high tech control: Topics by Science.gov

Sample records for high tech control

Patient Autonomy in a High-Tech Care Context - A Theoretical Framework.

PubMed

Lindberg, Catharina; Fagerström, Cecilia; Willman, Ania

2018-06-12

To synthesise and interpret previous findings with the aim of developing a theoretical framework for patient autonomy in a high-tech care context. Putting the somewhat abstract concept of patient autonomy into practice can prove difficult since when it is highlighted in healthcare literature the patient perspective is often invisible. Autonomy presumes that a person has experience, education, self-discipline and decision-making capacity. Reference to autonomy in relation to patients in high-tech care environments could therefore be considered paradoxical, as in most cases these persons are vulnerable, with impaired physical and/or metacognitive capacity, thus making extended knowledge of patient autonomy for these persons even more important. Theory development. The basic approaches in theory development by Walker and Avant were used to create a theoretical framework through an amalgamation of the results from three qualitative studies conducted previously by the same research group. A theoretical framework - the control-partnership-transition framework - was delineated disclosing different parts co-creating the prerequisites for patient autonomy in high-tech care environments. Assumptions and propositional statements that guide theory development were also outlined, as were guiding principles for use in day-to-day nursing care. Four strategies used by patients were revealed: the strategy of control, the strategy of partnership, the strategy of trust, and the strategy of transition. An extended knowledge base, founded on theoretical reasoning about patient autonomy, could facilitate nursing care that would allow people to remain/become autonomous in the role of patient in high-tech care environments. The control-partnership-transition framework would be of help in supporting and defending patient autonomy when caring for individual patients, as it provides an understanding of the strategies employed by patients to achieve autonomy in high-tech care contexts. The guiding principles for patient autonomy presented could be used in nursing guidelines. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.
High-Tech Versus High-Touch: Components of Hospital Costs Vary Widely.

PubMed

Song, Paula H; Reiter, Kristin L; Yi Xu, Wendy

The recent release by the Centers for Medicare & Medicaid Services of hospital charge and payment data to the public has renewed a national dialogue on hospital costs and prices. However, to better understand the driving force of hospital pricing and to develop strategies for controlling expenditures, it is important to understand the underlying costs of providing hospital services. We use Medicare Provider and Analysis Review inpatient claims data and Medicare cost report data for fiscal years 2008 and 2012 to examine variations in the contribution of "high-tech" resources (i.e., technology/medical device-intensive resources) versus "high-touch" resources (i.e., labor-intensive resources) to the total costs of providing two common services, as well as assess how these costs have changed over time. We found that high-tech inputs accounted for a greater proportion of the total costs of surgical service, whereas medical service costs were primarily attributable to high-touch inputs. Although the total costs of services did not change significantly over time, the distribution of high-tech, high-touch, and other costs for each service varied considerably across hospitals. Understanding resource inputs and the varying contribution of these inputs by clinical condition is an important first step in developing effective cost control strategies.
Effects of an 8-Week Outdoor Brisk Walking Program on Fatigue in Hi-Tech Industry Employees: A Randomized Control Trial.

PubMed

Wu, Li-Ling; Wang, Kuo-Ming; Liao, Po-I; Kao, Yu-Hsiu; Huang, Yi-Ching

2015-10-01

Over 73% of hi-tech industry employees in Taiwan lack regular exercise. They are exposed to a highly variable and stressful work environment for extended periods of time, and may subsequently experience depression, detrimental to workers' physiological and mental health. In this cross-sectional survey, the authors explored the effect of an 8-week brisk walking program on the fatigue of employees in the hi-tech industry. The participants, from a hi-tech company in northern Taiwan, were randomly assigned to an experimental group (EG; 41 subjects, Mage = 33.34 ± 6.40) or control group (CG; 45 subjects, Mage = 29.40 ± 3.60). Following the 8-week brisk walking program, the EG showed significantly lower scores for subjective fatigue, working motivation, attention, and overall fatigue. The authors confirmed that the 8-week outdoor brisk walking program significantly improved the level of fatigue among employees of the hi-tech industry. The finding serves as an important reference for health authorities in Taiwan and provides awareness of workplace health promotion in the hi-tech industry. © 2015 The Author(s).
Virtual reality helmet display quality influences the magnitude of virtual reality analgesia.

PubMed

Hoffman, Hunter G; Seibel, Eric J; Richards, Todd L; Furness, Thomas A; Patterson, David R; Sharar, Sam R

2006-11-01

Immersive Virtual Reality (VR) distraction can be used in addition to traditional opioids to reduce procedural pain. The current study explored whether a High-Tech-VR helmet (ie, a 60-degree field-of-view head-mounted display) reduces pain more effectively than a Low-Tech-VR helmet (a 35-degree field-of-view head-mounted display). Using a double-blind between-groups design, 77 healthy volunteers (no patients) aged 18-23 were randomly assigned to 1 of 3 groups. Each subject received a brief baseline thermal pain stimulus, and the same stimulus again minutes later while in SnowWorld using a Low-Tech-VR helmet (Group 1), using a High-Tech-VR helmet (Group 2), or receiving no distraction (Group 3, control group). Each participant provided subjective 0-10 ratings of cognitive, sensory, and affective components of pain, and amount of fun during the pain stimulus. Compared to the Low-Tech-VR helmet group, subjects in the High-Tech-VR helmet group reported 34% more reduction in worst pain (P < .05), 46% more reduction in pain unpleasantness (P = .001), 29% more reduction in "time spent thinking about pain" (P < .05), and 32% more fun during the pain stimulus in VR (P < .05). Only 29% of participants in the Low-Tech helmet group, as opposed to 65% of participants in the High-Tech-VR helmet group, showed a clinically significant reduction in pain intensity during virtual reality. These results highlight the importance of using an appropriately designed VR helmet to achieve effective VR analgesia (see ). Pain during medical procedures (eg, burn wound care) is often excessive. Adjunctive virtual reality distraction can substantially reduce procedural pain. The results of the present study show that a higher quality VR helmet was more effective at reducing pain than a lower quality VR helmet.
E-health blood pressure control program.

PubMed

Ahern, David K; Stinson, Lynda J; Uebelacker, Lisa A; Wroblewski, Joseph P; McMurray, Jerome H; Eaton, Charles B

2012-01-01

Both technological and human factors design requirements for integration of home blood pressure monitoring (HBPM) into a patient centered medical home (PCMH) model primary care practice are described. Patients with uncontrolled hypertension were given home blood pressure (BP) monitors, and after a three-month run-in period introduced to either a high-tech only (HBPM connectivity to personal health record and tailored Web portal access) or a high-tech/"high-touch" (high-tech solution plus patient navigator [PN]) solution. Features of the Web portal included: BP graphing function, traffic-light feedback system of BP goal attainment, economic incentives for self-monitoring, and dual patient-facing and care-team-facing dashboard functions. The e-health BP control system with PN support was well received by patients, providers, and the healthcare team. Current e-health technology and limited technological literacy of many patients suggest that a PN or some other personnel resource may be required for the adoption of patient-facing technology in primary care.
Difference of the associations between self-rated health and demographic characteristics, lifestyle, and psychosocial work environment between two types of Chinese worksite.

PubMed

Jia, Yingnan; Gao, Junling; Dai, Junming; Zheng, Pinpin; Wu, Xiaoyu; Li, Guangyao; Fu, Hua

2014-08-15

Although studies of self-rated health (SRH) are conducted widely in developed countries, comprehensive assessments of the determinants of SRH in Chinese are scarce, particularly for working Chinese individuals. Determinants of SRH might differ among worksites based on differences in the nature and stress associated with different jobs, work intensity, and the lifestyles of employees. Two thousand and forty questionnaires that addressed SRH, demographic characteristics, lifestyle, and the psychosocial work environment were administered to employees at two worksites. A total of 1644 subjects provided complete data for analysis (80.6% response rate). Participants from government departments had significantly better SRH than did those from high-tech enterprises (61.1% vs. 67.5%, respectively). Lifestyles were significantly less healthy at government departments compared with high-tech enterprises, whereas the psychosocial work environment was better. The results of unadjusted and adjusted models revealed differences between the potential health-influencing factors of participants based on their type of worksite. In logistic regression models, gender was strongly associated with SRH in all participants, whereas length of service was correlated with SRH only in participants from high-tech enterprises. In high-tech enterprises, good SRH was less common in physically inactive subjects vs. physically active participants (OR = 0.561). In government departments, passive smoking was negatively associated with SRH significantly. Social capital (OR = 1.073) and job control (OR = 1.550) were positively correlated with SRH in high-tech enterprises. Job control was the only psychosocial factor significantly associated with SRH in government departments. Participants from different types of worksite reported different SRH, healthy lifestyles, and psychosocial work environments. Moreover, the association between SRH and demographic characteristics, lifestyle, and the psychosocial work environment significantly differed by type of worksite.
Research on the competitiveness of high-tech industries in northeast China

NASA Astrophysics Data System (ADS)

Liu, Lei; Wang, Yang; Wang, Ming-Quan; Xiao, Yan-Bo; Gao, Ming

2017-06-01

Based on characteristics of high-tech industry in Northeast China, high-tech industry competitiveness index system was developed, and the competitiveness of high-tech industry was evaluated through principal component analysis and location quotient method. The results showed that the scale of high-tech industry in Northeast China as a whole was small, and presented a decreasing trend for the proportion in the country. The competitiveness of high-tech industry in Northeast China lagged far behind that of the eastern and central regions. The high-tech industry competitiveness of Liaoning, Jilin and Heilongjiang provinces in China ranked 15, 19 and 21, respectively. The manufacture of medicine in Jilin province, and the manufacture of aircraft and spacecraft and the related equipment in Liaoning and Heilongjiang provinces had high competitive advantage, but the manufacture of electronic equipment and communication equipment and the manufacture of computers and office equipment was lack of competitiveness. The development suggestions were put forward to improve the competitiveness of high-tech industries in Northeast China.
Increasing Receipt of High-Tech/High-Cost Imaging and Its Determinants in the Last Month of Taiwanese Patients With Metastatic Cancer, 2001-2010: A Retrospective Cohort Study.

PubMed

Liu, Tsang-Wu; Hung, Yen-Ni; Soong, Thomas C; Tang, Siew Tzuh

2015-08-01

One strategy for controlling the skyrocketing costs of cancer care may be to target high-tech/high-cost imaging at the end of life (EOL). This population-based study investigated receipt of high-tech/high-cost imaging and its determinants for Taiwanese patients with metastatic cancer in their last month of life.Individual patient-level data were linked with encrypted identification numbers from computerized administrative data in Taiwan, that is, the National Register of Deaths Database, Cancer Registration System database, and National Health Insurance claims datasets, Database of Medical Care Institutions Status, and national census statistics (population/household income). We identified receipt of computerized tomography (CT), magnetic resonance imaging (MRI), positron emission tomography (PET), and radionuclide bone scans (BSs) for 236,911 Taiwanese cancer decedents with metastatic disease, 2001 to 2010. Associations of patient, physician, hospital, and regional factors with receiving CT, MRI, and bone scan in the last month of life were evaluated by multilevel generalized linear-mixed models.Over one-third (average [range]: 36.11% [33.07%-37.31%]) of patients with metastatic cancer received at least 1 high-tech/high-cost imaging modality in their last month (usage rates for CT, MRI, PET, and BS were 31.05%, 5.81%, 0.25%, and 8.15%, respectively). In 2001 to 2010, trends of receipt increased for CT (27.96-32.22%), MRI (4.34-6.70%), and PET (0.00-0.62%), but decreased for BS (9.47-6.57%). Facilitative determinants with consistent trends for at least 2 high-tech/high-cost imaging modalities were male gender, younger age, married, rural residence, lung cancer diagnosis, dying within 1 to 2 years of diagnosis, not under medical oncology care, and receiving care at a teaching hospital with a larger volume of terminally ill cancer patients and greater EOL care intensity. Undergoing high-tech/high-cost imaging at EOL generally was not associated with regional characteristics, healthcare resources, and EOL care intensity.To more effectively use high-tech/high-cost imaging at EOL, clinical and financial interventions should target nonmedical oncologists/hematologists affiliated with teaching hospitals that tend to aggressively treat high volumes of terminally ill cancer patients, thereby avoiding unnecessary EOL care spending and transforming healthcare systems into affordable high-quality cancer care delivery systems.
Effectiveness of a physical activity program on weight, physical fitness, occupational stress, job satisfaction and quality of life of overweight employees in high-tech industries: a randomized controlled study.

PubMed

Fang, Yun-Ya; Huang, Chien-Yuan; Hsu, Mei-Chi

2018-03-27

This study aimed to examine the effectiveness of a physical activity (PA) program on weight control, physical fitness, occupational stress, job satisfaction and quality of life of overweight and sedentary employees in high-tech industries. Participants in the intervention group (n = 37) were instructed to carry out a PA program at moderate intensity for 60 min/session, 3 sessions/week for 12 weeks. Those in the control group (n = 38) received no PA program and were asked to continue their routine lifestyle. Evaluations were performed at baseline and at the end of the intervention. Results of structured questionnaires and blood biochemistry tests and evaluations of physical fitness were analyzed. The PA program effectively reduced the number of risk factors for metabolic syndrome and body fat percentage, and improved physical fitness such as flexibility, muscular strength and endurance and cardiorespiratory endurance. The intervention also significantly decreased levels of serum triglyceride, total cholesterol and low-density lipoprotein cholesterol. Significant positive effects on work control, interpersonal relationships at work, global job satisfaction and quality of life were also demonstrated. This study showed that a PA program can be helpful in improving physical, physiological and psychological outcomes for overweight and sedentary employees in high-tech industries.
Eclipse SteerTech liquid lenslet beam steering technology

NASA Astrophysics Data System (ADS)

Westfall, Raymond T.; Rogers, Stanley; Shannon, Kenneth C., III

2007-09-01

Eclipse SteerTech TM transmissive fluid state electrowetting technology has successfully demonstrated the ability to control the shape and position of a fluid lenslet. In its final form, the technology will incorporate a dual fluid lenslet approach capable of operating in extremely high acceleration environments. The beam steering system works on the principle of electro-wetting. A substrate is covered with a closely spaced array of, independently addressable, transparent, electrically conductive pixels utilizing Eclipse's proprietary EclipseTEC TM technology. By activating and deactivating selected EclipseTEC TM pixels in the proper sequence, the shape and position of fluid lenslets or arrays of lenslets can be dynamically changed at will. The position and shape of individual fluid lenslets may be accurately controlled on any flat, simply curved, or complex curved, transparent or reflective surface. The smaller the pixels the better control of the position and shape of the fluid lenslets. Information on the successful testing of the Eclipse SteerTech TM lenslet and discussion of its use in a de-centered lenslet array will be presented.
Adapted managerial mathematical model to study the functions and interactions between enterprises in high-tech cluster

NASA Astrophysics Data System (ADS)

Anguelov, Kiril P.; Kaynakchieva, Vesela G.

2017-12-01

The aim of the current study is to research and analyze Adapted managerial mathematical model to study the functions and interactions between enterprises in high-tech cluster, and his approbation in given high-tech cluster; to create high-tech cluster, taking into account the impact of relationships between individual units in the cluster-Leading Enterprises, network of Enterprises subcontractors, economic infrastructure.
Increasing Receipt of High-Tech/High-Cost Imaging and Its Determinants in the Last Month of Taiwanese Patients With Metastatic Cancer, 2001–2010

PubMed Central

Liu, Tsang-Wu; Hung, Yen-Ni; Soong, Thomas C.; Tang, Siew Tzuh

2015-01-01

Abstract One strategy for controlling the skyrocketing costs of cancer care may be to target high-tech/high-cost imaging at the end of life (EOL). This population-based study investigated receipt of high-tech/high-cost imaging and its determinants for Taiwanese patients with metastatic cancer in their last month of life. Individual patient-level data were linked with encrypted identification numbers from computerized administrative data in Taiwan, that is, the National Register of Deaths Database, Cancer Registration System database, and National Health Insurance claims datasets, Database of Medical Care Institutions Status, and national census statistics (population/household income). We identified receipt of computerized tomography (CT), magnetic resonance imaging (MRI), positron emission tomography (PET), and radionuclide bone scans (BSs) for 236,911 Taiwanese cancer decedents with metastatic disease, 2001 to 2010. Associations of patient, physician, hospital, and regional factors with receiving CT, MRI, and bone scan in the last month of life were evaluated by multilevel generalized linear-mixed models. Over one-third (average [range]: 36.11% [33.07%–37.31%]) of patients with metastatic cancer received at least 1 high-tech/high-cost imaging modality in their last month (usage rates for CT, MRI, PET, and BS were 31.05%, 5.81%, 0.25%, and 8.15%, respectively). In 2001 to 2010, trends of receipt increased for CT (27.96–32.22%), MRI (4.34–6.70%), and PET (0.00–0.62%), but decreased for BS (9.47–6.57%). Facilitative determinants with consistent trends for at least 2 high-tech/high-cost imaging modalities were male gender, younger age, married, rural residence, lung cancer diagnosis, dying within 1 to 2 years of diagnosis, not under medical oncology care, and receiving care at a teaching hospital with a larger volume of terminally ill cancer patients and greater EOL care intensity. Undergoing high-tech/high-cost imaging at EOL generally was not associated with regional characteristics, healthcare resources, and EOL care intensity. To more effectively use high-tech/high-cost imaging at EOL, clinical and financial interventions should target nonmedical oncologists/hematologists affiliated with teaching hospitals that tend to aggressively treat high volumes of terminally ill cancer patients, thereby avoiding unnecessary EOL care spending and transforming healthcare systems into affordable high-quality cancer care delivery systems. PMID:26266390
Effects of job-related stress and burnout on asthenopia among high-tech workers.

PubMed

Ostrovsky, Anat; Ribak, Joseph; Pereg, Avihu; Gaton, Dan

2012-01-01

Eye- and vision-related symptoms are the most frequent health problems among computer users. The findings of eye strain, tired eyes, eye irritation, burning sensation, redness, blurred vision and double vision, when appearing together, have recently been termed 'computer vision syndrome', or asthenopia. To examine the frequency and intensity of asthenopia among individuals employed in research and development departments of high-tech firms and the effects of job stress and burnout on ocular complaints, this study included 106 subjects, 42 high-tech workers (study group) and 64 bank employees (control group). All participants completed self-report questionnaires covering demographics, asthenopia, satisfaction with work environmental conditions, job-related stress and burnout. There was a significant between-group difference in the intensity of asthenopia, but not in its frequency. Burnout appeared to be a significant contributing factor to the intensity and frequency of asthenopia. This study shows that burnout is a significant factor in asthenopic complaints in high-tech workers. This manuscript analyses the effects of psychological environmental factors, such as job stress and burnout, on ocular complaints at the workplace of computer users. The findings may have an ergonomic impact on how to improve health, safety and comfort of the working environment among computer users, for better perception of the job environment, efficacy and production.
Increased Risk of Respiratory Mortality Associated with the High-Tech Manufacturing Industry: A 26-Year Study

PubMed Central

Lin, Ro-Ting; Christiani, David C.; Kawachi, Ichiro; Chan, Ta-Chien; Chiang, Po-Huang; Chan, Chang-Chuan

2016-01-01

Global high-tech manufacturers are mainly located in newly industrialized countries, raising concerns about adverse health consequences from industrial pollution for people living nearby. We investigated the ecological association between respiratory mortality and the development of Taiwan’s high-tech manufacturing, taking into account industrialization and socioeconomic development, for 19 cities and counties—6 in the science park group and 13 in the control group—from 1982 to 2007. We applied a linear mixed-effects model to analyze how science park development over time is associated with age-adjusted and sex-specific mortality rates for asthma and chronic obstructive pulmonary disease (COPD). Asthma and female COPD mortality rates decreased in both groups, but they decreased 9%–16% slower in the science park group. Male COPD mortality rates increased in both groups, but the rate increased 10% faster in the science park group. Science park development over time was a significant predictor of death from asthma (p ≤ 0.0001) and COPD (p = 0.0212). The long-term development of clustered high-tech manufacturing may negatively affect nearby populations, constraining health advantages that were anticipated, given overall progress in living standards, knowledge, and health services. National governments should incorporate the long-term health effects on local populations into environmental impact assessments. PMID:27271647
Increased Risk of Respiratory Mortality Associated with the High-Tech Manufacturing Industry: A 26-Year Study.

PubMed

Lin, Ro-Ting; Christiani, David C; Kawachi, Ichiro; Chan, Ta-Chien; Chiang, Po-Huang; Chan, Chang-Chuan

2016-06-03

Global high-tech manufacturers are mainly located in newly industrialized countries, raising concerns about adverse health consequences from industrial pollution for people living nearby. We investigated the ecological association between respiratory mortality and the development of Taiwan's high-tech manufacturing, taking into account industrialization and socioeconomic development, for 19 cities and counties-6 in the science park group and 13 in the control group-from 1982 to 2007. We applied a linear mixed-effects model to analyze how science park development over time is associated with age-adjusted and sex-specific mortality rates for asthma and chronic obstructive pulmonary disease (COPD). Asthma and female COPD mortality rates decreased in both groups, but they decreased 9%-16% slower in the science park group. Male COPD mortality rates increased in both groups, but the rate increased 10% faster in the science park group. Science park development over time was a significant predictor of death from asthma (p ≤ 0.0001) and COPD (p = 0.0212). The long-term development of clustered high-tech manufacturing may negatively affect nearby populations, constraining health advantages that were anticipated, given overall progress in living standards, knowledge, and health services. National governments should incorporate the long-term health effects on local populations into environmental impact assessments.
Longitudinal analysis of high-technology medical services and hospital financial performance.

PubMed

Zengul, Ferhat D; Weech-Maldonado, Robert; Ozaydin, Bunyamin; Patrician, Patricia A; OʼConnor, Stephen J

U.S. hospitals have been investing in high-technology medical services as a strategy to improve financial performance. Despite the interest in high-tech medical services, there is not much information available about the impact of high-tech services on financial performance. The aim of this study was to examine the impact of high-tech medical services on financial performance of U.S. hospitals by using the resource-based view of the firm as a conceptual framework. Fixed-effects regressions with 2 years lagged independent variables using a longitudinal panel sample of 3,268 hospitals (2005-2010). It was hypothesized that hospitals with rare or large numbers (breadth) of high-tech medical services will experience better financial performance. Fixed effects regression results supported the link between a larger breadth of high-tech services and total margin, but only among not-for-profit hospitals. Both breadth and rareness of high-tech services were associated with high total margin among not-for-profit hospitals. Neither breadth nor rareness of high-tech services was associated with operating margin. Although breadth and rareness of high-tech services resulted in lower expenses per inpatient day among not-for-profit hospitals, these lower costs were offset by lower revenues per inpatient day. Enhancing the breadth of high-tech services may be a legitimate organizational strategy to improve financial performance, especially among not-for-profit hospitals. Hospitals may experience increased productivity and efficiency, and therefore lower inpatient operating costs, as a result of newer technologies. However, the negative impact on operating revenue should caution hospital administrators about revenue reducing features of these technologies, which may be related to the payer mix that these technologies may attract. Therefore, managers should consider both the cost and revenue implications of these technologies.
Project Georgia High School/High Tech

NASA Technical Reports Server (NTRS)

2000-01-01

The High School/High Tech initiative of the President's Committee on Employment of Disabilities, Georgia's application of the collaborative "Georgia Model" and NASA's commitment of funding have shown that opportunities for High School/High Tech students are unlimited. In Georgia, the partnership approach to meeting the needs of this program has opened doors previously closed. As the program grows and develops, reflecting the needs of our students and the marketplace, more opportunities will be available. Our collaboratives are there to provide these opportunities and meet the challenge of matching our students with appropriate education and career goals. Summing up the activities and outcomes of Project Georgia High School/High Tech is not difficult. Significant outcomes have already occurred in the Savannah area as a result of NASA's grant. The support of NASA has enabled Georgia Committee to "grow" High School/High Tech throughout the region-and, by example, the state. The success of the Columbus pilot project has fostered the proliferation of projects, resulting in more than 30 Georgia High School High Tech programs-with eight in the Savannah area.
NASA Tech Briefs, April 1999. Volume 23, No. 4

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage sections on automotive technology, and CAM and sections on electronic components and systems, software, materials, machinery/automation, physical sciences, and a special section of Electronic Tech Briefs and Motion Control Tech Briefs.
NASA Tech Briefs, December 2000. Volume 24, No. 12

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: special coverage sections on Imaging/Video/Display Technology, and sections on electronic components and systems, test and measurement, software, information sciences, and special sections of Electronics Tech Briefs and Motion Control Tech Briefs.
NASA Tech Briefs, October 2001. Volume 25, No. 10

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on composites and plastics, electronic components and systems, software, mechanics, physical sciences, information sciences, book and reports, and a special sections of Photonics Tech Briefs and Motion Control Tech Briefs.

NASA Tech Briefs, February 2002. Volume 26, No. 2

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include:a technology focus on computers, electronic components and systems, software, materials, mechanics,physical sciences machinery, manufacturing/fabrication, mathematics, book and reports, motion control tech briefs and a special section on Photonics Tech Briefs.
Digital Logistics

DTIC Science & Technology

2000-03-17

There will also be instances when we will need to take advantage of technological leaps made by our allies. The ’clash’ of high tech with low tech ...must be considered, especially as we move toward very high tech solutions to our military needs. The end goal is to create Army Forces that are...effect that science and technology today distort the military by substituting high - tech weapons that do not always work for more basic military
NASA Tech Briefs, September 1998. Volume 22, No. 9

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on data acquisition, also, electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, physical sciences, information sciences, This issue contains a special sections of Electronics Tech Briefs and Motion Control Tech Briefs.
Project Georgia High School/High Tech

NASA Technical Reports Server (NTRS)

2000-01-01

Georgia High School/High Tech has been developing a suggested curriculum for use in its programs. The purpose of this instructional material is to provide a basic curriculum format for teachers of High School/High Tech students. The curriculum is designed to implement QCC classroom instruction that encourages career development in technological fields through post-secondary education, paid summer internships, and exposure to experiences in high technology.
High School/High Tech Program Guide: An Implementation Guide for High School/High Tech Program Coordinators. Promoting Careers in Science and Technology for High School Students with Disabilities.

ERIC Educational Resources Information Center

Office of Disability Employment Policy (DOL), Washington, DC.

This implementation guide is intended to assist educators in planning, establishing, building, and managing a High School/High Tech project for high school students with disabilities. The program is designed to develop career opportunities, provide activities that will spark an interest in high technology fields, and encourage students to pursue…
Minimizing Security Vulnerabilities in High-Tech Classrooms

ERIC Educational Resources Information Center

Ozkan, Betul C.; Gunay, Vedat

2004-01-01

Emerging technologies are quickly becoming part of daily learning and teaching endeavors in academia. Due to the access to certain high-tech tools educators must learn how to integrate these tools in educational settings. However, many also encounter problems and weaknesses in the same high-tech environment that uses and delivers information…
Design Tech High School: d.tech

ERIC Educational Resources Information Center

EDUCAUSE, 2015

2015-01-01

A Bay Area charter high school, d.tech develops "innovation-ready" students by combining content knowledge with the design thinking process while fostering a sense of autonomy and purpose. The academic model is grounded in self-paced learning through a flex schedule, high standards, and design thinking through a four-year design…
Iowa High School High Tech: Promoting Careers in Technology for Students with Disabilities. Final Report and Implementation Manual.

ERIC Educational Resources Information Center

McQuillen, Terry; Nietupski, John; Berg, Deana Duncan; Daugherty, Vicki; Bildstein, Stephanie

This final report and implementation manual describes the activities and outcomes of Iowa's High School High Tech (HSHT) program, a joint effort of Grant Wood Area Education Agency and Goodwill Industries of Southeast Iowa to inspire students with disabilities to pursue high tech careers. The program provides opportunities for students to learn…
Building 21st Century Schools: Designing Smarter, Sleeker High-Tech Facilities.

ERIC Educational Resources Information Center

Cutshall, Sandy

2003-01-01

The demand for high-tech programs in tandem with traditional classes challenges school districts to provide flexible facilities for career and technical education. Some districts partner with local businesses to develop state-of-the art facilities and deal with costs, upkeep, and upgrading. Some high-tech educational facilities are themselves…
Introduction to Vocations. High Tech Focus. Final Report 1984-85.

ERIC Educational Resources Information Center

Wayne Township Schools, NJ.

This report contains the materials that were developed during a project to make middle-grade students more aware of high tech careers through the following activities: (1) teacher and student visitations of community sites to explore high tech careers in 15 occupational clusters; (2) exploratory activities to facilitate linkages and articulation…
NASA Tech Briefs, June 1998. Volume 22, No. 6

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage on computer hardware and peripherals, electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, manufacturing, physical sciences, information sciences, book and reports, and a special section of Photonics Tech Briefs. and a second special section of Motion Control Tech Briefs
NASA Tech Briefs, October 1999. Volume 23, No. 10

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage section on data acquisition and sensors and sections on electronic components and systems, software, materials, mechanics, machinery/automation, manufacturing/fabrication, bio-medical, physical sciences, information sciences, book and reports, and special section of Electronics Tech Briefs and Motion Control Tech briefs
NASA Tech Briefs, December 1998. Volume 22, No. 12

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage section on design and analysis software, and sections on electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, manufacturing/fabrication, physical sciences, and special sections of Photonics Tech Briefs, Motion Control Tech briefs and a Hot Technology File 1999 Resource Guide.
NASA Tech Briefs, October 2000. Volume 24, No. 10

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: special coverage sections on CAD, CAE, and PDM, and, Composites and Plastics, and sections on electronic components and systems, software, test and measurement, mechanics, manufacturing/fabrication, physical sciences, information sciences, book and reports, and special sections of Electronics Tech Briefs and Motion Control Tech Briefs
Report from the BIT's 4th Annual World Congress of High-Tech Acupuncture and Integrative Medicine Held in Xi'an, China, 25-27 September 2017.

PubMed

Litscher, Gerhard; Mei, Xiaodan

2017-10-19

High-tech acupuncture is an example of a very successful cross-over between tradition and innovation. "The Annual World Congress of High-Tech Acupuncture and Integrative Medicine" was successfully organized on four occasions, and attracted more than 800 participants from 55 countries [...].
Adult Tech Prep.

ERIC Educational Resources Information Center

Schaad, Donna

For over 2 years, Blak Hawk College (Illinois) has provided high school equivalency (GED) candidates and recipients, older returning students, and underprepared high school graduates with a Tech Prep curriculum to give them the skills to make the transition from adult basic education to college or work. The Adult Tech Prep (ATP) core curriculum…
The Virginia Tech Library System (VTLS).

ERIC Educational Resources Information Center

McGrath, Deborah Hall; Lee, Carl R.

1989-01-01

Discusses topics relating to the Virginia Tech Library System: the company (VTLS, Inc.); the software; data structure; cataloging, status, and authority control; circulation; serials control and acquisitions; the online catalog; management reporting; networking; and the operating environment. Sidebars discuss the Vanilla Network; LINNEA--a network…
Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

PubMed

Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.
Space Telemetry for the Energy Industry

NASA Technical Reports Server (NTRS)

1983-01-01

Space telemetry is the process whereby information acquired in orbit is relayed to Earth. In 1981, Bill Sheen, President of Nu-Tech Industries, Inc., saw a need for a better way of monitoring flow, due to high costs of oil and gas, increasing oil field theft and a mounting requirement for more timely information to speed up accounting procedures. Sheen turned to NASA for assistance which was provided by Kerr Industrial Applications Center (KIAC). The system that emerged from two years of research, now in production at Nu-Tech's Fort Worth Texas facility, is known as the Remote Measurement and Control Network.
Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

PubMed

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

PubMed Central

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices. PMID:27195666
The Effect of Studying Tech Prep in High School and College Academic Performance

ERIC Educational Resources Information Center

Ray, Larry A.

2011-01-01

This study examined the academic performance of Tech Prep students (referred to as participants) in comparison to non-Tech Prep students (referred to as non-participants) entering a two-year community college from sixteen different high schools in Stark County, Ohio. This study provided a quantitative analysis of students' academic experiences to…
Engineering English and the High-Tech Industry: A Case Study of an English Needs Analysis of Process Integration Engineers at a Semiconductor Manufacturing Company in Taiwan

ERIC Educational Resources Information Center

Spence, Paul; Liu, Gi-Zen

2013-01-01

The global high-tech industry is characterized by extreme competitiveness, innovation, and widespread use of English. Consequently, Taiwanese high-tech companies require engineers that are talented in both their engineering and English abilities. In response to the lack of knowledge regarding the English skills needed by engineers in Taiwan's…
Quality Control Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 18 units to consider for use in a tech prep competency profile for the occupation of quality control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific occupation and…
Instrumentation Control Technician.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 22 units to consider for use in a tech prep competency profile for the occupation of instrumentation control technician. All the units listed will not necessarily apply to every situation or tech prep consortium, nor will all the competencies within each unit be appropriate. Several units appear within each specific…
Develop applications based on android: Teacher Engagement Control of Health (TECH)

NASA Astrophysics Data System (ADS)

Sasmoko; Manalu, S. R.; Widhoyoko, S. A.; Indrianti, Y.; Suparto

2018-03-01

Physical and psychological condition of teachers is very important because it helped determine the realization of a positive school climate and productive so that they can run their profession optimally. This research is an advanced research on the design of ITEI application that able to see the profile of teacher’s engagement in Indonesia and to optimize the condition is needed an application that can detect the health of teachers both physically and psychologically. The research method used is the neuroresearch method combined with the development of IT system design for TECH which includes server design, database and android TECH application display. The study yielded 1) mental health benchmarks, 2) physical health benchmarks, and 3) the design of Android Application for Teacher Engagement Control of Health (TECH).
Development of a Career Student Guide for the Tech Prep Program for Henry County High School.

ERIC Educational Resources Information Center

Winchester, Ruth Ann

This practicum report describes the research conducted in preparation for developing a career student guide to acquaint students attending Henry County High School (HCHS) in McDonough, Georgia, with the school's new tech prep program. Chapters 1 and 2 contain background information about HCHS' tech prep program and a review of literature regarding…
Economic Migrants in a Global Labour Market: A Report on the Recruitment and Retention of Asian Computer Professionals by Canadian High Tech Firms. CPRN Discussion Paper.

ERIC Educational Resources Information Center

Rao, Badrinath

The recruitment and retention of Asian computer professionals by Canadian high-tech companies was examined by interviewing 8 Canadian-born information technology (IT) workers, 47 Asian-born IT workers, and 8 human resource (HR) professionals employed by high-tech companies in Ottawa. Of the 47 Asians, 33 stated that they did not know much about…
The Effects of Partnership Management on Supply Chain Cooperative Performance: A Case Study of High-Tech Industry

NASA Astrophysics Data System (ADS)

Wu, Mei-Ying; Chang, Yun-Ju; Weng, Yung-Chien

2009-08-01

With the structural change of global supply chains, the relationship between manufacturers and suppliers has transformed into a long-term partnership. Thus, this study aims to explore the partnership between manufacturers and suppliers in Taiwan's high-tech industry. Four constructs, including partner characteristic, partnership quality, partnership closeness, and cooperative performance, induced from previous literatures are used to construct the research framework and hypotheses. A questionnaire survey is then performed on executives and staffs involved in the high-tech industry. The proposed framework and hypotheses are empirically validated through confirmatory factory analysis and structural equation modeling. It is expected that the research findings can serve as a reference for Taiwan's high-tech industry on building partnerships.
A controlled study on batted ball speed and available pitcher reaction time in slowpitch softball

PubMed Central

McDowell, M; Ciocco, M

2005-01-01

Objectives: To investigate safety risks in slowpitch softball by conducting laboratory and experimental studies on the performance of high tech softball bats with polyurethane softballs. To compare the results with the recommended safety standards. Methods: ASTM standard compression testing of seven softball models was conducted. Using these seven softball models, bat/ball impact testing was performed using seven adult male softball players and six high tech softball bat models to determine mean batted ball speeds. Over 500 bat/ball impact measurements were recorded and analysed. Available pitcher reaction time was calculated from the mean batted ball speed measurements. Results: According to the United States Specialty Sports Association and the Amateur Softball Association, the maximum initial batted ball speed should be 137.2 km/h, which corresponds to a minimum pitcher reaction time of 0.420 second. These experiments produced mean batted ball speeds of 134.0–159.7 km/h, which correspond to available pitcher reaction times of 0.409–0.361 second. Conclusion: The use of high tech softball bats with polyurethane softballs can result in batted ball speeds that exceed the recommended safety limits, which correspond to decreased available pitcher reaction times. PMID:15793092
A systematic quality review of high-tech AAC interventions as an evidence-based practice.

PubMed

Morin, Kristi L; Ganz, Jennifer B; Gregori, Emily V; Foster, Margaret J; Gerow, Stephanie L; Genç-Tosun, Derya; Hong, Ee Rea

2018-06-01

Although high-tech augmentative and alternative communication (AAC) is commonly used to teach social-communication skills to people with autism spectrum disorder or intellectual disabilities who have complex communication needs, there is a critical need to evaluate the efficacy of this approach. The aim of this systematic review was to evaluate the quality of single-case experimental design research on the use of high-tech AAC to teach social-communication skills to individuals with autism spectrum disorder or intellectual disabilities who have complex communication needs, to determine if this intervention approach meets the criteria for evidence-based practices as outlined by the What Works Clearinghouse. Additionally, information on the following extended methodological standards is reported on all included studies: participant description, description of setting and materials, interventionist description, baseline and intervention description, maintenance, generalization, procedural integrity, and social validity. The results from 18 multiple-baseline or multiple-probe experiments across 17 studies indicate that using high-tech AAC to teach social-communication skills to individuals with autism spectrum disorder or intellectual disabilities and complex communication needs can be considered an evidence-based practice, although the review of comparison (i.e., alternating treatment) design studies did not indicate that high-tech AAC is significantly better than low-tech AAC.
NASA Tech Briefs, August 2002. Volume 26, No. 8

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on computers, electronic components and systems, software, materials, mechanics, machinery/automation, manufacturing, physical sciences, information sciences, book and reports, and Motion control Tech Briefs.
Evidence-Based Design for Project-Based Learning: A Case Study for a 50,000 SF Addition Dedicated to the New Tech Curriculum

ERIC Educational Resources Information Center

Moretti, Richard D.; Conte, Philip R.

2012-01-01

The Seaford School District, Seaford, Delaware, determined that a component of their "reinvention" of Seaford High School would be the creation of a New Tech Academy, affiliated with the New Tech Network and housed in an addition to that building. The New Tech Network, headquartered in Napa, California, is a rapidly growing association…
Complementary health care: a welcome addition to an employee benefits program.

PubMed

DeVries, George

2003-09-01

One up-and-coming approach to controlling health care costs is complementary health care, which does not rely on advances in high-tech, invasive technology or expensive new pharmaceuticals, but rather focuses much more on the high-touch, direct practitioner care. It often offers lower cost alternatives to traditional medicine.
ISO 9002 as Literacy Practice: Coping with Quality-Control Documents in a High-Tech Company

ERIC Educational Resources Information Center

Kleifgen, Jo Anne

2005-01-01

This study describes the process by which a circuit board manufacturing company became certified in an international quality control program known as ISO 9002. Particular attention is paid to how quality documents were made and used in actual practice and to the relationship between these standardized procedures (official literacies) and…
NASA Tech Briefs, June 2002. Volume 26, No. 6

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on data acquisition, electronic components and systems, software, materials, mechanics, machinery/automation, physical sciences, book and reports, motion control, and a special section of Photonics Tech Briefs.
"What I Did over My Summer Vacation..."

ERIC Educational Resources Information Center

Techniques: Making Education and Career Connections, 1997

1997-01-01

A tech prep summer camp was designed to give ninth graders a taste of tech prep before they were asked to choose a high school path. Parents were invited to dinner to learn about tech prep programs and their potential for successful careers. (JOW)
Communications for Lifelong Success I and II (Tech Prep English I and II). Pilot Test Materials for Pendleton High School, Pendleton, South Carolina. Draft.

