ACE TECH: The Fourth Year of CTE and Academic Integration

ERIC Educational Resources Information Center

Knight, Eileen Quinn; Donahue, John; Knight, Patrick

2008-01-01

It only takes an hour or two of roaming the halls of Architecture, Construction and Engineering (ACE) Tech Charter High School to detect an enduring attitude of accomplishment from both the teachers and the students. This atmosphere is intentional. The school, located in Chicago, was created specifically to hone the skills of individuals choosing…

A community-based, interdisciplinary rehabilitation engineering course.

PubMed

Lundy, Mary; Aceros, Juan

2016-08-01

A novel, community-based course was created through collaboration between the School of Engineering and the Physical Therapy program at the University of North Florida. This course offers a hands-on, interdisciplinary training experience for undergraduate engineering students through team-based design projects where engineering students are partnered with physical therapy students. Students learn the process of design, fabrication and testing of low-tech and high-tech rehabilitation technology for children with disabilities, and are exposed to a clinical experience under the guidance of licensed therapists. This course was taught in two consecutive years and pre-test/post-test data evaluating the impact of this interprofessional education experience on the students is presented using the Public Service Motivation Scale, Civic Actions Scale, Civic Attitudes Scale, and the Interprofessional Socialization and Valuing Scale.

Educational Innovation in the Design of an Online Nuclear Engineering Curriculum

ERIC Educational Resources Information Center

Hall, Simin; Jones, Brett D.; Amelink, Catherine; Hu, Deyu

2013-01-01

The purpose of this paper is to describe the development and implementation phases of online graduate nuclear engineering courses that are part of the Graduate Nuclear Engineering Certificate program at Virginia Tech. Virginia Tech restarted its nuclear engineering program in the Fall of 2007 with 60 students, and by 2009, the enrollment had grown…

TechXcite: Discover Engineering--A New STEM Curriculum

ERIC Educational Resources Information Center

Sallee, Jeff; Schmitt-McQuitty, Lynn; Swint, Sherry; Meek, Amanda; Ybarra, Gary; Dalton, Rodger

2015-01-01

TechXcite is an engineering-focused, discovery-based after-school science, technology, engineering, and math (STEM) program. The free curriculum is downloadable from http://techxcite.pratt.duke.edu/ and is comprised of eight Modules, each with four to five 45-minute activities that exercise the science and math learned in school by using…

Nalco Fuel Tech

DOE Office of Scientific and Technical Information (OSTI.GOV)

Michalak, S.

1995-12-31

The Nalco Fuel Tech with its seat at Naperville (near Chicago), Illinois, is an engineering company working in the field of technology and equipment for environmental protection. A major portion of NALCO products constitute chemical materials and additives used in environmental protection technologies (waste-water treatment plants, water treatment, fuel modifiers, etc.). Basing in part on the experience, laboratories and RD potential of the mother company, the Nalco Fuel Tech Company developed and implemented in the power industry a series of technologies aimed at the reduction of environment-polluting products of fuel combustion. The engineering solution of Nalco Fuel Tech belong tomore » a new generation of environmental protection techniques developed in the USA. They consist in actions focused on the sources of pollutants, i.e., in upgrading the combustion chambers of power engineering plants, e.g., boilers or communal and/or industrial waste combustion units. The Nalco Fuel Tech development and research group cooperates with leading US investigation and research institutes.« less

Technology Strategy in Irregular Warfare: High-Tech Versus Right-Tech

DTIC Science & Technology

2015-12-01

ny-countys-confiscated-gun-policy/. 88 newest AH-64E. It has upgraded engines and rotor blades that enable the attack helicopter to have a quicker...was the extent of their defensive operations. Aircraft, helicopter gunships, armored vehicles, and artillery were directly used by Soviet forces...it into raw numbers, the Soviet Air Force had approximately 6,894 fixed-wing aircraft, and 3,320 helicopters .126 The Soviet Army had five times

75 FR 60820 - United States v. Adobe Systems, Inc., et al.; Proposed Final Judgment and Competitive Impact...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-01

... compete for high tech employees, and in particular specialized computer science and engineering talent on the basis of salaries, benefits, and career opportunities. In recent years, talented computer... Venue 4. Each Defendant hires specialized computer engineers and scientists throughout the United States...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Conway, R.

This article describes a petrol (gasoline) engine development project to combine the duel technologies of an Otto cycle engine with a modified cooling system and a high-tech processor-controlled bottoming cycle to harness not only the waste heat from the exhaust gases but also a significant proportion of the heat lost by a conventional petrol engine to the water coolant, resulting in a very substantial increase in energy conversion efficiency.

A Concept of Constructing a Common Information Space for High Tech Programs Using Information Analytical Systems

NASA Astrophysics Data System (ADS)

Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.

2016-04-01

The paper deals with the issues in program management used for engineering innovative products. The existing project management tools were analyzed. The aim is to develop a decision support system that takes into account the features of program management used for high-tech products: research intensity, a high level of technical risks, unpredictable results due to the impact of various external factors, availability of several implementing agencies. The need for involving experts and using intelligent techniques for information processing is demonstrated. A conceptual model of common information space to support communication between members of the collaboration on high-tech programs has been developed. The structure and objectives of the information analysis system “Geokhod” were formulated with the purpose to implement the conceptual model of common information space in the program “Development and production of new class mining equipment - “Geokhod”.

On-Demand Lectures Create an Effective Distributed Education Experience

ERIC Educational Resources Information Center

Lindsey, Stanley D.

2003-01-01

In this article, the author shares his experience teaching senior-level structural engineering courses at the Georgia Institute of Technology's Georgia Tech Regional Engineering Program. The program is a unique partnership of four universities--Georgia Tech, Savannah State University, Armstrong Atlantic State University, and Georgia Southern…

Planning a Successful Tech Show

ERIC Educational Resources Information Center

Nikirk, Martin

2011-01-01

Tech shows are a great way to introduce prospective students, parents, and local business and industry to a technology and engineering or career and technical education program. In addition to showcasing instructional programs, a tech show allows students to demonstrate their professionalism and skills, practice public presentations, and interact…

The Study of Philosophy in Innovative Power Engineering Post-graduate Course

NASA Astrophysics Data System (ADS)

Sokolova, J. V.

2017-11-01

Training of highly qualified personnel for the innovative high-tech fields of power engineering is one of the most important tasks of modern education. A number of special features of modern power engineering necessitate not only a highly specialized training but a wider approach in teaching postgraduate students of this field. These special features include a high degree of integration of science, industry, economic and social spheres, and the breadth of interdisciplinary connections in high-tech industries. The postgraduate philosophical training plays an important role in the educational process. The breadth of the problem field and the universality of philosophical knowledge reveal the methods and mechanisms of integration of such sub-disciplines that have significant methodological and structural differences: science, logical-mathematical, socio-economic, technological and human knowledge. Appeal to the philosophy at the stage of postgraduate training has a number of reasons. First of all, it is aimed at integrating of the specific content of different areas of knowledge into a holistic worldview. Secondly, it contributes in developing a critical attitude towards reality and science. What is more, the study of philosophy helps young researches to acquire the definition of their ideological position.

Dealing with Altruism

ERIC Educational Resources Information Center

Kennedy, Donald

2013-01-01

At a time when schools are focusing heavily on high tech and engineering, general education is more important than ever. Wilson's book furnishes good ideas on how to bring about a curricular fusion between human studies and the sciences.

STEM the Tide: Reforming Science, Technology, Engineering, and Math Education in America

ERIC Educational Resources Information Center

Drew, David E.

2011-01-01

One study after another shows American students ranking behind their international counterparts in the STEM fields--science, technology, engineering, and math. Business people such as Bill Gates warn that this alarming situation puts the United States at a serious disadvantage in the high-tech global marketplace of the twenty-first century, and…

[Some engineering problems on developing production industry of modern traditional Chinese medicine].

PubMed

Qu, Hai-bin; Cheng, Yi-yu; Wang, Yue-sheng

2003-10-01

Based on the review of some engineering problems on developing modern production industry of Traditional Chinese Medicine (TCM), the differences of TCM production industry between China and abroad were pointed out. Accelerating the application and extension of high-tech and computer integrated manufacturing system (CIMS) were suggested to promote the technology advancement of TCM industry.

FY04 Engineering Technology Reports Technology Base

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharpe, R M

2005-01-27

Lawrence Livermore National Laboratory's Engineering Directorate has two primary discretionary avenues for its investment in technologies: the Laboratory Directed Research and Development (LDRD) program and the ''Tech Base'' program. This volume summarizes progress on the projects funded for technology-base efforts in FY2004. The Engineering Technical Reports exemplify Engineering's more than 50-year history of researching and developing (LDRD), and reducing to practice (technology-base) the engineering technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence, and has prepared for this role with a skilled workforce and technicalmore » resources. This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply those technologies, or adapt them to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Tech Base projects effect the natural transition to reduction-to-practice of scientific or engineering methods that are well understood and established. They represent discipline-oriented, core competency activities that are multi-programmatic in application, nature, and scope. The objectives of technology-base funding include: (1) the development and enhancement of tools and processes to provide Engineering support capability, such as code maintenance and improved fabrication methods; (2) support of Engineering science and technology infrastructure, such as the installation or integration of a new capability; (3) support for technical and administrative leadership through our technology Centers; and (4) the initial scoping and exploration of selected technology areas with high strategic potential, such as assessment of university, laboratory, and industrial partnerships. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, focus and guide longer-term investments within Engineering. The Centers attract and retain top staff, develop and maintain critical core technologies, and enable programs. Through their technology-base projects, they oversee the application of known engineering approaches and techniques to scientific and technical problems. The Centers and their Directors are as follows: (1) Center for Computational Engineering: Robert M. Sharpe; (2) Center for Microtechnology and Nanotechnology: Raymond P. Mariella, Jr. (3) Center for Nondestructive Characterization: Harry E. Martz, Jr.; (4) Center for Precision Engineering: Keith Carlisle; and (5) Center for Complex Distributed Systems: Gregory J. Suski, Acting Director.« less

PREFACE: 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015)

NASA Astrophysics Data System (ADS)

Gaol, F. L.

2015-06-01

The 3rd International Conference on Science & Engineering in Mathematics, Chemistry and Physics 2015 (ScieTech 2015), was held at The Westin Resort Nusa Dua, Bali on 31 January - 1 February 2015. The ScieTech 2015 conference is aimed to bring together researchers, engineers and scientists from around the world. ScieTech 2015 is placed on promoting interaction between the theoretical, experimental, and applied communities, so that a high level exchange is achieved in new and emerging areas within mathematics, chemistry and physics. As we already know that science and technology have brought tremendous benefits for human civilization. People are becoming healthier, wealthier, better educated, more peaceful, increasingly connected, and living longer. Of course, science and technology provide many answers to global challenges, but we will face more complex problems in the next decade due to increasing world population, limitation of energy, and climate change. Therefore, researchers should be more active in conducting research that enables collaboration between one and the others. Interdisciplinary cooperation is absolutely necessary in order to create a smart system for solving the global problems. We need a global and general long-term view of the future with long-range goals for solving complex problems in next decade. Therefore the conference was held to be a forum for researchers from different disciplines to start collaborating and conducting research that provides a solution to the global issues. The theme of ScieTech 2015 was ''The interdisciplinary Application between Mathematics, Chemistry and Physics to enhance the Quality of Life''. We would like to express our sincere gratitude to all in the Technical Program Committee who have reviewed the papers and developed a very interesting conference program as well as the invited and plenary speakers. This year, we received 197 papers and after rigorous review, 59 papers were accepted. The participants came from 19 countries, and there were six paralell sessions and four keynote speakers. It is an honour to present this volume of Journal of Physics: Conference Series (JPCS) and we deeply thank the authors for their enthusiastic and high-grade contributions. Finally, we would like to thank the conference chairmen, members of the steering committee, the organizing committee, the organizing secretariat and the financial support from the conference sponsors that allowed the success of ScieTech 2015.

Special Feature: Teaching about High Tech.

ERIC Educational Resources Information Center

Kopf, Michael; And Others

1992-01-01

Includes four articles: "Virtual Reality" (Kopf), description of its uses in computer-assisted design, architecture, and technical training; "SME (Society of Manufacturing Engineers) Robotics Contest Opens Doors to Future" (Wagner); "Superconductivity" (Canady), description of classroom demonstrations and experiments;…

Teaching Heliophysics Science to Undergraduates in an Engineering Context

NASA Astrophysics Data System (ADS)

Baker, J. B.; Sweeney, D. G.; Ruohoniemi, J.

2013-12-01

In recent years, space research at Virginia Tech has experienced rapid growth since the initiation of the Center for Space Science and Engineering Research (Space@VT) during the summer of 2007. The Space@VT center resides in the College of Engineering and currently comprises approximately 30-40 faculty and students. Space@VT research encompasses a wide spectrum of science and engineering activities including: magnetosphere-ionosphere data analysis; ground- and space-based instrument development; spacecraft design and environmental interactions; and numerical space plasma simulations. In this presentation, we describe how Space@VT research is being integrated into the Virginia Tech undergraduate engineering curriculum via classroom instruction and hands-on group project work. In particular, we describe our experiences teaching a new sophomore course titled 'Exploration of the Space Environment' which covers a broad range of scientific, engineering, and societal aspects associated with the exploration and technological exploitation of space. Topics covered include: science of the space environment; space weather hazards and societal impacts; elementary orbital mechanics and rocket propulsion; spacecraft engineering subsystems; and applications of space-based technologies. We also describe a high-altitude weather balloon project which has been offered as a 'hands-on' option for fulfilling the course project requirements of the course.

Cost Reduction Through the Use of Additive Manufacturing (3d Printing) and Collaborative Product Life Cycle Management Technologies to Enhance the Navy’s Maintenance Programs

DTIC Science & Technology

2013-09-01

the order from the DLA; convenes a meeting with tech librarians , engineers, machinists, quality assurance (QA) inspectors, and mechanics to assess...created, begins the in-house process. 3. Research of Technical Drawings The tech librarian reviews the applicable repository for any tech drawings...applicable to Widget A. If none are found, the tech librarian contacts the OEM and other D-Level activities to find out whether the tech drawing is out

Corrosion Monitoring Research of New York City Bridges : TechBrief

DOT National Transportation Integrated Search

2013-12-01

Understanding unsaturated expansive soil has always been a major challenge for soil scientists and engineers. Due to presence of high quantity of montmorillonite mineral in the Moreland clay in northern Louisiana, structural damage due to soil heave/...

NASA Tech Briefs, March 1998. Volume 22, No. 3

NASA Technical Reports Server (NTRS)

1998-01-01

Topics include: special coverage of computer aided design and engineering, electronic components and circuits, electronic systems, physical sciences, materials, computer software, special coverage on mechanical technology, machinery/automation, manufacturing/fabrication, mathematics and information sciences, book and reports, and a special section of Electronics Tech Briefs. Profiles of the exhibitors at the National Design Engineering show are also included in this issue.

Floor Plans Rolling Platform, Tech Systems Platform, and Load ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Floor Plans - Rolling Platform, Tech Systems Platform, and Load Platform Plans - Marshall Space Flight Center, F-1 Engine Static Test Stand, On Route 565 between Huntsville and Decatur, Huntsville, Madison County, AL

NASA Tech Briefs, May 2002. Volume 26, No. 5

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on engineering materials, electronic components and circuits, software, mechanics, machinery/automation, manufacturing, physical sciences, information sciences, book and reports, and a special section of Photonics Tech Briefs.

Technological and cross-border mixture value chain of science and engineering of multi-integrative mechatronics-integronics-adaptronics

NASA Astrophysics Data System (ADS)

Gheorghe, Gh. Ion; Popan, Gheorghe

2013-10-01

This scientific paper presents in national premiere and in original concept of the author, the scientific national and the author's original concept, the technological and cross-border mixture value chain of science and engineering of multi-integrative Mechatronics-Integronics-Adaptronics, as high-tech vector support development, for viability and sustainability of a new intelligent and competitive labour market.

Integrating a Single Tablet PC in Chemistry, Engineering, and Physics Courses

ERIC Educational Resources Information Center

Rogers, James W.; Cox, James R.

2008-01-01

A tablet PC is a versatile computer that combines the computing power of a notebook with the pen functionality of a PDA (Cox and Rogers 2005b). The authors adopted tablet PC technology in order to improve the process and product of the lecture format in their chemistry, engineering, and physics courses. In this high-tech model, a single tablet PC…

Additive Transforms Paint into Insulation

NASA Technical Reports Server (NTRS)

2007-01-01

Tech Traders Inc. sought assistance developing low-cost, highly effective coatings and paints that created useful thermal reflectance and were safe and non-toxic. In cooperation with a group of engineers at Kennedy Space Center., Tech Traders created Insuladd, a powder additive made up of microscopic, inert gas-filled, ceramic microspheres that can be mixed into ordinary interior or exterior paint, allowing the paint to act like a layer of insulation. When the paint dries, this forms a radiant heat barrier, turning the ordinary house paint into heat-reflecting thermal paint. According to Tech Traders, the product works with all types of paints and coatings and will not change the coverage rate, application, or adhesion of the paint. Other useful applications include feed storage silos to help prevent feed spoilage, poultry hatcheries to reduce the summer heat and winter cold effects, and on military vehicles and ships. Tech Traders has continued its connection to the aerospace community by recently providing Lockheed Martin Corporation with one of its thermal products for use on the F-22 Raptor.

NASA Tech Briefs, November 2002. Volume 26, No. 11

NASA Technical Reports Server (NTRS)

2002-01-01

Topics include: a technology focus on engineering materials, electronic components and systems, software, mechanics, machinery/automation, manufacturing, bio-medical, physical sciences, information sciences book and reports, and a special section of Photonics Tech Briefs.

Concrete pavement construction basics : tech notes.

DOT National Transportation Integrated Search

2006-08-01

This tech note has been produced for developers, consultants, and engineers planning concrete pavement construction projects, superintendents and supervisors who want a basic training aid and reference, and crew members new to the concrete paving ind...

TACOM LCMC Industrial Base Engineering Support - Board of Directors

DTIC Science & Technology

2011-07-01

Hex Chrome Replacement (High Purity Aluminum) Capability o Advanced Aviation Forward Area Refueling System (AAFARS)Tech Data Development o Common...SIAD (As needed) Example Issues: • Hexavalent Chromium/Cadmium (RRAD) • Common Adhesive (ANAD) • AVLB Pressure Plate (ANAD) • Paladin Corrosion

Motivating Students with Robotics

ERIC Educational Resources Information Center

Brand, Brenda; Collver, Michael; Kasarda, Mary

2008-01-01

In recent years, the need to advance the number of individuals pursuing science, technology, engineering, and mathematics fields has gained much attention. The Montgomery County/Virginia Tech Robotics Collaborative (MCVTRC), a yearlong high school robotics program housed in an educational shop facility in Montgomery County, Virginia, seeks to…

Proceedings of Denver GeoTech '92

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roberts, C.A.

1992-01-01

This book contains proceedings of Denver Geo Tech '92. Topics covered include: practical ways to use microcomputers and workstations in geology, geophysics, environmental concerns, petroleum engineering, mining, hydrogeology, reclamation, microcomputers, state-of-the-art information on computer hardware, software, and services.

Schools Enlisting Defense Industry to Boost STEM

ERIC Educational Resources Information Center

Trotter, Andrew

2008-01-01

Defense contractors Northrop Grumman Corp. and Lockheed Martin Corp. are joining forces in an innovative partnership to develop high-tech simulations to boost STEM--or science, technology, engineering, and mathematics--education in the Baltimore County schools. The Baltimore County partnership includes the local operations of two major military…

A Conversation with Randy Asher, Principal of New York City's Brooklyn Technical High School

ERIC Educational Resources Information Center

Asher, Randy J.

2016-01-01

This is a conversation with Randy Asher, principal of New York City's Brooklyn Technical High School. Brooklyn Tech is a selective science high school in New York City, founded in 1922 as a school for boys with potential for careers in engineering and applied science. Today, it provides full-time education for both male and female students from…

Hariswaran Sitaraman | NREL

Science.gov Websites

pertaining to combustion and particulate flows. Education 2013 Ph.D., Aerospace Engineering, UT, Austin 2010 M.S., Aerospace Engineering, UT, Austin 2008 B. Tech, Aerospace Engineering, IIT Madras, Chennai

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile for computer-integrated manufacturing technology begins with definitions for four occupations: manufacturing technician, quality technician, mechanical engineering technician, and computer-assisted design/drafting (CADD) technician. A chart lists competencies by unit and indicates whether entire or partial unit is…

High School/High Tech: Promoting Career Exploration Technology for Youth with Learning Disabilities and Behavioral Disorders.

ERIC Educational Resources Information Center

Lemaire, Gail Schoen; Mallik, Kalisankar; Stoll, Bryan G.

2002-01-01

A model program to promote science, engineering, and technology careers and address academic and vocational needs of low-income youth with learning disabilities includes referral and intake processes and academic and career training and services. Of the 21 first-year participants, 13 were employed (7 in technology-related positions) or enrolled in…

The CNSE Public-Private Partnership Paradigm: A Driver for New York State and U.S. Educational, Research and Economic Excellence in the 21st Century

NASA Astrophysics Data System (ADS)

Cupoli, Edward M.

2009-10-01

The College of Nanoscale Science and Engineering (CNSE) of the University at Albany-SUNY is the first college in the world dedicated to education, research, development, and deployment in the emerging disciplines of nanoscience, nanoengineering, nanobioscience, and nanoeconomics. Envisioned and developed as a bold and unique educational, technological and business paradigm, the CNSE model has produced outcomes that are both significant and unparalleled: preparation of a highly educated, highly skilled workforce that is critical to driving opportunity and growth at all levels; acceleration of nanoscale research and development that is vital to advancing the commercialization of cutting-edge technologies and applications; and, generation of unmatched high-tech investment and job creation that are serving to foster a positive economic and societal impact throughout New York State, while also enhancing national competitiveness in the global innovation economy of the 21^st century. In less than a decade of operation, CNSE has become a globally recognized entity. CNSE's Albany NanoTech Complex is the most advanced research enterprise of its kind at any university in the world: a 5 billion, 800,000-square-foot complex that continuously attracts corporate partners from around the world, offers students a one-of-a-kind academic experience, and educates society on the implications of advances in nanotechnology. CNSE's Albany NanoTech houses the only fully-integrated 300mm wafer, computer chip pilot prototyping and demonstration line within 80,000 square feet of Class 1 capable cleanrooms. More than 2,500 scientists, researchers, engineers, students, and faculty work on site at CNSE's Albany NanoTech, with a network of global corporate partners that includes more than 250 leading nanotechnology companies, such as IBM, AMD, GlobalFoundries, SEMATECH, Toshiba, ASML, Applied Materials, Tokyo Electron, Vistec Lithography and Atotech, among many others.

Bibliography of Books and Published Reports on Gas Turbines, Jet Propulsion, and Rocket Power Plants, January 1950 through December 1953

DTIC Science & Technology

1953-12-01

Vt. J. V. Casamassa, Jet aircraft power systems . McGraw-Hill, New York. C. C. Chapel, Jet aircraft simplified. Aero Pubs. Inc., Los Angeles. V. C...combination. NACA Tech. Note No. 1951 (Sept.). A. F. Lietzke and H. M. Henneberry, Evaluation of piston-type gas- generator engine for subsonic transport...Dynamics of a turbojet engine considered as a quasi-static system . NACA Tech. Note No. 2091 (May). A. E. Puckett, Optimum performance of rocket- powered

Biotechnology Process Engineering Center at MIT Home

Science.gov Websites

Bioengineering / Engineering Research Centers Georgia Tech / Emory Center for the Engineering of Living Tissues University of Washington / Engineered Biomaterials Engineering Research Center Vanderbilt University / VaNTH Surgical Systems and Technology Univesity of Hawaii / Marine Bioproducts Engineering Center Funding Sources

Christopher Kinchin | NREL

Science.gov Websites

Kinchin Photo of Christopher Kinchin Christopher Kinchin Researcher III-Chemical Engineering . Education B.S., Chemical Engineering, Texas Tech University M.S., Chemical Engineering, University of North

Integrated design and manufacturing for the high speed civil transport

NASA Technical Reports Server (NTRS)

1993-01-01

In June 1992, Georgia Tech's School of Aerospace Engineering was awarded a NASA University Space Research Association (USRA) Advanced Design Program (ADP) to address 'Integrated Design and Manufacturing for the High Speed Civil Transport (HSCT)' in its graduate aerospace systems design courses. This report summarizes the results of the five courses incorporated into the Georgia Tech's USRA ADP program. It covers AE8113: Introduction to Concurrent Engineering, AE4360: Introduction to CAE/CAD, AE4353: Design for Life Cycle Cost, AE6351: Aerospace Systems Design One, and AE6352: Aerospace Systems Design Two. AE8113: Introduction to Concurrent Engineering was an introductory course addressing the basic principles of concurrent engineering (CE) or integrated product development (IPD). The design of a total system was not the objective of this course. The goal was to understand and define the 'up-front' customer requirements, their decomposition, and determine the value objectives for a complex product, such as the high speed civil transport (HSCT). A generic CE methodology developed at Georgia Tech was used for this purpose. AE4353: Design for Life Cycle Cost addressed the basic economic issues for an HSCT using a robust design technique, Taguchi's parameter design optimization method (PDOM). An HSCT economic sensitivity assessment was conducted using a Taguchi PDOM approach to address the robustness of the basic HSCT design. AE4360: Introduction to CAE/CAD permitted students to develop and utilize CAE/CAD/CAM knowledge and skills using CATIA and CADAM as the basic geometric tools. AE6351: Aerospace Systems Design One focused on the conceptual design refinement of a baseline HSCT configuration as defined by Boeing, Douglas, and NASA in their system studies. It required the use of NASA's synthesis codes FLOPS and ACSYNT. A criterion called the productivity index (P.I.) was used to evaluate disciplinary sensitivities and provide refinements of the baseline HSCT configuration. AE6352: Aerospace Systems Design Two was a continuation of Aerospace Systems Design One in which wing concepts were researched and analyzed in more detail. FLOPS and ACSYNT were again used at the system level while other off-the-shelf computer codes were used for more detailed wing disciplinary analysis and optimization. The culmination of all efforts and submission of this report conclude the first year's efforts of Georgia Tech's NASA USRA ADP. It will hopefully provide the foundation for next year's efforts concerning continuous improvement of integrated design and manufacturing for the HSCT.

GT-SUPREEM: the Georgia Tech summer undergraduate packaging research and engineering experience for minorities

NASA Astrophysics Data System (ADS)

May, Gary S.

1996-07-01

The Georgia Tech SUmmer Undergraduate Packaging Research and Engineering Experience for Minorities (GT-SUPREEM) is an eight-week summer program designed to attract qualified minority students to pursue graduate degrees in packaging- related disciplines. The program is conducted under the auspices of the Georgia Tech Engineering Research Center in Low-Cost Electronic Packaging, which is sponsored by the National Science Foundation. In this program, nine junior and senior level undergraduate students are selected on a nationwide basis and paired with a faculty advisor to undertake research projects in the Packaging Research CEnter. The students are housed on campus and provided with a $DLR3,000 stipend and a travel allowance. At the conclusion of the program, the students present both oral and written project summaries. It is anticipated that this experience will motivate these students to become applicants for graduate study in ensuring years. This paper will provide an overview of the GT-SUPREEM program, including student research activities, success stories, lessons learned, and overall program outlook.

High-temperature optical fiber instrumentation for gas flow monitoring in gas turbine engines

NASA Astrophysics Data System (ADS)

Roberts, Adrian; May, Russell G.; Pickrell, Gary R.; Wang, Anbo

2002-02-01

In the design and testing of gas turbine engines, real-time data about such physical variables as temperature, pressure and acoustics are of critical importance. The high temperature environment experienced in the engines makes conventional electronic sensors devices difficult to apply. Therefore, there is a need for innovative sensors that can reliably operate under the high temperature conditions and with the desirable resolution and frequency response. A fiber optic high temperature sensor system for dynamic pressure measurement is presented in this paper. This sensor is based on a new sensor technology - the self-calibrated interferometric/intensity-based (SCIIB) sensor, recently developed at Virginia Tech. State-of-the-art digital signal processing (DSP) methods are applied to process the signal from the sensor to acquire high-speed frequency response.

Mechatronics education at Virginia Tech

NASA Astrophysics Data System (ADS)

Bay, John S.; Saunders, William R.; Reinholtz, Charles F.; Pickett, Peter; Johnston, Lee

1998-12-01

The advent of more complex mechatronic systems in industry has introduced new opportunities for entry-level and practicing engineers. Today, a select group of engineers are reaching out to be more knowledgeable in a wide variety of technical areas, both mechanical and electrical. A new curriculum in mechatronics developed at Virginia Tech is starting to bring students from both the mechanical and electrical engineering departments together, providing them wit an integrated perspective on electromechanical technologies and design. The course is cross-listed and team-taught by faculty from both departments. Students from different majors are grouped together throughout the course, each group containing at least one mechanical and one electrical engineering student. This gives group members the ability to learn from one another while working on labs and projects.

Effective Partnership between Public Education and Private Industry.

ERIC Educational Resources Information Center

Smith, Sue Griffith; Beatty, David

From the perspectives of both school and industry, this paper outlines the past, present, and future of a partnership between Ivy Tech State College (Columbus, Indiana) and Cummins Engine Company and other local industries formed to provide the southern Indiana area with a highly skilled workforce. First, David Beatty traces on-the-job training at…

Rev Your Engines!

ERIC Educational Resources Information Center

Blanchard, Margaret; Sharp, Jennifer; Grable, Lisa

2009-01-01

As part of the "Car Lab Project," students constructed rubber band cars, raced them, and worked through a number of automotive activities. The students engaged in this project certainly had fun, but they also used high-tech gear such as motion sensors and graphing calculators to gather data on the distance and time cars traveled and to generate…

Problem Reporting Taxonomy and Data Preparation Tool Evaluation

NASA Technical Reports Server (NTRS)

Beil, Robert J.

2010-01-01

A member of the NASA Engineering and Safety Center (NESC) Systems Engineering Office (SEO) Technical Discipline Team (TDT) requested a SEO-managed activity to perform a gap analysis on the proposed NASA Standard 0006, "Common NASA Taxonomy for Problem Reporting, Analysis, and Resolution", and to create an input filter and set of instructions for using the data-mining/data-cleansing tool TechOasis1 with Space Shuttle Program (SSP) problem reporting data. The work that achieved these objectives and deployment of TechOasis are discussed in this report.

Innovation Engine

ERIC Educational Resources Information Center

Stuart, Reginald

2012-01-01

This article describes how Wayne State University's TechTown is helping revive Detroit's hard-hit economy. TechTown got its start when then-Wayne State President Irvin Reid and a small group of business leaders in the city and state officials decided Detroit needed to embrace the business incubator idea that had been so successful in other regions…

On the Right Track: Southern Maryland Schools Revamp Their Curriculum around Tech Prep.

ERIC Educational Resources Information Center

Leftwich, Kathy

1992-01-01

In St. Mary's County (Maryland) schools' revamped curriculum, tech prep encompasses four clusters: applied business/management, applied engineering/mechanics, applied health/human services, and college prep. Career counselors help eighth graders choose a cluster and monitor their satisfaction with their choice, allowing them to change until junior…

NASA Tech House: An early evaluation

NASA Technical Reports Server (NTRS)

1977-01-01

An architect-engineering firm, as well as university participants, performed system studies, evaluated construction methods, performed cost effectiveness studies, and prepared construction drawings which incorporated the selected technology features into a final design. A Technology Utilization House (Tech House) based on this design was constructed at the NASA Langley Research Center in Hampton, Virginia. The Tech House is instrumented so that the performance of the design features and energy systems can be evaluated during a planned family live-in period. As such, the house is both a demonstration unit and a research laboratory. The Tech House is to demonstrate the kind of single-family residence that will probably be available within the next five years.

These Kids Are Really on the Ball! Invention Competition Winners

ERIC Educational Resources Information Center

Tech Directions, 2008

2008-01-01

Judge Harry T. Roman, an electrical engineer and inventor himself, has selected the best entries in the 2007-2008 "Tech Directions" Inventors Award Competition. This year's challenge called for students to devise new uses for the common Ping-Pong ball. Of the results, the judge notes "The ideas submitted were most interesting, with a high number…

Why Work with Undergraduate Researchers? Differences in Research Advisors' Motivations and Outcomes by Career Stage

ERIC Educational Resources Information Center

Hayward, Charles N.; Laursen, Sandra L.; Thiry, Heather

2017-01-01

Undergraduate research is often hailed as a solution to increasing the number and quality of science, technology, engineering, and mathematics graduates needed to fill the high-tech jobs of the future. Student benefits of research are well documented but the emerging literature on advisors' perspectives is incomplete: only a few studies have…

Immigration Research for a New Century: Multidisciplinary Perspective.

ERIC Educational Resources Information Center

Foner, Nancy, Ed.; Rumbaut, Ruben G., Ed.; Gold, Steven J., Ed.

This book presents research on the post-1965 wave of immigrants to the United States by a new generation of immigration scholars. The 20 papers, which come from a 1998 conference, cover groups ranging from high-tech engineers in Silicon Valley to Sudanese Nuer refugees in Minnesota. Many studies report novel findings and fresh interpretations. The…

Encouraging Girls into Science and Technology with Feminine Role Model: Does This Work?

ERIC Educational Resources Information Center

Bamberger, Yael M.

2014-01-01

This study examines the effect of a program that aimed to encourage girls to choose a science, technology, engineering, and mathematics (STEM) career in Israel. The program involved school visits to a high-tech company and meeting with role model female scientists. Sixty ninth-grade female students from a Jewish modern-orthodox single-sex…

The ORNL Chemical Technology Division, 1950-1994

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jolley, R.L.; Genung, R.K.; McNeese, L.E.

1994-10-01

This document attempts to reconstruct the role played by the Chemical Technology Division (Chem Tech) of the Oak Ridge National Laboratory (ORNL) in the atomic era since the 1940`s related to the development and production of nuclear weapons and power reactors. Chem Tech`s early contributions were landmark pioneering studies. Unknown and dimly perceived problems like chemical hazards, radioactivity, and criticality had to be dealt with. New chemical concepts and processes had to be developed to test the new theories being developed by physicists. New engineering concepts had to be developed and demonstrated in order to build facilities and equipment thatmore » had never before been attempted. Chem Tech`s role was chemical separations, especially uranium and plutonium, and nuclear fuel reprocessing. With diversification of national and ORNL missions, Chem Tech undertook R&D studies in many areas including biotechnology; clinical and environmental chemistry; nuclear reactors; safety regulations; effective and safe waste management and disposal; computer modeling and informational databases; isotope production; and environmental control. The changing mission of Chem Tech are encapsulated in the evolving activities.« less

Research on the competitiveness of high-tech industries in northeast China

NASA Astrophysics Data System (ADS)

Liu, Lei; Wang, Yang; Wang, Ming-Quan; Xiao, Yan-Bo; Gao, Ming

2017-06-01

Based on characteristics of high-tech industry in Northeast China, high-tech industry competitiveness index system was developed, and the competitiveness of high-tech industry was evaluated through principal component analysis and location quotient method. The results showed that the scale of high-tech industry in Northeast China as a whole was small, and presented a decreasing trend for the proportion in the country. The competitiveness of high-tech industry in Northeast China lagged far behind that of the eastern and central regions. The high-tech industry competitiveness of Liaoning, Jilin and Heilongjiang provinces in China ranked 15, 19 and 21, respectively. The manufacture of medicine in Jilin province, and the manufacture of aircraft and spacecraft and the related equipment in Liaoning and Heilongjiang provinces had high competitive advantage, but the manufacture of electronic equipment and communication equipment and the manufacture of computers and office equipment was lack of competitiveness. The development suggestions were put forward to improve the competitiveness of high-tech industries in Northeast China.

EnviroTech: Enhancing Environmental Literacy and Technology Assessment Skills

ERIC Educational Resources Information Center

Rose, Mary Annette

2010-01-01

It is no coincidence that many of the "Grand Challenges for Engineering" (National Academy of Engineering, 2007-2010)--such as carbon sequestration--address environmental problems that were precipitated by human inventiveness and engineering achievements. Although people recognize their dependence upon environmental processes to provide…

Hydrologic Engineering Center: A Quarter Century 1964-1989

DTIC Science & Technology

1989-01-01

consisted of an engineering tech- nician, a mathematician, four hydraulic engineers and a clerk- steno . During the last 25 years, staff members have...McPherson Jack Dangermond John Lager Don Hey Clarence Korhonen Harry Schwarz James Wright John J. Buckley Mike Savage Nicholas Lally Ralph

A strategy to assist management in workforce engagement and employee retention in the high tech engineering environment.

