Effective Web 2.0 Tools for Your Classroom

ERIC Educational Resources Information Center

Wanago, Nicole

2013-01-01

Technology offers educators an effective student engagement tool that can help students see relevance between what they are learning and the real world. Technology also prepares students to be qualified future employees who are able to work in a highly technical business environment, as well as be critical thinkers and effective communicators.…

Writing in Chemistry: An Effective Learning Tool.

ERIC Educational Resources Information Center

Sherwood, Donna W.; Kovac, Jeffrey

1999-01-01

Presents some general strategies for using writing in chemistry courses based on experiences in developing a systematic approach to using writing as an effective learning tool in chemistry courses, and testing this approach in high-enrollment general chemistry courses at the University of Tennessee-Knoxville. Contains 18 references. (WRM)

Adverse Effects of Nonsystemic Steroids (Inhaled, Intranasal, and Cutaneous): a Review of the Literature and Suggested Monitoring Tool.

PubMed

Gupta, Ratika; Fonacier, Luz S

2016-06-01

Inhaled, intranasal, and cutaneous steroids are prescribed by physicians for a plethora of disease processes including asthma and rhinitis. While the high efficacy of this class of medication is well known, the wide range of adverse effects, both local and systemic, is not well elucidated. It is imperative to monitor total steroid burden in its varied forms as well as tracking for possible side effects that may be caused by a high cumulative dose of steroids. This review article highlights the adverse effects of different steroid modalities as well as suggests a monitoring tool to determine steroid totality and side effects.

Exploring how calorie information and taxes on high-calorie foods influence lunch decisions.

PubMed

Giesen, Janneke C A H; Payne, Collin R; Havermans, Remco C; Jansen, Anita

2011-04-01

The potential combined effects of public policy tools-such as calorie information and taxes on highly caloric foods-on purchasing behavior are rarely studied. Furthermore, these tools are rarely studied in the context of individual differences (eg, dietary restraint), which may play a key role in their effectiveness. The current study tests the combined effects of providing calorie information and increased taxes on the total number of calories purchased for lunch. Furthermore, these public policy tools were investigated in the context of high- and low-restrained eaters. University students (n = 178) had to choose lunch from a menu 3 different times. The prices for the high-calorie foods on the menu increased each time (125% and 150% of base price). In addition, there were 3 between-subject factors: budget (high compared with low), calorie-information (calorie information compared with no calorie information), and dietary restraint. Elasticity analyses show a tax × calorie information interaction. A price increase for the high-calorie foods reduced the percentage of calories chosen for lunch but only in the absence of calorie information. A tax of ≥25% on high-calorie foods may decrease the demand for calories and could be a good policy measure to decrease the prevalence of obesity. However, calorie information seems to interfere with the effect of a tax on high-calorie foods.

Theatre as a Learning Tool.

ERIC Educational Resources Information Center

Goldman, Jeffrey

1991-01-01

Describes the Los Angeles Theatre Center's educational outreach project, "Theatre as a Learning Tool." Discusses the program, its effect on high school students, and the process of providing study guides for the teachers. (PRA)

Acceptability and potential effectiveness of commercial portion control tools amongst people with obesity.

PubMed

Almiron-Roig, Eva; Domínguez, Angélica; Vaughan, David; Solis-Trapala, Ivonne; Jebb, Susan A

2016-12-01

Exposure to large portion sizes is a risk factor for obesity. Specifically designed tableware may modulate how much is eaten and help with portion control. We examined the experience of using a guided crockery set (CS) and a calibrated serving spoon set (SS) by individuals trying to manage their weight. Twenty-nine obese adults who had completed 7-12 weeks of a community weight-loss programme were invited to use both tools for 2 weeks each, in a crossover design, with minimal health professional contact. A paper-based questionnaire was used to collect data on acceptance, perceived changes in portion size, frequency, and type of meal when the tool was used. Scores describing acceptance, ease of use and perceived effectiveness were derived from five-point Likert scales from which binary indicators (high/low) were analysed using logistic regression. Mean acceptance, ease of use and perceived effectiveness were moderate to high (3·7-4·4 points). Tool type did not have an impact on indicators of acceptance, ease of use and perceived effectiveness (P>0·32 for all comparisons); 55 % of participants used the CS on most days v. 21 % for the SS. The CS was used for all meals, whereas the SS was mostly used for evening meals. Self-selected portion sizes increased for vegetables and decreased for chips and potatoes with both tools. Participants rated both tools as equally acceptable, easy to use and with similar perceived effectiveness. Formal trials to evaluate the impact of such tools on weight control are warranted.

3-D Printing as an Effective Educational Tool for MEMS Design and Fabrication

ERIC Educational Resources Information Center

Dahle, Reena; Rasel, Rafiul

2016-01-01

This paper presents a series of course modules developed as a high-impact and cost-effective learning tool for modeling and simulating the microfabrication process and design of microelectromechanical systems (MEMS) devices using three-dimensional (3-D) printing. Microfabrication technology is an established fabrication technique for small and…

Measuring the Quality of Early Childhood Programs--Guidelines for Effective Evaluation Tools.

ERIC Educational Resources Information Center

Epstein, Ann S.

2000-01-01

Summarizes what High/Scope discovered to be the critical characteristics of a comprehensive and valid measure of early childhood program quality. Provides suggestions for how the tool can be used, and highlights with examples. Asserts that the guidelines effectively assess efforts of child development, staff development, and soundness of…

Effects of machining parameters on tool life and its optimization in turning mild steel with brazed carbide cutting tool

NASA Astrophysics Data System (ADS)

Dasgupta, S.; Mukherjee, S.

2016-09-01

One of the most significant factors in metal cutting is tool life. In this research work, the effects of machining parameters on tool under wet machining environment were studied. Tool life characteristics of brazed carbide cutting tool machined against mild steel and optimization of machining parameters based on Taguchi design of experiments were examined. The experiments were conducted using three factors, spindle speed, feed rate and depth of cut each having three levels. Nine experiments were performed on a high speed semi-automatic precision central lathe. ANOVA was used to determine the level of importance of the machining parameters on tool life. The optimum machining parameter combination was obtained by the analysis of S/N ratio. A mathematical model based on multiple regression analysis was developed to predict the tool life. Taguchi's orthogonal array analysis revealed the optimal combination of parameters at lower levels of spindle speed, feed rate and depth of cut which are 550 rpm, 0.2 mm/rev and 0.5mm respectively. The Main Effects plot reiterated the same. The variation of tool life with different process parameters has been plotted. Feed rate has the most significant effect on tool life followed by spindle speed and depth of cut.

Randomized test of an implementation intention-based tool to reduce stress-induced eating.

PubMed

O'Connor, Daryl B; Armitage, Christopher J; Ferguson, Eamonn

2015-06-01

Stress may indirectly contribute to disease (e.g. cardiovascular disease, cancer) by producing deleterious changes to diet. The purpose of this study was to test the effectiveness of a stress management support (SMS) tool to reduce stress-related unhealthy snacking and to promote stress-related healthy snacking. Participants were randomized to complete a SMS tool with instruction to link stressful situations with healthy snack alternatives (experimental) or a SMS tool without a linking instruction (control). On-line daily reports of stressors and snacking were completed for 7 days. Daily stressors were associated with unhealthy snack consumption in the control condition but not in the experimental condition. Participants highly motivated towards healthy eating consumed a greater number of healthy snacks in the experimental condition on stressful days compared to participants in the experimental condition with low and mean levels of motivation. This tool is an effective, theory driven, intervention that helps to protect against stress-induced high-calorie snack consumption.

U.S. Army Social Media Handbook

DTIC Science & Technology

2011-01-01

social media tools allow us to tell their story more effectively . Best of luck as you push forward with...are not actively participating. Social media is highly effective tool to use when reaching out to large communi- ties and audiences. But with this...use social media responsi- bly. WHY USE SOCIAL MEDIA ? Soldiers have always been the Army’s best and most effective messengers. Today, Army social

Influence of water-miscible cutting fluid on tool wear behavior of various coated high-speed steel tools in hobbing

NASA Astrophysics Data System (ADS)

Sato, Yuta; Matsuoka, Hironori; Kubo, Akio; Ono, Hajime; Ryu, Takahiro; Qiu, Hua; Nakae, Takashi; Shuto, Shuichi; Watanabe, Suguru; Anan, Ruito

2017-04-01

This paper deals with the influence of water-miscible cutting fluid on tool life (flank wear) compared with that with dry cutting and water-insoluble cutting oil in hobbing. Experiments were conducted by simulating hobbing by fly tool cutting on a milling machine. The following results were clarified. (1) The water-miscible cutting fluid used in the test prolongs the tool life for TiN-, TiAlN-, TiSiN- and AlCrSiN-coated tools in comparison with that obtained by dry cutting and water-insoluble cutting oil. (2) It was presumed that the tool wear decreases and the tool life is improved by the lubrication effect of the synthetic lubrication additive, mineral oil and sulfuric EP additive contained in the water-miscible cutting fluid, and also by the cooling effect.

Trajectory Assessment and Modification Tools for Next Generation Air Traffic Management Operations

NASA Technical Reports Server (NTRS)

Brasil, Connie; Lee, Paul; Mainini, Matthew; Lee, Homola; Lee, Hwasoo; Prevot, Thomas; Smith, Nancy

2011-01-01

This paper reviews three Next Generation Air Transportation System (NextGen) based high fidelity air traffic control human-in-the-loop (HITL) simulations, with a focus on the expected requirement of enhanced automated trajectory assessment and modification tools to support future air traffic flow management (ATFM) planning positions. The simulations were conducted at the National Aeronautics and Space Administration (NASA) Ames Research Centers Airspace Operations Laboratory (AOL) in 2009 and 2010. The test airspace for all three simulations assumed the mid-term NextGenEn-Route high altitude environment utilizing high altitude sectors from the Kansas City and Memphis Air Route Traffic Control Centers. Trajectory assessment, modification and coordination decision support tools were developed at the AOL in order to perform future ATFM tasks. Overall tool usage results and user acceptability ratings were collected across three areas of NextGen operatoins to evaluate the tools. In addition to the usefulness and usability feedback, feasibility issues, benefits, and future requirements were also addressed. Overall, the tool sets were rated very useful and usable, and many elements of the tools received high scores and were used frequently and successfully. Tool utilization results in all three HITLs showed both user and system benefits including better airspace throughput, reduced controller workload, and highly effective communication protocols in both full Data Comm and mixed-equipage environments.

The Center/TRACON Automation System (CTAS): A video presentation

NASA Technical Reports Server (NTRS)

Green, Steven M.; Freeman, Jeannine

1992-01-01

NASA Ames, working with the FAA, has developed a highly effective set of automation tools for aiding the air traffic controller in traffic management within the terminal area. To effectively demonstrate these tools, the video AAV-1372, entitled 'Center/TRACON Automation System,' was produced. The script to the video is provided along with instructions for its acquisition.

CLICK: The USGS Center for LIDAR Information Coordination & Knowledge

USGS Publications Warehouse

Menig, Jordan C.; Stoker, Jason M.

2007-01-01

While this technology has proven its use as a mapping tool - effective for generating bare earth DEMs at high resolutions (1-3 m) and with high vertical accuracies (15-18 cm) - obstacles remain for its application as a remote sensing tool: * The high cost of collecting LIDAR * The steep learning curve on research and application of using the entire point cloud * The challenges of discovering whether data exist for regions of interest

Developing 21st century skills through the use of student personal learning networks

NASA Astrophysics Data System (ADS)

Miller, Robert D.

This research was conducted to study the development of 21st century communication, collaboration, and digital literacy skills of students at the high school level through the use of online social network tools. The importance of this study was based on evidence high school and college students are not graduating with the requisite skills of communication, collaboration, and digital literacy skills yet employers see these skills important to the success of their employees. The challenge addressed through this study was how high schools can integrate social network tools into traditional learning environments to foster the development of these 21st century skills. A qualitative research study was completed through the use of case study. One high school class in a suburban high performing town in Connecticut was selected as the research site and the sample population of eleven student participants engaged in two sets of interviews and learned through the use social network tools for one semester of the school year. The primary social network tools used were Facebook, Diigo, Google Sites, Google Docs, and Twitter. The data collected and analyzed partially supported the transfer of the theory of connectivism at the high school level. The students actively engaged in collaborative learning and research. Key results indicated a heightened engagement in learning, the development of collaborative learning and research skills, and a greater understanding of how to use social network tools for effective public communication. The use of social network tools with high school students was a positive experience that led to an increased awareness of the students as to the benefits social network tools have as a learning tool. The data supported the continued use of social network tools to develop 21st century communication, collaboration, and digital literacy skills. Future research in this area may explore emerging social network tools as well as the long term impact these tools have on the development of lifelong learning skills and quantitative data linked to student learning.

HISTORICAL ANALYSIS OF ECOLOGICAL EFFECTS: A USEFUL EDUCATIONAL TOOL

EPA Science Inventory

An historical analysis that presents the ecological consequences of development can be a valuable educational tool for citizens, students, and environmental managers. In highly impacted areas, the cumulative impacts of multiple stressors can result in complex environmental condit...

Klamath Falls: High-Power Acoustic Well Stimulation Technology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, Brian

Acoustic well stimulation (AWS) technology uses high-power sonic waves from specific frequency spectra in an attempt to stimulate production in a damaged or low-production wellbore. AWS technology is one of the most promising technologies in the oil and gas industry, but it has proven difficult for the industry to develop an effective downhole prototype. This collaboration between Klamath Falls Inc. and the Rocky Mountain Oilfield Testing Center (RMOTC) included a series of tests using high-power ultrasonic tools to stimulate oil and gas production. Phase I testing was designed and implemented to verify tool functionality, power requirements, and capacity of high-powermore » AWS tools. The purpose of Phase II testing was to validate the production response of wells with marginal production rates to AWS stimulation and to capture and identify any changes in the downhole environment after tool deployment. This final report presents methodology and results.« less

Finite Element Simulations of Micro Turning of Ti-6Al-4V using PCD and Coated Carbide tools

NASA Astrophysics Data System (ADS)

Jagadesh, Thangavel; Samuel, G. L.

2017-02-01

The demand for manufacturing axi-symmetric Ti-6Al-4V implants is increasing in biomedical applications and it involves micro turning process. To understand the micro turning process, in this work, a 3D finite element model has been developed for predicting the tool chip interface temperature, cutting, thrust and axial forces. Strain gradient effect has been included in the Johnson-Cook material model to represent the flow stress of the work material. To verify the simulation results, experiments have been conducted at four different feed rates and at three different cutting speeds. Since titanium alloy has low Young's modulus, spring back effect is predominant for higher edge radius coated carbide tool which leads to the increase in the forces. Whereas, polycrystalline diamond (PCD) tool has smaller edge radius that leads to lesser forces and decrease in tool chip interface temperature due to high thermal conductivity. Tool chip interface temperature increases by increasing the cutting speed, however the increase is less for PCD tool as compared to the coated carbide tool. When uncut chip thickness decreases, there is an increase in specific cutting energy due to material strengthening effects. Surface roughness is higher for coated carbide tool due to ploughing effect when compared with PCD tool. The average prediction error of finite element model for cutting and thrust forces are 11.45 and 14.87 % respectively.

Effect of Tool Offset and Tool Rotational Speed on Enhancing Mechanical Property of Al/Mg Dissimilar FSW Joints

NASA Astrophysics Data System (ADS)

Liang, Zhiyuan; Chen, Ke; Wang, Xiaona; Yao, Junshan; Yang, Qi; Zhang, Lanting; Shan, Aidang

2013-08-01

Friction stir welding (FSW) is a promising solid-state joining technique for producing effective welds between Al alloy and Mg alloy. However, previously reported Al/Mg dissimilar FSW joints generally have limited strength or barely any ductility with relatively high strength, which was blamed on the brittle intermetallics formed during welding. In this study, effective joints with comparably high strength (163 MPa) and large elongation (~6 pct) were obtained. Three crucial/weak zones were identified in the welds: (1) Al/Mg bottom interface (BI) zone that resulted from the insufficient materials' intermixing and interdiffusion; (2) banded structure (BS) zone which contains intermetallic particles possibly formed by constitutional liquation; and (3) softened Al alloy to the retreating side (SAA-RS) zone due to the dissolution and coarsening of the strengthening precipitates. Three fracture modes observed in the tensile specimens perpendicular to the weld seam were found closely related to these zones. Their microstructure evolution with the change of tool rotational speed and tool offset was characterized and the consequent effect on the fracture mode alteration was studied. It turned out that enhancing the strengths of all these zones, but keeping the strength of the SAA lowest, is an effective way for enhancing ductility while keeping comparatively high strength in Al/Mg FSW joints. Also, suggestions for further improving the mechanical property of the Al/Mg dissimilar FSW joints were made accordingly for practical applications.

Visualizing inequality

NASA Astrophysics Data System (ADS)

Eliazar, Iddo

2016-07-01

The study of socioeconomic inequality is of substantial importance, scientific and general alike. The graphic visualization of inequality is commonly conveyed by Lorenz curves. While Lorenz curves are a highly effective statistical tool for quantifying the distribution of wealth in human societies, they are less effective a tool for the visual depiction of socioeconomic inequality. This paper introduces an alternative to Lorenz curves-the hill curves. On the one hand, the hill curves are a potent scientific tool: they provide detailed scans of the rich-poor gaps in human societies under consideration, and are capable of accommodating infinitely many degrees of freedom. On the other hand, the hill curves are a powerful infographic tool: they visualize inequality in a most vivid and tangible way, with no quantitative skills that are required in order to grasp the visualization. The application of hill curves extends far beyond socioeconomic inequality. Indeed, the hill curves are highly effective 'hyperspectral' measures of statistical variability that are applicable in the context of size distributions at large. This paper establishes the notion of hill curves, analyzes them, and describes their application in the context of general size distributions.

Self-sharpening-effect of nickel-diamond coatings sprayed by HVOF

NASA Astrophysics Data System (ADS)

Tillmann, W.; Brinkhoff, A.; Schaak, C.; Zajaczkowski, J.

2017-03-01

The durability of stone working and drilling tools is an increasingly significant requirement in industrial applications. These tools are mainly produced by brazing diamond metal matrix composites inserts to the tool body. These inserts are produced by sintering diamonds and metal powder (e.g. nickel). If the wear is too high, the diamonds will break out of the metal matrix and other diamonds will be uncovered. This effect is called self-sharpening. But diamonds are difficult to handle because of their thermal sensitivity. Due to their high thermal influence, manufacturing costs, and complicate route of manufacturing (first sintering, then brazing), there is a great need for alternative production methods for such tools. One alternative to produce wear-resistant and self-sharpening coatings are thermal spray processes as examined in this paper. An advantage of thermal spray processes is their smaller thermal influence on the diamond, due to the short dwelling time in the flame. To reduce the thermal influence during spraying, nickel coated diamonds were used in the HVOF-process (high velocity oxygen fuel process). The wear resistance was subsequently investigated by means of a standardized ball-on-disc test. Furthermore, a SEM (scanning electron microscope) was used to gain information about the wear-mechanism and the self-sharpening effect of the coating.

Potential sources of variability in mesocosm experiments on the response of phytoplankton to ocean acidification

NASA Astrophysics Data System (ADS)

Moreno de Castro, Maria; Schartau, Markus; Wirtz, Kai

2017-04-01

Mesocosm experiments on phytoplankton dynamics under high CO2 concentrations mimic the response of marine primary producers to future ocean acidification. However, potential acidification effects can be hindered by the high standard deviation typically found in the replicates of the same CO2 treatment level. In experiments with multiple unresolved factors and a sub-optimal number of replicates, post-processing statistical inference tools might fail to detect an effect that is present. We propose that in such cases, data-based model analyses might be suitable tools to unearth potential responses to the treatment and identify the uncertainties that could produce the observed variability. As test cases, we used data from two independent mesocosm experiments. Both experiments showed high standard deviations and, according to statistical inference tools, biomass appeared insensitive to changing CO2 conditions. Conversely, our simulations showed earlier and more intense phytoplankton blooms in modeled replicates at high CO2 concentrations and suggested that uncertainties in average cell size, phytoplankton biomass losses, and initial nutrient concentration potentially outweigh acidification effects by triggering strong variability during the bloom phase. We also estimated the thresholds below which uncertainties do not escalate to high variability. This information might help in designing future mesocosm experiments and interpreting controversial results on the effect of acidification or other pressures on ecosystem functions.

The potential impact of integrated malaria transmission control on entomologic inoculation rate in highly endemic areas.

PubMed

Killeen, G F; McKenzie, F E; Foy, B D; Schieffelin, C; Billingsley, P F; Beier, J C

2000-05-01

We have used a relatively simple but accurate model for predicting the impact of integrated transmission control on the malaria entomologic inoculation rate (EIR) at four endemic sites from across sub-Saharan Africa and the southwest Pacific. The simulated campaign incorporated modestly effective vaccine coverage, bed net use, and larval control. The results indicate that such campaigns would reduce EIRs at all four sites by 30- to 50-fold. Even without the vaccine, 15- to 25-fold reductions of EIR were predicted, implying that integrated control with a few modestly effective tools can meaningfully reduce malaria transmission in a range of endemic settings. The model accurately predicts the effects of bed nets and indoor spraying and demonstrates that they are the most effective tools available for reducing EIR. However, the impact of domestic adult vector control is amplified by measures for reducing the rate of emergence of vectors or the level of infectiousness of the human reservoir. We conclude that available tools, including currently neglected methods for larval control, can reduce malaria transmission intensity enough to alleviate mortality. Integrated control programs should be implemented to the fullest extent possible, even in areas of intense transmission, using simple models as decision-making tools. However, we also conclude that to eliminate malaria in many areas of intense transmission is beyond the scope of methods which developing nations can currently afford. New, cost-effective, practical tools are needed if malaria is ever to be eliminated from highly endemic areas.

Towards making efficient use of household resources for appropriate prevention of malaria: investigating households' ownership, use and expenditures on ITNs and other preventive tools in Southeast Nigeria.

PubMed

Onwujekwe, Obinna; Etiaba, Enyi; Uguru, Nkoli; Uzochukwu, Benjamin; Adjagba, Alex

2014-04-05

Many households own, use and spend money on many malaria preventive tools, some of which are inappropriate and ineffective in preventing malaria. This is despite the promotion of use of effective preventive methods such as Insecticide treated nets (ITNs) and indoor residual house spraying (IRHS). The use of these ineffective methods imposes some economic burden on households with no resultant reduction in the risk of developing malaria. Hence, global and national targets in use of various effective malaria preventive toools are yet to be achieved in Nigeria. This paper presents new evidence on the differential use and expenditures on effective and non-effective malaria preventive methods in Nigeria. Semi-structured interviewer administered pre-tested questionnaire were used to collect data from 500 households from two communities in Enugu state, Nigeria. The two study communities were selected randomly while the households were selected systematically. Information was collected on demography, malaria status of children under 5 within the past month, types of malaria preventive tools used by households and how much was spent on these, the per capita household food expenditure and assets ownership of respondents to determine their socio-economic status. There was high level of ownership of ITNs (73%) and utilization (71.2%), with 40% utilization by children under 5. There were also appreciable high levels of use of other malaria preventive tools such as window and door nets, indoor spray, aerosol spray and cleaning the environment. No significant inequity was found in ownership and utilization of ITNs and in use of other preventive methods across socioeconomic groups. However, households spent a lot of money on other preventive tools and average expenditures were between N0.83-N172 ($0.005-$1.2) The richest households spent the most on window and door nets (P = 0.04). High levels of use and expenditure on ITNs and other malaria preventive tools exist. A programmatic challenge will involve designing ways and means of converting some of the inefficient and inappropriate expenditures on many ineffective malaria preventive tools to proven cost-effective methods such as ITNs and IRHS. This will help to achieve universal coverage with malaria preventive tools.

A study with ESI PAM-STAMP® on the influence of tool deformation on final part quality during a forming process

NASA Astrophysics Data System (ADS)

Vrolijk, Mark; Ogawa, Takayuki; Camanho, Arthur; Biasutti, Manfredi; Lorenz, David

2018-05-01

As a result from the ever increasing demand to produce lighter vehicles, more and more advanced high-strength materials are used in automotive industry. Focusing on sheet metal cold forming processes, these materials require high pressing forces and exhibit large springback after forming. Due to the high pressing forces deformations occur in the tooling geometry, introducing dimensional inaccuracies in the blank and potentially impact the final springback behavior. As a result the tool deformations can have an impact on the final assembly or introduce cosmetic defects. Often several iterations are required in try-out to obtain the required tolerances, with costs going up to as much as 30% of the entire product development cost. To investigate the sheet metal part feasibility and quality, in automotive industry CAE tools are widely used. However, in current practice the influence of the tool deformations on the final part quality is generally neglected and simulations are carried out with rigid tools to avoid drastically increased calculation times. If the tool deformation is analyzed through simulation it is normally done at the end of the drawing prosses, when contact conditions are mapped on the die structure and a static analysis is performed to check the deflections of the tool. But this method does not predict the influence of these deflections on the final quality of the part. In order to take tool deformations into account during drawing simulations, ESI has developed the ability to couple solvers efficiently in a way the tool deformations can be real-time included in the drawing simulation without high increase in simulation time compared to simulations with rigid tools. In this paper a study will be presented which demonstrates the effect of tool deformations on the final part quality.

The Effect of Lower Body Stabilization and Different Writing Tools on Writing Biomechanics in Children with Cerebral Palsy

ERIC Educational Resources Information Center

Cheng, Hsin-Yi Kathy; Lien, Yueh-Ju; Yu, Yu-Chun; Ju, Yan-Ying; Pei, Yu-Cheng; Cheng, Chih-Hsiu; Wu, David Bin-Chia

2013-01-01

A high percentage of children with cerebral palsy (CP) have difficulty keeping up with the handwriting demands at school. Previous studies have addressed the effects of proper sitting and writing tool on writing performance, but less on body biomechanics. The aim of this study was to investigate the influence of lower body stabilization and pencil…

The Effects of the Use of Microsoft Math Tool (Graphical Calculator) Instruction on Students' Performance in Linear Functions

ERIC Educational Resources Information Center

Kissi, Philip Siaw; Opoku, Gyabaah; Boateng, Sampson Kwadwo

2016-01-01

The aim of the study was to investigate the effect of Microsoft Math Tool (graphical calculator) on students' achievement in the linear function. The study employed Quasi-experimental research design (Pre-test Post-test two group designs). A total of ninety-eight (98) students were selected for the study from two different Senior High Schools…

Tool wear of (Ti, Al) N-coated polycrystalline cubic boron nitride compact in cutting of hardened steel

NASA Astrophysics Data System (ADS)

Wada, Tadahiro; Hanyu, Hiroyuki

2017-11-01

Polycrystalline cubic boron nitride compact (cBN) is effective tool material for cutting hardened steel. In addition to coated high speed steel and coated cemented carbide that has long been used for cutting materials, more recently, coated cBN has also been used. In this study, to verify the effectiveness of the (Ti,Al)N-coated cBN, which is formed on the substrate of cBN by the physical vapor deposition method, the hardened steel was turned with the (Ti,Al)N-coated cBN tool at a cutting speed of 3.33, 5.00 m/s, a feed rate of 0.3 mm/rev and a depth of cut of 0.1 mm. Furthermore, the uncoated cBN, which was the substrate of the (Ti,Al)N-coated, was also used. The tool wear of the cBN tools was experimentally investigated. The following results were obtained: (1) The contact area between the rake face and the chip of the (Ti,.Al)N-coated cBN tool was smaller than that of the uncoated cBN tool. (2) The tool wear of the (Ti,Al)N-coated cBN was smaller than that of uncoated cBN. (3) The wear progress of the (Ti,Al)N-coated cBN with the main element phase of the TiCN-Al, was slower than that of the (Ti,Al)N-coated cBN with the main element phase of the TiN-Al. (4) In the case of the high cutting speed of 5.00 m/s, the tool wear of the (Ti,Al)N-coated cBN was also smaller than that of uncoated cBN. The above results clarify that the (Ti,Al)N-coated cBN can be used as a tool material in high feed cutting of hardened steel.

Factors that affect micro-tooling features created by direct printing approach

NASA Astrophysics Data System (ADS)

Kumbhani, Mayur N.

Current market required faster pace production of smaller, better, and improved products in shorter amount of time. Traditional high-rate manufacturing process such as hot embossing, injection molding, compression molding, etc. use tooling to replicate feature on a products. Miniaturization of many product in the field of biomedical, electronics, optical, and microfluidic is occurring on a daily bases. There is a constant need to produce cheaper, and faster tooling, which can be utilize by existing manufacturing processes. Traditionally, in order to manufacture micron size tooling features processes such as micro-machining, Electrical Discharge Machining (EDM), etc. are utilized. Due to a higher difficulty to produce smaller size features, and longer production cycle time, various additive manufacturing approaches are proposed, e.g. selective laser sintering (SLS), inkjet printing (3DP), fused deposition modeling (FDM), etc. were proposed. Most of these approaches can produce net shaped products from different materials such as metal, ceramic, or polymers. Several attempts were made to produce tooling features using additive manufacturing approaches. Most of these produced tooling were not cost effective, and the life cycle of these tooling was reported short. In this research, a method to produce tooling features using direct printing approach, where highly filled feedstock was dispensed on a substrate. This research evaluated different natural binders, such as guar gum, xanthan gum, and sodium carboxymethyl cellulose (NaCMC) and their combinations were evaluated. The best binder combination was then use to evaluate effect of different metal (316L stainless steel (3 mum), 316 stainless steel (45 mum), and 304 stainless steel (45 mum)) particle size on feature quality. Finally, the effect of direct printing process variables such as dispensing tip internal diameter (500 mum, and 333 mum) at different printing speeds were evaluated.

A Focus Group Exploration of Automated Case-Finders to Identify High-Risk Heart Failure Patients Within an Urban Safety Net Hospital.

PubMed

Patterson, Mark E; Miranda, Derick; Schuman, Greg; Eaton, Christopher; Smith, Andrew; Silver, Brad

2016-01-01

Leveraging "big data" as a means of informing cost-effective care holds potential in triaging high-risk heart failure (HF) patients for interventions within hospitals seeking to reduce 30-day readmissions. Explore provider's beliefs and perceptions about using an electronic health record (EHR)-based tool that uses unstructured clinical notes to risk-stratify high-risk heart failure patients. Six providers from an inpatient HF clinic within an urban safety net hospital were recruited to participate in a semistructured focus group. A facilitator led a discussion on the feasibility and value of using an EHR tool driven by unstructured clinical notes to help identify high-risk patients. Data collected from transcripts were analyzed using a thematic analysis that facilitated drawing conclusions clustered around categories and themes. From six categories emerged two themes: (1) challenges of finding valid and accurate results, and (2) strategies used to overcome these challenges. Although employing a tool that uses electronic medical record (EMR) unstructured text as the benchmark by which to identify high-risk patients is efficient, choosing appropriate benchmark groups could be challenging given the multiple causes of readmission. Strategies to mitigate these challenges include establishing clear selection criteria to guide benchmark group composition, and quality outcome goals for the hospital. Prior to implementing into practice an innovative EMR-based case-finder driven by unstructured clinical notes, providers are advised to do the following: (1) define patient quality outcome goals, (2) establish criteria by which to guide benchmark selection, and (3) verify the tool's validity and reliability. Achieving consensus on these issues would be necessary for this innovative EHR-based tool to effectively improve clinical decision-making and in turn, decrease readmissions for high-risk patients.

Tools and techniques for estimating high intensity RF effects

NASA Astrophysics Data System (ADS)

Zacharias, Richard L.; Pennock, Steve T.; Poggio, Andrew J.; Ray, Scott L.

1992-01-01

Tools and techniques for estimating and measuring coupling and component disturbance for avionics and electronic controls are described. A finite-difference-time-domain (FD-TD) modeling code, TSAR, used to predict coupling is described. This code can quickly generate a mesh model to represent the test object. Some recent applications as well as the advantages and limitations of using such a code are described. Facilities and techniques for making low-power coupling measurements and for making direct injection test measurements of device disturbance are also described. Some scaling laws for coupling and device effects are presented. A method for extrapolating these low-power test results to high-power full-system effects are presented.

High Resolution Mesoscale Weather Data Improvement to Spatial Effects for Dose-Rate Contour Plot Predictions

DTIC Science & Technology

2007-03-01

time. This is a very powerful tool in determining fine spatial resolution , as boundary conditions are not only updated at every timestep, but the ...HIGH RESOLUTION MESOSCALE WEATHER DATA IMPROVEMENT TO SPATIAL EFFECTS FOR DOSE-RATE CONTOUR PLOT PREDICTIONS THESIS Christopher P...11 1 HIGH RESOLUTION MESOSCALE WEATHER DATA IMPROVEMENT TO SPATIAL EFFECTS FOR DOSE-RATE CONTOUR PLOT

Understanding online health information: Evaluation, tools, and strategies.

PubMed

Beaunoyer, Elisabeth; Arsenault, Marianne; Lomanowska, Anna M; Guitton, Matthieu J

2017-02-01

Considering the status of the Internet as a prominent source of health information, assessing online health material has become a central issue in patient education. We describe the strategies available to evaluate the characteristics of online health information, including readability, emotional content, understandability, usability. Popular tools used in assessment of readability, emotional content and comprehensibility of online health information were reviewed. Tools designed to evaluate both printed and online material were considered. Readability tools are widely used in online health material evaluation and are highly covariant. Assessment of emotional content of online health-related communications via sentiment analysis tools is becoming more popular. Understandability and usability tools have been developed specifically for health-related material, but each tool has important limitations and has been tested on a limited number of health issues. Despite the availability of numerous assessment tools, their overall reliability differs between readability (high) and understandability (low). Approaches combining multiple assessment tools and involving both quantitative and qualitative observations would optimize assessment strategies. Effective assessment of online health information should rely on mixed strategies combining quantitative and qualitative evaluations. Assessment tools should be selected according to their functional properties and compatibility with target material. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Investigation of the effects of process and geometrical parameters on formability in tube hydroforming using a modular hydroforming tool

NASA Astrophysics Data System (ADS)

Joghan, Hamed Dardaei; Staupendahl, Daniel; Hassan, Hamad ul; Henke, Andreas; Keesser, Thorsten; Legat, Francois; Tekkaya, A. Erman

2018-05-01

Tube hydroforming is one of the most important manufacturing processes for the production of exhaust systems. Tube hydroforming allows generating parts with highly complex geometries with the forming accuracies needed in the automotive sector. This is possible due to the form-closed nature of the production process. One of the main cost drivers is tool manufacturing, which is expensive and time consuming, especially when forming large parts. To cope with the design trend of individuality, which is gaining more and more importance and leads to a high number of product variants, a new flexible tool design was developed. The designed tool offers a high flexibility in manufacturing different shapes and geometries of tubes with just local alterations and relocation of tool segments. The tolerancing problems that segmented tools from the state of the art have are overcome by an innovative and flexible die holder design. The break-even point of this initially more expensive tool design is already overcome when forming more than 4 different tube shapes. Together with an additionally designed rotary hydraulic tube feeding system, a highly adaptable forming setup is generated. To investigate the performance of the developed tool setup, a study on geometrical and process parameters during forming of a spherical dome was done. Austenitic stainless steel (grade 1.4301) tube with a diameter of 40 mm and a thickness of 1.5 mm was used for the investigations. The experimental analyses were supported by finite element simulations and statistical analyses. The results show that the flexible tool setup can efficiently be used to analyze the interaction of the inner pressure, friction, and the location of the spherical dome and demonstrate the high influence of the feeding rate on the formed part.

Remote-Sensing Time Series Analysis, a Vegetation Monitoring Tool

NASA Technical Reports Server (NTRS)

McKellip, Rodney; Prados, Donald; Ryan, Robert; Ross, Kenton; Spruce, Joseph; Gasser, Gerald; Greer, Randall

2008-01-01

The Time Series Product Tool (TSPT) is software, developed in MATLAB , which creates and displays high signal-to- noise Vegetation Indices imagery and other higher-level products derived from remotely sensed data. This tool enables automated, rapid, large-scale regional surveillance of crops, forests, and other vegetation. TSPT temporally processes high-revisit-rate satellite imagery produced by the Moderate Resolution Imaging Spectroradiometer (MODIS) and by other remote-sensing systems. Although MODIS imagery is acquired daily, cloudiness and other sources of noise can greatly reduce the effective temporal resolution. To improve cloud statistics, the TSPT combines MODIS data from multiple satellites (Aqua and Terra). The TSPT produces MODIS products as single time-frame and multitemporal change images, as time-series plots at a selected location, or as temporally processed image videos. Using the TSPT program, MODIS metadata is used to remove and/or correct bad and suspect data. Bad pixel removal, multiple satellite data fusion, and temporal processing techniques create high-quality plots and animated image video sequences that depict changes in vegetation greenness. This tool provides several temporal processing options not found in other comparable imaging software tools. Because the framework to generate and use other algorithms is established, small modifications to this tool will enable the use of a large range of remotely sensed data types. An effective remote-sensing crop monitoring system must be able to detect subtle changes in plant health in the earliest stages, before the effects of a disease outbreak or other adverse environmental conditions can become widespread and devastating. The integration of the time series analysis tool with ground-based information, soil types, crop types, meteorological data, and crop growth models in a Geographic Information System, could provide the foundation for a large-area crop-surveillance system that could identify a variety of plant phenomena and improve monitoring capabilities.

Fabrication Characterization of Solar-Cell Silicon Wafers Using a Circular-Rhombus Tool

NASA Astrophysics Data System (ADS)

Pa, Pai-Shan

2010-01-01

A new recycling fabrication method using a custom-built designed circular-rhombus tool for a process combining of micro-electroetching and electrochemical machining for removal of the surface layers from silicon wafers of solar cells is demonstrated. The low yields of epoxy film and Si3N4 thin-film depositions are important factors in semiconductor production. The aim of the proposed recycling fabrication method is to replace the current approach, which uses strong acid and grinding and may damage the physical structure of silicon wafers and pollute to the environment. A precisely engineered clean production approach for removal of surface microstructure layers from silicon wafers is to develop a mass production system for recycling defective or discarded silicon wafers of solar cells that can reduce pollution and cost. A large diameter cathode of the circular-rhombus tool (with a small gap between the anode and the cathode) corresponds to a high rate of epoxy film removal. A high feed rate of the silicon wafers combined with a high continuous DC electric voltage results in a high removal rate. The high rotational speed of the circular-rhombus tool increases the discharge mobility and improves the removal effect associated with the high feed rate of the workpiece. A small port radius or large end angle of the rhombus anode provides a large discharge space and good removal effect only a short period of time is required to remove the Si3N4 layer and epoxy film easily and cleanly.

78 FR 69839 - Building Technologies Office Prioritization Tool

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... innovative and cost-effective energy saving solutions: Supporting research and development of high impact... Description The tool was designed to inform programmatic decision-making and facilitate the setting of... quantitative analysis to assure only the highest impact measures are the focus of further effort. The approach...

Effect of cutting fluids and cutting conditions on surface integrity and tool wear in turning of Inconel 713C

NASA Astrophysics Data System (ADS)

Hikiji, R.

2018-01-01

The trend toward downsizing of engines helps to increase the number of turbochargers around Europe. As for the turbocharger, the temperature of the exhaust gas is so high that the parts made of nickel base super alloy Inconel 713C are used as high temperature strength metals. External turning of Inconel 713C which is used as the actual automotive parts was carried out. The effect of the cutting fluids and cutting conditions on the surface integrity and tool wear was investigated, considering global environment and cost performance. As a result, in the range of the cutting conditions used this time, when the depth of cut was small, the good surface integrity and tool life were obtained. However, in the case of the large corner radius, it was found that the more the cutting length increased, the more the tool wear increased. When the cutting length is so large, the surface integrity and tool life got worse. As for the cutting fluids, it was found that the synthetic type showed better performance in the surface integrity and tool life than the conventional emulsion. However, it was clear that the large corner radius made the surface roughness and tool life good, but it affected the size error etc. in machining the workpiece held in a cantilever style.

On electrical resistivity of AISI D2 steel during various stages of cryogenic treatment

NASA Astrophysics Data System (ADS)

Lomte, Sachin Vijay; Gogte, Chandrashekhar Laxman; Peshwe, Dilip

2012-06-01

The effect of dislocation densities and residual stresses is well known in tool steels. Measurement of electrical resistivity in order to monitor dislocation densities or residual stresses has seldom been used in investigating the effect of cryogenic treatment on tool steels. Monitoring residual stresses during cryogenic treatment becomes important as it is directly related to changes due to cryogenic treatment of tool steels. For high carbon high chromium (HCHC- AISI D2) steels, not only wear resistance but dimensional stability is an important issue as the steels are extensively used in dies, precision measuring instruments. This work comprises of study of measurement of electrical resistivity of AISI D2 steel at various stages of cryogenic treatment. Use of these measurements in order to assess the dimensional stability of these steels is discussed in this paper.

Hosted Services for Advanced V and V Technologies: An Approach to Achieving Adoption without the Woes of Usage

NASA Technical Reports Server (NTRS)

Koga, Dennis (Technical Monitor); Penix, John; Markosian, Lawrence Z.; OMalley, Owen; Brew, William A.

2003-01-01

Attempts to achieve widespread use of software verification tools have been notably unsuccessful. Even 'straightforward', classic, and potentially effective verification tools such as lint-like tools face limits on their acceptance. These limits are imposed by the expertise required applying the tools and interpreting the results, the high false positive rate of many verification tools, and the need to integrate the tools into development environments. The barriers are even greater for more complex advanced technologies such as model checking. Web-hosted services for advanced verification technologies may mitigate these problems by centralizing tool expertise. The possible benefits of this approach include eliminating the need for software developer expertise in tool application and results filtering, and improving integration with other development tools.

Evaluating the effectiveness of gloves in reducing the hazards of hand-transmitted vibration.

PubMed

Griffin, M J

1998-05-01

A method of evaluating the effectiveness of gloves in reducing the hazards of hand-transmitted vibration is proposed. The glove isolation effectiveness was calculated from: (a) the measured transmissibility of a glove, (b) the vibration spectrum on the handle of a specific tool (or class of tools), and (c) the frequency weighting indicating the degree to which different frequencies of vibration cause injury. With previously reported tool vibration spectra and glove transmissibilities (from 10-1000 Hz), the method was used to test 10 gloves with 20 different powered tools. The frequency weighting for hand-transmitted vibration advocated in British standard 6842 (1987) and international standard 5349 (1986) greatly influences the apparent isolation effectiveness of gloves. With the frequency weighting, the gloves had little effect on the transmission of vibration to the hand from most of the tools. Only for two or three tools (those dominated by high frequency vibration) did any glove provide useful attenuation. Without the frequency weighting, some gloves showed useful attenuation of the vibration on most powered tools. In view of the uncertain effect of the vibration frequency in the causation of disorders from hand-transmitted vibration, it is provisionally suggested that the wearing of a glove by the user of a particular vibratory tool could be encouraged if the glove reduces the transmission of vibration when it is evaluated without the frequency weighting and does not increase the vibration when it is evaluated with the frequency weighting. A current international standard for the measurement and evaluation of the vibration transmitted by gloves can classify a glove as an antivibration glove when it provides no useful attenuation of vibration, whereas a glove providing useful attenuation of vibration on a specific tool can fail the test.

THE POTENTIAL IMPACT OF INTEGRATED MALARIA TRANSMISSION CONTROL ON ENTOMOLOGIC INOCULATION RATE IN HIGHLY ENDEMIC AREAS

PubMed Central

KILLEEN, GERRY F.; McKENZIE, F. ELLIS; FOY, BRIAN D.; SCHIEFFELIN, CATHERINE; BILLINGSLEY, PETER F.; BEIER, JOHN C.

2008-01-01

We have used a relatively simple but accurate model for predicting the impact of integrated transmission control on the malaria entomologic inoculation rate (EIR) at four endemic sites from across sub-Saharan Africa and the southwest Pacific. The simulated campaign incorporated modestly effective vaccine coverage, bed net use, and larval control. The results indicate that such campaigns would reduce EIRs at all four sites by 30- to 50-fold. Even without the vaccine, 15- to 25-fold reductions of EIR were predicted, implying that integrated control with a few modestly effective tools can meaningfully reduce malaria transmission in a range of endemic settings. The model accurately predicts the effects of bed nets and indoor spraying and demonstrates that they are the most effective tools available for reducing EIR. However, the impact of domestic adult vector control is amplified by measures for reducing the rate of emergence of vectors or the level of infectiousness of the human reservoir. We conclude that available tools, including currently neglected methods for larval control, can reduce malaria transmission intensity enough to alleviate mortality. Integrated control programs should be implemented to the fullest extent possible, even in areas of intense transmission, using simple models as decision-making tools. However, we also conclude that to eliminate malaria in many areas of intense transmission is beyond the scope of methods which developing nations can currently afford. New, cost-effective, practical tools are needed if malaria is ever to be eliminated from highly endemic areas. PMID:11289662

Development of an Effective School-Based Financial Management Profile in Malaysia: The Delphi Method Application

ERIC Educational Resources Information Center

Radzi, Norfariza Mohd; Ghani, Muhammad Faizal A.; Siraj, Saedah

2015-01-01

The agenda for national development requires a persistent improvement in education as a tool for creating knowledgeable human capital, highly skilled labour, a high technology society and ultimately a highly civilized nation for the future challenging world. It requires considerable financial and technical investment as well as effective and…

Development of an interpretive simulation tool for the proton radiography technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levy, M. C., E-mail: levymc@stanford.edu; Lawrence Livermore National Laboratory, Livermore, California 94551; Ryutov, D. D.

2015-03-15

Proton radiography is a useful diagnostic of high energy density (HED) plasmas under active theoretical and experimental development. In this paper, we describe a new simulation tool that interacts realistic laser-driven point-like proton sources with three dimensional electromagnetic fields of arbitrary strength and structure and synthesizes the associated high resolution proton radiograph. The present tool’s numerical approach captures all relevant physics effects, including effects related to the formation of caustics. Electromagnetic fields can be imported from particle-in-cell or hydrodynamic codes in a streamlined fashion, and a library of electromagnetic field “primitives” is also provided. This latter capability allows users tomore » add a primitive, modify the field strength, rotate a primitive, and so on, while quickly generating a high resolution radiograph at each step. In this way, our tool enables the user to deconstruct features in a radiograph and interpret them in connection to specific underlying electromagnetic field elements. We show an example application of the tool in connection to experimental observations of the Weibel instability in counterstreaming plasmas, using ∼10{sup 8} particles generated from a realistic laser-driven point-like proton source, imaging fields which cover volumes of ∼10 mm{sup 3}. Insights derived from this application show that the tool can support understanding of HED plasmas.« less

Evaluating the Effectiveness of Web-based Climate Resilience Decision Support Tools: Insights from Coastal New Jersey

NASA Astrophysics Data System (ADS)

Brady, M.; Lathrop, R.; Auermuller, L. M.; Leichenko, R.

2016-12-01

Despite the recent surge of Web-based decision support tools designed to promote resiliency in U.S. coastal communities, to-date there has been no systematic study of their effectiveness. This study demonstrates a method to evaluate important aspects of effectiveness of four Web map tools designed to promote consideration of climate risk information in local decision-making and planning used in coastal New Jersey. In summer 2015, the research team conducted in-depth phone interviews with users of one regulatory and three non-regulatory Web map tools using a semi-structured questionnaire. The interview and analysis design drew from a combination of effectiveness evaluation approaches developed in software and information usability, program evaluation, and management information system (MIS) research. Effectiveness assessment results were further analyzed and discussed in terms of conceptual hierarchy of system objectives defined by respective tool developer and user organizations represented in the study. Insights from the interviews suggest that users rely on Web tools as a supplement to desktop and analog map sources because they provide relevant and up-to-date information in a highly accessible and mobile format. The users also reported relying on multiple information sources and comparison between digital and analog sources for decision support. However, with respect to this decision support benefit, users were constrained by accessibility factors such as lack of awareness and training with some tools, lack of salient information such as planning time horizons associated with future flood scenarios, and environmental factors such as mandates restricting some users to regulatory tools. Perceptions of Web tool credibility seem favorable overall, but factors including system design imperfections and inconsistencies in data and information across platforms limited trust, highlighting a need for better coordination between tools. Contributions of the study include user feedback on web-tool system designs consistent with collaborative methods for enhancing usability and a systematic look at effectiveness that includes both user perspectives and consideration of developer and organizational objectives.

Developing a diagnostic tool for measuring maximum effective temperature within high pressure electrodeless discharges

NASA Astrophysics Data System (ADS)

Whiting, Michael; Preston, Barry; Mucklejohn, Stuart; Santos, Monica; Lister, Graeme

2016-09-01

Here we present an investigation into the feasibility of creating a diagnostic tool for obtaining maximum arc temperature measurements within a high pressure electrodeless discharge; utilizing integrating sphere measurements of optically thin lines emitted from mercury atoms within commercially available high pressure mercury lamp arc tubes. The optically thin lines chosen were 577 nm and 1014 nm from a 250 W high pressure mercury lamp operated at various powers. The effective temperature could be calculated by considering the relative intensities of the two optically thin lines and comparison with the theoretical ratio of the temperature dependent power emitted from the lines derived from the atomic spectral data provided by NIST. The calculations gave effective arc temperatures of 5755, 5804 and 5820 K at 200, 225, 250 W respectively. This method was subsequently used as a basis for determining maximum effective arc temperature within microwave-driven electrodeless discharge capsules, with varying mercury content of 6.07, 9.4 and 12.95 mg within 1 × 10-6 m3 giving maximum effective temperatures of 5163, 4768 and 4715 K respectively at 240 W.

Laser assisted machining: a state of art review

NASA Astrophysics Data System (ADS)

Punugupati, Gurabvaiah; Kandi, Kishore Kumar; Bose, P. S. C.; Rao, C. S. P.

2016-09-01

Difficult-to-cut materials have increasing demand in aerospace and automobile industries due to their high yield stress, high strength to weight ratio, high toughness, high wear resistance, high creep, high corrosion resistivity, ability to retain high strength at high temperature, etc. The machinability of these advanced materials, using conventional methods of machining is typical due to the high temperature and pressure at the cutting zone and tool and properties such as low thermal conductivity, high cutting forces and cutting temperatures makes the materials difficult to machine. Laser assisted machining (LAM) is a new and innovative technique for machining the difficult-to-cut materials. This paper deals with a review on the advances in lasers, tools and the mechanism of machining using LAM and their effects.

High sample throughput genotyping for estimating C-lineage introgression in the dark honeybee: an accurate and cost-effective SNP-based tool.

PubMed

Henriques, Dora; Browne, Keith A; Barnett, Mark W; Parejo, Melanie; Kryger, Per; Freeman, Tom C; Muñoz, Irene; Garnery, Lionel; Highet, Fiona; Jonhston, J Spencer; McCormack, Grace P; Pinto, M Alice

2018-06-04

The natural distribution of the honeybee (Apis mellifera L.) has been changed by humans in recent decades to such an extent that the formerly widest-spread European subspecies, Apis mellifera mellifera, is threatened by extinction through introgression from highly divergent commercial strains in large tracts of its range. Conservation efforts for A. m. mellifera are underway in multiple European countries requiring reliable and cost-efficient molecular tools to identify purebred colonies. Here, we developed four ancestry-informative SNP assays for high sample throughput genotyping using the iPLEX Mass Array system. Our customized assays were tested on DNA from individual and pooled, haploid and diploid honeybee samples extracted from different tissues using a diverse range of protocols. The assays had a high genotyping success rate and yielded accurate genotypes. Performance assessed against whole-genome data showed that individual assays behaved well, although the most accurate introgression estimates were obtained for the four assays combined (117 SNPs). The best compromise between accuracy and genotyping costs was achieved when combining two assays (62 SNPs). We provide a ready-to-use cost-effective tool for accurate molecular identification and estimation of introgression levels to more effectively monitor and manage A. m. mellifera conservatories.

AORN ergonomic tool 7: pushing, pulling, and moving equipment on wheels.

PubMed

Waters, Thomas; Lloyd, John D; Hernandez, Edward; Nelson, Audrey

2011-09-01

Pushing and pulling equipment in and around the OR can place high shear force demands on perioperative team members' shoulder and back muscles and joints. These high forces may lead to work-related musculoskeletal disorders. AORN Ergonomic Tool 7: Pushing, Pulling, and Moving Equipment on Wheels can help perioperative team members assess the risk of pushing and pulling tasks in the perioperative setting. The tool provides evidence-based suggestions about when assistive devices should be used for these tasks and is based on current ergonomic safety concepts, scientific evidence, and knowledge of effective technology and procedures, including equipment and devices for safe patient handling. Published by Elsevier Inc.

High flow rate development: process optimization using megasonic immersion development (MID)

NASA Astrophysics Data System (ADS)

Courboin, Daniel; Choi, Jong Woo; Jung, Sang Hyun; Baek, Seung Hee; Kim, Lee Ju

2004-12-01

In previous study the high impact of development by-products on Critical Dimension (CD) through the microloading effect has been demonstrated for a Novolak resist. In this paper, through further tests involving Chemically Amplified Resist (CAR) and Novolak resist, the microloading effect of development is characterized and tentative mechanism is presented. Megasonic Immersion Development (MID), a high flow rate development technique similar to the Proximity Gap Suction Development (PGSD), was used and compared with spin spray development and puddle development. On TOK IP3600, a Novolak resist, we have explored a wide range of process conditions with MID. Developer temperature was varied from 5°C to 40°C with TMAH developer concentration of 1.9% and 2.38% resulting in an isofocal dose range of 90mJ to 190mJ. Exposure Focus Matrix (EFM) with a specific microloading pattern and resist cross sections were performed. The best conditions are quite far from the standard process advised by the resist supplier. Very nice standing wave profile was obtained at high temperature development. On CAR, JEOL 9000MVII, a 50kV e-beam vector scan tool, and ETEC ALTA 4300, a DUV raster scan tool, were used with different develop process techniques including MID. FujiFilm Arch FEP-171 positive CAR and Sumitomo NEB-22 negative CAR were used on 50kV writing tool. Sumitomo PEK-130 was used on DUV writing tool. FEP-171 and PEK-1300 show microloading effect on high density patterns but not NEB-22. MID shows also improved reproduction of develop features in the chrome and a 20% improvement of CD uniformity. The results of this study seem to indicate that a closer look in their development process is needed for 90nm and 65nm technologies.

Developing Optimized Trajectories Derived from Mission and Thermo-Structural Constraints

NASA Technical Reports Server (NTRS)

Lear, Matthew H.; McGrath, Brian E.; Anderson, Michael P.; Green, Peter W.

2008-01-01

In conjunction with NASA and the Department of Defense, the Johns Hopkins University Applied Physics Laboratory (JHU/APL) has been investigating analytical techniques to address many of the fundamental issues associated with solar exploration spacecraft and high-speed atmospheric vehicle systems. These issues include: thermo-structural response including the effects of thermal management via the use of surface optical properties for high-temperature composite structures; aerodynamics with the effects of non-equilibrium chemistry and gas radiation; and aero-thermodynamics with the effects of material ablation for a wide range of thermal protection system (TPS) materials. The need exists to integrate these discrete tools into a common framework that enables the investigation of interdisciplinary interactions (including analysis tool, applied load, and environment uncertainties) to provide high fidelity solutions. In addition to developing robust tools for the coupling of aerodynamically induced thermal and mechanical loads, JHU/APL has been studying the optimal design of high-speed vehicles as a function of their trajectory. Under traditional design methodology the optimization of system level mission parameters such as range and time of flight is performed independently of the optimization for thermal and mechanical constraints such as stress and temperature. A truly optimal trajectory should optimize over the entire range of mission and thermo-mechanical constraints. Under this research, a framework for the robust analysis of high-speed spacecraft and atmospheric vehicle systems has been developed. It has been built around a generic, loosely coupled framework such that a variety of readily available analysis tools can be used. The methodology immediately addresses many of the current analysis inadequacies and allows for future extension in order to handle more complex problems.

DAnTE: a statistical tool for quantitative analysis of –omics data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Polpitiya, Ashoka D.; Qian, Weijun; Jaitly, Navdeep

2008-05-03

DAnTE (Data Analysis Tool Extension) is a statistical tool designed to address challenges unique to quantitative bottom-up, shotgun proteomics data. This tool has also been demonstrated for microarray data and can easily be extended to other high-throughput data types. DAnTE features selected normalization methods, missing value imputation algorithms, peptide to protein rollup methods, an extensive array of plotting functions, and a comprehensive ANOVA scheme that can handle unbalanced data and random effects. The Graphical User Interface (GUI) is designed to be very intuitive and user friendly.

An online network tool for quality information to answer questions about occupational safety and health: usability and applicability.

PubMed

Rhebergen, Martijn D F; Hulshof, Carel T J; Lenderink, Annet F; van Dijk, Frank J H

2010-10-22

Common information facilities do not always provide the quality information needed to answer questions on health or health-related issues, such as Occupational Safety and Health (OSH) matters. Barriers may be the accessibility, quantity and readability of information. Online Question & Answer (Q&A) network tools, which link questioners directly to experts can overcome some of these barriers. When designing and testing online tools, assessing the usability and applicability is essential. Therefore, the purpose of this study is to assess the usability and applicability of a new online Q&A network tool for answers on OSH questions. We applied a cross-sectional usability test design. Eight occupational health experts and twelve potential questioners from the working population (workers) were purposively selected to include a variety of computer- and internet-experiences. During the test, participants were first observed while executing eight tasks that entailed important features of the tool. In addition, they were interviewed. Through task observations and interviews we assessed applicability, usability (effectiveness, efficiency and satisfaction) and facilitators and barriers in use. Most features were usable, though several could be improved. Most tasks were executed effectively. Some tasks, for example searching stored questions in categories, were not executed efficiently and participants were less satisfied with the corresponding features. Participants' recommendations led to improvements. The tool was found mostly applicable for additional information, to observe new OSH trends and to improve contact between OSH experts and workers. Hosting and support by a trustworthy professional organization, effective implementation campaigns, timely answering and anonymity were seen as important use requirements. This network tool is a promising new strategy for offering company workers high quality information to answer OSH questions. Q&A network tools can be an addition to existing information facilities in the field of OSH, but also to other healthcare fields struggling with how to answer questions from people in practice with high quality information. In the near future, we will focus on the use of the tool and its effects on information and knowledge dissemination.

Development and Validation of a Multidisciplinary Tool for Accurate and Efficient Rotorcraft Noise Prediction (MUTE)

NASA Technical Reports Server (NTRS)

Liu, Yi; Anusonti-Inthra, Phuriwat; Diskin, Boris

2011-01-01

A physics-based, systematically coupled, multidisciplinary prediction tool (MUTE) for rotorcraft noise was developed and validated with a wide range of flight configurations and conditions. MUTE is an aggregation of multidisciplinary computational tools that accurately and efficiently model the physics of the source of rotorcraft noise, and predict the noise at far-field observer locations. It uses systematic coupling approaches among multiple disciplines including Computational Fluid Dynamics (CFD), Computational Structural Dynamics (CSD), and high fidelity acoustics. Within MUTE, advanced high-order CFD tools are used around the rotor blade to predict the transonic flow (shock wave) effects, which generate the high-speed impulsive noise. Predictions of the blade-vortex interaction noise in low speed flight are also improved by using the Particle Vortex Transport Method (PVTM), which preserves the wake flow details required for blade/wake and fuselage/wake interactions. The accuracy of the source noise prediction is further improved by utilizing a coupling approach between CFD and CSD, so that the effects of key structural dynamics, elastic blade deformations, and trim solutions are correctly represented in the analysis. The blade loading information and/or the flow field parameters around the rotor blade predicted by the CFD/CSD coupling approach are used to predict the acoustic signatures at far-field observer locations with a high-fidelity noise propagation code (WOPWOP3). The predicted results from the MUTE tool for rotor blade aerodynamic loading and far-field acoustic signatures are compared and validated with a variation of experimental data sets, such as UH60-A data, DNW test data and HART II test data.

Specification and Design Methodologies for High-Speed Fault-Tolerant Array Algorithms and Structures for VLSI.

DTIC Science & Technology

1987-06-01

evaluation and chip layout planning for VLSI digital systems. A high-level applicative (functional) language, implemented at UCLA, allows combining of...operating system. 2.1 Introduction The complexity of VLSI requires the application of CAD tools at all levels of the design process. In order to be...effective, these tools must be adaptive to the specific design. In this project we studied a design method based on the use of applicative languages

Pressure-induced critical influences on workpiece-tool thermal interaction in high speed dry machining of titanium

NASA Astrophysics Data System (ADS)

Abdel-Aal, H. A.; Mansori, M. El

2012-12-01

Cutting tools are subject to extreme thermal and mechanical loads during operation. The state of loading is intensified in dry cutting environment especially when cutting the so called hard-to-cut-materials. Although, the effect of mechanical loads on tool failure have been extensively studied, detailed studies on the effect of thermal dissipation on the deterioration of the cutting tool are rather scarce. In this paper we study failure of coated carbide tools due to thermal loading. The study emphasizes the role assumed by the thermo-physical properties of the tool material in enhancing or preventing mass attrition of the cutting elements within the tool. It is shown that within a comprehensive view of the nature of conduction in the tool zone, thermal conduction is not solely affected by temperature. Rather it is a function of the so called thermodynamic forces. These are the stress, the strain, strain rate, rate of temperature rise, and the temperature gradient. Although that within such consideration description of thermal conduction is non-linear, it is beneficial to employ such a form because it facilitates a full mechanistic understanding of thermal activation of tool wear.

A method to identify the main mode of machine tool under operating conditions

NASA Astrophysics Data System (ADS)

Wang, Daming; Pan, Yabing

2017-04-01

The identification of the modal parameters under experimental conditions is the most common procedure when solving the problem of machine tool structure vibration. However, the influence of each mode on the machine tool vibration in real working conditions remains unknown. In fact, the contributions each mode makes to the machine tool vibration during machining process are different. In this article, an active excitation modal analysis is applied to identify the modal parameters in operational condition, and the Operating Deflection Shapes (ODS) in frequencies of high level vibration that affect the quality of machining in real working conditions are obtained. Then, the ODS is decomposed by the mode shapes which are identified in operational conditions. So, the contributions each mode makes to machine tool vibration during machining process are got by decomposition coefficients. From the previous steps, we can find out the main modes which effect the machine tool more significantly in working conditions. This method was also verified to be effective by experiments.

Instructional Supervision: Applying Tools and Concepts. 2nd Edition

ERIC Educational Resources Information Center

Zepeda, Sally J.