ERIC Educational Resources Information Center

Turlington, Anita; And Others

These instructional materials include six supplementary units for Tech Prep English I (grade 9) and six assignments for Tech Prep English II (grade 10). The Tech Prep English I units have these components: unit objectives, introduction, and follow-up exercises. Topics include goal setting, problem solving and decision making, listening and reading…
Problems and Countermeasures of Zhejiang High-Tech Enterprises Industry-University-Institute Cooperation in China

NASA Astrophysics Data System (ADS)

Zhou, Qing; Mao, Chong-Feng; Hou, Lin

Industry-university-institute cooperation is an important means to accelerate technical development and achievements for high-tech enterprises. Considering that Zhejiang high-tech enterprises existed some problems which included low cooperative level, single distribution, weak secondary R&D ability, obvious risk and so on, government should play an guiding role on improving information service system, enhancing cooperative level, promoting scientific intermediary service organization system construction, and building better environment for Industry-university-institute cooperation.
Project Synopsis for High School/High Tech

NASA Technical Reports Server (NTRS)

1997-01-01

To help increase the diversity of workers at NASA centers it is necessary to provide students with disabilities the opportunities to explore careers in high technology. HIGH SCHOOL/HIGH TECH, an enrichment program, pioneered at Goddard Space Flight Center, successfully introduces students with disabilities to high tech careers. This community-based partnership serves as a model for three additional NASA sites-Ames Research Center, Johnson Space Flight Center, and Lewis Research Center. For a three year period beginning August 15, 1995, provide financial and technical support to a local agency in each NASA center area which serves persons with disabilities to enable a High School/High Tech program to develop and stand alone. Each project will develop a basis of cooperation with Ames, Johnson, and Lewis as well as a variety of community groups including the public schools, high tech employers, post-secondary education and training programs, rehabilitation agencies, and community economic development organizations. Throughout the startup period and thereafter, local youths with disabilities will have early exposure to professions in mathematics, science, and technology-related fields. This exposure will be multifaceted to insure adequate opportunity for realistic career exploration so these youths have an opportunity to test their interests and abilities. The exposure will be presented in the most supportive environment that is feasible.

Does the Number of College Credits Earned in a Tech Prep and Postsecondary Enrollment Options Program Predict College Success?

ERIC Educational Resources Information Center

Meyer, Bruce A.

2011-01-01

The purpose of this study was to examine a Tech Prep Program located in Northwest Ohio and determine the degree to which college credits earned in high school through the Tech Prep and PSEO Programs predict college success and if there were any significant gender/race differences in credits earned and college success as well as high school…
NASA Tech Briefs, August 2001. Volume 25, No. 8

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on computers and peripherals, and sections on electronic components systems, software, materials, mechanics, manufacturing/fabrication, physical sciences, book and reports, and a special section of Motion Control Tech Briefs.
NASA Tech Briefs, October 2002. Volume 26, No. 10

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on sensors, electronic components and systems, software, materials, materials, mechanics, manufacturing, physical sciences, information sciences, book and reports, motion control and a special section of Photonics Tech Briefs.
Manipulating presence influences the magnitude of virtual reality analgesia.

PubMed

Hoffman, Hunter G; Sharar, Sam R; Coda, Barbara; Everett, John J; Ciol, Marcia; Richards, Todd; Patterson, David R

2004-09-01

Excessive pain during medical procedures performed in unanesthetized patients is frequently reported, but can be reduced with virtual reality (VR) distraction. Increasing the person's illusion of going into the virtual world may increase how effectively VR distracts pain. Healthy volunteers aged 18-20 years participated in a double-blind between-groups design. Each subject received a brief baseline thermal pain stimulus, and the same stimulus again minutes later with either a Low Tech or a High Tech VR distraction. Each subject provided subjective 0-10 ratings of cognitive, sensory and affective components of pain, and rated their illusion of going inside the virtual world. Subjects in the High Tech VR group reported a stronger illusion of going into the virtual world (VR presence) than subjects in the Low Tech VR group, (4.2 vs. 2.5, respectively, P = 0.009) and more pain reduction (reduction of worst pain is 3.1 for High Tech VR vs. 0.7 for Low Tech VR, P < 0.001). Across groups, the amount of pain reduction was positively and significantly correlated with VR presence levels reported by subjects ( r = 0.48 for 'worst pain', P < 0.005).
The Computer in Education--Are We over Our Heads?

ERIC Educational Resources Information Center

Schrader, Vincent E.

1984-01-01

Cautions school systems considering buying microcomputers that staying current with technology is difficult and that much existing software and hardware is inferior; identifies critical concerns involved in integrating computers into education; and stresses the importance of educators' role in controlling high tech. (MJL)
Texture, ride quality, and the uniformity of hot-mix asphalt pavements.

DOT National Transportation Integrated Search

2005-01-01

Two years ago, the author completed a study with researchers at Virginia Tech that was designed to develop a tool to measure and control segregation of hot-mix asphalt pavements. This earlier work focused on the application of high-speed texture meas...
Tobacco control and direct democracy in Dade County, Florida: future implications for health advocates.

PubMed

Givel, M S; Glantz, S A

2000-01-01

In 1979 and 1980 in Dade County, Florida, a small grassroots advocacy group, Group Against Smoking Pollution (GASP), attempted to enact a clean indoor air ordinance through the initiative process. The tobacco industry's successful efforts to defeat the initiatives were expensive high-tech media-centered campaigns. Even though GASP's electoral resources were extremely limited for both initiatives, GASP utilized similar media-centered tactics. This approach attempted to defeat the tobacco industry in its own venue, in spite of the tobacco industry's vastly greater resources. Nevertheless, the industry defeated these ordinances by narrow margins because of broad voter support for the initiatives before the industry started its campaigns. Health advocates will never have the resources to match the tobacco industry in expensive high-tech media-centered initiative campaigns. Rather, their power lies in the general popularity of tobacco control legislation and their ability to mobilize broad grassroots efforts combined with an adequately funded media campaign.
Displacement in new economy labor markets: Post-displacement wage loss in high tech versus low tech cities.

PubMed

Davis, Daniel J; Rubin, Beth A

2016-11-01

While scholars and politicians tout education as the salve to employment disruptions, we argue that the geography of the new economy, and the social closure mechanisms that geography creates, may be just as important as individuals' characteristics for predicting post-displacement wage loss (or gain). We use data from the 2012 Displaced Workers ement of the Current Population Survey and from the 2010 United States Census to test hypotheses linking local labor markets in different industrial contexts to post-displacement wage loss. Our results point to age as a closure mechanism, and to the partially protective effect of education in high-tech versus low-tech economic sectors. This study is the first to use national level data to examine how employment in high-tech cities influences post-displacement wages. These findings are relevant both for theorizing about the new economy and for public policy. Copyright © 2016 Elsevier Inc. All rights reserved.
Laying the Groundwork.

ERIC Educational Resources Information Center

Kretchmer, Mark R.

2000-01-01

Discusses how to avoid costly errors in high-tech retrofits through proper planning and coordination. Guidelines are offered for selecting cable installers, using multi-disciplinary consulting engineering firm, and space planning when making high-tech retrofits. (GR)
Effect of Nanotechnology Instructions on Senior High School Students

ERIC Educational Resources Information Center

Lu, Chow-Chin; Sung, Chia-Chi

2011-01-01

In this research, we cooperate with senior high school teachers to understand current nanotechnology model of senior high school nanotechnology curriculum in Taiwan. Then design senior high school nanotechnology (nano-tech) curriculum to teach 503 senior high school students. After teaching the nano-tech curriculum we use the "Nanotechnology…
Tech-Prep/Associate Degree Program Guide: Tech Prep Associate Degree Program, Business Administration Associate Degree Program, Office Administration Associate Degree Program, Allied Health Associate Degree Program.

ERIC Educational Resources Information Center

Marmaras, Judy; Neri, Pat

The Tech-Prep Associate Degree Program (TPAD) at the Community College of Rhode Island (CCRI) in Warwick, is a high school/community college partnership providing high school students with an alternative program of study focused on goal setting, basic academic skills development, and the skills needed to pursue a career in a technical, business or…
The ORNL Chemical Technology Division, 1950-1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jolley, R.L.; Genung, R.K.; McNeese, L.E.

1994-10-01

This document attempts to reconstruct the role played by the Chemical Technology Division (Chem Tech) of the Oak Ridge National Laboratory (ORNL) in the atomic era since the 1940`s related to the development and production of nuclear weapons and power reactors. Chem Tech`s early contributions were landmark pioneering studies. Unknown and dimly perceived problems like chemical hazards, radioactivity, and criticality had to be dealt with. New chemical concepts and processes had to be developed to test the new theories being developed by physicists. New engineering concepts had to be developed and demonstrated in order to build facilities and equipment thatmore » had never before been attempted. Chem Tech`s role was chemical separations, especially uranium and plutonium, and nuclear fuel reprocessing. With diversification of national and ORNL missions, Chem Tech undertook R&D studies in many areas including biotechnology; clinical and environmental chemistry; nuclear reactors; safety regulations; effective and safe waste management and disposal; computer modeling and informational databases; isotope production; and environmental control. The changing mission of Chem Tech are encapsulated in the evolving activities.« less
Contextual Learning and Tech Prep Curriculum Integration.

ERIC Educational Resources Information Center

Edling, Walter

Because tech prep has the twin goals of preparing students for entry into postsecondary/continuing education or the work force after high school, tech prep programs require significant modification of conventional curricula and teaching methodologies. Both research and experience have demonstrated that the ability to transfer learning from one…
High Tech, Low Tech and Education. Sociology of the School.

ERIC Educational Resources Information Center

Watkins, Peter

Designed to provide a link between academic thought and research and the practice of teaching, this monograph explores the appropriate educational response to technological change. The central argument of this study is that future job opportunities will lie essentially with low tech jobs, i.e., traditional, basic, industrial jobs, rather than the…
School-to-Work Apprenticeship. Project Manual 1993-1995.

ERIC Educational Resources Information Center

Lee Coll., Baytown, TX.

With 1993-94 and 1994-95 Perkins tech prep funds, Lee College, in cooperation with a consortium and local schools, planned, developed, and validated a school-to-work apprenticeship model for tech prep programs. The other educational partners were the Gulf Coast Tech Prep Consortium and nine high schools in eight area school districts. The…
LUVOIR Tech Notes

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

2016-01-01

We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.
Special Report: Vocational Training in the High-Tech Age.

ERIC Educational Resources Information Center

Mansnerus, Laura; And Others

1994-01-01

"New Pressures on Vocational Education" (Mansnerus) describes new forms (tech prep, career academies, apprenticeship, school enterprises); "Biotechnology Goes to High School" (Quinn) describes Berkeley High's Biotech Academy created by industry; and "Votech That Works" (Holusha) stresses the importance of specialized training for non-college-bound…
ADOPT: Automotive Deployment Options Projection Tool | Transportation

Science.gov Websites

new model options by combining high-selling powertrains and high-selling vehicle platforms. NREL has . Screenshot of the ADOPT user interface, with two simulation scenario options (low tech and high tech emissions. Biomass Market Dynamics Supporting the Large-Scale Deployment of High-Octane Fuel Production in
From High School to College to Work: Students with Disabilities in High Tech Fields.

ERIC Educational Resources Information Center

Burgstahler, Sheryl; Wild, Nellie; Smallman, Julie

This paper describes DO-IT (Disabilities, Opportunities, Internetworking and Technology), a cooperative program of the University of Washington and the High School/High Tech program to increase the career success of individuals with disabilities by providing access to technology, career preparation activities, and work experiences. DO-IT works…
Learning Where They Teach

ERIC Educational Resources Information Center

Robelen, Erik W.

2007-01-01

In 2004, High Tech High, a charter school chain based in San Diego, California, became the state's first charter-management organization (CMO) to gain state approval to operate its own teacher-credentialing program. It is not stopping there. In August, it will cut the ribbon on the High Tech High graduate school of education, which appears to be…

Employment and Earnings in High-Tech Ethnic Niches

ERIC Educational Resources Information Center

Lee, Jennifer C.

2013-01-01

The increase in high-skilled immigrants to the United States coincided with the expansion of the high-technology sector, and now a large share of Asian immigrants concentrate in high-tech industries. Despite much research on the relationship between ethnic concentration and labor market outcomes, the association between ethnic niche employment and…
High Technology in the High School and Its Effect on Curriculum.

ERIC Educational Resources Information Center

Rizzolo, Ralph M.

The development and implementation of a high-tech laboratory in a small suburban high school in Pequannock Township, New Jersey, demonstrates that the high-tech future is both possible and valuable as it permeates the entire curriculum. In 1984, the vocational studies department shifted its emphasis to prepare students for college as well as for…
Med-Tech Program. Tech Prep Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

Staff from DuSable High School in Chicago, Illinois, collaborated with Malcolm X College and three area hospitals to develop a medical technician training program focusing on career awareness and development of the basic reading and math skills needed for any career. A 3-year Med Tech curriculum for grades 9, 10, and 11 and a career awareness…
High Touch in a High-Tech World

ERIC Educational Resources Information Center

Gibson, Cindy L.

2009-01-01

In a world of high tech and low touch, it is easy for public relations programs to stray from tried-and-true interpersonal strategies long associated with solid communication planning. New technologies allow communications professionals to quickly send e-mails and telephone calls to selected groups. Social media sites provide users immediate…
Sino-Austrian High-Tech Acupuncture Network—Annual Report 2016

PubMed Central

Litscher, Gerhard

2017-01-01

The Sino-Austrian High-Tech Acupuncture Research Network was founded in 2005 and has been growing ever since. The network comprises many partners from China and is highly involved in research and education activities. This report introduces the network’s activities in the year 2016. PMID:28930227
Sino-Austrian High-Tech Acupuncture Network: Annual Report 2017

PubMed Central

2018-01-01

The Sino-Austrian High-Tech Acupuncture Research Network was founded in 2005 and has been growing ever since. The network comprises many partners from China and is highly involved in research and education activities. This report introduces the network’s activities in the year 2017. PMID:29329241
Considering High-Tech Exhibits?

ERIC Educational Resources Information Center

Routman, Emily

1994-01-01

Discusses a variety of high-tech exhibit media used in The Living World, an educational facility operated by The Saint Louis Zoo. Considers the strengths and weaknesses of holograms, video, animatronics, video-equipped microscopes, and computer interactives. Computer interactives are treated with special attention. (LZ)
Future Assets, Student Talent (FAST)

NASA Technical Reports Server (NTRS)

1992-01-01

Future Assets, Student Talent (FAST) motivates and prepares talented students with disabilities to further their education and achieve High Tech and professional employment. The FAST program is managed by local professionals, business, and industry leaders; it is modeled after High School High Tech project TAKE CHARGE started in Los Angeles in 1983. Through cooperative efforts of Alabama Department of Education, Vocational Rehabilitation, Adult and Children Services, and the President's Committee on Employment of People with Disabilities, north central Alabama was chosen as the second site for a High School High Tech project. In 1986 local business, industry, education, government agencies, and rehabilitation representatives started FAST. The program objectives and goals, results and accomplishments, and survey results are included.
NASA Tech Briefs, December 2001. Volume 25, No. 12

NASA Technical Reports Server (NTRS)

2001-01-01

Topics include: special coverage section on sensors, and sections on electronic components and systems, software, materials, mechanics, information sciences, book and reports, and a special section of Motion Control Tech Briefs. It also contains a section celebrating the 25th anniversary of the publication.
High Tech Educators Network Evaluation.

ERIC Educational Resources Information Center

O'Shea, Dan

A process evaluation was conducted to assess the High Tech Educators Network's (HTEN's) activities. Four basic components to the evaluation approach were documentation review, program logic model, written survey, and participant interviews. The model mapped the basic goals and objectives, assumptions, activities, outcome expectations, and…
High-Tech Security Help.

ERIC Educational Resources Information Center

Flanigan, Robin L.

2000-01-01

Advocates embrace high-tech security measures as necessary to avoid Columbine-style massacres. Critics contend that school systems can go overboard, making students feel less safe and too closely scrutinized. Current electronic, biometric, and computer-mapping devices and school applications are discussed. Vendors are listed. (MLH)
Another Innovation from High Tech High--Embedded Teacher Training

ERIC Educational Resources Information Center

Griswold, Janie; Riordan, Rob

2016-01-01

High Tech High School's teaching internship program blends on-the-job work with classroom theory. Interns spend two years working as full teachers as they take courses. The program serves three large purposes: Train new teachers and build capacity in the HTH organization; train teachers in and beyond HTH for success in a wide range of contexts;…
Integrated Technical Curriculum. Curriculum Developed for Project Second Chance II: Tech Reading, Tech Science, Tech Math, Automotive.

ERIC Educational Resources Information Center

Sorensen, Mary K.; And Others

This integrated technical curriculum is designed to enroll and retain adult high school noncompleters in occupational programs by providing them with the remedial and content-area reading instruction needed for success in an automotive program. The following topics are covered in the four units: (1) skills for reading technical materials (basics…
Soft Toys as Instructional Technology in Higher Education: The Case of Llewelyn the Lynx

ERIC Educational Resources Information Center

Raye, Lee

2017-01-01

Scholarship on instructive technologies in higher education has emphasized the use of high-tech facilitative technologies for long-term use, and low-tech props to illustrate single topics. This paper, on the contrary, discusses the use of a long-term, low-tech instructional technology: Llewelyn the Lynx was a soft animal used to assist with…
NASA Tech Briefs, March 1999. Volume 23, No. 3

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage sections on CAD/CAE/PDM, industrial controls and sections on electronic components systems, materials, software, mechanics, machinery/automation, manufacturing/fabrication, physical sciences, book and reports, and a special section of Photonics Tech Briefs and a seconds special section of Rapid Product Development.
Near Field Imaging for the Characterization of Diffusion Length and Waveguiding in Zinc Oxide Nanowires

DTIC Science & Technology

2012-06-01

From RADAR and SONAR , rocket propulsion, and the atomic bomb in World War II to the high tech drones, satellite imagery, surgically precise weapons...control from the four connectors shown in Figure scanner, preamplifier , step motor, and the bottom scanner. The connectors also electrically ground
An optimal contract approach to hospital financing.

PubMed

Boadway, Robin; Marchand, Maurice; Sato, Motohiro

2004-01-01

Existing models of hospital financing advocate mixed schemes which include both lump-sum and cost-based payments. The doctor is generally the unique decision maker, which is unrealistic in a hospital setting where both managers and doctors are involved. This paper develops a model in which managers and doctors are responsible for different decisions within the hospital. In this model, public authorities who provide the financing, hospital managers who allocate resources within the hospital, and doctors who assign patients to either a low-tech or a high-tech therapy have information of increasing quality on the casemix of patients. The public authorities sign with hospital managers contracts specifying some lump-sum financing and some size of a high-tech equipment. In turn, managers, who know the broad mix of patients in the hospital, sign with hospital doctors contracts that specify the non-medical resources allocated to this facility as well as some remuneration. Doctors, who know each patient's illness severity, select the patients to be treated by the high-tech facility, and receive from public authorities some fee-for-service payment that is differentiated according to the low- or high-tech treatment used for curing their patients. What emerges is a two-stage agency problem in which contracts are designed to elicit information in the most efficient way.
Aerodynamics of magnetic levitation (MAGLEV) trains

NASA Technical Reports Server (NTRS)

Schetz, Joseph A.; Marchman, James F., III

1996-01-01

High-speed (500 kph) trains using magnetic forces for levitation, propulsion and control offer many advantages for the nation and a good opportunity for the aerospace community to apply 'high tech' methods to the domestic sector. One area of many that will need advanced research is the aerodynamics of such MAGLEV (Magnetic Levitation) vehicles. There are important issues with regard to wind tunnel testing and the application of CFD to these devices. This talk will deal with the aerodynamic design of MAGLEV vehicles with emphasis on wind tunnel testing. The moving track facility designed and constructed in the 6 ft. Stability Wind Tunnel at Virginia Tech will be described. Test results for a variety of MAGLEV vehicle configurations will be presented. The last topic to be discussed is a Multi-disciplinary Design approach that is being applied to MAGLEV vehicle configuration design including aerodynamics, structures, manufacturability and life-cycle cost.
NASA Tech Briefs, October 1995. Volume 19, No. 10

NASA Technical Reports Server (NTRS)

1995-01-01

A special focus in this issue is Data acquisition and analysis. Topics covered include : Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Life Sciences; Mechanics; Machinery; Fabrication Technology; and Mathematics and Information Sciences. Also included in this issue are Laser Tech Briefs and Industry Focus: Motion Control/ Positioning Equipment
Impact of newer self-monitoring technology and brief phone-based intervention on weight loss: a randomized pilot study

PubMed Central

Ross, Kathryn M.; Wing, Rena R.

2016-01-01

Objective Despite the proliferation of newer self-monitoring technology (e.g., activity monitors and smartphone apps), their impact on weight loss outside of structured in-person behavioral intervention is unknown. Methods A randomized, controlled pilot study was conducted to examine efficacy of self-monitoring technology, with and without phone-based intervention, on 6-month weight loss in adults with overweight and obesity. Eighty participants were randomized to receive standard self-monitoring tools (ST, n=26), technology-based self-monitoring tools (TECH, n=27), or technology-based tools combined with phone-based intervention (TECH+PHONE, n=27). All participants attended one introductory weight loss session and completed assessments at baseline, 3 months, and 6 months. Results Weight loss from baseline to 6 months differed significantly between groups p=.042; there was a trend for TECH+PHONE (−6.4±1.2kg) to lose more weight than ST (−1.3±1.2kg); weight loss in TECH (−4.1±1.4kg) was between ST and TECH+PHONE. Fewer ST (15%) achieved ≥5% weight losses compared to TECH and TECH+PHONE (44%), p=.039. Adherence to self-monitoring caloric intake was higher in TECH+PHONE than TECH or ST, ps<.05. Conclusion These results suggest use of newer self-monitoring technology plus brief phone-based intervention improves adherence and weight loss compared to traditional self-monitoring tools. Further research should determine cost-effectiveness of adding phone-based intervention when providing self-monitoring technology. PMID:27367614

Computer systems and software engineering

NASA Technical Reports Server (NTRS)

Mckay, Charles W.

1988-01-01

The High Technologies Laboratory (HTL) was established in the fall of 1982 at the University of Houston Clear Lake. Research conducted at the High Tech Lab is focused upon computer systems and software engineering. There is a strong emphasis on the interrelationship of these areas of technology and the United States' space program. In Jan. of 1987, NASA Headquarters announced the formation of its first research center dedicated to software engineering. Operated by the High Tech Lab, the Software Engineering Research Center (SERC) was formed at the University of Houston Clear Lake. The High Tech Lab/Software Engineering Research Center promotes cooperative research among government, industry, and academia to advance the edge-of-knowledge and the state-of-the-practice in key topics of computer systems and software engineering which are critical to NASA. The center also recommends appropriate actions, guidelines, standards, and policies to NASA in matters pertinent to the center's research. Results of the research conducted at the High Tech Lab/Software Engineering Research Center have given direction to many decisions made by NASA concerning the Space Station Program.
Exploring Astrobiology: Future and In-Service Teacher Research Experiences

NASA Astrophysics Data System (ADS)

Cola, J.; Williams, L. D.; Snell, T.; Gaucher, E.; Harris, B.; Usselman, M. C.; Millman, R. S.

2009-12-01

The Georgia Tech Center for Ribosome Adaptation and Evolution, a center funded by the NASA Astrobiology Institute, developed an educational Astrobiology program titled, “Life on the Edge: Astrobiology.” The purpose of the program was to provide educators with the materials, exposure, and skills necessary to prepare our future workforce and to foster student interest in scientific discovery on Earth and throughout the universe. A one-week, non-residential summer enrichment program for high school students was conducted and tested by two high school educators, an undergraduate student, and faculty in the Schools of Biology, and Chemistry and Biochemistry at Georgia Tech. In an effort to promote and encourage entry into teaching careers, Georgia Tech paired in-service teachers in the Georgia Intern-Fellowship for Teachers (GIFT) program with an undergraduate student interested in becoming a teacher through the Tech to Teaching program. The GIFT and Tech to Teaching fellows investigated extremophiles which have adapted to life under extreme environmental conditions. As a result, extremophiles became the focus of a week-long, “Life on the Edge: Astrobiology” curriculum aligned with the Georgia Performance Standards in Biology. Twenty-five high school students explored the adaptation and survival rates for various types of extremophiles exposed to UV radiation and desiccation; students were also introduced to hands-on activities and techniques such as genomic DNA purification, gel electrophoresis, and Polymerase Chain Reaction (PCR). The impact on everyone invested and involved in the Astrobiology program including the GIFT and Tech to Teaching fellows, high school students, and faculty are discussed.
Toward healthy prisons: the TECH model and its applications.

PubMed

Ross, Michael W; Jo Harzke, Amy

2012-01-01

This paper aims to explore how the TECH Model (testing for and treating infectious diseases and vaccination; environmental modification to prevent disease transmission; chronic disease identification and treatment; and health maintenance and education) can be used for assessing and achieving healthy prisons. This paper explores the concepts of "health in prison" and "healthy prisons" in the context of recent research and guidance. The paper then considers the TECH Model as an approach to achieving healthy prisons. Under each of the four TECH Model domains are tasks to achieve a healthy prison. For prisons with poor or no resources, each domain contains steps that will improve prison health and move towards a healthy prison for both prisoners and staff. Implementation can thus be "low-TECH" or "high-TECH" depending on the setting and the available resources and the model is specifically designed to provide options for resource-poor as well as resource-rich correctional settings. The TECH Model is a first step in characterizing the components of a healthy prison and the processes to achieve this. This Model could be implemented in all levels of prisons internationally.
Re-conceptualsing Learning Spaces: Developing Capabilities in a High-Tech Small Firm.

ERIC Educational Resources Information Center

Macpherson, Allan; Jones, Ossie; Zhang, Michael; Wilson, Alison

2003-01-01

A case study of a small high-tech business explains how they created a virtual cluster of innovation through supply networks, enhancing their own learning and facilitating integration of knowledge. This process overcomes limitations to management learning for small companies in isolated regions. (Contains 66 references.) (SK)
Asia's New High-Tech Competitors: An SRS Special Report.

ERIC Educational Resources Information Center

Rausch, Lawrence M.

This report profiles nine economies linked by Asian identity, yet marked by great economic and technological disparity, in order to project which economies will be full-fledged participants and competitors in tomorrow's high-tech product markets. Based on the various indicators of technological activity and competitiveness presented in this…
Determining Studies Conducted upon Individuals with Autism Spectrum Disorder Using High-Tech Devices

ERIC Educational Resources Information Center

Eliçin, Özge; Kaya, Ali

2017-01-01

This study explores 67 experimental research articles written about children with Autism Spectrum Disorder using high-tech devices. The studies in this research were accessed through EBSCO, Academic Search Complete, ERIC, and Uludag University online search engines using keywords such as "autism and technology", "autism and…
Perceptions of Diversity Training Needs in High Tech Business.

ERIC Educational Resources Information Center

Lieberman, Devorah A.; Gurtov, Ellene

A study questioned 12 human resource personnel, corporation managers, and diversity trainers about their perceptions of diversity training needs in Pacific Northwest high tech organizations. The overarching research questions for the study were as follows: (1) What are the most frequently reported diversity training needs among human resource…
Development of High-Tech Skills.

ERIC Educational Resources Information Center

Theuerkauf, Walter E.

High tech systems not only generate new structures in the production process, but also involve profound changes in job organization, which in turn imply that job qualifications must be modified. In view of the changes within engineering systems and the relevant technologies, it seems expedient to choose a curricular approach based on the concepts…
Implementing a Project-Based Technology Program for High School Women.

ERIC Educational Resources Information Center

Boudria, Theodore J.

2002-01-01

Describes the successful implementation of a Women in Technology (WIT) Project-Based Learning Program in High Tech Manufacturing by the Tech Prep Consortium at Bristol Community College (Massachusetts). Reports that the program's success was mainly due to the establishment of partnerships with industry, government, and education, including area…
Aphasia vs. Apraxia

MedlinePlus

... tech system – Paper and pencil High-tech system – Computer program that produces voice output at keystroke Oral ... for Aphasia Actions Speak as Loud as Words Computers & Language Rehab From Singing to Speaking When the ...
A Policy-Relevant Instrumental Case Study of an Inclusive STEM-Focused High School: Manor New Tech High

ERIC Educational Resources Information Center

Lynch, Sharon J.; Spillane, Nancy; House, Ann; Peters-Burton, Erin; Behrend, Tara; Ross, Kathleen M.; Han, Edmund M.

2017-01-01

This instrumental case study of Manor New Tech High (MNTH) provides insight and understanding of a trend in U.S. education to create new STEM schools and increase the achievement of students underrepresented in STEM. MNTH was an inclusive, STEM-focused high school, in Manor, Texas. The creation of the school was stimulated by a statewide Texas…
LanzaTech- Capturing Carbon. Fueling Growth.

ScienceCinema

NONE

2018-01-16

LanzaTech will design a gas fermentation system that will significantly improve the rate at which methane gas is delivered to a biocatalyst. Current gas fermentation processes are not cost effective compared to other gas-to-liquid technologies because they are too slow for large-scale production. If successful, LanzaTech's system will process large amounts of methane at a high rate, reducing the energy inputs and costs associated with methane conversion.
High-Tech, Low-Tech, No-Tech: Communications Strategies During Blackouts

DTIC Science & Technology

2013-12-01

share radiation measurements; it was created within a week of the Fukushima nuclear disaster . More than 3.5 million data readings have already been...national nuclear crisis, especially as the extent of the disaster at the Fukushima Daiichi plant became known. This is where hyper-local communication...accompany major crises, particularly natural disasters such as severe weather events. Thus, during crises, communications are often severely hampered
Ada Software Design Methods Formulation.

DTIC Science & Technology

1982-10-01

aside for one-to-one, non -judgemental discussions between SofTech and the design teams. SofTech’s role in the meetings was to address any Ada-specific...assurance 1.0 prepare version audits 1.0 monitoring contracts 1.0 library control 1.0 other development 1.0 correspondence 1.0 conduct support design ...quality assurance 2.0 Control Board update training manuals 2.0 participation 2.5 being trained 2.0 formulation of policy 2.5 functional system design
Memory function and supportive technology

PubMed Central

Charness, Neil; Best, Ryan; Souders, Dustin

2013-01-01

Episodic and working memory processes show pronounced age-related decline, with other memory processes such as semantic, procedural, and metamemory less affected. Older adults tend to complain the most about prospective and retrospective memory failures. We introduce a framework for deciding how to mitigate memory decline using augmentation and substitution and discuss techniques that change the user, through mnemonics training, and change the tool or environment, by providing environmental support. We provide examples of low-tech and high-tech memory supports and discuss constraints on the utility of high-tech systems including effectiveness of devices, attitudes toward memory aids, and reliability of systems. PMID:24379752
A World of Competitors: Assessing the US High-Tech Advantage and the Process of Globalisation

ERIC Educational Resources Information Center

Douglass, John Aubrey

2008-01-01

Research universities throughout the world are part of a larger effort by countries to bolster science and technological innovation and compete economically. The United States remains highly competitive as a source of high-tech innovation because of a number of market positions, many the results of long-term investments in institutions (such as…
Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

ERIC Educational Resources Information Center

Le, Thanh; Tang, Kam Ki

2015-01-01

This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…
Case Study of Manor New Tech High School: Promising Practices in STEM Education for Comprehensive High Schools

ERIC Educational Resources Information Center

Gourgey, Hannah; Asiabanpour, Bahram; Fenimore, Carol

2010-01-01

The following paper culminates a year of research conducted by researchers at E[superscript 3] Alliance and Texas State University and sponsored by the National Science Foundation. The following reports on promising practices observed and reported at Manor New Tech High School (MNTH), a Texas Science Technology Engineering Mathematics (T-STEM)…
Establishment of Laricobius nigrinus (Coleoptera: Derodontidae) for biological control of hemlock woolly adelgid

Treesearch

Scott M. Salom; Loke T. Kok; David L. Mausel; Theresa A. Dellinger; Brian M. Eisenback; Robbie W. Flowers

2007-01-01

Laricobius nigrinus is a natural predator of hemlock woolly adelgid (HWA), native to the western hemlock forests of North America. Research over the past 8 years at Virginia Tech has shown that this prey-specific predator is highly adapted to HWA. Several ongoing studies were reported on and will briefly be mentioned here.
Hartford Hospital surgeons share publicity with robot 'assistants.'.

PubMed

Botvin, Judith D

2004-01-01

Hartford Hospital, Hartford, Conn. finds some patients gravitate to Boston or New York City for high-tech procedures. Being the first Connecticut hospital with the daVinci Robotic Surgery System, it developed an advertising campaign emphasizing high-tech surgery with the human touch. Hartford also broadcast a robotic prostatectomy on its popular live webcast series.

High Tech and the Upward Mobility of Non-Technical People.

ERIC Educational Resources Information Center

Kammire, Linda L.

The social and psychological effects of rapid technological advancement in the computer industry is the subject of this paper, which focuses on the concerns of people with non-technical backgrounds. It describes the career series, High Tech for Non-Technical People, created by the Georgia State University Career Development Center. The three…
Human Resource Blueprints in Irish High-Tech Start-Up Firms

ERIC Educational Resources Information Center

Keating, Mary A.; Olivares, Mariabrisa

2006-01-01

Focusing on Irish high-tech start-ups, this paper reports on the results of an empirical study of organization building by entrepreneurial firms, specifically in relation to human resource practices. The research findings are benchmarked with findings from SPEC, the Stanford Project of Emerging Companies (Baron and Hannan, 2002). Human resources…
Planning and Designing Today's Career Tech Facility

ERIC Educational Resources Information Center

Seaman, James

2010-01-01

During the past 20 years, career and technical education (CTE) has gone through significant changes. CTE has evolved in response to the changes technology has had on the job market. Preparing students for high-tech, high-skill job opportunities is the new focus. The facilities that house these programs, however, have not kept pace with these…
Spaces of Innovation: Experiences from Two Small High-Tech Firms

ERIC Educational Resources Information Center

Heiskanen, Tuula; Heiskanen, Hannu

2011-01-01

Purpose: By comparing two small high-tech firms specialising in medical technology this article seeks to answer the following questions: What are the key characteristics of innovation processes in the case firms? How do the mutual relationships between mental, social and physical spaces explain the different pathways in the innovation processes in…
Women and Minorities in High-Tech Careers. ERIC Digest No. 226.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Women and minorities are underrepresented in technology-related careers for many reasons, including lack of access, level of math and science achievement, and emotional and social attitudes about computer capabilities. Schools and teachers can use the following strategies to attract women and minorities to high-tech careers and prepare them for…
West Europe Report, Science and Technology

DTIC Science & Technology

1986-03-17

30 Nov 85) 51 High Tech Parks To Be Built Near Madrid, Barcelona TIEMPO, 27 Jan 86; LA VANGUARDIA , 23 Jan 86) 54 Fast-Growing Center, by Manuel...of the most important high tech parks in the country. And all thanks to the influence of "Mr Chip." Barcelona Park Barcelona LA VANGUARDIA in
Access to high-tech health care. Ethics.

PubMed

Merrill, J M

1991-03-15

Access to health care has always been limited by personal and social economics. Poverty remains one element that correlates with poor prognosis in all varieties of cancer. Prior to becoming standard therapy, elements of high-tech health care are often widely available as research protocols, participation in which is generally available without considerations of insurance coverage or personal wealth. Any person may still volunteer participation in research protocols and thereby partake in high-tech advances even before these become standard therapy. However, recent developments in the conduct of research now may limit participation. Medicare and third party insurance payers proscribe payment for research project care and always have. Recently, more than ever before, reimbursements to physicians and health care institutions have been more closely scrutinized to reject all payment in research settings. In situations in which cost and availability of the new technology, whether machine or drug, limit participation, research entrepreneurs have made research participation available to only those who can pay for it. These and similar developments threaten to limit access to high-tech health care and to actually impede cancer research.
Effects of an Abbreviated Obesity Intervention Supported by Mobile Technology: The ENGAGED Randomized Clinical Trial

PubMed Central

Spring, Bonnie; Pellegrini, Christine A.; Pfammatter, Angela; Duncan, Jennifer M.; Pictor, Alex; McFadden, H. Gene; Siddique, Juned; Hedeker, Donald

2017-01-01

Objectives To determine the effects on weight loss of three abbreviated behavioral weight loss interventions with and without coaching and mobile technology. Methods Randomized controlled efficacy study of three six-month weight loss treatments delivered to 96 adults with obesity: 1) self-guided [SELF], 2) standard [STND], or 3) technology-supported [TECH]. STND and TECH received 8 in-person group treatment sessions. SELF and STND used paper diaries to self-monitor diet, activity, and weight; TECH used a smartphone application with social networking features and wireless accelerometer. Results Weight loss was greater for TECH and STND than SELF at 6 months [−5.7kg (95% CI: −7.2, −4.1) vs. −2.7kg (95% CI: −5.1, −0.3), p<.05]), but not 12 months. TECH and STND did not differ except that more STND (59%) than TECH (34%) achieved ≥5% weight loss at 6 months (P < 0.05). Self-monitoring adherence was greater in TECH than STND (P <0.001), greater in both interventions than SELF (P <0.001), and covaried with weight loss (r(84) = 0.36 − 0.51, P<.001). Conclusions Abbreviated behavioral counseling can produce clinically meaningful weight loss regardless of whether self-monitoring is performed on paper or smartphone, but long-term superiority over standard of care self-guided treatment is challenging to maintain. PMID:28494136
Exploring cognitive support use and preference by college students with TBI: A mixed-methods study.

PubMed

Brown, Jessica; Hux, Karen; Hey, Morgan; Murphy, Madeline

2017-01-01

Many college students with TBI rely on external strategies and supports to compensate for persistent memory, organization, and planning deficits that interfere with recalling and executing daily tasks. Practitioners know little, however, about the supports students with TBI choose for this purpose, the reasoning behind their choice, or preferred features of selected supports. The purpose of this study was to explore these issues. We collected and analyzed quantitative and qualitative data from eight college students with TBI for completion of a concurrent triangulation mixed-methods design. Data analysis included evaluation and triangulation of participant demographic information, survey responses about persistent post-injury symptoms, transcripts from semi-structured interviews about cognitive support devices and strategies, and ranking results about specific compensatory tools. Results suggest that college students with TBI prefer high-tech external supports-sometimes with the addition of low-tech, paper supports-to assist them in managing daily tasks. This preference related to features of portability, accessibility, and automatic reminders. An electronic calendar was the most-preferred high-tech support, and a paper checklist was the most-preferred low-tech support. Rehabilitation professionals should consider implementing high-tech supports with preferred characteristics during treatment given the preferences of students with TBI and the consequent likelihood of their continued long-term use following reintegration to community settings.
Universities, the US High Tech Advantage, and the Process of Globalization. Research & Occasional Paper Series: CSHE.8.2008

ERIC Educational Resources Information Center

Douglass, John Aubrey

2008-01-01

Research universities throughout the world are part of a larger effort by nation-states to bolster science and technological innovation and compete economically. The US remains highly competitive as a source of High Tech (HT) innovation because of a number of market positions, many the result of long term investments in institutions such as…
Project DATA-TECH. 1990-91 Final Evaluation Profile. OREA Report.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Office of Research, Evaluation, and Assessment.

An evaluation was done of New York City Public Schools' Project DATA-TECH, which served limited English proficient high school students interested in computer-aided drafting (CAD) and cosmetology programs. The program served 190 students at Sara J. Hale High School in Brooklyn, of whom 89.5 percent were eligible for the Free Lunch Program and most…
Low-Tech Laser Learning: Can Less Be More?

ERIC Educational Resources Information Center

Tatsuki, Donna Hurst

1997-01-01

Examines an alternative to high-powered, high-tech use of laser disk technology in teaching English as a Second Language. Points out that there has not been a rush to install this technology because of cost, scarcity of courseware, incompatibility of the various delivery systems and the time investment/technical expertise required of the teacher.…
Organizational Attributes and Learning beyond the Boundaries: Comparative Case Studies of Two High-Tech Firms

ERIC Educational Resources Information Center

Zhong, Jing; Wu, Sizong; Li, Jun

2008-01-01

This study compares two high-tech firms in terms of their differences in organizational characteristics and learning activities beyond the boundaries. It finds that the larger company continuously develops new technology to achieve long-term survival through a balance between exploration and exploitation while the smaller enterprise grows quickly…
Defense.gov Special Report: Travels With Lynn - April 2011

Science.gov Websites

Department of Defense Submit Search April 2011 News Photos Top Stories Lynn Opens New High-tech Countertrafficking Center NAVAL AIR STATION KEY WEST, Fla., April 19, 2011 - A new, high-tech command center at Naval & Security Link Disclaimer Recovery Act FOIA USA.gov No FEAR Act Plain Writing Act of 2010
Neuroscientific Investigator of High Mathematical Ability: An Interview with Michael W. O'Boyle

ERIC Educational Resources Information Center

Kalbfleisch, M. Layne

2008-01-01

This article presents an interview with Michael W. O'Boyle, a neuroscientific investigator of high mathematical ability. O'Boyle is a professor in the Department of Human Development and Family Studies, Texas Tech University, and Adjunct Professor of Pharmacology and Neuroscience, School of Medicine, Texas Tech University Health Sciences Center.…
High-Tech Betrayal: Working and Organizing on the Shop Floor.

