Commercialization of microfluidic devices.

PubMed

Volpatti, Lisa R; Yetisen, Ali K

2014-07-01

Microfluidic devices offer automation and high-throughput screening, and operate at low volumes of consumables. Although microfluidics has the potential to reduce turnaround times and costs for analytical devices, particularly in medical, veterinary, and environmental sciences, this enabling technology has had limited diffusion into consumer products. This article analyzes the microfluidics market, identifies issues, and highlights successful commercialization strategies. Addressing niche markets and establishing compatibility with existing workflows will accelerate market penetration. Copyright © 2014 Elsevier Ltd. All rights reserved.

The volume of nipple aspirate fluid is not affected by 6 months of treatment with soy foods in premenopausal women.

PubMed

Maskarinec, Gertraud; Morimoto, Yukiko; Conroy, Shannon M; Pagano, Ian S; Franke, Adrian A

2011-04-01

Based on the hypothesis that soy food consumption may influence breast tissue activity, we examined its effect on the production of nipple aspirate fluid (NAF), a possible indicator of breast cancer risk. Of 310 premenopausal women screened, 112 (36%) produced at least 10 μL of NAF, the minimum for study participation. In a crossover design, we randomized 96 women to 2 groups who, in reverse order, consumed a high-soy diet with 2 soy servings/d (1 serving = 177 mL soy milk, 126 g tofu, or 23 g soy nuts) and a low-soy diet with <3 servings/wk of soy for 6 mo each separated by a 1-mo washout period. During each diet period, 3 NAF samples were obtained (baseline and 3 and 6 mo) using a FirstCyte Aspirator and 4 urine samples (baseline and 1, 3, and 6 mo) were analyzed for isoflavonoids by liquid chromatography tandem MS. Adherence to the study protocol according to 24-h dietary recalls and urinary isoflavonoid excretion was high. The drop-out rate was 15% (n = 14); 82 women completed the intervention. The 2 groups produced similar mean NAF volumes at baseline (P = 0.95) but differed in age and previous soy intake and in their response to the intervention (P = 0.03). In both groups, NAF volume decreased during the first 3 mo of the high-soy diet period and returned to baseline at 6 mo, but there was no effect of the high-soy diet on NAF volume (P = 0.50 for diet; P-interaction = 0.21 for diet with time). Contrary to an earlier report, soy foods in amounts consumed by Asians did not increase breast tissue activity as assessed by NAF volume.

The Volume of Nipple Aspirate Fluid Is Not Affected by 6 Months of Treatment with Soy Foods in Premenopausal Women1234

PubMed Central

Maskarinec, Gertraud; Morimoto, Yukiko; Conroy, Shannon M.; Pagano, Ian S.; Franke, Adrian A.

2011-01-01

Based on the hypothesis that soy food consumption may influence breast tissue activity, we examined its effect on the production of nipple aspirate fluid (NAF), a possible indicator of breast cancer risk. Of 310 premenopausal women screened, 112 (36%) produced at least 10 μL of NAF, the minimum for study participation. In a crossover design, we randomized 96 women to 2 groups who, in reverse order, consumed a high-soy diet with 2 soy servings/d (1 serving = 177 mL soy milk, 126 g tofu, or 23 g soy nuts) and a low-soy diet with <3 servings/wk of soy for 6 mo each separated by a 1-mo washout period. During each diet period, 3 NAF samples were obtained (baseline and 3 and 6 mo) using a FirstCyte Aspirator and 4 urine samples (baseline and 1, 3, and 6 mo) were analyzed for isoflavonoids by liquid chromatography tandem MS. Adherence to the study protocol according to 24-h dietary recalls and urinary isoflavonoid excretion was high. The drop-out rate was 15% (n = 14); 82 women completed the intervention. The 2 groups produced similar mean NAF volumes at baseline (P = 0.95) but differed in age and previous soy intake and in their response to the intervention (P = 0.03). In both groups, NAF volume decreased during the first 3 mo of the high-soy diet period and returned to baseline at 6 mo, but there was no effect of the high-soy diet on NAF volume (P = 0.50 for diet; P-interaction = 0.21 for diet with time). Contrary to an earlier report, soy foods in amounts consumed by Asians did not increase breast tissue activity as assessed by NAF volume. PMID:21325473

Potent cocktails: Effects of phthalate mixtures on reproductive development

EPA Science Inventory

Phthalate diesters are high-production volume chemicals used for many applications in consumer, health, medical and industrial products. Multiple phthalate metabolites have been detected in humans of all ages, including in pregnant mothers' urine and human amniotic fluid. Certain...

Off-road axle detection sensor (ORADS) : research implementation plan.

DOT National Transportation Integrated Search

2001-04-01

To collect various types of traffic data to meet the Federal Requirements, field technicians have to enter : the roadway to anchor the road sensors while traffic is moving at highway speeds. On high volumes : routes this can be a very time consuming ...

The water footprint of humanity

PubMed Central

Hoekstra, Arjen Y.; Mekonnen, Mesfin M.

2012-01-01

This study quantifies and maps the water footprint (WF) of humanity at a high spatial resolution. It reports on consumptive use of rainwater (green WF) and ground and surface water (blue WF) and volumes of water polluted (gray WF). Water footprints are estimated per nation from both a production and consumption perspective. International virtual water flows are estimated based on trade in agricultural and industrial commodities. The global annual average WF in the period 1996–2005 was 9,087 Gm3/y (74% green, 11% blue, 15% gray). Agricultural production contributes 92%. About one-fifth of the global WF relates to production for export. The total volume of international virtual water flows related to trade in agricultural and industrial products was 2,320 Gm3/y (68% green, 13% blue, 19% gray). The WF of the global average consumer was 1,385 m3/y. The average consumer in the United States has a WF of 2,842 m3/y, whereas the average citizens in China and India have WFs of 1,071 and 1,089 m3/y, respectively. Consumption of cereal products gives the largest contribution to the WF of the average consumer (27%), followed by meat (22%) and milk products (7%). The volume and pattern of consumption and the WF per ton of product of the products consumed are the main factors determining the WF of a consumer. The study illustrates the global dimension of water consumption and pollution by showing that several countries heavily rely on foreign water resources and that many countries have significant impacts on water consumption and pollution elsewhere. PMID:22331890

Improving NIR model for the prediction of cotton fiber strength

USDA-ARS?s Scientific Manuscript database

Cotton fiber strength is an important quality characteristic that is directly related to the manufacturing of quality consumer goods. Currently, two types of instruments have been implemented to assess cotton fiber strength, namely, the automation oriented high volume instrument (HVI) and the labora...

Projection display market trends

NASA Astrophysics Data System (ADS)

Mentley, David E.

1997-05-01

The projection display industry is now a multi-billion dollar market comprising an expanding variety of technologies and applications. Growth is being driven by a combination of high volume consumer products and high value business demand. After many years of marginal, but steady performance improvements, essentially all types of projectors have crossed the threshold of acceptability and are now facing accelerated continuing growth. Overall worldwide unit sales of all types of projection displays for all applications will nearly double from 1.6 million units in 1996 to 2.8 million units in 2002. By value at the end user price, the global projector market will grow modestly from 6.3 billion dollars in 1996 to 7.7 billion dollars in 2002. Consumer television will represent the largest share of unit consumption over this time period; in 1996, this application represents 72 percent of the total unit volume. The second major application category for projection displays is the business or presentation projector, representing only 14 percent of the unit shipment total in 1996, but 50 percent of the value.

Autoshaping of ethanol drinking: an animal model of binge drinking.

PubMed

Tomie, Arthur; di Poce, Jason; Derenzo, Christopher C; Pohorecky, Larissa A

2002-01-01

To examine the hypothesis that Pavlovian autoshaping provides an animal learning model of drug abuse, two studies evaluated the induction of ethanol drinking by autoshaping procedures. In Experiment 1, the sipper tube conditioned stimulus (CS) contained saccharin/ethanol solution and was repeatedly paired with food as an unconditioned stimulus (US). The CS-US paired group consumed more of the 0.1% saccharin-6% ethanol solution than did the CS-US random group, revealing that autoshaping conditioned responses (CR) induce ethanol drinking not attributable to pseudo-conditioning. Experiment 2 employed saccharin-fading procedures and showed that the paired vs random group differences in ethanol drinking were maintained, even as the saccharin was eliminated from the solution. The results show that Pavlovian autoshaping procedures induce high volumes of ethanol drinking when the presentation of a sipper tube containing an ethanol solution precedes the response-independent delivery of food. The high volume of ethanol consumed in a brief period of time suggests that Pavlovian autoshaping may be a model of binge drinking.

The effects of sex, age, season and habitat on diet of the red fox Vulpes vulpes in northeastern Poland.

PubMed

Kidawa, Dorota; Kowalczyk, Rafał

2011-07-01

The diet of the red fox Vulpes vulpes was investigated in five regions of northeastern Poland by stomach content analysis of 224 foxes collected from hunters. The red fox is expected to show the opportunistic feeding habits. Our study showed that foxes preyed mainly on wild prey, with strong domination of Microtus rodents, regardless of sex, age, month and habitat. Voles Microtus spp. were found in 73% of stomachs and constituted 47% of food volume consumed. Other food items were ungulate carrion (27% of volume), other mammals (11%), birds (9%), and plant material (4%). Sex- and age-specific differences in dietary diversity were found. Adult males and juvenile foxes had larger food niche breadths than adult females and their diets highly overlapped. Proportion of Microtus voles increased from autumn to late winter. Significant habitat differences between studied regions were found. There was a tendency among foxes to decrease consumption of voles with increasing percentage of forest cover. Based on our findings, red foxes in northeastern Poland can be recognized as a generalist predators, consuming easily accessible and abundant prey. However, high percentage of voles consumed regardless of age, sex, month, or habitats may indicate red fox specialization in preying on Microtus rodents.

Interactive use of online health resources: a comparison of consumer and professional questions

PubMed Central

Demner-Fushman, Dina

2016-01-01

Objective To understand how consumer questions on online resources differ from questions asked by professionals, and how such consumer questions differ across resources. Materials and Methods Ten online question corpora, 5 consumer and 5 professional, with a combined total of over 40 000 questions, were analyzed using a variety of natural language processing techniques. These techniques analyze questions at the lexical, syntactic, and semantic levels, exposing differences in both form and content. Results Consumer questions tend to be longer than professional questions, more closely resemble open-domain language, and focus far more on medical problems. Consumers ask more sub-questions, provide far more background information, and ask different types of questions than professionals. Furthermore, there is substantial variance of these factors between the different consumer corpora. Discussion The form of consumer questions is highly dependent upon the individual online resource, especially in the amount of background information provided. Professionals, on the other hand, provide very little background information and often ask much shorter questions. The content of consumer questions is also highly dependent upon the resource. While professional questions commonly discuss treatments and tests, consumer questions focus disproportionately on symptoms and diseases. Further, consumers place far more emphasis on certain types of health problems (eg, sexual health). Conclusion Websites for consumers to submit health questions are a popular online resource filling important gaps in consumer health information. By analyzing how consumers write questions on these resources, we can better understand these gaps and create solutions for improving information access. This article is part of the Special Focus on Person-Generated Health and Wellness Data, which published in the May 2016 issue, Volume 23, Issue 3. PMID:27147494

Retro-Nasal Aroma Release Is Correlated with Variations in the In-Mouth Air Cavity Volume after Empty Deglutition

PubMed Central

Mishellany-Dutour, Anne; Woda, Alain; Labouré, Hélène; Bourdiol, Pierre; Lachaze, Pauline; Guichard, Elisabeth; Feron, Gilles

2012-01-01

We hypothesized that interindividual differences in motor activities during chewing and/or swallowing were determining factors for the transfer of volatile aroma from the in-mouth air cavity (IMAC) toward the olfactory mucosa. In our first experiment, we looked for changes in IMAC volume after saliva deglutition in 12 healthy subjects. The mean IMAC volume was measured after empty deglutition using an acoustic pharyngometer device. Based on the time course of the IMAC volume after swallowing, we discerned two groups of subjects. The first group displayed a small, constant IMAC volume (2.26 mL ±0.62) that corresponded to a high tongue position. The second group displayed a progressive increase in IMAC (from 6.82 mL ±2.37 to 22.82 mL ±3.04) that corresponded to a progressive lowering of the tongue to its resting position. In our second experiment, we investigated the relationship between IMAC volume changes after deglutition and the level of aroma release at the nostril. For this purpose, the release of menthone was measured at the nostril level in 25 subjects who consumed similar amounts of a mint tablet. The subjects were separated into two groups corresponding to two levels of menthone release: high (H) and low (L). The mean volume of IMAC was measured during and after empty deglutition. Group H displayed a small, constant amplitude of IMAC volume change after deglutition, while Group L displayed a progressive increase in IMAC. It is likely that Group H continuously released the aroma through the veloglossal isthmus as the mint was consumed, while Group L trapped the aroma in the oral cavity and then released it into the nasal cavity upon swallowing. These results show that the in vivo aroma release profile in humans depends closely on the different motor patterns at work during empty deglutition. PMID:22815986

Utilizing off-the-shelf parts for the next generation of space exploration

NASA Technical Reports Server (NTRS)

Stosic, D. K.; Hatch, W. A.; Lux, J. P.; McMaster, R. L.

2001-01-01

Unscreened commercial, off-the-shelf (COTS) parts, in space applications are especially encouraging when the possibility of capitalizing on the extensive development for high-volume consumer applications is considered. Other applications for MMIC parts in space could possibly open new doors in the future.

Consumer Behavior and Greenhouse Gas Emissions at the University of Rhode Island

DOT National Transportation Integrated Search

2009-12-31

Of the 16,000 students at the University of Rhode Island, about 55% percent commute to campus. Between students, staff and faculty there could be up to 11,000 commuters at the University, most of which drive alone. A high volume of single-occupancy v...

A Sustainable Alternative to a Breast Milk Monitoring Program: Using NHANES Serum Data to Estimate Breast Milk PBDE Concentrations

EPA Science Inventory

Polybrominated diphenyl ethers (PBDEs) are high-production-volume chemicals that have been widely used as flame retardants in a variety of consumer products. PBDE concentrations in the environment, wildlife, and humans have been increasing for several decades. Concentrations in t...

Novel Liquid Sorbent C02 Removal System for Microgravity Applications

NASA Technical Reports Server (NTRS)

Rogers, Tanya; Westover, Shayne; Graf, John

2017-01-01

Removing Carbon Dioxide (CO2) from a spacecraft environment for deep space exploration requires a robust system that is low in weight, power, and volume. Current state-of-the-art microgravity compatible CO2 removal systems, such as the carbon dioxide removal assembly (CDRA), utilize solid sorbents that demand high power usage due to high desorption temperatures and a large volume to accommodate for their comparatively low capacity for CO2. Additionally, solid sorbent systems contain several mechanical components that significantly reduce reliability and contribute to a large overall mass. A liquid sorbent based system has been evaluated as an alternative is proposed to consume 65% less power, weight, and volume than solid based CO2 scrubbers. This paper presents the design of a liquid sorbent CO2 removal system for microgravity applications.

Monitoring service for the Gran Telescopio Canarias control system

NASA Astrophysics Data System (ADS)

Huertas, Manuel; Molgo, Jordi; Macías, Rosa; Ramos, Francisco

2016-07-01

The Monitoring Service collects, persists and propagates the Telescope and Instrument telemetry, for the Gran Telescopio CANARIAS (GTC), an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). A new version of the Monitoring Service has been developed in order to improve performance, provide high availability, guarantee fault tolerance and scalability to cope with high volume of data. The architecture is based on a distributed in-memory data store with a Product/Consumer pattern design. The producer generates the data samples. The consumers either persists the samples to a database for further analysis or propagates them to the consoles in the control room to monitorize the state of the whole system.

Electronic manufacturing and packaging in Japan

NASA Technical Reports Server (NTRS)

Kelly, Michael J.; Boulton, William R. (Editor); Kukowski, John A.; Meieran, Eugene S.; Pecht, Michael; Peeples, John W.; Tummala, Rao R.

1995-01-01

This report summarizes the status of electronic manufacturing and packaging technology in Japan in comparison to that in the United States, and its impact on competition in electronic manufacturing in general. In addition to electronic manufacturing technologies, the report covers technology and manufacturing infrastructure, electronics manufacturing and assembly, quality assurance and reliability in the Japanese electronics industry, and successful product realization strategies. The panel found that Japan leads the United States in almost every electronics packaging technology. Japan clearly has achieved a strategic advantage in electronics production and process technologies. Panel members believe that Japanese competitors could be leading U.S. firms by as much as a decade in some electronics process technologies. Japan has established this marked competitive advantage in electronics as a consequence of developing low-cost, high-volume consumer products. Japan's infrastructure, and the remarkable cohesiveness of vision and purpose in government and industry, are key factors in the success of Japan's electronics industry. Although Japan will continue to dominate consumer electronics in the foreseeable future, opportunities exist for the United States and other industrial countries to capture an increasingly large part of the market. The JTEC panel has identified no insurmountable barriers that would prevent the United States from regaining a significant share of the consumer electronics market; in fact, there is ample evidence that the United States needs to aggressively pursue high-volume, low-cost electronic assembly, because it is a critical path leading to high-performance electronic systems.

Functional requirements for onboard management of space shuttle consumables, volume 1

NASA Technical Reports Server (NTRS)

Graf, P. J.; Herwig, H. A.; Neel, L. W.

1973-01-01

A study was conducted to determine the functional requirements for onboard management of space shuttle consumables. A generalized consumable management concept was developed for application to advanced spacecraft. The subsystems and related consumables selected for inclusion in the consumables management system are: (1) propulsion, (2) power generation, and (3) environmental and life support.

Formulation of detailed consumables management models for the development (preoperational) period of advanced space transportation system. Volume 3: Study of constraints/limitations for STS consumables management

NASA Technical Reports Server (NTRS)

Newman, C. M.

1976-01-01

The constraints and limitations for STS Consumables Management are studied. Variables imposing constraints on the consumables related subsystems are identified, and a method determining constraint violations with the simplified consumables model in the Mission Planning Processor is presented.

Open-source Software for Demand Forecasting of Clinical Laboratory Test Volumes Using Time-series Analysis.

PubMed

Mohammed, Emad A; Naugler, Christopher

2017-01-01

Demand forecasting is the area of predictive analytics devoted to predicting future volumes of services or consumables. Fair understanding and estimation of how demand will vary facilitates the optimal utilization of resources. In a medical laboratory, accurate forecasting of future demand, that is, test volumes, can increase efficiency and facilitate long-term laboratory planning. Importantly, in an era of utilization management initiatives, accurately predicted volumes compared to the realized test volumes can form a precise way to evaluate utilization management initiatives. Laboratory test volumes are often highly amenable to forecasting by time-series models; however, the statistical software needed to do this is generally either expensive or highly technical. In this paper, we describe an open-source web-based software tool for time-series forecasting and explain how to use it as a demand forecasting tool in clinical laboratories to estimate test volumes. This tool has three different models, that is, Holt-Winters multiplicative, Holt-Winters additive, and simple linear regression. Moreover, these models are ranked and the best one is highlighted. This tool will allow anyone with historic test volume data to model future demand.

Open-source Software for Demand Forecasting of Clinical Laboratory Test Volumes Using Time-series Analysis

PubMed Central

Mohammed, Emad A.; Naugler, Christopher

2017-01-01

Background: Demand forecasting is the area of predictive analytics devoted to predicting future volumes of services or consumables. Fair understanding and estimation of how demand will vary facilitates the optimal utilization of resources. In a medical laboratory, accurate forecasting of future demand, that is, test volumes, can increase efficiency and facilitate long-term laboratory planning. Importantly, in an era of utilization management initiatives, accurately predicted volumes compared to the realized test volumes can form a precise way to evaluate utilization management initiatives. Laboratory test volumes are often highly amenable to forecasting by time-series models; however, the statistical software needed to do this is generally either expensive or highly technical. Method: In this paper, we describe an open-source web-based software tool for time-series forecasting and explain how to use it as a demand forecasting tool in clinical laboratories to estimate test volumes. Results: This tool has three different models, that is, Holt-Winters multiplicative, Holt-Winters additive, and simple linear regression. Moreover, these models are ranked and the best one is highlighted. Conclusion: This tool will allow anyone with historic test volume data to model future demand. PMID:28400996

Techniques for efficient, real-time, 3D visualization of multi-modality cardiac data using consumer graphics hardware.

PubMed

Levin, David; Aladl, Usaf; Germano, Guido; Slomka, Piotr

2005-09-01

We exploit consumer graphics hardware to perform real-time processing and visualization of high-resolution, 4D cardiac data. We have implemented real-time, realistic volume rendering, interactive 4D motion segmentation of cardiac data, visualization of multi-modality cardiac data and 3D display of multiple series cardiac MRI. We show that an ATI Radeon 9700 Pro can render a 512x512x128 cardiac Computed Tomography (CT) study at 0.9 to 60 frames per second (fps) depending on rendering parameters and that 4D motion based segmentation can be performed in real-time. We conclude that real-time rendering and processing of cardiac data can be implemented on consumer graphics cards.

77 FR 35299 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-13

... require the use of heat pump technology to meet the minimum standard for electric storage water heaters... recently amended energy conservation standards for residential electric water heaters on utility programs that use high-storage-volume (above 55 gallons) electric storage water heaters to reduce peak...

A Sustainable Alternative to a U.S. Breast Milk Monitoring Program: Using NHANES Serum Data to Estimate Breast Milk PBDE Concentrations

EPA Science Inventory

Polybrominated diphenyl ethers (PBDEs) are high-production-volume chemicals that have been widely used as flame retardants in a variety of consumer products. PBDE concentrations in the environment, wildlife, and humans have been increasing for several decades. Concentrations in t...

Comparison of fetal testosterone production in various tissues of the male sprague dawley rat dosed in utero with dipentyl phthalate during the critical window of sexual differentiation

EPA Science Inventory

Phthalate esters are high-production volume chemicals used in the manufacture of numerous plastics and consumer products, which generates major concern for potential human exposure and environmental contamination. Several studies have demonstrated adverse effects associated with ...

Complex VLSI Feature Comparison for Commercial Microelectronics Verification

DTIC Science & Technology

2014-03-27

69 4.2.4 Circuit E . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 4.3 Summary...used for high-performance consumer microelectronics. Volume is a significant factor in constraining the technology limit for defense circuits, but it...surveyed in a 2010 Department of Commerce report found counterfeit chips difficult to identify due to improved fabrication quality in overseas counterfeit

Dermal uptake of three brominated phenols: tetrabromobisphenol A (TBBPA), tetrabromobisphenol A bis(2,3-dibromopropyl ether) (TBBPA-BDBPE), and 2,4,6-tribromophenol (TBP).

EPA Science Inventory

Three brominated phenols, TBBPA, TBBPA-BDBPE, and TBP, were assayed to determine dermal absorption and penetrance. All three chemicals are high production volume brominated flame retardants (BFR) used in consumer products, resulting in ubiquitous human exposure. TBBPA, a reactive...

A CASE STUDY ON THE RISKS AND BENEFITS OF DECABDE, A MAJOR BROMINATED FLAME RETARDANT

EPA Science Inventory

This is a proposal for a roundtable presentation at the 2008 Society of Toxicology Annual Meeting. ABSTRACT BODY: Decabromodiphenyl ether (DecaBDE) is a high production volume chemical used as a flame retardant in a variety of consumer applications; examples of uses in h...

40 CFR 80.1501 - What are the labeling requirements that apply to retailers and wholesale purchaser-consumers of...

Code of Federal Regulations, 2012 CFR

2012-07-01

... that apply to retailers and wholesale purchaser-consumers of gasoline-ethanol blends that contain greater than 10.0 volume percent ethanol and not more than 15.0 volume percent ethanol? 80.1501 Section 80...) REGULATION OF FUELS AND FUEL ADDITIVES Additional Requirements for Gasoline-Ethanol Blends § 80.1501 What are...

40 CFR 80.1501 - What are the labeling requirements that apply to retailers and wholesale purchaser-consumers of...

Code of Federal Regulations, 2013 CFR

2013-07-01

... that apply to retailers and wholesale purchaser-consumers of gasoline-ethanol blends that contain greater than 10.0 volume percent ethanol and not more than 15.0 volume percent ethanol? 80.1501 Section 80...) REGULATION OF FUELS AND FUEL ADDITIVES Additional Requirements for Gasoline-Ethanol Blends § 80.1501 What are...

40 CFR 80.1501 - What are the labeling requirements that apply to retailers and wholesale purchaser-consumers of...

Code of Federal Regulations, 2014 CFR

2014-07-01

... that apply to retailers and wholesale purchaser-consumers of gasoline-ethanol blends that contain greater than 10.0 volume percent ethanol and not more than 15.0 volume percent ethanol? 80.1501 Section 80...) REGULATION OF FUELS AND FUEL ADDITIVES Additional Requirements for Gasoline-Ethanol Blends § 80.1501 What are...

Piscivorous fish exhibit temperature-influenced binge feeding during an annual prey pulse.

PubMed

Furey, Nathan B; Hinch, Scott G; Mesa, Matthew G; Beauchamp, David A

2016-09-01

Understanding the limits of consumption is important for determining trophic influences on ecosystems and predator adaptations to inconsistent prey availability. Fishes have been observed to consume beyond what is sustainable (i.e. digested on a daily basis), but this phenomenon of hyperphagia (or binge-feeding) is largely overlooked. We expect hyperphagia to be a short-term (1-day) event that is facilitated by gut volume providing capacity to store consumed food during periods of high prey availability to be later digested. We define how temperature, body size and food availability influence the degree of binge-feeding by comparing field observations with laboratory experiments of bull trout (Salvelinus confluentus), a large freshwater piscivore that experiences highly variable prey pulses. We also simulated bull trout consumption and growth during salmon smolt outmigrations under two scenarios: 1) daily consumption being dependent upon bioenergetically sustainable rates and 2) daily consumption being dependent upon available gut volume (i.e. consumption is equal to gut volume when empty and otherwise 'topping off' based on sustainable digestion rates). One-day consumption by laboratory-held bull trout during the first day of feeding experiments after fasting exceeded bioenergetically sustainable rates by 12- to 87-fold at low temperatures (3 °C) and by  ˜1·3-fold at 20 °C. The degree of binge-feeding by bull trout in the field was slightly reduced but largely in agreement with laboratory estimates, especially when prey availability was extremely high [during a sockeye salmon (Oncorhynchus nerka) smolt outmigration and at a counting fence where smolts are funnelled into high densities]. Consumption by bull trout at other settings were lower and more variable, but still regularly hyperphagic. Simulations demonstrated the ability to binge-feed increased cumulative consumption (16-32%) and cumulative growth (19-110%) relative to only feeding at bioenergetically sustainable rates during the  ˜1-month smolt outmigration period. Our results indicate the ability for predators to maximize short-term consumption when prey are available can be extreme and is limited primarily by gut volume, then mediated by temperature; thus, predator-prey relationships may be more dependent upon prey availability than traditional bioenergetic models suggest. Binge-feeding has important implications for energy budgets of consumers as well as acute predation impacts on prey. © 2016 The Authors. Journal of Animal Ecology © 2016 British Ecological Society.

Piscivorous fish exhibit temperature-influenced binge feeding during an annual prey pulse

USGS Publications Warehouse

Furey, Nathan B.; Hinch, Scott G.; Mesa, Matthew G.; Beauchamp, David A.

2016-01-01

Understanding the limits of consumption is important for determining trophic influences on ecosystems and predator adaptations to inconsistent prey availability. Fishes have been observed to consume beyond what is sustainable (i.e. digested on a daily basis), but this phenomenon of hyperphagia (or binge-feeding) is largely overlooked. We expect hyperphagia to be a short-term (1-day) event that is facilitated by gut volume providing capacity to store consumed food during periods of high prey availability to be later digested.We define how temperature, body size and food availability influence the degree of binge-feeding by comparing field observations with laboratory experiments of bull trout (Salvelinus confluentus), a large freshwater piscivore that experiences highly variable prey pulses. We also simulated bull trout consumption and growth during salmon smolt outmigrations under two scenarios: 1) daily consumption being dependent upon bioenergetically sustainable rates and 2) daily consumption being dependent upon available gut volume (i.e. consumption is equal to gut volume when empty and otherwise ‘topping off’ based on sustainable digestion rates).One-day consumption by laboratory-held bull trout during the first day of feeding experiments after fasting exceeded bioenergetically sustainable rates by 12- to 87-fold at low temperatures (3 °C) and by  ˜1·3-fold at 20 °C. The degree of binge-feeding by bull trout in the field was slightly reduced but largely in agreement with laboratory estimates, especially when prey availability was extremely high [during a sockeye salmon (Oncorhynchus nerka) smolt outmigration and at a counting fence where smolts are funnelled into high densities]. Consumption by bull trout at other settings were lower and more variable, but still regularly hyperphagic.Simulations demonstrated the ability to binge-feed increased cumulative consumption (16–32%) and cumulative growth (19–110%) relative to only feeding at bioenergetically sustainable rates during the  ˜1-month smolt outmigration period.Our results indicate the ability for predators to maximize short-term consumption when prey are available can be extreme and is limited primarily by gut volume, then mediated by temperature; thus, predator–prey relationships may be more dependent upon prey availability than traditional bioenergetic models suggest. Binge-feeding has important implications for energy budgets of consumers as well as acute predation impacts on prey.

Differences in energy expenditure during high-speed versus standard-speed yoga: A randomized sequence crossover trial.

PubMed

Potiaumpai, Melanie; Martins, Maria Carolina Massoni; Rodriguez, Roberto; Mooney, Kiersten; Signorile, Joseph F

2016-12-01

To compare energy expenditure and volume of oxygen consumption and carbon dioxide production during a high-speed yoga and a standard-speed yoga program. Randomized repeated measures controlled trial. A laboratory of neuromuscular research and active aging. Sun-Salutation B was performed, for eight minutes, at a high speed versus and a standard-speed separately while oxygen consumption was recorded. Caloric expenditure was calculated using volume of oxygen consumption and carbon dioxide production. Difference in energy expenditure (kcal) of HSY and SSY. Significant differences were observed in energy expenditure between yoga speeds with high-speed yoga producing significantly higher energy expenditure than standard-speed yoga (MD=18.55, SE=1.86, p<0.01). Significant differences were also seen between high-speed and standard-speed yoga for volume of oxygen consumed and carbon dioxide produced. High-speed yoga results in a significantly greater caloric expenditure than standard-speed yoga. High-speed yoga may be an effective alternative program for those targeting cardiometabolic markers. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of computerized stocktaking system in mine surveying for ore mineral volume calculation in covered storehouses

NASA Astrophysics Data System (ADS)

Valdman, V. V.; Gridnev, S. O.

2017-10-01

The article examines into the vital issues of measuring and calculating the raw stock volumes in covered storehouses at mining and processing plants. The authors bring out two state-of-the-art high-technology solutions: 1 - to use the ground-based laser scanning system (the method is reasonably accurate and dependable, but costly and time consuming; it also requires the stoppage of works in the storehouse); 2 - to use the fundamentally new computerized stocktaking system in mine surveying for the ore mineral volume calculation, based on the profile digital images. These images are obtained via vertical projection of the laser plane onto the surface of the stored raw materials.

Application of Raman spectroscopy to identification and sorting of post-consumer plastics for recycling

DOEpatents

Sommer, Edward J.; Rich, John T.

2001-01-01

A high accuracy rapid system for sorting a plurality of waste products by polymer type. The invention involves the application of Raman spectroscopy and complex identification techniques to identify and sort post-consumer plastics for recycling. The invention reads information unique to the molecular structure of the materials to be sorted to identify their chemical compositions and uses rapid high volume sorting techniques to sort them into product streams at commercially viable throughput rates. The system employs a laser diode (20) for irradiating the material sample (10), a spectrograph (50) is used to determine the Raman spectrum of the material sample (10) and a microprocessor based controller (70) is employed to identify the polymer type of the material sample (10).

Interactive use of online health resources: a comparison of consumer and professional questions.

PubMed

Roberts, Kirk; Demner-Fushman, Dina

2016-07-01

To understand how consumer questions on online resources differ from questions asked by professionals, and how such consumer questions differ across resources. Ten online question corpora, 5 consumer and 5 professional, with a combined total of over 40 000 questions, were analyzed using a variety of natural language processing techniques. These techniques analyze questions at the lexical, syntactic, and semantic levels, exposing differences in both form and content. Consumer questions tend to be longer than professional questions, more closely resemble open-domain language, and focus far more on medical problems. Consumers ask more sub-questions, provide far more background information, and ask different types of questions than professionals. Furthermore, there is substantial variance of these factors between the different consumer corpora. The form of consumer questions is highly dependent upon the individual online resource, especially in the amount of background information provided. Professionals, on the other hand, provide very little background information and often ask much shorter questions. The content of consumer questions is also highly dependent upon the resource. While professional questions commonly discuss treatments and tests, consumer questions focus disproportionately on symptoms and diseases. Further, consumers place far more emphasis on certain types of health problems (eg, sexual health). Websites for consumers to submit health questions are a popular online resource filling important gaps in consumer health information. By analyzing how consumers write questions on these resources, we can better understand these gaps and create solutions for improving information access.This article is part of the Special Focus on Person-Generated Health and Wellness Data, which published in the May 2016 issue, Volume 23, Issue 3. Published by Oxford University Press on behalf of the American Medical Informatics Association 2016. This work is written by US Government employees and is in the public domain in the United States.

Consumer Interests Annual. Volume 41. American Council on Consumer Interests Annual Conference (41st, Washington, D.C., March 15-18, 1995).

ERIC Educational Resources Information Center

Folk, Karen F., Ed.

This proceedings contains the texts of 5 invited papers and 28 refereed papers. The following are among the papers included: "Consumer Interest in the 1990's and Beyond" (Turner); "Esther Peterson and the Consumer Movement" (Galbraith); "The Public's Right to Government Information" (English); "Partnerships in…

UV / Visible / Near-Infrared Reflectance Models for the Rapid and Non-Destructive Prediction and Classification of Cotton Color and Physical Indices

USDA-ARS?s Scientific Manuscript database

High volume instrumentation (HVI), utilized in the cotton industry to determine the qualities and classifications of cotton fibers, is time consuming, and prone to day-to-day and location-to-location variations. UV / visible / NIR spectroscopy, a rapid and easy sampling technique, was investigated a...

Comparison of Fetal Testosterone Production in Various Tissues of the Male Sprague Dawley Rat dosed In Utero with Dipentyl Phthalate during the Critical Window of Sexual Differentiation###

EPA Science Inventory

Phthalate esters are high-production volume chemicals used in the manufacture of numerci plastics and consumer products, which generates major concern for potential human exposure and environmental contamination. Several studies have demonstrated adverse effects associated with p...

Enhanced FIB-SEM systems for large-volume 3D imaging.

PubMed

Xu, C Shan; Hayworth, Kenneth J; Lu, Zhiyuan; Grob, Patricia; Hassan, Ahmed M; García-Cerdán, José G; Niyogi, Krishna K; Nogales, Eva; Weinberg, Richard J; Hess, Harald F

2017-05-13

Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) can automatically generate 3D images with superior z-axis resolution, yielding data that needs minimal image registration and related post-processing. Obstacles blocking wider adoption of FIB-SEM include slow imaging speed and lack of long-term system stability, which caps the maximum possible acquisition volume. Here, we present techniques that accelerate image acquisition while greatly improving FIB-SEM reliability, allowing the system to operate for months and generating continuously imaged volumes > 10 6 µm 3 . These volumes are large enough for connectomics, where the excellent z resolution can help in tracing of small neuronal processes and accelerate the tedious and time-consuming human proofreading effort. Even higher resolution can be achieved on smaller volumes. We present example data sets from mammalian neural tissue, Drosophila brain, and Chlamydomonas reinhardtii to illustrate the power of this novel high-resolution technique to address questions in both connectomics and cell biology.

Dual use application of killer app FHE products for Mil/Aero

NASA Astrophysics Data System (ADS)

Hackler, R. Douglas

2016-05-01

The flexible electronics industry has adopted flexible hybrid electronic (FHE) systems as a go to market strategy. High volume products are emerging for body worn bio patches, conformal structural appliques and smart labels. These products were principally developed for volume consumer and industrial market solutions but are directly applicable to advanced defense systems. This article highlights the state of the art for bio patch, conformal and smart FHE products and identifies their dual use capability for defense systems. A discussion of the manufacturing base for FHE products is presented and current experimental prototype results and performance are shared.

Market trends in the projection display industry

NASA Astrophysics Data System (ADS)

Dash, Sweta

2000-04-01

The projection display industry represents a multibillion- dollar market that includes four distinct technologies. High-volume consumer products and high-value business products drive the market, with different technologies being used in different application markets. The consumer market is dominated by rear CRT technology, especially in the projection television segment. But rear LCD (liquid crystal display) and rear reflective (DLP, or Digital Light ProcessingTM) televisions are slowly emerging as future competitors to rear CRT projectors. Front CRT projectors are still popular in the high-end home theater market. Front LCD technology and front DLP technology dominate the business market. Traditional light valve technology was the only solution for applications requiring high light outputs, but new three-chip DLP projectors meet the higher light output requirements at a lower price. In the last few years the strongest growth has been in the business market for multimedia presentation applications. This growth was due to the continued increase in display pixel formats, the continued reduction in projector weight, and the improved price/performance ratio. The projection display market will grow at a significant rate during the next five years, driven by the growth in ultraportable (< 10 pound) projectors and the shift in the consumer market to digital and HDTV products.

High-throughput Titration of Luciferase-expressing Recombinant Viruses

PubMed Central

Garcia, Vanessa; Krishnan, Ramya; Davis, Colin; Batenchuk, Cory; Le Boeuf, Fabrice; Abdelbary, Hesham; Diallo, Jean-Simon

2014-01-01

Standard plaque assays to determine infectious viral titers can be time consuming, are not amenable to a high volume of samples, and cannot be done with viruses that do not form plaques. As an alternative to plaque assays, we have developed a high-throughput titration method that allows for the simultaneous titration of a high volume of samples in a single day. This approach involves infection of the samples with a Firefly luciferase tagged virus, transfer of the infected samples onto an appropriate permissive cell line, subsequent addition of luciferin, reading of plates in order to obtain luminescence readings, and finally the conversion from luminescence to viral titers. The assessment of cytotoxicity using a metabolic viability dye can be easily incorporated in the workflow in parallel and provide valuable information in the context of a drug screen. This technique provides a reliable, high-throughput method to determine viral titers as an alternative to a standard plaque assay. PMID:25285536

A study of the effectiveness and energy efficiency of ultrasonic emulsification.

PubMed

Li, Wu; Leong, Thomas S H; Ashokkumar, Muthupandian; Martin, Gregory J O

2017-12-20

Three essential experimental parameters in the ultrasonic emulsification process, namely sonication time, acoustic amplitude and processing volume, were individually investigated, theoretically and experimentally, and correlated to the emulsion droplet sizes produced. The results showed that with a decrease in droplet size, two kinetic regions can be separately correlated prior to reaching a steady state droplet size: a fast size reduction region and a steady state transition region. In the fast size reduction region, the power input and sonication time could be correlated to the volume-mean diameter by a power-law relationship, with separate power-law indices of -1.4 and -1.1, respectively. A proportional relationship was found between droplet size and processing volume. The effectiveness and energy efficiency of droplet size reduction was compared between ultrasound and high-pressure homogenisation (HPH) based on both the effective power delivered to the emulsion and the total electric power consumed. Sonication could produce emulsions across a broad range of sizes, while high-pressure homogenisation was able to produce emulsions at the smaller end of the range. For ultrasonication, the energy efficiency was higher at increased power inputs due to more effective droplet breakage at high ultrasound intensities. For HPH the consumed energy efficiency was improved by operating at higher pressures for fewer passes. At the laboratory scale, the ultrasound system required less electrical power than HPH to produce an emulsion of comparable droplet size. The energy efficiency of HPH is greatly improved at large scale, which may also be true for larger scale ultrasonic reactors.

Variability of bisphenol-A concentrations in first morning, bedtime, and 24-hour urine samples in 50 North Carolina adults over a six-week period

EPA Science Inventory

Bisphenol-A (BPA) is a high-production volume chemical that is used to make a number of consumer products and packaged goods. Many cross-sectional studies have frequently reported detecting BPA in urine. However, limited data exist on the temporal variability of urinary BPA conce...

Internet Protocol Handbook. Volume 4. The Domain Name System (DNS) handbook

DTIC Science & Technology

1989-08-01

Mockapetris [Page 1] 4-11 INTERNET PROTOCOL HA TDBOOK - Voue Four 1989 RFC 1034 Domain Concepts and Facilities November 1987 bandwidth consumed in distributing...Domain Names- Concepts and Facilities KFC 1034 RFC 1034 Domain Concepts and Facilities November 1’)87 - Queries contain a bit called recursion desired...during periodic sweeps to reclaim the memory consumed by old RRS. Mockapetris [Page 33] 4-43 INTERNET PROTOCOL HANDBOOK - Volume Four 1989 RFC 1034

GASP- General Aviation Synthesis Program. Volume 7: Economics

NASA Technical Reports Server (NTRS)

1978-01-01

The economic analysis includes: manufacturing costs; labor costs; parts costs; operating costs; markups and consumer price. A user's manual for a computer program to calculate the final consumer price is included.

An assessment of data and methodology of online surgeon scorecards.

PubMed

Xu, Linda W; Li, Amy; Swinney, Christian; Babu, Maya; Veeravagu, Anand; Wolfe, Stacey Quintero; Nahed, Brian V; Ratliff, John K

2017-02-01

OBJECTIVE Recently, 2 surgeon rating websites (Consumers' Checkbook and ProPublica) were published to allow the public to compare surgeons through identifying surgeon volume and complication rates. Among neurosurgeons and orthopedic surgeons, only cervical and lumbar spine, hip, and knee procedures were included in this assessment. METHODS The authors examined the methodology of each website to assess potential sources of inaccuracy. Each online tool was queried for reports on neurosurgeons specializing in spine surgery and orthopedic surgeons specializing in spine, hip, or knee surgery. Surgeons were chosen from top-ranked hospitals in the US, as recorded by a national consumer publication ranking system, within the fields of neurosurgery and orthopedic surgery. The results were compared for accuracy and surgeon representation, and the results of the 2 websites were also compared. RESULTS The methodology of each site was found to have opportunities for bias and limited risk adjustment. The end points assessed by each site were actually not complications, but proxies of complication occurrence. A search of 510 surgeons (401 orthopedic surgeons [79%] and 109 neurosurgeons [21%]) showed that only 28% and 56% of surgeons had data represented on Consumers' Checkbook and ProPublica, respectively. There was a significantly higher chance of finding surgeon data on ProPublica (p < 0.001). Of the surgeons from top-ranked programs with data available, 17% were quoted to have high complication rates, 13% with lower volume than other surgeons, and 79% had a 3-star out of 5-star rating. There was no significant correlation found between the number of stars a surgeon received on Consumers' Checkbook and his or her adjusted complication rate on ProPublica. CONCLUSIONS Both the Consumers' Checkbook and ProPublica websites have significant methodological issues. Neither site assessed complication occurrence, but rather readmissions or prolonged length of stay. Risk adjustment was limited or nonexistent. A substantial number of neurosurgeons and orthopedic surgeons from top-ranked hospitals have no ratings on either site, or have data that suggests they are low-volume surgeons or have higher complication rates. Consumers' Checkbook and ProPublica produced different results with little correlation between the 2 websites in how surgeons were graded. Given the significant methodological issues, incomplete data, and lack of appropriate risk stratification of patients, the featured websites may provide erroneous information to the public.

15 CFR 10.6 - Procedures for acceptance of a recommended standard.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., divided by three. No consideration will be given to volume of production or volume of distribution in... who use or consume the product covered by the standard. (8) “Acceptance by volume of production” means.... The weighting of each response will be made in accordance with the volume of production represented by...

Smokes and Obscurants: A Guidebook of Environmental Assessment. Volume 1. Method of Assessment and Appended Data

DTIC Science & Technology

1987-09-04

phytoplankton (microscopic, free-floating algae ), periphyton (microscopic algae that grow attached to rocks or other material), or pigmented bacteria that can...spontaneously with air when released from munitions. Consequently, white phosphorus is often combined with other materials that slow down smoke propagation . A...consumers, typically benthic crganisms (bottom-dwellers, such as mud worms and clams), which consume the primary consumers; and tertiary consumers

Towards an Optimized Method of Olive Tree Crown Volume Measurement

PubMed Central

Miranda-Fuentes, Antonio; Llorens, Jordi; Gamarra-Diezma, Juan L.; Gil-Ribes, Jesús A.; Gil, Emilio

2015-01-01

Accurate crown characterization of large isolated olive trees is vital for adjusting spray doses in three-dimensional crop agriculture. Among the many methodologies available, laser sensors have proved to be the most reliable and accurate. However, their operation is time consuming and requires specialist knowledge and so a simpler crown characterization method is required. To this end, three methods were evaluated and compared with LiDAR measurements to determine their accuracy: Vertical Crown Projected Area method (VCPA), Ellipsoid Volume method (VE) and Tree Silhouette Volume method (VTS). Trials were performed in three different kinds of olive tree plantations: intensive, adapted one-trunked traditional and traditional. In total, 55 trees were characterized. Results show that all three methods are appropriate to estimate the crown volume, reaching high coefficients of determination: R2 = 0.783, 0.843 and 0.824 for VCPA, VE and VTS, respectively. However, discrepancies arise when evaluating tree plantations separately, especially for traditional trees. Here, correlations between LiDAR volume and other parameters showed that the Mean Vector calculated for VCPA method showed the highest correlation for traditional trees, thus its use in traditional plantations is highly recommended. PMID:25658396

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xu, C. Shan; Hayworth, Kenneth J.; Lu, Zhiyuan

Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) can automatically generate 3D images with superior z-axis resolution, yielding data that needs minimal image registration and related post-processing. Obstacles blocking wider adoption of FIB-SEM include slow imaging speed and lack of long-term system stability, which caps the maximum possible acquisition volume. Here, we present techniques that accelerate image acquisition while greatly improving FIB-SEM reliability, allowing the system to operate for months and generating continuously imaged volumes > 10 6 ?m 3 . These volumes are large enough for connectomics, where the excellent z resolution can help in tracing of small neuronal processesmore » and accelerate the tedious and time-consuming human proofreading effort. Even higher resolution can be achieved on smaller volumes. We present example data sets from mammalian neural tissue, Drosophila brain, and Chlamydomonas reinhardtii to illustrate the power of this novel high-resolution technique to address questions in both connectomics and cell biology.« less

Incorporation of air into a snack food reduces energy intake.

PubMed

Osterholt, Kathrin M; Roe, Liane S; Rolls, Barbara J

2007-05-01

This study investigated how the air content of a familiar snack food affected energy intake and whether varying the method of serving the snack modified intake. We tested two versions of an extruded snack (cheese puffs) that were equal in energy density (5.7 kcal/g), but differed in energy per volume (less-aerated snack: 1.00 kcal/ml; more-aerated snack: 0.45 kcal/ml). In a within-subjects design, 16 women and 12 men consumed the snacks ad libitum in the laboratory during four afternoon sessions. A standard volume (1250 ml) of each snack was served once in a bowl and once in an opaque bag. Results showed significant differences in intake of the two snacks by energy (p=0.0003) and volume (p<0.0001); subjects consumed 21% less weight and energy (70+/-17 kcal) of the more-aerated snack than the less-aerated snack, although they consumed a 73% greater volume of the more-aerated snack (239+/-24 ml). These findings suggest that subjects responded to both the weight and volume of the snack. Despite differences in intake, hunger and fullness ratings did not differ across conditions. The serving method did not significantly affect intake. Results from this study indicate that incorporating air into food provides a strategy to reduce energy intake from energy-dense snacks.

Lubiprostone plus PEG electrolytes versus placebo plus PEG electrolytes for outpatient colonoscopy preparation: a randomized, double-blind placebo-controlled trial.

PubMed

Sofi, Aijaz A; Nawras, Ali T; Pai, Chetan; Samuels, Qiana; Silverman, Ann L

2015-01-01

Bowel preparation using large volume of polyethylene glycol (PEG) solutions is often poorly tolerated. Therefore, there are ongoing efforts to develop an alternative bowel cleansing regimen that should be equally effective and better tolerated. The aim of this study was to assess the efficacy of lubiprostone (versus placebo) plus PEG as a bowel cleansing preparation for colonoscopy. Our study was a randomized, double-blind placebo-controlled design. Patients scheduled for screening colonoscopy were randomized 1:1 to lubiprostone (group 1) or placebo (group 2) plus 1 gallon of PEG. The primary endpoints were patient's tolerability and endoscopist's evaluation of the preparation quality. The secondary endpoint was to determine any reduction in the amount of PEG consumed in the lubiprostone group compared with the placebo group. One hundred twenty-three patients completed the study and were included in the analysis. There was no difference in overall cleanliness. The volume of PEG was similar in both the groups. The volume of PEG approached significance as a predictor of improved score for both the groups (P = 0.054). Lubiprostone plus PEG was similar to placebo plus PEG in colon cleansing and volume of PEG consumed. The volume of PEG consumed showed a trend toward improving the quality of the colon cleansing.

Alcohol operant self-administration: Investigating how alcohol-seeking behaviors predict drinking in mice using two operant approaches

PubMed Central

Blegen, Mariah B.; Silva, Daniel da Silva E; Bock, Roland; Morisot, Nadege; Ron, Dorit; Alvarez, Veronica A.

2018-01-01

Alcohol operant self-administration paradigms are critical tools for studying the neural circuits implicated in both alcohol-seeking and consummatory behaviors and for understanding the neural basis underlying alcohol-use disorders. In this study, we investigate the predictive value of two operant models of oral alcohol self-administration in mice, one in which alcohol is delivered into a cup following nose-poke responses with no accurate measurement of consumed alcohol solution, and another paradigm that provides access to alcohol via a sipper tube following lever presses and where lick rate and consumed alcohol volume can be measured. The goal was to identify a paradigm where operant behaviors such as lever presses and nose pokes, as well as other tracked behavior such as licks and head entries, can be used to reliably predict blood alcohol concentration (BAC). All mice were first exposed to alcohol in the home cage using the “drinking in the dark” (DID) procedure for 3 weeks and then were trained in alcohol self-administration using either of the operant paradigms for several weeks. Even without sucrose fading or food pre-training, mice acquired alcohol self-administration with both paradigms. However, neither lever press nor nose-poke rates were good predictors of alcohol intake or BAC. Only the lick rate and consumed alcohol were consistently and significantly correlated with BAC. Using this paradigm that accurately measures alcohol intake, unsupervised cluster analysis revealed three groups of mice: high-drinking (43%), low-drinking (37%), and non-drinking mice (20%). High-drinking mice showed faster acquisition of operant responding and achieved higher BACs than low-drinking mice. Lick rate and volume consumed varied with the alcohol concentration made available only for high- and low-drinking mice, but not for non-drinking mice. In addition, high- and low-drinking mice showed similar patterns during extinction and significant cue-induced reinstatement of seeking. Only high-drinking mice showed insensitivity to quinine adulteration, indicating a willingness to drink alcohol despite pairing with aversive stimuli. Thus, this study shows that relying on active presses is not an accurate determination of drinking behavior in mice. Only paradigms that allow for accurate measurements of consumed alcohol and/or lick rate are valid models of operant alcohol self-administration, where compulsive-like drinking could be accurately determined based on changes in alcohol intake when paired with bitter-tasting stimuli. PMID:29310048

Bacterial and fungal DNA extraction from blood samples: automated protocols.

PubMed

Lorenz, Michael G; Disqué, Claudia; Mühl, Helge

2015-01-01

Automation in DNA isolation is a necessity for routine practice employing molecular diagnosis of infectious agents. To this end, the development of automated systems for the molecular diagnosis of microorganisms directly in blood samples is at its beginning. Important characteristics of systems demanded for routine use include high recovery of microbial DNA, DNA-free containment for the reduction of DNA contamination from exogenous sources, DNA-free reagents and consumables, ideally a walkaway system, and economical pricing of the equipment and consumables. Such full automation of DNA extraction evaluated and in use for sepsis diagnostics is yet not available. Here, we present protocols for the semiautomated isolation of microbial DNA from blood culture and low- and high-volume blood samples. The protocols include a manual pretreatment step followed by automated extraction and purification of microbial DNA.

Electrical-power-system data base for consumables analysis. Volume 2: Electrical equipment utilization

NASA Technical Reports Server (NTRS)

Pipher, M. D.; Green, P. A.; Wolfgram, D. F.

1975-01-01

A catalogue is presented of space shuttle electrical equipment as used within a standardized data base for EPS consumables analyses. The general function and expected usage of each type of electrical equipment are described, and the usage of specific equipment of each type in the performance of EPS consumables analyses is defined.

Enhanced FIB-SEM systems for large-volume 3D imaging

PubMed Central

Xu, C Shan; Hayworth, Kenneth J; Lu, Zhiyuan; Grob, Patricia; Hassan, Ahmed M; García-Cerdán, José G; Niyogi, Krishna K; Nogales, Eva; Weinberg, Richard J; Hess, Harald F

2017-01-01

Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) can automatically generate 3D images with superior z-axis resolution, yielding data that needs minimal image registration and related post-processing. Obstacles blocking wider adoption of FIB-SEM include slow imaging speed and lack of long-term system stability, which caps the maximum possible acquisition volume. Here, we present techniques that accelerate image acquisition while greatly improving FIB-SEM reliability, allowing the system to operate for months and generating continuously imaged volumes > 106 µm3. These volumes are large enough for connectomics, where the excellent z resolution can help in tracing of small neuronal processes and accelerate the tedious and time-consuming human proofreading effort. Even higher resolution can be achieved on smaller volumes. We present example data sets from mammalian neural tissue, Drosophila brain, and Chlamydomonas reinhardtii to illustrate the power of this novel high-resolution technique to address questions in both connectomics and cell biology. DOI: http://dx.doi.org/10.7554/eLife.25916.001 PMID:28500755

Enhanced FIB-SEM systems for large-volume 3D imaging

DOE PAGES

Xu, C. Shan; Hayworth, Kenneth J.; Lu, Zhiyuan; ...

2017-05-13

Focused Ion Beam Scanning Electron Microscopy (FIB-SEM) can automatically generate 3D images with superior z-axis resolution, yielding data that needs minimal image registration and related post-processing. Obstacles blocking wider adoption of FIB-SEM include slow imaging speed and lack of long-term system stability, which caps the maximum possible acquisition volume. Here, we present techniques that accelerate image acquisition while greatly improving FIB-SEM reliability, allowing the system to operate for months and generating continuously imaged volumes > 10 6 ?m 3 . These volumes are large enough for connectomics, where the excellent z resolution can help in tracing of small neuronal processesmore » and accelerate the tedious and time-consuming human proofreading effort. Even higher resolution can be achieved on smaller volumes. We present example data sets from mammalian neural tissue, Drosophila brain, and Chlamydomonas reinhardtii to illustrate the power of this novel high-resolution technique to address questions in both connectomics and cell biology.« less

Chemical alternatives assessment: the case of flame retardants.

PubMed

Howard, Gregory J

2014-12-01

Decisions on chemical substitution are made rapidly and by many stakeholders; these decisions may have a direct impact on consumer exposures, and, when a hazard exists, to consumer risks. Flame retardants (FRs) represent particular challenges, including very high production volumes, designed-in persistence, and often direct consumer exposure. Newer FR products, as with other industrial chemicals, typically lack data on hazard and exposure, and in many cases even basic information on structure and use in products is unknown. Chemical alternatives assessment (CAA) provides a hazard-focused approach to distinguishing between possible substitutions; variations on this process are used by several government and numerous corporate entities. By grouping chemicals according to functional use, some information on exposure potential can be inferred, allowing for decisions based on those hazard properties that are most distinguishing. This approach can help prevent the "regrettable substitution" of one chemical with another of equal, or even higher, risk. Copyright © 2014 Elsevier Ltd. All rights reserved.

Alcohol consumption and burden of disease in the Americas in 2012: implications for alcohol policy.

PubMed

Shield, Kevin D; Monteiro, Maristela; Roerecke, Michael; Smith, Blake; Rehm, Jürgen

2015-12-01

To describe the volume and patterns of alcohol consumption up to and including 2012, and to estimate the burden of disease attributable to alcohol consumption as measured in deaths and disability-adjusted life years (DALYs) lost in the Americas in 2012. Measures of alcohol consumption were obtained from the World Health Organization (WHO) Global Information System on Alcohol and Health (GISAH). The burden of alcohol consumption was estimated in both deaths and DALYs lost based on mortality data obtained from WHO, using alcohol-attributable fractions. Regional groupings for the Americas were based on the WHO classifications for 2004 (according to child and adult mortality). Regional variations were observed in the overall volume of alcohol consumed, the proportion of the alcohol market attributable to unrecorded alcohol consumption, drinking patterns, prevalence of drinking, and prevalence of heavy episodic drinking, with inhabitants of the Americas consuming more alcohol (8.4 L of pure alcohol per adult in 2012) compared to the world average. The Americas also experienced a high burden of disease attributable to alcohol consumption (4.7% of all deaths and 6.7% of all DALYs lost), especially in terms of injuries attributable to alcohol consumption. Alcohol is consumed in a harmful manner in the Americas, leading to a high burden of disease, especially in terms of injuries. New cost-effective alcohol policies, such as increasing alcohol taxation, increasing the minimum legal age to purchase alcohol, and decreasing the maximum legal blood alcohol content while driving, should be implemented to decrease the harmful consumption of alcohol and the resulting burden of disease.

Online doctor reviews: do they track surgeon volume, a proxy for quality of care?

PubMed

Segal, Jeffrey; Sacopulos, Michael; Sheets, Virgil; Thurston, Irish; Brooks, Kendra; Puccia, Ryan

2012-04-10

Increasingly, consumers are accessing the Internet seeking health information. Consumers are also using online doctor review websites to help select their physician. Such websites tally numerical ratings and comments from past patients. To our knowledge, no study has previously analyzed whether doctors with positive online reputations on doctor review websites actually deliver higher quality of care typically associated with better clinical outcomes and better safety records. For a number of procedures, surgeons who perform more procedures have better clinical outcomes and safety records than those who perform fewer procedures. Our objective was to determine if surgeon volume, as a proxy for clinical outcomes and patient safety, correlates with online reputation. We investigated the numerical ratings and comments on 9 online review websites for high- and low-volume surgeons for three procedures: lumbar surgery, total knee replacement, and bariatric surgery. High-volume surgeons were randomly selected from the group within the highest quartile of claims submitted for reimbursement using the procedures' relevant current procedural terminology (CPT) codes. Low-volume surgeons were randomly selected from the lowest quartile of submitted claims for the procedures' relevant CPT codes. Claims were collated within the Normative Health Information Database, covering multiple payers for more than 25 million insured patients. Numerical ratings were found for the majority of physicians in our sample (547/600, 91.2%) and comments were found for 385/600 (64.2%) of the physicians. We found that high-volume (HV) surgeons could be differentiated from low-volume (LV) surgeons independently by analyzing: (1) the total number of numerical ratings per website (HV: mean = 5.85; LV: mean = 4.87, P<.001); (2) the total number of text comments per website (HV: mean = 2.74; LV: mean = 2.30, P=.05); (3) the proportion of glowing praise/total comments about quality of care (HV: mean = 0.64; LV: mean = 0.51, P=.002); and (4) the proportion of scathing criticism/total comments about quality of care (HV: mean = 0.14; LV: mean = 0.23, P= .005). Even when these features were combined, the effect size, although significant, was still weak. The results revealed that one could accurately identify a physician's patient volume via discriminant and classification analysis 61.6% of the time. We also found that high-volume surgeons could not be differentiated from low-volume surgeons by analyzing (1) standardized z score numerical ratings (HV: mean = 0.07; LV: mean = 0, P=.27); (2) proportion of glowing praise/total comments about customer service (HV: mean = 0.24; LV: mean = 0.22, P=.52); and (3) proportion of scathing criticism/total comments about customer service (HV: mean = 0.19; LV: mean = 0.21, P=.48). Online review websites provide a rich source of data that may be able to track quality of care, although the effect size is weak and not consistent for all review website metrics.

Index to Research in Home Economics: 1972-1986.

ERIC Educational Resources Information Center

Fetterman, Nelma I.; Lefebvre, Verna M.

This index lists 945 research articles from 4 English-language journals in the field of home economics: the "Canadian Home Economics Journal," volumes 23-30; the "Home Economics Research Journal" (United States), volumes 1-14; the "Journal of Consumer Studies and Home Economics" (United Kingdom), volumes 1-10; and the…

DOS Design/Application Tools System/Segment Specification. Volume 3

DTIC Science & Technology

1990-09-01

consume the same information to obtain that information without "manual" translation by people. Solving the information management problem effectively...and consumes ’ even more information than centralized development. Distributed systems cannot be developed successfully by experiment without...human intervention because all tools consume input from and produce output to the same repository. New tools are easily absorbed into the environment

Windows of Opportunity: How Business Invests in U.S. Hispanic Markets. Volume II: Business Development.

ERIC Educational Resources Information Center

Hispanic Policy Development Project, Inc., New York, NY.

This is volume 2 of a two-volume series that addresses the critical need to forge closer ties between corporate America and Hispanic Americans. Volume 2 presents strategies for involving Hispanics in business. Techniques are given for developing businesses that will tap the Hispanic population as consumers and workers. The key elements of this…

10 CFR Appendix A to Subpart C of... - Sampling Plan for Enforcement Testing of Covered Consumer Products and Certain High-Volume...

Code of Federal Regulations, 2013 CFR

2013-01-01

... in Step (c). (6) For an energy or water consumption standard (ECS), compute the upper control limit (UCL2) for the mean of the combined first and second samples using the DOE ECS as the desired mean and a...)(1). (7) For an energy or water consumption standard (ECS), compare the combined sample mean (x2) to...

10 CFR Appendix A to Subpart C of... - Sampling Plan for Enforcement Testing of Covered Consumer Products and Certain High-Volume...

Code of Federal Regulations, 2014 CFR

2014-01-01

... in Step (c). (6) For an energy or water consumption standard (ECS), compute the upper control limit (UCL2) for the mean of the combined first and second samples using the DOE ECS as the desired mean and a...)(1). (7) For an energy or water consumption standard (ECS), compare the combined sample mean (x2) to...

10 CFR Appendix A to Subpart C of... - Sampling Plan for Enforcement Testing of Covered Consumer Products and Certain High-Volume...

Code of Federal Regulations, 2012 CFR

2012-01-01

... in Step (c). (6) For an energy or water consumption standard (ECS), compute the upper control limit (UCL2) for the mean of the combined first and second samples using the DOE ECS as the desired mean and a...)(1). (7) For an energy or water consumption standard (ECS), compare the combined sample mean (x2) to...

Lunar Architecture Team - Phase 2 Habitat Volume Estimation: "Caution When Using Analogs"

NASA Technical Reports Server (NTRS)

Rudisill, Marianne; Howard, Robert; Griffin, Brand; Green, Jennifer; Toups, Larry; Kennedy, Kriss

2008-01-01

The lunar surface habitat will serve as the astronauts' home on the moon, providing a pressurized facility for all crew living functions and serving as the primary location for a number of crew work functions. Adequate volume is required for each of these functions in addition to that devoted to housing the habitat systems and crew consumables. The time constraints of the LAT-2 schedule precluded the Habitation Team from conducting a complete "bottoms-up" design of a lunar surface habitation system from which to derive true volumetric requirements. The objective of this analysis was to quickly derive an estimated total pressurized volume and pressurized net habitable volume per crewmember for a lunar surface habitat, using a principled, methodical approach in the absence of a detailed design. Five "heuristic methods" were used: historical spacecraft volumes, human/spacecraft integration standards and design guidance, Earth-based analogs, parametric "sizing" tools, and conceptual point designs. Estimates for total pressurized volume, total habitable volume, and volume per crewmember were derived using these methods. All method were found to provide some basis for volume estimates, but values were highly variable across a wide range, with no obvious convergence of values. Best current assumptions for required crew volume were provided as a range. Results of these analyses and future work are discussed.

Hand volume estimates based on a geometric algorithm in comparison to water displacement.

PubMed

Mayrovitz, H N; Sims, N; Hill, C J; Hernandez, T; Greenshner, A; Diep, H

2006-06-01

Assessing changes in upper extremity limb volume during lymphedema therapy is important for determining treatment efficacy and documenting outcomes. Although arm volumes may be determined by tape measure, the suitability of circumference measurements to estimate hand volumes is questionable because of the deviation in circularity of hand shape. Our aim was to develop an alternative measurement procedure and algorithm for routine use to estimate hand volumes. A caliper was used to measure hand width and depth in 33 subjects (66 hands) and volumes (VE) were calculated using an elliptical frustum model. Using regression analysis and limits of agreement (LOA), VE was compared to volumes determined by water displacement (VW), to volumes calculated from tape-measure determined circumferences (VC), and to a trapezoidal model (VT). VW and VE (mean +/- SD) were similar (363 +/- 98 vs. 362 +/-100 ml) and highly correlated; VE = 1.01VW -3.1 ml, r=0.986, p<0.001, with LOA of +/- 33.5 ml and +/- 9.9 %. In contrast, VC (480 +/- 138 ml) and VT (432 +/- 122 ml) significantly overestimated volume (p<0.0001). These results indicate that the elliptical algorithm can be a useful alternative to water displacement when hand volumes are needed and the water displacement method is contra-indicated, impractical to implement, too time consuming or not available.

Foot volume estimates based on a geometric algorithm in comparison to water displacement.

PubMed

Mayrovitz, H N; Sims, N; Litwin, B; Pfister, S

2005-03-01

Assessing lower extremity limb volume and its change during and after lymphedema therapy is important for determining treatment efficacy and documenting outcomes. Although leg volumes may be determined by tape measure and other methods, there is no metric method to routinely assess foot volumes. Exclusion of foot volumes can under- or overestimate therapeutic progress. Our aim was to develop and test a metric measurement procedure and algorithm for practicing therapists to use to estimate foot volumes. The method uses a caliper and ruler to measure foot dimensions at standardized locations and calculates foot volume (VM) by a mathematical algorithm. VM was compared to volumes measured by water displacement (Vw) in 30 subjects (60 feet) using regression analysis and limits of agreement (LOA). Vw and VM (mean +/- sd) were similar 857 +/- 150 ml vs. 859 +/- 154 ml, and were highly correlated VM = 1.00Vw + 1.67 ml, r = 0.965, p < 0.001. The LOA for absolute volume differences and percentages were respectively +/- 79.6 ml and +/- 9.28 %. These results indicate that this metric method can be a useful alternative to water displacement when foot volumes are needed, but the water displacement method is contraindicated, impractical to implement, too time consuming or is not available.

Energy expenditure and dietary intake during high-volume and low-volume training periods among male endurance athletes.