2007-01-01

The first edition of this book was highly regarded by both professors and students for its practicality and its: (1) coverage of tools & strategies to help supervisors work effectively with teachers; (2) up-to-date approach to clinical supervision which includes teacher portfolios, action research, peer coaching, and other innovative practices;…

Transition Matrices: A Tool to Assess Student Learning and Improve Instruction

ERIC Educational Resources Information Center

Morris, Gary A.; Walter, Paul; Skees, Spencer; Schwartz, Samantha

2017-01-01

This paper introduces a new spreadsheet tool for adoption by high school or college-level physics teachers who use common assessments in a pre-instruction/post-instruction mode to diagnose student learning and teaching effectiveness. The spreadsheet creates a simple matrix that identifies the percentage of students who select each possible…

A systematic review of the use and effectiveness of social media in child health.

PubMed

Hamm, Michele P; Shulhan, Jocelyn; Williams, Gillian; Milne, Andrea; Scott, Shannon D; Hartling, Lisa

2014-06-02

Social media use is highly prevalent among children, youth, and their caregivers, and its use in healthcare is being explored. The objective of this study was to conduct a systematic review to determine: 1) for what purposes social media is being used in child health and its effectiveness; and 2) the attributes of social media tools that may explain how they are or are not effective. We searched Medline, CENTRAL, ERIC, PubMed, CINAHL, Academic Search Complete, Alt Health Watch, Health Source, Communication and Mass Media Complete, Web of Knowledge, and Proquest Dissertation and Theses Database from 2000-2013. We included primary research that evaluated the use of a social media tool, and targeted children, youth, or their families or caregivers. Quality assessment was conducted on all included analytic studies using tools specific to different quantitative designs. We identified 25 studies relevant to child health. The majority targeted adolescents (64%), evaluated social media for health promotion (52%), and used discussion forums (68%). Most often, social media was included as a component of a complex intervention (64%). Due to heterogeneity in conditions, tools, and outcomes, results were not pooled across studies. Attributes of social media perceived to be effective included its use as a distraction in younger children, and its ability to facilitate communication between peers among adolescents. While most authors presented positive conclusions about the social media tool being studied (80%), there is little high quality evidence of improved outcomes to support this claim. This comprehensive review demonstrates that social media is being used for a variety of conditions and purposes in child health. The findings provide a foundation from which clinicians and researchers can build in the future by identifying tools that have been developed, describing how they have been used, and isolating components that have been effective.

A systematic review of the use and effectiveness of social media in child health

PubMed Central

2014-01-01

Background Social media use is highly prevalent among children, youth, and their caregivers, and its use in healthcare is being explored. The objective of this study was to conduct a systematic review to determine: 1) for what purposes social media is being used in child health and its effectiveness; and 2) the attributes of social media tools that may explain how they are or are not effective. Methods We searched Medline, CENTRAL, ERIC, PubMed, CINAHL, Academic Search Complete, Alt Health Watch, Health Source, Communication and Mass Media Complete, Web of Knowledge, and Proquest Dissertation and Theses Database from 2000–2013. We included primary research that evaluated the use of a social media tool, and targeted children, youth, or their families or caregivers. Quality assessment was conducted on all included analytic studies using tools specific to different quantitative designs. Results We identified 25 studies relevant to child health. The majority targeted adolescents (64%), evaluated social media for health promotion (52%), and used discussion forums (68%). Most often, social media was included as a component of a complex intervention (64%). Due to heterogeneity in conditions, tools, and outcomes, results were not pooled across studies. Attributes of social media perceived to be effective included its use as a distraction in younger children, and its ability to facilitate communication between peers among adolescents. While most authors presented positive conclusions about the social media tool being studied (80%), there is little high quality evidence of improved outcomes to support this claim. Conclusions This comprehensive review demonstrates that social media is being used for a variety of conditions and purposes in child health. The findings provide a foundation from which clinicians and researchers can build in the future by identifying tools that have been developed, describing how they have been used, and isolating components that have been effective. PMID:24886048

Nanopore sequencing technology and tools for genome assembly: computational analysis of the current state, bottlenecks and future directions.

PubMed

Senol Cali, Damla; Kim, Jeremie S; Ghose, Saugata; Alkan, Can; Mutlu, Onur

2018-04-02

Nanopore sequencing technology has the potential to render other sequencing technologies obsolete with its ability to generate long reads and provide portability. However, high error rates of the technology pose a challenge while generating accurate genome assemblies. The tools used for nanopore sequence analysis are of critical importance, as they should overcome the high error rates of the technology. Our goal in this work is to comprehensively analyze current publicly available tools for nanopore sequence analysis to understand their advantages, disadvantages and performance bottlenecks. It is important to understand where the current tools do not perform well to develop better tools. To this end, we (1) analyze the multiple steps and the associated tools in the genome assembly pipeline using nanopore sequence data, and (2) provide guidelines for determining the appropriate tools for each step. Based on our analyses, we make four key observations: (1) the choice of the tool for basecalling plays a critical role in overcoming the high error rates of nanopore sequencing technology. (2) Read-to-read overlap finding tools, GraphMap and Minimap, perform similarly in terms of accuracy. However, Minimap has a lower memory usage, and it is faster than GraphMap. (3) There is a trade-off between accuracy and performance when deciding on the appropriate tool for the assembly step. The fast but less accurate assembler Miniasm can be used for quick initial assembly, and further polishing can be applied on top of it to increase the accuracy, which leads to faster overall assembly. (4) The state-of-the-art polishing tool, Racon, generates high-quality consensus sequences while providing a significant speedup over another polishing tool, Nanopolish. We analyze various combinations of different tools and expose the trade-offs between accuracy, performance, memory usage and scalability. We conclude that our observations can guide researchers and practitioners in making conscious and effective choices for each step of the genome assembly pipeline using nanopore sequence data. Also, with the help of bottlenecks we have found, developers can improve the current tools or build new ones that are both accurate and fast, to overcome the high error rates of the nanopore sequencing technology.

[Personnel marketing in anesthesiology. Perception, use and evaluation by the target group].

PubMed

Berlet, T

2015-09-01

The human resources situation in the healthcare system is characterized by a manpower shortage. Recruiting medical staff is of great importance for hospitals and particularly in anesthesiology. Approaching and recruiting staff usually happens through external personnel marketing (PM); however, up until now the efficacy of these PM measures has barely been empirically investigated. The goal of this empirical study was to examine how familiar hospital physicians at varying career levels are with the different tools employed by external PM and how frequently they used as well as rated these tools in terms of benefits. Based on this information, the preferences of medical staff with respect to detailing the workplace of "hospital physician" as well as factors of the hospital's attractiveness as an employer were evaluated. Another aim was to derive recommendations on how to optimize the marketing instruments used for external PM in the healthcare system. In an internet-based survey, 154 female and male physicians were questioned about their knowledge, use and benefit assessment of a total of 43 PM tools. Conventional methods of addressing applicants were commonly used but ranked behind the more personal and direct targeting tools in terms of benefit assessments. Internet-based tools with a conceptual affinity to conventional methods were also highly rated in terms of benefits. In contrast, unconventional methods of addressing applicants were hardly known and were not viewed as being useful. The PM tools from the field of "overall conditions for cooperation in the company" mainly received high to very high benefit assessments. These referred primarily to non-monetary factors, human resource development measures and also to aspects of remuneration. Image-promoting PM tools were rarely assessed as being useful, with the exception of measures aimed at creating personal contact between the hospital or unit/department and applicants or those allowing personal insight into the department's range of activities. The correlation between familiarity with PM tools and positive benefit assessments was low. The results of this PM study can contribute to the development of an effective and efficient conception of PM measures by hospitals. Addressing applicants through traditional job and internet-based advertisements should be supplemented by personalized targeting of potential applicants and innovative targeting instruments must be systematically developed and promoted in order to become effective. It remains questionable whether the target group of external PM can be reached with exclusively or even predominantly image-cultivating measures on behalf of the healthcare company, such as image campaigns. The most effective PM tools create good working conditions and develop factors contributing to the employer's attractiveness. These two tools should be given priority in human resource development also taking material incentives into consideration, all of which support the effective set-up of an employer branding.

Effectiveness of knowledge translation tools addressing multiple high-burden chronic diseases affecting older adults: protocol for a systematic review alongside a realist review

PubMed Central

Kastner, Monika; Perrier, Laure; Hamid, Jemila; Tricco, Andrea C; Cardoso, Roberta; Ivers, Noah M; Liu, Barbara; Marr, Sharon; Holroyd-Leduc, Jayna; Wong, Geoff; Graves, Lisa; Straus, Sharon E

2015-01-01

Introduction The burden of chronic disease is a global phenomenon, particularly among people aged 65 years and older. More than half of older adults have more than one chronic disease and their care is not optimal. Chronic disease management (CDM) tools have the potential to meet this challenge but they are primarily focused on a single disease, which fails to address the growing number of seniors with multiple chronic conditions. Methods and analysis We will conduct a systematic review alongside a realist review to identify effective CDM tools that integrate one or more high-burden chronic diseases affecting older adults and to better understand for whom, under what circumstances, how and why they produce their outcomes. We will search MEDLINE, EMBASE, CINAHL, AgeLine and the Cochrane Library for experimental, quasi-experimental, observational and qualitative studies in any language investigating CDM tools that facilitate optimal disease management in one or more high-burden chronic diseases affecting adults aged ≥65 years. Study selection will involve calibration of reviewers to ensure reliability of screening and duplicate assessment of articles. Data abstraction and risk of bias assessment will also be performed independently. Analysis will include descriptive summaries of study and appraisal characteristics, effectiveness of each CDM tool (meta-analysis if appropriate); and a realist programme theory will be developed and refined to explain the outcome patterns within the included studies. Ethics and dissemination Ethics approval is not required for this study. We anticipate that our findings, pertaining to gaps in care across high-burden chronic diseases affecting seniors and highlighting specific areas that may require more research, will be of interest to a wide range of knowledge users and stakeholders. We will publish and present our findings widely, and also plan more active dissemination strategies such as workshops with our key stakeholders. Trial registration number Our protocol is registered with PROSPERO (registration number CRD42014014489). PMID:25649215

Linking nursing unit's culture to organizational effectiveness: a measurement tool.

PubMed

Casida, Jesus

2008-01-01

Organizational culture consists of the deep underlying assumptions, beliefs, and values that are shared by members of the organization and typically operate unconsciously. The four organizational culture traits of the Denison Organizational Culture Model (DOCM) are characteristics of organizational effectiveness, which include adaptability, involvement, consistency, and mission. Effective organizations demonstrate high levels of the four cultural traits which reflect their ability to balance the dynamic tension between the need for stability and the need for flexibility within the organization. The Denison Organizational Culture Survey (DOCS) is a measurement tool that was founded on the theoretical framework of the DOCM, and in the field of business, is one of the most commonly used tools for measuring organizational culture. The DOCS offers a promising approach to operationalizing and measuring the link between organizational culture and organizational effectiveness in the context of nursing units.

Development of a web-based toolkit to support improvement of care coordination in primary care.

PubMed

Ganz, David A; Barnard, Jenny M; Smith, Nina Z Y; Miake-Lye, Isomi M; Delevan, Deborah M; Simon, Alissa; Rose, Danielle E; Stockdale, Susan E; Chang, Evelyn T; Noël, Polly H; Finley, Erin P; Lee, Martin L; Zulman, Donna M; Cordasco, Kristina M; Rubenstein, Lisa V

2018-05-23

Promising practices for the coordination of chronic care exist, but how to select and share these practices to support quality improvement within a healthcare system is uncertain. This study describes an approach for selecting high-quality tools for an online care coordination toolkit to be used in Veterans Health Administration (VA) primary care practices. We evaluated tools in three steps: (1) an initial screening to identify tools relevant to care coordination in VA primary care, (2) a two-clinician expert review process assessing tool characteristics (e.g. frequency of problem addressed, linkage to patients' experience of care, effect on practice workflow, and sustainability with existing resources) and assigning each tool a summary rating, and (3) semi-structured interviews with VA patients and frontline clinicians and staff. Of 300 potentially relevant tools identified by searching online resources, 65, 38, and 18 remained after steps one, two and three, respectively. The 18 tools cover five topics: managing referrals to specialty care, medication management, patient after-visit summary, patient activation materials, agenda setting, patient pre-visit packet, and provider contact information for patients. The final toolkit provides access to the 18 tools, as well as detailed information about tools' expected benefits, and resources required for tool implementation. Future care coordination efforts can benefit from systematically reviewing available tools to identify those that are high quality and relevant.

Machinability of Green Powder Metallurgy Components: Part I. Characterization of the Influence of Tool Wear

NASA Astrophysics Data System (ADS)

Robert-Perron, Etienne; Blais, Carl; Pelletier, Sylvain; Thomas, Yannig

2007-06-01

The green machining process is an interesting approach for solving the mediocre machining behavior of high-performance powder metallurgy (PM) steels. This process appears as a promising method for extending tool life and reducing machining costs. Recent improvements in binder/lubricant technologies have led to high green strength systems that enable green machining. So far, tool wear has been considered negligible when characterizing the machinability of green PM specimens. This inaccurate assumption may lead to the selection of suboptimum cutting conditions. The first part of this study involves the optimization of the machining parameters to minimize the effects of tool wear on the machinability in turning of green PM components. The second part of our work compares the sintered mechanical properties of components machined in green state with other machined after sintering.

Micro Slot Generation by μ-ED Milling

NASA Astrophysics Data System (ADS)

Dave, H. K.; Mayanak, M. K.; Rajpurohit, S. R.; Mathai, V. J.

2016-08-01

Micro electro discharge machining is one of the most widely used advanced micro machining technique owing to its capability to fabricate micro features on any electrically conductive materials irrespective of its material properties. Despite its wide acceptability, the process is always adversely affected by issues like wear that occurred on the tool electrode, which results into generation of inaccurate features. Micro ED milling, a process variant in which the tool electrode simultaneously rotated and scanned during machining, is reported to have high process efficiency for generation of 3D complicated shapes and features with relatively less electrode wear intensity. In the present study an attempt has been made to study the effect of two process parameters viz. capacitance and scanning speed of tool electrode on end wear that occurs on the tool electrode and overcut of micro slots generated by micro ED milling. The experiment has been conducted on Al 1100 alloy with tungsten electrode having diameter of 300 μm. Results suggest that wear on the tool electrode and overcut of the micro features generated are highly influenced by the level of the capacitance employed during machining. For the parameter usage employed for present study however, no significant effect of variation of scanning speed has been observed on both responses.

Common Effects Methodology for Pesticides

EPA Pesticide Factsheets

EPA is exploring how to build on the substantial high quality science developed under both OPP programs to develop additional tools and approaches to support a consistent and common set of effects characterization methods using best available information.

Writing-to-Learn in High-School Chemistry: The Effects of Using The Science Writing Heuristic to Increase Scientific Literacy

ERIC Educational Resources Information Center

Nurnberg, Denae

2017-01-01

Writing-to-Learn in High-School Chemistry: The Effects of Using the Science Writing Heuristic to Increase Scientific Literacy The purpose of this study was to investigate the effectiveness of using the Science Writing Heuristic (SWH) as an instructional tool to improve academic achievement and writing in the context of scientific literacy. This…

Thermo-Mechanical Effect on Poly Crystalline Boron Nitride Tool Life During Friction Stir Welding (Dwell Period)

NASA Astrophysics Data System (ADS)

Almoussawi, M.; Smith, A. J.

2018-05-01

Poly Crystalline Boron Nitride (PCBN) tool wear during the friction stir welding of high melting alloys is an obstacle to commercialize the process. This work simulates the friction stir welding process and tool wear during the plunge/dwell period of 14.8 mm EH46 thick plate steel. The Computational Fluid Dynamic (CFD) model was used for simulation and the wear of the tool is estimated from temperatures and shear stress profile on the tool surface. Two sets of tool rotational speeds were applied including 120 and 200 RPM. Seven plunge/dwell samples were prepared using PCBN FSW tool, six thermocouples were also embedded around each plunge/dwell case in order to record the temperatures during the welding process. Infinite focus microscopy technique was used to create macrographs for each case. The CFD result has been shown that a shear layer around the tool shoulder and probe-side denoted as thermo-mechanical affected zone (TMAZ) was formed and its size increase with tool rotational speed increase. Maximum peak temperature was also found to increase with tool rotational speed increase. PCBN tool wear under shoulder was found to increase with tool rotational speed increase as a result of tool's binder softening after reaching to a peak temperature exceeds 1250 °C. Tool wear also found to increase at probe-side bottom as a result of high shear stress associated with the decrease in the tool rotational speed. The amount of BN particles revealed by SEM in the TMAZ were compared with the CFD model.

Integrating Learning Services in the Cloud: An Approach That Benefits Both Systems and Learning

ERIC Educational Resources Information Center

Gutiérrez-Carreón, Gustavo; Daradoumis, Thanasis; Jorba, Josep

2015-01-01

Currently there is an increasing trend to implement functionalities that allow for the development of applications based on Cloud computing. In education there are high expectations for Learning Management Systems since they can be powerful tools to foster more effective collaboration within a virtual classroom. Tools can also be integrated with…

Teacher Progress Monitoring of Instructional and Behavioral Management Practices: An Evidence-Based Approach to Improving Classroom Practices

ERIC Educational Resources Information Center

Reddy, Linda A.; Dudek, Christopher M.

2014-01-01

In the era of teacher evaluation and effectiveness, assessment tools that identify and monitor educators' instruction and behavioral management practices are in high demand. The Classroom Strategies Scale (CSS) Observer Form is a multidimensional teacher progress monitoring tool designed to assess teachers' usage of instructional and behavioral…

High-temperature, high-pressure bonding of nested tubular metallic components

DOEpatents

Quinby, T.C.

A tool is described for effecting high-temperature, high-compression bonding between the confronting faces of nested, tubular, metallic components. In a typical application, the tool is used to produce tubular target assemblies for irradiation in nuclear reactors or particle accelerators. The target assembly comprising a uranum foil and an aluninum-alloy substrate. The tool is composed of graphite. It comprises a tubular restraining member in which a mechanically expandable tubular core is mounted to form an annulus. The components to be bonded are mounted in nested relation in the annulus. The expandable core is formed of individually movable, axially elongated segments whose outer faces cooperatively define a cylindrical pressing surface and whose inner faces cooperatively define two opposed, inwardly tapered, axial bores. Tapered rams extend into the bores. The loaded tool is mounted in a conventional hot-press provided with evacuation means, heaters for maintaining its interior at bonding temperature, and hydraulic cylinders for maintaining a selected inwardly directed pressure on the tapered rams. With the hot-press evacuated and the loaded tool at the desired temperature, the cylinders are actuated to apply the selected pressure to the rams. The rams in turn expand the segmented core to maintain the nested components in compression against the restraining member. These conditions are maintained until the confronting faces of the nested components are joined in a continuous, uniform bond characterized by high thermal conductivity.

Leveraging business intelligence to make better decisions: Part I.

PubMed

Reimers, Mona

2014-01-01

Data is the new currency. Business intelligence tools will provide better performing practices with a competitive intelligence advantage that will separate the high performers from the rest of the pack. Given the investments of time and money into our data systems, practice leaders must work to take every advantage and look at the datasets as a potential goldmine of business intelligence decision tools. A fresh look at decision tools created from practice data will create efficiencies and improve effectiveness for end-users and managers.

Application of virtual phase-shifting speckle-interferometry for detection of polymorphism in the Chlamydia trachomatis omp1 gene

NASA Astrophysics Data System (ADS)

Feodorova, Valentina A.; Saltykov, Yury V.; Zaytsev, Sergey S.; Ulyanov, Sergey S.; Ulianova, Onega V.

2018-04-01

Method of phase-shifting speckle-interferometry has been used as a new tool with high potency for modern bioinformatics. Virtual phase-shifting speckle-interferometry has been applied for detection of polymorphism in the of Chlamydia trachomatis omp1 gene. It has been shown, that suggested method is very sensitive to natural genetic mutations as single nucleotide polymorphism (SNP). Effectiveness of proposed method has been compared with effectiveness of the newest bioinformatic tools, based on nucleotide sequence alignment.

The Development and Validation of the Indian Family Violence and Control Scale

PubMed Central

Kalokhe, Ameeta S.; Stephenson, Rob; Kelley, Mary E.; Dunkle, Kristin L.; Paranjape, Anuradha; Solas, Vikram; Karve, Latika; del Rio, Carlos; Sahay, Seema

2016-01-01

The high prevalence of domestic violence (DV) among married women in India and associated negative health repercussions highlight the need for effective prevention strategies and tools to measure the efficacy of such interventions. Literature supporting differing manifestations of DV by culture underscores the need for a culturally-tailored scale to more effectively measure DV in the Indian context. We therefore aimed to develop and validate such a tool, the Indian Family Violence and Control Scale (IFVCS), through a mixed-methods study. The psychometric development of IFVCS is herein discussed. After field pre-testing and expert review, a 63-item questionnaire was administered to a random sample of 630 married women from May-July 2013 in Pune, India. The item response theory approach for binary data to explore the IFVCS structure suggested that IFVCS is reliable, with the majority of items having high (>0.5) and significant factor loadings. Concurrent validity, assessed by comparing responses to IFVCS with the validated, abridged Conflict Tactics Scale-2, was high (r = 0.899, p<0.001) as was the construct validity, demonstrated by its significant association with several established DV correlates. Therefore, initial assessment of the IFVCS psychometric properties suggests that it is an effective tool for measuring DV among married women in India and speaks to its capacity for enhancing understanding of DV epidemiology and for evaluating the effectiveness of future DV interventions. PMID:26824611

The Development and Validation of the Indian Family Violence and Control Scale.

PubMed

Kalokhe, Ameeta S; Stephenson, Rob; Kelley, Mary E; Dunkle, Kristin L; Paranjape, Anuradha; Solas, Vikram; Karve, Latika; del Rio, Carlos; Sahay, Seema

2016-01-01

The high prevalence of domestic violence (DV) among married women in India and associated negative health repercussions highlight the need for effective prevention strategies and tools to measure the efficacy of such interventions. Literature supporting differing manifestations of DV by culture underscores the need for a culturally-tailored scale to more effectively measure DV in the Indian context. We therefore aimed to develop and validate such a tool, the Indian Family Violence and Control Scale (IFVCS), through a mixed-methods study. The psychometric development of IFVCS is herein discussed. After field pre-testing and expert review, a 63-item questionnaire was administered to a random sample of 630 married women from May-July 2013 in Pune, India. The item response theory approach for binary data to explore the IFVCS structure suggested that IFVCS is reliable, with the majority of items having high (>0.5) and significant factor loadings. Concurrent validity, assessed by comparing responses to IFVCS with the validated, abridged Conflict Tactics Scale-2, was high (r = 0.899, p<0.001) as was the construct validity, demonstrated by its significant association with several established DV correlates. Therefore, initial assessment of the IFVCS psychometric properties suggests that it is an effective tool for measuring DV among married women in India and speaks to its capacity for enhancing understanding of DV epidemiology and for evaluating the effectiveness of future DV interventions.

Simulation Evaluation of Controller-Managed Spacing Tools under Realistic Operational Conditions

NASA Technical Reports Server (NTRS)

Callantine, Todd J.; Hunt, Sarah M.; Prevot, Thomas

2014-01-01

Controller-Managed Spacing (CMS) tools have been developed to aid air traffic controllers in managing high volumes of arriving aircraft according to a schedule while enabling them to fly efficient descent profiles. The CMS tools are undergoing refinement in preparation for field demonstration as part of NASA's Air Traffic Management (ATM) Technology Demonstration-1 (ATD-1). System-level ATD-1 simulations have been conducted to quantify expected efficiency and capacity gains under realistic operational conditions. This paper presents simulation results with a focus on CMS-tool human factors. The results suggest experienced controllers new to the tools find them acceptable and can use them effectively in ATD-1 operations.

Finite Element Simulation of Temperature and Strain Distribution during Friction Stir Welding of AA2024 Aluminum Alloy

NASA Astrophysics Data System (ADS)

Jain, Rahul; Pal, Surjya Kanta; Singh, Shiv Brat

2017-02-01

Friction Stir Welding (FSW) is a solid state joining process and is handy for welding aluminum alloys. Finite Element Method (FEM) is an important tool to predict state variables of the process but numerical simulation of FSW is highly complex due to non-linear contact interactions between tool and work piece and interdependency of displacement and temperature. In the present work, a three dimensional coupled thermo-mechanical method based on Lagrangian implicit method is proposed to study the thermal history, strain distribution and thermo-mechanical process in butt welding of Aluminum alloy 2024 using DEFORM-3D software. Workpiece is defined as rigid-visco plastic material and sticking condition between tool and work piece is defined. Adaptive re-meshing is used to tackle high mesh distortion. Effect of tool rotational and welding speed on plastic strain is studied and insight is given on asymmetric nature of FSW process. Temperature distribution on the workpiece and tool is predicted and maximum temperature is found in workpiece top surface.

A tool for assessment of heart failure prescribing quality: A systematic review and meta-analysis.

PubMed

El Hadidi, Seif; Darweesh, Ebtissam; Byrne, Stephen; Bermingham, Margaret

2018-04-16

Heart failure (HF) guidelines aim to standardise patient care. Internationally, prescribing practice in HF may deviate from guidelines and so a standardised tool is required to assess prescribing quality. A systematic review and meta-analysis were performed to identify a quantitative tool for measuring adherence to HF guidelines and its clinical implications. Eleven electronic databases were searched to include studies reporting a comprehensive tool for measuring adherence to prescribing guidelines in HF patients aged ≥18 years. Qualitative studies or studies measuring prescription rates alone were excluded. Study quality was assessed using the Good ReseArch for Comparative Effectiveness Checklist. In total, 2455 studies were identified. Sixteen eligible full-text articles were included (n = 14 354 patients, mean age 69 ± 8 y). The Guideline Adherence Index (GAI), and its modified versions, was the most frequently cited tool (n = 13). Other tools identified were the Individualised Reconciled Evidence Recommendations, the Composite Heart Failure Performance, and the Heart Failure Scale. The meta-analysis included the GAI studies of good to high quality. The average GAI-3 was 62%. Compared to low GAI, high GAI patients had lower mortality rate (7.6% vs 33.9%) and lower rehospitalisation rates (23.5% vs 24.5%); both P ≤ .05. High GAI was associated with reduced risk of mortality (hazard ratio = 0.29, 95% confidence interval, 0.06-0.51) and rehospitalisation (hazard ratio = 0.64, 95% confidence interval, 0.41-1.00). No tool was used to improve prescribing quality. The GAI is the most frequently used tool to assess guideline adherence in HF. High GAI is associated with improved HF outcomes. Copyright © 2018 John Wiley & Sons, Ltd.

Concurrent Design used in the Design of Space Instruments

NASA Technical Reports Server (NTRS)

Oxnevad, Knut I.

1998-01-01

At the Project Design Center at the Jet Propulsion Laboratory, a concurrent design environment is under development for supporting development and analyses of space instruments in the early, conceptual design phases. This environment is being utilized by a Team I, a multidisciplinary group of experts. Team I is providing study and proposal support. To provide the required support, the Team I concurrent design environment features effectively interconnected high-end optics, CAD, and thermal design and analysis tools. Innovative approaches for linking tools, and for transferring files between applications have been implemented. These approaches together with effective sharing of geometry between the optics, CAD, and thermal tools are already showing significant timesavings.

Design selection of an innovative tool holder for ultrasonic vibration assisted turning (IN-UVAT) using finite element analysis simulation

NASA Astrophysics Data System (ADS)

Rachmat, Haris; Ibrahim, M. Rasidi; Hasan, Sulaiman bin

2017-04-01

On of high technology in machining is ultrasonic vibration assisted turning. The design of tool holder was a crucial step to make sure the tool holder is enough to handle all forces on turning process. Because of the direct experimental approach is expensive, the paper studied to predict feasibility of tool holder displacement and effective stress was used the computational in finite element simulation. SS201 and AISI 1045 materials were used with sharp and ramp corners flexure hinges on design. The result shows that AISI 1045 material and which has ramp corner flexure hinge was the best choice to be produced. The displacement is around 11.3 micron and effective stress is 1.71e+008 N/m2 and also the factor of safety is 3.10.

Novel approaches to effects-based monitoring: 21st century tools for bio-effects prediction and surveillance

EPA Science Inventory

Effects-based monitoring (EBM) has been employed as a complement to chemical monitoring to help address knowledge gaps between chemical occurrence and biological effects. We have piloted several pathway-based approaches to EBM, that utilize modern bioinformatic and high throughpu...

Designing Tools for Supporting User Decision-Making in e-Commerce

NASA Astrophysics Data System (ADS)

Sutcliffe, Alistair; Al-Qaed, Faisal

The paper describes a set of tools designed to support a variety of user decision-making strategies. The tools are complemented by an online advisor so they can be adapted to different domains and users can be guided to adopt appropriate tools for different choices in e-commerce, e.g. purchasing high-value products, exploring product fit to users’ needs, or selecting products which satisfy requirements. The tools range from simple recommenders to decision support by interactive querying and comparison matrices. They were evaluated in a scenario-based experiment which varied the users’ task and motivation, with and without an advisor agent. The results show the tools and advisor were effective in supporting users and agreed with the predictions of ADM (adaptive decision making) theory, on which the design of the tools was based.

Development and Validation of a Decision Tool for Early Identification of Adult Patients with Severe and Complex Eating Disorder Psychopathology in Need of Highly Specialized Care.

PubMed

Dingemans, Alexandra E; Goorden, Maartje; Lötters, Freek J B; Bouwmans, Clazien; Danner, Unna N; van Elburg, Annemarie A; van Furth, Eric F; Hakkaart-van Roijen, Leona

2017-09-01

Patients with complex and severe eating disorders often receive a number of ineffective or/and insufficient treatments. Direct referral of these patients to highly specialized tertiary treatment facilities in an earlier stage of the disorder is likely to be more (cost)-effective. The aim of the study was to develop a decision tool that aids clinicians in early identification of these patients. After identification of criteria that were indicative of severity and complexity of eating disorder psychopathology by means of a systematic review of literature and consultation of a focus group, a Delphi method was applied to obtain consensus from experts on the list of relevant criteria. Finally, the decision tool was validated in clinical practice, and cut-off criteria were established. The tool demonstrated good feasibility and validity to identify patients for highly specialized tertiary care. The final decision tool consisted of five criteria that can easily be implemented in clinical practice. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association.

Mediator effect of statistical process control between Total Quality Management (TQM) and business performance in Malaysian Automotive Industry

NASA Astrophysics Data System (ADS)

Ahmad, M. F.; Rasi, R. Z.; Zakuan, N.; Hisyamudin, M. N. N.

2015-12-01

In today's highly competitive market, Total Quality Management (TQM) is vital management tool in ensuring a company can success in their business. In order to survive in the global market with intense competition amongst regions and enterprises, the adoption of tools and techniques are essential in improving business performance. There are consistent results between TQM and business performance. However, only few previous studies have examined the mediator effect namely statistical process control (SPC) between TQM and business performance. A mediator is a third variable that changes the association between an independent variable and an outcome variable. This study present research proposed a TQM performance model with mediator effect of SPC with structural equation modelling, which is a more comprehensive model for developing countries, specifically for Malaysia. A questionnaire was prepared and sent to 1500 companies from automotive industry and the related vendors in Malaysia, giving a 21.8 per cent rate. Attempts were made at findings significant impact of mediator between TQM practices and business performance showed that SPC is important tools and techniques in TQM implementation. The result concludes that SPC is partial correlation between and TQM and BP with indirect effect (IE) is 0.25 which can be categorised as high moderator effect.

On the use of high-frequency SCADA data for improved wind turbine performance monitoring

NASA Astrophysics Data System (ADS)

Gonzalez, E.; Stephen, B.; Infield, D.; Melero, J. J.

2017-11-01

SCADA-based condition monitoring of wind turbines facilitates the move from costly corrective repairs towards more proactive maintenance strategies. In this work, we advocate the use of high-frequency SCADA data and quantile regression to build a cost effective performance monitoring tool. The benefits of the approach are demonstrated through the comparison between state-of-the-art deterministic power curve modelling techniques and the suggested probabilistic model. Detection capabilities are compared for low and high-frequency SCADA data, providing evidence for monitoring at higher resolutions. Operational data from healthy and faulty turbines are used to provide a practical example of usage with the proposed tool, effectively achieving the detection of an incipient gearbox malfunction at a time horizon of more than one month prior to the actual occurrence of the failure.

Design of Friction Stir Welding Tool for Avoiding Root Flaws

PubMed Central

Ji, Shude; Xing, Jingwei; Yue, Yumei; Ma, Yinan; Zhang, Liguo; Gao, Shuangsheng

2013-01-01

In order to improve material flow behavior during friction stir welding and avoid root flaws of weld, a tool with a half-screw pin and a tool with a tapered-flute pin are suggested. The effect of flute geometry in tool pins on material flow velocity is investigated by the software ANSYS FLUENT. Numerical simulation results show that high material flow velocity appears near the rotational tool and material flow velocity rapidly decreases with the increase of distance away from the axis of the tool. Maximum material flow velocity by the tool with the tapered-flute pin appears at the beginning position of flute and the velocity decreases with the increase of flow length in flute. From the view of increasing the flow velocity of material near the bottom of the workpiece or in the middle of workpiece, the tool with the half-screw pin and the tool with the tapered-flute pin are both better than the conventional tool. PMID:28788426

Design of Friction Stir Welding Tool for Avoiding Root Flaws.

PubMed

Ji, Shude; Xing, Jingwei; Yue, Yumei; Ma, Yinan; Zhang, Liguo; Gao, Shuangsheng

2013-12-12

In order to improve material flow behavior during friction stir welding and avoid root flaws of weld, a tool with a half-screw pin and a tool with a tapered-flute pin are suggested. The effect of flute geometry in tool pins on material flow velocity is investigated by the software ANSYS FLUENT. Numerical simulation results show that high material flow velocity appears near the rotational tool and material flow velocity rapidly decreases with the increase of distance away from the axis of the tool. Maximum material flow velocity by the tool with the tapered-flute pin appears at the beginning position of flute and the velocity decreases with the increase of flow length in flute. From the view of increasing the flow velocity of material near the bottom of the workpiece or in the middle of workpiece, the tool with the half-screw pin and the tool with the tapered-flute pin are both better than the conventional tool.

The PEDro scale had acceptably high convergent validity, construct validity, and interrater reliability in evaluating methodological quality of pharmaceutical trials.

PubMed

Yamato, Tie Parma; Maher, Chris; Koes, Bart; Moseley, Anne

2017-06-01

The Physiotherapy Evidence Database (PEDro) scale has been widely used to investigate methodological quality in physiotherapy randomized controlled trials; however, its validity has not been tested for pharmaceutical trials. The aim of this study was to investigate the validity and interrater reliability of the PEDro scale for pharmaceutical trials. The reliability was also examined for the Cochrane Back and Neck (CBN) Group risk of bias tool. This is a secondary analysis of data from a previous study. We considered randomized placebo controlled trials evaluating any pain medication for chronic spinal pain or osteoarthritis. Convergent validity was evaluated by correlating the PEDro score with the summary score of the CBN risk of bias tool. The construct validity was tested using a linear regression analysis to determine the degree to which the total PEDro score is associated with treatment effect sizes, journal impact factor, and the summary score for the CBN risk of bias tool. The interrater reliability was estimated using the Prevalence and Bias Adjusted Kappa coefficient and 95% confidence interval (CI) for the PEDro scale and CBN risk of bias tool. Fifty-three trials were included, with 91 treatment effect sizes included in the analyses. The correlation between PEDro scale and CBN risk of bias tool was 0.83 (95% CI 0.76-0.88) after adjusting for reliability, indicating strong convergence. The PEDro score was inversely associated with effect sizes, significantly associated with the summary score for the CBN risk of bias tool, and not associated with the journal impact factor. The interrater reliability for each item of the PEDro scale and CBN risk of bias tool was at least substantial for most items (>0.60). The intraclass correlation coefficient for the PEDro score was 0.80 (95% CI 0.68-0.88), and for the CBN, risk of bias tool was 0.81 (95% CI 0.69-0.88). There was evidence for the convergent and construct validity for the PEDro scale when used to evaluate methodological quality of pharmacological trials. Both risk of bias tools have acceptably high interrater reliability. Copyright © 2017 Elsevier Inc. All rights reserved.

Friction Stir Spot Welding of Advanced High Strength Steels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hovanski, Yuri; Grant, Glenn J.; Santella, M. L.

Friction stir spot welding techniques were developed to successfully join several advanced high strength steels. Two distinct tool materials were evaluated to determine the effect of tool materials on the process parameters and joint properties. Welds were characterized primarily via lap shear, microhardness, and optical microscopy. Friction stir spot welds were compared to the resistance spot welds in similar strength alloys by using the AWS standard for resistance spot welding high strength steels. As further comparison, a primitive cost comparison between the two joining processes was developed, which included an evaluation of the future cost prospects of friction stir spotmore » welding in advanced high strength steels.« less

Teacher Motivation and Retention in High School Special Education

ERIC Educational Resources Information Center

Lawrence, Matthew Daniel

2017-01-01

The purpose of this study was to identify the best motivational tools for recruiting high-quality high school special education teachers; and to identify effective techniques and strategies to facilitate those individuals' experiencing career longevity within the profession. This study also sought to highlight the specific issues that actively…

The Effects of Visual Magnification and Physical Movement Scale on the Manipulation of a Tool with Indirect Vision

ERIC Educational Resources Information Center

Bohan, Michael; McConnell, Daniel S.; Chaparro, Alex; Thompson, Shelby G.

2010-01-01

Modern tools often separate the visual and physical aspects of operation, requiring users to manipulate an instrument while viewing the results indirectly on a display. This can pose usability challenges particularly in applications, such as laparoscopic surgery, that require a high degree of movement precision. Magnification used to augment the…

Technology and Jobs: Computer-Aided Design. Numerical-Control Machine-Tool Operators. Office Automation.

ERIC Educational Resources Information Center

Stanton, Michael; And Others

1985-01-01

Three reports on the effects of high technology on the nature of work include (1) Stanton on applications and implications of computer-aided design for engineers, drafters, and architects; (2) Nardone on the outlook and training of numerical-control machine tool operators; and (3) Austin and Drake on the future of clerical occupations in automated…

On-machine precision preparation and dressing of ball-headed diamond wheel for the grinding of fused silica

NASA Astrophysics Data System (ADS)

Chen, Mingjun; Li, Ziang; Yu, Bo; Peng, Hui; Fang, Zhen

2013-09-01

In the grinding of high quality fused silica parts with complex surface or structure using ball-headed metal bonded diamond wheel with small diameter, the existing dressing methods are not suitable to dress the ball-headed diamond wheel precisely due to that they are either on-line in process dressing which may causes collision problem or without consideration for the effects of the tool setting error and electrode wear. An on-machine precision preparation and dressing method is proposed for ball-headed diamond wheel based on electrical discharge machining. By using this method the cylindrical diamond wheel with small diameter is manufactured to hemispherical-headed form. The obtained ball-headed diamond wheel is dressed after several grinding passes to recover geometrical accuracy and sharpness which is lost due to the wheel wear. A tool setting method based on high precision optical system is presented to reduce the wheel center setting error and dimension error. The effect of electrode tool wear is investigated by electrical dressing experiments, and the electrode tool wear compensation model is established based on the experimental results which show that the value of wear ratio coefficient K' tends to be constant with the increasing of the feed length of electrode and the mean value of K' is 0.156. Grinding experiments of fused silica are carried out on a test bench to evaluate the performance of the preparation and dressing method. The experimental results show that the surface roughness of the finished workpiece is 0.03 μm. The effect of the grinding parameter and dressing frequency on the surface roughness is investigated based on the measurement results of the surface roughness. This research provides an on-machine preparation and dressing method for ball-headed metal bonded diamond wheel used in the grinding of fused silica, which provides a solution to the tool setting method and the effect of electrode tool wear.

Stochastic Simulation Tool for Aerospace Structural Analysis

NASA Technical Reports Server (NTRS)

Knight, Norman F.; Moore, David F.

2006-01-01

Stochastic simulation refers to incorporating the effects of design tolerances and uncertainties into the design analysis model and then determining their influence on the design. A high-level evaluation of one such stochastic simulation tool, the MSC.Robust Design tool by MSC.Software Corporation, has been conducted. This stochastic simulation tool provides structural analysts with a tool to interrogate their structural design based on their mathematical description of the design problem using finite element analysis methods. This tool leverages the analyst's prior investment in finite element model development of a particular design. The original finite element model is treated as the baseline structural analysis model for the stochastic simulations that are to be performed. A Monte Carlo approach is used by MSC.Robust Design to determine the effects of scatter in design input variables on response output parameters. The tool was not designed to provide a probabilistic assessment, but to assist engineers in understanding cause and effect. It is driven by a graphical-user interface and retains the engineer-in-the-loop strategy for design evaluation and improvement. The application problem for the evaluation is chosen to be a two-dimensional shell finite element model of a Space Shuttle wing leading-edge panel under re-entry aerodynamic loading. MSC.Robust Design adds value to the analysis effort by rapidly being able to identify design input variables whose variability causes the most influence in response output parameters.

Single Cell and Population Level Analysis of HCA Data.

PubMed

Novo, David; Ghosh, Kaya; Burke, Sean

2018-01-01

High Content Analysis instrumentation has undergone tremendous hardware advances in recent years. It is now possible to obtain images of hundreds of thousands to millions of individual objects, across multiple wells, channels, and plates, in a reasonable amount of time. In addition, it is possible to extract dozens, or hundreds, of features per object using commonly available software tools. Analyzing this data provides new challenges to the scientists. The magnitude of these numbers is reminiscent of flow cytometer, where practitioners have long been taking what effectively amounted to very low resolution, multi-parametric measurements from individual cells for many decades. Flow cytometrists have developed a wide range of tools to effectively analyze and interpret these types of data. This chapter will review the techniques used in flow cytometry and show how they can easily and effectively be applied to High Content Analysis.

Investigation on the Effect of a Pre-Center Drill Hole and Tool Material on Thrust Force, Surface Roughness, and Cylindricity in the Drilling of Al7075.

PubMed

Ghasemi, Amir Hossein; Khorasani, Amir Mahyar; Gibson, Ian

2018-01-16

Drilling is one of the most useful metal cutting processes and is used in various applications, such as aerospace, electronics, and automotive. In traditional drilling methods, the thrust force, torque, tolerance, and tribology (surface roughness) are related to the cutting condition and tool geometry. In this paper, the effects of a pre-center drill hole, tool material, and drilling strategy (including continuous and non-continuous feed) on thrust force, surface roughness, and dimensional accuracy (cylindricity) have been investigated. The results show that using pre-center drill holes leads to a reduction of the engagement force and an improvement in the surface quality and cylindricity. Non-continuous drilling reduces the average thrust force and cylindricity value, and High Speed Steels HSS-Mo (high steel speed + 5-8% Mo) reduces the maximum quantity of cutting forces. Moreover, cylindricity is directly related to cutting temperature and is improved by using a non-continuous drilling strategy.

Investigation on the Effect of a Pre-Center Drill Hole and Tool Material on Thrust Force, Surface Roughness, and Cylindricity in the Drilling of Al7075

PubMed Central

Ghasemi, Amir Hossein; Khorasani, Amir Mahyar

2018-01-01

Drilling is one of the most useful metal cutting processes and is used in various applications, such as aerospace, electronics, and automotive. In traditional drilling methods, the thrust force, torque, tolerance, and tribology (surface roughness) are related to the cutting condition and tool geometry. In this paper, the effects of a pre-center drill hole, tool material, and drilling strategy (including continuous and non-continuous feed) on thrust force, surface roughness, and dimensional accuracy (cylindricity) have been investigated. The results show that using pre-center drill holes leads to a reduction of the engagement force and an improvement in the surface quality and cylindricity. Non-continuous drilling reduces the average thrust force and cylindricity value, and High Speed Steels HSS-Mo (high steel speed + 5–8% Mo) reduces the maximum quantity of cutting forces. Moreover, cylindricity is directly related to cutting temperature and is improved by using a non-continuous drilling strategy. PMID:29337858

Common Effects Methodology National Stakeholder Meeting December 1, 2010

EPA Pesticide Factsheets

EPA is exploring how to build on the substantial high quality science developed under both OPP programs to develop additional tools and approaches to support a consistent and common set of effects characterization methods using best available information.

Research on the tool holder mode in high speed machining

NASA Astrophysics Data System (ADS)

Zhenyu, Zhao; Yongquan, Zhou; Houming, Zhou; Xiaomei, Xu; Haibin, Xiao

2018-03-01

High speed machining technology can improve the processing efficiency and precision, but also reduce the processing cost. Therefore, the technology is widely regarded in the industry. With the extensive application of high-speed machining technology, high-speed tool system has higher and higher requirements on the tool chuck. At present, in high speed precision machining, several new kinds of clip heads are as long as there are heat shrinkage tool-holder, high-precision spring chuck, hydraulic tool-holder, and the three-rib deformation chuck. Among them, the heat shrinkage tool-holder has the advantages of high precision, high clamping force, high bending rigidity and dynamic balance, etc., which are widely used. Therefore, it is of great significance to research the new requirements of the machining tool system. In order to adapt to the requirement of high speed machining precision machining technology, this paper expounds the common tool holder technology of high precision machining, and proposes how to select correctly tool clamping system in practice. The characteristics and existing problems are analyzed in the tool clamping system.

Feasibility study tool for semi-rigid joints design of high-rise buildings steel structures

NASA Astrophysics Data System (ADS)

Bagautdinov, Ruslan; Monastireva, Daria; Bodak, Irina; Potapova, Irina

2018-03-01

There are many ways to consider the final cost of the high-rise building structures and to define, which of their different variations are the most effective from different points of view. The research of Jaakko Haapio is conducted in Tampere University of Technology, which aims to develop a method that allows determining the manufacturing and installation costs of steel structures already at the tender phase while taking into account their details. This paper is aimed to make the analysis of the Feature-Based Costing Method for skeletal steel structures proposed by Jaakko Haapio. The most appropriate ways to improve the tool and to implement it in the Russian circumstances for high-rise building design are derived. Presented tool can be useful not only for the designers but, also, for the steel structures manufacturing organizations, which can help to utilize BIM technologies in the organization process and controlling on the factory.

Single Cell Proteomics in Biomedicine: High-dimensional Data Acquisition, Visualization and Analysis

PubMed Central

Su, Yapeng; Shi, Qihui; Wei, Wei

2017-01-01

New insights on cellular heterogeneity in the last decade provoke the development of a variety of single cell omics tools at a lightning pace. The resultant high-dimensional single cell data generated by these tools require new theoretical approaches and analytical algorithms for effective visualization and interpretation. In this review, we briefly survey the state-of-the-art single cell proteomic tools with a particular focus on data acquisition and quantification, followed by an elaboration of a number of statistical and computational approaches developed to date for dissecting the high-dimensional single cell data. The underlying assumptions, unique features and limitations of the analytical methods with the designated biological questions they seek to answer will be discussed. Particular attention will be given to those information theoretical approaches that are anchored in a set of first principles of physics and can yield detailed (and often surprising) predictions. PMID:28128880

Springback Simulation and Compensation for High Strength Parts Using JSTAMP

NASA Astrophysics Data System (ADS)

Shindo, Terumasa; Sugitomo, Nobuhiko; Ma, Ninshu

2011-08-01

The stamping parts made from high strength steel have a large springback which is difficult to control. With the development of simulation technology, the springback can be accurately predicted using advanced kinematic material models and CAE systems. In this paper, a stamping process for a pillar part made from several classes of high strength steel was simulated using a Yoshida-Uemori kinematic material model and the springback was well predicted. To obtain the desired part shape, CAD surfaces of the stamping tools were compensated by a CAE system JSTAMP. After applying the compensation 2 or 3 times, the dimension accuracy of the simulation for the part shape achieved was about 0.5 mm. The compensated CAD surfaces of the stamping tools were directly exported from JSTAMP to CAM for machining. The effectiveness of the compensation was verified by an experiment using the compensated tools.

Spotsizer: High-throughput quantitative analysis of microbial growth.

PubMed

Bischof, Leanne; Převorovský, Martin; Rallis, Charalampos; Jeffares, Daniel C; Arzhaeva, Yulia; Bähler, Jürg

2016-10-01

Microbial colony growth can serve as a useful readout in assays for studying complex genetic interactions or the effects of chemical compounds. Although computational tools for acquiring quantitative measurements of microbial colonies have been developed, their utility can be compromised by inflexible input image requirements, non-trivial installation procedures, or complicated operation. Here, we present the Spotsizer software tool for automated colony size measurements in images of robotically arrayed microbial colonies. Spotsizer features a convenient graphical user interface (GUI), has both single-image and batch-processing capabilities, and works with multiple input image formats and different colony grid types. We demonstrate how Spotsizer can be used for high-throughput quantitative analysis of fission yeast growth. The user-friendly Spotsizer tool provides rapid, accurate, and robust quantitative analyses of microbial growth in a high-throughput format. Spotsizer is freely available at https://data.csiro.au/dap/landingpage?pid=csiro:15330 under a proprietary CSIRO license.

Active control of residual tool marks for freeform optics functionalization by novel biaxial servo assisted fly cutting.

PubMed

Zhu, Zhiwei; To, Suet; Zhang, Shaojian

2015-09-01

The inherent residual tool marks (RTM) with particular patterns highly affect optical functions of the generated freeform optics in fast tool servo or slow tool servo (FTS/STS) diamond turning. In the present study, a novel biaxial servo assisted fly cutting (BSFC) method is developed for flexible control of the RTM to be a functional micro/nanotexture in freeform optics generation, which is generally hard to achieve in FTS/STS diamond turning. In the BSFC system, biaxial servo motions along the z-axis and side-feeding directions are mainly adopted for primary surface generation and RTM control, respectively. Active control of the RTM from the two aspects, namely, undesired effect elimination or effective functionalization, are experimentally demonstrated by fabricating a typical F-theta freeform surface with scattering homogenization and two functional microstructures with imposition of secondary phase gratings integrating both reflective and diffractive functions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lherbier, Louis, W.; Novotnak, David, J.; Herling, Darrell, R.

Hot forming processes such as forging, die casting and glass forming require tooling that is subjected to high temperatures during the manufacturing of components. Current tooling is adversely affected by prolonged exposure at high temperatures. Initial studies were conducted to determine the root cause of tool failures in a number of applications. Results show that tool failures vary and depend on the operating environment under which they are used. Major root cause failures include (1) thermal softening, (2) fatigue and (3) tool erosion, all of which are affected by process boundary conditions such as lubrication, cooling, process speed, etc. Whilemore » thermal management is a key to addressing tooling failures, it was clear that new tooling materials with superior high temperature strength could provide improved manufacturing efficiencies. These efficiencies are based on the use of functionally graded materials (FGM), a new subset of hybrid tools with customizable properties that can be fabricated using advanced powder metallurgy manufacturing technologies. Modeling studies of the various hot forming processes helped identify the effect of key variables such as stress, temperature and cooling rate and aid in the selection of tooling materials for specific applications. To address the problem of high temperature strength, several advanced powder metallurgy nickel and cobalt based alloys were selected for evaluation. These materials were manufactured into tooling using two relatively new consolidation processes. One process involved laser powder deposition (LPD) and the second involved a solid state dynamic powder consolidation (SSDPC) process. These processes made possible functionally graded materials (FGM) that resulted in shaped tooling that was monolithic, bi-metallic or substrate coated. Manufacturing of tooling with these processes was determined to be robust and consistent for a variety of materials. Prototype and production testing of FGM tooling showed the benefits of the nickel and cobalt based powder metallurgy alloys in a number of applications evaluated. Improvements in tool life ranged from three (3) to twenty (20) or more times than currently used tooling. Improvements were most dramatic where tool softening and deformation were the major cause of tool failures in hot/warm forging applications. Significant improvement was also noted in erosion of aluminum die casting tooling. Cost and energy savings can be realized as a result of increased tooling life, increased productivity and a reduction in scrap because of improved dimensional controls. Although LPD and SSDPC tooling usually have higher acquisition costs, net tooling costs per component produced drops dramatically with superior tool performance. Less energy is used to manufacture the tooling because fewer tools are required and less recycling of used tools are needed for the hot forming process. Energy is saved during the component manufacturing cycle because more parts can be produced in shorter periods of time. Energy is also saved by minimizing heating furnace idling time because of less downtime for tooling changes.« less

High-temperature, high-pressure bonding of nested tubular metallic components

DOEpatents

Quinby, Thomas C.

1980-01-01

This invention is a tool for effecting high-temperature, high-compression bonding between the confronting faces of nested, tubular, metallic components. In a typical application, the tool is used to produce tubular target assemblies for irradiation in nuclear reactors or particle accelerators, the target assembly comprising a uranium foil and an aluminum-alloy substrate. The tool preferably is composed throughout of graphite. It comprises a tubular restraining member in which a mechanically expandable tubular core is mounted to form an annulus with the member. The components to be bonded are mounted in nested relation in the annulus. The expandable core is formed of individually movable, axially elongated segments whose outer faces cooperatively define a cylindrical pressing surface and whose inner faces cooperatively define two opposed, inwardly tapered, axial bores. Tapered rams extend respectively into the bores. The loaded tool is mounted in a conventional hot-press provided with evacuation means, heaters for maintaining its interior at bonding temperature, and hydraulic cylinders for maintaining a selected inwardly directed pressure on the tapered rams. With the hot-press evacuated and the loaded tool at the desired temperature, the cylinders are actuated to apply the selected pressure to the rams. The rams in turn expand the segmented core to maintain the nested components in compression against the restraining member. These conditions are maintained until the confronting faces of the nested components are joined in a continuous, uniform bond characterized by high thermal conductivity.

Effects of an evidence-based computerized virtual clinician on low-density lipoprotein and non-high-density lipoprotein cholesterol in adults without cardiovascular disease: The Interactive Cholesterol Advisory Tool.

PubMed

Block, Robert C; Abdolahi, Amir; Niemiec, Christopher P; Rigby, C Scott; Williams, Geoffrey C

2016-12-01

There is a lack of research on the use of electronic tools that guide patients toward reducing their cardiovascular disease risk. We conducted a 9-month clinical trial in which participants who were at low (n = 100) and moderate (n = 23) cardiovascular disease risk-based on the National Cholesterol Education Program III's 10-year risk estimator-were randomized to usual care or to usual care plus use of an Interactive Cholesterol Advisory Tool during the first 8 weeks of the study. In the moderate-risk category, an interaction between treatment condition and Framingham risk estimate on low-density lipoprotein and non-high-density lipoprotein cholesterol was observed, such that participants in the virtual clinician treatment condition had a larger reduction in low-density lipoprotein and non-high-density lipoprotein cholesterol as their Framingham risk estimate increased. Perceptions of the Interactive Cholesterol Advisory Tool were positive. Evidence-based information about cardiovascular disease risk and its management was accessible to participants without major technical challenges. © The Author(s) 2015.

High accurate interpolation of NURBS tool path for CNC machine tools

NASA Astrophysics Data System (ADS)

Liu, Qiang; Liu, Huan; Yuan, Songmei

2016-09-01

Feedrate fluctuation caused by approximation errors of interpolation methods has great effects on machining quality in NURBS interpolation, but few methods can efficiently eliminate or reduce it to a satisfying level without sacrificing the computing efficiency at present. In order to solve this problem, a high accurate interpolation method for NURBS tool path is proposed. The proposed method can efficiently reduce the feedrate fluctuation by forming a quartic equation with respect to the curve parameter increment, which can be efficiently solved by analytic methods in real-time. Theoretically, the proposed method can totally eliminate the feedrate fluctuation for any 2nd degree NURBS curves and can interpolate 3rd degree NURBS curves with minimal feedrate fluctuation. Moreover, a smooth feedrate planning algorithm is also proposed to generate smooth tool motion with considering multiple constraints and scheduling errors by an efficient planning strategy. Experiments are conducted to verify the feasibility and applicability of the proposed method. This research presents a novel NURBS interpolation method with not only high accuracy but also satisfying computing efficiency.

Common Effects Methodology National Stakeholder Meeting December 1, 2010 White Papers

EPA Pesticide Factsheets

EPA is exploring how to build on the substantial high quality science developed under both OPP programs to develop additional tools and approaches to support a consistent and common set of effects characterization methods using best available information.

Common Effects Methodology Regional Stakeholder Meeting January 11 -22, 2010

EPA Pesticide Factsheets

EPA is exploring how to build on the substantial high quality science developed under both OPP programs to develop additional tools and approaches to support a consistent and common set of effects characterization methods using best available information.

Key Topics for High-Lift Research: A Joint Wind Tunnel/Flight Test Approach

NASA Technical Reports Server (NTRS)

Fisher, David; Thomas, Flint O.; Nelson, Robert C.

1996-01-01

Future high-lift systems must achieve improved aerodynamic performance with simpler designs that involve fewer elements and reduced maintenance costs. To expeditiously achieve this, reliable CFD design tools are required. The development of useful CFD-based design tools for high lift systems requires increased attention to unresolved flow physics issues. The complex flow field over any multi-element airfoil may be broken down into certain generic component flows which are termed high-lift building block flows. In this report a broad spectrum of key flow field physics issues relevant to the design of improved high lift systems are considered. It is demonstrated that in-flight experiments utilizing the NASA Dryden Flight Test Fixture (which is essentially an instrumented ventral fin) carried on an F-15B support aircraft can provide a novel and cost effective method by which both Reynolds and Mach number effects associated with specific high lift building block flows can be investigated. These in-flight high lift building block flow experiments are most effective when performed in conjunction with coordinated ground based wind tunnel experiments in low speed facilities. For illustrative purposes three specific examples of in-flight high lift building block flow experiments capable of yielding a high payoff are described. The report concludes with a description of a joint wind tunnel/flight test approach to high lift aerodynamics research.

Swept Mechanism of Micro-Milling Tool Geometry Effect on Machined Oxygen Free High Conductivity Copper (OFHC) Surface Roughness

PubMed Central

Shi, Zhenyu; Liu, Zhanqiang; Li, Yuchao; Qiao, Yang

2017-01-01

Cutting tool geometry should be very much considered in micro-cutting because it has a significant effect on the topography and accuracy of the machined surface, particularly considering the uncut chip thickness is comparable to the cutting edge radius. The objective of this paper was to clarify the influence of the mechanism of the cutting tool geometry on the surface topography in the micro-milling process. Four different cutting tools including two two-fluted end milling tools with different helix angles of 15° and 30° cutting tools, as well as two three-fluted end milling tools with different helix angles of 15° and 30° were investigated by combining theoretical modeling analysis with experimental research. The tool geometry was mathematically modeled through coordinate translation and transformation to make all three cutting edges at the cutting tool tip into the same coordinate system. Swept mechanisms, minimum uncut chip thickness, and cutting tool run-out were considered on modeling surface roughness parameters (the height of surface roughness Rz and average surface roughness Ra) based on the established mathematical model. A set of cutting experiments was carried out using four different shaped cutting tools. It was found that the sweeping volume of the cutting tool increases with the decrease of both the cutting tool helix angle and the flute number. Great coarse machined surface roughness and more non-uniform surface topography are generated when the sweeping volume increases. The outcome of this research should bring about new methodologies for micro-end milling tool design and manufacturing. The machined surface roughness can be improved by appropriately selecting the tool geometrical parameters. PMID:28772479

Researcher Test Manual for the Learner-Centered Battery (Grades 6-12 Version). A Set of Self-Assessment and Reflection Tools for Middle and High School Teachers.

ERIC Educational Resources Information Center

McCombs, Barbara L.; Lauer, Patricia A.; Peralez, Audrey

The Learner-Centered Battery (LCB) is a set of short self-assessment tools for teachers and their students that can help teachers identify profiles of effective beliefs, practices, and discrepancies between teacher and student perspectives. Personalized feedback is available for interpreting individual profiles relative to profiles of the most…

Rising dough and baking bread at the Australian synchrotron

NASA Astrophysics Data System (ADS)

Mayo, S. C.; McCann, T.; Day, L.; Favaro, J.; Tuhumury, H.; Thompson, D.; Maksimenko, A.

2016-01-01

Wheat protein quality and the amount of common salt added in dough formulation can have a significant effect on the microstructure and loaf volume of bread. High-speed synchrotron micro-CT provides an ideal tool for observing the three dimensional structure of bread dough in situ during proving (rising) and baking. In this work, the synchrotron micro-CT technique was used to observe the structure and time evolution of doughs made from high and low protein flour and three different salt additives. These experiments showed that, as expected, high protein flour produces a higher volume loaf compared to low protein flour regardless of salt additives. Furthermore the results show that KCl in particular has a very negative effect on dough properties resulting in much reduced porosity. The hundreds of datasets produced and analysed during this experiment also provided a valuable test case for handling large quantities of data using tools on the Australian Synchrotron's MASSIVE cluster.

The Outdoor MEDIA DOT: The development and inter-rater reliability of a tool designed to measure food and beverage outlets and outdoor advertising.

PubMed

Poulos, Natalie S; Pasch, Keryn E

2015-07-01

Few studies of the food environment have collected primary data, and even fewer have reported reliability of the tool used. This study focused on the development of an innovative electronic data collection tool used to document outdoor food and beverage (FB) advertising and establishments near 43 middle and high schools in the Outdoor MEDIA Study. Tool development used GIS based mapping, an electronic data collection form on handheld devices, and an easily adaptable interface to efficiently collect primary data within the food environment. For the reliability study, two teams of data collectors documented all FB advertising and establishments within one half-mile of six middle schools. Inter-rater reliability was calculated overall and by advertisement or establishment category using percent agreement. A total of 824 advertisements (n=233), establishment advertisements (n=499), and establishments (n=92) were documented (range=8-229 per school). Overall inter-rater reliability of the developed tool ranged from 69-89% for advertisements and establishments. Results suggest that the developed tool is highly reliable and effective for documenting the outdoor FB environment. Copyright © 2015 Elsevier Ltd. All rights reserved.

Machine tools error characterization and compensation by on-line measurement of artifact

NASA Astrophysics Data System (ADS)

Wahid Khan, Abdul; Chen, Wuyi; Wu, Lili

2009-11-01

Most manufacturing machine tools are utilized for mass production or batch production with high accuracy at a deterministic manufacturing principle. Volumetric accuracy of machine tools depends on the positional accuracy of the cutting tool, probe or end effector related to the workpiece in the workspace volume. In this research paper, a methodology is presented for volumetric calibration of machine tools by on-line measurement of an artifact or an object of a similar type. The machine tool geometric error characterization was carried out through a standard or an artifact, having similar geometry to the mass production or batch production product. The artifact was measured at an arbitrary position in the volumetric workspace with a calibrated Renishaw touch trigger probe system. Positional errors were stored into a computer for compensation purpose, to further run the manufacturing batch through compensated codes. This methodology was found quite effective to manufacture high precision components with more dimensional accuracy and reliability. Calibration by on-line measurement gives the advantage to improve the manufacturing process by use of deterministic manufacturing principle and found efficient and economical but limited to the workspace or envelop surface of the measured artifact's geometry or the profile.