ERIC Educational Resources Information Center

Devinatz, Victor G.

This book, which is based on a 7-month ethnographic study of working conditions and employment practices at a biomedical electronics factory, examines the impact that high tech has had on the relationship between management and workers in the manufacturing industry. The following are among the topics discussed in the book's 10 chapters: (1) the…
Air Force Needs Better Processes to Appropriately Justify and Manage Cost-Reimbursable Contracts

DTIC Science & Technology

2013-03-21

Contracts Reviewed 4 The Small Business Innovation Research Program 4 Review of Internal Controls 5 ...stimulate high-tech innovation, and increase private-sector commercialization. The SBIR 5 program was established under the Small Business...contracts valued at about $7.4 billion. 5 According to the Office of Federal Procurement Policy, a hybrid contract allows contracting officers to
DOE Office of Scientific and Technical Information (OSTI.GOV)

Conway, R.

This article describes a petrol (gasoline) engine development project to combine the duel technologies of an Otto cycle engine with a modified cooling system and a high-tech processor-controlled bottoming cycle to harness not only the waste heat from the exhaust gases but also a significant proportion of the heat lost by a conventional petrol engine to the water coolant, resulting in a very substantial increase in energy conversion efficiency.
Ecological Network Analysis for a Low-Carbon and High-Tech Industrial Park

PubMed Central

Lu, Yi; Su, Meirong; Liu, Gengyuan; Chen, Bin; Zhou, Shiyi; Jiang, Meiming

2012-01-01

Industrial sector is one of the indispensable contributors in global warming. Even if the occurrence of ecoindustrial parks (EIPs) seems to be a good improvement in saving ecological crises, there is still a lack of definitional clarity and in-depth researches on low-carbon industrial parks. In order to reveal the processes of carbon metabolism in a low-carbon high-tech industrial park, we selected Beijing Development Area (BDA) International Business Park in Beijing, China as case study, establishing a seven-compartment- model low-carbon metabolic network based on the methodology of Ecological Network Analysis (ENA). Integrating the Network Utility Analysis (NUA), Network Control Analysis (NCA), and system-wide indicators, we compartmentalized system sectors into ecological structure and analyzed dependence and control degree based on carbon metabolism. The results suggest that indirect flows reveal more mutuality and exploitation relation between system compartments and they are prone to positive sides for the stability of the whole system. The ecological structure develops well as an approximate pyramidal structure, and the carbon metabolism of BDA proves self-mutualistic and sustainable. Construction and waste management were found to be two active sectors impacting carbon metabolism, which was mainly regulated by internal and external environment. PMID:23365516
Technology Cost and Schedule Estimation (TCASE) Final Report

NASA Technical Reports Server (NTRS)

Wallace, Jon; Schaffer, Mark

2015-01-01

During the 2014-2015 project year, the focus of the TCASE project has shifted from collection of historical data from many sources to securing a data pipeline between TCASE and NASA's widely used TechPort system. TCASE v1.0 implements a data import solution that was achievable within the project scope, while still providing the basis for a long-term ability to keep TCASE in sync with TechPort. Conclusion: TCASE data quantity is adequate and the established data pipeline will enable future growth. Data quality is now highly dependent the quality of data in TechPort. Recommendation: Technology development organizations within NASA should continue to work closely with project/program data tracking and archiving efforts (e.g. TechPort) to ensure that the right data is being captured at the appropriate quality level. TCASE would greatly benefit, for example, if project cost/budget information was included in TechPort in the future.

[New risks of addiction for new populations: the example of hackers].

PubMed

Tisserand, I N

2000-10-01

Our purpose was to examine recent social and technical habits related to high-tech environments. Our goal was to show that the prevention of risk behaviors due to training in data processing, requires an interdisciplinary approach where medical anthropology could benefit from and exchange of complementary information sources (particularly from psychiatrics and psychoanalysis). We used this approach to search for solutions regarding new kinds of addiction. When identifying pathological conditions and proposing appropriate care, these solutions must take into consideration the progressive loss of human nature in data processing environments and the very important and highly sophisticated relationship established between the human being and the computer. We looked at the hacker population as a modern tribe and marginal group. Our analysis led to a better understanding of this kind of artificial culture, sometimes called a "high-tech" or "cyber" culture. The hacker population is integrating new rituals, languages and special rhythms which induce addictions. We show how high-tech environments operating in e-time and e-life induce addictions. This work illustrates a classical anthropological approach to the question (ethnological fields, interviews, literature analysis). The major challenge is to explain how high-tech environments present high risks for dependency in the hacker population and other, unwarned, computer (ab)users.
Crew Integration & Automation Testbed and Robotic Follower Programs

DTIC Science & Technology

2001-05-30

Evolving Technologies for Reduced Crew Operation” Vehicle Tech Demo #1 (VTT) Vehicle Tech Demo #2 ( CAT ATD) Two Man Transition Future Combat...Simulation Advanced Electronic Architecture Concept Vehicle Shown with Onboard Safety Driver Advanced Interfaces CAT ATD Exit Criteria...Provide 1000 Hz control loop for critical real-time tasks CAT Workload IPT Process and Product Schedule Crew Task List Task Timelines Workload Analysis
Effects of an abbreviated obesity intervention supported by mobile technology: The ENGAGED randomized clinical trial.

PubMed

Spring, Bonnie; Pellegrini, Christine A; Pfammatter, Angela; Duncan, Jennifer M; Pictor, Alex; McFadden, H Gene; Siddique, Juned; Hedeker, Donald

2017-07-01

To determine the effects on weight loss of three abbreviated behavioral weight loss interventions with and without coaching and mobile technology. A randomized controlled efficacy study of three 6-month weight loss treatments was conducted in 96 adults with obesity: 1) self-guided (SELF), 2) standard (STND), or 3) technology-supported (TECH). STND and TECH received eight in-person group treatment sessions. SELF and STND used paper diaries to self-monitor diet, activity, and weight; TECH used a smartphone application with social networking features and wireless accelerometer. Weight loss was greater for TECH and STND than SELF at 6 months (-5.7 kg [95% confidence interval: -7.2 to -4.1] vs. -2.7 kg [95% confidence interval: -5.1 to -0.3], P < 0.05) but not 12 months. TECH and STND did not differ except that more STND (59%) than TECH (34%) achieved ≥ 5% weight loss at 6 months (P < 0.05). Self-monitoring adherence was greater in TECH than STND (P < 0.001), greater in both interventions than SELF (P < 0.001), and covaried with weight loss (r(84) = 0.36-0.51, P < 0.001). Abbreviated behavioral counseling can produce clinically meaningful weight loss regardless of whether self-monitoring is performed on paper or smartphone, but long-term superiority over standard of care self-guided treatment is challenging to maintain. © 2017 The Obesity Society.
Capturing the real value in high-tech acquisitions.

PubMed

Chaudhuri, S; Tabrizi, B

1999-01-01

Eager to stay ahead of fast-changing markets, more and more high-tech companies are going outside for competitive advantage. Last year in the United States alone, there were 5,000 high-tech acquisitions, but many of them yielded disappointing results. The reason, the authors contend, is that most managers have a shortsighted view of strategic acquisitions--they focus on the specific products or market share. That focus might make sense in some industries, where those assets can confer substantial advantages, but in high tech, full-fledged technological capabilities--tied to skilled people--are the key to long-term success. Instead of simply following the "buzz," successful acquires systematically assess their own capability needs. They create product road maps to identify holes in their product line. While the business group determines if it can do the work in-house, the business development office scouts for opportunities to buy it. Once business development locates a candidate, it conducts an expanded due diligence, which goes beyond strategic, financial, and legal checks. Successful acquires are focused on long-term capabilities, so they make sure that the target's products reflect a real expertise. They also look to see if key people would be comfortable in the new environment and if they have incentives to stay on board. The final stage of a successful acquisition focuses on retaining the new people--making sure their transition goes smoothly and their energies stay focused. Acquisitions can cause great uncertainty, and skilled people can always go elsewhere. In short, the authors argue, high-tech acquisitions need a new orientation around people, not products.
A Study of the Influence of Learning Organization on Organizational Creativity and Organizational Communication in High Tech Technology

ERIC Educational Resources Information Center

Duan, Qingying

2017-01-01

The value of a high-tech industry no longer lies in the number of plants, equipment, and products but the intellectual property, customer confidence, capability of collaborating with business partners, telecommunication infrastructure, and the creativity potential and skills of its employees. This study is motivated by investigating the way of…
How Is Corporate Social Responsibility Addressed by Biotech Firms? a Case Study Analysis

ERIC Educational Resources Information Center

Pérez-Bustamante, Guillermo

2013-01-01

This paper explores corporate social responsibility (CSR) in the biotech high-tech sector as a way to achieve competitive advantages. After presenting the importance of science for high-tech firms, the paper focuses on the social and economic role of CSR. Next, the primary reasons for firms' engagement in CSR activities are presented, followed by…
Adolescent's Perceptions of Deviance When Using Technology: The Approaching Post-Typographic Culture

ERIC Educational Resources Information Center

Daniel, Annie J.

2005-01-01

Background: Deviant behavior on the computer and the Internet is rising as technology use increases (Hollinger, 1996b ; Power, 2000; Vatis, 2000). Recently, there has been an increase in the number of high tech crimes by adolescents. According to the U.S. Department of Justice (2005), teens have gone high tech with old fashion bullying, stalking…
Are You What You Eat? An inside Look at High-Tech Food

ERIC Educational Resources Information Center

Miller, Roxanne Greitz

2007-01-01

If we abide by the familiar saying "you are what you eat," it is understandable that people may be concerned with the incredible advances in food science technology and their possible impacts on human health. For example, in recent years high-tech scientific processes such as genetic modification, irradiation, and cloning have all been used to…
Tech Gets Physical

ERIC Educational Resources Information Center

Ravage, Barbara

2011-01-01

As colleges push for increased efficiencies, facilities departments nationwide are turning more and more to high-tech approaches. Nowhere has this trend been more visible than in the realm of energy consumption, where managers hope to extract significant cost savings. Technology is helping facilities managers achieve significant efficiencies,…
US Army War College Key Strategic Issues List

DTIC Science & Technology

2006-07-01

Soldier vs contractor operated and maintained tactical equipment. Are the new soldier systems so " high tech " that we cannot fight wars without contractors...approaches to meet the high tech skills demanded by our transformation TOEs? (G-3 ACD) 9. War and Society: a. Has the Army adapted from Industrial-Age...61 United States Military Academy ...................................... 65 U.S. Army Corps of Engineers
U.S. Army War College: Key Strategic Issues List

DTIC Science & Technology

2006-07-01

Protocol (EoIP) b. Soldier vs contractor operated and maintained tactical equipment. Are the new soldier systems so “ high tech ” that we cannot fight...approaches to meet the high tech skills demanded by our transformation TOEs? (G-3 ACD) 9. War and Society: a. Has the Army adapted from Industrial-Age to...61 United States Military Academy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 U.S. Army Corps of Engineers
Skill Acquisition in "High Tech" Export Agriculture: A Case Study of Lifelong Learning in Peru's Asparagus Industry

ERIC Educational Resources Information Center

Carnoy, Martin; Luschei, Thomas F.

2008-01-01

As one of the world's largest exporters of asparagus, Peru has developed a high-tech system of asparagus production, processing and delivery that requires well-trained and responsive workers. In this study we examine the role of both private and public sectors in preparing workers for the asparagus industry and the implications of this skill…
Crosscutting Technology Development at the Center for Advanced Separation Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christopher Hull

2009-10-31

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginiamore » Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.« less
The First Robotics Rocket City Regional Competition

NASA Image and Video Library

2018-03-16

Johnny Stephenson, director of NASA Marshall Space Flight Center's Office of Strategic Analysis & Communications, addresses the crowd during the March 16 award ceremony following the first day of competition at the FIRST Robotics Rocket City Regional at the Von Braun Center in Huntsville. Ed Sparks, of the Morgan County Mech Tech team, received the award for Volunteer of the Year at the March 16 award ceremony. Mech Tech, comprised of students from five high schools in Morgan County, Alabama, also won the Industrial Design Award. The team was one of three regional finalists that will advance to the FIRST national championships April 18-21 in Houston. The other two regional finalists were Burning Magnetos of Fort Dorchester High School in North Charleston, South Carolina, and OGRE of Opelika High School in Opelika, Alabama. Mech Tech and Golden Hurricane from Columbia High School in Huntsville, were "house" teams sponsored by Marshall.
A Concept of Constructing a Common Information Space for High Tech Programs Using Information Analytical Systems

NASA Astrophysics Data System (ADS)

Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.

2016-04-01

The paper deals with the issues in program management used for engineering innovative products. The existing project management tools were analyzed. The aim is to develop a decision support system that takes into account the features of program management used for high-tech products: research intensity, a high level of technical risks, unpredictable results due to the impact of various external factors, availability of several implementing agencies. The need for involving experts and using intelligent techniques for information processing is demonstrated. A conceptual model of common information space to support communication between members of the collaboration on high-tech programs has been developed. The structure and objectives of the information analysis system “Geokhod” were formulated with the purpose to implement the conceptual model of common information space in the program “Development and production of new class mining equipment - “Geokhod”.
DoD Science and Engineering Apprenticeship Program for High-School Students

DTIC Science & Technology

1995-06-01

Mu Alpha Theta for Computers, Calculus, Integral Calculus, and Precalculus ; 1994 Georgia Tech Distinguished Math Scholar; Captain of First Place...Computers. Calr.uIns. TntPg^i Painii»«. and Precalculus ; 1994 Georgia Tech Distinguished Math Scholar;.Captain of.First.Place Brain Bowl
Controlling Fundamentals in High-Energy High-Rate Pulsed Power Materials Processing of Powdered Tungsten, Titanium Aluminides, and Copper-Graphite Composites

DTIC Science & Technology

1990-10-01

phase systems such as tungsten; plastic flow of a minor low -temperature phase in a two phase non-interacting system such as tungsten- copper ; and...consolidation heat treatment. The de- the wetting of graphite by copper or during consolidation by this tech- tailed phase transformation evolution other...The driving potential for this solid state phase transformation is the free surface energy associated with the total powder particle surface area in the
Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries.

PubMed

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance-performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA-DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed.
Low-Tech High-Tech.

ERIC Educational Resources Information Center

Hart, Tom

1997-01-01

Outlines how Compact Disc-interactive (CD-i)--software that looks like a CD-ROM but operates independently using a television set--can be used in elementary, secondary, and vocational education. Discusses the cost effectiveness of CD-i and compares costs and operational issues with CD-ROM. Describes special features of one CD-i program,…
Low-Tech Education Threatens the High-Tech Future.

ERIC Educational Resources Information Center

Business Week, 1983

1983-01-01

Indicating that the quality of scientific/technical education in the United States has been slipping since the brief surge of attention in the decade following Sputnik, discusses the need for upgrading science/technical education. Includes efforts currently under way, including financial support by industry and donations of equipment and computers…

Examination of the New Tech Model as a Holistic Democracy

ERIC Educational Resources Information Center

Bradley-Levine, Jill; Mosier, Gina

2017-01-01

Using the Degrees of Democracy Framework (Woods & Woods, 2012), we examined eight New Tech (NT) high schools to determine the extent to which they demonstrated characteristics of holistic democracy. We collected qualitative data, including observations and interviews during the fourth year of implementation. Findings indicated that the eight…
Recruitment and Selection of Minorities in High-Tech Organizations. A Sociological Perspective.

DTIC Science & Technology

1984-09-01

Gretchen M. Luebbe Doris R. Entwisle Nancy A. Madden Joyce L. Epstein Kirk Nabors James Fennessey Alejandro Portes Denise C. Gottfredson Donald C. Rickert...Jr. Gary D. Gottfredson Laura Hersh Salganik Linda S. Gottfredson Robert E. Slavin Edward J. Harsch Jane St. John John H. Hollifield Valarie...and intelligence --as the primary determinants of minority and female underrepresentation in high-tech occupations. Despite voluminous research
CAD/CAM Helps Build Better Bots: High-Tech Design and Manufacture Draws Engineering-Oriented Students

ERIC Educational Resources Information Center

Van Name, Barry

2012-01-01

There is a battlefield where no quarter is given, no mercy shown, but not a single drop of blood is spilled. It is an arena that witnesses the bringing together of high-tech design and manufacture with the outpouring of brute force, under the remotely accessed command of some of today's brightest students. This is the world of battling robots, or…
Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

PubMed

Barber, Larissa K; Cucalon, Maria S

2017-12-01

University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.
Construction of a high-tech operating room for image-guided surgery using VR.

PubMed

Suzuki, Naoki; Hattori, Asaki; Suzuki, Shigeyuki; Otake, Yoshito; Hayashibe, Mitsuhiro; Kobayashi, Susumu; Nezu, Takehiko; Sakai, Haruo; Umezawa, Yuji

2005-01-01

This project aimed to construct an operating room to implement high dimensional (3D, 4D) medical imaging and medical virtual reality techniques that would enable clinical tests for new surgical procedures. We designed and constructed such an operating room at Dai-san Hospital, the Jikei Univ. School of Medicine, Tokyo, Japan. The room was equipped with various facilities for image-guided, robot and tele- surgery. In this report, we describe an outline of our "high-tech operating room" and future plans.
The Effectiveness of the High-Tech Speech-Generating Device with Proloquo2Go App in Reducing Echolalia Utterances in a Student with Autism

ERIC Educational Resources Information Center

Alrusayni, Norah

2017-01-01

This study was conducted to determine the effectiveness of using the high-tech speech-generating device with Proloquo2Go app to reduce echolalic utterances in a student with autism during conversational speech. After observing that the iPad device with several apps was used by the students and that it served as a communication device, language…
An Analysis of Information Systems Technology Initiatives and Small Businesses in the DoD Small Business Innovation Research (SBIR) Program

DTIC Science & Technology

2012-09-01

PAGE INTENTIONALLY LEFT BLANK xv LIST OF ACRONYMS AND ABBREVIATIONS CAE Component Acquisition Executive COTS Commercial Off-The-Shelf DARPA...and reduce program lifecycle costs by expanding the pool of vendors and incorporating small innovative high -tech businesses in defense IT...acquisition. Particularly within the high -tech IT sector, small businesses have been consistently recognized as exceptional resources for the research and
Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries

PubMed Central

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance–performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA–DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed. PMID:27139697
Entrepreneurship.

PubMed

Yetisen, Ali K; Volpatti, Lisa R; Coskun, Ahmet F; Cho, Sangyeon; Kamrani, Ehsan; Butt, Haider; Khademhosseini, Ali; Yun, Seok Hyun

2015-01-01

High-tech businesses are the driving force behind global knowledge-based economies. Academic institutions have positioned themselves to serve the high-tech industry through consulting, licensing, and university spinoffs. The awareness of commercialization strategies and building an entrepreneurial culture can help academics to efficiently transfer their inventions to the market to achieve the maximum value. Here, the concept of high-tech entrepreneurship is discussed from lab to market in technology-intensive sectors such as nanotechnology, photonics, and biotechnology, specifically in the context of lab-on-a-chip devices. This article provides strategies for choosing a commercialization approach, financing a startup, marketing a product, and planning an exit. Common reasons for startup company failures are discussed and guidelines to overcome these challenges are suggested. The discussion is supplemented with case studies of successful and failed companies. Identifying a market need, assembling a motivated management team, managing resources, and obtaining experienced mentors lead to a successful exit.
Teacher Development Program for ATP 2000. Project Report.

ERIC Educational Resources Information Center

Sutphin, Dean; And Others

Agri Tech Prep 2000 (ATP 2000) is a 4-year tech prep program linking high school and postsecondary curricula designed to prepare New York students for careers in agriculture or acceptance into a college program in agriculture. Because teacher development was designated an integral project component for fiscal year 1991-1992, a weeklong teacher…
Educating Silicon Valley: Corporate Education Reform and the Reproduction of the Techno-Economic Revolution

ERIC Educational Resources Information Center

Williamson, Ben

2017-01-01

Silicon Valley's high-tech companies, tech-philanthropists, startups, and culture of venture capital are "the centre of a techno-economic revolution" that is "now spreading outwards across the world, with major societal effects and implications" (Duff 2016, 5). In this article, Ben Williamson traces and maps how education is…
Job Future's Bright for the Chefs of Muskingum Tech.

ERIC Educational Resources Information Center

Hoffman, Carl

1993-01-01

A two-year culinary arts program at Muskingum College (Zanesville, Ohio) prepares students for jobs in an emerging service-based economy. Students receive intensive classroom instruction and hands-on learning in a high-tech kitchen. Twenty-five full-time and 12 part-time students are completing their first year in the program. (LP)
Tech Prep Program in Financial Services. Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

A tech prep program in financial services, called Chicago Academy of Finance, was developed at Jones Metropolitan High School of Business and Commerce in Chicago, Illinois. The program was designed to integrate vocational and academic skills, with an emphasis on critical thinking skills. Of the 39 students initially enrolling in the first…
Combining Technology and Narrative in a Learning Environment for Workplace Training.

ERIC Educational Resources Information Center

Nelson, Wayne A.; Wellings, Paula; Palumbo, David; Gupton, Christine

In a project designed to provide training for entry-level job skills in high tech industries, a combination of narrative and technology was employed to aid learners in developing the necessary soft skills (dependability, responsibility, listening comprehension, collaboration, et cetera) sought by employers. The EnterTech Project brought together a…
Evaluating Assistive Technology in the Education of Persons with Severe Disabilities

ERIC Educational Resources Information Center

Reichle, Joe

2011-01-01

This commentary includes a brief discussion of issues raised by the articles and systematic review contained in this special issue addressing technology applications for persons with severe developmental disabilities. Topical areas include a discussion of: (1) a need to compare "high tech" with "low tech" applications, (2) procedural fidelity, (3)…
Teaching and Learning: Hokie Spirit

ERIC Educational Resources Information Center

Lindeman, Cheryl A.

2007-01-01

If teachers were to reflect about their most difficult teachable moments in their careers, the author is sure the Virginia Tech tragedy would be extremely taxing on their minds. For those teachers teaching high school seniors, who were in the process of sending deposits to Virginia Tech, it was particularly agonizing. In this article, the author…
Applications of Human Performance Models to System Design: Defense Research Series. Volume 2

DTIC Science & Technology

1989-01-01

definition of display-ccntrol task demands. For first use, derivation is manual. For initial aplication , the sources of data for estimating task...describing human operator control of slowly responding complex systems. Delft (The Netherlands) Delft Univ. Tech., 235 pp., Ph.D. Thesis . Kok, J.J. and...Netherlands), Delft Univ. Tech., 157 pp., Ph.D. Thesis . van Lunteren, A. and Stassen, H.G. (1967). Investigations on the charac- teristics of the
Technology Components as Adjuncts to Family-Based Pediatric Obesity Treatment in Low-Income Minority Youth.

PubMed

Tripicchio, Gina L; Ammerman, Alice S; Neshteruk, Cody; Faith, Myles S; Dean, Kelsey; Befort, Christie; Ward, Dianne S; Truesdale, Kimberly P; Burger, Kyle S; Davis, Ann

2017-12-01

Strategies to treat pediatric obesity are needed, especially among high-need populations. Technology is an innovative approach; however, data on technology as adjuncts to in-person treatment programs are limited. A total of 64 children [body mass index (BMI) ≥85th percentile, mean age = 9.6 ± 3.1 years, 32.8% female, 84.4% Hispanic] were recruited to participate in one of three cohorts of a family-based behavioral group (FBBG) treatment program: FBBG only, TECH1, and TECH2. Rolling, nonrandomized recruitment was used to enroll participants into three cohorts from May 2014 to February 2015. FBBG began in May 2014 and received the standard, in-person 12-week treatment only (n = 21); TECH1 began in September 2014 and received FBBG plus a digital tablet equipped with a fitness app (FITNET) (n = 20); TECH2 began in February 2015 and received FBBG and FITNET, plus five individually tailored TeleMed health-coaching sessions delivered via Skype (n = 23). Child BMI z-score (BMI-z) was assessed at baseline and postintervention. Secondary aims examined weekly FBBG attendance, feasibility/acceptability of FITNET and Skype, and the effect of technology engagement on BMI-z. FBBG and TECH1 participants did not show significant reductions in BMI-z postintervention [FBBG: β = -0.05(0.04), p = 0.25; TECH1: β = -0.006(0.06), p = 0.92], but TECH2 participants did [β = -0.09(0.02), p < 0.001] and TeleMed session participation was significantly associated with BMI-z reduction [β = -0.04(0.01), p = 0.01]. FITNET use and FBBG attendance were not associated with BMI-z in any cohort. Overall, participants rated the technology as highly acceptable. Technology adjuncts are feasible, used by hard-to-reach participants, and show promise for improving child weight status in obesity treatment programs.
Robotic technology evolution and transfer

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.

1992-01-01

A report concerning technology transfer in the area of robotics is presented in vugraph form. The following topics are discussed: definition of technology innovation and tech-transfer; concepts relevant for understanding tech-transfer; models advanced to portray tech-transfer process; factors identified as promoting tech-transfer; factors identified as impeding tech-transfer; what important roles do individuals fulfill in tech-transfer; federal infrastructure for promoting tech-transfer; federal infrastructure for promoting tech-transfer; robotic technology evolution; robotic technology transferred; and recommendations for successful robotics tech-transfer.
Forming system of strategic innovation management at high-tech engineering enterprises

NASA Astrophysics Data System (ADS)

Ergunova, O. T.; Lizunkov, V. G.; Malushko, E. Yu; Marchuk, V. I.; Ignatenko, A. Yu

2017-02-01

The article considers the processes of forming the strategic system of innovative activity management at the enterprises of a high-tech mechanical engineering complex (MEC) that are traditionally decisive in shaping the economic base of Russia. The authors proposed a method of designing a strategic system of innovative activity management at the MEC’s enterprises of the region which is based on the consideration of means and opportunities of the enterprise to implement intellectual activity. The proposed methodology and the empirical results constituted a ground for developing a system of strategic innovation management when performing the state-guaranteed order at the hi-tech MEC enterprises. Its implementation will help to reduce the level of uncertainty throughout the entire life cycle of an innovative activity product.

2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014)

NASA Astrophysics Data System (ADS)

2014-04-01

2014 International Conference on Science & Engineering in Mathematics, Chemistry and Physics (ScieTech 2014), was held at the Media Hotel, Jakarta, Indonesia, on 13-14 January 2014. The ScieTech 2014 conference is aimed to bring together researchers, engineers and scientists in the domain of interest from around the world. ScieTech 2014 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within Mathematics, Chemistry and Physics. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting Conference Program as well as the invited and plenary speakers. This year, we received 187 papers and after rigorous review, 50 papers were accepted. The participants come from 16 countries. There are 5 (Five) Paralell Sessions and Four Keynote Speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, the members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2014. The Editors of the Scietech 2014 Proceedings: Dr. Ford Lumban Gaol Dr. Benfano Soewito Dr. P.N. Gajjar
Annual Review of Research Under the Joint Services Electronics Program.

DTIC Science & Technology

1978-10-01

Electronic Science at Texas Tech University. Specific topics covered include fault analysis, Stochastic control and estimation, nonlinear control, multidimensional system theory , Optical noise, and pattern recognition.
Occupational Field 66 (Avionics) Less MOS’s 6682, 6683 and 6689 Task Analysis.

DTIC Science & Technology

1979-04-01

EQUIPMENT ( SACE ) TECH 011 ACFT CRYPTOGRAPHIC SYS TECI-, IMA 018 ACFT INERTIAL NAVIGATION SYSTEM (INS) SACE TECH 019 ACFT SEARCH/TRACK (SIT) SACE TECH...020 SACE SYS TECH 021 ACFT DECEPTIVE ELECTRONIC COUNTERMEASURES IDECM) TECH 022 ELECTRONIC COUNTERMEASURES (ECM) MODULE REPAIR TECH 023 ACFT ECM TECH
Integrative laser medicine and high-tech acupuncture at the medical university of graz, austria, europe.

PubMed

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue "High-Tech Acupuncture and Integrative Laser Medicine" of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine.
Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

PubMed Central

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine. PMID:22570669
Using online modules is a multi-modality teaching system: a high-touch high-tech approach to geriatric education.

PubMed

Gainor, Sara Jane; Goins, R Turner; Miller, Lee Ann

2004-01-01

Making geriatric education available to rural faculty/preceptors, students, and practitioners presents many challenges. Often the only options considered for educating those in the health professions about geriatrics are either traditional face-to-face courses or distance education programs. The purpose of this paper was to examine the use of Web-based modules or courses and other distance learning technology in concert with traditional learning modalities. The Mountain State Geriatric Education Center explored the use of a multi-modal approach within a high-touch, high-tech framework. Our findings indicate the following: it is important to start where participants are ready to begin; flexibility and variety are needed; soliciting evaluative feedback from participants is valuable; there is a need to integrate distance learning with more traditional modalities; and a high-tech, high-touch approach provides a format which participants find acceptable, accessible, and attractive. This assertion does not rule out the use of technology for distance education but rather encourages educators to take advantage of a wide range of modalities, traditional and technological, to reach rural practitioners, faculty, and students.
Efficacy of It's Your Game-Tech: A Computer-Based Sexual Health Education Program for Middle School Youth.

PubMed

Peskin, Melissa F; Shegog, Ross; Markham, Christine M; Thiel, Melanie; Baumler, Elizabeth R; Addy, Robert C; Gabay, Efrat K; Emery, Susan Tortolero

2015-05-01

Few computer-based HIV, sexually transmitted infection (STI), and pregnancy prevention programs are available, and even fewer target early adolescents. In this study, we tested the efficacy of It's Your Game (IYG)-Tech, a completely computer-based, middle school sexual health education program. The primary hypothesis was that students who received IYG-Tech would significantly delay sexual initiation by ninth grade. We evaluated IYG-Tech using a randomized, two-arm nested design among 19 schools in a large, urban school district in southeast Texas (20 schools were originally randomized). The target population was English-speaking eighth-grade students who were followed into the ninth grade. The final analytic sample included 1,374 students. Multilevel logistic regression models were used to test for differences in sexual initiation between intervention and control students, while adjusting for age, gender, ethnicity, time between measures, and family structure. There was no significant difference in the delay of sexual activity or in any other sexual behavior between intervention and control students. However, there were significant positive between-group differences for psychosocial variables related to STI and condom knowledge, attitudes about abstinence, condom use self-efficacy, and perceived norms about sex. Post hoc analyses conducted among intervention students revealed some significant associations: "full exposure" (completion of all 13 lessons) and "mid-exposure" (5-8 lessons) students were less likely than "low exposure" (1-4 lessons) students to initiate sex. Collectively, our findings indicate that IYG-Tech impacts some determinants of sexual behavior, and that additional efficacy evaluation with full intervention exposure may be warranted. Copyright © 2015 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.
Use of tobacco tax stamps to prevent and reduce illicit tobacco trade--United States, 2014.

PubMed

Chriqui, Jamie; DeLong, Hillary; Gourdet, Camille; Chaloupka, Frank; Edwards, Sarah Matthes; Xu, Xin; Promoff, Gabbi

2015-05-29

Tobacco use is the leading cause of preventable disease and death in the United States. Increasing the unit price on tobacco products is the most effective tobacco prevention and control measure. Illicit tobacco trade (illicit trade) undermines high tobacco prices by providing tobacco users with cheaper-priced alternatives. In the United States, illicit trade primarily occurs when cigarettes are bought from states, jurisdictions, and federal reservation land with lower or no excise taxes, and sold in jurisdictions with higher taxes. Applying tax stamps to tobacco products, which provides documentation that taxes have been paid, is an important tool to combat illicit trade. Comprehensive tax stamping policy, which includes using digital, encrypted ("high-tech") stamps, applying stamps to all tobacco products, and working with tribes on stamping agreements, can further prevent and reduce illicit trade. This report describes state laws governing tax stamps on cigarettes, little cigars (cigarette-sized cigars), roll-your-own tobacco (RYOT), and tribal tobacco sales across the United States as of January 1, 2014, and assesses the extent of comprehensive tobacco tax stamping in the United States. Forty-four states (including the District of Columbia [DC]) applied traditional paper ("low-tech") tax stamps to cigarettes, whereas four authorized more effective high-tech stamps. Six states explicitly required stamps on other tobacco products (i.e., tobacco products other than cigarettes), and in approximately one third of states with tribal lands, tribes required tax stamping to address illicit purchases by nonmembers. No U.S. state had a comprehensive approach to tobacco tax stamping. Enhancing tobacco tax stamping across the country might further prevent and reduce illicit trade in the United States.
Mining for Data

NASA Technical Reports Server (NTRS)

1998-01-01

AbTech Corporation used an F-18 HARV (High Alpha Research Vehicle) simulation developed by NASA to create an interactive computer-based prototype of the MQ (Model Quest) SV (System Validator) tool. Dryden Flight Research Center provided support to develop, test, and rapidly reprogram the validation function. AbTech's ModelQuest Enterprises highly automated and outperforms other modeling techniques to quickly discover meaningful relationships, patterns, and trends in databases. Applications include technical and business professionals in finance, marketing, business, banking, retail, healthcare, and aerospace.
DOE Office of Scientific and Technical Information (OSTI.GOV)

Piilonen, Leo; Takeuchi, Tatsu; Minic, Djordje

This is the final report of DOE Grant DE-FG05-92ER40709 awarded to the Virginia Tech high energy physics group. It covers the period February 1, 2010 through April 30, 2013. The high energy physics program at Virginia Tech supported by this grant is organized into three tasks: A for theory (Profs. Tatsu Takeuchi and Djordje Minic), B for heavy flavor physics with the Belle and Belle II experiments (Prof. Leo Piilonen), and N for neutrino physics (Profs. Jonathan Link and Piilonen).
State of the art and recommendations. Kangaroo mother care: application in a high-tech environment.

PubMed

Nyqvist, K H; Anderson, G C; Bergman, N; Cattaneo, A; Charpak, N; Davanzo, R; Ewald, U; Ludington-Hoe, S; Mendoza, S; Pallás-Allonso, C; Peláez, J G; Sizun, J; Wiström, A M

2010-11-01

Since Kangaroo Mother Care (KMC) was developed in Colombia in the 1970s, two trends in clinical application emerged. In low-income settings, the original KMC modelis implemented. This consists of continuous (24 h/day; 7 days/week) and prolonged mother/parent-infant skin-to-skin contact; early discharge with the infant in the kangaroo position; (ideally) exclusive breastfeeding and, adequate follow up. In affluent settings, intermittent KMC with sessions of one or a few hours skin-to-skin contact for a limited period is common. As a result of the increasing evidence of the benefits of KMC for both infants and families in all intensive care settings, KMC in a high-tech environment was chosen as the topic for the first European Conference on KMC, and the clinical implementation of the KMC modelin all types of settings was discussed at the 7th International Workshop on KMC Kangaroo Mother Care protocols in high-tech Neonatal Intensive Care Units (NICU) should specify criteria for initiation, kangaroo position, transfer to/from KMC, transport in kangaroo position, kangaroo nutrition, parents'role, modification of the NICU environment, performance of care in KMC, and KMCin case of infant instability. Implementation of the original KMC method, with continuous skin-to-skin contact whenever possible, is recommended for application in high-tech environments, although scientific evaluation should continue.
State of the art and recommendations. Kangaroo mother care: application in a high-tech environment.

PubMed

Nyqvist, K H; Anderson, G C; Bergman, N; Cattaneo, A; Charpak, N; Davanzo, R; Ewald, U; Ludington-Hoe, S; Mendoza, S; Pallás-Allonso, C; Peláez, J G; Sizun, J; Widström, A-M

2010-06-01

Since Kangaroo Mother Care (KMC) was developed in Colombia in the 1970s, two trends in clinical application emerged. In low income settings, the original KMC model is implemented. This consists of continuous (24 h/day, 7 days/week) and prolonged mother/parent-infant skin-to-skin contact; early discharge with the infant in the kangaroo position; (ideally) exclusive breastfeeding; and, adequate follow-up. In affluent settings, intermittent KMC with sessions of one or a few hours skin-to-skin contact for a limited period is common. As a result of the increasing evidence of the benefits of KMC for both infants and families in all intensive care settings, KMC in a high-tech environment was chosen as the topic for the first European Conference on KMC, and the clinical implementation of the KMC model in all types of settings was discussed at the 7th International Workshop on KMC. Kangaroo Mother Care protocols in high-tech Neonatal Intensive Care Units (NICU) should specify criteria for initiation, kangaroo position, transfer to/from KMC, transport in kangaroo position, kangaroo nutrition, parents' role, modification of the NICU environment, performance of care in KMC, and KMC in case of infant instability. Implementation of the original KMC method, with continuous skin-to-skin contact whenever possible, is recommended for application in high-tech environments, although scientific evaluation should continue.
Delivery of high-tech home care by hospital-based nursing units in Quebec: clinical and technical challenges.

PubMed

Lehoux, Pascale; Richard, L; Pineault, R; Saint-Arnaud, J

2006-03-01

The role that hospital-based nurses should play in the delivery of high-tech home care, and how they should be supported in that role, are topics that remain understudied. Our research objective was to document how hospital-based nursing teams perceive and deal with the clinical and technical challenges associated with the provision of high-tech home care. Four home care interventions were selected: antibiotic intravenous therapy, parenteral nutrition, peritoneal dialysis and oxygen therapy. A self-administered survey was sent to all hospital-based units providing these interventions in the province of Quebec, Canada (n = 154; response rate: 70.8%). We used descriptive statistical analyses to derive mean values for scores on either a five- or a six-level Likert scale. Despite variation across the four interventions, our results indicate that while nursing teams believe these interventions increase patients' autonomy, they also recognize that they generate anxiety and impose constraints on patients' lives. Nurses must increase efforts to deal with both clinical and technical challenges and help patients overcome the barriers to appropriate use of home care technologies. While nursing teams generally perceive high-tech home care as beneficial, they still experience significant technical and clinical challenges. Some of these challenges could be addressed by strengthening professional training initiatives, while others require broader home care policy interventions.
Work culture among healthcare personnel in a palliative medicine unit.

PubMed

André, Beate; Sjøvold, Endre; Rannestad, Toril; Holmemo, Marte; Ringdal, Gerd I

2013-04-01

Understanding and assessing health care personnel's work culture in palliative care is important, as a conflict between "high tech" and "high touch" is present. Implementing necessary changes in behavior and procedures may imply a profound challenge, because of this conflict. The aim of this study was to explore the work culture at a palliative medicine unit (PMU). Healthcare personnel (N = 26) at a PMU in Norway comprising physicians, nurses, physiotherapists, and others filled in a questionnaire about their perception of the work culture at the unit. The Systematizing Person-Group Relations (SPGR) method was used for gathering data and for the analyses. This method applies six different dimensions representing different aspects of a work culture (Synergy, Withdrawal, Opposition, Dependence, Control, and Nurture) and each dimension has two vectors applied. The method seeks to explore which aspects dominate the particular work culture, identifying challenges, limitations, and opportunities. The findings were compared with a reference group of 347 ratings of well-functioning Norwegian organizations, named the "Norwegian Norm." The healthcare personnel working at the PMU had significantly higher scores than the "Norwegian Norm" in both vectors in the "Withdrawal" dimension and significant lower scores in both vectors in the "Synergy," "Control," and "Dependence" dimensions. Healthcare personnel at the PMU have a significantly different perception of their work culture than do staff in "well-functioning organizations" in several dimensions. The low score in the "Synergy" and "Control" dimensions indicate lack of engagement and constructive goal orientation behavior, and not being in a position to change their behavior. The conflict between "high tech" and "high touch" at a PMU seems to be an obstacle when implementing new procedures and alternative courses of action.
High Fidelity Simulations of Large-Scale Wireless Networks (Plus-Up)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onunkwo, Uzoma

Sandia has built a strong reputation in scalable network simulation and emulation for cyber security studies to protect our nation’s critical information infrastructures. Georgia Tech has preeminent reputation in academia for excellence in scalable discrete event simulations, with strong emphasis on simulating cyber networks. Many of the experts in this field, such as Dr. Richard Fujimoto, Dr. George Riley, and Dr. Chris Carothers, have strong affiliations with Georgia Tech. The collaborative relationship that we intend to immediately pursue is in high fidelity simulations of practical large-scale wireless networks using ns-3 simulator via Dr. George Riley. This project will have mutualmore » benefits in bolstering both institutions’ expertise and reputation in the field of scalable simulation for cyber-security studies. This project promises to address high fidelity simulations of large-scale wireless networks. This proposed collaboration is directly in line with Georgia Tech’s goals for developing and expanding the Communications Systems Center, the Georgia Tech Broadband Institute, and Georgia Tech Information Security Center along with its yearly Emerging Cyber Threats Report. At Sandia, this work benefits the defense systems and assessment area with promise for large-scale assessment of cyber security needs and vulnerabilities of our nation’s critical cyber infrastructures exposed to wireless communications.« less
Nanoarchitectonics of molecular aggregates: science and technology.