PubMed

Drenowatz, Clemens; Eisenmann, Joey C; Carlson, Joseph J; Pfeiffer, Karin A; Pivarnik, James M

2012-04-01

The primary purpose of this study was to examine dietary intake in endurance-trained athletes during a week of high-volume and a week of low-volume training while measuring exercise energy expenditure (EEE), resting metabolic rate (RMR), and nonexercise activity thermogenesis (NEAT). In addition, compliance with current American College of Sports Medicine/American Dietetic Association nutrition and performance recommendations for macronutrients was evaluated. Energy expenditure and dietary intake were measured in 15 male endurance athletes during 2 nonconsecutive weeks resembling a high-volume and a low-volume training period. Anthropometric measurements were taken and percentage body fat was determined at the beginning and end of each week of training. Total daily energy expenditure (TDEE) was calculated by summing RMR, NEAT, and EEE. Dietary intake was assessed with an online food-frequency questionnaire completed at the end of each week of data collection. Despite significant differences between TDEE and energy intake, no difference in body composition between the beginning and end of either week of training was observed, suggesting underreporting of caloric intake. Further, no changes in total caloric intake or macronutrient intake occurred even though TDEE increased significantly during the high-volume training. Reported carbohydrate intake (4.5 g·kg(-1)) and fiber intake (25 g·day(-1)) were below recommendations, whereas fat intake (1.3 g·kg(-1)) was slightly above recommendations. In summary, no short-term dietary adjustments occurred in response to differences in training regimen. Because these athletes were generally consuming a Western diet, they may have required some support to achieve desirable intakes for health and performance.

Incorporation of air into a snack food reduces energy intake

PubMed Central

Osterholt, Kathrin M.; Roe, Liane S.

2007-01-01

This study investigated how the air content of a familiar snack food affected energy intake and whether varying the method of serving the snack modified intake. We tested two versions of an extruded snack (cheese puffs) that were equal in energy density (5.7 kcal/g), but differed in energy per volume (less-aerated snack: 1.00 kcal/ml; more- aerated snack: 0.45 kcal/ml). In a within-subjects design, 16 women and 12 men consumed the snacks ad libitum in the laboratory during four afternoon sessions. A standard volume (1250 ml) of each snack was served once in a bowl and once in an opaque bag. Results showed that intake of the two snacks differed significantly by energy (p=0.0003) and volume (p<0.0001); subjects consumed 21% less weight and energy (70±17 kcal) of the more-aerated snack than the less-aerated snack, although they consumed a 73% greater volume of the more-aerated snack (239±24 ml). These findings suggest that subjects responded to both the weight and volume of the snack. Despite differences in intake, hunger and fullness ratings did not differ across conditions. The serving method did not significantly affect intake. Results from this study indicate that incorporating air into food provides a strategy to reduce energy intake from energy-dense snacks. PMID:17188782

Changes in intravenous fluid use patterns in Australia and New Zealand: evidence of research translating into practice.

PubMed

Glassford, Neil J; French, Craig J; Bailey, Michael; Mârtensson, Johan; Eastwood, Glenn M; Bellomo, Rinaldo

2016-06-01

To describe changes in the use of intravenous (IV) fluid by quantity and type in different regions of Australia and New Zealand. We conducted a retrospective ecological study examining regional and temporal trends in IV fluid consumption across Australia and New Zealand over the periods 2012-2013 and 2013- 2014, using national proprietary sales data as a surrogate for consumption, and demographic data from the public domain. More than 13.3 million litres of IV fluid were consumed in Australia and New Zealand in 2012-2013, and more than 13.9 million litres in 2013-2014, with colloid solutions accounting for < 2%. There was marked regional variation in consumption of fluids, by volumes and proportions used, when standardised to overall Australian and New Zealand values. There was no significant change in the overall volume of crystalloid solutions consumed but there was a significant decrease (9%; P = 0.02) in the ratio of unbalanced to balanced crystalloid solutions consumed. Consumption of all forms of colloid solutions decreased, with a 12% reduction overall (P = 0.02), primarily driven by a 67% reduction in the consumption of hydroxyethyl starch (HES) solutions. The amount and type of IV fluid use, as determined by fluid sales, is highly variable across Australia and New Zealand. However, overall use of balanced crystalloid solutions is increasing and the use of HES has decreased dramatically.

Real-time volume rendering of 4D image using 3D texture mapping

NASA Astrophysics Data System (ADS)

Hwang, Jinwoo; Kim, June-Sic; Kim, Jae Seok; Kim, In Young; Kim, Sun Il

2001-05-01

Four dimensional image is 3D volume data that varies with time. It is used to express deforming or moving object in virtual surgery of 4D ultrasound. It is difficult to render 4D image by conventional ray-casting or shear-warp factorization methods because of their time-consuming rendering time or pre-processing stage whenever the volume data are changed. Even 3D texture mapping is used, repeated volume loading is also time-consuming in 4D image rendering. In this study, we propose a method to reduce data loading time using coherence between currently loaded volume and previously loaded volume in order to achieve real time rendering based on 3D texture mapping. Volume data are divided into small bricks and each brick being loaded is tested for similarity to one which was already loaded in memory. If the brick passed the test, it is defined as 3D texture by OpenGL functions. Later, the texture slices of the brick are mapped into polygons and blended by OpenGL blending functions. All bricks undergo this test. Continuously deforming fifty volumes are rendered in interactive time with SGI ONYX. Real-time volume rendering based on 3D texture mapping is currently available on PC.

Functional requirements for onboard management of space shuttle consumables, volume 2.

NASA Technical Reports Server (NTRS)

Graf, P. J.; Herwig, H. A.; Neel, L. W.

1973-01-01

A study was conducted to develop the functional requirements for onboard management of space shuttle consumables. A specific consumables management concept for the space shuttle vehicle was developed and the functional requirements for the onboard portion of the concept were generated. Consumables management is the process of controlling or influencing the usage of expendable materials involved in vehicle subsystem operation. The subsystems considered in the study are: (1) propulsion, (2) power generation, and (3) environmental and life support.

Strategies for hydration and energy provision during soccer-specific exercise.

PubMed

Clarke, N D; Drust, B; MacLaren, D P M; Reilly, T

2005-12-01

The aim of the present study was to investigate the effect of manipulating the provision of sports drink during soccer-specific exercise on metabolism and performance. Soccer players (N = 12) performed a soccer-specific protocol on three occasions. On two, 7 mL/kg carbohydrate-electrolyte (CHOv) or placebo (PLA) solutions were ingested at 0 and 45 min. On a third, the same total volume of carbohydrate-electrolyte was consumed (CHOf) in smaller volumes at 0, 15, 30, 45, 60, and 75 min. Plasma glucose, glycerol, non-esterified free fatty acids (NEFA), cortisol, and CHO oxidation were not significantly different between CHOv and CHOf (P > 0.05). Sprint power was not significantly affected (P > 0.05) by the experimental trials. This study demonstrates when the total volume of carbohydrate consumed is equal, manipulating the timing and volume of ingestion elicits similar metabolic responses without affecting exercise performance.

Micro-optical fabrication by ultraprecision diamond machining and precision molding

NASA Astrophysics Data System (ADS)

Li, Hui; Li, Likai; Naples, Neil J.; Roblee, Jeffrey W.; Yi, Allen Y.

2017-06-01

Ultraprecision diamond machining and high volume molding for affordable high precision high performance optical elements are becoming a viable process in optical industry for low cost high quality microoptical component manufacturing. In this process, first high precision microoptical molds are fabricated using ultraprecision single point diamond machining followed by high volume production methods such as compression or injection molding. In the last two decades, there have been steady improvements in ultraprecision machine design and performance, particularly with the introduction of both slow tool and fast tool servo. Today optical molds, including freeform surfaces and microlens arrays, are routinely diamond machined to final finish without post machining polishing. For consumers, compression molding or injection molding provide efficient and high quality optics at extremely low cost. In this paper, first ultraprecision machine design and machining processes such as slow tool and fast too servo are described then both compression molding and injection molding of polymer optics are discussed. To implement precision optical manufacturing by molding, numerical modeling can be included in the future as a critical part of the manufacturing process to ensure high product quality.

THz and sub-THz (MMW)-over-Fiber Data Links and Radar Technology

DTIC Science & Technology

2016-12-05

propagation loss in free-space or transmission line, and their inherent straight-line path of propagation affects connections and synchronization between the...effort is to realize photonic-network compatible wireless data link at data rate up to 100 Gbit/s, and to explore a real-time MMW radar imaging system...global village at terabit rate, hopefully wirelessly. Unfortunately, such high-volume data transmission over air consumes radio bandwidth—lots of it

THz and sub THz (MMW)-over-Fiber Data Links and Radar Technology

DTIC Science & Technology

2016-11-30

propagation loss in free-space or transmission line, and their inherent straight-line path of propagation affects connections and synchronization between the...effort is to realize photonic-network compatible wireless data link at data rate up to 100 Gbit/s, and to explore a real-time MMW radar imaging system...global village at terabit rate, hopefully wirelessly. Unfortunately, such high-volume data transmission over air consumes radio bandwidth—lots of it

Reducing microplastics from facial exfoliating cleansers in wastewater through treatment versus consumer product decisions.

PubMed

Chang, Michelle

2015-12-15

Microplastics (<5mm) have been discovered in fresh and saltwater ecosystems, sediments, and wastewater effluent around the world. Their ability to persist and accumulate up food chains should be a concern as research is still experimenting with techniques to assess their long-term effects on the environment. I sought to characterize the microbeads found in facial exfoliating cleansers so as to better understand how to reduce this source of pollution through consumer use and wastewater treatment solutions. By sampling products from national-grossing cosmetic personal care brands, I was able to gather information on the size, color, volume, mass, and concentration of polyethylene beads in the cleansers. From that data, I modeled onto a consumer survey the estimated volume of microplastics entering a wastewater stream. Through inquiry, I learned the practices of two local wastewater treatment facilities. My findings show that consumer decisions and treatment protocols both play crucial parts in minimizing microplastic pollution. Copyright © 2015. Published by Elsevier Ltd.

Assessment of influences of cooking on cadmium and arsenic bioaccessibility in rice, using an in vitro physiologically-based extraction test.

PubMed

Zhuang, Ping; Zhang, Chaosheng; Li, Yingwen; Zou, Bi; Mo, Hui; Wu, Kejun; Wu, Jingtao; Li, Zhian

2016-12-15

The health risks associated with rice consumption may decrease if consumers use cooking practices which can reduce the bioaccessibility of metal(loid)s. The effects of cooking on the Cd and As bioaccessibility, at three contamination levels of rice, were studied. Results indicated that cooking reduced bioaccessibility of Cd and As in rice. Cooking resulted in a significant increase (p<0.01) of Cd and As concentrations in the residual fraction. Low volume water-cooking of rice to dryness reduced total Cd by about 10% for rices A and B, while medium or high volume water-cooking had no effect on Cd bioaccessibility in all rice types. In contrast, low volume cooking did not remove As, but a significant decrease (p<0.05) was observed when cooking with higher volumes of water. This study provides information for a better understanding of more realistic estimation of metal(loid)s exposure from rice and the possible health risks. Copyright © 2016. Published by Elsevier Ltd.

Caffeine Consumption Among Naval Aviation Candidates.

PubMed

Sather, Thomas E; Williams, Ronald D; Delorey, Donald R; Woolsey, Conrad L

2017-04-01

Education frequently dictates students need to study for prolonged periods of time to adequately prepare for examinations. This is especially true with aviation preflight indoctrination (API) candidates who have to assimilate large volumes of information in a limited amount of time during API training. The purpose of this study was to assess caffeine consumption patterns (frequency, type, and volume) among naval aviation candidates attending API to determine the most frequently consumed caffeinated beverage and to examine if the consumption of a nonenergy drink caffeinated beverage was related to energy drink consumption. Data were collected by means of an anonymous 44-item survey administered and completed by 302 students enrolled in API at Naval Air Station Pensacola, FL. Results indicated the most frequently consumed caffeinated beverage consumed by API students was coffee (86.4%), with daily coffee consumption being approximately 28% and the most frequent pattern of consumption being 2 cups per day (85%). The least frequently consumed caffeinated beverages reported were energy drinks (52%) and energy shots (29.1%). The present study also found that the consumption patterns (weekly and daily) of caffeinated beverages (coffee and cola) were positively correlated to energy drink consumption patterns. Naval aviation candidates' consumption of caffeinated beverages is comparable to other college and high school cohorts. This study found that coffee and colas were the beverages of choice, with energy drinks and energy shots being the least frequently reported caffeinated beverages used. Additionally, a relationship between the consumption of caffeinated beverages and energy drinks was identified.Sather TE, Williams RD, Delorey DR, Woolsey CL. Caffeine consumption among naval aviation candidates. Aerosp Med Hum Perform. 2017; 88(4):399-405.

Keeping Pace with Your Eating: Visual Feedback Affects Eating Rate in Humans

PubMed Central

Bosworth, Matthew L.; Godinot, Nicolas; Martin, Nathalie; Rogers, Peter J.; Brunstrom, Jeffrey M.

2016-01-01

Deliberately eating at a slower pace promotes satiation and eating quickly has been associated with a higher body mass index. Therefore, understanding factors that affect eating rate should be given high priority. Eating rate is affected by the physical/textural properties of a food, by motivational state, and by portion size and palatability. This study explored the prospect that eating rate is also influenced by a hitherto unexplored cognitive process that uses ongoing perceptual estimates of the volume of food remaining in a container to adjust intake during a meal. A 2 (amount seen; 300ml or 500ml) x 2 (amount eaten; 300ml or 500ml) between-subjects design was employed (10 participants in each condition). In two ‘congruent’ conditions, the same amount was seen at the outset and then subsequently consumed (300ml or 500ml). To dissociate visual feedback of portion size and actual amount consumed, food was covertly added or removed from a bowl using a peristaltic pump. This created two additional ‘incongruent’ conditions, in which 300ml was seen but 500ml was eaten or vice versa. We repeated these conditions using a savoury soup and a sweet dessert. Eating rate (ml per second) was assessed during lunch. After lunch we assessed fullness over a 60-minute period. In the congruent conditions, eating rate was unaffected by the actual volume of food that was consumed (300ml or 500ml). By contrast, we observed a marked difference across the incongruent conditions. Specifically, participants who saw 300ml but actually consumed 500ml ate at a faster rate than participants who saw 500ml but actually consumed 300ml. Participants were unaware that their portion size had been manipulated. Nevertheless, when it disappeared faster or slower than anticipated they adjusted their rate of eating accordingly. This suggests that the control of eating rate involves visual feedback and is not a simple reflexive response to orosensory stimulation. PMID:26828922

Keeping Pace with Your Eating: Visual Feedback Affects Eating Rate in Humans.

PubMed

Wilkinson, Laura L; Ferriday, Danielle; Bosworth, Matthew L; Godinot, Nicolas; Martin, Nathalie; Rogers, Peter J; Brunstrom, Jeffrey M

2016-01-01

Deliberately eating at a slower pace promotes satiation and eating quickly has been associated with a higher body mass index. Therefore, understanding factors that affect eating rate should be given high priority. Eating rate is affected by the physical/textural properties of a food, by motivational state, and by portion size and palatability. This study explored the prospect that eating rate is also influenced by a hitherto unexplored cognitive process that uses ongoing perceptual estimates of the volume of food remaining in a container to adjust intake during a meal. A 2 (amount seen; 300 ml or 500 ml) x 2 (amount eaten; 300 ml or 500 ml) between-subjects design was employed (10 participants in each condition). In two 'congruent' conditions, the same amount was seen at the outset and then subsequently consumed (300 ml or 500 ml). To dissociate visual feedback of portion size and actual amount consumed, food was covertly added or removed from a bowl using a peristaltic pump. This created two additional 'incongruent' conditions, in which 300 ml was seen but 500 ml was eaten or vice versa. We repeated these conditions using a savoury soup and a sweet dessert. Eating rate (ml per second) was assessed during lunch. After lunch we assessed fullness over a 60-minute period. In the congruent conditions, eating rate was unaffected by the actual volume of food that was consumed (300 ml or 500 ml). By contrast, we observed a marked difference across the incongruent conditions. Specifically, participants who saw 300 ml but actually consumed 500 ml ate at a faster rate than participants who saw 500 ml but actually consumed 300 ml. Participants were unaware that their portion size had been manipulated. Nevertheless, when it disappeared faster or slower than anticipated they adjusted their rate of eating accordingly. This suggests that the control of eating rate involves visual feedback and is not a simple reflexive response to orosensory stimulation.

Direct volume estimation without segmentation

NASA Astrophysics Data System (ADS)

Zhen, X.; Wang, Z.; Islam, A.; Bhaduri, M.; Chan, I.; Li, S.

2015-03-01

Volume estimation plays an important role in clinical diagnosis. For example, cardiac ventricular volumes including left ventricle (LV) and right ventricle (RV) are important clinical indicators of cardiac functions. Accurate and automatic estimation of the ventricular volumes is essential to the assessment of cardiac functions and diagnosis of heart diseases. Conventional methods are dependent on an intermediate segmentation step which is obtained either manually or automatically. However, manual segmentation is extremely time-consuming, subjective and highly non-reproducible; automatic segmentation is still challenging, computationally expensive, and completely unsolved for the RV. Towards accurate and efficient direct volume estimation, our group has been researching on learning based methods without segmentation by leveraging state-of-the-art machine learning techniques. Our direct estimation methods remove the accessional step of segmentation and can naturally deal with various volume estimation tasks. Moreover, they are extremely flexible to be used for volume estimation of either joint bi-ventricles (LV and RV) or individual LV/RV. We comparatively study the performance of direct methods on cardiac ventricular volume estimation by comparing with segmentation based methods. Experimental results show that direct estimation methods provide more accurate estimation of cardiac ventricular volumes than segmentation based methods. This indicates that direct estimation methods not only provide a convenient and mature clinical tool for cardiac volume estimation but also enables diagnosis of cardiac diseases to be conducted in a more efficient and reliable way.

Interactive dual-volume rendering visualization with real-time fusion and transfer function enhancement

NASA Astrophysics Data System (ADS)

Macready, Hugh; Kim, Jinman; Feng, David; Cai, Weidong

2006-03-01

Dual-modality imaging scanners combining functional PET and anatomical CT constitute a challenge in volumetric visualization that can be limited by the high computational demand and expense. This study aims at providing physicians with multi-dimensional visualization tools, in order to navigate and manipulate the data running on a consumer PC. We have maximized the utilization of pixel-shader architecture of the low-cost graphic hardware and the texture-based volume rendering to provide visualization tools with high degree of interactivity. All the software was developed using OpenGL and Silicon Graphics Inc. Volumizer, tested on a Pentium mobile CPU on a PC notebook with 64M graphic memory. We render the individual modalities separately, and performing real-time per-voxel fusion. We designed a novel "alpha-spike" transfer function to interactively identify structure of interest from volume rendering of PET/CT. This works by assigning a non-linear opacity to the voxels, thus, allowing the physician to selectively eliminate or reveal information from the PET/CT volumes. As the PET and CT are rendered independently, manipulations can be applied to individual volumes, for instance, the application of transfer function to CT to reveal the lung boundary while adjusting the fusion ration between the CT and PET to enhance the contrast of a tumour region, with the resultant manipulated data sets fused together in real-time as the adjustments are made. In addition to conventional navigation and manipulation tools, such as scaling, LUT, volume slicing, and others, our strategy permits efficient visualization of PET/CT volume rendering which can potentially aid in interpretation and diagnosis.

High-frequency strontium vapor laser for biomedical applications

NASA Astrophysics Data System (ADS)

Hvorostovsky, A.; Kolmakov, E.; Kudashev, I.; Redka, D.; Kancer, A.; Kustikova, M.; Bykovskaya, E.; Mayurova, A.; Stupnikov, A.; Ruzankina, J.; Tsvetkov, K.; Lukyanov, N.; Paklinov, N.

2018-02-01

Sr-laser with high pulse repetition rate and high peak radiation power is a unique tool for studying rapidly occurring processes in time (plasma diagnostics, photoablation, etc.). In addition, the study of the frequency characteristics of the active medium of the laser helps to reveal the physics of the formation of an inverse medium in metal vapor lasers. In this paper, an experimental study of an Sr-laser with an active volume of 5.8 cm3 in the pulse repetition frequency range from 25 to 200 kHz is carried out, and a comparison with the frequency characteristics of media with large active volumes is given. We considered the frequency characteristics of the active medium in two modes: at a constant energy in the excitation pulse CU2 / 2 and at a constant average power consumed by the rectifier. In the presented work with a small-volume GRT using the TASITR-5/12 TASITRON switch, a laser was generated for Pairs of strontium at a CSF of 200 kHz. The behavior of the characteristics of the generation lines of 6.456 μm, 1 μm, and 3 μm at increased repetition frequencies is considered. Using the example of large-volume GRT, it is shown that tubes with a large active volume increase their energy characteristics with the growth of the CSF. The possibility of laser operation at pulse repetition rates above 200 kHz is shown.

Cyber-Community for Housing, Consumer Economics Created

ERIC Educational Resources Information Center

Manley, Kelly Shannon; Sweaney, Anne L.

2007-01-01

This article discusses a curriculum resource database project for housing and consumer economics educators. This database, along with message boards, an event calendar, and discipline-related articles, is available at www.GetYourFACtS.com (Sweaney, Manley, Valente, & Black, 2002). Given the overwhelming volume of information available on the…

META II: Formal Co-Verification of Correctness of Large-Scale Cyber-Physical Systems during Design. Volume 1

DTIC Science & Technology

2011-08-01

design space is large. His research contributions are to the field of Decision-based Design, specifically in linking consumer preferences and...Integrating Consumer Preferences into Engineering Design, to be published in 2012. He received his PhD from Northwestern University in Mechanical

40 CFR 721.80 - Industrial, commercial, and consumer activities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... other than as an intermediate. (h) Use other than as a site-limited intermediate. (i) Use as an... consumer product. (p) Aggregate manufacture and importation volume for any use greater than that specified... results of the health or environmental effects studies identified in subpart E of this part for the...

40 CFR 721.80 - Industrial, commercial, and consumer activities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... other than as an intermediate. (h) Use other than as a site-limited intermediate. (i) Use as an... consumer product. (p) Aggregate manufacture and importation volume for any use greater than that specified... results of the health or environmental effects studies identified in subpart E of this part for the...

Family and Consumer Sciences Education. Subject Matters Volume 2, No. 2, Nov/Dec 2000.

ERIC Educational Resources Information Center

Techniques: Connecting Education and Careers, 2000

2000-01-01

Includes "Addressing the Critical Shortage of FACS [Family and Consumer Sciences] Educators"; "Leaving Home Economics in the Past" (Ruth E. Thaler-Carter); "Cutting-Edge Training and Career Relevance" (Ruth E. Thaler-Carter); and "Meeting the Demands of a Growth Industry" (Laird Livingston). (JOW)

Human Social Culture Behavior Modeling Program Newsletter. Volume 1. Issue 1, Spring 2009

DTIC Science & Technology

2009-03-30

the social psychol- ogy of consumer behavior . A key theory in this space is the Theory of Reasoned Action (TRA), which hypothesizes the re...useful in predicting a range of consumer behavior , including the effectiveness of anti-smoking cam- paigns and weight loss programs—each of which...Priester, J.R. (2002). The social psychology of consumer behavior . Buckingham, UK: Open University Press. Ajzen, I. & Fishbein, M. (1980

Stories of Success: Using Networking and Mentoring Relationships in Career Planning for Students with Disabilities and Their Families. ICI Tools for Inclusion Family and Consumer Series, Volume 9, Number 2.

ERIC Educational Resources Information Center

Timmons, Jaimie Ciulla; Schuster, Jennifer; Moloney, Mairead

This brief shares stories about how three students with disabilities used networking and mentoring to become interested in or learn more about a line of work, or even to find jobs. The students represented different high school grade levels and had a wide range of disabilities including learning, cognitive, physical or health-related, sensory,…

Multi-Sensory Features for Personnel Detection at Border Crossings

DTIC Science & Technology

2011-07-08

challenging problem. Video sensors consume high amounts of power and require a large volume for storage. Hence, it is preferable to use non- imaging sensors...temporal distribution of gait beats [5]. At border crossings, animals such as mules, horses, or donkeys are often known to carry loads. Animal hoof...field, passive ultrasonic, sonar, and both infrared and visi- ble video sensors. Each sensor suite is placed along the path with a spacing of 40 to

78 FR 12969 - Energy Conservation Program for Consumer Products: Energy Conservation Standards for Residential...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-26

... required to have an energy factor of at least 2.057 - (0.00113 x Rated Storage Volume in gallons). Such a...). For tanks with a Rated Storage Volume above 55 gallons: EF = 2.057 - (0.00113 x Rated Storage Volume... #0; #0;Proposed Rules #0; Federal Register #0; #0; #0;This section of the FEDERAL REGISTER...

The use of consumer depth cameras for 3D surface imaging of people with obesity: A feasibility study.

PubMed

Wheat, J S; Clarkson, S; Flint, S W; Simpson, C; Broom, D R

2018-05-21

Three dimensional (3D) surface imaging is a viable alternative to traditional body morphology measures, but the feasibility of using this technique with people with obesity has not been fully established. Therefore, the aim of this study was to investigate the validity, repeatability and acceptability of a consumer depth camera 3D surface imaging system in imaging people with obesity. The concurrent validity of the depth camera based system was investigated by comparing measures of mid-trunk volume to a gold-standard. The repeatability and acceptability of the depth camera system was assessed in people with obesity at a clinic. There was evidence of a fixed systematic difference between the depth camera system and the gold standard but excellent correlation between volume estimates (r 2 =0.997), with little evidence of proportional bias. The depth camera system was highly repeatable - low typical error (0.192L), high intraclass correlation coefficient (>0.999) and low technical error of measurement (0.64%). Depth camera based 3D surface imaging was also acceptable to people with obesity. It is feasible (valid, repeatable and acceptable) to use a low cost, flexible 3D surface imaging system to monitor the body size and shape of people with obesity in a clinical setting. Copyright © 2018 Asia Oceania Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

Issues related to the use of blood in food and animal feed.

PubMed

Ofori, Jack A; Hsieh, Yun-Hwa P

2014-01-01

Blood has traditionally been used as a high protein ingredient in both human food and animal feed, with resulting economic, environmental and nutritional benefits. However, potentially serious health and safety issues related to blood consumption, particularly the risk of pathogenic or harmful metabolic materials, the infectivity of prion diseases, and the presence of identified allergens such as bovine serum albumin (BSA), are causing many consumers to shy away from any product containing either animal blood or ingredients derived from animal blood. Thus, despite the significant volumes of blood produced by slaughterhouses, blood is currently underutilized as a food ingredient. This article reviews the use of animal blood as an ingredient in food intended for human consumption or for animal feed and discusses the related consumer concerns.

Room to Live: the sizing of Lunar and Martian Habitats

NASA Technical Reports Server (NTRS)

McGregor, Walter L.

2006-01-01

In order for man to return to space or extra terrestrial bodies for long duration missions it is important that adequate habitat volume be defined early to avoid costly delays and redesign. To properly define a habitat volume two major factors need to be considered. The first factor is the free or open space. This is the space that allows the crew room to move about the habitat. This space will vary based on crew size and length of the mission. The second major factor is the stowage space required for equipment and supplies. This includes both fixed volumes and consumables. Fixed volumes include items such as tools, communication equipment, Advanced Life Support (ALS) equipment, and support equipment. Consumables include items like filters, food, water and oxygen. This space is also dependent on crew size and mission length. A review of past missions into alien environments, such as deep sea habitats as well as space based habitats will be used to validate the assumption made in this paper. Once these key factors are defined trades must be run to optimize the overall volume of a habitat. This includes trades of disposable vs. reusable for items such as clothing, dishes, and water. Another factor to consider is the availability of in situ resources to aid in the construction of the habitat structure as well as re-supply of consumable items. A review of past missions into alien environments, such as deep sea habitats as well as space based habitats will be used to validate the assumption made in this paper. The result is a habitat sizing tool to provide a first order estimate of habitat volumes for extended mission to the surface of the moon and Mars.

High performance MPEG-audio decoder IC

NASA Technical Reports Server (NTRS)

Thorn, M.; Benbassat, G.; Cyr, K.; Li, S.; Gill, M.; Kam, D.; Walker, K.; Look, P.; Eldridge, C.; Ng, P.

1993-01-01

The emerging digital audio and video compression technology brings both an opportunity and a new challenge to IC design. The pervasive application of compression technology to consumer electronics will require high volume, low cost IC's and fast time to market of the prototypes and production units. At the same time, the algorithms used in the compression technology result in complex VLSI IC's. The conflicting challenges of algorithm complexity, low cost, and fast time to market have an impact on device architecture and design methodology. The work presented in this paper is about the design of a dedicated, high precision, Motion Picture Expert Group (MPEG) audio decoder.

Sugar-Sweetened Beverage Consumption is Associated With Change of Visceral Adipose Tissue Over 6 Years of Follow-Up

PubMed Central

Ma, Jiantao; McKeown, Nicola M.; Hwang, Shih-Jen; Hoffmann, Udo; Jacques, Paul F.; Fox, Caroline S.

2015-01-01

Background Sugar-sweetened beverage (SSB) intake has been linked to abnormal abdominal adipose tissue. We examined the prospective association of habitual SSB intake and change in visceral adipose tissue (VAT) and subcutaneous adipose tissue (SAT). Methods and Results The quantity (volume, cm3) and quality (attenuation, Hounsfield Unit) of abdominal adipose tissue were measured using computed tomography in 1,003 participants (mean age 45.3 years, 45.0% women) at exam 1 and 2 in the Framingham’s Third Generation cohort. The 2 exams were approximately 6 years apart. At baseline, SSB and diet soda intake were assessed using a valid food frequency questionnaire. Participants were categorized into 4 groups: none to <1 serving/month (non-consumers), 1 serving/month to <1 serving/week, 1 serving/week to 1 serving/day, and ≥1 serving/day (daily consumers) of either SSB or diet soda. After adjustment for multiple confounders including change in body weight, higher SSB intake was associated with greater change in VAT volume (P-trend<0.001). VAT volume increased by 658 cm3 (95%CI: 602–713), 649 cm3 (95%CI: 582–716), 707 cm3 (95%CI: 657–757), and 852 cm3 (95%CI: 760–943) from non-consumers to daily consumers. Higher SSB intake was also associated with greater decline of VAT attenuation (P-trend=0.007); however, the association became non-significant after additional adjustment for VAT volume change. In contrast, diet soda consumption was not associated with change in abdominal adipose tissue. Conclusions Regular SSB intake was associated with adverse change in both VAT quality and quantity, whereas we observed no such association for diet soda. PMID:26755505

A survey of antimicrobial usage in animals in South Africa with specific reference to food animals.

PubMed

Eagar, Hayley; Swan, Gerry; van Vuuren, Moritz

2012-08-01

The purpose of this study was to set a benchmark for a monitoring and surveillance programme on the volumes of antimicrobials available and consumed by animals for the benefit of animal health in South Africa. This survey was collated from data available from 2002 to 2004. The authorised antimicrobials available in South Africa were firstly reviewed. The majority of available antimicrobials were registered under the Stock Remedies Act 36 1947. Secondly, volumes of antimicrobials consumed were then surveyed and it was found that the majority of consumed antimicrobials were from the macrolide and pleuromutilin classes, followed by the tetracycline class, the sulphonamide class and lastly the penicillin class.Results showed that 68.5% of the antimicrobials surveyed were administered as in-feed medications. 17.5% of the total volume of antimicrobials utilised were parenteral antimicrobials, whereas antimicrobials for water medication constituted 12% of the total and 'other' dosage forms, for example the topical and aural dosage forms, constituted 1.5% of the total. Intramammary antimicrobials represented 0.04% of the total. The surveillance systems for veterinary antimicrobials used by other countries were scrutinised and compared. It was concluded that a combination of the surveillance systems applied by Australia and the United Kingdom is the best model (with modifications) to apply to the animal health industry in South Africa. Such a surveillance system, of the volumes of veterinary antimicrobials consumed, should ideally be implemented in conjunction with a veterinary antimicrobial resistance surveillance and monitoring programme. This will generate meaningful data that will contribute to the rational administration of antimicrobials in order to preserve the efficacy of the existing antimicrobials in South Africa.

Predicting consumer behavior with Web search.

PubMed

Goel, Sharad; Hofman, Jake M; Lahaie, Sébastien; Pennock, David M; Watts, Duncan J

2010-10-12

Recent work has demonstrated that Web search volume can "predict the present," meaning that it can be used to accurately track outcomes such as unemployment levels, auto and home sales, and disease prevalence in near real time. Here we show that what consumers are searching for online can also predict their collective future behavior days or even weeks in advance. Specifically we use search query volume to forecast the opening weekend box-office revenue for feature films, first-month sales of video games, and the rank of songs on the Billboard Hot 100 chart, finding in all cases that search counts are highly predictive of future outcomes. We also find that search counts generally boost the performance of baseline models fit on other publicly available data, where the boost varies from modest to dramatic, depending on the application in question. Finally, we reexamine previous work on tracking flu trends and show that, perhaps surprisingly, the utility of search data relative to a simple autoregressive model is modest. We conclude that in the absence of other data sources, or where small improvements in predictive performance are material, search queries provide a useful guide to the near future.

A procedure for the measurement of Oxygen Consumption Rates (OCRs) in red wines and some observations about the influence of wine initial chemical composition.

PubMed

Marrufo-Curtido, Almudena; Carrascón, Vanesa; Bueno, Mónica; Ferreira, Vicente; Escudero, Ana

2018-05-15

The rates at which wine consumes oxygen are important technological parameters for whose measurement there are not accepted procedures. In this work, volumes of 8 wines are contacted with controlled volumes of air in air-tight tubes containing oxygen-sensors and are further agitated at 25 °C until O 2 consumption is complete. Three exposure levels of O 2 were used: low (10 mg/L) and medium or high (18 or 32 mg/L plus the required amount to oxidize all wine SO 2 ). In each oxygen level, 2-4 independent segments following pseudo-first order kinetics were identified, plus an initial segment at which wine consumed O 2 very fast. Overall, multivariate data techniques identify six different Oxygen-Consumption-Rates (OCRs) as required to completely define wine O 2 consumption. Except the last one, all could be modeled from the wine initial chemical composition. Total acetaldehyde, Mn, Cu/Fe, blue and red pigments and gallic acid seem to be essential to determine these OCRs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Predicting consumer behavior with Web search

PubMed Central

Goel, Sharad; Hofman, Jake M.; Lahaie, Sébastien; Pennock, David M.; Watts, Duncan J.

2010-01-01

Recent work has demonstrated that Web search volume can “predict the present,” meaning that it can be used to accurately track outcomes such as unemployment levels, auto and home sales, and disease prevalence in near real time. Here we show that what consumers are searching for online can also predict their collective future behavior days or even weeks in advance. Specifically we use search query volume to forecast the opening weekend box-office revenue for feature films, first-month sales of video games, and the rank of songs on the Billboard Hot 100 chart, finding in all cases that search counts are highly predictive of future outcomes. We also find that search counts generally boost the performance of baseline models fit on other publicly available data, where the boost varies from modest to dramatic, depending on the application in question. Finally, we reexamine previous work on tracking flu trends and show that, perhaps surprisingly, the utility of search data relative to a simple autoregressive model is modest. We conclude that in the absence of other data sources, or where small improvements in predictive performance are material, search queries provide a useful guide to the near future. PMID:20876140

7 CFR 929.158 - Exemptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... organically-grown cranberries are exempted from the volume regulation as recommended by the Committee and approved by the Secretary, the following provisions to these exemptions shall apply: (a) Sales of packed-out cranberries intended for sales to consumers in fresh form shall be exempt from volume regulation...

Luxury for the masses.

PubMed

Silverstein, Michael J; Fiske, Neil

2003-04-01

Increasingly wide income disparities, higher levels of education, and greater awareness of other cultures' ideas of the good life have given rise to a new class of American consumer. And a new category of products and services, including automobiles, apparel, food, wine, and spirits, has sprung into being to cater to it. That category is called new luxury. America's middle-market consumers are trading up to higher levels of quality and taste than ever before. Members of the middle market (those earning $50,000 and above annually) collectively have around $1 trillion of disposable income. And they will pay premiums of 20% to 200% for well-designed, well-engineered, and well-crafted goods that can't be found in the mass middle market and that have the artisanal touches of traditional luxury items. Most important, even when they address basic necessities, such goods evoke and engage consumers' emotions while feeding their aspirations for a better life. Supply-side forces are essential to the rise of new luxury. Like the consumers of their goods, entrepreneurs are better educated and more sophisticated about their customers than ever before. In addition, global sourcing, falling trade barriers and transportation costs, and rising offshore manufacturing standards are making possible the economical production of alluring products of high quality. Unlike old-luxury goods, new-luxury products can generate high sales volumes despite their relatively high prices. As a result, new-luxury companies are achieving levels of profitability and growth beyond the reach of their conventional competitors. Whether the item in question is a $6 Panera sandwich or a $30,000 Mercedes, new luxury is a formula that middle-market companies, facing erosion of their market share by high-end and low-end producers, can ill afford to ignore.

No difference in ad libitum energy intake in healthy men and women consuming beverages sweetened with fructose, glucose, or high-fructose corn syrup: a randomized trial.

PubMed

Kuzma, Jessica N; Cromer, Gail; Hagman, Derek K; Breymeyer, Kara L; Roth, Christian L; Foster-Schubert, Karen E; Holte, Sarah E; Callahan, Holly S; Weigle, David S; Kratz, Mario

2015-12-01

Increased energy intake is consistently observed in individuals consuming sugar-sweetened beverages (SSBs), likely mainly because of an inadequate satiety response to liquid calories. However, SSBs have a high content of fructose, the consumption of which acutely fails to trigger responses in key signals involved in energy homeostasis. It is unclear whether the fructose content of SSBs contributes to the increased energy intake in individuals drinking SSBs. We investigated whether the relative amounts of fructose and glucose in SSBs modifies ad libitum energy intake over 8 d in healthy adults without fructose malabsorption. We conducted 2 randomized, controlled, double-blind crossover studies to compare the effects of consuming 4 servings/d of a fructose-, glucose-, or aspartame-sweetened beverage (study A; n = 9) or a fructose-, glucose-, or high-fructose corn syrup (HFCS)-sweetened beverage (study B; n = 24) for 8 d on overall energy intake. SSBs were provided at 25% of estimated energy requirement, or an equivalent volume of the aspartame-sweetened beverage, and consumption was mandatory. All solid foods were provided at 125% of estimated energy requirements and were consumed ad libitum. In study A, ad libitum energy intake was 120% ± 10%, 117% ± 12%, and 102% ± 15% of estimated energy requirements when subjects consumed the fructose-, glucose-, and aspartame-sweetened beverages. Energy intake was significantly higher in the fructose and glucose phases than in the aspartame phase (P < 0.003 for each), with no difference between the fructose and glucose phases (P = 0.462). In study B, total energy intake during the fructose, HFCS, and glucose phases was 116% ± 14%, 116% ± 16%, and 116% ± 16% of the subject's estimated total energy requirements (P = 0.880). In healthy adults, total 8-d ad libitum energy intake was increased in individuals consuming SSBs compared with aspartame-sweetened beverages. The energy overconsumption observed in individuals consuming SSBs occurred independently of the relative amounts of fructose and glucose in the beverages. These trials were registered at clinicaltrials.gov as NCT00475475 and NCT01424306. © 2015 American Society for Nutrition.

No difference in ad libitum energy intake in healthy men and women consuming beverages sweetened with fructose, glucose, or high-fructose corn syrup: a randomized trial1

PubMed Central

Kuzma, Jessica N; Cromer, Gail; Hagman, Derek K; Breymeyer, Kara L; Roth, Christian L; Foster-Schubert, Karen E; Holte, Sarah E; Callahan, Holly S; Weigle, David S; Kratz, Mario

2015-01-01

Background: Increased energy intake is consistently observed in individuals consuming sugar-sweetened beverages (SSBs), likely mainly because of an inadequate satiety response to liquid calories. However, SSBs have a high content of fructose, the consumption of which acutely fails to trigger responses in key signals involved in energy homeostasis. It is unclear whether the fructose content of SSBs contributes to the increased energy intake in individuals drinking SSBs. Objective: We investigated whether the relative amounts of fructose and glucose in SSBs modifies ad libitum energy intake over 8 d in healthy adults without fructose malabsorption. Design: We conducted 2 randomized, controlled, double-blind crossover studies to compare the effects of consuming 4 servings/d of a fructose-, glucose-, or aspartame-sweetened beverage (study A; n = 9) or a fructose-, glucose-, or high-fructose corn syrup (HFCS)–sweetened beverage (study B; n = 24) for 8 d on overall energy intake. SSBs were provided at 25% of estimated energy requirement, or an equivalent volume of the aspartame-sweetened beverage, and consumption was mandatory. All solid foods were provided at 125% of estimated energy requirements and were consumed ad libitum. Results: In study A, ad libitum energy intake was 120% ± 10%, 117% ± 12%, and 102% ± 15% of estimated energy requirements when subjects consumed the fructose-, glucose-, and aspartame-sweetened beverages. Energy intake was significantly higher in the fructose and glucose phases than in the aspartame phase (P < 0.003 for each), with no difference between the fructose and glucose phases (P = 0.462). In study B, total energy intake during the fructose, HFCS, and glucose phases was 116% ± 14%, 116% ± 16%, and 116% ± 16% of the subject’s estimated total energy requirements (P = 0.880). Conclusions: In healthy adults, total 8-d ad libitum energy intake was increased in individuals consuming SSBs compared with aspartame-sweetened beverages. The energy overconsumption observed in individuals consuming SSBs occurred independently of the relative amounts of fructose and glucose in the beverages. These trials were registered at clinicaltrials.gov as NCT00475475 and NCT01424306. PMID:26537945

High-Dietary Alpha-Tocopherol or Mixed Tocotrienols Have No Effect on Bone Mass, Density, or Turnover in Male Rats During Skeletal Maturation.

PubMed

Tennant, Katherine G; Leonard, Scott W; Wong, Carmen P; Iwaniec, Urszula T; Turner, Russell T; Traber, Maret G

2017-07-01

High levels of alpha-tocopherol, the usual vitamin E supplement, are reported to decrease bone mass in rodents; however, the effects of other vitamin E forms on the skeleton are unknown. To test the hypothesis that high intakes of various vitamin E forms or the vitamin E metabolite, carboxyethyl hydroxy chromanol, were detrimental to bone status, Sprague-Dawley rats (n = 6 per group, 11-week males) for 18 weeks consumed semipurified diets that contained adequate alpha-tocopherol, high alpha-tocopherol (500 mg/kg diet), or 50% Tocomin (250 mg mixed tocopherols and tocotrienols/kg diet). Vitamin E status was evaluated by measuring plasma, liver, and bone marrow vitamin E concentrations. Bone density, microarchitecture (cross-sectional volume, cortical volume, marrow volume, cortical thickness, and cancellous bone volume fraction, trabecular number, thickness, and spacing), and cancellous bone formation were assessed in the tibia using dual-energy X-ray absorptiometry, microcomputed tomography, and histomorphometry, respectively. In addition, serum osteocalcin was assessed as a global marker of bone turnover; gene expression in response to treatment was evaluated in the femur using targeted (osteogenesis related) gene profiling. No significant differences were detected between treatment groups for any of the bone endpoints measured. Vitamin E supplementation, either as alpha-tocopherol or mixed tocotrienols, while increasing vitamin E concentrations both in plasma and tissues, had no effect on the skeleton in rats.

Formulation of detailed consumables management models for the development (preoperational) period of advanced space transportation system. Volume 4: Flight data file contents

NASA Technical Reports Server (NTRS)

Zamora, M. A.

1976-01-01

The contents of the Flight Data File which constitute the data required by and the data generated by the Mission Planning Processor are presented for the construction of the timeline and the determination of the consumables requirements of a given mission.

'My lips are sealed' - The impact of package resealability on the consumption of tempting foods.

PubMed

De Bondt, Caroline; Van Kerckhove, Anneleen; Geuens, Maggie

2017-10-01

Resealable packages are nowadays omnipresent on store shelves. While the main advantage of the resealability feature is its ability to reclose the package in order to extend the shelf life of the food product inside, the present research's aim is to assess whether this advantage also has implications for palatable, energy-dense food consumption. Two studies provide intentional as well as behavioral evidence for the claim that consumers are better able to self-regulate their consumption and thus eat less in one occasion when a palatable, energy-dense food product is offered in a resealable (vs. unresealable) package. A third study investigates the effect of package resealability across multiple consumption occasions and reveals that the resealability feature limits the volume consumed on each occasion (conditional on consumption incidence) while it does not accelerate consumption frequency, resulting in a lower total consumed volume of palatable, energy-dense snacks over a six-day period. This research offers actionable insights for consumer welfare and public health care and aids manufacturers in delineating optimal food packaging strategies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Impacts of Outer Continental Shelf (OCS) development on recreation and tourism. Volume 5. Program logic manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The final report for the project is presented in five volumes. This volume is the Programmer's Manual. It covers: a system overview, attractiveness component of gravity model, trip-distribution component of gravity model, economic-effects model, and the consumer-surplus model. The project sought to determine the impact of Outer Continental Shelf development on recreation and tourism.

Veterinary Specialist, 1-2. Military Curriculum Materials for Vocational and Technical Education.

ERIC Educational Resources Information Center

Ohio State Univ., Columbus. National Center for Research in Vocational Education.

These military-developed curriculum materials consist of five volumes of text information, student workbooks, and supplements for use in training veterinary specialists. Covered in the individual volumes are the following topics: the veterinary airman, administration, and statistical procedures; veterinary microbiology, consumer-level quality…

Drinking water consumption patterns in Canadian communities (2001-2007).

PubMed

Roche, S M; Jones, A Q; Majowicz, S E; McEwen, S A; Pintar, K D M

2012-03-01

A pooled analysis of seven cross-sectional studies from Newfoundland and Labrador, Waterloo and Hamilton Regions, Ontario and Vancouver, East Kootenay and Northern Interior Regions, British Columbia (2001 to 2007) was performed to investigate the drinking water consumption patterns of Canadians and to identify factors associated with the volume of tap water consumed. The mean volume of tap water consumed was 1.2 L/day, with a large range (0.03 to 9.0 L/day). In-home water treatment and interactions between age and gender and age and bottled water use were significantly associated with the volume of tap water consumed in multivariable analyses. Approximately 25% (2,221/8,916) of participants were classified as bottled water users, meaning that 75% or more of their total daily drinking water intake was bottled. Approximately 48.6% (4,307/8,799) of participants used an in-home treatment method to treat their tap water for drinking purposes. This study provides a broader geographic perspective and more current estimates of Canadian water consumption patterns than previous studies. The identified factors associated with daily water consumption could be beneficial for risk assessors to identify individuals who may be at greater risk of waterborne illness.

Formulation of detailed consumables management models for the development (preoperational) period of advanced space transportation system. Volume 2: Consumables data base workbook

NASA Technical Reports Server (NTRS)

Zamora, M. A.

1976-01-01

The consumables characteristic data associated with the performance of the mission activities required by the mission planning processor are defined to calculate the consumables requirements. The activity data is defined in terms of discrete time periods having a distinct rate for each consumable required to support the performance of a given operation. The data is structured in a series of consumable data worksheets for each activity that includes a profile of its operations and the rate of each consumable required to support the given activity. The data worksheets provide for the uniform specification of consumables data, allows for the ready identification of the consumables affected by a given activity, and facilitates the updating process. An activity and the data that must be included in the data worksheets are defined and an example of its use and application the consumables data requirements for the performance of the EVA are presented.

Sugar Price Supports and Taxation

PubMed Central

Dilk, Abby; Savaiano, Dennis A.

2017-01-01

Domestic US sugar production has been protected by government policy for the past 82 years, resulting in elevated domestic prices and an estimated annual (2013) $1.4 billion dollar “tax” on consumers. These elevated prices and the simultaneous federal support for domestic corn production have ensured a strong market for high-fructose corn syrup. Americans have dramatically increased their consumption of caloric sweeteners during the same period. Consumption of “empty” calories (ie, foods with low-nutrient/high-caloric density)—sugar and high-fructose corn syrup being the primary sources—is considered by most public health experts to be a key contributing factor to the rise in obesity. There have been substantial efforts to tax sugar-sweetened beverages (SSBs) to both reduce consumption and provide a source of funds for nutrition education, thereby emulating the tobacco tax model. Volume-based SSB taxes levy the tax rate per ounce of liquid, where some are only imposed on beverages with added sugar content exceeding a set threshold. Nonetheless, volume-based taxes have significant limitations in encouraging consumers to reduce their caloric intake due to a lack of transparency at the point of purchase. Thus, it is hypothesized that point-of-purchase, nutrient-specific excise taxes on SSBs would be more effective at reducing sugar consumption. However, all SSB taxes are limited by the possibility that consumers may compensate their decreased intake from SSBs with other high-calorie junk foods. Furthermore, there are no existing studies to provide evidence on how SSB taxes will impact obesity rates in the long term. The paradox of sugar prices is that Americans have paid higher prices for sugar to protect domestic production for more than 80 years, and now, Americans are being asked to pay even more to promote public health. The effective use of sugar taxes should be considered based on their merits in reducing sugar consumption and making available a new source of funds to support nutrition education, not on lobbying efforts by the food industry or sugar and corn producers. PMID:28649143

Sugar Price Supports and Taxation: A Public Health Policy Paradox.

PubMed

Dilk, Abby; Savaiano, Dennis A

2017-05-01

Domestic US sugar production has been protected by government policy for the past 82 years, resulting in elevated domestic prices and an estimated annual (2013) $1.4 billion dollar "tax" on consumers. These elevated prices and the simultaneous federal support for domestic corn production have ensured a strong market for high-fructose corn syrup. Americans have dramatically increased their consumption of caloric sweeteners during the same period. Consumption of "empty" calories (ie, foods with low-nutrient/high-caloric density)-sugar and high-fructose corn syrup being the primary sources-is considered by most public health experts to be a key contributing factor to the rise in obesity. There have been substantial efforts to tax sugar-sweetened beverages (SSBs) to both reduce consumption and provide a source of funds for nutrition education, thereby emulating the tobacco tax model. Volume-based SSB taxes levy the tax rate per ounce of liquid, where some are only imposed on beverages with added sugar content exceeding a set threshold. Nonetheless, volume-based taxes have significant limitations in encouraging consumers to reduce their caloric intake due to a lack of transparency at the point of purchase. Thus, it is hypothesized that point-of-purchase, nutrient-specific excise taxes on SSBs would be more effective at reducing sugar consumption. However, all SSB taxes are limited by the possibility that consumers may compensate their decreased intake from SSBs with other high-calorie junk foods. Furthermore, there are no existing studies to provide evidence on how SSB taxes will impact obesity rates in the long term. The paradox of sugar prices is that Americans have paid higher prices for sugar to protect domestic production for more than 80 years, and now, Americans are being asked to pay even more to promote public health. The effective use of sugar taxes should be considered based on their merits in reducing sugar consumption and making available a new source of funds to support nutrition education, not on lobbying efforts by the food industry or sugar and corn producers.

Energy drink consumption and impact on caffeine risk.

PubMed

Thomson, Barbara M; Campbell, Donald M; Cressey, Peter; Egan, Ursula; Horn, Beverley

2014-01-01

The impact of caffeine from energy drinks occurs against a background exposure from naturally occurring caffeine (coffee, tea, cocoa and foods containing these ingredients) and caffeinated beverages (kola-type soft drinks). Background caffeine exposure, excluding energy drinks, was assessed for six New Zealand population groups aged 15 years and over (n = 4503) by combining concentration data for 53 caffeine-containing foods with consumption information from the 2008/09 New Zealand Adult Nutrition Survey (ANS). Caffeine exposure for those who consumed energy drinks (n = 138) was similarly assessed, with inclusion of energy drinks. Forty-seven energy drink products were identified on the New Zealand market in 2010. Product volumes ranged from 30 to 600 ml per unit, resulting in exposures of 10-300 mg caffeine per retail unit consumed. A small percentage, 3.1%, of New Zealanders reported consuming energy drinks, with most energy drink consumers (110/138) drinking one serving per 24 h. The maximum number of energy drinks consumed per 24 h was 14 (total caffeine of 390 mg). A high degree of brand loyalty was evident. Since only a minor proportion of New Zealanders reported consuming energy drinks, a greater number of New Zealanders exceeded a potentially adverse effect level (AEL) of 3 mg kg(-1) bw day(-1) for caffeine from caffeine-containing foods than from energy drinks. Energy drink consumption is not a risk at a population level because of the low prevalence of consumption. At an individual level, however, teenagers, adults (20-64 years) and females (16-44 years) were more likely to exceed the AEL by consuming energy drinks in combination with caffeine-containing foods.

Consumption patterns of sweet drinks in a population of Australian children and adolescents (2003-2008).

PubMed

Jensen, Britt W; Nichols, Melanie; Allender, Steven; de Silva-Sanigorski, Andrea; Millar, Lynne; Kremer, Peter; Lacy, Kathleen; Swinburn, Boyd

2012-09-12

Intake of sweet drinks has previously been associated with the development of overweight and obesity among children and adolescents. The present study aimed to assess the consumption pattern of sweet drinks in a population of children and adolescents in Victoria, Australia. Data on 1,604 children and adolescents (4-18 years) from the comparison groups of two quasi-experimental intervention studies from Victoria, Australia were analysed. Sweet drink consumption (soft drink and fruit juice/cordial) was assessed as one day's intake and typical intake over the last week or month at two time points between 2003 and 2008 (mean time between measurement: 2.2 years). Assessed using dietary recalls, more than 70% of the children and adolescents consumed sweet drinks, with no difference between age groups (p = 0.28). The median intake among consumers was 500 ml and almost a third consumed more than 750 ml per day. More children and adolescents consumed fruit juice/cordial (69%) than soft drink (33%) (p < 0.0001) and in larger volumes (median intake fruit juice/cordial: 500 ml and soft drink: 375 ml). Secular changes in sweet drink consumption were observed with a lower proportion of children and adolescents consuming sweet drinks at time 2 compared to time 1 (significant for age group 8 to <10 years, p = 0.001). The proportion of Australian children and adolescents from the state of Victoria consuming sweet drinks has been stable or decreasing, although a high proportion of this sample consumed sweet drinks, especially fruit juice/cordial at both time points.

Blood volume analysis: a new technique and new clinical interest reinvigorate a classic study.

PubMed

Manzone, Timothy A; Dam, Hung Q; Soltis, Daniel; Sagar, Vidya V

2007-06-01

Blood volume studies using the indicator dilution technique and radioactive tracers have been performed in nuclear medicine departments for over 50 y. A nuclear medicine study is the gold standard for blood volume measurement, but the classic dual-isotope blood volume study is time-consuming and can be prone to technical errors. Moreover, a lack of normal values and a rubric for interpretation made volume status measurement of limited interest to most clinicians other than some hematologists. A new semiautomated system for blood volume analysis is now available and provides highly accurate results for blood volume analysis within only 90 min. The availability of rapid, accurate blood volume analysis has brought about a surge of clinical interest in using blood volume data for clinical management. Blood volume analysis, long a low-volume nuclear medicine study all but abandoned in some laboratories, is poised to enter the clinical mainstream. This article will first present the fundamental principles of fluid balance and the clinical means of volume status assessment. We will then review the indicator dilution technique and how it is used in nuclear medicine blood volume studies. We will present an overview of the new semiautomated blood volume analysis technique, showing how the study is done, how it works, what results are provided, and how those results are interpreted. Finally, we will look at some of the emerging areas in which data from blood volume analysis can improve patient care. The reader will gain an understanding of the principles underlying blood volume assessment, know how current nuclear medicine blood volume analysis studies are performed, and appreciate their potential clinical impact.

Design and high-volume manufacture of low-cost molded IR aspheres for personal thermal imaging devices

NASA Astrophysics Data System (ADS)

Zelazny, A. L.; Walsh, K. F.; Deegan, J. P.; Bundschuh, B.; Patton, E. K.

2015-05-01

The demand for infrared optical elements, particularly those made of chalcogenide materials, is rapidly increasing as thermal imaging becomes affordable to the consumer. The use of these materials in conjunction with established lens manufacturing techniques presents unique challenges relative to the cost sensitive nature of this new market. We explore the process from design to manufacture, and discuss the technical challenges involved. Additionally, facets of the development process including manufacturing logistics, packaging, supply chain management, and qualification are discussed.

High adherence is necessary to realize health gains from water quality interventions.

PubMed

Brown, Joe; Clasen, Thomas

2012-01-01

Safe drinking water is critical for health. Household water treatment (HWT) has been recommended for improving access to potable water where existing sources are unsafe. Reports of low adherence to HWT may limit the usefulness of this approach, however. We constructed a quantitative microbial risk model to predict gains in health attributable to water quality interventions based on a range of assumptions about pre-treatment water quality; treatment effectiveness in reducing bacteria, viruses, and protozoan parasites; adherence to treatment interventions; volume of water consumed per person per day; and other variables. According to mean estimates, greater than 500 DALYs may be averted per 100,000 person-years with increased access to safe water, assuming moderately poor pre-treatment water quality that is a source of risk and high treatment adherence (>90% of water consumed is treated). A decline in adherence from 100% to 90% reduces predicted health gains by up to 96%, with sharpest declines when pre-treatment water quality is of higher risk. Results suggest that high adherence is essential in order to realize potential health gains from HWT.

High Adherence Is Necessary to Realize Health Gains from Water Quality Interventions

PubMed Central

Brown, Joe; Clasen, Thomas

2012-01-01

Background Safe drinking water is critical for health. Household water treatment (HWT) has been recommended for improving access to potable water where existing sources are unsafe. Reports of low adherence to HWT may limit the usefulness of this approach, however. Methods and Findings We constructed a quantitative microbial risk model to predict gains in health attributable to water quality interventions based on a range of assumptions about pre-treatment water quality; treatment effectiveness in reducing bacteria, viruses, and protozoan parasites; adherence to treatment interventions; volume of water consumed per person per day; and other variables. According to mean estimates, greater than 500 DALYs may be averted per 100,000 person-years with increased access to safe water, assuming moderately poor pre-treatment water quality that is a source of risk and high treatment adherence (>90% of water consumed is treated). A decline in adherence from 100% to 90% reduces predicted health gains by up to 96%, with sharpest declines when pre-treatment water quality is of higher risk. Conclusions Results suggest that high adherence is essential in order to realize potential health gains from HWT. PMID:22586491

Automated linking of suspicious findings between automated 3D breast ultrasound volumes

NASA Astrophysics Data System (ADS)

Gubern-Mérida, Albert; Tan, Tao; van Zelst, Jan; Mann, Ritse M.; Karssemeijer, Nico

2016-03-01

Automated breast ultrasound (ABUS) is a 3D imaging technique which is rapidly emerging as a safe and relatively inexpensive modality for screening of women with dense breasts. However, reading ABUS examinations is very time consuming task since radiologists need to manually identify suspicious findings in all the different ABUS volumes available for each patient. Image analysis techniques to automatically link findings across volumes are required to speed up clinical workflow and make ABUS screening more efficient. In this study, we propose an automated system to, given the location in the ABUS volume being inspected (source), find the corresponding location in a target volume. The target volume can be a different view of the same study or the same view from a prior examination. The algorithm was evaluated using 118 linkages between suspicious abnormalities annotated in a dataset of ABUS images of 27 patients participating in a high risk screening program. The distance between the predicted location and the center of the annotated lesion in the target volume was computed for evaluation. The mean ± stdev and median distance error achieved by the presented algorithm for linkages between volumes of the same study was 7.75±6.71 mm and 5.16 mm, respectively. The performance was 9.54±7.87 and 8.00 mm (mean ± stdev and median) for linkages between volumes from current and prior examinations. The proposed approach has the potential to minimize user interaction for finding correspondences among ABUS volumes.

Cost drivers in total hip arthroplasty: effects of procedure volume and implant selling price.

PubMed

Kelly, Michael P; Bozic, Kevin J

2009-01-01

Total hip arthroplasty (THA), though a highly effective procedure for patients with end-stage hip disease, has become increasingly costly, both because of increasing procedure volume and because of the introduction and widespread use of new technologies. Data regarding procedure volume and procedure costs for THA were obtained from the National Inpatient Sample and other published sources for the years 1995 through 2005. Procedure volume increased 61% over the period studied. When adjusted for inflation, using the medical consumer price index, the average selling price of THA implants increased 24%. The selling price of THA implants as a percentage of total procedure costs increased from 29% to 60% during the period under study. The increasing cost of THA in the United States is a result of both increased procedure volume and increased cost of THA implants. No long-term outcome studies related to use of new implant technologies are available, and short-term results have been similar to those obtained with previous generations of THA implants. This study reinforces the need for a US total joint arthroplasty registry and for careful clinical and economic analyses of new technologies in orthopedics.

Drinker Types, Harm, and Policy-Related Variables: Results from the 2011 International Alcohol Control Study in New Zealand.

PubMed

Wall, Martin; Casswell, Sally

2017-05-01

The aim was to identify a typology of drinkers in New Zealand based on alcohol consumption, beverage choice, and public versus private drinking locations and investigate the relationship between drinker types, harms experienced, and policy-related variables. Model-based cluster analysis of male and female drinkers including volumes of alcohol consumed in the form of beer, wine, spirits, and ready-to-drinks (RTDs) in off- and on-premise settings. Cluster membership was then related to harm measures: alcohol dependence, self-rated health; and to 3 policy-relevant variables: liking for alcohol adverts, price paid for alcohol, and time of purchase. Males and females were analyzed separately. Men fell into 4 and women into 14 clearly discriminated clusters. The male clusters consumed a relatively high proportion of alcohol in the form of beer. Women had a number of small extreme clusters and some consumed mainly spirits-based RTDs, while others drank mainly wine. Those in the higher consuming clusters were more likely to have signs of alcohol dependency, to report lower satisfaction with their health, to like alcohol ads, and to have purchased late at night. Consumption patterns are sufficiently distinctive to identify typologies of male and female alcohol consumers. Women drinkers are more heterogeneous than men. The clusters relate differently to policy-related variables. Copyright © 2017 by the Research Society on Alcoholism.

Divergent drinking patterns and factors affecting homemade alcohol consumption (the case of Russia).

PubMed

Radaev, Vadim

2016-08-01

Unrecorded homemade alcohol consumption has been less examined in the literature. Previous studies of homemade alcohol in Russia have almost entirely focused upon the use of samogon (moonshine) attributed to the northern style of drinking. No systematic analysis is available regarding the production and consumption of homemade wine. This paper explores the drinking patterns demonstrated by consumers of samogon and homemade wine in Russia. The main factors affecting the consumption of these beverages are investigated. Data were collected from a 2014 nationwide survey of 14,986 respondents aged 15+ years. Beverage preferences, volume of consumed alcohol, drinking habits, and alcohol availability were the main measures reported. Demographic, socio-economic, spatial, and policy-related factors affecting homemade alcohol consumption are examined using logistic regression. The percentages of samogon and homemade wine consumers were similar, although a greater volume of samogon in pure alcohol was consumed compared to homemade wine. The groups of samogon and homemade wine consumers showed very little overlap. Unlike homemade wine consumers, samogon drinkers consumed larger amounts of alcohol and were more engaged in frequent and excessive drinking, drinking without meals and drinking in marginal public settings. Gender, education, regional affiliation, and type of residence showed opposite associations with regard to the consumption of samogon and homemade wine. Availability of homemade alcohol in the neighbourhood was the most influential predictor due to respondents' own production, presence of homemade alcohol in friendship networks and at illegal market. The prices of manufactured alcohol and the consumption of homemade alcohol did not show significant relationships. Consumers of samogon and homemade wine demonstrate contrasting drinking patterns that are largely driven by different factors. Samogon is consumed in a more hazardous manner, whereas homemade wine is consumed in a more moderate and law-abiding way. Illegal commercial samogon should be a special concern for alcohol policy. Copyright © 2016. Published by Elsevier B.V.

Impacts of Outer Continental Shelf (OCS) development on recreation and tourism. Volume 4. User's manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The final report for the project is presented in five volumes. The project sought to determine the impact of Outer Continental Shelf development on recreation and tourism in California. This volume is the User's Guide. It includes the following topics: Introduction and Summary Guide; Input Data Files; Gravity Model Programs; Economic Effects Model Programs; Consumer Surplus Model Programs; References; and Appendices.

Consumer Economics (Secondary): Teaching Strategies. Master Curriculum Guide in Economics.

ERIC Educational Resources Information Center

Clow, John E., Ed.

Designed to build up concepts presented in the Master Curriculum Guide volume "A Framework for Teaching the Basic Concepts," this collection of teacher guidelines and classroom lessons focuses on how economic concepts and an economic way of thinking can be incorporated into various units in consumer education courses or in courses at the secondary…

Consumer Exposure to Bisphenol A from Plastic Bottles

ERIC Educational Resources Information Center

Bidabadi, Fatemeh

2013-01-01

Bisphenol A (BPA) is a plastic monomer and plasticizer and is a chemical that has one of the highest volume production worldwide, with more than six billion pounds each year. Its primary use is the production of polycarbonate plastics, epoxy resins used to line metal cans in a host of plastic consumer products such as toys, water pipes, drinking…

National Childcare Consumer Study: 1975. Volume IV: Supplemental Documentation.

ERIC Educational Resources Information Center

Unco, Inc., Washington, DC.

This document is the fourth and final report of a study sponsored by the Office of Child Development of the U.S. Department of Health, Education and Welfare to determine patterns of child care usage and related consumer preferences, attitudes and opinions about child care. The study was based on 4609 personal interviews conducted in 1975 from a…

Studies in Environment--Volume IV: Consumption Differentials and the Environment.

ERIC Educational Resources Information Center

Olsen, Mary Beth; And Others

In this study, a mathematical model is used to tie both direct and indirect industrial pollution generated by fluctuations of the entire economy to behavioral patterns of the consuming public. The model studies consumer behavior patterns from three viewpoints: income of family, age of head of family, and regional location of family within the…

American Council on Consumer Interests Annual Conference (35th, Baltimore, Maryland, March 29-April 1, 1989). The Proceedings.

ERIC Educational Resources Information Center

Carsky, Mary L., Ed.

Among the 90 papers in this volume, education-related titles are as follows: "The Colston Warne Legacy" (Peterson); "Keeping a File on Survey Respondents" (Huang); "Aging-in-Place: Are Responses in the Best Interest of Elderly Consumers?" (Stum); "Low-Income Elderly in Health Maintenance Organizations:…

Market trends in the projection display industry

NASA Astrophysics Data System (ADS)

Dash, Sweta

2001-03-01

The projection display industry represents a multibillion- dollar market that includes four distinct technologies. High-volume consumer products and high-value business products drive the market, with different technologies being used in different application markets. The consumer market is dominated by rear CRT technology, especially in the projection TV segment. Rear LCD (liquid crystal display), MEMS/DLP (or Digital Light Processing TM) and LCOS (Liquid-crystal-on-silicon) TVs are slowly emerging as future competitors to rear CRT projectors. Front CRT projectors are also facing challenges from LCD and DLP technology for the home theater market while the business market is completely dominated by front LCD and DLP technology. Three-chip DLP projectors have replaced liquid crystal light valves in large venue applications where projectors have higher light output requirements. In recent years front LCD and LCOS projectors have been increasingly competing with 3-chip DLP projectors especially at the low end of the large venue application market. Within the next five years the projection market will experience very fast growth. Sales and presentation applications, which are the fastest growing applications in the business market, will continue to be the major driving force for the growth for front projectors, and the shift in the consumer market to digital and HDTV products will drive the rear projection market.

