Key factors for a high-quality VR experience

NASA Astrophysics Data System (ADS)

Champel, Mary-Luc; Doré, Renaud; Mollet, Nicolas

2017-09-01

For many years, Virtual Reality has been presented as a promising technology that could deliver a truly new experience to users. The media and entertainment industry is now investigating the possibility to offer a video-based VR 360 experience. Nevertheless, there is a substantial risk that VR 360 could have the same fate as 3DTV if it cannot offer more than just being the next fad. The present paper aims at presenting the various quality factors required for a high-quality VR experience. More specifically, this paper will focus on the main three VR quality pillars: visual, audio and immersion.

Realization of high quality production schedules: Structuring quality factors via iteration of user specification processes

NASA Technical Reports Server (NTRS)

Hamazaki, Takashi

1992-01-01

This paper describes an architecture for realizing high quality production schedules. Although quality is one of the most important aspects of production scheduling, it is difficult, even for a user, to specify precisely. However, it is also true that the decision as to whether a scheduler is good or bad can only be made by the user. This paper proposes the following: (1) the quality of a schedule can be represented in the form of quality factors, i.e. constraints and objectives of the domain, and their structure; (2) quality factors and their structure can be used for decision making at local decision points during the scheduling process; and (3) that they can be defined via iteration of user specification processes.

Are Public Libraries Improving Quality of Education? When the Provision of Public Goods Is Not Enough. Policy Research Working Paper 7429

ERIC Educational Resources Information Center

Rodriguez-Lesmes, Paul; Trujillo, Jose Daniel; Valderrama, Daniel

2015-01-01

This paper analyzes the relation between public, education-related infrastructure and the quality of education in schools. The analysis uses a case study of the establishment of two large, high-quality public libraries in low-income areas in Bogotá, Colombia. It assesses the impact of these libraries on the quality of education by comparing…

And, not or: Quality, quantity in scientific publishing

PubMed Central

Allesina, Stefano

2017-01-01

Scientists often perceive a trade-off between quantity and quality in scientific publishing: finite amounts of time and effort can be spent to produce few high-quality papers or subdivided to produce many papers of lower quality. Despite this perception, previous studies have indicated the opposite relationship, in which productivity (publishing more papers) is associated with increased paper quality (usually measured by citation accumulation). We examine this question in a novel way, comparing members of the National Academy of Sciences with themselves across years, and using a much larger dataset than previously analyzed. We find that a member’s most highly cited paper in a given year has more citations in more productive years than in in less productive years. Their lowest cited paper each year, on the other hand, has fewer citations in more productive years. To disentangle the effect of the underlying distributions of citations and productivities, we repeat the analysis for hypothetical publication records generated by scrambling each author’s citation counts among their publications. Surprisingly, these artificial histories re-create the above trends almost exactly. Put another way, the observed positive relationship between quantity and quality can be interpreted as a consequence of randomly drawing citation counts for each publication: more productive years yield higher-cited papers because they have more chances to draw a large value. This suggests that citation counts, and the rewards that have come to be associated with them, may be more stochastic than previously appreciated. PMID:28570567

75 FR 59212 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the People's Republic of China: Final... suitable for high-quality print graphics using sheet-fed presses from the People's Republic of China (``PRC...-Fed Presses from the People's Republic of China: Preliminary Affirmative Countervailing Duty...

How to reduce scientific irreproducibility: the 5-year reflection.

PubMed

Fiala, Clare; Diamandis, Eleftherios P

2017-10-26

We discuss in depth six causes of scientific irreproducibility and their ramifications for the clinical sciences: fraud, unfounded papers published by prominent authorities, bias, technical deficiencies, fragmented science and problems with big data. Some proposed methods to combat this problem are briefly described, including an effort to replicate results from some high impact papers and a proposal that authors include detailed preclinical data in papers with supposedly high translational value. We here advocate for a 5-year reflection on papers with seemingly high clinical/translational potential, published alongside the original paper where authors reflect on the quality, reproducibility and impact of their findings. These reflections can be used as a benchmark for credibility, and begin a virtuous cycle of improving the quality of published findings in the literature.

New Pathways for Teachers, New Promises for Students: A Vision for Developing Excellent Teachers. Teacher Quality 2.0. Special Report 3

ERIC Educational Resources Information Center

Knowles, Timothy

2013-01-01

This paper outlines a set of ideas for improving teacher quality in America's schools. In it, the author proposes a combination of incremental steps and ambitious ones, designed to stimulate policymakers, practitioners, and the public to accelerate efforts to develop high-quality teachers. The paper has four main sections. First, the author…

Quality in Postgraduate Education.

ERIC Educational Resources Information Center

Zuber-Skerritt, Ortrun, Ed.; Ryan, Yoni, Ed.

This collection of papers discusses issues of quality, institutional research culture, and processes which encourage, achieve, sustain, and assure high quality teaching and research in universities, primarily from a British and Australian perspective. Part 1 is titled "Issues of Quality and Institutional Research Culture" and contains…

High-quality digital color xerography

NASA Astrophysics Data System (ADS)

Takiguchi, Koichi

1993-06-01

Image noise, tone reproduction, color reproduction, fine line reproduction, and OHP performance are the most important characteristics for a high quality color copier. Technologies enabling such quality are use of fine toner, halftone algorithm to ensure good highlight reproduction, soft roll fuser with good release performance, smooth surface and high thermal conductivity, white and smooth paper, and selection of a coating material for the surface layer of the OHP sheets. These technologies are integrated in the Fuji Xerox `A- Color' product. Utilizing 7 micrometers color toner, `A-Color' can make very high quality color copies.

Curated Collections for Educators: Five Key Papers on Evaluating Digital Scholarship.

PubMed

Quinn, Antonia; Chan, Teresa M; Sampson, Christopher; Grossman, Catherine; Butts, Christine; Casey, John; Caretta-Weyer, Holly; Gottlieb, Michael

2018-01-03

Traditionally, scholarship that was recognized for promotion and tenure consisted of clinical research, bench research, and grant funding. Recent trends have allowed for differing approaches to scholarship, including digital publication. As increasing numbers of trainees and faculty turn to online educational resources, it is imperative to critically evaluate these resources. This article summarizes five key papers that address the appraisal of digital scholarship and describes their relevance to junior clinician educators and faculty developers. In May 2017, the Academic Life in Emergency Medicine Faculty Incubator program focused on the topic of digital scholarship, providing and discussing papers relevant to the topic. We augmented this list of papers with further suggestions by guest experts and by an open call via Twitter for other important papers. Through this process, we created a list of 38 papers in total on the topic of evaluating digital scholarship. In order to determine which of these papers best describe how to evaluate digital scholarship, the authorship group assessed the papers using a modified Delphi approach to build consensus. In this paper we present the five most highly rated papers from our process about evaluating digital scholarship. We summarize each paper and discuss its specific relevance to junior faculty members and to faculty developers. These papers provide a framework for assessing the quality of digital scholarship, so that junior faculty can recommend high-quality educational resources to their trainees. These papers help guide educators on how to produce high quality digital scholarship and maximize recognition and credit in respect to receiving promotion and tenure.

Curated Collections for Educators: Five Key Papers on Evaluating Digital Scholarship

PubMed Central

Chan, Teresa M; Sampson, Christopher; Grossman, Catherine; Butts, Christine; Casey, John; Caretta-Weyer, Holly; Gottlieb, Michael

2018-01-01

Traditionally, scholarship that was recognized for promotion and tenure consisted of clinical research, bench research, and grant funding. Recent trends have allowed for differing approaches to scholarship, including digital publication. As increasing numbers of trainees and faculty turn to online educational resources, it is imperative to critically evaluate these resources. This article summarizes five key papers that address the appraisal of digital scholarship and describes their relevance to junior clinician educators and faculty developers. In May 2017, the Academic Life in Emergency Medicine Faculty Incubator program focused on the topic of digital scholarship, providing and discussing papers relevant to the topic. We augmented this list of papers with further suggestions by guest experts and by an open call via Twitter for other important papers. Through this process, we created a list of 38 papers in total on the topic of evaluating digital scholarship. In order to determine which of these papers best describe how to evaluate digital scholarship, the authorship group assessed the papers using a modified Delphi approach to build consensus. In this paper we present the five most highly rated papers from our process about evaluating digital scholarship. We summarize each paper and discuss its specific relevance to junior faculty members and to faculty developers. These papers provide a framework for assessing the quality of digital scholarship, so that junior faculty can recommend high-quality educational resources to their trainees. These papers help guide educators on how to produce high quality digital scholarship and maximize recognition and credit in respect to receiving promotion and tenure. PMID:29531874

75 FR 10774 - Certain Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses from the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-09

... Suitable For High-Quality Print Graphics Using Sheet-Fed Presses from the People's Republic of China...-quality print graphics using sheet-fed presses from the People's Republic of China (``PRC''). For... Graphics Using Sheet-Fed Presses from the People's Republic of China: Initiation of Countervailing Duty...

Australian Employers Strategies to Improve the Quality of Apprentices

ERIC Educational Resources Information Center

Smith, Erica

2007-01-01

Purpose: The purpose of the paper is to examine the ways in which Australian companies can achieve high quality apprenticeship and traineeship systems in a time of labour shortage through close attention to the recruitment and development of apprentices and trainees. Design/methodology/approach: The paper is based on six qualitative case studies…

Student Engagement in the Scottish Quality Enhancement Framework

ERIC Educational Resources Information Center

Gvaramadze, Irakli

2011-01-01

The research addressed the interplay of student engagement and quality enhancement mechanisms in the Scottish higher education system. The paper demonstrates increasing focus on student learning, learning experience and high-quality learning in the current quality enhancement approaches. The student-university coproduction model is used to…

Bridging existing governance gaps: five evidence-based actions that boards can take to pursue high quality care.

PubMed

Leggat, Sandra G; Balding, Cathy

2017-11-13

Objective To explore the impact of the organisational quality systems on quality of care in Victorian health services. Methods During 2015 a total of 55 focus groups were conducted with more than 350 managers, clinical staff and board members in eight Victorian health services to explore the effectiveness of health service quality systems. A review of the quality and safety goals and strategies outlined in the strategic and operating plans of the participating health services was also undertaken. Results This paper focuses on the data related to the leadership role of health service boards in ensuring safe, high-quality care. The findings suggest that health service boards are not fully meeting their governance accountability to ensure consistently high-quality care. The data uncovered major clinical governance gaps between stated board and executive aspirations for quality and safety and the implementation of these expectations at point of care. These gaps were further compounded by quality system confusion, over-reliance on compliance, and inadequate staff engagement. Conclusion Based on the existing evidence we propose five specific actions boards can take to close the gaps, thereby supporting improved care for all consumers. What is known about this topic? Effective governance is essential for high-quality healthcare delivery. Boards are required to play an active role in their organisation's pursuit of high quality care. What does this paper add? Recent government reports suggest that Australian health service boards are not fully meeting their governance requirements for high quality, safe care delivery, and our research pinpoints key governance gaps. What are the implications for practitioners? Based on our research findings we outline five evidence-based actions for boards to improve their governance of quality care delivery. These actions focus on an organisational strategy for high-quality care, with the chief executive officer held accountable for successful implementation, which is actively guided and monitored by the board.

Partnerships panel: the use of contractors and partnerships in public forest recreation: some considerations

Treesearch

Ben W. Twight

1995-01-01

This paper argues that short term competitive contracting and "partnerships" with low bidders cannot produce the quality or efficiency that highly socialized normatively guided career organizations, both public and private, can produce. High quality maximum efficiency production requires highly socialized primary group types of organizations, guided by a...

New Mexico Look for the STARS--AIM HIGH: QRS Profile. The Child Care Quality Rating System (QRS) Assessment

ERIC Educational Resources Information Center

Child Trends, 2010

2010-01-01

This paper presents a profile of New Mexico's Look for the STARS--AIM HIGH prepared as part of the Child Care Quality Rating System (QRS) Assessment Study. The profile consists of several sections and their corresponding descriptions including: (1) Program Information; (2) Rating Details; (3) Quality Indicators for Center-Based Programs; (4)…

University Rankings in Action? The Importance of Rankings and an Excellence Competition for University Choice of High-Ability Students

ERIC Educational Resources Information Center

Horstschraer, Julia

2012-01-01

This paper analyzes how high-ability students respond to different indicators of university quality when applying for a university. Are prospective students influenced by quality indicators of a university ranking or by an excellence status awarded within a nationwide competition? And if so, are some quality dimensions, e.g. research reputation,…

Building Portals for Evidence-Informed Education: Lessons from the Dead. A Case Study of the Development of a National Portal Intended to Enhance Evidence Informed Professionalism in Education

ERIC Educational Resources Information Center

Blamires, Mike

2015-01-01

Access to high-quality evidence has been cited as central to the enhancement of teacher professionalism. This is not a given and teacher access to high-quality evidence requires significant planning and effort. This paper considers the creation of quality-assured reviews to build sustainable quality-assured evidence sources that inform the…

How to Improve the Supply of High-Quality Teachers

ERIC Educational Resources Information Center

Hanushek, Eric Alan; Rivkin, Steven G.

2004-01-01

Virtually everybody interested in improving the performance of schools concentrates on the importance of teacher quality. Yet policy recommendations related to teacher quality frequently do not incorporate existing evidence about performance. This paper reviews the various strands of research related to teacher quality, including the role of…

Psychosocial work characteristics and sleep quality: a systematic review of longitudinal and intervention research.

PubMed

Van Laethem, Michelle; Beckers, Debby G J; Kompier, Michiel A J; Dijksterhuis, Ap; Geurts, Sabine A E

2013-11-01

The objective of this study was to review longitudinal and intervention studies examining the association between psychosocial work characteristics (eg, job demands, job control, and social support) and sleep quality. Our main research aims were to examine whether (i) psychosocial work characteristics are a predictor of sleep quality, and (ii) sleep quality, in turn, is a predictor of psychosocial work characteristics. A systematic literature search resulted in 20 relevant papers, of which 16 were longitudinal studies and 3 were intervention studies (1 study was discussed in separate papers). To quantify results, we assessed the strength of evidence of all examined associations and subsequently evaluated the studies' research quality based on predefined quality criteria. One intervention and three longitudinal studies studies were categorized as being of high-quality. In longitudinal studies, we found consistent and strong evidence for a negative relation between job demands and sleep quality as well as evidence for a positive relation between job control and sleep quality. Other psychosocial work characteristics were examined in an insufficient number of (high-quality) studies. Moreover, both intervention studies as well as studies investigating reversed and reciprocal relations are rare, which further limits the possibility of drawing conclusions on causality. Based on the current literature, it can be concluded that high job demands and low job control are predictors of poor sleep quality. More high-quality research is needed to examine the possible causal relationship between these and other psychosocial work characteristics with sleep quality, in addition to research focusing on reversed and reciprocal relations.

Working Paper 5: American High Schools; Some Organizational Characteristics and Factors Related to Teacher Satisfaction, Counselor Satisfaction, and the Quality of Counseling Programs. Interim Report.

ERIC Educational Resources Information Center

Johnston, Lloyd D.; And Others

This working paper is the fifth in a series on Youth in Transition. Included are four papers plus comments on these papers. The findings are based on information gathered from approximately 2,000 high school teachers and 300 counselors. The teachers' and counselors' perceptions of the way our high schools are run and the impact of those schools on…

Supporting High Quality Teacher-Child Interactions in Pre-K Mathematics

ERIC Educational Resources Information Center

McGuire, Patrick

2010-01-01

The purpose of this three-paper manuscript dissertation is to add value to the limited knowledge base of research surrounding the quality of teacher-child interactions in pre-k mathematics contexts. The first paper, based on an extensive review of literature, presents a theoretical basis for using five-frames to support children's development of…

Efforts To Solve Quality Problems. Background Paper No. 36.

ERIC Educational Resources Information Center

Smith, Michael J.; And Others

Producing goods and services of high quality is not expensive, but correcting poor quality costs U.S. companies as much as 20 percent of sales revenues annually. One survey reported that only 1 out of 300 U.S. companies involved management and engineering staff in quality training. The tendency is to have a quality control department, separate…

The Nature of Spontaneity in High Quality Mathematics Learning Experiences

ERIC Educational Resources Information Center

Williams, Gaye

2004-01-01

Spontaneity has been linked to high quality learning experiences in mathematics (Csikszentmihalyi & Csikszentmihalyi, 1992; Williams, 2002).This paper shows how spontaneity can be identified by attending to the nature of social elements in the process of abstracting (Dreyfus, Hershkowitz, & Schwarz, 2001). This process is elaborated…

[Analysis on quality of articles published in Chinese Acupuncture and Moxibustion from 2000 to 2006].

PubMed

Chen, Wen; Huang, Juan; Huang, Ai-ming

2008-01-01

To understand the quality of the papers issued in Chinese Acupuncture and Moxibustion in past 7 years, so as to provide reference for its development. Analyze information quality of the papers based on the treatises issued in Chinese Acupuncture and Moxibustion between 2000-2006. (1) Most of the authors come from medical schools and their affiliated hospitals (including scientific research units), accounting for 61. 0%; (2) Authors of each paper mainly range between 2-3 persons, accounting for 40.0%; (3) There are 405 papers with support of funds (mainly from provincial and ministerial funds) in the 7 years, accounting for 26. 2% of the total number of the papers; (4) Publication delay shortens annually, averaging 255. 3 days in the past 7 years and 210.5 days in 2006; (5) RCT papers of clinical researches account for 30.4% and show a raising tendency year by year. Chinese Acupuncture and Moxibustion has considerable advantages in the above-mentioned four aspects, showing the high quality of "key periodical", but the proportion of RCT papers still needs to be further increased.

How Effective are Mindfulness-Based Interventions for Reducing Stress Among Healthcare Professionals? A Systematic Review and Meta-Analysis.

PubMed

Burton, Amy; Burgess, Catherine; Dean, Sarah; Koutsopoulou, Gina Z; Hugh-Jones, Siobhan

2017-02-01

Workplace stress is high among healthcare professionals (HCPs) and is associated with reduced psychological health, quality of care and patient satisfaction. This systematic review and meta-analysis reviews evidence on the effectiveness of mindfulness-based interventions (MBIs) for reducing stress in HCPs. A systematic literature search was conducted. Papers were screened for suitability using inclusion criteria and nine papers were subjected to review and quality assessment. Seven papers, for which full statistical findings could be obtained, were also subjected to meta-analysis. Results of the meta-analysis suggest that MBIs have the potential to significantly improve stress among HCPs; however, there was evidence of a file drawer problem. The quality of the studies was high in relation to the clarity of aims, data collection and analysis, but weaker in terms of sample size and the use of theoretical frameworks. MBIs have the potential to reduce stress among HCPs; however, more high-quality research is needed before this finding can be confirmed. Future studies would benefit from long-term follow-up measures to determine any continuing effects of mindfulness training on stress outcomes. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Shaping Performance: Do International Accreditations and Quality Management Really Help?

ERIC Educational Resources Information Center

Nigsch, Stefano; Schenker-Wicki, Andrea

2013-01-01

In recent years, international accreditations have become an important form of quality management for business schools all over the world. However, given their high costs and the risk of increasing bureaucratisation and control, accreditations remain highly disputed in academia. This paper uses quantitative data to assess whether accreditations…

Learning Disabilities and Achieving High-Quality Education Standards

ERIC Educational Resources Information Center

Gartland, Debi; Strosnider, Roberta

2017-01-01

This is an official document of the National Joint Committee on Learning Disabilities (NJCLD), of which Council for Learning Disabilities is a long-standing, active member. With this position paper, NJCLD advocates for the implementation of high-quality education standards (HQES) for students with learning disabilities (LD) and outlines the…

Educational Evaluation and Assessment in the United States. Position Paper and Recommendations for Action.

ERIC Educational Resources Information Center

Council of Chief State School Officers, Washington, DC.

The lack of high quality data to describe and monitor U.S. educational systems hampers reform decisions and will impair reform evaluation. This paper sets forth the Council of Chief State School Officers' (CCSSO) recommendations for the Council and federal, state, and local education agencies to help improve the quality of educational indicators.…

Pao's Selection Method for Quality Papers and the Subsequent Use of Medical Literature

ERIC Educational Resources Information Center

Boyce, Bert; Primov, Karen

1977-01-01

Pao's "quality filter" selection method is re-examined as to its effectiveness in selecting papers that not only are of use to medical educators but to researchers as well. It is concluded that the method does provide the librarian with a tool for forming a highly selective bibliography in a particular medical literature without need for…

A Comparative Study of Paper-and-Pen versus Computer-Delivered Assessment Modes on Students' Writing Quality: A Singapore Study

ERIC Educational Resources Information Center

Cheung, Yin Ling

2016-01-01

Much research has been conducted to investigate the quality of writing and high-level revisions in word processing-assisted and pen-and-paper writing modes. Studies that address cognitive aspects, such as experience and comfort with computers, by which students compose essays during writing assessments have remained relatively unexplored. To fill…

Patterns, Trends and Policy Implications of Private Spending on Skills Development in Mexico and the United States

ERIC Educational Resources Information Center

Székely, Miguel; Mendoza, Pamela

2017-01-01

This paper explores families' investment in skills development through education in a high-inequality, low-education quality country such as Mexico, comparing it to a lower-inequality, higher-quality education country such as the United States. The paper uses a series of Household Income and Expenditure Surveys for both countries spanning around…

Animal models for studying homeopathy and high dilutions: conceptual critical review.

PubMed

Bonamin, Leoni Villano; Endler, Peter Christian

2010-01-01

This is a systematic review of the animal models used in studies of high dilutions. The objectives are to analyze methodological quality of papers and reported results, and to highlight key conceptual aspects of high dilution to suggest clues concerning putative mechanisms of action. Papers for inclusion were identified systematically, from the Pubmed-Medline database, using 'Homeopathy' and 'Animal' as keywords. Only original full papers in English published between January 1999 and June 2009 were included, reviews, scientific reports, thesis, older papers, papers extracted from Medline using similar keywords, papers about mixed commercial formulas and books were also considered for discussion only. 31 papers describing 33 experiments were identified for the main analysis and a total of 89 items cited. Systematic analysis of the selected papers yielded evidence of some important intrinsic features of high dilution studies performed in animal models: a) methodological quality was generally adequate, some aspects could be improved; b) convergence between results and materia medica is seen in some studies, pointing toward to the possibility of systematic study of the Similia principle c) both isopathic and Similia models seem useful to understand some complex biological phenomena, such as parasite-host interactions; d) the effects of high dilutions seem to stimulate restoration of a 'stable state', as seen in several experimental models from both descriptive and mathematical points of view. Copyright 2009 The Faculty of Homeopathy. Published by Elsevier Ltd. All rights reserved.

What Is Quality Preschool? Fact Sheet

ERIC Educational Resources Information Center

Advocates for Children of New Jersey, 2010

2010-01-01

Children need quality early learning programs. This can be a child care center, a preschool or a Head Start program. Not all early learning programs provide the high quality children need. This paper presents questions that should be considered when looking for an early learning program.

Know Your Epidemic, Strengthen Your Response: Developing a New HIV Surveillance Architecture to Guide HIV Resource Allocation and Target Decisions

PubMed Central

Sanchez, Travis; Baral, Stefan; Mee, Paul; Sabin, Keith; Garcia-Calleja, Jesus M; Hargreaves, James

2018-01-01

To guide HIV prevention and treatment activities up to 2020, we need to generate and make better use of high quality HIV surveillance data. To highlight our surveillance needs, a special collection of papers in JMIR Public Health and Surveillance has been released under the title “Improving Global and National Responses to the HIV Epidemic Through High Quality HIV Surveillance Data.” We provide a summary of these papers and highlight methods for developing a new HIV surveillance architecture. PMID:29444766

Food production and service in UK hospitals.

PubMed

Ahmed, Mohamed; Jones, Eleri; Redmond, Elizabeth; Hewedi, Mahmoud; Wingert, Andreas; Gad El Rab, Mohamed

2015-01-01

The purpose of this paper is to apply value stream mapping holistically to hospital food production/service systems focused on high-quality food. Multiple embedded case study of three (two private-sector and one public-sector) hospitals in the UK. The results indicated various issues affecting hospital food production including: the menu and nutritional considerations; food procurement; food production; foodservice; patient perceptions/expectations. Value stream mapping is a new approach for food production systems in UK hospitals whether private or public hospitals. The paper identifies opportunities for enhancing hospital food production systems. The paper provides a theoretical basis for process enhancement of hospital food production and the provision of high-quality hospital food.

Measuring the Impact of High Quality Instant Feedback on Learning

ERIC Educational Resources Information Center

Nutbrown, Stephen; Higgins, Colin; Beesley, Su

2016-01-01

This paper examines the impact of a novel assessment technique that has been used to improve the feedback given to second year Computer Science students at the University of Nottingham. Criteria for effective, high quality feedback are discussed. An automated marking system (The Marker's Apprentice--TMA) produces instant feedback in synergy with…

Assuring Quality in Large-Scale Online Course Development

ERIC Educational Resources Information Center

Parscal, Tina; Riemer, Deborah

2010-01-01

Student demand for online education requires colleges and universities to rapidly expand the number of courses and programs offered online while maintaining high quality. This paper outlines two universities respective processes to assure quality in large-scale online programs that integrate instructional design, eBook custom publishing, Quality…

Teaching Quality Object-Oriented Programming

ERIC Educational Resources Information Center

Feldman, Yishai A.

2005-01-01

Computer science students need to learn how to write high-quality software. An important methodology for achieving quality is design-by-contract, in which code is developed together with its specification, which is given as class invariants and method pre- and postconditions. This paper describes practical experience in teaching design-by-contract…

Comparing Alternative Instruments to Measure Service Quality in Higher Education

ERIC Educational Resources Information Center

Brochado, Ana

2009-01-01

Purpose: The purpose of this paper is to examine the performance of five alternative measures of service quality in the high education sector--service quality (SERVQUAL), importance-weighted SERVQUAL, service performance (SERVPERF), importance-weighted SERVPERF, and higher education performance (HEdPERF). Design/methodology/approach: Data were…

[Current situation and existing problems of acupuncture for primary hypertension].

PubMed

Zhang, Lili; Wei, Pengfei; Chen, Shaozong

2018-03-12

To analyze the present situation and existing problems of acupuncture for primary hypertension (PH) based on clinical research literature in recent 20 years. The clinical research literature regarding acupuncture for PH were searched from China National Knowledge Infrastructure (CNKI), VIP data network (VIP) and Wanfang database from 1997 through 2016; a total of 218 papers met the inclusive criteria. Microsoft Excel and Apriori algorithm of SPSS Clementine software were applied to analyze the data. The main acupoints of acupuncture for PH were Taichong (LR 3), Quchi (LI 11), Zusanli (ST 36) and Hegu (LI 4), but its support degree was only 12.21%. 127 papers were randomized controlled trials, accounting for 58.26%. 158 papers had clear diagnostic criteria, accounting for 72.48%. 138 papers had clear efficacy evaluation criteria, accounting for 63.30%. Only 5.05% of the papers were classified as high-quality literature by using Jadad scale. In recent 20 years, some rules existed in acupoint selection for PH, but the support degree was low so it could not accurately guide clinical treatment. Although the clinical literature quality of acupuncture for PH was gradually increasing, the proportion of high-quality literature was low, therefore modern medical research model and foreign similar research should be followed to design a more rigorous trial protocol. As a result, the quality of clinical research is increased to provide reference for future clinical treatment.

Statistical quality control through overall vibration analysis

NASA Astrophysics Data System (ADS)

Carnero, M. ^a. Carmen; González-Palma, Rafael; Almorza, David; Mayorga, Pedro; López-Escobar, Carlos

2010-05-01

The present study introduces the concept of statistical quality control in automotive wheel bearings manufacturing processes. Defects on products under analysis can have a direct influence on passengers' safety and comfort. At present, the use of vibration analysis on machine tools for quality control purposes is not very extensive in manufacturing facilities. Noise and vibration are common quality problems in bearings. These failure modes likely occur under certain operating conditions and do not require high vibration amplitudes but relate to certain vibration frequencies. The vibration frequencies are affected by the type of surface problems (chattering) of ball races that are generated through grinding processes. The purpose of this paper is to identify grinding process variables that affect the quality of bearings by using statistical principles in the field of machine tools. In addition, an evaluation of the quality results of the finished parts under different combinations of process variables is assessed. This paper intends to establish the foundations to predict the quality of the products through the analysis of self-induced vibrations during the contact between the grinding wheel and the parts. To achieve this goal, the overall self-induced vibration readings under different combinations of process variables are analysed using statistical tools. The analysis of data and design of experiments follows a classical approach, considering all potential interactions between variables. The analysis of data is conducted through analysis of variance (ANOVA) for data sets that meet normality and homoscedasticity criteria. This paper utilizes different statistical tools to support the conclusions such as chi squared, Shapiro-Wilks, symmetry, Kurtosis, Cochran, Hartlett, and Hartley and Krushal-Wallis. The analysis presented is the starting point to extend the use of predictive techniques (vibration analysis) for quality control. This paper demonstrates the existence of predictive variables (high-frequency vibration displacements) that are sensible to the processes setup and the quality of the products obtained. Based on the result of this overall vibration analysis, a second paper will analyse self-induced vibration spectrums in order to define limit vibration bands, controllable every cycle or connected to permanent vibration-monitoring systems able to adjust sensible process variables identified by ANOVA, once the vibration readings exceed established quality limits.

Light Weight MP3 Watermarking Method for Mobile Terminals

NASA Astrophysics Data System (ADS)

Takagi, Koichi; Sakazawa, Shigeyuki; Takishima, Yasuhiro

This paper proposes a novel MP3 watermarking method which is applicable to a mobile terminal with limited computational resources. Considering that in most cases the embedded information is copyright information or metadata, which should be extracted before playing back audio contents, the watermark detection process should be executed at high speed. However, when conventional methods are used with a mobile terminal, it takes a considerable amount of time to detect a digital watermark. This paper focuses on scalefactor manipulation to enable high speed watermark embedding/detection for MP3 audio and also proposes the manipulation method which minimizes audio quality degradation adaptively. Evaluation tests showed that the proposed method is capable of embedding 3 bits/frame information without degrading audio quality and detecting it at very high speed. Finally, this paper describes application examples for authentication with a digital signature.

[Analysis of articles published in Chinese Journal of Burns winning high citation rate during 2000-2009].

PubMed

Mo, Yu; Luo, Qin; Wang, Xu; Xie, Qiu-hong

2010-06-01

To analyze the inherent quality of articles published in our journal enjoying high citation rate, and to explore strategies on improving impact of papers. Scientific papers published in Chinese Journal of Burns from February 2000 to December 2009, with citation rate equal to or higher than 20 times were collected for classification according to their publication year, publication form, subject distribution, regional and institutional distribution, frequency of authors appeared in those published papers, frequency of winning prizes, and sources of fund (national, ministerial, or provincial). Data were processed by Microsoft Excel software. Altogether 64 scientific papers with high citation rate were published from 2000 to 2006. Original articles and expert forum accounted for 55 (86.0%). Twenty-one articles of clinical study were cited frequently, among them one was cited for 79 times. Articles dealing with subjects with popular interest or cutting-edge problems were cited frequently. Most articles winning high citation rate were originated from institutions located in Chongqing, Beijing, Shanghai, and Xi'an, etc. Those scientific papers which were instructed by specialists, with high level foundation and won prizes were cited with high frequency. The top 20 articles were mainly cited by excellent doctoral dissertations and master theses originated from 11 institutions for higher education, and source journals of Chinese Scientific and Technical Papers and Citations Database. Authors should emphasize subject planning in order to compose papers with high quality. The editorial board should make arrangements with influential specialists with related skills for their contributions based on subjects of popular interest concerning the cutting-edge problems of the specific specialty, and pay close attention to papers on clinical study and those with funding from high levels, to improve impact of the articles.

A low-power and high-quality implementation of the discrete cosine transformation

NASA Astrophysics Data System (ADS)

Heyne, B.; Götze, J.

2007-06-01

In this paper a computationally efficient and high-quality preserving DCT architecture is presented. It is obtained by optimizing the Loeffler DCT based on the Cordic algorithm. The computational complexity is reduced from 11 multiply and 29 add operations (Loeffler DCT) to 38 add and 16 shift operations (which is similar to the complexity of the binDCT). The experimental results show that the proposed DCT algorithm not only reduces the computational complexity significantly, but also retains the good transformation quality of the Loeffler DCT. Therefore, the proposed Cordic based Loeffler DCT is especially suited for low-power and high-quality CODECs in battery-based systems.

Data quality control and tools in passive seismic experiments exemplified on the Czech broadband seismic pool MOBNET in the AlpArray collaborative project

NASA Astrophysics Data System (ADS)

Vecsey, Luděk; Plomerová, Jaroslava; Jedlička, Petr; Munzarová, Helena; Babuška, Vladislav; AlpArray Working Group

2017-12-01

This paper focuses on major issues related to the data reliability and network performance of 20 broadband (BB) stations of the Czech (CZ) MOBNET (MOBile NETwork) seismic pool within the AlpArray seismic experiments. Currently used high-resolution seismological applications require high-quality data recorded for a sufficiently long time interval at seismological observatories and during the entire time of operation of the temporary stations. In this paper we present new hardware and software tools we have been developing during the last two decades while analysing data from several international passive experiments. The new tools help to assure the high-quality standard of broadband seismic data and eliminate potential errors before supplying data to seismological centres. Special attention is paid to crucial issues like the detection of sensor misorientation, timing problems, interchange of record components and/or their polarity reversal, sensor mass centring, or anomalous channel amplitudes due to, for example, imperfect gain. Thorough data quality control should represent an integral constituent of seismic data recording, preprocessing, and archiving, especially for data from temporary stations in passive seismic experiments. Large international seismic experiments require enormous efforts from scientists from different countries and institutions to gather hundreds of stations to be deployed in the field during a limited time period. In this paper, we demonstrate the beneficial effects of the procedures we have developed for acquiring a reliable large set of high-quality data from each group participating in field experiments. The presented tools can be applied manually or automatically on data from any seismic network.

Cultivating an Inclusive Individuality: Critical Reflections on the Idea of Quality Education in Contemporary China

ERIC Educational Resources Information Center

Zhang, Huajun

2010-01-01

Quality education reform in China gives high importance to developing the individual's full potential. However, the education system is dominated by a kind of exclusive competitiveness in which high stakes examinations shape the learning process. This paper seeks to bring a philosophical perspective regarding the disjunction between the intent of…

Recruiting High Quality Students through a Fifth Year Program: It Can Be Done.

ERIC Educational Resources Information Center

James, Terry L.; And Others

This paper describes the process of recruiting high quality liberal arts graduates into teacher preparation programs at Memphis State University, Tennessee. The two graduate programs, the Master of Arts in Teaching and the Lyndhurst, both require full-time attendance, have lock-step delivery systems and extended internships, and are intensive. In…

Limnology of Jagatpur wetland, Bhagalpur (Bihar), India.

PubMed

Kumar, Brajnandan

2011-10-01

The water quality in Jagatpur wetland was assessed in terms of physico - chemical characteristics for two years, between August 2003-July 2005. The variations in different physico-chemical parameters have been discussed in this paper in relation to fluctuating climatic condition. The wetland is experiencing racing eutrophication as evidenced by pH was acidic to alkaline, total hardness was considerably high, bicarbonate was in moderate amount, phosphate-phosphorus content was in a range of medium to high and higher values of COD. The present status of the quality of water of Jagatpur wetland is delineated in this paper.

Statistical Properties of Differences between Low and High Resolution CMAQ Runs with Matched Initial and Boundary Conditions

EPA Science Inventory

The difficulty in assessing errors in numerical models of air quality is a major obstacle to improving their ability to predict and retrospectively map air quality. In this paper, using simulation outputs from the Community Multi-scale Air Quality Model (CMAQ), the statistic...

Relational Resources of a University as a Source of Education Quality Assurance

ERIC Educational Resources Information Center

Bagdasaryan, Irina; Vasilyeva, Zoya; Almabekova, Olga

2015-01-01

This paper considers high quality educational services provided by a university being the highest priority and assumes relational resources as valuable sources that can facilitate and enhance quality assurance. Each university with a unique resource base is connected with a variety of entities--other universities, non-profit and for-profit…

Data on the descriptive overview and the quality assessment details of 12 qualitative research papers.

PubMed

Barnabishvili, Maia; Ulrichs, Timo; Waldherr, Ruth

2016-09-01

This data article presents the supplementary material for the review paper "Role of acceptability barriers in delayed diagnosis of Tuberculosis: Literature review from high burden countries" (Barnabishvili et al., in press) [1]. General overview of 12 qualitative papers, including the details about authors, years of publication, data source locations, study objectives, overview of methods, study population characteristics, as well as the details of intervention and the outcome parameters of the papers are summarized in the first two tables included to the article. Quality assessment process of the methodological strength of 12 papers and the results of the critical appraisal are further described and summarized in the second part of the article.

A Systematic Review Evaluating the Effect of Vitamin B6 on Semen Quality.

PubMed

Banihani, Saleem Ali

2017-12-30

This review systematically discusses and summarizes the effect of vitamin B6 on semen quality. To achieve this contribution, we searched the PubMed, Scopus, and Web of Science databases for English language papers from 1984 through 2017 using the key words "sperm" versus "Vitamin B6", "pyridoxine", and "pyridoxal". Also, the references from selected published papers were included, only if relevant. To date, as revealed by rodent studies, high doses of vitamin B6 impair semen quality and sperm parameters. While in humans, it is suggested, but not yet directly approved, that seminal vitamin B6 levels may alter sperm quality (i.e., sperm quantity and quality), and that vitamin B6 deficiency may trigger the chemical toxicity to sperm (i.e., hyperhomocysteinemia, oxidative injury). The adverse effect of vitamin B6, when used at high doses, has been revealed in experimental animals, but not yet directly approved in humans. Consequently, in vitro studies on human ejaculate as well as clinical studies that investigate the direct effect of vitamin B6 on semen quality seem very significant.

Better Data Quality for Better Healthcare Research Results - A Case Study.

PubMed

Hart, Robert; Kuo, Mu-Hsing

2017-01-01

Electronic Health Records (EHRs) have been identified as a key tool to collect data for healthcare research. However, EHR data must be of sufficient quality to support quality research results. Island Health, BC, Canada has invested and continues to invest in the development of solutions to address the quality of its EHR data and support high quality healthcare studies. This paper examines Island Health's data quality engine, its development and its successful implementation.

A no-reference image and video visual quality metric based on machine learning

NASA Astrophysics Data System (ADS)

Frantc, Vladimir; Voronin, Viacheslav; Semenishchev, Evgenii; Minkin, Maxim; Delov, Aliy

2018-04-01

The paper presents a novel visual quality metric for lossy compressed video quality assessment. High degree of correlation with subjective estimations of quality is due to using of a convolutional neural network trained on a large amount of pairs video sequence-subjective quality score. We demonstrate how our predicted no-reference quality metric correlates with qualitative opinion in a human observer study. Results are shown on the EVVQ dataset with comparison existing approaches.

Maximizing coupling-efficiency of high-power diode lasers utilizing hybrid assembly technology

NASA Astrophysics Data System (ADS)

Zontar, D.; Dogan, M.; Fulghum, S.; Müller, T.; Haag, S.; Brecher, C.

2015-03-01

In this paper, we present hybrid assembly technology to maximize coupling efficiency for spatially combined laser systems. High quality components, such as center-turned focusing units, as well as suitable assembly strategies are necessary to obtain highest possible output ratios. Alignment strategies are challenging tasks due to their complexity and sensitivity. Especially in low-volume production fully automated systems are economically at a disadvantage, as operator experience is often expensive. However reproducibility and quality of automatically assembled systems can be superior. Therefore automated and manual assembly techniques are combined to obtain high coupling efficiency while preserving maximum flexibility. The paper will describe necessary equipment and software to enable hybrid assembly processes. Micromanipulator technology with high step-resolution and six degrees of freedom provide a large number of possible evaluation points. Automated algorithms are necess ary to speed-up data gathering and alignment to efficiently utilize available granularity for manual assembly processes. Furthermore, an engineering environment is presented to enable rapid prototyping of automation tasks with simultaneous data ev aluation. Integration with simulation environments, e.g. Zemax, allows the verification of assembly strategies in advance. Data driven decision making ensures constant high quality, documents the assembly process and is a basis for further improvement. The hybrid assembly technology has been applied on several applications for efficiencies above 80% and will be discussed in this paper. High level coupling efficiency has been achieved with minimized assembly as a result of semi-automated alignment. This paper will focus on hybrid automation for optimizing and attaching turning mirrors and collimation lenses.

Quality of nursing care perceived by patients and their nurses: an application of the critical incident technique. Part 2.

PubMed

Redfern, S; Norman, I

1999-07-01

The aims of the study were to identify indicators of quality of nursing care from the perceptions of patients and nurses, and to determine the congruence between patients' and nurses' perceptions. The paper is presented in two parts. Part 1 included the background and methods to the study and the findings from the comparison of patients' and nurses' perceptions. Part 2 describes the perceptions of patients and nurses, and draws conclusions drawn from the study as a whole. Patients and nurses in hospital wards were interviewed using the critical incident technique. We grouped 4546 indicators of high and low quality nursing care generated from the interview transcripts into 316 subcategories, 68 categories and 31 themes. The themes were grouped into eight clusters: therapeutic context for care, attitudes and sensitivity, teaching and leadership, motivation to nurse, monitoring and informing, high-dependency care, efficiency and thoroughness, reflection and anticipation. As shown in Part 1 of the paper, congruence between patients' and nurses' perceptions of quality was high and significant, although there was some difference of emphasis. The findings support an emerging theory of interpersonal competence and quality in nursing care.

Identifying well-formed biomedical phrases in MEDLINE® text.

PubMed

Kim, Won; Yeganova, Lana; Comeau, Donald C; Wilbur, W John

2012-12-01

In the modern world people frequently interact with retrieval systems to satisfy their information needs. Humanly understandable well-formed phrases represent a crucial interface between humans and the web, and the ability to index and search with such phrases is beneficial for human-web interactions. In this paper we consider the problem of identifying humanly understandable, well formed, and high quality biomedical phrases in MEDLINE documents. The main approaches used previously for detecting such phrases are syntactic, statistical, and a hybrid approach combining these two. In this paper we propose a supervised learning approach for identifying high quality phrases. First we obtain a set of known well-formed useful phrases from an existing source and label these phrases as positive. We then extract from MEDLINE a large set of multiword strings that do not contain stop words or punctuation. We believe this unlabeled set contains many well-formed phrases. Our goal is to identify these additional high quality phrases. We examine various feature combinations and several machine learning strategies designed to solve this problem. A proper choice of machine learning methods and features identifies in the large collection strings that are likely to be high quality phrases. We evaluate our approach by making human judgments on multiword strings extracted from MEDLINE using our methods. We find that over 85% of such extracted phrase candidates are humanly judged to be of high quality. Published by Elsevier Inc.

Improving the Quality of Protein Crystals Using Stirring Crystallization

NASA Astrophysics Data System (ADS)

Adachi, Hiroaki; Matsumura, Hiroyoshi; Niino, Ai; Takano, Kazufumi; Kinoshita, Takayoshi; Warizaya, Masaichi; Inoue, Tsuyoshi; Mori, Yusuke; Sasaki, Takatomo

2004-04-01

Recent reports state that a high magnetic field improves the crystal quality of bovine adenosine deaminase (ADA) with an inhibitor [Kinoshita et al.: Acta Cryst. D59 (2003) 1333]. In this paper, we examine the effect of stirring solution on ADA crystallization using a vapor-diffusion technique with rotary and figure-eight motion shakers. The probability of obtaining high-quality crystals is increased with stirring in a figure-eight pattern. Furthermore, rotary stirring greatly increased the probability of obtaining high-quality crystals, however, nucleation time was also increased. The crystal structure with the inhibitor was determined at a high resolution using a crystal obtained from a stirred solution. These results indicate that stirring with simple equipment is as useful as the high magnetic field technique for protein crystallization.

High Quality Differentiated Instruction--A Checklist for Teacher Professional Development on Handling Differences in the General Education Classroom

ERIC Educational Resources Information Center

Smets, Wouter

2017-01-01

This paper presents a checklist that scaffolds teachers' professional decision-making with regard to differentiated instruction. It discusses the way the concept of differentiated instruction may be applied in an evidence-informed way by presenting a checklist for high-quality differentiated instruction (DI). We tried to tackle the question of how…

Gathering Feedback for Teaching: Combining High-Quality Observations with Student Surveys and Achievement Gains. Research Paper. MET Project

ERIC Educational Resources Information Center

Kane, Thomas J.; Staiger, Douglas O.

2012-01-01

There is a growing consensus that teacher evaluation in the United States is fundamentally broken. Few would argue that a system that tells 98 percent of teachers they are "satisfactory" benefits anyone--including teachers. The nation's collective failure to invest in high-quality professional feedback to teachers is inconsistent with…

The use of ion beam cleaning to obtain high quality cold welds with minimal deformation

NASA Technical Reports Server (NTRS)

Sater, B. L.; Moore, T. J.

1978-01-01

This paper describes a variation of cold welding which utilizes an ion beam to clean mating surfaces prior to joining in a vacuum environment. High quality solid state welds were produced with minimal deformation. Due to experimental fixture limitation in applying pressure work has been limited to a few low yield strength materials.

Production of high-quality polydisperse construction mixes for additive 3D technologies.

NASA Astrophysics Data System (ADS)

Gerasimov, M. D.; Brazhnik, Yu V.; Gorshkov, P. S.; Latyshev, S. S.

2018-03-01

The paper describes a new design of a mixer allowing production of high quality polydisperse powders, used in additive 3D technologies. A new principle of dry powder particle mixing is considered, implementing a possibility of a close-to-ideal distribution of such particles in common space. A mathematical model of the mixer is presented, allowing evaluating quality indicators of the produced mixture. Experimental results are shown and rational values of process parameters of the mixer are obtained.

Quality Function Deployment for Large Systems

NASA Technical Reports Server (NTRS)

Dean, Edwin B.

1992-01-01

Quality Function Deployment (QFD) is typically applied to small subsystems. This paper describes efforts to extend QFD to large scale systems. It links QFD to the system engineering process, the concurrent engineering process, the robust design process, and the costing process. The effect is to generate a tightly linked project management process of high dimensionality which flushes out issues early to provide a high quality, low cost, and, hence, competitive product. A pre-QFD matrix linking customers to customer desires is described.

Implementing Educational Policies in Swaziland. World Bank Discussion Papers No. 88. Africa Technical Department Series.

ERIC Educational Resources Information Center

Magalula, Cisco

At the time of independence in 1968, education in Swaziland was characterized by poor quality, uneven distribution of schools, high dropout and repeater rates, serious shortages of teachers, and inappropriate and highly academic curricula. This paper describes the status of present-day education in Swaziland in terms of the effect of government…

A Study of Innovative Entrepreneurial Talents of Business and Management: Knowledge, Ability and Quality Structure

ERIC Educational Resources Information Center

Chen, Yurong; Wang, Wenhua

2011-01-01

It has been an urgent mission for universities and institutes to instruct the students with enterprise knowledge and cultivate high quality entrepreneurial talents with innovation. The paper discusses the knowledge, ability and quality structure of talents of economics and administration with a purpose to achieve the goal of innovative…

Expediting the Quest for Quality: The Role of IQAC in Academic Audit

ERIC Educational Resources Information Center

Nitonde, Rohidas

2016-01-01

Academic Audit is an important tool to control and maintain standards in academic sector. It has been found highly relevant by the experts across the world. Academic audit helps institutions to introspect and improve their quality. The present paper intends to probe into the possible role of Internal Quality Assurance Cell (IQAC) in Academic Audit…

Building Quality Foundations: Indicators and Instruments to Measure the Quality of Vocational Education and Training

ERIC Educational Resources Information Center

Coates, Hamish

2009-01-01

Vocational education and training plays a major and increasing role in developing the knowledge and skills that underpin Australia's economy and society. It is vital, accordingly, that training outcomes are of high quality. This paper reports work undertaken to develop a new evidence-based and outcomes-focused national approach to monitoring and…

Measuring Educational Quality by Appraising Theses and Dissertations: Pitfalls and Remedies

ERIC Educational Resources Information Center

Hamilton, Patti; Johnson, Robert; Poudrier, Chelsey

2010-01-01

In this paper, we argue that, as indicators of the educational quality of graduate degree programs, student theses and dissertations are best used in specific contexts. High-quality theses and dissertations, that is, may be the result of factors such as verbal skills students already possessed at admission or of complex interactions between…

Evaluating the Labour Government's English NHS health system reforms: the 2008 Darzi reforms.

PubMed

Mays, Nicholas

2013-10-01

Starting in 2002, the UK Labour Government of 1997-2010 introduced a series of changes to the National Health Service (NHS) in England designed to increase patients' choices of the place of elective hospital care and encourage competition among public and private providers of elective hospital services for NHS-funded patients. In 2006, the Department of Health initiated the Health Reform Evaluation Programme (HREP) to assess the impact of the changes. In June 2008, the White Paper, High quality care for all, was published. It represented the government's desire to focus the next phase of health care system reform in England as much on the quality of care as on improving its responsiveness and efficiency. The 2008 White Paper led to the commissioning of a further wave of evaluative research under the auspices of HREP, as follows: an evaluation of the implementation and outcomes of care planning for people with long-term conditions; an evaluation of the personal health budget pilots; an evaluation of the implementation and outcomes of the Commissioning for Quality and Innovation (CQUIN) framework; and an evaluation of cultural and behavioural change in the NHS focused on ensuring high quality care for all. This Supplement includes papers from each project. The evaluations present a mixed picture of the impact and success of the 2008 reforms. All the studies identify some limitations of the policies in the White Paper. The introduction of personal health budgets appears to have been the least problematic and, depending on assumptions, likely to be cost-effective for the sorts of patients involved in the pilot. For the rest of the changes, impacts ranged from little or none (CQUIN and care planning for people with chronic conditions) to patchy and highly variable (instilling a culture of quality in acute hospitals) in the three years following the publication of the White Paper. On the other hand, each of the studies identifies important insights relevant to modifying and improving the policies. These findings have continuing relevance since both the 2008 White Paper's policies, and the issues they were focused on remedying, remain central to the current Coalition Government's reform agenda.

In-situ quality monitoring during laser brazing

NASA Astrophysics Data System (ADS)

Ungers, Michael; Fecker, Daniel; Frank, Sascha; Donst, Dmitri; Märgner, Volker; Abels, Peter; Kaierle, Stefan

Laser brazing of zinc coated steel is a widely established manufacturing process in the automotive sector, where high quality requirements must be fulfilled. The strength, impermeablitiy and surface appearance of the joint are particularly important for judging its quality. The development of an on-line quality control system is highly desired by the industry. This paper presents recent works on the development of such a system, which consists of two cameras operating in different spectral ranges. For the evaluation of the system, seam imperfections are created artificially during experiments. Finally image processing algorithms for monitoring process parameters based the captured images are presented.

On-line welding quality inspection system for steel pipe based on machine vision

NASA Astrophysics Data System (ADS)

Yang, Yang

2017-05-01

In recent years, high frequency welding has been widely used in production because of its advantages of simplicity, reliability and high quality. In the production process, how to effectively control the weld penetration welding, ensure full penetration, weld uniform, so as to ensure the welding quality is to solve the problem of the present stage, it is an important research field in the field of welding technology. In this paper, based on the study of some methods of welding inspection, a set of on-line welding quality inspection system based on machine vision is designed.