PubMed

Ramanathan, Muruganathan; Hong, Kunlun; Ji, Qingmin; Yonamine, Yusuke; Hill, Jonathan P; Ariga, Katsuhiko

2014-01-01

The field of making, studying and using molecular aggregates, in which the individual molecules (monomers) are arranged in a regular fashion, has come a long way. Taking control over the aggregation of small molecules and polymers in bulk, on surfaces and at interfaces pose a considerable challenge for their utilization in modern high tech applications. In this review, we provide a detailed insight into recent trends in molecular aggregates from the perspectives of nanoarchitectonics.
Toward Active Control of Noise from Hot Supersonic Jets

DTIC Science & Technology

2012-07-24

1.5 heated jet simulated by way of LES. spreading angles of the jet which were determined from prelimi- nary LES computations performed by CRAFT Tech...system allowed time-resolved and high dynamic range measurements to be ob- tained for a heated , supersonic jet. Each component of the system is...independently operated, temporal spacing between frames is variable and can be set in an asynchronous fashion. Such flexibility even allows eight
Nanoarchitectonics of Molecular Aggregates: Science and Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramanathan, Nathan Muruganathan; Hong, Kunlun; Ji, Dr. Qingmin

2014-01-01

The field of making, studying and using molecular aggregates, in which the individual molecules (monomers) are arranged in a regular fashion, has come a long way. Taking control over the aggregation of small molecules and polymers in bulk, on surfaces and at interfaces pose a considerable challenge for their utilization in modern high tech applications. In this review we provide a detailed insight into recent trends in molecular aggregates from the perspectives of nanoarchitectonics.
Mathematics and Science Teachers Professional Development with Local Businesses to Introduce Middle and High School Students to Opportunities in STEM Careers

ERIC Educational Resources Information Center

Miles, Rhea; Slagter van Tryon, Patricia J.; Mensah, Felicia Moore

2015-01-01

TechMath is a professional development program that forms collaborations among businesses, colleges, and schools for the purpose of promoting Science, Technology, Engineering, and Mathematics (STEM) careers. TechMath has provided strategies for creating highquality professional development by bringing together teachers, students, and business…
ACE TECH: The Fourth Year of CTE and Academic Integration

ERIC Educational Resources Information Center

Knight, Eileen Quinn; Donahue, John; Knight, Patrick

2008-01-01

It only takes an hour or two of roaming the halls of Architecture, Construction and Engineering (ACE) Tech Charter High School to detect an enduring attitude of accomplishment from both the teachers and the students. This atmosphere is intentional. The school, located in Chicago, was created specifically to hone the skills of individuals choosing…

Preparing Michigan Students for the Jobs of Tomorrow: The Report of the Tech Prep Task Force.

ERIC Educational Resources Information Center

Michigan State Board of Education, Lansing.

Both secondary schools and community colleges are under pressure to increase the technical content of their curricula to produce graduates who can fill highly skilled technician jobs in a changing work force. Technical Preparation (Tech Prep) Programs are partnerships between these two institutional levels that incorporate career counseling and…
Online Classes See Cheating Go High-Tech

ERIC Educational Resources Information Center

Young, Jeffrey R.

2012-01-01

Easy A's may be even easier to score these days, with the growing popularity of online courses. Tech-savvy students are finding ways to cheat that let them ace online courses with minimal effort, in ways that are difficult to detect. The issue of online cheating may rise in prominence, as more and more institutions embrace online courses, and as…
The Boeing Company's Tech Prep Story: A Community College Bridge to the School-to-Work Strategy.

ERIC Educational Resources Information Center

Gayton, Carver; Parnell, Dale

1996-01-01

Reviews the Boeing Tech Prep Program, an associate degree program combining high school and community college vocational and academic curricula. Describes the three phases of the program's development: the provision of seed grants to schools, the development of an associate degree program, and the institution of an internship program. (MAB)
From High School to Work: 150 Great Tech Prep Careers.

ERIC Educational Resources Information Center

1998

This book presents information on 150 careers in a wide variety of fields that fall under the broad category of tech prep. Each four- to five-page profile contains the following: definition of the occupation, the nature of the work, requirements for educational and work experiences needed to enter and advance, opportunities for experience and…
Project COM-TECH (Bilingual Computer- and Technology-Oriented Program), 1985-86. OEA Evaluation Report.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn. Office of Educational Assessment.

In 1985-86, Project COM-TECH offered bilingual individualized instruction to 300 limited-English proficiency students at two New York City high schools (Bushwick in Brooklyn, and Brandeis in Manhattan). Using an enrichment approach, the project provided supplementary instruction in English as a second language (ESL), native language arts, and…
Computer Problems Can Infuriate Even the Most Tech Savvy

ERIC Educational Resources Information Center

Goldsborough, Reid

2004-01-01

Which high-tech products give you the most grief? Surprisingly, more people singled out TiVo and replay digital recording systems than personal computers, according to a recent survey by Best Buy. Nine percent of people said they found these TV devices difficult to use. The same percentage found PDAs (personal digital assistants) difficult. Only 2…
Maintaining High-Tech Programs on a Low-Tech Budget

ERIC Educational Resources Information Center

Donham, Brent

2003-01-01

Technology is and will continue to be a driving force in the United States economy. The U.S. Department of Labor (2003) projects computer and data processing services to be the fastest growing segment of the economy between the years 2000-2010. A study by the National Association of Manufacturers (2001) indicates that more than 80 percent of…
High-Tech or Low-Tech? Comparing Self-Monitoring Systems to Increase Task Independence for Students with Autism

ERIC Educational Resources Information Center

Bouck, Emily C.; Savage, Melissa; Meyer, Nancy K.; Taber-Doughty, Teresa; Hunley, Megan

2014-01-01

Independence is the ultimate goal for students with disabilities, including secondary students with autism. One avenue targeted for increasing independence and decreasing prompt-dependency is through self-monitoring. In this study, investigators sought to determine whether a difference exists in levels of task independence when three students with…
Large area and structured epitaxial graphene produced by confinement controlled sublimation of silicon carbide

PubMed Central

de Heer, Walt A.; Berger, Claire; Ruan, Ming; Sprinkle, Mike; Li, Xuebin; Hu, Yike; Zhang, Baiqian; Hankinson, John; Conrad, Edward

2011-01-01

After the pioneering investigations into graphene-based electronics at Georgia Tech, great strides have been made developing epitaxial graphene on silicon carbide (EG) as a new electronic material. EG has not only demonstrated its potential for large scale applications, it also has become an important material for fundamental two-dimensional electron gas physics. It was long known that graphene mono and multilayers grow on SiC crystals at high temperatures in ultrahigh vacuum. At these temperatures, silicon sublimes from the surface and the carbon rich surface layer transforms to graphene. However the quality of the graphene produced in ultrahigh vacuum is poor due to the high sublimation rates at relatively low temperatures. The Georgia Tech team developed growth methods involving encapsulating the SiC crystals in graphite enclosures, thereby sequestering the evaporated silicon and bringing growth process closer to equilibrium. In this confinement controlled sublimation (CCS) process, very high-quality graphene is grown on both polar faces of the SiC crystals. Since 2003, over 50 publications used CCS grown graphene, where it is known as the “furnace grown” graphene. Graphene multilayers grown on the carbon-terminated face of SiC, using the CCS method, were shown to consist of decoupled high mobility graphene layers. The CCS method is now applied on structured silicon carbide surfaces to produce high mobility nano-patterned graphene structures thereby demonstrating that EG is a viable contender for next-generation electronics. Here we present for the first time the CCS method that outperforms other epitaxial graphene production methods. PMID:21960446
Forecasting Ecological Genomics: High-Tech Animal Instrumentation Meets High-Throughput Sequencing

PubMed Central

Shafer, Aaron B. A.; Northrup, Joseph M.; Wikelski, Martin; Wittemyer, George; Wolf, Jochen B. W.

2016-01-01

Recent advancements in animal tracking technology and high-throughput sequencing are rapidly changing the questions and scope of research in the biological sciences. The integration of genomic data with high-tech animal instrumentation comes as a natural progression of traditional work in ecological genetics, and we provide a framework for linking the separate data streams from these technologies. Such a merger will elucidate the genetic basis of adaptive behaviors like migration and hibernation and advance our understanding of fundamental ecological and evolutionary processes such as pathogen transmission, population responses to environmental change, and communication in natural populations. PMID:26745372
A Novel Consensus-Based Particle Swarm Optimization-Assisted Trust-Tech Methodology for Large-Scale Global Optimization.

PubMed

Zhang, Yong-Feng; Chiang, Hsiao-Dong

2017-09-01

A novel three-stage methodology, termed the "consensus-based particle swarm optimization (PSO)-assisted Trust-Tech methodology," to find global optimal solutions for nonlinear optimization problems is presented. It is composed of Trust-Tech methods, consensus-based PSO, and local optimization methods that are integrated to compute a set of high-quality local optimal solutions that can contain the global optimal solution. The proposed methodology compares very favorably with several recently developed PSO algorithms based on a set of small-dimension benchmark optimization problems and 20 large-dimension test functions from the CEC 2010 competition. The analytical basis for the proposed methodology is also provided. Experimental results demonstrate that the proposed methodology can rapidly obtain high-quality optimal solutions that can contain the global optimal solution. The scalability of the proposed methodology is promising.
The Georgia Tech High Sensitivity Microwave Measurement System

NASA Technical Reports Server (NTRS)

Deboer, David R.; Steffes, Paul G.

1996-01-01

As observations and models of the planets become increasingly more accurate and sophisticated, the need for highly accurate laboratory measurements of the microwave properties of the component gases present in their atmospheres become ever more critical. This paper describes the system that has been developed at Georgia Tech to make these measurements at wavelengths ranging from 13.3 cm to 1.38 cm with a sensitivity of 0.05 dB/km at the longest wavelength and 0.6 db/km at the shortest wavelength.
Make sure your imaging equipment goes the distance.

PubMed

Halverson, K A

1997-11-01

Today's hospitals have invested a substantial portion of their capital budgets on the purchase of high-tech equipment--diagnostic imaging machinery, clinical laboratory apparatus, biomedical devices--and yet only half have developed strategies for taking care of that equipment as it ages. When do you replace it? When is it obsolete? How do you determine whether it is cost effective? Kenneth Halverson examines the steps to take to develop and implement a successful asset management program that will enable you to keep your high-tech equipment going.
75 FR 1020 - Amendments to the Export Administration Regulations (EAR) Based Upon the Accession of Albania and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-08

...--Commerce Country Chart [Reason for control] Countries Chemical & biological Nuclear National Security Missile Regional Stability Firearms Crime control Anti-terrorism weapons nonproliferation Tech convention...
Tech Prep Early Childhood Professions Advanced Specialty Curriculum Guide for Postsecondary Colleges. Part of an Articulated Program for Secondary & Postsecondary Students.

ERIC Educational Resources Information Center

Harriman, Marilyn Williams

The Tech Prep Early Childhood Professions Program is designed to provide high school and community college students in Texas with the necessary training and skills to find employment in the child care and education professions as teachers, directors, or special needs paraprofessionals. This Advanced Speciality Curriculum Guide is designed for…
The PRO-TECH Program. A Program for Gifted and Talented High School Students in Connecticut's Vocational-Technical School System.

ERIC Educational Resources Information Center

Brann, Ronald E.

This document describes Connecticut's PRO-TECH Program, which is designed to link pupils in vocational-technical schools, resources of school and community, and opportunity for growth in order to teach advanced skills, explore new interests, challenge old ideas, and highlight individual talents. The document consists of sections on the following…
The Classroom Notetaker: How To Organize a Program Serving Students with Hearing Impairments.

ERIC Educational Resources Information Center

Wilson, Jimmie Joan

This guide describes how to establish a notetaking program to benefit students with hearing impairments in mainstream settings. Chapter 1 discusses the need for notetakers and includes subjects such as providing equal access, high-tech and low-tech notetaking, how the notes can be used, and who can use the notes. Chapter 2 provides information on…
Project Data-Tech. Final Evaluation Report, 1993-1994. OER Report.

ERIC Educational Resources Information Center

Roman, Elliott M.

Project Data-Tech was an Elementary and Secondary Education Act Title VII-funded project in its fifth and last year of operation at a high school in Brooklyn (New York). The program served a total of 131 Haitian- and Spanish-speaking students, most of whom were of limited English proficiency, 54 fewer than in the previous year. Participating…
Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…
Get College- and Career-Ready at a Vo-Tech High School

ERIC Educational Resources Information Center

Demarest, Kathy K.; Gehrt, Victoria C.

2015-01-01

While talk abounds in the buzzword-happy education arena of what it means to develop students who are college and career ready, the author paints a portrait of a vocational-technical school district in northern Delaware that is actually doing both with its students, and has been for some 40 years. The vo-tech experience is not for students who…

Relationship of Tech Prep and Dual Credit to College Readiness and Retention

ERIC Educational Resources Information Center

Kim, JoHyun

2014-01-01

This study examined the relationship of tech prep and dual credit to college readiness in reading, writing, and math and retention, measured as total college-level credit hours earned. A sample of 612 high school graduates who enrolled in a community college in two consortia, one in Florida (n = 339) and the other in Oregon…
Challenges to achievement of metal sustainability in our high-tech society

DOE Office of Scientific and Technical Information (OSTI.GOV)

Izatt, Reed M.; Izatt, Steven R.; Bruening, Ronald L.

Achievement of sustainability in metal life cycles from mining of virgin ore to consumer and industrial devices to end-of-life products requires greatly increased recycling and improved processing of metals. Electronic and other high-tech products containing precious, toxic, and specialty metals usually have short lifetimes and low recycling rates. Products containing these metals generally are incinerated, discarded as waste in landfills, or dismantled in informal recycling using crude and environmentally irresponsible procedures. Low metal recycling rates coupled with increasing demand for products containing them necessitate increased mining with attendant environmental, health, energy, water, and carbon-footprint consequences. In this tutorial review, challengesmore » to achieving metal sustainability in present high-tech society are presented; health, environmental, and economic incentives for various stakeholders to improve metal sustainability are discussed; a case for technical improvements in separations technology, especially employing molecular recognition, is given; and global consequences of continuing on the present path are examined.« less
New generation extracorporeal membrane oxygenation with MedTech Mag-Lev, a single-use, magnetically levitated, centrifugal blood pump: preclinical evaluation in calves.

PubMed

Fujiwara, Tatsuki; Nagaoka, Eiki; Watanabe, Taiju; Miyagi, Naoto; Kitao, Takashi; Sakota, Daisuke; Mamiya, Taichi; Shinshi, Tadahiko; Arai, Hirokuni; Takatani, Setsuo

2013-05-01

We have evaluated the feasibility of a newly developed single-use, magnetically levitated centrifugal blood pump, MedTech Mag-Lev, in a 3-week extracorporeal membrane oxygenation (ECMO) study in calves against a Medtronic Bio-Pump BPX-80. A heparin- and silicone-coated polypropylene membrane oxygenator MERA NHP Excelung NSH-R was employed as an oxygenator. Six healthy male Holstein calves with body weights of about 100 kg were divided into two groups, four in the MedTech group and two in the Bio-Pump group. Under general anesthesia, the blood pump and oxygenator were inserted extracorporeally between the main pulmonary artery and the descending aorta via a fifth left thoracotomy. Postoperatively, both the pump and oxygen flow rates were controlled at 3 L/min. Heparin was continuously infused to maintain the activated clotting time at 200-240 s. All the MedTech ECMO calves completed the study duration. However, the Bio-Pump ECMO calves were terminated on postoperative days 7 and 10 because of severe hemolysis and thrombus formation. At the start of the MedTech ECMO, the pressure drop across the oxygenator was about 25 mm Hg with the pump operated at 2800 rpm and delivering 3 L/min flow. The PO2 of the oxygenator outlet was higher than 400 mm Hg with the PCO2 below 45 mm Hg. Hemolysis and thrombus were not seen in the MedTech ECMO circuits (plasma-free hemoglobin [PFH] < 5 mg/dL), while severe hemolysis (PFH > 20 mg/dL) and large thrombus were observed in the Bio-Pump ECMO circuits. Plasma leakage from the oxygenator did not occur in any ECMO circuits. Three-week cardiopulmonary support was performed successfully with the MedTech ECMO without circuit exchanges. The MedTech Mag-Lev could help extend the durability of ECMO circuits by the improved biocompatible performances. © 2013, Copyright the Authors. Artificial Organs © 2013, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.
Proceedings of the Irvine Workshop on Alternatives for the Environment, Certification, and Control of the DOD Common High Order Language, Held at California University, Irvine on 20-22 June 1978.

DTIC Science & Technology

1978-01-01

of the poet Lord Byron, and Babbage ’s "programmer." For reasons of historical accuracy, the use of the working title "DODi" has been retained in the...Surface Weapons Center Al Irvine, SofTech, Inc. Rob Kling, UC - Irvine John C. Knight, NASA Langley Research Center Charles L. Lawson, Jet Propulsion
High-Fidelity Microwave Control of Single-Atom Spin Qubits in Silicon

DTIC Science & Technology

2014-07-08

reality. Every electronic device found in our homes, offices, cars, pockets contains a brain made up of silicon transistors. Naturally, the trillion-dollar...to 6 GHz) and digital IQ modulation. AlazarTech ATS9440 This digitiser samples signals and stores them in memory for analysis, and has a graphical...nanostructures. Spin resonance experiments on donors in enriched 28Si have raised the suspicion that the proximity to a Si/SiO2 interface deteriorates
Tech Prep Marketing Guide. The Complete Book of Strategies and Practical Experiences.

ERIC Educational Resources Information Center

Williamson, Patty

This guide explains the concept of marketing tech prep and provides marketing principles and strategies to promote tech prep programs. The guide covers the following topics: (1) why it is necessary to market tech prep; (2) what a comprehensive tech prep marketing plan should include; (3) targeting the benefits message; (4) marketing tech prep to…
A randomized trial using telehealth technology to link caregivers with dementia care experts for in-home caregiving support: FamTechCare protocol.

PubMed

Williams, Kristine; Blyler, Diane; Vidoni, Eric D; Shaw, Clarissa; Wurth, JoEllen; Seabold, Denise; Perkhounkova, Yelena; Van Sciver, Angela

2018-06-01

The number of persons with dementia (PWD) in the United States is expected to reach 16 million by 2050. Due to the behavioral and psychological symptoms of dementia, caregivers face challenging in-home care situations that lead to a range of negative health outcomes such as anxiety and depression for the caregivers and nursing home placement for PWD. Supporting Family Caregivers with Technology for Dementia Home Care (FamTechCare) is a multisite randomized controlled trial evaluating the effects of a telehealth intervention on caregiver well-being and PWD behavioral symptoms. The FamTechCare intervention provides individualized dementia-care strategies to in-home caregivers based on video recordings that the caregiver creates of challenging care situations. A team of dementia care experts review videos submitted by caregivers and provide interventions to improve care weekly for the experimental group. Caregivers in the control group receive feedback for improving care based on a weekly phone call with the interventionist and receive feedback on their videos at the end of the 3-month study. Using linear mixed modeling, we will compare experimental and control group outcomes (PWD behavioral symptoms and caregiver burden) after 1 and 3 months. An exploratory descriptive design will identify a typology of interventions for telehealth support for in-home dementia caregivers. Finally, the cost for FamTechCare will be determined and examined in relation to hypothesized effects on PWD behavioral symptoms, placement rates, and caregiver burden. This research will provide the foundation for future research for telehealth interventions with this population, especially for families in rural or remote locations. © 2018 Wiley Periodicals, Inc.
Why the Lack of Academic Literature on Export Controls?

NASA Technical Reports Server (NTRS)

Kremic, Tibor

2001-01-01

Export controls is currently a relevant and dynamic topic. Given the growth of global operations and the high-tech nature of many products, an increase in awareness and understanding of the impacts of export controls are necessary. A structured approach to export controls has been in existence since 1949. Despite over 50 years of history, surprisingly little academic research and literature exists on the topic. This paper explores the current export control environment and explores possible reasons for the limited academic interest. Five possible reasons are discussed: (1) dynamic nature of the topic; (2) difficulty in ensuring accurate data; (3) Complexity of the problem; (4) relatively small economic impact; and (5) sensitive information. A research approach is recommended that considers these potential obstacles.
The Influence and Outcomes of High School to College Transition Policy (Tech Prep) for Career and Technical Education Students in Massachusetts

ERIC Educational Resources Information Center

Shaw, Christine

2012-01-01

Over the past two decades, the role of career and technical education has shifted from one preparing students directly for employment, to one that offers vocational training as well as college preparatory academics. To support this effort, the federal government enacted the "Tech Prep Act" Title II under the larger "1990 Carl D.…
Benchmarks & Milestones. A Statistical Summary of Regional 2+2 Tech Prep Activities. Mt. Hood Regional Cooperative Consortium. 1992 Annual Report.

ERIC Educational Resources Information Center

Mount Hood Community Coll., Gresham, OR.

This document contains seven tables and graphs that show the extent of tech prep agreements and activities for 1992, the seventh year of the Mt. Hood Regional Cooperative Consortium. The report shows that a strong cooperative relationship has been established between and among the district high schools, the education service district, and the…
Comparison of a low-tech vs. a high-tech method to evaluate surface fire temperatures

Treesearch

Daniel Yaussy; Joanne Rebbeck; Louis Iverson; Todd Hutchinson; Robert Long

2003-01-01

Prescribed surface fires were conducted in late March-early April 2001, at the Raccoon Ecological Management Area (two ~20 ha areas), and the Tar Hollow (~40 ha) and Zaleski (~40 ha) State Forests in thinned and unthinned mixed-oak forests of southeastern Ohio. Fires are being investigated as a silvicultural tool to aid in regenerating oaks, by removing understory...
Show & Tell: A Video Column / Don't Just Gather Data--Use It

ERIC Educational Resources Information Center

Fisher, Doug; Frey, Nancy

2015-01-01

Schools are awash in data, and teachers are being asked to gather data in a myriad of high-tech and low-tech ways. But gathering is not analyzing, and without analysis there is little reason to gather the data in the first place. Teachers need data-collection systems that lend themselves to rapid analysis and action. This article presents several…
Planning for organization development in operations control centers.

DOT National Transportation Integrated Search

2012-06-01

The first step in a proposed program of organization development (OD) was to assess organizational processes within the : Technical Operations Services (TechOps) Operations Control Centers (OCCs). The aim of the OD program was to : improve effectiven...
Voltage-Controlled Oscillator

NASA Technical Reports Server (NTRS)

1995-01-01

Integrated Component Systems, Inc. incorporated information from a NASA Tech Briefs article into a voltage-controlled oscillator it designed for a customer. The company then applied the technology to its series of phase-locked loop synthesizers, which offer superior phase noise performance.
Research Center Renaming Will Honor Senator Domenici

NASA Astrophysics Data System (ADS)

2008-05-01

New Mexico Tech and the National Radio Astronomy Observatory (NRAO) will rename the observatory's research center on the New Mexico Tech campus to honor retiring U.S. Senator Pete V. Domenici in a ceremony on May 30. The building that serves as the scientific, technical, and administrative center for the Very Large Array (VLA) and Very Long Baseline Array (VLBA) radio telescopes will be named the "Pete V. Domenici Science Operations Center." The building previously was known simply as the "Array Operations Center." Sen. Pete V. Domenici Sen. Pete V. Domenici "The new name recognizes the strong and effective support for science that has been a hallmark of Senator Domenici's long career in public service," said Dr. Fred Lo, NRAO Director. New Mexico Tech President Daniel H. Lopez said Sen. Domenici has always been a supporter of science and research in Socorro and throughout the state. "He's been a statesman for New Mexico, the nation -- and without exaggeration -- for the world," Lopez said. "Anyone with that track record deserves this recognition." Van Romero, Tech vice president of research and economic development, has served as the university's main lobbyist in Washington, D.C., for more than a decade. He said Sen. Domenici has always been receptive to new ideas and willing to take risks. "Over the years, Sen. Domenici has always had time to listen to our needs and goals," Romero said. "He has served as a champion of New Mexico Tech's causes and we owe him a debt of gratitude for all his efforts over the decades." Originally dedicated in 1988, the center houses offices and laboratories that support VLA and VLBA operations. The center also supports work on the VLA modernization project and on the international Atacama Large Millimeter/submillimeter Array (ALMA) project. Work on ALMA at the Socorro center and at the ALMA Test Facility at the VLA site west of Socorro has focused on developing and testing equipment to be deployed at the ALMA site in Chile's Atacama Desert. The research facility, part of the National Science Foundation-funded NRAO, was located on the NM Tech campus through a joint Federal-State effort spearheaded by Domenici. "Senator Domenici has worked hard over the years to support research both at New Mexico Tech and at the NRAO, and our facility on the New Mexico Tech campus is a symbol of that support. It's highly appropriate to name it after him," said Dr. Ethan Schreier, President of Associated Universities Inc., which operates the NRAO for the National Science Foundation. Senator Domenici helped make New Mexico Tech's Magdalena Ridge Observatory (MRO) a reality and provided essential support for NRAO's VLA and VLBA. MRO is one of the world's most technologically-advanced optical observatories. The VLA is the most scientifically-productive ground-based telescope in the history of astronomy. "Both these facilities will advance the frontiers of 21st-Century astrophysics, and keep our state and its research community in the forefront of science worldwide," said Dr. Robert Dickman, NRAO's Director for New Mexico Operations. Domenici also was instrumental in bringing the International Law Enforcement Academy -- another New Mexico Tech division -- to Roswell. During the Reagan Administration, Domenici sponsored the legislation that allowed the university to use the "M" Mountain range for research and testing. Lopez said the U.S. Department of the Interior would not let the university conduct testing on the range. A high level bureaucrat told Laurence Lattman, then the president of Tech, that it "would take an act of Congress" for Tech to have unlimited access to the land. Domenici sponsored the legislation -- signed by Reagan -- that gave Tech access to the land. Over the years, Domenici's support has helped Tech launch the homeland security training program in Playas, the EarthScope research and other anti-terrorism training programs. "All these projects benefit New Mexico Tech," Lopez said. "But these programs also benefit the nation. Senator Domenici has always been careful to make sure that federal money went to programs that benefit the entire nation." The National Radio Astronomy Observatory is a facility of the National Science Foundation, operated under cooperative agreement by Associated Universities, Inc.
"Size Matters": Women in High Tech Start-Ups

NASA Astrophysics Data System (ADS)

Lackritz, Hilary

2001-03-01

For those who want constant excitement, change, and rapid opportunities to have an impact in the technical world, start-up companies offer wonderful challenges. This talk will focus realistically on rewards and risks in the start-up world. An outline of the differences between the high tech start-ups and the academic and consulting worlds from a personal viewpoint will be presented. Size usually does matter, and in this case, small size can equal independence, entrepreneurship, and other advantages that are hard to come by in Dilbert’s corporate world.
Pricing and inventory policies for Hi-tech products under replacement warranty

NASA Astrophysics Data System (ADS)

Tsao, Yu-Chung; Teng, Wei-Guang; Chen, Ruey-Shii; Chou, Wang-Ying

2014-06-01

Companies, especially in the Hi-tech (high-technology) industry (such as computer, communication and consumer electronic products), often provide a replacement warranty period for purchased items. In reality, simultaneously determining the price and inventory decisions under warranty policy is an important issue. The objective of this paper is to develop a joint pricing and inventory model for Hi-tech products under replacement warranty policy. In the first model, we consider a Hi-tech product feature in which the selling price is declining in a trend. We determine the optimal inventory level for each period and retail price for the first period while maximising the total profit. In the second model, we further determine the optimal retail price and inventory level for each period in the dynamic demand market. This study develops solution approaches to solve the problems described above. Numerical analysis discusses the influence of system parameters on the company's decisions and behaviours. The results of this study could serve as a reference for business managers or administrators.
Additive Transforms Paint into Insulation

NASA Technical Reports Server (NTRS)

2007-01-01

Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.
Laser Induced Damage in Optical Materials: 1983. Symposium on Optical Materials for High Power Lasers (15th). Held in Boulder, Colorado on 14-16 November 1983

DTIC Science & Technology

1985-11-01

Streas-Induced Birefrengence G. Birnbaum & E. Cory xviii TABLE III BOULDER DAMAGE SYMPOSIUM 1978 INTRODUCTORY REMARKS DOE Welcome--Present...short period of time. These hi-tech approaches are benefitting from greater use of in situ diagnostics and controlled atmospheres and are resulting...1) melting CaF powder in an atmosphere of CF~ and hydrogen, which fluorinates the oxide and2 hydroxide contaminants, and (2) multiple remelting. A
Traffic control device conspicuity, TechBrief

DOT National Transportation Integrated Search

2013-09-01

The conspicuity of a traffic control device (TCD) is defined as the probability that the device will be noticed. However, there is no agreed-upon measure of what constitutes being noticed. Various measures such as eye fixations, recall, and other ver...

Embankment quality and assessment of moisture control implementation : tech transfer summary.

DOT National Transportation Integrated Search

2016-02-01

The motivation for this project was based on work by : Iowa State University (ISU) researchers at a few recent : grading projects that demonstrated embankments were : being constructed outside moisture control limits, even : though the contractor QC ...
Getting Personal: Preventing Leadership Failure in a High Tech Air Force

DTIC Science & Technology

2010-02-01

be comforting for supervisors. Being ―tech savvy‖ can help a supervisor ―bridge‖ the generational gap, creating a more effective relationship ...Tim Groeling concurs: ―I don‘t think [the abundant texting] will lead to shallow relationships . I do think it will lead to a withering of...preferences and learning style is important in understanding how personal leadership style and skill impact decisions and relationships with others
Maximizing Employment Outcomes through the Use of "Lower-Tech" Assistive Technology & Rehabilitation Engineering.

PubMed

Grott, Ray

2015-01-01

For many people with disabilities, Assistive Technology tools and Rehabilitation Engineering principles are key to successful employment outcomes. At the same time, employers and service providers are often under the impression that accommodations and AT solutions require high-tech, complicated, and expensive technologies. This paper discusses how creative problem solving and a "keep it simple" mindset can result in very functional low-cost solutions.
Racial and mental illness stereotypes and discrimination: an identity-based analysis of the Virginia Tech and Columbine shootings.

PubMed

Chen, Charlene Y; Purdie-Vaughns, Valerie; Phelan, Jo C; Yu, Gary; Yang, Lawrence H

2015-04-01

The Virginia Tech and Columbine High shootings are 2 of the deadliest school massacres in the United States. The present study investigates in a nationally representative sample how White Americans' causal attributions of these shooting moderate their attitudes toward the shooter's race. White Americans shown a vignette based on the Virginia Tech shooting were more likely to espouse negative beliefs about Korean American men and distance themselves from this group the more they believed that the shooter's race caused the shooting. Among those who were shown a vignette based on the Columbine High shooting, believing that mental illness caused the shooting was associated with weaker negative beliefs about White American men. White Americans in a third condition who were given the Virginia Tech vignette and prompted to subtype the shooter according to his race were less likely to possess negative beliefs about Korean American men the more they believed that mental illness caused the shooting. There was no evidence for the ultimate attribution error. Theoretical accounts based on the stereotype and in-group-out-group bias literature are presented. The current findings have important implications for media depictions of minority group behavior and intergroup relations. (c) 2015 APA, all rights reserved).
Racial and Mental Illness Stereotypes and Discrimination: An Identity-Based Analysis of the Virginia Tech and Columbine Shootings

PubMed Central

Chen, Charlene Y.; Purdie-Vaughns, Valerie; Phelan, Jo C.; Yu, Gary; Yang, Lawrence H.

2015-01-01

The Virginia Tech and Columbine High shootings are 2 of the deadliest school massacres in the United States. The present study investigates in a nationally representative sample how White Americans’ causal attributions of these shooting moderate their attitudes toward the shooter’s race. White Americans shown a vignette based on the Virginia Tech shooting were more likely to espouse negative beliefs about Korean American men and distance themselves from this group the more they believed that the shooter’s race caused the shooting. Among those who were shown a vignette based on the Columbine High shooting, believing that mental illness caused the shooting was associated with weaker negative beliefs about White American men. White Americans in a third condition who were given the Virginia Tech vignette and prompted to subtype the shooter according to his race were less likely to possess negative beliefs about Korean American men the more they believed that mental illness caused the shooting. There was no evidence for the ultimate attribution error. Theoretical accounts based on the stereotype and in-group-out-group bias literature are presented. The current findings have important implications for media depictions of minority group behavior and intergroup relations. PMID:25198415
Development of textile-based high-tech products: the new challenge.

PubMed

da Rocha, Ana Maria M F

2004-01-01

The new generation of smart textiles is represented by fibers, yarns, fabrics and other resulting products that have special properties, regarding mechanical, chemical, electrical and thermal performances. These high-tech products, being able to respond to external stimuli through the integration of electronic components, phase change materials, shape memory materials or nano materials, enabled the development of different active and functional products. These products when combining the functions of medium, carrier and interface for micro-systems applications represent the ideal connecting channel between humans and the environment. This is a field of innovation that broadened the scope of the traditional textile and apparel products to high-tech textiles, designed to meet specific needs, involving different technologies and produced according to required properties, like personal protection, safety, leisure or health wear. The development of smart wear is a new challenge for the textile and clothing industry: it has to develop products based not only on design, fashion and comfort concepts but also in terms of functions. Moreover these products must be easy to care and durable.
Temporary traffic control handbook for local agencies : tech transfer summary.

DOT National Transportation Integrated Search

2016-03-01

The updated handbook provides local agencies with uniform standards for temporary traffic control. The handbook includes sample layouts that can be used on various projects. Having sample layouts will provide a cost savings to agencies because the de...
Effectiveness of urban stormwater control measures in a 100-acre test site

EPA Science Inventory

Kansas City, Missouri chose a test area (100 acres) and a control area (80 acres) to test the effectiveness of urban stormwater control (SCM) deployment in conjunction with the USEPA, University of Alabama, University of Missouri-Kansas City and TetraTech. Both the test and cont...
The Texas Tech Prep Consortia: Strategies for Advancing Academic and Technical Education.

ERIC Educational Resources Information Center

Hensley, Oliver D., Ed.; And Others

This book contains 30 chapters on the tech prep initiative in Texas: "The Identity of Tech Prep in Texas" (Tunstall); "A Snap-Shot of the Impact of the Tech Prep Initiative in the Governor's 24 Planning Regions" (Brown); "The Tech Prep Consortium Directors: The Architects for the Future of Texas" (Hensley et al.);…
Tech Prep Implementation in the United States: The Once and Future Role of Community Colleges.

ERIC Educational Resources Information Center

Bragg, Debra D.; Layton, James D.

1995-01-01

Describes a study examining the impact of the Tech Prep Education Act on the initial implementation of federally supported Tech Prep Initiatives. Based on telephone survey responses from all 50 state Tech Prep leaders, reviews findings concerning the funding of Tech Prep consortia, state and local administrative structures, policies and goals, and…
Tech-Prep in New York State: Profiles of Four Diverse Programs.

ERIC Educational Resources Information Center

Frenkel, Michael W.; Brodsky, Stanley M.

These case studies highlight the diversity of four tech programs that responded with a unique set of organizational policies and procedures to a unique set of challenges. The case study on City Tech Tech-Prep Consortium in Brooklyn focuses on three strategies: transition to City Tech program, postsecondary component, and program evaluation. The…
Summer Research Experiences for Science and Art Teachers to Explore Astrobiology

NASA Astrophysics Data System (ADS)

Cola, J.; Gaucher, E.; Snell, T.; Greenwood, J.; Angra, A.; Zimmerman, C.; Williams, L. D.

2012-12-01

The Georgia Tech Center for Ribosomal Origins and Evolution, a center funded by the NASA Astrobiology Institute, developed an educational program titled, "Life on the Edge: Astrobiology." The purpose of the program was to provide high school educators with the exposure, materials, and skills necessary to prepare our future workforce and to foster student interest in scientific discovery on Earth and throughout the universe. In an effort to promote and encourage entry into teaching careers, Georgia Tech paired teachers in the Georgia Intern-Fellowship for Teachers (GIFT) program with undergraduate students interested in becoming a teacher through the NSF Pre-Teaching REU program. The GIFT and Pre-Teaching fellows investigated extremophiles, which became the focus of a week-long, "Life on the Edge: Astrobiology " summer program developed by three high school educators, two undergraduate students and faculty in the Schools of Biology, and Chemistry and Biochemistry at Georgia Tech. Twenty high school students were introduced to hands-on activities, such as astrobiology inspired art and techniques such as genomic DNA purification, gel electrophoresis, and Polymerase Chain Reaction (PCR). The impact of the Astrobiology program on the GIFT researchers, Pre-Teaching REU students, high school students, and faculty are discussed.
Characterization of Reaerosolization From Impingers in an Effort to Improve Airborne Virus Sampling

DTIC Science & Technology

2009-04-01

Koutrakis, P. (1996) Inertial separation of ultrafine particles using a condensational growth/ virtual impaction system. Aerosol Sci. Tech. 25, 424–436...Environ. 42, 828–832. Demokritou, P., Gupta, T., and and Koutrakis, P. (2002) A high volume apparatus for the condensational growth of ultrafine ... particles for inhalation toxicological studies. Aerosol Sci. Tech. 36, 1061–1072. Floyd, R., and Sharp, D. G. (1978) Viral aggregation: Effects of salts
Technology Strategy in Irregular Warfare: High-Tech Versus Right-Tech

DTIC Science & Technology

2015-12-01

ny-countys-confiscated-gun-policy/. 88 newest AH-64E. It has upgraded engines and rotor blades that enable the attack helicopter to have a quicker...was the extent of their defensive operations. Aircraft, helicopter gunships, armored vehicles, and artillery were directly used by Soviet forces...it into raw numbers, the Soviet Air Force had approximately 6,894 fixed-wing aircraft, and 3,320 helicopters .126 The Soviet Army had five times
[Medical education in the digital era; opportunities for the Netherlands].

PubMed

Broeders, Ivo A M J

2015-01-01

The next generation of physicians enters a job market of high-tech medicine; detailed technical knowledge of this technology is therefore a prerequisite. However, teaching on technology does not currently form an integral part of the medicine degree curriculum. We should consider if a generic medicine degree is still a valid framework, or whether students should be offered to move into different specialties at an earlier stage. By applying the latter approach, we can produce a generation of physicians prepared for the challenges thrown at them in a constantly changing, high-tech, professional environment.
Vitamin D Status and Quality of Life in Healthy Male High-Tech Employees.

