high safety margin: Topics by Science.gov

Sample records for high safety margin

Flexible Control of Safety Margins for Action Based on Environmental Variability.

PubMed

Hadjiosif, Alkis M; Smith, Maurice A

2015-06-17

To reduce the risk of slip, grip force (GF) control includes a safety margin above the force level ordinarily sufficient for the expected load force (LF) dynamics. The current view is that this safety margin is based on the expected LF dynamics, amounting to a static safety factor like that often used in engineering design. More efficient control could be achieved, however, if the motor system reduces the safety margin when LF variability is low and increases it when this variability is high. Here we show that this is indeed the case by demonstrating that the human motor system sizes the GF safety margin in proportion to an internal estimate of LF variability to maintain a fixed statistical confidence against slip. In contrast to current models of GF control that neglect the variability of LF dynamics, we demonstrate that GF is threefold more sensitive to the SD than the expected value of LF dynamics, in line with the maintenance of a 3-sigma confidence level. We then show that a computational model of GF control that includes a variability-driven safety margin predicts highly asymmetric GF adaptation between increases versus decreases in load. We find clear experimental evidence for this asymmetry and show that it explains previously reported differences in how rapidly GFs and manipulatory forces adapt. This model further predicts bizarre nonmonotonic shapes for GF learning curves, which are faithfully borne out in our experimental data. Our findings establish a new role for environmental variability in the control of action. Copyright © 2015 the authors 0270-6474/15/359106-16$15.00/0.
Determination of safety margins for whole blood concentrations of alcohol and nineteen drugs in driving under the influence cases.

PubMed

Kristoffersen, Lena; Strand, Dag Helge; Liane, Veronica Horpestad; Vindenes, Vigdis; Tvete, Ingunn Fride; Aldrin, Magne

2016-02-01

Legislative limits for driving under the influence of 20 non-alcohol drugs were introduced in Norway in February 2012. Per se limits corresponding to blood alcohol concentrations (BAC) of 0.2g/kg were established for 20 psychoactive drugs, and limits for graded sanctions corresponding to BACs of 0.5 and 1.2g/kg were determined for 13 of these drugs. This new legislation made it possible for the courts to make sentences based on the analytical results, similar to the situation for alcohol. To ensure that the reported concentration is as least as high as the true concentration, with a 99% safety level, safety margins had to be calculated for each of the substances. Diazepam, tetrahydrocannabinol (THC) and alcohol were used as model substances to establish a new model for estimating the safety margins. The model was compared with a previous used model established several years ago, by a similar yet much simpler model, and they were found to be in agreement. The measurement uncertainties depend on the standard batch used, the work list and the measurements' replicate. A Bayesian modelling approach was used to determine the parameters in the model, using a dataset of 4700 diazepam positive specimens and 5400 THC positive specimens. Different safety margins were considered for low and high concentration levels of diazepam (≤2μM (0.6mg/L) and >2μM) and THC (≤0.01μM (0.003mg/L) and >0.01μM). The safety margins were for diazepam 19.5% (≤2μM) and 34% (>2μM), for THC 19.5% (≤0.01μM) and 24.9% (>0.01μM). Concentration dependent safety margins for BAC were based on a dataset of 29500 alcohol positive specimens, and were in the range 10.4% (0.1g/kg) to 4.0% (4.0g/kg) at a 99% safety level. A simplified approach was used to establish safety margins for the compounds amphetamine, MDMA, methamphetamine, alprazolam, phenazepam, flunitrazepam, clonazepam, nitrazepam, oxazepam, buprenorphine, GHB, methadone, ketamine, cocaine, morphine, zolpidem and zopiclone. The safety margins for these drugs were in the range 34-41%. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
Light Water Reactor Sustainability Program: Risk-Informed Safety Margins Characterization (RISMC) Pathway Technical Program Plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis; Rabiti, Cristian; Martineau, Richard

Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). As the current Light Water Reactor (LWR) NPPs age beyond 60 years, there are possibilities for increased frequency of Systems, Structures, and Components (SSCs) degradations or failures that initiate safety-significant events, reduce existing accident mitigation capabilities, or create new failure modes. Plant designers commonly “over-design” portions of NPPs and provide robustness in the form of redundant and diverse engineered safety features to ensure that, even in the case of well-beyond design basis scenarios, public health and safety will be protected with a very high degreemore » of assurance. This form of defense-in-depth is a reasoned response to uncertainties and is often referred to generically as “safety margin.” Historically, specific safety margin provisions have been formulated, primarily based on “engineering judgment.”« less
Is it necessary to plan with safety margins for actively scanned proton therapy?

NASA Astrophysics Data System (ADS)

Albertini, F.; Hug, E. B.; Lomax, A. J.

2011-07-01

In radiation therapy, a plan is robust if the calculated and the delivered dose are in agreement, even in the case of different uncertainties. The current practice is to use safety margins, expanding the clinical target volume sufficiently enough to account for treatment uncertainties. This, however, might not be ideal for proton therapy and in particular when using intensity modulated proton therapy (IMPT) plans as degradation in the dose conformity could also be found in the middle of the target resulting from misalignments of highly in-field dose gradients. Single field uniform dose (SFUD) and IMPT plans have been calculated for different anatomical sites and the need for margins has been assessed by analyzing plan robustness to set-up and range uncertainties. We found that the use of safety margins is a good way to improve plan robustness for SFUD and IMPT plans with low in-field dose gradients but not necessarily for highly modulated IMPT plans for which only a marginal improvement in plan robustness could be detected through the definition of a planning target volume.
Safety margins in older adults increase with improved control of a dynamic object

PubMed Central

Hasson, Christopher J.; Sternad, Dagmar

2014-01-01

Older adults face decreasing motor capabilities due to pervasive neuromuscular degradations. As a consequence, errors in movement control increase. Thus, older individuals should maintain larger safety margins than younger adults. While this has been shown for object manipulation tasks, several reports on whole-body activities, such as posture and locomotion, demonstrate age-related reductions in safety margins. This is despite increased costs for control errors, such as a fall. We posit that this paradox could be explained by the dynamic challenge presented by the body or also an external object, and that age-related reductions in safety margins are in part due to a decreased ability to control dynamics. To test this conjecture we used a virtual ball-in-cup task that had challenging dynamics, yet afforded an explicit rendering of the physics and safety margin. The hypotheses were: (1) When manipulating an object with challenging dynamics, older adults have smaller safety margins than younger adults. (2) Older adults increase their safety margins with practice. Nine young and 10 healthy older adults practiced moving the virtual ball-in-cup to a target location in exactly 2 s. The accuracy and precision of the timing error quantified skill, and the ball energy relative to an escape threshold quantified the safety margin. Compared to the young adults, older adults had increased timing errors, greater variability, and decreased safety margins. With practice, both young and older adults improved their ability to control the object with decreased timing errors and variability, and increased their safety margins. These results suggest that safety margins are related to the ability to control dynamics, and may explain why in tasks with simple dynamics older adults use adequate safety margins, but in more complex tasks, safety margins may be inadequate. Further, the results indicate that task-specific training may improve safety margins in older adults. PMID:25071566
Study of a safety margin system for powered-lift STOL aircraft

NASA Technical Reports Server (NTRS)

Heffley, R. K.; Jewell, W. F.

1978-01-01

A study was conducted to explore the feasibility of a safety margin system for powered-lift aircraft which require a backside piloting technique. The objective of the safety margin system was to present multiple safety margin criteria as a single variable which could be tracked manually or automatically and which could be monitored for the purpose of deriving safety margin status. The study involved a pilot-in-the-loop analysis of several safety margin system concepts and a simulation experiment to evaluate those concepts which showed promise of providing a good solution. A system was ultimately configured which offered reasonable compromises in controllability, status information content, and the ability to regulate the safety margin at some expense of the allowable low speed flight path envelope.
System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1996-01-01

Demonstration of required safety margins on critical electrical/electronic circuits in large complex systems has become an implementation and cost problem. These margins are the difference between the activation level of the circuit and the electrical noise on the circuit in the actual operating environment. This document discusses the origin of the requirement and gives a detailed process flow for the identification of the system electromagnetic compatibility (EMC) critical circuit list. The process flow discusses the roles of engineering disciplines such as systems engineering, safety, and EMC. Design and analysis guidelines are provided to assist the designer in assuring the system design has a high probability of meeting the margin requirements. Examples of approaches used on actual programs (Skylab and Space Shuttle Solid Rocket Booster) are provided to show how variations of the approach can be used successfully.
Risk Informed Margins Management as part of Risk Informed Safety Margin Characterization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith

2014-06-01

The ability to better characterize and quantify safety margin is important to improved decision making about Light Water Reactor (LWR) design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plantmore » safety and performance will become known. To support decision making related to economics, readability, and safety, the Risk Informed Safety Margin Characterization (RISMC) Pathway provides methods and tools that enable mitigation options known as risk informed margins management (RIMM) strategies.« less
Integrating Safety Assessment Methods using the Risk Informed Safety Margins Characterization (RISMC) Approach

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli

Safety is central to the design, licensing, operation, and economics of nuclear power plants (NPPs). As the current light water reactor (LWR) NPPs age beyond 60 years, there are possibilities for increased frequency of systems, structures, and components (SSC) degradations or failures that initiate safety significant events, reduce existing accident mitigation capabilities, or create new failure modes. Plant designers commonly “over-design” portions of NPPs and provide robustness in the form of redundant and diverse engineered safety features to ensure that, even in the case of well-beyond design basis scenarios, public health and safety will be protected with a very highmore » degree of assurance. This form of defense-in-depth is a reasoned response to uncertainties and is often referred to generically as “safety margin.” Historically, specific safety margin provisions have been formulated primarily based on engineering judgment backed by a set of conservative engineering calculations. The ability to better characterize and quantify safety margin is important to improved decision making about LWR design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margin management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. In addition, as research and development (R&D) in the LWR Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. To support decision making related to economics, readability, and safety, the RISMC Pathway provides methods and tools that enable mitigation options known as margins management strategies. The purpose of the RISMC Pathway R&D is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. As the lead Department of Energy (DOE) Laboratory for this Pathway, the Idaho National Laboratory (INL) is tasked with developing and deploying methods and tools that support the quantification and management of safety margin and uncertainty.« less
Los Alamos Novel Rocket Design Flight Tested

ScienceCinema

Tappan, Bryce

2018-04-16

Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.
Los Alamos Novel Rocket Design Flight Tested

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tappan, Bryce

Los Alamos National Laboratory scientists recently flight tested a new rocket design that includes a high-energy fuel and a motor design that also delivers a high degree of safety. Researchers will now work to scale-up the design, as well as explore miniaturization of the system, in order to exploit all potential applications that would require high-energy, high-velocity, and correspondingly high safety margins.
Brazed Joints Design and Allowables: Discuss Margins of Safety in Critical Brazed Structures

NASA Technical Reports Server (NTRS)

FLom, Yury

2009-01-01

This slide presentation tutorial discusses margins of safety in critical brazed structures. It reviews: (1) the present situation (2) definition of strength (3) margins of safety (4) design allowables (5) mechanical testing (6) failure criteria (7) design flowchart (8) braze gap (9) residual stresses and (10) delayed failures. This presentation addresses the strength of the brazed joints, the methods of mechanical testing, and our ability to evaluate the margins of safety of the brazed joints as it applies to the design of critical and expensive brazed assemblies.
Developing Probabilistic Safety Performance Margins for Unknown and Underappreciated Risks

NASA Technical Reports Server (NTRS)

Benjamin, Allan; Dezfuli, Homayoon; Everett, Chris

2015-01-01

Probabilistic safety requirements currently formulated or proposed for space systems, nuclear reactor systems, nuclear weapon systems, and other types of systems that have a low-probability potential for high-consequence accidents depend on showing that the probability of such accidents is below a specified safety threshold or goal. Verification of compliance depends heavily upon synthetic modeling techniques such as PRA. To determine whether or not a system meets its probabilistic requirements, it is necessary to consider whether there are significant risks that are not fully considered in the PRA either because they are not known at the time or because their importance is not fully understood. The ultimate objective is to establish a reasonable margin to account for the difference between known risks and actual risks in attempting to validate compliance with a probabilistic safety threshold or goal. In this paper, we examine data accumulated over the past 60 years from the space program, from nuclear reactor experience, from aircraft systems, and from human reliability experience to formulate guidelines for estimating probabilistic margins to account for risks that are initially unknown or underappreciated. The formulation includes a review of the safety literature to identify the principal causes of such risks.
Facing the Recession: How Did Safety-Net Hospitals Fare Financially Compared with Their Peers?

PubMed Central

Reiter, Kristin L; Jiang, H Joanna; Wang, Jia

2014-01-01

Objective To examine the effect of the recession on the financial performance of safety-net versus non-safety-net hospitals. Data Sources/Study Setting Agency for Healthcare Research and Quality Hospital Cost and Utilization Project State Inpatient Databases, Medicare Cost Reports, American Hospital Association Annual Survey, InterStudy, and Area Health Resource File. Study Design Retrospective, longitudinal panel of hospitals, 2007–2011. Safety-net hospitals were identified using percentage of patients who were Medicaid or uninsured. Generalized estimating equations were used to estimate average effects of the recession on hospital operating and total margins, revenues and expenses in each year, 2008–2011, comparing safety-net with non-safety-net hospitals. Data Collection/Extraction Methods 1,453 urban, nonfederal, general acute hospitals in 32 states with complete data. Principal Findings Safety-net hospitals, as identified in 2007, had lower operating and total margins. The gap in operating margin between safety-net and non-safety-net hospitals was sustained throughout the recession; however, total margin was more negatively affected for non-safety-net hospitals in 2008. Higher percentages of Medicaid and uninsured patients were associated with lower revenue in private hospitals in all years, and lower revenue and expenses in public hospitals in 2011. Conclusions Safety-net hospitals may not be disproportionately vulnerable to macro-economic fluctuations, but their significantly lower margins leave less financial cushion to weather sustained financial pressure. PMID:25220012
Development, fabrication and test of a high purity silica heat shield

NASA Technical Reports Server (NTRS)

Rusert, E. L.; Drennan, D. N.; Biggs, M. S.

1978-01-01

A highly reflective hyperpure ( 25 ppm ion impurities) slip cast fused silica heat shield material developed for planetary entry probes was successfully scaled up. Process development activities for slip casting large parts included green strength improvements, casting slip preparation, aggregate casting, strength, reflectance, and subscale fabrication. Successful fabrication of a one-half scale Saturn probe (shape and size) heat shield was accomplished while maintaining the silica high purity and reflectance through the scale-up process. However, stress analysis of this original aggregate slip cast material indicated a small margin of safety (MS. = +4%) using a factor of safety of 1.25. An alternate hyperpure material formulation to increase the strength and toughness for a greater safety margin was evaluated. The alternate material incorporates short hyperpure silica fibers into the casting slip. The best formulation evaluated has a 50% by weight fiber addition resulting in an 80% increase in flexural strength and a 170% increase in toughness over the original aggregate slip cast materials with comparable reflectance.
The effects of safety practice, technology adoption, and firm characteristics on motor carrier safety

DOT National Transportation Integrated Search

2004-01-01

The theory of the firm suggests that firms should maximize profit by investing in safety until : marginal cost is equal to the marginal benefit. This paper addresses motor carrier safety from the : perspective of the firm, developing the theoretical ...
Hydraulic safety margins and air-seeding thresholds in roots, trunks, branches and petioles of four northern hardwood trees.

PubMed

Wason, Jay W; Anstreicher, Katherine S; Stephansky, Nathan; Huggett, Brett A; Brodersen, Craig R

2018-04-16

During drought, xylem sap pressures can approach or exceed critical thresholds where gas embolisms form and propagate through the xylem network, leading to systemic hydraulic dysfunction. The vulnerability segmentation hypothesis (VSH) predicts that low-investment organs (e.g. leaf petioles) should be more vulnerable to embolism spread compared to high-investment, perennial organs (e.g. trunks, stems), as a means of mitigating embolism spread and excessive negative pressures in the perennial organs. We tested this hypothesis by measuring air-seeding thresholds using the single-vessel air-injection method and calculating hydraulic safety margins in four northern hardwood tree species of the northeastern United States, in both saplings and canopy height trees, and at five points along the soil-plant-atmosphere continuum. Acer rubrum was the most resistant to air-seeding and generally supported the VSH. However, Fagus grandifolia, Fraxinus americana and Quercus rubra showed little to no variation in air-seeding thresholds across organ types within each species. Leaf-petiole xylem operated at water potentials close to or exceeding their hydraulic safety margins in all species, whereas roots, trunks and stems of A. rubrum, F. grandifolia and Q. rubra operated within their safety margins, even during the third-driest summer in the last 100 yr. © 2018 The Authors. New Phytologist © 2018 New Phytologist Trust.
Estimation of Inherent Safety Margins in Loaded Commercial Spent Nuclear Fuel Casks

DOE PAGES

Banerjee, Kaushik; Robb, Kevin R.; Radulescu, Georgeta; ...

2016-06-15

We completed a novel assessment to determine the unquantified and uncredited safety margins (i.e., the difference between the licensing basis and as-loaded calculations) available in as-loaded spent nuclear fuel (SNF) casks. This assessment was performed as part of a broader effort to assess issues and uncertainties related to the continued safety of casks during extended storage and transportability following extended storage periods. Detailed analyses crediting the actual as-loaded cask inventory were performed for each of the casks at three decommissioned pressurized water reactor (PWR) sites to determine their characteristics relative to regulatory safety criteria for criticality, thermal, and shielding performance.more » These detailed analyses were performed in an automated fashion by employing a comprehensive and integrated data and analysis tool—Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS). Calculated uncredited criticality margins from 0.07 to almost 0.30 Δk eff were observed; calculated decay heat margins ranged from 4 to almost 22 kW (as of 2014); and significant uncredited transportation dose rate margins were also observed. The results demonstrate that, at least for the casks analyzed here, significant uncredited safety margins are available that could potentially be used to compensate for SNF assembly and canister structural performance related uncertainties associated with long-term storage and subsequent transportation. The results also suggest that these inherent margins associated with how casks are loaded could support future changes in cask licensing to directly or indirectly credit the margins. Work continues to quantify the uncredited safety margins in the SNF casks loaded at other nuclear reactor sites.« less
A method for identifying EMI critical circuits during development of a large C3

NASA Astrophysics Data System (ADS)

Barr, Douglas H.

The circuit analysis methods and process Boeing Aerospace used on a large, ground-based military command, control, and communications (C3) system are described. This analysis was designed to help identify electromagnetic interference (EMI) critical circuits. The methodology used the MIL-E-6051 equipment criticality categories as the basis for defining critical circuits, relational database technology to help sort through and account for all of the approximately 5000 system signal cables, and Macintosh Plus personal computers to predict critical circuits based on safety margin analysis. The EMI circuit analysis process systematically examined all system circuits to identify which ones were likely to be EMI critical. The process used two separate, sequential safety margin analyses to identify critical circuits (conservative safety margin analysis, and detailed safety margin analysis). These analyses used field-to-wire and wire-to-wire coupling models using both worst-case and detailed circuit parameters (physical and electrical) to predict circuit safety margins. This process identified the predicted critical circuits that could then be verified by test.
Safety margins in the implementation of planetary quarantine requirements

NASA Technical Reports Server (NTRS)

Schalkowsky, S.; Jacoby, I.

1972-01-01

The formulation of planetary quarantine requirements, and their implementation as determined by a risk allocation model, is discussed. The model defines control safety margins with particular emphasis on utility in achieving the desired minimization of excessive margins, and their effect on implementation procedures.

Texas curve margin of safety.

DOT National Transportation Integrated Search

2013-01-01

This software can be used to assist with the assessment of margin of safety for a horizontal curve. It is intended for use by engineers and technicians responsible for safety analysis or management of rural highway pavement or traffic control devices...
Light Water Reactor Sustainability Program FY13 Status Update for EPRI - RISMC Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis

2013-09-01

The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway research and development (R&D) is to support plant decisions for risk-informed margins management with the aim to improve economics, reliability, and sustain safety of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced "RISMC toolkit" that enables more accurate representation of NPP safety margin. In order to carry out the R&D needed for the Pathway, the Idaho Nationalmore » Laboratory (INL) is collaborating with the Electric Power Research Institute (EPRI) in order to focus on applications of interest to the U.S. nuclear power industry. This report documents the collaboration activities performed between INL and EPRI during FY2013.« less
Improved Safety Margin Characterization of Risk from Loss of Offsite Power

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Paul

Original intent: The original intent of this task was “support of the Risk-Informed Safety Margin Characteristic (RISMC) methodology in order” “to address … efficiency of computation so that more accurate and cost-effective techniques can be used to address safety margin characterizations” (S. M. Hess et al., “Risk-Informed Safety Margin Characterization,” Procs. ICONE17, Brussels, July 2009, CD format). It was intended that “in Task 1 itself this improvement will be directed toward upon the very important issue of Loss of Offsite Power (LOOP) events,” more specifically toward the challenge of efficient computation of the multidimensional nonrecovery integral that has been discussedmore » by many previous contributors to the theory of nuclear safety. It was further envisioned that “three different computational approaches will be explored,” corresponding to the three subtasks listed below; deliverables were tied to the individual subtasks.« less
Time Safety Margin: Theory and Practice

DTIC Science & Technology

2016-09-01

Basic Dive Recovery Terminology The Simplest Definition of TSM: Time Safety Margin is the time to directly travel from the worst-case vector to an...Safety Margin (TSM). TSM is defined as the time in seconds to directly travel from the worst case vector (i.e. worst case combination of parameters...invoked by this AFI, base recovery planning and risk management upon the calculated TSM. TSM is the time in seconds to di- rectly travel from the worst case
Inductionless or limited shock testing is possible in most patients with implantable cardioverter- defibrillators/cardiac resynchronization therapy defibrillators: results of the multicenter ASSURE Study (Arrhythmia Single Shock Defibrillation Threshold Testing Versus Upper Limit of Vulnerability: Risk Reduction Evaluation With Implantable Cardioverter-Defibrillator Implantations).

PubMed

Day, John D; Doshi, Rahul N; Belott, Peter; Birgersdotter-Green, Ulrika; Behboodikhah, Mahnaz; Ott, Peter; Glatter, Kathryn A; Tobias, Serge; Frumin, Howard; Lee, Byron K; Merillat, John; Wiener, Isaac; Wang, Samuel; Grogin, Harlan; Chun, Sung; Patrawalla, Rob; Crandall, Brian; Osborn, Jeffrey S; Weiss, J Peter; Lappe, Donald L; Neuman, Stacey

2007-05-08

Implantable cardioverter-defibrillators and cardiac resynchronization therapy defibrillators have relied on multiple ventricular fibrillation (VF) induction/defibrillation tests at implantation to ensure that the device can reliably sense, detect, and convert VF. The ASSURE Study (Arrhythmia Single Shock Defibrillation Threshold Testing Versus Upper Limit of Vulnerability: Risk Reduction Evaluation With Implantable Cardioverter-Defibrillator Implantations) is the first large, multicenter, prospective trial comparing vulnerability safety margin testing versus defibrillation safety margin testing with a single VF induction/defibrillation. A total of 426 patients receiving an implantable cardioverter-defibrillator or cardiac resynchronization therapy defibrillator underwent vulnerability safety margin or defibrillation safety margin screening at 14 J in a randomized order. After this, patients underwent confirmatory testing, which required 2 VF conversions without failure at < or = 21 J. Patients who passed their first 14-J and confirmatory tests, irrespective of the results of their second 14-J test, had their devices programmed to a 21-J shock for ventricular tachycardia (VT) or VF > or = 200 bpm and were followed up for 1 year. Of 420 patients who underwent 14-J vulnerability safety margin screening, 322 (76.7%) passed. Of these, 317 (98.4%) also passed 21-J confirmatory tests. Of 416 patients who underwent 14-J defibrillation safety margin screening, 343 (82.5%) passed, and 338 (98.5%) also passed 21-J confirmatory tests. Most clinical VT/VF episodes (32 of 37, or 86%) were terminated by the first shock, with no difference in first shock success. In all observed cases in which the first shock was unsuccessful, subsequent shocks terminated VT/VF without complication. Although spontaneous episodes of fast VT/VF were limited, there was no difference in the odds of first shock efficacy between groups. Screening with vulnerability safety margin or defibrillation safety margin may allow for inductionless or limited shock testing in most patients.
Station Blackout: A case study in the interaction of mechanistic and probabilistic safety analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Curtis Smith; Diego Mandelli; Cristian Rabiti

2013-11-01

The ability to better characterize and quantify safety margins is important to improved decision making about nuclear power plant design, operation, and plant life extension. As research and development (R&D) in the light-water reactor (LWR) Sustainability (LWRS) Program and other collaborative efforts yield new data, sensors, and improved scientific understanding of physical processes that govern the aging and degradation of plant SSCs needs and opportunities to better optimize plant safety and performance will become known. The purpose of the Risk Informed Safety Margin Characterization (RISMC) Pathway R&D is to support plant decisions for risk-informed margin management with the aim tomore » improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe the RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario.« less
Coordination of stem and leaf hydraulic conductance in southern California shrubs: a test of the hydraulic segmentation hypothesis.

PubMed

Pivovaroff, Alexandria L; Sack, Lawren; Santiago, Louis S

2014-08-01

Coordination of water movement among plant organs is important for understanding plant water use strategies. The hydraulic segmentation hypothesis (HSH) proposes that hydraulic conductance in shorter lived, 'expendable' organs such as leaves and longer lived, more 'expensive' organs such as stems may be decoupled, with resistance in leaves acting as a bottleneck or 'safety valve'. We tested the HSH in woody species from a Mediterranean-type ecosystem by measuring leaf hydraulic conductance (Kleaf) and stem hydraulic conductivity (KS). We also investigated whether leaves function as safety valves by relating Kleaf and the hydraulic safety margin (stem water potential minus the water potential at which 50% of conductivity is lost (Ψstem-Ψ50)). We also examined related plant traits including the operating range of water potentials, wood density, leaf mass per area, and leaf area to sapwood area ratio to provide insight into whole-plant water use strategies. For hydrated shoots, Kleaf was negatively correlated with KS , supporting the HSH. Additionally, Kleaf was positively correlated with the hydraulic safety margin and negatively correlated with the leaf area to sapwood area ratio. Consistent with the HSH, our data indicate that leaves may act as control valves for species with high KS , or a low safety margin. This critical role of leaves appears to contribute importantly to plant ecological specialization in a drought-prone environment. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.
Safety assessment of green tea based beverages and dried green tea extracts as nutritional supplements.

PubMed

Dekant, Wolfgang; Fujii, Kenkichi; Shibata, Eiichiro; Morita, Osamu; Shimotoyodome, Akira

2017-08-05

The safety of green tea infusions and green tea extract (GTE)-based products is reviewed regarding catechins. Epigallocatechin 3-gallate (EGCG), the major catechin present in green tea, is suspected of being responsible for liver toxicity reported in humans consuming food supplements. Intake of EGCG with green tea infusions and GTE-based beverages is up to about 450mg EGCG/person/day in Europe and higher in Asia. Consumption of green tea is not associated with liver damage in humans, and green tea infusion and GTE-based beverages are considered safe in the range of historical uses. In animal studies, EGCG's potency for liver effects is highly dependent on conditions of administration. Use of NOAELs from bolus administration to derive a tolerable upper intake level applying the margin of safety concept results in acceptable EGCG-doses lower than those from one cup of green tea. NOAELs from toxicity studies applying EGCG with diet/split of the daily dose are a better point of departure for risk characterization. In clinical intervention studies, liver effects were not observed after intakes below 600mg EGCG/person/day. Thus, a tolerable upper intake level of 300mg EGCG/person/day is proposed for food supplements; this gives a twofold safety margin to clinical studies that did not report liver effects and a margin of safety of 100 to the NOAELs in animal studies with dietary administration of green tea catechins. Copyright © 2017 Elsevier B.V. All rights reserved.
Safety and Tolerability of HSC835 in Patients With Hematological Malignancies

ClinicalTrials.gov

2017-04-03

Acute Myelocytic Leukemia; Acute Lymphocytic Leukemia; Chronic Myelogenous Leukemia; Myelodysplastic Syndrome; Chronic Lymphocytic Leukemia; Marginal Zone Lymphoma; Follicular Lymphomas; Large-cell Lymphoma; Lymphoblastic Lymphoma; Burkitt's Lymphoma; High Grade Lymphomas; Mantle-cell Lymphoma; Lymphoplasmacytic Lymphoma
Development of CO2 laser Doppler instrumentation for detection of clear air turbulence, volume 2: Appendices

NASA Technical Reports Server (NTRS)

Harris, C. E.; Jelalian, A. V.

1979-01-01

Analyses of the mounting and mount support systems of the clear air turbulence transmitters verify that satisfactory shock and vibration isolation are attained. The mount support structure conforms to flight crash safety requirements with high margins of safety. Restraint cables reinforce the mounts in the critical loaded forward direction limiting maximum forward system deflection to 1 1/4 inches.
System Guidelines for EMC Safety-Critical Circuits: Design, Selection, and Margin Demonstration

NASA Technical Reports Server (NTRS)

Lawton, R. M.

1996-01-01

Demonstration of safety margins for critical points (circuits) has traditionally been required since it first became a part of systems-level Electromagnetic Compatibility (EMC) requirements of MIL-E-6051C. The goal of this document is to present cost-effective guidelines for ensuring adequate Electromagnetic Effects (EME) safety margins on spacecraft critical circuits. It is for the use of NASA and other government agencies and their contractors to prevent loss of life, loss of spacecraft, or unacceptable degradation. This document provides practical definition and treatment guidance to contain costs within affordable limits.
Statistical issues in the design, conduct and analysis of two large safety studies.

PubMed

Gaffney, Michael

2016-10-01

The emergence, post approval, of serious medical events, which may be associated with the use of a particular drug or class of drugs, is an important public health and regulatory issue. The best method to address this issue is through a large, rigorously designed safety study. Therefore, it is important to elucidate the statistical issues involved in these large safety studies. Two such studies are PRECISION and EAGLES. PRECISION is the primary focus of this article. PRECISION is a non-inferiority design with a clinically relevant non-inferiority margin. Statistical issues in the design, conduct and analysis of PRECISION are discussed. Quantitative and clinical aspects of the selection of the composite primary endpoint, the determination and role of the non-inferiority margin in a large safety study and the intent-to-treat and modified intent-to-treat analyses in a non-inferiority safety study are shown. Protocol changes that were necessary during the conduct of PRECISION are discussed from a statistical perspective. Issues regarding the complex analysis and interpretation of the results of PRECISION are outlined. EAGLES is presented as a large, rigorously designed safety study when a non-inferiority margin was not able to be determined by a strong clinical/scientific method. In general, when a non-inferiority margin is not able to be determined, the width of the 95% confidence interval is a way to size the study and to assess the cost-benefit of relative trial size. A non-inferiority margin, when able to be determined by a strong scientific method, should be included in a large safety study. Although these studies could not be called "pragmatic," they are examples of best real-world designs to address safety and regulatory concerns. © The Author(s) 2016.
Effect of Smaller Left Ventricular Capture Threshold Safety Margins to Improve Device Longevity in Recipients of Cardiac Resynchronization-Defibrillation Therapy.

PubMed

Steinhaus, Daniel A; Waks, Jonathan W; Collins, Robert; Kleckner, Karen; Kramer, Daniel B; Zimetbaum, Peter J

2015-07-01

Device longevity in cardiac resynchronization therapy (CRT) is affected by the pacing capture threshold (PCT) and programmed pacing amplitude of the left ventricular (LV) pacing lead. The aims of this study were to evaluate the stability of LV pacing thresholds in a nationwide sample of CRT defibrillator recipients and to determine potential longevity improvements associated with a decrease in the LV safety margin while maintaining effective delivery of CRT. CRT defibrillator patients in the Medtronic CareLink database were eligible for inclusion. LV PCT stability was evaluated using ≥2 measurements over a 14-day period. Separately, a random sample of 7,250 patients with programmed right atrial and right ventricular amplitudes ≤2.5 V, LV thresholds ≤ 2.5 V, and LV pacing ≥90% were evaluated to estimate theoretical battery longevity improvement using LV safety margins of 0.5 and 1.5 V. Threshold stability analysis in 43,256 patients demonstrated LV PCT stability of <0.5 V in 77% of patients and <1 V in 95%. Device longevity analysis showed that the use of a 0.5-V safety margin increased average battery longevity by 0.62 years (95% confidence interval 0.61 to 0.63) compared with a safety margin of 1.5 V. Patients with LV PCTs >1 V had the greatest increases in battery life (mean increase 0.86 years, 95% confidence interval 0.85 to 0.87). In conclusion, nearly all CRT defibrillator patients had LV PCT stability <1.0 V. Decreasing the LV safety margin from 1.5 to 0.5 V provided consistent delivery of CRT for most patients and significantly improved battery longevity. Copyright © 2015 Elsevier Inc. All rights reserved.
Biophysics, environmental stochasticity, and the evolution of thermal safety margins in intertidal limpets.

PubMed

Denny, M W; Dowd, W W

2012-03-15

As the air temperature of the Earth rises, ecological relationships within a community might shift, in part due to differences in the thermal physiology of species. Prediction of these shifts - an urgent task for ecologists - will be complicated if thermal tolerance itself can rapidly evolve. Here, we employ a mechanistic approach to predict the potential for rapid evolution of thermal tolerance in the intertidal limpet Lottia gigantea. Using biophysical principles to predict body temperature as a function of the state of the environment, and an environmental bootstrap procedure to predict how the environment fluctuates through time, we create hypothetical time-series of limpet body temperatures, which are in turn used as a test platform for a mechanistic evolutionary model of thermal tolerance. Our simulations suggest that environmentally driven stochastic variation of L. gigantea body temperature results in rapid evolution of a substantial 'safety margin': the average lethal limit is 5-7°C above the average annual maximum temperature. This predicted safety margin approximately matches that found in nature, and once established is sufficient, in our simulations, to allow some limpet populations to survive a drastic, century-long increase in air temperature. By contrast, in the absence of environmental stochasticity, the safety margin is dramatically reduced. We suggest that the risk of exceeding the safety margin, rather than the absolute value of the safety margin, plays an underappreciated role in the evolution of thermal tolerance. Our predictions are based on a simple, hypothetical, allelic model that connects genetics to thermal physiology. To move beyond this simple model - and thereby potentially to predict differential evolution among populations and among species - will require significant advances in our ability to translate the details of thermal histories into physiological and population-genetic consequences.
INTEGRATION OF RELIABILITY WITH MECHANISTIC THERMALHYDRAULICS: REPORT ON APPROACH AND TEST PROBLEM RESULTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

J. S. Schroeder; R. W. Youngblood

The Risk-Informed Safety Margin Characterization (RISMC) pathway of the Light Water Reactor Sustainability Program is developing simulation-based methods and tools for analyzing safety margin from a modern perspective. [1] There are multiple definitions of 'margin.' One class of definitions defines margin in terms of the distance between a point estimate of a given performance parameter (such as peak clad temperature), and a point-value acceptance criterion defined for that parameter (such as 2200 F). The present perspective on margin is that it relates to the probability of failure, and not just the distance between a nominal operating point and a criterion.more » In this work, margin is characterized through a probabilistic analysis of the 'loads' imposed on systems, structures, and components, and their 'capacity' to resist those loads without failing. Given the probabilistic load and capacity spectra, one can assess the probability that load exceeds capacity, leading to component failure. Within the project, we refer to a plot of these probabilistic spectra as 'the logo.' Refer to Figure 1 for a notional illustration. The implications of referring to 'the logo' are (1) RISMC is focused on being able to analyze loads and spectra probabilistically, and (2) calling it 'the logo' tacitly acknowledges that it is a highly simplified picture: meaningful analysis of a given component failure mode may require development of probabilistic spectra for multiple physical parameters, and in many practical cases, 'load' and 'capacity' will not vary independently.« less
A review of inherent safety characteristics of metal alloy sodium-cooled fast reactor fuel against postulated accidents

DOE PAGES

Sofu, Tanju

2015-04-01

The thermal, mechanical, and neutronic performance of the metal alloy fast reactor fuel design complements the safety advantages of the liquid metal cooling and the pool-type primary system. Together, these features provide large safety margins in both normal operating modes and for a wide range of postulated accidents. In particular, they maximize the measures of safety associated with inherent reactor response to unprotected, double-fault accidents, and to minimize risk to the public and plant investment. High thermal conductivity and high gap conductance play the most significant role in safety advantages of the metallic fuel, resulting in a flatter radial temperaturemore » profile within the pin and much lower normal operation and transient temperatures in comparison to oxide fuel. Despite the big difference in melting point, both oxide and metal fuels have a relatively similar margin to melting during postulated accidents. When the metal fuel cladding fails, it typically occurs below the coolant boiling point and the damaged fuel pins remain coolable. Metal fuel is compatible with sodium coolant, eliminating the potential of energetic fuel--coolant reactions and flow blockages. All these, and the low retained heat leading to a longer grace period for operator action, are significant contributing factors to the inherently benign response of metallic fuel to postulated accidents. This paper summarizes the past analytical and experimental results obtained in past sodium-cooled fast reactor safety programs in the United States, and presents an overview of fuel safety performance as observed in laboratory and in-pile tests.« less
A review of inherent safety characteristics of metal alloy sodium-cooled fast reactor fuel against postulated accidents

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sofu, Tanju

2015-04-01

The thermal, mechanical, and neutronic performance of the metal alloy fast reactor fuel design complements the safety advantages of the liquid metal cooling and the pool-type primary system. Together, these features provide large safety margins in both normal operating modes and for a wide range of postulated accidents. In particular, they maximize the measures of safety associated with inherent reactor response to unprotected, double-fault accidents, and to minimize risk to the public and plant investment. High thermal conductivity and high gap conductance play the most significant role in safety advantages of the metallic fuel, resulting in a flatter radial temperaturemore » profile within the pin and much lower normal operation and transient temperatures in comparison to oxide fuel. Despite the big difference in melting point, both oxide and metal fuels have a relatively similar margin to melting during postulated accidents. When the metal fuel cladding fails, it typically occurs below the coolant boiling point and the damaged fuel pins remain cool-able. Metal fuel is compatible with sodium coolant, eliminating the potential of energetic fuel coolant reactions and flow blockages. All these, and the low retained heat leading to a longer grace period for operator action, are significant contributing factors to the inherently benign response of metallic fuel to postulated accidents. This paper summarizes the past analytical and experimental results obtained in past sodium-cooled fast reactor safety programs in the United States, and presents an overview of fuel safety performance as observed in laboratory and in-pile tests.« less
Comparison of a Traditional Probabilistic Risk Assessment Approach with Advanced Safety Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L; Mandelli, Diego; Zhegang Ma

2014-11-01

As part of the Light Water Sustainability Program (LWRS) [1], the purpose of the Risk Informed Safety Margin Characterization (RISMC) [2] Pathway research and development (R&D) is to support plant decisions for risk-informed margin management with the aim to improve economics, reliability, and sustain safety of current NPPs. In this paper, we describe the RISMC analysis process illustrating how mechanistic and probabilistic approaches are combined in order to estimate a safety margin. We use the scenario of a “station blackout” (SBO) wherein offsite power and onsite power is lost, thereby causing a challenge to plant safety systems. We describe themore » RISMC approach, illustrate the station blackout modeling, and contrast this with traditional risk analysis modeling for this type of accident scenario. We also describe our approach we are using to represent advanced flooding analysis.« less
Incidence of ineffective safety margin testing (<10 J) and efficacy of routine subcutaneous array insertion during implantable cardioverter defibrillator implantation.

PubMed

Ohlow, Marc-Alexander; Roos, Marcus; Lauer, Bernward; Geller, J Christoph

2016-01-01

The purpose of this study was to assess (1) the incidence of safety margin testing <10 J (SMT) and (2) the efficacy/safety of routinely adding a subcutaneous array (SQA) (Medtronic 6996SQ) for these patients. Patients with SMT smaller than a 10-J safety margin from maximum output were considered to have very high readings and underwent SQA insertion. These patients were compared with the rest of the patients who had acceptable SMT (≥10 J). A total of 616 patients underwent ICD implantation during the analysis period. Of those, 16 (2.6%) had SMT <10 J. By univariate analysis, younger age, and non-ischemic cardiomyopathy, were all significant predictors of SMT <10 J (p < 0.05). In all 16 cases, other methods to improve SMT prior to array insertion were attempted but failed for all patients: reversing shock polarity (n = 15), removing the superior vena cava coil (n = 14), reprogramming shock waveform (n = 9), and repositioning right ventricular lead (n = 9). Addition of the SQA successfully increased SMT to within safety margin for all patients (32 ± 2 versus 21 ± 3 J; p < 0.001). Follow-up (mean 48.1 ± 21 months) was available for all patients with SQA, only 2 cases with inappropriate shocks due to atrial fibrillation had to be noted. None of the patients experienced complications due to SQA implantation. SMT <10 J occur in about 2.6% of patients undergoing ICD implantation. SQA insertion corrects this problem without procedural/mid-term complications. Copyright © 2016 Indian Heart Rhythm Society. Production and hosting by Elsevier B.V. All rights reserved.
Estimation Of TMDLs And Margin Of Safety Under Conditions Of Uncertainty

EPA Science Inventory

In TMDL development, an adequate margin of safety (MOS) is required in the calculation process to provide a cushion needed because of uncertainties in the data and analysis. Current practices, however, rarely factor analysis' uncertainty in TMDL development and the MOS is largel...

The Development of Dynamic Human Reliability Analysis Simulations for Inclusion in Risk Informed Safety Margin Characterization Frameworks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeffrey C. Joe; Diego Mandelli; Ronald L. Boring

2015-07-01

The United States Department of Energy is sponsoring the Light Water Reactor Sustainability program, which has the overall objective of supporting the near-term and the extended operation of commercial nuclear power plants. One key research and development (R&D) area in this program is the Risk-Informed Safety Margin Characterization pathway, which combines probabilistic risk simulation with thermohydraulic simulation codes to define and manage safety margins. The R&D efforts to date, however, have not included robust simulations of human operators, and how the reliability of human performance or lack thereof (i.e., human errors) can affect risk-margins and plant performance. This paper describesmore » current and planned research efforts to address the absence of robust human reliability simulations and thereby increase the fidelity of simulated accident scenarios.« less
Effect of Neutron Absorbers Mixed in or Coating the Fuel of a 1-MWt Lithium-Cooled Space Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Amiri, Benjamin W.; Los Alamos National Laboratory, Los Alamos, NM 87545; Poston, David I.

2005-02-06

The goal of this study was to determine the effect of various neutron poisons (boron, dysprosium, erbium, and gadolinium) on a 1-MWt, lithium-cooled liquid-metal reactor. The isotopes were considered to be in-fuel poisons, as well as poisons coating the fuel. One way to quantify the effectiveness of a poison in meeting accident-condition requirements is by defining the safety margin as the difference between keff at the beginning of life and keff during the accident scenarios. The isotope that showed the most potential in increasing the safety margin for the wet-sand/water case was 157Gd. The safety margin was 10%-20% greater usingmore » 157Gd as an in-fuel poison as opposed to a coating, depending on the poison quantity. However, the most limiting condition (i.e., the accident scenario with the highest keff, thus the lowest safety margin) is when the reactor is submerged in wet sand. None of the isotopes considered significantly affected the safety margin for the dry-sand case. However, the poison isotopes considered may have applicability for meeting the wet-sand/water keff requirements or as burnable poisons in a moderated system. The views expressed in this document are those of the author and do not necessarily reflect agreement by the government.« less
Test and model correlation of the atmospheric emission photometric imager fiberglass pedestal

NASA Technical Reports Server (NTRS)

Lee, H. M., III; Barker, L. A.

1990-01-01

The correlation is presented of the static loads testing and finite element modeling for the fiberglass pedestal used on the Atmospheric Emission Photometric Imaging (AEPI) experiment. This payload is to be launched in the space shuttle as part of the ATLAS-1 experiment. Strain gauge data from rosettes around the highly loaded base are compared to the same load case run for the Spacelab 1 testing done in 1981. Correlation of the model and test data was accomplished through comparison of the composite stress invariant using the expected flight loads for the ATLAS-1 mission. Where appropriate, the Tsai-Wu failure criteria was used in the development of the key margins of safety. Margins of safety are all positive for the pedestal and are reported.
Generalized Tumor Dose for Treatment Planning Decision Support

NASA Astrophysics Data System (ADS)

Zuniga, Areli A.

Modern radiation therapy techniques allow for improved target conformity and normal tissue sparing. These highly conformal treatment plans have allowed dose escalation techniques increasing the probability of tumor control. At the same time this conformation has introduced inhomogeneous dose distributions, making delivered dose characterizations more difficult. The concept of equivalent uniform dose (EUD) characterizes a heterogeneous dose distribution within irradiated structures as a single value and has been used in biologically based treatment planning (BBTP); however, there are no substantial validation studies on clinical outcome data supporting EUD's use and therefore has not been widely adopted as decision-making support. These highly conformal treatment plans have also introduced the need for safety margins around the target volume. These margins are designed to minimize geometrical misses, and to compensate for dosimetric and treatment delivery uncertainties. The margin's purpose is to reduce the chance of tumor recurrence. This dissertation introduces a new EUD formulation designed especially for tumor volumes, called generalized Tumor Dose (gTD). It also investigates, as a second objective, margins extensions for potential improvements in local control while maintaining or minimizing toxicity. The suitability of gTD to rank LC was assessed by means of retrospective studies in a head and neck (HN) squamous cell carcinoma (SCC) and non-small cell lung cancer (NSCLC) cohorts. The formulation was optimized based on two datasets (one of each type) and then, model validation was assessed on independent cohorts. The second objective of this dissertation was investigated by ranking the probability of LC of the primary disease adding different margin sizes. In order to do so, an already published EUD formula was used retrospectively in a HN and a NSCLC datasets. Finally, recommendations for the viability to implement this new formulation into a routine treatment planning process as well as the revision of safety margins to improve local tumor control maximizing normal tissue sparing in SCC of the HN and NSCLC are discussed.
Increasing Safety of a Robotic System for Inner Ear Surgery Using Probabilistic Error Modeling Near Vital Anatomy

PubMed Central

Dillon, Neal P.; Siebold, Michael A.; Mitchell, Jason E.; Blachon, Gregoire S.; Balachandran, Ramya; Fitzpatrick, J. Michael; Webster, Robert J.

2017-01-01

Safe and effective planning for robotic surgery that involves cutting or ablation of tissue must consider all potential sources of error when determining how close the tool may come to vital anatomy. A pre-operative plan that does not adequately consider potential deviations from ideal system behavior may lead to patient injury. Conversely, a plan that is overly conservative may result in ineffective or incomplete performance of the task. Thus, enforcing simple, uniform-thickness safety margins around vital anatomy is insufficient in the presence of spatially varying, anisotropic error. Prior work has used registration error to determine a variable-thickness safety margin around vital structures that must be approached during mastoidectomy but ultimately preserved. In this paper, these methods are extended to incorporate image distortion and physical robot errors, including kinematic errors and deflections of the robot. These additional sources of error are discussed and stochastic models for a bone-attached robot for otologic surgery are developed. An algorithm for generating appropriate safety margins based on a desired probability of preserving the underlying anatomical structure is presented. Simulations are performed on a CT scan of a cadaver head and safety margins are calculated around several critical structures for planning of a robotic mastoidectomy. PMID:29200595
Increasing safety of a robotic system for inner ear surgery using probabilistic error modeling near vital anatomy

NASA Astrophysics Data System (ADS)

Dillon, Neal P.; Siebold, Michael A.; Mitchell, Jason E.; Blachon, Gregoire S.; Balachandran, Ramya; Fitzpatrick, J. Michael; Webster, Robert J.

2016-03-01

Safe and effective planning for robotic surgery that involves cutting or ablation of tissue must consider all potential sources of error when determining how close the tool may come to vital anatomy. A pre-operative plan that does not adequately consider potential deviations from ideal system behavior may lead to patient injury. Conversely, a plan that is overly conservative may result in ineffective or incomplete performance of the task. Thus, enforcing simple, uniform-thickness safety margins around vital anatomy is insufficient in the presence of spatially varying, anisotropic error. Prior work has used registration error to determine a variable-thickness safety margin around vital structures that must be approached during mastoidectomy but ultimately preserved. In this paper, these methods are extended to incorporate image distortion and physical robot errors, including kinematic errors and deflections of the robot. These additional sources of error are discussed and stochastic models for a bone-attached robot for otologic surgery are developed. An algorithm for generating appropriate safety margins based on a desired probability of preserving the underlying anatomical structure is presented. Simulations are performed on a CT scan of a cadaver head and safety margins are calculated around several critical structures for planning of a robotic mastoidectomy.
Comparing the Affordable Care Act's Financial Impact on Safety-Net Hospitals in States That Expanded Medicaid and Those That Did Not.

PubMed

Dobson, Allen; DaVanzo, Joan E; Haught, Randy; Phap-Hoa, Luu

2017-11-01

Safety-net hospitals play a vital role in delivering health care to Medicaid enrollees, the uninsured, and other vulnerable patients. By reducing the number of uninsured Americans, the Affordable Care Act (ACA) was also expected to lower these hospitals’ significant uncompensated care costs and shore up their financial stability. To examine how the ACA’s Medicaid expansion affected the financial status of safety-net hospitals in states that expanded Medicaid and in states that did not. Using Medicare hospital cost reports for federal fiscal years 2012 and 2015, the authors compared changes in Medicaid inpatient days as a percentage of total inpatient days, Medicaid revenues as a percentage of total net patient revenues, uncompensated care costs as a percentage of total operating costs, and hospital operating margins. Medicaid expansion had a significant, favorable financial impact on safety-net hospitals. From 2012 to 2015, safety-net hospitals in expansion states, compared to those in nonexpansion states, experienced larger increases in Medicaid inpatient days and Medicaid revenues as well as reduced uncompensated care costs. These changes improved operating margins for safety-net hospitals in expansion states. Margins for safety-net hospitals in nonexpansion states, meanwhile, declined.
The flammability of lip, face and hair preparations in the presence of 100% oxygen.

DOT National Transportation Integrated Search

1963-11-01

The effects of high concentrations and pressures of oxygen and static sparks upon lip, face and hair preparations were determined because of questions that frequently arise and apprehension that exists. A wide margin of safety was found for their use...
National Defense on the High Frontier.

ERIC Educational Resources Information Center

Graham, Daniel O.

1983-01-01

A new American defense policy based on satellites which can track down and destroy Soviet missiles is less expensive and more workable than is commonly believed. Such a policy would provide a greater margin of safety than the present policy of deterence based on mutually assured destruction. (IS)
Robust Adaptation? Assessing the sensitivity of safety margins in flood defences to uncertainty in future simulations - a case study from Ireland.

NASA Astrophysics Data System (ADS)

Murphy, Conor; Bastola, Satish; Sweeney, John

2013-04-01

Climate change impact and adaptation assessments have traditionally adopted a 'top-down' scenario based approach, where information from different Global Climate Models (GCMs) and emission scenarios are employed to develop impacts led adaptation strategies. Due to the tradeoffs in the computational cost and need to include a wide range of GCMs for fuller characterization of uncertainties, scenarios are better used for sensitivity testing and adaptation options appraisal. One common approach to adaptation that has been defined as robust is the use of safety margins. In this work the sensitivity of safety margins that have been adopted by the agency responsible for flood risk management in Ireland, to the uncertainty in future projections are examined. The sensitivity of fluvial flood risk to climate change is assessed for four Irish catchments using a large number of GCMs (17) forced with three emissions scenarios (SRES A1B, A2, B1) as input to four hydrological models. Both uncertainty within and between hydrological models is assessed using the GLUE framework. Regionalisation is achieved using a change factor method to infer changes in the parameters of a weather generator using monthly output from the GCMs, while flood frequency analysis is conducted using the method of probability weighted moments to fit the Generalised Extreme Value distribution to ~20,000 annual maxima series. The sensitivity of design margins to the uncertainty space considered is visualised using risk response surfaces. The hydrological sensitivity is measured as the percentage change in flood peak for specified recurrence intervals. Results indicate that there is a considerable residual risk associated with allowances of +20% when uncertainties are accounted for and that the risk of exceedence of design allowances is greatest for more extreme, low frequency events with considerable implication for critical infrastructure, e.g., culverts, bridges, flood defences whose designs are normally associated with such return periods. Sensitivity results show that the impact of climate change is not as great for flood peaks with higher return periods. The average width of the uncertainty range and the size of the range for each catchment reveals that the uncertainties in low frequency events are greater than high frequency events. In addition, the uncertainty interval, estimated as the average width of the uncertainty range of flow for the five return periods, grows wider with a decrease in the runoff coefficient and wetness index of each catchment, both of which tend to increase the nonlinearity in the rainfall response. A key management question that emerges is the acceptability of residual risk where high exposure of vulnerable populations and/or critical infrastructure coincide with high costs of additional capacity in safety margins.
A soft-contact model for computing safety margins in human prehension.

PubMed

Singh, Tarkeshwar; Ambike, Satyajit

2017-10-01

The soft human digit tip forms contact with grasped objects over a finite area and applies a moment about an axis normal to the area. These moments are important for ensuring stability during precision grasping. However, the contribution of these moments to grasp stability is rarely investigated in prehension studies. The more popular hard-contact model assumes that the digits exert a force vector but no free moment on the grasped object. Many sensorimotor studies use this model and show that humans estimate friction coefficients to scale the normal force to grasp objects stably, i.e. the smoother the surface, the tighter the grasp. The difference between the applied normal force and the minimal normal force needed to prevent slipping is called safety margin and this index is widely used as a measure of grasp planning. Here, we define and quantify safety margin using a more realistic contact model that allows digits to apply both forces and moments. Specifically, we adapt a soft-contact model from robotics and demonstrate that the safety margin thus computed is a more accurate and robust index of grasp planning than its hard-contact variant. Previously, we have used the soft-contact model to propose two indices of grasp planning that show how humans account for the shape and inertial properties of an object. A soft-contact based safety margin offers complementary insights by quantifying how humans may account for surface properties of the object and skin tissue during grasp planning and execution. Copyright © 2017 Elsevier B.V. All rights reserved.
Hydraulic safety margins and embolism reversal in stems and leaves: Why are conifers and angiosperms so different?

Treesearch

Daniel M. Johnson; Katherine A. McCulloh; David R. Woodruff; Frederick C. Meinzer

2012-01-01

Angiosperm and coniferous tree species utilize a continuum of hydraulic strategies. Hydraulic safety margins (defined as differences between naturally occurring xylem pressures and pressures that would cause hydraulic dysfunction, or differences between pressures resulting in loss of hydraulic function in adjacent organs (e.g., stems vs. leaves) tend to be much greater...
Derivation of improved load transformation matrices for launchers-spacecraft coupled analysis, and direct computation of margins of safety

NASA Technical Reports Server (NTRS)

Klein, M.; Reynolds, J.; Ricks, E.

1989-01-01

Load and stress recovery from transient dynamic studies are improved upon using an extended acceleration vector in the modal acceleration technique applied to structural analysis. Extension of the normal LTM (load transformation matrices) stress recovery to automatically compute margins of safety is presented with an application to the Hubble space telescope.
Quantifying Safety Margin Using the Risk-Informed Safety Margin Characterization (RISMC)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grabaskas, David; Bucknor, Matthew; Brunett, Acacia

2015-04-26

The Risk-Informed Safety Margin Characterization (RISMC), developed by Idaho National Laboratory as part of the Light-Water Reactor Sustainability Project, utilizes a probabilistic safety margin comparison between a load and capacity distribution, rather than a deterministic comparison between two values, as is usually done in best-estimate plus uncertainty analyses. The goal is to determine the failure probability, or in other words, the probability of the system load equaling or exceeding the system capacity. While this method has been used in pilot studies, there has been little work conducted investigating the statistical significance of the resulting failure probability. In particular, it ismore » difficult to determine how many simulations are necessary to properly characterize the failure probability. This work uses classical (frequentist) statistics and confidence intervals to examine the impact in statistical accuracy when the number of simulations is varied. Two methods are proposed to establish confidence intervals related to the failure probability established using a RISMC analysis. The confidence interval provides information about the statistical accuracy of the method utilized to explore the uncertainty space, and offers a quantitative method to gauge the increase in statistical accuracy due to performing additional simulations.« less
DOE Office of Scientific and Technical Information (OSTI.GOV)

Gougar, Hans

This document outlines the development of a high fidelity, best estimate nuclear power plant severe transient simulation capability that will complement or enhance the integral system codes historically used for licensing and analysis of severe accidents. As with other tools in the Risk Informed Safety Margin Characterization (RISMC) Toolkit, the ultimate user of Enhanced Severe Transient Analysis and Prevention (ESTAP) capability is the plant decision-maker; the deliverable to that customer is a modern, simulation-based safety analysis capability, applicable to a much broader class of safety issues than is traditional Light Water Reactor (LWR) licensing analysis. Currently, the RISMC pathway’s majormore » emphasis is placed on developing RELAP-7, a next-generation safety analysis code, and on showing how to use RELAP-7 to analyze margin from a modern point of view: that is, by characterizing margin in terms of the probabilistic spectra of the “loads” applied to systems, structures, and components (SSCs), and the “capacity” of those SSCs to resist those loads without failing. The first objective of the ESTAP task, and the focus of one task of this effort, is to augment RELAP-7 analyses with user-selected multi-dimensional, multi-phase models of specific plant components to simulate complex phenomena that may lead to, or exacerbate, severe transients and core damage. Such phenomena include: coolant crossflow between PWR assemblies during a severe reactivity transient, stratified single or two-phase coolant flow in primary coolant piping, inhomogeneous mixing of emergency coolant water or boric acid with hot primary coolant, and water hammer. These are well-documented phenomena associated with plant transients but that are generally not captured in system codes. They are, however, generally limited to specific components, structures, and operating conditions. The second ESTAP task is to similarly augment a severe (post-core damage) accident integral analyses code with high fidelity simulations that would allow investigation of multi-dimensional, multi-phase containment phenomena that are only treated approximately in established codes.« less
Predictors of Payer Mix and Financial Performance Among Safety Net Hospitals Prior to the Affordable Care Act.

PubMed

Sommers, Benjamin D; Stone, Juliana; Kane, Nancy

2016-01-01

The objective of this study was to use audited hospital financial statements to identify predictors of payer mix and financial performance in safety net hospitals prior to the Affordable Care Act. We analyzed the 2010 financial statements of 98 large, urban safety net hospital systems in 34 states, supplemented with data on population demographics, hospital features, and state policies. We used multivariate regression to identify independent predictors of three outcomes: 1) Medicaid-reliant payer mix (hospitals for which at least 25% of hospital days are paid for by Medicaid); 2) safety net revenue-to-cost ratio (Medicaid and Medicare Disproportionate Share Hospital payments and local government transfers, divided by charity care costs and Medicaid payment shortfall); and 3) operating margin. Medicaid-reliant payer mix was positively associated with more inclusive state Medicaid eligibility criteria and more minority patients. More inclusive Medicaid eligibility and higher Medicaid reimbursement rates positively predicted safety net revenue-to-cost ratio. University governance was the strongest positive predictor of operating margin. Safety net hospital financial performance varied considerably. Academic hospitals had higher operating margins, while more generous Medicaid eligibility and reimbursement policies improved hospitals' ability to recoup costs. Institutional and state policies may outweigh patient demographics in the financial health of safety net hospitals. © The Author(s) 2015.
Medical abortion: understanding perspectives of rural and marginalized women from rural South India.

PubMed

Sri, B Subha; Ravindran, T K Sundari

2012-09-01

To understand how rural and other groups of marginalized women define safe abortion; their perspectives and concerns regarding medical abortion (MA); and what factors affect their access to safe abortion. Focus group discussions were held with various groups of rural and marginalized women in Tamil Nadu to understand their perspectives and concerns on abortion, especially MA. Nearly a decade after mifepristone was approved for abortion in India, most study participants had never heard of MA. When they learned of the method, most preferred it over other methods of abortion. The women also had questions and concerns about the method and recommendations on how services should be provided. Their definition of a "safe abortion" included criteria beyond medical safety. They placed a high priority on "social safety," including confidentiality and privacy. In their view, factors affecting access to safe abortion and choice of provider included cost, assurance of secrecy, promptness of service provision, and absence of provider gatekeeping and provider-imposed conditions for receiving services. Women's preference for MA shows the potential of this technology to address the problem of unsafe abortion in India. Women need better access to information and services to realize this potential, however. Women's preferences regarding information dissemination and service provision need to be taken into account if policies and programs are to be truly responsive to the needs of marginalized women. Copyright © 2012. Published by Elsevier Ireland Ltd.
Chronic warm exposure impairs growth performance and reduces thermal safety margins in the common triplefin fish (Forsterygion lapillum).

PubMed

McArley, Tristan J; Hickey, Anthony J R; Herbert, Neill A

2017-10-01

Intertidal fish species face gradual chronic changes in temperature and greater extremes of acute thermal exposure through climate-induced warming. As sea temperatures rise, it has been proposed that whole-animal performance will be impaired through oxygen and capacity limited thermal tolerance [OCLTT; reduced aerobic metabolic scope (MS)] and, on acute exposure to high temperatures, thermal safety margins may be reduced because of constrained acclimation capacity of upper thermal limits. Using the New Zealand triplefin fish ( Forsterygion lapillum ), this study addressed how performance in terms of growth and metabolism (MS) and upper thermal tolerance limits would be affected by chronic exposure to elevated temperature. Growth was measured in fish acclimated (12 weeks) to present and predicted future temperatures and metabolic rates were then determined in fish at acclimation temperatures and with acute thermal ramping. In agreement with the OCLTT hypothesis, chronic exposure to elevated temperature significantly reduced growth performance and MS. However, despite the prospect of impaired growth performance under warmer future summertime conditions, an annual growth model revealed that elevated temperatures may only shift the timing of high growth potential and not the overall annual growth rate. While the upper thermal tolerance (i.e. critical thermal maxima) increased with exposure to warmer temperatures and was associated with depressed metabolic rates during acute thermal ramping, upper thermal tolerance did not differ between present and predicted future summertime temperatures. This suggests that warming may progressively decrease thermal safety margins for hardy generalist species and could limit the available habitat range of intertidal populations. © 2017. Published by The Company of Biologists Ltd.
Utilization of cone-beam CT for offline evaluation of target volume coverage during prostate image-guided radiotherapy based on bony anatomy alignment.

PubMed

Paluska, Petr; Hanus, Josef; Sefrova, Jana; Rouskova, Lucie; Grepl, Jakub; Jansa, Jan; Kasaova, Linda; Hodek, Miroslav; Zouhar, Milan; Vosmik, Milan; Petera, Jiri

2012-01-01

To assess target volume coverage during prostate image-guided radiotherapy based on bony anatomy alignment and to assess possibility of safety margin reduction. Implementation of IGRT should influence safety margins. Utilization of cone-beam CT provides current 3D anatomic information directly in irradiation position. Such information enables reconstruction of the actual dose distribution. Seventeen prostate patients were treated with daily bony anatomy image-guidance. Cone-beam CT (CBCT) scans were acquired once a week immediately after bony anatomy alignment. After the prostate, seminal vesicles, rectum and bladder were contoured, the delivered dose distribution was reconstructed. Target dose coverage was evaluated by the proportion of the CTV encompassed by the 95% isodose. Original plans employed a 1 cm safety margin. Alternative plans assuming a smaller 7 mm margin between CTV and PTV were evaluated in the same way. Rectal and bladder volumes were compared with the initial ones. Rectal and bladder volumes irradiated with doses higher than 75 Gy, 70 Gy, 60 Gy, 50 Gy and 40 Gy were analyzed. In 12% of reconstructed plans the prostate coverage was not sufficient. The prostate underdosage was observed in 5 patients. Coverage of seminal vesicles was not satisfactory in 3% of plans. Most of the target underdosage corresponded to excessive rectal or bladder filling. Evaluation of alternative plans assuming a smaller 7 mm margin revealed 22% and 11% of plans where prostate and seminal vesicles coverage, respectively, was compromised. These were distributed over 8 and 7 patients, respectively. Sufficient dose coverage of target volumes was not achieved for all patients. Reducing of safety margin is not acceptable. Initial rectal and bladder volumes cannot be considered representative for subsequent treatment.
Co-ordination of growth, gas exchange and hydraulics define the carbon safety margin in tree species with contrasting drought strategies.

PubMed

Mitchell, P J; O'Grady, A P; Tissue, D T; Worledge, D; Pinkard, E A

2014-05-01

Gas exchange, growth, water transport and carbon (C) metabolism diminish during drought according to their respective sensitivities to declining water status. The timing of this sequence of declining physiological functions may determine how water and C relations compromise plant survival. In this paper, we test the hypothesis that the degree of asynchrony between declining C supply (photosynthesis) and C demand (growth and respiration) determines the rate and magnitude of changes in whole-plant non-structural carbohydrates (NSC) during drought. Two complementary experiments using two tree species (Eucalyptus globulus Labill. and Pinus radiata D. Don) with contrasting drought response strategies were performed to (i) assess changes in radial stem growth, transpiration, leaf water potential and gas exchange in response to chronic drought, and (ii) evaluate the concomitant impacts of these drought responses on the temporal patterns of NSC during terminal drought. The three distinct phases of water stress were delineated by thresholds of growth cessation and stomatal closure that defined the 'carbon safety margin' (i.e., the difference between leaf water potential when growth is zero and leaf water potential when net photosynthesis is zero). A wider C safety margin in E. globulus was defined by an earlier cessation of growth relative to photosynthesis that reduced the demand for NSC while maintaining C acquisition. By contrast, the narrower C safety margin in P. radiata was characterized by a synchronous decline in growth and photosynthesis, whereby growth continued under a declining supply of NSC from photosynthesis. The narrower C safety margin in P. radiata was associated with declines in starch concentrations after ∼ 90 days of chronic drought and significant depletion of starch in all organs at mortality. The observed divergence in the sensitivity of drought responses is indicative of a potential trade-off between maintaining hydraulic safety and adequate C availability. © The Author 2014. Published by Oxford University Press. All rights reserved.

Margins of safety provided by COSHH Essentials and the ILO Chemical Control Toolkit.

PubMed

Jones, Rachael M; Nicas, Mark

2006-03-01

COSHH Essentials, developed by the UK Health and Safety Executive, and the Chemical Control Toolkit (Toolkit) proposed by the International Labor Organization, are 'control banding' approaches to workplace risk management intended for use by proprietors of small and medium-sized businesses. Both systems group chemical substances into hazard bands based on toxicological endpoint and potency. COSSH Essentials uses the European Union's Risk-phrases (R-phrases), whereas the Toolkit uses R-phrases and the Globally Harmonized System (GHS) of Classification and Labeling of Chemicals. Each hazard band is associated with a range of airborne concentrations, termed exposure bands, which are to be attained by the implementation of recommended control technologies. Here we analyze the margin of safety afforded by the systems and, for each hazard band, define the minimal margin as the ratio of the minimum airborne concentration that produced the toxicological endpoint of interest in experimental animals to the maximum concentration in workplace air permitted by the exposure band. We found that the minimal margins were always <100, with some ranging to <1, and inversely related to molecular weight. The Toolkit-GHS system generally produced margins equal to or larger than COSHH Essentials, suggesting that the Toolkit-GHS system is more protective of worker health. Although, these systems predict exposures comparable with current occupational exposure limits, we argue that the minimal margins are better indicators of health protection. Further, given the small margins observed, we feel it is important that revisions of these systems provide the exposure bands to users, so as to permit evaluation of control technology capture efficiency.
Nuclear power: Siting and safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Openshaw, S.

1986-01-01

By 2030, half, or even two-thirds, of all electricity may be generated by nuclear power. Major reactor accidents are still expected to be rare occurrences, but nuclear safety is largely a matter of faith. Terrorist attacks, sabotage, and human error could cause a significant accident. Reactor siting can offer an additional, design-independent margin of safety. Remote geographical sites for new plants would minimize health risks, protect the industry from negative changes in public opinion concerning nuclear energy, and improve long-term public acceptance of nuclear power. U.K. siting practices usually do not consider the contribution to safety that could be obtainedmore » from remote sites. This book discusses the present trends of siting policies of nuclear power and their design-independent margin of safety.« less
Coordination of xylem hydraulics and stomatal regulation in keeping the integrity of xylem water transport in shoots of two compound-leaved tree species.

PubMed

Liu, Yan-Yan; Song, Jia; Wang, Miao; Li, Na; Niu, Cun-Yang; Hao, Guang-You

2015-12-01

Hydraulic segmentation between proximal and distal organs has been hypothesized to be an important protective mechanism for plants to minimize the detrimental effects of drought-induced hydraulic failure. Uncertainties still exist regarding the degree of segmentation and the role of stomatal regulation in keeping hydraulic integrity of organs at different hierarchies. In the present study, we measured hydraulic conductivity and vulnerability in stems, compound leaf petioles and leaflet laminas of Fraxinus mandshurica Rupr. and Juglans mandshurica Maxim. growing in Changbai Mountain of Northeast China to identify the main locality where hydraulic segmentation occurs along the shoot water transport pathway. Stomatal conductance in response to leaf water potential change was also measured to investigate the role of stomatal regulation in avoiding extensive transpiration-induced embolism. No major contrasts were found between stems and compound leaf petioles in either hydraulic conductivity or vulnerability to drought-induced embolism, whereas a large difference in hydraulic vulnerability exists between compound leaf petioles and leaflet laminas. Furthermore, in contrast to the relatively large safety margins in stems (4.13 and 2.04 MPa) and compound leaf petioles (1.33 and 1.93 MPa), leaflet lamina hydraulic systems have substantially smaller or even negative safety margins (-0.17 and 0.47 MPa) in F. mandshurica and J. mandshurica. Under unstressed water conditions, gas exchange may be better optimized by allowing leaflet vascular system function with small safety margins. In the meantime, hydraulic safety of compound leaf petioles and stems are guaranteed by their large safety margins. In facing severe drought stress, larger safety margins in stems than in compound leaf petioles would allow plants to minimize the risk of catastrophic embolism in stems by sacrificing the whole compound leaves. A strong coordination between hydraulic and stomatal regulation appears to play a critical role in balancing the competing efficiency and safety requirements for xylem water transport and use in plants. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
Real-world effects of using a phone while driving on lateral and longitudinal control of vehicles.

PubMed

Dozza, Marco; Flannagan, Carol A C; Sayer, James R

2015-12-01

Technologies able to augment human communication, such as smartphones, are increasingly present during all daily activities. Their use while driving, in particular, is of great potential concern, because of the high risk that distraction poses during this activity. Current countermeasures to distraction from phone use are considerably different across countries and not always widely accepted/adopted by the drivers. This study utilized naturalistic driving data collected from 108 drivers in the Integrated Vehicle-Based Safety Systems (IVBSS) program in 2009 and 2010 to assess the extent to which using a phone changes lateral or longitudinal control of a vehicle. The IVBSS study included drivers from three age groups: 20–30 (younger), 40–50 (middle-aged), and 60–70 (older). Results from this study show that younger drivers are more likely to use a phone while driving than older and middle-aged drivers. Furthermore, younger drivers exhibited smaller safety margins while using a phone. Nevertheless, younger drivers did not experience more severe lateral/longitudinal threats than older and middle-aged drivers, probably because of faster reaction times. While manipulating the phone (i.e., dialing, texting), drivers exhibited larger lateral safety margins and experienced less severe lateral threats than while conversing on the phone. Finally, longitudinal threats were more critical soon after phone interaction, suggesting that drivers terminate phone interactions when driving becomes more demanding. These findings suggest that drivers are aware of the potential negative effect of phone use on their safety. This awareness guides their decision to engage/disengage in phone use and to increase safety margins (self-regulation). This compensatory behavior may be a natural countermeasure to distraction that is hard to measure in controlled studies. Practical Applications: Intelligent systems able to amplify this natural compensatory behavior may become a widely accepted/adopted countermeasure to the potential distraction from phone operation while driving.
Negative Stress Margins - Are They Real?

NASA Technical Reports Server (NTRS)

Raju, Ivatury S.; Lee, Darlene S.; Mohaghegh, Michael

2011-01-01

Advances in modeling and simulation, new finite element software, modeling engines and powerful computers are providing opportunities to interrogate designs in a very different manner and in a more detailed approach than ever before. Margins of safety are also often evaluated using local stresses for various design concepts and design parameters quickly once analysis models are defined and developed. This paper suggests that not all the negative margins of safety evaluated are real. The structural areas where negative margins are frequently encountered are often near stress concentrations, point loads and load discontinuities, near locations of stress singularities, in areas having large gradients but with insufficient mesh density, in areas with modeling issues and modeling errors, and in areas with connections and interfaces, in two-dimensional (2D) and three-dimensional (3D) transitions, bolts and bolt modeling, and boundary conditions. Now, more than ever, structural analysts need to examine and interrogate their analysis results and perform basic sanity checks to determine if these negative margins are real.
Margin of Safety Definition and Examples Used in Safety Basis Documents and the USQ Process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Beaulieu, R. A.

The Nuclear Safety Management final rule, 10 CFR 830, provides an undefined term, margin of safety (MOS). Safe harbors listed in 10 CFR 830, Table 2, such as DOE-STD-3009 use but do not define the term. This lack of definition has created the need for the definition. This paper provides a definition of MOS and documents examples of MOS as applied in a U.S. Department of Energy (DOE) approved safety basis for an existing nuclear facility. If we understand what MOS looks like regarding Technical Safety Requirements (TSR) parameters, then it helps us compare against other parameters that do notmore » involve a MOS. This paper also documents parameters that are not MOS. These criteria could be used to determine if an MOS exists in safety basis documents. This paper helps DOE, including the National Nuclear Security Administration (NNSA) and its contractors responsible for the safety basis improve safety basis documents and the unreviewed safety question (USQ) process with respect to MOS.« less
The STAT7 Code for Statistical Propagation of Uncertainties In Steady-State Thermal Hydraulics Analysis of Plate-Fueled Reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dunn, Floyd E.; Hu, Lin-wen; Wilson, Erik

The STAT code was written to automate many of the steady-state thermal hydraulic safety calculations for the MIT research reactor, both for conversion of the reactor from high enrichment uranium fuel to low enrichment uranium fuel and for future fuel re-loads after the conversion. A Monte-Carlo statistical propagation approach is used to treat uncertainties in important parameters in the analysis. These safety calculations are ultimately intended to protect against high fuel plate temperatures due to critical heat flux or departure from nucleate boiling or onset of flow instability; but additional margin is obtained by basing the limiting safety settings onmore » avoiding onset of nucleate boiling. STAT7 can simultaneously analyze all of the axial nodes of all of the fuel plates and all of the coolant channels for one stripe of a fuel element. The stripes run the length of the fuel, from the bottom to the top. Power splits are calculated for each axial node of each plate to determine how much of the power goes out each face of the plate. By running STAT7 multiple times, full core analysis has been performed by analyzing the margin to ONB for each axial node of each stripe of each plate of each element in the core.« less
Laser and high-frequency cauthery gingivectomy in nonperiodontal indications: assessment and comparison of techniques

NASA Astrophysics Data System (ADS)

Bartak, Petr; Smucler, Roman

2003-06-01

The authors have verified the efficiency and safety of laser and high-frequency gingivectomy in non-periodontal indications. Within a prospective, non-selective study, they treated and monitored 357 dental areas in 139 teeth.Out of the total number, 248 areas were treated wtih a diode laser, 980nm; 109 areas with high-frequency electrocautery. The following parameters were monitored: a) regeneration of the marginal gingiva; b) generation of iatrogenic recessions or periodontal pockets; c) bleeding from gingival sulcus during probing; d) changes in tooth vitality; e) patient's subjective evaluation. The authors identified a high degree of safety in both laser and high-frequency gingivectomy, with no significant difference between these two methods. Laser gingivectomy appears to have a wider indication range, while high-frequency gingivectomy requires lower financial expenses.
Prediction of Safety Margin and Optimization of Dosing Protocol for a Novel Antibiotic using Quantitative Systems Pharmacology Modeling.