PubMed

Kennedy, Elizabeth; Daim, Tugrul U

2010-11-01

Many companies use survey methods in an attempt to gauge employees' attitudes and opinions toward the company. These attitudes and opinions are directly related to an employee's engagement within the company. In many instances, employees wait in vain for the survey response and the subsequent employer actions, but the truth is sometimes management does not know what to do with the results. For this reason, we theorize that this type of survey, typically utilizing the Likert-scale, is not adequately assisting management in addressing employee engagement and retention issues. For instance, in many occasions, once the survey results are tabulated, companies are doing little or nothing to address the issues. In fact, far too many companies make the mistake of conducting employee engagement surveys, and then ignore the answers. Thus, we propose that a company should take advantage of the survey results, and utilize them to provide data to bridge employees' needs and goals with stakeholders' responsibilities and goals by refining and incorporating them into a hierarchical decision model (HDM). Thus, this would essentially be utilizing the quantitative data to determine what to measure qualitatively. We use a case from the high tech industry, specifically focusing on the engineering environment. Engineering environments are known to be more creative and such approaches would be more beneficial. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

The Design and Evolution of the Akamai Workforce Initiative: An External Review

ERIC Educational Resources Information Center

St. John, Mark; Castori, Pam

2014-01-01

The Akamai Workforce Initiative (AWI) is a program that seeks to develop a skilled local STEM workforce to meet the needs of Hawai'i's growing high-tech industry. Launched as an internship program in 2002, AWI is the result of a long-term collaboration among the University of California Santa Cruz's Institute for Scientist and Engineer Educators…

MEDISIGN: Educating designers for the operating room.

PubMed

Goossens; Lange; Kleinrensink

2004-06-01

One of the interesting things about medical technology is that it addresses so many diverse subjects, which is indeed the case in all departments of a hospital, in general practice and in other care agencies. Medical technology contributes to the diagnosis, treatment and prevention of disease and disorders. Designing for medical applications demands a high level of creativity and inventivity, both in low-tech and in high-tech applications. In over 200 projects with hospitals and companies in the medical field the Delft industrial designer has therefore played an important part in designing innovative products [1]. In the new program Medisign the expertise and networks that have been built up in this area over the past 20 years are being passed on to students. The program is based upon the idea that education of engineers in human anatomy, physiology, medical technoloy, health care systems and even basic surgical techniques will lead to better communication with the medical professionals and to better design solutions in this area. To our knowledge this is the first initiative in Europe in which structural education in anatomy is offered to industrial design engineers.

75 FR 11917 - Chrysler LLC, Technology Center, Including On-Site Leased Workers from Aerotek, Ajilon, Altair...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-12

..., Cer-Cad Engineering Resources, Computer Consultants of America, Computer Engrg Services, Compuware..., Automated Analysis Corp/Belcan, Bartech Group, CAE Tech, CDI Information Services, CER-CAD Engineering...

Systems Engineering Publications | Wind | NREL

Science.gov Websites

Different Turbine Heights. AIAA SciTech Forum: 35th Wind Energy Symposium, Grapevine, Texas, doi:10.2514 Tool for Variable-Speed Wind Turbine Generators. NREL/TP-5000-66462, doi:10.2514/6.2017-1619. Seturaman Turbine using GeneratorSE. AIAA SciTech Forum: 35th Wind Energy Symposium, Grapevine, Texas, doi:10.2172

Environmental Impact Research Program. Proceedings of the US Army Corps of Engineers Riparian Zone Restoration and Management Workshop Held in San Antonio, Texas on 24-27 February 1986

DTIC Science & Technology

1988-02-01

Dwayne G. Lee, CE, was Commander and Director of WES. Dr. Robert W. Whalin was Technical Director. This report should be cited as follows: Martin, Chester...Environmental features for streambank protection projects. U.S. Army Eng. Waterways Exp. Sta., Tech. Rep. E-84-11. 150 pp. Johnson , R. R., and D. A. Jones...Serv. Gen. Tech. Rep. RM-43. 217 pp. 57 Johnson , R. R., and J. F. McCormick (tech. coords.). 1978. Strategies for protection and management of

David Mooney | NREL

Science.gov Websites

: Institute of Electrical and Electronics Engineers (IEEE). NREL/CP-5500-54165. doi:10.1109/EnergyTech 2011. Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE). NREL/CP-5500-53565. doi Electrical and Electronics Engineers (IEEE). NREL/CP-550-47061. doi:10.1109/pes.2009.5275358 Mooney, D., M

Incorporating Six Sigma Methodology Training into Chemical Engineering Education

ERIC Educational Resources Information Center

Dai, Lenore L.

2007-01-01

Six Sigma is a buzz term in today's technology and business world and there has been increasing interest to initiate Six Sigma training in college education. We have successfully incorporated Six Sigma methodology training into a traditional chemical engineering course, Engineering Experimentation, at Texas Tech University. The students have…

Innovative Design of Complex Engineering Systems

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler)

2004-01-01

The document contains the proceedings of the training workshop on Innovative Design of Complex Engineering Systems. The workshop was held at the Peninsula Higher Education Center, Hampton, Virginia, March 23 and 24, 2004. The workshop was jointly sponsored by Old Dominion University and NASA. Workshop attendees came from NASA, other government agencies, industry and universities. The objectives of the workshop were to a) provide broad overviews of the diverse activities related to innovative design of high-tech engineering systems; and b) identify training needs for future aerospace work force development in the design area. The format of the workshop included fifteen, half-hour overview-type presentations, a panel discussion on how to teach and train engineers in innovative design, and three exhibits by commercial vendors.

Design of an Advanced Modular Automated Evaluation System for Experimental High Power SGTOS

DTIC Science & Technology

2013-06-01

POWER SGTOS Shelby Lacouture, Kevin Lawson, Stephen Bayne, Michael Giesselmann, Heather O’Brien 1 , Aderinto Ogunniyi 1 , Charles J...Travis T. Vollmer and Michael G. Giesselmann, Rapid Capacitor Charging Power Supply for an 1800J PFN, Proceedings of the 2012 Power Modulator and High Voltage Conference, San Diego, CA, June 3-7, 2012. 1023 ...Scozzie 1 Center for Pulsed Power and Power Electronics Department of Electrical & Computer Engineering Texas Tech

Electronic Collection Management and Electronic Information Services

DTIC Science & Technology

2004-12-01

federated search tools are still being perfected with much debate surrounding their use. Encouragingly, as the federated search tools have evolved...institutional repositories to be included in a federated search process, libraries would have to harvest the metadata from the repositories and then make...providers in Library High Tech News. At this time, federated search engines serve some user groups better than others. Undergraduate students are well

Chemical Technology Division: Progress report, January 1, 1987--June 30, 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1989-02-01

This progress report summarizes the research and development efforts conducted in the Chemical Technology Division (Chem Tech) during the period January 1, 1987, to June 30, 1988. The following major areas are covered: waste management and environmental programs, radiochemical and reactor engineering programs, basic science and technology, Nuclear Regulatory Commission programs, and administrative resources and facilities. The Administrative Summary, an appendix, presents a comprehensive listing of publications, oral presentations, awards and recognitions, and patents of Chem Tech staff members during this period. A staffing level and financial summary and lists of seminars and Chem Tech consultants for the period aremore » also included.« less

75 FR 7342 - Airworthiness Directives; SICLI Halon 1211 Portable Fire Extinguishers as Installed on Various...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-19

... INFORMATION CONTACT: For transport airplanes: Dan Rodina, Aerospace Engineer, International Branch, ANM-116...) 227-2125; fax (425) 227-1149. For small airplanes: Leslie B. Taylor, Aerospace Engineer, Standards... concern. The results of the ongoing investigation have now established that LyonTech Engineering Ltd, a UK...

Engineering Technologies. State Competency Profile.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. Center on Education and Training for Employment.

This document contains 397 competencies, grouped into 58 units, for tech prep programs in the engineering technologies cluster. The competencies were developed through collaboration of Ohio business, industry, and labor representatives and secondary and associate degree educators. The competencies are rated either "essential" (necessary…

Prize for Industrial Applications of Physics Lecture: A physicist in Business

NASA Astrophysics Data System (ADS)

Woollam, John

2013-03-01

In the 1980s I inherited a famous ellipsometry laboratory. To speed up data acquisition and analysis I associated myself with creative scientists and engineers. We started a company which grew. Together we rapidly improved acquisition speed, accuracy, precision, spectral range, and types of applications. Yet, a business is much more than technology. In this talk I outline how a high-tech business functions, and illustrate the role of physicists and engineers in making a company successful. It is fast-paced, exciting, and enormously gratifying to provide quality instruments for researchers and industry.

Sensory Perception in the Human Research and Engineering Directorate: Thrust Areas and Recent Research 2011-2014

DTIC Science & Technology

2014-09-01

estimation in an open space. In: Glotin, editor. Soundscape semiotics: localisation and categorisation. Rijeka (Croatia): InTech; 2014. Available at...Glotin H, editor. Soundscape semiotics – localisation and categorisation. Rijeka (Croatia): InTech; 2014. Available at: http://www.intechopen.com...books/ soundscape -semiotics-localisation -and-categorisation/auditory-distance-estimation-in-an-open-space. The purpose of the study was to expand our

Adapted managerial mathematical model to study the functions and interactions between enterprises in high-tech cluster

NASA Astrophysics Data System (ADS)

Anguelov, Kiril P.; Kaynakchieva, Vesela G.

2017-12-01

The aim of the current study is to research and analyze Adapted managerial mathematical model to study the functions and interactions between enterprises in high-tech cluster, and his approbation in given high-tech cluster; to create high-tech cluster, taking into account the impact of relationships between individual units in the cluster-Leading Enterprises, network of Enterprises subcontractors, economic infrastructure.

Technology 2001: The Second National Technology Transfer Conference and Exposition, volume 2

NASA Technical Reports Server (NTRS)

1991-01-01

Proceedings of the workshop are presented. The mission of the conference was to transfer advanced technologies developed by the Federal government, its contractors, and other high-tech organizations to U.S. industries for their use in developing new or improved products and processes. Volume two presents papers on the following topics: materials science, robotics, test and measurement, advanced manufacturing, artificial intelligence, biotechnology, electronics, and software engineering.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Svetlana Shasharina

The goal of the Center for Technology for Advanced Scientific Component Software is to fundamentally changing the way scientific software is developed and used by bringing component-based software development technologies to high-performance scientific and engineering computing. The role of Tech-X work in TASCS project is to provide an outreach to accelerator physics and fusion applications by introducing TASCS tools into applications, testing tools in the applications and modifying the tools to be more usable.

Benchmarking and Hardware-In-The-Loop Operation of a 2014 MAZDA SkyActiv (SAE 2016-01-1007)

EPA Science Inventory

Engine Performance evaluation in support of LD MTE. EPA used elements of its ALPHA model to apply hardware-in-the-loop (HIL) controls to the SKYACTIV engine test setup to better understand how the engine would operate in a chassis test after combined with future leading edge tech...

Longitudinal analysis of high-technology medical services and hospital financial performance.

PubMed

Zengul, Ferhat D; Weech-Maldonado, Robert; Ozaydin, Bunyamin; Patrician, Patricia A; OʼConnor, Stephen J

U.S. hospitals have been investing in high-technology medical services as a strategy to improve financial performance. Despite the interest in high-tech medical services, there is not much information available about the impact of high-tech services on financial performance. The aim of this study was to examine the impact of high-tech medical services on financial performance of U.S. hospitals by using the resource-based view of the firm as a conceptual framework. Fixed-effects regressions with 2 years lagged independent variables using a longitudinal panel sample of 3,268 hospitals (2005-2010). It was hypothesized that hospitals with rare or large numbers (breadth) of high-tech medical services will experience better financial performance. Fixed effects regression results supported the link between a larger breadth of high-tech services and total margin, but only among not-for-profit hospitals. Both breadth and rareness of high-tech services were associated with high total margin among not-for-profit hospitals. Neither breadth nor rareness of high-tech services was associated with operating margin. Although breadth and rareness of high-tech services resulted in lower expenses per inpatient day among not-for-profit hospitals, these lower costs were offset by lower revenues per inpatient day. Enhancing the breadth of high-tech services may be a legitimate organizational strategy to improve financial performance, especially among not-for-profit hospitals. Hospitals may experience increased productivity and efficiency, and therefore lower inpatient operating costs, as a result of newer technologies. However, the negative impact on operating revenue should caution hospital administrators about revenue reducing features of these technologies, which may be related to the payer mix that these technologies may attract. Therefore, managers should consider both the cost and revenue implications of these technologies.

Ohio Engineering Technologies Competency Profile.

ERIC Educational Resources Information Center

Miller, Lavonna; Draeger, Meg; Bowermeister, Bob; Wancho, Richard

This document, which lists engineering technologies competencies as identified by representatives from business and industry as well as secondary and post-secondary educators throughout Ohio, is intended to assist individuals and organizations in developing college tech prep programs that will prepare students from secondary through post-secondary…

Project Georgia High School/High Tech

NASA Technical Reports Server (NTRS)

2000-01-01

The High School/High Tech initiative of the President's Committee on Employment of Disabilities, Georgia's application of the collaborative "Georgia Model" and NASA's commitment of funding have shown that opportunities for High School/High Tech students are unlimited. In Georgia, the partnership approach to meeting the needs of this program has opened doors previously closed. As the program grows and develops, reflecting the needs of our students and the marketplace, more opportunities will be available. Our collaboratives are there to provide these opportunities and meet the challenge of matching our students with appropriate education and career goals. Summing up the activities and outcomes of Project Georgia High School/High Tech is not difficult. Significant outcomes have already occurred in the Savannah area as a result of NASA's grant. The support of NASA has enabled Georgia Committee to "grow" High School/High Tech throughout the region-and, by example, the state. The success of the Columbus pilot project has fostered the proliferation of projects, resulting in more than 30 Georgia High School High Tech programs-with eight in the Savannah area.

Digital Logistics

DTIC Science & Technology

2000-03-17

There will also be instances when we will need to take advantage of technological leaps made by our allies. The ’clash’ of high tech with low tech ...must be considered, especially as we move toward very high tech solutions to our military needs. The end goal is to create Army Forces that are...effect that science and technology today distort the military by substituting high - tech weapons that do not always work for more basic military

Evaluation of an Ejector Ramjet Based Propulsion System for Air-Breathing Hypersonic Flight

NASA Technical Reports Server (NTRS)

Thomas, Scott R.; Perkins, H. Douglas; Trefny, Charles J.

1997-01-01

A Rocket Based Combined Cycle (RBCC) engine system is designed to combine the high thrust to weight ratio of a rocket along with the high specific impulse of a ramjet in a single, integrated propulsion system. This integrated, combined cycle propulsion system is designed to provide higher vehicle performance than that achievable with a separate rocket and ramjet. The RBCC engine system studied in the current program is the Aerojet strutjet engine concept, which is being developed jointly by a government-industry team as part of the Air Force HyTech program pre-PRDA activity. The strutjet is an ejector-ramjet engine in which small rocket chambers are embedded into the trailing edges of the inlet compression struts. The engine operates as an ejector-ramjet from takeoff to slightly above Mach 3. Above Mach 3 the engine operates as a ramjet and transitions to a scramjet at high Mach numbers. For space launch applications the rockets would be re-ignited at a Mach number or altitude beyond which air-breathing propulsion alone becomes impractical. The focus of the present study is to develop and demonstrate a strutjet flowpath using hydrocarbon fuel at up to Mach 7 conditions.

Multidisciplinary Design and Analysis for Commercial Aircraft

NASA Technical Reports Server (NTRS)

Cummings, Russell M.; Freeman, H. JoAnne

1999-01-01

Multidisciplinary design and analysis (MDA) has become the normal mode of operation within most aerospace companies, but the impact of these changes have largely not been reflected at many universities. On an effort to determine if the emergence of multidisciplinary design concepts should influence engineering curricula, NASA has asked several universities (Virginia Tech, Georgia Tech, Clemson, BYU, and Cal Poly) to investigate the practicality of introducing MDA concepts within their undergraduate curricula. A multidisciplinary team of faculty, students, and industry partners evaluated the aeronautical engineering curriculum at Cal Poly. A variety of ways were found to introduce MDA themes into the curriculum without adding courses or units to the existing program. Both analytic and educational tools for multidisciplinary design of aircraft have been developed and implemented.

Studies of Heat Transfer in Complex Internal Flows.

DTIC Science & Technology

1982-01-01

D.C. 20362 (Tel 202-692-6874) Mr. Richard S. Carlton Director, Engines Division, Code 523 NC #4 Naval Sea Systems Command Washington, D.C. 20362...Walter Ritz Code 033C Naval Ships Systems Engineering Station Philadelphia, Pennsylvania 19112 (Tel. 215-755-3841) Dr. Simion Kuo United Tech. Res

Critical materials: a reason for sustainable education of industrial designers and engineers

NASA Astrophysics Data System (ADS)

Köhler, Andreas R.; Bakker, Conny; Peck, David

2013-08-01

Developed economies have become highly dependent on a range of technology metals with names such as neodymium and terbium. Stakeholders have warned of the impending scarcity of these critical materials. Difficulties in materials supply can affect the high-tech industries as well as the success of sustainable innovation strategies that are based on sophisticated technology. Industrial designers and engineers should therefore increase their awareness of the limits in availability of critical materials. In this paper, it is argued that materials' criticality can give a fresh impetus to the higher education of industrial design engineers. It is important to train future professionals to apply a systems perspective to the process of technology innovation, enabling them to thrive under circumstances of constrained material choices. The conclusions outline ideas on how to weave the topic into existing educational programmes of future technology developers.

NASA Tech Briefs, May 2000. Volume 24, No. 5

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: Sensors: Test and Measurement; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Composites and Plastics; Materials; Computer Programs; Mechanics;

NASA Tech Briefs, June 2000. Volume 24, No. 6

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Test and Measurement; Physical Sciences; Materials; Computer Programs; Computers and Peripherals;

Georgia Institute of Technology chilled water system evaluation and master plan

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-05-15

As the host of the Olympic Village for the 1996 Atlanta Olympics, Georgia Tech has experienced a surge in construction activities over the last three years. Over 1.3 million square feet of new buildings have been constructed on the Georgia Tech campus. This growth has placed a strain on the Georgia Tech community and challenged the facilities support staff charged with planning and organizing utility services. In concert with Olympic construction, utility planners have worked to ensure long term benefits for Georgia Tech facilities while meeting the short term requirements of the Olympic Games. The concentration of building construction inmore » the northwest quadrant of the campus allowed planners to construct a satellite chilled water plant to serve the needs of this area and provide the opportunity to integrate this section of the campus with the main campus chilled water system. This assessment and master plan, funded in part by the US Department of Energy, has evaluated the chilled water infrastructure at Georgia Tech, identified ongoing problems and made recommendations for long term chilled water infrastructure development and efficiency improvements. The Georgia Tech office of Facilities and RDA Engineering, Inc. have worked together to assemble relevant information and prepare the recommendations contained in this document.« less

Project Georgia High School/High Tech

NASA Technical Reports Server (NTRS)

2000-01-01

Georgia High School/High Tech has been developing a suggested curriculum for use in its programs. The purpose of this instructional material is to provide a basic curriculum format for teachers of High School/High Tech students. The curriculum is designed to implement QCC classroom instruction that encourages career development in technological fields through post-secondary education, paid summer internships, and exposure to experiences in high technology.

High School/High Tech Program Guide: An Implementation Guide for High School/High Tech Program Coordinators. Promoting Careers in Science and Technology for High School Students with Disabilities.

ERIC Educational Resources Information Center

Office of Disability Employment Policy (DOL), Washington, DC.

This implementation guide is intended to assist educators in planning, establishing, building, and managing a High School/High Tech project for high school students with disabilities. The program is designed to develop career opportunities, provide activities that will spark an interest in high technology fields, and encourage students to pursue…

Minimizing Security Vulnerabilities in High-Tech Classrooms

ERIC Educational Resources Information Center

Ozkan, Betul C.; Gunay, Vedat

2004-01-01

Emerging technologies are quickly becoming part of daily learning and teaching endeavors in academia. Due to the access to certain high-tech tools educators must learn how to integrate these tools in educational settings. However, many also encounter problems and weaknesses in the same high-tech environment that uses and delivers information…

Design Tech High School: d.tech

ERIC Educational Resources Information Center

EDUCAUSE, 2015

2015-01-01

A Bay Area charter high school, d.tech develops "innovation-ready" students by combining content knowledge with the design thinking process while fostering a sense of autonomy and purpose. The academic model is grounded in self-paced learning through a flex schedule, high standards, and design thinking through a four-year design…

Iowa High School High Tech: Promoting Careers in Technology for Students with Disabilities. Final Report and Implementation Manual.

ERIC Educational Resources Information Center

McQuillen, Terry; Nietupski, John; Berg, Deana Duncan; Daugherty, Vicki; Bildstein, Stephanie

This final report and implementation manual describes the activities and outcomes of Iowa's High School High Tech (HSHT) program, a joint effort of Grant Wood Area Education Agency and Goodwill Industries of Southeast Iowa to inspire students with disabilities to pursue high tech careers. The program provides opportunities for students to learn…

University of Maryland MRSEC - Collaborations

Science.gov Websites

. University of Maryland Materials Research Science and Engineering Center Home About Us Leadership , National Nanotechnology Lab, Neocera, NIST, Rowan University, Rutgers University, Seagate, Tokyo Tech

PREFACE: Modern Technologies in Industrial Engineering (ModTech2015)

NASA Astrophysics Data System (ADS)

Oanta, E.; Comaneci, R.; Carausu, C.; Placzek, M.; Cohal, V.; Topala, P.; Nedelcu, D.

2015-11-01

The dominant feature of the current stage of society development is the update, refinement and innovation of the technological processes and products whose ultimate goal is to satisfy the market requirements. New and modern technologies should be considered in terms of their applicability in industry while the materials can lead to an increase in the quality of the end products. Replacing the existing technologies with innovative and eco-efficient technologies can contribute to an added value increase in the production of new materials. Materials are one of the most dynamic and prospective fields, with applications in all other fields. The development of new advanced materials and technologies shall contribute to the procurement of a wide range of reliable products, with competitive prices and worldwide performance, high sensitivity and functionality, user-friendly and reduced energy consumption, for different industrial applications. Research in the field of advanced/intelligent materials supposes a fundamental, experimental, laboratory and technological research and its approach has to be linked to the application. This involves, even for the niche fields, complex projects which result in scientific issues in top journals, patents and functional models. The third edition of ModTech International Conference was held in Mamaia, Romania, between June 17-20, with the Professional Association in Modern Manufacturing Technologies, ModTech, as main organizer, and the Constanta Maritime University, Constanta, Romania, Silesian University of Technology, Gliwice, Poland, the Technical University of Chisinau, Republic of Moldova and the Donetsk National Technical University, Donetsk, Ukraine as co-organizers. The ModTech2015 International Conference brought together representatives of technology and materials manufacturers, various universities, professional associations and research institutes that exchanged the latest knowledge on the conference topics. This edition was attended by 140 participants from 17 countries. The authors and co-authors were from various countries worldwide, namely: Sweden, China, Switzerland, Romania, Serbia, Germany, Netherlands, Belgium, France, South Korea, Taiwan, Poland, USA, Slovenia, Turkey, Republic of Moldova, Russia, Finland, Japan, Ukraine, Portugal, Uzbekistan, Iraq, Italy and India. The Keynote Speakers were as follows: Prof. Esteban Broitman - Linkoping University, Sweden; Prof. Ziyi Ge - NIMTE, Chinese Academy of Sciences, Ningbo, China; Prof. Thomas Graule - EMPA, Switzerland; prof. Razvan Tamas - Constanta Maritime University, Romania; Prof. Rainer Gadow - University of Stuttgart, Germany; Prof. Marcel Van de Voorde - DELFT University of Technology, Netherlands; Prof. Chris Lacor - Vrije University, Brussels, Belgium; Prof. Fiqiri Hodaj - National Polytechnique Institute of Grenoble, France; Prof. Hong Seok Park - University of Ulsan, South Korea; Prof. Der-Jang Liaw - National Taiwan University of Science and Technology, Taiwan; Prof. Petrica Vizureanu - Gheorghe Asachi Technical University of Iasi, Romania. The main publications of ModTech2015 International Conference are as follows: IOP Conference Series: Materials Science and Engineering, United Kingdom, Indian Journal of Engineering & Materials Sciences (IJEMS) and International Journal of Modern Manufacturing Technologies (IJMMT).

The Effects of US Army Chemical Protective Clothing on Speech Intelligibility, Visual Field, Body Mobility and Psychomotor Coordination of Men

DTIC Science & Technology

1987-09-01

soldiers wearing NBC clothing in hot/humid and hot/dry climates (Report MRL-R-826).Ascot Vale, Victoria, Australia : Materials Research Laboratories...Development and Engineering Center. 47. White, R.M. and Churchill, E. (1971). The body size of soldier-: U.S. Army anthropometry - 1966 (Tech. Rep. 72... Anthropometry of U.S. Army aviators - 1970 (Tech. Rep. 72-52-CE). Natick, MA: US Army Natick Laboratories. (AD 743 528) 112 ,7 r4 r

Stennis Space Center goes to Washington Folklife Festival

NASA Image and Video Library

2008-07-03

Bryon Maynard (left), an aerospace technologist for Propulsion Systems & Tech in Stennis' Engineering and Science Directorate, uses a 'pocket rocket' to demonstrate the concept of rocket propulsion as part of NASA's exhibit at the Smithsonian Folklife Festival in Washington, D.C. Maynard is joined by Bradley Messer (right), chief of the Systems Engineering & Integration Division in Stennis' Engineering and Science Directorate, and a pair of exhibit visitors.

Stennis Space Center goes to Washington Folklife Festival

NASA Technical Reports Server (NTRS)

2008-01-01

Bryon Maynard (left), an aerospace technologist for Propulsion Systems & Tech in Stennis' Engineering and Science Directorate, uses a 'pocket rocket' to demonstrate the concept of rocket propulsion as part of NASA's exhibit at the Smithsonian Folklife Festival in Washington, D.C. Maynard is joined by Bradley Messer (right), chief of the Systems Engineering & Integration Division in Stennis' Engineering and Science Directorate, and a pair of exhibit visitors.

PhishGuru: A System for Educating Users about Semantic Attacks

DTIC Science & Technology

2009-04-14

Psychological based social engineering. Tech. rep., SANS Institute, 2003. [119] Macmillan, N. A., and Creelman , C. D. Detection Theory: A User’s Guide...36, 76, 84, 148, 157, 161]. In marketing, the focus is on strategies to enhance consumer persuasion and trust building [37,40,68, 189]. In psychology ...and science, social work, fine arts, nursing, music, and psychology . Two of the participants had only a high school degree. Using a wall projector, we

Program Manager: Journal of the Defense Systems Management College. Volume 16, Number 3, May-June 1987

DTIC Science & Technology

1987-06-01

redress a growingstrategic imbalance and provide an en- test pilots conducted a rigorous flight test during capability to penetrate Soviet program...ment career path for rated officers vidual rotates through assignments in ( pilots and navigators) is different from engineering, test and evaluation...pain. Acquiring the B-1B, or any other weapon system for that matter, entails developing, testing ard producing new technology. In any high-tech en

New frontiers in design synthesis

NASA Technical Reports Server (NTRS)

Goldin, D. S.; Venneri, S. L.; Noor, A. K.

1999-01-01

The Intelligent Synthesis Environment (ISE), which is one of the major strategic technologies under development at NASA centers and the University of Virginia, is described. One of the major objectives of ISE is to significantly enhance the rapid creation of innovative affordable products and missions. ISE uses a synergistic combination of leading-edge technologies, including high performance computing, high capacity communications and networking, human-centered computing, knowledge-based engineering, computational intelligence, virtual product development, and product information management. The environment will link scientists, design teams, manufacturers, suppliers, and consultants who participate in the mission synthesis as well as in the creation and operation of the aerospace system. It will radically advance the process by which complex science missions are synthesized, and high-tech engineering Systems are designed, manufactured and operated. The five major components critical to ISE are human-centered computing, infrastructure for distributed collaboration, rapid synthesis and simulation tools, life cycle integration and validation, and cultural change in both the engineering and science creative process. The five components and their subelements are described. Related U.S. government programs are outlined and the future impact of ISE on engineering research and education is discussed.

Building 21st Century Schools: Designing Smarter, Sleeker High-Tech Facilities.

ERIC Educational Resources Information Center

Cutshall, Sandy

2003-01-01

The demand for high-tech programs in tandem with traditional classes challenges school districts to provide flexible facilities for career and technical education. Some districts partner with local businesses to develop state-of-the art facilities and deal with costs, upkeep, and upgrading. Some high-tech educational facilities are themselves…

Introduction to Vocations. High Tech Focus. Final Report 1984-85.

ERIC Educational Resources Information Center

Wayne Township Schools, NJ.

This report contains the materials that were developed during a project to make middle-grade students more aware of high tech careers through the following activities: (1) teacher and student visitations of community sites to explore high tech careers in 15 occupational clusters; (2) exploratory activities to facilitate linkages and articulation…

Airport Noise Tech Challenge Overview

NASA Technical Reports Server (NTRS)

Bridges, James

2011-01-01

The Supersonics Project, operating under NASA Aeronautics Mission Directorate#s Fundamental Aero Program, has been organized around the Technical Challenges that have historically precluded commercial supersonic flight. One of these Challenges is making aircraft that are capable of such high aerodynamic performance quiet enough around airports that they will not be objectionable. It is recognized that a successful civilian supersonic aircraft will be a system where many new technologies will come together, and for this to happen not only will new low noise propulsion concepts be required, but new engineering tools that predict the noise of the aircraft as these technologies are combined and compromised with the rest of the aircraft design. These are the two main objectives of the Airport Noise Tech Challenge. " ! As a Project in the Fundamental Aero Program, we work at a relatively low level of technology readiness. However, we have high level milestones which force us to integrate our efforts to impact systems-level activities. To keep the low-level work tied to delivering engineering tools and low-noise concepts, we have structured our milestones around development of the concepts and organized our activities around developing and applying our engineering tools to these concepts. The final deliverables in these milestones are noise prediction modules validated against the best embodiment of each concept. These will then be used in cross-disciplinary exercises to demonstrate the viability of aircraft designs to meet all the Technical Challenges. Some of the concepts being developed are shown: Fan Flow Diverters, Multi-jet Shielding, High-Aspect Ratio Embedded Nozzles, Plasma Actuated Instability Manipulation, Highly Variable Cycle Mixer- Ejectors, and Inverted Velocity Profiles. These concepts are being developed for reduced jet noise along with the design tools which describe how they perform when used in various aircraft configurations. Several key upcoming events are highlighted, including tests of the Highly Variable Cycle Mixer-Ejectors, and Inverted Velocity Profiles. Other key events are milestones to be delivered within the next calendar year.

Acoustic Database for Turbofan Engine Core-Noise Sources. I; Volume

NASA Technical Reports Server (NTRS)

Gordon, Grant

2015-01-01

In this program, a database of dynamic temperature and dynamic pressure measurements were acquired inside the core of a TECH977 turbofan engine to support investigations of indirect combustion noise. Dynamic temperature and pressure measurements were recorded for engine gas dynamics up to temperatures of 3100 degrees Fahrenheit and transient responses as high as 1000 hertz. These measurements were made at the entrance of the high pressure turbine (HPT) and at the entrance and exit of the low pressure turbine (LPT). Measurements were made at two circumferential clocking positions. In the combustor and inter-turbine duct (ITD), measurements were made at two axial locations to enable the exploration of time delays. The dynamic temperature measurements were made using dual thin-wire thermocouple probes. The dynamic pressure measurements were made using semi-infinite probes. Prior to the engine test, a series of bench, oven, and combustor rig tests were conducted to characterize the performance of the dual wire temperature probes and to define and characterize the data acquisition systems. A measurement solution for acquiring dynamic temperature and pressure data on the engine was defined. A suite of hardware modifications were designed to incorporate the dynamic temperature and pressure instrumentation into the TECH977 engine. In particular, a probe actuation system was developed to protect the delicate temperature probes during engine startup and transients in order to maximize sensor life. A set of temperature probes was procured and the TECH977 engine was assembled with the suite of new and modified hardware. The engine was tested at four steady state operating speeds, with repeats. Dynamic pressure and temperature data were acquired at each condition for at least one minute. At the two highest power settings, temperature data could not be obtained at the forward probe locations since the mean temperatures exceeded the capability of the probes. The temperature data were processed using software that accounts for the effects of convective and conductive heat transfer. The software was developed under previous NASA sponsored programs. Compensated temperature spectra and compensated time histories corresponding to the dynamic temperature of the gas stream were generated. Auto-spectral and cross-spectral analyses of the data were performed to investigate spectral features, acoustic circumferential mode content, signal coherence, and time delays. The dynamic temperature data exhibit a wideband and fairly flat spectral content. The temperature spectra do not change substantially with operating speed. The pressure spectra in the combustor and ITD exhibit generally similar shapes and amplitudes, making it difficult to identify any features that suggest the presence of indirect combustion noise. Cross-spectral analysis reveal a strong correlation between pressure and temperature fluctuations in the ITD, but little correlation between temperature fluctuations at the entrance of the HPT and pressure fluctuations downstream of it. Temperature fluctuations at the entrance of the low pressure turbine were an order of magnitude smaller than those at the entrance to the high pressure turbine. Time delay analysis of the temperature fluctuations in the combustor was inconclusive, perhaps due to the substantial mixing that occurs between the upstream and downstream locations. Time delay analysis of the temperature fluctuations in the ITD indicate that they convect at the mean flow speed. Analysis of the data did not reveal any convincing indications of the presence of indirect combustion noise. However, this analysis has been preliminary and additional exploration of the data is recommended including the use of more sophisticated signal processing to explore subtle issues that have been revealed but which are not yet fully understood or explained.

FY04 Engineering Technology Reports Laboratory Directed Research and Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sharpe, R M

2005-01-27

This report summarizes the science and technology research and development efforts in Lawrence Livermore National Laboratory's Engineering Directorate for FY2004, and exemplifies Engineering's more than 50-year history of developing the technologies needed to support the Laboratory's missions. Engineering has been a partner in every major program and project at the Laboratory throughout its existence and has prepared for this role with a skilled workforce and the technical resources developed through venues like the Laboratory Directed Research and Development Program (LDRD). This accomplishment is well summarized by Engineering's mission: ''Enable program success today and ensure the Laboratory's vitality tomorrow''. Engineering's investmentmore » in technologies is carried out through two programs, the ''Tech Base'' program and the LDRD program. LDRD is the vehicle for creating those technologies and competencies that are cutting edge. These require a significant level of research or contain some unknown that needs to be fully understood. Tech Base is used to apply technologies to a Laboratory need. The term commonly used for Tech Base projects is ''reduction to practice''. Therefore, the LDRD report covered here has a strong research emphasis. Areas that are presented all fall into those needed to accomplish our mission. For FY2004, Engineering's LDRD projects were focused on mesoscale target fabrication and characterization, development of engineering computational capability, material studies and modeling, remote sensing and communications, and microtechnology and nanotechnology for national security applications. Engineering's five Centers, in partnership with the Division Leaders and Department Heads, are responsible for guiding the long-term science and technology investments for the Directorate. The Centers represent technologies that have been identified as critical for the present and future work of the Laboratory, and are chartered to develop their respective areas. Their LDRD projects are the key resources to attain this competency, and, as such, nearly all of Engineering's portfolio falls under one of the five Centers. The Centers and their Directors are: (1) Center for Computational Engineering: Robert M. Sharpe; (2) Center for Microtechnology and Nanotechnology: Raymond P. Mariella, Jr.; (3) Center for Nondestructive Characterization: Harry E. Martz, Jr.; (4) Center for Precision Engineering: Keith Carlisle; and (5) Center for Complex Distributed Systems: Gregory J. Suski, Acting Director.« less

Tech Reading/Small Engines: Performance Package, Minnesota Profile of Learning.

ERIC Educational Resources Information Center

Minnesota State Dept. of Children, Families, and Learning, St. Paul.

