degrades device performances. In this study, we propose a general EB lithography methodology for such applications utilizing a combination of the CP and variable-shaped beam methods. In the process of layout data conversion with CP character instantiation, several control parameters were optimized to minimize the shot count, improve the edge quality, and enhance the overall device performance. We have demonstrated EB shot reduction and edge-quality improvement with our methodology by using a leading-edge EB exposure tool, ADVANTEST F7000S-VD02, and a high-resolution hydrogen silsesquioxane resist. Atomic force microscope observations were used to analyze the resist edge profiles' quality to determine the influence of the control parameters used in the data conversion process.

Drinking water: a risk factor for high incidence of esophageal cancer in Anyang, China.

PubMed

Cao, Wenbo; Han, Jianying; Yuan, Yi; Xu, Zhixiang; Yang, Shengli; He, Weixin

2016-06-01

Anyang is known to be a high-incidence area of esophageal cancer (EC) in China. Among a long list of risk factors, the quality of drinking water was evaluated. We have selected 3806 individuals and collected 550 drinking water samples correspondent with this not-matched case-control survey. There are 531 EC patients included based on Population Cancer Registry from 92 townships, of which 3275 controls with long-lived aged over 90 years and free from EC are used as controls in the same regions. Our result suggests that the quality of drinking water is a highly associated risk factor for EC. The residential ecological environment and the quality of water resource positively link with each other. The analysis of water samples also demonstrated that the concentrations of methyl ethylamine, morpholine, N-methylbenzylamine, nitrate and chloride in water from springs and rivers are higher than those in well and tap water (P = 0.001). Micronuclei formation tests show that well water and tap water in these regions have no mutagenicity.

Cancer control in developing countries: using health data and health services research to measure and improve access, quality and efficiency

PubMed Central

2010-01-01

Background Cancer is a rapidly increasing problem in developing countries. Access, quality and efficiency of cancer services in developing countries must be understood to advance effective cancer control programs. Health services research can provide insights into these areas. Discussion This article provides an overview of oncology health services in developing countries. We use selected examples from peer-reviewed literature in health services research and relevant publicly available documents. In spite of significant limitations in the available data, it is clear there are substantial barriers to access to cancer control in developing countries. This includes prevention, early detection, diagnosis/treatment and palliation. There are also substantial limitations in the quality of cancer control and a great need to improve economic efficiency. We describe how the application of health data may assist in optimizing (1) Structure: strengthening planning, collaboration, transparency, research development, education and capacity building. (2) Process: enabling follow-up, knowledge translation, patient safety and quality assurance. (3) Outcome: facilitating evaluation, monitoring and improvement of national cancer control efforts. There is currently limited data and capacity to use this data in developing countries for these purposes. Summary There is an urgent need to improve health services for cancer control in developing countries. Current resources and much-needed investments must be optimally managed. To achieve this, we would recommend investment in four key priorities: (1) Capacity building in oncology health services research, policy and planning relevant to developing countries. (2) Development of high-quality health data sources. (3) More oncology-related economic evaluations in developing countries. (4) Exploration of high-quality models of cancer control in developing countries. Meeting these needs will require national, regional and international collaboration as well as political leadership. Horizontal integration with programs for other diseases will be important. PMID:20942937

Controllable Edge Oxidation and Bubbling Exfoliation Enable the Fabrication of High Quality Water Dispersible Graphene

PubMed Central

Tian, Suyun; Sun, Jing; Yang, Siwei; He, Peng; Wang, Gang; Di, Zengfeng; Ding, Guqiao; Xie, Xiaoming; Jiang, Mianheng

2016-01-01

Despite significant progresses made on mass production of chemically exfoliated graphene, the quality, cost and environmental friendliness remain major challenges for its market penetration. Here, we present a fast and green exfoliation strategy for large scale production of high quality water dispersible few layer graphene through a controllable edge oxidation and localized gas bubbling process. Mild edge oxidation guarantees that the pristine sp2 lattice is largely intact and the edges are functionalized with hydrophilic groups, giving rise to high conductivity and good water dispersibility at the same time. The aqueous concentration can be as high as 5.0 mg mL−1, which is an order of magnitude higher than previously reports. The water soluble graphene can be directly spray-coated on various substrates, and the back-gated field effect transistor give hole and electron mobility of ~496 and ~676 cm2 V−1 s−1, respectively. These results achieved are expected to expedite various applications of graphene. PMID:27666869

Controllable Edge Oxidation and Bubbling Exfoliation Enable the Fabrication of High Quality Water Dispersible Graphene.

PubMed

Tian, Suyun; Sun, Jing; Yang, Siwei; He, Peng; Wang, Gang; Di, Zengfeng; Ding, Guqiao; Xie, Xiaoming; Jiang, Mianheng

2016-09-26

Despite significant progresses made on mass production of chemically exfoliated graphene, the quality, cost and environmental friendliness remain major challenges for its market penetration. Here, we present a fast and green exfoliation strategy for large scale production of high quality water dispersible few layer graphene through a controllable edge oxidation and localized gas bubbling process. Mild edge oxidation guarantees that the pristine sp 2 lattice is largely intact and the edges are functionalized with hydrophilic groups, giving rise to high conductivity and good water dispersibility at the same time. The aqueous concentration can be as high as 5.0 mg mL -1 , which is an order of magnitude higher than previously reports. The water soluble graphene can be directly spray-coated on various substrates, and the back-gated field effect transistor give hole and electron mobility of ~496 and ~676 cm 2 V -1 s -1 , respectively. These results achieved are expected to expedite various applications of graphene.

Controlled fabrication of high-quality carbon nanoscrolls from monolayer graphene.

PubMed

Xie, Xu; Ju, Long; Feng, Xiaofeng; Sun, Yinghui; Zhou, Ruifeng; Liu, Kai; Fan, Shoushan; Li, Qunqing; Jiang, Kaili

2009-07-01

We report a simple and effective way of fabricating high-quality carbon nanoscrolls (CNSs), using isopropyl alcohol solution to roll up monolayer graphene predefined on SiO(2)/Si substrates. Transmission electron microscopy studies reveal that the CNS has a tube-like structure with a hollow core surrounded by graphene walls 0.35 nm apart. Raman spectroscopy studies show that the CNS is free of significant defects, and the electronic structure and phonon dispersion are slightly different from those of two-dimensional graphene. Finally, the CNS-based device is fabricated, directly on the SiO(2)/Si substrate. Electrical-transport measurements show that its resistance is weakly gate-dependent but strongly temperature-dependent. In addition, the CNS can sustain a high current density up to 5 x 10(7) A/cm(2), indicating that it is a good candidate for microcircuit interconnects. The controlled fabrication of high-quality CNSs may open up new opportunities for both fundamental and applied research of CNSs.

Controllable Edge Oxidation and Bubbling Exfoliation Enable the Fabrication of High Quality Water Dispersible Graphene

NASA Astrophysics Data System (ADS)

Tian, Suyun; Sun, Jing; Yang, Siwei; He, Peng; Wang, Gang; di, Zengfeng; Ding, Guqiao; Xie, Xiaoming; Jiang, Mianheng

2016-09-01

Despite significant progresses made on mass production of chemically exfoliated graphene, the quality, cost and environmental friendliness remain major challenges for its market penetration. Here, we present a fast and green exfoliation strategy for large scale production of high quality water dispersible few layer graphene through a controllable edge oxidation and localized gas bubbling process. Mild edge oxidation guarantees that the pristine sp2 lattice is largely intact and the edges are functionalized with hydrophilic groups, giving rise to high conductivity and good water dispersibility at the same time. The aqueous concentration can be as high as 5.0 mg mL-1, which is an order of magnitude higher than previously reports. The water soluble graphene can be directly spray-coated on various substrates, and the back-gated field effect transistor give hole and electron mobility of ~496 and ~676 cm2 V-1 s-1, respectively. These results achieved are expected to expedite various applications of graphene.

In-situ quality monitoring during laser brazing

NASA Astrophysics Data System (ADS)

Ungers, Michael; Fecker, Daniel; Frank, Sascha; Donst, Dmitri; Märgner, Volker; Abels, Peter; Kaierle, Stefan

Laser brazing of zinc coated steel is a widely established manufacturing process in the automotive sector, where high quality requirements must be fulfilled. The strength, impermeablitiy and surface appearance of the joint are particularly important for judging its quality. The development of an on-line quality control system is highly desired by the industry. This paper presents recent works on the development of such a system, which consists of two cameras operating in different spectral ranges. For the evaluation of the system, seam imperfections are created artificially during experiments. Finally image processing algorithms for monitoring process parameters based the captured images are presented.

On-line welding quality inspection system for steel pipe based on machine vision

NASA Astrophysics Data System (ADS)

Yang, Yang

2017-05-01

In recent years, high frequency welding has been widely used in production because of its advantages of simplicity, reliability and high quality. In the production process, how to effectively control the weld penetration welding, ensure full penetration, weld uniform, so as to ensure the welding quality is to solve the problem of the present stage, it is an important research field in the field of welding technology. In this paper, based on the study of some methods of welding inspection, a set of on-line welding quality inspection system based on machine vision is designed.

Quantifying the effect of air quality control measures during the 2010 Commonwealth Games at Delhi, India

NASA Astrophysics Data System (ADS)

Beig, Gufran; Chate, Dilip M.; Ghude, Sachin. D.; Mahajan, A. S.; Srinivas, R.; Ali, K.; Sahu, S. K.; Parkhi, N.; Surendran, D.; Trimbake, H. R.

2013-12-01

In 2010, the XIX Commonwealth Games (CWG-2010) were held in India for the first time at Delhi and involved 71 commonwealth nations and dependencies with more than 6000 athletes participating in 272 events. This was the largest international multi-sport event to be staged in India and strict emission controls were imposed during the games in order to ensure improved air quality for the participating athletes as a significant portion of the population in Delhi is regularly exposed to elevated levels of pollution. The air quality control measures ranged from vehicular and traffic controls to relocation of factories and reduction of power plant emissions. In order to understand the effects of these policy induced control measures, a network of air quality and weather monitoring stations was set-up across different areas in Delhi under the Government of India's System of Air quality Forecasting And Research (SAFAR) project. Simultaneous measurements of aerosols, reactive trace gases (e.g. NOx, O3, CO) and meteorological parameters were made before, during and after CWG-2010. Contrary to expectations, the emission controls implemented were not sufficient to reduce the pollutants, instead in some cases, causing an increase. The measured pollutants regularly exceeded the National Ambient Air Quality limits over the games period. The reasons for this increase are attributed to an underestimation of the required control measures, which resulted in inadequate planning. The results indicate that any future air quality control measures need to be well planned and strictly imposed in order to improve the air quality in Delhi, which affects a large population and is deteriorating rapidly. Thus, the presence of systematic high resolution data and realistic emission inventories through networks such as SAFAR will be directly useful for the future.

Goals and strategies in the global control design of the OAJ Robotic Observatory

NASA Astrophysics Data System (ADS)

Yanes-Díaz, A.; Rueda-Teruel, S.; Antón, J. L.; Rueda-Teruel, F.; Moles, M.; Cenarro, A. J.; Marín-Franch, A.; Ederoclite, A.; Gruel, N.; Varela, J.; Cristóbal-Hornillos, D.; Chueca, S.; Díaz-Martín, M. C.; Guillén, L.; Luis-Simoes, R.; Maícas, N.; Lamadrid, J. L.; López-Sainz, A.; Hernández-Fuertes, J.; Valdivielso, L.; Mendes de Oliveira, C.; Penteado, P.; Schoenell, W.; Kanaan, A.

2012-09-01

There are many ways to solve the challenging problem of making a high performance robotic observatory from scratch. The Observatorio Astrofísico de Javalambre (OAJ) is a new astronomical facility located in the Sierra de Javalambre (Teruel, Spain) whose primary role will be to conduct all-sky astronomical surveys. The OAJ control system has been designed from a global point of view including astronomical subsystems as well as infrastructures and other facilities. Three main factors have been considered in the design of a global control system for the robotic OAJ: quality, reliability and efficiency. We propose CIA (Control Integrated Architecture) design and OEE (Overall Equipment Effectiveness) as a key performance indicator in order to improve operation processes, minimizing resources and obtaining high cost reduction whilst maintaining quality requirements. The OAJ subsystems considered for the control integrated architecture are the following: two wide-field telescopes and their instrumentation, active optics subsystems, facilities for sky quality monitoring (seeing, extinction, sky background, sky brightness, cloud distribution, meteorological station), domes and several infrastructure facilities such as water supply, glycol water, water treatment plant, air conditioning, compressed air, LN2 plant, illumination, surveillance, access control, fire suppression, electrical generators, electrical distribution, electrical consumption, communication network, Uninterruptible Power Supply and two main control rooms, one at the OAJ and the other remotely located in Teruel, 40km from the observatory, connected through a microwave radio-link. This paper presents the OAJ strategy in control design to achieve maximum quality efficiency for the observatory processes and operations, giving practical examples of our approach.

Report: Quality Control Review of EPA OIG Reports Issued in Fiscal Year 2015

EPA Pesticide Factsheets

Report #16-N-0223, July 18, 2016. OIG reports issued in FY 2015 demonstrated high levels of compliance with OIG quality assurance procedures, and received average compliance scores of 90 percent or greater.

Not merely a question of self-control: The longitudinal effects of overeating behaviors, diet quality and physical activity on dieters' perceived diet success.

PubMed

Keller, Carmen; Hartmann, Christina

2016-12-01

This longitudinal study was conducted between 2010 (T1) and 2014 (T2) on a random sample from the general Swiss population (N = 2781, 46% male). Results showed that dieters (restrained eaters) who reported lack of success in T2 were overweight in T1, had higher levels of emotional and external eating, overeating, and ambivalence toward eating palatable food in T1, and a significantly increased body mass index (BMI) in the period between T1 and T2. Dieters who reported success in T2 had maintained a normal BMI between T1 and T2, had a higher diet quality in T1 and had maintained regular physical activity for at least one year before T2. The logistic regression revealed that high levels of dispositional self-control provided the most important predictor of being a successful dieter. When controlling for dispositional self-control, high levels of emotional eating, overeating, and ambivalence in T1, together with increases in these levels between T1 and T2, were associated with a decreased likelihood of being a successful dieter in T2. High levels of diet quality in T1 and the maintenance of regular physical activity were associated with an increased likelihood of being a successful dieter in T2. Results suggest that diet success and failure is a long-term phenomenon, partly but not fully explained by dispositional self-control. Independent of self-control persistent patterns of overeating due to emotional eating and ambivalent feelings toward eating palatable food, also explain long-term diet failure. A high diet quality and maintenance of regular physical activity accounted for dieters' long-term success. This is the first study that examined the long-term psychological and behavioral characteristics of successful and unsuccessful restrained eaters. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development and expansion of high-quality control region databases to improve forensic mtDNA evidence interpretation.

PubMed

Irwin, Jodi A; Saunier, Jessica L; Strouss, Katharine M; Sturk, Kimberly A; Diegoli, Toni M; Just, Rebecca S; Coble, Michael D; Parson, Walther; Parsons, Thomas J

2007-06-01

In an effort to increase the quantity, breadth and availability of mtDNA databases suitable for forensic comparisons, we have developed a high-throughput process to generate approximately 5000 control region sequences per year from regional US populations, global populations from which the current US population is derived and global populations currently under-represented in available forensic databases. The system utilizes robotic instrumentation for all laboratory steps from pre-extraction through sequence detection, and a rigorous eight-step, multi-laboratory data review process with entirely electronic data transfer. Over the past 3 years, nearly 10,000 control region sequences have been generated using this approach. These data are being made publicly available and should further address the need for consistent, high-quality mtDNA databases for forensic testing.

Vision-based real-time position control of a semi-automated system for robot-assisted joint fracture surgery.

PubMed

Dagnino, Giulio; Georgilas, Ioannis; Tarassoli, Payam; Atkins, Roger; Dogramadzi, Sanja

2016-03-01

Joint fracture surgery quality can be improved by robotic system with high-accuracy and high-repeatability fracture fragment manipulation. A new real-time vision-based system for fragment manipulation during robot-assisted fracture surgery was developed and tested. The control strategy was accomplished by merging fast open-loop control with vision-based control. This two-phase process is designed to eliminate the open-loop positioning errors by closing the control loop using visual feedback provided by an optical tracking system. Evaluation of the control system accuracy was performed using robot positioning trials, and fracture reduction accuracy was tested in trials on ex vivo porcine model. The system resulted in high fracture reduction reliability with a reduction accuracy of 0.09 mm (translations) and of [Formula: see text] (rotations), maximum observed errors in the order of 0.12 mm (translations) and of [Formula: see text] (rotations), and a reduction repeatability of 0.02 mm and [Formula: see text]. The proposed vision-based system was shown to be effective and suitable for real joint fracture surgical procedures, contributing a potential improvement of their quality.

Voice over Internet Protocol (VoIP) Technology as a Global Learning Tool: Information Systems Success and Control Belief Perspectives

ERIC Educational Resources Information Center

Chen, Charlie C.; Vannoy, Sandra

2013-01-01

Voice over Internet Protocol- (VoIP) enabled online learning service providers struggling with high attrition rates and low customer loyalty issues despite VoIP's high degree of system fit for online global learning applications. Effective solutions to this prevalent problem rely on the understanding of system quality, information quality, and…

Comparison of predictive control methods for high consumption industrial furnace.

PubMed

Stojanovski, Goran; Stankovski, Mile

2013-01-01

We describe several predictive control approaches for high consumption industrial furnace control. These furnaces are major consumers in production industries, and reducing their fuel consumption and optimizing the quality of the products is one of the most important engineer tasks. In order to demonstrate the benefits from implementation of the advanced predictive control algorithms, we have compared several major criteria for furnace control. On the basis of the analysis, some important conclusions have been drawn.

Influence of a high fibre diet on glycaemic control and quality of life in dogs with diabetes mellitus.

PubMed

Graham, P A; Maskell, E; Rawlings, J M; Nash, A S; Markwell, P J

2002-02-01

A study was undertaken to evaluate a high fibre diet used in the management of 10 dogs with naturally occurring insulin-dependent diabetes mellitus. Following baseline measurements of health and glycaemic control, the dogs were fed a canned diet containing a blend of insoluble and soluble dietary fibres and were monitored during the ensuing four months. Switching to the high fibre diet was associated with significantly lower mean 24-hour and postprandial plasma glucose concentrations, which were maintained over the study period. The high fibre diet was also associated with significant reductions in plasma concentrations of fructosamine, glycated haemoglobin, free glycerol and cholesterol, and there were significant improvements in dog activity and demeanour. Bodyweight declined during the fourth month of feeding the diet, which is likely to have resulted from underfeeding relative to increased activity. The results indicate that a high fibre diet can significantly improve glycaemic control and quality of life in dogs with diabetes mellitus.

The Transforming Maternity Care Project: Goals, Methods, and Outcomes of a National Maternity Care Policy Initiative, With Construction of a Theoretical Model to Explain the Process

DTIC Science & Technology

2011-03-21

to and receive comprehensive high-quality, high-value reproductive health and maternity care. • Comprehensive health care reform strategies...and its implementation, ensure that access to comprehensive, high-quality reproductive health and maternity care services are essential benefits for... Reproductive Health, Centers for Disease Control and Prevention Stakeholder Workgroup Consumers and their Advocates Chair: Judy Norsigian

Improving transcriptome construction in non-model organisms: integrating manual and automated gene definition in Emiliania huxleyi.

PubMed

Feldmesser, Ester; Rosenwasser, Shilo; Vardi, Assaf; Ben-Dor, Shifra

2014-02-22

The advent of Next Generation Sequencing technologies and corresponding bioinformatics tools allows the definition of transcriptomes in non-model organisms. Non-model organisms are of great ecological and biotechnological significance, and consequently the understanding of their unique metabolic pathways is essential. Several methods that integrate de novo assembly with genome-based assembly have been proposed. Yet, there are many open challenges in defining genes, particularly where genomes are not available or incomplete. Despite the large numbers of transcriptome assemblies that have been performed, quality control of the transcript building process, particularly on the protein level, is rarely performed if ever. To test and improve the quality of the automated transcriptome reconstruction, we used manually defined and curated genes, several of them experimentally validated. Several approaches to transcript construction were utilized, based on the available data: a draft genome, high quality RNAseq reads, and ESTs. In order to maximize the contribution of the various data, we integrated methods including de novo and genome based assembly, as well as EST clustering. After each step a set of manually curated genes was used for quality assessment of the transcripts. The interplay between the automated pipeline and the quality control indicated which additional processes were required to improve the transcriptome reconstruction. We discovered that E. huxleyi has a very high percentage of non-canonical splice junctions, and relatively high rates of intron retention, which caused unique issues with the currently available tools. While individual tools missed genes and artificially joined overlapping transcripts, combining the results of several tools improved the completeness and quality considerably. The final collection, created from the integration of several quality control and improvement rounds, was compared to the manually defined set both on the DNA and protein levels, and resulted in an improvement of 20% versus any of the read-based approaches alone. To the best of our knowledge, this is the first time that an automated transcript definition is subjected to quality control using manually defined and curated genes and thereafter the process is improved. We recommend using a set of manually curated genes to troubleshoot transcriptome reconstruction.

Effects of different doses of high-speed resistance training on physical performance and quality of life in older women: a randomized controlled trial

PubMed Central

Ramirez-Campillo, Rodrigo; Diaz, Daniela; Martinez-Salazar, Cristian; Valdés-Badilla, Pablo; Delgado-Floody, Pedro; Méndez-Rebolledo, Guillermo; Cañas-Jamet, Rodrigo; Cristi-Montero, Carlos; García-Hermoso, Antonio; Celis-Morales, Carlos; Moran, Jason; Buford, Thomas W; Rodriguez-Mañas, Leocadio; Alonso-Martinez, Alicia M; Izquierdo, Mikel

2016-01-01

Objective This study aimed to compare the effects of two frequencies of high-speed resistance training (HSRT) on physical performance and quality of life of older women. Methods A total of 24 older women participated in a 12-week HSRT program composed of either two or three sessions/week (equated for volume and intensity). Women were randomized into three arms: a control group (CG, n=8), a resistance training group performing two sessions/week (RT2, n=8), and a resistance training group performing three sessions/week (RT3, n=8). The training program for both experimental groups included exercises that required high-speed concentric muscle actions. Results No baseline differences were observed among groups. Compared with the CG, both training groups showed similar small to moderate improvements (P<0.05) in muscle strength, power, functional performance, balance, and quality of life. Conclusion These results suggest that equated for volume and intensity, two and three training sessions/week of HSRT are equally effective for improving physical performance and quality of life of older women. PMID:28008239

Growth of High-Quality GaAs on Ge by Controlling the Thickness and Growth Temperature of Buffer Layer

NASA Astrophysics Data System (ADS)

Zhou, Xu-Liang; Pan, Jiao-Qing; Yu, Hong-Yan; Li, Shi-Yan; Wang, Bao-Jun; Bian, Jing; Wang, Wei

2014-12-01

High-quality GaAs thin films grown on miscut Ge substrates are crucial for GaAs-based devices on silicon. We investigate the effect of different thicknesses and temperatures of GaAs buffer layers on the crystal quality and surface morphology of GaAs on Ge by metal-organic chemical vapor deposition. Through high resolution x-ray diffraction measurements, it is demonstrated that the full width at half maximum for the GaAs epilayer (Ge substrate) peak could achieve 19.3 (11.0) arcsec. The value of etch pit density could be 4×104 cm-2. At the same time, GaAs surfaces with no pyramid-shaped pits are obtained when the buffer layer growth temperature is lower than 360°C, due to effective inhibition of initial nucleation at terraces of the Ge surface. In addition, it is shown that large island formation at the initial stage of epitaxial growth is a significant factor for the final rough surface and that this initial stage should be carefully controlled when a device quality GaAs surface is desired.

Effects of different doses of high-speed resistance training on physical performance and quality of life in older women: a randomized controlled trial.

PubMed

Ramirez-Campillo, Rodrigo; Diaz, Daniela; Martinez-Salazar, Cristian; Valdés-Badilla, Pablo; Delgado-Floody, Pedro; Méndez-Rebolledo, Guillermo; Cañas-Jamet, Rodrigo; Cristi-Montero, Carlos; García-Hermoso, Antonio; Celis-Morales, Carlos; Moran, Jason; Buford, Thomas W; Rodriguez-Mañas, Leocadio; Alonso-Martinez, Alicia M; Izquierdo, Mikel

2016-01-01

This study aimed to compare the effects of two frequencies of high-speed resistance training (HSRT) on physical performance and quality of life of older women. A total of 24 older women participated in a 12-week HSRT program composed of either two or three sessions/week (equated for volume and intensity). Women were randomized into three arms: a control group (CG, n=8), a resistance training group performing two sessions/week (RT2, n=8), and a resistance training group performing three sessions/week (RT3, n=8). The training program for both experimental groups included exercises that required high-speed concentric muscle actions. No baseline differences were observed among groups. Compared with the CG, both training groups showed similar small to moderate improvements ( P <0.05) in muscle strength, power, functional performance, balance, and quality of life. These results suggest that equated for volume and intensity, two and three training sessions/week of HSRT are equally effective for improving physical performance and quality of life of older women.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Costa, Mafalda T., E-mail: mafaldatcosta@gmail.com; Carolino, Elisabete, E-mail: lizcarolino@gmail.com; Oliveira, Teresa A., E-mail: teresa.oliveira@uab.pt

In water supply systems with distribution networkthe most critical aspects of control and Monitoring of water quality, which generates crises system, are the effects of cross-contamination originated by the network typology. The classics of control of quality systems through the application of Shewhart charts are generally difficult to manage in real time due to the high number of charts that must be completed and evaluated. As an alternative to the traditional control systems with Shewhart charts, this study aimed to apply a simplified methodology of a monitoring plan quality parameters in a drinking water distribution, by applying Hotelling’s T{sup 2}more » charts and supplemented with Shewhart charts with Bonferroni limits system, whenever instabilities with processes were detected.« less

Towards an integrated quality control procedure for eddy-covariance data

NASA Astrophysics Data System (ADS)

Vitale, Domenico; Papale, Dario

2017-04-01

The eddy-covariance technique is nowadays the most reliable and direct way, allowing to calculate the main fluxes of Sensible and Latent Heat and of Net Ecosystem Exchange, this last being the result of the difference between the CO2 assimilated by photosynthetic activities and those released to the atmosphere through the ecosystem respiration processes. Despite the improvements in accuracy of measurement instruments and software development, the eddy-covariance technique is not suitable under non-ideal conditions respect to the instruments characteristics and the physical assumption behind the technique mainly related to the well-developed and stationary turbulence conditions. Under these conditions the calculated fluxes are not reliable and need to be flagged and discarded. In order to discover these unavoidable "bad" fluxes and build dataset with the highest quality, several tests applied both on high-frequency (10-20 Hz) raw data and on half-hourly times series have been developed in the past years. Nevertheless, there is an increasing need to develop a standardized quality control procedure suitable not only for the analysis of long-term data, but also for the near-real time data processing. In this paper, we review established quality assessment procedures and present an innovative quality control strategy with the purpose of integrating the existing consolidated procedures with robust and advanced statistical tests more suitable for the analysis of time series data. The performance of the proposed quality control strategy is evaluated both on simulated and EC data distributed by the ICOS research infrastructure. It is concluded that the proposed strategy is able to flag and exclude unrealistic fluxes while being reproducible and retaining the largest possible amount of high quality data.

Generating Options for Active Risk Control (GO-ARC): introducing a novel technique.

PubMed

Card, Alan J; Ward, James R; Clarkson, P John

2014-01-01

After investing significant amounts of time and money in conducting formal risk assessments, such as root cause analysis (RCA) or failure mode and effects analysis (FMEA), healthcare workers are left to their own devices in generating high-quality risk control options. They often experience difficulty in doing so, and tend toward an overreliance on administrative controls (the weakest category in the hierarchy of risk controls). This has important implications for patient safety and the cost effectiveness of risk management operations. This paper describes a before and after pilot study of the Generating Options for Active Risk Control (GO-ARC) technique, a novel tool to improve the quality of the risk control options generation process. The quantity, quality (using the three-tiered hierarchy of risk controls), variety, and novelty of risk controls generated. Use of the GO-ARC technique was associated with improvement on all measures. While this pilot study has some notable limitations, it appears that the GO-ARC technique improved the risk control options generation process. Further research is needed to confirm this finding. It is also important to note that improved risk control options are a necessary, but not sufficient, step toward the implementation of more robust risk controls. © 2013 National Association for Healthcare Quality.

High-field open versus short-bore magnetic resonance imaging of the spine: a randomized controlled comparison of image quality.

PubMed

Enders, Judith; Rief, Matthias; Zimmermann, Elke; Asbach, Patrick; Diederichs, Gerd; Wetz, Christoph; Siebert, Eberhard; Wagner, Moritz; Hamm, Bernd; Dewey, Marc

2013-01-01

The purpose of the present study was to compare the image quality of spinal magnetic resonance (MR) imaging performed on a high-field horizontal open versus a short-bore MR scanner in a randomized controlled study setup. Altogether, 93 (80% women, mean age 53) consecutive patients underwent spine imaging after random assignement to a 1-T horizontal open MR scanner with a vertical magnetic field or a 1.5-T short-bore MR scanner. This patient subset was part of a larger cohort. Image quality was assessed by determining qualitative parameters, signal-to-noise (SNR) and contrast-to-noise ratios (CNR), and quantitative contour sharpness. The image quality parameters were higher for short-bore MR imaging. Regarding all sequences, the relative differences were 39% for the mean overall qualitative image quality, 53% for the mean SNR values, and 34-37% for the quantitative contour sharpness (P<0.0001). The CNR values were also higher for images obtained with the short-bore MR scanner. No sequence was of very poor (nondiagnostic) image quality. Scanning times were significantly longer for examinations performed on the open MR scanner (mean: 32±22 min versus 20±9 min; P<0.0001). In this randomized controlled comparison of spinal MR imaging with an open versus a short-bore scanner, short-bore MR imaging revealed considerably higher image quality with shorter scanning times. ClinicalTrials.gov NCT00715806.

High-Field Open versus Short-Bore Magnetic Resonance Imaging of the Spine: A Randomized Controlled Comparison of Image Quality

PubMed Central

Zimmermann, Elke; Asbach, Patrick; Diederichs, Gerd; Wetz, Christoph; Siebert, Eberhard; Wagner, Moritz; Hamm, Bernd; Dewey, Marc

2013-01-01

Background The purpose of the present study was to compare the image quality of spinal magnetic resonance (MR) imaging performed on a high-field horizontal open versus a short-bore MR scanner in a randomized controlled study setup. Methods Altogether, 93 (80% women, mean age 53) consecutive patients underwent spine imaging after random assignement to a 1-T horizontal open MR scanner with a vertical magnetic field or a 1.5-T short-bore MR scanner. This patient subset was part of a larger cohort. Image quality was assessed by determining qualitative parameters, signal-to-noise (SNR) and contrast-to-noise ratios (CNR), and quantitative contour sharpness. Results The image quality parameters were higher for short-bore MR imaging. Regarding all sequences, the relative differences were 39% for the mean overall qualitative image quality, 53% for the mean SNR values, and 34–37% for the quantitative contour sharpness (P<0.0001). The CNR values were also higher for images obtained with the short-bore MR scanner. No sequence was of very poor (nondiagnostic) image quality. Scanning times were significantly longer for examinations performed on the open MR scanner (mean: 32±22 min versus 20±9 min; P<0.0001). Conclusions In this randomized controlled comparison of spinal MR imaging with an open versus a short-bore scanner, short-bore MR imaging revealed considerably higher image quality with shorter scanning times. Trial Registration ClinicalTrials.gov NCT00715806 PMID:24391767

Genetic mapping of FAD2 genes and their relative contribution towards oil quality in peanut (Arachis hypogaea L.)

USDA-ARS?s Scientific Manuscript database

Improvement of oil quality is the major research objective in peanut because of its high economic impact on growers/traders and several health benefits to consumers. Fatty acid desaturase (FAD) genes are known to control quality traits but their position on the peanut genome and their relative contr...

Expediting the Quest for Quality: The Role of IQAC in Academic Audit

ERIC Educational Resources Information Center

Nitonde, Rohidas

2016-01-01

Academic Audit is an important tool to control and maintain standards in academic sector. It has been found highly relevant by the experts across the world. Academic audit helps institutions to introspect and improve their quality. The present paper intends to probe into the possible role of Internal Quality Assurance Cell (IQAC) in Academic Audit…

An Automated Treatment Plan Quality Control Tool for Intensity-Modulated Radiation Therapy Using a Voxel-Weighting Factor-Based Re-Optimization Algorithm.

PubMed

Song, Ting; Li, Nan; Zarepisheh, Masoud; Li, Yongbao; Gautier, Quentin; Zhou, Linghong; Mell, Loren; Jiang, Steve; Cerviño, Laura

2016-01-01

Intensity-modulated radiation therapy (IMRT) currently plays an important role in radiotherapy, but its treatment plan quality can vary significantly among institutions and planners. Treatment plan quality control (QC) is a necessary component for individual clinics to ensure that patients receive treatments with high therapeutic gain ratios. The voxel-weighting factor-based plan re-optimization mechanism has been proved able to explore a larger Pareto surface (solution domain) and therefore increase the possibility of finding an optimal treatment plan. In this study, we incorporated additional modules into an in-house developed voxel weighting factor-based re-optimization algorithm, which was enhanced as a highly automated and accurate IMRT plan QC tool (TPS-QC tool). After importing an under-assessment plan, the TPS-QC tool was able to generate a QC report within 2 minutes. This QC report contains the plan quality determination as well as information supporting the determination. Finally, the IMRT plan quality can be controlled by approving quality-passed plans and replacing quality-failed plans using the TPS-QC tool. The feasibility and accuracy of the proposed TPS-QC tool were evaluated using 25 clinically approved cervical cancer patient IMRT plans and 5 manually created poor-quality IMRT plans. The results showed high consistency between the QC report quality determinations and the actual plan quality. In the 25 clinically approved cases that the TPS-QC tool identified as passed, a greater difference could be observed for dosimetric endpoints for organs at risk (OAR) than for planning target volume (PTV), implying that better dose sparing could be achieved in OAR than in PTV. In addition, the dose-volume histogram (DVH) curves of the TPS-QC tool re-optimized plans satisfied the dosimetric criteria more frequently than did the under-assessment plans. In addition, the criteria for unsatisfied dosimetric endpoints in the 5 poor-quality plans could typically be satisfied when the TPS-QC tool generated re-optimized plans without sacrificing other dosimetric endpoints. In addition to its feasibility and accuracy, the proposed TPS-QC tool is also user-friendly and easy to operate, both of which are necessary characteristics for clinical use.

The association between the environmental endocrine disruptor bisphenol A and polycystic ovary syndrome: a systematic review and meta-analysis.

PubMed

Hu, Ying; Wen, Shu; Yuan, Dongzhi; Peng, Le; Zeng, Rujun; Yang, Zhilan; Liu, Qi; Xu, Liangzhi; Kang, Deying

2018-05-01

To investigate the association between bisphenol A (BPA) and polycystic ovary syndrome (PCOS). A systematic review and meta-analysis using STATA software for observational studies. Nine studies involving 493 PCOS patients and 440 controls were included in this review. The meta-analysis demonstrated that PCOS patients had significantly higher BPA levels compared with control groups (standardized mean difference (SMD): 2.437, 95% confidence interval (CI): (1.265, 3.609), p < .001). For studies of serum samples detected by enzyme-linked immunosorbent assay (ELISA), subgroup analyses according to ethnicity, body mass index (BMI), sample size, detection method (high-performance liquid chromatography (HPLC) and ELISA), PCOS-to-control ratio and study quality displayed that high BPA levels were significantly associated with Caucasian PCOS patients (SMD: 0.615, 95% CI: (0.308, 0.922), p < .001), high BMI (SMD: 0.512, 95% CI: (0.180, 0.843), p = .002), high quality (SMD: 0.624, 95% CI: (0.391, 0.856), p < .001), and high HOMA-IR (SMD: 0.467, 95% CI: (0.121, 0.813), p = .008). Serum BPA may be positively associated with women with PCOS and BPA might be involved in the insulin-resistance and hyperandrogenism of PCOS. More evidence from high quality studies, advanced detection methods, and larger cohorts for observational trials are needed to further confirm the association between BPA and PCOS.

The association between higher body mass index and poor school performance in high school students.

PubMed

Tonetti, L; Fabbri, M; Filardi, M; Martoni, M; Natale, V

2016-12-01

This study aimed to examine the association between body mass index (BMI) and school performance in high school students by controlling for relevant mediators such as sleep quality, sleep duration and socioeconomic status. Thirty-seven high school students (mean age: 18.16 ± 0.44 years) attending the same school type, i.e. 'liceo scientifico' (science-based high school), were enrolled. Students' self-reported weight and height were used to calculate BMI. Participants wore an actigraph to objectively assess the quality and duration of sleep. School performance was assessed through the actual grade obtained at the final school-leaving exam, in which higher grades indicate higher performance. BMI, get-up time, mean motor activity, wake after sleep onset and number of awakenings were negatively correlated with the grade, while sleep efficiency was positively correlated. When performing a multiple regression analysis, BMI proved the only significant (negative) predictor of grade. When controlling for sleep quality, sleep duration and socioeconomic status, a higher BMI is associated with a poorer school performance in high school students. © 2015 World Obesity Federation.

Effects of yoga on chronic neck pain: a systematic review of randomized controlled trials

PubMed Central

Kim, Sang-Dol

2016-01-01

[Purpose] The aim of this study was to investigate the effectiveness of yoga in the management of chronic neck pain. [Subjects and Methods] Five electronic databases were searched to identify randomized controlled trials (RCTs) of yoga intervention on chronic neck pain. The trials were published in the English language between January 1966 and December 2015. The Cochrane Risk of Bias Tool was used to assess the quality of the trials. [Results] Three trials were identified and included in this review. A critical appraisal was performed on the trials, and the result indicated a high risk of bias. A narrative description was processed because of the small number of RCTs. Neck pain intensity and functional disability were significantly lower in the yoga groups than in the control groups. [Conclusion] Evidence from the 3 randomly controlled trials shows that yoga may be beneficial for chronic neck pain. The low-quality result of the critical appraisal and the small number of trials suggest that high-quality RCTs are required to examine further the effects of yoga intervention on chronic neck pain relief. PMID:27512290

Design and implementation of a control structure for quality products in a crude oil atmospheric distillation column.

PubMed

Sotelo, David; Favela-Contreras, Antonio; Sotelo, Carlos; Jiménez, Guillermo; Gallegos-Canales, Luis

2017-11-01

In recent years, interest for petrochemical processes has been increasing, especially in refinement area. However, the high variability in the dynamic characteristics present in the atmospheric distillation column poses a challenge to obtain quality products. To improve distillates quality in spite of the changes in the input crude oil composition, this paper details a new design of a control strategy in a conventional crude oil distillation plant defined using formal interaction analysis tools. The process dynamic and its control are simulated on Aspen HYSYS ® dynamic environment under real operating conditions. The simulation results are compared against a typical control strategy commonly used in crude oil atmospheric distillation columns. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Conjunctively optimizing flash flood control and water quality in urban water reservoirs by model predictive control and dynamic emulation

NASA Astrophysics Data System (ADS)

Galelli, Stefano; Goedbloed, Albert; Schmitter, Petra; Castelletti, Andrea

2014-05-01

Urban water reservoirs are a viable adaptation option to account for increasing drinking water demand of urbanized areas as they allow storage and re-use of water that is normally lost. In addition, the direct availability of freshwater reduces pumping costs and diversifies the portfolios of drinking water supply. Yet, these benefits have an associated twofold cost. Firstly, the presence of large, impervious areas increases the hydraulic efficiency of urban catchments, with short time of concentration, increased runoff rates, losses of infiltration and baseflow, and higher risk of flash floods. Secondly, the high concentration of nutrients and sediments characterizing urban discharges is likely to cause water quality problems. In this study we propose a new control scheme combining Model Predictive Control (MPC), hydro-meteorological forecasts and dynamic model emulation to design real-time operating policies that conjunctively optimize water quantity and quality targets. The main advantage of this scheme stands in its capability of exploiting real-time hydro-meteorological forecasts, which are crucial in such fast-varying systems. In addition, the reduced computational requests of the MPC scheme allows coupling it with dynamic emulators of water quality processes. The approach is demonstrated on Marina Reservoir, a multi-purpose reservoir located in the heart of Singapore and characterized by a large, highly urbanized catchment with a short (i.e. approximately one hour) time of concentration. Results show that the MPC scheme, coupled with a water quality emulator, provides a good compromise between different operating objectives, namely flood risk reduction, drinking water supply and salinity control. Finally, the scheme is used to assess the effect of source control measures (e.g. green roofs) aimed at restoring the natural hydrological regime of Marina Reservoir catchment.

High dietary quality of non-toxic cyanobacteria for a benthic grazer and its implications for the control of cyanobacterial biofilms.

PubMed

Groendahl, Sophie; Fink, Patrick

2017-05-18

Mass occurrences of cyanobacteria frequently cause detrimental effects to the functioning of aquatic ecosystems. Consequently, attempts haven been made to control cyanobacterial blooms through naturally co-occurring herbivores. Control of cyanobacteria through herbivores often appears to be constrained by their low dietary quality, rather than by the possession of toxins, as also non-toxic cyanobacteria are hardly consumed by many herbivores. It was thus hypothesized that the consumption of non-toxic cyanobacteria may be improved when complemented with other high quality prey. We conducted a laboratory experiment in which we fed the herbivorous freshwater gastropod Lymnaea stagnalis single non-toxic cyanobacterial and unialgal diets or a mixed diet to test if diet-mixing may enable these herbivores to control non-toxic cyanobacterial mass abundances. The treatments where L. stagnalis were fed non-toxic cyanobacteria and a mixed diet provided a significantly higher shell and soft-body growth rate than the average of all single algal, but not the non-toxic cyanobacterial diets. However, the increase in growth provided by the non-toxic cyanobacteria diets could not be related to typical determinants of dietary quality such as toxicity, nutrient stoichiometry or essential fatty acid content. These results strongly contradict previous research which describes non-toxic cyanobacteria as a low quality food resource for freshwater herbivores in general. Our findings thus have strong implications to gastropod-cyanobacteria relationships and suggest that freshwater gastropods may be able to control mass occurrences of benthic non-toxic cyanobacteria, frequently observed in eutrophied water bodies worldwide.

Analysis of the longitudinal handling qualities and pilot-induced-oscillation tendencies of the High-Angle-of-Attack Research Vehicle (HARV)

NASA Technical Reports Server (NTRS)

Hess, Ronald A.

1994-01-01

The NASA High-Angle-of Attack Research Vehicle (HARV), a modified F-18 aircraft, experienced handling qualities problems in recent flight tests at NASA Dryden Research Center. Foremost in these problems was the tendency of the pilot-aircraft system to exhibit a potentially dangerous phenomenon known as a pilot-induced oscillation (PIO). When they occur, PIO's can severely restrict performance, sharply dimish mission capabilities, and can even result in aircraft loss. A pilot/vehicle analysis was undertaken with the goal of reducing these PIO tendencies and improving the overall vehicle handling qualities with as few changes as possible to the existing feedback/feedforward flight control laws. Utilizing a pair of analytical pilot models developed by the author, a pilot/vehicle analysis of the existing longitudinal flight control system was undertaken. The analysis included prediction of overall handling qualities levels and PIO susceptability. The analysis indicated that improvement in the flight control system was warranted and led to the formulation of a simple control stick command shaping filter. Analysis of the pilot/vehicle system with the shaping filter indicated significant improvements in handling qualities and PIO tendencies could be achieved. A non-real time simulation of the modified control system was undertaken with a realistic, nonlinear model of the current HARV. Special emphasis was placed upon those details of the command filter implementation which could effect safety of flight. The modified system is currently awaiting evaluation in the real-time, pilot-in-the-loop, Dual-Maneuvering-Simulator (DMS) facility at Langley.

Rotorcraft flying qualities improvement using advanced control

NASA Technical Reports Server (NTRS)

Walker, D.; Postlethwaite, I.; Howitt, J.; Foster, N.

1993-01-01

We report on recent experience gained when a multivariable helicopter flight control law was tested on the Large Motion Simulator (LMS) at DRA Bedford. This was part of a study into the application of multivariable control theory to the design of full-authority flight control systems for high-performance helicopters. In this paper, we present some of the results that were obtained during the piloted simulation trial and from subsequent off-line simulation and analysis. The performance provided by the control law led to level 1 handling quality ratings for almost all of the mission task elements assessed, both during the real-time and off-line analysis.

Real-time control system for adaptive resonator

DOE Office of Scientific and Technical Information (OSTI.GOV)

Flath, L; An, J; Brase, J

2000-07-24

Sustained operation of high average power solid-state lasers currently requires an adaptive resonator to produce the optimal beam quality. We describe the architecture of a real-time adaptive control system for correcting intra-cavity aberrations in a heat capacity laser. Image data collected from a wavefront sensor are processed and used to control phase with a high-spatial-resolution deformable mirror. Our controller takes advantage of recent developments in low-cost, high-performance processor technology. A desktop-based computational engine and object-oriented software architecture replaces the high-cost rack-mount embedded computers of previous systems.

Chronic Low Quality Sleep Impairs Postural Control in Healthy Adults.

PubMed

Furtado, Fabianne; Gonçalves, Bruno da Silva B; Abranches, Isabela Lopes Laguardia; Abrantes, Ana Flávia; Forner-Cordero, Arturo

2016-01-01

The lack of sleep, both in quality and quantity, is an increasing problem in modern society, often related to workload and stress. A number of studies have addressed the effects of acute (total) sleep deprivation on postural control. However, up to date, the effects of chronic sleep deficits, either in quantity or quality, have not been analyzed. Thirty healthy adults participated in the study that consisted of registering activity with a wrist actigraph for more than a week before performing a series of postural control tests. Sleep and circadian rhythm variables were correlated and the sum of activity of the least active 5-h period, L5, a rhythm variable, obtained the greater coefficient value with sleep quality variables (wake after sleep onset WASO and efficiency sleep). Cluster analysis was performed to classify subjects into two groups based on L5 (low and high). The balance tests scores used to asses postural control were measured using Biodex Balance System and were compared between the two groups with different sleep quality. The postural tests were divided into dynamic (platform tilt with eyes open, closed and cursor) and static (clinical test of sensory integration). The results showed that during the tests with eyes closed, the group with worse sleep quality had also worse postural control performance. Lack of vision impairs postural balance more deeply in subjects with chronic sleep inefficiency. Chronic poor sleep quality impairs postural control similarly to total sleep deprivation.

Chronic Low Quality Sleep Impairs Postural Control in Healthy Adults

PubMed Central

Gonçalves, Bruno da Silva B.; Abranches, Isabela Lopes Laguardia; Abrantes, Ana Flávia

2016-01-01

The lack of sleep, both in quality and quantity, is an increasing problem in modern society, often related to workload and stress. A number of studies have addressed the effects of acute (total) sleep deprivation on postural control. However, up to date, the effects of chronic sleep deficits, either in quantity or quality, have not been analyzed. Thirty healthy adults participated in the study that consisted of registering activity with a wrist actigraph for more than a week before performing a series of postural control tests. Sleep and circadian rhythm variables were correlated and the sum of activity of the least active 5-h period, L5, a rhythm variable, obtained the greater coefficient value with sleep quality variables (wake after sleep onset WASO and efficiency sleep). Cluster analysis was performed to classify subjects into two groups based on L5 (low and high). The balance tests scores used to asses postural control were measured using Biodex Balance System and were compared between the two groups with different sleep quality. The postural tests were divided into dynamic (platform tilt with eyes open, closed and cursor) and static (clinical test of sensory integration). The results showed that during the tests with eyes closed, the group with worse sleep quality had also worse postural control performance. Lack of vision impairs postural balance more deeply in subjects with chronic sleep inefficiency. Chronic poor sleep quality impairs postural control similarly to total sleep deprivation. PMID:27732604

Low-quality birds do not display high-quality signals: The cysteine-pheomelanin mechanism of honesty

PubMed Central

Galván, Ismael; Wakamatsu, Kazumasa; Camarero, Pablo R; Mateo, Rafael; Alonso-Alvarez, Carlos

2015-01-01

The mechanisms that make that the costs of producing high-quality signals are unaffordable to low-quality signalers are a current issue in animal communication. The size of the melanin-based bib of male house sparrows Passer domesticus honestly signals quality. We induced the development of new bibs while treating males with buthionine-sulfoximine (BSO), a substance that depletes the levels of the antioxidant glutathione (GSH) and the amino acid cysteine, two elements that switch melanogenesis from eumelanin to pheomelanin. Final bib size is negatively related to pheomelanin levels in the bib feathers. BSO reduced cysteine and GSH levels in all birds, but improved phenotypes (bibs larger than controls) were only expressed by high-quality birds (BSO birds with largest bibs initially). Negative associations between final bib size and cysteine levels in erythrocytes, and between pheomelanin and cysteine levels, were observed in high-quality birds only. These findings suggest that a mechanism uncoupling pheomelanin and cysteine levels may have evolved in low-quality birds to avoid producing bibs of size not corresponding to their quality and greater relative costs. Indeed, greater oxidative stress in cells was not observed in low-quality birds. This may represent the first mechanism maintaining signal honesty without producing greater relative costs on low-quality signalers. PMID:25330349

Recommendations of the DNA Commission of the International Society for Forensic Genetics (ISFG) on quality control of autosomal Short Tandem Repeat allele frequency databasing (STRidER).