PubMed

Tepper, Sigal; Dabush, Yael; Shahar, Danit R; Endevelt, Ronit; Geva, Diklah; Ish-Shalom, Sofia

2016-06-15

While low vitamin D status has been shown to be associated with decreased quality of life in unhealthy populations and women, only limited data are available regarding healthy adult men. Our aim was to evaluate the associations between health-related quality of life (QoL) and vitamin D status in adult men. High-tech employees aged 25-65 year were recruited from an occupational periodic examination clinic at Rambam Health Campus. QoL was assessed using the Centers for Disease Control and Prevention (CDC) Health-related quality of life questionnaire (HRQOL-4). Serum 25-hydroxyvitamin D (25(OH)D) and Body Mass Index (BMI) were measured; further information was collected about physical activity, education, sun exposure, sick-days, and musculoskeletal pain severity (visual analog scale). Three hundred and fifty-eight men were enrolled in the study; mean serum 25(OH)D level was 22.1 ± 7.9 ng/mL (range 4.6-54.5 ng/mL). In a multivariate logistic regression model, 25(OH)D was a significant independent determinant of self-rated health; Odds Ratio (OR) for self-rated health was 0.91 (95% confidence interval (CI) 0.85-0.97, p = 0.004), adjusted for age, BMI, pain severity, physical activity, and sun exposure. Every 1 ng/mL increase of 25(OH)D was associated with 9% reduction in the odds of reporting self-rated health as fair or poor. Poisson regression model demonstrated an association between physically unhealthy days and 25(OH)D levels (rate ratio 0.95, p < 0.001). In conclusion, serum levels of 25(OH)D were associated with self-rated health and with physically unhealthy days of HRQOL in healthy high-tech male workers. Future intervention studies are required to test the impact of vitamin D supplementation on QoL.
Tech Prep Implementation and Preliminary Student Outcomes for Eight Local Tech Prep Consortia.

ERIC Educational Resources Information Center

Bragg, Debra D.; Dare, Donna E.; Reger, W. M., IV; Ovaice, Ghazala; Zamani, Eboni M.; Layton, James D.; Dornsife, Carolyn J.; Vallee, Manuel; Brown, Carrie H.; Orr, Margaret Terry

The implementation and student outcomes of Tech Prep were examined in a study of eight consortia that represented a range of Tech Prep models and approaches in urban, suburban, and rural locations across the United States. Data were collected from the following sources: field visits; follow-up survey of Tech Prep participants and nonparticipants;…
NASA Tech Briefs, March 2004

NASA Technical Reports Server (NTRS)

2004-01-01

Topics covered include: 1) Advanced Signal Conditioners for Data-Acquisition Systems; 2) Downlink Data Multiplexer; 3) Viewing ISS Data in Real Time via the Internet; 4) Autonomous Environment-Monitoring Networks; 5) Readout of DSN Monitor Data; 6) Parallel-Processing Equalizers for Multi-Gbps Communications; 7) AIN-Based Packaging for SiC High-Temperature Electronics; 8) Software for Optimizing Quality Assurance of Other Software; 9) The TechSat 21 Autonomous Sciencecraft Experiment; 10) Software for Analyzing Laminar-to-Turbulent Flow Transitions; 11) Elastomer Filled With Single-Wall Carbon Nanotubes; 12) Modifying Ship Air-Wake Vortices for Aircraft Operations; 13) Strain-Gauge Measurement of Weight of Fluid in a Tank; 14) Advanced Docking System With Magnetic Initial Capture; 15) Blade-Pitch Control for Quieting Tilt-Rotor Aircraft; 16) Solar Array Panels With Dust-Removal Capability; 17) Aligning Arrays of Lenses and Single-Mode Optical Fibers; 18) Automatic Control of Arc Process for Making Carbon Nanotubes; 19) Curved-Focal-Plane Arrays Using Deformed-Membrane Photodetectors; 20) Role of Meteorology in Flights of a Solar-Powered Airplane; 21) Model of Mixing Layer With Multicomponent Evaporating Drops; 22) Solution-Assisted Optical Contacting; 23) Improved Discrete Approximation of Laplacian of Gaussian; 24) Utilizing Expert Knowledge in Estimating Future STS Costs; 25) Study of Rapid-Regression Liquefying Hybrid Rocket Fuels; and 26) More About the Phase-Synchronized Enhancement Method.
Measuring the effectiveness of ramp metering strategies on I-12 : [tech summary].

DOT National Transportation Integrated Search

2013-10-01

In recent years, more emphasis has been placed on Active Traffi c Management (ATM) strategies such as speed harmonization, managed lanes, and : ramp metering. Ramp metering is one of the successful active traffi c control strategies, controlling the ...
America’s Air Force, The Future Calls: An Evidentiary and Theoretical Analysis Of The Roles And Missions Of A USAF Astronaut Corps

DTIC Science & Technology

2016-06-01

wT0S8qQLCOqh. ; Keith Wagstaff, “ Elon Musk Says SpaceX Will Send People to Mars By 2025,” NBC News, 29 January 2016, Accessed 22 February 2016...http://www.nbcnews.com/tech/tech-news/ elon - musk -says-spacex-will-send-people- mars-2025-n506891. 76. “About Mars One,” Mars-One.com, 2016, Accessed 22...January 2014. Accessed 22 February 2016. https://www.stratcom.mil/factsheets/11/Space_Control_and_Space_Surveillan ce/. Wagstaff, Keith. “ Elon Musk Says

Packaged, High-Power, Narrow-Linewidth Slab-Coupled Optical Waveguide External Cavity Laser (SCOWECL)

DTIC Science & Technology

2010-12-01

1946. [21 Y. Li and P. Herczfe1d, "Coherent PM Optical Link Employing ACP-PPLL," 1. Light\\\\"{l\\’e TechI /O!., vol. 27 . pp. 1086-1094, 2009. [31 C...Lightli"rn·e TechI /O!. , vol. 22, pp. 57- 62.2004. [4] G. A. finll, C. E. Holton, G. Hull-Allen, ::md W. W. l\\·lorey. ඄ mW 1.5 )1111 si ngle
Evaluation of non-destructive technologies for construction quality control of HMA and PCC pavements in Louisiana : [tech summary].

DOT National Transportation Integrated Search

2013-11-01

Current roadway quality control and quality acceptance (QC/QA) procedures for the Louisiana Department of Transportation and Development : (LADOTD) include coring for thickness, density, and air voids in hot mix asphalt (HMA) pavements and thickness ...
NASA Tech Briefs Index 1979. Volume 4, Nos. 1-4

NASA Technical Reports Server (NTRS)

1980-01-01

Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Index to NASA Tech Briefs contains abstracts and four indexes -- subject, personal author, originating Center, and Tech Brief number -- for 1979 Tech Briefs.
NASA Tech Briefs Index 1978. Volume 3, Nos. 1-4

NASA Technical Reports Server (NTRS)

1978-01-01

Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Index to NASA Tech Briefs contains abstracts and four indexes -- subject, personal author, originating Center, and Tech Brief number -- for 1978 Tech Briefs.
NASA Tech Briefs Index 1980. Volume 5, Nos. 1-4

NASA Technical Reports Server (NTRS)

1981-01-01

Tech Briefs are short announcements of new technology derived from the research and development activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This Index to NASA Tech Briefs contains abstracts and four indexes -- subject,. personal author, originating Center, and Tech Brief number -- for 1980 Tech Briefs.
Cumulative index to NASA Tech Briefs, 1970-1975. [bibliographies

NASA Technical Reports Server (NTRS)

1979-01-01

Tech briefs of technology derived from the research and development activities of the National Aeronautics and Space Administration are presented. Abstracts and indexes of subject, personal author, originating center, and tech brief number for the 1970-1975 tech briefs are presented.
Remodelling technology transfer

NASA Astrophysics Data System (ADS)

Dumont, Emmanuel L. P.

2015-02-01

Should inventors control the fate of their own inventions? In the US, most universities think not. But, as Emmanuel Dumont explains, the Jacobs Technion-Cornell Institute at Cornell Tech in New York City bets otherwise.
Access Denied

ERIC Educational Resources Information Center

Villano, Matt

2008-01-01

Building access control (BAC)--a catchall phrase to describe the systems that control access to facilities across campus--has traditionally been handled with remarkably low-tech solutions: (1) manual locks; (2) electronic locks; and (3) ID cards with magnetic strips. Recent improvements have included smart cards and keyless solutions that make use…
A smartphone-supported weight loss program: design of the ENGAGED randomized controlled trial.

PubMed

Pellegrini, Christine A; Duncan, Jennifer M; Moller, Arlen C; Buscemi, Joanna; Sularz, Alyson; DeMott, Andrew; Pictor, Alex; Pagoto, Sherry; Siddique, Juned; Spring, Bonnie

2012-11-30

Obesity remains a major public health challenge, demanding cost-effective and scalable weight management programs. Delivering key treatment components via mobile technology offers a potential way to reduce expensive in-person contact, thereby lowering the cost and burden of intensive weight loss programs. The ENGAGED study is a theory-guided, randomized controlled trial designed to examine the feasibility and efficacy of an abbreviated smartphone-supported weight loss program. Ninety-six obese adults (BMI 30-39.9 kg/m2) will be randomized to one of three treatment conditions: (1) standard behavioral weight loss (STND), (2) technology-supported behavioral weight loss (TECH); or (3) self-guided behavioral weight loss (SELF). All groups will aim to achieve a 7% weight loss goal by reducing calorie and fat intake and progressively increasing moderate intensity physical activity to 175 minutes/week. STND and TECH will attend 8 group sessions and receive regular coaching calls during the first 6 months of the intervention; SELF will receive the Group Lifestyle Balance Program DVD's and will not receive coaching calls. During months 1-6, TECH will use a specially designed smartphone application to monitor dietary intake, body weight, and objectively measured physical activity (obtained from a Blue-tooth enabled accelerometer). STND and SELF will self-monitor on paper diaries. Linear mixed modeling will be used to examine group differences on weight loss at months 3, 6, and 12. Self-monitoring adherence and diet and activity goal attainment will be tested as mediators. ENGAGED is an innovative weight loss intervention that integrates theory with emerging mobile technologies. We hypothesize that TECH, as compared to STND and SELF, will result in greater weight loss by virtue of improved behavioral adherence and goal achievement. NCT01051713.
Starting Up in a Down Market, with a Boost From Entrepreneurship Graduate Programs

NASA Astrophysics Data System (ADS)

Taylor, Cyrus

2003-03-01

In the late 1990's, it seemed that any two graduate students and their dog could start and grow a high-tech company. With the collapse of, first, the internet sector, and, more recently, the telecommunications sector, there has been a traumatic shake-out among high tech firms, and the challenges facing new firms appear to have greatly increased. This talk will highlight the keys for physics entrepreneurs to survive and even thrive in this environment, with a special initial boost from new graduate programs combining business school and physics training. The infrastructure needed by educational programs designed to empower physicists as entrepreneurs is discussed.
Determinants of the Price of High-Tech Metals: An Event Study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wanner, Markus, E-mail: markus.wanner@mrm.uni-augsburg.de; Gaugler, Tobias; Gleich, Benedikt

The growing demand for high-tech products has resulted in strong growth in demand for certain minor metals. In combination with production concentrated in China, this caused strong and unpredicted price movements in recent years. As a result, manufacturing companies have to cope with additional risks. However, the detailed reasons for the price development are only partially understood. Therefore, we analyzed empirically which determinants can be assigned to price movements and performed an event study on the high-tech metals neodymium, indium, and gallium. Based on our dataset of news items, we were able to find coinciding events to almost 90% ofmore » all price jumps (recall). We showed that if any information about these events occurred with a probability of over 50% there would also be a price jump within 10 days (precision). However, the classical set of price determinants has to be extended for these specific markets, as we found unorthodox factors like holidays or weather that may be indicators for price movements. Therefore, we hope that our study supports industry for instance in performing more informed short-term planning of metals purchasing based on information about specific events.« less
Broadening Awareness and Participation in the Geosciences Among Underrepresented Minorities in STEM

NASA Astrophysics Data System (ADS)

Blake, R.; Liou-Mark, J.

2012-12-01

An acute STEM crisis exists nationally, and the problem is even more dire among the geosciences. Since about the middle of the last century, fewer undergraduate and graduate degrees have been granted in the geosciences than in any other STEM fields. To help in ameliorating this geoscience plight, particularly from among members of racial and ethnic groups that are underrepresented in STEM fields, the New York City College of Technology (City Tech) launched a vibrant geoscience program and convened a community of STEM students who are interested in learning about the geosciences. This program creates and introduces geoscience knowledge and opportunities to a diverse undergraduate student population that was never before exposed to geoscience courses at City Tech. This geoscience project is funded by the NSF OEDG program, and it brings awareness, knowledge, and geoscience opportunities to City Tech's students in a variety of ways. Firstly, two new geoscience courses have been created and introduced. One course is on Environmental Remote Sensing, and the other course is an Introduction to the Physics of Natural Disasters. The Remote Sensing course highlights the physical and mathematical principles underlying remote sensing techniques. It covers the radiative transfer equation, atmospheric sounding techniques, interferometric and lidar systems, and an introduction to image processing. Guest lecturers are invited to present their expertise on various geoscience topics. These sessions are open to all City Tech students, not just to those students who enroll in the course. The Introduction to the Physics of Natural Disasters course is expected to be offered in Spring 2013. This highly relevant, fundamental course will be open to all students, especially to non-science majors. The course focuses on natural disasters, the processes that control them, and their devastating impacts to human life and structures. Students will be introduced to the nature, causes, risks, effects, and prediction of natural disasters including earthquakes, volcanoes, tsunamis, landslides, subsidence, global climate change, severe weather, coastal erosion, floods, mass extinctions, wildfires, and meteoroid impacts. In addition to the brand new geoscience course offerings, City Tech students participate in geoscience - seminars, guest lectures, lecture series, and geoscience internship and fellowship workshops. The students also participate in geoscience exposure trips to NASA/GISS Columbia University, NOAA-CREST, and the Brookhaven National Laboratory. Moreover, the undergrads are provided opportunities for paid research internships via two NSF grants - NSF REU and NSF STEP. Geoscience projects are also integrated into course work, and students make geoscience group project presentations in class. Students also participate in geoscience career and graduate school workshops. The program also creates geoscience articulation agreements with the City College of New York so that students at City Tech may pursue Bachelor's and advanced degrees in the geosciences. This program is supported by NSF OEDG grant #1108281.
Does Not Compute: The High Cost of Low Technology Skills in the U.S.--and What We Can Do about It. Vital Signs: Reports on the Condition of STEM Learning in the U.S.

ERIC Educational Resources Information Center

Change the Equation, 2015

2015-01-01

Although American millennials are the first generation of "digital natives"--that is, people who grew up with computers and the internet--they are not very tech savvy. Using technology for social networking, surfing the web, or taking selfies is a far cry from using it to solve complex problems at work or at home. Truly tech savvy people…
Why farming with high tech methods should integrate elements of organic agriculture.

PubMed

Ammann, Klaus

2009-09-01

In the previous article [Ammann, K. (2008) Feature: integrated farming: why organic farmers should use transgenic crops. New Biotechnol. 25, 101-107], in a plea for the introduction of transgenic crops into organic and integrated farming, it was announced that the complementary topic, namely that high tech farmers should integrate elements of organic agriculture, will be a follow up. Some selected arguments for such a view are summarised here. Basically, they comprise a differentiated view on agro-biodiversity outside the field of production; landscape management methods to enhance biodiversity levels. Both elements are compatible with basic ideas of organic farming. First, Precision Farming is given as one example of the many ways to support agricultural production through high technology, with the aim of reducing energy input, maintaining excellent soil conditions and enhancing yield. It is clear from this analysis that modern agriculture and certain elements of organic-integrated agriculture are compatible. There are sectors of high tech farming, such as the introduction of a better recycling scheme and also a better focus on socio-economic aspects, which need to be taken up seriously from organic-integrated farming, a system which puts a lot of emphasis on those elements and for which important research data are available. In the final part a new concept of dynamic sustainability is presented.
Illinois Tech Prep Planning Strategies.

ERIC Educational Resources Information Center

Illinois Univ., Urbana. Dept. of Vocational and Technical Education.

This tech prep planning handbook is based on the research conducted at the Office of Community College Research and Leadership, University of Illinois at Urbana-Champaign. The study involved information gathering procedures at each of the 17 tech prep pilot sites about their planning activities. Seven sections are included: (1) tech prep in…
Wide-Bandgap MOSFET Research with Virginia Tech Graduate Students |

Science.gov Websites

Advanced Manufacturing Research | NREL Wide Bandgap MOSFET Research with Virginia Tech Wide -Bandgap MOSFET Research with Virginia Tech Graduate Students Along with graduate student fellows from Virginia Tech, NREL is researching aspects related to the reliability and prognostics of power electronic
Changing radiology resident education to meet today's and tomorrow's needs.

PubMed

Halsted, Mark J; Perry, Laurie; Racadio, John M; Medina, L Santiago; LeMaster, Thomas

2004-09-01

Radiology education has evolved significantly in the past several decades, but there is considerable room for improvement. While some improvements depend on the availability of new technology, others are low tech, requiring merely that we be aware of and apply findings in the education literature. We teachers of radiology could benefit from recent studies investigating the processes underlying adult learning to improve the methods we use to train residents and fellows, and to improve the way we teach our colleagues and even ourselves. In this review, adult learning and the expert learner are briefly discussed, as are the important elements of effective learning tools. The strengths and weaknesses of radiology education as it is commonly practiced today are explored. Specific suggestions for improving education in radiology using both low tech and high tech methods are then discussed.
Using rainfall simulators to test wood shreddings for erosion control

Treesearch

James Gronier; Randy Foltz; Charlie Showers

2005-01-01

The U.S. Department of Agriculture Forest Service is considering alternative methods of erosion control when constructing roads, decommissioning roads, protecting lands burned by wildland fires, and reclaiming lands disturbed by other activities. This article is the second in a series of tech tips that discuss the use of wood shreddings for erosion control. The first...
Radio Frequency Identification Applications in Pavements

DOT National Transportation Integrated Search

2014-08-01

Radio frequency identification (RFID) technology is widely used for inventory control, tool and material tracking, and other similar applications where line-of-sight optical bar codes are inconvenient or impractical. Several applications of RFID tech...
TCAMS lessons learned

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harris, D.

1997-11-01

This report contains viewgraphs on the CINC mobile alternate headquarters and the tech control automation, maintenance and support facility. A discussion on software cost reduction by reuse is given as well as managing risk by assessment and mitigation.

Miniature Intermittent Contact Switch

NASA Technical Reports Server (NTRS)

Sword, Antony

1972-01-01

This tech brief concerns work to provide a shock-resistant switch capable of being actuated by forces of varying magnitude and direction, primarily for use as a sensor on remote control (tele-operator) and prosthetic devices.
The First ECPD Accredited Environmental B. Tech. Program

ERIC Educational Resources Information Center

Rowe, Donald R.; Russell, John P.

1975-01-01

Describes the first bachelor of science program in environmental engineering technology, with objectives of providing adequate training in the control of air, water, and land pollution. Includes a four-year curriculum plan. (MLH)
Planning a Tech Prep Program in Hospitality. Final Report.

ERIC Educational Resources Information Center

Chicago City Colleges, IL. Chicago City-Wide Coll.

A project conducted to establish tech prep articulation training agreements between City Colleges of Chicago and several public secondary schools is described in this report. Project activities were as follows: (1) developed a handbook to define the tech prep experience and guide committee members on how tech prep can be a valuable asset to…
Evaluating and Improving Tech Prep: Development, Validation, and Results of the Minnesota Self-Assessment Model.

ERIC Educational Resources Information Center

Pucel, David J.; And Others

1996-01-01

The Minnesota Tech Prep Self-Evaluation System is a framework based on ideas from Deming, Juran, and the Baldridge award. Testing with 17 Minnesota tech prep consortia found it effective in identifying areas needing improvement and promoting dialog among those involved in tech prep implementation. (SK)
Tech-Prep Competency Profiles within the Engineering Technologies Cluster.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 12 competency profiles for tech prep courses within the engineering technologies cluster. The document consists of the following sections: (1) systemic curriculum reform philosophy--Ohio's vision of tech prep and its six critical components; (2) an explanation of the process of developing the tech prep competencies; (3) a…
34 CFR 406.1 - What is the State-Administered Tech-Prep Education Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false What is the State-Administered Tech-Prep Education... (Continued) OFFICE OF VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION STATE-ADMINISTERED TECH-PREP EDUCATION PROGRAM General § 406.1 What is the State-Administered Tech-Prep Education Program? If the annual...
The demonstration of an advanced cyclone coal combustor, with internal sulfur, nitrogen, and ash control for the conversion of a 23 MMBTU/hour oil fired boiler to pulverized coal

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zauderer, B.; Fleming, E.S.

1991-08-30

This work contains to the final report of the demonstration of an advanced cyclone coal combustor. Titles include: Chronological Description of the Clean Coal Project Tests,'' Statistical Analysis of Operating Data for the Coal Tech Combustor,'' Photographic History of the Project,'' Results of Slag Analysis by PA DER Module 1 Procedure,'' Properties of the Coals Limestone Used in the Test Effort,'' Results of the Solid Waste Sampling Performed on the Coal Tech Combustor by an Independent Contractor During the February 1990 Tests.'' (VC)
Effect of process parameters on formability of laser melting deposited 12CrNi2 alloy steel

NASA Astrophysics Data System (ADS)

Peng, Qian; Dong, Shiyun; Kang, Xueliang; Yan, Shixing; Men, Ping

2018-03-01

As a new rapid prototyping technology, the laser melting deposition technology not only has the advantages of fast forming, high efficiency, but also free control in the design and production chain. Therefore, it has drawn extensive attention from community.With the continuous improvement of steel performance requirements, high performance low-carbon alloy steel is gradually integrated into high-tech fields such as aerospace, high-speed train and armored equipment.However, it is necessary to further explore and optimize the difficult process of laser melting deposited alloy steel parts to achieve the performance and shape control.This article took the orthogonal experiment on alloy steel powder by laser melting deposition ,and revealed the influence rule of the laser power, scanning speed, powder gas flow on the quality of the sample than the dilution rate, surface morphology and microstructure analysis were carried out.Finally, under the optimum technological parameters, the Excellent surface quality of the alloy steel forming part with high density, no pore and cracks was obtained.
Tool for evaluating research implementation challenges: A sense-making protocol for addressing implementation challenges in complex research settings

PubMed Central

2013-01-01

Background Many challenges arise in complex organizational interventions that threaten research integrity. This article describes a Tool for Evaluating Research Implementation Challenges (TECH), developed using a complexity science framework to assist research teams in assessing and managing these challenges. Methods During the implementation of a multi-site, randomized controlled trial (RCT) of organizational interventions to reduce resident falls in eight nursing homes, we inductively developed, and later codified the TECH. The TECH was developed through processes that emerged from interactions among research team members and nursing home staff participants, including a purposive use of complexity science principles. Results The TECH provided a structure to assess challenges systematically, consider their potential impact on intervention feasibility and fidelity, and determine actions to take. We codified the process into an algorithm that can be adopted or adapted for other research projects. We present selected examples of the use of the TECH that are relevant to many complex interventions. Conclusions Complexity theory provides a useful lens through which research procedures can be developed to address implementation challenges that emerge from complex organizations and research designs. Sense-making is a group process in which diverse members interpret challenges when available information is ambiguous; the groups’ interpretations provide cues for taking action. Sense-making facilitates the creation of safe environments for generating innovative solutions that balance research integrity and practical issues. The challenges encountered during implementation of complex interventions are often unpredictable; however, adoption of a systematic process will allow investigators to address them in a consistent yet flexible manner, protecting fidelity. Research integrity is also protected by allowing for appropriate adaptations to intervention protocols that preserve the feasibility of ‘real world’ interventions. PMID:23281623
NCRVE Change Agent. Shaping the Future of Vocational Education. Volume 4, 1994.

ERIC Educational Resources Information Center

NCRVE Change Agent, 1994

1994-01-01

The first of four issues in this volume consists of four review articles. "Tech Prep Quality" reviews a guide to total quality management and tech prep. "Specific, Ocean to Ocean" reviews a publication that identifies 10 preliminary plans for implementing tech prep. "...No Single Option" is about a monograph that evaluates tech prep and other…
Selected Outcomes Related to Tech Prep Implementation by Illinois Consortia, 2001-2005

ERIC Educational Resources Information Center

Bragg, Debra D.; Kirby, Catherine; Zhu, Rongchun

2006-01-01

This report is the summary of key aspects of Tech Prep in Illinois over the five year period of 2001-2005 during which all Tech Prep consortia provided annual data based on federal legislative requirements and state-determined essential elements of successful programs. These annual Tech Prep reports enable local educators to monitor student…
Alumni Giving at Arkansas Tech University: College Experiences and Motivations to Give as Predictors of Giving Behavior

ERIC Educational Resources Information Center

Lackie, Mary Bane

2010-01-01

The purpose of this study was to examine the characteristics of the "Lost Generation" alumni who ended their attendance or graduated from Arkansas Tech University (Tech) between January 1973 and December 1995 relating to their demographic characteristics, perceptions of college experiences, involvement with Tech after graduation, and attitudes…
77 FR 26588 - In the Matter of Recycle Tech, Inc.; Order of Suspension of Trading

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-04

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of Recycle Tech, Inc.; Order of Suspension of Trading May 2, 2012. It appears to the Securities and Exchange Commission that there is a lack of current and accurate information concerning the securities of Recycle Tech, Inc. (``Recycle Tech...
Cost Reduction Through the Use of Additive Manufacturing (3d Printing) and Collaborative Product Life Cycle Management Technologies to Enhance the Navy’s Maintenance Programs

DTIC Science & Technology

2013-09-01

the order from the DLA; convenes a meeting with tech librarians , engineers, machinists, quality assurance (QA) inspectors, and mechanics to assess...created, begins the in-house process. 3. Research of Technical Drawings The tech librarian reviews the applicable repository for any tech drawings...applicable to Widget A. If none are found, the tech librarian contacts the OEM and other D-Level activities to find out whether the tech drawing is out
SpaceTech—Postgraduate space education

NASA Astrophysics Data System (ADS)

de Bruijn, Ferdi J.; Ashford, Edward W.; Larson, Wiley J.

2008-07-01

SpaceTech is a postgraduate program geared primarily for mid-career space professionals seeking to gain or improve their expertise in space systems engineering and in business engineering. SpaceTech provides a lifelong impact on its participants by broadening their capabilities, encouraging systematic "end-to-end" thinking and preparing them for any technical or business-related engineering challenges they may encounter. This flexible 1-year program offers high competency gain and increased business skills. It is held in attractive locations in a flexible, multi-cultural environment. SpaceTech is a highly effective master's program certified by the esteemed Technical University of Delft (TUD), Netherlands. SpaceTech provides expert instructors who place no barriers between themselves and participants. The program combines innovative and flexible new approaches with time-tested methods to give participants the skills required for future missions and new business, while allowing participants to meet their work commitments at the same time as they study for their master's degree. The SpaceTech program is conducted in separate sessions, generally each of 2-week duration, separated by periods of some 6-8 weeks, during which time participants may return to their normal jobs. It also includes introductory online course material that the participants can study at their leisure. The first session is held at the TUD, with subsequent sessions held at strategic space agency locations. By participating at two or more of these sessions, attendees can earn certificates of satisfactory completion from TU Delft. By participating in all of the sessions, as well as taking part in the companion Central Case Project (CCP), participants earn an accredited and highly respected master's degree in Space Systems Engineering from the TUD. Seven distinct SpaceTech modules are provided during these sessions: Space Mission Analysis and Design, Systems Engineering, Business Engineering, Interpersonal Skills, Telecommunications, Earth Observation and Navigation. A group CCP, a major asset of this unique program, is a focused project, aimed at the formation of a credible virtual commercial space-related business. Participants exercise space systems engineering fundamentals as well as marketing and business engineering tools, with the goal of creating a financially viable business opportunity. They then present the result, in the form of an unsolicited proposal to potential investors, as well as a varied group of engineers, managers and executives from the space community. During the CCP, participants learn the ties between mission and system design and the potential return to investors. They develop an instinct for the technical concepts and which of the parameters to adjust to make their newly conceived business more effective and profitable.
Modeling merging behavior at lane drops : [tech transfer summary].

DOT National Transportation Integrated Search

2015-02-01

A better understanding of the merging behavior of drivers will lead : to the development of better lane-drop traffic-control plans and : strategies, which will provide better guidance to drivers for safer : merging.
High Technology and International Labour Markets.

ERIC Educational Resources Information Center

Carnoy, Martin

1985-01-01

The author examines the impact of "high-tech" industries on labor markets, the division of labor and the organization of work, and the policy options open to societies for dealing with the effects. (CT)
Disability Evaluation System Analysis and Research Annual Report 2017

DTIC Science & Technology

2017-11-20

Amanda L. Kelley, MPH Program Manager, AMSARA Deputy Program Manager, AMSARA Contractor, ManTech Health Contractor, ManTech Health Christine...Toolin, MS Cordie K. Campbell, MPH Public Health Analyst, AMSARA Public Health Analyst, AMSARA Contractor, ManTech Health Contractor...ManTech Health Preventive Medicine Branch Walter Reed Army Institute of Research 503 Robert Grant Road, Forest Glen Annex Silver
A Summary/Overview of Ejector Augmentor Theory and Performance. Volume 2. Bibliography

DTIC Science & Technology

1979-09-01

Science, Tech. Rept. TR-UTA-773, April 1977. 264 SPSF P T Covert, E. E., and Haldeman, C. W., "A One-Dimensional Model for NS Compressible Flow in the...H., "Hydrodynamics of SS vertical liquid-solids transport", Ind. & Engng. Chem. - Process Des. & Dev., 14, 3, pp 264 -9 (July, 1975). 755 SPSF A...Margolis, S. G., "Steam jet pump operation at high pressures", SS Bettis Tech. Review. WAPD -BT-14, pp. 120-141. (July, 1959). 877 SPSF A, A, Mark, L
TechEdSat Nano-Satellite Series Fact Sheet

NASA Technical Reports Server (NTRS)

Murbach, Marcus; Martinez, Andres; Guarneros Luna, Ali

2014-01-01

TechEdSat-3p is the second generation in the TechEdSat-X series. The TechEdSat Series uses the CubeSat standards established by the California Polytechnic State University Cal Poly), San Luis Obispo. With typical blocks being constructed from 1-unit (1U 10x10x10 cm) increments, the TechEdSat-3p has a 3U volume with a 30 cm length. The project uniquely pairs advanced university students with NASA researchers in a rapid design-to-flight experience lasting 1-2 semesters.The TechEdSat Nano-Satellite Series provides a rapid platform for testing technologies for future NASA Earth and planetary missions, as well as providing students with an early exposure to flight hardware development and management.

A ``Cyber Wind Facility'' for HPC Wind Turbine Field Experiments

NASA Astrophysics Data System (ADS)

Brasseur, James; Paterson, Eric; Schmitz, Sven; Campbell, Robert; Vijayakumar, Ganesh; Lavely, Adam; Jayaraman, Balaji; Nandi, Tarak; Jha, Pankaj; Dunbar, Alex; Motta-Mena, Javier; Craven, Brent; Haupt, Sue

2013-03-01

The Penn State ``Cyber Wind Facility'' (CWF) is a high-fidelity multi-scale high performance computing (HPC) environment in which ``cyber field experiments'' are designed and ``cyber data'' collected from wind turbines operating within the atmospheric boundary layer (ABL) environment. Conceptually the ``facility'' is akin to a high-tech wind tunnel with controlled physical environment, but unlike a wind tunnel it replicates commercial-scale wind turbines operating in the field and forced by true atmospheric turbulence with controlled stability state. The CWF is created from state-of-the-art high-accuracy technology geometry and grid design and numerical methods, and with high-resolution simulation strategies that blend unsteady RANS near the surface with high fidelity large-eddy simulation (LES) in separated boundary layer, blade and rotor wake regions, embedded within high-resolution LES of the ABL. CWF experiments complement physical field facility experiments that can capture wider ranges of meteorological events, but with minimal control over the environment and with very small numbers of sensors at low spatial resolution. I shall report on the first CWF experiments aimed at dynamical interactions between ABL turbulence and space-time wind turbine loadings. Supported by DOE and NSF.
Ramp management and control handbook

DOT National Transportation Integrated Search

1999-03-01

Tech Brief: Description study of driving simulator study to assess truck driver fatigue or alertness as affected by non-driving, but on-duty activities, such as loading/unloading a vehicle. It also examined the effects of driver performance on extend...
FAR-TECH's Nanoparticle Plasma Jet System and its Application to Disruptions, Deep Fueling, and Diagnostics

NASA Astrophysics Data System (ADS)

Thompson, J. R.; Bogatu, I. N.; Galkin, S. A.; Kim, J. S.

2012-10-01

Hyper-velocity plasma jets have potential applications in tokamaks for disruption mitigation, deep fueling and diagnostics. Pulsed power based solid-state sources and plasma accelerators offer advantages of rapid response and mass delivery at high velocities. Fast response is critical for some disruption mitigation scenario needs, while high velocity is especially important for penetration into tokamak plasma and its confining magnetic field, as in the case of deep fueling. FAR-TECH is developing the capability of producing large-mass hyper-velocity plasma jets. The prototype solid-state source has produced: 1) >8.4 mg of H2 gas only, and 2) >25 mg of H2 and >180 mg of C60 in a H2/C60 gas mixture. Using a coaxial plasma gun coupled to the source, we have successfully demonstrated the acceleration of composite H/C60 plasma jets, with momentum as high as 0.6 g.km/s, and containing an estimated C60 mass of ˜75 mg. We present the status of FAR-TECH's nanoparticle plasma jet system and discuss its application to disruptions, deep fueling, and diagnostics. A new TiH2/C60 solid-state source capable of generating significantly higher quantities of H2 and C60 in <0.5 ms will be discussed.
Not just smoking and high-tech medicine: socioeconomic inequities in US mortality rates, overall and by race/ethnicity, 1960–2006

PubMed Central

Krieger, Nancy; Chen, Jarvis T.; Kosheleva, Anna; Waterman, Pamela D.

2011-01-01

Recent research on the post-1980 widening of US socioeconomic mortality inequalities has emphasized the contribution of smoking and high-tech medicine, with some studies treating the growing inequalities as effectively inevitable. No studies, however, have analyzed long-term trends in US mortality rates and inequities unrelated to smoking or due to lack of basic medical care, even as a handful have shown that US socioeconomic inequalities in overall mortality shrank between the mid-1960s and 1980. We accordingly analyzed US mortality data for 1960–2006, stratified by county income quintile and race/ethnicity, for mortality unrelated to smoking and preventable by 1960s standards of medical care. Key findings were that relative and absolute socioeconomic inequalities in US mortality unrelated to smoking and preventable by 1960s medical care standards shrank between the 1960s and 1980 and then increased and stagnated, with absolute rates on par with several leading causes of death, and with the burden worst for US populations of color. None of these findings can be attributed to trends in smoking-related deaths and access to high-tech medicine, and they also demonstrate that socioeconomic inequities in mortality can shrink and need not inevitably rise. PMID:22611656
PREFACE: 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015)

NASA Astrophysics Data System (ADS)

Gaol, F. L.

2015-06-01

The 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015), was held at The Westin Resort Nusa Dua, Bali on 31 January - 1 February 2015. The ScieTech 2015 conference is aimed to bring together researchers, engineers and scientists from around the world. ScieTech 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within mathematics, chemistry and physics. As we already know that science and technology have brought tremendous benefits for human civilization. People are becoming healthier, wealthier, better educated, more peaceful, increasingly connected, and living longer. Of course, science and technology provide many answers to global challenges, but we will face more complex problems in the next decade due to increasing world population, limitation of energy, and climate change. Therefore, researchers should be more active in conducting research that enables collaboration between one and the others. Interdisciplinary cooperation is absolutely necessary in order to create a smart system for solving the global problems. We need a global and general long-term view of the future with long-range goals for solving complex problems in next decade. Therefore the conference was held to be a forum for researchers from different disciplines to start collaborating and conducting research that provides a solution to the global issues. The theme of ScieTech 2015 was ''The interdisciplinary Application between Mathematics, Chemistry and Physics to enhance the Quality of Life''. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting conference program as well as the invited and plenary speakers. This year, we received 197 papers and after rigorous review, 59 papers were accepted. The participants came from 19 countries, and there were six paralell sessions and four keynote speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2015.
34 CFR 406.31 - How does a State carry out the State-Administered Tech-Prep Education Program?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 34 Education 3 2011-07-01 2011-07-01 false How does a State carry out the State-Administered Tech... TECH-PREP EDUCATION PROGRAM What Conditions Must Be Met After a State Receives an Award? § 406.31 How does a State carry out the State-Administered Tech-Prep Education Program? (a) A State board carries...
Heat pipes for low-humidity applications

NASA Technical Reports Server (NTRS)

Khattar, Mukesh K.

1989-01-01

A novel application of an air-to-air heat pipe heat exchanger (HPHX) in a cooling and dehumidification process of an air-conditioning system is described which provides significant energy savings in applications requiring reheat of cold supply air to maintain low humidity. The efficiency of the system has been demonstrated in an application requiring a humidity of 40 percent. The use of the HPHX and fine tuning of the air-conditioning system and controls has resulted in significant energy savings. The technology can be advantageously used in many low-humidity applications commonly encountered in high-tech and aerospace facilities.
Influence of Stepped Osteotomy on Primary Stability of Implants Inserted in Low-Density Bone Sites: An In Vitro Study.

PubMed

Degidi, Marco; Daprile, Giuseppe; Piattelli, Adriano

The aims of this study were to evaluate the ability of a stepped osteotomy to improve dental implant primary stability in low-density bone sites and to investigate possible correlations between primary stability parameters. The study was performed on fresh humid bovine bone classified as type III. The test group consisted of 30 Astra Tech EV implants inserted following the protocol provided by the manufacturer. The first control group consisted of 30 Astra Tech EV implants inserted in sites without the underpreparation of the apical portion. The second control group consisted of 30 Astra Tech TX implants inserted following the protocol provided by the manufacturer. Implant insertion was performed at the predetermined 30 rpm. The insertion torque data were recorded and exported as a curve; using a trapezoidal integration technique, the area underlying the curve was calculated: this area represents the variable torque work (VTW). Peak insertion torque (pIT) and resonance frequency analysis (RFA) were also recorded. A Mann-Whitney test showed that the mean VTW was significantly higher in the test group compared with the first control and second control groups; furthermore, statistical analysis showed that pIT also was significantly higher in the test group compared with the first and second control groups. Analyzing RFA values, only the difference between the test group and second control group showed statistical significance. Pearson correlation analysis showed a very strong positive correlation between pIT and VTW values in all groups; furthermore, it showed a positive correlation between pIT and RFA values and between VTW and RFA values only in the test group. Within the limitations of an in vitro study, the results show that stepped osteotomy can be a viable method to improve implant primary stability in low-density bone sites, and that, when a traditional osteotomy method is performed, RFA presents no correlation with pIT and VTW.
Development of a disposable magnetically levitated centrifugal blood pump (MedTech Dispo) intended for bridge-to-bridge applications--two-week in vivo evaluation.

PubMed

Nagaoka, Eiki; Someya, Takeshi; Kitao, Takashi; Kimura, Taro; Ushiyama, Tomohiro; Hijikata, Wataru; Shinshi, Tadahiko; Arai, Hirokuni; Takatani, Setsuo

2010-09-01

Last year, we reported in vitro pump performance, low hemolytic characteristics, and initial in vivo evaluation of a disposable, magnetically levitated centrifugal blood pump, MedTech Dispo. As the first phase of the two-stage in vivo studies, in this study we have carried out a 2-week in vivo evaluation in calves. Male Holstein calves with body weight of 62.4–92.2 kg were used. Under general anesthesia, a left heart bypass with a MedTech Dispo pump was instituted between the left atrium and the descending aorta via left thoracotomy. Blood-contacting surface of the pump was coated with a 2-methacryloyloxyethyl phosphorylcholine polymer. Post-operatively, with activated clotting time controlled at 180–220 s using heparin and bypass flow rate maintained at 50 mL/kg/min, plasma-free hemoglobin (Hb), coagulation, and major organ functions were analyzed for evaluation of biocompatibility. The animals were electively sacrificed at the completion of the 2-week study to evaluate presence of thrombus inside the pump,together with an examination of major organs. To date, we have done 13 MedTech Dispo implantations, of which three went successfully for a 2-week duration. In these three cases, the pump produced a fairly constant flow of 50 mL/Kg/min. Neurological disorders and any symptoms of thromboembolism were not seen. Levels of plasma-free Hb were maintained very low. Major organ functions remained within normal ranges. Autopsy results revealed no thrombus formation inside the pump. In the last six cases, calves suffered from severe pneumonia and they were excluded from the analysis. The MedTech Dispo pump demonstrated sufficient pump performance and biocompatibility to meet requirements for 1-week circulatory support. The second phase (2-month in vivo study) is under way to prove the safety and efficacy of MedTech Dispo for 1-month applications. © 2010, Copyright the Authors. Artificial Organs © 2010, International Center for Artificial Organs and Transplantation and Wiley Periodicals, Inc.
KSC-2012-3996

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – At the Shuttle Landing Facility at NASA’s Kennedy Space Center in Florida, students and their flight instructors from Florida Tech, or FIT, in Melbourne, tour the midfield Air Traffic Control Tower. The instructors and their students arrived at the SLF in Cherokee Warrior and Cessna 172S lightweight aircraft. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett
High Tech High.