Developed by classroom teachers during the development phase of Minnesota's Graduation Standards, this performance package is made up of locally designed assignments that, taken together, show whether a student has learned and can apply the knowledge and skills related to technical reading regarding small engines. It begins with reference to the…

Let's GO Tech to Pursue Sustainability and Happiness

ERIC Educational Resources Information Center

Lee, Lung-Sheng

2012-01-01

Technology refers to making or doing things to extend human capability to meet our needs or wants. Both technology and engineering are closely related. The majority of faculty and students in both Kisarazu National College of Technology (Kisarazu Kosen or KNCT) and National United University (NUU) are in the field of engineering. Based upon a…

Perception of the Acquisition of Generic Competences in Engineering Degrees

ERIC Educational Resources Information Center

Olmedo-Torre, Noelia; Martínez, María Martínez; Perez-Poch, Antoni; García, Beatriz Amante

2018-01-01

The aim of this paper is to analyze what generic competencies at the "Universitat Politécnica de Catalunya" (UPC BarcelonaTech) are most evaluated by the teaching staff belonging to the first curricular block of industrial engineering degree courses at the Barcelona "Escola Universitaria d'Enginyeria Técnica Industrial," and…

Fine-Filament MgB2 Superconductor Wire

NASA Technical Reports Server (NTRS)

Cantu, Sherrie

2015-01-01

Hyper Tech Research, Inc., has developed fine-filament magnesium diboride (MgB2) superconductor wire for motors and generators used in turboelectric aircraft propulsion systems. In Phase I of the project, Hyper Tech demonstrated that MgB2 multifilament wires (<10 micrometers) could reduce alternating current (AC) losses that occur due to hysteresis, eddy currents, and coupling losses. The company refined a manufacturing method that incorporates a magnesium-infiltration process and provides a tenfold enhancement in critical current density over wire made by a conventional method involving magnesium-boron powder mixtures. Hyper Tech also improved its wire-drawing capability to fabricate fine multifilament strands. In Phase II, the company developed, manufactured, and tested the wire for superconductor and engineering current density and AC losses. Hyper Tech also fabricated MgB2 rotor coil packs for a superconducting generator. The ultimate goal is to enable low-cost, round, lightweight, low-AC-loss superconductors for motor and generator stator coils operating at 25 K in next-generation turboelectric aircraft propulsion systems.

KSC-2012-2760

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Dr. LaNetra C. Tate, center, materials engineer at Kennedy Space Center, is surrounded by students as she welcomes them for their tour of the Space Life Sciences Lab facilities. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

Development of a Dedicated Speech Work Station.

DTIC Science & Technology

1984-12-01

AD-Ai55 465 DEVELOPMENT OF R DEDICATED SPEECH WORK STTION(U) AIR / FORCE INST OF TECH WRIGHT-PATTERSON AFB OH SCHOOL OF ENGINEERING W H LIEBER DEC 84...Presented to the Faculty of the School of Engineering of the Air Force Institute of Technology Air University in Partial Fulfillment of the Requirement for...the Degree of Master of Science in Electrical Engineering by William H. Lieber, B.S.E.E. Capt USAF Graduate Electrical Engineering December 1984

Report from the BIT's 4th Annual World Congress of High-Tech Acupuncture and Integrative Medicine Held in Xi'an, China, 25-27 September 2017.

PubMed

Litscher, Gerhard; Mei, Xiaodan

2017-10-19

High-tech acupuncture is an example of a very successful cross-over between tradition and innovation. "The Annual World Congress of High-Tech Acupuncture and Integrative Medicine" was successfully organized on four occasions, and attracted more than 800 participants from 55 countries [...].

NASA Tech Briefs, March 1996. Volume 20, No. 3

NASA Technical Reports Server (NTRS)

1996-01-01

Topics: Computer-Aided Design and Engineering; Electronic Components and Cicuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information; Books and Reports.

NASA Tech Briefs, September 1999. Volume 23, No. 9

NASA Technical Reports Server (NTRS)

1999-01-01

Topics discussed include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences;

NASA Tech Briefs, March 1993. Volume 17, No. 3

NASA Technical Reports Server (NTRS)

1993-01-01

Topics include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences;

Concise review: carbon nanotechnology: perspectives in stem cell research.

PubMed

Pryzhkova, Marina V

2013-05-01

Carbon nanotechnology has developed rapidly during the last decade, and carbon allotropes, especially graphene and carbon nanotubes, have already found a wide variety of applications in industry, high-tech fields, biomedicine, and basic science. Electroconductive nanomaterials have attracted great attention from tissue engineers in the design of remotely controlled cell-substrate interfaces. Carbon nanoconstructs are also under extensive investigation by clinical scientists as potential agents in anticancer therapies. Despite the recent progress in human pluripotent stem cell research, only a few attempts to use carbon nanotechnology in the stem cell field have been reported. However, acquired experience with and knowledge of carbon nanomaterials may be efficiently used in the development of future personalized medicine and in tissue engineering.

Adult Tech Prep.

ERIC Educational Resources Information Center

Schaad, Donna

For over 2 years, Blak Hawk College (Illinois) has provided high school equivalency (GED) candidates and recipients, older returning students, and underprepared high school graduates with a Tech Prep curriculum to give them the skills to make the transition from adult basic education to college or work. The Adult Tech Prep (ATP) core curriculum…

NASA Tech Briefs, November 1999. Volume 23, No. 11

NASA Technical Reports Server (NTRS)

1999-01-01

Topics covered include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Materials; Computer Programs; Mechanics; Machinery/Automation; Physical Sciences; Mathematics and Information Sciences; Books and Reports.

Women and minorities science bill becomes law

NASA Astrophysics Data System (ADS)

Showstack, Randy

U.S. President Bill Clinton has signed into law a measure to establish a commission to identify and address problems associated with the recruitment, retention, and advancement of women, minorities, and persons with disabilities in science and engineering fields."Today, we have taken a positive step forward to strengthen and expand our high-tech workforce by ensuring that women, minorities, and persons with disabilities have the skills necessary to compete in the Information Age," said U.S. Rep. Connie Morella (R.-Md.), who introduced the measure.

Research status and development of application fields in enzyme technology

NASA Astrophysics Data System (ADS)

Ji, Y. B.; Wang, S. W.; Yu, M.; Ru, X.; Wei, C.; Zhu, H. J.; Li, Z. Y.; Zhao, H.; Qiao, A. N.; Guo, S. Z.; Lu, L.

2018-01-01

Biological enzymes are catalyzed by living cells, most of which are proteins, and very few are RNA. Biological engineering as a new high-tech has been rapid development, Enzyme manufacturing and application areas are gradually expanding, In this paper, the status and progress of the application of enzyme technology are reviewed by reviewing the literature. and aims to provide reference for the application of enzyme technology and provide scientific basis for its future research and development in new field.

Design and Implementation of a Mechatronics Learning Module in a Large First-Semester Engineering Course

ERIC Educational Resources Information Center

Castles, R. T.; Zephirin, T.; Lohani, V. K.; Kachroo, P.

2010-01-01

Since 2005, the first-year engineering program at Virginia Tech, Blacksburg, has been significantly restructured to include more hands-on learning. A major grant (2004-2009) under the department level reform (DLR) program of the National Science Foundation (NSF) facilitated this restructuring. A number of hands-on learning modules were developed…

Beyond Smash and Crash: Gender-Friendly Tech Ed

ERIC Educational Resources Information Center

McCarthy, Ray

2009-01-01

In order to increase participation in science, technology, engineering, and math (STEM) fields and careers, one of the problems that needs to be addressed is gender equity of study and careers in STEM fields. In general, women represent less than 30% of all STEM students in college. Furthermore, less than one third of professional engineers and…

LTPP Climate Tool [Tech Brief

DOT National Transportation Integrated Search

2017-01-01

This Product Brief describes the Long-Term Pavement Performance (LTPP) Climate Tool (intended for use by infrastructure engineers) that provides convenient access to the National Aeronautics and Space Administration (NASA) Modern-Era Retrospective An...

NASA Tech Briefs, October 1993. Volume 17, No. 10

NASA Technical Reports Server (NTRS)

1993-01-01

Topics include: Sensors; esign and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication technology; Mathematics and Information Sciences; Life Sciences; Books and Reports.

Naval Research Laboratory Overview

DTIC Science & Technology

2012-10-01

Electronics Science & Tech Biomolecular Science & Engineering Ocean and Atmospheric Science & Technology Dr. E. Franchi Acoustics Remote...Operational Global Atmospheric Model 1982 NQR detection for explosives & narcotics 1992 Clementine Spacecraft 1991-1994 Timation - GPS 1964-1977

NASA Tech Briefs, January 2000. Volume 24, No. 1

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: Data Acquisition; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Bio-Medical; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Information Sciences; Books and reports.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Desroches, Louis-Benoit; Garbesi, Karina

It is well established that energy efficiency is most often the lowest cost approach to reducing national energy use and minimizing carbon emissions. National investments in energy efficiency to date have been highly cost-effective. The cumulative impacts (out to 2050) of residential energy efficiency standards are expected to have a benefit-to-cost ratio of 2.71:1. This project examined energy end-uses in the residential, commercial, and in some cases the industrial sectors. The scope is limited to appliances and equipment, and does not include building materials, building envelopes, and system designs. This scope is consistent with the scope of DOE's appliance standardsmore » program, although many products considered here are not currently subject to energy efficiency standards. How much energy could the United States save if the most efficient design options currently feasible were adopted universally? What design features could produce those savings? How would the savings from various technologies compare? With an eye toward identifying promising candidates and strategies for potential energy efficiency standards, the Max Tech and Beyond project aims to answer these questions. The analysis attempts to consolidate, in one document, the energy savings potential and design characteristics of best-on-market products, best-engineered products (i.e., hypothetical products produced using best-on-market components and technologies), and emerging technologies in research & development. As defined here, emerging technologies are fundamentally new and are as yet unproven in the market, although laboratory studies and/or emerging niche applications offer persuasive evidence of major energy-savings potential. The term 'max tech' is used to describe both best-engineered and emerging technologies (whichever appears to offer larger savings). Few best-on-market products currently qualify as max tech, since few apply all available best practices and components. The three primary analyses presented in this report are: Nevertheless, it is important to analyze best-on-market products, since data on truly max tech technologies are limited. (1) an analysis of the cross-cutting strategies most promising for reducing appliance and equipment energy use in the U.S.; (2) a macro-analysis of the U.S. energy-saving potential inherent in promising ultra-efficient appliance technologies; and (3) a product-level analysis of the energy-saving potential.« less

Enhancing STEM Education through Cubesats: Using Satellite Integration as a Teaching Tool at a Non-Tech School

NASA Astrophysics Data System (ADS)

Bernardes, S.; Cotten, D. L.

2016-12-01

University-based satellite programs have been successfully used as a platform for teaching STEM related fields, bringing tremendous benefits to graduate and undergraduate education. Considering their infrastructure and curricula, tech schools have traditionally been considered logical candidates for hosting such programs. More recently, with the dissemination of small satellites initiatives, non-tech schools have been presented the opportunity of developing satellite design and implementation programs. This work reports on the experiences and challenges associated with implementing a satellite program at the University of Georgia (UGA), a non-tech university. With funding from the Air Force Research Laboratory's (AFRL) University Nanosat Program (UNP) and NASA's Undergraduate Student Instrument Project (USIP) a team of undergraduates at UGA has recently been tasked with building two small satellites and helping to create a Small Satellite Research Laboratory (SSRL) at the university. Unique features of the satellite program at UGA include its team of students from a broad range of backgrounds and departments (Engineering, Computer Science, Art, Business, and Geography) and the previous exposure of many of these students to synergistic technologies, including arduino and unmanned aerial systems. We show how informal exposure to those technologies and willingness of students to focus on areas outside of their field of study can benefit from the implementation of satellite programs. In this regard, we report on methods and techniques used to find and recruit driven and knowledgeable students to work in a high paced field such as satellite system integration. We show how students and faculty from multiple departments have collaborated to reach a common, far reaching goal and describe our proposed methods to evaluate and measure educational goals based around SSRL and its projects. We also present the challenges associated with the lack of a developed engineering program, including our solutions to a shortage of equipment and expertise regarding building satellite systems and a satellite laboratory. Finally, we our outreach methods, including K-12, and share our experience and successes finding industry partners, considering an absence of background in the field and prior collaborations.

PREFACE: 2nd Russia-Japan-USA Symposium on the Fundamental and Applied Problems of Terahertz Devices and Technologies (RJUS TeraTech - 2013)

NASA Astrophysics Data System (ADS)

Karasik, Valeriy; Ryzhii, Viktor; Yurchenko, Stanislav

2014-03-01

The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) Bauman Moscow State Technical University Moscow, Russia, 3-6 June, 2013 The 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies' (RJUS TeraTech - 2013) was held in Bauman Moscow State Technical University on 3-6 June 2013 and was devoted to modern problems of terahertz optical technologies. RJUS TeraTech 2013 was organized by Bauman Moscow State Technical University in cooperation with Tohoku University (Sendai, Japan) and University of Buffalo (The State University of New York, USA). The Symposium was supported by Bauman Moscow State Technical University (Moscow, Russia) and Russian Foundation for Basic Research (grant number 13-08-06100-g). RJUS TeraTech - 2013 became a foundation for sharing and discussing modern and promising achievements in fundamental and applied problems of terahertz optical technologies, devices based on grapheme and grapheme strictures, condensed matter of different nature. Among participants of RJUS TeraTech - 2013, there were more than 100 researchers and students from different countries. This volume contains proceedings of the 2nd Russia-Japan-USA Symposium 'The Fundamental & Applied Problems of Terahertz Devices & Technologies'. Valeriy Karasik, Viktor Ryzhii and Stanislav Yurchenko Bauman Moscow State Technical University Symposium chair Anatoliy A Aleksandrov, Rector of BMSTU Symposium co-chair Valeriy E Karasik, Head of the Research and Educational Center 'PHOTONICS AND INFRARED TECHNOLOGY' (Russia) Invited Speakers Taiichi Otsuji, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Akira Satou, Research Institute of Electrical Communication, Tohoku University, Sendai, Japan Michael Shur, Electrical, Computer and System Engineering and Physics, Applied Physics, and Astronomy, Rensselaer Polytechnic Institute, NY, USA Natasha Kirova, University Paris-Sud, France Andrei Sergeev, Department of Electrical Engineering, The University of Buffalo, The State University of New Your, Buffalo, NY, USA Magnus Willander, Linkoping University (LIU), Department of Science and Technology, Linkopings, Sweden Dmitry R Khohlov, Physical Faculty, Lomonosov Moscow State University, Russia Vladimir L Vaks, Institute for Physics of Microstructures of Russian Academy of Sciences, Russia

Performance evaluation of Louisiana superpave mixtures : tech summary.

DOT National Transportation Integrated Search

2008-12-01

The primary objective of this research was to evaluate the fundamental engineering : properties and mixture performance of Superpave hot mix asphalt (HMA) mixtures : in Louisiana through laboratory mechanistic tests, aggregate gradation analysis, and...

NASA Tech Briefs, February 2000. Volume 24, No. 2

NASA Technical Reports Server (NTRS)

2000-01-01

Topics covered include: Test and Measurement; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Bio-Medical; Mathematics and Information Sciences; Computers and Peripherals.

NASA Tech Briefs, March 1994. Volume 18, No. 3

NASA Technical Reports Server (NTRS)

1994-01-01

Topics include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports

The First ECPD Accredited Environmental B. Tech. Program

ERIC Educational Resources Information Center

Rowe, Donald R.; Russell, John P.

1975-01-01

Describes the first bachelor of science program in environmental engineering technology, with objectives of providing adequate training in the control of air, water, and land pollution. Includes a four-year curriculum plan. (MLH)

NASA Tech Briefs, March 2000. Volume 24, No. 3

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports.

NASA Tech Briefs, March 1997. Volume 21, No. 3

NASA Technical Reports Server (NTRS)

1997-01-01

Topics: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports.

Electric Vehicle Modeling and Simulation.

DTIC Science & Technology

1983-08-01

RD-RI39 709 ELECTRIC VEHICLE MODELING RHD SIMULRTION(U) AIR FORCE lit INST OF TECH NRIGHT-PRTTERSON RFD OH SCHOOL OF ENGINEERING A R DEMISPELARE RUG...for Public Release Distribution Unlimited Fl School of Engineering Air Force Institute of Technology Wright-Patterson Air Force Base, Ohio Table of... Engineering , 49: 49-51 (27 August 1979). 36. Renner -Smith, S. "Battery-Saving Flywheel Gives Electric Car Freeway Zip," Popular Science, 215(10): 82-84

Understanding transferable supply chain lessons and practices to a "high-tech" industry using guidelines from a primary sector industry: a case study in the food industry supply chain.

PubMed

Coronado Mondragon, Adrian E; Coronado Mondragon, Christian E; Coronado, Etienne S

2015-01-01

Flexibility and innovation at creating shapes, adapting processes, and modifying materials characterize composites materials, a "high-tech" industry. However, the absence of standard manufacturing processes and the selection of materials with defined properties hinder the configuration of the composites materials supply chain. An interesting alternative for a "high-tech" industry such as composite materials would be to review supply chain lessons and practices in "low-tech" industries such as food. The main motivation of this study is to identify lessons and practices that comprise innovations in the supply chain of a firm in a perceived "low-tech" industry that can be used to provide guidelines in the design of the supply chain of a "high-tech" industry, in this case composite materials. This work uses the case study/site visit with analogy methodology to collect data from a Spanish leading producer of fresh fruit juice which is sold in major European markets and makes use of a cold chain. The study highlights supply base management and visibility/traceability as two elements of the supply chain in a "low-tech" industry that can provide guidelines that can be used in the configuration of the supply chain of the composite materials industry.

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices.

PubMed

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices.

Two Different Maintenance Strategies in the Hospital Environment: Preventive Maintenance for Older Technology Devices and Predictive Maintenance for Newer High-Tech Devices

PubMed Central

Sezdi, Mana

2016-01-01

A maintenance program generated through the consideration of characteristics and failures of medical equipment is an important component of technology management. However, older technology devices and newer high-tech devices cannot be efficiently managed using the same strategies because of their different characteristics. This study aimed to generate a maintenance program comprising two different strategies to increase the efficiency of device management: preventive maintenance for older technology devices and predictive maintenance for newer high-tech devices. For preventive maintenance development, 589 older technology devices were subjected to performance verification and safety testing (PVST). For predictive maintenance development, the manufacturers' recommendations were used for 134 high-tech devices. These strategies were evaluated in terms of device reliability. This study recommends the use of two different maintenance strategies for old and new devices at hospitals in developing countries. Thus, older technology devices that applied only corrective maintenance will be included in maintenance like high-tech devices. PMID:27195666

The Effect of Studying Tech Prep in High School and College Academic Performance

ERIC Educational Resources Information Center

Ray, Larry A.

2011-01-01

This study examined the academic performance of Tech Prep students (referred to as participants) in comparison to non-Tech Prep students (referred to as non-participants) entering a two-year community college from sixteen different high schools in Stark County, Ohio. This study provided a quantitative analysis of students' academic experiences to…

NASA Tech Briefs, July 1994. Volume 18, No. 7

NASA Technical Reports Server (NTRS)

1994-01-01

Topics covered include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports

Hi-Tech Unrevealed.

ERIC Educational Resources Information Center

Vernooy, D. Andrew; Alter, Kevin

2001-01-01

Presents design features of the University of Texas' Applied Computational Engineering and Sciences Building and discusses how institutions can guide the character of their architecture without subverting the architects' responsibility to confront their contemporary culture in a critical manner. (GR)

NASA Tech Briefs, November 2000. Volume 24, No. 11

NASA Technical Reports Server (NTRS)

2000-01-01

Topics covered include: Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Test and Measurement; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Data Acquisition.

NASA Tech Briefs, April 1996. Volume 20, No. 4

NASA Technical Reports Server (NTRS)

1996-01-01

Topics covered include: Advanced Composites and Plastics; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information; Books and Reports.

NASA Tech Briefs, October 1994. Volume 18, No. 10

NASA Technical Reports Server (NTRS)

1994-01-01

Topics: Data Acquisition and Analysis; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery; Fabrication Technology; Mathematics and Information Sciences; Life Sciences; Books and Reports

Incorporation of Data Analysis throughout the ChE Curriculum Made Easy with DataFit

ERIC Educational Resources Information Center

Brenner, James R.

2007-01-01

At Florida Tech, we have incorporated DataFit from Oakdale Engineering throughout the entire curriculum, beginning with ChE 1102, an eight-week, one-day-per-week, two-hour, one-credit-hour, second-semester Introduction to Chemical Engineering course in a hands-on computer classroom. Our experience is that students retain data analysis concepts…

12th Annual Science and Engineering Technology Conference/DoD TECH Exposition

DTIC Science & Technology

2011-06-23

compound when planning horizons grow: long design - test - build-field-adapt lead-times exacerbate uncertain futures problems, overload designs , and...ERS Environment ERS: Tools and Technologies to Facilitate Adaptability & Trustability 4. Tying design , physical and computational testing 6...science, engineering concepts, processes, and design tools to: • Continuously coordinate design , testing , and production with warfighter review to

Hire a Milwaukee Engineer | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

April 2016 Milwaukee Engineer | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

SMC Systems Engineering: Specialty Engineering Disciplines Framework and Descriptions. Volume 2

DTIC Science & Technology

2011-10-03

Engineering Disciplines Updale SNiEng Planning to Meet Program Objectives 1- -----:;..._- .-----------------, I Update SIW Eng T as1<s & Timing ol T asl<s...Analyses 1-Dev SNi Eng Products e.g. Assessmenls, Rills, Certs 1- ID & Manage Resources: Tools, Equip, Skills Assess Contractors’ Compian<:e to SIW Eng...Approaches to Meet SIW Ol>jeclives S1ipulale Contraclllal Risk and Actions lot Mitigations Review Contraclors’ Tech Data (Technical & Training Manuals

Concise Review: Carbon Nanotechnology: Perspectives in Stem Cell Research

PubMed Central

2013-01-01

Carbon nanotechnology has developed rapidly during the last decade, and carbon allotropes, especially graphene and carbon nanotubes, have already found a wide variety of applications in industry, high-tech fields, biomedicine, and basic science. Electroconductive nanomaterials have attracted great attention from tissue engineers in the design of remotely controlled cell-substrate interfaces. Carbon nanoconstructs are also under extensive investigation by clinical scientists as potential agents in anticancer therapies. Despite the recent progress in human pluripotent stem cell research, only a few attempts to use carbon nanotechnology in the stem cell field have been reported. However, acquired experience with and knowledge of carbon nanomaterials may be efficiently used in the development of future personalized medicine and in tissue engineering. PMID:23572053

Development of a Career Student Guide for the Tech Prep Program for Henry County High School.

ERIC Educational Resources Information Center

Winchester, Ruth Ann

This practicum report describes the research conducted in preparation for developing a career student guide to acquaint students attending Henry County High School (HCHS) in McDonough, Georgia, with the school's new tech prep program. Chapters 1 and 2 contain background information about HCHS' tech prep program and a review of literature regarding…

Economic Migrants in a Global Labour Market: A Report on the Recruitment and Retention of Asian Computer Professionals by Canadian High Tech Firms. CPRN Discussion Paper.

ERIC Educational Resources Information Center

Rao, Badrinath

The recruitment and retention of Asian computer professionals by Canadian high-tech companies was examined by interviewing 8 Canadian-born information technology (IT) workers, 47 Asian-born IT workers, and 8 human resource (HR) professionals employed by high-tech companies in Ottawa. Of the 47 Asians, 33 stated that they did not know much about…

The Effects of Partnership Management on Supply Chain Cooperative Performance: A Case Study of High-Tech Industry

NASA Astrophysics Data System (ADS)

Wu, Mei-Ying; Chang, Yun-Ju; Weng, Yung-Chien

2009-08-01

With the structural change of global supply chains, the relationship between manufacturers and suppliers has transformed into a long-term partnership. Thus, this study aims to explore the partnership between manufacturers and suppliers in Taiwan's high-tech industry. Four constructs, including partner characteristic, partnership quality, partnership closeness, and cooperative performance, induced from previous literatures are used to construct the research framework and hypotheses. A questionnaire survey is then performed on executives and staffs involved in the high-tech industry. The proposed framework and hypotheses are empirically validated through confirmatory factory analysis and structural equation modeling. It is expected that the research findings can serve as a reference for Taiwan's high-tech industry on building partnerships.

A systematic quality review of high-tech AAC interventions as an evidence-based practice.

PubMed

Morin, Kristi L; Ganz, Jennifer B; Gregori, Emily V; Foster, Margaret J; Gerow, Stephanie L; Genç-Tosun, Derya; Hong, Ee Rea

2018-06-01

Although high-tech augmentative and alternative communication (AAC) is commonly used to teach social-communication skills to people with autism spectrum disorder or intellectual disabilities who have complex communication needs, there is a critical need to evaluate the efficacy of this approach. The aim of this systematic review was to evaluate the quality of single-case experimental design research on the use of high-tech AAC to teach social-communication skills to individuals with autism spectrum disorder or intellectual disabilities who have complex communication needs, to determine if this intervention approach meets the criteria for evidence-based practices as outlined by the What Works Clearinghouse. Additionally, information on the following extended methodological standards is reported on all included studies: participant description, description of setting and materials, interventionist description, baseline and intervention description, maintenance, generalization, procedural integrity, and social validity. The results from 18 multiple-baseline or multiple-probe experiments across 17 studies indicate that using high-tech AAC to teach social-communication skills to individuals with autism spectrum disorder or intellectual disabilities and complex communication needs can be considered an evidence-based practice, although the review of comparison (i.e., alternating treatment) design studies did not indicate that high-tech AAC is significantly better than low-tech AAC.

NASA Tech Briefs, August 2000. Volume 24, No. 8

NASA Technical Reports Server (NTRS)

2000-01-01

Topics include: Simulation/Virtual Reality; Test and Measurement; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Medical Design.

Hypersonic missile propulsion system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kazmar, R.R.

1998-11-01

Pratt and Whitney is developing the technology for hypersonic components and engines. A supersonic combustion ramjet (scramjet) database was developed using hydrogen fueled propulsion systems for space access vehicles and serves as a point of departure for the current development of hydrocarbon scramjets. The Air Force Hypersonic Technology (HyTech) Program has put programs in place to develop the technologies necessary to demonstrate the operability, performance and structural durability of an expendable, liquid hydrocarbon fueled scramjet system that operates from Mach 4 to 8. This program will culminate in a flight type engine test at representative flight conditions. The hypersonic technologymore » base that will be developed and demonstrated under HyTech will establish the foundation to enable hypersonic propulsion systems for a broad range of air vehicle applications from missiles to space access vehicles. A hypersonic missile flight demonstration is planned in the DARPA Affordable Rapid Response Missile Demonstrator (ARRMD) program in 2001.« less

Scientific Toy

NASA Technical Reports Server (NTRS)

1989-01-01

Tensegritoy, inspired by the tensegrity concepts of R. Buckminster Fuller, is an erector set like toy designed to give students an understanding of structural stability. It is used by children, architects, engineers, and teachers. The manufacturer, Tensegrity Systems Corporation, also offers a collapsible point of purchase display which incorporates technology developed for space station trusses described in "NASA Tech Briefs." The tech brief described deployable trusses that can be collapsed into small packages for space shuttle transport, then unfolded in space. As a result, the display occupies a minimum amount of floor space, freight cost savings are substantial and assembly can be completed quickly.

Modeling Tools Predict Flow in Fluid Dynamics

NASA Technical Reports Server (NTRS)

2010-01-01

"Because rocket engines operate under extreme temperature and pressure, they present a unique challenge to designers who must test and simulate the technology. To this end, CRAFT Tech Inc., of Pipersville, Pennsylvania, won Small Business Innovation Research (SBIR) contracts from Marshall Space Flight Center to develop software to simulate cryogenic fluid flows and related phenomena. CRAFT Tech enhanced its CRUNCH CFD (computational fluid dynamics) software to simulate phenomena in various liquid propulsion components and systems. Today, both government and industry clients in the aerospace, utilities, and petrochemical industries use the software for analyzing existing systems as well as designing new ones."

Evidence-Based Design for Project-Based Learning: A Case Study for a 50,000 SF Addition Dedicated to the New Tech Curriculum

ERIC Educational Resources Information Center

Moretti, Richard D.; Conte, Philip R.

2012-01-01

The Seaford School District, Seaford, Delaware, determined that a component of their "reinvention" of Seaford High School would be the creation of a New Tech Academy, affiliated with the New Tech Network and housed in an addition to that building. The New Tech Network, headquartered in Napa, California, is a rapidly growing association…

Tech House

NASA Technical Reports Server (NTRS)

1978-01-01

The members of the Swain family- Dr. Charles "Bill" Swain, wife Elaine, daughter Carol, 17, son "Chuck", 12, and dog Susie have an interesting assignment. They are active participants in an important NASA research program involving the application of space-age technology to home construction. b' Transplanted Floridians, the Swains now reside in NASA's Tech House, loatedat Langley Research Center, Hampton, Virginia. Their job is to use and help evaluate the variety of advanced technology systems in Tech House. A contemporary three-bedroom home, Tech House incorporates NASA technology, the latest commercial building techniques and other innovations, all designed to reduce energy and water consumption and to provide new levels of comfort, convenience, security and fire safety. Tech House equipment performed well in initial tests, but a house is not a home until it has people. That's where the Swains come in. NASA wants to see how the various systems work under actual living conditions, to confirm the effectiveness of the innovations or to determine necessary modifications for improvement. The Swains are occupying the house for a year, during which NASA engineers are computer monitoring the equipment and assembling a record of day-to-day performance. . Tech House is a laboratory rather than a mass production prototype, but its many benefits may influence home design and construction. In a period of sharply rising utility costs, widespread adoption of Tech House features could provide large-scale savings to homeowners and potentially enormous national benefit in resources conservation. Most innovations are aerospace spinoffs: Some of the equipment is now commercially available; other systems are expected to be in production within a few years. Around 1980, a Tech House-type of home could be built for $45-50,000 (1 976 dollars). It is estimated that the homeowner would save well over $20,000 (again 1976 dollars) in utility costs over the average mortgage span of 20 years.

High Temperature Concentrated Solar Power Using Liquid Metal

NASA Astrophysics Data System (ADS)

Henry, Asegun

One of the most attractive ways to try and reduce the cost of concentrated solar power (CSP) is to increase the system efficiency and the biggest loss in the system occurs in the conversion of heat to electricity via heat engine. Heat engines that utilize turbomachinery currently operate near their thermodynamic limitations and thus one of the only ways to improve heat engine efficiency is to increase the turbine inlet temperature. Significant effort is being devoted to the development of supercritical CO2 heat engines, but the most efficient heat engines are combined cycles, which reach efficiencies as high as 60%. However, such heat engines require turbine inlet temperatures ~1300-1500C, which is far beyond what is currently feasible with the state of the art molten salt infrastructure. In working towards the development of a system that can operate in the 1300-1500C temperature range, the most significant challenges lie in the materials and forming functional and reliable components out of new materials. One of the most attractive options from a cost and heat transfer perspective is to use liquid metals, such as tin and aluminum-silicon alloys along with a ceramic based infrastructure. This talk will overview ongoing efforts in the Atomistic Simulation and Energy (ASE) research group at Georgia Tech to develop prototype components such as an efficient high temperature cavity receiver, pumps and valves that can make a liquid metal based CSP infrastructure realizable.

Robust, Thin Optical Films for Extreme Environments

NASA Technical Reports Server (NTRS)

2006-01-01

The environment of space presents scientists and engineers with the challenges of a harsh, unforgiving laboratory in which to conduct their scientific research. Solar astronomy and X-ray astronomy are two of the more challenging areas into which NASA scientists delve, as the optics for this high-tech work must be extremely sensitive and accurate, yet also be able to withstand the battering dished out by radiation, extreme temperature swings, and flying debris. Recent NASA work on this rugged equipment has led to the development of a strong, thin film for both space and laboratory use.

ManTech Implementing a Strategy to Deliver Weapon Systems Affordability

DTIC Science & Technology

2010-11-01

Tile 2007 – Translational Friction Stir Welding 2006 – Uncooled Focal Plane Array Producibility 2006 – Engine Rotor Life Extension 2005...compelling ideas will continue to help drive our Department’s innovative engine and ensure our Nation maintains its competitive edge on the...Sheets Composite Vertical Stabilizer Apache AH-64 NAVY The Challenge: Butt welding exterior ship panels produces a weld protrusion that exceeds the

Astronomy as a Tool for Training the Next Generation Technical Workforce

NASA Astrophysics Data System (ADS)

Romero, V.; Walsh, G.; Ryan, W.; Ryan, E.

A major challenge for today's institutes of higher learning is training the next generation of scientists, engineers, and optical specialists to be proficient in the latest technologies they will encounter when they enter the workforce. Although research facilities can offer excellent hands-on instructional opportunities, integrating such experiential learning into academic coursework without disrupting normal operations at such facilities can be difficult. Also, motivating entry level students to increase their skill levels by undertaking and successfully completing difficult coursework can require more creative instructional approaches, including fostering a fun, non-threatening environment for enhancing basic abilities. Astronomy is a universally appealing subject area, and can be very effective as a foundation for cultivating advanced competencies. We report on a project underway at the New Mexico Institute of Mining and Technology (NM Tech), a science and engineering school in Socorro, NM, to incorporate a state-of-the-art optical telescope and laboratory experiments into an entry-level course in basic engineering. Students enrolled in an explosive engineering course were given a topical problem in Planetary Astronomy: they were asked to develop a method to energetically mitigate a potentially hazardous impact between our planet and a Near-Earth asteroid to occur sometime in the future. They were first exposed to basic engineering training in the areas of fracture and material response to failure under different environmental conditions through lectures and traditional laboratory exercises. The students were then given access to NM Tech's Magdalena Ridge Observatory's (MRO) 2.4-meter telescope to collect physical characterization data, (specifically shape information) on two potentially hazardous asteroids (one roughly spherical, the other an elongated ellipsoid). Finally, the students used NM Tech's Energetic Materials Research and Testing Center (EMRTC) to perform field experiments to discern how an object's shape affects disruptive outcomes, and what must be factored into mitigation schemes to attain the desired result of complete destruction of the object. The scientific findings (details will be presented) derived by the students were valuable, and the students benefited from this non-traditional teaching approach such that they acquired a superior appreciation for research and experimentation, and exited the course with an increased motivation to continue their engineering training.

Customer Management Skills for Effective Air Force Civil Engineering Customer Service.

DTIC Science & Technology

1986-09-01

advertise --competence. (1) Craftsmen working closely with customer service -doing what is promised when it’s promised -if return to job site required, tell...RD-RI74 1 4 CUSTOMER MANAGEMENT SKILLS FOR EFFECTIVE AIR FORCE / I CIVIL ENGINEERING CUST (U) AIR FORCE INST OF TECH WRIGHT-PATTERSON RFS ON...I93 -A CUSTOMER MANAGEMENT SKILLS FOR EFFECTIVE AIR FORCE CIVIL ENGINEERING CUSTOMER SERVICE THESIS Danny S.- Long Captain, USAF AFIT/GEM/DEM/86S-1 7

Measurement of Civil Engineering Customer Satisfaction in Tactical Air Command: A Prototype Evaluation Program.

DTIC Science & Technology

1986-09-01

customers . The article states that in response to a White House Office of Consumer Affairs study and with the wide use of minicomputers: Companies are...D-A174 l16 MEASUREMENT OF CIVIL ENGINEERING CUSTOMER SRTISFACTIbN 1/ IN TACTICAL AIR CO (U) AIR FORCE INST OF TECH ...... RIGHT-PATTERSON AFB ON...BUREAU OF STANDARDS- 1963-A_ . -_- ’II I-F MEASUREMENT OF CIVIL ENGINEERING CUSTOMER SATISFACTION IN TACTICAL AIR COMMAND: A PROTOTYPE EVALUATION PROGRAM

"What I Did over My Summer Vacation..."

ERIC Educational Resources Information Center

Techniques: Making Education and Career Connections, 1997

1997-01-01

A tech prep summer camp was designed to give ninth graders a taste of tech prep before they were asked to choose a high school path. Parents were invited to dinner to learn about tech prep programs and their potential for successful careers. (JOW)

NASA Tech Briefs, July 2000. Volume 24, No. 7

NASA Technical Reports Server (NTRS)

2000-01-01

Topics covered include: Data Acquisition; Computer-Aided Design and Engineering; Electronic Components and Circuits; Electronic Systems; Test and Measurement; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports.