PubMed

Bodner, Martin; Bastisch, Ingo; Butler, John M; Fimmers, Rolf; Gill, Peter; Gusmão, Leonor; Morling, Niels; Phillips, Christopher; Prinz, Mechthild; Schneider, Peter M; Parson, Walther

2016-09-01

The statistical evaluation of autosomal Short Tandem Repeat (STR) genotypes is based on allele frequencies. These are empirically determined from sets of randomly selected human samples, compiled into STR databases that have been established in the course of population genetic studies. There is currently no agreed procedure of performing quality control of STR allele frequency databases, and the reliability and accuracy of the data are largely based on the responsibility of the individual contributing research groups. It has been demonstrated with databases of haploid markers (EMPOP for mitochondrial mtDNA, and YHRD for Y-chromosomal loci) that centralized quality control and data curation is essential to minimize error. The concepts employed for quality control involve software-aided likelihood-of-genotype, phylogenetic, and population genetic checks that allow the researchers to compare novel data to established datasets and, thus, maintain the high quality required in forensic genetics. Here, we present STRidER (http://strider.online), a publicly available, centrally curated online allele frequency database and quality control platform for autosomal STRs. STRidER expands on the previously established ENFSI DNA WG STRbASE and applies standard concepts established for haploid and autosomal markers as well as novel tools to reduce error and increase the quality of autosomal STR data. The platform constitutes a significant improvement and innovation for the scientific community, offering autosomal STR data quality control and reliable STR genotype estimates. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

High-resolution wavefront control of high-power laser systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brase, J; Brown, C; Carrano, C

1999-07-08

Nearly every new large-scale laser system application at LLNL has requirements for beam control which exceed the current level of available technology. For applications such as inertial confinement fusion, laser isotope separation, laser machining, and laser the ability to transport significant power to a target while maintaining good beam quality is critical. There are many ways that laser wavefront quality can be degraded. Thermal effects due to the interaction of high-power laser or pump light with the internal optical components or with the ambient gas are common causes of wavefront degradation. For many years, adaptive optics based on thing deformablemore » glass mirrors with piezoelectric or electrostrictive actuators have be used to remove the low-order wavefront errors from high-power laser systems. These adaptive optics systems have successfully improved laser beam quality, but have also generally revealed additional high-spatial-frequency errors, both because the low-order errors have been reduced and because deformable mirrors have often introduced some high-spatial-frequency components due to manufacturing errors. Many current and emerging laser applications fall into the high-resolution category where there is an increased need for the correction of high spatial frequency aberrations which requires correctors with thousands of degrees of freedom. The largest Deformable Mirrors currently available have less than one thousand degrees of freedom at a cost of approximately $1M. A deformable mirror capable of meeting these high spatial resolution requirements would be cost prohibitive. Therefore a new approach using a different wavefront control technology is needed. One new wavefront control approach is the use of liquid-crystal (LC) spatial light modulator (SLM) technology for the controlling the phase of linearly polarized light. Current LC SLM technology provides high-spatial-resolution wavefront control, with hundreds of thousands of degrees of freedom, more than two orders of magnitude greater than the best Deformable Mirrors currently made. Even with the increased spatial resolution, the cost of these devices is nearly two orders of magnitude less than the cost of the largest deformable mirror.« less

Feasibility and effects of a combined adjuvant high-intensity interval/strength training in breast cancer patients: a single-center pilot study.

PubMed

Schulz, Sebastian Viktor Waldemar; Laszlo, Roman; Otto, Stephanie; Prokopchuk, Dmytro; Schumann, Uwe; Ebner, Florian; Huober, Jens; Steinacker, Jürgen Michael

2018-06-01

To evaluate feasibility of an exercise intervention consisting of high-intensity interval endurance and strength training in breast cancer patients. Twenty-six women with nonmetastatic breast cancer were consecutively assigned to the exercise intervention- (n= 15, mean age 51.9 ± 9.8 years) and the control group (n = 11, mean age 56.9 ± 7.0 years). Cardiopulmonary exercise testing that included lactate sampling, one-repetition maximum tests and a HADS-D questionnaire were used to monitor patients both before and after a supervised six weeks period of either combined high-intensity interval endurance and strength training (intervention group, twice a week) or leisure training (control group). Contrarily to the control group, endurance (mean change of VO 2 , peak 12.0 ± 13.0%) and strength performance (mean change of cumulative load 25.9 ± 11.2%) and quality of life increased in the intervention group. No training-related adverse events were observed. Our guided exercise intervention could be used effectively for initiation and improvement of performance capacity and quality of life in breast cancer patients in a relatively short time. This might be especially attractive during medical treatment. Long-term effects have to be evaluated in randomized controlled studies also with a longer follow-up. Implications for Rehabilitation High-intensity interval training allows improvement of aerobic capacity within a comparable short time. Standard leisure training in breast cancer patients is rather suitable for the maintenance of performance capacity and quality of life. Guided high-intensity interval training combined with strength training can be used effectively for the improvement of endurance and strength capacity and also quality of life. After exclusion of contraindications, guided adjuvant high-intensity interval training combined with strength training can be safely used in breast cancer patients.

Comprehensive analysis of chemical constituents in Xingxiong injection by high performance liquid chromatography coupled with mass spectrometry.

PubMed

Guo, Long; Dou, Li-Li; Duan, Li; Liu, Ke; Bi, Zhi-Ming; Li, Ping; Liu, E-Hu

2015-09-01

Xingxiong injection (XXI) is a widely used Chinese herbal formula prepared by the folium ginkgo extract and ligustrazine for the treatment of cardiovascular and cerebrovascular diseases. Compared with the pharmacological studies, chemical analysis and quality control studies on this formula are relatively limited. In the present study, a high performance liquid chromatography coupled with quadrupole time-of-flight mass spectrometry (HPLC-QTOF MS) method was applied to comprehensive analysis of constituents in XXI. According to the fragmentation rules and previous reports, thirty ginkgo flavonoids, four ginkgo terpene lactones, and one alkaloid were identified. A high performance liquid chromatography coupled with triple quadrupole mass spectrometry (HPLC-QQQ MS) method was then applied to quantify ten major constituents in XXI. The method validation results indicated that the developed method had desirable specificity, linearity, precision and accuracy. The total contents of ginkgo flavonoids were about 22.05-25.51 μg·mL(-1) and the ginkgo terpene lactones amounts were about 4.41-8.70 μg·mL(-1) in six batches of XXI samples, respectively. Furthermore, cosine ratio algorithm and distance measurements were employed to evaluate the similarity of XXI samples, and the results demonstrated a high-quality consistency. This work could provide comprehensive information on the quality control of Xingxiong injection, which be helpful in the establishment of a rational quality control standard. Copyright © 2015 China Pharmaceutical University. Published by Elsevier B.V. All rights reserved.

Performance evaluation of traffic sensing and control devices.

DOT National Transportation Integrated Search

2011-01-01

High quality vehicle detection is essential to properly operate actuated phases at traffic signals and to facilitate effective : management of technician and engineering resources. INDOT operates over 2600 traffic signal controllers, approximately 20...

A precipitation database of station-based daily and monthly measurements for West Africa: Overview, quality control and harmonization

NASA Astrophysics Data System (ADS)

Bliefernicht, Jan; Waongo, Moussa; Annor, Thompson; Laux, Patrick; Lorenz, Manuel; Salack, Seyni; Kunstmann, Harald

2017-04-01

West Africa is a data sparse region. High quality and long-term precipitation data are often not readily available for applications in hydrology, agriculture, meteorology and other needs. To close this gap, we use multiple data sources to develop a precipitation database with long-term daily and monthly time series. This database was compiled from 16 archives including global databases e.g. from the Global Historical Climatology Network (GHCN), databases from research projects (e.g. the AMMA database) and databases of the national meteorological services of some West African countries. The collection consists of more than 2000 precipitation gauges with measurements dating from 1850 to 2015. Due to erroneous measurements (e.g. temporal offsets, unit conversion errors), missing values and inconsistent meta-data, the merging of this precipitation dataset is not straightforward and requires a thorough quality control and harmonization. To this end, we developed geostatistical-based algorithms for quality control of individual databases and harmonization to a joint database. The algorithms are based on a pairwise comparison of the correspondence of precipitation time series in dependence to the distance between stations. They were tested for precipitation time series from gages located in a rectangular domain covering Burkina Faso, Ghana, Benin and Togo. This harmonized and quality controlled precipitation database was recently used for several applications such as the validation of a high resolution regional climate model and the bias correction of precipitation projections provided the Coordinated Regional Climate Downscaling Experiment (CORDEX). In this presentation, we will give an overview of the novel daily and monthly precipitation database and the algorithms used for quality control and harmonization. We will also highlight the quality of global and regional archives (e.g. GHCN, GSOD, AMMA database) in comparison to the precipitation databases provided by the national meteorological services.

Quality control process improvement of flexible printed circuit board by FMEA

NASA Astrophysics Data System (ADS)

Krasaephol, Siwaporn; Chutima, Parames

2018-02-01

This research focuses on the quality control process improvement of Flexible Printed Circuit Board (FPCB), centred around model 7-Flex, by using Failure Mode and Effect Analysis (FMEA) method to decrease proportion of defective finished goods that are found at the final inspection process. Due to a number of defective units that were found at the final inspection process, high scraps may be escaped to customers. The problem comes from poor quality control process which is not efficient enough to filter defective products from in-process because there is no In-Process Quality Control (IPQC) or sampling inspection in the process. Therefore, the quality control process has to be improved by setting inspection gates and IPCQs at critical processes in order to filter the defective products. The critical processes are analysed by the FMEA method. IPQC is used for detecting defective products and reducing chances of defective finished goods escaped to the customers. Reducing proportion of defective finished goods also decreases scrap cost because finished goods incur higher scrap cost than work in-process. Moreover, defective products that are found during process can reflect the abnormal processes; therefore, engineers and operators should timely solve the problems. Improved quality control was implemented for 7-Flex production lines from July 2017 to September 2017. The result shows decreasing of the average proportion of defective finished goods and the average of Customer Manufacturers Lot Reject Rate (%LRR of CMs) equal to 4.5% and 4.1% respectively. Furthermore, cost saving of this quality control process equals to 100K Baht.

Off-Line Quality Control In Integrated Circuit Fabrication Using Experimental Design

NASA Astrophysics Data System (ADS)

Phadke, M. S.; Kackar, R. N.; Speeney, D. V.; Grieco, M. J.

1987-04-01

Off-line quality control is a systematic method of optimizing production processes and product designs. It is widely used in Japan to produce high quality products at low cost. The method was introduced to us by Professor Genichi Taguchi who is a Deming-award winner and a former Director of the Japanese Academy of Quality. In this paper we will i) describe the off-line quality control method, and ii) document our efforts to optimize the process for forming contact windows in 3.5 Aim CMOS circuits fabricated in the Murray Hill Integrated Circuit Design Capability Laboratory. In the fabrication of integrated circuits it is critically important to produce contact windows of size very near the target dimension. Windows which are too small or too large lead to loss of yield. The off-line quality control method has improved both the process quality and productivity. The variance of the window size has been reduced by a factor of four. Also, processing time for window photolithography has been substantially reduced. The key steps of off-line quality control are: i) Identify important manipulatable process factors and their potential working levels. ii) Perform fractional factorial experiments on the process using orthogonal array designs. iii) Analyze the resulting data to determine the optimum operating levels of the factors. Both the process mean and the process variance are considered in this analysis. iv) Conduct an additional experiment to verify that the new factor levels indeed give an improvement.

Drug innovation, price controls, and parallel trade.

PubMed

Matteucci, Giorgio; Reverberi, Pierfrancesco

2016-12-21

We study the long-run welfare effects of parallel trade (PT) in pharmaceuticals. We develop a two-country model of PT with endogenous quality, where the pharmaceutical firm negotiates the price of the drug with the government in the foreign country. We show that, even though the foreign government does not consider global R&D costs, (the threat of) PT improves the quality of the drug as long as the foreign consumers' valuation of quality is high enough. We find that the firm's short-run profit may be higher when PT is allowed. Nonetheless, this is neither necessary nor sufficient for improving drug quality in the long run. We also show that improving drug quality is a sufficient condition for PT to increase global welfare. Finally, we show that, when PT is allowed, drug quality may be higher with than without price controls.

Internal quality control: planning and implementation strategies.

PubMed

Westgard, James O

2003-11-01

The first essential in setting up internal quality control (IQC) of a test procedure in the clinical laboratory is to select the proper IQC procedure to implement, i.e. choosing the statistical criteria or control rules, and the number of control measurements, according to the quality required for the test and the observed performance of the method. Then the right IQC procedure must be properly implemented. This review focuses on strategies for planning and implementing IQC procedures in order to improve the quality of the IQC. A quantitative planning process is described that can be implemented with graphical tools such as power function or critical-error graphs and charts of operating specifications. Finally, a total QC strategy is formulated to minimize cost and maximize quality. A general strategy for IQC implementation is recommended that employs a three-stage design in which the first stage provides high error detection, the second stage low false rejection and the third stage prescribes the length of the analytical run, making use of an algorithm involving the average of normal patients' data.

Intervention quality is not routinely assessed in Cochrane systematic reviews of radiation therapy interventions.

PubMed

Abdul Rahim, Mohamad R; James, Melissa L; Hickey, Brigid E

2017-10-01

The aim of this study was to maximise the benefits from clinical trials involving technological interventions such as radiation therapy. High compliance to the quality assurance protocols is crucial. We assessed whether the quality of radiation therapy intervention was evaluated in Cochrane systematic reviews. We searched 416 published Cochrane systematic reviews and identified 67 Cochrane systematic reviews that investigated radiation therapy or radiotherapy as an intervention. For each systematic review, either quality assurance or quality control for the intervention was identified by a description of such processes in the published systematic reviews. Of the 67 Cochrane systematic reviews studied, only two mentioned quality assurance or quality control. Our findings revealed that 65 of 67 (97%) Cochrane systematic reviews of radiation therapy interventions failed to consider the quality of the intervention. We suggest that advice about the evaluation of intervention quality be added to author support materials. © 2017 The Royal Australian and New Zealand College of Radiologists.

One-pot fabrication of high-quality InP/ZnS (core/shell) quantum dots and their application to cellular imaging.

PubMed

Hussain, Sahid; Won, Nayoun; Nam, Jutaek; Bang, Jiwon; Chung, Hyokyun; Kim, Sungjee

2009-07-13

True colors: High-quality InP and InP/ZnS quantum dots (QDs) are obtained by means of a simple one-pot method in the presence of polyethylene glycol (PEG). Rapid and size-controlled reactions lead to highly crystalline and nearly monodisperse QDs at relatively low temperatures. The particles emit from cyan blue to far-red, and are successfully used in cellular imaging (see figure).

Simple, inexpensive technique for high-quality smartphone fundus photography in human and animal eyes.

PubMed

Haddock, Luis J; Kim, David Y; Mukai, Shizuo

2013-01-01

Purpose. We describe in detail a relatively simple technique of fundus photography in human and rabbit eyes using a smartphone, an inexpensive app for the smartphone, and instruments that are readily available in an ophthalmic practice. Methods. Fundus images were captured with a smartphone and a 20D lens with or without a Koeppe lens. By using the coaxial light source of the phone, this system works as an indirect ophthalmoscope that creates a digital image of the fundus. The application whose software allows for independent control of focus, exposure, and light intensity during video filming was used. With this app, we recorded high-definition videos of the fundus and subsequently extracted high-quality, still images from the video clip. Results. The described technique of smartphone fundus photography was able to capture excellent high-quality fundus images in both children under anesthesia and in awake adults. Excellent images were acquired with the 20D lens alone in the clinic, and the addition of the Koeppe lens in the operating room resulted in the best quality images. Successful photodocumentation of rabbit fundus was achieved in control and experimental eyes. Conclusion. The currently described system was able to take consistently high-quality fundus photographs in patients and in animals using readily available instruments that are portable with simple power sources. It is relatively simple to master, is relatively inexpensive, and can take advantage of the expanding mobile-telephone networks for telemedicine.

MALDI-TOF MS for quality control of high protein content sport supplements.

PubMed

De Ceglie, Cristina; Calvano, Cosima D; Zambonin, Carlo G

2015-06-01

High protein content sport nutritional supplements are found as powder products containing, as ingredients, amino acids and proteins with important nutritional values as milk, soy and egg proteins. An EU Food Supplements Directive (2002) requires that supplements should be safe, both in dosages and in purity. It is important, then, to develop rapid and sensitive methods to be employed for the quality control of these substances. In this work, we apply, for the first time, matrix-assisted laser desorption ionization-mass spectrometry as a fast, reproducible and sensitive method for the quality control of sport nutritional supplements based on proteins. To this aim, several commercial egg- and/or milk-based powder products have been processed by in gel or in solution digestion and analyzed in comparison to pure standard products. This strategy allowed to assess the reliability of the indications on proteins (as caseins, whey proteins and ovalbumin) declared in the label of several sport nutritional supplements. Copyright © 2014 Elsevier Ltd. All rights reserved.

Controllable Growth of Monolayer MoS2 and MoSe2 Crystals Using Three-temperature-zone Furnace

NASA Astrophysics Data System (ADS)

Zheng, Binjie; Chen, Yuanfu

2017-12-01

Monolayer molybdenum disulfide (MoS2) and molybdenum diselenide (MoSe2) have attracted a great attention for their exceptional electronic and optoelectronic properties among the two dimensional family. However, controllable synthesis of monolayer crystals with high quality needs to be improved urgently. Here we demonstrate a chemical vapor deposition (CVD) growth of monolayer MoS2 and MoSe2 crystals using three-temperature-zone furnace. Systematical study of the effects of growth pressure, temperature and time on the thickness, morphology and grain size of crystals shows the good controllability. The photoluminescence (PL) characterizations indicate that the as-grown monolayer MoS2 and MoSe2 crystals possess excellent optical qualities with very small full-width-half-maximum (FWHM) of 96 me V and 57 me V, respectively. It is comparable to that of exfoliated monolayers and reveals their high crystal quality. It is promising that our strategy should be applicable for the growth of other transition metal dichalcogenides (TMDs) monolayer crystals.

Quality control for the first large areas of triple-GEM chambers for the CMS endcaps

NASA Astrophysics Data System (ADS)

Abbaneo, D.; Abbas, M.; Abbrescia, M.; Abi Akl, M.; Aboamer, O.; Acosta, D.; Ahmad, A.; Ahmed, W.; Aleksandrov, A.; Altieri, P.; Asawatangtrakuldee, C.; Aspell, P.; Assran, Y.; Awan, I.; Bally, S.; Ban, Y.; Banerjee, S.; Barashko, V.; Barria, P.; Bencze, G.; Beni, N.; Benussi, L.; Bhopatkar, V.; Bianco, S.; Bos, J.; Bouhali, O.; Braghieri, A.; Braibant, S.; Buontempo, S.; Calabria, C.; Caponero, M.; Caputo, C.; Cassese, F.; Castaneda, A.; Cauwenbergh, S.; Cavallo, F. R.; Celik, A.; Choi, M.; Choi, S.; Christiansen, J.; Cimmino, A.; Colafranceschi, S.; Colaleo, A.; Conde Garcia, A.; Czellar, S.; Dabrowski, M. M.; De Lentdecker, G.; De Oliveira, R.; de Robertis, G.; Dildick, S.; Dorney, B.; Endroczi, G.; Errico, F.; Fenyvesi, A.; Ferry, S.; Furic, I.; Giacomelli, P.; Gilmore, J.; Golovtsov, V.; Guiducci, L.; Guilloux, F.; Gutierrez, A.; Hadjiiska, R. M.; Hauser, J.; Hoepfner, K.; Hohlmann, M.; Hoorani, H.; Iaydjiev, P.; Jeng, Y. G.; Kamon, T.; Karchin, P.; Korytov, A.; Krutelyov, S.; Kumar, A.; Kim, H.; Lee, J.; Lenzi, T.; Litov, L.; Loddo, F.; Madorsky, A.; Maerschalk, T.; Maggi, M.; Magnani, A.; Mal, P. K.; Mandal, K.; Marchioro, A.; Marinov, A.; Majumdar, N.; Merlin, J. A.; Mitselmakher, G.; Mohanty, A. K.; Mohapatra, A.; Molnar, J.; Muhammad, S.; Mukhopadhyay, S.; Naimuddin, M.; Nuzzo, S.; Oliveri, E.; Pant, L. M.; Paolucci, P.; Park, I.; Passeggio, G.; Pavlov, B.; Philipps, B.; Piccolo, D.; Postema, H.; Puig Baranac, A.; Radi, A.; Radogna, R.; Raffone, G.; Ranieri, A.; Rashevski, G.; Riccardi, C.; Rodozov, M.; Rodrigues, A.; Ropelewski, L.; RoyChowdhury, S.; Ryu, G.; Ryu, M. S.; Safonov, A.; Salva, S.; Saviano, G.; Sharma, A.; Sharma, A.; Sharma, R.; Shah, A. H.; Shopova, M.; Sturdy, J.; Sultanov, G.; Swain, S. K.; Szillasi, Z.; Talvitie, J.; Tatarinov, A.; Tuuva, T.; Tytgat, M.; Vai, I.; Van Stenis, M.; Venditti, R.; Verhagen, E.; Verwilligen, P.; Vitulo, P.; Volkov, S.; Vorobyev, A.; Wang, D.; Wang, M.; Yang, U.; Yang, Y.; Yonamine, R.; Zaganidis, N.; Zenoni, F.; Zhang, A.

2018-02-01

The CMS Collaboration plans to equip the very forward muon system with triple-GEM detectors that can withstand the environment of the High-Luminosity LHC. This project is at the final stages of R&D and moving to production. An unprecedented large area of several 100 m2 are to be instrumented with GEM detectors which will be produced in six different sites around the world. A common construction and quality control procedure is required to ensure the performance of each detector. The quality control steps will include optical inspection, cleaning and baking of all materials and parts used to build the detector, leakage current tests of the GEM foils, high voltage tests, gas leak tests of the chambers and monitoring pressure drop vs. time, gain calibration to know the optimal operation region of the detector, gain uniformity tests, and studying the efficiency, noise and tracking performance of the detectors in a cosmic stand using scintillators.

Multi-component determination and chemometric analysis of Paris polyphylla by ultra high performance liquid chromatography with photodiode array detection.

PubMed

Chen, Pei; Jin, Hong-Yu; Sun, Lei; Ma, Shuang-Cheng

2016-09-01

Multi-source analysis of traditional Chinese medicine is key to ensuring its safety and efficacy. Compared with traditional experimental differentiation, chemometric analysis is a simpler strategy to identify traditional Chinese medicines. Multi-component analysis plays an increasingly vital role in the quality control of traditional Chinese medicines. A novel strategy, based on chemometric analysis and quantitative analysis of multiple components, was proposed to easily and effectively control the quality of traditional Chinese medicines such as Chonglou. Ultra high performance liquid chromatography was more convenient and efficient. Five species of Chonglou were distinguished by chemometric analysis and nine saponins, including Chonglou saponins I, II, V, VI, VII, D, and H, as well as dioscin and gracillin, were determined in 18 min. The method is feasible and credible, and enables to improve quality control of traditional Chinese medicines and natural products. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Human High Temperature Requirement Serine Protease A1 (HTRA1) Degrades Tau Protein Aggregates*

PubMed Central

Tennstaedt, Annette; Pöpsel, Simon; Truebestein, Linda; Hauske, Patrick; Brockmann, Anke; Schmidt, Nina; Irle, Inga; Sacca, Barbara; Niemeyer, Christof M.; Brandt, Roland; Ksiezak-Reding, Hanna; Tirniceriu, Anca Laura; Egensperger, Rupert; Baldi, Alfonso; Dehmelt, Leif; Kaiser, Markus; Huber, Robert; Clausen, Tim; Ehrmann, Michael

2012-01-01

Protective proteases are key elements of protein quality control pathways that are up-regulated, for example, under various protein folding stresses. These proteases are employed to prevent the accumulation and aggregation of misfolded proteins that can impose severe damage to cells. The high temperature requirement A (HtrA) family of serine proteases has evolved to perform important aspects of ATP-independent protein quality control. So far, however, no HtrA protease is known that degrades protein aggregates. We show here that human HTRA1 degrades aggregated and fibrillar tau, a protein that is critically involved in various neurological disorders. Neuronal cells and patient brains accumulate less tau, neurofibrillary tangles, and neuritic plaques, respectively, when HTRA1 is expressed at elevated levels. Furthermore, HTRA1 mRNA and HTRA1 activity are up-regulated in response to elevated tau concentrations. These data suggest that HTRA1 is performing regulated proteolysis during protein quality control, the implications of which are discussed. PMID:22535953

Simultaneous Determination of Ten Constituents in Chaiqin Qingning Capsule by High-performance Liquid Chromatography Coupled with Triple-quadrupole Mass Spectrometry

PubMed Central

Li, Ting Yu; Huo, Xiao Kui; Zheng, Lu; Wang, Chao; Cong, Hai Jian; Xiang, Ting; Zhang, Lin; Zhang, Bao Jing; Huang, Shan Shan; Wu, Bin; Li, Xin Yu

2017-01-01

Background: Chaiqin Qingning Capsule (CQQNC) was a prescription of Traditional Chinese Medicine with the effects of clearing away heat and removing toxin, harmonizing the exterior and interior, it was widely used in Asian, for example, China and Japan, different batches of the raws materials and different processing time may be the vital factor which raised a challenge to control the quality of the CQQNC. Experimental Methods: In this experiment, a high-performance liquid chromatography-mass spectrometry/MS (HPLC-MS/MS) method was developed to simultaneously determine ten bioactive components for the quality control of CQQNC. Chromatographic separation was achieved using an XBridge BEH C18 column (150 mm × 4.6 mm, 2.5 μm) with a mobile phase composed of 10 mm aqueous ammonium acetate and acetonitrile using a gradient elution in 20 min. This study was conducted by multiple reaction monitoring mode through electrospray ionization resource with a negative ionization mode. Results: The established method was validated with good performance of precision, accuracy, stability, and reproducibility and was utilized to simultaneously quantify ten constituents of CQQNC obtained from seven different batches. Conclusion: It is the first time to report the rapid and simultaneous analysis of the ten compounds in CQQNC by HPLC-MS/MS and apply to determine 10 constituents in 7 batches of CQQNC bought from drug store in china. This method could be considered as good quality criteria to control the quality of CQQNC. SUMMARY In this paper, a simple, specific, and rapid high-performance liquid chromatogram coupled with triple-quadrupole mass spectrometry method for simultaneous quantification of ten constituents in Chaiqin Qingning Capsule has been developed for the first time. This method could be considered as good quality criteria to control the quality of CQQNC. Abbreviations used: CHM: Chinese herbal medicine; TCM: Traditional Chinese Medicine; CQQNC: Triple-quadrupole mass spectrometry Chaiqin Qingning Capsules; HPLC–MS/MS: High liquid chromatography equipped with tandem mass spectrometry; ESI: Electrospray ionization; DP: Declustering potential; CE: Collision energy; RSD: Relative standard deviation; LOD: Limit of detection; LOQ: Limit of quantity. PMID:29200714

Simultaneous Determination of Ten Constituents in Chaiqin Qingning Capsule by High-performance Liquid Chromatography Coupled with Triple-quadrupole Mass Spectrometry.

PubMed

Li, Ting Yu; Huo, Xiao Kui; Zheng, Lu; Wang, Chao; Cong, Hai Jian; Xiang, Ting; Zhang, Lin; Zhang, Bao Jing; Huang, Shan Shan; Wu, Bin; Li, Xin Yu

2017-01-01

Chaiqin Qingning Capsule (CQQNC) was a prescription of Traditional Chinese Medicine with the effects of clearing away heat and removing toxin, harmonizing the exterior and interior, it was widely used in Asian, for example, China and Japan, different batches of the raws materials and different processing time may be the vital factor which raised a challenge to control the quality of the CQQNC. In this experiment, a high-performance liquid chromatography-mass spectrometry/MS (HPLC-MS/MS) method was developed to simultaneously determine ten bioactive components for the quality control of CQQNC. Chromatographic separation was achieved using an XBridge BEH C18 column (150 mm × 4.6 mm, 2.5 μm) with a mobile phase composed of 10 mm aqueous ammonium acetate and acetonitrile using a gradient elution in 20 min. This study was conducted by multiple reaction monitoring mode through electrospray ionization resource with a negative ionization mode. The established method was validated with good performance of precision, accuracy, stability, and reproducibility and was utilized to simultaneously quantify ten constituents of CQQNC obtained from seven different batches. It is the first time to report the rapid and simultaneous analysis of the ten compounds in CQQNC by HPLC-MS/MS and apply to determine 10 constituents in 7 batches of CQQNC bought from drug store in china. This method could be considered as good quality criteria to control the quality of CQQNC. In this paper, a simple, specific, and rapid high-performance liquid chromatogram coupled with triple-quadrupole mass spectrometry method for simultaneous quantification of ten constituents in Chaiqin Qingning Capsule has been developed for the first time. This method could be considered as good quality criteria to control the quality of CQQNC. Abbreviations used: CHM: Chinese herbal medicine; TCM: Traditional Chinese Medicine; CQQNC: Triple-quadrupole mass spectrometry Chaiqin Qingning Capsules; HPLC-MS/MS: High liquid chromatography equipped with tandem mass spectrometry; ESI: Electrospray ionization; DP: Declustering potential; CE: Collision energy; RSD: Relative standard deviation; LOD: Limit of detection; LOQ: Limit of quantity.

Quality controls for wind measurement of a 1290-MHz boundary layer profiler under strong wind conditions.

PubMed

Liu, Zhao; Zheng, Chaorong; Wu, Yue

2017-09-01

Wind profilers have been widely adopted to observe the wind field information in the atmosphere for different purposes. But accuracy of its observation has limitations due to various noises or disturbances and hence need to be further improved. In this paper, the data measured under strong wind conditions, using a 1290-MHz boundary layer profiler (BLP), are quality controlled via a composite quality control (QC) procedure proposed by the authors. Then, through the comparison with the data measured by radiosonde flights (balloon observations), the critical thresholds in the composite QC procedure, including consensus average threshold T 1 and vertical shear threshold T 3 , are systematically discussed. And the performance of the BLP operated under precipitation is also evaluated. It is found that to ensure the high accuracy and high data collectable rate, the optimal range of subsets is determined to be 4 m/s. Although the number of data rejected by the combined algorithm of vertical shear examination and small median test is quite limited, it is proved that the algorithm is quite useful to recognize the outlier with a large discrepancy. And the optimal wind shear threshold T 3 can be recommended as 5 ms -1 /100m. During patchy precipitation, the quality of data measured by the four oblique beams (using the DBS measuring technique) can still be ensured. After the BLP data are quality controlled by the composite QC procedure, the output can show good agreement with the balloon observation.

Alcohol-specific parenting, adolescents' self-control, and alcohol use: a moderated mediation model.

PubMed

Koning, Ina M; van den Eijnden, Regina J J M; Vollebergh, Wilma A M

2014-01-01

There is convincing evidence that parental rules about alcohol are important in curbing adolescents' alcohol use. However, little is known about the mechanisms through which the direct link between alcohol-specific parenting and alcohol use is obtained. In this study, we investigated the mediating effect of adolescent self-control on the relationship between alcohol-specific rules and adolescents' drinking behavior and whether this mediation effect depends on the level of quality of communication. A total of 883 adolescents participated in this longitudinal study at ages 13, 14, and 15 years. Strict rules predicted lower rates of drinking, but no direct effect of the quality of communication on adolescents' alcohol use was found. A higher level of self-control was related to lower rates of drinking in adolescents. The indirect effect of rules about alcohol through adolescents' self-control was statistically significant, yet only in adolescents with high qualitative parent-child communication about alcohol. In adolescents with low quality of parent-child communication, self-control was not related to drinking. These findings imply that strict rule setting in combination with qualitative parent-child communication is an important target for prevention. In addition, findings point at the importance of high qualitative parent-child communication for adolescents' motivation to engage in self-control to avoid drinking.

Drop-on-Demand System for Manufacturing of Melt-based Solid Oral Dosage: Effect of Critical Process Parameters on Product Quality.

PubMed

Içten, Elçin; Giridhar, Arun; Nagy, Zoltan K; Reklaitis, Gintaras V

2016-04-01

The features of a drop-on-demand-based system developed for the manufacture of melt-based pharmaceuticals have been previously reported. In this paper, a supervisory control system, which is designed to ensure reproducible production of high quality of melt-based solid oral dosages, is presented. This control system enables the production of individual dosage forms with the desired critical quality attributes: amount of active ingredient and drug morphology by monitoring and controlling critical process parameters, such as drop size and product and process temperatures. The effects of these process parameters on the final product quality are investigated, and the properties of the produced dosage forms characterized using various techniques, such as Raman spectroscopy, optical microscopy, and dissolution testing. A crystallization temperature control strategy, including controlled temperature cycles, is presented to tailor the crystallization behavior of drug deposits and to achieve consistent drug morphology. This control strategy can be used to achieve the desired bioavailability of the drug by mitigating variations in the dissolution profiles. The supervisor control strategy enables the application of the drop-on-demand system to the production of individualized dosage required for personalized drug regimens.

Controllability of Complex Dynamic Objects

NASA Astrophysics Data System (ADS)

Kalach, G. G.; Kazachek, N. A.; Morozov, A. A.

2017-01-01

Quality requirements for mobile robots intended for both specialized and everyday use are increasing in step with the complexity of the technological tasks assigned to the robots. Whether a mobile robot is for ground, aerial, or underwater use, the relevant quality characteristics can be summarized under the common concept of agility. This term denotes the object’s (the robot)’s ability to react quickly to control actions (change speed and direction), turn in a limited area, etc. When using this approach in integrated assessment of the quality characteristics of an object with the control system, it seems more constructive to use the term “degree of control”. This paper assesses the degree of control by an example of a mobile robot with the variable-geometry drive wheel axle. We show changes in the degree of control depending on the robot’s configuration, and results illustrated by calculation data, computer and practical experiments. We describe the prospects of using intelligent technology for efficient control of objects with a high degree of controllability.

Quality of natural product clinical trials: a comparison of those published in alternative medicine versus conventional medicine journals.

PubMed

Cochrane, Zara Risoldi; Gregory, Philip; Wilson, Amy

2011-06-01

To compare the quality of natural product clinical trials published in alternative medicine journals versus those published in conventional medicine journals. Systematic search and review of the literature. Randomized controlled trials of natural products were included if they were published in English between 2003 and 2008. Articles were categorized by their journal of publication (alternative medicine versus conventional medicine). Two independent reviewers evaluated study quality using guidelines from the Cochrane Collaboration. The results with respect to the primary outcome (positive or negative) were also assessed. Thirty articles were evaluated, 15 published in alternative medicine journals and 15 in conventional medicine journals. Of articles published in alternative medicine journals, 33.33% (n = 5) were considered low quality, and none were considered high quality. Of articles published in conventional medicine journals, 26.67% (n = 4) were considered low quality and 6.67% (n = 1) were considered high quality. Two thirds of all trials reviewed were of unclear quality, due to inadequate reporting of information relating to the study's methodology. Similar proportions of positive and negative primary outcomes were found in alternative and conventional medicine journals, and low-quality articles were not more likely to report a positive primary outcome (Fisher's exact test, two-tailed p = .287). The quality of natural product randomized controlled trials was similar among alternative and conventional medicine journals. Efforts should be made to improve the reporting of natural product clinical trials for accurate determinations of study quality to be possible.

El Nino impacts on seasonal high ozone levels in the lower troposphere

DOE Office of Scientific and Technical Information (OSTI.GOV)

Linse, E.W. Jr.

The purpose of this paper is to clarify one difficulty in evaluating the control strategies for ozone concentrations. El Nino years may be mistakenly interpreted as periods having improved air quality because of those control programs. In fact, the differences in atmospheric stability and mixing have made some years especially benign for air quality. Improvements or the effectiveness of control programs can only be effectively reviewed if the meteorological signature is removed. It may not be generally known how large the impacts of the El Nino conditions can be.

Factors associated with high-quality/low-cost hospital performance.

PubMed

Jiang, H Joanna; Friedman, Bernard; Begun, James W

2006-01-01

This study explores organizational and market characteristics associated with superior hospital performance in both quality and cost of care, using the Healthcare Cost and Utilization Project State Inpatient Databases for ten states in 1997 and 2001. After controlling for a variety of patient factors, we found that for-profit ownership, hospital competition, and the number of HMOs were positively associated with the likelihood of attaining high-quality/low-cost performance. Furthermore, we examined interactions between organizational and market characteristics and identified a number of significant interactions. For example, the positive likelihood associated with for-profit hospitals diminished in markets with high HMO penetration.

Social Media Use, Friendship Quality, and the Moderating Role of Anxiety in Adolescents with Autism Spectrum Disorder.

PubMed

van Schalkwyk, Gerrit I; Marin, Carla E; Ortiz, Mayra; Rolison, Max; Qayyum, Zheala; McPartland, James C; Lebowitz, Eli R; Volkmar, Fred R; Silverman, Wendy K

2017-09-01

Social media holds promise as a technology to facilitate social engagement, but may displace offline social activities. Adolescents with ASD are well suited to capitalize on the unique features of social media, which requires less decoding of complex social information. In this cross-sectional study, we assessed social media use, anxiety and friendship quality in 44 adolescents with ASD, and 56 clinical comparison controls. Social media use was significantly associated with high friendship quality in adolescents with ASD, which was moderated by the adolescents' anxiety levels. No associations were founds between social media use, anxiety and friendship quality in the controls. Social media may be a way for adolescents with ASD without significant anxiety to improve the quality of their friendships.

[Application of THz technology to nondestructive detection of agricultural product quality].

PubMed

Jiang, Yu-ying; Ge, Hong-yi; Lian, Fei-yu; Zhang, Yuan; Xia, Shan-hong

2014-08-01

With recent development of THz sources and detector, applications of THz radiation to nondestructive testing and quality control have expanded in many fields, such as agriculture, safety inspection and quality control, medicine, biochemistry, communication etc. Compared with other detection technique, being a new kind of technique, THz radiation has low energy, good perspectivity, and high signal-to-noise ratio, and thus can obtain physical, chemical and biological information. This paper first introduces the basic concept of THz radiation and the major properties, then gives an extensive review of recent research progress in detection of the quality of agricultural products via THz technique, analyzes the existing shortcomings of THz detection and discusses the outlook of potential application, finally proposes the new application of THz technique to detection of quality of stored grain.

New CVD-based method for the growth of high-quality crystalline zinc oxide layers

NASA Astrophysics Data System (ADS)

Huber, Florian; Madel, Manfred; Reiser, Anton; Bauer, Sebastian; Thonke, Klaus

2016-07-01

High-quality zinc oxide (ZnO) layers were grown using a new chemical vapour deposition (CVD)-based low-cost growth method. The process is characterized by total simplicity, high growth rates, and cheap, less hazardous precursors. To produce elementary zinc vapour, methane (CH4) is used to reduce a ZnO powder. By re-oxidizing the zinc with pure oxygen, highly crystalline ZnO layers were grown on gallium nitride (GaN) layers and on sapphire substrates with an aluminum nitride (AlN) nucleation layer. Using simple CH4 as precursor has the big advantage of good controllability and the avoidance of highly toxic gases like nitrogen oxides. In photoluminescence (PL) measurements the samples show a strong near-band-edge emission and a sharp line width at 5 K. The good crystal quality has been confirmed in high resolution X-ray diffraction (HRXRD) measurements. This new growth method has great potential for industrial large-scale production of high-quality single crystal ZnO layers.

Topical capsaicin (high concentration) for chronic neuropathic pain in adults.

PubMed

Derry, Sheena; Rice, Andrew Sc; Cole, Peter; Tan, Toni; Moore, R Andrew

2017-01-13

This review is an update of 'Topical capsaicin (high concentration) for chronic neuropathic pain in adults' last updated in Issue 2, 2013. Topical creams with capsaicin are used to treat peripheral neuropathic pain. Following application to the skin, capsaicin causes enhanced sensitivity, followed by a period with reduced sensitivity and, after repeated applications, persistent desensitisation. High-concentration (8%) capsaicin patches were developed to increase the amount of capsaicin delivered; rapid delivery was thought to improve tolerability because cutaneous nociceptors are 'defunctionalised' quickly. The single application avoids noncompliance. Only the 8% patch formulation of capsaicin is available, with a capsaicin concentration about 100 times greater than conventional creams. High-concentration topical capsaicin is given as a single patch application to the affected part. It must be applied under highly controlled conditions, often following local anaesthetic, due to the initial intense burning sensation it causes. The benefits are expected to last for about 12 weeks, when another application might be made. To review the evidence from controlled trials on the efficacy and tolerability of topically applied, high-concentration (8%) capsaicin in chronic neuropathic pain in adults. For this update, we searched CENTRAL, MEDLINE, Embase, two clinical trials registries, and a pharmaceutical company's website to 10 June 2016. Randomised, double-blind, placebo-controlled studies of at least 6 weeks' duration, using high-concentration (5% or more) topical capsaicin to treat neuropathic pain. Two review authors independently searched for studies, extracted efficacy and adverse event data, and examined issues of study quality and potential bias. Where pooled analysis was possible, we used dichotomous data to calculate risk ratio and numbers needed to treat for one additional event, using standard methods.Efficacy outcomes reflecting long-duration pain relief after a single drug application were from the Patient Global Impression of Change (PGIC) at specific points, usually 8 and 12 weeks. We also assessed average pain scores over weeks 2 to 8 and 2 to 12 and the number of participants with pain intensity reduction of at least 30% or at least 50% over baseline, and information on adverse events and withdrawals.We assessed the quality of the evidence using GRADE and created a 'Summary of findings' table. We included eight studies, involving 2488 participants, two more studies and 415 more participants than the previous version of this review. Studies were of generally good methodological quality; we judged only one study at high risk of bias, due to small size. Two studies used a placebo control and six used 0.04% topical capsaicin as an 'active' placebo to help maintain blinding. Efficacy outcomes were inconsistently reported, resulting in analyses for most outcomes being based on less than complete data.For postherpetic neuralgia, we found four studies (1272 participants). At both 8 and 12 weeks about 10% more participants reported themselves much or very much improved with high-concentration capsaicin than with 'active' placebo, with point estimates of numbers needed to treat for an additional beneficial outcome (NNTs) of 8.8 (95% confidence interval (CI) 5.3 to 26) with high-concentration capsaicin and 7.0 (95% CI 4.6 to 15) with 'active' placebo (2 studies, 571 participants; moderate quality evidence). More participants (about 10%) had average 2 to 8-week and 2 to 12-week pain intensity reductions over baseline of at least 30% and at least 50% with capsaicin than control, with NNT values between 10 and 12 (2 to 4 studies, 571 to 1272 participants; very low quality evidence).For painful HIV-neuropathy, we found two studies (801 participants). One study reported the proportion of participants who were much or very much improved at 12 weeks (27% with high-concentration capsaicin and 10% with 'active' placebo). For both studies, more participants (about 10%) had average 2 to 12-week pain intensity reductions over baseline of at least 30% with capsaicin than control, with an NNT of 11 (very low quality evidence).For peripheral diabetic neuropathy, we found one study (369 participants). It reported about 10% more participants who were much or very much improved at 8 and 12 weeks. One small study of 46 participants with persistent pain following inguinal herniorrhaphy did not show a difference between capsaicin and placebo for pain reduction (very low quality evidence).We downgraded the quality of the evidence for efficacy outcomes by one to three levels due to sparse data, imprecision, possible effects of imputation methods, and susceptibility to publication bias.Local adverse events were common, but not consistently reported. Serious adverse events were no more common with active treatment (3.5%) than control (3.2%). Adverse event withdrawals did not differ between groups, but lack of efficacy withdrawals were somewhat more common with control than active treatment, based on small numbers of events (six to eight studies, 21 to 67 events; moderate quality evidence, downgraded due to few events). No deaths were judged to be related to study medication. High-concentration topical capsaicin used to treat postherpetic neuralgia, HIV-neuropathy, and painful diabetic neuropathy generated more participants with moderate or substantial levels of pain relief than control treatment using a much lower concentration of capsaicin. These results should be interpreted with caution as the quality of the evidence was moderate or very low. The additional proportion who benefited over control was not large, but for those who did obtain high levels of pain relief, there were usually additional improvements in sleep, fatigue, depression, and quality of life. High-concentration topical capsaicin is similar in its effects to other therapies for chronic pain.

Application of the Critical Success Factor Methodology to DoD Organization.

DTIC Science & Technology

1984-09-01

high technology manufacturing, banking, airline, insurance, railway, and automobile . Sullen (6t22-25) lists the current CSFs of the 14 S automobile ...industry as image, quality dealer system, cost control, and meting energy standards. However, in 1981 the automobile CSFs included only styling, quality...bearing on current car purchases as well as future car buys. And finally cost control influenced the auto industry as a CSF, since profit per automobile had

[Methodological quality and reporting quality evaluation of randomized controlled trials published in China Journal of Chinese Materia Medica].

PubMed

Yu, Dan-Dan; Xie, Yan-Ming; Liao, Xing; Zhi, Ying-Jie; Jiang, Jun-Jie; Chen, Wei

2018-02-01

To evaluate the methodological quality and reporting quality of randomized controlled trials(RCTs) published in China Journal of Chinese Materia Medica, we searched CNKI and China Journal of Chinese Materia webpage to collect RCTs since the establishment of the magazine. The Cochrane risk of bias assessment tool was used to evaluate the methodological quality of RCTs. The CONSORT 2010 list was adopted as reporting quality evaluating tool. Finally, 184 RCTs were included and evaluated methodologically, of which 97 RCTs were evaluated with reporting quality. For the methodological evaluating, 62 trials(33.70%) reported the random sequence generation; 9(4.89%) trials reported the allocation concealment; 25(13.59%) trials adopted the method of blinding; 30(16.30%) trials reported the number of patients withdrawing, dropping out and those lost to follow-up;2 trials （1.09%） reported trial registration and none of the trial reported the trial protocol; only 8(4.35%) trials reported the sample size estimation in details. For reporting quality appraising, 3 reporting items of 25 items were evaluated with high-quality,including: abstract, participants qualified criteria, and statistical methods; 4 reporting items with medium-quality, including purpose, intervention, random sequence method, and data collection of sites and locations; 9 items with low-quality reporting items including title, backgrounds, random sequence types, allocation concealment, blindness, recruitment of subjects, baseline data, harms, and funding;the rest of items were of extremely low quality(the compliance rate of reporting item<10%). On the whole, the methodological and reporting quality of RCTs published in the magazine are generally low. Further improvement in both methodological and reporting quality for RCTs of traditional Chinese medicine are warranted. It is recommended that the international standards and procedures for RCT design should be strictly followed to conduct high-quality trials. At the same time, in order to improve the reporting quality of randomized controlled trials, CONSORT standards should be adopted in the preparation of research reports and submissions. Copyright© by the Chinese Pharmaceutical Association.

The MAREDAT Global Database of High Performance Liquid Chromatography Marine Pigment Measurements

NASA Technical Reports Server (NTRS)

Peloquin, J.; Swan, C.; Gruber, N.; Vogt, M.; Claustre, H.; Ras, J.; Uitz, J.; Barlow, R.; Behrenfeld, M.; Bidigare, R.;

Delay Discounting Mediates Parent-Adolescent Relationship Quality and Risky Sexual Behavior for Low Self-Control Adolescents.

PubMed

Kahn, Rachel E; Holmes, Christopher; Farley, Julee P; Kim-Spoon, Jungmeen

2015-09-01

Parent-adolescent relationship quality and delay discounting may play important roles in adolescents' sexual decision making processes, and levels of self-control during adolescence could act as a buffer within these factors. This longitudinal study included 219 adolescent (55 % male; mean age = 12.66 years at Wave 1; mean age = 15.10 years at Wave 2) and primary caregiver dyads. Structural equation modeling (SEM) was utilized to determine whether delay discounting mediated the association between parent-adolescent relationship quality and adolescents' risky sexual behavior and how this mediated association may differ between those with high versus low self-control. The results revealed parent-adolescent relationship quality plays a role in the development of risky sexual behavior indirectly through levels of delay discounting, but only for adolescents with low self-control. These findings could inform sex education policies and health prevention programs that address adolescent risky sexual behavior.

Interaction between bacterial outer membrane proteins and periplasmic quality control factors: a kinetic partitioning mechanism.

PubMed

Wu, Si; Ge, Xi; Lv, Zhixin; Zhi, Zeyong; Chang, Zengyi; Zhao, Xin Sheng

2011-09-15

The OMPs (outer membrane proteins) of Gram-negative bacteria have to be translocated through the periplasmic space before reaching their final destination. The aqueous environment of the periplasmic space and high permeability of the outer membrane engender such a translocation process inevitably challenging. In Escherichia coli, although SurA, Skp and DegP have been identified to function in translocating OMPs across the periplasm, their precise roles and their relationship remain to be elucidated. In the present paper, by using fluorescence resonance energy transfer and single-molecule detection, we have studied the interaction between the OMP OmpC and these periplasmic quality control factors. The results of the present study reveal that the binding rate of OmpC to SurA or Skp is much faster than that to DegP, which may lead to sequential interaction between OMPs and different quality control factors. Such a kinetic partitioning mechanism for the chaperone-substrate interaction may be essential for the quality control of the biogenesis of OMPs.

Controllable Synthesis of Highly Luminescent Boron Nitride Quantum Dots.

PubMed

Li, Hongling; Tay, Roland Yingjie; Tsang, Siu Hon; Zhen, Xu; Teo, Edwin Hang Tong

2015-12-22

Boron nitride quantum dots (BNQDs), as a new member of heavy metal-free quantum dots, have aroused great interest in fundamental research and practical application due to their unique physical/chemical properties. However, it is still a challenge to controllably synthesize high-quality BNQDs with high quantum yield (QY), uniform size and strong fluorescent. In this work, BNQDs have been successfully fabricated by the liquid exfoliation and the subsequent solvothermal process with respect to its facileness and easy large scale up. Importantly, BNQDs with high-quality can be controllably obtained by adjusting the synthetic parameters involved in the solvothermal process including filling factor, synthesis temperature, and duration time. Encouragingly, the as-prepared BNQDs possess strong blue luminescence with QY as high as 19.5%, which can be attributed to the synergetic effect of size, surface chemistry and edge defects. In addition, this strategy presented here provides a new reference for the controllable synthesis of other heavy metal-free QDs. Furthermore, the as-prepared BNQDs are non-toxic to cells and exhibit nanosecond-scaled lifetimes, suggesting they have great potential biological and optoelectronic applications. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Social relationships in young adults at ultra high risk for psychosis.

