Sample records for htgr generic technology

  1. Consolidated fuel reprocessing program

    NASA Astrophysics Data System (ADS)

    1985-02-01

    Improved processes and components for the Breeder Reprocessing Engineering Test (BRET) were identified and developed as well as the design, procurement and development of prototypic equipment. The integrated testing of process equipment and flowsheets prototypical of a pilot scale full reprocessing plant, and also for testing prototypical remote features of specific complex components in the system are provided. Information to guide the long range activities of the Consolidated Fuel Reprocessing Program (CERP), a focal point for foreign exchange activities, and support in specialized technical areas are described. Research and development activities in HTGR fuel treatment technology are being conducted. Head-end process and laboratory scale development efforts, as well as studies specific to HTGR fuel, are reported. The development of off-gas treatment processes has generic application to fuel reprocessing, progress in this work is also reported.

  2. NRC Licensing Status Summary Report for NGNP

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Moe, Wayne Leland; Kinsey, James Carl

    2014-11-01

    The Next Generation Nuclear Plant (NGNP) Project, initiated at Idaho National Laboratory (INL) by the U.S. Department of Energy (DOE) pursuant to provisions of the Energy Policy Act of 2005, is based on research and development activities supported by the Department of Energy Generation IV Nuclear Energy Systems Initiative. The principal objective of the NGNP Project is to support commercialization of high temperature gas-cooled reactor (HTGR) technology. The HTGR is a helium-cooled and graphite moderated reactor that can operate at temperatures much higher than those of conventional light water reactor (LWR) technologies. The NGNP will be licensed for construction andmore » operation by the Nuclear Regulatory Commission (NRC). However, not all elements of current regulations (and their related implementation guidance) can be applied to HTGR technology at this time. Certain policies established during past LWR licensing actions must be realigned to properly accommodate advanced HTGR technology. A strategy for licensing HTGR technology was developed and executed through the cooperative effort of DOE and the NRC through the NGNP Project. The purpose of this report is to provide a snapshot of the current status of the still evolving pre-license application regulatory framework relative to commercial HTGR technology deployment in the U.S. The following discussion focuses on (1) describing what has been accomplished by the NGNP Project up to the time of this report, and (2) providing observations and recommendations concerning actions that remain to be accomplished to enable the safe and timely licensing of a commercial HTGR facility in the U.S.« less

  3. High-temperature gas-cooled reactor technology development program. Annual progress report for period ending December 31, 1982

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kasten, P.R.; Rittenhouse, P.L.; Bartine, D.E.

    1983-06-01

    During 1982 the High-Temperature Gas-Cooled Reactor (HTGR) Technology Program at Oak Ridge National Laboratory (ORNL) continued to develop experimental data required for the design and licensing of cogeneration HTGRs. The program involves fuels and materials development (including metals, graphite, ceramic, and concrete materials), HTGR chemistry studies, structural component development and testing, reactor physics and shielding studies, performance testing of the reactor core support structure, and HTGR application and evaluation studies.

  4. NGNP Project 2011 Status and Path Forward

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    L.E. Demick

    2011-12-01

    High Temperature Gas Reactor (HTGR) technology can play an important role in the United States’ energy future by extending the use of nuclear energy for non-electricity energy production missions as well as continuing to provide a considerable base load electric power generation capability. Extending nuclear energy into the industrial and transportation sectors through the co-production of process heat and electricity provides safe and reliable energy for these sectors in an environmentally responsible manner. The safety case for the modular HTGR provides a substantial improvement in nuclear plant safety for the protection of the public and the environment, and supports collocationmore » of the HTGR with major industrial facilities. The NGNP Project at the Idaho National Laboratory has been working toward an objective of commercializing the HTGR technology under DOE direction since 2006. The Project is undergoing a quantum shift in direction and scope as a result of recent DOE decisions. This paper summarizes where the Project has been, where it is at the time of this writing and what is needed in future activities to commercialize HTGR technology.« less

  5. JPRS Report, Science & Technology, China: Energy

    DTIC Science & Technology

    1988-06-29

    capacity. There are currently two types of HTGR reactor designs: the particle-bed core , which uses spherical fuel elements, and the rod type core , in...and trial operating experience with the HTGR reactor. Its main design features are as follows. 1. A particle-bed core , continuous fueling and...Favorable for Development of Small-Scale HTGR (Xu Jiming; HE DONGLI GONGCHENG, Feb 88) 47 ERRATUM: In JPRS-CEN-88-003 of 25 April 1988 in article

  6. Gas-Cooled Reactor Programs annual progress report for period ending December 31, 1973. [HTGR fuel reprocessing, fuel fabrication, fuel irradiation, core materials, and fission product distribution; GCFR fuel irradiation and steam generator modeling

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kasten, P.R.; Coobs, J.H.; Lotts, A.L.

    1976-04-01

    Progress is summarized in studies relating to HTGR fuel reprocessing, refabrication, and recycle; HTGR fuel materials development and performance testing; HTGR PCRV development; HTGR materials investigations; HTGR fuel chemistry; HTGR safety studies; and GCFR irradiation experiments and steam generator modeling.

  7. Baseline Concept Description of a Small Modular High Temperature Reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hans Gougar

    2014-05-01

    The objective of this report is to provide a description of generic small modular high temperature reactors (herein denoted as an smHTR), summarize their distinguishing attributes, and lay out the research and development (R&D) required for commercialization. The generic concepts rely heavily on the modular high temperature gas-cooled reactor designs developed in the 1980s which were never built but for which pre-licensing or certification activities were conducted. The concept matured more recently under the Next Generation Nuclear Plant (NGNP) project, specifically in the areas of fuel and material qualification, methods development, and licensing. As all vendor-specific designs proposed under NGNPmore » were all both ‘small’ or medium-sized and ‘modular’ by International Atomic Energy Agency (IAEA) and Department of Energy (DOE) standards, the technical attributes, challenges, and R&D needs identified, addressed, and documented under NGNP are valid and appropriate in the context of Small Modular Reactor (SMR) applications. Although the term High Temperature Reactor (HTR) is commonly used to denote graphite-moderated, thermal spectrum reactors with coolant temperatures in excess of 650oC at the core outlet, in this report the historical term High Temperature Gas-Cooled Reactor (HTGR) will be used to distinguish the gas-cooled technology described herein from its liquid salt-cooled cousin. Moreover, in this report it is to be understood that the outlet temperature of the helium in an HTGR has an upper limit of 950 degrees C which corresponds to the temperature to which certain alloys are currently being qualified under DOE’s ARC program. Although similar to the HTGR in just about every respect, the Very High Temperature Reactor (VHTR) may have an outlet temperature in excess of 950 degrees C and is therefore farther from commercialization because of the challenges posed to materials exposed to these temperatures. The VHTR is the focus of R&D under the Generation IV program and its specific R&D needs will be included in this report when appropriate for comparison. The distinguishing features of the HTGR are the refractory (TRISO) coated particle fuel, the low-power density, graphite-moderated core, and the high outlet temperature of the inert helium coolant. The low power density and fuel form effectively eliminate the possibility of core melt, even upon a complete loss of coolant pressure and flow. The graphite, which constitutes the bulk of the core volume and mass, provides a large thermal buffer that absorbs fission heat such that thermal transients occur over a timespan of hours or even days. As chemically-inert helium is already a gas, there is no coolant temperature or void feedback on the neutronics and no phase change or corrosion product that could degrade heat transfer. Furthermore, the particle coatings and interstitial graphite retain fission products such that the source terms at the plant boundary remain well below actionable levels under all anticipated nominal and off-normal operating conditions. These attributes enable the reactor to supply process heat to a collocated industrial plant with negligible risk of contamination and minimal dynamic coupling of the facilities (Figure 1). The exceptional retentive properties of coated particle fuel in a graphite matrix were first demonstrated in the DRAGON reactor, a European research facility that began operation in 1964.« less

  8. Baseline Concept Description of a Small Modular High Temperature Reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gougar, Hans D.

    2014-10-01

    The objective of this report is to provide a description of generic small modular high temperature reactors (herein denoted as an smHTR), summarize their distinguishing attributes, and lay out the research and development (R&D) required for commercialization. The generic concepts rely heavily on the modular high temperature gas-cooled reactor designs developed in the 1980s which were never built but for which pre-licensing or certification activities were conducted. The concept matured more recently under the Next Generation Nuclear Plant (NGNP) project, specifically in the areas of fuel and material qualification, methods development, and licensing. As all vendor-specific designs proposed under NGNPmore » were all both ‘small’ or medium-sized and ‘modular’ by International Atomic Energy Agency (IAEA) and Department of Energy (DOE) standards, the technical attributes, challenges, and R&D needs identified, addressed, and documented under NGNP are valid and appropriate in the context of Small Modular Reactor (SMR) applications. Although the term High Temperature Reactor (HTR) is commonly used to denote graphite-moderated, thermal spectrum reactors with coolant temperatures in excess of 650oC at the core outlet, in this report the historical term High Temperature Gas-Cooled Reactor (HTGR) will be used to distinguish the gas-cooled technology described herein from its liquid salt-cooled cousin. Moreover, in this report it is to be understood that the outlet temperature of the helium in an HTGR has an upper limit of 950 degrees C which corresponds to the temperature to which certain alloys are currently being qualified under DOE’s ARC program. Although similar to the HTGR in just about every respect, the Very High Temperature Reactor (VHTR) may have an outlet temperature in excess of 950 degrees C and is therefore farther from commercialization because of the challenges posed to materials exposed to these temperatures. The VHTR is the focus of R&D under the Generation IV program and its specific R&D needs will be included in this report when appropriate for comparison. The distinguishing features of the HTGR are the refractory (TRISO) coated particle fuel, the low-power density, graphite-moderated core, and the high outlet temperature of the inert helium coolant. The low power density and fuel form effectively eliminate the possibility of core melt, even upon a complete loss of coolant pressure and flow. The graphite, which constitutes the bulk of the core volume and mass, provides a large thermal buffer that absorbs fission heat such that thermal transients occur over a timespan of hours or even days. As chemically-inert helium is already a gas, there is no coolant temperature or void feedback on the neutronics and no phase change or corrosion product that could degrade heat transfer. Furthermore, the particle coatings and interstitial graphite retain fission products such that the source terms at the plant boundary remain well below actionable levels under all anticipated nominal and off-normal operating conditions. These attributes enable the reactor to supply process heat to a collocated industrial plant with negligible risk of contamination and minimal dynamic coupling of the facilities (Figure 1). The exceptional retentive properties of coated particle fuel in a graphite matrix were first demonstrated in the DRAGON reactor, a European research facility that began operation in 1964.« less

  9. HTGR technology economic/ business analysis and trade studies impacts. Impacts of HTGR commericialization on the U.S. economy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Silady, Fred

    The approach to this task was to initially review the 2012 Business Plan and supporting analyses for the above impacts. With that understanding as a base, the Business Plan impacts are updated in terms of the GDP and job creation as a result of additional studies and inputs such as the revised market assessment from Task 1.1. For the impacts on U.S. competitiveness, the NGNP Industry Alliance team members have been utilized to provide inputs on supplier infrastructure development and on vendor capability.

  10. Proposed Advanced Reactor Adaptation of the Standard Review Plan NUREG-0800 Chapter 4 (Reactor) for Sodium-Cooled Fast Reactors and Modular High-Temperature Gas-Cooled Reactors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Belles, Randy; Poore, III, Willis P.; Brown, Nicholas R.

    2017-03-01

    This report proposes adaptation of the previous regulatory gap analysis in Chapter 4 (Reactor) of NUREG 0800, Standard Review Plan (SRP) for the Review of Safety Analysis Reports for Nuclear Power Plants: LWR [Light Water Reactor] Edition. The proposed adaptation would result in a Chapter 4 review plan applicable to certain advanced reactors. This report addresses two technologies: the sodium-cooled fast reactor (SFR) and the modular high temperature gas-cooled reactor (mHTGR). SRP Chapter 4, which addresses reactor components, was selected for adaptation because of the possible significant differences in advanced non-light water reactor (non-LWR) technologies compared with the current LWR-basedmore » description in Chapter 4. SFR and mHTGR technologies were chosen for this gap analysis because of their diverse designs and the availability of significant historical design detail.« less

  11. Improvement of Modeling HTGR Neutron Physics by Uncertainty Analysis with the Use of Cross-Section Covariance Information

    NASA Astrophysics Data System (ADS)

    Boyarinov, V. F.; Grol, A. V.; Fomichenko, P. A.; Ternovykh, M. Yu

    2017-01-01

    This work is aimed at improvement of HTGR neutron physics design calculations by application of uncertainty analysis with the use of cross-section covariance information. Methodology and codes for preparation of multigroup libraries of covariance information for individual isotopes from the basic 44-group library of SCALE-6 code system were developed. A 69-group library of covariance information in a special format for main isotopes and elements typical for high temperature gas cooled reactors (HTGR) was generated. This library can be used for estimation of uncertainties, associated with nuclear data, in analysis of HTGR neutron physics with design codes. As an example, calculations of one-group cross-section uncertainties for fission and capture reactions for main isotopes of the MHTGR-350 benchmark, as well as uncertainties of the multiplication factor (k∞) for the MHTGR-350 fuel compact cell model and fuel block model were performed. These uncertainties were estimated by the developed technology with the use of WIMS-D code and modules of SCALE-6 code system, namely, by TSUNAMI, KENO-VI and SAMS. Eight most important reactions on isotopes for MHTGR-350 benchmark were identified, namely: 10B(capt), 238U(n,γ), ν5, 235U(n,γ), 238U(el), natC(el), 235U(fiss)-235U(n,γ), 235U(fiss).

  12. ICP-MS analysis of fission product diffusion in graphite for High-Temperature Gas-Cooled Reactors

    NASA Astrophysics Data System (ADS)

    Carter, Lukas M.

    Release of radioactive fission products from nuclear fuel during normal reactor operation or in accident scenarios is a fundamental safety concern. Of paramount importance are the understanding and elucidation of mechanisms of chemical interaction, nuclear interaction, and transport phenomena involving fission products. Worldwide efforts to reduce fossil fuel dependence coupled with an increasing overall energy demand have generated renewed enthusiasm toward nuclear power technologies, and as such, these mechanisms continue to be the subjects of vigorous research. High-Temperature Gas-Cooled Reactors (HTGRs or VHTRs) remain one of the most promising candidates for the next generation of nuclear power reactors. An extant knowledge gap specific to HTGR technology derives from an incomplete understanding of fission product transport in major core materials under HTGR operational conditions. Our specific interest in the current work is diffusion in reactor graphite. Development of methods for analysis of diffusion of multiple fission products is key to providing accurate models for fission product release from HTGR core components and the reactor as a whole. In the present work, a specialized diffusion cell has been developed and constructed to facilitate real-time diffusion measurements via ICP-MS. The cell utilizes a helium gas-jet system which transports diffusing fission products to the mass spectrometer using carbon nanoparticles. The setup was designed to replicate conditions present in a functioning HTGR, and can be configured for real-time release or permeation measurements of single or multiple fission products from graphite or other core materials. In the present work, we have analyzed release rates of cesium in graphite grades IG-110, NBG-18, and a commercial grade of graphite, as well as release of iodine in IG-110. Additionally we have investigated infusion of graphite samples with Cs, I, Sr, Ag, and other surrogate fission products for use in release or profile measurements of diffusion coefficients.

  13. JPRS Report, Science & Technology, China: Energy

    DTIC Science & Technology

    1989-06-26

    certain areas such as modular HTGR technology. In nuclear power develop - ment we currently face both challenges and opportunities, both risks and...22161 JmC QUALITY EJSPSÜSED 3 Science & Technology China: Energy JPRS-CEN-89-006 CONTENTS 26 June 1989 NATIONAL DEVELOPMENTS No Easy Solution Seen...Be Developed [XINHUA, 16 May 89] 21 National Oil Firm Sets 5-Year Goals [CEI Database, 9 May 89] , 21 Zhongyuan Oil Field Is Among Fastest

  14. A preliminary systems-engineering study of an advanced nuclear-electrolytic hydrogen-production facility

    NASA Technical Reports Server (NTRS)

    Escher, W. J. D.; Donakowski, T. D.; Tison, R. R.

    1975-01-01

    An advanced nuclear-electrolytic hydrogen-production facility concept was synthesized at a conceptual level with the objective of minimizing estimated hydrogen-production costs. The concept is a closely-integrated, fully-dedicated (only hydrogen energy is produced) system whose components and subsystems are predicted on ''1985 technology.'' The principal components are: (1) a high-temperature gas-cooled reactor (HTGR) operating a helium-Brayton/ammonia-Rankine binary cycle with a helium reactor-core exit temperature of 980 C, (2) acyclic d-c generators, (3) high-pressure, high-current-density electrolyzers based on solid-polymer electrolyte technology. Based on an assumed 3,000 MWt HTGR the facility is capable of producing 8.7 million std cu m/day of hydrogen at pipeline conditions, 6,900 kPa. Coproduct oxygen is also available at pipeline conditions at one-half this volume. It has further been shown that the incorporation of advanced technology provides an overall efficiency of about 43 percent, as compared with 25 percent for a contemporary nuclear-electric plant powering close-coupled contemporary industrial electrolyzers.

  15. Issues and Potential Program on Denatured Fuel Utilization.

    DTIC Science & Technology

    1978-12-01

    HTGR fuel develop - ment program ; 4. coated particles of (U,Th)02 have been extensively tested as potential HTGR fuels . A detailed summary of the...current scrap and waste treatment requirements. dBase case for all HTGR (Prismatic Fuel Element) cases based on data in "Summary Program Plan...Alternate Program for HTGR Fuel Recycle," April 11, 1975, Draft. 19 a --- AC8NCi09 The principal factors that result in a nominally-higher cost for

  16. High Temperature Gas Reactors: Assessment of Applicable Codes and Standards

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McDowell, Bruce K.; Nickolaus, James R.; Mitchell, Mark R.

    2011-10-31

    Current interest expressed by industry in HTGR plants, particularly modular plants with power up to about 600 MW(e) per unit, has prompted NRC to task PNNL with assessing the currently available literature related to codes and standards applicable to HTGR plants, the operating history of past and present HTGR plants, and with evaluating the proposed designs of RPV and associated piping for future plants. Considering these topics in the order they are arranged in the text, first the operational histories of five shut-down and two currently operating HTGR plants are reviewed, leading the authors to conclude that while small, simplemore » prototype HTGR plants operated reliably, some of the larger plants, particularly Fort St. Vrain, had poor availability. Safety and radiological performance of these plants has been considerably better than LWR plants. Petroleum processing plants provide some applicable experience with materials similar to those proposed for HTGR piping and vessels. At least one currently operating plant - HTR-10 - has performed and documented a leak before break analysis that appears to be applicable to proposed future US HTGR designs. Current codes and standards cover some HTGR materials, but not all materials are covered to the high temperatures envisioned for HTGR use. Codes and standards, particularly ASME Codes, are under development for proposed future US HTGR designs. A 'roadmap' document has been prepared for ASME Code development; a new subsection to section III of the ASME Code, ASME BPVC III-5, is scheduled to be published in October 2011. The question of terminology for the cross-duct structure between the RPV and power conversion vessel is discussed, considering the differences in regulatory requirements that apply depending on whether this structure is designated as a 'vessel' or as a 'pipe'. We conclude that designing this component as a 'pipe' is the more appropriate choice, but that the ASME BPVC allows the owner of the facility to select the preferred designation, and that either designation can be acceptable.« less

  17. User's manual for the Composite HTGR Analysis Program (CHAP-1)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Gilbert, J.S.; Secker, P.A. Jr.; Vigil, J.C.

    1977-03-01

    CHAP-1 is the first release version of an HTGR overall plant simulation program with both steady-state and transient solution capabilities. It consists of a model-independent systems analysis program and a collection of linked modules, each representing one or more components of the HTGR plant. Detailed instructions on the operation of the code and detailed descriptions of the HTGR model are provided. Information is also provided to allow the user to easily incorporate additional component modules, to modify or replace existing modules, or to incorporate a completely new simulation model into the CHAP systems analysis framework.

  18. Multi-Megawatt Space Nuclear Power Generation

    DTIC Science & Technology

    1993-06-28

    electric generation, both for open- and closed-cycle opera- tion. These reactors use the particulate fuel of the type developed for HTGR reactors. What...commercial HTGR power reactors, the particles are held in place and directly cooled. Figure 2.7 shows the two types of fuel particles developed for...of MW(e), for pulsed energy devices. The FBR would use HTGR -type particle fuel , contained in a annular bed be- tween two porous frits. Helium would

  19. Using SA508/533 for the HTGR Vessel Material

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Larry Demick

    2012-06-01

    This paper examines the influence of High Temperature Gas-cooled Reactor (HTGR) module power rating and normal operating temperatures on the use of SA508/533 material for the HTGR vessel system with emphasis on the calculated times at elevated temperatures approaching or exceeding ASME Code Service Limits (Levels B&C) to which the reactor pressure vessel could be exposed during postulated pressurized and depressurized conduction cooldown events over its design lifetime.

  20. Modeling and Comparison of Options for the Disposal of Excess Weapons Plutonium in Russia

    DTIC Science & Technology

    2002-04-01

    fuel LWR cooling time LWR Pu load rate LWR net destruction frac ~ LWR reactors op life mox core frac Excess Separated Pu HTGR Cycle Pu in Waste LWR MOX...reflecting the cycle used in this type of reactor. For the HTGR , the entire core consists of plutonium fuel , therefore a core fraction is not specified...cooling time Time spent fuel unloaded from HTGR reactor must cool before permanently stored 3 years Mox core fraction Fraction of

  1. Availability analysis of an HTGR fuel recycle facility. Summary report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sharmahd, J.N.

    1979-11-01

    An availability analysis of reprocessing systems in a high-temperature gas-cooled reactor (HTGR) fuel recycle facility was completed. This report summarizes work done to date to define and determine reprocessing system availability for a previously planned HTGR recycle reference facility (HRRF). Schedules and procedures for further work during reprocessing development and for HRRF design and construction are proposed in this report. Probable failure rates, transfer times, and repair times are estimated for major system components. Unscheduled down times are summarized.

  2. Proceedings of the International Congress (12th), Corrosion Control for Low-Cost Reliability, Held in Houston, Texas on September 19 -24, 1993. Volume 1. Coatings

    DTIC Science & Technology

    1993-09-24

    3]) Gas-cooled reactors were first developed in Europe and have been built since 1956. HTGR , equipped with the core of ceramic coated particle fuels ...demands must also be covered by nuclear energy in not so long future. Programs on developing the process heating HTGR have been promoted mainly in Germany...Material programs for HTGR have been promoted in several countries since late 1960’s which include the tasks of developing and qualifying materials, eg

  3. Progress report on the k{sub infinity} measurements of HTGR type lattices with the oscillation technique at zero reactivity; Rapport d'advancement sur les mesures de K {sub infinite} des reseaux du type HTGR avec la technique de l'oscillateur a'reactivite' nulle (in French)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1971-01-15

    The principles of measuring k {sub infinity} for a HTGR lattice using the oscillation technique with zero reactivity were already presented at the ''9th reactor physics meeting of countries participating in the Dragon project''. A brief summary of the essential characteristics of the experiment is followed by a status report on present work.

  4. Uranium extraction from TRISO-coated fuel particles using supercritical CO2 containing tri-n-butyl phosphate.

    PubMed

    Zhu, Liyang; Duan, Wuhua; Xu, Jingming; Zhu, Yongjun

    2012-11-30

    High-temperature gas-cooled reactors (HTGRs) are advanced nuclear systems that will receive heavy use in the future. It is important to develop spent nuclear fuel reprocessing technologies for HTGR. A new method for recovering uranium from tristructural-isotropic (TRISO-) coated fuel particles with supercritical CO(2) containing tri-n-butyl phosphate (TBP) as a complexing agent was investigated. TRISO-coated fuel particles from HTGR fuel elements were first crushed to expose UO(2) pellet fuel kernels. The crushed TRISO-coated fuel particles were then treated under O(2) stream at 750°C, resulting in a mixture of U(3)O(8) powder and SiC shells. The conversion of U(3)O(8) into solid uranyl nitrate by its reaction with liquid N(2)O(4) in the presence of a small amount of water was carried out. Complete conversion was achieved after 60 min of reaction at 80°C, whereas the SiC shells were not converted by N(2)O(4). Uranyl nitrate in the converted mixture was extracted with supercritical CO(2) containing TBP. The cumulative extraction efficiency was above 98% after 20 min of online extraction at 50°C and 25 MPa, whereas the SiC shells were not extracted by TBP. The results suggest an attractive strategy for reprocessing spent nuclear fuel from HTGR to minimize the generation of secondary radioactive waste. Copyright © 2012 Elsevier B.V. All rights reserved.

  5. Safety and licensing of a small modular gas-cooled reactor system

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Brown, N.W.; Kelley, A.P. Jr.

    A modular side-by-side high-temperature gas-cooled reactor (SBS-HTGR) is being developed by Interatom/Kraftwerk Union (KWU). The General Electric Company and Interatom/KWU entered into a proprietary working agreement to continue develop jointly of the SBS-HTGR. A study on adapting the SBS-HTGR for application in the US has been completed. The study investigated the safety characteristics and the use of this type of design in an innovative approach to licensing. The safety objective guiding the design of the modular SBS-HTGR is to control radionuclide release by the retention of fission products within the fuel particles with minimal reliance on active design features. Themore » philosophy on which this objective is predicated is that by providing a simple safety case, the safety criteria can be demonstrated as being met with high confidence through conduct of a full-scale module safety test.« less

  6. AGR-2 and AGR-3/4 Release-to-Birth Ratio Data Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Pham, Binh T.; Einerson, Jeffrey J.; Scates, Dawn M.

    A series of Advanced Gas Reactor (AGR) irradiation tests is being conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) in support of development and qualification of tristructural isotropic (TRISO) low enriched fuel used in the High Temperature Gas-cooled Reactor (HTGR). Each AGR test consists of multiple independently controlled and monitored capsules containing fuel compacts placed in a graphite cylinder shrouded by a steel shell. These capsules are instrumented with thermocouples embedded in the graphite enabling temperature control. AGR configuration and irradiation conditions are based on prismatic HTGR technology that is distinguished primarily through use of heliummore » coolant, a low-power-density ceramic core capable of withstanding very high temperatures, and TRISO coated particle fuel. Thus, these tests provide valuable irradiation performance data to support fuel process development, qualify fuel for normal operating conditions, and support development and validation of fuel performance and fission product transport models and codes.« less

  7. High-temperature Gas Reactor (HTGR)

    NASA Astrophysics Data System (ADS)

    Abedi, Sajad

    2011-05-01

    General Atomics (GA) has over 35 years experience in prismatic block High-temperature Gas Reactor (HTGR) technology design. During this period, the design has recently involved into a modular have been performed to demonstrate its versatility. This versatility is directly related to refractory TRISO coated - particle fuel that can contain any type of fuel. This paper summarized GA's fuel cycle studies individually and compares each based upon its cycle sustainability, proliferation-resistance capabilities, and other performance data against pressurized water reactor (PWR) fuel cycle data. Fuel cycle studies LEU-NV;commercial HEU-Th;commercial LEU-Th;weapons-grade plutonium consumption; and burning of LWR waste including plutonium and minor actinides in the MHR. results show that all commercial MHR options, with the exception of HEU-TH, are more sustainable than a PWR fuel cycle. With LEU-NV being the most sustainable commercial options. In addition, all commercial MHR options out perform the PWR with regards to its proliferation-resistance, with thorium fuel cycle having the best proliferation-resistance characteristics.

  8. Neutron dose rate analysis on HTGR-10 reactor using Monte Carlo code

    NASA Astrophysics Data System (ADS)

    Suwoto; Adrial, H.; Hamzah, A.; Zuhair; Bakhri, S.; Sunaryo, G. R.

    2018-02-01

    The HTGR-10 reactor is cylinder-shaped core fuelled with kernel TRISO coated fuel particles in the spherical pebble with helium cooling system. The outlet helium gas coolant temperature outputted from the reactor core is designed to 700 °C. One advantage HTGR type reactor is capable of co-generation, as an addition to generating electricity, the reactor was designed to produce heat at high temperature can be used for other processes. The spherical fuel pebble contains 8335 TRISO UO2 kernel coated particles with enrichment of 10% and 17% are dispersed in a graphite matrix. The main purpose of this study was to analysis the distribution of neutron dose rates generated from HTGR-10 reactors. The calculation and analysis result of neutron dose rate in the HTGR-10 reactor core was performed using Monte Carlo MCNP5v1.6 code. The problems of double heterogeneity in kernel fuel coated particles TRISO and spherical fuel pebble in the HTGR-10 core are modelled well with MCNP5v1.6 code. The neutron flux to dose conversion factors taken from the International Commission on Radiological Protection (ICRP-74) was used to determine the dose rate that passes through the active core, reflectors, core barrel, reactor pressure vessel (RPV) and a biological shield. The calculated results of neutron dose rate with MCNP5v1.6 code using a conversion factor of ICRP-74 (2009) for radiation workers in the radial direction on the outside of the RPV (radial position = 220 cm from the center of the patio HTGR-10) provides the respective value of 9.22E-4 μSv/h and 9.58E-4 μSv/h for enrichment 10% and 17%, respectively. The calculated values of neutron dose rates are compliant with BAPETEN Chairman’s Regulation Number 4 Year 2013 on Radiation Protection and Safety in Nuclear Energy Utilization which sets the limit value for the average effective dose for radiation workers 20 mSv/year or 10μSv/h. Thus the protection and safety for radiation workers to be safe from the radiation source has been fulfilled. From the result analysis, it can be concluded that the model of calculation result of neutron dose rate for HTGR-10 core has met the required radiation safety standards.

  9. Preparation of high temperature gas-cooled reactor fuel element

    DOEpatents

    Bradley, Ronnie A.; Sease, John D.

    1976-01-01

    This invention relates to a method for the preparation of high temperature gas-cooled reactor (HTGR) fuel elements wherein uncarbonized fuel rods are inserted in appropriate channels of an HTGR fuel element block and the entire block is inserted in an autoclave for in situ carbonization under high pressure. The method is particularly applicable to remote handling techniques.

  10. HVAC [Heating, Ventilation and Air Conditioning] subsystem design description: 4 x 350 MW(t) Modular HTGR [High-Temperature Gas-Cooled Reactor] Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1986-06-01

    The HVAC system is a subsystem within the Mechanical Services Group (MSG). The HVAC system for the 4 x 350 MW(t) Modular HTGR Plant presently consists of ten, nonsafety-related subsystems located in the Nuclear Island (NI) and Energy Conversion Area (ECA) of the plant.

  11. Very high temperature behavior of HTGR core materials

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Soo, P.; Uneberg, G.; Sabatini, R.

    1978-01-01

    A description is given of experiments to investigate the behavior of HTGR core materials during hypothetical heatup accidents in which the core temperature is assumed to reach values between 2400/sup 0/C and the graphite sublimation range (>3600/sup 0/C). The work includes BISO coated fuel particle failure, simulated fission product migration in core graphite, and graphite sublimation behavior.

  12. 1170 MW/sub t/ HTGR steamer cogeneration plant: design and cost study

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    A conceptual design and cost study is presented for intermediate size high temperature gas-cooled reactor (HTGR) for industrial energy applications performed by United Engineers and Constructors Inc., (UE and C) and The General Atomic Company (GAC). The study is part of a program at ORNL and has the objective to provide support in the evaluation of the technical and economic feasibility of a single unit 1170 MW/sub t/ HTGR steam cycle cogeneration plant (referred to as the Steamer plant) for the production of industrial process energy. Inherent in the achievement of this objective, it was essential to perform a numbermore » of basic tasks such as the development of plant concept, capital cost estimate, project schedule and annual operation and maintenance (O and M) cost.« less

  13. Nuclear Electric Magnetohydrodynamic Propulsion for Submarine

    DTIC Science & Technology

    1989-05-01

    develop - ment strategies for the future. The base program includes the development of the LMFBR, and HTGR to...events. Oxide fuel is -134- being retained as a backup, pending the outcome of the metal fuel development program . The design allows for a quick fuel ... HTGR plants can be developed with much higher source temperature and core power density. High efficiency and low power den- sity characteristics

  14. Developmental assessment of the Fort St. Vrain version of the Composite HTGR Analysis Program (CHAP-2)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Stroh, K.R.

    1980-01-01

    The Composite HTGR Analysis Program (CHAP) consists of a model-independent systems analysis mainframe named LASAN and model-dependent linked code modules, each representing a component, subsystem, or phenomenon of an HTGR plant. The Fort St. Vrain (FSV) version (CHAP-2) includes 21 coded modules that model the neutron kinetics and thermal response of the core; the thermal-hydraulics of the reactor primary coolant system, secondary steam supply system, and balance-of-plant; the actions of the control system and plant protection system; the response of the reactor building; and the relative hazard resulting from fuel particle failure. FSV steady-state and transient plant data are beingmore » used to partially verify the component modeling and dynamic smulation techniques used to predict plant response to postulated accident sequences.« less

  15. Turbomachinery design considerations for the nuclear HTGR-GT power plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McDonald, C.F.; Smith, M.J.

    1979-11-01

    For several years, design studies have been under way in the USA on a nuclear closed-cycle gas turbine plant (HTGR-GT). Design aspects of the helium turbomachine portion of these studies are presented. Gas dynamic and mechanical design considerations are presented for helium turbomachines in the 400-MW(e) (non-intercooled) and 600-MW(e) (intercooled) power range. Design of the turbomachine is a key element in the overall power plant program effort, which is currently directed toward the selection of a reference HTGR-GT commercial plant configuration for the US utility market. A conservative design approach has been emphasized to provide maximum safety and durability. Themore » studies presented for the integrated plant concept outline the necessary close working relationship between the reactor primary system and turbomachine designers.« less

  16. Assessment of the SRI Gasification Process for Syngas Generation with HTGR Integration -- White Paper

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    A.M. Gandrik

    2012-04-01

    This white paper is intended to compare the technical and economic feasibility of syngas generation using the SRI gasification process coupled to several high-temperature gas-cooled reactors (HTGRs) with more traditional HTGR-integrated syngas generation techniques, including: (1) Gasification with high-temperature steam electrolysis (HTSE); (2) Steam methane reforming (SMR); and (3) Gasification with SMR with and without CO2 sequestration.

  17. The Shock and Vibration Digest. Volume 14, Number 11

    DTIC Science & Technology

    1982-11-01

    cooled reactor 1981) ( HTGR ) core under seismic excitation his been developed . N82-18644 The computer program can be used to predict the behavior (In...French) of the HTGR core under seismic excitation. Key Words: Computer programs , Modal analysis, Beams, Undamped structures A computation method is...30) PROGRAMMING c c Dale and Cohen [221 extended the method of McMunn and Plunkett [201 developed a compute- McMunn and Plunkett to continuous systems

  18. Efficiency and cost advantages of an advanced-technology nuclear electrolytic hydrogen-energy production facility

    NASA Technical Reports Server (NTRS)

    Donakowski, T. D.; Escher, W. J. D.; Gregory, D. P.

    1977-01-01

    The concept of an advanced-technology (viz., 1985 technology) nuclear-electrolytic water electrolysis facility was assessed for hydrogen production cost and efficiency expectations. The facility integrates (1) a high-temperature gas-cooled nuclear reactor (HTGR) operating a binary work cycle, (2) direct-current (d-c) electricity generation via acyclic generators, and (3) high-current-density, high-pressure electrolyzers using a solid polymer electrolyte (SPE). All subsystems are close-coupled and optimally interfaced for hydrogen production alone (i.e., without separate production of electrical power). Pipeline-pressure hydrogen and oxygen are produced at 6900 kPa (1000 psi). We found that this advanced facility would produce hydrogen at costs that were approximately half those associated with contemporary-technology nuclear electrolysis: $5.36 versus $10.86/million Btu, respectively. The nuclear-heat-to-hydrogen-energy conversion efficiency for the advanced system was estimated as 43%, versus 25% for the contemporary system.

  19. 78 FR 78366 - Draft Generic Drug User Fee Act Information Technology Plan; Availability for Comment

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-26

    ...] Draft Generic Drug User Fee Act Information Technology Plan; Availability for Comment AGENCY: Food and... the availability for public comment of the draft information technology (IT) plan entitled ``GDUFA Information Technology Plan.'' This plan is intended to provide FDA's approach for enhancing business...

  20. An Overview of Reactor Concepts, a Survey of Reactor Designs.

    DTIC Science & Technology

    1985-02-01

    may be very different. HTGRs may use highly enriched uranium, thereby yielding better fuel economy and a reduc- tion of the actual core size for a...specific power level. The HTGR core may have fuel and control rods placed in graphite arrays similar to PWR core con- figuration, or they may have fuel ...rods are pulled out. A Peach Bottom core design is another HTGR design. This design is featured by the fuel pin’s ability to purge itself of fission

  1. Master Logic Diagram: An Approach to Identify Initiating Events of HTGRs

    NASA Astrophysics Data System (ADS)

    Purba, J. H.

    2018-02-01

    Initiating events of a nuclear power plant being evaluated need to be firstly identified prior to applying probabilistic safety assessment on that plant. Various types of master logic diagrams (MLDs) have been proposedforsearching initiating events of the next generation of nuclear power plants, which have limited data and operating experiences. Those MLDs are different in the number of steps or levels and different in the basis for developing them. This study proposed another type of MLD approach to find high temperature gas cooled reactor (HTGR) initiating events. It consists of five functional steps starting from the top event representing the final objective of the safety functions to the basic event representing the goal of the MLD development, which is an initiating event. The application of the proposed approach to search for two HTGR initiating events, i.e. power turbine generator trip and loss of offsite power, is provided. The results confirmed that the proposed MLD is feasiblefor finding HTGR initiating events.

  2. Determining the minimum required uranium carbide content for HTGR UCO fuel kernels

    DOE PAGES

    McMurray, Jacob W.; Lindemer, Terrence B.; Brown, Nicholas R.; ...

    2017-03-10

    There are three important failure mechanisms that must be controlled in high-temperature gas-cooled reactor (HTGR) fuel for certain higher burnup applications are SiC layer rupture, SiC corrosion by CO, and coating compromise from kernel migration. All are related to high CO pressures stemming from free O generated when uranium present as UO 2 fissions and the O is not subsequently bound by other elements. Furthermore, in the HTGR UCO kernel design, CO buildup from excess O is controlled by the inclusion of additional uranium in the form of a carbide, UC x. An approach for determining the minimum UC xmore » content to ensure negligible CO formation was developed and demonstrated using CALPHAD models and the Serpent 2 reactor physics and depletion analysis tool. Our results are intended to be more accurate than previous estimates by including more nuclear and chemical factors, in particular the effect of transmutation products on the oxygen distribution as the fuel kernel composition evolves with burnup.« less

  3. Technology requirements for a generic aerocapture system. [for atmospheric entry

    NASA Technical Reports Server (NTRS)

    Cruz, M. I.

    1980-01-01

    The technology requirements for the design of a generic aerocapture vehicle system are summarized. These spacecraft have the capability of completely eliminating fuel-costly retropropulsion for planetary orbit capture through a single aerodynamically controlled atmospheric braking pass from a hyperbolic trajectory into a near circular orbit. This generic system has application at both the inner and outer planets. Spacecraft design integration, navigation, communications, and aerothermal protection system design problems were assessed in the technology requirements study and are discussed in this paper.

  4. Generic Verification Protocol for Testing Pesticide Application Spray Drift Reduction Technologies for Row and Field Crops

    EPA Pesticide Factsheets

    This generic verification protocol provides a detailed method to conduct and report results from a verification test of pesticide application technologies that can be used to evaluate these technologies for their potential to reduce spray drift.

  5. Development of a coolant channel helium and nitrogen gas ratio sensor for a high temperature gas reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cadell, S. R.; Woods, B. G.

    2012-07-01

    To measure the changing gas composition of the coolant during a postulated High Temperature Gas Reactor (HTGR) accident, an instrument is needed. This instrument must be compact enough to measure the ratio of the coolant versus the break gas in an individual coolant channel. This instrument must minimally impact the fluid flow and provide for non-direct signal routing to allow minimal disturbance to adjacent channels. The instrument must have a flexible geometry to allow for the measurement of larger volumes such as in the upper or lower plenum of a HTGR. The instrument must be capable of accurately functioning throughmore » the full operating temperature and pressure of a HTGR. This instrument is not commercially available, but a literature survey has shown that building off of the present work on Capacitance Sensors and Cross-Capacitors will provide a basis for the development of the desired instrument. One difficulty in developing and instrument to operate at HTGR temperatures is acquiring an electrical conductor that will not melt at 1600 deg. C. This requirement limits the material selection to high temperature ceramics, graphite, and exotic metals. An additional concern for the instrument is properly accounting for the thermal expansion of both the sensing components and the gas being measured. This work covers the basic instrument overview with a thorough discussion of the associated uncertainty in making these measurements. (authors)« less

  6. Results for Phase I of the IAEA Coordinated Research Program on HTGR Uncertainties

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Strydom, Gerhard; Bostelmann, Friederike; Yoon, Su Jong

    2015-01-01

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied. High Temperature Gas-cooled Reactors (HTGR) has its own peculiarities, coated particle design, large graphite quantities, different materials and high temperatures that also require other simulationmore » requirements. The IAEA has therefore launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modeling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the HTR-PM (INET, China). This report summarizes the contributions of the HTGR Methods Simulation group at Idaho National Laboratory (INL) up to this point of the CRP. The activities at INL have been focused so far on creating the problem specifications for the prismatic design, as well as providing reference solutions for the exercises defined for Phase I. An overview is provided of the HTGR UAM objectives and scope, and the detailed specifications for Exercises I-1, I-2, I-3 and I-4 are also included here for completeness. The main focus of the report is the compilation and discussion of reference results for Phase I (i.e. for input parameters at their nominal or best-estimate values), which is defined as the first step of the uncertainty quantification process. These reference results can be used by other CRP participants for comparison with other codes or their own reference results. The status on the Monte Carlo modeling of the experimental VHTRC facility is also discussed. Reference results were obtained for the neutronics stand-alone cases (Ex. I-1 and Ex. I-2) using the (relatively new) Monte Carlo code Serpent, and comparisons were performed with the more established Monte Carlo codes MCNP and KENO-VI. For the thermal-fluids stand-alone cases (Ex. I-3 and I-4) the commercial CFD code CFX was utilized to obtain reference results that can be compared with lower fidelity tools.« less

  7. Generic Verification Protocol for Testing Pesticide Application Spray Drift Reduction Technologies for Row and Field Crops (Version 1.4)

    EPA Science Inventory

    This generic verification protocol provides a detailed method for conducting and reporting results from verification testing of pesticide application technologies. It can be used to evaluate technologies for their potential to reduce spray drift, hence the term “drift reduction t...

  8. Technology to Enhance Mathematics and Science Instruction: Changes in Teacher Perceptions after Participating in a Yearlong Professional Development Program

    ERIC Educational Resources Information Center

    Kersaint, Gladis; Ritzhaupt, Albert D.; Liu, Feng

    2014-01-01

    The purpose of this study is to examine the extent to which teachers of mathematics or science who were engaged in a year-long initiative to help them integrate technological tools were (a) familiar with generic and mathematics- or science-specific technology, (b) comfortable integrating generic and content-specific technology, (c) believe that…

  9. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Richards, Matt; Hamilton, Chris

    This report provides supplemental information to the assessment of target markets provided in Appendix A of the 2012 Next Generation Nuclear Plant (NGNP) Industry Alliance (NIA) business plan [NIA 2012] for deployment of High Temperature Gas-Cooled Reactors (HTGRs) in the 2025 – 2050 time frame. This report largely reiterates the [NIA 2012] assessment for potential deployment of 400 to 800 HTGR modules (100 to 200 HTGR plants with 4 reactor modules) in the 600-MWt class in North America by 2050 for electricity generation, co-generation of steam and electricity, oil sands operations, hydrogen production, and synthetic fuels production (e.g., coal tomore » liquids). As the result of increased natural gas supply from hydraulic fracturing, the current and historically low prices of natural gas remain a significant barrier to deployment of HTGRs and other nuclear reactor concepts in the U.S. However, based on U.S. Department of Energy (DOE) Energy Information Agency (EIA) data, U.S. natural gas prices are expected to increase by the 2030 – 2040 timeframe when a significant number of HTGR modules could be deployed. An evaluation of more recent EIA 2013 data confirms the assumptions in [NIA 2012] of future natural gas prices in the range of approximately $7/MMBtu to $10/MMBtu during the 2030 – 2040 timeframe. Natural gas prices in this range will make HTGR energy prices competitive with natural gas, even in the absence of carbon-emissions penalties. Exhibit ES-1 presents the North American projections in each market segment including a characterization of the market penetration logic. Adjustments made to the 2012 data (and reflected in Exhibit ES-1) include normalization to the slightly larger 625MWt reactor module, segregation between steam cycle and more advanced (higher outlet temperature) modules, and characterization of U.S. synthetic fuel process applications as a separate market segment.« less

  10. GENERIC VERIFICATION PROTOCOL FOR THE VERIFICATION OF PESTICIDE SPRAY DRIFT REDUCTION TECHNOLOGIES FOR ROW AND FIELD CROPS

    EPA Science Inventory

    This ETV program generic verification protocol was prepared and reviewed for the Verification of Pesticide Drift Reduction Technologies project. The protocol provides a detailed methodology for conducting and reporting results from a verification test of pesticide drift reductio...

  11. 'CHEATS': a generic information communication technology (ICT) evaluation framework.

    PubMed

    Shaw, Nicola T

    2002-05-01

    This paper describes a generic framework for the evaluation of information communication technologies. This framework, CHEATS, utilises both qualitative and quantitative research methods and has proved appropriate in multiple clinical settings including telepsychiatry, teledermatology and teleeducation. The paper demonstrates how a multidisciplinary approach is essential when evaluating new and emerging technologies, particularly when such systems are implemented in real service as opposed to a research setting.

  12. 76 FR 11498 - Submission for OMB Review; Comment Request; Generic Submission of Technology Transfer Center (TTC...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-02

    ...; Comment Request; Generic Submission of Technology Transfer Center (TTC) External Customer Satisfaction... Transfer Center (TTC) External Customer Satisfaction Surveys (NCI). Type of Information Collection Request... information on the satisfaction of TTC's external customers with TTC customer services; collect information of...

  13. 76 FR 45573 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-29

    ... Technology Research Center survey. Abstract: The information collection activity will garner qualitative.... This type of generic clearance for qualitative information will not be used for quantitative... Collection; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service...

  14. Technical analysis of US Army Weapons Systems and related advanced technologies of military interest. Final report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    NONE

    1991-06-14

    This report summarizes the activities and accomplishments of an US Army technology security project designed to identify and develop effective policy guidelines for militarily critical technologies in specific Army systems and in broad generic technology areas of military interest, Individual systems analyses are documented in separate Weapons Systems Technical Assessments (WSTAs) and the general generic technology areas are evaluated in the Advanced Technology Assessment Reports (ATARs), However, specific details of these assessments are not addressed here, only recommendations regarding aspects of the defined approach, methodology, and format are provided and discussed.

  15. Implementation and Evaluation of Multiple Adaptive Control Technologies for a Generic Transport Aircraft Simulation

    NASA Technical Reports Server (NTRS)

    Campbell, Stefan F.; Kaneshige, John T.; Nguyen, Nhan T.; Krishakumar, Kalmanje S.

    2010-01-01

    Presented here is the evaluation of multiple adaptive control technologies for a generic transport aircraft simulation. For this study, seven model reference adaptive control (MRAC) based technologies were considered. Each technology was integrated into an identical dynamic-inversion control architecture and tuned using a methodology based on metrics and specific design requirements. Simulation tests were then performed to evaluate each technology s sensitivity to time-delay, flight condition, model uncertainty, and artificially induced cross-coupling. The resulting robustness and performance characteristics were used to identify potential strengths, weaknesses, and integration challenges of the individual adaptive control technologies

  16. ICP-MS measurement of silver diffusion coefficient in graphite IG-110 between 1048K and 1284K

    NASA Astrophysics Data System (ADS)

    Carter, L. M.; Seelig, J. D.; Brockman, J. D.; Robertson, J. D.; Loyalka, S. K.