ERIC Educational Resources Information Center

Hardy, Lawrence

2001-01-01

In an era of high-stakes testing and prescriptive teaching styles, a San Diego charter high school embraces project learning, multilevel classrooms, and video portfolios of student work. The school lacks dining, music, and athletic facilities, but features hefty teacher salaries, student freedom, and real-world problem solving. (MLH)
NOx Control for Utility Boiler OTR Compliance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamid Farzan

Under sponsorship of the Department of Energy's National Energy Technology Laboratory (NETL), the Babcock and Wilcox Company (B and W), and Fuel Tech teamed together to investigate an integrated solution for NO{sub x} control. The system is comprised of B and W's DRB-4Z{trademark} ultra low-NO{sub x} pulverized coal (PC) burner technology and Fuel Tech's NOxOUT{reg_sign}, a urea-based selective non-catalytic reduction (SNCR) technology. Development of the low-NO{sub x} burner technology has been a focus in B and W's combustion program. The DRB-4Z{trademark} burner is B and W's newest low-NO{sub x} burner capable of achieving very low NO{sub x}. The burner ismore » designed to reduce NO{sub x} by controlled mixing of the fuel and air. Based on data from several 500 to 600 MWe boilers firing PRB coal, NOx emissions levels of 0.15 to 0.20 lb/ 106 Btu have been achieved from the DRB-4Z{trademark} burners in combination with overfire air ports. Although NOx emissions from the DRB-4Z{trademark} burner are nearing the Ozone Transport Rule (OTR) level of 0.15 lb NO{sub x}/106 Btu, the utility boiler owners can still benefit from the addition of an SNCR and/or SCR system in order to comply with the stringent NO{sub x} emission levels facing them. Large-scale testing is planned in B and W's 100-million Btu/hr Clean Environment Development Facility (CEDF) that simulates the conditions of large coal-fired utility boilers. The objective of the project is to achieve a NO{sub x} level below 0.15 lb/106 Btu (with ammonia slip of less than 5 ppm) in the CEDF using PRB coal and B and W's DRB-4Z{trademark} low-NO{sub x} pulverized coal (PC) burner in combination with dual zone overfire air ports and Fuel Tech's NO{sub x}OUT{reg_sign}. During this period B and W prepared and submitted the project management plan and hazardous substance plan to DOE. The negotiation of a subcontract for Fuel Tech has been started.« less
NASA tech brief evaluations

NASA Technical Reports Server (NTRS)

Workman, Gary L.

1994-01-01

A major step in transferring technology is to disseminate information about new developments to the appropriate sector(s). A useful vehicle for transferring technology from the government sector to industry has been demonstrated with the use of periodical and journal announcements to highlight technological achievements which may meet the needs of industries other than the one who developed the innovation. To meet this end, NASA has very successfully pursued the goal of identifying technical innovations through the national circulation publication; NASA Tech Briefs. At one time the Technology Utilization Offices of the various centers coordinated the selection of appropriate technologies through a common channel. In recent years, each NASA field center has undertaken the task of evaluating submittals for Tech Brief publication independently of the others. The University of Alabama in Huntsville was selected to assist MSFC in evaluating technology developed under the various programs managed by the NASA center for publication in the NASA Tech Briefs journal. The primary motivation for the NASA Tech Briefs publication is to bring to the attention of industry the various NASA technologies which, in general, have been developed for a specific aerospace requirement, but has application in other areas. Since there are a number of applications outside of NASA that can benefit from innovative concepts developed within the MSPC programs, the ability to transfer technology to other sectors is very high. In most cases, the innovator(s) are not always knowledgeable about other industries which might potentially benefit from their innovation. The evaluation process can therefore contribute to the list of potential users through a knowledgeable evaluator.
Subsonic Ultra Green Aircraft Research. Phase II - Volume I; Truss Braced Wing Design Exploration

NASA Technical Reports Server (NTRS)

Bradley, Marty K.; Droney, Christopher K.; Allen, Timothy J.

2015-01-01

This report summarizes the Truss Braced Wing (TBW) work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, consisting of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, Georgia Tech, Virginia Tech, NextGen Aeronautics, and Microcraft. A multi-disciplinary optimization (MDO) environment defined the geometry that was further refined for the updated SUGAR High TBW configuration. Airfoil shapes were tested in the NASA TCT facility, and an aeroelastic model was tested in the NASA TDT facility. Flutter suppression was successfully demonstrated using control laws derived from test system ID data and analysis models. Aeroelastic impacts for the TBW design are manageable and smaller than assumed in Phase I. Flutter analysis of TBW designs need to include pre-load and large displacement non-linear effects to obtain a reasonable match to test data. With the updated performance and sizing, fuel burn and energy use is reduced by 54% compared to the SUGAR Free current technology Baseline (Goal 60%). Use of the unducted fan version of the engine reduces fuel burn and energy by 56% compared to the Baseline. Technology development roadmaps were updated, and an airport compatibility analysis established feasibility of a folding wing aircraft at existing airports.
Pharmacist and Technician Perceptions of Tech-Check-Tech in Community Pharmacy Practice Settings.

PubMed

Frost, Timothy P; Adams, Alex J

2018-04-01

Tech-check-tech (TCT) is a practice model in which pharmacy technicians with advanced training can perform final verification of prescriptions that have been previously reviewed for appropriateness by a pharmacist. Few states have adopted TCT in part because of the common view that this model is controversial among members of the profession. This article aims to summarize the existing research on pharmacist and technician perceptions of community pharmacy-based TCT. A literature review was conducted using MEDLINE (January 1990 to August 2016) and Google Scholar (January 1990 to August 2016) using the terms "tech* and check," "tech-check-tech," "checking technician," and "accuracy checking tech*." Of the 7 studies identified we found general agreement among both pharmacists and technicians that TCT in community pharmacy settings can be safely performed. This agreement persisted in studies of theoretical TCT models and in studies assessing participants in actual community-based TCT models. Pharmacists who had previously worked with a checking technician were generally more favorable toward TCT. Both pharmacists and technicians in community pharmacy settings generally perceived TCT to be safe, in both theoretical surveys and in surveys following actual TCT demonstration projects. These perceptions of safety align well with the actual outcomes achieved from community pharmacy TCT studies.
Assessment of non-destructive testing technologies for quality control/quality assurance of asphalt mixtures : [tech transfer summary].

DOT National Transportation Integrated Search

2015-02-01

Evaluation of the actual performance (quality) of pavements requires : in situ nondestructive testing (NDT) techniques that can accurately : measure the most critical, objective, and sensitive properties of : pavement systems.
Control of embankment settlement field verification on PCPT prediction methods : tech summary.

DOT National Transportation Integrated Search

2011-07-01

Depending on loading and embankment height, the magnitude and progression of settlement can signifi cantly impact the safety and : serviceability of the infrastructures that are constructed on saturated fi ne-grained soils. Therefore, the constructio...
Get on Board the Cost Effective Way: A Tech Prep Replication Process.

ERIC Educational Resources Information Center

Moore, Wayne A.; Szul, Linda F.; Rivosecchi, Karen

1997-01-01

The Northwestern Pennsylvania Tech Prep Consortium model for replicating tech prep programs includes these steps: fact finding, local industry analysis, curriculum development, detailed description, marketing strategies, implementation, and program evaluation. (SK)
Programmed Control of Optical Grating Scales for Visual Research.

DTIC Science & Technology

1980-12-01

A -AOO .9 AIR FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOO--ETC F/6 14/2 PROGRAMMED CONTROL OF OPTI CAL GRATING SCALES FOR VISUAL RESEARC --ETC(fl...custom system for AMRL. The cost in memory parts alone was $40,000, a good indication that the market is not over-priced. Ca-? western Reserve
A Librarian Without Books:Systems Librarianship in Astronomy

NASA Astrophysics Data System (ADS)

Kneale, R. A.

2007-10-01

The author discusses one aspect of the changing nature of librarianship by focusing on a high-tech microcosm of an already high-tech profession, that of systems librarianship. She is the Systems Librarian for the Advanced Technology Solar Telescope (ATST) project, based in Tucson, Arizona. The project is engaged in the design and development of a 4-meter solar telescope, planned for the summit of Haleakalā, Maui, Hawai'i. Most of the day-to-day tasks at ATST involve software in one form or another; the author makes heavy use of Remote Desktop and Virtual Network Computing (VNC) to manage installations on eight different servers (four Windows, four Unix) in two states, plus staff desktops (Windows XP) from the comfy chair in front of her computer.

High Technology Needs Assessment.

ERIC Educational Resources Information Center

Southeastern Louisiana Univ., Hammond.

A project produced a high technology status report providing needs assessment data for educational planning. The purpose was to determine the impact and future of high technology in Louisiana. Information was obtained from 68 Louisiana manufacturing industries by mailed questionnaire. Data indicated that 45 industries were involved in high tech. A…
NASA Tech Briefs, July 2005

NASA Technical Reports Server (NTRS)

2005-01-01

Thin-Film Resistance Heat-Flux Sensors Circuit Indicates that Voice-Recording Disks are Nearly Full Optical Sensing of Combustion Instabilities in Gas Turbines Topics include: Crane-Load Contact Sensor; Hexagonal and Pentagonal Fractal Multiband Antennas; Multifunctional Logic Gate Controlled by Temperature; Multifunctional Logic Gate Controlled by Supply Voltage; Power Divider for Waveforms Rich in Harmonics; SCB Quantum Computers Using iSWAP and 1-Qubit Rotations; CSAM Metrology Software Tool; Update on Rover Sequencing and Visualization Program; Selecting Data from a Star Catalog; Rotating Desk for Collaboration by Two Computer Programmers; Variable-Pressure Washer; Magnetically Attached Multifunction Maintenance Rover; Improvements in Fabrication of Sand/Binder Cores for Casting; Solid Freeform Fabrication of Composite-Material Objects; Efficient Computational Model of Hysteresis; Gauges for Highly Precise Metrology of a Compound Mirror; Improved Electrolytic Hydrogen Peroxide Generator; High-Power Fiber Lasers Using Photonic Band Gap Materials; Ontology-Driven Information Integration; Quantifying Traversability of Terrain for a Mobile Robot; More About Arc-Welding Process for Making Carbon Nanotubes; Controlling Laser Spot Size in Outer Space; or Software-Reconfigurable Processors for Spacecraft.
How To Implement a Tech Prep Program Based on the Rhode Island Model. Tech Prep Associate Degree Program. Technical Programs. Business/Office Administration Programs. Allied Health/Dental Health Programs.

ERIC Educational Resources Information Center

Community Coll. of Rhode Island, Warwick.

This implementation guide contains information based on experiences that occurred during the development and implementation of the Rhode Island Tech Prep Model. It is intended to assist educators in addressing challenges and obstacles faced by the program early in the planning process. It begins with a rationale for tech prep. Rhode Island…
a Study on the Document Information Service of the National Agricultural Library for Agricultural Sci-Tech Innovation in China

NASA Astrophysics Data System (ADS)

Xu, Qian; Meng, Xianxue

This paper presents the significant function of the Chinese National Agricultural Library (CNAL) in the agricultural sci-tech innovation system in China, analyses the development of collection and service in the CNAL, explores the challenge towards sustain and develop information services for the agricultural sci-tech research and innovation, at last proposes the strategy for sci-tech document information service development.
Small, modular, low-cost coal-fired power plants for the international market

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zauderer, B.; Frain, B.; Borck, B.

1997-12-31

This paper presents recent operating results of Coal Tech`s second generation, air cooled, slagging coal combustor, and its application to power plants in the 1 to 20 MW range. This 20 MMBtu/hour combustor was installed in a new demonstration plant in Philadelphia, PA in 1995. It contains the combustion components of a 1 MWe coal fired power plant, a 17,500 lb/hour steam boiler, coal storage and feed components, and stack gas cleanup components. The plant`s design incorporates improvements resulting from 2,000 hours of testing between 1987 and 1993 on a first generation, commercial scale, air cooled combustor of equal thermalmore » rating. Since operations began in early 1996, a total of 51 days of testing have been successfully completed. Major results include durability of the combustor`s refractory wall, excellent combustion with high ash concentration in the fuel, removal of 95% to 100% of the slag in the combustor, very little ash deposition in the boiler, major reduction of in-plant parasitic power, and simplified power system control through the use of modular designs of sub-systems and computer control. Rapid fuel switching between oil, gas, and coal and turndown of up to a factor of three was accomplished. All these features have been incorporated in advanced coal fired plant designs in the 1 to 20 MWe range. Incremental capital costs are only $100 to $200/kW higher than comparable rated gas or oil fired steam generating systems. Most of its components and subsystems can be factory assembled for very rapid field installation. The low capital, low operating costs, fuel flexibility, and compatibility with very high ash fuels, make this power system very attractive in regions of the world having domestic supplies of these fuels.« less
Cosmetic Procedure Questions

MedlinePlus

... options include laser treatments, high-tech light devices, chemical peels, dermabrasion, liposuction, lifts, vein treatments, soft-tissue fillers, neuromodulators (Botox) and hair restoration among others. The first thing to remember ...
High Touch and High Tech (HT2) Proposal: Transforming Patient Engagement Throughout the Continuum of Care by Engaging Patients with Portal Technology at the Bedside.

PubMed

McAlearney, Ann Scheck; Sieck, Cynthia J; Hefner, Jennifer L; Aldrich, Alison M; Walker, Daniel M; Rizer, Milisa K; Moffatt-Bruce, Susan D; Huerta, Timothy R

2016-11-29

For patients with complex care needs, engagement in disease management activities is critical. Chronic illnesses touch almost every person in the United States. The costs are real, personal, and pervasive. In response, patients often seek tools to help them manage their health. Patient portals, personal health records tethered to an electronic health record, show promise as tools that patients value and that can improve health. Although patient portals currently focus on the outpatient experience, the Ohio State University Wexner Medical Center (OSUWMC) has deployed a portal designed specifically for the inpatient experience that is connected to the ambulatory patient portal available after discharge. While this inpatient technology is in active use at only one other hospital in the United States, health care facilities are currently investing in infrastructure necessary to support large-scale deployment. Times of acute crisis such as hospitalization may increase a patient's focus on his/her health. During this time, patients may be more engaged with their care and especially interested in using tools to manage their health after discharge. Evidence shows that enhanced patient self-management can lead to better control of chronic illness. Patient portals may serve as a mechanism to facilitate increased engagement. The specific aims of our study are (1) to investigate the independent effects of providing both High Tech and High Touch interventions on patient-reported outcomes at discharge, including patients' self-efficacy for managing chronic conditions and satisfaction with care; and (2) to conduct a mixed-methods analysis to determine how providing patients with access to MyChart Bedside (MCB, High Tech) and training/education on patient portals, and MyChart Ambulatory (MCA, High Touch) will influence engagement with the patient portal and relate to longer-term outcomes. Our proposed 4-year study uses a mixed-methods research (MMR) approach to evaluate a randomized controlled trial studying the effectiveness of a High Tech intervention (MCB, the inpatient portal), and an accompanying High Touch intervention (training patients to use the portal to manage their care and conditions) in a sample of hospitalized patients with two or more chronic conditions. This study measures how access to a patient portal tailored to the inpatient stay can improve patient experience and increase patient engagement by (1) improving patients' perceptions of the process of care while in the hospital; (2) increasing patients' self-efficacy for managing chronic conditions; and (3) facilitating continued use of a patient portal for care management after discharge. In addition, we aim to enhance patients' use of the portal available to outpatients (MCA) once they are discharged. This study has been funded by the Agency for Healthcare Research and Quality (AHRQ). Research is ongoing and expected to conclude in August 2019. Providing patients real-time access to health information can be a positive force for change in the way care is provided. Meaningful use policies require minimum demonstrated use of patient portal technology, most often in the ambulatory setting. However, as the technology matures to bridge the care transition, there is a greater need to understand how patient portals transform care delivery. By working in concert with patients to address and extend current technologies, our study aims to advance efforts to increase patients' engagement in their care and develop a template for how other hospitals might integrate similar technologies. ©Ann Scheck McAlearney, Cynthia J Sieck, Jennifer L Hefner, Alison M Aldrich, Daniel M Walker, Milisa K Rizer, Susan D Moffatt-Bruce, Timothy R Huerta. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 29.11.2016.
Analytical Chemistry Laboratory

NASA Technical Reports Server (NTRS)

Anderson, Mark

2013-01-01

The Analytical Chemistry and Material Development Group maintains a capability in chemical analysis, materials R&D failure analysis and contamination control. The uniquely qualified staff and facility support the needs of flight projects, science instrument development and various technical tasks, as well as Cal Tech.
Two community distracted driving programs reduce hand-held phone use : traffic tech.

DOT National Transportation Integrated Search

2014-03-01

NHTSAs high-visibility enforcement (HVE) model : is a proven technique to change driver behavior and : change it quickly, thereby enhancing the effect of traffic : laws. HVE combines strong laws, vigorous highly visible : law enforcement activity,...
High Tech: A Place in Our Lives and in Our Schools.

ERIC Educational Resources Information Center

Roach, John V.

1986-01-01

Discusses various aspects of high technology: computers in cars, computer-assisted design and manufacturing, computers in telephones, video recorders, laser technology, home computers, job training, computer education, and the challenge to the technology teacher. (CT)
Case Study: Walhalla High School, Walhalla, S.C.

ERIC Educational Resources Information Center

Southern Regional Education Board, Atlanta, GA.

In 1987, Walhalla High School in Walhalla, South Carolina, undertook a major restructuring effort to raise the school's standards and keep pace with the expectations of local high-tech businesses and industry. School and district leaders established an affiliation with the Southern Regional Education Board's High Schools That Work initiative,…
78 FR 14359 - Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-05

... Business Networks Services, Inc., Specialist-Tech Customer Service, Philadelphia, PA; Verizon Business Networks Services, Inc., Specialist-Tech Customer Service, Tampa, Florida; Amended Certification Regarding... Business Networks Services, Inc., Order Management Division, Philadelphia, Pennsylvania and Verizon...
High-resolution frequency measurement method with a wide-frequency range based on a quantized phase step law.

PubMed

Du, Baoqiang; Dong, Shaofeng; Wang, Yanfeng; Guo, Shuting; Cao, Lingzhi; Zhou, Wei; Zuo, Yandi; Liu, Dan

2013-11-01

A wide-frequency and high-resolution frequency measurement method based on the quantized phase step law is presented in this paper. Utilizing a variation law of the phase differences, the direct different frequency phase processing, and the phase group synchronization phenomenon, combining an A/D converter and the adaptive phase shifting principle, a counter gate is established in the phase coincidences at one-group intervals, which eliminates the ±1 counter error in the traditional frequency measurement method. More importantly, the direct phase comparison, the measurement, and the control between any periodic signals have been realized without frequency normalization in this method. Experimental results show that sub-picosecond resolution can be easily obtained in the frequency measurement, the frequency standard comparison, and the phase-locked control based on the phase quantization processing technique. The method may be widely used in navigation positioning, space techniques, communication, radar, astronomy, atomic frequency standards, and other high-tech fields.
High Tech for Milady's Makeup

NASA Technical Reports Server (NTRS)

1985-01-01

"Elizabeth," a computerized beauty analysis system marketed by Elizabeth Arden, is based upon an ARAC data base search of technologies measuring skin profiles. * "Elizabeth" is no longer commercially available.
76 FR 68243 - Youth Leadership Program: TechGirls

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-03

... DEPARTMENT OF STATE [Public Notice: 7671] Youth Leadership Program: TechGirls Overview Information Bureau of Educational and Cultural Affairs (ECA) Request for Grant Proposals: Youth Leadership Program... Cultural Affairs (ECA) announces an open competition for the new Youth Leadership Program ``TechGirls...
Materials Evaluation in the Tri-Service Thermal Radiation Test Facility.

DTIC Science & Technology

1984-06-20

CONTRACTORS (Continued) Science Applications Intl Corp Science Applications. Inc ATTN: S. Binninger ATTN: Tech Library Science Applications Intl Corp...Tech, Inc ATTN: Library Science Applications, Inc ATTN: Tech Library TRW Electronics & Defense Sector ATTN: h. Plows ATTN: B. Sussholtz ATTN: J
It's Your Game-Tech: Toward Sexual Health in the Digital Age.

PubMed

Shegog, Ross; Peskin, Melissa F; Markham, Christine; Thiel, Melanie; Karny, Efrat; Addy, Robert C; Johnson, Kimberly A; Tortolero, Susan

2014-08-01

Adolescent sexually transmitted infection (STI) and birth rates indicate a need for effective middle school HIV/STI, and pregnancy prevention curricula to delay, or mitigate consequences of, early sexual activity. Individual and organizational barriers to adoption, implementation, and maintenance, however, can hamper dissemination of evidence-based sexual health curricula, adversely impacting fidelity and reach. Internet-based approaches may help mitigate these barriers. This paper describes the development and feasibility testing of It's Your Game ( IYG )-Tech, a stand-alone 13-lesson Internet-based sexual health life-skills curriculum adapted from an existing effective sexual health curriculum-It's Your Game… Keep it Real ( IYG ). IYG -Tech development adaptation steps were to: 1) Select a suitable effective program and gather the original program materials; 2) Develop "proof of concept" lessons and test usability and impact; 3) Develop the program design document describing the core content, scope, and methods and strategies; and 4) produce the new program. Lab- and school-based tests with middle school students demonstrated high ratings on usability parameters and immediate impact on selected psychosocial factors related to sexual behavior-perceptions of friends' beliefs, reasons for not having sex, condom use self-efficacy, abstinence intentions, negotiating with others to protect personal rules, and improved knowledge about what constitutes healthy relationships (all p < .05). Youth rated IYG -Tech is favorably compared to other learning channels (>76.2% agreement) and rated the lessons as helpful in making healthy choices, selecting personal rules, detecting challenges to those rules, and protecting personal rules through negotiation and refusal skills (89.5% - 100%). Further efficacy testing is indicated for IYG -Tech as a potential strategy to deliver effective HIV/STI, and pregnancy prevention to middle school youth.
Clinical results of Hi-tech Knee II total knee arthroplasty in patients with rheumatoid athritis: 5- to 12-year follow-up.

PubMed

Yamanaka, Hajime; Goto, Ken-ichiro; Suzuki, Munetaka

2012-02-22

Total knee arthroplasty (TKA) is a common form of treatment to relieve pain and improve function in cases of rheumatoid arthritis (RA). Good clinical outcomes have been reported with a variety of TKA prostheses. The cementless Hi-Tech Knee II cruciate-retaining (CR)-type prosthesis, which has 6 fins at the anterior of the femoral component, posterior cruciate ligament (PCL) retention, flat-on-flat surface component geometry, all-polyethylene patella, strong initial fixation by the center screw of the tibial base plate, 10 layers of titanium alloy fiber mesh, and direct compression molded ultra high molecular weight polyethylene (UHMWPE), is appropriate for TKA in the Japanese knee.The present study was performed to evaluate the clinical results of primary TKA in RA using the cementless Hi-Tech Knee II CR-type prosthesis. We performed 32 consecutive primary TKAs using cementless Hi-Tech Knee II CR-type prosthesis in 31 RA patients. The average follow-up period was 8 years 3 months. Clinical evaluations were performed according to the American Knee Society (KS) system, knee score, function score, radiographic evaluation, and complications. The mean postoperative maximum flexion angle was 115.6°, and the KS knee score and function score improved to 88 and 70 after surgery, respectively. Complications, such as infection, occurred in 1 patient and revision surgery was performed. There were no cases of loosening in this cohort, and prosthesis survival rate was 96.9% at 12 years postoperatively. These results suggest that TKA using the cementless Hi-Tech Knee II CR-type prosthesis is a very effective form of treatment in RA patients at 5 to 12 years postoperatively. Further long-term follow-up studies are required to determine the ultimate utility of this type of prosthesis.
Technology | FNLCR Staging

Cancer.gov

The Frederick National Lab develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.
Test Your Knowledge

MedlinePlus

... inhalants on the rump. Leave this field blank Marijuana Question 1 Tetrahydrocannabinol is: Question 1: Options * A high tech gasoline A chemical in marijuana A brain neurotransmitter A dinosaur in Jurassic Park ...

Vo-Tech Prototype

ERIC Educational Resources Information Center

American School and University, 1978

1978-01-01

Solar energy, heat recovery, energy-saving design, and a unique cafeteria/theater are some of the features at the award-winning Tri-County Vocational-Technical Regional High School in Franklin, Massachusetts. (MLF)
Integration of instrumentation and processing software of a laser speckle contrast imaging system

NASA Astrophysics Data System (ADS)

Carrick, Jacob J.

Laser speckle contrast imaging (LSCI) has the potential to be a powerful tool in medicine, but more research in the field is required so it can be used properly. To help in the progression of Michigan Tech's research in the field, a graphical user interface (GUI) was designed in Matlab to control the instrumentation of the experiments as well as process the raw speckle images into contrast images while they are being acquired. The design of the system was successful and is currently being used by Michigan Tech's Biomedical Engineering department. This thesis describes the development of the LSCI GUI as well as offering a full introduction into the history, theory and applications of LSCI.
Competency Index. [Health Technology Cluster.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This competency index lists the competencies included in the 62 units of the Tech Prep Competency Profiles within the Health Technologies Cluster. The unit topics are as follows: employability skills; professionalism; teamwork; computer literacy; documentation; infection control and risk management; medical terminology; anatomy, physiology, and…
The Biological Control of Alligatorweed

DTIC Science & Technology

1975-03-01

andersoni, a new genus and species Injurious to alUgatorweed. Proc. Entomol. Soc. Wash. 70: 175-83. Pastrana, J. A. 1961. Una nueva Phycitidae...Lep.J paraslto de la lagunllla. Tech. Pub. 71, Secretaria de Estado de Agriculturay Ganaderia de la Nation, Instituto Naclonal de Tecnologia
Biodegradation of tech-hexachlorocyclohexane in a upflow anaerobic sludge blanket (UASB) reactor.

PubMed

Bhat, Praveena; Kumar, M Suresh; Mudliar, Sandeep N; Chakrabarti, T

2006-04-01

Biodegradability of technical grade hexachlorocyclohexane (tech-HCH) was studied in an upflow anaerobic sludge blanket reactor (UASB) under continuous mode of operation in concentration range of 100-200 mg/l and constant HRT of 48 h. At steady state operation more than 85% removal of tech-HCH (upto 175 mg/l concentration) and complete disappearance of beta-HCH was observed. Kinetic constants in terms of maximum specific tech-HCH utilization rate (k) and half saturation velocity constant (K(L)) were found to be 11.88 mg/g/day and 8.11 mg/g/day, respectively. The tech-HCH degrading seed preparation, UASB reactor startup and degradation in continuous mode of operation of the reactor is presented in this paper.
Washtenaw Technical Middle College--High School for the High Tech.

ERIC Educational Resources Information Center

Vandenberg, Victoria

1996-01-01

An alternative high school, called a technical middle college, focuses on preparing students for technical careers; it is articulated with Washtenaw Community College. The curriculum integrates applied academics, especially math and science, with work-based learning, giving students technical knowledge and workplace experience. (Author/JOW)
Nutritional Implications of High-Tech Foods, Should Combat Rations be High Fat or Low Fat

DTIC Science & Technology

1988-10-06

storage. It is self-evident that an individual that has energy stored for later use when energy intake does not meet energy expenditure will have a competitive advantage . Keywords: Symposia; Nutrition; Military rations.
The 2007 click it or ticket high-visibility seat belt mobilization : traffic tech.

DOT National Transportation Integrated Search

2010-09-01

In May 2007 the National Highway Traffic Safety Administration : sponsored the fifth national Click It or Ticket (CIOT) : high-visibility seat belt enforcement mobilization, which followed : the CIOT program model of earned and paid media : publicizi...
2-D Circulation Control Airfoil Benchmark Experiments Intended for CFD Code Validation

NASA Technical Reports Server (NTRS)

Englar, Robert J.; Jones, Gregory S.; Allan, Brian G.; Lin, Johb C.

2009-01-01

A current NASA Research Announcement (NRA) project being conducted by Georgia Tech Research Institute (GTRI) personnel and NASA collaborators includes the development of Circulation Control (CC) blown airfoils to improve subsonic aircraft high-lift and cruise performance. The emphasis of this program is the development of CC active flow control concepts for both high-lift augmentation, drag control, and cruise efficiency. A collaboration in this project includes work by NASA research engineers, whereas CFD validation and flow physics experimental research are part of NASA s systematic approach to developing design and optimization tools for CC applications to fixed-wing aircraft. The design space for CESTOL type aircraft is focusing on geometries that depend on advanced flow control technologies that include Circulation Control aerodynamics. The ability to consistently predict advanced aircraft performance requires improvements in design tools to include these advanced concepts. Validation of these tools will be based on experimental methods applied to complex flows that go beyond conventional aircraft modeling techniques. This paper focuses on recent/ongoing benchmark high-lift experiments and CFD efforts intended to provide 2-D CFD validation data sets related to NASA s Cruise Efficient Short Take Off and Landing (CESTOL) study. Both the experimental data and related CFD predictions are discussed.
GT | Government & Community Relations | Georgia Institute of Technology |

Science.gov Websites

Atlanta, GA Skip to content Georgia Tech Georgia Institute of Technology Government & Georgia Tech's Impact State Relations Capitol Jackets Advocacy Network Legislative Priorities & ; Resources Georgia Legislative Internship Program Georgia Tech's Impact 2018 PHELAP Conference Community &
NASA Tech Briefs, November 1998. Volume 22, No. 11

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage sections on test and measurement and sections on electronic components and circuits, electronic systems, software, materials, mechanics, machinery/automation, physical sciences, information sciences, book and reports, and special sections of Electronics Tech Briefs amd Rapid Product Development Tech Briefs.
Microprocessor Controlled Isometric Contractions of Cat Gastrocnemius Muscle.

DTIC Science & Technology

1981-12-01

A-A15 504 AIR FORCE INST OF TECH WRIGHT-PATTERSON AFS OH 5CHOO--ETC F/6 6/2 MICROPROCESSOR CONTROLLED ISOMETRIC CONTRACTIONS OF CAT GASTROC-ETC(U) D...CONTROLLED ISOMETRIC CONTRACTIONS OF CAT GASTROCNEMIUS MUSCLE THESIS Presented to the Faculty of the School of Engineering of the Air Force Institute of...1981 Appzoved for public release; distribution unlimited. AFIT/GE/EE/81D-4O \\ MICROPROCESSOR CONTROLLED ISOMETRIC COMUtCTIONS OF CAT GASTfOCNEMIUS i
The CNSE Public-Private Partnership Paradigm: A Driver for New York State and U.S. Educational, Research and Economic Excellence in the 21st Century

NASA Astrophysics Data System (ADS)

Cupoli, Edward M.

2009-10-01

The College of Nanoscale Science and Engineering (CNSE) of the University at Albany-SUNY is the first college in the world dedicated to education, research, development, and deployment in the emerging disciplines of nanoscience, nanoengineering, nanobioscience, and nanoeconomics. Envisioned and developed as a bold and unique educational, technological and business paradigm, the CNSE model has produced outcomes that are both significant and unparalleled: preparation of a highly educated, highly skilled workforce that is critical to driving opportunity and growth at all levels; acceleration of nanoscale research and development that is vital to advancing the commercialization of cutting-edge technologies and applications; and, generation of unmatched high-tech investment and job creation that are serving to foster a positive economic and societal impact throughout New York State, while also enhancing national competitiveness in the global innovation economy of the 21^st century. In less than a decade of operation, CNSE has become a globally recognized entity. CNSE's Albany NanoTech Complex is the most advanced research enterprise of its kind at any university in the world: a 5 billion, 800,000-square-foot complex that continuously attracts corporate partners from around the world, offers students a one-of-a-kind academic experience, and educates society on the implications of advances in nanotechnology. CNSE's Albany NanoTech houses the only fully-integrated 300mm wafer, computer chip pilot prototyping and demonstration line within 80,000 square feet of Class 1 capable cleanrooms. More than 2,500 scientists, researchers, engineers, students, and faculty work on site at CNSE's Albany NanoTech, with a network of global corporate partners that includes more than 250 leading nanotechnology companies, such as IBM, AMD, GlobalFoundries, SEMATECH, Toshiba, ASML, Applied Materials, Tokyo Electron, Vistec Lithography and Atotech, among many others.
A Mobile Phone Based Method to Assess Energy and Food Intake in Young Children: A Validation Study against the Doubly Labelled Water Method and 24 h Dietary Recalls.

PubMed

Delisle Nyström, Christine; Forsum, Elisabet; Henriksson, Hanna; Trolle-Lagerros, Ylva; Larsson, Christel; Maddison, Ralph; Timpka, Toomas; Löf, Marie

2016-01-15

Mobile phones are becoming important instruments for assessing diet and energy intake. We developed the Tool for Energy Balance in Children (TECH), which uses a mobile phone to assess energy and food intake in pre-school children. The aims of this study were: (a) to compare energy intake (EI) using TECH with total energy expenditure (TEE) measured via doubly labelled water (DLW); and (b) to compare intakes of fruits, vegetables, fruit juice, sweetened beverages, candy, ice cream, and bakery products using TECH with intakes acquired by 24 h dietary recalls. Participants were 39 healthy, Swedish children (5.5 ± 0.5 years) within the ongoing Mobile-based Intervention Intended to Stop Obesity in Preschoolers (MINISTOP) obesity prevention trial. Energy and food intakes were assessed during four days using TECH and 24 h telephone dietary recalls. Mean EI (TECH) was not statistically different from TEE (DLW) (5820 ± 820 kJ/24 h and 6040 ± 680 kJ/24 h, respectively). No significant differences in the average food intakes using TECH and 24 h dietary recalls were found. All food intakes were correlated between TECH and the 24 h dietary recalls (ρ = 0.665-0.896, p < 0.001). In conclusion, TECH accurately estimated the average intakes of energy and selected foods and thus has the potential to be a useful tool for dietary studies in pre-school children, for example obesity prevention trials.
AUV technology heads for new depths[Autonomous Underwater Vehicle

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayes, D.

2000-04-01

High-tech unmanned submarine technologies initially developed by the US Navy are being adapted for a new role to assist the oil and gas industry's shift into deeper waters. To address the problem of costly data acquisition and inaccurate survey data, C and C Technologies of Lafayette, La., has hired Kongsberg Simrad to construct the Hugin 3000 deepwater autonomous underwater vehicle (AUV). As the technology is applied to energy exploration and production advances to meet the deepwater challenges beyond the continental shelf, AUVs will be increasingly employed, it is believed. The paper describes the Hugin project, unexpected situations, the vehicle positionmore » tracking system, vehicle operation and real-time data quality control, real-time data monitoring and control, Hugin field experience, and pipe route surveying.« less
KSC-02pd1085

NASA Image and Video Library

2002-06-27

KENNEDY SPACE CENTER, FLA. -- United Space Alliance Chief Operating Officer Mike McCulley welcomes guests to the Landing Operations Facility and commissioning ceremony for the new Convoy Command Vehicle behind him. The new 40-foot vehicle is replacing a 15-year old model, and will be used following Shuttle landings as the prime vehicle to control critical communications between the orbiter, the crew and the Launch Control Center, to monitor the health of the Shuttle Orbiter systems and to direct convoy operations at the Shuttle Landing Facility. Upgrades and high-tech features incorporated into the design and development of this vehicle make it more reliable and efficient for the convoy crew. Seating capacity was increased from 4 to 12, and video recorders and television monitors were added to provide the convoy team with the maximum amount of visual information
The geomorphology of the Mississippi River chenier plain

USGS Publications Warehouse

Penland, S.; Suter, J.R.

1989-01-01

The chenier plain of the Mississippi River is a shore-parallel zone of alternating transgressive clastic ridges separated by progradational mudflats. The term chenier is derived from the cajun term chene for oak, the tree species that colonizes the crests of the higher ridges. The Mississippi River chenier plain stretches 200 km from Sabine Pass, Texas, to Southwest Point, Louisiana and ranges between 20 and 30 km wide, with elevations of 2-6 m. The timing and the process of formation could be re-evaluated in the light of new chronostratigraphic findings in the Mississippi River delta plain. The stratigraphic relationship between the Teche and Lafourche delta complexes and Ship Shoal offshore indicates that these delta complexes belong to different delta plains that developed at different sealevels. It appears that the Teche delta complex is associated with the late Holocene delta plain which developed 7000 to 3000 yrs B.P. when sealevel stood 5-6 m lower than present. A regional transgression occurred between approximately 3000 BP and 2500 yrs B.P., leading to the transgressive submergence of the late Holocene delta plain, producing the regional Teche shoreline. The timing of this transgression conforms to the age of the most landward ridge in the chenier plain, the Little Chenier-Little Pecan Island trend, which dates at about 2500 yrs B.P. This ridge trend was originally interpreted as representing the Teche delta complex switching event with the landward Holocene/Pleistocene contact representing the high stand shoreline. The implication of this new interpretation is that the Little Chenier-Little Pecan Island trend represents the high stand shoreline, a continuation of the Teche shoreline separating the late Holocene and Recent delta plains, and that the Holocene/Pleistocene contact represents the leading edge of the marshes transgressing onto the Prairie Terrace. Significant mudflat progradation seems to require a westerly position of the Mississippi River, but the numerous different forms and ages of cheniers do not correspond well to the timing of major delta complex switching. Progradation of the chenier plain appears to be associated with building of the Recent delta plain and not the Teche complex of the late Holocene delta plain. The occurrence of individual ridges appears to be primarily tied to delta lobe switching within the Lafourche complex and variations in sediment supply from local rivers. The recent development of the Atchafalaya delta complex to the west is the closest position of an active distributary to the chenier plain since sealevel stabilization; a new episode of rapid mudflat progradation is thus taking place. ?? 1989.
KSC-2012-3997

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – Students and their flight instructors from Florida Tech, or FIT, in Melbourne, tour the Vehicle Assembly Building and view space shuttle Atlantis at NASA’s Kennedy Space Center in Florida. The instructors and their students arrived at the Shuttle Landing Facility, or SLF, in Cherokee Warrior and Cessna 172S lightweight aircraft. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors also toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, and viewed the runway plaques marking wheels stop for each of the three space shuttles. Photo credit: NASA/Kim Shiflett
KSC-2012-3998

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – Students and their flight instructors from Florida Tech, or FIT, in Melbourne, tour the Vehicle Assembly Building and view space shuttle Atlantis at NASA’s Kennedy Space Center in Florida. The instructors and their students arrived at the Shuttle Landing Facility, or SLF, in Cherokee Warrior and Cessna 172S lightweight aircraft. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors also toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, and viewed the runway plaques marking wheels stop for each of the three space shuttles. Photo credit: NASA/Kim Shiflett
KSC-2012-3989

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – In a support building near NASA Kennedy Space Center’s Shuttle Landing Facility, or SLF, in Florida, students and their flight instructors from Florida Tech, FIT, in Melbourne listen to F104 Starfighters Director Rick Svetkoff. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett

KSC-2012-4001

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – At NASA Kennedy Space Center in Florida, flight instructors and their students from Florida Tech, or FIT, in Melbourne prepare to depart the Shuttle Landing Facility, or SLF, in Cherokee Warrior and Cessna 172S lightweight aircraft. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett
KSC-2012-4002

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – At NASA Kennedy Space Center in Florida, flight instructors and their students from Florida Tech, or FIT, in Melbourne prepare to depart the Shuttle Landing Facility, or SLF, in Cherokee Warrior and Cessna 172S lightweight aircraft. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett
KSC-2012-3985

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – Students and their flight instructors arrive at NASA Kennedy Space Center’s Shuttle Landing Facility, or SLF, in Florida in Cherokee Warrior and Cessna 172S lightweight aircraft from Florida Tech, or FIT, in Melbourne. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett
Tech Prep Compendium of Models. [Revised].