PubMed

Woodhead, Jeffrey L; Paech, Franziska; Maurer, Martina; Engelhardt, Marc; Schmitt-Hoffmann, Anne H; Spickermann, Jochen; Messner, Simon; Wind, Mathias; Witschi, Anne-Therese; Krähenbühl, Stephan; Siler, Scott Q; Watkins, Paul B; Howell, Brett A

2018-06-07

Elevations of liver enzymes have been observed in clinical trials with BAL30072, a novel antibiotic. In vitro assays have identified potential mechanisms for the observed hepatotoxicity, including electron transport chain (ETC) inhibition and reactive oxygen species (ROS) generation. DILIsym, a quantitative systems pharmacology (QSP) model of drug-induced liver injury, has been used to predict the likelihood that each mechanism explains the observed toxicity. DILIsym was also used to predict the safety margin for a novel BAL30072 dosing scheme; it was predicted to be low. DILIsym was then used to recommend potential modifications to this dosing scheme; weight-adjusted dosing and a requirement to assay plasma alanine aminotransferase (ALT) daily and stop dosing as soon as ALT increases were observed improved the predicted safety margin of BAL30072 and decreased the predicted likelihood of severe injury. This research demonstrates a potential application for QSP modeling in improving the safety profile of candidate drugs. © 2018 The Authors. Clinical and Translational Science published by Wiley Periodicals, Inc. on behalf of American Society for Clinical Pharmacology and Therapeutics.
A theory and model of conflict detection in air traffic control: incorporating environmental constraints.

PubMed

Loft, Shayne; Bolland, Scott; Humphreys, Michael S; Neal, Andrew

2009-06-01

A performance theory for conflict detection in air traffic control is presented that specifies how controllers adapt decisions to compensate for environmental constraints. This theory is then used as a framework for a model that can fit controller intervention decisions. The performance theory proposes that controllers apply safety margins to ensure separation between aircraft. These safety margins are formed through experience and reflect the biasing of decisions to favor safety over accuracy, as well as expectations regarding uncertainty in aircraft trajectory. In 2 experiments, controllers indicated whether they would intervene to ensure separation between pairs of aircraft. The model closely predicted the probability of controller intervention across the geometry of problems and as a function of controller experience. When controller safety margins were manipulated via task instructions, the parameters of the model changed in the predicted direction. The strength of the model over existing and alternative models is that it better captures the uncertainty and decision biases involved in the process of conflict detection. (PsycINFO Database Record (c) 2009 APA, all rights reserved).
Patient engagement at the margins: Health care providers' assessments of engagement and the structural determinants of health in the safety-net.

PubMed

Fleming, Mark D; Shim, Janet K; Yen, Irene H; Thompson-Lastad, Ariana; Rubin, Sara; Van Natta, Meredith; Burke, Nancy J

2017-06-01

Increasing "patient engagement" has become a priority for health care organizations and policy-makers seeking to reduce cost and improve the quality of care. While concepts of patient engagement have proliferated rapidly across health care settings, little is known about how health care providers make use of these concepts in clinical practice. This paper uses 20 months of ethnographic and interview research carried out from 2015 to 2016 to explore how health care providers working at two public, urban, safety-net hospitals in the United States define, discuss, and assess patient engagement. We investigate how health care providers describe engagement for high cost patients-the "super-utilizers" of the health care system-who often face complex challenges related to socioeconomic marginalization including poverty, housing insecurity, exposure to violence and trauma, cognitive and mental health issues, and substance use. The health care providers in our study faced institutional pressure to assess patient engagement and to direct care towards engaged patients. However, providers considered such assessments to be highly challenging and oftentimes inaccurate, particularly because they understood low patient engagement to be the result of difficult socioeconomic conditions. Providers tried to navigate the demand to assess patient engagement in care by looking for explicit positive and negative indicators of engagement, while also being sensitive to more subtle and intuitive signs of engagement for marginalized patients. Copyright © 2017 Elsevier Ltd. All rights reserved.
Patient Engagement at the Margins: Health Care Providers’ Assessments of Engagement and the Structural Determinants of Health in the Safety-net

PubMed Central

Fleming, Mark D.; Shim, Janet K.; Yen, Irene; Thompson-Lastad, Ariana; Rubin, Sara; Van Natta, Meredith; Burke, Nancy J.

2017-01-01

Increasing “patient engagement” has become a priority for health care organizations and policy-makers seeking to reduce cost and improve the quality of care. While concepts of patient engagement have proliferated rapidly across health care settings, little is known about how health care providers make use of these concepts in clinical practice. This paper uses 20 months of ethnographic and interview research carried out from 2015 to 2016 to explore how health care providers working at two public, urban, safety-net hospitals in the United States define, discuss, and assess patient engagement. We investigate how health care providers describe engagement for high cost patients—the “super-utilizers” of the health care system—who often face complex challenges related to socioeconomic marginalization including poverty, housing insecurity, exposure to violence and trauma, cognitive and mental health issues, and substance use. The health care providers in our study faced institutional pressure to assess patient engagement and to direct care towards engaged patients. However, providers considered such assessments to be highly challenging and oftentimes inaccurate, particularly because they understood low patient engagement to be the result of difficult socioeconomic conditions. Providers tried to navigate the demand to assess patient engagement in care by looking for explicit positive and negative indicators of engagement, while also being sensitive to more subtle and intuitive signs of engagement for marginalized patients. PMID:28445806
Thermal-safety margins and the necessity of thermoregulatory behavior across latitude and elevation

PubMed Central

Sunday, Jennifer M.; Bates, Amanda E.; Kearney, Michael R.; Colwell, Robert K.; Dulvy, Nicholas K.; Longino, John T.; Huey, Raymond B.

2014-01-01

Physiological thermal-tolerance limits of terrestrial ectotherms often exceed local air temperatures, implying a high degree of thermal safety (an excess of warm or cold thermal tolerance). However, air temperatures can be very different from the equilibrium body temperature of an individual ectotherm. Here, we compile thermal-tolerance limits of ectotherms across a wide range of latitudes and elevations and compare these thermal limits both to air and to operative body temperatures (theoretically equilibrated body temperatures) of small ectothermic animals during the warmest and coldest times of the year. We show that extreme operative body temperatures in exposed habitats match or exceed the physiological thermal limits of most ectotherms. Therefore, contrary to previous findings using air temperatures, most ectotherms do not have a physiological thermal-safety margin. They must therefore rely on behavior to avoid overheating during the warmest times, especially in the lowland tropics. Likewise, species living at temperate latitudes and in alpine habitats must retreat to avoid lethal cold exposure. Behavioral plasticity of habitat use and the energetic consequences of thermal retreats are therefore critical aspects of species’ vulnerability to climate warming and extreme events. PMID:24616528
Evaluation of Margins of Safety in Brazed Joints

NASA Technical Reports Server (NTRS)

Flom, Yury; Wang, Len; Powell, Mollie M.; Soffa, Matthew A.; Rommel, Monica L.

2009-01-01

One of the essential steps in assuring reliable performance of high cost critical brazed structures is the assessment of the Margin of Safety (MS) of the brazed joints. In many cases the experimental determination of the failure loads by destructive testing of the brazed assembly is not practical and cost prohibitive. In such cases the evaluation of the MS is performed analytically by comparing the maximum design loads with the allowable ones and incorporating various safety or knock down factors imposed by the customer. Unfortunately, an industry standard methodology for the design and analysis of brazed joints has not been developed. This paper provides an example of an approach that was used to analyze an AlBeMet 162 (38%Be-62%Al) structure brazed with the AWS BAlSi-4 (Al-12%Si) filler metal. A practical and conservative interaction equation combining shear and tensile allowables was developed and validated to evaluate an acceptable (safe) combination of tensile and shear stresses acting in the brazed joint. These allowables are obtained from testing of standard tensile and lap shear brazed specimens. The proposed equation enables the assessment of the load carrying capability of complex brazed joints subjected to multi-axial loading.
Thermal-safety margins and the necessity of thermoregulatory behavior across latitude and elevation.

PubMed

Sunday, Jennifer M; Bates, Amanda E; Kearney, Michael R; Colwell, Robert K; Dulvy, Nicholas K; Longino, John T; Huey, Raymond B

2014-04-15

Physiological thermal-tolerance limits of terrestrial ectotherms often exceed local air temperatures, implying a high degree of thermal safety (an excess of warm or cold thermal tolerance). However, air temperatures can be very different from the equilibrium body temperature of an individual ectotherm. Here, we compile thermal-tolerance limits of ectotherms across a wide range of latitudes and elevations and compare these thermal limits both to air and to operative body temperatures (theoretically equilibrated body temperatures) of small ectothermic animals during the warmest and coldest times of the year. We show that extreme operative body temperatures in exposed habitats match or exceed the physiological thermal limits of most ectotherms. Therefore, contrary to previous findings using air temperatures, most ectotherms do not have a physiological thermal-safety margin. They must therefore rely on behavior to avoid overheating during the warmest times, especially in the lowland tropics. Likewise, species living at temperate latitudes and in alpine habitats must retreat to avoid lethal cold exposure. Behavioral plasticity of habitat use and the energetic consequences of thermal retreats are therefore critical aspects of species' vulnerability to climate warming and extreme events.
Correlation between safety climate and contractor safety assessment programs in construction

PubMed Central

Sparer, EH1; Murphy, LA; Taylor, KM; Dennerlein, Jt

2015-01-01

Background Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Methods 401 construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. Results There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers’ safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. Conclusions A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. PMID:24038403
Final stress analysis report ultraviolet spectrometer S169

NASA Technical Reports Server (NTRS)

Cooper, S.

1971-01-01

The stress analysis report verifies the structural integrity of the Apollo S-169 UV-spectrometer experiment. The methods by which the various members were analyzed are described. A detailed summary of results for the individual structural elements appears in the form of a table of minimum margins of safety. No negative margins of safety were experienced. It is concluded that the component structure is more than adequate to withstand the environmental load conditions given in the design criteria.
Scaled centrifugal compressor, collector and running gear program

NASA Technical Reports Server (NTRS)

Kenehan, J. G.

1983-01-01

The Scaled Centrifugal Compressor, Collector and Running gear Program was conducted in support of an overall NASA strategy to improve small-compressor performance, durability, and reliability while reducing initial and life-cycle costs. Accordingly, Garrett designed and provided a test rig, gearbox coupling, and facility collector for a new NASA facility, and provided a scaled model of an existing, high-performance impeller for evaluation scaling effects on aerodynamic performance and for obtaining other performance data. Test-rig shafting was designed to operate smoothly throughout a speed range up to 60,000 rpm. Pressurized components were designed to operate at pressures up to 300 psia and at temperatures to 1000 F. Nonrotating components were designed to provide a margin-of-safety of 0.05 or greater; rotating components, for a margin-of-safety based on allowable yield and ultimate strengths. Design activities were supported by complete design analysis, and the finished hardware was subjected to check-runs to confirm proper operation. The test rig will support a wide range of compressor tests and evaluations.
[Nitrates (V) in drinking water as factor of a health risk for people in Podlaskie Voivodship].

PubMed

Szczerbiński, Robert; Karczewski, Jan; Fiłon, Joanna

2006-01-01

The aim of this article was to evaluate of a health danger and to estimate the risk due to the presence of nitrates (V) in drinking water used by people in Podlaskie Voivodship. For research I used water specimens taken in 14 poviats (smaller administration districts) in Podlaskie Voivodship as part of drinking water quality monitoring in the years 2001-2003. Evaluation of danger of nitrates (V) taken in with drinking water by the population of Podlaskie Voivodship was carried out by comparing ADI (Acceptable Daily Intake) with value of EDI (Evaluated Daily Intake) and TMDI (Theoretical Maximum Daily Intake) Risk was estimated by calculating safety margin between ADI and EDI. On the basis of the obtained results it was stated that on the territory of Podlaskie Voivodship 1.79% of urban population and 4.86% of rural population, was taking in nitrates (V) with water supplied by waterworks in doses below the safety margin. Nitrates (V) from drinking water in doses below the safety margin were taken in by population of 10 poviats, with the highest percentage of the population noted in the poviats of: Grajewo (10.97%), Augustów (10.77%) and Sejny (10.43%). Among the urban population the highest percentage noted in the Poviat of Augustów (9.46%), and among the rural population--in the Poviat of Grajewo (22.46%). The highest percentage of the population (69.97%) in Podlaskie Voivodship consumed nitrates (V) with drinking water supplied by waterworks in the range of the safety margin from 1 to 10, including 78.86% of urban population and 53.3% of rural population. It seems useful to continue the environmental research on the exposure of Podlaskie Voivodship inhabitants to nitrates by correlating the risk expressed by the safety margin with cancer epidemiology.
Safety of fenbendazole in common peafowl (Pavo cristatus).

PubMed

Umar, Sajid; Abbas, Seema; Khan, Muhammad Irfan; Nisa, Qamarun; Younus, Muhammad; Aqil, Kiran; Qayyum, Rizwan; Yaqoob, Muhammad; Ali, Asif; Yaseen, Muhammad Asif; Shah, Muhammad Ali

2018-01-01

The present study was undertaken to find out the safety levels of fenbendazole in common peafowl. This bird, raised on aviaries and zoos, can be severely parasitized with Ascaridia galli (enteric worms) and Syngamus trachea (gapeworm) along with other parasitic worms. Fenbendazole is a highly effective benzimidazole-class anthelmintic in animals. The objective of this work was to provide target animal safety data in young peafowl and to demonstrate reproductive safety in adult birds. During the experimental study, diets containing fenbendazole at 0, 100, 200 and 300 ppm were fed for 21 days (three times the normal treatment duration). Data for feed consumption, feed conversion rate, and body weights were recorded for each bird in each group. Drug concentrations in different tissues of birds were determined to correlate concentrations with clinical observations, clinical pathology, and histologic findings. There were no morbidities or mortalities after study day 21. Additionally, there were no statistically significant treatment-related differences among above mentioned parameters. Analysis of fenbendazole concentrations in kidney, liver, leg/thigh, and breast muscle and skin with associated fat revealed that, even at the highest dose level used and with no feed withdrawal, fenbendazole concentrations were relatively low in these tissues. These findings indicate that fenbendazole has a relatively wide margin of safety in young peafowl and that the proposed dose of 100 ppm in the feed for 7 consecutive days is well within the margin of safety. In the reproductive safety study, five breeder peafowl farms fed fendbendazole at 100ppm for 7 days and collected data on hatching percentage of peahen eggs before and after treatment. Reproductive performance in peahen was not adversely affected.

Margins Associated with Loss of Assured Safety for Systems with Multiple Time-Dependent Failure Modes.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Helton, Jon C.; Brooks, Dusty Marie; Sallaberry, Cedric Jean-Marie.

Representations for margins associated with loss of assured safety (LOAS) for weak link (WL)/strong link (SL) systems involving multiple time-dependent failure modes are developed. The following topics are described: (i) defining properties for WLs and SLs, (ii) background on cumulative distribution functions (CDFs) for link failure time, link property value at link failure, and time at which LOAS occurs, (iii) CDFs for failure time margins defined by (time at which SL system fails) – (time at which WL system fails), (iv) CDFs for SL system property values at LOAS, (v) CDFs for WL/SL property value margins defined by (property valuemore » at which SL system fails) – (property value at which WL system fails), and (vi) CDFs for SL property value margins defined by (property value of failing SL at time of SL system failure) – (property value of this SL at time of WL system failure). Included in this presentation is a demonstration of a verification strategy based on defining and approximating the indicated margin results with (i) procedures based on formal integral representations and associated quadrature approximations and (ii) procedures based on algorithms for sampling-based approximations.« less
A Conceptual Aerospace Vehicle Structural System Modeling, Analysis and Design Process

NASA Technical Reports Server (NTRS)

Mukhopadhyay, Vivek

2007-01-01

A process for aerospace structural concept analysis and design is presented, with examples of a blended-wing-body fuselage, a multi-bubble fuselage concept, a notional crew exploration vehicle, and a high altitude long endurance aircraft. Aerospace vehicle structures must withstand all anticipated mission loads, yet must be designed to have optimal structural weight with the required safety margins. For a viable systems study of advanced concepts, these conflicting requirements must be imposed and analyzed early in the conceptual design cycle, preferably with a high degree of fidelity. In this design process, integrated multidisciplinary analysis tools are used in a collaborative engineering environment. First, parametric solid and surface models including the internal structural layout are developed for detailed finite element analyses. Multiple design scenarios are generated for analyzing several structural configurations and material alternatives. The structural stress, deflection, strain, and margins of safety distributions are visualized and the design is improved. Over several design cycles, the refined vehicle parts and assembly models are generated. The accumulated design data is used for the structural mass comparison and concept ranking. The present application focus on the blended-wing-body vehicle structure and advanced composite material are also discussed.
Safety of needle electromyography of the diaphragm: Anterior lung margins in quietly breathing healthy subjects.

PubMed

Podnar, Simon; Doorduin, Jonne

2016-06-01

Controversy persists as to whether the lung interposes on the needle electrode insertion path during diaphragm electromyography (EMG). Using high-resolution ultrasonography, we measured the distances between the medial recess of the intercostal spaces (ICSs) around the mid-clavicular line (MCL) and the lung margin. We performed measurements bilaterally during quiet breathing in the seated and supine positions. We studied 10 young healthy men and found that, in the first ICS with the medial recess clearly (i.e., several cm) lateral to MCL (usually the eighth ICS), the distance between the recommended insertion site and the lung margin varied from 7.5 to 17 cm. The distance was slightly larger on the right side and in the supine position. This study confirms that properly conducted "trans-intercostal" needle EMG of the diaphragm is generally safe in healthy subjects. Muscle Nerve 54: 54-57, 2016. © 2015 Wiley Periodicals, Inc.
Safe insertion of S-2 alar iliac screws: radiological comparison between 2 insertion points using computed tomography and 3D analysis software.

PubMed

Yamada, Kentaro; Abe, Yuichiro; Satoh, Shigenobu

2018-05-01

OBJECTIVE S-2 alar iliac (S2AI) screws are commonly used as anchors for lumbosacral fixation. A serious potential complication of screw insertion is major vascular injury due to anterior or caudal screw deviation. To avoid screw deviation, the pelvic inlet view on intraoperative fluoroscopy images is recommended. However, there has been no detailed investigation of optimal fluoroscopic incline with the pelvic inlet view. The purpose of this study was to investigate the safety margins and to optimize fluoroscopic settings to avoid screw deviation with 2 reported insertion techniques using 3D analysis software and CT. METHODS The study included 50 patients (25 men and 25 women) who underwent abdominal-pelvic CT. With the use of software, the ideal S2AI screws were set from 2 entry points: A) the midpoint between the S-1 dorsal foramen and the S-2 dorsal foramen where they meet the lateral sacral crest, and B) 1 mm inferior and 1 mm lateral to the S-1 dorsal foramen. Anteriorly or caudally deviated screws were defined as deviation of a half thread of the ideal screw by rotation anteriorly or caudally from the entry point. The angular safety margins were compared between the 2 entry points, and patients with small safety margins were investigated. Subsequently, fluoroscopic images were virtualized on ray sum-rendered images. Conditions that provided proper recognition of screw deviation were investigated via lateral and anteroposterior views with the beam tilted caudally. RESULTS The safety margins of S2AI screws were smaller in the anterior direction than in the caudal direction and by entry point A than by entry point B (A: 9.1° ± 1.6° and B: 9.7° ± 1.5° in the anterior direction; A: 10.9° ± 3.8° and B: 13.9° ± 4.1° in the caudal direction). In contrast, patients with a deep-seated L-5 vertebral body tended to have smaller safety margins in the caudal direction. All anteriorly deviated screws were recognized with a 60°-70° inlet view from the S-1 slope. The caudally deviated screws were all recognized on the lateral view, but 31% of screws at entry point A and 21% of screws at entry point B were not recognized on the pelvic inlet view. CONCLUSIONS S2AI screws should be carefully placed to avoid anterior deviation compared with caudal deviation in terms of the safety margin, except in patients with a deep-seated L-5. The difference in safety margins between entry points A and B was negligible. Intraoperative fluoroscopy is recommended with a pelvic inlet view tilted 60°-70° from the S-1 slope to avoid anterior screw deviation. The lateral view is recommended to confirm that the screw is not deviated caudally.
Probabilistic margin evaluation on accidental transients for the ASTRID reactor project

NASA Astrophysics Data System (ADS)

Marquès, Michel

2014-06-01

ASTRID is a technological demonstrator of Sodium cooled Fast Reactor (SFR) under development. The conceptual design studies are being conducted in accordance with the Generation IV reactor objectives, particularly in terms of improving safety. For the hypothetical events, belonging to the accidental category "severe accident prevention situations" having a very low frequency of occurrence, the safety demonstration is no more based on a deterministic demonstration with conservative assumptions on models and parameters but on a "Best-Estimate Plus Uncertainty" (BEPU) approach. This BEPU approach ispresented in this paper for an Unprotected Loss-of-Flow (ULOF) event. The Best-Estimate (BE) analysis of this ULOFt ransient is performed with the CATHARE2 code, which is the French reference system code for SFR applications. The objective of the BEPU analysis is twofold: first evaluate the safety margin to sodium boiling in taking into account the uncertainties on the input parameters of the CATHARE2 code (twenty-two uncertain input parameters have been identified, which can be classified into five groups: reactor power, accident management, pumps characteristics, reactivity coefficients, thermal parameters and head losses); secondly quantify the contribution of each input uncertainty to the overall uncertainty of the safety margins, in order to refocusing R&D efforts on the most influential factors. This paper focuses on the methodological aspects of the evaluation of the safety margin. At least for the preliminary phase of the project (conceptual design), a probabilistic criterion has been fixed in the context of this BEPU analysis; this criterion is the value of the margin to sodium boiling, which has a probability 95% to be exceeded, obtained with a confidence level of 95% (i.e. the M5,95percentile of the margin distribution). This paper presents two methods used to assess this percentile: the Wilks method and the Bootstrap method ; the effectiveness of the two methods is compared on the basis of 500 simulations performed with theCATHARE2 code. We conclude that, with only 100 simulations performed with the CATHARE2 code, which is a number of simulations workable in the conceptual design phase of the ASTRID project where the models and the hypothesis are often modified, it is best in order to evaluate the percentile M5,95 of the margin to sodium boiling to use the bootstrap method, which will provide a slightly conservative result. On the other hand, in order to obtain an accurate estimation of the percentileM5,95, for the safety report for example, it will be necessary to perform at least 300 simulations with the CATHARE2 code. In this case, both methods (Wilks and Bootstrap) would give equivalent results.
Chinese Herbal Therapy for the Treatment of Food Allergy

PubMed Central

Li, Xiu-Min

2014-01-01

Traditional Chinese medicine (TCM) has been widely used in China to treat various diseases for thousands of years. Given its reputed effectiveness, low cost, and favorable safety profile, TCM is attracting great interest in Western societies as a source of therapy for an array of illnesses, including allergies and asthma. Although food allergy has not been described in the TCM literature, a novel treatment for food allergy, named the food allergy herbal formula-2 (FAHF-2), was developed using TCM principles. Using a well-characterized murine model of peanut allergy, FAHF-2 has been shown to be highly effective in providing long-term protection against peanut-induced anaphylaxis, with a high safety margin. Phase 1 human trials have demonstrated the safety of FAHF-2 in food allergic individuals. Currently, a phase 2 trial examining efficacy of FAHF-2 is on-going. Other TCMs also show a potential for treating food allergies in preclinical studies. PMID:22581122
Financial Stability of Level I Trauma Centers Within Safety-Net Hospitals.

PubMed

Knowlton, Lisa M; Morris, Arden M; Tennakoon, Lakshika; Spain, David A; Staudenmayer, Kristan L

2018-04-20

Level I trauma centers often exist within safety-net hospitals (SNHs), facilities servicing high proportions of low-income and uninsured patients. Given the current health care funding environment, trauma centers within SNHs may be at particular risk. Using California as a model, we hypothesized that SNHs with trauma centers vary in terms of financial stability. We performed a retrospective cohort study using data from publicly available financial disclosure reports from California's Office of Statewide Health Planning and Development. Safety-net hospitals were identified from the California Association of Public Hospitals and Health Systems. The primary outcomes metric for financial performance was operating margin. California hospitals with Level I trauma centers were analyzed (11 SNH sites, 2 non SNH). The SNHs did not behave uniformly, and were clustered into county-owned SNHs (36%, n = 4) and nonprofit-owned SNHs (64%, n = 7). Mean operating margins for county SNHs, nonprofit SNHs, and non SNHs were -16.5%, 8.4%, and 9.5%, respectively (p < 0.001). From 2010 to 2015, operating margins improved for all hospitals, partly due to increases in the percent of insured patients and changes in payer mix. Nonprofit SNHs had a payer mix similar to that of non SNHs; county SNHs had the highest proportions of MediCal (California Medicaid) (45% vs 36% vs 12%, respectively, p < 0.001) and uninsured patients (17% vs 5% vs 0%, respectively, p < 0.001) compared with nonprofit SNHs and non SNHs, respectively. The majority (85%) of Level I trauma centers are within SNHs, whose financial stability is highly variable. A group of SNHs rely on infusions of government funds and are therefore susceptible to changes in policy. These findings suggest deliberate funding efforts are critical to protect the health of the US academic trauma system. Copyright © 2018 American College of Surgeons. Published by Elsevier Inc. All rights reserved.
Does the width of the surgical margin of safety or premalignant dermatoses at the negative surgical margin affect outcome in surgically treated penile cancer?

PubMed

Gunia, Sven; Koch, Stefan; Jain, Anjun; May, Matthias

2014-03-01

To evaluate the prognostic impact of the width of negative surgical margins (NSM) and associated and preinvasive lesions at the NSM in patients with penile squamous cell cancer (PSC). Enrolling 87 patients with NSM who underwent surgery for PSC, the archived margin slides and entirely wax-embedded surgical margins were retrieved from the pathology files. After step sections were cut, margins were stained with antibodies against CK5/6, p16, p53 and Ki-67 and subjected to in situ hybridisation for high-risk human papillomavirus (HPV). All NSM were histologically examined for squamous hyperplasia (SH), lichen sclerosus (LS) and subtypes of penile intraepithelial neoplasia (PeIN). Then, histological findings were correlated with cancer-specific mortality (CSM, median follow-up 34 months; IQR 6-70). All NSM were negative for high-risk HPV and exhibited SH (p16 and p53 negative, Ki-67 variably positive), LS (p16 negative, variable p53 and Ki-67 positivity) and differentiated PeIN (dPeIN; p16 negative, Ki-67 positive, variable p53 positivity) in 28 (32%), 30 (34%) and 22 (25%) cases, respectively, whereas PeIN subtypes other then dPeIN did not occur. Pathological tumour stage was the only independent predictive parameter with respect to CSM in the multivariable analysis (p=0.001). SH, LS and dPeIN are frequent histological findings at the NSM of surgically treated PSC. However, neither the width of the NSM nor dPeIN, LS or SH at the NSM influences prognostic outcome.
Cryptosporidium and Giardia safety margin increase in leafy green vegetables irrigated with treated wastewater.

PubMed

Domenech, Eva; Amorós, Inmaculada; Moreno, Yolanda; Alonso, José L

2018-01-01

The presence of Cryptosporidium and Giardia in waste water is a main concern because water reuse for irrigation can jeopardize human health. Spanish Legislation for water reuse does not oblige to analyze the presence of both pathogens Cryptosporidium and Giardia in reused water for irrigation. Therefore, the objective of this paper is to determine the influence of wastewater treatment in the increase of the consumer safety margin in relation to the presence of Cryptosporidium and Giardia in leafy green vegetables. With this aim in mind, a total of 108 samples from raw (influent) and treated wastewater (effluent) from three wastewater treatment plants in Spain were analysed according to USEPA Method 1623. Effluent results show that Cryptosporidium oocysts average counts ranged from 1.38 to 2.6/L oocysts and Giardia cysts ranged from 0.6 to 1.7/L cysts, which means a removal values of 2.7 log, 2.5 log and 1.8 log for Cryptosporidium oocysts and 1 log, 2 log and 2.2 log for Giardia cysts in the three wastewater treatment plants analysed. In relation to safety margin the highest probability that exposure exceed the dose response was observed for Giardia. In addition, the sensitivity analysis showed that (oo)cysts concentration present in the leafy green vegetables and the human dose-response were the most influential inputs in the safety margin obtained. Copyright © 2017 The Authors. Published by Elsevier GmbH.. All rights reserved.
A quantitative comparison of the safety margins in the european indicative occupational exposure limits and the derived no-effect levels for workers under REACH.

PubMed

Schenk, Linda; Johanson, Gunnar

2011-06-01

The new European Union (EU) REACH legislation requires derived no-effect levels (DNELs) to be calculated for substances produced in quantities above 10 tonnes/year. Meanwhile, the setting of occupational exposure limits (OELs) continues both at the member state and the EU levels. According to REACH, indicative OEL values (IOELVs) from the Commission may under some circumstances be used as worker-DNELs. On the other hand, worker-DNELs will be derived for several thousand substances, far more than the approximately 100 substances for which IOELVs have been established. Thus, the procedure to set health-based OELs may become influential on that of DNELs and vice versa. In this study, we compare the safety margins of 88 Scientific Committee on OELs (SCOEL) recommendations with those of the corresponding worker-DNELs, derived according to the default approach as described in the REACH guidance document. Overall, the REACH safety margins were approximately six times higher than those derived from the SCOEL documentation but varied widely with REACH/SCOEL safety margin ratios ranging by two orders of magnitude, from 0.3 to 58 (n = 88). The discrepancies may create confusion in terms of legal compliance, risk management, and risk communication. We also found that the REACH guidance document, although encompassing detailed advice on many issues, including default assessment factors for species and route extrapolation, gives little quantitative guidance on when and how to depart from defaults.
Correlation between safety climate and contractor safety assessment programs in construction.

PubMed

Sparer, Emily H; Murphy, Lauren A; Taylor, Kathryn M; Dennerlein, Jack T

2013-12-01

Contractor safety assessment programs (CSAPs) measure safety performance by integrating multiple data sources together; however, the relationship between these measures of safety performance and safety climate within the construction industry is unknown. Four hundred and one construction workers employed by 68 companies on 26 sites and 11 safety managers employed by 11 companies completed brief surveys containing a nine-item safety climate scale developed for the construction industry. CSAP scores from ConstructSecure, Inc., an online CSAP database, classified these 68 companies as high or low scorers, with the median score of the sample population as the threshold. Spearman rank correlations evaluated the association between the CSAP score and the safety climate score at the individual level, as well as with various grouping methodologies. In addition, Spearman correlations evaluated the comparison between manager-assessed safety climate and worker-assessed safety climate. There were no statistically significant differences between safety climate scores reported by workers in the high and low CSAP groups. There were, at best, weak correlations between workers' safety climate scores and the company CSAP scores, with marginal statistical significance with two groupings of the data. There were also no significant differences between the manager-assessed safety climate and the worker-assessed safety climate scores. A CSAP safety performance score does not appear to capture safety climate, as measured in this study. The nature of safety climate in construction is complex, which may be reflective of the challenges in measuring safety climate within this industry. Am. J. Ind. Med. 56:1463-1472, 2013. © 2013 Wiley Periodicals, Inc. © 2013 Wiley Periodicals, Inc.
The application of measurement techniques to track flutter testing

NASA Technical Reports Server (NTRS)

Roglin, H. R.

1975-01-01

The application is discussed of measurement techniques to captive flight flutter tests at the Supersonic Naval Ordnance Research Track (SNORT), U. S. Naval Ordnance Test Station, China Lake, California. The high-speed track, by its ability to prove the validity of design and to accurately determine the actual margin of safety, offers a unique method of flutter testing for the aircraft design engineer.
A General Safety Assessment for Purified Food Ingredients Derived From Biotechnology Crops: Case Study of Brazilian Sugar and Beverages Produced From Insect-Protected Sugarcane.

PubMed

Kennedy, Reese D; Cheavegatti-Gianotto, Adriana; de Oliveira, Wladecir S; Lirette, Ronald P; Hjelle, Jerry J

2018-01-01

Insect-protected sugarcane that expresses Cry1Ab has been developed in Brazil. Analysis of trade information has shown that effectively all the sugarcane-derived Brazilian exports are raw or refined sugar and ethanol. The fact that raw and refined sugar are highly purified food ingredients, with no detectable transgenic protein, provides an interesting case study of a generalized safety assessment approach. In this study, both the theoretical protein intakes and safety assessments of Cry1Ab, Cry1Ac, NPTII, and Bar proteins used in insect-protected biotechnology crops were examined. The potential consumption of these proteins was examined using local market research data of average added sugar intakes in eight diverse and representative Brazilian raw and refined sugar export markets (Brazil, Canada, China, Indonesia, India, Japan, Russia, and the USA). The average sugar intakes, which ranged from 5.1 g of added sugar/person/day (India) to 126 g sugar/p/day (USA) were used to calculated possible human exposure. The theoretical protein intake estimates were carried out in the "Worst-case" scenario, assumed that 1 μg of newly-expressed protein is detected/g of raw or refined sugar; and the "Reasonable-case" scenario assumed 1 ng protein/g sugar. The "Worst-case" scenario was based on results of detailed studies of sugarcane processing in Brazil that showed that refined sugar contains less than 1 μg of total plant protein /g refined sugar. The "Reasonable-case" scenario was based on assumption that the expression levels in stalk of newly-expressed proteins were less than 0.1% of total stalk protein. Using these calculated protein intake values from the consumption of sugar, along with the accepted NOAEL levels of the four representative proteins we concluded that safety margins for the "Worst-case" scenario ranged from 6.9 × 10 5 to 5.9 × 10 7 and for the "Reasonable-case" scenario ranged from 6.9 × 10 8 to 5.9 × 10 10 . These safety margins are very high due to the extremely low possible exposures and the high NOAELs for these non-toxic proteins. This generalized approach to the safety assessment of highly purified food ingredients like sugar illustrates that sugar processed from Brazilian GM varieties are safe for consumption in representative markets globally.
Loss of Coolant Accident (LOCA) / Emergency Core Coolant System (ECCS Evaluation of Risk-Informed Margins Management Strategies for a Representative Pressurized Water Reactor (PWR)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szilard, Ronaldo Henriques

A Risk Informed Safety Margin Characterization (RISMC) toolkit and methodology are proposed for investigating nuclear power plant core, fuels design and safety analysis, including postulated Loss-of-Coolant Accident (LOCA) analysis. This toolkit, under an integrated evaluation model framework, is name LOCA toolkit for the US (LOTUS). This demonstration includes coupled analysis of core design, fuel design, thermal hydraulics and systems analysis, using advanced risk analysis tools and methods to investigate a wide range of results.
Tyre-road grip coefficient assessment - Part II: online estimation using instrumented vehicle, extended Kalman filter, and neural network

NASA Astrophysics Data System (ADS)

Luque, Pablo; Mántaras, Daniel A.; Fidalgo, Eloy; Álvarez, Javier; Riva, Paolo; Girón, Pablo; Compadre, Diego; Ferran, Jordi

2013-12-01

The main objective of this work is to determine the limit of safe driving conditions by identifying the maximal friction coefficient in a real vehicle. The study will focus on finding a method to determine this limit before reaching the skid, which is valuable information in the context of traffic safety. Since it is not possible to measure the friction coefficient directly, it will be estimated using the appropriate tools in order to get the most accurate information. A real vehicle is instrumented to collect information of general kinematics and steering tie-rod forces. A real-time algorithm is developed to estimate forces and aligning torque in the tyres using an extended Kalman filter and neural networks techniques. The methodology is based on determining the aligning torque; this variable allows evaluation of the behaviour of the tyre. It transmits interesting information from the tyre-road contact and can be used to predict the maximal tyre grip and safety margin. The maximal grip coefficient is estimated according to a knowledge base, extracted from computer simulation of a high detailed three-dimensional model, using Adams® software. The proposed methodology is validated and applied to real driving conditions, in which maximal grip and safety margin are properly estimated.
The relationship between safety net activities and hospital financial performance

PubMed Central

2010-01-01

Background During the 1990's hospitals in the U.S were faced with cost containment charges, which may have disproportionately impacted hospitals that serve poor patients. The purposes of this paper are to study the impact of safety net activities on total profit margins and operating expenditures, and to trace these relationships over the 1990s for all U.S urban hospitals, controlling for hospital and market characteristics. Methods The primary data source used for this analysis is the Annual Survey of Hospitals from the American Hospital Association and Medicare Hospital Cost Reports for years 1990-1999. Ordinary least square, hospital fixed effects, and two-stage least square analyses were performed for years 1990-1999. Logged total profit margin and operating expenditure were the dependent variables. The safety net activities are the socioeconomic status of the population in the hospital serving area, and Medicaid intensity. In some specifications, we also included uncompensated care burden. Results We found little evidence of negative effects of safety net activities on total margin. However, hospitals serving a low socioeconomic population had lower expenditure raising concerns for the quality of the services provided. Conclusions Despite potentially negative policy and market changes during the 1990s, safety net activities do not appear to have imperiled the survival of hospitals. There may, however, be concerns about the long-term quality of the services for hospitals serving low socioeconomic population. PMID:20074367
Leader-member exchange: Moderating the health and safety outcomes of job insecurity.

PubMed

Probst, Tahira M; Jiang, Lixin; Graso, Maja

2016-02-01

Job insecurity has been repeatedly linked with poor employee health and safety outcomes. Although research on high quality leader-member exchange (LMX) has demonstrated many beneficial effects, no research to date has examined the extent to which positive LMX might attenuate those adverse health and safety-related consequences of job insecurity. The current study extends research in this area by specifically examining the buffering impact of LMX on the relationship between job insecurity and safety knowledge, reported accidents, and physical health conditions. Furthermore, the study also examines whether positive LMX mitigates the typically seen negative impact of job insecurity on supervisor satisfaction. The hypotheses were tested using survey data collected from 212 employees of a mine located in southwestern United States. As predicted, job insecurity was related to lower levels of supervisor satisfaction, more health ailments, and more workplace accidents, and was marginally related to lower levels of safety knowledge. Results indicated that LMX significantly attenuated these observed relationships. The quality of the dyadic relationship between supervisor and subordinate has a significant impact on the extent to which job insecurity is associated with adverse health and safety outcomes. Practical implications for supervisor behavior and developing high quality LMX are discussed in light of today's pervasive job insecurity. Copyright © 2015 Elsevier Ltd and National Safety Council. All rights reserved.
Updated evidence-based clinical practice guidelines for the diagnosis and management of melanoma: definitive excision margins for primary cutaneous melanoma.

PubMed

Sladden, Michael J; Nieweg, Omgo E; Howle, Julie; Coventry, Brendon J; Thompson, John F

2018-02-19

Definitive management of primary cutaneous melanoma consists of surgical excision of the melanoma with the aim of curing the patient. The melanoma is widely excised together with a safety margin of surrounding skin and subcutaneous tissue, after the diagnosis and Breslow thickness have been established by histological assessment of the initial excision biopsy specimen. Sentinel lymph node biopsy should be discussed for melanomas ≥ 1 mm thickness (≥ 0.8 mm if other high risk features) in which case lymphoscintigraphy must be performed before wider excision of the primary melanoma site. The 2008 evidence-based clinical practice guidelines for the management of melanoma (http://www.cancer.org.au/content/pdf/HealthProfessionals/ClinicalGuidelines/ClinicalPracticeGuidelines-ManagementofMelanoma.pdf) are currently being revised and updated in a staged process by a multidisciplinary working party established by Cancer Council Australia. The guidelines for definitive excision margins for primary melanomas have been revised as part of this process. Main recommendations: The recommendations for definitive wide local excision of primary cutaneous melanoma are: melanoma in situ: 5-10 mm margins invasive melanoma (pT1) ≤ 1.0 mm thick: 1 cm margins invasive melanoma (pT2) 1.01-2.00 mm thick: 1-2 cm margins invasive melanoma (pT3) 2.01-4.00 mm thick: 1-2 cm margins invasive melanoma (pT4) > 4.0 mm thick: 2 cm margins Changes in management as a result of the guideline: Based on currently available evidence, excision margins for invasive melanoma have been left unchanged compared with the 2008 guidelines. However, melanoma in situ should be excised with 5-10 mm margins, with the aim of achieving complete histological clearance. Minimum clearances from all margins should be assessed and stated. Consideration should be given to further excision if necessary; positive or close histological margins are unacceptable.
Defibrillation threshold testing fails to show clinical benefit during long-term follow-up of patients undergoing cardiac resynchronization therapy defibrillator implantation.

PubMed

Michowitz, Yoav; Lellouche, Nicolas; Contractor, Tahmeed; Bourke, Tara; Wiener, Isaac; Buch, Eric; Boyle, Noel; Bersohn, Malcolm; Shivkumar, Kalyanam

2011-05-01

The utility of defibrillation threshold testing in patients undergoing implantable cardioverter-defibrillator (ICD) implantation is controversial. Higher defibrillation thresholds have been noted in patients undergoing implantation of cardiac resynchronization therapy defibrillators (CRT-D). Since the risks and potential benefits of testing may be higher in this population, we sought to assess the impact of defibrillation safety margin or vulnerability safety margin testing in CRT-D recipients. A total of 256 consecutive subjects who underwent CRT-D implantation between January 2003 and December 2007 were retrospectively reviewed. Subjects were divided into two groups based on whether (n= 204) or not (n= 52) safety margin testing was performed. Patient characteristics, tachyarrhythmia therapies, procedural results, and clinical outcomes were recorded. Baseline characteristics, including heart failure (HF) severity, were comparable between the groups. Four cases of HF exacerbation (2%), including one leading to one death, were recorded in the tested group immediately post-implantation. No complications were observed in the untested group. After a mean follow-up of 32 ± 20 months, the proportion of appropriate shocks in the two groups was similar (31 vs. 25%, P = 0.49). There were three cases of failed appropriate shocks in the tested group, despite adequate safety margins at implantation, whereas no failed shocks were noted in the untested group. Survival was similar in the two groups. Defibrillation efficacy testing during implant of CRT-D was associated with increased morbidity and did not predict the success of future device therapy or improve survival during long-term follow-up.
Manipulation of a fragile object by elderly individuals.

PubMed

Gorniak, Stacey L; Zatsiorsky, Vladimir M; Latash, Mark L

2011-08-01

We investigated strategies of healthy elderly participants (74-84 years old) during prehension and transport of an object with varying degrees of fragility. Fragility was specified as the maximal normal force that the object could withstand without collapsing. Specifically, kinetic and kinematic variables as well as and force covariation indices were quantified and compared to those shown by young healthy persons (19-28 years old). We tested three hypotheses related to age-related changes in two safety margins (slip safety margin and crush safety margin) and indices of force covariation. Compared to young controls, elderly individuals exhibited a decrease in object acceleration and an increase in movement time, an increase in grip force production, a decrease in the correlation between grip and load forces, an overall decrease in indices of multi-digit synergies, and lower safety margin indices computed with respect to both dropping and crushing the object. Elderly participants preferred to be at a relatively lower risk of crushing the object even if this led to a higher risk of dropping it. Both groups showed an increase in the index of synergy stabilizing total normal force produced by the four fingers with increased fragility of the object. Age-related changes are viewed as a direct result of physiological changes due to aging, not adaptation to object fragility. Such changes in overall characteristics of prehension likely reflect diminished synergic control by the central nervous system of finger forces with aging. The findings corroborate an earlier hypothesis on an age-related shift from synergic to element-based control.

Ensuring the validity of calculated subcritical limits

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, H.K.

1977-01-01

The care taken at the Savannah River Laboratory and Plant to ensure the validity of calculated subcritical limits is described. Close attention is given to ANSI N16.1-1975, ''Validation of Calculational Methods for Nuclear Criticality Safety.'' The computer codes used for criticality safety computations, which are listed and are briefly described, have been placed in the SRL JOSHUA system to facilitate calculation and to reduce input errors. A driver module, KOKO, simplifies and standardizes input and links the codes together in various ways. For any criticality safety evaluation, correlations of the calculational methods are made with experiment to establish bias. Occasionallymore » subcritical experiments are performed expressly to provide benchmarks. Calculated subcritical limits contain an adequate but not excessive margin to allow for uncertainty in the bias. The final step in any criticality safety evaluation is the writing of a report describing the calculations and justifying the margin.« less
2015 Accomplishments Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This report covers selected highlights from the four research pathways in the LWRS Program: Materials Aging and Degradation; Risk-Informed Safety Margin Characterization; Advanced Instrumentation, Information, and Control Systems Technologies; and Reactor Safety Technologies, as well as a look-ahead at planned activities for 2017.
2016 Accomplishments Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

This report covers selected highlights from the four research pathways in the LWRS Program: Materials Aging and Degradation; Risk-Informed Safety Margin Characterization; Advanced Instrumentation, Information, and Control Systems Technologies; and Reactor Safety Technologies, as well as a look-ahead at planned activities for 2017.
77 FR 69507 - Proposed Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-19

..., ``Revise Shutdown Margin Definition To Address Advanced Fuel Designs'' AGENCY: Nuclear Regulatory... Shutdown Margin Definition to Address Advanced Fuel Designs.'' DATES: Comment period expires on December 19... address newer BWR fuel designs, which may be more reactive at shutdown temperatures above 68[emsp14][deg]F...
Lung segment geometry study: simulation of largest possible tumours that fit into bronchopulmonary segments.

PubMed

Welter, S; Stöcker, C; Dicken, V; Kühl, H; Krass, S; Stamatis, G

2012-03-01

Segmental resection in stage I non-small cell lung cancer (NSCLC) has been well described and is considered to have similar survival rates as lobectomy but with increased rates of local tumour recurrence due to inadequate parenchymal margins. In consequence, today segmentectomy is only performed when the tumour is smaller than 2 cm. Three-dimensional reconstructions from 11 thin-slice CT scans of bronchopulmonary segments were generated, and virtual spherical tumours were placed over the segments, respecting all segmental borders. As a next step, virtual parenchymal safety margins of 2 cm and 3 cm were subtracted and the size of the remaining tumour calculated. The maximum tumour diameters with a 30-mm parenchymal safety margin ranged from 26.1 mm in right-sided segments 7 + 8 to 59.8 mm in the left apical segments 1-3. Using a three-dimensional reconstruction of lung CT scans, we demonstrated that segmentectomy or resection of segmental groups should be feasible with adequate margins, even for larger tumours in selected cases. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.
Ultrasound-ultrasound image overlay fusion improves real-time control of radiofrequency ablation margin in the treatment of hepatocellular carcinoma.

PubMed

Minami, Yasunori; Minami, Tomohiro; Hagiwara, Satoru; Ida, Hiroshi; Ueshima, Kazuomi; Nishida, Naoshi; Murakami, Takamichi; Kudo, Masatoshi

2018-05-01

To assess the clinical feasibility of US-US image overlay fusion with evaluation of the ablative margin in radiofrequency ablation (RFA) for hepatocellular carcinoma (HCC). Fifty-three patients with 68 HCCs measuring 0.9-4.0 cm who underwent RFA guided by US-US overlay image fusion were included in this retrospective study. By an overlay of pre-/postoperative US, the tumor image could be projected onto the ablative hyperechoic zone. Therefore, the ablative margin three-dimensionally could be shown during the RFA procedure. US-US image overlay was compared to dynamic CT a few days after RFA for assessment of early treatment response. Accuracy of graded response was calculated, and the performance of US-US image overlay fusion was compared with that of CT using a Kappa agreement test. Technically effective ablation was achieved in a single session, and 59 HCCs (86.8 %) succeeded in obtaining a 5-mm margin on CT. The response with US-US image overlay correctly predicted early CT evaluation with an accuracy of 92.6 % (63/68) (k = 0.67; 95 % CI: 0.39-0.95). US-US image overlay fusion can be proposed as a feasible guidance in RFA with a safety margin and predicts early response of treatment assessment with high accuracy. • US-US image overlay fusion visualizes the ablative margin during RFA procedure. • Visualizing the margin during the procedure can prompt immediate complementary treatment. • US image fusion correlates with the results of early evaluation CT.
Intravenous infusion of prostaglandin E2 for management of premature rupture of membranes.

PubMed

Thiery, M; Parewijck, W; Martens, G

1982-01-01

In term with premature rupture of the membranes (PROM) and an unripe cervix who have no contraindications for prostaglandin (PG) administration and vaginal delivery, intravenous (I.V.) infusion of titrated PGE2 is highly effective. In healthy gravidas with dito fetus this treatment appeared perinatally safe and was well tolerated by the mother. To enhance its safety margin and procedure must be conducted under toco-cardiographic control.
Integral throat entrance development, qualification and production for the Antares 3 nozzle

NASA Technical Reports Server (NTRS)

Clayton, F. I.; Dirling, R. B.; Eitman, D. A.; Loomis, W. C.

1982-01-01

Although design analyses of a G-90 graphite integral throat entrance for the Antares 3 solid rocket motor nozzle indicated acceptable margins of safety, the nozzle throat insert suffered a thermostructural failure during the first development firing. Subsequent re-analysis using properties measured on material from the same billet as the nozzle throat insert showed negative margins. Carbon-carbon was investigated and found to result in large positive margins of safety. The G-90 graphite was replaced by SAI fast processed 4-D material which uses Hercules HM 10000 fiber as the reinforcement. Its construction allows powder filling of the interstices after preform fabrication which accelerates the densification process. Allied 15V coal tar pitch is then used to complete densification. The properties were extensively characterized on this material and six nozzles were subjected to demonstration, development and qualification firings.
Long-term safety concerns with proton pump inhibitors.

PubMed

Ali, Tauseef; Roberts, David Neil; Tierney, William M

2009-10-01

Proton pump inhibitors (PPIs) are among the most widely prescribed medications worldwide. Their use has resulted in dramatic improvements in treatment of peptic ulcer disease and gastroesophageal reflux disease. Despite an acceptable safety profile, mounting data demonstrate concerns about the long-term use of PPIs. To provide a comprehensive review regarding the concerns of long-term PPI use, a literature search was performed to identify pertinent original and review articles. Despite study shortcomings, the collective body of information overwhelmingly suggests an increased risk of infectious complications and nutritional deficiencies. Data regarding any increased risk in gastric or colon malignancy are less convincing. PPIs have revolutionized the management and complications of acid-related disorders with a high margin of safety; however, with the data available, efforts to reduce the dosing of or discontinue the use of PPIs must be reassessed frequently.
Safety margins in zircaloy oxidation and embrittlement criteria for emergency core cooling system acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williford, R.E.

1986-09-01

Current emergency core cooling system acceptance criteria for light water reactors specify that, under loss-of-coolant accident (LOCA) conditions, the Baker-Just (BJ) correlation must be used to calculate Zircaloy-steam oxidation, calculated peak cladding temperatures (PCT) must not exceed 1204/sup 0/C, and calculated oxidation must not exceed 17% equivalent cladding reacted (ECR). An appropriately defined minimum margin of safety was estimated for each of these criteria. The currently required BJ oxidation correlation provides margins only over the 1100 to 1500/sup 0/C temperature range at the 95% confidence level. The PCT margins for thermal shock and handling failures are adequate at oxidation temperaturesmore » above 1204/sup 0/C for up to 210 and 160 s, respectively, at the 95% confidence level. The ECR thermal shock and handling margins at the 50 and 95% confidence levels, respectively, range between 2 and 7% ECR for the BJ correlation, but vanish at temperatures above 1100 to 1160/sup 0/C for the best-estimate Cathcart-Pawel correlation. However, use of the Cathcart Pawel correlation for ''design basis'' LOCA calculations can be justified at the 85 to 88% confidence level if cooling rate effects can be neglected.« less
Influence of Passive Stiffness of Hamstrings on Postural Stability

PubMed Central

Kuszewski, Michał; Gnat, Rafał; Sobota, Grzegorz; Myśliwiec, Andrzej

2015-01-01

The aim of the study was to explore whether passive stiffness of the hamstrings influences the strategy of maintaining postural stability. A sample of 50 subjects was selected; the final analyses were based on data of 41 individuals (33 men, 8 women) aged 21 to 29 (mean = 23.3, SD = 1.1) years. A quasi- experimental ex post facto design with repeated measures was used. Categories of independent variables were obtained directly prior to the measurement of the dependent variables. In stage one of the study, passive knee extension was measured in the supine position to assess hamstring stiffness. In stage two, the magnitude of postural sway in antero-posterior direction was measured, while varying the body position on a stabilometric platform, both with and without visual control. The margin of safety was used as a measure of postural control. The magnitude of the margin of safety increased significantly between the open-eye and closed-eye trials. However, although we registered a visible tendency for a larger increase of the margin of safety associated with lower levels of passive hamstrings stiffness, no significant differences were found. Therefore, this study demonstrated that hamstring stiffness did not influence the strategy used to maintain postural stability. PMID:25964809
Influence of passive stiffness of hamstrings on postural stability.

PubMed

Kuszewski, Michał; Gnat, Rafał; Sobota, Grzegorz; Myśliwiec, Andrzej

2015-03-29

The aim of the study was to explore whether passive stiffness of the hamstrings influences the strategy of maintaining postural stability. A sample of 50 subjects was selected; the final analyses were based on data of 41 individuals (33 men, 8 women) aged 21 to 29 (mean = 23.3, SD = 1.1) years. A quasi- experimental ex post facto design with repeated measures was used. Categories of independent variables were obtained directly prior to the measurement of the dependent variables. In stage one of the study, passive knee extension was measured in the supine position to assess hamstring stiffness. In stage two, the magnitude of postural sway in antero-posterior direction was measured, while varying the body position on a stabilometric platform, both with and without visual control. The margin of safety was used as a measure of postural control. The magnitude of the margin of safety increased significantly between the open-eye and closed-eye trials. However, although we registered a visible tendency for a larger increase of the margin of safety associated with lower levels of passive hamstrings stiffness, no significant differences were found. Therefore, this study demonstrated that hamstring stiffness did not influence the strategy used to maintain postural stability.
An empirical assessment of driver motivation and emotional states in perceived safety margins under varied driving conditions.

PubMed

Zhang, Yu; Kaber, David B

2013-01-01

Motivation models in driving behaviour postulate that driver motives and emotional states dictate risk tolerance under various traffic conditions. The present study used time and driver performance-based payment systems to manipulate motivation and risk-taking behaviour. Ten participants drove to a predefined location in a simulated driving environment. Traffic patterns (density and velocity) were manipulated to cause driver behaviour adjustments due to the need to conform with the social norms of the roadway. The driving environment complexity was investigated as a mediating factor in risk tolerance. Results revealed the performance-based payment system to closely relate to risk-taking behaviour as compared with the time-based payment system. Drivers conformed with social norms associated with specific traffic patterns. Higher roadway complexity led to a more conservative safety margins and speeds. This research contributes to the further development of motivational models of driver behaviour. This study provides empirical justification for two motivation factors in driver risk-taking decisions, including compliance with social norm and emotions triggered by incentives. Environment complexity was identified as a mediating factor in motivational behaviour model. This study also recommended safety margin measures sensitive to changes in driver risk tolerance.
Talonavicular joint arthroscopic portals: A cadaveric study of feasibility and safety.

PubMed

Xavier, Gabriel; Oliva, Xavier Martin; Rotinen, Mauri; Monzo, Mariano

2016-09-01

The objectives of the study were to evaluate the safety of hypothetical arthroscopic portals from talonavicular joint and to evaluate their reproducibility and enforceability. 19 cadaveric feet were marked and four arthroscopic portals were made (medial, dorsomedial, dorsolateral and lateral). The specimens were dissected in layers and the distances between neurovascular structures and the trocars were measured. Medial and dorsomedial portals were in average 8.3 and 8.7, respectively, to the saphenous vein and nerve. Dorsolateral portal was in average 8.1mm to the deep peroneal nerve and dorsalis pedis artery, and 9.1mm to the medial dorsal cutaneous branch of the superficial peroneal nerve. Lateral portal was in average 12.3mm to the intermediate dorsal cutaneous branch of the superficial peroneal nerve. Tested portals shown to have a good safety margin for the foot neurovascular deep dorsal structures and an acceptable safety margin for the superficial neurovascular structures. Copyright © 2015 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.
Assessment of safety margins in zircaloy oxidation and embrittlement criteria for ECCS acceptance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Williford, R.E.

1986-04-01

Current Emergency Core Cooling System (ECCS) Acceptance Criteria for light-water reactors include certain requirements pertaining to calculations of core performance during a Loss of Coolant Accident (LOCA). The Baker-Just correlation must be used to calculate Zircaloy-steam oxidation, calculated peak cladding temperatures (PCT) must not exceed 1204/sup 0/C, and calculated oxidation must not exceed 17% equivalent cladding reacted (17% ECR). The minimum margin of safety was estimated for each of these criteria, based on research performed in the last decade. Margins were defined as the amounts of conservatism over and above the expected extreme values computed from the data base atmore » specified confidence levels. The currently required Baker-Just oxidation correlation provides margins only over the 1100/sup 0/C to 1500/sup 0/C temperature range at the 95% confidence level. The PCT margins for thermal shock and handling failures are adequate at oxidation temperatures above 1204/sup 0/C for 210 and 160 seconds, respectively, at the 95% confidence level. ECR thermal shock and handling margins at the 50% and 95% confidence levels, respectively, range between 2% and 7% ECR for the Baker-Just correlation, but vanish at temperatures between 1100/sup 0/C and 1160/sup 0/C for the best-estimate Cathcart-Pawel correlation. Use of the Cathcart-Pawel correlation for LOCA calculations can be justified at the 85% to 88% confidence level if cooling rate effects can be neglected. 75 refs., 21 figs.« less
Nonclinical safety of mavrilimumab, an anti-GMCSF receptor alpha monoclonal antibody, in cynomolgus monkeys: Relevance for human safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryan, Patricia C., E-mail: ryanp@medimmune.com; Sleeman, Matthew A.; Rebelatto, Marlon

Mavrilimumab (CAM-3001) is an investigational human IgG4 monoclonal antibody (MAb) targeting GM-CSF receptor alpha which is currently being developed for the treatment of RA. GM-CSF plays a central role in the pathogenesis of rheumatoid arthritis (RA) through the activation, differentiation, and survival of macrophages and neutrophils. To support clinical development, the nonclinical safety of mavrilimumab was evaluated in several studies with cynomolgus monkeys as the pharmacologically relevant species. Comprehensive toxicity parameters were assessed in each study, and treatment duration ranged from 4 to 26 weeks. Mavrilimumab has an acceptable safety profile in monkeys with no changes in any parameters othermore » than microscopic findings in lung. In several studies, minimal accumulation of foamy alveolar macrophages was observed. This finding was only seen in studies of at least 11 weeks duration, was reversible following a dose-free recovery period and was considered non-adverse. At higher dose levels (≥ 30 mg/kg/week), in a 26-week repeat-IV dose study, the presence of lung foreign material, cholesterol clefts, and granulomatous inflammation was also observed in a few animals and was considered adverse. The dose- and time-related accumulation of foamy macrophages in lung following exposure to mavrilimumab observed in several NHP studies was expected based upon the known role of GM-CSFRα signaling in the function of alveolar macrophages. Overall, a clean no-observed-adverse-effect-level (NOAEL) without any effects in lung was established and provided adequate clinical safety margins. In clinical studies in RA patients, mavrilimumab has demonstrated good clinical activity with adequate safety to support further clinical development. A Phase 2b study of mavrilimumab in subjects with RA is in progress. - Highlights: • Mavrilimumab is a MAB targeting GM-CSFRα being developed for RA therapy. • Mavrilimumab has an acceptable safety profile in cynomolgus monkeys. • Lung changes observed reflect role of GM-CSF in alveolar macrophage function. • High safety margins support continued clinical development of mavrilimumab.« less
Exposure to solar radiation drives organismal vulnerability to climate: Evidence from an intertidal limpet.

PubMed

Chapperon, Coraline; Volkenborn, Nils; Clavier, Jacques; Séité, Sarah; Seabra, Rui; Lima, Fernando P

2016-04-01

Understanding the physiological abilities of organisms to cope with heat stress is critical for predictions of species' distributions in response to climate change. We investigated physiological responses (respiration and heart beat rate) of the ectotherm limpet Patella vulgata to heat stress events during emersion and the role of seasonal and microclimatic acclimatization for individual thermal tolerance limits. Individuals were collected from 5 microhabitats characterized by different exposure to solar radiation in the high intertidal zone of a semi-exposed rocky shore in winter and summer of 2014. Upper thermal tolerance limits (heat coma temperatures - HCTs, and heart rate Arrhenius break temperatures - ABTs) were determined for individuals from each microhabitat in both seasons under laboratory conditions. While we found a clear seasonal acclimatization, i.e., higher HCTs and ABTs in summer than in winter, we did not find evidence for microhabitat-specific responses that would suggest microclimatic acclimatization. However, operative limpet temperatures derived from in-situ temperature measurements suggest that individuals from sun exposed microhabitats have a much narrower thermal safety margins than those from less exposed surfaces or within crevices. Microhabitat specific thermal safety margins caused by high thermal heterogeneity at small spatial scales and the lack of short term acclimatization will likely shape small scale distribution patterns of intertidal species in response to the predicted increase in the frequency and intensity of heat waves. Copyright © 2016 Elsevier Ltd. All rights reserved.
Panel discussion on vaccine development to meet U.S. and international needs. Strategies for reducing the disincentives to HIV vaccine development: description of a successful public-private sector international collaboration.

PubMed

Bronnenkant, L

1994-01-01

A representative of Finishing Enterprises, the world's largest manufacturer of intrauterine contraceptive devices (IUDs), discusses how to alter the balance of incentives-disincentives to expedite the development of HIV vaccines for international evaluation. Three main disincentives exist for private manufacturers in the United States to develop a new HIV vaccine to be used in developing countries, outside the profitable North American and western European markets: 1) low profit margin because of limited money, time, and resources. Medium and large-sized corporations are more concerned with a high return on their investment owing to stockholder pressure than with the human benefit of that investment. 2) Lengthy regulatory approval process. The current regulatory process in the US is tedious, time-consuming, and costly. 3) Liability risk. The United States is the most litigious society in the world. Suits filed against US corporations involved in drug manufacture incur legal defence costs, which make an already low profit margin HIV vaccine even lower. Finishing Enterprises' IUD program aimed at providing the safest and most effective IUD at an affordable price in a socially responsible way. The Population Council developed the Copper T and retained the patent rights. They and other international health authorities, such as the World Health Organization, conducted or monitored international clinical trials to determine safety and efficacy. Private foundations and public donor agencies funded these activities. When donor agencies committed to volume purchases for their commodity programs, Finishing Enterprises could commit to volume pricing. Whenever high-margin private sector sales occur, Population Council receives a royalty payment. Thus, the disincentives were overcome: 1) Low profit margin was less an issue for a small, private company created specifically to manufacture IUDs and guaranteed volume orders. 2) Lengthy regulatory approval processes were avoided by various international clinical trials, generating international interest in the product. 3) Liability risk was minimized by the variety of safety tests the product underwent.
Isocyanate and total inhalable particulate air measurements in the European wood panel industry.

PubMed

Vangronsveld, E; Berckmans, S; Verbinnen, K; Van Leeuw, C; Bormans, C

2010-11-01

It is well known that the use of MDI (methylene diphenyldiisocyanate) as an alternative for formaldehyde-based resins is seen as a responsible option to reduce formaldehyde emissions for CWP (Composite Wood Products) in buildings. However, there are concerns raised regarding the exposure risk of workers. The purpose of this article is to provide the reader with factual information to demonstrate that the use of MDI compared to other agents used in CWP production processes does not pose increased inhalation exposure risks for workers. Personal and area air measurements were carried out at nine Composite Wood Panel plants throughout Europe to assess potential inhalation exposures to MDI and wood dust as Total Inhalable Particulates (TIP). In total, 446 pairs of samples were collected for MDI and TIP of which 283 pairs were personal samples and the remaining 163 pairs were area samples collected at key locations along the production line. This data together with published formaldehyde exposure data has been used to evaluate the exposure safety margin opposite what are considered relevant occupational exposure limits. The methods used for sampling and analysing MDI and TIP are based on internationally accepted methods, i.e. MDHS 25/3 (or ISO 16702) for MDI, and MDHS 14/3 for TIP. The job functions with an increased exposure profile for TIP were the cleaners, drying operators and quality control staff, and for MDI, the cleaners and quality control staff. The areas with an increased exposure profile for TIP are the conveyor area from OSB blender to former area and the OSB press infeed, and for MDI the OSB weigh belt and OSB former bin area. The exposure safety margin opposite the selected exposure limits can be ranked as MDI>TIP>formaldehyde (high margin of safety to low margin of safety), indicating that the use of MDI also reduces the exposure risks to workers during production of CWP compared to formaldehyde. By reducing the airborne TIP concentrations, a respiratory sensitiser, MDI workplace concentrations in general can be reduced further. This can be achieved by improving design and/or maintenance and testing programmes of existing control measures, which should be in place already to effectively control exposure to TIP and formaldehyde. The airborne concentration of MDI at workstations situated after pressing (curing) is regarded as extremely low and likely mainly constituted by workplace emissions from elsewhere in the plant. Copyright © 2010 Elsevier GmbH. All rights reserved.
Nanodrugs: pharmacokinetics and safety

PubMed Central

Onoue, Satomi; Yamada, Shizuo; Chan, Hak-Kim

2014-01-01

To date, various nanodrug systems have been developed for different routes of administration, which include dendrimers, nanocrystals, emulsions, liposomes, solid lipid nanoparticles, micelles, and polymeric nanoparticles. Nanodrug systems have been employed to improve the efficacy, safety, physicochemical properties, and pharmacokinetic/pharmacodynamic profile of pharmaceutical substances. In particular, functionalized nanodrug systems can offer enhanced bioavailability of orally taken drugs, prolonged half-life of injected drugs (by reducing immunogenicity), and targeted delivery to specific tissues. Thus, nanodrug systems might lower the frequency of administration while providing maximized pharmacological effects and minimized systemic side effects, possibly leading to better therapeutic compliance and clinical outcomes. In spite of these attractive pharmacokinetic advantages, recent attention has been drawn to the toxic potential of nanodrugs since they often exhibit in vitro and in vivo cytotoxicity, oxidative stress, inflammation, and genotoxicity. A better understanding of the pharmacokinetic and safety characteristics of nanodrugs and the limitations of each delivery option is necessary for the further development of efficacious nanodrugs with high therapeutic potential and a wide safety margin. This review highlights the recent progress in nanodrug system development, with a focus on the pharmacokinetic advantages and safety challenges. PMID:24591825

Development of U.S. Government General Technical Requirements for UAS Flight Safety Systems Utilizing the Iridium Satellite Constellation

NASA Technical Reports Server (NTRS)

Murray, Jennifer; Birr, Richard

2010-01-01

This slide presentation reviews the development of technical requirements for Unmanned Aircraft Systems (UAS) utilization of the Iridium Satellite Constellation to provide flight safety. The Federal Aviation Authority (FAA) required an over-the-horizon communication standard to guarantee flight safety before permitting widespread UAS flights in the National Air Space (NAS). This is important to ensure reliable control of UASs during loss-link and over-the-horizon scenarios. The core requirement was to utilize a satellite system to send GPS tracking data and other telemetry from a flight vehicle down to the ground. Iridium was chosen as the system because it is one of the only true satellite systems that has world wide coverage, and the service has a highly reliable link margin. The Iridium system, the flight modems, and the test flight are described.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Kristine Barrett; Shannon Bragg-Sitton

The Advanced Light Water Reactor (LWR) Nuclear Fuel Development Research and Development (R&D) Pathway encompasses strategic research focused on improving reactor core economics and safety margins through the development of an advanced fuel cladding system. To achieve significant operating improvements while remaining within safety boundaries, significant steps beyond incremental improvements in the current generation of nuclear fuel are required. Fundamental improvements are required in the areas of nuclear fuel composition, cladding integrity, and the fuel/cladding interaction to allow power uprates and increased fuel burn-up allowance while potentially improving safety margin through the adoption of an “accident tolerant” fuel system thatmore » would offer improved coping time under accident scenarios. With a development time of about 20 – 25 years, advanced fuel designs must be started today and proven in current reactors if future reactor designs are to be able to use them with confidence.« less
A Worst-Case Approach for On-Line Flutter Prediction

NASA Technical Reports Server (NTRS)

Lind, Rick C.; Brenner, Martin J.

1998-01-01

Worst-case flutter margins may be computed for a linear model with respect to a set of uncertainty operators using the structured singular value. This paper considers an on-line implementation to compute these robust margins in a flight test program. Uncertainty descriptions are updated at test points to account for unmodeled time-varying dynamics of the airplane by ensuring the robust model is not invalidated by measured flight data. Robust margins computed with respect to this uncertainty remain conservative to the changing dynamics throughout the flight. A simulation clearly demonstrates this method can improve the efficiency of flight testing by accurately predicting the flutter margin to improve safety while reducing the necessary flight time.
Tailored Excitation for Multivariable Stability-Margin Measurement Applied to the X-31A Nonlinear Simulation

NASA Technical Reports Server (NTRS)

Bosworth, John T.; Burken, John J.

1997-01-01

Safety and productivity of the initial flight test phase of a new vehicle have been enhanced by developing the ability to measure the stability margins of the combined control system and vehicle in flight. One shortcoming of performing this analysis is the long duration of the excitation signal required to provide results over a wide frequency range. For flight regimes such as high angle of attack or hypersonic flight, the ability to maintain flight condition for this time duration is difficult. Significantly reducing the required duration of the excitation input is possible by tailoring the input to excite only the frequency range where the lowest stability margin is expected. For a multiple-input/multiple-output system, the inputs can be simultaneously applied to the control effectors by creating each excitation input with a unique set of frequency components. Chirp-Z transformation algorithms can be used to match the analysis of the results to the specific frequencies used in the excitation input. This report discusses the application of a tailored excitation input to a high-fidelity X-31A linear model and nonlinear simulation. Depending on the frequency range, the results indicate the potential to significantly reduce the time required for stability measurement.
In Space Nuclear Power as an Enabling Technology for Deep Space Exploration

NASA Technical Reports Server (NTRS)

Sackheim, Robert L.; Houts, Michael

2000-01-01

Deep Space Exploration missions, both for scientific and Human Exploration and Development (HEDS), appear to be as weight limited today as they would have been 35 years ago. Right behind the weight constraints is the nearly equally important mission limitation of cost. Launch vehicles, upper stages and in-space propulsion systems also cost about the same today with the same efficiency as they have had for many years (excluding impact of inflation). Both these dual mission constraints combine to force either very expensive, mega systems missions or very light weight, but high risk/low margin planetary spacecraft designs, such as the recent unsuccessful attempts for an extremely low cost mission to Mars during the 1998-99 opportunity (i.e., Mars Climate Orbiter and the Mars Polar Lander). When one considers spacecraft missions to the outer heliopause or even the outer planets, the enormous weight and cost constraints will impose even more daunting concerns for mission cost, risk and the ability to establish adequate mission margins for success. This paper will discuss the benefits of using a safe in-space nuclear reactor as the basis for providing both sufficient electric power and high performance space propulsion that will greatly reduce mission risk and significantly increase weight (IMLEO) and cost margins. Weight and cost margins are increased by enabling much higher payload fractions and redundant design features for a given launch vehicle (higher payload fraction of IMLEO). The paper will also discuss and summarize the recent advances in nuclear reactor technology and safety of modern reactor designs and operating practice and experience, as well as advances in reactor coupled power generation and high performance nuclear thermal and electric propulsion technologies. It will be shown that these nuclear power and propulsion technologies are major enabling capabilities for higher reliability, higher margin and lower cost deep space missions design to reliably reach the outer planets for scientific exploration.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Unwin, Stephen D.; Lowry, Peter P.; Layton, Robert F.

This is a working report drafted under the Risk-Informed Safety Margin Characterization pathway of the Light Water Reactor Sustainability Program, describing statistical models of passives component reliabilities.
Analysis of a Preloaded Bolted Joint in a Ceramic Composite Combustor

NASA Technical Reports Server (NTRS)

Hissam, D. Andy; Bower, Mark V.

2003-01-01

This paper presents the detailed analysis of a preloaded bolted joint incorporating ceramic materials. The objective of this analysis is to determine the suitability of a joint design for a ceramic combustor. The analysis addresses critical factors in bolted joint design including preload, preload uncertainty, and load factor. The relationship between key joint variables is also investigated. The analysis is based on four key design criteria, each addressing an anticipated failure mode. The criteria are defined in terms of margin of safety, which must be greater than zero for the design criteria to be satisfied. Since the proposed joint has positive margins of safety, the design criteria are satisfied. Therefore, the joint design is acceptable.
Consumer and farmer safety evaluation of application of botanical pesticides in black pepper crop protection.

PubMed

Hernández-Moreno, David; Soffers, Ans E M F; Wiratno; Falke, Hein E; Rietjens, Ivonne M C M; Murk, Albertinka J

2013-06-01

This study presents a consumer and farmer safety evaluation on the use of four botanical pesticides in pepper berry crop protection. The pesticides evaluated include preparations from clove, tuba root, sweet flag and pyrethrum. Their safety evaluation was based on their active ingredients being eugenol, rotenone, β-asarone and pyrethrins, respectively. Botanical pesticides from Acorus calamus are of possible concern because of the genotoxic and carcinogenic ingredient β-asarone although estimated margins of exposure (MOE) for consumers indicate a low priority for risk management. For the other three botanical pesticides the margin of safety (MOS) between established acute reference doses and/or acceptable daily intake values and intake estimates for the consumer, resulting from their use as a botanical pesticide are not of safety concern, with the exception for levels of rotenone upon use of tuba root extracts on stored berries. Used levels of clove and pyrethrum as botanical pesticides in pepper berry crop production is not of safety concern for consumers or farmers, whereas for use of tuba root and sweet flag some risk factors were defined requiring further evaluation and/or risk management. It seems prudent to look for alternatives for use of sweet flag extracts containing β-asarone. Copyright © 2013 Elsevier Ltd. All rights reserved.
Current challenges and trends in the discovery of agrochemicals.

PubMed

Lamberth, Clemens; Jeanmart, Stephane; Luksch, Torsten; Plant, Andrew

2013-08-16

Crop protection chemistry has come a long way from its "alchemic" beginnings in the late 19th century to a high-tech science that supports the sustainable production of food, feed, and fiber for a rapidly growing population. Cutting-edge developments in the design and synthesis of agrochemicals help to tackle today's challenges of weed and pest resistance, higher regulatory safety margins, and higher cost of goods with the invention of selective, environmentally benign, low use rate, and cost-effective active ingredients.
The risks of radiation

NASA Astrophysics Data System (ADS)

Miettenen, Jorma K.