    2018-01-01

    Silver-110m has been shown to permeate intact silicon carbide and pyrolytic carbon coating layers of the TRISO fuel particles during normal High Temperature Gas-Cooled Reactor (HTGR) operational conditions. The diffusion coefficients for silver in graphite IG-110 measured using a release method designed to simulate HTGR conditions of high temperature and flowing helium in the temperature range 1048-1253 K are reported. The measurements were made using spheres milled from IG-110 graphite that were infused with silver using a pressure vessel technique. The Ag diffusion was measured using a time release technique with an ICP-MS instrument for detection. The results of this work are:

  17. HTGR plant availability and reliability evaluations. Volume I. Summary of evaluations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Cadwallader, G.J.; Hannaman, G.W.; Jacobsen, F.K.

    1976-12-01

    The report (1) describes a reliability assessment methodology for systematically locating and correcting areas which may contribute to unavailability of new and uniquely designed components and systems, (2) illustrates the methodology by applying it to such components in a high-temperature gas-cooled reactor (Public Service Company of Colorado's Fort St. Vrain 330-MW(e) HTGR), and (3) compares the results of the assessment with actual experience. The methodology can be applied to any component or system; however, it is particularly valuable for assessments of components or systems which provide essential functions, or the failure or mishandling of which could result in relatively largemore » economic losses.« less

  18. Generic ICT Skills Profiles: Future Skills for Tomorrow's World.

    ERIC Educational Resources Information Center

    International Co-operation Europe Ltd. (ICEL), Brussels, Belgium.

    This document describes generic skills profiles relevant to key jobs in information and communications technology (ICT). The profiles cover the main job areas for which the ICT industry is experiencing skills shortages. These types of information are provided for 18 generic job profiles: job description (vision, role, lifestyle); examples of job…

  19. Irradiation performance of HTGR fuel rods in HFIR experiments HRB-7 and -8

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Valentine, K.H.; Homan, F.J.; Long, E.L. Jr.

    1977-05-01

    The HRB-7 and -8 experiments were designed as a comprehensive test of mixed thorium-uranium oxide fissile particles with Th:U ratios from 0 to 8 for HTGR recycle application. In addition, fissile particles derived from Weak-Acid Resin (WAR) were tested as a potential backup type of fissile particle for HTGR recycle. These experiments were conducted at two temperatures (1250 and 1500/sup 0/C) to determine the influence of operating temperature on the performance parameters studied. The minor objectives were comparison of advanced coating designs where ZrC replaced SiC in the Triso design, testing of fuel coated in laboratory-scale equipment with fuel coatedmore » in production-scale coaters, comparison of the performance of /sup 233/U-bearing particles with that of /sup 235/U-bearing particles, comparison of the performance of Biso coatings with Triso coatings for particles containing the same type of kernel, and testing of multijunction tungsten-rhenium thermocouples. All objectives were accomplished. As a result of these experiments the mixed thorium-uranium oxide fissile kernel was replaced by a WAR-derived particle in the reference recycle design. A tentative decision to make this change had been reached before the HRB-7 and -8 capsules were examined, and the results of the examination confirmed the accuracy of the previous decision. Even maximum dilution (Th/U approximately equal to 8) of the mixed thorium-uranium oxide kernel was insufficient to prevent amoeba of the kernels at rates that are unacceptable in a large HTGR. Other results showed the performance of /sup 233/U-bearing particles to be identical to that of /sup 235/U-bearing particles, the performance of fuel coated in production-scale equipment to be at least as good as that of fuel coated in laboratory-scale coaters, the performance of ZrC coatings to be very promising, and Biso coatings to be inferior to Triso coatings relative to fission product retention.« less

  20. Assuring Quality in Promoting Generic Skills in the Higher College of Technology (HCT), Muscat: Challenges & Realities

    ERIC Educational Resources Information Center

    Ali, Holi Ibrahim Holi

    2012-01-01

    This paper explores EFL teachers' perceptions in relation to the pedagogical and conceptual challenges that they face in promoting generic skills in the Higher College of Technology (HCT), Muscat, in the context of post foundation level provision. A questionnaire was administered to 17 EFL teachers at HCT, at post foundation levels to investigate…

  1. Fabrication methods and anisotropic properties of graphite matrix compacts for use in HTGR

    NASA Astrophysics Data System (ADS)

    Yeo, Sunghwan; Yun, Jihae; Kim, Sungok; Cho, Moon Sung; Lee, Young-Woo

    2018-02-01

    This study investigated the anisotropic microstructural, mechanical, and thermal properties of fabricated graphite matrix prismatic compacts for High Temperature Gas Cooled Reactor (HTGR) fuel. When the observed alignment of graphite grains and the coke derived from phenolic resin is in the transverse direction, the result is severely anisotropic thermal properties. Compacts with such orientation in the transverse direction exhibited increases of thermal expansion and conductivity up to 5.8 times and 4.82 times, respectively, more than those in the axial direction. The formation of pores due to the pyrolysis of phenolic resin was observed predominantly on upper region of the fabricated compacts. This anisotropic pore formation created anisotropic Vickers hardness on the planes with different directions.

  2. GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS OBTAINED BY USE OF ALTERNATIVE OR REFORMULATED LIQUID FUELS, FUEL ADDITIVES, FUEL EMULSIONS AND LUBRICANTS FOR HIGHWAY AND NONROAD USE DISEL ENGINES AND LIGHT DUTY GASOLINE ENGINES AND VEHICLES

    EPA Science Inventory

    This report sets standards by which the emissions reduction provided by fuel and lubricant technologies can be tested and be tested in a comparable way. It is a generic protocol under the Environmental Technology Verification program.

  3. AGR-1 Compact 1-3-1 Post-Irradiation Examination Results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Demkowicz, Paul Andrew

    The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program was established to perform the requisite research and development on tristructural isotropic (TRISO) coated particle fuel to support deployment of a high-temperature gas-cooled reactor (HTGR). The work continues as part of the Advanced Reactor Technologies (ART) TRISO Fuel program. The overarching program goal is to provide a baseline fuel qualification data set to support licensing and operation of an HTGR. To achieve these goals, the program includes the elements of fuel fabrication, irradiation, post-irradiation examination (PIE) and safety testing, fuel performance modeling, and fission product transport (INL 2015). A seriesmore » of fuel irradiation experiments is being planned and conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). These experiments will provide data on fuel performance under irradiation, support fuel process development, qualify the fuel for normal operating conditions, provide irradiated fuel for safety testing, and support the development of fuel performance and fission product transport models. The first of these irradiation tests, designated AGR-1, began in the ATR in December 2006 and ended in November 2009. This experiment was conducted primarily to act as a shakedown test of the multicapsule test train design and provide early data on fuel performance for use in fuel fabrication process development. It also provided samples for post-irradiation safety testing, where fission product retention of the fuel at high temperatures will be experimentally measured. The capsule design and details of the AGR-1 experiment have been presented previously (Grover, Petti, and Maki 2010, Maki 2009).« less

  4. AGR-1 Compact 5-3-1 Post-Irradiation Examination Results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Demkowicz, Paul; Harp, Jason; Winston, Phil

    The Advanced Gas Reactor (AGR) Fuel Development and Qualification Program was established to perform the requisite research and development on tristructural isotropic (TRISO) coated particle fuel to support deployment of a high-temperature gas-cooled reactor (HTGR). The work continues as part of the Advanced Reactor Technologies (ART) TRISO Fuel program. The overarching program goal is to provide a baseline fuel qualification data set to support licensing and operation of an HTGR. To achieve these goals, the program includes the elements of fuel fabrication, irradiation, post-irradiation examination (PIE) and safety testing, fuel performance, and fission product transport (INL 2015). A series ofmore » fuel irradiation experiments is being planned and conducted in the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL). These experiments will provide data on fuel performance under irradiation, support fuel process development, qualify the fuel for normal operating conditions, provide irradiated fuel for safety testing, and support the development of fuel performance and fission product transport models. The first of these irradiation tests, designated AGR-1, began in the ATR in December 2006 and ended in November 2009. This experiment was conducted primarily to act as a shakedown test of the multicapsule test train design and provide early data on fuel performance for use in fuel fabrication process development. It also provided samples for post-irradiation safety testing, where fission product retention of the fuel at high temperatures will be experimentally measured. The capsule design and details of the AGR-1 experiment have been presented previously.« less

  5. Station Blackout Analysis of HTGR-Type Experimental Power Reactor

    NASA Astrophysics Data System (ADS)

    Syarip; Zuhdi, Aliq; Falah, Sabilul

    2018-01-01

    The National Nuclear Energy Agency of Indonesia has decided to build an experimental power reactor of high-temperature gas-cooled reactor (HTGR) type located at Puspiptek Complex. The purpose of this project is to demonstrate a small modular nuclear power plant that can be operated safely. One of the reactor safety characteristics is the reliability of the reactor to the station blackout (SBO) event. The event was observed due to relatively high disturbance frequency of electricity network in Indonesia. The PCTRAN-HTR functional simulator code was used to observe fuel and coolant temperature, and coolant pressure during the SBO event. The reactor simulated at 10 MW for 7200 s then the SBO occurred for 1-3 minutes. The analysis result shows that the reactor power decreases automatically as the temperature increase during SBO accident without operator’s active action. The fuel temperature increased by 36.57 °C every minute during SBO and the power decreased by 0.069 MW every °C fuel temperature rise at the condition of anticipated transient without reactor scram. Whilst, the maximum coolant (helium) temperature and pressure are 1004 °C and 9.2 MPa respectively. The maximum fuel temperature is 1282 °C, this value still far below the fuel temperature limiting condition i.e. 1600 °C, its mean that the HTGR has a very good inherent safety system.

  6. Generic Verification Protocol for Verification of Online Turbidimeters

    EPA Science Inventory

    This protocol provides generic procedures for implementing a verification test for the performance of online turbidimeters. The verification tests described in this document will be conducted under the Environmental Technology Verification (ETV) Program. Verification tests will...

  7. Overview of NASA Lewis Research Center free-piston Stirling engine activities

    NASA Technical Reports Server (NTRS)

    Slaby, J. G.

    1984-01-01

    A generic free-piston Stirling technology project is being conducted to develop technologies generic to both space power and terrestrial heat pump applications in a cooperative, cost-shared effort. The generic technology effort includes extensive parametric testing of a 1 kW free-piston Stirling engine (RE-1000), development of a free-piston Stirling performance computer code, design and fabrication under contract of a hydraulic output modification for RE-1000 engine tests, and a 1000-hour endurance test, under contract, of a 3 kWe free-piston Stirling/alternator engine. A newly initiated space power technology feasibility demonstration effort addresses the capability of scaling a free-piston Stirling/alternator system to about 25 kWe; developing thermodynamic cycle efficiency or equal to 70 percent of Carnot at temperature ratios in the order of 1.5 to 2.0; achieving a power conversion unit specific weight of 6 kg/kWe; operating with noncontacting gas bearings; and dynamically balancing the system. Planned engine and component design and test efforts are described.

  8. Mathematical Modeling Of Life-Support Systems

    NASA Technical Reports Server (NTRS)

    Seshan, Panchalam K.; Ganapathi, Balasubramanian; Jan, Darrell L.; Ferrall, Joseph F.; Rohatgi, Naresh K.

    1994-01-01

    Generic hierarchical model of life-support system developed to facilitate comparisons of options in design of system. Model represents combinations of interdependent subsystems supporting microbes, plants, fish, and land animals (including humans). Generic model enables rapid configuration of variety of specific life support component models for tradeoff studies culminating in single system design. Enables rapid evaluation of effects of substituting alternate technologies and even entire groups of technologies and subsystems. Used to synthesize and analyze life-support systems ranging from relatively simple, nonregenerative units like aquariums to complex closed-loop systems aboard submarines or spacecraft. Model, called Generic Modular Flow Schematic (GMFS), coded in such chemical-process-simulation languages as Aspen Plus and expressed as three-dimensional spreadsheet.

  9. High temperature gas-cooled reactor (HTGR) graphite pebble fuel: Review of technologies for reprocessing

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mcwilliams, A. J.

    2015-09-08

    This report reviews literature on reprocessing high temperature gas-cooled reactor graphite fuel components. A basic review of the various fuel components used in the pebble bed type reactors is provided along with a survey of synthesis methods for the fabrication of the fuel components. Several disposal options are considered for the graphite pebble fuel elements including the storage of intact pebbles, volume reduction by separating the graphite from fuel kernels, and complete processing of the pebbles for waste storage. Existing methods for graphite removal are presented and generally consist of mechanical separation techniques such as crushing and grinding chemical techniquesmore » through the use of acid digestion and oxidation. Potential methods for reprocessing the graphite pebbles include improvements to existing methods and novel technologies that have not previously been investigated for nuclear graphite waste applications. The best overall method will be dependent on the desired final waste form and needs to factor in the technical efficiency, political concerns, cost, and implementation.« less

  10. Impact of end effector technology on telemanipulation performance

    NASA Technical Reports Server (NTRS)

    Bejczy, A. K.; Szakaly, Z.; Ohm, T.

    1990-01-01

    Generic requirements for end effector design are briefly summarized as derived from generic functional and operational requirements. Included is a brief summary of terms and definitions related to end effector technology. The second part contains a brief overview of end effector technology work as JPL during the past ten years, with emphasis on the evolution of new mechanical, sensing and control capabilities of end effectors. The third and major part is devoted to the description of current end effector technology. The ongoing work addresses mechanical, sensing and control details with emphasis on mechanical ruggedness, increased resolution in sensing, and close electronic and control integration with overall telemanipulator control system.

  11. Closed Brayton Cycle power system with a high temperature pellet bed reactor heat source for NEP applications

    NASA Technical Reports Server (NTRS)

    Juhasz, Albert J.; El-Genk, Mohamed S.; Harper, William B., Jr.

    1992-01-01

    Capitalizing on past and future development of high temperature gas reactor (HTGR) technology, a low mass 15 MWe closed gas turbine cycle power system using a pellet bed reactor heating helium working fluid is proposed for Nuclear Electric Propulsion (NEP) applications. Although the design of this directly coupled system architecture, comprising the reactor/power system/space radiator subsystems, is presented in conceptual form, sufficient detail is included to permit an assessment of overall system performance and mass. Furthermore, an attempt is made to show how tailoring of the main subsystem design characteristics can be utilized to achieve synergistic system level advantages that can lead to improved reliability and enhanced system life while reducing the number of parasitic load driven peripheral subsystems.

  12. Integrating Nuclear Energy to Oilfield Operations – Two Case Studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Eric P. Robertson; Lee O. Nelson; Michael G. McKellar

    2011-11-01

    Fossil fuel resources that require large energy inputs for extraction, such as the Canadian oil sands and the Green River oil shale resource in the western USA, could benefit from the use of nuclear power instead of power generated by natural gas combustion. This paper discusses the technical and economic aspects of integrating nuclear energy with oil sands operations and the development of oil shale resources. A high temperature gas reactor (HTGR) that produces heat in the form of high pressure steam (no electricity production) was selected as the nuclear power source for both fossil fuel resources. Both cases weremore » based on 50,000 bbl/day output. The oil sands case was a steam-assisted, gravity-drainage (SAGD) operation located in the Canadian oil sands belt. The oil shale development was an in-situ oil shale retorting operation located in western Colorado, USA. The technical feasibility of the integrating nuclear power was assessed. The economic feasibility of each case was evaluated using a discounted cash flow, rate of return analysis. Integrating an HTGR to both the SAGD oil sands operation and the oil shale development was found to be technically feasible for both cases. In the oil sands case, integrating an HTGR eliminated natural gas combustion and associated CO2 emissions, although there were still some emissions associated with imported electrical power. In the in situ oil shale case, integrating an HTGR reduced CO2 emissions by 88% and increased natural gas production by 100%. Economic viabilities of both nuclear integrated cases were poorer than the non-nuclear-integrated cases when CO2 emissions were not taxed. However, taxing the CO2 emissions had a significant effect on the economics of the non-nuclear base cases, bringing them in line with the economics of the nuclear-integrated cases. As we move toward limiting CO2 emissions, integrating non-CO2-emitting energy sources to the development of energy-intense fossil fuel resources is becoming increasingly important. This paper attempts to reduce the barriers that have traditionally separated fossil fuel development and application of nuclear power and to promote serious discussion of ideas about hybrid energy systems.« less

  13. GENERIC VERIFICATION PROTOCOL FOR AQUEOUS CLEANER RECYCLING TECHNOLOGIES

    EPA Science Inventory

    This generic verification protocol has been structured based on a format developed for ETV-MF projects. This document describes the intended approach and explain plans for testing with respect to areas such as test methodology, procedures, parameters, and instrumentation. Also ...

  14. (abstract) Generic Modeling of a Life Support System for Process Technology Comparisons

    NASA Technical Reports Server (NTRS)

    Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

    1993-01-01

    This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support systems and process technology options for a Lunar Base and a Mars Exploration Mission.

  15. GENERIC VERIFICATION PROTOCOL: DISTRIBUTED GENERATION AND COMBINED HEAT AND POWER FIELD TESTING PROTOCOL

    EPA Science Inventory

    This report is a generic verification protocol by which EPA’s Environmental Technology Verification program tests newly developed equipment for distributed generation of electric power, usually micro-turbine generators and internal combustion engine generators. The protocol will ...

  16. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Mohamed Abdelrahman; roger Haggard; Wagdy Mahmoud

    The final goal of this project was the development of a system that is capable of controlling an industrial process effectively through the integration of information obtained through intelligent sensor fusion and intelligent control technologies. The industry of interest in this project was the metal casting industry as represented by cupola iron-melting furnaces. However, the developed technology is of generic type and hence applicable to several other industries. The system was divided into the following four major interacting components: 1. An object oriented generic architecture to integrate the developed software and hardware components @. Generic algorithms for intelligent signal analysismore » and sensor and model fusion 3. Development of supervisory structure for integration of intelligent sensor fusion data into the controller 4. Hardware implementation of intelligent signal analysis and fusion algorithms« less

  17. Fission product palladium-silicon carbide interaction in htgr fuel particles

    NASA Astrophysics Data System (ADS)

    Minato, Kazuo; Ogawa, Toru; Kashimura, Satoru; Fukuda, Kousaku; Shimizu, Michio; Tayama, Yoshinobu; Takahashi, Ishio

    1990-07-01

    Interaction of fission product palladium (Pd) with the silicon carbide (SiC) layer was observed in irradiated Triso-coated uranium dioxide particles for high temperature gas-cooled reactors (HTGR) with an optical microscope and electron probe microanalyzers. The SiC layers were attacked locally or the reaction product formed nodules at the attack site. Although the main element concerned with the reaction was palladium, rhodium and ruthenium were also detected at the corroded areas in some particles. Palladium was detected on both the hot and cold sides of the particles, but the corroded areas and the palladium accumulations were distributed particularly on the cold side of the particles. The observed Pd-SiC reaction depths were analyzed on the assumption that the release of palladium from the fuel kernel controls the whole Pd-SiC reaction.

  18. Energy alternative for industry: the high-temperature gas-cooled reactor steamer

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McMain, A.T. Jr.; Blok, F.J.

    1978-04-01

    Large industrial complexes are faced with new requirements that will lead to a transition from such fluid fuels as natural gas and oil to such solid fuels as coal and uranium for supply of industrial energy. Power plants using these latter fuels will be of moderate size (800 to 1200 MW(thermal)) and will generally have the capability of co-generating electric power and process steam. A study has been made regarding use of the 840-MW(thermal) Fort St. Vrain high-temperature gas-cooled reactor (HTGR) design for industrial applications. The initial conceptual design (referred to as the HTGR Steamer) is substantially simplified relative tomore » Fort St. Vrain in that outlet helium and steam temperatures are lower and the reheat section is deleted from the steam generators. The Steamer has four independent steam generating loops producing a total of 277 kg/s (2.2 x 10/sup 6/ lb/h) of prime steam at 4.5 MPa/672 K (650 psia/750/sup 0/F). The unit co-generates 46 MW(electric) and provides process steam at 8.31 MPa/762 K(1200 psia/912/sup 0/F). The basic configuration and much of the equipment are retained from the Fort St. Vrain design. The system has inherent safety features important for industrial applications. These and other features indicate that the HTGR Steamer is an industrial energy option deserving additional evaluation. Subsequent work will focus on parallel design optimization and application studies.« less

  19. 49 CFR 268.11 - Project eligibility standards.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MAGNETIC LEVITATION TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM... from the technology (e.g. energy consumption compared to other transportation options); generic noise...

  20. 49 CFR 268.11 - Project eligibility standards.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MAGNETIC LEVITATION TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM... from the technology (e.g. energy consumption compared to other transportation options); generic noise...

  1. 49 CFR 268.11 - Project eligibility standards.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MAGNETIC LEVITATION TRANSPORTATION TECHNOLOGY DEPLOYMENT PROGRAM... from the technology (e.g. energy consumption compared to other transportation options); generic noise...

  2. Analyzing the impact of reactive transport on the repository performance of TRISO fuel

    NASA Astrophysics Data System (ADS)

    Schmidt, Gregory

    One of the largest determiners of the amount of electricity generated by current nuclear reactors is the efficiency of the thermodynamic cycle used for power generation. Current light water reactors (LWR) have an efficiency of 35% or less for the conversion of heat energy generated by the reactor to electrical energy. If this efficiency could be improved, more power could be generated from equivalent volumes of nuclear fuel. One method of improving this efficiency is to use a coolant flow that operates at a much higher temperature for electricity production. A reactor design that is currently proposed to take advantage of this efficiency is a graphite-moderated, helium-cooled reactor known as a High Temperature Gas Reactor (HTGR). There are significant differences between current LWR's and the proposed HTGR's but most especially in the composition of the nuclear fuel. For LWR's, the fuel elements consist of pellets of uranium dioxide or plutonium dioxide that are placed in long tubes made of zirconium metal alloys. For HTGR's, the fuel, known as TRISO (TRIstructural-ISOtropic) fuel, consists of an inner sphere of fissile material, a layer of dense pyrolytic carbon (PyC), a ceramic layer of silicon carbide (SiC) and a final dense outer layer of PyC. These TRISO particles are then compacted with graphite into fuel rods that are then placed in channels in graphite blocks. The blocks are then arranged in an annular fashion to form a reactor core. However, this new fuel form has unanswered questions on the environmental post-burn-up behavior. The key question for current once-through fuel operations is how these large irradiated graphite blocks with spent fuel inside will behave in a repository environment. Data in the literature to answer this question is lacking, but nevertheless this is an important question that must be answered before wide-spread adoption of HTGR's could be considered. This research has focused on answering the question of how the large quantity of graphite surrounding the spent HTGR fuel will impact the release of aqueous uranium from the TRISO fuel. In order to answer this question, the sorption and partitioning behavior of uranium to graphite under a variety of conditions was investigated. Key systematic variables that were analyzed include solution pH, dissolved carbonate concentration, uranium metal concentration and ionic strength. The kinetics and desorption characteristics of uranium/graphite partitioning were studied as well. The graphite used in these experiments was also characterized by a variety of techniques and conclusions are drawn about the relevant surface chemistry of graphite. This data was then used to generate a model for the reactive transport of uranium in a graphite matrix. This model was implemented with the software code CXTFIT and validated through the use of column studies mirroring the predicted system.

  3. ORE's GENeric Evaluation SYStem: GENESYS 1988-89.

    ERIC Educational Resources Information Center

    Baenen, Nancy; And Others

    GENESYS--GENeric Evaluation SYStem--is a method of streamlining data collection and evaluation through the use of computer technology. GENESYS has allowed the Office of Research and Evaluation (ORE) of the Austin (Texas) Independent School District to evaluate a multitude of contrasting programs with limited resources. By standardizing methods and…

  4. Environmental Technology Verification Program Materials Management and Remediation Center Generic Protocol for Verification of In Situ Chemical Oxidation

    EPA Science Inventory

    The protocol provides generic procedures for implementing a verification test for the performance of in situ chemical oxidation (ISCO), focused specifically to expand the application of ISCO at manufactured gas plants with polyaromatic hydrocarbon (PAH) contamination (MGP/PAH) an...

  5. Adapting Technological Pedagogical Content Knowledge Framework to Teach Mathematics

    ERIC Educational Resources Information Center

    Getenet, Seyum Tekeher

    2017-01-01

    The technological pedagogical content knowledge framework is increasingly in use by educational technology researcher as a generic description of the knowledge requirements for teachers using technology in all subjects. This study describes the development of a mathematics specific variety of the technological pedagogical content knowledge…

  6. Irradiation performance of HTGR recycle fissile fuel

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Homan, F.J.; Long, E.L. Jr.

    1976-08-01

    The irradiation performance of candidate HTGR recycle fissile fuel under accelerated testing conditions is reviewed. Failure modes for coated-particle fuels are described, and the performance of candidate recycle fissile fuels is discussed in terms of these failure modes. The bases on which UO/sub 2/ and (Th,U)O/sub 2/ were rejected as candidate recycle fissile fuels are outlined, along with the bases on which the weak-acid resin (WAR)-derived fissile fuel was selected as the reference recycle kernel. Comparisons are made relative to the irradiation behavior of WAR-derived fuels of varying stoichiometry and conclusions are drawn about the optimum stoichiometry and the rangemore » of acceptable values. Plans for future testing in support of specification development, confirmation of the results of accelerated testing by real-time experiments, and improvement in fuel performance and reliability are described.« less

  7. Design and evaluation of a nondestructive fissile assay device for HTGR fuel samples

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    McNeany, S. R.; Knoll, R. W.; Jenkins, J. D.

    1979-02-01

    Nondestructive assay of fissile material plays an important role in nuclear fuel processing facilities. Information for product quality control, plant criticality safety, and nuclear materials accountability can be obtained from assay devices. All of this is necessary for a safe, efficient, and orderly operation of a production plant. Presented here is a design description and an operational evaluation of a device developed to nondestructively assay small samples of High-Temperature Gas-Cooled Reactor (HTGR) fuel. The measurement technique employed consists in thermal-neutron irradiation of a sample followed by pneumatic transfer to a high-efficiency neutron detector where delayed neutrons are counted. In general,more » samples undergo several irradiation and count cycles during a measurement. The total number of delayed-neutron counts accumulated is translated into grams of fissile mass through comparison with the counts accumulated in an identical irradiation and count sequence of calibration standards. Successful operation of the device through many experiments over a one-year period indicates high operational reliability. Tests of assay precision show this to be better than 0.25% for measurements of 10 min. Assay biases may be encountered if calibration standards are not representative of unknown samples, but reasonable care in construction and control of standards should lead to no more than 0.2% bias in the measurements. Nondestructive fissile assay of HTGR fuel samples by thermal-neutron irradiation and delayed-neutron detection has been demonstrated to be a rapid and accurate analysis technique. However, careful attention and control must be given to calibration standards to see that they remain representative of unknown samples.« less

  8. ENVIRONMENTAL TECHNOLOGY VERIFICATION COATINGS AND COATING EQUIPMENT PROGRAM (ETV CCEP) HIGH TRANSFER EFFICIENCE SPRAY EQUIPMENT--GENERIC VERIFICATION PROTOCOL

    EPA Science Inventory

    The Environmental Technology Verification (ETV) Program has been established to verify the performance characteristics of innovative environmental technologies and report this objective information, thus, accelerating the entrance of these new technologies into the marketplace. V...

  9. IAEA Coordinated Research Project on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Strydom, Gerhard; Bostelmann, F.

    The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of HTGR design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The predictive capability of coupled neutronics/thermal-hydraulics and depletion simulations for reactor design and safety analysis can be assessed with sensitivity analysis (SA) and uncertainty analysis (UA) methods. Uncertainty originates from errors in physical data, manufacturing uncertainties, modelling and computational algorithms. (The interested reader is referred to the large body of published SA and UA literature for a more complete overview of the various types of uncertainties, methodologies and results obtained).more » SA is helpful for ranking the various sources of uncertainty and error in the results of core analyses. SA and UA are required to address cost, safety, and licensing needs and should be applied to all aspects of reactor multi-physics simulation. SA and UA can guide experimental, modelling, and algorithm research and development. Current SA and UA rely either on derivative-based methods such as stochastic sampling methods or on generalized perturbation theory to obtain sensitivity coefficients. Neither approach addresses all needs. In order to benefit from recent advances in modelling and simulation and the availability of new covariance data (nuclear data uncertainties) extensive sensitivity and uncertainty studies are needed for quantification of the impact of different sources of uncertainties on the design and safety parameters of HTGRs. Only a parallel effort in advanced simulation and in nuclear data improvement will be able to provide designers with more robust and well validated calculation tools to meet design target accuracies. In February 2009, the Technical Working Group on Gas-Cooled Reactors (TWG-GCR) of the International Atomic Energy Agency (IAEA) recommended that the proposed Coordinated Research Program (CRP) on the HTGR Uncertainty Analysis in Modelling (UAM) be implemented. This CRP is a continuation of the previous IAEA and Organization for Economic Co-operation and Development (OECD)/Nuclear Energy Agency (NEA) international activities on Verification and Validation (V&V) of available analytical capabilities for HTGR simulation for design and safety evaluations. Within the framework of these activities different numerical and experimental benchmark problems were performed and insight was gained about specific physics phenomena and the adequacy of analysis methods.« less

  10. The Role of Condition-Specific Preference-Based Measures in Health Technology Assessment.

    PubMed

    Rowen, Donna; Brazier, John; Ara, Roberta; Azzabi Zouraq, Ismail

    2017-12-01

    A condition-specific preference-based measure (CSPBM) is a measure of health-related quality of life (HRQOL) that is specific to a certain condition or disease and that can be used to obtain the quality adjustment weight of the quality-adjusted life-year (QALY) for use in economic models. This article provides an overview of the role and the development of CSPBMs, and presents a description of existing CSPBMs in the literature. The article also provides an overview of the psychometric properties of CSPBMs in comparison with generic preference-based measures (generic PBMs), and considers the advantages and disadvantages of CSPBMs in comparison with generic PBMs. CSPBMs typically include dimensions that are important for that condition but may not be important across all patient groups. There are a large number of CSPBMs across a wide range of conditions, and these vary from covering a wide range of dimensions to more symptomatic or uni-dimensional measures. Psychometric evidence is limited but suggests that CSPBMs offer an advantage in more accurate measurement of milder health states. The mean change and standard deviation can differ for CSPBMs and generic PBMs, and this may impact on incremental cost-effectiveness ratios. CSPBMs have a useful role in HTA where a generic PBM is not appropriate, sensitive or responsive. However, due to issues of comparability across different patient groups and interventions, their usage in health technology assessment is often limited to conditions where it is inappropriate to use a generic PBM or sensitivity analyses.

  11. Selection and Review of Measurement Item to Study Students' Generic Skills

    ERIC Educational Resources Information Center

    Mokhtar, Seri Bunian; Rahman, Saemah; Mokhtar, Seri Intan; Husain, Mohd Yusof

    2012-01-01

    This study was carried out to review the GS (generic skills) instruments used for engineering students. A total of 455 respondents were involved in this study. The variables presented in this study were the information management skills, communication skill, team working skill, problem-solving skill, lifelong learning skill, technology utilization…

  12. Generic Protocol for the Verification of Ballast Water Treatment Technology

    EPA Science Inventory

    In anticipation of the need to address performance verification and subsequent approval of new and innovative ballast water treatment technologies for shipboard installation, the U.S Coast Guard and the Environmental Protection Agency‘s Environmental Technology Verification Progr...

  13. 40 CFR 63.1108 - Compliance with standards and operation and maintenance requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... operation and maintenance requirements. 63.1108 Section 63.1108 Protection of Environment ENVIRONMENTAL... Source Categories: Generic Maximum Achievable Control Technology Standards § 63.1108 Compliance with..., air pollution control technologies, recovery technologies, work practices, pollution prevention...

  14. Energy use in the marine transportation industry. Task III. Efficiency improvements. Draft report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1977-06-02

    Research and development areas that hold promise for maritime energy conservation are identified and evaluated. The methodology used is discussed in Chapter II. The technology base of the commercial marine transportation industry relating to energy usage is made up of: main propulsion plants, propulsors, hydrodynamics, vessel operations, and fuels. Fifteen specific program areas in the first four generic technologies are identified and are evaluated. An economic and energy impact analysis and technological risk assessment was performed on the specific program areas and the results are summarized in Chapter III. The first five appendices address the generic technologies. The sixth appendixmore » contains the baseline operating and cost parameters against which the 15 program areas were evaluated, and the last appendix contains sample printouts of the MTEM model used to evaluate the energy consumption and economic impacts associated with the candidate technology areas. (MCW)« less

  15. Tools for Rapid Understanding of Malware Code

    DTIC Science & Technology

    2015-05-07

    cloaking techniques. We used three malware detectors, covering a wide spectrum of detection technologies, for our experiments: VirusTotal, an online ...Analysis and Manipulation ( SCAM ), 2014. [9] Babak Yadegari, Brian Johannesmeyer, Benjamin Whitely, and Saumya Debray. A generic approach to automatic...and Manipulation ( SCAM ), 2014. [9] Babak Yadegari, Brian Johannesmeyer, Benjamin Whitely, and Saumya Debray. A generic approach to automatic

  16. ENVIRONMENTAL TECHNOLOGY VERIFICATION--GENERIC VERIFICATION PROTOCOL FOR BIOLOGICAL AND AEROSOL TESTING OF GENERAL VENTILATION AIR CLEANERS

    EPA Science Inventory

    Under EPA's Environmental Technology Verification Program, Research Triangle Institute (RTI) will operate the Air Pollution Control Technology Center to verify the filtration efficiency and bioaerosol inactivation efficiency of heating, ventilation and air conditioning air cleane...

  17. Influencers of generic drug utilization: A systematic review.

    PubMed

    Howard, Jennifer N; Harris, Ilene; Frank, Gavriella; Kiptanui, Zippora; Qian, Jingjing; Hansen, Richard

    2017-08-04

    With an increase in prescription drug spending and rising drug costs there is a need to encourage the use of generic prescription drugs. However, maximizing generic drug use is not possible without the public's positive perception and meeting their informational needs about generic drugs. Thus, improving the public's confidence in, and knowledge of generic drugs on the market is critical. The objective of this systematic review is to examine and evaluate the studies focusing on the nature and extent of key factors influencing generic drug use in the United States in order to help guide policy, education and practice interventions. Using multiple search engines and key word screening criteria, empirical studies published in English between January 1, 2005 and December 31, 2015 were identified. A qualitative synthesis of the evidence identified domains of key factors that influenced generic drug use across studies. Over 3000 citations met the key word screening criteria; 67 of these met inclusion criteria for the systematic review. Seven domains of factors that influence generic drug utilization were identified: 1) patient-related factors, 2) formulary management or cost containment, 3) healthcare policies, 4) promotional activities, 5) educational initiatives, 6) technology, and 7) physician-related factors. Patients, physicians, pharmacists, formulary managers, and policymakers play an important role in generic drug use. Understanding the factors influencing generic drug use can help guide future policy, education, and practice interventions to increase generic drug use. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Generic Stellarator-like Magnetic Fusion Reactor

    NASA Astrophysics Data System (ADS)

    Sheffield, John; Spong, Donald

    2015-11-01

    The Generic Magnetic Fusion Reactor paper, published in 1985, has been updated, reflecting the improved science and technology base in the magnetic fusion program. Key changes beyond inflation are driven by important benchmark numbers for technologies and costs from ITER construction, and the use of a more conservative neutron wall flux and fluence in modern fusion reactor designs. In this paper the generic approach is applied to a catalyzed D-D stellarator-like reactor. It is shown that an interesting power plant might be possible if the following parameters could be achieved for a reference reactor: R/ < a > ~ 4 , confinement factor, fren = 0.9-1.15, < β > ~ 8 . 0 -11.5 %, Zeff ~ 1.45 plus a relativistic temperature correction, fraction of fast ions lost ~ 0.07, Bm ~ 14-16 T, and R ~ 18-24 m. J. Sheffield was supported under ORNL subcontract 4000088999 with the University of Tennessee.

  19. Next Generation Nuclear Plant Defense-in-Depth Approach

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Edward G. Wallace; Karl N. Fleming; Edward M. Burns

    2009-12-01

    The purpose of this paper is to (1) document the definition of defense-in-depth and the pproach that will be used to assure that its principles are satisfied for the NGNP project and (2) identify the specific questions proposed for preapplication discussions with the NRC. Defense-in-depth is a safety philosophy in which multiple lines of defense and conservative design and evaluation methods are applied to assure the safety of the public. The philosophy is also intended to deliver a design that is tolerant to uncertainties in knowledge of plant behavior, component reliability or operator performance that might compromise safety. This papermore » includes a review of the regulatory foundation for defense-in-depth, a definition of defense-in-depth that is appropriate for advanced reactor designs based on High Temperature Gas-cooled Reactor (HTGR) technology, and an explanation of how this safety philosophy is achieved in the NGNP.« less

  20. Generic Modeling of a Life Support System for Process Technology Comparison

    NASA Technical Reports Server (NTRS)

    Ferrall, J. F.; Seshan, P. K.; Rohatgi, N. K.; Ganapathi, G. B.

    1993-01-01

    This paper describes a simulation model called the Life Support Systems Analysis Simulation Tool (LiSSA-ST), the spreadsheet program called the Life Support Systems Analysis Trade Tool (LiSSA-TT), and the Generic Modular Flow Schematic (GMFS) modeling technique. Results of using the LiSSA-ST and the LiSSA-TT will be presented for comparing life support system and process technology options for a Lunar Base with a crew size of 4 and mission lengths of 90 and 600 days. System configurations to minimize the life support system weight and power are explored.

  1. Generic antibiotic industries: Challenges and implied strategies with regulatory perspectives

    PubMed Central

    Venkatesh, M.; Bairavi, V. G.; Sasikumar, K. C.

    2011-01-01

    Ever since the discovery of antibiotics, the quality of human life greatly improved in the 20th century. The discovery of penicillin transformed the medicine industry and initiated a search for a better antibiotic every time resulting in several synthetic and semi-synthetic antibiotics. Beginning with the 1937 sulfa drug tragedy, the drug regulations had a parallel growth along with the antibiotics and the antibiotic-based generic Pharma industries. This review article is focused on the scenario depicting current global Pharma industries based on generic antibiotics. Several regulatory aspects involved with these industries have been discussed along with the complexity of the market, issues that could affect their growth, their struggle for quality, and their compliance with the tightened regulations. With the skyrocketing commercialization of antibiotics through generics and the leveraging technologic renaissance, generic industries are involved in providing maximum safer benefits for the welfare of the people, highlighting its need today.. PMID:21430959

  2. Overview of free-piston Stirling technology at the NASA Lewis Research Center

    NASA Technical Reports Server (NTRS)

    Slaby, J. G.

    1985-01-01

    An overview of the National Aeronautics and Space Administration (NASA) Lewis Research Center (Lewis) free-piston Stirling engine activities is presented. These activities include: (1) a generic free-piston Stirling technology project being conducted to develop technologies synergistic to both space power and terrestrial heat pump applications in a cooperative, cost-shared effort with the Department of Energy (DOE/Oak Ridge National Laboratory (ONRL)), and (2) a free-piston Stirling space-power technology demonstration project as part of the SP-100 program being conducted in support of the Department of Defense (DOD), DOE, and NASA/Lewis. The generic technology effort includes extensive parametric testing of a 1 kw free-piston Stirling engine (RE-1000), development and validation of a free-piston Stirling performance computer code, and fabrication and initial testing of an hydraulic output modification for the RE-1000 engine. The space power technology effort, under SP-100, addresses the status of the 25 kWe Space Power Demonstrator Engine (SPDE) including early test results.

  3. FINAL PROJECT REPORT - EVALUATION AND TESTING OF HTGR REACTOR BUILDING RESPONSE TO DEPRESSURIZATION ACCIDENTS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    ALLIANCE LIMITED, NGNP INDUSTRY

    This report provides a description of the project, summarizes each phase of the project, and ends with project conclusions. In addition, the report contains a descriptive index of the technical reports generated during the course of the project.

  4. Nuclear fuels status

    NASA Technical Reports Server (NTRS)

    Kania, Michael

    1991-01-01

    A discussion on coated particle fuel performance from a modular High Temperature Gas Reactor (HTGR) is presented along with experimental results. The following topics are covered: (1) the coated particle fuel concept; (2) the functional requirements; (3) performance limiting mechanisms; (4) fuel performance; and (5) methods/techniques for characterizing performance.

  5. ICP-MS measurement of iodine diffusion in IG-110 graphite for HTGR/VHTR

    NASA Astrophysics Data System (ADS)

    Carter, L. M.; Brockman, J. D.; Robertson, J. D.; Loyalka, S. K.

    2016-05-01

    Graphite functions as a structural material and as a barrier to fission product release in HTGR/VHTR designs, and elucidation of transport parameters for fission products in reactor-grade graphite is thus required for reactor source terms calculations. We measured iodine diffusion in spheres of IG-110 graphite using a release method based on Fickain diffusion kinetics. Two sources of iodine were loaded into the graphite spheres; molecular iodine (I2) and cesium iodide (CsI). Measurements of the diffusion coefficient were made over a temperature range of 873-1293 K. We have obtained the following Arrhenius expressions for iodine diffusion:DI , CsI infused =(6 ×10-12 2/s) exp(30,000 J/mol RT) And,DI , I2 infused =(4 ×10-10 m2/s) exp(-11,000 J/mol RT ) The results indicate that iodine diffusion in IG-110 graphite is not well-described by Fickan diffusion kinetics. To our knowledge, these are the first measurements of iodine diffusion in IG-110 graphite.

  6. DOE Office of Scientific and Technical Information (OSTI.GOV)

    McMurray, Jacob W.; Lindemer, Terrence B.; Brown, Nicholas R.

    There are three important failure mechanisms that must be controlled in high-temperature gas-cooled reactor (HTGR) fuel for certain higher burnup applications are SiC layer rupture, SiC corrosion by CO, and coating compromise from kernel migration. All are related to high CO pressures stemming from free O generated when uranium present as UO 2 fissions and the O is not subsequently bound by other elements. Furthermore, in the HTGR UCO kernel design, CO buildup from excess O is controlled by the inclusion of additional uranium in the form of a carbide, UC x. An approach for determining the minimum UC xmore » content to ensure negligible CO formation was developed and demonstrated using CALPHAD models and the Serpent 2 reactor physics and depletion analysis tool. Our results are intended to be more accurate than previous estimates by including more nuclear and chemical factors, in particular the effect of transmutation products on the oxygen distribution as the fuel kernel composition evolves with burnup.« less

  7. 78 FR 30930 - Proposed Collection; 60-Day Comment Request: Generic Clearance To Support Programs and...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-23

    ..., mechanical, or other technological collection techniques or other forms of information technology. To Submit... aggregate contact information, history, preferences, opinions, and/or other data that does not necessitate...

  8. Environmental Technology Verification Coatings and Coating Equipment Program (ETV CCEP) High Transfer Efficiency Spray Equipment--Generic Verification Protocol

    EPA Science Inventory

    The Environmental Technology Verification (ETV) Program has been established by the U.S. Environmental Protection Agency (EPA) to verify the performance characteristics of innovative environmental technologies across all media and report this objective information to the states, ...

  9. 77 FR 31584 - Proposed Information Collection; Comment Request; Generic Clearance for Program Evaluation Data...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-05-29

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Proposed Information... Institute of Standards and Technology (NIST), Commerce. ACTION: Notice. SUMMARY: The Department of Commerce.... Abstract In accordance with Executive Order 12862, the National Institute of Standards and Technology (NIST...

  10. 76 FR 8371 - Notice Correction; Generic Submission of Technology Transfer Center (TTC) External Customer...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-02-14

    ... Submission of Technology Transfer Center (TTC) External Customer Satisfaction Surveys (NCI) The Federal... project titled, ``Technology Transfer Center (TTC) External Customer Satisfaction Survey (NCI)'' was... will include multiple customer satisfaction surveys over the course of three years. At this time, only...

  11. Assessment of Sensor Technologies for Advanced Reactors

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Korsah, Kofi; Kisner, R. A.; Britton Jr., C. L.

    This paper provides an assessment of sensor technologies and a determination of measurement needs for advanced reactors (AdvRx). It is a summary of a study performed to provide the technical basis for identifying and prioritizing research targets within the instrumentation and control (I&C) Technology Area under the Department of Energy’s (DOE’s) Advanced Reactor Technology (ART) program. The study covered two broad reactor technology categories: High Temperature Reactors and Fast Reactors. The scope of “High temperature reactors” included Gen IV reactors whose coolant exit temperatures exceed ≈650 °C and are moderated (as opposed to fast reactors). To bound the scope formore » fast reactors, this report reviewed relevant operating experience from US-operated Sodium Fast Reactor (SFR) and relevant test experience from the Fast Flux Test Facility (FFTF). For high temperature reactors the study showed that in many cases instrumentation have performed reasonably well in research and demonstration reactors. However, even in cases where the technology is “mature” (such as thermocouples), HTGRs can benefit from improved technologies. Current HTGR instrumentation is generally based on decades-old technology and adapting newer technologies could provide significant advantages. For sodium fast reactors, the study found that several key research needs arise around (1) radiation-tolerant sensor design for in-vessel or in-core applications, where possible non-invasive sensing approaches for key parameters that minimize the need to deploy sensors in-vessel, (2) approaches to exfiltrating data from in-vessel sensors while minimizing penetrations, (3) calibration of sensors in-situ, and (4) optimizing sensor placements to maximize the information content while minimizing the number of sensors needed.« less

  12. Development Program of IS Process Pilot Test Plant for Hydrogen Production With High-Temperature Gas-Cooled Reactor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jin Iwatsuki; Atsuhiko Terada; Hiroyuki Noguchi

    2006-07-01

    At the present time, we are alarmed by depletion of fossil energy and effects on global environment such as acid rain and global warming, because our lives depend still heavily on fossil energy. So, it is universally recognized that hydrogen is one of the best energy media and its demand will be increased greatly in the near future. In Japan, the Basic Plan for Energy Supply and Demand based on the Basic Law on Energy Policy Making was decided upon by the Cabinet on 6 October, 2003. In the plan, efforts for hydrogen energy utilization were expressed as follows; hydrogenmore » is a clean energy carrier without carbon dioxide (CO{sub 2}) emission, and commercialization of hydrogen production system using nuclear, solar and biomass, not fossil fuels, is desired. However, it is necessary to develop suitable technology to produce hydrogen without CO{sub 2} emission from a view point of global environmental protection, since little hydrogen exists naturally. Hydrogen production from water using nuclear energy, especially the high-temperature gas-cooled reactor (HTGR), is one of the most attractive solutions for the environmental issue, because HTGR hydrogen production by water splitting methods such as a thermochemical iodine-sulfur (IS) process has a high possibility to produce hydrogen effectively and economically. The Japan Atomic Energy Agency (JAEA) has been conducting the HTTR (High-Temperature Engineering Test Reactor) project from the view to establishing technology base on HTGR and also on the IS process. In the IS process, raw material, water, is to be reacted with iodine (I{sub 2}) and sulfur dioxide (SO{sub 2}) to produce hydrogen iodide (HI) and sulfuric acid (H{sub 2}SO{sub 4}), the so-called Bunsen reaction, which are then decomposed endo-thermically to produce hydrogen (H{sub 2}) and oxygen (O{sub 2}), respectively. Iodine and sulfur dioxide produced in the decomposition reactions can be used again as the reactants in the Bunsen reaction. In JAEA, continuous hydrogen production was demonstrated with the hydrogen production rate of about 30 NL/hr for one week using a bench-scale test apparatus made of glass. Based on the test results and know-how obtained through the bench-scale tests, a pilot test plant that can produce hydrogen of about 30 Nm{sup 3}/hr is being designed. The test plant will be fabricated with industrial materials such as glass coated steel, SiC ceramics etc, and operated under high pressure condition up to 2 MPa. The test plant will consist of a IS process plant and a helium gas (He) circulation facility (He loop). The He loop can simulate HTTR operation conditions, which consists of a 400 kW-electric heater for He hating, a He circulator and a steam generator working as a He cooler. In parallel to the design study, key components of the IS process such as the sulfuric acid (H{sub 2}SO{sub 4}) and the sulfur trioxide (SO{sub 3}) decomposers working under-high temperature corrosive environments have been designed and test-fabricated to confirm their fabricability. Also, other R and D's are under way such as corrosion, processing of HIx solutions. This paper describes present status of these activities. (authors)« less

  13. Video Discs in Libraries.

    ERIC Educational Resources Information Center

    Barker, Philip

    1986-01-01

    Discussion of developments in information storage technology likely to have significant impact upon library utilization focuses on hardware (videodisc technology) and software developments (knowledge databases; computer networks; database management systems; interactive video, computer, and multimedia user interfaces). Three generic computer-based…

  14. Relativistic Gravitational Experiments in Space

    NASA Technical Reports Server (NTRS)

    Hellings, Ronald W. (Editor)

    1989-01-01

    The results are summarized of a workshop on future gravitational physics space missions. The purpose of the workshop was to define generic technological requirements for such missions. NASA will use the results to direct its program of advanced technology development.