ERIC Educational Resources Information Center

Delaware Technical and Community Coll., Dover.

This publication discusses four models for technical preparation (tech prep): program organization; student progress; tech prep data collection and evaluation model; and school/community. The program organization model is divided into four sections. Section I, the business industry, and labor section, shows the flow from craft committee and…
Health Technologies State Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This "tech prep" state competency profile contains all the competencies required and recommended for entry-level employees in occupations in the health technologies cluster. Introductory materials include the following: descriptions of the different types of competencies (essential ones that must be included in all new tech prep programs…
NASA Tech Briefs, May 1999. Volume 23, No. 5

NASA Technical Reports Server (NTRS)

1999-01-01

Topics include: special coverage sections on sensors and composites and plastics, and sections on electronic components and systems, software, materials, mechanics, machinery and automation, bio-medical, physical sciences, book and reports, and a special section of Photonics Tech Briefs and Rapid Product Development Tech Briefs.
Planning a Successful Tech Show

ERIC Educational Resources Information Center

Nikirk, Martin

2011-01-01

Tech shows are a great way to introduce prospective students, parents, and local business and industry to a technology and engineering or career and technical education program. In addition to showcasing instructional programs, a tech show allows students to demonstrate their professionalism and skills, practice public presentations, and interact…
Thermographic Inspections Save Skins and Prevent Blackouts

NASA Technical Reports Server (NTRS)

2003-01-01

Scanning thermography involves heating a component s surface and subsequently measuring the surface temperature, using an infrared camera to identify structural defects such as corrosion and disbonding. It is a completely noninvasive and noncontacting process. Scans can detect defects in conventional metals and plastics, as well as in bonded aluminum composites, plastic- and resinbased composites, and laminated structures. The apparatus used for scanning is highly portable and can cover the surface of a test material up to six times faster than conventional thermography. NASA scientists affirm that the technology is an invaluable asset to the airlines, detecting potential defects that can cause structural failure.In 1996, ThermTech Services, Inc., of Stuart, Florida, approached NASA in an effort to evaluate the technology for application in the power and process industries, where corrosion is of serious concern. ThermTech Services proceeded to develop the application for inspecting boiler waterwall tubing at fossil-fueled electric-generating stations. In 1999, ThermTech purchased the rights to NASA s patented technology and developed the specialized equipment required to apply the inspecting method to power plant components. The ThermTech robotic system using NASA technology has proved to be extremely successful and cost effective in performing detailed inspections of large structures such as boiler waterwalls and aboveground chemical storage tanks. It is capable of inspecting a waterwall, tank-wall, or other large surfaces at a rate of approximately 10 square feet per minute or faster.
Adult Retraining in Canada: Some Issues.

ERIC Educational Resources Information Center

Kim, Ki Su

Canada has traditionally supported a high level of unemployment benefits and retraining programs for its displaced workers. From the 1960s onward, legislation and attitudes in the business community have been geared toward retraining of workers for high-tech workplaces and the replacement of low-skill jobs with high-skill jobs. With increased…
High Tech Training at Arthur Andersen and Co.

ERIC Educational Resources Information Center

Dennis, Verl E.

1984-01-01

Discusses Arthur Andersen and Company's reasons for using high technology in job training, including its ability to improve productivity, provide training on demand, reduce training costs, and keep educational quality consistent. A Life Cycle Model which is used to integrate high technology into this accounting company's educational programs is…
High Tech. High Technology in Vocational Education. Training Programs for Emerging Occupations.

ERIC Educational Resources Information Center

Rodenstein, Judith, Ed.

This publication represents the collaborative efforts of vocational educators who are involved in the planning and teaching of high technology training programs. It contains a series of reports and profiles which illustrate the diversity of high technology programs in vocational education institutions and the variety of approaches that can be used…
Low-Tech Energy Conservation for Schools.

ERIC Educational Resources Information Center

Stein, Benjamin

The American Institute of Architects National Committee on Architecture for Education presents this guide which addresses methods of energy conservation in school buildings with simple design, construction, and equipment-control technology so that trained and creative people can take over functions normally done by machinery and automated…
Delivery of gene biotechnologies to plants: Pathogen and pest control

USDA-ARS?s Scientific Manuscript database

Treatment of oligonucleotides to plants for host delivered suppression of microbes and insect pests of citrus was successful. FANA_ASO, (2'-deoxy-2'-fluoro-D- arabinonucleic acid)_( antisense oligonucleotides- AUM LifeTech) designed to: Asian citrus psyllid; Citrus plant bacterial pathogen of citru...
A Database Management System for Interlibrary Loan.

ERIC Educational Resources Information Center

Chang, Amy

1990-01-01

Discusses the increasing complexity of dealing with interlibrary loan requests and describes a database management system for interlibrary loans used at Texas Tech University. System functions are described, including file control, records maintenance, and report generation, and the impact on staff productivity is discussed. (CLB)
Heat Recovery System

NASA Technical Reports Server (NTRS)

1984-01-01

Ball Metal's design of ducting and controls for series of roof top heat exchangers was inspired by Tech Briefs. Heat exchangers are installed on eight press and coating lines used to decorate sheet metal. The heat recovery system provides an estimated energy savings of more than $250,000 per year.
Evaluation of fly ash quality control tools : tech summary.

DOT National Transportation Integrated Search

2010-06-01

Many entities currently use fl y ash in portland cement concrete (PCC) pavements and structures. Although : the body of knowledge is great concerning the use of fl y ash, several projects per year are subject to poor : performance where fl y ash is n...
Bayou Corne sinkhole : control measurements of State Highway 70 in Assumption Parish, Louisiana, tech summary.

DOT National Transportation Integrated Search

2014-01-01

The sinkhole located in Assumption Parish, Louisiana, threatens the stability of Highway 70, a state maintained route. In order to : mitigate the potential damaging e ects of the sinkhole on this infrastructure, the Louisiana Department of Transpo...
Strategic directions and mechanisms in technology transfer

NASA Technical Reports Server (NTRS)

Mackin, Robert

1992-01-01

An outline summarizing the Working Panel discussion related to strategic directions for technology transfer is presented. Specific topics addressed include measuring success, management of technology, innovation and experimentation in the tech transfer process, integration of tech transfer into R&D planning, institutionalization of tech transfer, and policy/legislative resources.
Promoting Tech Schools within Your Community

ERIC Educational Resources Information Center

Nikirk, Martin

2010-01-01

This article describes a number of promotional events and practices that the author's school engages in. The author hopes that his school's experiences will serve as an inspiration and useful model for other "Tech Directions" readers. There are many methods for successfully promoting one's tech program. Two key strategies are: (1) Connect in…
Tech-Prep Competency Profiles within the Business/Computer Technologies.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document, which is designed for educators throughout Ohio who are involved in planning and/or delivering tech prep programs within the business/computer technologies cluster, discusses and presents tech prep competency profiles (TCPs) for 12 business/computer technology occupations. The first part of the document contains the following:…

75 FR 76036 - American Axle & Manufacturing Detroit Manufacturing Complex Holbrook Avenue and Saint Aubin...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-07

... From Paint Tech International Detroit, MI; Amended Certification Regarding Eligibility To Apply for... firm. New information revealed that workers leased from Paint Tech International were employed on-site... certification to include workers leased from Paint Tech International working on-site at the Detroit, Michigan...
School-to-Work Apprenticeship. Project Manual 1993-1994.

ERIC Educational Resources Information Center

Lee Coll., Baytown, TX.

With Perkins tech prep funds, Lee College (Baytown, Texas), working with the Gulf Coast Tech Prep Consortium and the Goose Creek Consolidated Independent School District, developed a school-to-work apprenticeship model for tech prep programs. An advisory committe provided guidance in identifying targeted apprenticeable jobs, program content, and…
Museum in a School (reaching the unreachable audience). Final report, February 2, 1993--December 14, 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Diaz, O.

SciTech, an interactive science and technology center located 45 miles west of Chicago, is dedicated to providing hands-on and minds-on experiences that explore the spectrum of science and mathematics. SciTech opened at its present location during the summer of 1990 in Aurora, a changing community with a large minority population. Since then, SciTech has received over 331,000 visitors from the entire Chicago metropolitan area. There are now more than 250 exhibits housed in the museum. SciTech has grown quickly in part due to the strong volunteer support from the research and development corridor population it serves, as well as throughmore » international ties. SciTech has become known as an innovative force in the science museum community for its original exhibits and unique youth and school programs. SciTech`s traveling outreach program, ``Museum in a School,`` has served over 391 public and private schools in 111 districts in the Chicago metropolitan area, and has reached over 3,099 teachers and 98,837 students throughout its history. This program serves a wide variety of students, including bilingual, economically depressed, and learning impaired. SciTech is concerned with every American`s need for increasing basic science literacy.« less
The Computerization of Career Services: Critical Issues To Consider.

ERIC Educational Resources Information Center

Davidson, M. Meghan

2001-01-01

Looks at the technological changes in the delivery of career services in colleges and universities and examines seven critical issues: appropriate web-based services, student diversity, ethical responsibilities, high-tech and high-touch, holistic approach, staffing and financial considerations, and outcomes. (JOW)
Employee Retention and Performance Improvement in High-Tech Companies.

ERIC Educational Resources Information Center

Ware, B. Lynn

2001-01-01

Considers the benefits of employee retention and performance improvement in high technology, new economy companies. Discusses attracting and retaining top talent in information technology companies; targeted recruiting and hiring; employee achievement; learning and professional growth; recognition; nurturing careers; team collaboration; the TALENT…
Investigation of high-strength bolt-tightening verification techniques : tech transfer summary.

DOT National Transportation Integrated Search

2016-03-01

The primary objective of this project was to explore the current state-of-practice and the state-of-the-art techniques for high-strength bolt tightening and verification in structural steel connections. This project was completed so that insight coul...
Embedded system based on PWM control of hydrogen generator with SEPIC converter

NASA Astrophysics Data System (ADS)

Fall, Cheikh; Setiawan, Eko; Habibi, Muhammad Afnan; Hodaka, Ichijo

2017-09-01

The objective of this paper is to design and to produce a micro electrical plant system based on fuel cell for teaching material-embedded systems in technical vocational training center. Based on this, the student can experience generating hydrogen by fuel cells, controlling the rate of hydrogen generation by the duty ration of single-ended primary-inductor converter(SEPIC), drawing the curve rate of hydrogen to duty ratio, generating electrical power by using hydrogen, and calculating the fuel cell efficiency when it is used as electrical energy generator. This project is of great importance insofar as students will need to acquire several skills to be able to realize it such as continuous DC DC conversion and the scientific concept behind the converter, the regulation of systems with integral proportional controllers, the installation of photovoltaic cells, the use of high-tech sensors, microcontroller programming, object-oriented programming, mastery of the fuel cell syste
Compact, Low-Profile Power Converters: Highly-Laminated, High-Saturation-Flux-Density, Magnetic Cores for On-Chip Inductors in Power Converter Applications

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-09-01

ADEPT Project: Georgia Tech is creating compact, low-profile power adapters and power bricks using materials and tools adapted from other industries and from grid-scale power applications. Adapters and bricks convert electrical energy into useable power for many types of electronic devices, including laptop computers and mobile phones. These converters are often called wall warts because they are big, bulky, and sometimes cover up an adjacent wall socket that could be used to power another electronic device. The magnetic components traditionally used to make adapters and bricks have reached their limits; they can't be made any smaller without sacrificing performance. Georgiamore » Tech is taking a cue from grid-scale power converters that use iron alloys as magnetic cores. These low-cost alloys can handle more power than other materials, but the iron must be stacked in insulated plates to maximize energy efficiency. In order to create compact, low-profile power adapters and bricks, these stacked iron plates must be extremely thin-only hundreds of nanometers in thickness, in fact. To make plates this thin, Georgia Tech is using manufacturing tools used in microelectromechanics and other small-scale industries.« less
Current practices for evaluation of resonance disorders in North America.

PubMed

Stelck, Elizabeth Huebert; Boliek, Carol A; Hagler, Paul H; Rieger, Jana M

2011-02-01

Improving treatment outcomes for people with resonance problems (due to velopharyngeal disorders) is a priority for many speech-language pathologists (SLPs), but there exists a limited understanding of the practices SLPs are using to assess and monitor therapeutic effects in this population. The current study was designed to answer the following questions: (1) What are current clinical practices versus best practices for assessing resonance disorders, tracking therapeutic effects, and determining discharge criteria? (2) What assessment practices would SLPs prefer to use with clients who have resonance disorders? (3) What are barriers to SLPs' use of best practices? and (4) What effects do SLP demographics have on clinical practices? Thirty-eight SLPs, specializing in the treatment of resonance disorders, participated in the study. Responses were compared with best practice recommendations derived from the literature. Most clinicians were using low-tech assessment tools, often because they lacked access to high-tech tools. Demographics and training did not affect clinical assessment practices. There is a need to increase the availability of high-tech assessment tools to SLPs practicing in the area of resonance disorders, as consistent use of sophisticated assessment devices would exemplify contemporary thinking about the transfer of knowledge to practice in this area. © Thieme Medical Publishers.
Types of architectural structures and the use of smart materials

NASA Astrophysics Data System (ADS)

Tavşan, Cengiz; Sipahi, Serkan

2017-07-01

The developments in technology following the industrial revolution had their share of impact on both construction techniques, and material technologies. The change in the materials used by the construction industry brought along numerous innovations, which, in turn, took on an autonomous trend of development given the rise of nano-tech materials. Today, nano-tech materials are used extensively in numerous construction categories. Nano-tech materials, in general, are characterized by their reactionary nature, with the intent of repeating the reactions again and again under certain conditions. That is why nano-tech materials are often called smart materials. In construction industry, smart materials are categorized under 4 major perspectives: Shape-shifting smart materials, power generating smart materials, self-maintenance smart materials, and smart materials providing a high level of insulation. In architecture, various categories of construction often tend to exhibit their own approaches to design, materials, and construction techniques. This is a direct consequence of the need for different solutions for different functions. In this context, the use of technological materials should lead to the use of a set of smart materials for a given category of structures, while another category utilizes yet another set. In the present study, the smart materials used in specific categories of structures were reviewed with reference to nano-tech practices implemented in Europe, with a view to try and reveal the changes in the use of smart materials with reference to categories of structures. The study entails a discussion to test the hypothesis that nano-tech materials vary with reference to structure categories, on the basis of 18 examples from various structure categories, built by the construction firms with the highest level of potential in terms of doing business in Europe. The study comprises 3 major sections: The first section reiterates what the literature has to say about smart materials; the second discusses the types and characteristics of smart materials over the tables detailing their utilization and functions in the structures included in the set of examples. The final section of the study, on the other hand, elaborates on the findings, discussing them with reference to the types of structures.
Impact of newer self-monitoring technology and brief phone-based intervention on weight loss: A randomized pilot study.

PubMed

Ross, Kathryn M; Wing, Rena R

2016-08-01

Despite the proliferation of newer self-monitoring technology (e.g., activity monitors and smartphone apps), their impact on weight loss outside of structured in-person behavioral intervention is unknown. A randomized, controlled pilot study was conducted to examine efficacy of self-monitoring technology, with and without phone-based intervention, on 6-month weight loss in adults with overweight and obesity. Eighty participants were randomized to receive standard self-monitoring tools (ST, n = 26), technology-based self-monitoring tools (TECH, n = 27), or technology-based tools combined with phone-based intervention (TECH + PHONE, n = 27). All participants attended one introductory weight loss session and completed assessments at baseline, 3 months, and 6 months. Weight loss from baseline to 6 months differed significantly between groups P = 0.042; there was a trend for TECH + PHONE (-6.4 ± 1.2 kg) to lose more weight than ST (-1.3 ± 1.2 kg); weight loss in TECH (-4.1 ± 1.4 kg) was between ST and TECH + PHONE. Fewer ST (15%) achieved ≥5% weight losses compared with TECH and TECH + PHONE (44%), P = 0.039. Adherence to self-monitoring caloric intake was higher in TECH + PHONE than TECH or ST, Ps < 0.05. These results suggest use of newer self-monitoring technology plus brief phone-based intervention improves adherence and weight loss compared with traditional self-monitoring tools. Further research should determine cost-effectiveness of adding phone-based intervention when providing self-monitoring technology. © 2016 The Obesity Society.
Treatment of men with high-risk prostate cancer based on race, insurance coverage, and access to advanced technology.

PubMed

Gerhard, Robert Steven; Patil, Dattatraya; Liu, Yuan; Ogan, Kenneth; Alemozaffar, Mehrdad; Jani, Ashesh B; Kucuk, Omer N; Master, Viraj A; Gillespie, Theresa W; Filson, Christopher P

2017-05-01

We characterized factors related to nondefinitive management (NDM) of patients with high-risk prostate cancer and assessed impact from race, insurance status, and facility-level volume of technologically advanced prostate cancer treatments (i.e., intensity-modulated radiation therapy, robotic-assisted laparoscopic radical prostatectomy) on this outcome. We identified men with high-risk localized prostate cancer (based on D׳Amico criteria) in the National Cancer Database (2010-2012). Primary outcome was NDM (i.e., delayed/no treatment with prostatectomy/radiation therapy or androgen-deprivation monotherapy). Treating facilities were classified by quartiles of proportions of patients treated with advanced technology. Multivariable regression estimated odds of primary outcome based on race, insurance status, and facility-level technology use, and evaluated for interactions between these covariates. Among 60,300 patients, 9,265 (15.4%) received NDM. This was more common among non-White men (P<0.001), Medicaid/uninsured patients (P<0.001), and those managed at facilities in the lowest quartile of technology use (25.1% vs. 11.0% highest, P<0.001). Though NDM was common among non-White men with Medicaid/no insurance treated at low-technology centers (43% vs. 10% White, private/Medicare, high-tech facility; adjusted odds ratios = 7.18, P<0.001), this was less likely if this group was managed at a high-tech hospital (22% vs. 43% low-tech, P<0.001). Technology use at a facility correlates with high-quality prostate cancer care and is associated with diminished disparities based on insurance status and patient race. More research is required to characterize other facility-level factors explaining these findings. Published by Elsevier Inc.
Identification of ground motion features for high-tech facility under far field seismic waves using wavelet packet transform

NASA Astrophysics Data System (ADS)

Huang, Shieh-Kung; Loh, Chin-Hsiung; Chen, Chin-Tsun

2016-04-01

Seismic records collected from earthquake with large magnitude and far distance may contain long period seismic waves which have small amplitude but with dominant period up to 10 sec. For a general situation, the long period seismic waves will not endanger the safety of the structural system or cause any uncomfortable for human activity. On the contrary, for those far distant earthquakes, this type of seismic waves may cause a glitch or, furthermore, breakdown to some important equipments/facilities (such as the high-precision facilities in high-tech Fab) and eventually damage the interests of company if the amplitude becomes significant. The previous study showed that the ground motion features such as time-variant dominant frequencies extracted using moving window singular spectrum analysis (MWSSA) and amplitude characteristics of long-period waves identified from slope change of ground motion Arias Intensity can efficiently indicate the damage severity to the high-precision facilities. However, embedding a large hankel matrix to extract long period seismic waves make the MWSSA become a time-consumed process. In this study, the seismic ground motion data collected from broadband seismometer network located in Taiwan were used (with epicenter distance over 1000 km). To monitor the significant long-period waves, the low frequency components of these seismic ground motion data are extracted using wavelet packet transform (WPT) to obtain wavelet coefficients and the wavelet entropy of coefficients are used to identify the amplitude characteristics of long-period waves. The proposed method is a timesaving process compared to MWSSA and can be easily implemented for real-time detection. Comparison and discussion on this method among these different seismic events and the damage severity to the high-precision facilities in high-tech Fab is made.
Treatment of men with high-risk prostate cancer based on race, insurance coverage, and access to advanced technology

PubMed Central

Gerhard, R. Steven; Patil, Dattatraya; Liu, Yuan; Ogan, Kenneth; Alemozaffar, Mehrdad; Jani, Ashesh B.; Kucuk, Omer N.; Master, Viraj A.; Gillespie, Theresa W.; Filson, Christopher P.

2017-01-01

PURPOSE We characterized factors related to non-definitive management of high-risk prostate cancer patients, and assessed impact from race, insurance status, and facility-level volume of technologically-advanced prostate cancer treatments (i.e. intensity-modulated radiation therapy, robotic-assisted laparoscopic radical prostatectomy) on this outcome. METHODS We identified men with high-risk localized prostate cancer (based on D’Amico criteria) in the National Cancer Data Base (2010–2012). Primary outcome was non-definitive management (i.e., delayed/no treatment with prostatectomy/radiation therapy or androgen deprivation therapy monotherapy). Treating facilities were classified by quartiles of proportions of patients treated with advanced technology. Multivariable regression estimated odds of primary outcome based on race, insurance status, and facility-level technology use, and evaluated for interactions between these covariates. RESULTS Among 60,300 patients, 9265 (15.4%) received non-definitive management. This was more common among non-White men (p<0.001), Medicaid/uninsured patients (p<0.001), and those managed at facilities in the lowest quartile of technology use (25.1% vs 11.0% highest, p<0.001). Though non-definitive management was common among non-White men with Medicaid/no insurance treated at low-technology centers (43% vs 10% White, private/Medicare, high-tech facility; adjusted OR 7.18, p<0.001), this was less likely if this group was managed at a high-tech hospital (22% vs 43% low-tech, p<0.001). CONCLUSIONS Technology-use at a facility correlates with high-quality prostate cancer care, and is associated with diminished disparities based on insurance status and patient race. More research is required to characterize other facility-level factors explaining these findings. PMID:28089387
Development of an Ultra-Low-Cost Solar Water Heater: Cooperative Research and Development Final Report, CRADA Number CRD-12-487

DOE Office of Scientific and Technical Information (OSTI.GOV)

Merrigan, Tim

2016-02-17

NREL and RhoTech will collaborate to bring long-lived, ultra-low-cost, high-performance solar water heaters (SWH) to market readiness. An existing RhoTech design uses seam-welded polymer thin films to make an unglazed thermosiphon, and this design will be modified to improve durability through ultraviolet and overheat protection, and to improve performance by adding a glazing to the collector. Two generations of the new glazed systems will be tested in the field, resulting in a robust market-ready SWH design that can be installed for under $1,000 without rebates.
High-Tech JOBS Act

THOMAS, 112th Congress

Sen. Rockefeller, John D., IV [D-WV

2011-07-06

Senate - 07/06/2011 Read twice and referred to the Committee on Health, Education, Labor, and Pensions. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:
Does the high–tech industry consistently reduce CO{sub 2} emissions? Results from nonparametric additive regression model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, Bin; Research Center of Applied Statistics, Jiangxi University of Finance and Economics, Nanchang, Jiangxi 330013; Lin, Boqiang, E-mail: bqlin@xmu.edu.cn

China is currently the world's largest carbon dioxide (CO{sub 2}) emitter. Moreover, total energy consumption and CO{sub 2} emissions in China will continue to increase due to the rapid growth of industrialization and urbanization. Therefore, vigorously developing the high–tech industry becomes an inevitable choice to reduce CO{sub 2} emissions at the moment or in the future. However, ignoring the existing nonlinear links between economic variables, most scholars use traditional linear models to explore the impact of the high–tech industry on CO{sub 2} emissions from an aggregate perspective. Few studies have focused on nonlinear relationships and regional differences in China. Basedmore » on panel data of 1998–2014, this study uses the nonparametric additive regression model to explore the nonlinear effect of the high–tech industry from a regional perspective. The estimated results show that the residual sum of squares (SSR) of the nonparametric additive regression model in the eastern, central and western regions are 0.693, 0.054 and 0.085 respectively, which are much less those that of the traditional linear regression model (3.158, 4.227 and 7.196). This verifies that the nonparametric additive regression model has a better fitting effect. Specifically, the high–tech industry produces an inverted “U–shaped” nonlinear impact on CO{sub 2} emissions in the eastern region, but a positive “U–shaped” nonlinear effect in the central and western regions. Therefore, the nonlinear impact of the high–tech industry on CO{sub 2} emissions in the three regions should be given adequate attention in developing effective abatement policies. - Highlights: • The nonlinear effect of the high–tech industry on CO{sub 2} emissions was investigated. • The high–tech industry yields an inverted “U–shaped” effect in the eastern region. • The high–tech industry has a positive “U–shaped” nonlinear effect in other regions. • The linear impact of the high–tech industry in the eastern region is the strongest.« less
A Mobile Phone Based Method to Assess Energy and Food Intake in Young Children: A Validation Study against the Doubly Labelled Water Method and 24 h Dietary Recalls

PubMed Central

Delisle Nyström, Christine; Forsum, Elisabet; Henriksson, Hanna; Trolle-Lagerros, Ylva; Larsson, Christel; Maddison, Ralph; Timpka, Toomas; Löf, Marie

2016-01-01

Mobile phones are becoming important instruments for assessing diet and energy intake. We developed the Tool for Energy Balance in Children (TECH), which uses a mobile phone to assess energy and food intake in pre-school children. The aims of this study were: (a) to compare energy intake (EI) using TECH with total energy expenditure (TEE) measured via doubly labelled water (DLW); and (b) to compare intakes of fruits, vegetables, fruit juice, sweetened beverages, candy, ice cream, and bakery products using TECH with intakes acquired by 24 h dietary recalls. Participants were 39 healthy, Swedish children (5.5 ± 0.5 years) within the ongoing Mobile-based Intervention Intended to Stop Obesity in Preschoolers (MINISTOP) obesity prevention trial. Energy and food intakes were assessed during four days using TECH and 24 h telephone dietary recalls. Mean EI (TECH) was not statistically different from TEE (DLW) (5820 ± 820 kJ/24 h and 6040 ± 680kJ/24 h, respectively). No significant differences in the average food intakes using TECH and 24 h dietary recalls were found. All food intakes were correlated between TECH and the 24 h dietary recalls (ρ = 0.665–0.896, p < 0.001). In conclusion, TECH accurately estimated the average intakes of energy and selected foods and thus has the potential to be a useful tool for dietary studies in pre-school children, for example obesity prevention trials. PMID:26784226
Virginia Tech Researchers Study Effects of Shootings on Their Campus

ERIC Educational Resources Information Center

Gravois, John

2008-01-01

This article reports how researchers at Virginia Tech, working in a variety of disciplines, are studying the long-term effects of the campus killings 10 months ago. After the killings, administrators at Virginia Tech realized that their normal institutional-review process for research proposals was not sufficient to deal with the likely onslaught…
A Survey of Perceptions of the Virginia Tech Tragedy

ERIC Educational Resources Information Center

Fallahi, Carolyn R.; Austad, Carol Shaw; Fallon, Marianne; Leishman, Lisa

2009-01-01

The recent shootings at the Virginia Polytechnic Institute (Virginia Tech) shocked the nation and brought violence on college campuses to the forefront of the nation's attention. We surveyed college students and faculty/staff three weeks after the incident about their perceptions of the Virginia Tech shooting, subsequent media exposure, and school…

Tech Prep SCANS Lesson Development. Region 10 Tech Prep.

ERIC Educational Resources Information Center

Region 10 Tech Prep Consortium, Bloomington, IN.

This document contains 50 applications-based lessons developed during the 1993-94 school year as part of the Indiana Region 10 Tech Prep Project. The lessons were developed by 91 secondary and postsecondary educators and are modeled around the SCANS (Secretary's Commission on Achieving Necessary Skills) competencies. The applications-based lessons…
Soft Soil Tire Model Development and Experimental Testing

DTIC Science & Technology

2012-09-01

Sandu 1 , Mr. Eduardo Pinto 2 , Mr. Scott Naranjo 3 , Dr. Paramsothy Jayakumar 4 , Dr. Brant Ross 5 1Virginia Tech, 2Virginia Tech, 3Virginia Tech...W56HZV-04-2-0001 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Corina Sandu; Eduardo Pinto; Scott Naranjo; Paramsothy Jayakumar ; Brant Ross
TechTrends 2010-2015: A Content Analysis

ERIC Educational Resources Information Center

Stauffer, Eric

2017-01-01

This study is a content analysis of articles published within the journal "TechTrends" from 2000 to 2015. The study reveals that the publication "TechTrends" has increased the overall number of peer reviewed original papers over the last 6 years. The author describes the proportion of these original papers per volume and…
Quality control/quality assurance testing for joint density and segregation of asphalt mixtures : tech transfer summary.

DOT National Transportation Integrated Search

2013-04-01

A longitudinal joint is the interface between two adjacent and parallel hot-mix asphalt (HMA) mats. Inadequate joint construction can lead to a location where water can penetrate the pavement layers and reduce the structural support of the underlying...
Optimization of Grade 100 High-Performance Steel Butt Welds [Tech Brief

DOT National Transportation Integrated Search

2013-11-01

In the development of the high performance steels (HPS) grades, three advisory groups were formed to oversee and guide the development of the steels in terms of their design, welding, and corrosion aspects. One of the aspects considered by the Weldin...
Case studies suggest practical ways to increase the visibility of high-visibility enforcement programs : traffic tech.

DOT National Transportation Integrated Search

2013-08-01

High-visibility enforcement (HVE) models are an effective : strategy to reduce impaired driving. They work by increasing : drivers perceived risk of being stopped and arrested by : law enforcement if they choose to drive while impaired by : alcoho...
Society for College Science Teachers: High Technology.

ERIC Educational Resources Information Center

Menefee, Robert

1983-01-01

Presents findings of a study group on high technology charged with determining a definition, assessing current educational response, and examining implications for the future. Topics addressed include: super-techs; computer-aided design/computer-aided manufacture (CAD/CAM); structural unemployment; a two-plus-two curriculum; and educational…
Integrated Power Adapter: Isolated Converter with Integrated Passives and Low Material Stress

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2010-09-01

ADEPT Project: CPES at Virginia Tech is developing an extremely efficient power converter that could be used in power adapters for small, lightweight laptops and other types of mobile electronic devices. Power adapters convert electrical energy into useable power for an electronic device, and they currently waste a lot of energy when they are plugged into an outlet to power up. CPES at Virginia Tech is integrating high-density capacitors, new magnetic materials, high-frequency integrated circuits, and a constant-flux transformer to create its efficient power converter. The high-density capacitors enable the power adapter to store more energy. The new magnetic materialsmore » also increase energy storage, and they can be precisely dispensed using a low-cost ink-jet printer which keeps costs down. The high-frequency integrated circuits can handle more power, and they can handle it more efficiently. And, the constant-flux transformer processes a consistent flow of electrical current, which makes the converter more efficient.« less
Design Directions: Looking for What Is 'Missing'

ERIC Educational Resources Information Center

AIA Journal, 1978

1978-01-01

In modern architecture of the 1970s, esthetic choices that appear regularly are "historicism,""high-tech," and "slick style." The Brooklyn Children's Museum is one of the many examples photographed. (Author/MLF)
Technology | Frederick National Laboratory for Cancer Research

Cancer.gov

The Frederick National Laboratory develops and applies advanced, next-generation technologies to solve basic and applied problems in the biomedical sciences, and serves as a national resource of shared high-tech facilities.
Is the Writing on the Wall for Tabletops?

NASA Astrophysics Data System (ADS)

Pantidi, Nadia; Rogers, Yvonne; Robinson, Hugh

We describe an ethnographic study that explores how low tech and new tech surfaces support participation and collaboration during a workshop breakout session. The low tech surfaces were post-it notes and large sheets of paper. The new tech surfaces were writeable walls and a multi-touch tabletop. Four groups used the different surfaces during three phases: i) brief presentation of position papers and discussion of themes, ii) the creation of a group presentation and iii) a report back session. Participation and collaboration varied depending on the physical, technological and social factors at play when using the different surfaces. We discuss why this is the case, noting how new shareable surfaces may need to be constrained to invite participation in ways that are simply taken for granted because of their familiarity when using low tech materials.
Re-Active Passive devices for control of noise transmission through a panel

NASA Astrophysics Data System (ADS)

Carneal, James P.; Giovanardi, Marco; Fuller, Chris R.; Palumbo, Dan

2008-01-01

Re-Active Passive devices have been developed to control low-frequency (<1000 Hz) noise transmission through a panel. These devices use a combination of active, re-active, and passive technologies packaged into a single unit to control a broad frequency range utilizing the strength of each technology over its best suited frequency range. The Re-Active Passive device uses passive constrained layer damping to cover relatively high-frequency range (>150 Hz), reactive distributed vibration absorber to cover the medium-frequency range (50-200 Hz), and active control for controlling low frequencies (<150 Hz). The actuator was applied to control noise transmission through a panel mounted in the Transmission Loss Test Facility at Virginia Tech. Experimental results are presented for the bare panel, and combinations of passive treatment, reactive treatment, and active control. Results indicate that three Re-Active Passive devices were able to increase the overall broadband (15-1000 Hz) transmission loss by 9.4 dB. These three devices added a total of 285 g to the panel mass of 6.0 kg, or approximately 5%, not including control electronics.
NASA Tech Briefs, April 1995. Volume 19, No. 4

NASA Technical Reports Server (NTRS)

1995-01-01

This issue of the NASA Tech Briefs has a special focus section on video and imaging, a feature on the NASA invention of the year, and a resource report on the Dryden Flight Research Center. The issue also contains articles on electronic components and circuits, electronic systems, physical sciences, materials, computer programs, mechanics, machinery, manufacturing/fabrication, mathematics and information sciences and life sciences. In addition to the standard articles in the NASA Tech brief, this contains a supplement entitled "Laser Tech Briefs" which features an article on the National Ignition Facility, and other articles on the use of Lasers.
Final Report: High Energy Physics at the Energy Frontier at Louisiana Tech

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sawyer, Lee; Wobisch, Markus; Greenwood, Zeno D.

The Louisiana Tech University High Energy Physics group has developed a research program aimed at experimentally testing the Standard Model of particle physics and searching for new phenomena through a focused set of analyses in collaboration with the ATLAS experiment at the Large Hadron Collider (LHC) at the CERN laboratory in Geneva. This research program includes involvement in the current operation and maintenance of the ATLAS experiment and full involvement in Phase 1 and Phase 2 upgrades in preparation for future high luminosity (HL-LHC) operation of the LHC. Our focus is solely on the ATLAS experiment at the LHC, withmore » some related detector development and software efforts. We have established important service roles on ATLAS in five major areas: Triggers, especially jet triggers; Data Quality monitoring; grid computing; GPU applications for upgrades; and radiation testing for upgrades. Our physics research is focused on multijet measurements and top quark physics in final states containing tau leptons, which we propose to extend into related searches for new phenomena. Focusing on closely related topics in the jet and top analyses and coordinating these analyses in our group has led to high efficiency and increased visibility inside the ATLAS collaboration and beyond. Based on our work in the DØ experiment in Run II of the Fermilab Tevatron Collider, Louisiana Tech has developed a reputation as one of the leading institutions pursuing jet physics studies. Currently we are applying this expertise to the ATLAS experiment, with several multijet analyses in progress.« less
Active Control of Inlet Noise on the JT15D Turbofan Engine

NASA Technical Reports Server (NTRS)

Smith, Jerome P.; Hutcheson, Florence V.; Burdisso, Ricardo A.; Fuller, Chris R.

1999-01-01

This report presents the key results obtained by the Vibration and Acoustics Laboratories at Virginia Tech over the year from November 1997 to December 1998 on the Active Noise Control of Turbofan Engines research project funded by NASA Langley Research Center. The concept of implementing active noise control techniques with fuselage-mounted error sensors is investigated both analytically and experimentally. The analytical part of the project involves the continued development of an advanced modeling technique to provide prediction and design guidelines for application of active noise control techniques to large, realistic high bypass engines of the type on which active control methods are expected to be applied. Results from the advanced analytical model are presented that show the effectiveness of the control strategies, and the analytical results presented for fuselage error sensors show good agreement with the experimentally observed results and provide additional insight into the control phenomena. Additional analytical results are presented for active noise control used in conjunction with a wavenumber sensing technique. The experimental work is carried out on a running JT15D turbofan jet engine in a test stand at Virginia Tech. The control strategy used in these tests was the feedforward Filtered-X LMS algorithm. The control inputs were supplied by single and multiple circumferential arrays of acoustic sources equipped with neodymium iron cobalt magnets mounted upstream of the fan. The reference signal was obtained from an inlet mounted eddy current probe. The error signals were obtained from a number of pressure transducers flush-mounted in a simulated fuselage section mounted in the engine test cell. The active control methods are investigated when implemented with the control sources embedded within the acoustically absorptive material on a passively-lined inlet. The experimental results show that the combination of active control techniques with fuselage-mounted error sensors and passive control techniques is an effective means of reducing radiated noise from turbofan engines. Strategic selection of the location of the error transducers is shown to be effective for reducing the radiation towards particular directions in the farfield. An analytical model is used to predict the behavior of the control system and to guide the experimental design configurations, and the analytical results presented show good agreement with the experimentally observed results.
Demystifying High Technology. Occasional Paper No. 97.

ERIC Educational Resources Information Center

Rumberger, Russell

Two myths about high technology are that it will be the primary source of new jobs and that it will vastly upgrade the skill requirements of jobs. Evidence does not support these myths. Most new jobs will not be in high tech fields, and technology will reduce the skill requirements. The Bureau of Labor Statistics predicts that high tech…
NASA Tech Briefs, December 1993. Volume 17, No. 12

NASA Technical Reports Server (NTRS)

1993-01-01

Topics covered include: High-Performance Computing; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports.
Determinants of R and D Compensation Strategies in the High Tech Industry.

ERIC Educational Resources Information Center

Balkin, David B.; Gomez-Mejia, Luis R.

1984-01-01

Interviewed managers in high technology and traditional firms (N=105) to explore the determinants of research and development compensation practices and policies in high technology firms. Results indicated that sales volume, stage in the product life cycle, profitabilty, and turnover are predictors of the method and magnitude of financial rewards.…
High-Fidelity Simulation Meets Athletic Training Education: An Innovative Collaborative Teaching Project

ERIC Educational Resources Information Center

Palmer, Elizabeth; Edwards, Taylor; Racchini, James

2014-01-01

High-fidelity simulation is frequently used in nursing education to provide students with simulated experiences prior to and throughout clinical coursework that involves direct patient care. These high-tech exercises take advantage of the benefits of a standardized patient or mock patient encounter, while eliminating some of the drawbacks…
Development of quality standards for inclusion of high recycled asphalt pavement content in asphalt mixtures - phase II, [tech brief].

DOT National Transportation Integrated Search

2015-03-01

The objective of this research is to 1) build a test section utilizing HMA : mix designs with up to 40% RAP materials, 2) evaluate the moisture : sensitivity of High-RAP mixtures, 3) characterize the low-temperature : fracture behavior of High-RAP mi...

Libraries as a venue for exciting education technology, both high tech and low

NASA Astrophysics Data System (ADS)

Harold, J. B.; Dusenbery, P.; Holland, A.

2016-12-01

Public libraries provide a broad range of possibilities for reaching diverse audiences with NASA and STEM related content and activities, from hands-on activities, to interactive kiosks incorporating science based games, simulations, and real-time data. NCIL/SSI has been developing STEM-based exhibits and program activities for public libraries since 2007, and is currently managing 7 national tours in partnership with the American Library Association and other organizations. Past and current exhibitions will reach over 100 libraries and an estimated 1.5 million patrons. In this paper we will discuss a range of findings from almost a decade of deploying both high and low tech STEM learning strategies into libraries, including usage and engagement by library patrons, and challenges (and solutions) for deploying technologically sophisticated components into libraries which may or may not have dedicated technical staff.
Qualifizierung für "Industrie 4.0". Facharbeit in Deutschland und deutschen Auslandsniederlassungen in Emerging Economies

NASA Astrophysics Data System (ADS)

Fuchs, Martina; Pilz, Matthias; Wiemann, Judith; Wiemann, Kristina

2017-06-01

Frey and Osbourne's (2013) notion of the end of professional technical skills caused by Industry 4.0 (smart manufacturing), also known as increasing polarisation into "lousy and lovely jobs", is a topical issue. This contribution is a critical review of this idea in the context of German multinational companies, many of which are intensifying their efforts to introduce international customer-oriented quality production, digital high-tech and new human-machine-interfaces. Such high-tech production requires that the companies further internationalise practices of the German technical vocational education and training to emerging economies as Mexico, India and China. For German multinational companies this rather suggests an increase in professional technical skills (also on an international level) and less so rationalisation potentials in this particular segment of production work.
Intermittent kangaroo mother care: a NICU protocol.