Biofuel co-product uses for pavement geo-materials stabilization : tech transfer summary, April 2010.

DOT National Transportation Integrated Search

2010-04-01

Objectives : Evaluate the ability of biofuel co-product (BCP) to function as an effective soil stabilizing agent. : Investigate the effect of BCP on the engineering properties of soil-BCP mixtures for Iowa conditions.

Communications for Lifelong Success I and II (Tech Prep English I and II). Pilot Test Materials for Pendleton High School, Pendleton, South Carolina. Draft.

ERIC Educational Resources Information Center

Turlington, Anita; And Others

These instructional materials include six supplementary units for Tech Prep English I (grade 9) and six assignments for Tech Prep English II (grade 10). The Tech Prep English I units have these components: unit objectives, introduction, and follow-up exercises. Topics include goal setting, problem solving and decision making, listening and reading…

Virtual reality helmet display quality influences the magnitude of virtual reality analgesia.

PubMed

Hoffman, Hunter G; Seibel, Eric J; Richards, Todd L; Furness, Thomas A; Patterson, David R; Sharar, Sam R

2006-11-01

Immersive Virtual Reality (VR) distraction can be used in addition to traditional opioids to reduce procedural pain. The current study explored whether a High-Tech-VR helmet (ie, a 60-degree field-of-view head-mounted display) reduces pain more effectively than a Low-Tech-VR helmet (a 35-degree field-of-view head-mounted display). Using a double-blind between-groups design, 77 healthy volunteers (no patients) aged 18-23 were randomly assigned to 1 of 3 groups. Each subject received a brief baseline thermal pain stimulus, and the same stimulus again minutes later while in SnowWorld using a Low-Tech-VR helmet (Group 1), using a High-Tech-VR helmet (Group 2), or receiving no distraction (Group 3, control group). Each participant provided subjective 0-10 ratings of cognitive, sensory, and affective components of pain, and amount of fun during the pain stimulus. Compared to the Low-Tech-VR helmet group, subjects in the High-Tech-VR helmet group reported 34% more reduction in worst pain (P < .05), 46% more reduction in pain unpleasantness (P = .001), 29% more reduction in "time spent thinking about pain" (P < .05), and 32% more fun during the pain stimulus in VR (P < .05). Only 29% of participants in the Low-Tech helmet group, as opposed to 65% of participants in the High-Tech-VR helmet group, showed a clinically significant reduction in pain intensity during virtual reality. These results highlight the importance of using an appropriately designed VR helmet to achieve effective VR analgesia (see ). Pain during medical procedures (eg, burn wound care) is often excessive. Adjunctive virtual reality distraction can substantially reduce procedural pain. The results of the present study show that a higher quality VR helmet was more effective at reducing pain than a lower quality VR helmet.

Problems and Countermeasures of Zhejiang High-Tech Enterprises Industry-University-Institute Cooperation in China

NASA Astrophysics Data System (ADS)

Zhou, Qing; Mao, Chong-Feng; Hou, Lin

Industry-university-institute cooperation is an important means to accelerate technical development and achievements for high-tech enterprises. Considering that Zhejiang high-tech enterprises existed some problems which included low cooperative level, single distribution, weak secondary R&D ability, obvious risk and so on, government should play an guiding role on improving information service system, enhancing cooperative level, promoting scientific intermediary service organization system construction, and building better environment for Industry-university-institute cooperation.

Project Synopsis for High School/High Tech

NASA Technical Reports Server (NTRS)

1997-01-01

To help increase the diversity of workers at NASA centers it is necessary to provide students with disabilities the opportunities to explore careers in high technology. HIGH SCHOOL/HIGH TECH, an enrichment program, pioneered at Goddard Space Flight Center, successfully introduces students with disabilities to high tech careers. This community-based partnership serves as a model for three additional NASA sites-Ames Research Center, Johnson Space Flight Center, and Lewis Research Center. For a three year period beginning August 15, 1995, provide financial and technical support to a local agency in each NASA center area which serves persons with disabilities to enable a High School/High Tech program to develop and stand alone. Each project will develop a basis of cooperation with Ames, Johnson, and Lewis as well as a variety of community groups including the public schools, high tech employers, post-secondary education and training programs, rehabilitation agencies, and community economic development organizations. Throughout the startup period and thereafter, local youths with disabilities will have early exposure to professions in mathematics, science, and technology-related fields. This exposure will be multifaceted to insure adequate opportunity for realistic career exploration so these youths have an opportunity to test their interests and abilities. The exposure will be presented in the most supportive environment that is feasible.

Does the Number of College Credits Earned in a Tech Prep and Postsecondary Enrollment Options Program Predict College Success?

ERIC Educational Resources Information Center

Meyer, Bruce A.

2011-01-01

The purpose of this study was to examine a Tech Prep Program located in Northwest Ohio and determine the degree to which college credits earned in high school through the Tech Prep and PSEO Programs predict college success and if there were any significant gender/race differences in credits earned and college success as well as high school…

KSC-2011-7235

NASA Image and Video Library

2011-10-03

CAPE CANAVERAL, Fla. -- In the Press Site auditorium at NASA's Kennedy Space Center in Florida, managers from NASA and the Economic Development Commission (EDC) of Florida’s Space Coast discuss a new five-year Space Act Agreement reaffirming the partnership of the two organizations. From left are Kennedy Space Center Director Robert Cabana, EDC President and CEO Lynda Weatherman, and Chairman of the Board of the EDC Bob Whelen. The agreement calls for NASA and EDC senior leadership to meet regularly to discuss economic development matters of mutual interest. Managers from Kennedy’s Center Planning and Development Office will work with the EDC on potential business partnerships and meet with business leaders and committees to address space-related and high-tech economic development. EDC officials will assist NASA with disseminating information about potential partnership opportunities, as well as space-related and high-tech economic development, and increase awareness of Kennedy’s Engineering and Technology Directorate collaboration initiatives. They also will promote the commercial use of underutilized facilities at Kennedy. NASA and the EDC entered into their first economic cooperation agreement in 2005. For more information about the Economic Development Commission (EDC) of Florida’s Space Coast, visit http://www.spacecoastedc.org/. Photo credit: NASA/Jim Grossmann

KSC-2011-7233

NASA Image and Video Library

2011-10-03

CAPE CANAVERAL, Fla. -- In the Press Site auditorium at NASA's Kennedy Space Center in Florida, representatives of NASA and the Economic Development Commission (EDC) of Florida’s Space Coast sign a new five-year Space Act Agreement. From left are Kennedy Space Center Director Director Robert Cabana and EDC President and CEO Lynda Weatherman, with Chairman of the Board of the EDC Bob Whelen looking on. The agreement calls for NASA and EDC senior leadership to meet regularly to discuss economic development matters of mutual interest. Managers from Kennedy’s Center Planning and Development Office will work with the EDC on potential business partnerships and meet with business leaders and committees to address space-related and high-tech economic development. EDC officials will assist NASA with disseminating information about potential partnership opportunities, as well as space-related and high-tech economic development, and increase awareness of Kennedy’s Engineering and Technology Directorate collaboration initiatives. They also will promote the commercial use of underutilized facilities at Kennedy. NASA and the EDC entered into their first economic cooperation agreement in 2005. For more information about the Economic Development Commission (EDC) of Florida’s Space Coast, visit http://www.spacecoastedc.org/. Photo credit: NASA/Jim Grossmann

KSC-2011-7234

NASA Image and Video Library

2011-10-03

CAPE CANAVERAL, Fla. -- In the Press Site auditorium at NASA's Kennedy Space Center in Florida, Lynda Weatherman (center), Economic Development Commission (EDC) of Florida’s Space Coast president and CEO, shows her enthusiasm for the new five-year Space Act Agreement she is signing. Also signing the agreement, at left, is Kennedy Space Center Director Robert Cabana. Bob Whelen, chairman of the board of the EDC, looks on at right. The agreement calls for NASA and EDC senior leadership to meet regularly to discuss economic development matters of mutual interest. Managers from Kennedy’s Center Planning and Development Office will work with the EDC on potential business partnerships and meet with business leaders and committees to address space-related and high-tech economic development. EDC officials will assist NASA with disseminating information about potential partnership opportunities, as well as space-related and high-tech economic development, and increase awareness of Kennedy’s Engineering and Technology Directorate collaboration initiatives. They also will promote the commercial use of underutilized facilities at Kennedy. NASA and the EDC entered into their first economic cooperation agreement in 2005. For more information about the Economic Development Commission (EDC) of Florida’s Space Coast, visit http://www.spacecoastedc.org/. Photo credit: NASA/Jim Grossmann

KSC-2011-7232

NASA Image and Video Library

2011-10-03

CAPE CANAVERAL, Fla. -- In the Press Site auditorium at NASA's Kennedy Space Center in Florida, representatives of NASA and the Economic Development Commission (EDC) of Florida’s Space Coast sign a new five-year Space Act Agreement. From left are Kennedy Space Center Director Robert Cabana and EDC President and CEO Lynda Weatherman, with Chairman of the Board of the EDC Bob Whelen looking on. The agreement calls for NASA and EDC senior leadership to meet regularly to discuss economic development matters of mutual interest. Managers from Kennedy’s Center Planning and Development Office will work with the EDC on potential business partnerships and meet with business leaders and committees to address space-related and high-tech economic development. EDC officials will assist NASA with disseminating information about potential partnership opportunities, as well as space-related and high-tech economic development, and increase awareness of Kennedy’s Engineering and Technology Directorate collaboration initiatives. They also will promote the commercial use of underutilized facilities at Kennedy. NASA and the EDC entered into their first economic cooperation agreement in 2005. For more information about the Economic Development Commission (EDC) of Florida’s Space Coast, visit http://www.spacecoastedc.org/. Photo credit: NASA/Jim Grossmann

Stellar Works: Searching for the Lives of Women in Science

NASA Astrophysics Data System (ADS)

Woodman, Jennifer Elizabeth

While women have had a profound impact in the world of science, they struggle to gain an equal foothold in many science, technology, engineering, and mathematics (STEM) fields today. This has led to considerable public and private sector efforts to recruit women into these arenas. In order to understand how schools and nonprofits engage today's young women in STEM studies, this account includes time spent both in high school science classrooms and with ChickTech--a Portland-based organization that works to provide a pathway into tech careers for high school-aged girls. A historical perspective reveals that modern women aren't treading into completely uncharted territory, in spite of the current disparity of representation in today's STEM arenas. This perspective is offered via an examination of the lives of a group of extraordinary women who worked in astronomy at Harvard College Observatory from the late 1800s into the 1960s. While several noteworthy women are discussed, the focus here is on Cecilia Payne, the first person to earn a Ph.D. in astronomy at Harvard, and one of the 20th century's greatest astronomers. A great many people have never heard of her...yet.

Manipulating presence influences the magnitude of virtual reality analgesia.

PubMed

Hoffman, Hunter G; Sharar, Sam R; Coda, Barbara; Everett, John J; Ciol, Marcia; Richards, Todd; Patterson, David R

2004-09-01

Excessive pain during medical procedures performed in unanesthetized patients is frequently reported, but can be reduced with virtual reality (VR) distraction. Increasing the person's illusion of going into the virtual world may increase how effectively VR distracts pain. Healthy volunteers aged 18-20 years participated in a double-blind between-groups design. Each subject received a brief baseline thermal pain stimulus, and the same stimulus again minutes later with either a Low Tech or a High Tech VR distraction. Each subject provided subjective 0-10 ratings of cognitive, sensory and affective components of pain, and rated their illusion of going inside the virtual world. Subjects in the High Tech VR group reported a stronger illusion of going into the virtual world (VR presence) than subjects in the Low Tech VR group, (4.2 vs. 2.5, respectively, P = 0.009) and more pain reduction (reduction of worst pain is 3.1 for High Tech VR vs. 0.7 for Low Tech VR, P < 0.001). Across groups, the amount of pain reduction was positively and significantly correlated with VR presence levels reported by subjects ( r = 0.48 for 'worst pain', P < 0.005).

LED traffic signal management system : tech summary.

DOT National Transportation Integrated Search

2016-06-01

The light source of a signal module is comprised of an array of multiple individual light emitting diodes (LEDs). : Fading of the array over its operational life is a serious concern of traffic engineers throughout the nation. The : Institute of Tran...

Novel Alternative Cementitious Maerials for Development of the Next Generation of Sustainable Transportation Infrastructure[Tech Brief

DOT National Transportation Integrated Search

2015-10-01

Georgia Institute of Technology and collaborators from Oklahoma State University, Tourney Consulting, and the Army Corps of Engineers, for an Exploratory Advanced Research (EAR) Program project funded by the Federal Highway Administrations (FHWA...

Five Lectures on Nuclear Reactors Presented at Cal Tech

DOE R&D Accomplishments Database

Weinberg, Alvin M.

1956-02-10

The basic issues involved in the physics and engineering of nuclear reactors are summarized. Topics discussed include theory of reactor design, technical problems in power reactors, physical problems in nuclear power production, and future developments in nuclear power. (C.H.)

Displacement in new economy labor markets: Post-displacement wage loss in high tech versus low tech cities.

PubMed

Davis, Daniel J; Rubin, Beth A

2016-11-01

While scholars and politicians tout education as the salve to employment disruptions, we argue that the geography of the new economy, and the social closure mechanisms that geography creates, may be just as important as individuals' characteristics for predicting post-displacement wage loss (or gain). We use data from the 2012 Displaced Workers ement of the Current Population Survey and from the 2010 United States Census to test hypotheses linking local labor markets in different industrial contexts to post-displacement wage loss. Our results point to age as a closure mechanism, and to the partially protective effect of education in high-tech versus low-tech economic sectors. This study is the first to use national level data to examine how employment in high-tech cities influences post-displacement wages. These findings are relevant both for theorizing about the new economy and for public policy. Copyright © 2016 Elsevier Inc. All rights reserved.

Denver airport pumping systems achieve optimal [Delta] T's

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mannion, G.F.; Krist, G.D.

1994-07-01

This article describes how the pumping and generating systems at the new Denver Airport operate efficiently with the user loops in the buildings producing design temperature rise at all load levels. Fifteen miles east of Denver's Stapleton International Airport lies the newly completed Denver International Airport (DIA)--the world's largest and most high-tech airport. Besides being one of the largest construction projects in the works, it has many of the latest technical innovations available. Of particular interest to the HVAC industry is the design of the heating and cooling water systems. These systems provide environmental cooling and heating water to themore » three concourses, the airport office building, and the main terminal. The mechanical engineers for the project were all from the Denver area. The central plant design was the work of Behrent Engineering Co.; the three concourses were designed by Swanson-Rink Associates; and the main terminal and administrative office building were designed by Abeyta Engineering Consultants. The overall system concept was developed during the initial design phase by engineers from these firms, members of the DIA staff, and application engineers from several manufacturers.« less

KSC-04PD-1055

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- STS-114 Mission Specialist Charles Camarda and Boeing Tech Operations Team Manager Matthew McClelland look at an engine on a visit to the Space Shuttle Main Engine Shop at KSC. He and other crew members touring several areas on the Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

KSC-04pd1055

NASA Image and Video Library

2004-05-07

KENNEDY SPACE CENTER, FLA. -- STS-114 Mission Specialist Charles Camarda and Boeing Tech Operations’ Team Manager Matthew McClelland look at an engine on a visit to the Space Shuttle Main Engine Shop at KSC. He and other crew members touring several areas on the Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

The 1990-1991 project summaries

NASA Technical Reports Server (NTRS)

1991-01-01

Georgia Tech's School of Textile & Fiber Engineering and School of Mechanical Engineering participated in four cooperative design efforts this year. One group designed a thermal shield for a lunar telescope. The second group designed a selenotextile habitat shielding structure. The third group designed a pneumatically assisted elbow joint for the NASA zero-prebreathe suit (ZPS). The final group designed an electromechanical system to power an astronaut's finger joints. Summaries of these projects are presented.

The 1990-1991 project summaries

NASA Astrophysics Data System (ADS)

Georgia Tech's School of Textile & Fiber Engineering and School of Mechanical Engineering participated in four cooperative design efforts this year. One group designed a thermal shield for a lunar telescope. The second group designed a selenotextile habitat shielding structure. The third group designed a pneumatically assisted elbow joint for the NASA zero-prebreathe suit (ZPS). The final group designed an electromechanical system to power an astronaut's finger joints. Summaries of these projects are presented.

Tradeoffs Between Synchronization, Communication, and Work in Parallel Linear Algebra Computations

DTIC Science & Technology

2014-01-25

Demmel Electrical Engineering and Computer Sciences University of California at Berkeley Technical Report No. UCB/EECS-2014- 8 http...www.eecs.berkeley.edu/Pubs/TechRpts/2014/EECS-2014- 8 .html January 25, 2014 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...University of California at Berkeley,Electrical Engineering and Computer Sciences,Berkeley,CA,94720 8 . PERFORMING ORGANIZATION REPORT NUMBER 9. SPONSORING

Electromagnetic Pulse (EMP) Handbook for Air Force Communications Service Communications-Electronics-Meteorological Engineers

DTIC Science & Technology

1976-11-01

protec- tion and will require additional measures, such as the application of conductive filter-loaded plastic resins to each joint connection...Lawrence Liver- more Laboratory, Livermore CA, 1974 31. Whitson, A. L., "DCA HEMP Hardness Certification Methodology Status", Stanford Research...of Chief of Engineers, Depot of the Army, December 1971 34. "Development of HEMP Assessment Methodology for Satellite Terminals", Intelcom Rad Tech

Urban construction and safety project

NASA Technical Reports Server (NTRS)

Hogarth, P. T.

1976-01-01

Technology utilization projects in the area of urban construction and safety included the following: development of undercarpet and baseboard flat conductor cables, flood insurance studies, tornado safety engineering, the Project TECH house at the Langley Research Center, assistance to the City of Atlanta in their environmental habitability and resource allocation program, and market assessment of a solid state diesel engine controller. The flat conductor cable and the flood insurance studies are given particular attention.

Effect of Nanotechnology Instructions on Senior High School Students

ERIC Educational Resources Information Center

Lu, Chow-Chin; Sung, Chia-Chi

2011-01-01

In this research, we cooperate with senior high school teachers to understand current nanotechnology model of senior high school nanotechnology curriculum in Taiwan. Then design senior high school nanotechnology (nano-tech) curriculum to teach 503 senior high school students. After teaching the nano-tech curriculum we use the "Nanotechnology…

Supersonics Project - Airport Noise Tech Challenge

NASA Technical Reports Server (NTRS)

Bridges, James

2010-01-01

The Airport Noise Tech Challenge research effort under the Supersonics Project is reviewed. While the goal of "Improved supersonic jet noise models validated on innovative nozzle concepts" remains the same, the success of the research effort has caused the thrust of the research to be modified going forward in time. The main activities from FY06-10 focused on development and validation of jet noise prediction codes. This required innovative diagnostic techniques to be developed and deployed, extensive jet noise and flow databases to be created, and computational tools to be developed and validated. Furthermore, in FY09-10 systems studies commissioned by the Supersonics Project showed that viable supersonic aircraft were within reach using variable cycle engine architectures if exhaust nozzle technology could provide 3-5dB of suppression. The Project then began to focus on integrating the technologies being developed in its Tech Challenge areas to bring about successful system designs. Consequently, the Airport Noise Tech Challenge area has shifted efforts from developing jet noise prediction codes to using them to develop low-noise nozzle concepts for integration into supersonic aircraft. The new plan of research is briefly presented by technology and timelines.

Tech-Prep/Associate Degree Program Guide: Tech Prep Associate Degree Program, Business Administration Associate Degree Program, Office Administration Associate Degree Program, Allied Health Associate Degree Program.

ERIC Educational Resources Information Center

Marmaras, Judy; Neri, Pat

The Tech-Prep Associate Degree Program (TPAD) at the Community College of Rhode Island (CCRI) in Warwick, is a high school/community college partnership providing high school students with an alternative program of study focused on goal setting, basic academic skills development, and the skills needed to pursue a career in a technical, business or…

Contextual Learning and Tech Prep Curriculum Integration.

ERIC Educational Resources Information Center

Edling, Walter

Because tech prep has the twin goals of preparing students for entry into postsecondary/continuing education or the work force after high school, tech prep programs require significant modification of conventional curricula and teaching methodologies. Both research and experience have demonstrated that the ability to transfer learning from one…

U.S. Army PEM fuel cell programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Patil, A.S.; Jacobs, R.

The United States Army has identified the need for lightweight power sources to provide the individual soldier with continuous power for extended periods without resupply. Due to the high cost of primary batteries and the high weight of rechargeable batteries, fuel cell technology is being developed to provide a power source for the individual soldier, sensors, communications equipment and other various applications in the Army. Current programs are in the tech base area and will demonstrate Proton Exchange Membrane (PEM) Fuel Cell Power Sources with low weight and high energy densities. Fuel Cell Power Sources underwent user evaluations in 1996more » that showed a power source weight reduction of 75%. The quiet operation along with the ability to refuel much like an engine was well accepted by the user and numerous applications were investigated. These programs are now aimed at further weight reduction for applications that are weight critical; system integration that will demonstrate a viable military power source; refining the user requirements; and planning for a transition to engineering development.« less

DESIGN AND PROTOTYPE OF A SUSTAINABLE EGG-WASHER

EPA Science Inventory

This project is part of the senior design course for Engineering Science and Mechanics at Virginia Tech. Anticipated results will be a working prototype chosen from multiple designs. We will include test results supporting our selection. We will characterize the stresses ex...

Monte Carlo Simulations of Microchannel Plate Based, Fast-Gated X-Ray Imagers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wu., M., Kruschwitz, C.

2011-02-01

This is a chapter in a book titled Applications of Monte Carlo Method in Science and Engineering Edited by: Shaul Mordechai ISBN 978-953-307-691-1, Hard cover, 950 pages Publisher: InTech Publication date: February 2011

High Tech, Low Tech and Education. Sociology of the School.

ERIC Educational Resources Information Center

Watkins, Peter

Designed to provide a link between academic thought and research and the practice of teaching, this monograph explores the appropriate educational response to technological change. The central argument of this study is that future job opportunities will lie essentially with low tech jobs, i.e., traditional, basic, industrial jobs, rather than the…

School-to-Work Apprenticeship. Project Manual 1993-1995.

ERIC Educational Resources Information Center

Lee Coll., Baytown, TX.

With 1993-94 and 1994-95 Perkins tech prep funds, Lee College, in cooperation with a consortium and local schools, planned, developed, and validated a school-to-work apprenticeship model for tech prep programs. The other educational partners were the Gulf Coast Tech Prep Consortium and nine high schools in eight area school districts. The…

LUVOIR Tech Notes

NASA Technical Reports Server (NTRS)

Bolcar, Matthew R.; Shaklan, Stuart; Roberge, Aki; Rioux, Norman; Feinberg, Lee; Werner, Michael; Rauscher, Bernard; Mandell, Avi; France, Kevin; Schiminovich, David

2016-01-01

We present nine "tech notes" prepared by the Large UV/Optical/Infrared (LUVOIR) Science and Technology Definition Team (STDT), Study Office, and Technology Working Group. These tech notes are intended to highlight technical challenges that represent boundaries in the trade space for developing the LUVOIR architecture that may impact the science objectives being developed by the STDT. These tech notes are intended to be high-level discussions of the technical challenges and will serve as starting points for more in-depth analysis as the LUVOIR study progresses.

Training the Future - Swamp Work Activities

NASA Image and Video Library

2017-07-19

In the Swamp Works laboratory at NASA's Kennedy Space Center in Florida, student interns, from the left, Jeremiah House, Thomas Muller and Austin Langdon are joining agency scientists, contributing in the area of Exploration Research and Technology. House is studying computer/electrical engineering at John Brown University in Siloam Springs, Arkansas. Muller is pursuing a degree in computer engineering and control systems and Florida Tech. Langdon is an electrical engineering major at the University of Kentucky. The agency attracts its future workforce through the NASA Internship, Fellowships and Scholarships, or NIFS, Program.

Donate | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Alumni | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Policies | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Tutoring | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

About | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Advising | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Business | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Contact | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Procedures | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Research | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Scholarships | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Community | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

News | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Training the Future - Swamp Work Activities

NASA Image and Video Library

2017-07-19

In the Swamp Works laboratory at NASA's Kennedy Space Center in Florida, student interns such as Thomas Muller, left, and Austin Langdon are joining agency scientists, contributing in the area of Exploration Research and Technology. Muller is pursuing a degree in computer engineering and control systems and Florida Tech. Langdon is an electrical engineering major at the University of Kentucky. The agency attracts its future workforce through the NASA Internship, Fellowships and Scholarships, or NIFS, Program.

Nonlinear Analysis of Squeeze Film Dampers Applied to Gas Turbine Helicopter Engines.

DTIC Science & Technology

1980-11-01

calculate the stability (complex roots) of a multi-level gas turbine with aero- dynamic excitation. This program has been applied to the space shuttle...such phenomena as oil film whirl. This paper devlops an analysis technique incorporating modal analysis and fast Fourier transform tech- niques to...USING A SQUEEZE FILM BEARING By M. A. Simpson Research Engineer L. E. Barrett Reserach Assistant Professor Department of Mechanical and Aerospace

Special Report: Vocational Training in the High-Tech Age.

ERIC Educational Resources Information Center

Mansnerus, Laura; And Others

1994-01-01

"New Pressures on Vocational Education" (Mansnerus) describes new forms (tech prep, career academies, apprenticeship, school enterprises); "Biotechnology Goes to High School" (Quinn) describes Berkeley High's Biotech Academy created by industry; and "Votech That Works" (Holusha) stresses the importance of specialized training for non-college-bound…

Engineering economic assessment of residential wood heating in NY

EPA Science Inventory

We provide insight into the recent resurgence in residential wood heating in New York by: (i) examining the lifetime costs of outdoor wood hydronic heaters (OWHHs) and other whole-house residential wood heat devices,(ii) comparing these lifetime costs with those of competing tech...

Improved guidance for users of the 1993 AASHTO flexible pavement design procedures : LTPP TechBrief

DOT National Transportation Integrated Search

1997-08-01

A key design challenge faced by engineers using the 1993 AASHTO Guide for Design of Pavement Structures (AASHTO Guide) is the determination of appropriate design parameters for the subgrade and pavement materials. The Long-Term Pavement Performance (...

HEAVY DUTY DIESEL VEHICLE LOAD ESTIMATION: DEVELOPMENT OF VEHICLE ACTIVITY OPTIMIZATION ALGORITHM

EPA Science Inventory

The Heavy-Duty Vehicle Modal Emission Model (HDDV-MEM) developed by the Georgia Institute of Technology(Georgia Tech) has a capability to model link-specific second-by-second emissions using speed/accleration matrices. To estimate emissions, engine power demand calculated usin...

The Milliken/Georgia Tech Rising Senior Summer Program.

ERIC Educational Resources Information Center

Agrawal, Pradeep K; Sommerfeld, Jude T.

1987-01-01

Describes the Rising Senior Program at the Georgia Institute of Technology, which is a cooperative education program designed to provide student interns with an opportunity to apply engineering principles to real problems related to the business interests of the Milliken textile manufacturing company. (TW)

Developing a method for estimating AADT on all Louisiana roads : [tech summary].

DOT National Transportation Integrated Search

2015-12-01

Annual Average Daily Tra c (AADT), the average daily volume of vehicle tra c on a highway or road, is an : important measure in transportation engineering. AADT is used in highway geometric design, pavement : design, tra c forecasting, and h...

AVTC Hosts TechnoCamp

ERIC Educational Resources Information Center

Miner, Brenda

2006-01-01

The Area Vo-Tech Center (AVTC) in Russellville, Arkansas, recently hosted its first TechnoCamp to encourage enrollment based on the aptitude and interest level of the students enrolling in the various programs. The center currently offers student enrollment in auto technology, computer engineering, cosmetology, construction technology, drafting…

Increasing Receipt of High-Tech/High-Cost Imaging and Its Determinants in the Last Month of Taiwanese Patients With Metastatic Cancer, 2001-2010: A Retrospective Cohort Study.

PubMed

Liu, Tsang-Wu; Hung, Yen-Ni; Soong, Thomas C; Tang, Siew Tzuh

2015-08-01

One strategy for controlling the skyrocketing costs of cancer care may be to target high-tech/high-cost imaging at the end of life (EOL). This population-based study investigated receipt of high-tech/high-cost imaging and its determinants for Taiwanese patients with metastatic cancer in their last month of life.Individual patient-level data were linked with encrypted identification numbers from computerized administrative data in Taiwan, that is, the National Register of Deaths Database, Cancer Registration System database, and National Health Insurance claims datasets, Database of Medical Care Institutions Status, and national census statistics (population/household income). We identified receipt of computerized tomography (CT), magnetic resonance imaging (MRI), positron emission tomography (PET), and radionuclide bone scans (BSs) for 236,911 Taiwanese cancer decedents with metastatic disease, 2001 to 2010. Associations of patient, physician, hospital, and regional factors with receiving CT, MRI, and bone scan in the last month of life were evaluated by multilevel generalized linear-mixed models.Over one-third (average [range]: 36.11% [33.07%-37.31%]) of patients with metastatic cancer received at least 1 high-tech/high-cost imaging modality in their last month (usage rates for CT, MRI, PET, and BS were 31.05%, 5.81%, 0.25%, and 8.15%, respectively). In 2001 to 2010, trends of receipt increased for CT (27.96-32.22%), MRI (4.34-6.70%), and PET (0.00-0.62%), but decreased for BS (9.47-6.57%). Facilitative determinants with consistent trends for at least 2 high-tech/high-cost imaging modalities were male gender, younger age, married, rural residence, lung cancer diagnosis, dying within 1 to 2 years of diagnosis, not under medical oncology care, and receiving care at a teaching hospital with a larger volume of terminally ill cancer patients and greater EOL care intensity. Undergoing high-tech/high-cost imaging at EOL generally was not associated with regional characteristics, healthcare resources, and EOL care intensity.To more effectively use high-tech/high-cost imaging at EOL, clinical and financial interventions should target nonmedical oncologists/hematologists affiliated with teaching hospitals that tend to aggressively treat high volumes of terminally ill cancer patients, thereby avoiding unnecessary EOL care spending and transforming healthcare systems into affordable high-quality cancer care delivery systems.

Geophysical Data from Offshore of the Chandeleur Islands, Eastern Mississippi Delta

USGS Publications Warehouse

Baldwin, Wayne E.; Pendleton, Elizabeth A.; Twichell, David C.

2009-01-01

This report contains the geophysical and geospatial data that were collected during two cruises on the R/V Acadiana along the eastern, offshore side of the Chandeleur Islands in 2006 and 2007. Data were acquired with the following equipment: a Systems Engineering and Assessment, Ltd., SwathPlus interferometric sonar; a Klein 3000 dual-frequency sidescan sonar; and an EdgeTech 512i chirp sub-bottom profiling system. The long-term goal of this mapping effort is to produce high-quality, high-resolution geologic maps and geophysical interpretations that can be utilized to investigate the impact of Hurricane Katrina, identify sand resources within the region, and make predictions regarding the future evolution of this coastal system.

ADOPT: Automotive Deployment Options Projection Tool | Transportation

Science.gov Websites

new model options by combining high-selling powertrains and high-selling vehicle platforms. NREL has . Screenshot of the ADOPT user interface, with two simulation scenario options (low tech and high tech emissions. Biomass Market Dynamics Supporting the Large-Scale Deployment of High-Octane Fuel Production in

From High School to College to Work: Students with Disabilities in High Tech Fields.

ERIC Educational Resources Information Center

Burgstahler, Sheryl; Wild, Nellie; Smallman, Julie

This paper describes DO-IT (Disabilities, Opportunities, Internetworking and Technology), a cooperative program of the University of Washington and the High School/High Tech program to increase the career success of individuals with disabilities by providing access to technology, career preparation activities, and work experiences. DO-IT works…

Learning Where They Teach

ERIC Educational Resources Information Center

Robelen, Erik W.

2007-01-01

In 2004, High Tech High, a charter school chain based in San Diego, California, became the state's first charter-management organization (CMO) to gain state approval to operate its own teacher-credentialing program. It is not stopping there. In August, it will cut the ribbon on the High Tech High graduate school of education, which appears to be…

Employment and Earnings in High-Tech Ethnic Niches

ERIC Educational Resources Information Center

Lee, Jennifer C.

2013-01-01

The increase in high-skilled immigrants to the United States coincided with the expansion of the high-technology sector, and now a large share of Asian immigrants concentrate in high-tech industries. Despite much research on the relationship between ethnic concentration and labor market outcomes, the association between ethnic niche employment and…

X-traktor: A Rookie Robot, Simple, Yet Complex, Impeccably Designed, a Very Innovative Multidisciplinary Engineering Masterpiece

NASA Technical Reports Server (NTRS)

Henderson, A. J., Jr.

2001-01-01

FIRST is the acronym of For Inspiration and Recognition of Science and Technology. FIRST is a 501.C.3 non-profit organization whose mission is to generate an interest in science and engineering among today's young adults and youth. This mission is accomplished through a robot competition held annually in the spring of each year. NASAs Marshall Space Flight Center, Education Programs Department, awarded a grant to Lee High School, the sole engineering magnet school in Huntsville, Alabama. MSFC awarded the grant in hopes of fulfilling its goal of giving back invaluable resources to its community and engineers, as well as educating tomorrow's work force in the high-tech area of science and technology. Marshall engineers, Lee High School students and teachers, and a host of other volunteers and parents officially initiated this robot design process and competitive strategic game plan. The FIRST Robotics Competition is a national engineering contest, which immerses high school students in the exciting world of science and engineering. Teaming with engineers from government agencies, businesses, and universities enables the students to learn about the engineering profession. The students and engineers have six weeks to work together to brainstorm, design, procure, construct, and test their robot. The team then competes in a spirited, 'no-holds barred' tournament, complete with referees, other FIRST-designed robots, cheerleaders, and time clocks. The partnerships developed between schools, government agencies, businesses, and universities provide an exchange of resources and talent that build cooperation and expose students to new and rewarding career options. The result is a fun, exciting, and stimulating environment in which all participants discover the important connections between classroom experiences and real-world applications. This paper will highlight the story, engineering development, and evolutionary design of Xtraktor, the rookie robot, a manufacturing marvel and engineering achievement.

High Technology in the High School and Its Effect on Curriculum.

ERIC Educational Resources Information Center

Rizzolo, Ralph M.

The development and implementation of a high-tech laboratory in a small suburban high school in Pequannock Township, New Jersey, demonstrates that the high-tech future is both possible and valuable as it permeates the entire curriculum. In 1984, the vocational studies department shifted its emphasis to prepare students for college as well as for…

Surface Temperature Measurements from a Stator Vane Doublet in a Turbine Engine Afterburner Flame using Ultra-Bright Cr-Doped GdAlO3 Thermographic Phosphor

NASA Technical Reports Server (NTRS)

Eldridge, Jeffrey I.; Jenkins, Thomas P.; Allison, Stephen W.; Wolfe, Douglas E.; Howard, Robert P.

2013-01-01

Luminescence-based surface temperature measurements from an ultra-bright Cr-doped GdAlO3 perovskite (GAP:Cr) coating were successfully conducted on an air-film-cooled stator vane doublet exposed to the afterburner flame of a J85 test engine at University of Tennessee Space Institute (UTSI). The objective of the testing at UTSI was to demonstrate that reliable thermal barrier coating (TBC) surface temperatures based on luminescence decay of a thermographic phosphor could be obtained from the surface of an actual engine component in an aggressive afterburner flame environment and to address the challenges of a highly radiant background and high velocity gases. A high-pressure turbine vane doublet from a Honeywell TECH7000 turbine engine was coated with a standard electron-beam physical vapor deposited (EB-PVD) 200-m-thick TBC composed of yttria-stabilized zirconia (YSZ) onto which a 25-m-thick GAP:Cr thermographic phosphor layer was deposited by EB-PVD. The ultra-bright broadband luminescence from the GAP:Cr thermographic phosphor is shown to offer the advantage of over an order-of-magnitude greater emission intensity compared to rare-earth-doped phosphors in the engine test environment. This higher emission intensity was shown to be very desirable for overcoming the necessarily restricted probe light collection solid angle and for achieving high signal-to-background levels. Luminescence-decay-based surface temperature measurements varied from 500 to over 1000C depending on engine operating conditions and level of air film cooling.