Energy density effects on food intake, appetite ratings, and loss of control in women with binge eating disorder and weight-matched controls.

PubMed

Latner, Janet D; Rosewall, Juliet K; Chisholm, Amy M

2008-08-01

Individuals with binge eating disorder have increased gastric capacity and may require excessive food intake and increased volume in the stomach to produce satiation. The present study examined whether lower energy density (ED) meals lead to lower energy intake more than higher-ED meals in women with binge eating disorder (BED) and weight-matched controls. Women with BED (n=15) and healthy weight-matched controls (n=15) were instructed to consume as much as they wished during two test meals on non-consecutive days. Participants were served two hedonically similar versions of a pasta salad (19% protein, 50% carbohydrate, 31% fat): low-ED (1.0 kcal/g) and high-ED (1.6 kcal/g), and food intake and appetite ratings were assessed. Energy intake was significantly lower in the low-ED condition than in the high-ED condition across all participants. BED participants were more likely to report greater prospective consumption, desire for dessert, loss of control over eating, and less enjoyment after meals. Decreasing the energy density of food consumed may help target disturbances in satiation in women with frequent binge eating.

A Stochastic Spiking Neural Network for Virtual Screening.

PubMed

Morro, A; Canals, V; Oliver, A; Alomar, M L; Galan-Prado, F; Ballester, P J; Rossello, J L

2018-04-01

Virtual screening (VS) has become a key computational tool in early drug design and screening performance is of high relevance due to the large volume of data that must be processed to identify molecules with the sought activity-related pattern. At the same time, the hardware implementations of spiking neural networks (SNNs) arise as an emerging computing technique that can be applied to parallelize processes that normally present a high cost in terms of computing time and power. Consequently, SNN represents an attractive alternative to perform time-consuming processing tasks, such as VS. In this brief, we present a smart stochastic spiking neural architecture that implements the ultrafast shape recognition (USR) algorithm achieving two order of magnitude of speed improvement with respect to USR software implementations. The neural system is implemented in hardware using field-programmable gate arrays allowing a highly parallelized USR implementation. The results show that, due to the high parallelization of the system, millions of compounds can be checked in reasonable times. From these results, we can state that the proposed architecture arises as a feasible methodology to efficiently enhance time-consuming data-mining processes such as 3-D molecular similarity search.

Exploring Tradeoffs in Demand-side and Supply-side Management of Urban Water Resources using Agent-based Modeling and Evolutionary Computation

NASA Astrophysics Data System (ADS)

Kanta, L.; Berglund, E. Z.

2015-12-01

Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS) framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger (1) increases in the volume of water pumped through inter-basin transfers from an external reservoir and (2) drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

Volume reduction of hot cell plastic wastes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dykes, F W; Henscheid, J P; Lewis, L C

1989-09-19

The disposal of radioactively-contaminated solid wastes has become a national crisis. In such circumstances, it is imperative that this waste be reduced to minimum volume and be packaged to prevent pollution of the environment. The majority of the solid waste generated at the hot cell under consideration is plastic lab ware. Cutting this waste into small pieces with a hot wire technique reduced the volume 66%. Melting the waste, although more time consuming, reduced the volume 90%. The hot wire technique can also be used to cut up damaged master slave manipulator boots, greatly reducing their disposal volume.

Positive effect of reduced aeration rate on growth and stereospecificity of DL-malic acid consumption by Azospirillum brasilense: improving the shelf life of a liquid inoculant formulation.

PubMed

Carrasco-Espinosa, Karen; García-Cabrera, Ramsés I; Bedoya-López, Andrea; Trujillo-Roldán, Mauricio A; Valdez-Cruz, Norma A

2015-02-10

Azospirillum brasilense has significance as a growth promoter in plants of commercial interest. Two industrial native strains (Start and Calf), used as a part of an inoculant formulation in Mexico during the last 15 years, were incubated in laboratory-scale pneumatic bioreactors at different aeration rates. In both strains, the positive effect of decreased aeration was observed. At the lowest (0.1 vvm, air volume/liquid volume×minute), the highest biomass were obtained for Calf (7.8 × 10(10)CFU/ml), and Start (2.9 × 10(9)CFU/ml). These were higher in one magnitude order compared to cultures carried out at 0.5 vvm, and two compared to those at 1.0 vvm. At lower aeration, both stereoisomeric forms of malic acid were consumed, but at higher aeration, just L-malate was consumed. A reduction in aeration allows an increase of the shelf life and the microorganism saved higher concentrations of polyhydroxybutyrate. The selected fermentation conditions are closely related to those prevalent in large-scale bioreactors and offer the possibility of achieving high biomass titles with high shelf life at a reduced costs, due to the complete use of a carbon source at low aeration of a low cost raw material as DL-malic acid mixture in comparison with the L-malic acid stereoisomer. Copyright © 2015 Elsevier B.V. All rights reserved.

Firm strategy and consumer behaviour under a complex tobacco tax system: implications for the effectiveness of taxation on tobacco control.

PubMed

Atuk, Oğuz; Özmen, M Utku

2017-05-01

The current tobacco taxation scheme in Turkey, a mix of high ad valorem tax and low specific tax, contains incentives for firms and consumers to change pricing and consumption patterns, respectively. The association between tax structure and price and tax revenue stability has not been studied in detail with micro data containing price segment information. In this study, we analyse whether incentives for firms and consumers undermine the effectiveness of tax policy in reducing consumption. We calculate alternative taxation scheme outcomes using differing ad valorem and specific tax rates through simulation analysis. We also estimate price elasticity of demand using detailed price and volume statistics between segments via regression analysis. A very high ad valorem rate provides strong incentives to firms to reduce prices. Therefore, this sort of tax strategy may induce even more consumption despite its initial aim of discouraging consumption. While higher prices dramatically reduce consumption of economy and medium price segment cigarettes, demand for premium segment cigarettes is found to be highly price-inelastic. The current tax scheme, based on both ad valorem and specific components, introduces various incentives to firms as well as to consumers which reduce the effectiveness of the tax policy. Therefore, on the basis of our theoretical predictions, an appropriate tax scheme should involve a balanced combination of ad valorem and specific rates, away from extreme ( ad valorem or specific dominant) cases to enhance the effectiveness of tax policy for curbing consumption. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Ad libitum fluid consumption via self- or external administration.

PubMed

Yeargin, Susan W; Finn, Megan E; Eberman, Lindsey E; Gage, Matthew J; McDermott, Brendon P; Niemann, Andrew

2015-01-01

During team athletic events, athletic trainers commonly provide fluids with water bottles. When a limited number of water bottles exist, various techniques are used to deliver fluids. To determine whether fluid delivered via water-bottle administration influenced fluid consumption and hydration status. Crossover study. Outdoor field (22.2°C ± 3.5°C). Nineteen participants (14 men, 5 women, age = 30 ± 10 years, height = 176 ± 8 cm, mass = 72.5 ± 10 kg) were recruited from the university and local running clubs. The independent variable was fluid delivery with 3 levels: self-administration with mouth-to-bottle direct contact (SA-DC), self-administration with no contact between mouth and bottle (SA-NC), and external administration with no contact between the mouth and the bottle (EA-NC). Participants warmed up for 10 minutes before completing 5 exercise stations, after which an ad libitum fluid break was given, for a total of 6 breaks. We measured the fluid variables of total volume consumed, total number of squirts, and average volume per squirt. Hydration status via urine osmolality and body-mass loss, and perceptual variables for thirst and fullness were recorded. We calculated repeated-measures analyses of variance to assess hydration status, fluid variables, and perceptual measures to analyze conditions across time. The total volume consumed for EA-NC was lower than for SA-DC (P = .001) and SA-NC (P = .001). The total number of squirts for SA-DC was lower than for SA-NC (P = .009). The average volume per squirt for EA-NC was lower than for SA-DC (P = .020) and SA-NC (P = .009). Participants arrived (601.0 ± 21.3 mOsm/L) and remained (622.3 ± 38.3 mOsm/L) hydrated, with no difference between conditions (P = .544); however, the EA-NC condition lost more body mass than did the SA-DC condition (P = .001). There was no main effect for condition on thirst (P = .147) or fullness (P = .475). External administration of fluid decreased total volume consumed via a decreased average volume per squirt. The SA-DC method requires fewer squirts within a specific time frame. Fluid breaks every 15 minutes resulted in maintenance of euhydration; however, loss of body mass was influenced by fluid administration. Athletic trainers should avoid external administration to promote positive hydration behaviors. When fluid is self-administered, individual bottles may be the best clinical practice because more volume can be consumed per squirt.

High-Precision Phenotyping of Grape Bunch Architecture Using Fast 3D Sensor and Automation.

PubMed

Rist, Florian; Herzog, Katja; Mack, Jenny; Richter, Robert; Steinhage, Volker; Töpfer, Reinhard

2018-03-02

Wine growers prefer cultivars with looser bunch architecture because of the decreased risk for bunch rot. As a consequence, grapevine breeders have to select seedlings and new cultivars with regard to appropriate bunch traits. Bunch architecture is a mosaic of different single traits which makes phenotyping labor-intensive and time-consuming. In the present study, a fast and high-precision phenotyping pipeline was developed. The optical sensor Artec Spider 3D scanner (Artec 3D, L-1466, Luxembourg) was used to generate dense 3D point clouds of grapevine bunches under lab conditions and an automated analysis software called 3D-Bunch-Tool was developed to extract different single 3D bunch traits, i.e., the number of berries, berry diameter, single berry volume, total volume of berries, convex hull volume of grapes, bunch width and bunch length. The method was validated on whole bunches of different grapevine cultivars and phenotypic variable breeding material. Reliable phenotypic data were obtained which show high significant correlations (up to r² = 0.95 for berry number) compared to ground truth data. Moreover, it was shown that the Artec Spider can be used directly in the field where achieved data show comparable precision with regard to the lab application. This non-invasive and non-contact field application facilitates the first high-precision phenotyping pipeline based on 3D bunch traits in large plant sets.

Effect of carbohydrate composition on fluid balance, gastric emptying, and exercise performance.

PubMed

Cole, K J; Grandjean, P W; Sobszak, R J; Mitchell, J B

1993-12-01

This study examined the effects of serial feedings of different carbohydrate (CHO) solutions on plasma volume, gastric emptying (GE), and performance during prolonged cycling exercise. Solutions containing 6 g% glucose-sucrose (CHO-6GS), 8.3 g% high fructose corn syrup (CHO-8HF), 6.3 g% high fructose corn syrup + 2 g% glucose polymer (CHO-8HP), and a water placebo (WP) were compared. Ten trained male cyclists performed four cycling trials consisting of 105 min at 70% VO2max followed by a 15-min all-out, self-paced performance ride. Every 15 min the men consumed one of the four test solutions. Blood samples were taken before, during, and after exercise to determine blood glucose and plasma volume changes. There were no significant differences in performance, GE, or plasma volume changes between trials. Blood glucose was significantly elevated at the 105-min time-point in all CHO trials when compared to WP. The CHO-8HF and CHO-8HP drinks resulted in a significantly higher delivery of CHO to the intestine. Higher rates of CHO oxidation during the steady-state ride were observed only with the CHO-6GS drink.

Reference Pricing Changes The 'Choice Architecture' Of Health Care For Consumers.

PubMed

Robinson, James C; Brown, Timothy T; Whaley, Christopher

2017-03-01

Reference pricing in health insurance creates incentives for patients to select for nonemergency services providers that charge relatively low prices and still offer high quality of care. It changes the "choice architecture" by offering standard coverage if the patient chooses cost-effective providers but requires considerable consumer cost sharing if more expensive alternatives are selected. The short-term impact of reference pricing has been to shift patient volumes from hospital-based to freestanding surgical, diagnostic, imaging, and laboratory facilities. This article summarizes reference pricing's impacts to date on patient choice, provider prices, surgical complications, and employer spending and estimates its potential impacts if expanded to more services and a broader population. Reference pricing induces consumers to select lower-price alternatives for all of the forms of care studied, leading to significant reductions in prices paid and spending incurred by insurers and employers. The impact on consumer cost sharing is mixed, with some studies finding higher copayments and some lower. We conclude with a discussion of the incentives created for providers to redesign their clinical processes and for efficient providers to expand into price-sensitive markets. Over time, reference pricing may increase pressures for price competition and lead to further cost-reducing innovations in health care products and processes. Project HOPE—The People-to-People Health Foundation, Inc.

Over-the-Counter Hearing Aids: A Lost Decade for Change

PubMed Central

Chan, Zoe Yee Ting; McPherson, Bradley

2015-01-01

Background. Hearing aids sold directly to consumers in retail stores or through the internet, without individual prescription by audiological professionals, are termed over-the-counter (OTC) devices. This study aimed to determine whether there was any change in the electroacoustic characteristics of OTC devices compared to research carried out a decade earlier. The previous results indicated that most OTC devices were low-frequency-emphasis devices and were unsuitable for elderly people with presbycusis, who were likely to be the major consumers of these products. Methods. Ten OTC devices were selected and their electroacoustic performance was measured. Appropriate clients for the OTC devices were derived, using four linear prescription formulae, and OTC suitability for elderly persons with presbycusis was investigated. Results. OTC electroacoustic characteristics were similar to those in the earlier study. Most OTC devices were not acoustically appropriate for potential consumers with presbycusis. Although several of the devices could match prescriptive targets for individuals with presbycusis, their poor electroacoustic performance—including ineffective volume control function, high equivalent input noise, and irregular frequency response—may override their potential benefit. Conclusion. The low-cost OTC devices were generally not suitable for the main consumers of these products, and there has been little improvement in the appropriateness of these devices over the past decade. PMID:26557701

Consumption patterns of sweet drinks in a population of Australian children and adolescents (2003–2008)

PubMed Central

2012-01-01

Background Intake of sweet drinks has previously been associated with the development of overweight and obesity among children and adolescents. The present study aimed to assess the consumption pattern of sweet drinks in a population of children and adolescents in Victoria, Australia. Methods Data on 1,604 children and adolescents (4–18 years) from the comparison groups of two quasi-experimental intervention studies from Victoria, Australia were analysed. Sweet drink consumption (soft drink and fruit juice/cordial) was assessed as one day’s intake and typical intake over the last week or month at two time points between 2003 and 2008 (mean time between measurement: 2.2 years). Results Assessed using dietary recalls, more than 70% of the children and adolescents consumed sweet drinks, with no difference between age groups (p = 0.28). The median intake among consumers was 500 ml and almost a third consumed more than 750 ml per day. More children and adolescents consumed fruit juice/cordial (69%) than soft drink (33%) (p < 0.0001) and in larger volumes (median intake fruit juice/cordial: 500 ml and soft drink: 375 ml). Secular changes in sweet drink consumption were observed with a lower proportion of children and adolescents consuming sweet drinks at time 2 compared to time 1 (significant for age group 8 to <10 years, p = 0.001). Conclusion The proportion of Australian children and adolescents from the state of Victoria consuming sweet drinks has been stable or decreasing, although a high proportion of this sample consumed sweet drinks, especially fruit juice/cordial at both time points. PMID:22966937

Effect of volume of milk consumed on the attenuation of exercise-induced muscle damage.

PubMed

Cockburn, Emma; Robson-Ansley, Paula; Hayes, Philip R; Stevenson, Emma

2012-09-01

Exercise-induced muscle damage (EIMD) leads to decrements in muscle performance, increases in intramuscular proteins and delayed-onset of muscle soreness (DOMS). Previous research demonstrated that one litre of milk-based protein-carbohydrate (CHO) consumed immediately following muscle damaging exercise can limit changes in markers of EIMD possibly due to attenuating protein degradation and/or increasing protein synthesis. If the attenuation of EIMD is derived from changes in protein metabolism then it can be hypothesised that consuming a smaller volume of CHO and protein will elicit similar effects. Three independent matched groups of 8 males consumed 500 mL of milk, 1,000 mL of milk or a placebo immediately following muscle damaging exercise. Passive and active DOMS, isokinetic muscle performance, creatine kinase (CK), myoglobin and interleukin-6 were assessed immediately before and 24, 48 and 72 h after EIMD. After 72 h 1,000 mL of milk had a likely benefit for limiting decrements in peak torque compared to the placebo. After 48 h, 1,000 mL of milk had a very likely benefit of limiting increases in CK in comparison to the placebo. There were no differences between consuming 500 or 1,000 mL of milk for changes in peak torque and CK. In conclusion, decrements in isokinetic muscle performance and increases in CK can be limited with the consumption of 500 mL of milk.

Body Weight, Serum Sodium Levels, and Renal Function in an Ultra-Distance Mountain Run.

PubMed

Scotney, Bianca; Reid, Steve

2015-07-01

To determine body weight and serum [Na] changes in runners completing an 85-km mountain run, particularly with reference to their "in-race" hydration protocols. Prospective observational cohort study. Cradle Mountain Run, Tasmania, Australia, February 2011. Forty-four runners (86% of starters) prospectively enrolled, with 41 runners (80% of starters) eligible for inclusion in final data set. Body weight change, serum sodium concentration change, and hydration plan (according to thirst vs preplanned fluid consumption). There was 1 case of exercise-associated hyponatremia (EAH) [postrace [Na], 132 mmol/L]. This runner was asymptomatic. There was a strongly significant correlation between the change in serum [Na] and body weight change during the race. There was a significant inverse correlation between serum [Na] and volume of fluid consumed. Change of serum [Na] was not correlated with the proportion of water versus electrolyte drink consumed. Runners drinking to thirst consumed significantly lower average fluid volumes and had higher postrace serum [Na] than those complying with a preplanned hydration protocol (142 mmol/L vs 139 mmol/L). More experienced runners tended to drink to thirst. There was a 2% incidence of EAH in this study. Serum [Na] change during an 85-km mountain run was inversely correlated with the volume of fluid consumed. The results provide further evidence that EAH is a dilutional hyponatremia caused by excessive consumption of hypotonic fluids. Drinking to thirst represents a safe hydration strategy for runners in a wilderness environment. Drinking to thirst during endurance running events should be promoted as a safe hydration practice.

Learning from Consumer-Oriented Review Efforts To Guide the Development of a System of Expert Panels To Identify and Share Promising and Exemplary Products and Programs. Working Papers. Volumes One and Two.

ERIC Educational Resources Information Center

Office of Educational Research and Improvement (ED), Washington, DC. Office of Reform Assistance and Dissemination.

These volumes contain working papers related to the development of the Office of Educational Research and Improvement (OERI) Facilitated System of Expert Panels. Introductory papers by Susan Klein, Michael Scriven, Sharon Bobbitt and Susan Klein, and Michael Scriven and Lois-ellin Datta (printed in both volumes) set the stage for the discussions…

Food habits of Nyctinomops macrotis at a maternity roost in New Mexico, as indicated by analysis of guano

USGS Publications Warehouse

Sparks, D.W.; Valdez, E.W.

2003-01-01

We examined 56 fecal pellets from under a maternity colony of big free-tailed bats (Nyctinomops macrotis) in the Jemez Mountains of northern New Mexico. The most important food items, listed in order of decreasing percent volume, were Cicadellidae, leafhoppers (26.7% volume, 58.9% frequency); Ichneumonidae, Ichneumon wasps (19.3% volume, 35.7% frequency); and Lepidoptera, moths (17.2% volume, 82.1% frequency). Overall, the most important orders as prey consumed, listed by decreasing percent volume, were Homoptera (27.6% volume, 62.5% frequency), Hymenoptera (19.5% volume, 37.5% frequency), Lepidoptera (17.2% volume, 82.1% frequency), Hemiptera (11.7% volume, 37.5% frequency), and Diptera (10.6% volume, 50.0% frequency). Our study documents an unusually varied diet, as previous studies indicated that these bats fed almost exclusively on moths.

Automatic segmentation for detecting uterine fibroid regions treated with MR-guided high intensity focused ultrasound (MR-HIFU).

PubMed

Antila, Kari; Nieminen, Heikki J; Sequeiros, Roberto Blanco; Ehnholm, Gösta

2014-07-01

Up to 25% of women suffer from uterine fibroids (UF) that cause infertility, pain, and discomfort. MR-guided high intensity focused ultrasound (MR-HIFU) is an emerging technique for noninvasive, computer-guided thermal ablation of UFs. The volume of induced necrosis is a predictor of the success of the treatment. However, accurate volume assessment by hand can be time consuming, and quick tools produce biased results. Therefore, fast and reliable tools are required in order to estimate the technical treatment outcome during the therapy event so as to predict symptom relief. A novel technique has been developed for the segmentation and volume assessment of the treated region. Conventional algorithms typically require user interaction ora priori knowledge of the target. The developed algorithm exploits the treatment plan, the coordinates of the intended ablation, for fully automatic segmentation with no user input. A good similarity to an expert-segmented manual reference was achieved (Dice similarity coefficient = 0.880 ± 0.074). The average automatic segmentation time was 1.6 ± 0.7 min per patient against an order of tens of minutes when done manually. The results suggest that the segmentation algorithm developed, requiring no user-input, provides a feasible and practical approach for the automatic evaluation of the boundary and volume of the HIFU-treated region.

Sugary drink consumption and dental caries in New South Wales teenagers.

PubMed

Skinner, J; Byun, R; Blinkhorn, A; Johnson, G

2015-06-01

The consumption of water, milk and various sugary drinks and their relationship with the caries experience of a random sample of teenagers aged 14 to 15 years living in New South Wales, Australia was investigated. Data were obtained from both clinical and questionnaire components of the NSW Teen Dental Survey, 2010. The analyses allowed for various demographic and behavioural risk factors using caries experience (DMFT >0) and mean DMFT as the key outcome variables. Males were more likely than females to consume large volumes of sugary drinks. Consuming two or more glasses of sugary drinks per day led to significantly increased caries experience amongst this sample of 14 and 15 year olds. Factors found to be associated with elevated sugary drink consumption included family income, gender, and mother's education level. There is a strong correlation between increased caries experience of NSW teenagers and high levels of consumption of sugary drinks. © 2015 Australian Dental Association.

A Practical Approach to Spatiotemporal Data Compression

NASA Astrophysics Data System (ADS)

Prudden, Rachel; Robinson, Niall; Arribas, Alberto

2017-04-01

Datasets representing the world around us are becoming ever more unwieldy as data volumes grow. This is largely due to increased measurement and modelling resolution, but the problem is often exacerbated when data are stored at spuriously high precisions. In an effort to facilitate analysis of these datasets, computationally intensive calculations are increasingly being performed on specialised remote servers before the reduced data are transferred to the consumer. Due to bandwidth limitations, this often means data are displayed as simple 2D data visualisations, such as scatter plots or images. We present here a novel way to efficiently encode and transmit 4D data fields on-demand so that they can be locally visualised and interrogated. This nascent "4D video" format allows us to more flexibly move the boundary between data server and consumer client. However, it has applications beyond purely scientific visualisation, in the transmission of data to virtual and augmented reality.

Development of height-volume relationships in second growth Abies grandis for use with aerial LiDAR

Treesearch

Wade T. Tinkham; Alistair M. S. Smith; David L. R. Affleck; Jarred D. Saralecos; Michael J. Falkowski; Chad M. Hoffman; Andrew T. Hudak; Michael A. Wulder

2016-01-01

Following typical forest inventory protocols, individual tree volume estimates are generally derived via diameter-at-breast-height (DBH)-based allometry. Although effective, measurement of DBH is time consuming and potentially a costly element in forest inventories. The capacity of airborne light detection and ranging (LiDAR) to provide individual tree-level...

Methamphetamine drinking microstructure in mice bred to drink high or low amounts of methamphetamine

PubMed Central

Eastwood, Emily C.; Barkley-Levenson, Amanda M.; Phillips, Tamara J.

2014-01-01

Genetic factors likely influence individual sensitivity to positive and negative effects of methamphetamine (MA) and risk for MA dependence. Genetic influence on MA consumption has been confirmed by selectively breeding mouse lines to consume high (MAHDR) or low (MALDR) amounts of MA, using a two-bottle choice MA drinking (MADR) procedure. Here, we employed a lickometer system to characterize the microstructure of MA (20, 40, and 80 mg/l) and water intake in MAHDR and MALDR mice in 4-h limited access sessions, during the initial 4 hours of the dark phase of their 12:12 h light:dark cycle. Licks at one-minute intervals and total volume consumed were recorded, and bout analysis was performed. MAHDR and MALDR mice consumed similar amounts of MA in mg/kg on the first day of access, but MAHDR mice consumed significantly more MA than MALDR mice during all subsequent sessions. The higher MA intake of MAHDR mice was associated with a larger number of MA bouts, longer bout duration, shorter interbout interval, and shorter latency to the first bout. In a separate 4-h limited access MA drinking study, MALDR and MAHDR mice had similar blood MA levels on the first day MA was offered, but MAHDR mice had higher blood MA levels on all subsequent days, which corresponded with MA intake. These data provide insight into the microstructure of MA intake in an animal model of differential genetic risk for MA consumption, which may be pertinent to MA use patterns relevant to genetic risk for MA dependence. PMID:24978098

16 CFR Appendix to Part 1115 - Voluntary Standards on Which the Commission Has Relied Under Section 9 of the Consumer Product...

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Voluntary Standards on Which the Commission Has Relied Under Section 9 of the Consumer Product Safety Act Appendix to Part 1115 Commercial.... American National Standard for Gas-Fired Room Heaters, Volume II, Unvented Room Heaters, ANSI Z21.11.2-1989...

National Childcare Consumer Study: 1975. Volume II: Current Patterns of Childcare Use in the United States.

ERIC Educational Resources Information Center

Rodes, Thomas W.

This is the second of three study reports on the national incidence of child care usage as well as consumer needs, preferences, attitudes and opinions on child care, based on 4609 personal interviews conducted in 1975 from a national probability sample of households with children under 14 years of age. The study was sponsored by the Office of…

State solar initiatives. Volume 1: A review

NASA Astrophysics Data System (ADS)

Koontz, R.; Neuendorffer, J.; Green, B.; Gordon, N.; Myring, G.; Perwin, E.; Poster, B.; Small, D.; Myring, L.

1981-09-01

The impacts of solar energy programs undertaken in California, Florida, New Mexico, Minnesota, and New York are reviewed. Initiatives were explored: information outreach activities; consumer protection programs including standards, testing, certification, warranties, licensing, and consumer complaint offices; and tax credits and rebates. The experience in these five states is analyzed and conclusions and recommendations that will assist state governments in improving or launching their own programs are presented.

High-fat diets affect energy and bone metabolism in growing rats.

PubMed

Macri, Elisa V; Gonzales Chaves, Macarena M; Rodriguez, Patricia N; Mandalunis, Patricia; Zeni, Susana; Lifshitz, Fima; Friedman, Silvia M

2012-06-01

High-fat diets are usually associated with greater weight (W) gain and body fat (BF). However, it is still unclear whether the type and amount of fat consumed influence BF. Additionally, dietary fat intake may also have consequences on skeletal health. To evaluate in healthy growing rats the effects of high-fat diets and type of dietary fat intake (saturated or vegetable oils) on energy and bone metabolism. At weaning, male Wistar rats (n = 50) were fed either a control diet (C; fat = 7% w/w) or a high-fat diet (20% w/w) containing either: soybean oil, corn oil (CO), linseed oil (LO), or beef tallow (BT) for 8 weeks. Zoometric parameters, BF, food intake and digestibility, and total and bone alkaline phosphatase (b-AP) were assessed. Total skeleton bone mineral density (BMD) and content (BMC), BMC/W, spine BMD, and bone volume (static-histomorphometry) were measured. Animals fed BT diet achieved lower W versus C. Rats fed high-fat vegetable oil diets showed similar effects on the zoometric parameters but differed in BF. BT showed the lowest lipid digestibility and BMC. In contrast, high vegetable oil diets produced no significant differences in BMC, BMC/W, BMD, spine BMD, and bone volume. Marked differences were observed for LO and BT groups in b-AP and CO and BT groups in bone volume. BT diet rich in saturated fatty acids had decreased digestibility and adversely affected energy and bone metabolisms, in growing healthy male rats. There were no changes in zoometric and bone parameters among rats fed high vegetable oil diets.

Higher milk fat content is associated with higher 25-hydroxyvitamin D concentration in early childhood.

PubMed

Vanderhout, Shelley M; Birken, Catherine S; Parkin, Patricia C; Lebovic, Gerald; Chen, Yang; O'Connor, Deborah L; Maguire, Jonathon L

2016-05-01

Current guidelines for cow's milk consumption in children older than age 2 years suggest 1% or 2% milk to reduce the risk of obesity. Given that milk is the main dietary source of vitamin D for North American children and that vitamin D is fat soluble, we hypothesized 25-hydroxyvitamin D (25(OH)D) concentration to be positively associated with the fat content of milk. The objective was to determine the relationship between the fat content of milk consumed and the serum 25(OH)D concentration; our secondary objective was to explore the role that the volume of milk consumed played in this relationship. We completed a cross-sectional study of children aged 12-72 months in the TARGetKids! research network. Multivariable linear regression was used to test the association between milk fat content and child 25(OH)D, adjusted for clinically relevant covariates. The interaction between volume of milk and fat content was examined. Two thousand eight hundred fifty-seven children were included in the analysis. The fat content of milk was positively associated with 25(OH)D (p = 0.03), and the interaction between the volume of milk consumed and the milk fat content was statistically significant (p = 0.005). Children who drank 1% milk needed 2.46 cups (95% confidence interval (CI) 2.38-2.54) of milk to have a 25(OH)D concentration similar to that of children who drank 1 cup of homogenized milk (3.25% fat). Children who consumed 1% milk had 2.05 (95% CI 1.73-2.42) times higher odds of having a 25(OH)D concentration <50 nmol/L compared with children who consumed homogenized milk. In conclusion, recommendations for children to drink lower-fat milk (1% or 2%) may compromise serum 25(OH)D levels and may require study to ensure optimal childhood health.

Effects of Direct-to-Consumer Advertising on Patient Prescription Requests and Physician Prescribing: A Systematic Review of Psychiatry-Relevant Studies

PubMed Central

Becker, Sara J.; Midoun, Miriam M.

2017-01-01

Objective To systematically analyze the effects of direct-to-consumer advertising (DTCA) on patient requests for medication and physician prescribing across psychiatry-relevant studies. Data Sources MEDLINE, PsychINFO, ISI Thompson's Web of Knowledge, and Google Scholar were searched from 1999 through 2014 using variations of the terms direct-to-consumer advertising and psychiatric. Reference lists and an online repository of DTCA manuscripts were also scrutinized. Study Selection English-language studies collecting data at the point of service, focusing on or including psychiatric medication, and assessing DTCA's effects on patient and/or physician behavior were included. Of 989 articles identified, 69 received full-text review. Four studies across five manuscripts met inclusion criteria. Data Extraction Data were extracted on participants, study design, methodological quality, and results. Methodological quality of individual studies was assessed using adapted criteria from the Effective Public Health Practice Project. Confidence in conclusions across studies was determined using principles from the well-established GRADE system. Findings Due to lack of replication across strong randomized controlled trials (RCTs), no conclusions merited high confidence. With moderate confidence, we concluded that DTCA requests: 1) are granted most of the time [1 RCT, 3 observational]; 2) prompt higher prescribing volume [1 RCT, 1 observational]; 3) promote greater adherence to minimally acceptable treatment guidelines for patients with depression [1 RCT], and 4) stimulate overprescribing among patients with an adjustment disorder [1 RCT]. Conclusions Findings suggest that DTCA requests are typically accommodated, promote higher prescribing volume, and have competing effects on treatment quality. More methodologically strong studies are needed to increase confidence in conclusions. PMID:27631149

Effects of Direct-To-Consumer Advertising on Patient Prescription Requests and Physician Prescribing: A Systematic Review of Psychiatry-Relevant Studies.

PubMed

Becker, Sara J; Midoun, Miriam M

2016-10-01

To systematically analyze the effects of direct-to-consumer advertising (DTCA) on patient requests for medication and physician prescribing across psychiatry-relevant studies. MEDLINE, PsycINFO, Thomson Reuters' ISI Web of Knowledge, and Google Scholar were searched (1999-2014) using variations of the terms direct-to-consumer advertising and psychiatric. Reference lists and an online repository of DTCA manuscripts were also scrutinized. English-language studies collecting data at the point of service, focusing on or including psychiatric medication, and assessing the effects of DTCA on patient and/or physician behavior were included. Of 989 articles identified, 69 received full-text review. Four studies across 5 manuscripts met inclusion criteria. Data were extracted on participants, study design, methodological quality, and results. Methodological quality of individual studies was assessed using adapted criteria from the Effective Public Health Practice Project. Confidence in conclusions across studies was determined using principles from the well-established GRADE system. Due to lack of replication across strong randomized controlled trials (RCTs), no conclusions merited high confidence. With moderate confidence, we concluded that DTCA requests (1) are granted most of the time (1 RCT, 3 observational), (2) prompt higher prescribing volume (1 RCT, 1 observational), (3) promote greater adherence to minimally acceptable treatment guidelines for patients with depression (1 RCT), and (4) stimulate overprescribing among patients with an adjustment disorder (1 RCT). Findings suggest that DTCA requests are typically accommodated, promote higher prescribing volume, and have competing effects on treatment quality. More methodologically strong studies are needed to increase confidence in conclusions. © Copyright 2016 Physicians Postgraduate Press, Inc.

Value added products with popular low grade rice varieties of Andhra Pradesh.

PubMed

Anitha, G; Rajyalakshmi, P

2014-12-01

Eight Popular Low Grade Rice Varieties (PLRVs) MTU 3626, MTU 1001, MTU 1010, MTU 4870 and NLR 145, NLR 34242, NLR 30491, NLR 34449, (developed and released by ANGR agricultural University, Andhra Pradesh) having poor cooking quality were selected for the study. ANGRAU variety BPT 5204 popularly consumed as staple rice was used as check. Eight products of traditional/commercial importance were standardized incorporating PLRVs as a major ingredient in the form of rice flour (burfi, noodles and extruded snack product and vennaundalu (butter coated balls), palathalikalu (dough rolled into strips, steamed/cooked in milk); rice semolina (instant kheer mix and instant upma mix), and flaked rice (nutritious bar). The products were evaluated for nutritional, cooking quality characteristics, consumer acceptability and shelf-life. Consumer acceptability of the PLR products was carried out with 60 farm women based on 9 point hedonic scale. Shelf-life of the products (packed in both metalized PP and PE pouches) was evaluated monthly for chemical, microbiological and sensory parameters. Energy values of control and PLR products showed no significant difference. Upon cooking, PLR Noodles showed no significant difference with water absorption and volume but more (p < 0.05) solid loss and cooked weight. Utilization of PLR flakes in nutritious bar resulted in highly crispy and crunchy texture, enhanced flavor and taste as compared to control. The percent total solids and suspended solids were more (though not significant) in PLR kheer and palathalikalu. Extruded product (control and PLR) showed no significant difference with length, diameter, weight and volume expansion ratio and water absorption index (WAI). Consumer acceptability was high for PLR products palathalikalu (95%), instant kheer mix (92%) and extruded product (88%). As per sensory scores, all the PLR products were well accepted with no observable changes in flavor or taste upon storage. PLR products showed increased (P < 0.05) trend for moisture and FFA content from initial to 90 days of storage. The lowest TPC was observed for noodles and highest for burfi (though in safe limits). Extruded snacks (control and PLR) showed no microbial growth during the entire storage period. Considering the poor marketability of PLRVs for consumption as staple rice, the study signifies the utilitarian value of PLRVs in making products of convenience/commercial importance.

Does quality of drinking water matter in kidney stone disease: A study in West Bengal, India.

PubMed

Mitra, Pubali; Pal, Dilip Kumar; Das, Madhusudan

2018-05-01

The combined interaction of epidemiology, environmental exposure, dietary habits, and genetic factors causes kidney stone disease (KSD), a common public health problem worldwide. Because a high water intake (>3 L daily) is widely recommended by physicians to prevent KSD, the present study evaluated whether the quantity of water that people consume daily is associated with KSD and whether the quality of drinking water has any effect on disease prevalence. Information regarding residential address, daily volume of water consumption, and source of drinking water was collected from 1,266 patients with kidney stones in West Bengal, India. Drinking water was collected by use of proper methods from case (high stone prevalence) and control (zero stone prevalence) areas thrice yearly. Water samples were analyzed for pH, alkalinity, hardness, total dissolved solutes, electrical conductivity, and salinity. Average values of the studied parameters were compared to determine if there were any statistically significant differences between the case and control areas. We observed that as many as 53.6% of the patients consumed <3 L of water daily. Analysis of drinking water samples from case and control areas, however, did not show any statistically significant alterations in the studied parameters. All water samples were found to be suitable for consumption. It is not the quality of water, rather the quantity of water consumed that matters most in the occurrence of KSD.

Recycling potential for low voltage and high voltage high rupturing capacity fuse links.

PubMed

Psomopoulos, Constantinos S; Barkas, Dimitrios A; Kaminaris, Stavros D; Ioannidis, George C; Karagiannopoulos, Panagiotis

2017-12-01

Low voltage and high voltage high-rupturing-capacity fuse links are used in LV and HV installations respectively, protecting mainly the LV and HV electricity distribution and transportation networks. The Waste Electrical and Electronic Equipment Directive (2002/96/EC) for "Waste of electrical and electronic equipment" is the main related legislation and as it concerns electrical and electronic equipment, it includes electric fuses. Although, the fuse links consist of recyclable materials, only small scale actions have been implemented for their recycling around Europe. This work presents the possibilities for material recovery from this specialized industrial waste for which there are only limited volume data. Furthermore, in order to present the huge possibilities and environmental benefits, it presents the potential for recycling of HRC fuses used by the Public Power Corporation of Greece, which is the major consumer for the country, but one of the smallest ones in Europe and globally, emphasizing in this way in the issue. According to the obtained results, fuse recycling could contribute to the effort for minimize the impacts on the environment through materials recovery and reduction of the wastes' volume disposed of in landfills. Copyright © 2017 Elsevier Ltd. All rights reserved.

Highly Efficient Large-Scale Lentiviral Vector Concentration by Tandem Tangential Flow Filtration

PubMed Central

Cooper, Aaron R.; Patel, Sanjeet; Senadheera, Shantha; Plath, Kathrin; Kohn, Donald B.; Hollis, Roger P.

2014-01-01

Large-scale lentiviral vector (LV) concentration can be inefficient and time consuming, often involving multiple rounds of filtration and centrifugation. This report describes a simpler method using two tangential flow filtration (TFF) steps to concentrate liter-scale volumes of LV supernatant, achieving in excess of 2000-fold concentration in less than 3 hours with very high recovery (>97%). Large volumes of LV supernatant can be produced easily through the use of multi-layer flasks, each having 1720 cm2 surface area and producing ~560 mL of supernatant per flask. Combining the use of such flasks and TFF greatly simplifies large-scale production of LV. As a demonstration, the method is used to produce a very high titer LV (>1010 TU/mL) and transduce primary human CD34+ hematopoietic stem/progenitor cells at high final vector concentrations with no overt toxicity. A complex LV (STEMCCA) for induced pluripotent stem cell generation is also concentrated from low initial titer and used to transduce and reprogram primary human fibroblasts with no overt toxicity. Additionally, a generalized and simple multiplexed real- time PCR assay is described for lentiviral vector titer and copy number determination. PMID:21784103

Reach for Reference. Nostalgia for Teachers, History for Students: Bowling, Beatniks, and Bell-Bottoms

ERIC Educational Resources Information Center

Safford, Barbara Ripp

2005-01-01

This article describes the U-X-L encyclopedia "Bowling, Beatniks, and Bell-Bottoms: Pop Culture of 20th Century America," a five-volume set, arranged chronologically with two decades in each volume. Each decade then is divided into topics, such as commerce (more exciting than it sounds with lots of inventions, consumer goods, and technology); film…

Effect of Direct-to-Consumer Advertising on Statin Use in the United States.

PubMed

Chang, Hsien-Yen; Murimi, Irene; Daubresse, Matthew; Qato, Dima M; Emery, Sherry L; Alexander, G Caleb

2017-08-01

The value of direct-to-consumer advertising (DTCA) of prescription drugs is widely debated, as is the effect of DTCA on prescription sales and health care utilization. We examined the association between DTCA intensity for statin medications and prescription sales and cholesterol-related health care utilization. We conducted an ecological study for 75 designated market areas from 2005 to 2009 in the United States using linked data regarding televised DTCA volume, non-DTCA marketing and promotion, retail, mail order and long-term care prescription drug sales, prescription drug and ambulatory care health care utilization, and contextual factors such as health care density and socioeconomic status. Main outcomes and measures were volume of sales, number of dispensed prescriptions, and high cholesterol-related outpatient visits. Analyses were conducted in 2016. The intensity of rosuvastatin and atorvastatin ad exposures per household varied substantially across designated market areas. After adjustment for socioeconomic, demographic, and clinical characteristics, each 100-unit increase in advertisement viewership was associated with a 2.22% [95% confidence interval (CI), 0.30%-4.19%] increase in statin sales. Similar patterns were observed between DTCA and statin dispensing among the commercially insured. DTCA was associated with increases in high cholesterol-related outpatient visits among adults 18-45 years of age (3.15% increase in visits per 100-unit increase in viewership, 95% CI, 0.98%-5.37%) but not among those 46-65 years of age (0.51%, 95% CI, -1.49% to 2.55%). DTCA for statins is associated with increases in statin utilization and hyperlipidemia-related outpatient visits, especially for young adults.

Alcohol: impact on sports performance and recovery in male athletes.

PubMed

Barnes, Matthew J

2014-07-01

Alcohol is the most commonly used recreational drug globally and its consumption, often in large volume, is deeply embedded in many aspects of Western society. Indeed, athletes are not exempt from the influence alcohol has on society; they often consume greater volumes of alcohol through bingeing behaviour compared with the general population, yet it is often expected and recommended that athletes abstain from alcohol to avoid the negative impact this drug may have on recovery and sporting performance. While this recommendation may seem sensible, the impact alcohol has on recovery and sports performance is complicated and depends on many factors, including the timing of alcohol consumption post-exercise, recovery time required before recommencing training/competition, injury status and dose of alcohol being consumed. In general, acute alcohol consumption, at the levels often consumed by athletes, may negatively alter normal immunoendocrine function, blood flow and protein synthesis so that recovery from skeletal muscle injury may be impaired. Other factors related to recovery, such as rehydration and glycogen resynthesis, may be affected to a lesser extent. Those responsible for the wellbeing of athletes, including the athlete themselves, should carefully monitor habitual alcohol consumption so that the generic negative health and social outcomes associated with heavy alcohol use are avoided. Additionally, if athletes are to consume alcohol after sport/exercise, a dose of approximately 0.5 g/kg body weight is unlikely to impact most aspects of recovery and may therefore be recommended if alcohol is to be consumed during this period.

Capture, Movement, Trade, and Consumption of Mammals in Madagascar

PubMed Central

Reuter, Kim E.; Randell, Haley; Wills, Abigail R.; Janvier, Totozafy Eric; Belalahy, Tertius Rodriguez; Sewall, Brent J.

2016-01-01

Wild meat trade constitutes a threat to many animal species. Understanding the commodity chain of wild animals (hunting, transportation, trade, consumption) can help target conservation initiatives. Wild meat commodity chain research has focused on the formal trade and less on informal enterprises, although informal enterprises contribute to a large portion of the wild meat trade in sub-Saharan Africa. We aimed to provide a more comprehensive understanding of the formal and informal components of these commodity chains by focusing on the mammalian wild meat trade in Madagascar. Our objectives were to: (1) identify hunting strategies used to capture different wild mammals; (2) analyze patterns of movement of wild meat from the capture location to the final consumer; (3) examine wild meat prices, volumes, and venues of sale; and (4) estimate the volume of wild meat consumption. Data were collected in May-August 2013 using semi-structured interviews with consumers (n = 1343 households, 21 towns), meat-sellers (n = 520 restaurants, open-air markets stalls, and supermarkets, 9 towns), and drivers of inter-city transit vehicles (n = 61, 5 towns). We found that: (1) a wide range of hunting methods were used, though prevalence of use differed by animal group; (2) wild meat was transported distances of up to 166 km to consumers, though some animal groups were hunted locally (<10 km) in rural areas; (3) most wild meat was procured from free sources (hunting, gifts), though urban respondents who consumed bats and wild pigs were more likely to purchase those meats; and (4) wild meat was consumed at lower rates than domestic meat, though urban respondents consumed wild meat twice as much per year compared to rural respondents. Apart from the hunting stage, the consumption and trade of wild meat in Madagascar is also likely more formalized than previously thought. PMID:26926987

Puffing of okara/rice blends using a rice cake machine.

PubMed

Xie, M; Huff, H; Hsieh, F; Mustapha, A

2008-10-01

Okara is the insoluble byproduct of soymilk and tofu manufactures. It is cheap, high in nutrients, and possesses great potential to be applied to functional human foods. In this study, a puffed okara/rice cake product was developed with blends of okara pellets and parboiled rice. Consumer preference and acceptance tests were conducted for the product. Okara pellets were prepared by grinding the strands obtained from extruding a mixture of dried okara and rice flour (3:2, w/w) with a twin-screw extruder. Okara pellets and parboiled rice were blended in 4 ratios, 90:10, 70:30, 40:60, and 0:100 (w/w), and tempered to 14% and 17% moisture. The blends were puffed at 221, 232, and 243 degrees C for 4, 5, or 6 s. The okara/rice cakes were evaluated for specific volume (SPV), texture, color, and percent weight loss after tumbling. Overall, the decrease in okara content and increase in moisture, heating temperature and time led to greater specific volume (SPV) and hardness, lighter color, and lower percent weight loss after tumbling. The consumer tests indicated that the okara/rice cake containing 70% okara pellets was preferred and the 90% one was liked the least. The possible drivers of liking for the puffed okara/rice cakes could be the okara content, hardness, SPV, bright color, and percent weight loss after tumbling.

Automatic liquid handling for life science: a critical review of the current state of the art.

PubMed

Kong, Fanwei; Yuan, Liang; Zheng, Yuan F; Chen, Weidong

2012-06-01

Liquid handling plays a pivotal role in life science laboratories. In experiments such as gene sequencing, protein crystallization, antibody testing, and drug screening, liquid biosamples frequently must be transferred between containers of varying sizes and/or dispensed onto substrates of varying types. The sample volumes are usually small, at the micro- or nanoliter level, and the number of transferred samples can be huge when investigating large-scope combinatorial conditions. Under these conditions, liquid handling by hand is tedious, time-consuming, and impractical. Consequently, there is a strong demand for automated liquid-handling methods such as sensor-integrated robotic systems. In this article, we survey the current state of the art in automatic liquid handling, including technologies developed by both industry and research institutions. We focus on methods for dealing with small volumes at high throughput and point out challenges for future advancements.

Fully automatized renal parenchyma volumetry using a support vector machine based recognition system for subject-specific probability map generation in native MR volume data

NASA Astrophysics Data System (ADS)

Gloger, Oliver; Tönnies, Klaus; Mensel, Birger; Völzke, Henry

2015-11-01

In epidemiological studies as well as in clinical practice the amount of produced medical image data strongly increased in the last decade. In this context organ segmentation in MR volume data gained increasing attention for medical applications. Especially in large-scale population-based studies organ volumetry is highly relevant requiring exact organ segmentation. Since manual segmentation is time-consuming and prone to reader variability, large-scale studies need automatized methods to perform organ segmentation. Fully automatic organ segmentation in native MR image data has proven to be a very challenging task. Imaging artifacts as well as inter- and intrasubject MR-intensity differences complicate the application of supervised learning strategies. Thus, we propose a modularized framework of a two-stepped probabilistic approach that generates subject-specific probability maps for renal parenchyma tissue, which are refined subsequently by using several, extended segmentation strategies. We present a three class-based support vector machine recognition system that incorporates Fourier descriptors as shape features to recognize and segment characteristic parenchyma parts. Probabilistic methods use the segmented characteristic parenchyma parts to generate high quality subject-specific parenchyma probability maps. Several refinement strategies including a final shape-based 3D level set segmentation technique are used in subsequent processing modules to segment renal parenchyma. Furthermore, our framework recognizes and excludes renal cysts from parenchymal volume, which is important to analyze renal functions. Volume errors and Dice coefficients show that our presented framework outperforms existing approaches.

Fully automatized renal parenchyma volumetry using a support vector machine based recognition system for subject-specific probability map generation in native MR volume data.

PubMed

Gloger, Oliver; Tönnies, Klaus; Mensel, Birger; Völzke, Henry

2015-11-21

In epidemiological studies as well as in clinical practice the amount of produced medical image data strongly increased in the last decade. In this context organ segmentation in MR volume data gained increasing attention for medical applications. Especially in large-scale population-based studies organ volumetry is highly relevant requiring exact organ segmentation. Since manual segmentation is time-consuming and prone to reader variability, large-scale studies need automatized methods to perform organ segmentation. Fully automatic organ segmentation in native MR image data has proven to be a very challenging task. Imaging artifacts as well as inter- and intrasubject MR-intensity differences complicate the application of supervised learning strategies. Thus, we propose a modularized framework of a two-stepped probabilistic approach that generates subject-specific probability maps for renal parenchyma tissue, which are refined subsequently by using several, extended segmentation strategies. We present a three class-based support vector machine recognition system that incorporates Fourier descriptors as shape features to recognize and segment characteristic parenchyma parts. Probabilistic methods use the segmented characteristic parenchyma parts to generate high quality subject-specific parenchyma probability maps. Several refinement strategies including a final shape-based 3D level set segmentation technique are used in subsequent processing modules to segment renal parenchyma. Furthermore, our framework recognizes and excludes renal cysts from parenchymal volume, which is important to analyze renal functions. Volume errors and Dice coefficients show that our presented framework outperforms existing approaches.

Using Direct Metal Deposition to Fabricate Mold Plates for an Injection Mold Machine Allowing for the Evaluation of Cost Effective Near-Sourcing Opportunities in Larger, High Volume Consumer Products

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duty, Chad E; Groh, Bill

2014-10-31

ORNL collaborated with Radio Systems Corporation to investigate additive manufacturing (AM) of mold plates for plastic injection molding by direct metal deposition. The team s modelling effort identified a 100% improvement in heat transfer through use of conformal cooling lines that could be built into the mold using a revolutionary design enabled by additive manufacturing. Using the newly installed laser deposition system at the ORNL Manufacturing Demonstration Facility (MDF) a stainless steel mold core was printed.

Simple Estimation of the Endolymphatic Volume Ratio after Intravenous Administration of a Single-dose of Gadolinium Contrast.

PubMed

Naganawa, Shinji; Kanou, Mai; Ohashi, Toshio; Kuno, Kayao; Sone, Michihiko

2016-10-11

To evaluate the feasibility of a simple estimation for the endolymphatic volume ratio (endolymph volume/total lymph volume = %EL volume ) from an area ratio obtained from only one slice (%EL 1slice ) or from three slices (%EL 3slices ). The %EL volume, calculated from a time-consuming measurement on all magnetic resonance (MR) slices, was compared to the %EL 1slice and the %EL 3slices . In 40 ears of 20 patients with a clinical suspicion of endolymphatic hydrops, MR imaging was performed 4 hours after intravenous administration of a single dose of gadolinium-based contrast material (IV-SD-GBCM). Using previously reported HYDROPS2-Mi2 MR imaging, the %EL volume values in the cochlea and the vestibule were measured separately by two observers. The correlations between the %EL 1slice or the %EL 3slices and the %EL volume values were evaluated. A strong linear correlation was observed between the %EL volume and the %EL 3slices or the %EL 1slice in the cochlea. The Pearson correlation coefficient (r) was 0.968 (3 slices) and 0.965 (1 slice) for observer A, and 0.968 (3 slices) and 0.964 (1 slice) for observer B (P < 0.001, for all). A strong linear correlation was also observed between the %EL volume and the %EL 3slices or the %EL 1slice in the vestibule. The Pearson correlation coefficient (r) was 0.980 (3 slices) and 0.953 (1 slice) for observer A, and 0.979 (3 slices) and 0.952 (1 slice) for observer B (P < 0.001, for all). The high intra-class correlation coefficients (0.991-0.997) between the endolymph volume ratios by two observers were observed in both the cochlea and the vestibule for values of the %EL volume , the %EL 3slices and the %EL 1slice . The %EL volume might be easily estimated from the %EL 3slices or the %EL 1slice .

Consumer’s market analysis of products based on cassava

NASA Astrophysics Data System (ADS)

Unteawati, Bina; Fitriani; Fatih, Cholid

2018-03-01

Cassava product has the important role for enhancing household's income in rural. Cassava as raw material food is plentiful as local food in Lampung. Cassava product is one of strategic value addition activities. Value additional activities are a key to create income source enrichment in rural. The household was product cassava as a snack or additional food. Their product cassava was operated in small-scale, traditional, and discontinuous production. They have been lacked in technology, capital, and market access. Measurement the sustainability of their business is important. The market has driven the business globally. This research aims to (1) describe the cassava demand to locally product cassava in rural and (2) analysis the consumer's perception of cassava product. Research take placed in Lampung Province, involved Bandar Lampung and Metro City, Pringsewu, Pesawaran, Central Lampung, and East Lampung district. It is held in February until April 2017. Data were analyzed by descriptive statistic and multidimensional scaling. Based on the analysis conclude that (1) the demand of product cassava from rural was massive in volume and regularity with the enormous transaction. This fact is very important to role business cycles. Consumers demand continuously will lead the production of cassava product sustain. Producers of product cassava will consume fresh cassava for the farmer. Consumption of fresh cassava for home industry regularly in rural will develop balancing in fresh cassava price in the farming gate (2) The consumer's perception on cassava product in the different market showed that they prefer much to consume cassava chips as cassava product products than other. Next are crackers, opak, and tiwul rice. Urban consumers prefer product products as snacks (chips, crumbs, and opak), with consumption frequency of 2-5 times per week and volume of 1-3 kg purchases. Consumers in rural were more frequent with daily consumption frequency. Multidimensional scaling analysis performed that price of cassava product was the centre of product attribute.

Eat fit. Get big? How fitness cues influence food consumption volumes.

PubMed

Koenigstorfer, Joerg; Groeppel-Klein, Andrea; Kettenbaum, Myriam; Klicker, Kristina

2013-06-01

Fitness cues on food packages are a common marketing practice in the food sector. This study aims to find out whether and how fitness cues influence food consumption. The results of two field studies show that, even though eating fitness-cued food does not help consumers become more fit, the claims on the packaging increase both serving size and actual food consumption. This effect is mediated by serving size inferences. Also, consumers feel less guilty and perceive themselves closer to desired fitness levels after having consumed the food. The findings show that packaging cues relating to energy expenditure can increase energy intake despite the fact that consumers are not engaged in any actual physical activity while eating the food. Copyright © 2013 Elsevier Ltd. All rights reserved.

Supervised machine learning-based classification scheme to segment the brainstem on MRI in multicenter brain tumor treatment context.

PubMed

Dolz, Jose; Laprie, Anne; Ken, Soléakhéna; Leroy, Henri-Arthur; Reyns, Nicolas; Massoptier, Laurent; Vermandel, Maximilien

2016-01-01

To constrain the risk of severe toxicity in radiotherapy and radiosurgery, precise volume delineation of organs at risk is required. This task is still manually performed, which is time-consuming and prone to observer variability. To address these issues, and as alternative to atlas-based segmentation methods, machine learning techniques, such as support vector machines (SVM), have been recently presented to segment subcortical structures on magnetic resonance images (MRI). SVM is proposed to segment the brainstem on MRI in multicenter brain cancer context. A dataset composed by 14 adult brain MRI scans is used to evaluate its performance. In addition to spatial and probabilistic information, five different image intensity values (IIVs) configurations are evaluated as features to train the SVM classifier. Segmentation accuracy is evaluated by computing the Dice similarity coefficient (DSC), absolute volumes difference (AVD) and percentage volume difference between automatic and manual contours. Mean DSC for all proposed IIVs configurations ranged from 0.89 to 0.90. Mean AVD values were below 1.5 cm(3), where the value for best performing IIVs configuration was 0.85 cm(3), representing an absolute mean difference of 3.99% with respect to the manual segmented volumes. Results suggest consistent volume estimation and high spatial similarity with respect to expert delineations. The proposed approach outperformed presented methods to segment the brainstem, not only in volume similarity metrics, but also in segmentation time. Preliminary results showed that the approach might be promising for adoption in clinical use.

Microextraction by packed sorbent: an emerging, selective and high-throughput extraction technique in bioanalysis.

PubMed

Pereira, Jorge; Câmara, José S; Colmsjö, Anders; Abdel-Rehim, Mohamed

2014-06-01

Sample preparation is an important analytical step regarding the isolation and concentration of desired components from complex matrices and greatly influences their reliable and accurate analysis and data quality. It is the most labor-intensive and error-prone process in analytical methodology and, therefore, may influence the analytical performance of the target analytes quantification. Many conventional sample preparation methods are relatively complicated, involving time-consuming procedures and requiring large volumes of organic solvents. Recent trends in sample preparation include miniaturization, automation, high-throughput performance, on-line coupling with analytical instruments and low-cost operation through extremely low volume or no solvent consumption. Micro-extraction techniques, such as micro-extraction by packed sorbent (MEPS), have these advantages over the traditional techniques. This paper gives an overview of MEPS technique, including the role of sample preparation in bioanalysis, the MEPS description namely MEPS formats (on- and off-line), sorbents, experimental and protocols, factors that affect the MEPS performance, and the major advantages and limitations of MEPS compared with other sample preparation techniques. We also summarize MEPS recent applications in bioanalysis. Copyright © 2014 John Wiley & Sons, Ltd.

Determination of polycyclic aromatic hydrocarbons in drinking water samples by solid-phase nanoextraction and high-performance liquid chromatography.

PubMed

Wang, Huiyong; Campiglia, Andres D

2008-11-01

A novel alternative is presented for the extraction and preconcentration of polycyclic aromatic hydrocarbons (PAH) from water samples. The new approachwhich we have named solid-phase nanoextraction (SPNE)takes advantage of the strong affinity that exists between PAH and gold nanoparticles. Carefully optimization of experimental parameters has led to a high-performance liquid chromatography method with excellent analytical figures of merit. Its most striking feature correlates to the small volume of water sample (500 microL) for complete PAH analyses. The limits of detection ranged from 0.9 (anthracene) to 58 ng.L (-1) (fluorene). The relative standard deviations at medium calibration concentrations vary from 3.2 (acenaphthene) to 9.1% (naphthalene). The analytical recoveries from tap water samples of the six regulated PAH varied from 83.3 +/- 2.4 (benzo[ k]fluoranthene) to 95.7 +/- 4.1% (benzo[ g,h,i]perylene). The entire extraction procedure consumes less than 100 microL of organic solvents per sample, which makes it environmentally friendly. The small volume of extracting solution makes SPNE a relatively inexpensive extraction approach.

Programmer/Analyst Guide for the Army Unit Resiliency Analysis (AURA) computer Simulation Model. Volume 1. AURA Methodology

DTIC Science & Technology

1990-10-01

involving a heavy artillery barrage, the impact point output alone could consume upwards of 10,000 pages of computer paper. For this reason, AURA provides...but pervasive factor: the asset allocation model must be compatible with the mathematical behavior of the input data. Thus, for example, if assets are...described as expendable during repair or decontamination activities, it must have HOMELINKS which appear in the consuming repair SUBCHAINs

Transportation Energy Conservation Data Book: A Selected Bibliography. Edition 3,

DTIC Science & Technology

1978-11-01

Charlottesville, VA 22901 TITLE: Couputer-Based Resource Accounting Model TT1.1: Methodology for the Design of Urban for Automobile Technology Impact...Evaluation System ACCOUNTING; INDUSTRIAL SECTOR; ENERGY tPIESi Documentation. volume 6. CONSUM PTION: PERFORANCE: DESIGN : NASTE MEAT: Methodology for... Methodology for the Design of Urban Transportation 000172 Energy Flows In the U.S., 1973 and 1974. Volume 1: Methodology * $opdate to the Fational Energy

Does quality of drinking water matter in kidney stone disease: A study in West Bengal, India

PubMed Central

Mitra, Pubali; Pal, Dilip Kumar

2018-01-01

Purpose The combined interaction of epidemiology, environmental exposure, dietary habits, and genetic factors causes kidney stone disease (KSD), a common public health problem worldwide. Because a high water intake (>3 L daily) is widely recommended by physicians to prevent KSD, the present study evaluated whether the quantity of water that people consume daily is associated with KSD and whether the quality of drinking water has any effect on disease prevalence. Materials and Methods Information regarding residential address, daily volume of water consumption, and source of drinking water was collected from 1,266 patients with kidney stones in West Bengal, India. Drinking water was collected by use of proper methods from case (high stone prevalence) and control (zero stone prevalence) areas thrice yearly. Water samples were analyzed for pH, alkalinity, hardness, total dissolved solutes, electrical conductivity, and salinity. Average values of the studied parameters were compared to determine if there were any statistically significant differences between the case and control areas. Results We observed that as many as 53.6% of the patients consumed <3 L of water daily. Analysis of drinking water samples from case and control areas, however, did not show any statistically significant alterations in the studied parameters. All water samples were found to be suitable for consumption. Conclusions It is not the quality of water, rather the quantity of water consumed that matters most in the occurrence of KSD. PMID:29744472

Fluid intake patterns: an epidemiological study among children and adolescents in Brazil

PubMed Central

2012-01-01

Background Energy from liquids is one of the most important factors that could impact on the high prevalence of children and adolescents obesity around the world. There are few data on the liquid consumption in Brazil. The aim of this study is to evaluate the volume and quality of liquids consumed by Brazilian children and adolescents and to determine the proportion of their daily energy intake composed of liquids. Methods A multicenter study was conducted in five Brazilian cities; the study included 831 participants between 3 and 17 years of age. A four-day dietary record specific to fluids was completed for each individual, and the volume of and Kcal from liquid intake were evaluated. The average number of Kcal in each beverage was determined based on label information, and the daily energy intake data from liquids were compared with the recommendations of the National Health Surveillance Agency (Agência Nacional de Vigilância Sanitária– ANVISA), the Brazilian food regulation authority, according to each subject’s age. Results As the children aged, the volume of carbonated beverages that they consumed increased significantly, and their milk intake decreased significantly. For children between the ages of 3 and 10, milk and dairy products contributed the greatest daily number of Kcal from liquids. Sugar sweetened beverages which included carbonated beverages, nectars and artificial beverages, accounted for 37% and 45% of the total Kcal from liquid intake in the 3- to 6-year-old and 7- to 10- year-old groups, respectively. Among adolescents (participants 11- to 17- years old), most of the energy intake from liquids came from carbonated beverages, which accounted for an average of 207 kcal/day in this group (42% of their total energy intake from liquids). Health professionals should be attentive to the excessive consumption of sugar sweetened beverages in children and adolescents. The movement toward healthier dietary patterns at the individual and population levels may help to improve programs for preventing overweight and obesity in children and adolescents. Conclusion From childhood to adolescence the daily volume of liquid ingested increased reaching a total of 2.0 liters on average. Of this volume, the daily volume of milk ingested decreased while the carbonated drinks, sweetened, nectars and artificial beverages increased significantly. The proportion of water remained constant in about 1/3 of the total volume. From 3 to 17 years of age the energy intake from carbonated beverages increased by about 20%. The carbonated drinks on average corresponded to a tenth of the daily requirements of energy of adolescents. PMID:23167254

Toxicological properties and risk assessment of the anionic surfactants category: Alkyl sulfates, primary alkane sulfonates, and α-olefin sulfonates.

PubMed

Wibbertmann, Axel; Mangelsdorf, Inge; Gamon, Konrad; Sedlak, Richard

2011-07-01

The category of the anionic surfactants (ANS) consisting of 46 alkyl sulfates, 6 primary alkane sulfonates, and 9 α-olefin sulfonates has been assessed under the high production volume (HPV) chemicals program of the Organisation for Economic Cooperation and Development (OECD) in 2007. In this review the toxicological properties of these chemicals are summarized. The chemicals of this category are used predominantly in detergents, household cleaning products, and cosmetics. These chemicals show low acute and repeat dose toxicity. There was no evidence of genetic or reproductive toxicity, or carcinogenicity. There also was no indication for sensitizing properties. Skin and eye irritating effects in consumers are not to be expected. For consumers, the calculated body burden is about 10,000 times lower than the lowest NOAEL value in experimental animals, so that adverse effects caused by substances of the ANS category can be excluded. Copyright © 2011 Elsevier Inc. All rights reserved.

Event Management of RFID Data Streams: Fast Moving Consumer Goods Supply Chains

NASA Astrophysics Data System (ADS)

Mo, John P. T.; Li, Xue

Radio Frequency Identification (RFID) is a wireless communication technology that uses radio-frequency waves to transfer information between tagged objects and readers without line of sight. This creates tremendous opportunities for linking real world objects into a world of "Internet of things". Application of RFID to Fast Moving Consumer Goods sector will introduce billions of RFID tags in the world. Almost everything is tagged for tracking and identification purposes. This phenomenon will impose a new challenge not only to the network capacity but also to the scalability of processing of RFID events and data. This chapter uses two national demonstrator projects in Australia as case studies to introduce an event managementframework to process high volume RFID data streams in real time and automatically transform physical RFID observations into business-level events. The model handles various temporal event patterns, both simple and complex, with temporal constraints. The model can be implemented in a data management architecture that allows global RFID item tracking and enables fast, large-scale RFID deployment.

Prediction of Protein Aggregation in High Concentration Protein Solutions Utilizing Protein-Protein Interactions Determined by Low Volume Static Light Scattering.

PubMed

Hofmann, Melanie; Winzer, Matthias; Weber, Christian; Gieseler, Henning

2016-06-01

The development of highly concentrated protein formulations is more demanding than for conventional concentrations due to an elevated protein aggregation tendency. Predictive protein-protein interaction parameters, such as the second virial coefficient B22 or the interaction parameter kD, have already been used to predict aggregation tendency and optimize protein formulations. However, these parameters can only be determined in diluted solutions, up to 20 mg/mL. And their validity at high concentrations is currently controversially discussed. This work presents a μ-scale screening approach which has been adapted to early industrial project needs. The procedure is based on static light scattering to directly determine protein-protein interactions at concentrations up to 100 mg/mL. Three different therapeutic molecules were formulated, varying in pH, salt content, and addition of excipients (e.g., sugars, amino acids, polysorbates, or other macromolecules). Validity of the predicted aggregation tendency was confirmed by stability data of selected formulations. Based on the results obtained, the new prediction method is a promising screening tool for fast and easy formulation development of highly concentrated protein solutions, consuming only microliter of sample volumes. Copyright © 2016 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Characteristics of an immobilized yeast cell system using very high gravity for the fermentation of ethanol.