1988-01-01

The risks of radioactivity are a really complicated matter, yet they are much better known than are the risks relating to thousands of chemical poisons that occur in our environment. The greatest mistakes are probably made in the definition of safety margins. Except for the bombs dropped in Japan and one other case in the Marshall Islands, there has always—luckily—been a wide safety margin between fallout radiation and doses dangerous to health; the margin has actually been about 1000-fold. The Chernobyl dose of 0.5 mGy/year that we received is only 1/1000 of the acute dose of 0.5 Gy which would cause a slight and nonpermanent change in the blood picture. There is no such safety margin with respect to many air pollutants. The safety standards for sulfuric or nitric oxides, ozone and so on, have been set only just below the level that already causes a health hazard, and these standards are exceeded once in a while. Otherwise, traffic would have to be forbidden and many industrial plants, especially power stations using coal, would have to stop working whenever a low-temperature inversion occurred. Environmental radioactivity does not represent a likely health risk in Finland unless a nuclear war breaks out. Air pollutants, on the contrary, are a real and almost daily health risk that should be carefully considered when decisions about our energy production are being made. In spite of what happened at Chernobyl, global consumption of nuclear power will double by the year 2000, since there are about 140 nuclear power plants presently under construction. It is not likely that another catastrophe like Chernobyl will happen, yet nuclear plant accidents are of course possible, even if their likelihood is diminished by improving reactor safety and even if any eventual damage could be expected to be smaller. If a reactor is hooded by a containment structure, no significant release of radioactive materials should be possible even in case of an accident. However, we must be prepared to protect the population with carefully planned civil defense and radiation protection measures.
LWRS ATR Irradiation Testing Readiness Status

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kristine Barrett

2012-09-01

The Light Water Reactor Sustainability (LWRS) Program was established by the U.S. Department of Energy Office of Nuclear Energy (DOE-NE) to develop technologies and other solutions that can improve the reliability, sustain the safety, and extend the life of the current reactors. The LWRS Program is divided into four R&D Pathways: (1) Materials Aging and Degradation; (2) Advanced Light Water Reactor Nuclear Fuels; (3) Advanced Instrumentation, Information and Control Systems; and (4) Risk-Informed Safety Margin Characterization. This report describes an irradiation testing readiness analysis in preparation of LWRS experiments for irradiation testing at the Idaho National Laboratory (INL) Advanced Testmore » Reactor (ATR) under Pathway (2). The focus of the Advanced LWR Nuclear Fuels Pathway is to improve the scientific knowledge basis for understanding and predicting fundamental performance of advanced nuclear fuel and cladding in nuclear power plants during both nominal and off-nominal conditions. This information will be applied in the design and development of high-performance, high burn-up fuels with improved safety, cladding integrity, and improved nuclear fuel cycle economics« less
Invasive vulvar carcinoma and the question of the surgical margin.

PubMed

Palaia, Innocenza; Bellati, Filippo; Calcagno, Marco; Musella, Angela; Perniola, Giorgia; Panici, Pierluigi B

2011-08-01

To assess the discrepancy between width of surgical margin measured with the naked eye/ruler by a surgeon before removing an invasive vulvar carcinoma, and width of margin measured under microscope by pathologist after fixation of the resected lesion with formalin. Potential relationships between discrepancy and disease recurrence were also investigated. This prospective study was conducted with resected lesions from 86 women who underwent surgery for primary/recurrent invasive vulvar carcinoma. After the surgeon removed the lesions surrounded by 1-2-cm margins, the pathologist determined margin width at the 4 cardinal points of 86 lesions (for a total of 344 margin assessments), first macroscopically and then under the microscope. A safety margin of 0.8 cm on microscopic view was achieved in 83% of cases (112 of 135) when the macroscopic measurement was 1cm, in 91% of cases (58 of 64) when it was 1.5 cm, and 98% of cases (105 of 107) when it was 2 cm. There was a small discrepancy between the surgeon's intent and the microscopic margin measurement, mostly related to tissue shrinkage. A 1-cm surgical margin corresponded to a 0.8-cm margin in microscopic view (the "safe margin") in most cases. Copyright © 2011 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.
Operating without a Safety Net: Gay Male Adolescents and Emerging Adults' Experiences of Marginalization and Migration, and Implications for Theory of Syndemic Production of Health Disparities

ERIC Educational Resources Information Center

Bruce, Douglas; Harper, Gary W.

2011-01-01

Health disparities among gay men (HIV, substance use, depression) have been described as a mutually occurring "syndemic" that is socially produced through two overarching dynamics: marginalization and migration. Although the syndemic theory proposes a developmental trajectory, it has been largely based on epidemiological studies of adult gay men…
Feminist Heuristics: Transforming the Foundation of Food Quality and Safety Assurance Systems

ERIC Educational Resources Information Center

Kimura, Aya Hirata

2012-01-01

Food safety and quality assurance systems have emerged as a key mechanism of food governance in recent years and are also popular among alternative agrofood movements, such as the organic and fair trade movements. Rural sociologists have identified many problems with existing systems, including corporate cooptation, the marginalization of small…
Centrifugal Compressor Surge Margin Improved With Diffuser Hub Surface Air Injection

NASA Technical Reports Server (NTRS)

Skoch, Gary J.

2002-01-01

Aerodynamic stability is an important parameter in the design of compressors for aircraft gas turbine engines. Compression system instabilities can cause compressor surge, which may lead to the loss of an aircraft. As a result, engine designers include a margin of safety between the operating line of the engine and the stability limit line of the compressor. The margin of safety is typically referred to as "surge margin." Achieving the highest possible level of surge margin while meeting design point performance objectives is the goal of the compressor designer. However, performance goals often must be compromised in order to achieve adequate levels of surge margin. Techniques to improve surge margin will permit more aggressive compressor designs. Centrifugal compressor surge margin improvement was demonstrated at the NASA Glenn Research Center by injecting air into the vaned diffuser of a 4:1-pressure-ratio centrifugal compressor. Tests were performed using injector nozzles located on the diffuser hub surface of a vane-island diffuser in the vaneless region between the impeller trailing edge and the diffuser-vane leading edge. The nozzle flow path and discharge shape were designed to produce an air stream that remained tangent to the hub surface as it traveled into the diffuser passage. Injector nozzles were located near the leading edge of 23 of the 24 diffuser vanes. One passage did not contain an injector so that instrumentation located in that passage would be preserved. Several orientations of the injected stream relative to the diffuser vane leading edge were tested over a range of injected flow rates. Only steady flow (nonpulsed) air injection was tested. At 100 percent of the design speed, a 15-percent improvement in the baseline surge margin was achieved with a nozzle orientation that produced a jet that was bisected by the diffuser vane leading edge. Other orientations also improved the baseline surge margin. Tests were conducted at speeds below the design speed, and similar results were obtained. In most cases, the greatest improvement in surge margin occurred at fairly low levels of injected flow rate. Externally supplied injection air was used in these experiments. However, the injected flow rates that provided the greatest benefit could be produced using injection air that is recirculating between the diffuser discharge and nozzles located in the diffuser vaneless region. Future experiments will evaluate the effectiveness of recirculating air injection.
On the required complexity of vehicle dynamic models for use in simulation-based highway design.

PubMed

Brown, Alexander; Brennan, Sean

2014-06-01

This paper presents the results of a comprehensive project whose goal is to identify roadway design practices that maximize the margin of safety between the friction supply and friction demand. This study is motivated by the concern for increased accident rates on curves with steep downgrades, geometries that contain features that interact in all three dimensions - planar curves, grade, and superelevation. This complexity makes the prediction of vehicle skidding quite difficult, particularly for simple simulation models that have historically been used for road geometry design guidance. To obtain estimates of friction margin, this study considers a range of vehicle models, including: a point-mass model used by the American Association of State Highway Transportation Officials (AASHTO) design policy, a steady-state "bicycle model" formulation that considers only per-axle forces, a transient formulation of the bicycle model commonly used in vehicle stability control systems, and finally, a full multi-body simulation (CarSim and TruckSim) regularly used in the automotive industry for high-fidelity vehicle behavior prediction. The presence of skidding--the friction demand exceeding supply--was calculated for each model considering a wide range of vehicles and road situations. The results indicate that the most complicated vehicle models are generally unnecessary for predicting skidding events. However, there are specific maneuvers, namely braking events within lane changes and curves, which consistently predict the worst-case friction margins across all models. This suggests that any vehicle model used for roadway safety analysis should include the effects of combined cornering and braking. The point-mass model typically used by highway design professionals may not be appropriate to predict vehicle behavior on high-speed curves during braking in low-friction situations. However, engineers can use the results of this study to help select the appropriate vehicle dynamic model complexity to use in the highway design process. Copyright © 2014 Elsevier Ltd. All rights reserved.
Safety of fenbendazole in Chinese ring-necked pheasants (Phasianus colchicus).

PubMed

Griffith, R; Yaeger, M; Hostetter, S; Tell, L A; Wetzlich, S; Vickroy, T; Lillie, B; MacFarlane, W; Laudenslager, T; Whitley, E; Dzikamunhenga, R; Larson, W

2014-03-01

Ring-necked pheasants raised on propagation farms can be severely parasitized with Syngamus trachea (gapeworm) and other parasitic worms. Fenbendazole is a highly effective benzimidazole-class anthelmintic that is not currently approved for game bird species in the United States. The objective of this work was to provide target animal safety data to support a label claim for fenbendazole in pheasants at 100 parts per million (ppm) in the feed for 7 consecutive days. Demonstration of safety in young pheasants and a separate demonstration of reproductive safety in adult birds were required. In the young bird study, 160 Chinese ring-necked pheasants (Phasianus colchicus, 80 males and 80 females) were fed a commercial game bird starter ration containing no antibiotics, growth promoters, or coccidiostats until day 0 of the study (approximately 21 days of age). On day 0 the birds were placed on their respective study diets containing fenbendazole at 0, 100, 300, and 500 ppm for 21 days (three times the normal treatment duration). Clinical observations were recorded twice daily. Feed consumption, feed conversion rate, and body weights were determined for each pen. Three birds from each pen were randomly selected for necropsy, histopathology, and clinical pathology. Birds were carefully examined for feathering abnormalities immediately following euthanasia. The remaining birds in each pen were submitted for drug concentration analysis so that concentrations (for low vs. high treatment levels) could be correlated with clinical observations, clinical pathology, and histologic findings. There no morbidities or mortalities after study day--1. There were no statistically significant treatment-related differences in feed consumption, feed conversion rates, body weights, serum biochemistry profiles, hematologic profiles, gross necropsy findings, histopathologic examination, and feathering. Allowable liver and muscle concentrations of fenbendazole sulfone in turkeys are 6 and 2 ppm, respectively, with a 6-hr feed withdrawal. Analysis of fenbendazole concentrations in kidney, liver, leg/thigh, and breast muscle and skin with associated fat revealed that, even at the highest dose level used and with no feed withdrawal, fenbendazole concentrations were relatively low in these tissues. These findings indicate that fenbendazole has a relatively wide margin of safety in young pheasants and that the proposed dose of 100 ppm in the feed for 7 consecutive days is well within the margin of safety. In the reproductive safety study, two large game bird farms fed fendbendazole at 100 ppm for 7 days and collected data on hatching percentage of pheasant eggs before and after treatment. Reproductive performance in hen pheasants was not adversely affected.
Modeling of a Flooding Induced Station Blackout for a Pressurized Water Reactor Using the RISMC Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Prescott, Steven R; Smith, Curtis L

2011-07-01

In the Risk Informed Safety Margin Characterization (RISMC) approach we want to understand not just the frequency of an event like core damage, but how close we are (or are not) to key safety-related events and how might we increase our safety margins. The RISMC Pathway uses the probabilistic margin approach to quantify impacts to reliability and safety by coupling both probabilistic (via stochastic simulation) and mechanistic (via physics models) approaches. This coupling takes place through the interchange of physical parameters and operational or accident scenarios. In this paper we apply the RISMC approach to evaluate the impact of amore » power uprate on a pressurized water reactor (PWR) for a tsunami-induced flooding test case. This analysis is performed using the RISMC toolkit: RELAP-7 and RAVEN codes. RELAP-7 is the new generation of system analysis codes that is responsible for simulating the thermal-hydraulic dynamics of PWR and boiling water reactor systems. RAVEN has two capabilities: to act as a controller of the RELAP-7 simulation (e.g., system activation) and to perform statistical analyses (e.g., run multiple RELAP-7 simulations where sequencing/timing of events have been changed according to a set of stochastic distributions). By using the RISMC toolkit, we can evaluate how power uprate affects the system recovery measures needed to avoid core damage after the PWR lost all available AC power by a tsunami induced flooding. The simulation of the actual flooding is performed by using a smooth particle hydrodynamics code: NEUTRINO.« less
Retrospective analysis of mode survival, reliability of atrial sensing and incidence of atrial tachyarrhythmias in 307 single-lead VDD pacemaker patients.

PubMed

Zupan, Igor; Lipar, Luka; Zizek, David; Boute, Wim; Vidmar, Masa; Gabrijelcic, Tone; Rakovec, Peter; Brecelj, Ales

2006-10-01

The aim of this retrospective analysis was to investigate VDD mode survival, development of atrial tachyarrhythmias (AT), and long-term atrial sensing performance of VDD pacing systems. We implanted single-lead VDD pacemakers in patients with isolated atrioventricular block and performed a retrospective analysis of 307 patients who had their devices implanted between May 1994 and September 2001. In 39 patients (12.7%), the pacing mode had to be reprogrammed to a single-chamber ventricular pacing mode, mostly due to permanent AT. In 16 of these patients, the atrial sensing safety margin was less than 150%. The atrial sensing safety margin was insufficient, i.e. less than 100% in only seven patients. Although only 12 (3.9%) of the patients had a history of paroxysmal AT at the time of pacemaker implantation, 200 (65%) patients presented with AT during follow-up. The mean AT burden at the last follow-up was 2.5%. These data illustrate that single-lead VDD pacemakers can be applied without serious complications in a highly selected group of patients. Our main concern is the development of AT in a large part of our population. Over a 10-year period, two thirds of our patients presented with AT.
41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2013 CFR

2013-07-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...

41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2012 CFR

2012-01-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...
41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2014 CFR

2014-01-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...
41 CFR 102-80.115 - Is there more than one option for establishing that an equivalent level of safety exists?

Code of Federal Regulations, 2011 CFR

2011-01-01

..., complete sprinkler protection can be expected to prevent flashover in the room of fire origin, limit fire... the times required for egress. If a combination of fire protection systems provides a margin of safety... Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL...
DriveID: safety innovation through individuation.

PubMed

Sawyer, Ben; Teo, Grace; Mouloua, Mustapha

2012-01-01

The driving task is highly complex and places considerable perceptual, physical and cognitive demands on the driver. As driving is fundamentally an information processing activity, distracted or impaired drivers have diminished safety margins compared with non- distracted drivers (Hancock and Parasuraman, 1992; TRB 1998 a & b). This competition for sensory and decision making capacities can lead to failures that cost lives. Some groups, teens and elderly drivers for example, have patterns of systematically poor perceptual, physical and cognitive performance while driving. Although there are technologies developed to aid these different drivers, these systems are often misused and underutilized. The DriveID project aims to design and develop a passive, automated face identification system capable of robustly identifying the driver of the vehicle, retrieve a stored profile, and intelligently prescribing specific accident prevention systems and driving environment customizations.
Follow-up on hang gliding injuries in Colorado.

PubMed

Krissoff, W B

1976-01-01

In a period extending from July 1973 to December 1975, seven fatal hang glider accidents were recorded in Colorado, all among experienced pilots. In addition, 11 serious nonfatal injuries were reported, which may represent only a fraction of those occurring. Accidents were noted to be multifactorial, caused by (1) pilot error, (2) equipment failure, (3) terrain hazards, and (4) possible design shortcomings. Accidents can be expected to decline in frequency with improved pilot training programs, grading and regulation of sites, and standardized safety clothing. No doubt over time, the less safe standard Rogallo wing will be replaced by the more stable Superkites and controlled collapsibles, which offer a higher safety margin. In the last analysis, this sport will remain a popular yet high risk endeavor (Figs. 2 through 5).
Safety and Suitability for Service Assessment Testing for Aircraft Launched Munitions

DTIC Science & Technology

2013-07-01

2013 12 benefits in terms of cost and test efficiency that tend to associate the Analytical S3 Test Approach with complex missile systems and the... systems containing expensive, non-safety related components. c. When using the Analytical S3 Test Approach for aircraft launched bombs, full BTCA is...establish safety margin of the system . Details of the Empirical Test Flow with full and reduced BTCA options are provided in Appendix B, Annexes 3 and
A risk assessment of topical tretinoin as a potential human developmental toxin based on animal and comparative human data.

PubMed

Johnson, E M

1997-03-01

Although topically applied all-trans-retinoic acid (tretinoin) undergoes minimal absorption and adds negligibly to normal endogenous levels, its safety in humans is occasionally questioned because oral ingestion of retinoids at therapeutic levels is known to entail teratogenic risks. To assess the actual potential for developmental toxicity from treatment with topical tretinoin. Risk assessments were conducted on four known human developmental toxicants (valproic acid, methotrexate, thalidomide, and isotretinoin) and a potential developmental toxicant (acetylsalicylic acid). The margin of safety for each chemical was calculated from the ratio of animal no-observed adverse effect levels to human lowest-observed adverse effect levels or estimated exposure doses. The derived safety margin of more than 100 for topical tretinoin (with 2% absorption) contrasted sharply with the near unity values for valproic acid, methotrexate, thalidomide, and isotretinoin and was larger than that for acetylsalicylic acid. These data support other epidemiologic and animal data that topical tretinoin is not a potential human developmental toxicant.
Pharmacokinetic drivers of toxicity for basic molecules: Strategy to lower pKa results in decreased tissue exposure and toxicity for a small molecule Met inhibitor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diaz, Dolores, E-mail: diaz.dolores@gene.com; Ford, Kevin A.; Hartley, Dylan P.

Several toxicities are clearly driven by free drug concentrations in plasma, such as toxicities related to on-target exaggerated pharmacology or off-target pharmacological activity associated with receptors, enzymes or ion channels. However, there are examples in which organ toxicities appear to correlate better with total drug concentrations in the target tissues, rather than with free drug concentrations in plasma. Here we present a case study in which a small molecule Met inhibitor, GEN-203, with significant liver and bone marrow toxicity in preclinical species was modified with the intention of increasing the safety margin. GEN-203 is a lipophilic weak base as demonstratedmore » by its physicochemical and structural properties: high LogD (distribution coefficient) (4.3) and high measured pKa (7.45) due to the basic amine (N-ethyl-3-fluoro-4-aminopiperidine). The physicochemical properties of GEN-203 were hypothesized to drive the high distribution of this compound to tissues as evidenced by a moderately-high volume of distribution (Vd > 3 l/kg) in mouse and subsequent toxicities of the compound. Specifically, the basicity of GEN-203 was decreased through addition of a second fluorine in the 3-position of the aminopiperidine to yield GEN-890 (N-ethyl-3,3-difluoro-4-aminopiperidine), which decreased the volume of distribution of the compound in mouse (Vd = 1.0 l/kg), decreased its tissue drug concentrations and led to decreased toxicity in mice. This strategy suggests that when toxicity is driven by tissue drug concentrations, optimization of the physicochemical parameters that drive tissue distribution can result in decreased drug concentrations in tissues, resulting in lower toxicity and improved safety margins. -- Highlights: ► Lower pKa for a small molecule: reduced tissue drug levels and toxicity. ► New analysis tools to assess electrostatic effects and ionization are presented. ► Chemical and PK drivers of toxicity can be leveraged to improve safety.« less
Design and analysis of lifting tool assemblies to lift different engine block

NASA Astrophysics Data System (ADS)

Sawant, Arpana; Deshmukh, Nilaj N.; Chauhan, Santosh; Dabhadkar, Mandar; Deore, Rupali

2017-07-01

Engines block are required to be lifted from one place to another while they are being processed. The human effort required for this purpose is more and also the engine block may get damaged if it is not handled properly. There is a need for designing a proper lifting tool which will be able to conveniently lift the engine block and place it at the desired position without any accident and damage to the engine block. In the present study lifting tool assemblies are designed and analyzed in such way that it may lift different categories of engine blocks. The lifting tool assembly consists of lifting plate, lifting ring, cap screws and washers. A parametric model and assembly of Lifting tool is done in 3D modelling software CREO 2.0 and analysis is carried out in ANSYS Workbench 16.0. A test block of weight equivalent to that of an engine block is considered for the purpose of analysis. In the preliminary study, without washer the stresses obtained on the lifting tool were more than the safety margin. In the present design, washers were used with appropriate dimensions which helps to bring down the stresses on the lifting tool within the safety margin. Analysis is carried out to verify that tool design meets the ASME BTH-1 required safety margin.
Determining the safety of enzymes used in animal feed.

PubMed

Pariza, Michael W; Cook, Mark

2010-04-01

The purpose of this paper is to provide guidance for evaluating the safety of enzyme preparations used in animal feed. Feed enzymes are typically added to animal feed to increase nutrient bioavailability by acting on feed components prior to or after consumption, i.e., within the gastrointestinal tract. In contrast, food processing enzymes are generally used during processing and then inactivated or removed prior to consumption. The enzymes used in both applications are almost always impure mixtures of active enzyme and other metabolites from the production strain, hence similar safety evaluation procedures for both are warranted. We propose that the primary consideration should be the safety of the production strain and that the decision tree mechanism developed previously for food processing enzymes (Pariza and Johnson, 2001) is appropriate for determining the safety of feed enzymes. Thoroughly characterized non-pathogenic, non-toxigenic microbial strains with a history of safe use in enzyme manufacture are also logical candidates for generating safe strain lineages, from which additional strains may be derived via genetic modification by traditional and non-traditional strategies. For new feed enzyme products derived from a safe strain lineage, it is important to ensure a sufficiently high safety margin for the intended use, and that the product complies with appropriate specifications for chemical and microbial contamination. Copyright 2009 Elsevier Inc. All rights reserved.
Caught in the competitive crossfire: safety-net providers balance margin and mission in a profit-driven health care market.

PubMed

Cunningham, Peter J; Bazzoli, Gloria J; Katz, Aaron

2008-01-01

This paper describes how intensifying competitive pressures in the health system are simultaneously driving increased demand for safety-net care and taxing safety-net providers' ability to maintain the mission of serving all, regardless of ability to pay. Although safety-net providers adapted to previous challenges arising from managed care, health system pressures have been more intense and more generalized across different sectors in recent years than in the past. Providers are adopting some of the same strategies being used in the private sector to attract higher-paying patients and changing their "image" as a safety-net provider.
DETERMINATION OF THE APPROPRIATE FQPA SAFETY FACTOR(S) IN THE ORGANOPHOSPHOROUS PESTICIDE CUMULATIVE RISK ASSESSMENT: SUSCEPTIBILITY AND SENSITIVITY TO THE COMMON MECHANISM, ACETYLCHOLINESTERASE INHIBITION

EPA Science Inventory

The Food Quality Protection Act of 1996 (FQPA) directs EPA, in setting pesticide tolerances, to use an additional tenfold margin of safety to protect infants and children taking into account the potential for pre- and postnatal toxicity and the completeness of the toxicology and ...
Negotiating place and gendered violence in Canada's largest open drug scene.

PubMed

McNeil, Ryan; Shannon, Kate; Shaver, Laura; Kerr, Thomas; Small, Will

2014-05-01

Vancouver's Downtown Eastside is home to Canada's largest street-based drug scene and only supervised injection facility (Insite). High levels of violence among men and women have been documented in this neighbourhood. This study was undertaken to explore the role of violence in shaping the socio-spatial relations of women and 'marginal men' (i.e., those occupying subordinate positions within the drug scene) in the Downtown Eastside, including access to Insite. Semi-structured qualitative interviews were conducted with 23 people who inject drugs (PWID) recruited through the Vancouver Area Network of Drug Users, a local drug user organization. Interviews included a mapping exercise. Interview transcripts and maps were analyzed thematically, with an emphasis on how gendered violence shaped participants' spatial practices. Hegemonic forms of masculinity operating within the Downtown Eastside framed the everyday violence experienced by women and marginal men. This violence shaped the spatial practices of women and marginal men, in that they avoided drug scene milieus where they had experienced violence or that they perceived to be dangerous. Some men linked their spatial restrictions to the perceived 'dope quality' of neighbourhood drug dealers to maintain claims to dominant masculinities while enacting spatial strategies to promote safety. Environmental supports provided by health and social care agencies were critical in enabling women and marginal men to negotiate place and survival within the context of drug scene violence. Access to Insite did not motivate participants to enter into "dangerous" drug scene milieus but they did venture into these areas if necessary to obtain drugs or generate income. Gendered violence is critical in restricting the geographies of men and marginal men within the street-based drug scene. There is a need to scale up existing environmental interventions, including supervised injection services, to minimize violence and potential drug-related risks among these highly-vulnerable PWID. Copyright © 2013 Elsevier B.V. All rights reserved.
NEGOTIATING PLACE AND GENDERED VIOLENCE IN CANADA’S LARGEST OPEN DRUG SCENE

PubMed Central

McNeil, Ryan; Shannon, Kate; Shaver, Laura; Kerr, Thomas; Small, Will

2014-01-01

Background Vancouver’s Downtown Eastside is home to Canada’s largest street-based drug scene and only supervised injection facility (Insite). High levels of violence among men and women have been documented in this neighbourhood. This study was undertaken to explore the role of violence in shaping the socio-spatial relations of women and ‘marginal men’ (i.e., those occupying subordinate positions within the drug scene) in the Downtown Eastside, including access to Insite. Methods Semi-structured qualitative interviews were conducted with 23 people who inject drugs (PWID) recruited through the Vancouver Area Network of Drug Users, a local drug user organization. Interviews included a mapping exercise. Interview transcripts and maps were analyzed thematically, with an emphasis on how gendered violence shaped participants’ spatial practices. Results Hegemonic forms of masculinity operating within the Downtown Eastside framed the everyday violence experienced by women and marginal men. This violence shaped the spatial practices of women and marginal men, in that they avoided drug scene milieus where they had experienced violence or that they perceived to be dangerous. Some men linked their spatial restrictions to the perceived 'dope quality' of neighbourhood drug dealers to maintain claims to dominant masculinities while enacting spatial strategies to promote safety. Environmental supports provided by health and social care agencies were critical in enabling women and marginal men to negotiate place and survival within the context of drug scene violence. Access to Insite did not motivate participants to enter into “dangerous” drug scene milieus but they did venture into these areas if necessary to obtain drugs or generate income. Conclusion Gendered violence is critical in restricting the geographies of men and marginal men within the street-based drug scene. There is a need to scale up existing environmental interventions, including supervised injection services, to minimize violence and potential drug-related risks among these highly-vulnerable PWID. PMID:24332972
Orion MPCV Touchdown Detection Threshold Development and Testing

NASA Technical Reports Server (NTRS)

Daum, Jared; Gay, Robert

2013-01-01

A robust method of detecting Orion Multi ]Purpose Crew Vehicle (MPCV) splashdown is necessary to ensure crew and hardware safety during descent and after touchdown. The proposed method uses a triple redundant system to inhibit Reaction Control System (RCS) thruster firings, detach parachute risers from the vehicle, and transition to the post ]landing segment of the Flight Software (FSW). The vehicle crew is the prime input for touchdown detection, followed by an autonomous FSW algorithm, and finally a strictly time based backup timer. RCS thrusters must be inhibited before submersion in water to protect against possible damage due to firing these jets under water. In addition, neglecting to declare touchdown will not allow the vehicle to transition to post ]landing activities such as activating the Crew Module Up ]righting System (CMUS), resulting in possible loss of communication and difficult recovery. A previous AIAA paper gAssessment of an Automated Touchdown Detection Algorithm for the Orion Crew Module h concluded that a strictly Inertial Measurement Unit (IMU) based detection method using an acceleration spike algorithm had the highest safety margins and shortest detection times of other methods considered. That study utilized finite element simulations of vehicle splashdown, generated by LS ]DYNA, which were expanded to a larger set of results using a Kriging surface fit. The study also used the Decelerator Systems Simulation (DSS) to generate flight dynamics during vehicle descent under parachutes. Proto ]type IMU and FSW MATLAB models provided the basis for initial algorithm development and testing. This paper documents an in ]depth trade study, using the same dynamics data and MATLAB simulations as the earlier work, to further develop the acceleration detection method. By studying the combined effects of data rate, filtering on the rotational acceleration correction, data persistence limits and values of acceleration thresholds, an optimal configuration was determined. The lever arm calculation, which removes the centripetal acceleration caused by vehicle rotation, requires that the vehicle angular acceleration be derived from vehicle body rates, necessitating the addition of a 2nd order filter to smooth the data. It was determined that using 200 Hz data directly from the vehicle IMU outperforms the 40 Hz FSW data rate. Data persistence counter values and acceleration thresholds were balanced in order to meet desired safety and performance. The algorithm proved to exhibit ample safety margin against early detection while under parachutes, and adequate performance upon vehicle splashdown. Fall times from algorithm initiation were also studied, and a backup timer length was chosen to provide a large safety margin, yet still trigger detection before CMUS inflation. This timer serves as a backup to the primary acceleration detection method. Additionally, these parameters were tested for safety on actual flight test data, demonstrating expected safety margins.
No-Touch Radiofrequency Ablation: A Comparison of Switching Bipolar and Switching Monopolar Ablation in Ex Vivo Bovine Liver

PubMed Central

Chang, Won; Lee, Sang Min; Han, Joon Koo

2017-01-01

Objective To evaluate the feasibility, efficiency, and safety of no-touch switching bipolar (SB) and switching monopolar (SM) radiofrequency ablation (RFA) using ex vivo bovine livers. Materials and Methods A pork loin cube was inserted as a tumor mimicker in the bovine liver block; RFA was performed using the no-touch technique in the SM (group A1; 10 minutes, n = 10, group A2; 15 minutes, n = 10) and SB (group B; 10 minutes, n = 10) modes. The groups were compared based on the creation of confluent necrosis with sufficient safety margins, the dimensions, and distance between the electrode and ablation zone margin (DEM). To evaluate safety, small bowel loops were placed above the liver surface and 30 additional ablations were performed in the same groups. Results Confluent necroses with sufficient safety margins were created in all specimens. SM RFA created significantly larger volumes of ablation compared to SB RFA (all p < 0.001). The DEM of group B was significantly lower than those of groups A1 and A2 (all p < 0.001). Although thermal injury to the small bowel was noted in 90%, 100%, and 30% of the cases in groups A1, A2, and B, respectively, full depth injury was noted only in 60% of group A2 cases. Conclusion The no-touch RFA technique is feasible in both the SB and SM modes; however, SB RFA appears to be more advantageous compared to SM RFA in the creation of an ablation zone while avoiding the unnecessary creation of an adjacent parenchymal ablation zone or adjacent small bowel injuries. PMID:28246508
Patient positioning in head and neck cancer : Setup variations and safety margins in helical tomotherapy.

PubMed

Leitzen, Christina; Wilhelm-Buchstab, Timo; Müdder, Thomas; Heimann, Martina; Koch, David; Schmeel, Christopher; Simon, Birgit; Stumpf, Sabina; Vornholt, Susanne; Garbe, Stephan; Röhner, Fred; Schoroth, Felix; Schild, Hans Heinz; Schüller, Heinrich

2018-05-01

To evaluate the interfractional variations of patient positioning during intensity-modulated radiotherapy (IMRT) with helical tomotherapy in head and neck cancer and to calculate the required safety margins (sm) for bony landmarks resulting from the necessary table adjustments. In all, 15 patients with head and neck cancer were irradiated using the Hi-Art II tomotherapy system between April and September 2016. Before therapy sessions, patient position was frequently checked by megavolt computed tomography (MV-CT). Necessary table adjustments (ta) in the right-left (rl), superior-inferior (si) and anterior-posterior (ap) directions were recorded for four anatomical points: second, fourth and sixth cervical vertebral body (CVB), anterior nasal spine (ANS). Based upon these data sm were calculated for non-image-guided radiotherapy, image-guided radiotherapy (IGRT) and image guidance limited to a shortened area (CVB 2). Based upon planning CT the actual treatment required ta from -0.05 ± 1.31 mm for CVB 2 (ap) up to 2.63 ± 2.39 mm for ANS (rl). Considering the performed ta resulting from image control (MV-CT) we detected remaining ta from -0.10 ± 1.09 mm for CVB 4 (rl) up to 1.97 ± 1.64 mm for ANS (si). After theoretical adjustment of patients position to CVB 2 the resulting ta ranged from -0.11 ± 2.44 mm for CVB6 (ap) to 2.37 ± 2.17 mm for ANS (si). These data imply safety margins: uncorrected patient position: 3.63-9.95 mm, corrected positioning based upon the whole target volume (IGRT): 1.85-6.63 mm, corrected positioning based upon CVB 2 (IGRT): 3.13-6.66 mm. The calculated safety margins differ between anatomic regions. Repetitive and frequent image control of patient positioning is necessary that, however, possibly may be focussed on a limited region.
A High-Fidelity Simulation of a Generic Commercial Aircraft Engine and Controller

NASA Technical Reports Server (NTRS)

May, Ryan D.; Csank, Jeffrey; Lavelle, Thomas M.; Litt, Jonathan S.; Guo, Ten-Huei

2010-01-01

A new high-fidelity simulation of a generic 40,000 lb thrust class commercial turbofan engine with a representative controller, known as CMAPSS40k, has been developed. Based on dynamic flight test data of a highly instrumented engine and previous engine simulations developed at NASA Glenn Research Center, this non-proprietary simulation was created especially for use in the development of new engine control strategies. C-MAPSS40k is a highly detailed, component-level engine model written in MATLAB/Simulink (The MathWorks, Inc.). Because the model is built in Simulink, users have the ability to use any of the MATLAB tools for analysis and control system design. The engine components are modeled in C-code, which is then compiled to allow faster-than-real-time execution. The engine controller is based on common industry architecture and techniques to produce realistic closed-loop transient responses while ensuring that no safety or operability limits are violated. A significant feature not found in other non-proprietary models is the inclusion of transient stall margin debits. These debits provide an accurate accounting of the compressor surge margin, which is critical in the design of an engine controller. This paper discusses the development, characteristics, and capabilities of the C-MAPSS40k simulation
Hydraulics of high-yield orchard trees: a case study of three Malus domestica cultivars.

PubMed

Beikircher, Barbara; De Cesare, Chiara; Mayr, Stefan

2013-12-01

The drought tolerance of three economically important apple cultivars, Golden Delicious, Braeburn and Red Delicious, was analysed. The work offers insights into the hydraulics of these high-yield trees and indicates a possible hydraulic limitation of carbon gain. The hydraulic safety and efficiency of branch xylem and leaves were quantified, drought tolerance of living tissues was measured and stomatal regulation, turgor-loss point and osmotic potential at full turgor were analysed. Physiological measurements were correlated with anatomical parameters, such as conduit diameter, cell-wall reinforcement, stomatal density and stomatal pore length. Hydraulic safety differed considerably between the three cultivars with Golden Delicious being significantly less vulnerable to drought-induced embolism than Braeburn and Red Delicious. In Golden Delicious, leaves were less resistant than branch xylem, while in the other cultivars leaves were more resistant than branch xylem. Hydraulic efficiency and xylem anatomical measurements indicate differences in pit properties, which may also be responsible for variations in hydraulic safety. In all three cultivars, full stomatal closure occurred at water potentials where turgor had already been lost and severe loss of hydraulic conductivity as well as damage to living cells had been induced. The consequential negative safety margins pose a risk for hydraulic failure but facilitate carbon gain, which is further improved by the observed high stomatal conductance. Maximal stomatal conductance was clearly seen to be related to stomatal density and size. Based on our results, these three high-yield Malus domestica Borkh. cultivars span a wide range of drought tolerances, appear optimized for maximal carbon gain and, thus, all perform best under well-managed growing conditions.
[Soft tissue sarcoma of the upper extremities. Analysis of factors relevant for prognosis in 160 patients].

PubMed

Lehnhardt, M; Hirche, C; Daigeler, A; Goertz, O; Ring, A; Hirsch, T; Drücke, D; Hauser, J; Steinau, H U

2012-02-01

Soft tissue sarcomas (STS) are a rare entity with reduced prognosis due to their aggressive biology. For an optimal treatment of STS identification of independent prognostic factors is crucial in order to reduce tumor-related mortality and recurrence rates. The surgical oncological concept includes wide excisions with resection safety margins >1 cm which enables acceptable functional results and reduced rates of amputation of the lower extremities. In contrast, individual anatomy of the upper extremities, in particular of the hand, leads to an intentional reduction of resection margins in order to preserve the extremity and its function with the main intention of tumor-free resection margins. In this study, the oncological safety and outcome as well as functional results were validated by a retrospective analysis of survival rate, recurrence rate and potential prognostic factors. A total of 160 patients who had been treated for STS of the upper extremities were retrospectively included. Independent prognostic factors were analyzed (primary versus recurrent tumor, tumor size, resection status, grade of malignancy, additional therapy, localization in the upper extremity). Kaplan-Meier analyses for survival rate and local control were calculated. Further outcome measures were functional results validated by the DASH score and rate of amputation. In 130 patients (81%) wide tumor excision (R0) was performed and in 19 patients (12%) an amputation was necessary. The 5-year overall survival rate was 70% and the 5-year survival rate in primary tumors was 81% whereas in recurrences 55% relapsed locally. The 10-year overall survival rate was 45% and the 5-year recurrence rate was 18% for primary STS and 43% for recurrent STS. Variance analysis revealed primary versus recurrent tumor, tumor size, resection status and grade of malignancy as independent prognostic factors. Analysis of functional results showed a median DASH score of 37 (0-100; 0=contralateral extremity). The 5-year survival and local recurrence rates are comparable to STS wide resections with safety margins >1 cm for the lower extremities and the trunk. Analysis of prognostic factors revealed resection status and the tumor-free resection margins to be the main goals in STS resection of upper extremity.

Novel safety floors do not influence early compensatory balance reactions in older adults.

PubMed

Wright, Alexander D; Heckman, George A; McIlroy, William E; Laing, Andrew C

2014-01-01

Novel safety flooring systems are a promising approach for reducing fall-related injuries in seniors, as they have been demonstrated to substantially reduce impact severity during falls, while minimally impairing balance control in community-dwelling older women. This pilot study aimed to characterize the potential effects of flooring conditions on dynamic balance control in retirement home-dwellers with more limited mobility. A tether-release paradigm was used to simulate a trip-type perturbation in 15 seniors across five flooring surfaces (three novel safety floors and one carpet compared to institutional-grade resilient rolled-sheeting). Kinetic and kinematic data tracked the displacement profiles of the underfoot centre-of-pressure and whole-body centre-of-mass, which were used to characterize compensatory balance reactions. Difference tests (ANOVA) found that the onset of the compensatory balance reaction was not associated with floor condition, nor were the timing and magnitude of peak centre-of-pressure excursion (minimum margin of safety) and velocity. Accordingly, the minimum margin of safety of the centre-of-mass was not significantly different across floors. Equivalence tests supported these findings. This study provides evidence that the carpet and novel safety floors tested do not negatively influence characteristics of initial dynamic balance responses following a lean-and-release perturbation compared to an institutional-grade resilient rolled-sheeting surface. In combination with reports of substantial force attenuative properties during fall-related impacts, these findings support the promise of novel safety floors as a biomechanically effective strategy for reducing fall-related injuries. Crown Copyright © 2014. Published by Elsevier B.V. All rights reserved.
Structural design/margin assessment

NASA Technical Reports Server (NTRS)

Ryan, R. S.

1993-01-01

Determining structural design inputs and the structural margins following design completion is one of the major activities in space exploration. The end result is a statement of these margins as stability, safety factors on ultimate and yield stresses, fracture limits (fracture control), fatigue lifetime, reuse criteria, operational criteria and procedures, stability factors, deflections, clearance, handling criteria, etc. The process is normally called a load cycle and is time consuming, very complex, and involves much more than structures. The key to successful structural design is the proper implementation of the process. It depends on many factors: leadership and management of the process, adequate analysis and testing tools, data basing, communications, people skills, and training. This process and the various factors involved are discussed.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Bouchard, P.J.

A forthcoming revision to the R6 Leak-before-Break Assessment Procedure is briefly described. Practical application of the LbB concepts to safety-critical nuclear plant is illustrated by examples covering both low temperature and high temperature (>450{degrees}C) operating regimes. The examples highlight a number of issues which can make the development of a satisfactory LbB case problematic: for example, coping with highly loaded components, methodology assumptions and the definition of margins, the effect of crack closure owing to weld residual stresses, complex thermal stress fields or primary bending fields, the treatment of locally high stresses at crack intersections with free surfaces, the choicemore » of local limit load solution when predicting ligament breakthrough, and the scope of calculations required to support even a simplified LbB case for high temperature steam pipe-work systems.« less
Airframe/TPS Session

NASA Technical Reports Server (NTRS)

Welch, Sharon; Bowles, David

2000-01-01

This viewgraph presentation gives an overview of the second generation Reusable Launch Vehicle (RLV) airframe configuration, including details on the structures and materials, tanks, airframe/cryotank demonstrations, internal assemblies, weight growth and margin, and safety and cost requirements.
Gross mismatch between thermal tolerances and environmental temperatures in a tropical freshwater snail: climate warming and evolutionary implications.

PubMed

Polgar, Gianluca; Khang, Tsung Fei; Chua, Teddy; Marshall, David J

2015-01-01

The relationship between acute thermal tolerance and habitat temperature in ectotherm animals informs about their thermal adaptation and is used to assess thermal safety margins and sensitivity to climate warming. We studied this relationship in an equatorial freshwater snail (Clea nigricans), belonging to a predominantly marine gastropod lineage (Neogastropoda, Buccinidae). We found that tolerance of heating and cooling exceeded average daily maximum and minimum temperatures, by roughly 20°C in each case. Because habitat temperature is generally assumed to be the main selective factor acting on the fundamental thermal niche, the discordance between thermal tolerance and environmental temperature implies trait conservation following 'in situ' environmental change, or following novel colonisation of a thermally less-variable habitat. Whereas heat tolerance could relate to an historical association with the thermally variable and extreme marine intertidal fringe zone, cold tolerance could associate with either an ancestral life at higher latitudes, or represent adaptation to cooler, higher-altitudinal, tropical lotic systems. The broad upper thermal safety margin (difference between heat tolerance and maximum environmental temperature) observed in this snail is grossly incompatible with the very narrow safety margins typically found in most terrestrial tropical ectotherms (insects and lizards), and hence with the emerging prediction that tropical ectotherms, are especially vulnerable to environmental warming. A more comprehensive understanding of climatic vulnerability of animal ectotherms thus requires greater consideration of taxonomic diversity, ecological transition and evolutionary history. Copyright © 2014 Elsevier Ltd. All rights reserved.
Using community-based methods and a social ecological framework to explore workplace health and safety of bloqueros on the Olympic Peninsula.

PubMed

Campe, Joseph; Hoare, Lesley; Hagopian, Amy; Keifer, Matthew

2011-06-01

Occupational health and safety issues among Latino immigrants are increasingly important as increased immigration has led to a burgeoning workforce with limited English language skills or lack of documentation status. Foreign-born Latino immigrants are consistently the ethnic group with the highest occupational mortality rates in the United States. We aimed to understand and document the occupational safety and health hazards faced by a particularly at-risk Latino immigrant workforce--cedar block cutters, or bloqueros--on the Olympic Peninsula. Key informant interviews were conducted using community-based participatory methods. Qualitative analysis was guided by grounded theory and a social ecological framework. Thirteen interviews were conducted lasting 1-2 hr each. Three prominent findings arose: (1) bloqueros face occupational risks similar to those found in other forestry occupations, (2) bloqueros face unexpected risks that are likely unique to block cutting, and (3) bloqueros face four overlapping marginalization forces (societal, economical, political, and occupational) that undermine workplace health and safety. Bloqueros work low-paying, high-risk jobs with little health and safety regulation, documentation, or coverage. Workers' precarious socio-economic position and various structural factors compound workplace risks and contribute to a lack of ability to advocate for safer and healthier working conditions. Copyright © 2011 Wiley-Liss, Inc.
Hospital financial performance in the recent recession and implications for institutions that remain financially weak.

PubMed

Bazzoli, Gloria J; Fareed, Naleef; Waters, Teresa M

2014-05-01

The recent recession had a profound effect on all sectors of the US economy, including health care. We examined how private hospitals fared through the recession and considered how changes in their financial health may affect their ability to respond to future industry challenges. We categorized 2,971 private short-term general medical or surgical hospitals (both nonprofit and for-profit) according to their pre-recession financial health and safety-net status, and we examined their operational status changes and operating and total financial margins during 2006-11. We found that hospitals that were financially weak before the recession remained so during and after the recession. The total margins of nonprofit hospitals (both safety-net and other institutions) declined in 2008 but returned to their pre-recession levels by 2011. The recession did not create additional fiscal pressure on hospitals that were previously financially weak or in safety-net roles. However, both groups continue to have notable financial deficiencies that could limit their abilities to meet the growing demands on the industry.
Review of performance, medical, and operational data on pilot aging issues

NASA Technical Reports Server (NTRS)

Stoklosa, J. H.

1992-01-01

An extensive review of the literature and studies relating to performance, medical, operational, and legal data regarding pilot aging issues was performed in order to determine what evidence there is, if any, to support mandatory pilot retirement. Popular misconceptions about aging, including the failure to distinguish between the normal aging process and disease processes that occur more frequently in older individuals, continue to contribute to much of the misunderstanding and controversy that surround this issue. Results: Review of medical data related to the pilot aging issue indicate that recent improvement in medical diagnostics and treatment technology have made it possible to identify to a high degree individuals who are at risk for developing sudden incapacitating illness and for treating those with disqualifying medical conditions. Performance studies revealed that after controlling for the presence of disease states, older pilots are able to perform as well as younger pilots on many performance tasks. Review of accident data showed that older, healthy pilots do not have higher accident rates than younger pilots, and indeeed, evidence suggests that older pilots have an advantage in the cockpit due to higher experience levels. The Man-Machine-Mission-Environment interface of factors can be managed through structured, supervised, and enhanced operations, maintenance, flight reviews, and safety procedures in order to ensure safe and productive operations by reducing the margin of error and by increasing the margin of safety. Conclusions: There is no evidence indicating any specific age as an arbitrary cut-off point for pilots to perform their fight duties. A combination of regular medical screening, performance evaluation, enhanced operational maintenance, and safety procedures can most effectively ensure a safe pilot population than can a mandatory retirement policy based on arbitrary age restrictions.
Plutonium Critical Mass Curve Comparison to Mass at Upper Subcritical Limit (USL) Using Whisper

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alwin, Jennifer Louise; Zhang, Ning

Whisper is computational software designed to assist the nuclear criticality safety analyst with validation studies with the MCNP ® Monte Carlo radiation transport package. Standard approaches to validation rely on the selection of benchmarks based upon expert judgment. Whisper uses sensitivity/uncertainty (S/U) methods to select relevant benchmarks to a particular application or set of applications being analyzed. Using these benchmarks, Whisper computes a calculational margin. Whisper attempts to quantify the margin of subcriticality (MOS) from errors in software and uncertainties in nuclear data. The combination of the Whisper-derived calculational margin and MOS comprise the baseline upper subcritical limit (USL), tomore » which an additional margin may be applied by the nuclear criticality safety analyst as appropriate to ensure subcriticality. A series of critical mass curves for plutonium, similar to those found in Figure 31 of LA-10860-MS, have been generated using MCNP6.1.1 and the iterative parameter study software, WORM_Solver. The baseline USL for each of the data points of the curves was then computed using Whisper 1.1. The USL was then used to determine the equivalent mass for plutonium metal-water system. ANSI/ANS-8.1 states that it is acceptable to use handbook data, such as the data directly from the LA-10860-MS, as it is already considered validated (Section 4.3 4) “Use of subcritical limit data provided in ANSI/ANS standards or accepted reference publications does not require further validation.”). This paper attempts to take a novel approach to visualize traditional critical mass curves and allows comparison with the amount of mass for which the k eff is equal to the USL (calculational margin + margin of subcriticality). However, the intent is to plot the critical mass data along with USL, not to suggest that already accepted handbook data should have new and more rigorous requirements for validation.« less
Differential Impact of Close Surgical Margin on Local Recurrence According to Primary Tumor Size in Oral Squamous Cell Carcinoma.

PubMed

Jang, Jeon Yeob; Choi, Nayeon; Ko, Young-Hyeh; Chung, Man Ki; Son, Young-Ik; Baek, Chung-Hwan; Baek, Kwan-Hyuck; Jeong, Han-Sin

2017-06-01

The extent of surgical safety margin (gross tumor border to resection margin) in oral cancer surgery remains unclear, and no study has determined the differential impact of close surgical margin and microscopic extension according to primary tumor size in oral cancers. We retrospectively analyzed the clinical data of 325 patients with surgically treated oral cavity squamous cell carcinomas to determine the effect of a close surgical margin (<5 mm) (cSM 5 ) on local recurrence. In addition, the depth of microscopic tumor infiltration was determined in 90 available surgical specimens. The cSM 5 was not related to the risk of local tumor recurrence in early-stage oral cancer, while it significantly increased the rate of local tumor recurrence in resectable advanced-stage oral cancers (hazard ratio 3.157, 95 % confidence interval 1.050-9.407, p = 0.041). Addition of postoperative adjuvant radiation to early-stage tumors with cSM 5 did not further reduce the local recurrence rate compared to surgery alone. The depth of microscopic tumor extension from the gross tumor border was significantly associated with primary tumor thickness (ρ = 0.390, p < 0.001) and tumor sizes (ρ = 0.308, p = 0.003), which was a median (range) of 0.84 (0.14-2.32) mm in T1, 1.06 (0.20-4.34) mm in T2, and 1.77 (0.13-4.70) mm in T3-4. The cSM 5 was a significant risk factor for local recurrence only in advanced oral cancers, but not in early-stage tumors, where microscopic tumor extension was not beyond 3 mm in T1 tumors. Thus, the extent of surgical safety margin can be redefined according to the primary tumor size.
44 CFR 60.22 - Planning considerations for flood-prone areas.

Code of Federal Regulations, 2012 CFR

2012-10-01

... community shall consider— (1) Preservation of the flood-prone areas for open space purposes; (2) Relocation... debris, to provide an added margin of safety against floods having a magnitude greater than the base...
44 CFR 60.22 - Planning considerations for flood-prone areas.

Code of Federal Regulations, 2013 CFR

2013-10-01

... community shall consider— (1) Preservation of the flood-prone areas for open space purposes; (2) Relocation... debris, to provide an added margin of safety against floods having a magnitude greater than the base...
44 CFR 60.22 - Planning considerations for flood-prone areas.

Code of Federal Regulations, 2014 CFR

2014-10-01

... community shall consider— (1) Preservation of the flood-prone areas for open space purposes; (2) Relocation... debris, to provide an added margin of safety against floods having a magnitude greater than the base...
Accident tolerant fuel cladding development: Promise, status, and challenges

NASA Astrophysics Data System (ADS)

Terrani, Kurt A.

2018-04-01

The motivation for transitioning away from zirconium-based fuel cladding in light water reactors to significantly more oxidation-resistant materials, thereby enhancing safety margins during severe accidents, is laid out. A review of the development status for three accident tolerant fuel cladding technologies, namely coated zirconium-based cladding, ferritic alumina-forming alloy cladding, and silicon carbide fiber-reinforced silicon carbide matrix composite cladding, is offered. Technical challenges and data gaps for each of these cladding technologies are highlighted. Full development towards commercial deployment of these technologies is identified as a high priority for the nuclear industry.
Assessment of the stability of a multimachine power system by the transient energy margin

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stanton, S.E.

1982-01-01

This reasearch develops a tool for the direct assessment of the transient stability of a multimachine electric power system that is subject to a large disturbance. The tool is the Transient Energy Margin. The transient of interest is the first swing (or inertial) transient. The Transient Energy Margin is computed by evaluating an energy function using the relevant unstable equilibrium point and the system states at the instant the disturbance is removed. In evaluating the function, a significant portion of the fault kinetic energy is identified as not contributing to system instability. The resulting energy value is a measure ofmore » the margin-of-safety for the disturbed system. A distinction is proposed between assessing system stability and assessing system security. The Transient Energy Margin is used first to assess the stability of the system. This profile ranks various distrubances to display the strengths and weaknesses of the system. A modified Transient Energy Margin is then proposed as an assessment of security; the transient energy margin profile is repeated to evaluate the system response in terms of the local minimum energy conditions approached by the critical trajectories. Both techniques are applied to a practical, 17 generator test system.« less
Comparing vaccines: a systematic review of the use of the non-inferiority margin in vaccine trials.

PubMed

Donken, R; de Melker, H E; Rots, N Y; Berbers, G; Knol, M J

2015-03-17

Non-inferiority (NI) randomized controlled trials (RCTs) aim to demonstrate that a new treatment is no worse than a comparator that has already shown its efficacy over placebo within a pre-specified margin. However, clear guidelines on how the NI margin should be determined are lacking for vaccine trials. A difference (seroprevalence/risk) of 10% or a geometric mean titre/concentration (GMT) ratio of 1.5 or 2.0 in antibody levels is implicitly recommended for vaccine trials. We aimed to explore which NI margins were used in vaccine RCTs and how they were determined. A systematic search for NI vaccine RCTs yielded 177 eligible articles. Data were extracted from these articles using a standardized form and included general characteristics and characteristics specific for NI trials. Relations between the study characteristics and the NI margin used were explored. Among the 143 studies using an NI margin based on difference (n=136 on immunogenicity, n=2 on efficacy and n=5 on safety), 66% used a margin of 10%, 23% used margins lower than 10% (range 1-7.5%) and 11% used margins larger than 10% (range 11.5-25%). Of the 103 studies using a NI margin based on the GMT ratio, 50% used a margin of 0.67/1.5 and 49% used 0.5/2.0. As observed, 85% of the studies did not discuss the method of margin determination; and 19% of the studies lacked a confidence interval or p-value for non-inferiority. Most NI vaccine RCTs used an NI margin of 10% for difference or a GMT ratio of 1.5 or 2.0 without a clear rationale. Most articles presented enough information for the reader to make a judgement about the NI margin used and the conclusions. The reporting on the design, margins used and results of NI vaccine trials could be improved; more explicit guidelines may help to achieve this end. Copyright © 2015 Elsevier Ltd. All rights reserved.
SU-E-T-573: The Robustness of a Combined Margin Recipe for Uncertainties During Radiotherapy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroom, J; Vieira, S; Greco, C

2014-06-01

Purpose: To investigate the variability of a safety margin recipe that combines CTV and PTV margins quadratically, with several tumor, treatment, and user related factors. Methods: Margin recipes were calculated by monte-carlo simulations in 5 steps. 1. A spherical tumor with or without isotropic microscopic was irradiated with a 5 field dose plan2. PTV: Geometric uncertainties were introduced using systematic (Sgeo) and random (sgeo) standard deviations. CTV: Microscopic disease distribution was modelled by semi-gaussian (Smicro) with varying number of islets (Ni)3. For a specific uncertainty set (Sgeo, sgeo, Smicro(Ni)), margins were varied until pre-defined decrease in TCP or dose coveragemore » was fulfilled. 4. First, margin recipes were calculated for each of the three uncertainties separately. CTV and PTV recipes were then combined quadratically to yield a final recipe M(Sgeo, sgeo, Smicro(Ni)).5. The final M was verified by simultaneous simulations of the uncertainties.Now, M has been calculated for various changing parameters like margin criteria, penumbra steepness, islet radio-sensitivity, dose conformity, and number of fractions. We subsequently investigated A: whether the combined recipe still holds in all these situations, and B: what the margin variation was in all these cases. Results: We found that the accuracy of the combined margin recipes remains on average within 1mm for all situations, confirming the correctness of the quadratic addition. Depending on the specific parameter, margin factors could change such that margins change over 50%. Especially margin recipes based on TCP-criteria are more sensitive to more parameters than those based on purely geometric Dmin-criteria. Interestingly, measures taken to minimize treatment field sizes (by e.g. optimizing dose conformity) are counteracted by the requirement of larger margins to get the same tumor coverage. Conclusion: Margin recipes combining geometric and microscopic uncertainties quadratically are accurate under varying circumstances. However margins can change up to 50% for different situations.« less
Assessment of the Impact of Scheduled Postmarketing Safety Summary Analyses on Regulatory Actions

PubMed Central

Sekine, S; Pinnow, EE; Wu, E; Kurtzig, R; Hall, M; Dal Pan, GJ

2016-01-01

In addition to standard postmarketing drug safety monitoring, Section 915 of the Food and Drug Administration Amendments Act of 2007 (FDAAA) requires the US Food and Drug Administration (FDA) to conduct a summary analysis of adverse event reports to identify risks of a drug or biologic product 18 months after product approval, or after 10,000 patients have used the product, whichever is later. We assessed the extent to which these analyses identified new safety signals and resultant safety-related label changes. Among 458 newly approved products, 300 were the subjects of a scheduled analysis; a new safety signal that resulted in a safety-related label change was found for 11 of these products. Less than 2% of 713 safety-related label changes were based on the scheduled analyses. Our study suggests that the safety summary analyses provide only marginal value over other pharmacovigilance activities. PMID:26853718
Flight-determined stability analysis of multiple-input-multiple-output control systems

NASA Technical Reports Server (NTRS)

Burken, John J.

1992-01-01

Singular value analysis can give conservative stability margin results. Applying structure to the uncertainty can reduce this conservatism. This paper presents flight-determined stability margins for the X-29A lateral-directional, multiloop control system. These margins are compared with the predicted unscaled singular values and scaled structured singular values. The algorithm was further evaluated with flight data by changing the roll-rate-to-aileron command-feedback gain by +/- 20 percent. Minimum eigenvalues of the return difference matrix which bound the singular values are also presented. Extracting multiloop singular values from flight data and analyzing the feedback gain variations validates this technique as a measure of robustness. This analysis can be used for near-real-time flight monitoring and safety testing.
Flight-determined stability analysis of multiple-input-multiple-output control systems

NASA Technical Reports Server (NTRS)

Burken, John J.

1992-01-01

Singular value analysis can give conservative stability margin results. Applying structure to the uncertainty can reduce this conservatism. This paper presents flight-determined stability margins for the X-29A lateral-directional, multiloop control system. These margins are compared with the predicted unscaled singular values and scaled structured singular values. The algorithm was further evaluated with flight data by changing the roll-rate-to-aileron-command-feedback gain by +/- 20 percent. Also presented are the minimum eigenvalues of the return difference matrix which bound the singular values. Extracting multiloop singular values from flight data and analyzing the feedback gain variations validates this technique as a measure of robustness. This analysis can be used for near-real-time flight monitoring and safety testing.

Correlative Microscopy of Neutron-Irradiated Materials

DOE PAGES

Briggs, Samuel A.; Sridharan, Kumar; Field, Kevin G.

2016-12-31

A nuclear reactor core is a highly demanding environment that presents several unique challenges for materials performance. Materials in modern light water reactor (LWR) cores must survive several decades in high-temperature (300-350°C) aqueous corrosion conditions while being subject to large amounts of high-energy neutron irradiation. Next-generation reactor designs seek to use more corrosive coolants (e.g., molten salts) and even greater temperatures and neutron doses. The high amounts of disorder and unique crystallographic defects and microchemical segregation effects induced by radiation inevitably lead to property degradation of materials. Thus, maintaining structural integrity and safety margins over the course of the reactor'smore » service life thus necessitates the ability to understand and predict these degradation phenomena in order to develop new, radiation-tolerant materials that can maintain the required performance in these extreme conditions.« less
Adjuvant treatment in patients at high risk of recurrence of thymoma: efficacy and safety of a three-dimensional conformal radiation therapy regimen.

PubMed

Perri, Francesco; Pisconti, Salvatore; Conson, Manuel; Pacelli, Roberto; Della Vittoria Scarpati, Giuseppina; Gnoni, Antonio; D'Aniello, Carmine; Cavaliere, Carla; Licchetta, Antonella; Cella, Laura; Giuliano, Mario; Schiavone, Concetta; Falivene, Sara; Di Lorenzo, Giuseppe; Buonerba, Carlo; Ravo, Vincenzo; Muto, Paolo

2015-01-01

The clinical benefits of postoperative radiation therapy (PORT) for patients with thymoma are still controversial. In the absence of defined guidelines, prognostic factors such as stage, status of surgical margins, and histology are often considered to guide the choice of adjuvant treatment (radiotherapy and/or chemotherapy). In this study, we describe our single-institution experience of three-dimensional conformal PORT administered as adjuvant treatment to patients with thymoma. Twenty-two consecutive thymoma patients (eleven male and eleven female) with a median age of 52 years and treated at our institution by PORT were analyzed. The patients were considered at high risk of recurrence, having at least one of the following features: stage IIB or III, involved resection margins, or thymic carcinoma histology. Three-dimensional conformal PORT with a median total dose on clinical target volume of 50 (range 44-60) Gy was delivered to the tumor bed by 6-20 MV X-ray of the linear accelerator. Follow-up after radiotherapy was done by computed tomography scan every 6 months for 2 years and yearly thereafter. Two of the 22 patients developed local recurrence and four developed distant metastases. Median overall survival was 100 months, and the 3-year and 5-year survival rates were 83% and 74%, respectively. Median disease-free survival was 90 months, and the 5-year recurrence rate was 32%. On univariate analysis, pathologic stage III and presence of positive surgical margins had a significant impact on patient prognosis. Radiation toxicity was mild in most patients and no severe toxicity was registered. Adjuvant radiotherapy achieved good local control and showed an acceptable toxicity profile in patients with high-risk thymoma.
The influence of novel compliant floors on balance control in elderly women--A biomechanical study.

PubMed

Wright, Alexander D; Laing, Andrew C

2011-07-01

Novel compliant floors aim to decrease the risk for fall-related injury by providing substantial force attenuation during the impact phase of falls. Certain models of compliant flooring have been shown to have limited influence on postural sway and successful completion of dynamic balance tasks. However, the effects of these products on balance recovery mechanisms following an externally induced perturbation have yet to be quantified. We used a floor translation paradigm to induce a balance perturbation to thirteen elderly community-dwelling women. Outcome measures included the displacement rates and margins of safety for both the underfoot centre-of-pressure and whole-body centre-of-mass across two novel compliant floors (SmartCell, SofTile), two basic foam surfaces (Firm-Foam, Soft-Foam) and a standard 'Rigid' floor as a control condition. The centre-of-mass and centre-of-pressure margins of safety, and all centre-of-mass displacement rates, were not significantly lower for the two novel compliant flooring systems compared to the control floor. The centre-of-pressure displacement rates were similar to the control floor for the SmartCell floor condition. The majority of the margin of safety and displacement rate variables for the foam floors were significantly lower than the control condition. This study illustrates that the SmartCell and SofTile novel compliant floors have minimal influences on balance and balance control responses following externally induced perturbations in older community-dwelling women, and supports pilot installations of these floors to inform decisions regarding the development of clinical trials. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.
The influence of novel compliant floors on balance control in elderly women—A biomechanical study

PubMed Central

Wright, Alexander D.; Laing, Andrew C.

2012-01-01

Novel compliant floors aim to decrease the risk for fall-related injury by providing substantial force attenuation during the impact phase of falls. Certain models of compliant flooring have been shown to have limited influence on postural sway and successful completion of dynamic balance tasks. However, the effects of these products on balance recovery mechanisms following an externally induced perturbation have yet to be quantified. We used a floor translation paradigm to induce a balance perturbation to thirteen elderly community-dwelling women. Outcome measures included the displacement rates and margins of safety for both the underfoot centre-of-pressure and whole-body centre-of-mass across two novel compliant floors (Smart-Cell, SofTile), two basic foam surfaces (Firm-Foam, Soft-Foam) and a standard ‘Rigid’ floor as a control condition. The centre-of-mass and centre-of-pressure margins of safety, and all centre-of-mass displacement rates, were not significantly lower for the two novel compliant flooring systems compared to the control floor. The centre-of-pressure displacement rates were similar to the control floor for the SmartCell floor condition. The majority of the margin of safety and displacement rate variables for the foam floors were significantly lower than the control condition. This study illustrates that the SmartCell and SofTile novel compliant floors have minimal influences on balance and balance control responses following externally induced perturbations in older community-dwelling women, and supports pilot installations of these floors to inform decisions regarding the development of clinical trials. PMID:21545881
Hydraulic safety margins and embolism reversal in stems and leaves: why are conifers and angiosperms so different?

PubMed

Johnson, Daniel M; McCulloh, Katherine A; Woodruff, David R; Meinzer, Frederick C

2012-10-01

Angiosperm and coniferous tree species utilize a continuum of hydraulic strategies. Hydraulic safety margins (defined as differences between naturally occurring xylem pressures and pressures that would cause hydraulic dysfunction, or differences between pressures resulting in loss of hydraulic function in adjacent organs (e.g., stems vs. leaves) tend to be much greater in conifers than angiosperms and serve to prevent stem embolism. However, conifers tend to experience embolism more frequently in leaves and roots than angiosperms. Embolism repair is thought to occur by active transport of sugars into empty conduits followed by passive water movement. The most likely source of sugar for refilling is from nonstructural carbohydrate depolymerization in nearby parenchyma cells. Compared to angiosperms, conifers tend to have little parenchyma or nonstructural carbohydrates in their wood. The ability to rapidly repair embolisms may rely on having nearby parenchyma cells, which could explain the need for greater safety margins in conifer wood as compared to angiosperms. The frequent embolisms that occur in the distal portions of conifers are readily repaired, perhaps due to the abundant parenchyma in leaves and roots, and these distal tissues may act as hydraulic circuit breakers that prevent tension-induced embolisms in the attached stems. Frequent embolisms in conifer leaves may also be due to weaker stomatal response to changes in ambient humidity. Although there is a continuum of hydraulic strategies among woody plants, there appear to be two distinct 'behaviors' at the extremes: (1) embolism prevention and (2) embolism occurrence and subsequent repair. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.
Lateral spread of heat during thyroidectomy using different haemostatic devices.

PubMed

Adamczewski, Zbigniew; Król, Aleksander; Kałużna-Markowska, Karolina; Brzeziński, Jan; Lewiński, Andrzej; Dedecjus, Marek

2015-01-01

The presented study is an attempt to comprehensively analyze the lateral spread of heat during thyroidectomy. Obtained results may be valuable in other surgical disciplines in which thermal analysis is difficult or impossible. The aim of the study was to evaluate the temperature distribution in the operating field during thyroidectomy performed with the use of modern haemostatic instruments, and to define the safety margin for the investigated devices. Ninety-three patients were thyroidectomised due to thyroid neoplasm. During all the operations the thermovisual measurements were carried out along with continuous intraoperative neuromonitoring of the recurrent laryngeal nerve (CIONM). Investigated patients were divided into 5 groups, named according to the applied haemostatic technique: LigaSure (N=17); ThermoStapler (N=20); Focus (N=19); SonoSurg (N=17) and Monopolar (N=20). At maximal performance settings, the highest working temperature was observed for the ThermoStapler, while the lowest temperature was recorded for the Monopolar. Safety margin and working time were increased in Focus and SonoSurg, compared to LigaSure and ThermoStapler. The differences in the necrosis thickness were negligible. The largest distance of the midline of the active blade from isotherm of 42ºC observed in the study was 5.51 mm; none of investigated devices used at a bigger distance had influence on the morphology of the electric signal of CIONM. The thermo-visual camera allows non-invasive, safe, and real-time monitoring and analysis of temperature distribution in the operation area during thyroidectomy. Proposed minimal safety margin for the analysed devices is 5.51 mm.
RISMC Toolkit and Methodology Research and Development Plan for External Hazards Analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Justin Leigh

This report includes the description and development plan for a Risk Informed Safety Margins Characterization (RISMC) toolkit and methodology that will evaluate multihazard risk in an integrated manner to support the operating nuclear fleet.
Avionic Architecture for Model Predictive Control Application in Mars Sample & Return Rendezvous Scenario

NASA Astrophysics Data System (ADS)

Saponara, M.; Tramutola, A.; Creten, P.; Hardy, J.; Philippe, C.

2013-08-01

Optimization-based control techniques such as Model Predictive Control (MPC) are considered extremely attractive for space rendezvous, proximity operations and capture applications that require high level of autonomy, optimal path planning and dynamic safety margins. Such control techniques require high-performance computational needs for solving large optimization problems. The development and implementation in a flight representative avionic architecture of a MPC based Guidance, Navigation and Control system has been investigated in the ESA R&T study “On-line Reconfiguration Control System and Avionics Architecture” (ORCSAT) of the Aurora programme. The paper presents the baseline HW and SW avionic architectures, and verification test results obtained with a customised RASTA spacecraft avionics development platform from Aeroflex Gaisler.
Sediment movement and dispersal patterns on the Grand Banks continental shelf and slope were tied to the dynamics of the Laurentide ice-sheet margin

NASA Astrophysics Data System (ADS)

Rashid, H.; MacKillop, K.; Piper, D.; Vermooten, M.; Higgins, J.; Marche, B.; Langer, K.; Brockway, B.; Spicer, H. E.; Webb, M. D.; Fournier, E.

2015-12-01

The expansion and contraction of the late Pleistocene Laurentide ice-sheet (LIS) was the crucial determining factor for the geomorphic features and shelf and slope sediment mobility on the eastern Canadian continental margin, with abundant mass-transport deposits (MTDs) seaward of ice margins on the upper slope. Here, we report for the first time sediment failure and mass-transport deposits from the central Grand Banks slope in the Salar and Carson petroleum basins. High-resolution seismic profiles and multibeam bathymetry show numerous sediment failure scarps in 500-1600 m water depth. There is no evidence for an ice margin on the upper slope younger than MIS 6. Centimeter-scale X-ray fluorescence analysis (XRF), grain size, and oxygen isotope data from piston cores constrain sediment processes over the past 46 ka. Geotechnical measurements including Atterberg limit tests, vane shear measurements and triaxial and multi-stage isotropic consolidation tests allowed us to assess the instability on the continental margin. Cores with continuous undisturbed stratigraphy in contourite silty muds show normal downcore increase in bulk density and undrained peak shear strength. Heinrich (H) layers are identifiable by a marked increase in the bulk density, high Ca (ppm), increase in iceberg-rafted debris and lighter δ18O in the polar planktonic foram Neogloboquadrina pachyderma (sinistral): with a few C-14 dates they provide a robust chronology. There is no evidence for significant supply of sediment from the Grand Banks at the last-glacial maximum. Mass-transport deposits (MTD) are marked by variability in the bulk density, undrained shear strength and little variation in bulk density or Ca (ppm) values. The MTD are older than 46 ka on the central Grand Banks slope, whereas younger MTDs are present in southern Flemish Pass. Factor of safety calculations suggest the slope is statically stable up to gradients of 10°, but more intervals of silty mud may fail during earthquake-induced cyclic loading based on Atterberg tests. By analogy with the Holocene, contourites deposited in MIS 5e may be particularly silty and form a "weak layer" susceptible to failure.
Organizational pressures and mitigating strategies in small commercial aviation: findings from Alaska.

PubMed

Bearman, Chris; Paletz, Susannah B F; Orasanu, Judith; Brooks, Benjamin P

2009-12-01

Recent attention has focused on the way in which organizational factors can erode safety in aviation, particularly in regions that have a high accident rate, such as Alaska. The present study builds on this work by examining the direct and indirect pressures that can be exerted on pilots by Alaskan operators. In addition, the paper examines ways in which organizations and individuals manage the effects of pressure. Using the critical incident method to uncover situations where the pilot's skills had been challenged, 28 pilots who flew in Alaska were interviewed. A bottom-up qualitative analysis revealed a range of organizational pressures and mitigating strategies. Pilots in Alaska encountered both implicit and explicit norms and expectations to fly in marginal conditions. Pressure also arose from pilots' awareness of the need for their company to make money and from perceived job competition. Some Alaskan operators were able to mitigate the effects of pressure on their pilots and some pilots reported mitigating pressure to fly by managing their employer's expectations and re-emphasizing safety. Organizational factors were found to be an important source of pressure for pilots and are likely to contribute to the high accident rate in Alaska. Balancing the competing demands of safety and productivity may be extremely difficult for many small operators, which places a heavy reliance on the decision making of individuals. Both the subtle pressures on individual pilots and strategies for mitigating those pressures are, therefore, extremely important to safety and productivity in small-scale commercial aviation.
Three-dimensional brain MRI for DBS patients within ultra-low radiofrequency power limits.

PubMed

Sarkar, Subhendra N; Papavassiliou, Efstathios; Hackney, David B; Alsop, David C; Shih, Ludy C; Madhuranthakam, Ananth J; Busse, Reed F; La Ruche, Susan; Bhadelia, Rafeeque A

2014-04-01

For patients with deep brain stimulators (DBS), local absorbed radiofrequency (RF) power is unknown and is much higher than what the system estimates. We developed a comprehensive, high-quality brain magnetic resonance imaging (MRI) protocol for DBS patients utilizing three-dimensional (3D) magnetic resonance sequences at very low RF power. Six patients with DBS were imaged (10 sessions) using a transmit/receive head coil at 1.5 Tesla with modified 3D sequences within ultra-low specific absorption rate (SAR) limits (0.1 W/kg) using T2 , fast fluid-attenuated inversion recovery (FLAIR) and T1 -weighted image contrast. Tissue signal and tissue contrast from the low-SAR images were subjectively and objectively compared with routine clinical images of six age-matched controls. Low-SAR images of DBS patients demonstrated tissue contrast comparable to high-SAR images and were of diagnostic quality except for slightly reduced signal. Although preliminary, we demonstrated diagnostic quality brain MRI with optimized, volumetric sequences in DBS patients within very conservative RF safety guidelines offering a greater safety margin. © 2014 International Parkinson and Movement Disorder Society.
An assessment of the genotoxicity and human health risk of topical use of kojic acid [5-hydroxy-2-(hydroxymethyl)-4H-pyran-4-one].

PubMed

Nohynek, Gerhard J; Kirkland, David; Marzin, Daniel; Toutain, Herve; Leclerc-Ribaud, Christele; Jinnai, Hiroyuki

2004-01-01

Kojic acid (KA), a natural substance produced by fungi or bacteria, such as Aspergillus, Penicillium or Acetobacter spp, is contained in traditional Japanese fermented foods and is used as a dermatological skin-lightening agent. High concentrations of KA (>or=1000 microg/plate) were mutagenic in S. typhimurium strains TA 98, TA 100, TA 1535, TA102 and E. coli WP2uvrA, but not in TA 1537. An Ames test following the "treat and plate" protocol was negative. A chromosome aberration test in V79 cells following a robust protocol showed only a marginal increase in chromosome aberrations at cytotoxic concentrations after prolonged (>or=18 h) exposure. No genotoxic activity was observed for hprt mutations either in mouse lymphoma or V79 cells, or in in vitro micronucleus tests in human keratinocytes or hepatocytes. All in vivo genotoxicity studies on KA doses were negative, including mouse bone marrow micronucleus tests after single or multiple doses, an in vivo/in vitro unscheduled DNA synthesis (UDS) test, or a study in the liver of the transgenic Muta(TM) Mouse. On the basis of pharmacokinetic studies in rats and in vitro absorption studies in human skin, the systemic exposure of KA in man following its topical application is estimated to be in the range of 0.03-0.06 mg/kg/day. Comparing these values with the NOAEL in oral subchronic animal studies (250 mg/kg/day), the calculated margin of safety would be 4200- to 8900-fold. Comparing human exposure with the doses that were negative for micronuclei, UDS and gene mutations in vivo, the margins of safety are 16000 to 26000-fold. In conclusion, the topical use of KA as a skin lightening agent results in minimal exposure that poses no or negligible risk of genotoxicity or toxicity to the consumer.
Marginal Hospital Cost of Surgery-related Hospital-acquired Pressure Ulcers.