PubMed

Robustelli, Briana L; Newberry, Raeana E; Whisman, Mark A; Mittal, Vijay A

2017-01-01

Studies suggest that individuals with schizophrenia have smaller social networks and less satisfying relationships. However, much is still unknown about the typical quantity and quality of social relationships in young adults during the ultra high-risk (UHR) period. Investigating these relationships holds significant importance for improving understanding of etiological processes, mapping the social environment, and highlighting treatment targets in a critical period. A total of 85 participants (44 UHR and 41 healthy controls) completed measures examining the participants' social relationships, social support, and loneliness. Mean differences between the UHR and healthy control participants and associations between social relationships and symptoms and functioning were examined. Results indicated significant differences between groups on several indices. Specifically, the UHR youth reported fewer close friends, less diverse social networks, less perceived social support, poorer relationship quality with family and friends, and more loneliness. Notably, within the UHR group, being lonely and having fewer and worse quality relationships was associated with greater symptom severity and lower overall functioning. This study suggests that youth at high-risk of developing psychosis have fewer and poorer quality social relationships. Interventions that focus on increasing the quantity and quality of young adults' social networks may be beneficial for this population. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Managing Vocabulary Mapping Services

PubMed Central

Che, Chengjian; Monson, Kent; Poon, Kasey B.; Shakib, Shaun C.; Lau, Lee Min

2005-01-01

The efficient management and maintenance of large-scale and high-quality vocabulary mapping is an operational challenge. The 3M Health Information Systems (HIS) Healthcare Data Dictionary (HDD) group developed an information management system to provide controlled mapping services, resulting in improved efficiency and quality maintenance. PMID:16779203

Quality of information sources about mental disorders: a comparison of Wikipedia with centrally controlled web and printed sources.

PubMed

Reavley, N J; Mackinnon, A J; Morgan, A J; Alvarez-Jimenez, M; Hetrick, S E; Killackey, E; Nelson, B; Purcell, R; Yap, M B H; Jorm, A F

2012-08-01

Although mental health information on the internet is often of poor quality, relatively little is known about the quality of websites, such as Wikipedia, that involve participatory information sharing. The aim of this paper was to explore the quality of user-contributed mental health-related information on Wikipedia and compare this with centrally controlled information sources. Content on 10 mental health-related topics was extracted from 14 frequently accessed websites (including Wikipedia) providing information about depression and schizophrenia, Encyclopaedia Britannica, and a psychiatry textbook. The content was rated by experts according to the following criteria: accuracy, up-to-dateness, breadth of coverage, referencing and readability. Ratings varied significantly between resources according to topic. Across all topics, Wikipedia was the most highly rated in all domains except readability. The quality of information on depression and schizophrenia on Wikipedia is generally as good as, or better than, that provided by centrally controlled websites, Encyclopaedia Britannica and a psychiatry textbook.

Quality control and improvement of cancer care: what is needed? 4th European Roundtable Meeting (ERTM) May 5th, 2017, Berlin, Germany.

PubMed

Ortmann, Olaf; Helbig, Ulrike; Torode, Julie; Schreck, Stefan; Karjalainen, Sakari; Bettio, Manola; Ringborg, Ulrik; Klinkhammer-Schalke, Monika; Bray, Freddy

2018-06-01

National Cancer Control Plans (NCCPs) often describe structural requirements for high quality cancer care. During the fourth European Roundtable Meeting (ERTM) participants shared learnings from their own national setting to formulate best practice in optimizing communication strategies between parties involved in clinical cancer registries, cancer centers and guideline groups. A decentralized model of data collection close to the patient and caregiver enhances timely completion and the quality of the data captured. Nevertheless, central coordination is necessary to define datasets, indicators, standard settings, education, training and quality control to maintain standards across the network. In particular, interaction of parties in cancer care network has to be established and maintained on a regular basis. After establishing the structural requirements of cancer care networks, communication between the different components and parties is required to analyze outcome data, provide regular reporting to all and develop strategies for continuous improvement of quality across the network.

Quality evaluation of Hypericum ascyron extract by two-dimensional high-performance liquid chromatography coupled with the colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method.

PubMed

Li, Xiu-Mei; Luo, Xue-Gang; Zhang, Chao-Zheng; Wang, Nan; Zhang, Tong-Cun

2015-02-01

In this paper, a heart-cutting two-dimensional high-performance liquid chromatography coupled with the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method was established for controlling the quality of different batches of Hypericum ascyron extract for the first time. In comparison with the common one-dimensional fingerprint, the second-dimensional fingerprint compiled additional spectral data and was hence more informative. The quality of H. ascyron extract was further evaluated by similarity measures and the same results were achieved, the correlation coefficients of the similarity of ten batches of H. ascyron extract were ＞0.99. Furthermore, we also evaluated the quality of the ten batches of H. ascyron extract by antibacterial activity. The result demonstrated that the quality of the ten batches of H. ascyron extract was not significantly different by MTT. Finally, we demonstrated that the second-dimensional fingerprint coupled with the MTT method was a more powerful tool to characterize the quality of samples of batch to batch. Therefore the proposed method could be used to comprehensively conduct the quality control of traditional Chinese medicines. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

[Phantom studies of ultrasound equipment for quality improvement in breast diagnosis].

PubMed

Madjar, H; Mundinger, A; Lattermann, U; Gufler, H; Prömpeler, H J

1996-04-01

According to the German guidelines for quality control of ultrasonic equipment, the following conditions are required for breast ultrasound: A transducer frequency between 5-7.5 MHz and a minimum field of view of 5 cm. Satisfactory images must be obtained in a depth between 0.5 and 4 cm with a wide tolerance of the focal zones. This allows the use of poor quality equipment which does not produce satisfactory image quality and it excludes a number of high frequency and high resolution transducers with a field of view below 5 cm. This study with a test phantom was performed to define image quality objectively. Sixteen ultrasound instruments in different price categories were used to perform standardized examinations on a breast phantom model 550 (ATS Laboratories, Bridgeport, USA). Contrast and spatial resolution in different penetration depths were investigated on cyst phantoms from 1-4 mm diameter and wire targets with defined distances between 0.5-3 mm 4 investigations reported the images. A positive correlation was seen between price category and image quality. This study demonstrates that transducer frequency and image geometry do not allow sufficient quality control. An improvement of ultrasound diagnosis is only possible if equipment guidelines are based on standard examinations with test phantoms.

Evaluating signal and noise spectral density of a qPlus sensor with an active feedback control

NASA Astrophysics Data System (ADS)

Lee, Manhee; An, Sangmin; Jhe, Wonho

2018-05-01

Q-control technique enables to actively change the quality factor of the probe oscillation in dynamic atomic force microscopy. The Q-control is realized by adding a self-feedback loop into the original actuation-detection system, in which a damping force with controllable damping coefficient in magnitude and sign is applied to the oscillating probe. While the applied force alters the total damping interaction and thus the overall `signal' of the probe motion, the added feedback system changes the `noise' of the motion as well. Here, we systematically investigate the signal, the noise, and the signal-to-noise ratio of the qPlus sensor under the active Q-control. We quantify the noise of the qPlus motion by measuring the noise spectral density, which is reproduced by a harmonic oscillator model including the thermal and the measurement noises. We show that the noise signal increases with the quality factor controlled, scaling as the square root of the quality factor. Because the overall signal is linearly proportional to the quality factor, the signal-to-noise ratio scales as the square root of the quality factor. The Q-controlled qPlus with a highly enhanced Q, up to 10,000 in air, leads to the minimum detectable force gradient of 0.001 N/m, which would enhance the capability of the qPlus sensor for atomic force microscopy and spectroscopy.

Methodological and Reporting Quality of Comparative Studies Evaluating Health-Related Quality of Life of Colorectal Cancer Patients and Controls: A Systematic Review.

PubMed

Wong, Carlos K H; Guo, Vivian Y W; Chen, Jing; Lam, Cindy L K

2016-11-01

Health-related quality of life is an important outcome measure in patients with colorectal cancer. Comparison with normative data has been increasingly undertaken to assess the additional impact of colorectal cancer on health-related quality of life. This review aimed to critically appraise the methodological details and reporting characteristics of comparative studies evaluating differences in health-related quality of life between patients and controls. A systematic search of English-language literature published between January 1985 and May 2014 was conducted through a database search of PubMed, Web of Science, Embase, and Medline. Comparative studies reporting health-related quality-of-life outcomes among patients who have colorectal cancer and controls were selected. Methodological and reporting quality per comparison study was evaluated based on a 11-item methodological checklist proposed by Efficace in 2003 and a set of criteria predetermined by reviewers. Thirty-one comparative studies involving >10,000 patients and >10,000 controls were included. Twenty-three studies (74.2%) originated from European countries, with the largest number from the Netherlands (n = 6). Twenty-eight studies (90.3%) compared the health-related quality of life of patients with normative data published elsewhere, whereas the remaining studies recruited a group of patients who had colorectal cancer and a group of control patients within the same studies. The European Organisation for Research and Treatment of Cancer Quality-of-Life Questionnaire Core 30 was the most extensively used instrument (n = 16; 51.6%). Eight studies (25.8%) were classified as "probably robust" for clinical decision making according to the Efficace standard methodological checklist. Our further quality assessment revealed the lack of score differences reported (61.3%), contemporary comparisons (36.7%), statistical significance tested (38.7%), and matching of control group (58.1%), possibly leading to inappropriate control groups for fair comparisons. Meta-analysis of differences between the 2 groups was not available. In general, one-fourth of comparative studies that evaluated health-related quality of life of patients who had colorectal cancer achieved high quality in reporting characteristics and methodological details. Future studies are encouraged to undertake health-related quality-of-life measurement and adhere to a methodological checklist in comparison with controls.

[Application of fingerprint chromatogram in quality control of Shen-Mai injection].

PubMed

Shi, Xian-zhe; Yang, Jun; Zhao, Chun-xia; Xiong, Jian-hui; Xu, Guo-wang

2002-07-01

The theory and practice of traditional Chinese medicine require some comprehensive methods to assess quality of the Chinese herbal medication. Fingerprint chromatogram is one of the feasible approaches to evaluate the quality of Chinese herbal medication. So the fingerprint chromatogram of Shen-Mai injection was established by using reversed-phase high performance liquid chromatography. The chromatographic conditions were as follows: a Hypersil C18 column was used; the mobile phase was composed of water (A) and acetontrile (B) with linear gradient elution (0-50 min, 5%-95% B, volume fraction); the flow rate was 1.0 mL/min and the UV absorbance detection was set at 202 nm. The peak-area ratios of twenty-three fingerprint peaks and internal standard (diphenyl) were taken as the criteria for quality control. The quality differences in various batches and various manufacturers of Shen-Mai injections were investigated by projection discriminance based on principal component analysis. The results show the method developed is convenient, reliable and applicable for the quality control analysis of Shen-Mai injection.

An Automatic Quality Control Pipeline for High-Throughput Screening Hit Identification.

PubMed

Zhai, Yufeng; Chen, Kaisheng; Zhong, Yang; Zhou, Bin; Ainscow, Edward; Wu, Ying-Ta; Zhou, Yingyao

2016-09-01

The correction or removal of signal errors in high-throughput screening (HTS) data is critical to the identification of high-quality lead candidates. Although a number of strategies have been previously developed to correct systematic errors and to remove screening artifacts, they are not universally effective and still require fair amount of human intervention. We introduce a fully automated quality control (QC) pipeline that can correct generic interplate systematic errors and remove intraplate random artifacts. The new pipeline was first applied to ~100 large-scale historical HTS assays; in silico analysis showed auto-QC led to a noticeably stronger structure-activity relationship. The method was further tested in several independent HTS runs, where QC results were sampled for experimental validation. Significantly increased hit confirmation rates were obtained after the QC steps, confirming that the proposed method was effective in enriching true-positive hits. An implementation of the algorithm is available to the screening community. © 2016 Society for Laboratory Automation and Screening.

Preparation and Analysis of RNA Crystals

NASA Technical Reports Server (NTRS)

Todd, Paul

2000-01-01

The crystallization of RiboNucleic Acids (RNA) was studied from the standpoint of mechanisms of crystal growth in three tasks: (1) preparation of high-quality crystals of oligonuclotides for X-ray diffraction, (2) finding pathways to the growth of high-quality crystals for X-ray diffraction and (3) investigation of mechanisms of action of inertial acceleration on crystal growth. In these tasks: (1) RNA crystals were prepared and studied by X-ray diffraction; (2) a pathway to high-quality crystals was discovered and characterized; a combination of kinetic and equilibrium factors could be optimized as described below; and (3) an interplay between purity and gravity was found in a combination of space and ground experiments with nucleic acids and proteins. Most significantly, the rate of concentration of precipitant and RNA can be controlled by membrane-based methods of water removal or by diffusion of multivalent cations across an interface stabilized by a membrane. Oligonucleotide solutions are electrokinetically stabilized colloids, and crystals can form by the controlled addition of multivalent cations.

Neural network Hilbert transform based filtered backprojection for fast inline x-ray inspection

NASA Astrophysics Data System (ADS)

Janssens, Eline; De Beenhouwer, Jan; Van Dael, Mattias; De Schryver, Thomas; Van Hoorebeke, Luc; Verboven, Pieter; Nicolai, Bart; Sijbers, Jan

2018-03-01

X-ray imaging is an important tool for quality control since it allows to inspect the interior of products in a non-destructive way. Conventional x-ray imaging, however, is slow and expensive. Inline x-ray inspection, on the other hand, can pave the way towards fast and individual quality control, provided that a sufficiently high throughput can be achieved at a minimal cost. To meet these criteria, an inline inspection acquisition geometry is proposed where the object moves and rotates on a conveyor belt while it passes a fixed source and detector. Moreover, for this acquisition geometry, a new neural-network-based reconstruction algorithm is introduced: the neural network Hilbert transform based filtered backprojection. The proposed algorithm is evaluated both on simulated and real inline x-ray data and has shown to generate high quality reconstructions of 400  ×  400 reconstruction pixels within 200 ms, thereby meeting the high throughput criteria.

Long-term health implications of school quality.

PubMed

Dudovitz, Rebecca N; Nelson, Bergen B; Coker, Tumaini R; Biely, Christopher; Li, Ning; Wu, Lynne C; Chung, Paul J

2016-06-01

Individual academic achievement is a well-known predictor of adult health, and addressing education inequities may be critical to reducing health disparities. Disparities in school quality are well documented. However, we lack nationally representative studies evaluating the impact of school quality on adult health. We aim to determine whether high school quality predicts adult health outcomes after controlling for baseline health, socio-demographics and individual academic achievement. We analyzed data from 7037 adolescents who attended one of 77 high schools in the Unites States and were followed into adulthood from the National Longitudinal Study of Adolescent to Adult Health. Selected school-level quality measures-average daily attendance, school promotion rate, parental involvement, and teacher experience-were validated based on ability to predict high school graduation and college attendance. Individual adult health outcomes included self-rated health, diagnosis of depression, and having a measured BMI in the obese range. Logistic regressions controlling for socio-demographics, baseline health, health insurance, and individual academic performance demonstrated that school quality significantly predicted all health outcomes. As hypothesized, attending a school with lower average daily attendance predicted lower self-rated health (Adjusted Odds Ratio (AOR) 1.59, p = 0.003) and higher odds of depression diagnosis (AOR 1.35, p = 0.03); and attending a school with higher parent involvement predicted lower odds of obesity (AOR 0.69, p = 0.001). However, attending a school with higher promotion rate also predicted lower self-rated health (AOR1.20, p < 0.001). High school quality may be an important, but complex, social determinant of health. These findings highlight the potential inter-dependence of education and health policy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Quality of Voluntary Medical Male Circumcision Services during Scale-Up: A Comparative Process Evaluation in Kenya, South Africa, Tanzania and Zimbabwe

PubMed Central

Jennings, Larissa; Bertrand, Jane; Rech, Dino; Harvey, Steven A.; Hatzold, Karin; Samkange, Christopher A.; Omondi Aduda, Dickens S.; Fimbo, Bennett; Cherutich, Peter; Perry, Linnea; Castor, Delivette; Njeuhmeli, Emmanuel

2014-01-01

Background The rapid expansion of voluntary medical male circumcision (VMMC) has raised concerns whether health systems can deliver and sustain VMMC according to minimum quality criteria. Methods and Findings A comparative process evaluation was used to examine data from SYMMACS, the Systematic Monitoring of the Voluntary Medical Male Circumcision Scale-Up, among health facilities providing VMMC across two years of program scale-up. Site-level assessments examined the availability of guidelines, supplies and equipment, infection control, and continuity of care services. Direct observation of VMMC surgeries were used to assess care quality. Two sample tests of proportions and t-tests were used to examine differences in the percent of facilities meeting requisite preparedness standards and the mean number of directly-observed surgical tasks performed correctly. Results showed that safe, high quality VMMC can be implemented and sustained at-scale, although substantial variability was observed over time. In some settings, facility preparedness and VMMC service quality improved as the number of VMMC facilities increased. Yet, lapses in high performance and expansion of considerably deficient services were also observed. Surgical tasks had the highest quality scores, with lower performance levels in infection control, pre-operative examinations, and post-operative patient monitoring and counseling. The range of scale-up models used across countries additionally underscored the complexity of delivering high quality VMMC. Conclusions Greater efforts are needed to integrate VMMC scale-up and quality improvement processes in sub-Saharan African settings. Monitoring of service quality, not just adverse events reporting, will be essential in realizing the full health impact of VMMC for HIV prevention. PMID:24801073

Predicting sport and occupational lower extremity injury risk through movement quality screening: a systematic review.

PubMed

Whittaker, Jackie L; Booysen, Nadine; de la Motte, Sarah; Dennett, Liz; Lewis, Cara L; Wilson, Dave; McKay, Carly; Warner, Martin; Padua, Darin; Emery, Carolyn A; Stokes, Maria

2017-04-01

Identification of risk factors for lower extremity (LE) injury in sport and military/first-responder occupations is required to inform injury prevention strategies. To determine if poor movement quality is associated with LE injury in sport and military/first-responder occupations. 5 electronic databases were systematically searched. Studies selected included original data; analytic design; movement quality outcome (qualitative rating of functional compensation, asymmetry, impairment or efficiency of movement control); LE injury sustained with sport or military/first-responder occupation. The Preferred Reporting Items for Systematic reviews and Meta-Analyses (PRISMA) guidelines were followed. 2 independent authors assessed the quality (Downs and Black (DB) criteria) and level of evidence (Oxford Centre of Evidence-Based Medicine model). Of 4361 potential studies, 17 were included. The majority were low-quality cohort studies (level 4 evidence). Median DB score was 11/33 (range 3-15). Heterogeneity in methodology and injury definition precluded meta-analyses. The Functional Movement Screen was the most common outcome investigated (15/17 studies). 4 studies considered inter-relationships between risk factors, 7 reported diagnostic accuracy and none tested an intervention programme targeting individuals identified as high risk. There is inconsistent evidence that poor movement quality is associated with increased risk of LE injury in sport and military/first-responder occupations. Future research should focus on high-quality cohort studies to identify the most relevant movement quality outcomes for predicting injury risk followed by developing and evaluating preparticipation screening and LE injury prevention programmes through high-quality randomised controlled trials targeting individuals at greater risk of injury based on screening tests with validated test properties. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Predicting Sport and Occupational Lower Extremity Injury Risk through Movement Quality Screening: A Systematic Review

PubMed Central

Whittaker, Jackie L; Booysen, Nadine; de la Motte, Sarah; Dennett, Liz; Lewis, Cara L.; Wilson, Dave; McKay, Carly; Warner, Martin; Padua, Darin; Emery, Carolyn A; Stokes, Maria

2017-01-01

Background Identification of risk factors for lower extremity (LE) injury in sport and military/first-responder occupations is required to inform injury prevention strategies. Objective To determine if poor movement quality is associated with LE injury in sport and military/first-responder occupations. Material and methods Five electronic databases were systematically searched. Studies selected included: original data; analytic design; movement quality outcome (qualitative rating of functional compensation, asymmetry, impairment or efficiency of movement control); LE injury sustained with sport or military/first-responder occupation. The PRISMA guidelines were followed. Two independent authors assessed the quality [Downs and Black (DB) criteria] and level of evidence (Oxford Centre of Evidence-Based Medicine model). Results Of 4361 potential studies, 17 were included. The majority were low quality cohort studies (level 4 evidence). Median DB score was 11/33 (range 3–15). Heterogeneity in methodology and injury definition precluded meta-analyses. The Functional Movement Screen was the most common outcome investigated (15/17 studies). Four studies considered interrelationships between risk factors, seven reported diagnostic accuracy and none tested an intervention program targeting individuals identified as high-risk. There is inconsistent evidence that poor movement quality is associated with increased risk of LE injury in sport and military/first-responder occupations. Conclusions Future research should focus on high quality cohort studies to identify the most relevant movement quality outcomes for predicting injury risk followed by developing and evaluating pre-participation screening and LE injury prevention programs through high quality randomized controlled trials targeting individuals at greater risk of injury based upon screening tests with validated test properties. PMID:27935483

Social and behavioral interventions for improving quality of life of HIV infected people receiving antiretroviral therapy: a systematic review and meta-analysis.

PubMed

Bhatta, Dharma Nand; Liabsuetrakul, Tippawan; McNeil, Edward B

2017-04-24

Improvement in quality of life is crucial for HIV infected people. Social and behavioral interventions have been implemented in different contexts to improve the quality of life among HIV infected people. This review appraises the evidence for available interventions that focused on quality of life of HIV infected people receiving antiretroviral therapy (ART). We searched electronic databases for randomized controlled trials of interventions to improve the quality of life of HIV infected people receiving ART. We searched PUBMED and the Cochrane Centre Register of Controlled Trials (CENTRAL) with the terms "social", "behavioral", "educational", "quality of life", "HIV", and "RCT". Searches were conducted for articles published from 1980 to December 16, 2015. Standardized data abstraction methods and searching steps were applied. Twenty-eight studies reported the impact of social or behavioral interventions in quality of life among HIV infected people, of which 15 were conducted in United States of America. A total of 4136 participants were enrolled. Of the 28 studies, four studies included females, two studies included males and remaining studies excluded both males and females. The overall reported methodological quality of the studies was subject to a high risk of bias and the study criteria were unclear in most studies. Twenty-one studies reported a significant intervention effect on at least one quality of life domain. Meta-analyses showed significant improvement in general health, mental health, physical function and environment domains of quality of life among intervention groups. However, the expected impact of the intervention was low to moderate because the rigorousness of the studies was low, information was limited, the sample sizes were small and other the quality of the study designs were poor. Although the available evidence suggests that existing social and behavioral interventions can improve some quality of life domains, the quality of evidence was insufficient to support the notion that these interventions can improve the overall quality of life of HIV infected people receiving ART. Well-designed and rigorous randomized controlled trials with high methodological quality are required.

Application of microscopy technique and high-performance liquid chromatography for quality assessment of the flower bud of Tussilago farfara L. (Kuandonghua)

PubMed Central

Li, Da; Liang, Li; Zhang, Jing; Kang, Tingguo

2015-01-01

Background: Quality control is one of the bottleneck problems limiting the application and development of traditional Chinese medicine (TCM). In recent years, microscopy and high-performance liquid chromatography (HPLC) techniques have been frequently applied in the quality control of TCM. However, studies combining conventional microscopy and HPLC techniques for the quality control of the flower bud of Tussilago farfara L. (Kuandonghua) have not been reported. Objective: This study was undertaken to evaluate the quality of the flower bud of T. farfara L. and to establish the relationships between the quantity of pollen grains and four main bioactive constituents: tussilagone, chlorogenic acid, rutin and isoquercitrin. Materials and Methods: In this study, microscopic examination was used to quantify microscopic characteristics of the flower bud of T. farfara L., and the chemical components were determined by HPLC. The data were analyzed by Statistical Package for the Social Sciences statistics software. Results: The results of the analysis showed that tussilagone, chlorogenic acid, rutin and isoquercitrin were significantly correlated with the quantity of pollen grains in the flower bud of T. farfara L. There is a positive correlation between them. From these results, it can be deduced that the flower bud of T. farfara L. with a greater quantity of pollen grains should be of better quality. Conclusion: The study showed that the established method can be helpful for evaluating the quality of the flower bud of T. farfara L. based on microscopic characteristic constants and chemical quantitation. PMID:26246737

Effects of rhythmical and extra-rhythmical qualities of music on heart rate during stationary bike activities.

PubMed

DI Cagno, Alessandra; Iuliano, Enzo; Fiorilli, Giovanni; Aquino, Giovanna; Giombini, Arrigo; Menotti, Federica; Tsopani, Despina; Calcagno, Giuseppe

2016-10-01

The aim of this study was to evaluate the effects of rhythmical and extra-rhythmical qualities of music on the heart rate (HR) and rates of perceived exertion (RPE), during sub-maximal stationary bike activity. HR of 28 female adult participants was monitored during 3 session of physical activity, performed under 3 different conditions: Hi-BPM (music with 150-170 BPM), RHYTHM (rhythmical qualities only of Hi-BPM condition) and control condition without music (CONTROL). Four parameters were analyzed: the highest HR value (High-HR), High-HR minus starting HR (∆HR), time to reach the 75% of Maximal HR (MHR) (TimeTo75%) and time over 75% MHR (TimeOver75%). HR trend analysis was performed to evaluate differences among the three conditions. OMNI-Cycle Scale was administered to evaluate RPE. MANOVA showed significant differences between the three conditions in TimeTo75%, ∆HR (P<0.01) and TimeOver75% (P<0.05). In RHYTHM and CONTROL conditions after reaching 75% MHR, the HR increase were significantly lower than Hi-BPM (P<0.01). No significant differences were found in OMNI-Cycle Scale scores of Hi-BPM and RHYTHM whereas RPE was significantly higher in CONTROL condition (P<0.05). Hi-BPM and RHYTHM music allowed a faster reaching of the aerobic training zone compared to CONTROL conditions. Nevertheless, after 75% MHR, extra-rhythmical qualities are necessary to maintain or to increase the working HR levels.

Evaluation of flow quality in two large NASA wind tunnels at transonic speeds

NASA Technical Reports Server (NTRS)

Harvey, W. D.; Stainback, P. C.; Owen, F. K.

1980-01-01

Wind tunnel testing of low drag airfoils and basic transition studies at transonic speeds are designed to provide high quality aerodynamic data at high Reynolds numbers. This requires that the flow quality in facilities used for such research be excellent. To obtain a better understanding of the characteristics of facility disturbances and identification of their sources for possible facility modification, detailed flow quality measurements were made in two prospective NASA wind tunnels. Experimental results are presented of an extensive and systematic flow quality study of the settling chamber, test section, and diffuser in the Langley 8 foot transonic pressure tunnel and the Ames 12 foot pressure wind tunnel. Results indicate that the free stream velocity and pressure fluctuation levels in both facilities are low at subsonic speeds and are so high as to make it difficult to conduct meaningful boundary layer control and transition studies at transonic speeds.

Octafluoropropane Concentration Dynamics on Board the International Space Station

NASA Technical Reports Server (NTRS)

Perry, J. L.

2003-01-01

Since activating the International Space Station s (IS9 Service Module in November 2000, archival air quality samples have shown highly variable concentrations of octafluoropropane in the cabin. This variability has been directly linked to leakage from air conditioning systems on board the Service Module, Zvezda. While octafluoro- propane is not highly toxic, it presents a significant chal- lenge to the trace contaminant control systems. A discussion of octafluoropropane concentration dynamics is presented and the ability of on board trace contami- nant control systems to effectively remove octafluoropro- pane from the cabin atmosphere is assessed. Consideration is given to operational and logistics issues that may arise from octafluoropropane and other halo- carbon challenges to the contamination control systems as well as the potential for effecting cabin air quality.

Statistical process control based chart for information systems security

NASA Astrophysics Data System (ADS)

Khan, Mansoor S.; Cui, Lirong

2015-07-01

Intrusion detection systems have a highly significant role in securing computer networks and information systems. To assure the reliability and quality of computer networks and information systems, it is highly desirable to develop techniques that detect intrusions into information systems. We put forward the concept of statistical process control (SPC) in computer networks and information systems intrusions. In this article we propose exponentially weighted moving average (EWMA) type quality monitoring scheme. Our proposed scheme has only one parameter which differentiates it from the past versions. We construct the control limits for the proposed scheme and investigate their effectiveness. We provide an industrial example for the sake of clarity for practitioner. We give comparison of the proposed scheme with EWMA schemes and p chart; finally we provide some recommendations for the future work.

Automated Quality Control of in Situ Soil Moisture from the North American Soil Moisture Database Using NLDAS-2 Products

NASA Astrophysics Data System (ADS)

Ek, M. B.; Xia, Y.; Ford, T.; Wu, Y.; Quiring, S. M.

2015-12-01

The North American Soil Moisture Database (NASMD) was initiated in 2011 to provide support for developing climate forecasting tools, calibrating land surface models and validating satellite-derived soil moisture algorithms. The NASMD has collected data from over 30 soil moisture observation networks providing millions of in situ soil moisture observations in all 50 states as well as Canada and Mexico. It is recognized that the quality of measured soil moisture in NASMD is highly variable due to the diversity of climatological conditions, land cover, soil texture, and topographies of the stations and differences in measurement devices (e.g., sensors) and installation. It is also recognized that error, inaccuracy and imprecision in the data set can have significant impacts on practical operations and scientific studies. Therefore, developing an appropriate quality control procedure is essential to ensure the data is of the best quality. In this study, an automated quality control approach is developed using the North American Land Data Assimilation System phase 2 (NLDAS-2) Noah soil porosity, soil temperature, and fraction of liquid and total soil moisture to flag erroneous and/or spurious measurements. Overall results show that this approach is able to flag unreasonable values when the soil is partially frozen. A validation example using NLDAS-2 multiple model soil moisture products at the 20 cm soil layer showed that the quality control procedure had a significant positive impact in Alabama, North Carolina, and West Texas. It had a greater impact in colder regions, particularly during spring and autumn. Over 433 NASMD stations have been quality controlled using the methodology proposed in this study, and the algorithm will be implemented to control data quality from the other ~1,200 NASMD stations in the near future.

Beam shaping in high-power broad-area quantum cascade lasers using optical feedback

PubMed Central

Ferré, Simon; Jumpertz, Louise; Carras, Mathieu; Ferreira, Robson; Grillot, Frédéric

2017-01-01

Broad-area quantum cascade lasers with high output powers are highly desirable sources for various applications including infrared countermeasures. However, such structures suffer from strongly deteriorated beam quality due to multimode behavior, diffraction of light and self-focusing. Quantum cascade lasers presenting high performances in terms of power and heat-load dissipation are reported and their response to a nonlinear control based on optical feedback is studied. Applying optical feedback enables to efficiently tailor its near-field beam profile. The different cavity modes are sequentially excited by shifting the feedback mirror angle. Further control of the near-field profile is demonstrated using spatial filtering. The impact of an inhomogeneous gain as well as the influence of the cavity width are investigated. Compared to existing technologies, that are complex and costly, beam shaping with optical feedback is a more flexible solution to obtain high-quality mid-infrared sources. PMID:28287175

Beam shaping in high-power broad-area quantum cascade lasers using optical feedback.

PubMed

Ferré, Simon; Jumpertz, Louise; Carras, Mathieu; Ferreira, Robson; Grillot, Frédéric

2017-03-13

Broad-area quantum cascade lasers with high output powers are highly desirable sources for various applications including infrared countermeasures. However, such structures suffer from strongly deteriorated beam quality due to multimode behavior, diffraction of light and self-focusing. Quantum cascade lasers presenting high performances in terms of power and heat-load dissipation are reported and their response to a nonlinear control based on optical feedback is studied. Applying optical feedback enables to efficiently tailor its near-field beam profile. The different cavity modes are sequentially excited by shifting the feedback mirror angle. Further control of the near-field profile is demonstrated using spatial filtering. The impact of an inhomogeneous gain as well as the influence of the cavity width are investigated. Compared to existing technologies, that are complex and costly, beam shaping with optical feedback is a more flexible solution to obtain high-quality mid-infrared sources.

Minimizing quality changes of cloudy apple juice: The use of kiwifruit puree and high pressure homogenization.

PubMed

Yi, Junjie; Kebede, Biniam; Kristiani, Kristiani; Grauwet, Tara; Van Loey, Ann; Hendrickx, Marc

2018-05-30

Cloud loss, enzymatic browning, and flavor changes are important quality defects of cloudy fruit juices determining consumer acceptability. The development of clean label options to overcome such quality problems is currently of high interest. Therefore, this study investigated the effect of kiwifruit puree (clean label ingredient) and high pressure homogenization on quality changes of cloudy apple juice using a multivariate approach. The use of kiwifruit puree addition and high pressure homogenization resulted in a juice with improved uniformity and cloud stability by reducing particle size and increasing viscosity and yield stress (p < 0.01). Furthermore, kiwifruit puree addition reduced enzymatic browning (ΔE ∗  < 3), due to the increased ascorbic acid and contributed to a more saturated and bright yellow color, a better taste balance, and a more fruity aroma of juice. This work demonstrates that clean label options to control quality degradation of cloudy fruit juice might offer new opportunities. Copyright © 2018 Elsevier Ltd. All rights reserved.

Residual risk of bacterial contamination of platelets: six years of experience with sterility testing.

PubMed

Ramirez-Arcos, Sandra; DiFranco, Caesar; McIntyre, Terri; Goldman, Mindy

2017-09-01

Canadian Blood Services screens 100% of platelet concentrates (PCs) for bacterial contamination with the BacT/ALERT system. Quality-control sterility testing of 1% (≥10 units) of outdated PCs is performed monthly. Data from routine screening, quality-control testing, and septic reactions obtained from 2010 to 2016 are presented herein. In total, 601,988 buffy coat PC pools and 186,737 apheresis PCs were routinely screened with aerobic cultures over 6 years. Outdate quality-control testing of 8535 buffy coat and 8498 apheresis PCs was performed using aerobic and anaerobic cultures during the same period. Results were classified as "true-positives" when the same bacterium was isolated in initial and confirmatory cultures or "false-negatives" when bacteria were missed in early screening and were captured during quality-control sterility testing or through investigation of sepsis cases. During routine screening, the true-positive rates between buffy coat (0.94 per 10,000) and apheresis (0.96 per 10,000) PCs were similar (p = 0.9473). Seventy-five bacteria isolated during PC screening included Gram-positive and Gram-negative organisms. Six false-negative septic reactions were reported that implicated coagulase-negative staphylococci (n = 3) and Staphylococcus aureus (n = 3) for approximate rates of 1 per 100,000 transfusion reactions and 1 per 500,000 fatalities. During quality-control testing, the false-negative rates between buffy coat (8 per 10,000) and apheresis (9 per 10,000) PCs were similar (p = 0.7897). All 15 quality-control isolates were Gram-positive bacteria. The current bacterial screening protocol is efficacious for identifying Gram-negative bacteria. However, the high proportion of Gram-positive organisms detected on outdate quality-control testing and septic transfusion events demonstrates a residual safety risk that merits further intervention. © 2017 AABB.

A novel cell line generated using the CRISPR/Cas9 technology as universal quality control material for KRAS G12V mutation testing.

PubMed

Jia, Shiyu; Zhang, Rui; Lin, Guigao; Peng, Rongxue; Gao, Peng; Han, Yanxi; Fu, Yu; Ding, Jiansheng; Wu, Qisheng; Zhang, Kuo; Xie, Jiehong; Li, Jinming

2018-06-01

KRAS mutations are the key indicator for EGFR monoclonal antibody-targeted therapy and acquired drug resistance, and their accurate detection is critical to the clinical decision-making of colorectal cancer. However, no proper quality control material is available for the current detection methods, particularly next-generation sequencing (NGS). The ideal quality control material for NGS needs to provide both the tumor mutation gene and the matched background genomic DNA, which is uncataloged in public databases, to accurately distinguish germline polymorphisms and somatic mutations. We developed a novel KRAS G12V mutant cell line using the clustered regularly interspaced short palindromic repeat (CRISPR)/CRISPR-associated protein 9 (Cas9) technique to make up for the deficiencies in existing quality control material and further validated the feasibility of the cell line as quality control material by amplification refractory mutation system (ARMS), Sanger sequencing, digital PCR (dPCR), and NGS. We verified that the edited cell line specifically had the G12V mutation, and the validation results presented a high consistency among the four methods of detection. The three cell lines screened contained the G12V mutation and the mutation allele fractions of G12V-1, G12V-2, and G12V-3 were 52.01%, 82.06%, and 17.29%, respectively. The novel KRAS G12V cell line generated using the CRISPR/Cas9 gene editing system is suitable as a quality control material for all current detection methods and provides a new direction in the development of quality control material. © 2018 Wiley Periodicals, Inc.

High School Environmental Science Course Guide.

ERIC Educational Resources Information Center

Donovan, Edward P.; Korman, Barbara

A course in environmental science was developed to increase course options for students of all abilities and interest levels. Major topic areas of the course include: introduction to ecological principles and ecosystems; extinction of species; human population dynamics; agricultural systems and pest control; air quality; water quality; solid…

Effect of Seed Quality and Combination Fungicide-Trichoderma spp. Seed Treatments on Pre- and Postemergence Damping-Off in Cotton.

PubMed

Howell, Charles R

2007-01-01

ABSTRACT Good quality seeds of cotton cultivars often escaped pre-emergence damping-off incited by Pythium spp. and Rhizopus oryzae, and they were resistant to postemergence damping-off incited by Rhizoctonia solani. Poor quality seeds, however, were highly susceptible to both phases of seedling disease and required seed treatment in order to survive. Pre-emergence damping-off incited by Pythium spp. and Rhizopus oryzae could be controlled by seed treatment with biocontrol preparations of a number of Trichoderma spp., but these treatments were much less effective in controlling postemergence disease incited by Rhizoctonia solani. Postemergence seedling disease can be controlled by fungicides, but they were much less effective in controlling the pre-emergence phase of the disease. Combination seed treatments of poor quality cotton seeds with fungicides and Trichoderma spp. preparations, followed by planting in pathogen-infested soil, indicated that this technique will control both phases of seedling disease. Seed treatment with either the fungicides or the biocontrol agents alone did not achieve this goal. The optimum combination treatment for disease control was that of chloroneb plus Trichoderma spp., followed by chloroneb plus metalaxyl (Deltacoat AD) plus T. virens strain G-6.

In vivo drug metabolite identification in preclinical ADME studies by means of UPLC/TWIMS/high resolution-QTOF MS(E) and control comparison: cost and benefit of vehicle-dosed control samples.

PubMed

Fiebig, Lukas; Laux, Ralf; Binder, Rudolf; Ebner, Thomas

2016-10-01

1. Liquid chromatography (LC)-high resolution mass spectrometry (HRMS) techniques proved to be well suited for the identification of predicted and unexpected drug metabolites in complex biological matrices. 2. To efficiently discriminate between drug-related and endogenous matrix compounds, however, sophisticated postacquisition data mining tools, such as control comparison techniques are needed. For preclinical absorption, distribution, metabolism and excretion (ADME) studies that usually lack a placebo-dosed control group, the question arises how high-quality control data can be yielded using only a minimum number of control animals. 3. In the present study, the combination of LC-traveling wave ion mobility separation (TWIMS)-HRMS(E) and multivariate data analysis was used to study the polymer patterns of the frequently used formulation constituents polyethylene glycol 400 and polysorbate 80 in rat plasma and urine after oral and intravenous administration, respectively. 4. Complex peak patterns of both constituents were identified underlining the general importance of a vehicle-dosed control group in ADME studies for control comparison. Furthermore, the detailed analysis of administration route, blood sampling time and gender influences on both vehicle peak pattern as well as endogenous matrix background revealed that high-quality control data is obtained when (i) control animals receive an intravenous dose of the vehicle, (ii) the blood sampling time point is the same for analyte and control sample and (iii) analyte and control samples of the same gender are compared.

ESN (European Science Notes Information Bulletin) Reports on Current European/Middle Eastern Science,

DTIC Science & Technology

1988-04-01

alyeinutal Sundaram, a recent encouraging development is the dis- high - fructose co .Enzyme-catalyzed industrial covery of thermophiles outside these genera. Of...intermediate and high frequencies, and ice noise. BEHAVIORAL SCIENCES Self-Concept and Adjustment." Research by Portugal’s Adriano Vaz-Serra...covered. CONTROL SYSTEMS High -Quality Control Rcs,: rch at Instilute for Flight "’ Systems Dynamics ’ . . ......................... Daniel J. Collins

Statistical process control methods allow the analysis and improvement of anesthesia care.

PubMed

Fasting, Sigurd; Gisvold, Sven E

2003-10-01

Quality aspects of the anesthetic process are reflected in the rate of intraoperative adverse events. The purpose of this report is to illustrate how the quality of the anesthesia process can be analyzed using statistical process control methods, and exemplify how this analysis can be used for quality improvement. We prospectively recorded anesthesia-related data from all anesthetics for five years. The data included intraoperative adverse events, which were graded into four levels, according to severity. We selected four adverse events, representing important quality and safety aspects, for statistical process control analysis. These were: inadequate regional anesthesia, difficult emergence from general anesthesia, intubation difficulties and drug errors. We analyzed the underlying process using 'p-charts' for statistical process control. In 65,170 anesthetics we recorded adverse events in 18.3%; mostly of lesser severity. Control charts were used to define statistically the predictable normal variation in problem rate, and then used as a basis for analysis of the selected problems with the following results: Inadequate plexus anesthesia: stable process, but unacceptably high failure rate; Difficult emergence: unstable process, because of quality improvement efforts; Intubation difficulties: stable process, rate acceptable; Medication errors: methodology not suited because of low rate of errors. By applying statistical process control methods to the analysis of adverse events, we have exemplified how this allows us to determine if a process is stable, whether an intervention is required, and if quality improvement efforts have the desired effect.

Can exercise improve self esteem in children and young people? A systematic review of randomised controlled trials.

PubMed

Ekeland, E; Heian, F; Hagen, K B

2005-11-01

A systematic review to determine if exercise alone or as part of a comprehensive intervention can improve self esteem in children and young people is described. Twenty three randomised controlled trials were analysed. A synthesis of several small, low quality trials indicates that exercise may have short term beneficial effects on self esteem in children and adolescents. However, high quality research on defined populations with adequate follow up is needed.

"A manager in the minds of doctors:" a comparison of new modes of control in European hospitals.

PubMed

Kuhlmann, Ellen; Burau, Viola; Correia, Tiago; Lewandowski, Roman; Lionis, Christos; Noordegraaf, Mirko; Repullo, Jose

2013-07-02

Hospital governance increasingly combines management and professional self-governance. This article maps the new emergent modes of control in a comparative perspective and aims to better understand the relationship between medicine and management as hybrid and context-dependent. Theoretically, we critically review approaches into the managerialism-professionalism relationship; methodologically, we expand cross-country comparison towards the meso-level of organisations; and empirically, the focus is on processes and actors in a range of European hospitals. The research is explorative and was carried out as part of the FP7 COST action IS0903 Medicine and Management, Working Group 2. Comprising seven European countries, the focus is on doctors and public hospitals. We use a comparative case study design that primarily draws on expert information and document analysis as well as other secondary sources. The findings reveal that managerial control is not simply an external force but increasingly integrated in medical professionalism. These processes of change are relevant in all countries but shaped by organisational settings, and therefore create different patterns of control: (1) 'integrated' control with high levels of coordination and coherent patterns for cost and quality controls; (2) 'partly integrated' control with diversity of coordination on hospital and department level and between cost and quality controls; and (3) 'fragmented' control with limited coordination and gaps between quality control more strongly dominated by medicine, and cost control by management. Our comparison highlights how organisations matter and brings the crucial relevance of 'coordination' of medicine and management across the levels (hospital/department) and the substance (cost/quality-safety) of control into perspective. Consequently, coordination may serve as a taxonomy of emergent modes of control, thus bringing new directions for cost-efficient and quality-effective hospital governance into perspective.

Comparison of the temperature accuracy between smart phone based and high-end thermal cameras using a temperature gradient phantom

NASA Astrophysics Data System (ADS)

Klaessens, John H.; van der Veen, Albert; Verdaasdonk, Rudolf M.

2017-03-01

Recently, low cost smart phone based thermal cameras are being considered to be used in a clinical setting for monitoring physiological temperature responses such as: body temperature change, local inflammations, perfusion changes or (burn) wound healing. These thermal cameras contain uncooled micro-bolometers with an internal calibration check and have a temperature resolution of 0.1 degree. For clinical applications a fast quality measurement before use is required (absolute temperature check) and quality control (stability, repeatability, absolute temperature, absolute temperature differences) should be performed regularly. Therefore, a calibrated temperature phantom has been developed based on thermistor heating on both ends of a black coated metal strip to create a controllable temperature gradient from room temperature 26 °C up to 100 °C. The absolute temperatures on the strip are determined with software controlled 5 PT-1000 sensors using lookup tables. In this study 3 FLIR-ONE cameras and one high end camera were checked with this temperature phantom. The results show a relative good agreement between both low-cost and high-end camera's and the phantom temperature gradient, with temperature differences of 1 degree up to 6 degrees between the camera's and the phantom. The measurements were repeated as to absolute temperature and temperature stability over the sensor area. Both low-cost and high-end thermal cameras measured relative temperature changes with high accuracy and absolute temperatures with constant deviations. Low-cost smart phone based thermal cameras can be a good alternative to high-end thermal cameras for routine clinical measurements, appropriate to the research question, providing regular calibration checks for quality control.

Safety and EEG data quality of concurrent high-density EEG and high-speed fMRI at 3 Tesla.

PubMed

Foged, Mette Thrane; Lindberg, Ulrich; Vakamudi, Kishore; Larsson, Henrik B W; Pinborg, Lars H; Kjær, Troels W; Fabricius, Martin; Svarer, Claus; Ozenne, Brice; Thomsen, Carsten; Beniczky, Sándor; Paulson, Olaf B; Posse, Stefan

2017-01-01

Concurrent EEG and fMRI is increasingly used to characterize the spatial-temporal dynamics of brain activity. However, most studies to date have been limited to conventional echo-planar imaging (EPI). There is considerable interest in integrating recently developed high-speed fMRI methods with high-density EEG to increase temporal resolution and sensitivity for task-based and resting state fMRI, and for detecting interictal spikes in epilepsy. In the present study using concurrent high-density EEG and recently developed high-speed fMRI methods, we investigate safety of radiofrequency (RF) related heating, the effect of EEG on cortical signal-to-noise ratio (SNR) in fMRI, and assess EEG data quality. The study compared EPI, multi-echo EPI, multi-band EPI and multi-slab echo-volumar imaging pulse sequences, using clinical 3 Tesla MR scanners from two different vendors that were equipped with 64- and 256-channel MR-compatible EEG systems, respectively, and receive only array head coils. Data were collected in 11 healthy controls (3 males, age range 18-70 years) and 13 patients with epilepsy (8 males, age range 21-67 years). Three of the healthy controls were scanned with the 256-channel EEG system, the other subjects were scanned with the 64-channel EEG system. Scalp surface temperature, SNR in occipital cortex and head movement were measured with and without the EEG cap. The degree of artifacts and the ability to identify background activity was assessed by visual analysis by a trained expert in the 64 channel EEG data (7 healthy controls, 13 patients). RF induced heating at the surface of the EEG electrodes during a 30-minute scan period with stable temperature prior to scanning did not exceed 1.0° C with either EEG system and any of the pulse sequences used in this study. There was no significant decrease in cortical SNR due to the presence of the EEG cap (p > 0.05). No significant differences in the visually analyzed EEG data quality were found between EEG recorded during high-speed fMRI and during conventional EPI (p = 0.78). Residual ballistocardiographic artifacts resulted in 58% of EEG data being rated as poor quality. This study demonstrates that high-density EEG can be safely implemented in conjunction with high-speed fMRI and that high-speed fMRI does not adversely affect EEG data quality. However, the deterioration of the EEG quality due to residual ballistocardiographic artifacts remains a significant constraint for routine clinical applications of concurrent EEG-fMRI.

An Updated Meta-Analysis of Laparoscopic Versus Open Repair for Perforated Peptic Ulcer.

PubMed

Zhou, Chunhua; Wang, Weizhi; Wang, Jiwei; Zhang, Xiaoyu; Zhang, Qun; Li, Bowen; Xu, Zekuan

2015-09-09

Laparoscopic repair (LR) for perforated peptic ulcer (PPU) has been introduced since 1990. Although many studies comparing LR with open repair (OR) have been published, controversy remains regarding the clinical utility of laparoscopic techniques for the treatment of PPU. Thus, it is necessary for us to broaden our knowledge on this subject with the newly published articles. Twenty-four nonrandomized controlled studies (NRS) and five randomized controlled trails (RCTs) were included in our meta-analyses, which comprised 5,268 patients (1,890 in the LR group and 3,378 in the OR group). In the analysis of high quality NRS and RCTs, compared with OR, high quality evidence suggested that LR was associated with a lower incidence of overall postoperative complications; moderate evidence showed that the two procedures had the similar reoperation rate; based on the low quality evidence, LR had reduced hospital mortality and similar operative time; Moreover, LR was observed having the advantages of earlier resumption of oral intake, shorter hospital stay and less analgesic use, which were supported by very low evidence. All the evidences suggest that LR is better than OR for PPU, but more high-quality RCTs are still needed for further validation.