PubMed

Ji, Hairui; Yu, Jianliang; Zhang, Xu; Tan, Tianwei

2012-09-01

The characteristics of ethanol production by immobilized yeast cells were investigated for both repeated batch fermentation and continuous fermentation. With an initial sugar concentration of 280 g/L during the repeated batch fermentation, more than 98% of total sugar was consumed in 65 h with an average ethanol concentration and ethanol yield of 130.12 g/L and 0.477 g ethanol/g consumed sugar, respectively. The immobilized yeast cell system was reliable for at least 10 batches and for a period of 28 days without accompanying the regeneration of Saccharomyces cerevisiae inside the carriers. The multistage continuous fermentation was carried out in a five-stage column bioreactor with a total working volume of 3.75 L. The bioreactor was operated for 26 days at a dilution rate of 0.015 h(-1). The ethanol concentration of the effluent reached 130.77 g/L ethanol while an average 8.18 g/L residual sugar remained. Due to the high osmotic pressure and toxic ethanol, considerable yeast cells died without regeneration, especially in the last two stages, which led to the breakdown of the whole system of multistage continuous fermentation.

High Efficiency, High Performance Clothes Dryer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peter Pescatore; Phil Carbone

This program covered the development of two separate products; an electric heat pump clothes dryer and a modulating gas dryer. These development efforts were independent of one another and are presented in this report in two separate volumes. Volume 1 details the Heat Pump Dryer Development while Volume 2 details the Modulating Gas Dryer Development. In both product development efforts, the intent was to develop high efficiency, high performance designs that would be attractive to US consumers. Working with Whirlpool Corporation as our commercial partner, TIAX applied this approach of satisfying consumer needs throughout the Product Development Process for bothmore » dryer designs. Heat pump clothes dryers have been in existence for years, especially in Europe, but have not been able to penetrate the market. This has been especially true in the US market where no volume production heat pump dryers are available. The issue has typically been around two key areas: cost and performance. Cost is a given in that a heat pump clothes dryer has numerous additional components associated with it. While heat pump dryers have been able to achieve significant energy savings compared to standard electric resistance dryers (over 50% in some cases), designs to date have been hampered by excessively long dry times, a major market driver in the US. The development work done on the heat pump dryer over the course of this program led to a demonstration dryer that delivered the following performance characteristics: (1) 40-50% energy savings on large loads with 35 F lower fabric temperatures and similar dry times; (2) 10-30 F reduction in fabric temperature for delicate loads with up to 50% energy savings and 30-40% time savings; (3) Improved fabric temperature uniformity; and (4) Robust performance across a range of vent restrictions. For the gas dryer development, the concept developed was one of modulating the gas flow to the dryer throughout the dry cycle. Through heat modulation in a gas dryer, significant time and energy savings, combined with dramatically reduced fabric temperatures, was achieved in a cost-effective manner. The key design factor lay in developing a system that matches the heat input to the dryer with the fabrics ability to absorb it. The development work done on the modulating gas dryer over the course of this program led to a demonstration dryer that delivered the following performance characteristics: (1) Up to 25% reduction in energy consumption for small and medium loads; (2) Up to 35% time savings for large loads with 10-15% energy reduction and no adverse effect on cloth temperatures; (3) Reduced fabric temperatures, dry times and 18% energy reduction for delicate loads; and, (4) Robust performance across a range of vent restrictions.« less

78 FR 18902 - Defining Larger Participants of the Student Loan Servicing Market

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

...), available at http://www.newyorkfed.org/research/national_economy/householdcredit/DistrictReport_Q42012.pdf... comparative amount of consumer impact of various servicers. The Bureau anticipates that account volume would...

Influence of Bisphenol A on Thyroid Volume and Structure Independent of Iodine in School Children

PubMed Central

Wang, Na; Zhou, Ying; Fu, Chaowei; Wang, Hexing; Huang, Peixin; Wang, Bin; Su, Meifang; Jiang, Feng; Fang, Hong; Zhao, Qi; Chen, Yue; Jiang, Qingwu

2015-01-01

Background Although several studies have evaluated the relationship between bisphenol A (BPA) and thyroid functions, their results are not entirely consistent. Little is known about BPA in relation to thyroid volume and structure. Methods We examined the association of BPA with thyroid volume and thyroid nodules using data from 718 Chinese children living in the East Coast of China in 2012. First morning urine samples were collected for the determination of urinary BPA, creatinine, and urinary iodine concentrations (UIC). Thyroid volume (TV) and nodules were assessed by thyroid ultrasonography. Results The median of TV was 3.14ml. 459(63.9%) children took iodized salt at home and the median of UIC was 159μg/l. BPA was detected in 99.9% of the urine samples and the medians for boys and girls were 2.64 and 2.35μg/g creatinine, respectively. Of all participants 14.0% had thyroid nodules. Urinary BPA concentration was inversely associated with thyroid volume (β = -0.033, 95% CI: -0.053, -0.013) and the risk for multiple nodules (OR = 0.78; 95% CI: 0.63, 0.97). The associations above were similar for children who consumed iodized salt and those consumed non-iodized salt. Conclusions The data suggest that BPA may be one of the influencing factors for TV and thyroid nodules and its effects are independent of iodine nutrition status in children. PMID:26496713

Energy data report: prices and margins of No. 2 distillate fuel oil. Monthly report, January 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whatley, A.

1982-03-22

Data are presented on the average prices and gross margins for the refining, reselling, and retailing sectors of the No. 2 distillate fuel oil market. Data are tabulated on prices and sales volumes of No. 2 fuel oil and No. 2 diesel fuel for residential, industrial/commercial, institutional/utility, other ultimate consumer sales, and nonultimate consumer sales. A brief discussion of the sampling and estimation procedures used in this report appears in the appendix.

Energy data report: prices and margins of No. 2 distillate fuel oil. Monthly report, October 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whatley, A.

1982-12-20

Data are presented on the average prices and gross margins for the refining, reselling, and retailing sectors of the No. 2 distillate fuel oil market. Data are tabulated on prices and sales volumes of No. 2 fuel oil and No. 2 diesel fuel for residential, industrial/commercial, institutional/utility, other ultimate consumer sales, and nonultimate consumer sales. A brief discussion of the sampling and estimation procedures used in this report appears in the appendix.

Energy data report: prices and margins of No. 2 distillate fuel oil. Monthly report, November 1982

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whatley, A.

1983-01-18

Data are presented on the average prices and gross margins for the refining, reselling, and retailing sectors of the No. 2 distillate fuel oil market. Data are tabulated on prices and sales volumes of No. 2 fuel oil and No. 2 diesel fuel for residential, industrial/commercial, institutional/utility, other ultimate consumer sales, and nonultimate consumer sales. A brief discussion of the sampling and estimation procedures used in this report appears in the appendix.

Energy data report: prices and margins of No. 2 distillate fuel oil. Monthly report, December 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whatley, A.

1982-02-22

Data are presented on the average prices and gross margins for the refining, reselling, and retailing sectors of the No. 2 distillate fuel oil market. Data are tabulated on prices and sales volumes of No. 2 fuel oil and No. 2 diesel fuel for residential, industrial/commercial, institutional/utility, other ultimate consumer sales, and nonultimate consumer sales. A brief discussion of the sampling and estimation procedures used in this report appears in the appendix.

Motorists' knowledge, attitudes and practices toward alcohol-impaired driving/riding in Ghana.

PubMed

Damsere-Derry, James; Palk, Gavan; King, Mark

2017-01-02

The main objective of this study was to establish the knowledge, attitudes, and practices toward drink driving/riding as a risk factor for road traffic crashes in 3 regional capitals in Ghana. The study used a face-to-face approach to randomly sample motorists who were accessing various services at fuel/gas stations, garages, and lorry terminals in 3 cities in Ghana. Over the previous 12 months, 24% of all motorists and 55% of motorists who were current alcohol users reported driving or riding a vehicle within an hour of alcohol intake. On average, motorists/riders who were current alcohol users consumed 4 standard drinks per drinking occasion. Generally, 83% of motorists who currently use alcohol walked, rode, or drove home after consuming alcohol away from their homes. Motorists/riders who reported drink driving were 4 times more likely to have had previous traffic violation arrests compared to those who reported no drink driving/riding (P =.001). Respondents were of the opinion that speeding was the major cause of traffic crashes, followed by driver carelessness, poor road conditions, inexperienced driving, and drink driving, in that order. Thirty-six percent of motorists who use alcohol had the perception that consuming between 6 and 15 standard drinks was the volume of alcohol that will take them to the legal blood alcohol concentration (BAC) limit of 0.08%. Compared to females, male motorists/riders were more likely to report drink driving (adjusted odds ratio [AOR] = 5.15; 95% confidence interval [CI], 2.31 to 11.47). Private motorists also reported a higher likelihood of drink driving compared to commercial drivers (AOR = 3.36; 95% CI, 1.88 to 6.02). Only 4% of motorists knew the legal BAC limit of Ghana and only 2% had ever been tested for drink driving/riding. The volumes of alcohol that motorists typically consume per drinking occasion were very high and their estimates of the number of drinks required to reach the legal BAC limit was also very high. Provision of authoritative information advising motorists about safe, responsible, or low-risk levels of alcohol consumption is imperative. Many traffic violations including drink driving were reported, thus suggesting a need for enhanced policing and enforcement. However, given the low level of knowledge of the legal BAC limit, educating motorists about how many drinks will approximate the legal BAC should be intensified prior to an increase in enforcement; otherwise, the desired outcome of enforcement may not be achieved.

Military display market: third comprehensive edition

NASA Astrophysics Data System (ADS)

Desjardins, Daniel D.; Hopper, Darrel G.

2002-08-01

Defense displays comprise a niche market whose continually high performance requirements drive technology. The military displays market is being characterized to ascertain opportunities for synergy across platforms, and needs for new technology. All weapons systems are included. Some 382,585 displays are either now in use or planned in DoD weapon systems over the next 15 years, comprising displays designed into direct-view, projection-view, and virtual- image-view applications. This defense niche market is further fractured into 1163 micro-niche markets by the some 403 program offices who make decisions independently of one another. By comparison, a consumer electronics product has volumes of tens-of-millions of units for a single fixed design. Some 81% of defense displays are ruggedized versions of consumer-market driven designs. Some 19% of defense displays, especially in avionics cockpits and combat crewstations, are custom designs to gain the additional performance available in the technology base but not available in consumer-market-driven designs. Defense display sizes range from 13.6 to 4543 mm. More than half of defense displays are now based on some form of flat panel display technology, especially thin-film-transistor active matrix liquid crystal display (TFT AMLCD); the cathode ray tube (CRT) is still widely used but continuing to drop rapidly in defense market share.

Multi-species generalist predation on the stochastic harvested clam Tivela mactroides (Mollusca, Bivalvia)

NASA Astrophysics Data System (ADS)

Turra, Alexander; Fernandez, Wellington S.; Bessa, Eduardo; Santos, Flavia B.; Denadai, Márcia R.

2015-12-01

Top-down control is an important force modulating the abundance of prey and structuring marine communities. The harvested trigonal clam Tivela mactroides is hypothesized to be part of the diet of a variety of marine organisms, with its stock influencing predator abundance and being influenced by them. Here we analyzed the diet of potential predators of T. mactroides in Caraguatatuba Bay, northern coast of São Paulo State, Brazil, to identify the main consumers of this marine resource, and also to address the importance of this clam in the diet of each predator. Samples were taken year-round by trawls; all specimens collected were identified and measured and the food items identified and quantified. Twenty-one species consumed T. mactroides, whose importance in the diet varied greatly in both the volume ingested and the frequency of occurrence (pompano Trachinotus carolinus > blue crab Callinectes danae > starfish Astropecten marginatus). Top-down influence on T. mactroides was also dependent on the abundance of consumers (yellow catfish Cathorops spixii > rake stardrum Stellifer rastrifer > barred grunt Conodon nobilis > A. marginatus). Considering the mean volume ingested, the frequency of occurrence of T. mactroides in the diet, and the relative abundance of consumers, the predators that most influenced T. mactroides were T. carolinus, A. marginatus, and C. danae, in decreasing order. Large numbers of small-sized individuals of T. mactroides (<10 mm) were generally preyed upon by A. marginatus, which may have a stronger effect on clam abundance in comparison to C. danae and T. carolinus, which preyed upon larger clams. In conclusion, the results of this study indicate that predators' consumption of T. mactroides in Caraguatatuba Bay can influence its stocks, mainly due to the type and/or abundance of predator species, the volume and number of individuals of T. mactroides preyed upon, and the temporal variations in the abundance of predators.

38 CFR 21.5820 - Educational assistance.

Code of Federal Regulations, 2010 CFR

2010-07-01

... consumable materials used as part of classroom or laboratory instruction. (2) Educational expenses may not... benefits from the educational assistance test program. (Authority: 10 U.S.C. 2143(a)) (b) Amount of... printed volume and on GPO Access. ...

Reversal of bedrest-induced orthostatic intolerance by lower body negative pressure and saline

NASA Technical Reports Server (NTRS)

Hyatt, K. H.; West, D. A.

1977-01-01

Six healthy male volunteers underwent two 1-week periods of bedrest, each preceded and followed by 2-week control and recovery periods. The daily metabolic diet contained 150 mEq of sodium. Following one 7-day bedrest period, each man was subjected to LBNP at a level of -30 mm Hg for 4 hr while consuming 1000 ml of beef bouillon containing 154 mEq of sodium. After the other bedrest period, each man simply consumed the bouillon without LBNP treatment during 4 hr of continued bedrest. Measurements of plasma volume and orthostatic tolerance were made before and after each treatment period. After combined LBNP and saline therapy, plasma volume and response to LBNP testing showed a return to pre-bedrest levels. Saline consumption alone had a lesser effect. With continuation of bedrest in three subjects, the beneficial effects of these measures appeared to be largely gone after 18 hr.

Solar economy and technology update

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brotherton, T.K.

The industry, national, and consumer perspectives on solar power are reviewed. With a 30% increase in dealer/installers, and a 30% attrition rate, about 60% of the participants in the market are ''new kids on the block.'' The installed value of the market was $750 million in 1981. There was a 30% decline in volumes, due to the recession, in 1982. As for the national perspective, solar is labor intensive, and generated a billion dollars worth of jobs. As the DOE has abandoned all but high risk ''core technology'' RandD has faltered some. But desiccant heat pumps, polymer collectors, and parabolicmore » collectors are discussed.« less

Effect of grapefruit juice volume on the reduction of fexofenadine bioavailability: possible role of organic anion transporting polypeptides.

PubMed

Dresser, George K; Kim, Richard B; Bailey, David G

2005-03-01

The purpose of this study was to elucidate the potential clinical relevance and mechanism(s) of action of 2 different volumes of grapefruit juice on the reduction of bioavailability of fexofenadine, a substrate of organic anion transporting polypeptides. Grapefruit juice or water at normal (300 mL) or high (1200 mL) volume was ingested concomitantly with 120 mg fexofenadine by 12 healthy volunteers in a randomized 4-way crossover study, and fexofenadine pharmacokinetics were determined over a period of 8 hours. The 300-mL volume of grapefruit juice decreased the mean area under the plasma drug concentration-time curve (AUC) and the peak plasma drug concentration of fexofenadine to 58% (P < .001) and 53% (P < .001), respectively, of those with the corresponding volume of water, and 1200 mL grapefruit juice reduced these parameters to 36% ( P < .001) and 33% ( P < .001), respectively, of those with the corresponding volume of water. The 300-mL volume of grapefruit juice diminished the AUC of fexofenadine variably among individuals. This decline correlated with baseline AUC of fexofenadine with water at equivalent volume (r(2) = 0.97, P < .0001). The 1200-mL volume of grapefruit juice decreased the AUC of fexofenadine more than the 300-mL volume of grapefruit juice compared with the corresponding volume of water in each subject by a constant amount. Grapefruit juice, 300 mL and 1200 mL, reduced the coefficient of variation of the AUC of fexofenadine by 2-fold compared with that with a matching volume of water. Grapefruit juice at a commonly consumed volume diminished the oral bioavailability of fexofenadine sufficiently to be pertinent clinically, likely by direct inhibition of uptake by intestinal organic anion transporting polypeptide A (OATP-A; new nomenclature, OATP1A2). A much higher volume caused an additional modest effect, possibly from reduced intestinal concentration and transit time of fexofenadine. This food-drug interaction appears to be novel and may be relevant to other fruit juices and drugs.

Drinking Context and Intimate Partner Violence: Evidence From the California Community Health Study of Couples

PubMed Central

Cunradi, Carol B.; Mair, Christina; Todd, Michael; Remer, Lillian

2012-01-01

Objective: Couples in which one or both partners is a heavy or problem drinker are at elevated risk for intimate partner violence (IPV), yet little is known about the extent to which each partner’s drinking in different contexts (volume consumed per setting in bars, parties, at home, or in public places) increases the likelihood that partner aggression will occur. This study examined associations between the volume consumed in different settings by each partner and the occurrence and frequency of IPV. Method: We obtained a geographic sample of married or cohabiting couples residing in 50 medium to large California cities. Cross-sectional survey data were collected via confidential telephone interviews (60% response rate). Logistic and negative binomial regression analyses were based on 1,585 couples who provided information about past-12-month IPV, drinking contexts (number of times attended, proportion of drinking occasions when attended, average number of drinks), frequency of intoxication, and psychosocial and demographic factors. Drinking context–IPV associations for each partner were adjusted for the other partner’s volume for that context and other covariates. Results: Male partner’s volume per setting for bars and parks or public places was associated with the occurrence and frequency of male-to-female IPV and female-to-male IPV. Male’s volume per setting for quiet evening at home was associated with the occurrence of female-to-male IPV; female partner’s volume for this setting was associated with the frequency of male-to-female IPV and female-to-male IPV. Conclusions: Among couples in the general population, each partner’s drinking in certain contexts is an independent risk factor for the occurrence and frequency of partner aggression. PMID:22846237

Scalable and Interactive Segmentation and Visualization of Neural Processes in EM Datasets

PubMed Central

Jeong, Won-Ki; Beyer, Johanna; Hadwiger, Markus; Vazquez, Amelio; Pfister, Hanspeter; Whitaker, Ross T.

2011-01-01

Recent advances in scanning technology provide high resolution EM (Electron Microscopy) datasets that allow neuroscientists to reconstruct complex neural connections in a nervous system. However, due to the enormous size and complexity of the resulting data, segmentation and visualization of neural processes in EM data is usually a difficult and very time-consuming task. In this paper, we present NeuroTrace, a novel EM volume segmentation and visualization system that consists of two parts: a semi-automatic multiphase level set segmentation with 3D tracking for reconstruction of neural processes, and a specialized volume rendering approach for visualization of EM volumes. It employs view-dependent on-demand filtering and evaluation of a local histogram edge metric, as well as on-the-fly interpolation and ray-casting of implicit surfaces for segmented neural structures. Both methods are implemented on the GPU for interactive performance. NeuroTrace is designed to be scalable to large datasets and data-parallel hardware architectures. A comparison of NeuroTrace with a commonly used manual EM segmentation tool shows that our interactive workflow is faster and easier to use for the reconstruction of complex neural processes. PMID:19834227

7 CFR 1209.303 - Instructions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Procedure for the Conduct of Referenda in Connection With the Mushroom Promotion... eligible voter; (2) The total volume of mushrooms produced by the voting producer during the representative...

7 CFR 1209.303 - Instructions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Procedure for the Conduct of Referenda in Connection With the Mushroom Promotion... eligible voter; (2) The total volume of mushrooms produced by the voting producer during the representative...

7 CFR 1209.303 - Instructions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Procedure for the Conduct of Referenda in Connection With the Mushroom Promotion... eligible voter; (2) The total volume of mushrooms produced by the voting producer during the representative...

7 CFR 1209.303 - Instructions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Procedure for the Conduct of Referenda in Connection With the Mushroom Promotion... eligible voter; (2) The total volume of mushrooms produced by the voting producer during the representative...

7 CFR 1209.303 - Instructions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MUSHROOM PROMOTION, RESEARCH, AND CONSUMER INFORMATION ORDER Procedure for the Conduct of Referenda in Connection With the Mushroom Promotion... eligible voter; (2) The total volume of mushrooms produced by the voting producer during the representative...

Succinic acid: technology development and commercialization

USDA-ARS?s Scientific Manuscript database

Succinic acid is a precursor of many important, large volume industrial chemicals and consumer products. It was common knowledge that many ruminant microorganisms accumulated succinic acid under anaerobic conditions. However, it was not until the discovery of Anaerobiospirillum succiniciproducens at...

Biotreatment from hot bugs to cold ducks

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-02-01

There are few forms of industrial wastes that cannot be neutralized and disposed of using modern treatment methods. The challenge is to control costs and minimize liability. Such is the quandary for waste treatment facilities dealing with biological sludge. One way to reduce sludge volume is to use a high-temperature aerobic treatment process, such as the one recently commercialized by US Filter. The process relies on a strain of bacteria heated to 50--65 C. The high temperatures destroy pathogens and speed metabolism. Cultivated in a lagoon or pond treatment system, the duckweed floats on top of the water and feedsmore » on the organics. The plants consume nitrogen, ammonia and phosphoric compounds, help retain aerobic conditions in the pond, and control algae growth by blocking sunlight.« less

Thermoregulation During Extended Exercise in the Heat: Comparisons of Fluid Volume and Temperature.

PubMed

Hailes, Walter S; Cuddy, John S; Cochrane, Kyle; Ruby, Brent C

2016-09-01

This study aimed to determine the physiological and thermoregulatory responses of individuals exercising in the heat (US military red flag conditions, wet-bulb globe temperature 31.5-32.2ºC) while consuming varied volumes of ambient temperature water and ice slurry. Participants (N = 12) walked on a treadmill for 3 hours at approximately 40% peak aerobic capacity in a hot environment while consuming ambient temperature (35.5°C) water (W), ice slurry (0°C, two-thirds shaved ice and one-third water) at a ratio of 2 g·kg(-1) body mass every 10 minutes (FS), and reduced volume ice slurry as described at a rate of 1 g·kg(-1) body mass every 10 minutes (HS). Trials were completed at least 14 days apart, in a randomized, repeated measures design. Percent body weight loss was higher during the HS trial (1.8 ± 0.01%) compared with FS (0.5 ± 0.01%; P < .001) and W (0.6 ± 0.01%; P < .001). Mean rectal temperature at 3 hours was lower during FS (37.8 ± 0.7°C) compared with HS (38.1 ± 0.8°C) and W (38.2 ± 0.8°C) (P = .04 vs HS, and P = .005 vs W, main effect for trial). No differences were found in rectal temperature between HS and W. Heart rate was lower at the end of the third hour during FS (141 ± 10 beats/min) compared with HS (157 ± 19 beats/min) and W (154 ± 18 beats/min) (P = .001 and P = .007, respectively, time × trial interaction). There were no differences in heart rate between HS and W. The temperature of consumed fluids may be as important as the volume for the management of thermoregulation and other physiological responses for extended work in hot environments. Copyright © 2016 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

Dairy intake in relation to breast and pubertal development in Chilean girls.

PubMed

Gaskins, Audrey J; Pereira, Ana; Quintiliano, Daiana; Shepherd, John A; Uauy, Ricardo; Corvalán, Camila; Michels, Karin B

2017-05-01

Background: Frequent dairy consumption in childhood has been related to higher growth-hormone concentrations that may affect mammary gland and pubertal development. Objective: We evaluated the relation of dairy intake to breast composition at Tanner stage 4 and age at menarche. Design: A total of 515 Chilean girls are included in the Growth and Obesity Cohort Study. The subjects have been followed longitudinally since they were 3-4 y old (from 2006 to the present). Starting in 2013, diet was assessed every 6 mo via a 24-h recall. The breast fibroglandular volume (FGV) was measured with the use of dual-energy X-ray absorptiometry at Tanner stage 4. The date of menarche was reported every 6 mo. Our analysis included 290 girls with data on prospective diet and breast composition and 324 girls with data on prospective diet and age at menarche. Results: The mean ± SD breast FGV and percentage of fibroglandular volume (%FGV) (i.e., FGV divided by total breast volume times 100) at Tanner stage 4 was 81.7 ± 32.2 cm 3 and 42.0% ± 16.7%, respectively. Only sweetened, artificially flavored milk-based drinks were associated with the %FGV with girls who consumed >125 g/d having a %FGV that was 4.5% (95% CI: 0.9%, 8.1%) higher than that of girls who consumed none ( P -trend = 0.007). Yogurt intake was associated with a lower FGV. Specifically, girls who consumed >125 g yogurt/d had -10.2 cm 3 (95% CI: -20.2, -0.3 cm 3 ) less FGV than did girls who consumed no yogurt ( P -trend = 0.03). The majority (90.7%) of girls in our cohort attained menarche before the data analyses with a mean ± SD age at menarche of 11.9 ± 0.7 y. In multivariable models, low-fat dairy, low-fat milk, and yogurt intakes were associated with a later age at menarche. In particular, girls who consumed >125 g yogurt/d had menarche, on average, 4.6 mo (95% CI: 1.9, 7.4 mo) later than girls who consumed no yogurt ( P -trend = 0.01). Conclusion: More-frequent consumption of sweetened, artificially-flavored milk-based drinks is associated with a higher %FGV, whereas higher yogurt intake is associated with a lower FGV and delayed age at menarche in Chilean girls. © 2017 American Society for Nutrition.

NDE of hybrid armor structures using acoustography

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sandhu, Jaswinder S.; Pergantis, Charles G.

2011-06-23

The US Army is investigating the use of composite materials to deliver lightweight and more effective armor protection systems to soldiers and other army assets. However, widespread use of such hybrid armor will require a reliable but fast NDE methodology to ensure integrity of these components during manufacturing and while in service. Traditional ultrasonic inspection of such hybrid armor structures may prove to be very effective, but point-by-point ultrasonic scanning is inherently time-consuming and manufacturing slowdowns could develop in high-volume production of such armor systems. In this paper, we report on the application of acoustography for the NDE of hybridmore » armor structures. Acoustography differs from conventional ultrasonic testing in that test objects are inspected in full field, analogously to real time x-ray imaging. The approach uses a novel, super high resolution large area acousto-optic (AO) sensor, which allows image formation through simple ultrasound shadow casting, analogous to x-ray image formation. This NDE approach offers significant inspection speed advantage over conventional point-by-point ultrasonic scanning procedures and is well-suited for high volume production. We will report initial results on a number of hybrid armor plate specimens employing composite materials that are being investigated by the US Army. Acoustography NDE results will also be verified using other complimentary NDE methods.« less

Dr Google Is Here to Stay but Health Care Professionals Are Still Valued: An Analysis of Health Care Consumers' Internet Navigation Support Preferences.

PubMed

Lee, Kenneth; Hoti, Kreshnik; Hughes, Jeffery David; Emmerton, Lynne

2017-06-14

The Internet offers great opportunities for consumers to be informed about their health. However, concerns have been raised regarding its impact on the traditional health consumer-health professional relationship. Our recent survey of 400 Australian adults identified that over half of consumers required some form of navigational support in locating appropriate Web-based health information. We propose that support provided by health professionals would be preferred by consumers; this preference is regardless of whether consumers have a need for navigational support. Secondary analysis of the survey dataset is presented here to quantify consumer-reported support preferences and barriers when navigating Web-based health information. We aimed to quantitatively identify consumers' support preferences for locating Web-based health information and their barriers when navigating Web-based health information. We also aimed to compare such preferences and barriers between consumers identified as needing and not needing support when locating Web-based health information. Chi-square (χ 2 ) tests identified whether each listed support preference differed between subgroups of consumers classified as needing (n=205, 51.3%) or not needing (n=195, 48.8%) navigational support; degree of association, via phi coefficient (φ) tests, were also considered to ascertain the likely practical significance of any differences. This was repeated for each listed barrier. Free-text responses regarding additional support preferences were descriptively analyzed and compared with the quantitative findings to provide a richer understanding of desired support for health information searches. Of the 400 respondents, the most preferred mode of navigational support was involvement of health professionals; this was reported by participants identified as needing and not needing navigational support. While there was a significant difference between groups, the degree of association was small (χ 2 1 [N=400]=13.2; P<.001; φ=.18). Qualitative data from the free-text responses supported consumers' desire for health professional involvement. The two most commonly reported barriers when navigating desired Web-based health information were (1) volume of available information and (2) inconsistency of information between sources; these were reported by participants with and without a need for navigational support. While participants identified with a need for navigational support were more likely to report volume (χ 2 1 [N=387]= 4.40; P=.04; φ=.11) and inconsistency of information (χ 2 1 [N=387]= 16.10, P<.001, φ=.20) as barriers, the degrees of association were small to moderate. Despite concerns in the literature that the popularity of the Internet could compromise the health consumer-health professional relationship, our findings suggest the contrary. Our findings showed that health professionals were found to be the most commonly preferred mode of navigational support, even among consumers classified as not needing navigational support. Further research into how health professionals could assist consumers with Web-based health information seeking could strengthen the health consumer-health professional relationship amidst the growing use of "Dr Google." ©Kenneth Lee, Kreshnik Hoti, Jeffery David Hughes, Lynne Emmerton. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 14.06.2017.

Natural mineral bottled waters available on the Polish market as a source of minerals for the consumers. Part 1. Calcium and magnesium.

PubMed

Gątarska, Anna; Tońska, Elżbieta; Ciborska, Joanna

2016-01-01

Natural mineral waters may be an essential source of calcium, magnesium and other minerals. In bottled waters, minerals occur in an ionized form which is very well digestible. However, the concentration of minerals in underground waters (which constitute the material for the production of bottled waters) varies. In view of the above, the type of water consumed is essential. The aim of the study was to estimate the calcium and magnesium contents in products available on the market and to evaluate calcium and magnesium consumption with natural mineral water by different consumer groups with an assumed volume of the consumed product. These represented forty different brands of natural mineral available waters on Polish market. These waters were produced in Poland or other European countries. Among the studied products, about 30% of the waters were imported from Lithuania, Latvia, Czech Republic, France, Italy and Germany. The content of calcium and magnesium in mineral waters was determined using flame atomic absorption spectrometry in an acetylene-air flame. Further determinations were carried out using atomic absorption spectrometer--ICE 3000 SERIES-THERMO-England, equipped with a GLITE data station, background correction (a deuterium lamp) as well as other cathode lamps. Over half of the analysed natural mineral waters were medium-mineralized. The natural mineral waters available on the market can be characterized by a varied content of calcium and magnesium and a high degree of product mineralization does not guarantee significant amounts of these components. Among the natural mineral waters available on the market, only a few feature the optimum calcium-magnesium proportion (2:1). Considering the mineralization degree of the studied products, it can be stated that the largest percentage of products with significant calcium and magnesium contents can be found in the high-mineralized water group. For some natural mineral waters, the consumption of 1 litre daily may ensure the recommended intake levels of calcium and magnesium in some consumer groups to a considerable degree. For 1-3-year-old children it is recommended to consume less than 1 litre daily of natural mineral waters containing an excess of 700 mg of calcium and 80 mg of magnesium in 1 litre.

Is Satisfaction with the Acute-Care Experience Higher amongst Consumers Treated in the Private Sector? A Survey of Public and Private Sector Arthroplasty Recipients.

PubMed

Naylor, Justine M; Descallar, Joseph; Grootemaat, Mechteld; Badge, Helen; Harris, Ian A; Simpson, Grahame; Jenkin, Deanne

2016-01-01

Consumer satisfaction with the acute-care experience could reasonably be expected to be higher amongst those treated in the private sector compared to those treated in the public sector given the former relies on high-level satisfaction of its consumers and their subsequent recommendations to thrive. The primary aims of this study were to determine, in a knee or hip arthroplasty cohort, if surgery in the private sector predicts greater overall satisfaction with the acute-care experience and greater likelihood to recommend the same hospital. A secondary aim was to determine whether satisfaction across a range of service domains is also higher in the private sector. A telephone survey was conducted 35 days post-surgery. The hospital cohort comprised eight public and seven private high-volume arthroplasty providers. Consumers rated overall satisfaction with care out of 100 and likeliness to recommend their hospital on a 5-point Likert scale. Additional Likert-style questions were asked covering specific service domains. Generalized estimating equation models were used to analyse overall satisfaction (dichotomised as ≥ 90 or < 90) and future recommendations for care (dichotomised as 'definitely recommend' or 'other'), whilst controlling for covariates. The proportions of consumers in each sector reporting the best Likert response for each individual domain were compared using non-parametric tests. 457 survey respondents (n = 210 private) were included. Less patient-reported joint impairment pre-surgery [OR 1.03 (95% CI 1.01-1.05)] and absence of an acute complication (OR 2.13 95% CI 1.41-3.23) significantly predicted higher overall satisfaction. Hip arthroplasty [OR 1.84 (1.1-2.96)] and an absence of an acute complication [OR 2.31 (1.28-4.17] significantly predicted greater likelihood for recommending the hospital. The only care domains where the private out-performed the public sector were hospitality (46.7 vs 35.6%, p <0.01) and frequency of surgeon visitation (76.4 vs 65.8%, p = 0.03). Arthroplasty consumers treated in the private sector are not more satisfied with their acute-care experience nor are they more likely to recommend their hospital provider. Rather, avoidance of complications in either sector appears to result in improved satisfaction as well as a greater likelihood that patients would recommend their hospital provider.

Surgical patient selection and counseling.

PubMed

Ziegelmann, Matt; Köhler, Tobias S; Bailey, George C; Miest, Tanner; Alom, Manaf; Trost, Landon

2017-08-01

The objectives of patient selection and counseling are ultimately to enhance successful outcomes. However, the definition for success is often narrowly defined in published literature (ability to complete surgery, complications, satisfaction) and fails to account for patient desires and expectations, temporal changes, natural history of underlying diseases, or independent validation. Factors associated with satisfaction and dissatisfaction are often surgery-specific, although correlation with pre-operative expectations, revisions, and complications are common with most procedures. The process of appropriate patient selection is determined by the integration of patient and surgeon factors, including psychological capacity to handle unsatisfactory results, baseline expectations, complexity of case, and surgeon volume and experience. Using this model, a high-risk scenario includes one in which a low-volume surgeon performs a complex case in a patient with limited psychological capacity and high expectations. In contrast, a high-volume surgeon performing a routine case in a male with low expectations and abundant psychiatric reserve is more likely to achieve a successful outcome. To further help identify patients who are at high risk for dissatisfaction, a previously published mnemonic is recommended: CURSED Patient (compulsive/obsessive, unrealistic, revision, surgeon shopping, entitled, denial, and psychiatric). Appropriate patient counseling includes setting appropriate expectations, reviewing the potential and anticipated risks of surgery, post-operative instruction to limit complications, and long-term follow-up. As thorough counseling is often a time-consuming endeavor, busy practices may elect to utilize various resources including educational materials, advanced practice providers, or group visits, among others. The consequences for poor patient selection and counseling may range from poor surgical outcomes and patient dissatisfaction to lawsuits, loss of credibility, or even significant patient or personal harm.

Surgical patient selection and counseling

PubMed Central

Ziegelmann, Matt; Köhler, Tobias S.; Bailey, George C.; Miest, Tanner; Alom, Manaf

2017-01-01

The objectives of patient selection and counseling are ultimately to enhance successful outcomes. However, the definition for success is often narrowly defined in published literature (ability to complete surgery, complications, satisfaction) and fails to account for patient desires and expectations, temporal changes, natural history of underlying diseases, or independent validation. Factors associated with satisfaction and dissatisfaction are often surgery-specific, although correlation with pre-operative expectations, revisions, and complications are common with most procedures. The process of appropriate patient selection is determined by the integration of patient and surgeon factors, including psychological capacity to handle unsatisfactory results, baseline expectations, complexity of case, and surgeon volume and experience. Using this model, a high-risk scenario includes one in which a low-volume surgeon performs a complex case in a patient with limited psychological capacity and high expectations. In contrast, a high-volume surgeon performing a routine case in a male with low expectations and abundant psychiatric reserve is more likely to achieve a successful outcome. To further help identify patients who are at high risk for dissatisfaction, a previously published mnemonic is recommended: CURSED Patient (compulsive/obsessive, unrealistic, revision, surgeon shopping, entitled, denial, and psychiatric). Appropriate patient counseling includes setting appropriate expectations, reviewing the potential and anticipated risks of surgery, post-operative instruction to limit complications, and long-term follow-up. As thorough counseling is often a time-consuming endeavor, busy practices may elect to utilize various resources including educational materials, advanced practice providers, or group visits, among others. The consequences for poor patient selection and counseling may range from poor surgical outcomes and patient dissatisfaction to lawsuits, loss of credibility, or even significant patient or personal harm. PMID:28904893

Encyclopedia Publishing: An Update

ERIC Educational Resources Information Center

Kister, Kenneth

1978-01-01

Problems discussed include difficulty of keeping pace with the "knowledge explosion" and rapidly changing social attitudes, higher production costs vs. declining sales, consumer dissatisfaction with sales tactics, and intellectual snobbery towards the product. Trends are the single volume edition, improved sales techniques, and publisher…

Predicting diet and consumption rate differences between and within species using gut ecomorphology.

PubMed

Griffen, Blaine D; Mosblack, Hallie

2011-07-01

1. Rapid environmental changes and pressing human needs to forecast the consequences of environmental change are increasingly driving ecology to become a predictive science. The need for effective prediction requires both the development of new tools and the refocusing of existing tools that may have previously been used primarily for purposes other than prediction. One such tool that historically has been more descriptive in nature is ecomorphology (the study of relationships between ecological roles and morphological adaptations of species and individuals). 2. Here, we examine relationships between diet and gut morphology for 15 species of brachyuran crabs, a group of pervasive and highly successful consumers for which trophic predictions would be highly valuable. 3. We show that patterns in crab stomach volume closely match some predictions of metabolic theory and demonstrate that individual diet differences and associated morphological variation reflect, at least in some instances, individual choice or diet specialization. 4. We then present examples of how stomach volume can be used to predict both the per cent herbivory of brachyuran crabs and the relative consumption rates of individual crabs. © 2011 The Authors. Journal of Animal Ecology © 2011 British Ecological Society.

Differences among consumer segments with regard to perceptions of comparative effectiveness research.

PubMed

Williams, Sunyna S; Frost, Sloane L

2014-11-01

To examine differences among health-related decision-making consumer segments with regard to knowledge, skills, attitudes, and behaviors pertinent to comparative effectiveness research. Data were collected via an online survey from 603 adults with chronic conditions. Consumer segment was determined using a two-item tool. Active consumers (high skills and motivation) reported the highest levels of engagement in various behaviors. Passive consumers (low skills and motivation) reported the lowest levels of engagement in various behaviors. High-effort consumers (low skills, high motivation) reported more positive attitudes and opinions and more engagement in various behaviors than did complacent consumers (high skills, low motivation). Effective translation and dissemination of comparative effectiveness research will require the development of approaches tailored to consumers with varying levels of skills and motivation.

MEMS reliability: coming of age

NASA Astrophysics Data System (ADS)

Douglass, Michael R.

2008-02-01

In today's high-volume semiconductor world, one could easily take reliability for granted. As the MOEMS/MEMS industry continues to establish itself as a viable alternative to conventional manufacturing in the macro world, reliability can be of high concern. Currently, there are several emerging market opportunities in which MOEMS/MEMS is gaining a foothold. Markets such as mobile media, consumer electronics, biomedical devices, and homeland security are all showing great interest in microfabricated products. At the same time, these markets are among the most demanding when it comes to reliability assurance. To be successful, each company developing a MOEMS/MEMS device must consider reliability on an equal footing with cost, performance and manufacturability. What can this maturing industry learn from the successful development of DLP technology, air bag accelerometers and inkjet printheads? This paper discusses some basic reliability principles which any MOEMS/MEMS device development must use. Examples from the commercially successful and highly reliable Digital Micromirror Device complement the discussion.

Natural gas annual 1992: Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-11-22

This document provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and education institutions. The 1992 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production top its end use. Tables summarizing natural gas supply and disposition from 1988 to 1992 are given for each Census Division and each State. Annual historical data are shown at the national level. Volume 2 of this report presents State-level historical data.

A rapid and high-throughput microplate spectrophotometric method for field measurement of nitrate in seawater and freshwater.

PubMed

Wu, Jiapeng; Hong, Yiguo; Guan, Fengjie; Wang, Yan; Tan, Yehui; Yue, Weizhong; Wu, Meilin; Bin, Liying; Wang, Jiaping; Wen, Jiali

2016-02-01

The well-known zinc-cadmium reduction method is frequently used for determination of nitrate. However, this method is seldom to be applied on field research of nitrate due to the long time consuming and large sample volume demand. Here, we reported a modified zinc-cadmium reduction method (MZCRM) for measurement of nitrate at natural-abundance level in both seawater and freshwater. The main improvements of MZCRM include using small volume disposable tubes for reaction, a vortex apparatus for shaking to increase reduction rate, and a microplate reader for high-throughput spectrophotometric measurements. Considering salt effect, two salinity sections (5~10 psu and 20~35 psu) were set up for more accurate determination of nitrate in low and high salinity condition respectively. Under optimized experimental conditions, the reduction rates were stabilized on 72% and 63% on the salinity of 5 and 20 psu respectively. The lowest detection limit for nitrate was 0.5 μM and was linear up to 100 μM (RSDs was 4.8%). Environmental samples assay demonstrated that MZCRM was well consistent with conventional zinc-cadmium reduction method. In total, this modified method improved accuracy and efficiency of operations greatly, and would be realized a rapid and high-throughput determination of nitrate in field analysis of nitrate with low cost.

Predicting Consumer Biomass, Size-Structure, Production, Catch Potential, Responses to Fishing and Associated Uncertainties in the World's Marine Ecosystems.

PubMed

Jennings, Simon; Collingridge, Kate

2015-01-01

Existing estimates of fish and consumer biomass in the world's oceans are disparate. This creates uncertainty about the roles of fish and other consumers in biogeochemical cycles and ecosystem processes, the extent of human and environmental impacts and fishery potential. We develop and use a size-based macroecological model to assess the effects of parameter uncertainty on predicted consumer biomass, production and distribution. Resulting uncertainty is large (e.g. median global biomass 4.9 billion tonnes for consumers weighing 1 g to 1000 kg; 50% uncertainty intervals of 2 to 10.4 billion tonnes; 90% uncertainty intervals of 0.3 to 26.1 billion tonnes) and driven primarily by uncertainty in trophic transfer efficiency and its relationship with predator-prey body mass ratios. Even the upper uncertainty intervals for global predictions of consumer biomass demonstrate the remarkable scarcity of marine consumers, with less than one part in 30 million by volume of the global oceans comprising tissue of macroscopic animals. Thus the apparently high densities of marine life seen in surface and coastal waters and frequently visited abundance hotspots will likely give many in society a false impression of the abundance of marine animals. Unexploited baseline biomass predictions from the simple macroecological model were used to calibrate a more complex size- and trait-based model to estimate fisheries yield and impacts. Yields are highly dependent on baseline biomass and fisheries selectivity. Predicted global sustainable fisheries yield increases ≈4 fold when smaller individuals (< 20 cm from species of maximum mass < 1 kg) are targeted in all oceans, but the predicted yields would rarely be accessible in practice and this fishing strategy leads to the collapse of larger species if fishing mortality rates on different size classes cannot be decoupled. Our analyses show that models with minimal parameter demands that are based on a few established ecological principles can support equitable analysis and comparison of diverse ecosystems. The analyses provide insights into the effects of parameter uncertainty on global biomass and production estimates, which have yet to be achieved with complex models, and will therefore help to highlight priorities for future research and data collection. However, the focus on simple model structures and global processes means that non-phytoplankton primary production and several groups, structures and processes of ecological and conservation interest are not represented. Consequently, our simple models become increasingly less useful than more complex alternatives when addressing questions about food web structure and function, biodiversity, resilience and human impacts at smaller scales and for areas closer to coasts.

Estimation of packaged water consumption and associated plastic waste production from household budget surveys

NASA Astrophysics Data System (ADS)

Wardrop, Nicola A.; Dzodzomenyo, Mawuli; Aryeetey, Genevieve; Hill, Allan G.; Bain, Robert E. S.; Wright, Jim

2017-08-01

Packaged water consumption is growing in low- and middle-income countries, but the magnitude of this phenomenon and its environmental consequences remain unclear. This study aims to quantify both the volumes of packaged water consumed relative to household water requirements and associated plastic waste generated for three West African case study countries. Data from household expenditure surveys for Ghana, Nigeria and Liberia were used to estimate the volumes of packaged water consumed and thereby quantify plastic waste generated in households with and without solid waste disposal facilities. In Ghana, Nigeria and Liberia respectively, 11.3 (95% confidence interval: 10.3-12.4), 10.1 (7.5-12.5), and 0.38 (0.31-0.45) Ml day-1 of sachet water were consumed. This generated over 28 000 tonnes yr-1 of plastic waste, of which 20%, 63% and 57% was among households lacking formal waste disposal facilities in Ghana, Nigeria and Liberia respectively. Reported packaged water consumption provided sufficient water to meet daily household drinking-water requirements for 8.4%, less than 1% and 1.6% of households in Ghana, Nigeria and Liberia respectively. These findings quantify packaged water’s contribution to household water needs in our study countries, particularly Ghana, but indicate significant subsequent environmental repercussions.

Consumer Education for High School Students. Trends and Issues Alerts.

ERIC Educational Resources Information Center

Kerka, Sandra

Surveys have established that high school students are highly deficient in knowledge regarding basic topics typically covered in consumer education classes, such as economics, personal finance, and consumer rights and responsibilities. The following are among the current trends that have underscored the need for secondary consumer education: the…

Computer-Based Resource Accounting Model for Generating Aggregate Resource Impacts of Alternative Automobile Technologies : Volume 1. Fleet Attributes Model

DOT National Transportation Integrated Search

1977-01-01

Auto production and operation consume energy, material, capital and labor resources. Numerous substitution possibilities exist within and between resource sectors, corresponding to the broad spectrum of potential design technologies. Alternative auto...

Space Situational Awareness using Market Based Agents

NASA Astrophysics Data System (ADS)

Sullivan, C.; Pier, E.; Gregory, S.; Bush, M.

2012-09-01

Space surveillance for the DoD is not limited to the Space Surveillance Network (SSN). Other DoD-owned assets have some existing capabilities for tasking but have no systematic way to work collaboratively with the SSN. These are run by diverse organizations including the Services, other defense and intelligence agencies and national laboratories. Beyond these organizations, academic and commercial entities have systems that possess SSA capability. Most all of these assets have some level of connectivity, security, and potential autonomy. Exploiting them in a mutually beneficial structure could provide a more comprehensive, efficient and cost effective solution for SSA. The collection of all potential assets, providers and consumers of SSA data comprises a market which is functionally illiquid. The development of a dynamic marketplace for SSA data could enable would-be providers the opportunity to sell data to SSA consumers for monetary or incentive based compensation. A well-conceived market architecture could drive down SSA data costs through increased supply and improve efficiency through increased competition. Oceanit will investigate market and market agent architectures, protocols, standards, and incentives toward producing high-volume/low-cost SSA.

Transfer of a three step mAb chromatography process from batch to continuous: Optimizing productivity to minimize consumable requirements.

PubMed

Gjoka, Xhorxhi; Gantier, Rene; Schofield, Mark

2017-01-20

The goal of this study was to adapt a batch mAb purification chromatography platform for continuous operation. The experiments and rationale used to convert from batch to continuous operation are described. Experimental data was used to design chromatography methods for continuous operation that would exceed the threshold for critical quality attributes and minimize the consumables required as compared to batch mode of operation. Four unit operations comprising of Protein A capture, viral inactivation, flow-through anion exchange (AEX), and mixed-mode cation exchange chromatography (MMCEX) were integrated across two Cadence BioSMB PD multi-column chromatography systems in order to process a 25L volume of harvested cell culture fluid (HCCF) in less than 12h. Transfer from batch to continuous resulted in an increase in productivity of the Protein A step from 13 to 50g/L/h and of the MMCEX step from 10 to 60g/L/h with no impact on the purification process performance in term of contaminant removal (4.5 log reduction of host cell proteins, 50% reduction in soluble product aggregates) and overall chromatography process yield of recovery (75%). The increase in productivity, combined with continuous operation, reduced the resin volume required for Protein A and MMCEX chromatography by more than 95% compared to batch. The volume of AEX membrane required for flow through operation was reduced by 74%. Moreover, the continuous process required 44% less buffer than an equivalent batch process. This significant reduction in consumables enables cost-effective, disposable, single-use manufacturing. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Feeding ecology of the lizard Tropidurus oreadicus Rodrigues 1987 (Tropiduridae) at Serra dos Carajás, Pará state, northern Brazil.

PubMed

Rocha, C F D; Siqueira, C C

2008-02-01

Tropidurus species commonly prey on arthropods, but they may also feed on vertebrates and plant material. The lizard Tropidurus oreadicus (Tropiduridae) is common in open vegetation habitats and generally has sexual dimorphism. In this study we analyzed the diet of T. oreadicus at Serra dos Carajás, Pará, in the north of Brazil. Snout-vent length (SVL) and jaw width (JW) were taken for 34 lizards. There was a significant difference in SVL and in JW, with males being larger than females. All lizards analyzed contained food in their stomachs. The diet of T. oreadicus at Serra dos Carajás was characterized by the consumption of a relative wide spectrum of food item categories (21 types of items), consisting of arthropods, part of one vertebrate and plant material, which characterizes the diet of a generalist predator. Volumetrically, the most important items in the diet of both sexes of T. oreadicus were flowers (M = 61.7%; F = 33%) and orthopterans (M = 1.7%; F = 3.5%). Ants were the most frequently consumed (100% for both sexes) and the most numerous (M = 94.5%; F = 89.4%) food item. Flowers also were frequently consumed (M = 91.7%; F = 54.5%), with their relative consumption differing significantly between sexes. There was not a significant sexual difference in prey volume, neither in number of preys per stomach, nor in type of prey ingested. There was no relationship between lizard jaw width and the mean volume of prey. The data showed that T. oreadicus is a relatively generalist lizard in terms of diet and that consumes large volumes of plant material, especially flowers of one species of genus Cassia.

Preventing gastric sieving by blending a solid/water meal enhances satiation in healthy humans.

PubMed

Marciani, Luca; Hall, Nicholas; Pritchard, Susan E; Cox, Eleanor F; Totman, John J; Lad, Mita; Hoad, Caroline L; Foster, Tim J; Gowland, Penny A; Spiller, Robin C

2012-07-01

Separation of solids and liquids within the stomach allows faster gastric emptying of liquids compared with solids, a phenomenon known as sieving. We tested the hypothesis that blending a solid and water meal would abolish sieving, preventing the early rapid decrease in gastric volume and thereby enhancing satiety. We carried out 2 separate studies. Study 1 was a 2-way, crossover, satiety study of 22 healthy volunteers who consumed roasted chicken and vegetables with a glass of water (1008 kJ) or the same blended to a soup. They completed satiety visual analogue scales at intervals for 3 h. Study 2 was a 2-way, crossover, mechanistic study of 18 volunteers who consumed the same meals and underwent an MRI to assess gastric emptying, gallbladder contraction, and small bowel water content (SBWC) at intervals for 3 h. In Study 1, the soup meal was associated with reduced hunger (P = 0.02). In Study 2, the volume of the gastric contents after the soup meal decreased more slowly than after the solid/liquid meal (P = 0.0003). The soup meal caused greater gallbladder contraction (P < 0.04). SBWC showed a biphasic response with an initial "gastric" phase during which SBWC was greater when the solid/liquid meal was consumed (P < 0.001) and a later "small bowel" phase when SBWC was greater when the soup meal was consumed (P < 0.01). Blending the solid/liquid meal to a soup delayed gastric emptying and increased the hormonal response to feeding, which may contribute to enhanced postprandial satiety.

Asiatic clam (Corbicula manilensis) and other foods used by waterfowl in the James River, Virginia

USGS Publications Warehouse

Perry, M.C.; Uhler, F.M.

1981-01-01

Corbicula manilensis was found in the gizzards of 24 ducks of 5 species taken from the James River, Virginia, between 1973 and 1976. Percent average volume in these species ranged from trace to 6%. This is the first known occurrence of this exotic clam in the food of duck in Chesapeake Bay. A total of 135 other food items was identified from the 116 gizzards of 9 species that were examined. Food that predominated included Cyperus spp., Leersia oryzoides, Polygonum spp., and Zea mays. The great diversity of food consumed in this fresh tidal section of the James River indicates the high value of these wetlands to waterfowl.

Exercise countermeasures for long-duration spaceflight: muscle- and intensity-specific considerations

NASA Astrophysics Data System (ADS)

Trappe, Todd

2012-07-01

On-orbit and ground-based microgravity simulation studies have provided a wealth of information regarding the efficacy of exercise countermeasures for protecting skeletal muscle and cardiovascular function during long-duration spaceflights. While it appears that exercise will be the central component to maintaining skeletal muscle and cardiovascular health of astronauts, the current exercise prescription is not completely effective and is time consuming. This lecture will focus on recent exercise physiology studies examining high intensity, low volume exercise in relation to muscle specific and cardiovascular health. These studies provide the basis of the next generation exercise prescription currently being implemented during long-duration space missions on the International Space Station.

Pseudolinear gradient ultrahigh-pressure liquid chromatography using an injection valve assembly.

PubMed

Xiang, Yanqiao; Liu, Yansheng; Stearns, Stanley D; Plistil, Alex; Brisbin, Martin P; Lee, Milton L

2006-02-01

The use of ultrahigh pressures in liquid chromatography (UHPLC) imposes stringent requirements on hardware such as pumps, valves, injectors, connecting tubing, and columns. One of the most difficult components of the UHPLC system to develop has been the sample injector. Static-split injection, which can be performed at pressures up to 6900 bar (100,000 psi), consumes a large sample volume and is very irreproducible. A pressure-balanced injection valve provided better reproducibility, shorter injection time, reduced sample consumption, and greater ease of use; however, it could only withstand pressures up to approximately 1000 bar (15,000 psi). In this study, a new injection valve assembly that can operate at pressures as high as 2070 bar (30,000 psi) was evaluated for UHPLC. This assembly contains six miniature electronically controlled needle valves to provide accurate and precise volumes for introduction into the capillary LC column. It was found that sample volumes as small as several tenths of a nanoliter can be injected, which are comparable to the results obtained from the static-split injector. The reproducibilities of retention time, efficiency, and peak area were investigated, and the results showed that the relative standard deviations of these parameters were small enough for quantitative analyses. Separation experiments using the UHPLC system with this new injection valve assembly showed that this new injector is suitable for both isocratic and gradient operation modes. A newly designed capillary connector was used at a pressure as high as 2070 bar (30,000 psi).

Importance of milk replacer intake and composition in rearing orphan foals

PubMed Central

Cymbaluk, Nadia F.; Smart, Marion E.; Bristol, Frank M.; Pouteaux, Victor A.

1993-01-01

Effects of milk replacer composition and intake on the growth of orphan foals were evaluated. Twenty foals were assigned to four treatments: 1) mare-nursed, 2) commercial foal milk replacer at recommended intakes (standard), 3) commercial foal milk replacer at high intakes (high), and 4) acidified replacer at recommended intakes (acidified). Foals fed milk replacer diets were weaned at 12-24 hours postpartum and fed milk replacer for 50 days. Mare-nursed foals were weaned between 52 and 56 days of age. Foals fed replacer diets gained 12% to 28% less weight than mare-nursed foals up to two weeks of age. However, by four months of age, weights of replacer-fed foals were similar to those of mare-nursed foals and 32 other mare-nursed foals at the farm weaned between three and four months postparium. Foals drank 10 to 12 L/100 kg body weight (BW) in fluid replacer daily over the trial period. During the first week, high intake foals consumed 26% more replacer (p<0.05) than foals fed acidified or standard diets. This higher intake resulted in diarrhea earlier (6-11 days vs 11-22 days) and for a longer time (6.3 days vs 2.5-3.6 days) than in foals fed recommended amounts. Mare-nursed foals developed “foal heat scours” in the second week postpartum. After the first week, foals fed high replacer diet voluntarily consumed the same volume of fluid replacer as foals fed the standard intake. Foals ate less than 1 kg grain mix/100 kg BW daily to one month of age, then increased intake to 1.5-2 kg/ 100 kg BW to weaning. Water intake was 20-40% of daily fluid intake and was correlated (r = 0.85) to dry matter intake. Foals in the high intake group ate less (p<0.05) solid feed and drank less water than foals fed the standard and acidified diets. The foal's stomach capacity appears to limit meal size and thus replacer intake. If recommended feeding intervals are used, replacer intakes by foals are less than 15% BW daily. High volume intakes appeared to prolong diarrhea. Normal growth rates occur when replacer and good-quality feeds are fed concurrently. PMID:17424268

A cross-sectional observation on habitual non-alcoholic beverage consumption among adolescents from four Irish post-primary schools.

PubMed

Millar, Sophie; O'Donoghue, Megan; McNulty, Breige; Kirwan, Laura; McKevitt, Aideen

2017-02-01

No up-to-date data on the dietary intake of Irish adolescents are available. The aim of the present pilot study was to obtain and compare cross-sectional information on habitual adolescent beverage consumption between four distinct post-primary schools in the Republic of Ireland, in 2014-2015. A cross-sectional observation study. A beverage consumption questionnaire was used to obtain data on beverage intake and influences on consumption. Four post-primary mixed-sex schools in Ireland representing the following school classifications were selected for the study: urban fee-paying, urban disadvantaged, rural fee-paying and rural disadvantaged. Students (n 761) aged 12-18 years. Data were analysed by Kruskal-Wallis (non-parametric) ANOVA to compare the distribution of beverage consumption across the schools. Water was the most highly consumed beverage among students from all four schools (median 1425 ml/d). Students from urban and rural disadvantaged schools reported a significantly higher volume of carbonated beverage intake than students from fee-paying schools. Students from an urban disadvantaged school also reported a significantly higher volume of carbonated beverage and energy drink intake compared with the other three schools. Students from an urban fee-paying school reported the highest consumption of water, while rural disadvantaged school students were the biggest consumers of tea and milk. Significant differences in beverage consumption (ml/d) were reported by adolescents from four schools in Ireland. Surveillance on current beverage consumption trends among adolescents is vital to guide policies and interventions, and for appropriate targeting of resources.

Crystal plasticity modeling of β phase deformation in Ti-6Al-4V

NASA Astrophysics Data System (ADS)

Moore, John A.; Barton, Nathan R.; Florando, Jeff; Mulay, Rupalee; Kumar, Mukul

2017-10-01

Ti-6Al-4V is an alloy of titanium that dominates titanium usage in applications ranging from mass-produced consumer goods to high-end aerospace parts. The material’s structure on a microscale is known to affect its mechanical properties but these effects are not fully understood. Specifically, this work will address the effects of low volume fraction intergranular β phase on Ti-6Al-4V’s mechanical response during the transition from elastic to plastic deformation. A crystal plasticity-based finite element model is used to fully resolve the deformation of the β phase for the first time. This high fidelity model captures mechanisms difficult to access via experiments or lower fidelity models. The results are used to assess lower fidelity modeling assumptions and identify phenomena that have ramifications for failure of the material.

Development of a High-Content Orthopoxvirus Infectivity and Neutralization Assays

PubMed Central

Gates, Irina; Olson, Victoria; Smith, Scott; Patel, Nishi; Damon, Inger; Karem, Kevin

2015-01-01

Currently, a number of assays measure Orthopoxvirus neutralization with serum from individuals, vaccinated against smallpox. In addition to the traditional plaque reduction neutralization test (PRNT), newer higher throughput assays are based on neutralization of recombinant vaccinia virus, expressing reporter genes such as β-galactosidase or green fluorescent protein. These methods could not be used to evaluate neutralization of variola virus, since genetic manipulations of this virus are prohibited by international agreements. Currently, PRNT is the assay of choice to measure neutralization of variola virus. However, PRNT assays are time consuming, labor intensive, and require considerable volume of serum sample for testing. Here, we describe the development of a high-throughput, cell-based imaging assay that can be used to measure neutralization, and characterize replication kinetics of various Orthopoxviruses, including variola, vaccinia, monkeypox, and cowpox. PMID:26426117

Influence of functionalized silicones on hair fiber-fiber interactions and on the relationship with the macroscopic behavior of hair assembly.

PubMed

Dussaud, Anne; Fieschi-Corso, Lara

2009-01-01

It is well established that silicones alter hair surface properties and that silicones have a significant impact on the macroscopic behavior of hair assembly, such as visual appearance, combing performance and manageability of the hair. In order to fine-tune the chemistry of functionlized silicones for specific consumer benefits and hair types, we investigated the influence of silicones on hair fiber-fiber interactions and their correlation to hair volume. The incline plane fiber loop method, implemented with a high-precision motorized rotary stage, was used to quantify the fiber-fiber interactions. Low load static friction was studied as a function of polymer molecular weight, dose and chemical architecture. This information was related to the macroscopic behavior of hair assembly, using virgin curly hair in high humidity.

An exploration of socio-economic and food characteristics of high trans fatty acid consumers in the Dutch and UK national surveys after voluntary product reformulation.

PubMed

Rippin, H L; Hutchinson, J; Ocke, M; Jewell, J; Breda, J J; Cade, J E

2017-01-01

Trans fatty acids (TFA) increase the risk of mortality and chronic diseases. TFA intakes have fallen since reformulation, but may still be high in certain, vulnerable, groups. This paper investigates socio-economic and food consumption characteristics of high TFA consumers after voluntary reformulation in the Netherlands and UK. Post-reformulation data of adults aged 19-64 was analysed in two national surveys: the Dutch National Food Consumption Survey (DNFCS) collected 2007-2010 using 2*24hr recalls (N = 1933) and the UK National Diet and Nutrition Survey (NDNS) years 3&4 collected 2010/11 and 2011/12 using 4-day food diaries (N = 848). The socio-economic and food consumption characteristics of the top 10% and remaining 90% TFA consumers were compared. Means of continuous data were compared using t-tests and categorical data means using chi-squared tests. Multivariate logistic regression models indicated which socio-demographic variables were associated with high TFA consumption. In the Dutch analyses, women and those born outside the Netherlands were more likely to be top 10% TFA consumers than men and Dutch-born. In the UK unadjusted analyses there was no significant trend in socio-economic characteristics between high and lower TFA consumers, but there were regional differences in the multivariate logistic regression analyses. In the Netherlands, high TFA consumers were more likely to be consumers of cakes, buns & pastries; cream; and fried potato than the remaining 90%. Whereas in the UK, high TFA consumers were more likely to be consumers of lamb; cheese; and dairy desserts and lower crisps and savoury snack consumers. Some socio-demographic differences between high and lower TFA consumers were evident post-reformulation. High TFA consumers in the Dutch 2007-10 survey appeared more likely to obtain TFA from artificial sources than those in the UK survey. Further analyses using more up-to-date food composition databases may be needed.

Defense AT&L (Volume 37, Number 3, May-June 2008)

DTIC Science & Technology

2008-06-01

which needs spectrum for consumer products such as cell phones and Blackberry ® devices. Q. Speaking of spectrum, the Defense Spectrum Organization...Modernism is arrogant, risk-averse, and ill-suited to a dynamic environment. Its tunnel vision inappropriately disregards inconvenient data and

Rewiring food systems to enhance human health and biosphere stewardship

NASA Astrophysics Data System (ADS)

Gordon, Line J.; Bignet, Victoria; Crona, Beatrice; Henriksson, Patrik J. G.; Van Holt, Tracy; Jonell, Malin; Lindahl, Therese; Troell, Max; Barthel, Stephan; Deutsch, Lisa; Folke, Carl; Jamila Haider, L.; Rockström, Johan; Queiroz, Cibele

2017-10-01

Food lies at the heart of both health and sustainability challenges. We use a social-ecological framework to illustrate how major changes to the volume, nutrition and safety of food systems between 1961 and today impact health and sustainability. These changes have almost halved undernutrition while doubling the proportion who are overweight. They have also resulted in reduced resilience of the biosphere, pushing four out of six analysed planetary boundaries across the safe operating space of the biosphere. Our analysis further illustrates that consumers and producers have become more distant from one another, with substantial power consolidated within a small group of key actors. Solutions include a shift from a volume-focused production system to focus on quality, nutrition, resource use efficiency, and reduced antimicrobial use. To achieve this, we need to rewire food systems in ways that enhance transparency between producers and consumers, mobilize key actors to become biosphere stewards, and re-connect people to the biosphere.

Artificial muscles driven by the cooperative actuation of electrochemical molecular machines. Persistent discrepancies and challenges

NASA Astrophysics Data System (ADS)

Otero

2017-10-01

Here we review the persisting conceptual discrepancies between different research groups working on artificial muscles based on conducting polymers and other electroactive material. The basic question is if they can be treated as traditional electro-mechanical (physical) actuators driven by electric fields and described by some adaptation of their physical models or if, replicating natural muscles, they are electro-chemo-mechanical actuators driven by electrochemical reaction of the constitutive molecular machines: the polymeric chains. In that case the charge consumed by the reaction will control the volume variation of the muscular material and the motor displacement, following the basic and single Faraday's laws: the charge consumed by the reaction determines the number of exchanged ions and solvent, the film volume variation to lodge/expel them and the amplitude of the movement. Deviations from the linear relationships are due to the osmotic exchange of solvent and to the presence of parallel reactions from the electrolyte, which originate creeping effects. Challenges and limitations are underlined.

Speech Volume Indexes Sex Differences in the Social-Emotional Effects of Alcohol

PubMed Central

Fairbairn, Catharine E.; Sayette, Michael A.; Amole, Marlissa C.; Dimoff, John D.; Cohn, Jeffrey F.; Girard, Jeffrey M.

2015-01-01

Men and women differ dramatically in their rates of alcohol use disorder (AUD), and researchers have long been interested in identifying mechanisms underlying male vulnerability to problem drinking. Surveys suggest that social processes underlie sex differences in drinking patterns, with men reporting greater social enhancement from alcohol than women, and all-male social drinking contexts being associated with particularly high rates of hazardous drinking. But experimental evidence for sex differences in social-emotional response to alcohol has heretofore been lacking. Research using larger sample sizes, a social context, and more sensitive measures of alcohol’s rewarding effects may be necessary to better understand sex differences in the etiology of AUD. This study explored the acute effects of alcohol during social exchange on speech volume –an objective measure of social-emotional experience that was reliably captured at the group level. Social drinkers (360 male; 360 female) consumed alcohol (.82g/kg males; .74g/kg females), placebo, or a no-alcohol control beverage in groups of three over 36-minutes. Within each of the three beverage conditions, equal numbers of groups consisted of all males, all females, 2 females and 1 male, and 1 female and 2 males. Speech volume was monitored continuously throughout the drink period, and group volume emerged as a robust correlate of self-report and facial indexes of social reward. Notably, alcohol-related increases in group volume were observed selectively in all-male groups but not in groups containing any females. Results point to social enhancement as a promising direction for research exploring factors underlying sex differences in problem drinking. PMID:26237323

Association of Attorney Advertising and FDA Action with Prescription Claims: A Time Series Segmented Regression Analysis.