PubMed

Spector, William D; Limcangco, Rhona; Owens, Pamela L; Steiner, Claudia A

2016-09-01

Patients who develop hospital-acquired pressure ulcers (HAPUs) are more likely to die, have longer hospital stays, and are at greater risk of infections. Patients undergoing surgery are prone to developing pressure ulcers (PUs). To estimate the hospital marginal cost of a HAPU for adults patients who were hospitalized for major surgeries, adjusted for patient characteristics, comorbidities, procedures, and hospital characteristics. Data are from the Healthcare Cost and Utilization Project (HCUP) State Inpatient Databases and the Medicare Patient Safety Monitoring System for 2011 and 2012. PU information was obtained using retrospective structured record review from trained MPMS data abstractors. Costs are derived using HCUP hospital-specific cost-to-charge ratios. Marginal cost estimates were made using Extended Estimating Equations. We estimated the marginal cost at the 25th, 50th, and 75th percentiles of the cost distribution using Simultaneous Quantile Regression. We find that 3.5% of major surgical patients developed HAPUs and that the HAPUs added ∼$8200 to the cost of a surgical stay after adjusting for comorbidities, patient characteristics, procedures, and hospital characteristics. This is an ∼44% addition to the cost of a major surgical stay but less than half of the unadjusted cost difference. In addition, we find that for high-cost stays (75th percentile) HAPUs added ∼$12,100, whereas for low-cost stays (25th percentile) HAPUs added ∼$3900. This paper suggests that HAPUs add ∼44% to the cost of major surgical hospital stays, but the amount varies depending on the total cost of the visit.
Change detection in urban and rural driving scenes: Effects of target type and safety relevance on change blindness.

PubMed

Beanland, Vanessa; Filtness, Ashleigh J; Jeans, Rhiannon

2017-03-01

The ability to detect changes is crucial for safe driving. Previous research has demonstrated that drivers often experience change blindness, which refers to failed or delayed change detection. The current study explored how susceptibility to change blindness varies as a function of the driving environment, type of object changed, and safety relevance of the change. Twenty-six fully-licenced drivers completed a driving-related change detection task. Changes occurred to seven target objects (road signs, cars, motorcycles, traffic lights, pedestrians, animals, or roadside trees) across two environments (urban or rural). The contextual safety relevance of the change was systematically manipulated within each object category, ranging from high safety relevance (i.e., requiring a response by the driver) to low safety relevance (i.e., requiring no response). When viewing rural scenes, compared with urban scenes, participants were significantly faster and more accurate at detecting changes, and were less susceptible to "looked-but-failed-to-see" errors. Interestingly, safety relevance of the change differentially affected performance in urban and rural environments. In urban scenes, participants were more efficient at detecting changes with higher safety relevance, whereas in rural scenes the effect of safety relevance has marginal to no effect on change detection. Finally, even after accounting for safety relevance, change blindness varied significantly between target types. Overall the results suggest that drivers are less susceptible to change blindness for objects that are likely to change or move (e.g., traffic lights vs. road signs), and for moving objects that pose greater danger (e.g., wild animals vs. pedestrians). Copyright © 2017 Elsevier Ltd. All rights reserved.
Using translational medicine to understand clinical differences between botulinum toxin formulations.

PubMed

Aoki, K R; Ranoux, D; Wissel, J

2006-12-01

When using botulinum toxin-based products, the physician must decide the optimal location and dose required to alleviate symptoms and improve the patient's quality of life. To deliver effective treatment, the physician needs to understand the importance of accurate target muscle selection and localization and the implications of each product's migration properties when diluted in different volumes. Pre-clinical mouse models of efficacy and safety have been utilized to compare local and distal muscle relaxation effects following defined intramuscular administration. Data from the model allow the products to be ranked based on their propensity for local efficacy versus their distal migration properties. Using standardized dilutions, the non-parallel dose-response curves for the various formulations demonstrate that they have different efficacy profiles. Distal effects were also noted at different treatment doses, which are reflected in the different safety and/or therapeutic margins. Based on these pre-clinical data, the safety and therapeutic margin rankings are ordered, largest to smallest, as BOTOX, Dysport and Myobloc. The results of subsequent clinical trials are variable and dose comparisons are inconclusive, thus supporting the regulatory position that the dose units of the individual preparations are unique and cannot be simply converted between products.
Tumor response and negative distal resection margins of rectal cancer after hyperthermochemoradiation therapy.

PubMed

Tsutsumi, Soichi; Tabe, Yuichi; Fujii, Takaaki; Yamaguchi, Satoru; Suto, Toshinaga; Yajima, Reina; Morita, Hiroki; Kato, Toshihide; Shioya, Mariko; Saito, Jun-Ichi; Asao, Takayuki; Nakano, Takashi; Kuwano, Hiroyuki

2011-11-01

The safety of regional hyperthermia has been tested in locally advanced rectal cancer. The aim of this study was to assess the effects of shorter distal margins on local control and survival in rectal cancer patients who were treated with preoperative hyperthermochemoradiation therapy (HCRT) and underwent rectal resection by using the total mesorectal excision (TME) method. Ninety-three patients with rectal adenocarcinoma who received neoadjuvant HCRT (total radiation: 50 Gy) were included in this study. Surgery was performed 8 weeks after HCRT, and each resected specimen was evaluated histologically. Length of distal surgical margins, status of circumferential margins, pathological response, and tumor node metastasis stage were examined for their effects on recurrence and survival. Fifty-eight (62.4%) patients had tumor regression, and 20 (21.5%) had a pathological complete response. Distal margin length ranged from 1 to 55 mm (median, 21 mm) and did not correlate with local recurrence (p=0.57) or survival (p=0.75) by univariate analysis. Kaplan-Meier estimates of recurrence-free survival and local recurrence for the <10 mm versus ≥10 mm groups were not significantly different. Positive circumferential margins and failure of tumors to respond were unfavorable factors in survival. Distal resection margins that are shorter than 10 mm but are not positive appear to be equivalent to longer margins in patients who undergo HCRT followed by rectal resection with TME. To improve the down-staging rate, additional studies are needed.
Safety and Suitability for Service Assessment Testing for Surface and Underwater Launched Munitions

DTIC Science & Technology

2014-12-05

test efficiency that tend to associate the Analytical S3 Test Approach with large, complex munition systems and the Empirical S3 Test Approach with...the smaller, less complex munition systems . 8.1 ANALYTICAL S3 TEST APPROACH. The Analytical S3 test approach, as shown in Figure 3, evaluates...assets than the Analytical S3 Test approach to establish the safety margin of the system . This approach is generally applicable to small munitions
10 CFR 72.122 - Overall requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... natural phenomena. (1) Structures, systems, and components important to safety must be designed to... effects of natural phenomena such as earthquakes, tornadoes, lightning, hurricanes, floods, tsunami, and... severe of the natural phenomena reported for the site and surrounding area, with appropriate margins to...
14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...
14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

Multiphysics Object-Oriented Simulation Environment (MOOSE)

ScienceCinema

None

2017-12-09

Nuclear reactor operators can expand safety margins with more precise information about how materials behave inside operating reactors. INL's new simulation platform makes such studies easier & more informative by letting researchers "plug-n-play" their mathematical models, skipping years of computer code development.
Reliability-based evaluation of bridge components for consistent safety margins.

DOT National Transportation Integrated Search

2010-10-01

The Load and Resistant Factor Design (LRFD) approach is based on the concept of structural reliability. The approach is more : rational than the former design approaches such as Load Factor Design or Allowable Stress Design. The LRFD Specification fo...
Dosimetric consequences of translational and rotational errors in frame-less image-guided radiosurgery

PubMed Central

2012-01-01

Background To investigate geometric and dosimetric accuracy of frame-less image-guided radiosurgery (IG-RS) for brain metastases. Methods and materials Single fraction IG-RS was practiced in 72 patients with 98 brain metastases. Patient positioning and immobilization used either double- (n = 71) or single-layer (n = 27) thermoplastic masks. Pre-treatment set-up errors (n = 98) were evaluated with cone-beam CT (CBCT) based image-guidance (IG) and were corrected in six degrees of freedom without an action level. CBCT imaging after treatment measured intra-fractional errors (n = 64). Pre- and post-treatment errors were simulated in the treatment planning system and target coverage and dose conformity were evaluated. Three scenarios of 0 mm, 1 mm and 2 mm GTV-to-PTV (gross tumor volume, planning target volume) safety margins (SM) were simulated. Results Errors prior to IG were 3.9 mm ± 1.7 mm (3D vector) and the maximum rotational error was 1.7° ± 0.8° on average. The post-treatment 3D error was 0.9 mm ± 0.6 mm. No differences between double- and single-layer masks were observed. Intra-fractional errors were significantly correlated with the total treatment time with 0.7mm±0.5mm and 1.2mm±0.7mm for treatment times ≤23 minutes and >23 minutes (p<0.01), respectively. Simulation of RS without image-guidance reduced target coverage and conformity to 75% ± 19% and 60% ± 25% of planned values. Each 3D set-up error of 1 mm decreased target coverage and dose conformity by 6% and 10% on average, respectively, with a large inter-patient variability. Pre-treatment correction of translations only but not rotations did not affect target coverage and conformity. Post-treatment errors reduced target coverage by >5% in 14% of the patients. A 1 mm safety margin fully compensated intra-fractional patient motion. Conclusions IG-RS with online correction of translational errors achieves high geometric and dosimetric accuracy. Intra-fractional errors decrease target coverage and conformity unless compensated with appropriate safety margins. PMID:22531060
Design and synthesis of novel 1,4-benzodiazepine derivatives and their biological evaluation as cholinesterase inhibitors.

PubMed

Mohamed, Lamia Wagdy; El-Yamany, Mohamed F

2012-08-01

A new series of 1,4-benzodiazepine-2,5-dione structurally related to cyclopenin has been synthesized. The new compounds were assayed in vivo and in vitro for their ability to inhibit acetylcholinesterase enzyme and were found to have potent reversible anticholinesterase activity when tested in vitro for isolated frog rectus abdominis and guinea pig ileum in addition to increasing brain cholinesterase level in rats when percentage inhibition were tested in vivo, moreover compounds 5a, 5b, 5c and 5g were the most active. LD(50) was performed for these derivatives and they displayed high safety margin.
Structural Pain Compensating Flight Control

NASA Technical Reports Server (NTRS)

Miller, Chris J.

2014-01-01

The problem of control command and maneuver induced structural loads is an important aspect of any control system design. Designers must design the aircraft structure and the control architecture to achieve desired piloted control responses while limiting the imparted structural loads. The classical approach is to build the structure with high margins, restrict control surface commands to known good combinations, and train pilots to follow procedural maneuvering limitations. With recent advances in structural sensing and the continued desire to improve safety and vehicle fuel efficiency, it is both possible and desirable to develop control architectures that enable lighter vehicle weights while maintaining and improving protection against structural damage.
Aviation safety and maintenance under major organizational changes, investigating non-existing accidents.

PubMed

Herrera, Ivonne A; Nordskag, Arve O; Myhre, Grete; Halvorsen, Kåre

2009-11-01

The objective of this paper is to discuss the following questions: Do concurrent organizational changes have a direct impact on aviation maintenance and safety, if so, how can this be measured? These questions were part of the investigation carried out by the Accident Investigation Board, Norway (AIBN). The AIBN investigated whether Norwegian aviation safety had been affected due to major organizational changes between 2000 and 2004. The main concern was the reduction in safety margins and its consequences. This paper presents a summary of the techniques used and explains how they were applied in three airlines and by two offshore helicopter operators. The paper also discusses the development of safety related indicators in the aviation industry. In addition, there is a summary of the lessons learned and safety recommendations. The Norwegian Ministry of Transport has required all players in the aviation industry to follow up the findings and recommendations of the AIBN study.
An assessment and validation study of nuclear reactors for low power space applications

NASA Technical Reports Server (NTRS)

Klein, A. C.; Gedeon, S. R.; Morey, D. C.

1987-01-01

The feasibility and safety of six conceptual small, low power nuclear reactor designs was evaluated. Feasibility evaluations included the determination of sufficient reactivity margins for seven years of full power operation and safe shutdown as well as handling during pre-launch assembly phases. Safety evaluations were concerned with the potential for maintaining subcritical conditions in the event of launch or transportation accidents. These included water immersion accident scenarios both with and without water flooding the core. Results show that most of the concepts can potentially meet the feasibility and safety requirements; however, due to the preliminary nature of the designs considered, more detailed designs will be necessary to enable these concepts to fully meet the safety requirements.
Long-term safety and efficacy of stereotactic radiosurgery for vestibular schwannomas: evaluation of 440 patients more than 10 years after treatment with Gamma Knife surgery.

PubMed

Hasegawa, Toshinori; Kida, Yoshihisa; Kato, Takenori; Iizuka, Hiroshi; Kuramitsu, Shunichiro; Yamamoto, Takashi

2013-03-01

Object Little is known about long-term outcomes, including tumor control and adverse radiation effects, in patients harboring vestibular schwannomas (VSs) treated with stereotactic radiosurgery > 10 years previously. The aim of this study was to confirm whether Gamma Knife surgery (GKS) for VSs continues to be safe and effective > 10 years after treatment. Methods A total of 440 patients with VS (including neurofibromatosis Type 2) treated with GKS between May 1991 and December 2000 were evaluable. Of these, 347 patients (79%) underwent GKS as an initial treatment and 93 (21%) had undergone prior resection. Three hundred fifty-eight patients (81%) had a solid tumor and 82 (19%) had a cystic tumor. The median tumor volume was 2.8 cm(3) and the median marginal dose was 12.8 Gy. Results The median follow-up period was 12.5 years. The actuarial 5- and ≥ 10-year progression-free survival was 93% and 92%, respectively. No patient developed treatment failure > 10 years after treatment. According to multivariate analysis, significant factors related to worse progression-free survival included brainstem compression with a deviation of the fourth ventricle (p < 0.0001), marginal dose ≤ 13 Gy (p = 0.01), prior treatment (p = 0.02), and female sex (p = 0.02). Of 287 patients treated at a recent optimum dose of ≤ 13 Gy, 3 (1%) developed facial palsy, including 2 with transient palsy and 1 with persistent palsy after a second GKS, and 3 (1%) developed facial numbness, including 2 with transient and 1 with persistent facial numbness. The actuarial 10-year facial nerve preservation rate was 97% in the high marginal dose group (> 13 Gy) and 100% in the low marginal dose group (≤ 13 Gy). Ten patients (2.3%) developed delayed cyst formation. One patient alone developed malignant transformation, indicating an incidence of 0.3%. Conclusions In this study GKS was a safe and effective treatment for the majority of patients followed > 10 years after treatment. Special attention should be paid to cyst formation and malignant transformation as late adverse radiation effects, although they appeared to be rare. However, it is necessary to collect further long-term follow-up data before making conclusions about the long-term safety and efficacy of GKS, especially for young patients with VSs.
Flood hazard assessment for french NPPs

NASA Astrophysics Data System (ADS)

Rebour, Vincent; Duluc, Claire-Marie; Guimier, Laurent

2015-04-01

This paper presents the approach for flood hazard assessment for NPP which is on-going in France in the framework of post-Fukushima activities. These activities were initially defined considering both European "stress tests" of NPPs pursuant to the request of the European Council, and the French safety audit of civilian nuclear facilities in the light of the Fukushima Daiichi accident. The main actors in that process are the utility (EDF is, up to date, the unique NPP's operator in France), the regulatory authority (ASN) and its technical support organization (IRSN). This paper was prepared by IRSN, considering official positions of the other main actors in the current review process, it was not officially endorsed by them. In France, flood hazard to be considered for design basis definition (for new NPPs and for existing NPPs in periodic safety reviews conducted every 10 years) was revised before Fukushima-Daichi accident, due to le Blayais NPP December 1999 experience (partial site flooding and loss of some safety classified systems). The paper presents in the first part an overview of the revised guidance for design basis flood. In order to address design extension conditions (conditions that could result from natural events exceeding the design basis events), a set of flooding scenarios have been defined by adding margins on the scenarios that are considered for the design. Due to the diversity of phenomena to be considered for flooding hazard, the margin assessment is specific to each flooding scenario in terms of parameter to be penalized and of degree of variation of this parameter. The general approach to address design extension conditions is presented in the second part of the paper. The next parts present the approach for five flooding scenarios including design basis scenario and additional margin to define design extension scenarios.
Treatment response assessment of radiofrequency ablation for hepatocellular carcinoma: usefulness of virtual CT sonography with magnetic navigation.

PubMed

Minami, Yasunori; Kitai, Satoshi; Kudo, Masatoshi

2012-03-01

Virtual CT sonography using magnetic navigation provides cross sectional images of CT volume data corresponding to the angle of the transducer in the magnetic field in real-time. The purpose of this study was to clarify the value of this virtual CT sonography for treatment response of radiofrequency ablation for hepatocellular carcinoma. Sixty-one patients with 88 HCCs measuring 0.5-1.3 cm (mean±SD, 1.0±0.3 cm) were treated by radiofrequency ablation. For early treatment response, dynamic CT was performed 1-5 days (median, 2 days). We compared early treatment response between axial CT images and multi-angle CT images using virtual CT sonography. Residual tumor stains on axial CT images and multi-angle CT images were detected in 11.4% (10/88) and 13.6% (12/88) after the first session of RFA, respectively (P=0.65). Two patients were diagnosed as showing hyperemia enhancement after the initial radiofrequency ablation on axial CT images and showed local tumor progression shortly because of unnoticed residual tumors. Only virtual CT sonography with magnetic navigation retrospectively showed the residual tumor as circular enhancement. In safety margin analysis, 10 patients were excluded because of residual tumors. The safety margin more than 5 mm by virtual CT sonographic images and transverse CT images were determined in 71.8% (56/78) and 82.1% (64/78), respectively (P=0.13). The safety margin should be overestimated on axial CT images in 8 nodules. Virtual CT sonography with magnetic navigation was useful in evaluating the treatment response of radiofrequency ablation therapy for hepatocellular carcinoma. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.
Improved safety margin for embryotoxicity in rats for the new endoperoxide artefenomel (OZ439) as compared to artesunate.

PubMed

Clark, Robert L; Edwards, Tammye L; Longo, Monica; Kinney, Joseph; Walker, Don K; Rhodes, Jon; Clode, Sally A; Rückle, Thomas; Wells, Timothy; Andenmatten, Nicole; Huber, Anna Christine

2018-04-17

Combination medicines including an artemisinin are the mainstay of antimalarial therapy. Artemisinins are potent embryotoxicants in animal species due to their trioxane moiety. As part of its development, the new synthetic trioxolane antimalarial artefenomel (OZ439) was tested in rat whole embryo culture and in rat embryo-fetal toxicity studies with dosing throughout organogenesis or with a single dose on Gestational Day (GD) 12. The single-dose studies included groups treated with artesunate to allow a direct comparison of the embryotoxicity of the two antimalarials and included toxicokinetics hematology and histological examination of embryos. In addition, the distribution of artefenomel-related material in plasma was determined after the administration of 14 C-artefenomel. Artefenomel and artesunate showed similar patterns of embryotoxicity including cardiovascular defects and resorption with a steep dose-response. They both also caused a depletion of circulating embryonic erythroblasts both in vitro and in vivo and decreases in maternal reticulocyte count. However, artefenomel was ∼250-fold less potent than the active metabolite of artesunate (dihydroartemisinin) as an embryotoxicant in vitro. The safety margin (based on AUC) for artefenomel administered on GD 12 was approximately 100-fold greater than that for artesunate. Also, unlike artesunate, artefenomel was not a selective developmental toxicant. The lesser embryotoxicity of artefenomel is likely linked to its original design which included two blocking side groups that had been introduced to lower the reactivity with ferrous iron. Our data support the hypothesis that artefenomel's improved safety margin is linked to a lower potential for inhibiting heme biosynthesis in embryonic erythroblasts. © 2017 The Authors. Birth Defects Research Published by Wiley Periodicals, Inc.
Marginal lung donors: A diminishing margin of safety?

PubMed

Botha, Phil; Fisher, Andrew J; Dark, John H

2006-11-27

Lung donor shortages have resulted in the critical appraisal of cadaveric donor acceptability criteria and the gradual relaxation of once strict guidelines. Many centers have reported their results with these "extended criteria" donors and an increasing number of multicenter registry studies have also been published. The results have been contradictory and leave many questions unanswered. Important new data has however come to light since the last review of the subject by the International Society for Heart and Lung Transplantation Pulmonary Council. We review the current literature focusing on recent developments in the pursuit of an expanded lung donor pool with acceptable outcomes.
Efficacy and toxicity of Samen-ista emulsion on treatment of cutaneous and mucosal bleeding.

PubMed

Hosseini, Mousalreza; Pourakbar, Ali; Forouzanfar, Fatemeh; Arian, Amirali; Ghaffarzadegan, Kamran; Salehi, Maryam; Esfandiari, Samaneh; Rakhshandeh, Hassan

2016-10-01

Despite new treatment methods, upper gastrointestinal bleeding remains challenging. Samen-ista emulsion is a new agent based on traditional medicine with coagulant properties. The efficacy and safety of Samen-ista were assessed in cutaneous and mucosal bleeding animal models. Coagulant properties of Samen-ista were evaluated using mice tail bleeding assay, marginal ear vein and upper gastrointestinal mucosal bleeding times in rabbits. After 7 days, clinical signs, mortality and end-organ (kidney, liver, lung, brain and gastric mucosa) histopathological changes were also examined. Samen-ista dose-dependently decreased mean cutaneous tail (128 vs. 14 s) and marginal ear vein (396 vs. 84 s) bleeding times. Rabbit's upper gastrointestinal bleeding time was also significantly decreased (214 vs. 15.8 s) upon Samen-ista local endoscopic application. Treatment with Samen-ista for 7 days did not cause any mortality, abnormal signs of bleeding, changes in appetite or significant histopathologicl changes. Samen-ista emulsion is well tolerated and highly effective in achieving hemostasis in cutaneous and mucosal bleeding animal models.
Methodology Development for Passive Component Reliability Modeling in a Multi-Physics Simulation Environment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Aldemir, Tunc; Denning, Richard; Catalyurek, Umit

Reduction in safety margin can be expected as passive structures and components undergo degradation with time. Limitations in the traditional probabilistic risk assessment (PRA) methodology constrain its value as an effective tool to address the impact of aging effects on risk and for quantifying the impact of aging management strategies in maintaining safety margins. A methodology has been developed to address multiple aging mechanisms involving large numbers of components (with possibly statistically dependent failures) within the PRA framework in a computationally feasible manner when the sequencing of events is conditioned on the physical conditions predicted in a simulation environment, suchmore » as the New Generation System Code (NGSC) concept. Both epistemic and aleatory uncertainties can be accounted for within the same phenomenological framework and maintenance can be accounted for in a coherent fashion. The framework accommodates the prospective impacts of various intervention strategies such as testing, maintenance, and refurbishment. The methodology is illustrated with several examples.« less
Nozzle extension design status report

NASA Technical Reports Server (NTRS)

Classen, L. B.

1972-01-01

Twenty possible concepts of a possible nozzle/nozzle extension interface were originated. Not all of the concepts were considered worthy of analysis time. Six of them were thermally analyzed and three were stress analyzed. These analyses were done to determine which of the concepts would have the best chance of succeeding, that is, they were a screening process which was to allow rating of one concept against another. This was done because adequate material properties to determine absolute stress levels were not available at the time of the analyses. Through all of the concepts still exhibit some areas of negative margin of safety, concept no. 1 shows good promise that, with slight modifications, it could have all positive margins of safety. Another significant question, regarding these designs, has to do with the Grafoil seals and insulators. Some additional data was just recently received on Grafoil properties, but it was too late to incorporate in the analyses. The new data were not significantly different from the properties which were used.
Groundwater flow modeling of periods with periglacial and glacial climate conditions for the safety assessment of the proposed high-level nuclear waste repository site at Forsmark, Sweden

NASA Astrophysics Data System (ADS)

Vidstrand, Patrik; Follin, Sven; Selroos, Jan-Olof; Näslund, Jens-Ove

2014-09-01

The impact of periglacial and glacial climate conditions on groundwater flow in fractured crystalline rock is studied by means of groundwater flow modeling of the Forsmark site, which was recently proposed as a repository site for the disposal of spent high-level nuclear fuel in Sweden. The employed model uses a thermal-hydraulically coupled approach for permafrost modeling and discusses changes in groundwater flow implied by the climate conditions found over northern Europe at different times during the last glacial cycle (Weichselian glaciation). It is concluded that discharge of particles released at repository depth occurs very close to the ice-sheet margin in the absence of permafrost. If permafrost is included, the greater part discharges into taliks in the periglacial area. During a glacial cycle, hydraulic gradients at repository depth reach their maximum values when the ice-sheet margin passes over the site; at this time, also, the interface between fresh and saline waters is distorted the most. The combined effect of advances and retreats during several glaciations has not been studied in the present work; however, the results indicate that hydrochemical conditions at depth in the groundwater flow model are almost restored after a single event of ice-sheet advance and retreat.
Marginal kidney donor

PubMed Central

Gopalakrishnan, Ganesh; Gourabathini, Siva Prasad

2007-01-01

Renal transplantation is the treatment of choice for a medically eligible patient with end stage renal disease. The number of renal transplants has increased rapidly over the last two decades. However, the demand for organs has increased even more. This disparity between the availability of organs and waitlisted patients for transplants has forced many transplant centers across the world to use marginal kidneys and donors. We performed a Medline search to establish the current status of marginal kidney donors in the world. Transplant programs using marginal deceased renal grafts is well established. The focus is now on efforts to improve their results. Utilization of non-heart-beating donors is still in a plateau phase and comprises a minor percentage of deceased donations. The main concern is primary non-function of the renal graft apart from legal and ethical issues. Transplants with living donors outnumbered cadaveric transplants at many centers in the last decade. There has been an increased use of marginal living kidney donors with some acceptable medical risks. Our primary concern is the safety of the living donor. There is not enough scientific data available to quantify the risks involved for such donation. The definition of marginal living donor is still not clear and there are no uniform recommendations. The decision must be tailored to each donor who in turn should be actively involved at all levels of the decision-making process. In the current circumstances, our responsibility is very crucial in making decisions for either accepting or rejecting a marginal living donor. PMID:19718332
Favourable results of Mohs micrographic surgery for basal cell carcinoma.

PubMed

Gniadecki, Robert; Glud, Martin; Mortensen, Kia; Bang, Bo; Biskup, Edyta; Omland, Silje Haukali

2015-12-01

Basal cell carcinoma (BCC) is the most common malignant neoplasm with an annual incidence approaching 200/100,000 person-years. Mohs micrographic surgery (MMS) is widely used in North America and in Europe for treatment of BCC. This technique ensures radical tumour removal, sparing of the surrounding healthy skin, and it also offers higher cure rates than standard tumour excision with a predefined margin of healthy skin. The superiority of MMS relies on the fact that the entire (100%) margin of the excised tissue is examined microscopically for residual tumour in contrast to the traditional histopathological examination, in which 2% of the margin is examined. In Denmark, MMS was first introduced by us in 2012. In the present study, we retrospectively included all patients who underwent MMS from May 2012 to June 2015. A total of 231 patients with 263 BCC were included. The mean age was 66.1 years. The most common localisations were the forehead (31.3%), the nose (31.0%) and the cheek (14.7%). Primary BCC comprised 54.0%; the remaining cases were relapses, most frequently after curettage (36.9%), radiotherapy (18.9%) and photodynamic therapy (11.7%). MMS leads to 40% smaller skin defects than standard excisions with 4 or 6 mm margins. Closure of skin defects was achieved by side-to-side closure in 49% and by local flaps in 40%. There were no relapses during the observation time. The safety, cosmetic and functional outcome were excellent. We recommend that MMS be included in the Danish BCC treatment guidelines, especially for high-risk BCC in the face, in line with standard practice in Europe and the United States. none. not relevant.
An evaluation of two conducted electrical weapons and two probe designs using a swine comparative cardiac safety model.

PubMed

Dawes, Donald Murray; Ho, Jeffrey D; Moore, Johanna C; Miner, James R

2013-09-01

Despite human laboratory and field studies that have demonstrated a reasonable safety profile for TASER brand conducted electrical weapons (CEW), the results of some swine studies and arrest related deaths temporal to the use of the CEWs continue to raise questions regarding cardiac safety. TASER International, Inc., has released a new CEW, the TASER X2, touted to have a better safety profile than its long-standing predecessor, the TASER X26. We have developed a model to assess the relative cardiac safety of CEWs and used it to compare the TASER X2 and the TASER X26. This safety model was also used to assess the relative safety of an experimental probe design as compared to the standard steel probe. Our results suggest that the TASER X2 has an improved safety margin over the TASER X26. The new probe design also has promise for enhanced cardiac safety, although may have some disadvantages when compared to the existing design which would make field use impractical.
The synthetic diazonamide DZ-2384 has distinct effects on microtubule curvature and dynamics without neurotoxicity

PubMed Central

Wieczorek, Michal; Tcherkezian, Joseph; Bernier, Cynthia; Prota, Andrea E.; Chaaban, Sami; Rolland, Yannève; Godbout, Claude; Hancock, Mark A.; Arezzo, Joseph C.; Ocal, Ozhan; Rocha, Cecilia; Olieric, Natacha; Hall, Anita; Ding, Hui; Bramoullé, Alexandre; Annis, Matthew G.; Zogopoulos, George; Harran, Patrick G.; Wilkie, Thomas M.; Brekken, Rolf A.; Siegel, Peter M.; Steinmetz, Michel O.; Shore, Gordon C.; Brouhard, Gary J.; Roulston, Anne

2017-01-01

Microtubule-targeting agents (MTAs) are widely used anticancer agents, but toxicities such as neuropathy limit their clinical use. MTAs bind to and alter the stability of microtubules, causing cell death in mitosis. We describe DZ-2384, a preclinical compound that exhibits potent antitumor activity in models of multiple cancer types. It has an unusually high safety margin and lacks neurotoxicity in rats at effective plasma concentrations. DZ-2384 binds the vinca domain of tubulin in a distinct way, imparting structurally and functionally different effects on microtubule dynamics compared to other vinca-binding compounds. X-ray crystallography and electron microscopy studies demonstrate that DZ-2384 causes straightening of curved protofilaments, an effect proposed to favor polymerization of tubulin. Both DZ-2384 and the vinca alkaloid vinorelbine inhibit microtubule growth rate; however, DZ-2384 increases the rescue frequency and preserves the microtubule network in nonmitotic cells and in primary neurons. This differential modulation of tubulin results in a potent MTA therapeutic with enhanced safety. PMID:27856798

White-Tailed Deer Response to Vehicle Approach: Evidence of Unclear and Present Danger

PubMed Central

Blackwell, Bradley F.; Seamans, Thomas W.; DeVault, Travis L.

2014-01-01

The fundamental causes of animal-vehicle collisions are unclear, particularly at the level of animal detection of approaching vehicles and decision-making. Deer-vehicle collisions (DVCs) are especially costly in terms of animal mortality, property damage, and safety. Over one year, we exposed free-ranging white-tailed deer (Odocoileus virginianus) to vehicle approach under low ambient light conditions, from varying start distances, and vehicle speeds from 20 km/h to approximately 90 km/h. We modeled flight response by deer to an approaching vehicle and tested four hypotheses: 1) flight-initiation distance (FID) would correlate positively with start distance (indicating a spatial margin of safety); 2) deer would react to vehicle speed using a temporal margin of safety; 3) individuals reacting at greater FIDs would be more likely to cross the path of the vehicle; and 4) crossings would correlate positively with start distance, approach speed, and distance to concealing/refuge cover. We examined deer responses by quantiles. Median FID was 40% of start distance, irrespective of start distance or approach speed. Converting FID to time-to-collision (TTC), median TTC was 4.6 s, but uncorrelated with start distance or approach speed. The likelihood of deer crossing in front of the vehicle was not associated with greater FIDs or other explanatory variables. Because deer flight response to vehicle approach was highly variable, DVCs should be more likely with increasing vehicle speeds because of lower TTCs for a given distance. For road sections characterized by frequent DVCs, we recommend estimating TTC relative to vehicle speed and candidate line-of-sight distances adjusted downward by (1-P), where P represents our findings for the proportion of start distance by which >75% of deer had initiated flight. Where road design or conservation goals limit effectiveness of line-of-sight maintenance, we suggest incorporation of roadway obstacles that force drivers to slow vehicles, in addition to posting advisory speed limits. PMID:25333922
Dosimetric evaluation of intrafractional tumor motion by means of a robot driven phantom

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richter, Anne; Wilbert, Juergen; Flentje, Michael

2011-10-15

Purpose: The aim of the work was to investigate the influence of intrafractional tumor motion to the accumulated (absorbed) dose. The accumulated dose was determined by means of calculations and measurements with a robot driven motion phantom. Methods: Different motion scenarios and compensation techniques were realized in a phantom study to investigate the influence of motion on image acquisition, dose calculation, and dose measurement. The influence of motion on the accumulated dose was calculated by employing two methods (a model based and a voxel based method). Results: Tumor motion resulted in a blurring of steep dose gradients and a reductionmore » of dose at the periphery of the target. A systematic variation of motion parameters allowed the determination of the main influence parameters on the accumulated dose. The key parameters with the greatest influence on dose were the mean amplitude and the pattern of motion. Investigations on necessary safety margins to compensate for dose reduction have shown that smaller safety margins are sufficient, if the developed concept with optimized margins (OPT concept) was used instead of the standard internal target volume (ITV) concept. Both calculation methods were a reasonable approximation of the measured dose with the voxel based method being in better agreement with the measurements. Conclusions: Further evaluation of available systems and algorithms for dose accumulation are needed to create guidelines for the verification of the accumulated dose.« less
Can basal cell carcinoma lateral border be determined by fluorescence diagnosis?: Verification by Mohs micrographic surgery.

PubMed

El Hoshy, Khaled; Bosseila, Manal; El Sharkawy, Dina; Sobhi, Rehab

2016-06-01

The preferential accumulation of 5-aminolaevulinic acid (ALA)-induced protoporphyrin IX (PpIX) in neoplastic cells supports its potential use in the photodetection of epithelial tumours through porphyrin fluorescence. To assess the validity of fluorescence diagnosis (FD) as an efficient pre-surgical in vivo imaging tool for defining the lateral boundaries of various types of basal cell carcinomas (BCCs). The BCC tumour area was determined for 27 patients using FD digitalized imaging system, where the accumulation of PpIX in tumour tissue in relation to normal tissue was measured. Subsequently, BCCs were excised according to the complete area defined by FD using Mohs micrographic surgery (MMS). Of the 27 BCCs, the FD margin of the lesion coincided with the histopathological picture in 12 BCCs (44.44%). The mean value of accumulation factor (AF) was 2.7. Although 17 pigmented BCCs showed attenuated or absent fluorescence in the center, fluorescence at their periphery was used as a guide for excision, and statistically, the pigmentation of the BCCs showed no effect on the results of the FD efficacy (p=1.0). Fluorescence diagnosis of BCC may be beneficial as a guide to the safety margin needed before MMS. The safety margin is decided according to the FD tumour diameter in relation to the clinical tumour diameter. Copyright © 2016 Elsevier B.V. All rights reserved.
Safety and efficacy of LigaSure usage in pancreaticoduodenectomy.

PubMed

Eng, Oliver S; Goswami, Julie; Moore, Dirk; Chen, Chunxia; Brumbaugh, Jennifer; Gannon, Christopher J; August, David A; Carpizo, Darren R

2013-10-01

Over recent years, use of the LigaSure™ vessel sealing device has increased in major abdominal surgery to include pancreaticoduodenectomy (PD). LigaSure™ use during PD has expanded to include all steps of the procedure, including the division of the uncinate margin. This introduces the potential for thermal major vascular injury or margin positivity. The aim of the present study was to evaluate the safety and efficacy of LigaSure™ usage in PD in comparison to established dissection techniques. One hundred and forty-eight patients who underwent PD from 2007 to 2012 at Robert Wood Johnson University Hospital were identified from a retrospective database. Two groups were recognized: those in which the LigaSure™ device was used (N = 114), and in those it was not (N = 34). Peri-operative outcomes were compared. Vascular intra-operative complications directly caused by thermal injury from LigaSure™ use occurred in 1.8% of patients. Overall vascular intra-operative complications, uncinate margin positivity, blood loss, length of stay, and complication severity were not significantly different between groups. The mean operative time was 77 min less (P < 0.010) in the LigaSure™ group. Savings per case where the LigaSure™ was used amounted to $1776.73. LigaSure™ usage during PD is safe and effective. It is associated with decreased operative times, which may decrease operative costs in PD. © 2013 International Hepato-Pancreato-Biliary Association.
Safety and efficacy of LigaSure usage in pancreaticoduodenectomy

PubMed Central

Eng, Oliver S; Goswami, Julie; Moore, Dirk; Chen, Chunxia; Brumbaugh, Jennifer; Gannon, Christopher J; August, David A; Carpizo, Darren R

2013-01-01

Background Over recent years, use of the LigaSure™ vessel sealing device has increased in major abdominal surgery to include pancreaticoduodenectomy (PD). LigaSure™ use during PD has expanded to include all steps of the procedure, including the division of the uncinate margin. This introduces the potential for thermal major vascular injury or margin positivity. The aim of the present study was to evaluate the safety and efficacy of LigaSure™ usage in PD in comparison to established dissection techniques. Methods One hundred and forty-eight patients who underwent PD from 2007 to 2012 at Robert Wood Johnson University Hospital were identified from a retrospective database. Two groups were recognized: those in which the LigaSure™ device was used (N = 114), and in those it was not (N = 34). Peri-operative outcomes were compared. Results Vascular intra-operative complications directly caused by thermal injury from LigaSure™ use occurred in 1.8% of patients. Overall vascular intra-operative complications, uncinate margin positivity, blood loss, length of stay, and complication severity were not significantly different between groups. The mean operative time was 77 min less (P < 0.010) in the LigaSure™ group. Savings per case where the LigaSure™ was used amounted to $1776.73. Conclusion LigaSure™ usage during PD is safe and effective. It is associated with decreased operative times, which may decrease operative costs in PD. PMID:23782268
Vulnerability, safety and response of nuclear power plants to the hydroclimatic hazards

NASA Astrophysics Data System (ADS)

János Katona, Tamás; Vilimi, András

2016-04-01

The Great Tohoku Earthquake and Tsunami, and the severe accident at Fukushima Dai-ichi nuclear power plant 2011 alerted the nuclear industry to danger of extreme rare natural hazards. The subsequent "stress tests" performed by the nuclear industry in Europe and all over the world identifies the nuclear power plant (NPP) vulnerabilities and define the measures for increasing the plant safety. According to the international practice of nuclear safety regulations, the cumulative core damage frequency for NPPs has to be 10-5/a, and the cumulative frequency of early large release has to be 10-6/a. In case of operating plants these annual probabilities can be little higher, but the licensees are obliged to implement all reasonable practicable measures for increasing the plant safety. For achieving the required level of safety, design basis of NPPs for natural hazards has to be defined at the 10-4/a ⎯10-5/a levels of annual exceedance probability. Tornado hazard is some kind of exception, e.g., the design basis annual probability for tornado in the US is equal to 10-7/a. Design of the NPPs shall provide for an adequate margin to protect items ultimately necessary to prevent large or early radioactive releases in the event of levels of natural hazards exceeding those to be considered for design. The plant safety has to be reviewed for accounting the changes of the environmental conditions and natural hazards in case of necessity, but as minimum every ten years in the frame of periodic safety reviews. Long-term forecast of environmental conditions and hazards has to be accounted for in the design basis of the new plants. Changes in hydroclimatic variables, e.g., storms, tornadoes, river floods, flash floods, extreme temperatures, droughts affect the operability and efficiency as well as the safety the NPPs. Low flow rates and high water temperature in the rivers may force to operate at reduced power level or shutdown the plant (Cernavoda NPP, Romania, August 2009). The practice demonstrated that the NPPs could safely withstand the meteorological extremes (Katrina hurricane, 2005). However the floods at some sites cause significant safety issues. Design of NPPs and their response to extreme hydroclimatic events depends on the features of particular hazards, e.g., predictability, possibility and time available for the protective actions, potential for causing cliff-edge effects and the possible combinations of events. The uncertainty of the prediction of extreme values for the design and safety assessment is a fundamental issue. In the paper the consequences of hydroclimatic extremes are analysed for nuclear power plants. The possibility of operational response to extremes is presented. The safety margins are assessed with respect to the effects caused by hydroclimatic extremes. The direct actions (e.g. wind) and the indirect consequences (e.g. changing of ground water level) are also considered. Methods for accounting the uncertainties of the characterisation of low probability hazards are also considered. The preparedness to severe hydroclimatic conditions / events and actions for mitigation and management are presented and discussed. The considerations in the paper are illustrated by the case of the Paks Nuclear Power Plant, Hungary.
Safety assessments of subcutaneous doses of aragonite calcium carbonate nanocrystals in rats

NASA Astrophysics Data System (ADS)

Jaji, Alhaji Zubair; Zakaria, Zuki Abu Bakar; Mahmud, Rozi; Loqman, Mohamad Yusof; Hezmee, Mohamad Noor Mohamad; Abba, Yusuf; Isa, Tijani; Mahmood, Saffanah Khuder

2017-05-01

Calcium carbonate nanoparticles have shown promising potentials in the delivery of drugs and metabolites. There is however, a paucity of information on the safety of their intentional or accidental over exposures to biological systems and general health safety. To this end, this study aims at documenting information on the safety of subcutaneous doses of biogenic nanocrystals of aragonite polymorph of calcium carbonate derived from cockle shells (ANC) in Sprague-Dawley (SD) rats. ANC was synthesized using the top-down method, characterized using the transmission electron microscopy and field emission scanning electron microscope and its acute and repeated dose 28-day trial toxicities were evaluated in SD rats. The results showed that the homogenous 30 ± 5 nm-sized spherical pure aragonite nanocrystals were not associated with mortality in the rats. Severe clinical signs and gross and histopathological lesions, indicating organ toxicities, were recorded in the acute toxicity (29,500 mg/m2) group and the high dose (5900 mg/m2) group of the repeated dose 28-day trial. However, the medium- (590 mg/m2 body weight) and low (59 mg/m2)-dose groups showed moderate to mild lesions. The relatively mild lesions observed in the low toxicity dosage group marked the safety margin of ANC in SD rats. It was concluded from this study that the toxicity of CaCO3 was dependent on the particulate size (30 ± 5 nm) and concentration and the route of administration used.
Development of a generalized perturbation theory method for sensitivity analysis using continuous-energy Monte Carlo methods

DOE PAGES

Perfetti, Christopher M.; Rearden, Bradley T.

2016-03-01

The sensitivity and uncertainty analysis tools of the ORNL SCALE nuclear modeling and simulation code system that have been developed over the last decade have proven indispensable for numerous application and design studies for nuclear criticality safety and reactor physics. SCALE contains tools for analyzing the uncertainty in the eigenvalue of critical systems, but cannot quantify uncertainty in important neutronic parameters such as multigroup cross sections, fuel fission rates, activation rates, and neutron fluence rates with realistic three-dimensional Monte Carlo simulations. A more complete understanding of the sources of uncertainty in these design-limiting parameters could lead to improvements in processmore » optimization, reactor safety, and help inform regulators when setting operational safety margins. A novel approach for calculating eigenvalue sensitivity coefficients, known as the CLUTCH method, was recently explored as academic research and has been found to accurately and rapidly calculate sensitivity coefficients in criticality safety applications. The work presented here describes a new method, known as the GEAR-MC method, which extends the CLUTCH theory for calculating eigenvalue sensitivity coefficients to enable sensitivity coefficient calculations and uncertainty analysis for a generalized set of neutronic responses using high-fidelity continuous-energy Monte Carlo calculations. Here, several criticality safety systems were examined to demonstrate proof of principle for the GEAR-MC method, and GEAR-MC was seen to produce response sensitivity coefficients that agreed well with reference direct perturbation sensitivity coefficients.« less
Getting to Zero Yield: The Evolution of the U.S. Position on the CTBT

NASA Astrophysics Data System (ADS)

Zimmerman, Peter D.

1998-03-01

In 1994 the United States favored a Comprehensive Test Ban Treaty (CTBT) which permitted tiny "hydronuclear" experiments with a nuclear energy release of four pounds or less. Other nuclear powers supported yield limits as high as large fractions of a kiloton, while most non-nuclear nations participating in the discussions at the United Nations Conference on Disarmament wanted to prohibit all nuclear explosions -- some even favoring an end to computer simulations. On the other hand, China wished an exception to permit high yield "peaceful" nuclear explosions. For the United States to adopt a new position favoring a "true zero" several pieces had to fall into place: 1) The President had to be assured that the U.S. could preserve the safety and reliability of the enduring stockpile without yield testing; 2) the U.S. needed to be sure that the marginal utility of zero-yield experiments was at least as great for this country as for any other; 3) that tests with any nuclear yield might have more marginal utility for nuclear proliferators than for the United States, thus marginally eroding this country's position; 4) the United States required a treaty which would permit maintenance of the capacity to return to testing should a national emergency requiring a nuclear test arise; and 5) all of the five nuclear weapons states had to realize that only a true-zero CTBT would have the desired political effects. This paper will outline the physics near zero yield and show why President Clinton was persuaded by arguments from many viewpoints to endorse a true test ban in August, 1996 and to sign the CTBT in September, 1997.
RAVEN Theory Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alfonsi, Andrea; Rabiti, Cristian; Mandelli, Diego

2016-06-01

RAVEN is a software framework able to perform parametric and stochastic analysis based on the response of complex system codes. The initial development was aimed at providing dynamic risk analysis capabilities to the thermohydraulic code RELAP-7, currently under development at Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose stochastic and uncertainty quantification platform, capable of communicating with any system code. In fact, the provided Application Programming Interfaces (APIs) allow RAVEN to interact with any code as long as all the parameters that need to be perturbed are accessible by input filesmore » or via python interfaces. RAVEN is capable of investigating system response and explore input space using various sampling schemes such as Monte Carlo, grid, or Latin hypercube. However, RAVEN strength lies in its system feature discovery capabilities such as: constructing limit surfaces, separating regions of the input space leading to system failure, and using dynamic supervised learning techniques. The development of RAVEN started in 2012 when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework arose. RAVEN’s principal assignment is to provide the necessary software and algorithms in order to employ the concepts developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just to identify the frequency of an event potentially leading to a system failure, but the proximity (or lack thereof) to key safety-related events. Hence, the approach is interested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. peak pressure in a pipe) is exceeded under certain conditions. Most of the capabilities, implemented having RELAP-7 as a principal focus, are easily deployable to other system codes. For this reason, several side activates have been employed (e.g. RELAP5-3D, any MOOSE-based App, etc.) or are currently ongoing for coupling RAVEN with several different software. The aim of this document is to provide a set of commented examples that can help the user to become familiar with the RAVEN code usage.« less
Guidance for the safety assessment of botanicals and botanical preparations for use in food and food supplements.

PubMed

Schilter, B; Andersson, C; Anton, R; Constable, A; Kleiner, J; O'Brien, J; Renwick, A G; Korver, O; Smit, F; Walker, R

2003-12-01

There is a growing interest by both consumers and industry for the development of food products with 'functional' properties, or health benefits. These products may take the form of dietary supplements or of foods. The health benefits are given by particular ingredients, and in many cases these are derived from botanicals. The variety of plants providing these functions is large, ranging from staple food sources such as cereals, fruits and vegetables, to herbals as used in traditional medicine. The food or ingredient conferring health properties may consist of the plants themselves, extracts thereof, or more purified components. The scientific literature is abundant with articles not only on the beneficial properties, but also on possible adverse health effects of plants and their components. The present report discusses the data required to determine the safe use of these types of ingredients, and provides advice on the development of risk assessment strategies consistent with due diligence under existing food regulations. Product specifications, composition and characterisation of standardised and authentic materials, documented history of use and comparison to existing products (taking into account the effect of industrial processing), description of the intended use and consequent exposure are highlighted as key background information on which to base a risk evaluation. The extent of experimental investigation required, such as in vitro, animal, and/or human studies, depends on the adequacy of this information. A decision tree is presented as an aid to determine the extent of data requirements based on product comparison. The ultimate safety in use depends on the establishment of an adequate safety margin between expected exposure and identified potential hazards. Health hazards may arise from inherent toxicities or contaminants of the plant materials, including the mechanism of the intended beneficial effect. A lower safety margin may therefore be expected than for food ingredients or additives where no physiological effects are intended. In rare cases, post launch monitoring programmes may be envisaged to confirm expected exposures and adequacy of the safety margin. This guidance document was elaborated by an expert group of the Natural Toxin Task Force of the European Branch of the International Life Sciences Institute--ILSI Europe and discussed with a wider audience of scientists at a workshop held on 13-15 May 2002 in Marseille, France.
Single-Coil Defibrillator Leads Yield Satisfactory Defibrillation Safety Margin in Hypertrophic Cardiomyopathy.

PubMed

Okamura, Hideo; Friedman, Paul A; Inoue, Yuko; Noda, Takashi; Aiba, Takeshi; Yasuda, Satoshi; Ogawa, Hisao; Kamakura, Shiro; Kusano, Kengo; Espinosa, Raul E

2016-09-23

Single-coil defibrillator leads have gained favor because of their potential ease of extraction. However, a high defibrillation threshold remains a concern in patients with hypertrophic cardiomyopathy (HCM), and in many cases, dual-coil leads have been used for this patient group. There is little data on using single-coil leads for HCM patients. We evaluated 20 patients with HCM who received an implantable cardioverter-defibrillator (ICD) on the left side in combination with a dual-coil lead. Two sets of defibrillation tests were performed in each patient, one with the superior vena cava (SVC) coil "on" and one with the SVC coil "off". ICDs were programmed to deliver 25 joules (J) for the first attempt followed by maximum energy (35 J or 40 J). Shock impedance and shock pulse width at 25 J in each setting as well as the results of the shock were analyzed. All 25-J shocks in both settings successfully terminated ventricular fibrillation. However, shock impedance and pulse width increased substantially with the SVC coil programmed "off" compared with "on" (66.4±6.1 ohm and 14.0±1.3 ms "off" vs. 41.9±5.0 ohm and 9.3±0.8 ms "on", P<0.0001 respectively). Biphasic 25-J shocks with the SVC coil 'off' successfully terminated ventricular fibrillation in HCM patients, indicating a satisfactory safety margin for 35-J devices. Single-coil leads appear appropriate for left-sided implantation in this patient group. (Circ J 2016; 80: 2199-2203).
Principles of Safety Pharmacology

PubMed Central

Pugsley, M K; Authier, S; Curtis, M J

2008-01-01

Safety Pharmacology is a rapidly developing discipline that uses the basic principles of pharmacology in a regulatory-driven process to generate data to inform risk/benefit assessment. The aim of Safety Pharmacology is to characterize the pharmacodynamic/pharmacokinetic (PK/PD) relationship of a drug's adverse effects using continuously evolving methodology. Unlike toxicology, Safety Pharmacology includes within its remit a regulatory requirement to predict the risk of rare lethal events. This gives Safety Pharmacology its unique character. The key issues for Safety Pharmacology are detection of an adverse effect liability, projection of the data into safety margin calculation and finally clinical safety monitoring. This article sets out to explain the drivers for Safety Pharmacology so that the wider pharmacology community is better placed to understand the discipline. It concludes with a summary of principles that may help inform future resolution of unmet needs (especially establishing model validation for accurate risk assessment). Subsequent articles in this issue of the journal address specific aspects of Safety Pharmacology to explore the issues of model choice, the burden of proof and to highlight areas of intensive activity (such as testing for drug-induced rare event liability, and the challenge of testing the safety of so-called biologics (antibodies, gene therapy and so on.). PMID:18604233
800 C Silicon Carbide (SiC) Pressure Sensors for Engine Ground Testing

NASA Technical Reports Server (NTRS)

Okojie, Robert S.

2016-01-01

MEMS-based 4H-SiC piezoresistive pressure sensors have been demonstrated at 800 C, leading to the discovery of strain sensitivity recovery with increasing temperatures above 400 C, eventually achieving up to, or near, 100 recovery of the room temperature values at 800 C. This result will allow the insertion of highly sensitive pressure sensors closer to jet, rocket, and hypersonic engine combustion chambers to improve the quantification accuracy of combustor dynamics, performance, and increase safety margin. Also, by operating at higher temperature and locating closer to the combustion chamber, reduction of the length (weight) of pressure tubes that are currently used will be achieved. This will result in reduced costlb to access space.
Marginalized zero-inflated negative binomial regression with application to dental caries

PubMed Central

Preisser, John S.; Das, Kalyan; Long, D. Leann; Divaris, Kimon

2015-01-01

The zero-inflated negative binomial regression model (ZINB) is often employed in diverse fields such as dentistry, health care utilization, highway safety, and medicine to examine relationships between exposures of interest and overdispersed count outcomes exhibiting many zeros. The regression coefficients of ZINB have latent class interpretations for a susceptible subpopulation at risk for the disease/condition under study with counts generated from a negative binomial distribution and for a non-susceptible subpopulation that provides only zero counts. The ZINB parameters, however, are not well-suited for estimating overall exposure effects, specifically, in quantifying the effect of an explanatory variable in the overall mixture population. In this paper, a marginalized zero-inflated negative binomial regression (MZINB) model for independent responses is proposed to model the population marginal mean count directly, providing straightforward inference for overall exposure effects based on maximum likelihood estimation. Through simulation studies, the finite sample performance of MZINB is compared to marginalized zero-inflated Poisson, Poisson, and negative binomial regression. The MZINB model is applied in the evaluation of a school-based fluoride mouthrinse program on dental caries in 677 children. PMID:26568034
75 FR 81126 - Revisions to Lead Ambient Air Monitoring Requirements

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... Council (NRDC), the Missouri Coalition for the Environment Foundation, Physicians for Social... estimates from the 2002 and 2005 NEI (Table 2) and estimated design values (i.e., 3-month rolling average Pb... year of lead to protect public health with an adequate margin of safety. The available evidence...
77 FR 54402 - Dichlorvos (DDVP); Order Denying NRDC's Objections on Remand

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-05

... may be calculated separately for different age-based population groups (e.g., non-nursing infants) or... in conjunction with experimental toxicity data in assessing risk to humans from exposure to chemical substances. (Ref. 4). These numerical factors are designed to provide an additional margin of safety so that...
Meteorological Satellites (METSAT) and Earth Observing System (EOS) Advanced Microwave Sounding Unit-A (AMSU-A) Stress Analysis Report

NASA Technical Reports Server (NTRS)

Heffner, Robert

1996-01-01

Stress analysis of the primary structure of the Meteorological Satellites Project (METSAT) Advanced Microwave Sounding Units-A, A1 Module using static loads is presented. The structural margins of safety and natural frequency predictions for the METSAT design are reported.
Pilot Convective Weather Decision Making in En Route Airspace

NASA Technical Reports Server (NTRS)

Wu, Shu-Chieh; Gooding, Cary L.; Shelley, Alexandra E.; Duong, Constance G.; Johnson, Walter W.

2012-01-01

The present research investigates characteristics exhibited in pilot convective weather decision making in en route airspace. In a part-task study, pilots performed weather avoidance under various encounter scenarios. Results showed that the margins of safety that pilots maintain from storms are as fluid as deviation decisions themselves.
14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Stress analysis. 33.62 Section 33.62... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...

14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Stress analysis. 33.62 Section 33.62... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...
14 CFR 33.62 - Stress analysis.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Stress analysis. 33.62 Section 33.62... STANDARDS: AIRCRAFT ENGINES Design and Construction; Turbine Aircraft Engines § 33.62 Stress analysis. A stress analysis must be performed on each turbine engine showing the design safety margin of each turbine...
77 FR 21594 - Duke Energy Carolinas, LLC; Environmental Assessment and Finding of No Significant Impact, Oconee...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... of light-water nuclear power reactors provide adequate margins of safety during any condition of... toughness requirements for protection against pressurized thermal shock (PTS) events. The proposed action... for Protection Against Pressurized Thermal Shock Events,'' and 10 CFR part 50 Appendix G, ``Fracture...
Earth Observing System (EOS)/Advanced Microwave Sounding Unit-A (AMSU-A) Stress Analysis Report, A1 Module. Addendum 1

NASA Technical Reports Server (NTRS)

Ely, W.

1996-01-01

This addendum reports the structural margins of safety and natural frequency predictions for the design following the EOS AMSU-A1 Mechanical/Structural Subsystem Critical Design Review (CDR), based on a new and more refined finite element model.
Acute Effects of an Alternative Electronic-Control-Device Waveform in Swine

DTIC Science & Technology

2009-03-01

sequences in a normal individual. Bozeman [32] suggested that lethality due to ECD impact could be due to hyperkalemia related to muscle contraction...and our previous investigations [1, 2], there may be a wide margin of safety, relative to hyperkalemia , for most ECD applications. The increase in
40 CFR 264.90 - Applicability.

Code of Federal Regulations, 2011 CFR

2011-07-01

... care period; or (4) The Regional Administrator finds that there is no potential for migration of liquid... margin of safety in the prediction of potential migration of liquid, the owner or operator must base any predictions made under this paragraph on assumptions that maximize the rate of liquid migration. (5) He...
40 CFR 264.90 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-07-01

... care period; or (4) The Regional Administrator finds that there is no potential for migration of liquid... margin of safety in the prediction of potential migration of liquid, the owner or operator must base any predictions made under this paragraph on assumptions that maximize the rate of liquid migration. (5) He...
Opinion of the Scientific Committee on Consumer Safety (SCCS) - Final version of the opinion on Phenoxyethanol in cosmetic products.

PubMed

Lilienblum, Werner

2016-12-01

The SCCS considers 2-phenoxyethanol safe for use as a preservative with a maximum concentration of 1.0%, taking into account the information provided. The toxicokinetics default factor of 4.0 can be reduced to 1.0 yielding a minimum Margin of Safety (MoS) of 25 instead of 100 for the safety assessment of 2-phenoxyethanol. Therefore, the MoS of about 50 for children also covers this specific age group who might be higher exposed to 2-phenoxyethanol than adults. This Opinion does not take into account exposure from sources other than cosmetics. Copyright Â© 2016 Elsevier Inc. All rights reserved.
Genuine worker participation-an indispensable key to effective global OHS.

PubMed

Brown, Garrett

2009-01-01

Working conditions, including workplace safety, in global supply chains of products sold by transnational corporations have only marginally improved over the last 15 years despite the development of hundreds of corporate "codes of conduct," code monitoring systems, and an elaborate new "corporate social responsibility" industry. The two underlying reasons for the lack of significant change are: 1) a schizophrenic business model which fatally undermines "socially responsible" sourcing programs with unyielding dictates for the lowest possible production costs; and 2) the lack of any meaningful participation by shop-floor workers in plant safety programs. Only when trained, empowered, and active workers are an integral part of workplace safety programs will conditions improve over the long term.
Estimation of the full marginal costs of port related truck traffic.

PubMed

Berechman, Joseph

2009-11-01

NY region is expected to grow by additional 1 million people by 2020, which translates into roughly 70 million more tons of goods to be delivered annually. Due to lack of rail capacity, mainly trucks will haul this volume of freight, challenging an already much constrained highway network. What are the total costs associated with this additional traffic, in particular, congestion, safety and emission? Since a major source of this expected flow is the Port of New York-New Jersey, this paper focuses on the estimation of the full marginal costs of truck traffic resulting from the further expansion of the port's activities.
Multispectral visualization of surgical safety-margins using fluorescent marker seeds

PubMed Central

Chin, Patrick TK; Beekman, Chantal AC; Buckle, Tessa; Josephson, Lee; van Leeuwen, Fijs WB

2012-01-01

Optical guidance provided by luminescent marker seeds may be suitable for intraoperative determination of appropriate resection margins. In phantom studies we compared the tissue penetration of several organic dyes and inorganic particles (quantum dots; QDs) after incorporation in experimental marker seeds. The tissue penetration of (near infra-) red organic dyes was much better than the penetration of dyes and QDs with an emission in the visible range. By combining 3 dyes in a single marker seed we were able to distinguish four depth ranges. The difference in tissue penetration between the dyes and QDS enabled depth estimation via a ‘traffic light’ approach. PMID:23133810
Improvements and applications of COBRA-TF for stand-alone and coupled LWR safety analyses

DOE Office of Scientific and Technical Information (OSTI.GOV)

Avramova, M.; Cuervo, D.; Ivanov, K.

2006-07-01

The advanced thermal-hydraulic subchannel code COBRA-TF has been recently improved and applied for stand-alone and coupled LWR core calculations at the Pennsylvania State Univ. in cooperation with AREVA NP GmbH (Germany)) and the Technical Univ. of Madrid. To enable COBRA-TF for academic and industrial applications including safety margins evaluations and LWR core design analyses, the code programming, numerics, and basic models were revised and substantially improved. The code has undergone through an extensive validation, verification, and qualification program. (authors)
The treatment of carcinoma in situ and squamous cell carcinoma of the conjunctiva with fractionated strontium-90 radiation in a population with a high prevalence of HIV.

PubMed

Lecuona, Karin; Stannard, Clare; Hart, Gregory; Rice, James; Cook, Colin; Wetter, Julie; Duffield, Maureen

2015-09-01

This study explores the safety and efficacy of strontium 90 (Sr-90) brachytherapy as the sole adjuvant therapy for carcinoma in situ (CIS) and squamous cell carcinoma (SCC) of the conjunctiva in a high HIV prevalent area. This is a retrospective case review of patients treated with 60 Gray Sr-90 brachytherapy in four divided doses after resection with a 2 mm margin and histological confirmation. Cryotherapy or alcohol debridement was not performed at the time of excision due to limited resources. Two plaque sizes, 8.5 mm and 18 mm, were used. Sixty-nine patients were treated and had a median follow-up of 27 months (range 6-127). Thirty-three (47.8%) were HIV-positive. CIS was present in 40.6% and SCC in 59.4%. The surgical margins were positive in 39 (56.5%). Twenty patients (29.0%) were treated with the 18 mm plaque and 49 (71.0%) with the 8.5 mm plaque. Eight (11.6%) patients developed a recurrence at a median of 5 months (range 2-40). Recurrences only occurred in patients treated with the 8.5 mm plaque (p=0.094). There was no significant effect of HIV status, positive margins or staging on the number of recurrences. Treatment side effects were a dry eye in five patients which was successfully managed with topical lubricants, and induced astigmatism of 1 dioptre of cylinder in one patient. Sr-90 brachytherapy is safe and effective in preventing recurrences in ocular surface squamous neoplasia in a high HIV prevalent setting. The 18 mm plaque size is superior to the 8.5 mm plaque size. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
[Sun protection factor 50+ : Pro and contra].

PubMed

Herzinger, T

2017-05-01

The use of sunscreens with sun protection factors beyond 50 is controversial. In order to avoid misleading the consumer, several countries have already decided not to declare SPF beyond 50 on sunscreen products. Arguments against high SPF include the following: the risk of imbalanced protection, which could increase the risk of damage caused by longer-wave ultraviolet radiation; imparting a false sense of safety, which could lead to the extension of sun exposure times; health risks from higher concentrations of filter substances; and the only marginally higher blockade provided by high SPF sunscreens. On the other hand, it has been realized that the functional SPF of sunscreens remains far behind the declared SPF in the practical application and, therefore, the use of higher SPF in sensitive individuals and during strong UV exposure could make sense.
Extraction-Separation Performance and Dynamic Modeling of Orion Test Vehicles with Adams Simulation: 3rd Edition

NASA Technical Reports Server (NTRS)

Varela, Jose G.; Reddy, Satish; Moeller, Enrique; Anderson, Keith

2017-01-01

NASA's Orion Capsule Parachute Assembly System (CPAS) Project is now in the qualification phase of testing, and the Adams simulation has continued to evolve to model the complex dynamics experienced during the test article extraction and separation phases of flight. The ability to initiate tests near the upper altitude limit of the Orion parachute deployment envelope requires extractions from the aircraft at 35,000 ft-MSL. Engineering development phase testing of the Parachute Test Vehicle (PTV) carried by the Carriage Platform Separation System (CPSS) at altitude resulted in test support equipment hardware failures due to increased energy caused by higher true airspeeds. As a result, hardware modifications became a necessity requiring ground static testing of the textile components to be conducted and a new ground dynamic test of the extraction system to be devised. Force-displacement curves from static tests were incorporated into the Adams simulations, allowing prediction of loads, velocities and margins encountered during both flight and ground dynamic tests. The Adams simulation was then further refined by fine tuning the damping terms to match the peak loads recorded in the ground dynamic tests. The failure observed in flight testing was successfully replicated in ground testing and true safety margins of the textile components were revealed. A multi-loop energy modulator was then incorporated into the system level Adams simulation model and the effect on improving test margins be properly evaluated leading to high confidence ground verification testing of the final design solution.
SponTaneous Respiration using IntraVEnous anaesthesia and Hi-flow nasal oxygen (STRIVE Hi) maintains oxygenation and airway patency during management of the obstructed airway: an observational study.

PubMed

Booth, A W G; Vidhani, K; Lee, P K; Thomsett, C-M

2017-03-01

High-flow nasal oxygen (HFNO) has been shown to benefit oxygenation, ventilation and upper airway patency in a range of clinical scenarios, however its use in spontaneously breathing patients during general anaesthesia has not been described. Spontaneous respiration using i.v. anaesthesia is the primary technique used at our institution for tubeless airway surgery. We hypothesized that the addition of HFNO would increase our margin of safety, particularly during management of an obstructed airway. A retrospective observational study was conducted using a SponTaneous Respiration using IntraVEnous anaesthesia and High-flow nasal oxygen (STRIVE Hi) technique to manage 30 adult patients undergoing elective laryngotracheal surgery. Twenty-six patients (87%) presented with significant airway and/or respiratory compromise (16 were stridulous, 10 were dyspnoeic). No episodes of apnoea or complete airway obstruction occurred during the induction of anaesthesia using STRIVE Hi. The median [IQR (range)] lowest oxygen saturation during the induction period was 100 [99–100 (97–100)] %. The median [IQR (range)] overall duration of spontaneous ventilation was 44 [40–49.5 (18–100)] min. The median [IQR (range)] end-tidal carbon dioxide (ETCO2) level at the end of the spontaneous ventilation period was 6.8 [6.4–7.1 (4.8–8.9)] kPa. The mean rate of increase in ETCO2 was 0.03 kPa min−1. STRIVE Hi succeeded in preserving adequate oxygen saturation, end-tidal carbon dioxide and airway patency. We suggest that the upper and lower airway benefits attributed to HFNO, are ideally suited to a spontaneous respiration induction, increasing its margin of safety. STRIVE Hi is a modern alternative to the traditional inhalation induction. © The Author 2017. Published by Oxford University Press on behalf of the British Journal of Anaesthesia.
Post-breakup faulting of the outer Vøring Margin

NASA Astrophysics Data System (ADS)

Planke, S.; Millett, J.; Jerram, D. A.; Maharjan, D.; Hafeez, A.; Abdelmalak, M. M.; Zastrozhnov, D.; Faleide, J. I.

2017-12-01

Tectonic activity on passive margins may continue for a long time after the main phase of continental breakup. On the southern Vøring Margin, offshore Norway, new high-quality 3D seismic data reveal the presence of extensive normal faults offsetting the Top basalt horizon, along with overlying lower Eocene age sediments. We have completed a detailed seismic interpretation of the new data using a combination of conventional seismic horizon interpretation and igneous seismic geomorphological techniques. The seismic data have been tied to scientific and industry wells to constrain the age of the interpreted horizons and the age and duration of the faulting. The Top basalt horizon displays a dominantly subaerial lava field, on the Vøring Marginal High, with well-defined lava flow morphologies including inflated flow lobes and surface pressure ridges. The prominent kilometer-high Vøring Escarpment was developed when landward flowing lava met the ocean, developing an extensive foreset bedded hyaloclastite delta. Later, a pitted surface was developed in the west during lava emplacement in a wet environment during subsidence of the central rift valley. Earliest Eocene sediments were subsequently deposited on the marginal high. Well-defined northeast trending faults are imaged on the marginal high, cutting across the escarpment. Spacing of the faults is ca. 400-500 m, and offsets are typically of ca. 30-50 m, often defining graben structures. The faults further offset the overlying earliest Eocene sequences in a number of examples. Based on the well ties, faulting mainly took place 5-10 m.y. after continental breakup near the Paleocene-Eocene boundary. Our hypothesis is that the faulting is related to strain partitioning across the developing Vøring Transform Margin. Plate tectonic constraints show that there was an active continent-continent transform in this region also for 10-15 m.y. after breakup. The transform margin is a linear, northwest trending structure, with a well-developed transform marginal high, the Mimir High, along its central part. The transform margin extends into the southwestern segment of the Jan Mayen Fracture Zone to the northwest. We speculate that the ocean basin separating the Vøring Spur from the Vøring Marginal High was formed by a rift propagation event during the same time period.
Submarine landslide and tsunami hazards offshore southern Alaska: Seismic strengthening versus rapid sedimentation

NASA Astrophysics Data System (ADS)

Sawyer, Derek E.; Reece, Robert S.; Gulick, Sean P. S.; Lenz, Brandi L.

2017-08-01

The southern Alaskan offshore margin is prone to submarine landslides and tsunami hazards due to seismically active plate boundaries and extreme sedimentation rates from glacially enhanced mountain erosion. We examine the submarine landslide potential with new shear strength measurements acquired by Integrated Ocean Drilling Program Expedition 341 on the continental slope and Surveyor Fan. These data reveal lower than expected sediment strength. Contrary to other active margins where seismic strengthening enhances slope stability, the high-sedimentation margin offshore southern Alaska behaves like a passive margin from a shear strength perspective. We interpret that seismic strengthening occurs but is offset by high sedimentation rates and overpressure. This conclusion is supported by shear strength outside of the fan that follow an active margin trend. More broadly, seismically active margins with wet-based glaciers are susceptible to submarine landslide hazards because of the combination of high sedimentation rates and earthquake shaking.
21 CFR 250.105 - Gelsemium-containing preparations regarded as prescription drugs.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Gelsemium-containing preparations regarded as prescription drugs. 250.105 Section 250.105 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH... prescription drugs. It is the consensus of informed medical opinion that the margin of safety between the...
78 FR 11754 - Approval and Promulgation of Implementation Plans; Tennessee: Knox County Supplement Motor...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... December 18, 2012, (77 FR 74820), EPA proposed to approve through parallel processing Tennessee's October... well as changes to future vehicle mix assumptions, that influence the emission estimations. TDEC has... 2014. \\2\\ A safety margin is the difference between the attainment level of emissions from all source...

Fire Detector

NASA Technical Reports Server (NTRS)

1978-01-01

An early warning fire detection sensor developed for NASA's Space Shuttle Orbiter is being evaluated as a possible hazard prevention system for mining operations. The incipient Fire Detector represents an advancement over commercially available smoke detectors in that it senses and signals the presence of a fire condition before the appearance of flame and smoke, offering an extra margin of safety.
Protect Children Instead of Guns, 2001.

ERIC Educational Resources Information Center

Children's Defense Fund, Washington, DC.

Noting that firearms outnumber children by a margin of almost three to one in the United States, this report advocates gun safety policies to protect children. The report provides information on trends in youth firearm deaths and finds the statistics alarming, despite recent decline. The first of three tables in the report delineates 1979-1999…
Nurturing Care for Young Children under Conditions of Fragility and Conflict

ERIC Educational Resources Information Center

Richter, Linda M.; Lye, Stephen J.; Proulx, Kerrie

2018-01-01

Forced displacement worldwide is at its highest in decades and millions of young children are living in conflict zones, in transitional or enduring refugee contexts, and in demographically diverse marginalized and informal settlements. There is a huge unmet need for delivering early childhood development interventions to ensure the safety and…
78 FR 42809 - Self-Regulatory Organizations; Fixed Income Clearing Corporation; Order Approving Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... remain subject to all of the GSD's normal risk management procedures, which include marking member portfolios to the market on an intraday basis and charging variation margins accordingly.\\19\\ These risk management procedures should help ensure the safety of the securities and funds handled by the GSD in...
77 FR 67679 - Biweekly Notice; Applications and Amendments to Facility Operating Licenses and Combined Licenses...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-13

... diesel generator surveillance requirements. Margin of safety is related to the ability of the fission... surveillance tests, allowing testing in any MODE of operation. The Division 3 AC sources, including the diesel generator (DG) and its associated emergency loads are accident mitigating features, not accident initiators...
Some bivariate distributions for modeling the strength properties of lumber

Treesearch

Richard A. Johnson; James W. Evans; David W. Green

Accurate modeling of the joint stochastic nature of the strength properties of dimension lumber is essential to the determination of reliability-based design safety factors. This report reviews the major techniques for obtaining bivariate distributions and then discusses bivariate distributions whose marginal distributions suggest they might be useful for modeling the...
Cooled Ceramic Matrix Composite Propulsion Structures Demonstrated

NASA Technical Reports Server (NTRS)

Jaskowiak, Martha H.; Dickens, Kevin W.

2005-01-01

NASA's Next Generation Launch Technology (NGLT) Program has successfully demonstrated cooled ceramic matrix composite (CMC) technology in a scramjet engine test. This demonstration represented the world s largest cooled nonmetallic matrix composite panel fabricated for a scramjet engine and the first cooled nonmetallic composite to be tested in a scramjet facility. Lightweight, high-temperature, actively cooled structures have been identified as a key technology for enabling reliable and low-cost space access. Tradeoff studies have shown this to be the case for a variety of launch platforms, including rockets and hypersonic cruise vehicles. Actively cooled carbon and CMC structures may meet high-performance goals at significantly lower weight, while improving safety by operating with a higher margin between the design temperature and material upper-use temperature. Studies have shown that using actively cooled CMCs can reduce the weight of the cooled flow-path component from 4.5 to 1.6 lb/sq ft and the weight of the propulsion system s cooled surface area by more than 50 percent. This weight savings enables advanced concepts, increased payload, and increased range. The ability of the cooled CMC flow-path components to operate over 1000 F hotter than the state-of-the-art metallic concept adds system design flexibility to space-access vehicle concepts. Other potential system-level benefits include smaller fuel pumps, lower part count, lower cost, and increased operating margin.
Medicare Payment Penalties and Safety Net Hospital Profitability: Minimal Impact on These Vulnerable Hospitals.

PubMed

Bazzoli, Gloria J; Thompson, Michael P; Waters, Teresa M

2018-02-08

To examine relationships between penalties assessed by Medicare's Hospital Readmission Reduction Program and Value-Based Purchasing Program and hospital financial condition. Centers for Medicare and Medicaid Services, American Hospital Association, and Area Health Resource File data for 4,824 hospital-year observations. Bivariate and multivariate analysis of pooled cross-sectional data. Safety net hospitals have significantly higher HRRP/VBP penalties, but, unlike nonsafety net hospitals, increases in their penalty rate did not significantly affect their total margins. Safety net hospitals appear to rely on nonpatient care revenues to offset higher penalties for the years studied. While reassuring, these funding streams are volatile and may not be able to compensate for cumulative losses over time. © Health Research and Educational Trust.
Seismic-reflection data on the eastern U.S. continental shelf acquired by M. V. L'OLONNOIS as part of the Atlantic Margin Coring Project (AMCOR) of the U.S. Geological Survey, July-September 1976

USGS Publications Warehouse

Robb, James M.