  15. GENERIC VERIFICATION PROTOCOL FOR DETERMINATION OF EMISSIONS REDUCTIONS FROM SELECTIVE CATALYTIC REDUCTIONS CONTROL TECHNOLOGIES FOR HIGHWAY, NONROAD, AND STATIONARY USE DIESEL ENGINES

    EPA Science Inventory

    The protocol describes the Environmental Technology Verification (ETV) Program's considerations and requirements for verification of emissions reduction provided by selective catalytic reduction (SCR) technologies. The basis of the ETV will be comparison of the emissions and perf...

  16. Structures performance, benefit, cost-study

    NASA Technical Reports Server (NTRS)

    Woike, O. G.; Salemme, C.; Stearns, E.; Oritz, P.; Roberts, M. L.; Baughman, J. L.; Johnston, R. P.; Demel, H. F.; Stabrylla, R. G.; Coffinberry, G. A.

    1981-01-01

    New technology concepts and structural analysis development needs which could lead to improved life cycle cost for future high-bypass turbofans were studied. The NASA-GE energy efficient engine technology is used as a base to assess the concept benefits. Recommended programs are identified for attaining these generic structural and other beneficial technologies.

  17. Measuring Mathematics Teacher Educators' Knowledge of Technology Integrated Teaching: Instrument Development

    ERIC Educational Resources Information Center

    Getenet, Seyum Tekeher; Beswick, Kim

    2013-01-01

    This study describes the construction of a questionnaire instrument to measure mathematics teacher educators' knowledge for technology integrated mathematics teaching. The study was founded on a reconceptualisation of the generic Technological Pedagogical Content Knowledge framework in the specific context of mathematics teaching. Steps in the…

  18. Environmental Technology Verification: Supplement to Test/QA Plan for Biological and Aerosol Testing of General Ventilation Air Cleaners; Bioaerosol Inactivation Efficiency by HVAC In-Duct Ultraviolet Light Air Cleaners

    EPA Science Inventory

    The Air Pollution Control Technology Verification Center has selected general ventilation air cleaners as a technology area. The Generic Verification Protocol for Biological and Aerosol Testing of General Ventilation Air Cleaners is on the Environmental Technology Verification we...

  19. Coal gasification systems engineering and analysis, volume 2

    NASA Technical Reports Server (NTRS)

    1980-01-01

    The major design related features of each generic plant system were characterized in a catalog. Based on the catalog and requirements data, approximately 17 designs and cost estimates were developed for MBG and alternate products. A series of generic trade studies was conducted to support all of the design studies. A set of cost and programmatic analyses were conducted to supplement the designs. The cost methodology employed for the design and sensitivity studies was documented and implemented in a computer program. Plant design and construction schedules were developed for the K-T, Texaco, and B&W MBG plant designs. A generic work breakdown structure was prepared, based on the K-T design, to coincide with TVA's planned management approach. An extensive set of cost sensitivity analyses was completed for K-T, Texaco, and B&W design. Product price competitiveness was evaluated for MBG and the alternate products. A draft management policy and procedures manual was evaluated. A supporting technology development plan was developed to address high technology risk issues. The issues were identified and ranked in terms of importance and tractability, and a plan developed for obtaining data or developing technology required to mitigate the risk.

  20. Generic Software for Emulating Multiprocessor Architectures.

    DTIC Science & Technology

    1985-05-01

    RD-A157 662 GENERIC SOFTWARE FOR EMULATING MULTIPROCESSOR 1/2 AlRCHITECTURES(J) MASSACHUSETTS INST OF TECH CAMBRIDGE U LRS LAB FOR COMPUTER SCIENCE R...AREA & WORK UNIT NUMBERS MIT Laboratory for Computer Science 545 Technology Square Cambridge, MA 02139 ____________ I I. CONTROLLING OFFICE NAME AND...aide If neceeasy end Identify by block number) Computer architecture, emulation, simulation, dataf low 20. ABSTRACT (Continue an reverse slde It

  1. NRMRL/TTSD CUSTOMER SATISFACTION FOCUS GROUP

    EPA Science Inventory

    TTB uses a variety of technology transfer products and tools to communicate risk and information about technologies and research. TTB has begun a project to use EPA's generic Customer Satisfaction Survey Information Collection Request (ICR) to determine satisfaction with their pr...

  2. Operationally Efficient Propulsion System Study (OEPSS) data book. Volume 1: Generic ground operations data

    NASA Technical Reports Server (NTRS)

    Byrd, Raymond J.

    1990-01-01

    This study was initiated to identify operations problems and cost drivers for current propulsion systems and to identify technology and design approaches to increase the operational efficiency and reduce operations costs for future propulsion systems. To provide readily usable data for the Advance Launch System (ALS) program, the results of the Operationally Efficient Propulsion System Study (OEPSS) were organized into a series of OEPSS Data Books as follows: Volume 1, Generic Ground Operations Data; Volume 2, Ground Operations Problems; Volume 3, Operations Technology; Volume 4, OEPSS Design Concepts; and Volume 5, OEPSS Final Review Briefing, which summarizes the activities and results of the study. This volume presents ground processing data for a generic LOX/LH2 booster and core propulsion system based on current STS experience. The data presented includes: top logic diagram, process flow, activities bar-chart, loaded timelines, manpower requirements in terms of duration, headcount and skill mix per operations and maintenance instruction (OMI), and critical path tasks and durations.

  3. Generic Module for Collecting Data in Smart Cities

    NASA Astrophysics Data System (ADS)

    Martinez, A.; Ramirez, F.; Estrada, H.; Torres, L. A.

    2017-09-01

    The Future Internet brings new technologies to the common life of people, such as Internet of Things, Cloud Computing or Big Data. All this technologies have change the way people communicate and also the way the devices interact with the context, giving rise to new paradigms, as the case of smart cities. Currently, the mobile devices represent one of main sources of information for new applications that take into account the user context, such as apps for mobility, health, of security. Several platforms have been proposed that consider the development of Future Internet applications, however, no generic modules can be found that implement the collection of context data from smartphones. In this research work we present a generic module to collect data from different sensors of the mobile devices and also to send, in a standard manner, this data to the Open FIWARE Cloud to be stored or analyzed by software tools. The proposed module enables the human-as-a-sensor approach for FIWARE Platform.

  4. Using generic tool kits to build intelligent systems

    NASA Technical Reports Server (NTRS)

    Miller, David J.

    1994-01-01

    The Intelligent Systems and Robots Center at Sandia National Laboratories is developing technologies for the automation of processes associated with environmental remediation and information-driven manufacturing. These technologies, which focus on automated planning and programming and sensor-based and model-based control, are used to build intelligent systems which are able to generate plans of action, program the necessary devices, and use sensors to react to changes in the environment. By automating tasks through the use of programmable devices tied to computer models which are augmented by sensing, requirements for faster, safer, and cheaper systems are being satisfied. However, because of the need for rapid cost-effect prototyping and multi-laboratory teaming, it is also necessary to define a consistent approach to the construction of controllers for such systems. As a result, the Generic Intelligent System Controller (GISC) concept has been developed. This concept promotes the philosophy of producing generic tool kits which can be used and reused to build intelligent control systems.

  5. 40 CFR 63.1112 - Extension of compliance, and performance test, monitoring, recordkeeping and reporting waivers...

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...

  6. 40 CFR 63.1112 - Extension of compliance, and performance test, monitoring, recordkeeping and reporting waivers...

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...

  7. 40 CFR 63.1112 - Extension of compliance, and performance test, monitoring, recordkeeping and reporting waivers...

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...

  8. 40 CFR 63.1112 - Extension of compliance, and performance test, monitoring, recordkeeping and reporting waivers...

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...

  9. 40 CFR 63.1112 - Extension of compliance, and performance test, monitoring, recordkeeping and reporting waivers...

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Standards for Hazardous Air Pollutants for Source Categories: Generic Maximum Achievable Control Technology... operator of an existing source has installed best available control technology (BACT) (as defined in section 169(3) of the Act) or technology required to meet a lowest achievable emission rate (LAER) (as...

  10. 47 CFR 51.231 - Provision of information on advanced services deployment.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... the requesting carrier asserts that the technology it seeks to deploy fits within a generic power... technology, it must provide the incumbent LEC with information on the speed and power at which the signal... rejection; and (3) Information with respect to the number of loops using advanced services technology within...

  11. Artificial intelligence in a mission operations and satellite test environment

    NASA Technical Reports Server (NTRS)

    Busse, Carl

    1988-01-01

    A Generic Mission Operations System using Expert System technology to demonstrate the potential of Artificial Intelligence (AI) automated monitor and control functions in a Mission Operations and Satellite Test environment will be developed at the National Aeronautics and Space Administration (NASA) Jet Propulsion Laboratory (JPL). Expert system techniques in a real time operation environment are being studied and applied to science and engineering data processing. Advanced decommutation schemes and intelligent display technology will be examined to develop imaginative improvements in rapid interpretation and distribution of information. The Generic Payload Operations Control Center (GPOCC) will demonstrate improved data handling accuracy, flexibility, and responsiveness in a complex mission environment. The ultimate goal is to automate repetitious mission operations, instrument, and satellite test functions by the applications of expert system technology and artificial intelligence resources and to enhance the level of man-machine sophistication.

  12. Experimental demonstration of warm mix asphalt pavement on Rt. 4.

    DOT National Transportation Integrated Search

    2012-04-01

    A number of new technologies have been developed to lower the production and placement temperatures : of hot-mix asphalt (HMA). Generically, these technologies are referred to as warm-mix asphalt (WMA). : In Europe and to a lesser extent in North Ame...

  13. Spacecraft control center automation using the generic inferential executor (GENIE)

    NASA Technical Reports Server (NTRS)

    Hartley, Jonathan; Luczak, Ed; Stump, Doug

    1996-01-01

    The increasing requirement to dramatically reduce the cost of mission operations led to increased emphasis on automation technology. The expert system technology used at the Goddard Space Flight Center (MD) is currently being applied to the automation of spacecraft control center activities. The generic inferential executor (GENIE) is a tool which allows pass automation applications to be constructed. The pass script templates constructed encode the tasks necessary to mimic flight operations team interactions with the spacecraft during a pass. These templates can be configured with data specific to a particular pass. Animated graphical displays illustrate the progress during the pass. The first GENIE application automates passes of the solar, anomalous and magnetospheric particle explorer (SAMPEX) spacecraft.

  14. CMC thermal protection system for future reusable launch vehicles: Generic shingle technological maturation and tests

    NASA Astrophysics Data System (ADS)

    Pichon, T.; Barreteau, R.; Soyris, P.; Foucault, A.; Parenteau, J. M.; Prel, Y.; Guedron, S.

    2009-07-01

    Experimental re-entry demonstrators are currently being developed in Europe, with the objective of increasing the technology readiness level (TRL) of technologies applicable to future reusable launch vehicles. Among these are the Pre-X programme, currently funded by CNES, the French Space Agency, and which is about to enter into development phase B, and the IXV, within the future launcher preparatory programme (FLPP) funded by ESA. One of the major technologies necessary for such vehicles is the thermal protection system (TPS), and in particular the ceramic matrix composites (CMC) based windward TPS. In support of this goal, technology maturation activities named "generic shingle" were initiated beginning of 2003 by SPS, under a CNES contract, with the objective of performing a test campaign of a complete shingle of generic design, in preparation of the development of a re-entry experimental vehicle decided in Europe. The activities performed to date include: the design, manufacturing of two C/SiC panels, finite element model (FEM) calculation of the design, testing of technological samples extracted from a dedicated panel, mechanical pressure testing of a panel, and a complete study of the attachment system. Additional testing is currently under preparation on the panel equipped with its insulation, seal, attachment device, and representative portion of cold structure, to further assess its behaviour in environments relevant to its application The paper will present the activities that will have been performed in 2006 on the prediction and preparation of these modal characterization, dynamic, acoustic as well as thermal and thermo-mechanical tests. Results of these tests will be presented and the lessons learned will be discussed.

  15. Criticality calculations of the Very High Temperature reactor Critical Assembly benchmark with Serpent and SCALE/KENO-VI

    DOE PAGES

    Bostelmann, Friederike; Hammer, Hans R.; Ortensi, Javier; ...

    2015-12-30

    Within the framework of the IAEA Coordinated Research Project on HTGR Uncertainty Analysis in Modeling, criticality calculations of the Very High Temperature Critical Assembly experiment were performed as the validation reference to the prismatic MHTGR-350 lattice calculations. Criticality measurements performed at several temperature points at this Japanese graphite-moderated facility were recently included in the International Handbook of Evaluated Reactor Physics Benchmark Experiments, and represent one of the few data sets available for the validation of HTGR lattice physics. Here, this work compares VHTRC criticality simulations utilizing the Monte Carlo codes Serpent and SCALE/KENO-VI. Reasonable agreement was found between Serpent andmore » KENO-VI, but only the use of the latest ENDF cross section library release, namely the ENDF/B-VII.1 library, led to an improved match with the measured data. Furthermore, the fourth beta release of SCALE 6.2/KENO-VI showed significant improvements from the current SCALE 6.1.2 version, compared to the experimental values and Serpent.« less

  16. Blast Technologies

    DTIC Science & Technology

    2011-06-27

    Development Generic Hull Testing Airbag and Sensor Technology Development Blast Data Recorder Specifications and Fielding Numerical Model Improvement...seat designs, airbag and restraint systems, and energy absorbing flooring solutions  Vehicle event data recorders for collecting highly accurate...treatments.  Airbag or comparable technologies such as bolsters.  Sensors that can detect and deploy/trigger interior treatments within the timeframe of a

  17. Applications of aerospace technology in the environmental sciences

    NASA Technical Reports Server (NTRS)

    1972-01-01

    Detailed information is reported on the operations and accomplishments of the RTI Technology Application Team for the period October 11, 1971 to March 10, 1972. Mathematical models for prediction of pollutant formation during combustion are discussed along with generic areas of air pollution problems, which NASA technology offers a high potential for solving. Recommendations for future work are included.

  18. SiC layer microstructure in AGR-1 and AGR-2 TRISO fuel particles and the influence of its variation on the effective diffusion of key fission products

    DOE PAGES

    Gerczak, Tyler J.; Hunn, John D.; Lowden, Richard A.; ...

    2016-08-15

    Tristructural isotropic (TRISO) coated particle fuel is a promising fuel form for advanced reactor concepts such as high temperature gas-cooled reactors (HTGR) and is being developed domestically under the US Department of Energy’s Nuclear Reactor Technologies Initiative in support of Advanced Reactor Technologies. The fuel development and qualification plan includes a series of fuel irradiations to demonstrate fuel performance from the laboratory to commercial scale. The first irradiation campaign, AGR-1, included four separate TRISO fuel variants composed of multiple, laboratory-scale coater batches. The second irradiation campaign, AGR-2, included TRISO fuel particles fabricated by BWX Technologies with a larger coater representativemore » of an industrial-scale system. The SiC layers of as-fabricated particles from the AGR-1 and AGR-2 irradiation campaigns have been investigated by electron backscatter diffraction (EBSD) to provide key information about the microstructural features relevant to fuel performance. The results of a comprehensive study of multiple particles from all constituent batches are reported. The observations indicate that there were microstructural differences between variants and among constituent batches in a single variant. Finally, insights on the influence of microstructure on the effective diffusivity of key fission products in the SiC layer are also discussed.« less

  19. Use of warm mix asphalt pavement on Route 9, in Durham.

    DOT National Transportation Integrated Search

    2012-06-01

    A number of new technologies have been developed to lower the production and placement temperatures : of hot-mix asphalt (HMA). Generically, these technologies are referred to as warm-mix asphalt (WMA). : In Europe and to a lesser extent in North Ame...

  20. 77 FR 62216 - Submission for OMB Review; Comment Request

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-10-12

    ...: National Institute of Standards and Technology (NIST). Title: Generic Clearance for Program Evaluation Data... National Institute of Standards and Technology (NIST), a non-regulatory agency of the Department of Commerce, proposes to conduct surveys--both quantitative and qualitative--designed to evaluate our current...

  1. The Generic Resolution Advisor and Conflict Evaluator (GRACE) for Detect-And-Avoid (DAA) Systems

    NASA Technical Reports Server (NTRS)

    Abramson, Michael; Refai, Mohamad; Santiago, Confesor

    2017-01-01

    The paper describes the Generic Resolution Advisor and Conflict Evaluator (GRACE), a novel alerting and guidance algorithm that combines flexibility, robustness, and computational efficiency. GRACE is "generic" in that it makes no assumptions regarding temporal or spatial scales, aircraft performance, or its sensor and communication systems. Accordingly, GRACE is well suited to research applications where alerting and guidance is a central feature and requirements are fluid involving a wide range of aviation technologies. GRACE has been used at NASA in a number of real-time and fast-time experiments supporting evolving requirements of DAA research, including parametric studies, NAS-wide simulations, human-in-the-loop experiments, and live flight tests.

  2. A Generic Communication Protocol for Remote Laboratories: an Implementation on e-lab

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Henriques, Rafael B.; Fernandes, H.; Duarte, Andre S.

    2015-07-01

    The remote laboratories at IST (Instituto Superior Tecnico), e-lab, serve as a valuable tool for education and training based on remote control technologies. Due to the high number and increase of remotely operated experiments a generic protocol was developed to perform the communication between the software driver and the respective experimental setup in an easier and more unified way. The training in these fields of students and personnel can take advantage of such infrastructure with the purpose of deploying new experiments in a faster way. More than 10 experiments using the generic protocol are available on-line in a 24 xmore » 7 way. (authors)« less

  3. Large Deployable Reflector Science and Technology Workshop. Volume 3: Systems and Technology Assessment

    NASA Technical Reports Server (NTRS)

    Leidich, C. A. (Editor); Pittman, R. B. (Editor)

    1984-01-01

    The results of five technology panels which convened to discuss the Large Deployable Reflector (LDR) are presented. The proposed LDR is a large, ambient-temperature, far infrared/submillimeter telescope designed for space. Panel topics included optics, materials and structures, sensing and control, science instruments, and systems and missions. The telescope requirements, the estimated technology levels, and the areas in which the generic technology work has to be augmented are enumerated.

  4. System Evaluation and Economic Analysis of a HTGR Powered High-Temperature Electrolysis Hydrogen Production Plant

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Michael G. McKellar; Edwin A. Harvego; Anastasia A. Gandrik

    2010-10-01

    A design for a commercial-scale high-temperature electrolysis (HTE) plant for hydrogen production has been developed. The HTE plant is powered by a high-temperature gas-cooled reactor (HTGR) whose configuration and operating conditions are based on the latest design parameters planned for the Next Generation Nuclear Plant (NGNP). The current HTGR reference design specifies a reactor power of 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 322°C and 750°C, respectively. The power conversion unit will be a Rankine steam cycle with a power conversion efficiency of 40%. The reference hydrogen production plantmore » operates at a system pressure of 5.0 MPa, and utilizes a steam-sweep system to remove the excess oxygen that is evolved on the anode (oxygen) side of the electrolyzer. The overall system thermal-to-hydrogen production efficiency (based on the higher heating value of the produced hydrogen) is 40.4% at a hydrogen production rate of 1.75 kg/s and an oxygen production rate of 13.8 kg/s. An economic analysis of this plant was performed with realistic financial and cost estimating assumptions. The results of the economic analysis demonstrated that the HTE hydrogen production plant driven by a high-temperature helium-cooled nuclear power plant can deliver hydrogen at a cost of $3.67/kg of hydrogen assuming an internal rate of return, IRR, of 12% and a debt to equity ratio of 80%/20%. A second analysis shows that if the power cycle efficiency increases to 44.4%, the hydrogen production efficiency increases to 42.8% and the hydrogen and oxygen production rates are 1.85 kg/s and 14.6 kg/s respectively. At the higher power cycle efficiency and an IRR of 12% the cost of hydrogen production is $3.50/kg.« less

  5. The IAEA coordinated research programme on HTGR uncertainty analysis: Phase I status and Ex. I-1 prismatic reference results

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bostelmann, Friederike; Strydom, Gerhard; Reitsma, Frederik

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied, in contrast to the historical approach where sensitivity analysis were performed and uncertainties then determined by a simplified statistical combination of a few important inputmore » parameters. New methodologies are currently under development in the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity. High Temperature Gas-cooled Reactor (HTGR) designs require specific treatment of the double heterogeneous fuel design and large graphite quantities at high temperatures. The IAEA has therefore launched a Coordinated Research Project (CRP) on HTGR Uncertainty Analysis in Modelling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the Chinese HTR-PM. Work has started on the first phase and the current CRP status is reported in the paper. A comparison of the Serpent and SCALE/KENO-VI reference Monte Carlo results for Ex. I-1 of the MHTGR-350 design is also included. It was observed that the SCALE/KENO-VI Continuous Energy (CE) k ∞ values were 395 pcm (Ex. I-1a) to 803 pcm (Ex. I-1b) higher than the respective Serpent lattice calculations, and that within the set of the SCALE results, the KENO-VI 238 Multi-Group (MG) k ∞ values were up to 800 pcm lower than the KENO-VI CE values. The use of the latest ENDF-B-VII.1 cross section library in Serpent lead to ~180 pcm lower k ∞ values compared to the older ENDF-B-VII.0 dataset, caused by the modified graphite neutron capture cross section. Furthermore, the fourth beta release of SCALE 6.2 likewise produced lower CE k∞ values when compared to SCALE 6.1, and the improved performance of the new 252-group library available in SCALE 6.2 is especially noteworthy. A SCALE/TSUNAMI uncertainty analysis of the Hot Full Power variant for Ex. I-1a furthermore concluded that the 238U(n,γ) (capture) and 235U(View the MathML source) cross-section covariance matrices contributed the most to the total k ∞ uncertainty of 0.58%.« less

  6. The IAEA coordinated research programme on HTGR uncertainty analysis: Phase I status and Ex. I-1 prismatic reference results

    DOE PAGES

    Bostelmann, Friederike; Strydom, Gerhard; Reitsma, Frederik; ...

    2016-01-11

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied, in contrast to the historical approach where sensitivity analysis were performed and uncertainties then determined by a simplified statistical combination of a few important inputmore » parameters. New methodologies are currently under development in the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity. High Temperature Gas-cooled Reactor (HTGR) designs require specific treatment of the double heterogeneous fuel design and large graphite quantities at high temperatures. The IAEA has therefore launched a Coordinated Research Project (CRP) on HTGR Uncertainty Analysis in Modelling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the Chinese HTR-PM. Work has started on the first phase and the current CRP status is reported in the paper. A comparison of the Serpent and SCALE/KENO-VI reference Monte Carlo results for Ex. I-1 of the MHTGR-350 design is also included. It was observed that the SCALE/KENO-VI Continuous Energy (CE) k ∞ values were 395 pcm (Ex. I-1a) to 803 pcm (Ex. I-1b) higher than the respective Serpent lattice calculations, and that within the set of the SCALE results, the KENO-VI 238 Multi-Group (MG) k ∞ values were up to 800 pcm lower than the KENO-VI CE values. The use of the latest ENDF-B-VII.1 cross section library in Serpent lead to ~180 pcm lower k ∞ values compared to the older ENDF-B-VII.0 dataset, caused by the modified graphite neutron capture cross section. Furthermore, the fourth beta release of SCALE 6.2 likewise produced lower CE k∞ values when compared to SCALE 6.1, and the improved performance of the new 252-group library available in SCALE 6.2 is especially noteworthy. A SCALE/TSUNAMI uncertainty analysis of the Hot Full Power variant for Ex. I-1a furthermore concluded that the 238U(n,γ) (capture) and 235U(View the MathML source) cross-section covariance matrices contributed the most to the total k ∞ uncertainty of 0.58%.« less

  7. Towards a practical framework for managing the risks of selecting technology to support independent living.

    PubMed

    Monk, Andrew; Hone, Kate; Lines, Lorna; Dowdall, Alan; Baxter, Gordon; Blythe, Mark; Wright, Peter

    2006-09-01

    Information and communication technology applications can help increase the independence and quality of life of older people, or people with disabilities who live in their own homes. A risk management framework is proposed to assist in selecting applications that match the needs and wishes of particular individuals. Risk comprises two components: the likelihood of the occurrence of harm and the consequences of that harm. In the home, the social and psychological harms are as important as the physical ones. The importance of the harm (e.g., injury) is conditioned by its consequences (e.g., distress, costly medical treatment). We identify six generic types of harm (including dependency, loneliness, fear and debt) and four generic consequences (including distress and loss of confidence in ability to live independently). The resultant client-centred framework offers a systematic basis for selecting and evaluating technology for independent living.

  8. Use of warm mix asphalt pavement on Interstate 95, Carmel to Hampden, northbound.

    DOT National Transportation Integrated Search

    2012-06-01

    A number of new technologies have been developed to lower the production and placement temperatures : of hot-mix asphalt (HMA). Generically, these technologies are referred to as warm-mix asphalt (WMA). : In Europe and to a lesser extent in North Ame...

  9. NGNP High Temperature Materials White Paper

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Lew Lommers; George Honma

    2012-08-01

    This white paper is one in a series of white papers that address key generic issues of the combined construction and operating license (COL) pre-application program key generic issues for the Next Generation Nuclear Plant reactor using the prismatic block fuel technology. The purpose of the pre-application program interactions with the NRC staff is to reduce the time required for COL application review by identifying and addressing key regulatory issues and, if possible, obtaining agreements for their resolution

  10. Comparison of Standard Wind Turbine Models with Vendor Models for Power System Stability Analysis: Preprint

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Honrubia-Escribano, A.; Gomez Lazaro, E.; Jimenez-Buendia, F.

    The International Electrotechnical Commission Standard 61400-27-1 was published in February 2015. This standard deals with the development of generic terms and parameters to specify the electrical characteristics of wind turbines. Generic models of very complex technological systems, such as wind turbines, are thus defined based on the four common configurations available in the market. Due to its recent publication, the comparison of the response of generic models with specific vendor models plays a key role in ensuring the widespread use of this standard. This paper compares the response of a specific Gamesa dynamic wind turbine model to the corresponding genericmore » IEC Type III wind turbine model response when the wind turbine is subjected to a three-phase voltage dip. This Type III model represents the doubly-fed induction generator wind turbine, which is not only one of the most commonly sold and installed technologies in the current market but also a complex variable-speed operation implementation. In fact, active and reactive power transients are observed due to the voltage reduction. Special attention is given to the reactive power injection provided by the wind turbine models because it is a requirement of current grid codes. Further, the boundaries of the generic models associated with transient events that cannot be represented exactly are included in the paper.« less

  11. Advanced Robotics for In-Space Vehicle Processing

    NASA Technical Reports Server (NTRS)

    Smith, Jeffrey H.; Estus, Jay; Heneghan, Cate; Bosley, John

    1990-01-01

    An analysis of spaceborne vehicle processing is described. Generic crew-EVA tasks are presented for a specific vehicle, the orbital maneuvering vehicle (OMV), with general implications to other on-orbit vehicles. The OMV is examined with respect to both servicing and maintenance. Crew-EVA activities are presented by task and mapped to a common set of generic crew-EVA primitives to identify high-demand areas for telerobot services. Similarly, a set of telerobot primitives is presented that can be used to model telerobot actions for alternative telerobot reference configurations. The telerobot primitives are tied to technologies and used for composting telerobot operations for an automated refueling scenario. Telerobotics technology issues and design accomodation guidelines (hooks and scars) for the Space Station Freedom are described.

  12. Effects of an e-Prescribing interface redesign on rates of generic drug prescribing: exploiting default options.

    PubMed

    Malhotra, Sameer; Cheriff, Adam D; Gossey, J Travis; Cole, Curtis L; Kaushal, Rainu; Ancker, Jessica S

    2016-09-01

    Increasing the use of generic medications could help control medical costs. However, educational interventions have limited impact on prescriber behavior, and e-prescribing alerts are associated with high override rates and alert fatigue. Our objective was to evaluate the effect of a less intrusive intervention, a redesign of an e-prescribing interface that provides default options intended to "nudge" prescribers towards prescribing generic drugs. This retrospective cohort study in an academic ambulatory multispecialty practice assessed the effects of customizing an e-prescribing interface to substitute generic equivalents for brand-name medications during order entry and allow a one-click override to order the brand-name medication. Among drugs with generic equivalents, the proportion of generic drugs prescribed more than doubled after the interface redesign, rising abruptly from 39.7% to 95.9% (a 56.2% increase; 95% confidence interval, 56.0-56.4%; P < .001). Before the redesign, generic drug prescribing rates varied by therapeutic class, with rates as low as 8.6% for genitourinary products and 15.7% for neuromuscular drugs. After the redesign, generic drug prescribing rates for all but four therapeutic classes were above 90%: endocrine drugs, neuromuscular drugs, nutritional products, and miscellaneous products. Changing the default option in an e-prescribing interface in an ambulatory care setting was followed by large and sustained increases in the proportion of generic drugs prescribed at the practice. Default options in health information technology exert a powerful effect on user behavior, an effect that can be leveraged to optimize decision making. © The Author 2016. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  13. Use of warm mix asphalt pavement along Rt. 27 in the towns of Farmington and New Portland.

    DOT National Transportation Integrated Search

    2012-05-01

    A number of new technologies have been developed to lower the production and placement temperatures : of hot-mix asphalt (HMA). Generically, these technologies are referred to as warm-mix asphalt (WMA). : In Europe and to a lesser extent in North Ame...

  14. 76 FR 12212 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-04

    ...-xxxx. Title: Collection of Qualitative Feedback on Agency Service Delivery. Form No.: None. Type of... for the Collection of Qualitative Feedback on Agency Service Delivery AGENCY: Federal Motor Carrier... Technology Division/MC-RRT, Office of Analysis, Research and Technology, Telephone (202) 385-2383; or e-mail...

  15. Descriptive Model of Generic WAMS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hauer, John F.; DeSteese, John G.

    The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

  16. Commercial Generic Bioprocessing Apparatus Science Insert - 03

    NASA Technical Reports Server (NTRS)

    Moreno, Nancy; Stodieck, Louis; Cushing, Paula; Stowe, Mark; Hamilton, Mary Ann; Werner, Ken

    2008-01-01

    Commercial Generic Bioprocessing Apparatus Science Insert - 03 (CSI-03) is the third set of investigations in the CSI program series. The CSI program provides the K-12 community opportunities to utilize the unique microgravity environment of the International Space Station as part of the regular classroom to encourage learning and interest in science, technology, engineering and math. CSI-03 will examine the complete life cycle of the painted lady butterfly and the ability of an orb weaving spider to spin a web, eat and remain healthy in space.

  17. Composite structural materials

    NASA Technical Reports Server (NTRS)

    Loewy, R.; Wiberley, S. E.

    1986-01-01

    Overall emphasis is on basic long-term research in the following categories: constituent materials, composite materials, generic structural elements, processing science technology; and maintaining long-term structural integrity. Research in basic composition, characteristics, and processing science of composite materials and their constituents is balanced against the mechanics, conceptual design, fabrication, and testing of generic structural elements typical of aerospace vehicles so as to encourage the discovery of unusual solutions to present and future problems. Detailed descriptions of the progress achieved in the various component parts of this comprehensive program are presented.

  18. Space platform utilities distribution study

    NASA Technical Reports Server (NTRS)

    Lefever, A. E.

    1980-01-01

    Generic concepts for the installation of power data and thermal fluid distribution lines on large space platforms were discussed. Connections with central utility subsystem modules and pallet interfaces were also considered. Three system concept study platforms were used as basepoints for the detail development. The tradeoff of high voltage low voltage power distribution and the impact of fiber optics as a data distribution mechanism were analyzed. Thermal expansion and temperature control of utility lines and ducts were considered. Technology developments required for implementation of the generic distribution concepts were identified.

  19. Information Technology in University-Level Mathematics Teaching and Learning: A Mathematician's Point of View

    ERIC Educational Resources Information Center

    Borovik, Alexandre

    2011-01-01

    Although mathematicians frequently use specialist software in direct teaching of mathematics, as a means of delivery e-learning technologies have so far been less widely used. We (mathematicians) insist that teaching methods should be subject-specific and content-driven, not delivery-driven. We oppose generic approaches to teaching, including…

  20. The Need and Keys for a New Generation Network Adjustment Software

    NASA Astrophysics Data System (ADS)

    Colomina, I.; Blázquez, M.; Navarro, J. A.; Sastre, J.

    2012-07-01

    Orientation and calibration of photogrammetric and remote sensing instruments is a fundamental capacity of current mapping systems and a fundamental research topic. Neither digital remote sensing acquisition systems nor direct orientation gear, like INS and GNSS technologies, made block adjustment obsolete. On the contrary, the continuous flow of new primary data acquisition systems has challenged the capacity of the legacy block adjustment systems - in general network adjustment systems - in many aspects: extensibility, genericity, portability, large data sets capacity, metadata support and many others. In this article, we concentrate on the extensibility and genericity challenges that current and future network systems shall face. For this purpose we propose a number of software design strategies with emphasis on rigorous abstract modeling that help in achieving simplicity, genericity and extensibility together with the protection of intellectual proper rights in a flexible manner. We illustrate our suggestions with the general design approach of GENA, the generic extensible network adjustment system of GeoNumerics.

  1. An avionics scenario and command model description for Space Generic Open Avionics Architecture (SGOAA)

    NASA Technical Reports Server (NTRS)

    Stovall, John R.; Wray, Richard B.

    1994-01-01

    This paper presents a description of a model for a space vehicle operational scenario and the commands for avionics. This model will be used in developing a dynamic architecture simulation model using the Statemate CASE tool for validation of the Space Generic Open Avionics Architecture (SGOAA). The SGOAA has been proposed as an avionics architecture standard to NASA through its Strategic Avionics Technology Working Group (SATWG) and has been accepted by the Society of Automotive Engineers (SAE) for conversion into an SAE Avionics Standard. This architecture was developed for the Flight Data Systems Division (FDSD) of the NASA Johnson Space Center (JSC) by the Lockheed Engineering and Sciences Company (LESC), Houston, Texas. This SGOAA includes a generic system architecture for the entities in spacecraft avionics, a generic processing external and internal hardware architecture, and a nine class model of interfaces. The SGOAA is both scalable and recursive and can be applied to any hierarchical level of hardware/software processing systems.

  2. PHISICS/RELAP5-3D RESULTS FOR EXERCISES II-1 AND II-2 OF THE OECD/NEA MHTGR-350 BENCHMARK

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Strydom, Gerhard

    2016-03-01

    The Idaho National Laboratory (INL) Advanced Reactor Technologies (ART) High-Temperature Gas-Cooled Reactor (HTGR) Methods group currently leads the Modular High-Temperature Gas-Cooled Reactor (MHTGR) 350 benchmark. The benchmark consists of a set of lattice-depletion, steady-state, and transient problems that can be used by HTGR simulation groups to assess the performance of their code suites. The paper summarizes the results obtained for the first two transient exercises defined for Phase II of the benchmark. The Parallel and Highly Innovative Simulation for INL Code System (PHISICS), coupled with the INL system code RELAP5-3D, was used to generate the results for the Depressurized Conductionmore » Cooldown (DCC) (exercise II-1a) and Pressurized Conduction Cooldown (PCC) (exercise II-2) transients. These exercises require the time-dependent simulation of coupled neutronics and thermal-hydraulics phenomena, and utilize the steady-state solution previously obtained for exercise I-3 of Phase I. This paper also includes a comparison of the benchmark results obtained with a traditional system code “ring” model against a more detailed “block” model that include kinetics feedback on an individual block level and thermal feedbacks on a triangular sub-mesh. The higher spatial fidelity that can be obtained by the block model is illustrated with comparisons of the maximum fuel temperatures, especially in the case of natural convection conditions that dominate the DCC and PCC events. Differences up to 125 K (or 10%) were observed between the ring and block model predictions of the DCC transient, mostly due to the block model’s capability of tracking individual block decay powers and more detailed helium flow distributions. In general, the block model only required DCC and PCC calculation times twice as long as the ring models, and it therefore seems that the additional development and calculation time required for the block model could be worth the gain that can be obtained in the spatial resolution« less

  3. An international technology platform for influenza vaccines.

    PubMed

    Hendriks, Jan; Holleman, Marit; de Boer, Otto; de Jong, Patrick; Luytjes, Willem

    2011-07-01

    Since 2008, the World Health Organization has provided seed grants to 11 manufacturers in low- and middle-income countries to establish or improve their pandemic influenza vaccine production capacity. To facilitate this ambitious project, an influenza vaccine technology platform (or "hub") was established at the Netherlands Vaccine Institute for training and technology transfer to developing countries. During its first two years of operation, a robust and transferable monovalent pilot process for egg-based inactivated whole virus influenza A vaccine production was established under international Good Manufacturing Practice standards, as well as in-process and release assays. A course curriculum was designed, including a two-volume practical handbook on production and quality control. Four generic hands-on training courses were successfully realized for over 40 employees from 15 developing country manufacturers. Planned extensions to the curriculum include cell-culture based technology for viral vaccine production, split virion influenza production, and generic adjuvant formulation. We conclude that technology transfer through the hub model works well, significantly builds vaccine manufacturing capacity in developing countries, and thereby increases global and equitable access to vaccines of high public health relevance. Copyright © 2011 Elsevier Ltd. All rights reserved.

  4. The human role in space (THURIS) applications study. Final briefing

    NASA Technical Reports Server (NTRS)

    Maybee, George W.

    1987-01-01

    The THURIS (The Human Role in Space) application is an iterative process involving successive assessments of man/machine mixes in terms of performance, cost and technology to arrive at an optimum man/machine mode for the mission application. The process begins with user inputs which define the mission in terms of an event sequence and performance time requirements. The desired initial operational capability date is also an input requirement. THURIS terms and definitions (e.g., generic activities) are applied to the input data converting it into a form which can be analyzed using the THURIS cost model outputs. The cost model produces tabular and graphical outputs for determining the relative cost-effectiveness of a given man/machine mode and generic activity. A technology database is provided to enable assessment of support equipment availability for selected man/machine modes. If technology gaps exist for an application, the database contains information supportive of further investigation into the relevant technologies. The present study concentrated on testing and enhancing the THURIS cost model and subordinate data files and developing a technology database which interfaces directly with the user via technology readiness displays. This effort has resulted in a more powerful, easy-to-use applications system for optimization of man/machine roles. Volume 1 is an executive summary.

  5. From generic pathways to ICT-supported horizontally integrated care: the SmartCare approach and convergence with future Internet assembly.

    PubMed

    Urošević, Vladimir; Mitić, Marko

    2014-01-01

    Successful service integration in policy and practice requires both technology innovation and service process innovation being pursued and implemented at the same time. The SmartCare project (partially EC-funded under CIP ICT PSP Program) aims to achieve this through development, piloting and evaluation of ICT-based services, horizontally integrating health and social care in ten pilot regions, including Kraljevo region in Serbia. The project has identified and adopted two generic highest-level common thematic pathways in joint consolidation phase - integrated support for long-term care and integrated support after hospital discharge. A common set of standard functional specifications for an open ICT platform enabling the delivery of integrated care is being defined, around the challenges of data sharing, coordination and communication in these two formalized pathways. Implementation and system integration on technology and architecture level are to be based on open standards, multivendor interoperability, and leveraging on the current evolving open specification technology foundations developed in relevant projects across the European Research Area.

  6. A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells

    PubMed Central

    Guo, Fei; Li, Ning; Fecher, Frank W.; Gasparini, Nicola; Quiroz, Cesar Omar Ramirez; Bronnbauer, Carina; Hou, Yi; Radmilović, Vuk V.; Radmilović, Velimir R.; Spiecker, Erdmann; Forberich, Karen; Brabec, Christoph J.

    2015-01-01

    The multi-junction concept is the most relevant approach to overcome the Shockley–Queisser limit for single-junction photovoltaic cells. The record efficiencies of several types of solar technologies are held by series-connected tandem configurations. However, the stringent current-matching criterion presents primarily a material challenge and permanently requires developing and processing novel semiconductors with desired bandgaps and thicknesses. Here we report a generic concept to alleviate this limitation. By integrating series- and parallel-interconnections into a triple-junction configuration, we find significantly relaxed material selection and current-matching constraints. To illustrate the versatile applicability of the proposed triple-junction concept, organic and organic-inorganic hybrid triple-junction solar cells are constructed by printing methods. High fill factors up to 68% without resistive losses are achieved for both organic and hybrid triple-junction devices. Series/parallel triple-junction cells with organic, as well as perovskite-based subcells may become a key technology to further advance the efficiency roadmap of the existing photovoltaic technologies. PMID:26177808

  7. A generic concept to overcome bandgap limitations for designing highly efficient multi-junction photovoltaic cells.

    PubMed

    Guo, Fei; Li, Ning; Fecher, Frank W; Gasparini, Nicola; Ramirez Quiroz, Cesar Omar; Bronnbauer, Carina; Hou, Yi; Radmilović, Vuk V; Radmilović, Velimir R; Spiecker, Erdmann; Forberich, Karen; Brabec, Christoph J

    2015-07-16

    The multi-junction concept is the most relevant approach to overcome the Shockley-Queisser limit for single-junction photovoltaic cells. The record efficiencies of several types of solar technologies are held by series-connected tandem configurations. However, the stringent current-matching criterion presents primarily a material challenge and permanently requires developing and processing novel semiconductors with desired bandgaps and thicknesses. Here we report a generic concept to alleviate this limitation. By integrating series- and parallel-interconnections into a triple-junction configuration, we find significantly relaxed material selection and current-matching constraints. To illustrate the versatile applicability of the proposed triple-junction concept, organic and organic-inorganic hybrid triple-junction solar cells are constructed by printing methods. High fill factors up to 68% without resistive losses are achieved for both organic and hybrid triple-junction devices. Series/parallel triple-junction cells with organic, as well as perovskite-based subcells may become a key technology to further advance the efficiency roadmap of the existing photovoltaic technologies.

  8. Human life support during interplanetary travel and domicile. IV - Mars expedition technology trade study

    NASA Technical Reports Server (NTRS)

    Rohatgi, Naresh K.; Ferrall, Joseph F.; Seshan, P. K.

    1991-01-01

    Results of trading processing technologies in a closed-loop configuration, in terms of power and weight for the Mars Expedition Mission, are presented. The technologies were traded and compared to a baseline set for functional elements that include CO2 removal, H2O electrolysis, potable H2O cleanup, and hygiene H2O cleanup. These technologies were selected from those being considered for Space Station Freedom and represent only chemical/physical technologies. Attention is given to the technology trade calculation scheme, technology data and selection, the generic modular flow schematic, and life support system specifications.

  9. A technology development program for large space antennas

    NASA Technical Reports Server (NTRS)

    Russell, R. A.; Campbell, T. G.; Freeland, R. E.

    1980-01-01

    The design and application of the offset wrap rib and the maypole (hoop/column) antenna configurations are described. The NASA mission model that generically categorizes the classes of user requirements, as well as the methods used to determine critical technologies and requirements are discussed. Performance estimates for the mesh deployable antenna selected for development are presented.

  10. Department of Defense Space Technology Guide

    DTIC Science & Technology

    2001-01-01

    Projected Applications, which summarizes a more detailed range of near -term experiments , demonstrations and developmental activities – Opportunities for...upon new, even smaller classes of spacecraft known generically as microsatellites. Near -term microsat experiments and technology demonstrations are...Additional projects with sensors hosted on both operational and experimental spacecraft to measure and characterize the upper atmosphere Experiment ACTD

  11. Test/QA plan for the validation of the verification protocol for high speed pesticide spray drift reduction technologies for row and field crops

    EPA Science Inventory

    This test/QA plan for evaluation the generic test protocol for high speed wind tunnel, representing aerial application, pesticide spray drift reduction technologies (DRT) for row and field crops is in conformance with EPA Requirements for Quality Assurance Project Plans (EPA QA/R...

  12. Test/QA plan for the validation of the verification protocol for low speed pesticide spray drift reduction technologies for row and field crops

    EPA Science Inventory

    This test/QA plan for evaluation the generic test protocol for high speed wind tunnel, representing aerial application, pesticide spray drift reduction technologies (DRT) for row and field crops is in conformance with EPA Requirements for Quality Assurance Project Plans (EPA QA/R...

  13. Language Resources for Language Technology: Proceedings of the TELRI (Trans-European Language Resources Infrastructure) European Seminar (1st, Tihany, Hungary, September 15-16, 1995).

    ERIC Educational Resources Information Center

    Rettig, Heike, Ed.

    This proceedings contains papers from the first European seminar of the Trans-European Language Resources Infrastructure (TELRI) include: "Cooperation with Central and Eastern Europe in Language Engineering" (Poul Andersen); "Language Technology and Language Resources in China" (Feng Zhiwei); "Public Domain Generic Tools:…

  14. Energy use in the marine transportation industry. Task II. Efficiency improvements. Draft report

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1977-06-02

    Research and development areas that hold promise for maritime energy conservation are identified and evaluated. The methodology used in the evaluation of potential research areas and results, conclusions, and recommendations are presented. Fifteen programs are identified in four generic technologies and these are discussed in detail in appendices A-D. The areas are: main propulsion plants, propulsors, hydrodynamics, and vessel operations. Fuels are discussed briefly in appendix E. Additional information is presented on the generic US flag baseline operational and cost parameters; a sample output model is presented. (MCW)

  15. Challenges for Australia's Bio/Nanopharma Policies: trade deals, public goods and reference pricing in sustainable industrial renewal

    PubMed Central

    Faunce, Thomas A

    2007-01-01

    Industrial renewal in the bio/nanopharma sector is important for the long term strength of the Australian economy and for the health of its citizens. A variety of factors, however, may have caused inadequate attention to focus on systematically promoting domestic generic and small biotechnology manufacturers in Australian health policy. Despite recent clarifications of 'springboarding' capacity in intellectual property legislation, federal government requirements for specific generic price reductions on market entry and the potential erosion of reference pricing through new F1 and F2 categories for the purposes of Pharmaceutical Benefits Scheme (PBS) assessments, do not appear to be coherently designed to sustainably position this industry sector in 'biologics,' nanotherapeutics and pharmacogenetics. There also appears to have been little attention paid in this context to policies fostering industry sustainability and public affordability (as encouraged by the National Medicines Policy). One notable example includes that failure to consider facilitating mutual exchanges on regulatory assessment of health technology safety and cost-effectiveness (including reference pricing) in the context of ongoing free trade negotiations between Australia and China (the latter soon to possess the world's largest generic pharmaceutical manufacturing capacity). The importance of a thriving Australian domestic generic pharmaceutical and bio/nano tech industry in terms of biosecurity, similarly appears to have been given insufficient policy attention. Reasons for such policy oversights may relate to increasing interrelationships between generic and 'brand-name' manufacturers and the scale of investment required for the Australian generics and bio/nano technology sector to be a significant driver of local production. It might also result from singularly effective lobbying pressure exerted by Medicines Australia, the 'brand-name' pharmaceutical industry association, utilising controversial interpretations of reward of pharmaceutical 'innovation' provisions in the Australia-US Free Trade Agreement (AUSFTA) through the policy-development mechanisms of the AUSFTA Medicines Working Group and most recently an Innovative Medicines Working Group with the Department of Health and Ageing. This paper critically analyses such arguments in the context of emerging challenges for sustainable industrial renewal in Australia's bio/nanopharma sector. PMID:17543114

  16. Capital cost estimate

    NASA Technical Reports Server (NTRS)

    1975-01-01

    The capital cost estimate for the nuclear process heat source (NPHS) plant was made by: (1) using costs from the current commercial HTGR for electricity production as a base for items that are essentially the same and (2) development of new estimates for modified or new equipment that is specifically for the process heat application. Results are given in tabular form and cover the total investment required for each process temperature studied.