PubMed

Tippett, Elizabeth C; Chen, Brian K

2015-12-01

Attorneys sponsor television advertisements that include repeated warnings about adverse drug events to solicit consumers for lawsuits against drug manufacturers. The relationship between such advertising, safety actions by the US Food and Drug Administration (FDA), and healthcare use is unknown. To investigate the relationship between attorney advertising, FDA actions, and prescription drug claims. The study examined total users per month and prescription rates for seven drugs with substantial attorney advertising volume and FDA or other safety interventions during 2009. Segmented regression analysis was used to detect pre-intervention trends, post-intervention level changes, and changes in post-intervention trends relative to the pre-intervention trends in the use of these seven drugs, using advertising volume, media hits, and the number of Medicare enrollees as covariates. Data for these variables were obtained from the Center for Medicare and Medicaid Services, Kantar Media, and LexisNexis. Several types of safety actions were associated with reductions in drug users and/or prescription rates, particularly for fentanyl, varenicline, and paroxetine. In most cases, attorney advertising volume rose in conjunction with major safety actions. Attorney advertising volume was positively correlated with prescription rates in five of seven drugs, likely because advertising volume began rising before safety actions, when prescription rates were still increasing. On the other hand, attorney advertising had mixed associations with the number of users per month. Regulatory and safety actions likely reduced the number of users and/or prescription rates for some drugs. Attorneys may have strategically chosen to begin advertising adverse drug events prior to major safety actions, but we found little evidence that attorney advertising reduced drug use. Further research is needed to better understand how consumers and physicians respond to attorney advertising.

Gastric volume rather than nutrient content inhibits food intake.

PubMed

Phillips, R J; Powley, T L

1996-09-01

To evaluate the separate contributions of distension and nutrient stimulation of the stomach to the inhibition of short-term food intake and, particularly, to reassess previous analyses based on the inflatable gastrointestinal cuff, four experiments were performed. Rats equipped with pyloric cuffs and indwelling gastric catheters consumed a liquid diet ad libitum. Their consumption during short-term (30 min) feeding bout was measured after gastric infusions on cuff-open and cuff-closed trials. Animals taking meals (approximately 5 ml) with cuffs closed immediately after receiving intragastric infusions of 2.5, 5, 7.5, or 10 ml of normal saline exhibited both suppression at the smallest infusion and a dose-dependent reduction across the other volumes (experiment 1). Additionally, when the test diet concentration was varied, animals with their cuffs closed consumed a constant volume, not a constant number of calories (experiment 2). Furthermore, cuff-closed animals exhibited no more suppression to 5-ml intragastric infusions of nutrients (including, on different trials, 50 and 100% Isocal diet; 10, 20, and 40% glucose; and 40% sucrose and 40% fructose) than to the same volume of saline (experiments 3 and 4). In contrast, on cuff-open trials in which gastric contents could empty into the duodenum, these same nutrient loads were more effective (except fructose) than saline in producing suppression of food intake. In summary, although both limited gastric distension with the pylorus occluded and intestinal nutrient stimulation with the cuff open effectively reduced intake, cuff-closed gastric loads of mixed macronutrients or carbohydrate solutions of 2-8 kcal, pH from 5.8 to 6.7, and osmolarities between 117 and 2,294 mosM/kg produced only the distension-based suppression generated by the same volume of saline.

Rapid Consumption of Low Concentrations of Methyl Bromide by Soil Bacteria

PubMed Central

Hines, Mark E.; Crill, Patrick M.; Varner, Ruth K.; Talbot, Robert W.; Shorter, Joanne H.; Kolb, Charles E.; Harriss, Robert C.

1998-01-01

A dynamic dilution system for producing low mixing ratios of methyl bromide (MeBr) and a sensitive analytical technique were used to study the uptake of MeBr by various soils. MeBr was removed within minutes from vials incubated with soils and ∼10 parts per billion by volume of MeBr. Killed controls did not consume MeBr, and a mixture of the broad-spectrum antibiotics chloramphenicol and tetracycline inhibited MeBr uptake by 98%, indicating that all of the uptake of MeBr was biological and by bacteria. Temperature optima for MeBr uptake suggested a biological sink, yet soil moisture and temperature optima varied for different soils, implying that MeBr consumption activity by soil bacteria is diverse. The eucaryotic antibiotic cycloheximide had no effect on MeBr uptake, indicating that soil fungi were not involved in MeBr removal. MeBr consumption did not occur anaerobically. A dynamic flowthrough vial system was used to incubate soils at MeBr mixing ratios as low as those found in the remote atmosphere (5 to 15 parts per trillion by volume [pptv]). Soils consumed MeBr at all mixing ratios tested. Temperate forest and grassy lawn soils consumed MeBr most rapidly (rate constant [k] = 0.5 min−1), yet sandy temperate, boreal, and tropical forest soils also readily consumed MeBr. Amendments of CH4 up to 5% had no effect on MeBr uptake even at CH4:MeBr ratios of 107, and depth profiles of MeBr and CH4 consumption exhibited very different vertical rate optima, suggesting that methanotrophic bacteria, like those presently in culture, do not utilize MeBr when it is at atmospheric mixing ratios. Data acquired with gas flux chambers in the field demonstrated the very rapid in situ consumption of MeBr by soils. Uptake of MeBr at mixing ratios found in the remote atmosphere occurs via aerobic bacterial activity, displays first-order kinetics at mixing ratios from 5 pptv to ∼1 part per million per volume, and is rapid enough to account for 25% of the global annual loss of atmospheric MeBr. PMID:9572964

Kentucky Consumer & Homemaking Education. Management-Consumer Education. Curriculum Guide, Comprehensive Courses.

ERIC Educational Resources Information Center

Waldrop, Suzanne H.

Intended for use by teachers on the junior high and high school levels, this curriculum guide, which is one in a series of guides for consumer and homemaking education in Kentucky, outlines three courses in the area of management-consumer education. The junior high unit acquaints the student with the concepts of decision making and assessing…

Food of young-of-the-year lake trout (Salvelinus namaycush) in Presque Isle Harbor, Lake Superior

USGS Publications Warehouse

Swedberg, Donald V.; Peck, James W.

1984-01-01

The food habits of young lake trout (Salvelinus namaycush) were studied by examining the digestive tracts of 293 young-of-the-year collected in Presque Isle Harbor, Lake Superior. Lake trout in the 25 to 27-mm length range started to eat food organisms before all of their yolk material was absorbed. Organisms consumed by the 25 to 27-mm young-of-the-year included Chironomidae, Copepoda (Harpacticoida, Calanoida, Cyclopoida), and Cladocerea (Daphnia spp., Bosmina sp., Chydorus sp.). Chironomid pupae and chironomid larvae accounted for 74% and 5%, respectively, of the total volume of food eaten by the young lake trout in Presque Isle Harbor. Although copepods, cladocerans, and mysids were present in many stomachs, their contribution to the total volume of food was only 15%. Some lake trout in the 32 to 54-mm length range had consumed fry of sculpin (Cottus spp.) or rainbow smelt (Osmerus mordax), but the overall contribution of fish fry to the total volume of food was only 4% (frequency of occurrence, 10%). The lake trout in Presque Isle Harbor fed heavily on planktonic organisms, sparingly on benthic organisms, and were opportunistic feeders that appeared to prey on whatever forage organisms were available in the shallow nearshore waters.

Socio-economic patterning of tobacco use in Indian states

PubMed Central

Karan, A.; Selvaraj, S.; Bhan, N.; Subramanian, S. V.; Millett, C.

2013-01-01

BACKGROUND: Studies in India have identified marked variations in overall tobacco use between socio-economic groups. We examined whether associations between socio-economic status (SES) and tobacco use varied across individual Indian states by tobacco type. METHODS: Cross-sectional survey of 100 855 households in 24 Indian states and Union Territories conducted in 2009–2010. Outcome measures were household tobacco consumption by type. Logistic and linear regression models were used to examine associations at the household level between education, income and use and volume of tobacco consumed. RESULTS: Overall, 52% of households used any form of tobacco product; the predominant form was smokeless tobacco (22%), followed by bidi (17%) and cigarettes (4%). Increasing household income and higher education level were associated with a higher likelihood of cigarette use but a lower likelihood of bidi and smokeless tobacco use in some Indian states. Increasing household income was associated with higher volumes of cigarette and bidi use among consuming households; however, association between educational level and volume of tobacco consumption was inconsistent. CONCLUSION: SES has a varying impact on different types of tobacco use in Indian states. Policy makers should consider socio-economic patterning of tobacco use when designing, implementing and evaluating tobacco control interventions in different states of India. PMID:23827038

More of the same is not enough.

PubMed

Willison, Donald J

2002-01-01

Growth in pharmaceutical expenditures in Canada is approximately double the rate of growth in other healthcare expenditures. Conventional approaches to controlling expenditures are not working. The policy options proposed by Laupacis, Anderson and O'Brien for managing pharmaceutical budgets--better evidence, better dissemination, additional regulation and increased dialogue--are necessary but not sufficient to bring about more cost-effective prescribing. This paper suggests three additional strategies that will complement existing policies: restructuring consumer co-payments such that consumer cost-sharing varies inversely with therapeutic necessity; introducing physician budgets for those pharmaceuticals for which there is reasonable suspicion of overuse; and price-volume contracting with pharmaceutical firms, consistent with evidence from pharmaco-economic evaluation. The first strategy will send better signals to the consumer as to the value of the pharmaceuticals they are consuming. The latter two strategies will provide incentives for physicians to prescribe and industry to market their pharmaceuticals in a fashion more consistent with cost-effective use of these drugs. Better evidence and better dissemination are simply not enough.

Sustainable sheep production and consumer preference trends: compatibilities, contradictions, and unresolved dilemmas.

PubMed

Montossi, F; Font-i-Furnols, M; del Campo, M; San Julián, R; Brito, G; Sañudo, C

2013-12-01

There are increasing concerns of society towards the consumption of animal products which have been produced and transformed in a sustainable manner. This trend influences consumer purchasing decision making, particularly in developed countries. On the other hand, in the next years, the pressure to increase the volume and efficiency of meat production will be much higher to cope with the expected unsatisfied demand. At least in part, current and future technologies could contribute to solve this challenge. However, the use of some of these innovations could have a negative effect on consumer preferences. There is no consensus in our society about this dilemma. The objective of this paper is to review the scientific evidence related to these topics and to analyze and discuss the effect of some of the extrinsic and intrinsic factors linked with the sheep industry which could affect the acceptability of lamb meat by consumers. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

Orbital Spacecraft Consumables Resupply System (OSCRS). Volume 3: Program Cost Estimate

NASA Technical Reports Server (NTRS)

Perry, D. L.

1986-01-01

A cost analysis for the design, development, qualification, and production of the monopropellant and bipropellant Orbital Spacecraft Consumable Resupply System (OSCRS) tankers, their associated avionics located in the Orbiter payload bay, and the unique ground support equipment (GSE) and airborne support equipment (ASE) required to support operations is presented. Monopropellant resupply for the Gamma Ray Observatory (GRO) in calendar year 1991 is the first defined resupply mission with bipropellant resupply missions expected in the early to mid 1990's. The monopropellant program estimate also includes contractor costs associated with operations support through the first GRO resupply mission.

Novel method for high-throughput colony PCR screening in nanoliter-reactors

PubMed Central

Walser, Marcel; Pellaux, Rene; Meyer, Andreas; Bechtold, Matthias; Vanderschuren, Herve; Reinhardt, Richard; Magyar, Joseph; Panke, Sven; Held, Martin

2009-01-01

We introduce a technology for the rapid identification and sequencing of conserved DNA elements employing a novel suspension array based on nanoliter (nl)-reactors made from alginate. The reactors have a volume of 35 nl and serve as reaction compartments during monoseptic growth of microbial library clones, colony lysis, thermocycling and screening for sequence motifs via semi-quantitative fluorescence analyses. nl-Reactors were kept in suspension during all high-throughput steps which allowed performing the protocol in a highly space-effective fashion and at negligible expenses of consumables and reagents. As a first application, 11 high-quality microsatellites for polymorphism studies in cassava were isolated and sequenced out of a library of 20 000 clones in 2 days. The technology is widely scalable and we envision that throughputs for nl-reactor based screenings can be increased up to 100 000 and more samples per day thereby efficiently complementing protocols based on established deep-sequencing technologies. PMID:19282448

Influence of a Pre-Exercise Glycerol Hydration Beverage on Performance and Physiologic Function During Mountain-Bike Races in the Heat

PubMed Central

Wingo, Jonathan E.; Berger, Erik M.; Dellis, William O.; Knight, J. Chad; McClung, Joseph M.

2004-01-01

Objective: To determine if pre-exercise hydration with and without glycerol differentially affects physiologic and performance responses during mountain-bike races in the heat. Design and Setting: Testing (random, crossover, double-blind design) included the following 3 treatments administered in conjunction with a 30-mile mountain-bike race consisting of three 10-mile (16-km) loops: (1) no water during exercise (NE): water consumed before the race and no water consumed during the race, (2) glycerol (G): mixture of water and glycerol consumed before the race and water via 2 water bottles consumed during the race, and (3) water (W): water consumed before the race and water via 2 water bottles consumed during the race. Subjects stopped for 8 minutes after each 10-mile loop for collection of data. Subjects: Twelve heat-acclimated male mountain bikers with age = 24.5 ± 1.1 years, percentage of body fat = 14.3 ± 1.0%, mass = 76.9 ± 1.9 kg, height = 179 ± 2 cm. Measurements: We measured body weight, percentage of body fat, rectal temperature, blood lactate, blood glucose, urine volume, urine color, urine specific gravity, thirst sensation, thermal sensation, rating of perceived exertion, fluid consumption, heart rate, and sweat rate. Each subject completed the Environmental Symptoms Questionnaire. Results: The G trial was less dehydrated than the NE and W trials postexercise. Pre-exercise urine volume was less in the G trial than in the NE and W trials, and postexercise thirst was less in the G trial than the NE and W trials. Postexercise Environmental Symptoms Questionnaire scores were lower in the G trial than the NE or W trials. It is noteworthy that, although not significant, the G trial performed 5 minutes faster on loop 3 than the NE and W trials. Conclusions: Lower Environmental Symptoms Questionnaire scores and percentage of dehydration may indicate decreased signs and symptoms of heat strain in the G trial. Based on the NE trial performance, adequate pre-exercise hydration, even without glycerol, may limit the detrimental effects of dehydration. PMID:15173869

Identifying Structure-Property Relationships Through DREAM.3D Representative Volume Elements and DAMASK Crystal Plasticity Simulations: An Integrated Computational Materials Engineering Approach

NASA Astrophysics Data System (ADS)

Diehl, Martin; Groeber, Michael; Haase, Christian; Molodov, Dmitri A.; Roters, Franz; Raabe, Dierk

2017-05-01

Predicting, understanding, and controlling the mechanical behavior is the most important task when designing structural materials. Modern alloy systems—in which multiple deformation mechanisms, phases, and defects are introduced to overcome the inverse strength-ductility relationship—give raise to multiple possibilities for modifying the deformation behavior, rendering traditional, exclusively experimentally-based alloy development workflows inappropriate. For fast and efficient alloy design, it is therefore desirable to predict the mechanical performance of candidate alloys by simulation studies to replace time- and resource-consuming mechanical tests. Simulation tools suitable for this task need to correctly predict the mechanical behavior in dependence of alloy composition, microstructure, texture, phase fractions, and processing history. Here, an integrated computational materials engineering approach based on the open source software packages DREAM.3D and DAMASK (Düsseldorf Advanced Materials Simulation Kit) that enables such virtual material development is presented. More specific, our approach consists of the following three steps: (1) acquire statistical quantities that describe a microstructure, (2) build a representative volume element based on these quantities employing DREAM.3D, and (3) evaluate the representative volume using a predictive crystal plasticity material model provided by DAMASK. Exemplarily, these steps are here conducted for a high-manganese steel.

Functional characterization of steam jet-cooked buckwheat flour as a fat replacer in cake-baking.

PubMed

Min, Bockki; Lee, Seung Mi; Yoo, Sang-Ho; Inglett, George E; Lee, Suyong

2010-10-01

With rising consumer awareness of obesity, the food industry has a market-driven impetus to develop low-fat or fat-free foods with acceptable taste and texture. Fancy buckwheat flour was thus subjected to steam jet-cooking and the performance of the resulting product in cake-baking was evaluated as a fat replacer. Steam jet-cooking caused structural breakdown and starch gelatinization of buckwheat flour, thus increasing its water hydration properties. In the pasting measurements, steam jet-cooked buckwheat flour exhibited high initial viscosity, while no peak viscosity was observed. Also, the suspensions of steam jet-cooked buckwheat flour exhibited shear-thinning behaviors, which were well characterized by the power law model. When shortening in cakes was replaced with steam jet-cooked buckwheat gels, the specific gravity of cake batters significantly increased, consequently affecting cake volume after baking. However, shortening replacement with steam jet-cooked buckwheat up to 20% by weight appeared to be effective in producing cakes as soft as the control without volume loss. When buckwheat flour was thermomechanically modified by steam jet-cooking, it was successfully incorporated into cake formulations for shortening up to 20% by weight, producing low-fat cakes with comparable volume and textural properties to the control. Copyright © 2010 Society of Chemical Industry.

Assessments of direct human exposure: the approach of EU risk assessments compared to scenario-based risk assessment.

PubMed

Wormuth, Matthias; Demou, Evangelia; Scheringer, Martin; Hungerbühler, Konrad

2007-08-01

The awareness of potential risks emerging from the use of chemicals in all parts of daily life has increased the need for risk assessments that are able to cover a high number of exposure situations and thereby ensure the safety of workers and consumers. In the European Union (EU), the practice of risk assessments for chemicals is laid down in a Technical Guidance Document; it is designed to consider environmental and human occupational and residential exposure. Almost 70 EU risk assessment reports (RARs) have been finalized for high-production-volume chemicals during the last decade. In the present study, we analyze the assessment of occupational and consumer exposure to trichloroethylene and phthalates presented in six EU RARs. Exposure scenarios in these six RARs were compared to scenarios used in applications of the scenario-based risk assessment approach to the same set of chemicals. We find that scenarios used in the selected EU RARs to represent typical exposure situations in occupational or private use of chemicals and products do not necessarily represent worst-case conditions. This can be due to the use of outdated information on technical equipment and conditions in workplaces or omission of pathways that can cause consumer exposure. Considering the need for exposure and risk assessments under the new chemicals legislation of the EU, we suggest that a transparent process of collecting data on exposure situations and of generating representative exposure scenarios is implemented to improve the accuracy of risk assessments. Also, the data sets used to assess human exposure should be harmonized, summarized in a transparent fashion, and made accessible for all risk assessors and the public.

Red vertical cavity surface emitting lasers (VCSELs) for consumer applications

NASA Astrophysics Data System (ADS)

Duggan, Geoffrey; Barrow, David A.; Calvert, Tim; Maute, Markus; Hung, Vincent; McGarvey, Brian; Lambkin, John D.; Wipiejewski, Torsten

2008-02-01

There are many potential applications of visible, red (650nm - 690nm) vertical cavity surface emitting lasers (VCSELs) including high speed (Gb) communications using plastic optical fiber (POF), laser mouse sensors, metrology, position sensing. Uncertainty regarding the reliability of red VCSELs has long been perceived as the most significant roadblock to their commercialization. In this paper we will present data on red VCSELs optimized for performance and reliability that will allow exploitation of this class of VCSEL in a wide range of high volume consumer, communication and medical applications. VCSELs operating at ~665nm have been fabricated on 4" GaAs substrates using MOCVD as the growth process and using standard VCSEL processing technology. The active region is AlGaInP-based and the DBR mirrors are made from AlGaAs. Threshold currents are typically less than 2mA, the devices operate up to >60C and the light output is polarized in a stable, linear characteristic over all normal operating conditions. The 3dB modulation bandwidth of the devices is in excess of 3GHz and we have demonstrated the operation of a transceiver module operating at 1.25Gb/s over both SI-POF and GI-POF. Ageing experiments carried out using a matrix of current and temperature stress conditions allows us to estimate that the time to failure of 1% of devices (TT1%F) is over 200,000h for reasonable use conditions - making these red VCSELs ready for commercial exploitation in a variety of consumer-type applications. Experiments using appropriate pulsed driving conditions have resulted in operation of 665nm VCSELs at a temperature of 85°C whilst still offering powers useable for eye-safe free space and POF communications.

Popcorn: An Explosive Mixture of General Mathematics.

ERIC Educational Resources Information Center

Westerberg, Judy; Whiting, Jack

1992-01-01

Presents an activity developed for back-to-back general science and mathematics classes involving measurement, data analysis, and consumer mathematics. Students compare brands of popcorn for number of popped and unpopped kernels, volume, size, color, texture, and flavor, and develop advertisements for the best brands. Suggests possible extension…

40 CFR 98.334 - Monitoring and QA/QC requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... used for accounting purposes including direct measurement weighing or through the use of purchase records same plant instruments or procedures that are used for accounting purposes (such as weigh hoppers... density and volume measurements, etc.). Record the total mass for the materials consumed each calendar...

The effect of increased consumer demand on fees for aesthetic surgery: an economic analysis.

PubMed

Krieger, L M; Shaw, W W

1999-12-01

Economic theory dictates that changes in consumer demand have predictable effects on prices. Demographics represents an important component of demand for aesthetic surgery. Between the years of 1997 and 2010, the U.S. population is projected to increase by 12 percent. The population increase will be skewed such that those groups undergoing the most aesthetic surgery will see the largest increase. Accounting for the age-specific frequencies of aesthetic surgery and the population increase yields an estimate that the overall market for aesthetic surgery will increase by 19 percent. Barring unforeseen changes in general economic conditions or consumer tastes, demand should increase by an analogous amount. An economic demonstration shows the effects of increasing demand for aesthetic surgery on its fees. Between the years of 1992 and 1997, there was an increase in demand for breast augmentation as fears of associated autoimmune disorders subsided. Similarly, there was increased male acceptance of aesthetic surgery. The number of breast augmentations and procedures to treat male pattern baldness, plastic surgeons, and fees for the procedures were tracked. During the study period, the supply of surgeons and consumer demand increased for both of these procedures. Volume of breast augmentation increased by 275 percent, whereas real fees remained stable. Volume of treatment for male pattern baldness increased by 107 percent, and the fees increased by 29 percent. Ordinarily, an increase in supply leads to a decrease in prices. This did not occur during the study period. Economic analysis demonstrates that the increased supply of surgeons performing breast augmentation was offset by increased consumer demand for the procedure. For this reason, fees were not lowered. Similarly, increased demand for treatment of male pattern baldness more than offset the increased supply of surgeons performing it. The result was higher fees. Emphasis should be placed on using these economic relationships to expand the demand for aesthetic surgery.

Next-Generation Performance-Based Regulation. Volume 1: Introduction - Global Lessons for Success; Volume 2: Primer - Essential Elements of Design and Implementation; Volume 3: Innovative Examples from Around the World

DOE Office of Scientific and Technical Information (OSTI.GOV)

Logan, Jeffrey S

Performance-based regulations (PBRs) provide a regulatory framework to connect goals, targets, and measures to utility performance or executive compensation. Well-designed PBRs provide incentives for utility performance, benefiting consumers and utility owners alike. This report considers the role of both PBRs and more discrete performance incentive mechanisms (PIMs) in 21st century power sector transformation. Innovative technologies are transforming the way electricity is generated, delivered, and consumed. PBRs have the potential to realign utility, investor, and consumer incentives and mitigate emerging challenges to the utility business model, renewable integration, and even cyber security.The goals of PBRs in the form of multi-year ratemore » plans are in many respects the same in terms of providing reasonably priced and reliable service to customers. However, today's technologies have changed, and there is more emphasis on clean energy. Thus, the pathways and the potential outcomes are different than they were in the 20th century when centralized generator stations and large infrastructure additions dominated the utility landscape. Given unprecedented changes underway in the electricity sector, PBRs - by specifying expectations of utility performance and outcomes for consumers, while staying agnostic to the exact means of delivery - constitute a form of prescient regulation that harnesses disruption. PBRs are one tool in a broader toolbox in the transition toward flexible regulatory and market structures that rewards utilities that adapt or evolve in reaction to market and technology change. PBRs and PIMs have great value for the electric industry when designed well and can be applied to many different situations. How exactly PBR mechanisms are most effectively enacted will vary based on the utility ownership model, institutional arrangements, and a variety of other local factors. PBRs should be tailored to the needs and goals of each jurisdiction, and perhaps each utility, to most effectively achieve the needs of a 21st century power grid in that jurisdiction. Presented in three volumes, this report highlights the lessons learned from their evolving history, explores essential elements of their design and implementation as well as considerations for how they may be best applied, and examines leading examples of PBRs from the United Kingdom, New York, Denmark, Mexico, and South Africa. The full report, 'Next-Generation Performance Based Regulation - Emphasizing Utility Performance to Unleash Power Sector Innovation,' published in September 2017, can be accessed at https://www.nrel.gov/docs/fy17osti/68512.pdf.« less

Journal of Air Transportation, Volume 9, No. 1. Volume 9, No. 1

NASA Technical Reports Server (NTRS)

Bowen, Brent D. (Editor)

2004-01-01

The articles in this issue include: 1) Are Four Year Universities Better than Two-Year Colleges at Preparing Students to Pass the FAA Aircraft Mechanic Certification Written Examinations? 2) Assessing Perceived Risk of Consumers in Internet Airline Reservations Services; 3) Perceptions of Communication Training Among Collegiate Flight Educators; 4) Ethics Education in University Aviation Management Programs in the U.S.: Part Three - Qualitative Analysis and Recommendations; 5) Airline Flight Operations Internships Perspectives; 6) Applying Data Mining Techniques to Forecast Number of Airline Passengers in Saudi Arabia (Domestic and International Travels).

The METAL System. Volume I and Volume II. Appendices.

DTIC Science & Technology

1981-01-01

demands , and fair CPU time were measured. The fair measure reported here includes the pure CPU time plus a pro-rated portion of the time consumed by the...syntactic class or the form matched . NO = noun VB = verb OTR = other part of speech IT-12 Although the above feature is not used by the system at present...indicate the syntactic class of the form matched . NO = noun other than gerund ("content", "dark", "African") INF = infinitive ("direct", "equal", "content

The Left Atrio-Vertebral Ratio: a new simple means for assessing left atrial enlargement on Computed Tomography.

PubMed

Montillet, Marie; Baqué-Juston, Marie; Tasu, Jean-Pierre; Bertrand, Sandra; Berthier, Frédéric; Zarqane, Naïma; Brunner, Philippe

2018-03-01

The purpose of this study is to describe a new method to quickly estimate left atrial enlargement (LAE) on Computed Tomography. Left atrial (LA) volume was assessed with a 3D-threshold Hounsfield unit detection technique, including left atrial appendage and excluding pulmonary venous confluence, in 201 patients with ECG-gated 128-slice dual-source CT and indexed to body surface area. LA and vertebral axial diameter and area were measured at the bottom level of the right inferior pulmonary vein ostium. Ratio of LA diameter and surface on vertebra (LAVD and LAVA) were compared to LA volume. In accordance with the literature, a cutoff value of 78 ml/m 2 was chosen for maximal normal LA volume. 18% of LA was enlarged. The best cutoff values for LAE assessment were 2.5 for LAVD (AUC: 0.65; 95% CI: 0.58-0.73; sensitivity: 57%; specificity: 71%), and 3 for LAVA (AUC: 0.78; 95% CI: 0.72-0.84; sensitivity: 67%; specificity: 79%), with higher accuracy for LAVA (P=0.015). Inter-observer and intra-observer variability were either good or excellent for LAVD and LAVA (respective intraclass coefficients: 0.792 and 0.910; 0.912 and 0.937). A left atrium area superior to three times the vertebral area indicates LAE with high specificity. • Left atrial enlargement is a frequent condition associated with poor cardiac outcome. • Left atrial enlargement is highly time-consuming to diagnose on CT. • The left atrio-vertebral ratio quickly assesses left atrial enlargement. • A left atrial area > three times vertebral area is highly specific.

Real-time measurement of renal blood flow in healthy subjects using contrast-enhanced ultrasound.

PubMed

Kalantarinia, Kambiz; Belcik, J Todd; Patrie, James T; Wei, Kevin

2009-10-01

Current methods for measuring renal blood flow (RBF) are time consuming and not widely available. Contrast-enhanced ultrasound (CEU) is a safe and noninvasive imaging technique suitable for assessment of tissue blood flow, which has been used clinically to assess myocardial blood flow. We tested the utility of CEU in monitoring changes in RBF in healthy volunteers. We utilized CEU to monitor the expected increase in RBF following a high protein meal in healthy adults. Renal cortical perfusion was assessed by CEU using low mechanical index (MI) power modulation Angio during continuous infusions of Definity. Following destruction of tissue microbubbles using ultrasound at a MI of 1.0, the rate of tissue replenishment with microbubbles and the plateau acoustic intensity (AI) were used to estimate the RBF velocity and cortical blood volume, respectively. Healthy adults (n = 19, mean age 26.6 yr) were enrolled. The A.beta parameter of CEU, representing mean RBF increased by 42.8%from a baseline of 17.05 +/- 6.23 to 23.60 +/- 6.76 dB/s 2 h after the ingestion of the high-protein meal (P = 0.002). Similarly, there was a 37.3%increase in the beta parameter, representing the geometric mean of blood velocity after the high protein meal (P < 0.001). The change in cortical blood volume was not significant (P = 0.89). Infusion time of Definity was 6.3 +/- 2.0 min. The ultrasound contrast agent was tolerated well with no serious adverse events. CEU is a fast, noninvasive, and practical imaging technique that may be useful for monitoring renal blood velocity, volume, and flow.

Mini and micro spectrometers pave the way to on-field advanced analytics

NASA Astrophysics Data System (ADS)

Bouyé, Clémentine; Kolb, Hugo; d'Humières, Benoît.

2016-03-01

First introduced in the 1990's, miniature optical spectrometers were compact, portable devices brought on the market by the desire to move from time-consuming lab-based analyses to on-field and in situ measurements. This goal of getting spectroscopy into the hands of non-specialists is driving current technical and application developments, the ultimate goal being, in a far future, the integration of a spectrometer into a smartphone or any other smart device (tablet, watch, …). In this article, we present the results of our study on the evolution of the compact spectrometers market towards widespread industrial use and consumer applications. Presently, the main market of compact spectrometers remains academic labs. However, they have been adopted on some industrial applications such as optical source characterization (mainly laser and LEDs). In a near future, manufacturers of compact spectrometers target the following industrial applications: agriculture crop monitoring, food process control or pharmaceuticals quality control. Next steps will be to get closer to the consumer market with point-of-care applications such as glucose detection for diabetics, for example. To reach these objectives, technological breakthroughs will be necessary. Recent progresses have already allowed the release of micro-spectrometers. They take advantage of new micro-technologies such as MEMS (MicroElectroMechanical Systems), MOEMS (Micro-Opto-Electro-Mechanical Systems), micro-mirrors arrays to reduce cost and size while allowing good performance and high volume manufacturability. Integrated photonics is being investigated for future developments. It will also require new business models and new market approaches. Indeed, spreading spectroscopy to more industrial and consumer applications will require spectrometers manufacturers to get closer to the end-users and develop application-oriented products.

Dietary supplement usage and motivation in Brazilian road runners.

PubMed

Salgado, José Vítor Vieira; Lollo, Pablo Christiano Barboza; Amaya-Farfan, Jaime; Chacon-Mikahil, Mara PatríciaTraina

2014-01-01

The consumption of dietary supplements is highest among athletes and it can represent potential a health risk for consumers. The aim of this study was to determine the prevalence of consumption of dietary supplements by road runners. We interviewed 817 volunteers from four road races in the Brazilian running calendar. The sample consisted of 671 male and 146 female runners with a mean age of 37.9 ± 12.4 years. Of the sample, 28.33% reported having used some type of dietary supplement. The main motivation for this consumption is to increase in stamina and improve performance. The probability of consuming dietary supplements increased 4.67 times when the runners were guided by coaches. The consumption of supplements was strongly correlated (r = 0.97) with weekly running distance, and also highly correlated (r = 0.86) with the number of years the sport had been practiced. The longer the runner had practiced the sport, the higher the training volume and the greater the intake of supplements. The five most frequently cited reasons for consumption were: energy enhancement (29.5%), performance improvement (17.1%), increased level of endurance (10.3%), nutrient replacement (11.1%), and avoidance of fatigue (10.3%). About 30% of the consumers declared more than one reason for taking dietary supplements. The most consumed supplements were: carbohydrates (52.17%), vitamins (28.70%), and proteins (13.48%). Supplement consumption by road runners in Brazil appeared to be guided by the energy boosting properties of the supplement, the influence of coaches, and the experience of the user. The amount of supplement intake seemed to be lower among road runners than for athletes of other sports. We recommend that coaches and nutritionists emphasise that a balanced diet can meet the needs of physically active people.

Neurofunctional correlates of ethical, food-related decision-making.

PubMed

Cherry, J Bradley C; Bruce, Jared M; Lusk, Jayson L; Crespi, John M; Lim, Seung-Lark; Bruce, Amanda S

2015-01-01

For consumers today, the perceived ethicality of a food's production method can be as important a purchasing consideration as its price. Still, few studies have examined how, neurofunctionally, consumers are making ethical, food-related decisions. We examined how consumers' ethical concern about a food's production method may relate to how, neurofunctionally, they make decisions whether to purchase that food. Forty-six participants completed a measure of the extent to which they took ethical concern into consideration when making food-related decisions. They then underwent a series of functional magnetic resonance imaging (fMRI) scans while performing a food-related decision-making (FRDM) task. During this task, they made 56 decisions whether to purchase a food based on either its price (i.e., high or low, the "price condition") or production method (i.e., with or without the use of cages, the "production method condition"), but not both. For 23 randomly selected participants, we performed an exploratory, whole-brain correlation between ethical concern and differential neurofunctional activity in the price and production method conditions. Ethical concern correlated negatively and significantly with differential neurofunctional activity in the left dorsolateral prefrontal cortex (dlPFC). For the remaining 23 participants, we performed a confirmatory, region-of-interest (ROI) correlation between the same variables, using an 8-mm3 volume situated in the left dlPFC. Again, the variables correlated negatively and significantly. This suggests, when making ethical, food-related decisions, the more consumers take ethical concern into consideration, the less they may rely on neurofunctional activity in the left dlPFC, possibly because making these decisions is more routine for them, and therefore a more perfunctory process requiring fewer cognitive resources.

Evaluation of Furfuryl Alcohol Sensitization Potential Following Dermal and Pulmonary Exposure: Enhancement of Airway Responsiveness

PubMed Central

Franko, Jennifer; Jackson, Laurel G.; Hubbs, Ann; Kashon, Michael; Meade, B. J.; Anderson, Stacey E.

2015-01-01

Furfuryl alcohol is considered by the U.S. Environmental Protection Agency to be a high volume production chemical, with over 1 million pounds produced annually. Due to its high production volume and its numerous industrial and consumer uses, there is considerable potential for work-related exposure, as well as exposure to the general population, through pulmonary, oral, and dermal routes of exposure. Human exposure data report a high incidence of asthma in foundry mold workers exposed to furan resins, suggesting potential immunologic effects. Although furfuryl alcohol was nominated and evaluated for its carcinogenic potential by the National Toxicology Program, studies evaluating its immunotoxicity are lacking. The studies presented here evaluated the immunotoxic potential of furfuryl alcohol following exposure by the dermal and pulmonary routes using a murine model. When tested in a combined irritancy local lymph node assay, furfuryl alcohol was identified to be an irritant and mild sensitizer (EC3 = 25.6%). Pulmonary exposure to 2% furfuryl alcohol resulted in enhanced airway hyperreactivity, eosinophilic infiltration into the lungs, and enhanced cytokine production (IL-4, IL-5, and interferon-γ) by ex vivo stimulated lung-associated draining lymphoid cells. Airway hyperreactivity and eosinophilic lung infiltration were augmented by prior dermal exposure to furfuryl alcohol. These results suggest that furfuryl alcohol may play a role in the development of allergic airway disease and encourage the need for additional investigation. PMID:22003193

Automated age-related macular degeneration classification in OCT using unsupervised feature learning

NASA Astrophysics Data System (ADS)

Venhuizen, Freerk G.; van Ginneken, Bram; Bloemen, Bart; van Grinsven, Mark J. J. P.; Philipsen, Rick; Hoyng, Carel; Theelen, Thomas; Sánchez, Clara I.

2015-03-01

Age-related Macular Degeneration (AMD) is a common eye disorder with high prevalence in elderly people. The disease mainly affects the central part of the retina, and could ultimately lead to permanent vision loss. Optical Coherence Tomography (OCT) is becoming the standard imaging modality in diagnosis of AMD and the assessment of its progression. However, the evaluation of the obtained volumetric scan is time consuming, expensive and the signs of early AMD are easy to miss. In this paper we propose a classification method to automatically distinguish AMD patients from healthy subjects with high accuracy. The method is based on an unsupervised feature learning approach, and processes the complete image without the need for an accurate pre-segmentation of the retina. The method can be divided in two steps: an unsupervised clustering stage that extracts a set of small descriptive image patches from the training data, and a supervised training stage that uses these patches to create a patch occurrence histogram for every image on which a random forest classifier is trained. Experiments using 384 volume scans show that the proposed method is capable of identifying AMD patients with high accuracy, obtaining an area under the Receiver Operating Curve of 0:984. Our method allows for a quick and reliable assessment of the presence of AMD pathology in OCT volume scans without the need for accurate layer segmentation algorithms.

An innovative demonstration of high power density in a compact MDH (magnetohydrodynamic) generator

NASA Astrophysics Data System (ADS)

Schmidt, H. J.; Lineberry, J. T.; Chapman, J. N.

1990-06-01

The present program was conducted by the University of Tennessee Space Institute (UTSI). It was by its nature a high risk experimental program to demonstrate the feasibility of high power density operation in a laboratory scale combustion driven MHD generator. Maximization of specific energy was not a consideration for the present program, but the results have implications in this regard by virtue of high energy fuel used. The power density is the ratio of the electrical energy output to the internal volume of the generator channel. The MHD process is a volumetric process and the power density is therefore a direct measure of the compactness of the system. Specific energy, is the ratio of the electrical energy output to consumable energy used for its production. The two parameters are conceptually interrelated. To achieve high power density and implied commensurate low system volume and weight, it was necessary to use an energetic fuel. The high energy fuel of choice was a mixture of powdered aluminum and carbon seeded with potassium carbonate and burned with gaseous oxygen. The solid fuel was burned in a hybrid combustion scheme wherein the fuel was cast within a cylindrical combustor in analogy with a solid propellant rocket motor. Experimental data is limited to gross channel output current and voltage, magnetic field strength, fuel and oxidizer flow rates, flow train external temperatures and combustor pressure. Similarly, while instantaneous oxidizer flow rates were measured, only average fuel consumption based on pre and post test component weights and dimensions was possible.

Determining Methane Leak Locations and Rates with a Wireless Network Composed of Low-Cost, Printed Sensors

NASA Astrophysics Data System (ADS)

Smith, C. J.; Kim, B.; Zhang, Y.; Ng, T. N.; Beck, V.; Ganguli, A.; Saha, B.; Daniel, G.; Lee, J.; Whiting, G.; Meyyappan, M.; Schwartz, D. E.

2015-12-01

We will present our progress on the development of a wireless sensor network that will determine the source and rate of detected methane leaks. The targeted leak detection threshold is 2 g/min with a rate estimation error of 20% and localization error of 1 m within an outdoor area of 100 m2. The network itself is composed of low-cost, high-performance sensor nodes based on printed nanomaterials with expected sensitivity below 1 ppmv methane. High sensitivity to methane is achieved by modifying high surface-area-to-volume-ratio single-walled carbon nanotubes (SWNTs) with materials that adsorb methane molecules. Because the modified SWNTs are not perfectly selective to methane, the sensor nodes contain arrays of variously-modified SWNTs to build diversity of response towards gases with adsorption affinity. Methane selectivity is achieved through advanced pattern-matching algorithms of the array's ensemble response. The system is low power and designed to operate for a year on a single small battery. The SWNT sensing elements consume only microwatts. The largest power consumer is the wireless communication, which provides robust, real-time measurement data. Methane leak localization and rate estimation will be performed by machine-learning algorithms built with the aid of computational fluid dynamics simulations of gas plume formation. This sensor system can be broadly applied at gas wells, distribution systems, refineries, and other downstream facilities. It also can be utilized for industrial and residential safety applications, and adapted to other gases and gas combinations.

40 CFR 600.002-93 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... traveled by an automobile or group of automobiles per volume of fuel consumed as computed in § 600.113 or § 600.207; or (ii) The equivalent petroleum-based fuel economy for an electrically powered automobile as... means the equivalent petroleum-based fuel economy value as determined by the calculation procedure...

Beginning English: An Instructional Guide for ESL Teachers.

ERIC Educational Resources Information Center

Brower, Lynne

An instructional guide for English as a Second Language (ESL) teachers is presented in this volume. The 18-week program contains the following modules, each of which includes sections on civics and structure: human relations; general information; housing; consumer education (money, banking, and shopping modules); occupations; health (two modules…

Minicars research safety vehicle program. Phase 3. Volume 2. Appendices. Final report Jan 1977-Sep 1981

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ausherman, V.K.; Khadikar, A.V.; Syson, S.R.

1981-09-01

The objective of the RSV Program was to provide research and test data applicable to the automobile safety performance requirements for the mid-1980s, and to evaluate the compatibility of these requirements with environmental policies, efficient energy utilization, and consumer economic considerations.

Economic Education Experiences of Enterprising Teachers. Volume 30.

ERIC Educational Resources Information Center

Nappi, Andrew T., Ed.

This book describes award-winning teacher-developed projects and courses in economics. The reports are condensed versions of the original projects and are divided into grade levels. Primary Level includes: "Peanut Economics" (Janet Lancaster; Dena L. Meade); "Consumer Education Circus" (Pearl Eloshway; Linda McGeehan); "Critter Cards" (Joyce G.…

Developing Globally Minded, Critical Media Literacy Skills

ERIC Educational Resources Information Center

Harshman, Jason

2017-01-01

The transnational movement of people and ideas continues to reshape how we imagine places and cultures. Considering the volume of information and entertainment delivered and consumed via mass media, global educators are tasked with engaging students in learning activities that help them develop skill sets that include a globally minded, critical…

16 CFR 306.8 - Certification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... who is not a consumer. (a) In the case of gasoline, if you do not blend the gasoline with other.... If you blend the gasoline with other gasoline, you must certify consistent with your determination of the average, weighted by volume, of the octane ratings certified to you for each gasoline in the blend...

Water footprint as a tool for integrated water resources management

NASA Astrophysics Data System (ADS)

Aldaya, Maite; Hoekstra, Arjen

2010-05-01

In a context where water resources are unevenly distributed and, in some regions precipitation and drought conditions are increasing, enhanced water management is a major challenge to final consumers, businesses, water resource users, water managers and policymakers in general. By linking a large range of sectors and issues, virtual water trade and water footprint analyses provide an appropriate framework to find potential solutions and contribute to a better management of water resources. The water footprint is an indicator of freshwater use that looks not only at direct water use of a consumer or producer, but also at the indirect water use. The water footprint of a product is the volume of freshwater used to produce the product, measured over the full supply chain. It is a multi-dimensional indicator, showing water consumption volumes by source and polluted volumes by type of pollution; all components of a total water footprint are specified geographically and temporally. The water footprint breaks down into three components: the blue (volume of freshwater evaporated from surface or groundwater systems), green (water volume evaporated from rainwater stored in the soil as soil moisture) and grey water footprint (the volume of polluted water associated with the production of goods and services). Closely linked to the concept of water footprint is that of virtual water trade, which represents the amount of water embedded in traded products. Many nations save domestic water resources by importing water-intensive products and exporting commodities that are less water intensive. National water saving through the import of a product can imply saving water at a global level if the flow is from sites with high to sites with low water productivity. Virtual water trade between nations and even continents could thus be used as an instrument to improve global water use efficiency and to achieve water security in water-poor regions of the world. The virtual water trade together with the water footprint concept could thus provide an appropriate framework to support more optimal water management practices by informing production and trade decisions and the development and adoption of water efficient technology. In order to move towards better water governance however a further integration of water-related concerns into water-related sectoral policies is paramount. This will require a concerted effort by all stakeholders, the willingness to adopt a total resource view where water is seen as a key, cross-sectoral input for development and growth, a mix of technical approaches, and the courage to undertake and fund water sector reforms. We are convinced that the water footprint analysis can provide a sufficiently robust fact base for meaningful stakeholder dialogue and action towards solutions.

Total phenolic content, consumer acceptance, and instrumental analysis of bread made with grape seed flour.

PubMed

Hoye, Clifford; Ross, Carolyn F

2011-09-01

Grape seed flour (GSF) from grape pomace, a waste product generated during winemaking, was explored for use in bread production due to its potential health benefits. This study evaluated the consumer acceptance and physical properties of bread, including total phenolic content (TPC), made with varying levels of GSF. Dough and breads were prepared using different levels of replacement of hard red spring wheat flour (HRS) with GSF (0 to 10 g GSF/100 g HRS) and stored for 0, 2, or 6 wk at -20 °C. Replacement of 10 g GSF/100 g HRS increased the bread TPC from 0.064 mg tannic acid/g dry weight to 4.25 mg tannic acid/g dry weight. Consumer acceptance and instrumental analyses were used to investigate changes in sensory and texture properties due to GSF replacement. Replacement above 5 g GSF/100 g HRS decreased the loaf brightness and volume, with an increase in the bread hardness and porosity. Generally, breads containing ≥ 7.5 g GSF/100 g HRS were characterized by lower consumer acceptance. A reduction in overall and bitterness acceptance was observed in bread at 10 g GSF/100 g HRS, with decreased acceptance of astringency and sweetness at 7.5 and 10 g GSF/100 g HRS. Based on these results, the replacement of 5 g GSF/100 g HRS is recommended for the production of fortified breads with acceptable physical and sensory properties and high TPC activity compared to refined bread. This study shows that grape seed flour (GSF) can be used to replace hard red spring wheat flour (HRS) in bread production, with moderate impact on the physical and sensory properties of the bread. Replacement of up to 10 g GSF/100 g HRS significantly decreased overall consumer acceptance of the bread, with lower consumer acceptance of sweetness and astringency at 7.5 and 10 g GSF/100 g HRS. Thus, a replacement value of 5 g GSF/100 g HRS is recommended for the production of fortified breads. © 2011 Institute of Food Technologists®

Dr Google Is Here to Stay but Health Care Professionals Are Still Valued: An Analysis of Health Care Consumers’ Internet Navigation Support Preferences

PubMed Central

Hoti, Kreshnik; Hughes, Jeffery David; Emmerton, Lynne

2017-01-01

Background The Internet offers great opportunities for consumers to be informed about their health. However, concerns have been raised regarding its impact on the traditional health consumer-health professional relationship. Our recent survey of 400 Australian adults identified that over half of consumers required some form of navigational support in locating appropriate Web-based health information. We propose that support provided by health professionals would be preferred by consumers; this preference is regardless of whether consumers have a need for navigational support. Secondary analysis of the survey dataset is presented here to quantify consumer-reported support preferences and barriers when navigating Web-based health information. Objective We aimed to quantitatively identify consumers’ support preferences for locating Web-based health information and their barriers when navigating Web-based health information. We also aimed to compare such preferences and barriers between consumers identified as needing and not needing support when locating Web-based health information. Methods Chi-square (χ2) tests identified whether each listed support preference differed between subgroups of consumers classified as needing (n=205, 51.3%) or not needing (n=195, 48.8%) navigational support; degree of association, via phi coefficient (φ) tests, were also considered to ascertain the likely practical significance of any differences. This was repeated for each listed barrier. Free-text responses regarding additional support preferences were descriptively analyzed and compared with the quantitative findings to provide a richer understanding of desired support for health information searches. Results Of the 400 respondents, the most preferred mode of navigational support was involvement of health professionals; this was reported by participants identified as needing and not needing navigational support. While there was a significant difference between groups, the degree of association was small (χ21 [N=400]=13.2; P<.001; φ=.18). Qualitative data from the free-text responses supported consumers’ desire for health professional involvement. The two most commonly reported barriers when navigating desired Web-based health information were (1) volume of available information and (2) inconsistency of information between sources; these were reported by participants with and without a need for navigational support. While participants identified with a need for navigational support were more likely to report volume (χ21 [N=387]= 4.40; P=.04; φ=.11) and inconsistency of information (χ21 [N=387]= 16.10, P<.001, φ=.20) as barriers, the degrees of association were small to moderate. Conclusions Despite concerns in the literature that the popularity of the Internet could compromise the health consumer-health professional relationship, our findings suggest the contrary. Our findings showed that health professionals were found to be the most commonly preferred mode of navigational support, even among consumers classified as not needing navigational support. Further research into how health professionals could assist consumers with Web-based health information seeking could strengthen the health consumer-health professional relationship amidst the growing use of “Dr Google.” PMID:28615156

Long-term consumption of a raw food diet is associated with favorable serum LDL cholesterol and triglycerides but also with elevated plasma homocysteine and low serum HDL cholesterol in humans.

PubMed

Koebnick, Corinna; Garcia, Ada L; Dagnelie, Pieter C; Strassner, Carola; Lindemans, Jan; Katz, Norbert; Leitzmann, Claus; Hoffmann, Ingrid

2005-10-01

High consumption of vegetables and fruits is associated with reduced risk for cardiovascular disease. However, little information is available about diets based predominantly on consumption of fruits and their health consequences. We investigated the effects of an extremely high dietary intake of raw vegetables and fruits (70-100% raw food) on serum lipids and plasma vitamin B-12, folate, and total homocysteine (tHcy). In a cross-sectional study, the lipid, folate, vitamin B-12, and tHcy status of 201 adherents to a raw food diet (94 men and 107 women) were examined. The participants consumed approximately 1500-1800 g raw food of plant origin/d mainly as vegetables or fruits. Of the participants, 14% had high serum LDL cholesterol concentrations, 46% had low serum HDL cholesterol, and none had high triglycerides. Of raw food consumers, 38% were vitamin B-12 deficient, whereas 12% had an increased mean corpuscular volume (MCV). Plasma tHcy concentrations were correlated with plasma vitamin B-12 concentrations (r = -0.450, P < 0.001), but not with plasma folate. Plasma tHcy and MCV concentrations were higher in those in the lowest quintile of consumption of food of animal origin (P(trend) < 0.001). This study indicates that consumption of a strict raw food diet lowers plasma total cholesterol and triglyceride concentrations, but also lowers serum HDL cholesterol and increases tHcy concentrations due to vitamin B-12 deficiency.

Predictors of Dietary Supplement Use by U.S. Coast Guard Personnel

PubMed Central

Austin, Krista G.; Price, Lori Lyn; McGraw, Susan M.; Lieberman, Harris R.

2015-01-01

Background Personnel in Armed Forces entities such as the US Coast Guard (USCG) engage in strenuous tasks requiring high levels of physiological and psychological fitness. Previous reports have found increased prevalence of dietary supplement (DS) use by military personnel to meet the demands of their occupation. Objective This study assessed DS prevalence and patterns of use in USCG personnel and compared these findings to reports from other Armed Forces personnel. Design Use of DS by USCG personnel (n = 1059) was assessed by survey at USCG installations. Data were weighted by age, sex, and rank to be representative of total USCG demographics. Results Seventy percent of USCG personnel reported using a DS at least 1 time/wk. Thirty-three percent used 1–2 DS ≤ 1 time/wk, 18% 3–4 DS ≥ 1 time/wk, and almost 19% ≥ 5 DS ≥ 1 time/wk. Average expenditure on DSs by UCSG personnel was $40/mo. More than 47% of USCG personnel used a multivitamin and mineral, 33% consumed protein supplements, 22% used individual vitamins and minerals, 23% reported taking combination products, and 9% consumed herbal supplements. Increased use of DS use was associated with high intensity operational occupations, participating in high volumes of aerobic exercise and strength training. Use of DS was not associated with age, education or body mass index. Conclusion Occupation is an important determinate of DS use. Prevalence of DS use by USCG personnel is greater than reported for other Armed Forces personnel and reflects high levels of participation in aerobic and strength training activities. PMID:26230407

Predictors of Dietary Supplement Use by U.S. Coast Guard Personnel.

PubMed

Austin, Krista G; Price, Lori Lyn; McGraw, Susan M; Lieberman, Harris R

2015-01-01

Personnel in Armed Forces entities such as the US Coast Guard (USCG) engage in strenuous tasks requiring high levels of physiological and psychological fitness. Previous reports have found increased prevalence of dietary supplement (DS) use by military personnel to meet the demands of their occupation. This study assessed DS prevalence and patterns of use in USCG personnel and compared these findings to reports from other Armed Forces personnel. Use of DS by USCG personnel (n = 1059) was assessed by survey at USCG installations. Data were weighted by age, sex, and rank to be representative of total USCG demographics. Seventy percent of USCG personnel reported using a DS at least 1 time/wk. Thirty-three percent used 1-2 DS ≤ 1 time/wk, 18% 3-4 DS ≥ 1 time/wk, and almost 19% ≥ 5 DS ≥ 1 time/wk. Average expenditure on DSs by UCSG personnel was $40/mo. More than 47% of USCG personnel used a multivitamin and mineral, 33% consumed protein supplements, 22% used individual vitamins and minerals, 23% reported taking combination products, and 9% consumed herbal supplements. Increased use of DS use was associated with high intensity operational occupations, participating in high volumes of aerobic exercise and strength training. Use of DS was not associated with age, education or body mass index. Occupation is an important determinate of DS use. Prevalence of DS use by USCG personnel is greater than reported for other Armed Forces personnel and reflects high levels of participation in aerobic and strength training activities.

Selling blood and gametes during tough economic times: insights from Google search.

PubMed

Wu, Jonathan A; Ngo, Tin C; Rothman, Cappy; Breyer, Benjamin N; Eisenberg, Michael L

2015-10-01

To use Google Insights search volume and publicly available economic indicators to test the hypothesis that sperm, egg, and blood donations increase during economic downturns and to demonstrate the feasibility of using Google search volume data to predict national trends in actual sperm, egg, and blood donations rates. Cross-correlation statistical analysis comparing Google search data for terms relating to blood, egg, and sperm donations with various economic indicators including the S&P 500 closing values, gross domestic product (GDP), the U.S. Index of Leading Indicators (U.S. Leading Index), gross savings rate, mortgage interest rates, unemployment rate, and consumer price index (CPI) from 2004-2011. A secondary analysis determined the Pearson correlation coefficient between Google search data with actual sperm, egg, and blood donation volume in the U.S. as measured by California Cryobank, the National Assisted Reproductive Technology Surveillance System, and the National Blood Collection and Utilization Survey, respectively. Significance of cross-correlation and Pearson correlation analysis as indicated by p value. There were several highly significant cross-correlation relationships between search volume and various economic indicators. Correlation between Google search volume for the term 'sperm donation,' 'egg donation,' and 'blood donation' with actual number of sperm, egg and blood donations in the United States demonstrated Pearson correlation coefficients of 0.2 (p > 0.10), -0.1 (p > 0.10), and 0.07 (p > 0.10), respectively. Temporal analysis showed an improved correlation coefficient of 0.9 (p < 0.05) for blood donation when shifted 12 months later relative to Google search volume. Google search volume data for search terms relating to sperm, egg, and blood donation increase during economic downturns. This finding suggests gamete and bodily fluid donations are influenced by market forces like other commodities. Google search may be useful for predicting blood donation trends but is more limited in predicting actual semen and oocyte donation patterns.

Consuming fructose-sweetened, not glucose-sweetened, beverages increases visceral adiposity and lipids and decreases insulin sensitivity in overweight/obese humans

PubMed Central

Stanhope, Kimber L.; Schwarz, Jean Marc; Keim, Nancy L.; Griffen, Steven C.; Bremer, Andrew A.; Graham, James L.; Hatcher, Bonnie; Cox, Chad L.; Dyachenko, Artem; Zhang, Wei; McGahan, John P.; Seibert, Anthony; Krauss, Ronald M.; Chiu, Sally; Schaefer, Ernst J.; Ai, Masumi; Otokozawa, Seiko; Nakajima, Katsuyuki; Nakano, Takamitsu; Beysen, Carine; Hellerstein, Marc K.; Berglund, Lars; Havel, Peter J.

2009-01-01

Studies in animals have documented that, compared with glucose, dietary fructose induces dyslipidemia and insulin resistance. To assess the relative effects of these dietary sugars during sustained consumption in humans, overweight and obese subjects consumed glucose- or fructose-sweetened beverages providing 25% of energy requirements for 10 weeks. Although both groups exhibited similar weight gain during the intervention, visceral adipose volume was significantly increased only in subjects consuming fructose. Fasting plasma triglyceride concentrations increased by approximately 10% during 10 weeks of glucose consumption but not after fructose consumption. In contrast, hepatic de novo lipogenesis (DNL) and the 23-hour postprandial triglyceride AUC were increased specifically during fructose consumption. Similarly, markers of altered lipid metabolism and lipoprotein remodeling, including fasting apoB, LDL, small dense LDL, oxidized LDL, and postprandial concentrations of remnant-like particle–triglyceride and –cholesterol significantly increased during fructose but not glucose consumption. In addition, fasting plasma glucose and insulin levels increased and insulin sensitivity decreased in subjects consuming fructose but not in those consuming glucose. These data suggest that dietary fructose specifically increases DNL, promotes dyslipidemia, decreases insulin sensitivity, and increases visceral adiposity in overweight/obese adults. PMID:19381015

A rapid method for estimation of Pu-isotopes in urine samples using high volume centrifuge.

PubMed

Kumar, Ranjeet; Rao, D D; Dubla, Rupali; Yadav, J R

2017-07-01

The conventional radio-analytical technique used for estimation of Pu-isotopes in urine samples involves anion exchange/TEVA column separation followed by alpha spectrometry. This sequence of analysis consumes nearly 3-4 days for completion. Many a times excreta analysis results are required urgently, particularly under repeat and incidental/emergency situations. Therefore, there is need to reduce the analysis time for the estimation of Pu-isotopes in bioassay samples. This paper gives the details of standardization of a rapid method for estimation of Pu-isotopes in urine samples using multi-purpose centrifuge, TEVA resin followed by alpha spectrometry. The rapid method involves oxidation of urine samples, co-precipitation of plutonium along with calcium phosphate followed by sample preparation using high volume centrifuge and separation of Pu using TEVA resin. Pu-fraction was electrodeposited and activity estimated using 236 Pu tracer recovery by alpha spectrometry. Ten routine urine samples of radiation workers were analyzed and consistent radiochemical tracer recovery was obtained in the range 47-88% with a mean and standard deviation of 64.4% and 11.3% respectively. With this newly standardized technique, the whole analytical procedure is completed within 9h (one working day hour). Copyright © 2017 Elsevier Ltd. All rights reserved.

The Next Technology Revolution - Nano Electronic Technology

NASA Astrophysics Data System (ADS)

Turlik, Iwona

2004-03-01

Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

New approach for food allergy management using low-dose oral food challenges and low-dose oral immunotherapies.

PubMed

Yanagida, Noriyuki; Okada, Yu; Sato, Sakura; Ebisawa, Motohiro

2016-04-01

A number of studies have suggested that a large subset of children (approximately 70%) who react to unheated milk or egg can tolerate extensively heated forms of these foods. A diet that includes baked milk or egg is well tolerated and appears to accelerate the development of regular milk or egg tolerance when compared with strict avoidance. However, the indications for an oral food challenge (OFC) using baked products are limited for patients with high specific IgE values or large skin prick test diameters. Oral immunotherapies (OITs) are becoming increasingly popular for the management of food allergies. However, the reported efficacy of OIT is not satisfactory, given the high frequency of symptoms and requirement for long-term therapy. With food allergies, removing the need to eliminate a food that could be consumed in low doses could significantly improve quality of life. This review discusses the importance of an OFC and OIT that use low doses of causative foods as the target volumes. Utilizing an OFC or OIT with a low dose as the target volume could be a novel approach for accelerating the tolerance to causative foods. Copyright © 2015 Japanese Society of Allergology. Production and hosting by Elsevier B.V. All rights reserved.

Automated sample preparation using membrane microtiter extraction for bioanalytical mass spectrometry.

PubMed

Janiszewski, J; Schneider, P; Hoffmaster, K; Swyden, M; Wells, D; Fouda, H

1997-01-01

The development and application of membrane solid phase extraction (SPE) in 96-well microtiter plate format is described for the automated analysis of drugs in biological fluids. The small bed volume of the membrane allows elution of the analyte in a very small solvent volume, permitting direct HPLC injection and negating the need for the time consuming solvent evaporation step. A programmable liquid handling station (Quadra 96) was modified to automate all SPE steps. To avoid drying of the SPE bed and to enhance the analytical precision a novel protocol for performing the condition, load and wash steps in rapid succession was utilized. A block of 96 samples can now be extracted in 10 min., about 30 times faster than manual solvent extraction or single cartridge SPE methods. This processing speed complements the high-throughput speed of contemporary high performance liquid chromatography mass spectrometry (HPLC/MS) analysis. The quantitative analysis of a test analyte (Ziprasidone) in plasma demonstrates the utility and throughput of membrane SPE in combination with HPLC/MS. The results obtained with the current automated procedure compare favorably with those obtained using solvent and traditional solid phase extraction methods. The method has been used for the analysis of numerous drug prototypes in biological fluids to support drug discovery efforts.

Determination of diflubenzuron and chlorbenzuron in fruits by combining acetonitrile-based extraction with dispersive liquid-liquid microextraction followed by high-performance liquid chromatography.

PubMed

Ruan, Chunqiang; Zhao, Xiang; Liu, Chenglan

2015-09-01

In this study, a simple and low-organic-solvent-consuming method combining an acetonitrile-partitioning extraction procedure followed by "quick, easy, cheap, effective, rugged and safe" cleanup with ionic-liquid-based dispersive liquid-liquid microextraction and high-performance liquid chromatography with diode array detection was developed for the determination of diflubenzuron and chlorbenzuron in grapes and pears. Ionic-liquid-based dispersive liquid-liquid microextraction was performed using the ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate as the extractive solvent and acetonitrile extract as the dispersive solvent. The main factors influencing the efficiency of the dispersive liquid-liquid microextraction were evaluated, including the extractive solvent type and volume and the dispersive solvent volume. The validation parameters indicated the suitability of the method for routine analyses of benzoylurea insecticides in a large number of samples. The relative recoveries at three spiked levels ranged between 98.6 and 109.3% with relative standard deviations of less than 5.2%. The limit of detection was 0.005 mg/kg for the two insecticides. The proposed method was successfully used for the rapid determination of diflubenzuron and chlorbenzuron residues in real fruit samples. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Is Satisfaction with the Acute-Care Experience Higher amongst Consumers Treated in the Private Sector? A Survey of Public and Private Sector Arthroplasty Recipients

PubMed Central

Naylor, Justine M.; Descallar, Joseph; Grootemaat, Mechteld; Badge, Helen; Harris, Ian A.; Simpson, Grahame; Jenkin, Deanne

2016-01-01

Background Consumer satisfaction with the acute-care experience could reasonably be expected to be higher amongst those treated in the private sector compared to those treated in the public sector given the former relies on high-level satisfaction of its consumers and their subsequent recommendations to thrive. The primary aims of this study were to determine, in a knee or hip arthroplasty cohort, if surgery in the private sector predicts greater overall satisfaction with the acute-care experience and greater likelihood to recommend the same hospital. A secondary aim was to determine whether satisfaction across a range of service domains is also higher in the private sector. Methods A telephone survey was conducted 35 days post-surgery. The hospital cohort comprised eight public and seven private high-volume arthroplasty providers. Consumers rated overall satisfaction with care out of 100 and likeliness to recommend their hospital on a 5-point Likert scale. Additional Likert-style questions were asked covering specific service domains. Generalized estimating equation models were used to analyse overall satisfaction (dichotomised as ≥ 90 or < 90) and future recommendations for care (dichotomised as ‘definitely recommend’ or ‘other’), whilst controlling for covariates. The proportions of consumers in each sector reporting the best Likert response for each individual domain were compared using non-parametric tests. Results 457 survey respondents (n = 210 private) were included. Less patient-reported joint impairment pre-surgery [OR 1.03 (95% CI 1.01–1.05)] and absence of an acute complication (OR 2.13 95% CI 1.41–3.23) significantly predicted higher overall satisfaction. Hip arthroplasty [OR 1.84 (1.1–2.96)] and an absence of an acute complication [OR 2.31 (1.28–4.17] significantly predicted greater likelihood for recommending the hospital. The only care domains where the private out-performed the public sector were hospitality (46.7 vs 35.6%, p <0.01) and frequency of surgeon visitation (76.4 vs 65.8%, p = 0.03). Conclusions Arthroplasty consumers treated in the private sector are not more satisfied with their acute-care experience nor are they more likely to recommend their hospital provider. Rather, avoidance of complications in either sector appears to result in improved satisfaction as well as a greater likelihood that patients would recommend their hospital provider. PMID:27490358

High volume medical web sites.

PubMed

Elliott, B; Elliott, G

2000-01-01

In 1998, 22 million individuals reported surfing the web for medical information, and this number will increase to over 30 million by 2000. Fifteen of the highest volume medical web sites are described in this paper. Sponsorship and/or ownership of the fifteen sites varied. The government sponsors one, and some are the products of well-known educational institutions. One site is supported by a consumer health organization, and the American Medical Association was in the top 15. However, the most common owners are commercial, for-profit businesses. Attributes of the ideal site were categorized, and include a robust privacy and disclosure statement with an emphasis on education and an appropriate role for advertising. The covering of Complementary and Alternative Medicine (CAM) should be in a balanced and unbiased manner. There has to be an emphasis on knowledge based evidence as opposed to testimonials, and sources should be timely and reviewed. Bibliographies of authors need to be available. Hyperlinking to other web resources is valuable, as even the largest of sites cannot come close to covering all of medicine.

Paper-based Devices for Isolation and Characterization of Extracellular Vesicles

PubMed Central

Chen, Chihchen; Lin, Bo-Ren; Hsu, Min-Yen; Cheng, Chao-Min

2015-01-01

Extracellular vesicles (EVs), membranous particles released from various types of cells, hold a great potential for clinical applications. They contain nucleic acid and protein cargo and are increasingly recognized as a means of intercellular communication utilized by both eukaryote and prokaryote cells. However, due to their small size, current protocols for isolation of EVs are often time consuming, cumbersome, and require large sample volumes and expensive equipment, such as an ultracentrifuge. To address these limitations, we developed a paper-based immunoaffinity platform for separating subgroups of EVs that is easy, efficient, and requires sample volumes as low as 10 μl. Biological samples can be pipetted directly onto paper test zones that have been chemically modified with capture molecules that have high affinity to specific EV surface markers. We validate the assay by using scanning electron microscopy (SEM), paper-based enzyme-linked immunosorbent assays (P-ELISA), and transcriptome analysis. These paper-based devices will enable the study of EVs in the clinic and the research setting to help advance our understanding of EV functions in health and disease. PMID:25867034

Advanced Water Purification System for In Situ Resource Utilization

NASA Technical Reports Server (NTRS)

Anthony, Stephen M.; Jolley, Scott T.; Captain, James G.

2013-01-01

A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extraterrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtration material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removal technique. Our studies have shown a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.

Effect of lavender (Lavandula angustifolia) and melissa (Melissa Officinalis) waste on quality and shelf life of bread.