The Outdoor MEDIA DOT: The Development and Inter-Rater Reliability of a Tool Designed to Measure Food and Beverage Outlets and Outdoor Advertising

PubMed Central

Poulos, Natalie S.; Pasch, Keryn E.

2015-01-01

Few studies of the food environment have collected primary data, and even fewer have reported reliability of the tool used. This study focused on the development of an innovative electronic data collection tool used to document outdoor food and beverage (FB) advertising and establishments near 43 middle and high schools in the Outdoor MEDIA Study. Tool development used GIS based mapping, an electronic data collection form on handheld devices, and an easily adaptable interface to efficiently collect primary data within the food environment. For the reliability study, two teams of data collectors documented all FB advertising and establishments within one half-mile of six middle schools. Inter-rater reliability was calculated overall and by advertisement or establishment category using percent agreement. A total of 824 advertisements (n=233), establishment advertisements (n=499), and establishments (n=92) were documented (range=8–229 per school). Overall inter-rater reliability of the developed tool ranged from 69–89% for advertisements and establishments. Results suggest that the developed tool is highly reliable and effective for documenting the outdoor FB environment. PMID:26022774

Effectiveness of knowledge translation tools addressing multiple high-burden chronic diseases affecting older adults: protocol for a systematic review alongside a realist review.

PubMed

Kastner, Monika; Perrier, Laure; Hamid, Jemila; Tricco, Andrea C; Cardoso, Roberta; Ivers, Noah M; Liu, Barbara; Marr, Sharon; Holroyd-Leduc, Jayna; Wong, Geoff; Graves, Lisa; Straus, Sharon E

2015-02-03

The burden of chronic disease is a global phenomenon, particularly among people aged 65 years and older. More than half of older adults have more than one chronic disease and their care is not optimal. Chronic disease management (CDM) tools have the potential to meet this challenge but they are primarily focused on a single disease, which fails to address the growing number of seniors with multiple chronic conditions. We will conduct a systematic review alongside a realist review to identify effective CDM tools that integrate one or more high-burden chronic diseases affecting older adults and to better understand for whom, under what circumstances, how and why they produce their outcomes. We will search MEDLINE, EMBASE, CINAHL, AgeLine and the Cochrane Library for experimental, quasi-experimental, observational and qualitative studies in any language investigating CDM tools that facilitate optimal disease management in one or more high-burden chronic diseases affecting adults aged ≥65 years. Study selection will involve calibration of reviewers to ensure reliability of screening and duplicate assessment of articles. Data abstraction and risk of bias assessment will also be performed independently. Analysis will include descriptive summaries of study and appraisal characteristics, effectiveness of each CDM tool (meta-analysis if appropriate); and a realist programme theory will be developed and refined to explain the outcome patterns within the included studies. Ethics approval is not required for this study. We anticipate that our findings, pertaining to gaps in care across high-burden chronic diseases affecting seniors and highlighting specific areas that may require more research, will be of interest to a wide range of knowledge users and stakeholders. We will publish and present our findings widely, and also plan more active dissemination strategies such as workshops with our key stakeholders. Our protocol is registered with PROSPERO (registration number CRD42014014489). Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Assessing adherence to the evidence base in the management of poststroke dysphagia.

PubMed

Burton, Christopher; Pennington, Lindsay; Roddam, Hazel; Russell, Ian; Russell, Daphne; Krawczyk, Karen; Smith, Hilary A

2006-01-01

To evaluate the reliability and responsiveness to change of an audit tool to assess adherence to evidence of effectiveness in the speech and language therapy (SLT) management of poststroke dysphagia. The tool was used to review SLT practice as part of a randomized study of different education strategies. Medical records were audited before and after delivery of the trial intervention. Seventeen SLT departments in the north-west of England participated in the study. The assessment tool was used to assess the medical records of 753 patients before and 717 patients after delivery of the trial intervention across the 17 departments. A target of 10 records per department per month was sought, using systematic sampling with a random start. Inter- and intra-rater reliability were explored, together with the tool's internal consistency and responsiveness to change. The assessment tool had high face validity, although internal consistency was low (ra = 0.37). Composite scores on the tool were however responsive to differences between SLT departments. Both inter- and intra-rater reliability ranged from 'substantial' to 'near perfect' across all items. The audit tool has high face validity and measurement reliability. The use of a composite adherence score should, however, proceed with caution as internal consistency is low.

Drilling High Precision Holes in Ti6Al4V Using Rotary Ultrasonic Machining and Uncertainties Underlying Cutting Force, Tool Wear, and Production Inaccuracies.

PubMed

Chowdhury, M A K; Sharif Ullah, A M M; Anwar, Saqib

2017-09-12

Ti6Al4V alloys are difficult-to-cut materials that have extensive applications in the automotive and aerospace industry. A great deal of effort has been made to develop and improve the machining operations of Ti6Al4V alloys. This paper presents an experimental study that systematically analyzes the effects of the machining conditions (ultrasonic power, feed rate, spindle speed, and tool diameter) on the performance parameters (cutting force, tool wear, overcut error, and cylindricity error), while drilling high precision holes on the workpiece made of Ti6Al4V alloys using rotary ultrasonic machining (RUM). Numerical results were obtained by conducting experiments following the design of an experiment procedure. The effects of the machining conditions on each performance parameter have been determined by constructing a set of possibility distributions (i.e., trapezoidal fuzzy numbers) from the experimental data. A possibility distribution is a probability-distribution-neural representation of uncertainty, and is effective in quantifying the uncertainty underlying physical quantities when there is a limited number of data points which is the case here. Lastly, the optimal machining conditions have been identified using these possibility distributions.

Invited review article: the electrostatic plasma lens.

PubMed

Goncharov, Alexey

2013-02-01

The fundamental principles, experimental results, and potential applications of the electrostatic plasma lens for focusing and manipulating high-current, energetic, heavy ion beams are reviewed. First described almost 50 years ago, this optical beam device provides space charge neutralization of the ion beam within the lens volume, and thus provides an effective and unique tool for focusing high current beams where a high degree of neutralization is essential to prevent beam blow-up. Short and long lenses have been explored, and a lens in which the magnetic field is provided by rare-earth permanent magnets has been demonstrated. Applications include the use of this kind of optical tool for laboratory ion beam manipulation, high dose ion implantation, heavy ion accelerator injection, in heavy ion fusion, and other high technology.

Wear-Induced Changes in FSW Tool Pin Profile: Effect of Process Parameters

NASA Astrophysics Data System (ADS)

Sahlot, Pankaj; Jha, Kaushal; Dey, G. K.; Arora, Amit

2018-06-01

Friction stir welding (FSW) of high melting point metallic (HMPM) materials has limited application due to tool wear and relatively short tool life. Tool wear changes the profile of the tool pin and adversely affects weld properties. A quantitative understanding of tool wear and tool pin profile is crucial to develop the process for joining of HMPM materials. Here we present a quantitative wear study of H13 steel tool pin profile for FSW of CuCrZr alloy. The tool pin profile is analyzed at multiple traverse distances for welding with various tool rotational and traverse speeds. The results indicate that measured wear depth is small near the pin root and significantly increases towards the tip. Near the pin tip, wear depth increases with increase in tool rotational speed. However, change in wear depth near the pin root is minimal. Wear depth also increases with decrease in tool traverse speeds. Tool pin wear from the bottom results in pin length reduction, which is greater for higher tool rotational speeds, and longer traverse distances. The pin profile changes due to wear and result in root defect for long traverse distance. This quantitative understanding of tool wear would be helpful to estimate tool wear, optimize process parameters, and tool pin shape during FSW of HMPM materials.

METHODS FOR MONITORING THE EFFECTS OF ENVIRONMENTAL TOXINS ON THE VISUAL SYSTEM.

EPA Science Inventory

A high percentage of neurotoxic compounds adversely effect the visual system. Our goal is to apply the tools of vision science to problems of toxicological import, exposure-related alterations in visual physiology, psychophysical function, and ocular development. Methods can ...

Perspective for using Nd-Fe-B magnets as a tool for the improvement of the production and transportation of Vietnamese crude oil with high paraffin content

NASA Astrophysics Data System (ADS)

Tung, N. P.; Vinh, N. Q.; Phong, N. T. P.; Long, B. Q. K.; Hung, P. V.

2003-04-01

Controlling the paraffin deposition is one of the most serious and costly problems for high-paraffin crude-oil production and transportation. This holds especially for offshore, deep-water wells and pipelines, like in Vietnam. For finding solutions for these problems, a series of experiments has been performed in order to study the effects of a magnetic field on the rheology of two often produced crude oil samples, using the high and variable magnetic-flux density of a Nd-Fe-B magnet. The resulting changes in the essential characteristics of the magnetically treated (MT) crude oils, like form and size of the paraffin clusters as well as the rheology parameters, have definitely proved the possibility to use a Nd-Fe-B magnetic tool as an environmentally friendly and effective method to control the paraffin deposition in crude oils of Vietnam that have a high paraffin content.

Space Shuttle Software Development and Certification

NASA Technical Reports Server (NTRS)

Orr, James K.; Henderson, Johnnie A

2000-01-01

Man-rated software, "software which is in control of systems and environments upon which human life is critically dependent," must be highly reliable. The Space Shuttle Primary Avionics Software System is an excellent example of such a software system. Lessons learn from more than 20 years of effort have identified basic elements that must be present to achieve this high degree of reliability. The elements include rigorous application of appropriate software development processes, use of trusted tools to support those processes, quantitative process management, and defect elimination and prevention. This presentation highlights methods used within the Space Shuttle project and raises questions that must be addressed to provide similar success in a cost effective manner on future long-term projects where key application development tools are COTS rather than internally developed custom application development tools

Prevention of MSD by means of ergonomic risk assessment (tools) in all phases of the vehicle development process.

PubMed

Karlheinz, Schaub; Michaela, Kugler; Max, Bierwirth; Andrea, Sinn-Behrendt; Ralph, Bruder

2012-01-01

In industrialized countries musculoskeletal disorders (MSD) play an import role and are often responsible for almost one third of the total sick leave. The changes in the demographic profiles, i.e. aging work forces might even worsen this situation in the future. For a highly productive and sustainable use of human resources in production systems, ergonomics offers high potentials. In the recent years the authors have developed several ergonomic risk assessment tools, especially for the use in automotive industries. These methods may be used during the planning phases in the Tech Centers as well as during the production phase at shop floor level. The tools might also be used for a standardized communication in between the Tech Center and the plants to improve the effects of "lessons learned" for the design and layout of workstations and processes and the optimization of vehicle components. This paper describes suitable risk assessment tools as well as the integration of these tools into the vehicle development process. It introduces a comprehensive management approach for the integration of ergonomics into the management of production systems.

Effects of a Story Map on Accelerated Reader Postreading Test Scores in Students with High-Functioning Autism

ERIC Educational Resources Information Center

Stringfield, Suzanne Griggs; Luscre, Deanna; Gast, David L.

2011-01-01

In this study, three elementary-aged boys with high-functioning autism (HFA) were taught to use a graphic organizer called a Story Map as a postreading tool during language arts instruction. Students learned to accurately complete the Story Map. The effect of the intervention on story recall was assessed within the context of a multiple-baseline…

Tools to Promote Shared Decision Making in Serious Illness: A Systematic Review.

PubMed

Austin, C Adrian; Mohottige, Dinushika; Sudore, Rebecca L; Smith, Alexander K; Hanson, Laura C

2015-07-01

Serious illness impairs function and threatens survival. Patients facing serious illness value shared decision making, yet few decision aids address the needs of this population. To perform a systematic review of evidence about decision aids and other exportable tools that promote shared decision making in serious illness, thereby (1) identifying tools relevant to the treatment decisions of seriously ill patients and their caregivers, (2) evaluating the quality of evidence for these tools, and (3) summarizing their effect on outcomes and accessibility for clinicians. We searched PubMed, CINAHL, and PsychInfo from January 1, 1995, through October 31, 2014, and identified additional studies from reference lists and other systematic reviews. Clinical trials with random or nonrandom controls were included if they tested print, video, or web-based tools for advance care planning (ACP) or decision aids for serious illness. We extracted data on the study population, design, results, and risk for bias using the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) criteria. Each tool was evaluated for its effect on patient outcomes and accessibility. Seventeen randomized clinical trials tested decision tools in serious illness. Nearly all the trials were of moderate or high quality and showed that decision tools improve patient knowledge and awareness of treatment choices. The available tools address ACP, palliative care and goals of care communication, feeding options in dementia, lung transplant in cystic fibrosis, and truth telling in terminal cancer. Five randomized clinical trials provided further evidence that decision tools improve ACP documentation, clinical decisions, and treatment received. Clinicians can access and use evidence-based tools to engage seriously ill patients in shared decision making. This field of research is in an early stage; future research is needed to develop novel decision aids for other serious diagnoses and key decisions. Health care delivery organizations should prioritize the use of currently available tools that are evidence based and effective.

Effects of weld damage on the dynamics of energy-absorbing lanyards.

PubMed

Katona, David N; Bennett, Charlie R; McKoryk, Michael; Brisson, Andre L; Sparrey, Carolyn J

2017-12-01

Manufacturers recommend removing fall protection system components from service for any indication of weld spatter or tool damage; however, little is known about the specific effects of lanyard damage on fall arrest dynamics. Thirty-two energy-absorbing lanyards were drop tested after being damaged with weld spatter, plasma torches and cutting tools and compared with new, undamaged lanyards. Two lanyards damaged with a plasma torch failed completely without deploying the energy absorber while weld spatter damage and tool cuts, up to two-thirds through the width of the webbing, had no effect on fall arrest dynamics. The results highlight the catastrophic implications of high-temperature damage to lanyard webbing resulting from plasma torches - which require immediate removal from service. In addition, the integrated energy absorber design in bungee-style lanyards makes them more susceptible to damage anywhere along the length. We therefore recommended against bungee lanyards for ironworkers and welders.

The Effects of Domestic Travel on the Attitudes of High School Seniors in the USA toward Travel as an Educational Tool.

ERIC Educational Resources Information Center

Wood, Ralph Merton

This descriptive study attempted to determine if domestic travel affected the attitudes of high school seniors in seeing the educational value of travel. Surveys were administered to 325 high school seniors of 3 different high schools to assess students' attitudes. Results indicate high school seniors generally do not have a positive attitude…

Low-power, high-speed 1-bit inexact Full Adder cell designs applicable to low-energy image processing

NASA Astrophysics Data System (ADS)

Zareei, Zahra; Navi, Keivan; Keshavarziyan, Peiman

2018-03-01

In this paper, three novel low-power and high-speed 1-bit inexact Full Adder cell designs are presented based on current mode logic in 32 nm carbon nanotube field effect transistor technology for the first time. The circuit-level figures of merits, i.e. power, delay and power-delay product as well as application-level metric such as error distance, are considered to assess the efficiency of the proposed cells over their counterparts. The effect of voltage scaling and temperature variation on the proposed cells is studied using HSPICE tool. Moreover, using MATLAB tool, the peak signal to noise ratio of the proposed cells is evaluated in an image-processing application referred to as motion detector. Simulation results confirm the efficiency of the proposed cells.

AOP-informed assessment of endocrine disruption in freshwater crustaceans

EPA Science Inventory

To date, most research focused on developing more efficient and cost effective methods to predict toxicity have focused on human biology. However, there is also a need for effective high throughput tools to predict toxicity to other species that perform critical ecosystem functio...

An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens.

PubMed

Ghafouri Moghaddam, Mohammad Hossein; Ghafouri Moghaddam, Mostafa; Rakhshani, Ehsan; Mokhtari, Azizollah

2017-01-01

A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventional methods generally require locating holes on the pinning block surface when labelling with a resulting risk to damage of the specimens. Insects of different orders can be labelled by this simple and effective tool.

An Upgrade Pinning Block: A Mechanical Practical Aid for Fast Labelling of the Insect Specimens

PubMed Central

Ghafouri Moghaddam, Mohammad Hossein; Rakhshani, Ehsan; Mokhtari, Azizollah

2017-01-01

Abstract A new mechanical innovation is described to deal with standard labelling of dried specimens on triangular cards and/or pinned specimens in personal and public collections. It works quickly, precisely, and easily and is very useful for maintaining label uniformity in collections. The tools accurately sets the position of labels in the shortest possible time. This tools has advantages including rapid processing, cost effectiveness, light weight, and high accuracy, compared to conventional methods. It is fully customisable, compact, and does not require specialist equipment to assemble. Conventional methods generally require locating holes on the pinning block surface when labelling with a resulting risk to damage of the specimens. Insects of different orders can be labelled by this simple and effective tool. PMID:29104440

A NASA-wide approach toward cost-effective, high-quality software through reuse

NASA Technical Reports Server (NTRS)

Scheper, Charlotte O. (Editor); Smith, Kathryn A. (Editor)

1993-01-01

NASA Langley Research Center sponsored the second Workshop on NASA Research in Software Reuse on May 5-6, 1992 at the Research Triangle Park, North Carolina. The workshop was hosted by the Research Triangle Institute. Participants came from the three NASA centers, four NASA contractor companies, two research institutes and the Air Force's Rome Laboratory. The purpose of the workshop was to exchange information on software reuse tool development, particularly with respect to tool needs, requirements, and effectiveness. The participants presented the software reuse activities and tools being developed and used by their individual centers and programs. These programs address a wide range of reuse issues. The group also developed a mission and goals for software reuse within NASA. This publication summarizes the presentations and the issues discussed during the workshop.

On the Impact of Illustrated Assessment Tool on Paragraph Writing of High School Graduates of Qom, Iran

ERIC Educational Resources Information Center

Bagheridoust, Esmaeil; Husseini, Zahra

2011-01-01

Writing as one important skill in language proficiency demands validity, hence high schools are real places in which valid results are needed for high-stake decisions. Unrealistic and non-viable tests result in improper and invalid interpretation and use. Illustrations without any written research have proved their effectiveness in whatsoever…

The Efficacy of Ultraviolet Radiation for Sterilizing Tools Used for Surgically Implanting Transmitters into Fish

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walker, Ricardo W.; Markillie, Lye Meng; Colotelo, Alison HA

Telemetry is frequently used to examine the behavior of fish, and the transmitters used are normally surgically implanted into the coelom of fish. Implantation requires the use of surgical tools such as scalpels, forceps, needle holders, and sutures. When several fish are implanted consecutively for large telemetry studies, it is common for surgical tools to be sterilized or, at minimum, disinfected between each use so that pathogens that may be present are not spread among fish. However, autoclaving tools can take a long period of time, and chemical sterilants or disinfectants can be harmful to both humans and fish andmore » have varied effectiveness. Ultraviolet (UV) radiation is commonly used to disinfect water in aquaculture facilities. However, this technology has not been widely used to sterilize tools for surgical implantation of transmitters in fish. To determine its efficacy for this application, Pacific Northwest National Laboratory researchers used UV radiation to disinfect surgical tools (i.e., forceps, needle holder, stab scalpel, and suture) that were exposed to one of four aquatic organisms that typically lead to negative health issues for salmonids. These organisms included Aeromonas salmonicida, Flavobacterium psychrophilum, Renibacterium salmoninarum, and Saprolegnia parasitica. Surgical tools were exposed to the bacteria by dipping them into a confluent suspension of three varying concentrations (i.e., low, medium, high). After exposure to the bacterial culture, tools were placed into a mobile Millipore UV sterilization apparatus. The tools were then exposed for three different time periods—2, 5, or 15 min. S. parasitica, a water mold, was tested using an agar plate method and forceps-pinch method. UV light exposures of 5 and 15 min were effective at killing all four organisms. UV light was also effective at killing Geobacillus stearothermophilus, the organism used as a biological indicator to verify effectiveness of steam sterilizers. These techniques appear to provide a quick alternative disinfection technique for some surgical tools that is less harmful to both humans and fish while not producing chemical waste. However, we do not recommend using these methods with tools that have overlapping parts or other structures that cannot be directly exposed to UV light such as needle holders.« less

Recent Advances in Algal Genetic Tool Development

DOE Office of Scientific and Technical Information (OSTI.GOV)

R. Dahlin, Lukas; T. Guarnieri, Michael

The goal of achieving cost-effective biofuels and bioproducts derived from algal biomass will require improvements along the entire value chain, including identification of robust, high-productivity strains and development of advanced genetic tools. Though there have been modest advances in development of genetic systems for the model alga Chlamydomonas reinhardtii, progress in development of algal genetic tools, especially as applied to non-model algae, has generally lagged behind that of more commonly utilized laboratory and industrial microbes. This is in part due to the complex organellar structure of algae, including robust cell walls and intricate compartmentalization of target loci, as well asmore » prevalent gene silencing mechanisms, which hinder facile utilization of conventional genetic engineering tools and methodologies. However, recent progress in global tool development has opened the door for implementation of strain-engineering strategies in industrially-relevant algal strains. Here, we review recent advances in algal genetic tool development and applications in eukaryotic microalgae.« less

Recent Advances in Algal Genetic Tool Development

DOE PAGES

R. Dahlin, Lukas; T. Guarnieri, Michael

2016-06-24

The goal of achieving cost-effective biofuels and bioproducts derived from algal biomass will require improvements along the entire value chain, including identification of robust, high-productivity strains and development of advanced genetic tools. Though there have been modest advances in development of genetic systems for the model alga Chlamydomonas reinhardtii, progress in development of algal genetic tools, especially as applied to non-model algae, has generally lagged behind that of more commonly utilized laboratory and industrial microbes. This is in part due to the complex organellar structure of algae, including robust cell walls and intricate compartmentalization of target loci, as well asmore » prevalent gene silencing mechanisms, which hinder facile utilization of conventional genetic engineering tools and methodologies. However, recent progress in global tool development has opened the door for implementation of strain-engineering strategies in industrially-relevant algal strains. Here, we review recent advances in algal genetic tool development and applications in eukaryotic microalgae.« less

Validation of the self-assessment teamwork tool (SATT) in a cohort of nursing and medical students.

PubMed

Roper, Lucinda; Shulruf, Boaz; Jorm, Christine; Currie, Jane; Gordon, Christopher J

2018-02-09

Poor teamwork has been implicated in medical error and teamwork training has been shown to improve patient care. Simulation is an effective educational method for teamwork training. Post-simulation reflection aims to promote learning and we have previously developed a self-assessment teamwork tool (SATT) for health students to measure teamwork performance. This study aimed to evaluate the psychometric properties of a revised self-assessment teamwork tool. The tool was tested in 257 medical and nursing students after their participation in one of several mass casualty simulations. Using exploratory and confirmatory factor analysis, the revised self-assessment teamwork tool was shown to have strong construct validity, high reliability, and the construct demonstrated invariance across groups (Medicine & Nursing). The modified SATT was shown to be a reliable and valid student self-assessment tool. The SATT is a quick and practical method of guiding students' reflection on important teamwork skills.

Autism screening and diagnosis in low resource settings: Challenges and opportunities to enhance research and services worldwide

PubMed Central

Elsabbagh, Mayada; Barbaro, Josephine; Gladstone, Melissa; Happe, Francesca; Hoekstra, Rosa A.; Lee, Li‐Ching; Rattazzi, Alexia; Stapel‐Wax, Jennifer; Stone, Wendy L.; Tager‐Flusberg, Helen; Thurm, Audrey; Tomlinson, Mark; Shih, Andy

2015-01-01

Most research into the epidemiology, etiology, clinical manifestations, diagnosis and treatment of autism is based on studies in high income countries. Moreover, within high income countries, individuals of high socioeconomic status are disproportionately represented among participants in autism research. Corresponding disparities in access to autism screening, diagnosis, and treatment exist globally. One of the barriers perpetuating this imbalance is the high cost of proprietary tools for diagnosing autism and for delivering evidence‐based therapies. Another barrier is the high cost of training of professionals and para‐professionals to use the tools. Open‐source and open access models provide a way to facilitate global collaboration and training. Using these models and technologies, the autism scientific community and clinicians worldwide should be able to work more effectively and efficiently than they have to date to address the global imbalance in autism knowledge and at the same time advance our understanding of autism and our ability to deliver cost‐effective services to everyone in need. Autism Res 2015, 8: 473–476. © 2015 International Society for Autism Research, Wiley Periodicals, Inc. PMID:26437907

Can trainees design and deliver a national audit of epistaxis management? A pilot of a secure web-based audit tool and research trainee collaboratives.

PubMed

Mehta, N; Williams, R J; Smith, M E; Hall, A; Hardman, J C; Cheung, L; Ellis, M P; Fussey, J M; Lakhani, R; McLaren, O; Nankivell, P C; Sharma, N; Yeung, W; Carrie, S; Hopkins, C

2017-06-01

To investigate the feasibility of a national audit of epistaxis management led and delivered by a multi-region trainee collaborative using a web-based interface to capture patient data. Six trainee collaboratives across England nominated one site each and worked together to carry out this pilot. An encrypted data capture tool was adapted and installed within the infrastructure of a university secure server. Site-lead feedback was assessed through questionnaires. Sixty-three patients with epistaxis were admitted over a two-week period. Site leads reported an average of 5 minutes to complete questionnaires and described the tool as easy to use. Data quality was high, with little missing data. Site-lead feedback showed high satisfaction ratings for the project (mean, 4.83 out of 5). This pilot showed that trainee collaboratives can work together to deliver an audit using an encrypted data capture tool cost-effectively, whilst maintaining the highest levels of data quality.

Assessing fidelity of cognitive behavioral therapy in rural VA clinics: design of a randomized implementation effectiveness (hybrid type III) trial.

PubMed

Cucciare, Michael A; Curran, Geoffrey M; Craske, Michelle G; Abraham, Traci; McCarthur, Michael B; Marchant-Miros, Kathy; Lindsay, Jan A; Kauth, Michael R; Landes, Sara J; Sullivan, Greer

2016-05-10

Broadly disseminating and implementing evidence-based psychotherapies with high fidelity, particularly cognitive behavioral therapy (CBT), has proved challenging for many health-care systems, including the Department of Veterans Affairs, especially in primary care settings such as small or remote clinics. A computer-based tool (based on the coordinated anxiety learning and management (CALM) program) was designed to support primary care-based mental health providers in delivering CBT. The objectives of this study are to modify the CALM tool to meet the needs of mental health clinicians in veterans affairs (VA) community-based outpatient clinics (CBOCs) and rural "veterans", use external facilitation to implement CBT and determine the effect of the CALM tool versus a manualized version of CALM to improve fidelity to the CBT treatment model, and conduct a needs assessment to understand how best to support future implementation of the CALM tool in routine care. Focus groups will inform the redesign of the CALM tool. Mental health providers at regional VA CBOCs; CBT experts; VA experts in implementation of evidence-based mental health practices; and veterans with generalized anxiety disorder, panic disorder, social anxiety disorder, posttraumatic stress disorder, "with or without" depression will be recruited. A hybrid type III design will be used to examine the effect of receiving CBT training plus either the CALM tool or a manual version of CALM on treatment fidelity. External facilitation will be used as the overarching strategy to implement both CBT delivery methods. Data will also be collected on symptoms of the targeted disorders. To help prepare for the future implementation of the CALM tool in VA CBOCs, we will perform an implementation need assessment with mental health providers participating in the clinical trial and their CBOC directors. This project will help inform strategies for delivering CBT with high fidelity in VA CBOCs to veterans with anxiety disorders and PTSD with or without depression. If successful, results of this study could be used to inform a national rollout of the CALM tool in VA CBOCs including providing recommendations for optimizing the adoption and sustained use of the computerized CALM tool among mental health providers in this setting. ClinicalTrials.gov, NCT02488551.

High fidelity simulations of infrared imagery with animated characters

NASA Astrophysics Data System (ADS)

Näsström, F.; Persson, A.; Bergström, D.; Berggren, J.; Hedström, J.; Allvar, J.; Karlsson, M.

2012-06-01

High fidelity simulations of IR signatures and imagery tend to be slow and do not have effective support for animation of characters. Simplified rendering methods based on computer graphics methods can be used to overcome these limitations. This paper presents a method to combine these tools and produce simulated high fidelity thermal IR data of animated people in terrain. Infrared signatures for human characters have been calculated using RadThermIR. To handle multiple character models, these calculations use a simplified material model for the anatomy and clothing. Weather and temperature conditions match the IR-texture used in the terrain model. The calculated signatures are applied to the animated 3D characters that, together with the terrain model, are used to produce high fidelity IR imagery of people or crowds. For high level animation control and crowd simulations, HLAS (High Level Animation System) has been developed. There are tools available to create and visualize skeleton based animations, but tools that allow control of the animated characters on a higher level, e.g. for crowd simulation, are usually expensive and closed source. We need the flexibility of HLAS to add animation into an HLA enabled sensor system simulation framework.

Quality and Efficiency Improvement Tools for Every Radiologist.

PubMed

Kudla, Alexei U; Brook, Olga R

2018-06-01

In an era of value-based medicine, data-driven quality improvement is more important than ever to ensure safe and efficient imaging services. Familiarity with high-value tools enables all radiologists to successfully engage in quality and efficiency improvement. In this article, we review the model for improvement, strategies for measurement, and common practical tools with real-life examples that include Run chart, Control chart (Shewhart chart), Fishbone (Cause-and-Effect or Ishikawa) diagram, Pareto chart, 5 Whys, and Root Cause Analysis. Copyright © 2018 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

High speed turning of compacted graphite iron using controlled modulation

NASA Astrophysics Data System (ADS)

Stalbaum, Tyler Paul

Compacted graphite iron (CGI) is a material which emerged as a candidate material to replace cast iron (CI) in the automotive industry for engine block castings. Its thermal and mechanical properties allow the CGI-based engines to operate at higher cylinder pressures and temperatures than CI-based engines, allowing for lower fuel emissions and increased fuel economy. However, these same properties together with the thermomechanical wear mode in the CGI-CBN system result in poor machinability and inhibit CGI from seeing wide spread use in the automotive industry. In industry, machining of CGI is done only at low speeds, less than V = 200 m/min, to avoid encountering rapid wear of the cutting tools during cutting. Studies have suggested intermittent cutting operations such as milling suffer less severe tool wear than continuous cutting. Furthermore, evidence that a hard sulfide layer which forms over the cutting edge in machining CI at high speeds is absent during machining CGI is a major factor in the difference in machinability of these material systems. The present study addresses both of these issues by modification to the conventional machining process to allow intermittent continuous cutting. The application of controlled modulation superimposed onto the cutting process -- modulation-assisted machining (MAM) -- is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining CGI at high machining speeds (> 500 m/min). The tool life is at least 20 times greater than found in conventional machining of CGI. This significant reduction in wear is a consequence of reduction in the severity of the tool-work contact conditions with MAM. The propensity for thermochemical wear of CBN is thus reduced. It is found that higher cutting speed (> 700 m/min) leads to lower tool wear with MAM. The MAM configuration employing feed-direction modulation appears feasible for implementation at high speeds and offers a solution to this challenging class of industrial machining applications. This study's approach is by series of high speed turning tests of CGI with CBN tools, comparing conventional machining to MAM for similar parameters otherwise, by tool wear measurements and machinability observations.

Chemical Editing of Macrocyclic Natural Products and Kinetic Profiling Reveal Slow, Tight-Binding Histone Deacetylase Inhibitors with Picomolar Affinities.

PubMed

Kitir, Betül; Maolanon, Alex R; Ohm, Ragnhild G; Colaço, Ana R; Fristrup, Peter; Madsen, Andreas S; Olsen, Christian A

2017-09-26

Histone deacetylases (HDACs) are validated targets for treatment of certain cancer types and play numerous regulatory roles in biology, ranging from epigenetics to metabolism. Small molecules are highly important as tool compounds for probing these mechanisms as well as for the development of new medicines. Therefore, detailed mechanistic information and precise characterization of the chemical probes used to investigate the effects of HDAC enzymes are vital. We interrogated Nature's arsenal of macrocyclic nonribosomal peptide HDAC inhibitors by chemical synthesis and evaluation of more than 30 natural products and analogues. This furnished surprising trends in binding affinities for the various macrocycles, which were then exploited for the design of highly potent class I and IIb HDAC inhibitors. Furthermore, thorough kinetic investigation revealed unexpected inhibitory mechanisms of important tool compounds as well as the approved drug Istodax (romidepsin). This work provides novel inhibitors with varying potencies, selectivity profiles, and mechanisms of inhibition and, importantly, affords insight into known tool compounds that will improve the interpretation of their effects in biology and medicine.

Pilot testing of a burn prevention teaching tool for Amish children.

PubMed

Rieman, Mary T; Kagan, Richard J

2012-01-01

Burn prevention education for Amish children is warranted as there are unique risks associated with the Amish lifestyle. Specific educational opportunities are related to scalds, ignition of clothing, and ignition of highly flammable materials. A culturally sensitive burn prevention teaching tool, consisting of a magnetic storyboard, burn safety curriculum, and tests, was developed with the cooperation of one Old Order Amish community. The purpose of this study was to test the effectiveness of the tool in an Amish school. The teacher obtained parental permission and informed assent for the participation of the children. Pretesting was completed before the lessons began. The teacher told stories and arranged the magnets on the storyboard to show burn hazards involving lighters, stoves, kerosene heaters, gasoline-powered engines, and hot liquids used for canning, butchering, mopping, washing clothes, and making lye soap. The children were challenged to rearrange the pieces for a safer situation. Posttesting was performed 2 months after the pretest. Twenty-seven students (grades 1-8) participated. Tests were scored as a percentage of the 33 items answered correctly. The mean pretest score was 62 and the mean posttest score was 83. Statistical analysis using paired t-test demonstrated a highly significant improvement in test scores (P < .0001), with a power of more than 99%. This pilot study demonstrated that the burn prevention teaching tool was effective for improving knowledge in one classroom of Amish children. These results support expanded use and testing of this tool in other Amish schools.

Effect of Cutting Parameters on Thrust Force and Surface Roughness in Drilling of Al-2219/B4C/Gr Metal Matrix Composites

NASA Astrophysics Data System (ADS)

Ravindranath, V. M.; Basavarajappa, G. S. Shiva Shankar S.; Suresh, R.

2016-09-01

In aluminium matrix composites, reinforcement of hard ceramic particle present inside the matrix which causes tool wear, high cutting forces and poor surface finish during machining. This paper focuses on effect of cutting parameters on thrust force, surface roughness and burr height during drilling of MMCs. In the present work, discuss the influence of spindle speed and feed rate on drilling the pure base alloy (Al-2219), mono composite (Al- 2219+8% B4C) and hybrid composite (Al-2219+8%B4C+3%Gr). The composites were fabricated using liquid metallurgy route. The drilling experiments were conducted by CNC machine with TiN coated HSS tool, M42 (Cobalt grade) and carbide tools at various spindle speeds and feed rates. The thrust force, surface roughness and burr height of the drilled hole were investigated in mono composite and hybrid composite containing graphite particles, the experimental results show that the feed rate has more influence on thrust force and surface roughness. Lesser thrust force and discontinuous chips were produced during machining of hybrid composites when compared with mono and base alloy during drilling process. It is due to solid lubricant property of graphite which reduces the lesser thrust force, burr height and lower surface roughness. When machining with Carbide tool at low feed and high speeds good surface finish was obtained compared to other two types of cutting tool materials.

The Mutation Breeding and Mutagenic Effect of Air Plasma on Penicillium Chrysogenum

NASA Astrophysics Data System (ADS)

Gui, Fang; Wang, Hui; Wang, Peng; Liu, Hui; Cai, Xiaochun; Hu, Yihua; Yuan, Chengling; Zheng, Zhiming

2012-04-01

Low temperature air plasma was used as the mutation tool for penicillin-producing strain Penicillium chrysogenum. The discharge conditions were RF power of 360 W, temperature of 40°C in a sealed chamber, and pressure of 10 Pa to 30 Pa. The result showed that the kinetics of the survival rate followed a typical saddle-shaped curve. Based on a statistic analysis, at the treating duration of 10 min, the positive mutation rate was as high as 37.5% while the negative mutation rate was low. The colonial morphology changed obviously when the plasma treating duration reached or exceeded 45 min. After both primary and secondary screening, a mutant designated as aPc051310 with high productivity of penicillin was obtained, and a strong mutagenic effect on P. chrysogenum was observed in the process. It was proved that after five generations, the mutant aPc051310 still exhibits a high productivity. All the results prove that the plasma mutation method could be developed as a convenient and effective tool to breed high-yield strains in the fermentation industry, while expanding the plasm application at the same time.

High Performance Computing Modeling Advances Accelerator Science for High-Energy Physics

DOE PAGES

Amundson, James; Macridin, Alexandru; Spentzouris, Panagiotis

2014-07-28

The development and optimization of particle accelerators are essential for advancing our understanding of the properties of matter, energy, space, and time. Particle accelerators are complex devices whose behavior involves many physical effects on multiple scales. Therefore, advanced computational tools utilizing high-performance computing are essential for accurately modeling them. In the past decade, the US Department of Energy's SciDAC program has produced accelerator-modeling tools that have been employed to tackle some of the most difficult accelerator science problems. The authors discuss the Synergia framework and its applications to high-intensity particle accelerator physics. Synergia is an accelerator simulation package capable ofmore » handling the entire spectrum of beam dynamics simulations. Our authors present Synergia's design principles and its performance on HPC platforms.« less

COMBINE*: An integrated opto-mechanical tool for laser performance modeling

NASA Astrophysics Data System (ADS)

Rehak, M.; Di Nicola, J. M.

2015-02-01

Accurate modeling of thermal, mechanical and optical processes is important for achieving reliable, high-performance high energy lasers such as those at the National Ignition Facility [1] (NIF). The need for this capability is even more critical for high average power, high repetition rate applications. Modeling the effects of stresses and temperature fields on optical properties allows for optimal design of optical components and more generally of the architecture of the laser system itself. Stresses change the indices of refractions and induce inhomogeneities and anisotropy. We present a modern, integrated analysis tool that efficiently produces reliable results that are used in our laser propagation tools such as VBL [5]. COMBINE is built on and supplants the existing legacy tools developed for the previous generations of lasers at LLNL but also uses commercially available mechanical finite element codes ANSYS or COMSOL (including computational fluid dynamics). The COMBINE code computes birefringence and wave front distortions due to mechanical stresses on lenses and slabs of arbitrary geometry. The stresses calculated typically originate from mounting support, vacuum load, gravity, heat absorption and/or attending cooling. Of particular importance are the depolarization and detuning effects of nonlinear crystals due to thermal loading. Results are given in the form of Jones matrices, depolarization maps and wave front distributions. An incremental evaluation of Jones matrices and ray propagation in a 3D mesh with a stress and temperature field is performed. Wavefront and depolarization maps are available at the optical aperture and at slices within the optical element. The suite is validated, user friendly, supported, documented and amenable to collaborative development. * COMBINE stands for Code for Opto-Mechanical Birefringence Integrated Numerical Evaluations.

Algorithmic Classification of Five Characteristic Types of Paraphasias.

PubMed

Fergadiotis, Gerasimos; Gorman, Kyle; Bedrick, Steven

2016-12-01

This study was intended to evaluate a series of algorithms developed to perform automatic classification of paraphasic errors (formal, semantic, mixed, neologistic, and unrelated errors). We analyzed 7,111 paraphasias from the Moss Aphasia Psycholinguistics Project Database (Mirman et al., 2010) and evaluated the classification accuracy of 3 automated tools. First, we used frequency norms from the SUBTLEXus database (Brysbaert & New, 2009) to differentiate nonword errors and real-word productions. Then we implemented a phonological-similarity algorithm to identify phonologically related real-word errors. Last, we assessed the performance of a semantic-similarity criterion that was based on word2vec (Mikolov, Yih, & Zweig, 2013). Overall, the algorithmic classification replicated human scoring for the major categories of paraphasias studied with high accuracy. The tool that was based on the SUBTLEXus frequency norms was more than 97% accurate in making lexicality judgments. The phonological-similarity criterion was approximately 91% accurate, and the overall classification accuracy of the semantic classifier ranged from 86% to 90%. Overall, the results highlight the potential of tools from the field of natural language processing for the development of highly reliable, cost-effective diagnostic tools suitable for collecting high-quality measurement data for research and clinical purposes.

The Astronomy Workshop Extragalactic: Web Tools for Use by Students

NASA Astrophysics Data System (ADS)

Hayes-Gehrke, Melissa N.; Bolatto, A. D.

2014-01-01

The Astronomy Workshop Extragalactic (http://carma.astro.umd.edu/AWE) is a collection of interactive web tools that were developed for use in undergraduate and high school classes and by the general public. The focus of the tools is on concepts encountered in extragalactic astronomy, which are typically quite difficult for students to understand. Current tools explore Olbers' Paradox; the appearance of galaxies in different wavelengths of light; the Doppler Effect; cosmological redshift; gravitational lensing; Hubble's Law; cosmological parameters; and measuring masses of black holes by observing stellar orbits. The tools have been developed by undergraduate students under our supervision and we are planning to continue to add more tools. This project was inspired by the Astronomy Workshop (http://janus.astro.umd.edu) by Doug Hamilton which has web tools exploring more general astronomical concepts. We would like to thank the NSF for support through the CAREER grant NSF-AST0955836, and the Research Corporation for Science Advancement for a Cottrell Scholar award.

Effect of multiple forming tools on geometrical and mechanical properties in incremental sheet forming

NASA Astrophysics Data System (ADS)

Wernicke, S.; Dang, T.; Gies, S.; Tekkaya, A. E.

2018-05-01

The tendency to a higher variety of products requires economical manufacturing processes suitable for the production of prototypes and small batches. In the case of complex hollow-shaped parts, single point incremental forming (SPIF) represents a highly flexible process. The flexibility of this process comes along with a very long process time. To decrease the process time, a new incremental forming approach with multiple forming tools is investigated. The influence of two incremental forming tools on the resulting mechanical and geometrical component properties compared to SPIF is presented. Sheets made of EN AW-1050A were formed to frustums of a pyramid using different tool-path strategies. Furthermore, several variations of the tool-path strategy are analyzed. A time saving between 40% and 60% was observed depending on the tool-path and the radii of the forming tools while the mechanical properties remained unchanged. This knowledge can increase the cost efficiency of incremental forming processes.

Single cell proteomics in biomedicine: High-dimensional data acquisition, visualization, and analysis.

PubMed

Su, Yapeng; Shi, Qihui; Wei, Wei

2017-02-01

New insights on cellular heterogeneity in the last decade provoke the development of a variety of single cell omics tools at a lightning pace. The resultant high-dimensional single cell data generated by these tools require new theoretical approaches and analytical algorithms for effective visualization and interpretation. In this review, we briefly survey the state-of-the-art single cell proteomic tools with a particular focus on data acquisition and quantification, followed by an elaboration of a number of statistical and computational approaches developed to date for dissecting the high-dimensional single cell data. The underlying assumptions, unique features, and limitations of the analytical methods with the designated biological questions they seek to answer will be discussed. Particular attention will be given to those information theoretical approaches that are anchored in a set of first principles of physics and can yield detailed (and often surprising) predictions. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Microchip-Based Single-Cell Functional Proteomics for Biomedical Applications

PubMed Central

Lu, Yao; Yang, Liu; Wei, Wei; Shi, Qihui

2017-01-01

Cellular heterogeneity has been widely recognized but only recently have single cell tools become available that allow characterizing heterogeneity at the genomic and proteomic levels. We review the technological advances in microchip-based toolkits for single-cell functional proteomics. Each of these tools has distinct advantages and limitations, and a few have advanced toward being applied to address biological or clinical problems that fail to be addressed by traditional population-based methods. High-throughput single-cell proteomic assays generate high-dimensional data sets that contain new information and thus require developing new analytical framework to extract new biology. In this review article, we highlight a few biological and clinical applications in which the microchip-based single-cell proteomic tools provide unique advantages. The examples include resolving functional heterogeneity and dynamics of immune cells, dissecting cell-cell interaction by creating well-contolled on-chip microenvironment, capturing high-resolution snapshots of immune system functions in patients for better immunotherapy and elucidating phosphoprotein signaling networks in cancer cells for guiding effective molecularly targeted therapies. PMID:28280819

Development of a self-assessment tool for measuring competences of obstetric nurses in rooming-in wards in China

PubMed Central

Zhang, Ju; Ye, Wenqin; Fan, Fan

2015-01-01

Introduction: To provide high-quality nursing care, a reliable and feasible competency assessment tool is critical. Although several questionnaire-based competency assessment tools have been reported, a tool specific for obstetric nurses in rooming-in wards is lacking. Therefore, the purpose of this research is to develop a competency assessment tool for obstetric rooming-in ward nurses. Methods: A literature review was conducted to create an individual intensive interview with 14 nurse managers, educators, and primary nurses in rooming-in wards. Expert reviews (n = 15) were conducted to identify emergent themes in a Delphi fashion. A competency assessment questionnaire was then developed and tested with 246 rooming-in ward nurses in local hospitals. Results: We constructed a three-factor linear model for obstetric rooming-in nurse competency assessment. Further refinement resulted in a self-assessment questionnaire containing three first-tier, 12 second-tier, and 43 third-tier items for easy implementation. The questionnaire was reliable, contained satisfactory content, and had construct validity. Discussion: Our competency assessment tool provides a systematic, easy, and operational subjective evaluation model for nursing managers and administrators to evaluate obstetric rooming-in ward primary nurses. The application of this tool will facilitate various human resources functions, such as nurse training/education effect evaluation, and will eventually promote high-quality nursing care delivery. PMID:26770468

Assessing Bleeding Risk in Patients Taking Anticoagulants

PubMed Central

Shoeb, Marwa; Fang, Margaret C.

2013-01-01

Anticoagulant medications are commonly used for the prevention and treatment of thromboembolism. Although highly effective, they are also associated with significant bleeding risks. Numerous individual clinical factors have been linked to an increased risk of hemorrhage, including older age, anemia, and renal disease. To help quantify hemorrhage risk for individual patients, a number of clinical risk prediction tools have been developed. These risk prediction tools differ in how they were derived and how they identify and weight individual risk factors. At present, their ability to effective predict anticoagulant-associated hemorrhage remains modest. Use of risk prediction tools to estimate bleeding in clinical practice is most influential when applied to patients at the lower spectrum of thromboembolic risk, when the risk of hemorrhage will more strongly affect clinical decisions about anticoagulation. Using risk tools may also help counsel and inform patients about their potential risk for hemorrhage while on anticoagulants, and can identify patients who might benefit from more careful management of anticoagulation. PMID:23479259

The use of GIS tools for road infrastructure safety management

NASA Astrophysics Data System (ADS)

Budzyński, Marcin; Kustra, Wojciech; Okraszewska, Romanika; Jamroz, Kazimierz; Pyrchla, Jerzy

2018-01-01

There are many factors that influence accidents and their severity. They can be grouped within the system of man, vehicle and environment. The article focuses on how GIS tools can be used to manage road infrastructure safety. To ensure a better understanding and identification of road factors, GIS tools help with the acquisition of road parameter data. Their other role is helping with a clear and effective presentation of risk ranking. GIS is key to identifying high-risk sections and supports the effective communication of safety levels. This makes it a vital element of safety management. The article describes the use of GIS for the collection and visualisation of road parameter data which are not available in any of the existing databases, i.e. horizontal curve parameters. As we know from research and statistics, they are important factors that determine the safety of road infrastructure. Finally, new research is proposed as well as the possibilities for applying GIS tools for the purposes of road safety inspection.

Screening for non-alcoholic fatty liver disease in children: do guidelines provide enough guidance?

PubMed

Koot, B G P; Nobili, V

2017-09-01

Non-alcoholic fatty liver disease (NAFLD) is the most common chronic liver disease in the industrialized world in children. Its high prevalence and important health risks make NAFLD highly suitable for screening. In practice, screening is widely, albeit not consistently, performed. To review the recommendations on screening for NAFLD in children. Recommendations on screening were reviewed from major paediatric obesity guidelines and NAFLD guidelines. A literature overview is provided on open questions and controversies. Screening for NAFLD is advocated in all obesity and most NAFLD guidelines. Guidelines are not uniform in whom to screen, and most guidelines do not specify how screening should be performed in practice. Screening for NAFLD remains controversial, due to lack of a highly accurate screening tool, limited knowledge to predict the natural course of NAFLD and limited data on its cost effectiveness. Guidelines provide little guidance on how screening should be performed. Screening for NAFLD remains controversial because not all conditions for screening are fully met. Consensus is needed on the optimal use of currently available screening tools. Research should focus on new accurate screening tool, the natural history of NAFLD and the cost effectiveness of different screening strategies in children. © 2017 The Authors. Obesity Reviews published by John Wiley & Sons Ltd on behalf of World Obesity Federation.

The Effectiveness of Traditional and 21st Century Teaching Tools on Students' Science Learning

NASA Astrophysics Data System (ADS)

Bellflower, Julie V.

Any student seeking a high school diploma from the public school system in one U.S. state must pass the state's high school graduation test. In 2009, only 88% of students at one high school in the state met the basic proficiency requirements on the science portion of the test. Because improved science education has been identified as an explicit national goal, the purpose of this mixed methods study was to determine whether traditional teaching tools (notes, lecture, and textbook) or 21st century teaching tools (online tutorials, video games, YouTube, and virtual labs) lead to greater gains in students' science learning. Bruner's constructivist and Bandura's social cognitive theories served as the foundations for the study. Quantitative research questions were used to investigate the relationship between the type of teaching tools used and student learning gains. Quantitative data from students' pre and posttests were collected and analyzed using a dependent samples t-test. Qualitative data were collected through a focus group interview and participant journals. Analysis of the qualitative data included coding the data and writing a descriptive narrative to convey the findings. Results showed no statistically significant differences in students' science achievement: both types of teaching tools led to student learning gains. As a result, an action plan was developed to assist science educators in the implementation of traditional and 21st century teaching tools that can be used to improve students' science learning. Implications for positive social change included providing science educators with a specific plan of action that will enhance students' science learning, thereby increasing science scores on the state and other high stakes tests.

Improved the microstructures and properties of M3:2 high-speed steel by spray forming and niobium alloying

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lu, L.; Hou, L.G., E-mail: lghou@skl.ustb.edu.cn; Zhang, J.X.

The microstructures and properties of spray formed (SF) high-speed steels (HSSs) with or without niobium (Nb) addition were studied. Particular emphasis was placed on the effect of Nb on the solidification microstructures, decomposition of M{sub 2}C carbides, thermal stability and mechanical properties. The results show that spray forming can refine the cell size of eutectic carbides due to the rapid cooling effect during atomization. With Nb addition, further refinement of the eutectic carbides and primary austenite grains are obtained. Moreover, the Nb addition can accelerate the decomposition of M{sub 2}C carbides and increase the thermal stability of high-speed steel, andmore » also can improve the hardness and bending strength with slightly decrease the impact toughness. The high-speed steel made by spray forming and Nb alloying can give a better tool performance compared with powder metallurgy M3:2 and commercial AISI M2 high-speed steels. - Highlights: • Spray forming can effectively refine the microstructure of M3:2 steel. • Niobium accelerates the decomposition of M{sub 2}C carbides. • Niobium increases the hardness and bending strength of spray formed M3:2 steel. • Spray-formed niobium-containing M3:2 steel has the best tool performance.« less

The IHMC CmapTools software in research and education: a multi-level use case in Space Meteorology

NASA Astrophysics Data System (ADS)

Messerotti, Mauro

2010-05-01

The IHMC (Institute for Human and Machine Cognition, Florida University System, USA) CmapTools software is a powerful multi-platform tool for knowledge modelling in graphical form based on concept maps. In this work we present its application for the high-level development of a set of multi-level concept maps in the framework of Space Meteorology to act as the kernel of a space meteorology domain ontology. This is an example of a research use case, as a domain ontology coded in machine-readable form via e.g. OWL (Web Ontology Language) is suitable to be an active layer of any knowledge management system embedded in a Virtual Observatory (VO). Apart from being manageable at machine level, concept maps developed via CmapTools are intrinsically human-readable and can embed hyperlinks and objects of many kinds. Therefore they are suitable to be published on the web: the coded knowledge can be exploited for educational purposes by the students and the public, as the level of information can be naturally organized among linked concept maps in progressively increasing complexity levels. Hence CmapTools and its advanced version COE (Concept-map Ontology Editor) represent effective and user-friendly software tools for high-level knowledge represention in research and education.

Pre-exposure prophylaxis (PrEP) for men who have sex with men in Europe: review of evidence for a much needed prevention tool.

PubMed

Reyniers, Thijs; Hoornenborg, Elske; Vuylsteke, Bea; Wouters, Kristien; Laga, Marie

2017-08-01

In many Western countries with good coverage of antiretroviral treatment (ART) programmes the annual number of HIV infections is still high and not (yet) declining among men who have sex with men (MSM). This might indicate that antiretroviral treatment roll-out alone will not turn around the course of the epidemic and that new, additional tools are needed. Antiretrovirals used as prevention tools for people not yet infected with HIV, such as pre-exposure prophylaxis (PrEP) could be such important additional tools. PrEP is a new type of biomedical prevention, which involves the use of antiretrovirals before, during and after (periods of) sexual exposure to HIV. In this review, we will focus on PrEP as a new prevention tool for MSM at high risk in Europe, including its evidence for effectiveness, challenges for implementation, ongoing European demonstration studies; as well as how PrEP relates to other existing prevention tools. In light of European Medicines Agency's recent recommendation for approval of PrEP we briefly review the potential implications. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The in-situ 3D measurement system combined with CNC machine tools

NASA Astrophysics Data System (ADS)

Zhao, Huijie; Jiang, Hongzhi; Li, Xudong; Sui, Shaochun; Tang, Limin; Liang, Xiaoyue; Diao, Xiaochun; Dai, Jiliang

2013-06-01

With the development of manufacturing industry, the in-situ 3D measurement for the machining workpieces in CNC machine tools is regarded as the new trend of efficient measurement. We introduce a 3D measurement system based on the stereovision and phase-shifting method combined with CNC machine tools, which can measure 3D profile of the machining workpieces between the key machining processes. The measurement system utilizes the method of high dynamic range fringe acquisition to solve the problem of saturation induced by specular lights reflected from shiny surfaces such as aluminum alloy workpiece or titanium alloy workpiece. We measured two workpieces of aluminum alloy on the CNC machine tools to demonstrate the effectiveness of the developed measurement system.

Early wound infection identification using the WIRE tool in community health care settings: An audit report.

PubMed

Siaw-Sakyi, Vincent

2017-12-01

Wound infection is proving to be a challenge for health care professionals. The associated complications and cost of wound infection is immense and can lead to death in extreme cases. Current management of wound infection is largely subjective and relies on the knowledge of the health care professional to identify and initiate treatment. In response, we have developed an infection prediction and assessment tool. The Wound Infection Risk-Assessment and Evaluation tool (WIRE) and its management strategy is a tool with the aim to bring objectivity to infection prediction, assessment and management. A local audit carried out indicated a high infection prediction rate. More work is being done to improve its effectiveness.

Effects of an Approach Spacing Flight Deck Tool on Pilot Eyescan

NASA Technical Reports Server (NTRS)

Oseguera-Lohr, Rosa M.; Nadler, Eric D.

2004-01-01

An airborne tool has been developed based on the concept of an aircraft maintaining a time-based spacing interval from the preceding aircraft. The Advanced Terminal Area Approach Spacing (ATAAS) tool uses Automatic Dependent Surveillance-Broadcast (ADS-B) aircraft state data to compute a speed command for the ATAAS-equipped aircraft to obtain a required time interval behind another aircraft. The tool and candidate operational procedures were tested in a high-fidelity, full mission simulator with active airline subject pilots flying an arrival scenario using three different modes for speed control. Eyetracker data showed only slight changes in instrument scan patterns, and no significant change in the amount of time spent looking out the window with ATAAS, versus standard ILS procedures.

Modeling the Effects of Conservation Tillage on Water Quality at the Field Scale

USDA-ARS?s Scientific Manuscript database

The development and application of predictive tools to quantitatively assess the effects of tillage and related management activities should be carefully tested against high quality field data. This study reports on: 1) the calibration and validation of the Root Zone Water Quality Model (RZWQM) to a...

High School Students' Perceptions of Teaching and Their Intention to Choose Teaching as a Profession

ERIC Educational Resources Information Center

Cruz, Crystal

2013-01-01

This study was conducted to (a) explore high achieving high school students' perceptions of the teaching profession, (b) examine the influence of these perceptions on intentions to teach, and (c) test a recruitment suite of tools to determine the effectiveness of recruitment messaging and strategies. The Theory of Planned Behavior (TPB)…

Solutions to Address Diabetes-Related Financial Burden and Cost-Related Nonadherence: Results From a Pilot Study.

PubMed

Patel, Minal R; Resnicow, Kenneth; Lang, Ian; Kraus, Kathleen; Heisler, Michele

2018-02-01

Cost-related nonadherence (CRN) to recommended self-management behaviors among adults with chronic conditions such as diabetes is prevalent. Few behavioral interventions to mitigate CRN have been tested and evaluated. We developed a financial burden resource tool and examined its acceptability and the preliminary effects on patient-centered outcomes among adults with diabetes or prediabetes seen in a clinical setting. We report a pre-post one-group design pilot study. From an endocrinology clinic, we recruited 104 adults with diabetes who reported financial burdens with their diabetes management or engaged in CRN behaviors. We offered participants the financial burden resource tool we developed, which provided tailored, low-cost resource options for diabetes management and other social needs. Acceptability and self-reported outcomes were assessed 2 months after use of the tool. Mean age of participants was 50.5 years ( SD = 15.3). Participants found the tool highly acceptable across 15 indicators (e.g., 93% "learned a lot," 98% "topics relevant" 95% "applicable to their lives," 98% "liked the information"). Significant improvements between baseline and 2-month follow-up were observed for discussion of cost concerns with nurses (19% to 29%, p < .05) and pharmacists (13% to 25.5%, p < .01), not skipping doses of medicines due to cost (11% to 4%, p < .03), and financial management (33.83 to 39.62, p < .007). There were no significant changes in perception of financial burden. A financial burden resource tool is highly acceptable to patients, is easy to administer, and can prompt behavior change. This pilot study supports the need for well-powered trials with longer follow-up to further evaluate the effectiveness of such tools in improving CRN and key outcomes.

Solutions to Address Diabetes-Related Financial Burden and Cost-Related Nonadherence: Results From a Pilot Study

PubMed Central

Patel, Minal R.; Resnicow, Kenneth; Lang, Ian; Kraus, Kathleen; Heisler, Michele

2018-01-01

Background Cost-related nonadherence (CRN) to recommended self-management behaviors among adults with chronic conditions such as diabetes is prevalent. Few behavioral interventions to mitigate CRN have been tested and evaluated. Aims We developed a financial burden resource tool and examined its acceptability and the preliminary effects on patient-centered outcomes among adults with diabetes or prediabetes seen in a clinical setting. Method We report a pre–post one-group design pilot study. From an endocrinology clinic, we recruited 104 adults with diabetes who reported financial burdens with their diabetes management or engaged in CRN behaviors. We offered participants the financial burden resource tool we developed, which provided tailored, low-cost resource options for diabetes management and other social needs. Acceptability and self-reported outcomes were assessed 2 months after use of the tool. Results Mean age of participants was 50.5 years (SD = 15.3). Participants found the tool highly acceptable across 15 indicators (e.g., 93% “learned a lot,” 98% “topics relevant” 95% “applicable to their lives,” 98% “liked the information”). Significant improvements between baseline and 2-month followup were observed for discussion of cost concerns with nurses (19% to 29%, p < .05) and pharmacists (13% to 25.5%, p < .01), not skipping doses of medicines due to cost (11% to 4%, p < .03), and financial management (33.83 to 39.62, p < .007). There were no significant changes in perception of financial burden. Conclusion A financial burden resource tool is highly acceptable to patients, is easy to administer, and can prompt behavior change. This pilot study supports the need for well-powered trials with longer follow-up to further evaluate the effectiveness of such tools in improving CRN and key outcomes. PMID:28443371

Low thinning and crown thinning of two severities as restoration tools at Redwood National Park

USGS Publications Warehouse

Teraoka, Jason R; van Mantgem, Phillip J.; Keyes, Christopher R.

2017-01-01

Interest in the restoration of second-growth forests has continued to increase in the redwood region, which has further increased the importance of evaluating restoration-based silvicultural strategies. This study assessed the short-term effectiveness of four silvicultural treatments (two silvicultural thinning methods, low thinning and crown thinning, and two basal area retentions, 80 percent and 45 percent) as forest restoration tools via analysis of relative basal area growth at Redwood National Park. Prior to treatment, the second-growth stand had more than 1,600 trees ha-1 and 70.0 m2 ha-1 basal area and consisted primarily of two species, Douglas-fir (Pseudotsuga menziesii(Mirb.) Franco) (the dominant species) and redwood (Sequoia sempervirens (D. Don) Endl.). Growth was enhanced for all treatments with 5-year net basal area gains of 28.4 percent for the lowretention crown thinning, 28.1 percent for the low-retention low thinning, 23.3 percent for the high-retention crown thinning, 19.1 percent for high-retention low thinning, and only 14.2 percent for the control. We conclude that all four thinning treatments improved tree growth; but among them, the low-retention treatments were most effective in accomplishing restoration objectives, while the high-retention low thinning was least effective. Increasing the array of silvicultural tools that Redwood National Park can use may prove helpful in accomplishing restoration goals in future projects.

Thyroid sonography as an effective tool to discriminate between euthyroid sick and hypothyroid dogs.

PubMed

Reese, Sven; Breyer, Ulrike; Deeg, Cornelia; Kraft, Wilfried; Kaspers, Bernd

2005-01-01

The diagnosis of canine hypothyroidism and its differentiation from euthyroid sick syndrome still is a major diagnostic challenge. In this study, ultrasonography was shown to be an effective tool for the investigation of thyroid gland diseases. Healthy control dogs (n = 87), dogs with euthyroid sick syndrome (n = 26), thyroglobulin autoantibody-positive (TgAA-positive, n = 30) hypothyroid dogs, and TgAA-negative (n = 23) hypothyroid dogs were examined by thyroid ultrasonography. Maximal cross sectional area (MCSA), thyroid volume, and echogenicity were measured. Statistical analysis identified highly significant (P < .001) differences between euthyroid and hypothyroid dogs both in thyroid volume and in MCSA, whereas no significant differences in thyroid size were detected between healthy euthyroid dogs and dogs with euthyroid sick syndrome. In euthyroid and euthyroid sick dogs, parenchymal echotexture was homogeneous and hyperechoic, whereas relative thyroid echogenicity of both TgAA-positive and TgAA-negative hypothyroid dogs was significantly lower (P < .001). When using arbitrarily chosen cutoff values for relative thyroid volume, MCSA, and echogenicity, thyroid volume especially was found to have highly specific predictive value for canine hypothyroidism. In summary, the data reveal that thyroid sonography is an effective ancillary diagnostic tool to differentiate between canine hypothyroidism and euthyroid sick syndrome.