PubMed

Davanzo, Riccardo; Brovedani, Pierpaolo; Travan, Laura; Kennedy, Jacqueline; Crocetta, Anna; Sanesi, Cecilia; Strajn, Tamara; De Cunto, Angela

2013-08-01

The practice of kangaroo mother care (KMC) is steadily increasing in high-tech settings due to its proven benefits for both infants and parents. In spite of that, clear guidelines about how to implement this method of care are lacking, and as a consequence, some restrictions are applied in many neonatal intensive care units (NICUs), preventing its practice. Based on recommendations from the Expert Group of the International Network on Kangaroo Mother Care, we developed a hospital protocol in the neonatal unit of the Institute for Maternal and Child Health in Trieste, Italy, a level 3 unit, aimed to facilitate and promote KMC implementation in high-tech settings. Our guideline is therefore proposed, based both on current scientific literature and on practical considerations and experience. Future adjustments and improvements would be considered based on increasing clinical KMC use and further knowledge.
Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

PubMed

Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

2016-01-01

The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform ( C )_credit rating platform ( B )_investment and finance platform ( A ).
An Engineering Technology Skills Framework that Reflects Workforce Needs on Maui and the Big Island of Hawai'i

NASA Astrophysics Data System (ADS)

Seagroves, S.; Hunter, L.

2010-12-01

The Akamai Workforce Initiative (AWI) is an interdisciplinary effort to improve science/engineering education in the state of Hawai'i, and to train a diverse population of local students in the skills needed for a high-tech economy. In 2009, the AWI undertook a survey of industry partners on Maui and the Big Island of Hawai'i to develop an engineering technology skills framework that will guide curriculum development at the U. of Hawai'i - Maui (formerly Maui Community College). This engineering skills framework builds directly on past engineering-education developments within the Center for Adaptive Optics Professional Development Program, and draws on curriculum development frameworks and engineering skills standards from the literature. Coupling that previous work with reviews of past Akamai Internship projects and information from previous conversations with the local high-tech community led to a structured-interview format where engineers and managers could contribute meaningful commentary to this framework. By incorporating these local high-tech companies' needs for entry-level engineers and technicians, a skills framework emerges that is unique and illuminating. Two surprising features arise in this framework: (1) "technician-like" skills of making existing technology work are on similar footing with "engineer-like" skills of creating new technology; in fact, both engineers and technicians at these workplaces use both sets of skills; and (2) project management skills are emphasized by employers even for entry-level positions.
AVA Guide to Federal Funding for Tech Prep.

ERIC Educational Resources Information Center

Brustein, Michael

This handbook outlines the options and requirements for federal support for tech prep in the Perkins law. It explains what educators must do and not do to assure compliance with all the law's mandates and to avoid audit exceptions. The guide also covers new tech prep provisions that were included in the Higher Education Act of 1992. Discussed in…
A User-Friendly Model for Business/Education Partnerships.

ERIC Educational Resources Information Center

Brooks, Gayle; Bell Carmine

In an effort to ensure local business involvement, the Steering Committee of the Tech Prep Consortium at Pasco-Hernando Community College (PHCC) in Central Florida invited members of the local business community to a Tech Prep Kickoff luncheon to sell them on Tech Prep. A tremendous number of companies attended the meeting and, to focus the energy…
Virginia Water Resources Research Center - at Virginia Tech since 1965

Science.gov Websites

Virginia Water Resources Research Center at Virginia Tech since 1965 Search for: Search Skip to collaborative research, extension, and education programs to develop solutions to water resource challenges. We Monitoring Council Conference: March 21, 2018 The Virginia Water Resources Research Center at Virginia Tech
Turning Students into Employees: The School-to-Work Payoff.

ERIC Educational Resources Information Center

Center for Occupational Research and Development, Inc., Waco, TX.

This booklet describes the success of tech prep under the federal school-to-work (STW) initiative and provides case studies showing how schools and businesses are using tech prep to create the world's best work force for the new millennium. The first section discusses the payoff from STW, and the second section describes tech prep. Section 3…
Igniting the Spark: Tech Trek STEM Camps for Girls. Summary of Survey Findings

ERIC Educational Resources Information Center

American Association of University Women, 2014

2014-01-01

Tech Trek opens up STEM possibilities for girls in many contexts. It expands and influences their academic and social lives, starting in middle school and continuing on into their careers. The program seeks out talented girls, sparks their interest, illuminates the value of a college education, and validates their passions. Tech Trek's exciting,…
Virginia Tech Weighs Hundreds of Recommendations and Acts on Some

ERIC Educational Resources Information Center

Fischer, Karin

2008-01-01

Three reports on last April's shootings left Virginia Tech under a mountain of recommendations--roughly 400 in all. So far the university has dealt with some of the most significant ones. Virginia Tech established an emergency-notification system, created a team to assess at-risk students and employees, and hired additional police officers and…
Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Report

ERIC Educational Resources Information Center

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…
Connecting Teachers and Ed-Tech Developers: Lessons from NYC's "Gap App" Program. Technical Appendices

ERIC Educational Resources Information Center

Villavicencio, Adriana; Siman, Nina; Lafayette, Camille; Kang, David

2016-01-01

In 2011, with support from a federal Investing in Innovation grant, the NYC Department of Education launched Innovate NYC Schools. The initiative was designed to address two, related challenges to effectively integrating education technology (ed-tech) into classrooms: First, procurement of ed-tech tools is often hampered by a disconnect between…
75 FR 19626 - Notice of Intent To Grant Exclusive Patent License: SciTech Medical Inc.

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-15

... DEPARTMENT OF DEFENSE Department of the Navy Notice of Intent To Grant Exclusive Patent License: SciTech Medical Inc. AGENCY: Department of the Navy, DoD. ACTION: Notice. SUMMARY: The Department of the Navy hereby gives notice of its intent to grant a partially exclusive license to SciTech Medical...
The Debreather and NuTech: A Reply to Kleespies

ERIC Educational Resources Information Center

Ogden, Russel D.

2010-01-01

This article responds to Phillip Kleespies's (2010/this issue) commentary on NuTech fieldworkers and their use of the debreather. Non-medical assistance with suicide raises legitimate concerns about accountability, public safety, and care for those who are suffering. Given that suicide is not a crime, an outcome of the NuTech movement may be that…
75 FR 28656 - Amphenol Printed Circuits, Inc., a Subsidiary of Amphenol Corporation, Including On-Site Leased...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-21

..., MicoTech, and CoWorx, Nashua, NH; Amended Certification Regarding Eligibility To Apply for Worker... commercial products. The company reports that workers leased from Technical Needs, MicoTech, and CoWorx were... amending this certification to include workers leased from Technical Needs, MicoTech, and CoWorx working on...
Impact of the Siena College Tech Valley Scholars Program on Student Outcomes

ERIC Educational Resources Information Center

Medsker, Larry; Allard, Lee; Tucker, Lucas J.; O'Donnell, Jodi L.; Sterne-Marr, Rachel; Bannon, Jon; Finn, Rose; Weatherwax, Allan

2016-01-01

The Tech Valley Scholars (TVS) program included 38 students who joined this program over the course of three academic years, from 2009 to 2012. These students comprise the experimental group for this study to determine if participating in the NSF-funded Tech Valley Scholars program improved academic outcomes. The experimental group was compared to…
Discrete Event Supervisory Control and Nonlinear Motion Control for DoD and Industrial Systems

DTIC Science & Technology

2014-03-17

F.L. Lewis, and K . Subbarao , “Sliding Mode Approach to Control Quadrotor Using Dynamic Inversion," Robust Control, Book 3, ed. A. Lazinica, InTech...person shall be subject to any oenalty for failing to comply with a collection of information if it does not display a currently valid 0 M B control...TION OF: 17. LIMITATION OF a REPORT b . ABSTRACT c. THIS PAGE ABSTRACT uu uu uu uu 15. NUMBER OF PAGES 19a NAME OF RESPONSIBLE PERSON Frank Lewis
High-Tech Partnerships Mean Business

ERIC Educational Resources Information Center

Schachter, Ron

2013-01-01

It's not news that public school districts have maintained productive relationships with the business community over the years. In Ohio, Cincinnati Bell recently helped a failing high school in the Cincinnati Public Schools transform itself into an information technology academy by providing student internships, a fleet of volunteer mentors, and…
The 1994 Ames Research Center publications: A bibliography

NASA Technical Reports Server (NTRS)

Scarich, Shelley J. (Editor)

1995-01-01

This document is a compilation of the scientific and technical information that Ames Research Center has produced during the calendar year 1994. Included are citations for formal reports, high-number conference publications, high-number technical memorandums, contractor reports, journal articles, meeting presentation, tech briefs, patents, and translations.

Dynamic neural networks based on-line identification and control of high performance motor drives

NASA Technical Reports Server (NTRS)

Rubaai, Ahmed; Kotaru, Raj

1995-01-01

In the automated and high-tech industries of the future, there wil be a need for high performance motor drives both in the low-power range and in the high-power range. To meet very straight demands of tracking and regulation in the two quadrants of operation, advanced control technologies are of a considerable interest and need to be developed. In response a dynamics learning control architecture is developed with simultaneous on-line identification and control. the feature of the proposed approach, to efficiently combine the dual task of system identification (learning) and adaptive control of nonlinear motor drives into a single operation is presented. This approach, therefore, not only adapts to uncertainties of the dynamic parameters of the motor drives but also learns about their inherent nonlinearities. In fact, most of the neural networks based adaptive control approaches in use have an identification phase entirely separate from the control phase. Because these approaches separate the identification and control modes, it is not possible to cope with dynamic changes in a controlled process. Extensive simulation studies have been conducted and good performance was observed. The robustness characteristics of neuro-controllers to perform efficiently in a noisy environment is also demonstrated. With this initial success, the principal investigator believes that the proposed approach with the suggested neural structure can be used successfully for the control of high performance motor drives. Two identification and control topologies based on the model reference adaptive control technique are used in this present analysis. No prior knowledge of load dynamics is assumed in either topology while the second topology also assumes no knowledge of the motor parameters.
Technology for Work, Home, and Leisure. Tech Use Guide: Using Computer Technology.

ERIC Educational Resources Information Center

Williams, John M.

This guide provides a brief introduction to several types of technological devices useful to individuals with disabilities and illustrates how some individuals are applying technology in the workplace and at home. Devices described include communication aids, low-vision products, voice-activated systems, environmental controls, and aids for…
Finite element simulation of structural performance on flexible pavements with stabilized base/treated subbase materials under accelerated loading : tech summary.

DOT National Transportation Integrated Search

2011-12-01

Accelerated pavement testing (APT) has been increasingly used by state highway agencies in recent years for evaluating pavement : design and performance through applying a simulative heavy vehicular load to the pavement section under controlled fi el...
Testing and analysis of LWT and SCB properties of asphaltic concrete mixtures : tech summary.

DOT National Transportation Integrated Search

2016-04-01

For pavement to perform well in the fi eld, a balance of both rut and crack resistance in response to the traffi c loads : and environment conditions is required. Controlling volumetric properties of a hot mix asphalt (HMA) mixture is not : enough to...
Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 8. High Tech High School

ERIC Educational Resources Information Center

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…
Screening of Potential Landing Gear Noise Control Devices at Virginia Tech For QTD II Flight Test

NASA Technical Reports Server (NTRS)

Ravetta, Patricio A.; Burdisso, Ricardo A.; Ng, Wing F.; Khorrami, Mehdi R.; Stoker, Robert W.

2007-01-01

In support of the QTD II (Quiet Technology Demonstrator) program, aeroacoustic measurements of a 26%-scale, Boeing 777 main landing gear model were conducted in the Virginia Tech Stability Tunnel. The objective of these measurements was to perform risk mitigation studies on noise control devices for a flight test performed at Glasgow, Montana in 2005. The noise control devices were designed to target the primary main gear noise sources as observed in several previous tests. To accomplish this task, devices to reduce noise were built using stereo lithography for landing gear components such as the brakes, the forward cable harness, the shock strut, the door/strut gap and the lower truck. The most promising device was down selected from test results. In subsequent stages, the initial design of the selected lower truck fairing was improved to account for all the implementation constraints encountered in the full-scale airplane. The redesigned truck fairing was then retested to assess the impact of the modifications on the noise reduction potential. From extensive acoustic measurements obtained using a 63-element microphone phased array, acoustic source maps and integrated spectra were generated in order to estimate the noise reduction achievable with each device.
NASA Tech Briefs, May 2003

NASA Technical Reports Server (NTRS)

2003-01-01

Topics covered include: Using Diffusion Bonding in Making Piezoelectric Actuators; Wireless Temperature-Monitoring System; Analog Binaural Circuits for Detecting and Locating Leaks; Mirrors Containing Biomimetic Shape-Control Actuators; Surface-Micromachined Planar Arrays of Thermopiles; Cascade Back-Propagation Learning in Neural Networks; Perovskite Superlattices as Tunable Microwave Devices; Rollable Thin-Shell Nanolaminate Mirrors; Flight Tests of a Ministick Controller in an F/A-18 Airplane; Piezoelectrically Actuated Shutter for High Vacuum; Bio-Inspired Engineering of Exploration Systems; Microscope Cells Containing Multiple Micromachined Wells; Electrophoretic Deposition for Fabricating Microbatteries; Integrated Arrays of Ion-Sensitive Electrodes; Model of Fluidized Bed Containing Reacting Solids and Gases; Membrane Mirrors With Bimorph Shape Actuators; Using Fractional Clock-Period Delays in Telemetry Arraying; Developing Generic Software for Spacecraft Avionics; Numerical Study of Pyrolysis of Biomass in Fluidized Beds; and Assessment of Models of Chemically Reacting Granular Flows.
KSC-02pd1086

NASA Image and Video Library

2002-06-27

KENNEDY SPACE CENTER, FLA. -- At the podium, Center Director Roy Bridges Jr. offers remarks at the commissioning ceremony for the new Convoy Command Vehicle behind him. At left is Mike McCulley, chief operating officer, United Space Alliance. The new 40-foot vehicle is replacing a 15-year old model, and will be used following Shuttle landings as the prime vehicle to control critical communications between the orbiter, the crew and the Launch Control Center, to monitor the health of the Shuttle Orbiter systems and to direct convoy operations at the Shuttle Landing Facility. Upgrades and high-tech features incorporated into the design and development of this vehicle make it more reliable and efficient for the convoy crew. Seating capacity was increased from 4 to 12, and video recorders and television monitors were added to provide the convoy team with the maximum amount of visual information
KSC-02pd1087

NASA Image and Video Library

2002-06-27

KENNEDY SPACE CENTER, FLA. -- At the podium, Center Director Roy Bridges Jr. offers remarks at the commissioning ceremony for the new Convoy Command Vehicle behind him. At left is Mike McCulley, chief operating officer, United Space Alliance. The new 40-foot vehicle is replacing a 15-year old model, and will be used following Shuttle landings as the prime vehicle to control critical communications between the orbiter, the crew and the Launch Control Center, to monitor the health of the Shuttle Orbiter systems and to direct convoy operations at the Shuttle Landing Facility. Upgrades and high-tech features incorporated into the design and development of this vehicle make it more reliable and efficient for the convoy crew. Seating capacity was increased from 4 to 12, and video recorders and television monitors were added to provide the convoy team with the maximum amount of visual information
Feature Extraction Assessment Study.

DTIC Science & Technology

1984-11-01

base in the form of orthophotos , control manuscripts, . or maps or charts; aids to feature identification such as im- agery (rectified and unrectified...manually delineated (i.e. , drawn by * hand) on a feature manuscript which may be a mylar overlay on an orthophoto or other control base. Once delineated...partition of tiled constant gray level regions, with addi- tive noise in each, it is not clear that any segmentation tech- nique would identify each
Rapid Prototyping in Technology Education.

ERIC Educational Resources Information Center

Flowers, Jim; Moniz, Matt

2002-01-01

Describes how technology education majors are using a high-tech model builder, called a fused deposition modeling machine, to develop their models directly from computer-based designs without any machining. Gives examples of applications in technology education. (JOW)
Structural characterization of UHPC waffle bridge deck and connections : [tech transfer summary].

DOT National Transportation Integrated Search

2014-07-01

Contribute to design an innovative and durable precast deck alternative : using ultra-high performance concrete (UHPC) for accelerated bridge : construction : Evaluate the structural characteristics of the UHPC waffle deck, : critical connect...
Saving High-Tech Innovators from Egregious Legal Disputes Act of 2013

THOMAS, 113th Congress

Rep. DeFazio, Peter A. [D-OR-4

2013-02-27

House - 04/08/2013 Referred to the Subcommittee on Courts, Intellectual Property, And The Internet. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:
Saving High-Tech Innovators from Egregious Legal Disputes Act of 2012

THOMAS, 112th Congress

Rep. DeFazio, Peter A. [D-OR-4

2012-08-01

House - 08/14/2012 Referred to the Subcommittee on Intellectual Property, Competition and the Internet. (All Actions) Tracker: This bill has the status IntroducedHere are the steps for Status of Legislation:
Managerial segmentation of service offerings in work commuting.

DOT National Transportation Integrated Search

2015-03-01

Methodology to efficiently segment markets for public transportation offerings has been introduced and exemplified in an : application to an urban travel corridor in which high tech companies predominate. The principal objective has been to introduce...
Dealing with Altruism

ERIC Educational Resources Information Center

Kennedy, Donald

2013-01-01

At a time when schools are focusing heavily on high tech and engineering, general education is more important than ever. Wilson's book furnishes good ideas on how to bring about a curricular fusion between human studies and the sciences.
A Virginia Tech MFT Ethics Class Reflects on the Shootings at Virginia Tech

ERIC Educational Resources Information Center

Piercy, Fred; Banker, Jamie; Traylor, Ryan; Krug, Sarah; Castanos, Carolina; Cole, Elise; Ciafardini, Anthony J.; Jordal, Christian; Rodgers, Brandon; Stewart, Shelley; Goodwin, Annabelle

2008-01-01

The authors of this article include the professor and most of the students in a doctoral course on marriage and family therapy ethical and professional issues that met the semester that a disturbed student shot and killed 32 Virginia Tech students and faculty before killing himself. In this article, we reflect through short essays on issues…
The Tech Prep Handbook: Essential Documents To Promte Effective Tech Prep Policies and Practices.

ERIC Educational Resources Information Center

Hensley, Oliver D., Ed.; And Others

Developed during a project to document and analyze the tech prep initiative in Texas, this handbook contains exemplary documents associated with the model programs in the state. This second edition of the handbook organizes documents in sections (sections A, C, D, and G) that correspond to the major impact sectors identified during the research…
Peace at Virginia Tech; A LEAP to Promote the Liberal Arts

ERIC Educational Resources Information Center

Wilson, Robin; Wasley, Paula

2008-01-01

This article reports that a Virginia Tech professor whose wife was among 32 people killed by a student gunman last year will become director of the university's new Center for Peace Studies and Violence Prevention. Jerzy Nowak will give up his job as chairman of Tech's horticulture department to take the new post on July 1. His wife, Jocelyne…
Proceedings of the International Conferences on Education Technologies (ICEduTech) and Sustainability, Technology and Education (STE) (New Tapei City, Taiwan, December 10-12, 2014)

ERIC Educational Resources Information Center

Kommers, Piet, Ed.; Issa, Tomayess, Ed.; Issa, Theodora, Ed.; Chang, Dian-Fu, Ed.; Isias, Pedro, Ed.

2014-01-01

These proceedings contain the papers of the International Conferences on Educational Technologies (ICEduTech 2014), and Sustainability, Technology and Education (STE 2014). The International Conference on Educational Technologies (ICEduTech 2014) is the scientific conference addressing the real topics as seen by teachers, students, parents and…

Virginia Tech Was Slow to Respond to Gunman, Panel Finds

ERIC Educational Resources Information Center

Fischer, Karin; Wilson, Robin

2007-01-01

This article reports on the findings of the state panel on the Virginia Tech massacre. A state panel that investigated last spring's massacre at Virginia Tech has issued a harshly worded report that says the university erred in the way it handled a mentally disabled student who became a killer and in how it dealt with the immediate aftermath of…
78 FR 23622 - In the Matter of NewTech Brake Corp., Order of Suspension of Trading

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-19

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] In the Matter of NewTech Brake Corp., Order of Suspension of Trading April 17, 2013. It appears to the Securities and Exchange Commission that there is a lack of current and accurate information concerning the securities of NewTech Brake Corp. because it...
Technology Predictors of Inquiry-Based Teaching: An Examination of Two K-12 1:1 Pilots

ERIC Educational Resources Information Center

Theis, Jennifer Lee

2016-01-01

The purpose of this study was to examine the relationship of technology use and facilitation of inquiry-based teaching across the curriculum through the implementation of a one-to-one technology pilot. This study also explored which technology related factors (Teacher Tech Use, Student Tech Use, Tech Barriers, Teacher Comfort) best predict the use…
ECO TECH LINK: PT3 Grant Builds Technology Circles in the K-18 Community.

ERIC Educational Resources Information Center

Klinger, Katie; Duckett, Jane; Medrano, Maria; Crow, Nedra; Stowers, Gwen

Through the vehicle of the PT3 grant program, ECO TECH LINK has built a strong consortium to support technology circles of government, education and business in order to raise student achievement scores, shorten the time it takes to earn a teaching credential, and enhance the quality of teacher credential courses. The ECO TECH LINK grant enables…
Cumulative index to NASA Tech Briefs, 1986-1990, volumes 10-14

NASA Technical Reports Server (NTRS)

1992-01-01

Tech Briefs are short announcements of new technology derived from the R&D activities of the National Aeronautics and Space Administration. These briefs emphasize information considered likely to be transferrable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. This cumulative index of Tech Briefs contains abstracts and four indexes (subject, personal author, originating center, and Tech Brief number) and covers the period 1986 to 1990. The abstract section is organized by the following subject categories: electronic components and circuits, electronic systems, physical sciences, materials, computer programs, life sciences, mechanics, machinery, fabrication technology, and mathematics and information sciences.
Development of Non-Proprietary Ultra-High Performance Concrete for Use in the Highway Bridge Sector : TechBrief

DOT National Transportation Integrated Search

2013-10-01

The long-term goals of this study are to facilitate the use of ultra-high performance concrete (UHPC) among U.S. suppliers and contractors, accelerate its application in U.S. construction, and promote a more resilient and sustainable future U.S. infr...
Supporting Online Learners: Blending High-Tech with High-Touch

ERIC Educational Resources Information Center

Dolan, Sean; Donohue, Chip; Holstrom, Lisa; Pernell, Latonia; Sachdev, Anu

2009-01-01

Effective and easily accessible student support services are essential to the success of adult learners. A student-centered approach is especially important in the design and delivery of online courses, professional certificates, and degree programs for early childhood professionals. A student-first approach is essential for non-traditional adult…
Finding the Future That Fits.

ERIC Educational Resources Information Center

Taylor, Alison

In 2000, a government-supported foundation called Careers the Next Generation (CNG) in Alberta, Canada, began coordinating summer internships for high school students in information and computer technology (ICT). The participating firms represented a mix of large and small private and public organizations in high-tech and other industries in the…
Redefining the High-Technology Classroom.

ERIC Educational Resources Information Center

Dickson, Gary W.; Segars, Albert

1999-01-01

Defines the physical and virtual space of high-tech classrooms in terms of one-to-many, many-to-one, one-to-one, and many-to-many communications modes. Urges an active approach to using information technology that includes administrative and technical support, rewards for innovation, training, security, and good design. (SK)
When Rural Reality Goes Virtual.

ERIC Educational Resources Information Center

Husain, Dilshad D.

1998-01-01

In rural towns where sparse population and few business are barriers, virtual reality may be the only way to bring work-based learning to students. A partnership between a small-town high school, the Ohio Supercomputer Center, and a high-tech business will enable students to explore the workplace using virtual reality. (JOW)
Documentaries: Motivating the Tech Generation to Research and Write

ERIC Educational Resources Information Center

Price, Dallas

2012-01-01

This article describes the process, tools, and benefits of engaging highly gifted middle-school age students in producing historical documentaries. Dallas Price, a sixth-grade teacher in a self-contained public school program for highly gifted students, highlights the project components that help students develop twenty-first-century skills within…
Innovation in Student Services: Planning for Models Blending High Touch/High Tech.

ERIC Educational Resources Information Center

Burnett, Darlene J., Ed.; Oblinger, Diana G., Ed.

This collection is intended to help planners, administrators, and student service professionals gain a better understanding of the changes emerging in student services as it demonstrates how innovative leaders are responding to these challenges. Part 1, "Creating the Student-Centered Experience," contains: (1) "Innovation in Student…
Student Images of Agriculture: Survey Highlights and Recommendations.

ERIC Educational Resources Information Center

Mallory, Mary E.; Sommer, Robert

1986-01-01

The high school students studied were unaware of the range of opportunities in agricultural careers. It was recommended that the University of California, Davis initiate a public relations campaign, with television advertising, movies, and/or public service announcements focusing on exciting, high-tech agricultural research and enterprise. (CT)
Made in America

ERIC Educational Resources Information Center

Cech, Scott J.

2008-01-01

According to government data, even though manufacturing in general continues to shrink as a proportion of the U.S. economy, domestic high-tech manufacturing has been expanding, and with it, the need for skilled workers. Hence high school students are taking at the Manufacturing Technology Academy (MTA), a 4-year-old dual-enrollment program on the…
Concise review: carbon nanotechnology: perspectives in stem cell research.

PubMed

Pryzhkova, Marina V

2013-05-01

Carbon nanotechnology has developed rapidly during the last decade, and carbon allotropes, especially graphene and carbon nanotubes, have already found a wide variety of applications in industry, high-tech fields, biomedicine, and basic science. Electroconductive nanomaterials have attracted great attention from tissue engineers in the design of remotely controlled cell-substrate interfaces. Carbon nanoconstructs are also under extensive investigation by clinical scientists as potential agents in anticancer therapies. Despite the recent progress in human pluripotent stem cell research, only a few attempts to use carbon nanotechnology in the stem cell field have been reported. However, acquired experience with and knowledge of carbon nanomaterials may be efficiently used in the development of future personalized medicine and in tissue engineering.
High tech cognitive and acoustic enrichment for captive elephants.

PubMed

French, Fiona; Mancini, Clara; Sharp, Helen

2018-04-15

This paper investigates the potential for using technology to support the development of sensory and cognitive enrichment activities for captive elephants. It explores the usefulness of applying conceptual frameworks from interaction design and game design to the problem of developing species-specific smart toys that promote natural behaviours and provide stimulation. We adopted a Research through Design approach, and describe how scientific inquiry supported our design process, while the creation of artefacts guided our investigations into possible future solutions. Our fieldwork resulted in the development of an interactive prototype of an acoustic toy that elephants are able to control using interface elements constructed from a range of natural materials. Copyright © 2017 Elsevier B.V. All rights reserved.
KSC-2012-3987

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – At NASA Kennedy Space Center’s Shuttle Landing Facility, or SLF, in Florida, NASA Aviation Safety Officer Joe Torsani, at left, speaks with students and their flight instructors after they arrived in Cherokee Warrior and Cessna 172S lightweight aircraft from Florida Tech, FIT, in Melbourne. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett
KSC-2012-3986

NASA Image and Video Library

2012-07-20

CAPE CANAVERAL, Fla. – At NASA Kennedy Space Center’s Shuttle Landing Facility, or SLF, in Florida, NASA Aviation Safety Officer Joe Torsani, at right, speaks with students and their flight instructors after they arrived in Cherokee Warrior and Cessna 172S lightweight aircraft from Florida Tech, or FIT, in Melbourne. The middle and high school students are participating in FIT’s Av/Aero summer camp experience. They and their flight instructors toured the SLF midfield control tower, viewed F104 Starfighters and NASA Huey helicopters in the RLV Hangar, viewed the runway plaques marking wheels stop for each of the three space shuttles, and toured the Vehicle Assembly Building where space shuttle Atlantis currently is stored. Photo credit: NASA/Kim Shiflett
Clinical results of Hi-tech Knee II total knee arthroplasty in patients with rheumatoid athritis: 5- to 12-year follow-up

PubMed Central

2012-01-01

Background Total knee arthroplasty (TKA) is a common form of treatment to relieve pain and improve function in cases of rheumatoid arthritis (RA). Good clinical outcomes have been reported with a variety of TKA prostheses. The cementless Hi-Tech Knee II cruciate-retaining (CR)-type prosthesis, which has 6 fins at the anterior of the femoral component, posterior cruciate ligament (PCL) retention, flat-on-flat surface component geometry, all-polyethylene patella, strong initial fixation by the center screw of the tibial base plate, 10 layers of titanium alloy fiber mesh, and direct compression molded ultra high molecular weight polyethylene (UHMWPE), is appropriate for TKA in the Japanese knee. The present study was performed to evaluate the clinical results of primary TKA in RA using the cementless Hi-Tech Knee II CR-type prosthesis. Materials and methods We performed 32 consecutive primary TKAs using cementless Hi-Tech Knee II CR-type prosthesis in 31 RA patients. The average follow-up period was 8 years 3 months. Clinical evaluations were performed according to the American Knee Society (KS) system, knee score, function score, radiographic evaluation, and complications. Results The mean postoperative maximum flexion angle was 115.6°, and the KS knee score and function score improved to 88 and 70 after surgery, respectively. Complications, such as infection, occurred in 1 patient and revision surgery was performed. There were no cases of loosening in this cohort, and prosthesis survival rate was 96.9% at 12 years postoperatively. Conclusion These results suggest that TKA using the cementless Hi-Tech Knee II CR-type prosthesis is a very effective form of treatment in RA patients at 5 to 12 years postoperatively. Further long-term follow-up studies are required to determine the ultimate utility of this type of prosthesis. PMID:22356935
Types and status of high reliability practices in the federal fire community (Abstract)

Treesearch

Anne Black; Brooke McBride

2012-01-01

Since emerging in the late 1980s, the paradigm of High Reliability Organizing (HRO) has sought to describe how and why certain organizations consistently function safely under hazardous conditions. Researchers have explored a variety of industrial situations, from the early observations of nuclear aircraft carrier operations to nursing units and even high-tech IPOs....

Case Studies of Leading Edge Small Urban High Schools. Relevance Strategic Designs: 7. TechBoston Academy

ERIC Educational Resources Information Center

Shields, Regis Anne; Ireland, Nicole; City, Elizabeth; Derderian, Julie; Miles, Karen Hawley

2008-01-01

This report is one of nine detailed case studies of small urban high schools that served as the foundation for the Education Resource Strategies (ERS) report "Strategic Designs: Lessons from Leading Edge Small Urban High Schools." These nine schools were dubbed "Leading Edge Schools" because they stand apart from other high…
Demonstration of the trauma nurses talk tough seat belt diversion program in North Carolina reaches high-risk drivers : traffic tech.

DOT National Transportation Integrated Search

2014-03-01

Nationally, more than 8 of every 10 drivers wear seat belts, but : individual State belt rates vary from as high as 98% to as low as : 69%. Within individual States, rural areas often have lower rates. : Strong seat belt laws and highly visible enfor...
High-Technology Companies Often Turn to Colleges for Confidential 'Beta Tests' of New Products.

ERIC Educational Resources Information Center

Turner, Judith Axler

1988-01-01

Beta testing--the process of trying a product in a real-world setting before releasing it commercially--exploits a natural interface between universities and high-technology industries. High-tech companies need confidential, real-world tests of new products, and universities are eager to get an early look at tomorrow's technology. (MLW)
Education for Jobs in a High Tech World: What Has Been Learned from Industry.

ERIC Educational Resources Information Center

Long, James P.

Educators are increasingly turning to employers for advice about educating for future jobs. A recent project involved conducting a series of seven national conferences on high technology to learn about innovations in industry. Experts from industry told educators that industry itself does a great deal of high technology training, computers are the…
Bridging the Skills Gap. Working Paper Part I: High Technology Industries.

ERIC Educational Resources Information Center

Kaplan, Christine E.

In this working paper on high technology industries, a few representative industries are studied in detail, while an overview is also given of the group as a whole. The overview, which highlights the findings of selected studies of the unique characteristics of high tech industries, considers such issues as locational factors, occupational and…
Psychological and Ethical Considerations Concerning the Debreather and Assisted Suicide: A Commentary on Ogden

ERIC Educational Resources Information Center

Kleespies, Phillip M.

2010-01-01

This article offers a commentary on the report by Russel Ogden (2010/this issue) on the use of the "debreather" for suicide assistance by the NuTech (or New Technologies for Self-Deliverance) program. The emergence of NuTech is set within its historical and political context. Nu Tech is criticized for its anarchic and extreme advocacy of…
First spaceborne phase altimetry over sea ice using TechDemoSat-1 GNSS-R signals

NASA Astrophysics Data System (ADS)

Li, Weiqiang; Cardellach, Estel; Fabra, Fran; Rius, Antonio; Ribó, Serni; Martín-Neira, Manuel

2017-08-01

A track of sea ice reflected Global Navigation Satellite System (GNSS) signal collected by the TechDemoSat-1 mission is processed to perform phase altimetry over sea ice. High-precision carrier phase measurements are extracted from coherent GNSS reflections at a high angle of elevation (>57°). The altimetric results show good consistency with a mean sea surface (MSS) model, and the root-mean-square difference is 4.7 cm with an along-track sampling distance of ˜140 m and a spatial resolution of ˜400 m. The difference observed between the altimetric results and the MSS shows good correlation with the colocated sea ice thickness data from Soil Moisture and Ocean Salinity. This is consistent with the reflecting surface aligned with the bottom of the ice-water interface, due to the penetration of the GNSS signal into the sea ice. Therefore, these high-precision altimetric results have potential to be used for determination of sea ice thickness.
Assisting children with attention deficit hyperactivity disorder to reduce the hyperactive behavior of arbitrary standing in class with a Nintendo Wii remote controller through an active reminder and preferred reward stimulation.

PubMed

Shih, Ching-Hsiang; Wang, Shu-Hui; Wang, Yun-Ting

2014-09-01

Recent studies in the field of special education have shown that in combination with software technology, high-tech commercial products can be applied as useful assistive technology devices to help people with disabilities. This study extended this concept to turn a Nintendo Wii Remote Controller into a high-performance limb action detector, in order to evaluate whether two students with Attention Deficit Hyperactivity Disorder (ADHD) could reduce their hyperactive behavior through an active reminder and stimulation in the form of the participants' preferred rewards. This study focused on one particular hyperactive behavior common to both students: standing up arbitrarily during class. The active reminder was in the form of vibration feedback provided via the built-in function of the Wii Remote Controller, which was controlled and triggered by a control system to remind participants when they were engaging in standing behavior. This study was performed according to a multiple baseline design across participants. The results showed that both participants significantly improved their control over their hyperactive behavior during the intervention phase, and retained this effective performance in the maintenance phase. The practical and developmental implications of the findings are discussed. Copyright © 2014 Elsevier Ltd. All rights reserved.
High-Tech Comfort.

ERIC Educational Resources Information Center

Kennedy, Mike

2001-01-01

Explains why the influx of computers into classrooms means that schools need to pay more attention to ergonomic furnishings. The health risks of poorly designed furniture are discussed as are the kings of furniture that work best ergonomically for computer use. (GR)
“Open Hatch” Tour of Offshore Wind Buoy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zayas, Jose

2015-09-18

Wind and Water Power Technologies Office Director, Jose Zayas gives a behind the scenes tour of the AXYS WindSentinel research buoy, which uses high-tech instruments to measure conditions for potential offshore wind energy development.
High-Tech Opens Doors.

ERIC Educational Resources Information Center

Eichleay, Kristen; Pressman, Harvey

1987-01-01

Exemplary projects which help disabled people use technology (particularly computers) expand their employment opportunities include: Project Entry (Seattle); Georgia Computer Programmer Project (Atlanta); Perkins Project with Industry (Watertown, Massachusetts); Project Byte (Newton Massachusetts); Technology Relevant to You (St. Louis); Special…
How I teach evidence-based epidural information in a hospital and keep my job.

PubMed

Tumblin, Ann

2007-01-01

A childbirth educator reveals her dilemma in teaching evidence-based practice in today's high-tech birth climate. She focuses on strategies to use when sharing epidural information with expectant parents.
Interlock Data Utilization : Traffic Tech

DOT National Transportation Integrated Search

2017-06-01

Driving-while-impaired (DWI) offenders present a high risk to traffic safety. Alcohol ignition interlocks are now widely used for DWI offenders and can significantly reduce DWI recidivism while on the offenders vehicle. In a typical year an interl...
Special Feature: Teaching about High Tech.

ERIC Educational Resources Information Center

Kopf, Michael; And Others

1992-01-01

Includes four articles: "Virtual Reality" (Kopf), description of its uses in computer-assisted design, architecture, and technical training; "SME (Society of Manufacturing Engineers) Robotics Contest Opens Doors to Future" (Wagner); "Superconductivity" (Canady), description of classroom demonstrations and experiments;…
Colored entrance treatments for rural traffic calming : tech brief.

DOT National Transportation Integrated Search

2013-10-01

Small rural communities often lack the expertise and resources necessary to address speeding and the persistent challenge of slowing high-speed through traffic. The entrances to communities are especially problematic given that drivers must transitio...
Using haptic feedback to increase seat belt use : traffic tech.

DOT National Transportation Integrated Search

2011-07-01

The legacy of research on increasing seat belt use has : focused on enactment of seat belt legislation, public education, : high-visibility police enforcement, and seat belt : reminder systems. Several behavioral programs have : produced large, susta...
Assistive Devices: MedlinePlus Health Topic

MedlinePlus

... dressed. Some are high-tech tools, such as computers. Others are much simpler, like a "reacher" - a tool that helps you grab an object you can't reach. Learn More ... For What Conditions Are Assistive Devices Used? (National ...
Opportunistic use of a Foley catheter to provide a common electrocautery with a water-irrigating channel for hepatic parenchymal transection.

PubMed

Yamamoto, Yuzo; Yoshioka, Masato; Watanabe, Go; Uchinami, Hiroshi

2015-11-01

High-tech surgical energy devices that are used during a single surgery have increased in number and the expense for such disposable units is by no means negligible. We developed a handmade water-irrigating monopolar electrocautery using a Foley catheter to perform liver parenchymal transection. A commonly used 20-24 Fr Foley catheter was cut at a length of about 8 cm. The shaft of the 5 mm ball electrode measuring 13.5 cm in length was then inlaid into the urine drainage channel. The target tissues were cauterized without making an eschar, thereby preventing the adhesion of the electrode to the tissues. A ball electrode with our handmade water irrigation sheath can be made in only a few minutes at a very low cost, using common medical supplies and yielding satisfactory effects comparable to the use of specialized high-tech devices.
Meeting the challenge of stroke.

PubMed

Weir, N U; Dennis, M S

1997-10-01

It is the elderly who carry the burden of stroke. Whilst 130,000 people suffer a stroke in the UK every year, nearly three quarters of these cases occur over the age of 65 and nearly half occur over the age of 75. As the proportion of elderly in the population continues to grow, inevitably this burden will increase. With Scotland probably experiencing the highest stroke incidence in the UK and stroke already accounting for 5.5% of total hospital costs, challenges clearly lie ahead for the health service and Scottish society as a whole. The extent to which we are able to meet this challenge is becoming clearer. Thus far, therapeutic advance has been rather "low-tech", with organisation of services and the appropriate use of existing interventions showing modest and, just occasionally, dramatic benefits. In contrast, the high hopes raised by many "high-tech" solutions have largely been dashed or remain promising but unproven.
NASA Tech House: An early evaluation

NASA Technical Reports Server (NTRS)

1977-01-01

An architect-engineering firm, as well as university participants, performed system studies, evaluated construction methods, performed cost effectiveness studies, and prepared construction drawings which incorporated the selected technology features into a final design. A Technology Utilization House (Tech House) based on this design was constructed at the NASA Langley Research Center in Hampton, Virginia. The Tech House is instrumented so that the performance of the design features and energy systems can be evaluated during a planned family live-in period. As such, the house is both a demonstration unit and a research laboratory. The Tech House is to demonstrate the kind of single-family residence that will probably be available within the next five years.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.