1980-01-01

In 1976 the U.S. Geological Survey undertook a program to sample the eastern United States Shelf for stratigraphic information by drilling a set of core holes. Results of this Atlantic Margin Coring Program (AMCOR) have been reported by Hathaway and others. Sites were chosen from seismic-reflection data and were reviewed by a safety panel to minimize the risk of penetrating any hydrocarbon accumulation which might lead to environmental contamination.The M-V-L'OLONNOIS, the service ship for the drilling operation, was fitted with seismic-reflection profiling equipment (listed below), to run seismic-reflection profiles before drilling began on each hole. This provided additional assurance that no closed structures would be penetrated and allowed minor adjustment with the site selection. A total of 491 km of high-resolution seismic profiles was collected on 22 sites.Equipment used (specifics for each site noted on records): Bolt Air Guns 1-40 cubic inch chambers EPC Recorder Teledyne Minisparker (last two sites) Navigation used two Internav 101 Loran-C receivers.
Planning study for Merkel cell carcinoma based on the relapse pattern.

PubMed

Hoeller, Ulrike; Schubert, Tina; Mueller, Thomas; Budach, Volker; Ghadjar, Pirus; Brenner, Winfried; Kuschke, Wolf

2017-04-01

To develop a technique for radiation (RT) of in-transit path ways (IT) in Merkel cell carcinoma. In the planning study, IT were ink-marked on the skin during sentinel lymphscintigraphy and wire-marked in planning-CT. Pre- and post-operative planning-CTs were acquired. The clinical target volume (CTV) included tumor bed plus safety margin, IT and draining nodes, the planning volume (PTV) the CTV plus 0.5-1cm margin. VMAT plans with 2-3 arcs were analyzed. A planning study was performed for five pts. including two pts. with primary tumor (PT) in head and neck, 1 pt. each with PT of elbow, forearm and upper leg respectively. Plans showed satisfactory PTV coverage: D mean 100%±0%, D 98% 92.4%±2.24%, homogeneity index (HI) 0.095±0.01, conformation number (CN) 0.84±0.01 and conformality index (CI) 0.95±0.01. The planning study confirms feasibility of highly conformal irradiation of IT pathways based on individualized target delineation. Currently, patients referred for non-metastatic MCC are encouraged to enroll in a prospective clinical study that evaluates the feasibility of radiation of IT pathways. Copyright © 2017 Elsevier B.V. All rights reserved.
Nutraceuticals in the management of osteoarthritis : a critical review.

PubMed

Ragle, Ryan L; Sawitzke, Allen D

2012-09-01

Osteoarthritis (OA) is a chronic, highly prevalent and disabling disease that is expected to increase in prevalence secondary to longer life expectancy and a disproportionately aging population. Treatment of OA is only marginally effective and has been focused primarily on symptom control using weight loss, physical therapy, nonsteroidal anti-inflammatory drugs (NSAIDs), acetaminophen, intra-articular steroids or viscosupplementation, topical NSAIDs and analgesics, diacerein (an oral interleukin-1β inhibitor) and finally joint replacement surgery. The use of nutraceuticals in the treatment of OA is common, and scientific studies examining the effects of nutraceuticals on the pathogenesis and treatment of OA are increasing. This review examines the efficacy and safety of select nutraceuticals for the treatment of OA. The reviewed nutraceuticals include glucosamine, chondroitin, collagen hydrolysates (CHs) and avocado-soybean unsaponifiables (ASUs). There have been several clinical trials examining the efficacy of these products and the results demonstrate significant heterogeneity. Significant improvements in pain, function and structural outcomes have been shown for some of the treatment arms or subgroups of patients, but the effects are not consistent across the studies. Glucosamine, chondroitin and the two in combination have been the most extensively studied. Significant improvement in pain and functional indices and a decrease in the loss of joint space width were demonstrated in some but not all studies. CHs showed significant improvement in pain and functional indices for several subgroups of patients, but these findings were not pervasive amongst the treatment arms. ASU has demonstrated positive results with respect to decreased NSAID use in several studies and functional and pain end points in most of the reviewed studies; however, in the two studies examining structural end points, the results were mixed. The safety of these nutraceuticals has been demonstrated across all of the reviewed trials, and there were no significant issues with tolerance. Given the good safety profile of nutraceuticals, the marginal efficacy of conventional treatments, the high prevalence and rate of disability from OA and the possible benefit of nutraceuticals to patients with OA, use of nutraceuticals in select patients is appropriate. An overall recommendation to use nutraceuticals in the treatment of all patients with OA is not strongly supported by the available data. Future studies should focus on standardization of symptomatic and structural outcome measures, be of longer duration and pay careful attention to the content of the investigational product.
A test of the hydraulic vulnerability segmentation hypothesis in angiosperm and conifer tree species

DOE PAGES

Johnson, Daniel M.; Wortemann, Remi; McCulloh, Katherine A.; ...

2016-05-04

Water transport from soils to the atmosphere is critical for plant growth and survival. However, we have a limited understanding about many portions of the whole-tree hydraulic pathway, because the vast majority of published information is on terminal branches. Our understanding of mature tree trunk hydraulic physiology, in particular, is limited. The hydraulic vulnerability segmentation hypothesis (HVSH) stipulates that distal portions of the plant (leaves, branches and roots) should be more vulnerable to embolism than trunks, which are non-redundant organs that require a massive carbon investment. In the current study, we compared vulnerability to loss of hydraulic function, leaf andmore » xylem water potentials and the resulting hydraulic safety margins (in relation to the water potential causing 50% loss of hydraulic conductivity) in leaves, branches, trunks and roots of four angiosperms and four conifer tree species. Across all species, our results supported strongly the HVSH as leaves and roots were less resistant to embolism than branches or trunks. However, branches were consistently more resistant to embolism than any other portion of the plant, including trunks. Also, calculated whole-tree vulnerability to hydraulic dysfunction was much greater than vulnerability in branches. This was due to hydraulic dysfunction in roots and leaves at less negative water potentials than those causing branch or trunk dysfunction. Leaves and roots had narrow or negative hydraulic safety margins, but trunks and branches maintained positive safety margins. By using branch-based hydraulic information as a proxy for entire plants, much research has potentially overestimated embolism resistance, and possibly drought tolerance, for many species. This study highlights the necessity to reconsider past conclusions made about plant resistance to drought based on branch xylem only. As a result, this study also highlights the necessity for more research of whole-plant hydraulic physiology to better understand strategies of plant drought tolerance and the critical control points within the hydraulic pathway.« less
A test of the hydraulic vulnerability segmentation hypothesis in angiosperm and conifer tree species

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, Daniel M.; Wortemann, Remi; McCulloh, Katherine A.

Water transport from soils to the atmosphere is critical for plant growth and survival. However, we have a limited understanding about many portions of the whole-tree hydraulic pathway, because the vast majority of published information is on terminal branches. Our understanding of mature tree trunk hydraulic physiology, in particular, is limited. The hydraulic vulnerability segmentation hypothesis (HVSH) stipulates that distal portions of the plant (leaves, branches and roots) should be more vulnerable to embolism than trunks, which are non-redundant organs that require a massive carbon investment. In the current study, we compared vulnerability to loss of hydraulic function, leaf andmore » xylem water potentials and the resulting hydraulic safety margins (in relation to the water potential causing 50% loss of hydraulic conductivity) in leaves, branches, trunks and roots of four angiosperms and four conifer tree species. Across all species, our results supported strongly the HVSH as leaves and roots were less resistant to embolism than branches or trunks. However, branches were consistently more resistant to embolism than any other portion of the plant, including trunks. Also, calculated whole-tree vulnerability to hydraulic dysfunction was much greater than vulnerability in branches. This was due to hydraulic dysfunction in roots and leaves at less negative water potentials than those causing branch or trunk dysfunction. Leaves and roots had narrow or negative hydraulic safety margins, but trunks and branches maintained positive safety margins. By using branch-based hydraulic information as a proxy for entire plants, much research has potentially overestimated embolism resistance, and possibly drought tolerance, for many species. This study highlights the necessity to reconsider past conclusions made about plant resistance to drought based on branch xylem only. As a result, this study also highlights the necessity for more research of whole-plant hydraulic physiology to better understand strategies of plant drought tolerance and the critical control points within the hydraulic pathway.« less
NASA's Spaceliner Investment Area Technology Activities

NASA Technical Reports Server (NTRS)

Hueter, Uwe; Lyles, Garry M. (Technical Monitor)

2001-01-01

NASA's has established long term goals for access-to-space. The third generation launch systems are to be fully reusable and operational around 2025. The goals for the third generation launch system are to significantly reduce cost and improve safety over current conditions. The Advanced Space Transportation Program Office (ASTP) at the NASA's Marshall Space Flight Center in Huntsville, AL has the agency lead to develop space transportation technologies. Within ASTP, under the Spaceliner Investment Area, third generation technologies are being pursued in the areas of propulsion, airframes, integrated vehicle health management (IVHM), avionics, power, operations, and range. The ASTP program will mature these technologies through both ground and flight system testing. The Spaceliner Investment Area plans to mature vehicle technologies to reduce the implementation risks for future commercially developed reusable launch vehicles (RLV). The plan is to substantially increase the design and operating margins of the third generation RLV (the Space Shuttle is the first generation) by incorporating advanced technologies in propulsion, materials, structures, thermal protection systems, avionics, and power. Advancements in design tools and better characterization of the operational environment will allow improvements in design margins. Improvements in operational efficiencies will be provided through use of advanced integrated health management, operations, and range technologies. The increase in margins will allow components to operate well below their design points resulting in improved component operating life, reliability, and safety which in turn reduces both maintenance and refurbishment costs. These technologies have the potential of enabling horizontal takeoff by reducing the takeoff weight and achieving the goal of airline-like operation. These factors in conjunction with increased flight rates from an expanding market will result in significant improvements in safety and reductions in operational costs of future vehicles. The paper describes current status, future plans and technologies that are being matured by the Spaceliner Investment Area under the Advanced Space Transportation Program Office.
Parallel computation of multigroup reactivity coefficient using iterative method

NASA Astrophysics Data System (ADS)

Susmikanti, Mike; Dewayatna, Winter

2013-09-01

One of the research activities to support the commercial radioisotope production program is a safety research target irradiation FPM (Fission Product Molybdenum). FPM targets form a tube made of stainless steel in which the nuclear degrees of superimposed high-enriched uranium. FPM irradiation tube is intended to obtain fission. The fission material widely used in the form of kits in the world of nuclear medicine. Irradiation FPM tube reactor core would interfere with performance. One of the disorders comes from changes in flux or reactivity. It is necessary to study a method for calculating safety terrace ongoing configuration changes during the life of the reactor, making the code faster became an absolute necessity. Neutron safety margin for the research reactor can be reused without modification to the calculation of the reactivity of the reactor, so that is an advantage of using perturbation method. The criticality and flux in multigroup diffusion model was calculate at various irradiation positions in some uranium content. This model has a complex computation. Several parallel algorithms with iterative method have been developed for the sparse and big matrix solution. The Black-Red Gauss Seidel Iteration and the power iteration parallel method can be used to solve multigroup diffusion equation system and calculated the criticality and reactivity coeficient. This research was developed code for reactivity calculation which used one of safety analysis with parallel processing. It can be done more quickly and efficiently by utilizing the parallel processing in the multicore computer. This code was applied for the safety limits calculation of irradiated targets FPM with increment Uranium.
Influence of information about specific absorption rate (SAR) upon customers' purchase decisions and safety evaluation of mobile phones.

PubMed

Wiedemann, Peter M; Schütz, Holger; Clauberg, Martin

2008-02-01

This study investigated whether the SAR value is a purchase-relevant characteristic of mobile phones for laypersons and what effect the disclosure of a precautionary SAR value has on laypersons' risk perception. The study consisted of two parts: Study part 1 used a conjoint analysis design to explore the relevance of the SAR value and other features of mobile phones for an intended buying decision. Study part 2 used an experimental, repeated measures design to examine the effect of the magnitude of SAR values and the disclosure of a precautionary SAR value on risk perception. In addition, the study included an analysis of prior concerns of the study participants with regard to mobile phone risks. Part 1 indicates that the SAR value has a high relevance for laypersons' purchase intentions. In the experimental purchase setting it ranks even before price and equipment features. The results of study part 2 show that providing information of a precautionary limit value does not influence risk perception. This result suggests that laypersons' underlying subjective "safety model" for mobile phones resembles more a "margin of safety" concept than a threshold concept. The latter observation holds true no matter how concerned the participants are. (c) 2007 Wiley-Liss, Inc.
Adaptive Flight Control for Aircraft Safety Enhancements

NASA Technical Reports Server (NTRS)

Nguyen, Nhan T.; Gregory, Irene M.; Joshi, Suresh M.

2008-01-01

This poster presents the current adaptive control research being conducted at NASA ARC and LaRC in support of the Integrated Resilient Aircraft Control (IRAC) project. The technique "Approximate Stability Margin Analysis of Hybrid Direct-Indirect Adaptive Control" has been developed at NASA ARC to address the needs for stability margin metrics for adaptive control that potentially enables future V&V of adaptive systems. The technique "Direct Adaptive Control With Unknown Actuator Failures" is developed at NASA LaRC to deal with unknown actuator failures. The technique "Adaptive Control with Adaptive Pilot Element" is being researched at NASA LaRC to investigate the effects of pilot interactions with adaptive flight control that can have implications of stability and performance.
High-temperature oxidation of advanced FeCrNi alloy in steam environments

NASA Astrophysics Data System (ADS)

Elbakhshwan, Mohamed S.; Gill, Simerjeet K.; Rumaiz, Abdul K.; Bai, Jianming; Ghose, Sanjit; Rebak, Raul B.; Ecker, Lynne E.

2017-12-01

Alloys of iron-chromium-nickel are being explored as alternative cladding materials to improve safety margins under severe accident conditions. Our research focuses on non-destructively investigating the oxidation behavior of the FeCrNi alloy "Alloy 33" using synchrotron-based methods. The evolution and structure of oxide layer formed in steam environments were characterized using X-ray diffraction, hard X-ray photoelectron spectroscopy, X-ray fluorescence methods and scanning electron microscopy. Our results demonstrate that a compact and continuous oxide scale was formed consisting of two layers, chromium oxide and spinel phase (FeCr2O4) oxides, wherein the concentration of the FeCr2O4 phase decreased from the surface to the bulk-oxide interface.
[Sociodemographic context of homicide in Mexico City: a spatial analysis].

PubMed

Fuentes Flores, César; Sánchez Salinas, Omar

2015-12-01

Investigate the spatial distribution pattern of the homicide rate and its relation to sociodemographic features in the Benito Juárez, Coyoacán, and Cuauhtémoc districts of Mexico City in 2010. Inferential cross-sectional study that uses spatial analysis methods to study the spatial association of the homicide rate and demographic features. Spatial association was determined through the location quotient, multiple regression analysis, and the use of geographically weighted regression. Homicides show a heterogeneous location pattern with high rates in areas with non-residential land use, low population density, and low marginalization. Spatial analysis tools are powerful instruments for the design of prevention- and recreation-focused public safety policies that aim to reduce mortality from external causes such as homicides.
Down-selection of candidate alloys for further testing of advanced replacement materials for LWR core internals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Was, Gary; Leonard, Keith J.; Tan, Lizhen

Life extension of the existing nuclear reactors imposes irradiation of high fluences to structural materials, resulting in significant challenges to the traditional reactor materials such as type 304 and 316 stainless steels. Advanced alloys with superior radiation resistance will increase safety margins, design flexibility, and economics for not only the life extension of the existing fleet but also new builds with advanced reactor designs. The Electric Power Research Institute (EPRI) teamed up with Department of Energy (DOE) Light Water Reactor Sustainability Program to initiate the Advanced Radiation Resistant Materials (ARRM) program, aiming to identify and develop advanced alloys with superiormore » degradation resistance in light water reactor (LWR)-relevant environments by 2024.« less

Nine steps to risk-informed wellhead protection and management: Methods and application to the Burgberg Catchment

NASA Astrophysics Data System (ADS)

Nowak, W.; Enzenhoefer, R.; Bunk, T.

2013-12-01

Wellhead protection zones are commonly delineated via advective travel time analysis without considering any aspects of model uncertainty. In the past decade, research efforts produced quantifiable risk-based safety margins for protection zones. They are based on well vulnerability criteria (e.g., travel times, exposure times, peak concentrations) cast into a probabilistic setting, i.e., they consider model and parameter uncertainty. Practitioners still refrain from applying these new techniques for mainly three reasons. (1) They fear the possibly cost-intensive additional areal demand of probabilistic safety margins, (2) probabilistic approaches are allegedly complex, not readily available, and consume huge computing resources, and (3) uncertainty bounds are fuzzy, whereas final decisions are binary. The primary goal of this study is to show that these reservations are unjustified. We present a straightforward and computationally affordable framework based on a novel combination of well-known tools (e.g., MODFLOW, PEST, Monte Carlo). This framework provides risk-informed decision support for robust and transparent wellhead delineation under uncertainty. Thus, probabilistic risk-informed wellhead protection is possible with methods readily available for practitioners. As vivid proof of concept, we illustrate our key points on a pumped karstic well catchment, located in Germany. In the case study, we show that reliability levels can be increased by re-allocating the existing delineated area at no increase in delineated area. This is achieved by simply swapping delineated low-risk areas against previously non-delineated high-risk areas. Also, we show that further improvements may often be available at only low additional delineation area. Depending on the context, increases or reductions of delineated area directly translate to costs and benefits, if the land is priced, or if land owners need to be compensated for land use restrictions.
Characterising the individual health risk in infants exposed to organochlorine pesticides via breast milk by applying appropriate margins of safety derived from estimated daily intakes.

PubMed

Hernik, A; Góralczyk, K; Struciński, P; Czaja, K; Korcz, W; Minorczyk, M; Lyczewska, M; Ludwicki, J K

2014-01-01

Milk secretion being an important way of elimination of organochlorine pesticides (OCPs) poses a concern due to potential risk for breastfed infants. This study aims to provide a tool for assessing such risks to infants exposed to OCPs (through accumulation in the mother's body), using calculated individual margins of safety (MoS). Selected OCPs included; p,p'-DDT, p,p'-DDD, p,p'-DDE, β-HCH, γ-HCH and HCB which were analysed in 28 samples of maternal milk. The highest intakes were recorded for p,p'-DDE (at 2.90 μg kg(-1)bw d(-1)) whilst the lowest was for γ-HCH, (at 0.019 μg kg(-1)bwd(-1)). For the risk characterisation purposes MoSs were calculated for the compounds for which toxicological reference values (e.g. ADI, TDI) were adopted. The MoS for average ∑DDT concentrations was found to be relatively low (2.82) somewhat similar to that for HCB at 7.08, and for γ-HCH, the MoS was substantially higher at 263.1. This, however does not take into account the extremely high individual concentrations. Thus, it was decided to calculate estimated daily intake (EDI) values based on OCP levels in individual milk samples. MoS levels of <1 (meaning unacceptable risk) were noted both for HCB in one sample as well as for ∑DDT in 3 samples indicating likely threats to infant's health. The lowest MoS noted for γ-HCH equalled to 60.6, indicating that this compound was not a threat to the health of any of the breastfed infants from the study group. Copyright © 2013. Published by Elsevier Ltd.
Interstitial ultrasound ablation of tumors within or adjacent to bone: Contributions of preferential heating at the bone surface

NASA Astrophysics Data System (ADS)

Scott, Serena J.; Prakash, Punit; Salgaonkar, Vasant; Jones, Peter D.; Cam, Richard N.; Han, Misung; Rieke, Viola; Burdette, E. Clif; Diederich, Chris J.

2013-02-01

Preferential heating of bone due to high ultrasound attenuation may enhance thermal ablation performed with cathetercooled interstitial ultrasound applicators in or near bone. At the same time, thermally and acoustically insulating cortical bone may protect sensitive structures nearby. 3D acoustic and biothermal transient finite element models were developed to simulate temperature and thermal dose distributions during catheter-cooled interstitial ultrasound ablation near bone. Experiments in ex vivo tissues and tissue-mimicking phantoms were performed to validate the models and to quantify the temperature profiles and ablated volumes for various distances between the interstitial applicator and the bone surface. 3D patient-specific models selected to bracket the range of clinical usage were developed to investigate what types of tumors could be treated, applicator configurations, insertion paths, safety margins, and other parameters. Experiments show that preferential heating at the bone surface decreases treatment times compared to when bone is absent and that all tissue between an applicator and bone can be ablated when they are up to 2 cm apart. Simulations indicate that a 5-7 mm safety margin of normal bone is needed to protect (thermal dose < 6 CEM43°C and T < 45°C) sensitive structures behind ablated bone. In 3D patient-specific simulations, tumors 1.0-3.8 cm (L) and 1.3-3.0 cm (D) near or within bone were ablated (thermal dose > 240 CEM43°C) within 10 min without damaging the nearby spinal cord, lungs, esophagus, trachea, or major vasculature. Preferential absorption of ultrasound by bone may provide improved localization, faster treatment times, and larger treatment zones in tumors in and near bone compared to other heating modalities.
The Parable of the Boiled Safety Professional

NASA Technical Reports Server (NTRS)

Shivers, Charles H.

2011-01-01

Common and unique issues contribute to system failures. This paper touches on the concept of drift to failure as a cautionary message. Managers and leaders, design team members, fabricators and assemblers, analysis and assurance personnel, and others associated with operating and maintaining systems, need to pay attention to identify the manifestation of individual and collective behaviors that might indicate slips in rigor or focus or decisions that might eat away at safety margins as our system drifts to failure. Corrections to drift made during design and development phases may efficiently prevent or mitigate drift problems occurring in the operational phase.
New research opportunities for roadside safety barriers improvement

NASA Astrophysics Data System (ADS)

Cantisani, Giuseppe; Di Mascio, Paola; Polidori, Carlo

2017-09-01

Among the major topics regarding the protection of roads, restraint systems still represent a big opportunity in order to increase safety performances. When accidents happen, in fact, the infrastructure can substantially contribute to the reduction of consequences if its marginal spaces are well designed and/or effective restraint systems are installed there. Nevertheless, basic concepts and technology of road safety barriers have not significantly changed for the last two decades. The paper proposes a new approach to the study aimed to define possible enhancements of restraint safety systems performances, by using new materials and defining innovative design principles. In particular, roadside systems can be developed with regard to vehicle-barrier interaction, vehicle-oriented design (included low-mass and extremely low-mass vehicles), traffic suitability, user protection, working width reduction. In addition, thanks to sensors embedded into the barriers, it is also expected to deal with new challenges related to the guidance of automatic vehicles and I2V communication.
Comparisons of Wilks’ and Monte Carlo Methods in Response to the 10CFR50.46(c) Proposed Rulemaking

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Hongbin; Szilard, Ronaldo; Zou, Ling

The Nuclear Regulatory Commission (NRC) is proposing a new rulemaking on emergency core system/loss-of-coolant accident (LOCA) performance analysis. In the proposed rulemaking, designated as 10CFR50.46(c), the US NRC put forward an equivalent cladding oxidation criterion as a function of cladding pre-transient hydrogen content. The proposed rulemaking imposes more restrictive and burnup-dependent cladding embrittlement criteria; consequently nearly all the fuel rods in a reactor core need to be analyzed under LOCA conditions to demonstrate compliance to the safety limits. New analysis methods are required to provide a thorough characterization of the reactor core in order to identify the locations of themore » limiting rods as well as to quantify the safety margins under LOCA conditions. With the new analysis method presented in this work, the limiting transient case and the limiting rods can be easily identified to quantify the safety margins in response to the proposed new rulemaking. In this work, the best-estimate plus uncertainty (BEPU) analysis capability for large break LOCA with the new cladding embrittlement criteria using the RELAP5-3D code is established and demonstrated with a reduced set of uncertainty parameters. Both the direct Monte Carlo method and the Wilks’ nonparametric statistical method can be used to perform uncertainty quantification. Wilks’ method has become the de-facto industry standard to perform uncertainty quantification in BEPU LOCA analyses. Despite its widespread adoption by the industry, the use of small sample sizes to infer statement of compliance to the existing 10CFR50.46 rule, has been a major cause of unrealized operational margin in today’s BEPU methods. Moreover the debate on the proper interpretation of the Wilks’ theorem in the context of safety analyses is not fully resolved yet, even more than two decades after its introduction in the frame of safety analyses in the nuclear industry. This represents both a regulatory and application risk in rolling out new methods. With the 10CFR50.46(c) proposed rulemaking, the deficiencies of the Wilks’ approach are further exacerbated. The direct Monte Carlo approach offers a robust alternative to perform uncertainty quantification within the context of BEPU analyses. In this work, the Monte Carlo method is compared with the Wilks’ method in response to the NRC 10CFR50.46(c) proposed rulemaking.« less
RAVEN User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Rabiti, Cristian; Cogliati, Joshua Joseph

2015-10-01

RAVEN is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. The initial development was aimed to provide dynamic risk analysis capabilities to the Thermo-Hydraulic code RELAP-7, currently under development at the Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose probabilistic and uncertainty quantification platform, capable to agnostically communicate with any system code. This agnosticism includes providing Application Programming Interfaces (APIs). These APIs are used to allow RAVEN to interact with any code as long as all the parameters that need tomore » be perturbed are accessible by inputs files or via python interfaces. RAVEN is capable of investigating the system response, and investigating the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused toward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. The development of RAVEN has started in 2012, when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework became stronger. RAVEN principal assignment is to provide the necessary software and algorithms in order to employ the concept developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just the individuation of the frequency of an event potentially leading to a system failure, but the closeness (or not) to key safety-related events. Hence, the approach is interested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. for an important process such as peak pressure in a pipe) is exceeded under certain conditions. The initial development of RAVEN has been focused on providing dynamic risk assessment capability to RELAP-7, currently under development at the INL and, likely, future replacement of the RELAP5-3D code. Most the capabilities that have been implemented having RELAP-7 as principal focus are easily deployable for other system codes. For this reason, several side activaties are currently ongoing for coupling RAVEN with software such as RELAP5-3D, etc. The aim of this document is the explanation of the input requirements, focalizing on the input structure.« less
RAVEN User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Rabiti, Cristian; Cogliati, Joshua Joseph

2016-02-01

RAVEN is a generic software framework to perform parametric and probabilistic analysis based on the response of complex system codes. The initial development was aimed to provide dynamic risk analysis capabilities to the Thermo-Hydraulic code RELAP-7, currently under development at the Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose probabilistic and uncertainty quantification platform, capable to agnostically communicate with any system code. This agnosticism includes providing Application Programming Interfaces (APIs). These APIs are used to allow RAVEN to interact with any code as long as all the parameters that need tomore » be perturbed are accessible by input files or via python interfaces. RAVEN is capable of investigating the system response, and investigating the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused toward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. The development of RAVEN started in 2012, when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework became stronger. RAVEN principal assignment is to provide the necessary software and algorithms in order to employ the concept developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just the individuation of the frequency of an event potentially leading to a system failure, but the closeness (or not) to key safety-related events. Hence, the approach is interested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. for an important process such as peak pressure in a pipe) is exceeded under certain conditions. The initial development of RAVEN has been focused on providing dynamic risk assessment capability to RELAP-7, currently under development at the INL and, likely, future replacement of the RELAP5-3D code. Most the capabilities that have been implemented having RELAP-7 as principal focus are easily deployable for other system codes. For this reason, several side activates are currently ongoing for coupling RAVEN with software such as RELAP5-3D, etc. The aim of this document is the explanation of the input requirements, focusing on the input structure.« less
RAVEN User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Rabiti, Cristian; Cogliati, Joshua Joseph

2017-03-01

RAVEN is a generic software framework to perform parametric and probabilistic analy- sis based on the response of complex system codes. The initial development was aimed to provide dynamic risk analysis capabilities to the Thermo-Hydraulic code RELAP-7, currently under development at the Idaho National Laboratory (INL). Although the initial goal has been fully accomplished, RAVEN is now a multi-purpose probabilistic and uncer- tainty quantification platform, capable to agnostically communicate with any system code. This agnosticism includes providing Application Programming Interfaces (APIs). These APIs are used to allow RAVEN to interact with any code as long as all the parameters thatmore » need to be perturbed are accessible by inputs files or via python interfaces. RAVEN is capable of investigating the system response, and investigating the input space using Monte Carlo, Grid, or Latin Hyper Cube sampling schemes, but its strength is focused to- ward system feature discovery, such as limit surfaces, separating regions of the input space leading to system failure, using dynamic supervised learning techniques. The development of RAVEN has started in 2012, when, within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program, the need to provide a modern risk evaluation framework became stronger. RAVEN principal assignment is to provide the necessary software and algorithms in order to employ the concept developed by the Risk Informed Safety Margin Characterization (RISMC) program. RISMC is one of the pathways defined within the Light Water Reactor Sustainability (LWRS) program. In the RISMC approach, the goal is not just the individuation of the frequency of an event potentially leading to a system failure, but the closeness (or not) to key safety-related events. Hence, the approach is in- terested in identifying and increasing the safety margins related to those events. A safety margin is a numerical value quantifying the probability that a safety metric (e.g. for an important process such as peak pressure in a pipe) is exceeded under certain conditions. The initial development of RAVEN has been focused on providing dynamic risk assess- ment capability to RELAP-7, currently under develop-ment at the INL and, likely, future replacement of the RELAP5-3D code. Most the capabilities that have been implemented having RELAP-7 as principal focus are easily deployable for other system codes. For this reason, several side activates are currently ongoing for coupling RAVEN with soft- ware such as RELAP5-3D, etc. The aim of this document is the explaination of the input requirements, focalizing on the input structure.« less
Modulation instability in high power laser amplifiers.

PubMed

Rubenchik, Alexander M; Turitsyn, Sergey K; Fedoruk, Michail P

2010-01-18

The modulation instability (MI) is one of the main factors responsible for the degradation of beam quality in high-power laser systems. The so-called B-integral restriction is commonly used as the criteria for MI control in passive optics devices. For amplifiers the adiabatic model, assuming locally the Bespalov-Talanov expression for MI growth, is commonly used to estimate the destructive impact of the instability. We present here the exact solution of MI development in amplifiers. We determine the parameters which control the effect of MI in amplifiers and calculate the MI growth rate as a function of those parameters. The safety range of operational parameters is presented. The results of the exact calculations are compared with the adiabatic model, and the range of validity of the latest is determined. We demonstrate that for practical situations the adiabatic approximation noticeably overestimates MI. The additional margin of laser system design is quantified.
A Stable Polymer Burnable Poison Material With Special Attributes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tulenko, James S.; Baney, Ronald H.; Pressley, Linda

2002-07-01

The University of Florida (UF) is carrying out basic research on a new class of thermally stable boron containing materials which appear to have special properties that will greatly enhance the performance of Burnable Poison Rod Assemblies (BPRA) and also Spent Fuel Containers (SFC). This new material ('Carborane') has the special properties of containing a tailored amount of boron, an extremely high hydrogen content, and being extremely stable to high temperatures. 'Carborane' reduces the water displacement penalty by 59% by the hydrogen present in the 'Carborane'. In addition to increasing safety margins, a cost benefit of approximately $500,000 per two-yearmore » cycle is projected from reduced enrichments, resulting from the use of this burnable poison material, making it no longer necessary to offset the water displacement reactivity penalty. This research program is supported by a Department of Energy NEER grant. (authors)« less
Development and Testing of a High Stability Engine Control (HISTEC) System

NASA Technical Reports Server (NTRS)

Orme, John S.; DeLaat, John C.; Southwick, Robert D.; Gallops, George W.; Doane, Paul M.

1998-01-01

Flight tests were recently completed to demonstrate an inlet-distortion-tolerant engine control system. These flight tests were part of NASA's High Stability Engine Control (HISTEC) program. The objective of the HISTEC program was to design, develop, and flight demonstrate an advanced integrated engine control system that uses measurement-based, real-time estimates of inlet airflow distortion to enhance engine stability. With improved stability and tolerance of inlet airflow distortion, future engine designs may benefit from a reduction in design stall-margin requirements and enhanced reliability, with a corresponding increase in performance and decrease in fuel consumption. This paper describes the HISTEC methodology, presents an aircraft test bed description (including HISTEC-specific modifications) and verification and validation ground tests. Additionally, flight test safety considerations, test plan and technique design and approach, and flight operations are addressed. Some illustrative results are presented to demonstrate the type of analysis and results produced from the flight test program.
Flooding Capability for River-based Scenarios

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L.; Prescott, Steven; Ryan, Emerald

2015-10-01

This report describes the initial investigation into modeling and simulation tools for application of riverine flooding representation as part of the Risk-Informed Safety Margin Characterization (RISMC) Pathway external hazards evaluations. The report provides examples of different flooding conditions and scenarios that could impact river and watershed systems. Both 2D and 3D modeling approaches are described.
The Violence Continuum: Creating a Safe School Climate

ERIC Educational Resources Information Center

Manvell, Elizabeth C.

2012-01-01

We expect schools to be a safe haven, but after more than a decade of targeted school violence prevention laws and safety plans, students are still marginalized and bullied to the point of despondence, retaliation, and even suicide. This thoughtful exploration of what makes a school a safe place is based on the understanding that violence is a…
Moving from the Margins: Culturally Safe Teacher Education in Remote Northwestern British Columbia

ERIC Educational Resources Information Center

Harrison, Edward B.; Lautensach, Alexander K.; McDonald, Verna Lynn

2012-01-01

In 2007 the University of Northern British Columbia initiated a two-year elementary teacher education program at the Northwest Campus in Terrace, British Columbia. The program was designed to meet specific community needs in the North that arise from inequities in the cultural safety of Indigenous teachers and students. The authors share three…
Planning, evaluation and analytical studies in planetary quarantine and spacecraft sterilization

NASA Technical Reports Server (NTRS)

1972-01-01

The technical and analytical support used to aid in developing requirements for planetary quarantine are presented. The investigation was divided into 8 work tasks which are presented in tabular form. Data include methods of sterilization, safety margins for quarantine, revision of contamination logs for Mars and Venus, and estimates of encapsulated and 'free' microbial burden.
Stress analysis of 27% scale model of AH-64 main rotor hub

NASA Technical Reports Server (NTRS)

Hodges, R. V.

1985-01-01

Stress analysis of an AH-64 27% scale model rotor hub was performed. Component loads and stresses were calculated based upon blade root loads and motions. The static and fatigue analysis indicates positive margins of safety in all components checked. Using the format developed here, the hub can be stress checked for future application.
The challenging scales of the bird: Shuttle tile structural integrity

NASA Technical Reports Server (NTRS)

Schneider, W. C.; Miller, G. J.

1985-01-01

The principal design issues, tests, and analyses required to solve the tile integrity problem on the space shuttle orbiters are addressed. Proof testing of installed tiles is discussed along with an airflow test of special tiles. Orbiter windshield tiles are considered in terms of changes necessary to ensure acceptable margins of safety for flight.
Protect Children Instead of Guns, 2000.

ERIC Educational Resources Information Center

Children's Defense Fund, Washington, DC.

Noting that firearms outnumber children by a margin of almost three to one in the United States, this report advocates gun safety policies to protect children. The report provides information on trends in youth firearm deaths from 1994 and 1999 and comparisons of U.S. data to those of other industrialized countries. A table delineates 1996-1998…
Toxicology: Bee P450s Take the Sting out of Cyanoamidine Neonicotinoids.

PubMed

Feyereisen, René

2018-05-07

The neonicotinoid insecticides have raised concerns regarding the health of bee pollinators. New research has identified a P450 enzyme that protects honey bees and bumble bees from the toxicity of two neonicotinoids, thiacloprid and acetamiprid. This P450 enzyme provides a margin of safety to bees. Copyright © 2018 Elsevier Ltd. All rights reserved.

Aviation Weather for Pilots and Flight Operations Personnel.

ERIC Educational Resources Information Center

National Oceanic and Atmospheric Administration (DOC), Rockville, MD. National Weather Service.

The revised Aviation Weather book discusses each aspect of weather as it relates to aircraft operations and flight safety. The book is not an aircraft operating manual and omits all reference to specific weather services. Much of the book has been devoted to marginal, hazardous, and violent weather. It teaches pilots to learn to appreciate good…
Am I Safe Here? LGBTQ Teens and Bullying in Schools

ERIC Educational Resources Information Center

Short, Donn

2017-01-01

"Am I safe here?" LGBTQ students ask this question every day within the school system. This book shines a light on the marginalization and bullying faced by LGBTQ youth, offering a new conceptualization of school safety. Donn Short treats students as the experts on what happens in their schools, giving them a chance to speak for…
Xylem hydraulic safety margins in woody plants: coordination of stomatal control of xylem tension with hydraulic capacitance

Treesearch

Frederick C. Meinzer; Daniel M. Johnson; Barbara Lachenbruch; Katherine A. McCulloh; David R. Woodruff

2009-01-01

The xylem pressure inducing 50% loss of hydraulic conductivity due to embolism (P50) is widely used for comparisons of xylem vulnerability among species and across aridity gradients. However, despite its utility as an index of resistance to catastrophic xylem failure under extreme drought, P50 may have no special...
Reappraisal of the Therapeutic Role of Celecoxib in Cholangiocarcinoma

PubMed Central

Juang, Horng-Heng; S. Pang, Jong-Hwei; Yu, Chung-Shan; Lin, Kun-Ju; Yeh, Ta-Sen; Jan, Yi-Yin

2013-01-01

Cholangiocarcinoma (CCA), a lethal disease, affects many thousands worldwide yearly. Surgical resection provides the best chance for a cure; however, only one-third of CCA patients present with a resectable tumour at the time of diagnosis. Currently, no effective chemotherapy is available for advanced CCA. Cyclooxygenase-2 (COX-2) is a potential oncogene expressing in human CCA tissues and represents a candidate target for treatment; however, COX-2 inhibitors increase the risk of negative cardiovascular events as application for chemoprevention aim. Here, we re-evaluated the effectiveness and safety of celecoxib, one widely used COX-2 inhibitor, in treating CCA. We demonstrated that celecoxib exhibited an anti-proliferative effect on CGCCA cells via cell cycle arrest at G2 phase and apoptosis induction. Treatment for 5 weeks high dose celecoxib (160 mg/kg) significantly repressed thioacetamide-induced CCA tumour growth in rats as monitored by animal positron emission tomography through apoptosis induction. No obviously observable side effects were noted during the therapeutic period. As retrospectively reviewing 78 intrahepatic mass-forming CCA patients, their survival was strongly and negatively associated with a positive resection margin and high COX-2 expression. Based on our result, we concluded that short-term high dose celecoxib may be a promising therapeutic regimen for CCA. Yet its clinical application still needs more studies to prove its safety. PMID:23922859
Submarine Landslide Hazards Offshore Southern Alaska: Seismic Strengthening Versus Rapid Sedimentation

NASA Astrophysics Data System (ADS)

Sawyer, D.; Reece, R.; Gulick, S. P. S.; Lenz, B. L.

2017-12-01

The southern Alaskan offshore margin is prone to submarine landslides and tsunami hazards due to seismically active plate boundaries and extreme sedimentation rates from glacially enhanced mountain erosion. We examine the submarine landslide potential with new shear strength measurements acquired by Integrated Ocean Drilling Program Expedition 341 on the continental slope and Surveyor Fan. These data reveal lower than expected sediment strength. Contrary to other active margins where seismic strengthening enhances slope stability, the high-sedimentation margin offshore southern Alaska behaves like a passive margin from a shear strength perspective. We interpret that seismic strengthening occurs but is offset by high sedimentation rates and overpressure within the slope and Surveyor Fan. This conclusion is supported because shear strength follows an expected active margin profile outside of the fan, where background sedimentation rates occur. More broadly, seismically active margins with wet-based glaciers are susceptible to submarine landslide hazards because of the combination of high sedimentation rates and earthquake shaking
Safety-I, Safety-II and Resilience Engineering.

PubMed

Patterson, Mary; Deutsch, Ellen S

2015-12-01

In the quest to continually improve the health care delivered to patients, it is important to understand "what went wrong," also known as Safety-I, when there are undesired outcomes, but it is also important to understand, and optimize "what went right," also known as Safety-II. The difference between Safety-I and Safety-II are philosophical as well as pragmatic. Improving health care delivery involves understanding that health care delivery is a complex adaptive system; components of that system impact, and are impacted by, the actions of other components of the system. Challenges to optimal care include regular, irregular and unexampled threats. This article addresses the dangers of brittleness and miscalibration, as well as the value of adaptive capacity and margin. These qualities can, respectively, detract from or contribute to the emergence of organizational resilience. Resilience is characterized by the ability to monitor, react, anticipate, and learn. Finally, this article celebrates the importance of humans, who make use of system capabilities and proactively mitigate the effects of system limitations to contribute to successful outcomes. Copyright © 2015 Mosby, Inc. All rights reserved.
The composition and structure of volcanic rifted continental margins in the North Atlantic: Further insight from shear waves

NASA Astrophysics Data System (ADS)

Eccles, Jennifer D.; White, Robert S.; Christie, Philip A. F.

2011-07-01

Imaging challenges caused by highly attenuative flood basalt sequences have resulted in the understanding of volcanic rifted continental margins lagging behind that of non-volcanic rifted and convergent margins. Massive volcanism occurred during break-up at 70% of the passive margins bordering the Atlantic Ocean, the causes and dynamics of which are still debated. This paper shows results from traveltime tomography of compressional and converted shear wave arrivals recorded on 170 four-component ocean bottom seismometers along two North Atlantic continental margin profiles. This traveltime tomography was performed using two different approaches. The first, a flexible layer-based parameterisation, enables the quality control of traveltime picks and investigation of the crustal structure. The second, with a regularised grid-based parameterisation, requires correction of converted shear wave traveltimes to effective symmetric raypaths and allows exploration of the model space via Monte Carlo analyses. The velocity models indicate high lower-crustal velocities and sharp transitions in both velocity and Vp/Vs ratios across the continent-ocean transition. The velocities are consistent with established mixing trends between felsic continental crust and high magnesium mafic rock on both margins. Interpretation of the high quality seismic reflection profile on the Faroes margin confirms that this mixing is through crustal intrusion. Converted shear wave data also provide constraints on the sub-basalt lithology on the Faroes margin, which is interpreted as a pre-break-up Mesozoic to Paleocene sedimentary system intruded by sills.
Fragility Analysis of Concrete Gravity Dams

NASA Astrophysics Data System (ADS)

Tekie, Paulos B.; Ellingwood, Bruce R.

2002-09-01

Concrete gravity dams are an important part ofthe nation's infrastructure. Many dams have been in service for over 50 years, during which time important advances in the methodologies for evaluation of natural phenomena hazards have caused the design-basis events to be revised upwards, in some cases significantly. Many existing dams fail to meet these revised safety criteria and structural rehabilitation to meet newly revised criteria may be costly and difficult. A probabilistic safety analysis (PSA) provides a rational safety assessment and decision-making tool managing the various sources of uncertainty that may impact dam performance. Fragility analysis, which depicts fl%e uncertainty in the safety margin above specified hazard levels, is a fundamental tool in a PSA. This study presents a methodology for developing fragilities of concrete gravity dams to assess their performance against hydrologic and seismic hazards. Models of varying degree of complexity and sophistication were considered and compared. The methodology is illustrated using the Bluestone Dam on the New River in West Virginia, which was designed in the late 1930's. The hydrologic fragilities showed that the Eluestone Dam is unlikely to become unstable at the revised probable maximum flood (PMF), but it is likely that there will be significant cracking at the heel ofthe dam. On the other hand, the seismic fragility analysis indicated that sliding is likely, if the dam were to be subjected to a maximum credible earthquake (MCE). Moreover, there will likely be tensile cracking at the neck of the dam at this level of seismic excitation. Probabilities of relatively severe limit states appear to be only marginally affected by extremely rare events (e.g. the PMF and MCE). Moreover, the risks posed by the extreme floods and earthquakes were not balanced for the Bluestone Dam, with seismic hazard posing a relatively higher risk.
Commercial truck crash injury severity analysis using gradient boosting data mining model.

PubMed

Zheng, Zijian; Lu, Pan; Lantz, Brenda

2018-06-01

Truck crashes contribute to a large number of injuries and fatalities. This study seeks to identify the contributing factors affecting truck crash severity using 2010 to 2016 North Dakota and Colorado crash data provided by the Federal Motor Carrier Safety Administration. To fulfill a gap of previous studies, broad considerations of company and driver characteristics, such as company size and driver's license class, along with vehicle types and crash characteristics are researched. Gradient boosting, a data mining technique, is applied to comprehensively analyze the relationship between crash severities and a set of heterogeneous risk factors. Twenty five variables were tested and 22 of them are identified as significant variables contributing to injury severities, however, top 11 variables account for more than 80% of injury forecasting. The relative variable importance analysis is conducted and furthermore marginal effects of all contributing factors are also illustrated in this research. Several factors such as trucking company attributes (e.g., company size), safety inspection values, trucking company commerce status (e.g., interstate or intrastate), time of day, driver's age, first harmful events, and registration condition are found to be significantly associated with crash injury severity. Even though most of the identified contributing factors are significant for all four levels of crash severity, their relative importance and marginal effect are all different. For the first time, trucking company and driver characteristics are proved to have significant impact on truck crash injury severity. Some of the results in this study reinforce previous studies' conclusions. Findings in this study can be helpful for transportation agencies to reduce injury severity, and develop efficient strategies to improve safety. Copyright © 2018 National Safety Council and Elsevier Ltd. All rights reserved.
Living on the edge: Space use of Eurasian red squirrels in marginal high-elevation habitat

NASA Astrophysics Data System (ADS)

Romeo, Claudia; Wauters, Lucas A.; Preatoni, Damiano; Tosi, Guido; Martinoli, Adriano

2010-11-01

In marginal habitats located at the edge of a species' range, environmental conditions are frequently extreme and individuals may be subject to different selective pressures compared to central populations. These so-called edge or marginal populations tend to have lower densities and reproductive rates than populations located in more suitable habitats, but little is known about local adaptations in spacing behavior. We studied space use and social organization in a population of Eurasian red squirrels ( Sciurus vulgaris) in a high-elevation marginal habitat of dwarf mountain pine ( Pinus mugo) and compared it with spacing patterns in high-quality Scots pine ( Pinus sylvestris) forest at lower-elevation. Home ranges and core areas were larger in the marginal habitat. In both habitats, males used larger home ranges than females, but sex differences in core area size were significant only in the edge population. Patterns of core area overlap were similar in both habitats with intra-sexual territoriality among adult females and higher degrees of inter-sexual overlap, typical for the species throughout its range. However, low densities in the edge population resulted in higher female by males overlap in spring-summer, suggesting males increased home ranges and core areas during mating season to augment access to estrus females. Thus, in the marginal habitat, with low food abundance and low population densities, linked with extreme winter conditions, squirrels, especially males, used large home ranges. Finally, squirrels responded more strongly to variation in food availability (inverse relation between home range size and seed abundance), and even to fluctuations in density (inverse relation between core area size and density of animals of the same sex), in the marginal than in the high-quality habitat, suggesting high behavioral plasticity to respond to the ecological constraints in marginal habitats.
Rational risk-based decision support for drinking water well managers by optimized monitoring designs

NASA Astrophysics Data System (ADS)

Enzenhöfer, R.; Geiges, A.; Nowak, W.

2011-12-01

Advection-based well-head protection zones are commonly used to manage the contamination risk of drinking water wells. Considering the insufficient knowledge about hazards and transport properties within the catchment, current Water Safety Plans recommend that catchment managers and stakeholders know, control and monitor all possible hazards within the catchments and perform rational risk-based decisions. Our goal is to supply catchment managers with the required probabilistic risk information, and to generate tools that allow for optimal and rational allocation of resources between improved monitoring versus extended safety margins and risk mitigation measures. To support risk managers with the indispensable information, we address the epistemic uncertainty of advective-dispersive solute transport and well vulnerability (Enzenhoefer et al., 2011) within a stochastic simulation framework. Our framework can separate between uncertainty of contaminant location and actual dilution of peak concentrations by resolving heterogeneity with high-resolution Monte-Carlo simulation. To keep computational costs low, we solve the reverse temporal moment transport equation. Only in post-processing, we recover the time-dependent solute breakthrough curves and the deduced well vulnerability criteria from temporal moments by non-linear optimization. Our first step towards optimal risk management is optimal positioning of sampling locations and optimal choice of data types to reduce best the epistemic prediction uncertainty for well-head delineation, using the cross-bred Likelihood Uncertainty Estimator (CLUE, Leube et al., 2011) for optimal sampling design. Better monitoring leads to more reliable and realistic protection zones and thus helps catchment managers to better justify smaller, yet conservative safety margins. In order to allow an optimal choice in sampling strategies, we compare the trade-off in monitoring versus the delineation costs by accounting for ill-delineated fractions of protection zones. Within an illustrative simplified 2D synthetic test case, we demonstrate our concept, involving synthetic transmissivity and head measurements for conditioning. We demonstrate the worth of optimally collected data in the context of protection zone delineation by assessing the reduced areal demand of delineated area at user-specified risk acceptance level. Results indicate that, thanks to optimally collected data, risk-aware delineation can be made at low to moderate additional costs compared to conventional delineation strategies.
A cluster randomized non-inferiority field trial on the immunogenicity and safety of tetanus toxoid vaccine kept in controlled temperature chain compared to cold chain.

PubMed

Juan-Giner, Aitana; Domicent, Camille; Langendorf, Céline; Roper, Martha H; Baoundoh, Paul; Fermon, Florence; Gakima, Primitive; Zipursky, Simona; Tamadji, Mbaihol; Grais, Rebecca F

2014-10-29

In resource-poor settings, cold chain requirements present barriers for vaccine delivery. We evaluated the immunogenicity and safety of tetanus toxoid (TT) vaccine in "Controlled Temperature Chain" (CTC; up to 40 °C for <30 days before administration), compared to standard cold chain (SCC; 2-8 °C). Prior to the study, stability parameters of TT-CTC were shown to meet international requirements. A cluster randomized, non-inferiority trial was conducted in Moïssala district, Chad, December 2012-March 2013. Thirty-four included clusters were randomized to CTC or SCC. Women aged 14-49 years, eligible for TT vaccination and with a history of ≤1 TT dose, received two TT doses 4 weeks apart. Participants were blinded to allocation strategy. Tetanus antibody titers were measured using standard ELISA at inclusion and 4 weeks post-TT2. Primary outcome measures were post-vaccination seroconversion and fold-increase in geometric mean concentrations (GMC). Non-inferiority was by seroconversion difference (TTSCC-TTCTC) <5% and ratio of GMCs (TTSCC/TTCTC) <1.5. Adverse events were monitored at health centers and at next contact with participants. A total of 2128 women (CTC=1068; SCC=1060) were recruited. Primary intention to vaccinate analysis included 1830 participants; 272 of these were included in the seroconversion analysis. Seroconversion was reached by >95% of participants; upper 95%CI of the difference was 5.6%. Increases in GMC were over 4-fold; upper 95%CI of GMC ratio was 1.36 in the adjusted analysis. Few adverse events were recorded. This study demonstrates the immunogenicity and safety of TT in CTC at <40 °C for <30 days. The high proportion of participants protected at baseline results in a reduction of power to detect a 5% non-inferiority margin. However, results at a 10% non-inferiority margin, the comparable GMC increases and vaccine's stability demonstrated in the preliminary phase indicate that CTC can be an alternative strategy for TT delivery in situations where cold chain cannot be maintained. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.
Assuring Ground-Based Detect and Avoid for UAS Operations

NASA Technical Reports Server (NTRS)

Denney, Ewen W.; Pai, Ganeshmadhav Jagadeesh; Berthold, Randall; Fladeland, Matthew; Storms, Bruce; Sumich, Mark

2014-01-01

One of the goals of the Marginal Ice Zones Observations and Processes Experiment (MIZOPEX) NASA Earth science mission was to show the operational capabilities of Unmanned Aircraft Systems (UAS) when deployed on challenging missions, in difficult environments. Given the extreme conditions of the Arctic environment where MIZOPEX measurements were required, the mission opted to use a radar to provide a ground-based detect-and-avoid (GBDAA) capability as an alternate means of compliance (AMOC) with the see-and-avoid federal aviation regulation. This paper describes how GBDAA safety assurance was provided by interpreting and applying the guidelines in the national policy for UAS operational approval. In particular, we describe how we formulated the appropriate safety goals, defined the processes and procedures for system safety, identified and assembled the relevant safety verification evidence, and created an operational safety case in compliance with Federal Aviation Administration (FAA) requirements. To the best of our knowledge, the safety case, which was ultimately approved by the FAA, is the first successful example of non-military UAS operations using GBDAA in the U.S. National Airspace System (NAS), and, therefore, the first nonmilitary application of the safety case concept in this context.
Clinical outcome of dedifferentiated liposarcoma in the extremities: A retrospective case series of 7 patients.

PubMed

Kito, Munehisa; Yoshimura, Yasuo; Isobe, Ken'ichi; Aoki, Kaoru; Suzuki, Shuichiro; Tanaka, Atsushi; Okamoto, Masanori; Sano, Kenji; Kato, Hiroyuki

2016-09-01

Wide resection is the generally recommended surgical treatment for dedifferentiated liposarcoma (DDLPS) in the extremities. However, it may be appropriate to distinguish the surgical margin of low-grade atypical lipomatous tumor (ALT)/well-differentiated liposarcoma (WDLPS) area from the high-grade dedifferentiated area, because the low- and high-grade areas can be clearly separated, both radiologically and histologically. This study re-evaluated the details of surgical margin of DDLPS in the extremities, and aimed to investigate the optimal surgical margin and the usefulness of adjuvant therapy for DDLPS in the extremities. Seven patients diagnosed with DDLPS in the extremities and treated between 1995 and 2013 were analyzed. The use of adjuvant therapy before and after surgery was assessed, and the surgical margins for the ALT/WDLPS and dedifferentiated areas were re-evaluated by using the specimens resected at surgery. Subsequently, the recurrence rates, metastatic rates, and oncological outcomes were examined. Four and three patients had wide (adequate wide margin, n = 3; inadequate wide margin, n = 1) and marginal margins for the dedifferentiated area, respectively, while three and four patients had wide (adequate wide margin, n = 2; inadequate wide margin, n = 1) and marginal margins for the ALT/WDLPS area, respectively. Postoperative radiotherapy was performed in three patients with an inadequate wide margin or a marginal margin for the dedifferentiated area. No patient had local recurrence. Distant metastases occurred in two patients. These patients died of their disease. The other five patients were disease-free. The ALT/WDLPS and dedifferentiated areas in the tumor margin may be better to be considered separately in determining the appropriate resection extent for DDLPS in the extremities. Postoperative radiotherapy may provide good local control for cases with a narrow surgical margin. Copyright © 2016 The Japanese Orthopaedic Association. Published by Elsevier B.V. All rights reserved.
High-speed civil transport flight- and propulsion-control technological issues

NASA Technical Reports Server (NTRS)

Ray, J. K.; Carlin, C. M.; Lambregts, A. A.

1992-01-01

Technology advances required in the flight and propulsion control system disciplines to develop a high speed civil transport (HSCT) are identified. The mission and requirements of the transport and major flight and propulsion control technology issues are discussed. Each issue is ranked and, for each issue, a plan for technology readiness is given. Certain features are unique and dominate control system design. These features include the high temperature environment, large flexible aircraft, control-configured empennage, minimizing control margins, and high availability and excellent maintainability. The failure to resolve most high-priority issues can prevent the transport from achieving its goals. The flow-time for hardware may require stimulus, since market forces may be insufficient to ensure timely production. Flight and propulsion control technology will contribute to takeoff gross weight reduction. Similar technology advances are necessary also to ensure flight safety for the transport. The certification basis of the HSCT must be negotiated between airplane manufacturers and government regulators. Efficient, quality design of the transport will require an integrated set of design tools that support the entire engineering design team.
Integrated Advanced Microwave Sounding Unit-A (AMSU-A) METOP Stress Analysis Report (Qual Level Random Vibration) A1 Module

NASA Technical Reports Server (NTRS)

Mehitretter, R.

1996-01-01

Stress analysis of the primary structure of the Meteorological Satellites Project (METSAT) Advanced Microwave Sounding Units-A, A1 Module performed using the Meteorological Operational (METOP) Qualification Level 9.66 grms Random Vibration PSD Spectrum is presented. The random vibration structural margins of safety and natural frequency predictions are summarized.
Airworthiness criteria development for powered-lift aircraft: A program summary

NASA Technical Reports Server (NTRS)

Heffley, R. K.; Stapleford, R. L.; Rumold, R. C.

1977-01-01

A four-year simulation program to develop airworthiness criteria for powered-lift aircraft is summarized. All flight phases affected by use of powered lift (approach, landing, takeoff) are treated with regard to airworthiness problem areas (limiting flight conditions and safety margins: stability, control, and performance; and systems failure). The general features of powered-lift aircraft are compared to conventional aircraft.
Hydraulic patterns and safety margins, from stem to stomata, in three eastern US tree species

Treesearch

D.M. Johnson; K.A. McCulloh; F.C. Meinzer; D.R. Woodruff; D.M. Eissenstat

2011-01-01

Adequate water transport is necessary to prevent stomatal closure and allow for photosynthesis. Dysfunction in the water transport pathway can result in stomatal closure, and can be deleterious to overall plant health and survival. Although much is known about small branch hydraulics, little is known about the coordination of leaf and stem hydraulic function....
Element Load Data Processor (ELDAP) Users Manual

NASA Technical Reports Server (NTRS)

Ramsey, John K., Jr.; Ramsey, John K., Sr.

2015-01-01

Often, the shear and tensile forces and moments are extracted from finite element analyses to be used in off-line calculations for evaluating the integrity of structural connections involving bolts, rivets, and welds. Usually the maximum forces and moments are desired for use in the calculations. In situations where there are numerous structural connections of interest for numerous load cases, the effort in finding the true maximum force and/or moment combinations among all fasteners and welds and load cases becomes difficult. The Element Load Data Processor (ELDAP) software described herein makes this effort manageable. This software eliminates the possibility of overlooking the worst-case forces and moments that could result in erroneous positive margins of safety and/or selecting inconsistent combinations of forces and moments resulting in false negative margins of safety. In addition to forces and moments, any scalar quantity output in a PATRAN report file may be evaluated with this software. This software was originally written to fill an urgent need during the structural analysis of the Ares I-X Interstage segment. As such, this software was coded in a straightforward manner with no effort made to optimize or minimize code or to develop a graphical user interface.
Evaluation of the breakdown behaviour of ATLAS silicon pixel sensors after partial guard-ring removal

NASA Astrophysics Data System (ADS)

Goessling, C.; Klingenberg, R.; Muenstermann, D.; Wittig, T.

2010-12-01

To avoid geometrical inefficiencies in the ATLAS pixel detector, the concept of shingling is used up to now in the barrel section. For the upgrades of ATLAS, it is desired to avoid this as it increases the volume and material budget of the pixel layers and complicates the cooling. A direct planar edge-to-edge arrangement of pixel modules has not been possible in the past due to about 1100 μm of inactive edge composed of approximately 600 μm of guard rings and 500 μm of safety margin. In this work, the safety margin and guard rings of ATLAS SingleChip sensors were cut at different positions using a standard diamond dicing saw and irradiated afterwards to explore the breakdown behaviour and the leakage current development. It is found that the inactive edge can be reduced to about 400 μm of guard rings with almost no reduction in pre-irradiation testability and leakage current performance. This is in particular important for the insertable b-layer upgrade of ATLAS (IBL) where inactive edges of less than 450 μm width are required.

Grip force regulation during pinch grip lifts under somatosensory guidance: comparison between people with stroke and healthy controls.

PubMed

Blennerhassett, Jannette M; Carey, Leeanne M; Matyas, Thomas A

2006-03-01

To compare the timing and grip force application in a pinch grip task performed under somatosensory guidance in stroke and matched controls and to identify characteristics of impaired grip force regulation after stroke. Matched-pairs control group. University research laboratory. Forty-five people with stroke who could pick up a pen lid using a pinch grip and actively participated in rehabilitation and 45 adults without neurologic conditions or musculoskeletal or skin impairments affecting the hand, matched for age, sex, and hand dominance. Not applicable. Timing and magnitude of grip forces applied during pinch grip lift and hold. Prolonged time to grip and lift objects, and excessive grip force prior to commencing the lift occurred in approximately half of the contralesional (involved) hands of people with stroke. Fluctuating irregular forces and reduced adaptation of the grip safety margin were also observed. Excessive safety margins were not predominant after stroke. Extreme slowing and disorganized sequencing of the grip and lifting forces and difficulty maintaining a stable grip characterized severe dysfunction. Delayed grip formulation and variable grip force application are key characteristics of grip dysfunction after stroke.
Pharmacokinetics and safety of imiquimod 5% cream in the treatment of actinic keratoses of the face, scalp, or hands and arms.

PubMed

Harrison, Lester I; Skinner, Shari L; Marbury, Thomas C; Owens, Mary L; Kurup, Sarala; McKane, Scott; Greene, Robert J

2004-06-01

The safety and efficacy of imiquimod 5% cream is being evaluated for the treatment of dysplastic lesions of the epidermis (actinic keratoses, AK). The objective of this clinical study was to describe the pharmacokinetics and safety of topical imiquimod during multiple dosing of AK subjects. A total of 58 adult subjects with 5 to 20 AK lesions at the treatment site applied imiquimod cream three times per week for up to 16 weeks as follows: 12 males and 11 females applied 12.5 mg imiquimod to the face; 11 males applied 25 mg to the entire balding area of the scalp; and 12 males and 12 females applied 75 mg to both hands and forearms. Pharmacokinetics and safety were assessed after the first and last doses, as well as biweekly. Imiquimod and its metabolites were measured in the serum and urine using sensitive liquid chromatography/mass spectrometry methods. Less than 0.6% of the applied doses was recovered in the urine of all subjects. Serum imiquimod levels were low, reflecting minimal dermal absorption, and increased with dose, although not proportionally. Peak levels at the end of dosing were 0.1, 0.2, and 1.6 ng/ml for the face, scalp, and hands/arms groups, respectively. A two- to fourfold accumulation was seen at the end of dosing. Local application site reactions were the most common adverse event, reported by approximately 50% of the subjects in each treatment group. The small number of systemic adverse events, including 'flu-like symptoms, were mostly mild and did not show a dose response. Thus, minimal systemic absorption and good safety margins for topical imiquimod were seen in AK subjects with doses as high as 75 mg three times per week for 16 weeks.
Nuclear criticality safety bounding analysis for the in-tank-precipitation (ITP) process, impacted by fissile isotopic weight fractions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bess, C.E.

The In-Tank Precipitation process (ITP) receives High Level Waste (HLW) supernatant liquid containing radionuclides in waste processing tank 48H. Sodium tetraphenylborate, NaTPB, and monosodium titanate (MST), NaTi{sub 2}O{sub 5}H, are added for removal of radioactive Cs and Sr, respectively. In addition to removal of radio-strontium, MST will also remove plutonium and uranium. The majority of the feed solutions to ITP will come from the dissolution of supernate that had been concentrated by evaporation to a crystallized salt form, commonly referred to as saltcake. The concern for criticality safety arises from the adsorption of U and Pt onto MST. If sufficientmore » mass and optimum conditions are achieved then criticality is credible. The concentration of u and Pt from solution into the smaller volume of precipitate represents a concern for criticality. This report supplements WSRC-TR-93-171, Nuclear Criticality Safety Bounding Analysis For The In-Tank-Precipitation (ITP) Process. Criticality safety in ITP can be analyzed by two bounding conditions: (1) the minimum safe ratio of MST to fissionable material and (2) the maximum fissionable material adsorption capacity of the MST. Calculations have provided the first bounding condition and experimental analysis has established the second. This report combines these conditions with canyon facility data to evaluate the potential for criticality in the ITP process due to the adsorption of the fissionable material from solution. In addition, this report analyzes the potential impact of increased U loading onto MST. Results of this analysis demonstrate a greater safety margin for ITP operations than the previous analysis. This report further demonstrates that the potential for criticality in the ITP process due to adsorption of fissionable material by MST is not credible.« less
Effect of Cements at Different Temperatures on the Clinical Performance and Marginal Adaptation of Inlay-Onlay Restorations In Vivo.

PubMed

Aygün Emiroğlu, Şeyda; Evren, Buket; Kulak Özkan, Yasemin

2016-06-01

To evaluate the clinical performance of inlays and onlays luted with two different resin cements, mixed at different temperatures and to evaluate the marginal adaptation of the restorations. One hundred IPS e.max restorations (82 onlays, 18 inlays; 84 molars, 16 premolars) were placed in 50 patients (28 females, 22 males, mean age, 33 years). The restorations were assigned to six groups according to the luting agent temperature (25°C, 37°C, and 54°C) and cement type (Variolink N high viscosity or G-Cem Automix). All restorations were evaluated after 1 week and 1 year by two examiners using modified USPHS criteria. Replicas of 30 selected onlay restorations (5 per group) were assessed for marginal quality under a scanning electron microscope (SEM) at 200×. Marginal adaptation was quantitatively evaluated in terms of percentage of gap formation, and marginal gap width was measured. After 1 year, the total survival rates of the Variolink N high viscosity group and G-Cem Automix group were 100% and 93.8%, respectively. Three debondings occurred with the G-Cem Automix group, one from each temperature group. For 1-year clinical service time, no significant difference was noticed in the marginal adaptation of Variolink N high viscosity groups and the 37°C G-Cem Automix group, while 25°C and 54°C G-Cem Automix groups' marginal adaptation scores decreased (p < 0.05). Regarding the SEM evaluations, Variolink N high viscosity cement groups showed better marginal adaptation than G-Cem Automix cement groups (p < 0.05). Cementation with the cements preheated to 37°C increased continuous margins in both enamel-cement and cement-ceramic interfaces, but these results were not statistically significant (p > 0.05). Cements at different temperatures did not have significant effects on marginal gap widths of the restorations. The restorations cemented with Variolink N high viscosity cement mixed at the three tested temperatures exhibited better treatment options than the self-adhesive groups. Preheating the self-adhesive cement (G-Cem Automix) to 37°C can be an effective method to have better marginal adaptation than the other self-adhesive groups (25°C, 54°C) tested in this study. © 2015 by the American College of Prosthodontists.
The Application of Margin in Life Theory in Regard to Attrition and Remediation among Emergency Medicine Residents

ERIC Educational Resources Information Center

Kalynych, Colleen J.

2010-01-01

Medical residency is a time of high stress, long hours, high case loads, fatigue, and lack of free time. Burnout rates among residents have been reported to be between 25-76%. Scant literature exists in regard to resident stress and its impact on learning and attrition during residency. The theory of margin posits that a healthy margin is…
Problems and pitfalls in cardiac drug therapy.

PubMed

Stone, S M; Rai, N; Nei, J

2001-01-01

Medical errors in the care of patients may account for 44,000 to 98,000 deaths per year, and 7,000 deaths per year are attributed to medication errors alone. Increasing awareness among health care providers of potential errors is a critical step toward improving the safety of medical care. Because today's medications are increasingly complex, approved at an accelerated rate, and often have a narrow therapeutic window with only a small margin of safety, patient and provider education is critical in assuring optimal therapeutic outcomes. Providers can use electronic resources such as Web sites to keep informed on drug-drug, drug-food, and drug-nutritional supplements interactions.
Read margin analysis of crossbar arrays using the cell-variability-aware simulation method

NASA Astrophysics Data System (ADS)

Sun, Wookyung; Choi, Sujin; Shin, Hyungsoon

2018-02-01

This paper proposes a new concept of read margin analysis of crossbar arrays using cell-variability-aware simulation. The size of the crossbar array should be considered to predict the read margin characteristic of the crossbar array because the read margin depends on the number of word lines and bit lines. However, an excessively high-CPU time is required to simulate large arrays using a commercial circuit simulator. A variability-aware MATLAB simulator that considers independent variability sources is developed to analyze the characteristics of the read margin according to the array size. The developed MATLAB simulator provides an effective method for reducing the simulation time while maintaining the accuracy of the read margin estimation in the crossbar array. The simulation is also highly efficient in analyzing the characteristic of the crossbar memory array considering the statistical variations in the cell characteristics.
Equivalent Treatment and Survival after Resection of Pancreatic Cancer at Safety-Net Hospitals.

PubMed

Dhar, Vikrom K; Hoehn, Richard S; Kim, Young; Xia, Brent T; Jung, Andrew D; Hanseman, Dennis J; Ahmad, Syed A; Shah, Shimul A

2018-01-01

Due to disparities in access to care, patients with Medicaid or no health insurance are at risk of not receiving appropriate adjuvant treatment following resection of pancreatic cancer. We have previously shown inferior short-term outcomes following surgery at safety-net hospitals. Subsequently, we hypothesized that safety-net hospitals caring for these vulnerable populations utilize less adjuvant chemoradiation, resulting in inferior long-term outcomes. The American College of Surgeons National Cancer Data Base was queried for patients diagnosed with pancreatic adenocarcinoma (n = 32,296) from 1998 to 2010. Hospitals were grouped according to safety-net burden, defined as the proportion of patients with Medicaid or no insurance. The highest quartile, representing safety-net hospitals, was compared to lower-burden hospitals with regard to patient demographics, disease characteristics, surgical management, delivery of multimodal systemic therapy, and survival. Patients at safety-net hospitals were less often white, had lower income, and were less educated. Safety-net hospital patients were just as likely to undergo surgical resection (OR 1.03, p = 0.73), achieving similar rates of negative surgical margins when compared to patients at medium and low burden hospitals (70% vs. 73% vs. 66%). Thirty-day mortality rates were 5.6% for high burden hospitals, 5.2% for medium burden hospitals, and 4.3% for low burden hospitals. No clinically significant differences were noted in the proportion of surgical patients receiving either chemotherapy (48% vs. 52% vs. 52%) or radiation therapy (26% vs. 30% vs. 29%) or the time between diagnosis and start of systemic therapy (58 days vs. 61 days vs. 53 days). Across safety-net burden groups, no difference was noted in stage-specific median survival (all p > 0.05) or receipt of adjuvant as opposed to neoadjuvant systemic therapy (82% vs. 85% vs. 85%). Multivariate analysis adjusting for cancer stage revealed no difference in survival for safety-net hospital patients who had surgery and survived > 30 days (HR 1.02, p = 0.63). For patients surviving the perioperative setting following pancreatic cancer surgery, safety-net hospitals achieve equivalent long-term survival outcomes potentially due to equivalent delivery of multimodal therapy at non-safety-net hospitals. Safety-net hospitals are a crucial resource that provides quality long-term cancer treatment for vulnerable populations.
High-temperature explosive development for geothermal well stimulation. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schmidt, E.W.; Mars, J.E.; Wang, C.

1978-03-31

A two-component, temperature-resistant liquid explosive called HITEX has been developed which is capable of withstanding 561/sup 0/K (550/sup 0/F) for 24 hours in a geothermal environment. The explosive is intended for the stimulation of nonproducing or marginally producing geothermal (hot dry rock, vapor-dominated or hydrothermal) reservoirs by fracturing the strata in the vicinity of a borehole. The explosive is inherently safe because it is mixed below ground downhole from two nondetonable liquid components. Development and safety tests included differential scanning calorimetry, thermal stability, minerals compatibility, drop-weight sensitivity, adiabatic compression, electrostatic discharge sensitivity, friction sensitivity, detonation arrest capability, cook-off tests, detonabilitymore » at ambient and elevated pressure, detonation velocity and thin film propagation in a wedge.« less
High-temperature oxidation of advanced FeCrNi alloy in steam environments

DOE PAGES

Elbakhshwan, Mohamed S.; Gill, Simerjeet K.; Rumaiz, Abdul K.; ...

2017-07-04

Alloys of iron-chromium-nickel are being explored as alternative cladding materials to improve safety margins under severe accident conditions. Here, our research focuses on non-destructively investigating the oxidation behavior of the FeCrNi alloy “Alloy 33” using synchrotron-based methods. The evolution and structure of oxide layer formed in steam environments were characterized using X-ray diffraction, hard X-ray photoelectron spectroscopy, X-ray fluorescence methods and scanning electron microscopy. In conclusion, our results demonstrate that a compact and continuous oxide scale was formed consisting of two layers, chromium oxide and spinel phase (FeCr 2O 4) oxides, wherein the concentration of the FeCr 2O 4 phasemore » decreased from the surface to the bulk-oxide interface.« less
Topical 5% 5-fluorouracil in the treatment of multifocal basal cell carcinoma of the face: A novel chemotherapeutic approach.

PubMed

Naik, Mayuresh P; Mehta, Anuj; Abrol, Sangeeta; Kumar, Sandeep; Gupta, Vishnu S

2016-12-01

To determine the safety and efficacy of topical 5-fluorouracil (5-FU) 5% ointment in treatment of non-syndromic multifocal basal cell carcinoma. A 55-year-old male patient, with 8 hours of daily sun exposure, having histologically proven and radiologically non-syndromic, multifocal basal cell carcinoma with involvement of 6 sites on the face, was treated with topical 5-FU 5% ointment twice daily over all sites except the site involving lid margin to prevent corneal toxicity. Left lid lesion underwent wide surgical excision with 5-mm clear margins and reconstruction with nasal septal mucoperichondrium and local skin mobilization. Pharmacologic effects first appeared at 4 weeks and by 8 weeks, the lesions had scabbed and had fallen off with no induration but residual mild perilesional erythema. Patient had post-op histopathological clear margins and recovered uneventfully. No recurrence in 6 months. A topical 5-FU 5% ointment represents a paradigm shift in the treatment of BCC from invasive and disfiguring options (surgery and chemoradiotherapy) to cheap, convenient, effective, non-invasive, non-disfiguring topical chemotherapy. Topical 5% 5-FU is a safe and effective modality of treatment of superficial spreading multifocal basal carcinoma, especially lesions larger than 10 mm, where margins cannot be identified clearly and recurrent lesions.
Safety and Tolerance Evaluation of Milk Fat Globule Membrane-Enriched Infant Formulas: A Randomized Controlled Multicenter Non-Inferiority Trial in Healthy Term Infants

PubMed Central

Billeaud, Claude; Puccio, Giuseppe; Saliba, Elie; Guillois, Bernard; Vaysse, Carole; Pecquet, Sophie; Steenhout, Philippe

2014-01-01

OBJECTIVE This multicenter non-inferiority study evaluated the safety of infant formulas enriched with bovine milk fat globule membrane (MFGM) fractions. METHODS Healthy, full-term infants (n = 119) age ≤14 days were randomized to standard infant formula (control), standard formula enriched with a lipid-rich MFGM fraction (MFGM-L), or standard formula enriched with a protein-rich MFGM fraction (MFGM-P). Primary outcome was mean weight gain per day from enrollment to age 4 months (non-inferiority margin: −3.0 g/day). Secondary (length, head circumference, tolerability, morbidity, adverse events) and exploratory (phospholipids, metabolic markers, immune markers) outcomes were also evaluated. RESULTS Weight gain was non-inferior in the MFGM-L and MFGM-P groups compared with the control group. Among secondary and exploratory outcomes, few between-group differences were observed. Formula tolerance rates were high (>94%) in all groups. Adverse event and morbidity rates were similar across groups except for a higher rate of eczema in the MFGM-P group (13.9% vs control [3.5%], MFGM-L [1.4%]). CONCLUSION Both MFGM-enriched formulas met the primary safety endpoint of non-inferiority in weight gain and were generally well tolerated, although a higher rate of eczema was observed in the MFGM-P group. PMID:25452707
Safety profile and gender specific differences of a methanol extract of Eriosema laurentii (Leguminosae) in acute and subchronic (28 days) oral toxicity studies in Wistar rats.