PubMed

Vasileva, Ivelina; Denkova, Rositsa; Chochkov, Rosen; Teneva, Desislava; Denkova, Zapryana; Dessev, Tzvetelin; Denev, Petko; Slavov, Anton

2018-07-01

The effect of lavender (Lavandula angustifolia) and melissa (Melissa Officinalis) waste on preparation, characteristics and shelf life of bread was investigated. It was found that lavender and melissa waste, generated yearly in large amounts, were rich on polyphenols (especially rosmarinic acid) and aroma compounds, and exhibited high antioxidant and antimicrobial activity. The bread with 2.5% lavender waste was characterized with the highest loaf volume and loaf specific volume. The total dietary fiber increased three times and the polyphenols and flavonoids increased more than four times for breads with added 5% lavender and melissa waste, compared to control sample. The breads with 2.5% and 5% added lavender waste had increased shelf life (up to 96 h) compared to control, and no fungal or bacterial spoilage was observed during storage at 22 °C, 30 °C and 37 °C for four days. The sensory evaluation demonstrated that the consumers preferred mainly bread with 2.5% lavender waste. Copyright © 2018 Elsevier Ltd. All rights reserved.

High-Throughput 3-D Monitoring of Agricultural-Tree Plantations with Unmanned Aerial Vehicle (UAV) Technology

PubMed Central

Torres-Sánchez, Jorge; López-Granados, Francisca; Serrano, Nicolás; Arquero, Octavio; Peña, José M.

2015-01-01

The geometric features of agricultural trees such as canopy area, tree height and crown volume provide useful information about plantation status and crop production. However, these variables are mostly estimated after a time-consuming and hard field work and applying equations that treat the trees as geometric solids, which produce inconsistent results. As an alternative, this work presents an innovative procedure for computing the 3-dimensional geometric features of individual trees and tree-rows by applying two consecutive phases: 1) generation of Digital Surface Models with Unmanned Aerial Vehicle (UAV) technology and 2) use of object-based image analysis techniques. Our UAV-based procedure produced successful results both in single-tree and in tree-row plantations, reporting up to 97% accuracy on area quantification and minimal deviations compared to in-field estimations of tree heights and crown volumes. The maps generated could be used to understand the linkages between tree grown and field-related factors or to optimize crop management operations in the context of precision agriculture with relevant agro-environmental implications. PMID:26107174

Advanced Water Purification System for In Situ Resource Utilization Project

NASA Technical Reports Server (NTRS)

Anthony, Stephen M.

2014-01-01

A main goal in the field of In Situ Resource Utilization is to develop technologies that produce oxygen from regolith to provide consumables to an extratrrestrial outpost. The processes developed reduce metal oxides in the regolith to produce water, which is then electrolyzed to produce oxygen. Hydrochloric and hydrofluoric acids are byproducts of the reduction processes, which must be removed to meet electrolysis purity standards. We previously characterized Nation, a highly water selective polymeric proton-exchange membrane, as a filtrtion material to recover pure water from the contaminated solution. While the membranes successfully removed both acid contaminants, the removal efficiency of and water flow rate through the membranes were not sufficient to produce large volumes of electrolysis-grade water. In the present study, we investigated electrodialysis as a potential acid removable technique. Our studies have show a rapid and significant reduction in chloride and fluoride concentrations in the feed solution, while generating a relatively small volume of concentrated waste water. Electrodialysis has shown significant promise as the primary separation technique in ISRU water purification processes.

High-Throughput 3-D Monitoring of Agricultural-Tree Plantations with Unmanned Aerial Vehicle (UAV) Technology.

PubMed

Torres-Sánchez, Jorge; López-Granados, Francisca; Serrano, Nicolás; Arquero, Octavio; Peña, José M

2015-01-01

The geometric features of agricultural trees such as canopy area, tree height and crown volume provide useful information about plantation status and crop production. However, these variables are mostly estimated after a time-consuming and hard field work and applying equations that treat the trees as geometric solids, which produce inconsistent results. As an alternative, this work presents an innovative procedure for computing the 3-dimensional geometric features of individual trees and tree-rows by applying two consecutive phases: 1) generation of Digital Surface Models with Unmanned Aerial Vehicle (UAV) technology and 2) use of object-based image analysis techniques. Our UAV-based procedure produced successful results both in single-tree and in tree-row plantations, reporting up to 97% accuracy on area quantification and minimal deviations compared to in-field estimations of tree heights and crown volumes. The maps generated could be used to understand the linkages between tree grown and field-related factors or to optimize crop management operations in the context of precision agriculture with relevant agro-environmental implications.

Candidate solar cell materials for photovoltaic conversion in a solar power satellite /SPS/

NASA Technical Reports Server (NTRS)

Glaser, P. E.; Almgren, D. W.

1978-01-01

In recognition of the obstacles to solar-generated baseload power on earth, proposals have been made to locate solar power satellites in geosynchronous earth orbit (GEO), where solar energy would be available 24 hours a day during most of the time of the year. In an SPS, the electricity produced by solar energy conversion will be fed to microwave generators forming part of a planar phase-array transmitting antenna. The antenna is designed to precisely direct a microwave beam of very low intensity to one or more receiving antennas at desired locations on earth. At the receiving antenna, the microwave energy will be safely and efficiently reconverted to electricity and then be transmitted to consumers. An SPS system will include a number of satellites in GEO. Attention is given to the photovoltaic option for solar energy conversion in GEO, solar cell requirements, the availability of materials, the implication of large production volumes, requirements for high-volume manufacture of solar cell arrays, and the effects of concentration ratio on solar cell array area.

Predicting Consumer Biomass, Size-Structure, Production, Catch Potential, Responses to Fishing and Associated Uncertainties in the World’s Marine Ecosystems

PubMed Central

Jennings, Simon; Collingridge, Kate

2015-01-01

Existing estimates of fish and consumer biomass in the world’s oceans are disparate. This creates uncertainty about the roles of fish and other consumers in biogeochemical cycles and ecosystem processes, the extent of human and environmental impacts and fishery potential. We develop and use a size-based macroecological model to assess the effects of parameter uncertainty on predicted consumer biomass, production and distribution. Resulting uncertainty is large (e.g. median global biomass 4.9 billion tonnes for consumers weighing 1 g to 1000 kg; 50% uncertainty intervals of 2 to 10.4 billion tonnes; 90% uncertainty intervals of 0.3 to 26.1 billion tonnes) and driven primarily by uncertainty in trophic transfer efficiency and its relationship with predator-prey body mass ratios. Even the upper uncertainty intervals for global predictions of consumer biomass demonstrate the remarkable scarcity of marine consumers, with less than one part in 30 million by volume of the global oceans comprising tissue of macroscopic animals. Thus the apparently high densities of marine life seen in surface and coastal waters and frequently visited abundance hotspots will likely give many in society a false impression of the abundance of marine animals. Unexploited baseline biomass predictions from the simple macroecological model were used to calibrate a more complex size- and trait-based model to estimate fisheries yield and impacts. Yields are highly dependent on baseline biomass and fisheries selectivity. Predicted global sustainable fisheries yield increases ≈4 fold when smaller individuals (< 20 cm from species of maximum mass < 1kg) are targeted in all oceans, but the predicted yields would rarely be accessible in practice and this fishing strategy leads to the collapse of larger species if fishing mortality rates on different size classes cannot be decoupled. Our analyses show that models with minimal parameter demands that are based on a few established ecological principles can support equitable analysis and comparison of diverse ecosystems. The analyses provide insights into the effects of parameter uncertainty on global biomass and production estimates, which have yet to be achieved with complex models, and will therefore help to highlight priorities for future research and data collection. However, the focus on simple model structures and global processes means that non-phytoplankton primary production and several groups, structures and processes of ecological and conservation interest are not represented. Consequently, our simple models become increasingly less useful than more complex alternatives when addressing questions about food web structure and function, biodiversity, resilience and human impacts at smaller scales and for areas closer to coasts. PMID:26226590

Development of constitutive model for composites exhibiting time dependent properties

NASA Astrophysics Data System (ADS)

Pupure, L.; Joffe, R.; Varna, J.; Nyström, B.

2013-12-01

Regenerated cellulose fibres and their composites exhibit highly nonlinear behaviour. The mechanical response of these materials can be successfully described by the model developed by Schapery for time-dependent materials. However, this model requires input parameters that are experimentally determined via large number of time-consuming tests on the studied composite material. If, for example, the volume fraction of fibres is changed we have a different material and new series of experiments on this new material are required. Therefore the ultimate objective of our studies is to develop model which determines the composite behaviour based on behaviour of constituents of the composite. This paper gives an overview of problems and difficulties, associated with development, implementation and verification of such model.

Fat Emulsion Intragastric Stability and Droplet Size Modulate Gastrointestinal Responses and Subsequent Food Intake in Young Adults1234

PubMed Central

Hussein, Mahamoud O; Hoad, Caroline L; Wright, Jeff; Singh, Gulzar; Stephenson, Mary C; Cox, Eleanor F; Placidi, Elisa; Pritchard, Susan E; Costigan, Carolyn; Ribeiro, Henelyta; Ciampi, Elisabetta; Nandi, Asish; Hedges, Nick; Sanderson, Paul; Peters, Harry PF; Rayment, Pip; Spiller, Robin C; Gowland, Penny A

2015-01-01

Background: Intragastric creaming and droplet size of fat emulsions may affect intragastric behavior and gastrointestinal and satiety responses. Objectives: We tested the hypotheses that gastrointestinal physiologic responses and satiety will be increased by an increase in intragastric stability and by a decrease in fat droplet size of a fat emulsion. Methods: This was a double-blind, randomized crossover study in 11 healthy persons [8 men and 3 women, aged 24 ± 1 y; body mass index (in kg/m2): 24.4 ± 0.9] who consumed meals containing 300-g 20% oil and water emulsion (2220 kJ) with 1) larger, 6-μm mean droplet size (Coarse treatment) expected to cream in the stomach; 2) larger, 6-μm mean droplet size with 0.5% locust bean gum (LBG; Coarse+LBG treatment) to prevent creaming; or 3) smaller, 0.4-μm mean droplet size with LBG (Fine+LBG treatment). The participants were imaged hourly by using MRI and food intake was assessed by using a meal that participants consumed ad libitum. Results: The Coarse+LBG treatment (preventing creaming in the stomach) slowed gastric emptying, resulting in 12% higher gastric volume over time (P < 0.001), increased small bowel water content (SBWC) by 11% (P < 0.01), slowed appearance of the 13C label in the breath by 17% (P < 0.01), and reduced food intake by 9% (P < 0.05) compared with the Coarse treatment. The Fine+LBG treatment (smaller droplet size) slowed gastric emptying, resulting in 18% higher gastric volume (P < 0.001), increased SBWC content by 15% (P < 0.01), and significantly reduced food intake by 11% (P < 0.05, equivalent to an average of 411 kJ less energy consumed) compared with the Coarse+LBG treatment. These high-fat meals stimulated substantial increases in SBWC, which increased to a peak at 4 h at 568 mL (range: 150–854 mL; P < 0.01) for the Fine+LBG treatment. Conclusion: Manipulating intragastric stability and fat emulsion droplet size can influence human gastrointestinal physiology and food intake. PMID:25926408

Crystal plasticity modeling of β phase deformation in Ti-6Al-4V

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moore, John A.; Barton, Nathan R.; Florando, Jeff

Ti-6Al-4V is an alloy of titanium that dominates titanium usage in applications ranging from mass-produced consumer goods to high-end aerospace parts. The material's structure on a microscale is known to affect its mechanical properties but these effects are not fully understood. Specifically, this work will address the effects of low volume fraction intergranular β phase on Ti-6Al-4V's mechanical response during the transition from elastic to plastic deformation. A crystal plasticity-based finite element model is used to fully resolve the deformation of the β phase for the first time. This high fidelity model captures mechanisms difficult to access via experiments ormore » lower fidelity models. Lastly, the results are used to assess lower fidelity modeling assumptions and identify phenomena that have ramifications for failure of the material.« less

Crystal plasticity modeling of β phase deformation in Ti-6Al-4V

DOE PAGES

Moore, John A.; Barton, Nathan R.; Florando, Jeff; ...

2017-08-24

Ti-6Al-4V is an alloy of titanium that dominates titanium usage in applications ranging from mass-produced consumer goods to high-end aerospace parts. The material's structure on a microscale is known to affect its mechanical properties but these effects are not fully understood. Specifically, this work will address the effects of low volume fraction intergranular β phase on Ti-6Al-4V's mechanical response during the transition from elastic to plastic deformation. A crystal plasticity-based finite element model is used to fully resolve the deformation of the β phase for the first time. This high fidelity model captures mechanisms difficult to access via experiments ormore » lower fidelity models. Lastly, the results are used to assess lower fidelity modeling assumptions and identify phenomena that have ramifications for failure of the material.« less

Smart DNA Fabrication Using Sound Waves

PubMed Central

Kanigowska, Paulina; Shen, Yue; Zheng, Yijing; Rosser, Susan; Cai, Yizhi

2016-01-01

Acoustic droplet ejection (ADE) technology uses focused acoustic energy to transfer nanoliter-scale liquid droplets with high precision and accuracy. This noncontact, tipless, low-volume dispensing technology minimizes the possibility of cross-contamination and potentially reduces the costs of reagents and consumables. To date, acoustic dispensers have mainly been used in screening libraries of compounds. In this paper, we describe the first application of this powerful technology to the rapidly developing field of synthetic biology, for DNA synthesis and assembly at the nanoliter scale using a Labcyte Echo 550 acoustic dispenser. We were able to successfully downscale PCRs and the popular one-pot DNA assembly methods, Golden Gate and Gibson assemblies, from the microliter to the nanoliter scale with high assembly efficiency, which effectively cut the reagent cost by 20- to 100-fold. We envision that acoustic dispensing will become an instrumental technology in synthetic biology, in particular in the era of DNA foundries. PMID:26163567

Is there a Relationship between Patient Satisfaction and Favorable Surgical Outcomes?

PubMed Central

Tevis, Sarah E.; Kennedy, Gregory D.; Kent, K. Craig

2015-01-01

Summary Satisfaction of patients with their health care is gaining importance as a measure of hospital quality due to public reporting of these values and an increasing connection between hospital reimbursement and scores on the current tool to measure satisfaction, the Hospital Consumer Assessment of Healthcare Providers and Systems (HCAHPS) survey. We found that high hospital and surgical volume and low rates of risk-adjusted mortality are associated with high patient satisfaction. However, other favorable patient outcomes are not consistently associated with positive satisfaction scores on HCAHPS. Contributors to patients' perceptions of their care are likely multifactorial and not related just to outcomes traditionally assessed by surgeons or hospitals. Moving in a direction of patient centered care, with a focus on increased understanding and involvement of patients in the care process, will likely strengthen the relationship between surgical outcomes and patient satisfaction. PMID:26299501

Medications for High Blood Pressure

MedlinePlus

... Consumers Home For Consumers Consumer Updates Medications for High Blood Pressure Share Tweet Linkedin Pin it More sharing options Linkedin Pin it Email Print Hypertension tends to worsen with age and you cannot ...

Food risks and consumer trust. Avian influenza and the knowing and non-knowing on UK shopping floors.

PubMed

de Krom, Michiel P M M; Mol, Arthur P J

2010-12-01

Irrespective of major food crises in the 2000s consumer trust in food seems to remain high in Western Europe. Transparent information provision to consumers on food risks is a central strategy of the EU, its Member States and private food providers to build food trust among consumers. But can the interpretation of such information by consumers explain high levels of trust in food safety? Following recent outbreaks of avian influenza in the UK, this paper investigates the constitution of food trust among UK poultry consumers by focusing on the place where consumer decisions are made: the shopping floor. In-store qualitative interviews with consumers of a variety of poultry products at different shops are used to reveal the use of information in constructing trust. Besides on knowledge inducted from information provision, trust depends as much on consumer strategies to handle non-knowing of food risks. Three main forms of trust relations are distinguished, which together at a system level result in high levels of consumer trust in food. Copyright © 2010 Elsevier Ltd. All rights reserved.

Subsystems component definitions summary program

NASA Technical Reports Server (NTRS)

Scott, A. Don; Thomas, Carolyn C.; Simonsen, Lisa C.; Hall, John B., Jr.

1991-01-01

A computer program, the Subsystems Component Definitions Summary (SUBCOMDEF), was developed to provide a quick and efficient means of summarizing large quantities of subsystems component data in terms of weight, volume, resupply, and power. The program was validated using Space Station Freedom Program Definition Requirements Document data for the internal and external thermal control subsystem. Once all component descriptions, unit weights and volumes, resupply, and power data are input, the user may obtain a summary report of user-specified portions of the subsystem or of the entire subsystem as a whole. Any combination or all of the parameters of wet and dry weight, wet and dry volume, resupply weight and volume, and power may be displayed. The user may vary the resupply period according to individual mission requirements, as well as the number of hours per day power consuming components operate. Uses of this program are not limited only to subsystem component summaries. Any applications that require quick, efficient, and accurate weight, volume, resupply, or power summaries would be well suited to take advantage of SUBCOMDEF's capabilities.

System design for 3D wound imaging using low-cost mobile devices

NASA Astrophysics Data System (ADS)

Sirazitdinova, Ekaterina; Deserno, Thomas M.

2017-03-01

The state-of-the art method of wound assessment is a manual, imprecise and time-consuming procedure. Per- formed by clinicians, it has limited reproducibility and accuracy, large time consumption and high costs. Novel technologies such as laser scanning microscopy, multi-photon microscopy, optical coherence tomography and hyper-spectral imaging, as well as devices relying on the structured light sensors, make accurate wound assessment possible. However, such methods have limitations due to high costs and may lack portability and availability. In this paper, we present a low-cost wound assessment system and architecture for fast and accurate cutaneous wound assessment using inexpensive consumer smartphone devices. Computer vision techniques are applied either on the device or the server to reconstruct wounds in 3D as dense models, which are generated from images taken with a built-in single camera of a smartphone device. The system architecture includes imaging (smartphone), processing (smartphone or PACS) and storage (PACS) devices. It supports tracking over time by alignment of 3D models, color correction using a reference color card placed into the scene and automatic segmentation of wound regions. Using our system, we are able to detect and document quantitative characteristics of chronic wounds, including size, depth, volume, rate of healing, as well as qualitative characteristics as color, presence of necrosis and type of involved tissue.

Evaluation of Bosch-Based Systems Using Non-Traditional Catalysts at Reduced Temperatures

NASA Technical Reports Server (NTRS)

Abney, Morgan B.; Mansell, J. Matthew

2011-01-01

Oxygen and water resupply make open loop atmosphere revitalization (AR) systems unfavorable for long-term missions beyond low Earth orbit. Crucial to closing the AR loop are carbon dioxide reduction systems with low mass and volume, minimal power requirements, and minimal consumables. For this purpose, NASA is exploring using Bosch-based systems. The Bosch process is favorable over state-of-the-art Sabatier-based processes due to complete loop closure. However, traditional operation of the Bosch required high reaction temperatures, high recycle rates, and significant consumables in the form of catalyst resupply due to carbon fouling. A number of configurations have been proposed for next-generation Bosch systems. First, alternative catalysts (catalysts other than steel wool) can be used in a traditional single-stage Bosch reactor to improve reaction kinetics and increase carbon packing density. Second, the Bosch reactor may be split into separate stages wherein the first reactor stage is dedicated to carbon monoxide and water formation via the reverse water-gas shift reaction and the second reactor stage is dedicated to carbon formation. A series system will enable maximum efficiency of both steps of the Bosch reaction, resulting in optimized operation and maximum carbon formation rate. This paper details the results of testing of both single-stage and two-stage Bosch systems with alternative catalysts at reduced temperatures. These results are compared to a traditional Bosch system operated with a steel wool catalyst.

Biochemical Effects of Energy Drinks Alone or in Combination with Alcohol in Normal Albino Rats

PubMed Central

2014-01-01

Purpose: To determine the biochemical effects of energy drink alone or in combination with alcohol in normal albino rats. Methods: Twenty male albino rats weighing 160-180g were assigned into groups A-E of four rats per group. Group A and B rats were given low and high doses of ED, respectively, groups C and D were administered low and high doses of EDmA, respectively while group E rats were given distilled water and served as control. The treatment lasted for 30 days after which the animals were killed and their blood collected for laboratory analyses using standard methods. Results: There were no significant differences in body weight, packed cell volume and haemoglobin concentration with either administration of ED or EDmA in comparison to the control. Energy drink alone or EDmA has significant effects on total white blood cell count, plasma potassium, calcium, renal functions, liver enzymes and plasma triglycerides, with EDmA having more effects than ED alone, except for body weight where the energy drink alone has higher effect. Conclusion: Consumption of energy drink alone or in combination with alcohol is associated with significant alterations in some biochemical parameters. Caution should be exercised while consuming either of them. Public health education is urgently needed to correct the wrong impression already formed by the unsuspecting consumers, especially the youths. PMID:24409412

Differential responsiveness to caffeine and perceived effects of caffeine in moderate and high regular caffeine consumers.

PubMed

Attwood, A S; Higgs, S; Terry, P

2007-03-01

Individual differences in responsiveness to caffeine occur even within a caffeine-consuming population, but the factors that mediate differential responsiveness remain unclear. To compare caffeine's effects on performance and mood in a group of high vs moderate consumers of caffeine and to examine the potential role of subjective awareness of the effects of caffeine in mediating any differential responsiveness. Two groups of regular caffeine consumers (<200 mg/day and >200 mg/day) attended two sessions at which mood and cognitive functions were measured before and 30 min after consumption of 400-mg caffeine or placebo in a capsule. Cognitive tests included visual information processing, match-to-sample visual search (MTS) and simple and choice reaction times. Post-session questionnaires asked participants to describe any perceived effect of capsule consumption. High consumers, but not moderate consumers, demonstrated significantly faster simple and choice reaction times after caffeine relative to placebo. These effects were not attributable to obvious group differences in withdrawal or tolerance because there were no group differences in baseline mood or in reports of negative affect after caffeine. Instead, the high consumers were more likely to report experiencing positive effects of caffeine, whereas the moderate consumers were more likely to report no effect. The sensitivity of caffeine consumers to the mood- and performance-enhancing effects of caffeine is related to their levels of habitual intake. High caffeine consumers are more likely than moderate consumers to perceive broadly positive effects of caffeine, and this may contribute to their levels of use.

The High School Student as Worker/Consumer: A Workbook.

ERIC Educational Resources Information Center

New York City Board of Education, Brooklyn, NY. Div. of Curriculum and Instruction.

This workbook provides information and exercises to help high school students become educated consumers and prepare them for consumer responsibilities in the world of work. It is intended to help them develop an alert consumer outlook by sharpening mathematics and communication skills and helping them make decisions based on a sense of the value…

Consumer Education: A Teaching-Learning Unit on the Rights and Responsibilities of all Consumers and Special Problems of Elderly Consumers, Poor Consumers, Handicapped Consumers, Non-English Speaking Consumers and Nonreaders, Minors.

ERIC Educational Resources Information Center

Tennessee Univ., Knoxville.

To help high school students understand the role of consumers in the everyday world, the teaching guide presents objectives and activities related to seven consumer topics. Topics are rights and responsibilities of all consumers, common transportation concerns of consumers with special problems, and problems which particularly affect consumers who…

Sparse aperture endoscope

DOEpatents

Fitch, J.P.

1999-07-06

An endoscope is disclosed which reduces the volume needed by the imaging part, maintains resolution of a wide diameter optical system, while increasing tool access, and allows stereographic or interferometric processing for depth and perspective information/visualization. Because the endoscope decreases the volume consumed by imaging optics such allows a larger fraction of the volume to be used for non-imaging tools, which allows smaller incisions in surgical and diagnostic medical applications thus produces less trauma to the patient or allows access to smaller volumes than is possible with larger instruments. The endoscope utilizes fiber optic light pipes in an outer layer for illumination, a multi-pupil imaging system in an inner annulus, and an access channel for other tools in the center. The endoscope is amenable to implementation as a flexible scope, and thus increases it's utility. Because the endoscope uses a multi-aperture pupil, it can also be utilized as an optical array, allowing stereographic and interferometric processing. 7 figs.

Sparse aperture endoscope

DOEpatents

Fitch, Joseph P.

1999-07-06

An endoscope which reduces the volume needed by the imaging part thereof, maintains resolution of a wide diameter optical system, while increasing tool access, and allows stereographic or interferometric processing for depth and perspective information/visualization. Because the endoscope decreases the volume consumed by imaging optics such allows a larger fraction of the volume to be used for non-imaging tools, which allows smaller incisions in surgical and diagnostic medical applications thus produces less trauma to the patient or allows access to smaller volumes than is possible with larger instruments. The endoscope utilizes fiber optic light pipes in an outer layer for illumination, a multi-pupil imaging system in an inner annulus, and an access channel for other tools in the center. The endoscope is amenable to implementation as a flexible scope, and thus increases the utility thereof. Because the endoscope uses a multi-aperture pupil, it can also be utilized as an optical array, allowing stereographic and interferometric processing.

Visualization versus neuromonitoring of recurrent laryngeal nerves during thyroidectomy: what about the costs?

PubMed

Dionigi, Gianlorenzo; Bacuzzi, Alessandro; Boni, Luigi; Rausei, Stefano; Rovera, Francesca; Dionigi, Renzo

2012-04-01

The objective of the present study was to evaluate costs for thyroidectomy performed with the aid of intraoperative neural monitoring (IONM), which has gained widespread acceptance during thyroid surgery as an adjunct to the gold standard of visual nerve identification. Through a micro-costing approach, the thyroidectomy patient-care process (with and without IONM) was analyzed by considering direct costs (staff time, consumables, equipment, drugs, operating room, and general expenses). Unit costs were collected from hospital accounting and standard tariff lists. To assess the impact of the IONM technology on hospital management, three macro-scenarios were considered: (1) traditional thyroidectomy; (2) thyroidectomy with IONM in a high-volume setting (5 procedures per week); and (3) thyroidectomy with IONM in a low-volume setting (1 procedure per week). Energy-based devices (EBD) for hemostasis and dissection in thyroidectomy were also evaluated, as well as the reimbursement made by the Italian Healthcare System on the basis of diagnosis related groups (DRGs), about €2,600. Comparison between costs and the DRG fee shows an underfunding of total hospitalization costs for all thyroidectomies, regardless of IONM use (scenario 1: €3,471). The main cost drivers are consumables and technologies (25%), operating room (16%), and staff (14%). Hospitalization costs for a thyroidectomy with IONM range from €3,713 to €3,770 (scenarios 2 and 3), 5–7% higher than those for traditional thyroidectomy. Major economic differences emerge when an EBD is used (€3,969). The regional DRG tariff for thyroid surgery is barely sufficient to cover conventional surgery costs. Intraoperative neural monitoring accounts for 5–7% of the hospitalization costs for a thyroidectomy.

Final Technical Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stoessel, Chris

2013-11-13

This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency ofmore » a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.« less

A review of the world cannabis situation.

PubMed

Leggett, T

2006-01-01

Cannabis is the world's most widely cultivated and consumed illicit drug, but there remain major gaps in our understanding of global cannabis markets. For example, it appears that premium sinsemilla cannabis, often produced indoors in consumer countries, has become more potent in recent years and that its market share is also growing in some areas. This may be leading to greater localization of cannabis markets. It may also be responsible for the increase in the proportion of cannabis users in treatment populations at the international level. Assessing the extent and impact of this trend, however, is hampered both by a lack of international standards on issues such as terminology and by unanswered research questions. In order to arrive at accurate global estimates of the extent of production, there is a need for more scientific data on cannabis yields. On the demand side, more information is required on the question of cannabis dosage and volumes used by both occasional and regular users. Cannabis is not a uniform drug: the impact of using cannabis of differing potencies and chemical compositions needs to be researched. While issues concerning cannabis have been evaluated many times in the past, it remains a highly adaptable plant and, consequently, a dynamic drug, requiring constant reassessment.

Large deep neural networks for MS lesion segmentation

NASA Astrophysics Data System (ADS)

Prieto, Juan C.; Cavallari, Michele; Palotai, Miklos; Morales Pinzon, Alfredo; Egorova, Svetlana; Styner, Martin; Guttmann, Charles R. G.

2017-02-01

Multiple sclerosis (MS) is a multi-factorial autoimmune disorder, characterized by spatial and temporal dissemination of brain lesions that are visible in T2-weighted and Proton Density (PD) MRI. Assessment of lesion burden and is useful for monitoring the course of the disease, and assessing correlates of clinical outcomes. Although there are established semi-automated methods to measure lesion volume, most of them require human interaction and editing, which are time consuming and limits the ability to analyze large sets of data with high accuracy. The primary objective of this work is to improve existing segmentation algorithms and accelerate the time consuming operation of identifying and validating MS lesions. In this paper, a Deep Neural Network for MS Lesion Segmentation is implemented. The MS lesion samples are extracted from the Partners Comprehensive Longitudinal Investigation of Multiple Sclerosis (CLIMB) study. A set of 900 subjects with T2, PD and a manually corrected label map images were used to train a Deep Neural Network and identify MS lesions. Initial tests using this network achieved a 90% accuracy rate. A secondary goal was to enable this data repository for big data analysis by using this algorithm to segment the remaining cases available in the CLIMB repository.

Grasping the health horizon: toward a virtual, interoperable platform of health innovations.

PubMed

Dawe, Marcus; Dugdale, Paul; Mcgann, Mathew

2015-01-01

The emergence of digital health, wearables, apps, telehealth and the proliferation of health services online are all indications that health is undergoing rapid innovation. Health innovation however has been traditionally slow, high cost and the commercialisation journey was not a guaranteed path to adoption outside the setting where it was developed whether in a hospital, university, clinic or lab. Most significant with this new explosion of health innovations is the sheer volume. The startup revolution, mobile health, personalised heath and globalisation of knowledge means that consumers are demanding innovations and are pulling health innovations through commercialisation with new modes of funding such as crowdsourcing and direct vendor purchases. Our Australian team initiated a project to use machine learning, data mining and classification techniques to bring together and analyse this expansion of heath innovations from all over the world. Following two years of data aggregation and quality analysis we present our findings which are applied to over 200,000 innovations from more than 25,000 organisations. Our findings have identified the dynamics and basis for a marketplace for health innovations that could assist innovators, health practitioners, consumers, investors and other health participants to research, evaluate and promote these innovations.

Development, validation and application of a device to measure e-cigarette users' puffing topography.

PubMed

Cunningham, Anthony; Slayford, Sandra; Vas, Carl; Gee, Jodie; Costigan, Sandra; Prasad, Krishna

2016-10-10

With the rapidly rising popularity and substantial evolution of electronic cigarettes (e-cigarettes) in the past 5-6 years, how these devices are used by vapers and consumers' exposure to aerosol emissions need to be understood. We used puffing topography to measure directly product use. We adapted a cigarette puffing topography device for use with e-cigarettes. We performed validation using air and e-cigarette aerosol under multiple regimes. Consumer puffing topography was measured for 60 vapers provided with rechargeable "cig-a-like" or larger button-activated e-cigarettes, to use ad-libitum in two sessions. Under all regimes, air puff volumes were within 1 mL of the target and aerosol volumes within 5 mL for all device types, serving to validate the device. Vapers' mean puff durations (2.0 s and 2.2 s) were similar with both types of e-cigarette, but mean puff volumes (52.2 mL and 83.0 mL) and mean inter-puff intervals (23.2 s and 29.3 s) differed significantly. The differing data show that product characteristics influence puffing topography and, therefore, the results obtained from a given e-cigarette might not read across to other products. Understanding the factors that affect puffing topography will be important for standardising testing protocols for e-cigarette emissions.

A high-fat diet increases body weight and circulating estradiol concentrations but does not improve bone structural properties in ovariectomized mice.

PubMed

Cao, Jay J; Gregoire, Brian R

2016-04-01

Bone health is influenced by body mass and estrogen. The objective of the study was to determine whether high-fat diet-induced obesity affects bone structure and alters markers of bone turnover in ovariectomized (OVX) mice. We hypothesized that a high-fat diet would increase body weight gain and serum estradiol levels in OVX mice but would not improve bone structural parameter in OVX mice. Thirty-five C57BL/6 mice were either sham operated or OVX at the age of 4 months and then fed either a normal-fat diet (10% energy as fat) or a high-fat diet (45% energy as fat with extra fat from lard) ad libitum for 11 weeks. Ovariectomy increased body weight, serum tartrate-resistant acid phosphatase concentration, and expression of cathepsin K in bone; decreased serum estradiol concentration; and induced significant bone loss manifested by decreased bone volume/total volume (BV/TV), connectivity density (Conn.D), trabecular number, and trabecular thickness with increased trabecular separation and structural model index (P < .01). The high-fat diet increased body weight (P < .01) in OVX mice and nonsignificantly decreased BV/TV (P = .08) and Conn.D (P = .10). Despite having similar serum estradiol concentrations and higher body weight, OVX mice consuming the high-fat diet had lower BV/TV, Conn.D, trabecular number, trabecular thickness, and higher structural model index and trabecular separation than did sham mice fed the normal-fat diet. These findings indicate that increased body weight and elevated serum estradiol concentration induced by a high-fat diet do not mitigate ovariectomy-induced bone loss in mice. Published by Elsevier Inc.

7 CFR 982.57 - Exemptions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... as do not interfere with the volume and quality control objectives of this part, and shall require... handled or used only as authorized. (b) Sales by growers direct to consumers. Any hazelnut grower may sell.... Mail order sales are not exempt sales under this part. [51 FR 29549, Aug. 19, 1986, as amended at 61 FR...

EPIEgram: The Educational Consumers' Newsletter. Volume 17, Numbers 1-9, 1990-1991.

ERIC Educational Resources Information Center

EPIEgram: The Educational Consumers' Newsletter, 1991

1991-01-01

The nine issues of EPIEgram in this collection provide information about educational materials, educational technology, and elementary and secondary educational concerns. The following articles are included: (1) Designer Texts--Macmillan-McGraw To Offer Custom School Books; (2) Children's Lit is Alive and Well; (3) Swear Words, Satanism, and Sex;…

40 CFR 600.002-93 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-07-01

...) The average number of miles traveled by an automobile or group of automobiles per volume of fuel consumed as computed in § 600.113 or § 600.207; or (ii) The equivalent petroleum-based fuel economy for an... vehicles, the term means the equivalent petroleum-based fuel economy value as determined by the calculation...

CHARACTERIZATION OF MERCURY EMISSIONS AT A CHLOR-ALKALI PLANT, VOLUME II. APPENDICES F-J

EPA Science Inventory

The report gives results of a characterization of mercury (Hg) emissions at a chlor-alkali plant. Up to 160 short tons (146 Mg) of Hg is consumed by the chlor-alkali industry each year. Very little quantitative information is currently available however, on the actual Hg losses f...

Students and Their Institutions: A Changing Relationship.

ERIC Educational Resources Information Center

Peltason, J. W., Ed.; Massengale, Marcy V., Ed.

Drawn from papers presented at the sixtieth Annual Meeting of the American Council on Education, this volume represents the collective knowledge and experiences of 26 higher education leaders. Nine areas of concern to higher education are treated in depth: higher education in the future, the cost of a college education, students as consumers,…

Colorimetric Detection of Water Vapor Using Metal-Organic Framework Composites.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Allendorf, Mark D.

Purpose: Water vapor trapped in encapsulation materials or enclosed volumes leads to corrosion issues for critical NW components. Sandia National Laboratories has created a new diagnostic to indicate the presence of water in weapon systems. Impact: Component exposure to water now can be determined instantly, without need for costly, time-consuming analytical methods.

PROJECT SQUID. Field Survey Report. Volume 1, Part 3. Materials

DTIC Science & Technology

1947-06-30

are thought to deserve consideration as to rfrator meals iththoe otaie~l y tit~kl~~lj materials of construction ,titanium, tungsten, tanta- tion of...provide This is a time.consuming costly process with no guar - the n. (, .d data. antee of achieving optimum results. The determina- tion of the

An experiment shows that a well-designed report on costs and quality can help consumers choose high-value health care.

PubMed

Hibbard, Judith H; Greene, Jessica; Sofaer, Shoshanna; Firminger, Kirsten; Hirsh, Judith

2012-03-01

Advocates of health reform continue to pursue policies and tools that will make information about comparative costs and resource use available to consumers. Reformers expect that consumers will use the data to choose high-value providers-those who offer higher quality and lower prices-and thus contribute to the broader goal of controlling national health care spending. However, communicating this information effectively is more challenging than it might first appear. For example, consumers are more interested in the quality of health care than in its cost, and many perceive a low-cost provider to be substandard. In this study of 1,421 employees, we examined how different presentations of information affect the likelihood that consumers will make high-value choices. We found that a substantial minority of the respondents shied away from low-cost providers, and even consumers who pay a larger share of their health care costs themselves were likely to equate high cost with high quality. At the same time, we found that presenting cost data alongside easy-to-interpret quality information and highlighting high-value options improved the likelihood that consumers would choose those options. Reporting strategies that follow such a format will help consumers understand that a doctor who provides higher-quality care than other doctors does not necessarily cost more.

Oxidation of Carbon Fibers in a Cracked Ceramic Matrix Composite Modeled as a Function of Temperature

NASA Technical Reports Server (NTRS)

Halbig, Michael C.; Cawley, James D.; Eckel, Andrew J.

2003-01-01

The oxidation model simulates the oxidation of the reinforcing carbon fibers within a ceramic matrix composite material containing as-fabricated microcracks. The physics-based oxidation model uses theoretically and experimentally determined variables as input for the model. The model simulates the ingress of oxygen through microcracks into a two-dimensional plane within the composite material. Model input includes temperature, oxygen concentration, the reaction rate constant, the diffusion coefficient, and the crack opening width as a function of the mechanical and thermal loads. The model is run in an iterative process for a two-dimensional grid system in which oxygen diffuses through the porous and cracked regions of the material and reacts with carbon in short time steps. The model allows the local oxygen concentrations and carbon volumes from the edge to the interior of the composite to be determined over time. Oxidation damage predicted by the model was compared with that observed from microstructural analysis of experimentally tested composite material to validate the model for two temperatures of interest. When the model is run for low-temperature conditions, the kinetics are reaction controlled. Carbon and oxygen reactions occur relatively slowly. Therefore, oxygen can bypass the carbon near the outer edge and diffuse into the interior so that it saturates the entire composite at relatively high concentrations. The kinetics are limited by the reaction rate between carbon and oxygen. This results in an interior that has high local concentrations of oxygen and a similar amount of consumed carbon throughout the cross section. When the model is run for high-temperature conditions, the kinetics are diffusion controlled. Carbon and oxygen reactions occur very quickly. The carbon consumes oxygen as soon as it is supplied. The kinetics are limited by the relatively slow rate at which oxygen is supplied in comparison to the relatively fast rate at which carbon and oxygen reactions occur. This results in a sharp gradient in oxygen concentration from the edge where it is supplied to the nearest source of carbon, which is where the oxygen is quickly consumed. A moving reaction front is seen in which the outlaying carbon is consumed before the next inner layer of carbon begins to react.

A Novel Low-Power, High-Performance, Zero-Maintenance Closed-Path Trace Gas Eddy Covariance System with No Water Vapor Dilution or Spectroscopic Corrections

NASA Astrophysics Data System (ADS)

Sargent, S.; Somers, J. M.

2015-12-01

Trace-gas eddy covariance flux measurement can be made with open-path or closed-path analyzers. Traditional closed-path trace-gas analyzers use multipass absorption cells that behave as mixing volumes, requiring high sample flow rates to achieve useful frequency response. The high sample flow rate and the need to keep the multipass cell extremely clean dictates the use of a fine-pore filter that may clog quickly. A large-capacity filter cannot be used because it would degrade the EC system frequency response. The high flow rate also requires a powerful vacuum pump, which will typically consume on the order of 1000 W. The analyzer must measure water vapor for spectroscopic and dilution corrections. Open-path analyzers are available for methane, but not for nitrous oxide. The currently available methane analyzers have low power consumption, but are very large. Their large size degrades frequency response and disturbs the air flow near the sonic anemometer. They require significant maintenance to keep the exposed multipass optical surfaces clean. Water vapor measurements for dilution and spectroscopic corrections require a separate water vapor analyzer. A new closed-path eddy covariance system for measuring nitrous oxide or methane fluxes provides an elegant solution. The analyzer (TGA200A, Campbell Scientific, Inc.) uses a thermoelectrically-cooled interband cascade laser. Its small sample-cell volume and unique sample-cell configuration (200 ml, 1.5 m single pass) provide excellent frequency response with a low-power scroll pump (240 W). A new single-tube Nafion® dryer removes most of the water vapor, and attenuates fluctuations in the residual water vapor. Finally, a vortex intake assembly eliminates the need for an intake filter without adding volume that would degrade system frequency response. Laboratory testing shows the system attenuates the water vapor dilution term by more than 99% and achieves a half-power band width of 3.5 Hz.

Repeat, Low Altitude Measurements of Vegetation Status and Biomass Using Manned Aerial and UAS Imagery in a Piñon-Juniper Woodland

NASA Astrophysics Data System (ADS)

Krofcheck, D. J.; Lippitt, C.; Loerch, A.; Litvak, M. E.

2015-12-01

Measuring the above ground biomass of vegetation is a critical component of any ecological monitoring campaign. Traditionally, biomass of vegetation was measured with allometric-based approach. However, it is also time-consuming, labor-intensive, and extremely expensive to conduct over large scales and consequently is cost-prohibitive at the landscape scale. Furthermore, in semi-arid ecosystems characterized by vegetation with inconsistent growth morphologies (e.g., piñon-juniper woodlands), even ground-based conventional allometric approaches are often challenging to execute consistently across individuals and through time, increasing the difficulty of the required measurements and consequently the accuracy of the resulting products. To constrain the uncertainty associated with these campaigns, and to expand the extent of our measurement capability, we made repeat measurements of vegetation biomass in a semi-arid piñon-juniper woodland using structure-from-motion (SfM) techniques. We used high-spatial resolution overlapping aerial images and high-accuracy ground control points collected from both manned aircraft and multi-rotor UAS platforms, to generate digital surface model (DSM) for our experimental region. We extracted high-precision canopy volumes from the DSM and compared these to the vegetation allometric data, s to generate high precision canopy volume models. We used these models to predict the drivers of allometric equations for Pinus edulis and Juniperous monosperma (canopy height, diameter at breast height, and root collar diameter). Using this approach, we successfully accounted for the carbon stocks in standing live and standing dead vegetation across a 9 ha region, which contained 12.6 Mg / ha of standing dead biomass, with good agreement to our field plots. Here we present the initial results from an object oriented workflow which aims to automate the biomass estimation process of tree crown delineation and volume calculation, and partition standing biomass into live and dead pools, in a change detection context.

MEMS device for mass market gas and chemical sensors

NASA Astrophysics Data System (ADS)

Kinkade, Brian R.; Daly, James T.; Johnson, Edward A.

2000-08-01

Gas and chemical sensors are used in many applications. Industrial health and safety monitors allow companies to meet OSHA requirements by detecting harmful levels of toxic or combustible gases. Vehicle emissions are tested during annual inspections. Blood alcohol breathalizers are used by law enforcement. Refrigerant leak detection ensures that the Earth's ozone layer is not being compromised. Industrial combustion emissions are also monitored to minimize pollution. Heating and ventilation systems watch for high levels of carbon dioxide (CO2) to trigger an increase in fresh air exchange. Carbon monoxide detectors are used in homes to prevent poisoning from poor combustion ventilation. Anesthesia gases are monitored during a patients operation. The current economic reality is that two groups of gas sensor technologies are competing in two distinct existing market segments - affordable (less reliable) chemical reaction sensors for consumer markets and reliable (expensive) infrared (IR) spectroscopic sensors for industrial, laboratory, and medical instrumentation markets. Presently high volume mass-market applications are limited to CO detectros and on-board automotive emissions sensors. Due to reliability problems with electrochemical sensor-based CO detectors there is a hesitancy to apply these sensors in other high volume applications. Applications such as: natural gas leak detection, non-invasive blood glucose monitoring, home indoor air quality, personal/portable air quality monitors, home fire/burnt cooking detector, and home food spoilage detectors need a sensor that is a small, efficient, accurate, sensitive, reliable, and inexpensive. Connecting an array of these next generation gas sensors to wireless networks that are starting to proliferate today creates many other applications. Asthmatics could preview the air quality of their destinations as they venture out into the day. HVAC systems could determine if fresh air intake was actually better than the air in the house. Internet grocery delivery services could check for spoiled foods in their clients' refrigerators. City emissions regulators could monitor the various emissions sources throughout the area from their desk to predict how many pollution vouchers they will need to trade in the next week. We describe a new component architecture for mass-market sensors based on silicon microelectromechanical systems (MEMS) technology. MEMS are micrometer-scale devices that can be fabricated as discrete devices or large arrays, using the technology of integrated circuit manufacturing. These new photonic bandgap and MEMS fabricataion technologies will simplify the component technology to provide high-quality gas and chemical sensors at consumer prices.

Effect of mineral and organic fertilization on grey water footprint in a fertirrigated crop under semiarid conditions.

NASA Astrophysics Data System (ADS)

Castellanos Serrano, María Teresa; Requejo Mariscal, María Isabel; Cartagena Causapé, María Carmen; Arce Martínez, Augusto; Ribas Elcorobarrutia, Francisco; Jesús Cabello Cabello, María; María Tarquis Alfonso, Ana

2016-04-01

The concept of "water footprint" (WF) was introduced as an indicator for the total volume of direct and indirect freshwater used, consumed and/or polluted [1]. The WF distinguishes between blue water (volume of surface and groundwater consumed), green water (rain-water consumed), and grey water (volume of freshwater that is required to assimilate the load of pollutants based on existing ambient water quality standards). In semiarid scenarios with low water quality, where the irrigation is necessary to maintain production, green WF is zero because the effective rainfall is negligible. As well as blue WF includes: i) extra consumption or irrigation water that the farmer has to apply to compensate the fail of uniformity on discharge of drips, ii) percolation out of control or salts leaching, which depends on the salt tolerance of the crop, soil and quality of irrigation water, to ensure the fruit yield. The major concern is grey WF, because the irrigation and nitrogen dose have to be adjusted to the crop needs in order to minimize nitrate pollution. This study is focused in assessment mineral and organic fertilization on grey WF in a fertirrigated melon crop under semiarid conditions, which is principally cultivated in the centre of Spain declared vulnerable zone to nitrate pollution by applying the Directive 91/676/CEE. During successive years, a melon crop (Cucumis melo L.) was grown under field conditions. Different doses of ammonium nitrate were used as well as compost derived from the wine-distillery industry which is relevant in this area. Acknowledgements: This project has been supported by INIA-RTA04-111-C3 and INIA-RTA2010-00110-C03. Keywords: Water footprint, nitrogen, fertirrigation, inorganic fertilizers, organic amendments, semiarid conditions. [1] Hoekstra, A.Y. 2003. Virtual water trade. Proceedings of the International Expert Meeting on Virtual Water Trade, Delft, The Netherlands, 12-13 December 2002. Value of Water Research Report Series No. 12, UNESCO-IHE, Delft, The Netherlands.

Application of water footprint in a fertirrigated melon crop under semiarid conditions: A review.

NASA Astrophysics Data System (ADS)

Castellanos Serrano, María Teresa; Requejo Mariscal, María Isabel; Villena Gordo, Raquel; Cartagena Causapé, María Carmen; Arce Martínez, Augusto; Ribas Elcorobarrutia, Francisco; Jesús Cabello Cabello, María; María Tarquis Alfonso, Ana

2015-04-01

In recent times, there has been a major increase in the use of water and fertilizers in order to increase agricultural production, while at the same time there has increased evidence that aquifers are reducing their water level, enriched by nutrient and degraded as a result of pollution. So best management practices are needed for much of cropped, irrigated and fertirrigated land, to avoid contamination of fresh water and groundwater. The concept of "water footprint" (WF) was introduced as an indicator for the total volume of direct and indirect freshwater used, consumed and/or polluted [1]. The WF distinguishes between blue water (volume of surface and groundwater consumed), green water (rain-water consumed), and grey water (volume of freshwater that is required to assimilate the load of pollutants based on existing ambient water quality standards). This study is focused in calculating the crops WF using a real case of study in a fertirrigated melon crop under semiarid conditions which is principally cultivated in the centre of Spain declared vulnerable zone to nitrate pollution by applying the Directive 91/676/CEE. During successive years, a melon crop (Cucumis melo L.) was grown under field conditions applying mineral and organic fertilizers. Different doses of ammonium nitrate were used as well as compost derived from the wine-distillery industry which is relevant in this area. This application help us to review the different concepts in which is based WF. Acknowledgements: This project has been supported by INIA-RTA04-111-C3 and INIA-RTA2010-00110-C03-01. Keywords: Water footprint, nitrogen, fertirrigation, inorganic fertilizers, organic amendments, winery waste, semiarid conditions. [1] Hoekstra, A.Y. 2003. Virtual water trade. Proceedings of the International Expert Meeting on Virtual Water Trade, Delft, The Netherlands, 12-13 December 2002. Value of Water Research Report Series No. 12, UNESCO-IHE, Delft, The Netherlands.

Relation between milk-fat percentage, vitamin D, and BMI z score in early childhood.

PubMed

Vanderhout, Shelley M; Birken, Catherine S; Parkin, Patricia C; Lebovic, Gerald; Chen, Yang; O'Connor, Deborah L; Maguire, Jonathon L

2016-12-01

Fortified cow milk is a material contributor of vitamin D and dietary fat in children. Recommendations for children >2 y of age advise reduced milk-fat consumption to reduce childhood obesity, yet the relation between lower milk fat, vitamin D stores, and body mass index (BMI) is unclear. The primary objective was to explore the association between milk-fat percentage and both BMI z score (zBMI) and venous 25-hydroxyvitamin D [25(OH)D]; the secondary objective was to assess whether milk volume consumed modified this relation. This was a cross-sectional analysis. Healthy urban children aged 12-72 mo were recruited from 9 primary health care practices within The Applied Research Group for Kids (TARGet Kids!) research group in Toronto, Canada. We used adjusted bivariate linear regression to examine the relation between milk-fat percentage and child 25(OH)D and zBMI concurrently. Effect modification by milk volume consumed on the evaluated relations was explored with the use of an interaction term in the statistical model. Among the 2745 included children there was a positive association between milk-fat percentage and 25(OH)D (P = 0.006) and a negative association between milk-fat percentage and zBMI (P < 0.0001). Participants who drank whole milk had a 5.4-nmol/L (95% CI: 4.32, 6.54) higher median 25(OH)D concentration and a 0.72 lower (95% CI: 0.68, 0.76) zBMI score than children who drank 1% milk. Milk volume consumed modified the effect of milk-fat percentage on 25(OH)D (P = 0.003) but not on zBMI (P = 0.77). Whole milk consumption among healthy young children was associated with higher vitamin D stores and lower BMI. Longitudinal and interventional studies are needed to confirm these findings. TARGet Kids! was registered at clinicaltrials.gov as NCT01869530. © 2016 American Society for Nutrition.

Effects of rehydration fluid temperature and composition on body weight retention upon voluntary drinking following exercise-induced dehydration

PubMed Central

Bae, Yoon Jung; Lee, Yong Soo; Kim, Byeong Jo

2012-01-01

The purpose of this study was to determine the effects of beverage temperature and composition on weight retention and fluid balance upon voluntary drinking following exercise induced-dehydration. Eight men who were not acclimated to heat participated in four randomly ordered testing sessions. In each session, the subjects ran on a treadmill in a chamber maintained at 37℃ without being supplied fluids until 2% body weight reduction was reached. After termination of exercise, they recovered for 90 min under ambient air conditions and received one of the following four test beverages: 10℃ water (10W), 10℃ sports drink (10S), 26℃ water (26W), and 26℃ sports drink (26S). They consumed the beverages ad libitum. The volume of beverage consumed and body weight were measured at 30, 60, and 90 min post-recovery. Blood samples were taken before and immediately after exercise as well as at the end of recovery in order to measure plasma parameters and electrolyte concentrations. We found that mean body weight decreased by 1.8-2.0% following exercise. No differences in mean arterial pressure, plasma volume, plasma osmolality, and blood electrolytes were observed among the conditions. Total beverage volumes consumed were 1,164 ± 388, 1,505 ± 614, 948 ± 297, and 1,239 ± 401 ml for 10W, 10S, 26W, and 26S respectively (P > 0.05). Weight retention at the end of recovery from dehydration was highest in 10S (1.3 ± 0.7 kg) compared to 10W (0.4 ± 0.5 kg), 26W (0.4 ± 0.4 kg), and (0.6 ± 0.4 kg) (P < 0.005). Based on these results, carbohydrate/electrolyte-containing beverages at cool temperature were the most favorable for consumption and weight retention compared to plain water and moderate temperature beverages. PMID:22586501

Effect of a carbohydrate-electrolyte beverage, lemon tea, or water on rehydration during short-term recovery from exercise.

PubMed

Wong, Stephen Heung-Sang; Chen, Yajun

2011-08-01

This study examined the rehydration achieved by drinking different beverages during a short-term recovery period (REC) after exercise-induced dehydration. Thirteen well-trained men (age 22.1 ± 3.3 yr, body mass 61.2 ± 9.1 kg, VO(2max) 64.9 ± 4.0 ml · kg-1 · min-1, maximum heart rate 198 ± 7 beats/min) ran for 60 min on 3 occasions on a level treadmill at 70% VO(2max). All trials were performed in thermoneutral conditions (21 °C, 71% relative humidity) and were separated by at least 7 d. During 4 hr REC, the subjects consumed either a volume of a carbohydrate-electrolyte beverage (CE), lemon tea (LT), or distilled water (DW) equal to 150% of the body weight (BW) lost during the previous run. The fluid was consumed in 6 equal volumes at 30, 60, 90, 120, 150, and 180 min of REC. After the completion of the 60-min run, the subjects lost ~2.0% of their preexercise BW in all trials, and no differences were observed in these BW changes between trials. At the end of REC, the greatest fraction of the retained drink occurred when the CE drink was consumed (CE vs. LT vs. DW: 52% ± 18% vs. 36% ± 15% vs. 30% ± 14%, p < .05). The CE drink also caused the least diuretic effect (CE vs. LT vs. DW: 638 ± 259 vs. 921 ± 323 vs. 915 ± 210 ml, p < .05) and produced the optimal restoration of plasma volume (CE vs. LT vs. DW: 11.2% ± 2.0% vs. -3.1% ± 1.8% vs. 0.2% ± 2.1%, p < .05). The results of this study suggest that CE drinks are more effective than DW or LT in restoring fluid balance during short-term REC after exercise-induced dehydration.

Biologically inspired highly efficient buoyancy engine

NASA Astrophysics Data System (ADS)

Akle, Barbar; Habchi, Wassim; Abdelnour, Rita; Blottman, John, III; Leo, Donald

2012-04-01

Undersea distributed networked sensor systems require a miniaturization of platforms and a means of both spatial and temporal persistence. One aspect of this system is the necessity to modulate sensor depth for optimal positioning and station-keeping. Current approaches involve pneumatic bladders or electrolysis; both require mechanical subsystems and consume significant power. These are not suitable for the miniaturization of sensor platforms. Presented in this study is a novel biologically inspired method that relies on ionic motion and osmotic pressures to displace a volume of water from the ocean into and out of the proposed buoyancy engine. At a constant device volume, the displaced water will alter buoyancy leading to either sinking or floating. The engine is composed of an enclosure sided on the ocean's end by a Nafion ionomer and by a flexible membrane separating the water from a gas enclosure. Two electrodes are placed one inside the enclosure and the other attached to the engine on the outside. The semi-permeable membrane Nafion allows water motion in and out of the enclosure while blocking anions from being transferred. The two electrodes generate local concentration changes of ions upon the application of an electrical field; these changes lead to osmotic pressures and hence the transfer of water through the semi-permeable membrane. Some aquatic organisms such as pelagic crustacean perform this buoyancy control using an exchange of ions through their tissue to modulate its density relative to the ambient sea water. In this paper, the authors provide an experimental proof of concept of this buoyancy engine. The efficiency of changing the engine's buoyancy is calculated and optimized as a function of electrode surface area. For example electrodes made of a 3mm diameter Ag/AgCl proved to transfer approximately 4mm3 of water consuming 4 Joules of electrical energy. The speed of displacement is optimized as a function of the surface area of the Nafion membrane and its thickness. The 4mm3 displaced volume obtained with the Ag/AgCl electrodes required approximately 380 seconds. The thickness of the Nafion membrane is 180μm and it has an area of 133mm3.

Building Bigger, Better Instruments with Dry Cryostats

NASA Technical Reports Server (NTRS)

Benford, Dominic J.; Voellmer, George

2010-01-01

The cylindrical instrument volume allowable n SOFIA is large, comprising perhaps 400 liters at 4K. However, the cryogen accommodation to enable this environment consumes roughly 20% of the volume, and worsens rues, airworthiness/safety, and handling/operation, Present-day pulse tube coolers have negligible cold volumes, provide adequate cooling powers, and reach colder temperatures than stored cryogen. In addition, they permit safer, more reliable, lower maintenance instrument operation. While the advantages of dry cryostats are well-known and commonly used in labs and ground-based astronomical facilities, SOFIA would require some charges in accommodations to permit a pulse tube cooler to operate on board, Whil e these changes are not negligible, we present our investigation into the feasibility and desirability of making SOFIA a dry cryostat-capable observatory

Quantification of osteolytic bone lesions in a preclinical rat trial

NASA Astrophysics Data System (ADS)

Fränzle, Andrea; Bretschi, Maren; Bäuerle, Tobias; Giske, Kristina; Hillengass, Jens; Bendl, Rolf

2013-10-01

In breast cancer, most of the patients who died, have developed bone metastasis as disease progression. Bone metastases in case of breast cancer are mainly bone destructive (osteolytic). To understand pathogenesis and to analyse response to different treatments, animal models, in our case rats, are examined. For assessment of treatment response to bone remodelling therapies exact segmentations of osteolytic lesions are needed. Manual segmentations are not only time-consuming but lack in reproducibility. Computerized segmentation tools are essential. In this paper we present an approach for the computerized quantification of osteolytic lesion volumes using a comparison to a healthy reference model. The presented qualitative and quantitative evaluation of the reconstructed bone volumes show, that the automatically segmented lesion volumes complete missing bone in a reasonable way.

Direct-to-consumer (DTC) antidepressant advertising and consumer misperceptions about the chemical imbalance theory of depression: the moderating role of skepticism.

PubMed

Park, Jin Seong; Ahn, Ho-Young Anthony

2013-01-01

Based on a survey with members of an online consumer panel (N= 699), this study revealed that: (a) a substantial percentage of consumers held misperceptions about the chemical imbalance theory of depression; (b) personal and interpersonal experiences with depression positively related to such misperceptions; (c) overall, exposure to direct-to-consumer (DTC) antidepressant advertising did not significantly relate to misperceptions; and (d) DTC exposure magnified misperceptions when consumers were highly trustful of DTC advertising, whereas exposure diluted misperceptions when consumers were highly skeptical. Theoretical and practical implications of the research are discussed, especially in light of the social responsibility of DTC advertising.

Attitudes of consumers and live-poultry workers to central slaughtering in controlling H7N9: a cross-sectional study.

PubMed

Lin, Xiao; Zhang, Dingmei; Wang, Xinwei; Huang, Yun; Du, Zhicheng; Zou, Yaming; Lu, Jiahai; Hao, Yuantao

2017-05-26

Guangdong Province in the Pearl River Delta of Southeast China is among the areas in the country with the highest rates of avian flu cases. In order to control the outbreak of human-infected H7N9 cases, Guangdong launched a new policy on the central slaughtering of live poultry in 2015. This study aims to evaluate attitudes of consumers and live-poultry workers toward the policy. The live-poultry workers consisted of two sub-groups: live-poultry traders and poultry farm workers. Consumers and live-poultry workers from Guangdong were enrolled by stratified multi-stage random sampling. Online and field surveys were conducted to investigate participants' attitudes on policy implementation. Questionnaires were developed to quantify participant demographics, to collect information about attitudes toward the policy, and to identify influential factors of policy acceptability. Proportional odds logistics regression was used in the univariate and multivariate analyses. A total of 1449 consumers, 181 live-poultry traders, and 114 poultry farm workers completed the study. Policy acceptability percentages among consumers, live-poultry traders, and poultry farm workers were 57.1, 37.9, and 62.6%, respectively. Logistics regression shows that consumers tended not to support the policy if they were males, if they were concerned with the food safety of chilled products, and if they preferred purchasing live poultry. Live-poultry traders tended not to support if they were subsidized by the government, if they were males, if they experienced a drop in trading volume, and if they were unclear whether avian flu was a preventable disease. Finally, poultry farm workers tended not to support if they experienced a drop in trading volume, if they operated a poultry farm on a small to medium scale, and if they experienced inconvenience in their work due to the policy. The study reveals a substantial refusal or slowness to accept the policy. Failure to accept the policy results from varying reasons. Among consumers, concern about food safety and dietary preference are two major causes of disapproval. Policy acceptability among live-poultry workers diverges within the two sub-groups. While a large percentage of poultry farm workers accept the policy, the drop in trading and an insufficient subsidy hamper acceptance by live-poultry traders. We recommend that policy-makers promote health education and alleviate the policy impact on trading with a reformed subsidy policy to increase acceptability. These findings are crucial for the prevention of human-infected H7N9 cases in Guangdong.

Decreased Central Nervous System Grey Matter Volume (GMV) in Smokers Affects Cognitive Abilities: A Systematic Review.

PubMed

Vňuková, Martina; Ptáček, Radek; Raboch, Jiří; Stefano, George B

2017-04-20

Although cigarette smoking is a leading cause of preventable mortality, tobacco is consumed by approximately 22% of the adult population worldwide. Smoking is also a risk factor for cardiovascular disease, affects brain processing, and is a recognized risk factor for Alzheimer disease (AD). Tobacco toxins (e.g., nicotine at high levels) inhaled in smoke may cause disorders resulting in preclinical brain changes. Researchers suggest that there are differences in brain volume between smokers and non-smokers. This review examines these differences in brain grey matter volume (GMV). In March/April 2015, MedLine, Embase, and PsycINFO were searched using the terms: "grey matter" AND "voxel-based" AND "smoking" AND "cigarette". The 4 studies analyzed found brain GMV decreases in smokers compared to non-smokers. Furthermore, sex-specific differences were found; while the thalamus and cerebellum were affected in both sexes, decreased GMV in the olfactory gyrus was found only in male smokers. Age-group differences were also found, and these may suggest pre-existing abnormalities that lead to nicotine dependence in younger individuals. Only 1 study found a positive correlation between number of pack-years smoked and GMV. Smoking decreases GMV in most brain areas. This decrease may be responsible for the cognitive impairment and difficulties with emotional regulation found in smokers compared with non-smokers.

Decreased Central Nervous System Grey Matter Volume (GMV) in Smokers Affects Cognitive Abilities: A Systematic Review

PubMed Central

Vňuková, Martina; Ptáček, Radek; Raboch, Jiří; Stefano, George B.

2017-01-01

Although cigarette smoking is a leading cause of preventable mortality, tobacco is consumed by approximately 22% of the adult population worldwide. Smoking is also a risk factor for cardiovascular disease, affects brain processing, and is a recognized risk factor for Alzheimer disease (AD). Tobacco toxins (e.g., nicotine at high levels) inhaled in smoke may cause disorders resulting in preclinical brain changes. Researchers suggest that there are differences in brain volume between smokers and non-smokers. This review examines these differences in brain grey matter volume (GMV). In March/April 2015, MedLine, Embase, and PsycINFO were searched using the terms: “grey matter” AND “voxel-based” AND “smoking” AND “cigarette”. The 4 studies analyzed found brain GMV decreases in smokers compared to non-smokers. Furthermore, sex-specific differences were found; while the thalamus and cerebellum were affected in both sexes, decreased GMV in the olfactory gyrus was found only in male smokers. Age-group differences were also found, and these may suggest pre-existing abnormalities that lead to nicotine dependence in younger individuals. Only 1 study found a positive correlation between number of pack-years smoked and GMV. Smoking decreases GMV in most brain areas. This decrease may be responsible for the cognitive impairment and difficulties with emotional regulation found in smokers compared with non-smokers. PMID:28426638

Automatic 3D liver location and segmentation via convolutional neural network and graph cut.

PubMed

Lu, Fang; Wu, Fa; Hu, Peijun; Peng, Zhiyi; Kong, Dexing

2017-02-01

Segmentation of the liver from abdominal computed tomography (CT) images is an essential step in some computer-assisted clinical interventions, such as surgery planning for living donor liver transplant, radiotherapy and volume measurement. In this work, we develop a deep learning algorithm with graph cut refinement to automatically segment the liver in CT scans. The proposed method consists of two main steps: (i) simultaneously liver detection and probabilistic segmentation using 3D convolutional neural network; (ii) accuracy refinement of the initial segmentation with graph cut and the previously learned probability map. The proposed approach was validated on forty CT volumes taken from two public databases MICCAI-Sliver07 and 3Dircadb1. For the MICCAI-Sliver07 test dataset, the calculated mean ratios of volumetric overlap error (VOE), relative volume difference (RVD), average symmetric surface distance (ASD), root-mean-square symmetric surface distance (RMSD) and maximum symmetric surface distance (MSD) are 5.9, 2.7 %, 0.91, 1.88 and 18.94 mm, respectively. For the 3Dircadb1 dataset, the calculated mean ratios of VOE, RVD, ASD, RMSD and MSD are 9.36, 0.97 %, 1.89, 4.15 and 33.14 mm, respectively. The proposed method is fully automatic without any user interaction. Quantitative results reveal that the proposed approach is efficient and accurate for hepatic volume estimation in a clinical setup. The high correlation between the automatic and manual references shows that the proposed method can be good enough to replace the time-consuming and nonreproducible manual segmentation method.

Spatial Distribution of Oak Mistletoe as It Relates to Habits of Oak Woodland Frugivores

PubMed Central

Wilson, Ethan A.; Sullivan, Patrick J.; Dickinson, Janis L.

2014-01-01

This study addresses the underlying spatial distribution of oak mistletoe, Phoradendron villosum, a hemi-parasitic plant that provides a continuous supply of berries for frugivorous birds overwintering the oak savanna habitat of California's outer coast range. As the winter community of birds consuming oak mistletoe varies from group-living territorial species to birds that roam in flocks, we asked if mistletoe volume was spatially autocorrelated at the scale of persistent territories or whether the patterns predicted by long-term territory use by western bluebirds are overcome by seed dispersal by more mobile bird species. The abundance of mistletoe was mapped on trees within a 700 ha study site in Carmel Valley, California. Spatial autocorrelation of mistletoe volume was analyzed using the variogram method and spatial distribution of oak mistletoe trees was analyzed using Ripley's K and O-ring statistics. On a separate set of 45 trees, mistletoe volume was highly correlated with the volume of female, fruit-bearing plants, indicating that overall mistletoe volume is a good predictor of fruit availability. Variogram analysis showed that mistletoe volume was spatially autocorrelated up to approximately 250 m, a distance consistent with persistent territoriality of western bluebirds and philopatry of sons, which often breed next door to their parents and are more likely to remain home when their parents have abundant mistletoe. Using Ripley's K and O-ring analyses, we showed that mistletoe trees were aggregated for distances up to 558 m, but for distances between 558 to 724 m the O-ring analysis deviated from Ripley's K in showing repulsion rather than aggregation. While trees with mistletoe were aggregated at larger distances, mistletoe was spatially correlated at a smaller distance, consistent with what is expected based on persistent group territoriality of western bluebirds in winter and the extreme philopatry of their sons. PMID:25389971

Effect of bread gluten content on gastrointestinal function: a crossover MRI study on healthy humans.