Optical coherence tomography as an accurate inspection and quality evaluation technique in paper industry

NASA Astrophysics Data System (ADS)

Prykäri, Tuukka; Czajkowski, Jakub; Alarousu, Erkki; Myllylä, Risto

2010-05-01

Optical coherence tomography (OCT), a technique for the noninvasive imaging of turbid media, based on low-coherence interferometry, was originally developed for the imaging of biological tissues. Since the development of the technique, most of its applications have been related to the area of biomedicine. However, from early stages, the vertical resolution of the technique has already been improved to a submicron scale. This enables new possibilities and applications. This article presents the possible applications of OCT in paper industry, where submicron or at least a resolution close to one micron is required. This requirement comes from the layered structure of paper products, where layer thickness may vary from single microns to tens of micrometers. This is especially similar to the case with high-quality paper products, where several different coating layers are used to obtain a smooth surface structure and a high gloss. In this study, we demonstrate that optical coherence tomography can be used to measure and evaluate the quality of the coating layer of a premium glossy photopaper. In addition, we show that for some paper products, it is possible to measure across the entire thickness range of a paper sheet. Furthermore, we suggest that in addition to topography and tomography images of objects, it is possible to obtain information similar to gloss by tracking the magnitude of individual interference signals in optical coherence tomography.

The emerging High Efficiency Video Coding standard (HEVC)

NASA Astrophysics Data System (ADS)

Raja, Gulistan; Khan, Awais

2013-12-01

High definition video (HDV) is becoming popular day by day. This paper describes the performance analysis of latest upcoming video standard known as High Efficiency Video Coding (HEVC). HEVC is designed to fulfil all the requirements for future high definition videos. In this paper, three configurations (intra only, low delay and random access) of HEVC are analyzed using various 480p, 720p and 1080p high definition test video sequences. Simulation results show the superior objective and subjective quality of HEVC.

Quality Analysis of Open Street Map Data

NASA Astrophysics Data System (ADS)

Wang, M.; Li, Q.; Hu, Q.; Zhou, M.

2013-05-01

Crowd sourcing geographic data is an opensource geographic data which is contributed by lots of non-professionals and provided to the public. The typical crowd sourcing geographic data contains GPS track data like OpenStreetMap, collaborative map data like Wikimapia, social websites like Twitter and Facebook, POI signed by Jiepang user and so on. These data will provide canonical geographic information for pubic after treatment. As compared with conventional geographic data collection and update method, the crowd sourcing geographic data from the non-professional has characteristics or advantages of large data volume, high currency, abundance information and low cost and becomes a research hotspot of international geographic information science in the recent years. Large volume crowd sourcing geographic data with high currency provides a new solution for geospatial database updating while it need to solve the quality problem of crowd sourcing geographic data obtained from the non-professionals. In this paper, a quality analysis model for OpenStreetMap crowd sourcing geographic data is proposed. Firstly, a quality analysis framework is designed based on data characteristic analysis of OSM data. Secondly, a quality assessment model for OSM data by three different quality elements: completeness, thematic accuracy and positional accuracy is presented. Finally, take the OSM data of Wuhan for instance, the paper analyses and assesses the quality of OSM data with 2011 version of navigation map for reference. The result shows that the high-level roads and urban traffic network of OSM data has a high positional accuracy and completeness so that these OSM data can be used for updating of urban road network database.

Developing and Implementing Inquiry-Based, Water Quality Laboratory Experiments for High School Students to Explore Real Environmental Issues Using Analytical Chemistry

ERIC Educational Resources Information Center

Mandler, Daphna; Blonder, Ron; Yayon, Malka; Mamlok-Naaman, Rachel; Hofstein, Avi

2014-01-01

This paper describes the rationale and the implementation of five laboratory experiments; four of them, intended for high-school students, are inquiry-based activities that explore the quality of water. The context of water provides students with an opportunity to study the importance of analytical methods and how they influence our everyday…

Engagement, Alignment, and Rigor as Vital Signs of High-Quality Instruction: A Classroom Visit Protocol for Instructional Improvement and Research

ERIC Educational Resources Information Center

Early, Diane M.; Rogge, Ronald D.; Deci, Edward L.

2014-01-01

This paper investigates engagement (E), alignment (A), and rigor (R) as vital signs of high-quality teacher instruction as measured by the EAR Classroom Visit Protocol, designed by the Institute for Research and Reform in Education (IRRE). Findings indicated that both school leaders and outside raters could learn to score the protocol with…

Educating Faculty Members on the Importance of Requiring High-Quality Information Resources at a Community College

ERIC Educational Resources Information Center

Auten, Beth; Glauner, Dana; Lefoe, Grant; Henry, Jo

2016-01-01

This article explains how the South Piedmont Community College librarians educated faculty members about how they guide student use of the library and how it is advantageous for them to require high-quality resources for student papers. As documented by observations at SPCC and in the library literature, students use the tools they know to find…

Making Pre-Kindergarten Work for Low-Income Working Families. CLASP Child Care and Early Education Series. Policy Paper No. 1

ERIC Educational Resources Information Center

Schumacher, Rachel; Hamm, Katie; Ewen, Danielle

2007-01-01

A growing number of state leaders believe that it is essential to expand high-quality early learning and development opportunities for all young children before they reach kindergarten. A key component of this strategy is providing access to voluntary, high-quality pre-kindergarten programs, especially for low-income children. Over the last few…

Water quality monitoring for high-priority water bodies in the Sonoran Desert network

Treesearch

Terry W. Sprouse; Robert M. Emanuel; Sara A. Strorrer

2005-01-01

This paper describes a network monitoring program for “high priority” water bodies in the Sonoran Desert Network of the National Park Service. Protocols were developed for monitoring selected waters for ten of the eleven parks in the Network. Park and network staff assisted in identifying potential locations of testing sites, local priorities, and how water quality...

Comparison of laser regimes for stamp cleaning

NASA Astrophysics Data System (ADS)

Radvan, Roxana N.; Dan, Suzana; Popovici, Nicoleta; Striber, J.; Savastru, Dan; Savastru, Roxana

2001-10-01

This paper presents a comparative study of the laser cleaning regimes applied to colored substrates with various chromatic characteristics, including colored paper and printed paper with different dpi (dots per inch) values. Tests are done under microscope with high precision techniques, using controlled Nd:YAG laser. The wavelength preponderantly used in the experiments is the Nd:YAG fundamental regime (1064 nm). Parallel experiments at 532 nm have been developed on difficult cases, or when the results were not satisfactory with 1064 nm. The main part of the work presents some results on stamp cleaning. Experimental results indicate that cleaning efficiency is correlated with the color of substrate, age of the ink on the stamp, color quality and paper quality.

Use of Terrestrial Laser Scanning Technology for Long Term High Precision Deformation Monitoring

PubMed Central

Vezočnik, Rok; Ambrožič, Tomaž; Sterle, Oskar; Bilban, Gregor; Pfeifer, Norbert; Stopar, Bojan

2009-01-01

The paper presents a new methodology for high precision monitoring of deformations with a long term perspective using terrestrial laser scanning technology. In order to solve the problem of a stable reference system and to assure the high quality of possible position changes of point clouds, scanning is integrated with two complementary surveying techniques, i.e., high quality static GNSS positioning and precise tacheometry. The case study object where the proposed methodology was tested is a high pressure underground pipeline situated in an area which is geologically unstable. PMID:22303152

ECONOMICS OF SAMPLE COMPOSITING AS A SCREENING TOOL IN GROUND WATER QUALITY MONITORING

EPA Science Inventory

Recent advances in high throughput/automated compositing with robotics/field-screening methods offer seldom-tapped opportunities for achieving cost-reduction in ground water quality monitoring programs. n economic framework is presented in this paper for the evaluation of sample ...

Promoting Leadership in Doctoral Programs in Mathematics Education

ERIC Educational Resources Information Center

Reys, Robert

2013-01-01

Mathematics educators have many different opportunities to reflect leadership throughout their careers. High quality doctoral programs provide a rich and stimulating environment that supports the development of leadership qualities. This paper describes some ways that leadership can be fostered in doctoral programs in mathematics education.

A green method of diaphragm spring's anti-rusting with high quality and efficiency

NASA Astrophysics Data System (ADS)

Huang, Xinming; Hua, Wenlin

2017-10-01

This paper introduces a green method of diaphragm spring's anti-rusting, which is of high quality, high efficiency and low consumption. It transforms the phosphating way of anti-rusting to physical anti-rusting that directly coat anti-rusting oil on the surface of the spring, and transforms the manual-oiling or oil-immersion to fully-automatically ultrasonic oiling. Hence, this method will completely change the way of diaphgragm spring's anti-rusting.

Broken Gears: The Value Added of Higher Education on Teachers' Academic Achievement. Policy Research Working Paper 7168

ERIC Educational Resources Information Center

Balcázar, Carlos Felipe; Ñopo, Hugo

2015-01-01

Good teachers are essential for high-quality educational systems. However, little is known about teachers' skills formation during college. By combining two standardized tests for Colombian students, one taken at the end of senior year in high school and the other when students are near graduation from college, this paper documents the extent to…

An ultrasonic system for determining papaya physiological properties

NASA Astrophysics Data System (ADS)

Ibrahim, Sallehuddin; Ramli, Azlin; Yunus, Mohd Amri Md

2015-05-01

There is an increasing need for high quality fruit. As such it is important to have a fast, accurate and reliable method for measuring and monitoring the quality of fruit from the field to the consumer. This paper presents an investigation on the use of a non-destructive ultrasonic system which can be used to measure the quality of papaya.

Expanding Access to Quality Pre-K Is Sound Public Policy

ERIC Educational Resources Information Center

Barnett, W. Steven

2013-01-01

In 2013, preschool education received more attention in the media and public policy circles than it has for some time, in part because of a series of high-profile proposals to expand access to quality pre-K. The scientific basis for these proposed expansions of quality pre-K is impressive. This paper brings to bear the full weight of the evidence…

Strategies to avoid the loss of developmental potential in more than 200 million children in the developing world.

PubMed

Engle, Patrice L; Black, Maureen M; Behrman, Jere R; Cabral de Mello, Meena; Gertler, Paul J; Kapiriri, Lydia; Martorell, Reynaldo; Young, Mary Eming

2007-01-20

This paper is the third in the Child Development Series. The first paper showed that more than 200 million children under 5 years of age in developing countries do not reach their developmental potential. The second paper identified four well-documented risks: stunting, iodine deficiency, iron deficiency anaemia, and inadequate cognitive stimulation, plus four potential risks based on epidemiological evidence: maternal depression, violence exposure, environmental contamination, and malaria. This paper assesses strategies to promote child development and to prevent or ameliorate the loss of developmental potential. The most effective early child development programmes provide direct learning experiences to children and families, are targeted toward younger and disadvantaged children, are of longer duration, high quality, and high intensity, and are integrated with family support, health, nutrition, or educational systems and services. Despite convincing evidence, programme coverage is low. To achieve the Millennium Development Goals of reducing poverty and ensuring primary school completion for both girls and boys, governments and civil society should consider expanding high quality, cost-effective early child development programmes.

[Informatics data quality and management].

PubMed

Feng, Rung-Chuang

2009-06-01

While the quality of data affects every aspect of business, it is frequently overlooked in terms of customer data integration, data warehousing, business intelligence and enterprise applications. Regardless of which data terms are used, a high level of data quality is a critical base condition essential to satisfy user needs and facilitate the development of effective applications. In this paper, the author introduces methods, a management framework and the major factors involved in data quality assessment. Author also integrates expert opinions to develop data quality assessment tools.

MapEdit: solution to continuous raster map creation

NASA Astrophysics Data System (ADS)

Rančić, Dejan; Djordjevi-Kajan, Slobodanka

2003-03-01

The paper describes MapEdit, MS Windows TM software for georeferencing and rectification of scanned paper maps. The software produces continuous raster maps which can be used as background in geographical information systems. Process of continuous raster map creation using MapEdit "mosaicking" function is also described as well as the georeferencing and rectification algorithms which are used in MapEdit. Our approach for georeferencing and rectification using four control points and two linear transformations for each scanned map part, together with nearest neighbor resampling method, represents low cost—high speed solution that produce continuous raster maps with satisfactory quality for many purposes (±1 pixel). Quality assessment of several continuous raster maps at different scales that have been created using our software and methodology, has been undertaken and results are presented in the paper. For the quality control of the produced raster maps we referred to three wide adopted standards: US Standard for Digital Cartographic Data, National Standard for Spatial Data Accuracy and US National Map Accuracy Standard. The results obtained during the quality assessment process are given in the paper and show that our maps meat all three standards.

Measuring patient safety in a UK dental hospital: development of a dental clinical effectiveness dashboard.

PubMed

Pemberton, M N; Ashley, M P; Shaw, A; Dickson, S; Saksena, A

2014-10-01

Patient safety is an important marker of quality for any healthcare organisation. In 2008, the British Government white paper entitled High quality care for all, resulting from a review led by Lord Darzi, identified patient safety as a key component of quality and discussed how it might be measured, analysed and acted upon. National and local clinically curated metrics were suggested, which could be displayed via a 'clinical dashboard'. This paper explains the development of a clinical effectiveness dashboard focused on patient safety in an English dental hospital and how it has helped us identify relevant patient safety issues in secondary dental care.

Degrees of systematic thoroughness: A text analysis of student technical science writing

NASA Astrophysics Data System (ADS)

Esch, Catherine Julia

This dissertation investigates student technical science writing and use of evidence. Student writers attended a writing-intensive undergraduate university oceanography course where they were required to write a technical paper drawing from an instructor-designed software program, Our Dynamic Planet. This software includes multiple interactive geological data sets relevant to plate tectonics. Through qualitative text analysis of students science writing, two research questions frame the study asking: How are the papers textually structured? Are there distinctions between high- and low-rated papers? General and specific text characteristics within three critical sections of the technical paper are identified and analyzed (Observations, Interpretations, Conclusions). Specific text characteristics consist of typical types of figures displayed in the papers, and typical statements within each paper section. Data gathering consisted of collecting 15 student papers which constitute the population of study. An analytical method was designed to manage and analyze the text characteristics. It has three stages: identifying coding categories, re-formulating the categories, and configuring categories. Three important elements emerged that identified notable distinctions in paper quality: data display and use, narration of complex geological feature relationships, and overall organization of text structure. An inter-rater coding concordance check was conducted, and showed high concordance ratios for the coding of each section: Observations = 0.95; Interpretations = 0.93; and Conclusions = 0.87. These categories collectively reveal a larger pattern of general differences in the paper quality levels (high, low, medium). This variation in the quality of papers demonstrates degrees of systematic thoroughness, which is defined as how systematically each student engages in the tasks of the assignment, and how thoroughly and consistently the student follows through on that systematic commitment. Characterizations of each paper level indicate areas that can be explored to develop an explicit instructional pedagogy to support a greater number of low and medium level students. Implications suggest most students require greater explicit instruction. This involves having students pay more attention to detail, and to demonstrate greater follow through in order to produce a solid scientific argument in their technical papers.

Quality measurement in physician-staffed emergency medical services: a systematic literature review.

PubMed

Haugland, Helge; Uleberg, Oddvar; Klepstad, Pål; Krüger, Andreas; Rehn, Marius

2018-05-15

Quality measurement of physician-staffed emergency medical services (P-EMS) is necessary to improve service quality. Knowledge and consensus on this topic are scarce, making quality measurement of P-EMS a high-priority research area. The aim of this review was to identify, describe and evaluate studies of quality measurement in P-EMS. The databases of MEDLINE and Embase were searched initially, followed by a search for included article citations in Scopus. The study eligibility criteria were: (1) articles describing the use of one quality indicator (QI) or more in P-EMS, (2) original manuscripts, (3) articles published from 1 January 1968 until 5 October 2016. The literature search identified 4699 records. 4543 were excluded after reviewing title and abstract. An additional 129 were excluded based on a full-text review. The remaining 27 papers were included in the analysis. Methodological quality was assessed using an adapted critical appraisal tool. The description of used QIs and methods of quality measurement was extracted. Variables describing the involved P-EMSs were extracted as well. In the included papers, a common understanding of which QIs to use in P-EMS did not exist. Fifteen papers used only a single QI. The most widely used QIs were 'Adherence to medical protocols', 'Provision of advanced interventions', 'Response time' and 'Adverse events'. The review demonstrated a lack of shared understanding of which QIs to use in P-EMS. Moreover, papers using only one QI dominated the literature, thus increasing the risk of a narrow perspective in quality measurement. Future quality measurement in P-EMS should rely on a set of consensus-based QIs, ensuring a comprehensive approach to quality measurement.

A comparative trial of paper-and-pencil versus computer administration of the Quality of Life in Reflux and Dyspepsia (QOLRAD) questionnaire.

PubMed

Kleinman, L; Leidy, N K; Crawley, J; Bonomi, A; Schoenfeld, P

2001-02-01

Although most health-related quality of life questionnaires are self-administered by means of paper and pencil, new technologies for automated computer administration are becoming more readily available. Novel methods of instrument administration must be assessed for score equivalence in addition to consistency in reliability and validity. The present study compared the psychometric characteristics (score equivalence and structure, internal consistency, and reproducibility reliability and construct validity) of the Quality of Life in Reflux And Dyspepsia (QOLRAD) questionnaire when self-administered by means of paper and pencil versus touch-screen computer. The influence of age, education, and prior experience with computers on score equivalence was also examined. This crossover trial randomized 134 patients with gastroesophageal reflux disease to 1 of 2 groups: paper-and-pencil questionnaire administration followed by computer administration or computer administration followed by use of paper and pencil. To minimize learning effects and respondent fatigue, administrations were scheduled 3 days apart. A random sample of 32 patients participated in a 1-week reproducibility evaluation of the computer-administered QOLRAD. QOLRAD scores were equivalent across the 2 methods of administration regardless of subject age, education, and prior computer use. Internal consistency levels were very high (alpha = 0.93-0.99). Interscale correlations were strong and generally consistent across methods (r = 0.7-0.87). Correlations between the QOLRAD and Short Form 36 (SF-36) were high, with no significant differences by method. Test-retest reliability of the computer-administered QOLRAD was also very high (ICC = 0.93-0.96). Results of the present study suggest that the QOLRAD is reliable and valid when self-administered by means of computer touch-screen or paper and pencil.

High-Quality Draft Genome Sequences of Four Lignocellulose-Degrading Bacteria Isolated from Puerto Rican Forest Soil: Gordonia sp., Paenibacillus sp., Variovorax sp., and Vogesella sp.

DOE PAGES

Woo, Hannah L.; DeAngelis, Kristen M.; Teshima, Hazuki; ...

2017-05-04

In this paper, we report the high-quality draft genome sequences of four phylogenetically diverse lignocellulose-degrading bacteria isolated from tropical soil ( Gordonia sp., Paenibacillus sp., Variovorax sp., and Vogesella sp.) to elucidate the genetic basis of their ability to degrade lignocellulose. These isolates may provide novel enzymes for biofuel production.

High-Quality Draft Genome Sequences of Four Lignocellulose-Degrading Bacteria Isolated from Puerto Rican Forest Soil: Gordonia sp., Paenibacillus sp., Variovorax sp., and Vogesella sp.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Woo, Hannah L.; DeAngelis, Kristen M.; Teshima, Hazuki

In this paper, we report the high-quality draft genome sequences of four phylogenetically diverse lignocellulose-degrading bacteria isolated from tropical soil ( Gordonia sp., Paenibacillus sp., Variovorax sp., and Vogesella sp.) to elucidate the genetic basis of their ability to degrade lignocellulose. These isolates may provide novel enzymes for biofuel production.

EDITORIAL: Are higher quality papers cited more often? Are higher quality papers cited more often?

NASA Astrophysics Data System (ADS)

Patterson, Michael S.; Harris, Simon

2009-09-01

Most researchers are aware of the increasing emphasis placed on citations as an indicator of quality by their colleagues, as well as by administrators and librarians. But is it true that high quality papers are cited more often? In what we believe to be the only previous publication to examine this question, West and McIlwaine (2002) selected 79 papers that had been published in the journal Addiction in 1997. These papers were rated by an assistant editor of the journal on a five-level quality scale (ranging from 'among the top 10%' to 'should not have been published') as well as a second 'blind' rater. The authors found that the number of citations to each paper from 1997 to 2000 did not correlate with the mean score of the two reviewers, the score assigned by the editors, or the score assigned by the blind referees. The peer-review system used by Physics in Medicine and Biology (PMB) facilitates a larger, prospective study with much less effort. In general, two reviewers are asked to assign each paper a score of 1 to 10 in each of three categories: originality, soundness and significance. The total scores (out of 30) are averaged and on this basis manuscripts are given a quality rating from Q1 (highest quality) to Q5. In a paper recently published in Scientometrics (Patterson and Harris 2009), we compared the number of citations to papers published in PMB in 2003, 2004 and 2005 to the mean quality rating assigned by the reviewers. In total, data were analyzed for 1095 published papers. For each year we found that there was a low but statistically robust correlation between citations and quality rating: for 2003, -0.227 (p < 0.001); for 2004, -0.238 (p < 0.001), and for 2005, -0.154 (p < 0.01). The low correlation means that it is not possible to predict the citation frequency of an individual paper with accuracy but, as a group, the highest ranked papers were cited about twice as often as the average for all published papers. We also examined the data retrospectively by dividing the papers published in each year into five citation quintiles. A paper of the highest quality (Q1) was about ten times more likely to be found in the most-cited quintile than in the least-cited. While it is reassuring to find that the best papers in PMB are, indeed, cited more often on average, we cannot discount the hypothesis that both measures might be influenced by an extrinsic factor, such as the reputation of the authors. We suggest that a study similar to ours be performed for a journal that utilizes a system of double-blind peer review. Michael S Patterson Editorial Board Member Simon Harris Publisher References West R and McIlwaine A 2002 What do citation counts count for in the field of addiction? An empirical evaluation of citation counts and their link with peer ratings of quality Addiction 97 501-4 Patterson M S and Harris S 2009 The relationship between reviewers' quality-scores and number of citations for papers published in the journal Physics in Medicine and Biology from 2003-2005 Scientometrics 80 343-9

A Procedure for High Resolution Satellite Imagery Quality Assessment

PubMed Central

Crespi, Mattia; De Vendictis, Laura

2009-01-01

Data products generated from High Resolution Satellite Imagery (HRSI) are routinely evaluated during the so-called in-orbit test period, in order to verify if their quality fits the desired features and, if necessary, to obtain the image correction parameters to be used at the ground processing center. Nevertheless, it is often useful to have tools to evaluate image quality also at the final user level. Image quality is defined by some parameters, such as the radiometric resolution and its accuracy, represented by the noise level, and the geometric resolution and sharpness, described by the Modulation Transfer Function (MTF). This paper proposes a procedure to evaluate these image quality parameters; the procedure was implemented in a suitable software and tested on high resolution imagery acquired by the QuickBird, WorldView-1 and Cartosat-1 satellites. PMID:22412312

Data governance in predictive toxicology: A review.

PubMed

Fu, Xin; Wojak, Anna; Neagu, Daniel; Ridley, Mick; Travis, Kim

2011-07-13

Due to recent advances in data storage and sharing for further data processing in predictive toxicology, there is an increasing need for flexible data representations, secure and consistent data curation and automated data quality checking. Toxicity prediction involves multidisciplinary data. There are hundreds of collections of chemical, biological and toxicological data that are widely dispersed, mostly in the open literature, professional research bodies and commercial companies. In order to better manage and make full use of such large amount of toxicity data, there is a trend to develop functionalities aiming towards data governance in predictive toxicology to formalise a set of processes to guarantee high data quality and better data management. In this paper, data quality mainly refers in a data storage sense (e.g. accuracy, completeness and integrity) and not in a toxicological sense (e.g. the quality of experimental results). This paper reviews seven widely used predictive toxicology data sources and applications, with a particular focus on their data governance aspects, including: data accuracy, data completeness, data integrity, metadata and its management, data availability and data authorisation. This review reveals the current problems (e.g. lack of systematic and standard measures of data quality) and desirable needs (e.g. better management and further use of captured metadata and the development of flexible multi-level user access authorisation schemas) of predictive toxicology data sources development. The analytical results will help to address a significant gap in toxicology data quality assessment and lead to the development of novel frameworks for predictive toxicology data and model governance. While the discussed public data sources are well developed, there nevertheless remain some gaps in the development of a data governance framework to support predictive toxicology. In this paper, data governance is identified as the new challenge in predictive toxicology, and a good use of it may provide a promising framework for developing high quality and easy accessible toxicity data repositories. This paper also identifies important research directions that require further investigation in this area.

Data governance in predictive toxicology: A review

PubMed Central

2011-01-01

Background Due to recent advances in data storage and sharing for further data processing in predictive toxicology, there is an increasing need for flexible data representations, secure and consistent data curation and automated data quality checking. Toxicity prediction involves multidisciplinary data. There are hundreds of collections of chemical, biological and toxicological data that are widely dispersed, mostly in the open literature, professional research bodies and commercial companies. In order to better manage and make full use of such large amount of toxicity data, there is a trend to develop functionalities aiming towards data governance in predictive toxicology to formalise a set of processes to guarantee high data quality and better data management. In this paper, data quality mainly refers in a data storage sense (e.g. accuracy, completeness and integrity) and not in a toxicological sense (e.g. the quality of experimental results). Results This paper reviews seven widely used predictive toxicology data sources and applications, with a particular focus on their data governance aspects, including: data accuracy, data completeness, data integrity, metadata and its management, data availability and data authorisation. This review reveals the current problems (e.g. lack of systematic and standard measures of data quality) and desirable needs (e.g. better management and further use of captured metadata and the development of flexible multi-level user access authorisation schemas) of predictive toxicology data sources development. The analytical results will help to address a significant gap in toxicology data quality assessment and lead to the development of novel frameworks for predictive toxicology data and model governance. Conclusions While the discussed public data sources are well developed, there nevertheless remain some gaps in the development of a data governance framework to support predictive toxicology. In this paper, data governance is identified as the new challenge in predictive toxicology, and a good use of it may provide a promising framework for developing high quality and easy accessible toxicity data repositories. This paper also identifies important research directions that require further investigation in this area. PMID:21752279

An interactive Doppler velocity dealiasing scheme

NASA Astrophysics Data System (ADS)

Pan, Jiawen; Chen, Qi; Wei, Ming; Gao, Li

2009-10-01

Doppler weather radars are capable of providing high quality wind data at a high spatial and temporal resolution. However, operational application of Doppler velocity data from weather radars is hampered by the infamous limitation of the velocity ambiguity. This paper reviews the cause of velocity folding and presents the unfolding method recently implemented for the CINRAD systems. A simple interactive method for velocity data, which corrects de-aliasing errors, has been developed and tested. It is concluded that the algorithm is very efficient and produces high quality velocity data.

[Qualitative Research in Health Services Research - Discussion Paper, Part 3: Quality of Qualitative Research].

PubMed

Stamer, M; Güthlin, C; Holmberg, C; Karbach, U; Patzelt, C; Meyer, T

2015-12-01

The third and final discussion paper of the German Network of Health Services Research's (DNVF) "Qualitative Methods Working Group" demonstrates methods for the evaluation and quality of qualitative research in health services research. In this paper we discuss approaches described in evaluating qualitative studies, including: an orientation to the general principles of empirical research, an approach-specific course of action, as well as procedures based on the research-process and criteria-oriented approaches. Divided into general and specific aspects to be considered in a qualitative study quality evaluation, the central focus of the discussion paper undertakes an extensive examination of the process and criteria-oriented approaches. The general aspects include the participation of relevant groups in the research process as well as ethical aspects of the research and data protection issues. The more specific aspects in evaluating the quality of qualitative research include considerations about the research interest, research questions, and the selection of data collection methods and types of analyses. The formulated questions are intended to guide reviewers and researchers to evaluate and to develop qualitative research projects appropriately. The intention of this discussion paper is to ensure a transparent research culture, and to reflect on and discuss the methodological and research approach of qualitative studies in health services research. With this paper we aim to initiate a discussion on high quality evaluation of qualitative health services research. © Georg Thieme Verlag KG Stuttgart · New York.

The effect of image quality, repeated study, and assessment method on anatomy learning.

PubMed

Fenesi, Barbara; Mackinnon, Chelsea; Cheng, Lucia; Kim, Joseph A; Wainman, Bruce C

2017-06-01

The use of two-dimensional (2D) images is consistently used to prepare anatomy students for handling real specimen. This study examined whether the quality of 2D images is a critical component in anatomy learning. The visual clarity and consistency of 2D anatomical images was systematically manipulated to produce low-quality and high-quality images of the human hand and human eye. On day 0, participants learned about each anatomical specimen from paper booklets using either low-quality or high-quality images, and then completed a comprehension test using either 2D images or three-dimensional (3D) cadaveric specimens. On day 1, participants relearned each booklet, and on day 2 participants completed a final comprehension test using either 2D images or 3D cadaveric specimens. The effect of image quality on learning varied according to anatomical content, with high-quality images having a greater effect on improving learning of hand anatomy than eye anatomy (high-quality vs. low-quality for hand anatomy P = 0.018; high-quality vs. low-quality for eye anatomy P = 0.247). Also, the benefit of high-quality images on hand anatomy learning was restricted to performance on short-answer (SA) questions immediately after learning (high-quality vs. low-quality on SA questions P = 0.018), but did not apply to performance on multiple-choice (MC) questions (high-quality vs. low-quality on MC questions P = 0.109) or after participants had an additional learning opportunity (24 hours later) with anatomy content (high vs. low on SA questions P = 0.643). This study underscores the limited impact of image quality on anatomy learning, and questions whether investment in enhancing image quality of learning aids significantly promotes knowledge development. Anat Sci Educ 10: 249-261. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

Quest for Quality. Proceedings of National Research Conference on Human Resource Development (College Station, Texas, April 22-24, 1993).

ERIC Educational Resources Information Center

Mathis, Laura, Ed.; Mizer, Kaye, Ed.

Papers on the theme of quality in human resource development include the following: "Missing Link to Quality: An Examination of the Use of Steven Covey's '7 Habits of Highly Effective People' in State Agencies" (Adair et al.); "Executive Women in Business in the United States" (Bierema); "Extent and Nature of Employee Initiated Learning in the…

Memory preservation made prestigious but easy

NASA Astrophysics Data System (ADS)

Fageth, Reiner; Debus, Christina; Sandhaus, Philipp

2011-01-01

Preserving memories combined with story-telling using either photo books for multiple images or high quality products such as one or a few images printed on canvas or images mounted on acryl to create high-quality wall decorations are gradually becoming more popular than classical 4*6 prints and classical silver halide posters. Digital printing via electro photography and ink jet is increasingly replacing classical silver halide technology as the dominant production technology for these kinds of products. Maintaining a consistent and comparable quality of output is becoming more challenging than using silver halide paper for both, prints and posters. This paper describes a unique approach of combining both desktop based software to initiate a compelling project and the use of online capabilities in order to finalize and optimize that project in an online environment in a community process. A comparison of the consumer behavior between online and desktop based solutions for generating photo books will be presented.

Oriented modulation for watermarking in direct binary search halftone images.

PubMed

Guo, Jing-Ming; Su, Chang-Cheng; Liu, Yun-Fu; Lee, Hua; Lee, Jiann-Der

2012-09-01

In this paper, a halftoning-based watermarking method is presented. This method enables high pixel-depth watermark embedding, while maintaining high image quality. This technique is capable of embedding watermarks with pixel depths up to 3 bits without causing prominent degradation to the image quality. To achieve high image quality, the parallel oriented high-efficient direct binary search (DBS) halftoning is selected to be integrated with the proposed orientation modulation (OM) method. The OM method utilizes different halftone texture orientations to carry different watermark data. In the decoder, the least-mean-square-trained filters are applied for feature extraction from watermarked images in the frequency domain, and the naïve Bayes classifier is used to analyze the extracted features and ultimately to decode the watermark data. Experimental results show that the DBS-based OM encoding method maintains a high degree of image quality and realizes the processing efficiency and robustness to be adapted in printing applications.

Characterization of non-conductive materials using field emission scanning electron microscopy

NASA Astrophysics Data System (ADS)

Cao, Cong; Gao, Ran; Shang, Huayan; Peng, Tingting

2016-01-01

With the development of science and technology, field emission scanning electron microscope (FESEM) plays an important role in nano-material measurements because of its advantages of high magnification, high resolution and easy operation. A high-quality secondary electron image is a significant prerequisite for accurate and precise length measurements. In order to obtain high-quality secondary electron images, the conventional treatment method for non-conductive materials is coating conductive films with gold, carbon or platinum to reduce charging effects, but this method will cover real micro structures of materials, change the sample composition properties and meanwhile introduce a relatively big error to nano-scale microstructure measurements. This paper discusses how to reduce or eliminate the impact of charging effects on image quality to the greatest extent by changing working conditions, such as voltage, stage bias, scanning mode and so on without treatment of coating, to obtain real and high-quality microstructure information of materials.

Non-Surgical Interventions for Adolescents with Idiopathic Scoliosis: An Overview of Systematic Reviews

PubMed Central

Płaszewski, Maciej; Bettany-Saltikov, Josette

2014-01-01

Background Non-surgical interventions for adolescents with idiopathic scoliosis remain highly controversial. Despite the publication of numerous reviews no explicit methodological evaluation of papers labeled as, or having a layout of, a systematic review, addressing this subject matter, is available. Objectives Analysis and comparison of the content, methodology, and evidence-base from systematic reviews regarding non-surgical interventions for adolescents with idiopathic scoliosis. Design Systematic overview of systematic reviews. Methods Articles meeting the minimal criteria for a systematic review, regarding any non-surgical intervention for adolescent idiopathic scoliosis, with any outcomes measured, were included. Multiple general and systematic review specific databases, guideline registries, reference lists and websites of institutions were searched. The AMSTAR tool was used to critically appraise the methodology, and the Oxford Centre for Evidence Based Medicine and the Joanna Briggs Institute’s hierarchies were applied to analyze the levels of evidence from included reviews. Results From 469 citations, twenty one papers were included for analysis. Five reviews assessed the effectiveness of scoliosis-specific exercise treatments, four assessed manual therapies, five evaluated bracing, four assessed different combinations of interventions, and one evaluated usual physical activity. Two reviews addressed the adverse effects of bracing. Two papers were high quality Cochrane reviews, Three were of moderate, and the remaining sixteen were of low or very low methodological quality. The level of evidence of these reviews ranged from 1 or 1+ to 4, and in some reviews, due to their low methodological quality and/or poor reporting, this could not be established. Conclusions Higher quality reviews indicate that generally there is insufficient evidence to make a judgment on whether non-surgical interventions in adolescent idiopathic scoliosis are effective. Papers labeled as systematic reviews need to be considered in terms of their methodological rigor; otherwise they may be mistakenly regarded as high quality sources of evidence. Protocol registry number CRD42013003538, PROSPERO PMID:25353954

Non-surgical interventions for adolescents with idiopathic scoliosis: an overview of systematic reviews.

PubMed

Płaszewski, Maciej; Bettany-Saltikov, Josette

2014-01-01

Non-surgical interventions for adolescents with idiopathic scoliosis remain highly controversial. Despite the publication of numerous reviews no explicit methodological evaluation of papers labeled as, or having a layout of, a systematic review, addressing this subject matter, is available. Analysis and comparison of the content, methodology, and evidence-base from systematic reviews regarding non-surgical interventions for adolescents with idiopathic scoliosis. Systematic overview of systematic reviews. Articles meeting the minimal criteria for a systematic review, regarding any non-surgical intervention for adolescent idiopathic scoliosis, with any outcomes measured, were included. Multiple general and systematic review specific databases, guideline registries, reference lists and websites of institutions were searched. The AMSTAR tool was used to critically appraise the methodology, and the Oxford Centre for Evidence Based Medicine and the Joanna Briggs Institute's hierarchies were applied to analyze the levels of evidence from included reviews. From 469 citations, twenty one papers were included for analysis. Five reviews assessed the effectiveness of scoliosis-specific exercise treatments, four assessed manual therapies, five evaluated bracing, four assessed different combinations of interventions, and one evaluated usual physical activity. Two reviews addressed the adverse effects of bracing. Two papers were high quality Cochrane reviews, Three were of moderate, and the remaining sixteen were of low or very low methodological quality. The level of evidence of these reviews ranged from 1 or 1+ to 4, and in some reviews, due to their low methodological quality and/or poor reporting, this could not be established. Higher quality reviews indicate that generally there is insufficient evidence to make a judgment on whether non-surgical interventions in adolescent idiopathic scoliosis are effective. Papers labeled as systematic reviews need to be considered in terms of their methodological rigor; otherwise they may be mistakenly regarded as high quality sources of evidence. CRD42013003538, PROSPERO.

How to do (or not to do)… Measuring health worker motivation in surveys in low- and middle-income countries

PubMed Central

Borghi, J; Lohmann, J; Dale, E; Meheus, F; Goudge, J; Oboirien, K; Kuwawenaruwa, A

2018-01-01

Abstract A health system’s ability to deliver quality health care depends on the availability of motivated health workers, which are insufficient in many low income settings. Increasing policy and researcher attention is directed towards understanding what drives health worker motivation and how different policy interventions affect motivation, as motivation is key to performance and quality of care outcomes. As a result, there is growing interest among researchers in measuring motivation within health worker surveys. However, there is currently limited guidance on how to conceptualize and approach measurement and how to validate or analyse motivation data collected from health worker surveys, resulting in inconsistent and sometimes poor quality measures. This paper begins by discussing how motivation can be conceptualized, then sets out the steps in developing questions to measure motivation within health worker surveys and in ensuring data quality through validity and reliability tests. The paper also discusses analysis of the resulting motivation measure/s. This paper aims to promote high quality research that will generate policy relevant and useful evidence. PMID:29165641

Education Policy-Making and Time

ERIC Educational Resources Information Center

Thompson, Greg; Cook, Ian

2014-01-01

This paper examines the global policy convergence toward high-stakes testing in schools and the use of test results to "steer at a distance", particularly as it applies to policy-makers' promise to improve teacher quality. Using Deleuze's three syntheses of time in the context of the Australian policy blueprint Quality Education, this…

Rating the Quality of Open Textbooks: How Reviewer and Text Characteristics Predict Ratings

ERIC Educational Resources Information Center

Fischer, Lane; Ernst, David; Mason, Stacie

2017-01-01

Using data collected from peer reviews for Open Textbook Library titles, this paper explores questions about rating the quality of open textbooks. The five research questions addressed the relationship between textbook and reviewer characteristics and ratings. Although reviewers gave textbooks high ratings generally, reviewers identified…

The Ecology of Infant Day Care.

ERIC Educational Resources Information Center

Elardo, Richard

This paper explores some of the attributed of quality day care programs for infants, age 0 to 30 months. High-quality interactions with adults result in positive developmental outcomes for infants. Adults involved in day care should focus on providing an environment of stimulating experiences, which help infants to develop satisfactorily. Other…

Getting a scientific paper published in Epilepsia: an editor's perspective.

PubMed

Schwartzkroin, Philip A

2013-11-01

Getting a paper published in Epilepsia depends first and foremost on the quality of the work reported, and on the clarity and convincingness of the presentation. Papers should focus on important and interesting topics with clearly stated objectives and goals. The observations and findings are of greatest interest when they are novel and change our views on the mechanisms and/or treatment of an epileptic disease. Studies should be carefully designed to include adequate sample size, comparison groups, and statistical analyses. Critically, the data must be clearly presented and appropriately interpreted. If followed, these recommendations will improve an author's chances of having his/her paper accepted in a high quality journal like Epilepsia. Wiley Periodicals, Inc. © 2013 International League Against Epilepsy.

Quality of care in reproductive health programmes: education for quality improvement.

PubMed

Kwast, B E

1998-09-01

The provision of high quality maternity care will make the difference between life and death or lifelong maiming for millions of pregnant women. Barriers preventing access to affordable, appropriate, acceptable and effective services, and lack of facilities providing high quality obstetric care result in about 1600 maternal deaths every day. Education in its broadest sense is required at all levels and sectors of society to enhance policy formulation that will strengthen programme commitment, improve services with a culturally sensitive approach and ensure appropriate delegation of responsibility to health staff at peripheral levels. This paper is the second in series of three which addresses quality of care. The first (Kwast 1998) contains an overview of concepts, assessments, barriers and improvements of quality of care. The third article will describe selected aspects of monitoring and evaluation of quality of care.

Printability of papers recycled from toner and inkjet-printed papers after deinking and recycling processes.

PubMed

Karademir, Arif; Aydemir, Cem; Tutak, Dogan; Aravamuthan, Raja

2018-04-01

In our contemporary world, while part of the fibers used in the paper industry is obtained from primary fibers such as wood and agricultural plants, the rest is obtained from secondary fibers from waste papers. To manufacture paper with high optical quality from fibers of recycled waste papers, these papers require deinking and bleaching of fibers at desired levels. High efficiency in removal of ink from paper mass during recycling, and hence deinkability, are especially crucial for the optical and printability quality of the ultimate manufactured paper. In the present study, deinkability and printability performance of digitally printed paper with toner or inkjet ink were compared for the postrecycling product. To that end, opaque 80 g/m 2 office paper was digitally printed under standard printing conditions with laser toner or inkjet ink; then these sheets of paper were deinked by a deinking process based on the INGEDE method 11 p. After the deinking operation, the optical properties of the obtained recycled handsheets were compared with unprinted (reference) paper. Then the recycled paper was printed on once again under the same conditions as before with inkjet and laser printers, to monitor and measure printing color change before and after recycling, and differences in color universe. Recycling and printing performances of water-based inkjet and toner-based laser printed paper were obtained. The outcomes for laser-printed recycled paper were better than those for inkjet-printed recycled paper. Compared for luminosity Y, brightness, CIE a* and CIE b* values, paper recycled from laser-printed paper exhibited higher value than paper recycled from inkjet-printed paper.

Quality of Life Theory I. The IQOL Theory: An Integrative Theory of the Global Quality of Life Concept

PubMed Central

Ventegodt, Soren; Merrick, Joav; Andersen, Niels Jorgen

2003-01-01

Quality of life (QOL) means a good life and we believe that a good life is the same as living a life with a high quality. This paper presents the theoretical and philosophical framework of the Danish Quality of Life Survey, and of the SEQOL, QOL5, and QOL1 questionnaires.The notion of a good life can be observed from subjective to the objective, where this spectrum incorporates a number of existing quality of life theories. We call this spectrum the integrative quality-of-life (IQOL) theory and discuss the following aspects in this paper: well being, satisfaction with life, happiness, meaning in life, the biological information system (“balance”), realizing life potential, fulfillment of needs, and objective factors.The philosophy of life outlined in this paper tries to measure the global quality of life with questions derived from the integrative theory of the quality of life. The IQOL theory is an overall theory or meta-theory encompassing eight more factual theories in a subjective-existential-objective spectrum. Other philosophies of life can stress other aspects of life, but by this notion of introducing such an existential depth into the health and social sciences, we believe to have taken a necessary step towards a new humility and respect for the richness and complexity of life. PMID:14570993

Editorial highlighting and highly cited papers

NASA Astrophysics Data System (ADS)

Antonoyiannakis, Manolis

Editorial highlighting-the process whereby journal editors select, at the time of publication, a small subset of papers that are ostensibly of higher quality, importance or interest-is by now a widespread practice among major scientific journal publishers. Depending on the venue, and the extent to which editorial resources are invested in the process, highlighted papers appear as News & Views, Research Highlights, Perspectives, Editors' Choice, IOP Select, Editors' Summary, Spotlight on Optics, Editors' Picks, Viewpoints, Synopses, Editors' Suggestions, etc. Here, we look at the relation between highlighted papers and highly influential papers, which we define at two levels: having received enough citations to be among the (i) top few percent of their journal, and (ii) top 1% of all physics papers. Using multiple linear regression and multilevel regression modeling we examine the parameters associated with highly influential papers. We briefly comment on cause and effect relationships between citedness and highlighting of papers.

75 FR 70201 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... Construction Taxes and Education Surcharges for FIEs;'' and (5) 3.51 percent under the ``Value Added-Tax and... Paper Industry;'' (2) 1.11 percent under ``Two Free, Three Half;'' (3) 1.38 percent under ``Income Tax...

3D absolute shape measurement of live rabbit hearts with a superfast two-frequency phase-shifting technique

PubMed Central

Wang, Yajun; Laughner, Jacob I.; Efimov, Igor R.; Zhang, Song

2013-01-01

This paper presents a two-frequency binary phase-shifting technique to measure three-dimensional (3D) absolute shape of beating rabbit hearts. Due to the low contrast of the cardiac surface, the projector and the camera must remain focused, which poses challenges for any existing binary method where the measurement accuracy is low. To conquer this challenge, this paper proposes to utilize the optimal pulse width modulation (OPWM) technique to generate high-frequency fringe patterns, and the error-diffusion dithering technique to produce low-frequency fringe patterns. Furthermore, this paper will show that fringe patterns produced with blue light provide the best quality measurements compared to fringe patterns generated with red or green light; and the minimum data acquisition speed for high quality measurements is around 800 Hz for a rabbit heart beating at 180 beats per minute. PMID:23482151

Nitrogen Plasma Optimization for High-Quality Dilute Nitrides

DTIC Science & Technology

2005-02-01

Available online 1 February 2005Abstract Growth of GaInNAs by molecular beam epitaxy (MBE) generally requires a nitrogen plasma, which complicates growth...InGaAs and InGaAsP lasers. This paper addresses several of the challenges of plasma-assisted molecular beam epitaxy (MBE) of high-quality dilute nitrides...A.L. Holmes, Using beam flux monitor as Langmuir probe for plasma-assisted molecular beam epitaxy , J. Vac. Sci. Technol. B, in press.

A systematic review on the composting of green waste: Feedstock quality and optimization strategies.

PubMed

Reyes-Torres, M; Oviedo-Ocaña, E R; Dominguez, I; Komilis, D; Sánchez, A

2018-04-27

Green waste (GW) is an important fraction of municipal solid waste (MSW). The composting of lignocellulosic GW is challenging due to its low decomposition rate. Recently, an increasing number of studies that include strategies to optimize GW composting appeared in the literature. This literature review focuses on the physicochemical quality of GW and on the effect of strategies used to improve the process and product quality. A systematic search was carried out, using keywords, and 447 papers published between 2002 and 2018 were identified. After a screening process, 41 papers addressing feedstock quality and 32 papers on optimization strategies were selected to be reviewed and analyzed in detail. The GW composition is highly variable due to the diversity of the source materials, the type of vegetation, and climatic conditions. This variability limits a strict categorization of the GW physicochemical characteristics. However, this research established that the predominant features of GW are a C/N ratio higher than 25, a deficit in important nutrients, namely nitrogen (0.5-1.5% db), phosphorous (0.1-0.2% db) and potassium (0.4-0.8% db) and a high content of recalcitrant organic compounds (e.g. lignin). The promising strategies to improve composting of GW were: i) GW particle size reduction (e.g. shredding and separation of GW fractions); ii) addition of energy amendments (e.g. non-refined sugar, phosphate rock, food waste, volatile ashes), bulking materials (e.g. biocarbon, wood chips), or microbial inoculum (e.g. fungal consortia); and iii) variations in operating parameters (aeration, temperature, and two-phase composting). These alternatives have successfully led to the reduction of process length and have managed to transform recalcitrant substances to a high-quality end-product. Copyright © 2018 Elsevier Ltd. All rights reserved.

Improving and monitoring air quality.

PubMed

DuPont, André

2018-05-01

Since the authorization of the Clean Air Act Amendments of 1990, the air quality in the USA has significantly improved because of strong public support. The lessons learned over the last 25 years are being shared with the policy analysts, technical professionals, and scientist who endeavor to improve air quality in their communities. This paper will review how the USA has achieved the "high" standard of air quality that was envisioned in the early 1990s. This document will describe SO 2 gas emission reduction technology and highlight operation of emission monitoring technology. This paper describes the basic process operation of an air pollution control scrubber. A technical review of measures required to operate and maintain a large-scale pollution control system will be described. Also, the author explains how quality assurance procedures in performance of continuous emission monitoring plays a significant role in reducing air pollution.

High-Alpha Handling Qualities Flight Research on the NASA F/A-18 High Alpha Research Vehicle

NASA Technical Reports Server (NTRS)

Wichman, Keith D.; Pahle, Joseph W.; Bahm, Catherine; Davidson, John B.; Bacon, Barton J.; Murphy, Patrick C.; Ostroff, Aaron J.; Hoffler, Keith D.

1996-01-01

A flight research study of high-angle-of-attack handling qualities has been conducted at the NASA Dryden Flight Research Center using the F/A-18 High Alpha Research Vehicle (HARV). The objectives were to create a high-angle-of-attack handling qualities flight database, develop appropriate research evaluation maneuvers, and evaluate high-angle-of-attack handling qualities guidelines and criteria. Using linear and nonlinear simulations and flight research data, the predictions from each criterion were compared with the pilot ratings and comments. Proposed high-angle-of-attack nonlinear design guidelines and proposed handling qualities criteria and guidelines developed using piloted simulation were considered. Recently formulated time-domain Neal-Smith guidelines were also considered for application to high-angle-of-attack maneuvering. Conventional envelope criteria were evaluated for possible extension to the high-angle-of-attack regime. Additionally, the maneuvers were studied as potential evaluation techniques, including a limited validation of the proposed standard evaluation maneuver set. This paper gives an overview of these research objectives through examples and summarizes result highlights. The maneuver development is described briefly, the criteria evaluation is emphasized with example results given, and a brief discussion of the database form and content is presented.

Recent developments in high-quality drying of vegetables, fruits, and aquatic products.

PubMed

Zhang, Min; Chen, Huizhi; Mujumdar, Arun S; Tang, Juming; Miao, Song; Wang, Yuchuan

2017-04-13

Fresh foods like vegetables, fruits, and aquatic products have high water activity and they are highly heat-sensitive and easily degradable. Dehydration is one of the most common methods used to improve food shelf-life. However, drying methods used for food dehydration must not only be efficient and economic but also yield high-quality products based on flavor, nutrients, color, rehydration, uniformity, appearance, and texture. This paper reviews some new drying technologies developed for dehydration of vegetables, fruits, and aquatic products. These include: infrared drying, microwave drying, radio frequency drying, electrohydrodynamic drying, etc., as well as hybrid drying methods combining two or more different drying techniques. A comprehensive review of recent developments in high-quality drying of vegetables, fruits and aquatic products is presented and recommendations are made for future research.

Two-beam combined 3.36  J, 100  Hz diode-pumped high beam quality Nd:YAG laser system.

PubMed

Qiu, J S; Tang, X X; Fan, Z W; Wang, H C; Liu, H

2016-07-20

In this paper, we develop a diode-pumped all-solid-state high-energy and high beam quality Nd:YAG laser system. A master oscillator power amplifier structure is used to provide a high pulse energy laser output with a high repetition rate. In order to decrease the amplifier working current so as to reduce the impact of the thermal effect on the beam quality, a beam splitting-amplifying-combining scheme is adopted. The energy extraction efficiency of the laser system is 50.68%. We achieve 3.36 J pulse energy at a 100 Hz repetition rate with a pulse duration of 7.1 ns, a far-field beam spot 1.71 times the diffraction limit, and 1.07% energy stability (RMS).

Launch vehicle systems design analysis

NASA Technical Reports Server (NTRS)

Ryan, Robert; Verderaime, V.

1993-01-01

Current launch vehicle design emphasis is on low life-cycle cost. This paper applies total quality management (TQM) principles to a conventional systems design analysis process to provide low-cost, high-reliability designs. Suggested TQM techniques include Steward's systems information flow matrix method, quality leverage principle, quality through robustness and function deployment, Pareto's principle, Pugh's selection and enhancement criteria, and other design process procedures. TQM quality performance at least-cost can be realized through competent concurrent engineering teams and brilliance of their technical leadership.

Diagnostic accuracy of scapular physical examination tests for shoulder disorders: a systematic review.