Med-Tech Program. Tech Prep Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

Staff from DuSable High School in Chicago, Illinois, collaborated with Malcolm X College and three area hospitals to develop a medical technician training program focusing on career awareness and development of the basic reading and math skills needed for any career. A 3-year Med Tech curriculum for grades 9, 10, and 11 and a career awareness…

High Touch in a High-Tech World

ERIC Educational Resources Information Center

Gibson, Cindy L.

2009-01-01

In a world of high tech and low touch, it is easy for public relations programs to stray from tried-and-true interpersonal strategies long associated with solid communication planning. New technologies allow communications professionals to quickly send e-mails and telephone calls to selected groups. Social media sites provide users immediate…

Sino-Austrian High-Tech Acupuncture Network—Annual Report 2016

PubMed Central

Litscher, Gerhard

2017-01-01

The Sino-Austrian High-Tech Acupuncture Research Network was founded in 2005 and has been growing ever since. The network comprises many partners from China and is highly involved in research and education activities. This report introduces the network’s activities in the year 2016. PMID:28930227

Sino-Austrian High-Tech Acupuncture Network: Annual Report 2017

PubMed Central

2018-01-01

The Sino-Austrian High-Tech Acupuncture Research Network was founded in 2005 and has been growing ever since. The network comprises many partners from China and is highly involved in research and education activities. This report introduces the network’s activities in the year 2017. PMID:29329241

Considering High-Tech Exhibits?

ERIC Educational Resources Information Center

Routman, Emily

1994-01-01

Discusses a variety of high-tech exhibit media used in The Living World, an educational facility operated by The Saint Louis Zoo. Considers the strengths and weaknesses of holograms, video, animatronics, video-equipped microscopes, and computer interactives. Computer interactives are treated with special attention. (LZ)

Future Assets, Student Talent (FAST)

NASA Technical Reports Server (NTRS)

1992-01-01

Future Assets, Student Talent (FAST) motivates and prepares talented students with disabilities to further their education and achieve High Tech and professional employment. The FAST program is managed by local professionals, business, and industry leaders; it is modeled after High School High Tech project TAKE CHARGE started in Los Angeles in 1983. Through cooperative efforts of Alabama Department of Education, Vocational Rehabilitation, Adult and Children Services, and the President's Committee on Employment of People with Disabilities, north central Alabama was chosen as the second site for a High School High Tech project. In 1986 local business, industry, education, government agencies, and rehabilitation representatives started FAST. The program objectives and goals, results and accomplishments, and survey results are included.

Estimating setup of driven piles into Louisiana clayey soils : tech summary.

DOT National Transportation Integrated Search

2009-11-01

Geotechnical engineers and researchers (Seed and Reese 1955, Long et al. 1999, and Bullock et al. 2005) have reported for many years : that the axial capacity of a driven pile may increase over time, which is usually referred to as pile setup or free...

Estimating Setup of Piles Driven into Louisiana Clayey Soils : Tech Summary

DOT National Transportation Integrated Search

2009-11-01

Geotechnical engineers and researchers (Seed and Reese 1955, Long et al. 1999, and Bullock et al. 2005) have reported for many years that the axial capacity of a driven pile may increase over time, which is usually referred to as pile setup or freeze...

Pilot project - demonstration of capabilities and benefits of bridge load rating through physical testing : tech transfer summary.

DOT National Transportation Integrated Search

2013-08-01

This project demonstrated the capabilities for load testing bridges in Iowa, developed and presented a webinar to local and state engineers, and produced a spreadsheet and benefit evaluation matrix that others can use to preliminarily assess where br...

Electrical Engineering (Selected Articles).

DTIC Science & Technology

1980-05-15

Homopolar Machine with Sodium-Potassium Ring-Shaped Contacts, by L.A. Sukhanov , G.A. Karmonov .......... 19 ACCESSION forWht hieSeto NTISuf ecine 1DOCS...3663 FACE 19 DIFECT-CURRENT HOMOPOLAS AACHIhI ITH SCIIUM-ECIASSIUM RING-SHAPED CONTACTS L. A. Sukhanov , Cand. tech. sciences, G. A. Karmanov, eng. ThA

Sociocultural dilemma of Japanese steeplejacks.

PubMed

Iwata, H

1997-12-01

Japanese steeplejacks are good at working in high places as construction workers, and they have been called tobi for a longtime. They now play an important role in completing modern civil engineering projects and in the construction of high-rise buildings; however, their lifestyle is considered by most to be quaint but outdated. Originally, they were unskilled workmen at construction sites. In the 18th century, they were engaged in repairing houses or setting up scaffolding, helping carpenters, but they worked as firefighters whenever fires broke out. Their traditional work system did not change throughout the Meiji era, although Japanese society became greatly modernized. After World War II, the industrialization of Japanese society required highly developed technology in civil engineering and architecture. This provided an opportunity for them to establish their positions as trained professional workers. However, the number of skilled tobi professionals has continued to decrease because the younger generation does not consider this profession desirable career. Improving not only the professional skills but also the way of living to the extent as a modern high-tech society demands will be the key for the tobi's work system to become attractive.

High Tech Educators Network Evaluation.

ERIC Educational Resources Information Center

O'Shea, Dan

A process evaluation was conducted to assess the High Tech Educators Network's (HTEN's) activities. Four basic components to the evaluation approach were documentation review, program logic model, written survey, and participant interviews. The model mapped the basic goals and objectives, assumptions, activities, outcome expectations, and…

High-Tech Security Help.

ERIC Educational Resources Information Center

Flanigan, Robin L.

2000-01-01

Advocates embrace high-tech security measures as necessary to avoid Columbine-style massacres. Critics contend that school systems can go overboard, making students feel less safe and too closely scrutinized. Current electronic, biometric, and computer-mapping devices and school applications are discussed. Vendors are listed. (MLH)

Another Innovation from High Tech High--Embedded Teacher Training

ERIC Educational Resources Information Center

Griswold, Janie; Riordan, Rob

2016-01-01

High Tech High School's teaching internship program blends on-the-job work with classroom theory. Interns spend two years working as full teachers as they take courses. The program serves three large purposes: Train new teachers and build capacity in the HTH organization; train teachers in and beyond HTH for success in a wide range of contexts;…

Habitats and Surface Construction Technology and Development Roadmap

NASA Technical Reports Server (NTRS)

Cohen, Marc; Kennedy, Kriss J.

1997-01-01

The vision of the technology and development teams at NASA Ames and Johnson Research Centers is to provide the capability for automated delivery and emplacement of habitats and surface facilities. The benefits of the program are as follows: Composites and Inflatables: 30-50% (goal) lighter than Al Hard Structures; Capability for Increased Habitable Volume, Launch Efficiency; Long Term Growth Potential; and Supports initiation of commercial and industrial expansion. Key Habitats and Surface Construction (H&SC) technology issues are: Habitat Shell Structural Materials; Seals and Mechanisms; Construction and Assembly: Automated Pro-Deploy Construction Systems; ISRU Soil/Construction Equipment: Lightweight and Lower Power Needs; Radiation Protection (Health and Human Performance Tech.); Life Support System (Regenerative Life Support System Tech.); Human Physiology of Long Duration Space Flight (Health and Human Performance Tech.); and Human Psychology of Long Duration Space Flight (Health and Human Performance Tech.) What is being done regarding these issues?: Use of composite materials for X-38 CRV, RLV, etc.; TransHAB inflatable habitat design/development; Japanese corporations working on ISRU-derived construction processes. What needs to be done for the 2004 Go Decision?: Characterize Mars Environmental Conditions: Civil Engineering, Material Durability, etc.; Determine Credibility of Inflatable Structures for Human Habitation; and Determine Seal Technology for Mechanisms and Hatches, Life Cycle, and Durability. An overview encompassing all of the issues above is presented.

Mathematical logic as a mean of solving the problems of power supply for buildings and constructions

NASA Astrophysics Data System (ADS)

Pryadko, Igor; Nozdrina, Ekaterina; Boltaevsky, Andrey

2017-10-01

The article analyzes the questions of application of mathematical logic in engineering design associated with machinery and construction. The aim of the work is to study the logical working-out of Russian electrical engineer V.I. Shestakov. These elaborations are considered in connection with the problem of analysis and synthesis of relay contact circuits of the degenerate (A) class which the scientist solved. The article proposes to use Shestakov’s elaborations for optimization of buildings and constructions of modern high-tech. In the second part of the article the events are actualized in association with the development of problems of application of mathematical logic in the analysis and synthesis of electric circuits, relay and bridging. The arguments in favor of the priority of the authorship of the elaborations of Russian electrical engineer V. I. Shestakov, K. Shannon - one of the founders of computer science, and Japanese engineer A. Nakashima are discussed. The issue of contradiction between V. I. Shestakov and representatives of the school of M. A. Gavrilov is touched on.

Research Collaborations | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

GE Healthcare | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Software List | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Student Organizations | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Incoming Freshman | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Travel Directions | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Future Students | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Corporate Partners | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

EnQuest | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Computer Resources | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Strategic Planning | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

ANSYS Institute | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Career Fairs | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Current Students | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Undergraduate Curriculum | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Research Centers & Consortia | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Admissions - Graduate Students | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

FTC General Information | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Catalyst Grants: Sensing the Future | College of Engineering & Applied

Science.gov Websites

Science A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Corporate Services | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Computer Labs | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Study Abroad | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Structures Laboratory | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Multimedia Software Laboratory | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Center for Composite Materials | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Girls Who Code Club | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Admissions - Undergraduate Students | College of Engineering & Applied

Science.gov Websites

Science A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

2016 Milwaukee Engineering Research Conference | College of Engineering &

Science.gov Websites

Applied Science A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW Visit Apply Give to UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Graduate Curriculum | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Research Labs | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Product Realization | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Fast Facts | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Strategic Plan | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

College-Wide Support | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

50th Anniversary | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

FAQ's and Deadlines | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Office of Research Support | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Department Chairs and Staff | College of Engineering & Applied Science

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Examination of Various Methods Used in Support of Concurrent Engineering

DTIC Science & Technology

1990-03-01

1989. F.Y.I. Drawing a2Ther Productivity. Industrial Engineering 21: 80. Ishi82 Ishikawa , Kaoru . 1982. Guide to Quality Control. White Plains, NY: Kraus...observe it in practice have an easier time identifying the different methods or tech- niques (such as the Ishikawa tools) used than understanding the...simple histogram to show what prob- lems should be attacked first. Cause and Effect Diagrams Sometimes called the fishbone or Ishikawa diagrams-a kind

KSC-04pd1057

NASA Image and Video Library

2004-05-07

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Main Engine Shop at KSC, Boeing Tech Operations’ Team Manager Matthew McClelland (left) talks with STS-114 Pilot James Kelly. At right are Mission Specialists Wendy Lawrence and Charles Camarda. One of the main engines is in the background. Crew members are touring several areas on Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

KSC-04PD-1057

NASA Technical Reports Server (NTRS)

2004-01-01

KENNEDY SPACE CENTER, FLA. -- In the Space Shuttle Main Engine Shop at KSC, Boeing Tech Operations Team Manager Matthew McClelland (left) talks with STS-114 Pilot James Kelly. At right are Mission Specialists Wendy Lawrence and Charles Camarda. One of the main engines is in the background. Crew members are touring several areas on Center. The STS-114 mission is Logistics Flight 1, which is scheduled to deliver supplies and equipment plus the external stowage platform to the International Space Station.

Environmental Aspects of Dredging: What About Air Quality?

DTIC Science & Technology

2009-01-01

District, IL, 61204, PH (309) 794-5735 ext.6108, FAX: (309) 794-5 5712, email: mark.j.anderson@usace.army.mil 6 2Civil & Environmental Engineering Dept...Michigan Tech University , Houghton, MI 7 49931, PH: (906) 487-1981, FAX: (906) 487-2943, email: barkdoll@mtu.edu 8 9 ABSTRACT 10 Dredging has...the U. S. Army Corps of Engineers (USACE) dredged a total of 26 204.2 million cubic yards (CY) of sediment (NDC 2007). Navigation maintenance 27

Encouraging Girls into Science and Technology with Feminine Role Model: Does This Work?

NASA Astrophysics Data System (ADS)

Bamberger, Yael M.

2014-08-01

This study examines the effect of a program that aimed to encourage girls to choose a science, technology, engineering, and mathematics (STEM) career in Israel. The program involved school visits to a high-tech company and meeting with role model female scientists. Sixty ninth-grade female students from a Jewish modern-orthodox single-sex secondary school in the same city as the company participated in the study. The control group contained 30 girls from the same classes who did not participate in the program. Data were collected through pre-post questionnaires, observations, and focus group interviews. It was analyzed for three main themes: perceptions of scientists and engineers, capability of dealing with STEM, and future career choice. Findings indicated respect toward the women scientists as being smart and creative, but significant negative change on the perceptions of women scientists/engineers, the capability of dealing with STEM, and the STEM career choices. Possible causes for these results are discussed, as well as implications for education.

Integrated Technical Curriculum. Curriculum Developed for Project Second Chance II: Tech Reading, Tech Science, Tech Math, Automotive.

ERIC Educational Resources Information Center

Sorensen, Mary K.; And Others

This integrated technical curriculum is designed to enroll and retain adult high school noncompleters in occupational programs by providing them with the remedial and content-area reading instruction needed for success in an automotive program. The following topics are covered in the four units: (1) skills for reading technical materials (basics…

Soft Toys as Instructional Technology in Higher Education: The Case of Llewelyn the Lynx

ERIC Educational Resources Information Center

Raye, Lee

2017-01-01

Scholarship on instructive technologies in higher education has emphasized the use of high-tech facilitative technologies for long-term use, and low-tech props to illustrate single topics. This paper, on the contrary, discusses the use of a long-term, low-tech instructional technology: Llewelyn the Lynx was a soft animal used to assist with…

Optical Fiber High Temperature Sensor Instrumentation for Energy Intensive Industries

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, Kristie L.; Wang, Anbo; Pickrell, Gary R.

2006-11-14

This report summarizes technical progress during the program “Optical Fiber High Temperature Sensor Instrumentation for Energy Intensive Industries”, performed by the Center for Photonics Technology of the Bradley Department of Electrical and Computer Engineering at Virginia Tech. The objective of this program was to use technology recently invented at Virginia Tech to develop and demonstrate the application of self-calibrating optical fiber temperature and pressure sensors to several key energy-intensive industries where conventional, commercially available sensors exhibit greatly abbreviated lifetimes due primarily to environmental degradation. A number of significant technologies were developed under this program, including • a laser bonded silicamore » high temperature fiber sensor with a high temperature capability up to 700°C and a frequency response up to 150 kHz, • the world’s smallest fiber Fabry-Perot high temperature pressure sensor (125 x 20 μm) with 700°C capability, • UV-induced intrinsic Fabry-Perot interferometric sensors for distributed measurement, • a single crystal sapphire fiber-based sensor with a temperature capability up to 1600°C. These technologies have been well demonstrated and laboratory tested. Our work plan included conducting major field tests of these technologies at EPRI, Corning, Pratt & Whitney, and Global Energy; field validation of the technology is critical to ensuring its usefulness to U.S. industries. Unfortunately, due to budget cuts, DOE was unable to follow through with its funding commitment to support Energy Efficiency Science Initiative projects and this final phase was eliminated.« less

KSC-2011-7236

NASA Image and Video Library

2011-10-03

CAPE CANAVERAL, Fla. -- In the Press Site auditorium at NASA's Kennedy Space Center in Florida, managers from NASA and the Economic Development Commission (EDC) of Florida’s Space Coast pose for a portrait following the signing of a new five-year Space Act Agreement reaffirming the partnership of the two organizations. From left are Kennedy Space Center Director Robert Cabana, EDC President and CEO Lynda Weatherman, and Chairman of the Board of the EDC Bob Whelen. The agreement calls for NASA and EDC senior leadership to meet regularly to discuss economic development matters of mutual interest. Managers from Kennedy’s Center Planning and Development Office will work with the EDC on potential business partnerships and meet with business leaders and committees to address space-related and high-tech economic development. EDC officials will assist NASA with disseminating information about potential partnership opportunities, as well as space-related and high-tech economic development, and increase awareness of Kennedy’s Engineering and Technology Directorate collaboration initiatives. They also will promote the commercial use of underutilized facilities at Kennedy. NASA and the EDC entered into their first economic cooperation agreement in 2005. For more information about the Economic Development Commission (EDC) of Florida’s Space Coast, visit http://www.spacecoastedc.org/. Photo credit: NASA/Jim Grossmann

Building STEAM in Design-Related Technology

ERIC Educational Resources Information Center

Maldonado, Elaine; Pearson, Karen R.

2013-01-01

TECH-FIT is a National Science Foundation initiative at FIT, part of the State University of New York. An institution with over 85% female students, this interdisciplinary, design-related STEM (Science, Technology, Engineering, and Mathematics) project sought to increase inclusion and student performance in STEM. Building on new and existing…

Undergraduate Laboratory Module on Skin Diffusion

ERIC Educational Resources Information Center

Norman, James J.; Andrews, Samantha N.; Prausnitz, Mark R.

2011-01-01

To introduce students to an application of chemical engineering directly related to human health, we developed an experiment for the unit operations laboratory at Georgia Tech examining diffusion across cadaver skin in the context of transdermal drug delivery. In this laboratory module, students prepare mouse skin samples, set up diffusion cells…

Revving up Students' Skills with Motor sports

ERIC Educational Resources Information Center

Thomas, Ingrid

2008-01-01

Drag racing is just one of the exciting sporting activities that students enrolled in the Parkland College's Engineering Science and Technologies program get an opportunity in which to participate. The college, located in Champaign, Illinois, has provided affordable career-tech and academic education to area residents since 1966. This article…

Not Your Grandparents' Vocational School

ERIC Educational Resources Information Center

Schachter, Ron

2012-01-01

Manufacturing biodiesel fuel, building a geodesic-domed greenhouse, measuring the environmental impact of abandoned industrial canals--these might well fit the mission of cutting-edge companies specializing in green technologies, or they could be part of the curriculum at an institution of advanced science and engineering such as MIT or Cal Tech.…

Laser Pointers: Low-Cost, Low-Tech Innovative, Interactive Instruction Tool

ERIC Educational Resources Information Center

Zdravkovska, Nevenka; Cech, Maureen; Beygo, Pinar; Kackley, Bob

2010-01-01

This paper discusses the use of laser pointers at the Engineering and Physical Sciences Library, University of Maryland, College Park, as a personal response system (PRS) tool to encourage student engagement in and interactivity with one-shot, lecture-based information literacy sessions. Unlike more sophisticated personal response systems like…

NASA Tech Briefs, March 1995

NASA Technical Reports Server (NTRS)

1995-01-01

This issue contains articles with a special focus on Computer-Aided design and engineering amd a research report on the Ames Research Center. Other subjects in this issue are: Electronic Components and Circuits, Electronic Systems, Physical Sciences, Materials, Computer Programs, Mechanics, Machinery, Manufacturing/Fabrication, Mathematics and Information Sciences and Life Sciences

An optimal contract approach to hospital financing.

PubMed

Boadway, Robin; Marchand, Maurice; Sato, Motohiro

2004-01-01

Existing models of hospital financing advocate mixed schemes which include both lump-sum and cost-based payments. The doctor is generally the unique decision maker, which is unrealistic in a hospital setting where both managers and doctors are involved. This paper develops a model in which managers and doctors are responsible for different decisions within the hospital. In this model, public authorities who provide the financing, hospital managers who allocate resources within the hospital, and doctors who assign patients to either a low-tech or a high-tech therapy have information of increasing quality on the casemix of patients. The public authorities sign with hospital managers contracts specifying some lump-sum financing and some size of a high-tech equipment. In turn, managers, who know the broad mix of patients in the hospital, sign with hospital doctors contracts that specify the non-medical resources allocated to this facility as well as some remuneration. Doctors, who know each patient's illness severity, select the patients to be treated by the high-tech facility, and receive from public authorities some fee-for-service payment that is differentiated according to the low- or high-tech treatment used for curing their patients. What emerges is a two-stage agency problem in which contracts are designed to elicit information in the most efficient way.

Increasing Receipt of High-Tech/High-Cost Imaging and Its Determinants in the Last Month of Taiwanese Patients With Metastatic Cancer, 2001–2010

PubMed Central

Liu, Tsang-Wu; Hung, Yen-Ni; Soong, Thomas C.; Tang, Siew Tzuh

2015-01-01

Abstract One strategy for controlling the skyrocketing costs of cancer care may be to target high-tech/high-cost imaging at the end of life (EOL). This population-based study investigated receipt of high-tech/high-cost imaging and its determinants for Taiwanese patients with metastatic cancer in their last month of life. Individual patient-level data were linked with encrypted identification numbers from computerized administrative data in Taiwan, that is, the National Register of Deaths Database, Cancer Registration System database, and National Health Insurance claims datasets, Database of Medical Care Institutions Status, and national census statistics (population/household income). We identified receipt of computerized tomography (CT), magnetic resonance imaging (MRI), positron emission tomography (PET), and radionuclide bone scans (BSs) for 236,911 Taiwanese cancer decedents with metastatic disease, 2001 to 2010. Associations of patient, physician, hospital, and regional factors with receiving CT, MRI, and bone scan in the last month of life were evaluated by multilevel generalized linear-mixed models. Over one-third (average [range]: 36.11% [33.07%–37.31%]) of patients with metastatic cancer received at least 1 high-tech/high-cost imaging modality in their last month (usage rates for CT, MRI, PET, and BS were 31.05%, 5.81%, 0.25%, and 8.15%, respectively). In 2001 to 2010, trends of receipt increased for CT (27.96–32.22%), MRI (4.34–6.70%), and PET (0.00–0.62%), but decreased for BS (9.47–6.57%). Facilitative determinants with consistent trends for at least 2 high-tech/high-cost imaging modalities were male gender, younger age, married, rural residence, lung cancer diagnosis, dying within 1 to 2 years of diagnosis, not under medical oncology care, and receiving care at a teaching hospital with a larger volume of terminally ill cancer patients and greater EOL care intensity. Undergoing high-tech/high-cost imaging at EOL generally was not associated with regional characteristics, healthcare resources, and EOL care intensity. To more effectively use high-tech/high-cost imaging at EOL, clinical and financial interventions should target nonmedical oncologists/hematologists affiliated with teaching hospitals that tend to aggressively treat high volumes of terminally ill cancer patients, thereby avoiding unnecessary EOL care spending and transforming healthcare systems into affordable high-quality cancer care delivery systems. PMID:26266390

Exploring Astrobiology: Future and In-Service Teacher Research Experiences

NASA Astrophysics Data System (ADS)

Cola, J.; Williams, L. D.; Snell, T.; Gaucher, E.; Harris, B.; Usselman, M. C.; Millman, R. S.

2009-12-01

The Georgia Tech Center for Ribosome Adaptation and Evolution, a center funded by the NASA Astrobiology Institute, developed an educational Astrobiology program titled, “Life on the Edge: Astrobiology.” The purpose of the program was to provide educators with the materials, exposure, and skills necessary to prepare our future workforce and to foster student interest in scientific discovery on Earth and throughout the universe. A one-week, non-residential summer enrichment program for high school students was conducted and tested by two high school educators, an undergraduate student, and faculty in the Schools of Biology, and Chemistry and Biochemistry at Georgia Tech. In an effort to promote and encourage entry into teaching careers, Georgia Tech paired in-service teachers in the Georgia Intern-Fellowship for Teachers (GIFT) program with an undergraduate student interested in becoming a teacher through the Tech to Teaching program. The GIFT and Tech to Teaching fellows investigated extremophiles which have adapted to life under extreme environmental conditions. As a result, extremophiles became the focus of a week-long, “Life on the Edge: Astrobiology” curriculum aligned with the Georgia Performance Standards in Biology. Twenty-five high school students explored the adaptation and survival rates for various types of extremophiles exposed to UV radiation and desiccation; students were also introduced to hands-on activities and techniques such as genomic DNA purification, gel electrophoresis, and Polymerase Chain Reaction (PCR). The impact on everyone invested and involved in the Astrobiology program including the GIFT and Tech to Teaching fellows, high school students, and faculty are discussed.

Center for By-Products Utilization (CBU) | College of Engineering & Applied

Science.gov Websites

Science A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Design of Choking Cascade Turns.

DTIC Science & Technology

1982-12-01

L D-R124 792 DESIGN OF CHOK~ING CASCADE TURNSCU) AIR FORCE INST OF v TECH MRIGHT-PAT1TERSON AFB OH SCHOOL OF ENGINEERING J BAIRD DEC 82 AFIT/GRE/AA...82D- 3 DESIGN OF CHOKING *’ CASCADE TURNS THESIS Presented to the Faculty of the School of Enqineerinq of the Air Force Institute of Technoloqy Air ...Approved for public release; distribution unlimited 4* Preface Ramjet engines are being considered by both the Air Force and Navy for tactical air

Implementation of an Open-Loop Rule-Based Control Strategy for a Hybrid-Electric Propulsion System On a Small RPA

DTIC Science & Technology

2011-03-01

input spindle from the engine to over tighten and apply an even greater amount of resistance to the engine shaft . Not only was this dangerous to...Mengistu, Todd Rotramel, and Matt Rippl, all of whom worked together with me to design and build the test rig for our dynamometer setup. Countless...hours were spent together planning and executing the design and building the stand itself. The AFIT machine shop crew and ENY lab techs also

Toward healthy prisons: the TECH model and its applications.

PubMed

Ross, Michael W; Jo Harzke, Amy

2012-01-01

This paper aims to explore how the TECH Model (testing for and treating infectious diseases and vaccination; environmental modification to prevent disease transmission; chronic disease identification and treatment; and health maintenance and education) can be used for assessing and achieving healthy prisons. This paper explores the concepts of "health in prison" and "healthy prisons" in the context of recent research and guidance. The paper then considers the TECH Model as an approach to achieving healthy prisons. Under each of the four TECH Model domains are tasks to achieve a healthy prison. For prisons with poor or no resources, each domain contains steps that will improve prison health and move towards a healthy prison for both prisoners and staff. Implementation can thus be "low-TECH" or "high-TECH" depending on the setting and the available resources and the model is specifically designed to provide options for resource-poor as well as resource-rich correctional settings. The TECH Model is a first step in characterizing the components of a healthy prison and the processes to achieve this. This Model could be implemented in all levels of prisons internationally.

Re-conceptualsing Learning Spaces: Developing Capabilities in a High-Tech Small Firm.

ERIC Educational Resources Information Center

Macpherson, Allan; Jones, Ossie; Zhang, Michael; Wilson, Alison

2003-01-01

A case study of a small high-tech business explains how they created a virtual cluster of innovation through supply networks, enhancing their own learning and facilitating integration of knowledge. This process overcomes limitations to management learning for small companies in isolated regions. (Contains 66 references.) (SK)

Asia's New High-Tech Competitors: An SRS Special Report.

ERIC Educational Resources Information Center

Rausch, Lawrence M.

This report profiles nine economies linked by Asian identity, yet marked by great economic and technological disparity, in order to project which economies will be full-fledged participants and competitors in tomorrow's high-tech product markets. Based on the various indicators of technological activity and competitiveness presented in this…

Perceptions of Diversity Training Needs in High Tech Business.

ERIC Educational Resources Information Center

Lieberman, Devorah A.; Gurtov, Ellene

A study questioned 12 human resource personnel, corporation managers, and diversity trainers about their perceptions of diversity training needs in Pacific Northwest high tech organizations. The overarching research questions for the study were as follows: (1) What are the most frequently reported diversity training needs among human resource…

Implementing a Project-Based Technology Program for High School Women.

ERIC Educational Resources Information Center

Boudria, Theodore J.

2002-01-01

Describes the successful implementation of a Women in Technology (WIT) Project-Based Learning Program in High Tech Manufacturing by the Tech Prep Consortium at Bristol Community College (Massachusetts). Reports that the program's success was mainly due to the establishment of partnerships with industry, government, and education, including area…

Aphasia vs. Apraxia

MedlinePlus

... tech system – Paper and pencil High-tech system – Computer program that produces voice output at keystroke Oral ... for Aphasia Actions Speak as Loud as Words Computers & Language Rehab From Singing to Speaking When the ...

KSC-2012-2766

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Students view a demonstration by Dr. James Fesmire inside the cryogenics lab in the Operations and Checkout Building. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

KSC-2012-2767

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Outside the Operations and Checkout Building, Rudy Werlink gives students a first-hand look at the workings of the cryogenics lab. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

KSC-2012-2765

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Students and their teachers get some hands-on experience inside the applied physics lab in the Operations and Checkout Building. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

A Policy-Relevant Instrumental Case Study of an Inclusive STEM-Focused High School: Manor New Tech High

ERIC Educational Resources Information Center

Lynch, Sharon J.; Spillane, Nancy; House, Ann; Peters-Burton, Erin; Behrend, Tara; Ross, Kathleen M.; Han, Edmund M.

2017-01-01

This instrumental case study of Manor New Tech High (MNTH) provides insight and understanding of a trend in U.S. education to create new STEM schools and increase the achievement of students underrepresented in STEM. MNTH was an inclusive, STEM-focused high school, in Manor, Texas. The creation of the school was stimulated by a statewide Texas…

Evaluation of Geopolymer Concrete for Rocket Test Facility Flame Deflectors

NASA Technical Reports Server (NTRS)

Allgood, Daniel C.; Montes, Carlos; Islam, Rashedul; Allouche, Erez

2014-01-01

The current paper presents results from a combined research effort by Louisiana Tech University (LTU) and NASA Stennis Space Center (SSC) to develop a new alumina-silicate based cementitious binder capable of acting as a high performance refractory material with low heat ablation rate and high early mechanical strength. Such a binder would represent a significant contribution to NASA's efforts to develop a new generation of refractory 'hot face' liners for liquid or solid rocket plume environments. This project was developed as a continuation of on-going collaborations between LTU and SSC, where test sections of a formulation of high temperature geopolymer binder were cast in the floor and walls of Test Stand E-1 Cell 3, an active rocket engine test stand flame trench. Additionally, geopolymer concrete panels were tested using the NASA-SSC Diagnostic Test Facility (DTF) thruster, where supersonic plume environments were generated on a 1ft wide x 2ft long x 6 inch deep refractory panel. The DTF operates on LOX/GH2 propellants producing a nominal thrust of 1,200 lbf and the combustion chamber conditions are Pc=625psig, O/F=6.0. Data collected included high speed video of plume/panel area and surface profiles (depth) of the test panels measured on a 1-inch by 1-inch giving localized erosion rates during the test. Louisiana Tech conducted a microstructure analysis of the geopolymer binder after the testing program to identify phase changes in the material.

LanzaTech- Capturing Carbon. Fueling Growth.

ScienceCinema

NONE

2018-01-16

LanzaTech will design a gas fermentation system that will significantly improve the rate at which methane gas is delivered to a biocatalyst. Current gas fermentation processes are not cost effective compared to other gas-to-liquid technologies because they are too slow for large-scale production. If successful, LanzaTech's system will process large amounts of methane at a high rate, reducing the energy inputs and costs associated with methane conversion.

High-Tech, Low-Tech, No-Tech: Communications Strategies During Blackouts

DTIC Science & Technology

2013-12-01

share radiation measurements; it was created within a week of the Fukushima nuclear disaster . More than 3.5 million data readings have already been...national nuclear crisis, especially as the extent of the disaster at the Fukushima Daiichi plant became known. This is where hyper-local communication...accompany major crises, particularly natural disasters such as severe weather events. Thus, during crises, communications are often severely hampered

Memory function and supportive technology

PubMed Central

Charness, Neil; Best, Ryan; Souders, Dustin

2013-01-01

Episodic and working memory processes show pronounced age-related decline, with other memory processes such as semantic, procedural, and metamemory less affected. Older adults tend to complain the most about prospective and retrospective memory failures. We introduce a framework for deciding how to mitigate memory decline using augmentation and substitution and discuss techniques that change the user, through mnemonics training, and change the tool or environment, by providing environmental support. We provide examples of low-tech and high-tech memory supports and discuss constraints on the utility of high-tech systems including effectiveness of devices, attitudes toward memory aids, and reliability of systems. PMID:24379752

Integration of instrumentation and processing software of a laser speckle contrast imaging system

NASA Astrophysics Data System (ADS)

Carrick, Jacob J.

Laser speckle contrast imaging (LSCI) has the potential to be a powerful tool in medicine, but more research in the field is required so it can be used properly. To help in the progression of Michigan Tech's research in the field, a graphical user interface (GUI) was designed in Matlab to control the instrumentation of the experiments as well as process the raw speckle images into contrast images while they are being acquired. The design of the system was successful and is currently being used by Michigan Tech's Biomedical Engineering department. This thesis describes the development of the LSCI GUI as well as offering a full introduction into the history, theory and applications of LSCI.

A World of Competitors: Assessing the US High-Tech Advantage and the Process of Globalisation

ERIC Educational Resources Information Center

Douglass, John Aubrey

2008-01-01

Research universities throughout the world are part of a larger effort by countries to bolster science and technological innovation and compete economically. The United States remains highly competitive as a source of high-tech innovation because of a number of market positions, many the results of long-term investments in institutions (such as…

Impacts of Academic R&D on High-Tech Manufacturing Products: Tentative Evidence from Supercomputer Data

ERIC Educational Resources Information Center

Le, Thanh; Tang, Kam Ki

2015-01-01

This paper empirically examines the impact of academic research on high-tech manufacturing growth of 28 Organisation for Economic Co-operation and Development (OECD) and emerging countries over the 1991-2005 period. A standard research and development (R&D) expenditure based measure is found to be too general to capture the input in high-tech…

Phonon Spectrum Engineering in Rolled-up Micro- and Nano-Architectures

DOE PAGES

Fomin, Vladimir M.; Balandin, Alexander A.

2015-10-10

We report on a possibility of efficient engineering of the acoustic phonon energy spectrum in multishell tubular structures produced by a novel high-tech method of self-organization of micro- and nano-architectures. The strain-driven roll-up procedure paved the way for novel classes of metamaterials such as single semiconductor radial micro- and nano-crystals and multi-layer spiral micro- and nano-superlattices. The acoustic phonon dispersion is determined by solving the equations of elastodynamics for InAs and GaAs material systems. It is shown that the number of shells is an important control parameter of the phonon dispersion together with the structure dimensions and acoustic impedance mismatchmore » between the superlattice layers. The obtained results suggest that rolled up nano-architectures are promising for thermoelectric applications owing to a possibility of significant reduction of the thermal conductivity without degradation of the electronic transport.« less

Phonon Spectrum Engineering in Rolled-up Micro- and Nano-Architectures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fomin, Vladimir M.; Balandin, Alexander A.

We report on a possibility of efficient engineering of the acoustic phonon energy spectrum in multishell tubular structures produced by a novel high-tech method of self-organization of micro- and nano-architectures. The strain-driven roll-up procedure paved the way for novel classes of metamaterials such as single semiconductor radial micro- and nano-crystals and multi-layer spiral micro- and nano-superlattices. The acoustic phonon dispersion is determined by solving the equations of elastodynamics for InAs and GaAs material systems. It is shown that the number of shells is an important control parameter of the phonon dispersion together with the structure dimensions and acoustic impedance mismatchmore » between the superlattice layers. The obtained results suggest that rolled up nano-architectures are promising for thermoelectric applications owing to a possibility of significant reduction of the thermal conductivity without degradation of the electronic transport.« less

Global Power Play--Competition Winners Light Up the World

ERIC Educational Resources Information Center

Tech Directions, 2012

2012-01-01

This year's "Tech Directions" Inventors Competition asked students to come up with ways to provide electricity to remote villages that traditional electrical utilities have not yet reached. This article presents the results of the judging by inventor/electrical engineer Harry T. Roman. The winners are: (1) First Place--Scott Hulver,…

Bringing in the Tech: Using Outside Expertise to Enhance Technology Learning in Youth Programs

ERIC Educational Resources Information Center

Akiva, Thomas; Povis, Kaleen Tison; Martinez, Ani

2015-01-01

Afterschool continues to be promoted as a complementary setting to school for strengthening science, technology, engineering, and math (STEM) education (for example, Krishnamurthi, Bevan, Rinehart, & Coulon, 2013). This is a reasonable idea: 10.2 million children and youth in the U.S. participate in structured afterschool programs (Afterschool…

Tag Team Tech: What Makes Google Tick.