PubMed

Coletta, Marina; Gates, Fred K; Marciani, Luca; Shiwani, Henna; Major, Giles; Hoad, Caroline L; Chaddock, Gemma; Gowland, Penny A; Spiller, Robin C

2016-01-14

Gluten is a crucial functional component of bread, but the effect of increasing gluten content on gastrointestinal (GI) function remains uncertain. Our aim was to investigate the effect of increasing gluten content on GI function and symptoms in healthy participants using the unique capabilities of MRI. A total of twelve healthy participants completed this randomised, mechanistic, open-label, three-way crossover study. On days 1 and 2 they consumed either gluten-free bread (GFB), or normal gluten content bread (NGCB) or added gluten content bread (AGCB). The same bread was consumed on day 3, and MRI scans were performed every 60 min from fasting baseline up to 360 min after eating. The appearance of the gastric chime in the images was assessed using a visual heterogeneity score. Gastric volumes, the small bowel water content (SBWC), colonic volumes and colonic gas content and GI symptoms were measured. Fasting transverse colonic volume after the 2-d preload was significantly higher after GFB compared with NGCB and AGCB with a dose-dependent response (289 (SEM 96) v. 212 (SEM 74) v. 179 (SEM 87) ml, respectively; P=0·02). The intragastric chyme heterogeneity score was higher for the bread with increased gluten (AGCB 6 (interquartile range (IQR) 0·5) compared with GFB 3 (IQR 0·5); P=0·003). However, gastric half-emptying time was not different between breads nor were study day GI symptoms, postprandial SBWC, colonic volume and gas content. This MRI study showed novel mechanistic insights in the GI responses to different breads, which are poorly understood notwithstanding the importance of this staple food.

Sugar-Sweetened Beverage Consumption Is Associated With Change of Visceral Adipose Tissue Over 6 Years of Follow-Up.

PubMed

Ma, Jiantao; McKeown, Nicola M; Hwang, Shih-Jen; Hoffmann, Udo; Jacques, Paul F; Fox, Caroline S

2016-01-26

Sugar-sweetened beverage (SSB) intake has been linked to abnormal abdominal adipose tissue. We examined the prospective association of habitual SSB intake and change in visceral adipose tissue (VAT) and subcutaneous adipose tissue. The quantity (volume, cm(3)) and quality (attenuation, Hounsfield Unit) of abdominal adipose tissue were measured using computed tomography in 1003 participants (mean age 45.3 years, 45.0% women) at examination 1 and 2 in the Framingham's Third Generation cohort. The 2 exams were ≈ 6 years apart. At baseline, SSB and diet soda intake were assessed using a valid food frequency questionnaire. Participants were categorized into 4 groups: none to <1 serving/mo (nonconsumers), 1 serving/mo to <1 serving/week, 1 serving/week to 1 serving/d, and ≥ 1 serving/d (daily consumers) of either SSB or diet soda. After adjustment for multiple confounders including change in body weight, higher SSB intake was associated with greater change in VAT volume (P trend<0.001). VAT volume increased by 658 cm(3) (95% confidence interval [CI], 602 to 713), 649 cm(3) (95% CI, 582 to 716), 707 cm(3) (95% CI, 657 to 757), and 852 cm(3) (95% CI, 760 to 943) from nonconsumers to daily consumers. Higher SSB intake was also associated with greater decline of VAT attenuation (P trend=0.007); however, the association became nonsignificant after additional adjustment for VAT volume change. In contrast, diet soda consumption was not associated with change in abdominal adipose tissue. Regular SSB intake was associated with adverse change in both VAT quality and quantity, whereas we observed no such association for diet soda. © 2016 American Heart Association, Inc.

Understanding trends in Australian alcohol consumption-an age-period-cohort model.

PubMed

Livingston, Michael; Raninen, Jonas; Slade, Tim; Swift, Wendy; Lloyd, Belinda; Dietze, Paul

2016-09-01

To decompose Australian trends in alcohol consumption into their age, period (survey year) and cohort (birth year/generation) components. In particular, we aimed to test whether recent declines in overall consumption have been influenced by reductions in drinking among recently born cohorts. Seven cross-sectional waves of the Australian National Drug Strategy Household Survey (1995-2013). Age, period and cohort effects were estimated using a linear and logistic cross-classified random-effects models (CCREMs). Australia A total of 124 440 Australians (69 193 females and 55 257 males), aged 14-79 years. Whether or not respondents consumed alcohol in the 12 months prior to the survey and, for those who did, the estimated volume of pure alcohol consumed, derived using standard quantity-frequency survey questions. Controlling for age and period effects, there was significant variation in drinking participation and drinking volume by birth cohort. In particular, male cohorts born between the 1965 and 1974 and female cohorts born between 1955 and 1974 reported higher rates of drinking participation (P < 0.05), while the most recent cohorts (born in the 1990s) had lower rates of participation (P < 0.01). Among drinkers, the most recently born cohort also had sharply lower average consumption volumes than older cohorts for both men and women (P < 0.01). Recent birth cohorts (born between 1995 and 1999) in Australia report significantly lower rates of both drinking participation and drinking volume than previous cohorts, controlling for their age distribution and overall changes in population drinking. These findings suggest that the recent decline in alcohol consumption in Australia has been driven by declines in drinking among these recently born cohorts. These trends are consistent with international shifts in youth drinking. © 2016 Society for the Study of Addiction.

Low-volume versus high-volume initiated trans-anal irrigation therapy in adults with chronic constipation: study protocol for a randomised controlled trial.

PubMed

Emmett, Christopher; Close, Helen; Mason, James; Taheri, Shiva; Stevens, Natasha; Eldridge, Sandra; Norton, Christine; Knowles, Charles; Yiannakou, Yan

2017-03-31

Constipation is common in adults and up to 20% of the population report this symptom. Chronic constipation (CC), usually defined as more than 6 months of symptoms, is less common but results in 0.5 million UK GP consultations per annum. The effect of symptoms on measured quality of life (QOL) is significant, and CC consumes significant health care resources. In the UK, it is estimated that 10% of district nursing time is spent on constipation. Trans-anal irrigation therapy has become a widely used treatment despite a lack of robust efficacy data to support its use. The long-term outcome of treatment is also unclear. A randomised comparison of two different methods of irrigation (high- and low-volume) will provide valuable evidence of superiority of one system over the other, as well as providing efficacy data for the treatment as a whole. Participants will be recruited based on predetermined eligibility criteria. Following informed consent, they will be randomised to either high-volume (HV) or low-volume (LV) irrigation and undergo standardised radiological and physiological investigations. Following training, they will commence home irrigation with the allocated device. Data will be collected at 1, 3, 6 and 12 months according to a standardised outcomes framework. The primary outcome is PAC-QOL, measured at 3 months. The study is powered to detect a 10% difference in outcome between systems at 3 months; this means that 300 patients will need to be recruited. This study will be the first randomised comparison of two different methods of trans-anal irrigation. It will also be the largest prospective study of CC patients treated with irrigation. It will provide evidence for the effectiveness of irrigation in the treatment of CC, as well as the comparative effectiveness of the two methods. This will enable more cost-effective and evidence-based use of irrigation. Also, the results will be combined with the other studies in the CapaCiTY programme to generate an evidence-based treatment algorithm for CC in adults. ISRCTN, identifier: ISRCTN11093872 . Registered on 11 November 2015. Trial not retrospectively registered. Protocol version 3 (22 January 2016).

Synthetic polymers blend used in the production of high activated carbon for pesticides removals from liquid phase.

PubMed

Belo, Cristóvão Ramiro; Cansado, Isabel Pestana da Paixão; Mourão, Paulo Alexandre Mira

2017-02-01

For the activated carbon (AC) production, we used the most common industrial and consumer solid waste, namely polyethyleneterephthalate (PET), alone or blended with other synthetic polymer such polyacrylonitrile (PAN). By mixing PET, with PAN, an improvement in the yield of the AC production was found and the basic character and some textural and chemical properties were enhanced. The PET-PAN mixture was subjected to carbonisation, with a pyrolysis yield of 31.9%, between that obtained with PET (16.9%) or PAN (42.6%) separately. The AC revealed a high surface area (1400, 1230 and 1117 m 2  g -1 ) and pore volume (0.46, 0.56 and 0.50 cm 3  g -1 ), respectively, for PET, PAN and PET-PAN precursors. Selected ACs were successfully tested for 4-chloro-2-methylphenoxyacetic acid (MCPA) and diuron removal from the liquid phase, showing a higher adsorption capacity (1.7 and 1.2 mmol g -1 , respectively, for MCPA and diuron) and good fits with the Langmuir (PET) and Freundlich equation (PAN and PET-PAN blend). With MCPA, the controlling factor to the adsorption capacity was the porous volume and the average pore size. Concerning diuron, the adsorption was controlled essentially by the external diffusion. A remarkable result is the use of different synthetic polymers wastes, as precursors for the production of carbon materials, with high potential application on the pesticides removals from the liquid phase.

Implementing a low-starch biscuit-free diet in zoo gorillas: the impact on behavior.

PubMed

Less, E H; Bergl, R; Ball, R; Dennis, P M; Kuhar, C W; Lavin, S R; Raghanti, M A; Wensvoort, J; Willis, M A; Lukas, K E

2014-01-01

In the wild, western lowland gorillas travel long distances while foraging and consume a diet high in fiber and low in caloric density. In contrast, gorillas in zoos typically consume a diet that is low in fiber and calorically dense. Some items commonly used in captive gorilla diets contain high levels of starch and sugars, which are present at low levels in the natural diet of gorillas. Diet items high in simple carbohydrates are associated with obesity and heart disease in humans. Typical captive gorilla diets may also encourage undesirable behaviors. In response to these issues, we tested the behavioral impact of a diet that was biscuit-free, had low caloric density, and which was higher in volume at five institutions. We hypothesized that this diet change would reduce abnormal behaviors such as regurgitation and reingestion (R/R), decrease time spent inactive, and increase time spent feeding. The biscuit-free diet significantly reduced (and in the case of one zoo eliminated) R/R and may have reduced hair-plucking behavior. However, an increase in coprophagy was observed in many individuals following the diet change. The experimental diet caused a general increase in time the gorillas spent feeding, but this increase did not occur across all institutions and varied by individual. Interestingly, the overall time gorillas spent inactive actually increased with this diet change. Future research will examine these behavioral changes in a greater number of individuals to determine if the results remain consistent with these preliminary findings. Additionally, future research will examine the physiological impact of this diet change. © 2014 Wiley Periodicals, Inc.

AMTEC: Current status and vision

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, G.C.; Hunt, T.K.; Sievers, R.K.

1997-12-31

The recent history of alkali metal thermal-to-electric conversion (AMTEC) has been tantalizing as technical advances have struck down most of the remaining barriers for realization of practical applications. AMTEC has always offered promise with its inherently noise-free, vibration-free, and high efficiency operation. Today`s AMTEC cells are also compact, lightweight and reliable, achieving near 20% conversion efficiency. Pathways have been defined that should lead to efficiencies of 30% or higher within two years. Prototype AMTEC devices are being built today for applications ranging from powering deep space probes (100--150 W) to residential appliance cogeneration (350--500 W) to remote and portable powermore » units (10--500 W). Multi-kilowatt systems may be only two years away. Current designs have power densities of 100--200 W/kg. Where is AMTEC technology at the start of the new millennium? Performance will exceed the numbers given above with the power capacity reaching 10 kW or more. These high power systems will also provide 100 volts or more when desired. Some AMTEC devices may be designed to operate at input temperatures well below that required today (800--900 C), providing more flexibility on the choice of heat source. Realization of industrial and consumer applications for AMTEDC will depend on manufacturing economies achieved through simplification of cell fabrication and high volume production. Advanced Modular Power Systems, Inc. is developing AMTEC manufacturing technology which may lead to costs under $25/watt within two years and under $1/watt eventually. At this cost, AMTEC devices will find broad consumer, and industrial applications.« less

Comprehensive Enhancement of Nanostructured Lithium-Ion Battery Cathode Materials via Conformal Graphene Dispersion

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Kan-Sheng; Xu, Rui; Luu, Norman S.

Efficient energy storage systems based on lithium-ion batteries represent a critical technology across many sectors including consumer electronics, electrified transportation, and a smart grid accommodating intermittent renewable energy sources. Nanostructured electrode materials present compelling opportunities for high-performance lithium-ion batteries, but inherent problems related to the high surface area to volume ratios at the nanometer-scale have impeded their adoption for commercial applications. Here, we demonstrate a materials and processing platform that realizes high-performance nanostructured lithium manganese oxide (nano-LMO) spinel cathodes with conformal graphene coatings as a conductive additive. The resulting nanostructured composite cathodes concurrently resolve multiple problems that have plagued nanoparticle-basedmore » lithium-ion battery electrodes including low packing density, high additive content, and poor cycling stability. Moreover, this strategy enhances the intrinsic advantages of nano-LMO, resulting in extraordinary rate capability and low temperature performance. With 75% capacity retention at a 20C cycling rate at room temperature and nearly full capacity retention at -20 degrees C, this work advances lithium-ion battery technology into unprecedented regimes of operation.« less

Comprehensive Enhancement of Nanostructured Lithium-Ion Battery Cathode Materials via Conformal Graphene Dispersion.

PubMed

Chen, Kan-Sheng; Xu, Rui; Luu, Norman S; Secor, Ethan B; Hamamoto, Koichi; Li, Qianqian; Kim, Soo; Sangwan, Vinod K; Balla, Itamar; Guiney, Linda M; Seo, Jung-Woo T; Yu, Xiankai; Liu, Weiwei; Wu, Jinsong; Wolverton, Chris; Dravid, Vinayak P; Barnett, Scott A; Lu, Jun; Amine, Khalil; Hersam, Mark C

2017-04-12

Efficient energy storage systems based on lithium-ion batteries represent a critical technology across many sectors including consumer electronics, electrified transportation, and a smart grid accommodating intermittent renewable energy sources. Nanostructured electrode materials present compelling opportunities for high-performance lithium-ion batteries, but inherent problems related to the high surface area to volume ratios at the nanometer-scale have impeded their adoption for commercial applications. Here, we demonstrate a materials and processing platform that realizes high-performance nanostructured lithium manganese oxide (nano-LMO) spinel cathodes with conformal graphene coatings as a conductive additive. The resulting nanostructured composite cathodes concurrently resolve multiple problems that have plagued nanoparticle-based lithium-ion battery electrodes including low packing density, high additive content, and poor cycling stability. Moreover, this strategy enhances the intrinsic advantages of nano-LMO, resulting in extraordinary rate capability and low temperature performance. With 75% capacity retention at a 20C cycling rate at room temperature and nearly full capacity retention at -20 °C, this work advances lithium-ion battery technology into unprecedented regimes of operation.

Challenging Stereotypes: An Action Guide. Consumer Information Series, Volume 5.

ERIC Educational Resources Information Center

Arnold, Jean; Weinerth, Nora

This booklet is intended to help decrease the barriers of prejudice toward people who have mental illnesses. It serves as an educational tool to eliminate the stigma associated with mental illness and to help develop anti-stigma or anti-discrimination programs. Increasingly, the media is doing a better job of breaking down the stereotypes…

CHARACTERIZATION OF MERCURY EMISSIONS AT A CHLOR-ALKALI PLANT, VOLUME I. REPORT AND APPENDICES A-E

EPA Science Inventory

The report gives results of a characterization of mercury (Hg) emissions at a chlor-alkali plant. Up to 160 short tons (146 Mg) of Hg is consumed by the chlor-alkali industry each year. Very little quantitative information is currently available however, on the actual Hg losses f...

Consumer and Homemaking 5-6. Manual for Career Education.

ERIC Educational Resources Information Center

Knox County Schools, Knoxville, TN.

Objectives of the SPICE (School Programs in Career Education) curriculum guides are concerned with the areas of self-concept, dignity of work, constant change in the world of work, and relevance of school to work. The career education curriculum in the volume presents units which may be taught as separate subjects, incorporated into all areas of…

Consumer and Homemaking 3-4. Manual for Career Education.

ERIC Educational Resources Information Center

Stewart, James C., Comp.

Objectives of the SPICE (School Programs in Career Education) curriculum guides are concerned with the areas of self-concept, dignity of work, constant change in the world of work, and relevance of school to work. The career education curriculum in the volume presents units which may be taught as separate subjects, incorporated into all areas of…

Character-marked furniture made from red alder harvested in southeast Alaska: product perspectives from consumers and retailers

Treesearch

Matthew Bumgardner; Nicholls David; Valerie Barber

2009-01-01

In recent decades, red alder (Alnus rubra Bong.) has become an important Pacific Northwest hardwood in appearance-grade lumber markets, such as exports, furniture, and cabinets. However, red alder generally is a short-lived pioneer species, and small logs can result in proportionally large volumes of lower grade...

Captains of Consciousness: Advertising and the Social Roots of the Consumer Culture.

ERIC Educational Resources Information Center

Ewen, Stuart

This volume traces the historical roots of advertising from the early years of this century, with special emphasis on the role of industrialization and capitalism during the 1920s. Using the words of early practitioners of advertising and business, analyzing the texts of old and contemporary advertisements, making constant reference to the broad…

Toxicants in Consumer Products. Household Hazardous Waste Disposal Project. Metro Toxicant Program No. 1B.

ERIC Educational Resources Information Center

Ridgley, Susan M.

Four general product classes (pesticides, paint products, household cleaners, and automotive products) are reviewed in this document. Each product class is described, and several aspects of the problem associated with product use or disposal are examined, including estimates of volumes used and environmental impacts. Technical data on the specific…

BASIC Simulation Programs; Volumes V and VI. Social Studies, Teacher Assistance.

ERIC Educational Resources Information Center

Digital Equipment Corp., Maynard, MA.

Five computer programs which teach concepts and processes related to social studies (in the main, economics) are presented. The subjects of the programs are the distinction between balance of trade and balance of payments; installment buying, loan payments, and savings accounts; flow of goods, services, and money between business and the consumer;…

Physicochemical and morphological analysis of ten tomato varieties identifies quality traits more readily manipulated through breeding and traditional selection methods

USDA-ARS?s Scientific Manuscript database

Tomatoes (Solanum lycopersicum L.) are an important source of nutrients in contemporary diets due to readily available fresh fruit and processed products, their popularity, and the sheer volume consumed. This study is part of a larger project undertaken by the Agricultural Research Service (ARS) to...

The Apparel Industry and Codes of Conduct: A Solution to the International Child Labor Problem?

ERIC Educational Resources Information Center

Bureau of International Labor Affairs (DOL), Washington, DC.

Corporate codes of conduct prohibiting the use of child labor are becoming more common as consumers are increasingly calling upon companies to take responsibility for the conditions under which the goods they sell are manufactured. This report (the third volume in the Bureau of International Labor Affairs' international child labor series) details…

Microfluidics-Based Lab-on-Chip Systems in DNA-Based Biosensing: An Overview

PubMed Central

Dutse, Sabo Wada; Yusof, Nor Azah

2011-01-01

Microfluidics-based lab-on-chip (LOC) systems are an active research area that is revolutionising high-throughput sequencing for the fast, sensitive and accurate detection of a variety of pathogens. LOCs also serve as portable diagnostic tools. The devices provide optimum control of nanolitre volumes of fluids and integrate various bioassay operations that allow the devices to rapidly sense pathogenic threat agents for environmental monitoring. LOC systems, such as microfluidic biochips, offer advantages compared to conventional identification procedures that are tedious, expensive and time consuming. This paper aims to provide a broad overview of the need for devices that are easy to operate, sensitive, fast, portable and sufficiently reliable to be used as complementary tools for the control of pathogenic agents that damage the environment. PMID:22163925

Intermetallic compounds in 3D integrated circuits technology: a brief review

NASA Astrophysics Data System (ADS)

Annuar, Syahira; Mahmoodian, Reza; Hamdi, Mohd; Tu, King-Ning

2017-12-01

The high performance and downsizing technology of three-dimensional integrated circuits (3D-ICs) for mobile consumer electronic products have gained much attention in the microelectronics industry. This has been driven by the utilization of chip stacking by through-Si-via and solder microbumps. Pb-free solder microbumps are intended to replace conventional Pb-containing solder joints due to the rising awareness of environmental preservation. The use of low-volume solder microbumps has led to crucial constraints that cause several reliability issues, including excessive intermetallic compounds (IMCs) formation and solder microbump embrittlement due to IMCs growth. This article reviews technologies related to 3D-ICs, IMCs formation mechanisms and reliability issues concerning IMCs with Pb-free solder microbumps. Finally, future outlook on the potential growth of research in this area is discussed.

Intermetallic compounds in 3D integrated circuits technology: a brief review.

PubMed

Annuar, Syahira; Mahmoodian, Reza; Hamdi, Mohd; Tu, King-Ning

2017-01-01

The high performance and downsizing technology of three-dimensional integrated circuits (3D-ICs) for mobile consumer electronic products have gained much attention in the microelectronics industry. This has been driven by the utilization of chip stacking by through-Si-via and solder microbumps. Pb-free solder microbumps are intended to replace conventional Pb-containing solder joints due to the rising awareness of environmental preservation. The use of low-volume solder microbumps has led to crucial constraints that cause several reliability issues, including excessive intermetallic compounds (IMCs) formation and solder microbump embrittlement due to IMCs growth. This article reviews technologies related to 3D-ICs, IMCs formation mechanisms and reliability issues concerning IMCs with Pb-free solder microbumps. Finally, future outlook on the potential growth of research in this area is discussed.

Thin film module development

NASA Technical Reports Server (NTRS)

Jester, T.

1985-01-01

The design of ARCO Solar, Inc.'s Genesis G100 photovoltaic module was driven by several criteria, including environmental stability (both electrical and mechanical), consumer aesthetics, low materials costs, and manufacturing ease. The module circuitry is designed as a 12 volt battery charger, using monolithic patterning techniques on a glass superstrate. This patterning and interconnect method proves amenable to high volume, low cost production throughput, and the use of glass serves the dual role of handling ease and availability. The mechanical design of the module centers on environmental stability. Packaging of the glass superstrate circuit must provide good resistance to thermal and humidity exposure along with hi-pot insulation and hailstone impact resistance. The options considered are given. Ethylene vinyl acetate (EVA) is chosen as the pottant material for its excellent weatherability.

Laser cutting of ultra-thin glasses based on a nonlinear laser interaction effect

NASA Astrophysics Data System (ADS)

Chen, Jian; Wu, Zhouling

2013-07-01

Glass panel substrates have been widely used in consumer electronics such as in flat panel TVs, laptops, and cell phones. With the advancement in the industry, the glass substrates are becoming thinner and stronger for reduced weight and volume, which brings great challenges for traditional mechanical processes in terms of cut quality, yield, and throughput. Laser glass cutting provides a non-contact process with minimum impact and superior quality compared to the mechanical counterparts. In this paper, we presented recent progresses in advanced laser processing of ultra-thin glass substrates, especially laser-cutting of ultra-thin glasses by a high power laser through a nonlinear interaction effect. Our results indicate that this technique has great potential of application for mass production of ultra-thin glass substrates.

Data Acquisition and Linguistic Resources

NASA Astrophysics Data System (ADS)

Strassel, Stephanie; Christianson, Caitlin; McCary, John; Staderman, William; Olive, Joseph

All human language technology demands substantial quantities of data for system training and development, plus stable benchmark data to measure ongoing progress. While creation of high quality linguistic resources is both costly and time consuming, such data has the potential to profoundly impact not just a single evaluation program but language technology research in general. GALE's challenging performance targets demand linguistic data on a scale and complexity never before encountered. Resources cover multiple languages (Arabic, Chinese, and English) and multiple genres -- both structured (newswire and broadcast news) and unstructured (web text, including blogs and newsgroups, and broadcast conversation). These resources include significant volumes of monolingual text and speech, parallel text, and transcribed audio combined with multiple layers of linguistic annotation, ranging from word aligned parallel text and Treebanks to rich semantic annotation.

Obesity: A crisis of growing proportions.

PubMed

Berall, Glenn B

2002-05-01

Childhood obesity is a condition characterized by an imbalance between energy consumed and energy expended. A variety of factors that are unique to our modern day western society lead to the increasing prevalence of childhood obesity. The ease and volume of food supply, high calorie density, convenience foods, convenience transportation, sedentary lifestyle, school system issues, and perceptions of unsafe neighbourhoods all contribute to this increase in obesity. Consequences of childhood obesity are now known to carry health risks for childhood, as well as greater health risks in adulthood. A societal approach to solving this problem is necessary. The paediatrician's role as an advocate in society is vital. On an individual basis, paediatricians can help to identify these patterns early and prevent them by providing basic nutritional advice to the child and parents at an early stage.

Systems aspects of COBE science data compression

NASA Technical Reports Server (NTRS)

Freedman, I.; Boggess, E.; Seiler, E.

1993-01-01

A general approach to compression of diverse data from large scientific projects has been developed and this paper addresses the appropriate system and scientific constraints together with the algorithm development and test strategy. This framework has been implemented for the COsmic Background Explorer spacecraft (COBE) by retrofitting the existing VAS-based data management system with high-performance compression software permitting random access to the data. Algorithms which incorporate scientific knowledge and consume relatively few system resources are preferred over ad hoc methods. COBE exceeded its planned storage by a large and growing factor and the retrieval of data significantly affects the processing, delaying the availability of data for scientific usage and software test. Embedded compression software is planned to make the project tractable by reducing the data storage volume to an acceptable level during normal processing.

Understanding the role consumer involvement plays in the effectiveness of hospital advertising.

PubMed

McCullough, Tammy; Dodge, H Robert

2002-01-01

Both intensified competition and greater consumer participation in the choice process for healthcare has increased the importance of advertising for health care providers and seriously challenged many of the preconceptions regarding advertising. This study investigates the effectiveness of advertising under conditions of high and low involvement using the Elaboration Likelihood Model to develop hypotheses that are tested in a 2 x 2 x 2 experimental design. The study findings provide insights into the influence of message content and message source on consumers categorized as high or low involvement. It was found that consumers classified as high-involvement are more influenced by a core service-relevant message than those consumers classified as low-involvement. Moreover, a non-physician spokesperson was found to have as much or more influence as a physician spokesperson regardless of the consumers' involvement level.

Formulation of consumables management models. Volume 2: Mission planning processor user guide

NASA Technical Reports Server (NTRS)

Daly, J. K.; Torian, J. G.

1978-01-01

A user guide for the MPP (Mission Planning Processor) is presented. The MPP is used in the evaluation of particular missions, with appropriate display and storage of related consumables data. Design goals are accomplished by the use of an on-line/demand mode computer terminal Cathode Ray Tube Display. The process is such that the user merely adds specific mission/flight functions to a skeleton flight and/or alters the skeleton. The skeleton flight includes operational aspects from prelaunch through ground support equipment connect after rollout as required to place the STS (Space Transportation System) in a parking orbit, maintain the spacecraft and crew for the stated on-orbit period and return.

Teacher's Kit for Consumer Education.

ERIC Educational Resources Information Center

Hawaii State Dept. of Education, Honolulu. Office of Instructional Services.

This curriculum guide on Consumer Education, designed for high school seniors, was developed to help students become aware of and knowledgeable about their role as consumers in today's society. The following key concepts for study are emphasized: general principles of consumer purchasing; consumer credit; general principles of fraud, quackery,…

Topology-aware illumination design for volume rendering.

PubMed

Zhou, Jianlong; Wang, Xiuying; Cui, Hui; Gong, Peng; Miao, Xianglin; Miao, Yalin; Xiao, Chun; Chen, Fang; Feng, Dagan

2016-08-19

Direct volume rendering is one of flexible and effective approaches to inspect large volumetric data such as medical and biological images. In conventional volume rendering, it is often time consuming to set up a meaningful illumination environment. Moreover, conventional illumination approaches usually assign same values of variables of an illumination model to different structures manually and thus neglect the important illumination variations due to structure differences. We introduce a novel illumination design paradigm for volume rendering on the basis of topology to automate illumination parameter definitions meaningfully. The topological features are extracted from the contour tree of an input volumetric data. The automation of illumination design is achieved based on four aspects of attenuation, distance, saliency, and contrast perception. To better distinguish structures and maximize illuminance perception differences of structures, a two-phase topology-aware illuminance perception contrast model is proposed based on the psychological concept of Just-Noticeable-Difference. The proposed approach allows meaningful and efficient automatic generations of illumination in volume rendering. Our results showed that our approach is more effective in depth and shape depiction, as well as providing higher perceptual differences between structures.

Anticipatory and reactive responses to chocolate restriction in frequent chocolate consumers.

PubMed

Keeler, Chelsey L; Mattes, Richard D; Tan, Sze-Yen

2015-06-01

Many individuals have difficulty adhering to a weight loss diet. One possible explanation could be that dietary restriction paradoxically contributes to overconsumption. The objective of this study was to examine ingestive behavior under a forced chocolate restriction with a focus on the anticipatory restriction period and the post-restriction period in frequent chocolate consumers. Fifty-six male (N = 18) and female (N = 38) high chocolate consumers with high (N = 25) or low (N = 31) cognitive disinhibition participated. Chocolate snacks were provided for a week each to establish baseline, pre-restriction, and post-restriction consumption, Chocolate snacks were replaced with nonchocolate snacks during a 3-week chocolate restriction period. Highly disinhibited participants felt more guilty and consumed significantly more energy than low disinhibited participants across snack conditions. Low disinhibited participants consumed significantly less in the post-restriction period compared to baseline and the pre-restriction period, while high disinhibited participants consumed the same amount across all conditions. Aggregating the data, high and low disinhibited chocolate consumers ate snacks more frequently in the pre- and post-restriction periods compared to the baseline period. This study suggests that for some individuals, restriction of a preferred food like chocolate may be contraindicated for energy restriction and weight management. © 2015 The Obesity Society.

Forecasting on the total volumes of Malaysia's imports and exports by multiple linear regression

NASA Astrophysics Data System (ADS)

Beh, W. L.; Yong, M. K. Au

2017-04-01

This study is to give an insight on the doubt of the important of macroeconomic variables that affecting the total volumes of Malaysia's imports and exports by using multiple linear regression (MLR) analysis. The time frame for this study will be determined by using quarterly data of the total volumes of Malaysia's imports and exports covering the period between 2000-2015. The macroeconomic variables will be limited to eleven variables which are the exchange rate of US Dollar with Malaysia Ringgit (USD-MYR), exchange rate of China Yuan with Malaysia Ringgit (RMB-MYR), exchange rate of European Euro with Malaysia Ringgit (EUR-MYR), exchange rate of Singapore Dollar with Malaysia Ringgit (SGD-MYR), crude oil prices, gold prices, producer price index (PPI), interest rate, consumer price index (CPI), industrial production index (IPI) and gross domestic product (GDP). This study has applied the Johansen Co-integration test to investigate the relationship among the total volumes to Malaysia's imports and exports. The result shows that crude oil prices, RMB-MYR, EUR-MYR and IPI play important roles in the total volumes of Malaysia's imports. Meanwhile crude oil price, USD-MYR and GDP play important roles in the total volumes of Malaysia's exports.

Chemicals and children's environment: what we don't know about risks.

PubMed

Goldman, L R

1998-06-01

Although we know that certain types of childhood cancers are increasing, we do not know why. With few exceptions, we know little about the role of environmental carcinogens in childhood cancer. Generally, we have adequate information to screen chemicals for potential hazard for only certain categories of chemicals--drugs, food additives, and pesticides. The U.S. Environmental Protection Agency (U.S. EPA) is implementing the 1996 Food Quality Protection Act, which provides added protections against pesticide risks, especially for children. But the situation is quite different for many industrial chemicals. We lack even basic toxicity data for a majority of the U.S. EPA's list of approximately 3000 nonpolymeric high-production-volume industrial chemicals being produced in the United States each year that are found in consumer products and the workplace. We know even less about the remaining 70,000 chemicals on the U.S. EPA inventory. The U.S. EPA has initiatives underway to address the risks posed by some of these commercial chemicals, including efforts to reduce risks posed by indoor air pollutants and household products. These initiatives specifically address children's risks. We are supporting toxicity screening of high-volume industrial chemicals on a cooperative international basis through the Organisation for Economic Co-operation and Development. Until more information is available, it is difficult to assess the possible role of these chemicals in childhood cancer and to take steps to reduce exposure to children.

How Can the Interests of United States Consumers Best Be Protected? National Debate Topic for High Schools, 1980-1981. Senate, Ninety-Sixth Congress, Second Session. High Schools, 1980-1981.

ERIC Educational Resources Information Center

Library of Congress, Washington, DC. Congressional Research Service.

This publication contains background readings on consumer affairs for students who are going to participate in the 1980-1981 national high school debate. The debate topic selected by the National Federation of State High School Associations is consumer protection. The three debate propositions are that the federal government should 1) initiate and…

Consumer Education Learning Activities.

ERIC Educational Resources Information Center

Forkner, Jerry; Schatz, Gail

This handbook contains model lessons on consumer education for use with intermediate, junior high, and high school students. The handbook was developed as a result of a grant which the Social Science Education Consortium received to conduct three consumer education workshops for approximately 100 Colorado teachers and school administrators. Many…

Water incorporated into a food but not served with a food decreases energy intake in lean women.

PubMed

Rolls, B J; Bell, E A; Thorwart, M L

1999-10-01

Previous research showed that decreasing the energy density (kJ/g) of foods by adding water to them can lead to reductions in energy intake. Few studies have examined how water consumed as a beverage affects food intake. This study examined the effects of water, both served with a food and incorporated into a food, on satiety. In a within-subjects design, 24 lean women consumed breakfast, lunch, and dinner in our laboratory 1 d/wk for 4 wk. Subjects received 1 of 3 isoenergetic (1128 kJ) preloads 17 min before lunch on 3 d and no preload on 1 d. The preloads consisted of 1) chicken rice casserole, 2) chicken rice casserole served with a glass of water (356 g), and 3) chicken rice soup. The soup contained the same ingredients (type and amount) as the casserole that was served with water. Decreasing the energy density of and increasing the volume of the preload by adding water to it significantly increased fullness and reduced hunger and subsequent energy intake at lunch. The equivalent amount of water served as a beverage with a food did not affect satiety. Energy intake at lunch was 1209 +/- 125 kJ after the soup compared with 1657 +/- 148 and 1639 +/- 148 kJ after the casserole with and without water, respectively. Subjects did not compensate at dinner for this reduction in lunch intake. Consuming foods with a high water content more effectively reduced subsequent energy intake than did drinking water with food.

Effects of inequality of supply hours on consumers' coping strategies and perceptions of intermittent water supply in Kathmandu Valley, Nepal.

PubMed

Guragai, B; Takizawa, S; Hashimoto, T; Oguma, K

2017-12-01

To investigate the effects of unequal supply hours on consumers' coping strategies and perceptions of the intermittent water supply (IWS) in the Kathmandu Valley (KV), Nepal we conducted a randomized household survey (n=369) and on-site water quality tests. Half of the households received piped water for 6 or fewer hours per week. To augment or cope with the inadequate supply, 28% of the households used highly contaminated and expensive tanker-delivered water. Half of the piped water samples (n=13) were contaminated with Escherichia coli. Free chlorine concentration in all piped water samples was below the national standards (0.1-0.2mg/L), but combined chlorine was detected at an average of 0.24mg/L, indicating ingression of contaminants in the network. Point-of-use devices could increase access to safe water in the KV from 42% to 80%. The use of Lorenz curves and Gini coefficients revealed inequality of piped water supply hours per week both between and within service areas in the KV, due mainly to a small percentage of households who receive longer supply hours. To cope with reduced supply hours, home owners pay more to get water from alternative sources, while tenants compromise their water consumption. Under IWS, expectations for improvements in piped water quality and supply regularity are higher than those for supply volume. Consumers' perceptions of the piped water services worsen with the reduction in supply hours, but perceptions of piped water tariff are independent of supply hours. Copyright © 2017 Elsevier B.V. All rights reserved.

A novel method to quantify the emission and conversion of VOCs in the smoking of electronic cigarettes

NASA Astrophysics Data System (ADS)

Kim, Yong-Hyun; Kim, Ki-Hyun

2015-11-01

An analytical technique was developed for the quantitation of volatile organic compounds (VOC) in three different forms of electronic cigarette (EC): solution, vapor, and aerosol. Through the application of the mass change tracking (MCT) approach, the consumed amount of the solution was measured to track the conversion of targets between the different phases. The concentration of aerosol plus vapor (A&V) decreased exponentially (559 to 129 g m-3) with increasing puff velocity (0.05 to 1 L min-1). A strong correlation existed between sampling volume and consumed solution mass (R2 = 0.9972 ± 0.0021 (n = 4)). In the EC solution, acetic acid was considerably high (25.8 μg mL-1), along with trace quantities of some VOCs (methyl ethyl ketone, toluene, propionic acid, and i-butyric acid: 0.24 ± 0.15 μg mL-1 (n = 4)). In the aerosol samples, many VOCs (n-butyraldehyde, n-butyl acetate, benzene, xylene, styrene, n-valeric acid, and n-hexanoic acid) were newly produced (138 ± 250 μg m-3). In general, the solution-to-aerosol (S/A) conversion was significant: e.g., 1,540% for i-butyric acid. The emission rates of all targets computed based on their mass in aerosol/ consumed solution (ng mL-1) were from 30.1 (p-xylene) to 398 (methyl ethyl ketone), while those of carboxyls were much higher from 166 (acetic acid) to 5,850 (i-butyric acid).

Protein Folding Using a Vortex Fluidic Device.

PubMed

Britton, Joshua; Smith, Joshua N; Raston, Colin L; Weiss, Gregory A

2017-01-01

Essentially all biochemistry and most molecular biology experiments require recombinant proteins. However, large, hydrophobic proteins typically aggregate into insoluble and misfolded species, and are directed into inclusion bodies. Current techniques to fold proteins recovered from inclusion bodies rely on denaturation followed by dialysis or rapid dilution. Such approaches can be time consuming, wasteful, and inefficient. Here, we describe rapid protein folding using a vortex fluidic device (VFD). This process uses mechanical energy introduced into thin films to rapidly and efficiently fold proteins. With the VFD in continuous flow mode, large volumes of protein solution can be processed per day with 100-fold reductions in both folding times and buffer volumes.

Recycling potential of post-consumer plastic packaging waste in Finland.

PubMed

Dahlbo, Helena; Poliakova, Valeria; Mylläri, Ville; Sahimaa, Olli; Anderson, Reetta

2018-01-01

Recycling of plastics is urged by the need for closing material loops to maintain our natural resources when striving towards circular economy, but also by the concern raced by observations of plastic scrap in oceans and lakes. Packaging industry is the sector using the largest share of plastics, hence packaging dominates in the plastic waste flow. The aim of this paper was to sum up the recycling potential of post-consumer plastic packaging waste in Finland. This potential was evaluated based on the quantity, composition and mechanical quality of the plastic packaging waste generated by consumers and collected as a source-separated fraction, within the mixed municipal solid waste (MSW) or within energy waste. Based on the assessment 86,000-117,000 tons (18 kg/person/a) of post-consumer plastic packaging waste was generated in Finland in 2014. The majority, 84% of the waste was in the mixed MSW flow in 2014. Due to the launching of new sorting facilities and separate collections for post-consumer plastic packaging in 2016, almost 40% of the post-consumer plastic packaging could become available for recycling. However, a 50% recycling rate for post-consumer plastic packaging (other than PET bottles) would be needed to increase the overall MSW recycling rate from the current 41% by around two percentage points. The share of monotype plastics in the overall MSW plastics fraction was 80%, hence by volume the recycling potential of MSW plastics is high. Polypropylene (PP) and low density polyethylene (LDPE) were the most common plastic types present in mixed MSW, followed by polyethylene terephthalate (PET), polystyrene (PS) and high density polyethylene (HDPE). If all the Finnish plastic packaging waste collected through the three collection types would be available for recycling, then 19,000-25,000 tons of recycled PP and 6000-8000 tons of recycled HDPE would be available on the local market. However, this assessment includes uncertainties due to performing the composition study only on mixed MSW plastic fraction. In order to obtain more precise figures of the recycling potential of post-consumer plastic packaging, more studies should be performed on both the quantities and the qualities of plastic wastes. The mechanical and rheological test results indicated that even plastic wastes originating from the mixed MSW, can be useful raw materials. Recycled HDPE showed a smaller decline in the mechanical properties than recycled PP. The origin and processing method of waste plastic seemed to have less effect on the mechanical quality than the type of plastic. The applicability of a plastic waste for a product needs to be assessed case by case, due to product specific quality requirements. In addition to mechanical properties, the chemical composition of plastic wastes is of major importance, in order to be able to restrict hazardous substances from being circulated undesirably. In addition to quantity and quality of plastic wastes, the sustainability of the whole recycling chain needs to be assessed prior to launching operations so that the chain can be optimized to generate both environmental and economic benefits to society and operators. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of information about animal welfare on consumer willingness to pay for yogurt.

PubMed

Napolitano, F; Pacelli, C; Girolami, A; Braghieri, A

2008-03-01

This study aimed to verify whether consumers confirm their willingness to pay extra costs for higher animal welfare standards in a situation where a potential purchase performed by consumers, such as the Vickrey auction, is used. A 104-member consumer panel was asked to rate its willingness to pay (WTP) for plain and low-fat yogurts in 3 information conditions: tasting without information (blind WTP), information about animal welfare without tasting (expected WTP), tasting with information about animal welfare (actual WTP). Information was provided to the consumers under the form of labels indicating the level of animal cleanliness and freedom of movement (5-point scale, from poor to very good). Consumers were influenced by information about low standards of animal welfare (low cleanliness and low freedom of movement) and moved their willingness to pay in the direction of their expectations. However, the discrepancy between expectancy and actual WTP was not totally assimilated, indicating that WTP was also expressed in relation to other aspects (e.g., the sensory properties of the products). Conversely, the information concerning high standards of animal welfare (high cleanliness and high freedom of movement) was able to affect expectancy but had an effect on actual WTP only when the most acceptable yogurt was offered to the consumers. In the case of discordant information on animal welfare, partly indicating high levels of welfare (freedom of movements) and low levels of welfare (cleanliness), expected WTP was always lower than blind WTP. However, when the least acceptable product was presented, they completely assimilated their actual WTP to the expectations. Conversely, with the most acceptable yogurt, no assimilation occurred and sensory properties prevailed in orienting consumer WTP. Within each product, consumers expressed a higher WTP for products with labels indicating high welfare standards as compared with yogurts with labels reporting intermediate and low welfare standard. These results show that information about animal welfare, if given to the consumers, can be a major determinant of consumer WTP for animal-based food products. However, information about high standards of animal welfare should be paired with products presenting a good eating quality.

Close-range photogrammetric reconstruction of moraine dam failures

NASA Astrophysics Data System (ADS)

Westoby, M. J.; Brasington, J.; Glasser, N. F.; Hambrey, M. J.; Reynolds, J. M.

2012-04-01

Glacial Lake Outburst Floods (GLOFs) from moraine-dammed lakes represent a high magnitude, low frequency catastrophic glacio-fluvial phenomena, with the potential to cause significant damage to property and infrastructure in high-mountain regions. Detailed accounts of GLOF dynamics, in particular the initiation and propagation of dam breaching are extremely rare, owing to their occurrence in often remote, inaccessible areas, as well as the impracticalities associated with attempting to directly instrument such high magnitude, turbulent flows. In addition to the dearth of detailed, first-hand observations of dam failures, reconstruction of breaches and failure mechanisms derived from morphological evidence is hampered by the lack of high-quality, high-resolution DTMs of remote alpine areas. Previous studies have therefore resorted to the use of coarse resolution data products (SRTM, ASTER GDEM) to quantify characteristics of failure events, e.g. pre-flood lake volume, dam height/width, which may give rise to considerable uncertainty in related numerical simulations and assessments of downstream flood hazards. In this paper we employ a novel low-cost, close-range photogrammetric technique, termed 'Structure-from-Motion' (SfM) to provide detailed in-situ reconstructions of dam and valley topography for two moraine dam complexes which have produced historical GLOFs in the Khumbu Himal, Nepal. Requiring little more than a consumer-grade digital camera and suitable ground control for implementation, the resolution of the final data products are comparable to that obtained using ground-based or airborne LiDAR. These data facilitate the extraction of precise estimates of dam (and breach) geometry, volumes of water and sediment removed during the outburst events, and the downstream channel topography. We conclude by directly comparing such key metrics derived from low-resolution topographic datasets, with those acquired in situ using the SfM technique, and discuss the implications for the reconstruction of flood dynamics.

A rapid review of the impact of commissioning on service use, quality, outcomes and value for money: implications for Australian policy.

PubMed

Gardner, Karen; Davies, G Powell; Edwards, Karen; McDonald, Julie; Findlay, Terry; Kearns, Rachael; Joshi, Chandni; Harris, Mark

2016-01-01

The aim of this systematic review was to assess evidence of the impact of commissioning on health service use, quality, outcomes and value for money and to consider findings in the Australian context. Systematic searches of the literature identified 444 papers and, after exclusions, 36 were subject to full review. The commissioning cycle (planning, contracting, monitoring) formed a framework for analysis and impacts were assessed at individual, subpopulation and population levels. Little evidence of the effectiveness of commissioning at any level was available and observed impacts were highly context-dependent. There was insufficient evidence to identify a preferred model. Lack of skills and capacity were cited as major barriers to the implementation of commissioning. Successful commissioning requires a clear policy framework of national and regional priorities that define agreed targets for commissioning agencies. Engagement of consumers and providers, especially physicians, was considered to be critically important but is time consuming and has proven difficult to sustain. Adequate information on the cost, volume and quality of healthcare services is critically important for setting priorities, and for contracting and monitoring performance. Lack of information resulted in serious problems. High-quality nationally standardised performance measures and data requirements need to be built into contracts and ongoing monitoring and evaluation. In Australia, there is significant work to be done in areas of policy and governance, funding systems and incentives, patient enrolment or registration, information systems, individual and organisational capacity, community engagement and experience in commissioning.

Consumer Education (A High School One Semester Course).

ERIC Educational Resources Information Center

Hawaii State Dept. of Education, Honolulu. Office of Instructional Services.

Designed for a one-semester high school social studies elective course, this curriculum guide uses a multidisciplinary approach to teach consumer education. Eight units of study cover the marketplace, consumer protection, decision making, money management, credit and taxes, basic necessities, housing, and future security. Within each unit, an…

Three-dimensional murine airway segmentation in micro-CT images

NASA Astrophysics Data System (ADS)

Shi, Lijun; Thiesse, Jacqueline; McLennan, Geoffrey; Hoffman, Eric A.; Reinhardt, Joseph M.

2007-03-01

Thoracic imaging for small animals has emerged as an important tool for monitoring pulmonary disease progression and therapy response in genetically engineered animals. Micro-CT is becoming the standard thoracic imaging modality in small animal imaging because it can produce high-resolution images of the lung parenchyma, vasculature, and airways. Segmentation, measurement, and visualization of the airway tree is an important step in pulmonary image analysis. However, manual analysis of the airway tree in micro-CT images can be extremely time-consuming since a typical dataset is usually on the order of several gigabytes in size. Automated and semi-automated tools for micro-CT airway analysis are desirable. In this paper, we propose an automatic airway segmentation method for in vivo micro-CT images of the murine lung and validate our method by comparing the automatic results to manual tracing. Our method is based primarily on grayscale morphology. The results show good visual matches between manually segmented and automatically segmented trees. The average true positive volume fraction compared to manual analysis is 91.61%. The overall runtime for the automatic method is on the order of 30 minutes per volume compared to several hours to a few days for manual analysis.

Rheological, thermo-mechanical, and baking properties of wheat-millet flour blends.

PubMed

Aprodu, Iuliana; Banu, Iuliana

2015-07-01

Millet has long been known as a good source of fiber and antioxidants, but only lately started to be exploited by food scientists and food industry as a consequence of increased consumer awareness. In this study, doughs and breads were produced using millet flour in different ratios (10, 20, 30, 40, and 50%) to white, dark, and whole wheat flour. The flour blends were evaluated in terms of rheological and thermo-mechanical properties. Fundamental rheological measurements revealed that the viscosity of the flour formulations increases with wheat flour-extraction rate and decreases with the addition of millet flour. Doughs behavior during mixing, overmixing, pasting, and gelling was established using the Mixolab device. The results of this bread-making process simulation indicate that dough properties become critical for the flour blends with millet levels higher than 30%. The breads were evaluated for volume, texture, and crumb-grain characteristics. The baking test and sensory evaluation results indicated that substitution levels of up to 30% millet flour could be used in composite bread flour. High levels of millet flour (40 and 50%) negatively influenced the loaf volume, crumb texture, and taste. © The Author(s) 2014.

Alcohol and cannabis consumption in the French Army: determination of consumer profiles to focus on prevention and care.

PubMed

Rigod, Violaine; Pilard, Michel; Paul, Frédéric; Deparis, Xavier; Marimoutou, Catherine

2011-07-01

To ascertain the different profiles of alcohol and cannabis consumers in the French Army to improve prevention measures. A representative sample of 990 French Army staff filled in self-questionnaires in 2006. A multiple correspondence analysis identified associations between consumption and consumer profiles. The multiple correspondence analysis found three main consumer profiles: non-consumers (women and officers), moderate consumers (non-commissioned officers > 30-years old, single parents with children), and occasional multi-consumers (18-25-years-old enlisted males, who occasionally consumed cannabis and high levels of alcohol, also tobacco-addicts). Two minor profiles emerged: daily alcohol drinkers (men, > or = 30 years) and regular dependent cannabis users (identical profile to multi-consumers). Our results favor targeting the youngest to prevent the risks of high alcohol intake and cannabis consumption and addiction linked to repeated binge drinking. Systematic questionnaires on consumption habits and addiction self-evaluations during medical consultations could lead to early care.

Membranes for Food and Bioproduct Processing

NASA Astrophysics Data System (ADS)

Avram, Alexandru M.

Modified membranes for process intensification in biomass hydrolysis: Production of biofuels and chemicals from lignocellulosic biomass is one of the leading candidates for replacement of petroleum based fuels and chemicals. However, conversion of lignocellulosic biomass into fuels and chemicals is not cost effective compared to the production of fuels and chemicals from crude oil reserves. Some novel and economically feasible approaches involve the use of ionic liquids as solvents or co-solvents, since these show improved solvation capability of cellulose over simple aqueous systems. Membranes offer unique opportunities for process intensification which involves fractionation of the resulting biomass hydrolysate leading to a more efficient and cheaper operation. This research attempts to develop membranes that would usher the economics of the biochemical conversion of lignocellulosic biomass into fuels and chemicals by recycling the expensive ionic liquid. The overall aim of this work is the development of novel membranes with unique surface properties that enable the selective separation of non-reacted cellulose and hydrolysis sugars from ionic liquids. Nanofiltration separation for application in food product engineering: With the advent of the modern, well-informed consumer who has high expectations from the nutritional value of consumed food products, novel approaches are being developed to produce nutrient-enhanced foods and drinks. As a response to the consumer needs, different techniques to recover, concentrate and retain as much as possible of bioactive compounds are being investigated. Membrane technology has the advantage of selective fractionation of food products (e.g. salt removal, removal of bitter-tasting compounds or removal of sugar for sweet taste adjustment), volume reduction, and product recovery at mild conditions. In this work, we use nanofiltration in dead-end and crossflow mode to concentrate polyphenols from blueberry pomace. Blueberry pomace is an overlooked waste product form the juice pressing of blueberries that contains high amounts of health-beneficial antioxidants. We aim at developing a simple, yet efficient membrane process that reduces the amount of water and thus concentrates the amount of polyphenols in the retentate.

Reliability of a survey tool for measuring consumer nutrition environment in urban food stores.

PubMed

Hosler, Akiko S; Dharssi, Aliza

2011-01-01

Despite the increase in the volume and importance of food environment research, there is a general lack of reliable measurement tools. This study presents the development and reliability assessment of a tool for measuring consumer nutrition environment in urban food stores. Cross-sectional design. A racially diverse downtown portion (6 ZIP code areas) in Albany, New York. A sample of 39 food stores was visited by our research team in 2009 to 2010. These stores were randomly selected from 123 eligible food stores identified through multiple government lists and ground-truthing. The Food Retail Outlet Survey Tool was developed to assess the presence of selected food and nonfood items, placement, milk prices, physical characteristics of the store, policy implementation, and advertisements on outside windows. For in-store items, agreement of observations between experienced and lightly trained surveyors was assessed. For window advertisement assessments, inter-method agreement (on-site sketch vs digital photo), and inter-rater agreement (both on-site) among lightly trained surveyors were evaluated. Percent agreement, Kappa, and prevalence-adjusted bias-adjusted kappa were calculated for in-store observations. Interclass correlation coefficients were calculated for window observations. Twenty-seven of the 47 in-store items had 100% agreement. The prevalence-adjusted bias-adjusted kappa indicated excellent agreement (≥0.90) on all items, except aisle width (0.74) and dark-green/orange colored fresh vegetables (0.85). The store type (nonconvenience store), the order of visits (first half), and the time to complete survey (>10 minutes) were associated with lower reliability in these 2 items. Both the inter-method and inter-rater agreements for window advertisements were uniformly high (intraclass correlation coefficient ranged 0.94-1.00), indicating high reliability. The Food Retail Outlet Survey Tool is a reliable tool for quickly measuring consumer nutrition environment. It can be effectively used by an individual who attended a 30-minute group briefing and practiced with 3 to 4 stores.

Ultra-high-pressure liquid chromatography tandem mass spectrometry determination of hallucinogenic drugs in hair of psychedelic plants and mushrooms consumers.

PubMed

Pichini, Simona; Marchei, Emilia; García-Algar, Oscar; Gomez, Arelis; Di Giovannandrea, Rita; Pacifici, Roberta

2014-11-01

A procedure based on ultra-high-pressure liquid chromatography tandem mass spectrometry has been developed for the determination of mescaline, N,N-dimethyltryptamine, psilocin, psilocybin, salvinorin A in hair of consumers of psychedelic vegetal material such peyote or trichocereus cacti, psilocybe mushrooms, Salvia divinorum or psychedelic beverage ayahuasca. After hair washing with methyl alcohol and diethyl ether and subsequent addition of mescaline-d9 and 3,4-methylenedioxypropylamphetamine as internal standards, hair samples were treated with 250μl VMA-T M3 reagent for 1h at 100°C. After cooling, 100μl M3 extract were diluted with 400μl water and a volume of 10μl was injected into chromatographic system. Chromatographic separation was achieved at ambient temperature using a reverse-phase column and a linear gradient elution with two solvents: 0.3% formic acid in acetonitrile and 5mM ammonium formate pH 3. The mass spectrometer was operated in positive ion mode, using multiple reaction monitoring via positive electrospray ionization. The method was linear from the limit of quantification (0.03-0.05ng/mg depending on analyte under investigation) to 10ng/mg hair, with an intra- and inter-assay imprecision and inaccuracy always less than 15% and an analytical recovery between 79.6% and 97.4%, depending on the considered analyte. Using the validated method, mescaline was found in concentration range of 0.08-0.13ng/mg in hair of peyote smokers, 3.2ng salvinorin A per mg hair were determined in hair from a S. divinorum smoker, 5.6ng N,N-dimethyltryptamine per mg hair from an ayahuasca user and finally 0.8ng psilocybin per ng hair of a psilocybe consumer. Copyright © 2014 Elsevier B.V. All rights reserved.

Determinants of price setting decisions on anti-malarial drugs at retail shops in Cambodia.

PubMed

Patouillard, Edith; Hanson, Kara; Kleinschmidt, Immo; Palafox, Benjamin; Tougher, Sarah; Pok, Sochea; O'Connell, Kate; Goodman, Catherine

2015-05-30

In many low-income countries, the private commercial sector plays an important role in the provision of malaria treatment. However, the quality of care it provides is often poor, with artemisinin combination therapy (ACT) generally being too costly for consumers. Decreasing ACT prices is critical for improving private sector treatment outcomes and reducing the spread of artemisinin resistance. Yet limited evidence exists on the factors influencing retailers' pricing decisions. This study investigates the determinants of price mark-ups on anti-malarial drugs in retail outlets in Cambodia. Taking an economics perspective, the study tests the hypothesis that the structure of the anti-malarial market determines the way providers set their prices. Providers facing weak competition are hypothesized to apply high mark-ups and set prices above the competitive level. To analyse the relationship between market competition and provider pricing, the study used cross-sectional data from retail outlets selling anti-malarial drugs, including outlet characteristics data (e.g. outlet type, anti-malarial sales volumes), range of anti-malarial drugs stocked (e.g. dosage form, brand status) and purchase and selling prices. Market concentration, a measure of the level of market competition, was estimated using sales volume data. Market accessibility was defined based on travel time to the closest main commercial area. Percent mark-ups were calculated using price data. The relationship between mark-ups and market concentration was explored using regression analysis. The anti-malarial market was on average highly concentrated, suggesting weak competition. Higher concentration was positively associated with higher mark-ups in moderately accessible markets only, with no significant relationship or a negative relationship in other markets. Other determinants of pricing included anti-malarial brand status and generic type, with higher mark-ups on cheaper products. The results indicate that provider pricing as well as other key elements of anti-malarial supply and demand may have played an important role in the limited access to appropriate malaria treatment in Cambodia. The potential for an ACT price subsidy at manufacturer level combined with effective communications directed at consumers and supportive private sector regulation should be explored to improve access to quality malaria treatment in Cambodia.

Improved biovolume estimation of Microcystis aeruginosa colonies: A statistical approach.

PubMed

Alcántara, I; Piccini, C; Segura, A M; Deus, S; González, C; Martínez de la Escalera, G; Kruk, C

2018-05-27

The Microcystis aeruginosa complex (MAC) clusters many of the most common freshwater and brackish bloom-forming cyanobacteria. In monitoring protocols, biovolume estimation is a common approach to determine MAC colonies biomass and useful for prediction purposes. Biovolume (μm 3 mL -1 ) is calculated multiplying organism abundance (orgL -1 ) by colonial volume (μm 3 org -1 ). Colonial volume is estimated based on geometric shapes and requires accurate measurements of dimensions using optical microscopy. A trade-off between easy-to-measure but low-accuracy simple shapes (e.g. sphere) and time costly but high-accuracy complex shapes (e.g. ellipsoid) volume estimation is posed. Overestimations effects in ecological studies and management decisions associated to harmful blooms are significant due to the large sizes of MAC colonies. In this work, we aimed to increase the precision of MAC biovolume estimations by developing a statistical model based on two easy-to-measure dimensions. We analyzed field data from a wide environmental gradient (800 km) spanning freshwater to estuarine and seawater. We measured length, width and depth from ca. 5700 colonies under an inverted microscope and estimated colonial volume using three different recommended geometrical shapes (sphere, prolate spheroid and ellipsoid). Because of the non-spherical shape of MAC the ellipsoid resulted in the most accurate approximation, whereas the sphere overestimated colonial volume (3-80) especially for large colonies (MLD higher than 300 μm). Ellipsoid requires measuring three dimensions and is time-consuming. Therefore, we constructed different statistical models to predict organisms depth based on length and width. Splitting the data into training (2/3) and test (1/3) sets, all models resulted in low training (1.41-1.44%) and testing average error (1.3-2.0%). The models were also evaluated using three other independent datasets. The multiple linear model was finally selected to calculate MAC volume as an ellipsoid based on length and width. This work contributes to achieve a better estimation of MAC volume applicable to monitoring programs as well as to ecological research. Copyright © 2017. Published by Elsevier B.V.

Integration of In Situ Radon Modeling with High Resolution Aerial Remote Sensing for Mapping and Quantifying Local to Regional Flow and Transport of Submarine Groundwater Discharge from Coastal Aquifers

NASA Astrophysics Data System (ADS)

Glenn, C. R.; Kennedy, J. J.; Dulaiova, H.; Kelly, J. L.; Lucey, P. G.; Lee, E.; Fackrell, J.

2015-12-01

Submarine groundwater discharge (SGD) is a principal conduit for huge volumes of fresh groundwater loss and is a key transport mechanism for nutrient and contaminant pollution to coastal zones worldwide. However, the volumes and spatially and temporally variable nature of SGD is poorly known and requires rapid and high-resolution data acquisition at the scales in which it is commonly observed. Airborne thermal infrared (TIR) remote sensing, using high-altitude manned aircraft and low-altitude remote-controlled unmanned aerial vehicles (UAVs or "Drones") are uniquely qualified for this task, and applicable wherever 0.1°C temperature contrasts exist between discharging and receiving waters. We report on the use of these technologies in combination with in situ radon model studies of SGD volume and nutrient flux from three of the largest Hawaiian Islands. High altitude manned aircraft results produce regional (~300m wide x 100s km coastline) 0.5 to 3.2 m-resolution sea-surface temperature maps accurate to 0.7°C that show point-source and diffuse flow in exquisite detail. Using UAVs offers cost-effective advantages of higher spatial and temporal resolution and instantaneous deployments that can be coordinated simultaneously with any ground-based effort. We demonstrate how TIR-mapped groundwater discharge plume areas may be linearly and highly correlated to in situ groundwater fluxes. We also illustrate how in situ nutrient data may be incorporated into infrared imagery to produce nutrient distribution maps of regional worth. These results illustrate the potential for volumetric quantification and up-scaling of small- to regional-scale SGD. These methodologies provide a tremendous advantage for identifying and differentiating spring-fed, point-sourced, and/or diffuse groundwater discharge into oceans, estuaries, and streams. The integrative techniques are also important precursors for developing best-use and cost-effective strategies for otherwise time-consuming in situ studies, and represent a substantial new asset for land use and coastal zone research and management.

A forecasting model for power consumption of high energy-consuming industries based on system dynamics

NASA Astrophysics Data System (ADS)

Zhou, Zongchuan; Dang, Dongsheng; Qi, Caijuan; Tian, Hongliang

2018-02-01

It is of great significance to make accurate forecasting for the power consumption of high energy-consuming industries. A forecasting model for power consumption of high energy-consuming industries based on system dynamics is proposed in this paper. First, several factors that have influence on the development of high energy-consuming industries in recent years are carefully dissected. Next, by analysing the relationship between each factor and power consumption, the system dynamics flow diagram and equations are set up to reflect the relevant relationships among variables. In the end, the validity of the model is verified by forecasting the power consumption of electrolytic aluminium industry in Ningxia according to the proposed model.

Music increases alcohol consumption rate in young females.

PubMed

Stafford, Lorenzo D; Dodd, Hannah

2013-10-01

Previous field research has shown that individuals consumed more alcohol and at a faster rate in environments paired with loud music. Theoretically, this effect has been linked to approach/avoidance accounts of how music influences arousal and mood, but no work has tested this experimentally. In the present study, female participants (n = 45) consumed an alcoholic (4% alcohol-by-volume) beverage in one of three contexts: slow tempo music, fast tempo music, or a no-music control. Results revealed that, compared with the control, the beverage was consumed fastest in the two music conditions. Interestingly, whereas arousal and negative mood declined in the control condition, this was not the case for either of the music conditions, suggesting a downregulation of alcohol effects. We additionally found evidence for music to disrupt sensory systems in that, counterintuitively, faster consumption was driven by increases in perceived alcohol strength, which, in turn, predicted lower breath alcohol level (BrAL). These findings suggest a unique interaction of music environment and psychoactive effects of alcohol itself on consumption rate. Because alcohol consumed at a faster rate induces greater intoxication, these findings have implications for applied and theoretical work. PsycINFO Database Record (c) 2013 APA, all rights reserved.

Does Long-Term High Fat Diet Always Lead to Smaller Hippocampi Volumes, Metabolite Concentrations, and Worse Learning and Memory? A Magnetic Resonance and Behavioral Study in Wistar Rats.

PubMed

Setkowicz, Zuzanna; Gaździńska, Agata; Osoba, Joanna J; Karwowska, Karolina; Majka, Piotr; Orzeł, Jarosław; Kossowski, Bartosz; Bogorodzki, Piotr; Janeczko, Krzysztof; Wyleżoł, Mariusz; Gazdzinski, Stefan P

2015-01-01

Obesity is a worldwide epidemic with more than 600 million affected individuals. Human studies have demonstrated some alterations in brains of otherwise healthy obese individuals and elevated risk of neurodegenerative disease of old age; these studies have also pointed to slightly diminished memory and executive functions among healthy obese individuals. Similar findings were obtained in animal models of obesity induced by high fat diet. On the other hand, low carbohydrate high fat diets are currently promoted for losing weight (e.g., Atkin's style diets). However, the long-term effects of such diets are not known. Additionally, high fat diets leading to (mild) ketonemia were shown to improve brain function in elderly humans and in some animal models. To evaluate the hypothesis that long-term use of a high fat diet was associated with decreases in spatial memory, smaller hippocampi and hippocampi metabolite concentrations in Wistar rats. Twenty five male Wistar rats were put on high fat diet (HFD; 60% calories from fat, 30% from carbohydrates) on their 55th day of life, while 25 control male rats (CONs) remained on chow. Adequate levels of essential nutrients were provided. Both groups underwent memory tests in 8-arm radial maze at 3rd, 6th, 9th, and 12th month. 1H magnetic resonance spectroscopy was employed to measure concentrations of tNAA (marker of neuronal integrity) at one month and one year, whereas MRI was used to evaluate hippocampal volumes. Obese rats (OBRs) consumed similar amount of calories as CONs, but less proteins. However, their protein intake was within recommended amounts. Throughout the experiment OBRs had statistically higher concentrations of blood ketone bodies than CONs, but still within normal values. At post-mortem assessment, OBRs had 38% larger fat deposits than CONs (p<0.05), as evaluated by volume of epididymis fat, an acknowledged marker of fat deposits in rats. Contrary to our expectations, OBRs had better scores of memory behavioral tasks than CONs throughout the experiment. At one year, their hippocampi were by 2.6% larger than in CONs (p = 0.05), whereas concentration of tNAA was 9.8% higher (p = 0.014). Long-term HFD in our study resulted in better memory, larger hippocampal volumes, as well as higher hippocampal metabolite concentrations, possibly due to increased levels of blood ketone bodies. The results should be interpreted with caution, as results from animal models do not necessarily directly translate in human condition.

Cargo/Logistics Airlift System Study (CLASS), Volume 1

NASA Technical Reports Server (NTRS)

Norman, J. M.; Henderson, R. D.; Macey, F. C.; Tuttle, R. P.

1978-01-01

Current and advanced air cargo systems are evaluated using industrial and consumer statistics. Market and commodity characteristics that influence the use of the air mode are discussed along with a comparison of air and surface mode on typical routes. Results of on-site surveys of cargo processing facilities at airports are presented, and institutional controls and influences on air cargo operations are considered.

Insights for Students into Trade and Globalization: Who Wins and Who Loses?

ERIC Educational Resources Information Center

Weiner, David; Mamacos, Peter; Katz, Sherman E.; Rothenberg, Laurence E.

2005-01-01

The tremendous growth of international trade over the past several decades has both affected and been affected by of globalization. The volume of world trade since 1950 has increased twenty-folds-from $320 billion to $6.8 trillion, which exceeds expansion in the rate of production by three times. As a result, consumers around the world now enjoy a…

Commentary on "A Review of e-Learning in Canada"

ERIC Educational Resources Information Center

Schwier, Richard A.