PubMed

Wright, Alexis A; Wassinger, Craig A; Frank, Mason; Michener, Lori A; Hegedus, Eric J

2013-09-01

To systematically review and critique the evidence regarding the diagnostic accuracy of physical examination tests for the scapula in patients with shoulder disorders. A systematic, computerised literature search of PubMED, EMBASE, CINAHL and the Cochrane Library databases (from database inception through January 2012) using keywords related to diagnostic accuracy of physical examination tests of the scapula. The Quality Assessment of Diagnostic Accuracy Studies tool was used to critique the quality of each paper. Eight articles met the inclusion criteria; three were considered to be of high quality. Of the three high-quality studies, two were in reference to a 'diagnosis' of shoulder pain. Only one high-quality article referenced specific shoulder pathology of acromioclavicular dislocation with reported sensitivity of 71% and 41% for the scapular dyskinesis and SICK scapula test, respectively. Overall, no physical examination test of the scapula was found to be useful in differentially diagnosing pathologies of the shoulder.

Design of bunch compressing system with suppression of coherent synchrotron radiation for ATF upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jing, Yichao; Fedurin, Mikhail; Stratakis, Diktys

2015-05-03

One of the operation modes for Accelerator Test Facility (ATF) upgrade is to provide high peak current, high quality electron beam for users. Such operation requires a bunch compressing system with a very large compression ratio. The CSR originating from the strong compressors generally could greatly degrade the quality of the electron beam. In this paper, we present our design for the entire bunch compressing system that will limit the effect of CSR on the e-beam’s quality. We discuss and detail the performance from the start to end simulation of such a compressor for ATF.

[Clinical trial data management and quality metrics system].

PubMed

Chen, Zhao-hua; Huang, Qin; Deng, Ya-zhong; Zhang, Yue; Xu, Yu; Yu, Hao; Liu, Zong-fan

2015-11-01

Data quality management system is essential to ensure accurate, complete, consistent, and reliable data collection in clinical research. This paper is devoted to various choices of data quality metrics. They are categorized by study status, e.g. study start up, conduct, and close-out. In each category, metrics for different purposes are listed according to ALCOA+ principles such us completeness, accuracy, timeliness, traceability, etc. Some general quality metrics frequently used are also introduced. This paper contains detail information as much as possible to each metric by providing definition, purpose, evaluation, referenced benchmark, and recommended targets in favor of real practice. It is important that sponsors and data management service providers establish a robust integrated clinical trial data quality management system to ensure sustainable high quality of clinical trial deliverables. It will also support enterprise level of data evaluation and bench marking the quality of data across projects, sponsors, data management service providers by using objective metrics from the real clinical trials. We hope this will be a significant input to accelerate the improvement of clinical trial data quality in the industry.

Handling qualities related to stall/spin accidents of supersonic fighter aircraft

NASA Technical Reports Server (NTRS)

Anderson, S. B.

1984-01-01

This paper reviews the handling qualities which influence the high angle of attack (AOA) behavior of supersonic fighter aircraft in order to obtain a clearer understanding of the causes of stall/spin accidents. The results show that, because modern fighters suffer more serious consequences when control is lost, good handling qualities are essential for safe operation at high AOA. Relaxed static stability used on some fighter aircraft can result in control problems at high AOA owing to inertia coupling and the difficulty of a recovery from a deep stall. Indications are that the use of departure/spin resistance and an automatic spin prevention system will greatly improve the safety record for modern supersonic fighters.

HIGH-RESOLUTION SPATIAL MODELING OF DAILY WEATHER ELEMENTS FOR A CATCHMENT IN THE OREGON CASCADE MOUNTAINS, UNITED STATES

EPA Science Inventory

High-quality, daily meteorological data at high spatial resolution are essential for a variety of hydrologic and ecological modeling applications that support environmental risk assessments and decision making. This paper describes the development, application, and assessment of ...

Perceptions of Quality Life in Hamilton's Neighbourhood Hubs: A Qualitative Analysis

ERIC Educational Resources Information Center

Eby, Jeanette; Kitchen, Peter; Williams, Allison

2012-01-01

This paper examines perceptions of quality of life in Hamilton, Ontario, Canada from the perspective of residents and key community stakeholders. A series of eight focus groups were conducted. Six sessions were held with residents of neighbourhood "hubs", areas characterized by high levels of poverty. The following themes were…

Handcuffing Institutional Research and Quality Assurance to the Student Experience: 50 Shades of Grey?

ERIC Educational Resources Information Center

Schofield, Mark

2014-01-01

Institutional Research (IR), as a concept, has been gaining traction in the UK and across the world, as evidenced by the growing number of European, African, Australasian and North American associations, communities, conferences and publications. This paper stresses the need for high-quality (Institutional) research behaviours, aligned with and…

Teacher Quality. Education Policy White Paper

ERIC Educational Resources Information Center

Wilson, Suzanne, Ed.

2009-01-01

Good teaching matters. There is persuasive evidence that students benefit from high quality instruction and that these benefits are cumulative for students who have good teachers for several years. Teacher effectiveness matters so much that low-income students lucky enough to have three very good teachers in a row in elementary school earn test…

What Do We Learn from Recall Consumption Data?

ERIC Educational Resources Information Center

Battistin, Erich; Miniaci, Raffaele; Weber, Guglielmo

2003-01-01

In this paper, we use two complementary Italian data sources (the 1995 ISTAT and Bank of Italy household surveys) to generate household-specific nondurable expenditure in the Bank of Italy sample that contains relatively high-quality income data. We show that food expenditure data are of comparable quality and informational content across the two…

The Critical Role of Teacher Incentives in the Northeast States.

ERIC Educational Resources Information Center

Title, David

This paper discusses a variety of incentives that can make a difference in attracting and retaining high quality teachers. These incentives include salaries, retirement benefits, working conditions, quality of life, tenure and seniority rights, and sick leave. The states in the Northeast vary considerably in their ability to attract quality…

Factors Affecting School Quality in Florida

ERIC Educational Resources Information Center

Thornton, Barry; Arbogast, Gordon

2014-01-01

This paper examines the factors that are theorized to be determinants of school quality in the 67 counties of Florida from 2000 to 2011. The model constructed for this purpose is comprised of a mix of independent variables that include county educational attainment (number of high school graduates and State University System enrollees) and…

Enhancing Child Care Quality by Director Training and Collegial Mentoring

ERIC Educational Resources Information Center

Doherty, Gillian; Ferguson, Tammy McCormick; Ressler, Glory; Lomotey, Jonathan

2015-01-01

Although considerable evidence confirms that a director with good leadership and administrative skills is vital for developing and sustaining a high quality child care program, many directors assume the role with little management experience or training. This paper reports on a training program in Canada that combined a formal curriculum to…

Improving Teacher Quality: Lessons from America's "No Child Left Behind"

ERIC Educational Resources Information Center

Smith, Emma; Gorard, Stephen

2007-01-01

How developed countries train, recruit and retain their schoolteachers is an area of considerable interest in education today. In this paper we consider how the US is addressing the issue of teacher quality by holding schools and school districts accountable for ensuring that all teachers of core subjects are "highly qualified" by the…

Conceptualizing and Evaluating Professional Development for School Leaders

ERIC Educational Resources Information Center

Goldring, Ellen B.; Preston, Courtney; Huff, Jason

2012-01-01

In this paper, we present a review of the field of professional development for school leaders. The paper sets out a framework for defining what professional development is, articulates criteria to define "high quality" professional development, and describes goals for professional development. It then critiques the research on…

Disruptive Pedagogies and Technologies in Universities

ERIC Educational Resources Information Center

Anderson, Terry; McGreal, Rory

2012-01-01

This paper is a reaction to the increasing high cost of higher education and the resulting inaccessibility for the millions of potential learners now seeking opportunities for quality higher education opportunities. The paper examines the cost centers associated with campus-based and online education systems and then suggests that disaggregation…

Paper-based silver-nanowire electronic circuits with outstanding electrical conductivity and extreme bending stability.

PubMed

Huang, Gui-Wen; Xiao, Hong-Mei; Fu, Shao-Yun

2014-08-07

Here a facile, green and efficient printing-filtration-press (PFP) technique is reported for room-temperature (RT) mass-production of low-cost, environmentally friendly, high performance paper-based electronic circuits. The as-prepared silver nanowires (Ag-NWs) are uniformly deposited at RT on a pre-printed paper substrate to form high quality circuits via vacuum filtration and pressing. The PFP circuit exhibits more excellent electrical property and bending stability compared with other flexible circuits made by existing techniques. Furthermore, practical applications of the PFP circuits are demonstrated.

The impact of flying qualities on helicopter operational agility

NASA Technical Reports Server (NTRS)

Padfield, Gareth D.; Lappos, Nick; Hodgkinson, John

1993-01-01

Flying qualities standards are formally set to ensure safe flight and therefore reflect minimum, rather than optimum, requirements. Agility is a flying quality but relates to operations at high, if not maximum, performance. While the quality metrics and test procedures for flying, as covered for example in ADS33C, may provide an adequate structure to encompass agility, they do not currently address flight at high performance. This is also true in the fixed-wing world and a current concern in both communities is the absence of substantiated agility criteria and possible conflicts between flying qualities and high performance. AGARD is sponsoring a working group (WG19) title 'Operational Agility' that deals with these and a range of related issues. This paper is condensed from contributions by the three authors to WG19, relating to flying qualities. Novel perspectives on the subject are presented including the agility factor, that quantifies performance margins in flying qualities terms; a new parameter, based on maneuver acceleration is introduced as a potential candidate for defining upper limits to flying qualities. Finally, a probabilistic analysis of pilot handling qualities ratings is presented that suggests a powerful relationship between inherent airframe flying qualities and operational agility.

Comparison of different fungal enzymes for bleaching high-quality paper pulps.

PubMed

Sigoillot, Cécile; Camarero, Susana; Vidal, Teresa; Record, Eric; Asther, Michèle; Pérez-Boada, Marta; Martínez, María Jesús; Sigoillot, Jean-Claude; Asther, Marcel; Colom, José F; Martínez, Angel T

2005-02-23

Wild and recombinant hydrolases and oxidoreductases with a potential interest for environmentally sound bleaching of high-quality paper pulp (from flax) were incorporated into a totally chlorine free (TCF) sequence that also included a peroxide stage. The ability of feruloyl esterase (from Aspergillus niger) and Mn2+-oxidizing peroxidases (from Phanerochaete chrysosporium and Pleurotus eryngii) to decrease the final lignin content of flax pulp was shown. Laccase from Pycnoporus cinnabarinus (without mediator) also caused a slight improvement of pulp brightness that was increased in the presence of aryl-alcohol oxidase. However, the best results were obtained when the laccase treatment was performed in the presence of a mediator, 1-hydroxybenzotriazol (HBT), enabling strong delignification of pulps. The enzymatic removal of lignin resulted in high-final brightness values that are difficult to attain by chemical bleaching of this type of pulp. A partial inactivation of laccase by HBT was observed but this negative effect was strongly reduced in the presence of pulp. The good results obtained with the same laccase expressed in A. niger at bioreactor scale, revealed the feasibility of using recombinant laccase for bleaching high-quality non-wood pulps in the presence of a mediator.

Special Issue of Selected Papers from Visualization and Data Analysis 2011

NASA Technical Reports Server (NTRS)

Kao, David L.; Wong, Pak Chung

2012-01-01

This special issue features the best papers that were selected from the 18th SPIE Conference on Visualization and Data Analysis (VDA 2011). This annual conference is a major international forum for researchers and practitioners interested in data visualization and analytics research, development, and applications. VDA 2011 received 42 high-quality submissions from around the world. Twenty-four papers were selected for full conference papers. The top five papers have been expanded and reviewed for this special issue.

Trends of microwave dielectric materials for antenna application

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sulong, T. A. T., E-mail: tuanamirahtuansulong@gmail.com; Osman, R. A. M., E-mail: rozana@unimap.edu.my; Idris, M. S., E-mail: sobri@unimap.edu.my

Rapid development of a modern microwave communication system requires a high quality microwave dielectric ceramic material to be used as mobile and satellite communication. High permittivity of dielectric ceramics leads to fabrication of compact device for electronic components. Dielectric ceramics which used for microwave applications required three important parameters such as high or appropriate permittivity (ε{sub r}), high quality factor (Q {sub f} ≥ 5000 GH z) and good temperature coefficient of resonant frequency (τ{sub f}). This paper review of various dielectric ceramic materials used as microwave dielectric materials and related parameters for antenna applications.

High-quality uniform dry transfer of graphene to polymers.

PubMed

Lock, Evgeniya H; Baraket, Mira; Laskoski, Matthew; Mulvaney, Shawn P; Lee, Woo K; Sheehan, Paul E; Hines, Daniel R; Robinson, Jeremy T; Tosado, Jacob; Fuhrer, Michael S; Hernández, Sandra C; Walton, Scott G

2012-01-11

In this paper we demonstrate high-quality, uniform dry transfer of graphene grown by chemical vapor deposition on copper foil to polystyrene. The dry transfer exploits an azide linker molecule to establish a covalent bond to graphene and to generate greater graphene-polymer adhesion compared to that of the graphene-metal foil. Thus, this transfer approach provides a novel alternative route for graphene transfer, which allows for the metal foils to be reused. © 2011 American Chemical Society

School Quality and the Development of Cognitive Skills between Age Four and Six

PubMed Central

Borghans, Lex; Golsteyn, Bart H. H.; Zölitz, Ulf

2015-01-01

This paper studies the extent to which young children develop their cognitive ability in high and low quality schools. We use a representative panel data set containing cognitive test scores of 4-6 year olds in Dutch schools. School quality is measured by the school’s average achievement test score at age 12. Our results indicate that children in high-quality schools develop their skills substantially faster than those in low-quality schools. The results remain robust to the inclusion of initial ability, parental background, and neighborhood controls. Moreover, using proximity to higher-achieving schools as an instrument for school choice corroborates the results. The robustness of the results points toward a causal interpretation, although it is not possible to erase all doubt about unobserved confounding factors. PMID:26182123

Success factors in technology development

NASA Astrophysics Data System (ADS)

Preston, John T.

1995-01-01

Universities in the U.S. have a significant impact on business through the transfer of technology. This paper describes goals and philosophy of the Technology Licensing Office at the Massachusetts Institute of Technology. This paper also relates the critical factors for susscessful technology transfer, particularly relating to new business formation. These critical factors include the quality of the technology, the quality of the management, the quality of the investor, the passion for success, and the image of the company. Descriptions of three different levels of investment are also given and the most successful level of investment for starting a new company is reviewed. Licensing to large companies is also briefly reviewed, as this type of licensing requires some different strategies than that of licensing to start-up companies. High quality critical factors and intelligent investment create rewards for the parties and successful ventures.

Reporting and methodological quality of meta-analyses in urological literature.

PubMed

Xia, Leilei; Xu, Jing; Guzzo, Thomas J

2017-01-01

To assess the overall quality of published urological meta-analyses and identify predictive factors for high quality. We systematically searched PubMed to identify meta-analyses published from January 1st, 2011 to December 31st, 2015 in 10 predetermined major paper-based urology journals. The characteristics of the included meta-analyses were collected, and their reporting and methodological qualities were assessed by the PRISMA checklist (27 items) and AMSTAR tool (11 items), respectively. Descriptive statistics were used for individual items as a measure of overall compliance, and PRISMA and AMSTAR scores were calculated as the sum of adequately reported domains. Logistic regression was used to identify predictive factors for high qualities. A total of 183 meta-analyses were included. The mean PRISMA and AMSTAR scores were 22.74 ± 2.04 and 7.57 ± 1.41, respectively. PRISMA item 5, protocol and registration, items 15 and 22, risk of bias across studies, items 16 and 23, additional analysis had less than 50% adherence. AMSTAR item 1, " a priori " design, item 5, list of studies and item 10, publication bias had less than 50% adherence. Logistic regression analyses showed that funding support and " a priori " design were associated with superior reporting quality, following PRISMA guideline and " a priori " design were associated with superior methodological quality. Reporting and methodological qualities of recently published meta-analyses in major paper-based urology journals are generally good. Further improvement could potentially be achieved by strictly adhering to PRISMA guideline and having " a priori " protocol.

Skiving stacked sheets of paper into test paper for rapid and multiplexed assay

PubMed Central

Yang, Mingzhu; Zhang, Wei; Yang, Junchuan; Hu, Binfeng; Cao, Fengjing; Zheng, Wenshu; Chen, Yiping; Jiang, Xingyu

2017-01-01

This paper shows that stacked sheets of paper preincubated with different biological reagents and skiving them into uniform test paper sheets allow mass manufacturing of multiplexed immunoassay devices and simultaneous detection of multiplex targets that can be read out by a barcode scanner. The thickness of one sheet of paper can form the width of a module for the barcode; when stacked, these sheets of paper can form a series of barcodes representing the targets, depending on the color contrast provided by a colored precipitate of an immunoassay. The uniform thickness of sheets of paper allows high-quality signal readout. The manufacturing method allows highly efficient fabrication of the materials and substrates for a straightforward assay of targets that range from drugs of abuse to biomarkers of blood-transmitted infections. In addition, as a novel alternative to the conventional point-of-care testing method, the paper-based barcode assay system can provide highly efficient, accurate, and objective diagnoses. PMID:29214218

Recent developments in minimal processing: a tool to retain nutritional quality of food.

PubMed

Pasha, Imran; Saeed, Farhan; Sultan, M Tauseef; Khan, Moazzam Rafiq; Rohi, Madiha

2014-01-01

The modernization during the last century resulted in urbanization coupled with modifications in lifestyles and dietary habits. In the same era, industrial developments made it easier to meet the requirements for processed foods. However, consumers are now interested in minimally processed foods owing to increase in their awareness to have fruits and vegetables with superior quality, and natural integrity with fewer additives. The food products deteriorate as a consequence of physiological aging, biochemical changes, high respiration rat,e and high ethylene production. These factors contribute substantially to discoloration, loss of firmness, development of off-flavors, acidification, and microbial spoilage. Simultaneously, food processors are using emerging approaches to process perishable commodities, along with enhanced nutritional and sensorial quality. The present review article is an effort to utilize the modern approaches to minimize the processing and deterioration. The techniques discussed in this paper include chlorination, ozonation, irradiation, photosensitization, edible coating, natural preservative use, high-pressure processing, microwave heating, ohmic heating, and hurdle technology. The consequences of these techniques on shelf-life stability, microbial safety, preservation of organoleptic and nutritional quality, and residue avoidance are the limelight of the paper. Moreover, the discussion has been made on the feasibility and operability of these techniques in modern-day processing.

The effect of creative psychological interventions on psychological outcomes for adult cancer patients: a systematic review of randomised controlled trials.

PubMed

Archer, S; Buxton, S; Sheffield, D

2015-01-01

This systematic review examined the effectiveness of creative psychological interventions (CPIs) for adult cancer patients. In particular, the findings of randomised controlled trials of art, drama, dance/movement and music therapies on psychological outcomes were examined. The review yielded 10 original studies analysing data from a total of 488 patients. Data extraction and quality assessment were conducted by two independent reviewers. Four of the papers focused on the use of art therapy, three studies used music therapy, one paper utilised dance therapy, one study used dance/movement therapy and the remaining paper used creative arts therapies, which was a combination of different art-based therapy approaches. Eight papers focused solely on breast cancer patients, and the remaining studies included mixed cancer sites/stages. The studies reported improvements in anxiety and depression, quality of life, coping, stress, anger and mood. However, few physical benefits of CPIs were reported; there was no significant impact of a CPI on physical aspects of quality of life, vigour-activity or fatigue-inertia or physical functioning. One study was assessed as high quality, seven studies were assessed as satisfactory and two studies were assessed to be of poorer quality. There is initial evidence that CPIs benefit adult cancer patients with respect to anxiety and depression, quality of life, coping, stress, anger and mood; there was no evidence to suggest that any one type of CPI was especially beneficial. However, more and better quality research needs to be conducted, particularly in the areas of drama and dance/movement therapies. Copyright © 2014 John Wiley & Sons, Ltd.

Effects of combined pressure and temperature on enzymes related to quality of fruits and vegetables: from kinetic information to process engineering aspects.

PubMed

Ludikhuyze, L; Van Loey, A; Indrawati; Smout, C; Hendrickx, M

2003-01-01

Throughout the last decade, high pressure technology has been shown to offer great potential to the food processing and preservation industry in delivering safe and high quality products. Implementation of this new technology will be largely facilitated when a scientific basis to assess quantitatively the impact of high pressure processes on food safety and quality becomes available. Besides, quantitative data on the effects of pressure and temperature on safety and quality aspects of foods are indispensable for design and evaluation of optimal high pressure processes, i.e., processes resulting in maximal quality retention within the constraints of the required reduction of microbial load and enzyme activity. Indeed it has to be stressed that new technologies should deliver, apart from the promised quality improvement, an equivalent or preferably enhanced level of safety. The present paper will give an overview from a quantitative point of view of the combined effects of pressure and temperature on enzymes related to quality of fruits and vegetables. Complete kinetic characterization of the inactivation of the individual enzymes will be discussed, as well as the use of integrated kinetic information in process engineering.

How to do (or not to do)… Measuring health worker motivation in surveys in low- and middle-income countries.

PubMed

Borghi, J; Lohmann, J; Dale, E; Meheus, F; Goudge, J; Oboirien, K; Kuwawenaruwa, A

2018-03-01

A health system's ability to deliver quality health care depends on the availability of motivated health workers, which are insufficient in many low income settings. Increasing policy and researcher attention is directed towards understanding what drives health worker motivation and how different policy interventions affect motivation, as motivation is key to performance and quality of care outcomes. As a result, there is growing interest among researchers in measuring motivation within health worker surveys. However, there is currently limited guidance on how to conceptualize and approach measurement and how to validate or analyse motivation data collected from health worker surveys, resulting in inconsistent and sometimes poor quality measures. This paper begins by discussing how motivation can be conceptualized, then sets out the steps in developing questions to measure motivation within health worker surveys and in ensuring data quality through validity and reliability tests. The paper also discusses analysis of the resulting motivation measure/s. This paper aims to promote high quality research that will generate policy relevant and useful evidence. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Design of Interline Unified Power Quality Conditioner for Power Quality Disturbances using Simulink

NASA Astrophysics Data System (ADS)

Kumaraswamy, G.; Reddy, Y. Rajasekhar; Harikrishna, Ch.

2012-10-01

Proliferation of electronic equipment in commercial and industrial processes has resulted in increasingly sensitive electrical loads to be fed from power distribution system which introduce contamination to voltage and current waveforms at the point of common coupling of industrial loads. The unified power quality conditioner (UPQC) is connected between two different feeders (lines), hence this method of connection of the UPQC is called as Interline UPQC (IUPQC).This paper proposes a new connection for a UPQC to improve the power quality of two feeders in a distribution system. Interline Unified Power Quality Conditioner (IUPQC), specifically aims at the integration of series VSC and Shunt VSC to provide high quality power supply by means of voltage sag/swell compensation, harmonic elimination and power factor correction in a power distribution network, so that improved power quality can be made available at the point of common coupling. The structure, control and capability of the IUPQC are discussed in this paper. The efficiency of the proposed configuration has been verified through simulation using MATLAB/ SIMULINK.

Variation of Water Quality Parameters with Siltation Depth for River Ichamati Along International Border with Bangladesh Using Multivariate Statistical Techniques

NASA Astrophysics Data System (ADS)

Roy, P. K.; Pal, S.; Banerjee, G.; Biswas Roy, M.; Ray, D.; Majumder, A.

2014-12-01

River is considered as one of the main sources of freshwater all over the world. Hence analysis and maintenance of this water resource is globally considered a matter of major concern. This paper deals with the assessment of surface water quality of the Ichamati river using multivariate statistical techniques. Eight distinct surface water quality observation stations were located and samples were collected. For the samples collected statistical techniques were applied to the physico-chemical parameters and depth of siltation. In this paper cluster analysis is done to determine the relations between surface water quality and siltation depth of river Ichamati. Multiple regressions and mathematical equation modeling have been done to characterize surface water quality of Ichamati river on the basis of physico-chemical parameters. It was found that surface water quality of the downstream river was different from the water quality of the upstream. The analysis of the water quality parameters of the Ichamati river clearly indicate high pollution load on the river water which can be accounted to agricultural discharge, tidal effect and soil erosion. The results further reveal that with the increase in depth of siltation, water quality degraded.

Approaches to improve the quality of maternal and newborn health care: an overview of the evidence.

PubMed

Austin, Anne; Langer, Ana; Salam, Rehana A; Lassi, Zohra S; Das, Jai K; Bhutta, Zulfiqar A

2014-09-04

Despite progress in recent years, an estimated 273,500 women died as a result of maternal causes in 2010. The burden of these deaths is disproportionately bourne by women who reside in low income countries or belong to the poorest sectors of the population of middle or high income ones, and it is particularly acute in regions where access to and utilization of facility-based services for childbirth and newborn care is lowest. Evidence has shown that poor quality of facility-based care for these women and newborns is one of the major contributing factors for their elevated rates of morbidity and mortality. In addition, women who perceive the quality of facilty-based care to be poor,may choose to avoid facility-based deliveries, where life-saving interventions could be availble. In this context, understanding the underlying factors that impact the quality of facility-based services and assessing the effectiveness of interventions to improve the quality of care represent critical inputs for the improvement of maternal and newborn health. This series of five papers assesses and summarizes information from relevant systematic reviews on the impact of various approaches to improve the quality of care for women and newborns. The first paper outlines the conceptual framework that guided this study and the methodology used for selecting the reviews and for the analysis. The results are described in the following three papers, which highlight the evidence of interventions to improve the quality of maternal and newborn care at the community, district, and facility level. In the fifth and final paper of the series, the overall findings of the review are discussed, research gaps are identified, and recommendations proposed to impove the quality of maternal and newborn health care in resource-poor settings.

Perceived image quality for autostereoscopic holograms in healthcare training

NASA Astrophysics Data System (ADS)

Goldiez, Brian; Abich, Julian; Carter, Austin; Hackett, Matthew

2017-03-01

The current state of dynamic light field holography requires further empirical investigation to ultimately advance this developing technology. This paper describes a user-centered design approach for gaining insight into the features most important to clinical personnel using emerging dynamic holographic displays. The approach describes the generation of a high quality holographic model of a simulated traumatic amputation above the knee using 3D scanning. Using that model, a set of static holographic prints will be created varying in color or monochrome, contrast ratio, and polygon density. Leveraging methods from image quality research, the goal for this paper is to describe an experimental approach wherein participants are asked to provide feedback regarding the elements previously mentioned in order to guide the ongoing evolution of holographic displays.

A business case for quality improvement in addiction treatment: evidence from the NIATx collaborative.

PubMed

Quanbeck, Andrew R; Madden, Lynn; Edmundson, Eldon; Ford, James H; McConnell, K John; McCarty, Dennis; Gustafson, David H

2012-01-01

The Network for the Improvement of Addiction Treatment (NIATx) promotes treatment access and retention through a customer-focused quality improvement model. This paper explores the issue of the "business case" for quality improvement in addiction treatment from the provider's perspective. The business case model developed in this paper is based on case examples of early NIATx participants coupled with a review of the literature. Process inefficiencies indicated by long waiting times, high no-show rates, and low continuation rates cause underutilization of capacity and prevent optimal financial performance. By adopting customer-focused practices aimed at removing barriers to treatment access and retention, providers may be able to improve financial performance, increase staff retention, and gain long-term strategic advantage.

Impact of silvicultural treatment on chestnut seedling growth and survival

Treesearch

C.C. Pinchot; S.E. Schlarbaum; S.L. Clark; C.J. Schweitzer; A.M. Saxton; F. V. Hebard

2014-01-01

Putatively blight-resistant advanced backcross chestnut seedlings will soon be available for outplanting on a regional scale. Few studies have examined the importance of silvicultural treatment or seedling quality to chestnut reintroduction in the U.S. This paper examines results from a silvicultural study of high-quality chestnut seedlings on the Cumberland Plateau of...

The Bottom Line: Quality/Consumer-Oriented Child Care.

ERIC Educational Resources Information Center

Jackson, Cheryl D.

Arguing that the provision of child care services is consistent with the role of the community college, this paper provides an overview of the current demand for and delivery of child care services and briefly discusses ways in which community colleges can assist in the development and provision of consumer-oriented, high-quality child care.…

Can Preschool Protect Young Children's Cognitive and Social Development? Variation by Center Quality and Duration of Attendance

ERIC Educational Resources Information Center

Hall, James; Sylva, Kathy; Sammons, Pam; Melhuish, Edward; Siraj-Blatchford, Iram; Taggart, Brenda

2013-01-01

This paper illustrates how high-quality preschool has the potential to serve as an intervention within normal populations. Although it is well known that targeted Early Interventions can protect the development of young children from developmental risks, there remains less evidence concerning universal preschool education. To address this…

Quality of Life Experienced by Human Capital: An Assessment of European Cities

ERIC Educational Resources Information Center

Morais, Paulo; Migueis, Vera L.; Camanho, Ana S.

2013-01-01

This paper aims to provide an assessment of urban quality of life (QoL) of European cities from the perspective of qualified human resources. The competitiveness of cities relies increasingly in their capacity to attract highly educated workers, as they are important assets for firms when choosing a location. Qualified human resources, on the…

On the Right Track: Measuring Early Childhood Development Program Quality Internationally

ERIC Educational Resources Information Center

Limlingan, Maria Cristina

2011-01-01

Two of the main obstacles for drawing educational comparisons consist in determining what are considered "high quality" initiatives, and finding a common tool that can adapt to differences in both structure and content, as well as to the cultural and demographic characteristics of the population it wishes to serve. This paper focuses on…

The Effect of Wage Compression and Alternative Labor Market Opportunities on Teacher Quality in Venezuela

ERIC Educational Resources Information Center

Ortega, Daniel E.

2010-01-01

This paper examines the effect of teacher relative wages and teacher wage dispersion on high school graduates' preferences for teaching majors in College. This approximation to teacher quality is appropriate in a country like Venezuela as opposed to the US since the rigidity of the tertiary school system significantly limits mobility between…

Fitting relationship between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam

NASA Astrophysics Data System (ADS)

Ji, Zhong-Ye; Zhang, Xiao-Fang

2018-01-01

The mathematical relation between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam is important in beam quality control theory of the high-energy laser weapon system. In order to obtain this mathematical relation, numerical simulation is used in the research. Firstly, the Zernike representations of typically distorted atmospheric wavefront aberrations caused by the Kolmogoroff turbulence are generated. And then, the corresponding beam quality β factors of the different distorted wavefronts are calculated numerically through fast Fourier transform. Thus, the statistical distribution rule between the beam quality β factors of high-energy laser and the wavefront aberrations of the beam can be established by the calculated results. Finally, curve fitting method is chosen to establish the mathematical fitting relationship of these two parameters. And the result of the curve fitting shows that there is a quadratic curve relation between the beam quality β factor of high-energy laser and the wavefront aberration of laser beam. And in this paper, 3 fitting curves, in which the wavefront aberrations are consisted of Zernike Polynomials of 20, 36, 60 orders individually, are established to express the relationship between the beam quality β factor and atmospheric wavefront aberrations with different spatial frequency.

Creating High Functioning Schools: Practice and Research.

ERIC Educational Resources Information Center

Cano, Yvonne, Ed.; Wood, Fred H., Ed.; Simmons, Jan C., Ed.

This book contains 17 papers, chosen from those presented within the last 2 years at the annual National Conference on Creating the Quality School, hosted by the Center for the Study of Small/Rural Schools at the University of Oklahoma. The papers are grouped into three sections: leadership for school improvement; classroom practices for school…

Publishing in "SERJ": An Analysis of Papers from 2002-2009

ERIC Educational Resources Information Center

Zieffler, Andrew; Garfield, Joan; delMas, Robert C.; Le, Laura; Isaak, Rebekah; Bjornsdottir, Audbjorg; Park, Jiyoon

2011-01-01

"SERJ" has provided a high quality professional publication venue for researchers in statistics education for close to a decade. This paper presents a review of the articles published to explore what they suggest about the field of statistics education, the researchers, the questions addressed, and the growing knowledge base on teaching and…

Teaching Geography in American History. ERIC Trends/Issues, Paper No. 1.

ERIC Educational Resources Information Center

Backler, Alan

This ERIC Trends Issues paper highlights the complementary qualities of geography and history and recommends the infusion of geography core themes into high school U.S. history courses. Part 1, "Rationale for Teaching Geography in American History," features information about: (1) overcoming the neglect of geography instruction; (2)…

75 FR 29364 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From China...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... Indonesia AGENCY: United States International Trade Commission. ACTION: Scheduling of the final phase of...-fair-value imports from China and Indonesia of certain coated paper, provided for in subheadings 4810...) are being provided to manufacturers, producers, or exporters in China and Indonesia of certain coated...

Modification of cellulose foam paper for use as a high-quality biocide disinfectant filter for drinking water.

PubMed

Heydarifard, Solmaz; Taneja, Kapila; Bhanjana, Gaurav; Dilbaghi, Neeraj; Nazhad, Mousa M; Kim, Ki-Hyun; Kumar, Sandeep

2018-02-01

Development of a foam-formed cellulose filter paper with high wet strength was carried out for application as a drinking water filter. The wet strength and antimicrobial activity of cellulose foam paper against several bacteria species (Bacillus subtilis MTCC 441 (Gram +ve), B. cereus NCDC 240 (Gram +ve), Pseudomonas aeruginosa NCDC 105 (Gram -ve), Klebsiella pneumonia NCDC 138 (Gram -ve), and Escherichia coli MTCC 40 (Gram -ve)) were investigated. The morphology and structure of the cellulose foam paper were characterized using scanning electron microscopy (SEM). The results of our study confirmed that glutaraldehyde solution or 1,2,3,4-butanetetracarboxylic acid (BTCA) added to cellulose foam paper pretreated with cationic polyacrylamide (C-PAM) provided very high and stable wet strength performance together with excellent antimicrobial properties. Copyright © 2017 Elsevier Ltd. All rights reserved.

A systematic literature review of the quality of evidence for injury and rehabilitation interventions in humanitarian crises.

PubMed

Smith, James; Roberts, Bayard; Knight, Abigail; Gosselin, Richard; Blanchet, Karl

2015-11-01

Humanitarian crises continue to pose a significant threat to health; the United Nations estimates that 144 million people are directly affected by conflict or environmental disasters. During most humanitarian crises, surgical and rehabilitative interventions remain a priority. This review assessed the quality of evidence that informs injury and physical rehabilitation interventions in humanitarian crises. Peer-reviewed and grey literature sources were assessed in a systematic manner. Selected papers were evaluated using quality criteria based on a modified version of the STROBE protocol. 46 papers met the inclusion criteria. 63 % of the papers referred to situations of armed conflict, of which the Yugoslav Wars were the most studied crisis context. 59 % of the studies were published since the year 2000. However, only two studies were considered of a high quality. While there is now a greater emphasis on research in this sector, the volume of evidence remains inadequate given the growing number of humanitarian programmes worldwide. Further research is needed to ensure a greater breadth and depth of understanding of the most appropriate interventions in different settings.

High-dose irradiated food: Current progress, applications, and prospects

NASA Astrophysics Data System (ADS)

Feliciano, Chitho P.

2018-03-01

Food irradiation as an established and mature technology has gained more attention in the food industry for ensuring food safety and quality. Primarily used for phytosanitary applications, its use has been expanded for developing various food products for varied purposes (e.g. ready-to-eat & ready-to-cook foods, hospital diets, etc.). This paper summarized and analyzed the recent progress and application of high-dose irradiation and discussed its prospects in the field of food product development, its safety and quality.

Ultrasonically Assisted Cutting of Bio-tissues in Microtomy

NASA Astrophysics Data System (ADS)

Wang, Dong; Roy, Anish; Silberschmidt, Vadim V.

Modern-day histology of bio-tissues for supporting stratified medicine diagnoses requires high-precision cutting to ensure high quality extremely thin specimens used in analysis. Additionally, the cutting quality is significantly affected by a wide variety of soft and hard tissues in the samples. This paper deals with development of a next generation of microtome employing introduction of controlled ultrasonic vibration to realise a hybrid cutting process of bio-tissues. The study is based on a combination of advanced experimental and numerical (finite-element) studies of multi-body dynamics of a cutting system. The quality of cut samples produced with the prototype is compared with the state-of-the-art.

Growth of high quality bulk size single crystals of inverted solubility lithium sulphate monohydrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Silambarasan, A.; Rajesh, P., E-mail: rajeshp@ssn.edu.in; Ramasamy, P.

2015-06-24

The paper summarizes the processes of growing large lithium sulfate monohydrate (LSMH) single crystals. We have established a procedure to grow high quality bulk size single crystals of inverted solubility LSMH by a newly developed unidirectional crystallization technique called the Sankeranarayenan - Ramasamy (SR) method. The convective flow of crystal growth processes from solution and the conditions of growing crystals of various aspects were discussed. Good quality LSMH single crystal is grown of the size 20 mmX80 mm without cracks, localized-defects and inclusions. The as-grown crystals are suitable for piezoelectric and nonlinear optical applications.

Using software metrics and software reliability models to attain acceptable quality software for flight and ground support software for avionic systems

NASA Technical Reports Server (NTRS)

Lawrence, Stella

1992-01-01

This paper is concerned with methods of measuring and developing quality software. Reliable flight and ground support software is a highly important factor in the successful operation of the space shuttle program. Reliability is probably the most important of the characteristics inherent in the concept of 'software quality'. It is the probability of failure free operation of a computer program for a specified time and environment.

Integrating cognitive and peripheral factors in predicting hearing-aid processing effectiveness

PubMed Central

Kates, James M.; Arehart, Kathryn H.; Souza, Pamela E.

2013-01-01

Individual factors beyond the audiogram, such as age and cognitive abilities, can influence speech intelligibility and speech quality judgments. This paper develops a neural network framework for combining multiple subject factors into a single model that predicts speech intelligibility and quality for a nonlinear hearing-aid processing strategy. The nonlinear processing approach used in the paper is frequency compression, which is intended to improve the audibility of high-frequency speech sounds by shifting them to lower frequency regions where listeners with high-frequency loss have better hearing thresholds. An ensemble averaging approach is used for the neural network to avoid the problems associated with overfitting. Models are developed for two subject groups, one having nearly normal hearing and the other mild-to-moderate sloping losses. PMID:25669257

[How to write high-quality epidemiological research paper Ⅵ. Strengthening the Reporting of Observational Studies in Epidemiology-Nutritional Epidemiology (STROBE-nut)].

PubMed

Ding, C Y; Cao, Y; Yang, C; Sun, F; Zhan, S Y

2017-01-10

Concerns have been raised about the reporting quality in nutritional epidemiology. Therefore, strengthening the reporting of observational studies in epidemiology-nutritional epidemiology (STROBE-nut) has been proposed by extending the STROBE statement to include additional recommendations on issues related to nutritional epidemiology and dietary assessment, aiming to provide more specific guidelines on how to report observational research in the field. This paper presents a brief introduction to STROBE-nut and also an explanation of the key points in the additional items, with an example illustrating the application of the checklist.

Precision manufacturing for clinical-quality regenerative medicines.

PubMed

Williams, David J; Thomas, Robert J; Hourd, Paul C; Chandra, Amit; Ratcliffe, Elizabeth; Liu, Yang; Rayment, Erin A; Archer, J Richard

2012-08-28

Innovations in engineering applied to healthcare make a significant difference to people's lives. Market growth is guaranteed by demographics. Regulation and requirements for good manufacturing practice-extreme levels of repeatability and reliability-demand high-precision process and measurement solutions. Emerging technologies using living biological materials add complexity. This paper presents some results of work demonstrating the precision automated manufacture of living materials, particularly the expansion of populations of human stem cells for therapeutic use as regenerative medicines. The paper also describes quality engineering techniques for precision process design and improvement, and identifies the requirements for manufacturing technology and measurement systems evolution for such therapies.

A systematic review of goal directed fluid therapy: rating of evidence for goals and monitoring methods.

PubMed

Wilms, Heath; Mittal, Anubhav; Haydock, Matthew D; van den Heever, Marc; Devaud, Marcello; Windsor, John A

2014-04-01

To review the literature on goal directed fluid therapy and evaluate the quality of evidence for each combination of goal and monitoring method. A search of major digital databases and hand search of references was conducted. All studies assessing the clinical utility of a specific fluid therapy goal or set of goals using any monitoring method were included. Data was extracted using a pre-determined pro forma and papers were evaluated using GRADE principles to assess evidence quality. Eighty-one papers met the inclusion criteria, investigating 31 goals and 22 methods for monitoring fluid therapy in 13052 patients. In total there were 118 different goal/method combinations. Goals with high evidence quality were central venous lactate and stroke volume index. Goals with moderate quality evidence were sublingual microcirculation flow, the oxygen extraction ratio, cardiac index, cardiac output, and SVC collapsibility index. This review has highlighted the plethora of goals and methods for monitoring fluid therapy. Strikingly, there is scant high quality evidence, in particular for non-invasive G/M combinations in non-operative and non-intensive care settings. There is an urgent need to address this research gap, which will be helped by methodologies to compare utility of G/M combinations. Copyright © 2014 Elsevier Inc. All rights reserved.

The Role of Teachers at University: What Do High Achiever Students Look for?

ERIC Educational Resources Information Center

Monteiro, Silvia; Almeida, Leandro S.; Vasconcelos, Rosa M.

2012-01-01

The perceptions of students about their teachers have interested the academic and scientific community, regarding the improvement of the quality of higher education. This paper presents data obtained from interviews conducted with ten high achiever engineering students and focuses on the characteristics of teachers that are highly valued by the…

High Performance Work Systems for Online Education

ERIC Educational Resources Information Center

Contacos-Sawyer, Jonna; Revels, Mark; Ciampa, Mark

2010-01-01

The purpose of this paper is to identify the key elements of a High Performance Work System (HPWS) and explore the possibility of implementation in an online institution of higher learning. With the projected rapid growth of the demand for online education and its importance in post-secondary education, providing high quality curriculum, excellent…

A Regression-Based Family of Measures for Full-Reference Image Quality Assessment

NASA Astrophysics Data System (ADS)

Oszust, Mariusz

2016-12-01

The advances in the development of imaging devices resulted in the need of an automatic quality evaluation of displayed visual content in a way that is consistent with human visual perception. In this paper, an approach to full-reference image quality assessment (IQA) is proposed, in which several IQA measures, representing different approaches to modelling human visual perception, are efficiently combined in order to produce objective quality evaluation of examined images, which is highly correlated with evaluation provided by human subjects. In the paper, an optimisation problem of selection of several IQA measures for creating a regression-based IQA hybrid measure, or a multimeasure, is defined and solved using a genetic algorithm. Experimental evaluation on four largest IQA benchmarks reveals that the multimeasures obtained using the proposed approach outperform state-of-the-art full-reference IQA techniques, including other recently developed fusion approaches.

Research on construction quality and improvement of assembly construction

NASA Astrophysics Data System (ADS)

Cheng, Fei

2017-11-01

Based on the acceleration of the urbanization process and the improvement of the quality of life of our residents, the demand for building construction has been increasing. In this context, the construction industry in order to promote the construction efficiency, quality improvement, to meet the needs of the development of the times to strengthen the new technology, the use of new technologies. At present, China’s engineering construction units in the process of carrying out the project to strengthen the use of assembly-type construction technology, which thus achieved for the traditional construction work low-level, high time-consuming issues, and promote the steady improvement of production efficiency. Based on this, this paper focuses on the analysis of the connotation of the assembly structure and analyzes the quality problems in the construction process of the construction projects and puts forward the improvement measures to promote the improvement of the building quality and the construction of the building Construction speed. Based on this, this paper analyzes the structural system and design of prefabricated building.

The cognitive processes underpinning clinical decision in triage assessment: a theoretical conundrum?

PubMed

Noon, Amy J

2014-01-01

High quality clinical decision-making (CDM) has been highlighted as a priority across the nursing profession. Triage nurses, in the Accident and Emergency (A&E) department, work in considerable levels of uncertainty and require essential skills including: critical thinking, evaluation and decision-making. The content of this paper aims to promote awareness of how triage nurses make judgements and decisions in emergency situations. By exploring relevant literature on clinical judgement and decision-making theory, this paper demonstrates the importance of high quality decision-making skills underpinning the triage nurse's role. Having an awareness of how judgements and decisions are made is argued as essential, in a time where traditional nurse boundaries and responsibilities are never more challenged. It is hoped that the paper not only raises this awareness in general but also, in particular, engages the triage nurse to look more critically at how they make their own decisions in their everyday practice. Copyright © 2013 Elsevier Ltd. All rights reserved.

Public Reporting and Demand Rationing: Evidence from the Nursing Home Industry.

PubMed

He, Daifeng; Konetzka, R Tamara

2015-11-01

This paper examines an under-explored unintended consequence of public reporting: the potential for demand rationing. Public reporting, although intended to increase consumer access to high-quality products, may have provided the perverse incentive for high-quality providers facing fixed capacity and administrative pricing to avoid less profitable types of residents. Using data from the nursing home industry before and after the implementation of the public reporting system in 2002, we find that high-quality nursing homes facing capacity constraints reduced admissions of less profitable Medicaid residents while increasing the more profitable Medicare and private-pay admissions, relative to low-quality nursing homes facing no capacity constraints. These effects, although small in magnitude, are consistent with provider rationing of demand on the basis of profitability and underscore the important role of institutional details in designing effective public reporting systems for regulated industries. Copyright © 2014 John Wiley & Sons, Ltd.

Imagery analysis and the need for standards

NASA Astrophysics Data System (ADS)

Grant, Barbara G.

2014-09-01

While efforts within the optics community focus on the development of high-quality systems and data products, comparatively little attention is paid to their use. Our standards for verification and validation are high; but in some user domains, standards are either lax or do not exist at all. In forensic imagery analysis, for example, standards exist to judge image quality, but do not exist to judge the quality of an analysis. In litigation, a high quality analysis is by default the one performed by the victorious attorney's expert. This paper argues for the need to extend quality standards into the domain of imagery analysis, which is expected to increase in national visibility and significance with the increasing deployment of unmanned aerial vehicle—UAV, or "drone"—sensors in the continental U. S.. It argues that like a good radiometric calibration, made as independent of the calibrated instrument as possible, a good analysis should be subject to standards the most basic of which is the separation of issues of scientific fact from analysis results.

Mind the Mode: Differences in Paper vs. Web-Based Survey Modes Among Women With Cancer.

PubMed

Hagan, Teresa L; Belcher, Sarah M; Donovan, Heidi S

2017-09-01

Researchers administering surveys seek to balance data quality, sources of error, and practical concerns when selecting an administration mode. Rarely are decisions about survey administration based on the background of study participants, although socio-demographic characteristics like age, education, and race may contribute to participants' (non)responses. In this study, we describe differences in paper- and web-based surveys administered in a national cancer survivor study of women with a history of cancer to compare the ability of each survey administrative mode to provide quality, generalizable data. We compared paper- and web-based survey data by socio-demographic characteristics of respondents, missing data rates, scores on primary outcome measure, and administrative costs and time using descriptive statistics, tests of mean group differences, and linear regression. Our findings indicate that more potentially vulnerable patients preferred paper questionnaires and that data quality, responses, and costs significantly varied by mode and participants' demographic information. We provide targeted suggestions for researchers conducting survey research to reduce survey error and increase generalizability of study results to the patient population of interest. Researchers must carefully weigh the pros and cons of survey administration modes to ensure a representative sample and high-quality data. Copyright © 2017 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

Towards High-Quality Reflective Learning amongst Law Undergraduate Students: Analysing Students' Reflective Journals during a Problem-Based Learning Course

ERIC Educational Resources Information Center

Rué, Joan; Font, Antoni; Cebrián, Gisela

2013-01-01

There is wide agreement that problem-based learning is a key strategy to promote individual abilities for "learning how to learn". This paper presents the main contributions that reflective journals and the problem-based learning approach can make to foster professional knowledge and quality learning in higher education. Thirty-six…

The Impact of Oregon's Pension Legacy Costs on New Teacher Turnover and Quality. CEDR Working Paper. WP #2016-5

ERIC Educational Resources Information Center

Cahill, Kevin E.; Dyke, Andrew; Tapogna, John

2016-01-01

Pension legacy costs can restrict the amount of resources available for current public education, potentially making it more difficult to attract and retain high-quality teachers. Oregon provides a useful case study in pension legacy costs because many school districts in the state are now reallocating General Fund expenditures to cover sizeable…

Methods to Efficiently Achieve High-Quality Teaching of Accounting at the University--A Teaching Innovation Evaluation

ERIC Educational Resources Information Center

Hruška, Ing. Zdenek

2018-01-01

Teaching of accounting is specific due to its frequently updated content, because Czech legal regulations significantly change annually, either because of the legislative or harmonization modifications, hence there is a need to constantly seek new ways to ensure a good quality of teaching in the efficient education process. The paper is based on…

Strategies for Increasing the Market Share of Recycled Products—A Games Theory Approach

NASA Astrophysics Data System (ADS)

Batzias, Dimitris F.; Pollalis, Yannis A.

2009-08-01

A methodological framework (including 28 activity stages and 10 decision nodes) has been designed under the form of an algorithmic procedure for the development of strategies for increasing the market share of recycled products within a games theory context. A case example is presented referring to a paper market, where a recycling company (RC) is in competition with a virgin-raw-material-using company (VC). The strategies of the VC, for increasing its market share, are the strengthening of (and advertisement based on) the high quality (VC1), the high reliability (VC2), the combination quality and reliability, putting emphasis on the first component (VC3), the combination quality and reliability, putting emphasis on the second component (VC4). The strategies of the RC, for increasing its market share, are proper advertisement based on the low price of produced recycled paper satisfying minimum quality requirements (RC1), the combination of low price with sensitization of the public as regards environmental and materials-saving issues, putting emphasis on the first component (RC2), the same combination, putting emphasis on the second component (RC3). Analysis of all possible situations for the case example under examination is also presented.

Error-proneness as a handicap signal.

PubMed

De Jaegher, Kris

2003-09-21

This paper describes two discrete signalling models in which the error-proneness of signals can serve as a handicap signal. In the first model, the direct handicap of sending a high-quality signal is not large enough to assure that a low-quality signaller will not send it. However, if the receiver sometimes mistakes a high-quality signal for a low-quality one, then there is an indirect handicap to sending a high-quality signal. The total handicap of sending such a signal may then still be such that a low-quality signaller would not want to send it. In the second model, there is no direct handicap of sending signals, so that nothing would seem to stop a signaller from always sending a high-quality signal. However, the receiver sometimes fails to detect signals, and this causes an indirect handicap of sending a high-quality signal that still stops the low-quality signaller of sending such a signal. The conditions for honesty are that the probability of an error of detection is higher for a high-quality than for a low-quality signal, and that the signaller who does not detect a signal adopts a response that is bad to the signaller. In both our models, we thus obtain the result that signal accuracy should not lie above a certain level in order for honest signalling to be possible. Moreover, we show that the maximal accuracy that can be achieved is higher the lower the degree of conflict between signaller and receiver. As well, we show that it is the conditions for honest signalling that may be constraining signal accuracy, rather than the signaller trying to make honest signals as effective as possible given receiver psychology, or the signaller adapting the accuracy of honest signals depending on his interests.

The effects of placing an operational research fellow within the Viet Nam National Tuberculosis Programme.

PubMed

Hoa, N B; Nhung, N V; Kumar, A M V; Harries, A D

2016-12-21

In April 2009, an operational research fellow was placed within the Viet Nam National Tuberculosis Control Programme (NTP). Over the 6 years from 2010 to 2015, the OR fellow co-authored 21 tuberculosis research papers (as principal author in 15 [71%]). This constituted 23% of the 91 tuberculosis papers published in Viet Nam during this period. Of the 21 published papers, 16 (76%) contributed to changes in policy ( n = 8) and practice ( n = 8), and these in turn improved programme performance. Many papers also contributed important evidence for better programme planning. Highly motivated OR fellows embedded within NTPs can facilitate high-quality research and research uptake.