ERIC Educational Resources Information Center

Janes, Joseph

2002-01-01

The Google search engine is growing in popularity and usually shines in performance ratings. This article summarizes findings from a technical paper written by Google's developers in 1998 before anyone had seen Google. Suggests that a careful reader of the paper will be rewarded with a deeper appreciation of the designers' ideas and…

Towards a more plausible dragon

NASA Astrophysics Data System (ADS)

Efthimiou, Costas

2014-08-01

Wizards, mermaids, dragons and aliens. Walking, running, flying and space travel. A hi-tech elevator, a computer, a propulsion engine and a black hole. What do all of these things have in common? This might seem like a really hard brainteaser but the answer is simple: they all obey the fundamental laws of our universe.

The New Career and Technical School

ERIC Educational Resources Information Center

Reese, Susan

2005-01-01

The 21st century career tech school brings together academics and career skills for a complete education. This article describes the new Romeo Engineering & Technology Center (RETC) in Romeo, Michigan. The 90,288-square-foot facility accommodates up to 720 students in grades 9-12, and sports a building design that evolved through a detailed,…

Creating Hybrid Learning Experiences in Robotics: Implications for Supporting Teaching and Learning

ERIC Educational Resources Information Center

Frerichs, Saundra Wever; Barker, Bradley; Morgan, Kathy; Patent-Nygren, Megan; Rezac, Micaela

2012-01-01

Geospatial and Robotics Technologies for the 21st Century (GEAR-Tech-21), teaches science, technology, engineering and mathematics (STEM) through robotics, global positioning systems (GPS), and geographic information systems (GIS) activities for youth in grades 5-8. Participants use a robotics kit, handheld GPS devices, and GIS technology to…

Computer Based Data Acquisition in the Undergraduate Lab.

ERIC Educational Resources Information Center

Wepfer, William J.; Oehmke, Roger L. T.

1987-01-01

Describes a data acquisition system developed for an undergraduate engineering students' instructional laboratory at Georgia Tech. Special emphasis is placed on the design of an A/D Converter Board used to measure the viscosity and temperature of motor oil. The Simons' BASIC Program Listing for the Commodore 64 microcomputer is appended. (LRW)

Optical Studies of the Flow Start-Up Processes in Four Convergent-Divergent Nozzles

DTIC Science & Technology

1991-03-01

Evaluation Naval Civil Engineering Laboratory Command ATTN: Code L51, J. Tancreto Nuclear Effects Laboratory Port Hueneme, CA 93043-5003 ATTN: STEWS ...Levine Edwards AFB, CA 93523-5000 104 No. of No. of Copies Organization Copies Organization ALITSTL (Tech. Lib) 2 Director ATTN: J. Lamb Los Alamos

Development and operation of a mobile test facility for education

NASA Astrophysics Data System (ADS)

Davis, Christopher T.

The automotive industry saw a large shift towards vehicle electrification after the turn of the century. It became necessary to ensure that new and existing engineers were qualified to design and calibrate these new systems. To ensure this training, Michigan Tech received a grant to develop a curriculum based around vehicle electrification. As part of this agenda, the Michigan Tech Mobile Laboratory was developed to provide hands-on training for professional engineers and technicians in hybrid electric vehicles and vehicle electrification. The Mobile Lab has since then increased the scope of the delivered curriculum to include other automotive areas and even customizable course content to meet specific needs. This thesis outlines the development of the Mobile Laboratory and its powertrain test facilities. The focus of this thesis is to discuss the different hardware and software systems within the lab and test cells. Detailed instructions on the operation and maintenance of each of the systems are discussed. In addition, this thesis outlines the setup and operation of the necessary equipment for several of the experiments for the on and off campus courses and seminars.

The ARGO Project: assessing NA-TECH risks on off-shore oil platforms

NASA Astrophysics Data System (ADS)

Capuano, Paolo; Basco, Anna; Di Ruocco, Angela; Esposito, Simona; Fusco, Giannetta; Garcia-Aristizabal, Alexander; Mercogliano, Paola; Salzano, Ernesto; Solaro, Giuseppe; Teofilo, Gianvito; Scandone, Paolo; Gasparini, Paolo

2017-04-01

ARGO (Analysis of natural and anthropogenic risks on off-shore oil platforms) is a 2 years project, funded by the DGS-UNMIG (Directorate General for Safety of Mining and Energy Activities - National Mining Office for Hydrocarbons and Georesources) of Italian Ministry of Economic Development. The project, coordinated by AMRA (Center for the Analysis and Monitoring of Environmental Risk), aims at providing technical support for the analysis of natural and anthropogenic risks on offshore oil platforms. In order to achieve this challenging objective, ARGO brings together climate experts, risk management experts, seismologists, geologists, chemical engineers, earth and coastal observation experts. ARGO has developed methodologies for the probabilistic analysis of industrial accidents triggered by natural events (NA-TECH) on offshore oil platforms in the Italian seas, including extreme events related to climate changes. Furthermore the environmental effect of offshore activities has been investigated, including: changes on seismicity and on the evolution of coastal areas close to offshore platforms. Then a probabilistic multi-risk framework has been developed for the analysis of NA-TECH events on offshore installations for hydrocarbon extraction.

Hartford Hospital surgeons share publicity with robot 'assistants.'.

PubMed

Botvin, Judith D

2004-01-01

Hartford Hospital, Hartford, Conn. finds some patients gravitate to Boston or New York City for high-tech procedures. Being the first Connecticut hospital with the daVinci Robotic Surgery System, it developed an advertising campaign emphasizing high-tech surgery with the human touch. Hartford also broadcast a robotic prostatectomy on its popular live webcast series.

High Tech and the Upward Mobility of Non-Technical People.

ERIC Educational Resources Information Center

Kammire, Linda L.

The social and psychological effects of rapid technological advancement in the computer industry is the subject of this paper, which focuses on the concerns of people with non-technical backgrounds. It describes the career series, High Tech for Non-Technical People, created by the Georgia State University Career Development Center. The three…

Human Resource Blueprints in Irish High-Tech Start-Up Firms

ERIC Educational Resources Information Center

Keating, Mary A.; Olivares, Mariabrisa

2006-01-01

Focusing on Irish high-tech start-ups, this paper reports on the results of an empirical study of organization building by entrepreneurial firms, specifically in relation to human resource practices. The research findings are benchmarked with findings from SPEC, the Stanford Project of Emerging Companies (Baron and Hannan, 2002). Human resources…

Planning and Designing Today's Career Tech Facility

ERIC Educational Resources Information Center

Seaman, James

2010-01-01

During the past 20 years, career and technical education (CTE) has gone through significant changes. CTE has evolved in response to the changes technology has had on the job market. Preparing students for high-tech, high-skill job opportunities is the new focus. The facilities that house these programs, however, have not kept pace with these…

Spaces of Innovation: Experiences from Two Small High-Tech Firms

ERIC Educational Resources Information Center

Heiskanen, Tuula; Heiskanen, Hannu

2011-01-01

Purpose: By comparing two small high-tech firms specialising in medical technology this article seeks to answer the following questions: What are the key characteristics of innovation processes in the case firms? How do the mutual relationships between mental, social and physical spaces explain the different pathways in the innovation processes in…

Women and Minorities in High-Tech Careers. ERIC Digest No. 226.

ERIC Educational Resources Information Center

Brown, Bettina Lankard

Women and minorities are underrepresented in technology-related careers for many reasons, including lack of access, level of math and science achievement, and emotional and social attitudes about computer capabilities. Schools and teachers can use the following strategies to attract women and minorities to high-tech careers and prepare them for…

West Europe Report, Science and Technology

DTIC Science & Technology

1986-03-17

30 Nov 85) 51 High Tech Parks To Be Built Near Madrid, Barcelona TIEMPO, 27 Jan 86; LA VANGUARDIA , 23 Jan 86) 54 Fast-Growing Center, by Manuel...of the most important high tech parks in the country. And all thanks to the influence of "Mr Chip." Barcelona Park Barcelona LA VANGUARDIA in

Access to high-tech health care. Ethics.

PubMed

Merrill, J M

1991-03-15

Access to health care has always been limited by personal and social economics. Poverty remains one element that correlates with poor prognosis in all varieties of cancer. Prior to becoming standard therapy, elements of high-tech health care are often widely available as research protocols, participation in which is generally available without considerations of insurance coverage or personal wealth. Any person may still volunteer participation in research protocols and thereby partake in high-tech advances even before these become standard therapy. However, recent developments in the conduct of research now may limit participation. Medicare and third party insurance payers proscribe payment for research project care and always have. Recently, more than ever before, reimbursements to physicians and health care institutions have been more closely scrutinized to reject all payment in research settings. In situations in which cost and availability of the new technology, whether machine or drug, limit participation, research entrepreneurs have made research participation available to only those who can pay for it. These and similar developments threaten to limit access to high-tech health care and to actually impede cancer research.

High-Tech Versus High-Touch: Components of Hospital Costs Vary Widely.

PubMed

Song, Paula H; Reiter, Kristin L; Yi Xu, Wendy

The recent release by the Centers for Medicare & Medicaid Services of hospital charge and payment data to the public has renewed a national dialogue on hospital costs and prices. However, to better understand the driving force of hospital pricing and to develop strategies for controlling expenditures, it is important to understand the underlying costs of providing hospital services. We use Medicare Provider and Analysis Review inpatient claims data and Medicare cost report data for fiscal years 2008 and 2012 to examine variations in the contribution of "high-tech" resources (i.e., technology/medical device-intensive resources) versus "high-touch" resources (i.e., labor-intensive resources) to the total costs of providing two common services, as well as assess how these costs have changed over time. We found that high-tech inputs accounted for a greater proportion of the total costs of surgical service, whereas medical service costs were primarily attributable to high-touch inputs. Although the total costs of services did not change significantly over time, the distribution of high-tech, high-touch, and other costs for each service varied considerably across hospitals. Understanding resource inputs and the varying contribution of these inputs by clinical condition is an important first step in developing effective cost control strategies.

Active Control of Inlet Noise on the JT15D Turbofan Engine

NASA Technical Reports Server (NTRS)

Smith, Jerome P.; Hutcheson, Florence V.; Burdisso, Ricardo A.; Fuller, Chris R.

1999-01-01

This report presents the key results obtained by the Vibration and Acoustics Laboratories at Virginia Tech over the year from November 1997 to December 1998 on the Active Noise Control of Turbofan Engines research project funded by NASA Langley Research Center. The concept of implementing active noise control techniques with fuselage-mounted error sensors is investigated both analytically and experimentally. The analytical part of the project involves the continued development of an advanced modeling technique to provide prediction and design guidelines for application of active noise control techniques to large, realistic high bypass engines of the type on which active control methods are expected to be applied. Results from the advanced analytical model are presented that show the effectiveness of the control strategies, and the analytical results presented for fuselage error sensors show good agreement with the experimentally observed results and provide additional insight into the control phenomena. Additional analytical results are presented for active noise control used in conjunction with a wavenumber sensing technique. The experimental work is carried out on a running JT15D turbofan jet engine in a test stand at Virginia Tech. The control strategy used in these tests was the feedforward Filtered-X LMS algorithm. The control inputs were supplied by single and multiple circumferential arrays of acoustic sources equipped with neodymium iron cobalt magnets mounted upstream of the fan. The reference signal was obtained from an inlet mounted eddy current probe. The error signals were obtained from a number of pressure transducers flush-mounted in a simulated fuselage section mounted in the engine test cell. The active control methods are investigated when implemented with the control sources embedded within the acoustically absorptive material on a passively-lined inlet. The experimental results show that the combination of active control techniques with fuselage-mounted error sensors and passive control techniques is an effective means of reducing radiated noise from turbofan engines. Strategic selection of the location of the error transducers is shown to be effective for reducing the radiation towards particular directions in the farfield. An analytical model is used to predict the behavior of the control system and to guide the experimental design configurations, and the analytical results presented show good agreement with the experimentally observed results.

Exploring cognitive support use and preference by college students with TBI: A mixed-methods study.

PubMed

Brown, Jessica; Hux, Karen; Hey, Morgan; Murphy, Madeline

2017-01-01

Many college students with TBI rely on external strategies and supports to compensate for persistent memory, organization, and planning deficits that interfere with recalling and executing daily tasks. Practitioners know little, however, about the supports students with TBI choose for this purpose, the reasoning behind their choice, or preferred features of selected supports. The purpose of this study was to explore these issues. We collected and analyzed quantitative and qualitative data from eight college students with TBI for completion of a concurrent triangulation mixed-methods design. Data analysis included evaluation and triangulation of participant demographic information, survey responses about persistent post-injury symptoms, transcripts from semi-structured interviews about cognitive support devices and strategies, and ranking results about specific compensatory tools. Results suggest that college students with TBI prefer high-tech external supports-sometimes with the addition of low-tech, paper supports-to assist them in managing daily tasks. This preference related to features of portability, accessibility, and automatic reminders. An electronic calendar was the most-preferred high-tech support, and a paper checklist was the most-preferred low-tech support. Rehabilitation professionals should consider implementing high-tech supports with preferred characteristics during treatment given the preferences of students with TBI and the consequent likelihood of their continued long-term use following reintegration to community settings.

Patient Autonomy in a High-Tech Care Context - A Theoretical Framework.

PubMed

Lindberg, Catharina; Fagerström, Cecilia; Willman, Ania

2018-06-12

To synthesise and interpret previous findings with the aim of developing a theoretical framework for patient autonomy in a high-tech care context. Putting the somewhat abstract concept of patient autonomy into practice can prove difficult since when it is highlighted in healthcare literature the patient perspective is often invisible. Autonomy presumes that a person has experience, education, self-discipline and decision-making capacity. Reference to autonomy in relation to patients in high-tech care environments could therefore be considered paradoxical, as in most cases these persons are vulnerable, with impaired physical and/or metacognitive capacity, thus making extended knowledge of patient autonomy for these persons even more important. Theory development. The basic approaches in theory development by Walker and Avant were used to create a theoretical framework through an amalgamation of the results from three qualitative studies conducted previously by the same research group. A theoretical framework - the control-partnership-transition framework - was delineated disclosing different parts co-creating the prerequisites for patient autonomy in high-tech care environments. Assumptions and propositional statements that guide theory development were also outlined, as were guiding principles for use in day-to-day nursing care. Four strategies used by patients were revealed: the strategy of control, the strategy of partnership, the strategy of trust, and the strategy of transition. An extended knowledge base, founded on theoretical reasoning about patient autonomy, could facilitate nursing care that would allow people to remain/become autonomous in the role of patient in high-tech care environments. The control-partnership-transition framework would be of help in supporting and defending patient autonomy when caring for individual patients, as it provides an understanding of the strategies employed by patients to achieve autonomy in high-tech care contexts. The guiding principles for patient autonomy presented could be used in nursing guidelines. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Subsonic Ultra Green Aircraft Research. Phase II - Volume I; Truss Braced Wing Design Exploration

NASA Technical Reports Server (NTRS)

Bradley, Marty K.; Droney, Christopher K.; Allen, Timothy J.

2015-01-01

This report summarizes the Truss Braced Wing (TBW) work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, consisting of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, Georgia Tech, Virginia Tech, NextGen Aeronautics, and Microcraft. A multi-disciplinary optimization (MDO) environment defined the geometry that was further refined for the updated SUGAR High TBW configuration. Airfoil shapes were tested in the NASA TCT facility, and an aeroelastic model was tested in the NASA TDT facility. Flutter suppression was successfully demonstrated using control laws derived from test system ID data and analysis models. Aeroelastic impacts for the TBW design are manageable and smaller than assumed in Phase I. Flutter analysis of TBW designs need to include pre-load and large displacement non-linear effects to obtain a reasonable match to test data. With the updated performance and sizing, fuel burn and energy use is reduced by 54% compared to the SUGAR Free current technology Baseline (Goal 60%). Use of the unducted fan version of the engine reduces fuel burn and energy by 56% compared to the Baseline. Technology development roadmaps were updated, and an airport compatibility analysis established feasibility of a folding wing aircraft at existing airports.

Universities, the US High Tech Advantage, and the Process of Globalization. Research & Occasional Paper Series: CSHE.8.2008

ERIC Educational Resources Information Center

Douglass, John Aubrey

2008-01-01

Research universities throughout the world are part of a larger effort by nation-states to bolster science and technological innovation and compete economically. The US remains highly competitive as a source of High Tech (HT) innovation because of a number of market positions, many the result of long term investments in institutions such as…

Biomedical Engineering Bionanosystems Research at Louisiana Tech University

DOE Office of Scientific and Technical Information (OSTI.GOV)

Palmer, James; Lvov, Yuri; Hegab, Hisham

2010-03-25

The nature of this project is to equip and support research in nanoengineered systems for biomedical, bioenvironmental, and bioenergy applications. Funds provided by the Department of Energy (DoE) under this Congressional Directive were used to support two ongoing research projects at Louisiana Tech University in biomedical, bioenvironmental, and bioenergy applications. Two major projects (Enzyme Immobilization for Large Scale Reactors to Reduce Cellulosic Ethanol Costs, and Nanocatalysts for Coal and Biomass Conversion to Diesel Fuel) and to fund three to five additional seed projects were funded using the project budget. The project funds also allowed the purchase and repair of sophisticatedmore » research equipment that will support continued research in these areas for many years to come. Project funds also supported faculty, graduate students, and undergraduate students, contributing to the development of a technically sophisticated work force in the region and the State. Descriptions of the technical accomplishments for each funded project are provided. Biofuels are an important part of the solution for sustainable transportation fuel and energy production for the future. Unfortunately, the country's appetite for fuel cannot be satisfied with traditional sugar crops such as sugar cane or corn. Emerging technologies are allowing cellulosic biomass (wood, grass, stalks, etc.) to also be converted into ethanol. Cellulosic ethanol does not compete with food production and it has the potential to decrease greenhouse gas (GHG) emissions by 86% versus current fossil fuels (current techniques for corn ethanol only reduce greenhouse gases by 19%). Because of these advantages, the federal government has made cellulosic ethanol a high priority. The Energy Independence and Security Act of 2007 (EISA) requires a minimum production of at least 16 billion gallons of cellulosic ethanol by 2022. Indeed, the Obama administration has signaled an ambitious commitment of achieving 2 billion gallons of cellulosic ethanol by 2013. Louisiana is well positioned to become a national contributor in cellulosic ethanol, with an excellent growing season, a strong pulp/paper industry, and one of the nation's first cellulosic ethanol demonstration plants. Dr. Palmer in Chemical Engineering at Louisiana Tech University is collaborating with Drs. Lvov and Snow in Chemistry and Dr. Hegab in Mechanical Engineering to capitalize on these advantages by applying nanotechnology to improve the cellulosic ethanol processes. In many of these processes, expensive enzymes are used to convert the cellulose to sugars. The nanotechnology processes developed at Louisiana Tech University can immobilize these enzymes and therefore significantly reduce the overall costs of the process. Estimates of savings range from approximately $32 million at each cellulosic ethanol plant, to $7.5 billion total if the 16 billion gallons of cellulosic ethanol is achieved. This process has the advantage of being easy to apply in a large-scale commercial environment and can immobilize a wide variety or mixture of enzymes for production. Two primary objectives with any immobilization technique are to demonstrate reusability and catalytic activity (both reuse of the immobilized enzyme and reuse of the polymer substrate). The scale-up of the layering-by-layering process has been a focus this past year as some interesting challenges in the surface chemistry have become evident. Catalytic activity of cellulase is highly dependent upon how the feed material is pretreated to enhance digestion. Therefore, efforts this year have been performed this year to characterize our process on a few of the more prevalent pretreatment methods.« less

Tissue engineering: confronting the transplantation crisis.

PubMed

Nerem, R M

2000-01-01

Tissue engineering is the development of biological substitutes and/or the fostering of tissue regeneration/remodelling. It is emerging as a technology which has the potential to confront the crisis in transplantation caused by the shortage of donor tissues and organs. With the development of this technology, ther is emerging a new industry which is at the interface of biotechnology and the traditional medical implant field. For this technology and the associated industry to realize their full potential, there are core, enabling technologies that need to be developed. This is the focus of the Georgia Tech/Emory Center for the Engineering of Living Tissues, newly established in the United States, with an Engineering Research Center Award from the National Science Foundation. With the development of these core technologies, tissue engineering will evolve from an art form to a technology based on science and engineering.

Project DATA-TECH. 1990-91 Final Evaluation Profile. OREA Report.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Office of Research, Evaluation, and Assessment.

An evaluation was done of New York City Public Schools' Project DATA-TECH, which served limited English proficient high school students interested in computer-aided drafting (CAD) and cosmetology programs. The program served 190 students at Sara J. Hale High School in Brooklyn, of whom 89.5 percent were eligible for the Free Lunch Program and most…

Low-Tech Laser Learning: Can Less Be More?

ERIC Educational Resources Information Center

Tatsuki, Donna Hurst

1997-01-01

Examines an alternative to high-powered, high-tech use of laser disk technology in teaching English as a Second Language. Points out that there has not been a rush to install this technology because of cost, scarcity of courseware, incompatibility of the various delivery systems and the time investment/technical expertise required of the teacher.…

Organizational Attributes and Learning beyond the Boundaries: Comparative Case Studies of Two High-Tech Firms

ERIC Educational Resources Information Center

Zhong, Jing; Wu, Sizong; Li, Jun

2008-01-01

This study compares two high-tech firms in terms of their differences in organizational characteristics and learning activities beyond the boundaries. It finds that the larger company continuously develops new technology to achieve long-term survival through a balance between exploration and exploitation while the smaller enterprise grows quickly…

Defense.gov Special Report: Travels With Lynn - April 2011

Science.gov Websites

Department of Defense Submit Search April 2011 News Photos Top Stories Lynn Opens New High-tech Countertrafficking Center NAVAL AIR STATION KEY WEST, Fla., April 19, 2011 - A new, high-tech command center at Naval & Security Link Disclaimer Recovery Act FOIA USA.gov No FEAR Act Plain Writing Act of 2010

Neuroscientific Investigator of High Mathematical Ability: An Interview with Michael W. O'Boyle

ERIC Educational Resources Information Center

Kalbfleisch, M. Layne

2008-01-01

This article presents an interview with Michael W. O'Boyle, a neuroscientific investigator of high mathematical ability. O'Boyle is a professor in the Department of Human Development and Family Studies, Texas Tech University, and Adjunct Professor of Pharmacology and Neuroscience, School of Medicine, Texas Tech University Health Sciences Center.…

High-Tech Betrayal: Working and Organizing on the Shop Floor.

ERIC Educational Resources Information Center

Devinatz, Victor G.

This book, which is based on a 7-month ethnographic study of working conditions and employment practices at a biomedical electronics factory, examines the impact that high tech has had on the relationship between management and workers in the manufacturing industry. The following are among the topics discussed in the book's 10 chapters: (1) the…

Job stress models, depressive disorders and work performance of engineers in microelectronics industry.

PubMed

Chen, Sung-Wei; Wang, Po-Chuan; Hsin, Ping-Lung; Oates, Anthony; Sun, I-Wen; Liu, Shen-Ing

2011-01-01

Microelectronic engineers are considered valuable human capital contributing significantly toward economic development, but they may encounter stressful work conditions in the context of a globalized industry. The study aims at identifying risk factors of depressive disorders primarily based on job stress models, the Demand-Control-Support and Effort-Reward Imbalance models, and at evaluating whether depressive disorders impair work performance in microelectronics engineers in Taiwan. The case-control study was conducted among 678 microelectronics engineers, 452 controls and 226 cases with depressive disorders which were defined by a score 17 or more on the Beck Depression Inventory and a psychiatrist's diagnosis. The self-administered questionnaires included the Job Content Questionnaire, Effort-Reward Imbalance Questionnaire, demography, psychosocial factors, health behaviors and work performance. Hierarchical logistic regression was applied to identify risk factors of depressive disorders. Multivariate linear regressions were used to determine factors affecting work performance. By hierarchical logistic regression, risk factors of depressive disorders are high demands, low work social support, high effort/reward ratio and low frequency of physical exercise. Combining the two job stress models may have better predictive power for depressive disorders than adopting either model alone. Three multivariate linear regressions provide similar results indicating that depressive disorders are associated with impaired work performance in terms of absence, role limitation and social functioning limitation. The results may provide insight into the applicability of job stress models in a globalized high-tech industry considerably focused in non-Western countries, and the design of workplace preventive strategies for depressive disorders in Asian electronics engineering population.

Keeping It Real: A Toledo Public School Prepares Students for College and Career

ERIC Educational Resources Information Center

Dubin, Jennifer

2014-01-01

In this article, author Jennifer Dubin offers a look into the innovations taking place in the Toledo Technology Academy (TTA), a career-tech school within the public school system in Toledo, Ohio. TTA teaches students in grades 7 through 12 using a science, technology, engineering, and math (STEM) curriculum, in addition to the traditional…

Playbook on Best Practices: Gender Equity in Tech

ERIC Educational Resources Information Center

Buse, Kathleen; Evans, Nicole; George, Emma; Ford, Jeremy; Anderson, Jessica

2017-01-01

While girls are studying and excelling in science and math more than ever before, this achievement has not been matched with a similar rise in the representation of women in these careers. Today, women make up just 12 percent of the engineering workforce and 26 percent of the computing workforce. Employers play a critical role in improving the…

One Mission-Centered, Market-Smart Globalization Response: A Case Study of the Georgia Tech-Emory University Biomedical Engineering Curricular Joint Venture

ERIC Educational Resources Information Center

Burriss, Annie Hunt

2010-01-01

One innovative, higher-education response to globalization and changing fiscal realities is the curricular joint venture (CJV), a formal collaboration between academic institutions that leverages missions through new joint degrees and research not previously offered by collaborating institutions (Eckel, 2003). In 1997, a pioneering biomedical…

PADF RF Localization Criteria for Multi-Model Scattering Environments

DTIC Science & Technology

2011-04-01

Raul Ordonez b, Atindra Mitra c aDepartment of Electrical Engineering, Louisiana Tech University, Ruston, LA 71272 bDepartment of Electrical and...21] April Johnson, Cara Rupp, Brad Wolf, Lang Hong, Atindra Mitra, “Collision-Avoidance Radar for Bicyclist and Runners,” 2010 IEEE National Aerospace and Electronics Conference, 14-16 July 2010, Dayton, Ohio

2010-2011 Inventors Competition--Winners of the "Gimme Shelter" Competition

ERIC Educational Resources Information Center

Tech Directions, 2011

2011-01-01

The number of entries to this year's "Tech Directions" Inventors Competition exceeded even the record set by the 2009-2010 contest--and gave engineer/inventor Harry T. Roman quite a judging challenge. This year's challenge called on students to propose designs for inexpensive, portable shelters that could be used by people made homeless by natural…

Trash + Creativity = Problem Solved: Award Winners Give Plastic Bottles Second Life

ERIC Educational Resources Information Center

Tech Directions, 2007

2007-01-01

Judge Harry T. Roman, an electrical engineer and inventor, has selected the best of the crop in the 2006/2007 Tech Directions Inventors Award Competition. The challenge this year called on students to slow the filling of landfills by devising uses for discarded plastic water, juice, soda, and sports-drink bottles. Judge Roman noted "many common…

A Nuclear Tech Course = Nuclear Technology in War and Peace: A Study of Issues and Choices.

ERIC Educational Resources Information Center

Shanebrook, J. Richard

A nuclear technology college course for engineering students is outlined and described. The course begins with an historical account of the scientific discoveries leading up to the uranium experiments of Hahn and Strassman in Germany and the subsequent explanation of nuclear fission by Meitner and Frisch. The technological achievements of the…

From Fire Starters to Napkin Dispensers: Milk Carton Challenge Sparks Great Creativity

ERIC Educational Resources Information Center

Tech Directions, 2009

2009-01-01

The offices of "Tech Directions" experienced a deluge of entries in response to the 2008-2009 Inventors Award Competition challenge--and judge Harry T. Roman (an inventor and engineer himself) has heroically waded through them all and carefully selected the very best. This year's popular challenge called on students to devise new uses for…

ADVANCED MANUFACTURING TEAM

NASA Image and Video Library

2016-03-17

JOHNNIE CLARK, BRIAN WEST, AND ZACK JONES OF MSFC’S ADVANCED MANUFACTURING TEAM, WITH MSFC’S XLINE SELECTIVE LASER MELTING SYSTEM. CURRENTLY ONE OF THE LARGEST METAL 3D PRINTERS, THE XLINE AT MARSHALL IS BEING USED TO DEVELOP AND CERTIFY NICKEL ALLOY 718 MATERIAL PROPERTIES AND LARGE MANUFACTURING TECH DEMOS FOR THE RS25 ENGINE AND THE COMMERCIAL CREWED VEHICLE PROJECTS.

Bagging system, soil stabilization mat, and tent frame for a lunar base

NASA Technical Reports Server (NTRS)

1990-01-01

Georgia Tech's School of Textile and Fiber Engineering and School of Mechanical Engineering participated in four cooperative design efforts this year. Each of two interdisciplinary teams designed a system consisting of a lunar regolith bag and an apparatus for filling this bag. The third group designed a mat for stabilization of lunar soil during takeoff and landing, and a method for packaging and deploying this mat. Finally, the fourth group designed a sunlight diffusing tent to be used as a lunar worksite. Summaries of these projects are given.

Mission and spacecraft support functions of the Materials Engineering Branch: A space oriented technology resource

NASA Technical Reports Server (NTRS)

Fisher, A.; Staugaitis, C. L.

1974-01-01

The capabilities of the Materials Engineering Branch (MEB) of the Goddard Space Flight Center, Greenbelt, Maryland, are surveyed. The specific functions of spacecraft materials review, materials processing and information dissemination, and laboratory support, are outlined in the Activity Report. Further detail is provided by case histories of laboratory satellite support and equipment. Project support statistics are shown, and complete listings of MEB publications, patents, and tech briefs are included. MEB staff, and their respective discipline areas and spacecraft liaison associations, are listed.

Bagging system, soil stabilization mat, and tent frame for a lunar base

NASA Astrophysics Data System (ADS)

1990-11-01

Georgia Tech's School of Textile and Fiber Engineering and School of Mechanical Engineering participated in four cooperative design efforts this year. Each of two interdisciplinary teams designed a system consisting of a lunar regolith bag and an apparatus for filling this bag. The third group designed a mat for stabilization of lunar soil during takeoff and landing, and a method for packaging and deploying this mat. Finally, the fourth group designed a sunlight diffusing tent to be used as a lunar worksite. Summaries of these projects are given.

Technology Cost and Schedule Estimation (TCASE) Final Report

NASA Technical Reports Server (NTRS)

Wallace, Jon; Schaffer, Mark

2015-01-01

During the 2014-2015 project year, the focus of the TCASE project has shifted from collection of historical data from many sources to securing a data pipeline between TCASE and NASA's widely used TechPort system. TCASE v1.0 implements a data import solution that was achievable within the project scope, while still providing the basis for a long-term ability to keep TCASE in sync with TechPort. Conclusion: TCASE data quantity is adequate and the established data pipeline will enable future growth. Data quality is now highly dependent the quality of data in TechPort. Recommendation: Technology development organizations within NASA should continue to work closely with project/program data tracking and archiving efforts (e.g. TechPort) to ensure that the right data is being captured at the appropriate quality level. TCASE would greatly benefit, for example, if project cost/budget information was included in TechPort in the future.

[New risks of addiction for new populations: the example of hackers].

PubMed

Tisserand, I N

2000-10-01

Our purpose was to examine recent social and technical habits related to high-tech environments. Our goal was to show that the prevention of risk behaviors due to training in data processing, requires an interdisciplinary approach where medical anthropology could benefit from and exchange of complementary information sources (particularly from psychiatrics and psychoanalysis). We used this approach to search for solutions regarding new kinds of addiction. When identifying pathological conditions and proposing appropriate care, these solutions must take into consideration the progressive loss of human nature in data processing environments and the very important and highly sophisticated relationship established between the human being and the computer. We looked at the hacker population as a modern tribe and marginal group. Our analysis led to a better understanding of this kind of artificial culture, sometimes called a "high-tech" or "cyber" culture. The hacker population is integrating new rituals, languages and special rhythms which induce addictions. We show how high-tech environments operating in e-time and e-life induce addictions. This work illustrates a classical anthropological approach to the question (ethnological fields, interviews, literature analysis). The major challenge is to explain how high-tech environments present high risks for dependency in the hacker population and other, unwarned, computer (ab)users.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Muhleman, T.; Dempsey, P.

Although reduced activity has left its mark on engineering budgets and many projects have been delayed, industry remains committed to research and development. This year's emphasis is offshore where new-generation semi-submersibles are under construction for Arctic waters and where equipment technology is reaching maturity. Improved tubulars such as new process-forged drill pipe, special alloy, corrosion-resistant pipe and new tool joint designs are finding eager markets both on and offshore. And back in the office, microcomputers, a curiosity a few years ago, are making significant advances in improving drilling and production operations. Specific examples of this new technology include: Two high-tech,more » high-risk floaters Hard rock sidewall coring tool New torque-resistant tool joint Two improved riser connection systems Breakthrough in drill pipe manufacturing Power-packed portable drilling computer.« less

KSC-2012-2769

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building, Rudy Werlink gives students a first-hand look at the workings of the sound testing area of cryogenics lab. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

KSC-2012-2768

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Inside the Operations and Checkout Building, Rudy Werlink gives students a first-hand look at the workings of the sound testing area of cryogenics lab. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

KSC-2012-2762

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Dr. Ray Wheeler explains a plant growth chamber to students in the Life Support and Habitation Systems Lab at the Space Life Sciences Lab facility. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

KSC-2012-2764

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Dr. Ray Wheeler explains a system for growing salad crops in space to students in the Life Support and Habitation Systems Lab at the Space Life Sciences Lab facility. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

KSC-2012-2761

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Dr. Phil Metzger demonstrates an experiment to study the physics of granular materials to students in the Granular Physics and Regolith Operations Lab at the Space Life Sciences Lab facility. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

KSC-2012-2763

NASA Image and Video Library

2012-05-14

CAPE CANAVERAL, Fla. – Dr. Ray Wheeler explains a system for growing salad crops in space to students in the Life Support and Habitation Systems Lab at the Space Life Sciences Lab facility. The 26 honor students in chemistry and biology and their teachers got a chance to visit a number of high-tech labs at Kennedy Space Center as part of an effort to encourage students in the areas of science, technology, engineering and math. The tenth and eleventh grade students from Terry Parker High School in Jacksonville, Fla., visited a number of vastly different labs during their one-day tour. The group's visit to Kennedy was hosted by the Education Office as part of a nationwide effort by the National Lab Network to help introduce the nation's students to science careers. Photo credit: NASA/Jim Grossmann

Capturing the real value in high-tech acquisitions.

PubMed

Chaudhuri, S; Tabrizi, B

1999-01-01

Eager to stay ahead of fast-changing markets, more and more high-tech companies are going outside for competitive advantage. Last year in the United States alone, there were 5,000 high-tech acquisitions, but many of them yielded disappointing results. The reason, the authors contend, is that most managers have a shortsighted view of strategic acquisitions--they focus on the specific products or market share. That focus might make sense in some industries, where those assets can confer substantial advantages, but in high tech, full-fledged technological capabilities--tied to skilled people--are the key to long-term success. Instead of simply following the "buzz," successful acquires systematically assess their own capability needs. They create product road maps to identify holes in their product line. While the business group determines if it can do the work in-house, the business development office scouts for opportunities to buy it. Once business development locates a candidate, it conducts an expanded due diligence, which goes beyond strategic, financial, and legal checks. Successful acquires are focused on long-term capabilities, so they make sure that the target's products reflect a real expertise. They also look to see if key people would be comfortable in the new environment and if they have incentives to stay on board. The final stage of a successful acquisition focuses on retaining the new people--making sure their transition goes smoothly and their energies stay focused. Acquisitions can cause great uncertainty, and skilled people can always go elsewhere. In short, the authors argue, high-tech acquisitions need a new orientation around people, not products.

Applications of Ni3Al Based Intermetallic Alloys—Current Stage and Potential Perceptivities

PubMed Central

Jozwik, Pawel; Polkowski, Wojciech; Bojar, Zbigniew

2015-01-01

The paper presents an overview of current and prospective applications of Ni3Al based intermetallic alloys—modern engineering materials with special properties that are potentially useful for both structural and functional purposes. The bulk components manufactured from these materials are intended mainly for forging dies, furnace assembly, turbocharger components, valves, and piston head of internal combustion engines. The Ni3Al based alloys produced by a directional solidification are also considered as a material for the fabrication of jet engine turbine blades. Moreover, development of composite materials with Ni3Al based alloys as a matrix hardened by, e.g., TiC, ZrO2, WC, SiC and graphene, is also reported. Due to special physical and chemical properties; it is expected that these materials in the form of thin foils and strips should make a significant contribution to the production of high tech devices, e.g., Micro Electro-Mechanical Systems (MEMS) or Microtechnology-based Energy and Chemical Systems (MECS); as well as heat exchangers; microreactors; micro-actuators; components of combustion chambers and gasket of rocket and jet engines as well components of high specific strength systems. Additionally, their catalytic properties may find an application in catalytic converters, air purification systems from chemical and biological toxic agents or in a hydrogen “production” by a decomposition of hydrocarbons.