  17. Nuclear Engineering Computer Modules, Thermal-Hydraulics, TH-3: High Temperature Gas Cooled Reactor Thermal-Hydraulics.

    ERIC Educational Resources Information Center

    Reihman, Thomas C.

    This learning module is concerned with the temperature field, the heat transfer rates, and the coolant pressure drop in typical high temperature gas-cooled reactor (HTGR) fuel assemblies. As in all of the modules of this series, emphasis is placed on developing the theory and demonstrating its use with a simplified model. The heart of the module…

  18. Phytosanitary Irradiation

    PubMed Central

    Hallman, Guy J.; Blackburn, Carl M.

    2016-01-01

    Phytosanitary treatments disinfest traded commodities of potential quarantine pests. Phytosanitary irradiation (PI) treatments use ionizing radiation to accomplish this, and, since their international commercial debut in 2004, the use of this technology has increased by ~10% annually. Generic PI treatments (one dose is used for a group of pests and/or commodities, although not all have been tested for efficacy) are used in virtually all commercial PI treatments, and new generic PI doses are proposed, such as 300 Gy, for all insects except pupae and adult Lepidoptera (moths). Fresh fruits and vegetables tolerate PI better than any other broadly used treatment. Advances that would help facilitate the use of PI include streamlining the approval process, making the technology more accessible to potential users, lowering doses and broadening their coverage, and solving potential issues related to factors that might affect efficacy. PMID:28231103

  19. Generic worklist handler for workflow-enabled products

    NASA Astrophysics Data System (ADS)

    Schmidt, Joachim; Meetz, Kirsten; Wendler, Thomas

    1999-07-01

    Workflow management (WfM) is an emerging field of medical information technology. It appears as a promising key technology to model, optimize and automate processes, for the sake of improved efficiency, reduced costs and improved patient care. The Application of WfM concepts requires the standardization of architectures and interfaces. A component of central interest proposed in this report is a generic work list handler: A standardized interface between a workflow enactment service and application system. Application systems with embedded work list handlers will be called 'Workflow Enabled Application Systems'. In this paper we discus functional requirements of work list handlers, as well as their integration into workflow architectures and interfaces. To lay the foundation for this specification, basic workflow terminology, the fundamentals of workflow management and - later in the paper - the available standards as defined by the Workflow Management Coalition are briefly reviewed.

  20. Information technology security system engineering methodology

    NASA Technical Reports Server (NTRS)

    Childs, D.

    2003-01-01

    A methodology is described for system engineering security into large information technology systems under development. The methodology is an integration of a risk management process and a generic system development life cycle process. The methodology is to be used by Security System Engineers to effectively engineer and integrate information technology security into a target system as it progresses through the development life cycle. The methodology can also be used to re-engineer security into a legacy system.

  1. Generic Data Pipelining Using ORAC-DR

    NASA Astrophysics Data System (ADS)

    Allan, Alasdair; Jenness, Tim; Economou, Frossie; Currie, Malcolm J.; Bly, Martin J.

    A generic data reduction pipeline is, perhaps, the holy grail for data reduction software. We present work which sets us firmly on the path towards this goal. ORAC-DR is an online data reduction pipeline written by the Joint Astronomy Center (JAC) and the UK Astronomy Technology Center (ATC) and distributed as part of the Starlink Software collection (SSC). It is intended to run with a minimum of observer interaction, and is able to handle data from many different instruments, including SCUBA, CGS4, UFTI, IRCAM and Michelle, with support for IRIS2 and UIST under development. Recent work by Starlink in collaboration with the JAC has resulted in an increase in the pipeline's flexibility, opening up the possibility that it could be used for truly generic data reduction for data from any imaging, and eventually spectroscopic, detector.

  2. How should we build a generic open-source water management simulator?

    NASA Astrophysics Data System (ADS)

    Khadem, M.; Meier, P.; Rheinheimer, D. E.; Padula, S.; Matrosov, E.; Selby, P. D.; Knox, S.; Harou, J. J.

    2014-12-01

    Increasing water needs for agriculture, industry and cities mean effective and flexible water resource system management tools will remain in high demand. Currently many regions or countries use simulators that have been adapted over time to their unique system properties and water management rules and realities. Most regions operate with a preferred short-list of water management and planning decision support systems. Is there scope for a simulator, shared within the water management community, that could be adapted to different contexts, integrate community contributions, and connect to generic data and model management software? What role could open-source play in such a project? How could a genericuser-interface and data/model management software sustainably be attached to this model or suite of models? Finally, how could such a system effectively leverage existing model formulations, modeling technologies and software? These questions are addressed by the initial work presented here. We introduce a generic water resource simulation formulation that enables and integrates both rule-based and optimization driven technologies. We suggest how it could be linked to other sub-models allowing for detailed agent-based simulation of water management behaviours. An early formulation is applied as an example to the Thames water resource system in the UK. The model uses centralised optimisation to calculate allocations but allows for rule-based operations as well in an effort to represent observed behaviours and rules with fidelity. The model is linked through import/export commands to a generic network model platform named Hydra. Benefits and limitations of the approach are discussed and planned work and potential use cases are outlined.

  3. Multiple criteria decision analysis for health technology assessment.

    PubMed

    Thokala, Praveen; Duenas, Alejandra

    2012-12-01

    Multicriteria decision analysis (MCDA) has been suggested by some researchers as a method to capture the benefits beyond quality adjusted life-years in a transparent and consistent manner. The objectives of this article were to analyze the possible application of MCDA approaches in health technology assessment and to describe their relative advantages and disadvantages. This article begins with an introduction to the most common types of MCDA models and a critical review of state-of-the-art methods for incorporating multiple criteria in health technology assessment. An overview of MCDA is provided and is compared against the current UK National Institute for Health and Clinical Excellence health technology appraisal process. A generic MCDA modeling approach is described, and the different MCDA modeling approaches are applied to a hypothetical case study. A comparison of the different MCDA approaches is provided, and the generic issues that need consideration before the application of MCDA in health technology assessment are examined. There are general practical issues that might arise from using an MCDA approach, and it is suggested that appropriate care be taken to ensure the success of MCDA techniques in the appraisal process. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  4. Monolithic photonic integration technology platform and devices at wavelengths beyond 2μm for gas spectroscopy applications

    NASA Astrophysics Data System (ADS)

    Latkowski, S.; van Veldhoven, P. J.; Hänsel, A.; D'Agostino, D.; Rabbani-Haghighi, H.; Docter, B.; Bhattacharya, N.; Thijs, P. J. A.; Ambrosius, H. P. M. M.; Smit, M. K.; Williams, K. A.; Bente, E. A. J. M.

    2017-02-01

    In this paper a generic monolithic photonic integration technology platform and tunable laser devices for gas sensing applications at 2 μm will be presented. The basic set of long wavelength optical functions which is fundamental for a generic photonic integration approach is realized using planar, but-joint, active-passive integration on indium phosphide substrate with active components based on strained InGaAs quantum wells. Using this limited set of basic building blocks a novel geometry, widely tunable laser source was designed and fabricated within the first long wavelength multiproject wafer run. The fabricated laser operates around 2027 nm, covers a record tuning range of 31 nm and is successfully employed in absorption measurements of carbon dioxide. These results demonstrate a fully functional long wavelength photonic integrated circuit that operates at these wavelengths. Moreover, the process steps and material system used for the long wavelength technology are almost identical to the ones which are used in the technology process at 1.5μm which makes it straightforward and hassle-free to transfer to the photonic foundries with existing fabrication lines. The changes from the 1550 nm technology and the trade-offs made in the building block design and layer stack will be discussed.

  5. PIE on Safety-Tested AGR-1 Compact 5-1-1

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hunn, John D.; Morris, Robert Noel; Baldwin, Charles A.

    Post-irradiation examination (PIE) is being performed in support of tristructural isotropic (TRISO) coated particle fuel development and qualification for High-Temperature Gas-cooled Reactors (HTGRs). AGR-1 was the first in a series of TRISO fuel irradiation experiments initiated in 2006 under the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program; this work continues to be funded by the Department of Energy's Office of Nuclear Energy as part of the Advanced Reactor Technologies (ART) initiative. AGR-1 fuel compacts were fabricated at Oak Ridge National Laboratory (ORNL) in 2006 and irradiated for three years in the Idaho National Laboratory (INL) Advanced Test Reactormore » (ATR) to demonstrate and evaluate fuel performance under HTGR irradiation conditions. PIE is being performed at INL and ORNL to study how the fuel behaved during irradiation, and to examine fuel performance during exposure to elevated temperatures at or above temperatures that could occur during a depressurized conduction cooldown event. This report summarizes safety testing of irradiated AGR-1 Compact 5-1-1 in the ORNL Core Conduction Cooldown Test Facility (CCCTF) and post-safety testing PIE.« less

  6. Taking the Sociological Imagination to School: An Analysis of the (Lack of) Impact of Information and Communication Technologies on Education Systems

    ERIC Educational Resources Information Center

    Somekh, Bridget

    2004-01-01

    This article suggests that it is time for sociologists to redirect their focus from critiques of policy makers' unrealistic visions for information and communication technologies (ICTs) to the more generic issues that consistently mobilise resistance to ICTs within schools and education systems. There is an extraordinary difference between young…

  7. Setting up a Low-Cost Lab Management System for a Multi-Purpose Computing Laboratory Using Virtualisation Technology

    ERIC Educational Resources Information Center

    Mok, Heng Ngee; Lee, Yeow Leong; Tan, Wee Kiat

    2012-01-01

    This paper describes how a generic computer laboratory equipped with 52 workstations is set up for teaching IT-related courses and other general purpose usage. The authors have successfully constructed a lab management system based on decentralised, client-side software virtualisation technology using Linux and free software tools from VMware that…

  8. Bringing Control System User Interfaces to the Web

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Xihui; Kasemir, Kay

    With the evolution of web based technologies, especially HTML5 [1], it becomes possible to create web-based control system user interfaces (UI) that are cross-browser and cross-device compatible. This article describes two technologies that facilitate this goal. The first one is the WebOPI [2], which can seamlessly display CSS BOY [3] Operator Interfaces (OPI) in web browsers without modification to the original OPI file. The WebOPI leverages the powerful graphical editing capabilities of BOY and provides the convenience of re-using existing OPI files. On the other hand, it uses generic JavaScript and a generic communication mechanism between the web browser andmore » web server. It is not optimized for a control system, which results in unnecessary network traffic and resource usage. Our second technology is the WebSocket-based Process Data Access (WebPDA) [4]. It is a protocol that provides efficient control system data communication using WebSocket [5], so that users can create web-based control system UIs using standard web page technologies such as HTML, CSS and JavaScript. WebPDA is control system independent, potentially supporting any type of control system.« less

  9. Implementing the space shuttle data processing system with the space generic open avionics architecture

    NASA Technical Reports Server (NTRS)

    Wray, Richard B.; Stovall, John R.

    1993-01-01

    This paper presents an overview of the application of the Space Generic Open Avionics Architecture (SGOAA) to the Space Shuttle Data Processing System (DPS) architecture design. This application has been performed to validate the SGOAA, and its potential use in flight critical systems. The paper summarizes key elements of the Space Shuttle avionics architecture, data processing system requirements and software architecture as currently implemented. It then summarizes the SGOAA architecture and describes a tailoring of the SGOAA to the Space Shuttle. The SGOAA consists of a generic system architecture for the entities in spacecraft avionics, a generic processing external and internal hardware architecture, a six class model of interfaces and functional subsystem architectures for data services and operations control capabilities. It has been proposed as an avionics architecture standard with the National Aeronautics and Space Administration (NASA), through its Strategic Avionics Technology Working Group, and is being considered by the Society of Aeronautic Engineers (SAE) as an SAE Avionics Standard. This architecture was developed for the Flight Data Systems Division of JSC by the Lockheed Engineering and Sciences Company, Houston, Texas.

  10. New Weapons and the Arms Race

    NASA Astrophysics Data System (ADS)

    Tsipis, Kosta

    1983-10-01

    In speaking about technologies that could further animate the weapons competition between the United States and the U.S.S.R., it would be useful to distinguish between technologies that have already been incorporated into specific weapons systems, and new technologies that are of a generic nature, can be used in a variety of applications, adn can best be described by the tasks that they can perform rather than any specific weapons application. Let me begin with the latter class.

  11. The Shock and Vibration Digest, Volume 14, Number 4

    DTIC Science & Technology

    1982-04-01

    temperature, humidity, shock, and vibration -- can influence this capability; as a result an almost continuous program of research and development has...pro- ducing reliability tests. For some time there has been interest in the Army Test Methodology program for developing a vibration system capable...geology of the Livermore Valley is obtained. 82-768 Transient Stress Wave Propagation in HTGR Fuel Element Impacts I.T. Almajan and P.D. Smith

  12. Coupling a Supercritical Carbon Dioxide Brayton Cycle to a Helium-Cooled Reactor.

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Middleton, Bobby; Pasch, James Jay; Kruizenga, Alan Michael

    2016-01-01

    This report outlines the thermodynamics of a supercritical carbon dioxide (sCO 2) recompression closed Brayton cycle (RCBC) coupled to a Helium-cooled nuclear reactor. The baseline reactor design for the study is the AREVA High Temperature Gas-Cooled Reactor (HTGR). Using the AREVA HTGR nominal operating parameters, an initial thermodynamic study was performed using Sandia's deterministic RCBC analysis program. Utilizing the output of the RCBC thermodynamic analysis, preliminary values of reactor power and of Helium flow rate through the reactor were calculated in Sandia's HelCO 2 code. Some research regarding materials requirements was then conducted to determine aspects of corrosion related tomore » both Helium and to sCO 2 , as well as some mechanical considerations for pressures and temperatures that will be seen by the piping and other components. This analysis resulted in a list of materials-related research items that need to be conducted in the future. A short assessment of dry heat rejection advantages of sCO 2> Brayton cycles was also included. This assessment lists some items that should be investigated in the future to better understand how sCO 2 Brayton cycles and nuclear can maximally contribute to optimizing the water efficiency of carbon free power generation« less

  13. Reimbursement of biosimilars in Poland: is there a link to health technology assessment?

    PubMed

    Neumann, Dominika; Jabłecka, Anna

    2016-12-01

    Due to their complex structures, biosimilars are not generics. The differences between them are considered during market authorization processes but remain unclear during reimbursement decision-making. We analyzed the reimbursement of biopharmaceuticals in Poland with an emphasis on biosimilars and compared the health technology assessment (HTA) process with that defined in other countries. Recommendations provided by the Polish HTA organization and those in other countries were included as source documents. The period of interest covered January 2012 to December 2014. The reimbursement process for biosimilars in Poland is the same as that for generics. In contrast to other countries, a HTA is not involved in decision-making in Poland. The short administrative procedure for reimbursement of biosimilars in Poland accelerates the decision-making process; therefore, therapies can be made available to patients more quickly. However, this procedure can potentially lead to underestimation of aspects concerning the effectiveness and safety of biosimilars.

  14. New generic indexing technology

    NASA Technical Reports Server (NTRS)

    Freeston, Michael

    1996-01-01

    There has been no fundamental change in the dynamic indexing methods supporting database systems since the invention of the B-tree twenty-five years ago. And yet the whole classical approach to dynamic database indexing has long since become inappropriate and increasingly inadequate. We are moving rapidly from the conventional one-dimensional world of fixed-structure text and numbers to a multi-dimensional world of variable structures, objects and images, in space and time. But, even before leaving the confines of conventional database indexing, the situation is highly unsatisfactory. In fact, our research has led us to question the basic assumptions of conventional database indexing. We have spent the past ten years studying the properties of multi-dimensional indexing methods, and in this paper we draw the strands of a number of developments together - some quite old, some very new, to show how we now have the basis for a new generic indexing technology for the next generation of database systems.

  15. How language shapes the cultural inheritance of categories

    PubMed Central

    Gelman, Susan A.; Roberts, Steven O.

    2017-01-01

    It is widely recognized that language plays a key role in the transmission of human culture, but relatively little is known about the mechanisms by which language simultaneously encourages both cultural stability and cultural innovation. This paper examines this issue by focusing on the use of language to transmit categories, focusing on two universal devices: labels (e.g., shark, woman) and generics (e.g., “sharks attack swimmers”; “women are nurturing”). We propose that labels and generics each assume two key principles: norms and essentialism. The normative assumption permits transmission of category information with great fidelity, whereas essentialism invites innovation by means of an open-ended, placeholder structure. Additionally, we sketch out how labels and generics aid in conceptual alignment and the progressive “looping” between categories and cultural practices. In this way, human language is a technology that enhances and expands the categorization capacities that we share with other animals. PMID:28739931

  16. Pointing and control system enabling technology for future automated space missions

    NASA Technical Reports Server (NTRS)

    Dahlgren, J. B.

    1978-01-01

    Future automated space missions present challenging opportunities in the pointing-and-control technology disciplines. The enabling pointing-and-control system technologies for missions from 1985 to the year 2000 were identified and assessed. A generic mission set including Earth orbiter, planetary, and other missions which predominantly drive the pointing-and-control requirements was selected for detailed evaluation. Technology candidates identified were prioritized as planning options for future NASA-OAST advanced development programs. The primary technology thrusts in each candidate program were cited, and advanced development programs in pointing-and-control were recommended for the FY 80 to FY 87 period, based on these technology thrusts.

  17. Advanced control techniques for teleoperation in earth orbit

    NASA Technical Reports Server (NTRS)

    Bejczy, A. K.; Brooks, T. L.

    1980-01-01

    Emerging teleoperation tasks in space invite advancements in teleoperator control technology. This paper briefly summarizes the generic issues related to earth orbital applications of teleoperators, and describes teleoperator control technology development work including visual and non-visual sensors and displays, kinesthetic feedback and computer-aided controls. Performance experiments were carried out using sensor and computer aided controls with promising results which are briefly summarized.

  18. Formatively Assessing Teamwork in Technology-Enabled Twenty-First Century Classrooms: Exploratory Findings of a Teamwork Awareness Programme in Singapore

    ERIC Educational Resources Information Center

    Koh, Elizabeth; Hong, Helen; Tan, Jennifer Pei-Ling

    2018-01-01

    Teamwork, one of the core competencies for the twenty-first century learner, is a critical skill for work and learning. However, assessing teamwork is complex, in particular, developing a measure of teamwork that is domain-generic and applicable across a wide range of learners. This paper documents one such study that leverages technology to help…

  19. Design, System, Value: The Role of Problem-Solving and Critical Thinking Capabilities in Technology Education, as Perceived by Teachers

    ERIC Educational Resources Information Center

    Schooner, Patrick; Nordlöf, Charlotta; Klasander, Claes; Hallström, Jonas

    2017-01-01

    The Organisation for Economic Co-operation and Development (OECD, 2013) defines its views on necessary skills for 21st century citizenship and life-long learning, advocating a generic skillset of literacy, numeracy, and problem-solving in technology-rich environments. Other sources also include critical thinking as a vital 21st Century skill.…

  20. Thermal Control Technologies for Complex Spacecraft

    NASA Technical Reports Server (NTRS)

    Swanson, Theodore D.

    2004-01-01

    Thermal control is a generic need for all spacecraft. In response to ever more demanding science and exploration requirements, spacecraft are becoming ever more complex, and hence their thermal control systems must evolve. This paper briefly discusses the process of technology development, the state-of-the-art in thermal control, recent experiences with on-orbit two-phase systems, and the emerging thermal control technologies to meet these evolving needs. Some "lessons learned" based on experience with on-orbit systems are also presented.

  1. Put a Coalatom in Your Tank: The Compelling Case for a Marriage of Coal and Nuclear Energy

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Penfield, Scott R. Jr.; Bolthrunis, Charles O.

    2006-07-01

    Increasing costs and security concerns with present fossil energy sources, plus environmental concerns related to CO{sub 2} emissions and the emergence of new technologies in the energy and transportation sectors set the stage for a marriage of convenience between coal and nuclear energy. As the price of oil continues to increase and supply becomes increasingly constrained, coal offers a secure domestic alternative to foreign oil as a source of liquid fuels. However, conventional technologies for converting coal to liquid fuels produce large quantities of CO{sub 2} that must be released or sequestered. Advanced nuclear technologies, particularly the High-Temperature Gas-Cooled Reactormore » (HTGR), have the potential to produce hydrogen via water splitting; however, the transportation and storage of hydrogen are significant barriers to the 'Holy Grail', the Hydrogen Economy. In a coal/nuclear marriage, the hydrogen and oxygen provided by nuclear energy are joined with coal as a source of carbon to provide liquid fuels with negligible CO{sub 2} release from the process. In combination with emerging hybrid vehicles, fuels based on a coal/nuclear marriage promise stable prices, increased domestic security and a reduction in CO{sub 2} emissions without the need to completely replace our transportation fuels infrastructure. The intent of this paper is to outline the technical basis for the above points and to show that process energy applications of nuclear energy can provide the basis for answering some of the tougher questions related to energy and the environment. (authors)« less

  2. Scientific Data Management (SDM) Center for Enabling Technologies. Final Report, 2007-2012

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ludascher, Bertram; Altintas, Ilkay

    Our contributions to advancing the State of the Art in scientific workflows have focused on the following areas: Workflow development; Generic workflow components and templates; Provenance collection and analysis; and, Workflow reliability and fault tolerance.

  3. HTGR fuels and core development program. Quarterly progress report for the period ending August 31, 1975

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    None

    1975-09-30

    Studies of reactions between core materials and coolant impurities, basic fission product transport mechanisms, core graphite development and testing, the development and testing of recyclable fuel systems, and physics and fuel management studies are described. Materials studies include irradiation capsule tests of both fuel and graphite. Experimental procedures and results are discussed and, where appropriate, the data are presented in tables, graphs, and photographs. (auth)

  4. Cardiology needs good planning for the future.

    PubMed

    Goodroe, J H; Hicks, K J

    1990-08-01

    In today's health care environment, hospitals have to develop strategies to maintain their market share, especially in cardiac services. The authors share generic strategies in cost leadership, product differentiation and technological leadership that can be adapted and implemented in cardiac centers.

  5. Railroad classification yard technology : assessment of car speed control systems

    DOT National Transportation Integrated Search

    1980-12-01

    The scope of this study has encompassed an evaluation of fourteen yard speed : control devices, an identification of four generic speed control systems, a : qualitative assessment of the four systems, and finally a quantitative analysis : of three hy...

  6. A Generic Evaluation Model for Semantic Web Services

    NASA Astrophysics Data System (ADS)

    Shafiq, Omair

    Semantic Web Services research has gained momentum over the last few Years and by now several realizations exist. They are being used in a number of industrial use-cases. Soon software developers will be expected to use this infrastructure to build their B2B applications requiring dynamic integration. However, there is still a lack of guidelines for the evaluation of tools developed to realize Semantic Web Services and applications built on top of them. In normal software engineering practice such guidelines can already be found for traditional component-based systems. Also some efforts are being made to build performance models for servicebased systems. Drawing on these related efforts in component-oriented and servicebased systems, we identified the need for a generic evaluation model for Semantic Web Services applicable to any realization. The generic evaluation model will help users and customers to orient their systems and solutions towards using Semantic Web Services. In this chapter, we have presented the requirements for the generic evaluation model for Semantic Web Services and further discussed the initial steps that we took to sketch such a model. Finally, we discuss related activities for evaluating semantic technologies.

  7. Generic Pharmaceutical Association (GPhA) - 2015 CMC Workshop (June 9-10, 2015 - Bethesda, Maryland, USA).

    PubMed

    Komlos, D

    2015-07-01

    Nearly 400 professionals attended the 2-day Generic Pharmaceutical Association (GPhA) workshop dedicated to fostering discussions on the FDA's chemistry, manufacturing and controls (CMC) expectations for abbreviated new drug applications (ANDAs), enhanced regulatory filing requirements, and other topics, as CMC takes root in the Office of Pharmaceutical Quality (OPQ). Following the keynote address by Janet Woodcock, Director of the FDA's Center for Drug Evaluation and Research (CDER) and Acting Director of OPQ, and an update from the Office of Generic Drugs (OGD) by Ted Sherwood, Acting Director of the OGD's Office of Regulatory Operations, plenary sessions took place covering OPQ updates, management plans, Generic Drug User Fee Amendments of 2012 (GDUFA) backlog, year 1 and 2 cohorts, drug substance, defining starting materials, quality related refuse-to-receive standards, risk and team-based integrated quality assessment, deficiencies and information requests - CMC submissions, emerging technologies, compliance and inspection, lifecycle management of drug products, quality metrics, pharmaceutically relevant dissolution specifications, and communication and project management. This report will provide a summary of conference highlights. Copyright 2015 Prous Science, S.A.U. or its licensors. All rights reserved.

  8. EOforge: Generic Open Framework for Earth Observation Data Processing Systems

    DTIC Science & Technology

    2006-09-01

    Allow the use of existing interfaces, i.e. MUIS: ESA multimission catalogue for EO products. • Support last EO systems technologies, i.e. MASS ...5. Extensibility and configurability to allow customisation and the inclusion of new functionality. 6. Multi-instrument and multi-mission processing...such as: • MUIS: ESA multimission catalogue for EO products. • MASS (Multi-Application Support Service System): ESA web services technology standard

  9. USAF solar thermal applications overview

    NASA Technical Reports Server (NTRS)

    Hauger, J. S.; Simpson, J. A.

    1981-01-01

    Process heat applications were compared to solar thermal technologies. The generic process heat applications were analyzed for solar thermal technology utilization, using SERI's PROSYS/ECONOMAT model in an end use matching analysis and a separate analysis was made for solar ponds. Solar technologies appear attractive in a large number of applications. Low temperature applications at sites with high insolation and high fuel costs were found to be most attractive. No one solar thermal technology emerges as a clearly universal or preferred technology, however,, solar ponds offer a potential high payoff in a few, selected applications. It was shown that troughs and flat plate systems are cost effective in a large number of applications.

  10. Vehicle health management technology needs

    NASA Technical Reports Server (NTRS)

    Hammond, Walter E.; Jones, W. G.

    1992-01-01

    Background material on vehicle health management (VHM) and health monitoring/control is presented. VHM benefits are described and a list of VHM technology needs that should be pursued is presented. The NASA funding process as it impacts VHM technology funding is touched upon, and the VHM architecture guidelines for generic launch vehicles are described. An example of a good VHM architecture, design, and operational philosophy as it was conceptualized for the National Launch System program is presented. Consideration is given to the Strategic Avionics Technology Working Group's role in VHM, earth-to-orbit, and space vehicle avionics technology development considerations, and some actual examples of VHM benefits for checkout are given.

  11. National Space Transportation and Support Study/technology requirements and plans

    NASA Technical Reports Server (NTRS)

    Walberg, G. D.; Gasperich, F. J., Jr.; Scheyhing, E. R.

    1986-01-01

    This paper presents a generic technology plan which has been developed as part of the National Space Transportation and Support Study. This program, which addresses a wide variety of potentially high payoff technology areas, is structured to promote both enhanced vehicle performance and greatly improved operational efficiency and includes both evolutionary and breakthrough technologies. The plan is presented in terms of disciplinary plan elements, which were developed by joint NASA/USAF disciplinary working groups, and as a set of demonstration projects which serve as focal points for the overall plan and drive the development of the many interrelated disciplinary activities.

  12. ISS Flight 2A.2B (STS-106): Commercial Generic Bioprocessing Apparatus (CGBA) Payload BioServe Space Technologies

    NASA Technical Reports Server (NTRS)

    Stodieck, Louis; Klaus, David

    2001-01-01

    The two experiments housed in the Commercial Generic Bioprocessing Apparatus (CGBA) during STS-106 were designed to explore how biological processes are affected by microgravity. The first was a developmental study into the effects of microgravity on motor-neuronal growth in the fruit fly species Drosophila melanogaster and the second study was designed to characterize changes in kidney cell gene expression. The objective of the primary experiment, called NIH-B1, was to determine how gravity affects neuronal development of the D. melanogaster embryo and larvae in microgravity, specifically observing the neural connections to muscle fibers.

  13. A PEMFC hybrid electric vehicle real time control system

    NASA Astrophysics Data System (ADS)

    Sun, Hongqiao

    In recent years, environmental friendly technologies and alternative energy solutions have drawn a lot of public attentions due to global energy crisis and pollution issues. Fuel cell (FC), a technology invented almost at the same time as the internal combustion (IC) engine, is now the focus of the automotive industry again. The fuel cell vehicle (FCV) has zero emission and its efficiency is significantly higher than the conventional IC engine power vehicles. Among a variety of FCV technologies, proton exchange membrane (PEM) FC vehicle appears to be far more attractive and mature. The prototype PEMFC vehicle has been developed and demonstrated to the public by nearly all the major automotive manufacturers in recent years. However, to the interest of the public research, publications and documentations on the PEMFC vehicle technology are rarely available due to its proprietary nature, which essentially makes it a secured technology. This dissertation demonstrates a real world application of a PEMFC hybrid electric vehicle. Through presenting the vehicle design concept, developing the real time control system and generating generic operation principles, this dissertation targets at establishing the public knowledge base on this new technology. A complete PEMFC hybrid electric vehicle design, including vehicle components layout, process flow diagram, real time control system architecture, subsystem structures and control algorithms, is presented in order to help understand the whole vehicle system. The design concept is validated through the vehicle demonstration. Generic operating principles are established along with the validation process, which helps populate this emerging technology. Thereafter, further improvements and future research directions are discussed.

  14. DEFINITIVE SOX CONTROL PROCESS EVALUATIONS: LIMESTONE, DOUBLE ALKALI, AND CITRATE FGD PROCESSES

    EPA Science Inventory

    The report gives results of a detailed comparative technical and economic evaluation of limestone slurry, generic double alkali, and citrate flue gas desulfurization (FGD) processes, assuming proven technology and using representative power plant, process design, and economic pre...

  15. A Generic Structural Integrity Assurance Technology Program for the Army

    DTIC Science & Technology

    1989-11-01

    and Pressure Vessel Code , American Society of Mechanical Engineers, 1986. DEFINITIONS AND ACRONYMS Definitions A-Basis: At least 99 percent of the...Aluminum Bridge and Other Highway Structures, 1976. Aluminum Association Specifications for Aluminum Structures, Third Edition, 1976. ASME ASME Boiler

  16. Validation of the mix design process for cold in-place rehabilitation using foamed asphalt.

    DOT National Transportation Integrated Search

    2007-06-01

    Asphalt pavement recycling has grown dramatically over the last few years as a viable : technology to rehabilitate existing asphalt pavements. Iowa's current Cold In-place : Recycling (CIR) practice utilizes a generic recipe specification to define t...

  17. Forecast and virtual weather driven plant disease risk modeling system

    USDA-ARS?s Scientific Manuscript database

    We describe a system in use and development that leverages public weather station data, several spatialized weather forecast types, leaf wetness estimation, generic plant disease models, and online statistical evaluation. Convergent technological developments in all these areas allow, with funding f...

  18. Detection and Monitoring of Airborne Nuclear Waste Materials. Annual Report to Department of Energy.

    DTIC Science & Technology

    1979-12-04

    an active core , its detection by counting techniques is often slow and impractical. For these reasons NRL under contract with DoE undertook develop ...Protection and Measurements, Tritium Measurement Techniques NCRP Report No. 47 (1976). 2. " Development of a Continuous Tritium Monitor for Fuel Reprocessing...Trans. Am. Nucl. Soc. 21, 91 (1975). 146. "Process Behavior of and Environmental Assessments of C Releases from an HTGR Fuel Reprocessing Facility" J. W

  19. Thermal-Hydraulic Transient Analysis of a Packed Particle Bed Reactor Fuel Element

    DTIC Science & Technology

    1990-06-01

    long fuel elements, arranged to form a core , were analyzed for an up-power transient from 0 MWt to approximately 18 MWt. The simple model significantly...VARIATIONS IN FUEL ELEMENT GEOMETRY ............. 60 4.4 VARIATIONS IN THE MANNER OF TRANSIENT CONTROL ..... 62 4.5 CORE REPRESENTATION BY MULTIPLE FUEL ...the HTGR , however, the PBR packs small fuel particles between inner and outer retention elements, designated as frits. The PBR is appropriate for a

  20. The Shock and Vibration Digest. Volume 13, Number 4

    DTIC Science & Technology

    1981-04-01

    Brazil to find and develop their offshore oil resources. Much detailed planning and organization have gone into this program . Given as background in...summer program is a specially developed course of study which is based on two regular MIT subjects (one graduate level and one undergraduate level...Seal on an HTGR Core Subjected to Seianic Support Motions A. Chuang General Atomic Co., San Diego, CA, ASME Paper No. 80-C2/PVP-21 Key Words

  1. Kinetics of Chronic Oxidation of NBG-17 Nuclear Graphite by Water Vapor

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Contescu, Cristian I; Burchell, Timothy D; Mee, Robert

    2015-05-01

    This report presents the results of kinetic measurements during accelerated oxidation tests of NBG-17 nuclear graphite by low concentration of water vapor and hydrogen in ultra-high purity helium. The objective is to determine the parameters in the Langmuir-Hinshelwood (L-H) equation describing the oxidation kinetics of nuclear graphite in the helium coolant of high temperature gas-cooled reactors (HTGR). Although the helium coolant chemistry is strictly controlled during normal operating conditions, trace amounts of moisture (predictably < 0.2 ppm) cannot be avoided. Prolonged exposure of graphite components to water vapor at high temperature will cause very slow (chronic) oxidation over the lifetimemore » of graphite components. This behavior must be understood and predicted for the design and safe operation of gas-cooled nuclear reactors. The results reported here show that, in general, oxidation by water of graphite NBG-17 obeys the L-H mechanism, previously documented for other graphite grades. However, the characteristic kinetic parameters that best describe oxidation rates measured for graphite NBG-17 are different than those reported previously for grades H-451 (General Atomics, 1978) and PCEA (ORNL, 2013). In some specific conditions, certain deviations from the generally accepted L-H model were observed for graphite NBG-17. This graphite is manufactured in Germany by SGL Carbon Group and is a possible candidate for the fuel elements and reflector blocks of HTGR.« less

  2. Preparing Adolescents With Chronic Disease for Transition to Adult Care: A Technology Program

    PubMed Central

    Terrones, Laura; Tompane, Trevor; Dillon, Lindsay; Pian, Mark; Gottschalk, Michael; Norman, Gregory J.; Bartholomew, L. Kay

    2014-01-01

    BACKGROUND: Adolescents with chronic disease (ACD) must develop independent disease self-management and learn to communicate effectively with their health care team to transition from pediatric to adult-oriented health care systems. Disease-specific interventions have been implemented to aid specific ACD groups through transition. A generic approach might be effective and cost-saving. METHODS: Eighty-one ACD, aged 12 to 20 years, were recruited for a randomized clinical trial evaluating an 8-month transition intervention (MD2Me). MD2Me recipients received a 2-month intensive Web-based and text-delivered disease management and skill-based intervention followed by a 6-month review period. MD2Me recipients also had access to a texting algorithm for disease assessment and health care team contact. The intervention was applicable to adolescents with diverse chronic illnesses. Controls received mailed materials on general health topics. Disease management, health-related self-efficacy, and health assessments were performed at baseline and at 2 and 8 months. Frequency of patient-initiated communications was recorded over the study period. Outcomes were analyzed according to assigned treatment group over time. RESULTS: MD2Me recipients demonstrated significant improvements in performance of disease management tasks, health-related self-efficacy, and patient-initiated communications compared with controls. CONCLUSIONS: Outcomes in ACD improved significantly among recipients of a generic, technology-based intervention. Technology can deliver transition interventions to adolescents with diverse chronic illnesses, and a generic approach offers a cost-effective means of positively influencing transition outcomes. Further research is needed to determine whether improved short-term outcomes translate into an improved transition for ACD. PMID:24843066

  3. Preparing adolescents with chronic disease for transition to adult care: a technology program.

    PubMed

    Huang, Jeannie S; Terrones, Laura; Tompane, Trevor; Dillon, Lindsay; Pian, Mark; Gottschalk, Michael; Norman, Gregory J; Bartholomew, L Kay

    2014-06-01

    Adolescents with chronic disease (ACD) must develop independent disease self-management and learn to communicate effectively with their health care team to transition from pediatric to adult-oriented health care systems. Disease-specific interventions have been implemented to aid specific ACD groups through transition. A generic approach might be effective and cost-saving. Eighty-one ACD, aged 12 to 20 years, were recruited for a randomized clinical trial evaluating an 8-month transition intervention (MD2Me). MD2Me recipients received a 2-month intensive Web-based and text-delivered disease management and skill-based intervention followed by a 6-month review period. MD2Me recipients also had access to a texting algorithm for disease assessment and health care team contact. The intervention was applicable to adolescents with diverse chronic illnesses. Controls received mailed materials on general health topics. Disease management, health-related self-efficacy, and health assessments were performed at baseline and at 2 and 8 months. Frequency of patient-initiated communications was recorded over the study period. Outcomes were analyzed according to assigned treatment group over time. MD2Me recipients demonstrated significant improvements in performance of disease management tasks, health-related self-efficacy, and patient-initiated communications compared with controls. Outcomes in ACD improved significantly among recipients of a generic, technology-based intervention. Technology can deliver transition interventions to adolescents with diverse chronic illnesses, and a generic approach offers a cost-effective means of positively influencing transition outcomes. Further research is needed to determine whether improved short-term outcomes translate into an improved transition for ACD. Copyright © 2014 by the American Academy of Pediatrics.

  4. Nondestructive Evaluation Technology Working Group Report (IDA/OSD R&M (Institute for Defense Analyses/Office of the Secretary of Defense Reliability and Maintainability Study).

    DTIC Science & Technology

    1983-08-01

    evaluating surface residual stresses in ferromagnetic materials, but until recently has - been considered too time consuming for production application. Fast...generic residual stress , X-ray, image processing, neutron processing, neutron radiography, vibrothermography, nuclear magnetic resonance 20. ABSTRACT...studied, this technology study effort would not have been possible within the time and resources available. P-3 i La

  5. DNA-encoded libraries - an efficient small molecule discovery technology for the biomedical sciences.

    PubMed

    Kunig, Verena; Potowski, Marco; Gohla, Anne; Brunschweiger, Andreas

    2018-06-27

    DNA-encoded compound libraries are a highly attractive technology for the discovery of small molecule protein ligands. These compound collections consist of small molecules covalently connected to individual DNA sequences carrying readable information about the compound structure. DNA-tagging allows for efficient synthesis, handling and interrogation of vast numbers of chemically synthesized, drug-like compounds. They are screened on proteins by an efficient, generic assay based on Darwinian principles of selection. To date, selection of DNA-encoded libraries allowed for the identification of numerous bioactive compounds. Some of these compounds uncovered hitherto unknown allosteric binding sites on target proteins; several compounds proved their value as chemical biology probes unraveling complex biology; and the first examples of clinical candidates that trace their ancestry to a DNA-encoded library were reported. Thus, DNA-encoded libraries proved their value for the biomedical sciences as a generic technology for the identification of bioactive drug-like molecules numerous times. However, large scale experiments showed that even the selection of billions of compounds failed to deliver bioactive compounds for the majority of proteins in an unbiased panel of target proteins. This raises the question of compound library design.

  6. 40 CFR 63.1107 - Equipment leaks: applicability assessment procedures and methods.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Equipment leaks: applicability assessment procedures and methods. 63.1107 Section 63.1107 Protection of Environment ENVIRONMENTAL PROTECTION... Categories: Generic Maximum Achievable Control Technology Standards § 63.1107 Equipment leaks: applicability...

  7. Reinventing the Training Business.

    ERIC Educational Resources Information Center

    Forman, David C.

    2003-01-01

    Discusses steps that companies who develop and distribute technology-based training products need to take in order to be more successful, including focusing on the customer; moving away from large, generic courseware libraries; better pricing schemes; commitment to produce learning outcomes; and partnerships with clients to produce documented…

  8. Generic Verification Protocol for Determination of Emissions from Cleaner Outdoor Wood-Fired Hydronic Heaters

    EPA Science Inventory

    This protocol describes the Environmental Technology Verification Program's considerations and requirements for verification of emissions reduction provided by cleaner outdoor wood-fired hydronic heaters. Outdoor wood-burning units provide heat and hot water for homes and other b...

  9. Generic Protocol for the Verification of Ballast Water Treatment Technology. Version 5.1

    DTIC Science & Technology

    2010-09-01

    the Protocol ..................................................................................... 2 1.4 Verification Testing Process ...Volumes, Containers and Processing .................................................................38 Table 10. Recommendation for Water...or persistent distortion of a measurement process that causes errors in one direction. Challenge Water: Water supplied to a treatment system under

  10. A methodology for the environmental assessment of advanced coal extraction systems

    NASA Technical Reports Server (NTRS)

    Sullivan, P. J.; Hutchinson, C. F.; Makihara, J.; Evensizer, J.

    1980-01-01

    Procedures developed to identify and assess potential environment impacts of advanced mining technology as it moves from a generic concept to a more systems definition are described. Two levels of assessment are defined in terms of the design stage of the technology being evaluated. The first level of analysis is appropriate to a conceptual design. At this level it is assumed that each mining process has known and potential environmental impacts that are generic to each mining activity. By using this assumption, potential environmental impacts can be identified for new mining systems. When two or more systems have been assessed, they can be evaluated comparing potential environmental impacts. At the preliminary stage of design, a systems performance can be assessed again with more precision. At this level of systems definition, potential environmental impacts can be analyzed and their significane determined in a manner to facilitate comparisons between systems. At each level of analysis, suggestions calculated to help the designer mitigate potentially harmful impacts are provided.

  11. Architecture of a prehospital emergency patient care report system (PEPRS).

    PubMed

    Majeed, Raphael W; Stöhr, Mark R; Röhrig, Rainer

    2013-01-01

    In recent years, prehospital emergency care adapted to the technology shift towards tablet computers and mobile computing. In particular, electronic patient care report (e-PCR) systems gained considerable attention and adoption in prehospital emergency medicine [1]. On the other hand, hospital information systems are already widely adopted. Yet, there is no universal solution for integrating prehospital emergency reports into electronic medical records of hospital information systems. Previous projects either relied on proprietary viewing workstations or examined and transferred only data for specific diseases (e.g. stroke patients[2]). Using requirements engineering and a three step software engineering approach, this project presents a generic architecture for integrating prehospital emergency care reports into hospital information systems. Aim of this project is to describe a generic architecture which can be used to implement data transfer and integration of pre hospital emergency care reports to hospital information systems. In summary, the prototype was able to integrate data in a standardized manner. The devised methods can be used design generic software for prehospital to hospital data integration.

  12. Progress in Multi-Disciplinary Data Life Cycle Management

    NASA Astrophysics Data System (ADS)

    Jung, C.; Gasthuber, M.; Giesler, A.; Hardt, M.; Meyer, J.; Prabhune, A.; Rigoll, F.; Schwarz, K.; Streit, A.

    2015-12-01

    Modern science is most often driven by data. Improvements in state-of-the-art technologies and methods in many scientific disciplines lead not only to increasing data rates, but also to the need to improve or even completely overhaul their data life cycle management. Communities usually face two kinds of challenges: generic ones like federated authorization and authentication infrastructures and data preservation, and ones that are specific to their community and their respective data life cycle. In practice, the specific requirements often hinder the use of generic tools and methods. The German Helmholtz Association project ’’Large-Scale Data Management and Analysis” (LSDMA) addresses both challenges: its five Data Life Cycle Labs (DLCLs) closely collaborate with communities in joint research and development to optimize the communities data life cycle management, while its Data Services Integration Team (DSIT) provides generic data tools and services. We present most recent developments and results from the DLCLs covering communities ranging from heavy ion physics and photon science to high-throughput microscopy, and from DSIT.

  13. Summary of Planned Implementation for the HTGR Lessons Learned Applicable to the NGNP

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ian Mckirdy

    2011-09-01

    This document presents a reconciliation of the lessons learned during a 2010 comprehensive evaluation of pertinent lessons learned from past and present high temperature gas-cooled reactors that apply to the Next Generation Nuclear Plant Project along with current and planned activities. The data used are from the latest Idaho National Laboratory research and development plans, the conceptual design report from General Atomics, and the pebble bed reactor technology readiness study from AREVA. Only those lessons related to the structures, systems, and components of the Next Generation Nuclear Plant (NGNP), as documented in the recently updated lessons learned report are addressed.more » These reconciliations are ordered according to plant area, followed by the affected system, subsystem, or component; lesson learned; and finally an NGNP implementation statement. This report (1) provides cross references to the original lessons learned document, (2) describes the lesson learned, (3) provides the current NGNP implementation status with design data needs associated with the lesson learned, (4) identifies the research and development being performed related to the lesson learned, and (5) summarizes with a status of how the lesson learned has been addressed by the NGNP Project.« less

  14. PIE on Safety-Tested Loose Particles from Irradiated Compact 4-4-2

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hunn, John D.; Gerczak, Tyler J.; Morris, Robert Noel

    2016-04-01

    Post-irradiation examination (PIE) is being performed in support of tristructural isotropic (TRISO) coated particle fuel development and qualification for High Temperature Gas-cooled Reactors (HTGRs). This work is sponsored by the Department of Energy Office of Nuclear Energy (DOE-NE) through the Advanced Reactor Technologies (ART) Office under the Advanced Gas Reactor Fuel Development and Qualification (AGR) Program. The AGR-1 experiment was the first in a series of TRISO fuel irradiation tests initiated in 2006. The AGR-1 TRISO particles and fuel compacts were fabricated at Oak Ridge National Laboratory (ORNL) in 2006 using laboratory-scale equipment and irradiated for 3 years in themore » Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) to demonstrate and evaluate fuel performance under HTGR irradiation conditions. Post-irradiation examination was performed at INL and ORNL to study how the fuel behaved during irradiation, and to test fuel performance during exposure to elevated temperatures at or above temperatures that could occur during a depressurized conduction cooldown event. This report summarizes safety testing and post-safety testing PIE conducted at ORNL on loose particles extracted from irradiated AGR-1 Compact 4-4-2.« less

  15. OTV propulsion tecnology programmatic overview

    NASA Astrophysics Data System (ADS)

    Cooper, L. P.

    1984-04-01

    An advanced orbit transfer vehicles (OTV) which will be an integral part of the national space transportation system to carry men and cargo between low Earth orbit and geosynchronous orbit will perform planetary transfers and deliver large acceleration limited space structures to high Earth orbits is reviewed. The establishment of an advanced propulsion technology base for an OTV for the mid 1990's is outlined. The program supports technology for three unique engine concepts. Work is conducted to generic technologies which benefit all three concepts and specific technology which benefits only one of the concepts. Concept and technology definitions to identify propulsion innovations, and subcomponent research to explore and validate their potential benefits are included.

  16. OTV propulsion tecnology programmatic overview

    NASA Technical Reports Server (NTRS)

    Cooper, L. P.

    1984-01-01

    An advanced orbit transfer vehicles (OTV) which will be an integral part of the national space transportation system to carry men and cargo between low Earth orbit and geosynchronous orbit will perform planetary transfers and deliver large acceleration limited space structures to high Earth orbits is reviewed. The establishment of an advanced propulsion technology base for an OTV for the mid 1990's is outlined. The program supports technology for three unique engine concepts. Work is conducted to generic technologies which benefit all three concepts and specific technology which benefits only one of the concepts. Concept and technology definitions to identify propulsion innovations, and subcomponent research to explore and validate their potential benefits are included.