An Updated Meta-Analysis of Laparoscopic Versus Open Repair for Perforated Peptic Ulcer

PubMed Central

Zhou, Chunhua; Wang, Weizhi; Wang, Jiwei; Zhang, Xiaoyu; Zhang, Qun; Li, Bowen; Xu, Zekuan

2015-01-01

Laparoscopic repair (LR) for perforated peptic ulcer (PPU) has been introduced since 1990. Although many studies comparing LR with open repair (OR) have been published, controversy remains regarding the clinical utility of laparoscopic techniques for the treatment of PPU. Thus, it is necessary for us to broaden our knowledge on this subject with the newly published articles. Twenty-four nonrandomized controlled studies (NRS) and five randomized controlled trails (RCTs) were included in our meta-analyses, which comprised 5,268 patients (1,890 in the LR group and 3,378 in the OR group). In the analysis of high quality NRS and RCTs, compared with OR, high quality evidence suggested that LR was associated with a lower incidence of overall postoperative complications; moderate evidence showed that the two procedures had the similar reoperation rate; based on the low quality evidence, LR had reduced hospital mortality and similar operative time; Moreover, LR was observed having the advantages of earlier resumption of oral intake, shorter hospital stay and less analgesic use, which were supported by very low evidence. All the evidences suggest that LR is better than OR for PPU, but more high-quality RCTs are still needed for further validation. PMID:26350958

Associations Between Sleep Quality and Migraine Frequency

PubMed Central

Lin, Yu-Kai; Lin, Guan-Yu; Lee, Jiunn-Tay; Lee, Meei-Shyuan; Tsai, Chia-Kuang; Hsu, Yu-Wei; Lin, Yu-Zhen; Tsai, Yi-Chien; Yang, Fu-Chi

2016-01-01

Abstract Migraine has been associated with sleep disturbances. Relationship between sleep quality and migraine frequency is yet to be determined. The present study aimed to investigate sleep disturbances among low-frequency, moderate-frequency, high-frequency, and chronic migraineurs, with and without auras, with well-controlled confounding variables. This cross-sectional controlled study included 357 subjects from an outpatient headache clinic in Taiwan. Standardized questionnaires were utilized to collect demographic, migraine, sleep, depression, anxiety, and restless leg syndrome characteristics in all participants. According to frequency of migraine attacks, patients were divided into 4 groups: with 1 to 4 migraine days per month, 5 to 8 migraine days in a month, 9 to 14 migraine days in a month, and >14 migraine days per month. The Pittsburgh Sleep Quality Index (PSQI) and subgroup items were used to evaluate sleep quality. The association between migraine frequency and sleep quality was investigated using multivariable linear regression and logistic regression. The PSQI total score was highest in patients with high frequent migraine (10.0 ± 3.4) and lowest in controls (7.0 ± 3.4) with a significant trend analysis (P for trend = 0.006). Migraine frequency had an independent effect on the items “Cannot get to sleep within 30 minutes” (P < 0.001), “Wake up in the middle of the night or early morning” (P < 0.001), “Bad dreams” (P = 0.001), “Pain” (P = 0.004), and “Quality of sleep” (P < 0.001). The result showed the effect of migraine frequency in both the aura-present (P for trend = 0.008) and the aura-absent subgroups (P for trend = 0.011). High migraine frequency correlates with poor sleep quality and a higher prevalence of poor sleepers. These associations occur in migraine with aura and without aura. PMID:27124064

Impact of flying qualities on mission effectiveness for helicopter air combat

NASA Technical Reports Server (NTRS)

Harris, T. M.; Beerman, D. A.; Bivens, C. C.

1984-01-01

Battlefield nap-of-the-earth (NOE) helicopter operations are vital for a use of the helicopter in a high-threat environment. As the pilot's workload in this flight regime is very high, the helicopter's handling qualities become an important factor. The present investigation is concerned with overall mission effectiveness, flying qualities, and their interaction with other parameters. A description is presented of a study which generated a significant amount of date relating the importance of flying qualities to the ability to perform several specific mission tasks. It was found that flying qualities do have a major impact on the ability to perform a specific mission. The impact of flying qualities on Scout helicopter mission effectiveness is mainly related to the probability of being detected. The flying qualities effect most critical to the Scout mission was found to be precision of hover control.

Improving Breast Cancer Surgical Treatment Decision Making: The iCanDecide Randomized Clinical Trial.

PubMed

Hawley, Sarah T; Li, Yun; An, Lawrence C; Resnicow, Kenneth; Janz, Nancy K; Sabel, Michael S; Ward, Kevin C; Fagerlin, Angela; Morrow, Monica; Jagsi, Reshma; Hofer, Timothy P; Katz, Steven J

2018-03-01

Purpose This study was conducted to determine the effect of iCanDecide, an interactive and tailored breast cancer treatment decision tool, on the rate of high-quality patient decisions-both informed and values concordant-regarding locoregional breast cancer treatment and on patient appraisal of decision making. Methods We conducted a randomized clinical trial of newly diagnosed patients with early-stage breast cancer making locoregional treatment decisions. From 22 surgical practices, 537 patients were recruited and randomly assigned online to the iCanDecide interactive and tailored Web site (intervention) or the iCanDecide static Web site (control). Participants completed a baseline survey and were mailed a follow-up survey 4 to 5 weeks after enrollment to assess the primary outcome of a high-quality decision, which consisted of two components, high knowledge and values-concordant treatment, and secondary outcomes (decision preparation, deliberation, and subjective decision quality). Results Patients in the intervention arm had higher odds of making a high-quality decision than did those in the control arm (odds ratio, 2.00; 95% CI, 1.37 to 2.92; P = .0004), which was driven primarily by differences in the rates of high knowledge between groups. The majority of patients in both arms made values-concordant treatment decisions (78.6% in the intervention arm and 81.4% in the control arm). More patients in the intervention arm had high decision preparation (estimate, 0.18; 95% CI, 0.02 to 0.34; P = .027), but there were no significant differences in the other decision appraisal outcomes. The effect of the intervention was similar for women who were leaning strongly toward a treatment option at enrollment compared with those who were not. Conclusion The tailored and interactive iCanDecide Web site, which focused on knowledge building and values clarification, positively affected high-quality decisions largely by improving knowledge compared with static online information. To be effective, future patient-facing decision tools should be integrated into the clinical workflow to improve decision making.

Shape-Controlled Synthesis of High-Quality Cu7 S4 Nanocrystals for Efficient Light-Induced Water Evaporation.

PubMed

Zhang, Changbo; Yan, Cong; Xue, Zhenjie; Yu, Wei; Xie, Yinde; Wang, Tie

2016-10-01

Copper sulfides (Cu 2-x S), are a novel kind of photothermal material exhibiting significant photothermal conversion efficiency, making them very attractive in various energy conversion related devices. Preparing high quality uniform Cu 2-x S nanocrystals (NCs) is a top priority for further energy-and sustainability relevant nanodevices. Here, a shape-controlled high quality Cu 7 S 4 NCs synthesis strategy is reported using sulfur in 1-octadecene as precursor by varying the heating temperature, as well as its forming mechanism. The performance of the Cu 7 S 4 NCs is further explored for light-driven water evaporation without the need of heating the bulk liquid to the boiling point, and the results suggest that as-synthesized highly monodisperse NCs perform higher evaporation rate than polydisperse NCs under the identical morphology. Furthermore, disk-like NCs exhibit higher water evaporation rate than spherical NCs. The water evaporation rate can be further enhanced by assembling the organic phase Cu 7 S 4 NCs into a dense film on the aqueous solution surface. The maximum photothermal conversion efficiency is as high as 77.1%. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Large-scale synthesis of high-quality hexagonal boron nitride nanosheets for large-area graphene electronics.

PubMed

Lee, Kang Hyuck; Shin, Hyeon-Jin; Lee, Jinyeong; Lee, In-yeal; Kim, Gil-Ho; Choi, Jae-Young; Kim, Sang-Woo

2012-02-08

Hexagonal boron nitride (h-BN) has received a great deal of attention as a substrate material for high-performance graphene electronics because it has an atomically smooth surface, lattice constant similar to that of graphene, large optical phonon modes, and a large electrical band gap. Herein, we report the large-scale synthesis of high-quality h-BN nanosheets in a chemical vapor deposition (CVD) process by controlling the surface morphologies of the copper (Cu) catalysts. It was found that morphology control of the Cu foil is much critical for the formation of the pure h-BN nanosheets as well as the improvement of their crystallinity. For the first time, we demonstrate the performance enhancement of CVD-based graphene devices with large-scale h-BN nanosheets. The mobility of the graphene device on the h-BN nanosheets was increased 3 times compared to that without the h-BN nanosheets. The on-off ratio of the drain current is 2 times higher than that of the graphene device without h-BN. This work suggests that high-quality h-BN nanosheets based on CVD are very promising for high-performance large-area graphene electronics. © 2012 American Chemical Society

Adaptive weld control for high-integrity welding applications

NASA Technical Reports Server (NTRS)

Powell, Bradley W.

1993-01-01

An advanced adaptive control weld system for high-integrity welding applications is presented. The system consists of a state-of-the-art weld control subsystem, motion control subsystem, and sensor subsystem which closes the loop on the process. The adaptive control subsystem (ACS), which is required to totally close the loop on weld process control, consists of a multiprocessor system, data acquisition hardware, and three welding sensors which provide measurements from all areas around the torch in real time. The ACS acquires all 'measurables' and feeds offset trims back into the weld control and motion control subsystems to modify the 'controllables' in order to maintain a previously defined weld quality.

Are reports of randomized controlled trials improving over time? A systematic review of 284 articles published in high-impact general and specialized medical journals.

PubMed

To, Matthew J; Jones, Jennifer; Emara, Mohamed; Jadad, Alejandro R

2013-01-01

Inadequate reporting undermines findings of randomized controlled trials (RCTs). This study assessed and compared articles published in high-impact general medical and specialized journals. Reports of RCTs published in high-impact general and specialized medical journals were identified through a search of MEDLINE from January to March of 1995, 2000, 2005, and 2010. Articles that provided original data on adult patients diagnosed with chronic conditions were included in the study. Data on trial characteristics, reporting of allocation concealment, quality score, and the presence of a trial flow diagram were extracted independently by two reviewers, and discrepancies were resolved by consensus or independent adjudication. Descriptive statistics were used for quantitative variables. Comparisons between general medical and specialized journals, and trends over time were performed using Chi-square tests. Reports of 284 trials were analyzed. There was a significantly higher proportion of RCTs published with adequate reporting of allocation concealment (p = 0.003), presentation of a trial flow diagram (p<0.0001) and high quality scores (p = 0.038) over time. Trials published in general medical journals had higher quality scores than those in specialized journals (p = 0.001), reported adequate allocation concealment more often (p = 0.013), and presented a trial flow diagram more often (p<0.001). We found significant improvements in reporting quality of RCTs published in high-impact factor journals over the last fifteen years. These improvements are likely attributed to concerted international efforts to improve reporting quality such as CONSORT. There is still much room for improvement, especially among specialized journals.

High-Protein and High–Dietary Fiber Breakfasts Result in Equal Feelings of Fullness and Better Diet Quality in Low-Income Preschoolers Compared with Their Usual Breakfast123

PubMed Central

Kranz, Sibylle; Brauchla, Mary; Campbell, Wayne W; Mattes, Rickard D

2017-01-01

Background: In the United States, 17% of children are currently obese. Increasing feelings of fullness may prevent excessive energy intake, lead to better diet quality, and promote long-term maintenance of healthy weight. Objective: The purpose of this study was to develop a fullness-rating tool (aim 1) and to determine whether a high-protein (HP), high-fiber (HF), and combined HP and HF (HPHF) breakfast increases preschoolers’ feelings of fullness before (pre) and after (post) breakfast and pre-lunch, as well as their diet quality, as measured by using a composite diet quality assessment tool, the Revised Children’s Diet Quality Index (aim 2). Methods: Children aged 4 and 5 y (n = 41; 22 girls and 19 boys) from local Head Start centers participated in this randomized intervention trial. Sixteen percent of boys and 32% of girls were overweight or obese. After the baseline week, children rotated through four 1-wk periods of consuming ad libitum HP (19–20 g protein), HF (10–11 g fiber), HPHF (19–21 g protein, 10–12 g fiber), or usual (control) breakfasts. Food intake at breakfast was estimated daily, and for breakfast, lunch, and snack on day 3 of each study week Student’s t tests and ANOVA were used to determine statistical differences. Results: Children’s post-breakfast and pre-lunch fullness ratings were ≥1 point higher than those of pre-breakfast (aim 1). Although children consumed, on average, 65 kcal less energy during the intervention breakfasts (P < 0.007) than during the control breakfast, fullness ratings did not differ (P = 0.76). Relative to the control breakfast, improved diet quality (12%) was calculated for the HP and HF breakfasts (P < 0.027) but not for the HPHF breakfast (aim 2). Conclusions: Post-breakfast fullness ratings were not affected by the intervention breakfasts relative to the control breakfast. HP and HF breakfasts resulted in higher diet quality. Serving HP or HF breakfasts may be valuable in improving diet quality without lowering feelings of satiation or satiety. This trial was registered at clinicaltrials.gov as NCT02122224. PMID:28077732

CALL FOR PAPERS: 13th International Conference on Force and Mass Measurement

NASA Astrophysics Data System (ADS)

1992-01-01

10 14 May 1993, Helsinki Fair Centre, Finland Scope of the Conference The Conference reports and reviews the state of the art and future trends in force and mass measurements in science and industry. Emphasis is on the applications of new methods, current problems in calibration and quality control, as well as on advancements in new sensor technologies and industrial application of force and mass measurements. Main Themes and Topics 1. The state of the art and development trends in force and mass measurements Development and stability of high level mass standards Mass comparators and force standard machine New research topics in mass and force 2. Calibration and quality control Calibration methods Estimation of uncertainties and classification of accuracies Relations between calibration, testing and quality control Requirements for quality control Verification of weighing instruments and their main devices 3. Application of force and mass measurements Automatic weighing Mass flow measurements Quality control in process industry Sensor technologies Practical applications Special applications in industry, trade, etc. Deadline for submission of abstracts: 30 June 1992. For further information please contact: Finnish Society of Automation, Asemapäällikönkatu 12C, SF-00520 HELSINKI, Finland Phone: Int. +3580 1461 644, Fax: Int. +3580 1461 650

VERIFYING THE VOC CONTROL PERFORMANCE OF BIOREACTORS

EPA Science Inventory

The paper describes the verification testing approach used to collect high-quality, peer-reviewed data on the performance of bioreaction-based technologies for the control of volatile organic compounds (VOCs). The verification protocol that describes the approach for these tests ...

Standard care quality determines treatment outcomes in control groups of HAART-adherence intervention studies: implications for the interpretation and comparison of intervention effects.

PubMed

de Bruin, Marijn; Viechtbauer, Wolfgang; Hospers, Harm J; Schaalma, Herman P; Kok, Gerjo

2009-11-01

Clinical trials of behavioral interventions seek to enhance evidence-based health care. However, in case the quality of standard care provided to control conditions varies between studies and affects outcomes, intervention effects cannot be directly interpreted or compared. The objective of the present study was to examine whether standard care quality (SCQ) could be reliably assessed, varies between studies of highly active antiretroviral HIV-adherence interventions, and is related to the proportion of patients achieving an undetectable viral load ("success rate"). Databases were searched for relevant articles. Authors of selected studies retrospectively completed a checklist with standard care activities, which were coded to compute SCQ scores. The relationship between SCQ and the success rates was examined using meta-regression. Cronbach's alpha, variability in SCQ, and relation between SCQ and success rate. Reliability of the SCQ instrument was high (Cronbach's alpha = .91). SCQ scores ranged from 3.7 to 27.8 (total range = 0-30) and were highly predictive of success rate (p = .002). Variation in SCQ provided to control groups may substantially influence effect sizes of behavior change interventions. Future trials should therefore assess and report SCQ, and meta-analyses should control for variability in SCQ, thereby producing more accurate estimates of the effectiveness of behavior change interventions. PsycINFO Database Record (c) 2009 APA, all rights reserved.

Effectiveness of a physical activity program on weight, physical fitness, occupational stress, job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study.

PubMed

Fang, Yun-Ya; Huang, Chien-Yuan; Hsu, Mei-Chi

2018-03-27

This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Participants in the intervention group (n = 37) were instructed to carry out a PA program at moderate intensity for 60 min/session, 3 sessions/week for 12 weeks. Those in the control group (n = 38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.

Strong Photoluminescence Enhancement in All-Dielectric Fano Metasurface with High Quality Factor.

PubMed

Yuan, Shuai; Qiu, Xingzhi; Cui, Chengcong; Zhu, Liangqiu; Wang, Yuxi; Li, Yi; Song, Jinwen; Huang, Qingzhong; Xia, Jinsong

2017-11-28

All-dielectric metamaterials offer great flexibility for controlling light-matter interaction, owing to their strong electric and magnetic resonances with negligible loss at wavelengths above the material bandgap. Here, we propose an all-dielectric asymmetric metasurface structure exhibiting high quality factor and prominent Fano line shape. Over three-orders photoluminescence enhancement is demonstrated in the fabricated all-dielectric metasurface with record-high quality factor of 1011. We find this strong emission enhancement is attributed to the coherent Fano resonances, which originate from the destructive interferences of antisymmetric displacement currents in the asymmetric all-dielectric metasurface. Our observations show a promising approach to realize light emitters based on all-dielectric metasurfaces.

Effect of home care service on the quality of life in patients with gynecological cancer.

PubMed

Aktas, Demet; Terzioglu, Fusun

2015-01-01

The purpose of the research was to determine the effect of home care service on the quality of life in patients with gynecological cancer. This randomized case control study was carried out in a womans hospital between September 2011 and February 2012. Women undergoing gynecological cancer treatment were separated into intervention and control groups, of 35 patients each. The intervention group was provided with nursing care service through hospital and home visits (1st, 12th weeks) within the framework of a specifically developed nursing care plan. The control group was monitored without any intervention through the hospital routine protocols (1st, 12th weeks). Data were collected using An Interview Form, Home Visit Monitoring Form and Quality of Life Scale/Cancer Survivors. Effects of home care service on the quality of life in gynecological cancer patients were investigated using chi-square tests, McNemar's test, independent t-test and ANOVA. This study found that the intervention group receiving home care service had a moderately high quality of life (average mean: 6.01±0.64), while the control group had comparatively lower quality (average mean: 4.35±0.79) within the 12 week post- discharge period (p<0.05). This study found home care services to be efficient in improving the quality of life in patients with gynecological cancer.

An Automated Treatment Plan Quality Control Tool for Intensity-Modulated Radiation Therapy Using a Voxel-Weighting Factor-Based Re-Optimization Algorithm

PubMed Central

Song, Ting; Li, Nan; Zarepisheh, Masoud; Li, Yongbao; Gautier, Quentin; Zhou, Linghong; Mell, Loren; Jiang, Steve; Cerviño, Laura

2016-01-01

Intensity-modulated radiation therapy (IMRT) currently plays an important role in radiotherapy, but its treatment plan quality can vary significantly among institutions and planners. Treatment plan quality control (QC) is a necessary component for individual clinics to ensure that patients receive treatments with high therapeutic gain ratios. The voxel-weighting factor-based plan re-optimization mechanism has been proved able to explore a larger Pareto surface (solution domain) and therefore increase the possibility of finding an optimal treatment plan. In this study, we incorporated additional modules into an in-house developed voxel weighting factor-based re-optimization algorithm, which was enhanced as a highly automated and accurate IMRT plan QC tool (TPS-QC tool). After importing an under-assessment plan, the TPS-QC tool was able to generate a QC report within 2 minutes. This QC report contains the plan quality determination as well as information supporting the determination. Finally, the IMRT plan quality can be controlled by approving quality-passed plans and replacing quality-failed plans using the TPS-QC tool. The feasibility and accuracy of the proposed TPS-QC tool were evaluated using 25 clinically approved cervical cancer patient IMRT plans and 5 manually created poor-quality IMRT plans. The results showed high consistency between the QC report quality determinations and the actual plan quality. In the 25 clinically approved cases that the TPS-QC tool identified as passed, a greater difference could be observed for dosimetric endpoints for organs at risk (OAR) than for planning target volume (PTV), implying that better dose sparing could be achieved in OAR than in PTV. In addition, the dose-volume histogram (DVH) curves of the TPS-QC tool re-optimized plans satisfied the dosimetric criteria more frequently than did the under-assessment plans. In addition, the criteria for unsatisfied dosimetric endpoints in the 5 poor-quality plans could typically be satisfied when the TPS-QC tool generated re-optimized plans without sacrificing other dosimetric endpoints. In addition to its feasibility and accuracy, the proposed TPS-QC tool is also user-friendly and easy to operate, both of which are necessary characteristics for clinical use. PMID:26930204

Fitting relationship between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam

NASA Astrophysics Data System (ADS)

Ji, Zhong-Ye; Zhang, Xiao-Fang

2018-01-01

The mathematical relation between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam is important in beam quality control theory of the high-energy laser weapon system. In order to obtain this mathematical relation, numerical simulation is used in the research. Firstly, the Zernike representations of typically distorted atmospheric wavefront aberrations caused by the Kolmogoroff turbulence are generated. And then, the corresponding beam quality β factors of the different distorted wavefronts are calculated numerically through fast Fourier transform. Thus, the statistical distribution rule between the beam quality β factors of high-energy laser and the wavefront aberrations of the beam can be established by the calculated results. Finally, curve fitting method is chosen to establish the mathematical fitting relationship of these two parameters. And the result of the curve fitting shows that there is a quadratic curve relation between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam. And in this paper, 3 fitting curves, in which the wavefront aberrations are consisted of Zernike Polynomials of 20, 36, 60 orders individually, are established to express the relationship between the beam quality β factor and atmospheric wavefront aberrations with different spatial frequency.

Efficacy of a Sleep Quality Intervention in People With Low Back Pain: Protocol for a Feasibility Randomized Co-Twin Controlled Trial.

PubMed

Pinheiro, Marina B; Ho, Kevin K; Ferreira, Manuela L; Refshauge, Kathryn M; Grunstein, Ron; Hopper, John L; Maher, Christopher G; Koes, Bart W; Ordoñana, Juan R; Ferreira, Paulo H

2016-10-01

Poor sleep quality is highly prevalent in patients with low back pain (LBP) and is associated with high levels of pain, psychological distress, and physical disability. Studies have reported a bidirectional relationship between sleep problems and intensity of LBP. Accordingly, effective management of LBP should address sleep quality. In addition, genetics has been found to significantly affect the prevalence of both LBP and insomnia. Our study aims to establish the feasibility of a trial exploring the efficacy of a web-based sleep quality intervention in people with LBP, with the genetic influences being controlled for. 30 twins (15 complete pairs) with subacute or chronic LBP (>6 weeks) will be recruited from the Australian Twin Registry. Participants will be randomly assigned to one of the two groups with each twin within a pair receiving either an interactive web-based sleep intervention based on cognitive behavioral therapy principles (intervention) or a web-based education program (control) for 6 weeks. The feasibility of the trial will be investigated with regard to recruitment rate, feasibility of data collection and outcome measure completion, contamination of intervention, acceptability and experience of intervention, and sample size requirement for the full trial. Patient outcomes will be collected electronically at baseline, immediately post-treatment, and at 3-months' follow-up post-randomization. This trial employs a robust design that will effectively control for the influence of genetics on treatment effect. Additionally, this study addresses sleep quality, a significant but under-explored issue in LBP. Results will inform the design and implementation of the definitive trial.

Nonlinear Multiobjective MPC-Based Optimal Operation of a High Consistency Refining System in Papermaking

DOE PAGES

Li, Mingjie; Zhou, Ping; Wang, Hong; ...

2017-09-19

As one of the most important unit in the papermaking industry, the high consistency (HC) refining system is confronted with challenges such as improving pulp quality, energy saving, and emissions reduction in its operation processes. Here in this correspondence, an optimal operation of HC refining system is presented using nonlinear multiobjective model predictive control strategies that aim at set-point tracking objective of pulp quality, economic objective, and specific energy (SE) consumption objective, respectively. First, a set of input and output data at different times are employed to construct the subprocess model of the state process model for the HC refiningmore » system, and then the Wiener-type model can be obtained through combining the mechanism model of Canadian Standard Freeness and the state process model that determines their structures based on Akaike information criterion. Second, the multiobjective optimization strategy that optimizes both the set-point tracking objective of pulp quality and SE consumption is proposed simultaneously, which uses NSGA-II approach to obtain the Pareto optimal set. Furthermore, targeting at the set-point tracking objective of pulp quality, economic objective, and SE consumption objective, the sequential quadratic programming method is utilized to produce the optimal predictive controllers. In conclusion, the simulation results demonstrate that the proposed methods can make the HC refining system provide a better performance of set-point tracking of pulp quality when these predictive controllers are employed. In addition, while the optimal predictive controllers orienting with comprehensive economic objective and SE consumption objective, it has been shown that they have significantly reduced the energy consumption.« less

Nonlinear Multiobjective MPC-Based Optimal Operation of a High Consistency Refining System in Papermaking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Mingjie; Zhou, Ping; Wang, Hong

As one of the most important unit in the papermaking industry, the high consistency (HC) refining system is confronted with challenges such as improving pulp quality, energy saving, and emissions reduction in its operation processes. Here in this correspondence, an optimal operation of HC refining system is presented using nonlinear multiobjective model predictive control strategies that aim at set-point tracking objective of pulp quality, economic objective, and specific energy (SE) consumption objective, respectively. First, a set of input and output data at different times are employed to construct the subprocess model of the state process model for the HC refiningmore » system, and then the Wiener-type model can be obtained through combining the mechanism model of Canadian Standard Freeness and the state process model that determines their structures based on Akaike information criterion. Second, the multiobjective optimization strategy that optimizes both the set-point tracking objective of pulp quality and SE consumption is proposed simultaneously, which uses NSGA-II approach to obtain the Pareto optimal set. Furthermore, targeting at the set-point tracking objective of pulp quality, economic objective, and SE consumption objective, the sequential quadratic programming method is utilized to produce the optimal predictive controllers. In conclusion, the simulation results demonstrate that the proposed methods can make the HC refining system provide a better performance of set-point tracking of pulp quality when these predictive controllers are employed. In addition, while the optimal predictive controllers orienting with comprehensive economic objective and SE consumption objective, it has been shown that they have significantly reduced the energy consumption.« less

Rapid Training System Self-Assessment

ERIC Educational Resources Information Center

Flesher, Jeff

2007-01-01

A systematic self-assessment mirrors quality system and certification models, thus making a strong argument for high-quality design, control, and management of the training function. Accomplished for the ongoing betterment of the function, not as a summative judgment of conformance, it discovers strengths and weaknesses and results in a common…

Software quality assurance | News

Science.gov Websites

Measure was removed: "Sufficient level of detail in the requirements to develop test cases." ; This control measure was removed since the sufficient level of detail needed to develop test cases is recorded for all test cases. (Note: This is mandatory for applications graded with a High Quality Assurance

Successful Leadership in High Poverty, Urban Schools. Implications from UCEA

ERIC Educational Resources Information Center

Jacobson, Stephen; Terry Orr, M.; Young, Michelle D.

2008-01-01

Research shows that leadership matters in improving student achievement. In fact, among school-related factors over which policy makers have some control, effective leadership practices rank second only to the quality of teaching in influencing student learning (Leithwood, Louis, Anderson & Wahlstrom, 2004). Quality leadership is particularly…

75 FR 59973 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Control of Volatile...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-29

...; Cleaning of high precision optics; Stripping; Janitorial cleaning; cleaning of resin, coating, ink, and... laboratories; Cleaning operations in medical device or pharmaceutical manufacturing; and Cleaning operations related to performance or quality assurance testing of coatings, inks, or adhesives. COMAR 26.11.19.09-1...

A system identification approach for developing model predictive controllers of antibody quality attributes in cell culture processes

PubMed Central

Schmitt, John; Beller, Justin; Russell, Brian; Quach, Anthony; Hermann, Elizabeth; Lyon, David; Breit, Jeffrey

2017-01-01

As the biopharmaceutical industry evolves to include more diverse protein formats and processes, more robust control of Critical Quality Attributes (CQAs) is needed to maintain processing flexibility without compromising quality. Active control of CQAs has been demonstrated using model predictive control techniques, which allow development of processes which are robust against disturbances associated with raw material variability and other potentially flexible operating conditions. Wide adoption of model predictive control in biopharmaceutical cell culture processes has been hampered, however, in part due to the large amount of data and expertise required to make a predictive model of controlled CQAs, a requirement for model predictive control. Here we developed a highly automated, perfusion apparatus to systematically and efficiently generate predictive models using application of system identification approaches. We successfully created a predictive model of %galactosylation using data obtained by manipulating galactose concentration in the perfusion apparatus in serialized step change experiments. We then demonstrated the use of the model in a model predictive controller in a simulated control scenario to successfully achieve a %galactosylation set point in a simulated fed‐batch culture. The automated model identification approach demonstrated here can potentially be generalized to many CQAs, and could be a more efficient, faster, and highly automated alternative to batch experiments for developing predictive models in cell culture processes, and allow the wider adoption of model predictive control in biopharmaceutical processes. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:1647–1661, 2017 PMID:28786215

Summary of results of NASA F-15 flight research program

NASA Technical Reports Server (NTRS)

Burcham, F. W., Jr.; Trippensee, G. A.; Fisher, D. F.; Putnam, T. W.

1986-01-01

NASA conducted a multidisciplinary flight research program on the F-15 airplane. The program began in 1976 when two preproduction airplanes were obtained from the U.S. Air Force. Major projects involved stability and control, handling qualities, propulsion, aerodynamics, propulsion controls, and integrated propulsion-flight controls. Several government agencies and aerospace contractors were involved. In excess of 330 flights were flown, and over 85 papers and reports were published. This document describes the overall program, the projects, and the key results. The F-15 was demonstrated to be an excellent flight research vehicle, producing high-quality results.

Structural approaches to the study of oligosaccharides in glycoprotein quality control.

PubMed

Ito, Yukishige; Hagihara, Shinya; Matsuo, Ichiro; Totani, Kiichiro

2005-10-01

High-mannose-type oligosaccharides have been shown to play important roles in protein quality control. Several intracellular proteins, such as lectins, chaperones and glycan-processing enzymes, are involved in this process. These include calnexin/calreticulin, UDP-glucose:glycoprotein glucosyltransferase (UGGT), cargo receptors (such as VIP36 and ERGIC-53), mannosidase-like proteins (e.g. EDEM and Htm1p) and ubiquitin ligase (Fbs). They are thought to recognize high-mannose-type glycans with subtly different structures, although the precise specificities are yet to be clarified. In order to gain a clear understanding of these protein-carbohydrate interactions, comprehensive synthesis of high-mannose-type glycans was conducted. In addition, two approaches to the synthesis of artificial glycoproteins with homogeneous oligosaccharides were investigated. Furthermore, a novel substrate of UGGT was discovered.

ProSens: integrated production control by automated inspection planning and efficient multisensor metrology

NASA Astrophysics Data System (ADS)

Glaser, Ulf; Li, Zhichao; Bichmann, Stephan, II; Pfeifer, Tilo

2003-05-01

By China's entry into the WTO, Chinese as well as German companies are facing the question, how to minimize the risk of unfamiliar cooperation partners when developing products. The rise of customer demands concerning quality, product diversity and the reduction of expenses require flexibility and efficiency with reliable component suppliers. In order to build and strengthen sino-german cooperations, a manufacturing control using homogenized and efficient measures to assure high quality is of vital importance. Lack of unifications may cause identical measurements conducted at subcontractors or customers to be carried out with different measurement processes which leads to incomparable results. Rapidly growing company cooperations and simultaneously decreasing of manufacturing scope cause substantial difficulties when coordinating joint quality control activities. "ProSens," a sino-german project consortium consisting of industrial users, technology producers and research institutes, aims at improving selected production processes by: Creation of a homogeneous quality awareness in sino-german cooperations. Sensitization for process accompanying metrology at an early stage of product development. Increase of the process performance by the use of integrated metrology. Reduction of production time and cost. Unification of quality control of complex products by means of efficient measurement strategies and CAD-based inspection planning.

New approach for quality control in manufacturing process

NASA Astrophysics Data System (ADS)

Hanzah, Muhammad Radhi bin; Rahim, Wan Mohd Faizal Wan Abd; Khor, C. Y.; Ishak, Muhammad Ikman; Rosli, M. U.; Jamalludin, Mohd Riduan; Zakaria, M. S.; Nawi, M. A. M.

2017-09-01

This study was regulated exclusively in view of theoretical aspect and further research should be done to demonstrate it in the genuine circumstance. The structure of this investigation including two industrial visits, i.e. interviews and meeting with approved staff from each organization agents. This review is cut up into two sections. Aside from the perception, little gatherings with the staffs from both organizations are held. With the subtle elements, the review is begun up. The aim of the study is characterized as to enhance the assessment strategy at quality control station to minimize defect outflow to the following client. This is to investigate the underlying factor in ebb and flow quality control framework so that another strategy to enhance quality control framework can implemented. Quality is a basic characteristic to be instated so that the end goal to fulfill clients' need is achieved. After a long hypothetical review is made, the best answer for be actualized at QG station to beat defects outflow to the following customer is by photoelectric sensor. It is reasonable, simple to keep up and has a high affectability to identify the defective items at the QG station.

Disproportionation for growing copper nanowires and their controlled self-assembly facilitated by ligand exchange.

PubMed

Ye, Enyi; Zhang, Shuang-Yuan; Liu, Shuhua; Han, Ming-Yong

2011-03-07

The coating makes the wire bundle: High-quality free-standing copper nanowires have been successfully produced by disproportionation of Cu(+) in oleylamine. This provides an effective way to prepare high-quality copper nanowires, but also enriches synthetic routes to other nanostructures. These copper nanowires can self-assemble by surface ligand exchange of oleylamine with trioctylphosphine. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The Impact of Transformer Winding Connections of A Grid-Connected PV on Voltage Quality Improvement

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muljadi, Eduard; Tumbelaka, Hanny H.; Gao, Wenzhong

In this paper, the high-power PV plant is connected to the weak grid by means of a three-phase power transformer. The selection of transformer winding connection is critical especially when the PV inverter has a reactive power controller. In general, transformer winding connection can be arranged in star-star (with neutral earthed) or star-delta. The reactive power controller supports voltage regulation of the power system particularly under transient faults. Its control strategy is based on utilizing the grid currents to make a three-phase reactive unbalanced current with a small gain. The gain is determined by the system impedance. Simulation results exhibitmore » that the control strategy works very well particularly under disturbance conditions when the transformer winding connection is star-star with both neutrals grounded. The power quality in terms of the voltage quality is improved.« less

Quality control in the year 2000.

PubMed

Schade, B

1992-01-01

'Just-in-time' production is a prerequisite for a company to meet the challenges of competition. Manufacturing cycles have been so successfully optimized that release time now has become a significant factor. A vision for a major quality-control (QC) contribution to profitability in this decade seems to be the just-in-time release. Benefits will go beyond cost savings for lower inventory. The earlier detection of problems will reduce rejections and scrap. In addition, problem analysis and problem-solving will be easier. To achieve just-in-time release, advanced automated systems like robots will become the workhorses in QC for high volume pharmaceutical production. The requirements for these systems are extremely high in terms of quality, reliability and ruggedness. Crucial for the success might be advances in use of microelectronics for error checks, system recording, trouble shooting, etc. as well as creative new approaches (for example the use of redundant assay systems).

Quality control in the year 2000

PubMed Central

Schade, Bernd

1992-01-01

‘Just-in-time’ production is a prerequisite for a company to meet the challenges of competition. Manufacturing cycles have been so successfully optimized that release time now has become a significant factor. A vision for a major quality-control (QC) contribution to profitability in this decade seems to be the just-in-time release. Benefits will go beyond cost savings for lower inventory. The earlier detection of problems will reduce rejections and scrap. In addition, problem analysis and problem-solving will be easier. To achieve just-in-time release, advanced automated systems like robots will become the workhorses in QC for high volume pharmaceutical production. The requirements for these systems are extremely high in terms of quality, reliability and ruggedness. Crucial for the success might be advances in use of microelectronics for error checks, system recording, trouble shooting, etc. as well as creative new approaches (for example the use of redundant assay systems). PMID:18924930

Computer program CDCID: an automated quality control program using CDC update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singer, G.L.; Aguilar, F.

1984-04-01

A computer program, CDCID, has been developed in coordination with a quality control program to provide a highly automated method of documenting changes to computer codes at EG and G Idaho, Inc. The method uses the standard CDC UPDATE program in such a manner that updates and their associated documentation are easily made and retrieved in various formats. The method allows each card image of a source program to point to the document which describes it, who created the card, and when it was created. The method described is applicable to the quality control of computer programs in general. Themore » computer program described is executable only on CDC computing systems, but the program could be modified and applied to any computing system with an adequate updating program.« less

Flight Measurements of the Flying Qualities of a Lockheed P-80A Airplane (Army No. 44-85099): Lateral- and Directional-Stability and Control Characteristics

NASA Technical Reports Server (NTRS)

Anderson, Seth B.; Cooper, George E.

1947-01-01

This report contains the flight-test results of the lateral and directional-stability and control phase (including tests with wing-tip tanks) of a general flying-qualities investigation of the Lockheed P-80A airplane (Army No. 44-85099). These tests were conducted at indicated airspeeds up to 494 miles per hour (0.691 Mach number) at low altitude and up to 378 miles per hour (0.816 Mach number) at high altitude. These tests showed that the flying qualities of the airplane were for the most part in accordance with the requirements of the Army Air Forces Stability and Control Specifications. The only major deficiency noted was the negative lateral stability with the wing-tip tanks installed.

School Quality and the Development of Cognitive Skills between Age Four and Six

PubMed Central

Borghans, Lex; Golsteyn, Bart H. H.; Zölitz, Ulf

2015-01-01

This paper studies the extent to which young children develop their cognitive ability in high and low quality schools. We use a representative panel data set containing cognitive test scores of 4-6 year olds in Dutch schools. School quality is measured by the school’s average achievement test score at age 12. Our results indicate that children in high-quality schools develop their skills substantially faster than those in low-quality schools. The results remain robust to the inclusion of initial ability, parental background, and neighborhood controls. Moreover, using proximity to higher-achieving schools as an instrument for school choice corroborates the results. The robustness of the results points toward a causal interpretation, although it is not possible to erase all doubt about unobserved confounding factors. PMID:26182123

Sustaining High Quality Teaching and Evidence-based Curricula: Follow-up Assessment of Teachers in the REDI Project

PubMed Central

Bierman, Karen L; DeRousie, Rebecca M. Sanford; Heinrichs, Brenda; Domitrovich, Celene E.; Greenberg, Mark T.; Gill, Sukhdeep

2013-01-01

Recent research has validated the power of evidence-based preschool interventions to improve teaching quality and promote child school readiness when implemented in the context of research trials. However, very rarely are follow-up assessments conducted with teachers in order to evaluate the maintenance of improved teaching quality or sustained use of evidence-based curriculum components after the intervention trial. In the current study, we collected follow-up assessments of teachers one year after their involvement in the REDI research trial to evaluate the extent to which intervention teachers continued to implement the REDI curriculum components with high-quality, and to explore possible pre-intervention predictors of sustained implementation. In addition, we conducted classroom observations to determine whether general improvements in the teaching quality of intervention teachers (relative to control group teachers) were sustained. Results indicated sustained high-quality implementation of some curriculum components (the PATHS curriculum), but decreased implementation of other components (the language-literacy components). Sustained intervention effects were evident on most aspects of general teaching quality targeted by the intervention. Implications for practice and policy are discussed. PMID:24204101

Nickel-cadmium cells

NASA Technical Reports Server (NTRS)

Rubin, E. J.; Turchan, M. J.

1974-01-01

A high energy density nickel cadmium cell of aerospace quality was designed. The approach used was to utilize manufacturing techniques which produce highly uniform and controlled starting materials in addition to improvements in the overall design. Parameters controlling the production of plaque and both positive and negative plate were studied. Quantities of these materials were produced and prototype cells were assembled to test the proposed design.

The lack of adequate quality assurance/quality control data hinders the assessment of potential forest degradation in a national forest inventory

Treesearch

Thomas Brandeis; Stanley Zarnoch; Christopher Oswalt; Jeffery Stringer

2017-01-01

Hardwood lumber harvested from the temperate broadleaf and mixed broadleaf/conifer forests of the east-central United States is an important economic resource. Forest industry stakeholders in this region have a growing need for accurate, reliable estimates of high-quality wood volume. While lower-graded timber has an increasingly wide array of uses, the forest products...

Multi-application controls: Robust nonlinear multivariable aerospace controls applications

NASA Technical Reports Server (NTRS)

Enns, Dale F.; Bugajski, Daniel J.; Carter, John; Antoniewicz, Bob

1994-01-01

This viewgraph presentation describes the general methodology used to apply Honywell's Multi-Application Control (MACH) and the specific application to the F-18 High Angle-of-Attack Research Vehicle (HARV) including piloted simulation handling qualities evaluation. The general steps include insertion of modeling data for geometry and mass properties, aerodynamics, propulsion data and assumptions, requirements and specifications, e.g. definition of control variables, handling qualities, stability margins and statements for bandwidth, control power, priorities, position and rate limits. The specific steps include choice of independent variables for least squares fits to aerodynamic and propulsion data, modifications to the management of the controls with regard to integrator windup and actuation limiting and priorities, e.g. pitch priority over roll, and command limiting to prevent departures and/or undesirable inertial coupling or inability to recover to a stable trim condition. The HARV control problem is characterized by significant nonlinearities and multivariable interactions in the low speed, high angle-of-attack, high angular rate flight regime. Systematic approaches to the control of vehicle motions modeled with coupled nonlinear equations of motion have been developed. This paper will discuss the dynamic inversion approach which explicity accounts for nonlinearities in the control design. Multiple control effectors (including aerodynamic control surfaces and thrust vectoring control) and sensors are used to control the motions of the vehicles in several degrees-of-freedom. Several maneuvers will be used to illustrate performance of MACH in the high angle-of-attack flight regime. Analytical methods for assessing the robust performance of the multivariable control system in the presence of math modeling uncertainty, disturbances, and commands have reached a high level of maturity. The structured singular value (mu) frequency response methodology is presented as a method for analyzing robust performance and the mu-synthesis method will be presented as a method for synthesizing a robust control system. The paper concludes with the author's expectations regarding future applications of robust nonlinear multivariable controls.

Association mapping reveals the genetic architecture of tomato response to water deficit: focus on major fruit quality traits

PubMed Central

Albert, Elise; Segura, Vincent; Gricourt, Justine; Bonnefoi, Julien; Derivot, Laurent; Causse, Mathilde

2016-01-01

Water scarcity constitutes a crucial constraint for agriculture productivity. High-throughput approaches in model plant species identified hundreds of genes potentially involved in survival under drought, but few having beneficial effects on quality and yield. Nonetheless, controlled water deficit may improve fruit quality through higher concentration of flavor compounds. The underlying genetic determinants are still poorly known. In this study, we phenotyped 141 highly diverse small fruit tomato accessions for 27 traits under two contrasting watering conditions. A subset of 55 accessions exhibited increased metabolite contents and maintained yield under water deficit. Using 6100 single nucleotide polymorphisms (SNPs), association mapping revealed 31, 41, and 44 quantitative trait loci (QTLs) under drought, control, and both conditions, respectively. Twenty-five additional QTLs were interactive between conditions, emphasizing the interest in accounting for QTLs by watering regime interactions in fruit quality improvement. Combining our results with the loci previously identified in a biparental progeny resulted in 11 common QTLs and contributed to a first detailed characterization of the genetic determinants of response to water deficit in tomato. Major QTLs for fruit quality traits were dissected and candidate genes were proposed using expression and polymorphism data. The outcomes provide a basis for fruit quality improvement under deficit irrigation while limiting yield losses. PMID:27856709

Modeling, simulation, and flight characteristics of an aircraft designed to fly at 100,000 feet

NASA Technical Reports Server (NTRS)

Sim, Alex G.

1991-01-01

A manned real time simulation of a conceptual vehicle, the stratoplane, was developed to study the problems associated with the flight characteristics of a large, lightweight vehicle. Mathematical models of the aerodynamics, mass properties, and propulsion system were developed in support of the simulation and are presented. The simulation was at first conducted without control augmentation to determine the needs for a control system. The unaugmented flying qualities were dominated by lightly damped dutch roll oscillations. Constant pilot workloads were needed at high altitudes. Control augmentation was studied using basic feedbacks. For the longitudinal axis, flight path angle, and pitch rate feedback were sufficient to damp the phugoid mode and to provide good flying qualities. In the lateral directional axis, bank angle, roll rate, and yaw rate feedbacks were sufficient to provide a safe vehicle with acceptable handling qualities. Intentionally stalling the stratoplane to very high angles of attack (deep stall) was studied as a means of enable safe and rapid descent. It was concluded that the deep stall maneuver is viable for this class of vehicle.

Control of Protein Crystal Nucleation and Growth Using Stirring Solution

NASA Astrophysics Data System (ADS)

Niino, Ai; Adachi, Hiroaki; Takano, Kazufumi; Matsumura, Hiroyoshi; Kinoshita, Takayoshi; Warizaya, Masaichi; Inoue, Tsuyoshi; Mori, Yusuke; Sasaki, Takatomo

2004-11-01

We have previously developed a protein crystallization technique using a stirring protein solution and revealed that (i) continuous stirring prevents excess spontaneous nucleation and accelerates the growth of protein crystals and (ii) prestirring (solution stirring in advance) promotes the crystal nucleation of hen egg-white lysozyme. In bovine adenosine deaminase (ADA) crystallization, continuous stirring improves the crystal quality but elongates the nucleation time. In this paper, in order to control both the crystal nucleation and growth of ADA using a Micro-Stirring technique, we carried out five different stirring patterns such as (i) no stirring, (ii) continuous stirring, (iii) prestirring, (iv) poststirring (stirring late in the growth period) and (v) restirring (combined pre- and poststirring). The results showed that high-quality well-shaped crystals were obtained under the continuous stirring and restirring conditions and the nucleation time under the prestirring and restirring conditions was shorter than that under the continuous stirring and poststirring conditions. Consequently, high-quality crystals were promptly obtained under the restirring condition. These results suggest that we are able to control both the nucleation and growth of protein crystals with the stirring techniques.

Cancer patterns, trends, and transitions in Peru: a regional perspective.

PubMed

Piñeros, Marion; Ramos, Willy; Antoni, Sébastien; Abriata, Graciela; Medina, Luis E; Miranda, J Jaime; Payet, Eduardo; Bray, Freddie

2017-10-01

Peru, like several other South American countries, is experiencing remarkable population growth, ageing, and urbanisation, which has given rise to profound changes in its epidemiological profile. Prostate and breast cancer are the most frequent cancers in men and women, respectively, in Lima and Arequipa, the two areas with population-based cancer registries. However, infection-associated cancers (cervix and stomach) are also common, and rank highest in the national cancer mortality profile. Although a foundation of surveillance informs cancer-control initiatives in Peru, improvements in the vital statistics system, and the quality and use of incidence data for the planning and assessment of cancer prevention and control actions, are needed. Existing population-based cancer registries in Lima and Arequipa, and linkages to the established national mandatory cancer reporting system, are crucial for the collection of high-quality data on national cancer incidence. The delivery of effective cancer prevention and control measures requires sustained investment in the collection of high-quality data capable of informing policies and driving research programmes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Continuous Spectrum LEDs Promote Seedling Quality Traits and Performance of Quercus ithaburensis var. macrolepis

PubMed Central

Smirnakou, Sonia; Ouzounis, Theoharis; Radoglou, Kalliopi M.

2017-01-01

Regulation of the growth, development, and quality of plants by the control of light quality has attracted extensive attention worldwide. The aim of this study was to examine the effects of continuous LED spectrum for indoor plant pre-cultivation and to investigate the morphological and physiological responses of a common broadleaved tree species in Mediterranean environment, Quercus ithaburensis var. macrolepis at seedling developmental stage. Thus, the seedlings were pre-cultivated for 28 days, under five different LED light qualities: (1) Fluorescent (FL) as control light (2) L20AP67 (high in green and moderate in far-red), (3) AP673L (high in green and red), (4) G2 (highest in red and far-red), AP67 (high in blue, red, and far-red), and (5) NS1 (highest in blue and green and lowest in far-red) LEDs. Further examination was held at the nursery for 1 year, on several seedling quality traits. Indeed, AP67 and AP673L triggered higher leaf formation, while L20AP67 positively affected seedling shoot development. NS1 and AP67 LED pre-cultivated seedlings showed significantly higher root fibrosity than those of FL light. Furthermore, NS1 and AP673L LEDs induced fourfold increase on seedling root dry weight than FL light. Hence, evaluating the seedling nursery performance attributes, most of those photomorphogenetic responses previously obtained were still detectable. Even more so, LED pre-cultivated seedlings showed higher survival and faster growth indicating better adaptation even under natural light conditions, a fact further reinforced by the significantly higher Dickson’s quality index acquired. In conclusion, the goal of each nursery management program is the production of high quality seedlings with those desirable traits, which in turn satisfy the specific needs for a particular reforestation site. Thus, the enhanced oak seedling quality traits formed under continuous LEDs spectrum especially of NS1 and AP673L pre-cultivation may potentially fulfill this goal. PMID:28261244

KAT: a K-mer analysis toolkit to quality control NGS datasets and genome assemblies.

PubMed

Mapleson, Daniel; Garcia Accinelli, Gonzalo; Kettleborough, George; Wright, Jonathan; Clavijo, Bernardo J

2017-02-15

De novo assembly of whole genome shotgun (WGS) next-generation sequencing (NGS) data benefits from high-quality input with high coverage. However, in practice, determining the quality and quantity of useful reads quickly and in a reference-free manner is not trivial. Gaining a better understanding of the WGS data, and how that data is utilized by assemblers, provides useful insights that can inform the assembly process and result in better assemblies. We present the K-mer Analysis Toolkit (KAT): a multi-purpose software toolkit for reference-free quality control (QC) of WGS reads and de novo genome assemblies, primarily via their k-mer frequencies and GC composition. KAT enables users to assess levels of errors, bias and contamination at various stages of the assembly process. In this paper we highlight KAT's ability to provide valuable insights into assembly composition and quality of genome assemblies through pairwise comparison of k-mers present in both input reads and the assemblies. KAT is available under the GPLv3 license at: https://github.com/TGAC/KAT . bernardo.clavijo@earlham.ac.uk. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms.

PubMed

Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

2013-12-21

Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards.

Quality charters or quality members? A control theory perspective on team charters and team performance.

PubMed

Courtright, Stephen H; McCormick, Brian W; Mistry, Sal; Wang, Jiexin

2017-10-01

Though prevalent in practice, team charters have only recently received scholarly attention. However, most of this work has been relatively devoid of theory, and consequently, key questions about why and under what conditions team charter quality affects team performance remain unanswered. To address these gaps, we draw on macro organizational control theory to propose that team charter quality serves as a team-level "behavior" control mechanism that builds task cohesion through a structured exercise. We then juxtapose team charter quality with an "input" team control mechanism that influences the emergence of task cohesion more organically: team conscientiousness. Given their redundant effects on task cohesion, we propose that the effects of team charter quality and team conscientiousness on team performance (through task cohesion) are substitutive such that team charter quality primarily impacts team performance for teams that are low (vs. high) on conscientiousness. We test and find support for our hypotheses in a sample of 239 undergraduate self-managing project teams. Our study contributes to the groups and teams literature in the following ways: first, relative to previous studies, we take a more theory-driven approach toward understanding team charters, and in doing so, uncover when and why team charter quality impacts team performance; second, we integrate two normally disparate perspectives on team effectiveness (team development and team selection) to offer a broader perspective on how teams are "built"; and third, we introduce team charter quality as a performance-enhancing mechanism for teams lower on conscientiousness. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Diabetes self-management, depressive symptoms, quality of life and metabolic control in youth with type 1 diabetes in China.