Current practices for evaluation of resonance disorders in North America.

PubMed

Stelck, Elizabeth Huebert; Boliek, Carol A; Hagler, Paul H; Rieger, Jana M

2011-02-01

Improving treatment outcomes for people with resonance problems (due to velopharyngeal disorders) is a priority for many speech-language pathologists (SLPs), but there exists a limited understanding of the practices SLPs are using to assess and monitor therapeutic effects in this population. The current study was designed to answer the following questions: (1) What are current clinical practices versus best practices for assessing resonance disorders, tracking therapeutic effects, and determining discharge criteria? (2) What assessment practices would SLPs prefer to use with clients who have resonance disorders? (3) What are barriers to SLPs' use of best practices? and (4) What effects do SLP demographics have on clinical practices? Thirty-eight SLPs, specializing in the treatment of resonance disorders, participated in the study. Responses were compared with best practice recommendations derived from the literature. Most clinicians were using low-tech assessment tools, often because they lacked access to high-tech tools. Demographics and training did not affect clinical assessment practices. There is a need to increase the availability of high-tech assessment tools to SLPs practicing in the area of resonance disorders, as consistent use of sophisticated assessment devices would exemplify contemporary thinking about the transfer of knowledge to practice in this area. © Thieme Medical Publishers.

A Quasi-Universal Nonword Repetition Task as a Diagnostic Tool for Bilingual Children Learning Dutch as a Second Language.

PubMed

Boerma, Tessel; Chiat, Shula; Leseman, Paul; Timmermeister, Mona; Wijnen, Frank; Blom, Elma

2015-12-01

This study evaluated a newly developed quasi-universal nonword repetition task (Q-U NWRT) as a diagnostic tool for bilingual children with language impairment (LI) who have Dutch as a 2nd language. The Q-U NWRT was designed to be minimally influenced by knowledge of 1 specific language in contrast to a language-specific NWRT with which it was compared. One hundred twenty monolingual and bilingual children with and without LI participated (30 per group). A mixed-design analysis of variance was used to investigate the effects of LI and bilingualism on the NWRTs. Receiver operating characteristic analyses were conducted to evaluate the instruments' diagnostic value. Large negative effects of LI were found on both NWRTs, whereas negative effects of bilingualism only occurred on the language-specific NWRT. Both instruments had high clinical accuracy in the monolingual group, but only the Q-U NWRT had high clinical accuracy in the bilingual group. This study indicates that the Q-U NWRT is a promising diagnostic tool to help identify LI in bilingual children learning Dutch as a 2nd language. The instrument was clinically accurate in both a monolingual and bilingual group of children and seems better able to disentangle LI from language disadvantage than more language-specific measures.

A Cluster Randomized-Controlled Trial of the Impact of the Tools of the Mind Curriculum on Self-Regulation in Canadian Preschoolers.

PubMed

Solomon, Tracy; Plamondon, Andre; O'Hara, Arland; Finch, Heather; Goco, Geraldine; Chaban, Peter; Huggins, Lorrie; Ferguson, Bruce; Tannock, Rosemary

2017-01-01

Early self-regulation predicts school readiness, academic success, and quality of life in adulthood. Its development in the preschool years is rapid and also malleable. Thus, preschool curricula that promote the development of self-regulation may help set children on a more positive developmental trajectory. We conducted a cluster-randomized controlled trial of the Tools of the Mind preschool curriculum, a program that targets self-regulation through imaginative play and self-regulatory language (Tools; clinical trials identifier NCT02462733). Previous research with Tools is limited, with mixed evidence of its effectiveness. Moreover, it is unclear whether it would benefit all preschoolers or primarily those with poorly developed cognitive capacities (e.g., language, executive function, attention). The study goals were to ascertain whether the Tools program leads to greater gains in self-regulation compared to Playing to Learn (YMCA PTL), another play based program that does not target self-regulation specifically, and whether the effects were moderated by children's initial language and hyperactivity/inattention. Two hundred and sixty 3- to 4-year-olds attending 20 largely urban daycares were randomly assigned, at the site level, to receive either Tools or YMCA PTL (the business-as-usual curriculum) for 15 months. We assessed self-regulation at pre-, mid and post intervention, using two executive function tasks, and two questionnaires regarding behavior at home and at school, to capture development in cognitive as well as socio-emotional aspects of self-regulation. Fidelity data showed that only the teachers at the Tools sites implemented Tools, and did so with reasonable success. We found that children who received Tools made greater gains on a behavioral measure of executive function than their YMCA PTL peers, but the difference was significant only for those children whose parents rated them high in hyperactivity/inattention initially. The effect of Tools did not vary with children's initial language skills. We suggest that, as both programs promote quality play and that the two groups fared similarly well overall, Tools and YMCA PTL may be effective curricula choices for a diverse preschool classroom. However, Tools may be advantageous in classrooms with children experiencing greater challenges with self-regulation, at no apparent cost to those less challenged in this regard.

A Cluster Randomized-Controlled Trial of the Impact of the Tools of the Mind Curriculum on Self-Regulation in Canadian Preschoolers

PubMed Central

Solomon, Tracy; Plamondon, Andre; O’Hara, Arland; Finch, Heather; Goco, Geraldine; Chaban, Peter; Huggins, Lorrie; Ferguson, Bruce; Tannock, Rosemary

2018-01-01

Early self-regulation predicts school readiness, academic success, and quality of life in adulthood. Its development in the preschool years is rapid and also malleable. Thus, preschool curricula that promote the development of self-regulation may help set children on a more positive developmental trajectory. We conducted a cluster-randomized controlled trial of the Tools of the Mind preschool curriculum, a program that targets self-regulation through imaginative play and self-regulatory language (Tools; clinical trials identifier NCT02462733). Previous research with Tools is limited, with mixed evidence of its effectiveness. Moreover, it is unclear whether it would benefit all preschoolers or primarily those with poorly developed cognitive capacities (e.g., language, executive function, attention). The study goals were to ascertain whether the Tools program leads to greater gains in self-regulation compared to Playing to Learn (YMCA PTL), another play based program that does not target self-regulation specifically, and whether the effects were moderated by children’s initial language and hyperactivity/inattention. Two hundred and sixty 3- to 4-year-olds attending 20 largely urban daycares were randomly assigned, at the site level, to receive either Tools or YMCA PTL (the business-as-usual curriculum) for 15 months. We assessed self-regulation at pre-, mid and post intervention, using two executive function tasks, and two questionnaires regarding behavior at home and at school, to capture development in cognitive as well as socio-emotional aspects of self-regulation. Fidelity data showed that only the teachers at the Tools sites implemented Tools, and did so with reasonable success. We found that children who received Tools made greater gains on a behavioral measure of executive function than their YMCA PTL peers, but the difference was significant only for those children whose parents rated them high in hyperactivity/inattention initially. The effect of Tools did not vary with children’s initial language skills. We suggest that, as both programs promote quality play and that the two groups fared similarly well overall, Tools and YMCA PTL may be effective curricula choices for a diverse preschool classroom. However, Tools may be advantageous in classrooms with children experiencing greater challenges with self-regulation, at no apparent cost to those less challenged in this regard. PMID:29403411

Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

NASA Technical Reports Server (NTRS)

Min, James B.

2005-01-01

The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

Wear-dependent specific coefficients in a mechanistic model for turning of nickel-based superalloy with ceramic tools

NASA Astrophysics Data System (ADS)

López de Lacalle, Luis Norberto; Urbicain Pelayo, Gorka; Fernández-Valdivielso, Asier; Alvarez, Alvaro; González, Haizea

2017-09-01

Difficult to cut materials such as nickel and titanium alloys are used in the aeronautical industry, the former alloys due to its heat-resistant behavior and the latter for the low weight - high strength ratio. Ceramic tools made out alumina with reinforce SiC whiskers are a choice in turning for roughing and semifinishing workpiece stages. Wear rate is high in the machining of these alloys, and consequently cutting forces tends to increase along one operation. This paper establishes the cutting force relation between work-piece and tool in the turning of such difficult-to-cut alloys by means of a mechanistic cutting force model that considers the tool wear effect. The cutting force model demonstrates the force sensitivity to the cutting engagement parameters (ap, f) when using ceramic inserts and wear is considered. Wear is introduced through a cutting time factor, being useful in real conditions taking into account that wear quickly appears in alloys machining. A good accuracy in the cutting force model coefficients is the key issue for an accurate prediction of turning forces, which could be used as criteria for tool replacement or as input for chatter or other models.

Left centro-parieto-temporal response to tool-gesture incongruity: an ERP study.

PubMed

Chang, Yi-Tzu; Chen, Hsiang-Yu; Huang, Yuan-Chieh; Shih, Wan-Yu; Chan, Hsiao-Lung; Wu, Ping-Yi; Meng, Ling-Fu; Chen, Chen-Chi; Wang, Ching-I

2018-03-13

Action semantics have been investigated in relation to context violation but remain less examined in relation to the meaning of gestures. In the present study, we examined tool-gesture incongruity by event-related potentials (ERPs) and hypothesized that the component N400, a neural index which has been widely used in both linguistic and action semantic congruence, is significant for conditions of incongruence. Twenty participants performed a tool-gesture judgment task, in which they were asked to judge whether the tool-gesture pairs were correct or incorrect, for the purpose of conveying functional expression of the tools. Online electroencephalograms and behavioral performances (the accuracy rate and reaction time) were recorded. The ERP analysis showed a left centro-parieto-temporal N300 effect (220-360 ms) for the correct condition. However, the expected N400 (400-550 ms) could not be differentiated between correct/incorrect conditions. After 700 ms, a prominent late negative complex for the correct condition was also found in the left centro-parieto-temporal area. The neurophysiological findings indicated that the left centro-parieto-temporal area is the predominant region contributing to neural processing for tool-gesture incongruity in right-handers. The temporal dynamics of tool-gesture incongruity are: (1) firstly enhanced for recognizable tool-gesture using patterns, (2) and require a secondary reanalysis for further examination of the highly complicated visual structures of gestures and tools. The evidence from the tool-gesture incongruity indicated altered brain activities attributable to the N400 in relation to lexical and action semantics. The online interaction between gesture and tool processing provided minimal context violation or anticipation effect, which may explain the missing N400.

An ultra-precision tool nanoindentation instrument for replication of single point diamond tool cutting edges

NASA Astrophysics Data System (ADS)

Cai, Yindi; Chen, Yuan-Liu; Xu, Malu; Shimizu, Yuki; Ito, So; Matsukuma, Hiraku; Gao, Wei

2018-05-01

Precision replication of the diamond tool cutting edge is required for non-destructive tool metrology. This paper presents an ultra-precision tool nanoindentation instrument designed and constructed for replication of the cutting edge of a single point diamond tool onto a selected soft metal workpiece by precisely indenting the tool cutting edge into the workpiece surface. The instrument has the ability to control the indentation depth with a nanometric resolution, enabling the replication of tool cutting edges with high precision. The motion of the diamond tool along the indentation direction is controlled by the piezoelectric actuator of a fast tool servo (FTS). An integrated capacitive sensor of the FTS is employed to detect the displacement of the diamond tool. The soft metal workpiece is attached to an aluminum cantilever whose deflection is monitored by another capacitive sensor, referred to as an outside capacitive sensor. The indentation force and depth can be accurately evaluated from the diamond tool displacement, the cantilever deflection and the cantilever spring constant. Experiments were carried out by replicating the cutting edge of a single point diamond tool with a nose radius of 2.0 mm on a copper workpiece surface. The profile of the replicated tool cutting edge was measured using an atomic force microscope (AFM). The effectiveness of the instrument in precision replication of diamond tool cutting edges is well-verified by the experimental results.

The iPlant Collaborative: Cyberinfrastructure for Enabling Data to Discovery for the Life Sciences.

PubMed

Merchant, Nirav; Lyons, Eric; Goff, Stephen; Vaughn, Matthew; Ware, Doreen; Micklos, David; Antin, Parker

2016-01-01

The iPlant Collaborative provides life science research communities access to comprehensive, scalable, and cohesive computational infrastructure for data management; identity management; collaboration tools; and cloud, high-performance, high-throughput computing. iPlant provides training, learning material, and best practice resources to help all researchers make the best use of their data, expand their computational skill set, and effectively manage their data and computation when working as distributed teams. iPlant's platform permits researchers to easily deposit and share their data and deploy new computational tools and analysis workflows, allowing the broader community to easily use and reuse those data and computational analyses.

Identifying high quality medical education websites in Otolaryngology: a guide for medical students and residents.

PubMed

Yang, Nathan; Hosseini, Sarah; Mascarella, Marco A; Young, Meredith; Posel, Nancy; Fung, Kevin; Nguyen, Lily H P

2017-05-25

Learners often utilize online resources to supplement formalized curricula, and to appropriately support learning, these resources should be of high quality. Thus, the objectives of this study are to develop and provide validity evidence supporting an assessment tool designed to assess the quality of educational websites in Otolaryngology- Head & Neck Surgery (ORL-HNS), and identify those that could support effective web-based learning. METHODS: After a literature review, the Modified Education in Otolaryngology Website (MEOW) assessment tool was designed by a panel of experts based on a previously validated website assessment tool. A search strategy using a Google-based search engine was used subsequently to identify websites. Those that were free of charge and in English were included. Websites were coded for whether their content targeted medical students or residents. Using the MEOW assessment tool, two independent raters scored the websites. Inter-rater and intra-rater reliability were evaluated, and scores were compared to recommendations from a content expert. The MEOW assessment tool included a total of 20 items divided in 8 categories related to authorship, frequency of revision, content accuracy, interactivity, visual presentation, navigability, speed and recommended hyperlinks. A total of 43 out of 334 websites identified by the search met inclusion criteria. The scores generated by our tool appeared to differentiate higher quality websites from lower quality ones: websites that the expert "would recommend" scored 38.4 (out of 56; CI [34.4-42.4]) and "would not recommend" 27.0 (CI [23.2-30.9]). Inter-rater and intra-rater intraclass correlation coefficient were greater than 0.7. Using the MEOW assessment tool, high quality ORL-HNS educational websites were identified.

Vibration and impulsivity analysis of hand held olive beaters.

PubMed

Deboli, Roberto; Calvo, Angela; Preti, Christian

2016-07-01

To provide more effective evaluations of hand arm vibration syndromes caused by hand held olive beaters, this study focused on two aspects: the acceleration measured at the tool pole and the analysis of the impulsivity, using the crest factor. The signals were frequency weighted using the weighting curve Wh as described in the ISO 5349-1 standard. The same source signals were also filtered by the Wh-bl filter (ISO/TS 15694), because the weighting filter Wh (unlike the Wh-bl filter) could underestimate the effect of high frequency vibration on vibration-induced finger disorders. Ten (experienced) male operators used three beater models (battery powered) in the real olive harvesting condition. High vibration total values were obtained with values never lower than 20 m(-2). Concerning the crest factor, the values ranged from 5 to more than 22. This work demonstrated that the hand held olive beaters produced high impulsive loads comparable to the industry hand held tools. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Cyclostationarity approach for monitoring chatter and tool wear in high speed milling

NASA Astrophysics Data System (ADS)

Lamraoui, M.; Thomas, M.; El Badaoui, M.

2014-02-01

Detection of chatter and tool wear is crucial in the machining process and their monitoring is a key issue, for: (1) insuring better surface quality, (2) increasing productivity and (3) protecting both machines and safe workpiece. This paper presents an investigation of chatter and tool wear using the cyclostationary method to process the vibrations signals acquired from high speed milling. Experimental cutting tests were achieved on slot milling operation of aluminum alloy. The experimental set-up is designed for acquisition of accelerometer signals and encoding information picked up from an encoder. The encoder signal is used for re-sampling accelerometers signals in angular domain using a specific algorithm that was developed in LASPI laboratory. The use of cyclostationary on accelerometer signals has been applied for monitoring chatter and tool wear in high speed milling. The cyclostationarity appears on average properties (first order) of signals, on the energetic properties (second order) and it generates spectral lines at cyclic frequencies in spectral correlation. Angular power and kurtosis are used to analyze chatter phenomena. The formation of chatter is characterized by unstable, chaotic motion of the tool and strong anomalous fluctuations of cutting forces. Results show that stable machining generates only very few cyclostationary components of second order while chatter is strongly correlated to cyclostationary components of second order. By machining in the unstable region, chatter results in flat angular kurtosis and flat angular power, such as a pseudo (white) random signal with flat spectrum. Results reveal that spectral correlation and Wigner Ville spectrum or integrated Wigner Ville issued from second-order cyclostationary are an efficient parameter for the early diagnosis of faults in high speed machining, such as chatter, tool wear and bearings, compared to traditional stationary methods. Wigner Ville representation of the residual signal shows that the energy corresponding to the tooth passing decreases when chatter phenomenon occurs. The effect of the tool wear and the number of broken teeth on the excitation of structure resonances appears in Wigner Ville presentation.

Learning Technology: Enhancing Learning in New Designs for the Comprehensive High School.

ERIC Educational Resources Information Center

Damyanovich, Mike; And Others

Technology, directed to each of the parts that collectively give shape and direction to the school, should provide the critical mass necessary to realize the specifications for the New Designs for the Comprehensive High School project. Learners should have access to personal productivity tools that increase effectiveness and efficiency in the…

Never Too Old for Stories (Tales of a High School Information Specialist).

ERIC Educational Resources Information Center

Fifield, Carol

1996-01-01

A high school library media specialist uses storytelling regularly in her oral presentations for students. For an audience of adolescents, stories need to be selected carefully and edited to keep the action moving. Music and character voices are effective in capturing and holding teenagers' attention. Storytelling is a tool for curriculum…

Designing High Fidelity Simulation to Maximize Student Registered Nursing Decision-Making Ability

ERIC Educational Resources Information Center

Deckers, Cathleen

2011-01-01

The current healthcare environment is a complex system of patients, procedures, and equipment that strives to deliver safe and effective medical care. High fidelity simulation provides healthcare educators with a tool to create safety conscious practitioners utilizing an environment that replicates practice without risk to patients. Using HFS…

An Advanced, Interactive, High-Performance Liquid Chromatography Simulator and Instructor Resources

ERIC Educational Resources Information Center

Boswell, Paul G.; Stoll, Dwight R.; Carr, Peter W.; Nagel, Megan L.; Vitha, Mark F.; Mabbott, Gary A.

2013-01-01

High-performance liquid chromatography (HPLC) simulation software has long been recognized as an effective educational tool, yet many of the existing HPLC simulators are either too expensive, outdated, or lack many important features necessary to make them widely useful for educational purposes. Here, a free, open-source HPLC simulator is…

More than a Conversation: Using Cogenerative Dialogues in the Professional Development of High School Chemistry Teachers

ERIC Educational Resources Information Center

Martin, Sonya N.; Scantlebury, Kathryn

2009-01-01

This paper focuses on content-based and pedagogical instructors' use of cogenerative dialogues to improve instructional practice and to evaluate program effectiveness in a professional development program for high school chemistry teachers. We share our research findings from using cogenerative dialogues as an evaluative tool for general…

Impaired drug absorption due to high stomach pH: a review of strategies for mitigation of such effect to enable pharmaceutical product development.

PubMed

Mitra, Amitava; Kesisoglou, Filippos

2013-11-04

Published reports have clearly shown that weakly basic drugs which have low solubility at high pH could have impaired absorption in patients with high gastric pH thus leading to reduced and variable bioavailability. Since such reduction in exposure can lead to significant loss of efficacy, it is imperative to (1) understand the behavior of the compound as a function of stomach pH to inform of any risk of bioavailability loss in clinical studies and (2) develop a robust formulation which can provide adequate exposure in achlorhydric patients. In this review paper, we provide an overview of the factors that can cause high gastric pH in human, discuss clinical and preclinical pharmacokinetic data for weak bases under conditions of normal and high gastric pH, and give examples of formulation strategies to minimize or mitigate the reduced absorption of weakly basic drugs under high gastric pH conditions. It should be noted that the ability to overcome pH sensitivity issues is highly compound dependent and there are no obvious and general solutions to overcome such effect. Further, we discuss, along with several examples, the use of biopharmaceutical tools such as in vitro dissolution, absorption modeling, and gastric pH modified animal models to assess absorption risk of weak bases in high gastric pH and also the use of these tools to enable development of formulations to mitigate such effects.

Diving deeper into Zebrafish development of social behavior: analyzing high resolution data.

PubMed

Buske, Christine; Gerlai, Robert

2014-08-30

Vertebrate model organisms have been utilized in high throughput screening but only with substantial cost and human capital investment. The zebrafish is a vertebrate model species that is a promising and cost effective candidate for efficient high throughput screening. Larval zebrafish have already been successfully employed in this regard (Lessman, 2011), but adult zebrafish also show great promise. High throughput screening requires the use of a large number of subjects and collection of substantial amount of data. Collection of data is only one of the demanding aspects of screening. However, in most screening approaches that involve behavioral data the main bottleneck that slows throughput is the time consuming aspect of analysis of the collected data. Some automated analytical tools do exist, but often they only work for one subject at a time, eliminating the possibility of fully utilizing zebrafish as a screening tool. This is a particularly important limitation for such complex phenotypes as social behavior. Testing multiple fish at a time can reveal complex social interactions but it may also allow the identification of outliers from a group of mutagenized or pharmacologically treated fish. Here, we describe a novel method using a custom software tool developed within our laboratory, which enables tracking multiple fish, in combination with a sophisticated analytical approach for summarizing and analyzing high resolution behavioral data. This paper focuses on the latter, the analytic tool, which we have developed using the R programming language and environment for statistical computing. We argue that combining sophisticated data collection methods with appropriate analytical tools will propel zebrafish into the future of neurobehavioral genetic research. Copyright © 2014. Published by Elsevier B.V.

Comparing the effectiveness of TWEAK and T-ACE in determining problem drinkers in pregnancy.

PubMed

Sarkar, M; Einarson, T; Koren, G

2010-01-01

The TWEAK and T-ACE screening tools are validated methods of identifying problem drinking in a pregnant population. The objective of this study was to compare the effectiveness of the TWEAK and T-ACE screening tools in identifying problem drinking using traditional cut-points (CP). Study participants consisted of women calling the Motherisk Alcohol Helpline for information regarding their alcohol use in pregnancy. In this cohort, concerns surrounding underreporting are not likely as women self-report their alcohol consumption. Participant's self-identification, confirmed by her amount of alcohol use, determined whether she was a problem drinker or not. The TWEAK and T-ACE tools were administered on both groups and subsequent analysis was done to determine if one tool was more effective in predicting problem drinking. The study consisted of 75 problem and 100 non-problem drinkers. Using traditional CP, the TWEAK and T-ACE tools both performed similarly at identifying potential at-risk women (positive predictive value = 0.54), with very high sensitivity rates (100-99% and 100-93%, respectively) but poor specificity rates (36-43% and 19-34%, respectively). Upon comparison, there was no statistical difference in the effectiveness for one test performing better than next using either CP of 2 (P = 0.66) or CP of 3 (P = 0.38). Despite the lack of difference in performance, improved specificity associated with TWEAK suggests that it may be better suited to screen at-risk populations seeking advice from a helpline.

HUMAN EXPOSURE MODELING: CONCEPTS, METHODS, AND TOOLS

EPA Science Inventory

Understanding human exposure is critical when estimating the occurrence of deleterious effects that could follow contact with environmental contaminants. For many pollutants, the intensity, duration, frequency, route, and timing of exposure is highly variable, particularly whe...

High-order dispersion effects in two-photon interference

NASA Astrophysics Data System (ADS)

Mazzotta, Zeudi; Cialdi, Simone; Cipriani, Daniele; Olivares, Stefano; Paris, Matteo G. A.

2016-12-01

Two-photon interference and Hong-Ou-Mandel (HOM) effect are relevant tools for quantum metrology and quantum information processing. In optical coherence tomography, the HOM effect is exploited to achieve high-resolution measurements with the width of the HOM dip being the main parameter. On the other hand, applications like dense coding require high-visibility performance. Here we address high-order dispersion effects in two-photon interference and study, theoretically and experimentally, the dependence of the visibility and the width of the HOM dip on both the pump spectrum and the downconverted photon spectrum. In particular, a spatial light modulator is exploited to experimentally introduce and manipulate a custom phase function to simulate the high-order dispersion effects. Overall, we show that it is possible to effectively introduce high-order dispersion effects on the propagation of photons and also to compensate for such effect. Our results clarify the role of the different dispersion phenomena and pave the way for optimization procedures in quantum technological applications involving PDC photons and optical fibers.

Community-based field implementation scenarios of a short message service reporting tool for lymphatic filariasis case estimates in Africa and Asia.

PubMed

Mableson, Hayley E; Martindale, Sarah; Stanton, Michelle C; Mackenzie, Charles; Kelly-Hope, Louise A

2017-01-01

Lymphatic filariasis (LF) is a neglected tropical disease (NTD) targeted for global elimination by 2020. Currently there is considerable international effort to scale-up morbidity management activities in endemic countries, however there remains a need for rapid, cost-effective methods and adaptable tools for obtaining estimates of people presenting with clinical manifestations of LF, namely lymphoedema and hydrocele. The mHealth tool ' MeasureSMS-Morbidity ' allows health workers in endemic areas to use their own mobile phones to send clinical information in a simple format using short message service (SMS). The experience gained through programmatic use of the tool in five endemic countries across a diversity of settings in Africa and Asia is used here to present implementation scenarios that are suitable for adapting the tool for use in a range of different programmatic, endemic, demographic and health system settings. A checklist of five key factors and sub-questions was used to determine and define specific community-based field implementation scenarios for using the MeasureSMS-Morbidity tool in a range of settings. These factors included: (I) tool feasibility (acceptability; community access and ownership); (II) LF endemicity (high; low prevalence); (III) population demography (urban; rural); (IV) health system structure (human resources; community access); and (V) integration with other diseases (co-endemicity). Based on experiences in Bangladesh, Ethiopia, Malawi, Nepal and Tanzania, four implementation scenarios were identified as suitable for using the MeasureSMS-Morbidity tool for searching and reporting LF clinical case data across a range of programmatic, endemic, demographic and health system settings. These include: (I) urban, high endemic setting with two-tier reporting; (II) rural, high endemic setting with one-tier reporting; (III) rural, high endemic setting with two-tier reporting; and (IV) low-endemic, urban and rural setting with one-tier reporting. A decision-making framework built from the key factors and questions, and the resulting four implementation scenarios is proposed as a means of using the MeasureSMS-Morbidity tool. This framework will help national LF programmes consider appropriate methods to implement a survey using this tool to improve estimates of the clinical burden of LF. Obtaining LF case estimates is a vital step towards the elimination of LF as a public health problem in endemic countries.

A study examining the effects of water-miscible cutting fluids for end milling process of carbon fiber reinforced plastic

NASA Astrophysics Data System (ADS)

Anan, Ruito; Matsuoka, Hironori; Ono, Hajime; Ryu, Takahiro; Nakae, Takashi; Shuto, Schuichi; Watanabe, Suguru; Sato, Yuta

2017-04-01

This study examined the improvements to the tool life and finished surface roughness by using water-miscible cutting fluids in carbon fiber reinforced plastics end milling. In cutting tests, it was found that the use of emulsion type, soluble type, and solution type cutting fluids improved tool life compared with the case of dry cutting. Specifically, significant differences in tool life were observed at a high cutting speed of 171 m/min. In addition, the finished surface exhibited a low level of roughness when the solution type cutting fluid was used, regardless of the cutting speed.

Machinability of hypereutectic silicon-aluminum alloys

NASA Astrophysics Data System (ADS)

Tanaka, T.; Akasawa, T.

1999-08-01

The machinability of high-silicon aluminum alloys made by a P/M process and by casting was compared. The cutting test was conducted by turning on lathes with the use of cemented carbide tools. The tool wear by machining the P/M alloy was far smaller than the tool wear by machining the cast alloy. The roughness of the machined surface of the P/M alloy is far better than that of the cast alloy, and the turning speed did not affect it greatly at higher speeds. The P/M alloy produced long chips, so the disposal can cause trouble. The size effect of silicon grains on the machinability is discussed.

Culture, communication and safety: lessons from the airline industry.

PubMed

d'Agincourt-Canning, Lori G; Kissoon, Niranjan; Singal, Mona; Pitfield, Alexander F

2011-06-01

Communication is a critical component of effective teamwork and both are essential elements in providing high quality of care to patients. Yet, communication is not an innate skill but a process influenced by internal (personal/cultural values) as well as external (professional roles and hierarchies) factors. To provide illustrative cases, themes and tools for improving communication. Literature review and consensus opinion based on extensive experience. Professional autonomy should be de-emphasized. Tools such as SBAR and simulation are important in communication and teamwork. Tools designed to improve communication and safety in the aviation industry may have applicability to the pediatric intensive care unit.

Using software to predict occupational hearing loss in the mining industry.

PubMed

Azman, A S; Li, M; Thompson, J K

2016-01-01

Powerful mining systems typically generate high-level noise that can damage the hearing ability of miners. Engineering noise controls are the most desirable and effective control for overexposure to noise. However, the effects of these noise controls on the actual hearing status of workers are not easily measured. A tool that can provide guidance in assigning workers to jobs based on the noise levels to which they will be exposed is highly desirable. Therefore, the Pittsburgh Mining Research Division (PMRD) of the U.S. National Institute for Occupational Safety and Health (NIOSH) developed a tool to estimate in a systematic way the hearing loss due to occupational noise exposure and to evaluate the effectiveness of developed engineering controls. This computer program is based on the ISO 1999 standard and can be used to estimate the loss of hearing ability caused by occupational noise exposures. In this paper, the functionalities of this software are discussed and several case studies related to mining machinery are presented to demonstrate the functionalities of this software.

A versatile genetic tool for post-translational control of gene expression in Drosophila melanogaster

PubMed Central

Sethi, Sachin

2017-01-01

Several techniques have been developed to manipulate gene expression temporally in intact neural circuits. However, the applicability of current tools developed for in vivo studies in Drosophila is limited by their incompatibility with existing GAL4 lines and side effects on physiology and behavior. To circumvent these limitations, we adopted a strategy to reversibly regulate protein degradation with a small molecule by using a destabilizing domain (DD). We show that this system is effective across different tissues and developmental stages. We further show that this system can be used to control in vivo gene expression levels with low background, large dynamic range, and in a reversible manner without detectable side effects on the lifespan or behavior of the animal. Additionally, we engineered tools for chemically controlling gene expression (GAL80-DD) and recombination (FLP-DD). We demonstrate the applicability of this technology in manipulating neuronal activity and for high-efficiency sparse labeling of neuronal populations. PMID:29140243

Machinability of titanium metal matrix composites (Ti-MMCs)

NASA Astrophysics Data System (ADS)

Aramesh, Maryam

Titanium metal matrix composites (Ti-MMCs), as a new generation of materials, have various potential applications in aerospace and automotive industries. The presence of ceramic particles enhances the physical and mechanical properties of the alloy matrix. However, the hard and abrasive nature of these particles causes various issues in the field of their machinability. Severe tool wear and short tool life are the most important drawbacks of machining this class of materials. There is very limited work in the literature regarding the machinability of this class of materials especially in the area of tool life estimation and tool wear. By far, polycrystalline diamond (PCD) tools appear to be the best choice for machining MMCs from researchers' point of view. However, due to their high cost, economical alternatives are sought. Cubic boron nitride (CBN) inserts, as the second hardest available tools, show superior characteristics such as great wear resistance, high hardness at elevated temperatures, a low coefficient of friction and a high melting point. Yet, so far CBN tools have not been studied during machining of Ti-MMCs. In this study, a comprehensive study has been performed to explore the tool wear mechanisms of CBN inserts during turning of Ti-MMCs. The unique morphology of the worn faces of the tools was investigated for the first time, which led to new insights in the identification of chemical wear mechanisms during machining of Ti-MMCs. Utilizing the full tool life capacity of cutting tools is also very crucial, due to the considerable costs associated with suboptimal replacement of tools. This strongly motivates development of a reliable model for tool life estimation under any cutting conditions. In this study, a novel model based on the survival analysis methodology is developed to estimate the progressive states of tool wear under any cutting conditions during machining of Ti-MMCs. This statistical model takes into account the machining time in addition to the effect of cutting parameters. Thus, promising results were obtained which showed a very good agreement with the experimental results. Moreover, a more advanced model was constructed, by adding the tool wear as another variable to the previous model. Therefore, a new model was proposed for estimating the remaining life of worn inserts under different cutting conditions, using the current tool wear data as an input. The results of this model were validated with the experimental results. The estimated results were well consistent with the results obtained from the experiments.

Integrated Analysis Tools for Determination of Structural Integrity and Durability of High temperature Polymer Matrix Composites

DTIC Science & Technology

2008-08-18

fidelity will be used to reduce the massive experimental testing and associated time required for qualification of new materials. Tools and...develping a model of the thermo-oxidative process for polymer systems, that incorporates the effects of reaction rates, Fickian diffusion, time varying...degradation processes. Year: 2005 Month: 12 Not required at this time . AIR FORCE OFFICE OF SCIENTIFIC KESEARCH 04 SEP 2008 Page 2 of 2 DTIC Data

High-resolution computational algorithms for simulating offshore wind turbines and farms: Model development and validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Calderer, Antoni; Yang, Xiaolei; Angelidis, Dionysios

2015-10-30

The present project involves the development of modeling and analysis design tools for assessing offshore wind turbine technologies. The computational tools developed herein are able to resolve the effects of the coupled interaction of atmospheric turbulence and ocean waves on aerodynamic performance and structural stability and reliability of offshore wind turbines and farms. Laboratory scale experiments have been carried out to derive data sets for validating the computational models.

Vulnerability of Coastal Wetlands in the Southeastern United States: Climate Change Research Results, 1992-97.

DTIC Science & Technology

1998-01-01

resource management and use of these public lands . Southeastern coastal wetlands have also been high priority areas for state fish and wildlife agencies...of landscape models and new satellite tech- nology to provide important tools for research and policy purposes that allow for effective land and...transgression. Hence, short- term rates of marsh transgression may be meaningless and may not be useful tools to predict wetland habitat change, at least

Management of Electronic Test Equipment. Volume 3. Organizations, Policies, and Procedures.

DTIC Science & Technology

1986-07-01

is not guaranteed. The best example, probably, is the UH - 60 Black Hawk program, where the specific tools used by organizational maintainers were nailed...tools. This innovative and highly effective approach was large!i, Successful. even though it became obvious once the UH - 60 was fielded, that a special...test set was necessary to cope with the electronic control unit assembly of the turbine engine. The UH - 60 example, however, does illustrate that support

Optimization of Microelectronic Devices for Sensor Applications

NASA Technical Reports Server (NTRS)

Cwik, Tom; Klimeck, Gerhard

2000-01-01

The NASA/JPL goal to reduce payload in future space missions while increasing mission capability demands miniaturization of active and passive sensors, analytical instruments and communication systems among others. Currently, typical system requirements include the detection of particular spectral lines, associated data processing, and communication of the acquired data to other systems. Advances in lithography and deposition methods result in more advanced devices for space application, while the sub-micron resolution currently available opens a vast design space. Though an experimental exploration of this widening design space-searching for optimized performance by repeated fabrication efforts-is unfeasible, it does motivate the development of reliable software design tools. These tools necessitate models based on fundamental physics and mathematics of the device to accurately model effects such as diffraction and scattering in opto-electronic devices, or bandstructure and scattering in heterostructure devices. The software tools must have convenient turn-around times and interfaces that allow effective usage. The first issue is addressed by the application of high-performance computers and the second by the development of graphical user interfaces driven by properly developed data structures. These tools can then be integrated into an optimization environment, and with the available memory capacity and computational speed of high performance parallel platforms, simulation of optimized components can proceed. In this paper, specific applications of the electromagnetic modeling of infrared filtering, as well as heterostructure device design will be presented using genetic algorithm global optimization methods.

Analysis tools for discovering strong parity violation at hadron colliders

NASA Astrophysics Data System (ADS)

Backović, Mihailo; Ralston, John P.

2011-07-01

Several arguments suggest parity violation may be observable in high energy strong interactions. We introduce new analysis tools to describe the azimuthal dependence of multiparticle distributions, or “azimuthal flow.” Analysis uses the representations of the orthogonal group O(2) and dihedral groups DN necessary to define parity completely in two dimensions. Classification finds that collective angles used in event-by-event statistics represent inequivalent tensor observables that cannot generally be represented by a single “reaction plane.” Many new parity-violating observables exist that have never been measured, while many parity-conserving observables formerly lumped together are now distinguished. We use the concept of “event-shape sorting” to suggest separating right- and left-handed events, and we discuss the effects of transverse and longitudinal spin. The analysis tools are statistically robust, and can be applied equally to low or high multiplicity events at the Tevatron, RHIC or RHIC Spin, and the LHC.

Identification of high-risk cutaneous melanoma tumors is improved when combining the online American Joint Committee on Cancer Individualized Melanoma Patient Outcome Prediction Tool with a 31-gene expression profile-based classification.

PubMed

Ferris, Laura K; Farberg, Aaron S; Middlebrook, Brooke; Johnson, Clare E; Lassen, Natalie; Oelschlager, Kristen M; Maetzold, Derek J; Cook, Robert W; Rigel, Darrell S; Gerami, Pedram

2017-05-01

A significant proportion of patients with American Joint Committee on Cancer (AJCC)-defined early-stage cutaneous melanoma have disease recurrence and die. A 31-gene expression profile (GEP) that accurately assesses metastatic risk associated with primary cutaneous melanomas has been described. We sought to compare accuracy of the GEP in combination with risk determined using the web-based AJCC Individualized Melanoma Patient Outcome Prediction Tool. GEP results from 205 stage I/II cutaneous melanomas with sufficient clinical data for prognostication using the AJCC tool were classified as low (class 1) or high (class 2) risk. Two 5-year overall survival cutoffs (AJCC 79% and 68%), reflecting survival for patients with stage IIA or IIB disease, respectively, were assigned for binary AJCC risk. Cox univariate analysis revealed significant risk classification of distant metastasis-free and overall survival (hazard ratio range 3.2-9.4, P < .001) for both tools. In all, 43 (21%) cases had discordant GEP and AJCC classification (using 79% cutoff). Eleven of 13 (85%) deaths in that group were predicted as high risk by GEP but low risk by AJCC. Specimens reflect tertiary care center referrals; more effective therapies have been approved for clinical use after accrual. The GEP provides valuable prognostic information and improves identification of high-risk melanomas when used together with the AJCC online prediction tool. Copyright © 2016 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

Research and development supporting risk-based wildfire effects prediction for fuels and fire management: Status and needs

Treesearch

Kevin Hyde; Matthew B. Dickinson; Gil Bohrer; David Calkin; Louisa Evers; Julie Gilbertson-Day; Tessa Nicolet; Kevin Ryan; Christina Tague

2013-01-01

Wildland fire management has moved beyond a singular focus on suppression, calling for wildfire management for ecological benefit where no critical human assets are at risk. Processes causing direct effects and indirect, long-term ecosystem changes are complex and multidimensional. Robust risk-assessment tools are required that account for highly variable effects on...

Functional Behavioral Assessment and Students at Risk for or with Emotional Disabilities: Current Issues and Considerations

ERIC Educational Resources Information Center

Gable, Robert A.; Park, Kristy Lee; Scott, Terrance M.

2014-01-01

The use of functional behavioral assessment (FBA) is an effective tool to address a wide range of severe behavior problems of students at risk for or with emotional disabilities (ED). However, the transformation of a procedure proven effective under highly-controlled clinical conditions to a practical and effective strategy for use in applied…

Decision support tool for diagnosing the source of variation

NASA Astrophysics Data System (ADS)

Masood, Ibrahim; Azrul Azhad Haizan, Mohamad; Norbaya Jumali, Siti; Ghazali, Farah Najihah Mohd; Razali, Hazlin Syafinaz Md; Shahir Yahya, Mohd; Azlan, Mohd Azwir bin

2017-08-01

Identifying the source of unnatural variation (SOV) in manufacturing process is essential for quality control. The Shewhart control chart patterns (CCPs) are commonly used to monitor the SOV. However, a proper interpretation of CCPs associated to its SOV requires a high skill industrial practitioner. Lack of knowledge in process engineering will lead to erroneous corrective action. The objective of this study is to design the operating procedures of computerized decision support tool (DST) for process diagnosis. The DST is an embedded tool in CCPs recognition scheme. Design methodology involves analysis of relationship between geometrical features, manufacturing process and CCPs. The DST contents information about CCPs and its possible root cause error and description on SOV phenomenon such as process deterioration in tool bluntness, offsetting tool, loading error, and changes in materials hardness. The DST will be useful for an industrial practitioner in making effective troubleshooting.

Optogenetic Tools for Subcellular Applications in Neuroscience.

PubMed

Rost, Benjamin R; Schneider-Warme, Franziska; Schmitz, Dietmar; Hegemann, Peter

2017-11-01

The ability to study cellular physiology using photosensitive, genetically encoded molecules has profoundly transformed neuroscience. The modern optogenetic toolbox includes fluorescent sensors to visualize signaling events in living cells and optogenetic actuators enabling manipulation of numerous cellular activities. Most optogenetic tools are not targeted to specific subcellular compartments but are localized with limited discrimination throughout the cell. Therefore, optogenetic activation often does not reflect context-dependent effects of highly localized intracellular signaling events. Subcellular targeting is required to achieve more specific optogenetic readouts and photomanipulation. Here we first provide a detailed overview of the available optogenetic tools with a focus on optogenetic actuators. Second, we review established strategies for targeting these tools to specific subcellular compartments. Finally, we discuss useful tools and targeting strategies that are currently missing from the optogenetics repertoire and provide suggestions for novel subcellular optogenetic applications. Copyright © 2017 Elsevier Inc. All rights reserved.

Visualization tool for human-machine interface designers

NASA Astrophysics Data System (ADS)

Prevost, Michael P.; Banda, Carolyn P.

1991-06-01

As modern human-machine systems continue to grow in capabilities and complexity, system operators are faced with integrating and managing increased quantities of information. Since many information components are highly related to each other, optimizing the spatial and temporal aspects of presenting information to the operator has become a formidable task for the human-machine interface (HMI) designer. The authors describe a tool in an early stage of development, the Information Source Layout Editor (ISLE). This tool is to be used for information presentation design and analysis; it uses human factors guidelines to assist the HMI designer in the spatial layout of the information required by machine operators to perform their tasks effectively. These human factors guidelines address such areas as the functional and physical relatedness of information sources. By representing these relationships with metaphors such as spring tension, attractors, and repellers, the tool can help designers visualize the complex constraint space and interacting effects of moving displays to various alternate locations. The tool contains techniques for visualizing the relative 'goodness' of a configuration, as well as mechanisms such as optimization vectors to provide guidance toward a more optimal design. Also available is a rule-based design checker to determine compliance with selected human factors guidelines.

The Effectiveness of Traditional and 21st Century Teaching Tools on Students' Science Learning

ERIC Educational Resources Information Center

Bellflower, Julie V.

2012-01-01

Any student seeking a high school diploma from the public school system in one U.S. state must pass the state's high school graduation test. In 2009, only 88% of students at one high school in the state met the basic proficiency requirements on the science portion of the test. Because improved science education has been identified as an explicit…

Impact of Virtual Learning Environment (VLE): A Technological Approach to Genetics Teaching on High School Students' Content Knowledge, Self-Efficacy and Career Goal Aspirations

ERIC Educational Resources Information Center

Kandi, Kamala M.

2013-01-01

This study examines the effect of a technology-based instructional tool "Geniverse" on the content knowledge gains, Science Self-Efficacy, Technology Self-Efficacy, and Career Goal Aspirations among 283 high school learners. The study was conducted in four urban high schools, two of which have achieved Adequate Yearly Progress (AYP) and…

Experimental and Numerical Examination of the Thermal Transmittance of High Performance Window Frames

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gustavsen Ph.D., Arild; Goudey, Howdy; Kohler, Christian

2010-06-17

While window frames typically represent 20-30percent of the overall window area, their impact on the total window heat transfer rates may be much larger. This effect is even greater in low-conductance (highly insulating) windows which incorporate very low conductance glazings. Developing low-conductance window frames requires accurate simulation tools for product research and development. The Passivhaus Institute in Germany states that windows (glazing and frames, combined) should have U-values not exceeding 0.80 W/(m??K). This has created a niche market for highly insulating frames, with frame U-values typically around 0.7-1.0 W/(m2 cdot K). The U-values reported are often based on numerical simulationsmore » according to international simulation standards. It is prudent to check the accuracy of these calculation standards, especially for high performance products before more manufacturers begin to use them to improve other product offerings. In this paper the thermal transmittance of five highly insulating window frames (three wooden frames, one aluminum frame and one PVC frame), found from numerical simulations and experiments, are compared. Hot box calorimeter results are compared with numerical simulations according to ISO 10077-2 and ISO 15099. In addition CFD simulations have been carried out, in order to use the most accurate tool available to investigate the convection and radiation effects inside the frame cavities. Our results show that available tools commonly used to evaluate window performance, based on ISO standards, give good overall agreement, but specific areas need improvement.« less

Human Factors Tools for Improving Simulation Activities in Continuing Medical Education

ERIC Educational Resources Information Center

Seagull, F. Jacob

2012-01-01

Human factors (HF) is a discipline often drawn upon when there is a need to train people to perform complex, high-stakes tasks and effectively assess their performance. Complex tasks often present unique challenges for training and assessment. HF has developed specialized techniques that have been effective in overcoming several of these…

Web-Based Intervention for Alcohol Use in Women of Childbearing Potential

ERIC Educational Resources Information Center

Howlett, Katia Delrahim

2010-01-01

There is a need for more effective assessment and primary prevention programs aimed at accurately measuring and reducing alcohol consumption among women before conception in underserved, high-risk populations. Health Information Technology (HIT) may serve this purpose; however, the effectiveness of such tools is not known. We conducted a…

Effects of Facebook Tutoring on Learning English as a Second Language

ERIC Educational Resources Information Center

Wang, Chang-hwa; Chen, Cheng-ping

2013-01-01

Social media use has become increasingly embedded in everyday life. Among various social media, Facebook is a highly interactive virtual social communication tool and it has become increasingly popular on college campuses. Research results have indicated that Facebook could be an effective platform for informal learning. However, most of current…

Effects of Thinking Style on Design Strategies: Using Bridge Construction Simulation Programs

ERIC Educational Resources Information Center

Sun, Chuen-Tsai; Wang, Dai-Yi; Chang, Yu-Yeh

2013-01-01

Computer simulation users can freely control operational factors and simulation results, repeat processes, make changes, and learn from simulation environment feedback. The focus of this paper is on simulation-based design tools and their effects on student learning processes in a group of 101 Taiwanese senior high school students. Participants…

Investigating the Effectiveness of Computer Simulations for Chemistry Learning

ERIC Educational Resources Information Center

Plass, Jan L.; Milne, Catherine; Homer, Bruce D.; Schwartz, Ruth N.; Hayward, Elizabeth O.; Jordan, Trace; Verkuilen, Jay; Ng, Florrie; Wang, Yan; Barrientos, Juan

2012-01-01

Are well-designed computer simulations an effective tool to support student understanding of complex concepts in chemistry when integrated into high school science classrooms? We investigated scaling up the use of a sequence of simulations of kinetic molecular theory and associated topics of diffusion, gas laws, and phase change, which we designed…

Situation Awareness and Workload Measures for SAFOR

NASA Technical Reports Server (NTRS)

DeMaio, Joe; Hart, Sandra G.; Allen, Ed (Technical Monitor)

1999-01-01

The present research was conducted in support of the NASA Safe All-Weather Flight Operations for Rotorcraft (SAFOR) program. The purpose of the work was to investigate the utility of two measurement tools developed by the British Defense Evaluation Research Agency. These tools were a subjective workload assessment scale, the DRA Workload Scale (DRAWS), and a situation awareness measurement tool in which the crews self-evaluation of performance is compared against actual performance. These two measurement tools were evaluated in the context of a test of an innovative approach to alerting the crew by way of a helmet mounted display. The DRAWS was found to be usable, but it offered no advantages over extant scales, and it had only limited resolution. The performance self-evaluation metric of situation awareness was found to be highly effective.

Fast and cheap fabrication of molding tools for polymer replication

NASA Astrophysics Data System (ADS)

Richter, Christiane; Kirschner, Nadine; Worgull, Matthias; Rapp, Bastian E.

2017-02-01

Polymer replication is a prerequisite for low-cost microstructure components for consumer and end user market. The production of cost-effective microstructure in polymers requires metal molding tools which are often fabricated by direct structuring methods like milling or laser machining both of which are time-consuming and cost-intensive. We present an alternative fabrication method based on replication processes which allows the cheap ( 50 €) and fast ( 12 h) replication of complex microstructures into metal. The process comprises three steps: 1. Generation of the microstructure in a photoresist via lithography. 2. Casting of the structure into a high-temperature silicone which serves as original mold for creation of the metal molding tool. 3. Melting of an eutectic alloy of Sn, Ag and Cu under light pressure directly inside of the silicone within an oven. After cooling to room temperature the metal molding tool can be used for polymer replication into conventional thermoplastic polymers. As a first example we structured polymethylmethacrylate (PMMA) foils with a thickness of 1 mm via hot embossing and feature sizes of 100 μm could be replicated with high fidelity.

Validation of an explanatory tool for data-fused displays for high-technology future aircraft

NASA Astrophysics Data System (ADS)

Fletcher, Georgina C. L.; Shanks, Craig R.; Selcon, Stephen J.

1996-05-01

As the number of sensor and data sources in the military cockpit increases, pilots will suffer high levels of workload which could result in reduced performance and the loss of situational awareness. A DRA research program has been investigating the use of data-fused displays in decision support and has developed and laboratory-tested an explanatory tool for displaying information in air combat scenarios. The tool has been designed to provide pictorial explanations of data that maintain situational awareness by involving the pilot in the hostile aircraft threat assessment task. This paper reports a study carried out to validate the success of the explanatory tool in a realistic flight simulation facility. Aircrew were asked to perform a threat assessment task, either with or without the explanatory tool providing information in the form of missile launch success zone envelopes, while concurrently flying a waypoint course within set flight parameters. The results showed that there was a significant improvement (p less than 0.01) in threat assessment accuracy of 30% when using the explanatory tool. This threat assessment performance advantage was achieved without a trade-off with flying task performance. Situational awareness measures showed no general differences between the explanatory and control conditions, but significant learning effects suggested that the explanatory tool makes the task initially more intuitive and hence less demanding on the pilots' attentional resources. The paper concludes that DRA's data-fused explanatory tool is successful at improving threat assessment accuracy in a realistic simulated flying environment, and briefly discusses the requirements for further research in the area.

Radiation and People

ERIC Educational Resources Information Center

Freilich, Florence G.

1970-01-01

Describes the development of radiation as a tool of medicine. Includes topics on history of radiation, electromagnetic spectrum, X-ray tubes, high energy machines, radioactive sources, artificial radioactivity, radioactive scanning, units, present radiation background, and effect of radiation on living tissue. (DS)

Estimating the Reliability of Electronic Parts in High Radiation Fields

NASA Technical Reports Server (NTRS)

Everline, Chester; Clark, Karla; Man, Guy; Rasmussen, Robert; Johnston, Allan; Kohlhase, Charles; Paulos, Todd

2008-01-01

Radiation effects on materials and electronic parts constrain the lifetime of flight systems visiting Europa. Understanding mission lifetime limits is critical to the design and planning of such a mission. Therefore, the operational aspects of radiation dose are a mission success issue. To predict and manage mission lifetime in a high radiation environment, system engineers need capable tools to trade radiation design choices against system design and reliability, and science achievements. Conventional tools and approaches provided past missions with conservative designs without the ability to predict their lifetime beyond the baseline mission.This paper describes a more systematic approach to understanding spacecraft design margin, allowing better prediction of spacecraft lifetime. This is possible because of newly available electronic parts radiation effects statistics and an enhanced spacecraft system reliability methodology. This new approach can be used in conjunction with traditional approaches for mission design. This paper describes the fundamentals of the new methodology.

A summer pharmacy camp for high school students as a pharmacy student recruitment tool.

PubMed

Myers, Tristan L; DeHart, Renee M; Dunn, Eddie B; Gardner, Stephanie F

2012-05-10

To determine the effectiveness of a summer pharmacy camp on participants' pursuit of enrollment in doctor of pharmacy degree programs. All participants (n = 135) in a pharmacy camp at the University of Arkansas for Medical Sciences (UAMS) College of Pharmacy from 2007-2010 were invited to complete an anonymous online survey instrument. Seventy-three students completed the survey instrument (54% response rate). Ninety-six percent of pharmacy camp participants said that they would recommend pharmacy camp to a friend, and 76% planned to apply or had applied to doctor of pharmacy degree program. Seven of the camp participants had enrolled in the UAMS College of Pharmacy. The pharmacy summer camp at UAMS is effective in maintaining high school students' interest in the profession of pharmacy. Continued use of the pharmacy camp program as a recruitment tool is warranted; however, additional research on this topic is needed.

Using population genetic tools to develop a control strategy for feral cats (Felis catus) in Hawai'i

USGS Publications Warehouse

Hansen, H.; Hess, S.C.; Cole, D.; Banko, P.C.

2007-01-01

Population genetics can provide information about the demographics and dynamics of invasive species that is beneficial for developing effective control strategies. We studied the population genetics of feral cats on Hawai'i Island by microsatellite analysis to evaluate genetic diversity and population structure, assess gene flow and connectivity among three populations, identify potential source populations, characterise population dynamics, and evaluate sex-biased dispersal. High genetic diversity, low structure, and high number of migrants per generation supported high gene flow that was not limited spatially. Migration rates revealed that most migration occurred out of West Mauna Kea. Effective population size estimates indicated increasing cat populations despite control efforts. Despite high gene flow, relatedness estimates declined significantly with increased geographic distance and Bayesian assignment tests revealed the presence of three population clusters. Genetic structure and relatedness estimates indicated male-biased dispersal, primarily from Mauna Kea, suggesting that this population should be targeted for control. However, recolonisation seems likely, given the great dispersal ability that may not be inhibited by barriers such as lava flows. Genetic monitoring will be necessary to assess the effectiveness of future control efforts. Management of other invasive species may benefit by employing these population genetic tools. ?? CSIRO 2007.

High Reliability Organizations--Medication Safety.

PubMed

Yip, Luke; Farmer, Brenna

2015-06-01

High reliability organizations (HROs), such as the aviation industry, successfully engage in high-risk endeavors and have low incidence of adverse events. HROs have a preoccupation with failure and errors. They analyze each event to effect system wide change in an attempt to mitigate the occurrence of similar errors. The healthcare industry can adapt HRO practices, specifically with regard to teamwork and communication. Crew resource management concepts can be adapted to healthcare with the use of certain tools such as checklists and the sterile cockpit to reduce medication errors. HROs also use The Swiss Cheese Model to evaluate risk and look for vulnerabilities in multiple protective barriers, instead of focusing on one failure. This model can be used in medication safety to evaluate medication management in addition to using the teamwork and communication tools of HROs.

Development of Minimally Invasive Medical Tools Using Laser Processing on Cylindrical Substrates

NASA Astrophysics Data System (ADS)

Haga, Yoichi; Muyari, Yuta; Goto, Shoji; Matsunaga, Tadao; Esashi, Masayoshi

This paper reports micro-fabrication techniques using laser processing on cylindrical substrates for the realization of high-performance multifunctional minimally invasive medical tools with small sizes. A spring-shaped shape memory alloy (SMA) micro-coil with a square cross section has been fabricated by spiral cutting of a Ti-Ni SMA tube with a femtosecond laser. Small diameter active bending catheter which is actuated by hydraulic suction mechanism for intravascular minimally invasive diagnostics and therapy has also been developed. The catheter is made of a Ti-Ni super elastic alloy (SEA) tube which is processed by laser micromachining and a silicone rubber tube which covers the outside of the SEA tube. The active catheter is effective for insertion in branch of blood vessel which diverse in acute angle which is difficult to proceed. Multilayer metallization and patterning have been performed on glass tubes with 2 and 3 mm external diameters using maskless lithography techniques using a laser exposure system. Using laser soldering technique, a integrated circuit parts have been mounted on a multilayer circuit patterned on a glass tube. These fabrication techniques will effective for realization of high-performance multifunctional catheters, endoscopic tools, and implanted small capsules.

Aspects of ultra-high-precision diamond machining of RSA 443 optical aluminium

NASA Astrophysics Data System (ADS)

Mkoko, Z.; Abou-El-Hossein, K.

2015-08-01

Optical aluminium alloys such as 6061-T6 are traditionally used in ultra-high precision manufacturing for making optical mirrors for aerospace and other applications. However, the optics industry has recently witnessed the development of more advanced optical aluminium grades that are capable of addressing some of the issues encountered when turning with single-point natural monocrystalline diamond cutters. The advent of rapidly solidified aluminium (RSA) grades has generally opened up new possibilities for ultra-high precision manufacturing of optical components. In this study, experiments were conducted with single-point diamond cutters on rapidly solidified aluminium RSA 443 material. The objective of this study is to observe the effects of depth of cut and feed rate at a fixed rotational speed on the tool wear rate and resulting surface roughness of diamond turned specimens. This is done to gain further understanding of the rate of wear on the diamond cutters versus the surface texture generated on the RSA 443 material. The diamond machining experiments yielded machined surfaces which are less reflective but with consistent surface roughness values. Cutting tools were observed for wear through scanning microscopy; relatively low wear pattern was evident on the diamond tool edge. The highest tool wear were obtained at higher depth of cut and increased feed rate.

Engineering a mobile health tool for resource-poor settings to assess and manage cardiovascular disease risk: SMARThealth study.

PubMed

Raghu, Arvind; Praveen, Devarsetty; Peiris, David; Tarassenko, Lionel; Clifford, Gari

2015-04-29

The incidence of chronic diseases in low- and middle-income countries is rapidly increasing both in urban and rural regions. A major challenge for health systems globally is to develop innovative solutions for the prevention and control of these diseases. This paper discusses the development and pilot testing of SMARTHealth, a mobile-based, point-of-care Clinical Decision Support (CDS) tool to assess and manage cardiovascular disease (CVD) risk in resource-constrained settings. Through pilot testing, the preliminary acceptability, utility, and efficiency of the CDS tool was obtained. The CDS tool was part of an mHealth system comprising a mobile application that consisted of an evidence-based risk prediction and management algorithm, and a server-side electronic medical record system. Through an agile development process and user-centred design approach, key features of the mobile application that fitted the requirements of the end users and environment were obtained. A comprehensive analytics framework facilitated a data-driven approach to investigate four areas, namely, system efficiency, end-user variability, manual data entry errors, and usefulness of point-of-care management recommendations to the healthcare worker. A four-point Likert scale was used at the end of every risk assessment to gauge ease-of-use of the system. The system was field-tested with eleven village healthcare workers and three Primary Health Centre doctors, who screened a total of 292 adults aged 40 years and above. 34% of participants screened by health workers were identified by the CDS tool to be high CVD risk and referred to a doctor. In-depth analysis of user interactions found the CDS tool feasible for use and easily integrable into the workflow of healthcare workers. Following completion of the pilot, further technical enhancements were implemented to improve uptake of the mHealth platform. It will then be evaluated for effectiveness and cost-effectiveness in a cluster randomized controlled trial involving 54 southern Indian villages and over 16000 individuals at high CVD risk. An evidence-based CVD risk prediction and management tool was used to develop an mHealth platform in rural India for CVD screening and management with proper engagement of health care providers and local communities. With over a third of screened participants being high risk, there is a need to demonstrate the clinical impact of the mHealth platform so that it could contribute to improved CVD detection in high risk low resource settings.

The nanomaterial toolkit for neuroengineering

NASA Astrophysics Data System (ADS)

Shah, Shreyas

2016-10-01

There is a growing interest in developing effective tools to better probe the central nervous system (CNS), to understand how it works and to treat neural diseases, injuries and cancer. The intrinsic complexity of the CNS has made this a challenging task for decades. Yet, with the extraordinary recent advances in nanotechnology and nanoscience, there is a general consensus on the immense value and potential of nanoscale tools for engineering neural systems. In this review, an overview of specialized nanomaterials which have proven to be the most effective tools in neuroscience is provided. After a brief background on the prominent challenges in the field, a variety of organic and inorganic-based nanomaterials are described, with particular emphasis on the distinctive properties that make them versatile and highly suitable in the context of the CNS. Building on this robust nano-inspired foundation, the rational design and application of nanomaterials can enable the generation of new methodologies to greatly advance the neuroscience frontier.

Interactive Tools for Measuring Visual Scanning Performance and Reaction Time

PubMed Central

Seeanner, Julia; Hennessy, Sarah; Manganelli, Joseph; Crisler, Matthew; Rosopa, Patrick; Jenkins, Casey; Anderson, Michael; Drouin, Nathalie; Belle, Leah; Truesdail, Constance; Tanner, Stephanie

2017-01-01

Occupational therapists are constantly searching for engaging, high-technology interactive tasks that provide immediate feedback to evaluate and train clients with visual scanning deficits. This study examined the relationship between two tools: the VISION COACH™ interactive light board and the Functional Object Detection© (FOD) Advanced driving simulator scenario. Fifty-four healthy drivers, ages 21–66 yr, were divided into three age groups. Participants performed braking response and visual target (E) detection tasks of the FOD Advanced driving scenario, followed by two sets of three trials using the VISION COACH Full Field 60 task. Results showed no significant effect of age on FOD Advanced performance but a significant effect of age on VISION COACH performance. Correlations showed that participants’ performance on both braking and E detection tasks were significantly positively correlated with performance on the VISION COACH (.37 < r < .40, p < .01). These tools provide new options for therapists. PMID:28218598

A temperature dependent cyclic plasticity model for hot work tool steel including particle coarsening

NASA Astrophysics Data System (ADS)

Jilg, Andreas; Seifert, Thomas

2018-05-01

Hot work tools are subjected to complex thermal and mechanical loads during hot forming processes. Locally, the stresses can exceed the material's yield strength in highly loaded areas as e.g. in small radii in die cavities. To sustain the high loads, the hot forming tools are typically made of martensitic hot work steels. While temperatures for annealing of the tool steels usually lie in the range between 400 and 600 °C, the steels may experience even higher temperatures during hot forming, resulting in softening of the material due to coarsening of strengthening particles. In this paper, a temperature dependent cyclic plasticity model for the martensitic hot work tool steel 1.2367 (X38CrMoV5-3) is presented that includes softening due to particle coarsening and that can be applied in finite-element calculations to assess the effect of softening on the thermomechanical fatigue life of hot work tools. To this end, a kinetic model for the evolution of the mean size of secondary carbides based on Ostwald ripening is coupled with a cyclic plasticity model with kinematic hardening. Mechanism-based relations are developed to describe the dependency of the mechanical properties on carbide size and temperature. The material properties of the mechanical and kinetic model are determined on the basis of tempering hardness curves as well as monotonic and cyclic tests.