Reporting and methodological quality of meta-analyses in urological literature

PubMed Central

Xu, Jing

2017-01-01

Purpose To assess the overall quality of published urological meta-analyses and identify predictive factors for high quality. Materials and Methods We systematically searched PubMed to identify meta-analyses published from January 1st, 2011 to December 31st, 2015 in 10 predetermined major paper-based urology journals. The characteristics of the included meta-analyses were collected, and their reporting and methodological qualities were assessed by the PRISMA checklist (27 items) and AMSTAR tool (11 items), respectively. Descriptive statistics were used for individual items as a measure of overall compliance, and PRISMA and AMSTAR scores were calculated as the sum of adequately reported domains. Logistic regression was used to identify predictive factors for high qualities. Results A total of 183 meta-analyses were included. The mean PRISMA and AMSTAR scores were 22.74 ± 2.04 and 7.57 ± 1.41, respectively. PRISMA item 5, protocol and registration, items 15 and 22, risk of bias across studies, items 16 and 23, additional analysis had less than 50% adherence. AMSTAR item 1, “a priori” design, item 5, list of studies and item 10, publication bias had less than 50% adherence. Logistic regression analyses showed that funding support and “a priori” design were associated with superior reporting quality, following PRISMA guideline and “a priori” design were associated with superior methodological quality. Conclusions Reporting and methodological qualities of recently published meta-analyses in major paper-based urology journals are generally good. Further improvement could potentially be achieved by strictly adhering to PRISMA guideline and having “a priori” protocol. PMID:28439452

Television, Learning and Distance Education. IET Paper No. 262.

ERIC Educational Resources Information Center

Bates, A. W.

This lecture considers the effectiveness of television as a medium for distance education in light of the experiences of the Open University in Great Britain. The main theses of the paper are that television is an important component of high quality open and distance education, but only when its unique teaching characteristics are exploited, and…

NAPLAN, MySchool and Accountability: Teacher Perceptions of the Effects of Testing

ERIC Educational Resources Information Center

Thompson, Greg

2013-01-01

This paper explores Rizvi and Lingard's (2010) idea of the "local vernacular" of the global education policy trend of using high-stakes testing to increase accountability and transparency, and by extension quality, within schools and education systems in Australia. In the first part of the paper a brief context of the policy trajectory…

Challenges for Higher Education and Research: A Perspective from Japan

ERIC Educational Resources Information Center

Huang, Futao

2014-01-01

The aim of this paper is to identify key challenges facing Japan's higher education since the early 1990s and their impacts on major research themes. In this paper key challenges include those resulting from the decline in the 18-year population, the cultivation of high-quality university graduates, the incorporation of national universities, the…

Schooling for Self-Determination through a Justice Politics of Indigenous Representation

ERIC Educational Resources Information Center

Keddie, Amanda

2013-01-01

This paper presents data from a study of secondary school for girls, the majority of whom identify as Indigenous Australian. "Gamarada" High School is located in a suburban area of Queensland (Australia) and was established to provide quality education for disadvantaged girls. The paper draws on student and teacher interview data from a…

High quality fuel gas from biomass pyrolysis with calcium oxide.

PubMed

Zhao, Baofeng; Zhang, Xiaodong; Chen, Lei; Sun, Laizhi; Si, Hongyu; Chen, Guanyi

2014-03-01

The removal of CO2 and tar in fuel gas produced by biomass thermal conversion has aroused more attention due to their adverse effects on the subsequent fuel gas application. High quality fuel gas production from sawdust pyrolysis with CaO was studied in this paper. The results of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments indicate that the mass ratio of CaO to sawdust (Ca/S) remarkably affects the behavior of sawdust pyrolysis. On the basis of Py-GC/MS results, one system of a moving bed pyrolyzer coupled with a fluid bed combustor has been developed to produce high quality fuel gas. The lower heating value (LHV) of the fuel gas was above 16MJ/Nm(3) and the content of tar was under 50mg/Nm(3), which is suitable for gas turbine application to generate electricity and heat. Therefore, this technology may be a promising route to achieve high quality fuel gas for biomass utilization. Copyright © 2014 Elsevier Ltd. All rights reserved.

In-situ and real-time growth observation of high-quality protein crystals under quasi-microgravity on earth.

PubMed

Nakamura, Akira; Ohtsuka, Jun; Kashiwagi, Tatsuki; Numoto, Nobutaka; Hirota, Noriyuki; Ode, Takahiro; Okada, Hidehiko; Nagata, Koji; Kiyohara, Motosuke; Suzuki, Ei-Ichiro; Kita, Akiko; Wada, Hitoshi; Tanokura, Masaru

2016-02-26

Precise protein structure determination provides significant information on life science research, although high-quality crystals are not easily obtained. We developed a system for producing high-quality protein crystals with high throughput. Using this system, gravity-controlled crystallization are made possible by a magnetic microgravity environment. In addition, in-situ and real-time observation and time-lapse imaging of crystal growth are feasible for over 200 solution samples independently. In this paper, we also report results of crystallization experiments for two protein samples. Crystals grown in the system exhibited magnetic orientation and showed higher and more homogeneous quality compared with the control crystals. The structural analysis reveals that making use of the magnetic microgravity during the crystallization process helps us to build a well-refined protein structure model, which has no significant structural differences with a control structure. Therefore, the system contributes to improvement in efficiency of structural analysis for "difficult" proteins, such as membrane proteins and supermolecular complexes.

A Systematic Process for Developing High Quality SaaS Cloud Services

NASA Astrophysics Data System (ADS)

La, Hyun Jung; Kim, Soo Dong

Software-as-a-Service (SaaS) is a type of cloud service which provides software functionality through Internet. Its benefits are well received in academia and industry. To fully utilize the benefits, there should be effective methodologies to support the development of SaaS services which provide high reusability and applicability. Conventional approaches such as object-oriented methods do not effectively support SaaS-specific engineering activities such as modeling common features, variability, and designing quality services. In this paper, we present a systematic process for developing high quality SaaS and highlight the essentiality of commonality and variability (C&V) modeling to maximize the reusability. We first define criteria for designing the process model and provide a theoretical foundation for SaaS; its meta-model and C&V model. We clarify the notion of commonality and variability in SaaS, and propose a SaaS development process which is accompanied with engineering instructions. Using the proposed process, SaaS services with high quality can be effectively developed.

High-resolution spatial modeling of daily weather elements for a catchment in the Oregon Cascade Mountains, United States

Treesearch

Christopher Daly; Jonathan W. Smith; Joseph I. Smith; Robert B. McKane

2007-01-01

High-quality daily meteorological data at high spatial resolution are essential for a variety of hydrologic and ecological modeling applications that support environmental risk assessments and decisionmaking. This paper describes the development. application. and assessment of methods to construct daily high resolution (~50-m cell size) meteorological grids for the...

Inspection and characterization of flexo-printing plates

NASA Astrophysics Data System (ADS)

Hahlweg, Cornelius; Pescoller, Lukas; Zhao, Wenjing

2013-09-01

In continuation of last year's paper on distorting optics for inspection of 2 1/2D surfaces with convex or elevated elements - like braille paper and other special printing products - the present paper is dedicated to the quality control and characterization of flexo-printing plates. The need for high optical resolution contradicts the need for depth of field. A rugged optical system for gathering a series of microscopic images at various planes of focus is discussed.

Beyond integration: challenges for children's mental health.

PubMed

Knitzer, Jane; Cooper, Janice

2006-01-01

This paper reviews access, outcomes, and quality in the children's mental health system. We contend that a major focal point of future reforms should be at the organization level of care delivery. We identify five areas for intentional policy action to better infuse quality into the system. We also call for building upon the momentum of recent high-visibility reform proposals and for renewed advocacy to advance quality-linked perspectives into the children's mental health system beyond its focus on children with severe emotional disturbances.

Automatic non-destructive system for quality assurance of welded elements in the aircraft industry

NASA Astrophysics Data System (ADS)

Chady, Tomasz; Waszczuk, Paweł; Szydłowski, Michał; Szwagiel, Mariusz

2018-04-01

Flaws that might be a result of the welding process have to be detected, in order to assure high quality thus reliability of elements exploited in aircraft industry. Currently the inspection stage is conducted manually by a qualified workforce. There are no commercially available systems that could support or replace humans in the flaw detection process. In this paper authors present a novel non-destructive system developed for quality assurance purposes of welded elements utilized in the aircraft industry.

An Overview of Controls and Flying Qualities Technology on the F/A-18 High Alpha Research Vehicle

NASA Technical Reports Server (NTRS)

Pahle, Joseph W.; Wichman, Keith D.; Foster, John V.; Bundick, W. Thomas

1996-01-01

The NASA F/A-18 High Alpha Research Vehicle (HARV) has been the flight test bed of a focused technology effort to significantly increase maneuvering capability at high angles of attack. Development and flight test of control law design methodologies, handling qualities metrics, performance guidelines, and flight evaluation maneuvers are described. The HARV has been modified to include two research control effectors, thrust vectoring, and actuated forebody strakes in order to provide increased control power at high angles of attack. A research flight control system has been used to provide a flexible, easily modified capability for high-angle-of-attack research controls. Different control law design techniques have been implemented and flight-tested, including eigenstructure assignment, variable gain output feedback, pseudo controls, and model-following. Extensive piloted simulation has been used to develop nonlinear performance guide-lines and handling qualities criteria for high angles of attack. This paper reviews the development and evaluation of technologies useful for high-angle-of-attack control. Design, development, and flight test of the research flight control system, control laws, flying qualities specifications, and flight test maneuvers are described. Flight test results are used to illustrate some of the lessons learned during flight test and handling qualities evaluations.

Management of source and drinking-water quality in Pakistan.

PubMed

Aziz, J A

2005-01-01

Drinking-water quality in both urban and rural areas of Pakistan is not being managed properly. Results of various investigations provide evidence that most of the drinking-water supplies are faecally contaminated. At places groundwater quality is deteriorating due to the naturally occurring subsoil contaminants or to anthropogenic activities. The poor bacteriological quality of drinking-water has frequently resulted in high incidence of waterborne diseases while subsoil contaminants have caused other ailments to consumers. This paper presents a detailed review of drinking-water quality in the country and the consequent health impacts. It identifies various factors contributing to poor water quality and proposes key actions required to ensure safe drinking-water supplies to consumers.

Profile parameters of wheelset detection for high speed freight train

NASA Astrophysics Data System (ADS)

Yang, Kai; Ma, Li; Gao, Xiaorong; Wang, Li

2012-04-01

Because of freight train, in China, transports goods on railway freight line throughout the country, it does not depart from or return to engine shed during a long phase, thus we cannot monitor the quality of wheel set effectively. This paper provides a system which uses leaser and high speed camera, applies no-contact light section technology to get precise wheel set profile parameters. The paper employs clamping-track method to avoid complex railway ballast modification project. And detailed descript an improved image-tracking algorithm to extract central line from profile curve. For getting one pixel width and continuous line of the profile curve, uses local gray maximum points as direction control points to direct tracking direction. The results based on practical experiment show the system adapted to detection environment of high speed and high vibration, and it can effectively detect the wheelset geometric parameters with high accuracy. The system fills the gaps in wheel set detection for freight train in main line and has an enlightening function on monitoring the quality of wheel set.

1030 nm high power polarization maintained fiber laser with narrow linewidth and near-diffraction-limited beam quality

NASA Astrophysics Data System (ADS)

Chu, Qiuhui; Zhao, Pengfei; Li, Chengyu; Wang, Bopeng; Lin, Honghuan; Guo, Chao; Liu, Yu; Jing, Feng; Tang, Chuanxiang

2018-03-01

A high power 1030 nm ytterbium-doped polarization maintained fiber laser with optimized parameters is presented in this paper. The master oscillator power amplifier system with counter-pumped amplifier is established. The output power is 900 W, along with a light-to-light efficiency of 64.2%. The amplified spontaneous emission suppression ratio of spectrum reaches to 40 dB with 3 dB linewidth of 0.14 nm. The polarization extinction ratio is 12 dB, and the beam quality factor is M2x=1.07, M2y=1.12. To the best of our knowledge, this is the first demonstration of 1030 nm high power fiber laser with narrow linewidth, near linear polarization, and neardiffraction-limited beam quality

Professional failure to thrive: a threat to high-quality care?

PubMed

Stamler, Lynnette Leeseberg; Gabriel, Aaron M

2010-03-01

The term professional failure to thrive arose from descriptions of non-organic failure to thrive in infants and observations of nurses' behaviours. First coined by Stamler in 1997, subsequent unrelated research results have supported the theoretical construct. In an era when patient safety and high-quality care have never been more important, and nursing retention has reached heretofore unknown levels of global concern, critical examination of factors that may alleviate professional issues and support high-quality healthcare is especially useful. In this paper, we suggest theoretical causes for professional failure to thrive (PFTT) and associated behaviours exhibited by nurses, and draw links to current research to support the theory. Given the theoretical support, PFTT represents an additional avenue that should be considered and explored through research studies.

Resource quality or competition: why increase resource acceptance in the presence of conspecifics?

PubMed Central

Nufio, César R.; Papaj, Daniel R.

2011-01-01

Some animal species increase resource acceptance rates in the presence of conspecifics. Such responses may be adaptive if the presence of conspecifics is a reliable indicator of resource quality. Similarly, these responses could represent an adaptive reduction in choosiness under high levels of scramble competition. Although high resource quality and high levels of scramble competition should both favor increased resource acceptance, the contexts in which the increase occurs should differ. In this paper, we tested the effect of social environment on egg-laying and aggressive behavior in the walnut fly, Rhagoletis juglandis, in multiple contexts to determine whether increased resource acceptance in the presence of conspecifics was better viewed as a response to increased host quality or increased competition. We found that grouped females oviposit more readily than isolated females when provided small (low-quality) artificial hosts but not when provided large (high-quality) artificial hosts, indicating that conspecific presence reduces choosiness. Increased resource acceptance was observed even when exposure to conspecifics was temporally or spatially separate from exposure to the resource. Finally, we found that individuals showed reduced aggression after being housed in groups, as expected under high levels of scramble competition. These results indicate that the pattern of resource acceptance in the presence of conspecifics may be better viewed as a response to increased scramble competition rather than as a response to public information about resource quality. PMID:22479135

Resource quality or competition: why increase resource acceptance in the presence of conspecifics?

PubMed

Davis, Jeremy M; Nufio, César R; Papaj, Daniel R

2011-07-01

Some animal species increase resource acceptance rates in the presence of conspecifics. Such responses may be adaptive if the presence of conspecifics is a reliable indicator of resource quality. Similarly, these responses could represent an adaptive reduction in choosiness under high levels of scramble competition. Although high resource quality and high levels of scramble competition should both favor increased resource acceptance, the contexts in which the increase occurs should differ. In this paper, we tested the effect of social environment on egg-laying and aggressive behavior in the walnut fly, Rhagoletis juglandis, in multiple contexts to determine whether increased resource acceptance in the presence of conspecifics was better viewed as a response to increased host quality or increased competition. We found that grouped females oviposit more readily than isolated females when provided small (low-quality) artificial hosts but not when provided large (high-quality) artificial hosts, indicating that conspecific presence reduces choosiness. Increased resource acceptance was observed even when exposure to conspecifics was temporally or spatially separate from exposure to the resource. Finally, we found that individuals showed reduced aggression after being housed in groups, as expected under high levels of scramble competition. These results indicate that the pattern of resource acceptance in the presence of conspecifics may be better viewed as a response to increased scramble competition rather than as a response to public information about resource quality.

Moving Forward--Shaping a Career Development Culture: Quality Standards, Quality Practice, Quality Outcomes

ERIC Educational Resources Information Center

McMahon, Mary

2004-01-01

This paper represents the second of two papers written as part of the National Standards and Accreditation of Career Practitioners project. The first, a scoping paper titled Shaping a career development culture: Quality standards, quality practice, quality outcomes (McMahon, 2004), provided information for and guided discussion at the National…

Comparison of approaches to Total Quality Management. Including an examination of the Department of Energy`s position on quality management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bennett, C.T.

1994-03-01

This paper presents a comparison of several qualitatively different approaches to Total Quality Management (TQM). The continuum ranges from management approaches that are primarily standards -- with specific guidelines, but few theoretical concepts -- to approaches that are primarily philosophical, with few specific guidelines. The approaches to TQM discussed in this paper include the International Organization for Standardization (ISO) 9000 Standard, the Malcolm Baldrige National Quality Award, Senge`s the Learning Organization, Watkins and Marsick`s approach to organizational learning, Covey`s Seven Habits of Highly Successful People, and Deming`s Fourteen Points for Management. Some of these approaches (Deming and ISO 9000) aremore » then compared to the DOE`s official position on quality management and conduct of operations (DOE Orders 5700.6C and 5480.19). Using a tabular format, it is shown that while 5700.6C (Quality Assurance) maps well to many of the current approaches to TQM, DOE`s principle guide to management Order 5419.80 (Conduct of Operations) has many significant conflicts with some of the modern approaches to continuous quality improvement.« less

Randomly auditing research labs could be an affordable way to improve research quality: A simulation study

PubMed Central

Zardo, Pauline; Graves, Nicholas

2018-01-01

The “publish or perish” incentive drives many researchers to increase the quantity of their papers at the cost of quality. Lowering quality increases the number of false positive errors which is a key cause of the reproducibility crisis. We adapted a previously published simulation of the research world where labs that produce many papers are more likely to have “child” labs that inherit their characteristics. This selection creates a competitive spiral that favours quantity over quality. To try to halt the competitive spiral we added random audits that could detect and remove labs with a high proportion of false positives, and also improved the behaviour of “child” and “parent” labs who increased their effort and so lowered their probability of making a false positive error. Without auditing, only 0.2% of simulations did not experience the competitive spiral, defined by a convergence to the highest possible false positive probability. Auditing 1.35% of papers avoided the competitive spiral in 71% of simulations, and auditing 1.94% of papers in 95% of simulations. Audits worked best when they were only applied to established labs with 50 or more papers compared with labs with 25 or more papers. Adding a ±20% random error to the number of false positives to simulate peer reviewer error did not reduce the audits’ efficacy. The main benefit of the audits was via the increase in effort in “child” and “parent” labs. Audits improved the literature by reducing the number of false positives from 30.2 per 100 papers to 12.3 per 100 papers. Auditing 1.94% of papers would cost an estimated $15.9 million per year if applied to papers produced by National Institutes of Health funding. Our simulation greatly simplifies the research world and there are many unanswered questions about if and how audits would work that can only be addressed by a trial of an audit. PMID:29649314

Randomly auditing research labs could be an affordable way to improve research quality: A simulation study.

PubMed

Barnett, Adrian G; Zardo, Pauline; Graves, Nicholas

2018-01-01

The "publish or perish" incentive drives many researchers to increase the quantity of their papers at the cost of quality. Lowering quality increases the number of false positive errors which is a key cause of the reproducibility crisis. We adapted a previously published simulation of the research world where labs that produce many papers are more likely to have "child" labs that inherit their characteristics. This selection creates a competitive spiral that favours quantity over quality. To try to halt the competitive spiral we added random audits that could detect and remove labs with a high proportion of false positives, and also improved the behaviour of "child" and "parent" labs who increased their effort and so lowered their probability of making a false positive error. Without auditing, only 0.2% of simulations did not experience the competitive spiral, defined by a convergence to the highest possible false positive probability. Auditing 1.35% of papers avoided the competitive spiral in 71% of simulations, and auditing 1.94% of papers in 95% of simulations. Audits worked best when they were only applied to established labs with 50 or more papers compared with labs with 25 or more papers. Adding a ±20% random error to the number of false positives to simulate peer reviewer error did not reduce the audits' efficacy. The main benefit of the audits was via the increase in effort in "child" and "parent" labs. Audits improved the literature by reducing the number of false positives from 30.2 per 100 papers to 12.3 per 100 papers. Auditing 1.94% of papers would cost an estimated $15.9 million per year if applied to papers produced by National Institutes of Health funding. Our simulation greatly simplifies the research world and there are many unanswered questions about if and how audits would work that can only be addressed by a trial of an audit.

Artificial neural network modeling of the water quality index using land use areas as predictors.

PubMed

Gazzaz, Nabeel M; Yusoff, Mohd Kamil; Ramli, Mohammad Firuz; Juahir, Hafizan; Aris, Ahmad Zaharin

2015-02-01

This paper describes the design of an artificial neural network (ANN) model to predict the water quality index (WQI) using land use areas as predictors. Ten-year records of land use statistics and water quality data for Kinta River (Malaysia) were employed in the modeling process. The most accurate WQI predictions were obtained with the network architecture 7-23-1; the back propagation training algorithm; and a learning rate of 0.02. The WQI forecasts of this model had significant (p < 0.01), positive, very high correlation (ρs = 0.882) with the measured WQI values. Sensitivity analysis revealed that the relative importance of the land use classes to WQI predictions followed the order: mining > rubber > forest > logging > urban areas > agriculture > oil palm. These findings show that the ANNs are highly reliable means of relating water quality to land use, thus integrating land use development with river water quality management.

Back-Up Childcare: A Quality Alternative to Regular Care Which Fosters Resilience in Infants and Toddlers.

ERIC Educational Resources Information Center

La Bar, Nicole J.

To many in the field of early care and education, back-up child care may be viewed as a stressful disruption that could interfere with attachment and be detrimental to continuity of care. This paper attempts to prove that high-quality back-up child care offered by employers actually fosters the development of resiliency in young children by…

Key Challenges in the Reform of Governance, Quality Assurance, and Finance in Vietnamese Higher Education--A Case Study

ERIC Educational Resources Information Center

Dao, Khanh Van

2015-01-01

Vietnam's higher education is highly centralized in terms of its governance and management. A couple of higher education reform plans have been introduced over the past decade but they seem to result in poor outcomes. This paper addresses the challenges faced in the areas of governance, quality assurance and finance by a "key" university…

Knowledge, Skills, and Abilities of Youth Service Practitioners: The Centerpiece of a Successful Workforce Development System. A Background Paper

ERIC Educational Resources Information Center

McCain, Mary; Gill, Patricia; Wills, Joan; Larson, Mindy

2004-01-01

This paper provides baseline information for the National Collaborative on Workforce and Disability for Youth (NCWD/Youth) to fulfill its overall mission: To ensure that youth with disabilities are provided full access to high quality services in integrated settings in order to maximize their opportunity for employment and independent living. It…

Class Size and Sorting in Market Equilibrium: Theory and Evidence. NBER Working Paper No. 13303

ERIC Educational Resources Information Center

Urquiola, Miguel; Verhoogen, Eric

2007-01-01

This paper examines how schools choose class size and how households sort in response to those choices. Focusing on the highly liberalized Chilean education market, we develop a model in which schools are heterogeneous in an underlying productivity parameter, class size is a component of school quality, households are heterogeneous in income and…

A Structured Writing Programme for Staff: Facilitating Knowledge, Skills, Confidence and Publishing Outcomes

ERIC Educational Resources Information Center

Devlin, Marcia; Radloff, Alex

2014-01-01

The growing interest in the higher education sector in publishing pedagogical research has led to a focus on professional development for staff who wish to engage in this endeavour. This paper describes and evaluates a specific programme designed to help university staff to prepare and submit a high-quality paper to a peer-reviewed journal.…

Daigaku Nyugakusha Senbatsu Hoho ni kansuru Kenkyu' (Research on Examination for Entrance into Universities).

ERIC Educational Resources Information Center

Bulletin, 1969

1969-01-01

This document is an English-language abstract (approximately 1,500 words) of a series of research papers on the selection of college and university students. One paper compared the scores gained by three different types of entrants to six universities attracting applicants of high quality. It was found that a candidate has almost no chance of…

Quantity and/or Quality? The Importance of Publishing Many Papers

PubMed Central

van den Besselaar, Peter

2016-01-01

Do highly productive researchers have significantly higher probability to produce top cited papers? Or do high productive researchers mainly produce a sea of irrelevant papers—in other words do we find a diminishing marginal result from productivity? The answer on these questions is important, as it may help to answer the question of whether the increased competition and increased use of indicators for research evaluation and accountability focus has perverse effects or not. We use a Swedish author disambiguated dataset consisting of 48.000 researchers and their WoS-publications during the period of 2008–2011 with citations until 2014 to investigate the relation between productivity and production of highly cited papers. As the analysis shows, quantity does make a difference. PMID:27870854

Methods for slow axis beam quality improvement of high power broad area diode lasers

NASA Astrophysics Data System (ADS)

An, Haiyan; Xiong, Yihan; Jiang, Ching-Long J.; Schmidt, Berthold; Treusch, Georg

2014-03-01

For high brightness direct diode laser systems, it is of fundamental importance to improve the slow axis beam quality of the incorporated laser diodes regardless what beam combining technology is applied. To further advance our products in terms of increased brightness at a high power level, we must optimize the slow axis beam quality despite the far field blooming at high current levels. The later is caused predominantly by the built-in index step in combination with the thermal lens effect. Most of the methods for beam quality improvements reported in publications sacrifice the device efficiency and reliable output power. In order to improve the beam quality as well as maintain the efficiency and reliable output power, we investigated methods of influencing local heat generation to reduce the thermal gradient across the slow axis direction, optimizing the built-in index step and discriminating high order modes. Based on our findings, we have combined different methods in our new device design. Subsequently, the beam parameter product (BPP) of a 10% fill factor bar has improved by approximately 30% at 7 W/emitter without efficiency penalty. This technology has enabled fiber coupled high brightness multi-kilowatt direct diode laser systems. In this paper, we will elaborate on the methods used as well as the results achieved.

Reputation and Competition in a Hidden Action Model

PubMed Central

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium. PMID:25329387

Reputation and competition in a hidden action model.

PubMed

Fedele, Alessandro; Tedeschi, Piero

2014-01-01

The economics models of reputation and quality in markets can be classified in three categories. (i) Pure hidden action, where only one type of seller is present who can provide goods of different quality. (ii) Pure hidden information, where sellers of different types have no control over product quality. (iii) Mixed frameworks, which include both hidden action and hidden information. In this paper we develop a pure hidden action model of reputation and Bertrand competition, where consumers and firms interact repeatedly in a market with free entry. The price of the good produced by the firms is contractible, whilst the quality is noncontractible, hence it is promised by the firms when a contract is signed. Consumers infer future quality from all available information, i.e., both from what they know about past quality and from current prices. According to early contributions, competition should make reputation unable to induce the production of high-quality goods. We provide a simple solution to this problem by showing that high quality levels are sustained as an outcome of a stationary symmetric equilibrium.

[Fast Detection of Camellia Sinensis Growth Process and Tea Quality Informations with Spectral Technology: A Review].

PubMed

Peng, Ji-yu; Song, Xing-lin; Liu, Fei; Bao, Yi-dan; He, Yong

2016-03-01

The research achievements and trends of spectral technology in fast detection of Camellia sinensis growth process information and tea quality information were being reviewed. Spectral technology is a kind of fast, nondestructive, efficient detection technology, which mainly contains infrared spectroscopy, fluorescence spectroscopy, Raman spectroscopy and mass spectroscopy. The rapid detection of Camellia sinensis growth process information and tea quality is helpful to realize the informatization and automation of tea production and ensure the tea quality and safety. This paper provides a review on its applications containing the detection of tea (Camellia sinensis) growing status(nitrogen, chlorophyll, diseases and insect pest), the discrimination of tea varieties, the grade discrimination of tea, the detection of tea internal quality (catechins, total polyphenols, caffeine, amino acid, pesticide residual and so on), the quality evaluation of tea beverage and tea by-product, the machinery of tea quality determination and discrimination. This paper briefly introduces the trends of the technology of the determination of tea growth process information, sensor and industrial application. In conclusion, spectral technology showed high potential to detect Camellia sinensis growth process information, to predict tea internal quality and to classify tea varieties and grades. Suitable chemometrics and preprocessing methods is helpful to improve the performance of the model and get rid of redundancy, which provides the possibility to develop the portable machinery. Future work is to develop the portable machinery and on-line detection system is recommended to improve the further application. The application and research achievement of spectral technology concerning about tea were outlined in this paper for the first time, which contained Camellia sinensis growth, tea production, the quality and safety of tea and by-produce and so on, as well as some problems to be solved and its future applicability in modern tea industrial.

Beam control of high-power broad-area photonic crystal lasers using ladderlike groove structure

NASA Astrophysics Data System (ADS)

Wang, Tao; Wang, Lijie; Shu, Shili; Tian, Sicong; Lu, Zefeng; Hou, Guanyu; Lu, Huanyu; Tong, Cunzhu; Wang, Lijun

2017-06-01

The high-power broad-area (BA) photonic bandgap crystal (PBC) diode laser is promising as a high-brightness laser source, however, it suffers from poor lateral beam quality owing to the intrinsic drawback of BA lasers. In this paper, a ladderlike groove structure (LLGS) was proposed to improve both the lateral beam quality and emission power of BA PBC lasers. An approximately 15.4% improvement in output power and 25.2% decrease in the lateral beam parameter product (BPP) were realized and the underlying mechanism was discussed. On the basis of the one-dimensional PBC epitaxial structure, a stable vertical far field was demonstrated.

The resonant body transistor.

PubMed

Weinstein, Dana; Bhave, Sunil A

2010-04-14

This paper introduces the resonant body transistor (RBT), a silicon-based dielectrically transduced nanoelectromechanical (NEM) resonator embedding a sense transistor directly into the resonator body. Combining the benefits of FET sensing with the frequency scaling capabilities and high quality factors (Q) of internal dielectrically transduced bar resonators, the resonant body transistor achieves >10 GHz frequencies and can be integrated into a standard CMOS process for on-chip clock generation, high-Q microwave circuits, fundamental quantum-state preparation and observation, and high-sensitivity measurements. An 11.7 GHz bulk-mode RBT is demonstrated with a quality factor Q of 1830, marking the highest frequency acoustic resonance measured to date on a silicon wafer.

Importance-performance analysis as a guide for hospitals in improving their provision of services.

PubMed

Whynes, D K; Reed, G

1995-11-01

As a result of the 1990 National Health Services Act, hospitals now compete with one another to win service contracts. A high level of service quality represents an important ingredient of a successful competitive strategy, yet, in general, hospitals have little external information on which to base quality decisions. Specifically, in their efforts to win contracts from fundholding general practitioners, hospitals require information on that which these purchasers deem important with respect to quality, and on how these purchasers assess the quality of their current service performance. The problem is complicated by the fact that hospital service quality, in itself, is multi-dimensional. In other areas of economic activity, the information problem has been resolved by importance-performance analysis and this paper reports the findings of such an analysis conducted for hosptials in the Trent region. The importance and performance service quality ratings of fundholders were obtained from a questionnaire survey and used in a particular variant of importance-performance analysis, which possesses certain advantages over more conventional approaches. In addition to providing empirical data on the determinants of service quality, as perceived by the purchasers of hospital services, this paper demonstrates how such information can be successfully employed in a quality enhancement strategy.

Asian Care Certificate (ACC): a care quality assurance framework.

PubMed

Talaie, Tony

2018-04-16

Purpose Quality assuring elderly care through a viable and feasible standard framework is a major challenge for Asian governments. Although several attempts have been made to tackle foreign care worker (FCW) shortage, assuring the quality of the care they provide has been overlooked. The original framework allowed a better control over service quality to assure the elderly about their care according to the agreed standards. The paper aims to discuss these issues. Design/methodology/approach Through several Japanese Governmental meetings, a new Asian Care Certificate (ACC) program is discussed based on the Japanese Care Certificate (JCC). The governments' representatives adopted the JCC to form the ACC, which enables the ACC board to evaluate care workers and to intervene whenever the desired quality level is not achieved. Findings The author describes a new program. The findings of this paper will be confirmed when the ACC is implemented. Practical implications Using the ACC framework, the challenge in providing a high-quality care service using FCWs across Asia would be partly resolved. FCWs' quality of life might also gradually improve especially regarding to their human rights. Originality/value The ACC provides a new framework. Its value is recognized if one considers that many Asian populations are rapidly aging and many governments compromise quality by employing overseas workers to solve care worker shortages.

[Quality Management for Surgeons: The Knowledge of Basic Contexts and Innovative Strategies Promotes the Competitiveness of Clinical Department].

PubMed

Hellmann, Wolfgang

2017-12-01

Efficient quality management aiming to achieve high quality in patient care is crucial to the success of a surgery department. This requires the knowledge of relevant terms und contexts of quality management. Implementation remains difficult in the light of demographic change and skills shortage. If a hospital has an efficient internal quality management in place, this should be used as a supplementary instrument. Otherwise it is the (sole) task of a specialist department to ensure quality for patients, employees, and cooperative partners. This paper provides basic knowledge on quality management, risk management, and quality assurance in the context of relevant medical terms. It demonstrates new ways for implementation on the level of a surgery department, and introduces a new model of quality. Georg Thieme Verlag KG Stuttgart · New York.

Data quality white paper.

DOT National Transportation Integrated Search

2008-06-01

This paper looks at the issue of data quality within the context of transportation operations and management. The objective of this paper is to investigate data quality measures and how they are applied in existing systems. This paper explores the re...

Teacher Quality at the High-School Level: The Importance of Accounting for Tracks. Working Paper 17722. Revised

ERIC Educational Resources Information Center

Jackson, C. Kirabo

2013-01-01

Unlike in elementary school, high-school teacher effects may be confounded with both selection to tracks and unobserved track-level treatments. I document sizable confounding track effects, and show that traditional tests for the existence of teacher effects are likely biased. After accounting for these biases, high-school algebra and English…

Guidelines for overcoming hospital managerial challenges: a systematic literature review

PubMed Central

Crema, Maria; Verbano, Chiara

2013-01-01

Purpose The need to respond to accreditation institutes’ and patients’ requirements and to align health care results with increased medical knowledge is focusing greater attention on quality in health care. Different tools and techniques have been adopted to measure and manage quality, but clinical errors are still too numerous, suggesting that traditional quality improvement systems are unable to deal appropriately with hospital challenges. The purpose of this paper is to grasp the current tools, practices, and guidelines adopted in health care to improve quality and patient safety and create a base for future research on this young subject. Methods A systematic literature review was carried out. A search of academic databases, including papers that focus not only on lean management, but also on clinical errors and risk reduction, yielded 47 papers. The general characteristics of the selected papers were analyzed, and a content analysis was conducted. Results A variety of managerial techniques, tools, and practices are being adopted in health care, and traditional methodologies have to be integrated with the latest ones in order to reduce errors and ensure high quality and patient safety. As it has been demonstrated, these tools are useful not only for achieving efficiency objectives, but also for providing higher quality and patient safety. Critical indications and guidelines for successful implementation of new health managerial methodologies are provided and synthesized in an operative scheme useful for extending and deepening knowledge of these issues with further studies. Conclusion This research contributes to introducing a new theme in health care literature regarding the development of successful projects with both clinical risk management and health lean management objectives, and should address solutions for improving health care even in the current context of decreasing resources. PMID:24307833

The disability paradox: high quality of life against all odds.

PubMed

Albrecht, G L; Devlieger, P J

1999-04-01

This paper builds on the work of Sol Levine to examine a disability paradox: Why do many people with serious and persistent disabilities report that they experience a good or excellent quality of life when to most external observers these individuals seem to live an undesirable daily existence? The paper uses a qualitative approach to develop an explanation of this paradox using semi-structured interviews with 153 persons with disabilities. 54.3% of the respondents with moderate to serious disabilities reported having an excellent or good quality of life confirming the existence of the disability paradox. Analysis of the interviews reveals that for both those who report that they have a good and those who say they have a poor quality of life, quality of life is dependent upon finding a balance between body, mind and spirit in the self and on establishing and maintaining an harmonious set of relationships within the person's social context and external environment. A theoretical framework is developed to express these relationships. The findings are discussed for those with and without disabilities and directions are given for future research.

The Continuing Violence towards Disabled People

ERIC Educational Resources Information Center

Capewell, Carmel; Ralph, Sue; Bonnett, Liz

2015-01-01

Western society places high value on physical beauty and grace of movement, and tends to shun those who do not have these qualities. Disability hate crime highlights the modern form of this violence. This paper uses the high-profile case of Fiona Pilkington to examine how disability hate crime can be dismissed until it results in tragic…

The Link between Teacher Quality and Student Outcomes: A Research Synthesis

ERIC Educational Resources Information Center

Goe, Laura

2007-01-01

Federal law emphasizes the need for states and districts to ensure that "all" students--particularly at-risk students, minority students, and students in high-poverty areas--have access to highly qualified, experienced teachers. But is it sufficient for a teacher to have "paper" qualifications and teaching experience? After all, appropriate…

Hunter New England Training (HNET): how to effect culture change in a psychiatry medical workforce.

PubMed

Cohen, Martin; Llewellyn, Anthony; Ditton-Phare, Philippa; Sandhu, Harsimrat; Vamos, Marina

2011-12-01

It is now recognized that education and training are at the core of quality systems in health care. In this paper we discuss the processes and drivers that underpinned the development of high quality education and training programs and placements for all junior doctors. The early identification and development of doctors interested in psychiatry as a career, engagement and co-operation with the broader junior doctor network and the creation of teaching opportunities for trainees that was linked to their stage of development were identified as key to the success of the program. Targeted, high quality education programs and clinical placements coupled with strategic development of workforce has reduced staff turn over, led to the stabilization of the medical workforce and created a culture where learning and supervision are highly valued.

Fragmentation of urban forms and the environmental consequences: results from a high-spatial resolution model system

NASA Astrophysics Data System (ADS)

Tang, U. W.; Wang, Z. S.

2008-10-01

Each city has its unique urban form. The importance of urban form on sustainable development has been recognized in recent years. Traditionally, air quality modelling in a city is in a mesoscale with grid resolution of kilometers, regardless of its urban form. This paper introduces a GIS-based air quality and noise model system developed to study the built environment of highly compact urban forms. Compared with traditional mesoscale air quality model system, the present model system has a higher spatial resolution down to individual buildings along both sides of the street. Applying the developed model system in the Macao Peninsula with highly compact urban forms, the average spatial resolution of input and output data is as high as 174 receptor points per km2. Based on this input/output dataset with a high spatial resolution, this study shows that even the highly compact urban forms can be fragmented into a very small geographic scale of less than 3 km2. This is due to the significant temporal variation of urban development. The variation of urban form in each fragment in turn affects air dispersion, traffic condition, and thus air quality and noise in a measurable scale.

Ambient optomechanical alignment and pupil metrology for the flight instruments aboard the James Webb Space Telescope

NASA Astrophysics Data System (ADS)

Coulter, Phillip; Beaton, Alexander; Gum, Jeffery S.; Hadjimichael, Theodore J.; Hayden, Joseph E.; Hummel, Susann; Hylan, Jason E.; Lee, David; Madison, Timothy J.; Maszkiewicz, Michael; Mclean, Kyle F.; McMann, Joseph; Melf, Markus; Miner, Linda; Ohl, Raymond G.; Redman, Kevin; Roedel, Andreas; Schweiger, Paul; Te Plate, Maurice; Wells, Martyn; Wenzel, Greg W.; Williams, Patrick K.; Young, Jerrod

2014-09-01

While efforts within the optics community focus on the development of high-quality systems and data products, comparatively little attention is paid to their use. Our standards for verification and validation are high; but in some user domains, standards are either lax or do not exist at all. In forensic imagery analysis, for example, standards exist to judge image quality, but do not exist to judge the quality of an analysis. In litigation, a high quality analysis is by default the one performed by the victorious attorney's expert. This paper argues for the need to extend quality standards into the domain of imagery analysis, which is expected to increase in national visibility and significance with the increasing deployment of unmanned aerial vehicle—UAV, or "drone"—sensors in the continental U. S.. It argues that like a good radiometric calibration, made as independent of the calibrated instrument as possible, a good analysis should be subject to standards the most basic of which is the separation of issues of scientific fact from analysis results.

Maximizing the Implementation Quality of Evidence-Based Preventive Interventions in Schools: A Conceptual Framework

PubMed Central

Domitrovich, Celene E.; Bradshaw, Catherine P.; Poduska, Jeanne M.; Hoagwood, Kimberly; Buckley, Jacquelyn A.; Olin, Serene; Romanelli, Lisa Hunter; Leaf, Philip J.; Greenberg, Mark T.; Ialongo, Nicholas S.

2011-01-01

Increased availability of research-supported, school-based prevention programs, coupled with the growing national policy emphasis on use of evidence-based practices, has contributed to a shift in research priorities from efficacy to implementation and dissemination. A critical issue in moving research to practice is ensuring high-quality implementation of both the intervention model and the support system for sustaining it. The paper describes a three-level framework for considering the implementation quality of school-based interventions. Future directions for research on implementation are discussed. PMID:27182282

SENSE IT: Teaching STEM Principles to Middle and High School Students through the Design, Construction and Deployment of Water Quality Sensors

ERIC Educational Resources Information Center

Hotaling, Liesl; Lowes, Susan; Stolkin, Rustam; Lin, Peiyi; Bonner, James; Kirkey, William; Ojo, Temitope

2012-01-01

This paper describes the structure and impact of an NSF-funded ITEST project designed to enrich science, technology, engineering, and mathematics (STEM) education using educational modules that teach students to construct, program, and test a series of sensors used to monitor water quality. During the two years of the SENSE IT project, over 30…

A Secure Test Technique for Pipelined Advanced Encryption Standard

NASA Astrophysics Data System (ADS)

Shi, Youhua; Togawa, Nozomu; Yanagisawa, Masao; Ohtsuki, Tatsuo

In this paper, we presented a Design-for-Secure-Test (DFST) technique for pipelined AES to guarantee both the security and the test quality during testing. Unlike previous works, the proposed method can keep all the secrets inside and provide high test quality and fault diagnosis ability as well. Furthermore, the proposed DFST technique can significantly reduce test application time, test data volume, and test generation effort as additional benefits.

Funding Early Years Education and Care: Can a Mixed Economy of Providers Deliver Universal High Quality Provision?

ERIC Educational Resources Information Center

West, Anne; Roberts, Jonathan; Noden, Philip

2010-01-01

There has been a focus on policies relating to early years education and care across the developed world and particularly in Europe. In the UK, there has been a raft of policy changes alongside increased investment. However, this paper argues that these changes may not be sufficient to meet EU objectives in terms of quality or the government's…

Feasible Application Area Study for Linear Laser Cutting in Paper Making Processes

NASA Astrophysics Data System (ADS)

Happonen, A.; Stepanov, A.; Piili, H.

Traditional industry sectors, like paper making industry, tend to stay within well-known technology rather than going forward towards promising, but still quite new technical solutions and applications. This study analyses the feasibility of the laser cutting in large-scale industrial paper making processes. Aim was to reveal development and process related challenges and improvement potential in paper making processes by utilizing laser technology. This study has been carried out, because there still seems to be only few large-scale industrial laser processing applications in paper converting processes worldwide, even in the beginning of 2010's. Because of this, the small-scale use of lasers in paper material manufacturing industry is related to a shortage of well-known and widely available published research articles and published measurement data (e.g. actual achieved cut speeds with high quality cut edges, set-up times and so on). It was concluded that laser cutting has strong potential in industrial applications for paper making industries. This potential includes quality improvements and a competitive advantage for paper machine manufacturers and industry. The innovations have also added potential, when developing new paper products. An example of these kinds of products are ones with printed intelligence, which could be a new business opportunity for the paper industries all around the world.

Pre-Scheduled and Self Organized Sleep-Scheduling Algorithms for Efficient K-Coverage in Wireless Sensor Networks

PubMed Central

Hwang, I-Shyan

2017-01-01

The K-coverage configuration that guarantees coverage of each location by at least K sensors is highly popular and is extensively used to monitor diversified applications in wireless sensor networks. Long network lifetime and high detection quality are the essentials of such K-covered sleep-scheduling algorithms. However, the existing sleep-scheduling algorithms either cause high cost or cannot preserve the detection quality effectively. In this paper, the Pre-Scheduling-based K-coverage Group Scheduling (PSKGS) and Self-Organized K-coverage Scheduling (SKS) algorithms are proposed to settle the problems in the existing sleep-scheduling algorithms. Simulation results show that our pre-scheduled-based KGS approach enhances the detection quality and network lifetime, whereas the self-organized-based SKS algorithm minimizes the computation and communication cost of the nodes and thereby is energy efficient. Besides, SKS outperforms PSKGS in terms of network lifetime and detection quality as it is self-organized. PMID:29257078

Monitoring the quality of welding based on welding current and ste analysis

NASA Astrophysics Data System (ADS)

Mazlan, Afidatusshimah; Daniyal, Hamdan; Izzani Mohamed, Amir; Ishak, Mahadzir; Hadi, Amran Abdul

2017-10-01

Qualities of welding play an important part in industry especially in manufacturing field. Post-welding non-destructive test is one of the importance process to ensure the quality of welding but it is time consuming and costly. To reduce the chance of defects, online monitoring had been utilized by continuously sense some of welding parameters and predict welding quality. One of the parameters is welding current, which is rich of information but lack of study focus on extract them at signal analysis level. This paper presents the analysis of welding current using Short Time Energy (STE) signal processing to quantify the pattern of the current. GMAW set with carbon steel specimens are used in this experimental study with high-bandwidth and high sampling rate oscilloscope capturing the welding current. The results indicate welding current as signatures have high correlation with the welding process. Continue with STE analysis, the value below 5000 is declare as good welding, meanwhile the STE value more than 6000 is contained defect.

Subjective evaluation of next-generation video compression algorithms: a case study

NASA Astrophysics Data System (ADS)

De Simone, Francesca; Goldmann, Lutz; Lee, Jong-Seok; Ebrahimi, Touradj; Baroncini, Vittorio

2010-08-01

This paper describes the details and the results of the subjective quality evaluation performed at EPFL, as a contribution to the effort of the Joint Collaborative Team on Video Coding (JCT-VC) for the definition of the next-generation video coding standard. The performance of 27 coding technologies have been evaluated with respect to two H.264/MPEG-4 AVC anchors, considering high definition (HD) test material. The test campaign involved a total of 494 naive observers and took place over a period of four weeks. While similar tests have been conducted as part of the standardization process of previous video coding technologies, the test campaign described in this paper is by far the most extensive in the history of video coding standardization. The obtained subjective quality scores show high consistency and support an accurate comparison of the performance of the different coding solutions.

Micro-optical fabrication by ultraprecision diamond machining and precision molding

NASA Astrophysics Data System (ADS)

Li, Hui; Li, Likai; Naples, Neil J.; Roblee, Jeffrey W.; Yi, Allen Y.

2017-06-01

Ultraprecision diamond machining and high volume molding for affordable high precision high performance optical elements are becoming a viable process in optical industry for low cost high quality microoptical component manufacturing. In this process, first high precision microoptical molds are fabricated using ultraprecision single point diamond machining followed by high volume production methods such as compression or injection molding. In the last two decades, there have been steady improvements in ultraprecision machine design and performance, particularly with the introduction of both slow tool and fast tool servo. Today optical molds, including freeform surfaces and microlens arrays, are routinely diamond machined to final finish without post machining polishing. For consumers, compression molding or injection molding provide efficient and high quality optics at extremely low cost. In this paper, first ultraprecision machine design and machining processes such as slow tool and fast too servo are described then both compression molding and injection molding of polymer optics are discussed. To implement precision optical manufacturing by molding, numerical modeling can be included in the future as a critical part of the manufacturing process to ensure high product quality.

The effect of texture granularity on texture synthesis quality

NASA Astrophysics Data System (ADS)

Golestaneh, S. Alireza; Subedar, Mahesh M.; Karam, Lina J.

2015-09-01

Natural and artificial textures occur frequently in images and in video sequences. Image/video coding systems based on texture synthesis can make use of a reliable texture synthesis quality assessment method in order to improve the compression performance in terms of perceived quality and bit-rate. Existing objective visual quality assessment methods do not perform satisfactorily when predicting the synthesized texture quality. In our previous work, we showed that texture regularity can be used as an attribute for estimating the quality of synthesized textures. In this paper, we study the effect of another texture attribute, namely texture granularity, on the quality of synthesized textures. For this purpose, subjective studies are conducted to assess the quality of synthesized textures with different levels (low, medium, high) of perceived texture granularity using different types of texture synthesis methods.

Highlighting impact: Do editors' selections identify influential papers?

NASA Astrophysics Data System (ADS)

Antonoyiannakis, Manolis

A recent trend in scientific publishing is that journal editors highlight each week a select set among the papers published (usually) in their respective journals. The highlighted papers are deemed of higher quality, importance, or interest than the 'average' paper and feature prominently in the publishers' websites. We perform a citation analysis of the highlighted papers for a number of journals from various publishers in physics. By comparing the performance of highlighted papers relative to (a) typical papers and (b) highly cited papers in their source journals and in other journals in the field, we explore whether, and to what extent, the selection process at the time of publication identifies papers that will turn out to be influential. We discuss the broader implications for research assessment.

Scientific publications on portal vein thrombosis and Budd-Chiari syndrome: a global survey of the literature.

PubMed

Qi, Xingshun; Jia, Jia; Ren, Weirong; Yang, Man; De Stefano, Valerio; Wang, Juan; Fan, Daiming

2014-03-01

Portal vein thrombosis (PVT) and Budd-Chiari syndrome (BCS) are two rare vascular disorders of the liver that can lead to life-threatening complications. We conducted a global survey to systematically analyze the scientific publications in the fields of PVT and BCS. All papers regarding PVT and BCS were identified via the PubMed, EMBASE, and Cochrane library databases. The publication year, country, type of paper, study design, and number of citations were summarized. Good quality papers were defined as those in which a high proportion of homogeneous patients with BCS and/or PVT was observed. We identified 6691 and 4325 papers regarding PVT and BCS, respectively. The number of papers gradually increased over time. Researchers from the USA published the greatest number of papers (PVT: n=1418; BCS: n=888). Clinical studies were the most common type of paper (PVT: n=5395; BCS n=3171), but fewer than half of these observed more than 10 patients (PVT: n=2667/5395; BCS: n=1092/3171). Furthermore, fewer than half of the clinical studies with more than 10 patients were of good quality (PVT: 976/2667; BCS: 466/1092). According to the study design, the good quality papers were classified as cohort studies (PVT: n=865; BCS: n=421), case-control studies (PVT: n=98; BCS: n=45), and randomized controlled trials (PVT: n=13; BCS: n=0). The 5 most frequently cited original articles and guidelines/consensuses were also listed. Despite an increase in the number of papers regarding PVT and BCS over time, most of the papers had a small sample size, suggesting the necessity of large cohort studies or randomized controlled trials.

Choice of Substrate Material for Epitaxial CdTe Solar Cells

DOE Office of Scientific and Technical Information (OSTI.GOV)

Song, Tao; Kanevce, Ana; Sites, James R.

2015-06-14

Epitaxial CdTe with high quality, low defect density, and high carrier concentration should in principle yield high-efficiency photovoltaic devices. However, insufficient effort has been given to explore the choice of substrate for high-efficiency epitaxial CdTe solar cells. In this paper, we use numerical simulations to investigate three crystalline substrates: silicon (Si), InSb, and CdTe each substrate material are generally discussed.

Postsecondary Plans of High-School Seniors in 1972 and 1980: Implications for Student Quality. AIR Forum 1982 Paper.

ERIC Educational Resources Information Center

Brown, Kenneth G.

The postsecondary educational plans of black and white high school seniors in the class of 1972 were compared with those in the same racial classification in the class of 1980. Data were extracted from the National Longitudinal Study of the High School Class of 1972 and from the survey entitled, "High School and Beyond." In order to test…

Impact of increased collection rates and the use of commingled collection systems on the quality of recovered paper. Part 1: increased collection rates.