  17. Pharmaceutical technology management--profitable business avenue.

    PubMed

    Puthli, Shivanand P

    2010-01-01

    Growing research expenditure, regulatory framework and generic erosion have forced pharmaceutical companies globally to resort to pharmaceutical technology management (PTM). Indeed, the pharmaceutical industry has witnessed the impact of innovative drug delivery and device technologies and their influence on business. PTM has given a new business insight with greater profits and enhancement of product franchise. Promising breakthrough technologies have not been able to reach a commercial platform largely owing to lack of capital at the preliminary stages of the product development program. Intellectual property plays a considerable role in protecting innovative technologies. Joint ventures and strategic alliances also become important for commercializing a new technology. The synergy of PTM with options of in-licensing is expected to infuse newer opportunities to the pharmaceutical business.

  18. 76 FR 69094 - Christmas Tree Promotion, Research, and Information Order

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-11-08

    ...; provision for reserve funds; provision for credits for generic and branded activities; and assessment of... contributed to the production of Christmas trees. Competition The fresh cut Christmas tree industry competes... promote the use of the Internet and other information technologies to provide increased opportunities for...

  19. Print, Broadcast and Online Convergence in the Newsroom.

    ERIC Educational Resources Information Center

    Hammond, Scott C.; Petersen, Daniel; Thomsen, Steven

    2000-01-01

    Describes how, over five years, students and faculty at Brigham Young University created a converged newsroom that brought together student broadcast, print, and online journalism into one organization. Discusses the industry- and technology-driven rationale for converging newsrooms in educational institutions; describes generic changes and the…

  20. The Shock and Vibration Digest. Volume 17, Number 2

    DTIC Science & Technology

    1985-02-01

    phenomena relative to A computer program has been developed to -.- buildings, bridges, dams, and other struc- simulate the motions of bodies subjected to...1982). (57) Ikushima, T., Honma, T., and Ishiz- uka, H., "Seismic Research on Block-Type (47) Kadle, D.S. and Chwang, A.T., "Hy- HTGR Core ," Nucl...T., "A Seismic Study of High Temperature Gas-Cooled Reactor Core - (48) Yang, C.Y., Chiarito, V., and Dressel, with Block-Type Fuel ; 2nd Rept: An Ana

  1. Contact centers, pervasive computing and telemedicine: a quality health care triangle.

    PubMed

    Maglaveras, Nicos

    2004-01-01

    The Citizen Health System (CHS) is a European Commission (CEC) funded project in the field of IST for Health. Its main goal is to develop a generic contact center which in its pilot stage can be used in the monitoring, treatment and management of chronically ill patients at home in Greece, Spain, and Germany. Such contact centers, using any type of communication technology, and providing timely and preventive prompting to the patients are envisaged in the future to evolve into well-being contact centers providing services to all citizens. In this paper, we present the structure of such a generic contact center and present its major achievements, and their impact to the quality of health delivery.

  2. From space qualified fiber optic gyroscope to generic fiber optic solutions available for space application

    NASA Astrophysics Data System (ADS)

    Buret, Thomas; Ramecourt, David; Napolitano, Fabien

    2017-11-01

    The aim of this article is to present how the qualification of the Fiber Optic Gyroscope technology from IXSEA has been achieved through the qualification of a large range of optical devices and related manufacturing processes. These qualified optical devices and processes, that are now fully mastered by IXSEA through vertical integration of the technology, can be used for other space optical sensors. The example of the SWARM project will be discussed.

  3. Automated support for system's engineering and operations - The development of new paradigms

    NASA Technical Reports Server (NTRS)

    Truszkowski, Walt; Hall, Gardiner A.; Jaworski, Allan; Zoch, David

    1992-01-01

    Technological developments in spacecraft ground operations are reviewed. The technological, operations-oriented, managerial, and economic factors driving the evolution of the Mission Operations Control Center (MOCC), and its predecessor the Operational Control Center are examined. The functional components of the various MOCC subsystems are outlined. A brief overview is given of the concepts behind the The Knowledge-Based Software Engineering Environment, the Generic Spacecraft Analysis Assistant, and the Knowledge From Pictures tool.

  4. The Common Data Acquisition Platform in the Helmholtz Association

    NASA Astrophysics Data System (ADS)

    Kaever, P.; Balzer, M.; Kopmann, A.; Zimmer, M.; Rongen, H.

    2017-04-01

    Various centres of the German Helmholtz Association (HGF) started in 2012 to develop a modular data acquisition (DAQ) platform, covering the entire range from detector readout to data transfer into parallel computing environments. This platform integrates generic hardware components like the multi-purpose HGF-Advanced Mezzanine Card or a smart scientific camera framework, adding user value with Linux drivers and board support packages. Technically the scope comprises the DAQ-chain from FPGA-modules to computing servers, notably frontend-electronics-interfaces, microcontrollers and GPUs with their software plus high-performance data transmission links. The core idea is a generic and component-based approach, enabling the implementation of specific experiment requirements with low effort. This so called DTS-platform will support standards like MTCA.4 in hard- and software to ensure compatibility with commercial components. Its capability to deploy on other crate standards or FPGA-boards with PCI express or Ethernet interfaces remains an essential feature. Competences of the participating centres are coordinated in order to provide a solid technological basis for both research topics in the Helmholtz Programme ``Matter and Technology'': ``Detector Technology and Systems'' and ``Accelerator Research and Development''. The DTS-platform aims at reducing costs and development time and will ensure access to latest technologies for the collaboration. Due to its flexible approach, it has the potential to be applied in other scientific programs.

  5. Where's the C in STEM?

    ERIC Educational Resources Information Center

    Heldman, Bill

    2010-01-01

    With few exceptions, students interact with technology in one way or another every day. And yet, in most U.S. schools, the term "computer science" (CS) refers only to generic skills classes, such as keyboarding and computer applications. Even most Web programming classes usually teach students only how to use conventional graphical user…

  6. Integrating Collaborative and Decentralized Models to Support Ubiquitous Learning

    ERIC Educational Resources Information Center

    Barbosa, Jorge Luis Victória; Barbosa, Débora Nice Ferrari; Rigo, Sandro José; de Oliveira, Jezer Machado; Rabello, Solon Andrade, Jr.

    2014-01-01

    The application of ubiquitous technologies in the improvement of education strategies is called Ubiquitous Learning. This article proposes the integration between two models dedicated to support ubiquitous learning environments, called Global and CoolEdu. CoolEdu is a generic collaboration model for decentralized environments. Global is an…

  7. Distance Education: An Evolving Instructional Technology Application.

    ERIC Educational Resources Information Center

    Dwyer, Francis

    1999-01-01

    Focuses on the several levels of questions that need to be considered before planning and implementing a distance education program. Discusses systems procedures to be followed in developing pilot lessons (modules) prior to "rapid prototyping." Concludes by providing a generic research plan for ensuring the development of sustained quality…

  8. 40 CFR 63.1113 - Procedures for approval of alternative means of emission limitation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Procedures for approval of alternative means of emission limitation. 63.1113 Section 63.1113 Protection of Environment ENVIRONMENTAL PROTECTION... Categories: Generic Maximum Achievable Control Technology Standards § 63.1113 Procedures for approval of...

  9. Integration of a Portfolio-based Approach to Evaluate Aerospace R and D Problem Formulation Into a Parametric Synthesis Tool

    NASA Astrophysics Data System (ADS)

    Oza, Amit R.

    The focus of this study is to improve R&D effectiveness towards aerospace and defense planning in the early stages of the product development lifecycle. Emphasis is on: correct formulation of a decision problem, with special attention to account for data relationships between the individual design problem and the system capability required to size the aircraft, understanding of the meaning of the acquisition strategy objective and subjective data requirements that are required to arrive at a balanced analysis and/or "correct" mix of technology projects, understanding the meaning of the outputs that can be created from the technology analysis, and methods the researcher can use at effectively support decisions at the acquisition and conceptual design levels through utilization of a research and development portfolio strategy. The primary objectives of this study are to: (1) determine what strategy should be used to initialize conceptual design parametric sizing processes during requirements analysis for the materiel solution analysis stage of the product development lifecycle when utilizing data already constructed in the latter phase when working with a generic database management system synthesis tool integration architecture for aircraft design , and (2) assess how these new data relationships can contribute for innovative decision-making when solving acquisition hardware/technology portfolio problems. As such, an automated composable problem formulation system is developed to consider data interactions for the system architecture that manages acquisition pre-design concept refinement portfolio management, and conceptual design parametric sizing requirements. The research includes a way to: • Formalize the data storage and implement the data relationship structure with a system architecture automated through a database management system. • Allow for composable modeling, in terms of level of hardware abstraction, for the product model, mission model, and operational constraint model data blocks in the pre-design stages. • Allow the product model, mission model, and operational constraint model to be cross referenced with a generic aircraft synthesis capability to identify disciplinary analysis methods and processes. • Allow for matching, comparison, and balancing of the aircraft hardware portfolio to the associated developmental and technology risk metrics. • Allow for visualization technology portfolio decision space. The problem formulation architecture is finally implemented and verified for a generic hypersonic vehicle research demonstrator where a portfolio of technology hardware are measured for developmental and technology risks, prioritized by the researcher risk constraints, and the data generated delivered to a novel aircraft synthesis tool to confirm vehicle feasibility.

  10. Fractal geometry as a new approach for proving nanosimilarity: a reflection note.

    PubMed

    Demetzos, Costas; Pippa, Natassa

    2015-04-10

    Nanosimilars are considered as new medicinal outcomes combining the generic drugs and the nanocarrier as an innovative excipient, in order to evaluate them as final products. They belong to the grey area - concerning the evaluation process - between generic drugs and biosimilar medicinal products. Generic drugs are well documented and a huge number of them are in market, replacing effectively the off-patent drugs. The scientific approach for releasing them to the market is based on bioequivalence studies, which are well documented and accepted by the regulatory agencies. On the other hand, the structural complexity of biological/biotechnology-derived products demands a new approach for the approval process taking into consideration that bioequivalence studies are not considered as sufficient as in generic drugs, and new clinical trials are needed to support their approval process of the product to the market. In proportion, due to technological complexity of nanomedicines, the approaches for proving the statistical identity or the similarity for generic and biosimilar products, respectively, with those of prototypes, are not considered as effective for nanosimilar products. The aim of this note is to propose a complementary approach which can provide realistic evidences concerning the nanosimilarity, based on fractal analysis. This approach is well fit with the structural complexity of nanomedicines and smooths the difficulties for proving the similarity between off-patent and nanosimilar products. Fractal analysis could be considered as the approach that completely characterizes the physicochemical/morphological characteristics of nanosimilar products and could be proposed as a start point for a deep discussion on nanosimilarity. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Micromachining technology for thermal ink-jet products

    NASA Astrophysics Data System (ADS)

    Verdonckt-Vandebroek, Sophie

    1997-09-01

    This paper reviews recent trends and evolutions in the low- end color printing market which is currently dominated by thermal inkjet (TIJ) based products. Micro electromechanical systems technology has been an enabler for the unprecedented cost/performance ratio of these printing products. The generic TIJ operating principles are based on an intimate blend of thermodynamics, fluid dynamics and LSI electronics. The key principles and design issues are outlined and the fabrication of TIJ printheads illustrated with an implementation by the Xerox Corporation.

  12. COMPASS: A general purpose computer aided scheduling tool

    NASA Technical Reports Server (NTRS)

    Mcmahon, Mary Beth; Fox, Barry; Culbert, Chris

    1991-01-01

    COMPASS is a generic scheduling system developed by McDonnell Douglas under the direction of the Software Technology Branch at JSC. COMPASS is intended to illustrate the latest advances in scheduling technology and provide a basis from which custom scheduling systems can be built. COMPASS was written in Ada to promote readability and to conform to potential NASA Space Station Freedom standards. COMPASS has some unique characteristics that distinguishes it from commercial products. These characteristics are discussed and used to illustrate some differences between scheduling tools.

  13. COMPASS: An Ada based scheduler

    NASA Technical Reports Server (NTRS)

    Mcmahon, Mary Beth; Culbert, Chris

    1992-01-01

    COMPASS is a generic scheduling system developed by McDonnell Douglas and funded by the Software Technology Branch of NASA Johnson Space Center. The motivation behind COMPASS is to illustrate scheduling technology and provide a basis from which custom scheduling systems can be built. COMPASS was written in Ada to promote readability and to conform to DOD standards. COMPASS has some unique characteristics that distinguishes it from commercial products. This paper discusses these characteristics and uses them to illustrate some differences between scheduling tools.

  14. A Plan for the Development and Demonstration of Optical Communications for Deep Space

    NASA Technical Reports Server (NTRS)

    Lesh, J. R.; Deutsch, L. J.; Weber, W. J.

    1990-01-01

    In this article, an overall plan for the development and demonstration of optical communications for deep-space applications is presented. The current state of the technology for optical communications is presented. Then, the development and demonstration plan is presented in two parts: the overall major systems activities, followed by the generic technology developments that will enable them. The plan covers the path from laboratory subsystems demonstrations out to a full-scale flight experiment system for the proposed Mars Communications Relay Orbiter mission.

  15. Slewing control experiment for a flexible panel

    NASA Technical Reports Server (NTRS)

    Juang, Jer-Nan

    1987-01-01

    Technology areas are identified in which better analytical and/or experimental methods are needed to adequately and accurately control the dynamic responses of multibody space platforms such as the space station. A generic space station solar panel is used to experimentally evaluate current control technologies. Active suppression of solar panel vibrations induced by large angle maneuvers is studied with a torque actuator at the root of the solar panel. These active suppression tests will identify the hardware requirements and adequacy of various controller designs.

  16. A Generic Fusion Tool on Command Control of C4ISR Simulations

    DTIC Science & Technology

    2006-12-01

    Sarı, Şeref Paşalıoğlu TUBITAK , Marmara Research Center, Information Technologies Research Institute Gebze, Kocaeli TURKEY {name.surname...bte.mam.gov.tr; www.mam.gov.tr Cüneyd Fırat C2Tech A.Ş., TUBITAK , TEKSEB, C 210, Gebze, Kocaeli TURKEY firat@ctech.com.tr; www.ctech.com.tr ABSTRACT We...NAME(S) AND ADDRESS(ES) TUBITAK , Marmara Research Center, Information Technologies Research Institute Gebze, Kocaeli TURKEY 8. PERFORMING

  17. Switched-capacitor realization of presynaptic short-term-plasticity and stop-learning synapses in 28 nm CMOS.

    PubMed

    Noack, Marko; Partzsch, Johannes; Mayr, Christian G; Hänzsche, Stefan; Scholze, Stefan; Höppner, Sebastian; Ellguth, Georg; Schüffny, Rene

    2015-01-01

    Synaptic dynamics, such as long- and short-term plasticity, play an important role in the complexity and biological realism achievable when running neural networks on a neuromorphic IC. For example, they endow the IC with an ability to adapt and learn from its environment. In order to achieve the millisecond to second time constants required for these synaptic dynamics, analog subthreshold circuits are usually employed. However, due to process variation and leakage problems, it is almost impossible to port these types of circuits to modern sub-100nm technologies. In contrast, we present a neuromorphic system in a 28 nm CMOS process that employs switched capacitor (SC) circuits to implement 128 short term plasticity presynapses as well as 8192 stop-learning synapses. The neuromorphic system consumes an area of 0.36 mm(2) and runs at a power consumption of 1.9 mW. The circuit makes use of a technique for minimizing leakage effects allowing for real-time operation with time constants up to several seconds. Since we rely on SC techniques for all calculations, the system is composed of only generic mixed-signal building blocks. These generic building blocks make the system easy to port between technologies and the large digital circuit part inherent in an SC system benefits fully from technology scaling.

  18. Sub-millimetre-wave and far infrared ESA missions with a focus on antenna technologies

    NASA Astrophysics Data System (ADS)

    de Maagt, Peter; Polegre, Arturo; Crone, Gerry

    2017-11-01

    The are of (sub)millimetre wave and far-infrared antenna technology is a very dynamic sector in electromagnetics. Several future ESA missions have been planned and their requirements are pushing the limits of existing technologies. Feasibility studies have provided baseline concepts, which have helped to grasp the main features of these instruments and to identify their critical aspects. A number of scientific and technical activities have then followed, dedicated to specific topics. The paper discusses (sub)millimetre wave and far-infrared Earth observation and astronomical instruments. Furthermore, generic technology work carried out in the frame of ESA contracts, applicable to this frequency range, is reported on.

  19. Status of Chronic Oxidation Studies of Graphite

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Contescu, Cristian I.; Mee, Robert W.

    Graphite will undergo extremely slow, but continuous oxidation by traces of moisture that will be present, albeit at very low levels, in the helium coolant of HTGR. This chronic oxidation may cause degradation of mechanical strength and thermal properties of graphite components if a porous oxidation layer penetrates deep enough in the bulk of graphite components during the lifetime of the reactor. The current research on graphite chronic oxidation is motivated by the acute need to understand the behavior of each graphite grade during prolonged exposure to high temperature chemical attack by moisture. The goal is to provide the elementsmore » needed to develop predictive models for long-time oxidation behavior of graphite components in the cooling helium of HTGR. The tasks derived from this goal are: (1) Oxidation rate measurements in order to determine and validate a comprehensive kinetic model suitable for prediction of intrinsic oxidation rates as a function of temperature and oxidant gas composition; (2) Characterization of effective diffusivity of water vapor in the graphite pore system in order to account for the in-pore transport of moisture; and (3) Development and validation of a predictive model for the penetration depth of the oxidized layer, in order to assess the risk of oxidation caused damage of particular graphite grades after prolonged exposure to the environment of helium coolant in HTGR. The most important and most time consuming of these tasks is the measurement of oxidation rates in accelerated oxidation tests (but still under kinetic control) and the development of a reliable kinetic model. This report summarizes the status of chronic oxidation studies on graphite, and then focuses on model development activities, progress of kinetic measurements, validation of results, and improvement of the kinetic models. Analysis of current and past results obtained with three grades of showed that the classical Langmuir-Hinshelwood model cannot reproduce all data collected so far. Starting from here we propose a modification of the LH model to include temperature activation of graphite surface as a Boltzmann activation function. The enhanced Boltzmann-Langmuir-Hinshelwood model (BLH) was tested successfully on three grades of graphite. The model is a robust, comprehensive mathematical function that allows better fitting of experimental results spanning a wide range of temperature and partial pressures of water vapor and hydrogen. However, the model did not fit satisfactorily the data extracted from the old report on graphite H-451 oxidation by water.« less

  20. The HTA core model: a novel method for producing and reporting health technology assessments.

    PubMed

    Lampe, Kristian; Mäkelä, Marjukka; Garrido, Marcial Velasco; Anttila, Heidi; Autti-Rämö, Ilona; Hicks, Nicholas J; Hofmann, Björn; Koivisto, Juha; Kunz, Regina; Kärki, Pia; Malmivaara, Antti; Meiesaar, Kersti; Reiman-Möttönen, Päivi; Norderhaug, Inger; Pasternack, Iris; Ruano-Ravina, Alberto; Räsänen, Pirjo; Saalasti-Koskinen, Ulla; Saarni, Samuli I; Walin, Laura; Kristensen, Finn Børlum

    2009-12-01

    The aim of this study was to develop and test a generic framework to enable international collaboration for producing and sharing results of health technology assessments (HTAs). Ten international teams constructed the HTA Core Model, dividing information contained in a comprehensive HTA into standardized pieces, the assessment elements. Each element contains a generic issue that is translated into practical research questions while performing an assessment. Elements were described in detail in element cards. Two pilot assessments, designated as Core HTAs were also produced. The Model and Core HTAs were both validated. Guidance on the use of the HTA Core Model was compiled into a Handbook. The HTA Core Model considers health technologies through nine domains. Two applications of the Model were developed, one for medical and surgical interventions and another for diagnostic technologies. Two Core HTAs were produced in parallel with developing the model, providing the first real-life testing of the Model and input for further development. The results of formal validation and public feedback were primarily positive. Development needs were also identified and considered. An online Handbook is available. The HTA Core Model is a novel approach to HTA. It enables effective international production and sharing of HTA results in a structured format. The face validity of the Model was confirmed during the project, but further testing and refining are needed to ensure optimal usefulness and user-friendliness. Core HTAs are intended to serve as a basis for local HTA reports. Core HTAs do not contain recommendations on technology use.

  1. Study of electrical and chemical propulsion systems for auxiliary propulsion of large space systems, volume 2

    NASA Technical Reports Server (NTRS)

    Smith, W. W.

    1981-01-01

    The five major tasks of the program are reported. Task 1 is a literature search followed by selection and definition of seven generic spacecraft classes. Task 2 covers the determination and description of important disturbance effects. Task 3 applies the disturbances to the generic spacecraft and adds maneuver and stationkeeping functions to define total auxiliary propulsion systems requirements for control. The important auxiliary propulsion system characteristics are identified and sensitivities to control functions and large space system characteristics determined. In Task 4, these sensitivities are quantified and the optimum auxiliary propulsion system characteristics determined. Task 5 compares the desired characteristics with those available for both electrical and chemical auxiliary propulsion systems to identify the directions technology advances should take.

  2. Evolving Relationship Structures in Multi-sourcing Arrangements: The Case of Mission Critical Outsourcing

    NASA Astrophysics Data System (ADS)

    Heitlager, Ilja; Helms, Remko; Brinkkemper, Sjaak

    Information Technology Outsourcing practice and research mainly considers the outsourcing phenomenon as a generic fulfilment of the IT function by external parties. Inspired by the logic of commodity, core competencies and economies of scale; assets, existing departments and IT functions are transferred to external parties. Although the generic approach might work for desktop outsourcing, where standardisation is the dominant factor, it does not work for the management of mission critical applications. Managing mission critical applications requires a different approach where building relationships is critical. The relationships involve inter and intra organisational parties in a multi-sourcing arrangement, called an IT service chain, consisting of multiple (specialist) parties that have to collaborate closely to deliver high quality services.

  3. Cost-Effectiveness of Evaluating the New Technologies.

    ERIC Educational Resources Information Center

    Kastner, Theodore A.

    1997-01-01

    This commentary on a study comparing use of the brand name drug Depakene with generic valproic acid to control seizures in people with mental retardation focuses on issues of cost-effectiveness. It notes existing guidelines for pharmacoeconomic evaluation and suggests a possible model to include a threshold price (per quality-adjusted life year)…

  4. Modifying ADDIE: Incorporating New Technologies in Library Instruction

    ERIC Educational Resources Information Center

    Campbell, Paul Clayton

    2014-01-01

    There are many instructional design theories to assist librarians in creating effective instructional modules for student learning. ADDIE is a generic instructional design model that has been in existence for more than 30 years and is known for its flexibility in application (Molenda, 2003). Using instructional design theories such as ADDIE helps…

  5. RFID: A Revolution in Automatic Data Recognition

    ERIC Educational Resources Information Center

    Deal, Walter F., III

    2004-01-01

    Radio frequency identification, or RFID, is a generic term for technologies that use radio waves to automatically identify people or objects. There are several methods of identification, but the most common is to store a serial number that identifies a person or object, and perhaps other information, on a microchip that is attached to an antenna…

  6. The Theatre of Fast Knowledge: Performative Epistemologies in Higher Education

    ERIC Educational Resources Information Center

    Besley, Tina; Peters, Michael A.

    2005-01-01

    Fast knowledge can be considered part of fast capitalism, especially an emergent new generic form of capitalism based increasingly on forms of symbolic capital associated with the rise of global finance and associated with new information and communication technologies. In this essay, the authors first theorise fast knowledge in relation to fast…

  7. Devising and Implementing a Suitable Graduate Education Platform for Dublin's Institute of Technology (DIT)

    ERIC Educational Resources Information Center

    Carton, Janet; Jerrams, Steve

    2008-01-01

    Graduate education platforms have received general acclaim as key components in the future structural development of third-level and fourth-level education in Europe. In Ireland the Higher Education Authority (HEA) has endorsed the restructuring of postgraduate education to incorporate the training of research students in key generic and…

  8. Matching of Developed Generic Competences of Graduates in Higher Education with Labour Market Needs

    ERIC Educational Resources Information Center

    Pukelis, Kestutis; Pileicikiene, Nora

    2012-01-01

    Higher education provides graduates with both monetary and non-monetary benefits. Globalization and technological developments foster utilitarian approach, therefore the transmission of competences that are relevant in labour market is an important target for higher education institutions. The paper presents findings of research on the match of…

  9. Individualized Health Care Plans: Supporting Children With Chronic Conditions in the Classroom

    ERIC Educational Resources Information Center

    Hopkins, Amanda F.; Hughes, Mary-alayne

    2016-01-01

    Due to the major advances in technology and the sciences, advances in the medical treatment options for children with chronic conditions are being made at an astonishing rate. In the health care field, "children with chronic conditions" is a generic phrase that typically refers to children with physical, developmental, behavioral, or…

  10. Acetal Resins, Acrylic & Modacrylic Fibers, Carbon Black, Hydrogen Fluoride, Polycarbonate, Ethylene, Spandex & Cyanide Chemical Manufacturing: NESHAP for Source Categories, Generic Maximum Achievable Control Technology Standards (40 CFR 63, Subpart YY)

    EPA Pesticide Factsheets

    Learn about the NESHAP for GMACT for acetal resins, hydrogen fluoride, polycarbonate, ethylene production and cyanide chemicals. Find the rule history information, federal register citations, legal authority, rule summary, and additional resources

  11. The Role of Interest and Images in Slideware Presentations

    ERIC Educational Resources Information Center

    Tangen, Jason M.; Constable, Merryn D.; Durrant, Eric; Teeter, Chris; Beston, Brett R.; Kim, Joseph A.

    2011-01-01

    With the advent of technologies that allow lecturers to develop presentations using software such as Microsoft PowerPoint, Apple Keynote, and OpenOffice Impress (referred to generically here as "slideware"), lectures and meetings are beginning to resemble cinematic experiences rather than the text filled transactions that have been the norm for…

  12. A generic approach for vertical integration of nanowires.

    PubMed

    Latu-Romain, E; Gilet, P; Noel, P; Garcia, J; Ferret, P; Rosina, M; Feuillet, G; Lévy, F; Chelnokov, A

    2008-08-27

    We report on the collective integration technology of vertically aligned nanowires (NWs). Si and ZnO NWs have been used in order to develop a generic technological process. Both mineral and organic planarizations of the as-grown nanowires have been achieved. Chemical vapour deposition (CVD) oxides, spin on glass (SOG), and polymer have been investigated as filling materials. Polishing and/or etching of the composite structures have been set up so as to obtain a suitable morphology for the top and bottom electrical contacts. Electrical and optical characterizations of the integrated NWs have been performed. Contacts ohmicity has been demonstrated and specific contact resistances have been reported. The photoconducting properties of polymer-integrated ZnO NWs have also been investigated in the UV-visible range through collective electrical contacts. A small increase of the resistivity in the ZnO NWs under sub-bandgap illumination has been observed and discussed. A comparison of the photoluminescence (PL) spectra at 300 K of the as-grown and SOG-integrated ZnO nanowires has shown no significant impact of the integration process on the crystal quality of the NWs.

  13. ISART: A Generic Framework for Searching Books with Social Information

    PubMed Central

    Cui, Xiao-Ping; Qu, Jiao; Geng, Bin; Zhou, Fang; Song, Li; Hao, Hong-Wei

    2016-01-01

    Effective book search has been discussed for decades and is still future-proof in areas as diverse as computer science, informatics, e-commerce and even culture and arts. A variety of social information contents (e.g, ratings, tags and reviews) emerge with the huge number of books on the Web, but how they are utilized for searching and finding books is seldom investigated. Here we develop an Integrated Search And Recommendation Technology (IsArt), which breaks new ground by providing a generic framework for searching books with rich social information. IsArt comprises a search engine to rank books with book contents and professional metadata, a Generalized Content-based Filtering model to thereafter rerank books with user-generated social contents, and a learning-to-rank technique to finally combine a wide range of diverse reranking results. Experiments show that this technology permits embedding social information to promote book search effectiveness, and IsArt, by making use of it, has the best performance on CLEF/INEX Social Book Search Evaluation datasets of all 4 years (from 2011 to 2014), compared with some other state-of-the-art methods. PMID:26863545

  14. ISART: A Generic Framework for Searching Books with Social Information.

    PubMed

    Yin, Xu-Cheng; Zhang, Bo-Wen; Cui, Xiao-Ping; Qu, Jiao; Geng, Bin; Zhou, Fang; Song, Li; Hao, Hong-Wei

    2016-01-01

    Effective book search has been discussed for decades and is still future-proof in areas as diverse as computer science, informatics, e-commerce and even culture and arts. A variety of social information contents (e.g, ratings, tags and reviews) emerge with the huge number of books on the Web, but how they are utilized for searching and finding books is seldom investigated. Here we develop an Integrated Search And Recommendation Technology (IsArt), which breaks new ground by providing a generic framework for searching books with rich social information. IsArt comprises a search engine to rank books with book contents and professional metadata, a Generalized Content-based Filtering model to thereafter rerank books with user-generated social contents, and a learning-to-rank technique to finally combine a wide range of diverse reranking results. Experiments show that this technology permits embedding social information to promote book search effectiveness, and IsArt, by making use of it, has the best performance on CLEF/INEX Social Book Search Evaluation datasets of all 4 years (from 2011 to 2014), compared with some other state-of-the-art methods.

  15. Assessment of industrial attitudes toward generic research needs in tribology

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sibley, L.B.; Zlotnick, M.; Levinson, T.M.

    Based on extended discussions during visits with 27 companies representing 13 different parts of the tribology industry (such as bearings, lubricants, coatings, powerplants), it is apparent that only a tiny fraction of the large sums publicly reported as R and D expenditures by industry are used to fund generic tribology research. For example, of the greater than $2 B expenditures reported for R and D in the lubricants sector for 1982, the estimated total for generic tribology research was $12 M. This was the largest expenditure in any sector of the tribology industry and one-third of the total of $36more » M. In the automotive industry out of a reported expenditure of $4 B, the estimated generic tribology research was $3 M. In some segments of the tribology industry, for example coatings and filters, there were no expenditures on generic research. There was little tendency to improve the state of the art of the tribology industry through long-term investment in generic R and D in ways that would foster innovation and productivity of energy conservation technology. Expenditures were oriented to development of specific commercial and military products, or to basic research focused on unspecified far term results, although useful spin-off of military developments into commercial fields sometimes occurs. There was a broad consensus in the companies visited that existing research results were not always made easily accessible to potential users in industry. The implication was that industry might benefit more if a larger fraction of the funds were devoted to putting the research results into a form design and development engineers could more readily apply. The need for a more effective presentation of research results was expressed with greater urgency at the smaller companies, but there seemed to be a broad consensus on the need for improvement. Recommendations are given.« less

  16. Knowledge mobilisation in healthcare: a critical review of health sector and generic management literature.

    PubMed

    Ferlie, Ewan; Crilly, Tessa; Jashapara, Ashok; Peckham, Anna

    2012-04-01

    The health policy domain has displayed increasing interest in questions of knowledge management and knowledge mobilisation within healthcare organisations. We analyse here the findings of a critical review of generic management and health-related literatures, covering the period 2000-2008. Using 29 pre-selected journals, supplemented by a search of selected electronic databases, we map twelve substantive domains classified into four broad groups: taxonomic and philosophical (e.g. different types of knowledge); theoretical discourse (e.g. critical organisational studies); disciplinary fields (e.g. organisational learning and Information Systems/Information Technology); and organisational processes and structures (e.g. organisational form). We explore cross-overs and gaps between these traditionally separate literature streams. We found that health sector literature has absorbed some generic concepts, notably Communities of Practice, but has not yet deployed the performance-oriented perspective of the Resource Based View (RBV) of the Firm. The generic literature uses healthcare sites to develop critical analyses of power and control in knowledge management, rooted in neo-Marxist/labour process and Foucauldian approaches. The review generates three theoretically grounded statements to inform future enquiry, by: (a) importing the RBV stream; (b) developing the critical organisational studies perspective further; and (c) exploring the theoretical argument that networks and other alternative organisational forms facilitate knowledge sharing. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

    NASA Technical Reports Server (NTRS)

    Baresi, Larry

    1989-01-01

    The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

  18. ECUT (Energy Conversion and Utilization Technologies) program: Biocatalysis project

    NASA Astrophysics Data System (ADS)

    Baresi, Larry

    1989-03-01

    The Annual Report presents the fiscal year (FY) 1988 research activities and accomplishments, for the Biocatalysis Project of the U.S. Department of Energy, Energy Conversion and Utilization Technologies (ECUT) Division. The ECUT Biocatalysis Project is managed by the Jet Propulsion Laboratory, California Institute of Technology. The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of universities, industrial companies and government research laboratories. The Project's technical activities were organized into three work elements: (1) The Molecular Modeling and Applied Genetics work element includes research on modeling of biological systems, developing rigorous methods for the prediction of three-dimensional (tertiary) protein structure from the amino acid sequence (primary structure) for designing new biocatalysis, defining kinetic models of biocatalyst reactivity, and developing genetically engineered solutions to the generic technical barriers that preclude widespread application of biocatalysis. (2) The Bioprocess Engineering work element supports efforts in novel bioreactor concepts that are likely to lead to substantially higher levels of reactor productivity, product yields and lower separation energetics. Results of work within this work element will be used to establish the technical feasibility of critical bioprocess monitoring and control subsystems. (3) The Bioprocess Design and Assessment work element attempts to develop procedures (via user-friendly computer software) for assessing the energy-economics of biocatalyzed chemical production processes, and initiation of technology transfer for advanced bioprocesses.

  19. MFPG. The Role of Coatings in the Prevention of Mechanical Failures. Proceedings of the 23rd Meeting of the Mechanical Failures Prevention Group, Held at the National Bureau of Standards, Gaithersburg, Maryland on October 29-31, 1975

    DTIC Science & Technology

    1976-09-01

    testing evaluation and production process development . This coated microspherical fuel particle has been successfully developed over a period of...this reliable concept began with attempts to blend ceramic (oxide or carbide) fuel powders into a graphite matrix in the early concepts of ROVER, HTGR ...lubricants. An ongoing program at the Naval Air Development Center is investigating how some parameters affect corro- sion between solid film

  20. Briefing Book. Volume 1: The Evolution of the Nuclear Non-Proliferation Regime (Fourth Edition).

    DTIC Science & Technology

    1998-01-01

    usually termed) nuclear reactors. The first of these is that they contain a core or mass of fissile material (the fuel ) which may weigh tens of tons... HTGR is cooled with helium gas and moderated with graphite. Highly enriched uranium is used as fuel (93 per cent U-235), though this may be mixed with...to convert U-238 in a blanket around the core into Pu-239 at a rate faster than its own consumption of fissile material. They thus produce more fuel

  1. Composite Materials

    NASA Technical Reports Server (NTRS)

    1988-01-01

    Langley Research Center researchers invented an advanced polymer, a chemical compound formed by uniting many small molecules to create a complex molecule with different chemical properties. The material is a thermoplastic polyimide that resists solvents. Other polymers of this generic type are soluble in solvents, thus cannot be used where solvents are present. High Technology Services (HTS), Inc. licensed technology and is engaged in development and manufacture of high performance plastics, resins and composite materials. Techimer Materials Division is using technology for composite matrix resins that offer heat resistance and protection from radiation, electrical and chemical degradation. Applications of new polymer include molding resins, adhesives and matrix resins for fiber reinforced composites.

  2. Malware distributed collection and pre-classification system using honeypot technology

    NASA Astrophysics Data System (ADS)

    Grégio, André R. A.; Oliveira, Isabela L.; Santos, Rafael D. C.; Cansian, Adriano M.; de Geus, Paulo L.

    2009-04-01

    Malware has become a major threat in the last years due to the ease of spread through the Internet. Malware detection has become difficult with the use of compression, polymorphic methods and techniques to detect and disable security software. Those and other obfuscation techniques pose a problem for detection and classification schemes that analyze malware behavior. In this paper we propose a distributed architecture to improve malware collection using different honeypot technologies to increase the variety of malware collected. We also present a daemon tool developed to grab malware distributed through spam and a pre-classification technique that uses antivirus technology to separate malware in generic classes.

  3. Generic Divide and Conquer Internet-Based Computing

    NASA Technical Reports Server (NTRS)

    Radenski, Atanas; Follen, Gregory J. (Technical Monitor)

    2001-01-01

    The rapid growth of internet-based applications and the proliferation of networking technologies have been transforming traditional commercial application areas as well as computer and computational sciences and engineering. This growth stimulates the exploration of new, internet-oriented software technologies that can open new research and application opportunities not only for the commercial world, but also for the scientific and high -performance computing applications community. The general goal of this research project is to contribute to better understanding of the transition to internet-based high -performance computing and to develop solutions for some of the difficulties of this transition. More specifically, our goal is to design an architecture for generic divide and conquer internet-based computing, to develop a portable implementation of this architecture, to create an example library of high-performance divide-and-conquer computing agents that run on top of this architecture, and to evaluate the performance of these agents. We have been designing an architecture that incorporates a master task-pool server and utilizes satellite computational servers that operate on the Internet in a dynamically changing large configuration of lower-end nodes provided by volunteer contributors. Our designed architecture is intended to be complementary to and accessible from computational grids such as Globus, Legion, and Condor. Grids provide remote access to existing high-end computing resources; in contrast, our goal is to utilize idle processor time of lower-end internet nodes. Our project is focused on a generic divide-and-conquer paradigm and its applications that operate on a loose and ever changing pool of lower-end internet nodes.

  4. A generic bio-economic farm model for environmental and economic assessment of agricultural systems.

    PubMed

    Janssen, Sander; Louhichi, Kamel; Kanellopoulos, Argyris; Zander, Peter; Flichman, Guillermo; Hengsdijk, Huib; Meuter, Eelco; Andersen, Erling; Belhouchette, Hatem; Blanco, Maria; Borkowski, Nina; Heckelei, Thomas; Hecker, Martin; Li, Hongtao; Oude Lansink, Alfons; Stokstad, Grete; Thorne, Peter; van Keulen, Herman; van Ittersum, Martin K

    2010-12-01

    Bio-economic farm models are tools to evaluate ex-post or to assess ex-ante the impact of policy and technology change on agriculture, economics and environment. Recently, various BEFMs have been developed, often for one purpose or location, but hardly any of these models are re-used later for other purposes or locations. The Farm System Simulator (FSSIM) provides a generic framework enabling the application of BEFMs under various situations and for different purposes (generating supply response functions and detailed regional or farm type assessments). FSSIM is set up as a component-based framework with components representing farmer objectives, risk, calibration, policies, current activities, alternative activities and different types of activities (e.g., annual and perennial cropping and livestock). The generic nature of FSSIM is evaluated using five criteria by examining its applications. FSSIM has been applied for different climate zones and soil types (criterion 1) and to a range of different farm types (criterion 2) with different specializations, intensities and sizes. In most applications FSSIM has been used to assess the effects of policy changes and in two applications to assess the impact of technological innovations (criterion 3). In the various applications, different data sources, level of detail (e.g., criterion 4) and model configurations have been used. FSSIM has been linked to an economic and several biophysical models (criterion 5). The model is available for applications to other conditions and research issues, and it is open to be further tested and to be extended with new components, indicators or linkages to other models.

  5. A Generic Bio-Economic Farm Model for Environmental and Economic Assessment of Agricultural Systems

    PubMed Central

    Louhichi, Kamel; Kanellopoulos, Argyris; Zander, Peter; Flichman, Guillermo; Hengsdijk, Huib; Meuter, Eelco; Andersen, Erling; Belhouchette, Hatem; Blanco, Maria; Borkowski, Nina; Heckelei, Thomas; Hecker, Martin; Li, Hongtao; Oude Lansink, Alfons; Stokstad, Grete; Thorne, Peter; van Keulen, Herman; van Ittersum, Martin K.

    2010-01-01

    Bio-economic farm models are tools to evaluate ex-post or to assess ex-ante the impact of policy and technology change on agriculture, economics and environment. Recently, various BEFMs have been developed, often for one purpose or location, but hardly any of these models are re-used later for other purposes or locations. The Farm System Simulator (FSSIM) provides a generic framework enabling the application of BEFMs under various situations and for different purposes (generating supply response functions and detailed regional or farm type assessments). FSSIM is set up as a component-based framework with components representing farmer objectives, risk, calibration, policies, current activities, alternative activities and different types of activities (e.g., annual and perennial cropping and livestock). The generic nature of FSSIM is evaluated using five criteria by examining its applications. FSSIM has been applied for different climate zones and soil types (criterion 1) and to a range of different farm types (criterion 2) with different specializations, intensities and sizes. In most applications FSSIM has been used to assess the effects of policy changes and in two applications to assess the impact of technological innovations (criterion 3). In the various applications, different data sources, level of detail (e.g., criterion 4) and model configurations have been used. FSSIM has been linked to an economic and several biophysical models (criterion 5). The model is available for applications to other conditions and research issues, and it is open to be further tested and to be extended with new components, indicators or linkages to other models. PMID:21113782

  6. Simulated procedure rehearsal is more effective than a preoperative generic warm-up for endovascular procedures.

    PubMed

    Willaert, Willem I M; Aggarwal, Rajesh; Daruwalla, Farhad; Van Herzeele, Isabelle; Darzi, Ara W; Vermassen, Frank E; Cheshire, Nicholas J

    2012-06-01

    Patient-specific simulated rehearsal (PsR) of a carotid artery stenting procedure (CAS) enables the interventionalist to rehearse the case before performing the procedure on the actual patient by incorporating patient-specific computed tomographic data into the simulation software. This study aimed to evaluate whether PsR of a CAS procedure can enhance the operative performance versus a virtual reality (VR) generic CAS warm-up procedure or no preparation at all. During a 10-session cognitive/technical VR course, medical residents were trained in CAS. Thereafter, in a randomized crossover study, each participant performed a patient-specific CAS case 3 times on the simulator, preceded by 3 different tasks: a PsR, a generic case, or no preparation. Technical performances were assessed using simulator-based metrics and expert-based ratings. Twenty medical residents (surgery, cardiology, radiology) were recruited. Training plateaus were observed after 10 sessions for all participants. Performances were significantly better after PsR than after a generic warm-up or no warm-up for total procedure time (16.3 ± 0.6 vs 19.7 ± 1.0 vs 20.9 ± 1.1 minutes, P = 0.001) and fluoroscopy time (9.3 ± 0.1 vs 11.2 ± 0.6 vs 11.2 ± 0.5 minutes, P = 0.022) but did not influence contrast volume or number of roadmaps used during the "real" case. PsR significantly improved the quality of performance as measured by the expert-based ratings (scores 28 vs 25 vs 25, P = 0.020). Patient-specific simulated rehearsal of a CAS procedure significantly improves operative performance, compared to a generic VR warm-up or no warm-up. This technology requires further investigation with respect to improved outcomes on patients in the clinical setting.

  7. On-orbit technology experiment facility definition

    NASA Technical Reports Server (NTRS)

    Russell, Richard A.; Buchan, Robert W.; Gates, Richard M.

    1988-01-01

    A study was conducted to identify on-orbit integrated facility needs to support in-space technology experiments on the Space Station and associated free flyers. In particular, the first task was to examine the proposed technology development missions (TDMX's) from the model mission set and other proposed experimental facilities, both individually and by theme, to determine how and if the experiments might be combined, what equipment might be shared, what equipment might be used as generic equipment for continued experimentation, and what experiments will conflict with the conduct of other experiments or Space Station operations. Then using these results, to determine on-orbit facility needs to optimize the implementation of technology payloads. Finally, to develop one or more scenarios, design concepts, and outfitting requirements for implementation of onboard technology experiments.

  8. Development of Composite Technologies for the European Next Generation Launcher

    NASA Astrophysics Data System (ADS)

    Fatemi, Javad; van der Bas, Finn

    2014-06-01

    In the frame of the European Space Agency's Future Launchers Preparatory Programme (FLPP), in conjunction with national Research and Technology programs, Dutch Space has undertaken the development of composite technologies for application in the Europe's next generation launcher, Ariane 6. The efforts have focused on development of a Carbon Fibre Reinforced Plastic (CFRP) Engine Thrust Frame (ETF) for the upper-stage of Ariane6 launcher. These new technologies are expected to improve performance and to lower cost of development and exploitation of the launcher. Although the first targeted application is the thrust frame, the developed technologies are set to be generic in the sense that they can be applied to other structures of the launcher, e.g. inter-stage structures.This paper addresses the design, analysis, manufacturing and testing activities related to the composite technology developments.

  9. NASA R and T aerospace plane vehicles: Progress and plans

    NASA Technical Reports Server (NTRS)

    Dixon, S. C.

    1985-01-01

    Progress made in key technologies such as materials, structures, aerothermodynamics, hypersonic aerodynamics, and hypersonic airbreathing propulsion are reported. Advances were made in more generic, areas such as active controls, flight computer hardware and software, and interdisciplinary analytical design methodology. These technology advances coupled with the development of and experiences with the Space Shuttle make feasible aerospace plane-type vehicles that meet the more demanding requirements of various DOD missions and/or an all-weather Shuttle II with reduced launch costs. Technology needs and high payoff technologies, and the technology advancements in propulsion, control-configured-vehicles, aerodynamics, aerothermodynamics, aerothermal loads, and materials and structures were studied. The highest payoff technologies of materials and structures including thermal-structural analysis and high temperature test techniques are emphasized. The high priority technology of propulsion, and plans, of what remains to be done rather than firm program commitments, are briefly discussed.

  10. Advancing STEM Education: A 2020 Vision

    ERIC Educational Resources Information Center

    Bybee, Rodger W.

    2010-01-01

    STEM (an acronym for science, technology, engineering and mathematics) had its origins in the 1990s at the National Science Foundation (NSF) and has been used as a generic label for any event, policy, program, or practice that involves one or several of the STEM disciplines. However, a recent survey on the "perception of STEM" found that most…

  11. Potential applications of electron emission membranes in medicine

    NASA Astrophysics Data System (ADS)

    Bilevych, Yevgen; Brunner, Stefan E.; Chan, Hong Wah; Charbon, Edoardo; van der Graaf, Harry; Hagen, Cornelis W.; Nützel, Gert; Pinto, Serge D.; Prodanović, Violeta; Rotman, Daan; Santagata, Fabio; Sarro, Lina; Schaart, Dennis R.; Sinsheimer, John; Smedley, John; Tao, Shuxia; Theulings, Anne M. M. G.

    2016-02-01

    With a miniaturised stack of transmission dynodes, a noise free amplifier is being developed for the detection of single free electrons, with excellent time- and 2D spatial resolution and efficiency. With this generic technology, a new family of detectors for individual elementary particles may become possible. Potential applications of such electron emission membranes in medicine are discussed.

  12. Design of a Model for a Professional Development Programme for a Multidisciplinary Science Subject in the Netherlands

    ERIC Educational Resources Information Center

    Visser, Talitha C.; Coenders, Fer G. M.; Terlouw, Cees; Pieters, Jules M.

    2012-01-01

    Schools are increasingly integrating multidisciplinary education into their programmes. The Minister of Education, Culture and Science has introduced a new, integrated science subject in secondary education in the Netherlands, called Nature, Life and Technology (NLT). This research note describes the design of a generic model for a professional…

  13. The Intelligent Monitoring System: Generic Database Interface (GDI). User Manual. Revision

    DTIC Science & Technology

    1994-01-03

    Summary of Lo=catos Nan* Decufptin Directory Location User Manual FrameMaker ’ source organized inlo, a book UBSW~ftbendb~doclim/user-manual named gdibk A...functions. LNSRCf1bgenrdb/srC I. Framemaker is a docment publishing tool fium Fame Technology Cororation Baseline: 21.1 3-1 anoAW ftnua ?bewd uw on 3.2

  14. The Department of Defense Very High Speed Integrated Circuit (VHSIC) Technology Availability Program Plan for the Committees on Armed Services United States Congress.

    DTIC Science & Technology

    1986-06-30

    features of computer aided design systems and statistical quality control procedures that are generic to chip sets and processes. RADIATION HARDNESS -The...System PSP Programmable Signal Processor SSI Small Scale Integration ." TOW Tube Launched, Optically Tracked, Wire Guided TTL Transistor Transitor Logic

  15. Synergy and Students' Explanations: Exploring the Role of Generic and Content-Specific Scaffolds

    ERIC Educational Resources Information Center

    Delen, Ibrahim; Krajcik, Joseph

    2018-01-01

    In this study, we explored how a teacher used a new mobile application that enables students to collect data inside and outside the classroom, and then use the data to create scientific explanations by using claim-evidence-reasoning framework. Previous technologies designed to support scientific explanations focused on how these programs improve…

  16. Warhead Confirmation: A Follow-on to New START

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MacArthur, Duncan W.