PubMed

Ateba, Sylvin Benjamin; Simo, Rudy Valdès; Mbanya, Jean Claude; Krenn, Liselotte; Njamen, Dieudonné

2014-03-01

Despite widespread use of Eriosema laurentii De Wild (Leguminosae) in West and Central Africa as herbal medicine and food additive the toxicity of this plant is unknown. Therefore, we performed the safety evaluation of a methanol extract (AEL). In acute toxicity, single oral administration of 2000mg/kg AEL caused neither toxicological symptoms nor mortality and the LD50 was estimated >5000mg/kg. In the subchronic oral toxicity, AEL induced no phenotypical signs of toxicity during and after treatment. Only a delayed decrease of relative spleen weight in males at the highest dose of 400mg/kg occurred. High density lipoprotein (HDL) increased significantly in females at 200 and 400mg/kg. Non-persistent increases in alanine aminotransferase activity within normal ranges were noted at 200mg/kg in males and at all doses in females. In males, AEL induced a decrease of white blood cell count at 400mg/kg, whereas lymphocytes increased at 200 and 400mg/kg and granulocytes at 400mg/kg. In females, no differences in haematological parameters occurred. Neither differences in bilirubin, creatinine and total protein levels were observed nor histological alterations in organs. The results indicate a broad safety margin for AEL. Copyright © 2013 Elsevier Ltd. All rights reserved.
Simple criteria to predict margin involvement after chemoradiotherapy and sphincter-sparing for low rectal cancer.

PubMed

Dumont, F; Tilly, C; Dartigues, P; Goéré, D; Honoré, C; Elias, D

2015-09-01

Low rectal cancers carry a high risk of circumferential margin involvement (CRM+). The anatomy of the lower part of the rectum and a long course of chemoradiotherapy (CRT) limit the accuracy of imaging to predict the CRM+. Additional criteria are required. Eighty six patients undergoing rectal resection with a sphincter-sparing procedure after CRT for low rectal cancer between 2000 and 2013 were retrospectively reviewed. Risk factors of CRM+ and the cut-off number of risk factors required to accurately predict the CRM+ were analyzed. The CRM+ rate was 9.3% and in the multivariate analysis, the significant risk factors were a tumor size exceeding 3 cm, poor response to CRT and a fixed tumor. The best cut-off to predict CRM+ was the presence of 2 risk factors. Patients with 0-1 and 2-3 risk factors had a CRM+ respectively in 1.3% and 50% of cases and a 3-year recurrence rate of 7% and 35% after a median follow-up of 50 months. Poor response, a residual tumor greater than 3 cm and a fixed tumor are predictive of CRM+. Sphincter sparing is an oncological safety procedure for patients with 0-1 criteria but not for patients with 2-3 criteria. Copyright © 2015 Elsevier Ltd. All rights reserved.
Reducing Conservatism in Aircraft Engine Response Using Conditionally Active Min-Max Limit Regulators

NASA Technical Reports Server (NTRS)

May, Ryan D.; Garg, Sanjay

2012-01-01

Current aircraft engine control logic uses a Min-Max control selection structure to prevent the engine from exceeding any safety or operational limits during transients due to throttle commands. This structure is inherently conservative and produces transient responses that are slower than necessary. In order to utilize the existing safety margins more effectively, a modification to this architecture is proposed, referred to as a Conditionally Active (CA) limit regulator. This concept uses the existing Min-Max architecture with the modification that limit regulators are active only when the operating point is close to a particular limit. This paper explores the use of CA limit regulators using a publicly available commercial aircraft engine simulation. The improvement in thrust response while maintaining all necessary safety limits is demonstrated in a number of cases.
Re-appraisal of the Magma-rich versus Magma-poor Paradigm at Rifted Margins: consequences for breakup processes

NASA Astrophysics Data System (ADS)

Tugend, J.; Gillard, M.; Manatschal, G.; Nirrengarten, M.; Harkin, C. J.; Epin, M. E.; Sauter, D.; Autin, J.; Kusznir, N. J.; McDermott, K.

2017-12-01

Rifted margins are often classified based on their magmatic budget only. Magma-rich margins are commonly considered to have excess decompression melting at lithospheric breakup compared with steady state seafloor spreading while magma-poor margins have suppressed melting. New observations derived from high quality geophysical data sets and drill-hole data have revealed the diversity of rifted margin architecture and variable distribution of magmatism. Recent studies suggest, however, that rifted margins have more complex and polyphase tectono-magmatic evolutions than previously assumed and cannot be characterized based on the observed volume of magma alone. We compare the magmatic budget related to lithospheric breakup along two high-resolution long-offset deep reflection seismic profiles across the SE-Indian (magma-poor) and Uruguayan (magma-rich) rifted margins. Resolving the volume of magmatic additions is difficult. Interpretations are non-unique and several of them appear plausible for each case involving variable magmatic volumes and mechanisms to achieve lithospheric breakup. A supposedly 'magma-poor' rifted margin (SE-India) may show a 'magma-rich' lithospheric breakup whereas a 'magma-rich' rifted margin (Uruguay) does not necessarily show excess magmatism at lithospheric breakup compared with steady-state seafloor spreading. This questions the paradigm that rifted margins can be subdivided in either magma-poor or magma-rich margins. The Uruguayan and other magma-rich rifted margins appear characterized by an early onset of decompression melting relative to crustal breakup. For the converse, where the onset of decompression melting is late compared with the timing of crustal breakup, mantle exhumation can occur (e.g. SE-India). Our work highlights the difficulty in determining a magmatic budget at rifted margins based on seismic reflection data alone, showing the limitations of margin classification based solely on magmatic volumes. The timing of decompression melting onset and melting rates (magmatic processes) relative to crustal thinning (tectonic processes) appear equally, if not more important, than the magmatic budget for unravelling the evolution of rifted margins.
Characterization and Modeling of High Power Microwave Effects in CMOS Microelectronics

DTIC Science & Technology

2010-01-01

margin measurement 28 Any voltage above the line marked VIH is considered a valid logic high on the input of the gate. VIH and VIL are defined...can handle any voltage noise level at the input up to VIL without changing state. The region in between VIL and VIH is considered an invalid logic...29 Table 2.2: Intrinsic device characteristics derived from SPETCRE simulations VIH (V) VIL (V) High Noise Margin (V) Low Noise Margin (V
Initial Results from the 2002 Gulf of California Conjugate Margin Seismic Experiment

NASA Astrophysics Data System (ADS)

Holbrook, S.; Lizarralde, D.; Kent, G.; Harding, A.; Fletcher, J.; Gonzalez-Fernandez, A.; Umhoefer, P.; Axen, G.

2003-04-01

The Gulf of California, which marks the ongoing separation of Baja California from mainland Mexico, is one of the few locales where active continental breakup can be studied along unambiguous flow lines that join clear conjugate margin pairs. In Fall 2002, we conducted an onshore-offshore seismic experiment across the conjugate rifted margins of the Gulf of California in several rift segments. The joint U.S.-Mexico project, sponsored principally by the MARGINS program of the U.S. National Science Foundation, aimed to image crustal structure across conjugate margins of four major basins to determine the modes of extension and the influence of sedimentation and magmatism on breakup. Here we present an overview of the experiment, which was substantially altered at sea due to concerns for marine-mammal safety, and present some preliminary findings. Three flow-line transects were acquired, in the Alarcon Basin, the Guaymas Basin, and between Cabo and Tres Marias Islands. In addition, a fourth transect across the Baja Peninsula was acquired. Data acquired included (1) multichannel seismic reflection data using the R/V Ewing’s 20-gun array and 480-channel, 6-km-long streamer, (2) wide-angle reflection/refraction data recorded on ocean-bottom seismometers, from 206 deployments conducted by the R/V New Horizon, and (3) onshore-offshore data recorded on portable seismometers deployed up to 100 km inland on all transects. Initial results from the experiment include (1) clear evidence for asymmetric basement structure on the conjugate rifted margins and across the active mid-ocean spreading center, of the Guaymas Basin, (2) the suggestion of substantial magmatism in an early failed rift of the Alarcon Basin, and (3) active subduction beneath the margin at the Tres Marias islands. In addition, we will discuss new procedures for mitigating effects on marine mammals that may have a significant impact on future U.S.-sponsored seismic reflection activities.
75 FR 66007 - Mark Edward Leyse; Mark Edward Leyse and Raymond Shadis, on Behalf of the New England Coalition...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-27

... cladding temperature in order to provide a necessary margin of safety in the event of a loss-of-coolant... confirming that we have received your comments, contact us directly at 301-415-1677. Hand-deliver comments to...-conservative in their peak cladding temperature limit of 2200 [deg]F, and that the Baker-Just and Cathcart...
Development Program for Field-Repairable/Expendable Main Rotor Blades

DTIC Science & Technology

1976-09-01

honeycomb aft 2, and it represents the most cost- core, and extruded aluminum alloy effective approach to a repairable trailing-edge spline (Reference...materials lend themselves to relatively inexpensive fabrication techniques, the questionable torsional stiffness of composite spars eliminated them...values of the fatigue strength of aluminum , the spline and aft doublers are predicted to have a negative margin of safety for infinite life. The

Retention of stored water enables tropical tree saplings to survive extreme drought conditions.

PubMed

Wolfe, Brett T

2017-04-01

Trees generally maintain a small safety margin between the stem water potential (Ψstem) reached during seasonal droughts and the Ψstem associated with their mortality. This pattern may indicate that species face similar mortality risk during extreme droughts. However, if tree species vary in their ability to regulate Ψstem, then safety margins would poorly predict drought mortality. To explore variation among species in Ψstem regulation, I subjected potted saplings of six tropical tree species to extreme drought and compared their responses with well-watered plants and pretreatment reference plants. In the drought treatment, soil water potential reached <-10 MPa, yet three species, Bursera simaruba (L.) Sarg., Cavanillesia platanifolia (Bonpl.) Kunth and Cedrela odorata L. had 100% survival and maintained Ψstem near -1 MPa (i.e., desiccation-avoiding species). Three other species, Cojoba rufescens (Benth.) Britton and Rose, Genipa americana L. and Hymenaea courbaril L. had 50%, 0% and 25% survival, respectively, and survivors had Ψstem <-6 MPa (i.e., desiccation-susceptible species). The desiccation-avoiding species had lower relative water content (RWC) in all organs and tissues (root, stem, bark and xylem) in the drought treatment than in the reference plants (means 72.0-90.4% vs 86.9-97.9%), but the survivors of the desiccation-susceptible C. rufescens had much lower RWC in the drought treatment (44.5-72.1%). Among the reference plants, the desiccation-avoiding species had lower tissue density, leaf-mass fraction and lateral-root surface area (LRA) than the desiccation-susceptible species. Additionally, C. platanifolia and C. odorata had reduced LRA in the drought treatment, which may slow water loss into dry soil. Together, these results suggest that the ability to regulate Ψstem during extreme drought is associated with functional traits that favor retention of stored water and that safety margins during seasonal drought poorly predict survival during extreme drought. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.
R&D Plan for RISMC Industry Application #1: ECCS/LOCA Cladding Acceptance Criteria

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szilard, Ronaldo Henriques; Zhang, Hongbin; Epiney, Aaron Simon

The Nuclear Regulatory Commission (NRC) is finalizing a rulemaking change that would revise the requirements in 10 CFR 50.46. In the proposed new rulemaking, designated as 10 CFR 50.46c, the NRC proposes a fuel performance-based equivalent cladding reacted (ECR) criterion as a function of cladding hydrogen content before the accident (pre-transient) in order to include the effects of higher burnup on cladding performance as well as to address other technical issues. A loss of operational margin may result due to the more restrictive cladding embrittlement criteria. Initial and future compliance with the rule may significantly increase vendor workload and licenseemore » costs as a spectrum of fuel rod initial burnup states may need to be analyzed to demonstrate compliance. The Idaho National Laboratory (INL) has initiated a project, as part of the DOE Light Water Reactor Sustainability Program (LWRS), to develop analytical capabilities to support the industry in the transition to the new rule. This project is called the Industry Application 1 (IA1) within the Risk-Informed Safety Margin Characterization (RISMC) Pathway of LWRS. The general idea behind the initiative is the development of an Integrated Evaluation Model (IEM). The motivation is to develop a multiphysics framework to analyze how uncertainties are propagated across the stream of physical disciplines and data involved, as well as how risks are evaluated in a LOCA safety analysis as regulated under 10 CFR 50.46c. This IEM is called LOTUS which stands for LOCA Toolkit for US, and it represents the LWRS Program’s response to the proposed new rule making. The focus of this report is to complete an R&D plan to describe the demonstration of the LOCA/ECCS RISMC Industry Application # 1 using the advanced RISMC Toolkit and methodologies. This report includes the description and development plan for a RISMC LOCA tool that fully couples advanced MOOSE tools already in development in order to characterize and optimize plant safety and operational margins. Advanced MOOSE tools that are needed to complete this integrated evaluation model are: RAVEN, RELAP-7, BISON, and MAMMOTH.« less
Dune mobility and aridity at the desert margin of northern China at a time of peak monsoon strength

USGS Publications Warehouse

Mason, J.A.; Lu, H.; Zhou, Y.; Miao, X.; Swinehart, J.B.; Liu, Z.; Goble, R.J.; Yi, S.

2009-01-01

Wind-blown sands were mobile at many sites along the desert margin in northern China during the early Holocene (11.5-8 ka ago), based on extensive new numerical dating. This mobility implies low effective moisture at the desert margin, in contrast to growing evidence for greater than modern monsoon precipitation at the same time in central and southern China. Dry conditions in the early Holocene at the desert margin can be explained through a dynamic link between enhanced diabatic heating in the core region of the strengthened monsoon and increased subsidence in drylands to the north, combined with high evapotranspiration rates due to high summer temperatures. After 8 ka ago, as the monsoon weakened and lower temperatures reduced evapotranspiration, eolian sands were stabilized by vegetation. Aridity and dune mobility at the desert margin and a strengthened monsoon can both be explained as responses to high summer insolation in the early Holocene. ?? 2009 Geological Society of America.
Soil quality impacts of perennial bioenergy crops on marginally-productive lands

USDA-ARS?s Scientific Manuscript database

Dedicated perennial energy crops grown on marginally-productive croplands can provide a sustainable supply of bioenergy feedstock while improving soil quality and enhancing ecosystem services. Because marginally-productive croplands typically are at higher risk of degradation, growing highly produc...
A statistical approach to nuclear fuel design and performance

NASA Astrophysics Data System (ADS)

Cunning, Travis Andrew

As CANDU fuel failures can have significant economic and operational consequences on the Canadian nuclear power industry, it is essential that factors impacting fuel performance are adequately understood. Current industrial practice relies on deterministic safety analysis and the highly conservative "limit of operating envelope" approach, where all parameters are assumed to be at their limits simultaneously. This results in a conservative prediction of event consequences with little consideration given to the high quality and precision of current manufacturing processes. This study employs a novel approach to the prediction of CANDU fuel reliability. Probability distributions are fitted to actual fuel manufacturing datasets provided by Cameco Fuel Manufacturing, Inc. They are used to form input for two industry-standard fuel performance codes: ELESTRES for the steady-state case and ELOCA for the transient case---a hypothesized 80% reactor outlet header break loss of coolant accident. Using a Monte Carlo technique for input generation, 105 independent trials are conducted and probability distributions are fitted to key model output quantities. Comparing model output against recognized industrial acceptance criteria, no fuel failures are predicted for either case. Output distributions are well removed from failure limit values, implying that margin exists in current fuel manufacturing and design. To validate the results and attempt to reduce the simulation burden of the methodology, two dimensional reduction methods are assessed. Using just 36 trials, both methods are able to produce output distributions that agree strongly with those obtained via the brute-force Monte Carlo method, often to a relative discrepancy of less than 0.3% when predicting the first statistical moment, and a relative discrepancy of less than 5% when predicting the second statistical moment. In terms of global sensitivity, pellet density proves to have the greatest impact on fuel performance, with an average sensitivity index of 48.93% on key output quantities. Pellet grain size and dish depth are also significant contributors, at 31.53% and 13.46%, respectively. A traditional limit of operating envelope case is also evaluated. This case produces output values that exceed the maximum values observed during the 105 Monte Carlo trials for all output quantities of interest. In many cases the difference between the predictions of the two methods is very prominent, and the highly conservative nature of the deterministic approach is demonstrated. A reliability analysis of CANDU fuel manufacturing parametric data, specifically pertaining to the quantification of fuel performance margins, has not been conducted previously. Key Words: CANDU, nuclear fuel, Cameco, fuel manufacturing, fuel modelling, fuel performance, fuel reliability, ELESTRES, ELOCA, dimensional reduction methods, global sensitivity analysis, deterministic safety analysis, probabilistic safety analysis.
Clinical trial considerations on male contraception and collection of pregnancy information from female partner: update.

PubMed

Banholzer, Maria Longauer; Wandel, Christoph; Barrow, Paul; Mannino, Marie; Schmitt, Georg; Guérard, Melanie; Müller, Lutz; Greig, Gerard; Amemiya, Kenjie; Peck, Richard; Singer, Thomas; Doessegger, Lucette

2016-12-01

This is an update to our 2012 publication on clinical trial considerations on male contraception and collection of pregnancy information from female partner, after critical review of recent (draft) guidances released by the International Council for Harmonisation [ICH] the Clinical Trial Facilitation Group [CTFG] and the US Food & Drug Administration [FDA]. Relevant aspects of the new guidance documents are discussed in the context of male contraception and pregnancy reporting from female partner in clinical trials and the approach is updated accordingly. Genotoxicity The concept of a threshold is introduced using acceptable daily intake/permissible daily exposure to define genotoxicity requirements, hence highly effective contraception in order to avoid conception. The duration for highly effective contraception has been extended from 74 to 90 days from the end of relevant systemic exposure. Teratogenicity Pharmacokinetic considerations to estimate safety margins have been contextualized with regard to over- and underestimation of the risk of teratogenicity transmitted by a vaginal dose. The duration of male contraception after the last dose takes into account the end of relevant systemic exposure if measured, or a default period of five half-lives after last dose for small molecules and two half-lives for immunoglobulins (mAbs). Measures to prevent exposure of the conceptus via a vaginal dose apply to reproductively competent or vasectomized men, unless measurements fail to detect the compound in seminal fluid. Critical review of new guidance documents provides a comparison across approaches and resulted in an update of our previous publication. Separate algorithms for small molecules and monoclonal antibodies are proposed to guide the recommendations for contraception for male trial participants and pregnancy reporting from female partners. No male contraception is required if the dose is below a defined threshold for genotoxic concern applicable to small molecules. For men treated with teratogenic mAbs, condom use to prevent exposure of a potentially pregnant partner is unlikely to be recommended because of the minimal female exposure anticipated following a vaginal dose. The proposed safety margins for teratogenicity may evolve with further knowledge.
Physically-based landslide assessment for railway infrastructure

NASA Astrophysics Data System (ADS)

Heyerdahl, Håkon; Høydal, Øyvind

2017-04-01

A new high-speed railway line in Eastern Norway passes through areas with Quaternary soil deposits where stability of natural slopes poses considerable challenges. The ground typically consist of thick layers of marine clay deposits, overlain by 8-10 m of silt and sand. Both shallow landslides in the top layers of silt and sand and deep-seated failures in clay must be accounted for. In one section of the railway, the potential for performing stabilizing measures is limited due to existing cultural heritage on top of the slope. Hence, the stability of a steep top section of the slope needs to be evaluated. Assessment of the slope stability for rainfall-triggered slides relies on many parameters. An approach based only on empirical relations will not comply with the design criteria, which only allows deterministic safety margins. From a classic geotechnical approach, the slope would also normally be considered unsafe. However, considerable suction is assumed to exist in the silty and sandy deposits above ground-water level, which will improve the stability. The stabilizing effect however is highly dependent on rainfall, infiltration and soil moisture, and thereby varies continuously. An unsaturated geomechanical approach was taken to assess the slope stability. Soil moisture sensors were installed to monitor changes of in situ water content in the vadose zone. Retention curves for silt/sand specimens samples were measured by pressure plate tests. Some triaxial tests soil strength were performed to check the effect of suction on soil shear strength (performed as drained constant water content tests on compacted specimens). Based on the performed laboratory tests, the unsaturated response of the slope will be modelled numerically and compared with measured soil moisture in situ. Work is still on-going. Initial conditions after respectively dry and wet periods need to be coupled with selected rainfall intensities and duration to see the effect on slope stability. The aim of the work is to reach a result informing the client about the probability of a landslide in the slope, based on expected critical rainfall. A strictly deterministic criterion for minimum safety margin may need to be replaced by scenarios for probability and geometry of potential failures for given return periods and rainfall events.
Presurgical mapping of basal cell carcinoma or squamous cell carcinoma by confocal laser endomicroscopy compared to traditional micrographic surgery: a single-centre prospective feasibility study.

PubMed

Schulz, Alexandra; Daali, Samira; Javed, Mehreen; Fuchs, Paul Christian; Brockmann, Michael; Igressa, Alhadi; Charalampaki, Patra

2016-12-01

At present, no ideal diagnostic tools exist in the market to excise cancer tissue with the required safety margins and to achieve optimal aesthetic results using tissue-conserving techniques. In this prospective study, confocal laser endomicroscopy (CLE) and the traditional gold standard of magnifying glasses (MG) were compared regarding the boundaries of in vivo basal cell carcinoma and squamous cell carcinoma. Tumour diameters defined by both methods were measured and compared with those determined by histopathological examination. Nineteen patients were included in the study. The CLE technique was found to be superior to excisional margins based on MG only. Re-excision was required in 68% of the cases following excision based on MG evaluation, but only in 27% of the cases for whom excision margins were based on CLE. Our results are promising regarding the distinction between tumour and healthy surrounding tissue, and indicate that presurgical mapping of basal cell carcinoma and squamous cell carcinoma is possible. The tool itself should be developed further with special attention to early detection of skin cancer.
Isostatic and dynamic support of high topography on a North Atlantic passive margin

NASA Astrophysics Data System (ADS)

Pedersen, Vivi K.; Huismans, Ritske S.; Moucha, Robert

2016-07-01

Substantial controversy surrounds the origin of high topography along passive continental margins. Here we focus on the well-documented elevated passive margin in southwestern Scandinavia, and quantify the relative contributions of crustal isostasy and dynamic topography in controlling the present topography. We find that majority of the topography is compensated by the crustal structure, suggesting a topographic age that is in accord with the 400 Myr old Caledonian orogenesis. In addition, we propose that dynamic uplift of ∼300 m has rejuvenated existing topography locally in the coastal region over the last 10 Myr. Such uplift, combined with a general sea level fall, can help explain a variety of observations that have traditionally been interpreted in favor of a peneplain uplift model. We conclude that high topography along the Scandinavian margin cannot represent remnants of a peneplain uplifted within the last 20 Myr. The topography must have been high since the Caledonian orogeny.
Highly integrated digital engine control system on an F-15 airplane

NASA Technical Reports Server (NTRS)

Burcham, F. W., Jr.; Haering, E. A., Jr.

1984-01-01

The Highly Integrated Digital Electronic Control (HIDEC) program will demonstrate and evaluate the improvements in performance and mission effectiveness that result from integrated engine/airframe control systems. This system is being used on the F-15 airplane. An integrated flightpath management mode and an integrated adaptive engine stall margin mode are implemented into the system. The adaptive stall margin mode is a highly integrated mode in which the airplane flight conditions, the resulting inlet distortion, and the engine stall margin are continuously computed; the excess stall margin is used to uptrim the engine for more thrust. The integrated flightpath management mode optimizes the flightpath and throttle setting to reach a desired flight condition. The increase in thrust and the improvement in airplane performance is discussed.
Marginalization of girl mothers during reintegration from armed groups in Sierra Leone.

PubMed

Burman, M E; McKay, S

2007-12-01

Although the widespread presence of girls who participate in fighting forces is increasingly recognized, they remain a highly marginalized group globally, receiving little attention either during or after armed conflict. This is especially true for "girl mothers," girls who return to communities with children born while members of fighting forces. The concept of marginalization (Hall et al. 1994) is used to examine what happens to girl soldiers, especially girl mothers, in the aftermath of armed conflict when they seek to reintegrate back into their communities. This analysis, as part of a larger study of reintegration of girl mothers, is based on field work with girls who were in fighting forces in northwest Sierra Leone, especially those who returned with children. The type and level of marginalization these girls experience is consistent with the conceptualization of marginalization; however, they lack voice and experience shame and vulnerability. Moreover, economics were fundamentally related to their marginalization. The girls' access to resources was significantly constrained because the area was heavily impacted by the war and because of widespread poverty throughout Sierra Leone. The findings raise important questions about marginalization of girls affected by war. Girls and girl mothers experience an extremely high level of marginalization; however, some aspects are not consistent with the original conceptualization of marginalization. Theory development in nursing needs to incorporate multiple voices, especially those of the very marginalized and be done in such a manner that benefits and empowers.
Metabolic efficiency in yeast Saccharomyces cerevisiae in relation to temperature dependent growth and biomass yield.

PubMed

Zakhartsev, Maksim; Yang, Xuelian; Reuss, Matthias; Pörtner, Hans Otto

2015-08-01

Canonized view on temperature effects on growth rate of microorganisms is based on assumption of protein denaturation, which is not confirmed experimentally so far. We develop an alternative concept, which is based on view that limits of thermal tolerance are based on imbalance of cellular energy allocation. Therefore, we investigated growth suppression of yeast Saccharomyces cerevisiae in the supraoptimal temperature range (30-40°C), i.e. above optimal temperature (Topt). The maximal specific growth rate (μmax) of biomass, its concentration and yield on glucose (Yx/glc) were measured across the whole thermal window (5-40°C) of the yeast in batch anaerobic growth on glucose. Specific rate of glucose consumption, specific rate of glucose consumption for maintenance (mglc), true biomass yield on glucose (Yx/glc(true)), fractional conservation of substrate carbon in product and ATP yield on glucose (Yatp/glc) were estimated from the experimental data. There was a negative linear relationship between ATP, ADP and AMP concentrations and specific growth rate at any growth conditions, whilst the energy charge was always high (~0.83). There were two temperature regions where mglc differed 12-fold, which points to the existence of a 'low' (within 5-31°C) and a 'high' (within 33-40°C) metabolic mode regarding maintenance requirements. The rise from the low to high mode occurred at 31-32°C in step-wise manner and it was accompanied with onset of suppression of μmax. High mglc at supraoptimal temperatures indicates a significant reduction of scope for growth, due to high maintenance cost. Analysis of temperature dependencies of product formation efficiency and Yatp/glc revealed that the efficiency of energy metabolism approaches its lower limit at 26-31°C. This limit is reflected in the predetermined combination of Yx/glc(true), elemental biomass composition and degree of reduction of the growth substrate. Approaching the limit implies a reduction of the safety margin of metabolic efficiency. We hypothesize that a temperature increase above Topt (e.g. >31°C) triggers both an increment in mglc and suppression of μmax, which together contribute to an upshift of Yatp/glc from the lower limit and thus compensate for the loss of the safety margin. This trade-off allows adding 10 more degrees to Topt and extends the thermal window up to 40°C, sustaining survival and reproduction in supraoptimal temperatures. Deeper understanding of the limits of thermal tolerance can be practically exploited in biotechnological applications. Copyright © 2015 Elsevier Ltd. All rights reserved.
Orion MPCV Touchdown Detection Threshold Development and Testing

NASA Technical Reports Server (NTRS)

Daum, Jared; Gay, Robert

2013-01-01

A robust method of detecting Orion Multi-Purpose Crew Vehicle (MPCV) splashdown is necessary to ensure crew and hardware safety during descent and after touchdown. The proposed method uses a triple redundant system to inhibit Reaction Control System (RCS) thruster firings, detach parachute risers from the vehicle, and transition to the post-landing segment of the Flight Software (FSW). An in-depth trade study was completed to determine optimal characteristics of the touchdown detection method resulting in an algorithm monitoring filtered, lever-arm corrected, 200 Hz Inertial Measurement Unit (IMU) vehicle acceleration magnitude data against a tunable threshold using persistence counter logic. Following the design of the algorithm, high fidelity environment and vehicle simulations, coupled with the actual vehicle FSW, were used to tune the acceleration threshold and persistence counter value to result in adequate performance in detecting touchdown and sufficient safety margin against early detection while descending under parachutes. An analytical approach including Kriging and adaptive sampling allowed for a sufficient number of finite element analysis (FEA) impact simulations to be completed using minimal computation time. The combination of a persistence counter of 10 and an acceleration threshold of approximately 57.3 ft/s2 resulted in an impact performance factor of safety (FOS) of 1.0 and a safety FOS of approximately 2.6 for touchdown declaration. An RCS termination acceleration threshold of approximately 53.1 ft/s(exp)2 with a persistence counter of 10 resulted in an increased impact performance FOS of 1.2 at the expense of a lowered under-parachutes safety factor of 2.2. The resulting tuned algorithm was then tested on data from eight Capsule Parachute Assembly System (CPAS) flight tests, showing an experimental minimum safety FOS of 6.1. The formulated touchdown detection algorithm will be flown on the Orion MPCV FSW during the Exploration Flight Test 1 (EFT-1) mission in the second half of 2014.
Evidence for the hERG Liability of Antihistamines, Antipsychotics, and Anti-Infective Agents: A Systematic Literature Review From the ARITMO Project.

PubMed

Hazell, Lorna; Raschi, Emanuel; De Ponti, Fabrizio; Thomas, Simon H L; Salvo, Francesco; Ahlberg Helgee, Ernst; Boyer, Scott; Sturkenboom, Miriam; Shakir, Saad

2017-05-01

A systematic review was performed to categorize the hERG (human ether-a-go-go-related gene) liability of antihistamines, antipsychotics, and anti-infectives and to compare it with current clinical risk of torsade de pointes (TdP). Eligible studies were hERG assays reporting half-minimal inhibitory concentrations (IC50). A "hERG safety margin" was calculated from the IC50 divided by the peak human plasma concentration (free C max ). A margin below 30 defined hERG liability. Each drug was assigned an "uncertainty score" based on volume, consistency, precision, and internal and external validity of evidence. The hERG liability was compared to existing knowledge on TdP risk (www.credibledrugs.org). Of 1828 studies, 82 were eligible, allowing calculation of safety margins for 61 drugs. Thirty-one drugs (51%) had evidence of hERG liability including 6 with no previous mention of TdP risk (eg, desloratadine, lopinavir). Conversely, 16 drugs (26%) had no evidence of hERG liability including 6 with known, or at least conditional or possible, TdP risk (eg, chlorpromazine, sulpiride). The main sources of uncertainty were the validity of the experimental conditions used (antihistamines and antipsychotics) and nonuse of reference compounds (anti-infectives). In summary, hERG liability was categorized for 3 widely used drug classes, incorporating a qualitative assessment of the strength of available evidence. Some concordance with TdP risk was observed, although several drugs had hERG liability without evidence of clinical risk and vice versa. This may be due to gaps in clinical evidence, limitations of hERG/C max data, or other patient/drug-specific factors that contribute to real-life TdP risk. © 2016, The American College of Clinical Pharmacology.
Accuracy and Consistency of Respiratory Gating in Abdominal Cancer Patients

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ge, Jiajia; Santanam, Lakshmi; Yang, Deshan

2013-03-01

Purpose: To evaluate respiratory gating accuracy and intrafractional consistency for abdominal cancer patients treated with respiratory gated treatment on a regular linear accelerator system. Methods and Materials: Twelve abdominal patients implanted with fiducials were treated with amplitude-based respiratory-gated radiation therapy. On the basis of daily orthogonal fluoroscopy, the operator readjusted the couch position and gating window such that the fiducial was within a setup margin (fiducial-planning target volume [f-PTV]) when RPM indicated “beam-ON.” Fifty-five pre- and post-treatment fluoroscopic movie pairs with synchronized respiratory gating signal were recorded. Fiducial motion traces were extracted from the fluoroscopic movies using a template matchingmore » algorithm and correlated with f-PTV by registering the digitally reconstructed radiographs with the fluoroscopic movies. Treatment was determined to be “accurate” if 50% of the fiducial area stayed within f-PTV while beam-ON. For movie pairs that lost gating accuracy, a MATLAB program was used to assess whether the gating window was optimized, the external-internal correlation (EIC) changed, or the patient moved between movies. A series of safety margins from 0.5 mm to 3 mm was added to f-PTV for reassessing gating accuracy. Results: A decrease in gating accuracy was observed in 44% of movie pairs from daily fluoroscopic movies of 12 abdominal patients. Three main causes for inaccurate gating were identified as change of global EIC over time (∼43%), suboptimal gating setup (∼37%), and imperfect EIC within movie (∼13%). Conclusions: Inconsistent respiratory gating accuracy may occur within 1 treatment session even with a daily adjusted gating window. To improve or maintain gating accuracy during treatment, we suggest using at least a 2.5-mm safety margin to account for gating and setup uncertainties.« less
Safety assessment of plant food supplements (PFS).

PubMed

van den Berg, Suzanne J P L; Serra-Majem, Lluis; Coppens, Patrick; Rietjens, Ivonne M C M

2011-12-01

Botanicals and botanical preparations, including plant food supplements (PFS), are widely used in Western diets. The growing use of PFS is accompanied by an increasing concern because the safety of these PFS is not generally assessed before they enter the market. Regulatory bodies have become more aware of this and are increasing their efforts to ensure the safety of PFS. The present review describes an overview of the general framework for the safety assessment of PFS, focusing on the different approaches currently in use to assess the safety of botanicals and/or botanical compounds, including their history of safe use, the tiered approach proposed by the European Food Safety Authority (EFSA), the Threshold of Toxicological Concern (TTC) and the Margin of Exposure (MOE) concept. Moreover, some examples of botanical compounds in PFS that may be of concern are discussed. Altogether, it is clear that "natural" does not equal "safe" and that PFS may contain compounds of concern at levels far above those found in the regular diet. In addition, the traditional use of a PFS compound as a herb or tea does not guarantee its safety when used as a supplement. This points at a need for stricter regulation and control of botanical containing products, especially given their expanding market volume.
Addendum to NuMI shielding assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vaziri, Kamran; /Fermilab

2007-10-01

The original safety assessment and the Safety Envelope for the NuMI beam line corresponds to 400 kW of beam power. The Main Injector is currently capable of and approved for producing 500 kW of beam power2. However, operation of the NuMI beam line at 400 kW of power brings up the possibility of an occasional excursion above 400 kW due to better than usual tuning in one of the machines upstream of the NuMI beam line. An excursion above the DOE approved Safety Envelope will constitute a safety violation. The purpose of this addendum is to evaluate the radiological issuesmore » and modifications required to operate the NuMI beam line at 500 kW. This upgrade will allow 400 kW operations with a reasonable safety margin. Configuration of the NuMI beam line, boundaries, safety system and the methodologies used for the calculations are as described in the original NuMI SAD. While most of the calculations presented in the original shielding assessment were based on Monte Carlo simulations, which were based on the design geometries, most of the results presented in this addendum are based on the measurements conducted by the AD ES&H radiation safety group.« less
Safety Assessment and Biological Effects of a New Cold Processed SilEmulsion for Dermatological Purpose

PubMed Central

Salgado, Ana; Gonçalves, Lídia; Pinto, Pedro C.; Urbano, Manuela; Ribeiro, Helena M.

2013-01-01

It is of crucial importance to evaluate the safety profile of the ingredients used in dermatological emulsions. A suitable equilibrium between safety and efficacy is a pivotal concern before the marketing of a dermatological product. The aim was to assess the safety and biological effects of a new cold processed silicone-based emulsion (SilEmulsion). The hazard, exposure, and dose-response assessment were used to characterize the risk for each ingredient. EpiSkin assay and human repeat insult patch tests were performed to compare the theoretical safety assessment to in vitro and in vivo data. The efficacy of the SilEmulsion was studied using biophysical measurements in human volunteers during 21 days. According to the safety assessment of the ingredients, 1,5-pentanediol was an ingredient of special concern since its margin of safety was below the threshold of 100 (36.53). EpiSkin assay showed that the tissue viability after the application of the SilEmulsion was 92 ± 6% and, thus considered nonirritant to the skin. The human studies confirmed that the SilEmulsion was not a skin irritant and did not induce any sensitization on the volunteers, being safe for human use. Moreover, biological effects demonstrated that the SilEmulsion increased both the skin hydration and skin surface lipids. PMID:24294598
Safety assessment and biological effects of a new cold processed SilEmulsion for dermatological purpose.

PubMed

Raposo, Sara; Salgado, Ana; Gonçalves, Lídia; Pinto, Pedro C; Urbano, Manuela; Ribeiro, Helena M

2013-01-01

It is of crucial importance to evaluate the safety profile of the ingredients used in dermatological emulsions. A suitable equilibrium between safety and efficacy is a pivotal concern before the marketing of a dermatological product. The aim was to assess the safety and biological effects of a new cold processed silicone-based emulsion (SilEmulsion). The hazard, exposure, and dose-response assessment were used to characterize the risk for each ingredient. EpiSkin assay and human repeat insult patch tests were performed to compare the theoretical safety assessment to in vitro and in vivo data. The efficacy of the SilEmulsion was studied using biophysical measurements in human volunteers during 21 days. According to the safety assessment of the ingredients, 1,5-pentanediol was an ingredient of special concern since its margin of safety was below the threshold of 100 (36.53). EpiSkin assay showed that the tissue viability after the application of the SilEmulsion was 92 ± 6% and, thus considered nonirritant to the skin. The human studies confirmed that the SilEmulsion was not a skin irritant and did not induce any sensitization on the volunteers, being safe for human use. Moreover, biological effects demonstrated that the SilEmulsion increased both the skin hydration and skin surface lipids.
Two-part models with stochastic processes for modelling longitudinal semicontinuous data: Computationally efficient inference and modelling the overall marginal mean.

PubMed

Yiu, Sean; Tom, Brian Dm

2017-01-01

Several researchers have described two-part models with patient-specific stochastic processes for analysing longitudinal semicontinuous data. In theory, such models can offer greater flexibility than the standard two-part model with patient-specific random effects. However, in practice, the high dimensional integrations involved in the marginal likelihood (i.e. integrated over the stochastic processes) significantly complicates model fitting. Thus, non-standard computationally intensive procedures based on simulating the marginal likelihood have so far only been proposed. In this paper, we describe an efficient method of implementation by demonstrating how the high dimensional integrations involved in the marginal likelihood can be computed efficiently. Specifically, by using a property of the multivariate normal distribution and the standard marginal cumulative distribution function identity, we transform the marginal likelihood so that the high dimensional integrations are contained in the cumulative distribution function of a multivariate normal distribution, which can then be efficiently evaluated. Hence, maximum likelihood estimation can be used to obtain parameter estimates and asymptotic standard errors (from the observed information matrix) of model parameters. We describe our proposed efficient implementation procedure for the standard two-part model parameterisation and when it is of interest to directly model the overall marginal mean. The methodology is applied on a psoriatic arthritis data set concerning functional disability.

Comparative sequence stratigraphy of low-latitude versus high-latitude lacustrine rift basins: Seismic data examples from the East African and Baikal rifts

USGS Publications Warehouse

Scholz, C.A.; Moore, T.C.; Hutchinson, D.R.; Golmshtok, A. Ja; Klitgord, Kim D.; Kurotchkin, A.G.

1998-01-01

Lakes Baikal, Malawi and Tanganyika are the world's three largest rift valley lakes and are the classic modem examples of lacustrine rift basins. All the rift lakes are segmented into half-graben basins, and seismic reflection datasets reveal how this segmentation controls the filling of the rift basins through time. In the early stages of rifting, basins are fed primarily by flexural margin and axial margin drainage systems. At the climax of syn-rift sedimentation, however, when the basins are deeply subsided, almost all the margins are walled off by rift shoulder uplifts, and sediment flux into the basins is concentrated at accommodation zone and axial margin river deltas. Flexural margin unconformities are commonplace in the tropical lakes but less so in high-latitude Lake Baikal. Lake levels are extremely dynamic in the tropical lakes and in low-latitude systems in general because of the predominance of evaporation in the hydrologic cycle in those systems. Evaporation is minimized in relation to inflow in the high-latitude Lake Baikal and in most high-latitude systems, and consequently, major sequence boundaries tend to be tectonically controlled in that type of system. The acoustic stratigraphies of the tropical lakes are dominated by high-frequency and high-amplitude lake level shifts, whereas in high-latitude Lake Baikal, stratigraphic cycles are dominated by tectonism and sediment-supply variations.
Study on casing treatment and stator matching on multistage fan

NASA Astrophysics Data System (ADS)

Wu, Chuangliang; Yuan, Wei; Deng, Zhe

2017-10-01

Casing treatments are required for expanding the stall margin of multi-stage high-load turbofans designed with high blade-tip Mach numbers and high leakage flow. In the case of a low mass flow, the casing treatment effectively reduces the blockages caused by the leakage flow and enlarges the stall margin. However, in the case of a high mass flow, the casing treatment affects the overall flow capacity of the fan, the thrust when operating at the high speeds usually required by design-point specifications. Herein, we study a two-stage high-load fan with three-dimensional numerical simulations. We use the simulation results to propose a scheme that enlarges the stall margin of multistage high-load fans without sacrificing the flow capacity when operating with a large mass flow. Furthermore, a circumferential groove casing treatment is used and adjustments are made to the upstream stator angle to match the casing treatment. The stall margin is thus increased to 16.3%, with no reduction in the maximum mass flow rate or the design thrust performance.
The Paget Trial: A Multicenter, Observational Cohort Intervention Study for the Clinical Efficacy, Safety, and Immunological Response of Topical 5% Imiquimod Cream for Vulvar Paget Disease

PubMed Central

Meeuwis, Kim; van Hees, Colette; van Dorst, Eleonora; Bulten, Johan; Bosse, Tjalling; IntHout, Joanna; Boll, Dorry; Slangen, Brigitte; van Seters, Manon; van Beurden, Marc; van Poelgeest, Mariëtte; de Hullu, Joanne

2017-01-01

Background Vulvar Paget disease is a rare skin disorder, which is most common in postmenopausal Caucasian women. They usually present with an erythematous plaque that may show fine or typical “cake icing” scaling or ulceration that may cause itching, pain, irritation, or a burning sensation. Although most cases are noninvasive, vulvar Paget disease may be invasive or associated with an underlying vulvar or distant adenocarcinoma. The histological evidence of so-called “Paget cells” with abundant pale cytoplasm in the epithelium confirms the diagnosis. The origin of these Paget cells is still unclear. Treatment of choice is wide local excision with negative margins. Obtaining clear surgical margins is challenging and may lead to extensive and mutilating surgery. Even then, recurrence rates are high, ranging from 15% to 70%, which emphasizes the need for new treatment options. A number of case reports, retrospective case series, and one observational study have shown promising results using the topical immune response modifier imiquimod. Objective This study aims to investigate the efficacy, safety, and immunological response in patients with noninvasive vulvar Paget disease using a standardized treatment schedule with 5% imiquimod cream. Methods Topical 5% imiquimod cream might be an effective and safe treatment alternative for vulvar Paget disease. The Paget Trial is a multicenter observational cohort study including eight tertiary referral hospitals in the Netherlands. It is ethically approved by the Medical-Ethical Committee of Arnhem-Nijmegen and registered in the Central Committee on Research Involving Human Subjects (CCMO) Register by as NL51648.091.14. Twenty patients with (recurrent) noninvasive vulvar Paget disease will be treated with topical 5% imiquimod cream three times a week for 16 weeks. The primary efficacy outcome is the reduction in lesion size at 12 weeks after end of treatment. Secondary outcomes are safety, immunological response, and quality of life. Safety will be assessed by evaluation of adverse events and tolerability of treatment. To evaluate the immunological response, various immunological markers will be tested on biopsy specimens taken before, during, and after treatment. Quality of life will be assessed with three questionnaires taken before, during, and after treatment. Results First results are expected in the summer of 2018. Trial Registration ClinicalTrials.gov NCT02385188; https://clinicaltrials.gov/ct2/show/NCT02385188 (Archived by WebCite at http://www.webcitation.org/6sXygHuhP). PMID:28877863
Sharing good NEWS across the world: developing comparable scores across 12 countries for the Neighborhood Environment Walkability Scale (NEWS).

PubMed

Cerin, Ester; Conway, Terry L; Cain, Kelli L; Kerr, Jacqueline; De Bourdeaudhuij, Ilse; Owen, Neville; Reis, Rodrigo S; Sarmiento, Olga L; Hinckson, Erica A; Salvo, Deborah; Christiansen, Lars B; Macfarlane, Duncan J; Davey, Rachel; Mitáš, Josef; Aguinaga-Ontoso, Ines; Sallis, James F

2013-04-08

The IPEN (International Physical Activity and Environment Network) Adult project seeks to conduct pooled analyses of associations of perceived neighborhood environment, as measured by the Neighborhood Environment Walkability Scale (NEWS) and its abbreviated version (NEWS-A), with physical activity using data from 12 countries. As IPEN countries used adapted versions of the NEWS/NEWS-A, this paper aimed to develop scoring protocols that maximize cross-country comparability in responses. This information is also highly relevant to non-IPEN studies employing the NEWS/NEWS-A, which is one of the most popular measures of perceived environment globally. The following countries participated in the IPEN Adult study: Australia, Belgium, Brazil, Colombia, Czech Republic, Denmark, Hong Kong, Mexico, New Zealand, Spain, the United Kingdom, and the United States. Participants (N = 14,305) were recruited from neighborhoods varying in walkability and socio-economic status. Countries collected data on the perceived environment using a self- or interviewer-administered version of the NEWS/NEWS-A. Confirmatory Factor Analysis (CFA) was used to derive comparable country-specific measurement models of the NEWS/NEWS-A. The level of correspondence between standard and alternative versions of the NEWS/NEWS-A factor-analyzable subscales was determined by estimating the correlations and mean standardized difference (Cohen's d) between them using data from countries that had included items from both standard and alternative versions of the subscales. Final country-specific measurement models of the NEWS/NEWS-A provided acceptable levels of fit to the data and shared the same factorial structure with six latent factors and two single items. The correspondence between the standard and alternative versions of subscales of Land use mix - access, Infrastructure and safety for walking/cycling, and Aesthetics was high. The Brazilian version of the Traffic safety subscale was highly, while the Australian and Belgian versions were marginally, comparable to the standard version. Single-item versions of the Street connectivity subscale used in Australia and Belgium showed marginally acceptable correspondence to the standard version. We have proposed country-specific modifications to the original scoring protocol of the NEWS/NEWS-A that enhance inter-country comparability. These modifications have yielded sufficiently equivalent measurement models of the NEWS/NEWS-A. Some inter-country discrepancies remain. These need to be considered when interpreting findings from different countries.
Sharing good NEWS across the world: developing comparable scores across 12 countries for the neighborhood environment walkability scale (NEWS)

PubMed Central

2013-01-01

Background The IPEN (International Physical Activity and Environment Network) Adult project seeks to conduct pooled analyses of associations of perceived neighborhood environment, as measured by the Neighborhood Environment Walkability Scale (NEWS) and its abbreviated version (NEWS-A), with physical activity using data from 12 countries. As IPEN countries used adapted versions of the NEWS/NEWS-A, this paper aimed to develop scoring protocols that maximize cross-country comparability in responses. This information is also highly relevant to non-IPEN studies employing the NEWS/NEWS-A, which is one of the most popular measures of perceived environment globally. Methods The following countries participated in the IPEN Adult study: Australia, Belgium, Brazil, Colombia, Czech Republic, Denmark, Hong Kong, Mexico, New Zealand, Spain, the United Kingdom, and the United States. Participants (N = 14,305) were recruited from neighborhoods varying in walkability and socio-economic status. Countries collected data on the perceived environment using a self- or interviewer-administered version of the NEWS/NEWS-A. Confirmatory Factor Analysis (CFA) was used to derive comparable country-specific measurement models of the NEWS/NEWS-A. The level of correspondence between standard and alternative versions of the NEWS/NEWS-A factor-analyzable subscales was determined by estimating the correlations and mean standardized difference (Cohen’s d) between them using data from countries that had included items from both standard and alternative versions of the subscales. Results Final country-specific measurement models of the NEWS/NEWS-A provided acceptable levels of fit to the data and shared the same factorial structure with six latent factors and two single items. The correspondence between the standard and alternative versions of subscales of Land use mix – access, Infrastructure and safety for walking/cycling, and Aesthetics was high. The Brazilian version of the Traffic safety subscale was highly, while the Australian and Belgian versions were marginally, comparable to the standard version. Single-item versions of the Street connectivity subscale used in Australia and Belgium showed marginally acceptable correspondence to the standard version. Conclusions We have proposed country-specific modifications to the original scoring protocol of the NEWS/NEWS-A that enhance inter-country comparability. These modifications have yielded sufficiently equivalent measurement models of the NEWS/NEWS-A. Some inter-country discrepancies remain. These need to be considered when interpreting findings from different countries. PMID:23566032
Raspberry ketone in food supplements--High intake, few toxicity data--A cause for safety concern?

PubMed

Bredsdorff, Lea; Wedebye, Eva Bay; Nikolov, Nikolai Georgiev; Hallas-Møller, Torben; Pilegaard, Kirsten

2015-10-01

Raspberry ketone (4-(4-hydroxyphenyl)-2-butanone) is marketed on the Internet as a food supplement. The recommended intake is between 100 and 1400 mg per day. The substance is naturally occurring in raspberries (up to 4.3 mg/kg) and is used as a flavouring substance. Toxicological studies on raspberry ketone are limited to acute and subchronic studies in rats. When the lowest recommended daily dose of raspberry ketone (100 mg) as a food supplement is consumed, it is 56 times the established threshold of toxicological concern (TTC) of 1800 μg/day for Class 1 substances. The margin of safety (MOS) based on a NOAEL of 280 mg/kg bw/day for lower weight gain in rats is 165 at 100 mg and 12 at 1400 mg. The recommended doses are a concern taking into account the TTC and MOS. Investigations of raspberry ketone in quantitative structure-activity relationship (QSAR) models indicated potential cardiotoxic effects and potential effects on reproduction/development. Taking into account the high intake via supplements, the compound's toxic potential should be clarified with further experimental studies. In UK the pure compound is regarded as novel food requiring authorisation prior to marketing but raspberry ketone is not withdrawn from Internet sites from this country. Copyright © 2015 Elsevier Inc. All rights reserved.
Laparoscopic-Assisted Resection of Colorectal Malignancies

PubMed Central

Chapman, Andrew E.; Levitt, Michael D.; Hewett, Peter; Woods, Rodney; Sheiner, Harry; Maddern, Guy J.

2001-01-01

Objective To compare the safety and efficacy of laparoscopic-assisted resection of colorectal malignancies with open colectomy. Methods Two search strategies were devised to retrieve literature from the Medline, Current Contents, Embase, and Cochrane Library databases until July 1999. Inclusion of papers was determined using a predetermined protocol, independent assessments by two reviewers, and a final consensus decision. English language papers were selected. Acceptable study designs included randomized controlled trials, controlled clinical trials, case series, or case reports. Fifty-two papers met the inclusion criteria. They were tabulated and critically appraised in terms of methodology and design, outcomes, and the possible influence of bias, confounding, and chance. Results Little high-level evidence was available. Laparoscopic resection of colorectal malignancy was more expensive and time-consuming, but little evidence suggests high rates of port site recurrence. The new procedure’s advantages revolve around early recovery from surgery and reduced pain. Conclusions The evidence base for laparoscopic-assisted resection of colorectal malignancies is inadequate to determine the procedure’s safety and efficacy. Because of inadequate evidence detailing circumferential marginal clearance of tumors and the necessity of determining a precise incidence of cardiac and other major complications, along with wound and port site recurrence, it is recommended that a controlled clinical trial, ideally with random allocation to an intervention and control group, be conducted. Long-term survival rates need to be a primary aim of such a trial. PMID:11685021
The Study of the Relationship between Probabilistic Design and Axiomatic Design Methodology. Volume 2

NASA Technical Reports Server (NTRS)

Onwubiko, Chin-Yere; Onyebueke, Landon

1996-01-01

The structural design, or the design of machine elements, has been traditionally based on deterministic design methodology. The deterministic method considers all design parameters to be known with certainty. This methodology is, therefore, inadequate to design complex structures that are subjected to a variety of complex, severe loading conditions. A nonlinear behavior that is dependent on stress, stress rate, temperature, number of load cycles, and time is observed on all components subjected to complex conditions. These complex conditions introduce uncertainties; hence, the actual factor of safety margin remains unknown. In the deterministic methodology, the contingency of failure is discounted; hence, there is a use of a high factor of safety. It may be most useful in situations where the design structures are simple. The probabilistic method is concerned with the probability of non-failure performance of structures or machine elements. It is much more useful in situations where the design is characterized by complex geometry, possibility of catastrophic failure, sensitive loads and material properties. Also included: Comparative Study of the use of AGMA Geometry Factors and Probabilistic Design Methodology in the Design of Compact Spur Gear Set.
RSRM TP-H1148 Main Grain Propellant Crack Initiation Evaluation

NASA Technical Reports Server (NTRS)

Earnest, Todd E.

2005-01-01

Pressurized TP-HI 148 propellant fracture toughness testing was performed to assess the potential for initiation of visually undetectable cracks in the RSRM forward segment transition region during motor ignition. Two separate test specimens were used in this evaluation. Testing was performed in cold-gas and hot-fire environments, and under both static and dynamic pressurization conditions. Analysis of test results demonstrates safety factors against initiation of visually undetectable cracks in excess of 8.0. The Reusable Solid Rocket Motor (RSRM) forward segment is cast with PBAN propellant (TP-HI 148) to form T an 1 1-point star configuration that transitions to a tapered center perforated bore (see Figure 1). The geometry of the transition region between the fin valleys and the bore causes a localized area of high strain during horizontal storage. Updated analyses using worst-case mechanical properties at 40 F and improved modeling techniques indicated a slight reduction in safety margins over previous predictions. Although there is no history of strain induced cracks or flaws in the transition region propellant, a proactive test effort was initiated to better understand the implications of the new analysis, primarily the resistance of TP-H1148 propellant to crack initiation' during RSRM ignition.
Rational Design of Novel 1,3-Oxazine Based β-Secretase (BACE1) Inhibitors: Incorporation of a Double Bond To Reduce P-gp Efflux Leading to Robust Aβ Reduction in the Brain.

PubMed

Fuchino, Kouki; Mitsuoka, Yasunori; Masui, Moriyasu; Kurose, Noriyuki; Yoshida, Shuhei; Komano, Kazuo; Yamamoto, Takahiko; Ogawa, Masayoshi; Unemura, Chie; Hosono, Motoko; Ito, Hisanori; Sakaguchi, Gaku; Ando, Shigeru; Ohnishi, Shuichi; Kido, Yasuto; Fukushima, Tamio; Miyajima, Hirofumi; Hiroyama, Shuichi; Koyabu, Kiyotaka; Dhuyvetter, Deborah; Borghys, Herman; Gijsen, Harrie J M; Yamano, Yoshinori; Iso, Yasuyoshi; Kusakabe, Ken-Ichi

2018-05-23

Accumulation of Aβ peptides is a hallmark of Alzheimer's disease (AD) and is considered a causal factor in the pathogenesis of AD. β-Secretase (BACE1) is a key enzyme responsible for producing Aβ peptides, and thus agents that inhibit BACE1 should be beneficial for disease-modifying treatment of AD. Here we describe the discovery and optimization of novel oxazine-based BACE1 inhibitors by lowering amidine basicity with the incorporation of a double bond to improve brain penetration. Starting from a 1,3-dihydrooxazine lead 6 identified by a hit-to-lead SAR following HTS, we adopted a p K a lowering strategy to reduce the P-gp efflux and the high hERG potential leading to the discovery of 15 that produced significant Aβ reduction with long duration in pharmacodynamic models and exhibited wide safety margins in cardiovascular safety models. This compound improved the brain-to-plasma ratio relative to 6 by reducing P-gp recognition, which was demonstrated by a P-gp knockout mouse model.
[JUSTIFICATION OF USING EQUIVALENCE OF THE INDICES OF QUALITY, SAFETY, AND EFFICACY IN DEVELOPING BIOANALOGS].

PubMed

Niyazov, R R; Goryachev, D V; Gavrishina, E V; Romodanovskii, D P; Dranitsyna, M A

2015-01-01

We describe general principles of demonstrating biosimilarity, as well as selecting the biosimilarity margins. Any change in the structure of a biological molecule can modify its functional activity. Therefore, therapeutic equivalence between a biosimilar product and the corresponding reference product cannot be demonstrated using a single criterion. To demonstrate biosimilarity between two medicinal products, their various characteristics have to be evaluated which may, directly or indirectly, justify that clinically significant differences are absent. Insufficient understanding of 6ritical quality attributes brings a risk for the biosimilar product developer. This will either increase the number of non-clinical and clinical tests and trials needed or will result in awareness that the manufacturing process needs to be improved at the late stages of development, after investing significant resources in the development process. At the same time, the specification of the biological medicinal product cannot solely ensure safety and efficacy thereof. Properly characterized and controlled manufacturing process, which ensures consistency in its attributes not adequately controlled in specifications but influencing safety and efficacy profiles and showing their relevance in non-clinical tests and clinical trials, is an additional quality assurance factor. Justification of all development strategy details, including biosimilarity margins, has to be provided each time when the development process is initiated or when proceeding to the next steps. All problems encountered by the developer have to be resolved in close communication with the regulatory authority. In order to increase the quality of investigation and developer's adherence to good practices, clinical trial results should be published in detail.
Margin of safety for two UV filters estimated by in vitro permeation studies mimicking consumer habits: Effects of skin shaving and sunscreen reapplication.

PubMed

Hojerová, Jarmila; Peráčková, Zuzana; Beránková, Martina

2017-05-01

Sunscreens are intended to work on the skin. To be both efficient and safe, the lowest possible percutaneous permeation of UV filters should occur. The potential for systemic absorption of Benzophenone-3 (BP3, 10%) and Ethylhexyl Triazone (EHT, 5%) in a silicone-based water-in-oil emulsion was assessed in vitro using a full-thickness porcine-ear skin mimicking in-use conditions. The estimated Systemic Exposure Dose (SED) after the sunscreen application at 1.0 mg/cm 2 for 6 h (i) on the face; (ii) on the whole-body skin, was (i) 136 and 30; (ii) 4200 and 933 μg/kg_bw/d for BP3 and EHT, respectively. Reapplication does not mean the double risk; the SED values were only 1.40-1.37-fold greater. Skin shaving increased BP3 and EHT bioavailability 1.38 and 1.80-fold, respectively. Margin of Safety values were estimated according to guidelines applicable for European Union. For three realistic exposure scenarios, MoS of 48, 34 and 34 for BP3 in the sunscreen applied on the whole-body indicate some concerns regarding the safety for consumers (MoS<100). Despite undeniable functional benefits in sunscreens, BP3 concentration allowed in EU cosmetics (max. 10%) should be reviewed, especially in products intended for whole-body applications. The development of new UV filters should be focused on their specific physico-chemical properties. Copyright © 2017 Elsevier Ltd. All rights reserved.
Verification of voltage/frequency requirement for emergency diesel generator in nuclear power plant using dynamic modeling

NASA Astrophysics Data System (ADS)

Hur, Jin-Suk; Roh, Myung-Sub

2014-02-01

One major cause of the plant shutdown is the loss of electrical power. The study is to comprehend the coping action against station blackout including emergency diesel generator, sequential loading of safety system and to ensure that the emergency diesel generator should meet requirements, especially voltage and frequency criteria using modeling tool. This paper also considered the change of the sequencing time and load capacity only for finding electrical design margin. However, the revision of load list must be verified with safety analysis. From this study, it is discovered that new load calculation is a key factor in EDG localization and in-house capability increase.
[Economic analysis versus the principle of guaranteed safety in blood transfusion].

PubMed

Moatti, J P; Loubière, S; Rotily, M

2000-06-01

This article shows that policies aimed at reducing risks of infectious agents transmissible through blood unfortunately follow a law of 'diminishing returns': increasing marginal costs have to be devoted for limited reductions in the risks of contamination through blood donations. Therefore, the economic cost-effectiveness analysis is appropriate to identify screening strategies which may minimize costs to reach a certain level of safety. Moreover, economic analysis can contribute to public debates about the level of residual risk that society is willing to accept. Empirical results from French studies about screening for hepatitis C virus (HCV) in individuals who have received blood transfusions and in blood donations are presented to illustrate these points.
Spectrally Encoded Confocal Microscopy (SECM) for Diagnosing of Breast Cancer in Excision and Margin Specimens

PubMed Central

Brachtel, Elena F.; Johnson, Nicole B.; Huck, Amelia E.; Rice-Stitt, Travis L.; Vangel, Mark G.; Smith, Barbara L.; Tearney, Guillermo J.; Kang, Dongkyun

2016-01-01

A large percentage of breast cancer patients treated with breast conserving surgery need to undergo multiple surgeries due to positive margins found during post-operative margin assessment. Carcinomas could be removed completely during the initial surgery and additional surgery avoided if positive margins can be determined intra-operatively. Spectrally-encoded confocal microscopy (SECM) is a high-speed reflectance confocal microscopy technology that has a potential to rapidly image the entire surgical margin at sub-cellular resolution and accurately determine margin status intra-operatively. In this paper, in order to test feasibility of using SECM for intra-operative margin assessment, we have evaluated the diagnostic accuracy of SECM for detecting various types of breast cancers. Forty-six surgically-removed breast specimens were imaged with a SECM system. Side-by-side comparison between SECM and histologic images showed that SECM images can visualize key histomorphologic patterns of normal/benign and malignant breast tissues. Small (500 µm × 500 µm) spatially-registered SECM and histologic images (n=124 for each) were diagnosed independently by three pathologists with expertise in breast pathology. Diagnostic accuracy of SECM for determining malignant tissues was high, average sensitivity of 0.91, specificity of 0.93, positive predictive value of 0.95, and negative predictive value of 0.87. Intra-observer agreement and inter-observer agreement for SECM were also high, 0.87 and 0.84, respectively. Results from this study suggest that SECM may be developed into an intra-operative margin assessment tool for guiding breast cancer excisions. PMID:26779830
Helping Students on the Margin Succeed in Schools.

ERIC Educational Resources Information Center

Langenfeld, Michelle Schoen; Cumming, Brenda

1996-01-01

Addresses how Apple Valley High School (Minnesota) has been able to help marginal students succeed in school. The fundamental actions that contributed to the effectiveness of study-team efforts to help marginal students are discussed, and what has been learned through these efforts is considered. (GR)
Combination of post-operative radiotherapy and cetuximab for high-risk cutaneous squamous cell cancer of the head and neck: A propensity score analysis.

PubMed

Palmer, Joshua D; Schneider, Charles J; Hockstein, Neil; Hanlon, Alexandra L; Silberg, Jordan; Strasser, Jon; Mauer, Elizabeth A; Dzeda, Michael; Witt, Robert; Raben, Adam

2018-03-01

The objective of this study was to investigate the safety, tolerability and preliminary efficacy of radiotherapy plus cetuximab in high risk CSCC patients. Patients with high-risk CSCC diagnosed between 2006 and 2013 were analyzed. Patients were divided into two groups: radiotherapy alone versus radiotherapy plus cetuximab. Among 68 patients meeting study criteria, we identified 29 treated with cetuximab plus RT and 39 with RT alone. Primary analysis examined disease-free and overall survival, freedom from local and distant recurrence in the propensity score matched cohort. Propensity score analysis was performed with weighted factors including: Charlson Comorbidity Index score, age. KPS, primary location, T and N stage, recurrent status, margin status, LVSI, PNI and grade. Toxicity was assessed using the CTCAE v4.0. Median follow-up for living patients was 30 months. Patients in the cetuximab group were more likely to have advanced N stage, positive margins and recurrent disease. After propensity score matching the groups were well balanced. Six patients experienced ≥ grade 3 acute toxicity in the cetuximab group. The 1-year, 2-year and 5-year progression free survival (PFS) for patients in the cetuximab group were 86%, 72% and 66%, respectively. The 1-year, 2-year and 5-year overall survival (OS) for patients in the cetuximab group was 98%, 80% and 80%, respectively. Although limited by small numbers, the combination of cetuximab and radiotherapy in CSCC appears well tolerated there were more long-term survivors and less distant metastasis in the cetuximab group. These promising finding warrant further studies. Copyright © 2018 Elsevier Ltd. All rights reserved.
Rectal cancer staging: focus on the prognostic significance of the findings described by high-resolution magnetic resonance imaging

PubMed Central

2013-01-01

Abstract High-resolution (HR) magnetic resonance imaging (MRI) has become an indispensable tool for multidisciplinary teams (MDTs) addressing rectal cancer. It provides anatomic information for surgical planning and allows patients to be stratified into different groups according to the risk of local and distant recurrence. One of the objectives of the MDT is the preoperative identification of high-risk patients who will benefit from neoadjuvant treatment. For this reason, the correct evaluation of the circumferential resection margin (CRM), the depth of tumor spread beyond the muscularis propria, extramural vascular invasion and nodal status is of the utmost importance. Low rectal tumors represent a special challenge for the MDT, because decisions seek a balance between oncologic safety, in the pursuit of free resection margins, and the patient’s quality of life, in order to preserve sphincter function. At present, the exchange of information between the different specialties involved in dealing with patients with rectal cancer can rank the contribution of colleagues, auditing their work and incorporating knowledge that will lead to a better understanding of the pathology. Thus, beyond the anatomic description of the images, the radiologist’s role in the MDT makes it necessary to know the prognostic value of the findings that we describe, in terms of recurrence and survival, because these findings affect decision making and, therefore, the patients’ life. In this review, the usefulness of HR MRI in the initial staging of rectal cancer and in the evaluation of neoadjuvant treatment, with a focus on the prognostic value of the findings, is described as well as the contribution of HR MRI in assessing patients with suspected or confirmed recurrence of rectal cancer. PMID:23876415
Rectal cancer staging: focus on the prognostic significance of the findings described by high-resolution magnetic resonance imaging.

PubMed

Dieguez, Adriana

2013-07-22

High-resolution (HR) magnetic resonance imaging (MRI) has become an indispensable tool for multidisciplinary teams (MDTs) addressing rectal cancer. It provides anatomic information for surgical planning and allows patients to be stratified into different groups according to the risk of local and distant recurrence. One of the objectives of the MDT is the preoperative identification of high-risk patients who will benefit from neoadjuvant treatment. For this reason, the correct evaluation of the circumferential resection margin (CRM), the depth of tumor spread beyond the muscularis propria, extramural vascular invasion and nodal status is of the utmost importance. Low rectal tumors represent a special challenge for the MDT, because decisions seek a balance between oncologic safety, in the pursuit of free resection margins, and the patient's quality of life, in order to preserve sphincter function. At present, the exchange of information between the different specialties involved in dealing with patients with rectal cancer can rank the contribution of colleagues, auditing their work and incorporating knowledge that will lead to a better understanding of the pathology. Thus, beyond the anatomic description of the images, the radiologist's role in the MDT makes it necessary to know the prognostic value of the findings that we describe, in terms of recurrence and survival, because these findings affect decision making and, therefore, the patients' life. In this review, the usefulness of HR MRI in the initial staging of rectal cancer and in the evaluation of neoadjuvant treatment, with a focus on the prognostic value of the findings, is described as well as the contribution of HR MRI in assessing patients with suspected or confirmed recurrence of rectal cancer.
Environmental testing for new SOFIA flight hardware

NASA Astrophysics Data System (ADS)

Lachenmann, Michael; Wolf, Jürgen; Strecker, Rainer; Weckenmann, Benedikt; Trimpe, Fritz; Hall, Helen J.

2014-07-01

New flight hardware for the Stratospheric Observatory for Infrared Astronomy (SOFIA) has to be tested to prove its safety and functionality and to measure its performance under flight conditions. Although it is not expected to experience critical issues inside the pressurized cabin with close-to-normal conditions, all equipment has to be tested for safety margins in case of a decompression event and/or for unusual high temperatures, e.g. inside an electronic unit caused by a malfunction as well as unusual high ambient temperatures inside the cabin, when the aircraft is parked in a desert. For equipment mounted on the cavity side of the telescope, stratospheric conditions apply, i.e., temperatures from -40 °C to -60°C and an air pressure of about 0.1 bar. Besides safety aspects as not to endanger personnel or equipment, new hardware inside the cavity has to function and to perform to specifications under such conditions. To perform these tests, an environmental test laboratory was set up at the SOFIA Science Center at the NASA Ames Research Center, including a thermal vacuum chamber, temperature measurement equipment, and a control and data logging workstation. This paper gives an overview of the test and measurement equipment, shows results from the commissioning and characterization of the thermal vacuum chamber, and presents examples of the component tests that were performed so far. To test the focus position stability of optics when cooling them to stratospheric temperatures, an auto-collimation device has been developed. We will present its design and results from measurements on commercial off-the-shelf optics as candidates for the new Wide Field Imager for SOFIA as an example.

Canine (Pet Dog) Tumor Microsurgery and Intratumoral Concentration and Safety of Metronomic Chlorambucil for Spontaneous Glioma: A Phase I Clinical Trial.

PubMed

Bentley, R Timothy; Thomovsky, Stephanie A; Miller, Margaret A; Knapp, Deborah W; Cohen-Gadol, Aaron A

2018-06-04

Metronomic (daily low-dose) chlorambucil requires further study before use in human patients with glioma. The aim of this study was to investigate distribution and safety of metronomic chlorambucil in naturally occurring canine glioma. Eight client-owned (pet) dogs with newly diagnosed spontaneous glioma were prospectively enrolled. Chlorambucil was administered preoperatively at 4 mg/m 2 every 24 hours for ≥3 days and continued postoperatively until death or dose-limiting adverse events. Chlorambucil concentrations in the surgical glioma specimen, cerebrospinal fluid, and serum were analyzed. Dogs additionally received lomustine postoperatively. Dogs were monitored for seizures, myoclonus, cytopenias, and tumor recurrence. Complete microsurgical resection was achieved in 7 oligodendrogliomas and 1 astrocytoma (6 high grade, 2 low grade). Median surgical glioma specimen chlorambucil concentration was 0.52 ng/g (range, 0-2.62 ng/g), or 37% (range, 0%-178%) of serum concentration. Median cerebrospinal fluid concentration was 0.1 ng/mL (range, 0-0.3 ng/mL). Chlorambucil was not associated with increase in seizure activity. Six dogs displayed prolonged seizure-free intervals. There was no myoclonus. Three dogs developed asymptomatic thrombocytopenia after 8-12 months of chlorambucil. Median progression-free survival was 253 days (range, 63-860 days). Median overall survival was 257 days (range, 64-860 days). The presence of intratumoral chlorambucil indicated an altered blood-brain barrier that varied from case to case. Despite sporadic previous reports of neurotoxicity, prolonged seizure-free intervals supported a high safety margin at this dose in this species. Metronomic chlorambucil was well tolerated. Spontaneous canine glioma offers a robust preclinical model. Copyright © 2018 Elsevier Inc. All rights reserved.
The new generation of intravenous iron: chemistry, pharmacology, and toxicology of ferric carboxymaltose.

PubMed

Funk, Felix; Ryle, Peter; Canclini, Camillo; Neiser, Susann; Geisser, Peter

2010-01-01

An ideal preparation for intravenous iron replacement therapy should balance effectiveness and safety. Compounds that release iron rapidly tend to cause toxicity, while large molecules can induce antibody formation and cause anaphylactic reactions. There is therefore a need for an intravenous iron preparation that delivers appropriate amounts of iron in a readily available form but with minimal side effects and thus with an excellent safety profile. In this paper, a review is given on the chemistry, pharmacology, and toxicology of ferric carboxymaltose (FCM, Ferinject), a stable and robust complex formulated as a colloidal solution with a physiological pH. The complex is gradually taken up mainly from the hepatic reticulo-endothelial system (RES), followed by effective delivery of iron to the endogeneous transport system for the haem synthesis in new erythrocytes, as shown in studies on the pharmacodynamics and pharmacokinetics with radio-labelled FCM. Studies with radio-labelled FCM also demonstrated a barrier function of the placenta and a low transfer of iron into the milk of lactating rats. Safety pharmacology studies indicated a favourable profile with regard to cardiovascular, central nervous, respiratory, and renal toxicity. A high maximum non-lethal dose was demonstrated in the single-dose toxicity studies. Furthermore, based on the No-Observed-Adverse-Effect-Levels (NOAELs) found in repeated-dose toxicity studies and on the cumulative doses administered, FCM has good safety margins. Reproductive and developmental toxicity studies did not reveal any direct or indirect harmful effects. No genotoxic potential was found in in vitro or in vivo studies. Moreover, antigenicity studies showed no cross-reactivity of FMC with anti-dextran antibodies and also suggested that FCM does not possess sensitizing potential. Lastly, no evidence of irritation was found in local tolerance studies with FCM. This excellent toxicity profile and the high effectiveness of FCM allow the administration of high doses as a single infusion or bolus injection, which will enhance the cost-effectiveness and convenience of iron replacement therapy. In conclusion, FCM has many of the characteristics of an ideal intravenous iron preparation.
Controlling for quality in the hospital cost function.

PubMed

Carey, Kathleen; Stefos, Theodore

2011-06-01

This paper explores the relationship between the cost and quality of hospital care from the perspective of applied microeconomics. It addresses both theoretical and practical complexities entailed in incorporating hospital quality into the estimation of hospital cost functions. That literature is extended with an empirical analysis that examines the use of 15 Patient Safety Indicators (PSIs) as measures of hospital quality. A total operating cost function is estimated on 2,848 observations from five states drawn from the period 2001 to 2007. In general, findings indicate that the PSIs are successful in capturing variation in hospital cost due to adverse patient safety events. Measures that rely on the aggregate number of adverse events summed over PSIs are found to be superior to risk-adjusted rates for individual PSIs. The marginal cost of an adverse event is estimated to be $22,413. The results contribute to a growing business case for inpatient safety in hospital services.
Benzocaine as a fish anesthetic: efficacy and safety for spawning-phase salmon

USGS Publications Warehouse

Gilderhus, P.A.

1990-01-01

The anesthetic benzocaine was tested for efficacy and safety for spawning-phase chinook salmon (Oncorhynchus tshawytscha) and Atlantic salmon (Salmo salar) at federal fish hatcheries. Tests were conducted in the existing hatchery water supplies (soft water; temperatures, 10–13 °C. Crystalline benzocaine was dissolved in ethanol (1 g/30 mL), and aliquots of that stock solution were added to the water in test tanks. Benzocaine concentrations of 25–30 mg/L anesthetized most fish in less than 3.5 min, and most fish recovered in less than 10 min after 15 min of exposure. Safety margins were narrow; both species tolerated 30 mg/L for about 20 min, but 25 min of exposure caused deaths. For 15 min exposures, concentrations of 35 mg/L for chinook salmon and 40 mg/L for Atlantic salmon were lethal.
Highly integrated digital engine control system on an F-15 airplane

NASA Technical Reports Server (NTRS)

Burcham, F. W., Jr.; Haering, E. A., Jr.