X-43C Flight Demonstrator Project Overview

NASA Technical Reports Server (NTRS)

Moses, Paul L.

2003-01-01

The X-43C Flight Demonstrator Project is a joint NASA-USAF hypersonic propulsion technology flight demonstration project that will expand the hypersonic flight envelope for air-breathing engines. The Project will demonstrate sustained accelerating flight through three flights of expendable X-43C Demonstrator Vehicles (DVs). The approximately 16-foot long X-43C DV will be boosted to the starting test conditions, separate from the booster, and accelerate from Mach 5 to Mach 7 under its own power and autonomous control. The DVs will be powered by a liquid hydrocarbon-fueled, fuel-cooled, dual-mode, airframe integrated scramjet engine system developed under the USAF HyTech Program. The Project is managed by NASA Langley Research Center as part of NASA's Next Generation Launch Technology Program. Flight tests will be conducted by NASA Dryden Flight Research Center off the coast of California over water in the Pacific Test Range. The NASA/USAF/industry project is a natural extension of the Hyper-X Program (X-43A), which will demonstrate short duration (approximately 10 seconds) gaseous hydrogen-fueled scramjet powered flight at Mach 7 and Mach 10 using a heavy-weight, largely heat sink construction, experimental engine. The X-43C Project will demonstrate sustained accelerating flight from Mach 5 to Mach 7 (approximately 4 minutes) using a flight-weight, fuel-cooled, scramjet engine powered by much denser liquid hydrocarbon fuel. The X-43C DV design flows from integrating USAF HyTech developed engine technologies with a NASA Air-Breathing Launch Vehicle accelerator-class configuration and Hyper-X heritage vehicle systems designs. This paper describes the X-43C Project and provides the background for NASA's current hypersonic flight demonstration efforts.

A Study of the Influence of Learning Organization on Organizational Creativity and Organizational Communication in High Tech Technology

ERIC Educational Resources Information Center

Duan, Qingying

2017-01-01

The value of a high-tech industry no longer lies in the number of plants, equipment, and products but the intellectual property, customer confidence, capability of collaborating with business partners, telecommunication infrastructure, and the creativity potential and skills of its employees. This study is motivated by investigating the way of…

How Is Corporate Social Responsibility Addressed by Biotech Firms? a Case Study Analysis

ERIC Educational Resources Information Center

Pérez-Bustamante, Guillermo

2013-01-01

This paper explores corporate social responsibility (CSR) in the biotech high-tech sector as a way to achieve competitive advantages. After presenting the importance of science for high-tech firms, the paper focuses on the social and economic role of CSR. Next, the primary reasons for firms' engagement in CSR activities are presented, followed by…

Adolescent's Perceptions of Deviance When Using Technology: The Approaching Post-Typographic Culture

ERIC Educational Resources Information Center

Daniel, Annie J.

2005-01-01

Background: Deviant behavior on the computer and the Internet is rising as technology use increases (Hollinger, 1996b ; Power, 2000; Vatis, 2000). Recently, there has been an increase in the number of high tech crimes by adolescents. According to the U.S. Department of Justice (2005), teens have gone high tech with old fashion bullying, stalking…

Are You What You Eat? An inside Look at High-Tech Food

ERIC Educational Resources Information Center

Miller, Roxanne Greitz

2007-01-01

If we abide by the familiar saying "you are what you eat," it is understandable that people may be concerned with the incredible advances in food science technology and their possible impacts on human health. For example, in recent years high-tech scientific processes such as genetic modification, irradiation, and cloning have all been used to…

Coupling Immersive Experiences with the Use of Mission Data to Encourage Students' Interest in Science, Technology, Engineering, and Math: Examples from the Mars Exploration Program

NASA Astrophysics Data System (ADS)

Klug, S. L.; Valderrama, P.; Viotti, M. A.; Watt, K.; Wurman, G.

2004-12-01

The Mars Exploration Program, in partnership with the Arizona State University Mars Education Program has created and successfully tested innovative pathways and programs that introduce, develop, and reinforce science, technology, engineering, and mathematics - STEM subjects into pre-college curriculum. With launches scheduled every 26 months, Mars has the unique opportunity and ability to have a long-term, systemic influence on science education. Also, because of the high level of interest in Mars, as exemplified by the10 billion Internet hits during the Mars Exploration Rover mission, it is a great vehicle for the infusion of current science into today's classrooms. These Mars education programs have linked current mission science and engineering with the National Education Standards, integrating them in a teacher-friendly and student-friendly format. These linkages are especially synergistic when combined with long-term partnerships between educators, Mars scientists and engineers, as they exemplify real-world collaborations and teamwork. To accommodate many different audience needs, an array of programs and a variety of approaches to these programs have been developed. High tech, low tech and no tech options can be implemented to help insure that as many students can be accommodated and impacted by these programs as possible. These programs are scaled to match the National Education Standards in the grade levels in which students need to become proficient in these subjects. The Mars Student Imaging Project - MSIP allows teams of students from the fifth grade through community college to be immersed in a hands-on program and experience the scientific process firsthand by using the Thermal Emission Imaging System - THEMIS camera to target their own image of Mars using an educational version of the real flight software used to target THEMIS images. The student teams then analyze their image and report their findings to the MSIP website. This project has been in existence for over two years and has been used by teachers and students from across the US. The Mars Exploration Student Data Team Program was created and prototyped during the Mars Exploration Rover mission this past January through April. Over 500 students from 25 schools from across the US participated in real-time data analysis using the Mars Odyssey and Mars Global Surveyor infrared instruments -Thermal Emission Spectrometer - TES and THEMIS to monitor the rover landing sites. This program utilized a virtual team format and allowed high school students to collaborate with other teams that were, at times, thousands of miles away to implement real-time observations. This program will be carried forward to several of the upcoming missions. Finally, the Athena Student Intern Program is the higher end of involvement for students and teachers. These students and teachers were competitively selected to spend a week during the mission operations of the rovers at JPL. All of these programs have a common thread..ownership of the experience. By empowering the next generation of learners with the knowledge that they can be part of their future through such immersive experiences before they reach college, they will be ready to take on harder challenges that will reach higher towards new frontiers

High Tech Art: Chameleon Glass

NASA Technical Reports Server (NTRS)

1993-01-01

Dichroic Glass is a technology wherein extremely thin films of metal are vacuum deposited on a glass surface. The coated glass shields spacecraft instruments from cosmic radiation and protects human vision from unfiltered sunlight in space. Because the coating process allows some wavelengths of light and color to reflect and others to pass through, a chameleon effect is produced. Murray Schwartz, a former aerospace engineer, has based his business KROMA on this NASA optical technology. He produces dichroic stained glass windows, mobiles and jewelry. The technique involves deposition of super thin layers of metal oxides applied one layer at a time in a specific order and thickness for the desired effect. His product line is unique and has been very successful.

Geophysical data from offshore of the Gulf Islands National Seashore, Cat Island to Western Horn Island, Mississippi

USGS Publications Warehouse

Pendleton, E.A.; Baldwin, W.E.; Danforth, W.W.; DeWitt, N.T.; Forde, A.S.; Foster, D.S.; Kelso, K.W.; Pfeiffer, W.R.; Turecek, A.M.; Flocks, J.G.; Twichell, D.C.

2011-01-01

This report contains the geophysical and geospatial data that were collected along the western offshore side of the Gulf Islands of Mississippi on the research vessel Tommy Munro during two cruises in 2010. Geophysical data were collected by the U.S. Geological Survey in Woods Hole, Massachusetts, and St. Petersburg, Forida, in cooperation with the U.S. Army Corps of Engineers Mobile District. Bathymetric-sonar, sidescan-sonar, and Chirp seismic-reflection data were acquired with the following equipment, respectively: Systems Engineering and Assessment, Ltd., SwathPlus interferometric sonars; Klein 3000 and 3900 dual-frequency sidescan sonars; and an EdgeTech 512i Chirp sub-bottom profiling system. The long-term goals of this mapping effort are to produce high-quality, high-resolution geologic maps and interpretations that can be utilized to identify sand resources within the region, to better understand the Holocene evolution, and to anticipate future changes in this coastal system. Processed geospatial data files and the geophysical data provided in this report help attain these goals.

Implementation of a Goal-Based Systems Engineering Process Using the Systems Modeling Language (SysML)

NASA Technical Reports Server (NTRS)

Breckenridge, Jonathan T.; Johnson, Stephen B.

2013-01-01

This paper describes the core framework used to implement a Goal-Function Tree (GFT) based systems engineering process using the Systems Modeling Language. It defines a set of principles built upon by the theoretical approach described in the InfoTech 2013 ISHM paper titled "Goal-Function Tree Modeling for Systems Engineering and Fault Management" presented by Dr. Stephen B. Johnson. Using the SysML language, the principles in this paper describe the expansion of the SysML language as a baseline in order to: hierarchically describe a system, describe that system functionally within success space, and allocate detection mechanisms to success functions for system protection.

Tech Gets Physical

ERIC Educational Resources Information Center

Ravage, Barbara

2011-01-01

As colleges push for increased efficiencies, facilities departments nationwide are turning more and more to high-tech approaches. Nowhere has this trend been more visible than in the realm of energy consumption, where managers hope to extract significant cost savings. Technology is helping facilities managers achieve significant efficiencies,…

Advances in Thrust-Based Emergency Control of an Airplane

NASA Technical Reports Server (NTRS)

Creech, Gray; Burken, John J.; Burcham, Bill

2003-01-01

Engineers at NASA's Dryden Flight Research Center have received a patent on an emergency flight-control method implemented by a propulsion-controlled aircraft (PCA) system. Utilizing the preexisting auto-throttle and engine-pressure-ratio trim controls of the airplane, the PCA system provides pitch and roll control for landing an airplane safely without using aerodynamic control surfaces that have ceased to function because of a primary-flight-control-system failure. The installation of the PCA does not entail any changes in pre-existing engine hardware or software. [Aspects of the method and system at previous stages of development were reported in Thrust-Control System for Emergency Control of an Airplane (DRC-96-07), NASA Tech Briefs, Vol. 25, No. 3 (March 2001), page 68 and Emergency Landing Using Thrust Control and Shift of Weight (DRC-96-55), NASA Tech Briefs, Vol. 26, No. 5 (May 2002), page 58.]. Aircraft flight-control systems are designed with extensive redundancy to ensure low probabilities of failure. During recent years, however, several airplanes have exhibited major flight-control-system failures, leaving engine thrust as the last mode of flight control. In some of these emergency situations, engine thrusts were successfully modulated by the pilots to maintain flight paths or pitch angles, but in other situations, lateral control was also needed. In the majority of such control-system failures, crashes resulted and over 1,200 people died. The challenge lay in creating a means of sufficient degree of thrust-modulation control to safely fly and land a stricken airplane. A thrust-modulation control system designed for this purpose was flight-tested in a PCA an MD-11 airplane. The results of the flight test showed that without any operational control surfaces, a pilot can land a crippled airplane (U.S. Patent 5,330,131). The installation of the original PCA system entailed modifications not only of the flight-control computer (FCC) of the airplane but also of each engine-control computer. Inasmuch as engine-manufacturer warranties do not apply to modified engines, the challenge became one of creating a PCA system that does not entail modifications of the engine computers.

GATE Center for Automotive Fuel Cell Systems at Virginia Tech

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nelson, Douglas

2011-09-30

The Virginia Tech GATE Center for Automotive Fuel Cell Systems (CAFCS) achieved the following objectives in support of the domestic automotive industry: Expanded and updated fuel cell and vehicle technologies education programs; Conducted industry directed research in three thrust areas development and characterization of materials for PEM fuel cells; performance and durability modeling for PEM fuel cells; and fuel cell systems design and optimization, including hybrid and plug-in hybrid fuel cell vehicles; Developed MS and Ph.D. engineers and scientists who are pursuing careers related to fuel cells and automotive applications; Published research results that provide industry with new knowledge whichmore » contributes to the advancement of fuel cell and vehicle systems commercialization. With support from the Dept. of Energy, the CAFCS upgraded existing graduate course offerings; introduced a hands-on laboratory component that make use of Virginia Tech's comprehensive laboratory facilities, funded 15 GATE Fellowships over a five year period; and expanded our program of industry interaction to improve student awareness of challenges and opportunities in the automotive industry. GATE Center graduate students have a state-of-the-art research experience preparing them for a career to contribute to the advancement fuel cell and vehicle technologies.« less

Skill Acquisition in "High Tech" Export Agriculture: A Case Study of Lifelong Learning in Peru's Asparagus Industry

ERIC Educational Resources Information Center

Carnoy, Martin; Luschei, Thomas F.

2008-01-01

As one of the world's largest exporters of asparagus, Peru has developed a high-tech system of asparagus production, processing and delivery that requires well-trained and responsive workers. In this study we examine the role of both private and public sectors in preparing workers for the asparagus industry and the implications of this skill…

East Europe Report

DTIC Science & Technology

1986-10-23

economic crisis, unemployment; the impact of new tech- nologies on the workers; the attack on welfare results achieved by the trade unions, and against...remaining 80 percent in the second half! Electric Construction [ Economic Combine], for example, has a target as subcontractor of 3,865,000 leva, yet...exports of electronic and electrical engineering industrial output. A large number of economic organizations are serviced by the

Producing Hi-Tech: Globalization, the State and Migrant Subjects

ERIC Educational Resources Information Center

Kamat, Sangeeta; Mir, Ali; Mathew, Biju

2004-01-01

This paper examines the role of the state in the context of globalization. Taking up the specific case of Indian software engineers and their migration to the USA, the authors show the involvement of the Indian state and the US at different levels. The growth of the IT labour sector was based on changes in the higher education policy of the Indian…

ManTech Affordability for Defense Weapon Systems

DTIC Science & Technology

2009-11-01

the Virginia Class Submarine Development of Friction Stir Welding for Navy Expeditionary Fighting Vehicle (EFV) Hull Components Procurement...Tile 2007 – Translational Friction Stir Welding 2006 – Engine Rotor Life Extension 2006 – Uncooled Focal Plane Array Producibility 2005 – Large...DDG 1000 with Hybrid Laser Arc Welding The Problem: T-Beam stiffeners, used extensively for decks, bulkheads, and other ship structures, are being

Materials Science and Engineering |

Science.gov Websites

? UNDERGRADUATE GRADUATE FACULTY DIRECTORY STAFF DIRECTORY RESEARCH RET PROGRAM ALUMNI EMPLOYMENT GIVE TO MSE at CS ManTech Christou and students travel to Austin, TX to present short course and diamond power Alumni Assoc. June 22, 2018 8:00 a.m.-4:30 p.m. Samuel Riggs IV Alumni Center (7801 Alumni Drive, College

Transforming Tech Ed: The Advanced Technological Education Community Leads in Developing and Implementing Teaching Strategies

ERIC Educational Resources Information Center

Patton, Madeline

2015-01-01

After years of working in the background to build the capacity of two-year college science, technology, engineering and math (STEM) faculty and the skills of technicians, the Advanced Technological Education (ATE) program is gaining recognition as a source of STEM workforce expertise. The ATE program's effective mentoring of STEM educators and its…

Rapid Sediment Characterization Tools

DTIC Science & Technology

2008-09-01

sensitive to organic and inorganic toxicants as mysid shrimp, silverside fish, chain diatoms, and sea urchins . The data from the bioassay can be...correlated with more conventional toxicity tests, such as amphipod and sea urchin development [17], [23]. The QwikLite Testing System™ can be used for...7 Barajas and Associates with Tetra Tech, op. cit. 8 Battelle, SEA Engineering and Neptune and Company. 2005

FlexTech{trademark}

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wilhelm, B.

1996-12-31

Information is presented on a 110 MWe atmospheric CFB located in the Czech Republic firing brown coal. The following topics are discussed: fuel analysis; boiler design parameters; CFB fluidizing nozzle; and project time schedule. Information is also given on a 200 MWe atmospheric CFB located in the Republic of Korea firing Korean anthracite. Data are presented on fuel specifications; predicted performance; and engineering and construction schedule.

Exciting Young Students in Grades K-8 about STEM through an Afterschool Robotics Challenge

ERIC Educational Resources Information Center

Karp, Tanja; Maloney, Patricia

2013-01-01

In this paper, we describe the successful implementation of an afterschool LEGO robotics program for elementary and middle school students that is annually offered by the Whitacre College of Engineering at Texas Tech University. Three events are held on campus: the kickoff, a trial run, and the competition, spread over a period of eight weeks. In…

Enhancing the Connection to Undergraduate Engineering Students: A Hands-On and Team-Based Approach to Fluid Mechanics

ERIC Educational Resources Information Center

Wei, Tie; Ford, Julie

2015-01-01

This article provides information about the integration of innovative hands-on activities within a sophomore-level Fluid Mechanics course at New Mexico Tech. The course introduces students to the fundamentals of fluid mechanics with emphasis on teaching key equations and methods of analysis for solving real-world problems. Strategies and examples…

Robot Rocket Rally

NASA Image and Video Library

2014-03-14

CAPE CANAVERAL, Fla. – A child gets an up-close look at Charli, an autonomous walking robot developed by Virginia Tech Robotics, during the Robot Rocket Rally. The three-day event at Florida's Kennedy Space Center Visitor Complex is highlighted by exhibits, games and demonstrations of a variety of robots, with exhibitors ranging from school robotics clubs to veteran NASA scientists and engineers. Photo credit: NASA/Kim Shiflett

Creation of security engineering programs by the Southwest Surety Institute

NASA Astrophysics Data System (ADS)

Romero, Van D.; Rogers, Bradley; Winfree, Tim; Walsh, Dan; Garcia, Mary Lynn

1998-12-01

The Southwest Surety Institute includes Arizona State University (ASU), Louisiana State University (LSU), New Mexico Institute of Mining and Technology (NM Tech), New Mexico State University (NMSU), and Sandia National Laboratories (SNL). The universities currently offer a full spectrum of post-secondary programs in security system design and evaluation, including an undergraduate minor, a graduate program, and continuing education programs. The programs are based on the methodology developed at Sandia National Laboratories over the past 25 years to protect critical nuclear assets. The programs combine basic concepts and principles from business, criminal justice, and technology to create an integrated performance-based approach to security system design and analysis. Existing university capabilities in criminal justice (NMSU), explosives testing and technology (NM Tech and LSU), and engineering technology (ASU) are leveraged to provide unique science-based programs that will emphasize the use of performance measures and computer analysis tools to prove the effectiveness of proposed systems in the design phase. Facility managers may then balance increased protection against the cost of implementation and risk mitigation, thereby enabling effective business decisions. Applications expected to benefit from these programs include corrections, law enforcement, counter-terrorism, critical infrastructure protection, financial and medical care fraud, industrial security, and border security.

The First Robotics Rocket City Regional Competition

NASA Image and Video Library

2018-03-16

Johnny Stephenson, director of NASA Marshall Space Flight Center's Office of Strategic Analysis & Communications, addresses the crowd during the March 16 award ceremony following the first day of competition at the FIRST Robotics Rocket City Regional at the Von Braun Center in Huntsville. Ed Sparks, of the Morgan County Mech Tech team, received the award for Volunteer of the Year at the March 16 award ceremony. Mech Tech, comprised of students from five high schools in Morgan County, Alabama, also won the Industrial Design Award. The team was one of three regional finalists that will advance to the FIRST national championships April 18-21 in Houston. The other two regional finalists were Burning Magnetos of Fort Dorchester High School in North Charleston, South Carolina, and OGRE of Opelika High School in Opelika, Alabama. Mech Tech and Golden Hurricane from Columbia High School in Huntsville, were "house" teams sponsored by Marshall.

Difference of the associations between self-rated health and demographic characteristics, lifestyle, and psychosocial work environment between two types of Chinese worksite.

PubMed

Jia, Yingnan; Gao, Junling; Dai, Junming; Zheng, Pinpin; Wu, Xiaoyu; Li, Guangyao; Fu, Hua

2014-08-15

Although studies of self-rated health (SRH) are conducted widely in developed countries, comprehensive assessments of the determinants of SRH in Chinese are scarce, particularly for working Chinese individuals. Determinants of SRH might differ among worksites based on differences in the nature and stress associated with different jobs, work intensity, and the lifestyles of employees. Two thousand and forty questionnaires that addressed SRH, demographic characteristics, lifestyle, and the psychosocial work environment were administered to employees at two worksites. A total of 1644 subjects provided complete data for analysis (80.6% response rate). Participants from government departments had significantly better SRH than did those from high-tech enterprises (61.1% vs. 67.5%, respectively). Lifestyles were significantly less healthy at government departments compared with high-tech enterprises, whereas the psychosocial work environment was better. The results of unadjusted and adjusted models revealed differences between the potential health-influencing factors of participants based on their type of worksite. In logistic regression models, gender was strongly associated with SRH in all participants, whereas length of service was correlated with SRH only in participants from high-tech enterprises. In high-tech enterprises, good SRH was less common in physically inactive subjects vs. physically active participants (OR = 0.561). In government departments, passive smoking was negatively associated with SRH significantly. Social capital (OR = 1.073) and job control (OR = 1.550) were positively correlated with SRH in high-tech enterprises. Job control was the only psychosocial factor significantly associated with SRH in government departments. Participants from different types of worksite reported different SRH, healthy lifestyles, and psychosocial work environments. Moreover, the association between SRH and demographic characteristics, lifestyle, and the psychosocial work environment significantly differed by type of worksite.

Effects of an 8-Week Outdoor Brisk Walking Program on Fatigue in Hi-Tech Industry Employees: A Randomized Control Trial.

PubMed

Wu, Li-Ling; Wang, Kuo-Ming; Liao, Po-I; Kao, Yu-Hsiu; Huang, Yi-Ching

2015-10-01

Over 73% of hi-tech industry employees in Taiwan lack regular exercise. They are exposed to a highly variable and stressful work environment for extended periods of time, and may subsequently experience depression, detrimental to workers' physiological and mental health. In this cross-sectional survey, the authors explored the effect of an 8-week brisk walking program on the fatigue of employees in the hi-tech industry. The participants, from a hi-tech company in northern Taiwan, were randomly assigned to an experimental group (EG; 41 subjects, Mage = 33.34 ± 6.40) or control group (CG; 45 subjects, Mage = 29.40 ± 3.60). Following the 8-week brisk walking program, the EG showed significantly lower scores for subjective fatigue, working motivation, attention, and overall fatigue. The authors confirmed that the 8-week outdoor brisk walking program significantly improved the level of fatigue among employees of the hi-tech industry. The finding serves as an important reference for health authorities in Taiwan and provides awareness of workplace health promotion in the hi-tech industry. © 2015 The Author(s).

Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries.

PubMed

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance-performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA-DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed.

Low-Tech High-Tech.

ERIC Educational Resources Information Center

Hart, Tom

1997-01-01

Outlines how Compact Disc-interactive (CD-i)--software that looks like a CD-ROM but operates independently using a television set--can be used in elementary, secondary, and vocational education. Discusses the cost effectiveness of CD-i and compares costs and operational issues with CD-ROM. Describes special features of one CD-i program,…

Low-Tech Education Threatens the High-Tech Future.

ERIC Educational Resources Information Center

Business Week, 1983

1983-01-01

Indicating that the quality of scientific/technical education in the United States has been slipping since the brief surge of attention in the decade following Sputnik, discusses the need for upgrading science/technical education. Includes efforts currently under way, including financial support by industry and donations of equipment and computers…

Examination of the New Tech Model as a Holistic Democracy

ERIC Educational Resources Information Center

Bradley-Levine, Jill; Mosier, Gina

2017-01-01

Using the Degrees of Democracy Framework (Woods & Woods, 2012), we examined eight New Tech (NT) high schools to determine the extent to which they demonstrated characteristics of holistic democracy. We collected qualitative data, including observations and interviews during the fourth year of implementation. Findings indicated that the eight…

Recruitment and Selection of Minorities in High-Tech Organizations. A Sociological Perspective.

DTIC Science & Technology

1984-09-01

Gretchen M. Luebbe Doris R. Entwisle Nancy A. Madden Joyce L. Epstein Kirk Nabors James Fennessey Alejandro Portes Denise C. Gottfredson Donald C. Rickert...Jr. Gary D. Gottfredson Laura Hersh Salganik Linda S. Gottfredson Robert E. Slavin Edward J. Harsch Jane St. John John H. Hollifield Valarie...and intelligence --as the primary determinants of minority and female underrepresentation in high-tech occupations. Despite voluminous research

Dissertations for Degrees in Science and Engineering Defended at USSR Higher Educational Institutions.

DTIC Science & Technology

1960-08-03

copies. 5 PILKOV, Ye. V., Cand Tech Sei — "Study of distortions in the reproduction of color television images in a tube with striated screen...copies0 D0VGÖP0LYY, G. I., Cand Agr Sci — "Peculiarities of the raising of tomato seedlings in food pots in the Ukraine." Khar’kov, 1959, 20 pp (Min of...Order bf Lenin Inst of Engineers of Railroad Transport im Academician V4N. Obraztsov), l50 copies» BARANOVA, K.V., Cand Agr Sei -* » Effectof the

Effects of job-related stress and burnout on asthenopia among high-tech workers.

PubMed

Ostrovsky, Anat; Ribak, Joseph; Pereg, Avihu; Gaton, Dan

2012-01-01

Eye- and vision-related symptoms are the most frequent health problems among computer users. The findings of eye strain, tired eyes, eye irritation, burning sensation, redness, blurred vision and double vision, when appearing together, have recently been termed 'computer vision syndrome', or asthenopia. To examine the frequency and intensity of asthenopia among individuals employed in research and development departments of high-tech firms and the effects of job stress and burnout on ocular complaints, this study included 106 subjects, 42 high-tech workers (study group) and 64 bank employees (control group). All participants completed self-report questionnaires covering demographics, asthenopia, satisfaction with work environmental conditions, job-related stress and burnout. There was a significant between-group difference in the intensity of asthenopia, but not in its frequency. Burnout appeared to be a significant contributing factor to the intensity and frequency of asthenopia. This study shows that burnout is a significant factor in asthenopic complaints in high-tech workers. This manuscript analyses the effects of psychological environmental factors, such as job stress and burnout, on ocular complaints at the workplace of computer users. The findings may have an ergonomic impact on how to improve health, safety and comfort of the working environment among computer users, for better perception of the job environment, efficacy and production.

Increased Risk of Respiratory Mortality Associated with the High-Tech Manufacturing Industry: A 26-Year Study

PubMed Central

Lin, Ro-Ting; Christiani, David C.; Kawachi, Ichiro; Chan, Ta-Chien; Chiang, Po-Huang; Chan, Chang-Chuan

2016-01-01

Global high-tech manufacturers are mainly located in newly industrialized countries, raising concerns about adverse health consequences from industrial pollution for people living nearby. We investigated the ecological association between respiratory mortality and the development of Taiwan’s high-tech manufacturing, taking into account industrialization and socioeconomic development, for 19 cities and counties—6 in the science park group and 13 in the control group—from 1982 to 2007. We applied a linear mixed-effects model to analyze how science park development over time is associated with age-adjusted and sex-specific mortality rates for asthma and chronic obstructive pulmonary disease (COPD). Asthma and female COPD mortality rates decreased in both groups, but they decreased 9%–16% slower in the science park group. Male COPD mortality rates increased in both groups, but the rate increased 10% faster in the science park group. Science park development over time was a significant predictor of death from asthma (p ≤ 0.0001) and COPD (p = 0.0212). The long-term development of clustered high-tech manufacturing may negatively affect nearby populations, constraining health advantages that were anticipated, given overall progress in living standards, knowledge, and health services. National governments should incorporate the long-term health effects on local populations into environmental impact assessments. PMID:27271647

Increased Risk of Respiratory Mortality Associated with the High-Tech Manufacturing Industry: A 26-Year Study.

PubMed

Lin, Ro-Ting; Christiani, David C; Kawachi, Ichiro; Chan, Ta-Chien; Chiang, Po-Huang; Chan, Chang-Chuan

2016-06-03

Global high-tech manufacturers are mainly located in newly industrialized countries, raising concerns about adverse health consequences from industrial pollution for people living nearby. We investigated the ecological association between respiratory mortality and the development of Taiwan's high-tech manufacturing, taking into account industrialization and socioeconomic development, for 19 cities and counties-6 in the science park group and 13 in the control group-from 1982 to 2007. We applied a linear mixed-effects model to analyze how science park development over time is associated with age-adjusted and sex-specific mortality rates for asthma and chronic obstructive pulmonary disease (COPD). Asthma and female COPD mortality rates decreased in both groups, but they decreased 9%-16% slower in the science park group. Male COPD mortality rates increased in both groups, but the rate increased 10% faster in the science park group. Science park development over time was a significant predictor of death from asthma (p ≤ 0.0001) and COPD (p = 0.0212). The long-term development of clustered high-tech manufacturing may negatively affect nearby populations, constraining health advantages that were anticipated, given overall progress in living standards, knowledge, and health services. National governments should incorporate the long-term health effects on local populations into environmental impact assessments.

NASA Tech Briefs, February 2009

NASA Technical Reports Server (NTRS)

2009-01-01

Tech Briefs are short announcements of innovations originating from research and development activities of the National Aeronautics and Space Administration. They emphasize information considered likely to be transferable across industrial, regional, or disciplinary lines and are issued to encourage commercial application. Topics covered include: Measuring Low Concentrations of Liquid Water in Soil; The Mars Science Laboratory Touchdown Test Facility; Non-Contact Measurement of Density and Thickness Variation in Dielectric Materials; Compact Microwave Fourier Spectrum Analyzer; InP Heterojunction Bipolar Transistor Amplifiers to 255 GHz; Combinatorial Generation of Test Suites; In-Phase Power-Combined Frequency Tripler at 300 GHz; Electronic System for Preventing Airport Runway Incursions; Smaller but Fully Functional Backshell for Cable Connector; Glove-Box or Desktop Virtual-Reality System; Composite Layer Manufacturing with Fewer Interruptions; Improved Photoresist Coating for Making CNT Field Emitters; A Simplified Diagnostic Method for Elastomer Bond Durability; Complex Multifunctional Polymer/Carbon-Nanotube Composites; Very High Output Thermoelectric Devices Based on ITO Nanocomposites; Reducing Unsteady Loads on a Piggyback Miniature Submarine; Ultrasonic/Sonic Anchor; Grooved Fuel Rings for Nuclear Thermal Rocket Engines; Pulsed Operation of an Ion Accelerator; Autonomous Instrument Placement for Mars Exploration Rovers; Mission and Assets Database; TCP/IP Interface for the Satellite Orbit Analysis Program (SOAP); Trajectory Calculator for Finite-Radius Cutter on a Lathe; Integrated System Health Management Development Toolkit.

Utah's Mobile Earth Science Outreach Vehicle

NASA Astrophysics Data System (ADS)

Schoessow, F. S.; Christian, L.

2016-12-01

Students at Utah State University's College of Natural Resources have engineered the first mobile Earth Science outreach platform capable of delivering high-tech and interactive solar-powered educational resources to the traditionally-underserved, remote communities of rural Utah. By retrofitting and modifying an industrial box-truck, this project effectively created a highly mobile and energy independent "school in a box" which seeks to help change the way that Earth science is communicated, eliminate traditional barriers, and increase science accessibility - both physically and conceptually. The project's education platform is focused on developing a more effective, sustainable, and engaging platform for presenting Earth science outreach curricula to community members of all ages in an engaging fashion. Furthermore, this project affords university students the opportunity to demonstrate innovative science communication techniques, translating vital university research into educational outreach operations aimed at doing real, measurable good for local communities.

Construction of a high-tech operating room for image-guided surgery using VR.

PubMed

Suzuki, Naoki; Hattori, Asaki; Suzuki, Shigeyuki; Otake, Yoshito; Hayashibe, Mitsuhiro; Kobayashi, Susumu; Nezu, Takehiko; Sakai, Haruo; Umezawa, Yuji

2005-01-01

This project aimed to construct an operating room to implement high dimensional (3D, 4D) medical imaging and medical virtual reality techniques that would enable clinical tests for new surgical procedures. We designed and constructed such an operating room at Dai-san Hospital, the Jikei Univ. School of Medicine, Tokyo, Japan. The room was equipped with various facilities for image-guided, robot and tele- surgery. In this report, we describe an outline of our "high-tech operating room" and future plans.

Gas Emission Measurements from the RD 180 Rocket Engine

NASA Technical Reports Server (NTRS)

Ross, H. R.

2001-01-01

The Science Laboratory operated by GB Tech was tasked by the Environmental Office at the NASA Marshall Space Flight Center (MSFC) to collect rocket plume samples and to measure gaseous components and airborne particulates from the hot test firings of the Atlas III/RD 180 test article at MSFC. This data will be used to validate plume prediction codes and to assess environmental air quality issues.

50th Annual Technical Meeting of the Society of Engineering Science (SES)

DTIC Science & Technology

2014-08-15

McDowell (Gerogia Tech), Min Zhou () Virtual Characterization of composites with Lamination Defects for wind turbine spar cap MUKUNDAN SRINIVASAN...Zhang (IHCP Singapore) Damage Mechanisms in Irradiated Metallic Glasses Richard Baumer (MIT), Michael Demkowicz (MIT) Slip Avalanches in Amorphous...Michigan, 48090) Atomistic Simulations of c+a Pyramidal Slip in Magnesium Single Crystal under Compression Xiaozhi Tang (MIT & BJTU), Yafang Guo

Rotorwash Operational Footprint Modeling

DTIC Science & Technology

2014-07-01

tests on sheet debris in the Texas Tech University wind tunnel. The goals of the research project were to 1) examine flight initiation wind speeds...derivative, requires further investigation for potential improvement based on post 1994 flight test data. It also requires further development for 360...Impact Testing ,” Journal of Structural Engineering, ASCE, Vol. 133, February 2007, pp. 274-282. 27. Marsh, K. R., " Research on VTOL Water Hover

Robot Rocket Rally

NASA Image and Video Library

2014-03-14

CAPE CANAVERAL, Fla. – Students gather to watch as a DARwin-OP miniature humanoid robot from Virginia Tech Robotics demonstrates its soccer abilities at the Robot Rocket Rally. The three-day event at Florida's Kennedy Space Center Visitor Complex is highlighted by exhibits, games and demonstrations of a variety of robots, with exhibitors ranging from school robotics clubs to veteran NASA scientists and engineers. Photo credit: NASA/Kim Shiflett

Tu(r)ning weakness to strength: Mechanomutable bioinspired materials

DTIC Science & Technology

2017-04-03

into Strength,” Bio-inspired Materials, Potsdam, Germany March 2012 - “Nonlinear behaviour of silk minimizes damage and begets spider web robustness...atoms to structures – how spiders turn weakness into strength,” Society of Engineering Science Meeting, Atlanta, GA Keynote Lecture October 2012...Georgia Tech, October 19, 2015, Atlanta, GA October 2015 DISTRIBUTION A: Distribution approved for public release. 8 - "Multiscale materials by

Integrated design and manufacturing for the high speed civil transport

NASA Technical Reports Server (NTRS)

Lee, Jae Moon; Gupta, Anurag; Mueller, Craig; Morrisette, Monica; Dec, John; Brewer, Jason; Donofrio, Kevin; Sturisky, Hilton; Smick, Doug; An, Meng Lin

1994-01-01

In June 1992, the School of Aerospace Engineering at Georgia Tech was awarded a three year NASA University Space Research Association (USRA) Advanced Design Program (ADP) grant to address issues associated with the Integrated Design and Manufacturing of High Speed Civil Transport (HSCT) configurations in its graduate Aerospace Systems Design courses. This report provides an overview of the on-going Georgia Tech initiative to address these design/manufacturing issues during the preliminary design phases of an HSCT concept. The new design methodology presented here has been incorporated in the graduate aerospace design curriculum and is based on the concept of Integrated Product and Process Development (IPPD). The selection of the HSCT as a pilot project was motivated by its potential global transportation payoffs; its technological, environmental, and economic challenges; and its impact on U.S. global competitiveness. This pilot project was the focus of each of the five design courses that form the graduate level aerospace systems design curriculum. This year's main objective was the development of a systematic approach to preliminary design and optimization and its implementation to an HSCT wing/propulsion configuration. The new methodology, based on the Taguchi Parameter Design Optimization Method (PDOM), was established and was used to carry out a parametric study where various feasible alternative configurations were evaluated. The comparison criterion selected for this evaluation was the economic impact of this aircraft, measured in terms of average yield per revenue passenger mile ($/RPM).