PubMed

Miranda, Ruben; Monte, M; Blanco, Angeles

2011-11-01

The recovery and utilization of recovered paper have increased over past decades all over the world due to economic, environmental, and social issues. However, it is well known that an extended recovered paper collection is detrimental to its quality, either by the exploitation of lower quality sources such as households, or the spreading of commingled systems instead of selective collection systems. The influence of these two factors was assessed by analyzing the quality of different recovered paper grades used as raw material in a mill located in Madrid (Spain) producing newsprint and light weight coated paper from recovered paper. Part 1 of the paper deals with the impact of increased collection rates on the quality of recovered paper and Part 2 with the use of commingled collection systems. Results of Part 1 show that increased collection rates have a large impact on the quality of the recovered paper. The quality, measured as total unusable material and moisture contents, had deteriorated very rapidly in only 4 years (2005-2008) as a consequence of increased collection rates. Collection rates increased in Spain from 58.5% to 68.6% during this period, resulting in more than 50% increase of total unusable material and 25% of moisture content. The downgrading of the quality of recovered paper is one of the major threats for extending the current limits of paper recycling. Therefore, future challenge is to increase its availability but maintaining its quality. Copyright © 2011 Elsevier Ltd. All rights reserved.

A new strategy for accelerated extraction of target compounds using molecularly imprinted polymer particles embedded in a paper-based disk.

PubMed

Zarejousheghani, Mashaalah; Schrader, Steffi; Möder, Monika; Schmidt, Matthias; Borsdorf, Helko

2018-03-01

In this study, a general simple and inexpensive method is introduced for the preparation of a paper-based selective disk-type solid phase extraction (SPE) technique, appropriate for fast and high throughput monitoring of target compounds. An ion exchange molecularly imprinted polymer (MIP) was synthesized for the extraction and analysis of acesulfame, an anthropogenic water quality marker. Acesulfame imprinting was used as an example for demonstrating the benefits of a nanosized, swellable MIP extraction sorbents integrated in an on-site compatible concept for water quality monitoring. Compared with an 8 mL standard SPE cartridge, the paper-based MIP disk (47 mm ø) format allowed (1) high sample flow rates up to 30 mL•min -1 without losing extraction efficiency (2) extracting sample volumes up to 500 mL in much shorter times than with standard SPE, (3) the reuse of the disks (up to 3 times more than SPE cartridge) due to high robustness and an efficient post-cleaning, and (4) reducing the sampling time from 100 minutes (using the standard SPE format) to about 2 minutes with the MIP paper disk for 50 mL water sample. Different parameters like cellulose fiber/polymer ratios, sample volume, sample flow-rate, washing, and elution conditions were evaluated and optimized. Using developed extraction technique with high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS-MS) analysis, a new protocol was established that provides detection and quantification limits of 0.015 μg•L -1 and 0.05 μg•L -1 , respectively. The developed paper disks were used in-field for the selective extraction of target compounds and transferred to the laboratory for further analysis. Copyright © 2017 John Wiley & Sons, Ltd.

Geophysical insights on the GIA process provided by high-quality constraints from peripheral regions: An outlook on perspectives from North America and from the Mediterranean basin

NASA Astrophysics Data System (ADS)

Roy, K.; Peltier, W. R.

2017-12-01

Our understanding of the Earth-Ice-Ocean interactions that have accompanied the large glaciation-deglaciation process characteristic of the last half of the Pleistocene has benefited significantly from the development of high-quality models of the Glacial Isostatic Adjustment (GIA) process. These models provide fundamental insight on the large changes in sea level and land ice cover over this time period, as well as key constraints on the viscosity structure of the Earth's interior. Their development has benefited from the recent availability of high-quality constraints from regions of forebulge collapse. In particular, over North America, the joint use of high-quality sea level data from the U.S. East coast, together with the vast network of precise space-geodetic observations of crustal motion existing over most of the interior of the continent, has led to the latest ICE-7G_NA (VM7) model (Roy & Peltier, GJI, 2017). In this paper, exciting opportunities provided by such high-quality observations related to the GIA process will be discussed, not only in the context of the continuing effort to refine global models of this phenomenon, but also in terms of the fundamental insight they may provide on outstanding issues in high-pressure geophysics, paleoclimatology or hydrogeology. Specific examples where such high-quality observations can be used (either separately, or using a combination of independent sources) will be presented, focusing particularly on constraints from the North American continent and from the Mediterranean basin. This work will demonstrate that, given the high-quality of currently available constraints on the GIA process, considerable further geophysical insight can be obtained based upon the use of spherically-symmetric models of the viscosity structure of the planet.

Anti-bullying interventions in schools: a systematic literature review.

PubMed

Silva, Jorge Luiz da; Oliveira, Wanderlei Abadio de; Mello, Flávia Carvalho Malta de; Andrade, Luciane Sá de; Bazon, Marina Rezende; Silva, Marta Angélica Iossi

2017-07-01

This paper presents a systematic literature review addressing rigorously planned and assessed interventions intended to reduce school bullying. The search for papers was performed in four databases (Lilacs, Psycinfo, Scielo and Web of Science) and guided by the question: What are the interventions used to reduce bullying in schools? Only case-control studies specifically focusing on school bullying without a time frame were included. The methodological quality of investigations was assessed using the SIGN checklist. A total of 18 papers composed the corpus of analysis and all were considered to have high methodological quality. The interventions conducted in the revised studies were divided into four categories: multi-component or whole-school, social skills training, curricular, and computerized. The review synthesizes knowledge that can be used to contemplate practices and intervention programs in the education and health fields with a multidisciplinary nature.

High Density Aerial Image Matching: State-Of and Future Prospects

NASA Astrophysics Data System (ADS)

Haala, N.; Cavegn, S.

2016-06-01

Ongoing innovations in matching algorithms are continuously improving the quality of geometric surface representations generated automatically from aerial images. This development motivated the launch of the joint ISPRS/EuroSDR project "Benchmark on High Density Aerial Image Matching", which aims on the evaluation of photogrammetric 3D data capture in view of the current developments in dense multi-view stereo-image matching. Originally, the test aimed on image based DSM computation from conventional aerial image flights for different landuse and image block configurations. The second phase then put an additional focus on high quality, high resolution 3D geometric data capture in complex urban areas. This includes both the extension of the test scenario to oblique aerial image flights as well as the generation of filtered point clouds as additional output of the respective multi-view reconstruction. The paper uses the preliminary outcomes of the benchmark to demonstrate the state-of-the-art in airborne image matching with a special focus of high quality geometric data capture in urban scenarios.

Polyethersulfone-based ultrafiltration hollow fibre membrane for drinking water treatment systems

NASA Astrophysics Data System (ADS)

Chew, Chun Ming; Ng, K. M. David; Ooi, H. H. Richard

2017-12-01

Conventional media/sand filtration has been the mainstream water treatment process for most municipal water treatment plants in Malaysia. Filtrate qualities of conventional media/sand filtration are very much dependent on the coagulation-flocculation process prior to filtration and might be as high as 5 NTU. However, the demands for better quality of drinking water through public piped-water supply systems are growing. Polymeric ultrafiltration (UF) hollow fibre membrane made from modified polyethersulfone (PES) material is highly hydrophilic with high tensile strength and produces excellent quality filtrate of below 0.3 NTU in turbidity. This advanced membrane filtration material is also chemical resistance which allows a typical lifespan of 5 years. Comparisons between the conventional media/sand filtration and PES-based UF systems are carried out in this paper. UF has been considered as the emerging technology in municipal drinking water treatment plants due to its consistency in producing high quality filtrates even without the coagulation-flocculation process. The decreasing cost of PES-based membrane due to mass production and competitive pricing by manufacturers has made the UF technology affordable for industrial-scale water treatment plants.

Optimized ultra-thin manganin alloy passivated fine-pitch damascene compatible bump-less Cu-Cu bonding at sub 200 °C for three-dimensional Integration applications

NASA Astrophysics Data System (ADS)

Panigrahi, Asisa Kumar; Hemanth Kumar, C.; Bonam, Satish; Ghosh, Tamal; Rama Krishna Vanjari, Siva; Govind Singh, Shiv

2018-02-01

Enhanced Cu diffusion, Cu surface passivation, and smooth surface at the bonding interface are the key essentials for high quality Cu-Cu bonding. Previously, we have demonstrated optimized 3 nm thin Manganin metal-alloy passivation from oxidation and also helps to reduce the surface roughness to about 0.8 nm which substantially led to high quality Cu-Cu bonding. In this paper, we demonstrated an ultra fine-pitch (<25 µm) Cu-Cu bonding using an optimized Manganin metal-alloy passivation. This engineered surface passivation approach led to high quality bonding at sub 200 °C temperature and 0.4 MPa. Very low specific contact resistance of 1.4 × 10-7 Ω cm2 and the defect free bonded interface is clear indication of high quality bonding for future multilayer integrations. Furthermore, electrical characterization of the bonded structure was performed under various robust conditions as per International Technology Roadmap for Semiconductors (ITRS Roadmap) in order to satisfy the stability of the bonded structure.

Assessing product image quality for online shopping

NASA Astrophysics Data System (ADS)

Goswami, Anjan; Chung, Sung H.; Chittar, Naren; Islam, Atiq

2012-01-01

Assessing product-image quality is important in the context of online shopping. A high quality image that conveys more information about a product can boost the buyer's confidence and can get more attention. However, the notion of image quality for product-images is not the same as that in other domains. The perception of quality of product-images depends not only on various photographic quality features but also on various high level features such as clarity of the foreground or goodness of the background etc. In this paper, we define a notion of product-image quality based on various such features. We conduct a crowd-sourced experiment to collect user judgments on thousands of eBay's images. We formulate a multi-class classification problem for modeling image quality by classifying images into good, fair and poor quality based on the guided perceptual notions from the judges. We also conduct experiments with regression using average crowd-sourced human judgments as target. We compute a pseudo-regression score with expected average of predicted classes and also compute a score from the regression technique. We design many experiments with various sampling and voting schemes with crowd-sourced data and construct various experimental image quality models. Most of our models have reasonable accuracies (greater or equal to 70%) on test data set. We observe that our computed image quality score has a high (0.66) rank correlation with average votes from the crowd sourced human judgments.

The quality of dying and death measurement instruments: A systematic psychometric review.

PubMed

Gutiérrez Sánchez, Daniel; Pérez Cruzado, David; Cuesta-Vargas, Antonio I

2018-04-19

To identify instruments that could assess the quality of dying and death and their psychometric properties. To assess the methodological quality of studies on measurement properties. A high quality of death is regarded as a goal at the end of life and, therefore, an assessment of the end of life experience is essential. Many instruments have been developed to evaluate the quality of dying and death. The selection of the most appropriate measure to be used in clinical and research settings is crucial. Psychometric systematic review. We systematically searched ProQuest Medline, SciELO and ProQuest PsycINFO from 1970 - May 2016. Identification and evaluation of instruments that assessed quality of dying and death. Papers were evaluated by two independent reviewers according to the COSMIN checklist with a 4-point scale. A total of 19 studies were included in this review. Seven instruments were found that were specifically designed for assessing quality of dying and death. A retrospective carer proxy report to evaluate this construct was used in most of the papers. The methodological quality of the studies was fair for most of the psychometric characteristics analyzed. Many instruments have been developed to assess the quality of dying and death. The Quality of Dying and Death Questionnaire is the best available measure of the quality of dying and death. It is the only questionnaire identified in this review where all psychometric properties according to the COSMIN checklist have been evaluated. © 2018 John Wiley & Sons Ltd.

The use of citation indicators to identify and support high-quality research in Poland.

PubMed

Pilc, Andrzej

2008-01-01

In large, mostly English-speaking countries, where the "critical mass" of scientists working in different subfields of science is achieved, the peer review system may be sufficient to assess the quality of scientific research. However, in smaller countries, outside the Anglo-American circle, it is important to introduce different systems to identify research of high quality. In Poland, a parametric system for assessing the quality of research has been introduced. It was largely based on the impact factor of scientific journals. While the use of this indicator to assess research quality is highly questionable, the implementation of the system in the Polish reality is even worse. Therefore it is important to change and improve the system currently used by the Ministry of Science and Higher Education to both evaluate and, more importantly, finance science in Poland. Here, a system based on three factors, i.e. the impact factor, the institutional h-index, and the institutional number of citations, is proposed. The scientific quality of institutions in Division VI: Medical Sciences of the Polish Academy of Sciences were evaluated and the results were compared with the existing system. Moreover, a method to identify high-quality researchers and institutions at the national level based on the quantity of highly cited papers is shown. Additionally, an attempt to identify the highest quality Polish research on an international level is proposed. This is based on the number of individual citations, the individual h-index, the number of publications, and the priority of the discovery.

Data quality assurance: an analysis of patient non-response.

PubMed

Derby, Dustin C; Haan, Andrea; Wood, Kurt

2011-01-01

Patient satisfaction is paramount to maintaining high clinical quality assurance. This study seeks to compare response rates, response bias, and the completeness of data between paper and electronic collection modes of a chiropractic patient satisfaction survey. A convenience sample of 206 patients presenting to a chiropractic college clinic were surveyed concerning satisfaction with their chiropractic care. Paper (in-clinic and postal) and electronic modes of survey administration were compared for response rates and non-response bias. The online data collection mode resulted in fewer non-responses and a higher response rate, and did not evince response bias when compared to paper modes. The postal paper mode predicted non-response rates over the in-clinic paper and online modalities and exhibited a gender bias. This current study was a single clinic study; future studies should consider multi-clinic data collections. Busy clinic operations and available staff resources restricted the ability to conduct a random sampling of patients or to invite all eligible patients, therefore limiting the generalizability of collected survey data. Results of this study will provide data to aid development of survey protocols that efficiently, account for available human resources, and are convenient for patients while allowing for the most complete and accurate data collection possible in an educational clinic setting. Understanding patient responses across survey modes is critical for the cultivation of quality business intelligence within college teaching clinic settings. This study bridges measurement evidence from three popular data collection modalities and offers support for higher levels of quality for web-based data collection.

Recent Economic Perspectives on Political Economy, Part II*

PubMed Central

Dewan, Torun; Shepsle, Kenneth A.

2013-01-01

In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities. PMID:23606754

Recent Economic Perspectives on Political Economy, Part I*

PubMed Central

Dewan, Torun; Shepsle, Kenneth A.

2013-01-01

In recent years some of the best theoretical work on the political economy of political institutions and processes has begun surfacing outside the political science mainstream in high quality economics journals. This two-part paper surveys these contributions from a recent five-year period. In Part I, the focus is on elections, voting and information aggregation, followed by treatments of parties, candidates, and coalitions. In Part II, papers on economic performance and redistribution, constitutional design, and incentives, institutions, and the quality of political elites are discussed. Part II concludes with a discussion of the methodological bases common to economics and political science, the way economists have used political science research, and some new themes and arbitrage opportunities. PMID:23990686

[Study of genuineness based on changes of ancient herbal origin--taking Astragalus membranaceus and Salvia miltiorrhiza as examples].

PubMed

Zhan, Zhi-Lai; Deng, Ai-Ping; Peng, Hua-Sheng; Zhang, Xiao-Bo; Guo, Lan-Ping; Huang, Lu-Qi

2016-09-01

Basically, Dao-di hers are produced in specific area which has a long history, good quality, good medicine, curative effect. However genuine medicinal material area in history is not static, this makes the establishment of genuine medicinal material origin and the in-depth research be very difficult. This paper has profoundly analyzed the origin of different historical periods taking Astragalus membranaceus and Salvia miltiorrhiza as examples, and then summarized the reasons of herbal origin changes from the humanities, social and natural three aspects. This paper provides a basis for establishment and the further research of high-quality genuine producing area. Copyright© by the Chinese Pharmaceutical Association.

Evaluation of the low dose cardiac CT imaging using ASIR technique

NASA Astrophysics Data System (ADS)

Fan, Jiahua; Hsieh, Jiang; Deubig, Amy; Sainath, Paavana; Crandall, Peter

2010-04-01

Today Cardiac imaging is one of the key driving forces for the research and development activities of Computed Tomography (CT) imaging. It requires high spatial and temporal resolution and is often associated with high radiation dose. The newly introduced ASIR technique presents an efficient method that offers the dose reduction benefits while maintaining image quality and providing fast reconstruction speed. This paper discusses the study of image quality of the ASIR technique for Cardiac CT imaging. Phantoms as well as clinical data have been evaluated to demonstrate the effectiveness of ASIR technique for Cardiac CT applications.

SPEKTROP DPU: optoelectronic platform for fast multispectral imaging

NASA Astrophysics Data System (ADS)

Graczyk, Rafal; Sitek, Piotr; Stolarski, Marcin

2010-09-01

In recent years it easy to spot and increasing need of high-quality Earth imaging in airborne and space applications. This is due fact that government and local authorities urge for up to date topological data for administrative purposes. On the other hand, interest in environmental sciences, push for ecological approach, efficient agriculture and forests management are also heavily supported by Earth images in various resolutions and spectral ranges. "SPEKTROP DPU: Opto-electronic platform for fast multi-spectral imaging" paper describes architectural datails of data processing unit, part of universal and modular platform that provides high quality imaging functionality in aerospace applications.

A systematic review of the factors that influence the quality and effectiveness of telesupervision for health professionals.

PubMed

Martin, Priya; Lizarondo, Lucylynn; Kumar, Saravana

2018-05-01

Introduction Whilst telesupervision (clinical supervision undertaken using communication technology) is being used more frequently, there is limited information on what factors influence its effectiveness and quality. We undertook this systematic review to address this gap. Methods Eligible telesupervision studies were identified following targeted search of electronic databases and the grey literature. Data were synthesised thematically, resulting in development of core themes. Results We identified 286 papers for initial relevancy screening by title and abstract. The full text of 36 papers were then retrieved and assessed for further relevance. A total of 11 papers were included in the final analysis. We identified eight themes that contribute to effective and high-quality telesupervision: supervisee characteristics, supervisor characteristics, supervision characteristics, supervisory relationship, communication strategies, prior face-to-face contact, environmental factors and technological considerations. Conclusion From the available evidence, telesupervision can be a feasible and acceptable form of clinical supervision if set up well. Further studies with robust designs are required to strengthen the existing evidence on what makes telesupervision effective, as well as to examine its cost-effectiveness.

Health effects associated with exposure to ambient air pollution.

PubMed

Samet, Jonathan; Krewski, Daniel

2007-02-01

The World Health Organization has identified ambient air pollution as a high public health priority, based on estimates of air pollution related death and disability-adjusted life years derived in its Global Burden of Disease initiative. The NERAM Colloquium Series on Health and Air Quality was initiated to strengthen the linkage between scientists, policymakers, and other stakeholders by reviewing the current state of science, identifying policy-relevant gaps and uncertainties in the scientific evidence, and proposing a path forward for research and policy to improve air quality and public health. The objective of this paper is to review the current state of science addressing the impacts of air pollution on human health. The paper is one of four background papers prepared for the 2003 NERAM/AirNet Conference on Strategies for Clean Air and Health, the third meeting in the international Colloquium Series. The review is based on the framework and findings of the U.S. National Research Committee (NRC) on Research Priorities for Airborne Particulate Matter and addresses key questions underlying air quality risk management policy decisions.

High power parallel ultrashort pulse laser processing

NASA Astrophysics Data System (ADS)

Gillner, Arnold; Gretzki, Patrick; Büsing, Lasse

2016-03-01

The class of ultra-short-pulse (USP) laser sources are used, whenever high precession and high quality material processing is demanded. These laser sources deliver pulse duration in the range of ps to fs and are characterized with high peak intensities leading to a direct vaporization of the material with a minimum thermal damage. With the availability of industrial laser source with an average power of up to 1000W, the main challenge consist of the effective energy distribution and disposition. Using lasers with high repetition rates in the MHz region can cause thermal issues like overheating, melt production and low ablation quality. In this paper, we will discuss different approaches for multibeam processing for utilization of high pulse energies. The combination of diffractive optics and conventional galvometer scanner can be used for high throughput laser ablation, but are limited in the optical qualities. We will show which applications can benefit from this hybrid optic and which improvements in productivity are expected. In addition, the optical limitations of the system will be compiled, in order to evaluate the suitability of this approach for any given application.

[Try to improve journal quality by improving standards and editing process].

PubMed

Zheng, Jia-wei

2005-04-01

The quality of medical journals depends on several factors involving 3 groups of people with their independent but relevant roles: the authors, the reviewers and the editors. Peer review and editing is the key factor to improve the quality of medical publications and journals. Shanghai Journal of Stomatology (SJS) has been regarded as a leading journal for publishing high-quality work in the field of stomatology in China. In October 2003, it was accepted by the National Library of Medicine, USA, to be indexed and included in Index Medicus and MEDLINE. To further improve the journal's overall quality, the Editorial Agency led by Professor Zheng Jia-wei has made great efforts to formulate its essential requirements in paper style, bilingual abstract writing and statistical analysis for the manuscripts submitted for possible publication. Strict independent peer review system has been adopted to assess the quality of the manuscripts received since it was founded in 1992. The reviewer is required to address detailed aspects of the paper under review and to resend his or her opinion on the paper. The editorial management is a crucial part of the publishing process. The editors begin action with the receipt of the manuscript, direct the various steps of evaluation, correction and re-submission, until a decision is made to accept or reject the paper at the regular meeting of Decision Making Group on Manuscripts of SJS led by the Editor-in-Chief. Once a paper is accepted and carefully revised, the editors will make necessary text and layout editing. Due consideration is given to the statistical, bilingual and ethical aspects as well as to the overall uniformity of the terminology, nomenclatures and style throughout the volume as a whole in the promotion of standards. The journal has not been cited by Science Citation Index (SCI) till now, further steps should be taken to make this journal better known throughout the World, to improve the quality of the publications and reduce the delay between the initial receipt and the final publication of manuscripts.

75 FR 59209 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses from...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

.... Lorentzen, Deputy Assistant Secretary for Import Administration, from Susan Kuhbach, Director, Office 1.... Provision of Standing Timber for Less Than Adequate Remuneration 2. Government Prohibition of Log Exports 3...

75 FR 75663 - Certain Coated Paper Suitable for High-Quality Print Graphics Using Sheet-Fed Presses From the...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

...., Washington, DC 20230. SUPPLEMENTARY INFORMATION: On November 17, 2010, the Department published an amended... (China or other clay), calcium carbonate, titanium dioxide, and/or other inorganic substances; with or...

VERIFYING THE VOC CONTROL PERFORMANCE OF BIOREACTORS

EPA Science Inventory

The paper describes the verification testing approach used to collect high-quality, peer-reviewed data on the performance of bioreaction-based technologies for the control of volatile organic compounds (VOCs). The verification protocol that describes the approach for these tests ...

Taguchi Approach to Design Optimization for Quality and Cost: An Overview

NASA Technical Reports Server (NTRS)

Unal, Resit; Dean, Edwin B.

1990-01-01

Calibrations to existing cost of doing business in space indicate that to establish human presence on the Moon and Mars with the Space Exploration Initiative (SEI) will require resources, felt by many, to be more than the national budget can afford. In order for SEI to succeed, we must actually design and build space systems at lower cost this time, even with tremendous increases in quality and performance requirements, such as extremely high reliability. This implies that both government and industry must change the way they do business. Therefore, new philosophy and technology must be employed to design and produce reliable, high quality space systems at low cost. In recognizing the need to reduce cost and improve quality and productivity, Department of Defense (DoD) and National Aeronautics and Space Administration (NASA) have initiated Total Quality Management (TQM). TQM is a revolutionary management strategy in quality assurance and cost reduction. TQM requires complete management commitment, employee involvement, and use of statistical tools. The quality engineering methods of Dr. Taguchi, employing design of experiments (DOE), is one of the most important statistical tools of TQM for designing high quality systems at reduced cost. Taguchi methods provide an efficient and systematic way to optimize designs for performance, quality, and cost. Taguchi methods have been used successfully in Japan and the United States in designing reliable, high quality products at low cost in such areas as automobiles and consumer electronics. However, these methods are just beginning to see application in the aerospace industry. The purpose of this paper is to present an overview of the Taguchi methods for improving quality and reducing cost, describe the current state of applications and its role in identifying cost sensitive design parameters.

Photochemical modeling of emissions trading of highly reactive volatile organic compounds in Houston, Texas. 2. Incorporation of chlorine emissions.

PubMed

Wang, Linlin; Thompson, Tammy; McDonald-Buller, Elena C; Allen, David T

2007-04-01

As part of the State Implementation Plan for attaining the National Ambient Air Quality Standard for ozone, the Texas Commission of Environmental Quality has created a Highly Reactive Volatile Organic Compounds (HRVOC) Emissions Cap and Trade Program for industrial point sources in the Houston/Galveston/Brazoria area. This series of papers examines the potential air quality impacts of this new emission trading program through photochemical modeling of potential trading scenarios; this paper examines the air quality impact of allowing facilities to trade chlorine emission reductions for HRVOC allocations on a reactivity weighted basis. The simulations indicate that trading of anthropogenic chlorine emission reductions for HRVOC allowances at a single facility or between facilities, in general, resulted in improvements in air quality. Decreases in peak 1-h averaged and 8-h averaged ozone concentrations associated with trading chlorine emissions for HRVOC allocations on a Maximum Incremental Reactivity (MIR) basis were up to 0.74 ppb (0.63%) and 0.56 ppb (0.61%), respectively. Air quality metrics based on population exposure decreased by up to 3.3% and 4.1% for 1-h and 8-h averaged concentrations. These changes are small compared to the maximum changes in ozone concentrations due to the VOC emissions from these sources (5-10 ppb for 8-h averages; up to 30 ppb for 1-h averages) and the chlorine emissions from the sources (5-10 ppb for maximum concentrations over wide areas and up to 70 ppb in localized areas). The simulations indicate that the inclusion of chlorine emissions in the trading program is likely to be beneficial to air quality and is unlikely to cause localized increases in ozone concentrations ("hot spots").

[How to write an andrological paper: standardization, mechanics and techniques].

PubMed

Huang, Yu-Feng; Lu, Jin-Chun

2010-12-01

Andrological research papers not only reflect the current status and academic level of andrology, but also constitute an important communication platform for researchers and clinicians engaged in this field and contribute significantly to the development of andrology. It would be made easier to write a high-quality andrological paper once the author observes the basic requirements of research papers, adheres to the use of standard scientific terminology, knows the special writing mechanics, and equips himself with some essential writing techniques. Based on the long experience of editorship, we present a detailed introduction of the standardization, mechanics and techniques of writing an andrological paper.

Participating despite questions: toward a more confident participatory technology assessment : commentary on: "Questioning 'participation': a critical appraisal of its conceptualization in a Flemish participatory technology assessment".

PubMed

Guston, David H

2011-12-01

While the important challenges of public deliberations on emerging technologies are crucial to keep in mind, this paper argues that scholars and practitioners have reason to be more confident in their performance of participatory technology assessments (pTA). Drawing on evidence from the 2008 National Citizens' Technology Forum (NCTF) conducted by the Center for Nanotechnology in Society at Arizona State University, this paper describes how pTA offers a combination of intensive and extensive qualities that are unique among modes of engagement. In the NCTF, this combination led to significant learning and opinion changes, based on what can be characterized as a high-quality deliberation. The quality of the anticipatory knowledge required to address emerging technologies is always contested, but pTAs can be designed with outcomes in mind-especially when learning is understood as an outcome.

Telephone-quality pathological speech classification using empirical mode decomposition.

PubMed

Kaleem, M F; Ghoraani, B; Guergachi, A; Krishnan, S

2011-01-01

This paper presents a computationally simple and effective methodology based on empirical mode decomposition (EMD) for classification of telephone quality normal and pathological speech signals. EMD is used to decompose continuous normal and pathological speech signals into intrinsic mode functions, which are analyzed to extract physically meaningful and unique temporal and spectral features. Using continuous speech samples from a database of 51 normal and 161 pathological speakers, which has been modified to simulate telephone quality speech under different levels of noise, a linear classifier is used with the feature vector thus obtained to obtain a high classification accuracy, thereby demonstrating the effectiveness of the methodology. The classification accuracy reported in this paper (89.7% for signal-to-noise ratio 30 dB) is a significant improvement over previously reported results for the same task, and demonstrates the utility of our methodology for cost-effective remote voice pathology assessment over telephone channels.

Depth image enhancement using perceptual texture priors

NASA Astrophysics Data System (ADS)

Bang, Duhyeon; Shim, Hyunjung

2015-03-01

A depth camera is widely used in various applications because it provides a depth image of the scene in real time. However, due to the limited power consumption, the depth camera presents severe noises, incapable of providing the high quality 3D data. Although the smoothness prior is often employed to subside the depth noise, it discards the geometric details so to degrade the distance resolution and hinder achieving the realism in 3D contents. In this paper, we propose a perceptual-based depth image enhancement technique that automatically recovers the depth details of various textures, using a statistical framework inspired by human mechanism of perceiving surface details by texture priors. We construct the database composed of the high quality normals. Based on the recent studies in human visual perception (HVP), we select the pattern density as a primary feature to classify textures. Upon the classification results, we match and substitute the noisy input normals with high quality normals in the database. As a result, our method provides the high quality depth image preserving the surface details. We expect that our work is effective to enhance the details of depth image from 3D sensors and to provide a high-fidelity virtual reality experience.

Brain Atlas Fusion from High-Thickness Diagnostic Magnetic Resonance Images by Learning-Based Super-Resolution

PubMed Central

Zhang, Jinpeng; Zhang, Lichi; Xiang, Lei; Shao, Yeqin; Wu, Guorong; Zhou, Xiaodong; Shen, Dinggang; Wang, Qian

2017-01-01

It is fundamentally important to fuse the brain atlas from magnetic resonance (MR) images for many imaging-based studies. Most existing works focus on fusing the atlases from high-quality MR images. However, for low-quality diagnostic images (i.e., with high inter-slice thickness), the problem of atlas fusion has not been addressed yet. In this paper, we intend to fuse the brain atlas from the high-thickness diagnostic MR images that are prevalent for clinical routines. The main idea of our works is to extend the conventional groupwise registration by incorporating a novel super-resolution strategy. The contribution of the proposed super-resolution framework is two-fold. First, each high-thickness subject image is reconstructed to be isotropic by the patch-based sparsity learning. Then, the reconstructed isotropic image is enhanced for better quality through the random-forest-based regression model. In this way, the images obtained by the super-resolution strategy can be fused together by applying the groupwise registration method to construct the required atlas. Our experiments have shown that the proposed framework can effectively solve the problem of atlas fusion from the low-quality brain MR images. PMID:29062159

Brain Atlas Fusion from High-Thickness Diagnostic Magnetic Resonance Images by Learning-Based Super-Resolution.

PubMed

Zhang, Jinpeng; Zhang, Lichi; Xiang, Lei; Shao, Yeqin; Wu, Guorong; Zhou, Xiaodong; Shen, Dinggang; Wang, Qian

2017-03-01

It is fundamentally important to fuse the brain atlas from magnetic resonance (MR) images for many imaging-based studies. Most existing works focus on fusing the atlases from high-quality MR images. However, for low-quality diagnostic images (i.e., with high inter-slice thickness), the problem of atlas fusion has not been addressed yet. In this paper, we intend to fuse the brain atlas from the high-thickness diagnostic MR images that are prevalent for clinical routines. The main idea of our works is to extend the conventional groupwise registration by incorporating a novel super-resolution strategy. The contribution of the proposed super-resolution framework is two-fold. First, each high-thickness subject image is reconstructed to be isotropic by the patch-based sparsity learning. Then, the reconstructed isotropic image is enhanced for better quality through the random-forest-based regression model. In this way, the images obtained by the super-resolution strategy can be fused together by applying the groupwise registration method to construct the required atlas. Our experiments have shown that the proposed framework can effectively solve the problem of atlas fusion from the low-quality brain MR images.

Comparison of computation time and image quality between full-parallax 4G-pixels CGHs calculated by the point cloud and polygon-based method

NASA Astrophysics Data System (ADS)

Nakatsuji, Noriaki; Matsushima, Kyoji

2017-03-01

Full-parallax high-definition CGHs composed of more than billion pixels were so far created only by the polygon-based method because of its high performance. However, GPUs recently allow us to generate CGHs much faster by the point cloud. In this paper, we measure computation time of object fields for full-parallax high-definition CGHs, which are composed of 4 billion pixels and reconstruct the same scene, by using the point cloud with GPU and the polygon-based method with CPU. In addition, we compare the optical and simulated reconstructions between CGHs created by these techniques to verify the image quality.

High Dynamic Imaging for Photometry and Graphic Arts Evaluation

NASA Astrophysics Data System (ADS)

T. S., Sudheer Kumar; Kurian, Ciji Pearl; Shama, Kumara; K. R., Shailesh

2018-05-01

High Dynamic Range Imaging (HDRI) techniques for luminance measurement is gaining importance in recent years. This paper presents the application of the HDRI system for obtaining the photometric characteristics of lighting fixtures as well to assess the quality of lighting in colour viewing booth of a printing press. The process of quality control of prints in a printing press is known as graphic arts evaluation. This light booth plays a major role in the quality control of prints. In this work, Nikon D5100 camera was used to obtain the photometric characteristics of narrow beam spotlight. The results of this experiment are in agreement with photometric characteristics obtained from a standard industry grade Gonio-photometer. Similarly, Canon 60D camera was used to assess the quality of spatial luminance distribution of light in the colour viewing booth. This work demonstrates the usefulness of HDRI technology for photometric measurements and luminance distributions of illuminated interiors.

Indoor air quality of everyday use spaces dedicated to specific purposes-a review.

PubMed

Marć, Mariusz; Śmiełowska, Monika; Namieśnik, Jacek; Zabiegała, Bożena

2018-01-01

According to literature data, some of the main factors which significantly affect the quality of the indoor environment in residential households or apartments are human activities such as cooking, smoking, cleaning, and indoor exercising. The paper presents a literature overview related to air quality in everyday use spaces dedicated to specific purposes which are integral parts of residential buildings, such as kitchens, basements, and individual garages. Some aspects of air quality in large-scale car parks, as a specific type of indoor environment, are also discussed. All those areas are characterized by relatively short time use. On the other hand, high and very high concentration levels of xenobiotics can be observed, resulting in higher exposure risk. The main compounds or group of chemical compounds are presented and discussed. The main factors influencing the type and amount of chemical pollutants present in the air of such areas are indicated.

Thin-slice vision: inference of confidence measure from perceptual video quality

NASA Astrophysics Data System (ADS)

Hameed, Abdul; Balas, Benjamin; Dai, Rui

2016-11-01

There has been considerable research on thin-slice judgments, but no study has demonstrated the predictive validity of confidence measures when assessors watch videos acquired from communication systems, in which the perceptual quality of videos could be degraded by limited bandwidth and unreliable network conditions. This paper studies the relationship between high-level thin-slice judgments of human behavior and factors that contribute to perceptual video quality. Based on a large number of subjective test results, it has been found that the confidence of a single individual present in all the videos, called speaker's confidence (SC), could be predicted by a list of features that contribute to perceptual video quality. Two prediction models, one based on artificial neural network and the other based on a decision tree, were built to predict SC. Experimental results have shown that both prediction models can result in high correlation measures.

Quality of nursing care perceived by patients and their nurses: an application of the critical incident technique. Part 1.

PubMed

Redfern, S; Norman, I

1999-07-01

The aims of the study were to identify indicators of quality of nursing care from the perceptions of patients and nurses, and to determine the congruence between patients' and nurses' perceptions. The paper is presented in two parts. Part 1 includes the background and methods to the study and the findings from the comparison of patients' and nurses' perceptions. Part 2 describes the perceptions of patients and nurses, and the conclusions drawn from the study as a whole. Patients and nurses in hospital wards were interviewed using the critical incident technique. We grouped 4546 indicators of high and low quality nursing care generated from the interview transcripts into 316 subcategories, 68 categories and 31 themes. Congruence between patients' and nurses' perceptions of quality was high and significant, although there was some difference of emphasis.

How Are Questions That Students Ask in High Level Mathematics Classes Linked to General Giftedness?

ERIC Educational Resources Information Center

Leikin, Roza; Koichu, Boris; Berman, Avi; Dinur, Sariga

2017-01-01

This paper presents a part of a larger study, in which we asked "How are learning and teaching of mathematics at high level linked to students' general giftedness?" We consider asking questions, especially student-generated questions, as indicators of quality of instructional interactions. In the part of the study presented in this…

Higher Education in Australia: A Review of Reviews from Dawkins to Today

ERIC Educational Resources Information Center

Australian Government Department of Education and Training, 2015

2015-01-01

The challenge of funding a high quality higher education system, ensuring it has the capacity to help meet the increasing demand for high level skills in our economy and the aspirations of our students, has been an ongoing concern for successive Australian governments over many years. This paper reviews the findings and recommendations of…

Assessing Teaching Practicum Reflections: Distinguishing Discourse Features of the "High" and "Low" Grade Reports

ERIC Educational Resources Information Center

Luk, Jasmine

2008-01-01

Using reflective journals to promote learning has been a common practice in the teaching profession. How learners present reflections in what are judged to be high-quality reflective writing remains under-researched. This paper explores the discourse features of teaching practicum reflective reports written by six pre-service student teachers of…

An Anti-Bias Children's Literature-Based Reading Program.

ERIC Educational Resources Information Center

Ruiz, Luz I.

This paper presents a Reading/Language curriculum for grades K-4 (but adaptable to middle and high school students) which is anti-bias and literature-based. It is intended to help educators use high-quality multicultural children's literature as a medium for reading instruction, and to show all students why discrimination is harmful, and how bias…

The Prevalence and Quality of Source Attribution in Middle and High School Science Papers

ERIC Educational Resources Information Center

Vieyra, Michelle; Weaver, Kari

2016-01-01

Plagiarism is a commonly cited problem in higher education, especially in scientific writing and assignments for science courses. Students may not intentionally plagiarize, but may instead be confused about what proper source attribution entails. Much of this confusion likely stems from high school, either from lack of or inconsistent instruction…

Silvicultural technology and applications for forest plantation establishment west of the Cascade crest.

Treesearch

Timothy B. Harrington; Jeff Madsen

2005-01-01

Research and operational trials have identified methods of forest plantation establishment that promote high rates of survival and early growth of tree seedlings in the Pacific Northwest. Primary reasons for this success are the intensive control of competing vegetation provided by herbicide treatments and the planting of high quality seedlings. This paper discusses...

Supporting Early Math--Rationales and Requirements for High Quality Software

ERIC Educational Resources Information Center

Haake, Magnus; Husain, Layla; Gulz, Agneta

2015-01-01

There is substantial evidence that preschooler's performance in early math is highly correlated to math performance throughout school as well as academic skills in general. One way to help children attain early math skills is by using targeted educational software and the paper discusses potential gains of using such software to support early math…

Implementation of dictionary pair learning algorithm for image quality improvement

NASA Astrophysics Data System (ADS)

Vimala, C.; Aruna Priya, P.

2018-04-01

This paper proposes an image denoising on dictionary pair learning algorithm. Visual information is transmitted in the form of digital images is becoming a major method of communication in the modern age, but the image obtained after transmissions is often corrupted with noise. The received image needs processing before it can be used in applications. Image denoising involves the manipulation of the image data to produce a visually high quality image.

A comparative analysis of quality management standards for contract research organisations in clinical trials.

PubMed

Murray, Elizabeth; McAdam, Rodney

2007-01-01

This article compares and contrasts the main quality standards in the highly regulated pharmaceutical industry with specific focus on Good Clinical Practice (GCP), the standard for designing, conducting, recording and reporting clinical trials involving human participants. Comparison is made to ISO quality standards, which can be applied to all industries and types of organisation. The study is then narrowed to that of contract research organisations (CROs) involved in the conduct of clinical trials. The paper concludes that the ISO 9000 series of quality standards can act as a company-wide framework for quality management within such organisations by helping to direct quality efforts on a long-term basis without any loss of compliance. This study is valuable because comparative analysis in this domain is uncommon.

Quality improving techniques for free-viewpoint DIBR

NASA Astrophysics Data System (ADS)

Do, Luat; Zinger, Sveta; de With, Peter H. N.

2010-02-01

Interactive free-viewpoint selection applied to a 3D multi-view signal is a possible attractive feature of the rapidly developing 3D TV media. This paper explores a new rendering algorithm that computes a free-viewpoint based on depth image warping between two reference views from existing cameras. We have developed three quality enhancing techniques that specifically aim at solving the major artifacts. First, resampling artifacts are filled in by a combination of median filtering and inverse warping. Second, contour artifacts are processed while omitting warping of edges at high discontinuities. Third, we employ a depth signal for more accurate disocclusion inpainting. We obtain an average PSNR gain of 3 dB and 4.5 dB for the 'Breakdancers' and 'Ballet' sequences, respectively, compared to recently published results. While experimenting with synthetic data, we observe that the rendering quality is highly dependent on the complexity of the scene. Moreover, experiments are performed using compressed video from surrounding cameras. The overall system quality is dominated by the rendering quality and not by coding.

Can health insurance improve access to quality care for the Indian poor?

PubMed

Michielsen, Joris; Criel, Bart; Devadasan, Narayanan; Soors, Werner; Wouters, Edwin; Meulemans, Herman

2011-08-01

Recently, the Indian government launched health insurance schemes for the poor both to protect them from high health spending and to improve access to high-quality health services. This article aims to review the potentials of health insurance interventions in order to improve access to quality care in India based on experiences of community health insurance schemes. PubMed, Ovid MEDLINE (R), All EBM Reviews, CSA Sociological Abstracts, CSA Social Service Abstracts, EconLit, Science Direct, the ISI Web of Knowledge, Social Science Research Network and databases of research centers were searched up to September 2010. An Internet search was executed. One thousand hundred and thirty-three papers were assessed for inclusion and exclusion criteria. Twenty-five papers were selected providing information on eight schemes. A realist review was performed using Hirschman's exit-voice theory: mechanisms to improve exit strategies (financial assets and infrastructure) and strengthen patient's long voice route (quality management) and short voice route (patient pressure). All schemes use a mix of measures to improve exit strategies and the long voice route. Most mechanisms are not effective in reality. Schemes that focus on the patients' bargaining position at the patient-provider interface seem to improve access to quality care. Top-down health insurance interventions with focus on exit strategies will not work out fully in the Indian context. Government must actively facilitate the potential of CHI schemes to emancipate the target group so that they may transform from mere passive beneficiaries into active participants in their health.

Effects of process parameters on the molding quality of the micro-needle array

NASA Astrophysics Data System (ADS)

Qiu, Z. J.; Ma, Z.; Gao, S.

2016-07-01

Micro-needle array, which is used in medical applications, is a kind of typical injection molded products with microstructures. Due to its tiny micro-features size and high aspect ratios, it is more likely to produce short shots defects, leading to poor molding quality. The injection molding process of the micro-needle array was studied in this paper to find the effects of the process parameters on the molding quality of the micro-needle array and to provide theoretical guidance for practical production of high-quality products. With the shrinkage ratio and warpage of micro needles as the evaluation indices of the molding quality, the orthogonal experiment was conducted and the analysis of variance was carried out. According to the results, the contribution rates were calculated to determine the influence of various process parameters on molding quality. The single parameter method was used to analyse the main process parameter. It was found that the contribution rate of the holding pressure on shrinkage ratio and warpage reached 83.55% and 94.71% respectively, far higher than that of the other parameters. The study revealed that the holding pressure is the main factor which affects the molding quality of micro-needle array so that it should be focused on in order to obtain plastic parts with high quality in the practical production.

Effect of changes to the school food environment on eating behaviours and/or body weight in children: a systematic review.

PubMed

Driessen, C E; Cameron, A J; Thornton, L E; Lai, S K; Barnett, L M

2014-12-01

Previous school obesity-prevention reviews have included multi-component interventions. Here, we aimed to review the evidence for the effect of isolated food environment interventions on both eating behaviours (including food purchasing) and/or body weight. Five electronic databases were searched (last updated 30 November 2013). Of the 1,002 unique papers identified, 55 reported on school food environment changes, based on a review of titles and abstracts. Thirty-seven further papers were excluded, for not meeting the inclusion criteria. The final selection consisted of 18 papers (14 United States, 4 United Kingdom). Two studies had a body mass index (BMI) outcome, 14 assessed purchasing or eating behaviours and two studies assessed both weight and behaviour. Seventeen of 18 papers reported a positive outcome on either BMI (or change in BMI) or the healthfulness of food sold or consumed. Two studies were rated as strong quality and 11 as weak. Only three studies included a control group. A school environment supportive of healthy eating is essential to combat heavy marketing of unhealthy food. Modification of the school food environment (including high-level policy changes at state or national level) can have a positive impact on eating behaviours. A need exists, however, for further high-quality studies. © 2014 World Obesity.

Modal analysis of the ultrahigh finesse Haroche QED cavity

NASA Astrophysics Data System (ADS)

Marsic, Nicolas; De Gersem, Herbert; Demésy, Guillaume; Nicolet, André; Geuzaine, Christophe

2018-04-01

In this paper, we study a high-order finite element approach to simulate an ultrahigh finesse Fabry–Pérot superconducting open resonator for cavity quantum electrodynamics. Because of its high quality factor, finding a numerically converged value of the damping time requires an extremely high spatial resolution. Therefore, the use of high-order simulation techniques appears appropriate. This paper considers idealized mirrors (no surface roughness and perfect geometry, just to cite a few hypotheses), and shows that under these assumptions, a damping time much higher than what is available in experimental measurements could be achieved. In addition, this work shows that both high-order discretizations of the governing equations and high-order representations of the curved geometry are mandatory for the computation of the damping time of such cavities.

Common Effects Methodology National Stakeholder Meeting December 1, 2010 White Papers

EPA Pesticide Factsheets

EPA is exploring how to build on the substantial high quality science developed under both OPP programs to develop additional tools and approaches to support a consistent and common set of effects characterization methods using best available information.

Leadership and emotional intelligence in nursing and midwifery education and practice: a discussion paper.

PubMed

Carragher, Jean; Gormley, Kevin

2017-01-01

A discussion of the concepts of leadership and emotional intelligence in nursing and midwifery education and practice. The need for emotionally intelligent leadership in the health professions is acknowledged internationally throughout the nursing and midwifery literature. The concepts of emotional intelligence and emotional-social intelligence have emerged as important factors for effective leadership in the healthcare professions and require further exploration and discussion. This paper will explore these concepts and discuss their importance in the healthcare setting with reference to current practices in the UK, Ireland and internationally. Discussion paper. A search of published evidence from 1990-2015 using key words (as outlined below) was undertaken from which relevant sources were selected to build an informed discussion. Fostering emotionally intelligent leadership in nursing and midwifery supports the provision of high quality and compassionate care. Globally, leadership has important implications for all stakeholders in the healthcare professions with responsibility for maintaining high standards of care. This includes all grades of nurses and midwives, students entering the professions, managerial staff, academics and policy makers. This paper discusses the conceptual models of leadership and emotional intelligence and demonstrates an important link between the two. Further robust studies are required for ongoing evaluation of the different models of emotional intelligence and their link with effective leadership behaviour in the healthcare field internationally. This is of particular significance for professional undergraduate education to promote ongoing compassionate, safe and high quality standards of care. © 2016 John Wiley & Sons Ltd.

The Concepts of Quality, Quality Assurance and Quality Enhancement

ERIC Educational Resources Information Center

Elassy, Noha

2015-01-01

Purpose: This paper aims to critically review and discuss different definitions of the concepts of quality, quality assurance (QA) and quality enhancement (QE) in higher education (HE) with presenting critical perspectives of the literature. Design/methodology/approach: The paper looks at literature concerns with the meaning of quality, QA and QE,…

Reforming funding for chronic illness: Medicare-CDM.

PubMed

Swerissen, Hal; Taylor, Michael J

2008-02-01

Chronic diseases are a major challenge for the Australian health care system in terms of both the provision of quality care and expenditure, and these challenges will only increase in the future. Various programs have been instituted under the Medicare system to provide increased funding for chronic care, but essentially these programs still follow the traditional fee-for-service model. This paper proposes a realignment and extension of current Medicare chronic disease management programs into a framework that provides general practitioners and other health professionals with the necessary "tools" for high quality care planning and ongoing management, and incorporating international models of outcome-linked funding. The integration of social support services with the Medicare system is also a necessary step in providing high quality care for patients with complex needs requiring additional support.

Strategies for Promoting High-Quality Care and Personal Resilience in Palliative Care.

PubMed

Heinze, Katherine E; Holtz, Heidi K; Rushton, Cynda H

2017-06-01

Palliative care (PC) clinicians are faced with ever-expanding pressures, which can make it difficult to fulfill their duties to self and others and lead to moral distress. Understanding the pressures that PC clinicians face and the resources that could be employed to ease their moral distress is crucial to maintaining a healthy PC workforce and to providing necessary PC services to patients. In this paper, we discuss recommendations related to two promising pathways for supporting PC clinicians in providing high-quality PC: (1) improving systemic PC delivery and (2) strategies to promote ethical practice environments and individual resilience. Enacting these recommendations holds promise for sustaining higher-quality and accessible PC and a more engaged PC workforce. © 2017 American Medical Association. All Rights Reserved.

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels.

PubMed

Zhang, Chenchu; Hu, Yanlei; Du, Wenqiang; Wu, Peichao; Rao, Shenglong; Cai, Ze; Lao, Zhaoxin; Xu, Bing; Ni, Jincheng; Li, Jiawen; Zhao, Gang; Wu, Dong; Chu, Jiaru; Sugioka, Koji

2016-09-13

Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices.

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels

NASA Astrophysics Data System (ADS)

Zhang, Chenchu; Hu, Yanlei; Du, Wenqiang; Wu, Peichao; Rao, Shenglong; Cai, Ze; Lao, Zhaoxin; Xu, Bing; Ni, Jincheng; Li, Jiawen; Zhao, Gang; Wu, Dong; Chu, Jiaru; Sugioka, Koji

2016-09-01

Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices.

Chirped-pulse coherent-OTDR with predistortion

NASA Astrophysics Data System (ADS)

Xiong, Ji; Jiang, Jialin; Wu, Yue; Chen, Yongxiang; Xie, Lianlian; Fu, Yun; Wang, Zinan

2018-03-01

In this paper, a novel method for generating high-quality chirped pulses with IQ modulator is studied theoretically and experimentally, which is a crucial building block for high-performance coherent optical time-domain reflectometry (COTDR). In order to compensate the nonlinearity of the modulator transfer function, we present a predistortion technique for chirped-pulse coherent optical time-domain reflectometry (CP-COTDR), the arcsin predistortion method and the single sideband with a suppressed carrier analog modulation used to generate the high quality chirped optical pulse. The high order sidebands, due to the large amplitude of the modulation signal and the nonlinear transfer function of the IQ modulator, can be relieved by the predistortion process, which means the power and the quality of the generated chirped pulse has been improved. In the experiment, this method increases the peak power of the chirped pulse by 4.2 dB compared to the case without predistortion process, as for the CP-COTDR system, this method increases the signal-to-noise ratio of the demodulated phase variation by 6.3 dB.

Customer focus in breast cancer screening services.

PubMed

Buttimer, Andreas

2009-01-01

The purpose of the paper is to demonstrate how a generic value chain and customer focused system as demonstrated by the Scottish and Irish breast screening programmes can be used to provide a high quality health service. Literature relevant to aligning the entire operating model--the companies' culture, business processes, management systems to serve one value discipline, i.e. customer intimacy, is reviewed and considered in the context of the NHS Scottish Breast Screening Programme in Edinburgh and BreastCheck--the National Breast Screening Programme in Ireland. This paper demonstrates how an emphasis on customer focus and operational excellence, as used in other service industries, can help to provide a better health service. It uses the Scottish and Irish breast screening programmes as illustrative examples. The paper applies the key requirements in the delivery of a quality service including an understanding of the characteristics of a service industry, the management of discontinuities involved in its delivery and the environment in which it operates. System failure is commonly the cause of quality failure in the health system. Breast screening programmes are designed to prevent such a failure. This paper promotes and describes the use of the generic value chain by using the knowledge gained in delivering a mammography-screening programme.