1984-01-01

The highly integrated digital electronic control (HIDEC) program will demonstrate and evaluate the improvements in performance and mission effectiveness that result from integrated engine-airframe control systems. This system is being used on the F-15 airplane at the Dryden Flight Research Facility of NASA Ames Research Center. An integrated flightpath management mode and an integrated adaptive engine stall margin mode are being implemented into the system. The adaptive stall margin mode is a highly integrated mode in which the airplane flight conditions, the resulting inlet distortion, and the engine stall margin are continuously computed; the excess stall margin is used to uptrim the engine for more thrust. The integrated flightpath management mode optimizes the flightpath and throttle setting to reach a desired flight condition. The increase in thrust and the improvement in airplane performance is discussed in this paper.
Uplift history of a transform continental margin revealed by the stratigraphic record: The case of the Agulhas transform margin along the Southern African Plateau

NASA Astrophysics Data System (ADS)

Baby, Guillaume; Guillocheau, François; Boulogne, Carl; Robin, Cécile; Dall'Asta, Massimo

2018-04-01

The south and southeast coast of southern Africa (from 28°S to 33°S) forms a high-elevated transform passive margin bounded to the east by the Agulhas-Falkland Fracture Zone (AFFZ). We analysed the stratigraphic record of the Outeniqua and Durban (Thekwini) Basins, located on the African side of the AFFZ, to determine the evolution of these margins from the rifting stage to present-day. The goal was to reconstruct the strike-slip evolution of the Agulhas Margin and the uplift of the inland high-elevation South African Plateau. The Agulhas transform passive margin results from four successive stages: Rifting stage, from Late Triassic to Early Cretaceous ( 200?-134 Ma), punctuated by three successive rifting episodes related to the Gondwana breakup; Wrench stage (134-131 Ma), evidenced by strike- and dip-slip deformations increasing toward the AFFZ; Active transform margin stage (131-92 Ma), during which the Falkland/Malvinas Plateau drifts away along the AFFZ, with an uplift of the northeastern part of the Outeniqua Basin progressively migrating toward the west; Thermal subsidence stage (92-0 Ma), marked by a major change in the configuration of the margin (onset of the shelf-break passive margin morphology). Two main periods of uplift were documented during the thermal subsidence stage of the Agulhas Margin: (1) a 92 Ma short-lived margin-scale uplift, followed by a second one at 76 Ma located along the Outeniqua Basin and; (2) a long-lasting uplift from 40 to 15 Ma limited to the Durban (Thekwini) Basin. This suggests that the South African Plateau is an old Upper Cretaceous relief (90-70 Ma) reactivated during Late Eocene to Early Miocene times (40-15 Ma).
Experimental ablation of the pancreas with high intensity focused ultrasound (HIFU) in a porcine model.

PubMed

Xie, Biao; Li, Yu-Yuan; Jia, Lin; Nie, Yu-Qiang; Du, Hong; Jiang, Shu-Man

2010-12-17

The aim of this study was to determine the feasibility and safety of high intensity focused ultrasound's (HIFU) in pancreatic diseases. Twelve pigs were divided into three groups. The pancreases of pigs in Group A were ablated directly with HIFU, but those in Group B and C ablated by extracorporeal HIFU. The pigs in Group C were sacrificed at day 7 after HIFU. Serological parameters were determined pre-operation and post-operation. The entire pancreas was removed for histological examination. Each animal tolerate the HIFU ablation well. The complete necrosis was observed in targeted regions. The margins of the necrotic regions were clearly delineated from the surrounding normal tissues. Infiltration of inflammatory cells and phorocytosis on the boundary were found in group C. Blood and urine amylase levels were relatively steady after HIFU. No acute pancreatitis or severe complications occurred. In conclusion, HIFU ablation on the pancreas was safe and effective in experimental pigs.
Experimental ablation of the pancreas with high intensity focused ultrasound (HIFU) in a porcine model

PubMed Central

Xie, Biao; Li, Yu-Yuan; Jia, Lin; Nie, Yu-Qiang; Du, Hong; Jiang, Shu-Man

2011-01-01

The aim of this study was to determine the feasibility and safety of high intensity focused ultrasound's (HIFU) in pancreatic diseases. Twelve pigs were divided into three groups. The pancreases of pigs in Group A were ablated directly with HIFU, but those in Group B and C ablated by extracorporeal HIFU. The pigs in Group C were sacrificed at day 7 after HIFU. Serological parameters were determined pre-operation and post-operation. The entire pancreas was removed for histological examination. Each animal tolerate the HIFU ablation well. The complete necrosis was observed in targeted regions. The margins of the necrotic regions were clearly delineated from the surrounding normal tissues. Infiltration of inflammatory cells and phorocytosis on the boundary were found in group C. Blood and urine amylase levels were relatively steady after HIFU. No acute pancreatitis or severe complications occurred. In conclusion, HIFU ablation on the pancreas was safe and effective in experimental pigs. PMID:21197259
Navigating and circumventing a fragmented health system: the patient's pathway in the Sierra Madre Region of Chiapas, Mexico.

PubMed

Molina, Rose Leonard; Palazuelos, Daniel

2014-03-01

Mexico has implemented several important reforms in how health care for its poorest is financed and delivered. Seguro Popular, in particular, a recently implemented social insurance program, aims to provide new funds for a previously underfunded state-based safety net system. Through in-depth ethnographic structured interviews with impoverished farmers in the state of Chiapas, this article presents an analysis of Seguro Popular from the perspective of a highly underserved beneficiary group. Specific points of tension among the various stakeholders--the government system (including public clinics, hospitals, and vertical programs), community members, private doctors, and pharmacies--are highlighted and discussed. Ethnographic data presented in this article expose distinct gaps between national health policy rhetoric and the reality of access to health services at the community level in a highly marginalized municipality in one of Mexico's poorest states. These insights have important implications for the structure and implementation of on-going reforms. © 2014 by the American Anthropological Association.
Strategic groups and performance in the nursing home industry: a reexamination.

PubMed

Marlin, D; Sun, M; Huonker, J W

1999-06-01

This study further examines the relationship between strategic group membership and performance in the nursing home industry. The results indicate seven strategic groups in the industry with significant between-group differences in operating margin, average profit per patient day, catheterization rate, health deficiencies, life and safety deficiencies, and efficiency in the provision of services. The authors did not, however, find significant between-group differences in pressure sore rate, the use of restraints, or in the percentage of patients with significant unplanned weight changes. The group with the highest private-pay utilization combined with high Medicare utilization generally performed the best along all indicators. Results also suggest that strategic group membership and rural/urban location have a greater impact on performance than do ownership, chain membership, or possession of a dedicated specialty care unit.
Advanced-to-Revolutionary Space Technology Options - The Responsibly Imaginable

NASA Technical Reports Server (NTRS)

Bushnell, Dennis M.

2013-01-01

Paper summarizes a spectrum of low TRL, high risk technologies and systems approaches which could massively change the cost and safety of space exploration/exploitation/industrialization. These technologies and approaches could be studied in a triage fashion, the method of evaluation wherein several prospective solutions are investigated in parallel to address the innate risk of each, with resources concentrated on the more successful as more is learned. Technology areas addressed include Fabrication, Materials, Energetics, Communications, Propulsion, Radiation Protection, ISRU and LEO access. Overall and conceptually it should be possible with serious research to enable human space exploration beyond LEO both safe and affordable with a design process having sizable positive margins. Revolutionary goals require, generally, revolutionary technologies. By far, Revolutionary Energetics is the most important, has the most leverage, of any advanced technology for space exploration applications.
Synovial sarcoma of the temporomandibular joint and infratemporal fossa.

PubMed

Nomura, Fuminori; Kishimoto, Seiji

2014-12-01

Synovial sarcoma in the head and neck region is rare, and is difficult to resect with adequate safety margins because of its anatomical complexity. We herein report our experiences with synovial sarcoma in this region, and review the literature regarding the management of such cases. We retrospectively examined four cases of synovial sarcoma arising from the temporomandibular joint (TMJ) area and infratemporal fossa. Only one patient remains alive without disease, while the other three patients have died. The local control of these tumors has improved because of the progress in the surgical operation methods, while it is expected that there is still a high rate of deaths due to distant metastasis increase. The development of strong chemotherapy is needed for the use after the initial treatment and surgery. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Studenski, M; Abramowitz, M; Dogan, N

Purpose: Quantify the dosimetric cost for a margin around the MRI-defined high risk GTV for simultaneous integrated intra-prostatic boosts (SIIB) treated with RapidArc. Methods: For external beam radiotherapy of the prostate, a 3-7 mm PTV margin is typically used to account for setup and intra-fraction uncertainties after adjusting for inter-fraction motion. On the other hand, our current paradigm is to treat the MRI-defined high risk GTV with no margin. In this work, 11 patients treated SIIB (7 post-prostatectomy, 4 intact prostate) with RapidArc were re-planned with 1-5 mm margins around the GTV to quantify dosimetric effects. Two 358 degree, 10more » MV RapidArcs were used to deliver 68 Gy (76.5 Gy boost) to the post-prostatectomy patients and 80 Gy (86 Gy boost) to the intact prostates. Paired, two tail t-tests were used to determine if there were any significant differences (p<0.05) in the total MUs and dosimetric parameters used to evaluate rectum, bladder, and PTV dose with and without margin. Results: The average GTV volume without margin was 8.1cc (2.8% of the PTV volume) while the average GTV volume with a 5 mm margin was 20.1cc (9.0% of the PTV volume). GTV volumes ranged from 0.2% of the PTV volume up to 33.0%. Despite these changes in volume, the only statistical difference was found for the rectal V65 Gy with a 5 mm margin (18.6% vs. 19.4%; p-value = 0.026) when all patients were considered as a single group. No difference was found when analyzed as two groups. The rectum V40Gy, bladder V40Gy and V65Gy, PTV Dmax and D95% or the total MUs did not show any significant difference for any margin. Conclusion: A 4 mm margin on the high risk GTV is possible with no statistically significant change in dosimetry or total MUs. Further work will assess the appropriate margin required for intra-prostatic boosts.« less
Sensitivity-Uncertainty Techniques for Nuclear Criticality Safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, Forrest B.; Rising, Michael Evan; Alwin, Jennifer Louise

2017-08-07

The sensitivity and uncertainty analysis course will introduce students to k eff sensitivity data, cross-section uncertainty data, how k eff sensitivity data and k eff uncertainty data are generated and how they can be used. Discussion will include how sensitivity/uncertainty data can be used to select applicable critical experiments, to quantify a defensible margin to cover validation gaps and weaknesses, and in development of upper subcritical limits.
Nuclear reactor melt arrest and coolability device

DOEpatents

Theofanous, Theo G.; Dinh, Nam Truc; Wachowiak, Richard M.

2016-06-14

Example embodiments provide a Basemat-Internal Melt Arrest and Coolability device (BiMAC) that offers improved spatial and mechanical characteristics for use in damage prevention and risk mitigation in accident scenarios. Example embodiments may include a BiMAC having an inclination of less than 10-degrees from the basemat floor and/or coolant channels of less than 4 inches in diameter, while maintaining minimum safety margins required by the Nuclear Regulatory Commission.
Fractional watt Vuillemier cryogenic refrigerator program engineering notebook. Volume 2: Stress analysis

NASA Technical Reports Server (NTRS)

Miller, W. S.

1974-01-01

A structural analysis performed on the 1/4-watt cryogenic refrigerator. The analysis covered the complete assembly except for the cooling jacket and mounting brackets. Maximum stresses, margin of safety, and natural frequencies were calculated for structurally loaded refrigerator components shown in assembly drawings. The stress analysis indicates that the design is satisfactory for the specified vibration environment, and the proof, burst, and normal operating loads.
Artificial intelligence for turboprop engine maintenance

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-01-01

Long-term maintenance operations, causing the unit to out of action, may seem economical - but they result in reduced operating readiness. Offsetting that concern, careless, hurried maintenance reduces margins of safety and reliability. Any tool that improves maintenance without causing a sharp increase in cost is valuable. Artificial intelligence (AI) is one of the tools. Expert system and neural networks are two different areas of AI that show promise for turboprop engine maintenance.
Concussion is completely reversible; an hypothesis.

PubMed

Parkinson, D

1992-01-01

It is hypothesized that there is an entity properly called 'concussion', a transient loss of neuronal function without permanent neuronal damage, as defined years ago by Derek-Denny Brown. This implies that multiple concussions leave no deficit. n +1 times zero is still zero. Arguments are presented indicating that there is a margin of safety between the acceleration inducing 1-10 s loss of function (concussion) and that inducing permanent damage (contusions, lacerations).
Climate change threatens the world's marine protected areas

NASA Astrophysics Data System (ADS)

Bruno, John F.; Bates, Amanda E.; Cacciapaglia, Chris; Pike, Elizabeth P.; Amstrup, Steven C.; van Hooidonk, Ruben; Henson, Stephanie A.; Aronson, Richard B.

2018-06-01

Marine protected areas (MPAs) are a primary management tool for mitigating threats to marine biodiversity1,2. MPAs and the species they protect, however, are increasingly being impacted by climate change. Here we show that, despite local protections, the warming associated with continued business-as-usual emissions (RCP8.5)3 will likely result in further habitat and species losses throughout low-latitude and tropical MPAs4,5. With continued business-as-usual emissions, mean sea-surface temperatures within MPAs are projected to increase 0.035 °C per year and warm an additional 2.8 °C by 2100. Under these conditions, the time of emergence (the year when sea-surface temperature and oxygen concentration exceed natural variability) is mid-century in 42% of 309 no-take marine reserves. Moreover, projected warming rates and the existing `community thermal safety margin' (the inherent buffer against warming based on the thermal sensitivity of constituent species) both vary among ecoregions and with latitude. The community thermal safety margin will be exceeded by 2050 in the tropics and by 2150 for many higher latitude MPAs. Importantly, the spatial distribution of emergence is stressor-specific. Hence, rearranging MPAs to minimize exposure to one stressor could well increase exposure to another. Continued business-as-usual emissions will likely disrupt many marine ecosystems, reducing the benefits of MPAs.
Compton Camera and Prompt Gamma Ray Timing: Two Methods for In Vivo Range Assessment in Proton Therapy

PubMed Central

Hueso-González, Fernando; Fiedler, Fine; Golnik, Christian; Kormoll, Thomas; Pausch, Guntram; Petzoldt, Johannes; Römer, Katja E.; Enghardt, Wolfgang

2016-01-01

Proton beams are promising means for treating tumors. Such charged particles stop at a defined depth, where the ionization density is maximum. As the dose deposit beyond this distal edge is very low, proton therapy minimizes the damage to normal tissue compared to photon therapy. Nevertheless, inherent range uncertainties cast doubts on the irradiation of tumors close to organs at risk and lead to the application of conservative safety margins. This constrains significantly the potential benefits of protons over photons. In this context, several research groups are developing experimental tools for range verification based on the detection of prompt gammas, a nuclear by-product of the proton irradiation. At OncoRay and Helmholtz-Zentrum Dresden-Rossendorf, detector components have been characterized in realistic radiation environments as a step toward a clinical Compton camera. On the one hand, corresponding experimental methods and results obtained during the ENTERVISION training network are reviewed. On the other hand, a novel method based on timing spectroscopy has been proposed as an alternative to collimated imaging systems. The first tests of the timing method at a clinical proton accelerator are summarized, its applicability in a clinical environment for challenging the current safety margins is assessed, and the factors limiting its precision are discussed. PMID:27148473

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Curtis L.; Prescott, Steven; Coleman, Justin

This report describes the current progress and status related to the Industry Application #2 focusing on External Hazards. For this industry application within the Light Water Reactor Sustainability (LWRS) Program Risk-Informed Safety Margin Characterization (RISMC) R&D Pathway, we will create the Risk-Informed Margin Management (RIMM) approach to represent meaningful (i.e., realistic facility representation) event scenarios and consequences by using an advanced 3D facility representation that will evaluate external hazards such as flooding and earthquakes in order to identify, model and analyze the appropriate physics that needs to be included to determine plant vulnerabilities related to external events; manage the communicationmore » and interactions between different physics modeling and analysis technologies; and develop the computational infrastructure through tools related to plant representation, scenario depiction, and physics prediction. One of the unique aspects of the RISMC approach is how it couples probabilistic approaches (the scenario) with mechanistic phenomena representation (the physics) through simulation. This simulation-based modeling allows decision makers to focus on a variety of safety, performance, or economic metrics. In this report, we describe the evaluation of various physics toolkits related to flooding representation. Ultimately, we will be coupling the flooding representation with other events such as earthquakes in order to provide coupled physics analysis for scenarios where interactions exist.« less
Structures for handling high heat fluxes

NASA Astrophysics Data System (ADS)

Watson, R. D.

1990-12-01

The divertor is reconized as one of the main performance limiting components for ITER. This paper reviews the critical issues for structures that are designed to withstand heat fluxes > 5 MW/m 2. High velocity, sub-cooled water with twisted tape inserts for enhanced heat transfer provides a critical heat flux limit of 40-60 MW/m 2. Uncertainties in physics and engineering heat flux peaking factors require that the design heat flux not exceed 10 MW/m 2 to maintain an adequate burnout safety margin. Armor tiles and heat sink materials must have a well matched thermal expansion coefficient to minimize stresses. The divertor lifetime from sputtering erosion is highly uncertain. The number of disruptions specified for ITER must be reduced to achieve a credible design. In-situ plasma spray repair with thick metallic coatings may reduce the problems of erosion. Runaway electrons in ITER have the potential to melt actively cooled components in a single event. A water leak is a serious accident because of steam reactions with hot carbon, beryllium, or tungsten that can mobilize large amounts of tritium and radioactive elements. If the plasma does not shutdown immediately, the divertor can melt in 1-10 s after a loss of coolant accident. Very high reliability of carbon tile braze joints will be required to achieve adequate safety and performance goals. Most of these critical issues will be addressed in the near future by operation of the Tore Supra pump limiters and the JET pumped divertor. An accurate understanding of the power flow out of edge of a DT burning plasma is essential to successful design of high heat flux components.
Procalcitonin-guided antibiotic therapy in patients with fever in a general emergency department population: a multicenter noninferiority randomized clinical trial (HiTEMP study).

PubMed

van der Does, Yuri; Limper, Maarten; Jie, Kim E; Schuit, Stephanie C E; Jansen, Henry; Pernot, Niki; van Rosmalen, Joost; Poley, Marten J; Ramakers, Christian; Patka, Peter; van Gorp, Eric C M; Rood, Pleunie P M

2018-06-02

Overuse of broad-spectrum antibiotics in emergency departments(EDs) results in antibiotic resistance. We determined if procalcitonin(PCT)-guided therapy can be used to reduce antibiotic regimens in EDs by investigating efficacy, safety and accuracy. This was a noninferiority multicenter randomized clinical trial, performed in two Dutch hospitals. Adult patients with fever ≥38.2°C(100.8°F) in triage were randomized between standard diagnostic workup(control group) and PCT-guided therapy, defined as standard workup with addition of one single PCT measurement. Treatment algorithm encouraged withholding antibiotic regimens with PCT<0.5μg/L, and starting antibiotic regimens PCT≥0.5μg/L. Exclusion criteria were immunocompromised conditions, pregnancy, moribund patients, patients <72h after surgery or requiring primary surgical intervention. Primary outcomes were efficacy, defined as number of prescribed antibiotic regimens; safety, defined as combined-safety-endpoint(CSE) consisting of 30-days mortality, intensive-care unit admission, ED-return-visit within 2 weeks; accuracy, defined as sensitivity, apecificity and area-under-the-curve(AUC) of PCT for bacterial infections. Noninferiority margin for safety outcome was 7.5%. Between August 2014 and January 2017, 551 patients were included. In the PCT-guided group(n=275) 200(73%)patients were prescribed antibiotic regimens, in the control group(n=276) 212(77%)(p=0.28). There was no significant difference in CSE between the PCT-guided group, 29(11%), and control group, 46(16%)(p=0.16), with a noninferiority margin of 0.46%(n=526). AUC for confirmed bacterial infections for PCT was 0.681(95%CI0.633-0.730), for CRP 0.619(95%CI 0.569-0.669).: CONCLUSIONS.: PCT-guided therapy was noninferior in terms of safety, but did not reduce prescription of antibiotic regimens in an ED population with fever. In this heterogeneous population, the accuracy of PCT in diagnosing bacterial infections was poor. TRIAL REGISTRATION IN NETHERLANDS TRIAL REGISTER: http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=4949. Copyright © 2018. Published by Elsevier Ltd.
Structural characterization of nanoscale intermetallic precipitates in highly neutron irradiated reactor pressure vessel steels

DOE PAGES

Sprouster, D. J.; Sinsheimer, J.; Dooryhee, E.; ...

2015-10-21

Here, massive, thick-walled pressure vessels are permanent nuclear reactor structures that are exposed to a damaging flux of neutrons from the adjacent core. The neutrons cause embrittlement of the vessel steel that increases with dose (fluence or service time), as manifested by an increasing temperature transition from ductile-to-brittle fracture. Moreover, extending reactor life requires demonstrating that large safety margins against brittle fracture are maintained at the higher neutron fluence associated with 60 to 80 years of service. Here synchrotron-based x-ray diffraction and small angle x-ray scattering measurements are used to characterize a new class of highly embrittling nm-scale Mn-Ni-Si precipitatesmore » that develop in the irradiated steels at high fluence. Furthermore, these precipitates can lead to severe embrittlement that is not accounted for in current regulatory models. Application of the complementarity techniques has, for the very first time, successfully characterized the crystal structures of the nanoprecipitates, while also yielding self-consistent compositions, volume fractions and size distributions.« less
A high power lithium thionyl chloride battery for space applications

NASA Technical Reports Server (NTRS)

Shah, Pinakin M.

1993-01-01

A high power, 28 V, 330 A h, active lithium thionyl chloride battery has been developed for use as main and payload power sources on an expendable launch vehicle. Nine prismatic cells, along with the required electrical components and a built-in heater system, are efficiently packaged resulting in significant weight savings over presently used silver-zinc batteries. The high rate capability is achieved by designing the cells with a large electrochemical surface area and impregnating an electrocatalyst, polymeric phthalocyanine, into the carbon cathodes. Passivation effects are reduced with the addition of sulfur dioxide into the thionyl chloride electrolyte solution. The results of conducting a detailed thermal analysis are utilized to establish the heater design parameters and the thermal insulation requirements of the battery. An analysis of cell internal pressure and vent characteristics clearly illustrates the margins of safety under different operating conditions. Performance of fresh cells is discussed using polarization scan and discharge data at different rates and temperatures. Self-discharge rate is estimated based upon test results on cells after storage. Results of testing a complete prototype battery are described.
Withstanding a record drought: Dry season sap flow and safety margins of canopy epiphytes in three sites along an elevation gradient in a tropical montane cloud forest

NASA Astrophysics Data System (ADS)

Gotsch, S. G.; Darby, A.; Glunk, A.; Murray, J.; Draguljic, D.

2016-12-01

Tropical montane cloud forests (TMCFs) are projected to experience shifts in microclimate due to changes in precipitation patterns and cloud base heights. Understanding how the TMCF will be affected by such changes is critical since these forests harbor a great number of endemic species and the intact forest plays an important role in local and regional hydrology. The epiphyte community is one of the characteristic components of this unique ecosystem. Epiphytes contribute greatly to the biomass and diversity of the forest, and play an important role in the TMCF water cycle. The ecosystem role played by the epiphyte community may be lost if these species, which lack roots to the ground, cannot withstand projected changes in climate. We measured dry season sap flow in canopy epiphytes in three sites along an elevation gradient, in Monteverde Costa Rica during an extreme drought event. In addition, we measured predawn and midday leaf water potentials, and dry season pressure-volume curves on focal species. We found that during a month-long dry period, species in all sites reduced transpiration considerably, and for a two-week period, sap flow rates were close to zero. During this time, predawn and midday leaf water potentials remained high (> -1.0 MPa) due to the utilization of stored leaf water and strong stomatal regulation. At the end of the dry season, midday leaf water potentials were approximately 2x lower in the driest versus the wettest site (AVG: -0.94 vs. -0.47 MPa) although hydraulic safety margins were greater at the driest sites. Our results indicate that epiphyte communities vary in their water use strategies and that the epiphyte community in wetter sites is more likely to experience hydraulic failure if there are increases in the number of days without precipitation and/or increases in temperature.
Gamma knife radiosurgery for symptomatic brainstem intra-axial cavernous malformations.

PubMed

Park, Seong-Hyun; Hwang, Sung-Kyoo

2013-12-01

The purpose of this study was to evaluate the efficacy and safety of gamma knife radiosurgery (GKRS) for the treatment of symptomatic brainstem intra-axial cavernous malformations (CMs) associated with high surgical morbidity. Twenty-one patients with symptomatic brainstem intra-axial CMs were treated by GKRS between 2005 and 2010. One patient was lost to follow-up. The median age of the patients was 39.5 years (range, 24-69 years). All patients had experienced 1 or more symptomatic hemorrhages before GKRS (range, 1-3). The median marginal radiation dose was 13 Gy, and the median volume of the malformation was 0.56 mL. The median follow-up period after radiosurgery was 32 months (range, 12-82 months; mean, 38.9 months). Before GKRS, 31 hemorrhages (1.55 per patient) were observed. The annual hemorrhage rate before GKRS was 39.5%, excluding the first hemorrhage. After GKRS, 1 hemorrhage (0.05 per patient) was identified. It occurred 6 months after radiosurgery. The patient showed complete recovery to a premorbid status with steroid medication. The annual hemorrhage rate after GKRS was 8.2% for the first 2 years. After the expected latency period, no hemorrhages were identified. One patient (5%) exhibited permanent paresthesia, which was a new neurologic symptom in absence of any hemorrhagic event, after the radiosurgery. GKRS seems to be relatively effective and safe for reducing the rebleeding rate of brainstem intra-axial CMs that have high surgical risk. Careful selection of a low marginal dose and an optimal radiosurgical technique are helpful to achieve good outcomes. Copyright © 2013 Elsevier Inc. All rights reserved.
Predicting plant vulnerability to drought in biodiverse regions using functional traits.

PubMed

Skelton, Robert Paul; West, Adam G; Dawson, Todd E

2015-05-05

Attempts to understand mechanisms underlying plant mortality during drought have led to the emergence of a hydraulic framework describing distinct hydraulic strategies among coexisting species. This framework distinguishes species that rapidly decrease stomatal conductance (gs), thereby maintaining high water potential (Px; isohydric), from those species that maintain relatively high gs at low Px, thereby maintaining carbon assimilation, albeit at the cost of loss of hydraulic conductivity (anisohydric). This framework is yet to be tested in biodiverse communities, potentially due to a lack of standardized reference values upon which hydraulic strategies can be defined. We developed a system of quantifying hydraulic strategy using indices from vulnerability curves and stomatal dehydration response curves and tested it in a speciose community from South Africa's Cape Floristic Region. Degree of stomatal regulation over cavitation was defined as the margin between Px at stomatal closure (Pg12) and Px at 50% loss of conductivity. To assess relationships between hydraulic strategy and mortality mechanisms, we developed proxies for carbon limitation and hydraulic failure using time since Pg12 and loss of conductivity at minimum seasonal Px, respectively. Our approach captured continuous variation along an isohydry/anisohydry axis and showed that this variation was linearly related to xylem safety margin. Degree of isohydry/anisohydry was associated with contrasting predictions for mortality during drought. Merging stomatal regulation strategies that represent an index of water use behavior with xylem vulnerability facilitates a more comprehensive framework with which to characterize plant response to drought, thus opening up an avenue for predicting the response of diverse communities to future droughts.
Influence of margin segmentation and anomalous volcanism upon the break-up of the Hatton Bank rifted margin, west of the UK

NASA Astrophysics Data System (ADS)

Elliott, G. M.; Parson, L. M.

2007-12-01

The Hatton Bank margin, flanking the Iceland Basin is a widely cited example of a volcanic rifted margin. Prior to this study insights into the break-up history of the margin have been limited to profiles in the north and south, yet whilst valuable, the along margin tectono-magmatic variability has not been revealed. Over 5660 line km of high quality reflection seismic profiles with supplementary multibeam bathymetry were collected to support the UK's claim to Hatton region under the United Nations Convention on Law of the Sea (UNCLOS). Integration of this new data with existing profiles, allowed the margin to be divided into three segments, each of which are flanked by oceanic crust with a smooth upper surface and internal dipping reflectors. The southernmost segment is characterised by a series of inner and outer seaward dipping reflector (SDR) packages, which are separated by an outer high feature. The outer SDR are truncated by Endymion Spur, a chain of steep sided, late stage volcanic cones linked with necks. The central sector has no inner SDR package and is characterised by the presence of a highly intruded continental block, the Hatton Bank Block (HBB). The northern sector is adjacent to Lousy Bank, with a wider region of SDR recognised than to the south and a high amount of volcanic cones imaged. The variations in the distribution of the SDR's along the margin, the presence of the HBB and Endymion Spur all suggest that the break-up process was not uniform alongstrike. The division of the margin into three sectors reveals that structural segmentation played an important role in producing the variations along the margin. Break- up initiated in the south and progressed north producing the SDR packages witnessed, when the HBB was encountered the focus of break-up moved seaward of the block. The northern sector was closer to the Iceland Hotspot and hence a greater amount of volcanism is encountered. The smooth oceanic basement also indicates a high thermal flux leading to high melt production and subsidence rates forming the dipping reflectors. Shortly after break-up the eruption of Endymion Spur occurred. The nature of the magma erupted is unknown but from the steepness of the cones, it is inferred to be viscous and considering the setting, mostly likely a tholeiitic cumulate. A possible trigger for the Endymion Spur is the passage of a pulse of hotter than normal asthenospheric material along the margin, which interacted with lower crustal material to produce melt to feed the volcanic centres. Enhanced asthenospheric heat flow has been invoked to explain the V-shaped ridges along the present day Reykjanes Ridge and it is probable that the Endymion Spur represents previous such pulses along the margin/spreading axis. The location of the enhanced volcanism is itself controlled by crustal segmentation, with the Endymion Spur limited to the southern sector. The crustal thickness in this sector is approx. 2 to 3 km thinner than that found in the central segment, in which Endymion Spur is absent. The role of the segmentation along the margin has influenced the break-up style (presence or absence of SDR) and also the location and nature of post break-up volcanism.
Effective elastic thickness along the conjugate passive margins of India, Madagascar and Antarctica: A re-evaluation using the Hermite multitaper Bouguer coherence application

NASA Astrophysics Data System (ADS)

Ratheesh-Kumar, R. T.; Xiao, Wenjiao

2018-05-01

Gondwana correlation studies had rationally positioned the western continental margin of India (WCMI) against the eastern continental margin of Madagascar (ECMM), and the eastern continental margin of India (ECMI) against the eastern Antarctica continental margin (EACM). This contribution computes the effective elastic thickness (Te) of the lithospheres of these once-conjugated continental margins using the multitaper Bouguer coherence method. The results reveal significantly low strength values (Te ∼ 2 km) in the central segment of the WCMI that correlate with consistently low Te values (2-3 km) obtained throughout the entire marginal length of the ECMM. This result is consistent with the previous Te estimates of these margins, and confirms the idea that the low-Te segments in the central part of the WCMI and along the ECMM represents paleo-rift inception points of the lithospheric margins that was thermally and mechanically weakened by the combined action of the Marion hotspot and lithospheric extension during the rifting. The uniformly low-Te value (∼2 km) along the EACM indicates a mechanically weak lithospheric margin, probably due to considerable stretching of the lithosphere, considering the fact that this margin remained almost stationary throughout its rift history. In contrast, the ECMI has comparatively high-Te variations (5-11 km) that lack any correlation with the regional tectonic setting. Using gravity forward and inversion applications, we find a leading order of influence of sediment load on the flexural properties of this marginal lithosphere. The study concludes that the thick pile of the Bengal Fan sediments in the ECMI masks and has erased the signal of the original load-induced topography, and its gravity effect has biased the long-wavelength part of the observed gravity signal. The hence uncorrelated flat topography and deep lithospheric flexure together contribute a bias in the flexure modeling, which likely accounts a relatively high Te estimate.
Breakup magmatism on the Vøring Margin, mid-Norway: New insight from interpretation of high-quality 2D and 3D seismic reflection data

NASA Astrophysics Data System (ADS)

Abdelmalak, M. M.; Planke, S.; Millett, J.; Jerram, D. A.; Maharjan, D.; Zastrozhnov, D.; Schmid, D. W.; Faleide, J. I.; Svensen, H.; Myklebust, R.

2017-12-01

The Vøring Margin offshore mid-Norway is a classic volcanic rifted margin, characterized by voluminous Paleogene igneous rocks present on both sides of the continent-ocean boundary. The margin displays (1) thickened transitional crust with a well-defined lower crustal high-velocity body and prominent deep crustal reflections, the so-called T-Reflection, (2) seaward dipping reflector (SDR) wedges and a prominent northeast-trending escarpment on the Vøring Marginal High, and (3) extensive sill complexes in the adjacent Cretaceous Vøring Basin. During the last decade, new 2D and 3D industry seismic data along with improved processing techniques, such as broadband processing and noise reduction processing sequences, have made it possible to image and map the breakup igneous complex in much greater detail than previously possible. Our interpretation includes a combination of (1) seismic horizon picking, (2) integrated seismic-gravity-magnetic (SGM) interpretation, (3) seismic volcanostratigraphy, and (4) igneous seismic geomorphology. The results are integrated with published wide-angle seismic data, re-analyzed borehole data including new geochronology, and new geodynamic modeling of the effects of magmatism on the thermal history and subsidence of the margin. The extensive sill complexes and associated hydrothermal vent complexes in the Vøring Basin have a Paleocene-Eocene boundary age based on high-precision U/Pb dating combined with seismic mapping constraints. On the marginal high, our results show a highly variable crustal structure, with a pre-breakup configuration consisting of large-scale structural highs and sedimentary basins. These structures were in-filled and covered by basalt flows and volcanogenic sediments during the early stages of continental breakup in the earliest Eocene. Subsequently, rift basins developed along the continent-ocean boundary and where infilled by up to ca. 6 km thick basalt sequences, currently imaged as SDRs fed by a dike swarm imaged on seismic data. The addition of magma within the crust had a prominent effect on the thermal history and hydrocarbon maturation of the sedimentary basin, causing uplift, delayed subsidence, and possibly contributing to the triggering of global warming during the Paleocene-Eocene Thermal Maximum (PETM).
The Parable of the Boiled System Safety Professional: Drift to Failure

NASA Technical Reports Server (NTRS)

Shivers, C. Herbert

2011-01-01

Recall from the Parable of the Boiled Frog, that tossing a frog into boiling water causes the frog to jump out and hop away while placing a frog in suitable temperature water and slowly bringing the water to a boil results in the frog boiling due to not being aware of the slowly increasing danger, theoretically, of course. System safety professionals must guard against allowing dangers to creep unnoticed into their projects and be ever alert to notice signs of impending problems. People have used various phrases related to the idea, most notably, latent conditions, James Reason in Managing the Risks of Organizational Accidents (1, pp 10-11), Drift to Failure, Sydney Dekker (2, pp 82-86) in Resilience Engineering: Chronicling the Emergence of Confused Consensus in Resilience Engineering: Concepts and Precepts, Hollnagel, Woods and Leveson, and normalization of deviance, Diane Vaughan in The Challenger Launch Decision: Risky Technology, Culture, and Deviance at NASA (3). Reason also said, If eternal vigilance is the price of liberty, then chronic unease is the price of safety (1, p 37). Our challenge as system safety professionals is to be aware of the emergence of signals that warn us of slowly eroding safety margins. This paper will discuss how system safety professionals might better perform in that regard.
How safe are our paediatric emergency departments? Protocol for a national prospective cohort study.

PubMed

Plint, Amy C; Newton, Amanda; Stang, Antonia; Bhatt, Maala; Barrowman, Nick; Calder, Lisa

2014-12-04

Adverse events (AEs), defined as unintended patient harm related to healthcare provided rather than an underlying medical condition, represent a significant threat to patient safety and public health. The emergency department (ED) is a high-risk patient safety setting for many reasons including presentation 'outside of regular hours', high patient volumes, and a chaotic work environment. Children have also been identified as particularly vulnerable to AEs. Despite the identification of the ED as a high-risk setting and the vulnerability of the paediatric population, little research has been conducted regarding paediatric patient safety in the ED. The study objective is to generate an estimate of the risk and type of AEs, as well as their preventability and severity, for children seen in Canadian paediatric EDs. This multicentre, prospective cohort study will enrol patients under 18 years of age from nine paediatric EDs across Canada. A stratified cluster random sampling scheme will be used to ensure patients recruited are representative of the overall ED population. A rigorous, standardised two-stage process will be used for AE identification. The primary outcome will be the proportion of children with AEs associated with ED care in the 3 weeks following the ED visit. Secondary outcomes will include the proportion of children with preventable AEs and the types and severity of AEs. We will aim to recruit 5632 patients over 1 year and this will allow us to detect a proportion of patients with an AE of 5% (to within an absolute margin of error of 0.6%). Ethics approval has been obtained from participating sites. Results will be disseminated through presentations, peer review publications, linkages with emergency research network and a webinars for key knowledge user groups. This study is registered at Clinicaltrials.gov (NCT02162147; https://clinicaltrials.gov/ct2/show/NCT02162147). Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.
Where Do Agricultural Producers Get Safety and Health Information?

PubMed

Chiu, Sophia; Cheyney, Marsha; Ramirez, Marizen; Gerr, Fred

2015-01-01

There is little empirical guidance regarding communication sources and channels used and trusted by agricultural producers. The goal of this study was to characterize frequency of use and levels of trust in agricultural safety and health information sources and channels accessed by agricultural producers. A sample of 195 agricultural producers was surveyed at county fairs in Iowa. Information was collected about the frequency of use and level of trust in 14 information sources and channels. Associations between age, gender, and education level and use and trust of each information source or channel were estimated using logistic regression. The sample consisted of 72% men with a mean age of 50.1 (SD = 15.6) years. Newspaper and magazine articles were the most commonly used agricultural safety and health information source or channel; 77% (n = 140) of respondents reporting using them at least monthly. Among those reporting monthly or more frequent use, 75% reported trusting mostly or completely, compared with 58% using and 49% trusting the Internet. High levels of use and trust of newspaper and magazine articles did not vary significantly by age, gender, or education level. Age in the highest tertile (57-83 years) was marginally associated with lower odds of using, as well as using and trusting, all the information sources and channels studied except for medical clinics (use only: odds ratio [OR], 3.51, 95% confidence interval [CI], 0.79-15.64; use and trust: OR, 5.90, 95% CI, 0.91-38.42). These findings suggest that traditional media may be more effective than digital media for delivering agricultural safety and health information to agricultural producers. Medical clinics may be an untapped venue for communicating with older agricultural producers.
Factors contributing to commercial vehicle rear-end conflicts in China: A study using on-board event data recorders.

PubMed

Bianchi Piccinini, Giulio; Engström, Johan; Bärgman, Jonas; Wang, Xuesong

2017-09-01

In the last 30years, China has undergone a dramatic increase in vehicle ownership and a resulting escalation in the number of road crashes. Although crash figures are decreasing today, they remain high; it is therefore important to investigate crash causation mechanisms to further improve road safety in China. To shed more light on the topic, naturalistic driving data was collected in Shanghai as part of the evaluation of a behavior-based safety service. The data collection included instrumenting 47 vehicles belonging to a commercial fleet with data acquisition systems. From the overall sample, 91 rear-end crash or near-crash (CNC) events, triggered by 24 drivers, were used in the analysis. The CNC were annotated by three researchers, through an expert assessment methodology based on videos and kinematic variables. The results show that the main factor behind the rear-end CNC was the adoption of very small safety margins. In contrast to results from previous studies in the US, the following vehicles' drivers typically had their eyes on the road and reacted quickly in response to the evolving conflict in most events. When delayed reactions occurred, they were mainly due to driving-related visual scanning mismatches (e.g., mirror checks) rather than visual distraction. Finally, the study identified four main conflict scenarios that represent the typical development of rear-end conflicts in this data. The findings of this study have several practical applications, such as informing the specifications of in-vehicle safety measures and automated driving and providing input into the design of coaching/training procedures to improve the driving habits of drivers. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.
The marginal band system in nymphalid butterfly wings.

PubMed

Taira, Wataru; Kinjo, Seira; Otaki, Joji M

2015-01-01

Butterfly wing color patterns are highly complex and diverse, but they are believed to be derived from the nymphalid groundplan, which is composed of several color pattern systems. Among these pattern systems, the marginal band system, including marginal and submarginal bands, has rarely been studied. Here, we examined the color pattern diversity of the marginal band system among nymphalid butterflies. Marginal and submarginal bands are usually expressed as a pair of linear bands aligned with the wing margin. However, a submarginal band can be expressed as a broken band, an elongated oval, or a single dot. The marginal focus, usually a white dot at the middle of a wing compartment along the wing edge, corresponds to the pupal edge spot, one of the pupal cuticle spots that signify the locations of color pattern organizing centers. A marginal band can be expressed as a semicircle, an elongated oval, or a pair of eyespot-like structures, which suggest the organizing activity of the marginal focus. Physical damage at the pupal edge spot leads to distal dislocation of the submarginal band in Junonia almana and in Vanessa indica, suggesting that the marginal focus functions as an organizing center for the marginal band system. Taken together, we conclude that the marginal band system is developmentally equivalent to other symmetry systems. Additionally, the marginal band is likely a core element and the submarginal band a paracore element of the marginal band system, and both bands are primarily specified by the marginal focus organizing center.
California safety-net hospitals likely to be penalized by ACA value, readmission, and meaningful-use programs.

PubMed

Gilman, Matlin; Adams, E Kathleen; Hockenberry, Jason M; Wilson, Ira B; Milstein, Arnold S; Becker, Edmund R

2014-08-01

The Affordable Care Act includes provisions to increase the value obtained from health care spending. A growing concern among health policy experts is that new Medicare policies designed to improve the quality and efficiency of hospital care, such as value-based purchasing (VBP), the Hospital Readmissions Reduction Program (HRRP), and electronic health record (EHR) meaningful-use criteria, will disproportionately affect safety-net hospitals, which are already facing reduced disproportionate-share hospital (DSH) payments under both Medicare and Medicaid. We examined hospitals in California to determine whether safety-net institutions were more likely than others to incur penalties under these programs. To assess quality, we also examined whether mortality outcomes were different at these hospitals. Our study found that compared to non-safety-net hospitals, safety-net institutions had lower thirty-day risk-adjusted mortality rates in the period 2009-11 for acute myocardial infarction, heart failure, and pneumonia and marginally lower adjusted Medicare costs. Nonetheless, safety-net hospitals were more likely than others to be penalized under the VBP program and the HRRP and more likely not to meet EHR meaningful-use criteria. The combined effects of Medicare value-based payment policies on the financial viability of safety-net hospitals need to be considered along with DSH payment cuts as national policy makers further incorporate performance measures into the overall payment system. Project HOPE—The People-to-People Health Foundation, Inc.
Environmental Inventory Report. East St. Louis and Vicinity, Cahokia Canal Drainage Area, Madison and St. Clair Counties, Illinois. Volume 2.

DTIC Science & Technology

1981-05-01

of air quality which the Administrator judges are necessary to protect the public health with an adequate * margin of safety...National secondary ambient air quality standards define levels of air quality which the Admini- strator judges necessary to protect the public welfare...steps to meet Illinois Environmental Protection Agency (IEPA) emission and air quality standards through- out the 1970s. The
Forward Skirt Structural Testing on the Space Launch System (SLS) Program

NASA Technical Reports Server (NTRS)

Lohrer, J. D.; Wright, R. D.

2016-01-01

Structural testing was performed to evaluate heritage forward skirts from the Space Shuttle program for use on the NASA Space Launch System (SLS) program. Testing was needed because SLS ascent loads are 35% higher than Space Shuttle loads. Objectives of testing were to determine margins of safety, demonstrate reliability, and validate analytical models. Testing combined with analysis was able to show heritage forward skirts were acceptable to use on the SLS program.
Prostate Cancer Clinical Trials Group: The University of Michigan Site

DTIC Science & Technology

2011-04-01

monotherapy, 10% of the 41 patients on the mitoxantrone/prednisone second-line arm experienced febrile neutropenia , and 9% of the 56 patients on this...study of the combination (with pegfilgrastim support) experi- enced febrile neutropenia . It is important to note, however, that this margin of safety can...15.9). Thirty-two percent of patients experienced grade 3 of 4 neutropenia , and 11% experienced grade 3 or higher neutropenic infections, including 1

Future coral reef habitat marginality: Temporal and spatial effects of climate change in the Pacific basin

USGS Publications Warehouse

Guinotte, J.M.; Buddemeier, R.W.; Kleypas, J.A.

2003-01-01

Marginal reef habitats are regarded as regions where coral reefs and coral communities reflect the effects of steady-state or long-term average environmental limitations. We used classifications based on this concept with predicted time-variant conditions of future climate to develop a scenario for the evolution of future marginality. Model results based on a conservative scenario of atmospheric CO2 increase were used to examine changes in sea surface temperature and aragonite saturation state over the Pacific Ocean basin until 2069. Results of the projections indicated that essentially all reef locations are likely to become marginal with respect to aragonite saturation state. Significant areas, including some with the highest biodiversity, are expected to experience high-temperature regimes that may be marginal, and additional areas will enter the borderline high temperature range that have experienced significant ENSO-related bleaching in the recent past. The positive effects of warming in areas that are presently marginal in terms of low temperature were limited. Conditions of the late 21st century do not lie outside the ranges in which present-day marginal reef systems occur. Adaptive and acclimative capabilities of organisms and communities will be critical in determining the future of coral reef ecosystems.
Margin-maximizing feature elimination methods for linear and nonlinear kernel-based discriminant functions.

PubMed

Aksu, Yaman; Miller, David J; Kesidis, George; Yang, Qing X

2010-05-01

Feature selection for classification in high-dimensional spaces can improve generalization, reduce classifier complexity, and identify important, discriminating feature "markers." For support vector machine (SVM) classification, a widely used technique is recursive feature elimination (RFE). We demonstrate that RFE is not consistent with margin maximization, central to the SVM learning approach. We thus propose explicit margin-based feature elimination (MFE) for SVMs and demonstrate both improved margin and improved generalization, compared with RFE. Moreover, for the case of a nonlinear kernel, we show that RFE assumes that the squared weight vector 2-norm is strictly decreasing as features are eliminated. We demonstrate this is not true for the Gaussian kernel and, consequently, RFE may give poor results in this case. MFE for nonlinear kernels gives better margin and generalization. We also present an extension which achieves further margin gains, by optimizing only two degrees of freedom--the hyperplane's intercept and its squared 2-norm--with the weight vector orientation fixed. We finally introduce an extension that allows margin slackness. We compare against several alternatives, including RFE and a linear programming method that embeds feature selection within the classifier design. On high-dimensional gene microarray data sets, University of California at Irvine (UCI) repository data sets, and Alzheimer's disease brain image data, MFE methods give promising results.
Sea-level changes and shelf break prograding sequences during the last 400 ka in the Aegean margins: Subsidence rates and palaeogeographic implications

NASA Astrophysics Data System (ADS)

Lykousis, V.

2009-09-01

The subsidence rates of the Aegean margins during the Middle-Upper Pleistocene were evaluated based on new and historical seismic profiling data. High-resolution seismic profiling (AirGun, Sparker and 3.5 kHz) have shown that (at least) four major oblique prograding sequences can be traced below the Aegean marginal slopes at increasing subbottom depths. These palaeo-shelf break glacial delta sediments have been developed during successive low sea-level stands (LST prograding sequences), suggesting continuous and gradual subsidence of the Aegean margins during the last 400 ka. Subsidence rates of the Aegean margins were calculated from the vertical displacement of successive topset-to-foreset transitions (palaeo-shelf break) of the LST prograding sediment sequences. The estimated subsidence rates that were calculated in the active boundaries of the Aegean microplate (North Aegean margins, Gulfs of Patras and Corinth) are high and range from 0.7 to 1.88 m ka -1, while the lowest values (0.34-0.60 m ka -1) are related to the low tectonic and seismic activity margins like the margin of Cyclades plateau. Lower subsidence rates (0.34-0.90 m ka -1) were estimated for the period 146-18 ka BP (oxygen isotopic stages 6-2) and higher (1.46-1.88 m ka -1) for the period from 425 to 250 ka BP (oxygen isotopic stages 12/10-8). A decrease of about 50% of the subduction rates in the Aegean margins was observed during the last 400 ka. During the isotopic stages 8, 10, 11 and 12, almost the 50-60% of the present Aegean Sea was land with extensive drainage systems and delta plains and large lakes in the central and North Aegean. Marine transgression in the North Aegean was rather occurred during the isotopic 9 interglacial period. The estimated palaeomorphology should imply fan delta development and sediment failures in the steep escarpments of the North Aegean margins and high sedimentation rates and turbidite sediment accumulation in the basins. It is deduced that the Black Sea was isolated from the Mediterranean during the Pleistocene prior oxygen isotopic stage 5.
The Role of Probabilistic Design Analysis Methods in Safety and Affordability

NASA Technical Reports Server (NTRS)

Safie, Fayssal M.

2016-01-01

For the last several years, NASA and its contractors have been working together to build space launch systems to commercialize space. Developing commercial affordable and safe launch systems becomes very important and requires a paradigm shift. This paradigm shift enforces the need for an integrated systems engineering environment where cost, safety, reliability, and performance need to be considered to optimize the launch system design. In such an environment, rule based and deterministic engineering design practices alone may not be sufficient to optimize margins and fault tolerance to reduce cost. As a result, introduction of Probabilistic Design Analysis (PDA) methods to support the current deterministic engineering design practices becomes a necessity to reduce cost without compromising reliability and safety. This paper discusses the importance of PDA methods in NASA's new commercial environment, their applications, and the key role they can play in designing reliable, safe, and affordable launch systems. More specifically, this paper discusses: 1) The involvement of NASA in PDA 2) Why PDA is needed 3) A PDA model structure 4) A PDA example application 5) PDA link to safety and affordability.
Minimally Invasive Implantable Fetal Micropacemaker: Mechanical Testing and Technical Refinements

PubMed Central

Zhou, Li; Vest, Adriana N.; Peck, Raymond A.; Sredl, Jonathan P.; Huang, Xuechen; Bar-Cohen, Yaniv; Silka, Michael J.; Pruetz, Jay D.; Chmait, Ramen H.; Loeb, Gerald E.

2016-01-01

This paper discusses the technical and safety requirements for cardiac pacing of a human fetus with heart failure and hydrops fetalis secondary to complete heart block. Engineering strategies to meet specific technical requirements were integrated into a systematic design and implementation consisting of a novel fetal micropacemaker, a percutaneous implantation system, and a sterile package that enables device storage and recharging maintenance in a clinical setting. We further analyzed observed problems on myocardial fixation and pacing lead fatigue previously reported in earlier preclinical trials. This paper describes the technical refinements of the implantable fetal micropacemaker to overcome these challenges. The mechanical performance has been extensively tested to verify the improvement of reliability and safety margins of the implantation system. PMID:27021067
"In situ preparation": new surgical procedure indicated for soft-tissue sarcoma of a lower limb in close proximity to major neurovascular structures.

PubMed

Matsumoto, Seiichi; Kawaguchi, Noriyoshi; Manabe, Jun; Matsushita, Yasushi

2002-02-01

When soft-tissue sarcomas occur near neurovascular structures, preoperative images cannot always reveal the accurate relationship between the tumor and these structures. Therefore, in some patients, neurovascular structures are sacrificed unnecessarily. In other patients, neurovascular structures are preserved with an inappropriate margin, followed by local recurrence. The objective of this study was to evaluate a new surgical method, "in situ preparation" (ISP), which enables the preparation of neurovascular bundles and the intraoperative evaluation of the surgical margin without contamination by tumor cells. With this method, additional procedures, including pasteurization, alcohol soaking, and distilled water soaking of the preserved neurovascular bundle can also be performed to preserve the continuity of vessels. Between April 1992 and December 1998, 18 patients with soft-tissue sarcoma were operated on using ISP. The tumor and neurovascular structure were lifted en bloc from the surgical bed and separated from the field by the use of a vinyl sheet. The consistency of the neurovascular structures was preserved. The tissue block could be freely turned around and the neurovascular structure was separated from the block through the nearest approach. The margin between the tumor and neurovascular structure was evaluated, and an additional procedure, such as pasteurization, alcohol soaking or distilled water soaking, was performed, according to the safety of the surgical margin. Only one patient showed recurrence after ISP. Complications after ISP were arterial occlusion in two patients and nerve palsy in three patients. The main cause of these complications was the long period of pasteurization; modified additional procedures could prevent such complications. ISP is a useful method with which to ensure a safe surgical margin and good functional results.
Spectrally encoded confocal microscopy (SECM) for rapid assessment of breast excision specimens (Conference Presentation)

NASA Astrophysics Data System (ADS)

Brachtel, Elena F.; Johnson, Nicole B.; Huck, Amelia E.; Rice-Stitt, Travis L.; Vangel, Mark G.; Smith, Barbara L.; Tearney, Guillermo J.; Kang, DongKyun

2016-03-01

Unacceptably large percentage (20-40%) of breast cancer lumpectomy patients are required to undergo multiple surgeries when positive margins are found upon post-operative histologic assessment. If the margin status can be determined during surgery, surgeon can resect additional tissues to achieve tumor-free margin, which will reduce the need for additional surgeries. Spectrally encoded confocal microscopy (SECM) is a high-speed reflectance confocal microscopy technology that has a potential to image the entire surgical margin within a short procedural time. Previously, SECM was shown to rapidly image a large area (10 mm by 10 mm) of human esophageal tissue within a short procedural time (15 seconds). When used in lumpectomy, SECM will be able to image the entire margin surface of ~30 cm2 in around 7.5 minutes. SECM images will then be used to determine margin status intra-operatively. In this paper, we present results from a study of testing accuracy of SECM for diagnosing malignant breast tissues. We have imaged freshly-excised breast specimens (N=46) with SECM. SECM images clearly visualized histomorphologic features associated with normal/benign and malignant breast tissues in a similar manner to histologic images. Diagnostic accuracy was tested by comparing SECM diagnoses made by three junior pathologists with corresponding histologic diagnoses made by a senior pathologist. SECM sensitivity and specificity were high, 0.91 and 0.93, respectively. Intra-observer agreement and inter-observer agreement were also high, 0.87 and 0.84, respectively. Results from this study showed that SECM has a potential to accurately determine margin status during breast cancer lumpectomy.
Effects of a blue light-filtering intraocular lens on driving safety in glare conditions.

PubMed

Gray, Rob; Hill, Warren; Neuman, Brooke; Houtman, Diane; Potvin, Richard

2012-05-01

To evaluate whether the previously established benefit of blue light-filtering intraocular lenses (IOLs) when driving in glare conditions is maintained in patients previously implanted with a blue light-filtering toric IOL. Department of Applied Psychology, Arizona State University, Mesa, Arizona, USA. Comparative case series. The study comprised patients with a blue light-filtering toric IOL (test IOL) or an ultraviolet (UV)-only filtering nontoric IOL (control IOL). All patients had good visual acuity and a valid driver's license. While wearing best spherocylindrical correction, patients performed left-turn maneuvers in front of oncoming traffic in a driving simulator. The safety margin was defined as the time to collision less the time taken to turn at an intersection with oncoming traffic. Measures were repeated with a glare source simulating low-angle sun conditions (daytime driving). Of the 33 evaluable patients, 18 had a test IOL and 15 had a control IOL. In the presence of glare, patients with test IOLs had significantly greater safety margins (mean 2.676 seconds ± 0.438 [SD]) than patients with control IOLs (mean 2.179 ± 0.343 seconds) and significantly lower glare susceptibility (P<.05). In no-glare and glare conditions, patients with test IOLs had significantly lower glare susceptibility than patients with control IOLs. The blue light-filtering toric IOL produced a significantly greater reduction in glare disability than the UV-only filtering nontoric IOL and increased the ability of drivers to safely execute left turns in low-sun conditions. Dr. Houtman is an employee of Alcon Laboratories, Inc. No other author has a financial or proprietary interest in any material or method mentioned. Copyright © 2012 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.
From striving to thriving: systems thinking, strategy, and the performance of safety net hospitals.

PubMed

Clark, Jonathan; Singer, Sara; Kane, Nancy; Valentine, Melissa

2013-01-01

Safety net hospitals (SNH) have, on average, experienced declining financial margins and faced an elevated risk of closure over the past decade. Despite these challenges, not all SNHs are weakening and some are prospering. These higher-performing SNHs provide substantial care to safety net populations and produce sustainable financial returns. Drawing on the alternative structural positioning and resource-based views, we explore strategic management as a source of performance differences across SNHs. We employ a mixed-method design, blending quantitative and qualitative data and analysis. We measure financial performance using hospital operating margin and quantitatively evaluate its relationship with a limited set of well-defined structural positions. We further evaluate these structures and also explore the internal resources of SNHs based on nine in-depth case studies developed from site visits and extensive interviews. Quantitative results suggest that structural positions alone are not related to performance. Comparative case studies suggest that higher-performing SNH differ in four respects: (1) coordinating patient flow across the care continuum, (2) engaging in partnerships with other providers, (3) managing scope of services, and (4) investing in human capital. On the basis of these findings, we propose a model of strategic action related to systems thinking--the ability to see wholes and interrelationships rather than individual parts alone. Our exploratory findings suggest the need to move beyond generic strategies alone and acknowledge the importance of underlying managerial capabilities. Specifically, our findings suggest that effective strategy is a function of both the internal resources (e.g., managers' systems-thinking capability) and structural positions (e.g., partnerships) of organizations. From this perspective, framing resources and positioning as distinct alternatives misses the nuances of how strategic advantage is actually achieved.
Flebogamma® 5% DIF development: rationale for a new option in intravenous immunoglobulin therapy

PubMed Central

Jorquera, J I

2009-01-01

Flebogamma® 5% dual inactivation and filtration (DIF), a new 5% liquid intravenous immunoglobulin with a stability of 2 years when stored at temperatures between 2 and 30°C, has been developed. This new product is the result of the accumulated experience provided by Flebogamma®, with more than 30 million grams administered since 1992 in Europe and the United States, and the implementation of the latest technology to improve Flebogamma® even more by increasing its viral safety margin further. In addition to the specific inactivation stage for Flebogamma® 5% (pasteurization), the new process includes a solvent–detergent treatment and nanofiltration through a Planova filter down to 20 nm. The preparation presents a mean purity of 99·6 ± 0·2% with a correct chromatographic profile. Percentage values of immunoglobulin (Ig)G subclasses are equivalent to the physiological values of normal serum. The content in IgA as well as other possible impurities is very low, and the product presents a mean result of 109 ± 5% in the Fc fragment functionality assay, demonstrating the integrity of the IgG molecule. The functionality is also reflected in neutralization tests carried out against poliomyelitis, diphtheria, measles and vaccinia which, apart from the antibody titres determined by enzyme-linked immunosorbent assay, guarantees that antibodies are capable of reacting against these pathogens. Regarding safety, the combination of multiple methods with capacity to inactivate or remove biological agents which include chemical inactivation, heat inactivation, nanofiltration and precipitations, with very different mechanisms of action, provides Flebogamma® 5% DIF very wide margins of safety regarding to potential pathogens. PMID:19630865
Perceptions of Safety Among LGBTQ People Following the 2016 Pulse Nightclub Shooting.

PubMed

Stults, Christopher B; Kupprat, Sandra A; Krause, Kristen D; Kapadia, Farzana; Halkitis, Perry N

2017-09-01

The goals of this manuscript are two-fold. First, we provide a brief reaction to this journal's "Special Section: Reflections on the Orlando Massacre on its First Anniversary." Second, we present findings from a study on perceptions of safety among LGBTQ individuals following the Pulse shooting. These issues are discussed within the historical context of hate crimes experienced by the LGBTQ population (Herek), media coverage following the shooting (Hancock & Halderman), and the immediate reaction of LGBTQ graduate students to the event (Jackson). Our study sought to examine differences in perceptions of personal and peer safety by race/ethnicity, gender identity, and sexual orientation among a large, diverse sample of LGBTQ people. Findings from our study indicate that there were differences in perceptions of personal safety by gender identity, and differences in perceptions of peer safety by gender identity and sexual orientation. These findings also suggest that subgroups of the LGBTQ community with more marginalized gender and sexual identities (e.g., female, transgender, genderqueer, bisexual, queer respondents) perceived more concerns related to safety, on average, than subgroups with relatively more privilege (e.g., gay, male). Elevated safety concern may exacerbate multiple minority stress burden, a known driver of poor health outcomes among LGBTQ people. These findings are a call to action to healthcare providers to be well informed and trained to provide the appropriate care and counseling referrals that can address the safety-related concerns of LGBTQ individuals in the aftermath of identity-related attacks.
Large and giant hydrocarbon accumulations in the transitional continent-ocean zone

NASA Astrophysics Data System (ADS)

Khain, V. E.; Polyakova, I. D.

2008-05-01

The petroleum resource potential is considered for the Atlantic, West Pacific, and East Pacific types of deepwater continental margins. The most considerable energy resources are concentrated at the Atlantic-type passive margins in the zone transitional to the ocean. The less studied continental slope of backarc seas of the generally active margins of the West Pacific type is currently not so rich in discoveries as the Atlantic-type margin, but is not devoid of certain expectations. In some of their parameters, the margins bounded by continental slopes may be regarded as analogs of classical passive margins. At the margins of the East Pacific type, the petroleum potential is solely confined to transform segments. In the shelf-continental-slope basins of the rift and pull-apart nature, petroleum fields occur largely in the upper fan complex, and to a lesser extent in the lower graben (rift) complex. In light of world experience, the shelf-continental-slope basins of the Arctic and Pacific margins of Russia are evaluated as highly promising.
Comparison of marginal accuracy of castings fabricated by conventional casting technique and accelerated casting technique: an in vitro study.

PubMed

Reddy, S Srikanth; Revathi, Kakkirala; Reddy, S Kranthikumar

2013-01-01

Conventional casting technique is time consuming when compared to accelerated casting technique. In this study, marginal accuracy of castings fabricated using accelerated and conventional casting technique was compared. 20 wax patterns were fabricated and the marginal discrepancy between the die and patterns were measured using Optical stereomicroscope. Ten wax patterns were used for Conventional casting and the rest for Accelerated casting. A Nickel-Chromium alloy was used for the casting. The castings were measured for marginal discrepancies and compared. Castings fabricated using Conventional casting technique showed less vertical marginal discrepancy than the castings fabricated by Accelerated casting technique. The values were statistically highly significant. Conventional casting technique produced better marginal accuracy when compared to Accelerated casting. The vertical marginal discrepancy produced by the Accelerated casting technique was well within the maximum clinical tolerance limits. Accelerated casting technique can be used to save lab time to fabricate clinical crowns with acceptable vertical marginal discrepancy.
Large-scale Mass Transport Deposits in the Valencia Basin (Western Mediterranean): slope instability induced by rapid sea-level drawdown?

NASA Astrophysics Data System (ADS)

Cameselle, Alejandra L.; Urgeles, Roger; Llopart, Jaume

2014-05-01

The Messinian Salinity Crisis (MSC) strongly affected the physiography of the Mediterranean margins at the end of the Miocene. The sharp sea-level fall gave a new configuration to the Mediterranean basin and created dramatic morphological and sedimentological changes: margins have been largely eroded whereas the deep basins accumulated thick evaporitic and detrital units. Amongst these detrital units, there are evidences on seismic reflection data for major large-scale slope failure of the Mediterranean continental margins. About 2700 km of seismic reflection profiles in the southwestern part of the Valencia Basin (Western Mediterranean) have enabled us the detailed mapping of distinctive Messinian erosional surfaces, evaporites and deep detrital deposits. The detrital deposits occur in a distinct unit that is made of chaotic, roughly-bedded or transparent seismic bodies, which have been mainly mapped in the basin domain. Locally, the seismic unit shows discontinuous high-amplitude reflections and/or an imbricate internal structure. This unit is interpreted to be formed by a series of Mass Transport Deposits (MTDs). Rapid drawdown has long been recognized as one of the most severe loadings conditions that a slope can be subjected to. Several large historical slope failures have been documented to occur due to rapid drawdown in dams, riverbanks and slopes. During drawdown, the stabilizing effect of the water on the upstream face is lost, but the pore-water pressures within the slope may remain high. The dissipation of these pore pressures in the slope is controlled by the permeability and the storage characteristics of the slope sediments. We hypothesize that the MTDs observed in our data formed under similar conditions and represent a large-scale equivalent of this phenomenon. Therefore, these MTDs can be used to put some constraints on the duration of the drawdown phase of the MSC. We have performed a series of slope stability analysis under rapid Messinian sea-level drawdown using slope geotechnical properties and pre-conditioning factors related to the geological setting of the Valencia Basin. Using several sea-level fall ratios, the variation of the safety factor with respect to successive positions of the sea-level during drawdown has been evaluated.
Evidence for submarine landslides and continental slope erosion related to fault reactivation during the last glaciation offshore eastern Canada

NASA Astrophysics Data System (ADS)

Saint-Ange, F.; Campbell, C.; MacKillop, K.; Mosher, D. C.; Piper, D. J.; Roger, J.

2012-12-01

Many studies have proposed that reactivation of dormant faults during deglaciation is a source of neotectonic activity in glaciated regions, but few have demonstrated the relationship to submarine landslides. In this study, seabed morphology and shallow geology of the outer continental margin adjacent to the Charlie Gibbs Fracture Zone off Newfoundland, Canada was investigated for evidence of this relationship. The glacial history and morphology of the margin suggest that the entire continental shelf in the area, coincident with major continental crustal lineaments, was ice-covered during the Last glacial cycle, and transverse troughs delineate the paleo-icestream drainage patterns. A recent investigation of Notre Dame Trough revealed the existence of large sediment failures on the shelf. The current study investigates complex seafloor erosion and widespread mass transport deposition (MTD) on the continental slope seaward of Notre Dame Trough, using recently-acquired high resolution seismic reflection data and piston cores. The new data reveal that a trough mouth fan (TMF) is present on the slope seaward of Notre Dame Trough. The Notre Dame TMF is characterized by a succession of stacked debris flows, but does not show a lobate shape in plan view like other classic TMFs. Instead, the Notre Dame TMF has abruptly-truncated margins suggesting post-depositional failure and erosion of the fan deposits. Seismic reflection data show that the locations of the failures along the TMF margin are coincident with a set of shallow faults; however the current dataset does not image the deeper portion of the faults. On the upper slope immediately south of the TMF, a narrow and deeply incised canyon is located along-trend with the Notre Dame Trough. The location of this canyon appears to be controlled by a fault. Downslope from this canyon, along the southern margin of the TMF, a 25 km wide, flat-floored, U-shaped valley was eroded into a succession of stacked MTD-filled channels. Seismic stratigraphic analysis shows that the valley developed around the same time as the adjacent TMF, however, the valley morphology and evidence for repeated slope failure suggests that the processes responsible for its formation were different than the processes that formed the nearby TMF. Age control provided from piston cores suggest that the last major slope failure that contributed to valley formation probably occurred at ~29 ka. Geotechnical measurements from piston cores show slightly underconsolidated sediments. The results indicate that this part of the margin is more unstable than Orphan Basin and Labrador slope regions. Given the low factor of safety and the complex fault system, low energy earthquake from the surrounding area could be enough to potentially trigger landslides.
Reduction of verotoxigenic Escherichia coli by process and recipe optimisation in dry-fermented sausages.

PubMed

Heir, E; Holck, A L; Omer, M K; Alvseike, O; Høy, M; Måge, I; Axelsson, L

2010-07-15

Outbreaks of verotoxigenic Escherichia coli (VTEC) linked to dry-fermented sausages (DFSs) have emphasized the need for DFS manufacturers to introduce measures to obtain enhanced safety and still maintain the sensory qualities of their products. To our knowledge no data have yet been reported on non-O157:H7 VTEC survival in DFS. Here, the importance of recipe and process variables on VTEC (O157:H7 and O103:H25) reductions in two types of DFS, morr and salami, was determined through three statistically designed experiments. Linear regression and ANOVA analyses showed that no single variable had a dominant effect on VTEC reductions. High levels of NaCl, NaNO(2), glucose (low pH) and fermentation temperature gave enhanced VTEC reduction, while high fat and large casing diameter (a(w)) gave the opposite effect. Interaction effects were small. The process and recipe variables showed similar effects in morr and salami. In general, recipes combining high batter levels of salt (NaCl and NaNO(2)) and glucose along with high fermentation temperature that gave DFS with low final pH and a(w), provided approximately 3 log(10) reductions compared to approximately 1.5 log(10) reductions obtained for standard recipe DFS. Storage at 4 degrees C for 2 months provided log(10) 0.33-0.95 additional VTEC reductions and were only marginally affected by recipe type. Sensory tests revealed only small differences between the various recipes of morr and salami. By optimisation of recipe and process parameters, it is possible to obtain increased microbial safety of DFS while maintaining the sensory qualities of the sausages. 2010 Elsevier B.V. All rights reserved.
Polyphase Rifting and Breakup of the Central Mozambique Margin

NASA Astrophysics Data System (ADS)

Senkans, Andrew; Leroy, Sylvie; d'Acremont, Elia; Castilla, Raymi

2017-04-01

The breakup of the Gondwana supercontinent resulted in the formation of the Central Mozambique passive margin as Africa and Antarctica were separated during the mid-Jurassic period. The identification of magnetic anomalies in the Mozambique Basin and Riiser Larsen Sea means that post-oceanisation plate kinematics are well-constrained. Unresolved questions remain, however, regarding the initial fit, continental breakup process, and the first relative movements of Africa and Antarctica. This study uses high quality multi-channel seismic reflection profiles in an effort to identify the major crustal domains in the Angoche and Beira regions of the Central Mozambique margin. This work is part of the integrated pluri-disciplinary PAMELA project*. Our results show that the Central Mozambique passive margin is characterised by intense but localised magmatic activity, evidenced by the existence of seaward dipping reflectors (SDR) in the Angoche region, as well as magmatic sills and volcanoclastic material which mark the Beira High. The Angoche region is defined by a faulted upper-continental crust, with the possible exhumation of lower crustal material forming an extended ocean-continent transition (OCT). The profiles studied across the Beira high reveal an offshore continental fragment, which is overlain by a pre-rift sedimentary unit likely to belong to the Karoo Group. Faulting of the crust and overlying sedimentary unit reveals that the Beira High has recorded several phases of deformation. The combination of our seismic interpretation with existing geophysical and geological results have allowed us to propose a breakup model which supports the idea that the Central Mozambique margin was affected by polyphase rifting. The analysis of both along-dip and along-strike profiles shows that the Beira High initially experienced extension in a direction approximately parallel to the Mozambique coastline onshore of the Beira High. Our results suggest that the Beira High results from strike-slip deformation localised along a proposed crustal weakness, represented by the Lurio-Pebane shear zone. A more north-south oriented extension is recorded by the continental breakup and oceanisation. A failed rift is initially formed between the Beira High and the African continent followed by the successful rifting of its southern margin. This study proposes a segmentation of the Central Mozambique margin, with oceanisation first occurring in the Angoche segment. The formation of the first oceanic crust in the Beira segment followed, likely delayed by the formation and failure of the northern Beira High rift. *The PAMELA project (PAssive Margin Exploration Laboratories) is a scientific project led by Ifremer and TOTAL in collaboration with Université Rennes 1, Université Pierre and Marie Curie, Université de Bretagne Occidentale, CNRS and IFPEN.
Chapter 34: Geology and petroleum potential of the rifted margins of the Canada Basin

USGS Publications Warehouse

Houseknecht, D.W.; Bird, K.J.

2011-01-01

Three sides of the Canada Basin are bordered by high-standing, conjugate rift shoulders of the Chukchi Borderland, Alaska and Canada. The Alaska and Canada margins are mantled with thick, growth-faulted sediment prisms, and the Chukchi Borderland contains only a thin veneer of sediment. The rift-margin strata of Alaska and Canada reflect the tectonics and sediment dispersal systems of adjacent continental regions whereas the Chukchi Borderland was tectonically isolated from these sediment dispersal systems. Along the eastern Alaska-southern Canada margin, termed herein the 'Canning-Mackenzie deformed margin', the rifted margin is deformed by ongoing Brooks Range tectonism. Additional contractional structures occur in a gravity fold belt that may be present along the entire Alaska and Canada margins of the Canada Basin. Source-rock data inboard of the rift shoulders and regional palaeogeographic reconstructions suggest three potential source-rock intervals: Lower Cretaceous (Hauterivian-Albian), Upper Cretaceous (mostly Turonian) and Lower Palaeogene. Burial history modelling indicates favourable timing for generation from all three intervals beneath the Alaska and Canada passive margins, and an active petroleum system has been documented in the Canning-Mackenzie deformed margin. Assessment of undiscovered petroleum resources indicates the greatest potential in the Canning-Mackenzie deformed margin and significant potential in the Canada and Alaska passive margins. ?? 2011 The Geological Society of London.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiselyov, V.A.; Sokov, L.M.

The LBB regulatory approach adopted in Russia in 1993 as an extra safety barrier is described for advanced WWER 1000 reactor steamline. The application of LBB concept requires the following additional protections. First, the steamline should be a highly qualified piping, performed in accordance with the applicable regulations and guidelines, carefully screened to verify that it is not subjected to any disqualifying failure mechanism. Second, a deterministic fracture mechanics analysis and leak rate evaluation have been performed to demonstrate that postulated through-wall crack that yields 95 1/min at normal operation conditions is stable even under seismic loads. Finally, it hasmore » been verified that the leak detection systems are sufficiently reliable, diverse and sensitive, and that adequate margins exist to detect a through wall crack smaller than the critical size. The obtained results are encouraging and show the possibility of the application of the LBB case to the steamline of advanced WWER 1000 reactor.« less
Magnetic Resonance-Guided High Intensity Focused Ultrasound Ablation of Breast Cancer.

PubMed

Knuttel, Floortje M; van den Bosch, Maurice A A J

2016-01-01

This chapter describes several aspects of MR-HIFU treatment for breast cancer. The current and future applications, technical developments and clinical results are discussed. MR-HIFU ablation is under investigation for the treatment of breast cancer, but is not yet ready for clinical implementation. Firstly, the efficacy of MR-HIFU ablation should be investigated in large trials. The existing literature shows that results of initial, small studies are moderate, but opportunities for improvement are available. Careful patient selection, taking treatment margins into account and using a dedicated breast system might improve treatment outcomes. MRI-guidance has proven to be beneficial for the accuracy and safety of HIFU treatments because of its usefulness before, during and after treatments. In conclusion, MR-HIFU is promising for the treatment of breast cancer and might lead to a change in breast cancer care in the future.

A Preliminary Foil Gas Bearing Performance Map

NASA Technical Reports Server (NTRS)

DellaCorte, Christopher; Radil, Kevin C.; Bruckner, Robert J.; Howard, S. Adam

2006-01-01

Recent breakthrough improvements in foil gas bearing load capacity, high temperature tribological coatings and computer based modeling have enabled the development of increasingly larger and more advanced Oil-Free Turbomachinery systems. Successful integration of foil gas bearings into turbomachinery requires a step wise approach that includes conceptual design and feasibility studies, bearing testing, and rotor testing prior to full scale system level demonstrations. Unfortunately, the current level of understanding of foil gas bearings and especially their tribological behavior is often insufficient to avoid developmental problems thereby hampering commercialization of new applications. In this paper, a new approach loosely based upon accepted hydrodynamic theory, is developed which results in a "Foil Gas Bearing Performance Map" to guide the integration process. This performance map, which resembles a Stribeck curve for bearing friction, is useful in describing bearing operating regimes, performance safety margins, the effects of load on performance and limiting factors for foil gas bearings.
A Computational Framework to Control Verification and Robustness Analysis

NASA Technical Reports Server (NTRS)

Crespo, Luis G.; Kenny, Sean P.; Giesy, Daniel P.