Multidisciplinary Shape Optimization of a Composite Blended Wing Body Aircraft

NASA Astrophysics Data System (ADS)

Boozer, Charles Maxwell

A multidisciplinary shape optimization tool coupling aerodynamics, structure, and performance was developed for battery powered aircraft. Utilizing high-fidelity computational fluid dynamics analysis tools and a structural wing weight tool, coupled based on the multidisciplinary feasible optimization architecture; aircraft geometry is modified in the optimization of the aircraft's range or endurance. The developed tool is applied to three geometries: a hybrid blended wing body, delta wing UAS, the ONERA M6 wing, and a modified ONERA M6 wing. First, the optimization problem is presented with the objective function, constraints, and design vector. Next, the tool's architecture and the analysis tools that are utilized are described. Finally, various optimizations are described and their results analyzed for all test subjects. Results show that less computationally expensive inviscid optimizations yield positive performance improvements using planform, airfoil, and three-dimensional degrees of freedom. From the results obtained through a series of optimizations, it is concluded that the newly developed tool is both effective at improving performance and serves as a platform ready to receive additional performance modules, further improving its computational design support potential.

Comparing Computer Game and Traditional Lecture Using Experience Ratings from High and Low Achieving Students

ERIC Educational Resources Information Center

Grimley, Michael; Green, Richard; Nilsen, Trond; Thompson, David

2012-01-01

Computer games are purported to be effective instructional tools that enhance motivation and improve engagement. The aim of this study was to investigate how tertiary student experiences change when instruction was computer game based compared to lecture based, and whether experiences differed between high and low achieving students. Participants…

The Effectiveness of a Unit Study-Technology Approach within the High School Band Rehearsal Setting

ERIC Educational Resources Information Center

Gustafson-Hinds, Melissa A.

2010-01-01

The purpose of this research study was to investigate the usefulness of implementing a Comprehensive Musicianship (CMP)--Unit Study within a high school band rehearsal setting, using music technology as a supplementary tool. While previous studies have emphasized the many benefits of Comprehensive Musicianship, it is not clear how such an approach…

The Effect of Color Choice on Learner Interpretation of a Cosmology Visualization

ERIC Educational Resources Information Center

Buck, Zoe

2013-01-01

As we turn more and more to high-end computing to understand the Universe at cosmological scales, dynamic visualizations of simulations will take on a vital role as perceptual and cognitive tools. In collaboration with the Adler Planetarium and University of California High-Performance AstroComputing Center (UC-HiPACC), I am interested in better…

Effect of magnetic polarity on surface roughness during magnetic field assisted EDM of tool steel

NASA Astrophysics Data System (ADS)

Efendee, A. M.; Saifuldin, M.; Gebremariam, MA; Azhari, A.

2018-04-01

Electrical discharge machining (EDM) is one of the non-traditional machining techniques where the process offers wide range of parameters manipulation and machining applications. However, surface roughness, material removal rate, electrode wear and operation costs were among the topmost issue within this technique. Alteration of magnetic device around machining area offers exciting output to be investigated and the effects of magnetic polarity on EDM remain unacquainted. The aim of this research is to investigate the effect of magnetic polarity on surface roughness during magnetic field assisted electrical discharge machining (MFAEDM) on tool steel material (AISI 420 mod.) using graphite electrode. A Magnet with a force of 18 Tesla was applied to the EDM process at selected parameters. The sparks under magnetic field assisted EDM produced better surface finish than the normal conventional EDM process. At the presence of high magnetic field, the spark produced was squeezed and discharge craters generated on the machined surface was tiny and shallow. Correct magnetic polarity combination of MFAEDM process is highly useful to attain a high efficiency machining and improved quality of surface finish to meet the demand of modern industrial applications.

Clinical parameters that predict the need for medium or intensive care admission in intentional drug overdose patients: A retrospective cohort study.

PubMed

van den Oever, Huub L A; van Dam, Mirja; van 't Riet, Esther; Jansman, Frank G A

2017-02-01

Many patients with intentional drug overdose (IDO) are admitted to a medium (MC) or intensive care unit (IC) without ever requiring MC/IC related interventions. The objective of this study was to develop a decision tool, using parameters readily available in the emergency room (ER) for patients with an IDO, to identify patients requiring admission to a monitoring unit. Retrospective cohort study among cases of IDO with drugs having potentially acute effects on neurological, circulatory or ventilatory function, admitted to the MC/IC unit between 2007 and 2013. A decision tool was developed, using 6 criteria, representing intubation, breathing, oxygenation, cardiac conduction, blood pressure, and consciousness. Cases were labeled as 'high acuity' if one or more criteria were present. Among 255 cases of IDO that met the inclusion criteria, 197 were identified as "high acuity". Only 70 of 255 cases underwent one or more MC/IC related interventions, of which 67 were identified as 'high acuity by the decision tool (sensitivity 95.7%). In a population of patients with intentional drug overdose with agents having potentially acute effect on vital functions, 95.7% of MC/IC interventions could be predicted by clinical assessment, supplemented with electrocardiogram and blood gas analysis, in the ER. Copyright © 2016 Elsevier Inc. All rights reserved.

Writing in Chemistry: An Effective Learning Tool

NASA Astrophysics Data System (ADS)

Kovac, Jeffrey; Sherwood, Donna W.

1999-10-01

Writing is both a powerful learning tool and an important professional skill for chemists. We have developed a systematic approach to the integration of writing into the chemistry curriculum, which is described in detail in Writing Across the Chemistry Curriculum: A Faculty Handbook, available from the authors in a preliminary edition. The approach has been tested in high-enrollment sections of general chemistry at the University of Tennessee, Knoxville, with considerable success. This paper describes both the general approach and the specific implementation in the classroom.

Relations between mental health team characteristics and work role performance.

PubMed

Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie; Farand, Lambert

2017-01-01

Effective mental health care requires a high performing, interprofessional team. Among 79 mental health teams in Quebec (Canada), this exploratory study aims to 1) determine the association between work role performance and a wide range of variables related to team effectiveness according to the literature, and to 2) using structural equation modelling, assess the covariance between each of these variables as well as the correlation with other exogenous variables. Work role performance was measured with an adapted version of a work role questionnaire. Various independent variables including team manager characteristics, user characteristics, team profiles, clinical activities, organizational culture, network integration strategies and frequency/satisfaction of interactions with other teams or services were analyzed under the structural equation model. The later provided a good fit with the data. Frequent use of standardized procedures and evaluation tools (e.g. screening and assessment tools for mental health disorders) and team manager seniority exerted the most direct effect on work role performance. While network integration strategies had little effect on work role performance, there was a high covariance between this variable and those directly affecting work role performance among mental health teams. The results suggest that the mental healthcare system should apply standardized procedures and evaluation tools and, to a lesser extent, clinical approaches to improve work role performance in mental health teams. Overall, a more systematic implementation of network integration strategies may contribute to improved work role performance in mental health care.

Relations between mental health team characteristics and work role performance

PubMed Central

Grenier, Guy; Bamvita, Jean-Marie; Farand, Lambert

2017-01-01

Effective mental health care requires a high performing, interprofessional team. Among 79 mental health teams in Quebec (Canada), this exploratory study aims to 1) determine the association between work role performance and a wide range of variables related to team effectiveness according to the literature, and to 2) using structural equation modelling, assess the covariance between each of these variables as well as the correlation with other exogenous variables. Work role performance was measured with an adapted version of a work role questionnaire. Various independent variables including team manager characteristics, user characteristics, team profiles, clinical activities, organizational culture, network integration strategies and frequency/satisfaction of interactions with other teams or services were analyzed under the structural equation model. The later provided a good fit with the data. Frequent use of standardized procedures and evaluation tools (e.g. screening and assessment tools for mental health disorders) and team manager seniority exerted the most direct effect on work role performance. While network integration strategies had little effect on work role performance, there was a high covariance between this variable and those directly affecting work role performance among mental health teams. The results suggest that the mental healthcare system should apply standardized procedures and evaluation tools and, to a lesser extent, clinical approaches to improve work role performance in mental health teams. Overall, a more systematic implementation of network integration strategies may contribute to improved work role performance in mental health care. PMID:28991923

High-Speed Edge Trimming of CFRP and Online Monitoring of Performance of Router Tools Using Acoustic Emission

PubMed Central

Prakash, Rangasamy; Krishnaraj, Vijayan; Zitoune, Redouane; Sheikh-Ahmad, Jamal

2016-01-01

Carbon fiber reinforced polymers (CFRPs) have found wide-ranging applications in numerous industrial fields such as aerospace, automotive, and shipping industries due to their excellent mechanical properties that lead to enhanced functional performance. In this paper, an experimental study on edge trimming of CFRP was done with various cutting conditions and different geometry of tools such as helical-, fluted-, and burr-type tools. The investigation involves the measurement of cutting forces for the different machining conditions and its effect on the surface quality of the trimmed edges. The modern cutting tools (router tools or burr tools) selected for machining CFRPs, have complex geometries in cutting edges and surfaces, and therefore a traditional method of direct tool wear evaluation is not applicable. An acoustic emission (AE) sensing was employed for on-line monitoring of the performance of router tools to determine the relationship between AE signal and length of machining for different kinds of geometry of tools. The investigation showed that the router tool with a flat cutting edge has better performance by generating lower cutting force and better surface finish with no delamination on trimmed edges. The mathematical modeling for the prediction of cutting forces was also done using Artificial Neural Network and Regression Analysis. PMID:28773919

Multilayer composition coatings for cutting tools: formation and performance properties

NASA Astrophysics Data System (ADS)

Tabakov, Vladimir P.; Vereschaka, Anatoly S.; Vereschaka, Alexey A.

2018-03-01

The paper considers the concept of a multi-layer architecture of the coating in which each layer has a predetermined functionality. Latest generation of coatings with multi-layered architecture for cutting tools secure a dual nature of the coating, in which coatings should not only improve the mechanical and physical characteristics of the cutting tool material, but also reduce the thermo-mechanical effect on the cutting tool determining wear intensity. Here are presented the results of the development of combined methods of forming multi-layer coatings with improved properties. Combined method of forming coatings using a pulsed laser allowed reducing excessively high levels of compressive residual stress and increasing micro hardness of the multilayered coatings. The results in testing coated HSS tools showed that the use of additional pulse of laser processing increases tool life up to 3 times. Using filtered cathodic vacuum arc deposition for the generation of multilayer coatings based on TiAlN compound has increased the wear-resistance of carbide tools by 2 fold compared with tool life of cutting tool with commercial TiN coatings. The aim of this study was to develop an innovative methodological approach to the deposition of multilayer coatings for cutting tools with functional architectural selection, properties and parameters of the coating based on sound knowledge of coating failure in machining process.

Optimizing the ASC WAN: evaluating network performance tools for comparing transport protocols.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lydick, Christopher L.

2007-07-01

The Advanced Simulation & Computing Wide Area Network (ASC WAN), which is a high delay-bandwidth network connection between US Department of Energy National Laboratories, is constantly being examined and evaluated for efficiency. One of the current transport-layer protocols which is used, TCP, was developed for traffic demands which are different from that on the ASC WAN. The Stream Control Transport Protocol (SCTP), on the other hand, has shown characteristics which make it more appealing to networks such as these. Most important, before considering a replacement for TCP on any network, a testing tool that performs well against certain criteria needsmore » to be found. In order to try to find such a tool, two popular networking tools (Netperf v.2.4.3 & v.2.4.6 (OpenSS7 STREAMS), and Iperf v.2.0.6) were tested. These tools implement both TCP and SCTP and were evaluated using four metrics: (1) How effectively can the tool reach a throughput near the bandwidth? (2) How much of the CPU does the tool utilize during operation? (3) Is the tool freely and widely available? And, (4) Is the tool actively developed? Following the analysis of those tools, this paper goes further into explaining some recommendations and ideas for future work.« less

Low Thrust Orbital Maneuvers Using Ion Propulsion

NASA Astrophysics Data System (ADS)

Ramesh, Eric

2011-10-01

Low-thrust maneuver options, such as electric propulsion, offer specific challenges within mission-level Modeling, Simulation, and Analysis (MS&A) tools. This project seeks to transition techniques for simulating low-thrust maneuvers from detailed engineering level simulations such as AGI's Satellite ToolKit (STK) Astrogator to mission level simulations such as the System Effectiveness Analysis Simulation (SEAS). Our project goals are as follows: A) Assess different low-thrust options to achieve various orbital changes; B) Compare such approaches to more conventional, high-thrust profiles; C) Compare computational cost and accuracy of various approaches to calculate and simulate low-thrust maneuvers; D) Recommend methods for implementing low-thrust maneuvers in high-level mission simulations; E) prototype recommended solutions.

The iPlant Collaborative: Cyberinfrastructure for Enabling Data to Discovery for the Life Sciences

PubMed Central

Merchant, Nirav; Lyons, Eric; Goff, Stephen; Vaughn, Matthew; Ware, Doreen; Micklos, David; Antin, Parker

2016-01-01

The iPlant Collaborative provides life science research communities access to comprehensive, scalable, and cohesive computational infrastructure for data management; identity management; collaboration tools; and cloud, high-performance, high-throughput computing. iPlant provides training, learning material, and best practice resources to help all researchers make the best use of their data, expand their computational skill set, and effectively manage their data and computation when working as distributed teams. iPlant’s platform permits researchers to easily deposit and share their data and deploy new computational tools and analysis workflows, allowing the broader community to easily use and reuse those data and computational analyses. PMID:26752627

Differences among consumer segments with regard to perceptions of comparative effectiveness research.

PubMed

Williams, Sunyna S; Frost, Sloane L

2014-11-01

To examine differences among health-related decision-making consumer segments with regard to knowledge, skills, attitudes, and behaviors pertinent to comparative effectiveness research. Data were collected via an online survey from 603 adults with chronic conditions. Consumer segment was determined using a two-item tool. Active consumers (high skills and motivation) reported the highest levels of engagement in various behaviors. Passive consumers (low skills and motivation) reported the lowest levels of engagement in various behaviors. High-effort consumers (low skills, high motivation) reported more positive attitudes and opinions and more engagement in various behaviors than did complacent consumers (high skills, low motivation). Effective translation and dissemination of comparative effectiveness research will require the development of approaches tailored to consumers with varying levels of skills and motivation.

A study on using pre-forming blank in single point incremental forming process by finite element analysis

NASA Astrophysics Data System (ADS)

Abass, K. I.

2016-11-01

Single Point Incremental Forming process (SPIF) is a forming technique of sheet material based on layered manufacturing principles. The edges of sheet material are clamped while the forming tool is moved along the tool path. The CNC milling machine is used to manufacturing the product. SPIF involves extensive plastic deformation and the description of the process is more complicated by highly nonlinear boundary conditions, namely contact and frictional effects have been accomplished. However, due to the complex nature of these models, numerical approaches dominated by Finite Element Analysis (FEA) are now in widespread use. The paper presents the data and main results of a study on effect of using preforming blank in SPIF through FEA. The considered SPIF has been studied under certain process conditions referring to the test work piece, tool, etc., applying ANSYS 11. The results show that the simulation model can predict an ideal profile of processing track, the behaviour of contact tool-workpiece, the product accuracy by evaluation its thickness, surface strain and the stress distribution along the deformed blank section during the deformation stages.

Evaluation of the probability of arrester failure in a high-voltage transmission line using a Q learning artificial neural network model

NASA Astrophysics Data System (ADS)

Ekonomou, L.; Karampelas, P.; Vita, V.; Chatzarakis, G. E.

2011-04-01

One of the most popular methods of protecting high voltage transmission lines against lightning strikes and internal overvoltages is the use of arresters. The installation of arresters in high voltage transmission lines can prevent or even reduce the lines' failure rate. Several studies based on simulation tools have been presented in order to estimate the critical currents that exceed the arresters' rated energy stress and to specify the arresters' installation interval. In this work artificial intelligence, and more specifically a Q-learning artificial neural network (ANN) model, is addressed for evaluating the arresters' failure probability. The aims of the paper are to describe in detail the developed Q-learning ANN model and to compare the results obtained by its application in operating 150 kV Greek transmission lines with those produced using a simulation tool. The satisfactory and accurate results of the proposed ANN model can make it a valuable tool for designers of electrical power systems seeking more effective lightning protection, reducing operational costs and better continuity of service.

A software communication tool for the tele-ICU.

PubMed

Pimintel, Denise M; Wei, Shang Heng; Odor, Alberto

2013-01-01

The Tele Intensive Care Unit (tele-ICU) supports a high volume, high acuity population of patients. There is a high-volume of incoming and outgoing calls, especially during the evening and night hours, through the tele-ICU hubs. The tele-ICU clinicians must be able to communicate effectively to team members in order to support the care of complex and critically ill patients while supporting and maintaining a standard to improve time to intervention. This study describes a software communication tool that will improve the time to intervention, over the paper-driven communication format presently used in the tele-ICU. The software provides a multi-relational database of message instances to mine information for evaluation and quality improvement for all entities that touch the tele-ICU. The software design incorporates years of critical care and software design experience combined with new skills acquired in an applied Health Informatics program. This software tool will function in the tele-ICU environment and perform as a front-end application that gathers, routes, and displays internal communication messages for intervention by priority and provider.

High tax on high energy dense foods and its effects on the purchase of calories in a supermarket. An experiment.

PubMed

Nederkoorn, Chantal; Havermans, Remco C; Giesen, Janneke C A H; Jansen, Anita

2011-06-01

The present study examined whether a high tax on high calorie dense foods effectively reduces the purchased calories of high energy dense foods in a web based supermarket, and whether this effect is moderated by budget and weight status. 306 participants purchased groceries in a web based supermarket, with an individualized budget based on what they normally spend. Results showed that relative to the no tax condition, the participants in the tax condition bought less calories. The main reduction was found in high energy dense products and in calories from carbohydrates, but not in calories from fat. BMI and budget did not influence the effectiveness of the tax. The reduction in calories occurred regardless of budget or BMI implying that a food tax may be a beneficial tool, along with other measures, in promoting a diet with fewer calories. Copyright © 2011 Elsevier Ltd. All rights reserved.

The Nanoelectric Modeling Tool (NEMO) and Its Expansion to High Performance Parallel Computing

NASA Technical Reports Server (NTRS)

Klimeck, G.; Bowen, C.; Boykin, T.; Oyafuso, F.; Salazar-Lazaro, C.; Stoica, A.; Cwik, T.

1998-01-01

Material variations on an atomic scale enable the quantum mechanical functionality of devices such as resonant tunneling diodes (RTDs), quantum well infrared photodetectors (QWIPs), quantum well lasers, and heterostructure field effect transistors (HFETs).

LIVING SHORES GALLERY MX964015

EPA Science Inventory

An interactive computer kiosk will allow the Texas State Aquarium to deliver a considerable amount of information in an efficient and highly effective manner. Touch screen interactives have proven to be excellent teaching tools in the Aquarium's Jellies: Floating Phantoms galler...

Biomimetics: using nature as an inspiring model for human innovation

NASA Technical Reports Server (NTRS)

Bar-Cohen, Yoseph

2006-01-01

The evolution of nature over 3.8 billion years led to the highly effective and power efficient biological mechanisms. Imitating these mechanisms offers enormous potentials for the improvement of our life and the tools we use.

CMOST: an open-source framework for the microsimulation of colorectal cancer screening strategies.

PubMed

Prakash, Meher K; Lang, Brian; Heinrich, Henriette; Valli, Piero V; Bauerfeind, Peter; Sonnenberg, Amnon; Beerenwinkel, Niko; Misselwitz, Benjamin

2017-06-05

Colorectal cancer (CRC) is a leading cause of cancer-related mortality. CRC incidence and mortality can be reduced by several screening strategies, including colonoscopy, but randomized CRC prevention trials face significant obstacles such as the need for large study populations with long follow-up. Therefore, CRC screening strategies will likely be designed and optimized based on computer simulations. Several computational microsimulation tools have been reported for estimating efficiency and cost-effectiveness of CRC prevention. However, none of these tools is publicly available. There is a need for an open source framework to answer practical questions including testing of new screening interventions and adapting findings to local conditions. We developed and implemented a new microsimulation model, Colon Modeling Open Source Tool (CMOST), for modeling the natural history of CRC, simulating the effects of CRC screening interventions, and calculating the resulting costs. CMOST facilitates automated parameter calibration against epidemiological adenoma prevalence and CRC incidence data. Predictions of CMOST were highly similar compared to a large endoscopic CRC prevention study as well as predictions of existing microsimulation models. We applied CMOST to calculate the optimal timing of a screening colonoscopy. CRC incidence and mortality are reduced most efficiently by a colonoscopy between the ages of 56 and 59; while discounted life years gained (LYG) is maximal at 49-50 years. With a dwell time of 13 years, the most cost-effective screening is at 59 years, at $17,211 discounted USD per LYG. While cost-efficiency varied according to dwell time it did not influence the optimal time point of screening interventions within the tested range. Predictions of CMOST are highly similar compared to a randomized CRC prevention trial as well as those of other microsimulation tools. This open source tool will enable health-economics analyses in for various countries, health-care scenarios and CRC prevention strategies. CMOST is freely available under the GNU General Public License at https://gitlab.com/misselwb/CMOST.

High-Speed Scanning Interferometer Using CMOS Image Sensor and FPGA Based on Multifrequency Phase-Tracking Detection

NASA Technical Reports Server (NTRS)

Ohara, Tetsuo

2012-01-01

A sub-aperture stitching optical interferometer can provide a cost-effective solution for an in situ metrology tool for large optics; however, the currently available technologies are not suitable for high-speed and real-time continuous scan. NanoWave s SPPE (Scanning Probe Position Encoder) has been proven to exhibit excellent stability and sub-nanometer precision with a large dynamic range. This same technology can transform many optical interferometers into real-time subnanometer precision tools with only minor modification. The proposed field-programmable gate array (FPGA) signal processing concept, coupled with a new-generation, high-speed, mega-pixel CMOS (complementary metal-oxide semiconductor) image sensor, enables high speed (>1 m/s) and real-time continuous surface profiling that is insensitive to variation of pixel sensitivity and/or optical transmission/reflection. This is especially useful for large optics surface profiling.

Improving productivity and profitability of a bioanalytical business through sales and operation planning.

PubMed

Islam, Rafiqul

2013-07-01

Today's bioanalytical CROs face increasing global competition, highly variable demand, high fixed costs, pricing pressure, and increasing demand for quality and speed. Most bioanalytical laboratories have responded to these challenges by implementing automation and by implementing process improvement methodologies (e.g., Six Sigma). These solutions have not resulted in a significant improvement in productivity and profitability since none of them are able to predict the upturn or downturn in demand. High volatility of demand causes long lead times and high costs during peak demand and poor productivity during trough demand. Most bioanalytical laboratories lack the tools to align supply efficiently to meet changing demand. In this paper, sales and operation planning (S&OP) has been investigated as a tool to balance supply and demand. The S&OP process, when executed effectively, can be the single greatest determinant of profitability for a bioanalytical business.

Nucleic acid tool enzymes-aided signal amplification strategy for biochemical analysis: status and challenges.

PubMed

Qing, Taiping; He, Dinggeng; He, Xiaoxiao; Wang, Kemin; Xu, Fengzhou; Wen, Li; Shangguan, Jingfang; Mao, Zhengui; Lei, Yanli

2016-04-01

Owing to their highly efficient catalytic effects and substrate specificity, the nucleic acid tool enzymes are applied as 'nano-tools' for manipulating different nucleic acid substrates both in the test-tube and in living organisms. In addition to the function as molecular scissors and molecular glue in genetic engineering, the application of nucleic acid tool enzymes in biochemical analysis has also been extensively developed in the past few decades. Used as amplifying labels for biorecognition events, the nucleic acid tool enzymes are mainly applied in nucleic acids amplification sensing, as well as the amplification sensing of biorelated variations of nucleic acids. With the introduction of aptamers, which can bind different target molecules, the nucleic acid tool enzymes-aided signal amplification strategies can also be used to sense non-nucleic targets (e.g., ions, small molecules, proteins, and cells). This review describes and discusses the amplification strategies of nucleic acid tool enzymes-aided biosensors for biochemical analysis applications. Various analytes, including nucleic acids, ions, small molecules, proteins, and cells, are reviewed briefly. This work also addresses the future trends and outlooks for signal amplification in nucleic acid tool enzymes-aided biosensors.

A CFD/CSD Interaction Methodology for Aircraft Wings

NASA Technical Reports Server (NTRS)

Bhardwaj, Manoj K.

1997-01-01

With advanced subsonic transports and military aircraft operating in the transonic regime, it is becoming important to determine the effects of the coupling between aerodynamic loads and elastic forces. Since aeroelastic effects can contribute significantly to the design of these aircraft, there is a strong need in the aerospace industry to predict these aero-structure interactions computationally. To perform static aeroelastic analysis in the transonic regime, high fidelity computational fluid dynamics (CFD) analysis tools must be used in conjunction with high fidelity computational structural fluid dynamics (CSD) analysis tools due to the nonlinear behavior of the aerodynamics in the transonic regime. There is also a need to be able to use a wide variety of CFD and CSD tools to predict these aeroelastic effects in the transonic regime. Because source codes are not always available, it is necessary to couple the CFD and CSD codes without alteration of the source codes. In this study, an aeroelastic coupling procedure is developed which will perform static aeroelastic analysis using any CFD and CSD code with little code integration. The aeroelastic coupling procedure is demonstrated on an F/A-18 Stabilator using NASTD (an in-house McDonnell Douglas CFD code) and NASTRAN. In addition, the Aeroelastic Research Wing (ARW-2) is used for demonstration of the aeroelastic coupling procedure by using ENSAERO (NASA Ames Research Center CFD code) and a finite element wing-box code (developed as part of this research).

The human factor: the critical importance of effective teamwork and communication in providing safe care.

PubMed

Leonard, M; Graham, S; Bonacum, D

2004-10-01

Effective communication and teamwork is essential for the delivery of high quality, safe patient care. Communication failures are an extremely common cause of inadvertent patient harm. The complexity of medical care, coupled with the inherent limitations of human performance, make it critically important that clinicians have standardised communication tools, create an environment in which individuals can speak up and express concerns, and share common "critical language" to alert team members to unsafe situations. All too frequently, effective communication is situation or personality dependent. Other high reliability domains, such as commercial aviation, have shown that the adoption of standardised tools and behaviours is a very effective strategy in enhancing teamwork and reducing risk. We describe our ongoing patient safety implementation using this approach within Kaiser Permanente, a non-profit American healthcare system providing care for 8.3 million patients. We describe specific clinical experience in the application of surgical briefings, properties of high reliability perinatal care, the value of critical event training and simulation, and benefits of a standardised communication process in the care of patients transferred from hospitals to skilled nursing facilities. Additionally, lessons learned as to effective techniques in achieving cultural change, evidence of improving the quality of the work environment, practice transfer strategies, critical success factors, and the evolving methods of demonstrating the benefit of such work are described.

A Scoring Tool to Identify East African HIV-1 Serodiscordant Partnerships with a High Likelihood of Pregnancy.

PubMed

Heffron, Renee; Cohen, Craig R; Ngure, Kenneth; Bukusi, Elizabeth; Were, Edwin; Kiarie, James; Mugo, Nelly; Celum, Connie; Baeten, Jared M

2015-01-01

HIV-1 prevention programs targeting HIV-1 serodiscordant couples need to identify couples that are likely to become pregnant to facilitate discussions about methods to minimize HIV-1 risk during pregnancy attempts (i.e. safer conception) or effective contraception when pregnancy is unintended. A clinical prediction tool could be used to identify HIV-1 serodiscordant couples with a high likelihood of pregnancy within one year. Using standardized clinical prediction methods, we developed and validated a tool to identify heterosexual East African HIV-1 serodiscordant couples with an increased likelihood of becoming pregnant in the next year. Datasets were from three prospectively followed cohorts, including nearly 7,000 couples from Kenya and Uganda participating in HIV-1 prevention trials and delivery projects. The final score encompassed the age of the woman, woman's number of children living, partnership duration, having had condomless sex in the past month, and non-use of an effective contraceptive. The area under the curve (AUC) for the probability of the score to correctly predict pregnancy was 0.74 (95% CI 0.72-0.76). Scores ≥ 7 predicted a pregnancy incidence of >17% per year and captured 78% of the pregnancies. Internal and external validation confirmed the predictive ability of the score. A pregnancy likelihood score encompassing basic demographic, clinical and behavioral factors defined African HIV-1 serodiscordant couples with high one-year pregnancy incidence rates. This tool could be used to engage African HIV-1 serodiscordant couples in counseling discussions about fertility intentions in order to offer services for safer conception or contraception that align with their reproductive goals.

Identifying hotspots of coastal risk and evaluating DRR measures: results from the RISC-KIT project.

NASA Astrophysics Data System (ADS)

Van Dongeren, A.; Ciavola, P.; Viavattene, C.; Dekleermaeker, S.; Martinez, G.; Ferreira, O.; Costa, C.

2016-02-01

High-impact storm events have demonstrated the vulnerability of coastal zones in Europe and beyond. These impacts are likely to increase due to predicted climate change and ongoing coastal development. In order to reduce impacts, disaster risk reduction (DRR) measures need to be taken, which prevent or mitigate the effects of storm events. To drive the DRR agenda, the UNISDR formulated the Sendai Framework for Action, and the EU has issued the Floods Directive. However, neither is specific about the methods to be used to develop actionable DRR measures in the coastal zone. Therefore, there is a need to develop methods, tools and approaches which make it possible to: identify and prioritize the coastal zones which are most at risk through a Coastal Risk Assessment Framework, evaluate the effectiveness of DRR options for these coastal areas, using an Early Warning/Decision Support System, which can be used both in the planning and event-phase. This paper gives an overview of the products and results obtained in the FP7-funded project RISC-KIT, which aims to develop and apply a set of tools with which highly-vulnerable coastal areas (so-called "hotspots") can be identified. The identification is done using the Coastal Risk Assessment Framework, or CRAF, which computes the intensity from multi-hazards, the exposure and the vulnerability, all components of risk, including network and cascading effects. Based on this analysis hot spots of risk which warrant coastal protection investments are selected. For these hotspot areas, high-resolution Early Warning and Decision Support Tools are developed with which it is possible to compute in detail the effectiveness of Disaster Risk Reduction measures in storm event scenarios, which helps decide which measures to implement in the planning phase. The same systems, but now driven with real time data, can also be used for early warning systems. All tools are tested on eleven case study areas, at least one on each EU Regional Sea, and one international case in Bangladesh. Promising DRR measures and experiences are collected in a web-based Management Guide, and information on storm impacts is stored in a Coastal Risk Database.

Laser Cladding of CPM Tool Steels on Hardened H13 Hot-Work Steel for Low-Cost High-Performance Automotive Tooling

NASA Astrophysics Data System (ADS)

Chen, J.; Xue, L.

2012-06-01

This paper summarizes our research on laser cladding of high-vanadium CPM® tool steels (3V, 9V, and 15V) onto the surfaces of low-cost hardened H13 hot-work tool steel to substantially enhance resistance against abrasive wear. The results provide great potential for fabricating high-performance automotive tooling (including molds and dies) at affordable cost. The microstructure and hardness development of the laser-clad tool steels so obtained are presented as well.

An Experiential Approach to Clinical Supervision Training: A Mixed Methods Evaluation of Effectiveness

ERIC Educational Resources Information Center

Fisher, Amy Killen; Simmons, Christopher; Allen, Susan C.

2016-01-01

This study evaluates an intensive experiential exercise designed to facilitate the provision of high-quality supervision in social work. Data from 46 BSW and MSW students suggest that the exercise can be an effective learning tool. Both quantitative and qualitative findings indicated that the students formed a supervisory working alliance; BSW…

Dimension scaling effects on the yield sensitivity of HEMT digital circuits

NASA Technical Reports Server (NTRS)

Sarker, Jogendra C.; Purviance, John E.

1992-01-01

In our previous works, using a graphical tool, yield factor histograms, we studied the yield sensitivity of High Electron Mobility Transistors (HEMT) and HEMT circuit performance with the variation of process parameters. This work studies the scaling effects of process parameters on yield sensitivity of HEMT digital circuits. The results from two HEMT circuits are presented.

EINVis: a visualization tool for analyzing and exploring genetic interactions in large-scale association studies.

PubMed

Wu, Yubao; Zhu, Xiaofeng; Chen, Jian; Zhang, Xiang

2013-11-01

Epistasis (gene-gene interaction) detection in large-scale genetic association studies has recently drawn extensive research interests as many complex traits are likely caused by the joint effect of multiple genetic factors. The large number of possible interactions poses both statistical and computational challenges. A variety of approaches have been developed to address the analytical challenges in epistatic interaction detection. These methods usually output the identified genetic interactions and store them in flat file formats. It is highly desirable to develop an effective visualization tool to further investigate the detected interactions and unravel hidden interaction patterns. We have developed EINVis, a novel visualization tool that is specifically designed to analyze and explore genetic interactions. EINVis displays interactions among genetic markers as a network. It utilizes a circular layout (specially, a tree ring view) to simultaneously visualize the hierarchical interactions between single nucleotide polymorphisms (SNPs), genes, and chromosomes, and the network structure formed by these interactions. Using EINVis, the user can distinguish marginal effects from interactions, track interactions involving more than two markers, visualize interactions at different levels, and detect proxy SNPs based on linkage disequilibrium. EINVis is an effective and user-friendly free visualization tool for analyzing and exploring genetic interactions. It is publicly available with detailed documentation and online tutorial on the web at http://filer.case.edu/yxw407/einvis/. © 2013 WILEY PERIODICALS, INC.

Tribological investigations of the applicability of surface functionalization for dry extrusion processes

NASA Astrophysics Data System (ADS)

Teller, Marco; Prünte, Stephan; Ross, Ingo; Temmler, André; Schneider, Jochen M.; Hirt, Gerhard

2017-10-01

Cold extrusion processes are characterized by large relative contact stresses combined with a severe surface enlargement of the workpiece. Under these process conditions a high risk for galling of workpiece material to the tool steel occurs especially in processing of aluminum and aluminum alloys. In order to reduce adhesive wear lubricants for separation of workpiece and tool surfaces are used. As a consequence additional process steps (e.g. preparation and cleaning of workpieces) are necessary. Thus, the realization of a dry forming process is aspired from an environmental and economic perspective. In this paper a surface functionalization with self-assembled-monolayers (SAM) of the tool steels AISI D2 (DIN 1.2379) and AISI H11 (DIN 1.2343) is evaluated by a process-oriented tribological test. The tribological experiment is able to resemble and scale the process conditions of cold extrusion related to relative contact stress and surface enlargement for the forming of pure aluminum (Al99.5). The effect of reduced relative contact stress, surface enlargement and relative velocity on adhesive wear and tool lifetime is evaluated. Similar process conditions are achievable by different die designs with decreased extrusion ratios and adjusted die angles. The effect of surface functionalization critically depends on the substrate material. The different microstructure and the resulting differences in surface chemistry of the two tested tool steels appear to affect the performance of the tool surface functionalization with SAM.

Thrombocalc: implementation and uptake of personalized postpartum venous thromboembolism risk assessment in a high-throughput obstetric environment.

PubMed

O'Shaughnessy, Fergal; Donnelly, Jennifer C; Cooley, Sharon M; Deering, Mary; Raman, Ajita; Gannon, Geraldine; Hickey, Jane; Holland, Alan; Hayes, Niamh; Bennett, Kathleen; Ní Áinle, Fionnuala; Cleary, Brian J

2017-11-01

Venous thromboembolism risk assessment (VTERA) is recommended in all pregnant and postpartum women. Our objective was to develop, pilot and implement a user-friendly electronic VTERA tool. We developed "Thrombocalc", an electronic VTERA tool using Microsoft EXCEL ™ . Thrombocalc was designed as a score-based tool to facilitate rapid assessment of all women after childbirth. Calculation of a total score estimated risk of venous thromboembolism in line with consensus guidelines. Recommendations for thromboprophylaxis were included in the VTERA output. Implementation was phased. Uptake of the VTERA tool was assessed prospectively by monitoring the proportion of women who gave birth in our institution and had a completed risk assessment. Factors affecting completion and accuracy of risk assessments were also assessed. Thrombocalc was used prospectively to risk-assess 8380 women between September 2014 and December 2015. Compliance with this tool increased dramatically throughout the study period; over 92% of women were risk-assessed in the last quarter of data collection. Compliance was not adversely affected if delivery took place out of working hours [adjusted odds ratio (aOR) 1.03, 95% confidence interval (CI) 0.93-1.14]. Risk assessment was less likely in the case of cesarean deliveries (aOR 0.66, 95% CI 0.60-0.73) and stillborn infants (aOR 0.48, 95% CI 0.29-0.79). Misclassification of risk factors led to approximately 207 (2.5%) inaccurate thromboprophylaxis recommendations. Our electronic, score-based VTERA tool provides a highly effective mechanism for rapid assessment of individual postpartum venous thromboembolism risk in a high-throughput environment. © 2017 Nordic Federation of Societies of Obstetrics and Gynecology.

On the benefit of high resolution and low aberrations for in-die mask registration metrology

NASA Astrophysics Data System (ADS)

Beyer, Dirk; Seidel, Dirk; Heisig, Sven; Steinert, Steffen; Töpfer, Susanne; Scherübl, Thomas; Hetzler, Jochen

2014-10-01

With the introduction of complex lithography schemes like double and multi - patterning and new design principles like gridded designs with cut masks the requirements for mask to mask overlay have increased dramatically. Still, there are some good news too for the mask industry since more mask are needed and qualified. Although always confronted with throughput demands, latest writing tool developments are able to keep pace with ever increasing pattern placement specs not only for global signatures but for in-die features within the active area. Placement specs less than 3nm (max. 3 Sigma) are expected and needed in all cases in order to keep the mask contribution to the overall overlay budget at an accepted level. The qualification of these masks relies on high precision metrology tools which have to fulfill stringent metrology as well as resolution constrains at the same time. Furthermore, multi-patterning and gridded designs with pinhole type cut masks are drivers for a paradigm shift in registration metrology from classical registration crosses to in-die registration metrology on production features. These requirements result in several challenges for registration metrology tools. The resolution of the system must be sufficiently high to resolve small production features. At the same time tighter repeatability is required. Furthermore, tool induced shift (TIS) limit the accuracy of in-die measurements. This paper discusses and demonstrates the importance of low illumination wavelength together with low aberrations for best contrast imaging for in-die registration metrology. Typical effects like tool induced shift are analyzed and evaluated using the ZEISS PROVE® registration metrology tool. Additionally, we will address performance gains when going to higher resolution. The direct impact on repeatability for small features by registration measurements will be discussed as well.

Applying a statewide geospatial leaching tool for assessing soil vulnerability ratings for agrochemicals across the contiguous United States.

PubMed

Ki, Seo Jin; Ray, Chittaranjan; Hantush, Mohamed M

2015-06-15

A large-scale leaching assessment tool not only illustrates soil (or groundwater) vulnerability in unmonitored areas, but also can identify areas of potential concern for agrochemical contamination. This study describes the methodology of how the statewide leaching tool in Hawaii modified recently for use with pesticides and volatile organic compounds can be extended to the national assessment of soil vulnerability ratings. For this study, the tool was updated by extending the soil and recharge maps to cover the lower 48 states in the United States (US). In addition, digital maps of annual pesticide use (at a national scale) as well as detailed soil properties and monthly recharge rates (at high spatial and temporal resolutions) were used to examine variations in the leaching (loads) of pesticides for the upper soil horizons. Results showed that the extended tool successfully delineated areas of high to low vulnerability to selected pesticides. The leaching potential was high for picloram, medium for simazine, and low to negligible for 2,4-D and glyphosate. The mass loadings of picloram moving below 0.5 m depth increased greatly in northwestern and central US that recorded its extensive use in agricultural crops. However, in addition to the amount of pesticide used, annual leaching load of atrazine was also affected by other factors that determined the intrinsic aquifer vulnerability such as soil and recharge properties. Spatial and temporal resolutions of digital maps had a great effect on the leaching potential of pesticides, requiring a trade-off between data availability and accuracy. Potential applications of this tool include the rapid, large-scale vulnerability assessments for emerging contaminants which are hard to quantify directly through vadose zone models due to lack of full environmental data. Copyright © 2015 Elsevier Ltd. All rights reserved.

The AALAS Learning Library and its effectiveness as a tool for technician training.

PubMed

Parker-Thornburg, Jan; Grabeel, Pam; Butler, Mark

2009-06-01

Computer-based training is potentially a useful means of gaining proficiency in various aspects of laboratory animal science. The authors present an overview of the AALAS Learning Library (ALL), an internet-based training system that was established in 2003 and is widely used for technician certification training and for IACUC-mandated training. To evaluate the effectiveness of the ALL as a tool for general training and for achieving certification, the AALAS Online Learning Committee initiated a review of the online courses. The authors analyzed the numbers of users who accessed different types of courses and completed exams in those courses. They also correlated ALL usage with pass rates in technician certification exams. Results suggest that the ALL is a highly effective method of training, particularly for technician certification.

Pathogenesis of cerebral malaria: new diagnostic tools, biomarkers, and therapeutic approaches

PubMed Central

Sahu, Praveen K.; Satpathi, Sanghamitra; Behera, Prativa K.; Mishra, Saroj K.; Mohanty, Sanjib; Wassmer, Samuel Crocodile

2015-01-01

Cerebral malaria is a severe neuropathological complication of Plasmodium falciparum infection. It results in high mortality and post-recovery neuro-cognitive disorders in children, even after appropriate treatment with effective anti-parasitic drugs. While the complete landscape of the pathogenesis of cerebral malaria still remains to be elucidated, numerous innovative approaches have been developed in recent years in order to improve the early detection of this neurological syndrome and, subsequently, the clinical care of affected patients. In this review, we briefly summarize the current understanding of cerebral malaria pathogenesis, compile the array of new biomarkers and tools available for diagnosis and research, and describe the emerging therapeutic approaches to tackle this pathology effectively. PMID:26579500

Computer assisted surgery with 3D robot models and visualisation of the telesurgical action.

PubMed

Rovetta, A

2000-01-01

This paper deals with the support of virtual reality computer action in the procedures of surgical robotics. Computer support gives a direct representation of the surgical theatre. The modelization of the procedure in course and in development gives a psychological reaction towards safety and reliability. Robots similar to the ones used by the manufacturing industry can be used with little modification as very effective surgical tools. They have high precision, repeatability and are versatile in integrating with the medical instrumentation. Now integrated surgical rooms, with computer and robot-assisted intervention, are operating. The computer is the element for a decision taking aid, and the robot works as a very effective tool.

How much is tuberculosis screening worth? Estimating the value of active case finding for tuberculosis in South Africa, China, and India.

PubMed

Azman, Andrew S; Golub, Jonathan E; Dowdy, David W

2014-10-30

Current approaches are unlikely to achieve the aggressive global tuberculosis (TB) control targets set for 2035 and beyond. Active case finding (ACF) may be an important tool for augmenting existing strategies, but the cost-effectiveness of ACF remains uncertain. Program evaluators can often measure the cost of ACF per TB case detected, but how this accessible measure translates into traditional metrics of cost-effectiveness, such as the cost per disability-adjusted life year (DALY), remains unclear. We constructed dynamic models of TB in India, China, and South Africa to explore the medium-term impact and cost-effectiveness of generic ACF activities, conceptualized separately as discrete (2-year) campaigns and as continuous activities integrated into ongoing TB control programs. Our primary outcome was the cost per DALY, measured in relationship to the cost per TB case actively detected and started on treatment. Discrete campaigns costing up to $1,200 (95% uncertainty range [UR] 850-2,043) per case actively detected and started on treatment in India, $3,800 (95% UR 2,706-6,392) in China, and $9,400 (95% UR 6,957-13,221) in South Africa were all highly cost-effective (cost per DALY averted less than per capita gross domestic product). Prolonged integration was even more effective and cost-effective. Short-term assessments of ACF dramatically underestimated potential longer term gains; for example, an assessment of an ACF program at 2 years might find a non-significant 11% reduction in prevalence, but a 10-year evaluation of that same intervention would show a 33% reduction. ACF can be a powerful and highly cost-effective tool in the fight against TB. Given that short-term assessments may dramatically underestimate medium-term effectiveness, current willingness to pay may be too low. ACF should receive strong consideration as a basic tool for TB control in most high-burden settings, even when it may cost over $1,000 to detect and initiate treatment for each extra case of active TB.

On line biomonitors used as a tool for toxicity reduction evaluation of in situ groundwater remediation techniques.

PubMed

Küster, Eberhard; Dorusch, Falk; Vogt, Carsten; Weiss, Holger; Altenburger, Rolf

2004-07-15

Success of groundwater remediation is typically controlled via snapshot analysis of selected chemical substances or physical parameters. Biological parameters, i.e. ecotoxicological assays, are rarely employed. Hence the aim of the study was to develop a bioassay tool, which allows an on line monitoring of contaminated groundwater, as well as a toxicity reduction evaluation (TRE) of different remediation techniques in parallel and may furthermore be used as an additional tool for process control to supervise remediation techniques in a real time mode. Parallel testing of groundwater remediation techniques was accomplished for short and long time periods, by using the energy dependent luminescence of the bacterium Vibrio fischeri as biological monitoring parameter. One data point every hour for each remediation technique was generated by an automated biomonitor. The bacteria proved to be highly sensitive to the contaminated groundwater and the biomonitor showed a long standing time despite the highly corrosive groundwater present in Bitterfeld, Germany. The bacterial biomonitor is demonstrated to be a valuable tool for remediation success evaluation. Dose response relationships were generated for the six quantitatively dominant groundwater contaminants (2-chlortoluene, 1,2- and 1,4-dichlorobenzene, monochlorobenzene, ethylenbenzene and benzene). The concentrations of individual volatile organic chemicals (VOCs) could not explain the observed effects in the bacteria. An expected mixture toxicity was calculated for the six components using the concept of concentration addition. The calculated EC(50) for the mixture was still one order of magnitude lower than the observed EC(50) of the actual groundwater. The results pointed out that chemical analysis of the six most quantitative substances alone was not able to explain the effects observed with the bacteria. Thus chemical analysis alone may not be an adequate tool for remediation success evaluation in terms of toxicity reduction.

Seismic tomography as a tool for measuring stress in mines

USGS Publications Warehouse

Scott, Douglas F.; Williams, T.J.; Denton, D.K.; Friedel, M.J.

1999-01-01

Spokane Research Center personnel have been investigating the use of seismic tomography to monitor the behavior of a rock mass, detect hazardous ground conditions and assess the mechanical integrity of a rock mass affected by mining. Seismic tomography can be a valuable tool for determining relative stress in deep, >1,220-m (>4,000-ft), underground pillars. If high-stress areas are detected, they can be destressed prior to development or they can be avoided. High-stress areas can be monitored with successive seismic surveys to determine if stress decreases to a level where development can be initiated safely. There are several benefits to using seismic tomography to identify high stress in deep underground pillars. The technique is reliable, cost-effective, efficient and noninvasive. Also, investigators can monitor large rock masses, as well as monitor pillars during the mining cycle. By identifying areas of high stress, engineers will be able to assure that miners are working in a safer environment.Spokane Research Center personnel have been investigating the use of seismic tomography to monitor the behavior of a rock mass, detect hazardous ground conditions and assess the mechanical integrity of a rock mass affected by mining. Seismic tomography can be a valuable tool for determining relative stress in deep, >1,200-m (>4,000-ft), underground pillars. If high-stress areas are detected, they can be destressed prior to development or they can be avoided. High-stress areas can be monitored with successive seismic surveys to determine if stress decreases to a level where development can be initiated safely. There are several benefits to using seismic tomography to identify high stress in deep underground pillars. The technique is reliable, cost-effective, efficient and noninvasive. Also, investigators can monitor large rock masses, as well as monitor pillars during the mining cycle. By identifying areas of high stress. engineers will be able to assure that miners are working in a safer environment.

Development of probabilistic thinking-oriented learning tools for probability materials at junior high school students

NASA Astrophysics Data System (ADS)

Sari, Dwi Ivayana; Hermanto, Didik

2017-08-01

This research is a developmental research of probabilistic thinking-oriented learning tools for probability materials at ninth grade students. This study is aimed to produce a good probabilistic thinking-oriented learning tools. The subjects were IX-A students of MTs Model Bangkalan. The stages of this development research used 4-D development model which has been modified into define, design and develop. Teaching learning tools consist of lesson plan, students' worksheet, learning teaching media and students' achievement test. The research instrument used was a sheet of learning tools validation, a sheet of teachers' activities, a sheet of students' activities, students' response questionnaire and students' achievement test. The result of those instruments were analyzed descriptively to answer research objectives. The result was teaching learning tools in which oriented to probabilistic thinking of probability at ninth grade students which has been valid. Since teaching and learning tools have been revised based on validation, and after experiment in class produced that teachers' ability in managing class was effective, students' activities were good, students' responses to the learning tools were positive and the validity, sensitivity and reliability category toward achievement test. In summary, this teaching learning tools can be used by teacher to teach probability for develop students' probabilistic thinking.

Literacy assessment of family health history tools for public health prevention.

PubMed

Wang, C; Gallo, R E; Fleisher, L; Miller, S M

2011-01-01

This study aimed to systematically identify and evaluate the readability and document complexity of currently available family history tools for the general public. Three steps were undertaken to identify family history tools for evaluation: (a) Internet searches, (b) expert consultation, and (c) literature searches. Tools identified were assessed for readability using the Simple Measure of Gobbledygook (SMOG) readability formula. The complexity of documents (i.e., forms collecting family history information) was assessed using the PMOSE/IKIRSCH document readability formula. A total of 78 tools were identified, 47 of which met the criteria for inclusion. SMOG reading grade levels for multimedia-based tools ranged from 10.1 to 18.3, with an average score of 13.6. For print-based tools, SMOG ranged from 8.7 to 14.1, with an average score of 12.0. Document complexity ranged from very low complexity (level 1 proficiency) to high complexity (level 4 proficiency). The majority of tools are written at a reading grade level that is beyond the 8th grade average reading level in the United States. The lack of family history tools that are easy to read or use may compromise their potential effectiveness in identifying individuals at increased risk for chronic diseases in the general population. Copyright © 2010 S. Karger AG, Basel.

LEGO robot vehicle lesson plans for secondary education : a recruitment tool.

DOT National Transportation Integrated Search

2012-08-01

Robotics is a great way to get kids excited about science, technology, engineering, and math (STEM) topics. It is also highly effective in stimulation development of teamwork and self-confidence. This project provides transportation-related lesson pl...

Blogging about Summer Reading: The Learning and Engagement of High School Students Using Interactive Technology

ERIC Educational Resources Information Center

Place, Janice Becker

2012-01-01

The purpose of this study was to investigate what happened when grade 11 high school honors students blogged about their summer reading under the monitoring of a teacher during vacation. I proposed that an educational blog might serve as an effective tool during summer vacation to help students retain skills or learning while at a physical…

Voice over Internet Protocol (VoIP) Technology as a Global Learning Tool: Information Systems Success and Control Belief Perspectives

ERIC Educational Resources Information Center

Chen, Charlie C.; Vannoy, Sandra

2013-01-01

Voice over Internet Protocol- (VoIP) enabled online learning service providers struggling with high attrition rates and low customer loyalty issues despite VoIP's high degree of system fit for online global learning applications. Effective solutions to this prevalent problem rely on the understanding of system quality, information quality, and…

Analysis of the Effectiveness of the Retire Tool When Deciding Between High 36 Retirement and Blended TSP Retirement

DTIC Science & Technology

2016-12-01

based on life expectancy and the TSP account selected. The TSP Growth and Annuity Element also estimates how taxes will increase at the time the service...the BRS. 14. SUBJECT TERMS military retirement, blended retirement, HIGH-36, thrift savings plan, investment risk, retirement taxes , net present...20 2. Tax Impacts

Systems Thinking Tools for Improving Evidence-Based Practice: A Cross-Case Analysis of Two High School Leadership Teams

ERIC Educational Resources Information Center

Kensler, Lisa A. W.; Reames, Ellen; Murray, John; Patrick, Lynne

2012-01-01

Teachers and administrators have access to large volumes of data but research suggests that they lack the skills to use data effectively for continuous school improvement. This study involved a cross-case analysis of two high school leadership teams' early stages of evidence-based practice development; differing forms of external support were…

The Downside of Early Decision: Choosing Early Doesn't Always Mean Choosing Right

ERIC Educational Resources Information Center

Bacow, Lawrence S.

2006-01-01

The increasingly popular option of applying "early decision" (ED) requires a student to make a binding commitment that, if admitted to a particular college, she or he will enroll. Now offered by 184 U.S. colleges and universities, ED is a highly effective--and therefore highly seductive--tool for managing enrollment. This author argues,…

Methods and tools to simulate the effect of economic instruments in complex water resources systems. Application to the Jucar river basin.

NASA Astrophysics Data System (ADS)

Lopez-Nicolas, Antonio; Pulido-Velazquez, Manuel

2014-05-01

The main challenge of the BLUEPRINT to safeguard Europe's water resources (EC, 2012) is to guarantee that enough good quality water is available for people's needs, the economy and the environment. In this sense, economic policy instruments such as water pricing policies and water markets can be applied to enhance efficient use of water. This paper presents a method based on hydro-economic tools to assess the effect of economic instruments on water resource systems. Hydro-economic models allow integrated analysis of water supply, demand and infrastructure operation at the river basin scale, by simultaneously combining engineering, hydrologic and economic aspects of water resources management. The method made use of the simulation and optimization hydroeconomic tools SIMGAMS and OPTIGAMS. The simulation tool SIMGAMS allocates water resources among the users according to priorities and operating rules, and evaluate economic scarcity costs of the system by using economic demand functions. The model's objective function is designed so that the system aims to meet the operational targets (ranked according to priorities) at each month while following the system operating rules. The optimization tool OPTIGAMS allocates water resources based on an economic efficiency criterion: maximize net benefits, or alternatively, minimizing the total water scarcity and operating cost of water use. SIMGAS allows to simulate incentive water pricing policies based on marginal resource opportunity costs (MROC; Pulido-Velazquez et al., 2013). Storage-dependent step pricing functions are derived from the time series of MROC values at a certain reservoir in the system. These water pricing policies are defined based on water availability in the system (scarcity pricing), so that when water storage is high, the MROC is low, while low storage (drought periods) will be associated to high MROC and therefore, high prices. We also illustrate the use of OPTIGAMS to simulate the effect of ideal water markets by economic optimization, without considering the potential effect of transaction costs. These methods and tools have been applied to the Jucar River basin (Spain). The results show the potential of economic instruments in setting incentives for a more efficient management of water resources systems. Acknowledgments: The study has been partially supported by the European Community 7th Framework Project (GENESIS project, n. 226536), SAWARES (Plan Nacional I+D+i 2008-2011, CGL2009-13238-C02-01 and C02-02), SCARCE (Consolider-Ingenio 2010 CSD2009-00065) of the Spanish Ministry of Economy and Competitiveness; and EC 7th Framework Project ENHANCE (n. 308438) Reference: Pulido-Velazquez, M., Alvarez-Mendiola, E., and Andreu, J., 2013. Design of Efficient Water Pricing Policies Integrating Basinwide Resource Opportunity Costs. J. Water Resour. Plann. Manage., 139(5): 583-592.

Design of a high pulse repitition frequency carbon dioxide laser for processing high damage threshold materials

NASA Astrophysics Data System (ADS)

Chatwin, Christopher R.; McDonald, Donald W.; Scott, Brian F.

1989-07-01

The absence of an applications led design philosophy has compromised both the development of laser source technology and its effective implementation into manufacturing technology in particular. For example, CO2 lasers are still incapable of processing classes of refractory and non-ferrous metals. Whilst the scope of this paper is restricted to high power CO2 lasers; the design methodology reported herein is applicable to source technology in general, which when exploited, will effect an expansion of applications. The CO2 laser operational envelope should not only be expanded to incorporate high damage threshold materials but also offer a greater degree of controllability. By a combination of modelling and experimentation the requisite beam characteristics, at the workpiece, were determined then utilised to design the Laser Manufacturing System. The design of sub-system elements was achieved by a combination of experimentation and simulation which benefited from a comprehensive set of software tools. By linking these tools the physical processes in the laser - electron processes in the plasma, the history of photons in the resonator, etc. - can be related, in a detailed model, to the heating mechanisms in the workpiece.

Microstructural investigation of D2 tool steel during rapid solidification

NASA Astrophysics Data System (ADS)

Delshad Khatibi, Pooya

Solidification is considered as a key processing step in developing the microstructure of most metallic materials. It is, therefore, important that the solidification process can be designed and controlled in such a way so as to obtain the desirable properties in the final product. Rapid solidification refers to the system's high undercooling and high cooling rate, which can yield a microstructure with unique chemical composition and mechanical properties. An area of interest in rapid solidification application is high-chromium, high-carbon tool steels which experience considerable segregation of alloying elements during their solidification in a casting process. In this dissertation, the effect of rapid solidification (undercooling and cooling rate) of D2 tool steel on the microstructure and carbide precipitation during annealing was explored. A methodology is described to estimate the eutectic and primary phase undercooling of solidifying droplets. The estimate of primary phase undercooling was confirmed using an online measurement device that measured the radiation energy of the droplets. The results showed that with increasing primary phase and eutectic undercooling and higher cooling rate, the amount of supersaturation of alloying element in metastable retained austenite phase also increases. In the case of powders, the optimum hardness after heat treatment is achieved at different temperatures for constant periods of time. Higher supersaturation of austenite results in obtaining secondary hardness at higher annealing temperature. D2 steel ingots generated using spray deposition have high eutectic undercooling and, as a result, high supersaturation of alloying elements. This can yield near net shape D2 tool steel components with good mechanical properties (specifically hardness). The data developed in this work would assist in better understanding and development of near net shape D2 steel spray deposit products with good mechanical properties.

Application of HFCT and UHF Sensors in On-Line Partial Discharge Measurements for Insulation Diagnosis of High Voltage Equipment

PubMed Central

Álvarez, Fernando; Garnacho, Fernando; Ortego, Javier; Sánchez-Urán, Miguel Ángel

2015-01-01

Partial discharge (PD) measurements provide valuable information for assessing the condition of high voltage (HV) insulation systems, contributing to their quality assurance. Different PD measuring techniques have been developed in the last years specially designed to perform on-line measurements. Non-conventional PD methods operating in high frequency bands are usually used when this type of tests are carried out. In PD measurements the signal acquisition, the subsequent signal processing and the capability to obtain an accurate diagnosis are conditioned by the selection of a suitable detection technique and by the implementation of effective signal processing tools. This paper proposes an optimized electromagnetic detection method based on the combined use of wideband PD sensors for measurements performed in the HF and UHF frequency ranges, together with the implementation of powerful processing tools. The effectiveness of the measuring techniques proposed is demonstrated through an example, where several PD sources are measured simultaneously in a HV installation consisting of a cable system connected by a plug-in terminal to a gas insulated substation (GIS) compartment. PMID:25815452

Effects of pulse ON and OFF time and electrode types on the material removal rate and tool wear rate of the Ti-6Al-4V Alloy using EDM machining with reverse polarity

NASA Astrophysics Data System (ADS)

Praveen, L.; Geeta Krishna, P.; Venugopal, L.; Prasad, N. E. C.

2018-03-01

Electrical Discharge Machining (EDM) is an unconventional metal removal process that is extensively used for removing the difficult-to-machine metal such as Ti alloys, super alloys and metal matrix composites. This paper investigates the effects of pulse (ON/OFF) time on EDM machining characteristics of Ti-6Al-4V alloy using copper and graphite as electrodes in reverse polarity condition. Full factorial design method was used to design the experiments. Two variables (Pulse On and OFF) with three levels are considered. The output variables are the tool wear rate and the material removal rate. The important findings from the present work are: (1) the material removal rate (MRR) increases gradually with an increase of the Pulse ON time whereas the change is insignificant with an increase of the Pulse OFF time, (2) Between copper and graphite electrodes, the copper electrode is proved to be good in terms of MRR, (3) a combination of high pulse ON time and OFF time is desirable for high MRR rate in the Cu electrode whereas for the graphite electrode, a combination of high pulse ON time and low pulse OFF time is desirable for high MRR rate, (4) the tool wear rate (TWR) reduces with the Pulse On or OFF time, the rate of TWR is uniform for the graphite electrode in contrast to abrupt decrease from 25 to 50 μs (pulse ON time) in the copper electrode, (5) In order to keep the TWR as minimum possible, it is desirable to have a combination of high pulse ON time and OFF time for both the copper and the graphite electrode.

Comprehensive surface treatment of high-speed steel tool

NASA Astrophysics Data System (ADS)

Fedorov, Sergey V.; Aleshin, Sergey V.; Swe, Min Htet; Abdirova, Raushan D.; Kapitanov, Alexey V.; Egorov, Sergey B.

2018-03-01

One of the promising directions of hardening of high-speed steel tool is the creation on their surface of the layered structures with the gradient of physic-chemical properties between the wear-resistant coatings to the base material. Among the methods of such surface modification, a special process takes place based on the use of pulsed high-intensity charged particle beams. The high speed of heating and cooling allows structural-phase transformations in the surface layer, which cannot be realized in a stationary mode. The treatment was conducted in a RITM-SP unit, which constitutes a combination of a source of low-energy high-current electron beams "RITM" and two magnetron spraying systems on a single vacuum chamber. The unit enables deposition of films on the surface of the desired product and subsequent liquid-phase mixing of materials of the film and the substrate by an intense pulse electron beam. The article discusses features of the structure of the subsurface layer of high-speed steel M2, modified by surface alloying of a low-energy high-current electron beam, and its effect on the wear resistance of the tool when dry cutting hard to machine Nickel alloy. A significant decrease of intensity of wear of high-speed steel with combined treatment happens due to the displacement of the zone of wear and decrease the radius of rounding of the cutting edge because of changes in conditions of interaction with the material being treated.