    This presentation's slides are comprised of the following: Warhead Confirmation: A Follow-on to New START; What May Change?; Generic Arms Reduction Treaty; Challenges; Dismantlement and Warhead Confirmation; Confirmation Approaches; Certification; Information Barriers (IBs); The Fissile Material Transparency Technology Demonstration (FMTTD); More Recent Implementations; The Monitor’s View; Authentication; Authentication Options; Authentication in Phases; and Future Treaties.

  17. "Metropolis," The Lights Fantastic: Semiotic Analysis of Lighting Codes in Relation to Character and Theme.

    ERIC Educational Resources Information Center

    Roth, Lane

    Fritz Lang's "Metropolis" (1927) is a seminal film because of its concern, now generic, with the profound impact technological progress has on mankind's social and spiritual progress. As in many later science fiction films, the ascendancy of artifact over nature is depicted not as liberating human beings, but as subjecting and corrupting…

  18. Digital teleprotection units; A technology overview

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Fischer, D.; Madge, R.

    1992-10-01

    Over the past several years, there have been major technological advances in the area of fibre optics links and digital communication systems. This opens the possibility for digital teleprotection systems which are both faster and more reliable than current analogue ones. This paper presents a description of a generic Digital Teleprotection Unit (DTU) followed by a discussion on the technical characteristics of current commercial systems. A comparison is made between DTUs and their analogue counterparts in the area of transfer trip delay. Finally, a direct transfer trip system utilizing redundant DTUs is proposed.

  19. Surface transport vehicles and supporting technology requirements

    NASA Technical Reports Server (NTRS)

    Matijevic, J. R.; Dias, W. C.; Levin, R. R.; Lindemann, R. A.; Smith, J. H.; Venkataraman, S. T.

    1992-01-01

    Requirements have been identified for surface transport vehicles which allow remote scientific exploration on the moon, as well as lunar resource recovery and emplacement of a permanent base on the lunar surface. Attention is given to the results of a design study which developed configurational concepts for lunar surface transport vehicles and inferred technology-development requirements, with a view to a phased program of implementation. Distinct benefits are noted for the design of simple vehicle platforms with high commonality, in order to reduce logistical-support requirements and maximize functional flexibility. Two generic vehicle classed are defined.

  20. ALS turbomachinery technology

    NASA Technical Reports Server (NTRS)

    Csomor, A.; Faulkner, C.; Ferlita, F.

    1990-01-01

    Advanced Development Programs are being pursued by Rocketdyne, Aerojet, and Pratt and Whitney to define and validate design approaches toward producing low-cost, reliable liquid-hydrogen and liquid-oxygen turbopumps for a 2580 kN (580 klb) thrust Advanced Launch System. The generic approach, which is evolving after 18 months of trade studies and conceptual and preliminary design efforts, is explained. In addition, the preliminary liquid-hydrogen turbopump designs produced in parallel tasks by Rocketdyne and Aerojet and the liquid-oxygen turbopump design produced by Pratt and Whitney are described, and technology features and issues are discussed.

  1. Overcoming barriers to membrane protein structure determination.

    PubMed

    Bill, Roslyn M; Henderson, Peter J F; Iwata, So; Kunji, Edmund R S; Michel, Hartmut; Neutze, Richard; Newstead, Simon; Poolman, Bert; Tate, Christopher G; Vogel, Horst

    2011-04-01

    After decades of slow progress, the pace of research on membrane protein structures is beginning to quicken thanks to various improvements in technology, including protein engineering and microfocus X-ray diffraction. Here we review these developments and, where possible, highlight generic new approaches to solving membrane protein structures based on recent technological advances. Rational approaches to overcoming the bottlenecks in the field are urgently required as membrane proteins, which typically comprise ~30% of the proteomes of organisms, are dramatically under-represented in the structural database of the Protein Data Bank.

  2. Automated subsystems control development. [for life support systems of space station

    NASA Technical Reports Server (NTRS)

    Block, R. F.; Heppner, D. B.; Samonski, F. H., Jr.; Lance, N., Jr.

    1985-01-01

    NASA has the objective to launch a Space Station in the 1990s. It has been found that the success of the Space Station engineering development, the achievement of initial operational capability (IOC), and the operation of a productive Space Station will depend heavily on the implementation of an effective automation and control approach. For the development of technology needed to implement the required automation and control function, a contract entitled 'Automated Subsystems Control for Life Support Systems' (ASCLSS) was awarded to two American companies. The present paper provides a description of the ASCLSS program. Attention is given to an automation and control architecture study, a generic automation and control approach for hardware demonstration, a standard software approach, application of Air Revitalization Group (ARG) process simulators, and a generic man-machine interface.

  3. A Generic Software Architecture For Prognostics

    NASA Technical Reports Server (NTRS)

    Teubert, Christopher; Daigle, Matthew J.; Sankararaman, Shankar; Goebel, Kai; Watkins, Jason

    2017-01-01

    Prognostics is a systems engineering discipline focused on predicting end-of-life of components and systems. As a relatively new and emerging technology, there are few fielded implementations of prognostics, due in part to practitioners perceiving a large hurdle in developing the models, algorithms, architecture, and integration pieces. As a result, no open software frameworks for applying prognostics currently exist. This paper introduces the Generic Software Architecture for Prognostics (GSAP), an open-source, cross-platform, object-oriented software framework and support library for creating prognostics applications. GSAP was designed to make prognostics more accessible and enable faster adoption and implementation by industry, by reducing the effort and investment required to develop, test, and deploy prognostics. This paper describes the requirements, design, and testing of GSAP. Additionally, a detailed case study involving battery prognostics demonstrates its use.

  4. Switched-capacitor realization of presynaptic short-term-plasticity and stop-learning synapses in 28 nm CMOS

    PubMed Central

    Noack, Marko; Partzsch, Johannes; Mayr, Christian G.; Hänzsche, Stefan; Scholze, Stefan; Höppner, Sebastian; Ellguth, Georg; Schüffny, Rene

    2015-01-01

    Synaptic dynamics, such as long- and short-term plasticity, play an important role in the complexity and biological realism achievable when running neural networks on a neuromorphic IC. For example, they endow the IC with an ability to adapt and learn from its environment. In order to achieve the millisecond to second time constants required for these synaptic dynamics, analog subthreshold circuits are usually employed. However, due to process variation and leakage problems, it is almost impossible to port these types of circuits to modern sub-100nm technologies. In contrast, we present a neuromorphic system in a 28 nm CMOS process that employs switched capacitor (SC) circuits to implement 128 short term plasticity presynapses as well as 8192 stop-learning synapses. The neuromorphic system consumes an area of 0.36 mm2 and runs at a power consumption of 1.9 mW. The circuit makes use of a technique for minimizing leakage effects allowing for real-time operation with time constants up to several seconds. Since we rely on SC techniques for all calculations, the system is composed of only generic mixed-signal building blocks. These generic building blocks make the system easy to port between technologies and the large digital circuit part inherent in an SC system benefits fully from technology scaling. PMID:25698914

  5. Recent advancements in medical simulation: patient-specific virtual reality simulation.

    PubMed

    Willaert, Willem I M; Aggarwal, Rajesh; Van Herzeele, Isabelle; Cheshire, Nicholas J; Vermassen, Frank E

    2012-07-01

    Patient-specific virtual reality simulation (PSVR) is a new technological advancement that allows practice of upcoming real operations and complements the established role of VR simulation as a generic training tool. This review describes current developments in PSVR and draws parallels with other high-stake industries, such as aviation, military, and sports. A review of the literature was performed using PubMed and Internet search engines to retrieve data relevant to PSVR in medicine. All reports pertaining to PSVR were included. Reports on simulators that did not incorporate a haptic interface device were excluded from the review. Fifteen reports described 12 simulators that enabled PSVR. Medical procedures in the field of laparoscopy, vascular surgery, orthopedics, neurosurgery, and plastic surgery were included. In all cases, source data was two-dimensional CT or MRI data. Face validity was most commonly reported. Only one (vascular) simulator had undergone face, content, and construct validity. Of the 12 simulators, 1 is commercialized and 11 are prototypes. Five simulators have been used in conjunction with real patient procedures. PSVR is a promising technological advance within medicine. The majority of simulators are still in the prototype phase. As further developments unfold, the validity of PSVR will have to be examined much like generic VR simulation for training purposes. Nonetheless, similar to the aviation, military, and sport industries, operative performance and patient safety may be enhanced by the application of this novel technology.

  6. Comparison of response rates and cost-effectiveness for a community-based survey: postal, internet and telephone modes with generic or personalised recruitment approaches

    PubMed Central

    2012-01-01

    Background Epidemiological research often requires collection of data from a representative sample of the community or recruitment of specific groups through broad community approaches. The population coverage of traditional survey methods such as mail-outs to residential addresses, and telephone contact via public directories or random-digit-dialing is declining and survey response rates are falling. There is a need to explore new sampling frames and consider multiple response modes including those offered by changes in telecommunications and internet technology. Methods We evaluated response rates and cost-effectiveness for three modes of survey administration (postal invitation/postal survey, postal invitation/internet survey and postal invitation/telephone survey) and two styles of contact approach (personalised and generic) in a community survey of greywater use. Potential respondents were contacted only once, with no follow up of non-responders. Results The telephone survey produced the highest adjusted response rate (30.2%), followed by the personalised postal survey (10.5%), generic postal survey (7.5%) and then the internet survey (4.7% for the personalised approach and 2.2% for the generic approach). There were some differences in household characteristics and greywater use rates between respondents to different survey modes, and between respondents to personalised and generic approaches. These may be attributable to the differing levels of motivations needed for a response, and varying levels of interest in the survey topic among greywater users and non-users. The generic postal survey had the lowest costs per valid survey received (Australian $22.93), followed by the personalised postal survey ($24.75). Conclusions Our findings suggest that postal surveys currently remain the most economic option for population-based studies, with similar costs for personalised and generic approaches. Internet surveys may be effective for specialised groups where email lists are available for initial contact, but barriers other than household internet access still exist for community-based surveys. Given the increasing recruitment challenges facing community-based studies, there is an imperative to gather contemporary comparative data on different survey modes and recruitment approaches in order to determine their strengths, limitations and costs. Researchers also need to document and report on the potential biases in the target and respondent populations and how this may affect the data collected. PMID:22938205

  7. Enabler for Interdisciplinary eHealthcare: A Qualitative Study.

    PubMed

    Yu, Dan; Poon, Simon K; Tran, Vivienne; Lam, Mary K; Hines, Monique; Brunner, Melissa; Power, Emma; Shaw, Tim; Togher, Leanne

    2017-01-01

    The complex relations between Health Technologies and clinical practices have been the focus of intensive research in recent years. This research represents a shift towards a holistic view where evaluation of health technologies is linked to organisational practices. In this paper, we address the gaps in existing literature regarding the holistic evaluation of e-health in clinical practice. We report the results from a qualitative study conducted to gain insight into e-health in practice within an interdisciplinary healthcare domain. Findings from this qualitative study, provides the foundation for the creation of a generic measurement model that allows for the comparative analysis of health technologies and assist in the decision-making of its stakeholders.

  8. Portable Diagnostics Technology Assessment for Space Missions. Part 2; Market Survey

    NASA Technical Reports Server (NTRS)

    Nelson, Emily S.; Chait, Arnon

    2010-01-01

    A mission to Mars of several years duration requires more demanding standards for all onboard instruments than a 6-month mission to the Moon or the International Space Station. In Part 1, we evaluated generic technologies and suitability to NASA needs. This prior work considered crew safety, device maturity and flightworthiness, resource consumption, and medical value. In Part 2, we continue the study by assessing the current marketplace for reliable Point-of-Care diagnostics. The ultimate goal of this project is to provide a set of objective analytical tools to suggest efficient strategies for reaching specific medical targets for any given space mission as program needs, technological development, and scientific understanding evolve.

  9. Generic element processor (application to nonlinear analysis)

    NASA Technical Reports Server (NTRS)

    Stanley, Gary

    1989-01-01

    The focus here is on one aspect of the Computational Structural Mechanics (CSM) Testbed: finite element technology. The approach involves a Generic Element Processor: a command-driven, database-oriented software shell that facilitates introduction of new elements into the testbed. This shell features an element-independent corotational capability that upgrades linear elements to geometrically nonlinear analysis, and corrects the rigid-body errors that plague many contemporary plate and shell elements. Specific elements that have been implemented in the Testbed via this mechanism include the Assumed Natural-Coordinate Strain (ANS) shell elements, developed with Professor K. C. Park (University of Colorado, Boulder), a new class of curved hybrid shell elements, developed by Dr. David Kang of LPARL (formerly a student of Professor T. Pian), other shell and solid hybrid elements developed by NASA personnel, and recently a repackaged version of the workhorse shell element used in the traditional STAGS nonlinear shell analysis code. The presentation covers: (1) user and developer interfaces to the generic element processor, (2) an explanation of the built-in corotational option, (3) a description of some of the shell-elements currently implemented, and (4) application to sample nonlinear shell postbuckling problems.

  10. Comparison of Outcomes Following a Switch From a Brand to an Authorized Versus Independent Generic Drug.

    PubMed

    Hansen, R A; Qian, J; Berg, R L; Linneman, J G; Seoane-Vazquez, E; Dutcher, S; Raofi, S; Page, C D; Peissig, P L

    2018-02-01

    Authorized generics are identical in formulation to brand drugs, manufactured by the brand company but marketed as a generic. Generics, marketed by generic manufacturers, are required to demonstrate pharmaceutical and bioequivalence to the brand drug, but repetition of clinical trials is not required. This retrospective cohort study compared outcomes for generics and authorized generics, which serves as a generic vs. brand proxy that minimizes bias against generics. For the seven drugs studied between 1999 and 2014, 5,234 unique patients were on brand drugs prior to generic entry and 4,900 (93.6%) switched to a generic. During the 12 months following the brand-to-generic switch, patients using generics vs. authorized generics were similar in terms of outpatient visits, urgent care visits, hospitalizations, and medication discontinuation. The likelihood of emergency department (ED) visits was slightly higher for authorized generics compared with generics. These data suggest that generics were clinically no worse than their proxy brand comparators. © 2017 American Society for Clinical Pharmacology and Therapeutics.

  11. Technology-Enhanced Interactive Teaching of Marginal, Joint and Conditional Probabilities: The Special Case of Bivariate Normal Distribution

    ERIC Educational Resources Information Center

    Dinov, Ivo D.; Kamino, Scott; Bhakhrani, Bilal; Christou, Nicolas

    2013-01-01

    Data analysis requires subtle probability reasoning to answer questions like "What is the chance of event A occurring, given that event B was observed?" This generic question arises in discussions of many intriguing scientific questions such as "What is the probability that an adolescent weighs between 120 and 140 pounds given that…

  12. Development of deployable structures for large space platform systems, volume 1

    NASA Technical Reports Server (NTRS)

    1982-01-01

    Generic deployable spacecraft configurations and deployable platform systems concepts were identified. Sizing, building block concepts, orbiter packaging, thermal analysis, cost analysis, and mass properties analysis as related to platform systems integration are considered. Technology needs are examined and the major criteria used in concept selection are delineated. Requirements for deployable habitat modules, tunnels, and OTV hangars are considered.

  13. Long-term archiving and data access: modelling and standardization

    NASA Technical Reports Server (NTRS)

    Hoc, Claude; Levoir, Thierry; Nonon-Latapie, Michel

    1996-01-01

    This paper reports on the multiple difficulties inherent in the long-term archiving of digital data, and in particular on the different possible causes of definitive data loss. It defines the basic principles which must be respected when creating long-term archives. Such principles concern both the archival systems and the data. The archival systems should have two primary qualities: independence of architecture with respect to technological evolution, and generic-ness, i.e., the capability of ensuring identical service for heterogeneous data. These characteristics are implicit in the Reference Model for Archival Services, currently being designed within an ISO-CCSDS framework. A system prototype has been developed at the French Space Agency (CNES) in conformance with these principles, and its main characteristics will be discussed in this paper. Moreover, the data archived should be capable of abstract representation regardless of the technology used, and should, to the extent that it is possible, be organized, structured and described with the help of existing standards. The immediate advantage of standardization is illustrated by several concrete examples. Both the positive facets and the limitations of this approach are analyzed. The advantages of developing an object-oriented data model within this contxt are then examined.

  14. Scientific Data Management (SDM) Center for Enabling Technologies. 2007-2012

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ludascher, Bertram; Altintas, Ilkay

    Over the past five years, our activities have both established Kepler as a viable scientific workflow environment and demonstrated its value across multiple science applications. We have published numerous peer-reviewed papers on the technologies highlighted in this short paper and have given Kepler tutorials at SC06,SC07,SC08,and SciDAC 2007. Our outreach activities have allowed scientists to learn best practices and better utilize Kepler to address their individual workflow problems. Our contributions to advancing the state-of-the-art in scientific workflows have focused on the following areas. Progress in each of these areas is described in subsequent sections. Workflow development. The development of amore » deeper understanding of scientific workflows "in the wild" and of the requirements for support tools that allow easy construction of complex scientific workflows; Generic workflow components and templates. The development of generic actors (i.e.workflow components and processes) which can be broadly applied to scientific problems; Provenance collection and analysis. The design of a flexible provenance collection and analysis infrastructure within the workflow environment; and, Workflow reliability and fault tolerance. The improvement of the reliability and fault-tolerance of workflow environments.« less

  15. Role of fuel carbon intensity in achieving 2050 greenhouse gas reduction goals within the light-duty vehicle sector.

    PubMed

    Melaina, M; Webster, K

    2011-05-01

    Recent U.S. climate change policy developments include aggressive proposals to reduce greenhouse gas emissions, including cap-and-trade legislation with a goal of an 83% reduction below 2005 levels by 2050. This study examines behavioral and technological changes required to achieve this reduction within the light-duty vehicle (LDV) sector. Under this "fair share" sectoral assumption, aggressive near-term actions are necessary in three areas: vehicle miles traveled (VMT), vehicle fuel economy (FE), and fuel carbon intensity (FCI). Two generic scenarios demonstrate the important role of FCI in meeting the 2050 goal. The first scenario allows deep reductions in FCI to compensate for relatively modest FE improvements and VMT reductions. The second scenario assumes optimistic improvements in FE, relatively large reductions in VMT and less aggressive FCI reductions. Each generic scenario is expanded into three illustrative scenarios to explore the theoretical implications of meeting the 2050 goal by relying exclusively on biofuels and hybrid vehicles, biofuels and plug-in hybrid vehicles, or hydrogen fuel cell electric vehicles. These scenarios inform a discussion of resource limitations, technology development and deployment challenges, and policy goals required to meet the 2050 GHG goal for LDVs.

  16. The evolution of the market for commercial computerized physician order entry and computerized decision support systems for prescribing.

    PubMed

    Mozaffar, Hajar; Williams, Robin; Cresswell, Kathrin; Morrison, Zoe; Bates, David W; Sheikh, Aziz

    2016-03-01

    To understand the evolving market of commercial off-the-shelf Computerized Physician Order Entry (CPOE) and Computerized Decision Support (CDS) applications and its effects on their uptake and implementation in English hospitals. Although CPOE and CDS vendors have been quick to enter the English market, uptake has been slow and uneven. To investigate this, the authors undertook qualitative ethnography of vendors and adopters of hospital CPOE/CDS systems in England. The authors collected data from semi-structured interviews with 11 individuals from 4 vendors, including the 2 most entrenched suppliers, and 6 adopter hospitals, and 21 h of ethnographic observation of 2 user groups, and 1 vendor event. The research and analysis was informed by insights from studies of the evolution of technology fields and the emergence of generic COTS enterprise solutions. Four key themes emerged: (1) adoption of systems that had been developed outside of England, (2) vendors' configuration and customization strategies, (3) localized adopter practices vs generic systems, and (4) unrealistic adopter demands. Evidence for our over-arching finding concerning the current immaturity of the market was derived from vendors' strategies, adopters' reactions to the technology, and policy makers' incomplete insights. The CPOE/CDS market in England is still in an emergent phase. The rapid entrance of diverse products, triggered by federal policy initiatives, has resulted in premature adoption of systems that do not yet adequately meet the needs of hospitals. Vendors and adopters lacked understanding of how to design and implement generic solutions to meet diverse user needs. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  17. Spaceborne sensors (1983-2000 AD): A forecast of technology

    NASA Technical Reports Server (NTRS)

    Kostiuk, T.; Clark, B. P.

    1984-01-01

    A technical review and forecast of space technology as it applies to spaceborne sensors for future NASA missions is presented. A format for categorization of sensor systems covering the entire electromagnetic spectrum, including particles and fields is developed. Major generic sensor systems are related to their subsystems, components, and to basic research and development. General supporting technologies such as cryogenics, optical design, and data processing electronics are addressed where appropriate. The dependence of many classes of instruments on common components, basic R&D and support technologies is also illustrated. A forecast of important system designs and instrument and component performance parameters is provided for the 1983-2000 AD time frame. Some insight into the scientific and applications capabilities and goals of the sensor systems is also given.

  18. Studies of the use of high-temperature nuclear heat from an HTGR for hydrogen production

    NASA Technical Reports Server (NTRS)

    Peterman, D. D.; Fontaine, R. W.; Quade, R. N.; Halvers, L. J.; Jahromi, A. M.

    1975-01-01

    The results of a study which surveyed various methods of hydrogen production using nuclear and fossil energy are presented. A description of these methods is provided, and efficiencies are calculated for each case. The process designs of systems that utilize the heat from a general atomic high temperature gas cooled reactor with a steam methane reformer and feed the reformer with substitute natural gas manufactured from coal, using reforming temperatures, are presented. The capital costs for these systems and the resultant hydrogen production price for these cases are discussed along with a research and development program.

  19. Impaired health-related quality of life in children and adolescents with chronic conditions: a comparative analysis of 10 disease clusters and 33 disease categories/severities utilizing the PedsQL 4.0 Generic Core Scales.

    PubMed

    Varni, James W; Limbers, Christine A; Burwinkle, Tasha M

    2007-07-16

    Advances in biomedical science and technology have resulted in dramatic improvements in the healthcare of pediatric chronic conditions. With enhanced survival, health-related quality of life (HRQOL) issues have become more salient. The objectives of this study were to compare generic HRQOL across ten chronic disease clusters and 33 disease categories/severities from the perspectives of patients and parents. Comparisons were also benchmarked with healthy children data. The analyses were based on over 2,500 pediatric patients from 10 physician-diagnosed disease clusters and 33 disease categories/severities and over 9,500 healthy children utilizing the PedsQL 4.0 Generic Core Scales. Patients were recruited from general pediatric clinics, subspecialty clinics, and hospitals. Pediatric patients with diabetes, gastrointestinal conditions, cardiac conditions, asthma, obesity, end stage renal disease, psychiatric disorders, cancer, rheumatologic conditions, and cerebral palsy self-reported progressively more impaired overall HRQOL than healthy children, respectively, with medium to large effect sizes. Patients with cerebral palsy self-reported the most impaired HRQOL, while patients with diabetes self-reported the best HRQOL. Parent proxy-reports generally paralleled patient self-report, with several notable differences. The results demonstrate differential effects of pediatric chronic conditions on patient HRQOL across diseases clusters, categories, and severities utilizing the PedsQL 4.0 Generic Core Scales from the perspectives of pediatric patients and parents. The data contained within this study represents a larger and more diverse population of pediatric patients with chronic conditions than previously reported in the extant literature. The findings contribute important information on the differential effects of pediatric chronic conditions on generic HRQOL from the perspectives of children and parents utilizing the PedsQL 4.0 Generic Core Scales. These findings with the PedsQL have clinical implications for the healthcare services provided for children with chronic health conditions. Given the degree of reported impairment based on PedsQL scores across different pediatric chronic conditions, the need for more efficacious targeted treatments for those pediatric patients with more severely impaired HRQOL is clearly and urgently indicated.

  20. Impaired health-related quality of life in children and adolescents with chronic conditions: a comparative analysis of 10 disease clusters and 33 disease categories/severities utilizing the PedsQL™ 4.0 Generic Core Scales

    PubMed Central

    Varni, James W; Limbers, Christine A; Burwinkle, Tasha M

    2007-01-01

    Background Advances in biomedical science and technology have resulted in dramatic improvements in the healthcare of pediatric chronic conditions. With enhanced survival, health-related quality of life (HRQOL) issues have become more salient. The objectives of this study were to compare generic HRQOL across ten chronic disease clusters and 33 disease categories/severities from the perspectives of patients and parents. Comparisons were also benchmarked with healthy children data. Methods The analyses were based on over 2,500 pediatric patients from 10 physician-diagnosed disease clusters and 33 disease categories/severities and over 9,500 healthy children utilizing the PedsQL™ 4.0 Generic Core Scales. Patients were recruited from general pediatric clinics, subspecialty clinics, and hospitals. Results Pediatric patients with diabetes, gastrointestinal conditions, cardiac conditions, asthma, obesity, end stage renal disease, psychiatric disorders, cancer, rheumatologic conditions, and cerebral palsy self-reported progressively more impaired overall HRQOL than healthy children, respectively, with medium to large effect sizes. Patients with cerebral palsy self-reported the most impaired HRQOL, while patients with diabetes self-reported the best HRQOL. Parent proxy-reports generally paralleled patient self-report, with several notable differences. Conclusion The results demonstrate differential effects of pediatric chronic conditions on patient HRQOL across diseases clusters, categories, and severities utilizing the PedsQL™ 4.0 Generic Core Scales from the perspectives of pediatric patients and parents. The data contained within this study represents a larger and more diverse population of pediatric patients with chronic conditions than previously reported in the extant literature. The findings contribute important information on the differential effects of pediatric chronic conditions on generic HRQOL from the perspectives of children and parents utilizing the PedsQL™ 4.0 Generic Core Scales. These findings with the PedsQL™ have clinical implications for the healthcare services provided for children with chronic health conditions. Given the degree of reported impairment based on PedsQL™ scores across different pediatric chronic conditions, the need for more efficacious targeted treatments for those pediatric patients with more severely impaired HRQOL is clearly and urgently indicated. PMID:17634123

  1. Commercial Generic Bioprocessing Apparatus

    NASA Technical Reports Server (NTRS)

    1998-01-01

    CGBA, a facility developed by BioServe Space Technologies, a NASA Commercial Generic Bioprocessing Space Center, allows a variety of sophisticated bioprocessing research to be performed using a common device. The Fluids Processing Apparatus is essentially a microgravity test tube that allows a variety of complex investigations to be performed in space. This is a glass barrel containing several chambers separated by rubber stoppers. Eight FPAs are placed together in a Group Activation Pack (GAP), which allows all of the research to be started simultaneously by turning a single crank. Eight GAPs, or similar-sized payloads, can be stored in a single CGBA temperature controlled locker, which now uses motor drives to automatically turn the cranks to start and stop experiments. On STS-95, research efforts cover eight major areas that will benefit Earth-based products ranging from the production of pharmaceuticals to fish hatcheries.

  2. Combining the Generic Entity-Attribute-Value Model and Terminological Models into a Common Ontology to Enable Data Integration and Decision Support.

    PubMed

    Bouaud, Jacques; Guézennec, Gilles; Séroussi, Brigitte

    2018-01-01

    The integration of clinical information models and termino-ontological models into a unique ontological framework is highly desirable for it facilitates data integration and management using the same formal mechanisms for both data concepts and information model components. This is particularly true for knowledge-based decision support tools that aim to take advantage of all facets of semantic web technologies in merging ontological reasoning, concept classification, and rule-based inferences. We present an ontology template that combines generic data model components with (parts of) existing termino-ontological resources. The approach is developed for the guideline-based decision support module on breast cancer management within the DESIREE European project. The approach is based on the entity attribute value model and could be extended to other domains.

  3. Unsteady Aerodynamic Modeling in Roll for the NASA Generic Transport Model

    NASA Technical Reports Server (NTRS)

    Murphy, Patrick C.; Klein, Vladislav; Frink, Neal T.

    2012-01-01

    Reducing the impact of loss-of-control conditions on commercial transport aircraft is a primary goal of the NASA Aviation Safety Program. One aspect in developing the supporting technologies is to improve the aerodynamic models that represent these adverse conditions. Aerodynamic models appropriate for loss of control conditions require a more general mathematical representation to predict nonlinear unsteady behaviors. In this paper, a more general mathematical model is proposed for the subscale NASA Generic Transport Model (GTM) that covers both low and high angles of attack. Particular attention is devoted to the stall region where full-scale transports have demonstrated a tendency for roll instability. The complete aerodynamic model was estimated from dynamic wind-tunnel data. Advanced computational methods are used to improve understanding and visualize the flow physics within the region where roll instability is a factor.

  4. Generic three-dimensional wavelength routers based on cross connects of multilayer diffractive elements

    NASA Astrophysics Data System (ADS)

    Deng, Xuegong; Chen, Ray T.

    2001-05-01

    We report a generic method to construct 3D wavelength routers by adapting a novel design for multi-optical wavelength interconnects (MOWI's). Optical wavelength- selective (WS) interconnections are realized by resorting to layered diffractive phase elements. Besides, we simultaneously carry out several other integrated operations on the incident beams according to their wavelengths. We demonstrate an 4 X 4 inline 3D WS optical crossconnect and a 1D 1 X 8 WS perfect shuffler. The devices are well feasible for mass production by using current standard microelectronics technologies. It is plausible that the proposed WS MOWI scenario will find critical applications in module-to-module and board-to-board optical interconnect systems, as well as in other devices for short-link multi- wavelength networks that would benefit from function integration.

  5. Current Grid operation and future role of the Grid

    NASA Astrophysics Data System (ADS)

    Smirnova, O.

    2012-12-01

    Grid-like technologies and approaches became an integral part of HEP experiments. Some other scientific communities also use similar technologies for data-intensive computations. The distinct feature of Grid computing is the ability to federate heterogeneous resources of different ownership into a seamless infrastructure, accessible via a single log-on. Like other infrastructures of similar nature, Grid functioning requires not only technologically sound basis, but also reliable operation procedures, monitoring and accounting. The two aspects, technological and operational, are closely related: weaker is the technology, more burden is on operations, and other way around. As of today, Grid technologies are still evolving: at CERN alone, every LHC experiment uses an own Grid-like system. This inevitably creates a heavy load on operations. Infrastructure maintenance, monitoring and incident response are done on several levels, from local system administrators to large international organisations, involving massive human effort worldwide. The necessity to commit substantial resources is one of the obstacles faced by smaller research communities when moving computing to the Grid. Moreover, most current Grid solutions were developed under significant influence of HEP use cases, and thus need additional effort to adapt them to other applications. Reluctance of many non-HEP researchers to use Grid negatively affects the outlook for national Grid organisations, which strive to provide multi-science services. We started from the situation where Grid organisations were fused with HEP laboratories and national HEP research programmes; we hope to move towards the world where Grid will ultimately reach the status of generic public computing and storage service provider and permanent national and international Grid infrastructures will be established. How far will we be able to advance along this path, depends on us. If no standardisation and convergence efforts will take place, Grid will become limited to HEP; if however the current multitude of Grid-like systems will converge to a generic, modular and extensible solution, Grid will become true to its name.

  6. Comparison of generic-to-brand switchback patterns for generic and authorized generic drugs

    PubMed Central

    Hansen, Richard A.; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K.; Raofi, Saeid; Page, C. David; Peissig, Peggy

    2018-01-01

    Background While generic drugs are therapeutically equivalent to brand drugs, some patients and healthcare providers remain uncertain about whether they produce identical outcomes. Authorized generics, which are identical in formulation to corresponding brand drugs but marketed as a generic, provide a unique post-marketing opportunity to study whether utilization patterns are influenced by perceptions of generic drugs. Objectives To compare generic-to-brand switchback rates between generics and authorized generics. Methods A retrospective cohort study was conducted using claims and electronic health records data from a regional U.S. healthcare system. Ten drugs with authorized generics and generics marketed between 1999 and 2014 were evaluated. Eligible adult patients received a brand drug during the 6 months preceding generic entry, and then switched to a generic or authorized generic. Patients in this cohort were followed for up to 30 months from the index switch date to evaluate occurrence of generic-to-brand switchbacks. Switchback rates were compared between patients on authorized generics versus generics using Kaplan-Meier curves and Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson comorbidity score, pre-index drug use characteristics, and pre-index healthcare utilization. Results Among 5,542 unique patients that switched from brand-to-generic or brand-to-authorized generic, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for authorized generics compared with generics (HR=0.86; 95% CI 0.65-1.15). The likelihood of switchback was higher for alendronate (HR=1.64; 95% CI 1.20-2.23) and simvastatin (HR=1.81; 95% CI 1.30-2.54) and lower for amlodipine (HR=0.27; 95% CI 0.17-0.42) compared with other drugs in the cohort. Conclusions Overall switchback rates were similar between authorized generic and generic drug users, indirectly supporting similar efficacy and tolerability profiles for brand and generic drugs. Reasons for differences in switchback rates among specific products need to be further explored. PMID:28152215

  7. [Medical education in the digital era; opportunities for the Netherlands].

    PubMed

    Broeders, Ivo A M J

    2015-01-01

    The next generation of physicians enters a job market of high-tech medicine; detailed technical knowledge of this technology is therefore a prerequisite. However, teaching on technology does not currently form an integral part of the medicine degree curriculum. We should consider if a generic medicine degree is still a valid framework, or whether students should be offered to move into different specialties at an earlier stage. By applying the latter approach, we can produce a generation of physicians prepared for the challenges thrown at them in a constantly changing, high-tech, professional environment.

  8. Development of pressure containment and damage tolerance technology for composite fuselage structures in large transport aircraft

    NASA Technical Reports Server (NTRS)

    Smith, P. J.; Thomson, L. W.; Wilson, R. D.

    1986-01-01

    NASA sponsored composites research and development programs were set in place to develop the critical engineering technologies in large transport aircraft structures. This NASA-Boeing program focused on the critical issues of damage tolerance and pressure containment generic to the fuselage structure of large pressurized aircraft. Skin-stringer and honeycomb sandwich composite fuselage shell designs were evaluated to resolve these issues. Analyses were developed to model the structural response of the fuselage shell designs, and a development test program evaluated the selected design configurations to appropriate load conditions.

  9. Shock tunnel studies of scramjet phenomena, supplement 6

    NASA Technical Reports Server (NTRS)

    Wendt, M.; Nettleton, M.; Morgan, R. G.; Skinner, K.; Casey, R.; Stalker, R.; Brescianini, C.; Paull, A.; Allen, G.; Smart, M.

    1993-01-01

    Reports by the staff of the University of Queensland on various research studies related to the advancement of scramjet technology are presented. These reports document the tests conducted in the reflected shock tunnel T4 and supporting research facilities that have been used to study the injection, mixing, and combustion of hydrogen fuel in generic scramjets at flow conditions typical of hypersonic flight. In addition, topics include the development of instrumentation and measurement technology, such as combustor wall shear and stream composition in pulse facilities, and numerical studies and analyses of the scramjet combustor process and the test facility operation.

  10. Department of the Navy Supporting Data for Fiscal Year 1983 Budget Estimates Descriptive Summaries Submitted to Congress February 1982. Research, Development, Test & Evaluation, Navy. Book 1 of 3. Technology Base, Advanced Technology Development, Strategic Programs.

    DTIC Science & Technology

    1982-02-01

    optimization methods have been developed for problems in production and distribution modeling including design and evaluation of storage alternatives under...and winds using high frequency , X-band doppler, pulse -limited, and Delta-K radars. Development of millimeter-wave radiometric imaging systems and...generic system design concept for a system capable of defending the Fleet from the high angle threat 1.4 The first model of the drive system for a

  11. Workflow based framework for life science informatics.

    PubMed

    Tiwari, Abhishek; Sekhar, Arvind K T

    2007-10-01

    Workflow technology is a generic mechanism to integrate diverse types of available resources (databases, servers, software applications and different services) which facilitate knowledge exchange within traditionally divergent fields such as molecular biology, clinical research, computational science, physics, chemistry and statistics. Researchers can easily incorporate and access diverse, distributed tools and data to develop their own research protocols for scientific analysis. Application of workflow technology has been reported in areas like drug discovery, genomics, large-scale gene expression analysis, proteomics, and system biology. In this article, we have discussed the existing workflow systems and the trends in applications of workflow based systems.

  12. Decision tools in health care: focus on the problem, not the solution.

    PubMed

    Liu, Joseph; Wyatt, Jeremy C; Altman, Douglas G

    2006-01-20

    Systematic reviews or randomised-controlled trials usually help to establish the effectiveness of drugs and other health technologies, but are rarely sufficient by themselves to ensure actual clinical use of the technology. The process from innovation to routine clinical use is complex. Numerous computerised decision support systems (DSS) have been developed, but many fail to be taken up into actual use. Some developers construct technologically advanced systems with little relevance to the real world. Others did not determine whether a clinical need exists. With NHS investing 5 billion pounds sterling in computer systems, also occurring in other countries, there is an urgent need to shift from a technology-driven approach to one that identifies and employs the most cost-effective method to manage knowledge, regardless of the technology. The generic term, 'decision tool' (DT), is therefore suggested to demonstrate that these aids, which seem different technically, are conceptually the same from a clinical viewpoint. Many computerised DSSs failed for various reasons, for example, they were not based on best available knowledge; there was insufficient emphasis on their need for high quality clinical data; their development was technology-led; or evaluation methods were misapplied. We argue that DSSs and other computer-based, paper-based and even mechanical decision aids are members of a wider family of decision tools. A DT is an active knowledge resource that uses patient data to generate case specific advice, which supports decision making about individual patients by health professionals, the patients themselves or others concerned about them. The identification of DTs as a consistent and important category of health technology should encourage the sharing of lessons between DT developers and users and reduce the frequency of decision tool projects focusing only on technology. The focus of evaluation should become more clinical, with the impact of computer-based DTs being evaluated against other computer, paper- or mechanical tools, to identify the most cost effective tool for each clinical problem. We suggested the generic term 'decision tool' to demonstrate that decision-making aids, such as computerised DSSs, paper algorithms, and reminders are conceptually the same, so the methods to evaluate them should be the same.

  13. Structures, performance, benefit, cost study. [gas turbine engines

    NASA Technical Reports Server (NTRS)

    Feder, E.

    1981-01-01

    Aircraft engine structures were studied to identify the advanced structural technologies that would provide the most benefits to future aircraft operations. A series of studies identified engine systems with the greatest potential for improvements. Based on these studies, six advanced generic structural concepts were selected and conceptually designed. The benefits of each concept were quantitatively assessed in terms of thrust specific fuel consumption, weight, cost, maintenance cost, fuel burned and direct operating cost plus interest. The probability of success of each concept was also determined. The concepts were ranked and the three most promising were selected for further study which consisted of identifying and comprehensively outlining the advanced technologies required to develop these concepts for aircraft engine application. Analytic, fabrication, and test technology developments are required. The technology programs outlined emphasize the need to provide basic, fundamental understanding of technology to obtain the benefit goals.

  14. Unmanned Ground Vehicle

    DTIC Science & Technology

    2001-11-01

    Systems ( JAUGS ). JAUGS is a JRP technology initiative under the cognizance of the Aviation and Missile Command Research, Development and Engineering Center...AMRDEC). The JAUGS focus is on developing a high-level command and control architecture for UGVs. As defined in the JRP Glossary, “ JAUGS is an upper...vehicle platforms and missions. JAUGS uses the Society of Automotive Engineers Generic Open Architecture framework to classify UGV interfaces and

  15. Biosimilars and the long game.

    PubMed

    Huzair, Farah; Kale, Dinar

    2015-05-01

    Despite greater certainty for biosimilar markets and regulation, the change that was seen in the small-molecule pharmaceuticals market with the rapid entrance of emerging-country generics suppliers will not be replicated exactly. The long game has yet to be played out, and recent changes in regulation, science, and production technology are likely to impact on future patterns of partnership and production. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Adaptive Sampling in Autonomous Marine Sensor Networks

    DTIC Science & Technology

    2006-06-01

    Analog Processing Section A high-performance preamplifier with low noise characteristics is vital to obtaining quality sonar data. The preamplifier ...research assistantships through the Generic Ocean Array Technology Sonar (GOATS) project, contract N00014-97-1-0202 and contract N00014-05-G-0106 Delivery...Formation Behavior ..................................... 60 5 An AUV Intelligent Sensor for Real-Time Adaptive Sensing 63 5.1 A Logical Sonar Sensor

  17. Perspectives on Research in Artificial Intelligence and Artificial General Intelligence Relevant to DoD

    DTIC Science & Technology

    2017-01-01

    3.2 Generic Network Architecture ........................................................................................ 11 3.3 Neuron Non ...The magnitude of the importance of these technologies is hard to overstate, and we thus feel that technically minded, non -expert readers should be...The result is often billions of weights and biases which need to be calculated. 13 3.3 Neuron Non -Linearity The big, early advance in

  18. Hawaii Annual Performance Report for Vocational Education: 1992-1993 for the Vocational Education State-Administered Program under the Carl D. Perkins Vocational and Applied Technology Education Act of 1990.

    ERIC Educational Resources Information Center

    Hawaii State Board for Vocational Education, Honolulu.

    During the 1992-1993 school year, vocational/occupational education in Hawaii took place primarily at 39 secondary schools, 7 community colleges, and the Employment Training Center. Training was provided in the following generic skill areas: agriculture/aquaculture, business, construction, electrical/electronic, technical/graphic, mechanical, and…

  19. Learning in the Age of Global Information Technology: Development of a Generic Architecture for an Advanced Learning Management System

    ERIC Educational Resources Information Center

    Watson, Jason; Ahmed, Pervaiz K.

    2004-01-01

    This paper briefly introduces the trends towards e-learning and amplifies some examples of state of the art systems, pointing out that all of these are, to date, limited by adaptability and shareability of content and that it is necessary for industry to develop and use an inter-operability standard. Uses SCORM specifications to specify the…

  20. Investigation of the Feasibility of Utilizing Gamma Emission Computed Tomography in Evaluating Fission Product Migration in Irradiated TRISO Fuel Experiments

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Jason M. Harp; Paul A. Demkowicz

    2014-10-01

    In the High Temperature Gas-Cooled Reactor (HTGR) the TRISO particle fuel serves as the primary fission product containment. However the large number of TRISO particles present in proposed HTGRs dictates that there will be a small fraction (~10 -4 to 10 -5) of as manufactured and in-pile particle failures that will lead to some fission product release. The matrix material surrounding the TRISO particles in fuel compacts and the structural graphite holding the TRISO particles in place can also serve as sinks for containing any released fission products. However data on the migration of solid fission products through these materialsmore » is lacking. One of the primary goals of the AGR-3/4 experiment is to study fission product migration from failed TRISO particles in prototypic HTGR components such as structural graphite and compact matrix material. In this work, the potential for a Gamma Emission Computed Tomography (GECT) technique to non-destructively examine the fission product distribution in AGR-3/4 components and other irradiation experiments is explored. Specifically, the feasibility of using the Idaho National Laboratory (INL) Hot Fuels Examination Facility (HFEF) Precision Gamma Scanner (PGS) system for this GECT application is considered. To test the feasibility, the response of the PGS system to idealized fission product distributions has been simulated using Monte Carlo radiation transport simulations. Previous work that applied similar techniques during the AGR-1 experiment will also be discussed as well as planned uses for the GECT technique during the post irradiation examination of the AGR-2 experiment. The GECT technique has also been applied to other irradiated nuclear fuel systems that were currently available in the HFEF hot cell including oxide fuel pins, metallic fuel pins, and monolithic plate fuel.« less

  1. Optimised management of orphan wastes in the UK

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Doudou, Slimane; McTeer, Jennifer; Wickham, Stephen

    2013-07-01

    Orphan wastes have properties preventing them from being managed according to existing or currently planned management routes, or lack characterisation so that their management is uncertain. The identification of new management opportunities for orphan wastes could realise significant benefits by reducing the number of processing facilities required, reducing waste volumes, reducing hazard or leading to the development of centres of excellence for the processing of certain types of orphan wastes. Information on the characteristics of orphan waste existing at nuclear licensed sites across the UK has been collated and a database developed to act as a repository for the informationmore » gathered. The database provides a capability to analyse the data and to explore possible treatment technologies for each orphan waste type. Thirty five distinct orphan waste types have been defined and possible treatment options considered. Treatment technologies (including chemical, high temperature, immobilisation and physical technologies) that could be applied to one or more of the generic orphan waste streams have been identified. Wiring diagrams have been used to highlight the waste treatment / lifecycle management options that are available for each of the generic orphan groups as well as identifying areas for further research and development. This work has identified the potential for optimising the management of orphan wastes in a number of areas, and many potential opportunities were identified. Such opportunities could be investigated by waste managers at waste producing nuclear sites, to facilitate the development of new management routes for orphan wastes. (authors)« less

  2. Might generic OCs create contraceptive price war?

    PubMed

    1987-02-01

    Genora 1/35 and 1/50, the 1st generic oral contraceptives (OCs) in the world, are now being marketed in the US. Clinicians interviewed by "Contraceptive Technology Update" (CTU) offer differing opinions as to what this new OC may mean in the marketplace. Products of Rugby Laboratories, the pills are copy products of Ortho Pharmaceutical's ON 1/35 and ON 1/50 formulations. Most clinicians believe that Genora's success or failure in the OC market depends on its eventual retail price. The price difference of $3-$4 may be sufficiently substantial for retailers to charge less for the generic OCs. If that is the case, many doctors may prescribe a pill which will save their patients $4/month. Dr. Mildred Hanson, a Minneapolis gynecologist/obstetrician, feels any cost savings from Genora will have a significant impact on the OC market. She suggests that the less expensive OCs will catch the attention of health maintenance organizations (HMOs) and the business of women who participate in such health plans. Yet James Burns, director of family planning services for the Hartford City Health Department, thinks that even a full-scale retail price war won't have much effect from a clinic standpoint. He reports that clinics are able to obtain contraceptive supplies rather inexpensively through the contracting system. Hanson also expressed doubt over the potential popularity of Genora 1/50 as clinical concerns about the effects of combined OCs on serum lipid levels and carbohydrate metabolism have resulted in a nationwide push toward OCs containing less than 50 micrograms of estrogen. He indicated concern that declines in pharmaceutical house products from pricing competition with generic pills might have a negative impact on contraceptive research and development. Dick Haskitt, director of business planning for Syntex Laboratories, Inc., who will produce the OCs for Rugby, reports that their market research shows that people are very interested in having a generic OC available. Initially, Genora will be marketed only to retail pharmacies, wholesalers, and drug chains.

  3. Generic trending and analysis system

    NASA Technical Reports Server (NTRS)

    Keehan, Lori; Reese, Jay

    1994-01-01

    The Generic Trending and Analysis System (GTAS) is a generic spacecraft performance monitoring tool developed by NASA Code 511 and Loral Aerosys. It is designed to facilitate quick anomaly resolution and trend analysis. Traditionally, the job of off-line analysis has been performed using hardware and software systems developed for real-time spacecraft contacts; then, the systems were supplemented with a collection of tools developed by Flight Operations Team (FOT) members. Since the number of upcoming missions is increasing, NASA can no longer afford to operate in this manner. GTAS improves control center productivity and effectiveness because it provides a generic solution across multiple missions. Thus, GTAS eliminates the need for each individual mission to develop duplicate capabilities. It also allows for more sophisticated tools to be developed because it draws resources from several projects. In addition, the GTAS software system incorporates commercial off-the-shelf tools software (COTS) packages and reuses components of other NASA-developed systems wherever possible. GTAS has incorporated lessons learned from previous missions by involving the users early in the development process. GTAS users took a proactive role in requirements analysis, design, development, and testing. Because of user involvement, several special tools were designed and are now being developed. GTAS users expressed considerable interest in facilitating data collection for long term trending and analysis. As a result, GTAS provides easy access to large volumes of processed telemetry data directly in the control center. The GTAS archival and retrieval capabilities are supported by the integration of optical disk technology and a COTS relational database management system.