International VLBI Service for Geodesy and Astrometry. Delivering high-quality products and embarking on observations of the next generation

NASA Astrophysics Data System (ADS)

Nothnagel, A.; Artz, T.; Behrend, D.; Malkin, Z.

2017-07-01

The International VLBI Service for Geodesy and Astrometry (IVS) regularly produces high-quality Earth orientation parameters from observing sessions employing extensive networks or individual baselines. The master schedule is designed according to the telescope days committed by the stations and by the need for dense sampling of the Earth orientation parameters (EOP). In the pre-2011 era, the network constellations with their number of telescopes participating were limited by the playback and baseline capabilities of the hardware (Mark4) correlators. This limitation was overcome by the advent of software correlators, which can now accommodate many more playback units in a flexible configuration. In this paper, we describe the current operations of the IVS with special emphasis on the quality of the polar motion results since these are the only EOP components which can be validated against independent benchmarks. The polar motion results provided by the IVS have improved continuously over the years, now providing an agreement with IGS results at the level of 20-25 μas in a WRMS sense. At the end of the paper, an outlook is given for the realization of the VLBI Global Observing System.

Miniaturized Monitors for Assessment of Exposure to Air Pollutants: A Review.

PubMed

Borghi, Francesca; Spinazzè, Andrea; Rovelli, Sabrina; Campagnolo, Davide; Del Buono, Luca; Cattaneo, Andrea; Cavallo, Domenico M

2017-08-12

Air quality has a huge impact on different aspects of life quality, and for this reason, air quality monitoring is required by national and international regulations. Technical and procedural limitations of traditional fixed-site stations for monitoring or sampling of air pollutants are also well-known. Recently, a different type of miniaturized monitors has been developed. These monitors, due to their characteristics (e.g., low cost, small size, high portability) are becoming increasingly important for individual exposure assessment, especially since this kind of instrument can provide measurements at high spatial and temporal resolution, which is a notable advantage when approaching assessment of exposure to environmental contaminants. The aim of this study is indeed to provide information regarding current knowledge regarding the use of miniaturized air pollutant sensors. A systematic review was performed to identify original articles: a literature search was carried out using an appropriate query for the search of papers across three different databases, and the papers were selected using inclusion/exclusion criteria. The reviewed articles showed that miniaturized sensors are particularly versatile and could be applied in studies with different experimental designs, helping to provide a significant enhancement to exposure assessment, even though studies regarding their performance are still sparse.

Microbial Safety Improvement of Sea Buckthorn by Electron Beam Irradiation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nemtanu, Monica R.; Minea, R.; Mazilu, Elena

2007-04-23

The commercialization of medicinal plants and/or their products is highly increased in Romania lately. One of the most used herbs is sea buckthorn being well known for its quality with a large potential for curing some diseases. Sea buckthorn can be contaminated with undesirable microorganisms which may affect negatively its quality. The paper presents the results regarding the action of a non-conventional technology meaning electron beam technique on sea buckthorn in order to improve its microbiological quality. Our study revealed that the sea buckthorn microbial load has been improved after 3 kGy irradiation keeping its active principles.

Microbial Safety Improvement of Sea Buckthorn by Electron Beam Irradiation

NASA Astrophysics Data System (ADS)

Nemţanu, Monica R.; Minea, R.; Mazilu, Elena; Rǎdulescu, Nora

2007-04-01

The commercialization of medicinal plants and/or their products is highly increased in Romania lately. One of the most used herbs is sea buckthorn being well known for its quality with a large potential for curing some diseases. Sea buckthorn can be contaminated with undesirable microorganisms which may affect negatively its quality. The paper presents the results regarding the action of a non-conventional technology meaning electron beam technique on sea buckthorn in order to improve its microbiological quality. Our study revealed that the sea buckthorn microbial load has been improved after 3 kGy irradiation keeping its active principles.

Culture and behaviour in the English National Health Service: overview of lessons from a large multimethod study

PubMed Central

Dixon-Woods, Mary; Baker, Richard; Charles, Kathryn; Dawson, Jeremy; Jerzembek, Gabi; Martin, Graham; McCarthy, Imelda; McKee, Lorna; Minion, Joel; Ozieranski, Piotr; Willars, Janet; Wilkie, Patricia; West, Michael

2014-01-01

Background Problems of quality and safety persist in health systems worldwide. We conducted a large research programme to examine culture and behaviour in the English National Health Service (NHS). Methods Mixed-methods study involving collection and triangulation of data from multiple sources, including interviews, surveys, ethnographic case studies, board minutes and publicly available datasets. We narratively synthesised data across the studies to produce a holistic picture and in this paper present a high-level summary. Results We found an almost universal desire to provide the best quality of care. We identified many ‘bright spots’ of excellent caring and practice and high-quality innovation across the NHS, but also considerable inconsistency. Consistent achievement of high-quality care was challenged by unclear goals, overlapping priorities that distracted attention, and compliance-oriented bureaucratised management. The institutional and regulatory environment was populated by multiple external bodies serving different but overlapping functions. Some organisations found it difficult to obtain valid insights into the quality of the care they provided. Poor organisational and information systems sometimes left staff struggling to deliver care effectively and disempowered them from initiating improvement. Good staff support and management were also highly variable, though they were fundamental to culture and were directly related to patient experience, safety and quality of care. Conclusions Our results highlight the importance of clear, challenging goals for high-quality care. Organisations need to put the patient at the centre of all they do, get smart intelligence, focus on improving organisational systems, and nurture caring cultures by ensuring that staff feel valued, respected, engaged and supported. PMID:24019507

Attractive "quiet" courtyards: a potential modifier of urban residents' responses to road traffic noise?

PubMed

Gidlöf-Gunnarsson, Anita; Ohrström, Evy

2010-09-01

The present paper explores the influence of the physical environmental qualities of "quiet". courtyards (degree of naturalness and utilization) on residents' noise responses. A questionnaire study was conducted in urban residential areas with road-traffic noise exposure between L(Aeq,24h) 58 to 68 dB at the most exposed façade. The dwellings had "quiet" indoor section/s and faced a "quiet" outdoor courtyard (L(Aeq,24h) < 48 dB façade reflex included). Data were collected from 385 residents and four groups were formed based on sound-level categories (58-62 and 63-68 dB) and classification of the "quiet" courtyards into groups with low and high physical environmental quality. At both sound-level categories, the results indicate that access to high-quality "quiet" courtyards is associated with less noise annoyance and noise-disturbed outdoor activities among the residents. Compared to low-quality "quiet" courtyards, high-quality courtyards can function as an attractive restorative environment providing residents with a positive soundscape, opportunities for rest, relaxation and play as well as social relations that potentially reduce the adverse effects of noise. However, access to quietness and a high-quality courtyard can only compensate partly for high sound levels at façades facing the streets, thus, 16% and 29% were still noise annoyed at 58-62 and 63-68 dB, respectively. Implications of the "quiet"-side concept are discussed.

Attractive “Quiet” Courtyards: A Potential Modifier of Urban Residents’ Responses to Road Traffic Noise?

PubMed Central

Gidlöf-Gunnarsson, Anita; Öhrström, Evy

2010-01-01

The present paper explores the influence of the physical environmental qualities of “quiet”. courtyards (degree of naturalness and utilization) on residents’ noise responses. A questionnaire study was conducted in urban residential areas with road-traffic noise exposure between LAeq,24h 58 to 68 dB at the most exposed façade. The dwellings had “quiet” indoor section/s and faced a “quiet” outdoor courtyard (LAeq,24h < 48 dB façade reflex included). Data were collected from 385 residents and four groups were formed based on sound-level categories (58–62 and 63–68 dB) and classification of the “quiet” courtyards into groups with low and high physical environmental quality. At both sound-level categories, the results indicate that access to high-quality “quiet” courtyards is associated with less noise annoyance and noise-disturbed outdoor activities among the residents. Compared to low-quality “quiet” courtyards, high-quality courtyards can function as an attractive restorative environment providing residents with a positive soundscape, opportunities for rest, relaxation and play as well as social relations that potentially reduce the adverse effects of noise. However, access to quietness and a high-quality courtyard can only compensate partly for high sound levels at façades facing the streets, thus, 16% and 29% were still noise annoyed at 58–62 and 63–68 dB, respectively. Implications of the “quiet”-side concept are discussed. PMID:20948929

Effect of using reporting guidelines during peer review on quality of final manuscripts submitted to a biomedical journal: masked randomised trial

PubMed Central

Cortés, J; Ribera, J M; Cardellach, F; Selva-O’Callaghan, A; Kostov, B; García, L; Cirugeda, L; Altman, D G; González, J A; Sànchez, J A; Miras, F; Urrutia, A; Fonollosa, V; Rey-Joly, C; Vilardell, M

2011-01-01

Objective To investigate the effect of an additional review based on reporting guidelines such as STROBE and CONSORT on quality of manuscripts. Design Masked randomised trial. Population Original research manuscripts submitted to the Medicina Clínica journal from May 2008 to April 2009 and considered suitable for publication. Intervention Control group: conventional peer reviews alone. Intervention group: conventional review plus an additional review looking for missing items from reporting guidelines. Outcomes Manuscript quality, assessed with a 5 point Likert scale (primary: overall quality; secondary: average quality of specific items in paper). Main analysis compared groups as allocated, after adjustment for baseline factors (analysis of covariance); sensitivity analysis compared groups as reviewed. Adherence to reviewer suggestions assessed with Likert scale. Results Of 126 consecutive papers receiving conventional review, 34 were not suitable for publication. The remaining 92 papers were allocated to receive conventional reviews alone (n=41) or additional reviews (n=51). Four papers assigned to the conventional review group deviated from protocol; they received an additional review based on reporting guidelines. We saw an improvement in manuscript quality in favour of the additional review group (comparison as allocated, 0.25, 95% confidence interval –0.05 to 0.54; as reviewed, 0.33, 0.03 to 0.63). More papers with additional reviews than with conventional reviews alone improved from baseline (22 (43%) v eight (20%), difference 23.6% (3.2% to 44.0%), number needed to treat 4.2 (from 2.3 to 31.2), relative risk 2.21 (1.10 to 4.44)). Authors in the additional review group adhered more to suggestions from conventional reviews than to those from additional reviews (average increase 0.43 Likert points (0.19 to 0.67)). Conclusions Additional reviews based on reporting guidelines improve manuscript quality, although the observed effect was smaller than hypothesised and not definitively demonstrated. Authors adhere more to suggestions from conventional reviews than to those from additional reviews, showing difficulties in adhering to high methodological standards at the latest research phases. To boost paper quality and impact, authors should be aware of future requirements of reporting guidelines at the very beginning of their study. Trial registration and protocol Although registries do not include trials of peer review, the protocol design was submitted to sponsored research projects (Instituto de Salud Carlos III, PI081903). PMID:22108262

Preserving Cellulose Structure: Delignified Wood Fibers for Paper Structures of High Strength and Transparency.

PubMed

Yang, Xuan; Berthold, Fredrik; Berglund, Lars A

2018-05-23

To expand the use of renewable materials, paper products with superior mechanical and optical properties are needed. Although beating, bleaching, and additives are known to improve industrially produced Kraft pulp papers, properties are limited by the quality of the fibers. While the use of nanocellulose has been shown to significantly increase paper properties, the current cost associated with their production has limited their industrial relevance. Here, using a simple mild peracetic acid (PAA) delignification process on spruce, we produce hemicellulose-rich holocellulose fibers (28.8 wt %) with high intrinsic strength (1200 MPa for fibers with microfibrillar angle smaller than 10°). We show that PAA treatment causes less cellulose/hemicellulose degradation and better preserves cellulose nanostructure in comparison to conventional Kraft pulping. High-density holocellulose papers with superior mechanical properties (Young's modulus of 18 GPa and ultimate strength of 195 MPa) are manufactured using a water-based hot-pressing process, without the use of beating or additives. We propose that the preserved hemicelluloses act as "glue" in the interfiber region, improving both mechanical and optical properties of papers. Holocellulose fibers may be affordable and applicable candidates for making special paper/composites where high mechanical performance and/or optical transmittance are of interest.

Quality Control by Artificial Vision

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lam, Edmond Y.; Gleason, Shaun Scott; Niel, Kurt S.

2010-01-01

Computational technology has fundamentally changed many aspects of our lives. One clear evidence is the development of artificial-vision systems, which have effectively automated many manual tasks ranging from quality inspection to quantitative assessment. In many cases, these machine-vision systems are even preferred over manual ones due to their repeatability and high precision. Such advantages come from significant research efforts in advancing sensor technology, illumination, computational hardware, and image-processing algorithms. Similar to the Special Section on Quality Control by Artificial Vision published two years ago in Volume 17, Issue 3 of the Journal of Electronic Imaging, the present one invited papersmore » relevant to fundamental technology improvements to foster quality control by artificial vision, and fine-tuned the technology for specific applications. We aim to balance both theoretical and applied work pertinent to this special section theme. Consequently, we have seven high-quality papers resulting from the stringent peer-reviewing process in place at the Journal of Electronic Imaging. Some of the papers contain extended treatment of the authors work presented at the SPIE Image Processing: Machine Vision Applications conference and the International Conference on Quality Control by Artificial Vision. On the broad application side, Liu et al. propose an unsupervised texture image segmentation scheme. Using a multilayer data condensation spectral clustering algorithm together with wavelet transform, they demonstrate the effectiveness of their approach on both texture and synthetic aperture radar images. A problem related to image segmentation is image extraction. For this, O'Leary et al. investigate the theory of polynomial moments and show how these moments can be compared to classical filters. They also show how to use the discrete polynomial-basis functions for the extraction of 3-D embossed digits, demonstrating superiority over Fourier-basis functions for this task. Image registration is another important task for machine vision. Bingham and Arrowood investigate the implementation and results in applying Fourier phase matching for projection registration, with a particular focus on nondestructive testing using computed tomography. Readers interested in enriching their arsenal of image-processing algorithms for machine-vision tasks should find these papers enriching. Meanwhile, we have four papers dealing with more specific machine-vision tasks. The first one, Yahiaoui et al., is quantitative in nature, using machine vision for real-time passenger counting. Occulsion is a common problem in counting objects and people, and they circumvent this issue with a dense stereovision system, achieving 97 to 99% accuracy in their tests. On the other hand, the second paper by Oswald-Tranta et al. focuses on thermographic crack detection. An infrared camera is used to detect inhomogeneities, which may indicate surface cracks. They describe the various steps in developing fully automated testing equipment aimed at a high throughput. Another paper describing an inspection system is Molleda et al., which handles flatness inspection of rolled products. They employ optical-laser triangulation and 3-D surface reconstruction for this task, showing how these can be achieved in real time. Last but not least, Presles et al. propose a way to monitor the particle-size distribution of batch crystallization processes. This is achieved through a new in situ imaging probe and image-analysis methods. While it is unlikely any reader may be working on these four specific problems at the same time, we are confident that readers will find these papers inspiring and potentially helpful to their own machine-vision system developments.« less

A systematic review of studies measuring and reporting hearing aid usage in older adults since 1999: a descriptive summary of measurement tools.

PubMed

Perez, Elvira; Edmonds, Barrie A

2012-01-01

A systematic review was conducted to identify and quality assess how studies published since 1999 have measured and reported the usage of hearing aids in older adults. The relationship between usage and other dimensions of hearing aid outcome, age and hearing loss are summarised. Articles were identified through systematic searches in PubMed/MEDLINE, The University of Nottingham Online Catalogue, Web of Science and through reference checking. (1) participants aged fifty years or over with sensori-neural hearing loss, (2) provision of an air conduction hearing aid, (3) inclusion of hearing aid usage measure(s) and (4) published between 1999 and 2011. Of the initial 1933 papers obtained from the searches, a total of 64 were found eligible for review and were quality assessed on six dimensions: study design, choice of outcome instruments, level of reporting (usage, age, and audiometry) and cross validation of usage measures. Five papers were rated as being of high quality (scoring 10-12), 35 papers were rated as being of moderate quality (scoring 7-9), 22 as low quality (scoring 4-6) and two as very low quality (scoring 0-2). Fifteen different methods were identified for assessing the usage of hearing aids. Generally, the usage data reviewed was not well specified. There was a lack of consistency and robustness in the way that usage of hearing aids was assessed and categorised. There is a need for more standardised level of reporting of hearing aid usage data to further understand the relationship between usage and hearing aid outcomes.

Vocal characteristics of congenital anterior glottic webs in children: A case report.

PubMed

Shah, Jay; White, Katherine; Dohar, Joseph

2015-06-01

This case report describes a 5-year-old girl with chronic dysphonia and high-pitched voice since birth. Vocal quality was noted to be harsh. Videostroboscopy revealed significant hyperfunction and a Type II congenital anterior glottic web. Endoscopic division of the anterior glottic web was performed with significant improvement in vocal quality and quality of life. This paper describes methods of analyzing, diagnosing, and treating anterior glottic web with a focus on quality of life. Also, unique acoustic and aerodynamic voice features are identified. No other descriptions of a voice characteristic for anterior glottic web currently exist in the literature. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Expert opinions and scientific evidence for colonoscopy key performance indicators.

PubMed

Rees, Colin J; Bevan, Roisin; Zimmermann-Fraedrich, Katharina; Rutter, Matthew D; Rex, Douglas; Dekker, Evelien; Ponchon, Thierry; Bretthauer, Michael; Regula, Jaroslaw; Saunders, Brian; Hassan, Cesare; Bourke, Michael J; Rösch, Thomas

2016-12-01

Colonoscopy is a widely performed procedure with procedural volumes increasing annually throughout the world. Many procedures are now performed as part of colorectal cancer screening programmes. Colonoscopy should be of high quality and measures of this quality should be evidence based. New UK key performance indicators and quality assurance standards have been developed by a working group with consensus agreement on each standard reached. This paper reviews the scientific basis for each of the quality measures published in the UK standards. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Quality of the written radiology report: a review of the literature.

PubMed

Pool, Felicity; Goergen, Stacy

2010-08-01

A literature review was carried out, guided by the question, What are the important elements of a high-quality radiology written report? Two papers known to the authors were used as a basis for 5 PubMed search strategies. Exclusion criteria were applied to retrieved citations. Reference lists of retrieved citations were scanned for additional relevant papers and exclusion criteria applied to these. Web sites of professional radiology organizations were scanned for guidelines relating to the written radiology report. Retrieved guidelines were appraised using the Appraisal of Guidelines for Research & Evaluation instrument. Methodologies of retrieved papers were not suitable for conventional appraisal, and an evidence table was constructed. The search strategy identified 25 published papers and 4 guidelines. Published study methodologies included 1 randomized controlled trial; 1 before-and-after study of interventions; 10 observational studies, audits, or analyses; 12 surveys; and 1 narrative review of the literature. Existing guidelines have a number of weaknesses with regard to scope and purpose, methods of development, stakeholder consultation, and editorial independence and applicability. There is a major gap in published studies relating to testing of interventions to improve report quality using conventional randomized controlled trial methods. Published studies and guidelines generally support report content, including clinical history, examination quality, description of findings, comparison, and diagnosis. Important report attributes include accuracy, clarity, and certainty. There is wide variation in the language used to describe imaging findings and diagnostic certainty. Survey participants strongly preferred reports with structured or itemized formats, but few studies exist regarding the effect of report structure on quality. Copyright 2010 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Computer vision for RGB-D sensors: Kinect and its applications.

PubMed

Shao, Ling; Han, Jungong; Xu, Dong; Shotton, Jamie

2013-10-01

Kinect sensor, high-resolution depth and visual (RGB) sensing has become available for widespread use as an off-the-shelf technology. This special issue is specifically dedicated to new algorithms and/or new applications based on the Kinect (or similar RGB-D) sensors. In total, we received over ninety submissions from more than twenty countries all around the world. The submissions cover a wide range of areas including object and scene classification, 3-D pose estimation, visual tracking, data fusion, human action/activity recognition, 3-D reconstruction, mobile robotics, and so on. After two rounds of review by at least two (mostly three) expert reviewers for each paper, the Guest Editors have selected twelve high-quality papers to be included in this highly popular special issue. The papers that comprise this issue are briefly summarized.

College Quality Assurance Assurances. Mendip Papers 020.

ERIC Educational Resources Information Center

Sallis, E.; Hingley, P.

This paper discusses the increasing interest in quality assurance in British education including its measurement and management through the introduction of a quality assurance system. The reasons and benefits of beginning a quality assurance system are discussed, and questions of what constitutes quality, whether it is quality in fact…

The impact of menu energy labelling across socioeconomic groups: A systematic review.

PubMed

Sarink, Danja; Peeters, Anna; Freak-Poli, Rosanne; Beauchamp, Alison; Woods, Julie; Ball, Kylie; Backholer, Kathryn

2016-04-01

Menu energy labelling at point of purchase is gaining traction worldwide, yet the potential impact for different socioeconomic groups is unclear. We aimed to summarise evidence on the effectiveness of menu energy labelling by socioeconomic position (SEP). A systematic search for papers published to September 2015 was conducted using terms for labelling, food outlets, and SEP. Quality of studies was assessed. Results were summarised across stages of an intervention logic pathway. Eighteen papers were identified. Of twelve studies reporting the effect of menu energy labelling in low SEP populations, six reported on purchase outcomes. All but one of these reported no positive effect of the policy for this population. Two of the five studies that compared purchase outcomes of menu labelling across SEP groups reported that the policy was effective overall. These two studies reported either a significant decline in fast food calories purchased from consumers in high (but not low) SEP neighbourhoods or a significantly greater decline in calories purchased among consumers visiting stores in higher SEP neighbourhoods post policy implementation. None of the included papers reached the highest quality score. The current evidence describing the impact of menu energy labelling within or across SEP is limited in quantity and quality. Of the two studies that reported a positive benefit of menu energy labelling overall, both identified a greater effect on fast food purchases among consumers visiting stores in high compared to low SEP neighbourhoods. It is difficult to know whether the absence of effectiveness reported in low SEP populations represents a true lack of effectiveness or is a result of a more general lack of policy effectiveness or the limited quality of the reviewed studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Miniature Spatial Heterodyne Raman Spectrometer with a Cell Phone Camera Detector.

PubMed

Barnett, Patrick D; Angel, S Michael

2017-05-01

A spatial heterodyne Raman spectrometer (SHRS) with millimeter-sized optics has been coupled with a standard cell phone camera as a detector for Raman measurements. The SHRS is a dispersive-based interferometer with no moving parts and the design is amenable to miniaturization while maintaining high resolution and large spectral range. In this paper, a SHRS with 2.5 mm diffraction gratings has been developed with 17.5 cm -1 theoretical spectral resolution. The footprint of the SHRS is orders of magnitude smaller than the footprint of charge-coupled device (CCD) detectors typically employed in Raman spectrometers, thus smaller detectors are being explored to shrink the entire spectrometer package. This paper describes the performance of a SHRS with 2.5 mm wide diffraction gratings and a cell phone camera detector, using only the cell phone's built-in optics to couple the output of the SHRS to the sensor. Raman spectra of a variety of samples measured with the cell phone are compared to measurements made using the same miniature SHRS with high-quality imaging optics and a high-quality, scientific-grade, thermoelectrically cooled CCD.

Effect assessment in work environment interventions: a methodological reflection.

PubMed

Neumann, W P; Eklund, J; Hansson, B; Lindbeck, L

2010-01-01

This paper addresses a number of issues for work environment intervention (WEI) researchers in light of the mixed results reported in the literature. If researchers emphasise study quality over intervention quality, reviews that exclude case studies with high quality and multifactorial interventions may be vulnerable to 'quality criteria selection bias'. Learning from 'failed' interventions is inhibited by both publication bias and reporting lengths that limit information on relevant contextual and implementation factors. The authors argue for the need to develop evaluation approaches consistent with the complexity of multifactorial WEIs that: a) are owned by and aimed at the whole organisation; and b) include intervention in early design stages where potential impact is highest. Context variety, complexity and instability in and around organisations suggest that attention might usefully shift from generalisable 'proof of effectiveness' to a more nuanced identification of intervention elements and the situations in which they are more likely to work as intended. STATEMENT OF RELEVANCE: This paper considers ergonomics interventions from perspectives of what constitutes quality and 'proof". It points to limitations of traditional experimental intervention designs and argues that the complexity of organisational change, and the need for multifactorial interventions that reach deep into work processes for greater impact, should be recognised.

An Argument for Fewer Clinical Trials.

PubMed

Borgerson, Kirstin

2016-11-01

The volume of clinical research is increasing exponentially-far beyond our ability to process and absorb the results. Given this situation, it may be beneficial to consider reducing the flow at its source. In what follows, I will motivate and critically evaluate the following proposal: researchers should conduct fewer clinical trials. More specifically, I c onsider whether researchers should be permitted to conduct only clinical research of very high quality and, in turn, whether research ethics committees (RECs) should prohibit all other, lower-quality research, even when it might appear to meet some minimal ethical standard. Following a close analysis of the social-value requirement of ethical clinical research, I argue that this proposal is defensible. The problem identified in this paper has two parts, quantity and quality, and some clarification is needed about the latter because "quality" is a highly contested term in the medical literature. When some scholars advocate for high-quality trials, they mean large-scale, simple, explanatory randomized controlled trials. Others, including myself, have defended a different characterization of high-quality research that tends more toward pragmatic trial design and the use of methods other than RCTs. Pragmatic trials aim to provide evidence that directly supports clinical decision-making in "usual" care settings. Unlike explanatory trials, which aim to abstract away from particular settings and patients, in the hopes of creating ideal conditions for the success of an intervention, pragmatic trials deliberately pursue knowledge of high applicability, through the use of representative subjects, clinically important questions, flexible treatment protocols, patient-oriented outcome measures, and so on. I see applicability as a marker of high-quality research. The context in which research is meant to be applied should be the context in which new interventions are evaluated. © 2016 The Hastings Center.

Proceedings of the Space Shuttle Sortie Workshop. Volume 2: Working group reports

NASA Technical Reports Server (NTRS)

1972-01-01

Details are presented on the mission planning progress in each of the working paper reports. The general topics covered are the following: space technology; materials processing and space manufacturing; communications and navigation; earth and ocean physics; oceanography; earth resources and surface environmental quality; meteorology and atmospheric environmental quality; life sciences; atmospheric and space physics; solar physics; high energy cosmic rays; X-ray and gamma ray astronomy; ultraviolet-optical astronomy; planetary astronomy; and infrared astronomy.

High angle of attack flying qualities criteria for longitudinal rate command systems

NASA Technical Reports Server (NTRS)

Wilson, David J.; Citurs, Kevin D.; Davidson, John B.

1994-01-01

This study was designed to investigate flying qualities requirements of alternate pitch command systems for fighter aircraft at high angle of attack. Flying qualities design guidelines have already been developed for angle of attack command systems at 30, 45, and 60 degrees angle of attack, so this research fills a similar need for rate command systems. Flying qualities tasks that require post-stall maneuvering were tested during piloted simulations in the McDonnell Douglas Aerospace Manned Air Combat Simulation facility. A generic fighter aircraft model was used to test angle of attack rate and pitch rate command systems for longitudinal gross acquisition and tracking tasks at high angle of attack. A wide range of longitudinal dynamic variations were tested at 30, 45, and 60 degrees angle of attack. Pilot comments, Cooper-Harper ratings, and pilot induced oscillation ratings were taken from five pilots from NASA, USN, CAF, and McDonnell Douglas Aerospace. This data was used to form longitudinal design guidelines for rate command systems at high angle of attack. These criteria provide control law design guidance for fighter aircraft at high angle of attack, low speed flight conditions. Additional time history analyses were conducted using the longitudinal gross acquisition data to look at potential agility measures of merit and correlate agility usage to flying qualities boundaries. This paper presents an overview of this research.

Metamorphic III–V Solar Cells: Recent Progress and Potential

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garcia, Ivan; France, Ryan M.; Geisz, John F.

Inverted metamorphic multijunction solar cells have been demonstrated to be a pathway to achieve the highest photovoltaic (PV) conversion efficiencies. Attaining high-quality lattice-mismatched (metamorphic) semiconductor devices is challenging. However, recent improvements to compositionally graded buffer epitaxy and junction structures have led to the achievement of high-quality metamorphic solar cells exhibiting internal luminescence efficiencies over 90%. For this high material quality, photon recycling is significant, and therefore, the optical environment of the solar cell becomes important. In this paper, we first present recent progress and performance results for 1- and 0.7-eV GaInAs solar cells grown on GaAs substrates. Then, an electroopticalmore » model is used to assess the potential performance improvements in current metamorphic solar cells under different realizable design scenarios. The results show that the quality of 1-eV subcells is such that further improving its electronic quality does not produce significant Voc increases in the four-junction inverted metamorphic subcells, unless a back reflector is used to enhance photon recycling, which would significantly complicate the structure. Conversely, improving the electronic quality of the 0.7-eV subcell would lead to significant Voc boosts, driving the progress of four-junction inverted metamorphic solar cells.« less

Analysis of batch-related influences on injection molding processes viewed in the context of electro plating quality demands

NASA Astrophysics Data System (ADS)

Siepmann, Jens P.; Wortberg, Johannes; Heinzler, Felix A.

2016-03-01

The injection molding process is mandatorily influenced by the viscosity of the material. By varying the material batch the viscosity of the polymer changes. For the process and part quality the initial conditions of the material in addition to the processing parameters define the process and product quality. A high percentage of technical polymers processed in injection molding is refined in a follow-up production step, for example electro plating. Processing optimized for electro plating often requires avoiding high shear stresses by using low injection speed and pressure conditions. Therefore differences in the material charges' viscosity occur especially in the quality related low shear rate area. These differences and quality related influences can be investigated by high detail rheological analysis and process simulation based on adapted material describing models. Differences in viscosity between batches can be detected by measurements with high-pressure-capillary-rheometers or oscillatory rheometers for low shear rates. A combination of both measurement techniques is possible by the Cox-Merz-Relation. The detected differences in the rheological behavior of both charges are summarized in two material behavior describing model approaches and added to the simulation. In this paper the results of processing-simulations with standard filling parameters are presented with two ABS charges. Part quality defining quantities such as temperature, pressure and shear stress are investigated and the influence of charge variations is pointed out with respect to electro plating quality demands. Furthermore, the results of simulations with a new quality related process control are presented and compared to the standard processing.

Quality control of commercial bovine lactoferrin.

PubMed

Wakabayashi, Hiroyuki; Yamauchi, Koji; Abe, Fumiaki

2018-06-01

Herein we review commercial bovine lactoferrin quality issues by describing an example of industrial production, the current status of global quality standardization, and quality-activity concerns for further discussion. Morinaga Milk Industry has been industrially producing bovine lactoferrin in Milei GmbH, Germany, since 1989. We delineate its production and quality as an example of safe and high-quality manufacturing. Currently, global standardization in the quality of bovine lactoferrin is progressing through Novel Food and GRAS in the EU and USA, respectively. Novel Food was applied or notified to seven lactoferrin manufacturers and GRAS was notified to three manufacturers, two of which are for infant use and one is for adult use, by the end of 2017. The specifications of these regulations are relatively high, including more than 95% lactoferrin purity in protein, which means that such companies can supply relatively high-grade lactoferrin. There appear to be several concerns regarding lactoferrin quality affecting activities, including contamination of lipopolysaccharide (LPS) and angiogenin, purity, and degradation of lactoferrin sample. Although LPS is immunologically toxic when invading the body, it is distributed normally in foods and the gut. However, an industrial lactoferrin sample may contain LPS at a maximum LPS/lactoferrin molecule ratio = 1/1724, which means 99.9% of the lactoferrin molecule is LPS-free. It is difficult to speculate that LPS contained in a lactoferrin sample affects its activities. Finally in order to achieve good and reproducible results, we make proposals to researchers a use of high-grade lactoferrin, careful storage, and indication the manufacturers' names and specifications in the paper.

Curved Microneedle Array-Based sEMG Electrode for Robust Long-Term Measurements and High Selectivity

PubMed Central

Kim, Minjae; Kim, Taewan; Kim, Dong Sung; Chung, Wan Kyun

2015-01-01

Surface electromyography is widely used in many fields to infer human intention. However, conventional electrodes are not appropriate for long-term measurements and are easily influenced by the environment, so the range of applications of sEMG is limited. In this paper, we propose a flexible band-integrated, curved microneedle array electrode for robust long-term measurements, high selectivity, and easy applicability. Signal quality, in terms of long-term usability and sensitivity to perspiration, was investigated. Its motion-discriminating performance was also evaluated. The results show that the proposed electrode is robust to perspiration and can maintain a high-quality measuring ability for over 8 h. The proposed electrode also has high selectivity for motion compared with a commercial wet electrode and dry electrode. PMID:26153773

Teachers' Lives in Context: A Framework for Understanding Barriers to High Quality Teaching within Resource Deprived Settings

ERIC Educational Resources Information Center

Schwartz, Kate; Cappella, Elise; Aber, J. Lawrence

2016-01-01

Within low-income communities in low- and high-resource countries, there is a profound need for more effective schools that are better able to foster child and youth development and support student learning. This paper presents a theoretical framework for understanding the role of teacher ecology in influencing teacher effectiveness and, through…

Massachusetts Charter Public Schools: Best Practices Using Data to Improve Student Achievement in Holyoke. White Paper No. 143

ERIC Educational Resources Information Center

Candal, Cara Stillings

2016-01-01

Holyoke Community Charter School (HCCS) provides high quality educational opportunities to students and families in a city where such opportunities are not widely available. A long waitlist, high lottery subscription, and low attrition rate are all evidence of community demand for the school. Student outcomes that surpass the district of Holyoke…

Opening-up Classroom Discourse to Promote and Enhance Active, Collaborative and Cognitively-Engaging Student Learning Experiences

ERIC Educational Resources Information Center

Hardman, Jan

2016-01-01

This paper places classroom discourse and interaction right at the heart of the teaching and learning process. It is built on the argument that high quality talk between the teacher and student(s) provides a fertile ground for an active, highly collaborative and cognitively stimulating learning process leading to improved learning outcomes. High…

Placing Deviance in a Legal and Local Context: A Multilevel Analysis of Cigarette Use in the European Union

ERIC Educational Resources Information Center

Vuolo, Mike

2012-01-01

Though it has produced a high-quality body of research, the study of substance use has remained highly individualized in its focus. This paper adds further sociological understanding to that research. Using hierarchical models, the following explores how institutional and criminological theories can be incorporated into substance use research by…

Ethnic Differences in the Nutritiousness of Diets of Hawai'i's Children.

ERIC Educational Resources Information Center

Lai, Morris K.; Shimabukuro, Sandra

Data on the nutritional quality of Hawaiian children's diet, arranged by age and ethnic group, are presented in this paper. The data are drawn from a random sampling of the diets of 890 students. Tables show mean nutritional intake and the percent of calories from protein, carbohydrate and fat for elementary, junior high and senior high school…

Customer and household matching: resolving entity identity in data warehouses

NASA Astrophysics Data System (ADS)

Berndt, Donald J.; Satterfield, Ronald K.

2000-04-01

The data preparation and cleansing tasks necessary to ensure high quality data are among the most difficult challenges faced in data warehousing and data mining projects. The extraction of source data, transformation into new forms, and loading into a data warehouse environment are all time consuming tasks that can be supported by methodologies and tools. This paper focuses on the problem of record linkage or entity matching, tasks that can be very important in providing high quality data. Merging two or more large databases into a single integrated system is a difficult problem in many industries, especially in the wake of acquisitions. For example, managing customer lists can be challenging when duplicate entries, data entry problems, and changing information conspire to make data quality an elusive target. Common tasks with regard to customer lists include customer matching to reduce duplicate entries and household matching to group customers. These often O(n2) problems can consume significant resources, both in computing infrastructure and human oversight, and the goal of high accuracy in the final integrated database can be difficult to assure. This paper distinguishes between attribute corruption and entity corruption, discussing the various impacts on quality. A metajoin operator is proposed and used to organize past and current entity matching techniques. Finally, a logistic regression approach to implementing the metajoin operator is discussed and illustrated with an example. The metajoin can be used to determine whether two records match, don't match, or require further evaluation by human experts. Properly implemented, the metajoin operator could allow the integration of individual databases with greater accuracy and lower cost.

Theory research of seam recognition and welding torch pose control based on machine vision

NASA Astrophysics Data System (ADS)

Long, Qiang; Zhai, Peng; Liu, Miao; He, Kai; Wang, Chunyang

2017-03-01

At present, the automation requirement of the welding become higher, so a method of the welding information extraction by vision sensor is proposed in this paper, and the simulation with the MATLAB has been conducted. Besides, in order to improve the quality of robot automatic welding, an information retrieval method for welding torch pose control by visual sensor is attempted. Considering the demands of welding technology and engineering habits, the relative coordinate systems and variables are strictly defined, and established the mathematical model of the welding pose, and verified its feasibility by using the MATLAB simulation in the paper, these works lay a foundation for the development of welding off-line programming system with high precision and quality.

[Construction and application of economy-pollution-environment three-dimensional evaluation model for district].

PubMed

Fan, Xin-Gang; Mi, Wen-Bao; Ma, Zhen-Ning

2015-02-01

For deep analysis on the regional environmental economic system, the paper analyzes the mutual relation of regional economy development, environmental quality, environmental pollution, and builds the theoretical basis. Then, the economy-pollution-environment quality three-dimensional coupling evaluation model for district is constructed. It includes economic development level index, environmental pollution index, and environmental quality index. The model is a cube, which has spatialization and visualization characteristics. The model includes 8 sub cubes, which expresses 8 types of state, e. g. low pollution-inferior quality-low level of economic development etc. The model can be used to evaluate the status of region, divide development phase, analyze evolution trend etc. It has two ways including relative meaning evaluation (RME) and absolute meaning evaluation (AME). Based on the model, Yinchuan City in the Ningxia Hui Autonomous Region is used as an example for the empirical study. Using RME, compared with Guangzhou city, The result shows that the Yinchuan City has been a high pollution-low quality-low level of economic development state for a long period during 1996-2010. After 2007, the state changed to a high pollution-high quality-low level of economic development. Now, the environmental quality of Yinchuan city gets better, but pollutant discharge pressure is high, and tends to be the break point of high environment quality and low environment. With AME, using national standard, the Yinchuan City remains a high pollution-low quality-low level of economic development state during 1996-2010. Empirical research verifies that different target reference areas and relevant national standards have different main parameters, the evaluating result has an flexible range. The dimensionless data enhances the coupling of index. The data position in model increases the visibility to the environmental management decisions. The model improves mismatches of calculated data size, time asymmetry of spatial data, verification of the former multi-target coupling model.

Flight test experience with high-alpha control system techniques on the F-14 airplane

NASA Technical Reports Server (NTRS)

Gera, J.; Wilson, R. J.; Enevoldson, E. K.; Nguyen, L. T.

1981-01-01

Improved handling qualities of fighter aircraft at high angles of attack can be provided by various stability and control augmentation techniques. NASA and the U.S. Navy are conducting a joint flight demonstration of these techniques on an F-14 airplane. This paper reports on the flight test experience with a newly designed lateral-directional control system which suppresses such high angle of attack handling qualities problems as roll reversal, wing rock, and directional divergence while simultaneously improving departure/spin resistance. The technique of integrating a piloted simulation into the flight program was used extensively in this program. This technique had not been applied previously to high angle of attack testing and required the development of a valid model to simulate the test airplane at extremely high angles of attack.

Simulation on turning aspheric surface method via oscillating feed

NASA Astrophysics Data System (ADS)

Kong, Fanxing; Li, Zengqiang; Sun, Tao

2014-08-01

It is quite difficult to manufacturing optical components, the combination of high gradient ellipsoid and hyperboloid, with high machining surface requirements. To solve the problem, in this paper we present a turning and forming method via oscillating feed of R-θ layout lathe, analyze machining ellipsoid segment and hyperboloid segment separately through oscillating feed. Also calculate parameters on each trajectory during processing respectively and obtain displacement, velocity, acceleration and other parameters. The simulation result shows that this rotary turning method is capable of ensuring that the cutter is on the equidistance line of meridian cross section curve of work piece during processing high gradient aspheric surface, which helps getting high quality surface. Also the method provides a new approach and a theory basis for manufacturing high quality aspheric surface and extending function of the available twin-spindle lathe as well.

High dynamic range subjective testing

NASA Astrophysics Data System (ADS)

Allan, Brahim; Nilsson, Mike

2016-09-01

This paper describes of a set of subjective tests that the authors have carried out to assess the end user perception of video encoded with High Dynamic Range technology when viewed in a typical home environment. Viewers scored individual single clips of content, presented in High Definition (HD) and Ultra High Definition (UHD), in Standard Dynamic Range (SDR), and in High Dynamic Range (HDR) using both the Perceptual Quantizer (PQ) and Hybrid Log Gamma (HLG) transfer characteristics, and presented in SDR as the backwards compatible rendering of the HLG representation. The quality of SDR HD was improved by approximately equal amounts by either increasing the dynamic range or increasing the resolution to UHD. A further smaller increase in quality was observed in the Mean Opinion Scores of the viewers by increasing both the dynamic range and the resolution, but this was not quite statistically significant.

[AIDS prevention among adolescents in school: a systematic review of the efficacy of interventions].

PubMed

Juárez, O; Díez, E

1999-01-01

Preventive interventions are considered useful although poorly evaluated. Since 1990 there are growing evidences of effective school aids prevention interventions. This paper aims to identify school aids prevention programs among youngsters aged 13 to 19, published between 1990 and 1995, to analyze each evaluation and intervention quality, to assess their effectiveness as well as identifying the possible contributing factors. Location of reports by means of a Medline computerized search of published articles and reviews, which should include the following criteria: school aids prevention programs, addressed to youngsters aged 13 to 19, published in Spanish, French or English between 1990 and 1995 in scientific literature, and evaluating changes in behavior or its determinants through quantitative measures. Analysis of the evaluation quality through the assessment of the sample size, the use of a control group, the groups comparability, the drop out analysis and the time between the pretest and the posttest. Intervention quality analysis through the use of a psychological behavioral change model and the number of sessions. The effectiveness of the high quality interventions in changing behaviors, intentions, attitudes and knowledge was assessed. 29 studies were selected. Of these studies, relating the quality of evaluation criteria, a 28% was considered a high quality study, a 14% an intermediate quality study and a 58% a low quality one. In relation to intervention quality criteria, a 27% was found to be a high quality study, a 41% an intermediate quality study and 32% a low quality one. 38% (11 studies) showed high or intermediate quality criteria at the same time in intervention and in evaluation. All these studies modified knowledge and attitudes, an 80% modified the intention to behave and a 86% modified behavior. The increase in knowledge and attitudes was in general quite important, greater than 10%, and changes in intentions and behaviors were smaller than 10%, although relevant. Only 38% of the studies may be considered of high or intermediate quality. Preventive interventions correctly evaluated which rely on a theoretical model and offer 4 or more sessions show evidence of moderate but relevant reduction of aids risk practices, and important changes of the future behavior determinants.

Design of a robust baseband LPC coder for speech transmission over 9.6 kbit/s noisy channels

NASA Astrophysics Data System (ADS)

Viswanathan, V. R.; Russell, W. H.; Higgins, A. L.

1982-04-01

This paper describes the design of a baseband Linear Predictive Coder (LPC) which transmits speech over 9.6 kbit/sec synchronous channels with random bit errors of up to 1%. Presented are the results of our investigation of a number of aspects of the baseband LPC coder with the goal of maximizing the quality of the transmitted speech. Important among these aspects are: bandwidth of the baseband, coding of the baseband residual, high-frequency regeneration, and error protection of important transmission parameters. The paper discusses these and other issues, presents the results of speech-quality tests conducted during the various stages of optimization, and describes the details of the optimized speech coder. This optimized speech coding algorithm has been implemented as a real-time full-duplex system on an array processor. Informal listening tests of the real-time coder have shown that the coder produces good speech quality in the absence of channel bit errors and introduces only a slight degradation in quality for channel bit error rates of up to 1%.

Chip Design Process Optimization Based on Design Quality Assessment

NASA Astrophysics Data System (ADS)

Häusler, Stefan; Blaschke, Jana; Sebeke, Christian; Rosenstiel, Wolfgang; Hahn, Axel

2010-06-01

Nowadays, the managing of product development projects is increasingly challenging. Especially the IC design of ASICs with both analog and digital components (mixed-signal design) is becoming more and more complex, while the time-to-market window narrows at the same time. Still, high quality standards must be fulfilled. Projects and their status are becoming less transparent due to this complexity. This makes the planning and execution of projects rather difficult. Therefore, there is a need for efficient project control. A main challenge is the objective evaluation of the current development status. Are all requirements successfully verified? Are all intermediate goals achieved? Companies often develop special solutions that are not reusable in other projects. This makes the quality measurement process itself less efficient and produces too much overhead. The method proposed in this paper is a contribution to solve these issues. It is applied at a German design house for analog mixed-signal IC design. This paper presents the results of a case study and introduces an optimized project scheduling on the basis of quality assessment results.

Evolution of Quality Assurance for Clinical Immunohistochemistry in the Era of Precision Medicine: Part 4: Tissue Tools for Quality Assurance in Immunohistochemistry.

PubMed

Cheung, Carol C; D'Arrigo, Corrado; Dietel, Manfred; Francis, Glenn D; Fulton, Regan; Gilks, C Blake; Hall, Jacqueline A; Hornick, Jason L; Ibrahim, Merdol; Marchetti, Antonio; Miller, Keith; van Krieken, J Han; Nielsen, Soren; Swanson, Paul E; Taylor, Clive R; Vyberg, Mogens; Zhou, Xiaoge; Torlakovic, Emina E

2017-04-01

The numbers of diagnostic, prognostic, and predictive immunohistochemistry (IHC) tests are increasing; the implementation and validation of new IHC tests, revalidation of existing tests, as well as the on-going need for daily quality assurance monitoring present significant challenges to clinical laboratories. There is a need for proper quality tools, specifically tissue tools that will enable laboratories to successfully carry out these processes. This paper clarifies, through the lens of laboratory tissue tools, how validation, verification, and revalidation of IHC tests can be performed in order to develop and maintain high quality "fit-for-purpose" IHC testing in the era of precision medicine. This is the final part of the 4-part series "Evolution of Quality Assurance for Clinical Immunohistochemistry in the Era of Precision Medicine."

Understanding the role of land use in urban stormwater quality management.

PubMed

Goonetilleke, Ashantha; Thomas, Evan; Ginn, Simon; Gilbert, Dale

2005-01-01

Urbanisation significantly impacts water environments with increased runoff and the degradation of water quality. The management of quantity impacts are straight forward, but quality impacts are far more complex. Current approaches to safeguard water quality are largely ineffective and guided by entrenched misconceptions with a primary focus on 'end-of-pipe' solutions. The outcomes of a research study presented in the paper, which investigated relationships between water quality and six different land uses offer practical guidance in the planning of future urban developments. In terms of safeguarding water quality, high-density residential development which results in a relatively smaller footprint would be the preferred option. The research study outcomes bring into question a number of fundamental concepts and misconceptions routinely accepted in stormwater quality management. The research findings confirmed the need to move beyond customary structural measures and identified the key role that urban planning can play in safeguarding urban water environments.

High Quality Facade Segmentation Based on Structured Random Forest, Region Proposal Network and Rectangular Fitting

NASA Astrophysics Data System (ADS)

Rahmani, K.; Mayer, H.

2018-05-01

In this paper we present a pipeline for high quality semantic segmentation of building facades using Structured Random Forest (SRF), Region Proposal Network (RPN) based on a Convolutional Neural Network (CNN) as well as rectangular fitting optimization. Our main contribution is that we employ features created by the RPN as channels in the SRF.We empirically show that this is very effective especially for doors and windows. Our pipeline is evaluated on two datasets where we outperform current state-of-the-art methods. Additionally, we quantify the contribution of the RPN and the rectangular fitting optimization on the accuracy of the result.

All MBE grown InAs/GaAs quantum dot lasers on on-axis Si (001).

PubMed

Kwoen, Jinkwan; Jang, Bongyong; Lee, Joohang; Kageyama, Takeo; Watanabe, Katsuyuki; Arakawa, Yasuhiko

2018-04-30

Directly grown III-V quantum dot (QD) laser on on-axis Si (001) is a good candidate for achieving monolithically integrated Si photonics light source. Nowadays, laser structures containing high quality InAs / GaAs QD are generally grown by molecular beam epitaxy (MBE). However, the buffer layer between the on-axis Si (001) substrate and the laser structure are usually grown by metal-organic chemical vapor deposition (MOCVD). In this paper, we demonstrate all MBE grown high-quality InAs/GaAs QD lasers on on-axis Si (001) substrates without using patterning and intermediate layers of foreign material.

The Electromagnetic Calorimeter of the future PANDA Detector

DOE Office of Scientific and Technical Information (OSTI.GOV)

Novotny, Rainer

2006-10-27

Experiments with a cooled antiproton beam at the future accelerator facility FAIR at GSI, Darmstadt, will be performed with the 4{pi} detector PANDA comprising a high resolution, compact and fast homogeneous electromagnetic calorimeter to detect photons between 10MeV and 10GeV energy inside a superconducting solenoid (2T). The target calorimeter comprises more than 20,000 PbWO4 crystals of significantly enhanced quality read-out with large area avalanche photodiodes at an operating temperature of -25 degree sign C. The paper describes the quality of PWO-II and illustrates the future performance based on response measurements with high-energy photons.

Intermediate quality control tests in the development of a superconducting RF cryomodule for CW operation

NASA Astrophysics Data System (ADS)

Pattalwar, Shrikant; Jones, Thomas; Strachan, John; Bate, Robert; Davies, Phil; McIntosh, Peter

2012-06-01

Through an international cryomodule collaboration, ASTeC at Daresbury Laboratory has taken the primary responsibility in leading the development of an optimised Superconducting RF (SRF) cryomodule, operating in CW mode for energy recovery facilities and other high duty cycle accelerators. For high beam current operation, Higher Order Mode (HOM) absorbers are critical components of the SRF Cryomodule, ensuring excessive heating of the accelerating structures and beam instabilities are effectively managed. This paper describes some of the cold tests conducted on the HOM absorbers and other critical components during the construction phase, to ensure that the quality and reliable cryomodule performance is maintained.

A Review on Advanced Treatment of Pharmaceutical Wastewater

NASA Astrophysics Data System (ADS)

Guo, Y.; Qi, P. S.; Liu, Y. Z.

2017-05-01

The composition of pharmaceutical wastewater is complex, which is high concentration of organic matter, microbial toxicity, high salt, and difficult to biodegrade. After secondary treatment, there are still trace amounts of suspended solids and dissolved organic matter. To improve the quality of pharmaceutical wastewater effluent, advanced treatment is essential. In this paper, the classification of the pharmaceutical technology was introduced, and the characteristics of pharmaceutical wastewater effluent quality were summarized. The methods of advanced treatment of pharmaceutical wastewater were reviewed afterwards, which included coagulation and sedimentation, flotation, activated carbon adsorption, membrane separation, advanced oxidation processes, membrane separation and biological treatment. Meanwhile, the characteristics of each process were described.