PubMed

Guo, Jia; Whittemore, Robin; Grey, Margaret; Wang, Jing; Zhou, Zhi-Guang; He, Guo-Ping

2013-01-01

To assess diabetes self-management, depressive symptoms, quality of life and metabolic control in a cohort of youth with type 1 diabetes in mainland China. Predictors of self-management and depressive symptoms were also explored. Studies have shown that adaptation to childhood chronic illness is important in determining outcomes. Few studies have been reported on the behavioural, psychosocial and physiological adaptation processes and outcomes in Chinese youth with type 1 diabetes. This is a cross-sectional study as part of a multi-site longitudinal descriptive study. Data for this report were collected at baseline. A convenience sample of 136 eligible youth was recruited during follow-up visits in hospitals in 14 major cities of Hunan Province (located in central southern mainland China) from July 2009-October 2010. Data were collected on socio-demographic background, clinical characteristics, diabetes self-management, depressive symptoms, quality of life and metabolic control. Diabetes self-management was lower in Chinese youth compared with a US cohort and was associated with insulin treatment regimen, treatment location, depressive symptoms and gender. A total of 17·6% of youth reported high depressive symptoms, and depressive symptoms were correlated with family annual revenue, school attendance, peer relationship and parent-child relationship. The mean score of global satisfaction with quality of life was 17·14 ± 3·58. The mean HbA1c was 9·68%. Living with type 1 diabetes poses considerable challenges, and Chinese youth report lower self-management than US youth and high depressive symptoms. Metabolic control and quality of life were sub-optimal. More clinic visits, treatment for high depressive symptoms and an intensive insulin regimen may improve diabetes self-management for youth with type 1 diabetes in China. Culturally appropriate interventions aimed at helping them adapt to living with the disease and improving outcomes are urgently needed. © 2012 Blackwell Publishing Ltd.

Do psychological interventions reduce depression in hemodialysis patients?: A meta-analysis of randomized controlled trials following PRISMA.

PubMed

Xing, Lu; Chen, Ruiqi; Diao, Yongshu; Qian, Jiahui; You, Chao; Jiang, Xiaolian

2016-08-01

Depression is highly prevalent in hemodialysis patients and results in poor patient outcomes. Although psychological interventions are being developed and used for these patients, there is uncertainty regarding the effectiveness of these interventions. The purpose of this meta-analysis is to evaluate the effects of psychological interventions on depression treatment in hemodialysis patients. All randomized controlled trials (RCTs) relevant to the depression treatment of hemodialysis patients through psychological interventions were retrieved from the following databases: Embase, Pubmed, PsycINFO, the Cochrane Database of Systematic Reviews, and the Cochrane Central Register of Controlled Trials. The reference lists of identified RCTs were also screened. The Cochrane risk of bias tool was used to evaluate the quality of the studies, RevMan (5.3) was used to analyze the data, and the evidence quality of the combined results was evaluated using GRADE (3.6.1). Eight RCTs were included. The combined results showed that psychological interventions significantly reduced the scores of the Beck Depression Inventory (P<0.001) and interdialysis weight gain (P<0.001). However, due to the high heterogeneity, effect size combinations of sleep quality and quality of life were not performed. Psychological interventions may reduce the degree of depression and improve fluid intake restriction adherence. More rigorously designed research is needed.

Effects on work ability, job strain and quality of life of monitoring depression using a self-assessment instrument in recurrent general practitioner consultations: A randomized controlled study.

PubMed

Petersson, E-L; Wikberg, C; Westman, J; Ariai, N; Nejati, S; Björkelund, C

2018-05-01

Depression reduces individuals' function and work ability and is associated with both frequent and long-term sickness absence. Investigate if monitoring of depression course using a self-assessment instrument in recurrent general practitioner (GP) consultations leads to improved work ability, decreased job strain, and quality of life among primary care patients. Primary care patients n = 183, who worked. In addition to regular treatment (control group), intervention patients received evaluation and monitoring and used the MADRS-S depression scale during GP visit at baseline and at visits 4, 8, and 12 weeks. Work ability, quality of life and job strain were outcome measures. Depression symptoms decreased in all patients. Significantly steeper increase of WAI at 3 months in the intervention group. Social support was perceived high in a significantly higher frequency in intervention group compared to control group. Monitoring of depression course using a self-assessment instrument in recurrent GP consultations seems to lead to improved self-assessed work ability and increased high social support, but not to reduced job strain or increased quality of life compared to TAU. Future studies concerning rehabilitative efforts that seek to influence work ability probably also should include more active interventions at the workplace.

Complete Quantum Control of a Single Silicon-Vacancy Center in a Diamond Nanopillar

NASA Astrophysics Data System (ADS)

Zhang, Jingyuan Linda; Lagoudakis, Konstantinos G.; Tzeng, Yan-Kai; Dory, Constantin; Radulaski, Marina; Kelaita, Yousif; Shen, Zhi-Xun; Melosh, Nicholas A.; Chu, Steven; Vuckovic, Jelena

Coherent quantum control of a quantum bit (qubit) is an important step towards its use in a quantum network. SiV- center in diamond offers excellent physical qualities such as low inhomogeneous broadening, fast photon emission, and a large Debye-Waller factor, while the fast spin manipulation and techniques to extend the spin coherence time are under active investigation. Here, we demonstrate full coherent control over the state of a single SiV- center in a diamond nanopillar using ultrafast optical pulses. The high quality of the chemical vapor deposition grown SiV- centers allows us to coherently manipulate and quasi-resonantly read out the state of the single SiV- center. Moreover, the SiV- centers being coherently controlled are integrated into diamond nanopillar arrays in a site-controlled, individually addressable manner with high yield, low strain, and high spectral stability, which paves the way for scalable on chip optically accessible quantum system in a quantum photonic network. Financial support is provided by the DOE Office of Basic Energy Sciences, Division of Materials Sciences through Stanford Institute for Materials and Energy Sciences (SIMES) under contract DE-AC02-76SF00515.

Advanced Wavefront Control Techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Olivier, S S; Brase, J M; Avicola, K

2001-02-21

Programs at LLNL that involve large laser systems--ranging from the National Ignition Facility to new tactical laser weapons--depend on the maintenance of laser beam quality through precise control of the optical wavefront. This can be accomplished using adaptive optics, which compensate for time-varying aberrations that are often caused by heating in a high-power laser system. Over the past two decades, LLNL has developed a broad capability in adaptive optics technology for both laser beam control and high-resolution imaging. This adaptive optics capability has been based on thin deformable glass mirrors with individual ceramic actuators bonded to the back. In themore » case of high-power lasers, these adaptive optics systems have successfully improved beam quality. However, as we continue to extend our applications requirements, the existing technology base for wavefront control cannot satisfy them. To address this issue, this project studied improved modeling tools to increase our detailed understanding of the performance of these systems, and evaluated novel approaches to low-order wavefront control that offer the possibility of reduced cost and complexity. We also investigated improved beam control technology for high-resolution wavefront control. Many high-power laser systems suffer from high-spatial-frequency aberrations that require control of hundreds or thousands of phase points to provide adequate correction. However, the cost and size of current deformable mirrors can become prohibitive for applications requiring more than a few tens of phase control points. New phase control technologies are becoming available which offer control of many phase points with small low-cost devices. The goal of this project was to expand our wavefront control capabilities with improved modeling tools, new devices that reduce system cost and complexity, and extensions to high spatial and temporal frequencies using new adaptive optics technologies. In FY 99, the second year of this project, work was performed in four areas (1) advanced modeling tools for deformable mirrors (2) low-order wavefront correctors with Alvarez lenses, (3) a direct phase measuring heterdyne wavefront sensor, and (4) high-spatial-frequency wavefront control using spatial light modulators.« less

Research on Objectives for High-School Biology

ERIC Educational Resources Information Center

Korgan, John J., Jr.; Wilson, John T.

1973-01-01

Describes procedures to develop instructional objectives for high school biology. Two kinds of objectives are identified as pre-objectives and performance objectives. Models to classify these in branches of biology and to ensure quality control are provided. (PS)

Development and flight evaluation of an augmented stability active controls concept with a small horizontal tail

NASA Technical Reports Server (NTRS)

Rising, J. J.; Kairys, A. A.; Maass, C. A.; Siegart, C. D.; Rakness, W. L.; Mijares, R. D.; King, R. W.; Peterson, R. S.; Hurley, S. R.; Wickson, D.

1982-01-01

A limited authority pitch active control system (PACS) was developed for a wide body jet transport (L-1011) with a flying horizontal stabilizer. Two dual channel digital computers and the associated software provide command signals to a dual channel series servo which controls the stabilizer power actuators. Input sensor signals to the computer are pitch rate, column-trim position, and dynamic pressure. Control laws are given for the PACS and the system architecture is defined. The piloted flight simulation and vehicle system simulation tests performed to verify control laws and system operation prior to installation on the aircraft are discussed. Modifications to the basic aircraft are described. Flying qualities of the aircraft with the PACS on and off were evaluated. Handling qualities for cruise and high speed flight conditions with the c.g. at 39% mac ( + 1% stability margin) and PACS operating were judged to be as good as the handling qualities with the c.g. at 25% (+15% stability margin) and PACS off.

ATAD control goals through the analysis of process variables and evaluation of quality, production and cost.

PubMed

Nájera, S; Gil-Martínez, M; Zambrano, J A

2015-01-01

The aim of this paper is to establish and quantify different operational goals and control strategies in autothermal thermophilic aerobic digestion (ATAD). This technology appears as an alternative to conventional sludge digestion systems. During the batch-mode reaction, high temperatures promote sludge stabilization and pasteurization. The digester temperature is usually the only online, robust, measurable variable. The average temperature can be regulated by manipulating both the air injection and the sludge retention time. An improved performance of diverse biochemical variables can be achieved through proper manipulation of these inputs. However, a better quality of treated sludge usually implies major operating costs or a lower production rate. Thus, quality, production and cost indices are defined to quantify the outcomes of the treatment. Based on these, tradeoff control strategies are proposed and illustrated through some examples. This paper's results are relevant to guide plant operators, to design automatic control systems and to compare or evaluate the control performance on ATAD systems.

High quality atomically thin PtSe2 films grown by molecular beam epitaxy

NASA Astrophysics Data System (ADS)

Yan, Mingzhe; Wang, Eryin; Zhou, Xue; Zhang, Guangqi; Zhang, Hongyun; Zhang, Kenan; Yao, Wei; Lu, Nianpeng; Yang, Shuzhen; Wu, Shilong; Yoshikawa, Tomoki; Miyamoto, Koji; Okuda, Taichi; Wu, Yang; Yu, Pu; Duan, Wenhui; Zhou, Shuyun

2017-12-01

Atomically thin PtSe2 films have attracted extensive research interests for potential applications in high-speed electronics, spintronics and photodetectors. Obtaining high quality thin films with large size and controlled thickness is critical. Here we report the first successful epitaxial growth of high quality PtSe2 films by molecular beam epitaxy. Atomically thin films from 1 ML to 22 ML have been grown and characterized by low-energy electron diffraction, Raman spectroscopy and x-ray photoemission spectroscopy. Moreover, a systematic thickness dependent study of the electronic structure is revealed by angle-resolved photoemission spectroscopy (ARPES), and helical spin texture is revealed by spin-ARPES. Our work provides new opportunities for growing large size single crystalline films to investigate the physical properties and potential applications of PtSe2.

Poster - Thur Eve - 76: A quality control to achieve planning consistency in arc radiotherapy of the prostate.

PubMed

Zeng, G; Murphy, J; Annis, S-L; Wu, X; Wang, Y; McGowan, T; Macpherson, M

2012-07-01

To report a quality control program in prostate radiation therapy at our center that includes semi-automated planning process to generate high quality plans and in-house software to track plan quality in the subsequent clinical application. Arc planning in Eclipse v10.0 was preformed for both intact prostate and post-prostatectomy treatments. The planning focuses on DVH requirements and dose distributions being able to tolerate daily setup variations. A modified structure set is used to standardize the optimization, including short rectum and bladder in the fields to effectively tighten dose to target and a rectum expansion with 1cm cropped from PTV to block dose and shape posterior isodose lines. Structure, plan and optimization templates are used to streamline plan generation. DVH files are exported from Eclipse to a quality tracking software with GUI written in Matlab that can report the dose-volume data either for an individual patient or over a patient population. For 100 intact prostate patients treated with 78Gy, rectal D50, D25, D15 and D5 are 30.1±6.2Gy, 50.6±7.9Gy, 65.9±6.0Gy and 76.6±1.4Gy respectively, well below the limits 50Gy, 65Gy, 75Gy and 78Gy respectively. For prostate bed with prescription of 66Gy, rectal D50 is 35.9±6.9Gy. In both sites, PTV is covered by 95% prescription and the hotspots are less than 5%. The semi-automated planning method can efficiently create high quality plans while the tracking software can monitor the feedback from clinical application. It is a comprehensive and robust quality control program in radiation therapy. © 2012 American Association of Physicists in Medicine.

Research and development of intelligent controller for high-grade sanitary ware

NASA Astrophysics Data System (ADS)

Bao, Kongjun; Shen, Qingping

2013-03-01

With the social and economic development and people's living standards improve, more and more emphasis on modern society, people improve the quality of family life, the use of intelligent controller applications in high-grade sanitary ware physiotherapy students. Analysis of high-grade sanitary ware physiotherapy common functions pointed out in the production and use of the possible risks, proposed implementation of the system hardware and matching, given the system software implementation process. High-grade sanitary ware physiotherapy intelligent controller not only to achieve elegant and beautiful, simple, physical therapy, water power, deodorant, multi-function, intelligent control, to meet the consumers, the high-end sanitary ware market, strong demand, Accelerate the enterprise product Upgrade and improve the competitiveness of enterprises.

Automatic-Control System for Safer Brazing

NASA Technical Reports Server (NTRS)

Stein, J. A.; Vanasse, M. A.

1986-01-01

Automatic-control system for radio-frequency (RF) induction brazing of metal tubing reduces probability of operator errors, increases safety, and ensures high-quality brazed joints. Unit combines functions of gas control and electric-power control. Minimizes unnecessary flow of argon gas into work area and prevents electrical shocks from RF terminals. Controller will not allow power to flow from RF generator to brazing head unless work has been firmly attached to head and has actuated micro-switch. Potential shock hazard eliminated. Flow of argon for purging and cooling must be turned on and adjusted before brazing power applied. Provision ensures power not applied prematurely, causing damaged work or poor-quality joints. Controller automatically turns off argon flow at conclusion of brazing so potentially suffocating gas does not accumulate in confined areas.

Performance characterization of water recovery and water quality from chemical/organic waste products

NASA Technical Reports Server (NTRS)

Moses, W. M.; Rogers, T. D.; Chowdhury, H.; Cullingford, H. S.

1989-01-01

The water reclamation subsystems currently being evaluated for the Space Shuttle Freedom are briefly reviewed with emphasis on a waste water management system capable of processing wastes containing high concentrations of organic/inorganic materials. The process combines low temperature/pressure to vaporize water with high temperature catalytic oxidation to decompose volatile organics. The reclaimed water is of potable quality and has high potential for maintenance under sterile conditions. Results from preliminary experiments and modifications in process and equipment required to control reliability and repeatability of system operation are presented.

Pollution loads in urban runoff and sanitary wastewater.

PubMed

Taebi, Amir; Droste, Ronald L

2004-07-05

While more attention has been paid in recent years to urban point source pollution control through the establishment of wastewater treatment plants in many developing countries, no considerable planning nor any serious measures have been taken to control urban non-point source pollution (urban stormwater runoff). The present study is a screening analysis to investigate the pollution loads in urban runoff compared to point source loads as a first prerequisite for planning and management of receiving water quality. To compare pollutant loads from point and non-point urban sources, the pollutant load is expressed as the weight of pollutant per hectare area per year (kg/ha.year). Unit loads were estimated in stormwater runoff, raw sanitary wastewater and secondary treatment effluents in Isfahan, Iran. Results indicate that the annual pollution load in urban runoff is lower than the annual pollution load in sanitary wastewater in areas with low precipitation but it is higher in areas with high precipitation. Two options, namely, advanced treatment (in lieu of secondary treatment) of sanitary wastewater and urban runoff quality control systems (such as detention ponds) were investigated as controlling systems for pollution discharges into receiving waters. The results revealed that for Isfahan, as a low precipitation urban area, advanced treatment is a more suitable option, but for high precipitation urban areas, urban surface runoff quality control installations were more effective for suspended solids and oxygen-demanding matter controls, and that advanced treatment is the more effective option for nutrient control.

Understanding DOC Mobilization Dynamics Through High Frequency Measurements in a Headwater Catchment

NASA Astrophysics Data System (ADS)

Werner, B.; Musolff, A.; Lechtenfeld, O.; de Rooij, G. H.; Fleckenstein, J. H.

2017-12-01

Increasing dissolved organic carbon (DOC) exports from headwater catchments impact the quality of downstream waters and pose challenges to water supply. The importance of riparian zones for DOC export from catchments in humid, temperate climates has generally been acknowledged, but the hydrological controls and biogeochemical factors that govern mobilization of DOC from riparian zones remain elusive. By analyzing high-frequency time series of UV-VIS based water quality we therefore aim at a better understanding on temporal dynamics of DOC mobilization and exports. In a first step a one year high frequency (15 minutes) data set from a headwater catchment in the Harz Mountains (Germany) was systematically analyzed for event-based patterns in DOC concentrations. Here, a simplistic linear model was generated to explain DOC concentration level and variability in the stream. Furthermore, spectral (e.g. slopes and SUVA254) and molecular (FT-ICR-MS) characterization of DOC was used to fingerprint in-stream DOC during events. Continuous DOC concentrations were best predicted (R², NSE = 0.53) by instantaneous discharge (Q) and antecede wetness conditions of the last 30 days (AWC30 = Precip.30/PET30) as well as mean air temperature (Tmean30) and mean discharge (Qmean30) of the preceding 30 days. Analyses of 36 events revealed seasonal trends for the slope, intercept and R² of linear log(DOC)-log(Q) regressions that can be best explained by the mean air temperature of the preceding 15 days. Continuously available optical DOC quality parameters SUVA254 and spectral slope (275 nm - 295 nm) systematically changed with shifts in discharge and in DOC concentration. This is underlined by selected FT-ICR-MS measurements indicating higher DOC aromaticity and oxygen content at high flow conditions. The change of DOC quality parameters during events indicate a shift in the activated source zones: DOC with a different quality was mobilized during high flow conditions when higher groundwater levels connected formerly disconnected DOC source zones to the stream. We conclude that the high concentration variability of DOC can be explained by a few controlling variables only. These variables can be linked to event-based DOC source activation and more seasonal controls of DOC production.

Automated quality control in a file-based broadcasting workflow

NASA Astrophysics Data System (ADS)

Zhang, Lina

2014-04-01

Benefit from the development of information and internet technologies, television broadcasting is transforming from inefficient tape-based production and distribution to integrated file-based workflows. However, no matter how many changes have took place, successful broadcasting still depends on the ability to deliver a consistent high quality signal to the audiences. After the transition from tape to file, traditional methods of manual quality control (QC) become inadequate, subjective, and inefficient. Based on China Central Television's full file-based workflow in the new site, this paper introduces an automated quality control test system for accurate detection of hidden troubles in media contents. It discusses the system framework and workflow control when the automated QC is added. It puts forward a QC criterion and brings forth a QC software followed this criterion. It also does some experiments on QC speed by adopting parallel processing and distributed computing. The performance of the test system shows that the adoption of automated QC can make the production effective and efficient, and help the station to achieve a competitive advantage in the media market.

A Configurational Approach to the Relationship between High-Performance Work Practices and Frontline Health Care Worker Outcomes

PubMed Central

Chuang, Emmeline; Dill, Janette; Morgan, Jennifer Craft; Konrad, Thomas R

2012-01-01

Objective To identify high-performance work practices (HPWP) associated with high frontline health care worker (FLW) job satisfaction and perceived quality of care. Methods Cross-sectional survey data from 661 FLWs in 13 large health care employers were collected between 2007 and 2008 and analyzed using both regression and fuzzy-set qualitative comparative analysis. Principal Findings Supervisor support and team-based work practices were identified as necessary for high job satisfaction and high quality of care but not sufficient to achieve these outcomes unless implemented in tandem with other HPWP. Several configurations of HPWP were associated with either high job satisfaction or high quality of care. However, only one configuration of HPWP was sufficient for both: the combination of supervisor support, performance-based incentives, team-based work, and flexible work. These findings were consistent even after controlling for FLW demographics and employer type. Additional research is needed to clarify whether HPWP have differential effects on quality of care in direct care versus administrative workers. Conclusions High-performance work practices that integrate FLWs in health care teams and provide FLWs with opportunities for participative decision making can positively influence job satisfaction and perceived quality of care, but only when implemented as bundles of complementary policies and practices. PMID:22224858

[Indications for the use of continuous subcutaneous insulin infusion in pediatric patients with type 1 diabetes mellitus].

PubMed

Espejel-Huerta, Diana; Antillón-Ferreira, Carlos Alberto; Iglesias-Leboreiro, José; Bernárdez-Zapata, Isabel; Martínez-Ramos Méndez, Angélica; Rendón-Macías, Mario Enrique

2016-01-01

Diabetes is a serious health problem for pediatrics. In pediatric patients control depends on correct insulin administration. The most usual is subcutaneous administration according to the glycemic control. The aim was to analyze the indications for continuous subcutaneous insulin infusion (CSII) in type 1 diabetes mellitus (T1DM) children and adolescents. It was carried out a descriptive study in patients from 1 to 16 years with T1DM who underwent CSII therapy. The main cause to use this therapy was analyzed, and also if that cause was different regarding age, sex and disease progression. 61 patients underwent CSII therapy. The median age at the beginning of treatment was 9 years old; 43 patients (71.6 %) had more than one year of diagnosis. The main reasons to use CSII were: 42.6 % had to improve their quality of life, 34.4 % had to reduce the high glycemic variability, 13.1 % had to control severe recurrent hypoglycemia, and 9.8 % had to control their HbA1c. For children under 6 years of age (n = 14) the more frequent indication were recurrent hypoglycemia and to improve their quality of life; children from 6 to 12 years of age (n = 27) had to improve their quality of life, and in children over 12 years CSII was indicated for high glycemic variability and severe recurrent hypoglycemia. There was no different indication related between sexes. Improve their quality of life and reach a better glycemic control were the main reasons to start CSII in our patients.

[Application of quality by design in granulation process for Ginkgo leaf tablet (Ⅲ)： process control strategy based on design space].

PubMed

Cui, Xiang-Long; Xu, Bing; Sun, Fei; Dai, Sheng-Yun; Shi, Xin-Yuan; Qiao, Yan-Jiang

2017-03-01

In this paper, under the guidance of quality by design (QbD) concept, the control strategy of the high shear wet granulation process of the ginkgo leaf tablet based on the design space was established to improve the process controllability and product quality consistency. The median granule size (D50) and bulk density (Da) of granules were identified as critical quality attributes (CQAs) and potential critical process parameters (pCPPs) were determined by the failure modes and effect analysis (FMEA). The Plackeet-Burmann experimental design was used to screen pCPPs and the results demonstrated that the binder amount, the wet massing time and the wet mixing impeller speed were critical process parameters (CPPs). The design space of the high shear wet granulation process was developed within pCPPs range based on the Box-Behnken design and quadratic polynomial regression models. ANOVA analysis showed that the P-values of model were less than 0.05 and the values of lack of fit test were more than 0.1, indicating that the relationship between CQAs and CPPs could be well described by the mathematical models. D₅₀ could be controlled within 170 to 500 μm, and the bulk density could be controlled within 0.30 to 0.44 g•cm⁻³ by using any CPPs combination within the scope of design space. Besides, granules produced by process parameters within the design space region could also meet the requirement of tensile strength of the ginkgo leaf tablet.. Copyright© by the Chinese Pharmaceutical Association.

Cryopreservation in fish: current status and pathways to quality assurance and quality control in repository development

PubMed Central

Torres, Leticia; Hu, E.; Tiersch, Terrence R.

2017-01-01

Cryopreservation in aquatic species in general has been constrained to research activities for more than 60 years. Although the need for application and commercialisation pathways has become clear, the lack of comprehensive quality assurance and quality control programs has impeded the progress of the field, delaying the establishment of germplasm repositories and commercial-scale applications. In this review we focus on the opportunities for standardisation in the practices involved in the four main stages of the cryopreservation process: (1) source, housing and conditioning of fish; (2) sample collection and preparation; (3) freezing and cryogenic storage of samples; and (4) egg collection and use of thawed sperm samples. In addition, we introduce some key factors that would assist the transition to commercial-scale, high-throughput application. PMID:26739583

Physician-delivered injection therapies for mechanical neck disorders: a systematic review update (non-oral, non-intravenous pharmacological interventions for neck pain).

PubMed

Gross, Anita R; Peloso, Paul M; Galway, Erin; Navasero, Neenah; Essen, Karis Van; Graham, Nadine; Goldsmith, Charlie H; Gzeer, Wisam; Shi, Qiyun; Haines, Ted And Cog

2013-01-01

Controversy persists regarding medicinal injections for mechanical neck disorders (MNDs). To determine the effectiveness of physician-delivered injections on pain, function/disability, quality of life, global perceived effect and patient satisfaction for adults with MNDs. We updated our previous searches of CENTRAL, MEDLINE and EMBASE from December 2006 through to March 2012. We included randomized controlled trials of adults with neck disorders treated by physician-delivered injection therapies. Two authors independently selected articles, abstracted data and assessed methodological quality. When clinical heterogeneity was absent, we combined studies using random-effects models. We included 12 trials (667 participants). No high or moderate quality studies were found with evidence of benefit over control. Moderate quality evidence suggests little or no difference in pain or function/disability between nerve block injection of steroid and bupivacaine vs bupivacaine alone at short, intermediate and long-term for chronic neck pain. We found limited very low quality evidence of an effect on pain with intramuscular lidocaine vs control for chronic myofascial neck pain. Two low quality studies showed an effect on pain with anaesthetic nerve block vs saline immediately post treatment and in the short-term. All other studies were of low or very low quality with no evidence of benefit over controls. Current evidence does not confirm the effectiveness of IM-lidocaine injection for chronic mechanical neck pain nor anaesthetic nerve block for cervicogenic headache. There is moderate evidence of no benefit for steroid blocks vs controls for mechanical neck pain.

A Narrative Review of High-Quality Literature on the Effects of Resident Duty Hours Reforms.

PubMed

Lin, Henry; Lin, Emery; Auditore, Stephanie; Fanning, Jon

2016-01-01

To summarize current high-quality studies evaluating the effect and efficacy of resident duty hours reforms (DHRs) on patient safety and resident education and well-being. The authors searched PubMed and Medline in August 2012 and again in May 2013 for literature (1987-2013) about the effects of DHRs. They assessed the quality of articles using the Medical Education Research Study Quality Instrument (MERSQI) scoring system. They considered randomized controlled trials (RCTs), partial RCTs, and all studies with a MERSQI score ≥ 14 to be "high-quality" methodology studies. A total of 72 high-quality studies met inclusion criteria. Most studies showed no change or slight improvement in mortality and complication rates after DHRs. Resident well-being was generally improved, but there was a perceived negative impact on education (knowledge acquisition, skills, and cognitive performance) following DHRs. Eleven high-quality studies assessed the impact of DHR interventions; all reported a neutral to positive impact. Seven high-quality studies assessed costs associated with DHRs and demonstrated an increase in hospital costs. The results of most studies that allow enough time for DHR interventions to take effect suggest a benefit to patient safety and resident well-being, but the effect on the quality of training remains unknown. Additional methodologically sound studies on the impact of DHRs are necessary. Priorities for future research include approaches to optimizing education and clinical proficiency and studies on the effect of intervention strategies on both education and patient safety. Such studies will provide additional information to help improve duty hours policies.

Lower gastrointestinal symptoms are associated with worse glycemic control and quality of life in type 1 diabetes mellitus.

PubMed

Leeds, John S; Hadjivassiliou, Marios; Tesfaye, Solomon; Sanders, David S

2018-01-01

Lower gastrointestinal symptoms are not well characterized in people with type 1 diabetes, and the effects on quality of life and glycemic control are unknown. This study aimed to determine the prevalence of lower gastrointestinal symptoms and the effects on glycemic control and quality of life, and to investigate for underlying causes. This is a prospective, cohort study in secondary care. Patients with type 1 diabetes completed a gastrointestinal symptom questionnaire and the Short Form 36 V.2 quality of life questionnaire and had their hemoglobin A1c measured. Patients with diarrhea were offered reassessment and investigation as per the national guidelines. Controls without diabetes were used to compare symptom prevalence and quality of life scores. 706 with type 1 diabetes (mean age 41.9 years) and 604 controls (mean age 41.9 years) were enrolled. Gastrointestinal symptoms were significantly more frequent in type 1 diabetes compared with controls, in particular constipation (OR 2.4), diarrhea (OR 2.5), alternating bowel habit (OR 2.1), abdominal pain (OR 1.4), floating stools (OR 2.7), bloating (OR 1.4) and flatulence (OR 1.3) (all p<0.05). Previous pancreatitis was more frequent in type 1 diabetes (OR 4.6), but other gastrointestinal conditions were not. Gastrointestinal symptoms were associated with poorer glycemic control (p<0.01) and worse quality of life particularly in those with diarrhea. Investigation of those with diarrhea, including those with alternating bowel habit, (n=105), identified a cause in 72.3% with subsequent change in management. Gastrointestinal symptoms are twice as common in type 1 diabetes and associated with poorer quality of life and glycemic control. Investigation of diarrhea in people with type 1 diabetes leads to a high yield of treatable conditions and a change in management in about three-quarters.

Handling qualities of a wide-body transport airplane utilizing Pitch Active Control Systems (PACS) for relaxed static stability application

NASA Technical Reports Server (NTRS)

Grantham, William D.; Person, Lee H., Jr.; Brown, Philip W.; Becker, Lawrence E.; Hunt, George E.; Rising, J. J.; Davis, W. J.; Willey, C. S.; Weaver, W. A.; Cokeley, R.

1985-01-01

Piloted simulation studies have been conducted to evaluate the effectiveness of two pitch active control systems (PACS) on the flying qualities of a wide-body transport airplane when operating at negative static margins. These two pitch active control systems consisted of a simple 'near-term' PACS and a more complex 'advanced' PACS. Eight different flight conditions, representing the entire flight envelope, were evaluated with emphasis on the cruise flight conditions. These studies were made utilizing the Langley Visual/Motion Simulator (VMS) which has six degrees of freedom. The simulation tests indicated that (1) the flying qualities of the baseline aircraft (PACS off) for the cruise and other high-speed flight conditions were unacceptable at center-of-gravity positions aft of the neutral static stability point; (2) within the linear static stability flight envelope, the near-term PACS provided acceptable flying qualities for static stabilty margins to -3 percent; and (3) with the advanced PACS operative, the flying qualities were demonstrated to be good (satisfactory to very acceptable) for static stabilty margins to -20 percent.

A proteomics performance standard to support measurement quality in proteomics.

PubMed

Beasley-Green, Ashley; Bunk, David; Rudnick, Paul; Kilpatrick, Lisa; Phinney, Karen

2012-04-01

The emergence of MS-based proteomic platforms as a prominent technology utilized in biochemical and biomedical research has increased the need for high-quality MS measurements. To address this need, National Institute of Standards and Technology (NIST) reference material (RM) 8323 yeast protein extract is introduced as a proteomics quality control material for benchmarking the preanalytical and analytical performance of proteomics-based experimental workflows. RM 8323 yeast protein extract is based upon the well-characterized eukaryote Saccharomyces cerevisiae and can be utilized in the design and optimization of proteomics-based methodologies from sample preparation to data analysis. To demonstrate its utility as a proteomics quality control material, we coupled LC-MS/MS measurements of RM 8323 with the NIST MS Quality Control (MSQC) performance metrics to quantitatively assess the LC-MS/MS instrumentation parameters that influence measurement accuracy, repeatability, and reproducibility. Due to the complexity of the yeast proteome, we also demonstrate how NIST RM 8323, along with the NIST MSQC performance metrics, can be used in the evaluation and optimization of proteomics-based sample preparation methods. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Dietary quality and encephalization in platyrrhine primates.

PubMed

Allen, Kari L; Kay, Richard F

2012-02-22

The high energetic costs of building and maintaining large brains are thought to constrain encephalization. The 'expensive-tissue hypothesis' (ETH) proposes that primates (especially humans) overcame this constraint through reduction of another metabolically expensive tissue, the gastrointestinal tract. Small guts characterize animals specializing on easily digestible diets. Thus, the hypothesis may be tested via the relationship between brain size and diet quality. Platyrrhine primates present an interesting test case, as they are more variably encephalized than other extant primate clades (excluding Hominoidea). We find a high degree of phylogenetic signal in the data for diet quality, endocranial volume and body size. Controlling for phylogenetic effects, we find no significant correlation between relative diet quality and relative endocranial volume. Thus, diet quality fails to account for differences in platyrrhine encephalization. One taxon, in particular, Brachyteles, violates predictions made by ETH in having a large brain and low-quality diet. Dietary reconstructions of stem platyrrhines further indicate that a relatively high-quality diet was probably in place prior to increases in encephalization. Therefore, it is unlikely that a shift in diet quality was a primary constraint release for encephalization in platyrrhines and, by extrapolation, humans.

[Accesibility and use of spirometry in primary care centers in Catalonia].

PubMed

Llauger, M Antònia; Rosas, Alba; Burgos, Felip; Torrente, Elena; Tresserras, Ricard; Escarrabill, Joan

2014-01-01

Examine the accessibility and use of forced spirometry (FS) in public primary care facilities centers in Catalonia. Cross-sectional study using a survey. Three hundred sixty-six Primary Care Teams (PCT) in Catalonia. Third quarter of 2010. Survey with information on spirometers, training, interpretation and quality control, and the priority that the quality of spirometry had for the team. Indicators FS/100 inhabitants/year, FS/month/PCT; FS/month/10,000 inhabitants. Response rate: 75%. 97.5% of PCT had spirometer and made an average of 2.01 spirometries/100 inhabitants (34.68 spirometry/PCT/month). 83% have trained professionals.>50% centers perform formal training but no information is available on the quality. 70% performed some sort of calibration. Interpretation was made by the family physician in 87.3% of cases. In 68% of cases not performed any quality control of exploration. 2/3 typed data manually into the computerized medical record.>50% recognized a high priority strategies for improving the quality. Despite the accessibility of EF efforts should be made to standardize training, increasing the number of scans test and promote systematic quality control. Copyright © 2013 Elsevier España, S.L. All rights reserved.

Continuous on-line steam quality monitoring system of the Bacman Geothermal Production Field, Philippines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solis, R.P.; Chavez, F.C.; Garcia, S.E.

1997-12-31

In any operating geothermal power plant, steam quality is one of the most important parameters being monitored. In the Bacon-Manito Geothermal Production Field (BGPF), an online steam quality monitoring system have been installed in two operating power plants which provides an accurate, efficient and continuous real-time data which is more responsive to the various requirements of the field operation. The system utilizes sodium as an indicator of steam purity. Sodium concentration is read by the flame photometer located at the interface after aspirating a sample of the condensed steam through a continuous condensate sampler. The condensate has been degassed throughmore » a condensate-NCG separator. The flame photometer analog signal is then converted by a voltage-to-current converter/transmitter and relayed to the processor which is located at the control center through electrical cable to give a digital sodium concentration read-out at the control panel. The system features a high and high-high sodium level alarm, a continuous strip-chart recorder and a central computer for data capture, retrieval, and processing for further interpretation. Safety devices, such as the flame-off indicator at the control center and the automatic fuel cut-off device along the fuel line, are incorporated in the system.« less

Improving and monitoring air quality.

PubMed

DuPont, André

2018-05-01

Since the authorization of the Clean Air Act Amendments of 1990, the air quality in the USA has significantly improved because of strong public support. The lessons learned over the last 25 years are being shared with the policy analysts, technical professionals, and scientist who endeavor to improve air quality in their communities. This paper will review how the USA has achieved the "high" standard of air quality that was envisioned in the early 1990s. This document will describe SO 2 gas emission reduction technology and highlight operation of emission monitoring technology. This paper describes the basic process operation of an air pollution control scrubber. A technical review of measures required to operate and maintain a large-scale pollution control system will be described. Also, the author explains how quality assurance procedures in performance of continuous emission monitoring plays a significant role in reducing air pollution.

Markov Chains For Testing Redundant Software

NASA Technical Reports Server (NTRS)

White, Allan L.; Sjogren, Jon A.

1990-01-01

Preliminary design developed for validation experiment that addresses problems unique to assuring extremely high quality of multiple-version programs in process-control software. Approach takes into account inertia of controlled system in sense it takes more than one failure of control program to cause controlled system to fail. Verification procedure consists of two steps: experimentation (numerical simulation) and computation, with Markov model for each step.

Association of journal quality indicators with methodological quality of clinical research articles.

PubMed

Lee, Kirby P; Schotland, Marieka; Bacchetti, Peter; Bero, Lisa A

2002-06-05

The ability to identify scientific journals that publish high-quality research would help clinicians, scientists, and health-policy analysts to select the most up-to-date medical literature to review. To assess whether journal characteristics of (1) peer-review status, (2) citation rate, (3) impact factor, (4) circulation, (5) manuscript acceptance rate, (6) MEDLINE indexing, and (7) Brandon/Hill Library List indexing are predictors of methodological quality of research articles, we conducted a cross-sectional study of 243 original research articles involving human subjects published in general internal medical journals. The mean (SD) quality score of the 243 articles was 1.37 (0.22). All journals reported a peer-review process and were indexed on MEDLINE. In models that controlled for article type (randomized controlled trial [RCT] or non-RCT), journal citation rate was the most statistically significant predictor (0.051 increase per doubling; 95% confidence interval [CI], 0.037-0.065; P<.001). In separate analyses by article type, acceptance rate was the strongest predictor for RCT quality (-0.113 per doubling; 95% CI, -0.148 to -0.078; P<.001), while journal citation rate was the most predictive factor for non-RCT quality (0.051 per doubling; 95% CI, 0.044-0.059; P<.001). High citation rates, impact factors, and circulation rates, and low manuscript acceptance rates and indexing on Brandon/Hill Library List appear to be predictive of higher methodological quality scores for journal articles.

The effect of chlorine dioxide and chitosan/essential oil coatings on the safety and quality of fresh blueberries

USDA-ARS?s Scientific Manuscript database

Blueberries are high-value fruit with strong antioxidant capacity and other health-promoting benefits. Controlled release chlorine dioxide (ClO2) or chitosan coating plus different essential oils were applied to fresh blueberries to preserve their quality and safety during postharvest storage. In vi...

A six sigma review of miniature optics alignment

NASA Astrophysics Data System (ADS)

Tesar, John

2009-08-01

The key to high quality optics is a set of guidelines. Create an understanding of the Criteria for Quality. Focus on understanding and controlling process variation. Examine verification and validation of methods. Take a view of the horizon as well as drilling down so you know when to put down the shovel.

Software Quality Control at Belle II

NASA Astrophysics Data System (ADS)

Ritter, M.; Kuhr, T.; Hauth, T.; Gebard, T.; Kristof, M.; Pulvermacher, C.; Belle Software Group, II

2017-10-01

Over the last seven years the software stack of the next generation B factory experiment Belle II has grown to over one million lines of C++ and Python code, counting only the part included in offline software releases. There are several thousand commits to the central repository by about 100 individual developers per year. To keep a coherent software stack of high quality that it can be sustained and used efficiently for data acquisition, simulation, reconstruction, and analysis over the lifetime of the Belle II experiment is a challenge. A set of tools is employed to monitor the quality of the software and provide fast feedback to the developers. They are integrated in a machinery that is controlled by a buildbot master and automates the quality checks. The tools include different compilers, cppcheck, the clang static analyzer, valgrind memcheck, doxygen, a geometry overlap checker, a check for missing or extra library links, unit tests, steering file level tests, a sophisticated high-level validation suite, and an issue tracker. The technological development infrastructure is complemented by organizational means to coordinate the development.

High-throughput assay for optimising microbial biological control agent production and delivery

USDA-ARS?s Scientific Manuscript database

Lack of technologies to produce and deliver effective biological control agents (BCAs) is a major barrier to their commercialization. A myriad of variables associated with BCA cultivation, formulation, drying, storage, and reconstitution processes complicates agent quality maximization. An efficie...

Land cover controls on summer discharge and runoff solution chemistry of semi-arid urban catchments

NASA Astrophysics Data System (ADS)

Gallo, Erika L.; Brooks, Paul D.; Lohse, Kathleen A.; McLain, Jean E. T.

2013-04-01

SummaryRecharge of urban runoff to groundwater as a stormwater management practice has gained importance in semi-arid regions where water resources are scarce and urban centers are growing. Despite this trend, the importance of land cover in controlling semi-arid catchment runoff quantity and quality remains unclear. Here we address the question: How do land cover characteristics control the amount and quality of storm runoff in semi-arid urban catchments? We monitored summertime runoff quantity and quality from five catchments dominated by distinct urban land uses: low, medium, and high density residential, mixed use, and commercial. Increasing urban land cover increased runoff duration and the likelihood that a rainfall event would result in runoff, but did not increase the time to peak discharge of episodic runoff. The effect of urban land cover on hydrologic responses was tightly coupled to the magnitude of rainfall. At distinct rainfall thresholds, roads, percent impervious cover and the stormwater drainage network controlled runoff frequency, runoff depth and runoff ratios. Contrary to initial expectations, runoff quality did not vary in repose to impervious cover or land use. We identified four major mechanisms controlling runoff quality: (1) variable solute sourcing due to land use heterogeneity and above ground catchment connectivity; (2) the spatial extent of pervious and biogeochemically active areas; (3) the efficiency of overland flow and runoff mobilization; and (4) solute flushing and dilution. Our study highlights the importance of the stormwater drainage systems characteristics in controlling urban runoff quantity and quality; and suggests that enhanced wetting and in-stream processes may control solute sourcing and retention. Finally, we suggest that the characteristics of the stormwater drainage system should be integrated into stormwater management approaches.

Cost effectiveness of novel oral anticoagulants for stroke prevention in atrial fibrillation depending on the quality of warfarin anticoagulation control.

PubMed

Janzic, Andrej; Kos, Mitja

2015-04-01

Vitamin K antagonists, such as warfarin, are standard treatments for stroke prophylaxis in patients with atrial fibrillation. Patient outcomes depend on quality of warfarin management, which includes regular monitoring and dose adjustments. Recently, novel oral anticoagulants (NOACs) that do not require regular monitoring offer an alternative to warfarin. The aim of this study was to evaluate whether cost effectiveness of NOACs for stroke prevention in atrial fibrillation depends on the quality of warfarin control. We developed a Markov decision model to simulate warfarin treatment outcomes in relation to the quality of anticoagulation control, expressed as percentage of time in the therapeutic range (TTR). Standard treatment with adjusted-dose warfarin and improved anticoagulation control by genotype-guided dosing were compared with dabigatran, rivaroxaban, apixaban and edoxaban. The analysis was performed from the Slovenian healthcare payer perspective using 2014 costs. In the base case, the incremental cost-effectiveness ratio for apixaban, dabigatran and edoxaban was below the threshold of €25,000 per quality-adjusted life-years compared with adjusted-dose warfarin with a TTR of 60%. The probability that warfarin was a cost-effective option was around 1%. This percentage rises as the quality of anticoagulation control improves. At a TTR of 70%, warfarin was the preferred treatment in half the iterations. The cost effectiveness of NOACs for stroke prevention in patients with nonvalvular atrial fibrillation who are at increased risk for stroke is highly sensitive to warfarin anticoagulation control. NOACs are more likely to be cost-effective options in settings with poor warfarin management than in settings with better anticoagulation control, where they may not represent good value for money.

HDP for the Neutralized pH Value Control in the Clarifying Process of Sugar Cane Juice

NASA Astrophysics Data System (ADS)

Lin, Xiaofeng; Yang, Jiaran

2009-05-01

Neutralizing pH value of sugar cane juice is the important craft in the control process in the clarifying process of sugar cane juice, which is the important factor to influence output and the quality of white sugar. On the one hand, it is an important content to control the neutralized pH value within a required range, which has the vital significance for acquiring high quality purified juice, reducing energy consumption and raising sucrose recovery. On the other hand, it is a complicated physical-chemistry process, which has the characteristics of strong non-linearity, time-varying, large time-delay, and multi-input. Therefore, there has not been a very good solution to control the neutralized pH value. Firstly, in this chapter, a neural network model for the clarifying process of sugar juice is established based on gathering 1200 groups of real-time sample data in a sugar factory. Then, the HDP (Heuristic Dynamic Programming) method is used to optimize and control the neutralized pH value in the clarifying process of sugar juice. Simulation results indicate that this method has good control effect. This will build a good foundation for stabilizing the clarifying process and enhancing the quality of the purified juice and lastly enhancing the quality of white sugar.

Automating PACS quality control with the Vanderbilt image processing enterprise resource

NASA Astrophysics Data System (ADS)

Esparza, Michael L.; Welch, E. Brian; Landman, Bennett A.

2012-02-01

Precise image acquisition is an integral part of modern patient care and medical imaging research. Periodic quality control using standardized protocols and phantoms ensures that scanners are operating according to specifications, yet such procedures do not ensure that individual datasets are free from corruption; for example due to patient motion, transient interference, or physiological variability. If unacceptable artifacts are noticed during scanning, a technologist can repeat a procedure. Yet, substantial delays may be incurred if a problematic scan is not noticed until a radiologist reads the scans or an automated algorithm fails. Given scores of slices in typical three-dimensional scans and widevariety of potential use cases, a technologist cannot practically be expected inspect all images. In large-scale research, automated pipeline systems have had great success in achieving high throughput. However, clinical and institutional workflows are largely based on DICOM and PACS technologies; these systems are not readily compatible with research systems due to security and privacy restrictions. Hence, quantitative quality control has been relegated to individual investigators and too often neglected. Herein, we propose a scalable system, the Vanderbilt Image Processing Enterprise Resource (VIPER) to integrate modular quality control and image analysis routines with a standard PACS configuration. This server unifies image processing routines across an institutional level and provides a simple interface so that investigators can collaborate to deploy new analysis technologies. VIPER integrates with high performance computing environments has successfully analyzed all standard scans from our institutional research center over the course of the last 18 months.

Daidzein enhances intramuscular fat deposition and improves meat quality in finishing steers

PubMed Central

Zhao, Xiang-Hui; Yang, Zhu-Qing; Bao, Lin-Bin; Wang, Can-Yu; -Zhou, Shan; Gong, Jian-Ming; Fu, Chuan-Bian; Xu, Lan-Jiao; Liu, Chan-Juan

2015-01-01

An experiment was conducted to determine the effects of soy isoflavone daidzein on carcass characteristics, fat deposition, meat quality, and blood metabolites in finishing steers. Fourteen crossbred steers were used in a 120-d finishing study. These steers were stratified by weight into groups and randomly allotted by group to one of two dietary treatments: (1) control and (2) daidzein (500 mg/kg concentrate). The steers were fed a 90% concentrate diet. Supplemental daidzein did not affect slaughter weight, hot carcass weight, and dressing percentage, but tended to reduce fat proportion (not including intramuscular fat) in carcass and backfat thickness of steers. The carcass bone proportion was greater in steers fed daidzein diets than those fed control diets. Daidzein supplementation reduced pH at 24 h after slaughtered and moisture content and increased isocitrate dehydrogenase activity, fat content (16.28% and 7.94%), marbling score (5.29 and 3.36), redness (a*), and chroma (C*) values in longissimus muscle relative to control treatment. The concentrations of blood metabolites including glucose, blood urea nitrogen, triglyceride, total cholesterol, non-esterified fatty acid, high-density lipoprotein cholesterol (HDL-C), and low-density lipoprotein cholesterol (LDL-C) were all lower in steers fed daidzein diets than those fed control diets. Current results suggest that supplemental daidzein can affect lipid metabolism, increase intramuscular fat content and marbling score, and improve meat quality in finishing steers. Daidzein should be a promising feed additive for production of high-quality beef meat. PMID:25526906

Method of fabricating optical waveguides by ion implantation doping

DOEpatents

Appleton, B.R.; Ashley, P.R.; Buchal, C.J.

1987-03-24

A method for fabricating high-quality optical waveguides in optical quality oxide crystals by ion implantation doping and controlled epitaxial recrystallization is provided. Masked LiNbO/sub 3/ crystals are implanted with high concentrations of Ti dopant at ion energies of about 360 keV while maintaining the crystal near liquid nitrogen temperature. Ion implantation doping produces an amorphous, Ti-rich nonequilibrium phase in the implanted region. Subsequent thermal annealing in a water-saturated oxygen atmosphere at up to 1000/degree/C produces solid-phase epitaxial regrowth onto the crystalline substrate. A high-quality crystalline layer results which incorporates the Ti into the crystal structure at much higher concentrations than is possible by standard diffusion techniques, and this implanted region has excellent optical waveguiding properties.

Psychological predictors for health-related quality of life and disability in persons with chronic obstructive pulmonary disease (COPD).

PubMed

Mewes, Ricarda; Rief, Winfried; Kenn, Klaus; Ried, Jens; Stenzel, Nikola

2016-01-01

Individuals with chronic obstructive pulmonary disease (COPD) exhibit low physical and mental health-related quality of life (HRQL) and high susceptibility to disability. We investigated the influence of psychological factors on HRQL and disability in COPD individuals recruited from the general population. In line with Leventhal's common sense model, we expected psychological factors to be associated with HRQL and disability even after controlling for medical status. Individuals with COPD (n = 502; 59.7 years old; GOLD grades were I: 3%, II: 17%, III: 34%, IV: 46%) were assessed through an online survey administered via COPD patient organisations in Germany. Individuals filled in the Short Form Health Survey (SF-12), COPD Assessment Test, Patient Health Questionnaire (modules: GAD-2, PHQ-15, PHQ-9), Brief Illness Perception Questionnaire, a questionnaire that assesses causal illness attributions, and the internal illness-related locus of control scale of the 'KKG questionnaire for the assessment of control beliefs about illness and health'. Multiple linear regressions were calculated. The investigated factors explained high variances (disability = 56%, physical HRQL = 28%, mental HRQL = 63%, p ≤ .001). Better mental health, more optimistic illness perceptions, attribution to psychological causes, and stronger internal locus of control were associated with lower disability and better HRQL. Comorbid somatic symptoms contributed to high disability and low quality of life. Psychological factors, such as illness perception, attribution and internal locus of control, were associated with disability and HRQL. These factors should be considered when designing treatments for individuals with COPD, and adequate interventions should be provided to enhance illness understanding and self-management skills.