Using Mars Mission Analogs and Authentic Experiences to Stimulate STEM Learning in K-14 Students

NASA Astrophysics Data System (ADS)

Klug, S. L.; Grigsby, B.; Valderrama, P.; Watt, K.

2005-12-01

Today, in many of the classrooms across our nation, K-12 educators are finding it more difficult to engage their students in the subjects that will help them to succeed to a more productive way of life - science, technology, engineering, and math (STEM). Finally, add to this formidable task a diverse set of learners (demographically and skill level) of an average classroom and the constraints of high stakes testing. Quite a challenge, indeed! The Arizona State University (ASU) Mars Education Program, in partnership with the Jet Propulsion Laboratory Mars Public Engagement Team have created programming, curriculum, and activities that help to bridge the gap between STEM learning and student interest. Starting with the Standards in the STEM areas - the areas which teachers are tasked to teach already, our team has modeled the STEM-based curriculum after the way that NASA's Mars team conducts their work and research. There is much challenge in the statement "Science for All Americans" when it comes to applying it equally to all classrooms across the U.S. To make sure that these curricular materials and hands-on experiences are available to any teacher and student, the ASU Mars Education Program has adopted a "high-tech, low-tech, and no-tech" approach. In other words, materials and programming have to be available and doable with whatever capabilities a classroom might possess. Using this approach, successful examples of Mars-based educational materials include Marsbound and the Mars Student Imaging Project. The Marsbound simulation is based on National Technology Standards and seemingly low tech. However, the simplicity of this simulation is quickly forgotten as it follows the familiar NASA scenario of building a mission to Mars with engineering constraints. Student teams use a set of equipment cards and a playmat (both available at no cost) to build their mission and balance it according to the constraints given. Students soon realize there is a lot of complexity to achieve science goals, populate a spacecraft with a meaningful payload for science return, not exceed mass margins, and stay within budget. A full set of Standards-based activities and curriculum are also available for the teacher at the same website. The Mars Student Imaging Project (MSIP) is an authentic research experience available to 5th grade - early college student teams across the U.S. During this program, students formulate a question about Mars, write a proposal, and target an image at Mars using the Thermal Emission Imaging System camera (THEMIS) onboard the Mars Odyssey spacecraft. The students then analyze the image and report their findings to NASA. As of June 2005, over 10,000 students have participated in MSIP. The data gathered on this program shows a high rate of interest in students of all ages, demographics, skill levels, and diverse audiences. To sustain our country and the ability to be a nation that will continue to lead and move forward educationally, technologically, and scientifically, we as educators and trainers of educators must persevere to reach diverse audiences in ways that will resonate with our customers - the students. We must pay attention to important issues such as accessibility, cost, Standards, teacher concerns and student interest.

Radiation Insulation

NASA Technical Reports Server (NTRS)

1995-01-01

The Apollo and subsequent spacecraft have had highly effective radiation barriers; made of aluminized polymer film, they bar or let in heat to maintain consistent temperatures inside. Tech 2000, formerly Quantum International Corporation used the NASA technology in its insulating materials, Super "Q" Radiant Barrier, for home, industry and mobile applications. The insulation combines industrial aluminum foil overlaid around a core of another material, usually propylene or mylar. The outer layer reflects up to 97 percent of heat; the central layer creates a thermal break in the structure and thus allows low radiant energy emission. The Quantum Cool Wall, used in cars and trucks, takes up little space while providing superior insulation, thus reducing spoilage and costs. The panels can also dampen sound and engine, exhaust and solar heat.

Perspectives on Advanced Learning Technologies and Learning Networks and Future Aerospace Workforce Environments

NASA Technical Reports Server (NTRS)

Noor, Ahmed K. (Compiler)

2003-01-01

An overview of the advanced learning technologies is given in this presentation along with a brief description of their impact on future aerospace workforce development. The presentation is divided into five parts (see Figure 1). In the first part, a brief historical account of the evolution of learning technologies is given. The second part describes the current learning activities. The third part describes some of the future aerospace systems, as examples of high-tech engineering systems, and lists their enabling technologies. The fourth part focuses on future aerospace research, learning and design environments. The fifth part lists the objectives of the workshop and some of the sources of information on learning technologies and learning networks.

Review on the progress of ultra-precision machining technologies

NASA Astrophysics Data System (ADS)

Yuan, Julong; Lyu, Binghai; Hang, Wei; Deng, Qianfa

2017-06-01

Ultra-precision machining technologies are the essential methods, to obtain the highest form accuracy and surface quality. As more research findings are published, such technologies now involve complicated systems engineering and been widely used in the production of components in various aerospace, national defense, optics, mechanics, electronics, and other high-tech applications. The conception, applications and history of ultra-precision machining are introduced in this article, and the developments of ultra-precision machining technologies, especially ultra-precision grinding, ultra-precision cutting and polishing are also reviewed. The current state and problems of this field in China are analyzed. Finally, the development trends of this field and the coping strategies employed in China to keep up with the trends are discussed.

GaAs/Ge Solar Powered Aircraft

NASA Technical Reports Server (NTRS)

Colozza, Anthony J.; Scheiman, David A.; Brinker, David J.

1998-01-01

Unmanned Aerial Vehicles (UAV) are being proposed for many applications for many applications including surveillance, mapping and atmospheric studies. These applications require a lightweight, low speed, medium to long duration aircraft. Due to the weight, speed, and altitude constraints imposed on such an aircraft, solar array generated electric power can be a viable alternative to air-breathing engines for certain missions. Development of such an aircraft is currently being funded under the Environmental Research Aircraft and Sensor Technology (ERAST) program. NASA Lewis Research Center (LeRC) has built a Solar Electric Airplane to demonstrate UAV technology. This aircraft utilizes high efficiency Applied Solar Energy Corporation (ASEC) GaAs/Ge space solar cells. The cells have been provided by the Air Force through the ManTech Office.

The Effectiveness of the High-Tech Speech-Generating Device with Proloquo2Go App in Reducing Echolalia Utterances in a Student with Autism

ERIC Educational Resources Information Center

Alrusayni, Norah

2017-01-01

This study was conducted to determine the effectiveness of using the high-tech speech-generating device with Proloquo2Go app to reduce echolalic utterances in a student with autism during conversational speech. After observing that the iPad device with several apps was used by the students and that it served as a communication device, language…

An Analysis of Information Systems Technology Initiatives and Small Businesses in the DoD Small Business Innovation Research (SBIR) Program

DTIC Science & Technology

2012-09-01

PAGE INTENTIONALLY LEFT BLANK xv LIST OF ACRONYMS AND ABBREVIATIONS CAE Component Acquisition Executive COTS Commercial Off-The-Shelf DARPA...and reduce program lifecycle costs by expanding the pool of vendors and incorporating small innovative high -tech businesses in defense IT...acquisition. Particularly within the high -tech IT sector, small businesses have been consistently recognized as exceptional resources for the research and

Using a Mixed Model to Evaluate Job Satisfaction in High-Tech Industries

PubMed Central

Tsai, Sang-Bing; Huang, Chih-Yao; Wang, Cheng-Kuang; Chen, Quan; Pan, Jingzhou; Wang, Ge; Wang, Jingan; Chin, Ta-Chia; Chang, Li-Chung

2016-01-01

R&D professionals are the impetus behind technological innovation, and their competitiveness and capability drive the growth of a company. However, high-tech industries have a chronic shortage of such indispensable professionals. Accordingly, reducing R&D personnel turnover has become a major human resource management challenge facing innovative companies. This study combined importance–performance analysis (IPA) with the decision-making trial and evaluation laboratory (DEMATEL) method to propose an IPA–DEMATEL model. Establishing this model involved three steps. First, an IPA was conducted to measure the importance of and satisfaction gained from job satisfaction criteria. Second, the DEMATEL method was used to determine the causal relationships of and interactive influence among the criteria. Third, a criteria model was constructed to evaluate job satisfaction of high-tech R&D personnel. On the basis of the findings, managerial suggestions are proposed. PMID:27139697

Entrepreneurship.

PubMed

Yetisen, Ali K; Volpatti, Lisa R; Coskun, Ahmet F; Cho, Sangyeon; Kamrani, Ehsan; Butt, Haider; Khademhosseini, Ali; Yun, Seok Hyun

2015-01-01

High-tech businesses are the driving force behind global knowledge-based economies. Academic institutions have positioned themselves to serve the high-tech industry through consulting, licensing, and university spinoffs. The awareness of commercialization strategies and building an entrepreneurial culture can help academics to efficiently transfer their inventions to the market to achieve the maximum value. Here, the concept of high-tech entrepreneurship is discussed from lab to market in technology-intensive sectors such as nanotechnology, photonics, and biotechnology, specifically in the context of lab-on-a-chip devices. This article provides strategies for choosing a commercialization approach, financing a startup, marketing a product, and planning an exit. Common reasons for startup company failures are discussed and guidelines to overcome these challenges are suggested. The discussion is supplemented with case studies of successful and failed companies. Identifying a market need, assembling a motivated management team, managing resources, and obtaining experienced mentors lead to a successful exit.

Teacher Development Program for ATP 2000. Project Report.

ERIC Educational Resources Information Center

Sutphin, Dean; And Others

Agri Tech Prep 2000 (ATP 2000) is a 4-year tech prep program linking high school and postsecondary curricula designed to prepare New York students for careers in agriculture or acceptance into a college program in agriculture. Because teacher development was designated an integral project component for fiscal year 1991-1992, a weeklong teacher…

Educating Silicon Valley: Corporate Education Reform and the Reproduction of the Techno-Economic Revolution

ERIC Educational Resources Information Center

Williamson, Ben

2017-01-01

Silicon Valley's high-tech companies, tech-philanthropists, startups, and culture of venture capital are "the centre of a techno-economic revolution" that is "now spreading outwards across the world, with major societal effects and implications" (Duff 2016, 5). In this article, Ben Williamson traces and maps how education is…

Job Future's Bright for the Chefs of Muskingum Tech.

ERIC Educational Resources Information Center

Hoffman, Carl

1993-01-01

A two-year culinary arts program at Muskingum College (Zanesville, Ohio) prepares students for jobs in an emerging service-based economy. Students receive intensive classroom instruction and hands-on learning in a high-tech kitchen. Twenty-five full-time and 12 part-time students are completing their first year in the program. (LP)

Tech Prep Program in Financial Services. Final Report.

ERIC Educational Resources Information Center

Chicago Public Schools, IL.

A tech prep program in financial services, called Chicago Academy of Finance, was developed at Jones Metropolitan High School of Business and Commerce in Chicago, Illinois. The program was designed to integrate vocational and academic skills, with an emphasis on critical thinking skills. Of the 39 students initially enrolling in the first…

Combining Technology and Narrative in a Learning Environment for Workplace Training.

ERIC Educational Resources Information Center

Nelson, Wayne A.; Wellings, Paula; Palumbo, David; Gupton, Christine

In a project designed to provide training for entry-level job skills in high tech industries, a combination of narrative and technology was employed to aid learners in developing the necessary soft skills (dependability, responsibility, listening comprehension, collaboration, et cetera) sought by employers. The EnterTech Project brought together a…

Evaluating Assistive Technology in the Education of Persons with Severe Disabilities

ERIC Educational Resources Information Center

Reichle, Joe

2011-01-01

This commentary includes a brief discussion of issues raised by the articles and systematic review contained in this special issue addressing technology applications for persons with severe developmental disabilities. Topical areas include a discussion of: (1) a need to compare "high tech" with "low tech" applications, (2) procedural fidelity, (3)…

Teaching and Learning: Hokie Spirit

ERIC Educational Resources Information Center

Lindeman, Cheryl A.

2007-01-01

If teachers were to reflect about their most difficult teachable moments in their careers, the author is sure the Virginia Tech tragedy would be extremely taxing on their minds. For those teachers teaching high school seniors, who were in the process of sending deposits to Virginia Tech, it was particularly agonizing. In this article, the author…

Technology Components as Adjuncts to Family-Based Pediatric Obesity Treatment in Low-Income Minority Youth.

PubMed

Tripicchio, Gina L; Ammerman, Alice S; Neshteruk, Cody; Faith, Myles S; Dean, Kelsey; Befort, Christie; Ward, Dianne S; Truesdale, Kimberly P; Burger, Kyle S; Davis, Ann

2017-12-01

Strategies to treat pediatric obesity are needed, especially among high-need populations. Technology is an innovative approach; however, data on technology as adjuncts to in-person treatment programs are limited. A total of 64 children [body mass index (BMI) ≥85th percentile, mean age = 9.6 ± 3.1 years, 32.8% female, 84.4% Hispanic] were recruited to participate in one of three cohorts of a family-based behavioral group (FBBG) treatment program: FBBG only, TECH1, and TECH2. Rolling, nonrandomized recruitment was used to enroll participants into three cohorts from May 2014 to February 2015. FBBG began in May 2014 and received the standard, in-person 12-week treatment only (n = 21); TECH1 began in September 2014 and received FBBG plus a digital tablet equipped with a fitness app (FITNET) (n = 20); TECH2 began in February 2015 and received FBBG and FITNET, plus five individually tailored TeleMed health-coaching sessions delivered via Skype (n = 23). Child BMI z-score (BMI-z) was assessed at baseline and postintervention. Secondary aims examined weekly FBBG attendance, feasibility/acceptability of FITNET and Skype, and the effect of technology engagement on BMI-z. FBBG and TECH1 participants did not show significant reductions in BMI-z postintervention [FBBG: β = -0.05(0.04), p = 0.25; TECH1: β = -0.006(0.06), p = 0.92], but TECH2 participants did [β = -0.09(0.02), p < 0.001] and TeleMed session participation was significantly associated with BMI-z reduction [β = -0.04(0.01), p = 0.01]. FITNET use and FBBG attendance were not associated with BMI-z in any cohort. Overall, participants rated the technology as highly acceptable. Technology adjuncts are feasible, used by hard-to-reach participants, and show promise for improving child weight status in obesity treatment programs.

Robotic technology evolution and transfer

NASA Technical Reports Server (NTRS)

Marzwell, Neville I.

1992-01-01

A report concerning technology transfer in the area of robotics is presented in vugraph form. The following topics are discussed: definition of technology innovation and tech-transfer; concepts relevant for understanding tech-transfer; models advanced to portray tech-transfer process; factors identified as promoting tech-transfer; factors identified as impeding tech-transfer; what important roles do individuals fulfill in tech-transfer; federal infrastructure for promoting tech-transfer; federal infrastructure for promoting tech-transfer; robotic technology evolution; robotic technology transferred; and recommendations for successful robotics tech-transfer.

NASA Aeronautics Multidisciplinary Analysis and Design Fellowship Program

NASA Technical Reports Server (NTRS)

Grossman, B.; Guerdal, Z.; Haftka, R. T.; Kapania, R. K.; Mason, W. H.; Mook, D. T.

1998-01-01

For a number of years, Virginia Tech had been on the forefront of research in the area of multidisciplinary analysis and design. In June of 1994, faculty members from aerospace and ocean engineering, engineering science and mechanics, mechanical engineering, industrial engineering, mathematics and computer sciences, at Virginia Tech joined together to form the Multidisciplinary Analysis and Design (MAD) Center for Advanced Vehicles. The center was established with the single goal: to perform research that is relevant to the needs of the US industry and to foster collaboration between the university, government and industry. In October of 1994, the center was chosen by NASA headquarters as one of the five university centers to establish a fellowship program to develop a graduate program in multidisciplinary analysis and design. The fellowship program provides full stipend and tuition support for seven U. S. students per year during their graduate studies. To advise us regarding the problems faced by the industry, an industrial advisory board has been formed consisting of representatives from industry as well as government laboratories. The function of the advisory board is to channel information from its member companies to faculty members concerning problems that need research attention in the general area of multidisciplinary design optimization (MDO). The faculty and their graduate students make proposals to the board on how to address these problems. At the annual board meeting in Blacksburg, the board discusses the proposals and suggests which students get funded under the NASA fellowship program. All students participating in the program are required to spend 3-6 months in industry working on their research projects. We are completing the third year of the fellowship program and have had three advisory board meetings in Blacksburg.

Transition From NASA Space Communication Systems to Commerical Communication Products

NASA Technical Reports Server (NTRS)

Ghazvinian, Farzad; Lindsey, William C.

1994-01-01

Transitioning from twenty-five years of space communication system architecting, engineering and development to creating and marketing of commercial communication system hardware and software products is no simple task for small, high-tech system engineering companies whose major source of revenue has been the U.S. Government. Yet, many small businesses are faced with this onerous and perplexing task. The purpose of this talk/paper is to present one small business (LinCom) approach to taking advantage of the systems engineering expertise and knowledge captured in physical neural networks and simulation software by supporting numerous National Aeronautics and Space Administration (NASA) and the Department of Defense (DoD) projects, e.g., Space Shuttle, TDRSS, Space Station, DCSC, Milstar, etc. The innovative ingredients needed for a systems house to transition to a wireless communication system products house that supports personal communication services and networks (PCS and PCN) development in a global economy will be discussed. Efficient methods for using past government sponsored space system research and development to transition to VLSI communication chip set products will be presented along with notions of how synergy between government and industry can be maintained to benefit both parties.

NASA Multidisciplinary Design and Analysis Fellowship Program

NASA Technical Reports Server (NTRS)

Schrage, D. P.; Craig, J. I.; Mavris, D. N.; Hale, M. A.; DeLaurentis, D.

1999-01-01

This report summarizes the results of a multi-year training grant for the development and implementation of a Multidisciplinary Design and Analysis (MDA) Fellowship Program at Georgia Tech. The Program funded the creation of graduate MS and PhD degree programs in aerospace systems design, analysis and integration. It also provided prestigious Fellowships with associated Industry Internships for outstanding engineering students. The graduate program has become the foundation for a vigorous and productive research effort and has produced: 20 MS degrees, 7 Ph.D. degrees, and has contributed to 9 ongoing Ph.D. students. The results of the research are documented in 32 publications (23 of which are included on a companion CDROM) and 4 annual student design reports (included on a companion CDROM). The legacy of this critical funding is the Center for Aerospace Systems Analysis at Georgia Tech which is continuing the graduate program, the research, and the industry internships established by this grant.

NASA Tech Briefs, January 2001. Volume 25, No. 1

NASA Technical Reports Server (NTRS)

2001-01-01

The topics include: 1) A "Model" of Interactive Engineering; 2) Feature Section: Communications Technology; 3) lnReview; 4) Application Briefs; 5) Submillimeter-Wave Image Sensor; 6) Ultrasonic/Sonic Drill/Corers With Integrated Sensors; 7) Normally Closed, Piezoelectrically Actuated Microvalve; 8) Magnetostrictively Actuated Valves for Cryosurgical Probes; 9) Remote Sensing of Electric Fields in Clouds; 10) Wireless-Communication Headset Subsystem To Enhance Signaling; 11) Power Amplifier With 9 to 13 dB of Gain From 65 to 146 GHz; 12) Humidity Interlock for Protecting a Cooled Laser Crystal; 13) A Lightweight Ambulatory Physiological Monitoring System; 14) Improvements in a Lightning-Measuring Instrument; 15) Broad-Band, Noninvasive Radio-Frequency Current Probe; 16) Web-Based Technology Distributes Lean Models; 17) Software Guides Aeroelastic-Systems Design; and 18) Postprocessing Software for Micromechanics Analysis Code. A Photonics West 2001 Preview Tech Brief supplement to this January 2001 issue is also included.

Occupational Field 66 (Avionics) Less MOS’s 6682, 6683 and 6689 Task Analysis.

DTIC Science & Technology

1979-04-01

EQUIPMENT ( SACE ) TECH 011 ACFT CRYPTOGRAPHIC SYS TECI-, IMA 018 ACFT INERTIAL NAVIGATION SYSTEM (INS) SACE TECH 019 ACFT SEARCH/TRACK (SIT) SACE TECH...020 SACE SYS TECH 021 ACFT DECEPTIVE ELECTRONIC COUNTERMEASURES IDECM) TECH 022 ELECTRONIC COUNTERMEASURES (ECM) MODULE REPAIR TECH 023 ACFT ECM TECH

Integrative laser medicine and high-tech acupuncture at the medical university of graz, austria, europe.

PubMed

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue "High-Tech Acupuncture and Integrative Laser Medicine" of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine.

Integrative Laser Medicine and High-Tech Acupuncture at the Medical University of Graz, Austria, Europe

PubMed Central

Litscher, Gerhard

2012-01-01

At the moment, modernization of acupuncture has a high priority. On the traditional side, acupuncture has only recently been awarded the status of Intangible Cultural Heritage by the UNESCO. On the innovative side, high-tech acupuncture is a registered trademark in Austria. Acupuncture has been used for medical treatment for thousands of years. A large number of empirical data are available but the technical quantification of effects was not possible up to now. Using electroacupuncture, needle, or laser stimulation and modern biomedical techniques, it was possible for the first time to quantify changes in biological activities caused by acupuncture. This paper which serves as introduction for the special issue “High-Tech Acupuncture and Integrative Laser Medicine” of the present journal, focuses on the latest innovative aspects that underline the further enhancement and development of acupuncture. Special emphasis is given to new methodological and technical investigations, for example, results obtained from all kinds of acupuncture innovations (e.g., teleacupuncture) and integrative laser medicine. PMID:22570669

E-health blood pressure control program.

PubMed

Ahern, David K; Stinson, Lynda J; Uebelacker, Lisa A; Wroblewski, Joseph P; McMurray, Jerome H; Eaton, Charles B

2012-01-01

Both technological and human factors design requirements for integration of home blood pressure monitoring (HBPM) into a patient centered medical home (PCMH) model primary care practice are described. Patients with uncontrolled hypertension were given home blood pressure (BP) monitors, and after a three-month run-in period introduced to either a high-tech only (HBPM connectivity to personal health record and tailored Web portal access) or a high-tech/"high-touch" (high-tech solution plus patient navigator [PN]) solution. Features of the Web portal included: BP graphing function, traffic-light feedback system of BP goal attainment, economic incentives for self-monitoring, and dual patient-facing and care-team-facing dashboard functions. The e-health BP control system with PN support was well received by patients, providers, and the healthcare team. Current e-health technology and limited technological literacy of many patients suggest that a PN or some other personnel resource may be required for the adoption of patient-facing technology in primary care.

Using online modules is a multi-modality teaching system: a high-touch high-tech approach to geriatric education.

PubMed

Gainor, Sara Jane; Goins, R Turner; Miller, Lee Ann

2004-01-01

Making geriatric education available to rural faculty/preceptors, students, and practitioners presents many challenges. Often the only options considered for educating those in the health professions about geriatrics are either traditional face-to-face courses or distance education programs. The purpose of this paper was to examine the use of Web-based modules or courses and other distance learning technology in concert with traditional learning modalities. The Mountain State Geriatric Education Center explored the use of a multi-modal approach within a high-touch, high-tech framework. Our findings indicate the following: it is important to start where participants are ready to begin; flexibility and variety are needed; soliciting evaluative feedback from participants is valuable; there is a need to integrate distance learning with more traditional modalities; and a high-tech, high-touch approach provides a format which participants find acceptable, accessible, and attractive. This assertion does not rule out the use of technology for distance education but rather encourages educators to take advantage of a wide range of modalities, traditional and technological, to reach rural practitioners, faculty, and students.

Mining for Data

NASA Technical Reports Server (NTRS)

1998-01-01

AbTech Corporation used an F-18 HARV (High Alpha Research Vehicle) simulation developed by NASA to create an interactive computer-based prototype of the MQ (Model Quest) SV (System Validator) tool. Dryden Flight Research Center provided support to develop, test, and rapidly reprogram the validation function. AbTech's ModelQuest Enterprises highly automated and outperforms other modeling techniques to quickly discover meaningful relationships, patterns, and trends in databases. Applications include technical and business professionals in finance, marketing, business, banking, retail, healthcare, and aerospace.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Piilonen, Leo; Takeuchi, Tatsu; Minic, Djordje

This is the final report of DOE Grant DE-FG05-92ER40709 awarded to the Virginia Tech high energy physics group. It covers the period February 1, 2010 through April 30, 2013. The high energy physics program at Virginia Tech supported by this grant is organized into three tasks: A for theory (Profs. Tatsu Takeuchi and Djordje Minic), B for heavy flavor physics with the Belle and Belle II experiments (Prof. Leo Piilonen), and N for neutrino physics (Profs. Jonathan Link and Piilonen).

State of the art and recommendations. Kangaroo mother care: application in a high-tech environment.

PubMed

Nyqvist, K H; Anderson, G C; Bergman, N; Cattaneo, A; Charpak, N; Davanzo, R; Ewald, U; Ludington-Hoe, S; Mendoza, S; Pallás-Allonso, C; Peláez, J G; Sizun, J; Wiström, A M

2010-11-01

Since Kangaroo Mother Care (KMC) was developed in Colombia in the 1970s, two trends in clinical application emerged. In low-income settings, the original KMC modelis implemented. This consists of continuous (24 h/day; 7 days/week) and prolonged mother/parent-infant skin-to-skin contact; early discharge with the infant in the kangaroo position; (ideally) exclusive breastfeeding and, adequate follow up. In affluent settings, intermittent KMC with sessions of one or a few hours skin-to-skin contact for a limited period is common. As a result of the increasing evidence of the benefits of KMC for both infants and families in all intensive care settings, KMC in a high-tech environment was chosen as the topic for the first European Conference on KMC, and the clinical implementation of the KMC modelin all types of settings was discussed at the 7th International Workshop on KMC Kangaroo Mother Care protocols in high-tech Neonatal Intensive Care Units (NICU) should specify criteria for initiation, kangaroo position, transfer to/from KMC, transport in kangaroo position, kangaroo nutrition, parents'role, modification of the NICU environment, performance of care in KMC, and KMCin case of infant instability. Implementation of the original KMC method, with continuous skin-to-skin contact whenever possible, is recommended for application in high-tech environments, although scientific evaluation should continue.

State of the art and recommendations. Kangaroo mother care: application in a high-tech environment.

PubMed

Nyqvist, K H; Anderson, G C; Bergman, N; Cattaneo, A; Charpak, N; Davanzo, R; Ewald, U; Ludington-Hoe, S; Mendoza, S; Pallás-Allonso, C; Peláez, J G; Sizun, J; Widström, A-M

2010-06-01

Since Kangaroo Mother Care (KMC) was developed in Colombia in the 1970s, two trends in clinical application emerged. In low income settings, the original KMC model is implemented. This consists of continuous (24 h/day, 7 days/week) and prolonged mother/parent-infant skin-to-skin contact; early discharge with the infant in the kangaroo position; (ideally) exclusive breastfeeding; and, adequate follow-up. In affluent settings, intermittent KMC with sessions of one or a few hours skin-to-skin contact for a limited period is common. As a result of the increasing evidence of the benefits of KMC for both infants and families in all intensive care settings, KMC in a high-tech environment was chosen as the topic for the first European Conference on KMC, and the clinical implementation of the KMC model in all types of settings was discussed at the 7th International Workshop on KMC. Kangaroo Mother Care protocols in high-tech Neonatal Intensive Care Units (NICU) should specify criteria for initiation, kangaroo position, transfer to/from KMC, transport in kangaroo position, kangaroo nutrition, parents' role, modification of the NICU environment, performance of care in KMC, and KMC in case of infant instability. Implementation of the original KMC method, with continuous skin-to-skin contact whenever possible, is recommended for application in high-tech environments, although scientific evaluation should continue.

Delivery of high-tech home care by hospital-based nursing units in Quebec: clinical and technical challenges.

PubMed

Lehoux, Pascale; Richard, L; Pineault, R; Saint-Arnaud, J

2006-03-01

The role that hospital-based nurses should play in the delivery of high-tech home care, and how they should be supported in that role, are topics that remain understudied. Our research objective was to document how hospital-based nursing teams perceive and deal with the clinical and technical challenges associated with the provision of high-tech home care. Four home care interventions were selected: antibiotic intravenous therapy, parenteral nutrition, peritoneal dialysis and oxygen therapy. A self-administered survey was sent to all hospital-based units providing these interventions in the province of Quebec, Canada (n = 154; response rate: 70.8%). We used descriptive statistical analyses to derive mean values for scores on either a five- or a six-level Likert scale. Despite variation across the four interventions, our results indicate that while nursing teams believe these interventions increase patients' autonomy, they also recognize that they generate anxiety and impose constraints on patients' lives. Nurses must increase efforts to deal with both clinical and technical challenges and help patients overcome the barriers to appropriate use of home care technologies. While nursing teams generally perceive high-tech home care as beneficial, they still experience significant technical and clinical challenges. Some of these challenges could be addressed by strengthening professional training initiatives, while others require broader home care policy interventions.

High Fidelity Simulations of Large-Scale Wireless Networks (Plus-Up)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Onunkwo, Uzoma

Sandia has built a strong reputation in scalable network simulation and emulation for cyber security studies to protect our nation’s critical information infrastructures. Georgia Tech has preeminent reputation in academia for excellence in scalable discrete event simulations, with strong emphasis on simulating cyber networks. Many of the experts in this field, such as Dr. Richard Fujimoto, Dr. George Riley, and Dr. Chris Carothers, have strong affiliations with Georgia Tech. The collaborative relationship that we intend to immediately pursue is in high fidelity simulations of practical large-scale wireless networks using ns-3 simulator via Dr. George Riley. This project will have mutualmore » benefits in bolstering both institutions’ expertise and reputation in the field of scalable simulation for cyber-security studies. This project promises to address high fidelity simulations of large-scale wireless networks. This proposed collaboration is directly in line with Georgia Tech’s goals for developing and expanding the Communications Systems Center, the Georgia Tech Broadband Institute, and Georgia Tech Information Security Center along with its yearly Emerging Cyber Threats Report. At Sandia, this work benefits the defense systems and assessment area with promise for large-scale assessment of cyber security needs and vulnerabilities of our nation’s critical cyber infrastructures exposed to wireless communications.« less

Preparing Michigan Students for the Jobs of Tomorrow: The Report of the Tech Prep Task Force.

ERIC Educational Resources Information Center

Michigan State Board of Education, Lansing.

Both secondary schools and community colleges are under pressure to increase the technical content of their curricula to produce graduates who can fill highly skilled technician jobs in a changing work force. Technical Preparation (Tech Prep) Programs are partnerships between these two institutional levels that incorporate career counseling and…

Online Classes See Cheating Go High-Tech

ERIC Educational Resources Information Center

Young, Jeffrey R.

2012-01-01

Easy A's may be even easier to score these days, with the growing popularity of online courses. Tech-savvy students are finding ways to cheat that let them ace online courses with minimal effort, in ways that are difficult to detect. The issue of online cheating may rise in prominence, as more and more institutions embrace online courses, and as…

The Boeing Company's Tech Prep Story: A Community College Bridge to the School-to-Work Strategy.

ERIC Educational Resources Information Center

Gayton, Carver; Parnell, Dale

1996-01-01

Reviews the Boeing Tech Prep Program, an associate degree program combining high school and community college vocational and academic curricula. Describes the three phases of the program's development: the provision of seed grants to schools, the development of an associate degree program, and the institution of an internship program. (MAB)

From High School to Work: 150 Great Tech Prep Careers.

ERIC Educational Resources Information Center

1998

This book presents information on 150 careers in a wide variety of fields that fall under the broad category of tech prep. Each four- to five-page profile contains the following: definition of the occupation, the nature of the work, requirements for educational and work experiences needed to enter and advance, opportunities for experience and…

Project COM-TECH (Bilingual Computer- and Technology-Oriented Program), 1985-86. OEA Evaluation Report.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn. Office of Educational Assessment.

In 1985-86, Project COM-TECH offered bilingual individualized instruction to 300 limited-English proficiency students at two New York City high schools (Bushwick in Brooklyn, and Brandeis in Manhattan). Using an enrichment approach, the project provided supplementary instruction in English as a second language (ESL), native language arts, and…

Computer Problems Can Infuriate Even the Most Tech Savvy

ERIC Educational Resources Information Center

Goldsborough, Reid

2004-01-01

Which high-tech products give you the most grief? Surprisingly, more people singled out TiVo and replay digital recording systems than personal computers, according to a recent survey by Best Buy. Nine percent of people said they found these TV devices difficult to use. The same percentage found PDAs (personal digital assistants) difficult. Only 2…

Maintaining High-Tech Programs on a Low-Tech Budget

ERIC Educational Resources Information Center

Donham, Brent

2003-01-01

Technology is and will continue to be a driving force in the United States economy. The U.S. Department of Labor (2003) projects computer and data processing services to be the fastest growing segment of the economy between the years 2000-2010. A study by the National Association of Manufacturers (2001) indicates that more than 80 percent of…

High-Tech or Low-Tech? Comparing Self-Monitoring Systems to Increase Task Independence for Students with Autism

ERIC Educational Resources Information Center

Bouck, Emily C.; Savage, Melissa; Meyer, Nancy K.; Taber-Doughty, Teresa; Hunley, Megan

2014-01-01

Independence is the ultimate goal for students with disabilities, including secondary students with autism. One avenue targeted for increasing independence and decreasing prompt-dependency is through self-monitoring. In this study, investigators sought to determine whether a difference exists in levels of task independence when three students with…

Upcoming Events

Science.gov Websites

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z D2L PAWS Email My UW-System About UWM UWM Jobs D2L PAWS Email My UW-System University of Wisconsin-Milwaukee College ofEngineering & Olympiad Girls Who Code Club FIRST Tech Challenge NSF I-Corps Site of Southeastern Wisconsin UW-Milwaukee

Obscuration Due to Dust of a Laser Beam in a Gun Firing Environment - Preliminary Survey

DTIC Science & Technology

1975-10-01

34 APG- MT-4371, Nov 1973, Aberdeen Proving Ground , MD (AD Number: 915796L). 13. Engineering Design Handbook, Ballistic Series, "Interior Ballistics of...Technical Library Watervliet, NY 12189 Director Ballistic Research Laboratories Aberdeen Proving Ground , MD 21005 Commander US Army Electronics...RHFL Warren, MI 48090 Commander Aberdeen Proving Ground ATTN: Tech Lib., Bldg 313 Aberdeen Proving Ground , MD 22005 Chief of Naval Research

Mission Impact Through Neuro-Inspired Design (MIND) Laboratory: Design Principles and Performance Characteristics

DTIC Science & Technology

2013-09-01

sprinkler , fire alarm, and mass-notification systems ). Piping required for the sprinkler system uses dielectric couplers at each penetration of the...environment for neuroscience research designed for studying Soldier- system interactions in support of the U.S. Army Research Laboratory’s (ARL’s...Engineers, of Towson, MD, —designed the heating, ventilation, and air conditioning and electrical systems ; Hi-Tech Services, Inc., of Ferndale, WA

NASA/DoD Aerospace Knowledge Diffusion Research Project, Paper Eleven: The Voice of the User-How U.S. Aerospace Engineers and Scientists View DoD Technical Reports

DTIC Science & Technology

1991-05-01

34 (May/June 1981): 331-339. Technical Writing Teacher 4:3 (Spring 1977): 83-88. Monge, Peter R.; James D. Schriner; Bettie F. Farace ; and Dewhirst, H...Dudley; Richard D. Avery; and Edward Richard V. Farace . The Assessment of NASA Tech- M. Brown. "Satisfaction and Performance in Re- nical

Aircraft Nuclear Survivability Methods.

DTIC Science & Technology

1985-09-01

RD-ft63 218 IRCRAFT NUCLER SURVIVBILITY NETHODS(U IR FORCE 1/3 ID ft6 INST O TECH NRIGNT-PATTERSON AFI OH SCHOOL OF ENGINEERING H A UNDEM SEP 05...Approach..............VI.7 A Statistical Model of the Radiated Power ........................VI.7 Thermal Vulnerability Modeling.......VI.20 Melt-Mode...6.3 Thermal Power Versus Time--198 Kilotons at Sea Level ...... . . . .............. VI.12 6.4 Thermal Power Versus Time--3.8 Megatons at Sea Level