Study on fibre laser machining quality of plain woven CFRP laminates

NASA Astrophysics Data System (ADS)

Li, Maojun; Li, Shuo; Yang, Xujing; Zhang, Yi; Liang, Zhichao

2018-03-01

Laser cutting is suitable for large-scale and high-efficiency production with relatively high cutting speed, while machining of CFRP composite using lasers is challenging with severe thermal damage due to different material properties and sensitivity to heat. In this paper, surface morphology of cutting plain woven carbon fibre-reinforced plastics (CFRP) by fibre laser and the influence of cutting parameters on machined quality were investigated. A full factorial experimental design was employed involving three variable factors, which included laser pulse frequency at three levels together with laser power and cutting speed at two levels. Heat-affected zone (HAZ), kerf depth and kerf angle were quantified to understand the interactions with cutting parameters. Observations of machined surface were analysed relating to various damages using optical microscope and scanning electron microscopy (SEM), which included HAZ, matrix recession, fibre protruding, striations, fibre-end swelling, collapses, cavities and delamination. Based on ANOVA analysis, it was found that both cutting speed and laser power were significant factors for HAZ and kerf depth, while laser power was the only significant factor for kerf angle. Besides, HAZ and the kerf depth showed similar sensitivity to the pulse energy and energy per unit length, which was opposite for kerf angle. This paper presented the feasibility and experimental results of cutting CFRP laminates using fibre laser, which is possibly the efficient and high-quality process to promote the development of CFRPs.

Quality Issues in Propulsion

NASA Technical Reports Server (NTRS)

McCarty, John P.; Lyles, Garry M.

1997-01-01

Propulsion system quality is defined in this paper as having high reliability, that is, quality is a high probability of within-tolerance performance or operation. Since failures are out-of-tolerance performance, the probability of failures and their occurrence is the difference between high and low quality systems. Failures can be described at 3 levels: the system failure (which is the detectable end of a failure), the failure mode (which is the failure process), and the failure cause (which is the start). Failure causes can be evaluated & classified by type. The results of typing flight history failures shows that most failures are in unrecognized modes and result from human error or noise, i.e. failures are when engineers learn how things really work. Although the study based on US launch vehicles, a sampling of failures from other countries indicates the finding has broad application. The parameters of the design of a propulsion system are not single valued, but have dispersions associated with the manufacturing of parts. Many tests are needed to find failures, if the dispersions are large relative to tolerances, which could contribute to the large number of failures in unrecognized modes.

An Alternative View of Quality Assurance and Enhancement

ERIC Educational Resources Information Center

Wong, Viola Yuk-Yue

2012-01-01

This paper attempts to deal with the elusive nature of quality in quality management, using a case study to examine quality control measures implemented in an academic context and to show an emergent framework for quality enhancement. This paper introduces the concept of the ecology of quality assurance and examines efforts to maintain and advance…

Quality Assurance in Higher Education: A Review of Literature

ERIC Educational Resources Information Center

Ryan, Tricia

2015-01-01

This paper examines the literature surrounding quality assurance in global higher education. It provides an overview of accreditation as a mechanism to ensure quality in higher education, examines models of QA, and explores the concept of quality (including definitions of quality and quality assurance). In addition, this paper provides a review of…

Workplace management of upper limb disorders: a systematic review.

PubMed

Dick, F D; Graveling, R A; Munro, W; Walker-Bone, K

2011-01-01

Upper limb pain is common among working-aged adults and a frequent cause of absenteeism. To systematically review the evidence for workplace interventions in four common upper limb disorders. Systematic review of English articles using Medline, Embase, Cinahl, AMED, Physiotherapy Evidence Database PEDro (carpal tunnel syndrome and non-specific arm pain only) and Cochrane Library. Study inclusion criteria were randomized controlled trials, cohort studies or systematic reviews employing any workplace intervention for workers with carpal tunnel syndrome, non-specific arm pain, extensor tenosynovitis or lateral epicondylitis. Papers were selected by a single reviewer and appraised by two reviewers independently using methods based on Scottish Intercollegiate Guidelines Network (SIGN) methodology. 1532 abstracts were identified, 28 papers critically appraised and four papers met the minimum quality standard (SIGN grading + or ++) for inclusion. There was limited evidence that computer keyboards with altered force displacement characteristics or altered geometry were effective in reducing carpal tunnel syndrome symptoms. There was limited, but high quality, evidence that multi-disciplinary rehabilitation for non-specific musculoskeletal arm pain was beneficial for those workers absent from work for at least four weeks. In adults with tenosynovitis there was limited evidence that modified computer keyboards were effective in reducing symptoms. There was a lack of high quality evidence to inform workplace management of lateral epicondylitis. Further research is needed focusing on occupational management of upper limb disorders. Where evidence exists, workplace outcomes (e.g. successful return to pre-morbid employment; lost working days) are rarely addressed.

Dynamic power scheduling system for JPEG2000 delivery over wireless networks

NASA Astrophysics Data System (ADS)

Martina, Maurizio; Vacca, Fabrizio

2003-06-01

Third generation mobile terminals diffusion is encouraging the development of new multimedia based applications. The reliable transmission of audiovisual content will gain major interest being one of the most valuable services. Nevertheless, mobile scenario is severely power constrained: high compression ratios and refined energy management strategies are highly advisable. JPEG2000 as the source encoding stage assures excellent performance with extremely good visual quality. However the limited power budged imposes to limit the computational effort in order to save as much power as possible. Starting from an error prone environment, as the wireless one, high error-resilience features need to be employed. This paper tries to investigate the trade-off between quality and power in such a challenging environment.

Occurrence of post traumatic stress symptoms and their relationship to professional quality of life (ProQoL) in nursing staff at a forensic psychiatric security unit: a cross-sectional study.

PubMed

Lauvrud, Christian; Nonstad, Kåre; Palmstierna, Tom

2009-04-16

Violence is frequent towards nurses in forensic mental health hospitals. Implications of this high risk environment have not been systematically explored. This paper explores occurrence of symptoms on post traumatic stress and their relationship to professional quality of life. Self report questionnaires assessing symptoms of post traumatic stress and professional quality of life were distributed among psychiatric nurses in a high security forensic psychiatric unit with high frequency of violent behaviour. Relationships between post traumatic stress symptoms, forensic nursing experience, type of ward and compassion satisfaction, burnout and compassion fatigue were explored. The prevalence of post traumatic stress symptoms was low. Low scores were found on compassion satisfaction. Length of psychiatric nursing experience and low scores on compassion satisfaction were correlated to increased post traumatic stress symptoms. Although high violence frequency, low rate of post traumatic stress symptoms and low compassion satisfaction scores was found. High staff/patient ratio and emotional distance between staff and patients are discussed as protective factors.

Occurrence of post traumatic stress symptoms and their relationship to professional quality of life (ProQoL) in nursing staff at a forensic psychiatric security unit: a cross-sectional study

PubMed Central

Lauvrud, Christian; Nonstad, Kåre; Palmstierna, Tom

2009-01-01

Background Violence is frequent towards nurses in forensic mental health hospitals. Implications of this high risk environment have not been systematically explored. This paper explores occurrence of symptoms on post traumatic stress and their relationship to professional quality of life. Methods Self report questionnaires assessing symptoms of post traumatic stress and professional quality of life were distributed among psychiatric nurses in a high security forensic psychiatric unit with high frequency of violent behaviour. Relationships between post traumatic stress symptoms, forensic nursing experience, type of ward and compassion satisfaction, burnout and compassion fatigue were explored. Results The prevalence of post traumatic stress symptoms was low. Low scores were found on compassion satisfaction. Length of psychiatric nursing experience and low scores on compassion satisfaction were correlated to increased post traumatic stress symptoms. Conclusion Although high violence frequency, low rate of post traumatic stress symptoms and low compassion satisfaction scores was found. High staff/patient ratio and emotional distance between staff and patients are discussed as protective factors. PMID:19371413

Electroforming of optical tooling in high-strength Ni-Co alloy

NASA Astrophysics Data System (ADS)

Stein, Berl

2003-05-01

Plastic optics are often mass produced by injection, compression or injection-compression molding. Optical quality molds can be directly machined in appropriate materials (tool steels, electroless nickel, aluminum, etc.), but much greater cost efficiency can be achieved with electroformed modl inserts. Traditionally, electroforming of optical quality mold inserts has been carried out in nickel, a material much softer than tool steels which, when hardened to 45 - 50 HRc usually exhibit high wear resistance and long service life (hundreds of thousands of impressions per mold). Because of their low hardness (< 20 HRc), nickel molds can produce only tens of thousands of parts before they are scrapped due to wear or accidental damage. This drawback prevented their wider usage in general plastic and optical mold making. Recently, NiCoForm has developed a proprietary Ni-CO electroforming bath combining the high strength and wear resistance of the alloy with the low stress and high replication fidelity typical of pure nickel electroforming. This paper will outline the approach to electroforming of optical quality tooling in low stress, high strength Ni-Co alloy and present several examples of electroformed NiColoy mold inserts.

Perspectives to breed for improved baking quality wheat varieties adapted to organic growing conditions.

PubMed

Osman, Aart M; Struik, Paul C; van Bueren, Edith T Lammerts

2012-01-30

Northwestern European consumers like their bread to be voluminous and easy to chew. These attributes require a raw material that is rich in protein with, among other characteristics, a suitable ratio between gliadins and glutenins. Achieving this is a challenge for organic growers, because they lack cultivars that can realise high protein concentrations under the relatively low and variable availability of nitrogen during the grain-filling phase common in organic farming. Relatively low protein content in wheat grains thus needs to be compensated by a high proportion of high-quality protein. Organic farming therefore needs cultivars with genes encoding for optimal levels of glutenins and gliadins, a maximum ability for nitrogen uptake, a large storage capacity of nitrogen in the biomass, an adequate balance between vegetative and reproductive growth, a high nitrogen translocation efficiency for the vegetative parts into the grains during grain filling and an efficient conversion of nitrogen into high-quality proteins. In this perspective paper the options to breed and grow such varieties are discussed. Copyright © 2011 Society of Chemical Industry.

British standard (BS) 5750--quality assurance?

PubMed

Pratt, D J

1995-04-01

BS5750 is the British Standard on "Quality Systems". Its equivalent in European Standards is EN29000 and in the International Standards Organisation ISO9000. This paper points out that these standards lay down formalised procedures and require documentation but do not ipso facto lead to quality assurance. The author points to the Japanese post-war industrial success as being an example of Total Quality Management within the framework provided by the philosophy of Dr. W. Edwards Deming (1988 and 1993). This philosophy on the management of "systems" to provide high quality products and services is briefly outlined. The author argues that improvement in prosthetic and orthotic services will not be reached through implementation of BS5750 but rather through radical rethinking and the adoption and application of the Deming philosophy.

[Application of THz technology to nondestructive detection of agricultural product quality].

PubMed

Jiang, Yu-ying; Ge, Hong-yi; Lian, Fei-yu; Zhang, Yuan; Xia, Shan-hong

2014-08-01

With recent development of THz sources and detector, applications of THz radiation to nondestructive testing and quality control have expanded in many fields, such as agriculture, safety inspection and quality control, medicine, biochemistry, communication etc. Compared with other detection technique, being a new kind of technique, THz radiation has low energy, good perspectivity, and high signal-to-noise ratio, and thus can obtain physical, chemical and biological information. This paper first introduces the basic concept of THz radiation and the major properties, then gives an extensive review of recent research progress in detection of the quality of agricultural products via THz technique, analyzes the existing shortcomings of THz detection and discusses the outlook of potential application, finally proposes the new application of THz technique to detection of quality of stored grain.

A standard for measuring metadata quality in spectral libraries

NASA Astrophysics Data System (ADS)

Rasaiah, B.; Jones, S. D.; Bellman, C.

2013-12-01

A standard for measuring metadata quality in spectral libraries Barbara Rasaiah, Simon Jones, Chris Bellman RMIT University Melbourne, Australia barbara.rasaiah@rmit.edu.au, simon.jones@rmit.edu.au, chris.bellman@rmit.edu.au ABSTRACT There is an urgent need within the international remote sensing community to establish a metadata standard for field spectroscopy that ensures high quality, interoperable metadata sets that can be archived and shared efficiently within Earth observation data sharing systems. Metadata are an important component in the cataloguing and analysis of in situ spectroscopy datasets because of their central role in identifying and quantifying the quality and reliability of spectral data and the products derived from them. This paper presents approaches to measuring metadata completeness and quality in spectral libraries to determine reliability, interoperability, and re-useability of a dataset. Explored are quality parameters that meet the unique requirements of in situ spectroscopy datasets, across many campaigns. Examined are the challenges presented by ensuring that data creators, owners, and data users ensure a high level of data integrity throughout the lifecycle of a dataset. Issues such as field measurement methods, instrument calibration, and data representativeness are investigated. The proposed metadata standard incorporates expert recommendations that include metadata protocols critical to all campaigns, and those that are restricted to campaigns for specific target measurements. The implication of semantics and syntax for a robust and flexible metadata standard are also considered. Approaches towards an operational and logistically viable implementation of a quality standard are discussed. This paper also proposes a way forward for adapting and enhancing current geospatial metadata standards to the unique requirements of field spectroscopy metadata quality. [0430] BIOGEOSCIENCES / Computational methods and data processing [0480] BIOGEOSCIENCES / Remote sensing [1904] INFORMATICS / Community standards [1912] INFORMATICS / Data management, preservation, rescue [1926] INFORMATICS / Geospatial [1930] INFORMATICS / Data and information governance [1946] INFORMATICS / Metadata [1952] INFORMATICS / Modeling [1976] INFORMATICS / Software tools and services [9810] GENERAL OR MISCELLANEOUS / New fields

Radiation Hardened, Modulator ASIC for High Data Rate Communications

NASA Technical Reports Server (NTRS)

McCallister, Ron; Putnam, Robert; Andro, Monty; Fujikawa, Gene

2000-01-01

Satellite-based telecommunication services are challenged by the need to generate down-link power levels adequate to support high quality (BER approx. equals 10(exp 12)) links required for modem broadband data services. Bandwidth-efficient Nyquist signaling, using low values of excess bandwidth (alpha), can exhibit large peak-to-average-power ratio (PAPR) values. High PAPR values necessitate high-power amplifier (HPA) backoff greater than the PAPR, resulting in unacceptably low HPA efficiency. Given the high cost of on-board prime power, this inefficiency represents both an economical burden, and a constraint on the rates and quality of data services supportable from satellite platforms. Constant-envelope signals offer improved power-efficiency, but only by imposing a severe bandwidth-efficiency penalty. This paper describes a radiation- hardened modulator which can improve satellite-based broadband data services by combining the bandwidth-efficiency of low-alpha Nyquist signals with high power-efficiency (negligible HPA backoff).

West Asian Special Libraries and Information Centers.

ERIC Educational Resources Information Center

Harvey, John F.

Special libraries are defined in this paper as those libraries serving such institutions as government offices, private corporations, associations, and university departments. Information centers are similar to special libraries but provide personalized, high quality reference service, usually in science and technology, and often using mechanical…

Automated grain extraction and classification by combining improved region growing segmentation and shape descriptors in electromagnetic mill classification system

NASA Astrophysics Data System (ADS)

Budzan, Sebastian

2018-04-01

In this paper, the automatic method of grain detection and classification has been presented. As input, it uses a single digital image obtained from milling process of the copper ore with an high-quality digital camera. The grinding process is an extremely energy and cost consuming process, thus granularity evaluation process should be performed with high efficiency and time consumption. The method proposed in this paper is based on the three-stage image processing. First, using Seeded Region Growing (SRG) segmentation with proposed adaptive thresholding based on the calculation of Relative Standard Deviation (RSD) all grains are detected. In the next step results of the detection are improved using information about the shape of the detected grains using distance map. Finally, each grain in the sample is classified into one of the predefined granularity class. The quality of the proposed method has been obtained by using nominal granularity samples, also with a comparison to the other methods.

Quality of work life, burnout, and stress in emergency department physicians: a qualitative review.

PubMed

Bragard, Isabelle; Dupuis, Gilles; Fleet, Richard

2015-08-01

A 2006 literature review reported that emergency department (ED) physicians showed elevated burnout levels and highlighted several environment and personal issues contributing toward burnout. Research on burnout in EDs is limited. We propose an updated qualitative review on the relationships between work stress, burnout, and quality of work life in ED physicians. We searched MEDLINE, PsycInfo, and Science Direct for studies published since 2005. Of 491 papers, 10 papers were retained, using validated measures and having a minimum of 75 participants. Data extraction was performed manually by the first author and was reviewed by the second author. The majority of the studies used large samples, cross-sectional designs, random, and/or stratified assignment. ED physicians showed moderate to high levels of burnout with difficult work conditions including significant psychological demands, lack of resources, and poor support. Nonetheless, physicians reported high job satisfaction. Further studies should focus on the implementation of measures designed to prevent burnout.

A Tamper-Resistant and Portable Healthcare Folder

PubMed Central

Anciaux, Nicolas; Berthelot, Morgane; Braconnier, Laurent; Bouganim, Luc; De la Blache, Martine; Gardarin, Georges; Kesmarszky, Philippe; Lartigue, Sophie; Navarre, Jean-François; Pucheral, Philippe; Vandewalle, Jean-Jacques; Zeitouni, Karine

2008-01-01

Electronic health record (EHR) projects have been launched in most developed countries to increase the quality of healthcare while decreasing its cost. The benefits provided by centralizing the healthcare information in database systems are unquestionable in terms of information quality, availability, and protection against failure. Yet, patients are reluctant to give to a distant server the control over highly sensitive data (e.g., data revealing a severe or shameful disease). This paper capitalizes on a new hardware portable device, associating the security of a smart card to the storage capacity of a USB key, to give back to the patient the control over his medical data. This paper shows how this device can complement a traditional EHR server to (1) protect and share highly sensitive data among trusted parties and (2) provide a seamless access to the data even in disconnected mode. The proposed architecture is experimented in the context of a medicosocial network providing medical care and social services at home for elderly people. PMID:18615200

Characterization of dairy cattle manure/wallboard paper compost mixture.

PubMed

Saludes, Ronaldo B; Iwabuchi, Kazunori; Miyatake, Fumihito; Abe, Yoshiyuki; Honda, Yoshifumi

2008-10-01

The aim of this research was to evaluate the use of manufacturing wallboard paper scraps as an alternative bulking agent for dairy cattle manure composting. The characteristics of the composting process were studied based on the changes in physico-chemical parameters and final compost quality. Composting of dairy cattle manure with wallboard paper was performed in a 481-L cylindrical reactor with vacuum-type aeration. Rapid degradation of organic matter was observed during the thermophilic stage of composting due to high microbial activity. High temperature and alkaline pH conditions promoted intense ammonia emission during the early stage of composting. The number of mesophilic and thermophilic microorganisms were found to be affected by changes in temperature at different composting stages. The total nitrogen (N), phosphorus (P), potassium (K), and sodium (Na) concentrations of the mixture did not change significantly after 28days of composting. However, the presence of gypsum in the paper scraps increased the calcium content of the final compost. The wallboard paper had no phyto-inhibitory effects as shown by high germination index of final compost (GI=99%).

Developing Flanagan's critical incident technique to elicit indicators of high and low quality nursing care from patients and their nurses.

PubMed

Norman, I J; Redfern, S J; Tomalin, D A; Oliver, S

1992-05-01

This paper discusses a development of Flanagan's critical incident technique (CIT) to elicit indicators of high and low quality nursing from patients and their nurses on medical, surgical and elderly care wards. Stages in undertaking the CIT are identified and presuppositions held by most researchers about the nature of the technique are identified. The paper describes how the authors moved to a different set of presuppositions during the course of the study. Preliminary analysis of interview transcripts revealed that critical incidents need not always be demarcated scenes with a clear beginning and end, but may arise from respondents summarizing their overall experience within their description of one incident. Characteristically respondents were unable to give a detailed account of such incidents but validity may be established by the fact that respondents appear to recount what actually happened as they saw it, and what they said was clearly important to them. The researchers found that the most appropriate basic unit of analysis was not the incident itself but 'happenings' revealed by incidents that are 'critical' by virtue of being important to respondents with respect to the quality of nursing care. The importance of CIT researchers achieving an understanding of the 'meaning' of critical happenings to respondents is emphasized. Analysis of the interview transcripts is facilitated by the use of INGRES, a relational database computer program which should enable a 'personal theory' of quality nursing for each respondent, both patients and nurses, to be described. The study suggests that the CIT is a flexible technique which may be adapted to meet the demands of nursing research. If carefully applied, the CIT seems capable of capitalizing on respondents' own stories and avoids the loss of information which occurs when complex narratives are reduced to simple descriptive categories. Patients and nurses have unique perspectives on nursing and their views are of primary importance in understanding what quality means with respect to the interpersonal processes that are integral to nursing care. This paper discusses the identification of indicators of quality nursing from interviews with patients and nurses using the authors' development of Flanagan's critical incident technique.

Low-latency fiber-millimeter-wave system for future mobile fronthauling

NASA Astrophysics Data System (ADS)

Tien Dat, Pham; Kanno, Atsushi; Yamamoto, Naokatsu; Kawanishi, Tetsuya

2016-02-01

A seamless combination of fiber and millimeter-wave (MMW) systems can be very attractive for future heterogeneous mobile networks such as 5G because of its flexibility and high bandwidth. Analog mobile signal transmission over seamless fiber-MMW systems is very promising to reduce the latency and the required band-width, and to simplify the systems. However, stable and high-performance seamless systems are indispensable to conserve the quality of the analog signal transmission. In this paper, we present several technologies to develop such seamless fiber-MMW systems. In the downlink direction, a high-performance system can be realized using a high-quality optical MMW signal generator and a self-homodyne MMW signal detector. In the uplink direction, a cascade of radio-on-radio and radio-over-fiber systems using a burst-mode optical amplifier can support bursty radio signal transmission. A full-duplex transmission with negligible interference effects can be realized using frequency multiplexing in the radio link and wavelength-division multiplexing in the optical link. A high-spectral efficiency MMW-over-fiber system using an intermediate frequency-over-fiber system and a high-quality remote delivery of a local oscillator signal is highly desirable to reduce the costs.

Stevens Institute SYS-625 Final Paper: Busy Parents Need Extremely Fast, Quality Home-Cooked Dinners That Their Kids Will Eat

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyers, Carol A.

This study provides a modern take on an age-old need: busy parents need extremely fast, high quality home-cooked dinners that their kids will eat. In the past decade, the number of choices that parents have for filling this need have proliferated, largely due to technological advances. Our study proposes to leverage this technology in building a system geared toward decreasing whining in kids and increasing the sanity of their parents.

Implementation of Three Text to Speech Systems for Kurdish Language

NASA Astrophysics Data System (ADS)

Bahrampour, Anvar; Barkhoda, Wafa; Azami, Bahram Zahir

Nowadays, concatenative method is used in most modern TTS systems to produce artificial speech. The most important challenge in this method is choosing appropriate unit for creating database. This unit must warranty smoothness and high quality speech, and also, creating database for it must reasonable and inexpensive. For example, syllable, phoneme, allophone, and, diphone are appropriate units for all-purpose systems. In this paper, we implemented three synthesis systems for Kurdish language based on syllable, allophone, and diphone and compare their quality using subjective testing.

Synthetic aperture radar signal data compression using block adaptive quantization

NASA Technical Reports Server (NTRS)

Kuduvalli, Gopinath; Dutkiewicz, Melanie; Cumming, Ian

1994-01-01

This paper describes the design and testing of an on-board SAR signal data compression algorithm for ESA's ENVISAT satellite. The Block Adaptive Quantization (BAQ) algorithm was selected, and optimized for the various operational modes of the ASAR instrument. A flexible BAQ scheme was developed which allows a selection of compression ratio/image quality trade-offs. Test results show the high quality of the SAR images processed from the reconstructed signal data, and the feasibility of on-board implementation using a single ASIC.

Analysis of Thickness and Quality factor of a Double Paddle Oscillator at Room Temperature.

PubMed

Shakeel, Hamza; Metcalf, Thomas H; Pomeroy, J M

2016-01-01

In this paper, we evaluate the quality (Q) factor and the resonance frequency of a double paddle oscillator (DPO) with different thickness using analytical, computational and experimental methods. The study is carried out for the 2 nd anti-symmetric resonance mode that provides extremely high experimental Q factors on the order of 10 5 . The results show that both the Q factor and the resonance frequency of a DPO increase with the thickness at room temperature.

Dynamic stability and handling qualities tests on a highly augmented, statically unstable airplane

NASA Technical Reports Server (NTRS)

Gera, Joseph; Bosworth, John T.

1987-01-01

This paper describes some novel flight tests and analysis techniques in the flight dynamics and handling qualities area. These techniques were utilized during the initial flight envelope clearance of the X-29A aircraft and were largely responsible for the completion of the flight controls clearance program without any incidents or significant delays. The resulting open-loop and closed-loop frequency responses and the time history comparison using flight and linear simulation data are discussed.

Quantum Random Number Generation Using a Quanta Image Sensor

PubMed Central

Amri, Emna; Felk, Yacine; Stucki, Damien; Ma, Jiaju; Fossum, Eric R.

2016-01-01

A new quantum random number generation method is proposed. The method is based on the randomness of the photon emission process and the single photon counting capability of the Quanta Image Sensor (QIS). It has the potential to generate high-quality random numbers with remarkable data output rate. In this paper, the principle of photon statistics and theory of entropy are discussed. Sample data were collected with QIS jot device, and its randomness quality was analyzed. The randomness assessment method and results are discussed. PMID:27367698

Systematic review of scope and quality of electronic patient record data in primary care

PubMed Central

Thiru, Krish; Hassey, Alan; Sullivan, Frank

2003-01-01

Objective To systematically review measures of data quality in electronic patient records (EPRs) in primary care. Design Systematic review of English language publications, 1980-2001. Data sources Bibliographic searches of medical databases, specialist medical informatics databases, conference proceedings, and institutional contacts. Study selection Studies selected according to a predefined framework for categorising review papers. Data extraction Reference standards and measurements used to judge quality. Results Bibliographic searches identified 4589 publications. After primary exclusions 174 articles were classified, 52 of which met the inclusion criteria for review. Selected studies were primarily descriptive surveys. Variability in methods prevented meta-analysis of results. Forty eight publications were concerned with diagnostic data, 37 studies measured data quality, and 15 scoped EPR quality. Reliability of data was assessed with rate comparison. Measures of sensitivity were highly dependent on the element of EPR data being investigated, while the positive predictive value was consistently high, indicating good validity. Prescribing data were generally of better quality than diagnostic or lifestyle data. Conclusion The lack of standardised methods for assessment of quality of data in electronic patient records makes it difficult to compare results between studies. Studies should present data quality measures with clear numerators, denominators, and confidence intervals. Ambiguous terms such as “accuracy” should be avoided unless precisely defined. PMID:12750210

The development of vector based 2.5D print methods for a painting machine

NASA Astrophysics Data System (ADS)

Parraman, Carinna

2013-02-01

Through recent trends in the application of digitally printed decorative finishes to products, CAD, 3D additive layer manufacturing and research in material perception, [1, 2] there is a growing interest in the accurate rendering of materials and tangible displays. Although current advances in colour management and inkjet printing has meant that users can take for granted high-quality colour and resolution in their printed images, digital methods for transferring a photographic coloured image from screen to paper is constrained by pixel count, file size, colorimetric conversion between colour spaces and the gamut limits of input and output devices. This paper considers new approaches to applying alternative colour palettes by using a vector-based approach through the application of paint mixtures, towards what could be described as a 2.5D printing method. The objective is to not apply an image to a textured surface, but where texture and colour are integral to the mark, that like a brush, delineates the contours in the image. The paper describes the difference between the way inks and paints are mixed and applied. When transcribing the fluid appearance of a brush stroke, there is a difference between a halftone printed mark and a painted mark. The issue of surface quality is significant to subjective qualities when studying the appearance of ink or paint on paper. The paper provides examples of a range of vector marks that are then transcribed into brush stokes by the painting machine.

Modelling of 10 Gbps Free Space Optics Communication Link Using Array of Receivers in Moderate and Harsh Weather Conditions

NASA Astrophysics Data System (ADS)

Gupta, Amit; Shaina, Nagpal

2017-08-01

Intersymbol interference and attenuation of signal are two major parameters affecting the quality of transmission in Free Space Optical (FSO) Communication link. In this paper, the impact of these parameters on FSO communication link is analysed for delivering high-quality data transmission. The performance of the link is investigated under the influence of amplifier in the link. The performance parameters of the link like minimum bit error rate, received signal power and Quality factor are examined by employing erbium-doped fibre amplifier in the link. The effects of amplifier are visualized with the amount of received power. Further, the link is simulated for moderate weather conditions at various attenuation levels on transmitted signal. Finally, the designed link is analysed in adverse weather conditions by using high-power laser source for optimum performance.

Analysis of apple beverages treated with high-power ultrasound: a quality function deployment approach.

PubMed

Režek Jambrak, Anet; Šimunek, Marina; Grbeš, Franjo; Mandura, Ana; Djekic, Ilija

2018-04-01

The objective of this paper was to demonstrate application of quality function deployment in analysing effects of high power ultrasound on quality properties of apple juices and nectars. In order to develop a quality function deployment model, joint with instrumental analysis of treated samples, a field survey was performed to identify consumer preferences towards quality characteristics of juices/nectar. Based on field research, the three most important characteristics were 'taste' and 'aroma' with 28.5% of relative absolute weight importance, followed by 'odour' (16.9%). The quality function deployment model showed that the top three 'quality scores' for apple juice were treatments with amplitude 90 µm, 9 min treatment time and sample temperature 40 °C; 60 µm, 9 min, 60 °C; and 90 µm, 6 min, 40 °C. For nectars, the top three were treatments 120 µm, 9 min, 20 °C; 60 µm, 9 min, 60 °C; and A2.16 60 µm, 9 min, 20 °C. This type of quality model enables a more complex measure of large scale of different quality parameters. Its simplicity should be understood as its practical advantage and, as such, this tool can be a part of design quality when using novel preservation technologies. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Inverse Analysis to Formability Design in a Deep Drawing Process

NASA Astrophysics Data System (ADS)

Buranathiti, Thaweepat; Cao, Jian

Deep drawing process is an important process adding values to flat sheet metals in many industries. An important concern in the design of a deep drawing process generally is formability. This paper aims to present the connection between formability and inverse analysis (IA), which is a systematical means for determining an optimal blank configuration for a deep drawing process. In this paper, IA is presented and explored by using a commercial finite element software package. A number of numerical studies on the effect of blank configurations to the quality of a part produced by a deep drawing process were conducted and analyzed. The quality of the drawing processes is numerically analyzed by using an explicit incremental nonlinear finite element code. The minimum distance between elemental principal strains and the strain-based forming limit curve (FLC) is defined as tearing margin to be the key performance index (KPI) implying the quality of the part. The initial blank configuration has shown that it plays a highly important role in the quality of the product via the deep drawing process. In addition, it is observed that if a blank configuration is not greatly deviated from the one obtained from IA, the blank can still result a good product. The strain history around the bottom fillet of the part is also observed. The paper concludes that IA is an important part of the design methodology for deep drawing processes.

75 FR 59180 - Approval and Promulgation of Air Quality Implementation Plans; Maryland; Control Technique...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... Promulgation of Air Quality Implementation Plans; Maryland; Control Technique Guidelines for Paper, Film, and... Technique Guidelines (CTG) for paper, film, and foil coatings. These amendments will reduce volatile organic... Promulgation of Air Quality Implementation Plans; Maryland; Control Technique Guidelines for Paper, Film, and...

Precision Crystal Calorimeters in High Energy Physics

ScienceCinema

Ren-Yuan Zhu

2017-12-09

Precision crystal calorimeters traditionally play an important role in high energy physics experiments. In the last two decades, it faces a challenge to maintain its precision in a hostile radiation environment. This paper reviews the performance of crystal calorimeters constructed for high energy physics experiments and the progress achieved in understanding crystal’s radiation damage as well as in developing high quality scintillating crystals for particle physics. Potential applications of new generation scintillating crystals of high density and high light yield, such as LSO and LYSO, in particle physics experiments is also discussed.

Effect of Moisture Content of Paper Material on Laser Cutting

NASA Astrophysics Data System (ADS)

Stepanov, Alexander; Saukkonen, Esa; Piili, Heidi; Salminen, Antti

Laser technology has been used in industrial processes for several decades. The most advanced development and implementation took place in laser welding and cutting of metals in automotive and ship building industries. However, there is high potential to apply laser processing to other materials in various industrial fields. One of these potential fields could be paper industry to fulfill the demand for high quality, fast and reliable cutting technology. Difficulties in industrial application of laser cutting for paper industry are associated to lack of basic information, awareness of technology and its application possibilities. Nowadays possibilities of using laser cutting for paper materials are widened and high automation level of equipment has made this technology more interesting for manufacturing processes. Promising area of laser cutting application at paper making machines is longitudinal cutting of paper web (edge trimming). There are few locations at a paper making machine where edge trimming is usually done: wet press section, calender or rewinder. Paper web is characterized with different moisture content at different points of the paper making machine. The objective of this study was to investigate the effect of moisture content of paper material on laser cutting parameters. Effect of moisture content on cellulose fibers, laser absorption and energy needed for cutting is described as well. Laser cutting tests were carried out using CO2 laser.

Information, Advocacy and Signposting as a Low-Level Support for Adults with High-Functioning Autism Spectrum Disorder: An Example from the UK

ERIC Educational Resources Information Center

Southby, Kris; Robinson, Olivia

2018-01-01

"Low-level" support is championed to support adults with high functioning autism spectrum disorder (HFASD) to achieve good quality health and social care, yet research in the area is sparse. Drawing on semi-structured interview data, this paper considers the efficacy of an intervention to provide low-level support to adults with HFASD…

Mathematical model for prediction of efficiency indicators of educational activity in high school

NASA Astrophysics Data System (ADS)

Tikhonova, O. M.; Kushnikov, V. A.; Fominykh, D. S.; Rezchikov, A. F.; Ivashchenko, V. A.; Bogomolov, A. S.; Filimonyuk, L. Yu; Dolinina, O. N.; Kushnikov, O. V.; Shulga, T. E.; Tverdokhlebov, V. A.

2018-05-01

The quality of high school is a current problem all over the world. The paper presents the system dedicated to predicting the accreditation indicators of technical universities based on J. Forrester mechanism of system dynamics. The mathematical model is developed for prediction of efficiency indicators of the educational activity and is based on the apparatus of nonlinear differential equations.

Expanding the Possibilities of Discussion: A Strategic Approach to Using Online Discussion Boards in the Middle and High School English Classroom

ERIC Educational Resources Information Center

Ruday, Sean

2011-01-01

This paper focused on whether the use of online discussion boards can enhance the quality of interaction in the middle and high school English classroom, covering both the characteristics of online discussion boards and potential negative effects of their features. The features of online discussion boards, their effects, and how these boards…

High-Density, High-Resolution, Low-Cost Air Quality Sensor Networks for Urban Air Monitoring

NASA Astrophysics Data System (ADS)

Mead, M. I.; Popoola, O. A.; Stewart, G.; Bright, V.; Kaye, P.; Saffell, J.

2012-12-01

Monitoring air quality in highly granular environments such as urban areas which are spatially heterogeneous with variable emission sources, measurements need to be made at appropriate spatial and temporal scales. Current routine air quality monitoring networks generally are either composed of sparse expensive installations (incorporating e.g. chemiluminescence instruments) or higher density low time resolution systems (e.g. NO2 diffusion tubes). Either approach may not accurately capture important effects such as pollutant "hot spots" or adequately capture spatial (or temporal) variability. As a result, analysis based on data from traditional low spatial resolution networks, such as personal exposure, may be inaccurate. In this paper we present details of a sophisticated, low-cost, multi species (gas phase, speciated PM, meteorology) air quality measurement network methodology incorporating GPS and GPRS which has been developed for high resolution air quality measurements in urban areas. Sensor networks developed in the Centre for Atmospheric Science (University of Cambridge) incorporated electrochemical gas sensors configured for use in urban air quality studies operating at parts-per-billion (ppb) levels. It has been demonstrated that these sensors can be used to measure key air quality gases such as CO, NO and NO2 at the low ppb mixing ratios present in the urban environment (estimated detection limits <4ppb for CO and NO and <1ppb for NO2. Mead et al (submitted Aug., 2012)). Based on this work, a state of the art multi species instrument package for deployment in scalable sensor networks has been developed which has general applicability. This is currently being employed as part of a major 3 year UK program at London Heathrow airport (the Sensor Networks for Air Quality (SNAQ) Heathrow project). The main project outcome is the creation of a calibrated, high spatial and temporal resolution data set for O3, NO, NO2, SO2, CO, CO2, VOCstotal, size-speciated PM, temperature, relative humidity, wind speed and direction. The network incorporates existing GPRS infrastructures for real time sending of data with low overheads in terms of cost, effort and installation. In this paper we present data from the SNAQ Heathrow project as well as previous deployments showing measurement capability at the ppb level for NO, NO2 and CO. We show that variability can be observed and measured quantitatively using these sensor networks over widely differing time scales from individual emission events, diurnal variability associated with traffic and meteorological conditions, through to longer term synoptic weather conditions and seasonal behaviour. This work demonstrates a widely applicable generic capability to urban areas, airports as well as other complex emissions environments making this sensor system methodology valuable for scientific, policy and regulatory issues. We conclude that the low-cost high-density network philosophy has the potential to provide a more complete assessment of the high-granularity air quality structure generally observed in the environment. Further, when appropriately deployed, has the potential to offer a new paradigm in air quality quantification and monitoring.

Use of graph theory measures to identify errors in record linkage.

PubMed

Randall, Sean M; Boyd, James H; Ferrante, Anna M; Bauer, Jacqueline K; Semmens, James B

2014-07-01

Ensuring high linkage quality is important in many record linkage applications. Current methods for ensuring quality are manual and resource intensive. This paper seeks to determine the effectiveness of graph theory techniques in identifying record linkage errors. A range of graph theory techniques was applied to two linked datasets, with known truth sets. The ability of graph theory techniques to identify groups containing errors was compared to a widely used threshold setting technique. This methodology shows promise; however, further investigations into graph theory techniques are required. The development of more efficient and effective methods of improving linkage quality will result in higher quality datasets that can be delivered to researchers in shorter timeframes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Microstructural and Material Quality Effects on Rolling Contact Fatigue of Highly Elastic Intermetallic Ball Bearings

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Howard, S. Adam; Thomas, Fransua; Stanford, Malcolm K.

2016-01-01

Rolling element bearings made from highly-elastic intermetallic materials (HIM)s, such as 60NiTi, are under development for applications that require superior corrosion and shock resistance. Compared to steel, intermetallics have been shown to have much lower rolling contact fatigue (RCF) stress capability in simplified 3-ball on rod (ASTM STP 771) fatigue tests. In the 3-ball tests, poor material quality and microstructural flaws negatively affect fatigue life but such relationships have not been established for full-scale 60NiTi bearings. In this paper, 3-ball-on-rod fatigue behavior of two quality grades of 60NiTi are compared to the fatigue life of full-scale 50mm bore ball bearings made from the same materials. 60NiTi RCF rods with material or microstructural flaws suffered from infant mortality failures at all tested stress levels while high quality 60NiTi rods exhibited no failures at lower stress levels. Similarly, tests of full-scale bearings made from flawed materials exhibited early surface fatigue and through crack type failures while bearings made from high quality material did not fail even in long-term tests. Though the full-scale bearing test data is yet preliminary, the results suggest that the simplified RCF test is a good qualitative predictor of bearing performance. These results provide guidance for materials development and to establish minimum quality levels required for successful bearing operation and life.

Microstructural and Material Quality Effects on Rolling Contact Fatigue of Highly Elastic Intermetallic NiTi Ball Bearings

NASA Technical Reports Server (NTRS)

Dellacorte, Christopher; Howard, S. Adam; Thomas, Fransua; Stanford, Malcolm K.

2017-01-01

Rolling element bearings made from highly-elastic intermetallic materials (HIM)s, such as 60NiTi, are under development for applications that require superior corrosion and shock resistance. Compared to steel, intermetallics have been shown to have much lower rolling contact fatigue (RCF) stress capability in simplified 3-ball on rod (ASTM STP 771) fatigue tests. In the 3-ball tests, poor material quality and microstructural flaws negatively affect fatigue life but such relationships have not been established for full-scale 60NiTi bearings. In this paper, 3-ball-on-rod fatigue behavior of two quality grades of 60NiTi are compared to the fatigue life of full-scale 50mm bore ball bearings made from the same materials. 60NiTi RCF rods with material or microstructural flaws suffered from infant mortality failures at all tested stress levels while high quality 60NiTi rods exhibited no failures at lower stress levels. Similarly, tests of full-scale bearings made from flawed materials exhibited early surface fatigue and through crack type failures while bearings made from high quality material did not fail even in long-term tests. Though the full-scale bearing test data is yet preliminary, the results suggest that the simplified RCF test is a good qualitative predictor of bearing performance. These results provide guidance for materials development and to establish minimum quality levels required for successful bearing operation and life.

An Improved Power Quality BIBRED Converter-Based VSI-Fed BLDC Motor Drive

NASA Astrophysics Data System (ADS)

Singh, Bhim; Bist, Vashist

2014-01-01

This paper presents an IHQRR (integrated high-quality rectifier regulator) BIBRED (boost integrated buck rectifier energy storage DC-DC) converter-based VSI (voltage source inverter)-fed BLDC (brushless DC) motor drive. The speed control of BLDC motor is achieved by controlling the DC link voltage of the VSI using a single voltage sensor. This allows VSI to operate in fundamental frequency switching mode for electronic commutation of BLDC motor which reduces the switching losses due to high-frequency switching used in conventional approach of PWM (pulse width modulation)-based VSI-fed BLDC motor drive. A BIBRED converter is operated in a dual-DCM (discontinuous conduction mode) thus using a voltage follower approach for PFC (power factor correction) and DC link voltage control. The performance of the proposed drive is evaluated for improved power quality over a wide range of speed control and supply voltage variation for demonstrating the behavior of proposed drive. The power quality indices thus obtained are within the recommended limits by international PQ (power quality) standards such as IEC 61000-3-2.

Quantifying and predicting meat and meat products quality attributes using electromagnetic waves: an overview.

PubMed

Damez, Jean-Louis; Clerjon, Sylvie

2013-12-01

The meat industry needs reliable meat quality information throughout the production process in order to guarantee high-quality meat products for consumers. Besides laboratory researches, food scientists often try to adapt their tools to industrial conditions and easy handling devices useable on-line and in slaughterhouses already exist. This paper overviews the recently developed approaches and latest research efforts related to assessing the quality of different meat products by electromagnetic waves and examines the potential for their deployment. The main meat quality traits that can be assessed using electromagnetic waves are sensory characteristics, chemical composition, physicochemical properties, health-protecting properties, nutritional characteristics and safety. A wide range of techniques, from low frequency, high frequency impedance measurement, microwaves, NMR, IR and UV light, to X-ray interaction, involves a wide range of physical interactions between the electromagnetic wave and the sample. Some of these techniques are now in a period of transition between experimental and applied utilization and several sensors and instruments are reviewed. Copyright © 2013 Elsevier Ltd. All rights reserved.

Pathways to increase consumer trust in meat as a safe and wholesome food.

PubMed

Gellynck, Xavier; Verbeke, Wim; Vermeire, Bert

2006-09-01

This paper focuses on the effect of information about meat safety and wholesomeness on consumer trust based on several studies with data collected in Belgium. The research is grounded in the observation that despite the abundant rise of information through labelling, traceability systems and quality assurance schemes, the effect on consumer trust in meat as a safe and wholesome product is only limited. The overload and complexity of information on food products results in misunderstanding and misinterpretation. Functional traceability attributes such as organisational efficiency and chain monitoring are considered to be highly important but not as a basis for market segmentation. However, process traceability attributes such as origin and production method are of interest for particular market segments as a response to meat quality concerns. Quality assurance schemes and associated labels have a poor impact on consumers' perception. It is argued that the high interest of retailers in such schemes is driven by procurement management efficiency rather than safety or overall quality. Future research could concentrate on the distribution of costs and benefits associated with meat quality initiatives among the chain participants.

Argo workstation: a key component of operational oceanography

NASA Astrophysics Data System (ADS)

Dong, Mingmei; Xu, Shanshan; Miao, Qingsheng; Yue, Xinyang; Lu, Jiawei; Yang, Yang

2018-02-01

Operational oceanography requires the quantity, quality, and availability of data set and the timeliness and effectiveness of data products. Without steady and strong operational system supporting, operational oceanography will never be proceeded far. In this paper we describe an integrated platform named Argo Workstation. It operates as a data processing and management system, capable of data collection, automatic data quality control, visualized data check, statistical data search and data service. After it is set up, Argo workstation provides global high quality Argo data to users every day timely and effectively. It has not only played a key role in operational oceanography but also set up an example for operational system.

A Systematic Review of Studies Measuring and Reporting Hearing Aid Usage in Older Adults since 1999: A Descriptive Summary of Measurement Tools

PubMed Central

Perez, Elvira; Edmonds, Barrie A.

2012-01-01

Objective A systematic review was conducted to identify and quality assess how studies published since 1999 have measured and reported the usage of hearing aids in older adults. The relationship between usage and other dimensions of hearing aid outcome, age and hearing loss are summarised. Data sources Articles were identified through systematic searches in PubMed/MEDLINE, The University of Nottingham Online Catalogue, Web of Science and through reference checking. Study eligibility criteria: (1) participants aged fifty years or over with sensori-neural hearing loss, (2) provision of an air conduction hearing aid, (3) inclusion of hearing aid usage measure(s) and (4) published between 1999 and 2011. Results Of the initial 1933 papers obtained from the searches, a total of 64 were found eligible for review and were quality assessed on six dimensions: study design, choice of outcome instruments, level of reporting (usage, age, and audiometry) and cross validation of usage measures. Five papers were rated as being of high quality (scoring 10–12), 35 papers were rated as being of moderate quality (scoring 7–9), 22 as low quality (scoring 4–6) and two as very low quality (scoring 0–2). Fifteen different methods were identified for assessing the usage of hearing aids. Conclusions Generally, the usage data reviewed was not well specified. There was a lack of consistency and robustness in the way that usage of hearing aids was assessed and categorised. There is a need for more standardised level of reporting of hearing aid usage data to further understand the relationship between usage and hearing aid outcomes. PMID:22479312

75 FR 70289 - Certain Coated Paper Suitable For High-Quality Print Graphics Using Sheet-Fed Presses From China...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-17

... Indonesia Determinations On the basis of the record \\1\\ developed in the subject investigations, the United... China and Indonesia, provided for in subheadings 4810.14.11, 4810.14.19, 4810.14.20, 4810.14.50, 4810.14...

What We've Learned about Assessing Hands-On Science.

ERIC Educational Resources Information Center

Shavelson, Richard J.; Baxter, Gail P.

1992-01-01

A recent study compared hands-on scientific inquiry assessment to assessments involving lab notebooks, computer simulations, short-answer paper-and-pencil problems, and multiple-choice questions. Creating high quality performance assessments is a costly, time-consuming process requiring considerable scientific and technological know-how. Improved…

Filter Paper-based Nucleic Acid Storage in High-throughput Solid Tumor Genotyping.

PubMed

Stachler, Matthew; Jia, Yonghui; Sharaf, Nematullah; Wade, Jacqueline; Longtine, Janina; Garcia, Elizabeth; Sholl, Lynette M

2015-01-01

Molecular testing of tumors from formalin-fixed paraffin-embedded (FFPE) tissue blocks is central to clinical practice; however, it requires histology support and increases test turnaround time. Prospective fresh frozen tissue collection requires special handling, additional storage space, and may not be feasible for small specimens. Filter paper-based collection of tumor DNA reduces the need for histology support, requires little storage space, and preserves high-quality nucleic acid. We investigated the performance of tumor smears on filter paper in solid tumor genotyping, as compared with paired FFPE samples. Whatman FTA Micro Card (FTA preps) smears were prepared from 21 fresh tumor samples. A corresponding cytology smear was used to assess tumor cellularity and necrosis. DNA was isolated from FTA preps and FFPE core samples using automated methods and quantified using SYBR green dsDNA detection. Samples were genotyped for 471 mutations on a mass spectrophotometry-based platform (Sequenom). DNA concentrations from FTA preps and FFPE correlated for untreated carcinomas but not for mesenchymal tumors (Spearman σ=0.39 and σ=-0.1, respectively). Average DNA concentrations were lower from FTA preps as compared with FFPE, but DNA quality was higher with less fragmentation. Seventy-six percent of FTA preps and 86% of FFPE samples generated adequate DNA for genotyping. FTA preps tended to perform poorly for collection of DNA from pretreated carcinomas and mesenchymal neoplasms. Of the 16 paired DNA samples that were genotyped, 15 (94%) gave entirely concordant results. Filter paper-based sample preservation is a feasible alternative to FFPE for use in automated, high-throughput genotyping of carcinomas.

Contact and non-contact ultrasonic measurement in the food industry: a review

NASA Astrophysics Data System (ADS)

Taufiq Mohd Khairi, Mohd; Ibrahim, Sallehuddin; Yunus, Mohd Amri Md; Faramarzi, Mahdi

2016-01-01

The monitoring of the food manufacturing process is vital since it determines the safety and quality level of foods which directly affect the consumers’ health. Companies which produce high quality products will gain trust from consumers. This factor helps the companies to make profits. The use of efficient and appropriate sensors for the monitoring process can also reduce cost. The food assessing process based on an ultrasonic sensor has attracted the attention of the food industry due to its excellent capabilities in several applications. The utilization of low or high frequencies for the ultrasonic transducer has provided an enormous benefit for analysing, modifying and guaranteeing the quality of food. The contact and non-contact ultrasonic modes for measurement also contributed significantly to the food processing. This paper presents a review of the application of the contact and non-contact mode of ultrasonic measurement focusing on safety and quality control areas. The results from previous researches are shown and elaborated.

Subjective quality of video sequences rendered on LCD with local backlight dimming at different lighting conditions

NASA Astrophysics Data System (ADS)

Mantel, Claire; Korhonen, Jari; Pedersen, Jesper M.; Bech, Søren; Andersen, Jakob Dahl; Forchhammer, Søren

2015-01-01

This paper focuses on the influence of ambient light on the perceived quality of videos displayed on Liquid Crystal Display (LCD) with local backlight dimming. A subjective test assessing the quality of videos with two backlight dimming methods and three lighting conditions, i.e. no light, low light level (5 lux) and higher light level (60 lux) was organized to collect subjective data. Results show that participants prefer the method exploiting local dimming possibilities to the conventional full backlight but that this preference varies depending on the ambient light level. The clear preference for one method at the low light conditions decreases at the high ambient light, confirming that the ambient light significantly attenuates the perception of the leakage defect (light leaking through dark pixels). Results are also highly dependent on the content of the sequence, which can modulate the effect of the ambient light from having an important influence on the quality grades to no influence at all.

Energy Efficient Image/Video Data Transmission on Commercial Multi-Core Processors

PubMed Central

Lee, Sungju; Kim, Heegon; Chung, Yongwha; Park, Daihee

2012-01-01

In transmitting image/video data over Video Sensor Networks (VSNs), energy consumption must be minimized while maintaining high image/video quality. Although image/video compression is well known for its efficiency and usefulness in VSNs, the excessive costs associated with encoding computation and complexity still hinder its adoption for practical use. However, it is anticipated that high-performance handheld multi-core devices will be used as VSN processing nodes in the near future. In this paper, we propose a way to improve the energy efficiency of image and video compression with multi-core processors while maintaining the image/video quality. We improve the compression efficiency at the algorithmic level or derive the optimal parameters for the combination of a machine and compression based on the tradeoff between the energy consumption and the image/video quality. Based on experimental results, we confirm that the proposed approach can improve the energy efficiency of the straightforward approach by a factor of 2∼5 without compromising image/video quality. PMID:23202181

[E-Learning--an important contribution to general medical training and continuing education?].