High Spicy Food Intake and Risk of Cancer: A Meta-analysis of Case-control Studies.

PubMed

Chen, Yu-Heng; Zou, Xiao-Nong; Zheng, Tong-Zhang; Zhou, Qi; Qiu, Hui; Chen, Yuan-Li; He, Mei; Du, Jia; Lei, Hai-Ke; Zhao, Ping

2017-09-20

Studies on the association between spicy food intake and cancer risk have reported inconsistent results. We quantitatively assessed this association by conducting a meta-analysis based on evidence from case-control studies. PubMed, EMBASE, and the Cochrane Library were searched for eligible publications. Combined odds ratios (OR s) with their 95% confidence interval (CI) were calculated using a random- or fixed-effects model. The methodological quality of the included articles was assessed using the Newcastle-Ottawa scale (NOS). All data were analyzed using STATA 11.0 software (version 11.0; StataCorp., College Station, TX, USA). Subgroup analyses were also performed with stratification by region, sex, number of cases, cancer subtype, source of the control group, and NOS score. A total 39 studies from 28 articles fulfilled the inclusion criteria for the meta-analysis (7884 patients with cancer and 10,142 controls). Comparison of the highest versus lowest exposure category in each study revealed a significant OR of 1.76 (95% CI = 1.35-2.29) in spite of significant heterogeneity (P < 0.001). In the subgroup analyses, this positive correlation was still found for gastric cancer, different regions, different numbers of cases, different sources of the control group, and high-quality articles (NOS score of ≥ 7). However, no statistically significant association was observed for women, esophageal cancer, gallbladder cancer, or low-quality articles (NOS score of <7). No evidence of publication bias was found. Evidence from case-control studies suggested that a higher level of spicy food intake may be associated with an increased incidence of cancer despite significant heterogeneity. More studies are warranted to clarify our understanding of the association between high spicy food intake and the risk of cancer.

The NCC project: A quality management perspective

NASA Technical Reports Server (NTRS)

Lee, Raymond H.

1993-01-01

The Network Control Center (NCC) Project introduced the concept of total quality management (TQM) in mid-1990. The CSC project team established a program which focused on continuous process improvement in software development methodology and consistent deliveries of high quality software products for the NCC. The vision of the TQM program was to produce error free software. Specific goals were established to allow continuing assessment of the progress toward meeting the overall quality objectives. The total quality environment, now a part of the NCC Project culture, has become the foundation for continuous process improvement and has resulted in the consistent delivery of quality software products over the last three years.

Robust, nonlinear, high angle-of-attack control design for a supermaneuverable vehicle

NASA Technical Reports Server (NTRS)

Adams, Richard J.

1993-01-01

High angle-of-attack flight control laws are developed for a supermaneuverable fighter aircraft. The methods of dynamic inversion and structured singular value synthesis are combined into an approach which addresses both the nonlinearity and robustness problems of flight at extreme operating conditions. The primary purpose of the dynamic inversion control elements is to linearize the vehicle response across the flight envelope. Structured singular value synthesis is used to design a dynamic controller which provides robust tracking to pilot commands. The resulting control system achieves desired flying qualities and guarantees a large margin of robustness to uncertainties for high angle-of-attack flight conditions. The results of linear simulation and structured singular value stability analysis are presented to demonstrate satisfaction of the design criteria. High fidelity nonlinear simulation results show that the combined dynamics inversion/structured singular value synthesis control law achieves a high level of performance in a realistic environment.

Isolation of high quality RNA from pistachio (Pistacia vera L.) and other woody plants high in secondary metabolites.

PubMed

Moazzam Jazi, Maryam; Rajaei, Saideh; Seyedi, Seyed Mahdi

2015-10-01

The quality and quantity of RNA are critical for successful downstream transcriptome-based studies such as microarrays and RNA sequencing (RNA-Seq). RNA isolation from woody plants, such as Pistacia vera, with very high amounts of polyphenols and polysaccharides is an enormous challenge. Here, we describe a highly efficient protocol that overcomes the limitations posed by poor quality and low yield of isolated RNA from pistachio and various recalcitrant woody plants. The key factors that resulted in a yield of 150 μg of high quality RNA per 200 mg of plant tissue include the elimination of phenol from the extraction buffer, raising the concentration of β-mercaptoethanol, long time incubation at 65 °C, and nucleic acid precipitation with optimized volume of NaCl and isopropyl alcohol. Also, the A260/A280 and A260/A230 of extracted RNA were about 1.9-2.1and 2.2-2.3, respectively, revealing the high purity. Since the isolated RNA passed highly stringent quality control standards for sensitive reactions, including RNA sequencing and real-time PCR, it can be considered as a reliable and cost-effective method for RNA extraction from woody plants.

Shuttle Mission STS-50: Orbital Processing of High-Quality CdTe Compound Semiconductors Experiment: Final Flight Sample Characterization Report

NASA Technical Reports Server (NTRS)

Larson, David J.; Casagrande, Luis G.; DiMarzio, Don; Alexander, J. Iwan D.; Carlson, Fred; Lee, Taipo; Dudley, Michael; Raghathamachar, Balaji

1998-01-01

The Orbital Processing of High-Quality Doped and Alloyed CdTe Compound Semiconductors program was initiated to investigate, quantitatively, the influences of gravitationally dependent phenomena on the growth and quality of bulk compound semiconductors. The objective was to improve crystal quality (both structural and compositional) and to better understand and control the variables within the crystal growth production process. The empirical effort entailed the development of a terrestrial (one-g) experiment baseline for quantitative comparison with microgravity (mu-g) results. This effort was supported by the development of high-fidelity process models of heat transfer, fluid flow and solute redistribution, and thermo-mechanical stress occurring in the furnace, safety cartridge, ampoule, and crystal throughout the melting, seeding, crystal growth, and post-solidification processing. In addition, the sensitivity of the orbital experiments was analyzed with respect to the residual microgravity (mu-g) environment, both steady state and g-jitter. CdZnTe crystals were grown in one-g and in mu-g. Crystals processed terrestrially were grown at the NASA Ground Control Experiments Laboratory (GCEL) and at Grumman Aerospace Corporation (now Northrop Grumman Corporation). Two mu-g crystals were grown in the Crystal Growth Furnace (CGF) during the First United States Microgravity Laboratory Mission (USML-1), STS-50, June 24 - July 9, 1992.

Data quality control and tools in passive seismic experiments exemplified on the Czech broadband seismic pool MOBNET in the AlpArray collaborative project

NASA Astrophysics Data System (ADS)

Vecsey, Luděk; Plomerová, Jaroslava; Jedlička, Petr; Munzarová, Helena; Babuška, Vladislav; AlpArray Working Group

2017-12-01

This paper focuses on major issues related to the data reliability and network performance of 20 broadband (BB) stations of the Czech (CZ) MOBNET (MOBile NETwork) seismic pool within the AlpArray seismic experiments. Currently used high-resolution seismological applications require high-quality data recorded for a sufficiently long time interval at seismological observatories and during the entire time of operation of the temporary stations. In this paper we present new hardware and software tools we have been developing during the last two decades while analysing data from several international passive experiments. The new tools help to assure the high-quality standard of broadband seismic data and eliminate potential errors before supplying data to seismological centres. Special attention is paid to crucial issues like the detection of sensor misorientation, timing problems, interchange of record components and/or their polarity reversal, sensor mass centring, or anomalous channel amplitudes due to, for example, imperfect gain. Thorough data quality control should represent an integral constituent of seismic data recording, preprocessing, and archiving, especially for data from temporary stations in passive seismic experiments. Large international seismic experiments require enormous efforts from scientists from different countries and institutions to gather hundreds of stations to be deployed in the field during a limited time period. In this paper, we demonstrate the beneficial effects of the procedures we have developed for acquiring a reliable large set of high-quality data from each group participating in field experiments. The presented tools can be applied manually or automatically on data from any seismic network.

Journal impact factor and methodological quality of surgical randomized controlled trials: an empirical study.

PubMed

Ahmed Ali, Usama; Reiber, Beata M M; Ten Hove, Joren R; van der Sluis, Pieter C; Gooszen, Hein G; Boermeester, Marja A; Besselink, Marc G

2017-11-01

The journal impact factor (IF) is often used as a surrogate marker for methodological quality. The objective of this study is to evaluate the relation between the journal IF and methodological quality of surgical randomized controlled trials (RCTs). Surgical RCTs published in PubMed in 1999 and 2009 were identified. According to IF, RCTs were divided into groups of low (<2), median (2-3) and high IF (>3), as well as into top-10 vs all other journals. Methodological quality characteristics and factors concerning funding, ethical approval and statistical significance of outcomes were extracted and compared between the IF groups. Additionally, a multivariate regression was performed. The median IF was 2.2 (IQR 2.37). The percentage of 'low-risk of bias' RCTs was 13% for top-10 journals vs 4% for other journals in 1999 (P < 0.02), and 30 vs 12% in 2009 (P < 0.02). Similar results were observed for high vs low IF groups. The presence of sample-size calculation, adequate generation of allocation and intention-to-treat analysis were independently associated with publication in higher IF journals; as were multicentre trials and multiple authors. Publication of RCTs in high IF journals is associated with moderate improvement in methodological quality compared to RCTs published in lower IF journals. RCTs with adequate sample-size calculation, generation of allocation or intention-to-treat analysis were associated with publication in a high IF journal. On the other hand, reporting a statistically significant outcome and being industry funded were not independently associated with publication in a higher IF journal.

Long-term quality assurance of [(18)F]-fluorodeoxyglucose (FDG) manufacturing.

PubMed

Gaspar, Ludovit; Reich, Michal; Kassai, Zoltan; Macasek, Fedor; Rodrigo, Luis; Kruzliak, Peter; Kovac, Peter

2016-01-01

Nine years of experience with 2286 commercial synthesis allowed us to deliver comprehensive information on the quality of (18)F-FDG production. Semi-automated FDG production line using Cyclone 18/9 machine (IBA Belgium), TRACERLab MXFDG synthesiser (GE Health, USA) using alkalic hydrolysis, grade "A" isolator with dispensing robotic unit (Tema Sinergie, Italy), and automatic control system under GAMP5 (minus2, Slovakia) was assessed by TQM tools as highly reliable aseptic production line, fully compliant with Good Manufacturing Practice and just-in-time delivery of FDG radiopharmaceutical. Fluoride-18 is received in steady yield and of very high radioactive purity. Synthesis yields exhibited high variance connected probably with quality of disposable cassettes and chemicals sets. Most performance non-conformities within the manufacturing cycle occur at mechanical nodes of dispensing unit. The long-term monitoring of 2286 commercial synthesis indicated high reliability of automatic synthesizers. Shewhart chart and ANOVA analysis showed that minor non-compliances occurred were mostly caused by the declinations of less experienced staff from standard operation procedures, and also by quality of automatic cassettes. Only 15 syntheses were found unfinished and in 4 cases the product was out-of-specification of European Pharmacopoeia. Most vulnerable step of manufacturing was dispensing and filling in grade "A" isolator. Its cleanliness and sterility was fully controlled under the investigated period by applying hydrogen peroxide vapours (VHP). Our experience with quality assurance in the production of [(18)F]-fluorodeoxyglucose (FDG) at production facility of BIONT based on TRACERlab MXFDG production module can be used for bench-marking of the emerging manufacturing and automated manufacturing systems.

Long-term quality assurance of [18F]-fluorodeoxyglucose (FDG) manufacturing

PubMed Central

Gaspar, Ludovit; Reich, Michal; Kassai, Zoltan; Macasek, Fedor; Rodrigo, Luis; Kruzliak, Peter; Kovac, Peter

2016-01-01

Nine years of experience with 2286 commercial synthesis allowed us to deliver comprehensive information on the quality of 18F-FDG production. Semi-automated FDG production line using Cyclone 18/9 machine (IBA Belgium), TRACERLab MXFDG synthesiser (GE Health, USA) using alkalic hydrolysis, grade “A” isolator with dispensing robotic unit (Tema Sinergie, Italy), and automatic control system under GAMP5 (minus2, Slovakia) was assessed by TQM tools as highly reliable aseptic production line, fully compliant with Good Manufacturing Practice and just-in-time delivery of FDG radiopharmaceutical. Fluoride-18 is received in steady yield and of very high radioactive purity. Synthesis yields exhibited high variance connected probably with quality of disposable cassettes and chemicals sets. Most performance non-conformities within the manufacturing cycle occur at mechanical nodes of dispensing unit. The long-term monitoring of 2286 commercial synthesis indicated high reliability of automatic synthesizers. Shewhart chart and ANOVA analysis showed that minor non-compliances occurred were mostly caused by the declinations of less experienced staff from standard operation procedures, and also by quality of automatic cassettes. Only 15 syntheses were found unfinished and in 4 cases the product was out-of-specification of European Pharmacopoeia. Most vulnerable step of manufacturing was dispensing and filling in grade “A” isolator. Its cleanliness and sterility was fully controlled under the investigated period by applying hydrogen peroxide vapours (VHP). Our experience with quality assurance in the production of [18F]-fluorodeoxyglucose (FDG) at production facility of BIONT based on TRACERlab MXFDG production module can be used for bench-marking of the emerging manufacturing and automated manufacturing systems. PMID:27508102

A system identification approach for developing model predictive controllers of antibody quality attributes in cell culture processes.

PubMed

Downey, Brandon; Schmitt, John; Beller, Justin; Russell, Brian; Quach, Anthony; Hermann, Elizabeth; Lyon, David; Breit, Jeffrey

2017-11-01

As the biopharmaceutical industry evolves to include more diverse protein formats and processes, more robust control of Critical Quality Attributes (CQAs) is needed to maintain processing flexibility without compromising quality. Active control of CQAs has been demonstrated using model predictive control techniques, which allow development of processes which are robust against disturbances associated with raw material variability and other potentially flexible operating conditions. Wide adoption of model predictive control in biopharmaceutical cell culture processes has been hampered, however, in part due to the large amount of data and expertise required to make a predictive model of controlled CQAs, a requirement for model predictive control. Here we developed a highly automated, perfusion apparatus to systematically and efficiently generate predictive models using application of system identification approaches. We successfully created a predictive model of %galactosylation using data obtained by manipulating galactose concentration in the perfusion apparatus in serialized step change experiments. We then demonstrated the use of the model in a model predictive controller in a simulated control scenario to successfully achieve a %galactosylation set point in a simulated fed-batch culture. The automated model identification approach demonstrated here can potentially be generalized to many CQAs, and could be a more efficient, faster, and highly automated alternative to batch experiments for developing predictive models in cell culture processes, and allow the wider adoption of model predictive control in biopharmaceutical processes. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers Biotechnol. Prog., 33:1647-1661, 2017. © 2017 The Authors Biotechnology Progress published by Wiley Periodicals, Inc. on behalf of American Institute of Chemical Engineers.

Complex Controls on Groundwater Quality in Growing Mid-sized Cities: A Case Study Focused on Nitrate and Emerging Contaminants

NASA Astrophysics Data System (ADS)

Ohr, C. A.; Godsey, S.; Welhan, J. A.; Larson, D. M.; Lohse, K. A.; Finney, B.; Derryberry, D.

2015-12-01

Many regions rely on quality groundwater to support urban growth. Groundwater quality often responds in a complex manner to stressors such as land use change, climate change, or policy decisions. Urban growth patterns in mid-sized cities, especially ones that are growing urban centers in water-limited regions in the western US, control and are controlled by water availability and its quality. We present a case study from southeastern Idaho where urban growth over the past 20 years has included significant ex-urban expansion of houses that rely on septic systems rather than city sewer lines for their wastewater treatment. Septic systems are designed to mitigate some contaminants, but not others. In particular, nitrates and emerging contaminants, such as pharmaceuticals, are not removed by most septic systems. Thus, even well-maintained septic systems at sufficiently high densities can impact down gradient water quality. Here we present patterns of nitrate concentrations over the period from 1985-2015 from the Lower Portneuf River Valley in southeastern Idaho. Concentrations vary from 0.03 to 27.09 nitrate-nitrogen mg/L, with average values increasing significantly over the 30 year time period from 3.15 +/- 0.065 to 3.57 +/- 0.43 mg/L. We examine temporal changes in locations of nitrate hotspots, and present pilot data on emerging contaminants of concern. Initial results suggest that high nitrate levels are generally associated with higher septic densities, but that this pattern is influenced by legacy agricultural uses and strongly controlled by underlying aquifer properties. Future work will include more detailed hydrological modeling to predict changes in hotspot locations under potential climate change scenarios.

TU-FG-201-12: Designing a Risk-Based Quality Assurance Program for a Newly Implemented Y-90 Microspheres Procedure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vile, D; Zhang, L; Cuttino, L

2016-06-15

Purpose: To create a quality assurance program based upon a risk-based assessment of a newly implemented SirSpheres Y-90 procedure. Methods: A process map was created for a newly implemented SirSpheres procedure at a community hospital. The process map documented each step of this collaborative procedure, as well as the roles and responsibilities of each member. From the process map, different potential failure modes were determined as well as any current controls in place. From this list, a full failure mode and effects analysis (FMEA) was performed by grading each failure mode’s likelihood of occurrence, likelihood of detection, and potential severity.more » These numbers were then multiplied to compute the risk priority number (RPN) for each potential failure mode. Failure modes were then ranked based on their RPN. Additional controls were then added, with failure modes corresponding to the highest RPNs taking priority. Results: A process map was created that succinctly outlined each step in the SirSpheres procedure in its current implementation. From this, 72 potential failure modes were identified and ranked according to their associated RPN. Quality assurance controls and safety barriers were then added for failure modes associated with the highest risk being addressed first. Conclusion: A quality assurance program was created from a risk-based assessment of the SirSpheres process. Process mapping and FMEA were effective in identifying potential high-risk failure modes for this new procedure, which were prioritized for new quality assurance controls. TG 100 recommends the fault tree analysis methodology to design a comprehensive and effective QC/QM program, yet we found that by simply introducing additional safety barriers to address high RPN failure modes makes the whole process simpler and safer.« less

Advances in the control of wine spoilage by Zygosaccharomyces and Dekkera/Brettanomyces.

PubMed

Zuehlke, J M; Petrova, B; Edwards, C G

2013-01-01

Understanding the characteristics of yeast spoilage, as well as the available control technologies, is vital to producing consistent, high-quality wine. Zygosaccharomyces bailii contamination may result in refermentation and CO2 production in sweet wines or grape juice concentrate, whereas Brettanomyces bruxellensis spoilage often contributes off-odors and flavors to red wines. Early detection of these yeasts by selective/differential media or genetic methods is important to minimize potential spoilage. More established methods of microbial control include sulfur dioxide, dimethyl dicarbonate, and filtration. Current research is focused on the use of chitosan, pulsed electric fields, low electric current, and ultrasonics as means to protect wine quality.

Modernized build and test infrastructure for control software at ESO: highly flexible building, testing, and automatic quality practices for telescope control software

NASA Astrophysics Data System (ADS)

Pellegrin, F.; Jeram, B.; Haucke, J.; Feyrin, S.

2016-07-01

The paper describes the introduction of a new automatized build and test infrastructure, based on the open-source software Jenkins1, into the ESO Very Large Telescope control software to replace the preexisting in-house solution. A brief introduction to software quality practices is given, a description of the previous solution, the limitations of it and new upcoming requirements. Modifications required to adapt the new system are described, how these were implemented to current software and the results obtained. An overview on how the new system may be used in future projects is also presented.

Quality Assurance of RNA Expression Profiling in Clinical Laboratories

PubMed Central

Tang, Weihua; Hu, Zhiyuan; Muallem, Hind; Gulley, Margaret L.

2012-01-01

RNA expression profiles are increasingly used to diagnose and classify disease, based on expression patterns of as many as several thousand RNAs. To ensure quality of expression profiling services in clinical settings, a standard operating procedure incorporates multiple quality indicators and controls, beginning with preanalytic specimen preparation and proceeding thorough analysis, interpretation, and reporting. Before testing, histopathological examination of each cellular specimen, along with optional cell enrichment procedures, ensures adequacy of the input tissue. Other tactics include endogenous controls to evaluate adequacy of RNA and exogenous or spiked controls to evaluate run- and patient-specific performance of the test system, respectively. Unique aspects of quality assurance for array-based tests include controls for the pertinent outcome signatures that often supersede controls for each individual analyte, built-in redundancy for critical analytes or biochemical pathways, and software-supported scrutiny of abundant data by a laboratory physician who interprets the findings in a manner facilitating appropriate medical intervention. Access to high-quality reagents, instruments, and software from commercial sources promotes standardization and adoption in clinical settings, once an assay is vetted in validation studies as being analytically sound and clinically useful. Careful attention to the well-honed principles of laboratory medicine, along with guidance from government and professional groups on strategies to preserve RNA and manage large data sets, promotes clinical-grade assay performance. PMID:22020152

Physical and chemical characteristics of the longissimus dorsi from swine reared in climate-controlled and uncontrolled environments

NASA Astrophysics Data System (ADS)

de Mello, Juliana Lolli Malagoli; Berton, Mariana Piatto; de Cassia Dourado, Rita; Giampietro-Ganeco, Aline; de Souza, Rodrigo Alves; Ferrari, Fábio Borba; de Souza, Pedro Alves; Borba, Hirasilva

2017-10-01

The aim of this study was to evaluate the effect of ambient temperature on the physical and chemical characteristics of the longissimus dorsi muscle by comparing the quality of meat from pigs reared in a controlled and in an uncontrolled environment, the latter provided with a shallow pool. Twenty castrated male pigs of the Topigs line were randomly allotted to two treatments: a controlled environment, with constant temperature (22 °C) and relative humidity (70%); and an uncontrolled environment in a conventional shed for rearing pigs equipped with a shallow pool, where pigs were subject to climatic variations. Meat from pigs kept in the controlled environment showed a greater capacity to retain intracellular water, higher tenderness, and lower cholesterol levels than meat from pigs reared in the uncontrolled environment, but displayed higher lipid oxidation and a lower concentration of DHA. Treatments had no effect on color, pH, chemical composition, or fatty acid profile (except DHA concentration). Rearing pigs in sheds equipped with a shallow pool minimizes the effects of environmental heat on meat quality, allowing the production of high-quality meat in warm climate regions without expensive investments. Animals reared in an uncontrolled environment equipped with a shallow pool are able to produce meat with characteristics within the quality standards and with similar quality to that of meat from animals raised in controlled environment.

Physical and chemical characteristics of the longissimus dorsi from swine reared in climate-controlled and uncontrolled environments.

PubMed

de Mello, Juliana Lolli Malagoli; Berton, Mariana Piatto; de Cassia Dourado, Rita; Giampietro-Ganeco, Aline; de Souza, Rodrigo Alves; Ferrari, Fábio Borba; de Souza, Pedro Alves; Borba, Hirasilva

2017-10-01

The aim of this study was to evaluate the effect of ambient temperature on the physical and chemical characteristics of the longissimus dorsi muscle by comparing the quality of meat from pigs reared in a controlled and in an uncontrolled environment, the latter provided with a shallow pool. Twenty castrated male pigs of the Topigs line were randomly allotted to two treatments: a controlled environment, with constant temperature (22 °C) and relative humidity (70%); and an uncontrolled environment in a conventional shed for rearing pigs equipped with a shallow pool, where pigs were subject to climatic variations. Meat from pigs kept in the controlled environment showed a greater capacity to retain intracellular water, higher tenderness, and lower cholesterol levels than meat from pigs reared in the uncontrolled environment, but displayed higher lipid oxidation and a lower concentration of DHA. Treatments had no effect on color, pH, chemical composition, or fatty acid profile (except DHA concentration). Rearing pigs in sheds equipped with a shallow pool minimizes the effects of environmental heat on meat quality, allowing the production of high-quality meat in warm climate regions without expensive investments. Animals reared in an uncontrolled environment equipped with a shallow pool are able to produce meat with characteristics within the quality standards and with similar quality to that of meat from animals raised in controlled environment.

Improving Diabetes care through Examining, Advising, and prescribing (IDEA): protocol for a theory-based cluster randomised controlled trial of a multiple behaviour change intervention aimed at primary healthcare professionals

PubMed Central

2014-01-01

Background New clinical research findings may require clinicians to change their behaviour to provide high-quality care to people with type 2 diabetes, likely requiring them to change multiple different clinical behaviours. The present study builds on findings from a UK-wide study of theory-based behavioural and organisational factors associated with prescribing, advising, and examining consistent with high-quality diabetes care. Aim To develop and evaluate the effectiveness and cost of an intervention to improve multiple behaviours in clinicians involved in delivering high-quality care for type 2 diabetes. Design/methods We will conduct a two-armed cluster randomised controlled trial in 44 general practices in the North East of England to evaluate a theory-based behaviour change intervention. We will target improvement in six underperformed clinical behaviours highlighted in quality standards for type 2 diabetes: prescribing for hypertension; prescribing for glycaemic control; providing physical activity advice; providing nutrition advice; providing on-going education; and ensuring that feet have been examined. The primary outcome will be the proportion of patients appropriately prescribed and examined (using anonymised computer records), and advised (using anonymous patient surveys) at 12 months. We will use behaviour change techniques targeting motivational, volitional, and impulsive factors that we have previously demonstrated to be predictive of multiple health professional behaviours involved in high-quality type 2 diabetes care. We will also investigate whether the intervention was delivered as designed (fidelity) by coding audiotaped workshops and interventionist delivery reports, and operated as hypothesised (process evaluation) by analysing responses to theory-based postal questionnaires. In addition, we will conduct post-trial qualitative interviews with practice teams to further inform the process evaluation, and a post-trial economic analysis to estimate the costs of the intervention and cost of service use. Discussion Consistent with UK Medical Research Council guidance and building on previous development research, this pragmatic cluster randomised trial will evaluate the effectiveness of a theory-based complex intervention focusing on changing multiple clinical behaviours to improve quality of diabetes care. Trial registration ISRCTN66498413. PMID:24886606

Controlling high-throughput manufacturing at the nano-scale

NASA Astrophysics Data System (ADS)

Cooper, Khershed P.

2013-09-01

Interest in nano-scale manufacturing research and development is growing. The reason is to accelerate the translation of discoveries and inventions of nanoscience and nanotechnology into products that would benefit industry, economy and society. Ongoing research in nanomanufacturing is focused primarily on developing novel nanofabrication techniques for a variety of applications—materials, energy, electronics, photonics, biomedical, etc. Our goal is to foster the development of high-throughput methods of fabricating nano-enabled products. Large-area parallel processing and highspeed continuous processing are high-throughput means for mass production. An example of large-area processing is step-and-repeat nanoimprinting, by which nanostructures are reproduced again and again over a large area, such as a 12 in wafer. Roll-to-roll processing is an example of continuous processing, by which it is possible to print and imprint multi-level nanostructures and nanodevices on a moving flexible substrate. The big pay-off is high-volume production and low unit cost. However, the anticipated cost benefits can only be realized if the increased production rate is accompanied by high yields of high quality products. To ensure product quality, we need to design and construct manufacturing systems such that the processes can be closely monitored and controlled. One approach is to bring cyber-physical systems (CPS) concepts to nanomanufacturing. CPS involves the control of a physical system such as manufacturing through modeling, computation, communication and control. Such a closely coupled system will involve in-situ metrology and closed-loop control of the physical processes guided by physics-based models and driven by appropriate instrumentation, sensing and actuation. This paper will discuss these ideas in the context of controlling high-throughput manufacturing at the nano-scale.

Ultrasonically Assisted Cutting of Bio-tissues in Microtomy

NASA Astrophysics Data System (ADS)

Wang, Dong; Roy, Anish; Silberschmidt, Vadim V.

Modern-day histology of bio-tissues for supporting stratified medicine diagnoses requires high-precision cutting to ensure high quality extremely thin specimens used in analysis. Additionally, the cutting quality is significantly affected by a wide variety of soft and hard tissues in the samples. This paper deals with development of a next generation of microtome employing introduction of controlled ultrasonic vibration to realise a hybrid cutting process of bio-tissues. The study is based on a combination of advanced experimental and numerical (finite-element) studies of multi-body dynamics of a cutting system. The quality of cut samples produced with the prototype is compared with the state-of-the-art.

Chest CT in children: anesthesia and atelectasis.

PubMed

Newman, Beverley; Krane, Elliot J; Gawande, Rakhee; Holmes, Tyson H; Robinson, Terry E

2014-02-01

There has been an increasing tendency for anesthesiologists to be responsible for providing sedation or anesthesia during chest CT imaging in young children. Anesthesia-related atelectasis noted on chest CT imaging has proven to be a common and troublesome problem, affecting image quality and diagnostic sensitivity. To evaluate the safety and effectiveness of a standardized anesthesia, lung recruitment, controlled-ventilation technique developed at our institution to prevent atelectasis for chest CT imaging in young children. Fifty-six chest CT scans were obtained in 42 children using a research-based intubation, lung recruitment and controlled-ventilation CT scanning protocol. These studies were compared with 70 non-protocolized chest CT scans under anesthesia taken from 18 of the same children, who were tested at different times, without the specific lung recruitment and controlled-ventilation technique. Two radiology readers scored all inspiratory chest CT scans for overall CT quality and atelectasis. Detailed cardiorespiratory parameters were evaluated at baseline, and during recruitment and inspiratory imaging on 21 controlled-ventilation cases and 8 control cases. Significant differences were noted between groups for both quality and atelectasis scores with optimal scoring demonstrated in the controlled-ventilation cases where 70% were rated very good to excellent quality scans compared with only 24% of non-protocol cases. There was no or minimal atelectasis in 48% of the controlled ventilation cases compared to 51% of non-protocol cases with segmental, multisegmental or lobar atelectasis present. No significant difference in cardiorespiratory parameters was found between controlled ventilation and other chest CT cases and no procedure-related adverse events occurred. Controlled-ventilation infant CT scanning under general anesthesia, utilizing intubation and recruitment maneuvers followed by chest CT scans, appears to be a safe and effective method to obtain reliable and reproducible high-quality, motion-free chest CT images in children.

Real time monitoring of powder blend bulk density for coupled feed-forward/feed-back control of a continuous direct compaction tablet manufacturing process.

PubMed

Singh, Ravendra; Román-Ospino, Andrés D; Romañach, Rodolfo J; Ierapetritou, Marianthi; Ramachandran, Rohit

2015-11-10

The pharmaceutical industry is strictly regulated, where precise and accurate control of the end product quality is necessary to ensure the effectiveness of the drug products. For such control, the process and raw materials variability ideally need to be fed-forward in real time into an automatic control system so that a proactive action can be taken before it can affect the end product quality. Variations in raw material properties (e.g., particle size), feeder hopper level, amount of lubrication, milling and blending action, applied shear in different processing stages can affect the blend density significantly and thereby tablet weight, hardness and dissolution. Therefore, real time monitoring of powder bulk density variability and its incorporation into the automatic control system so that its effect can be mitigated proactively and efficiently is highly desired. However, real time monitoring of powder bulk density is still a challenging task because of different level of complexities. In this work, powder bulk density which has a significant effect on the critical quality attributes (CQA's) has been monitored in real time in a pilot-plant facility, using a NIR sensor. The sensitivity of the powder bulk density on critical process parameters (CPP's) and CQA's has been analyzed and thereby feed-forward controller has been designed. The measured signal can be used for feed-forward control so that the corrective actions on the density variations can be taken before they can influence the product quality. The coupled feed-forward/feed-back control system demonstrates improved control performance and improvements in the final product quality in the presence of process and raw material variations. Copyright © 2015 Elsevier B.V. All rights reserved.

The CRAC cohort model: A computerized low cost registry of interventional cardiology with daily update and long-term follow-up.

PubMed

Rangé, G; Chassaing, S; Marcollet, P; Saint-Étienne, C; Dequenne, P; Goralski, M; Bardiére, P; Beverilli, F; Godillon, L; Sabine, B; Laure, C; Gautier, S; Hakim, R; Albert, F; Angoulvant, D; Grammatico-Guillon, L

2018-05-01

To assess the reliability and low cost of a computerized interventional cardiology (IC) registry to prospectively and systematically collect high-quality data for all consecutive coronary patients referred for coronary angiogram or/and coronary angioplasty. Rigorous clinical practice assessment is a key factor to improve prognosis in IC. A prospective and permanent registry could achieve this goal but, presumably, at high cost and low level of data quality. One multicentric IC registry (CRAC registry), fully integrated to usual coronary activity report software, started in the centre Val-de-Loire (CVL) French region in 2014. Quality assessment of CRAC registry was conducted on five IC CathLab of the CVL region, from January 1st to December 31st 2014. Quality of collected data was evaluated by measuring procedure exhaustivity (comparing with data from hospital information system), data completeness (quality controls) and data consistency (by checking complete medical charts as gold standard). Cost per procedure (global registry operating cost/number of collected procedures) was also estimated. CRAC model provided a high-quality level with 98.2% procedure completeness, 99.6% data completeness and 89% data consistency. The operating cost per procedure was €14.70 ($16.51) for data collection and quality control, including ST-segment elevation myocardial infarction (STEMI) preadmission information and one-year follow-up after angioplasty. This integrated computerized IC registry led to the construction of an exhaustive, reliable and costless database, including all coronary patients entering in participating IC centers in the CVL region. This solution will be developed in other French regions, setting up a national IC database for coronary patients in 2020: France PCI. Copyright © 2018 Elsevier Masson SAS. All rights reserved.

Aircraft flight test trajectory control

NASA Technical Reports Server (NTRS)

Menon, P. K. A.; Walker, R. A.

1988-01-01

Two control law design techniques are compared and the performance of the resulting controllers evaluated. The design requirement is for a flight test trajectory controller (FTTC) capable of closed-loop, outer-loop control of an F-15 aircraft performing high-quality research flight test maneuvers. The maneuver modeling, linearization, and design methodologies utilized in this research, are detailed. The results of applying these FTTCs to a nonlinear F-15 simulation are presented.

Effect of process parameters on formability of laser melting deposited 12CrNi2 alloy steel

NASA Astrophysics Data System (ADS)

Peng, Qian; Dong, Shiyun; Kang, Xueliang; Yan, Shixing; Men, Ping

2018-03-01

As a new rapid prototyping technology, the laser melting deposition technology not only has the advantages of fast forming, high efficiency, but also free control in the design and production chain. Therefore, it has drawn extensive attention from community.With the continuous improvement of steel performance requirements, high performance low-carbon alloy steel is gradually integrated into high-tech fields such as aerospace, high-speed train and armored equipment.However, it is necessary to further explore and optimize the difficult process of laser melting deposited alloy steel parts to achieve the performance and shape control.This article took the orthogonal experiment on alloy steel powder by laser melting deposition ,and revealed the influence rule of the laser power, scanning speed, powder gas flow on the quality of the sample than the dilution rate, surface morphology and microstructure analysis were carried out.Finally, under the optimum technological parameters, the Excellent surface quality of the alloy steel forming part with high density, no pore and cracks was obtained.

Calculating the quality of public high-throughput sequencing data to obtain a suitable subset for reanalysis from the Sequence Read Archive

PubMed Central

Nakazato, Takeru; Bono, Hidemasa

2017-01-01

Abstract It is important for public data repositories to promote the reuse of archived data. In the growing field of omics science, however, the increasing number of submissions of high-throughput sequencing (HTSeq) data to public repositories prevents users from choosing a suitable data set from among the large number of search results. Repository users need to be able to set a threshold to reduce the number of results to obtain a suitable subset of high-quality data for reanalysis. We calculated the quality of sequencing data archived in a public data repository, the Sequence Read Archive (SRA), by using the quality control software FastQC. We obtained quality values for 1 171 313 experiments, which can be used to evaluate the suitability of data for reuse. We also visualized the data distribution in SRA by integrating the quality information and metadata of experiments and samples. We provide quality information of all of the archived sequencing data, which enable users to obtain sufficient quality sequencing data for reanalyses. The calculated quality data are available to the public in various formats. Our data also provide an example of enhancing the reuse of public data by adding metadata to published research data by a third party. PMID:28449062

Safety and EEG data quality of concurrent high-density EEG and high-speed fMRI at 3 Tesla

PubMed Central

Foged, Mette Thrane; Lindberg, Ulrich; Vakamudi, Kishore; Larsson, Henrik B. W.; Pinborg, Lars H.; Kjær, Troels W.; Fabricius, Martin; Svarer, Claus; Ozenne, Brice; Thomsen, Carsten; Beniczky, Sándor; Posse, Stefan

2017-01-01

Purpose Concurrent EEG and fMRI is increasingly used to characterize the spatial-temporal dynamics of brain activity. However, most studies to date have been limited to conventional echo-planar imaging (EPI). There is considerable interest in integrating recently developed high-speed fMRI methods with high-density EEG to increase temporal resolution and sensitivity for task-based and resting state fMRI, and for detecting interictal spikes in epilepsy. In the present study using concurrent high-density EEG and recently developed high-speed fMRI methods, we investigate safety of radiofrequency (RF) related heating, the effect of EEG on cortical signal-to-noise ratio (SNR) in fMRI, and assess EEG data quality. Materials and methods The study compared EPI, multi-echo EPI, multi-band EPI and multi-slab echo-volumar imaging pulse sequences, using clinical 3 Tesla MR scanners from two different vendors that were equipped with 64- and 256-channel MR-compatible EEG systems, respectively, and receive only array head coils. Data were collected in 11 healthy controls (3 males, age range 18–70 years) and 13 patients with epilepsy (8 males, age range 21–67 years). Three of the healthy controls were scanned with the 256-channel EEG system, the other subjects were scanned with the 64-channel EEG system. Scalp surface temperature, SNR in occipital cortex and head movement were measured with and without the EEG cap. The degree of artifacts and the ability to identify background activity was assessed by visual analysis by a trained expert in the 64 channel EEG data (7 healthy controls, 13 patients). Results RF induced heating at the surface of the EEG electrodes during a 30-minute scan period with stable temperature prior to scanning did not exceed 1.0° C with either EEG system and any of the pulse sequences used in this study. There was no significant decrease in cortical SNR due to the presence of the EEG cap (p > 0.05). No significant differences in the visually analyzed EEG data quality were found between EEG recorded during high-speed fMRI and during conventional EPI (p = 0.78). Residual ballistocardiographic artifacts resulted in 58% of EEG data being rated as poor quality. Conclusion This study demonstrates that high-density EEG can be safely implemented in conjunction with high-speed fMRI and that high-speed fMRI does not adversely affect EEG data quality. However, the deterioration of the EEG quality due to residual ballistocardiographic artifacts remains a significant constraint for routine clinical applications of concurrent EEG-fMRI. PMID:28552957

Analysis and Design of Bridgeless Switched Mode Power Supply for Computers

NASA Astrophysics Data System (ADS)

Singh, S.; Bhuvaneswari, G.; Singh, B.

2014-09-01

Switched mode power supplies (SMPSs) used in computers need multiple isolated and stiffly regulated output dc voltages with different current ratings. These isolated multiple output dc voltages are obtained by using a multi-winding high frequency transformer (HFT). A half-bridge dc-dc converter is used here for obtaining different isolated and well regulated dc voltages. In the front end, non-isolated Single Ended Primary Inductance Converters (SEPICs) are added to improve the power quality in terms of low input current harmonics and high power factor (PF). Two non-isolated SEPICs are connected in a way to completely eliminate the need of single-phase diode-bridge rectifier at the front end. Output dc voltages at both the non-isolated and isolated stages are controlled and regulated separately for power quality improvement. A voltage mode control approach is used in the non-isolated SEPIC stage for simple and effective control whereas average current control is used in the second isolated stage.

Joint Optics Structures Experiment (JOSE)

NASA Technical Reports Server (NTRS)

Founds, David

1987-01-01

The objectives of the JOSE program is to develop, demonstrate, and evaluate active vibration suppression techniques for Directed Energy Weapons (DEW). DEW system performance is highly influenced by the line-of-sight (LOS) stability and in some cases by the wave front quality. The missions envisioned for DEW systems by the Strategic Defense Initiative require LOS stability and wave front quality to be significantly improved over any current demonstrated capability. The Active Control of Space Structures (ACOSS) program led to the development of a number of promising structural control techniques. DEW structures are vastly more complex than any structures controlled to date. They will be subject to disturbances with significantly higher magnitudes and wider bandwidths, while holding higher tolerances on allowable motions and deformations. Meeting the performance requirements of the JOSE program requires upgrading the ACOSS techniques to meet new more stringent requirements, the development of requisite sensors and acturators, improved control processors, highly accurate system identification methods, and the integration of hardware and methodologies into a successful demonstration.

Simulation Study of Impact of Aeroelastic Characteristics on Flying Qualities of a High Speed Civil Transport

NASA Technical Reports Server (NTRS)

Raney, David L.; Jackson, E. Bruce; Buttrill, Carey S.

2002-01-01

A piloted simulation study conducted in NASA Langley Visual Motion Simulator addressed the impact of dynamic aero- servoelastic effects on flying qualities of a High Speed Civil Transport. The intent was to determine effectiveness of measures to reduce the impact of aircraft flexibility on piloting tasks. Potential solutions examined were increasing frequency of elastic modes through structural stiffening, increasing damping of elastic modes through active control, elimination of control effector excitation of the lowest frequency elastic modes, and elimination of visual cues associated with elastic modes. Six test pilots evaluated and performed simulated maneuver tasks, encountering incidents wherein cockpit vibrations due to elastic modes fed back into the control stick through involuntary vibrations of the pilots upper body and arm. Structural stiffening and compensation of the visual display were of little benefit in alleviating this impact, while increased damping and elimination of control effector excitation of the elastic modes both offered great improvements when applied in sufficient degree.

Application of Motion Induced Remote-Field Eddy-Current effect to online inspection and quality examination of rolling metallic strips

NASA Astrophysics Data System (ADS)

Sun, Yushi; Udpa, Satish; Lord, William; Udpa, Lalita; Ouyang, Tianhe

2001-04-01

The Motion Induced Remote-Field Eddy-Current (MIRFEC) effect was first observed in 1994. The effect was first exploited for detecting pipeline stress corrosion cracks as a part of a research project sponsored by the U.S. Department of Transportation. This paper presents a new application of the MIRFEC effect for online inspection of rolling metallic strips. Currently, rolled metallic strips and sheets are inspected off-line, which is costly, time consuming and not ideal for quality control. A well-designed online diagnostic and control system for metal rolling process may be able to reduce cost, improve quality, and hence enhance competitiveness of the product. The overall objective of this paper is to demonstrate the feasibility of a new nondestructive measurement system for on-line diagnostics and control of metallic rolling process using the MIRFEC effect. The system can be used to monitor, in real time, metallic strips/sheets for possible anomalies, inclusions, voids, bubbles, lamination, as well as variations in its magnetic and other properties. The potential advantages of the MIRFEC system include simplicity, robustness, low cost, high reliability, quick and accurate signal classification and characterization. Such systems can be used for real-time process control, or off-line data analysis. The technique also allows operation at high temperatures, tolerates large lift-off and vibration, and high rolling speed. Results of finite element modeling of the MIRFEC effect and experimental measurement data obtained from a prototype system are presented.

[Association between psychosocial aspects of work and quality of life among motorcycle taxi drivers].

PubMed

Teixeira, Jules Ramon Brito; Boery, Eduardo Nagib; Casotti, Cezar Augusto; Araújo, Tânia Maria de; Pereira, Rafael; Ribeiro, Ícaro José Santos; Rios, Marcela Andrade; Amorim, Camila Rego; Moreira, Ramon Missias; Boery, Rita Narriman Silva de Oliveira; Sales, Zenilda Nogueira

2015-01-01

This study aimed to evaluate the quality of life of motorcycle taxi drivers and the association with psychosocial characteristics of their work. This was a cross-sectional epidemiological study with a sample of 400 motorcycle taxi drivers in Jequié, Bahia State, Brazil. The study used a form containing demographic and socioeconomic data, WHO Quality of Life-Bref Questionnaire (WHOQOL-Bref), and the Job Content Questionnaire (JCQ). Motorcycle taxi drivers with greater decision-making control over their work showed better self-rated quality of life in the psychological domain; those with high psychological demands presented better self-rated quality of life in the social relations and environmental domains; those with high strain and active work showed better self-rated quality of life in the social and environmental domains. The psychosocial work environment and especially decision-making autonomy were thus important determinants of self-rated quality of life in this group of motorcycle taxi drivers.

Influence of modified atmosphere packaging on 'Star Ruby' grapefruit phytochemicals.

PubMed

Chaudhary, Priyanka R; Jayaprakasha, G K; Porat, Ron; Patil, Bhimanagouda S

2015-01-28

Modified atmosphere packaging (MAP) can extend the shelf life of salads, vegetables, and fruits by generating a storage environment with low O2, high CO2, and high humidity. The current study investigates the effect of modified atmosphere and humidity generated by two plastic films, microperforated bags (MIPBs) and macroperforated bags (MAPBs), on the levels of phytochemicals present in 'Star Ruby' grapefruits (Citrus paradisi, Macf.) stored for 16 weeks at 10 °C. Control fruits were stored without any packaging film. Juice samples were analyzed every 4 weeks for ascorbic acid, carotenoids, limonoids, flavonoids, and furocoumarins and assessed for quality parameters. MAP significantly reduced weight loss compared to control grapefruits. Control fruits had more β-carotene, lycopene, and furocoumarin compared with the fruits in MAP. Flavonoid content was highest in fruits stored in MAPB (P < 0.05), while fruits stored in MIPB showed no significant difference in flavonoid content compared to control (P > 0.05). The MAP treatments did not significantly affect ascorbic acid, limonoids, or fruit quality parameters, including total soluble solids, acidity, ripening ratio, decay and disorders, fruit taste, and off-flavors after 16 weeks of storage. These results suggest that MAP can be used to maintain the quality of 'Star Ruby' grapefruit with no detrimental effect on health-promoting phytochemicals.

Freshness maintenance of cherries ready for consumption using convenient, microperforated, bio-based packaging.

PubMed

Koutsimanis, Georgios; Harte, Janice; Almenar, Eva

2015-03-30

Current consumer demand for high-quality ready-to-eat fresh fruit in convenient bio-based packaging was met utilizing sanitized stem-free sweet cherries and a polylactic acid (PLA) cup with a PLA peelable microperforated lid. The newly developed packaging system was compared with the petroleum-based macroperforated bag currently used for retail. After 27 days of storage at 1 °C, the PLA package maintained the cherry firmness, compared with a 50% reduction of the controls. No fungal decay was detected in the cherries stored in PLA, while the controls were non-marketable after 21 days. The PLA package allowed minimal weight loss (0.8%), compared with a weight loss of approximately 16% in the controls. Differences in the cherry aroma, color, acidity, soluble solids content, pH and quality index were also caused by the packaging type. A consumer sensory evaluation showed that cherries stored in PLA packages were more acceptable than those of the controls for appearance, texture, flavor and overall acceptability. The new package matched both the consumer demand for high-quality fresh fruit ready for consumption in convenient bio-based packaging and the extended fruit marketability and consumer satisfaction desired by industry. © 2014 Society of Chemical Industry.

Acupuncture for depression.