Simulator technology as a tool for education in cardiac care.

PubMed

Hravnak, Marilyn; Beach, Michael; Tuite, Patricia

2007-01-01

Assisting nurses in gaining the cognitive and psychomotor skills necessary to safely and effectively care for patients with cardiovascular disease can be challenging for educators. Ideally, nurses would have the opportunity to synthesize and practice these skills in a protected training environment before application in the dynamic clinical setting. Recently, a technology known as high fidelity human simulation was introduced, which permits learners to interact with a simulated patient. The dynamic physiologic parameters and physical assessment capabilities of the simulated patient provide for a realistic learning environment. This article describes the High Fidelity Human Simulation Laboratory at the University of Pittsburgh School of Nursing and presents strategies for using this technology as a tool in teaching complex cardiac nursing care at the basic and advanced practice nursing levels. The advantages and disadvantages of high fidelity human simulation in learning are discussed.

Satellite Contamination and Materials Outgassing Knowledge base

NASA Technical Reports Server (NTRS)

Minor, Jody L.; Kauffman, William J. (Technical Monitor)

2001-01-01

Satellite contamination continues to be a design problem that engineers must take into account when developing new satellites. To help with this issue, NASA's Space Environments and Effects (SEE) Program funded the development of the Satellite Contamination and Materials Outgassing Knowledge base. This engineering tool brings together in one location information about the outgassing properties of aerospace materials based upon ground-testing data, the effects of outgassing that has been observed during flight and measurements of the contamination environment by on-orbit instruments. The knowledge base contains information using the ASTM Standard E- 1559 and also consolidates data from missions using quartz-crystal microbalances (QCM's). The data contained in the knowledge base was shared with NASA by government agencies and industry in the US and international space agencies as well. The term 'knowledgebase' was used because so much information and capability was brought together in one comprehensive engineering design tool. It is the SEE Program's intent to continually add additional material contamination data as it becomes available - creating a dynamic tool whose value to the user is ever increasing. The SEE Program firmly believes that NASA, and ultimately the entire contamination user community, will greatly benefit from this new engineering tool and highly encourages the community to not only use the tool but add data to it as well.

Development of a Tool for Siting Low Impact Development in Urban Watersheds

NASA Astrophysics Data System (ADS)

Martin-Mikle, C.; de Beurs, K.; Julian, J.

2013-12-01

Low impact development (LID) -- a comprehensive land use planning and design approach with the goal of mitigating development impacts on hydrologic/nutrient cycles and ecosystems -- is increasingly being touted as an effective approach to lessen overland runoff and pollutant loadings. Examples of LIDs include riparian buffers, grassed swales, detention/retention ponds, rain gardens, green roofs and rain barrels. Broad-scale decision support tools for siting LIDs have been developed for agricultural watersheds, but are rare for urban watersheds, largely due to greater land use complexity and lack of necessary high-resolution geospatial data. Here, we develop a framework to assist city planners and water quality managers in siting LIDs in urban watersheds. One key component of this research is a framework accessible to those interested in using it. Hence, development of the framework has centered around 1) determining optimal data requirements for siting LID in an urban watershed and 2) developing a tool compatible with both open-source and commercial GIS software. We employ a wide variety of landscape metrics to evaluate the tool. A case study of the Lake Thunderbird Watershed, an urbanized watershed southeast of Oklahoma City, illustrates the effectiveness of a tool that is capable of siting LID in an urban watershed.

Near East/South Asia Report.

DTIC Science & Technology

1985-12-19

effective tools of monetary policy. Changing business opportunities in the Gulf and overseas have led to the creation of an increasingly sophisticated...return lawsuits involving interest. Modern technology and high-cost training have had their effect on the banks1 income. While these banks have been...good opportunities for Gulf banks to help medium-size companies in the region which are feeling the effects of the economic slow- down and which

Validation of a Low-Thrust Mission Design Tool Using Operational Navigation Software

NASA Technical Reports Server (NTRS)

Englander, Jacob A.; Knittel, Jeremy M.; Williams, Ken; Stanbridge, Dale; Ellison, Donald H.

2017-01-01

Design of flight trajectories for missions employing solar electric propulsion requires a suitably high-fidelity design tool. In this work, the Evolutionary Mission Trajectory Generator (EMTG) is presented as a medium-high fidelity design tool that is suitable for mission proposals. EMTG is validated against the high-heritage deep-space navigation tool MIRAGE, demonstrating both the accuracy of EMTG's model and an operational mission design and navigation procedure using both tools. The validation is performed using a benchmark mission to the Jupiter Trojans.

In-School Suspension: Pedagogy, Praxis, and Program Effectiveness at the Middle and High School Levels for At-Risk Students and Its Affects on Academic Achievement and Retention

ERIC Educational Resources Information Center

Shipman, Larry Douglas, Sr.

2013-01-01

Middle and high schools across America are striving to equip their students with the tools necessary for achieving their highest academic potential to become model citizens. The purpose of this qualitative case study was to examine the strategies and interventions available for middle and high school students referred to In-school suspension (ISS)…

Multiple testing corrections in quantitative proteomics: A useful but blunt tool.

PubMed

Pascovici, Dana; Handler, David C L; Wu, Jemma X; Haynes, Paul A

2016-09-01

Multiple testing corrections are a useful tool for restricting the FDR, but can be blunt in the context of low power, as we demonstrate by a series of simple simulations. Unfortunately, in proteomics experiments low power can be common, driven by proteomics-specific issues like small effects due to ratio compression, and few replicates due to reagent high cost, instrument time availability and other issues; in such situations, most multiple testing corrections methods, if used with conventional thresholds, will fail to detect any true positives even when many exist. In this low power, medium scale situation, other methods such as effect size considerations or peptide-level calculations may be a more effective option, even if they do not offer the same theoretical guarantee of a low FDR. Thus, we aim to highlight in this article that proteomics presents some specific challenges to the standard multiple testing corrections methods, which should be employed as a useful tool but not be regarded as a required rubber stamp. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Modeling NIF experimental designs with adaptive mesh refinement and Lagrangian hydrodynamics

NASA Astrophysics Data System (ADS)

Koniges, A. E.; Anderson, R. W.; Wang, P.; Gunney, B. T. N.; Becker, R.; Eder, D. C.; MacGowan, B. J.; Schneider, M. B.

2006-06-01

Incorporation of adaptive mesh refinement (AMR) into Lagrangian hydrodynamics algorithms allows for the creation of a highly powerful simulation tool effective for complex target designs with three-dimensional structure. We are developing an advanced modeling tool that includes AMR and traditional arbitrary Lagrangian-Eulerian (ALE) techniques. Our goal is the accurate prediction of vaporization, disintegration and fragmentation in National Ignition Facility (NIF) experimental target elements. Although our focus is on minimizing the generation of shrapnel in target designs and protecting the optics, the general techniques are applicable to modern advanced targets that include three-dimensional effects such as those associated with capsule fill tubes. Several essential computations in ordinary radiation hydrodynamics need to be redesigned in order to allow for AMR to work well with ALE, including algorithms associated with radiation transport. Additionally, for our goal of predicting fragmentation, we include elastic/plastic flow into our computations. We discuss the integration of these effects into a new ALE-AMR simulation code. Applications of this newly developed modeling tool as well as traditional ALE simulations in two and three dimensions are applied to NIF early-light target designs.

Using software to predict occupational hearing loss in the mining industry

PubMed Central

Azman, A.S.; Li, M.; Thompson, J.K.

2017-01-01

Powerful mining systems typically generate high-level noise that can damage the hearing ability of miners. Engineering noise controls are the most desirable and effective control for overexposure to noise. However, the effects of these noise controls on the actual hearing status of workers are not easily measured. A tool that can provide guidance in assigning workers to jobs based on the noise levels to which they will be exposed is highly desirable. Therefore, the Pittsburgh Mining Research Division (PMRD) of the U.S. National Institute for Occupational Safety and Health (NIOSH) developed a tool to estimate in a systematic way the hearing loss due to occupational noise exposure and to evaluate the effectiveness of developed engineering controls. This computer program is based on the ISO 1999 standard and can be used to estimate the loss of hearing ability caused by occupational noise exposures. In this paper, the functionalities of this software are discussed and several case studies related to mining machinery are presented to demonstrate the functionalities of this software. PMID:28596700

Tool feed influence on the machinability of CO(2) laser optics.

PubMed

Arnold, J B; Steger, P J; Saito, T T

1975-08-01

Influence of tool feed on reflectivity of diamond-machined surfaces was evaluated using materials (gold, silver, and copper) from which CO(2) laser optics are primarily produced. Fifteen specimens were machined by holding all machining parameters constant, except tool feed. Tool feed was allowed to vary by controlled amounts from one evaluation zone (or part) to another. Past experience has verified that the quality of a diamond-machined surface is not a function of the cutting velocity; therefore, this experiment was conducted on the basis that a variation in cutting velocity was not an influencing factor on the diamondturning process. Inspection results of the specimens indicated that tool feeds significantly higher than 5.1 micro/rev (200 microin./rev) produced detrimental effects on the machined surfaces. In some cases, at feeds as high as 13 microm/rev (500 microin./rev), visible scoring was evident. Those surfaces produced with tool feeds less than 5.1 microm/rev had little difference in reflectivity. Measurements indicat d that their reflectivity existed in a range from 96.7% to 99.3% at 10.6 microm.

Methodology of project management at implementation of projects of high-rise construction

NASA Astrophysics Data System (ADS)

Papelniuk, Oksana

2018-03-01

High-rise construction is the perspective direction in urban development. An opportunity to arrange on rather small land plot a huge number of the living and commercial space makes high-rise construction very attractive for developers. However investment projects of high-rise buildings' construction are very expensive and complex that sets a task of effective management of such projects for the company builder. The best tool in this area today is the methodology of project management, which becomes a key factor of efficiency.

Benchmarking CRISPR on-target sgRNA design.

PubMed

Yan, Jifang; Chuai, Guohui; Zhou, Chi; Zhu, Chenyu; Yang, Jing; Zhang, Chao; Gu, Feng; Xu, Han; Wei, Jia; Liu, Qi

2017-02-15

CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats)-based gene editing has been widely implemented in various cell types and organisms. A major challenge in the effective application of the CRISPR system is the need to design highly efficient single-guide RNA (sgRNA) with minimal off-target cleavage. Several tools are available for sgRNA design, while limited tools were compared. In our opinion, benchmarking the performance of the available tools and indicating their applicable scenarios are important issues. Moreover, whether the reported sgRNA design rules are reproducible across different sgRNA libraries, cell types and organisms remains unclear. In our study, a systematic and unbiased benchmark of the sgRNA predicting efficacy was performed on nine representative on-target design tools, based on six benchmark data sets covering five different cell types. The benchmark study presented here provides novel quantitative insights into the available CRISPR tools. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Potential high-frequency off-target mutagenesis induced by CRISPR/Cas9 in Arabidopsis and its prevention.

PubMed

Zhang, Qiang; Xing, Hui-Li; Wang, Zhi-Ping; Zhang, Hai-Yan; Yang, Fang; Wang, Xue-Chen; Chen, Qi-Jun

2018-03-01

We present novel observations of high-specificity SpCas9 variants, sgRNA expression strategies based on mutant sgRNA scaffold and tRNA processing system, and CRISPR/Cas9-mediated T-DNA integrations. Specificity of CRISPR/Cas9 tools has been a major concern along with the reports of their successful applications. We report unexpected observations of high frequency off-target mutagenesis induced by CRISPR/Cas9 in T1 Arabidopsis mutants although the sgRNA was predicted to have a high specificity score. We also present evidence that the off-target effects were further exacerbated in the T2 progeny. To prevent the off-target effects, we tested and optimized two strategies in Arabidopsis, including introduction of a mCherry cassette for a simple and reliable isolation of Cas9-free mutants and the use of highly specific mutant SpCas9 variants. Optimization of the mCherry vectors and subsequent validation found that fusion of tRNA with the mutant rather than the original sgRNA scaffold significantly improves editing efficiency. We then examined the editing efficiency of eight high-specificity SpCas9 variants in combination with the improved tRNA-sgRNA fusion strategy. Our results suggest that highly specific SpCas9 variants require a higher level of expression than their wild-type counterpart to maintain high editing efficiency. Additionally, we demonstrate that T-DNA can be inserted into the cleavage sites of CRISPR/Cas9 targets with high frequency. Altogether, our results suggest that in plants, continuous attention should be paid to off-target effects induced by CRISPR/Cas9 in current and subsequent generations, and that the tools optimized in this report will be useful in improving genome editing efficiency and specificity in plants and other organisms.

A Quality Improvement Activity to Promote Interprofessional Collaboration Among Health Professions Students

PubMed Central

Stevenson, Katherine; Busch, Angela; Scott, Darlene J.; Henry, Carol; Wall, Patricia A.

2009-01-01

Objectives To develop and evaluate a classroom-based curriculum designed to promote interprofessional competencies by having undergraduate students from various health professions work together on system-based problems using quality improvement (QI) methods and tools to improve patient-centered care. Design Students from 4 health care programs (nursing, nutrition, pharmacy, and physical therapy) participated in an interprofessional QI activity. In groups of 6 or 7, students completed pre-intervention and post-intervention reflection tools on attitudes relating to interprofessio nal teams, and a tool designed to evaluate group process. Assessment One hundred thirty-four students (76.6%) completed both self-reflection instruments, and 132 (74.2%) completed the post-course group evaluation instrument. Although already high prior to the activity, students' mean post-intervention reflection scores increased for 12 of 16 items. Post-intervention group evaluation scores reflected a high level of satisfaction with the experience. Conclusion Use of a quality-based case study and QI methodology were an effective approach to enhancing interprofessional experiences among students. PMID:19657497

Dermoscopy, Digital Dermoscopy and Other Diagnostic Tools in the Early Detection of Melanoma and Follow-up of High-risk Skin Cancer Patients.

PubMed

Thomas, Luc; Puig, Susana

2017-07-05

Early detection is a key strategy for reducing the mortality and economic burden associated with melanoma. Dermoscopy is a non-invasive and cost-effective tool for melanoma diagnosis, which has been shown to be a reliable and sensitive method for detecting early-stage skin cancer and reducing the number of unnecessary excisions. Patients at high risk of developing melanoma require long-term surveillance. Use of digital dermoscopy follow-up of these patients has led to improved outcomes. Combined follow-up programmes using total-body photography and digital dermoscopy have led to further improvements in early diagnosis and diagnostic accuracy. Dermoscopy is now widely used by dermatologists, but the public health impact of this tool is yet to be evaluated. Despite the clear advantages of dermoscopy and digital follow-up meth-ods, dermoscopy training and access to digital dermoscopy among dermatologists and general practitioners needs to be improved.

Just-in-time adaptive disturbance estimation for run-to-run control of photolithography overlay

NASA Astrophysics Data System (ADS)

Firth, Stacy K.; Campbell, W. J.; Edgar, Thomas F.

2002-07-01

One of the main challenges to implementations of traditional run-to-run control in the semiconductor industry is a high mix of products in a single factory. To address this challenge, Just-in-time Adaptive Disturbance Estimation (JADE) has been developed. JADE uses a recursive weighted least-squares parameters estimation technique to identify the contributions to variation that are dependent on product, as well as the tools on which the lot was processed. As applied to photolithography overlay, JADE assigns these sources of variation to contributions from the context items: tool, product, reference tool, and reference reticle. Simulations demonstrate that JADE effectively identifies disturbances in contributing context items when the variations are known to be additive. The superior performance of JADE over traditional EWMA is also shown in these simulations. The results of application of JADE to data from a high mix production facility show that JADE still performs better than EWMA, even with the challenges of a real manufacturing environment.

Spark Plasma Co-Sintering of Mechanically Milled Tool Steel and High Speed Steel Powders

PubMed Central

Pellizzari, Massimo; Fedrizzi, Anna; Zadra, Mario

2016-01-01

Hot work tool steel (AISI H13) and high speed steel (AISI M3:2) powders were successfully co-sintered to produce hybrid tool steels that have properties and microstructures that can be modulated for specific applications. To promote co-sintering, which is made difficult by the various densification kinetics of the two steels, the particle sizes and structures were refined by mechanical milling (MM). Near full density samples (>99.5%) showing very fine and homogeneous microstructure were obtained using spark plasma sintering (SPS). The density of the blends (20, 40, 60, 80 wt % H13) was in agreement with the linear rule of mixtures. Their hardness showed a positive deviation, which could be ascribed to the strengthening effect of the secondary particles altering the stress distribution during indentation. A toughening of the M3:2-rich blends could be explained in view of the crack deviation and crack arrest exerted by the H13 particles. PMID:28773603

Optimization and Simulation of SLM Process for High Density H13 Tool Steel Parts

NASA Astrophysics Data System (ADS)

Laakso, Petri; Riipinen, Tuomas; Laukkanen, Anssi; Andersson, Tom; Jokinen, Antero; Revuelta, Alejandro; Ruusuvuori, Kimmo

This paper demonstrates the successful printing and optimization of processing parameters of high-strength H13 tool steel by Selective Laser Melting (SLM). D-Optimal Design of Experiments (DOE) approach is used for parameter optimization of laser power, scanning speed and hatch width. With 50 test samples (1×1×1cm) we establish parameter windows for these three parameters in relation to part density. The calculated numerical model is found to be in good agreement with the density data obtained from the samples using image analysis. A thermomechanical finite element simulation model is constructed of the SLM process and validated by comparing the calculated densities retrieved from the model with the experimentally determined densities. With the simulation tool one can explore the effect of different parameters on density before making any printed samples. Establishing a parameter window provides the user with freedom for parameter selection such as choosing parameters that result in fastest print speed.

Spark Plasma Co-Sintering of Mechanically Milled Tool Steel and High Speed Steel Powders.

PubMed

Pellizzari, Massimo; Fedrizzi, Anna; Zadra, Mario

2016-06-16

Hot work tool steel (AISI H13) and high speed steel (AISI M3:2) powders were successfully co-sintered to produce hybrid tool steels that have properties and microstructures that can be modulated for specific applications. To promote co-sintering, which is made difficult by the various densification kinetics of the two steels, the particle sizes and structures were refined by mechanical milling (MM). Near full density samples (>99.5%) showing very fine and homogeneous microstructure were obtained using spark plasma sintering (SPS). The density of the blends (20, 40, 60, 80 wt % H13) was in agreement with the linear rule of mixtures. Their hardness showed a positive deviation, which could be ascribed to the strengthening effect of the secondary particles altering the stress distribution during indentation. A toughening of the M3:2-rich blends could be explained in view of the crack deviation and crack arrest exerted by the H13 particles.

Kernel based machine learning algorithm for the efficient prediction of type III polyketide synthase family of proteins.

PubMed

Mallika, V; Sivakumar, K C; Jaichand, S; Soniya, E V

2010-07-13

Type III Polyketide synthases (PKS) are family of proteins considered to have significant roles in the biosynthesis of various polyketides in plants, fungi and bacteria. As these proteins shows positive effects to human health, more researches are going on regarding this particular protein. Developing a tool to identify the probability of sequence being a type III polyketide synthase will minimize the time consumption and manpower efforts. In this approach, we have designed and implemented PKSIIIpred, a high performance prediction server for type III PKS where the classifier is Support Vector Machines (SVMs). Based on the limited training dataset, the tool efficiently predicts the type III PKS superfamily of proteins with high sensitivity and specificity. The PKSIIIpred is available at http://type3pks.in/prediction/. We expect that this tool may serve as a useful resource for type III PKS researchers. Currently work is being progressed for further betterment of prediction accuracy by including more sequence features in the training dataset.

FLaapLUC: A pipeline for the generation of prompt alerts on transient Fermi-LAT γ-ray sources

NASA Astrophysics Data System (ADS)

Lenain, J.-P.

2018-01-01

The large majority of high energy sources detected with Fermi-LAT are blazars, which are known to be very variable sources. High cadence long-term monitoring simultaneously at different wavelengths being prohibitive, the study of their transient activities can help shedding light on our understanding of these objects. The early detection of such potentially fast transient events is the key for triggering follow-up observations at other wavelengths. A Python tool, FLaapLUC, built on top of the Science Tools provided by the Fermi Science Support Center and the Fermi-LAT collaboration, has been developed using a simple aperture photometry approach. This tool can effectively detect relative flux variations in a set of predefined sources and alert potential users. Such alerts can then be used to trigger target of opportunity observations with other facilities. It is shown that FLaapLUC is an efficient tool to reveal transient events in Fermi-LAT data, providing quick results which can be used to promptly organise follow-up observations. Results from this simple aperture photometry method are also compared to full likelihood analyses. The FLaapLUC package is made available on GitHub and is open to contributions by the community.

New tuberculosis technologies: challenges for retooling and scale-up.

PubMed

Pai, M; Palamountain, K M

2012-10-01

The availability of new tools does not mean that they will be adopted, used correctly, scaled up or have public health impact. Experience to date with new diagnostics suggests that many national tuberculosis programmes (NTPs) in high-burden countries are reluctant to adopt and scale up new tools, even when these are backed by evidence and global policy recommendations. We suggest that there are several common barriers to effective national adoption and scale-up of new technologies: global policy recommendations that do not provide sufficient information for scale-up, complex decision-making processes and weak political commitment at the country level, limited engagement of and support to NTP managers, high cost of tools and poor fit with user needs, unregulated markets and inadequate business models, limited capacity for laboratory strengthening and implementation research, and insufficient advocacy and donor support. Overcoming these barriers will require enhanced country-level advocacy, resources, technical assistance and political commitment. Some of the BRICS (Brazil, Russia, India, China, South Africa) countries are emerging as early adopters of policies and technologies, and are increasing their investments in TB control. They may provide the first opportunities to fully assess the public health impact of new tools.

National High School Center Early Warning System Tool v2.0: Technical Manual

ERIC Educational Resources Information Center

National High School Center, 2011

2011-01-01

The Early Warning System (EWS) Tool v2.0 is a Microsoft Excel-based tool developed by the National High School Center at the American Institutes for Research in collaboration with Matrix Knowledge Group. The tool enables schools, districts, and states to identify students who may be at risk of dropping out of high school and to monitor these…

The Effect of Blogging and Electronic Journaling on Writing Skills Development in High School Freshmen

ERIC Educational Resources Information Center

Anderson, Dianne Bruce

2010-01-01

Blogging and computerized journaling are effective tools for writing skill development; however, research has not revealed which specific populations of students are aided by blogging or journaling, nor has research revealed the specific writing skills that are most likely to be improved by these practices. The purpose of the study was to discover…

A Bayesian Performance Prediction Model for Mathematics Education: A Prototypical Approach for Effective Group Composition

ERIC Educational Resources Information Center

Bekele, Rahel; McPherson, Maggie

2011-01-01

This research work presents a Bayesian Performance Prediction Model that was created in order to determine the strength of personality traits in predicting the level of mathematics performance of high school students in Addis Ababa. It is an automated tool that can be used to collect information from students for the purpose of effective group…

Perceived Effectiveness of Internal Executive Coaching Engagements by Participants in a High Potential Leadership Development Program

ERIC Educational Resources Information Center

Figlar, Marilyn Elizabeth Kraus

2014-01-01

The field of executive coaching has grown in popularity as a developmental tool for leaders. With the potential for a leadership continuity gap and the desire for organizations to strengthen leadership talent pools to prepare for succession planning, there is a need for empirical research regarding the effectiveness of executive coaching. The aim…

TOXCAST: A TOOL FOR THE PRIORITIZATION OF CHEMICALS FOR TOXICOLOGICAL EVALUATION

EPA Science Inventory

Due to various legislatiave mandates, the US EPA is faced with evaluating the potential of tens of thousands of chemicals (e.g., high production volume chemicals, pestididal inerts, and drinking water contaminants) to cause adverse human health & environmental effects.

High-Tech Roof Management.

ERIC Educational Resources Information Center

Benzie, Tim

1997-01-01

Describes the use of a computerized roof management system (CRMS) for school districts to foster multiple roof maintenance efficiency and cost effectiveness. Highlights CRMS software manufacturer choices, as well as the types of nondestructive testing equipment tools that can be used to evaluate roof conditions. (GR)

Effects of research tool patents on biotechnology innovation in a developing country: A case study of South Korea

PubMed Central

Kang, Kyung-Nam; Ryu, Tae-Kyu; Lee, Yoon-Sik

2009-01-01

Background Concerns have recently been raised about the negative effects of patents on innovation. In this study, the effects of patents on innovations in the Korean biotech SMEs (small and medium-sized entrepreneurs) were examined using survey data and statistical analysis. Results The survey results of this study provided some evidence that restricted access problems have occurred even though their frequency was not high. Statistical analysis revealed that difficulties in accessing patented research tools were not negatively correlated with the level of innovation performance and attitudes toward the patent system. Conclusion On the basis of the results of this investigation in combination with those of previous studies, we concluded that although restricted access problems have occurred, this has not yet deterred innovation in Korea. However, potential problems do exist, and the effects of restricted access should be constantly scrutinized. PMID:19321013

Mediator Effect of TPM between TQM and Business Performance in Malaysia Automotive Industry

NASA Astrophysics Data System (ADS)

Ahmad, M. F.; Zakuan, N.; Rasi, Raja Zuraidah R. M.; Hisyamudin, M. N. N.

2015-05-01

Total Quality Management (TQM) is vital management tool in ensuring a company can success in the continuously growing competition in the global market. In order to survive in the global market with intense competition amongst regions and enterprises, the adoption of tools and techniques are essential in improving business performance. However, only few previous studies have examined the mediators and moderators between TQM and business performance. This present research proposed a TQM performance model with mediator effect of TPM with structural equation modelling, which is a more comprehensive model for developing countries, specifically for Malaysia. A questionnaire was prepared and sent to 1500 companies from automotive industry and the related vendors in Malaysia, giving a 21.3 per cent rate. The result concludes that TPM is partial mediation between and TQM and Business Performance with indirect effect (IE) is 0.25 which can be categorised as high mediator effect.

Effects of research tool patents on biotechnology innovation in a developing country: a case study of South Korea.

PubMed

Kang, Kyung-Nam; Ryu, Tae-Kyu; Lee, Yoon-Sik

2009-03-26

Concerns have recently been raised about the negative effects of patents on innovation. In this study, the effects of patents on innovations in the Korean biotech SMEs (small and medium-sized entrepreneurs) were examined using survey data and statistical analysis. The survey results of this study provided some evidence that restricted access problems have occurred even though their frequency was not high. Statistical analysis revealed that difficulties in accessing patented research tools were not negatively correlated with the level of innovation performance and attitudes toward the patent system. On the basis of the results of this investigation in combination with those of previous studies, we concluded that although restricted access problems have occurred, this has not yet deterred innovation in Korea. However, potential problems do exist, and the effects of restricted access should be constantly scrutinized.

Study on boring hardened materials dryly by ultrasonic vibration cutter

NASA Astrophysics Data System (ADS)

Zhang, Jiangzhong; Zhang, Heng; Zhang, Yue

2011-05-01

It has been one of the difficulties that high-precision hole on hardened materials is machined. The supersonic vibration boring acoustic system in the lathe in which supersonic wave energy is applied on tool is introduced to create pulse power on the cutting process. The separation vibration cutting is achieved by the pulse force. The comparative tests on boring accuracy and surface quality are carried. The quality of surface machined by this method is compared to that by grinding. This cutting is the green cutting. The boring process system is stability. Under the condition that the cutting speed is less than or equal to 1/3 the tool vibration speed, the cutting force is pulse force and the Cutting energy is of high concentration in time, space and direction. The pulse energy effects on the cutting unit in less than one ten-thousandth second. Traditional cutting of irregular movement elastic compression are eliminated. The cutting force is greatly reduced. The cutting temperature is at room temperature. The tool life is greatly increased. Shape precision and surface quality is greatly improved. The regulations of the ultrasonic vibration boring dry cutting of hardened material are also summarized. The test results show that the ultrasonic vibration cutting tool boring is of very superior cutting mechanism and is a high-precision deep-hole machining of hardened materials, efficient cutting methods.

IT infrastructure in the era of imaging 3.0.

PubMed

McGinty, Geraldine B; Allen, Bibb; Geis, J Raymond; Wald, Christoph

2014-12-01

Imaging 3.0 is a blueprint for the future of radiology modeled after the description of Web 3.0 as "more connected, more open, and more intelligent." Imaging 3.0 involves radiologists' using their expertise to manage all aspects of imaging care to improve patient safety and outcomes and to deliver high-value care. IT tools are critical elements and drivers of success as radiologists embrace the concepts of Imaging 3.0. Organized radiology, specifically the ACR, is the natural convener and resource for the development of this Imaging 3.0 toolkit. The ACR's new Imaging 3.0 Informatics Committee is actively working to develop the informatics tools radiologists need to improve efficiency, deliver more value, and provide quantitative ways to demonstrate their value in new health care delivery and payment systems. This article takes each step of the process of delivering high-value Imaging 3.0 care and outlines the tools available as well as additional resources available to support practicing radiologists. From the moment when imaging is considered through the delivery of a meaningful and actionable report that is communicated to the referring clinician and, when appropriate, to the patient, Imaging 3.0 IT tools will enable radiologists to position themselves as vital constituents in cost-effective, high-value health care. Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Analyzing social experiments as implemented: A reexamination of the evidence from the HighScope Perry Preschool Program

PubMed Central

Heckman, James; Moon, Seong Hyeok; Pinto, Rodrigo; Savelyev, Peter; Yavitz, Adam

2012-01-01

Social experiments are powerful sources of information about the effectiveness of interventions. In practice, initial randomization plans are almost always compromised. Multiple hypotheses are frequently tested. “Significant” effects are often reported with p-values that do not account for preliminary screening from a large candidate pool of possible effects. This paper develops tools for analyzing data from experiments as they are actually implemented. We apply these tools to analyze the influential HighScope Perry Preschool Program. The Perry program was a social experiment that provided preschool education and home visits to disadvantaged children during their preschool years. It was evaluated by the method of random assignment. Both treatments and controls have been followed from age 3 through age 40. Previous analyses of the Perry data assume that the planned randomization protocol was implemented. In fact, as in many social experiments, the intended randomization protocol was compromised. Accounting for compromised randomization, multiple-hypothesis testing, and small sample sizes, we find statistically significant and economically important program effects for both males and females. We also examine the representativeness of the Perry study. PMID:23255883

Failure mode and effects analysis drastically reduced potential risks in clinical trial conduct.

PubMed

Lee, Howard; Lee, Heechan; Baik, Jungmi; Kim, Hyunjung; Kim, Rachel

2017-01-01

Failure mode and effects analysis (FMEA) is a risk management tool to proactively identify and assess the causes and effects of potential failures in a system, thereby preventing them from happening. The objective of this study was to evaluate effectiveness of FMEA applied to an academic clinical trial center in a tertiary care setting. A multidisciplinary FMEA focus group at the Seoul National University Hospital Clinical Trials Center selected 6 core clinical trial processes, for which potential failure modes were identified and their risk priority number (RPN) was assessed. Remedial action plans for high-risk failure modes (RPN >160) were devised and a follow-up RPN scoring was conducted a year later. A total of 114 failure modes were identified with an RPN score ranging 3-378, which was mainly driven by the severity score. Fourteen failure modes were of high risk, 11 of which were addressed by remedial actions. Rescoring showed a dramatic improvement attributed to reduction in the occurrence and detection scores by >3 and >2 points, respectively. FMEA is a powerful tool to improve quality in clinical trials. The Seoul National University Hospital Clinical Trials Center is expanding its FMEA capability to other core clinical trial processes.

Continuous processing and the applications of online tools in pharmaceutical product manufacture: developments and examples.

PubMed

Ooi, Shing Ming; Sarkar, Srimanta; van Varenbergh, Griet; Schoeters, Kris; Heng, Paul Wan Sia

2013-04-01

Continuous processing and production in pharmaceutical manufacturing has received increased attention in recent years mainly due to the industries' pressing needs for more efficient, cost-effective processes and production, as well as regulatory facilitation. To achieve optimum product quality, the traditional trial-and-error method for the optimization of different process and formulation parameters is expensive and time consuming. Real-time evaluation and the control of product quality using an online process analyzer in continuous processing can provide high-quality production with very high-throughput at low unit cost. This review focuses on continuous processing and the application of different real-time monitoring tools used in the pharmaceutical industry for continuous processing from powder to tablets.

Mindful Self-Hypnosis for Self-Care: An Integrative Model and Illustrative Case Example.

PubMed

Elkins, Gary R; Roberts, R Lynae; Simicich, Lauren

2018-07-01

The combination of mindfulness and self-hypnosis could provide a tool that is easily implemented by individuals who want to care for their well-being in times of high stress. Each discipline has been shown to be effective in relieving stress, and integration could further facilitate change while creating a tool that is highly accessible. There are many similarities between the two practices, such as focusing of attention and the emphasis on mind-body connection. However, important distinctions in psychological (e.g., self-monitoring) and neural (e.g., functional connectivity) elements are noted. A theory of how integrated mindful self-hypnosis may create change is presented. An illustrative case example of mindful self-hypnosis practice and a self-hypnosis transcript are provided.

High Penetration Solar PV Deployment Sunshine State Solar Grid Initiative (SUNGRIN)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meeker, Rick; Steurer, Mischa; Faruque, MD Omar

The report provides results from the Sunshine State Solar Grid Initiative (SUNGRIN) high penetration solar PV deployment project led by Florida State University’s (FSU) Center for Advanced Power Systems (CAPS). FSU CAPS and industry and university partners have completed a five-year effort aimed at enabling effective integration of high penetration levels of grid-connected solar PV generation. SUNGRIN has made significant contributions in the development of simulation-assisted techniques, tools, insight and understanding associated with solar PV effects on electric power system (EPS) operation and the evaluation of mitigation options for maintaining reliable operation. An important element of the project was themore » partnership and participation of six major Florida utilities and the Florida Reliability Coordinating Council (FRCC). Utilities provided details and data associated with actual distribution circuits having high-penetration PV to use as case studies. The project also conducted foundational work supporting future investigations of effects at the transmission / bulk power system level. In the final phase of the project, four open-use models with built-in case studies were developed and released, along with synthetic solar PV data sets, and tools and techniques for model reduction and in-depth parametric studies of solar PV impact on distribution circuits. Along with models and data, at least 70 supporting MATLAB functions have been developed and made available, with complete documentation.« less

Risk assessment tools to identify women with increased risk of osteoporotic fracture: complexity or simplicity? A systematic review.

PubMed

Rubin, Katrine Hass; Friis-Holmberg, Teresa; Hermann, Anne Pernille; Abrahamsen, Bo; Brixen, Kim

2013-08-01

A huge number of risk assessment tools have been developed. Far from all have been validated in external studies, more of them have absence of methodological and transparent evidence, and few are integrated in national guidelines. Therefore, we performed a systematic review to provide an overview of existing valid and reliable risk assessment tools for prediction of osteoporotic fractures. Additionally, we aimed to determine if the performance of each tool was sufficient for practical use, and last, to examine whether the complexity of the tools influenced their discriminative power. We searched PubMed, Embase, and Cochrane databases for papers and evaluated these with respect to methodological quality using the Quality Assessment Tool for Diagnostic Accuracy Studies (QUADAS) checklist. A total of 48 tools were identified; 20 had been externally validated, however, only six tools had been tested more than once in a population-based setting with acceptable methodological quality. None of the tools performed consistently better than the others and simple tools (i.e., the Osteoporosis Self-assessment Tool [OST], Osteoporosis Risk Assessment Instrument [ORAI], and Garvan Fracture Risk Calculator [Garvan]) often did as well or better than more complex tools (i.e., Simple Calculated Risk Estimation Score [SCORE], WHO Fracture Risk Assessment Tool [FRAX], and Qfracture). No studies determined the effectiveness of tools in selecting patients for therapy and thus improving fracture outcomes. High-quality studies in randomized design with population-based cohorts with different case mixes are needed. Copyright © 2013 American Society for Bone and Mineral Research.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haapio, Appu, E-mail: appu.haapio@vtt.fi

Requirements for the assessment tools of buildings have increased, assessing of building components or separate buildings is not enough. Neighbourhoods, built environment, public transportations, and services, should be considered simultaneously. Number of population living in urban areas is high and increasing rapidly. Urbanisation is a major concern due to its detrimental effects on the environment. The aim of this study is to clarify the field of assessment tools for urban communities by analysing the current situation. The focus is on internationally well known assessment tools; BREEAM Communities, CASBEE for Urban Development and LEED for Neigborhood Development. The interest towards certificationmore » systems is increasing amongst the authorities, and especially amongst the global investors and property developers. Achieved certifications are expected to bring measureable publicity for the developers. The assessment of urban areas enables the comparison of municipalities and urban areas, and notably supports decision making processes. Authorities, city planners, and designers would benefit most from the use of the tools during the decision making process. - Highlights: Black-Right-Pointing-Pointer The urban assessment tools have strong linkage to the region. Black-Right-Pointing-Pointer The tools promote complementary building and retrofitting existing sites. Black-Right-Pointing-Pointer Sharing knowledge and experiences is important in the development of the tools.« less

High-Performance Integrated Virtual Environment (HIVE) Tools and Applications for Big Data Analysis.

PubMed

Simonyan, Vahan; Mazumder, Raja

2014-09-30

The High-performance Integrated Virtual Environment (HIVE) is a high-throughput cloud-based infrastructure developed for the storage and analysis of genomic and associated biological data. HIVE consists of a web-accessible interface for authorized users to deposit, retrieve, share, annotate, compute and visualize Next-generation Sequencing (NGS) data in a scalable and highly efficient fashion. The platform contains a distributed storage library and a distributed computational powerhouse linked seamlessly. Resources available through the interface include algorithms, tools and applications developed exclusively for the HIVE platform, as well as commonly used external tools adapted to operate within the parallel architecture of the system. HIVE is composed of a flexible infrastructure, which allows for simple implementation of new algorithms and tools. Currently, available HIVE tools include sequence alignment and nucleotide variation profiling tools, metagenomic analyzers, phylogenetic tree-building tools using NGS data, clone discovery algorithms, and recombination analysis algorithms. In addition to tools, HIVE also provides knowledgebases that can be used in conjunction with the tools for NGS sequence and metadata analysis.

High-Performance Integrated Virtual Environment (HIVE) Tools and Applications for Big Data Analysis

PubMed Central

Simonyan, Vahan; Mazumder, Raja

2014-01-01

The High-performance Integrated Virtual Environment (HIVE) is a high-throughput cloud-based infrastructure developed for the storage and analysis of genomic and associated biological data. HIVE consists of a web-accessible interface for authorized users to deposit, retrieve, share, annotate, compute and visualize Next-generation Sequencing (NGS) data in a scalable and highly efficient fashion. The platform contains a distributed storage library and a distributed computational powerhouse linked seamlessly. Resources available through the interface include algorithms, tools and applications developed exclusively for the HIVE platform, as well as commonly used external tools adapted to operate within the parallel architecture of the system. HIVE is composed of a flexible infrastructure, which allows for simple implementation of new algorithms and tools. Currently, available HIVE tools include sequence alignment and nucleotide variation profiling tools, metagenomic analyzers, phylogenetic tree-building tools using NGS data, clone discovery algorithms, and recombination analysis algorithms. In addition to tools, HIVE also provides knowledgebases that can be used in conjunction with the tools for NGS sequence and metadata analysis. PMID:25271953

Improving Nursing Communication Skills in an Intensive Care Unit Using Simulation and Nursing Crew Resource Management Strategies: An Implementation Project.

PubMed

Turkelson, Carman; Aebersold, Michelle; Redman, Richard; Tschannen, Dana

Effective interprofessional communication is critical to patient safety. This pre-/postimplementation project used a multifaceted educational strategy with high-fidelity simulation to introduce evidence-based communication tools, adapted from Nursing Crew Resource Management, to intensive care unit nurses. Results indicated that participants were satisfied with the education, and their perceptions of interprofessional communication and knowledge improved. Teams (n = 16) that used the communication tools during simulation were more likely to identify the problem, initiate key interventions, and have positive outcomes.

Effectiveness and usability of Scanning Wizard software: a tool for enhancing switch scanning.

PubMed

Koester, Heidi Horstmann; Simpson, Richard C

2017-11-24

Scanning Wizard software helps scanning users improve the setup of their switch and scanning system. This study evaluated Scanning Wizard's effectiveness and usability. Ten people who use switch scanning and ten practitioners used Scanning Wizard in the initial session. Usability was high, based on survey responses averaging over 4.5 out of 5, and qualitative feedback was very positive. Five switch users were able to complete the multi-week protocol, using settings on their own scanning system that were recommended from the Scanning Wizard session. Using these revised settings, text entry rates improved by an average of 71%, ranging from 29% to 172% improvement. Results suggest that Scanning Wizard is a useful tool for improving the configuration of scanning systems for people who use switch scanning to communicate. Implications for Rehabilitation Some individuals with severe physical impairments use switch scanning for spoken and written communication. Scanning Wizard software helps scanning users improve the setup of their switch and scanning system. This study demonstrated high usability of Scanning Wizard (with 10 switch userpractitioner teams) and increased text entry rate by an average of 71% (for five switch users). Results suggest that Scanning Wizard is a useful tool for improving the configuration of scanning systems for people who use switch scanning to communicate.

An investigation of chatter and tool wear when machining titanium

NASA Technical Reports Server (NTRS)

Sutherland, I. A.

1974-01-01

The low thermal conductivity of titanium, together with the low contact area between chip and tool and the unusually high chip velocities, gives rise to high tool tip temperatures and accelerated tool wear. Machining speeds have to be considerably reduced to avoid these high temperatures with a consequential loss of productivity. Restoring this lost productivity involves increasing other machining variables, such as feed and depth-of-cut, and can lead to another machining problem commonly known as chatter. This work is to acquaint users with these problems, to examine the variables that may be encountered when machining a material like titanium, and to advise the machine tool user on how to maximize the output from the machines and tooling available to him. Recommendations are made on ways of improving tolerances, reducing machine tool instability or chatter, and improving productivity. New tool materials, tool coatings, and coolants are reviewed and their relevance examined when machining titanium.

Remote Control of Neuronal Signaling

PubMed Central

Rogan, Sarah C.

2011-01-01

A significant challenge for neuroscientists is to determine how both electrical and chemical signals affect the activity of cells and circuits and how the nervous system subsequently translates that activity into behavior. Remote, bidirectional manipulation of those signals with high spatiotemporal precision is an ideal approach to addressing that challenge. Neuroscientists have recently developed a diverse set of tools that permit such experimental manipulation with varying degrees of spatial, temporal, and directional control. These tools use light, peptides, and small molecules to primarily activate ion channels and G protein-coupled receptors (GPCRs) that in turn activate or inhibit neuronal firing. By monitoring the electrophysiological, biochemical, and behavioral effects of such activation/inhibition, researchers can better understand the links between brain activity and behavior. Here, we review the tools that are available for this type of experimentation. We describe the development of the tools and highlight exciting in vivo data. We focus primarily on designer GPCRs (receptors activated solely by synthetic ligands, designer receptors exclusively activated by designer drugs) and microbial opsins (e.g., channelrhodopsin-2, halorhodopsin, Volvox carteri channelrhodopsin) but also describe other novel techniques that use orthogonal receptors, caged ligands, allosteric modulators, and other approaches. These tools differ in the direction of their effect (activation/inhibition, hyperpolarization/depolarization), their onset and offset kinetics (milliseconds/minutes/hours), the degree of spatial resolution they afford, and their invasiveness. Although none of these tools is perfect, each has advantages and disadvantages, which we describe, and they are all still works in progress. We conclude with suggestions for improving upon the existing tools. PMID:21415127

An effective approach for road asset management through the FDTD simulation of the GPR signal

NASA Astrophysics Data System (ADS)

Benedetto, Andrea; Pajewski, Lara; Adabi, Saba; Kusayanagi, Wolfgang; Tosti, Fabio

2015-04-01

Ground-penetrating radar is a non-destructive tool widely used in many fields of application including pavement engineering surveys. Over the last decade, the need for further breakthroughs capable to assist end-users and practitioners as decision-support systems in more effective road asset management is increasing. In more details and despite the high potential and the consolidated results obtained over years by this non-destructive tool, pavement distress manuals are still based on visual inspections, so that only the effects and not the causes of faults are generally taken into account. In this framework, the use of simulation can represent an effective solution for supporting engineers and decision-makers in understanding the deep responses of both revealed and unrevealed damages. In this study, the potential of using finite-difference time-domain simulation of the ground-penetrating radar signal is analyzed by simulating several types of flexible pavement at different center frequencies of investigation typically used for road surveys. For these purposes, the numerical simulator GprMax2D, implementing the finite-difference time-domain method, was used, proving to be a highly effective tool for detecting road faults. In more details, comparisons with simplified undisturbed modelled pavement sections were carried out showing promising agreements with theoretical expectations, and good chances for detecting the shape of damages are demonstrated. Therefore, electromagnetic modelling has proved to represent a valuable support system in diagnosing the causes of damages, even for early or unrevealed faults. Further perspectives of this research will be focused on the modelling of more complex scenarios capable to represent more accurately the real boundary conditions of road cross-sections. Acknowledgements - This work has benefited from networking activities carried out within the EU funded COST Action TU1208 "Civil Engineering Applications of Ground Penetrating Radar".

Pharmacological repositioning of Achyranthes aspera as an antidepressant using pharmacoinformatic tools PASS and PharmaExpert: a case study with wet lab validation.

PubMed

Goel, R K; Gawande, D Y; Lagunin, A A; Poroikov, V V

2018-01-01

Traditional knowledge guides the use of plants for restricted therapeutic indications, but their pharmacological actions may be found beyond their ethnic therapeutic indications employing emerging computational tools. In this context, the present study was envisaged to explore the novel pharmacological effect of Achyranthes aspera (A. aspera) using PASS and PharmaExpert software tools. Based on the predicted mechanisms of the antidepressant effect for all analysed phytoconstituents of A. aspera, one may suggest its significant antidepressant action. The possible mechanism of this novel pharmacological effect is the enhancement of serotonin release, in particular caused by hexatriacontane. Therefore, pharmacological validation of the methanolic extract, hexatriacontane rich (HRF) and hexatriacontane lacking fraction (HLF) of A. aspera was carried out using the Forced Swimming Test and Tail suspension test in mice. The cortical and hippocampal monoamine and their metabolite levels were measured using high performance liquid chromatography (HPLC). A. aspera methanolic extract, HRF treatments showed a significant antidepressant effect comparable to imipramine. Further, the corresponding surge in cortical and hippocampal monoamine and their metabolite levels was also observed with these treatments. In conclusion, A. aspera has shown a significant antidepressant effect, possibly due to hexatriacontane, by raising monoamine levels.

High-density fuel effects. Final report, September 1985-April 1988

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rizk, N.K.; Oechsie, V.L.; Ross, P.T.

1988-08-18

The purpose of this program was to determine, by combustor rig tests and data evaluation, the effects of the high-density fuel properties on the performance and durability of the Allison T56-A-15 combustion system. Four high-density fuels in addition to baseline JP4 were evaluated in the effort. The rig-test program included: nozzle-flow bench testing, aerothermal performance and wall temperature, flame stability and ignition, injector coking and plugging, and flow-transient effect. The data-evaluation effort involved the utilization of empirical correlations in addition to analytical multidimensional tools to analyze the performance of the combustor. The modifications required to optimize the performance with high-densitymore » fuels were suggested and the expected improvement in performance was evaluated.« less

Prioritization of malaria endemic zones using self-organizing maps in the Manipur state of India.

PubMed

Murty, Upadhyayula Suryanarayana; Srinivasa Rao, Mutheneni; Misra, Sunil

2008-09-01

Due to the availability of a huge amount of epidemiological and public health data that require analysis and interpretation by using appropriate mathematical tools to support the existing method to control the mosquito and mosquito-borne diseases in a more effective way, data-mining tools are used to make sense from the chaos. Using data-mining tools, one can develop predictive models, patterns, association rules, and clusters of diseases, which can help the decision-makers in controlling the diseases. This paper mainly focuses on the applications of data-mining tools that have been used for the first time to prioritize the malaria endemic regions in Manipur state by using Self Organizing Maps (SOM). The SOM results (in two-dimensional images called Kohonen maps) clearly show the visual classification of malaria endemic zones into high, medium and low in the different districts of Manipur, and will be discussed in the paper.

Performance and Sizing Tool for Quadrotor Biplane Tailsitter UAS

NASA Astrophysics Data System (ADS)

Strom, Eric

The Quadrotor-Biplane-Tailsitter (QBT) configuration is the basis for a mechanically simplistic rotorcraft capable of both long-range, high-speed cruise as well as hovering flight. This work presents the development and validation of a set of preliminary design tools built specifically for this aircraft to enable its further development, including: a QBT weight model, preliminary sizing framework, and vehicle analysis tools. The preliminary sizing tool presented here shows the advantage afforded by QBT designs in missions with aggressive cruise requirements, such as offshore wind turbine inspections, wherein transition from a quadcopter configuration to a QBT allows for a 5:1 trade of battery weight for wing weight. A 3D, unsteady panel method utilizing a nonlinear implementation of the Kutta-Joukowsky condition is also presented as a means of computing aerodynamic interference effects and, through the implementation of rotor, body, and wing geometry generators, is prepared for coupling with a comprehensive rotor analysis package.

The development of Zirconia and Copper toughened Alumina ceramic insert

NASA Astrophysics Data System (ADS)

Amalina Sabuan, Nur; Zolkafli, Nurfatini; Mebrahitom, A.; Azhari, Azmir; Mamat, Othman

2018-04-01

Ceramic cutting tools have been utilized in industry for over a century for its productivity and efficiency in machine tools and cutting tool material. However, due to the brittleness property the application has been limited. In order to manufacture high strength ceramic cutting tools, there is a need for suitable reinforcement to improve its toughness. In this case, copper (Cu) and zirconia (ZrO2) powders were added to investigate the hardness and physical properties of the developed composite insert. A uniaxial pre-forming process of the mix powder was done prior to densification by sintering at 1000 and 1300°C. The effect of the composition of the reinforcement on the hardness, density, shrinkage and microstructure of the inserts was investigated. It was found that an optimum density of 3.26 % and hardness 1385HV was obtained for composite of 10wt % zirconia and 10wt% copper at temperature 1000 °C.

Friction Stir Welding of Dissimilar Al/Al and Al/Non-Al Alloys: A Review

NASA Astrophysics Data System (ADS)

Wang, Xiangbin; Pan, Yi; Lados, Diana A.

2018-05-01

Friction stir welding is a solid-state welding technique that has many advantages over traditional fusion welding, and has been widely adopted in the aerospace and automotive industries. This article reviews research developments in friction stir welding of dissimilar alloys systems, including combinations of aluminum alloys with Mg alloys, Cu, and steel. Microstructural evolution, hardness, tensile and fatigue properties, residual stresses, and corrosion behavior of dissimilar welds will be reported. The effects of processing parameters such as tool rotation and traverse speeds, tool position, material position, and tool geometry on the weld quality are also presented. Discussions on future research directions in friction stir welding will also be provided in the context of existing literature and future high-integrity applications.

HEP Outreach, Inreach, and Web 2.0

NASA Astrophysics Data System (ADS)

Goldfarb, Steven

2011-12-01

I report on current usage of multimedia and social networking "Web 2.0" tools for Education and Outreach in high-energy physics, and discuss their potential for internal communication within large worldwide collaborations, such as those of the LHC. Following a brief description of the history of Web 2.0 development, I present a survey of the most popular sites and describe their usage in HEP to disseminate information to students and the general public. I then discuss the potential of certain specific tools, such as document and multimedia sharing sites, for boosting the speed and effectiveness of information exchange within the collaborations. I conclude with a brief discussion of the successes and failures of these tools, and make suggestions for improved usage in the future.

Perceptions of High School Principals on the Effectiveness of the WASC Self-Study Process in Bringing about School Improvement

ERIC Educational Resources Information Center

Rosa, Victor M.

2013-01-01

Purpose: The purpose of this study was to determine the extent to which California public high school principals perceive the WASC Self-Study Process as a valuable tool for bringing about school improvement. The study specifically examines the principals' perceptions of five components within the Self-Study Process: (1) The creation of the…

Does Self-Regulated Learning-Skills Training Improve High-School Students' Self-Regulation, Math Achievement, and Motivation While Using an Intelligent Tutor?

ERIC Educational Resources Information Center

Barrus, Angela

2013-01-01

This study empirically evaluated the effectiveness of the instructional design, learning tools, and role of the teacher in three versions of a semester-long, high-school remedial Algebra I course to determine what impact self-regulated learning skills and learning pattern training have on students' self-regulation, math achievement, and…

Verbal and nonverbal behavior of ability-grouped dyads

NASA Astrophysics Data System (ADS)

Jones, M. Gail; Carter, Glenda

In this study we describe the social interactions of ability-grouped dyads as they constructed knowledge of balance concepts to elucidate the relationship between interactions and conceptual growth. The verbal and nonverbal behaviors of 30 fifth-grade students were recorded as they completed three activities related to balance. These student interactions were examined within a framework of social cognition. For each dyad, characteristics of ability-grouped dyads were identified. Results revealed that high-achieving students effectively used prior experiences, maintained focus on the learning task, and were able to manipulate the equipment effectively to construct knowledge. Low-achieving students exhibited off-task behavior, lacked a metacognitive framework for organizing the learning tasks, centered on irrelevant features of the equipment, and were unable to use language effectively to mediate learning. Within low-high student dyads, high-achieving students typically modeled thinking processes and strategies for manipulating equipment. In addition, they focused the low-achieving students on the components of the tasks while verbally monitoring their progress, thus enabling low students to identify the critical features necessary for concept construction. These results highlighted the differences that students have in the use of language and tools. Low students' inefficient use of tools has implications for the ways science teachers structure lessons and group students for laboratory work.Received: 8 March 1993; Revised: 6 January 1994;

Comparison of Performance Predictions for New Low-Thrust Trajectory Tools

NASA Technical Reports Server (NTRS)

Polsgrove, Tara; Kos, Larry; Hopkins, Randall; Crane, Tracie

2006-01-01

Several low thrust trajectory optimization tools have been developed over the last 3% years by the Low Thrust Trajectory Tools development team. This toolset includes both low-medium fidelity and high fidelity tools which allow the analyst to quickly research a wide mission trade space and perform advanced mission design. These tools were tested using a set of reference trajectories that exercised each tool s unique capabilities. This paper compares the performance predictions of the various tools against several of the reference trajectories. The intent is to verify agreement between the high fidelity tools and to quantify the performance prediction differences between tools of different fidelity levels.

Pseudotyped baculovirus is an effective gene expression tool for studying molecular function during axolotl limb regeneration.

PubMed

Oliveira, Catarina R; Lemaitre, Regis; Murawala, Prayag; Tazaki, Akira; Drechsel, David N; Tanaka, Elly M

2018-01-15

Axolotls can regenerate complex structures through recruitment and remodeling of cells within mature tissues. Accessing the underlying mechanisms at a molecular resolution is crucial to understand how injury triggers regeneration and how it proceeds. However, gene transformation in adult tissues can be challenging. Here we characterize the use of pseudotyped baculovirus (BV) as an effective gene transfer method both for cells within mature limb tissue and within the blastema. These cells remain competent to participate in regeneration after transduction. We further characterize the effectiveness of BV for gene overexpression studies by overexpressing Shh in the blastema, which yields a high penetrance of classic polydactyly phenotypes. Overall, our work establishes BV as a powerful tool to access gene function in axolotl limb regeneration. Copyright © 2017 Elsevier Inc. All rights reserved.

Producing Fe-W-Co-Cr-C Alloy Cutting Tool Material Through Powder Metallurgy Route

NASA Astrophysics Data System (ADS)

Datta Banik, Bibhas; Dutta, Debasish; Ray, Siddhartha

2017-04-01

High speed steel tools can withstand high impact forces as they are tough in nature. But they cannot retain their hardness at elevated temperature i.e. their hot hardness is low. Therefore permissible cutting speed is low and tools wear out easily. Use of lubricants is essential for HSS cutting tools. On the other hand cemented carbide tools can withstand greater compressive force, but due to lower toughness the tool can break easily. Moreover the cost of the tool is comparatively high. To achieve a better machining economy, Fe-W-Co-Cr-C alloys are being used nowadays. Their toughness is as good as HSS tools and hardness is very near to carbide tools. Even, at moderate cutting speeds they can be safely used in old machines having vibration. Moreover it is much cheaper than carbide tools. This paper highlights the Manufacturing Technology of the alloy and studies the comparative tribological properties of the alloy and tungsten mono carbide.

Molecular-Level Study of the Effect of Prior Axial Compression/Torsion on the Axial-Tensile Strength of PPTA Fibers

DTIC Science & Technology

2013-07-16

Twaron, etc., which are characterized by high specific strength and high specific stiffness. Fibers of this type are often referred to as ‘‘ballistic... high level of penetration resistance against large kinetic energy projectiles, such as bullets, detonated-mine-induced soil ejecta, improvised...increasingly being designed and developed through an extensive use of computer-aided engineering ( CAE ) methods and tools. The utility of these

Measuring quality in services for children with an intellectual disability.

PubMed

Koornneef, Erik

2006-01-01

To evaluate the application of one particular quality measurement tool, the SERVQUAL instrument, as a potential mechanism to measure quality in services for children with disabilities Staff and family of children with an intellectual disability in two organisations providing specialist therapy and day completed an adapted SERVQUAL questionnaire. A total of 81 SERVQUAL questionnaires were distributed and 59 questionnaires were returned (response rate of 73 per cent). The SERVQUAL instrument can be considered as a useful diagnostic tool to identify particular strengths and areas for improvement in services for people with disabilities as the instrument lends itself for the monitoring of the effectiveness of quality improvement initiatives over time. The findings also showed relatively high customer expectations and the organisations involved in this research are currently not meeting all of these high expectations as significant quality gaps were found in the areas of reliability and responsiveness. The sample size was relatively small and the measurement of quality using the SERVQUAL instrument remains a challenge, due to the conceptual and empirical difficulties. The SERVQUAL instrument is probably most be attractive to service managers and funding organisations because of its ability to identify gaps in the quality of the service. The tool had been used to measure quality in services for people with disabilities and the research has shown that this tool might be an important additional quality measurement tool for services.

MPRAnator: a web-based tool for the design of massively parallel reporter assay experiments

PubMed Central

Georgakopoulos-Soares, Ilias; Jain, Naman; Gray, Jesse M; Hemberg, Martin

2017-01-01

Motivation: With the rapid advances in DNA synthesis and sequencing technologies and the continuing decline in the associated costs, high-throughput experiments can be performed to investigate the regulatory role of thousands of oligonucleotide sequences simultaneously. Nevertheless, designing high-throughput reporter assay experiments such as massively parallel reporter assays (MPRAs) and similar methods remains challenging. Results: We introduce MPRAnator, a set of tools that facilitate rapid design of MPRA experiments. With MPRA Motif design, a set of variables provides fine control of how motifs are placed into sequences, thereby allowing the investigation of the rules that govern transcription factor (TF) occupancy. MPRA single-nucleotide polymorphism design can be used to systematically examine the functional effects of single or combinations of single-nucleotide polymorphisms at regulatory sequences. Finally, the Transmutation tool allows for the design of negative controls by permitting scrambling, reversing, complementing or introducing multiple random mutations in the input sequences or motifs. Availability and implementation: MPRAnator tool set is implemented in Python, Perl and Javascript and is freely available at www.genomegeek.com and www.sanger.ac.uk/science/tools/mpranator. The source code is available on www.github.com/hemberg-lab/MPRAnator/ under the MIT license. The REST API allows programmatic access to MPRAnator using simple URLs. Contact: igs@sanger.ac.uk or mh26@sanger.ac.uk Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27605100

MPRAnator: a web-based tool for the design of massively parallel reporter assay experiments.

PubMed

Georgakopoulos-Soares, Ilias; Jain, Naman; Gray, Jesse M; Hemberg, Martin

2017-01-01

With the rapid advances in DNA synthesis and sequencing technologies and the continuing decline in the associated costs, high-throughput experiments can be performed to investigate the regulatory role of thousands of oligonucleotide sequences simultaneously. Nevertheless, designing high-throughput reporter assay experiments such as massively parallel reporter assays (MPRAs) and similar methods remains challenging. We introduce MPRAnator, a set of tools that facilitate rapid design of MPRA experiments. With MPRA Motif design, a set of variables provides fine control of how motifs are placed into sequences, thereby allowing the investigation of the rules that govern transcription factor (TF) occupancy. MPRA single-nucleotide polymorphism design can be used to systematically examine the functional effects of single or combinations of single-nucleotide polymorphisms at regulatory sequences. Finally, the Transmutation tool allows for the design of negative controls by permitting scrambling, reversing, complementing or introducing multiple random mutations in the input sequences or motifs. MPRAnator tool set is implemented in Python, Perl and Javascript and is freely available at www.genomegeek.com and www.sanger.ac.uk/science/tools/mpranator The source code is available on www.github.com/hemberg-lab/MPRAnator/ under the MIT license. The REST API allows programmatic access to MPRAnator using simple URLs. igs@sanger.ac.uk or mh26@sanger.ac.ukSupplementary information: Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press.

Cement bond evaluation method in horizontal wells using segmented bond tool

NASA Astrophysics Data System (ADS)

Song, Ruolong; He, Li

2018-06-01

Most of the existing cement evaluation technologies suffer from tool eccentralization due to gravity in highly deviated wells and horizontal wells. This paper proposes a correction method to lessen the effects of tool eccentralization on evaluation results of cement bond using segmented bond tool, which has an omnidirectional sonic transmitter and eight segmented receivers evenly arranged around the tool 2 ft from the transmitter. Using 3-D finite difference parallel numerical simulation method, we investigate the logging responses of centred and eccentred segmented bond tool in a variety of bond conditions. From the numerical results, we find that the tool eccentricity and channel azimuth can be estimated from measured sector amplitude. The average of the sector amplitude when the tool is eccentred can be corrected to the one when the tool is centred. Then the corrected amplitude will be used to calculate the channel size. The proposed method is applied to both synthetic and field data. For synthetic data, it turns out that this method can estimate the tool eccentricity with small error and the bond map is improved after correction. For field data, the tool eccentricity has a good agreement with the measured well deviation angle. Though this method still suffers from the low accuracy of calculating channel azimuth, the credibility of corrected bond map is improved especially in horizontal wells. It gives us a choice to evaluate the bond condition for horizontal wells using existing logging tool. The numerical results in this paper can provide aids for understanding measurements of segmented tool in both vertical and horizontal wells.