2010-01-01

This paper presents a methodology for evaluating the robustness of a controller based on its ability to satisfy the design requirements. The framework proposed is generic since it allows for high-fidelity models, arbitrary control structures and arbitrary functional dependencies between the requirements and the uncertain parameters. The cornerstone of this contribution is the ability to bound the region of the uncertain parameter space where the degradation in closed-loop performance remains acceptable. The size of this bounding set, whose geometry can be prescribed according to deterministic or probabilistic uncertainty models, is a measure of robustness. The robustness metrics proposed herein are the parametric safety margin, the reliability index, the failure probability and upper bounds to this probability. The performance observed at the control verification setting, where the assumptions and approximations used for control design may no longer hold, will fully determine the proposed control assessment.
Contrast media controversies in 2015: imaging patients with renal impairment or risk of contrast reaction.

PubMed

Davenport, Matthew S; Cohan, Richard H; Ellis, James H

2015-06-01

The incidence and significance of complications related to intravascular contrast material administration have become increasingly controversial. This review will highlight current thinking regarding the imaging of patients with renal impairment and those at risk for an allergiclike contrast reaction. The risk of contrast-induced acute kidney injury remains uncertain for patients with an estimated glomerular filtration rate (GFR) less than 45 mL/min/1.73 m(2), but if there is a risk, it is greatest in those with estimated GFR less than 30 mL/min/1.73 m(2). In this population, low-risk gadolinium-based contrast agents appear to have a large safety margin. Corticosteroid prophylaxis remains the standard of care in the United States for patients identified to be at high risk of a contrast reaction, but it has an incomplete mitigating effect on contrast reaction rates and the number needed to treat is large.
Treatment of Fever After Stroke: Conflicting Evidence

PubMed Central

Wrotek, Sylwia E.; Kozak, Wieslaw E.; Hess, David C.; Fagan, Susan C.

2014-01-01

Approximately 50% of patients hospitalized for stroke develop fever. In fact, experimental evidence suggests that high body temperature is significantly correlated to initial stroke severity, lesion size, mortality, and neurologic outcome. Fever occurring after stroke is associated with poor outcomes. We investigated the etiology of fever after stroke and present evidence evaluating the efficacy and safety of interventions used to treat stroke-associated fever. Oral antipyretics are only marginally effective in lowering elevated body temperature in this population and may have unintended adverse consequences. Nonpharmacologic approaches to cooling have been more effective in achieving normothermia, but whether stroke outcomes can be improved remains unclear. We recommend using body temperature as a biomarker and a catalyst for aggressive investigation for an infectious etiology. Care must be taken not to exceed the new standard of a maximum acetaminophen does of 3 g/day to avoid patient harm. PMID:22026396
Pharmacological targeting of exercise adaptations in skeletal muscle: Benefits and pitfalls.

PubMed

Weihrauch, Martin; Handschin, Christoph

2018-01-01

Exercise exerts significant effects on the prevention and treatment of many diseases. However, even though some of the key regulators of training adaptation in skeletal muscle have been identified, this biological program is still poorly understood. Accordingly, exercise-based pharmacological interventions for many muscle wasting diseases and also for pathologies that are triggered by a sedentary lifestyle remain scarce. The most efficacious compounds that induce muscle hypertrophy or endurance are hampered by severe side effects and are classified as doping. In contrast, dietary supplements with a higher safety margin exert milder outcomes. In recent years, the design of pharmacological agents that activate the training program, so-called "exercise mimetics", has been proposed, although the feasibility of such an approach is highly debated. In this review, the most recent insights into key regulatory factors and therapeutic approaches aimed at leveraging exercise adaptations are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.
Structural design, analysis, and modal testing of the petite amateur navy satellite (PANSAT)

NASA Astrophysics Data System (ADS)

Sakoda, Daniel J.

1992-09-01

The Naval Postgraduate School's (NPS) Space Systems Academic Group is developing the Petite Amateur Navy Satellite (PANSAT), a small satellite for digital store-and-forward communication in the amateur frequency band. PANSAT is intended to be a payload of opportunity amendable to a number of launch vehicles. The Shuttle Small Self-Contained Payload (SSCP) program was chosen as a design baseline because of its high margins of safety as a manned system. The PANSAT structure design is presented for the launch requirements of a Shuttle SSCP. A finite element model was developed and studied for the design loads of a SSCP. The results showed the structure to be very robust and likely to accommodate the requirements of other launch vehicles. The finite element analysis was verified by model testing, correlating the fundamental mode of the finite element model with that of an engineering test structure.
Possible endocrine disrupting effects of parabens and their metabolites.

PubMed

Boberg, Julie; Taxvig, Camilla; Christiansen, Sofie; Hass, Ulla

2010-09-01

Parabens are preservatives used in a wide range of cosmetic products, including products for children, and some are permitted in foods. However, there is concern for endocrine disrupting effects. This paper critically discusses the conclusions of recent reviews and original research papers and provides an overview of studies on toxicokinetics. After dermal uptake, parabens are hydrolyzed and conjugated and excreted in urine. Despite high total dermal uptake of paraben and metabolites, little intact paraben can be recovered in blood and urine. Paraben metabolites may play a role in the endocrine disruption seen in experimental animals and studies are needed to determine human levels of parabens and metabolites. Overall, the estrogenic burden of parabens and their metabolites in blood may exceed the action of endogenous estradiol in childhood and the safety margin for propylparaben is very low when comparing worst-case exposure to NOAELs from experimental studies in rats and mice. Copyright 2010 Elsevier Inc. All rights reserved.
Live Attenuated Influenza Vaccines by Computer-Aided Rational Design

PubMed Central

Mueller, Steffen; Coleman, J. Robert; Papamichail, Dimitris; Ward, Charles B.; Nimnual, Anjaruwee; Futcher, Bruce; Skiena, Steven; Wimmer, Eckard

2010-01-01

Influenza claims 250,000 - 500,000 lives annually worldwide. Despite existing vaccines and enormous efforts in biomedical research, these staggering numbers have not changed significantly over the last two decades1, motivating the search for new, more effective, vaccines that can be rapidly designed and easily produced. Using influenza virus strain A/PR/8/34, we describe a systematic, rational approach, termed Synthetic Attenuated Virus Engineering (SAVE), to develop new, efficacious live attenuated influenza virus vaccine candidates through genome-scale changes in codon pair bias. Attenuation is based on many hundreds of nucleotide changes across the viral genome, offering high genetic stability and a wide margin of safety. The method can be applied rapidly to any emerging influenza virus in its entirety, an advantage that is significant for dealing with seasonal epidemics and pandemic threats, such as H5N1- or 2009-H1N1 influenza. PMID:20543832
Nanowire NMOS Logic Inverter Characterization.

PubMed

Hashim, Yasir

2016-06-01

This study is the first to demonstrate characteristics optimization of nanowire N-Channel Metal Oxide Semiconductor (NW-MOS) logic inverter. Noise margins and inflection voltage of transfer characteristics are used as limiting factors in this optimization. A computer-based model used to produce static characteristics of NW-NMOS logic inverter. In this research two circuit configuration of NW-NMOS inverter was studied, in first NW-NMOS circuit, the noise margin for (low input-high output) condition was very low. For second NMOS circuit gives excellent noise margins, and results indicate that optimization depends on applied voltage to the inverter. Increasing gate to source voltage with (2/1) nanowires ratio results better noise margins. Increasing of applied DC load transistor voltage tends to increasing in decreasing noise margins; decreasing this voltage will improve noise margins significantly.
Similar effects of substance P on learning and memory function between hippocampus and striatal marginal division

PubMed Central

Yu, Yan; Zeng, Changchun; Shu, Siyun; Liu, Xuemei; Li, Chuhua

2014-01-01

Substance P is an endogenous neurokinin that is present in the central and peripheral nervous systems. The neuropeptide substance P and its high-affinity receptor neurokinin 1 receptor are known to play an important role in the central nervous system in inflammation, blood pressure, motor behavior and anxiety. The effects of substance P in the hippocampus and the marginal division of the striatum on memory remain poorly understood. Compared with the hippocampus as a control, immunofluorescence showed high expression of the substance P receptor, neurokinin 1, in the marginal division of the striatum of normal rats. Unilateral or bilateral injection of an antisense oligonucleotide against neurokinin 1 receptor mRNA in the rat hippocampus or marginal division of the striatum effectively reduced neurokinin 1 receptor expression. Independent of injection site, rats that received this antisense oligonucleotide showed obviously increased footshock times in a Y-maze test. These results indicate that the marginal division of the striatum plays a similar function in learning and memory to the hippocampus, which is a valuable addition to our mechanistic understanding of the learning and memory functions of the marginal division of the striatum. PMID:25206901
Multiple outer-reef tracts along the south Florida bank margin: Outlier reefs, a new windward-margin model

USGS Publications Warehouse

Lidz, Barbara H.; Hine, A.C.; Shinn, Eugene A.; Kindinger, Jack G.

1991-01-01

High-resolution seismic-reflection profiles off the lower Florida Keys reveal a multiple outlier-reef tract system ~0.5 to 1.5 km sea-ward of the bank margin. The system is characterized by a massive, outer main reef tract of high (28 m) unburied relief that parallels the margin and at least two narrower, discontinuous reef tracts of lower relief between the main tract and the shallow bank-margin reefs. The outer tract is ~0.5 to 1 km wide and extends a distance of ~57 km. A single pass divides the outer tract into two main reefs. The outlier reefs developed on antecedent, low-gradient to horizontal offbank surfaces, interpreted to be Pleistocene beaches that formed terracelike features. Radiocarbon dates of a coral core from the outer tract confirm a pre-Holocene age. These multiple outlier reefs represent a new windward-margin model that presents a significant, unique mechanism for progradation of carbonate platforms during periods of sea-level fluctuation. Infilling of the back-reef terrace basins would create new terraced promontories and would extend or "step" the platform seaward for hundreds of metres. Subsequent outlier-reef development would produce laterally accumulating sequences.
Discharge of debris from ice at the margin of the Greenland ice sheet

USGS Publications Warehouse

Knight, P.G.; Waller, R.I.; Patterson, C.J.; Jones, A.P.; Robinson, Z.P.

2002-01-01

Sediment production at a terrestrial section of the ice-sheet margin in West Greenland is dominated by debris released through the basal ice layer. The debris flux through the basal ice at the margin is estimated to be 12-45 m3 m-1 a-1. This is three orders of magnitude higher than that previously reported for East Antarctica, an order of magnitude higher than sites reported from in Norway, Iceland and Switzerland, but an order of magnitude lower than values previously reported from tidewater glaciers in Alaska and other high-rate environments such as surging glaciers. At our site, only negligible amounts of debris are released through englacial, supraglacial or subglacial sediment transfer. Glacio-fluvial sediment production is highly localized, and long sections of the ice-sheet margin receive no sediment from glaciofluvial sources. These findings differ from those of studies at more temperate glacial settings where glaciofluvial routes are dominant and basal ice contributes only a minor percentage of the debris released at the margin. These data on debris flux through the terrestrial margin of an outlet glacier contribute to our limited knowledge of debris production from the Greenland ice sheet.
Hierarchical Marginal Land Assessment for Land Use Planning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kang, Shujiang; Post, Wilfred M; Wang, Dali

2013-01-01

Marginal land provides an alternative potential for food and bioenergy production in the face of limited land resources; however, effective assessment of marginal lands is not well addressed. Concerns over environmental risks, ecosystem services and sustainability for marginal land have been widely raised. The objective of this study was to develop a hierarchical marginal land assessment framework for land use planning and management. We first identified major land functions linking production, environment, ecosystem services and economics, and then classified land resources into four categories of marginal land using suitability and limitations associated with major management goals, including physically marginal land,more » biologically marginal land, environmental-ecological marginal land, and economically marginal land. We tested this assessment framework in south-western Michigan, USA. Our results indicated that this marginal land assessment framework can be potentially feasible on land use planning for food and bioenergy production, and balancing multiple goals of land use management. We also compared our results with marginal land assessment from the Conservation Reserve Program (CRP) and land capability classes (LCC) that are used in the US. The hierarchical assessment framework has advantages of quantitatively reflecting land functions and multiple concerns. This provides a foundation upon which focused studies can be identified in order to improve the assessment framework by quantifying high-resolution land functions associated with environment and ecosystem services as well as their criteria are needed to improve the assessment framework.« less
Operating Without a Safety Net: Gay Male Adolescents and Emerging Adults’ Experiences of Marginalization and Migration, and Implications for Theory of Syndemic Production of Health Disparities

PubMed Central

Bruce, Douglas; Harper, Gary W.

2011-01-01

Health disparities among gay men (HIV, substance use, depression) have been described as a mutually occurring “syndemic” that is socially produced through two overarching dynamics: marginalization and migration. Although the syndemic theory proposes a developmental trajectory, it has been largely based on epidemiological studies of adult gay men and has not been examined using qualitative data from gay male adolescents and emerging adults describing their developmental experience. We conducted interviews with 54 HIV-positive gay and bisexual male adolescents and emerging adults at four sites in the United States. This study provides examples of developmental trajectories that help explain the early onset of socially produced health disparities among some gay male adolescents and emerging adults, but also the development of risk factors that may follow some gay men into adulthood. PMID:21398621
Robotic versus laparoscopic proctectomy for rectal cancer: a meta-analysis.

PubMed

Memon, Sameer; Heriot, Alexander G; Murphy, Declan G; Bressel, Mathias; Lynch, A Craig

2012-07-01

Robot-assisted laparoscopic surgery is being performed more frequently for the minimally invasive management of rectal cancer. The objective of this meta-analysis was to compare the clinical and oncologic safety and efficacy of robot-assisted versus conventional laparoscopic surgery. A search of the Medline and Embase databases was performed for studies that compared clinical or oncologic outcomes of conventional laparoscopic proctectomy with robot-assisted laparoscopic proctectomy for rectal cancer. The methodological quality of the selected studies was critically assessed to identify studies suitable for inclusion. Meta-analysis was performed by a random effects model and analyzed by Review Manager. Clinical outcomes evaluated were conversion rates, operation times, length of hospital stay, and complications. Oncologic outcomes evaluated were circumferential margin status, number of lymph nodes collected, and distal resection margin lengths. Eight comparative studies were assessed for quality, and seven studies were included in the meta-analysis. Two studies were matched case-control studies, and five were unmatched. A total of 353 robot-assisted laparoscopic surgery proctectomy cases and 401 conventional laparoscopic surgery proctectomy cases were analyzed. Robotic surgery was associated with a significantly lower conversion rate (P=0.03; 95% confidence interval 1-12). There was no difference in complications, circumferential margin involvement, distal resection margin, lymph node yield, or hospital stay (P=NS). Robot-assisted surgery decreased the conversion rate compared to conventional laparoscopic surgery. Other clinical outcomes and oncologic outcomes were equivalent. The benefits of robotic rectal cancer surgery may differ between population groups.
Why have hydrostatic bearings been avoided as a stabilizing element for rotating machines

NASA Technical Reports Server (NTRS)

Bently, D. E.; Muszynska, A.

1985-01-01

The advantages are discussed of hydrostatic, high pressure bearings as providers of higher margin of stability to the rotor/bearing systems. It is apparent that deliberate use of hydrostatic bearing high pressure lubricated (any gas or liquid) can easily be used to build higher stability margin into rotating machinery, in spite of the thirty years bias against high pressure lubrication. Since this supply pressure is controllable (the Direct Dynamic Stiffness at lower eccentricity is also controllable) so that within some rotor system limits, the stability margin and dynamic response of the rotor system is more readily controllable. It may be possible to take advantage of this effect in the various seals, as well as the bearings, to assist with stability margin and dynamic response of rotating machinery. The stability of the bearing can be additionally improved by taking advantage of the anti-swirling concept. The high pressure fluid supply inlets should be located tangentially at the bearing circumference and directed against rotation. The incoming fluid flow creates stability by reducing the swirling rate.
Structure and degree of magmatism of North and South Atlantic rifted margins

NASA Astrophysics Data System (ADS)

Faleide, Jan Inge; Breivik, Asbjørn J.; Blaich, Olav A.; Tsikalas, Filippos; Planke, Sverre; Mansour Abdelmalak, Mohamed; Mjelde, Rolf; Myklebust, Reidun

2014-05-01

The structure and evolution of conjugate rifted margins in the South and North Atlantic have been studied mainly based on seismic reflection and refraction profiles, complemented by potential field data and plate reconstructions. All margins exhibit distinct along-margin structural and magmatic changes reflecting both structural inheritance extending back to a complex pre-breakup geological history and the final breakup processes. The sedimentary basins at the conjugate margins developed as a result of multiple phases of rifting, associated with complex time-dependent thermal structure of the lithosphere. A series of conjugate crustal transects reveal tectonomagmatic asymmetry, both along-strike and across the conjugate margin systems. The continent-ocean transitional domain along the magma-dominated margin segments is characterized by a large volume of flood basalts and high-velocity/high-density lower crust emplaced during and after continental breakup. Both the volume and duration of excess magmatism varies. The extrusive and intrusive complexes make it difficult to pin down a COB to be used in plate reconstructions. The continent-ocean transition is usually well defined as a rapid increase of P-wave velocities at mid- to lower crustal levels. The transition is further constrained by comparing the mean P-wave velocity to the thickness of the crystalline crust. By this comparison we can also address the magmatic processes associated with breakup, whether they are convection dominated or temperature dominated. In the NE Atlantic there is a strong correlation between magma productivity and early plate spreading rate, suggesting a common cause. A model for the breakup-related magmatism should be able to explain this correlation, but also the magma production peak at breakup, the along-margin magmatic segmentation, and the active mantle upwelling. It is likely that mantle plumes (Iceland in the NE Atlantic, Tristan da Cunha in the South Atlantic) may have influenced the volume of magmatism but they did not necessarily alter the process of rifted margin formation, implying that parts of the margins may have much in common with more magma-poor margins. Conjugate margin segments from the North and South Atlantic will be compared and discussed with particular focus on the tectonomagmatic processes associated with continental breakup.
Coral reef complexes at an atypical windward platform margin: Late Quaternary, southeast Florida

USGS Publications Warehouse

Lidz, B.H.

2004-01-01

Major coral reef complexes rim many modern and ancient carbonate platforms. Their role in margin evolution is not fully understood, particularly when they border a margin atypical of the classic model. Classic windward margins are steeply inclined. The windward margin of southeast Florida is distinct with a very low-gradient slope and a shelf edge ringed with 30-m-high Quaternary outlier reefs on a shallow upper-slope terrace. A newly developed synthesis of temporally well-constrained geologic events is used with surface and subsurface seismic-reflection contours to construct morphogenetic models of four discontinuous reef-complex sequences. The models show uneven subsurface topography, upward and landward buildups, and a previously unreported, rapid, Holocene progradation. The terms backstepped reef-complex margin, backfilled prograded margin, and coalesced reef-complex margin are proposed for sections exhibiting suitable signatures in the stratigraphic record. The models have significant implications for interpretation of ancient analogues. The Florida record chronicles four kinds of geologic events. (1) Thirteen transgressions high enough for marine deposition occurred between ca. 325 ka and the present. Six gave rise to stratigraphically successive coral reef complexes between ca. 185 and ca. 77.8 ka. The seventh reef ecosystem is Holocene. (2) Two primary coral reef architectures built the outer shelf and margin, producing respective ridge-and-swale and reef-and-trough geometries of very different scales. (3) Massive outlier reefs developed on an upper-slope terrace between ca. 106.5 and ca. 80 ka and are inferred to contain corals that would date to highstands at ca. 140 and 125 ka. (4) Sea level remained below elevation of the shelf between ca. 77.8 and ca. 9.6 ka. ?? 2004 Geological Society of America.
Protection of electrical and electronic equipment against lightning indirect effects on the Airbus A340 wing

NASA Technical Reports Server (NTRS)

Spiller, Olaf

1991-01-01

The provisions applied to the Airbus A340 wing wiring against lightning indirect effects are presented. The construction and installation of the wiring's shielding systems are described, and the analysis and tests performed to determine the effectiveness of the measures taken are discussed. A first evaluation of the results of the theoretical analysis together with the provisional results of tests indicate a sufficient safety margin between required and achieved protection levels.
Evaluation of Brazed Joints Using Failure Assessment Diagram

NASA Technical Reports Server (NTRS)

Flom, Yury

2012-01-01

Fitness-for service approach was used to perform structural analysis of the brazed joints consisting of several base metal / filler metal combinations. Failure Assessment Diagrams (FADs) based on tensile and shear stress ratios were constructed and experimentally validated. It was shown that such FADs can provide a conservative estimate of safe combinations of stresses in the brazed joints. Based on this approach, Margins of Safety (MS) of the brazed joints subjected to multi-axial loading conditions can be evaluated..

Surgical Tourniquets in Orthopaedics

DTIC Science & Technology

2009-12-01

occlusion pressure and the ratio of the cuff width to the limb circumference23. This relationship is shown in Figure 4, indicating that, for a given limb...measured limb occlusion pressure to account for physiologic Fig. 3 a: A normal node of Ranvier of a nerve in a limb, showing a nodal gap 1 to 2 mm in ...limb occlusion pressure an additional pressure safety margin that is selected to be greater than the magnitude of any increase in limb occlusion
DOE Office of Scientific and Technical Information (OSTI.GOV)

McDowell, Nate G.; Xu, Chonggang

Plant traits reflect their evolutionary history and influence physiological processes (Reich, 2014). For example, the embolism risk taken by plants, called the embolism safety margin, is a good predictor of stomatal conductance, and hence photosynthesis (Skelton et al., 2015). Trait-science has grown dramatically in the last decade as we have found niversal patterns governing the carbon and nutrient economies of plants (Bloom et al., 1985). Perhaps the greatest value of studying plant functional traits is that they yield understanding of plant functional processes.
DOE Office of Scientific and Technical Information (OSTI.GOV)

McDowell, Nate G.; Xu, Chonggang

Plant traits reflect their evolutionary history and influence physiological processes (Reich 2014). For example, the embolism risk taken by plants, called the embolism safety margin, is a good predictor of stomatal conductance, and hence photosynthesis (Skelton et al. 2015). Trait-science has grown dramatically in the last decade as we have found universal patterns governing the carbon and nutrient economies of plants (Bloom et al. 1985). Perhaps the greatest value of studying plant functional traits is that they yield understanding of plant functional processes.
Human health risk assessment of triclosan in land-applied biosolids.

PubMed

Verslycke, Tim; Mayfield, David B; Tabony, Jade A; Capdevielle, Marie; Slezak, Brian

2016-09-01

Triclosan (5-chloro-2-[2,4-dichlorophenoxy]-phenol) is an antimicrobial agent found in a variety of pharmaceutical and personal care products. Numerous studies have examined the occurrence and environmental fate of triclosan in wastewater, biosolids, biosolids-amended soils, and plants and organisms exposed to biosolid-amended soils. Triclosan has a propensity to adhere to organic carbon in biosolids and biosolid-amended soils. Land application of biosolids containing triclosan has the potential to contribute to multiple direct and indirect human health exposure pathways. To estimate exposures and human health risks from biosolid-borne triclosan, a risk assessment was conducted in general accordance with the methodology incorporated into the US Environmental Protection Agency's Part 503 biosolids rule. Human health exposures to biosolid-borne triclosan were estimated on the basis of published empirical data or modeled using upper-end environmental partitioning estimates. Similarly, a range of published triclosan human health toxicity values was evaluated. Margins of safety were estimated for 10 direct and indirect exposure pathways, both individually and combined. The present risk assessment found large margins of safety (>1000 to >100 000) for potential exposures to all pathways, even under the most conservative exposure and toxicity assumptions considered. The human health exposures and risks from biosolid-borne triclosan are concluded to be de minimis. Environ Toxicol Chem 2016;35:2358-2367. © 2016 SETAC. © 2016 SETAC.
A prospective, split-face, randomized study of the efficacy and safety of a novel fractionated intense pulsed light treatment for melasma in Asians.

PubMed

Yun, Woo Jin; Lee, Sang Min; Han, Ji Su; Lee, Sang Hyung; Chang, Seo Youn; Haw, Sik; Lee, Jung Bok; Won, Chong Hyun; Lee, Mi Woo; Choi, Jee Ho; Chang, Sung Eun

2015-01-01

Intense pulsed light (IPL) has been reported to effectively treat melasma in previous studies, but an aggravation of pigmentation was noted. Fractionated IPL is a novel technique in which microsecond-domain fractionated pulses are delivered to the target area. To compare the safety and efficacy of low-fluency, frequently scheduled fractionated IPL and conventional IPL for melasma treatment. This was a 14-week, split-face study in which 30 Asian women were treated with weekly fractionated IPL on one side of the face and biweekly conventional IPL on the other side. The non-inferiority of a weekly fractionated IPL regimen to a biweekly conventional IPL regimen was verified by a lower margin of the 95% confidence interval for the difference in the Melasma Area and Severity Index (MASI) change from baseline of 2.61 for each side. This value was greater than the previously determined non-inferiority margin of -2.68 (P < 0.025). On the fractionated IPL side, the modified MASI score decreased continuously, but in the conventional IPL group, the MASI score rebounded during the treatment course. Fractionated IPL shows moderate efficacy as a melasma treatment and is therefore a good alternative to conventional IPL as there is no indication of melasma exacerbation. Fractionated IPL can also be used as a maintenance treatment for melasma.
Drought-induced xylem cavitation and hydraulic deterioration: risk factors for urban trees under climate change?

PubMed

Savi, Tadeja; Bertuzzi, Stefano; Branca, Salvatore; Tretiach, Mauro; Nardini, Andrea

2015-02-01

Urban trees help towns to cope with climate warming by cooling both air and surfaces. The challenges imposed by the urban environment, with special reference to low water availability due to the presence of extensive pavements, result in high rates of mortality of street trees, that can be increased by climatic extremes. We investigated the water relations and xylem hydraulic safety/efficiency of Quercus ilex trees growing at urban sites with different percentages of surrounding impervious pavements. Seasonal changes of plant water potential and gas exchange, vulnerability to cavitation and embolism level, and morpho-anatomical traits were measured. We found patterns of increasing water stress and vulnerability to drought at increasing percentages of impervious pavement cover, with a consequent reduction in gas exchange rates, decreased safety margins toward embolism development, and increased vulnerability to cavitation, suggesting the occurrence of stress-induced hydraulic deterioration. The amount of impermeable surface and chronic exposure to water stress influence the site-specific risk of drought-induced dieback of urban trees under extreme drought. Besides providing directions for management of green spaces in towns, our data suggest that xylem hydraulics is key to a full understanding of the responses of urban trees to global change. © 2014 The Authors. New Phytologist © 2014 New Phytologist Trust.
Noise producing toys and the efficacy of product standard criteria to protect health and education outcomes.

PubMed

McLaren, Stuart J; Page, Wyatt H; Parker, Lou; Rushton, Martin

2013-12-19

An evaluation of 28 commercially available toys imported into New Zealand revealed that 21% of these toys do not meet the acoustic criteria in the ISO standard, ISO 8124-1:2009 Safety of Toys, adopted by Australia and New Zealand as AS/NZS ISO 8124.1:2010. While overall the 2010 standard provided a greater level of protection than the earlier 2002 standard, there was one high risk toy category where the 2002 standard provided greater protection. A secondary set of toys from the personal collections of children known to display atypical methods of play with toys, such as those with autism spectrum disorders (ASD), was part of the evaluation. Only one of these toys cleanly passed the 2010 standard, with the remainder failing or showing a marginal-pass. As there is no tolerance level stated in the standards to account for interpretation of data and experimental error, a value of +2 dB was used. The findings of the study indicate that the current standard is inadequate in providing protection against excessive noise exposure. Amendments to the criteria have been recommended that apply to the recently adopted 2013 standard. These include the integration of the new approaches published in the recently amended European standard (EN 71) on safety of toys.
Noise Producing Toys and the Efficacy of Product Standard Criteria to Protect Health and Education Outcomes

PubMed Central

McLaren, Stuart J.; Page, Wyatt H.; Parker, Lou; Rushton, Martin

2013-01-01

An evaluation of 28 commercially available toys imported into New Zealand revealed that 21% of these toys do not meet the acoustic criteria in the ISO standard, ISO 8124-1:2009 Safety of Toys, adopted by Australia and New Zealand as AS/NZS ISO 8124.1:2010. While overall the 2010 standard provided a greater level of protection than the earlier 2002 standard, there was one high risk toy category where the 2002 standard provided greater protection. A secondary set of toys from the personal collections of children known to display atypical methods of play with toys, such as those with autism spectrum disorders (ASD), was part of the evaluation. Only one of these toys cleanly passed the 2010 standard, with the remainder failing or showing a marginal-pass. As there is no tolerance level stated in the standards to account for interpretation of data and experimental error, a value of +2 dB was used. The findings of the study indicate that the current standard is inadequate in providing protection against excessive noise exposure. Amendments to the criteria have been recommended that apply to the recently adopted 2013 standard. These include the integration of the new approaches published in the recently amended European standard (EN 71) on safety of toys. PMID:24452254
Terminal ballistics of the 9mm with Action Safety bullet or Blitz-Action-Trauma (BAT) ammunition.

PubMed

Lantz, P E; Stone, R S; Broudy, D; Morgan, T M

1994-05-01

Specialty ammunition creating atypical gunshot wounds of entrance can create confusion and may be misinterpreted by pathologists unfamiliar with the terminal ballistics of these projectiles. The previously unreported wound ballistics caused by the 9mm with Action Safety bullet described in a homicide highlights the atypical entrance wound(s) and wounding capacity of this novel ammunition. Manufactured by Geco division of Dynamit Nobel, the bullet consists of a nonjacketed solid copper alloy bullet body without a conventional lead core. The large deformation well and part of the smaller central channel is filled with a hard plastic core and post that creates a round nose bullet. The internal ballistics and unique design allow the plastic nose cap and post to separate from the copper alloy base while still in the barrel. The radiolucent nose cap leaves the bullet's path but can still penetrate tissue giving the appearance of a separate but smaller entrance wound. The sharp leading edge of the deformation well and relative high velocity of the bullet body creates a punched out entrance wound with minimal marginal abrasion. When the plastic nose cap or fragments of the plastic post impact the subject, test firings may allow an inference to the muzzle-target distance even in the absence of soot deposition or stippling.
Wavelength dependence of ocular damage thresholds in the near-ir to far-ir transition region: proposed revisions to MPES.

PubMed

Zuclich, Joseph A; Lund, David J; Stuck, Bruce E

2007-01-01

This report summarizes the results of a series of infrared (IR) laser-induced ocular damage studies conducted over the past decade. The studies examined retinal, lens, and corneal effects of laser exposures in the near-IR to far-IR transition region (wavelengths from 1.3-1.4 mum with exposure durations ranging from Q-switched to continuous wave). The corneal and retinal damage thresholds are tabulated for all pulsewidth regimes, and the wavelength dependence of the IR thresholds is discussed and contrasted to laser safety standard maximum permissible exposure limits. The analysis suggests that the current maximum permissible exposure limits could be beneficially revised to (1) relax the IR limits over wavelength ranges where unusually high safety margins may unintentionally hinder applications of recently developed military and telecommunications laser systems; (2) replace step-function discontinuities in the IR limits by continuously varying analytical functions of wavelength and pulsewidth which more closely follow the trends of the experimental retinal (for point-source laser exposures) and corneal ED50 threshold data; and (3) result in an overall simplification of the permissible exposure limits over the wavelength range from 1.2-2.6 mum. A specific proposal for amending the IR maximum permissible exposure limits over this wavelength range is presented.
ACE, Place, Race, and Poverty: Building Hope for Children.

PubMed

Bruner, Charles

Adverse childhood experiences research has focused attention on the importance of family safety, stability, and nurturing in ensuring healthy development. This safety, stability, and nurturing can be compromised by family poverty, discrimination and marginalization, and geographic location. Drawing upon census data, this report shows that place, race, and poverty are intertwined concepts with particular implications for young children. Examining census tracts according to their levels of poverty shows that the poorest census tracts also: 1) are the "richest" in the proportion of young children, 2) have the least realized social, physical, and educational, as well as economic capital, and 3) are highly racially segregated and separated from many sources of economic opportunity. The implications are that the country's poorest neighborhoods require substantially more supports for young children but currently have many fewer. This includes individual services to young children and their families but also publicly available services and voluntary supports, such as parks, playgrounds, and libraries. These data suggest that improving child health trajectories and reducing health disparities according to race and socioeconomic status therefore will require concerted individual service as well as community-building efforts directed to poor and usually racially segregated neighborhoods and communities. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.
Analysis of Loss-of-Coolant Accidents in the NIST Research Reactor - Early Phase

DOE Office of Scientific and Technical Information (OSTI.GOV)

Baek, Joo S.; Diamond, David

A study of the fuel temperature during the early phase of a loss-of-coolant accident (LOCA) in the NIST research reactor (NBSR) was completed. Previous studies had been reported in the preliminary safety analysis report for the conversion of the NBSR from high-enriched uranium (HEU) fuel to low-enriched (LEU) fuel. Those studies had focused on the most vulnerable LOCA situation, namely, a double-ended guillotine break in the time period after reactor trip when water is drained from either the coolant channels inside the fuel elements or the region outside the fuel elements. The current study fills in a gap in themore » analysis which is the early phase of the event when there may still be water present but the reactor is at power or immediately after reactor trip and pumps have tripped. The calculations were done, for both the current HEU-fueled core and the proposed LEU core, with the TRACE thermal-hydraulic systems code. Several break locations and different break sizes were considered. In all cases the increase in the clad (or fuel meat) temperature was relatively small so that a large margin to the temperature threshold for blistering (the Safety Limit for the NBSR) remained.« less
Comparison of Salvage Total Pharyngolaryngectomy and Cervical Esophagectomy Between Hypopharyngeal Cancer and Cervical Esophageal Cancer.

PubMed

Takebayashi, Katsushi; Tsubosa, Yasuhiro; Kamijo, Tomoyuki; Iida, Yoshiyuki; Imai, Atsushi; Nagaoka, Masato; Kitani, Takashi; Niihara, Masahiro; Booka, Eisuke; Shimada, Ayako; Nakagawa, Masahiro; Onitsuka, Tetsuro

2017-03-01

Total pharyngolaryngectomy and cervical esophagectomy (TPLCE) after chemoradiotherapy remains a challenge because of the high rate of complications and few available data on outcomes and safety. The purpose of this study was to evaluate the clinical significance of salvage TPLCE and to compare treatment outcomes between hypopharyngeal cancer and cervical esophageal cancer. Data from 37 consecutive patients who were diagnosed with potentially resectable hypopharyngeal and cervical esophageal cancer after chemoradiotherapy were retrospectively analyzed. The survival and surgical outcomes were investigated between the hypopharyngeal cancer and cervical esophageal cancer groups. Twenty-six patients were included in hypopharyngeal cancer group and 11 patients were included in cervical esophageal cancer group. The baseline characteristics were balanced between the two groups. Compared to the hypopharyngeal cancer group, the cervical esophageal cancer group had significantly more frequent tracheal-related complications (p < 0.05) and stronger association of distal margin of the cervical esophagus and radiation field with tracheal ischemia after salvage surgery. Salvage TPLCE can offer the exclusive chance of prolonged survival. Association of tracheal ischemia with salvage TPLCE was seen more frequently for cervical esophageal cancer. Therefore, the indication for salvage TPLCE must be carefully considered to maintain the balance between curability and safety.
Surgical quality of wedge resection affects overall survival in patients with early stage non-small cell lung cancer.

PubMed

Ajmani, Gaurav S; Wang, Chi-Hsiung; Kim, Ki Wan; Howington, John A; Krantz, Seth B

2018-07-01

Very few studies have examined the quality of wedge resection in patients with non-small cell lung cancer. Using the National Cancer Database, we evaluated whether the quality of wedge resection affects overall survival in patients with early disease and how these outcomes compare with those of patients who receive stereotactic radiation. We identified 14,328 patients with cT1 to T2, N0, M0 disease treated with wedge resection (n = 10,032) or stereotactic radiation (n = 4296) from 2005 to 2013 and developed a subsample of propensity-matched wedge and radiation patients. Wedge quality was grouped as high (negative margins, >5 nodes), average (negative margins, ≤5 nodes), and poor (positive margins). Overall survival was compared between patients who received wedge resection of different quality and those who received radiation, adjusting for demographic and clinical variables. Among patients who underwent wedge resection, 94.6% had negative margins, 44.3% had 0 nodes examined, 17.1% had >5 examined, and 3.0% were nodally upstaged; 16.7% received a high-quality wedge, which was associated with a lower risk of death compared with average-quality resection (adjusted hazard ratio [aHR], 0.74; 95% confidence interval [CI], 0.67-0.82). Compared with stereotactic radiation, wedge patients with negative margins had significantly reduced hazard of death (>5 nodes: aHR, 0.50; 95% CI, 0.43-0.58; ≤5 nodes: aHR, 0.65; 95% CI, 0.60-0.70). There was no significant survival difference between margin-positive wedge and radiation. Lymph nodes examined and margins obtained are important quality metrics in wedge resection. A high-quality wedge appears to confer a significant survival advantage over lower-quality wedge and stereotactic radiation. A margin-positive wedge appears to offer no benefit compared with radiation. Copyright © 2018 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.
The Paget Trial: A Multicenter, Observational Cohort Intervention Study for the Clinical Efficacy, Safety, and Immunological Response of Topical 5% Imiquimod Cream for Vulvar Paget Disease.

PubMed

van der Linden, Michelle; Meeuwis, Kim; van Hees, Colette; van Dorst, Eleonora; Bulten, Johan; Bosse, Tjalling; IntHout, Joanna; Boll, Dorry; Slangen, Brigitte; van Seters, Manon; van Beurden, Marc; van Poelgeest, Mariëtte; de Hullu, Joanne

2017-09-06

Vulvar Paget disease is a rare skin disorder, which is most common in postmenopausal Caucasian women. They usually present with an erythematous plaque that may show fine or typical "cake icing" scaling or ulceration that may cause itching, pain, irritation, or a burning sensation. Although most cases are noninvasive, vulvar Paget disease may be invasive or associated with an underlying vulvar or distant adenocarcinoma. The histological evidence of so-called "Paget cells" with abundant pale cytoplasm in the epithelium confirms the diagnosis. The origin of these Paget cells is still unclear. Treatment of choice is wide local excision with negative margins. Obtaining clear surgical margins is challenging and may lead to extensive and mutilating surgery. Even then, recurrence rates are high, ranging from 15% to 70%, which emphasizes the need for new treatment options. A number of case reports, retrospective case series, and one observational study have shown promising results using the topical immune response modifier imiquimod. This study aims to investigate the efficacy, safety, and immunological response in patients with noninvasive vulvar Paget disease using a standardized treatment schedule with 5% imiquimod cream. Topical 5% imiquimod cream might be an effective and safe treatment alternative for vulvar Paget disease. The Paget Trial is a multicenter observational cohort study including eight tertiary referral hospitals in the Netherlands. It is ethically approved by the Medical-Ethical Committee of Arnhem-Nijmegen and registered in the Central Committee on Research Involving Human Subjects (CCMO) Register by as NL51648.091.14. Twenty patients with (recurrent) noninvasive vulvar Paget disease will be treated with topical 5% imiquimod cream three times a week for 16 weeks. The primary efficacy outcome is the reduction in lesion size at 12 weeks after end of treatment. Secondary outcomes are safety, immunological response, and quality of life. Safety will be assessed by evaluation of adverse events and tolerability of treatment. To evaluate the immunological response, various immunological markers will be tested on biopsy specimens taken before, during, and after treatment. Quality of life will be assessed with three questionnaires taken before, during, and after treatment. First results are expected in the summer of 2018. ClinicalTrials.gov NCT02385188; https://clinicaltrials.gov/ct2/show/NCT02385188 (Archived by WebCite at http://www.webcitation.org/6sXygHuhP). ©Michelle van der Linden, Kim Meeuwis, Colette van Hees, Eleonora van Dorst, Johan Bulten, Tjalling Bosse, Joanna IntHout, Dorry Boll, Brigitte Slangen, Manon van Seters, Marc van Beurden, Mariëtte van Poelgeest, Joanne de Hullu. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 06.09.2017.
Reliability of Hull Girder Ultimate Strength of Steel Ships

NASA Astrophysics Data System (ADS)

Da-wei, Gao; Gui-jie, Shi

2018-03-01

Hull girder ultimate strength is an evaluation index reflecting the true safety margin or structural redundancy about container ships. Especially, after the hull girder fracture accident of the MOL COMFORT, the 8,000TEU class large container ship, on June 17 2013, larger container ship safety has been paid on much more attention. In this paper, different methods of calculating hull girder ultimate strength are firstly discussed and compared with. The bending ultimate strength can be analyzed by nonlinear finite element method (NFEM) and increment-iterative method, and also the shear ultimate strength can be analyzed by NFEM and simple equations. Then, the probability distribution of hull girder wave loads and still water loads of container ship are summarized. At last, the reliability of hull girder ultimate strength under bending moment and shear forces for three container ships is analyzed by using a first order method. The conclusions can be applied to give guidance for ship design and safety evaluation.
Does Health Literacy Level Influence the Effectiveness of a Kiosk-Based Intervention Delivered in the Pediatric Emergency Department?

PubMed

Shields, Wendy C; McDonald, Eileen M; McKenzie, Lara B; Gielen, Andrea C

2016-01-01

This study assesses parents' literacy skills and evaluates how literacy levels influenced the effectiveness of a health communication intervention designed to improve safety knowledge in low-income, urban families. A total of n = 450 parents of children aged 4 to 66 months completed the Rapid Estimate of Adult Literacy in Medicine (REALM) and participated in a randomized trial of an injury prevention intervention delivered via computer kiosk in a pediatric emergency department. A safety knowledge test was administered by telephone 2 to 4 weeks later. More than one-third of parents were assessed by the REALM to have marginal (30%) or inadequate (8%) reading levels; the remaining 62% of parents had adequate reading levels. REALM scores were independently associated with knowledge gains for poison storage and smoke alarms. Participants reading level had an independent and significant effect on safety knowledge outcomes. Literacy level should be considered in all patient education efforts. © The Author(s) 2015.
Subsistence restoration project: Food safety testing. Exxon Valdez Oil Spill Restoration Project. Final report restoration project 94279

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miraglia, R.A.; Chartrand, A.W.

1997-05-01

The goal of this project was to restore the confidence of subsistence users in their abilities to determine the safety of their resources. Methods included community meetings, collection and testing of subsistence resources samples for hydrocarbon contamination, accompanying community representatives on tours of the laboratory where tests were conducted and informational newsletters. Over the two years of the project combined, 228 composite samples of edible tissues from shellfish were tested. The bile of forty rockfish, six sockeye salmon, twelve seals, twenty-three ducks were tested for the presence of hydrocarbon metabolites. Edible tissue (blubber) from seals was also tested. Generally, themore » tests showed such low levels of hydrocarbons and their metabolites, as to be within the test`s margin of error. The project was partly successful in disseminating the subsistence food safety advice of the Oil Spill Health Task Force and in improving the level of trust in the results of hydrocarbon tests on the resources.« less
Tumor margin detection using optical biopsy techniques

NASA Astrophysics Data System (ADS)

Zhou, Yan; Liu, Cheng-hui; Li, Jiyou; Li, Zhongwu; Zhou, Lixin; Chen, Ke; Pu, Yang; He, Yong; Zhu, Ke; Li, Qingbo; Alfano, Robert R.

2014-03-01

The aim of this study is to use the Resonance Raman (RR) and fluorescence spectroscopic technique for tumor margin detection with high accuracy based on native molecular fingerprints of breast and gastrointestinal (GI) tissues. This tumor margins detection method utilizes advantages of RR spectroscopic technique in situ and in real-time to diagnose tumor changes providing powerful tools for clinical guiding intraoperative margin assessments and postoperative treatments. The tumor margin detection procedures by RR spectroscopy were taken by scanning lesion from center or around tumor region in ex-vivo to find the changes in cancerous tissues with the rim of normal tissues using the native molecular fingerprints. The specimens used to analyze tumor margins include breast and GI carcinoma and normal tissues. The sharp margin of the tumor was found by the changes of RR spectral peaks within 2 mm distance. The result was verified using fluorescence spectra with 300 nm, 320 nm and 340 nm excitation, in a typical specimen of gastric cancerous tissue within a positive margin in comparison with normal gastric tissues. This study demonstrates the potential of RR and fluorescence spectroscopy as new approaches with labeling free to determine the intraoperative margin assessment.
Diode laser supported partial nephrectomy in laparoscopic surgery: preliminary results

NASA Astrophysics Data System (ADS)

Sroka, Ronald; Hennig, Georg; Zillinberg, Katja; Khoder, Wael Y.

2011-07-01

Introduction: Warm ischemia and bleeding during laparoscopic partial nephrectomy place technical constraints on surgeons. Therefore it was the aim to develop a safe and effective laser assisted partial nephrectomy technique without need for ischemia. Patients and methods: A diode laser emitting light at 1318nm in cw mode was coupled into a bare fibre (core diameter 600 μm) thus able to transfer up to 100W to the tissue. After dry lab experience, a total of 8 patients suffering from kidney malformations underwent laparoscopic/retroperitoneoscopic partial nephrectomy. Clinically, postoperative renal function and serum c-reactive protein (CRP) were monitored. Laser induced coagulation depth and effects on resection margins were evaluated. Demographic, clinical and follow-up data are presented. Results: Overall interventions, the mean operative time was 116,5 minutes (range 60-175min) with mean blood loss of 238ml (range 50-600ml) while laser assisted resection of the kidney tissue took max 15min. After extirpation of the tumours all patients showed clinical favourable outcome during follow up period. The tumour size was measured to be 1.8 to 5cm. With respect to clinical safety and due to blood loos, two warm ischemia (19 and 24min) must be performed. Immediate postoperative serum creatinine and CRP were elevated within 0.1 to 0.6 mg/dl (mean 0.18 mg/dl) and 2.1-10 mg/dl (mean 6.24 mg/dl), respectively. The depth of the coagulation on the removed tissue ranged between <1 to 2mm without effect on histopathological evaluation of tumours or resection margin. As the surface of the remaining kidney surface was laser assisted coagulated after removal. The sealing of the surface was induced by a slightly larger coagulation margin, but could not measured so far. Conclusion: This prospective in-vivo feasibility study shows that 1318nm-diode laser assisted partial nephrectomy seems to be a safe and promising medical technique which could be provided either during open surgery as well as laparascopically. This application showed good haemostasis and minimal parenchymal damage. Oncological safety appears to be warranted by the use of diode laser. Further investigations and development are needed for on-line detection of the remain coagulation margin, optimisation of the treatment equipment, and finally to train the application technique.

Radiotherapy beyond cancer: Target localization in real-time MRI and treatment planning for cardiac radiosurgery

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ipsen, S.; Blanck, O.; Rades, D.

2014-12-15

Purpose: Atrial fibrillation (AFib) is the most common cardiac arrhythmia that affects millions of patients world-wide. AFib is usually treated with minimally invasive, time consuming catheter ablation techniques. While recently noninvasive radiosurgery to the pulmonary vein antrum (PVA) in the left atrium has been proposed for AFib treatment, precise target location during treatment is challenging due to complex respiratory and cardiac motion. A MRI linear accelerator (MRI-Linac) could solve the problems of motion tracking and compensation using real-time image guidance. In this study, the authors quantified target motion ranges on cardiac magnetic resonance imaging (MRI) and analyzed the dosimetric benefitsmore » of margin reduction assuming real-time motion compensation was applied. Methods: For the imaging study, six human subjects underwent real-time cardiac MRI under free breathing. The target motion was analyzed retrospectively using a template matching algorithm. The planning study was conducted on a CT of an AFib patient with a centrally located esophagus undergoing catheter ablation, representing an ideal case for cardiac radiosurgery. The target definition was similar to the ablation lesions at the PVA created during catheter treatment. Safety margins of 0 mm (perfect tracking) to 8 mm (untracked respiratory motion) were added to the target, defining the planning target volume (PTV). For each margin, a 30 Gy single fraction IMRT plan was generated. Additionally, the influence of 1 and 3 T magnetic fields on the treatment beam delivery was simulated using Monte Carlo calculations to determine the dosimetric impact of MRI guidance for two different Linac positions. Results: Real-time cardiac MRI showed mean respiratory target motion of 10.2 mm (superior–inferior), 2.4 mm (anterior–posterior), and 2 mm (left–right). The planning study showed that increasing safety margins to encompass untracked respiratory motion leads to overlapping structures even in the ideal scenario, compromising either normal tissue dose constraints or PTV coverage. The magnetic field caused a slight increase in the PTV dose with the in-line MRI-Linac configuration. Conclusions: The authors’ results indicate that real-time tracking and motion compensation are mandatory for cardiac radiosurgery and MRI-guidance is feasible, opening the possibility of treating cardiac arrhythmia patients completely noninvasively.« less
Geomorphology and Neogene tectonic evolution of the Palomares continental margin (Western Mediterranean)

NASA Astrophysics Data System (ADS)

Gómez de la Peña, Laura; Gràcia, Eulàlia; Muñoz, Araceli; Acosta, Juan; Gómez-Ballesteros, María; R. Ranero, César; Uchupi, Elazar

2016-10-01

The Palomares continental margin is located in the southeastern part of Spain. The margin main structure was formed during Miocene times, and it is currently part of the wide deformation zone characterizing the region between the Iberian and African plates, where no well-defined plate boundary occurs. The convergence between these two plates is here accommodated by several structures, including the left lateral strike-slip Palomares Fault. The region is characterized by sparse, low to moderate magnitude (Mw < 5.2) shallow instrumental earthquakes, although large historical events have also occurred. To understand the recent tectonic history of the margin we analyze new high-resolution multibeam bathymetry data and re-processed three multichannel seismic reflection profiles crossing the main structures. The analysis of seafloor morphology and associated subsurface structure provides new insights of the active tectonic features of the area. In contrast to other segments of the southeastern Iberian margin, the Palomares margin contains numerous large and comparatively closely spaced canyons with heads that reach near the coast. The margin relief is also characterized by the presence of three prominent igneous submarine ridges that include the Aguilas, Abubacer and Maimonides highs. Erosive processes evidenced by a number of scars, slope failures, gullies and canyon incisions shape the present-day relief of the Palomares margin. Seismic images reveal the deep structure distinguishing between Miocene structures related to the formation of the margin and currently active features, some of which may reactivate inherited structures. The structure of the margin started with an extensional phase accompanied by volcanic accretion during the Serravallian, followed by a compressional pulse that started during the Latemost Tortonian. Nowadays, tectonic activity offshore is subdued and limited to few, minor faults, in comparison with the activity recorded onshore. The deep Algero-Balearic Basin is affected by surficial processes, associated to halokinesis of Messinian evaporites.
The continent-ocean transition at the mid-northern margin of the South China Sea

NASA Astrophysics Data System (ADS)

Gao, Jinwei; Wu, Shiguo; McIntosh, Kirk; Mi, Lijun; Yao, Bochu; Chen, Zeman; Jia, Liankai

2015-07-01

The northern margin of the South China Sea (SCS) has particular structural and stratigraphic characteristics that are somewhat different from those described in typical passive margin models. The differences are attributable to poly-phase tectonic movements and magmatic activity resulting from the interaction among the Eurasian, Philippine Sea and Indo-Australian plates. Based on several crustal-scale multi-channel seismic reflection profiles and satellite gravity data across the northern SCS margin, this paper analyzes the structures, volcanoes and deep crust of the continent-ocean transition zone (COT) at the mid-northern margin of the SCS to study the patterns and model of extension there. The results indicate that the COT is limited landward by basin-bounding faults near Baiyun sag and is bounded by seaward-dipping normal faults near the oceanic basin in our seismic lines. The shallow anatomy of the COT is characterized by rift depression, structural highs with igneous rock and/or a volcanic zone or a zone of tilted fault blocks at the distal edge. Gravity modeling revealed that a high velocity layer (HVL) with a 0.8-6-km thickness is frequently present in the slope below the lower crust. Our study shows that the HVL is only located in the eastern portion of the northern SCS margin based on the available geophysical data. We infer from this that the presence of an HVL is not required in the COT at the northern SCS margin. The magmatic intrusions and HVL may be related to partial melting caused by the decompression of a passive, upwelling asthenosphere, which resulted primarily in post-rifting underplating and magmatic emplacement or modification of the crust. Based on this study, we propose that an intermediate mode of rifting was active in the mid-northern margin of the SCS with characteristics that are closer to those of the magma-poor margins than those of volcanic margins.
Writing Stories, Rewriting Identities: Using Journalism Education and Mobile Technologies to Empower Marginalized High School Students

ERIC Educational Resources Information Center

Cybart-Persenaire, Alena; Literat, Ioana

2018-01-01

This study examines the impact that producing a print newspaper using cell phones had on marginalized students in a high school journalism classroom. Analysis of data from participant observation, artifact analysis and student interviews revealed that a) students negotiated cell phone use for educational purposes, despite school bans on such…
Marginal adaptation of four inlay casting waxes on stone, titanium, and zirconia dies.

PubMed

Michalakis, Konstantinos X; Kapsampeli, Vassiliki; Kitsou, Aikaterini; Kirmanidou, Yvone; Fotiou, Anna; Pissiotis, Argirios L; Calvani, Pasquale Lino; Hirayama, Hiroshi; Kudara, Yukio

2014-07-01

Different inlay casting waxes do not produce copings with satisfactory marginal accuracy when used on different die materials. The purpose of this study was to evaluate the marginal accuracy of 4 inlay casting waxes on stone dies and titanium and zirconia abutments and to correlate the findings with the degree of wetting between the die specimens and the inlay casting waxes. The inlay casting waxes tested were Starwax (Dentaurum), Unterziehwachs (Bredent), SU Esthetic wax (Schuler), and Sculpturing wax (Renfert). The marginal opening of the waxes was measured with a stereomicroscope on high-strength stone dies and on titanium and zirconia abutments. Photographic images were obtained, and the mean marginal opening for each specimen was calculated. A total of 1440 measurements were made. Wetting between die materials and waxes was determined after fabricating stone, titanium, and zirconia rectangular specimens. A calibrated pipette was used to place a drop of molten wax onto each specimen. The contact angle was calculated with software after an image of each specimen had been made with a digital camera. Collected data were subjected to a 2-way analysis of variance (α=.05). Any association between marginal accuracy and wetting of different materials was found by using the Pearson correlation. The wax factor had a statistically significant effect both on the marginal discrepancy (F=158.31, P<.001) and contact angle values (F=68.09, P<.001). A statistically significant effect of the die material factor both on the marginal adaptation (F=503.47, P<.001) and contact angle values (F=585.02, P<.001) was detected. A significant correlation between the marginal accuracy and the contact angle values (Pearson=0.881, P=.01) was also found. Stone dies provided wax copings with the best marginal integrity, followed by titanium and zirconia abutments. Unterziehwachs (Bredent), wax produced the best marginal adaptation on different die materials. A significant correlation was found between the marginal accuracy and the contact angle values. As the contact angle value became smaller, the marginal accuracy improved. All combinations of waxes and stone and titanium dies presented a high wettability. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.
MARGATS cruise: investigation of the deep internal structure and the heterogeneous margins of the Demerara plateau reveals a polyphased volcanic history

NASA Astrophysics Data System (ADS)

Graindorge, D.; Museur, T.; Roest, W. R.; Klingelhoefer, F.; Loncke, L.; Basile, C.; Poetisi, E.; Deverchere, J.; Heuret, A.; Jean-Frederic, L.; Perrot, J.

2017-12-01

The MARGATS scientific cruise was carried out from October 20th to November 16th 2016 on board the R/V L'Atalante, offshore Suriname and French Guiana. This cruise is part of a program dedicated to the geological investigation of the continental margin, including the Demerara plateau, following the GUYAPLAC (2003), IGUANES (2013) and DRADEM (2016) cruises. The aim of MARGATS was to image the internal structure of the Demerara plateau and its different margins using coincident deep penetrating wide angle refraction and multi channel reflection seismic (MCS) methods. During the MARGATS experiment 171 OBS deployments were distributed along 4 wide-angle lines. Along each wide-angle line we also recorded coincident MCS data using a 3 km long 480 channel streamer. The dataset was completed by three MCS lines along the eastern part of the Demerara plateau. MCS MAR007 line which is coincident with line OBS MAR-3 was extended on land by 13 land stations deployed along the Maroni River. This line, together with MCS MAR001 and the coincident OBS MAR-1 line reveal the highly homogeneous deep structure of the internal part of the plateau. MCS MAR005 line, which is coincident with OBS MAR-2, MCS MAR006 line coincident with OBS MAR-4, MCS MAR002, MCS MAR003 and MCS MAR004 helps to elucidate the structural complexity of the northern transform margin and the eastern divergent margin of the plateau. These new datasets are highly complementary to the DRADEM dredge results which provide evidence for mid Jurassic volcanic rocks along the plateau and significant vertical displacements along the transform margin. These results allow to interpret the plateau as the remains of a huge jurassic volcanic divergent margin along the Central Atlantic ocean to the west, possibly remobilized during the cretaceous opening of the Equatorial Atlantic ocean as an highly oblique margin to the north and a divergent margin to the east in persistent presence of volcanism. This AGU session will be a great opportunity to present the exceptional quality of the seismic data, after the initial processing steps and how these data are conditioning a new understanding of the Demarara plateau and its margins which implies the hypothetic role of a new hot spot shaping the complex polyphased history of the structure.
In vivo assessment of high-grade glioma biochemistry using microdialysis: a study of energy-related molecules, growth factors and cytokines.

PubMed

Marcus, Hani J; Carpenter, Keri L H; Price, Stephen J; Hutchinson, Peter J

2010-03-01

Microdialysis enables measurement of the chemistry of the cerebral extracellular fluid. This study's objective was to utilise microdialysis to monitor levels of glucose, lactate, pyruvate, glutamate and glycerol in patients following surgery for intrinsic brain tumours, and to assess the concentration of growth factors, cytokines and other proteins involved in the pathogenesis of high-grade gliomas in vivo. Eight patients with suspected high-grade gliomas were studied. Seven of these underwent resection with one microdialysis catheter placed at the tumour resection margin and, in six of these seven cases, a second microdialysis catheter in macroscopically normal peritumour tissue. The remaining glioma patient had an image-guided biopsy with a single catheter inserted stereotactically at the tumour margin. Histology demonstrated WHO IV glioblastoma in five cases, WHO III anaplastic astrocytoma in two cases, and one cerebral lymphoma. In the high-grade gliomas (WHO IV and III), tumour margin microdialysates consistently showed significantly lower glucose, higher lactate/pyruvate (L/P) ratio, higher glutamate and higher glycerol, relative to peritumour microdialysates (P < 0.05). These results indicate that malignant glioma margin tissue is metabolically extremely active. There was great variability in the microdialysate concentrations of growth factors (TGFalpha, EGF, VEGF), cytokines (IL-1alpha, IL-1beta, IL-1ra, IL-6, IL-8), matrix metalloproteinases (MMP-2, MMP-9) and their endogenous inhibitors (TIMP-1, TIMP-2). Notably, microdialysates from the glioma resection margin demonstrated significantly higher IL-8 concentration and higher MMP-2/TIMP-1 ratio when compared to peritumour microdialysates (P < 0.05), suggesting an environment favouring invasion and angiogenesis at the tumour margin. Microdialysis is a promising technique to study in vivo glioma metabolism, and may assist in the development of new therapies.
In Vitro Evaluation of Sunscreen Safety: Effects of the Vehicle and Repeated Applications on Skin Permeation from Topical Formulations

PubMed Central

Parenti, Carmela

2018-01-01

The evaluation of UV-filter in vitro percutaneous absorption allows the estimation of the systemic exposure dose (SED) and the margin of safety (MoS) of sunscreen products. As both the vehicle and pattern of application may affect sunscreen safety and efficacy, we evaluated in vitro release and skin permeation of two widely used UV-filters, octylmethoxycinnamate (OMC) and butylmethoxydibenzoylmethane (BMBM) from topical formulations with different features (oil in water (O/W) emulsions with different viscosity, water in oil (W/O) emulsion, oils with different lipophilicity). To mimic in-use conditions, we carried out experiments repeating sunscreen application on the skin surface for three consecutive days. BMBM release from all these vehicles was very low, thus leading to poor skin permeation. The vehicle composition significantly affected OMC release and skin permeation, and slight increases of OMC permeation were observed after repeated applications. From skin permeation data, SED and MoS values of BMBM and OMC were calculated for all the investigated formulations after a single application and repeated applications. While MoS values of BMBM were always well beyond the accepted safety limit, the safety of sunscreen formulations containing OMC may depend on the vehicle composition and the application pattern. PMID:29495452
Occupational health and safety services for immigrant workers in Japanese workplaces.

PubMed

Uchino, Asuka; Muto, Takashi; Muto, Shigeki

2010-01-01

The objective of this study was to clarify the status of occupational health and safety services for immigrant workers, the barriers to employing immigrant workers and the needs of the managers in workplaces to keep immigrant workers healthy and safe. This study was a cross-sectional survey. We sent self-administered questionnaires to 126 workplaces in the western part of Shizuoka Prefecture, Japan in August 2006. The questionnaire included the characteristics of the workplace, barriers to employing immigrant workers, current actions to keep immigrant workers healthy and safe, the implementation rate of health checkups and important issues to keep immigrant workers healthy and safe. Implementation rates of health and safety education, creating job instruction manuals written in their native languages, creating safety signs written in their native languages, and the use of translators were 62.5%, 50.0%, 41.1% and 37.5%, respectively. Implementation rates of general health checkups, special health checkups and follow up after health checkups were 80.8%, 73.6% and 67.3%, respectively. The most important issue which the managers considered kept immigrant workers healthy and safe was health checkups (69.6%). In conclusion, several occupational health and safety services were conducted for immigrant workers without a margin to compare with Japanese workers.
Data Analysis Approaches for the Risk-Informed Safety Margins Characterization Toolkit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mandelli, Diego; Alfonsi, Andrea; Maljovec, Daniel P.

2016-09-01

In the past decades, several numerical simulation codes have been employed to simulate accident dynamics (e.g., RELAP5-3D, RELAP-7, MELCOR, MAAP). In order to evaluate the impact of uncertainties into accident dynamics, several stochastic methodologies have been coupled with these codes. These stochastic methods range from classical Monte-Carlo and Latin Hypercube sampling to stochastic polynomial methods. Similar approaches have been introduced into the risk and safety community where stochastic methods (such as RAVEN, ADAPT, MCDET, ADS) have been coupled with safety analysis codes in order to evaluate the safety impact of timing and sequencing of events. These approaches are usually calledmore » Dynamic PRA or simulation-based PRA methods. These uncertainties and safety methods usually generate a large number of simulation runs (database storage may be on the order of gigabytes or higher). The scope of this paper is to present a broad overview of methods and algorithms that can be used to analyze and extract information from large data sets containing time dependent data. In this context, “extracting information” means constructing input-output correlations, finding commonalities, and identifying outliers. Some of the algorithms presented here have been developed or are under development within the RAVEN statistical framework.« less
LANL Skid Testing Summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickson, Peter

2014-04-09

Our improved understanding of the processes occurring during complex drop / skid events has explained the previously observed scatter in skid and drop test data, and provided new insights into effective mitigation strategies. However, it has been perceived to undermine our current safety assumptions, which is inaccurate. We have no reason to believe that our safety margin from HEVR (the event of concern) is any different to that previously assumed – we just have a much better experimental and theoretical basis by which to measure it more accurately. Until this work is complete or, at least, more mature, we cannotmore » draw any conclusions on whether we are more or less safe than we thought, but we know that use of cushioned surfaces, along with sensible housekeeping, mitigates the potential activation of the skid-grit mechanism.« less
Inactivation and removal of influenza A virus H1N1 during the manufacture of plasma derivatives.

PubMed

Jeong, Eun Kyo; Sung, Hark Mo; Kim, In Seop

2010-11-01

Although transmission of pandemic influenza A virus H1N1 2009 is still occurring globally, little has been reported about how this outbreak has affected the safety of plasma derivatives. To evaluate the safety of plasma derivatives, dedicated virus clearance processes used during their production were investigated for their effectiveness in eliminating this virus of recent concern. In this study, influenza A virus H1N1 strain A/NWS/33 (H1N1) was chosen as a surrogate. H1N1 was completely inactivated by fraction IV fractionation as well as pasteurization during the manufacture of albumin. H1N1 was also effectively removed into the precipitate by fraction III fractionation and completely inactivated by low pH incubation as well as pasteurization during the manufacture of intravenous immunoglobulin. H1N1 was completely inactivated within 1 min of solvent/detergent treatment using 0.3% tri (n-butyl) phosphate and 1.0% Triton X-100 and also completely inactivated within 10 min of dry-heat treatment at 98 °C during the manufacture of factor VIII. H1N1 was completely removed by virus filtration process using Viresolve NFP filter and also completely inactivated by pasteurization during the manufacture of anti-thrombin III. These results indicate that all the virus clearance processes commonly used have sufficient H1N1 reducing capacity to achieve a high margin of safety. Copyright © 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.
Efficacy and Safety Outcomes for Originator TNF Inhibitors and Biosimilars in Rheumatoid Arthritis and Psoriasis Trials: A Systematic Literature Review.

PubMed

Moots, Robert J; Curiale, Cinzia; Petersel, Danielle; Rolland, Catherine; Jones, Heather; Mysler, Eduardo

2018-05-22

Regulatory approval of biosimilar versions of originator biotherapeutics requires that new biological products be highly similar to originator products, with no clinically meaningful differences in safety, purity, and potency. In some trials of biosimilars of tumor necrosis factor inhibitors for the treatment of rheumatoid arthritis (RA) and plaque psoriasis (PsO), pre-specified margins for efficacy and safety have been met, but differences in treatment responses between pivotal originator trials and biosimilar trials have been noted. The objective of this systematic review was to examine these differences. Searches were conducted to identify comparative randomized clinical trials of approved or proposed biosimilars of adalimumab, etanercept, and infliximab. Of 83 publications identified, 16 publications were included for analysis (RA: originators, n = 5; biosimilars, n = 6; PsO: originators, n = 2; biosimilars, n = 3). American College of Rheumatology 20% response rates were higher among patients with RA receiving originator biologics and biosimilars in biosimilar trials than among patients receiving the originator biologics in pivotal trials. In etanercept studies in PsO, a difference was observed in Psoriasis Area and Severity Index 75% response rates between biosimilar and pivotal trials. Insufficient efficacy data were available from adalimumab and infliximab biosimilar studies in PsO to determine any differences in treatment responses between pivotal and biosimilar studies. Observed differences in treatment response rates between pivotal originator trials and trials of originator biologics and their respective biosimilars may be attributable to fundamental differences in study design and/or baseline patient characteristics, which require further analysis.
International policy and advisory response regarding children's exposure to radio frequency electromagnetic fields (RF-EMF).

PubMed

Redmayne, Mary

2016-01-01

Radiofrequency electromagnetic field (RF-EMF) exposure regulations/guidelines generally only consider acute effects, and not chronic, low exposures. Concerns for children's exposure are warranted due to the amazingly rapid uptake of many wireless devices by increasingly younger children. This review of policy and advice regarding children's RF-EMF exposure draws material from a wide variety of sources focusing on the current situation. This is not a systematic review, but aims to provide a representative cross-section of policy and advisory responses within set boundaries. There are a wide variety of approaches which I have categorized and tabulated ranging from ICNIRP/IEEE guidelines and "no extra precautions needed" to precautionary or scientific much lower maxima and extensive advice to minimize RF-EMF exposure, ban advertising/sale to children, and add exposure information to packaging. Precautionary standards use what I term an exclusion principle. The wide range of policy approaches can be confusing for parents/carers of children. Some consensus among advisory organizations would be helpful acknowledging that, despite extensive research, the highly complex nature of both RF-EMF and the human body, and frequent technological updates, means simple assurance of long-term safety cannot be guaranteed. Therefore, minimum exposure of children to RF-EMF is recommended. This does not indicate need for alarm, but mirrors routine health-and-safety precautions. Simple steps are suggested. ICNIRP guidelines need to urgently publish how the head, torso, and limbs' exposure limits were calculated and what safety margin was applied since this exposure, especially to the abdomen, is now dominant in many children.
Tissue preservation with mass spectroscopic analysis: Implications for cancer diagnostics.

PubMed

Hall, O Morgan; Peer, Cody J; Figg, William D

2018-05-17

Surgical intervention is a common treatment modality for localized cancer. Post-operative analysis involves evaluation of surgical margins to assess whether all malignant tissue has been resected because positive surgical margins lead to a greater likelihood of recurrence. Secondary treatments are utilized to minimize the negative effects of positive surgical margins. Recently, in Science Translational Medicine, Zhang et al describe a new mass spectroscopic technique that could potentially decrease the likelihood of positive surgical margins. Their nondestructive in vivo tissue sampling leads to a highly accurate and rapid cancer diagnosis with great precision between healthy and malignant tissue. This new tool has the potential to improve surgical margins and accelerate cancer diagnostics by analyzing biomolecular signatures of various tissues and diseases.
A novel probabilistic approach to generating PTV with partial voxel contributions

NASA Astrophysics Data System (ADS)

Tsang, H. S.; Kamerling, C. P.; Ziegenhein, P.; Nill, S.; Oelfke, U.

2017-06-01

Radiotherapy treatment planning for use with high-energy photon beams currently employs a binary approach in defining the planning target volume (PTV). We propose a margin concept that takes the beam directions into account, generating beam-dependent PTVs (bdPTVs) on a beam-by-beam basis. The resulting degree of overlaps between the bdPTVs are used within the optimisation process; the optimiser effectively considers the same voxel to be both target and organ at risk (OAR) with fractional contributions. We investigate the impact of this novel approach when applied to prostate radiotherapy treatments, and compare treatment plans generated using beam dependent margins to conventional margins. Five prostate patients were used in this planning study, and plans using beam dependent margins improved the sparing of high doses to target-surrounding OARs, though a trade-off in delivering additional low dose to the OARs can be observed. Plans using beam dependent margins are observed to have a slightly reduced target coverage. Nevertheless, all plans are able to satisfy 90% population coverage with the target receiving at least 95% of the prescribed dose to D98% .
Two new species of the genus Haplotropis Saussure, 1888 (Orthoptera, Acridoidea, Pamphagidae) from China.

PubMed

Ye, Bao-Hua; Yin, Zhan; Li, Xin-Jiang

2016-06-30

Two new species of the genus Haplotropis Saussure, 1888 from China are described in this paper. The new species Haplotropis xiai sp. nov. is similar to Haplotropis brunneriana Saussure, 1888, but differs from latter by frontal ridge of male widened at median ocellus; tegmina narrower, cover 2/5 tympanum; cercus of male apical half part gently tapering; lower margin of epiphallus with high projection in the middle; anterior margin of pronotum in female with distinct acute angular in middle; length of subgenital plate shorter than width in female. The Haplotropis zhuoluensis sp. nov. is similar to Haplotropis xiai sp. nov., but differs from latter by anterior margin of pronotum reaching hind margin of eyes; length of temina is 1.6 times in male and 1.3 times in female of width; length of interspace shorter than narrowest in mesosternum of male; ancorae of epiphallus oblique inward distinctly, lower margin with high projection in the middle; length of subgenital plate longer than width in female. Type specimens are deposited in the College of Life Sciences, Hebei University, Baoding, China.
Disruption Event Characterization and Forecasting in Tokamaks

NASA Astrophysics Data System (ADS)

Berkery, J. W.; Sabbagh, S. A.; Park, Y. S.; Ahn, J. H.; Jiang, Y.; Riquezes, J. D.; Gerhardt, S. P.; Myers, C. E.

2017-10-01

The Disruption Event Characterization and Forecasting (DECAF) code, being developed to meet the challenging goal of high reliability disruption prediction in tokamaks, automates data analysis to determine chains of events that lead to disruptions and to forecast their evolution. The relative timing of magnetohydrodynamic modes and other events including plasma vertical displacement, loss of boundary control, proximity to density limits, reduction of safety factor, and mismatch of the measured and desired plasma current are considered. NSTX/-U databases are examined with analysis expanding to DIII-D, KSTAR, and TCV. Characterization of tearing modes has determined mode bifurcation frequency and locking points. In an NSTX database exhibiting unstable resistive wall modes (RWM), the RWM event and loss of boundary control event were found in 100%, and the vertical displacement event in over 90% of cases. A reduced kinetic RWM stability physics model is evaluated to determine the proximity of discharges to marginal stability. The model shows high success as a disruption predictor (greater than 85%) with relatively low false positive rate. Supported by US DOE Contracts DE-FG02-99ER54524, DE-AC02-09CH11466, and DE-SC0016614.
Rapid Prototyping of Continuous Fiber Reinforced Ceramic Matrix Composites

NASA Technical Reports Server (NTRS)

Vaidyanathan, R.; Green, C.; Phillips, T.; Cipriani, R.; Yarlagadda, S.; Gillespie, J.; Effinger, M.; Cooper, K. C.; Gordon, Gail (Technical Monitor)

2002-01-01

For ceramics to be used as structural components in high temperature applications, their fracture toughness is improved by embedding continuous ceramic fibers. Ceramic matrix composite (CMC) materials allow increasing the overall operating temperature, raising the temperature safety margins, avoiding the need for cooling, and improving the damping capacity, while reducing the weight at the same time. They also need to be reliable and available in large quantities as well. In this paper, an innovative rapid prototyping technique to fabricate continuous fiber reinforced ceramic matrix composites is described. The process is simple, robust and will be widely applicable to a number of high temperature material systems. This technique was originally developed at the University of Delaware Center for Composite Materials (UD-CCM) for rapid fabrication of polymer matrix composites by a technique called automated tow placement or ATP. The results of mechanical properties and microstructural characterization are presented, together with examples of complex shapes and parts. It is believed that the process will be able to create complex shaped parts at an order of magnitude lower cost than current CVI and PIP processes.
Multi-Sensor Based Online Attitude Estimation and Stability Measurement of Articulated Heavy Vehicles.

PubMed

Zhu, Qingyuan; Xiao, Chunsheng; Hu, Huosheng; Liu, Yuanhui; Wu, Jinjin

2018-01-13

Articulated wheel loaders used in the construction industry are heavy vehicles and have poor stability and a high rate of accidents because of the unpredictable changes of their body posture, mass and centroid position in complex operation environments. This paper presents a novel distributed multi-sensor system for real-time attitude estimation and stability measurement of articulated wheel loaders to improve their safety and stability. Four attitude and heading reference systems (AHRS) are constructed using micro-electro-mechanical system (MEMS) sensors, and installed on the front body, rear body, rear axis and boom of an articulated wheel loader to detect its attitude. A complementary filtering algorithm is deployed for sensor data fusion in the system so that steady state margin angle (SSMA) can be measured in real time and used as the judge index of rollover stability. Experiments are conducted on a prototype wheel loader, and results show that the proposed multi-sensor system is able to detect potential unstable states of an articulated wheel loader in real-time and with high accuracy.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.