PubMed

Smith, Caroline A; Armour, Mike; Lee, Myeong Soo; Wang, Li-Qiong; Hay, Phillipa J

2018-03-04

Depression is recognised as a major public health problem that has a substantial impact on individuals and on society. People with depression may consider using complementary therapies such as acupuncture, and an increasing body of research has been undertaken to assess the effectiveness of acupuncture for treatment of individuals with depression. This is the second update of this review. To examine the effectiveness and adverse effects of acupuncture for treatment of individuals with depression.To determine:• Whether acupuncture is more effective than treatment as usual/no treatment/wait list control for treating and improving quality of life for individuals with depression.• Whether acupuncture is more effective than control acupuncture for treating and improving quality of life for individuals with depression.• Whether acupuncture is more effective than pharmacological therapies for treating and improving quality of life for individuals with depression.• Whether acupuncture plus pharmacological therapy is more effective than pharmacological therapy alone for treating and improving quality of life for individuals with depression.• Whether acupuncture is more effective than psychological therapies for treating and improving quality of life for individuals with depression.• Adverse effects of acupuncture compared with treatment as usual/no treatment/wait list control, control acupuncture, pharmacological therapies, and psychological therapies for treatment of individuals with depression. We searched the following databases to June 2016: Cochrane Common Mental Disorders Group Controlled Trials Register (CCMD-CTR), Korean Studies Information Service System (KISS), DBPIA (Korean article database website), Korea Institute of Science and Technology Information, Research Information Service System (RISS), Korea Med, Korean Medical Database (KM base), and Oriental Medicine Advanced Searching Integrated System (OASIS), as well as several Korean medical journals. Review criteria called for inclusion of all published and unpublished randomised controlled trials comparing acupuncture versus control acupuncture, no treatment, medication, other structured psychotherapies (cognitive-behavioural therapy, psychotherapy, or counselling), or standard care. Modes of treatment included acupuncture, electro-acupuncture, and laser acupuncture. Participants included adult men and women with depression diagnosed by Diagnostic and Statistical Manual of Mental Disorders Fourth Edition (DSM-IV), Research Diagnostic Criteria (RDC), International Statistical Classification of Diseases and Related Health Problems (ICD), or Chinese Classification of Mental Disorders Third Edition Revised (CCMD-3-R). If necessary, we used trial authors' definitions of depressive disorder. We performed meta-analyses using risk ratios (RRs) for dichotomous outcomes and standardised mean differences (SMDs) for continuous outcomes, with 95% confidence intervals (CIs). Primary outcomes were reduction in the severity of depression, measured by self-rating scales or by clinician-rated scales, and improvement in depression, defined as remission versus no remission. We assessed evidence quality using the GRADE method. This review is an update of previous versions and includes 64 studies (7104 participants). Most studies were at high risk of performance bias, at high or unclear risk of detection bias, and at low or unclear risk of selection bias, attrition bias, reporting bias, and other bias.Acupuncture versus no treatment/wait list/treatment as usualWe found low-quality evidence suggesting that acupuncture (manual and electro-) may moderately reduce the severity of depression by end of treatment (SMD -0.66, 95% CI -1.06 to -0.25, five trials, 488 participants). It is unclear whether data show differences between groups in the risk of adverse events (RR 0.89, 95% CI 0.35 to 2.24, one trial, 302 participants; low-quality evidence).Acupuncture versus control acupuncture (invasive, non-invasive sham controls)Acupuncture may be associated with a small reduction in the severity of depression of 1.69 points on the Hamilton Depression Rating Scale (HAMD) by end of treatment (95% CI -3.33 to -0.05, 14 trials, 841 participants; low-quality evidence). It is unclear whether data show differences between groups in the risk of adverse events (RR 1.63, 95% CI 0.93 to 2.86, five trials, 300 participants; moderate-quality evidence).Acupuncture versus medicationWe found very low-quality evidence suggesting that acupuncture may confer small benefit in reducing the severity of depression by end of treatment (SMD -0.23, 95% CI -0.40 to -0.05, 31 trials, 3127 participants). Studies show substantial variation resulting from use of different classes of medications and different modes of acupuncture stimulation. Very low-quality evidence suggests lower ratings of adverse events following acupuncture compared with medication alone, as measured by the Montgomery-Asberg Depression Rating Scale (MADRS) (mean difference (MD) -4.32, 95% CI -7.41 to -1.23, three trials, 481 participants).Acupuncture plus medication versus medication aloneWe found very low-quality evidence suggesting that acupuncture is highly beneficial in reducing the severity of depression by end of treatment (SMD -1.15, 95% CI -1.63 to -0.66, 11 trials, 775 participants). Studies show substantial variation resulting from use of different modes of acupuncture stimulation. It is unclear whether differences in adverse events are associated with different modes of acupuncture (SMD -1.32, 95% CI -2.86 to 0.23, three trials, 200 participants; very low-quality evidence).Acupuncture versus psychological therapyIt is unclear whether data show differences between acupuncture and psychological therapy in the severity of depression by end of treatment (SMD -0.5, 95% CI -1.33 to 0.33, two trials, 497 participants; low-quality evidence). Low-quality evidence suggests no differences between groups in rates of adverse events (RR 0.62, 95% CI 0.29 to 1.33, one trial, 452 participants). The reduction in severity of depression was less when acupuncture was compared with control acupuncture than when acupuncture was compared with no treatment control, although in both cases, results were rated as providing low-quality evidence. The reduction in severity of depression with acupuncture given alone or in conjunction with medication versus medication alone is uncertain owing to the very low quality of evidence. The effect of acupuncture compared with psychological therapy is unclear. The risk of adverse events with acupuncture is also unclear, as most trials did not report adverse events adequately. Few studies included follow-up periods or assessed important outcomes such as quality of life. High-quality randomised controlled trials are urgently needed to examine the clinical efficacy and acceptability of acupuncture, as well as its effectiveness, compared with acupuncture controls, medication, or psychological therapies.

Publishing Single-Case Research Design Studies That Do Not Demonstrate Experimental Control

ERIC Educational Resources Information Center

Tincani, Matt; Travers, Jason

2018-01-01

Demonstration of experimental control is considered a hallmark of high-quality single-case research design (SCRD). Studies that fail to demonstrate experimental control may not be published because researchers are unwilling to submit these papers for publication and journals are unlikely to publish negative results (i.e., the file drawer effect).…

High reduction of ozone and particulate matter during the 2016 G-20 summit in Hangzhou by forced emission controls of industry and traffic

EPA Science Inventory

Many regions in China experience air pollution episodes because of the rapid urbanization and industrialization over the past decades. Here we analyzed the effect of emission controls implemented during the G-20 2016 Hangzhou summit on air quality. Emission controls included a fo...

Integrity management of offshore structures and its implication on computation of structural action effects and resistance

NASA Astrophysics Data System (ADS)

Moan, T.

2017-12-01

An overview of integrity management of offshore structures, with emphasis on the oil and gas energy sector, is given. Based on relevant accident experiences and means to control the associated risks, accidents are categorized from a technical-physical as well as human and organizational point of view. Structural risk relates to extreme actions as well as structural degradation. Risk mitigation measures, including adequate design criteria, inspection, repair and maintenance as well as quality assurance and control of engineering processes, are briefly outlined. The current status of risk and reliability methodology to aid decisions in the integrity management is briefly reviewed. Finally, the need to balance the uncertainties in data, methods and computational efforts and the cautious use and quality assurance and control in applying high fidelity methods to avoid human errors, is emphasized, and with a plea to develop both high fidelity as well as efficient, simplified methods for design.

Automation of testing modules of controller ELSY-ТМК

NASA Astrophysics Data System (ADS)

Dolotov, A. E.; Dolotova, R. G.; Petuhov, D. V.; Potapova, A. P.

2017-01-01

In modern life, there are means for automation of various processes which allow one to provide high quality standards of released products and to raise labour efficiency. In the given paper, the data on the automation of the test process of the ELSY-TMK controller [1] is presented. The ELSY-TMK programmed logic controller is an effective modular platform for construction of automation systems for small and average branches of industrial production. The modern and functional standard of communication and open environment of the logic controller give a powerful tool of wide spectrum applications for industrial automation. The algorithm allows one to test controller modules by operating the switching system and external devices faster and at a higher level of quality than a human without such means does.

Implementation of high performance concrete in Louisiana bridges : interim report.

DOT National Transportation Integrated Search

1998-02-01

The report contains a research plan to assist in the implementation of high performance concrete in the Charenton Canal Bridge in Louisiana. The research involves a literature review, plan review, development of a quality control program for the conc...

Sleep quality and its relationship with quality of life among high-risk pregnant women (gestational diabetes and hypertension).

PubMed

Saadati, Fatemeh; Sehhatiei Shafaei, Fahimeh; Mirghafourvand, Mozhgan

2018-01-01

Sleep is one of the most basic human requirements. This research aims at determining the status of sleep quality and its relationship with quality of life among high-risk pregnant women in Tabriz, Iran, in 2015. This research was a sectional study done on 364 qualified women in 28-36 weeks of pregnancy suffering from mild preeclampsia and gestational diabetes. The sampling was done as convenience. Personal-social-midwifery questionnaire, Pittsburg sleep quality, and quality of life in pregnancy (QOL-ORAV) were used for gathering data. Multivariate linear regression model was used for determining the relationship between sleep quality and its subsets with quality of life and controlling confounders. In the current study, the prevalence of sleep disturbance was 96.4%. Mean (SD) of the total score of sleep quality was 10.1 (4.1) and the total score of quality of life was 61.7 (17.3). According to Pearson's correlation test, there was statistically significant relationship between quality of life and sleep quality and all its subsets except sleep duration and use of sleep medication (p < 0.001). Meanwhile, according to the multivariate linear regression model, sleep latency, day time dysfunction, health status, and home air-conditioning were related with quality of life. The findings of current research show that sleep quality is low among high-risk pregnant women and quality of life is medium. So, it is necessary that required training is given by health cares for improving sleep quality and quality of life to mothers.

Method of Analysis by the U.S. Geological Survey California District Sacramento Laboratory-- Determination of Dissolved Organic Carbon in Water by High Temperature Catalytic Oxidation, Method Validation, and Quality-Control Practices

USGS Publications Warehouse

Bird, Susan M.; Fram, Miranda S.; Crepeau, Kathryn L.

2003-01-01

An analytical method has been developed for the determination of dissolved organic carbon concentration in water samples. This method includes the results of the tests used to validate the method and the quality-control practices used for dissolved organic carbon analysis. Prior to analysis, water samples are filtered to remove suspended particulate matter. A Shimadzu TOC-5000A Total Organic Carbon Analyzer in the nonpurgeable organic carbon mode is used to analyze the samples by high temperature catalytic oxidation. The analysis usually is completed within 48 hours of sample collection. The laboratory reporting level is 0.22 milligrams per liter.

Dynamic stability and handling qualities tests on a highly augmented, statically unstable airplane

NASA Technical Reports Server (NTRS)

Gera, Joseph; Bosworth, John T.

1987-01-01

Initial envelope clearance and subsequent flight testing of a new, fully augmented airplane with an extremely high degree of static instability can place unusual demands on the flight test approach. Previous flight test experience with these kinds of airplanes is very limited or nonexistent. The safe and efficient flight testing may be further complicated by a multiplicity of control effectors that may be present on this class of airplanes. This paper describes some novel flight test and analysis techniques in the flight dynamics and handling qualities area. These techniques were utilized during the initial flight envelope clearance of the X-29A aircraft and were largely responsible for the completion of the flight controls clearance program without any incidents or significant delays.

Lifestyle interventions to improve the quality of life of men with prostate cancer: A systematic review of randomized controlled trials.

PubMed

Menichetti, Julia; Villa, Silvia; Magnani, Tiziana; Avuzzi, Barbara; Bosetti, Davide; Marenghi, Cristina; Morlino, Sara; Rancati, Tiziana; Van Poppel, Hein; Salvioni, Roberto; Valdagni, Riccardo; Bellardita, Lara

2016-12-01

Improving quality of life is a key issue for patients with prostate cancer (PCa). Lifestyle interventions could positively impact the quality of life of patients. However, there is no clear-cut understanding of the role of diet, exercise and risky behaviour reduction in improving the quality of life of men with PCa. The aim of this review was to systematically summarize randomized controlled trials on lifestyle in PCa patients with quality of life as main outcome. 17 trials were included. Most of them referred to exercise interventions (71%) and involved men undergoing androgen deprivation therapy (47%). Exercise studies yielded the greater amount of positive results on quality of life outcomes (67%), followed by dietary interventions (50%) and combined lifestyle interventions (33%). In particular, supervised exercise programs with resistance training sessions were the ones producing greater convincing evidence for benefits on quality of life. Further studies with high methodological quality providing adequate information to develop evidence-based, personalized lifestyle interventions that can effectively ameliorate PCa-related quality of life are needed. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

An experiment shows that a well-designed report on costs and quality can help consumers choose high-value health care.

PubMed

Hibbard, Judith H; Greene, Jessica; Sofaer, Shoshanna; Firminger, Kirsten; Hirsh, Judith

2012-03-01

Advocates of health reform continue to pursue policies and tools that will make information about comparative costs and resource use available to consumers. Reformers expect that consumers will use the data to choose high-value providers-those who offer higher quality and lower prices-and thus contribute to the broader goal of controlling national health care spending. However, communicating this information effectively is more challenging than it might first appear. For example, consumers are more interested in the quality of health care than in its cost, and many perceive a low-cost provider to be substandard. In this study of 1,421 employees, we examined how different presentations of information affect the likelihood that consumers will make high-value choices. We found that a substantial minority of the respondents shied away from low-cost providers, and even consumers who pay a larger share of their health care costs themselves were likely to equate high cost with high quality. At the same time, we found that presenting cost data alongside easy-to-interpret quality information and highlighting high-value options improved the likelihood that consumers would choose those options. Reporting strategies that follow such a format will help consumers understand that a doctor who provides higher-quality care than other doctors does not necessarily cost more.

Quality of Diabetes Care: The Challenges of an Increasing Epidemic in Mexico. Results from Two National Health Surveys (2006 and 2012)

PubMed Central

Flores-Hernández, Sergio; Saturno-Hernández, Pedro J.; Reyes-Morales, Hortensia; Barrientos-Gutiérrez, Tonatiuh; Villalpando, Salvador; Hernández-Ávila, Mauricio

2015-01-01

Background The quality of diabetes care remains suboptimal according to numerous studies assessing the achievement of quality indicators for diabetes care in various healthcare settings. We report about global and specific quality indicators for diabetes care and their association to glycemic control at the population level in two national health surveys in Mexico. Methods We conducted a cross-sectional analysis of the 2006 and 2012 National Health Surveys in Mexico. We examined quality of care for 2,965 and 4,483 adults (≥ 20 years) with diagnosed type 2 diabetes using fourteen simple and two composite indicators derived from self-reported information. In a subsample for both surveys, glycated hemoglobin (HbA1c) was measured at the time of the interview. We obtained survey weight-adjusted estimators using multiple regression models (logistic and linear) with combined data files, including survey year as covariate to assess change. Results Global quality of care in 2012 was 40.8%, with a relative improvement of 11.7% between 2006 and 2012. Detections of cardiovascular disease risk factors (dyslipidemia and hypertension) were the indicators with the highest improvement, while non-pharmaceutical treatment and diabetic foot exams showed minor changes. We found a significant association between the quality of the process of diabetes care and glycemic control (OR 2.53, 95% CI 1.63-3.94). Age more than 65 years old, the type of health subsystem, gender (males), and high socio-economic status were also significantly associated to glycemic control. Conclusions Quality diabetes care and glycemic control improved and are significantly associated. However, according to international standards, the current situation remains suboptimal. A more holistic approach is needed, with an emphasis on improving quality in outpatient care. PMID:26230991

Quality of Diabetes Care: The Challenges of an Increasing Epidemic in Mexico. Results from Two National Health Surveys (2006 and 2012).

PubMed

Flores-Hernández, Sergio; Saturno-Hernández, Pedro J; Reyes-Morales, Hortensia; Barrientos-Gutiérrez, Tonatiuh; Villalpando, Salvador; Hernández-Ávila, Mauricio

2015-01-01

The quality of diabetes care remains suboptimal according to numerous studies assessing the achievement of quality indicators for diabetes care in various healthcare settings. We report about global and specific quality indicators for diabetes care and their association to glycemic control at the population level in two national health surveys in Mexico. We conducted a cross-sectional analysis of the 2006 and 2012 National Health Surveys in Mexico. We examined quality of care for 2,965 and 4,483 adults (≥ 20 years) with diagnosed type 2 diabetes using fourteen simple and two composite indicators derived from self-reported information. In a subsample for both surveys, glycated hemoglobin (HbA1c) was measured at the time of the interview. We obtained survey weight-adjusted estimators using multiple regression models (logistic and linear) with combined data files, including survey year as covariate to assess change. Global quality of care in 2012 was 40.8%, with a relative improvement of 11.7% between 2006 and 2012. Detections of cardiovascular disease risk factors (dyslipidemia and hypertension) were the indicators with the highest improvement, while non-pharmaceutical treatment and diabetic foot exams showed minor changes. We found a significant association between the quality of the process of diabetes care and glycemic control (OR 2.53, 95% CI 1.63-3.94). Age more than 65 years old, the type of health subsystem, gender (males), and high socio-economic status were also significantly associated to glycemic control. Quality diabetes care and glycemic control improved and are significantly associated. However, according to international standards, the current situation remains suboptimal. A more holistic approach is needed, with an emphasis on improving quality in outpatient care.

“A manager in the minds of doctors:” a comparison of new modes of control in European hospitals

PubMed Central

2013-01-01

Background Hospital governance increasingly combines management and professional self-governance. This article maps the new emergent modes of control in a comparative perspective and aims to better understand the relationship between medicine and management as hybrid and context-dependent. Theoretically, we critically review approaches into the managerialism-professionalism relationship; methodologically, we expand cross-country comparison towards the meso-level of organisations; and empirically, the focus is on processes and actors in a range of European hospitals. Methods The research is explorative and was carried out as part of the FP7 COST action IS0903 Medicine and Management, Working Group 2. Comprising seven European countries, the focus is on doctors and public hospitals. We use a comparative case study design that primarily draws on expert information and document analysis as well as other secondary sources. Results The findings reveal that managerial control is not simply an external force but increasingly integrated in medical professionalism. These processes of change are relevant in all countries but shaped by organisational settings, and therefore create different patterns of control: (1) ‘integrated’ control with high levels of coordination and coherent patterns for cost and quality controls; (2) ‘partly integrated’ control with diversity of coordination on hospital and department level and between cost and quality controls; and (3) ‘fragmented’ control with limited coordination and gaps between quality control more strongly dominated by medicine, and cost control by management. Conclusions Our comparison highlights how organisations matter and brings the crucial relevance of ‘coordination’ of medicine and management across the levels (hospital/department) and the substance (cost/quality-safety) of control into perspective. Consequently, coordination may serve as a taxonomy of emergent modes of control, thus bringing new directions for cost-efficient and quality-effective hospital governance into perspective. PMID:23819578

Volume and methodological quality of randomized controlled trials in laparoscopic surgery: assessment over a 10-year period.

PubMed

Antoniou, Stavros A; Andreou, Alexandros; Antoniou, George A; Koch, Oliver O; Köhler, Gernot; Luketina, Ruzica-R; Bertsias, Antonios; Pointner, Rudolph; Granderath, Frank-Alexander

2015-11-01

Measures have been taken to improve methodological quality of randomized controlled trials (RCTs). This review systematically assessed the trends in volume and methodological quality of RCTs on minimally invasive surgery within a 10-year period. RCTs on minimally invasive surgery were searched in the 10 most cited general surgical journals and the 5 most cited journals of laparoscopic interest for the years 2002 and 2012. Bibliometric and methodological quality components were abstracted using the Scottish Intercollegiate Guidelines Network. The pooled number of RCTs from low-contribution regions demonstrated an increasing proportion of the total published RCTs, compensating for a concomitant decrease of the respective contributions from Europe and North America. International collaborations were more frequent in 2012. Acceptable or high quality RCTs accounted for 37.9% and 54.4% of RCTs published in 2002 and 2012, respectively. Components of external validity were poorly reported. Both the volume and the reporting quality of laparoscopic RCTs have increased from 2002 to 2012, but there seems to be ample room for improvement of methodological quality. Copyright © 2015 Elsevier Inc. All rights reserved.

MS-based monitoring of proteolytic decay of synthetic reporter peptides for quality control of plasma and serum specimens.

PubMed

Findeisen, Peter; Thumfart, Jörg Oliver; Costina, Victor; Hofheinz, Ralf; Neumaier, Michael

2013-09-01

To determine the preanalytical quality of serum and plasma by monitoring the time-dependent ex vivo decay of a synthetic reporter peptide (RP) with liquid chromatography/mass spectrometry (LC/MS). Serum and plasma specimens were spiked with the RP and proteolytic fragments were monitored with LC/MS at different preanalytical time points ranging from 2 to 24 hours after blood withdrawal. The concentration of fragments changed in a time-dependent manner, and respective peptide profiles were used to classify specimens according to their preanalytical time span. Classification accuracy was high, with values always above 0.89 for areas under receiver operating characteristic curves. This "proteomics degradation clock" can be used to estimate the preanalytical quality of serum and plasma and might have impact on quality control procedures of biobanking repositories.

Modeling of liquid flow in surface discontinuities

NASA Astrophysics Data System (ADS)

Lobanova, I. S.; Meshcheryakov, V. A.; Kalinichenko, A. N.

2018-01-01

Polymer composite and metallic materials have found wide application in various industries such as aviation, rocket, car manufacturing, ship manufacturing, etc. Many design elements need permanent quality control. Ensuring high quality and reliability of products is impossible without effective nondestructive testing methods. One of these methods is penetrant testing using penetrating substances based on liquid penetration into defect cavities. In this paper, we propose a model of liquid flow to determine the rates of filling the defect cavities with various materials and, based on this, to choose optimal control modes.

Study quality on groin injury management remains low: a systematic review on treatment of groin pain in athletes

PubMed Central

Serner, Andreas; van Eijck, Casper H; Beumer, Berend R; Hölmich, Per; Weir, Adam; de Vos, Robert-Jan

2015-01-01

Background Groin pain in athletes is frequent and many different treatment options have been proposed. The current level of evidence for the efficacy of these treatments is unknown. Objective Systematically review the literature on the efficacy of treatments for groin pain in athletes. Methods Nine medical databases were searched in May 2014. Inclusion criteria: treatment studies in athletes with groin pain; randomised controlled trials, controlled clinical trials or case series; n>10; outcome measures describing number of recovered athletes, patient satisfaction, pain scores or functional outcome scores. One author screened search results, and two authors independently assessed study quality. A best evidence synthesis was performed. Relationships between quality score and outcomes were evaluated. Review registration number CRD42014010262. Results 72 studies were included for quality analysis. Four studies were high quality. There is moderate evidence that, for adductor-related groin pain, active exercises compared with passive treatments improve success, multimodal treatment with a manual therapy technique shortens the time to return to sports compared with active exercises and adductor tenotomy improves treatment success over time. There is moderate evidence that for athletes with sportsman's hernia, surgery results in better treatment success then conservative treatment. There was a moderate and inverse correlation between study quality and treatment success (p<0.001, r=−0.41), but not between study quality and publication year (p=0.09, r=0.20). Conclusions Only 6% of publications were high quality. Low-quality studies showed significantly higher treatment success and study quality has not improved since 1985. There is moderate evidence for the efficacy of conservative treatment (active exercises and multimodal treatments) and for surgery in patients with adductor-related groin pain. There is moderate evidence for efficacy of surgical treatment in sportsman's hernia. PMID:25633830

Quality of randomized controlled trials published in the International Urogynecology Journal 2007-2016.

PubMed

Kim, Kyu Shik; Chung, Jae Hoon; Jo, Jung Ki; Kim, Jae Heon; Kim, Seungjun; Cho, Jeoung Man; Cho, Hee Ju; Choi, Hong Yong; Lee, Seung Wook

2018-07-01

Randomized controlled trials (RCTs) provide the best quality clinical evidence. The aim of this study was to assess the quality of RCTs published by the International Urogynecology Journal (IUJ) in 2007-2016. RCTs in original articles were extracted from PubMed and IUJ homepage. Change in RCT quality over time was assessed with Jadad and van Tulder scales and Cochrane Collaboration's risk of bias tool (CCRBT). Jadad scores of 3-5 or van Tulder scores of >5 indicated high-quality RCTs. The effect on RCT quality of including funding source and institutional review board (IRB) approval statements and describing the intervention was assessed. In addition, changes in RCT topics over time were assessed. Annual RCT frequencies did not change significantly (6.7-15.7%): 36.1% and 25.7% described blinding and allocation concealment, respectively. Both tended to increase between 2013 and 2016, particularly 2013 and 2014. Funding statement inclusion (39.1% overall) and intervention description (78.2% overall) tended to increase steadily. IRB statement inclusion (60.4% overall) increased significantly (p < 0.01). Jadad scores and van Tulder rose significantly until 2014 (p < 0.01). Frequencies of high-quality RCTs tended to rise. CCRBT indicated that RCTs with a low risk of bias tended to increase until 2014. However, from 2015, Jadad scores, van Tulder, and CCRBT the low risk tended to decreased. RCTs with funding and IRB approval statements had higher Jadad and van Tulder scores than unfunded RCTs (p < 0.01 and p < 0.01, respectively). Intervention description did not associate with better quality. RCT quality improved over time, but a dip in quality was observed in 2015-2016 because of decreased blinding and allocation concealment.

Academic and Administrative Audit: A Parameter of Quality Education

ERIC Educational Resources Information Center

Nitonde, Rohidas; Jadhav, B. U.

2015-01-01

Academic and Administrative Audit (AAA) is a system to control and maintain high standards in the field of Higher Education. It is playing vital role in providing quality education to the learners all over the world. In addition to the developed countries, even the developing as well as underdeveloped countries, are now-a-days coming forward in…

76 FR 2947 - Notice of Final Federal Agency Actions on Proposed Highway in California

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-18

...) from State Route 52 (SR-52) to La Jolla Village Drive. Two high occupancy vehicle (HOV) lanes (one in each direction) from La Jolla Village Drive to just north of Mira Mesa Boulevard (Blvd). The project.... Pending Federal actions include: 401 Water Quality Certification from the Regional Water Quality Control...

Adaptive prospective ECG-triggered sequence coronary angiography in dual-source CT without heart rate control: Image quality and diagnostic performance.

PubMed

Pan, Chang-Jie; Qian, Nong; Wang, Tao; Tang, Xiao-Qiang; Xue, Yue-Jun

2013-02-01

The aim of this study was to evaluate the accuracy of using second generation dual-source CT (DSCT) to obtain high quality images and diagnostic performance and to reduce the radiation dose in adaptive prospective electrocardiography (ECG)-triggered sequence (CorAdSeq) CT coronary angiography (CTCA) without heart rate control. No prescan β-blockers were administered. Un-enhanced CT and CTCA with adaptive prospective CorAdSeq scanning without heart rate control were performed in 683 consecutive patients divided into two body mass index (BMI) groups: BMI <25 kg/m(2) (group A, n=412) and BMI ≥25 kg/m(2) (group B, n=271). The image quality and quantitative stenosis of all coronary segments with a diameter ≥1 mm were assessed. The mean heart rate (MHR), heart rate variability (HRV) and radiation dose values were recorded. In 426 cases, the diagnostic performance was evaluated using quantitative conventional coronary angiography as the reference standard. Diagnostic image quality was obtained in 98.5% of segments in group A and in 98.8% of segments in group B, with no significant differences between the groups. No correlations were observed between the image quality score and MHR or HRV (P=0.492, P=0.564, respectively). The effective radiation doses in groups A and B were 2.57±1.01 mSv and 6.36±1.88 mSv, respectively. The sensitivities and specificities of diagnosing coronary heart disease per patient were 99.6% and 97.8% in group A and 99.5% and 97.5% in group B, respectively (P>0.05). Adaptive prospective CorAdSeq scanning, without heart rate control, by second generation DSCT had a high image quality and diagnostic performance for coronary artery stenosis with lower radiation doses.

Design of modular control system for grain dryers

NASA Astrophysics Data System (ADS)

He, Gaoqing; Liu, Yanhua; Zu, Yuan

In order to effectively control the temperature of grain drying bin, grain ,air outlet as well as the grain moisture, it designed the control system of 5HCY-35 which is based on MCU to adapt to all grains drying conditions, high drying efficiency, long life usage and less manually. The system includes: the control module of the constant temperature and the temperature difference control in drying bin, the constant temperature control of heating furnace, on-line testing of moisture, variety of grain-circulation speed control and human-computer interaction interface. Spatial curve simulation, which takes moisture as control objectives, controls the constant temperature and the temperature difference in drying bin according to preset parameter by the user or a list to reduce the grains explosive to ensure the seed germination percentage. The system can realize the intelligent control of high efficiency and various drying, the good scalability and the high quality.

Physician-Delivered Injection Therapies for Mechanical Neck Disorders: A Systematic Review Update (Non-Oral, Non-Intravenous Pharmacological Interventions for Neck Pain)

PubMed Central

Gross, Anita R.; Peloso, Paul M.; Galway, Erin; Navasero, Neenah; Essen, Karis Van; Graham, Nadine; Goldsmith, Charlie H; Gzeer, Wisam; Shi, Qiyun; Haines, Ted and COG

2013-01-01

Background: Controversy persists regarding medicinal injections for mechanical neck disorders (MNDs). Objectives: To determine the effectiveness of physician-delivered injections on pain, function/disability, quality of life, global perceived effect and patient satisfaction for adults with MNDs. Search Methods: We updated our previous searches of CENTRAL, MEDLINE and EMBASE from December 2006 through to March 2012. Selection Criteria: We included randomized controlled trials of adults with neck disorders treated by physician-delivered injection therapies. Data Collection and Analysis: Two authors independently selected articles, abstracted data and assessed methodological quality. When clinical heterogeneity was absent, we combined studies using random-effects models. Results: We included 12 trials (667 participants). No high or moderate quality studies were found with evidence of benefit over control. Moderate quality evidence suggests little or no difference in pain or function/disability between nerve block injection of steroid and bupivacaine vs bupivacaine alone at short, intermediate and long-term for chronic neck pain. We found limited very low quality evidence of an effect on pain with intramuscular lidocaine vs control for chronic myofascial neck pain. Two low quality studies showed an effect on pain with anaesthetic nerve block vs saline immediately post treatment and in the short-term. All other studies were of low or very low quality with no evidence of benefit over controls. Authors' Conclusions: Current evidence does not confirm the effectiveness of IM-lidocaine injection for chronic mechanical neck pain nor anaesthetic nerve block for cervicogenic headache. There is moderate evidence of no benefit for steroid blocks vs controls for mechanical neck pain. PMID:24155806

Association mapping reveals the genetic architecture of tomato response to water deficit: focus on major fruit quality traits.

PubMed

Albert, Elise; Segura, Vincent; Gricourt, Justine; Bonnefoi, Julien; Derivot, Laurent; Causse, Mathilde

2016-12-01

Water scarcity constitutes a crucial constraint for agriculture productivity. High-throughput approaches in model plant species identified hundreds of genes potentially involved in survival under drought, but few having beneficial effects on quality and yield. Nonetheless, controlled water deficit may improve fruit quality through higher concentration of flavor compounds. The underlying genetic determinants are still poorly known. In this study, we phenotyped 141 highly diverse small fruit tomato accessions for 27 traits under two contrasting watering conditions. A subset of 55 accessions exhibited increased metabolite contents and maintained yield under water deficit. Using 6100 single nucleotide polymorphisms (SNPs), association mapping revealed 31, 41, and 44 quantitative trait loci (QTLs) under drought, control, and both conditions, respectively. Twenty-five additional QTLs were interactive between conditions, emphasizing the interest in accounting for QTLs by watering regime interactions in fruit quality improvement. Combining our results with the loci previously identified in a biparental progeny resulted in 11 common QTLs and contributed to a first detailed characterization of the genetic determinants of response to water deficit in tomato. Major QTLs for fruit quality traits were dissected and candidate genes were proposed using expression and polymorphism data. The outcomes provide a basis for fruit quality improvement under deficit irrigation while limiting yield losses. © The Author 2016. Published by Oxford University Press on behalf of the Society for Experimental Biology.

Temporomandibular disorders in growing patients after treatment of class II and III malocclusion with orthopaedic appliances: a systematic review.

PubMed

Jiménez-Silva, Antonio; Carnevali-Arellano, Romano; Venegas-Aguilera, Matías; Tobar-Reyes, Julio; Palomino-Montenegro, Hernán

2018-05-01

To determine if the use of orthopaedic appliances in growing patients applied to correct Class II and III malocclusion is related to the development of temporomandibular disorders (TMD). A systematic review was conducted between 1960 and July 2017, based on electronic databases: PubMed, Cochrane Library, Embase, Medline, Scopus, EBSCOhost, Scielo, Lilacs and Bireme. Controlled clinical trials (CCTs) and randomized controlled trials (RCTs) were identified. The articles were selected and analyzed by two authors independently. The quality of the evidence was determined according to the guidelines of the Cochrane Risk Bias Assessment Tool and the Cochrane Quality Study Guide. Seven articles were included, four CCTs and three RCTs. The studies were grouped according to malocclusion treatment in (a) class II appliances (n = 4) and (b) class III appliances (n = 3). The quality of evidence was low due to the high risk of bias, independent of the association reported. All studies concluded that the use of orthopaedic appliances would not contribute to the development of TMD. The quality of evidence available is insufficient to establish definitive conclusions, since the studies were very heterogeneous and presented a high risk of bias. However, it is suggested that the use of orthopaedic appliances to correct class II and III malocclusion in growing patients would not be considered as a risk factor for the development of TMD. High-quality RCTs are required to draw any definitive conclusions.

Impact of a pharmacist-led warfarin self-management program on quality of life and anticoagulation control: a randomized trial.

PubMed

Verret, Lucie; Couturier, Justine; Rozon, Andréanne; Saudrais-Janecek, Sarah; St-Onge, Amélie; Nguyen, Angela; Basmadjian, Arsène; Tremblay, Simon; Brouillette, Denis; de Denus, Simon

2012-10-01

To evaluate the impact of a pharmacist-led warfarin patient self-management program on quality of life and anticoagulation control compared with management in a physician-led specialized anticoagulation clinic. Prospective, randomized, controlled, open-label trial. Tertiary care academic medical center. A total of 114 patients aged 18-75 years who were followed at a specialized anticoagulation clinic, had received warfarin for at least 6 months, and were expected to continue warfarin for a minimum of 4 months. All patients attended an educational session on anticoagulation provided by a pharmacist. Patients randomized to the self-management group (58 patients) also received practical training to use the CoaguChek XS device and a self-management dosing algorithm. Patients in the control group (56 patients) continued to undergo standard management at the anticoagulation clinic. Patients completed a validated quality-of-life questionnaire and the validated Oral Anticoagulation Knowledge test at the beginning and end of the study. The quality of anticoagulation control was evaluated by using the time spent in therapeutic range. After 4 months of follow-up, a significant improvement in the self-management group was observed compared with the control group in four of the five quality-of-life topics (p<0.05). Improvements in knowledge were observed in both groups after the training session and persisted after 4 months (p<0.05 for all). The time spent in the therapeutic range (80.0% in the self-management group vs 75% in the control group, p=0.79) and in the extended therapeutic range ([target international normalized ratio ± 0.3] 93.2% in the self-management group vs 91.1% in the control group, p=0.30) were similar between groups. A self-management warfarin program led by pharmacists resulted in significant improvement in the quality of life of patients receiving warfarin therapy as well as a reduction in the time required for anticoagulation monitoring, while maintaining a level of anticoagulation control similar to a high-quality specialized anticoagulation clinic. © 2012 Pharmacotherapy Publications, Inc.

Standard Reference Specimens in Quality Control of Engineering Surfaces

PubMed Central

Song, J. F.; Vorburger, T. V.

1991-01-01

In the quality control of engineering surfaces, we aim to understand and maintain a good relationship between the manufacturing process and surface function. This is achieved by controlling the surface texture. The control process involves: 1) learning the functional parameters and their control values through controlled experiments or through a long history of production and use; 2) maintaining high accuracy and reproducibility with measurements not only of roughness calibration specimens but also of real engineering parts. In this paper, the characteristics, utilizations, and limitations of different classes of precision roughness calibration specimens are described. A measuring procedure of engineering surfaces, based on the calibration procedure of roughness specimens at NIST, is proposed. This procedure involves utilization of check specimens with waveform, wavelength, and other roughness parameters similar to functioning engineering surfaces. These check specimens would be certified under standardized reference measuring conditions, or by a reference instrument, and could be used for overall checking of the measuring procedure and for maintaining accuracy and agreement in engineering surface measurement. The concept of “surface texture design” is also suggested, which involves designing the engineering surface texture, the manufacturing process, and the quality control procedure to meet the optimal functional needs. PMID:28184115

Identification of long-term trends and seasonality in high-frequency water quality data from the Yangtze River basin, China.

PubMed

Duan, Weili; He, Bin; Chen, Yaning; Zou, Shan; Wang, Yi; Nover, Daniel; Chen, Wen; Yang, Guishan

2018-01-01

Comprehensive understanding of the long-term trends and seasonality of water quality is important for controlling water pollution. This study focuses on spatio-temporal distributions, long-term trends, and seasonality of water quality in the Yangtze River basin using a combination of the seasonal Mann-Kendall test and time-series decomposition. The used weekly water quality data were from 17 environmental stations for the period January 2004 to December 2015. Results show gradual improvement in water quality during this period in the Yangtze River basin and greater improvement in the Uppermost Yangtze River basin. The larger cities, with high GDP and population density, experienced relatively higher pollution levels due to discharge of industrial and household wastewater. There are higher pollution levels in Xiang and Gan River basins, as indicated by higher NH4-N and CODMn concentrations measured at the stations within these basins. Significant trends in water quality were identified for the 2004-2015 period. Operations of the three Gorges Reservoir (TGR) enhanced pH fluctuations and possibly attenuated CODMn, and NH4-N transportation. Finally, seasonal cycles of varying strength were detected for time-series of pollutants in river discharge. Seasonal patterns in pH indicate that maxima appear in winter, and minima in summer, with the opposite true for CODMn. Accurate understanding of long-term trends and seasonality are necessary goals of water quality monitoring system efforts and the analysis methods described here provide essential information for effectively controlling water pollution.

40 CFR 81.112 - Charleston Intrastate Air Quality Control Region.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Quality Control Regions § 81.112 Charleston Intrastate Air Quality Control Region. The Charleston Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... Quality Control Region: Region 1. 81.107Greenwood Intrastate Air Quality Control Region: Region 2. 81...

40 CFR 81.112 - Charleston Intrastate Air Quality Control Region.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Quality Control Regions § 81.112 Charleston Intrastate Air Quality Control Region. The Charleston Intrastate Air Quality Control Region (South Carolina) consists of the territorial area encompassed by the... Quality Control Region: Region 1. 81.107Greenwood Intrastate Air Quality Control Region: Region 2. 81...

Improved GMP-compliant multi-dose production and quality control of 6-[18F]fluoro-L-DOPA.

PubMed

Luurtsema, G; Boersma, H H; Schepers, M; de Vries, A M T; Maas, B; Zijlma, R; de Vries, E F J; Elsinga, P H

2017-01-01

6-[ 18 F]Fluoro-L-3,4-dihydroxyphenylalanine (FDOPA) is a frequently used radiopharmaceutical for detecting neuroendocrine and brain tumors and for the differential diagnosis of Parkinson's disease. To meet the demand for FDOPA, a high-yield GMP-compliant production method is required. Therefore, this study aimed to improve the FDOPA production and quality control procedures to enable distribution of the radiopharmaceutical over distances.FDOPA was prepared by electrophilic fluorination of the trimethylstannyl precursor with [ 18 F]F 2 , produced from [ 18 O] 2 via the double-shoot approach, leading to FDOPA with higher specific activity as compared to FDOPA which was synthesized, using [ 18 F]F 2 produced from 20 Ne, leading to FDOPA with a lower specific activity. The quality control of the product was performed using a validated UPLC system and compared with quality control with a conventional HPLC system. Impurities were identified using UPLC-MS. The [ 18 O] 2 double-shoot radionuclide production method yielded significantly more [ 18 F]F 2 with less carrier F 2 than the conventional method starting from 20 Ne. After adjustment of radiolabeling parameters substantially higher amounts of FDOPA with higher specific activity could be obtained. Quality control by UPLC was much faster and detected more side-products than HPLC. UPLC-MS showed that the most important side-product was FDOPA-quinone, rather than 6-hydroxydopa as suggested by the European Pharmacopoeia. The production and quality control of FDOPA were significantly improved by introducing the [ 18 O] 2 double-shoot radionuclide production method, and product analysis by UPLC, respectively. As a result, FDOPA is now routinely available for clinical practice and for distribution over distances.

A Reproducible Approach of Preparing High-Quality Overdoped Bi 2 Sr 2 CaCu 2 O 8+δ Single Crystals by Oxygen Annealing and Quenching Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yu-Xiao; Zhao, Lin; Gu, Gen-Da

2016-06-01

Here, we report a reproducible approach in preparing high-quality overdoped Bi 2Sr 2 CaCu 2 O 8+δ (Bi2212) single crystals by annealing Bi2212 crystals in high oxygen pressure followed by a fast quenching. High-quality overdoped and heavily overdoped Bi2212 single crystals are obtained by controlling the annealing oxygen pressure. Furthermore, we find that, beyond a limit of oxygen pressure that can achieve most heavily overdoped Bi2212 with a T c ~63 K, the annealed Bi2212 begins to decompose. This accounts for the existence of the hole-doping limit and thus the T c limit in the heavily overdoped region of Bi2212more » by the oxygen annealing process. Our results provide a reliable way in preparing high-quality overdoped and heavily overdoped Bi2212 crystals that are important for studies of the physical properties, electronic structure and superconductivity mechanism of the cuprate superconductors.« less

Glomerular disease: why is there a dearth of high quality clinical trials?

PubMed

Leaf, David E; Appel, Gerald B; Radhakrishnan, Jai

2010-08-01

There is a paucity of high quality clinical trials in glomerular disease, particularly in non-diabetic kidney disease. The aims of this review include quantifying the extent of this problem and exploring reasons for the scarcity of such trials in primary glomerular disease, with an emphasis on immunoglobulin A nephropathy, minimal change disease, focal segmental glomerulosclerosis, and membranous nephropathy in comparison with the more common diseases of diabetic nephropathy and lupus nephritis. Reasons for the dearth of high quality clinical trials in primary glomerular disease include (1) low prevalence of disease; (2) variability in clinical presentation; (3) variability in treatment response; (4) lack of consensus in definitions; (5) difficulty in recruiting patients; (6) high costs of randomized controlled trials; and (7) lack of collaborative efforts. To facilitate greater numbers of high quality clinical trials in glomerular disease, practice guidelines should establish common classification systems of disease and common clinical end points, industry and non-industry sponsored research should find common ground and work together toward advancing science, and national registries should be created to encourage collaborations across institutions and across nations.

Machiavellianism, Relationship Satisfaction, and Romantic Relationship Quality

PubMed Central

Brewer, Gayle; Abell, Loren

2017-01-01

Machiavellianism is characterised by a manipulative interpersonal style, willingness to exploit others, and a preference for emotionally detached relationships. The present studies investigate the extent to which Machiavellianism influences relationship satisfaction and romantic relationship quality. In Study 1, 194 heterosexual partnered women completed Machiavellianism and Relationship Satisfaction measures. Women with higher levels of Machiavellianism reported lower levels of relationship satisfaction. In Study 2, 132 heterosexual partnered women completed Machiavellianism, Trust, Commitment, Control, and Emotional Abuse scales. Women with higher levels of Machiavellianism perceived their partners to be less dependable, reported less faith in their partners, and were less willing to persist with the relationship than those with low levels of Machiavellianism. With regards to negative behavior, Machiavellianism predicted each form of control and emotional abuse investigated, such that those with high levels of Machiavellianism were more likely to engage in controlling behavior and emotional abuse. Findings have important implications for the prediction of romantic relationship quality and in particular for negative behavior such as control and abuse. PMID:28904597

Machiavellianism, Relationship Satisfaction, and Romantic Relationship Quality.

PubMed

Brewer, Gayle; Abell, Loren

2017-08-01

Machiavellianism is characterised by a manipulative interpersonal style, willingness to exploit others, and a preference for emotionally detached relationships. The present studies investigate the extent to which Machiavellianism influences relationship satisfaction and romantic relationship quality. In Study 1, 194 heterosexual partnered women completed Machiavellianism and Relationship Satisfaction measures. Women with higher levels of Machiavellianism reported lower levels of relationship satisfaction. In Study 2, 132 heterosexual partnered women completed Machiavellianism, Trust, Commitment, Control, and Emotional Abuse scales. Women with higher levels of Machiavellianism perceived their partners to be less dependable, reported less faith in their partners, and were less willing to persist with the relationship than those with low levels of Machiavellianism. With regards to negative behavior, Machiavellianism predicted each form of control and emotional abuse investigated, such that those with high levels of Machiavellianism were more likely to engage in controlling behavior and emotional abuse. Findings have important implications for the prediction of romantic relationship quality and in particular for negative behavior such as control and abuse.

The health impacts of women's low control in their living environment: A theory-based systematic review of observational studies in societies with profound gender discrimination.

PubMed

Pennington, Andy; Orton, Lois; Nayak, Shilpa; Ring, Adele; Petticrew, Mark; Sowden, Amanda; White, Martin; Whitehead, Margaret

2018-05-01

We conducted a systematic review of observational evidence on the health impacts of women's low control/autonomy in the living environment in societies with profound gender discrimination and gender bias. Thirty observational studies of varying methodological quality were included. Overall, the evidence suggests that women's lower control or autonomy (for example lack of freedom of movement outside the home, lack of authority to access healthcare for sick children) was associated with poorer mental and physical health for women and higher morbidity and mortality for their children, after adjusting for their socioeconomic circumstances. Further studies are needed to disentangle and understand the pathways between low control and health outcomes in contexts of profound gender discrimination. This systematic review has highlighted the general low quality of the evidence base on this research question. It identifies the pressing need for high quality, longitudinal studies in the future. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

IDMA-Based MAC Protocol for Satellite Networks with Consideration on Channel Quality

PubMed Central

2014-01-01

In order to overcome the shortcomings of existing medium access control (MAC) protocols based on TDMA or CDMA in satellite networks, interleave division multiple access (IDMA) technique is introduced into satellite communication networks. Therefore, a novel wide-band IDMA MAC protocol based on channel quality is proposed in this paper, consisting of a dynamic power allocation algorithm, a rate adaptation algorithm, and a call admission control (CAC) scheme. Firstly, the power allocation algorithm combining the technique of IDMA SINR-evolution and channel quality prediction is developed to guarantee high power efficiency even in terrible channel conditions. Secondly, the effective rate adaptation algorithm, based on accurate channel information per timeslot and by the means of rate degradation, can be realized. What is more, based on channel quality prediction, the CAC scheme, combining the new power allocation algorithm, rate scheduling, and buffering strategies together, is proposed for the emerging IDMA systems, which can support a variety of traffic types, and offering quality of service (QoS) requirements corresponding to different priority levels. Simulation results show that the new wide-band IDMA MAC protocol can make accurate estimation of available resource considering the effect of multiuser detection (MUD) and QoS requirements of multimedia traffic, leading to low outage probability as well as high overall system throughput. PMID:25126592

[Quality management (TQM) in public health-care (PHC): principles for cost-performance calculations and cost reductions with better quality].

PubMed

Bergholz, W

2008-11-01

In many high-tech industries, quality management (QM) has enabled improvements of quality by a factor of 100 or more, in combination with significant cost reductions. Compared to this, the application of QM methods in health care is in its initial stages. It is anticipated that stringent process management, embedded in an effective QM system will lead to significant improvements in health care in general and in the German public health service in particular. Process management is an ideal platform for controlling in the health care sector, and it will significantly improve the leverage of controlling to bring down costs. Best practice sharing in industry has led to quantum leap improvements. Process management will enable best practice sharing also in the public health service, in spite of the highly diverse portfolio of services that the public health service offers in different German regions. Finally, it is emphasised that "technical" QM, e.g., on the basis of the ISO 9001 standard is not sufficient to reach excellence. It is necessary to integrate soft factors, such as patient or employee satisfaction, and leadership quality into the system. The EFQM model for excellence can serve as proven tool to reach this goal.

Composite-Metal-Matrix Arc-Spray Process

NASA Technical Reports Server (NTRS)

Westfall, Leonard J.

1987-01-01

Arc-spray "monotape" process automated, low in cost, and produces at high rate. Ideal for development of new metal-matrix composites. "Monotape" reproducible and of high quality. Process carried out in controlled gas environment with programmable matrix-deposition rates, resulting in significant cost saving

Qualitative and quantitative analyses of flavonoids in Spirodela polyrrhiza by high-performance liquid chromatography coupled with mass spectrometry.

PubMed

Qiao, Xue; He, Wen-ni; Xiang, Cheng; Han, Jian; Wu, Li-jun; Guo, De-an; Ye, Min

2011-01-01

Spirodela polyrrhiza (L.) Schleid. is a traditional Chinese herbal medicine for the treatment of influenza. Despite its wide use in Chinese medicine, no report on quality control of this herb is available so far. To establish qualitative and quantitative analytical methods by high-performance liquid chromatography (HPLC) coupled with mass spectrometry (MS) for the quality control of S. polyrrhiza. The methanol extract of S. polyrrhiza was analysed by HPLC/ESI-MS(n). Flavonoids were identified by comparing with reference standards or according to their MS(n) (n = 2-4) fragmentation behaviours. Based on LC/MS data, a standardised HPLC fingerprint was established by analysing 15 batches of commercial herbal samples. Furthermore, quantitative analysis was conducted by determining five major flavonoids, namely luteolin 8-C-glucoside, apigenin 8-C-glucoside, luteolin 7-O-glucoside, apigenin 7-O-glucoside and luteolin. A total of 18 flavonoids were identified by LC/MS, and 14 of them were reported from this herb for the first time. The HPLC fingerprints contained 10 common peaks, and could differentiate good quality batches from counterfeits. The total contents of five major flavonoids in S. polyrrhiza varied significantly from 4.28 to 19.87 mg/g. Qualitative LC/MS and quantitative HPLC analytical methods were established for the comprehensive quality control of S. polyrrhiza. Copyright © 2011 John Wiley & Sons, Ltd.

Quality-control issues on high-resolution diagnostic monitors.

PubMed

Parr, L F; Anderson, A L; Glennon, B K; Fetherston, P

2001-06-01

Previous literature indicates a need for more data collection in the area of quality control of high-resolution diagnostic monitors. Throughout acceptance testing, which began in June 2000, stability of monitor calibration was analyzed. Although image quality on all monitors was found to be acceptable upon initial acceptance testing using VeriLUM software by Image Smiths, Inc (Germantown, MD), it was determined to be unacceptable during the clinical phase of acceptance testing. High-resolution monitors were evaluated for quality assurance on a weekly basis from installation through acceptance testing and beyond. During clinical utilization determination (CUD), monitor calibration was identified as a problem and the manufacturer returned and recalibrated all workstations. From that time through final acceptance testing, high-resolution monitor calibration and monitor failure rate remained a problem. The monitor vendor then returned to the site to address these areas. Monitor defocus was still noticeable and calibration checks were increased to three times per week. White and black level drift on medium-resolution monitors had been attributed to raster size settings. Measurements of white and black level at several different size settings were taken to determine the effect of size on white and black level settings. Black level remained steady with size change. White level appeared to increase by 2.0 cd/m2 for every 0.1 inches decrease in horizontal raster size. This was determined not to be the cause of the observed brightness drift. Frequency of calibration/testing is an issue in a clinical environment. The increased frequency required at our site cannot be sustained. The medical physics division cannot provide dedicated personnel to conduct the quality-assurance testing on all monitors at this interval due to other physics commitments throughout the hospital. Monitor access is also an issue due to radiologists' need to read images. Some workstations are in use 7 AM to 11 PM daily. An appropriate monitor calibration frequency must be established during acceptance testing to ensure unacceptable drift is not masked by excessive calibration frequency. Standards for acceptable black level and white level drift also need to be determined. The monitor vendor and hospital staff agree that currently, very small printed text is an acceptable method of determining monitor blur, however, a better method of determining monitor blur is being pursued. Although monitors may show acceptable quality during initial acceptance testing, they need to show sustained quality during the clinical acceptance-testing phase. Defocus, black level, and white level are image quality concerns, which need to be evaluated during the clinical phase of acceptance testing. Image quality deficiencies can have a negative impact on patient care and raise serious medical-legal concerns. The attention to quality control required of the hospital staff needs to be realistic and not have a significant impact on radiology workflow.

40 CFR 81.88 - Billings Intrastate Air Quality Control Region.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Quality Control Regions § 81.88 Billings Intrastate Air Quality Control Region. The Metropolitan Billings Intrastate Air Quality Control Region (Montana) has been renamed the Billings Intrastate Air Quality Control... to by Montana authorities as follows: Sec. 481.168Great Falls Intrastate Air Quality Control Region...