Using leaf optical properties to detect ozone effects on foliar biochemistry

USDA-ARS?s Scientific Manuscript database

Efficient methods for accurate and meaningful high-throughput plant phenotyping are limiting the development and breeding of stress-tolerant crops. A number of emerging techniques, specifically remote sensing methods, have been identified as promising tools for plant phenotyping. These remote-sensin...

High pressure effects on protein structure and function.

PubMed

Mozhaev, V V; Heremans, K; Frank, J; Masson, P; Balny, C

1996-01-01

Many biochemists would regard pressure as a physical parameter mainly of theoretical interest and of rather limited value in experimental biochemistry. The goal of this overview is to show that pressure is a powerful tool for the study of proteins and modulation of enzymatic activity.

Simulating Effects of High Angle of Attack on Turbofan Engine Performance

NASA Technical Reports Server (NTRS)

Liu, Yuan; Claus, Russell W.; Litt, Jonathan S.; Guo, Ten-Huei

2013-01-01

A method of investigating the effects of high angle of attack (AOA) flight on turbofan engine performance is presented. The methodology involves combining a suite of diverse simulation tools. Three-dimensional, steady-state computational fluid dynamics (CFD) software is used to model the change in performance of a commercial aircraft-type inlet and fan geometry due to various levels of AOA. Parallel compressor theory is then applied to assimilate the CFD data with a zero-dimensional, nonlinear, dynamic turbofan engine model. The combined model shows that high AOA operation degrades fan performance and, thus, negatively impacts compressor stability margins and engine thrust. In addition, the engine response to high AOA conditions is shown to be highly dependent upon the type of control system employed.

Effect of rotation speed and welding speed on Friction Stir Welding of AA1100 Aluminium alloy

NASA Astrophysics Data System (ADS)

Raja, P.; Bojanampati, S.; Karthikeyan, R.; Ganithi, R.

2018-04-01

Aluminum AA1100 is the most widely used grade of Aluminium due to its excellent corrosion resistance, high ductility and reflective finish, the selected material was welded with Friction Stir Welding (FSW) process on a CNC machine, using a combination of different tool rotation speed (1500 rpm, 2500 rpm, 3500 rpm) and welding speed (10 mm/min, 30 mm/min, 50 mm/min) as welding parameters. The effect of FSW using this welding parameter was studied by measuring the ultimate tensile strength of the welded joints. A high-speed steel tool was prepared for welding the Aluminium AA1100 alloy having an 8mm shoulder diameter and pin dimension of 4mm diameter and 2.8 mm length. The welded joints were tested using the universal testing machine. It was found that Ultimate Tensile Strength of FSW specimen was highest with a value of 98.08 MPa when the weld was performed at rotation speed of 1500 RPM and welding speed of 50 mm/min.

High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Roser, Robert

Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3)more » Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.« less

High Energy Physics Forum for Computational Excellence: Working Group Reports (I. Applications Software II. Software Libraries and Tools III. Systems)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Habib, Salman; Roser, Robert; LeCompte, Tom

2015-10-29

Computing plays an essential role in all aspects of high energy physics. As computational technology evolves rapidly in new directions, and data throughput and volume continue to follow a steep trend-line, it is important for the HEP community to develop an effective response to a series of expected challenges. In order to help shape the desired response, the HEP Forum for Computational Excellence (HEP-FCE) initiated a roadmap planning activity with two key overlapping drivers -- 1) software effectiveness, and 2) infrastructure and expertise advancement. The HEP-FCE formed three working groups, 1) Applications Software, 2) Software Libraries and Tools, and 3)more » Systems (including systems software), to provide an overview of the current status of HEP computing and to present findings and opportunities for the desired HEP computational roadmap. The final versions of the reports are combined in this document, and are presented along with introductory material.« less

EFFECTS OF LASER RADIATION ON MATTER. LASER PLASMA: Laser—ultrasonic formation of melts of high-speed tool steels

NASA Astrophysics Data System (ADS)

Gureev, D. M.

1994-09-01

A study was made of the influence of ultrasonic vibrations on the processes of heat and mass transfer, and of structure formation during ultrafast crystallisation of laser melts of T1 high-speed tool steel. Acoustic flows which appeared in laser melts effectively smoothed out the temperature inhomogeneities and flattened the relief of the molten surface even when the laser radiation acted for just ~1 ms. The transformation of the mechanical energy of ultrasonic vibrations into heat increased the depth of the laser melt baths and suppressed crack formation. The observed changes in the structural and phase composition appeared as a change in the microhardness of the solidified laser melts. The geometry of coupling of ultrasound into a laser melt influenced the changes in the microhardness, suggesting a need for a more detailed analysis of the structure formation processes in the course of ultrafast crystallisation of laser melts in an ultrasonic field.

Interactive Media and Simulation Tools for Technical Training

NASA Technical Reports Server (NTRS)

Gramoll, Kurt

1997-01-01

Over the last several years, integration of multiple media sources into a single information system has been rapidly developing. It has been found that when sound, graphics, text, animations, and simulations are skillfully integrated, the sum of the parts exceeds the individual parts for effective learning. In addition, simulations can be used to design and understand complex engineering processes. With the recent introduction of many high-level authoring, animation, modeling, and rendering programs for personal computers, significant multimedia programs can be developed by practicing engineers, scientists and even managers for both training and education. However, even with these new tools, a considerable amount of time is required to produce an interactive multimedia program. The development of both CD-ROM and Web-based programs are discussed in addition to the use of technically oriented animations. Also examined are various multimedia development tools and how they are used to develop effective engineering education courseware. Demonstrations of actual programs in engineering mechanics are shown.

How do Air Traffic Controllers Use Automation and Tools Differently During High Demand Situations?

NASA Technical Reports Server (NTRS)

Kraut, Joshua M.; Mercer, Joey; Morey, Susan; Homola, Jeffrey; Gomez, Ashley; Prevot, Thomas

2013-01-01

In a human-in-the-loop simulation, two air traffic controllers managed identical airspace while burdened with higher than average workload, and while using advanced tools and automation designed to assist with scheduling aircraft on multiple arrival flows to a single meter fix. This paper compares the strategies employed by each controller, and investigates how the controllers' strategies change while managing their airspace under more normal workload conditions and a higher workload condition. Each controller engaged in different methods of maneuvering aircraft to arrive on schedule, and adapted their strategies to cope with the increased workload in different ways. Based on the conclusions three suggestions are made: that quickly providing air traffic controllers with recommendations and information to assist with maneuvering and scheduling aircraft when burdened with increased workload will improve the air traffic controller's effectiveness, that the tools should adapt to the strategy currently employed by a controller, and that training should emphasize which traffic management strategies are most effective given specific airspace demands.

Single molecule tools for enzymology, structural biology, systems biology and nanotechnology: an update

PubMed Central

Widom, Julia R.; Dhakal, Soma; Heinicke, Laurie A.; Walter, Nils G.

2015-01-01

Toxicology is the highly interdisciplinary field studying the adverse effects of chemicals on living organisms. It requires sensitive tools to detect such effects. After their initial implementation during the 1990s, single-molecule fluorescence detection tools were quickly recognized for their potential to contribute greatly to many different areas of scientific inquiry. In the intervening time, technical advances in the field have generated ever-improving spatial and temporal resolution, and have enabled the application of single-molecule fluorescence to increasingly complex systems, such as live cells. In this review, we give an overview of the optical components necessary to implement the most common versions of single-molecule fluorescence detection. We then discuss current applications to enzymology and structural studies, systems biology, and nanotechnology, presenting the technical considerations that are unique to each area of study, along with noteworthy recent results. We also highlight future directions that have the potential to revolutionize these areas of study by further exploiting the capabilities of single-molecule fluorescence microscopy. PMID:25212907

Correction of mid-spatial-frequency errors by smoothing in spin motion for CCOS

NASA Astrophysics Data System (ADS)

Zhang, Yizhong; Wei, Chaoyang; Shao, Jianda; Xu, Xueke; Liu, Shijie; Hu, Chen; Zhang, Haichao; Gu, Haojin

2015-08-01

Smoothing is a convenient and efficient way to correct mid-spatial-frequency errors. Quantifying the smoothing effect allows improvements in efficiency for finishing precision optics. A series experiments in spin motion are performed to study the smoothing effects about correcting mid-spatial-frequency errors. Some of them use a same pitch tool at different spinning speed, and others at a same spinning speed with different tools. Introduced and improved Shu's model to describe and compare the smoothing efficiency with different spinning speed and different tools. From the experimental results, the mid-spatial-frequency errors on the initial surface were nearly smoothed out after the process in spin motion and the number of smoothing times can be estimated by the model before the process. Meanwhile this method was also applied to smooth the aspherical component, which has an obvious mid-spatial-frequency error after Magnetorheological Finishing processing. As a result, a high precision aspheric optical component was obtained with PV=0.1λ and RMS=0.01λ.

Interactive Tools for Measuring Visual Scanning Performance and Reaction Time.

PubMed

Brooks, Johnell; Seeanner, Julia; Hennessy, Sarah; Manganelli, Joseph; Crisler, Matthew; Rosopa, Patrick; Jenkins, Casey; Anderson, Michael; Drouin, Nathalie; Belle, Leah; Truesdail, Constance; Tanner, Stephanie

Occupational therapists are constantly searching for engaging, high-technology interactive tasks that provide immediate feedback to evaluate and train clients with visual scanning deficits. This study examined the relationship between two tools: the VISION COACH™ interactive light board and the Functional Object Detection © (FOD) Advanced driving simulator scenario. Fifty-four healthy drivers, ages 21-66 yr, were divided into three age groups. Participants performed braking response and visual target (E) detection tasks of the FOD Advanced driving scenario, followed by two sets of three trials using the VISION COACH Full Field 60 task. Results showed no significant effect of age on FOD Advanced performance but a significant effect of age on VISION COACH performance. Correlations showed that participants' performance on both braking and E detection tasks were significantly positively correlated with performance on the VISION COACH (.37 < r < .40, p < .01). These tools provide new options for therapists. Copyright © 2017 by the American Occupational Therapy Association, Inc.

High School Online: Pedagogy, Preferences, and Practices of Three Online Teachers

ERIC Educational Resources Information Center

Kerr, Shantia

2011-01-01

This multiple case study explores how three online, high school teachers used technological tools to create meaningful learning activities for their students. Findings reveal that teachers use a wide variety of tools and approaches to online learning. Tools are categorized as content, communication, and management tools. Approaches include…

CAD-supported university course on photonics and fiber optic communications

NASA Astrophysics Data System (ADS)

Chan, David K. C.; Richter, Andre

2002-05-01

The highly competitive global photonics industry has created a significant demand for professional Photonic Design Automation (PDA) tools and personnel trained to use them effectively. In such a dynamic field, CAD-supported courses built around widely used industrial PDA tools provide many advantages, especially when offered through tertiary education institutions (which are ideally suited to producing the future workforce of the Photonics industry). An objective of VPIsystems' University program is to develop tertiary level courses based on VPIsystems' WDM transmission and component modeling software tools. Advantages offered by such courses include: visualizing and aiding the understanding of complex physical problems encountered in the design of fiber-optic communication systems; virtual laboratory exercises that can accurately reproduce the behavior of real systems and components without the prohibitive infrastructure and maintenance costs of real laboratories; flexibility in studying interrelated physical effects individually or in combination to facilitate learning; provide expertise and practical insights in areas, including industry-focused topics, that are not generally covered in traditional tertiary courses; provide exposure to, currently, the most widely used PDA tools in the industry. In this paper, details of VPIsystems' University program and its CAD-supported Photonics courses will be presented.

MemAxes: Visualization and Analytics for Characterizing Complex Memory Performance Behaviors.

PubMed

Gimenez, Alfredo; Gamblin, Todd; Jusufi, Ilir; Bhatele, Abhinav; Schulz, Martin; Bremer, Peer-Timo; Hamann, Bernd

2018-07-01

Memory performance is often a major bottleneck for high-performance computing (HPC) applications. Deepening memory hierarchies, complex memory management, and non-uniform access times have made memory performance behavior difficult to characterize, and users require novel, sophisticated tools to analyze and optimize this aspect of their codes. Existing tools target only specific factors of memory performance, such as hardware layout, allocations, or access instructions. However, today's tools do not suffice to characterize the complex relationships between these factors. Further, they require advanced expertise to be used effectively. We present MemAxes, a tool based on a novel approach for analytic-driven visualization of memory performance data. MemAxes uniquely allows users to analyze the different aspects related to memory performance by providing multiple visual contexts for a centralized dataset. We define mappings of sampled memory access data to new and existing visual metaphors, each of which enabling a user to perform different analysis tasks. We present methods to guide user interaction by scoring subsets of the data based on known performance problems. This scoring is used to provide visual cues and automatically extract clusters of interest. We designed MemAxes in collaboration with experts in HPC and demonstrate its effectiveness in case studies.

Effect of heat treatment on the characteristics of tool steel deposited by the directed energy deposition process

NASA Astrophysics Data System (ADS)

Park, Jun Seok; Lee, Min-Gyu; Cho, Yong-Jae; Sung, Ji Hyun; Jeong, Myeong-Sik; Lee, Sang-Kon; Choi, Yong-Jin; Kim, Da Hye

2016-01-01

The directed energy deposition process has been mainly applied to re-work and the restoration of damaged steel. Differences in material properties between the base and the newly deposited materials are unavoidable, which may affect the mechanical properties and durability of the part. We investigated the effect of heat treatment on the characteristics of tool steel deposited by the DED process. We prepared general tool steel materials of H13 and D2 that were deposited onto heat-treated substrates of H13 and D2, respectively, using a direct metal tooling process. The hardness and microstructure of the deposited steel before and after heat treatment were investigated. The hardness of the deposited H13 steel was higher than that of wrought H13 steel substrate, while that of the deposited D2 was lower than that of wrought D2. The evolution of the microstructures by deposition and heat treatment varied depending on the materials. In particular, the microstructure of the deposited D2 steel after heat treatment consisted of fine carbides in tempered martensite and it is expected that the deposited D2 steel will have isotropic properties and high hardness after heat treatment.

STOCK: Structure mapper and online coarse-graining kit for molecular simulations

DOE PAGES

Bevc, Staš; Junghans, Christoph; Praprotnik, Matej

2015-03-15

We present a web toolkit STructure mapper and Online Coarse-graining Kit for setting up coarse-grained molecular simulations. The kit consists of two tools: structure mapping and Boltzmann inversion tools. The aim of the first tool is to define a molecular mapping from high, e.g. all-atom, to low, i.e. coarse-grained, resolution. Using a graphical user interface it generates input files, which are compatible with standard coarse-graining packages, e.g. VOTCA and DL_CGMAP. Our second tool generates effective potentials for coarse-grained simulations preserving the structural properties, e.g. radial distribution functions, of the underlying higher resolution model. The required distribution functions can be providedmore » by any simulation package. Simulations are performed on a local machine and only the distributions are uploaded to the server. The applicability of the toolkit is validated by mapping atomistic pentane and polyalanine molecules to a coarse-grained representation. Effective potentials are derived for systems of TIP3P (transferable intermolecular potential 3 point) water molecules and salt solution. The presented coarse-graining web toolkit is available at http://stock.cmm.ki.si.« less

Improving Patient Safety: Improving Communication.

PubMed

Bittner-Fagan, Heather; Davis, Joshua; Savoy, Margot

2017-12-01

Communication among physicians, staff, and patients is a critical element in patient safety. Effective communication skills can be taught and improved through training and awareness. The practice of family medicine allows for long-term relationships with patients, which affords opportunities for ongoing, high-quality communication. There are many barriers to effective communication, including patient factors, clinician factors, and system factors, but tools and strategies exist to address these barriers, improve communication, and engage patients in their care. Use of universal precautions for health literacy, appropriate medical interpreters, and shared decision-making are evidence-based tools that improve communication and increase patient safety. Written permission from the American Academy of Family Physicians is required for reproduction of this material in whole or in part in any form or medium.

GPU-accelerated computational tool for studying the effectiveness of asteroid disruption techniques

NASA Astrophysics Data System (ADS)

Zimmerman, Ben J.; Wie, Bong

2016-10-01

This paper presents the development of a new Graphics Processing Unit (GPU) accelerated computational tool for asteroid disruption techniques. Numerical simulations are completed using the high-order spectral difference (SD) method. Due to the compact nature of the SD method, it is well suited for implementation with the GPU architecture, hence solutions are generated at orders of magnitude faster than the Central Processing Unit (CPU) counterpart. A multiphase model integrated with the SD method is introduced, and several asteroid disruption simulations are conducted, including kinetic-energy impactors, multi-kinetic energy impactor systems, and nuclear options. Results illustrate the benefits of using multi-kinetic energy impactor systems when compared to a single impactor system. In addition, the effectiveness of nuclear options is observed.

Key elements of high-quality practice organisation in primary health care: a systematic review.

PubMed

Crossland, Lisa; Janamian, Tina; Jackson, Claire L

2014-08-04

To identify elements that are integral to high-quality practice and determine considerations relating to high-quality practice organisation in primary care. A narrative systematic review of published and grey literature. Electronic databases (PubMed, CINAHL, the Cochrane Library, Embase, Emerald Insight, PsycInfo, the Primary Health Care Research and Information Service website, Google Scholar) were searched in November 2013 and used to identify articles published in English from 2002 to 2013. Reference lists of included articles were searched for relevant unpublished articles and reports. Data were configured at the study level to allow for the inclusion of findings from a broad range of study types. Ten elements were most often included in the existing organisational assessment tools. A further three elements were identified from an inductive thematic analysis of descriptive articles, and were noted as important considerations in effective quality improvement in primary care settings. Although there are some validated tools available to primary care that identify and build quality, most are single-strategy approaches developed outside health care settings. There are currently no validated organisational improvement tools, designed specifically for primary health care, which combine all elements of practice improvement and whose use does not require extensive external facilitation.

WebPrInSeS: automated full-length clone sequence identification and verification using high-throughput sequencing data.

PubMed

Massouras, Andreas; Decouttere, Frederik; Hens, Korneel; Deplancke, Bart

2010-07-01

High-throughput sequencing (HTS) is revolutionizing our ability to obtain cheap, fast and reliable sequence information. Many experimental approaches are expected to benefit from the incorporation of such sequencing features in their pipeline. Consequently, software tools that facilitate such an incorporation should be of great interest. In this context, we developed WebPrInSeS, a web server tool allowing automated full-length clone sequence identification and verification using HTS data. WebPrInSeS encompasses two separate software applications. The first is WebPrInSeS-C which performs automated sequence verification of user-defined open-reading frame (ORF) clone libraries. The second is WebPrInSeS-E, which identifies positive hits in cDNA or ORF-based library screening experiments such as yeast one- or two-hybrid assays. Both tools perform de novo assembly using HTS data from any of the three major sequencing platforms. Thus, WebPrInSeS provides a highly integrated, cost-effective and efficient way to sequence-verify or identify clones of interest. WebPrInSeS is available at http://webprinses.epfl.ch/ and is open to all users.

WebPrInSeS: automated full-length clone sequence identification and verification using high-throughput sequencing data

PubMed Central

Massouras, Andreas; Decouttere, Frederik; Hens, Korneel; Deplancke, Bart

2010-01-01

High-throughput sequencing (HTS) is revolutionizing our ability to obtain cheap, fast and reliable sequence information. Many experimental approaches are expected to benefit from the incorporation of such sequencing features in their pipeline. Consequently, software tools that facilitate such an incorporation should be of great interest. In this context, we developed WebPrInSeS, a web server tool allowing automated full-length clone sequence identification and verification using HTS data. WebPrInSeS encompasses two separate software applications. The first is WebPrInSeS-C which performs automated sequence verification of user-defined open-reading frame (ORF) clone libraries. The second is WebPrInSeS-E, which identifies positive hits in cDNA or ORF-based library screening experiments such as yeast one- or two-hybrid assays. Both tools perform de novo assembly using HTS data from any of the three major sequencing platforms. Thus, WebPrInSeS provides a highly integrated, cost-effective and efficient way to sequence-verify or identify clones of interest. WebPrInSeS is available at http://webprinses.epfl.ch/ and is open to all users. PMID:20501601

What is the place of pre-exposure prophylaxis in HIV prevention?

PubMed

De Man, Jeroen; Colebunders, Robert; Florence, Eric; Laga, Marie; Kenyon, Christopher

2013-01-01

New tools are needed to bring down ongoing high HIV incidence. This review aims to evaluate the place of one of these new tools (pre-exposure prophylaxis) in a comprehensive prevention strategy. Several trials have demonstrated the safety and the efficacy of pre-exposure prophylaxis in HIV prevention. Two large trials have, however, failed to show such efficacy. This was likely due to poor adherence in these trials. New forms of long-acting pre-exposure prophylaxis currently in trials may deal with these problems of low adherence. Pre-exposure prophylaxis has been demonstrated to be cost-effective within certain settings. The introduction of pre-exposure prophylaxis into prevention programs needs to be carefully thought through. For example, pre-exposure prophylaxis-induced risk compensation, at both an individual and population level, could undermine other aspects of a comprehensive HIV prevention program. In conclusion, pre-exposure prophylaxis could be a useful additional tool for the prevention of HIV in specific high-risk groups. It should be implemented in a way that deals with issues such as ensuring high adherence and ensuring that pre-exposure prophylaxis does not detract from, but complements, other more fundamental elements of HIV prevention programs.

IMART software for correction of motion artifacts in images collected in intravital microscopy

PubMed Central

Dunn, Kenneth W; Lorenz, Kevin S; Salama, Paul; Delp, Edward J

2014-01-01

Intravital microscopy is a uniquely powerful tool, providing the ability to characterize cell and organ physiology in the natural context of the intact, living animal. With the recent development of high-resolution microscopy techniques such as confocal and multiphoton microscopy, intravital microscopy can now characterize structures at subcellular resolution and capture events at sub-second temporal resolution. However, realizing the potential for high resolution requires remarkable stability in the tissue. Whereas the rigid structure of the skull facilitates high-resolution imaging of the brain, organs of the viscera are free to move with respiration and heartbeat, requiring additional apparatus for immobilization. In our experience, these methods are variably effective, so that many studies are compromised by residual motion artifacts. Here we demonstrate the use of IMART, a software tool for removing motion artifacts from intravital microscopy images collected in time series or in three dimensions. PMID:26090271

Condition monitoring of turning process using infrared thermography technique - An experimental approach

NASA Astrophysics Data System (ADS)

Prasad, Balla Srinivasa; Prabha, K. Aruna; Kumar, P. V. S. Ganesh

2017-03-01

In metal cutting machining, major factors that affect the cutting tool life are machine tool vibrations, tool tip/chip temperature and surface roughness along with machining parameters like cutting speed, feed rate, depth of cut, tool geometry, etc., so it becomes important for the manufacturing industry to find the suitable levels of process parameters for obtaining maintaining tool life. Heat generation in cutting was always a main topic to be studied in machining. Recent advancement in signal processing and information technology has resulted in the use of multiple sensors for development of the effective monitoring of tool condition monitoring systems with improved accuracy. From a process improvement point of view, it is definitely more advantageous to proactively monitor quality directly in the process instead of the product, so that the consequences of a defective part can be minimized or even eliminated. In the present work, a real time process monitoring method is explored using multiple sensors. It focuses on the development of a test bed for monitoring the tool condition in turning of AISI 316L steel by using both coated and uncoated carbide inserts. Proposed tool condition monitoring (TCM) is evaluated in the high speed turning using multiple sensors such as Laser Doppler vibrometer and infrared thermography technique. The results indicate the feasibility of using the dominant frequency of the vibration signals for the monitoring of high speed turning operations along with temperatures gradient. A possible correlation is identified in both regular and irregular cutting tool wear. While cutting speed and feed rate proved to be influential parameter on the depicted temperatures and depth of cut to be less influential. Generally, it is observed that lower heat and temperatures are generated when coated inserts are employed. It is found that cutting temperatures are gradually increased as edge wear and deformation developed.

Development of a Virtual Reality Exposure Tool as Psychological Preparation for Elective Pediatric Day Care Surgery: Methodological Approach for a Randomized Controlled Trial.

PubMed

Eijlers, Robin; Legerstee, Jeroen S; Dierckx, Bram; Staals, Lonneke M; Berghmans, Johan; van der Schroeff, Marc P; Wijnen, Rene Mh; Utens, Elisabeth Mwj

2017-09-11

Preoperative anxiety in children is highly prevalent and is associated with adverse outcomes. Existing psychosocial interventions to reduce preoperative anxiety are often aimed at distraction and are of limited efficacy. Gradual exposure is a far more effective way to reduce anxiety. Virtual reality (VR) provides a unique opportunity to gradually expose children to all aspects of the operating theater. The aims of our study are (1) to develop a virtual reality exposure (VRE) tool to prepare children psychologically for surgery; and (2) to examine the efficacy of the VRE tool in a randomized controlled trial (RCT), in which VRE will be compared to care as usual (CAU). The VRE tool is highly realistic and resembles the operating room environment accurately. With this tool, children will not only be able to explore the operating room environment, but also get accustomed to general anesthesia procedures. The PREoperative Virtual reality Intervention to Enhance Wellbeing (PREVIEW) study will be conducted. In this single-blinded RCT, 200 consecutive patients (aged 4 to 12 years) undergoing elective day care surgery for dental, oral, or ear-nose-throat problems, will be randomly allocated to the preoperative VRE intervention or CAU. The primary outcome is change in child state anxiety level between baseline and induction of anesthesia. Secondary outcome measures include child's postoperative anxiety, emergence delirium, postoperative pain, use of analgesics, health care use, and pre- and postoperative parental anxiety. The VRE tool has been developed. Participant recruitment began March 2017 and is expected to be completed by September 2018. To our knowledge, this is the first RCT evaluating the effect of a VRE tool to prepare children for surgery. The VRE intervention is expected to significantly diminish preoperative anxiety, postoperative pain, and the use of postoperative analgesics in pediatric patients. The tool could create a less stressful experience for both children and their parents, in line with the modern emphasis on patient- and family-centered care. Netherlands Trial Registry: NTR6116; http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=6116 (Archived by WebCite at http://www.webcitation.org/6ryke7aep). ©Robin Eijlers, Jeroen S Legerstee, Bram Dierckx, Lonneke M Staals, Johan Berghmans, Marc P van der Schroeff, Rene MH Wijnen, Elisabeth MWJ Utens. Originally published in JMIR Research Protocols (http://www.researchprotocols.org), 11.09.2017.

Development of a Virtual Reality Exposure Tool as Psychological Preparation for Elective Pediatric Day Care Surgery: Methodological Approach for a Randomized Controlled Trial

PubMed Central

Eijlers, Robin; Legerstee, Jeroen S; Dierckx, Bram; Staals, Lonneke M; Berghmans, Johan; van der Schroeff, Marc P; Wijnen, Rene MH

2017-01-01

Background Preoperative anxiety in children is highly prevalent and is associated with adverse outcomes. Existing psychosocial interventions to reduce preoperative anxiety are often aimed at distraction and are of limited efficacy. Gradual exposure is a far more effective way to reduce anxiety. Virtual reality (VR) provides a unique opportunity to gradually expose children to all aspects of the operating theater. Objective The aims of our study are (1) to develop a virtual reality exposure (VRE) tool to prepare children psychologically for surgery; and (2) to examine the efficacy of the VRE tool in a randomized controlled trial (RCT), in which VRE will be compared to care as usual (CAU). Methods The VRE tool is highly realistic and resembles the operating room environment accurately. With this tool, children will not only be able to explore the operating room environment, but also get accustomed to general anesthesia procedures. The PREoperative Virtual reality Intervention to Enhance Wellbeing (PREVIEW) study will be conducted. In this single-blinded RCT, 200 consecutive patients (aged 4 to 12 years) undergoing elective day care surgery for dental, oral, or ear-nose-throat problems, will be randomly allocated to the preoperative VRE intervention or CAU. The primary outcome is change in child state anxiety level between baseline and induction of anesthesia. Secondary outcome measures include child’s postoperative anxiety, emergence delirium, postoperative pain, use of analgesics, health care use, and pre- and postoperative parental anxiety. Results The VRE tool has been developed. Participant recruitment began March 2017 and is expected to be completed by September 2018. Conclusions To our knowledge, this is the first RCT evaluating the effect of a VRE tool to prepare children for surgery. The VRE intervention is expected to significantly diminish preoperative anxiety, postoperative pain, and the use of postoperative analgesics in pediatric patients. The tool could create a less stressful experience for both children and their parents, in line with the modern emphasis on patient- and family-centered care. Trial Registration Netherlands Trial Registry: NTR6116; http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=6116 (Archived by WebCite at http://www.webcitation.org/6ryke7aep) PMID:28893727

Data quality control and tools in passive seismic experiments exemplified on the Czech broadband seismic pool MOBNET in the AlpArray collaborative project

NASA Astrophysics Data System (ADS)

Vecsey, Luděk; Plomerová, Jaroslava; Jedlička, Petr; Munzarová, Helena; Babuška, Vladislav; AlpArray Working Group

2017-12-01

This paper focuses on major issues related to the data reliability and network performance of 20 broadband (BB) stations of the Czech (CZ) MOBNET (MOBile NETwork) seismic pool within the AlpArray seismic experiments. Currently used high-resolution seismological applications require high-quality data recorded for a sufficiently long time interval at seismological observatories and during the entire time of operation of the temporary stations. In this paper we present new hardware and software tools we have been developing during the last two decades while analysing data from several international passive experiments. The new tools help to assure the high-quality standard of broadband seismic data and eliminate potential errors before supplying data to seismological centres. Special attention is paid to crucial issues like the detection of sensor misorientation, timing problems, interchange of record components and/or their polarity reversal, sensor mass centring, or anomalous channel amplitudes due to, for example, imperfect gain. Thorough data quality control should represent an integral constituent of seismic data recording, preprocessing, and archiving, especially for data from temporary stations in passive seismic experiments. Large international seismic experiments require enormous efforts from scientists from different countries and institutions to gather hundreds of stations to be deployed in the field during a limited time period. In this paper, we demonstrate the beneficial effects of the procedures we have developed for acquiring a reliable large set of high-quality data from each group participating in field experiments. The presented tools can be applied manually or automatically on data from any seismic network.

Automated Engineering Design (AED); An approach to automated documentation

NASA Technical Reports Server (NTRS)

Mcclure, C. W.

1970-01-01

The automated engineering design (AED) is reviewed, consisting of a high level systems programming language, a series of modular precoded subroutines, and a set of powerful software machine tools that effectively automate the production and design of new languages. AED is used primarily for development of problem and user-oriented languages. Software production phases are diagramed, and factors which inhibit effective documentation are evaluated.

Effects of Concept-Mapping-Based Interactive E-Books on Active and Reflective-Style Students' Learning Performances in Junior High School Law Courses

ERIC Educational Resources Information Center

Hwang, Gwo-Jen; Sung, Han-Yu; Chang, Hsuan

2017-01-01

Researchers have pointed out that interactive e-books have rich content and interactive features which can promote students' learning interest. However, researchers have also indicated the need to integrate effective learning supports or tools to help students organize what they have learned so as to increase their learning performance, in…

EFFECTS OF MANAGEMENT FACTORS ON THE CONCENTRATION OF A HIGH MOLECULAR WEIGHT POLYSACCARIDE FRACTION FROM LOG-GROWN SHIITAKE MUSHROOMS (Lentinula edodes (Berk.) Pegler)

USDA-ARS?s Scientific Manuscript database

Shiitake mushrooms have a reputation as a healthy food. Growers may be able to use the presence of health promoting constituents as a marketing tool to promote sales of their products for premium prices. There are few reports on the effects of management protocols for log-grown shiitakes on the conc...

REACH-ER: a tool to evaluate river basin remediation measures for contaminants at the catchment scale

NASA Astrophysics Data System (ADS)

van Griensven, Ann; Haest, Pieter Jan; Broekx, Steven; Seuntjens, Piet; Campling, Paul; Ducos, Geraldine; Blaha, Ludek; Slobodnik, Jaroslav

2010-05-01

The European Union (EU) adopted the Water Framework Directive (WFD) in 2000 ensuring that all aquatic ecosystems meet ‘good status' by 2015. However, it is a major challenge for river basin managers to meet this requirement in river basins with a high population density as well as intensive agricultural and industrial activities. The EU financed AQUAREHAB project (FP7) specifically examines the ecological and economic impact of innovative rehabilitation technologies for multi-pressured degraded water bodies. For this purpose, a generic collaborative management tool ‘REACH-ER' is being developed that can be used by stakeholders, citizens and water managers to evaluate the ecological and economical effects of different remedial actions on waterbodies. The tool is built using databases from large scale models simulating the hydrological dynamics of the river basing and sub-basins, the costs of the measures and the effectiveness of the measures in terms of ecological impact. Knowledge rules are used to describe the relationships between these data in order to compute the flux concentrations or to compute the effectiveness of measures. The management tool specifically addresses nitrate pollution and pollution by organic micropollutants. Detailed models are also used to predict the effectiveness of site remedial technologies using readily available global data. Rules describing ecological impacts are derived from ecotoxicological data for (mixtures of) specific contaminants (msPAF) and ecological indices relating effects to the presence of certain contaminants. Rules describing the cost-effectiveness of measures are derived from linear programming models identifying the least-cost combination of abatement measures to satisfy multi-pollutant reduction targets and from multi-criteria analysis.

Combining molecular fingerprints with multidimensional scaling analyses to identify the source of spilled oil from highly similar suspected oils.

PubMed

Zhou, Peiyu; Chen, Changshu; Ye, Jianjun; Shen, Wenjie; Xiong, Xiaofei; Hu, Ping; Fang, Hongda; Huang, Chuguang; Sun, Yongge

2015-04-15

Oil fingerprints have been a powerful tool widely used for determining the source of spilled oil. In most cases, this tool works well. However, it is usually difficult to identify the source if the oil spill accident occurs during offshore petroleum exploration due to the highly similar physiochemical characteristics of suspected oils from the same drilling platform. In this report, a case study from the waters of the South China Sea is presented, and multidimensional scaling analysis (MDS) is introduced to demonstrate how oil fingerprints can be combined with mathematical methods to identify the source of spilled oil from highly similar suspected sources. The results suggest that the MDS calculation based on oil fingerprints and subsequently integrated with specific biomarkers in spilled oils is the most effective method with a great potential for determining the source in terms of highly similar suspected oils. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effectiveness of Cooperative Learning Instructional Tools With Predict-Observe-Explain Strategy on the Topic of Cuboid and Cube Volume

NASA Astrophysics Data System (ADS)

Nurhuda; Lukito, A.; Masriyah

2018-01-01

This study aims to develop instructional tools and implement it to see the effectiveness. The method used in this research referred to Designing Effective Instruction. Experimental research with two-group pretest-posttest design method was conducted. The instructional tools have been developed is cooperative learning model with predict-observe-explain strategy on the topic of cuboid and cube volume which consist of lesson plans, POE tasks, and Tests. Instructional tools were of good quality by criteria of validity, practicality, and effectiveness. These instructional tools was very effective for teaching the volume of cuboid and cube. Cooperative instructional tool with predict-observe-explain (POE) strategy was good of quality because the teacher was easy to implement the steps of learning, students easy to understand the material and students’ learning outcomes completed classically. Learning by using this instructional tool was effective because learning activities were appropriate and students were very active. Students’ learning outcomes were completed classically and better than conventional learning. This study produced a good instructional tool and effectively used in learning. Therefore, these instructional tools can be used as an alternative to teach volume of cuboid and cube topics.

Supportive supervision and constructive relationships with healthcare workers support CHW performance: Use of a qualitative framework to evaluate CHW programming in Uganda.

PubMed

Ludwick, Teralynn; Turyakira, Eleanor; Kyomuhangi, Teddy; Manalili, Kimberly; Robinson, Sheila; Brenner, Jennifer L

2018-02-13

While evidence supports community health worker (CHW) capacity to improve maternal and newborn health in less-resourced countries, key implementation gaps remain. Tools for assessing CHW performance and evidence on what programmatic components affect performance are lacking. This study developed and tested a qualitative evaluative framework and tool to assess CHW team performance in a district program in rural Uganda. A new assessment framework was developed to collect and analyze qualitative evidence based on CHW perspectives on seven program components associated with effectiveness (selection; training; community embeddedness; peer support; supportive supervision; relationship with other healthcare workers; retention and incentive structures). Focus groups were conducted with four high/medium-performing CHW teams and four low-performing CHW teams selected through random, stratified sampling. Content analysis involved organizing focus group transcripts according to the seven program effectiveness components, and assigning scores to each component per focus group. Four components, 'supportive supervision', 'good relationships with other healthcare workers', 'peer support', and 'retention and incentive structures' received the lowest overall scores. Variances in scores between 'high'/'medium'- and 'low'-performing CHW teams were largest for 'supportive supervision' and 'good relationships with other healthcare workers.' Our analysis suggests that in the Bushenyi intervention context, CHW team performance is highly correlated with the quality of supervision and relationships with other healthcare workers. CHWs identified key performance-related issues of absentee supervisors, referral system challenges, and lack of engagement/respect by health workers. Other less-correlated program components warrant further study and may have been impacted by relatively consistent program implementation within our limited study area. Applying process-oriented measurement tools are needed to better understand CHW performance-related factors and build a supportive environment for CHW program effectiveness and sustainability. Findings from a qualitative, multi-component tool developed and applied in this study suggest that factors related to (1) supportive supervision and (2) relationships with other healthcare workers may be strongly associated with variances in performance outcomes within a program. Careful consideration of supervisory structure and health worker orientation during program implementation are among strategies proposed to increase CHW performance.

Manure management effects on phosphorus biotransformations and losses in animal production

USDA-ARS?s Scientific Manuscript database

The bioactivity of manure P is highly dynamic and dependent on interactions with the reactive soil surface and biologically mediated transformations. Biological tools that combine ligand exchange and enzyme-mediated mineralization of organic P can mimic plants and microorganisms in their ways of acq...

Investigation of the shape transferability of nanoscale multi-tip diamond tools in the diamond turning of nanostructures

NASA Astrophysics Data System (ADS)

Luo, Xichun; Tong, Zhen; Liang, Yingchun

2014-12-01

In this article, the shape transferability of using nanoscale multi-tip diamond tools in the diamond turning for scale-up manufacturing of nanostructures has been demonstrated. Atomistic multi-tip diamond tool models were built with different tool geometries in terms of the difference in the tip cross-sectional shape, tip angle, and the feature of tool tip configuration, to determine their effect on the applied forces and the machined nano-groove geometries. The quality of machined nanostructures was characterized by the thickness of the deformed layers and the dimensional accuracy achieved. Simulation results show that diamond turning using nanoscale multi-tip tools offers tremendous shape transferability in machining nanostructures. Both periodic and non-periodic nano-grooves with different cross-sectional shapes can be successfully fabricated using the multi-tip tools. A hypothesis of minimum designed ratio of tool tip distance to tip base width (L/Wf) of the nanoscale multi-tip diamond tool for the high precision machining of nanostructures was proposed based on the analytical study of the quality of the nanostructures fabricated using different types of the multi-tip tools. Nanometric cutting trials using nanoscale multi-tip diamond tools (different in L/Wf) fabricated by focused ion beam (FIB) were then conducted to verify the hypothesis. The investigations done in this work imply the potential of using the nanoscale multi-tip diamond tool for the deterministic fabrication of period and non-periodic nanostructures, which opens up the feasibility of using the process as a versatile manufacturing technique in nanotechnology.

Disentangling representations of shape and action components in the tool network.

PubMed

Wang, Xiaoying; Zhuang, Tonghe; Shen, Jiasi; Bi, Yanchao

2018-05-30

Shape and how they should be used are two key components of our knowledge about tools. Viewing tools preferentially activated a frontoparietal and occipitotemporal network, with dorsal regions implicated in computation of tool-related actions and ventral areas in shape representation. As shape and manners of manipulation are highly correlated for daily tools, whether they are independently represented in different regions remains inconclusive. In the current study, we collected fMRI data when participants viewed blocks of pictures of four daily tools (i.e., paintbrush, corkscrew, screwdriver, razor) where shape and action (manner of manipulation for functional use) were orthogonally manipulated, to tease apart these two dimensions. Behavioral similarity judgments tapping on object shape and finer aspects of actions (i.e., manners of motion, magnitude of arm movement, configuration of hand) were also collected to further disentangle the representation of object shape and different action components. Information analysis and representational similarity analysis were conducted on regional neural activation patterns of the tool-preferring network. In both analyses, the bilateral lateral occipitotemporal cortex showed robust shape representations but could not effectively distinguish between tool-use actions. The frontal and precentral regions represented kinematic action components, whereas the left parietal region (in information analyses) exhibited coding of both shape and tool-use action. By teasing apart shape and action components, we found both dissociation and association of them within the tool network. Taken together, our study disentangles representations for object shape from finer tool-use action components in the tool network, revealing the potential dissociable roles different tool-preferring regions play in tool processing. Copyright © 2018 Elsevier Ltd. All rights reserved.

Dry rotary swaging with structured and coated tools

NASA Astrophysics Data System (ADS)

Herrmann, Marius; Schenck, Christian; Kuhfuss, Bernd

2018-05-01

Rotary swaging is a cold bulk forming process for manufacturing of complex bar and tube profiles like axles and gear shafts in the automotive industry. Conventional rotary swaging is carried out under intense use of lubricant usually based on mineral oil. Besides lubrication the lubricant fulfills necessary functions like lubrication, flushing and cooling, but generates costs for recycling, replacement and cleaning of the workpieces. Hence, the development of a dry process design is highly desirable, both under economic and ecological points of view. Therefore, it is necessary to substitute the functions of the lubricant. This was realized by the combination of newly developed a-C:H:W coating systems on the tools to minimize the friction and to avoid adhesion effects. With the application of a deterministic structure in the forging zone of the tools the friction conditions are modified to control the axial process forces. In this study infeed rotary swaging with functionalized tools was experimentally investigated. Therefore, steel and aluminum tubes were formed with and without lubricant. Different structures which were coated and uncoated were implemented in the reduction zone of the tools. The antagonistic effects of coating and structuring were characterized by measuring the axial process force and the produced workpiece quality in terms of roundness and surface roughness. Thus, the presented results allow for further developments towards a dry rotary swaging process.

Biological effects-based tools for monitoring impacted surface waters in the Great Lakes: a multiagency program in support of the Great Lakes Restoration Initiative

USGS Publications Warehouse

Ekman, Drew R.; Ankley, Gerald T.; Blazer, Vicki; Collette, Timothy W.; Garcia-Reyero, Natàlia; Iwanowicz, Luke R.; Jorgensen, Zachary G.; Lee, Kathy E.; Mazik, Pat M.; Miller, David H.; Perkins, Edward J.; Smith, Edwin T.; Tietge, Joseph E.; Villeneuve, Daniel L.

2013-01-01

There is increasing demand for the implementation of effects-based monitoring and surveillance (EBMS) approaches in the Great Lakes Basin to complement traditional chemical monitoring. Herein, we describe an ongoing multiagency effort to develop and implement EBMS tools, particularly with regard to monitoring potentially toxic chemicals and assessing Areas of Concern (AOCs), as envisioned by the Great Lakes Restoration Initiative (GLRI). Our strategy includes use of both targeted and open-ended/discovery techniques, as appropriate to the amount of information available, to guide a priori end point and/or assay selection. Specifically, a combination of in vivo and in vitro tools is employed by using both wild and caged fish (in vivo), and a variety of receptor- and cell-based assays (in vitro). We employ a work flow that progressively emphasizes in vitro tools for long-term or high-intensity monitoring because of their greater practicality (e.g., lower cost, labor) and relying on in vivo assays for initial surveillance and verification. Our strategy takes advantage of the strengths of a diversity of tools, balancing the depth, breadth, and specificity of information they provide against their costs, transferability, and practicality. Finally, a series of illustrative scenarios is examined that align EBMS options with management goals to illustrate the adaptability and scaling of EBMS approaches and how they can be used in management decisions.

Comparative Effectiveness of Hands-on Versus Computer Simulation-Based Training for Contrast Media Reactions and Teamwork Skills.

PubMed

Wang, Carolyn L; Chinnugounder, Sankar; Hippe, Daniel S; Zaidi, Sadaf; O'Malley, Ryan B; Bhargava, Puneet; Bush, William H

2017-01-01

To assess the performance of interprofessional teams of radiologists, technologists, and nurses trained with high-fidelity hands-on (HO) simulation and computer-based (CB) simulation training for contrast reaction management (CR) and teamwork skills (TS). Nurses, technologists, and radiology residents were randomized into 11 teams of three (one of each). Six teams underwent HO training and five underwent CB training for CR and TS. Participants took written tests before and after training and were further tested using a high-fidelity simulation scenario. HO and CB groups scored similarly on all written tests and each showed improvement after training (P = .002 and P = .018, respectively). During the final scenario test, HO teams tended to receive higher grades than CB teams on CR (95% versus 81%, P = .17) and made fewer errors in epinephrine administration (0/6 versus 2/5, P = .18). HO and CB teams scored similarly on TS (51% versus 52%, P = .66), but overall scores were lower for TS than for CR skills in both the HO (P = .03) and CB teams (P = .06). HO training was more highly rated than CB as an effective educational tool (P = .01) and for effectiveness at teaching CR and team communication skills (P = .02). High-fidelity simulation can be used to both train and test interprofessional teams of radiologists, technologists, and nurses for both CR and TS and is more highly rated as an effective educational tool by participants than similar CB training. However, a single session of either type of training may be inadequate for mastering TS. Copyright © 2016 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Robot based deposition of WC-Co HVOF coatings on HSS cutting tools as a substitution for solid cemented carbide cutting tools

NASA Astrophysics Data System (ADS)

Tillmann, W.; Schaak, C.; Biermann, D.; Aßmuth, R.; Goeke, S.

2017-03-01

Cemented carbide (hard metal) cutting tools are the first choice to machine hard materials or to conduct high performance cutting processes. Main advantages of cemented carbide cutting tools are their high wear resistance (hardness) and good high temperature strength. In contrast, cemented carbide cutting tools are characterized by a low toughness and generate higher production costs, especially due to limited resources. Usually, cemented carbide cutting tools are produced by means of powder metallurgical processes. Compared to conventional manufacturing routes, these processes are more expensive and only a limited number of geometries can be realized. Furthermore, post-processing and preparing the cutting edges in order to achieve high performance tools is often required. In the present paper, an alternative method to substitute solid cemented carbide cutting tools is presented. Cutting tools made of conventional high speed steels (HSS) were coated with thick WC-Co (88/12) layers by means of thermal spraying (HVOF). The challenge is to obtain a dense, homogenous, and near-net-shape coating on the flanks and the cutting edge. For this purpose, different coating strategies were realized using an industrial robot. The coating properties were subsequently investigated. After this initial step, the surfaces of the cutting tools were ground and selected cutting edges were prepared by means of wet abrasive jet machining to achieve a smooth and round micro shape. Machining tests were conducted with these coated, ground and prepared cutting tools. The occurring wear phenomena were analyzed and compared to conventional HSS cutting tools. Overall, the results of the experiments proved that the coating withstands mechanical stresses during machining. In the conducted experiments, the coated cutting tools showed less wear than conventional HSS cutting tools. With respect to the initial wear resistance, additional benefits can be obtained by preparing the cutting edge by means of wet abrasive jet machining.

Use of an In Vivo FTA Assay to Assess the Magnitude, Functional Avidity and Epitope Variant Cross-Reactivity of T Cell Responses Following HIV-1 Recombinant Poxvirus Vaccination

PubMed Central

Wijesundara, Danushka K.; Ranasinghe, Charani; Jackson, Ronald J.; Lidbury, Brett A.; Parish, Christopher R.; Quah, Benjamin J. C.

2014-01-01

Qualitative characteristics of cytotoxic CD8+ T cells (CTLs) are important in measuring the effectiveness of CTLs in controlling HIV-1 infections. Indeed, in recent studies patients who are naturally resistant to HIV-1 infections have been shown to possess CTLs that are of high functional avidity and have a high capacity to recognize HIV epitope variants, when compared to HIV-1 infection progressors. When developing efficacious vaccines, assays that can effectively measure CTL quality specifically in vivo are becoming increasingly important. Here we report the use of a recently developed high-throughput multi-parameter technique, known as the fluorescent target array (FTA) assay, to simultaneously measure CTL killing magnitude, functional avidity and epitope variant cross-reactivity in real time in vivo. In the current study we have applied the FTA assay as a screening tool to assess a large cohort of over 20 different HIV-1 poxvirus vaccination strategies in mice. This screen revealed that heterologous poxvirus prime-boost vaccination regimes (i.e., recombinant fowlpox (FPV)-HIV prime followed by a recombinant vaccinia virus (VV)-HIV booster) were the most effective in generating high quality CTL responses in vivo. In conclusion, we have demonstrated how the FTA assay can be utilized as a cost effective screening tool (by reducing the required number of animals by >100 fold), to evaluate a large range of HIV-1 vaccination strategies in terms of CTL avidity and variant cross-reactivity in an in vivo setting. PMID:25170620

Use of an in vivo FTA assay to assess the magnitude, functional avidity and epitope variant cross-reactivity of T cell responses following HIV-1 recombinant poxvirus vaccination.

PubMed

Wijesundara, Danushka K; Ranasinghe, Charani; Jackson, Ronald J; Lidbury, Brett A; Parish, Christopher R; Quah, Benjamin J C

2014-01-01

Qualitative characteristics of cytotoxic CD8+ T cells (CTLs) are important in measuring the effectiveness of CTLs in controlling HIV-1 infections. Indeed, in recent studies patients who are naturally resistant to HIV-1 infections have been shown to possess CTLs that are of high functional avidity and have a high capacity to recognize HIV epitope variants, when compared to HIV-1 infection progressors. When developing efficacious vaccines, assays that can effectively measure CTL quality specifically in vivo are becoming increasingly important. Here we report the use of a recently developed high-throughput multi-parameter technique, known as the fluorescent target array (FTA) assay, to simultaneously measure CTL killing magnitude, functional avidity and epitope variant cross-reactivity in real time in vivo. In the current study we have applied the FTA assay as a screening tool to assess a large cohort of over 20 different HIV-1 poxvirus vaccination strategies in mice. This screen revealed that heterologous poxvirus prime-boost vaccination regimes (i.e., recombinant fowlpox (FPV)-HIV prime followed by a recombinant vaccinia virus (VV)-HIV booster) were the most effective in generating high quality CTL responses in vivo. In conclusion, we have demonstrated how the FTA assay can be utilized as a cost effective screening tool (by reducing the required number of animals by >100 fold), to evaluate a large range of HIV-1 vaccination strategies in terms of CTL avidity and variant cross-reactivity in an in vivo setting.

The Level of High-Order Thinking and Its Relation to Quality of Life among Students at Ajloun University College

ERIC Educational Resources Information Center

Al Rabadi, Wail Minwer; Salem, Rifqa Khleif

2018-01-01

The study was designed to identify the effect of high-order thinking on the quality of life among Ajloun University students. The study used the associative method. The randomly selected sample consisted of 147 students from Ajloun University College. The study used two tools: The two measures were applied to the sample of the current study after…

PyHLA: tests for the association between HLA alleles and diseases.

PubMed

Fan, Yanhui; Song, You-Qiang

2017-02-06

Recently, several tools have been designed for human leukocyte antigen (HLA) typing using single nucleotide polymorphism (SNP) array and next-generation sequencing (NGS) data. These tools provide high-throughput and cost-effective approaches for identifying HLA types. Therefore, tools for downstream association analysis are highly desirable. Although several tools have been designed for multi-allelic marker association analysis, they were designed only for microsatellite markers and do not scale well with increasing data volumes, or they were designed for large-scale data but provided a limited number of tests. We have developed a Python package called PyHLA, which implements several methods for HLA association analysis, to fill the gap. PyHLA is a tailor-made, easy to use, and flexible tool designed specifically for the association analysis of the HLA types imputed from genome-wide genotyping and NGS data. PyHLA provides functions for association analysis, zygosity tests, and interaction tests between HLA alleles and diseases. Monte Carlo permutation and several methods for multiple testing corrections have also been implemented. PyHLA provides a convenient and powerful tool for HLA analysis. Existing methods have been integrated and desired methods have been added in PyHLA. Furthermore, PyHLA is applicable to small and large sample sizes and can finish the analysis in a timely manner on a personal computer with different platforms. PyHLA is implemented in Python. PyHLA is a free, open source software distributed under the GPLv2 license. The source code, tutorial, and examples are available at https://github.com/felixfan/PyHLA.

Detection of adverse events in general surgery using the " Trigger Tool" methodology.

PubMed

Pérez Zapata, Ana Isabel; Gutiérrez Samaniego, María; Rodríguez Cuéllar, Elías; Andrés Esteban, Eva María; Gómez de la Cámara, Agustín; Ruiz López, Pedro

2015-02-01

Surgery is one of the high-risk areas for the occurrence of adverse events (AE). The purpose of this study is to know the percentage of hospitalisation-related AE that are detected by the «Global Trigger Tool» methodology in surgical patients, their characteristics and the tool validity. Retrospective, observational study on patients admitted to a general surgery department, who underwent a surgical operation in a third level hospital during the year 2012. The identification of AE was carried out by patient record review using an adaptation of «Global Trigger Tool» methodology. Once an AE was identified, a harm category was assigned, including the grade in which the AE could have been avoided and its relation with the surgical procedure. The prevalence of AE was 36,8%. There were 0,5 AE per patient. 56,2% were deemed preventable. 69,3% were directly related to the surgical procedure. The tool had a sensitivity of 86% and a specificity of 93,6%. The positive predictive value was 89% and the negative predictive value 92%. Prevalence of AE is greater than the estimate of other studies. In most cases the AE detected were related to the surgical procedure and more than half were also preventable. The adapted «Global Trigger Tool» methodology has demonstrated to be highly effective and efficient for detecting AE in surgical patients, identifying all the serious AE with few false negative results. Copyright © 2014 AEC. Publicado por Elsevier España, S.L.U. All rights reserved.

Adaptation of a Simple Microfluidic Platform for High-Dimensional Quantitative Morphological Analysis of Human Mesenchymal Stromal Cells on Polystyrene-Based Substrates.

PubMed

Lam, Johnny; Marklein, Ross A; Jimenez-Torres, Jose A; Beebe, David J; Bauer, Steven R; Sung, Kyung E

2017-12-01

Multipotent stromal cells (MSCs, often called mesenchymal stem cells) have garnered significant attention within the field of regenerative medicine because of their purported ability to differentiate down musculoskeletal lineages. Given the inherent heterogeneity of MSC populations, recent studies have suggested that cell morphology may be indicative of MSC differentiation potential. Toward improving current methods and developing simple yet effective approaches for the morphological evaluation of MSCs, we combined passive pumping microfluidic technology with high-dimensional morphological characterization to produce robust tools for standardized high-throughput analysis. Using ultraviolet (UV) light as a modality for reproducible polystyrene substrate modification, we show that MSCs seeded on microfluidic straight channel devices incorporating UV-exposed substrates exhibited morphological changes that responded accordingly to the degree of substrate modification. Substrate modification also effected greater morphological changes in MSCs seeded at a lower rather than higher density within microfluidic channels. Despite largely comparable trends in morphology, MSCs seeded in microscale as opposed to traditional macroscale platforms displayed much higher sensitivity to changes in substrate properties. In summary, we adapted and qualified microfluidic cell culture platforms comprising simple straight channel arrays as a viable and robust tool for high-throughput quantitative morphological analysis to study cell-material interactions.

Using the WHO Surgical Safety Checklist to Direct Perioperative Quality Improvement at a Surgical Hospital in Cambodia: The Importance of Objective Confirmation of Process Completion.

PubMed

Garland, Naomi Y; Kheng, Sokhavatey; De Leon, Michael; Eap, Hourt; Forrester, Jared A; Hay, Janice; Oum, Palritha; Sam Ath, Socheat; Stock, Simon; Yem, Samprathna; Lucas, Gerlinda; Weiser, Thomas G

2017-12-01

The WHO surgical safety checklist (SSC) is known to prevent postoperative complications; however, strategies for effective implementation are unclear. In addition to cultural and organizational barriers faced by high-income countries, resource-constrained settings face scarcity of durable and consumable goods. We used the SSC to better understand barriers to improvement at a trauma hospital in Battambang, Cambodia. We introduced the SSC and trained data collectors to observe surgical staff performing the checklist. Members of the research team observed cases and data collection. After 3 months, we modified the data collection tool to focus on infection prevention and elicit more accurate responses. Over 16 months we recorded data on 695 operations (304 cases using the first tool and 391 cases with the modified tool). The first tool identified five items as being in high compliance, which were then excluded from further assessment. Two items-instrument sterility confirmation and sponge counting-were identified as being misinterpreted by the data collectors' tool. These items were reworded to capture objective assessment of task completion. Confirmation of instrument sterility was initially never performed but rectified to >95% compliance; sponge counting and prophylactic antibiotic administration were consistently underperformed. Staff complied with communication elements of the SSC and quickly adopted process improvements. The wording of our data collection tool affected interpretation of compliance with standards. Material resources are not the primary barrier to checklist implementation in this setting, and future work should focus on clarification of protocols and objective confirmation of tasks.

Treatment default amongst patients with tuberculosis in urban Morocco: predicting and explaining default and post-default sputum smear and drug susceptibility results.

PubMed

Cherkaoui, Imad; Sabouni, Radia; Ghali, Iraqi; Kizub, Darya; Billioux, Alexander C; Bennani, Kenza; Bourkadi, Jamal Eddine; Benmamoun, Abderrahmane; Lahlou, Ouafae; Aouad, Rajae El; Dooley, Kelly E

2014-01-01

Public tuberculosis (TB) clinics in urban Morocco. Explore risk factors for TB treatment default and develop a prediction tool. Assess consequences of default, specifically risk for transmission or development of drug resistance. Case-control study comparing patients who defaulted from TB treatment and patients who completed it using quantitative methods and open-ended questions. Results were interpreted in light of health professionals' perspectives from a parallel study. A predictive model and simple tool to identify patients at high risk of default were developed. Sputum from cases with pulmonary TB was collected for smear and drug susceptibility testing. 91 cases and 186 controls enrolled. Independent risk factors for default included current smoking, retreatment, work interference with adherence, daily directly observed therapy, side effects, quick symptom resolution, and not knowing one's treatment duration. Age >50 years, never smoking, and having friends who knew one's diagnosis were protective. A simple scoring tool incorporating these factors was 82.4% sensitive and 87.6% specific for predicting default in this population. Clinicians and patients described additional contributors to default and suggested locally-relevant intervention targets. Among 89 cases with pulmonary TB, 71% had sputum that was smear positive for TB. Drug resistance was rare. The causes of default from TB treatment were explored through synthesis of qualitative and quantitative data from patients and health professionals. A scoring tool with high sensitivity and specificity to predict default was developed. Prospective evaluation of this tool coupled with targeted interventions based on our findings is warranted. Of note, the risk of TB transmission from patients who default treatment to others is likely to be high. The commonly-feared risk of drug resistance, though, may be low; a larger study is required to confirm these findings.

ATST telescope mount: telescope of machine tool

NASA Astrophysics Data System (ADS)

Jeffers, Paul; Stolz, Günter; Bonomi, Giovanni; Dreyer, Oliver; Kärcher, Hans

2012-09-01

The Advanced Technology Solar Telescope (ATST) will be the largest solar telescope in the world, and will be able to provide the sharpest views ever taken of the solar surface. The telescope has a 4m aperture primary mirror, however due to the off axis nature of the optical layout, the telescope mount has proportions similar to an 8 meter class telescope. The technology normally used in this class of telescope is well understood in the telescope community and has been successfully implemented in numerous projects. The world of large machine tools has developed in a separate realm with similar levels of performance requirement but different boundary conditions. In addition the competitive nature of private industry has encouraged development and usage of more cost effective solutions both in initial capital cost and thru-life operating cost. Telescope mounts move relatively slowly with requirements for high stability under external environmental influences such as wind buffeting. Large machine tools operate under high speed requirements coupled with high application of force through the machine but with little or no external environmental influences. The benefits of these parallel development paths and the ATST system requirements are being combined in the ATST Telescope Mount Assembly (TMA). The process of balancing the system requirements with new technologies is based on the experience of the ATST project team, Ingersoll Machine Tools who are the main contractor for the TMA and MT Mechatronics who are their design subcontractors. This paper highlights a number of these proven technologies from the commercially driven machine tool world that are being introduced to the TMA design. Also the challenges of integrating and ensuring that the differences in application requirements are accounted for in the design are discussed.

Understanding Interrater Reliability and Validity of Risk Assessment Tools Used to Predict Adverse Clinical Events.

PubMed

Siedlecki, Sandra L; Albert, Nancy M

This article will describe how to assess interrater reliability and validity of risk assessment tools, using easy-to-follow formulas, and to provide calculations that demonstrate principles discussed. Clinical nurse specialists should be able to identify risk assessment tools that provide high-quality interrater reliability and the highest validity for predicting true events of importance to clinical settings. Making best practice recommendations for assessment tool use is critical to high-quality patient care and safe practices that impact patient outcomes and nursing resources. Optimal risk assessment tool selection requires knowledge about interrater reliability and tool validity. The clinical nurse specialist will understand the reliability and validity issues associated with risk assessment tools, and be able to evaluate tools using basic calculations. Risk assessment tools are developed to objectively predict quality and safety events and ultimately reduce the risk of event occurrence through preventive interventions. To ensure high-quality tool use, clinical nurse specialists must critically assess tool properties. The better the tool's ability to predict adverse events, the more likely that event risk is mediated. Interrater reliability and validity assessment is relatively an easy skill to master and will result in better decisions when selecting or making recommendations for risk assessment tool use.

A medical home: value and implications of knowledge management.

PubMed

Orzano, A John; McInerney, Claire R; McDaniel, Reuben R; Meese, Abigail; Alajmi, Bibi; Mohr, Stewart M; Tallia, Alfred F

2009-01-01

Central to the "medical home" concept is the premise that the delivery of effective primary care requires a fundamental shift in relationships among practice members and between practice members and patients. Primary care practices can potentially increase their capacity to deliver effective care through knowledge management (KM), a process of sharing and making existing knowledge available or by developing new knowledge among practice members and patients. KM affects performance by influencing work relationships to enhance learning, decision making, and task execution. We extend our previous work to further characterize, describe, and contrast how primary care practices exhibit KM and explain why KM deserves attention in medical home redesign initiatives. Case studies were conducted, drawn from two higher and lower performing practices, which were purposely selected based on disease management, prevention, and productivity measures from an improvement trial. Observations of operations, clinical encounters, meetings, and interviews with office members and patients were transcribed and coded independently using a KM template developed from a previous secondary analysis. Face-to-face discussions resolved coding differences among research team members. Confirmation of findings was sought from practice participants. Practices manifested varying degrees of KM effectiveness through six interdependent processes and multiple overlapping tools. Social tools, such as face-to-face-communication for sharing and developing knowledge, were often more effective than were expensive technical tools such as an electronic medical record. Tool use was tailored for specific outcomes, interacted with each other, and leveraged by other organizational capacities. Practices with effective KM were more open to adopting and sustaining new ways of functioning, ways reflecting attributes of a medical home. Knowledge management differences occur within and between practices and can explain differences in performance. By relying more on social tools rather than costly, high-tech investment, KM leverages primary care's relationship-centered strength, facilitating practice redesign as a medical home.