PubMed

Ruf, D; Berner, M M; Kriston, L; Härter, M

2008-09-01

There is increasing activity in the development of e-learning modules for general medical training and continuing education. One of the central advantages of e-learning is flexibility regarding time and place of its use. The quality of the available e-learning opportunities varies quite considerably. For users it is often not easy to assess the quality of e-learning modules or to find offers of high quality. This could be a reason for the fact that despite the huge number of e-learning modules still only few students and physicians are using them. This is although e-learning has proven to be as effective as and even more efficient than learning in the classroom or with paper-based materials. This article summarizes the different models of e-learning, how and where to find offers of high quality, advantages of using e-learning, and the effectiveness and efficiency of such offers. In addition problems of e-learning and possibilities to overcome these problems are shown.

Effects of different drying methods on the product quality and volatile compounds of whole shiitake mushrooms.

PubMed

Tian, Yuting; Zhao, Yingting; Huang, Jijun; Zeng, Hongliang; Zheng, Baodong

2016-04-15

Various drying methods play important roles in the preservation of foods. However, how the different drying methods affect the quality of some foods is not clear. This paper evaluates the effects of hot air, vacuum, microwave, and microwave vacuum drying techniques on important qualities and volatile compounds of whole shiitake (Lentinus edodes) mushrooms. These four drying methods resulted in a significantly (p<0.05) increase in the content of total free amino acids and the relative content of sulfur compounds of dried products. Microwave vacuum drying helped to maintain larger amounts of taste-active amino acids, and improved nutrient retention and color attributes. Furthermore, the uniform honeycomb network created by microwave vacuum drying along with a less collapsed structure of dried samples can be used to explain the observed high rehydration ratio. Therefore, microwave vacuum drying should be a potential method for obtaining high-quality dried mushrooms. Copyright © 2015 Elsevier Ltd. All rights reserved.

Optimization of a micro-scale, high throughput process development tool and the demonstration of comparable process performance and product quality with biopharmaceutical manufacturing processes.

PubMed

Evans, Steven T; Stewart, Kevin D; Afdahl, Chris; Patel, Rohan; Newell, Kelcy J

2017-07-14

In this paper, we discuss the optimization and implementation of a high throughput process development (HTPD) tool that utilizes commercially available micro-liter sized column technology for the purification of multiple clinically significant monoclonal antibodies. Chromatographic profiles generated using this optimized tool are shown to overlay with comparable profiles from the conventional bench-scale and clinical manufacturing scale. Further, all product quality attributes measured are comparable across scales for the mAb purifications. In addition to supporting chromatography process development efforts (e.g., optimization screening), comparable product quality results at all scales makes this tool is an appropriate scale model to enable purification and product quality comparisons of HTPD bioreactors conditions. The ability to perform up to 8 chromatography purifications in parallel with reduced material requirements per run creates opportunities for gathering more process knowledge in less time. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

ATAD control goals through the analysis of process variables and evaluation of quality, production and cost.

PubMed

Nájera, S; Gil-Martínez, M; Zambrano, J A

2015-01-01

The aim of this paper is to establish and quantify different operational goals and control strategies in autothermal thermophilic aerobic digestion (ATAD). This technology appears as an alternative to conventional sludge digestion systems. During the batch-mode reaction, high temperatures promote sludge stabilization and pasteurization. The digester temperature is usually the only online, robust, measurable variable. The average temperature can be regulated by manipulating both the air injection and the sludge retention time. An improved performance of diverse biochemical variables can be achieved through proper manipulation of these inputs. However, a better quality of treated sludge usually implies major operating costs or a lower production rate. Thus, quality, production and cost indices are defined to quantify the outcomes of the treatment. Based on these, tradeoff control strategies are proposed and illustrated through some examples. This paper's results are relevant to guide plant operators, to design automatic control systems and to compare or evaluate the control performance on ATAD systems.

Image quality classification for DR screening using deep learning.

PubMed

FengLi Yu; Jing Sun; Annan Li; Jun Cheng; Cheng Wan; Jiang Liu

2017-07-01

The quality of input images significantly affects the outcome of automated diabetic retinopathy (DR) screening systems. Unlike the previous methods that only consider simple low-level features such as hand-crafted geometric and structural features, in this paper we propose a novel method for retinal image quality classification (IQC) that performs computational algorithms imitating the working of the human visual system. The proposed algorithm combines unsupervised features from saliency map and supervised features coming from convolutional neural networks (CNN), which are fed to an SVM to automatically detect high quality vs poor quality retinal fundus images. We demonstrate the superior performance of our proposed algorithm on a large retinal fundus image dataset and the method could achieve higher accuracy than other methods. Although retinal images are used in this study, the methodology is applicable to the image quality assessment and enhancement of other types of medical images.

Methodological quality assessment of paper-based systematic reviews published in oral health.

PubMed

Wasiak, J; Shen, A Y; Tan, H B; Mahar, R; Kan, G; Khoo, W R; Faggion, C M

2016-04-01

This study aimed to conduct a methodological assessment of paper-based systematic reviews (SR) published in oral health using a validated checklist. A secondary objective was to explore temporal trends on methodological quality. Two electronic databases (OVID Medline and OVID EMBASE) were searched for paper-based SR of interventions published in oral health from inception to October 2014. Manual searches of the reference lists of paper-based SR were also conducted. Methodological quality of included paper-based SR was assessed using an 11-item questionnaire, Assessment of Multiple Systematic Reviews (AMSTAR) checklist. Methodological quality was summarized using the median and inter-quartile range (IQR) of the AMSTAR score over different categories and time periods. A total of 643 paper-based SR were included. The overall median AMSTAR score was 4 (IQR 2-6). The highest median score (5) was found in the pain dentistry and periodontology fields, while the lowest median score (3) was found in implant dentistry, restorative dentistry, oral medicine, and prosthodontics. The number of paper-based SR per year and the median AMSTAR score increased over time (median score in 1990s was 2 (IQR 2-3), 2000s was 4 (IQR 2-5), and 2010 onwards was 5 (IQR 3-6)). Although the methodological quality of paper-based SR published in oral health has improved in the last few years, there is still scope for improving quality in most evaluated dental specialties. Large-scale assessment of methodological quality of dental SR highlights areas of methodological strengths and weaknesses that can be targeted in future publications to encourage better quality review methodology.

Image resolution enhancement via image restoration using neural network

NASA Astrophysics Data System (ADS)

Zhang, Shuangteng; Lu, Yihong

2011-04-01

Image super-resolution aims to obtain a high-quality image at a resolution that is higher than that of the original coarse one. This paper presents a new neural network-based method for image super-resolution. In this technique, the super-resolution is considered as an inverse problem. An observation model that closely follows the physical image acquisition process is established to solve the problem. Based on this model, a cost function is created and minimized by a Hopfield neural network to produce high-resolution images from the corresponding low-resolution ones. Not like some other single frame super-resolution techniques, this technique takes into consideration point spread function blurring as well as additive noise and therefore generates high-resolution images with more preserved or restored image details. Experimental results demonstrate that the high-resolution images obtained by this technique have a very high quality in terms of PSNR and visually look more pleasant.

New educational tools to encourage high-school students' activity in stem

NASA Astrophysics Data System (ADS)

Mayorova, Vera; Grishko, Dmitriy; Leonov, Victor

2018-01-01

Many students have to choose their future profession during their last years in the high school and therefore to choose a university where they will get proper education. That choice may define their professional life for many years ahead or probably for the rest of their lives. Bauman Moscow State Technical University conducts various events to introduce future professions to high-school students. Such activity helps them to pick specialization in line with their interests and motivates them to study key scientific subjects. The paper focuses on newly developed educational tools to encourage high school students' interest in STEM disciplines. These tools include laboratory courses developed in the fields of physics, information technologies and mathematics. More than 2000 high school students already participated in these experimental courses. These activities are aimed at increasing the quality of STEM disciplines learning which will result in higher quality of training of future engineers.

Continuous-tone applications in digital hard-copy output devices

NASA Astrophysics Data System (ADS)

Saunders, Jeffrey C.

1990-11-01

Dye diffusion technology has made a recent entry into the hardcopy printer arena making it now possible to achieve near-photographic quality images from digital raster image data. Whereas the majority of low cost printers utilizing ink-jet, thermal wax, or dotmatrix technologies advertise high resolution printheads, the restrictions which dithering algorithms apply to these inherently binary printing systems force them to sacrifice spatial resolution capability for tone scale reproduction. Dye diffusion technology allows a fully continuous range of density at each pixel location thus preserving the full spatial resolution capability of the printhead; spatial resolution is not sacrificed for tone scale. This results in images whose quality is far superior to the ink-jet or wax-transfer products; image quality so high in fact, to the unaided eye, dye diffusion images are indistinguishable from their silver-halide counterparts. Eastman Kodak Co. offers a highly refined application of dye diffusion technology in the Kodak XL 7700 Digital Continuous Tone Printer and Kodak EKTATHERM media products. The XL . 7700 Printer represents a serious alternative to expensive laser-based film recorders for applications which require high quality image output from digital data files. This paper presents an explanation of dye diffusion printing, what distinguishes it from other technologies, sensitometric control and image quality parameters, and applications within the industry, particularly that of Airborne Reconnaissance and Remote Sensing.

Assessment of shrimp farming impact on groundwater quality using analytical hierarchy process

NASA Astrophysics Data System (ADS)

Anggie, Bernadietta; Subiyanto, Arief, Ulfah Mediaty; Djuniadi

2018-03-01

Improved shrimp farming affects the groundwater quality conditions. Assessment of shrimp farming impact on groundwater quality conventionally has less accuracy. This paper presents the implementation of Analytical Hierarchy Process (AHP) method for assessing shrimp farming impact on groundwater quality. The data used is the impact data of shrimp farming in one of the regions in Indonesia from 2006-2016. Criteria used in this study were 8 criteria and divided into 49 sub-criteria. The weighting by AHP performed to determine the importance level of criteria and sub-criteria. Final priority class of shrimp farming impact were obtained from the calculation of criteria's and sub-criteria's weights. The validation was done by comparing priority class of shrimp farming impact and water quality conditions. The result show that 50% of the total area was moderate priority class, 37% was low priority class and 13% was high priority class. From the validation result impact assessment for shrimp farming has been high accuracy to the groundwater quality conditions. This study shows that assessment based on AHP has a higher accuracy to shrimp farming impact and can be used as the basic fisheries planning to deal with impacts that have been generated.

Analysis Of Provided Service Quality In Flowers And Living Plants Transport

NASA Astrophysics Data System (ADS)

Poliaková, Adela

2015-06-01

This paper analyses quality of the living flowers and plants transportation. A part of this paper compares the demands for a particular transport mode and a practical demonstration of these transport modes within a specific transport mode. The paper presents a survey of quality of services provided by individual transport modes.

Data Quality for Situational Awareness during Mass-Casualty Events

PubMed Central

Demchak, Barry; Griswold, William G.; Lenert, Leslie A.

2007-01-01

Incident Command systems often achieve situational awareness through manual paper-tracking systems. Such systems often produce high latencies and incomplete data, resulting in inefficient and ineffective resource deployment. WIISARD (Wireless Internet Information System for Medical Response in Disasters) collects much more data than a paper-based system, dramatically reducing latency while increasing the kinds and quality of information available to incident commanders. Yet, the introduction of IT into a disaster setting is not problem-free. Notably, system component failures can delay the delivery of data. The type and extent of a failure can have varying effects on the usefulness of information displays. We describe a small, coherent set of customizble information overlays to address this problem, and we discuss reactions to these displays by medical commanders. PMID:18693821

Activating the knowledge-to-action cycle for geriatric care in India

PubMed Central

2011-01-01

Despite a rapidly aging population, geriatrics - the branch of medicine that focuses on healthcare of the elderly - is relatively new in India, with many practicing physicians having little knowledge of the clinical and functional implications of aging. Negative attitudes and limited awareness, knowledge or acceptance of geriatrics as a legitimate discipline contribute to inaccessible and poor quality care for India's old. The aim of this paper is to argue that knowledge translation is a potentially effective tool for engaging Indian healthcare providers in the delivery of high quality geriatric care. The paper describes India's context, including demographics, challenges and current policies, summarizes evidence on provider behaviour change, and integrates the two in order to propose an action plan for promoting improvements in geriatric care. PMID:22136552

Image Quality Assessment of High-Resolution Satellite Images with Mtf-Based Fuzzy Comprehensive Evaluation Method

NASA Astrophysics Data System (ADS)

Wu, Z.; Luo, Z.; Zhang, Y.; Guo, F.; He, L.

2018-04-01

A Modulation Transfer Function (MTF)-based fuzzy comprehensive evaluation method was proposed in this paper for the purpose of evaluating high-resolution satellite image quality. To establish the factor set, two MTF features and seven radiant features were extracted from the knife-edge region of image patch, which included Nyquist, MTF0.5, entropy, peak signal to noise ratio (PSNR), average difference, edge intensity, average gradient, contrast and ground spatial distance (GSD). After analyzing the statistical distribution of above features, a fuzzy evaluation threshold table and fuzzy evaluation membership functions was established. The experiments for comprehensive quality assessment of different natural and artificial objects was done with GF2 image patches. The results showed that the calibration field image has the highest quality scores. The water image has closest image quality to the calibration field, quality of building image is a little poor than water image, but much higher than farmland image. In order to test the influence of different features on quality evaluation, the experiment with different weights were tested on GF2 and SPOT7 images. The results showed that different weights correspond different evaluating effectiveness. In the case of setting up the weights of edge features and GSD, the image quality of GF2 is better than SPOT7. However, when setting MTF and PSNR as main factor, the image quality of SPOT7 is better than GF2.

The Effect of Number and Presentation Order of High-Constraint Sentences on Second Language Word Learning.

PubMed

Ma, Tengfei; Chen, Ran; Dunlap, Susan; Chen, Baoguo

2016-01-01

This paper presents the results of an experiment that investigated the effects of number and presentation order of high-constraint sentences on semantic processing of unknown second language (L2) words (pseudowords) through reading. All participants were Chinese native speakers who learned English as a foreign language. In the experiment, sentence constraint and order of different constraint sentences were manipulated in English sentences, as well as L2 proficiency level of participants. We found that the number of high-constraint sentences was supportive for L2 word learning except in the condition in which high-constraint exposure was presented first. Moreover, when the number of high-constraint sentences was the same, learning was significantly better when the first exposure was a high-constraint exposure. And no proficiency level effects were found. Our results provided direct evidence that L2 word learning benefited from high quality language input and first presentations of high quality language input.

Quality Assurance for University Teaching.

ERIC Educational Resources Information Center

Ellis, Roger, Ed.

This book, written from a British perspective, presents 17 papers on quality assurance in teaching at the university level. The first eight papers address issues of assuring quality and include: (1) "Quality Assurance for University Teaching; Issues and Approaches" (Roger Ellis); (2) "A British Standard for University…

Mind-to-paper is an effective method for scientific writing.

PubMed

Rosenberg, Jacob; Burcharth, Jakob; Pommergaard, Hans Christian; Danielsen, Anne Kjærgaard

2013-03-01

The problem of initiating the writing process is a well-known phenomenon, especially for young and inexperienced scientists. The purpose of this paper is to present an effective method to overcome this problem and increase writing efficiency among inexperienced scientists. Twelve young scientists within the medical/surgical fields were introduced to the mind-to-paper concept. The first and last article drafts produced by each of the scientists were scored for language complexity (LIX number, Flesch Reading Ease Scale and Gunning Fog), flow, structure, length and use of references; and the results were compared. All participants produced one full article draft during each of the three dictation days. When comparing the first and last article draft regarding time used, no significant difference was detected. In general, the manuscripts were of high quality on all evaluated parameters, but language complexity had increased in the final manuscript. Mind-to-paper dictation for scientific writing is an effective method for production of scientific papers of good initial quality, even when used for the first time by inexperienced scientists. We conclude that practicing this concept produces papers of an adequate language complexity, and that dictation as a writing tool allows for fast transfer of ideas and thoughts to written text. not relevant. not relevant.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bodnarczuk, M.

How does one assure that both quality and creativity are obtained in basic research environments QA theoreticians have attempted to develop workable definitions of quality, but in more reflective moments, these definitions often fail to capture the deeper essence of the idea of quality.'' This paper asserts that creativity (as a product of the human mind) is a concrete interface between perfunctory definitions of quality (conformance to specifications) and more philosophical speculations about the nature of quality- related ultimates'' like elegance or beauty. In addition, we describe the distinction between creative ideas and creative acts and highlight one of themore » major inhibitors of creativity, fear. Finally we show that highly creative people often have an irreverent attitude toward boundaries and established authority, and discuss how one can allow for this when designing a QA program in a basic research environment.« less

Measuring the quality of junior hospital doctors in general medicine.

PubMed

Jones, J M; Sanderson, C F; Black, N A

1992-05-01

During the course of a larger study aimed at relating staffing levels of junior doctors in general medicine to the safety of the care provided, it became clear that consultant doctors considered the quality of their junior staff as being at least as important as the quantity. This paper describes several attempts to develop a feasible and valid method of measuring the quality of senior house officers (SHOs) and registrars using routinely available data. Having rejected three methods and had difficulties with three other methods, a modified Delphi survey was used to explore the extent to which consultants agreed on the key attributes of a high quality SHO or registrar. Sixty-seven (60%) of all consultants in the South-West Thames and Trent regions responded to two rounds of questionnaires which revealed communication skills as being consistently the most significant factor. This was confirmed in a second, anonymous survey of 198 (78%) SHO and registrar posts in the North-West Thames region. It also became clear that consultants viewed the quality of their own SHOs and registrars as generally high. This being so it is argued that the requirement to adjust for quality, when comparing SHO and registrar levels between hospitals, is of minor importance. These results also suggest that the explicit teaching of communication skills should have a high priority in undergraduate and postgraduate education.

A further study to investigate the detection and enhancement of latent fingerprints using visible absorption and luminescence chemical imaging.

PubMed

Payne, Gemma; Reedy, Brian; Lennard, Chris; Comber, Bruce; Exline, David; Roux, Claude

2005-05-28

This study investigated the application of chemical imaging to the detection of latent fingerprints using the Condor macroscopic chemical imaging system (ChemImage Corp., Pittsburgh, USA). Methods were developed and optimised for the visualisation of untreated latent fingerprints and fingerprints processed with DFO, ninhydrin, cyanoacrylate, and cyanoacrylate plus rhodamine 6G stain. The results obtained with chemical imaging were compared to the detection achieved using conventional imaging techniques. The Condor significantly improved the detection of many prints, especially those that might be considered poor quality or borderline prints. Prints on newspaper treated with ninhydrin and DFO, and prints on white and yellow paper treated with ninhydrin, benefited the most from chemical imaging detection. In many cases, fingerprints undetectable using conventional imaging techniques could be visualised with chemical imaging. Ridge detail from untreated prints on yellow paper was also detected using the Condor. When prints of high quality were examined, both detection techniques produced quality results. The results of this project demonstrate that chemical imaging offers advantages over conventional visualisation techniques when examining latent fingerprints, especially those that would be considered difficult, such as weak prints or prints on surfaces that produce highly luminescent backgrounds. Standard testing procedures for the detection and enhancement of fingerprints by chemical imaging are presented and discussed.

Wavelength dependency in high power laser cutting and welding

NASA Astrophysics Data System (ADS)

Havrilla, David; Ziermann, Stephan; Holzer, Marco

2012-03-01

Laser cutting and welding have been around for more than 30 years. Within those three decades there has never been a greater variety of high power laser types and wavelengths to choose from than there is today. There are many considerations when choosing the right laser for any given application - capital investment, cost of ownership, footprint, serviceability, along with a myriad of other commercial & economic considerations. However, one of the most fundamental questions that must be asked and answered is this - "what type of laser is best suited for the application?". Manufacturers and users alike are realizing what, in retrospect, may seem obvious - there is no such thing as a universal laser. In many cases there is one laser type and wavelength that clearly provides the highest quality application results. This paper will examine the application fields of high power, high brightness 10.6 & 1 micron laser welding & cutting and will provide guidelines for selecting the laser that is best suited for the application. Processing speed & edge quality serve as key criteria for cutting. Whereas speed, seam quality & spatter ejection provide the paradigm for welding.

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels

PubMed Central

Zhang, Chenchu; Hu, Yanlei; Du, Wenqiang; Wu, Peichao; Rao, Shenglong; Cai, Ze; Lao, Zhaoxin; Xu, Bing; Ni, Jincheng; Li, Jiawen; Zhao, Gang; Wu, Dong; Chu, Jiaru; Sugioka, Koji

2016-01-01

Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices. PMID:27619690

Defining quality health care with outcomes assessment while achieving economic value.

PubMed

Shaw, L J; Miller, D D

2000-02-01

The effectiveness of a procedure is increasingly guided by the evaluation of patient outcomes. Outcomes data is used to develop clinical pathways of care and to define appropriate resource-use levels without sacrificing quality of care. Integration of the economic implications of medical services into an outcome-based guideline allows for the development of disease-management strategies. In cardiovascular medicine, risk reduction is associated with high cost due to the "pay-back" of new technologies and therapies. A major challenge is to define a balance between "high tech" care and cost. This paper devises an outpatient evidence-based guideline using clinical and economic outcomes data for the diagnosis of coronary disease.

Piezoelectric micromachined ultrasonic transducers with low thermoelastic dissipation and high quality factor

NASA Astrophysics Data System (ADS)

Chen, Xuying; Liu, Xinxin; Wang, Tao; Le, Xianhao; Ma, Fangyi; Lee, Chengkuo; Xie, Jin

2018-05-01

Thermoelastic dissipation is one of the main dissipative mechanisms in piezoelectric micromachined ultrasonic transducers (pMUTs). In this paper, we firstly propose pMUTs with etching holes to decrease thermoelastic dissipation and enhance quality factor (Q). The etching holes effectively disturb heat flow, and thus reduce thermoelastic loss. Working mechanism based on the Zener’s model is interpreted. The experiment results show that the Q of pMUT with three rows of holes is increased by 139% from 2050 to 4909 compared with the traditional one. Temperature coefficient of frequency (TCF) and vibration performance are also improved. The enhanced pMUT can be widely used in measurement of Doppler shift and relative high power applications.

Evaluating alternative service contracts for medical equipment.

PubMed

De Vivo, L; Derrico, P; Tomaiuolo, D; Capussotto, C; Reali, A

2004-01-01

Managing medical equipments is a formidable task that has to be pursued maximizing the benefits within a highly regulated and cost-constrained environment. Clinical engineers are uniquely equipped to determine which policies are the most efficacious and cost effective for a health care institution to ensure that medical devices meet appropriate standards of safety, quality and performance. Part of this support is a strategy for preventive and corrective maintenance. This paper describes an alternative scheme of OEM (Original Equipment Manufacturer) service contract for medical equipment that combines manufacturers' technical support and in-house maintenance. An efficient and efficacious organization can reduce the high cost of medical equipment maintenance while raising reliability and quality. Methodology and results are discussed.

Filter methods to preserve local contrast and to avoid artifacts in gamut mapping

NASA Astrophysics Data System (ADS)

Meili, Marcel; Küpper, Dennis; Barańczuk, Zofia; Caluori, Ursina; Simon, Klaus

2010-01-01

Contrary to high dynamic range imaging, the preservation of details and the avoidance of artifacts is not explicitly considered in popular color management systems. An effective way to overcome these difficulties is image filtering. In this paper we investigate several image filter concepts for detail preservation as part of a practical gamut mapping strategy. In particular we define four concepts including various image filters and check their performance with a psycho-visual test. Additionally, we compare our performance evaluation to two image quality measures with emphasis on local contrast. Surprisingly, the most simple filter concept performs highly efficient and achieves an image quality which is comparable to the more established but slower methods.

FSO and quality of service software prediction

NASA Astrophysics Data System (ADS)

Bouchet, O.; Marquis, T.; Chabane, M.; Alnaboulsi, M.; Sizun, H.

2005-08-01

Free-space optical (FSO) communication links constitute an alternative option to radio relay links and to optical cables facing growth needs in high-speed telecommunications (abundance of unregulated bandwidth, rapid installation, availability of low-cost optical components offering a high data rate, etc). Their operationalisation requires a good knowledge of the atmospheric effects which can negatively affect role propagation and the availability of the link, and thus to the quality of service (QoS). Better control of these phenomena will allow for the evaluation of system performance and thus assist with improving reliability. The aim of this paper is to compare the behavior of a FSO link located in south of France (Toulouse: with the following parameters: around 270 meters (0.2 mile) long, 34 Mbps data rate, 850 nm wavelength and PDH frame) with airport meteorological data. The second aim of the paper is to assess in-house FSO quality of service prediction software, through comparing simulations with the optical link data and the weather data. The analysis uses in-house software FSO quality of service prediction software ("FSO Prediction") developed by France Telecom Research & Development, which integrates news fog fading equations (compare to Kim & al.) and includes multiple effects (geometrical attenuation, atmospheric fading, rain, snow, scintillation and refraction attenuation due to atmospheric turbulence, optical mispointing attenuation). The FSO link field trial, intended to enable the demonstration and evaluation of these different effects, is described; and preliminary results of the field trial, from December 2004 to May 2005, are then presented.

Laser-based rework in electronics production

NASA Astrophysics Data System (ADS)

Albert, Florian; Mys, Ihor; Schmidt, Michael

2007-02-01

Despite the electronic manufacturing is well-established mass production process for a long time, the problem of reworking, i.a. reject and replace of defect components, still exists. The rework operations (soldering, replacement and desoldering) are performed in most cases manually. However, this practice is characterized by an inconsistent quality of the reworked solder joints and a high degree of physiological stress for the employees. In this paper, we propose a novel full-automated laser based soldering and rework process. Our developed soldering system is a pick-and-place unit with an integrated galvanometer scanner, a fiber coupled diode laser for quasi-simultaneous soldering and a pyrometer-based process control. The developed system provides soldering and reworking processes taking into account a kind of defect, a type of electronic component and quality requirements from the IPC- 610 norm. The paper spends a great deal of efforts to analyze quality of laser reworked solder joints. The quality depends mainly on the type and thickness of intermetallic phases between solder, pads and leads; the wetting angles between pad, solder and lead; and finally, the joint microstructure with its mechanical properties. The influence of the rework soldering on these three factors is discussed and compared to conventional laser soldering results. In order to optimize the quality of reworked joints, the different strategies of energy input are applied.

Evaluation of High-Angle-of-Attack Handling Qualities for the X-31A Using Standard Evaluation Maneuvers

NASA Technical Reports Server (NTRS)

Stoliker, Patrick C.; Bosworth, John T.

1996-01-01

The X-31A aircraft gross-acquisition and fine-tracking handling qualities have been evaluated using standard evaluation maneuvers developed by Wright Laboratory, Wright-Patterson Air Force Base. The emphasis of the testing is in the angle-of-attack range between 30 deg and 70 deg. Longitudinal gross-acquisition handling qualities results show borderline Level 1/Level 2 performance. Lateral gross-acquisition testing results in Level 1/Level 2 ratings below 45 deg angle of attack, degrading into Level 3 as angle of attack increases. The fine-tracking performance in both longitudinal and lateral axes also receives Level 1 ratings near 30 deg angle of attack, with the ratings tending towards Level 3 at angles of attack greater than 50 deg. These ratings do not match the expectations from the extensive close-in combat testing where the X-31A aircraft demonstrated fair to good handling qualities maneuvering for high angles of attack. This paper presents the results of the high-angle-of-attack handling qualities flight testing of the X-31A aircraft. Discussion of the preparation for the maneuvers, the pilot ratings, and selected pilot comments are included. Evaluation of the results is made in conjunction with existing Neal-Smith, bandwidth, Smith-Geddes, and military specifications.

Evaluation of High-Angle-of-Attack Handling Qualities for the X-31A Using Standard Evaluation Maneuvers

NASA Technical Reports Server (NTRS)

Stoliker, Patrick C.; Bosworth, John T.

1997-01-01

The X-31A aircraft gross-acquisition and fine-tracking handling qualities have been evaluated using standard evaluation maneuvers developed by Wright Laboratory, Wright Patterson Air Force Base. The emphasis of the testing is in the angle-of-attack range between 30 deg. and 70 deg. Longitudinal gross-acquisition handling qualities results show borderline Level l/Level 2 performance. Lateral gross-acquisition testing results in Level l/Level 2 ratings below 45 deg. angle of attack, degrading into Level 3 as angle of attack increases. The fine tracking performance in both longitudinal and lateral axes also receives Level 1 ratings near 30 deg. angle of attack, with the ratings tending towards Level 3 at angles of attack greater than 50 deg. These ratings do not match the expectations from the extensive close-in combat testing where the X-31A aircraft demonstrated fair to good handling qualities maneuvering for high angles of attack. This paper presents the results of the high-angle-of-attack handling qualities flight testing of the X-31A aircraft. Discussion of the preparation for the maneuvers, the pilot ratings, and selected pilot comments are included. Evaluation of the results is made in conjunction with existing Neal Smith, bandwidth, Smith-Geddes, and military specifications.

Advanced fabrication of Si nanowire FET structures by means of a parallel approach.

PubMed

Li, J; Pud, S; Mayer, D; Vitusevich, S

2014-07-11

In this paper we present fabricated Si nanowires (NWs) of different dimensions with enhanced electrical characteristics. The parallel fabrication process is based on nanoimprint lithography using high-quality molds, which facilitates the realization of 50 nm-wide NW field-effect transistors (FETs). The imprint molds were fabricated by using a wet chemical anisotropic etching process. The wet chemical etch results in well-defined vertical sidewalls with edge roughness (3σ) as small as 2 nm, which is about four times better compared with the roughness usually obtained for reactive-ion etching molds. The quality of the mold was studied using atomic force microscopy and scanning electron microscopy image data. The use of the high-quality mold leads to almost 100% yield during fabrication of Si NW FETs as well as to an exceptional quality of the surfaces of the devices produced. To characterize the Si NW FETs, we used noise spectroscopy as a powerful method for evaluating device performance and the reliability of structures with nanoscale dimensions. The Hooge parameter of fabricated FET structures exhibits an average value of 1.6 × 10(-3). This value reflects the high quality of Si NW FETs fabricated by means of a parallel approach that uses a nanoimprint mold and cost-efficient technology.

To the theory of high-power gyrotrons with uptapered resonators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dumbrajs, O.; Nusinovich, G. S.

In high-power gyrotrons it is desirable to combine an optimal resonator length with the optimal value of the resonator quality factor. In resonators with the constant radius of the central part, the possibilities of this combination are limited because the quality factor of the resonator sharply increases with its length. Therefore the attempts to increase the length for maximizing the efficiency leads to such increase in the quality factor which makes the optimal current too small. Resonators with slightly uptapered profiles offer more flexibility in this regard. In such resonators, one can separate optimization of the interaction length from optimizationmore » of the quality factor because the quality factor determined by diffractive losses can be reduced by increasing the angle of uptapering. In the present paper, these issues are analyzed by studying as a typical high-power 17 GHz gyrotron which is currently under development in Europe for ITER (http://en.wikipedia.org/wiki/ITER). The effect of a slight uptapering of the resonator wall on the efficiency enhancement and the purity of the radiation spectrum in the process of the gyrotron start-up and power modulation are studied. Results show that optimal modification of the shape of a slightly uptapered resonator may result in increasing the gyrotron power from 1052 to 1360 kW.« less

Aerodynamic and engineering design of a 1.5 s high quality microgravity drop tower facility

NASA Astrophysics Data System (ADS)

Belser, Valentin; Breuninger, Jakob; Reilly, Matthew; Laufer, René; Dropmann, Michael; Herdrich, Georg; Hyde, Truell; Röser, Hans-Peter; Fasoulas, Stefanos

2016-12-01

Microgravity experiments are essential for research in space science, biology, fluid mechanics, combustion, and material sciences. One way to conduct microgravity experiments on Earth is by using drop tower facilities. These facilities combine a high quality of microgravity, adequate payload masses and have the advantage of virtually unlimited repeatability under same experimental conditions, at a low cost. In a collaboration between the Institute of Space Systems (IRS) at the University of Stuttgart and Baylor University (BU) in Waco, Texas, a new drop tower is currently under development at the Center for Astrophysics, Space Physics and Engineering Research (CASPER). The design parameters of the drop tower ask for at least 1.5 s in free fall duration while providing a quality of at least 10-5 g. Previously, this quality has only been achieved in vacuum drop tower facilities where the capsule experiences virtually zero aerodynamic drag during its free fall. Since this design comes at high costs, a different drop tower design concept, which does not require an evacuated drop shaft, was chosen. It features a dual-capsule system in which the experiment capsule is shielded from aerodynamic forces by surrounding it with a drag shield during the drop. As no other dual-capsule drop tower has been able to achieve a quality as good as or better than 10-5 g previous work optimized the design with an aerodynamic perspective by using computational fluid dynamics (CFD) simulations to determine the ideal shape and size of the outer capsule and to specify the aerodynamically crucial dimensions for the overall system. Experiments later demonstrated that the required quality of microgravity can be met with the proposed design. The main focus of this paper is the mechanical realization of the capsule as well as the development and layout of the surrounding components, such as the release mechanism, the deceleration device and the drop shaft. Because the drop tower facility is a complex system with many interdependencies between all of the components, several engineering challenges had to be addressed. For example, initial disturbances that are caused by the release mechanism are a common issue that arises at drop tower facilities. These vibrations may decrease the quality of microgravity during the initial segment of free fall. Because this would reduce the free fall time experiencing high quality microgravity, a mechanism has been developed to provide a soft release. Challenges and proposed solutions for all components are highlighted in this paper.

Discourse-Centric Learning Analytics: Mapping the Terrain

ERIC Educational Resources Information Center

Knight, Simon; Littleton, Karen

2015-01-01

There is an increasing interest in developing learning analytic techniques for the analysis, and support of, high-quality learning discourse. This paper maps the terrain of discourse-centric learning analytics (DCLA), outlining the distinctive contribution of DCLA and outlining a definition for the field moving forwards. It is our claim that DCLA…

Optimization of composite wood structural components : processing and design choices

Treesearch

Theodore L. Laufenberg

1985-01-01

Decreasing size and quality of the world's forest resources are responsible for interest in producing composite wood structural components. Process and design optimization methods are offered in this paper. Processing concepts for wood composite structural products are reviewed to illustrate manufacturing boundaries and areas of high potential. Structural...

A Research Review of Nurse Teachers' Competencies

ERIC Educational Resources Information Center

Zlatanovic, Tatjana; Havnes, Anton; Mausethagen, Sølvi

2017-01-01

The conceptions of what constitutes nursing competence and how such competence is taught and learned are changing, due to rapid changes in in the health sector. Nurse teachers' competencies for providing high-quality, up-to-date nursing education, are developing accordingly. This paper reviews the existing research on nurse teachers' competencies…

Practices and Experiences on Bilingual Teaching

ERIC Educational Resources Information Center

Liu, Guang-rong; Ye, Chun-song; Jiang, Hua

2007-01-01

The implementation of bilingual teaching is specialized course in one of the important teaching reforms and it is also the inevitable trend in cultivating talents with high quality. In the paper, several problems of currently restricting the method are pointed out in China and experiences on bilingual teaching of "fundamentals of water…

Toward a Quality-of-Life Paradigm for Sustainable Communities.

ERIC Educational Resources Information Center

Hyman, Drew

This paper suggests that current paradigms and world views guiding research for social action are inadequate for directing rural community change in a high-tech, global community. For several generations, the agrarian and industrial paradigms have been accepted as appropriate for guiding social change and development. However, there are problems…

Investigating an Open Methodology for Designing Domain-Specific Language Collections

ERIC Educational Resources Information Center

Fitzgerald, Alannah; Wu, Shaoqun; Barge, Martin

2014-01-01

With this research and design paper, we are proposing that Open Educational Resources (OERs) and Open Access (OA) publications give increasing access to high quality online educational and research content for the development of powerful domain-specific language collections that can be further enhanced linguistically with the Flexible Language…

Playgrounds for Infants, Toddlers, and Preschoolers.

ERIC Educational Resources Information Center

Frost, Joe L.; Dempsey, James D.

This paper offers practical assistance for the development of high quality playgrounds for infants, toddlers, and preschoolers in child care. Discussion of the value of play in child development and the benefits of outdoor play is followed by a consideration of the ways children use playgrounds in exercise, construction, group and dramatic forms…

Developing a Culture of Readers: Complementary Materials That Engage

ERIC Educational Resources Information Center

Sailors, Misty; Kaambankadzanja, Davie

2017-01-01

Many professionals, including members of the International Literacy Association, are concerned with the lack of reading materials in classrooms across the world. In this paper, the authors present the creation of high-quality, locally produced, complementary reading materials in Malawi, where there are very few children's books and few…

The Performing School: The Effects of Market & Accountability Policies

ERIC Educational Resources Information Center

Falabella, Alejandra

2014-01-01

Market and accountability educational reforms have proliferated around the globe, along with high expectations of solving countries' school quality deficits and inequities. In this paper I develop an analytical framework from a critical sociology angle for analyzing the effects of these policies within schools. First I discuss conceptually the…

Are Elementary Teacher Education Programs the Real Problem of Unqualified Teachers?

ERIC Educational Resources Information Center

Weitman, Catheryn J.; Colbert, Ronald P.

This paper describes 10 factors that impact misguided perceptions of teacher preparation and teacher quality, especially elementary teachers prepared in highly-structured, university-based teacher preparation programs: (1) the offshoot of P-12 preparation, prior to attending postsecondary programs; (2) alignment of certification tests to state…

Creating Spaces for Children's Agency: "I Wonder…" Formulations in Teacher-Child Interactions

ERIC Educational Resources Information Center

Houen, Sandy; Danby, Susan; Farrell, Ann; Thorpe, Karen

2016-01-01

Affording children's agency is an important pedagogical underpinning of a high-quality early childhood program. Yet little is known about how teachers' interactions create spaces for children's agency. From the perspectives of ethnomethodology and conversation analysis, this paper investigates how teachers and children navigate agency through…

Preschool and Prosperity. Policy Paper No. 2014-017

ERIC Educational Resources Information Center

Bartik, Timothy J.

2014-01-01

Substantial research shows that high-quality early childhood education programs have a large economic payoff. This payoff is increased earnings for former child participants, increased earnings for parents, and increased earnings for all workers when average worker skills improve. A program package of universal pre-K, combined with child care and…

Universities Becoming the Outsourcing Solution

ERIC Educational Resources Information Center

Bohley, Katharine A.

2010-01-01

This paper provides a road map for universities to follow in responding to corporations that are in need of a solution to the dilemma of building an executive development program and simultaneously providing their executives with a high quality MBA degree. Difficulties experienced by many corporations are complicated by the fact that MBA programs…

Measuring Teacher Effectiveness in Gifted Education: Some Challenges and Suggestions

ERIC Educational Resources Information Center

Welsh, Megan E.

2011-01-01

States and districts are under increasing pressure to evaluate the effectiveness of their teachers and to ensure that all students receive high-quality instruction. This article describes some of the challenges associated with current effectiveness approaches, including paper-and-pencil tests of pedagogical content knowledge, classroom observation…

Integrated Social and Quality of Service Trust Management of Mobile Groups in Ad Hoc Networks

DTIC Science & Technology

2013-01-01

high resiliency to malicious attacks and misbehaving nodes. Keywords—trust management; mobile ad hoc networks; QoS trust; social trust; trust...paper we address an importance issue of trust management protocol design for MANETs: trust bias minimization despite misbehaving nodes performing

Teaching the Young Child: Goals for Illinois.

ERIC Educational Resources Information Center

Katz, Lilian G.

This paper, outlining the present goals, purposes and future role of the Illinois Association for the Education of Young Children (ILLAEYC), discusses what is involved in providing high quality programs for young children everywhere, not only in Illinois. Among ILLAEYC's objectives: (1) to provide a channel of information for people working with…

Rethinking Early Education

ERIC Educational Resources Information Center

Celeste, Eric

2017-01-01

The National Association for the Education of Young Children (NAEYC) says in its current policy paper that, for high-quality early education to exist outside of tiny islands across the country, the following must be addressed: (1) teacher preparation; (2) ongoing professional learning; and (3) disparity in early education teacher pay. To achieve…

Comparing the information conveyed by envelope modulation for speech intelligibility, speech quality, and music quality.

PubMed

Kates, James M; Arehart, Kathryn H

2015-10-01

This paper uses mutual information to quantify the relationship between envelope modulation fidelity and perceptual responses. Data from several previous experiments that measured speech intelligibility, speech quality, and music quality are evaluated for normal-hearing and hearing-impaired listeners. A model of the auditory periphery is used to generate envelope signals, and envelope modulation fidelity is calculated using the normalized cross-covariance of the degraded signal envelope with that of a reference signal. Two procedures are used to describe the envelope modulation: (1) modulation within each auditory frequency band and (2) spectro-temporal processing that analyzes the modulation of spectral ripple components fit to successive short-time spectra. The results indicate that low modulation rates provide the highest information for intelligibility, while high modulation rates provide the highest information for speech and music quality. The low-to-mid auditory frequencies are most important for intelligibility, while mid frequencies are most important for speech quality and high frequencies are most important for music quality. Differences between the spectral ripple components used for the spectro-temporal analysis were not significant in five of the six experimental conditions evaluated. The results indicate that different modulation-rate and auditory-frequency weights may be appropriate for indices designed to predict different types of perceptual relationships.

Quality evaluation of Hypericum ascyron extract by two-dimensional high-performance liquid chromatography coupled with the colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide method.

PubMed

Li, Xiu-Mei; Luo, Xue-Gang; Zhang, Chao-Zheng; Wang, Nan; Zhang, Tong-Cun

2015-02-01

In this paper, a heart-cutting two-dimensional high-performance liquid chromatography coupled with the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method was established for controlling the quality of different batches of Hypericum ascyron extract for the first time. In comparison with the common one-dimensional fingerprint, the second-dimensional fingerprint compiled additional spectral data and was hence more informative. The quality of H. ascyron extract was further evaluated by similarity measures and the same results were achieved, the correlation coefficients of the similarity of ten batches of H. ascyron extract were ＞0.99. Furthermore, we also evaluated the quality of the ten batches of H. ascyron extract by antibacterial activity. The result demonstrated that the quality of the ten batches of H. ascyron extract was not significantly different by MTT. Finally, we demonstrated that the second-dimensional fingerprint coupled with the MTT method was a more powerful tool to characterize the quality of samples of batch to batch. Therefore the proposed method could be used to comprehensively conduct the quality control of traditional Chinese medicines. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Comparing the information conveyed by envelope modulation for speech intelligibility, speech quality, and music quality

PubMed Central

Kates, James M.; Arehart, Kathryn H.

2015-01-01

This paper uses mutual information to quantify the relationship between envelope modulation fidelity and perceptual responses. Data from several previous experiments that measured speech intelligibility, speech quality, and music quality are evaluated for normal-hearing and hearing-impaired listeners. A model of the auditory periphery is used to generate envelope signals, and envelope modulation fidelity is calculated using the normalized cross-covariance of the degraded signal envelope with that of a reference signal. Two procedures are used to describe the envelope modulation: (1) modulation within each auditory frequency band and (2) spectro-temporal processing that analyzes the modulation of spectral ripple components fit to successive short-time spectra. The results indicate that low modulation rates provide the highest information for intelligibility, while high modulation rates provide the highest information for speech and music quality. The low-to-mid auditory frequencies are most important for intelligibility, while mid frequencies are most important for speech quality and high frequencies are most important for music quality. Differences between the spectral ripple components used for the spectro-temporal analysis were not significant in five of the six experimental conditions evaluated. The results indicate that different modulation-rate and auditory-frequency weights may be appropriate for indices designed to predict different types of perceptual relationships. PMID:26520329

Leadership quality: a factor important for social capital in healthcare organizations.

PubMed

Strömgren, Marcus; Eriksson, Andrea; Ahlstrom, Linda; Bergman, David Kristofer; Dellve, Lotta

2017-04-10

Purpose The purpose of this paper is to investigate the relation between leadership and social capital and what qualities of leadership are important for social capital among employees in hospital settings over time. Design/methodology/approach A cohort of employees in hospitals answered a questionnaire at three occasions. Five small (approx. 100-bed) or mid-sized (approx. 500-bed) hospitals were included. The response rate was 54 percent at baseline ( n=865), 59 percent at one-year follow-up ( n=908) and 67 percent at two-year follow-up ( n=632). Findings Repeated measures over time showed differences between groups in levels of social capital with respect to levels of leadership quality. Relation-oriented leadership had the strongest association with social capital. There was evidence that leadership was associated with social capital over time and that different kinds of leadership qualities were associated with social capital. Research limitations/implications This study conducted and analyzed quantitative data, and therefore, there is no knowledge of managers' or employees' own perceptions in this study. However, it would be interesting to compare managers' decreased and increased leadership quality and how such differences affect social capital over time. Practical implications The findings feature the possibility for healthcare leaders to build high quality leadership as an important resource for social capital, by using different leadership orientations under different circumstances. Originality/value The paper showed that leadership was an important factor for building social capital and that different leadership qualities have different importance with respect to certain circumstances.

Evaluation of Safety, Quality and Productivity in Construction

NASA Astrophysics Data System (ADS)

Usmen, M. A.; Vilnitis, M.

2015-11-01

This paper examines the success indicators of construction projects, safety, quality and productivity, in terms of their implications and impacts during and after construction. First safety is considered during construction with a focus on hazard identification and the prevention of occupational accidents and injuries on worksites. The legislation mandating safety programs, training and compliance with safety standards is presented and discussed. Consideration of safety at the design stage is emphasized. Building safety and the roles of building codes in prevention of structural failures are also covered in the paper together with factors affecting building failures and methods for their prevention. Quality is introduced in the paper from the perspective of modern total quality management. Concepts of quality management, quality control, quality assurance and Six Sigma and how they relate to building quality and structural integrity are discussed with examples. Finally, productivity concepts are presented with emphasis on effective project management to minimize loss of productivity, complimented by lean construction and lean Six Sigma principles. The paper concludes by synthesizing the relationships between safety, quality and productivity.

A Low Cost High Density Sensor Network for Air Quality at London Heathrow Airport

NASA Astrophysics Data System (ADS)

Bright, V.; Mead, M. I.; Popoola, O. A.; Baron, R. P.; Saffell, J.; Stewart, G.; Kaye, P.; Jones, R.

2012-12-01

Atmospheric composition within urban areas has a direct effect on the air quality of an environment in which a large majority of people live and work. Atmospheric pollutants including ozone (O3), nitrogen dioxide (NO2), volatile organic compounds (VOCs) and particulate matter (PM) can have a significant effect on human health. As such it is important to determine the potential exposure of individuals to these atmospheric constituents and investigate the processes that lead to the degradation of air quality within the urban environment. Whilst modelled pollutant levels on the local scale often suggest high degrees of spatial and temporal variability, the relatively sparse fixed site automated urban networks only provide low spatial resolution data that do not appear adequate in detecting such small scale variability. In this paper we demonstrate that measurements can now be made using networks of low-cost sensors that utilise a variety of techniques, including electrochemical and optical, to measure concentrations of atmospheric species. Once equipped with GPS and GPRS to determine position and transmit data respectively, these networks have the potential to provide valuable insights into pollutant variability inherent on the local or micro-scale. The methodology has been demonstrated successfully in field campaigns carried out in cities including London and Valencia, and is now being deployed as part of the Sensor Networks for Air Quality currently deployed at London Heathrow airport (SNAQ-Heathrow) which is outlined in the partner paper presented by Mead et al. (this conference). The SNAQ-Heathrow network of 50 sensor nodes will provide an unprecedented data set that includes measurements of O3, NO, NO2, CO, CO2, SO2, total VOCs, size-speciated PM as well as meteorological variables that include temperature, relative humidity, wind speed and direction. This network will provide high temporal (20 second intervals) and spatial (50 sites within the airport area) resolution data over a 12 month period with data transmitted back to a server every 2 hours. In this paper we present the data capture and storage, data accessibility, data mining and visualisation techniques applied to the measurements of the SNAQ Heathrow high density sensor network, the preliminary results of which provide an insight into the potential use of such networks in characterising air quality, emissions and validating dispersion models on local scales. We also present a web based interface developed for the sensor network that allows users to access archived data and assess meteorological conditions, atmospheric dispersion, pollutant levels and emission rates.

Video quality assessment using motion-compensated temporal filtering and manifold feature similarity

PubMed Central

Yu, Mei; Jiang, Gangyi; Shao, Feng; Peng, Zongju

2017-01-01

Well-performed Video quality assessment (VQA) method should be consistent with human visual systems for better prediction accuracy. In this paper, we propose a VQA method using motion-compensated temporal filtering (MCTF) and manifold feature similarity. To be more specific, a group of frames (GoF) is first decomposed into a temporal high-pass component (HPC) and a temporal low-pass component (LPC) by MCTF. Following this, manifold feature learning (MFL) and phase congruency (PC) are used to predict the quality of temporal LPC and temporal HPC respectively. The quality measures of the LPC and the HPC are then combined as GoF quality. A temporal pooling strategy is subsequently used to integrate GoF qualities into an overall video quality. The proposed VQA method appropriately processes temporal information in video by MCTF and temporal pooling strategy, and simulate human visual perception by MFL. Experiments on publicly available video quality database showed that in comparison with several state-of-the-art VQA methods, the proposed VQA method achieves better consistency with subjective video quality and can predict video quality more accurately. PMID:28445489

A Metric-Based Validation Process to Assess the Realism of Synthetic Power Grids

DOE Office of Scientific and Technical Information (OSTI.GOV)

Birchfield, Adam; Schweitzer, Eran; Athari, Mir

Public power system test cases that are of high quality benefit the power systems research community with expanded resources for testing, demonstrating, and cross-validating new innovations. Building synthetic grid models for this purpose is a relatively new problem, for which a challenge is to show that created cases are sufficiently realistic. This paper puts forth a validation process based on a set of metrics observed from actual power system cases. These metrics follow the structure, proportions, and parameters of key power system elements, which can be used in assessing and validating the quality of synthetic power grids. Though wide diversitymore » exists in the characteristics of power systems, the paper focuses on an initial set of common quantitative metrics to capture the distribution of typical values from real power systems. The process is applied to two new public test cases, which are shown to meet the criteria specified in the metrics of this paper.« less

A Metric-Based Validation Process to Assess the Realism of Synthetic Power Grids

DOE PAGES

Birchfield, Adam; Schweitzer, Eran; Athari, Mir; ...

2017-08-19

Public power system test cases that are of high quality benefit the power systems research community with expanded resources for testing, demonstrating, and cross-validating new innovations. Building synthetic grid models for this purpose is a relatively new problem, for which a challenge is to show that created cases are sufficiently realistic. This paper puts forth a validation process based on a set of metrics observed from actual power system cases. These metrics follow the structure, proportions, and parameters of key power system elements, which can be used in assessing and validating the quality of synthetic power grids. Though wide diversitymore » exists in the characteristics of power systems, the paper focuses on an initial set of common quantitative metrics to capture the distribution of typical values from real power systems. The process is applied to two new public test cases, which are shown to meet the criteria specified in the metrics of this paper.« less

Recent advances in Oral Oncology 2008; squamous cell carcinoma aetiopathogenesis and experimental studies.

PubMed

Bagan, Jose V; Scully, Crispian

2009-07-01

This paper provides a synopsis of the main papers related to the aetiopathogenesis of oral and oropharyngeal squamous cell carcinoma (OSCC) and head and neck SCC (HNSCC) published in 2008 in Oral Oncology - an international interdisciplinary journal which publishes high quality original research, clinical trials and review articles, and all other scientific articles relating to the aetiopathogenesis, epidemiology, prevention, clinical features, diagnosis, treatment, and management of patients with neoplasms in the head and neck, and orofacial disease in patients with malignant disease.