40 CFR 81.88 - Billings Intrastate Air Quality Control Region.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Quality Control Regions § 81.88 Billings Intrastate Air Quality Control Region. The Metropolitan Billings Intrastate Air Quality Control Region (Montana) has been renamed the Billings Intrastate Air Quality Control... to by Montana authorities as follows: Sec. 481.168Great Falls Intrastate Air Quality Control Region...

Measuring the quality of therapeutic apheresis care in the pediatric intensive care unit.

PubMed

Sussmane, Jeffrey B; Torbati, Dan; Gitlow, Howard S

2012-01-01

Our goal was to measure the quality of care provided in the Pediatric Intensive Care Unit (PICU) during Therapeutic Apheresis (TA). We described the care as a step by step process. We designed a flow chart to carefully document each step of the process. We then defined each step with a unique clinical indictor (CI) that represented the exact task we felt provided quality care. These CIs were studied and modified for 1 year. We measured our performance in this process by the number of times we accomplished the CI vs. the total number of CIs that were to be performed. The degree of compliance, with these clinical indicators, was analyzed and used as a metric for quality by calculating how close the process is running exactly as planned or "in control." The Apheresis Process was in control (compliance) for 47% of the indicators, as measured in the aggregate for the first observational year. We then applied the theory of Total Quality Management (TQM) through our Design, Measure, Analyze, Improve, and Control (DMAIC) model. We were able to improve the process and bring it into control by increasing the compliance to > 99.74%, in the aggregate, for the third and fourth quarter of the second year. We have implemented TQM to increase compliance, thus control, of a highly complex and multidisciplinary Pediatric Intensive Care therapy. We have shown a reproducible and scalable measure of quality for a complex clinical process in the PICU, without additional capital expenditure. Copyright © 2011 Wiley-Liss, Inc.

Low-Quality Housing Is Associated With Increased Risk of Malaria Infection: A National Population-Based Study From the Low Transmission Setting of Swaziland

PubMed Central

Dlamini, Nomcebo; Ntshalintshali, Nyasatu; Pindolia, Deepa; Allen, Regan; Nhlabathi, Nomcebo; Novotny, Joseph; Kang Dufour, Mi-Suk; Midekisa, Alemayehu; Gosling, Roly; LeMenach, Arnaud; Cohen, Justin; Dorsey, Grant; Greenhouse, Bryan; Kunene, Simon

2017-01-01

Abstract Background. Low-quality housing may confer risk of malaria infection, but evidence in low transmission settings is limited. Methods. To examine the relationship between individual level housing quality and locally acquired infection in children and adults, a population-based cross-sectional analysis was performed using existing surveillance data from the low transmission setting of Swaziland. From 2012 to 2015, cases were identified through standard diagnostics in health facilities and by loop-mediated isothermal amplification in active surveillance, with uninfected subjects being household members and neighbors. Housing was visually assessed in a home visit and then classified as low, high, or medium quality, based on housing components being traditional, modern, or both, respectively. Results. Overall, 11426 individuals were included in the study: 10960 uninfected and 466 infected (301 symptomatic and 165 asymptomatic). Six percent resided in low-quality houses, 26% in medium-quality houses, and 68% in high-quality houses. In adjusted models, low- and medium-quality construction was associated with increased risk of malaria compared with high-quality construction (adjusted odds ratio [AOR], 2.11 and 95% confidence interval [CI], 1.26–3.53 for low vs high; AOR, 1.56 and 95% CI, 1.15–2.11 for medium vs high). The relationship was independent of vector control, which also conferred a protective effect (AOR, 0.67; 95% CI, .50–.90) for sleeping under an insecticide-treated bed net or a sprayed structure compared with neither. Conclusions. Our study adds to the limited literature on housing quality and malaria risk from low transmission settings. Housing improvements may offer an attractive and sustainable additional strategy to support countries in malaria elimination. PMID:28580365

Low-Quality Housing Is Associated With Increased Risk of Malaria Infection: A National Population-Based Study From the Low Transmission Setting of Swaziland.

PubMed

Dlamini, Nomcebo; Hsiang, Michelle S; Ntshalintshali, Nyasatu; Pindolia, Deepa; Allen, Regan; Nhlabathi, Nomcebo; Novotny, Joseph; Kang Dufour, Mi-Suk; Midekisa, Alemayehu; Gosling, Roly; LeMenach, Arnaud; Cohen, Justin; Dorsey, Grant; Greenhouse, Bryan; Kunene, Simon

2017-01-01

Low-quality housing may confer risk of malaria infection, but evidence in low transmission settings is limited. To examine the relationship between individual level housing quality and locally acquired infection in children and adults, a population-based cross-sectional analysis was performed using existing surveillance data from the low transmission setting of Swaziland. From 2012 to 2015, cases were identified through standard diagnostics in health facilities and by loop-mediated isothermal amplification in active surveillance, with uninfected subjects being household members and neighbors. Housing was visually assessed in a home visit and then classified as low, high, or medium quality, based on housing components being traditional, modern, or both, respectively. Overall, 11426 individuals were included in the study: 10960 uninfected and 466 infected (301 symptomatic and 165 asymptomatic). Six percent resided in low-quality houses, 26% in medium-quality houses, and 68% in high-quality houses. In adjusted models, low- and medium-quality construction was associated with increased risk of malaria compared with high-quality construction (adjusted odds ratio [AOR], 2.11 and 95% confidence interval [CI], 1.26-3.53 for low vs high; AOR, 1.56 and 95% CI, 1.15-2.11 for medium vs high). The relationship was independent of vector control, which also conferred a protective effect (AOR, 0.67; 95% CI, .50-.90) for sleeping under an insecticide-treated bed net or a sprayed structure compared with neither. Our study adds to the limited literature on housing quality and malaria risk from low transmission settings. Housing improvements may offer an attractive and sustainable additional strategy to support countries in malaria elimination. © The Author 2017. Published by Oxford University Press on behalf of Infectious Diseases Society of America.

Assessment of a novel multi-array normalization method based on spike-in control probes suitable for microRNA datasets with global decreases in expression.

PubMed

Sewer, Alain; Gubian, Sylvain; Kogel, Ulrike; Veljkovic, Emilija; Han, Wanjiang; Hengstermann, Arnd; Peitsch, Manuel C; Hoeng, Julia

2014-05-17

High-quality expression data are required to investigate the biological effects of microRNAs (miRNAs). The goal of this study was, first, to assess the quality of miRNA expression data based on microarray technologies and, second, to consolidate it by applying a novel normalization method. Indeed, because of significant differences in platform designs, miRNA raw data cannot be normalized blindly with standard methods developed for gene expression. This fundamental observation motivated the development of a novel multi-array normalization method based on controllable assumptions, which uses the spike-in control probes to adjust the measured intensities across arrays. Raw expression data were obtained with the Exiqon dual-channel miRCURY LNA™ platform in the "common reference design" and processed as "pseudo-single-channel". They were used to apply several quality metrics based on the coefficient of variation and to test the novel spike-in controls based normalization method. Most of the considerations presented here could be applied to raw data obtained with other platforms. To assess the normalization method, it was compared with 13 other available approaches from both data quality and biological outcome perspectives. The results showed that the novel multi-array normalization method reduced the data variability in the most consistent way. Further, the reliability of the obtained differential expression values was confirmed based on a quantitative reverse transcription-polymerase chain reaction experiment performed for a subset of miRNAs. The results reported here support the applicability of the novel normalization method, in particular to datasets that display global decreases in miRNA expression similarly to the cigarette smoke-exposed mouse lung dataset considered in this study. Quality metrics to assess between-array variability were used to confirm that the novel spike-in controls based normalization method provided high-quality miRNA expression data suitable for reliable downstream analysis. The multi-array miRNA raw data normalization method was implemented in an R software package called ExiMiR and deposited in the Bioconductor repository.

Assessment of a novel multi-array normalization method based on spike-in control probes suitable for microRNA datasets with global decreases in expression

PubMed Central

2014-01-01

Background High-quality expression data are required to investigate the biological effects of microRNAs (miRNAs). The goal of this study was, first, to assess the quality of miRNA expression data based on microarray technologies and, second, to consolidate it by applying a novel normalization method. Indeed, because of significant differences in platform designs, miRNA raw data cannot be normalized blindly with standard methods developed for gene expression. This fundamental observation motivated the development of a novel multi-array normalization method based on controllable assumptions, which uses the spike-in control probes to adjust the measured intensities across arrays. Results Raw expression data were obtained with the Exiqon dual-channel miRCURY LNA™ platform in the “common reference design” and processed as “pseudo-single-channel”. They were used to apply several quality metrics based on the coefficient of variation and to test the novel spike-in controls based normalization method. Most of the considerations presented here could be applied to raw data obtained with other platforms. To assess the normalization method, it was compared with 13 other available approaches from both data quality and biological outcome perspectives. The results showed that the novel multi-array normalization method reduced the data variability in the most consistent way. Further, the reliability of the obtained differential expression values was confirmed based on a quantitative reverse transcription–polymerase chain reaction experiment performed for a subset of miRNAs. The results reported here support the applicability of the novel normalization method, in particular to datasets that display global decreases in miRNA expression similarly to the cigarette smoke-exposed mouse lung dataset considered in this study. Conclusions Quality metrics to assess between-array variability were used to confirm that the novel spike-in controls based normalization method provided high-quality miRNA expression data suitable for reliable downstream analysis. The multi-array miRNA raw data normalization method was implemented in an R software package called ExiMiR and deposited in the Bioconductor repository. PMID:24886675

Particle counter as a tool to control pre-hydrolyzed coagulant dosing and rapid filtration efficiency in a conventional treatment system.

PubMed

Gumińska, Jolanta; Kłos, Marcin

2015-01-01

Filtration efficiency in a conventional water treatment system was analyzed in the context of pre-hydrolyzed coagulant overdosing. Two commercial coagulants of different aluminum speciation were tested. A study was carried out at a water treatment plant supplied with raw water of variable quality. The lack of stability of water quality caused many problems with maintaining the optimal coagulant dose. The achieved results show that the type of coagulant had a very strong influence on the effectiveness of filtration resulting from the application of an improper coagulant dose. The overdosing of high basicity coagulant (PAC85) caused a significant increase of fine particles in the outflow from the sedimentation tanks, which could not be retained in the filter bed due to high surface charge and the small size of hydrolysis products. When using a coagulant of lower basicity (PAC70), it was much easier to control the dose of coagulant and to adjust it to the changing water quality.

Sleep disturbance, psycho-social and medical symptoms—A pilot survey among persons exposed to high levels of road traffic noise

NASA Astrophysics Data System (ADS)

Öhrström, E.

1989-08-01

A pilot survey was undertaken to elucidate sleep quality, as well as psycho-social and medical symptoms and mood, among people who had lived for many years in an area with high levels of road traffic noise during night hours and inhabitants of a quiet control area: 106 personal interviews were performed and specific questionnaires on sleep and mood answered by 63 persons during three consecutive days. It was found that both sleep quality and mood (social orientation, activity, wellbeing and extroversion) were depressed in the noisy area as compared with a control area. Symptoms of tiredness, headache and nervous stomach disorders were more frequent. A significant relationship between sensitivity to noise and sleep quality was also found. From this pilot study hypotheses may be formulated about a relationship between environmental noise and different psycho-social and medical symptoms. It is suggested that similar studies on a larger scale are performed to elucidate long-term effects of noise.

Effect of high hydrostatic pressure on seed germination, microbial quality, anatomy-morphology and physiological characteristics of garden cress (Lepidium sativum) seedlings

NASA Astrophysics Data System (ADS)

İşlek, Cemil; Murat Altuner, Ergin; Çeter, Talip; Alpas, Hami

2013-06-01

High hydrostatic pressure is a non-thermal food processing technology that is found to increase the percentage of germination, decrease the germination time and improve the microbial quality of seeds. In this study, pressures of 100-400 MPa for 10 min at 30°C are used to compare the percentage of germination, the microbial quality of seeds, chlorophyll a and b, and total phenolic compounds concentrations in seedlings, and the anatomy-morphology characteristics of garden cress. Enhanced reductions of total aerobic mesophilic bacteria, total and fecal coliforms, and yeast and mould populations in seeds were observed, especially at 300 MPa. In addition, the percentage of germination, chlorophyll content and phenolic compounds concentrations, fresh and dry weights, and hypocotyl lengths of the seedlings are higher than those of all samples, where the percentage of germination is equal to controls but higher than other samples, and radicula length is lower than controls but higher than others.

Use of artificial intelligence in the production of high quality minced meat

NASA Astrophysics Data System (ADS)

Kapovsky, B. R.; Pchelkina, V. A.; Plyasheshnik, P. I.; Dydykin, A. S.; Lazarev, A. A.

2017-09-01

A design for an automatic line for minced meat production according to new production technology based on an innovative meat milling method is proposed. This method allows the necessary degree of raw material comminution at the stage of raw material preparation to be obtained, which leads to production intensification due to the traditional meat mass comminution equipment being unnecessary. To ensure consistent quality of the product obtained, the use of on-line automatic control of the technological process for minced meat production is envisaged. This system has been developed using artificial intelligence methods and technologies. The system is trainable during the operation process, adapts to changes in processed raw material characteristics and to external impacts that affect the system operation, and manufactures meat shavings with minimal dispersion of the typical particle size. The control system includes equipment for express analysis of the chemical composition of the minced meat and its temperature after comminution. In this case, the minced meat production process can be controlled strictly as a function of time, which excludes subjective factors for assessing the degree of finished product readiness. This will allow finished meat products with consistent, targeted high quality to be produced.

Dropwise additive manufacturing of pharmaceutical products for melt-based dosage forms.

PubMed

Içten, Elçin; Giridhar, Arun; Taylor, Lynne S; Nagy, Zoltan K; Reklaitis, Gintaras V

2015-05-01

The US Food and Drug Administration introduced the quality by design approach and process analytical technology guidance to encourage innovation and efficiency in pharmaceutical development, manufacturing, and quality assurance. As part of this renewed emphasis on the improvement of manufacturing, the pharmaceutical industry has begun to develop more efficient production processes with more intensive use of online measurement and sensing, real-time quality control, and process control tools. Here, we present dropwise additive manufacturing of pharmaceutical products (DAMPP) as an alternative to conventional pharmaceutical manufacturing methods. This mini-manufacturing process for the production of pharmaceuticals utilizes drop on demand printing technology for automated and controlled deposition of melt-based formulations onto edible substrates. The advantages of drop-on-demand technology, including reproducible production of small droplets, adjustable drop sizing, high placement accuracy, and flexible use of different formulations, enable production of individualized dosing even for low-dose and high-potency drugs. In this work, DAMPP is used to produce solid oral dosage forms from hot melts of an active pharmaceutical ingredient and a polymer. The dosage forms are analyzed to show the reproducibility of dosing and the dissolution behavior of different formulations. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

RoCoMAR: robots' controllable mobility aided routing and relay architecture for mobile sensor networks.

PubMed

Le, Duc Van; Oh, Hoon; Yoon, Seokhoon

2013-07-05

In a practical deployment, mobile sensor network (MSN) suffers from a low performance due to high node mobility, time-varying wireless channel properties, and obstacles between communicating nodes. In order to tackle the problem of low network performance and provide a desired end-to-end data transfer quality, in this paper we propose a novel ad hoc routing and relaying architecture, namely RoCoMAR (Robots' Controllable Mobility Aided Routing) that uses robotic nodes' controllable mobility. RoCoMAR repeatedly performs link reinforcement process with the objective of maximizing the network throughput, in which the link with the lowest quality on the path is identified and replaced with high quality links by placing a robotic node as a relay at an optimal position. The robotic node resigns as a relay if the objective is achieved or no more gain can be obtained with a new relay. Once placed as a relay, the robotic node performs adaptive link maintenance by adjusting its position according to the movements of regular nodes. The simulation results show that RoCoMAR outperforms existing ad hoc routing protocols for MSN in terms of network throughput and end-to-end delay.

Microstructural Influence on Mechanical Properties in Plasma Microwelding of Ti6Al4V Alloy

NASA Astrophysics Data System (ADS)

Baruah, M.; Bag, S.

2016-11-01

The complexity of joining Ti6Al4V alloy enhances with reduction in sheet thickness. The present work puts emphasis on microplasma arc welding (MPAW) of 500-μm-thick Ti6Al4V alloy in butt joint configuration. Using controlled and regulated arc current, the MPAW process is specifically designed to use in joining of thin sheet components over a wide range of process parameters. The weld quality is assessed by carefully controlling the process parameters and by reducing the formation of oxides. The combined effect of welding speed and current on the weld joint properties is evaluated for joining of Ti6Al4V alloy. The macro- and microstructural characterizations of the weldment by optical microscopy as well as the analysis of mechanical properties by microtensile and microhardness test have been performed. The weld joint quality is affected by specifically designed fixture that controls the oxidation of the joint and introduces high cooling rate. Hence, the solidified microstructure of welded specimen influences the mechanical properties of the joint. The butt joint of titanium alloy by MPAW at optimal process parameters is of very high quality, without any internal defects and with minimum residual distortion.

Data exploration, quality control and statistical analysis of ChIP-exo/nexus experiments

PubMed Central

Welch, Rene; Chung, Dongjun; Grass, Jeffrey; Landick, Robert

2017-01-01

Abstract ChIP-exo/nexus experiments rely on innovative modifications of the commonly used ChIP-seq protocol for high resolution mapping of transcription factor binding sites. Although many aspects of the ChIP-exo data analysis are similar to those of ChIP-seq, these high throughput experiments pose a number of unique quality control and analysis challenges. We develop a novel statistical quality control pipeline and accompanying R/Bioconductor package, ChIPexoQual, to enable exploration and analysis of ChIP-exo and related experiments. ChIPexoQual evaluates a number of key issues including strand imbalance, library complexity, and signal enrichment of data. Assessment of these features are facilitated through diagnostic plots and summary statistics computed over regions of the genome with varying levels of coverage. We evaluated our QC pipeline with both large collections of public ChIP-exo/nexus data and multiple, new ChIP-exo datasets from Escherichia coli. ChIPexoQual analysis of these datasets resulted in guidelines for using these QC metrics across a wide range of sequencing depths and provided further insights for modelling ChIP-exo data. PMID:28911122

Data exploration, quality control and statistical analysis of ChIP-exo/nexus experiments.

PubMed

Welch, Rene; Chung, Dongjun; Grass, Jeffrey; Landick, Robert; Keles, Sündüz

2017-09-06

ChIP-exo/nexus experiments rely on innovative modifications of the commonly used ChIP-seq protocol for high resolution mapping of transcription factor binding sites. Although many aspects of the ChIP-exo data analysis are similar to those of ChIP-seq, these high throughput experiments pose a number of unique quality control and analysis challenges. We develop a novel statistical quality control pipeline and accompanying R/Bioconductor package, ChIPexoQual, to enable exploration and analysis of ChIP-exo and related experiments. ChIPexoQual evaluates a number of key issues including strand imbalance, library complexity, and signal enrichment of data. Assessment of these features are facilitated through diagnostic plots and summary statistics computed over regions of the genome with varying levels of coverage. We evaluated our QC pipeline with both large collections of public ChIP-exo/nexus data and multiple, new ChIP-exo datasets from Escherichia coli. ChIPexoQual analysis of these datasets resulted in guidelines for using these QC metrics across a wide range of sequencing depths and provided further insights for modelling ChIP-exo data. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

RoCoMAR: Robots' Controllable Mobility Aided Routing and Relay Architecture for Mobile Sensor Networks

PubMed Central

Van Le, Duc; Oh, Hoon; Yoon, Seokhoon

2013-01-01

In a practical deployment, mobile sensor network (MSN) suffers from a low performance due to high node mobility, time-varying wireless channel properties, and obstacles between communicating nodes. In order to tackle the problem of low network performance and provide a desired end-to-end data transfer quality, in this paper we propose a novel ad hoc routing and relaying architecture, namely RoCoMAR (Robots' Controllable Mobility Aided Routing) that uses robotic nodes' controllable mobility. RoCoMAR repeatedly performs link reinforcement process with the objective of maximizing the network throughput, in which the link with the lowest quality on the path is identified and replaced with high quality links by placing a robotic node as a relay at an optimal position. The robotic node resigns as a relay if the objective is achieved or no more gain can be obtained with a new relay. Once placed as a relay, the robotic node performs adaptive link maintenance by adjusting its position according to the movements of regular nodes. The simulation results show that RoCoMAR outperforms existing ad hoc routing protocols for MSN in terms of network throughput and end-to-end delay. PMID:23881134

Purification of High Molecular Weight Genomic DNA from Powdery Mildew for Long-Read Sequencing.

PubMed

Feehan, Joanna M; Scheibel, Katherine E; Bourras, Salim; Underwood, William; Keller, Beat; Somerville, Shauna C

2017-03-31

The powdery mildew fungi are a group of economically important fungal plant pathogens. Relatively little is known about the molecular biology and genetics of these pathogens, in part due to a lack of well-developed genetic and genomic resources. These organisms have large, repetitive genomes, which have made genome sequencing and assembly prohibitively difficult. Here, we describe methods for the collection, extraction, purification and quality control assessment of high molecular weight genomic DNA from one powdery mildew species, Golovinomyces cichoracearum. The protocol described includes mechanical disruption of spores followed by an optimized phenol/chloroform genomic DNA extraction. A typical yield was 7 µg DNA per 150 mg conidia. The genomic DNA that is isolated using this procedure is suitable for long-read sequencing (i.e., > 48.5 kbp). Quality control measures to ensure the size, yield, and purity of the genomic DNA are also described in this method. Sequencing of the genomic DNA of the quality described here will allow for the assembly and comparison of multiple powdery mildew genomes, which in turn will lead to a better understanding and improved control of this agricultural pathogen.

Cost-effectiveness of dabigatran for stroke prophylaxis in atrial fibrillation.

PubMed

Shah, Shimoli V; Gage, Brian F

2011-06-07

Recent studies have investigated alternatives to warfarin for stroke prophylaxis in patients with atrial fibrillation (AF), but whether these alternatives are cost-effective is unknown. On the basis of the results from Randomized Evaluation of Long Term Anticoagulation Therapy (RE-LY) and other trials, we developed a decision-analysis model to compare the cost and quality-adjusted survival of various antithrombotic therapies. We ran our Markov model in a hypothetical cohort of 70-year-old patients with AF using a cost-effectiveness threshold of $50 000/quality-adjusted life-year. We estimated the cost of dabigatran as US $9 a day. For a patient with an average risk of major hemorrhage (≈3%/y), the most cost-effective therapy depended on stroke risk. For patients with the lowest stroke rate (CHADS2 stroke score of 0), only aspirin was cost-effective. For patients with a moderate stroke rate (CHADS2 score of 1 or 2), warfarin was cost-effective unless the risk of hemorrhage was high or quality of international normalized ratio control was poor (time in the therapeutic range <57.1%). For patients with a high stroke risk (CHADS(2) stroke score ≥3), dabigatran 150 mg (twice daily) was cost-effective unless international normalized ratio control was excellent (time in the therapeutic range >72.6%). Neither dabigatran 110 mg nor dual therapy (aspirin and clopidogrel) was cost-effective. Dabigatran 150 mg (twice daily) was cost-effective in AF populations at high risk of hemorrhage or high risk of stroke unless international normalized ratio control with warfarin was excellent. Warfarin was cost-effective in moderate-risk AF populations unless international normalized ratio control was poor.

Method of fabricating optical waveguides by ion implantation doping

DOEpatents

Appleton, Bill R.; Ashley, Paul R.; Buchal, Christopher J.

1989-01-01

A method for fabricating high-quality optical waveguides in optical quality oxide crystals by ion implantation doping and controlled epitaxial recrystallization is provided. Masked LiNbO.sub.3 crystals are implanted with high concentrations of Ti dopant at ion energies of about 350 keV while maintaining the crystal near liquid nitrogen temperature. Ion implantation doping produces an amorphous, Ti-rich nonequilibrium phase in the implanted region. Subsequent thermal annealing in a water-saturated oxygen atmosphere at up to 1000.degree. C. produces solid-phase epitaxial regrowth onto the crystalline substrate. A high-quality single crystalline layer results which incorporates the Ti into the crystal structure at much higher concentrations than is possible by standard diffusion techniques, and this implanted region has excellent optical waveguides properties.

Monitoring scale scores over time via quality control charts, model-based approaches, and time series techniques.

PubMed

Lee, Yi-Hsuan; von Davier, Alina A

2013-07-01

Maintaining a stable score scale over time is critical for all standardized educational assessments. Traditional quality control tools and approaches for assessing scale drift either require special equating designs, or may be too time-consuming to be considered on a regular basis with an operational test that has a short time window between an administration and its score reporting. Thus, the traditional methods are not sufficient to catch unusual testing outcomes in a timely manner. This paper presents a new approach for score monitoring and assessment of scale drift. It involves quality control charts, model-based approaches, and time series techniques to accommodate the following needs of monitoring scale scores: continuous monitoring, adjustment of customary variations, identification of abrupt shifts, and assessment of autocorrelation. Performance of the methodologies is evaluated using manipulated data based on real responses from 71 administrations of a large-scale high-stakes language assessment.

Characteristics of Clinical Studies Used for US Food and Drug Administration Approval of High-Risk Medical Device Supplements.

PubMed

Zheng, Sarah Y; Dhruva, Sanket S; Redberg, Rita F

2017-08-15

High-risk medical devices often undergo modifications, which are approved by the US Food and Drug Administration (FDA) through various kinds of premarket approval (PMA) supplements. There have been multiple high-profile recalls of devices approved as PMA supplements. To characterize the quality of the clinical studies and data (strength of evidence) used to support FDA approval of panel-track supplements (a type of PMA supplement pathway that is used for significant changes in a device or indication for use and always requires clinical data). Descriptive study of clinical studies supporting panel-track supplements approved by the FDA between April 19, 2006, and October 9, 2015. Panel-track supplement approval. Methodological quality of studies including randomization, blinding, type of controls, clinical vs surrogate primary end points, use of post hoc analyses, and reporting of age and sex. Eighty-three clinical studies supported the approval of 78 panel-track supplements, with 71 panel-track supplements (91%) supported by a single study. Of the 83 studies, 37 (45%) were randomized clinical trials and 25 (30%) were blinded. The median number of patients per study was 185 (interquartile range, 75-305), and the median follow-up duration was 180 days (interquartile range, 84-270 days). There were a total of 150 primary end points (mean [SD], 1.8 [1.2] per study), and 57 primary end points (38%) were compared with controls. Of primary end points with controls, 6 (11%) were retrospective controls and 51 (89%) were active controls. One hundred twenty-one primary end points (81%) were surrogate end points. Thirty-three studies (40%) did not report age and 25 (30%) did not report sex for all enrolled patients. The FDA required postapproval studies for 29 of 78 (37%) panel-track supplements. Among clinical studies used to support FDA approval of high-risk medical device modifications, fewer than half were randomized, blinded, or controlled, and most primary outcomes were based on surrogate end points. These findings suggest that the quality of studies and data evaluated to support approval by the FDA of modifications of high-risk devices should be improved.

Economically attractive route for the preparation of high quality magnetic nanoparticles by the thermal decomposition of iron(III) acetylacetonate.

PubMed

Effenberger, Fernando B; Couto, Ricardo A; Kiyohara, Pedro K; Machado, Giovanna; Masunaga, Sueli H; Jardim, Renato F; Rossi, Liane M

2017-03-17

The thermal decomposition (TD) methods are among the most successful in obtaining magnetic nanoparticles with a high degree of control of size and narrow particle size distribution. Here we investigated the TD of iron(III) acetylacetonate in the presence of oleic acid, oleylamine, and a series of alcohols in order to disclose their role and also investigate economically attractive alternatives for the synthesis of iron oxide nanoparticles without compromising their size and shape control. We have found that some affordable and reasonably less priced alcohols, such as 1,2-octanediol and cyclohexanol, may replace the commonly used and expensive 1,2-hexadecanediol, providing an economically attractive route for the synthesis of high quality magnetic nanoparticles. The relative cost for the preparation of Fe 3 O 4 NPs is reduced to only 21% and 9% of the original cost when using 1,2-octanediol and cyclohexanol, respectively.

Nutritional and sensory quality evaluation of sponge cake prepared by incorporation of high dietary fiber containing mango (Mangifera indica var. Chokanan) pulp and peel flours.

PubMed

Aziah, A A Noor; Min, W Lee; Bhat, Rajeev

2011-09-01

Sponge cake prepared by partial substitution of wheat flour with mango pulp and mango peel flours (MPuF and MPeF, respectively) at different concentrations (control, 5%, 10%, 20% or 30%) were investigated for the physico-chemical, nutritional and organoleptic characteristics. Results showed sponge cake incorporated with MPuF and MPeF to have high dietary fiber with low fat, calorie, hydrolysis and predicted glycemic index compared with the control. Increasing the levels of MPuF and MPeF in sponge cake had significant impact on the volume, firmness and color. Sensory evaluation showed sponge cake formulated with 10% MPuF and 10% MPeF to be the most acceptable. MPeF and MPuF have high potential as fiber-rich ingredients and can be utilized in the preparation of cake and other bakery products to improve the nutritional qualities.

Quality Control for Interviews to Obtain Dietary Recalls from Children for Research Studies

PubMed Central

SHAFFER, NICOLE M.; THOMPSON, WILLIAM O.; BAGLIO, MICHELLE L.; GUINN, CAROLINE H.; FRYE, FRANCESCA H. A.

2005-01-01

Quality control is an important aspect of a study because the quality of data collected provides a foundation for the conclusions drawn from the study. For studies that include interviews, establishing quality control for interviews is critical in ascertaining whether interviews are conducted according to protocol. Despite the importance of quality control for interviews, few studies adequately document the quality control procedures used during data collection. This article reviews quality control for interviews and describes methods and results of quality control for interviews from two of our studies regarding the accuracy of children's dietary recalls; the focus is on quality control regarding interviewer performance during the interview, and examples are provided from studies with children. For our two studies, every interview was audio recorded and transcribed. The audio recording and typed transcript from one interview conducted by each research dietitian either weekly or daily were randomly selected and reviewed by another research dietitian, who completed a standardized quality control for interviews checklist. Major strengths of the methods of quality control for interviews in our two studies include: (a) interviews obtained for data collection were randomly selected for quality control for interviews, and (b) quality control for interviews was assessed on a regular basis throughout data collection. The methods of quality control for interviews described may help researchers design appropriate methods of quality control for interviews for future studies. PMID:15389417

Reputation and Competition in a Hidden Action Model

PubMed Central

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium. PMID:25329387

Reputation and competition in a hidden action model.

PubMed

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium.

Partnership for Continuous Improvement

NASA Technical Reports Server (NTRS)

1990-01-01

The proceedings are presented of the sixth annual conference on quality control between NASA and its contractors. The emphasis is placed on a commitment to quality and excellence that guarantees mission success. A forum is provided for representatives from government, industry, and academia to exchange ideas and experiences, encouraging total quality performance that results in high quality products and services. Key points are highlighted from the presentations and activities are described that have resulted in a broad range of improvements in products and services from government, industry, and academia. Long term commitment to quality is an essential requirement that ensures future success. That commitment reinterates the dedication to excellence in space exploration and to national quality and productivity improvement.

Alexithymia and its impact on quality of life in a group of Brazilian women with migraine without aura

PubMed Central

2013-01-01

Background Migraine is a type of primary headache widely known for its impact on quality of life of patients. Although the psychological aspects of the disease are receiving increasing attention in current research, some of them, as alexithymia, are still seldom explored. This study aimed to provide evidence on the relationships between markers of depression, anxiety, alexithymia, self-reflection, insight and quality of life in migraine. Methods Forty female outpatients from a Brazilian specialized headache hospital service and a paired control group were compared. Results The results revealed that women with migraine had higher levels of depression, anxiety and alexithymia, and lower levels of quality of life, self-reflection and insight, compared to controls. Quality of life in women with migraine was predicted by levels of depression and one alexithymia factor (ability to express emotions and fantasies). A binary regression analysis between clinical and control groups revealed the migraine group to comprise individuals with high anxiety, low quality of life in the physical domain and the presence of a concrete thinking style. Conclusions The results highlight the relevance of considering psychological variables in the routine healthcare practices for migraine patients in general, while keeping steady attention to individual case features. PMID:23565860

[Report quality of randomized controlled trials of moxibustion for knee osteoarthritis based on CONSORT and STRICTOM].

PubMed

Xiong, Jun; Zhu, Daocheng; Chen, Rixin; Ye, Wenguo

2015-08-01

The report quality of randomized controlled trials (RCTs) of moxibustion for knee osteoarthritis (KOA) in China was evaluated by Consolidated Standards for Reporting of Trials (CONSORT) and Standards for Reporting Interventions in Controlled Trials of Moxibustion (STRICTOM). Computer and manual retrieval was used. Four databases of China National Knowledge Infrastructure (CNKD, China Biomedicine (CBM), VIP and WNFANG were searched in combination with manual retrieval for relevant journals to screen the literature that: met the inclusive criteria, and CONSORT and STRICTOM were used to assess the report quality. A total of 52 RCTs were included. It was found that unclear description of random methods, low use of blind methods, no allocation concealment, no sample size calculation, no intention-to-treat analysis,inadequate report of moxibustion details and no mention of practitioners background existed in the majority of the RCTs. Although the quality of RCTs of moxibustion for KOA was generally low, reducing the reliability and homogeneous comparability of the reports ,the quality of heat-sensitive moxibustion RCTs was high. It was believed that in order to improve the reliability and quality of RCTs of moxibustion, CONSORT and STRICTOM should be introduced into the RCT design of moxibustion and be strictly performed.

Cloud Motion Vectors from MISR using Sub-pixel Enhancements

NASA Technical Reports Server (NTRS)

Davies, Roger; Horvath, Akos; Moroney, Catherine; Zhang, Banglin; Zhu, Yanqiu

2007-01-01

The operational retrieval of height-resolved cloud motion vectors by the Multiangle Imaging SpectroRadiometer on the Terra satellite has been significantly improved by using sub-pixel approaches to co-registration and disparity assessment, and by imposing stronger quality control based on the agreement between independent forward and aft triplet retrievals. Analysis of the fore-aft differences indicates that CMVs pass the basic operational quality control 67% of the time, with rms differences - in speed of 2.4 m/s, in direction of 17 deg, and in height assignment of 290 m. The use of enhanced quality control thresholds reduces these rms values to 1.5 m/s, 17 deg and 165 m, respectively, at the cost of reduced coverage to 45%. Use of the enhanced thresholds also eliminates a tendency for the rms differences to increase with height. Comparison of CMVs from an earlier operational version that had slightly weaker quality control, with 6-hour forecast winds from the Global Modeling and Assimilation Office yielded very low bias values and an rms vector difference that ranged from 5 m/s for low clouds to 10 m/s for high clouds.

A simulation investigation of scout/attack helicopter directional control requirements for hover and low-speed tasks

NASA Technical Reports Server (NTRS)

Bivens, Courtland C.; Guercio, Joseph G.

1987-01-01

A piloted simulator experiment was conducted to investigate directional axis handling qualities requirements for low speed and hover tasks performed by a Scout/Attack helicopter. Included were the directional characteristics of various candidate light helicopter family configurations. Also, the experiment focused on conventional single main/tail rotor configurations of the OH-58 series aircraft, where the first-order yaw-axis dynamic effects that contributed to the loss of tail rotor control were modeled. Five pilots flew 22 configurations under various wind conditions. Cooper-Harper handling quality ratings were used as the primary measure of merit of each configuration. The results of the experiment indicate that rotorcraft configurations with high directional gust sensitivity require greater minimum yaw damping to maintain satisfactory handling qualities during nap-of-the-Earth flying tasks. It was also determined that both yaw damping and control response are critical handling qualities parameters in performing the air-to-air target acquisition and tracking task. Finally, the lack of substantial yaw damping and larger values of gust sensitivity increased the possibility of loss of directional control at low airspeeds for the single main/tail rotor configurations.

[Rethinking clinical research in surgical oncology. From comic opera to quality control].

PubMed

Evrard, Serge

2016-01-01

The evidence base for the effectiveness of surgical interventions is relatively poor and data from large, randomized prospective studies are rare with often a poor quality. Many efforts have been made to increase the number of high quality randomized trials in surgery and theoretical proposals have been put forward to improve the situation, but practical implementation of these proposals is seriously lacking. The consequences of this policy are not trivial; with very few patients included in surgical oncology trials, this represents wasted opportunity for advances in cancer treatment. In this review, we cover the difficulties inherent to clinical research in surgical oncology, such as quality control, equipoise, accrual, and funding and promote alternative designs to the randomized controlled trial. Although the classic randomized controlled trial has a valid but limited place in surgical oncology, other prospective designs need to be promoted as a new deal. This new deal not only implicates surgeons but also journal editors, tender jury, as well as regulatory bodies to cover legal gaps currently surrounding surgical innovation. Copyright © 2015 Société Française du Cancer. Published by Elsevier Masson SAS. All rights reserved.

[On-site quality control of acupuncture randomized controlled trial: design of content and checklist of quality control based on PICOST].

PubMed

Li, Hong-Jiao; He, Li-Yun; Liu, Zhi-Shun; Sun, Ya-Nan; Yan, Shi-Yan; Liu, Jia; Zhao, Ye; Liu, Bao-Yan

2014-02-01

To effectively guarantee quality of randomized controlld trial (RCT) of acupuncture and develop reasonable content and checklist of on-site quality control, influencing factors on quality of acupuncture RCT are analyzed and scientificity of quality control content and feasibility of on-site manipulation are put into overall consideration. Based on content and checklist of on-site quality control in National 11th Five-Year Plan Project Optimization of Comprehensive Treatment Plan for TCM in Prevention and Treatment of Serious Disease and Clinical Assessment on Generic Technology and Quality Control Research, it is proposed that on-site quality control of acupuncture RCT should be conducted with PICOST (patient, intervention, comparison, out come, site and time) as core, especially on quality control of interveners' skills and outcome assessment of blinding, and checklist of on-site quality control is developed to provide references for undertaking groups of the project.

Air quality mapping using GIS and economic evaluation of health impact for Mumbai City, India.

PubMed

Kumar, Awkash; Gupta, Indrani; Brandt, Jørgen; Kumar, Rakesh; Dikshit, Anil Kumar; Patil, Rashmi S

2016-05-01

Mumbai, a highly populated city in India, has been selected for air quality mapping and assessment of health impact using monitored air quality data. Air quality monitoring networks in Mumbai are operated by National Environment Engineering Research Institute (NEERI), Maharashtra Pollution Control Board (MPCB), and Brihanmumbai Municipal Corporation (BMC). A monitoring station represents air quality at a particular location, while we need spatial variation for air quality management. Here, air quality monitored data of NEERI and BMC were spatially interpolated using various inbuilt interpolation techniques of ArcGIS. Inverse distance weighting (IDW), Kriging (spherical and Gaussian), and spline techniques have been applied for spatial interpolation for this study. The interpolated results of air pollutants sulfur dioxide (SO2), nitrogen dioxide (NO2) and suspended particulate matter (SPM) were compared with air quality data of MPCB in the same region. Comparison of results showed good agreement for predicted values using IDW and Kriging with observed data. Subsequently, health impact assessment of a ward was carried out based on total population of the ward and air quality monitored data within the ward. Finally, health cost within a ward was estimated on the basis of exposed population. This study helps to estimate the valuation of health damage due to air pollution. Operating more air quality monitoring stations for measurement of air quality is highly resource intensive in terms of time and cost. The appropriate spatial interpolation techniques can be used to estimate concentration where air quality monitoring stations are not available. Further, health impact assessment for the population of the city and estimation of economic cost of health damage due to ambient air quality can help to make rational control strategies for environmental management. The total health cost for Mumbai city for the year 2012, with a population of 12.4 million, was estimated as USD8000 million.

An empirical evaluation of software quality assurance practices and challenges in a developing country: a comparison of Nigeria and Turkey.

PubMed

Sowunmi, Olaperi Yeside; Misra, Sanjay; Fernandez-Sanz, Luis; Crawford, Broderick; Soto, Ricardo

2016-01-01

The importance of quality assurance in the software development process cannot be overemphasized because its adoption results in high reliability and easy maintenance of the software system and other software products. Software quality assurance includes different activities such as quality control, quality management, quality standards, quality planning, process standardization and improvement amongst others. The aim of this work is to further investigate the software quality assurance practices of practitioners in Nigeria. While our previous work covered areas on quality planning, adherence to standardized processes and the inherent challenges, this work has been extended to include quality control, software process improvement and international quality standard organization membership. It also makes comparison based on a similar study carried out in Turkey. The goal is to generate more robust findings that can properly support decision making by the software community. The qualitative research approach, specifically, the use of questionnaire research instruments was applied to acquire data from software practitioners. In addition to the previous results, it was observed that quality assurance practices are quite neglected and this can be the cause of low patronage. Moreover, software practitioners are neither aware of international standards organizations or the required process improvement techniques; as such their claimed standards are not aligned to those of accredited bodies, and are only limited to their local experience and knowledge, which makes it questionable. The comparison with Turkey also yielded similar findings, making the results typical of developing countries. The research instrument used was tested for internal consistency using the Cronbach's alpha, and it was proved reliable. For the software industry in developing countries to grow strong and be a viable source of external revenue, software assurance practices have to be taken seriously because its effect is evident in the final product. Moreover, quality frameworks and tools which require minimum time and cost are highly needed in these countries.

Robotic operation of the Observatorio Astrofísico de Javalambre

NASA Astrophysics Data System (ADS)

Yanes-Díaz, A.; Antón, J. L.; Rueda-Teruel, S.; Guillén-Civera, L.; Bello, R.; Jiménez-Mejías, D.; Chueca, S.; Lasso-Cabrera, N. M.; Suárez, O.; Rueda-Teruel, F.; Cenarro, A. J.; Cristóbal-Hornillos, D.; Marín-Franch, A.; Luis-Simoes, R.; López-Alegre, G.; Rodríguez-Hernández, M. A. C.; Moles, M.; Ederoclite, A.; Varela, J.; Vázquez Ramió, H.; Díaz-Martí, M. C.; Iglesias-Marzoa, R.; Maicas, N.; Lamadrid, J. L.; López-Sainz, A.; Hernández-Fuertes, J.; Valdivielso, L.

2015-05-01

The Observatorio Astrofísico de Javalambre (OAJ) is a new astronomical facility located at the Sierra de Javalambre (Teruel, Spain) whose primary role will be to conduct all-sky astronomical surveys with two unprecedented telescopes of unusually large fields of view: the JST/T250, a 2.55 m telescope of 3 deg field of view, and the JAST/T80, an 83 cm telescope of 2 deg field of view. CEFCA engineering team has been designing the OAJ control system as a global concept to manage, monitor, control and maintain all the observatory systems including not only astronomical subsystems but also infrastructure and other facilities. Three main factors have been considered in the design of a global control system for the robotic OAJ: quality, reliability and efficiency. We propose CIA (Control Integrated Architecture) design and OEE (Overall Equipment Effectiveness) as a key performance indicator in order to improve operation processes, minimizing resources and obtain high cost reduction maintaining quality requirements. Here we present the OAJ robotic control strategy to achieve maximum quality efficiency for the observatory surveys, processes and operations, giving practical examples of our approach.

Separation of pigment formulations by high-performance thin-layer chromatography with automated multiple development.

PubMed

Stiefel, Constanze; Dietzel, Sylvia; Endress, Marc; Morlock, Gertrud E

2016-09-02

Food packaging is designed to provide sufficient protection for the respective filling, legally binding information for the consumers like nutritional facts or filling information, and an attractive appearance to promote the sale. For quality and safety of the package, a regular quality control of the used printing materials is necessary to get consistently good print results, to avoid migration of undesired ink components into the food and to identify potentially faulty ink batches. Analytical approaches, however, have hardly been considered for quality assurance so far due to the lack of robust, suitable methods for the analysis of rarely soluble pigment formulations. Thus, a simple and generic high-performance thin-layer chromatography (HPTLC) method for the separation of different colored pigment formulations was developed on HPTLC plates silica gel 60 by automated multiple development. The gradient system provided a sharp resolution for differently soluble pigment constituents like additives and coating materials. The results of multi-detection allowed a first assignment of the differently detectable bands to particular chemical substance classes (e.g., lipophilic components), enabled the comparison of different commercially available pigment batches and revealed substantial variations in the composition of the batches. Hyphenation of HPTLC with high resolution mass spectrometry and infrared spectroscopy allowed the characterization of single unknown pigment constituents, which may partly be responsible for known quality problems during printing. The newly developed, precise and selective HPTLC method can be used as part of routine quality control for both, incoming pigment batches and monitoring of internal pigment production processes, to secure a consistent pigment composition resulting in consistent ink quality, a faultless print image and safe products. Hyphenation of HPTLC with the A. fischeri bioassay gave first information on the bioactivity or rather on the toxicological potential of different compounds of the pigment formulations. The results of the bioassay might be helpful to choose pigment compositions that provide both, a high printing quality but at the same time guarantee a high consumer safety, especially in regard to smaller pigment components, which tend to migrate through the packaging. Copyright © 2016 Elsevier B.V. All rights reserved.

Control of sinter quality for blast furnaces of SAIL through characterization of high temperature properties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mishra, U.N.; Thakur, B.; Mediratta, S.R.

1996-12-31

Quality of blast furnace (BF) burden materials and their performance inside the furnace have attracted increased importance worldwide. High productivity, low fuel rate and stable operation of BF can be achieved by suitably controlling the quality of input materials particularly that of sinter which is the main constituent of the burden. Reduction Degradation Index (RDI), Reducibility Index (RI) and Softening-melting characteristics are some of the quality indicators of sinter. The effect of chemical composition of sinter in the ranges of CaO/SiO{sub 2} 1.4--2.0, FeO 4.0--8.0, Al{sub 2}O{sub 3} 1.3--2.0 and MgO 1.2--2.0 on the above mentioned properties have been reportedmore » in literature. Due to the peculiarity of Indian raw materials, i.e., high ash content of coke and high Al{sub 2}O{sub 3} content of iron ore, the sinter composition varies over a wide range of CaO/SiO{sub 2} 2.0--2.5, FeO 8--11%, Al{sub 2}O{sub 3} 2--4% and MgO 2--5% in different plants of SAIL. This paper discusses the effect of above constituents in higher ranges as compared to earlier study on RDI, RI and Softening-melting properties so that sinter composition can be optimized for achieving desirable properties for better BF performance.« less

Resolving Identification Issues of Saraca asoca from Its Adulterant and Commercial Samples Using Phytochemical Markers

PubMed Central

Hegde, Satisha; Hegde, Harsha Vasudev; Jalalpure, Sunil Satyappa; Peram, Malleswara Rao; Pai, Sandeep Ramachandra; Roy, Subarna

2017-01-01

Saraca asoca (Roxb.) De Wilde (Ashoka) is a highly valued endangered medicinal tree species from Western Ghats of India. Besides treating cardiac and circulatory problems, S. asoca provides immense relief in gynecological disorders. Higher price and demand, in contrast to the smaller population size of the plant, have motivated adulteration with other plants such as Polyalthia longifolia (Sonnerat) Thwaites. The fundamental concerns in quality control of S. asoca arise due to its part of medicinal value (Bark) and the chemical composition. Phytochemical fingerprinting with proper selection of analytical markers is a promising method in addressing quality control issues. In the present study, high-performance liquid chromatography of phenolic compounds (gallic acid, catechin, and epicatechin) coupled to multivariate analysis was used. Five samples each of S. asoca, P. longifolia from two localities alongside five commercial market samples showed evidence of adulteration. Subsequently, multivariate hierarchical cluster analysis and principal component analysis was established to discriminate the adulterants of S. asoca. The proposed method ascertains identification of S. asoca from its putative adulterant P. longifolia and commercial market samples. The data generated may also serve as baseline data to form a quality standard for pharmacopoeias. SUMMARY Simultaneous quantification of gallic acid, catechin, epicatechin from Saraca asoca by high-performance liquid chromatographyDetection of S. asoca from adulterant and commercial samplesUse of analytical method along with a statistical tool for addressing quality issues. Abbreviations used: HPLC: High Performance Liquid Chromatography; RP-HPLC: Reverse Phase High Performance Liquid Chromatography; CAT: Catechin; EPI: Epicatechin; GA: Gallic acid; PCA: Principal Component Analysis. PMID:28808391

Forest management guidelines for controlling wild grapevines

Treesearch

H. Clay Smith

1984-01-01

Grapevines (Vitis spp.) are becoming a major problem to forest managers in the Appalachians, especially when clearcutting is done on highly productive hardwood sites. Where present, grapevines can reduce tree quality and growth, and eventually kill the tree. Silvical characteristics of grapevines are discussed as background for grapevine control....

Reporting Randomized Controlled Trials in Education

ERIC Educational Resources Information Center

Mayo-Wilson, Evan; Grant, Sean; Montgomery, Paul

2014-01-01

Randomized controlled trials (RCTs) are increasingly used to evaluate programs and interventions in order to inform education policy and practice. High quality reports of these RCTs are needed for interested readers to understand the rigor of the study, the interventions tested, and the context in which the evaluation took place (Mayo-Wilson et…

78 FR 78415 - Submission for Review: Customer Service Surveys, OMB Control No. 3206-0236

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-26

... . SUPPLEMENTARY INFORMATION: The Office of Personnel Management (OPM) leads Federal agencies in shaping human resources management systems to effectively recruit, develop, manage and retain a high quality and diverse... OFFICE OF PERSONNEL MANAGEMENT Submission for Review: Customer Service Surveys, OMB Control No...

21 CFR 111.105 - What must quality control personnel do?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 2 2011-04-01 2011-04-01 false What must quality control personnel do? 111.105... for Quality Control § 111.105 What must quality control personnel do? Quality control personnel must... manufacturing record. To do so, quality control personnel must perform operations that include: (a) Approving or...

Progress in Brewing Science and Beer Production.

PubMed

Bamforth, C W

2017-06-07

The brewing of beer is an ancient biotechnology, the unit processes of which have not changed in hundreds of years. Equally, scientific study within the brewing industry not only has ensured that modern beer making is highly controlled, leading to highly consistent, high-quality, healthful beverages, but also has informed many other fermentation-based industries.