Effect of high-frequency spectral components in computer recognition of dysarthric speech based on a Mel-cepstral stochastic model.

PubMed

Polur, Prasad D; Miller, Gerald E

2005-01-01

Computer speech recognition of individuals with dysarthria, such as cerebral palsy patients, requires a robust technique that can handle conditions of very high variability and limited training data. In this study, a hidden Markov model (HMM) was constructed and conditions investigated that would provide improved performance for a dysarthric speech (isolated word) recognition system intended to act as an assistive/control tool. In particular, we investigated the effect of high-frequency spectral components on the recognition rate of the system to determine if they contributed useful additional information to the system. A small-size vocabulary spoken by three cerebral palsy subjects was chosen. Mel-frequency cepstral coefficients extracted with the use of 15 ms frames served as training input to an ergodic HMM setup. Subsequent results demonstrated that no significant useful information was available to the system for enhancing its ability to discriminate dysarthric speech above 5.5 kHz in the current set of dysarthric data. The level of variability in input dysarthric speech patterns limits the reliability of the system. However, its application as a rehabilitation/control tool to assist dysarthric motor-impaired individuals such as cerebral palsy subjects holds sufficient promise.

ESCAPE: database for integrating high-content published data collected from human and mouse embryonic stem cells.

PubMed

Xu, Huilei; Baroukh, Caroline; Dannenfelser, Ruth; Chen, Edward Y; Tan, Christopher M; Kou, Yan; Kim, Yujin E; Lemischka, Ihor R; Ma'ayan, Avi

2013-01-01

High content studies that profile mouse and human embryonic stem cells (m/hESCs) using various genome-wide technologies such as transcriptomics and proteomics are constantly being published. However, efforts to integrate such data to obtain a global view of the molecular circuitry in m/hESCs are lagging behind. Here, we present an m/hESC-centered database called Embryonic Stem Cell Atlas from Pluripotency Evidence integrating data from many recent diverse high-throughput studies including chromatin immunoprecipitation followed by deep sequencing, genome-wide inhibitory RNA screens, gene expression microarrays or RNA-seq after knockdown (KD) or overexpression of critical factors, immunoprecipitation followed by mass spectrometry proteomics and phosphoproteomics. The database provides web-based interactive search and visualization tools that can be used to build subnetworks and to identify known and novel regulatory interactions across various regulatory layers. The web-interface also includes tools to predict the effects of combinatorial KDs by additive effects controlled by sliders, or through simulation software implemented in MATLAB. Overall, the Embryonic Stem Cell Atlas from Pluripotency Evidence database is a comprehensive resource for the stem cell systems biology community. Database URL: http://www.maayanlab.net/ESCAPE

A Cost-Effectiveness Tool to Guide the Prioritization of Interventions for Rheumatic Fever and Rheumatic Heart Disease Control in African Nations.

PubMed

Watkins, David; Lubinga, Solomon J; Mayosi, Bongani; Babigumira, Joseph B

2016-08-01

Rheumatic heart disease (RHD) prevalence and mortality rates remain especially high in many parts of Africa. While effective prevention and treatment exist, coverage rates of the various interventions are low. Little is known about the comparative cost-effectiveness of different RHD interventions in limited resource settings. We developed an economic evaluation tool to assist ministries of health in allocating resources and planning RHD control programs. We constructed a Markov model of the natural history of acute rheumatic fever (ARF) and RHD, taking transition probabilities and intervention effectiveness data from previously published studies and expert opinion. Our model estimates the incremental cost-effectiveness of scaling up coverage of primary prevention (PP), secondary prevention (SP) and heart valve surgery (VS) interventions for RHD. We take a healthcare system perspective on costs and measure outcomes as disability-adjusted life-years (DALYs), discounting both at 3%. Univariate and probabilistic sensitivity analyses are also built into the modeling tool. We illustrate the use of this model in a hypothetical low-income African country, drawing on available disease burden and cost data. We found that, in our hypothetical country, PP would be cost saving and SP would be very cost-effective. International referral for VS (e.g., to a country like India that has existing surgical capacity) would be cost-effective, but building in-country VS services would not be cost-effective at typical low-income country thresholds. Our cost-effectiveness analysis tool is designed to inform priorities for ARF/RHD control programs in Africa at the national or subnational level. In contrast to previous literature, our preliminary findings suggest PP could be the most efficient and cheapest approach in poor countries. We provide our model for public use in the form of a Supplementary File. Our research has immediate policy relevance and calls for renewed efforts to scale up RHD prevention.

Comparison of in silico models for prediction of mutagenicity.

PubMed

Bakhtyari, Nazanin G; Raitano, Giuseppa; Benfenati, Emilio; Martin, Todd; Young, Douglas

2013-01-01

Using a dataset with more than 6000 compounds, the performance of eight quantitative structure activity relationships (QSAR) models was evaluated: ACD/Tox Suite, Absorption, Distribution, Metabolism, Elimination, and Toxicity of chemical substances (ADMET) predictor, Derek, Toxicity Estimation Software Tool (T.E.S.T.), TOxicity Prediction by Komputer Assisted Technology (TOPKAT), Toxtree, CEASAR, and SARpy (SAR in python). In general, the results showed a high level of performance. To have a realistic estimate of the predictive ability, the results for chemicals inside and outside the training set for each model were considered. The effect of applicability domain tools (when available) on the prediction accuracy was also evaluated. The predictive tools included QSAR models, knowledge-based systems, and a combination of both methods. Models based on statistical QSAR methods gave better results.

Development of a Real Time Internal Charging Tool for Geosynchronous Orbit

NASA Technical Reports Server (NTRS)

Posey, Nathaniel A.; Minow, Joesph I.

2013-01-01

The high-energy electron fluxes encountered by satellites in geosynchronous orbit pose a serious threat to onboard instrumentation and other circuitry. A substantial build-up of charge within a satellite's insulators can lead to electric fields in excess of the breakdown strength, which can result in destructive electrostatic discharges. The software tool we've developed uses data on the plasma environment taken from NOAA's GOES-13 satellite to track the resulting electric field strength within a material of arbitrary depth and conductivity and allows us to monitor the risk of material failure in real time. The tool also utilizes a transport algorithm to simulate the effects of shielding on the dielectric. Data on the plasma environment and the resulting electric fields are logged to allow for playback at a variable frame rate.

Adhesion Strength of TiN Coatings at Various Ion Etching Deposited on Tool Steels Using Cathodic Arc Pvd Technique

NASA Astrophysics Data System (ADS)

Ali, Mubarak; Hamzah, Esah; Ali, Nouman

Titanium nitride (TiN) widely used as hard coating material was coated on tool steels, namely on high-speed steel (HSS) and D2 tool steel by physical vapor deposition method. The goal of this study was to examine the effect of ion etching with and without titanium (Ti) and chromium (Cr) on the adhesion strength of TiN coatings deposited on tool steels. From the scratch tester, it was observed that by increasing Ti ion etching showed an increase in adhesion strength of the deposited coatings. The coatings deposited with Cr ion etching showed poor adhesion compared with the coatings deposited with Ti ion etching. Scratch test measurements showed that the coating deposited with titanium ion etching for 16 min is the most stable coating and maintained even at the critical load of 66 N. The curve obtained via penetration depth along the scratch trace is linear in the case of HSS, whereas is slightly flexible in the case of D2 tool steel. The coatings deposited on HSS exhibit better adhesion compared with those on D2 tool steel.

Comparative Analysis of NOAA REFM and SNB3GEO Tools for the Forecast of the Fluxes of High-Energy Electrons at GEO

NASA Technical Reports Server (NTRS)

Balikhin, M. A.; Rodriguez, J. V.; Boynton, R. J.; Walker, S. N.; Aryan, Homayon; Sibeck, D. G.; Billings, S. A.

2016-01-01

Reliable forecasts of relativistic electrons at geostationary orbit (GEO) are important for the mitigation of their hazardous effects on spacecraft at GEO. For a number of years the Space Weather Prediction Center at NOAA has provided advanced online forecasts of the fluence of electrons with energy >2 MeV at GEO using the Relativistic Electron Forecast Model (REFM). The REFM forecasts are based on real-time solar wind speed observations at L1. The high reliability of this forecasting tool serves as a benchmark for the assessment of other forecasting tools. Since 2012 the Sheffield SNB3GEO model has been operating online, providing a 24 h ahead forecast of the same fluxes. In addition to solar wind speed, the SNB3GEO forecasts use solar wind density and interplanetary magnetic field B(sub z) observations at L1. The period of joint operation of both of these forecasts has been used to compare their accuracy. Daily averaged measurements of electron fluxes by GOES 13 have been used to estimate the prediction efficiency of both forecasting tools. To assess the reliability of both models to forecast infrequent events of very high fluxes, the Heidke skill score was employed. The results obtained indicate that SNB3GEO provides a more accurate 1 day ahead forecast when compared to REFM. It is shown that the correction methodology utilized by REFM potentially can improve the SNB3GEO forecast.

Environmentally friendly tool to control mosquito populations without risk of insecticide resistance: the Lehmann’s funnel entry trap

PubMed Central

2013-01-01

Background Current malaria control strategies have cut down the malaria burden in many endemic areas, however the emergence and rapid spread of insecticide and drug resistance undermine the success of these efforts. There is growing concern that malaria eradication will not be achieved without the introduction of novel control tools. One approach that has been developed in the last few years is based on house screening to reduce indoor mosquito vector densities and consequently decrease malaria transmission. Here screening and trapping were combined in one tool to control mosquito populations. The trap does not require an insecticide or even an attractant, yet it effectively collects incoming resistant and susceptible mosquitoes and kills them. Results Performance of the funnel entry trap was tested in low and high malaria vector density areas. An overall reduction of 70 to 80% of mosquito density was seen in both. Species and molecular forms of Anopheles gambiae identification indicated no variation in the number of Anopheles arabiensis and the molecular forms of An. gambiae between houses and traps. Mosquitoes collected in the traps and in houses were highly resistant to pyrethroids (0.9 kdr-based mechanism). Conclusion There is a global consensus that new intervention tools are needed to cross the last miles in malaria elimination/eradication. The funnel entry trap showed excellent promise in suppressing mosquito densities even in area of high insecticide resistance. It requires no chemicals and is self-operated. PMID:23758904

Comparative analysis of NOAA REFM and SNB3GEO tools for the forecast of the fluxes of high-energy electrons at GEO.

PubMed

Balikhin, M A; Rodriguez, J V; Boynton, R J; Walker, S N; Aryan, H; Sibeck, D G; Billings, S A

2016-01-01

Reliable forecasts of relativistic electrons at geostationary orbit (GEO) are important for the mitigation of their hazardous effects on spacecraft at GEO. For a number of years the Space Weather Prediction Center at NOAA has provided advanced online forecasts of the fluence of electrons with energy >2 MeV at GEO using the Relativistic Electron Forecast Model (REFM). The REFM forecasts are based on real-time solar wind speed observations at L1. The high reliability of this forecasting tool serves as a benchmark for the assessment of other forecasting tools. Since 2012 the Sheffield SNB 3 GEO model has been operating online, providing a 24 h ahead forecast of the same fluxes. In addition to solar wind speed, the SNB 3 GEO forecasts use solar wind density and interplanetary magnetic field B z observations at L1.The period of joint operation of both of these forecasts has been used to compare their accuracy. Daily averaged measurements of electron fluxes by GOES 13 have been used to estimate the prediction efficiency of both forecasting tools. To assess the reliability of both models to forecast infrequent events of very high fluxes, the Heidke skill score was employed. The results obtained indicate that SNB 3 GEO provides a more accurate 1 day ahead forecast when compared to REFM. It is shown that the correction methodology utilized by REFM potentially can improve the SNB 3 GEO forecast.

The Takei Handheld Dynamometer: An Effective Clinical Outcome Measure Tool for Hand and Wrist Function in Boxing.

PubMed

Gatt, Ian; Smith-Moore, Sophie; Steggles, Charlie; Loosemore, Mike

2018-05-01

The aim of this article was to explore retrospectively the Takei dynamometer as a valid and reliable outcome measure tool for hand and wrist pathology in the Great Britain amateur boxing squad between 2010 and 2014. Longitudinal retrospective injury surveillance of the Great Britain boxing squad was performed from 2010 to 2014. The location, region affected, description, and duration of each injury were recorded by the team doctor and team physiotherapists. For each significant injury, we recorded hand grip scores using the Takei handheld dynamometer and compared the scores with baseline measures. At the hand, fractures and dislocations were highly detected with an average difference of 40.2% ( P < .05) when comparing postinjury to baseline measures. At the wrist, carpometacarpal and carpal joint injuries were highly detected with an average difference of 32.6% ( P < .05). Other injuries provided varied results. In the absence of pathology, up to 15% difference between left and right scores can be considered normal with a predominance observed below 10%. A difference of 20% can be indicative of a form of pathology, although pathologies can also be present with lower difference or no apparent changes. A difference of >20% should be highly considered for significant pathology. The Takei dynamometer is a valid and reliable outcome measure tool for hand and wrist pathologies in boxing. Our study highlights the importance of appropriate clinical tools to guide injury management in this sport.

Functional Analysis of OMICs Data and Small Molecule Compounds in an Integrated "Knowledge-Based" Platform.

PubMed

Dubovenko, Alexey; Nikolsky, Yuri; Rakhmatulin, Eugene; Nikolskaya, Tatiana

2017-01-01

Analysis of NGS and other sequencing data, gene variants, gene expression, proteomics, and other high-throughput (OMICs) data is challenging because of its biological complexity and high level of technical and biological noise. One way to deal with both problems is to perform analysis with a high fidelity annotated knowledgebase of protein interactions, pathways, and functional ontologies. This knowledgebase has to be structured in a computer-readable format and must include software tools for managing experimental data, analysis, and reporting. Here, we present MetaCore™ and Key Pathway Advisor (KPA), an integrated platform for functional data analysis. On the content side, MetaCore and KPA encompass a comprehensive database of molecular interactions of different types, pathways, network models, and ten functional ontologies covering human, mouse, and rat genes. The analytical toolkit includes tools for gene/protein list enrichment analysis, statistical "interactome" tool for the identification of over- and under-connected proteins in the dataset, and a biological network analysis module made up of network generation algorithms and filters. The suite also features Advanced Search, an application for combinatorial search of the database content, as well as a Java-based tool called Pathway Map Creator for drawing and editing custom pathway maps. Applications of MetaCore and KPA include molecular mode of action of disease research, identification of potential biomarkers and drug targets, pathway hypothesis generation, analysis of biological effects for novel small molecule compounds and clinical applications (analysis of large cohorts of patients, and translational and personalized medicine).

A simple, rapid, high-fidelity and cost-effective PCR-based two-step DNA synthesis method for long gene sequences.

PubMed

Xiong, Ai-Sheng; Yao, Quan-Hong; Peng, Ri-He; Li, Xian; Fan, Hui-Qin; Cheng, Zong-Ming; Li, Yi

2004-07-07

Chemical synthesis of DNA sequences provides a powerful tool for modifying genes and for studying gene function, structure and expression. Here, we report a simple, high-fidelity and cost-effective PCR-based two-step DNA synthesis (PTDS) method for synthesis of long segments of DNA. The method involves two steps. (i) Synthesis of individual fragments of the DNA of interest: ten to twelve 60mer oligonucleotides with 20 bp overlap are mixed and a PCR reaction is carried out with high-fidelity DNA polymerase Pfu to produce DNA fragments that are approximately 500 bp in length. (ii) Synthesis of the entire sequence of the DNA of interest: five to ten PCR products from the first step are combined and used as the template for a second PCR reaction using high-fidelity DNA polymerase pyrobest, with the two outermost oligonucleotides as primers. Compared with the previously published methods, the PTDS method is rapid (5-7 days) and suitable for synthesizing long segments of DNA (5-6 kb) with high G + C contents, repetitive sequences or complex secondary structures. Thus, the PTDS method provides an alternative tool for synthesizing and assembling long genes with complex structures. Using the newly developed PTDS method, we have successfully obtained several genes of interest with sizes ranging from 1.0 to 5.4 kb.

Contamination-Free Manufacturing: Tool Component Qualification, Verification and Correlation with Wafers

NASA Astrophysics Data System (ADS)

Tan, Samantha H.; Chen, Ning; Liu, Shi; Wang, Kefei

2003-09-01

As part of the semiconductor industry "contamination-free manufacturing" effort, significant emphasis has been placed on reducing potential sources of contamination from process equipment and process equipment components. Process tools contain process chambers and components that are exposed to the process environment or process chemistry and in some cases are in direct contact with production wafers. Any contamination from these sources must be controlled or eliminated in order to maintain high process yields, device performance, and device reliability. This paper discusses new nondestructive analytical methods for quantitative measurement of the cleanliness of metal, quartz, polysilicon and ceramic components that are used in process equipment tools. The goal of these new procedures is to measure the effectiveness of cleaning procedures and to verify whether a tool component part is sufficiently clean for installation and subsequent routine use in the manufacturing line. These procedures provide a reliable "qualification method" for tool component certification and also provide a routine quality control method for reliable operation of cleaning facilities. Cost advantages to wafer manufacturing include higher yields due to improved process cleanliness and elimination of yield loss and downtime resulting from the installation of "bad" components in process tools. We also discuss a representative example of wafer contamination having been linked to a specific process tool component.

Opportunities for adaptive online collaboration to enhance rural land management.

PubMed

Baumber, Alex; Metternicht, Graciela; Ampt, Peter; Cross, Rebecca; Berry, Emily

2018-08-01

Cross-property cooperation has the potential to enhance the effectiveness of environmental management actions that cut across property boundaries. Online tools can facilitate this and overcome barriers to landholder engagement in collaborative management. However, collaborative online tools need to be designed and tailored to users' needs and values, and landholder participation in the development process is critical to ensuring uptake and long-term use. This article presents a case study from the Central Tablelands region of New South Wales, Australia, where landholders have been involved in participatory development of a new online collaboration tool. The case study results highlight the significance of issues such as internet access, privacy, technical proficiency and differing stakeholder objectives. A landholder survey identified mapping and the uploading of monitoring data as important functions for the online tool, but these were not rated as highly as functions relating to data security, sharing settings and key term searches. Consequently, we recommend that a future online collaboration tool for the region is not framed specifically as a mapping or citizen science tool, but rather as an adaptive collaboration and communication tool that can incorporate a variety of data types and formats and be modified over time in line with changing landholder needs. Copyright © 2018 Elsevier Ltd. All rights reserved.

Advances in management of low-risk febrile neutropenia.

PubMed

Teuffel, Oliver; Sung, Lillian

2012-02-01

To describe and discuss the most recent advances in the management of low-risk febrile neutropenia in children with cancer. Several risk stratification tools for children with febrile neutropenia have been developed, although none of these tools have been directly compared and few have been validated in independent populations. However, there is good evidence that, for pediatric patients with febrile neutropenia at low risk for severe infection, outpatient management is a well tolerated and efficacious alternative to inpatient care. Moreover, major progress has been made in obtaining and understanding perceived quality of life and preferences for outpatient management in pediatric cancer patients. Many parents prefer inpatient management although child quality of life is, in general, anticipated to be higher with outpatient intravenous therapy. Finally, outpatient strategies are more cost-effective as compared with traditional management in hospital. Outpatient management is a well tolerated and cost-effective strategy for low-risk febrile neutropenia in children with cancer, although parental preferences are highly variable for outpatient versus inpatient management. Future research should examine the effectiveness of outpatient strategies through conduct of large cohort studies. Other future work could focus on development of decision aids and other tools to facilitate ambulatory approaches.

Gene action analysis by inheritance and QTL mapping of resistance to root-knot nematodes in cotton.

USDA-ARS?s Scientific Manuscript database

Host-plant resistance is highly effective in controlling crop loss from nematode infection. In addition, molecular markers can be powerful tools for marker-assisted selection (MAS), where they reduce laborious greenhouse phenotype evaluation to identify root-knot nematode (RKN) Meloidogyne incognita...

On-site evaluation of commercial-scale hybrid catfish production using cryopreserved blue catfish sperm

USDA-ARS?s Scientific Manuscript database

Cryopreservation is an effective tool for conservation of genetic resources and is becoming increasingly used worldwide with aquatic species. Broadening the application of this technology to a commercial scale through high-throughput approaches has become essential for use with aquatic species. This...

A Simple Mechanical Model for the Isotropic Harmonic Oscillator

ERIC Educational Resources Information Center

Nita, Gelu M.

2010-01-01

A constrained elastic pendulum is proposed as a simple mechanical model for the isotropic harmonic oscillator. The conceptual and mathematical simplicity of this model recommends it as an effective pedagogical tool in teaching basic physics concepts at advanced high school and introductory undergraduate course levels. (Contains 2 figures.)

A Developmental Inventory of Sources of Stress.

ERIC Educational Resources Information Center

Higbee, Jeanne L.; Dwinell, Patricia L.

The Developmental Inventory of Sources of Stress (DISS) is an instructional tool designed to assist counselors, advisors, and faculty in reducing stress among college students (specifically, high risk college freshmen, although it can be utilized effectively with any college student population). The instrument focuses on sources of stress over…

Just Tell Me Is It Thick or Thin?

ERIC Educational Resources Information Center

Runte, Jane; And Others

1994-01-01

Discusses movie "How I Got into College," satire of college admission process and highly effective counseling tool. Describes three college counseling programs using the film in senior family workshop, junior guidance group, and senior counseling group. Presents guidelines to develop program using the film to help students and parents reduce…

An individual-based modeling approach to simulating recreation use in wilderness settings

Treesearch

Randy Gimblett; Terry Daniel; Michael J. Meitner

2000-01-01

Landscapes protect biological diversity and provide unique opportunities for human-nature interactions. Too often, these desirable settings suffer from extremely high visitation. Given the complexity of social, environmental and economic interactions, resource managers need tools that provide insights into the cause and effect relationships between management actions...

Randomized Control Trials on the Dynamic Geometry Approach

ERIC Educational Resources Information Center

Jiang, Zhonghong; White, Alexander; Rosenwasser, Alana

2011-01-01

The project reported here is conducting repeated randomized control trials of an approach to high school geometry that utilizes Dynamic Geometry (DG) software to supplement ordinary instructional practices. It compares effects of that intervention with standard instruction that does not make use of computer drawing/exploration tools. The basic…

Challenges of Conducting Systematic Research in Australia's Northern Territory

ERIC Educational Resources Information Center

Helmer, Janet; Harper, Helen; Lea, Tess; Wolgemuth, Jennifer R.; Chalkiti, Kalotina

2014-01-01

This paper explores the challenges of conducting systematic research, using our experiences of conducting a study to evaluate the effectiveness of ABRACADABRA, an online tool for early childhood literacy instruction as the contextual framework. By discussing how the research team resolved such perennial issues as high teacher turnover, low or…

Web Page Design in Distance Education

ERIC Educational Resources Information Center

Isman, Aytekin; Dabaj, Fahme; Gumus, Agah; Altinay, Fahriye; Altinay, Zehra

2004-01-01

Distance education is contemporary process of the education. It facilitates fast, easy delivery of information with its concrete hardware and software tools. The development of high technology, internet and web-design delivering become impact of effective using as delivery system to the students. Within the global perspective, even the all work…

Web Page Design in Distance Education

ERIC Educational Resources Information Center

Isman, Aytekin; Dabaj, Fahme; Gumus, Agah; Altinay, Fahriye; Altinay, Zehra

2004-01-01

Distance education is contemporary process of the education. It facilitates fast, easy delivery of information with its concrete hardware and software tools. The development of high technology, Internet and web-design delivering become impact of effective using as delivery system to the students. Within the global perspective, even the all work…

Useful Expressions for Implementing Cooperative Learning in English

ERIC Educational Resources Information Center

Asakawa, Machiko; Kanamaru, Ayako; Plaza, Taron; Shiramizu, Chie

2016-01-01

With the Ministry of Education, Sports, Science and Technology calling for junior and senior high school English classes in Japan to be more communicative and taught in English, teachers need effective tools to help make their classrooms more interactive. Cooperative learning activities have the potential to increase interaction among students and…

Plants. Ag Ed Environmental Education Series.

ERIC Educational Resources Information Center

Tulloch, Rodney W.

Designed to serve as a resource tool in a high school vocational agriculture curriculum dealing with the environment as it relates to agriculture, this unit is concerned with plants. Plants are defined and their characteristics described. A section on the effects of environment on higher plants covers temperature, light, water, nutrients, air,…

To Block-Schedule or Not?

ERIC Educational Resources Information Center

Mowen, Gregg G.; Mowen, Carol

2004-01-01

In this article, the authors discuss the advantages of block scheduling and how it can be an effective educational tool when faced with educational challenges. Block schedules can ease the transition from the homelike atmosphere of the elementary school to the departmentalized environment of the high school by reducing the need for constant class…

Developing the Biological Condition Gradient (BCG), as a Tool for Describing the Condition of US Coral Reefs

EPA Science Inventory

Understanding effects of human activity on coral reefs requires knowing what characteristics constitute a high quality coral reef and identifying measurable criteria. The BCG is a conceptual model that describes how biological attributes of coral reefs change along a gradient of ...

Advances in EPG for Treatment and Research: An Illustrative Case Study

ERIC Educational Resources Information Center

Scobbie, James M.; Wood, Sara E.; Wrench, Alan A.

2004-01-01

Electropalatography (EPG), a technique which reveals tongue-palate contact patterns over time, is a highly effective tool for speech research. We report here on recent developments by Articulate Instruments Ltd. These include hardware for Windows-based computers, backwardly compatible (with Reading EPG3) software systems for clinical intervention…

Study of high altitude plume impingement

NASA Technical Reports Server (NTRS)

Wojciechowski, C. J.; Penny, M. M.; Prozan, R. J.; Seymour, D.; Greenwood, T. F.

1972-01-01

Computer program has been developed as analytical tool to predict severity of effects of exhaust of rocket engines on adjacent spacecraft surfaces. Program computes forces, moments, pressures, and heating rates on surfaces immersed in or subjected to exhaust plume environments. Predictions will be useful in design of systems where such problems are anticipated.

In Praise of Assessment (Done Right)

ERIC Educational Resources Information Center

Marshall, Kim

2018-01-01

High-stakes testing gets a lot of criticism, for good reason. But, when done right, assessment can be a valuable tool for educators and students. Kim Marshall describes how different types of assessments can improve learning by revealing learning problems in real time, improving student retention through the "retrieval effect," and…

Tools For Evaluating The Benefits Of Green Infrastructure For Urban Water Management: Informational Brief (WERF Report INFR5SG09b)

EPA Science Inventory

This report identifies the practical challenges for evaluating the benefits of green infrastructure. It also discusses a more systematic approach to integrate cost-effective, high-performance urban water infrastructure practices with other environmental, social, and economic goa...

Evaluating the suitability of the Soil Vulnerability Index (SVI) classification scheme using the SWAT model

USDA-ARS?s Scientific Manuscript database

Conservation practices are effective ways to mitigate non-point source pollution, especially when implemented on critical source areas (CSAs) known to be the areas contributing disproportionately to high pollution loads. Although hydrologic models are promising tools to identify CSAs within agricul...

High-precision micro/nano-scale machining system

DOEpatents

Kapoor, Shiv G.; Bourne, Keith Allen; DeVor, Richard E.

2014-08-19

A high precision micro/nanoscale machining system. A multi-axis movement machine provides relative movement along multiple axes between a workpiece and a tool holder. A cutting tool is disposed on a flexible cantilever held by the tool holder, the tool holder being movable to provide at least two of the axes to set the angle and distance of the cutting tool relative to the workpiece. A feedback control system uses measurement of deflection of the cantilever during cutting to maintain a desired cantilever deflection and hence a desired load on the cutting tool.

Is It Possible to Increase the Clinical Effectiveness of the Fracture Risk Assessment Tool in Osteopenia Patients by Taking Into Account Bone Mineral Density Values?

PubMed

Park, Jin-Sung; Lee, Jaewon; Park, Ye-Soo

2016-01-01

The study aimed to investigate the effectiveness of the clinical use of the Fracture Risk Assessment Tool (FRAX(®)) developed by the World Health Organization identifying patients at risk of osteoporotic fracture and to evaluate changes in osteoporotic fracture risk prediction according to bone mineral density (BMD) values. We identified the occurrence of osteoporotic fracture among patients whose BMD was measured in our hospital between April 2003 and March 2013. We then analyzed FRAX(®) scores obtained with or without BMD on the day before the occurrence of an osteoporotic fracture in actual osteoporotic fracture patients. According to the National Osteoporosis Foundation high-risk criteria, we identified the percentage of high-risk patients before the actual fracture. Among 445 osteoporotic fracture patients, when FRAX(®)-BMD was used, 281 patients (63%) were identified as high-risk before an actual osteoporotic fracture, and when FRAX(®) without BMD was used, 258 patients (58%) were identified (p = 0.115). In the 84 osteopenia patients, 39 patients (46.4%) were identified as high-risk when FRAX(®) without BMD was used, and 19 patients (22.6%) were identified when FRAX(®)-BMD was used (p = 0.001). The use of BMD in FRAX(®) does not seem to increase the clinical effectiveness of predicting osteoporotic fracture in osteopenia patients. Copyright © 2016 International Society for Clinical Densitometry. Published by Elsevier Inc. All rights reserved.

Development of assessment tools to measure organizational support for employee health.

PubMed

Golaszewski, Thomas; Barr, Donald; Pronk, Nico

2003-01-01

To develop systems that measure and effect organizational support for employee health. Multiple studies and developmental projects were reviewed that show the process of instrument development, metric quality testing, utilization within intervention studies, and prediction modeling efforts. Demographic patterns indicate high support levels and relationships of subsections to various employee health risks. Successes with the initial version have given rise to 2 additional evaluation tools. The availability of these systems illustrates how ecological models can be practically applied. Such efforts contribute to the paradigm shift in worksite health promotion that focuses on the organization as the target of intervention.

Mental health nurses' views about antipsychotic medication side effects.

PubMed

Stomski, N J; Morrison, P; Meehan, T

2016-08-01

WHAT IS KNOWN ON THE SUBJECT?: The only previous quantitative study that examined nurses' use of assessment tools to identify antipsychotic medication side effects found that about 25% of mental health nurses were using assessment tools. No previous studies have examined factors that influence the manner in which mental health nurses assess antipsychotic medication side effects. WHAT THIS PAPER ADDS TO EXISTING KNOWLEDGE?: One-third of the respondents were not aware of any antipsychotic medication side-effect assessment tool, and only one-quarter were currently using an assessment tool. 'Service responsibility' was significantly associated with ongoing use of antipsychotic medication assessment tools, indicating that respondents with more positive attitudes to their service were more likely to continue using antipsychotic medication assessment tools. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: The low level of awareness and use of antipsychotic medication side-effect assessment tools indicates that nursing educational institutions should incorporate more detail about these tools in course content, and emphasize in particular the benefits that result from the use of these tools in clinical practice. Service processes contributed significantly to the use of antipsychotic medication assessment tools, which indicates that managers need to foster workplace cultures that promote routine use of these tools. Introduction Limited evidence suggests that only a minority of mental health nurses regularly use standardized assessment tools to assess antipsychotic medication side effects, but the factors that contribute to the non-routine use of these tools remain unknown. Aim To examine Australian mental health nurses' awareness of, and attitudes towards, side-effect assessment tools, and also identify factors the influence the use of these tools. Methods A cross-sectional survey was undertaken through distributing an online questionnaire via email to members of the Australian College of Mental Health Nurses. Completed questionnaires were received from 171 respondents. Linear regression was used to examine the relationship between the 'service responsibility' and 'personal confidence' scale scores, and awareness, previous use and ongoing use of antipsychotic medication assessment tools. Results Only one-quarter of the respondents (26.5%) were currently using an assessment tool. 'Service responsibility' was significantly associated with ongoing use of antipsychotic medication assessment tools (Β = 3.26; 95% CI 0.83-5.69). 'Personal confidence' did not influence the ongoing use of assessment tools (Β = -0.05; 95% CI -1.06-1.50). Implications for clinical practice Stakeholders can incorporate 'service responsibility' processes to foster increased use of assessment tools, which may enhance the identification antipsychotic medication side effects and improve the quality of care for service users. © 2016 John Wiley & Sons Ltd.

3D Displays And User Interface Design For A Radiation Therapy Treatment Planning CAD Tool

NASA Astrophysics Data System (ADS)

Mosher, Charles E.; Sherouse, George W.; Chaney, Edward L.; Rosenman, Julian G.

1988-06-01

The long term goal of the project described in this paper is to improve local tumor control through the use of computer-aided treatment design methods that can result in selection of better treatment plans compared with conventional planning methods. To this end, a CAD tool for the design of radiation treatment beams is described. Crucial to the effectiveness of this tool are high quality 3D display techniques. We have found that 2D and 3D display methods dramatically improve the comprehension of the complex spatial relationships between patient anatomy, radiation beams, and dose distributions. In order to take full advantage of these displays, an intuitive and highly interactive user interface was created. If the system is to be used by physicians unfamiliar with computer systems, it is essential that a user interface is incorporated that allows the user to navigate through each step of the design process in a manner similar to what they are used to. Compared with conventional systems, we believe our display and CAD tools will allow the radiotherapist to achieve more accurate beam targetting leading to a better radiation dose configuration to the tumor volume. This would result in a reduction of the dose to normal tissue.

Path planning and parameter optimization of uniform removal in active feed polishing

NASA Astrophysics Data System (ADS)

Liu, Jian; Wang, Shaozhi; Zhang, Chunlei; Zhang, Linghua; Chen, Huanan

2015-06-01

A high-quality ultrasmooth surface is demanded in short-wave optical systems. However, the existing polishing methods have difficulties meeting the requirement on spherical or aspheric surfaces. As a new kind of small tool polishing method, active feed polishing (AFP) could attain a surface roughness of less than 0.3 nm (RMS) on spherical elements, although AFP may magnify the residual figure error or mid-frequency error. The purpose of this work is to propose an effective algorithm to realize uniform removal of the surface in the processing. At first, the principle of the AFP and the mechanism of the polishing machine are introduced. In order to maintain the processed figure error, a variable pitch spiral path planning algorithm and the dwell time-solving model are proposed. For suppressing the possible mid-frequency error, the uniformity of the synthesis tool path, which is generated by an arbitrary point at the polishing tool bottom, is analyzed and evaluated, and the angular velocity ratio of the tool spinning motion to the revolution motion is optimized. Finally, an experiment is conducted on a convex spherical surface and an ultrasmooth surface is finally acquired. In conclusion, a high-quality ultrasmooth surface can be successfully obtained with little degradation of the figure and mid-frequency errors by the algorithm.

The Use of Computer Tools in the Design Process of Students’ Architectural Projects. Case Studies in Algeria

NASA Astrophysics Data System (ADS)

Saighi, Ouafa; Salah Zerouala, Mohamed

2017-12-01

This The paper particularly deals with the way in which computer tools are used by students in their design studio’s projects. Four institutions of architecture education in Algeria are considered as a case study to evaluate the impact of such tools on student design process. This aims to inspect in depth such use, to sort out its advantages and shortcomings in order to suggest some solutions. A field survey was undertaken on a sample of students and their teachers at the same institutions. The analysed results mainly show that computer tools are highly focusing on improving the quality of drawings representation and images seeking observers’ satisfaction hence influencing their decision. Some teachers are not very keen to overuse the computer during the design phase; they prefer the “traditional” approach. This is the present situation that Algerian university is facing which leads to conflict and disagreement between students and teachers. Meanwhile, there was no doubt that computer tools have effectively contributed to improve the competitive level among students.

Evaluation of a simple method for the automatic assignment of MeSH descriptors to health resources in a French online catalogue.

PubMed

Névéol, Aurélie; Pereira, Suzanne; Kerdelhué, Gaetan; Dahamna, Badisse; Joubert, Michel; Darmoni, Stéfan J

2007-01-01

The growing number of resources to be indexed in the catalogue of online health resources in French (CISMeF) calls for curating strategies involving automatic indexing tools while maintaining the catalogue's high indexing quality standards. To develop a simple automatic tool that retrieves MeSH descriptors from documents titles. In parallel to research on advanced indexing methods, a bag-of-words tool was developed for timely inclusion in CISMeF's maintenance system. An evaluation was carried out on a corpus of 99 documents. The indexing sets retrieved by the automatic tool were compared to manual indexing based on the title and on the full text of resources. 58% of the major main headings were retrieved by the bag-of-words algorithm and the precision on main heading retrieval was 69%. Bag-of-words indexing has effectively been used on selected resources to be included in CISMeF since August 2006. Meanwhile, on going work aims at improving the current version of the tool.

MyAgRecord: An Online Career Portfolio Management Tool for High School Students Conducting Supervised Agricultural Experience Programs.

ERIC Educational Resources Information Center

Emis, Larry; Dillingham, John

Texas's online career portfolio management tool for high school students participating in supervised agricultural experience programs (SAEPs) was developed in 1998 by a committee of Texas high school teachers of agriscience and Texas Education Agency personnel. The career portfolio management tool reflects General Accepted Accounting Principles…

Biocontrol of fouling pests: Effect of diversity, identity and density of control agents.

PubMed

Atalah, Javier; Newcombe, Emma M; Zaiko, Anastasija

2016-04-01

Augmentative biocontrol, using native natural enemies, has been suggested as a promising tool to control marine biofouling pests on artificial structures. However, there are still important knowledge gaps to be addressed before biocontrol can be considered as a management tool. In a field experiment on floating marine structures we examined intra- and interspecific consumer interactions among biocontrol agents on different surface orientations. We tested the effect of identity, density and diversity of three invertebrates (the 11-arm seastar Coscinasterias muricata, the sea urchin Evechinus chloroticus and the gastropod Cook's turban Cookia sulcata) to reduce established biofouling and to prevent fouling growth on defouled surfaces. High densities of biocontrol agents were not more effective at fouling control (cover and biomass) than low densities. Nor did multi-species treatments function more effectively than mono-specific ones. However, biocontrol agent identity was important, with the 11-arm seastar and Cook's turban being the most effective at fouling reduction and prevention, respectively. Surface orientation had a strong effect on the effectiveness of control agents, with the best results obtained on vertical compared to diagonal and underside surfaces. This study confirmed the potential of biocontrol as a management tool for marine pest, indicating that identity is more important than richness and density of control agents. It also highlighted the limitations of this approach on diagonal and underside surfaces, where control agents have limited retention ability. Copyright © 2016 Elsevier Ltd. All rights reserved.

Cancer nanomedicine: gold nanoparticle mediated combined cancer therapy

NASA Astrophysics Data System (ADS)

Yang, C.; Bromma, Kyle; Chithrani, B. D.

2018-02-01

Recent developments in nanotechnology has provided new tools for cancer therapy and diagnosis. Among other nanomaterial systems, gold nanoparticles are being used as radiation dose enhancers and anticancer drug carriers in cancer therapy. Fate of gold nanoparticles within biological tissues can be probed using techniques such as TEM (transmission electron microscopy) and SEM (Scanning Electron Microscopy) due to their high electron density. We have shown for the first time that cancer drug loaded gold nanoparticles can reach the nucleus (or the brain) of cancer cells enhancing the therapeutic effect dramatically. Nucleus of the cancer cells are the most desirable target in cancer therapy. In chemotherapy, smart delivery of highly toxic anticancer drugs through packaging using nanoparticles will reduce the side effects and improve the quality and care of cancer patients. In radiation therapy, use of gold nanoparticles as radiation dose enhancer is very promising due to enhanced localized dose within the cancer tissue. Recent advancement in nanomaterial characterization techniques will facilitate mapping of nanomaterial distribution within biological specimens to correlate the radiobiological effects due to treatment. Hence, gold nanoparticle mediated combined chemoradiation would provide promising tools to achieve personalized and tailored cancer treatments in the near future.

Health effects of outdoor air pollution

PubMed Central

Abelsohn, Alan; Stieb, Dave M.

2011-01-01

Abstract Objective To inform family physicians about the health effects of air pollution and to provide an approach to counseling vulnerable patients in order to reduce exposure. Sources of information MEDLINE was searched using terms relevant to air pollution and its adverse effects. We reviewed English-language articles published from January 2008 to December 2009. Most studies provided level II evidence. Main message Outdoor air pollution causes substantial morbidity and mortality in Canada. It can affect both the respiratory system (exacerbating asthma and chronic obstructive pulmonary disease) and the cardiovascular system (triggering arrhythmias, cardiac failure, and stroke). The Air Quality Health Index (AQHI) is a new communication tool developed by Health Canada and Environment Canada that indicates the level of health risk from air pollution on a scale of 1 to 10. The AQHI is widely reported in the media, and the tool might be of use to family physicians in counseling high-risk patients (such as those with asthma, chronic obstructive pulmonary disease, or cardiac failure) to reduce exposure to outdoor air pollution. Conclusion Family physicians can use the AQHI and its health messages to teach patients with asthma and other high-risk patients how to reduce health risks from air pollution. PMID:21841106

High speed imaging - An important industrial tool

NASA Technical Reports Server (NTRS)

Moore, Alton; Pinelli, Thomas E.

1986-01-01

High-speed photography, which is a rapid sequence of photographs that allow an event to be analyzed through the stoppage of motion or the production of slow-motion effects, is examined. In high-speed photography 16, 35, and 70 mm film and framing rates between 64-12,000 frames per second are utilized to measure such factors as angles, velocities, failure points, and deflections. The use of dual timing lamps in high-speed photography and the difficulties encountered with exposure and programming the camera and event are discussed. The application of video cameras to the recording of high-speed events is described.

Failure mode and effects analysis drastically reduced potential risks in clinical trial conduct

PubMed Central

Baik, Jungmi; Kim, Hyunjung; Kim, Rachel

2017-01-01

Background Failure mode and effects analysis (FMEA) is a risk management tool to proactively identify and assess the causes and effects of potential failures in a system, thereby preventing them from happening. The objective of this study was to evaluate effectiveness of FMEA applied to an academic clinical trial center in a tertiary care setting. Methods A multidisciplinary FMEA focus group at the Seoul National University Hospital Clinical Trials Center selected 6 core clinical trial processes, for which potential failure modes were identified and their risk priority number (RPN) was assessed. Remedial action plans for high-risk failure modes (RPN >160) were devised and a follow-up RPN scoring was conducted a year later. Results A total of 114 failure modes were identified with an RPN score ranging 3–378, which was mainly driven by the severity score. Fourteen failure modes were of high risk, 11 of which were addressed by remedial actions. Rescoring showed a dramatic improvement attributed to reduction in the occurrence and detection scores by >3 and >2 points, respectively. Conclusions FMEA is a powerful tool to improve quality in clinical trials. The Seoul National University Hospital Clinical Trials Center is expanding its FMEA capability to other core clinical trial processes. PMID:29089745

CNV detection method optimized for high-resolution arrayCGH by normality test.

PubMed

Ahn, Jaegyoon; Yoon, Youngmi; Park, Chihyun; Park, Sanghyun

2012-04-01

High-resolution arrayCGH platform makes it possible to detect small gains and losses which previously could not be measured. However, current CNV detection tools fitted to early low-resolution data are not applicable to larger high-resolution data. When CNV detection tools are applied to high-resolution data, they suffer from high false-positives, which increases validation cost. Existing CNV detection tools also require optimal parameter values. In most cases, obtaining these values is a difficult task. This study developed a CNV detection algorithm that is optimized for high-resolution arrayCGH data. This tool operates up to 1500 times faster than existing tools on a high-resolution arrayCGH of whole human chromosomes which has 42 million probes whose average length is 50 bases, while preserving false positive/negative rates. The algorithm also uses a normality test, thereby removing the need for optimal parameters. To our knowledge, this is the first formulation for CNV detecting problems that results in a near-linear empirical overall complexity for real high-resolution data. Copyright © 2012 Elsevier Ltd. All rights reserved.

CRISPR guide RNA design for research applications.

PubMed

Mohr, Stephanie E; Hu, Yanhui; Ewen-Campen, Benjamin; Housden, Benjamin E; Viswanatha, Raghuvir; Perrimon, Norbert

2016-09-01

The rapid rise of CRISPR as a technology for genome engineering and related research applications has created a need for algorithms and associated online tools that facilitate design of on-target and effective guide RNAs (gRNAs). Here, we review the state of the art in CRISPR gRNA design for research applications of the CRISPR-Cas9 system, including knockout, activation, and inhibition. Notably, achieving good gRNA design is not solely dependent on innovations in CRISPR technology. Good design and design tools also rely on availability of high-quality genome sequence and gene annotations, as well as on availability of accumulated data regarding off-targets and effectiveness metrics. © 2016 The Authors. The FEBS Journal published by John Wiley & Sons Ltd on behalf of Federation of European Biochemical Societies.

Development and validation of a tool to evaluate the quality of medical education websites in pathology.

PubMed

Alyusuf, Raja H; Prasad, Kameshwar; Abdel Satir, Ali M; Abalkhail, Ali A; Arora, Roopa K

2013-01-01

The exponential use of the internet as a learning resource coupled with varied quality of many websites, lead to a need to identify suitable websites for teaching purposes. The aim of this study is to develop and to validate a tool, which evaluates the quality of undergraduate medical educational websites; and apply it to the field of pathology. A tool was devised through several steps of item generation, reduction, weightage, pilot testing, post-pilot modification of the tool and validating the tool. Tool validation included measurement of inter-observer reliability; and generation of criterion related, construct related and content related validity. The validated tool was subsequently tested by applying it to a population of pathology websites. Reliability testing showed a high internal consistency reliability (Cronbach's alpha = 0.92), high inter-observer reliability (Pearson's correlation r = 0.88), intraclass correlation coefficient = 0.85 and κ =0.75. It showed high criterion related, construct related and content related validity. The tool showed moderately high concordance with the gold standard (κ =0.61); 92.2% sensitivity, 67.8% specificity, 75.6% positive predictive value and 88.9% negative predictive value. The validated tool was applied to 278 websites; 29.9% were rated as recommended, 41.0% as recommended with caution and 29.1% as not recommended. A systematic tool was devised to evaluate the quality of websites for medical educational purposes. The tool was shown to yield reliable and valid inferences through its application to pathology websites.

High resolution modelling of extreme precipitation events in urban areas

NASA Astrophysics Data System (ADS)

Siemerink, Martijn; Volp, Nicolette; Schuurmans, Wytze; Deckers, Dave

2015-04-01

The present day society needs to adjust to the effects of climate change. More extreme weather conditions are expected, which can lead to longer periods of drought, but also to more extreme precipitation events. Urban water systems are not designed for such extreme events. Most sewer systems are not able to drain the excessive storm water, causing urban flooding. This leads to high economic damage. In order to take appropriate measures against extreme urban storms, detailed knowledge about the behaviour of the urban water system above and below the streets is required. To investigate the behaviour of urban water systems during extreme precipitation events new assessment tools are necessary. These tools should provide a detailed and integral description of the flow in the full domain of overland runoff, sewer flow, surface water flow and groundwater flow. We developed a new assessment tool, called 3Di, which provides detailed insight in the urban water system. This tool is based on a new numerical methodology that can accurately deal with the interaction between overland runoff, sewer flow and surface water flow. A one-dimensional model for the sewer system and open channel flow is fully coupled to a two-dimensional depth-averaged model that simulates the overland flow. The tool uses a subgrid-based approach in order to take high resolution information of the sewer system and of the terrain into account [1, 2]. The combination of using the high resolution information and the subgrid based approach results in an accurate and efficient modelling tool. It is now possible to simulate entire urban water systems using extreme high resolution (0.5m x 0.5m) terrain data in combination with a detailed sewer and surface water network representation. The new tool has been tested in several Dutch cities, such as Rotterdam, Amsterdam and The Hague. We will present the results of an extreme precipitation event in the city of Schiedam (The Netherlands). This city deals with significant soil consolidation and the low-lying areas are prone to urban flooding. The simulation results are compared with measurements in the sewer network. References [1] Guus S. Stelling G.S., 2012. Quadtree flood simulations with subgrid digital elevation models. Water Management 165 (WM1):1329-1354. [2] Vincenzo Cassuli and Guus S. Stelling, 2013. A semi-implicit numerical model for urban drainage systems. International Journal for Numerical Methods in Fluids. Vol. 73:600-614. DOI: 10.1002/fld.3817

On the performances and wear of WC-diamond like carbon coated tools in drilling of CFRP/Titanium stacks

NASA Astrophysics Data System (ADS)

Boccarusso, L.; Durante, M.; Impero, F.; Minutolo, F. Memola Capece; Scherillo, F.; Squillace, A.

2016-10-01

The use of hybrid structures made of CFRP and titanium alloys is growing more and more in the last years in the aerospace industry due to the high strength to weight ratio. Because of their very different characteristics, the mechanical fastening represent the most effective joining technique for these materials. As a consequence, drilling process plays a key role in the assembly. The one shot drilling, i.e. the contemporary drilling of the stack of the two materials, seems to be the best option both in terms of time saving and assembly accuracy. Nevertheless, due to the considerable different machinability of fiber reinforced plastics and metallic materials, the one shot drilling is a critical process both for the holes quality and for the tools wear. This research was carried out to study the effectiveness of new generation tools in the drilling of CFRP/Titanium stacks. The tools are made of sintered grains of tungsten carbide (WC) in a binder of cobalt and coated with Diamond like carbon (DLC), and are characterized by a patented geometry; they mainly differ in parent WC grain size and binder percentage. Both the cutting forces and the wear phenomena were accurately investigated and the results were analyzed as a function of number of holes and their quality. The results show a clear increase of the cutting forces with the number of holes for all the used drilling tools. Moreover, abrasive wear phenomena that affect initially the tools coating layer were observed.

Coordinating the Complexity of Tools, Tasks, and Users: On Theory-Based Approaches to Authoring Tool Usability

ERIC Educational Resources Information Center

Murray, Tom

2016-01-01

Intelligent Tutoring Systems authoring tools are highly complex educational software applications used to produce highly complex software applications (i.e. ITSs). How should our assumptions about the target users (authors) impact the design of authoring tools? In this article I first reflect on the factors leading to my original 1999 article on…

Ajustement automatique des parametres de coupe pour l'obtention de stabilite dynamique en usinage

NASA Astrophysics Data System (ADS)

Tabet, Ricardo

High speed machining has as principal limitation the dynamic stability of the cutting action which can generate premature wear of the machine spindle and the cutting tool, tool breakage and dimensional errors on the machined part. This phenomenon is known in the literature as chatter and is defined as being self-excited vibrations. This master thesis presents an approach applicable to manufacturing environments that allows eliminating chatter in real time during machining of aerospace aluminum alloys before the damaging effect can occur. A control algorithm is developed in order to detect chatter using a microphone and by analyzing the audio signal in the frequency domain. The analysis allows determining precisely the frequency at which the chatter occurs and therefore, the spindle speed is adjusted in order to make the tooth passing frequency equal to the detected chatter frequency. Also, a new feedrate is determined by keeping a constant chip load and within the physical limits of the cutting tool. The new cutting parameters are then sent out to the machine controller as a command using a communication interface between an external computer and the controller. Multiples experimental tests were conducted to validate the effectiveness to detect and suppress chatter. High speed machining tests, between 15 000 and 33 000 RPM, were performed in order to reflect real conditions for aerospace components manufacturing.

DR2DI: a powerful computational tool for predicting novel drug-disease associations

NASA Astrophysics Data System (ADS)

Lu, Lu; Yu, Hua

2018-05-01

Finding the new related candidate diseases for known drugs provides an effective method for fast-speed and low-risk drug development. However, experimental identification of drug-disease associations is expensive and time-consuming. This motivates the need for developing in silico computational methods that can infer true drug-disease pairs with high confidence. In this study, we presented a novel and powerful computational tool, DR2DI, for accurately uncovering the potential associations between drugs and diseases using high-dimensional and heterogeneous omics data as information sources. Based on a unified and extended similarity kernel framework, DR2DI inferred the unknown relationships between drugs and diseases using Regularized Kernel Classifier. Importantly, DR2DI employed a semi-supervised and global learning algorithm which can be applied to uncover the diseases (drugs) associated with known and novel drugs (diseases). In silico global validation experiments showed that DR2DI significantly outperforms recent two approaches for predicting drug-disease associations. Detailed case studies further demonstrated that the therapeutic indications and side effects of drugs predicted by DR2DI could be validated by existing database records and literature, suggesting that DR2DI can be served as a useful bioinformatic tool for identifying the potential drug-disease associations and guiding drug repositioning. Our software and comparison codes are freely available at https://github.com/huayu1111/DR2DI.

Effective System for Automatic Bundle Block Adjustment and Ortho Image Generation from Multi Sensor Satellite Imagery

NASA Astrophysics Data System (ADS)

Akilan, A.; Nagasubramanian, V.; Chaudhry, A.; Reddy, D. Rajesh; Sudheer Reddy, D.; Usha Devi, R.; Tirupati, T.; Radhadevi, P. V.; Varadan, G.

2014-11-01

Block Adjustment is a technique for large area mapping for images obtained from different remote sensingsatellites.The challenge in this process is to handle huge number of satellite imageries from different sources with different resolution and accuracies at the system level. This paper explains a system with various tools and techniques to effectively handle the end-to-end chain in large area mapping and production with good level of automation and the provisions for intuitive analysis of final results in 3D and 2D environment. In addition, the interface for using open source ortho and DEM references viz., ETM, SRTM etc. and displaying ESRI shapes for the image foot-prints are explained. Rigorous theory, mathematical modelling, workflow automation and sophisticated software engineering tools are included to ensure high photogrammetric accuracy and productivity. Major building blocks like Georeferencing, Geo-capturing and Geo-Modelling tools included in the block adjustment solution are explained in this paper. To provide optimal bundle block adjustment solution with high precision results, the system has been optimized in many stages to exploit the full utilization of hardware resources. The robustness of the system is ensured by handling failure in automatic procedure and saving the process state in every stage for subsequent restoration from the point of interruption. The results obtained from various stages of the system are presented in the paper.

DR2DI: a powerful computational tool for predicting novel drug-disease associations

NASA Astrophysics Data System (ADS)

Lu, Lu; Yu, Hua

2018-04-01

Finding the new related candidate diseases for known drugs provides an effective method for fast-speed and low-risk drug development. However, experimental identification of drug-disease associations is expensive and time-consuming. This motivates the need for developing in silico computational methods that can infer true drug-disease pairs with high confidence. In this study, we presented a novel and powerful computational tool, DR2DI, for accurately uncovering the potential associations between drugs and diseases using high-dimensional and heterogeneous omics data as information sources. Based on a unified and extended similarity kernel framework, DR2DI inferred the unknown relationships between drugs and diseases using Regularized Kernel Classifier. Importantly, DR2DI employed a semi-supervised and global learning algorithm which can be applied to uncover the diseases (drugs) associated with known and novel drugs (diseases). In silico global validation experiments showed that DR2DI significantly outperforms recent two approaches for predicting drug-disease associations. Detailed case studies further demonstrated that the therapeutic indications and side effects of drugs predicted by DR2DI could be validated by existing database records and literature, suggesting that DR2DI can be served as a useful bioinformatic tool for identifying the potential drug-disease associations and guiding drug repositioning. Our software and comparison codes are freely available at https://github.com/huayu1111/DR2DI.

Precession technique and electron diffractometry as new tools for crystal structure analysis and chemical bonding determination.

PubMed

Avilov, A; Kuligin, K; Nicolopoulos, S; Nickolskiy, M; Boulahya, K; Portillo, J; Lepeshov, G; Sobolev, B; Collette, J P; Martin, N; Robins, A C; Fischione, P

2007-01-01

We have developed a new fast electron diffractometer working with high dynamic range and linearity for crystal structure determinations. Electron diffraction (ED) patterns can be scanned serially in front of a Faraday cage detector; the total measurement time for several hundred ED reflections can be tens of seconds having high statistical accuracy for all measured intensities (1-2%). This new tool can be installed to any type of TEM without any column modification and is linked to a specially developed electron beam precession "Spinning Star" system. Precession of the electron beam (Vincent-Midgley technique) reduces dynamical effects allowing also use of accurate intensities for crystal structure analysis. We describe the technical characteristics of this new tool together with the first experimental results. Accurate measurement of electron diffraction intensities by electron diffractometer opens new possibilities not only for revealing unknown structures, but also for electrostatic potential determination and chemical bonding investigation. As an example, we present detailed atomic bonding information of CaF(2) as revealed for the first time by precise electron diffractometry.

Unphysiologically high magnesium concentrations support chondrocyte proliferation and redifferentiation.

PubMed

Feyerabend, Frank; Witte, Frank; Kammal, Michael; Willumeit, Regine

2006-12-01

The effect of unphysiologically high extracellular magnesium concentrations on chondrocytes, induced by the supplementation of magnesium sulfate, was studied using a 3-phase tissue engineering model. The experiments showed that chondrocyte proliferation and redifferentiation, on the gene and protein expression level, are enhanced. A negative influence was found during chondrogenesis where an inhibition of extracellular matrix formation was observed. In addition, a direct impact on chondrocyte metabolism, elevated magnesium concentrations also affected growth factor effectiveness by consecutive influences during chondrogenesis. All observations were dosage dependent. The results of this study indicate that magnesium may be a useful tool for cartilage tissue engineering.

Pre-Finishing of SiC for Optical Applications

NASA Technical Reports Server (NTRS)

Rozzi, Jay; Clavier, Odile; Gagne, John

2011-01-01

13 Manufacturing & Prototyping A method is based on two unique processing steps that are both based on deterministic machining processes using a single-point diamond turning (SPDT) machine. In the first step, a high-MRR (material removal rate) process is used to machine the part within several microns of the final geometry. In the second step, a low-MRR process is used to machine the part to near optical quality using a novel ductile regime machining (DRM) process. DRM is a deterministic machining process associated with conditions under high hydrostatic pressures and very small depths of cut. Under such conditions, using high negative-rake angle cutting tools, the high-pressure region near the tool corresponds to a plastic zone, where even a brittle material will behave in a ductile manner. In the high-MRR processing step, the objective is to remove material with a sufficiently high rate such that the process is economical, without inducing large-scale subsurface damage. A laser-assisted machining approach was evaluated whereby a CO2 laser was focused in advance of the cutting tool. While CVD (chemical vapor deposition) SiC was successfully machined with this approach, the cutting forces were substantially higher than cuts at room temperature under the same machining conditions. During the experiments, the expansion of the part and the tool due to the heating was carefully accounted for. The higher cutting forces are most likely due to a small reduction in the shear strength of the material compared with a larger increase in friction forces due to the thermal softening effect. The key advantage is that the hybrid machine approach has the potential to achieve optical quality without the need for a separate optical finishing step. Also, this method is scalable, so one can easily progress from machining 50-mm-diameter samples to the 250-mm-diameter mirror that NASA desires.

A new tool for the assessment of satisfaction with iron chelation therapy (ICT-Sat) for patients with β-thalassemia major.

PubMed

Elalfy, Mohsen S; Massoud, Walid; Elsherif, Nayera H; Labib, Jonair H; Elalfy, Omar M; Elaasar, Safaa; von Mackensen, Sylvia

2012-06-01

High satisfaction with iron chelation is a major determinant for adherence to ICT in beta-thalassaemia major (β-TM) patients. In this study, a new tool to assess different domains of satisfaction for available forms of ICT was developed and validated. The impact of patients' satisfaction with ICT has been tested. Items were generated via focus groups and a preliminary version with 24 items (ICT-Sat) with an additional item for treatment preference and a knowledge questionnaire (KQ) was developed. 170 β-TM patients from three Thalassaemia centers in Egypt, aged 2-32 years received three questionnaires to fill in; the new ICT-Sat, a KQ, and a previously validated tool for satisfaction with ICT (SICT) and retested 4-6 weeks later to ensure re-test reliability. Type of chelation, drug related adverse events, compliance with ICT, and serum ferritin level (SF) during the year prior to the study as well as available cardiac T2*data were recorded. One hundred and fifty two β-TM patients completed all questionnaires; median age was 12 years. The final 15 remaining ICT-Sat items, yielding to four domain scores, explained 70.6% of the total variance. The "perceived effectiveness" and "fear and worries" domains of the ICT-Sat correlated significantly with the domains "perceived effectiveness" and "acceptance" of the SICT. Patients treated with oral ICT were more satisfied with perceived effectiveness, and their side effects. A new clinically based ICT-Sat tool was developed and revealed good psychometric characteristics. Adherence to ICT was better correlated with "perceived effectiveness" and SF level. Copyright © 2012 Wiley Periodicals, Inc.

Growth (AlCrNbSiTiV)N thin films on the interrupted turning and properties using DCMS and HIPIMS system

NASA Astrophysics Data System (ADS)

Chang, Kai-Sheng; Chen, Kuan-Ta; Hsu, Chun-Yao; Hong, Po-Da

2018-05-01

This paper determines the optimal settings in the deposition parameters for (AlCrNbSiTiV)N high-entropy alloy (HEAs) nitride films that are deposited on CBN cutting tools and glass substrates. We use direct current magnetron sputtering (DCMS) and high power impulse magnetron sputtering (HIPIMS), with Ar plasma and N2 reactive gases. Experiments with the grey-Taguchi method are conducted to determine the effect of deposition parameters (deposition time, substrate DC bias, DC power and substrate temperature) on interrupted turning 50CrMo4 steel machining and the films' structural properties. Experimental result shows that the multiple performance characteristics for these (AlCrNbSiTiV)N HEAs film coatings can be improved using the grey-Taguchi method. As can be seen, the coated film is homogeneous, very compact and exhibits perfect adherence to the substrate. The distribution of elements is homogeneous through the depth of the (AlCrNbSiTiV)N film, as measured by an auger electron nanoscope. After interrupted turning with an (AlCrNbSiTiV)N film coated tool, we obtain much longer tool life than when using uncoated tools. The correlation of these results with microstructure analysis and tool life indicates that HIPIMS discharge induced a higher (AlCrNbSiTiV)N film density, a smoother surface structure and a higher hardness surface.