  4. Insertion of GaAs MMICs into EW systems

    NASA Astrophysics Data System (ADS)

    Schineller, E. R.; Pospishil, A.; Grzyb, J.

    1989-09-01

    Development activities on a microwave/mm-wave monolithic IC (MIMIC) program are described, as well as the methodology for inserting these GaAs IC chips into several EW systems. The generic EW chip set developed on the MIMIC program consists of 23 broadband chip types, including amplifiers, oscillators, mixers, switches, variable attenuators, power dividers, and power combiners. These chips are being designed for fabrication using the multifunction self-aligned gate process. The benefits from GaAs IC insertion are quantified by a comparison of hardware units fabricated with existing MIC and digital ECL technology and the same units manufactured with monolithic technology. It is found that major improvements in cost, reliability, size, weight, and performance can be realized. Examples illustrating the methodology for technology insertion are presented.

  5. Authorized generic drugs, price competition, and consumers' welfare.

    PubMed

    Berndt, Ernst R; Mortimer, Richard; Bhattacharjya, Ashoke; Parece, Andrew; Tuttle, Edward

    2007-01-01

    The growing frequency of authorized generics has important implications for the welfare of prescription drug consumers. Authorized generic entry could affect the timing of generic entry, brand-name and generic prices, and generic penetration. We reviewed 1999-2003 data and found that generic entry in the absence of short-run exclusivity restrictions benefits consumers through lower short-run prices. We suggest that these benefits likely also result from authorized generics. We posit that long-run prices and shares are likely essentially unaffected by authorized generics and that potential costs to consumers from any delayed generic entry are likely small.

  6. Wireless body sensor networks for health-monitoring applications.

    PubMed

    Hao, Yang; Foster, Robert

    2008-11-01

    Current wireless technologies, such as wireless body area networks and wireless personal area networks, provide promising applications in medical monitoring systems to measure specified physiological data and also provide location-based information, if required. With the increasing sophistication of wearable and implantable medical devices and their integration with wireless sensors, an ever-expanding range of therapeutic and diagnostic applications is being pursued by research and commercial organizations. This paper aims to provide a comprehensive review of recent developments in wireless sensor technology for monitoring behaviour related to human physiological responses. It presents background information on the use of wireless technology and sensors to develop a wireless physiological measurement system. A generic miniature platform and other available technologies for wireless sensors have been studied in terms of hardware and software structural requirements for a low-cost, low-power, non-invasive and unobtrusive system.

  7. DEVELOPMENT OF A NOVEL GAS PRESSURIZED STRIPPING (GPS)-BASED TECHNOLOGY FOR CO 2 CAPTURE FROM POST-COMBUSTION FLUE GASES Topical Report: Techno-Economic Analysis of GPS-based Technology for CO 2 Capture

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chen, Shiaoguo

    This topical report presents the techno-economic analysis, conducted by Carbon Capture Scientific, LLC (CCS) and Nexant, for a nominal 550 MWe supercritical pulverized coal (PC) power plant utilizing CCS patented Gas Pressurized Stripping (GPS) technology for post-combustion carbon capture (PCC). Illinois No. 6 coal is used as fuel. Because of the difference in performance between the GPS-based PCC and the MEA-based CO2 absorption technology, the net power output of this plant is not exactly 550 MWe. DOE/NETL Case 11 supercritical PC plant without CO2 capture and Case 12 supercritical PC plant with benchmark MEA-based CO2 capture are chosen as references.more » In order to include CO2 compression process for the baseline case, CCS independently evaluated the generic 30 wt% MEA-based PCC process together with the CO2 compression section. The net power produced in the supercritical PC plant with GPS-based PCC is 647 MW, greater than the MEA-based design. The levelized cost of electricity (LCOE) over a 20-year period is adopted to assess techno-economic performance. The LCOE for the supercritical PC plant with GPS-based PCC, not considering CO2 transport, storage and monitoring (TS&M), is 97.4 mills/kWh, or 152% of the Case 11 supercritical PC plant without CO2 capture, equivalent to $39.6/tonne for the cost of CO2 capture. GPS-based PCC is also significantly superior to the generic MEA-based PCC with CO2 compression section, whose LCOE is as high as 109.6 mills/kWh.« less

  8. The experiences of implementing generic medicine policy in eight countries: A review and recommendations for a successful promotion of generic medicine use

    PubMed Central

    Hassali, Mohamed Azmi; Alrasheedy, Alian A.; McLachlan, Andrew; Nguyen, Tuan Anh; AL-Tamimi, Saleh Karamah; Ibrahim, Mohamed Izham Mohamed; Aljadhey, Hisham

    2013-01-01

    Generic medicines are clinically interchangeable with original brand medicines and have the same quality, efficacy and safety profiles. They are, nevertheless, much cheaper in price. Thus, while providing the same therapeutic outcomes, generic medicines lead to substantial savings for healthcare systems. Therefore, the quality use of generic medicines is promoted in many countries. In this paper, we reviewed the role of generic medicines in healthcare systems and the experiences of promoting the use of generic medicines in eight selected countries, namely the United States (US), the United Kingdom (UK), Sweden, Finland, Australia, Japan, Malaysia and Thailand. The review showed that there are different main policies adopted to promote generic medicines such as generic substitution in the US, generic prescribing in the UK and mandatory generic substitution in Sweden and Finland. To effectively and successfully implement the main policy, different complementary policies and initiatives were necessarily introduced. Barriers to generic medicine use varied between countries from negative perceptions about generic medicines to lack of a coherent generic medicine policy, while facilitators included availability of information about generic medicines to both healthcare professionals and patients, brand interchangeability guidelines, regulations that support generic substitution by pharmacists, and incentives to both healthcare professionals and patients. PMID:25561861

  9. Generic functional requirements for a NASA general-purpose data base management system

    NASA Technical Reports Server (NTRS)

    Lohman, G. M.

    1981-01-01

    Generic functional requirements for a general-purpose, multi-mission data base management system (DBMS) for application to remotely sensed scientific data bases are detailed. The motivation for utilizing DBMS technology in this environment is explained. The major requirements include: (1) a DBMS for scientific observational data; (2) a multi-mission capability; (3) user-friendly; (4) extensive and integrated information about data; (5) robust languages for defining data structures and formats; (6) scientific data types and structures; (7) flexible physical access mechanisms; (8) ways of representing spatial relationships; (9) a high level nonprocedural interactive query and data manipulation language; (10) data base maintenance utilities; (11) high rate input/output and large data volume storage; and adaptability to a distributed data base and/or data base machine configuration. Detailed functions are specified in a top-down hierarchic fashion. Implementation, performance, and support requirements are also given.

  10. A generative tool for building health applications driven by ISO 13606 archetypes.

    PubMed

    Menárguez-Tortosa, Marcos; Martínez-Costa, Catalina; Fernández-Breis, Jesualdo Tomás

    2012-10-01

    The use of Electronic Healthcare Records (EHR) standards in the development of healthcare applications is crucial for achieving the semantic interoperability of clinical information. Advanced EHR standards make use of the dual model architecture, which provides a solution for clinical interoperability based on the separation of the information and knowledge. However, the impact of such standards is biased by the limited availability of tools that facilitate their usage and practical implementation. In this paper, we present an approach for the automatic generation of clinical applications for the ISO 13606 EHR standard, which is based on the dual model architecture. This generator has been generically designed, so it can be easily adapted to other dual model standards and can generate applications for multiple technological platforms. Such good properties are based on the combination of standards for the representation of generic user interfaces and model-driven engineering techniques.

  11. Astrophysical payload accommodation on the space station

    NASA Technical Reports Server (NTRS)

    Woods, B. P.

    1985-01-01

    Surveys of potential space station astrophysics payload requirements and existing point mount design concepts were performed to identify potential design approaches for accommodating astrophysics instruments from space station. Most existing instrument pointing systems were designed for operation from the space shuttle and it is unlikely that they will sustain their performance requirements when exposed to the space station disturbance environment. The technology exists or is becoming available so that precision pointing can be provided from the space station manned core. Development of a disturbance insensitive pointing mount is the key to providing a generic system for space station. It is recommended that the MSFC Suspended Experiment Mount concept be investigated for use as part of a generic pointing mount for space station. Availability of a shirtsleeve module for instrument change out, maintenance and repair is desirable from the user's point of view. Addition of a shirtsleeve module on space station would require a major program commitment.

  12. VIPER: Virtual Intelligent Planetary Exploration Rover

    NASA Technical Reports Server (NTRS)

    Edwards, Laurence; Flueckiger, Lorenzo; Nguyen, Laurent; Washington, Richard

    2001-01-01

    Simulation and visualization of rover behavior are critical capabilities for scientists and rover operators to construct, test, and validate plans for commanding a remote rover. The VIPER system links these capabilities. using a high-fidelity virtual-reality (VR) environment. a kinematically accurate simulator, and a flexible plan executive to allow users to simulate and visualize possible execution outcomes of a plan under development. This work is part of a larger vision of a science-centered rover control environment, where a scientist may inspect and explore the environment via VR tools, specify science goals, and visualize the expected and actual behavior of the remote rover. The VIPER system is constructed from three generic systems, linked together via a minimal amount of customization into the integrated system. The complete system points out the power of combining plan execution, simulation, and visualization for envisioning rover behavior; it also demonstrates the utility of developing generic technologies. which can be combined in novel and useful ways.

  13. Human life support during interplanetary travel and domicile. II - Generic Modular Flow Schematic modeling

    NASA Technical Reports Server (NTRS)

    Farral, Joseph F.; Seshan, P. K.; Rohatgi, Naresh K.

    1991-01-01

    This paper describes the Generic Modular Flow Schematic (GMFS) architecture capable of encompassing all functional elements of a physical/chemical life support system (LSS). The GMFS can be implemented to synthesize, model, analyze, and quantitatively compare many configurations of LSSs, from a simple, completely open-loop to a very complex closed-loop. The GMFS model is coded in ASPEN, a state-of-the-art chemical process simulation program, to accurately compute the material, heat, and power flow quantities for every stream in each of the subsystem functional elements (SFEs) in the chosen configuration of a life support system. The GMFS approach integrates the various SFEs and subsystems in a hierarchical and modular fashion facilitating rapid substitutions and reconfiguration of a life support system. The comprehensive ASPEN material and energy balance output is transferred to a systems and technology assessment spreadsheet for rigorous system analysis and trade studies.

  14. Generic medicines and generic substitution: contrasting perspectives of stakeholders in Ireland.

    PubMed

    O'Leary, A; Usher, C; Lynch, M; Hall, M; Hemeryk, L; Spillane, S; Gallagher, P; Barry, M

    2015-12-15

    The Health (Pricing and Supply of Medical Goods) Act 2013 passed into law in July 2013 and legislated for generic substitution in Ireland. The aim of the study was to ascertain the knowledge and perceptions of stakeholders i.e. patients, pharmacists and prescribers, of generic medicines and to generic substitution with the passing of legislation. Three stakeholder specific questionnaires were developed to assess knowledge of and perceptions to generic medicines and generic substitution. Purposive samples of patients, prescribers and pharmacists were analysed. Descriptive quantitative and qualitative analyses were undertaken. A total of 762 healthcare professionals and 353 patients were recruited. The study highlighted that over 84% of patients were familiar with generic medicines and are supportive of the concept of generic substitution. Approximately 74% of prescribers and 84% of pharmacists were supportive of generic substitution in most cases. The main areas of concern highlighted by the healthcare professionals that might impact on the successful implementation of the policy, were the issue of bioequivalence with generic medicines, the computer software systems used at present in general practitioner (GP) surgeries and the availability of branded generics. The findings from this study identify a high baseline rate of acceptance to generic medicines and generic substitution among patients, prescribers and pharmacists in the Irish setting. The concerns of the main stakeholders provide a valuable insight into the potential difficulties that may arise in its implementation, and the need for on-going reassurance and proactive dissemination of the impact of the generic substitution policy. The existing positive attitude to generic medicines and generic substitution among key stakeholders in Ireland to generic substitution, combined with appropriate support and collaboration should result in the desired increase in rates of prescribing, dispensing and use of generic medicines.

  15. Is there a relationship between patient beliefs or communication about generic drugs and medication utilization?

    PubMed

    Shrank, William H; Cadarette, Suzanne M; Cox, Emily; Fischer, Michael A; Mehta, Jyotsna; Brookhart, Alan M; Avorn, Jerry; Choudhry, Niteesh K

    2009-03-01

    Insurers and policymakers strive to stimulate more cost-effective prescribing and, increasingly, are educating beneficiaries about generics. To evaluate the relationship between patient beliefs and communication about generic drugs and actual drug use. We performed a national mailed survey of a random sample of 2500 commercially-insured adults. Patient responses were linked to pharmacy claims data to assess actual generic medication use. We used factor analysis to develop 5 multi-item scales from patient survey responses that measured: (1) general preferences for generics, (2) generic safety/effectiveness, (3) generic cost/value, (4) comfort with generic substitution, and (5) communication with providers about generics. The relationship between each scale and the proportion of prescriptions filled for generics was assessed using linear regression, controlling for demographic, health, and insurance characteristics. Separate models were created for each scale and then all 5 scales were included simultaneously in a fully-adjusted model. The usable response rate was 48%. When evaluated independently, a 1 SD increase in each of the 5 scales was associated with a 3.1% to 6.3% increase in generic drug use (P < 0.05 for each). In the fully adjusted model, only 2 scales were significantly associated with generic drug use: comfort with generic substitution (P = 0.021) and communication with providers about generic drugs (P = 0.012). Generic drug use is most closely associated with the 2 actionable items we evaluated: communication with providers about generics and comfort with generic substitution. Educational campaigns that focus on these 2 domains may be most effective at influencing generic drug use.

  16. Monte Carlo simulations for generic granite repository studies

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Chu, Shaoping; Lee, Joon H; Wang, Yifeng

    In a collaborative study between Los Alamos National Laboratory (LANL) and Sandia National Laboratories (SNL) for the DOE-NE Office of Fuel Cycle Technologies Used Fuel Disposition (UFD) Campaign project, we have conducted preliminary system-level analyses to support the development of a long-term strategy for geologic disposal of high-level radioactive waste. A general modeling framework consisting of a near- and a far-field submodel for a granite GDSE was developed. A representative far-field transport model for a generic granite repository was merged with an integrated systems (GoldSim) near-field model. Integrated Monte Carlo model runs with the combined near- and farfield transport modelsmore » were performed, and the parameter sensitivities were evaluated for the combined system. In addition, a sub-set of radionuclides that are potentially important to repository performance were identified and evaluated for a series of model runs. The analyses were conducted with different waste inventory scenarios. Analyses were also conducted for different repository radionuelide release scenarios. While the results to date are for a generic granite repository, the work establishes the method to be used in the future to provide guidance on the development of strategy for long-term disposal of high-level radioactive waste in a granite repository.« less

  17. The Generic Resolution Advisor and Conflict Evaluator (GRACE) for Detect-And-Avoid Systems

    NASA Technical Reports Server (NTRS)

    Abramson, Michael; Refai, Mohamad; Santiago, Confesor

    2017-01-01

    Java Architecture for Detect-And-Avoid (DAA) Extensibility and Modeling (JADEM) was developed at NASA Ames Research Center as a research and modeling tool for Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS). UAS will be required to have DAA systems in order to fulfill the regulatory requirement to remain well clear'' of other traffic. JADEM supports research on technological requirements and Minimum Operational Performance Standards (MOPS) for UAS DAA systems by providing a flexible and extensible software platform that includes models and algorithms for all major DAA functions. This paper describes one of these algorithms, the Generic Resolution Advisor and Conflict Evaluator (GRACE). GRACE supports two core DAA functions: threat evaluation and guidance. GRACE is generic in the sense that it is designed to work with any aircraft or sensor type (both cooperative and non-cooperative), and to be used in various applications and DAA guidance concepts, thus supporting evolving MOPS requirements and research. GRACE combines flexibility, robustness, and computational efficiency. It has modest memory requirements and can handle multiple cooperative and noncooperative intruders. GRACE has been used as a core JADEM component in several real-time and fast-time experiments, including human-in-the-loop simulations and live flight tests.

  18. A low-cost approach to the exploration of Mars through a robotic technology demonstrator mission

    NASA Astrophysics Data System (ADS)

    Ellery, Alex; Richter, Lutz; Parnell, John; Baker, Adam

    2003-11-01

    We present a proposed robotic mission to Mars - Vanguard - for the Aurora Arrow programme which combines an extensive technology demonstrator with a high scientific return. The novel aspect of this technology demonstrator is the demonstration of "water mining" capabilities for in-situ resource utilisation in conjunction with high-value astrobiological investigation within a low mass lander package of 70 kg. The basic architecture comprises a small lander, a micro-rover and a number of ground-penetrating moles. This basic architecture offers the possibility of testing a wide variety of generic technologies associated with space systems and planetary exploration. The architecture provides for the demonstration of specific technologies associated with planetary surface exploration, and with the Aurora programme specifically. Technology demonstration of in-situ resource utilisation will be a necessary precursor to any future human mission to Mars. Furthermore, its modest mass overhead allows the reuse of the already built Mars Express bus, making it a very low cost option.

  19. A low-cost approach to the exploration of Mars through a robotic technology demonstrator mission

    NASA Astrophysics Data System (ADS)

    Ellery, Alex; Richter, Lutz; Parnell, John; Baker, Adam

    2006-10-01

    We present a proposed robotic mission to Mars—Vanguard—for the Aurora Arrow programme which combines an extensive technology demonstrator with a high scientific return. The novel aspect of this technology demonstrator is the demonstration of “water mining” capabilities for in situ resource utilisation (ISRU) in conjunction with high-value astrobiological investigation within a low-mass lander package of 70 kg. The basic architecture comprises a small lander, a micro-rover and a number of ground-penetrating moles. This basic architecture offers the possibility of testing a wide variety of generic technologies associated with space systems and planetary exploration. The architecture provides for the demonstration of specific technologies associated with planetary surface exploration, and with the Aurora programme specifically. Technology demonstration of ISRU will be a necessary precursor to any future human mission to Mars. Furthermore, its modest mass overhead allows the re-use of the already built Mars Express bus, making it a very low-cost option.

  20. Comparisons of RELAP5-3D Analyses to Experimental Data from the Natural Convection Shutdown Heat Removal Test Facility

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Bucknor, Matthew; Hu, Rui; Lisowski, Darius

    2016-04-17

    The Reactor Cavity Cooling System (RCCS) is an important passive safety system being incorporated into the overall safety strategy for high temperature advanced reactor concepts such as the High Temperature Gas- Cooled Reactors (HTGR). The Natural Convection Shutdown Heat Removal Test Facility (NSTF) at Argonne National Laboratory (Argonne) reflects a 1/2-scale model of the primary features of one conceptual air-cooled RCCS design. The project conducts ex-vessel, passive heat removal experiments in support of Department of Energy Office of Nuclear Energy’s Advanced Reactor Technology (ART) program, while also generating data for code validation purposes. While experiments are being conducted at themore » NSTF to evaluate the feasibility of the passive RCCS, parallel modeling and simulation efforts are ongoing to support the design, fabrication, and operation of these natural convection systems. Both system-level and high fidelity computational fluid dynamics (CFD) analyses were performed to gain a complete understanding of the complex flow and heat transfer phenomena in natural convection systems. This paper provides a summary of the RELAP5-3D NSTF model development efforts and provides comparisons between simulation results and experimental data from the NSTF. Overall, the simulation results compared favorably to the experimental data, however, further analyses need to be conducted to investigate any identified differences.« less

  1. Association of authorized generic marketing with prescription drug spending on antidepressants from 2000 to 2011.

    PubMed

    Cheng, Ning; Banerjee, Tannista; Qian, Jingjing; Hansen, Richard A

    Prior research suggests that authorized generic drugs increase competition and decrease prices, but little empirical evidence supports this conclusion. This study evaluated the impact of authorized generic marketing on brand and generic prices. Longitudinal analysis of the household component of the Medical Expenditure Panel Survey. Interview panels over 12 years, with a new panel each year. For each panel, 5 rounds of household interviews were conducted over 30 months. Nationally representative sample of the U.S. civilian noninstitutionalized population, focusing on people using 1 of 5 antidepressant drugs that became generically available between 2000 to 2011. Drugs and dose/formulations with versus without an authorized generic drug marketed. Multiple linear regression models with lagged variables evaluated the effect of an authorized generic on average inflation-adjusted brand and generic price, adjusting for payment sources, generic entry time, competitor price, and year. During 2000-2011, annual brand antidepressant utilization decreased from 51.47 to 7.52 million prescriptions, and generic antidepressant utilization increased from 0 to 88.83 million prescriptions. Over time, payment per prescription for brand prescriptions increased 25% overall, and generic payments decreased 70% for all payer types. With unadjusted data, after generic entry the average brand price decreased $0.59 per year with and $3.62 per year without an authorized generic in the market. Average generic prices decreased $10.30 per year with and $8.47 per year without an authorized generic in the market. In multiple regression models with lagged variables adjusted for heteroscedasticity, payer source, time since generic entry, competitor price, and year, authorized generics significantly reduced average payment for generic (-$3.03) and brand (-$60.64) prescriptions, and over time this price change slowly diminished. Availability of an authorized generic was associated with reduced average generic and brand price in the antidepressant market, supporting prior evidences. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

  2. Architecture Analysis of Wireless Power Transmission for Lunar Outposts

    DTIC Science & Technology

    2015-09-01

    through his work on wireless communication using radio wave propagation for both transmitting and receiving high frequency electricity using a focusing...Administration nm nanometers NRC National Research Council PGT platform generic technologies PMAD power management and distribution RF radio frequency xiv...GHz (Marzwell 2008). While the slot antenna can handle frequencies between 70 GHz and 150 GHz, it has been optimized for 94 GHz and has a radio

  3. Solid lubricants

    NASA Technical Reports Server (NTRS)

    Sliney, Harold E.

    1991-01-01

    The state of knowledge of solid lubricants is reviewed. The results of research on solid lubricants from the 1940's to the present are presented from a historical perspective. Emphasis is placed largely, but not exclusively, on work performed at NASA Lewis Research Center with a natural focus on aerospace applications. However, because of the generic nature of the research, the information presented in this review is applicable to most areas where solid lubricant technology is useful.

  4. Experimental Validation: Subscale Aircraft Ground Facilities and Integrated Test Capability

    NASA Technical Reports Server (NTRS)

    Bailey, Roger M.; Hostetler, Robert W., Jr.; Barnes, Kevin N.; Belcastro, Celeste M.; Belcastro, Christine M.

    2005-01-01

    Experimental testing is an important aspect of validating complex integrated safety critical aircraft technologies. The Airborne Subscale Transport Aircraft Research (AirSTAR) Testbed is being developed at NASA Langley to validate technologies under conditions that cannot be flight validated with full-scale vehicles. The AirSTAR capability comprises a series of flying sub-scale models, associated ground-support equipment, and a base research station at NASA Langley. The subscale model capability utilizes a generic 5.5% scaled transport class vehicle known as the Generic Transport Model (GTM). The AirSTAR Ground Facilities encompass the hardware and software infrastructure necessary to provide comprehensive support services for the GTM testbed. The ground facilities support remote piloting of the GTM aircraft, and include all subsystems required for data/video telemetry, experimental flight control algorithm implementation and evaluation, GTM simulation, data recording/archiving, and audio communications. The ground facilities include a self-contained, motorized vehicle serving as a mobile research command/operations center, capable of deployment to remote sites when conducting GTM flight experiments. The ground facilities also include a laboratory based at NASA LaRC providing near identical capabilities as the mobile command/operations center, as well as the capability to receive data/video/audio from, and send data/audio to the mobile command/operations center during GTM flight experiments.

  5. Is There a Relationship Between Patient Beliefs or Communication About Generic Drugs and Medication Utilization?

    PubMed Central

    Shrank, William H.; Cadarette, Suzanne M.; Cox, Emily; Fischer, Michael A.; Mehta, Jyotsna; Brookhart, Alan M.; Avorn, Jerry; Choudhry, Niteesh K.

    2009-01-01

    Background Insurers and policymakers strive to stimulate more cost-effective prescribing and, increasingly, are educating beneficiaries about generics. Objectives To evaluate the relationship between patient beliefs and communication about generic drugs and actual drug use. Research Design and Subjects We performed a national mailed survey of a random sample of 2500 commercially-insured adults. Patient responses were linked to pharmacy claims data to assess actual generic medication use. Measures We used factor analysis to develop 5 multi-item scales from patient survey responses that measured: (1) general preferences for generics, (2) generic safety/effectiveness, (3) generic cost/value, (4) comfort with generic substitution, and (5) communication with providers about generics. The relationship between each scale and the proportion of prescriptions filled for generics was assessed using linear regression, controlling for demographic, health, and insurance characteristics. Separate models were created for each scale and then all 5 scales were included simultaneously in a fully-adjusted model. Results The usable response rate was 48%. When evaluated independently, a 1 SD increase in each of the 5 scales was associated with a 3.1% to 6.3% increase in generic drug use (P < 0.05 for each). In the fully adjusted model, only 2 scales were significantly associated with generic drug use: comfort with generic substitution (P = 0.021) and communication with providers about generic drugs (P = 0.012). Conclusions Generic drug use is most closely associated with the 2 actionable items we evaluated: communication with providers about generics and comfort with generic substitution. Educational campaigns that focus on these 2 domains may be most effective at influencing generic drug use. PMID:19194329

  6. Generic process design and control strategies used to develop a dynamic model and training software for an IGCC plant with CO2 sequestration

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Provost, G.; Stone, H.; McClintock, M.

    2008-01-01

    To meet the growing demand for education and experience with the analysis, operation, and control of commercial-scale Integrated Gasification Combined Cycle (IGCC) plants, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) is leading a collaborative R&D project with participants from government, academia, and industry. One of the goals of this project is to develop a generic, full-scope, real-time generic IGCC dynamic plant simulator for use in establishing a world-class research and training center, as well as to promote and demonstrate the technology to power industry personnel. The NETL IGCC dynamic plant simulator will combine for the first timemore » a process/gasification simulator and a power/combined-cycle simulator together in a single dynamic simulation framework for use in training applications as well as engineering studies. As envisioned, the simulator will have the following features and capabilities: A high-fidelity, real-time, dynamic model of process-side (gasification and gas cleaning with CO2 capture) and power-block-side (combined cycle) for a generic IGCC plant fueled by coal and/or petroleum coke Full-scope training simulator capabilities including startup, shutdown, load following and shedding, response to fuel and ambient condition variations, control strategy analysis (turbine vs. gasifier lead, etc.), representative malfunctions/trips, alarms, scenarios, trending, snapshots, data historian, and trainee performance monitoring The ability to enhance and modify the plant model to facilitate studies of changes in plant configuration and equipment and to support future R&D efforts To support this effort, process descriptions and control strategies were developed for key sections of the plant as part of the detailed functional specification, which will form the basis of the simulator development. These plant sections include: Slurry Preparation Air Separation Unit Gasifiers Syngas Scrubbers Shift Reactors Gas Cooling, Medium Pressure (MP) and Low Pressure (LP) Steam Generation, and Knockout Sour Water Stripper Mercury Removal Selexol™ Acid Gas Removal System CO2 Compression Syngas Reheat and Expansion Claus Plant Hydrogenation Reactor and Gas Cooler Combustion Turbine (CT)-Generator Assemblies Heat Recovery Steam Generators (HRSGs) and Steam Turbine (ST)-Generator In this paper, process descriptions, control strategies, and Process & Instrumentation Diagram (P&ID) drawings for key sections of the generic IGCC plant are presented, along with discussions of some of the operating procedures and representative faults that the simulator will cover. Some of the intended future applications for the simulator are discussed, including plant operation and control demonstrations as well as education and training services such as IGCC familiarization courses.« less

  7. Shock tunnel studies of scramjet phenomena, supplement 8

    NASA Technical Reports Server (NTRS)

    Stalker, R. J.; Hollis, P.; Allen, G. A.; Roberts, G. T.; Tuttle, S.; Bakos, R. J.; Morgan, R. G.; Pulsonetti, M. V.; Brescianini, C.; Buttsworth, D. R.

    1993-01-01

    Reports by the staff of the University of Oueensland on various research studies related to the advancement of scramjet technology are presented. These reports document the tests conducted in the reflected shock tunnel T4 and supporting research facilities that have been used to study the injection, mixing, and combustion of hydrogen fuel in generic scramjets at flow conditions typical of hypersonic flight. In addition, topics include the development of instrumentation and measurement technology, such as combustor wall shear and stream composition in pulse facilities, and numerical studies and analyses of the scramjet combustor process and the test facility operation. This research activity is Supplement 8 under NASA Grant NAGW-674.

  8. Shock tunnel studies of scramjet phenomena, supplement 7

    NASA Technical Reports Server (NTRS)

    Bakos, R. J.; Morgan, R. G.; Tuttle, S. L.; Kelly, G. M.; Paull, A.; Simmons, J. M.; Stalker, R. J.; Pulsonetti, M. V.; Buttsworth, D.; Allen, G. A., Jr.

    1993-01-01

    Reports by the staff of the University of Queensland on various research studies related to the advancement of scramjet technology are presented. These reports document the tests conducted in the reflected shock tunnel T4 and supporting research facilities that have been used to study the injection, mixing, and combustion of hydrogen fuel in generic scramjets at flow conditions typical of hypersonic flight. In addition, topics include the development of instrumentation and measurement technology, such as combustor wall shear and stream composition in pulse facilities, and numerical studies and analyses of the scramjet combustor process and the test facility operation. This research activity is Supplement 7 under NASA Grant NAGW-674.

  9. Imaging Science Panel. Multispectral Imaging Science Working Group joint meeting with Information Science Panel: Introduction

    NASA Technical Reports Server (NTRS)

    1982-01-01

    The state-of-the-art of multispectral sensing is reviewed and recommendations for future research and development are proposed. specifically, two generic sensor concepts were discussed. One is the multispectral pushbroom sensor utilizing linear array technology which operates in six spectral bands including two in the SWIR region and incorporates capabilities for stereo and crosstrack pointing. The second concept is the imaging spectrometer (IS) which incorporates a dispersive element and area arrays to provide both spectral and spatial information simultaneously. Other key technology areas included very large scale integration and the computer aided design of these devices.

  10. Autonomy in military aircraft

    NASA Astrophysics Data System (ADS)

    Henderson, D. W.

    Military users are becoming increasingly dependent on satellites for vital services related to communication, surveillance information, navigation, and meteorological data. The current military spacecraft, however, need the services of a ground support network which is vulnerable in connection with a variety of threats. It has, therefore, been proposed to decrease the dependence of the satellites on the ground segment by improving satellite autonomy, and the Satellite Autonomy Program at the recently created Air Force Space Technology Center is developing the Autonomous Redundancy and Maintenance Management Subsystem (ARMMS) for a near term generic autonomy solution. Attention is given to the implementation of autonomy and technological requirements for ensuring autonomy.

  11. Stay Alive--Simulation for Situational Safety Awareness

    NASA Technical Reports Server (NTRS)

    Ruder, Michelle

    2008-01-01

    STAY ALIVE is an idea for a safety awareness simulation prototype, powered by gaming technology, that would make safety training enlightening, engaging and fun. Recalling initial instructions and using situational awareness principles, participants would escape a fire by choosing the appropriate door. Escape times would be measured while stressors increased. This presentation describes how STAY ALIVE utilizes first person point of view (PoV), a generic scenario, immersion- and presence-enhancing design, and ease of distribution to provide more people opportunity to realize, review, analyze and practice effective awareness behaviors. The goals for this prototype include facilitating interest in first-person PoV safety training and eliciting further suggestions on prevention technologies.

  12. The Co-Existence of Technology and Caring in the Theory of Technological Competency as Caring in Nursing.

    PubMed

    Locsin, Rozzano C

    2017-01-01

    The coexistence of technology and caring is best exemplified in nursing. The theory of Technological Competency as Caring in Nursing illuminates this coexistence as the essence of technology in health care premised on machine technologies as a generic concept of objects or things that are mechanical, organic, and electronic. With its timely development these technologies are continually imbued with artificial general intelligence. As such, the ultimate expression of machine technologies in nursing turns out to be autonomous robots (ARs) with future potentials of functions comparable to human persons. While theory-based nursing practice is essential to nursing care practice, quality human care, particularly with technologies assuming indispensable practice process mechanisms is critical. Some practice-based questions informing ARs and human person engagements in nursing care practice include, "Will ARs which are imbued with artificial intelligence replace nurses in their practice?" "What contributions to quality human health care will autonomous and artificially intelligent robots provide?" While these questions may reflect far-reaching ramifications of technologies in health care, it must also be acknowledged that these technologies are fundamental to the delivery of quality human health care now, and in the future. J. Med. Invest. 64: 160-164, February, 2017.

  13. The Market Dynamics of Generic Medicines in the Private Sector of 19 Low and Middle Income Countries between 2001 and 2011: A Descriptive Time Series Analysis

    PubMed Central

    Kaplan, Warren A.; Wirtz, Veronika J.; Stephens, Peter

    2013-01-01

    This observational study investigates the private sector, retail pharmaceutical market of 19 low and middle income countries (LMICs) in Latin America, Asia and the Middle East/South Africa analyzing the relationships between volume market share of generic and originator medicines over a time series from 2001 to 2011. Over 5000 individual pharmaceutical substances were divided into generic (unbranded generic, branded generic medicines) and originator categories for each country, including the United States as a comparator. In 9 selected LMICs, the market share of those originator substances with the largest decrease over time was compared to the market share of their counterpart generic versions. Generic medicines (branded generic plus unbranded generic) represent between 70 and 80% of market share in the private sector of these LMICs which exceeds that of most European countries. Branded generic medicine market share is higher than that of unbranded generics in all three regions and this is in contrast to the U.S. Although switching from an originator to its generic counterpart can save money, this narrative in reality is complex at the level of individual medicines. In some countries, the market behavior of some originator medicines that showed the most temporal decrease, showed switching to their generic counterpart. In other countries such as in the Middle East/South Africa and Asia, the loss of these originators was not accompanied by any change at all in market share of the equivalent generic version. For those countries with a significant increase in generic medicines market share and/or with evidence of comprehensive “switching” to generic versions, notably in Latin America, it would be worthwhile to establish cause-effect relationships between pharmaceutical policies and uptake of generic medicines. The absence of change in the generic medicines market share in other countries suggests that, at a minimum, generic medicines have not been strongly promoted. PMID:24098644

  14. The market dynamics of generic medicines in the private sector of 19 low and middle income countries between 2001 and 2011: a descriptive time series analysis.

    PubMed

    Kaplan, Warren A; Wirtz, Veronika J; Stephens, Peter

    2013-01-01

    This observational study investigates the private sector, retail pharmaceutical market of 19 low and middle income countries (LMICs) in Latin America, Asia and the Middle East/South Africa analyzing the relationships between volume market share of generic and originator medicines over a time series from 2001 to 2011. Over 5000 individual pharmaceutical substances were divided into generic (unbranded generic, branded generic medicines) and originator categories for each country, including the United States as a comparator. In 9 selected LMICs, the market share of those originator substances with the largest decrease over time was compared to the market share of their counterpart generic versions. Generic medicines (branded generic plus unbranded generic) represent between 70 and 80% of market share in the private sector of these LMICs which exceeds that of most European countries. Branded generic medicine market share is higher than that of unbranded generics in all three regions and this is in contrast to the U.S. Although switching from an originator to its generic counterpart can save money, this narrative in reality is complex at the level of individual medicines. In some countries, the market behavior of some originator medicines that showed the most temporal decrease, showed switching to their generic counterpart. In other countries such as in the Middle East/South Africa and Asia, the loss of these originators was not accompanied by any change at all in market share of the equivalent generic version. For those countries with a significant increase in generic medicines market share and/or with evidence of comprehensive "switching" to generic versions, notably in Latin America, it would be worthwhile to establish cause-effect relationships between pharmaceutical policies and uptake of generic medicines. The absence of change in the generic medicines market share in other countries suggests that, at a minimum, generic medicines have not been strongly promoted.

  15. Generics, Supergenerics and Patent Strategies--SMi's 13th Annual Meeting.

    PubMed

    Edwards, Catherine

    2010-07-01

    SMi's 13th Annual Meeting on Generics, Supergenerics and Patent Strategies, held in London, included topics covering new trends in the generics field, the difficulties faced by companies in entering the generics market and recent developments in IP. This conference report highlights selected presentations on generics in India, protecting pharmaceutical products in China, changes in generics law and litigation in the US and Europe, challenges for market selection and entry for generics companies, the influence of changes in the healthcare market on the generics industry, supergenerics, and biosimilars.

  16. Brand vs generic adverse event reporting patterns: An authorized generic-controlled evaluation of cardiovascular medications.

    PubMed

    Alatawi, Y; Rahman, Md M; Cheng, N; Qian, J; Peissig, P L; Berg, R L; Page, C D; Hansen, R A

    2018-06-01

    Some public scepticism exists about generics in terms of whether brand and generic drugs produce identical outcomes. This study explores whether adverse event (AE) reporting patterns are similar between brand and generic drugs, using authorized generics (AGs) as a control for possible generic drug perception biases. Events reported to the FDA Adverse Event Reporting System from the years 2004-2015 were analysed. Drugs were classified as brand, AG or generic based on drug and manufacturer names. Reports were included if amlodipine, losartan, metoprolol extended release (ER) or simvastatin were listed as primary or secondary suspect drugs. Disproportionality analyses using the reporting odds ratio (ROR) assessed the relative rate of reporting labelled AEs compared to reporting these AEs with all other drugs. The Breslow-Day test compared RORs across brand, AG and generic. Interrupted time series analysis evaluated the impact of generic entry on reporting trends. Generics accounted for significant percentages of total U.S. reports, but AGs accounted for smaller percentages of reports, including for amlodipine (14.26%), losartan (1.48%), metoprolol ER (0.35%) and simvastatin (0.70%). Whereas the RORs were significantly different for multiple brand vs generic comparisons, the AG vs generic comparisons yielded fewer statistically significant findings. Namely, only the ROR for AG differed from generic for amlodipine with peripheral oedema (P < .01). Inconsistent reporting patterns were observed more between brand and generic compared with AG and generic. Use of AGs as a control for perception biases against generics is useful, but this approach can be limited by small AG report numbers. Requiring the manufacturer name to be printed on the prescription bottle or packaging could improve the accuracy of assignment for products being reported. © 2017 John Wiley & Sons Ltd.

  17. Improving Global Access to New Vaccines: Intellectual Property, Technology Transfer, and Regulatory Pathways

    PubMed Central

    2014-01-01

    The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers. PMID:25211753

  18. Large deployable antenna program. Phase 1: Technology assessment and mission architecture

    NASA Technical Reports Server (NTRS)

    Rogers, Craig A.; Stutzman, Warren L.

    1991-01-01

    The program was initiated to investigate the availability of critical large deployable antenna technologies which would enable microwave remote sensing missions from geostationary orbits as required for Mission to Planet Earth. Program goals for the large antenna were: 40-meter diameter, offset-fed paraboloid, and surface precision of 0.1 mm rms. Phase 1 goals were: to review the state-of-the-art for large, precise, wide-scanning radiometers up to 60 GHz; to assess critical technologies necessary for selected concepts; to develop mission architecture for these concepts; and to evaluate generic technologies to support the large deployable reflectors necessary for these missions. Selected results of the study show that deployable reflectors using furlable segments are limited by surface precision goals to 12 meters in diameter, current launch vehicles can place in geostationary only a 20-meter class antenna, and conceptual designs using stiff reflectors are possible with areal densities of 2.4 deg/sq m.

  19. Biomedical sensing analyzer (BSA) for mobile-health (mHealth)-LTE.

    PubMed

    Adibi, Sasan

    2014-01-01

    The rapid expansion of mobile-based systems, the capabilities of smartphone devices, as well as the radio access and cellular network technologies are the wind beneath the wing of mobile health (mHealth). In this paper, the concept of biomedical sensing analyzer (BSA) is presented, which is a novel framework, devised for sensor-based mHealth applications. The BSA is capable of formulating the Quality of Service (QoS) measurements in an end-to-end sense, covering the entire communication path (wearable sensors, link-technology, smartphone, cell-towers, mobile-cloud, and the end-users). The characterization and formulation of BSA depend on a number of factors, including the deployment of application-specific biomedical sensors, generic link-technologies, collection, aggregation, and prioritization of mHealth data, cellular network based on the Long-Term Evolution (LTE) access technology, and extensive multidimensional delay analyses. The results are studied and analyzed in a LabView 8.5 programming environment.

  20. Application of CFCC technology to hot gas filtration applications

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Richlen, S.

    1995-06-01

    Discussion will feature high temperature filter development under the DOE`s Office of Industrial Technologies Continuous Fiber Ceramic Composite (CFCC) Program. Within the CFCC Program there are four industry projects and a national laboratory technology support project. Atlantic Research, Babcock & Wilcox, DuPont Lanxide Composites, and Textron are developing processing methods to produce CFCC Components with various types of matrices and composites, along with the manufacturing methods to produce industrial components, including high temperature gas filters. The Oak Ridge National Laboratory is leading a National Laboratory/University effort to increase knowledge of such generic and supportive technology areas as environmental degradation, measurementmore » of mechanical properties, long-term performance, thermal shock and thermal cycling, creep and fatigue, and non-destructive characterization. Tasks include composite design, materials characterization, test methods, and performance-related phenomena, that will support the high temperature filter activities of industry and government.« less

  1. Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways.

    PubMed

    Crager, Sara Eve

    2014-11-01

    The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

  2. [Improving global access to new vaccines: intellectual property, technology transfer, and regulatory pathways].

    PubMed

    Crager, Sara Eve

    2015-01-01

    The 2012 World Health Assembly Global Vaccine Action Plan called for global access to new vaccines within 5 years of licensure. Current approaches have proven insufficient to achieve sustainable vaccine pricing within such a timeline. Paralleling the successful strategy of generic competition to bring down drug prices, a clear consensus is emerging that market entry of multiple suppliers is a critical factor in expeditiously bringing down prices of new vaccines. In this context, key target objectives for improving access to new vaccines include overcoming intellectual property obstacles, streamlining regulatory pathways for biosimilar vaccines, and reducing market entry timelines for developing-country vaccine manufacturers by transfer of technology and know-how. I propose an intellectual property, technology, and know-how bank as a new approach to facilitate widespread access to new vaccines in low- and middle-income countries by efficient transfer of patented vaccine technologies to multiple developing-country vaccine manufacturers.

  3. Comparison of Generic-to-Brand Switchback Rates Between Generic and Authorized Generic Drugs.

    PubMed

    Hansen, Richard A; Qian, Jingjing; Berg, Richard; Linneman, James; Seoane-Vazquez, Enrique; Dutcher, Sarah K; Raofi, Saeid; Page, C David; Peissig, Peggy

    2017-04-01

    Generic drugs contain identical active ingredients as their corresponding brand drugs and are pharmaceutically equivalent and bioequivalent, whereas authorized generic drugs (AGs) contain both identical active and inactive ingredients as their corresponding brand drugs but are marketed as generics. This study compares generic-to-brand switchback rates between generic and AGs. Retrospective cohort study. Claims and electronic health record data from a regional U.S. health care system. The full cohort consisted of 5542 unique patients who received select branded drugs during the 6 months prior to their generic drug market availability (between 1999 and 2014) and then were switched to an AG or generic drug within 30 months of generic drug entry. For these patients, 5929 unique patient-drug combinations (867 with AGs and 5062 with generic drugs) were evaluated. Ten drugs with AGs and generics marketed between 1999 and 2014 were evaluated. The date of the first generic prescription was considered the index date for each drug, and it marked the beginning of follow-up to evaluate the occurrence of generic-to-brand switchback patterns over the subsequent 30 months. Switchback rates were compared between patients receiving AGs versus those receiving generics using multivariable Cox proportional hazards models, controlling for individual drug effects, age, sex, Charlson Comorbidity Score, pre-index drug use characteristics, and pre-index health care utilization. Among the 5542 unique patients who switched from brand to generic or brand to AG, 264 (4.8%) switched back to the brand drug. Overall switchback rates were similar for AGs compared with generics (hazard ratio [HR] 0.86, 95% confidence interval [CI] 0.65-1.15). The likelihood of switchback was higher for alendronate (HR 1.64, 95% CI 1.20-2.23) and simvastatin (HR 1.81, 95% CI 1.30-2.54) and lower for amlodipine (HR 0.27, 95% CI 0.17-0.42) compared with the other drugs evaluated. Overall switchback rates were similar between AG and generic drug users, indirectly supporting similar efficacy and tolerability profiles for brand and generic drugs. Reasons for differences in switchback rates among specific products need to be explored further. © 2017 Pharmacotherapy Publications, Inc.

  4. Encouraging generic use can yield significant savings.

    PubMed

    Zimmerman, Christina

    2012-11-01

    Key findings. (1) Zero copayment for generic drugs is the greatest influencer of generic statin utilization. (2) Both higher copayments for generic drugs and lower copayments for competing brands are associated with a decreased probability of using generic statins. (3) Prior authorization and step therapy requirements for brand-name statins are associated with an increased use of generic drugs. (4) Greater use of generic statins should reduce costs for patients, plans, and Medicare.

  5. 27 CFR 4.24 - Generic, semi-generic, and non-generic designations of geographic significance.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Generic, semi-generic, and non-generic designations of geographic significance. 4.24 Section 4.24 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND...

  6. Generic drugs in Brazil: known by many, used by few.

    PubMed

    Bertoldi, Andréa D; Barros, Aluísio J D; Hallal, Pedro C

    2005-01-01

    This study evaluated knowledge and use of generic drugs in a population-based sample of adults from a southern Brazilian city. The outcomes were: the proportion of generics in total medicines used; theoretical and practical knowledge about generics; and strategies used to buy medicines on medical prescriptions. The recall period for drug utilization was 15 days. The proportion of generics in total medicines was 3.9%. While 86.0% knew that generics cost less and 70.0% that the quality is similar to brand name medicines, only 57.0% knew any packaging characteristics that distinguish generics from other medicines. The highest proportion of generic drug utilization was in the antimicrobial pharmacological group. A brand name medicine (with a brand similar to the generic name) was mistakenly classified as a generic through photos by 48.0% of the interviewees. Among subjects who bought medicines in the 15-day period, 18.9% reported buying a generic, but this result should be interpreted with caution, because the population frequently fails to differentiate between generics and other medicines.

  7. Comparison of brand versus generic antiepileptic drug adverse event reporting rates in the U.S. Food and Drug Administration Adverse Event Reporting System (FAERS).