2006-01-01

In this commentary, Richard Schwier draws observations of what he believes are key issues in e-learning that come directly out of "A Review of e-Learning in Canada." However, much of the commentary is consumed by topics that haven't yet generated the volume or type of research necessary to allow the kind of compressed scrutiny that this…

Character-marked furniture made from red alder harvested in southeast Alaska: product perspectives from consumers and retailers

Treesearch

Matthew Bumgardner; David Nicholls; Valerie Barber

2009-01-01

In recent decades. red alder (Alnus rubra Bong.) has become an important Pacific Northwest hardwood in appearance-grade lumber markets, such as exports, furniture, and cabinets. However, red alder generally is a short-lived pioneer species, and small logs can result in proportionally large volumes of lower grade lumber containing numerous visual...

Ground-based digital imagery for tree stem analysis

Treesearch

Neil Clark; Daniel L. Schmoldt; Randolph H. Wynne; Matthew F. Winn; Philip A. Araman

2000-01-01

In the USA, a subset of permanent forest sample plots within each geographic region are intensively measured to obtain estimates of tree volume and products. The detailed field measurements required for this type of sampling are both time consuming and error prone. We are attempting to reduce both of these factors with the aid of a commercially-available solid-state...

Improving strand quality of upland oaks for use in oriented strand board

Treesearch

David B. DeValliance; Jody D. Gray; Shawn T. Grushecky

2013-01-01

Past research estimates that more than 1 million tons of oak logging residues go unused in West Virginia each year. Much research has been done investigating potential products and markets for this underutilized resource. West Virginia is home to an oriented strand board (OSB) producer that consumes large volumes of small diameter, low quality round wood. However, the...

Children's Television Violence; Statement Before the Senate Subcommittee on Communications of the Senate Commerce Committee.

ERIC Educational Resources Information Center

Johnson, Nicholas

The staff of the Surgeon General's report on Television and Social Behavior has given us five volumes of reports documenting television's adverse impact on our children's mental health. Action for Children's Television has pointed out what television executives are doing to make our children into little consumers. These are but small instances in…

OPPT workplan risk assessment 1,3,4,6,7,8-Hexahydro-4,6,6,7,8,8,-hexamethylcyclopenta[g]-2-benzopyran (HHCB) (CASRN 1222-05-5)

EPA Science Inventory

HHCB (Galaxolide) is a synthetic polycyclic musk used as an ingredient in a wide range of consumer products including perfumes, cosmetics, shampoos, lotions, detergents, fabric softeners, and cleaning agents. It is one of the largest-volume chemicals of the polycyclic musks and i...

The Big Payoff: Use of Incentives to Enhance Participation in Web Surveys. IR Applications, Volume 25, February 1, 2010

ERIC Educational Resources Information Center

Wren, Stephanie; Showers, Nancy

2010-01-01

Students are demanding more convenient and less time-consuming forums in which to be engaged in all areas of their education, including sharing their ideas about their educational experiences. Web surveys are more prevalent as a technologically advanced research medium being used throughout higher education. As such, this methodology is proving to…

Thick resist for MEMS processing

NASA Astrophysics Data System (ADS)

Brown, Joe; Hamel, Clifford

2001-11-01

The need for technical innovation is always present in today's economy. Microfabrication methods have evolved in support of the demand for smaller and faster integrated circuits with price performance improvements always in the scope of the manufacturing design engineer. The dispersion of processing technology spans well beyond IC fabrication today with batch fabrication and wafer scale processing lending advantages to MEMES applications from biotechnology to consumer electronics from oil exploration to aerospace. Today the demand for innovative processing techniques that enable technology is apparent where only a few years ago appeared too costly or not reliable. In high volume applications where yield and cost improvements are measured in fractions of a percent it is imperative to have process technologies that produce consistent results. Only a few years ago thick resist coatings were limited to thickness less than 20 microns. Factors such as uniformity, edge bead and multiple coatings made high volume production impossible. New developments in photoresist formulation combined with advanced coating equipment techniques that closely controls process parameters have enable thick photoresist coatings of 70 microns with acceptable uniformity and edge bead in one pass. Packaging of microelectronic and micromechanical devices is often a significant cost factor and a reliability issue for high volume low cost production. Technologies such as flip- chip assembly provide a solution for cost and reliability improvements over wire bond techniques. The processing for such technology demands dimensional control and presents a significant cost savings if it were compatible with mainstream technologies. Thick photoresist layers, with good sidewall control would allow wafer-bumping technologies to penetrate the barriers to yield and production where costs for technology are the overriding issue. Single pass processing is paramount to the manufacturability of packaging technology. Uniformity and edge bead control defined the success of process implementation. Today advanced packaging solutions are created with thick photoresist coatings. The techniques and results will be presented.

In vitro fragmentation efficiency of holmium: yttrium-aluminum-garnet (YAG) laser lithotripsy--a comprehensive study encompassing different frequencies, pulse energies, total power levels and laser fibre diameters.

PubMed

Kronenberg, Peter; Traxer, Olivier

2014-08-01

To assess the fragmentation (ablation) efficiency of laser lithotripsy along a wide range of pulse energies, frequencies, power settings and different laser fibres, in particular to compare high- with low-frequency lithotripsy using a dynamic and innovative testing procedure free from any human interaction bias. An automated laser fragmentation testing system was developed. The unmoving laser fibres fired at the surface of an artificial stone while the stone was moved past at a constant velocity, thus creating a fissure. The lithotripter settings were 0.2-1.2 J pulse energies, 5-40 Hz frequencies, 4-20 W power levels, and 200 and 550 μm core laser fibres. Fissure width, depth, and volume were analysed and comparisons between laser settings, fibres and ablation rates were made. Low frequency-high pulse energy (LoFr-HiPE) settings were (up to six times) more ablative than high frequency-low pulse energy (HiFr-LoPE) at the same power levels (P < 0.001), as they produced deeper (P < 0.01) and wider (P < 0.001) fissures. There were linear correlations between pulse energy and fragmentation volume, fissure width, and fissure depth (all P < 0.001). Total power did not correlate with fragmentation measurements. Laser fibre diameter did not affect fragmentation volume (P = 0.81), except at very low pulse energies (0.2 J), where the large fibre was less efficient (P = 0.015). At the same total power level, LoFr-HiPE lithotripsy was most efficient. Pulse energy was the key variable that drove fragmentation efficiency. Attention must be paid to prevent the formation of time-consuming bulky debris and adapt the lithotripter settings to one's needs. As fibre diameter did not affect fragmentation efficiency, small fibres are preferable due to better scope irrigation and manoeuvrability. © 2013 The Authors. BJU International © 2013 BJU International.

Randomized Controlled Trial of High-Volume Energy Drink Versus Caffeine Consumption on ECG and Hemodynamic Parameters.

PubMed

Fletcher, Emily A; Lacey, Carolyn S; Aaron, Melenie; Kolasa, Mark; Occiano, Andrew; Shah, Sachin A

2017-04-26

Caffeine in doses <400 mg is typically not considered arrhythmogenic, but little is known about the additional ingredients in energy drinks. We evaluated the ECG and blood pressure (BP) effects of high-volume energy drink consumption compared with caffeine alone. This was a randomized, double-blind, controlled, crossover study in 18 young, healthy volunteers. Participants consumed either 946 mL (32 ounces) of energy drink or caffeinated control drink, both of which contained 320 mg of caffeine, separated by a 6-day washout period. ECG, peripheral BP, and central BP measurements were obtained at baseline and 1, 2, 4, 6, and 24 hours post study drink consumption. The time-matched, baseline-adjusted changes were compared. The change in corrected QT interval from baseline in the energy drink arm was significantly higher than the caffeine arm at 2 hours (0.44±18.4 ms versus -10.4±14.8 ms, respectively; P =0.02). The QTc changes were not different at other time points. While both the energy drink and caffeine arms raised systolic BP in a similar fashion initially, the systolic BP was significantly higher at 6 hours when compared with the caffeine arm (4.72±4.67 mm Hg versus 0.83±6.09 mm Hg, respectively; P =0.01). Heart rate, diastolic BP, central systolic BP, and central diastolic BP showed no evidence of a difference between groups at any time point. Post energy drink, augmentation index was lower at 6 hours. The corrected QT interval and systolic BP were significantly higher post high-volume energy drink consumption when compared with caffeine alone. Larger clinical trials validating these findings and evaluation of noncaffeine ingredients within energy drinks are warranted. URL: http://www.clinicaltrials.gov. Unique identifier: NCT02023723. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley.

Subchronic inhalation toxicity of gold nanoparticles

PubMed Central

2011-01-01

Background Gold nanoparticles are widely used in consumer products, including cosmetics, food packaging, beverages, toothpaste, automobiles, and lubricants. With this increase in consumer products containing gold nanoparticles, the potential for worker exposure to gold nanoparticles will also increase. Only a few studies have produced data on the in vivo toxicology of gold nanoparticles, meaning that the absorption, distribution, metabolism, and excretion (ADME) of gold nanoparticles remain unclear. Results The toxicity of gold nanoparticles was studied in Sprague Dawley rats by inhalation. Seven-week-old rats, weighing approximately 200 g (males) and 145 g (females), were divided into 4 groups (10 rats in each group): fresh-air control, low-dose (2.36 × 104 particle/cm3, 0.04 μg/m3), middle-dose (2.36 × 105 particle/cm3, 0.38 μg/m3), and high-dose (1.85 × 106 particle/cm3, 20.02 μg/m3). The animals were exposed to gold nanoparticles (average diameter 4-5 nm) for 6 hours/day, 5 days/week, for 90-days in a whole-body inhalation chamber. In addition to mortality and clinical observations, body weight, food consumption, and lung function were recorded weekly. At the end of the study, the rats were subjected to a full necropsy, blood samples were collected for hematology and clinical chemistry tests, and organ weights were measured. Cellular differential counts and cytotoxicity measurements, such as albumin, lactate dehydrogenase (LDH), and total protein were also monitored in a cellular bronchoalveolar lavage (BAL) fluid. Among lung function test measurements, tidal volume and minute volume showed a tendency to decrease comparing control and dose groups during the 90-days of exposure. Although no statistically significant differences were found in cellular differential counts, histopathologic examination showed minimal alveoli, an inflammatory infiltrate with a mixed cell type, and increased macrophages in the high-dose rats. Tissue distribution of gold nanoparticles showed a dose-dependent accumulation of gold in only lungs and kidneys with a gender-related difference in gold nanoparticles content in kidneys. Conclusions Lungs were the only organ in which there were dose-related changes in both male and female rats. Changes observed in lung histopathology and function in high-dose animals indicate that the highest concentration (20 μg/m3) is a LOAEL and the middle concentration (0.38 μg/m3) is a NOAEL for this study. PMID:21569586

A comparison of drinking behavior using a harmonized methodology (Liq.In 7 ) in six countries.

PubMed

Morin, C; Gandy, J; Moreno, L A; Kavouras, S A; Martinez, H; Salas-Salvadó, J; Guelinckx, I

2018-06-01

To assess drinking occasions (volume and type) according to consumption with food in or outside meals, and location, for six countries. A total of 10,521 participants aged 4-65 years from Argentina, Brazil, China, Indonesia, Mexico and Uruguay completed a validated 7-day fluid intake record. For each drinking event, the volume consumed, the fluid type, the location of intake, and whether the drink was accompanied by food (meal or snack) or not, was recorded. Similar drinking behaviors were found in Mexico and Argentina; fluid intake during meals was 48 and 45% of total fluid intake (TFI), respectively. In Brazil (55%), Indonesia (58%) and China (66%) most fluid was consumed without food. In Uruguay, 34% of TFI was with a main meal, 31% with food between meals and 35% without food. Indonesia had the highest median (25-75th percentile) TFI; 2520 (1750-3347) mL/day, and China the lowest 1138 (818-3347) mL/day. Water was consumed with meals for 37% of Chinese and 87% of Indonesian participants, while the four Latin-American American countries showed a preference for sweet drinks; 54% in Mexico, 67% in Brazil, 55% in Argentina and 59% in Uruguay. Diversity in fluid type was noted when drinking with food between meals. Apart from China, most drinking occasions (> 75%) occurred at home. Three distinct drinking behaviors were identified, namely, drinking with meals, drinking as a stand-alone activity, and a type of 'grazing' (i.e., frequent drinks throughout the day) behavior. Most drinking occasions occurred at home.

When high-volume PCI operators in high-volume hospitals move to lower volume hospitals-Do they still maintain high volume and quality of outcomes?

PubMed

Lu, Tsung-Hsueh; Li, Sheng-Tun; Liang, Fu-Wen; Lee, Jo-Chi; Yin, Wei-Hsian

2017-10-31

The aim of this quasi-experimental study was to examine whether high-volume percutaneous coronary intervention (PCI) operators still maintain high volume and quality of outcomes when they moved to lower volume hospitals. Systematic reviews have indicated that high-volume PCI operators and hospitals have higher quality outcomes. However, little is known on whether high PCI volume and high quality outcomes are mainly due to operator characteristics (i.e., skill and experience) and is portable across organizations or whether it is due to hospital characteristics (i.e., equipment, team, and management system) and is less portable. We used Taiwan National Health Insurance claims data 2000-2012 to identify 98 high-volume PCI operators, 10 of whom moved from one hospital to another during the study period. We compared the PCI volume, risk-adjusted mortality ratio, and major adverse cardiovascular event (MACE) ratio before and after moving. Of the 10 high-volume operators who moved, 6 moved from high- to moderate- or low-volume hospitals, with median annual PCI volumes (interquartile range) of 130 (117-165) in prior hospitals and 54 (46-84) in subsequent hospitals (the hospital the operator moved to), and the remaining 4 moved from high to high-volume hospitals, with median annual PCI volumes (interquartile range) of 151 (133-162) in prior hospitals and 193 (178-239) in subsequent hospitals. No significant differences were observed in the risk-adjusted mortality ratios and MACE ratios between high-volume operators and matched controls before and after moving. High-volume operators cannot maintain high volume when they moved from high to moderate or low-volume hospitals; however, the quality of care is maintained. High PCI volume and high-quality outcomes are less portable and more hospital bound. © 2017 Wiley Periodicals, Inc.

Health safety of main water pipe materials supplied in China market.

PubMed

Lu, Kai; Ding, Liang; Wang, Hong-Wei; Jing, Hai-Ning; Zhao, Xiao-Ning; Lin, Shao-Bin; Li, Ya-Dong; Jin, Yin-Long; Liu, Feng-Mao; Jiang, Shu-Ren

2006-04-01

To assess the health safety of copper, steel and plastic water pipes by field water quality investigations. Four consumers were randomly selected for each type of water pipes. Two consumers of every type of the water pipes had used the water pipes for more than 1 year and the other 2 consumers had used the water pipes for less than 3 months. The terminal volume of tap water in copper and steel water pipes should be not less than 0.1 liter, whereas that in plastic water pipes should be not less than 1 liter. The mean values of the experimental results in the second field water quality investigation of the copper and steel water pipes met the Sanitary Standards for Drinking Water Quality. The items of water sample of the plastic water pipes met the requirements of the Sanitary Standards for Drinking Water Quality. Copper, steel, and plastic pipes can be used as drinking water pipes.

Behavior of urban residents toward the discarding of waste electrical and electronic equipment: a case study in Baoding, China.

PubMed

Li, Jinhui; Liu, Lili; Ren, Junshu; Duan, Huabo; Zheng, Lixia

2012-11-01

The volume of waste electrical and electronic equipment (WEEE) is growing rapidly worldwide, making its management difficult; therefore, this should be improved as a matter of urgency. WEEE includes both essential household appliances [including televisions, refrigerators, and washing machines; but not air conditioners, where the consumption mode is more like information, communication and technology (ICT)] ICT equipment (also called high-tech household appliances). In the present study, Baoding, a medium-sized, prefecture-level city in north central China with a population of 11 million, including 1.1 million urban residents, was selected as a representative city for an investigation of recycling behaviors. A valid sample size of 346 households in Baoding was investigated, and categorized into various income and educational levels. The results showed that the major reason for discarding WEEE was malfunction of the appliance, accounting for 52% of disposals. Surveyed households with either high income or good education were more likely to consume high-tech household appliances, attracted by advanced technology, versatile functions or flexibility of use. Personal computer ownership rates were highest in households with a high income and good education-1.2 and 0.9 per home respectively. WEEE was most often sold to peddlers or hawkers from where the WEEE flowed into the second-hand market to be refurbished or repaired, and then re-sold. However, 56.3% of residents in the college community were in support of charging consumers for disposal and 61.7% were in support of including a disposal surcharge in the purchase price of new products-a percentage approximately three times that for high-income residents. Thus, high educational level appears to be currently the most important factor in raising the potential of a household's willingness to pay for WEEE treatment cost. The findings of this study can be used to develop sound recycling systems for WEEE in mainland China.

Cholesteric Liquid Crystal Based Reflex Color Reflective Displays

NASA Astrophysics Data System (ADS)

Khan, Asad

2012-02-01

Bistable color cholesteric liquid crystal displays are unique LCDs that exhibit high reflectivity, good contrast, extremely low power operation, and are amenable to versatile roll-to-roll manufacturing. The display technology, now branded as Reflex has been in commercialized products since 1996. It has been the subject of extensive research and development globally by a variety of parties in both academic and industrial settings. Today, the display technology is in volume production for applications such as dedicated eWriters (Boogie Board), full color electronic skins (eSkin), and displays for smart cards. The flexibility comes from polymerization induced phase separation using unique materials unparalleled in any other display technology. The blend of monomers, polymers, cross linkers, and other components along with nematic liquid crystals and chiral dopants is created and processed in such ways so as to enable highly efficient manufactrable displays using ultra thin plastic substrates -- often as thin as 50μm. Other significant aspects include full color by stacking or spatial separation, night vision capability, ultra high resolution, as well as active matrix capabilities. Of particular note is the stacking approach of Reflex based displays to show full color. This approach for reflective color displays is unique to this technology. Owing to high transparency in wavelength bands outside the selective reflection band, three primarily color layers can be stacked on top of each other and reflect without interfering with other layers. This highly surprising architecture enables the highest reflectivity of any other reflective electronic color display technology. The optics, architecture, electro-topics, and process techniques will be discussed. This presentation will focus on the physics of the core technology and color, it's evolution from rigid glass based displays to flexible displays, development of products from the paradigm shifting concepts to consumer products and related markets. This is a development that spans a wide space of highly technical development and fundamental science to products and commercialization to enable the entry of the technology into consumer markets.

Student Consumer Knowledge: Results of a Nationwide Test.

ERIC Educational Resources Information Center

Brobeck, Stephen

A nationwide test of consumer knowledge of high school students conducted in 1991 found that seniors are unprepared for critical purchasing decisions needed after they graduate. Random samples of the population, 428 high school seniors, were asked 250 questions about a range of consumer subjects such as credit, checking/saving accounts, auto…

Approaches to Consumer Economic Education.

ERIC Educational Resources Information Center

Diem, Richard A.

1979-01-01

Explains how students in high school social studies should benefit from participation in an economic education program. Presents objectives relating to the consumer in society, consumer rights and responsibilities, and consumer law. A directory of materials and resources concludes the article. (Author/DB)

The Tip of the Iceberg of Misleading Online Advertising Comment on "Trouble Spots in Online Direct-to-Consumer Prescription Drug Promotion: A Content Analysis of FDA Warning Letters".

PubMed

Mintzes, Barbara

2016-02-18

Kim's overview of Food and Drug Administration (FDA) regulatory actions from 2005 to 2014 is a comprehensive analysis of the US regulatory experience with online direct-to-consumer advertising (DTCA) of prescription medicines. This experience is of relevance internationally as online DTCA reaches the English-speaking public globally, despite the illegality of DTCA in most countries. The most common violations were omissions or minimizations of risk information, overstatements of efficacy, unsubstantiated claims, and promotion of unapproved ("off-label") use. Nearly one fourth of violations involved cancer drugs, raising additional concerns about patient vulnerability, limited treatment advance, and high costs. Based on content analyses of online DTCA, these cases likely reflect a small proportion of unbalanced and misleading promotional information available on the web. The FDA is only able to review a small proportion of promotional materials submitted to them, due to limited staffing, and the delay between first posting and regulatory action means that many people may be exposed to messages that are found to be inaccurate and misleading. The sheer volume of online DTCA, combined with the ability for content to shift continually, poses unique regulatory challenges. © 2016 by Kerman University of Medical Sciences.

Environmental contamination of ready meals by polychlorinated biphenyls (PCBs).

PubMed

Adenugba, Adeola A; McMartin, Dena W; Beck, Angus

2012-01-01

The level of polychlorinated biphenyls (PCBs) contamination in ready meals was investigated to determine exposure compared to other foodstuffs. Chilled ready meals from nine categories (ambient, Chinese, Indian, Traditional UK, Italian, American Tex-Mex, Vegetarian and Organic), and three samples within each category were Soxhlet extracted in triplicate with hexane for 24 h, followed by a clean-up on deactivated silica gel. The cleaned extracts were concentrated to 1 ml under N(2) gas and analyzed on gas chromatography mass spectrometry (GC-MS) for 7 target PCBs (congeners 28, 52, 101, 118, 153, 138, and 180). Individual congener concentrations ranged from non-detectable to 0.40 ng g(-1) (wet weight). The cumulative concentration of all congeners (ΣPCBs) ranged between 0.20 and 1.00 ng g(-1) (wet weight). These values translate into exposure levels of less than 1 μg kg(-1)day(-1) for reference men and women of 70 and 57 kg, respectively. This preliminary study demonstrates that ready meals, like many other foods, are contaminated by PCBs and may represent an important route of human exposure given contemporary changes in consumer food choice. Even though low levels of contamination were observed, long-term exposure for population groups consuming a high volume of ready meals may have cause for concern regarding chronic health risks.

A Review of Environmental Occurrence, Fate, Exposure, and Toxicity of Benzothiazoles.

PubMed

Liao, Chunyang; Kim, Un-Jung; Kannan, Kurunthachalam

2018-05-01

Benzothiazole and its derivatives (BTs) are high production volume chemicals that have been used for several decades in a large number of industrial and consumer products, including vulcanization accelerators, corrosion inhibitors, fungicides, herbicides, algicides, and ultraviolet (UV) light stabilizers. Several benzothiazole derivatives are used commercially, and widespread use of these chemicals has led to ubiquitous occurrence in diverse environmental compartments. BTs have been reported to be dermal sensitizers, respiratory tract irritants, endocrine disruptors, carcinogens, and genotoxicants. This article reviews occurrence and fate of a select group of BTs in the environment, as well as human exposure and toxicity. BTs have frequently been found in various environmental matrices at concentrations ranging from sub-ng/L (surface water) to several tens of μg/g (indoor dust). The use of BTs in a number of consumer products, especially in rubber products, has resulted in widespread human exposure. BTs undergo chemical, biological, and photolytic degradation in the environment, creating several transformation products. Of these, 2-thiocyanomethylthio-benzothiazole (2-SCNMeS-BTH) has been shown to be the most toxic. Epidemiological studies have shown excess risks of cancers, including bladder cancer, lung cancer, and leukemia, among rubber factory workers, particularly those exposed to 2-mercapto-benzothiazole (2-SH-BTH). Human exposure to BTs continues to be a concern.

Caffeine, cognitive functioning, and white matter lesions in the elderly: establishing causality from epidemiological evidence

PubMed Central

Ritchie, Karen; Artero, Sylvaine; Portet, Florence; Brickman, Adam; Muraskin, Jordan; Beaino, Ephrem; Ancelin, Marie-Laure; Carrière, Isabelle

2010-01-01

Objective The present study examines the epidemiological evidence for a causal relationship between caffeine consumption and cognitive deterioration in the elderly. Methods A population study of 641 elderly persons examining cognitive functioning, caffeine consumption, magnetic resonance imaging volumetrics and other factors known to affect cognitive performance. Results Our findings demonstrate that the association between caffeine consumption and lower cognitive change over time to be statistically significant for women only, taking into account multiple confounders, to be dose-dependent and temporarily related (caffeine consumption precedes cognitive change). Mean log transformed white matter lesion/cranial volume ratios were found to be significantly lower in women consuming more than 3 units of caffeine per day after adjustment for age (−1.23 SD=0.06) than women consuming 2–3 units (−1.04 SD=0.04) or one unit or less (−1.04 SD=0.07, −35% in cm3 compared to low drinkers). This observation is coherent with biological assumptions that caffeine through adenosine is linked to amyloid accumulation and subsequently white matter lesion formation. Conclusions The significant relationship observed between caffeine intake in women and lower cognitive decline is highly likely to be a true causal relationship and not a spurious association. PMID:20164564

Nanomaterials in consumer's goods: the problems of risk assessment

NASA Astrophysics Data System (ADS)

Gmoshinski, I. V.; Khotimchenko, S. A.

2015-11-01

Nanotechnology and engineered nanomaterials are currently used in wide variety of cosmetic products, while their use in food industry, packaging materials, household chemicals etc. still includes a limited number of items and does not show a significant upward trend. However, the problem of priority nanomaterials associated risks is relevant due to their high production volumes and an constantly growing burden on the environment and population. In accordance with the frequency of use in mass-produced consumer goods, leading priority nanomaterials are silver nanoparticles (NPs) and (by a wide margin) NPs of gold, platinum, and titanium dioxide. Frequency of nanosized silica introduction into food products as a food additive, at the moment, seems to be underestimated, since the use of this nanomaterial is not declared by manufacturers of products and objective control of its content is difficult. Analysis of literature data on toxicological properties of nanomaterials shows that currently accumulated amount of information is sufficient to establish the safe doses of nanosized silver, gold and titanium dioxide. Data have been provided in a series of studies concerning the effect of oral intake of nanosized silica on the condition of laboratory animals, including on the performance of the immune system. The article examines the existing approaches to the assessment of population exposure to priority nanomaterials, characteristics of existing problems and risk management.

High volume nanoscale roll-based imprinting using jet and flash imprint lithography

NASA Astrophysics Data System (ADS)

Ahn, Se Hyun; Miller, Mike; Yang, Shuqiang; Ganapathisubramanian, Maha; Menezes, Marlon; Singh, Vik; Choi, Jin; Xu, Frank; LaBrake, Dwayne; Resnick, Douglas J.; Sreenivasan, S. V.

2013-09-01

Extremely large-area roll-to-roll (R2R) manufacturing on flexible substrates is ubiquitous for applications such as paper and plastic processing. It combines the benefits of high speed and inexpensive substrates to deliver a commodity product at low cost. The challenge is to extend this approach to the realm of nanopatterning and realize similar benefits. In order to achieve low-cost nanopatterning, it is imperative to move toward high-speed imprinting, less complex tools, near zero waste of consumables, and low-cost substrates. We have developed a roll-based J-FIL process and applied it to a technology demonstrator tool, the LithoFlex 100, to fabricate large-area flexible bilayer wire-grid polarizers (WGPs) and high-performance WGPs on rigid glass substrates. Extinction ratios of better than 10,000 are obtained for the glass-based WGPs. Two simulation packages are also employed to understand the effects of pitch, aluminum thickness, and pattern defectivity on the optical performance of the WGP devices. It is determined that the WGPs can be influenced by both clear and opaque defects in the gratings; however, the defect densities are relaxed relative to the requirements of a high-density semiconductor device.

Understanding the role of individual consumer-provider relationships within assertive community treatment.

PubMed

Stanhope, Victoria; Matejkowski, Jason

2010-08-01

The widespread adoption of assertive community treatment has resulted in a shift from an individual model to a team model of case management. The shift has had implications for individual relationships between case managers and consumers, but still little is known about how these relationships develop in teams. This exploratory mixed methods study looked at how case managers and consumers negotiate individual relationships within a team model. Quantitative methods identified high and low service intensity relationships between consumers and case managers and qualitative methods explored and compared these relationships. Consumers in high service intensity relationships described a preference for certain case managers and the burden of working with multiple people. Case managers invested high service intensity relationships with special therapeutic value, articulated the challenges of coordinating care across the team, and utilized team limit setting techniques. In contrast, low service intensity relationships were more likely to reflect integration with the entire team. Findings suggest that teams need to consider how individual relationships enhance care for their consumers and how to nurture these relationships while maintaining the support necessary for case managers and consumers.

Smart DNA Fabrication Using Sound Waves: Applying Acoustic Dispensing Technologies to Synthetic Biology.

PubMed

Kanigowska, Paulina; Shen, Yue; Zheng, Yijing; Rosser, Susan; Cai, Yizhi

2016-02-01

Acoustic droplet ejection (ADE) technology uses focused acoustic energy to transfer nanoliter-scale liquid droplets with high precision and accuracy. This noncontact, tipless, low-volume dispensing technology minimizes the possibility of cross-contamination and potentially reduces the costs of reagents and consumables. To date, acoustic dispensers have mainly been used in screening libraries of compounds. In this paper, we describe the first application of this powerful technology to the rapidly developing field of synthetic biology, for DNA synthesis and assembly at the nanoliter scale using a Labcyte Echo 550 acoustic dispenser. We were able to successfully downscale PCRs and the popular one-pot DNA assembly methods, Golden Gate and Gibson assemblies, from the microliter to the nanoliter scale with high assembly efficiency, which effectively cut the reagent cost by 20- to 100-fold. We envision that acoustic dispensing will become an instrumental technology in synthetic biology, in particular in the era of DNA foundries. © 2015 Society for Laboratory Automation and Screening.

Low cost silicon solar array project: Feasibility of low-cost, high-volume production of silane and pyrolysis of silane to semiconductor-grade silicon

NASA Technical Reports Server (NTRS)

Breneman, W. C.

1978-01-01

Silicon epitaxy analysis of silane produced in the Process Development Unit operating in a completely integrated mode consuming only hydrogen and metallurgical silicon resulted in film resistivities of up to 120 ohms cm N type. Preliminary kinetic studies of dichlorosilane disproportionation in the liquid phase have shown that 11.59% SiH4 is formed at equilibrium after 12 minutes contact time at 56 C. The fluid-bed reactor was operated continuously for 48 hours with a mixture of one percent silane in helium as the fluidizing gas. A high silane pyrolysis efficiency was obtained without the generation of excessive fines. Gas flow conditions near the base of the reactor were unfavorable for maintaining a bubbling bed with good heat transfer characteristics. Consequently, a porous agglomerate formed in the lower portion of the reactor. Dense coherent plating was obtained on the silicon seed particles which had remained fluidizied throughout the experiment.

Differential effect of age on hippocampal subfields assessed using a new high-resolution 3T MR sequence.

PubMed

La Joie, Renaud; Fouquet, Marine; Mézenge, Florence; Landeau, Brigitte; Villain, Nicolas; Mevel, Katell; Pélerin, Alice; Eustache, Francis; Desgranges, Béatrice; Chételat, Gaël

2010-11-01

Recent advances in neuroimaging have highlighted the interest to differentiate hippocampal subfields for cognitive neurosciences and more notably in assessing the effects of normal and pathological aging. The main goal of the present study is to investigate the effects of normal aging onto the volume of the different hippocampal subfields. For this purpose, we developed a new magnetic resonance sequence together with reliable tracing guidelines to assess the volume of different subfields of the hippocampus using a 3 Tesla scanner, and estimated the validity of a simpler and less time-consuming method based on the widely-used automatic Voxel-Based Morphometry (VBM) technique. Three hippocampal regions of interest were delineated on the right and left hippocampi of 50 healthy subjects between 18 and 68 years old corresponding to the CA1, subiculum and other (including CA2-3-4 and Dentate Gyrus) subfields. A strong effect of age was found on the volume of the subiculum only, with a decrease paralleling that of the global gray matter volume, while CA1 and other subfields seemed relatively spared. Although less precise than the ROI-tracing technique, the VBM-based method appeared as a reliable alternative especially to distinguish CA1 and subiculum subfields. Our findings of a specific effect of age on the subiculum are consistent with the developmental hypothesis ("last-in first-out" theory). This contrasts with the predominant vulnerability of the CA1 subfield to Alzheimer's disease reported in several previous studies, suggesting that the assessment of hippocampal subfields may improve the discrimination between normal and pathological aging. Copyright 2010 Elsevier Inc. All rights reserved.

The relationship between consumer insight and provider-consumer agreement regarding consumer's quality of life.

PubMed

Hasson-Ohayon, Ilanit; Roe, David; Kravetz, Shlomo; Levy-Frank, Itamar; Meir, Taly

2011-10-01

This study examined the relationship between insight and mental health consumers and providers agreement regarding consumers rated quality of life (QoL). Seventy mental health consumers and their 23 care providers filled-out parallel questionnaires designed to measure consumer QoL. Consumers' insight was also assessed. For most QoL domains, agreement between consumers and providers was higher for persons with high insight. For the Psychological well being dimension a negative correlation was uncovered for persons with low insight indicating disagreement between consumer and provider. These findings are discussed within the context of the literature on insight and agreement between consumer and provider as related to the therapeutic alliance.

Consumer Education: It's a Basic.

ERIC Educational Resources Information Center

NASSP Curriculum Report, 1980

1980-01-01

The report discusses and defines consumer education for high school students, describes various consumer education school programs, annotates available sources and resources, and notes several issues needing attention. Consumer education is defined as an effort to prepare students for participation in the marketplace by imparting the…

Orbital Spacecraft Consumables Resupply System (OSCRS). Volume 4: Extended study results Part 1: Executive Summary

NASA Technical Reports Server (NTRS)

1987-01-01

The objectives consisted of three major tasks. The first was to establish the definition of Space Station and Orbital Maneuvering Vehicle (OMV) user requirements and interfaces and to evaluate system requirements of a water tanker to be used at the station. The second task is to conduct trade studies of system requirements, hardware/software, and operations to evaluate the effect of automatic operation at the station or remote from the station in consonance with the OMV. The last task is to evaluate automatic refueling concepts and to evaluate the impact to Orbital Spacecraft Consumable Resupply System (OSCRS) concept/design to use expendable launch vehicles (ELV) to place the tank into orbit. Progress in each area is discussed.

The impact of advertising on price and practice volume. A case study of dental markets.

PubMed

Kwon, I W; Safranski, S R; Kim, J H

1993-02-01

Advertising is often considered a catalyst which stimulates competition by communicating the important attributes (information) of goods and services to consumers. Theoretically, advertising makes demand responsive to strategic price differences. This advertisement-induced price elasticity puts competitive pressure on the providers' pricing strategy. It has been assumed that this effect also exists in the health care market. This study investigates the impact that the advertising of services has on the price and demand behaviour in the dental care market. The sampling frame includes 1,326 dentists, 558 (44.3%) of whom have advertised their services. The statistical results seem to dispute the claim that advertising lowers the consumer's price and increases the advertising dentist's market share.

Concentration and drug prices in the retail market for malaria treatment in rural Tanzania.

PubMed

Goodman, Catherine; Kachur, S Patrick; Abdulla, Salim; Bloland, Peter; Mills, Anne

2009-06-01

The impact of market concentration has been little studied in markets for ambulatory care in the developing world, where the retail sector often accounts for a high proportion of treatments. This study begins to address this gap through an analysis of the consumer market for malaria treatment in rural areas of three districts in Tanzania. We developed methods for investigating market definition, sales volumes and concentration, and used these to explore the relationship between antimalarial retail prices and competition.The market was strongly geographically segmented and highly concentrated in terms of antimalarial sales. Antimalarial prices were positively associated with market concentration. High antimalarial prices were likely to be an important factor in the low proportion of care-seekers obtaining appropriate treatment.Retail sector distribution of subsidised antimalarials has been proposed to increase the coverage of effective treatment, but this analysis indicates that local market power may prevent such subsidies from being passed on to rural customers. Policymakers should consider the potential to maintain lower retail prices by decreasing concentration among antimalarial providers and recommending retail price levels. Copyright (c) 2009 John Wiley & Sons, Ltd.

A Highly Flexible, Automated System Providing Reliable Sample Preparation in Element- and Structure-Specific Measurements.

PubMed

Vorberg, Ellen; Fleischer, Heidi; Junginger, Steffen; Liu, Hui; Stoll, Norbert; Thurow, Kerstin

2016-10-01

Life science areas require specific sample pretreatment to increase the concentration of the analytes and/or to convert the analytes into an appropriate form for the detection and separation systems. Various workstations are commercially available, allowing for automated biological sample pretreatment. Nevertheless, due to the required temperature, pressure, and volume conditions in typical element and structure-specific measurements, automated platforms are not suitable for analytical processes. Thus, the purpose of the presented investigation was the design, realization, and evaluation of an automated system ensuring high-precision sample preparation for a variety of analytical measurements. The developed system has to enable system adaption and high performance flexibility. Furthermore, the system has to be capable of dealing with the wide range of required vessels simultaneously, allowing for less cost and time-consuming process steps. However, the system's functionality has been confirmed in various validation sequences. Using element-specific measurements, the automated system was up to 25% more precise compared to the manual procedure and as precise as the manual procedure using structure-specific measurements. © 2015 Society for Laboratory Automation and Screening.

CONCENTRATION AND DRUG PRICES IN THE RETAIL MARKET FOR MALARIA TREATMENT IN RURAL TANZANIA

PubMed Central

GOODMAN, CATHERINE; KACHUR, S. PATRICK; ABDULLA, SALIM; BLOLAND, PETER; MILLS, ANNE

2009-01-01

SUMMARY The impact of market concentration has been little studied in markets for ambulatory care in the developing world, where the retail sector often accounts for a high proportion of treatments. This study begins to address this gap through an analysis of the consumer market for malaria treatment in rural areas of three districts in Tanzania. We developed methods for investigating market definition, sales volumes and concentration, and used these to explore the relationship between antimalarial retail prices and competition. The market was strongly geographically segmented and highly concentrated in terms of antimalarial sales. Antimalarial prices were positively associated with market concentration. High antimalarial prices were likely to be an important factor in the low proportion of care seekers obtaining appropriate treatment. Retail sector distribution of subsidised antimalarials has been proposed to increase the coverage of effective treatment, but this analysis indicates that local market power may prevent such subsidies from being passed on to rural customers. Policymakers should consider the potential to maintain lower retail prices by decreasing concentration among antimalarial providers and recommending retail price levels. PMID:19301420

PACS storage technology update: holographic storage.

PubMed

Colang, John E; Johnston, James N

2006-01-01

This paper focuses on the emerging technology of holographic storage and its effect on picture archiving and communication systems (PACS). A review of the emerging technology is presented, which includes a high level description of holographic drives and the associated substrate media, the laser and optical technology, and the spatial light modulator. The potential advantages and disadvantages of holographic drive and storage technology are evaluated. PACS administrators face myriad complex and expensive storage solutions and selecting an appropriate system is time-consuming and costly. Storage technology may become obsolete quickly because of the exponential nature of the advances in digital storage media. Holographic storage may turn out to be a low cost, high speed, high volume storage solution of the future; however, data is inconclusive at this early stage of the technology lifecycle. Despite the current lack of quantitative data to support the hypothesis that holographic technology will have a significant effect on PACS and standards of practice, it seems likely from the current information that holographic technology will generate significant efficiencies. This paper assumes the reader has a fundamental understanding of PACS technology.

Cogeneration Technology Alternatives Study (CTAS) Volume 5: Analytical approach and results

NASA Technical Reports Server (NTRS)

1980-01-01

Data and information in the area of advanced energy conversion systems for industrial cogeneration applications in the 1985 to 2000 time period are provided. Six current and thirty-six advanced energy conversion systems were defined and combined with appropriate balance of plant equipment. Twenty-six industrial processes were selected from among the high energy consuming industries to serve as a framework for the study. Each conversion system was analyzed as a cogenerator with each industrial plant. Fuel consumption, costs, and environmental intrusion were evaluated and compared to corresponding traditional values. Various cogeneration strategies were analyzed and both topping and bottoming (using industrial by-product heat) applications were included. The advanced energy conversion technologies indicated reduced fuel consumption, costs, and emissions. Typically fuel energy savings of 10 to 25 percent were predicted compared to traditional on site furnaces and utility electricity. Gas turbines and combined cycles indicated high overall annual cost savings. Steam turbines and gas turbines produced high estimated returns. In some applications, diesels were most efficient. The advanced technologies used coal derived fuels, or coal with advanced fluid bed combustion or on site gasification systems.

Non-Linear Interactions between Consumers and Flow Determine the Probability of Plant Community Dominance on Maine Rocky Shores

PubMed Central

Silliman, Brian R.; McCoy, Michael W.; Trussell, Geoffrey C.; Crain, Caitlin M.; Ewanchuk, Patrick J.; Bertness, Mark D.

2013-01-01

Although consumers can strongly influence community recovery from disturbance, few studies have explored the effects of consumer identity and density and how they may vary across abiotic gradients. On rocky shores in Maine, recent experiments suggest that recovery of plant- or animal- dominated community states is governed by rates of water movement and consumer pressure. To further elucidate the mechanisms of consumer control, we examined the species-specific and density-dependent effects of rocky shore consumers (crabs and snails) on community recovery under both high (mussel dominated) and low flow (plant dominated) conditions. By partitioning the direct impacts of predators (crabs) and grazers (snails) on community recovery across a flow gradient, we found that grazers, but not predators, are likely the primary agent of consumer control and that their impact is highly non-linear. Manipulating snail densities revealed that herbivorous and bull-dozing snails (Littorina littorea) alone can control recovery of high and low flow communities. After ∼1.5 years of recovery, snail density explained a significant amount of the variation in macroalgal coverage at low flow sites and also mussel recovery at high flow sites. These density-dependent grazer effects were were both non-linear and flow-dependent, with low abundance thresholds needed to suppress plant community recovery, and much higher levels needed to control mussel bed development. Our study suggests that consumer density and identity are key in regulating both plant and animal community recovery and that physical conditions can determine the functional forms of these consumer effects. PMID:23940510

Pediatric Biopharmaceutical Classification System: Using Age-Appropriate Initial Gastric Volume.

PubMed

Shawahna, Ramzi

2016-05-01

Development of optimized pediatric formulations for oral administration can be challenging, time consuming, and financially intensive process. Since its inception, the biopharmaceutical classification system (BCS) has facilitated the development of oral drug formulations destined for adults. At least theoretically, the BCS principles are applied also to pediatrics. A comprehensive age-appropriate BCS has not been fully developed. The objective of this work was to provisionally classify oral drugs listed on the latest World Health Organization's Essential Medicines List for Children into an age-appropriate BCS. A total of 38 orally administered drugs were included in this classification. Dose numbers were calculated using age-appropriate initial gastric volume for neonates, 6-month-old infants, and children aging 1 year through adulthood. Using age-appropriate initial gastric volume and British National Formulary age-specific dosing recommendations in the calculation of dose numbers, the solubility classes shifted from low to high in pediatric subpopulations of 12 years and older for amoxicillin, 5 years, 12 years and older for cephalexin, 9 years and older for chloramphenicol, 3-4 years, 9-11 and 15 years and older for diazepam, 18 years and older (adult) for doxycycline and erythromycin, 8 years and older for phenobarbital, 10 years and older for prednisolone, and 15 years and older for trimethoprim. Pediatric biopharmaceutics are not fully understood where several knowledge gaps have been recently emphasized. The current biowaiver criteria are not suitable for safe application in all pediatric populations.

Consumer awareness and interest toward sodium reduction trends in Korea.

PubMed

Kim, Mina K; Lee, Kwang-Geun

2014-07-01

Reduction of dietary sodium intake by lowering amount of sodium in foods is a global industry target. Quantitative information on current consumer knowledge of sodium reduction trends in Korea is unknown. The objective of this study was to quantify the consumer knowledge and awareness of sodium and salt reduction in foods and to characterize consumer interest in health labeling on the food package. Additionally, comparison of consumer knowledge status between Korea and United States was followed. Consumers (n = 289) participated in an internet survey designed to gauge consumer knowledge and attitudes toward dietary sodium, the sodium content in representative food products (n = 27), and their interest toward specific health claims, including sodium labeling. Questions regarding demographics as well as consumption characteristics were asked. Sodium knowledge index and saltiness belief index were calculated based on the number of correct responses regarding the salt level and sodium content in given food products. Kano analysis was conducted to determine the role of nutrition labels in consumer satisfaction with products. Current consumer knowledge on the sodium content in food products was high, and consumers were adept at matching the sodium content with the salty taste intensity of food products. Consumers' knowledge of the relationship between diets high in sodium and an increased risk of developing previously reported sodium-related diseases, such as hypertension, coronary heart disease, kidney disease, and stomach cancer, were also high. Information on the nutrition panel that influences the consumer satisfaction (trans-fat, sodium, ingredient list, and country of origin) as well as adjective-nutrition claim pairs that appeal positively to purchase intent of the product were identified. This work provided the current status of Korean consumer knowledge on the amount of sodium in food and that sodium can be a risk factor of developing chronic diseases. It also provided practical information to food marketers on what consumers like and what they want to see on product labels in Korea. © 2014 Institute of Food Technologists®

Systemic risk and spatiotemporal dynamics of the consumer market of China

NASA Astrophysics Data System (ADS)

Wang, Minggang; Tian, Lixin; Xu, Hua; Li, Weiyu; Du, Ruijin; Dong, Gaogao; Wang, Jie; Gu, Jiani

2017-05-01

The consumer price index (CPI) contains rich information of the consumer market, in order to characterize the essential characteristics of the consumer market of China, a novel method by using complex network theory is proposed to visualizing the evolution and transformation characteristics of correlated modes among the regional consumer markets. CPI data of 31 provinces and cities of China are selected as sample data. Underlying dynamics of time-evolving correlation networks are revealed. A formula to measure the systemic risk in the consumer market is designed. And the correlation modes transmission network of the regional consumer markets is obtained. Numerical simulations show that the consumer market network has co-movement, group-occurring and small-word property. Different regions played different roles in the consumer market of China. The risk in the consumer market presented a decreasing trend from April 2013 but remain at the high level. Different from the stochastic system, the consumer market of China both has the short-range correlation and the long-range correlation. The strength of correlation modes transmission network basically satisfies a power-law distribution. The correlation modes are transferred into each other conveniently, although the consumer market system is highly complicated. The transformation of the correlation patterns of the regional consumer markets mainly revolves around three core correlation modes and each transformation needs to undergo 4 non-core modes.

Intermetallic compounds in 3D integrated circuits technology: a brief review

PubMed Central

Annuar, Syahira; Mahmoodian, Reza; Hamdi, Mohd; Tu, King-Ning

2017-01-01

Abstract The high performance and downsizing technology of three-dimensional integrated circuits (3D-ICs) for mobile consumer electronic products have gained much attention in the microelectronics industry. This has been driven by the utilization of chip stacking by through-Si-via and solder microbumps. Pb-free solder microbumps are intended to replace conventional Pb-containing solder joints due to the rising awareness of environmental preservation. The use of low-volume solder microbumps has led to crucial constraints that cause several reliability issues, including excessive intermetallic compounds (IMCs) formation and solder microbump embrittlement due to IMCs growth. This article reviews technologies related to 3D-ICs, IMCs formation mechanisms and reliability issues concerning IMCs with Pb-free solder microbumps. Finally, future outlook on the potential growth of research in this area is discussed. PMID:29057024

Parametric study of intersatellite CO2 laser data links

NASA Astrophysics Data System (ADS)

Bonek, E.; Lutz, H.

The performance capability of current CO2 laser communication tecnology for intersatellite data links is evaluated. The link parameters, such as the distance, bit rate, ac signal-to-noise ratio, are related to the masses and the prime power requirements of satellite laser terminals using variables like the telescope (antenna) aperture diameter and the transmitted laser power. It is found that high data rates could be readily transmitted with telescopes of the order of only 10 cm in diameter, with the complte laser data terminals weighing between 25 kg and 70 kg and consuming prime power in the 90-300 W range. In addition, these terminals would require only about 0.1 cu m or less of volume and a very low movable antenna mass, which would alleviate constraints on satellite attitude control units in remote sensing missions.

The Health Care System Under French National Health Insurance: Lessons for Health Reform in the United States

PubMed Central

Rodwin, Victor G.

2003-01-01

The French health system combines universal coverage with a public–private mix of hospital and ambulatory care and a higher volume of service provision than in the United States. Although the system is far from perfect, its indicators of health status and consumer satisfaction are high; its expenditures, as a share of gross domestic product, are far lower than in the United States; and patients have an extraordinary degree of choice among providers. Lessons for the United States include the importance of government’s role in providing a statutory framework for universal health insurance; recognition that piecemeal reform can broaden a partial program (like Medicare) to cover, eventually, the entire population; and understanding that universal coverage can be achieved without excluding private insurers from the supplementary insurance market. PMID:12511380

Consumer Awareness and Willingness to Pay for High-Pressure Processing of Ready-to-Eat Food

ERIC Educational Resources Information Center

Hicks, Doris T.; Pivarnik, Lori F.; McDermott, Ryan; Richard, Nicole; Hoover, Dallas G.; Kniel, Kalmia E.

2009-01-01

Commercial, nonthermal processing of food, such as high hydrostatic-pressure processing (HPP), has increased. The safety and quality of foods produced by HPP has not been well communicated to the public. An online, nationwide consumer survey was implemented to assess awareness of alternative food processing technologies, consumer food safety…

Informed Consumer Choice in Community Rehabilitation Programs

ERIC Educational Resources Information Center

Hagen-Foley, Debra L.; Rosenthal, David A.; Thomas, Dale F.

2005-01-01

This study investigated consumer and staff member perceptions regarding the extent of consumer choice and participatory planning in community-based rehabilitation programs (CRPs) and the relationship between these elements, satisfaction, and outcomes. Consumers reported moderate to high levels of choice in services and employment goals, and…

Intermediate-consumer identity and resources alter a food web with omnivory.

PubMed

Kneitel, Jamie M

2007-07-01

1. Omnivory is an important interaction that has been the centre of numerous theoretical and empirical studies in recent years. Most of these studies examine the conditions necessary for coexistence between an omnivore and an intermediate consumer. Trait variation in ecological interactions (competition and predator tolerance) among intermediate consumers has not been considered in previous empirical studies despite the evidence that variation in species-specific traits can have important community-level effects. 2. I conducted a multifactorial microcosm experiment using species from the Sarracenia purpurea phytotelmata community, organisms that inhabit the water collected within its modified leaves. The basal trophic level consisted of bacterial decomposers, the second trophic level (intermediate consumers) consisted of protozoa and rotifers, and the third trophic level (omnivore) were larvae of the pitcher plant mosquito Wyeomyia smithii. Trophic level number (1, 2 and 3), resources (low and high), omnivore density (low and high) and intermediate consumer (monoculture of five protozoa and rotifers) identity were manipulated. Abundance of the basal trophic level, intermediate consumers, and growth of the omnivore were measured, as well as time to extinction (intermediate consumers) and time to pupation (mosquito larvae). 3. The presence of different intermediate consumers affected both bacteria abundance and omnivore growth. At high resource levels, Poteriochromonas, Colpidium and Habrotrocha rosa reduced bacteria densities greater than omnivore reduction of bacteria. Mosquito larvae did not pupate at low resource levels except when Poteriochromonas and Colopoda were present as intermediate consumers. Communities with H. rosa were the only ones consistent with the prediction that omnivores should exclude intermediate consumers at high resources. 4. These results had mixed support for predictions from omnivory food web theory. Intermediate consumers responded and affected this community differently under different community structures and resource levels. Consequently, variation in species-specific traits can have important population- and community-level effects and needs to be considered in food webs with omnivory.

Development of Metal-Organic Framework for Gaseous Plant Hormone Encapsulation To Manage Ripening of Climacteric Produce.

PubMed

Zhang, Boce; Luo, Yaguang; Kanyuck, Kelsey; Bauchan, Gary; Mowery, Joseph; Zavalij, Peter

2016-06-29

Controlled ripening of climacteric fruits, such as bananas and avocados, is a critical step to provide consumers with high-quality products while reducing postharvest losses. Prior to ripening, these fruits can be stored for an extended period of time but are usually not suitable for consumption. However, once ripening is initiated, they undergo irreversible changes that lead to rapid quality loss and decay if not consumed within a short window of time. Therefore, technologies to slow the ripening process after its onset or to stimulate ripening immediately before consumption are in high demand. In this study, we developed a solid porous metal-organic framework (MOF) to encapsulate gaseous ethylene for subsequent release. We evaluated the feasibility of this technology for on-demand stimulated ripening of bananas and avocados. Copper terephthalate (CuTPA) MOF was synthesized via a solvothermal method and loaded with ethylene gas. Its crystalline structure and chemical composition were characterized by X-ray diffraction crystallography, porosity by N2 and ethylene isotherms, and morphology by electron microscopy. The MOF loaded with ethylene (MOF-ethylene) was placed inside sealed containers with preclimacteric bananas and avocados and stored at 16 °C. The headspace gas composition and fruit color and texture were monitored periodically. Results showed that this CuTPA MOF is highly porous, with a total pore volume of 0.39 cm(3)/g. A 50 mg portion of MOF-ethylene can absorb and release up to 654 μL/L of ethylene in a 4 L container. MOF-ethylene significantly accelerated the ripening-related color and firmness changes of treated bananas and avocados. This result suggests that MOF-ethylene technology could be used for postharvest application to stimulate ripening just before the point of consumption.

Simultaneous Preconcentration and Determination of Brilliant Blue and Sunset Yellow in Foodstuffs by Solid-Phase Extraction Combined UV-Vis Spectrophotometry.

PubMed

Bişgin, Abdullah Taner

2018-05-29

Background: Brilliant Blue and Sunset Yellow, two highly water-soluble synthetic food dyes, are the most popular food dyes used and consumed. Although they are not highly toxic, some health problems can be observed when excessive amounts of food products containing these dyes are consumed. Objectives: The aim of the study was to develop a simultaneous UV-Vis combined solid-phase extraction method, based on the adsorption onto Amberlite XAD-8 resin, for determination of Brilliant Blue and Sunset Yellow dyes. Methods: Sample solution was poured into the reservoir of the column and permitted to gravitationally pass through the column at 2 mL/min flow rate. Adsorbed dyes were eluted to 5 mL of final volume with 1 mol/L HNO₃ in ethanol solution by applying a 2 mL/min flow rate. Dye concentrations of the solution were determined at 483 and 630 nm for Sunset Yellow and Brilliant Blue, respectively. Results: The detection limits of the method for Brilliant Blue and Sunset Yellow were determined as 0.13 and 0.66 ng/mL, respectively. Preconcentration factor was 80. Brilliant Blue contents of real food samples were found to be between 11 and 240 μg/g. Sunset Yellow concentrations of foodstuffs were determined to be between 19 and 331 μg/g. Conclusions: Economical, effective, and simple simultaneous determination of Brilliant Blue and Sunset Yellow was achieved by using a solid-phase extraction combined UV-Vis spectrometry method. Highlights: The method is applicable and suitable for routine analysis in quality control laboratories without the need for expert personnel and high operational costs because the instrumentation is simple and inexpensive.

High Blood Pressure (Hypertension)

MedlinePlus

... For Consumers Consumer Information by Audience For Women High Blood Pressure (Hypertension) Share Tweet Linkedin Pin it More sharing options ... En Español Who is at risk? How is high blood pressure treated? Understanding your blood pressure: What do the ...

A budget of energy transfer in a sustained vocal folds vibration in glottis

NASA Astrophysics Data System (ADS)

Zhang, Lucy; Yang, Jubiao; Krane, Michael

2016-11-01

A set of force and energy balance equations using the control volume approach is derived based on the first principles of physics for a sustained vocal folds vibration in glottis. The control volume analysis is done for compressible airflow in a moving and deforming control volume in the vicinity of the vocal folds. The interaction between laryngeal airflow and vocal folds are successfully simulated using the modified Immersed Finite Element Method (mIFEM), a fully coupled approach to simulate fluid-structure interactions. Detailed mathematical terms are separated out for deeper physical understanding and utilization of mechanical energy is quantified with the derived equation. The results show that majority of energy input is consumed for driving laryngeal airflow, while a smaller portion is for compensating viscous losses in and sustaining the vibration of the vocal folds. We acknowledge the funding support of NIH 2R01DC005642-10A1.

A novel method for blood volume estimation using trivalent chromium in rabbit models.

PubMed

Baby, Prathap Moothamadathil; Kumar, Pramod; Kumar, Rajesh; Jacob, Sanu S; Rawat, Dinesh; Binu, V S; Karun, Kalesh M

2014-05-01

Blood volume measurement though important in management of critically ill-patients is not routinely estimated in clinical practice owing to labour intensive, intricate and time consuming nature of existing methods. The aim was to compare blood volume estimations using trivalent chromium [(51)Cr(III)] and standard Evans blue dye (EBD) method in New Zealand white rabbit models and establish correction-factor (CF). Blood volume estimation in 33 rabbits was carried out using EBD method and concentration determined using spectrophotometric assay followed by blood volume estimation using direct injection of (51)Cr(III). Twenty out of 33 rabbits were used to find CF by dividing blood volume estimation using EBD with blood volume estimation using (51)Cr(III). CF is validated in 13 rabbits by multiplying it with blood volume estimation values obtained using (51)Cr(III). The mean circulating blood volume of 33 rabbits using EBD was 142.02 ± 22.77 ml or 65.76 ± 9.31 ml/kg and using (51)Cr(III) was estimated to be 195.66 ± 47.30 ml or 89.81 ± 17.88 ml/kg. The CF was found to be 0.77. The mean blood volume of 13 rabbits measured using EBD was 139.54 ± 27.19 ml or 66.33 ± 8.26 ml/kg and using (51)Cr(III) with CF was 152.73 ± 46.25 ml or 71.87 ± 13.81 ml/kg (P = 0.11). The estimation of blood volume using (51)Cr(III) was comparable to standard EBD method using CF. With further research in this direction, we envisage human blood volume estimation using (51)Cr(III) to find its application in acute clinical settings.

Simple Estimation of the Endolymphatic Volume Ratio after Intravenous Administration of a Single-dose of Gadolinium Contrast

PubMed Central

NAGANAWA, Shinji; KANOU, Mai; OHASHI, Toshio; KUNO, Kayao; SONE, Michihiko

2016-01-01

Purpose: To evaluate the feasibility of a simple estimation for the endolymphatic volume ratio (endolymph volume/total lymph volume = %ELvolume) from an area ratio obtained from only one slice (%EL1slice) or from three slices (%EL3slices). The %ELvolume, calculated from a time-consuming measurement on all magnetic resonance (MR) slices, was compared to the %EL1slice and the %EL3slices. Methods: In 40 ears of 20 patients with a clinical suspicion of endolymphatic hydrops, MR imaging was performed 4 hours after intravenous administration of a single dose of gadolinium-based contrast material (IV-SD-GBCM). Using previously reported HYDROPS2-Mi2 MR imaging, the %ELvolume values in the cochlea and the vestibule were measured separately by two observers. The correlations between the %EL1slice or the %EL3slices and the %ELvolume values were evaluated. Results: A strong linear correlation was observed between the %ELvolume and the %EL3slices or the %EL1slice in the cochlea. The Pearson correlation coefficient (r) was 0.968 (3 slices) and 0.965 (1 slice) for observer A, and 0.968 (3 slices) and 0.964 (1 slice) for observer B (P < 0.001, for all). A strong linear correlation was also observed between the %ELvolume and the %EL3slices or the %EL1slice in the vestibule. The Pearson correlation coefficient (r) was 0.980 (3 slices) and 0.953 (1 slice) for observer A, and 0.979 (3 slices) and 0.952 (1 slice) for observer B (P < 0.001, for all). The high intra-class correlation coefficients (0.991–0.997) between the endolymph volume ratios by two observers were observed in both the cochlea and the vestibule for values of the %ELvolume, the %EL3slices and the %EL1slice. Conclusion: The %ELvolume might be easily estimated from the %EL3slices or the %EL1slice. PMID:27001396

A Weight-Loss Diet Including Coffee-Derived Mannooligosaccharides Enhances Adipose Tissue Loss in Overweight Men but Not Women

PubMed Central

St-Onge, Marie-Pierre; Salinardi, Taylor; Herron-Rubin, Kristin; Black, Richard M.

2013-01-01

Mannooligosaccharides (MOS), extracted from coffee, have been shown to promote a decrease in body fat when consumed as part of free-living, weight-maintaining diets. Our objective was to determine if MOS consumption (4 g/day), in conjunction with a weight-loss diet, would lead to greater reductions in adipose tissue compartments than placebo. We conducted a double-blind, placebo-controlled weight-loss study in which 60 overweight men and women consumed study beverages and received weekly group counseling for 12 weeks. Weight and blood pressure were measured weekly, and adipose tissue distribution was assessed at baseline and at end point using magnetic resonance imaging. A total of 54 subjects completed the study. Men consuming the MOS beverage had greater loss of body weight than men consuming the Placebo beverage (−6.0 ± 0.6% vs. −2.3 ± 0.5%, respectively, P < 0.05). Men consuming the MOS beverage also had reductions in total body volume (P < 0.0001), total (P < 0.0001), subcutaneous (P < 0.0001), and visceral (P < 0.05) adipose tissue that were greater than changes observed in those consuming the Placebo beverage. In women, changes in body weight and adipose tissue compartments were not different between groups. Adding coffee-derived MOS to a weight-loss diet enhanced both weight and adipose tissue losses in men, suggesting a potential functional use of MOS for weight management and improvement in adipose tissue distribution. More studies are needed to investigate the apparent gender difference in response to MOS consumption. PMID:21938072

Estimating sales and sales market share from sales rank data for consumer appliances

NASA Astrophysics Data System (ADS)

Touzani, Samir; Van Buskirk, Robert

2016-06-01

Our motivation in this work is to find an adequate probability distribution to fit sales volumes of different appliances. This distribution allows for the translation of sales rank into sales volume. This paper shows that the log-normal distribution and specifically the truncated version are well suited for this purpose. We demonstrate that using sales proxies derived from a calibrated truncated log-normal distribution function can be used to produce realistic estimates of market average product prices, and product attributes. We show that the market averages calculated with the sales proxies derived from the calibrated, truncated log-normal distribution provide better market average estimates than sales proxies estimated with simpler distribution functions.

Calculating regional tissue volume for hyperthermic isolated limb perfusion: Four methods compared.

PubMed

Cecchin, D; Negri, A; Frigo, A C; Bui, F; Zucchetta, P; Bodanza, V; Gregianin, M; Campana, L G; Rossi, C R; Rastrelli, M

2016-12-01

Hyperthermic isolated limb perfusion (HILP) can be performed as an alternative to amputation for soft tissue sarcomas and melanomas of the extremities. Melphalan and tumor necrosis factor-alpha are used at a dosage that depends on the volume of the limb. Regional tissue volume is traditionally measured for the purposes of HILP using water displacement volumetry (WDV). Although this technique is considered the gold standard, it is time-consuming and complicated to implement, especially in obese and elderly patients. The aim of the present study was to compare the different methods described in the literature for calculating regional tissue volume in the HILP setting, and to validate an open source software. We reviewed the charts of 22 patients (11 males and 11 females) who had non-disseminated melanoma with in-transit metastases or sarcoma of the lower limb. We calculated the volume of the limb using four different methods: WDV, tape measurements and segmentation of computed tomography images using Osirix and Oncentra Masterplan softwares. The overall comparison provided a concordance correlation coefficient (CCC) of 0.92 for the calculations of whole limb volume. In particular, when Osirix was compared with Oncentra (validated for volume measures and used in radiotherapy), the concordance was near-perfect for the calculation of the whole limb volume (CCC = 0.99). With methods based on CT the user can choose a reliable plane for segmentation purposes. CT-based methods also provides the opportunity to separate the whole limb volume into defined tissue volumes (cortical bone, fat and water). Copyright © 2016 Elsevier Ltd. All rights reserved.

Energy Drink Use Linked to High-sugar Beverage Intake and BMI among Teens.

PubMed

Williams, Ronald D; Housman, Jeff M; Odum, Mary; Rivera, Alissa E

2017-05-01

We assessed the relationship of energy drink, high-sugar, and low-sugar beverage consumption. Mann-Whitney U, Cohen's d and effect sizes were used to examine data from 1737 adolescents in the United States who participated in the 2014 FLASHE Study. Secondary analysis examined consumption of energy drinks, high- and low-sugar beverages, and adolescents' BMIs. Among adolescents, 13.7% (N = 239) reported past 7-day energy drink consumption. Participants who did not consume energy drinks in the past 7 days were more likely to consume low-sugar beverages of water (p < .001) and milk (p = .046). Consumption of energy drinks was positively related to sweetened fruit drinks (p < .001), pure fruit juice (p = .008), soda (p < .001), and sports drinks (p < .001). Energy drink consumers also reported higher mean BMI (p = .004). Adolescents who consume energy drinks during the past 7 days are more likely to also consume other high-sugar beverages. Whereas those who report no past 7-day use of energy drinks consume higher rates of low- or no-sugar beverages. Health education and prevention efforts to reduce adolescent energy drink consumption may lead to reductions in other high-sugar beverage intake and have a positive impact on obesity rates among adolescents.

Ellicott Creek Basin, New York. Water Resources Development. Phase 2. Volume 2. Appendices.

DTIC Science & Technology

1973-08-01

1 HI" . . .. - 1 240 I 200 a N 160 L 1.20 Comper demand curve consumer surplus $56, 400 Io 080 I " 040 10,000 20,000 30,000 40,000 50,000 60,000...Annual Comper - Doys ELLICOTT CREEK NEW YORK 2000 CAMPER DEMAND CURVE AT THE PROPOSED SANDRIDGE RESERVOIR US. ARMY ENGINEER DISTRICT, BUFFALO TO ACCOMPANY

Soil analysis based on sa,ples withdrawn from different volumes: correlation versus calibration

Treesearch

Lucian Weilopolski; Kurt Johnsen; Yuen Zhang

2010-01-01

Soil, particularly in forests, is replete with spatial variation with respect to soil C. Th e present standard chemical method for soil analysis by dry combustion (DC) is destructive, and comprehensive sampling is labor intensive and time consuming. Th ese, among other factors, are contributing to the development of new methods for soil analysis. Th ese include a near...

A Hidden Cause of Rising Tuition: Tuition Discounting in Public Colleges and Universities. The Progress of Education Reform. Volume 15, Number 4

ERIC Educational Resources Information Center

Gianneschi, Matt; Pingel, Sarah

2014-01-01

Why does tuition increase faster than inflation? And why does tuition continue to increase even when states increase their investments in public colleges and universities? These questions have perplexed policymakers and higher education consumers alike. Though tuition setting can be very complicated, one of the drivers for rising costs is price…

Predicting stem total and assortment volumes in an industrial Pinus taeda L. forest plantation using airborne laser scanning data and random forest

Treesearch

Carlos Alberto Silva; Carine Klauberg; Andrew Thomas Hudak; Lee Alexander Vierling; Wan Shafrina Wan Mohd Jaafar; Midhun Mohan; Mariano Garcia; Antonio Ferraz; Adrian Cardil; Sassan Saatchi

2017-01-01

Improvements in the management of pine plantations result in multiple industrial and environmental benefits. Remote sensing techniques can dramatically increase the efficiency of plantation management by reducing or replacing time-consuming field sampling. We tested the utility and accuracy of combining field and airborne lidar data with Random Forest, a supervised...