    PubMed

    Rahman, Md Motiur; Alatawi, Yasser; Cheng, Ning; Qian, Jingjing; Plotkina, Annya V; Peissig, Peggy L; Berg, Richard L; Page, David; Hansen, Richard A

    2017-09-01

    Despite the cost saving role of generic anti-epileptic drugs (AEDs), debate exists as to whether generic substitution of branded AEDs may lead to therapeutic failure and increased toxicity. This study compared adverse event (AE) reporting rates for brand vs. authorized generic (AG) vs. generic AEDs. Since AGs are pharmaceutically identical to brand but perceived as generics, the generic vs. AG comparison minimized potential bias against generics. Events reported to the U.S. Food and Drug Administration Adverse Event Reporting System between January 2004 to March 2015 with lamotrigine, carbamazepine, and oxcarbazepine listed as primary or secondary suspect were classified as brand, generic, or AG based on the manufacturer. Disproportionality analyses using the reporting odds ratio (ROR) assessed the relative rate of reporting of labeled AEs compared to reporting these events with all other drugs. The Breslow-Day statistic compared RORs across brand, AG, and other generics using a Bonferroni-corrected P<0.01. A total of 27,150 events with lamotrigine, 13,950 events with carbamazepine, and 5077 events with oxcarbazepine were reported, with generics accounting for 27%, 41%, and 32% of reports, respectively. Although RORs for the majority of known AEs were different between brand and generics for all three drugs of interest (Breslow-Day P<0.001), RORs generally were similar for AG and generic comparisons. Generic lamotrigine and carbamazepine were more commonly involved in reports of suicide or suicidal ideation compared with the respective AGs based on a multiple comparison-adjusted P<0.01. Similar AED reporting rates were observed for the AG and generic comparisons for most outcomes and drugs, suggesting that brands and generics have similar reporting rates after accounting for generic perception biases. Disproportional suicide reporting was observed for generics compared with AGs and brand, although this finding needs further study. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Knowledge, perceptions and use of generic drugs: a cross sectional study

    PubMed Central

    de Lira, Claudio Andre Barbosa; Oliveira, Jéssica Nathalia Soares; Andrade, Marília dos Santos; Vancini-Campanharo, Cássia Regina; Vancini, Rodrigo Luiz

    2014-01-01

    Objective To assess the level of knowledge, perceptions and usage profile for generic drugs among laypersons. Methods A cross-sectional study was conducted with 278 volunteers (180 women and 98 men, aged 37.1±15.8 years). A questionnaire was drawn up with questions on their use, perceptions and knowledge of generic drugs. Results Most respondents (99.6%) knew that generic drugs exist, but only 48.6% were able to define them correctly, while 78.8% of the respondents had some information about generics. This information was obtained mainly through television (49.3%). In terms of generic drug characteristics, 79.1% stated that they were confident about their efficacy, 74.8% believed that generic drugs have the same effect as branded medications, 88.8% said that generics were priced lower than branded medications, and 80.2% stated that they bought generic drugs because of price. With regard to drugs prescribed by medical practitioners, 17.6% of the participants said that their doctors never prescribed generics and only 7.5% confirmed that their doctors always prescribed generics. Conclusion For the lay public, the sample in this study has sufficient knowledge of generic drugs in terms of definition, efficacy and cost. Consequently, the volunteers interviewed are very likely to use generics. Furthermore, the results of this study indicate that programs should be implemented in order to boost generic drug prescriptions by medical practitioners. PMID:25295444

  9. Transformation of standardized clinical models based on OWL technologies: from CEM to OpenEHR archetypes

    PubMed Central

    Legaz-García, María del Carmen; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás; Chute, Christopher G; Tao, Cui

    2015-01-01

    Introduction The semantic interoperability of electronic healthcare records (EHRs) systems is a major challenge in the medical informatics area. International initiatives pursue the use of semantically interoperable clinical models, and ontologies have frequently been used in semantic interoperability efforts. The objective of this paper is to propose a generic, ontology-based, flexible approach for supporting the automatic transformation of clinical models, which is illustrated for the transformation of Clinical Element Models (CEMs) into openEHR archetypes. Methods Our transformation method exploits the fact that the information models of the most relevant EHR specifications are available in the Web Ontology Language (OWL). The transformation approach is based on defining mappings between those ontological structures. We propose a way in which CEM entities can be transformed into openEHR by using transformation templates and OWL as common representation formalism. The transformation architecture exploits the reasoning and inferencing capabilities of OWL technologies. Results We have devised a generic, flexible approach for the transformation of clinical models, implemented for the unidirectional transformation from CEM to openEHR, a series of reusable transformation templates, a proof-of-concept implementation, and a set of openEHR archetypes that validate the methodological approach. Conclusions We have been able to transform CEM into archetypes in an automatic, flexible, reusable transformation approach that could be extended to other clinical model specifications. We exploit the potential of OWL technologies for supporting the transformation process. We believe that our approach could be useful for international efforts in the area of semantic interoperability of EHR systems. PMID:25670753

  10. Development of utility generic functional requirements for electronic work packages and computer-based procedures

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Oxstrand, Johanna

    The Nuclear Electronic Work Packages - Enterprise Requirements (NEWPER) initiative is a step toward a vision of implementing an eWP framework that includes many types of eWPs. This will enable immediate paper-related cost savings in work management and provide a path to future labor efficiency gains through enhanced integration and process improvement in support of the Nuclear Promise (Nuclear Energy Institute 2016). The NEWPER initiative was organized by the Nuclear Information Technology Strategic Leadership (NITSL) group, which is an organization that brings together leaders from the nuclear utility industry and regulatory agencies to address issues involved with information technology usedmore » in nuclear-power utilities. NITSL strives to maintain awareness of industry information technology-related initiatives and events and communicates those events to its membership. NITSL and LWRS Program researchers have been coordinating activities, including joint organization of NEWPER-related meetings and report development. The main goal of the NEWPER initiative was to develop a set of utility generic functional requirements for eWP systems. This set of requirements will support each utility in their process of identifying plant-specific functional and non-functional requirements. The NEWPER initiative has 140 members where the largest group of members consists of 19 commercial U.S. nuclear utilities and eleven of the most prominent vendors of eWP solutions. Through the NEWPER initiative two sets of functional requirements were developed; functional requirements for electronic work packages and functional requirements for computer-based procedures. This paper will describe the development process as well as a summary of the requirements.« less

  11. What use is generic prescribing?

    PubMed Central

    Archer, Michael

    1985-01-01

    The dispensing of generic preparations at four dispensing chemist shops was investigated by means of a questionnaire. Certain generic prescriptions result in the dispensing of proprietary products despite the existence of generic preparations, and the pharmacist may be reimbursed for the cost of the proprietary drug which has been dispensed. Not all generic prescriptions result in the dispensing of cheaper drugs because of the methods of payment to chemists. If doctors write more generic prescriptions there will ultimately be more dispensing of generic products. Even in the case of drugs still under patent, prescribing by generic name should be encouraged. The savings achieved by generic prescribing are to some extent at the cost of the dispensing chemists. The method and scale of payments for dispensing requires urgent review. PMID:4032358

  12. Generic lamotrigine versus brand-name Lamictal bioequivalence in patients with epilepsy: A field test of the FDA bioequivalence standard.

    PubMed

    Ting, Tricia Y; Jiang, Wenlei; Lionberger, Robert; Wong, Jessica; Jones, Jace W; Kane, Maureen A; Krumholz, Allan; Temple, Robert; Polli, James E

    2015-09-01

    To test the current U.S. Food and Drug Administration (FDA) bioequivalence standard in a comparison of generic and brand-name drug pharmacokinetic (PK) performance in "generic-brittle" patients with epilepsy under clinical use conditions. This randomized, double-blind, multiple-dose, steady-state, fully replicated bioequivalence study compared generic lamotrigine to brand-name Lamictal in "generic-brittle" patients with epilepsy (n = 34) who were already taking lamotrigine. Patients were repeatedly switched between masked Lamictal and generic lamotrigine. Intensive PK blood sampling at the end of each 2-week treatment period yielded two 12-h PK profiles for brand-name and generic forms for each patient. Steady-state area under the curve (AUC), peak plasma concentration (Cmax ), and minimum plasma concentration (Cmin ) data were subjected to conventional average bioequivalence (ABE) analysis, reference-scaled ABE analysis, and within-subject variability (WSV) comparisons. In addition, generic-versus-brand comparisons in individual patients were performed. Secondary clinical outcomes included seizure frequency and adverse events. Generic demonstrated bioequivalence to brand. The 90% confidence intervals of the mean for steady-state AUC, Cmax , and Cmin for generic-versus-brand were 97.2-101.6%, 98.8-104.5%, and 93.4-101.0%, respectively. The WSV of generic and brand were also similar. Individual patient PK ratios for generic-versus-brand were similar but not identical, in part because brand-versus-brand profiles were not identical, even though subjects were rechallenged with the same product. Few subjects had seizure exacerbations or tolerability issues with product switching. One subject, however, reported 267 focal motor seizures, primarily on generic, although his brand and generic PK profiles were practically identical. Some neurologists question whether bioequivalence in healthy volunteers ensures therapeutic equivalence of brand and generic antiepileptic drugs in patients with epilepsy, who may be at increased risk for problems with brand-to-generic switching. Bioequivalence results in "generic-brittle" patients with epilepsy under clinical conditions support the soundness of the FDA bioequivalence standards. Adverse events on generic were not related to the small, allowable PK differences between generic and brand. Wiley Periodicals, Inc. © 2015 International League Against Epilepsy.

  13. Impact of medicare part D plan features on use of generic drugs.

    PubMed

    Tang, Yan; Gellad, Walid F; Men, Aiju; Donohue, Julie M

    2014-06-01

    Little is known about how Medicare Part D plan features influence choice of generic versus brand drugs. To examine the association between Part D plan features and generic medication use. Data from a 2009 random sample of 1.6 million fee-for-service, Part D enrollees aged 65 years and above, who were not dually eligible or receiving low-income subsidies, were used to examine the association between plan features (generic cost-sharing, difference in brand and generic copay, prior authorization, step therapy) and choice of generic antidepressants, antidiabetics, and statins. Logistic regression models accounting for plan-level clustering were adjusted for sociodemographic and health status. Generic cost-sharing ranged from $0 to $9 for antidepressants and statins, and from $0 to $8 for antidiabetics (across 5th-95th percentiles). Brand-generic cost-sharing differences were smallest for statins (5th-95th percentiles: $16-$37) and largest for antidepressants ($16-$64) across plans. Beneficiaries with higher generic cost-sharing had lower generic use [adjusted odds ratio (OR)=0.97, 95% confidence interval (CI), 0.95-0.98 for antidepressants; OR=0.97, 95% CI, 0.96-0.98 for antidiabetics; OR=0.94, 95% CI, 0.92-0.95 for statins]. Larger brand-generic cost-sharing differences and prior authorization were significantly associated with greater generic use in all categories. Plans could increase generic use by 5-12 percentage points by reducing generic cost-sharing from the 75th ($7) to 25th percentiles ($4-$5), increasing brand-generic cost-sharing differences from the 25th ($25-$26) to 75th ($32-$33) percentiles, and using prior authorization and step therapy. Cost-sharing features and utilization management tools were significantly associated with generic use in 3 commonly used medication categories.

  14. Do higher-priced generic medicines enjoy a competitive advantage under reference pricing?

    PubMed

    Puig-Junoy, Jaume

    2012-11-01

    In many countries with generic reference pricing, generic producers and distributors compete by means of undisclosed discounts offered to pharmacies in order to reduce acquisition costs and to induce them to dispense their generic to patients in preference over others. The objective of this article is to test the hypothesis that under prevailing reference pricing systems for generic medicines, those medicines sold at a higher consumer price may enjoy a competitive advantage. Real transaction prices for 179 generic medicines acquired by pharmacies in Spain have been used to calculate the discount rate on acquisition versus reimbursed costs to pharmacies. Two empirical hypotheses are tested: the discount rate at which pharmacies acquire generic medicines is higher for those pharmaceutical presentations for which there are more generic competitors; and, the discount rate at which pharmacies acquire generic medicines is higher for those pharmaceutical forms for which the consumer price has declined less in relation to the consumer price of the brand drug before generic entry (higher-priced generic medicines). An average discount rate of 39.3% on acquisition versus reimbursed costs to pharmacies has been observed. The magnitude of the discount positively depends on the number of competitors in the market. The higher the ratio of the consumer price of the generic to that of the brand drug prior to generic entry (i.e. the smaller the price reduction of the generic in relation to the brand drug), the larger the discount rate. Under reference pricing there is intense price competition among generic firms in the form of unusually high discounts to pharmacies on official ex-factory prices reimbursed to pharmacies. However, this effect is highly distorting because it favours those medicines with a higher relative price in relation to the brand price before generic entry.

  15. Questionnaire on the awareness of generic drugs among outpatients and medical staff.

    PubMed

    Hoshi, S; Kimura, H

    2008-06-01

    Generic drugs are not as widely used in Japan as they are in the West. The objective of this study was to survey the awareness of generic drugs among outpatients and medical staff and propose methods of promoting the use of generic drugs. Our survey showed that 86.7% of respondents were aware of generic drugs. This is a higher awareness rate than that in a survey of other groups conducted last year. One reason to explain this higher awareness is the recent increase in generic drug advertisements both in newspapers and on television. However, a point of note is that generic drug usage has not increased. Our survey also showed that generic drug awareness was differed widely among age groups, as younger respondents were much more aware of generic drugs than older respondents. Still, about 40% of respondents who were aware of generic drugs did not realize that they were less expensive than name-brand drugs ? including 30% of medical staff. In addition to continuing advertisement of generic drugs in the media, medical doctors and pharmacists should also be encouraged to endorse the use of generic drugs. Furthermore a new system allowing for substitution prescriptions started in April 2008 and consequently pharmacists can now play an important role in promoting the use of generic drugs.

  16. Latest Sensors and Data Acquisition Development Efforts at KSC

    NASA Technical Reports Server (NTRS)

    Perotti, Jose M.

    2002-01-01

    This viewgraph presentation summarizes the characteristics required on sensors by consumers desiring access to space, a long term plan developed at KSC (Kennedy Space Center) to identify promising technologies for NASA's own future sensor needs, and the characteristics of several smart sensors already developed. Also addressed are the computer hardware and architecture used to operate sensors, and generic testing capabilities. Consumers desire sensors which are lightweight, inexpensive, intelligent, and easy to use.

  17. Strategic Mobility 21: Modeling, Simulation, and Analysis

    DTIC Science & Technology

    2010-04-14

    using AnyLogic , which is a Java programmed, multi-method simulation modeling tool developed by XJ Technologies. The last section examines the academic... simulation model from an Arena platform to an AnyLogic based Web Service. MATLAB is useful for small problems with few nodes, but GAMS/CPLEX is better... Transportation Modeling Studio TM . The SCASN modeling and simulation program was designed to be generic in nature to allow for use by both commercial and

  18. ECUT: Energy Conversion and Utilization Technologies program. Biocatalysis project

    NASA Technical Reports Server (NTRS)

    1990-01-01

    The Biocatalysis Project is a mission-oriented, applied research and exploratory development activity directed toward resolution of the major generic technical barriers that impede the development of biologically catalyzed commercial chemical production. The approach toward achieving project objectives involves an integrated participation of Universities, Industrial Companies and Government Research Laboratories. The Project's technical activities were organized into three work elements: molecular modeling and applied genetics; bioprocess engineering; and bioprocess design and assessment.

  19. CAS - A Turboprop Solution for the COIN Fight

    DTIC Science & Technology

    2009-01-01

    Worlds First Civilian Tiltrotor. http://www.bellagusta.com/air ba main.cfm. Accessed 13 Jan 2009. Blake, Brett R , AT-6-The Best Investmentfor the Long War...Terroism and Counterinsurgency, CRS for Congress RL32737, Washington DC: Congressional Research Service, 24 Jan. 2005. Blake, Brett R Major USAF. AT-6...www.aviationweek.com/aw/generic/channel .jsp?channel= awst # (accessed 15 Jan 2009). 7 Bolkcom and Katzman, 24. 8 U.S. Congress, Office ofTechnology

  20. The Effects of Thermal/Blast Synergism on the Nuclear Vulnerability of a Generic Aircraft Structure.

    DTIC Science & Technology

    1984-01-01

    Army Nateriel Development Technology Center and Readiness Command ATTN: CRDABH-X; CRDABH-S ATTN: DRCDMD-ST P.O. Box 1500 5001 Eisenhower Avenue jd...VULNERBBILITY OF A..(U) ARMY ARMAMENT RESEARCH AND DEVELOPMENT CENTER ABERDEEN PROVIN. UNCLASSIFIED R J PEARSON ET AL. JAN 84 FARBRL-TR-02540 F/’O 15...ARMAMENT RESEARCH AND DEVELOPMENT CENIEII BALLISTIC RESEARCH LABORATORY ABERDEEN PROVING GROUND, MARYLAND Approved for public relese; distribution

  1. Analysis of French generic medicines retail market: why the use of generic medicines is limited.

    PubMed

    Dylst, Pieter; Vulto, Arnold; Simoens, Steven

    2014-12-01

    The market share of generic medicines in France is low compared to other European countries. This perspective paper provides an overview of the generic medicines retail market in France and how the current policy environment may affect the long-term sustainability. Looking at the French generic medicines retail market and the surrounding regulatory framework, all conditions seem to be in place to create a healthy generic medicines market: the country has well-respected regulatory authorities, generic medicines enter the market in a timely manner and prices of generic medicines are competitive compared with other European countries. Despite the success of the demand-side policies targeted at pharmacists and patients, those targeted at physicians were less successful due to a lack of enforcement and a lack of trust in generic medicines by French physicians. Recommendations to increase the use of generic medicines in France round off this perspective paper.

  2. Overview of ESA life support activities in preparation of future exploration

    NASA Astrophysics Data System (ADS)

    Lasseur, Christophe; Paille, Christel

    2016-07-01

    Since 1987, the European Space Agency has been active in the field of Life Support development. When compare to its international colleagues, it is clear that ESA started activities in the field with a "delay of around 25 years. Due to this situation and to avoid duplication, ESA decided to focus more on long term manned missions and to consider more intensively regenerative technologies as well as the associated risks management ( e.g. physical, chemical and contaminants). Fortunately or not, during the same period, no clear plan of exploration and consequently not specific requirements materialized. This force ESA to keep a broader and generic approach of all technologies. Today with this important catalogue of technologies and know-how, ESA is contemplating the different scenario of manned exploration beyond LEO. In this presentation we review the key scenario of future exploration, and identify the key technologies who loo the more relevant. An more detailed status is presented on the key technologies and their development plan for the future.

  3. Generic Divide and Conquer Internet-Based Computing

    NASA Technical Reports Server (NTRS)

    Follen, Gregory J. (Technical Monitor); Radenski, Atanas

    2003-01-01

    The growth of Internet-based applications and the proliferation of networking technologies have been transforming traditional commercial application areas as well as computer and computational sciences and engineering. This growth stimulates the exploration of Peer to Peer (P2P) software technologies that can open new research and application opportunities not only for the commercial world, but also for the scientific and high-performance computing applications community. The general goal of this project is to achieve better understanding of the transition to Internet-based high-performance computing and to develop solutions for some of the technical challenges of this transition. In particular, we are interested in creating long-term motivation for end users to provide their idle processor time to support computationally intensive tasks. We believe that a practical P2P architecture should provide useful service to both clients with high-performance computing needs and contributors of lower-end computing resources. To achieve this, we are designing dual -service architecture for P2P high-performance divide-and conquer computing; we are also experimenting with a prototype implementation. Our proposed architecture incorporates a master server, utilizes dual satellite servers, and operates on the Internet in a dynamically changing large configuration of lower-end nodes provided by volunteer contributors. A dual satellite server comprises a high-performance computing engine and a lower-end contributor service engine. The computing engine provides generic support for divide and conquer computations. The service engine is intended to provide free useful HTTP-based services to contributors of lower-end computing resources. Our proposed architecture is complementary to and accessible from computational grids, such as Globus, Legion, and Condor. Grids provide remote access to existing higher-end computing resources; in contrast, our goal is to utilize idle processor time of lower-end Internet nodes. Our project is focused on a generic divide and conquer paradigm and on mobile applications of this paradigm that can operate on a loose and ever changing pool of lower-end Internet nodes.

  4. Perception of Generic Prescription Drugs and Utilization of Generic Drug Discount Programs

    PubMed Central

    Omojasola, Anthony; Hernandez, Mike; Sansgiry, Sujit; Jones, Lovell

    2012-01-01

    Objective Our study aimed to assess patient’s perceptions of generic drugs and utilization of generic drug discount programs. Design, Setting and Participants A survey was administered to adult participants at community health centers and community-based organizations in Houston, Texas, USA (n=525). Main Outcome Measures Multivariate logistic regression was used to quantify the strength of association between generic drug perception and utilization of generic drug discount programs. Results Respondents who agreed that “Generic prescription drugs are as effective as brand name prescription drugs,” were 3 times as likely to utilize generic drug discount programs (AOR: 3.0, 95% CI: 1.8–4.8, P<.001). Compared to non-Hispanic Whites, African Americans (OR: 10.2; 95% CI: 1.4–76.4) and Hispanics (OR: 10.3; 95% CI: 1.3–79.4) were 10 times as likely to agree that generic drugs have more side effects than brand name drugs. Conclusion Race/ethnicity had no impact in utilization of generic drug discount programs, despite racial disparities in perception toward generic drugs’ side effects and generic drugs being inferior to brand name drugs. PMID:23140080

  5. The Portuguese generic medicines market: a policy analysis

    PubMed Central

    Simoens, Steven

    2008-01-01

    Objectives: This study aims to conduct a descriptive analysis of the policy environment surrounding the generic medicines retail market in Portugal. The policy analysis focuses on supply-side measures (i.e. market access, pricing, reference-pricing and reimbursement of generic medicines) and demand-side measures (i.e. incentives for physicians to prescribe, for pharmacists to dispense and for patients to use generic medicines). Methods: The policy analysis was based on an international literature review. Also, a simulation exercise was carried out to compute potential savings from substituting generic for originator medicines in Portugal using IMS Health data. Results: Portugal has developed a successful generic medicines market by increasing reimbursement of generic medicines (until October 2005), by introducing a reference-pricing system, by encouraging physicians to prescribe by international non-proprietary name (INN), and by allowing generic substitution by pharmacists. However, the development of the generic medicines market has been hindered by the existence of copies, pricing regulation, certain features of the reference-pricing system, weak incentives for physicians to prescribe generic medicines and a financial disincentive for pharmacists to dispense generic medicines. Increased generic substitution would be expected to reduce public expenditure on originator medicines by 45%. Conclusions: The development of the Portuguese generic medicines market has mainly been fuelled by supply-side measures. To support the further expansion of the market, policy makers need to strengthen demand-side measures inciting physicians to prescribe, pharmacists to dispense and patients to use generic medicines. PMID:25152781

  6. Overview study of Space Power Technologies for the advanced energetics program. [spacecraft

    NASA Technical Reports Server (NTRS)

    Taussig, R.; Gross, S.; Millner, A.; Neugebauer, M.; Phillips, W.; Powell, J.; Schmidt, E.; Wolf, M.; Woodcock, G.

    1981-01-01

    Space power technologies are reviewed to determine the state-of-the-art and to identify advanced or novel concepts which promise large increases in performance. The potential for incresed performance is judged relative to benchmarks based on technologies which have been flight tested. Space power technology concepts selected for their potentially high performance are prioritized in a list of R & D topical recommendations for the NASA program on Advanced Energetics. The technology categories studied are solar collection, nuclear power sources, energy conversion, energy storage, power transmission, and power processing. The emphasis is on electric power generation in space for satellite on board electric power, for electric propulsion, or for beamed power to spacecraft. Generic mission categories such as low Earth orbit missions and geosynchronous orbit missions are used to distinguish general requirements placed on the performance of power conversion technology. Each space power technology is judged on its own merits without reference to specific missions or power systems. Recommendations include 31 space power concepts which span the entire collection of technology categories studied and represent the critical technologies needed for higher power, lighter weight, more efficient power conversion in space.

  7. Measuring performance in off-patent drug markets: a methodological framework and empirical evidence from twelve EU Member States.

    PubMed

    Kanavos, Panos

    2014-11-01

    This paper develops a methodological framework to help evaluate the performance of generic pharmaceutical policies post-patent expiry or after loss of exclusivity in non-tendering settings, comprising five indicators (generic availability, time delay to and speed of generic entry, number of generic competitors, price developments, and generic volume share evolution) and proposes a series of metrics to evaluate performance. The paper subsequently tests this framework across twelve EU Member States (MS) by using IMS data on 101 patent expired molecules over the 1998-2010 period. Results indicate that significant variation exists in generic market entry, price competition and generic penetration across the study countries. Size of a geographical market is not a predictor of generic market entry intensity or price decline. Regardless of geographic or product market size, many off patent molecules lack generic competitors two years after loss of exclusivity. The ranges in each of the five proposed indicators suggest, first, that there are numerous factors--including institutional ones--contributing to the success of generic entry, price decline and market penetration and, second, MS should seek a combination of supply and demand-side policies in order to maximise cost-savings from generics. Overall, there seems to be considerable potential for faster generic entry, uptake and greater generic competition, particularly for molecules at the lower end of the market. Copyright © 2014. Published by Elsevier Ireland Ltd.

  8. Predictors of generic substitution: The role of psychological, sociodemographic, and contextual factors.

    PubMed

    Drozdowska, Aleksandra; Hermanowski, Tomasz

    2016-01-01

    Escalating pharmaceutical costs have become a global challenge for both governments and patients. Generic substitution is one way of decreasing these costs. The aim of this study was to investigate factors associated with patients' choice between generic drugs and innovator drugs. The survey was conducted in June 2013, 1000 people from across Poland were chosen as a representative population sample. The outcome (a preference for generics/a preference for innovator pharmaceuticals/no preference) was modeled by multinomial logistic regression, adjusted for several variables describing patients' sensitivity to selected generic features (price, brand, and country of origin), to third-party opinions about generics (information on generics in the mass media, opinions of health professionals (i.e. physicians, pharmacists), relatives/friends), as well as patients' personal experiences and income per household. The results supported the predictive capacity of most independent variables (except for patient sensitivity to the country of origin and to the information on generics in the mass media), denoting patients' preferences toward generic substitution. Patient sensitivity to recommendations by physicians, generic brand, and household income were the strongest predictors of the choice between generic and innovator pharmaceuticals (P < 0.001). The probability of choosing generics over innovator drugs was significantly higher among respondents with the lowest income levels, in those who were indifferent to generic brand or their physician's opinion, as well as in respondents who were sensitive to recommendations by pharmacists or attached a greater value to a past experience with generics (their own experience or that of relatives/friends). In consideration of the foregoing, awareness-raising campaigns may be recommended, supported by a variety of systemic solutions and tools to encourage generic substitution. Copyright © 2016 Elsevier Inc. All rights reserved.

  9. [Generic drugs: good or bad? Physician's knowledge of generic drugs and prescribing habits].

    PubMed

    García, A J; Martos, F; Leiva, F; Sánchez de la Cuesta, F

    2003-01-01

    In this article we analyze the responses of 1220 Spanish physicians who participated in a survery about generic drugs. A previously validated questionnaire was sent to physicians through the Spanish Medical Councils of the different provinces. Four items were analyzed: what doctors know about generic drugs (knowledge); physicians' prescribing habits concerning these drugs (attitude and professional competence); how prescription of generic drugs effects pharmaceutical costs amd, finally, what doctors believe a generic drug should be. The influence of physician-related variables (age, type of contract, specialty, workload, etc.) on prescribing of generic drugs was also analyzed. In view of the results, we believe that to rationalize expenditure through and appropriate policy on generic drugs Spanish health authorities should offer more and better training and information (clear and independent) about what generic drugs are.

  10. 76 FR 17182 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-03-28

    ... Activities: Proposed Collection; Comment Request; Generic Clearance for the Collection of Qualitative... Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service...: Title: Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery. Abstract...

  11. Generic Example Proving Criteria for All

    ERIC Educational Resources Information Center

    Yopp, David; Ely, Rob; Johnson­-Leung, Jennifer

    2015-01-01

    We review literature that discusses generic example proving and highlight ambiguities that pervade our research community's discourse about generic example arguments. We distinguish between pedagogical advice for choosing good examples that can serve as generic examples when teaching and advice for developing generic example arguments. We provide…

  12. The Full Kostant-Toda Hierarchy on the Positive Flag Variety

    NASA Astrophysics Data System (ADS)

    Kodama, Yuji; Williams, Lauren

    2015-04-01

    We study some geometric and combinatorial aspects of the solution to the full Kostant-Toda (f-KT) hierarchy, when the initial data is given by an arbitrary point on the totally non-negative (tnn) flag variety of . The f-KT flows on the tnn flag variety are complete, and we show that their asymptotics are completely determined by the cell decomposition of the tnn flag variety given by Rietsch (Total positivity and real flag varieties. Ph.D. Thesis, Massachusetts Institute of Technology, Cambridge, 1998). Our results represent the first results on the asymptotics of the f-KT hierarchy (and even the f-KT lattice); moreover, our results are not confined to the generic flow, but cover non-generic flows as well. We define the f-KT flow on the weight space via the moment map, and show that the closure of each f-KT flow forms an interesting convex polytope which we call a Bruhat interval polytope. In particular, the Bruhat interval polytope for the generic flow is the permutohedron of the symmetric group . We also prove analogous results for the full symmetric Toda hierarchy, by mapping our f-KT solutions to those of the full symmetric Toda hierarchy. In the appendix we show that Bruhat interval polytopes are generalized permutohedra, in the sense of Postnikov (Int. Math. Res. Not. IMRN (6):1026-1106, 2009).

  13. Leininger's model for discoveries at The Farm and midwifery services to the Amish.

    PubMed

    Finn, J

    1995-01-01

    This paper is a descriptive report and analysis of a transcultural nurse's experiences immersed in a hippie subculture at The Farm near Summertown, Tennessee. This subcultural group initially was established over 20 years ago as a community with a unique worldview which included pacifistic, vegetarian, and collective values and beliefs. This community prefers health care provided by their own community members who serve as generic care providers and also as folk midwives for home births. Leininger's (1991) Theory of Culture Care Diversity and Universality and her Sunrise Model provided the framework for discovering and understanding this unique subcultural group. The major components of Leininger's Sunrise Model including worldview, cultural values, and lifeways were used in the analysis. The important social structure factors discovered included environmental context, technological factors, religious and philosophical factors, political and legal factors, economic factors, and educational factors. The Farm community's culture care expressions, patterns and practices for health and well being were discovered including generic and folk systems of care. The farm midwives provide primary care and home birthing care to a nearby Old Order Amish community. The Amish culture and health care seeking patterns are discussed including their selective use of generic, folk, and professional care systems. The discoveries that resulted from the application of Leininger's Sunrise Model are presented including implications for transcultural nurse caregiving.

  14. Cost effectiveness and value of information analyses of islet cell transplantation in the management of 'unstable' type 1 diabetes mellitus.

    PubMed

    Wallner, Klemens; Shapiro, A M James; Senior, Peter A; McCabe, Christopher

    2016-04-09

    Islet cell transplantation is a method to stabilize type 1 diabetes patients with hypoglycemia unawareness and unstable blood glucose levels by reducing insulin dependency and protecting against severe hypoglycemia through restoring endogenous insulin secretion. This study analyses the current cost-effectiveness of this technology and estimates the value of further research to reduce uncertainty around cost-effectiveness. We performed a cost-utility analysis using a Markov cohort model with a mean patient age of 49 to simulate costs and health outcomes over a life-time horizon. Our analysis used intensive insulin therapy (IIT) as comparator and took the provincial healthcare provider perspective. Cost and effectiveness data for up to four transplantations per patient came from the University of Alberta hospital. Costs are expressed in 2012 Canadian dollars and effectiveness in quality-adjusted life-years (QALYs) and life years. To characterize the uncertainty around expected outcomes, we carried out a probabilistic sensitivity analysis within the Bayesian decision-analytic framework. We performed a value-of-information analysis to identify priority areas for future research under various scenarios. We applied a structural sensitivity analysis to assess the dependence of outcomes on model characteristics. Compared to IIT, islet cell transplantation using non-generic (generic) immunosuppression had additional costs of $150,006 ($112,023) per additional QALY, an average gain of 3.3 life years, and a probability of being cost-effective of 0.5 % (28.3 %) at a willingness-to-pay threshold of $100,000 per QALY. At this threshold the non-generic technology has an expected value of perfect information (EVPI) of $260,744 for Alberta. This increases substantially in cost-reduction scenarios. The research areas with the highest partial EVPI are costs, followed by natural history, and effectiveness and safety. Current transplantation technology provides substantial improvements in health outcomes over conventional therapy for highly selected patients with 'unstable' type 1 diabetes. However, it is much more costly and so is not cost-effective. The value of further research into the cost-effectiveness is dependent upon treatment costs. Further, we suggest the value of information should not only be derived from current data alone when knowing that this data will most likely change in the future.

  15. NETL to establish Dynamic Simulation Research and Training Center to promote IGCC technology with CO2 cpture

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Provost, G.; Zitney, S.; Turton, R.

    2009-01-01

    To meet increasing demand for education and experience with commercial-scale, coal-fired, integrated gasification combined cycle (IGCC) plants with CO2 capture, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) is leading a project to deploy a generic, full-scope, real-time IGCC dynamic plant simulator for use in establishing a world-class research and training center, and to promote and demonstrate IGCC technology to power industry personnel. The simulator, being built by Invensys Process Systems (IPS), will be installed at two separate sites, at NETL and West Virginia University (WVU), and will combine a process/gasification simulator with a power/combined-cycle simulator together inmore » a single dynamic simulation framework for use in engineering research studies and training applications. The simulator, scheduled to be launched in mid-year 2010, will have the following capabilities: High-fidelity, dynamic model of process-side (gasification and gas cleaning with CO2 capture) and power-block-side (combined cycle) for a generic IGCC plant fueled by coal and/or petroleum coke. Highly flexible configuration that allows concurrent training on separate gasification and combined cycle simulators, or up to two IGCC simulators. Ability to enhance and modify the plant model to facilitate studies of changes in plant configuration, equipment, and control strategies to support future R&D efforts. Training capabilities including startup, shutdown, load following and shedding, response to fuel and ambient condition variations, control strategy analysis (turbine vs. gasifier lead, etc.), representative malfunctions/trips, alarms, scenarios, trending, snapshots, data historian, etc. To support this effort, process descriptions and control strategies were developed for key sections of the plant as part of the detailed functional specification, which is serving as the basis of the simulator development. In this paper, we highlight the contents of the detailed functional specification for the simulator. We also describe the engineering, design, and expert testing process that the simulator will undergo in order to ensure that maximum fidelity is built into the generic simulator. Future applications and training programs associated with gasification, combined cycle, and IGCC simulations are discussed, including plant operation and control demonstrations, as well as education and training services.« less

  16. Perspectives of physicians practicing in low and middle income countries towards generic medicines: a narrative review.

    PubMed

    Hassali, Mohamed Azmi; Wong, Zhi Yen; Alrasheedy, Alian A; Saleem, Fahad; Mohamad Yahaya, Abdul Haniff; Aljadhey, Hisham

    2014-09-01

    This review was conducted to document published literature related to physicians' knowledge, attitudes, and perceptions of generic medicines in low- and middle-income countries (LMICs) and to compare the findings with high-income countries. A systematic search of articles published in peer-reviewed journals from January 2001 to February 2013 was performed. The search comprised nine electronic databases. The search strategy involved using Boolean operators for combinations of the following terms: generic medicines, generic medications, generic drugs, generic, generic substitution, generic prescribing, international non-proprietary, prescribers, doctors, general practitioners, physicians, and specialists. Sixteen articles were included in this review. The majority (n=11) were from high income countries and five from LMICs. The main difference between high income countries and LMICs is that physicians from high income countries generally have positive views whereas those from LMICs tend to have mixed views regarding generic medicines. Few similarities were identified among different country income groups namely low level of physicians' knowledge of the basis of bioequivalence testing, cost of generic medicines as an encouraging factor for generic medicine prescribing, physicians' concerns towards safety and quality of generic medicines and effect of pharmaceutical sales representative on generic medicine prescribing. The present literature review revealed that physicians from LMICs tend to have mixed views regarding generic medicines. This may be due to differences in the health care system and pharmaceutical funding system, medicine policies, the level of educational interventions, and drug information sources in countries of different income levels. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  17. Assessing bioequivalence of generic antiepilepsy drugs.

    PubMed

    Krauss, Gregory L; Caffo, Brian; Chang, Yi-Ting; Hendrix, Craig W; Chuang, Kelly

    2011-08-01

    Patients with epilepsy are often concerned that switching between brand-name and generic formulations of antiepilepsy drugs (AEDs) may cause clinically significant changes in plasma drug concentrations. We assessed bioequivalence (BE) studies for approved generic AEDs to evaluate US Food and Drug Administration claims that: (1) generic AEDs are accurate copies of reference formulations; (2) delivery of reference formulations may be as variable as generic AEDs and so provide no increased benefit; and (3) switches between generic AED formulations are safe and effective. We determined differences in 90% confidence interval limits for total drug exposure (AUC(0-t) ) and peak concentration (Cmax) ratios of generic and reference formulations during fasting and fed BE studies. We simulated BE between generic formulations after adjusting for reference values. AUC(0-t) values of approved reference and generic formulations differed by <15% in 99% of BE studies; Cmax differed by <15% in 89% of studies. Food affected variability of Cmax but not AUC(0-t) . Intersubject variability in Cmax and AUC(0-t) was small and similar for reference and generic products. In simulated switches between 595 pairs of generic AED formulations, estimated AUC(0-t) differed by >15% for 17% of pairs; estimated Cmax differed by >15% for 39%. AEDs with low bioavailability and solubility (eg, oxcarbazepine) had the greatest variability in BE. Most generic AED products provide total drug delivery (AUC) similar to reference products; differences in peak concentrations between formulations are more common. Switches between generic AED products may cause greater changes in plasma drug concentrations than generic substitutions of reference products. Copyright © 2011 American Neurological Association.

  18. ResearchEHR: use of semantic web technologies and archetypes for the description of EHRs.

    PubMed

    Robles, Montserrat; Fernández-Breis, Jesualdo Tomás; Maldonado, Jose A; Moner, David; Martínez-Costa, Catalina; Bosca, Diego; Menárguez-Tortosa, Marcos

    2010-01-01

    In this paper, we present the ResearchEHR project. It focuses on the usability of Electronic Health Record (EHR) sources and EHR standards for building advanced clinical systems. The aim is to support healthcare professional, institutions and authorities by providing a set of generic methods and tools for the capture, standardization, integration, description and dissemination of health related information. ResearchEHR combines several tools to manage EHR at two different levels. The internal level that deals with the normalization and semantic upgrading of exiting EHR by using archetypes and the external level that uses Semantic Web technologies to specify clinical archetypes for advanced EHR architectures and systems.

  19. Shock Tunnel Studies of Scramjet Phenomena 1993

    NASA Technical Reports Server (NTRS)

    Stalker, R. J.; Bakos, R. J.; Morgan, R. G.; Porter, L.; Mee, D.; Paull, A.; Tuttle, S.; Simmons, J. M.; Wendt, M.; Skinner, K.

    1995-01-01

    Reports by the staff of the University of Queensland on various research studies related to the advancement of scramjet technology and hypervelocity pulse test facilities are presented. These reports document the tests conducted in the reflected shock tunnel T4 and supporting research facilities that have been used to study the injection, mixing, and combustion of hydrogen fuel in generic scramjets at flow conditions typical of hypersonic flight. In addition, topics include the development of instrumentation and measurement technology, such as combustor wall shear and stream composition in pulse facilities, and numerical studies and analyses of the scramjet combustor process and the test facility operation. This research activity is Supplement 10 under NASA Grant NAGw-674.

  20. Ceramic Technology for Advanced Heat Engines Project. Semiannual progress report, October 1984-March 1985

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1985-09-01

    A five-year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applicationsmore » in these engines.« less

  1. Ceramic technology for advanced heat engines project: Semiannual progress report for April through September 1986

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Not Available

    1987-03-01

    An assessment of needs was completed, and a five-year project plan was developed with extensive input from private industry. Objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barriermore » and wear applications in these engines.« less

  2. The risks and costs of multiple-generic substitution of topiramate.

    PubMed

    Duh, M S; Paradis, P E; Latrémouille-Viau, D; Greenberg, P E; Lee, S P; Durkin, M B; Wan, G J; Rupnow, M F T; LeLorier, J

    2009-06-16

    To investigate clinical and economic consequences following generic substitution of one vs multiple generics of topiramate (Topamax; Ortho-McNeil Neurologics, Titusville, NJ). Medical and pharmacy claims data of Régie de l'Assurance-Maladie du Québec from January 2006 to October 2007 were used. Patients with epilepsy treated with topiramate were selected. An open-cohort design was used to classify the observation period into periods of brand, single-generic, and multiple-generic use. One-year generic-switch and switchback-to-brand rates were estimated using Kaplan-Meier methodology. Medical resource utilization and costs were compared among the three periods using multivariate regression analysis. In total, 948 patients were observed during 1,105 person-years of brand use, 233 person-years of single-generic use, and 92 person-years of multiple-generic use. A total of 23% of generic users received at least two different generic versions. Compared to brand use, multiple-generic use was associated with higher utilization of other prescription drugs (incidence rate ratio [IRR] = 1.27, 95% confidence interval [CI] = 1.24-1.31), higher hospitalization rates (0.48 vs 0.83 visit/person-year, IRR = 1.65, 95% CI = 1.28-2.13), and longer hospital stays (2.6 vs 3.9 days/person-year, IRR = 1.43, 95% CI = 1.27-1.60), but the effect was less pronounced in single-generic use (hospitalization: IRR = 1.08, 95% CI = 0.88-1.34, length of stay: IRR = 1.12, 95% CI = 1.03-1.23). The risk of head injury or fracture was nearly three times higher (hazard ratio = 2.84, 95% CI = 1.24-6.48) following a generic-to-generic switch compared to brand use. The total annualized health care cost per patient was higher in the multiple-generic than brand periods by C$1,716 (cost ratio = 1.21, p = 0.0420). Multiple-generic substitution of topiramate was significantly associated with negative outcomes, such as hospitalizations and injuries, and increased health care costs.

  3. 76 FR 39893 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-07-07

    ...; Comment Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery... (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery.... SUPPLEMENTARY INFORMATION: Title: Generic Clearance for the Collection of Qualitative Feedback on Agency Service...

  4. 76 FR 19359 - Agency Information Collection Activities: Proposed Collection; Comment Request; Generic Clearance...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-04-07

    ... Request; Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery AGENCY... Information Collection Request (Generic ICR): ``Generic Clearance for the Collection of Qualitative Feedback...: Title: Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery. Abstract...

  5. Methods for making a porous nuclear fuel element

    DOEpatents

    Youchison, Dennis L; Williams, Brian E; Benander, Robert E

    2014-12-30

    Porous nuclear fuel elements for use in advanced high temperature gas-cooled nuclear reactors (HTGR's), and to processes for fabricating them. Advanced uranium bi-carbide, uranium tri-carbide and uranium carbonitride nuclear fuels can be used. These fuels have high melting temperatures, high thermal conductivity, and high resistance to erosion by hot hydrogen gas. Tri-carbide fuels, such as (U,Zr,Nb)C, can be fabricated using chemical vapor infiltration (CVI) to simultaneously deposit each of the three separate carbides, e.g., UC, ZrC, and NbC in a single CVI step. By using CVI, the nuclear fuel may be deposited inside of a highly porous skeletal structure made of, for example, reticulated vitreous carbon foam.

  6. Summary of the Advanced Reactor Design Criteria (ARDC) Phase 2 Activities

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Holbrook, Mark Raymond

    This report provides an end-of-year summary reflecting the progress and status of proposed regulatory design criteria for advanced non-LWR designs in accordance with the Level 3 milestone in M3AT-15IN2001017 in work package AT-15IN200101. These criteria have been designated as ARDC, and they provide guidance to future applicants for addressing the GDC that are currently applied specifically to LWR designs. The report provides a summary of Phase 2 activities related to the various tasks associated with ARDC development and the subsequent development of example adaptations of ARDC for Sodium Fast Reactor (SFR) and modular High Temperature Gas-cooled Reactor (HTGR) designs.

  7. The "trapped fraction" and interfacial jumps of concentration in fission products release from coated fuel particles

    NASA Astrophysics Data System (ADS)

    Ivanov, A. S.; Rusinkevich, A. A.; Taran, M. D.

    2018-01-01

    The FP Kinetics computer code [1] designed for calculation of fission products release from HTGR coated fuel particles was modified to allow consideration of chemical bonding, effects of limited solubility and component concentration jumps at interfaces between coating layers. Curves of Cs release from coated particles calculated with the FP Kinetics and PARFUME [2] codes were compared. It has been found that the consideration of concentration jumps at silicon carbide layer interfaces allows giving an explanation of some experimental data on Cs release obtained from post-irradiation heating tests. The need to perform experiments for measurement of solubility limits in coating materials was noted.

  8. MIMO-OFDM System's Performance Using LDPC Codes for a Mobile Robot

    NASA Astrophysics Data System (ADS)

    Daoud, Omar; Alani, Omar

    This work deals with the performance of a Sniffer Mobile Robot (SNFRbot)-based spatial multiplexed wireless Orthogonal Frequency Division Multiplexing (OFDM) transmission technology. The use of Multi-Input Multi-Output (MIMO)-OFDM technology increases the wireless transmission rate without increasing transmission power or bandwidth. A generic multilayer architecture of the SNFRbot is proposed with low power and low cost. Some experimental results are presented and show the efficiency of sniffing deadly gazes, sensing high temperatures and sending live videos of the monitored situation. Moreover, simulation results show the achieved performance by tackling the Peak-to-Average Power Ratio (PAPR) problem of the used technology using Low Density Parity Check (LDPC) codes; and the effect of combating the PAPR on the bit error rate (BER) and the signal to noise ratio (SNR) over a Doppler spread channel.

  9. Experimental and simulation study results for video landmark acquisition and tracking technology

    NASA Technical Reports Server (NTRS)

    Schappell, R. T.; Tietz, J. C.; Thomas, H. M.; Lowrie, J. W.

    1979-01-01

    A synopsis of related Earth observation technology is provided and includes surface-feature tracking, generic feature classification and landmark identification, and navigation by multicolor correlation. With the advent of the Space Shuttle era, the NASA role takes on new significance in that one can now conceive of dedicated Earth resources missions. Space Shuttle also provides a unique test bed for evaluating advanced sensor technology like that described in this report. As a result of this type of rationale, the FILE OSTA-1 Shuttle experiment, which grew out of the Video Landmark Acquisition and Tracking (VILAT) activity, was developed and is described in this report along with the relevant tradeoffs. In addition, a synopsis of FILE computer simulation activity is included. This synopsis relates to future required capabilities such as landmark registration, reacquisition, and tracking.

  10. Small engine technology programs

    NASA Technical Reports Server (NTRS)

    Niedzwiecki, Richard W.

    1990-01-01

    Described here is the small engine technology program being sponsored at the Lewis Research Center. Small gas turbine research is aimed at general aviation, commuter aircraft, rotorcraft, and cruise missile applications. The Rotary Engine program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. The Automotive Gas Turbine (AGT) and Heavy-Duty Diesel Transport Technology (HDTT) programs are sponsored by DOE. The Compound Cycle Engine program is sponsored by the Army. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The HDTT, rotary technology, and the compound cycle programs are all examining approaches to minimum heat rejection, or 'adiabatic' systems employing advanced materials. The AGT program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbine programs will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects.

  11. 76 FR 57767 - Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-16

    ... NUCLEAR REGULATORY COMMISSION [NRC-2011-0204] Proposed Generic Communication; Draft NRC Generic Letter 2011-XX: Seismic Risk Evaluations for Operating Reactors AGENCY: Nuclear Regulatory Commission... FR 54507), that requested public comment on Draft NRC Generic Letter 2011- XX: Seismic Risk...

  12. 42 CFR 447.506 - Authorized generic drugs.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 42 Public Health 4 2014-10-01 2014-10-01 false Authorized generic drugs. 447.506 Section 447.506... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PAYMENTS FOR SERVICES Payment for Drugs § 447.506 Authorized generic drugs. (a) Authorized generic drug defined. For the purposes of this subpart, an authorized generic drug...

  13. 42 CFR 447.506 - Authorized generic drugs.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 42 Public Health 4 2011-10-01 2011-10-01 false Authorized generic drugs. 447.506 Section 447.506... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PAYMENTS FOR SERVICES Payment for Drugs § 447.506 Authorized generic drugs. (a) Authorized generic drug defined. For the purposes of this subpart, an authorized generic drug...

  14. 42 CFR 447.506 - Authorized generic drugs.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 42 Public Health 4 2012-10-01 2012-10-01 false Authorized generic drugs. 447.506 Section 447.506... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PAYMENTS FOR SERVICES Payment for Drugs § 447.506 Authorized generic drugs. (a) Authorized generic drug defined. For the purposes of this subpart, an authorized generic drug...

  15. 42 CFR 447.506 - Authorized generic drugs.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 42 Public Health 4 2010-10-01 2010-10-01 false Authorized generic drugs. 447.506 Section 447.506... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PAYMENTS FOR SERVICES Payment for Drugs § 447.506 Authorized generic drugs. (a) Authorized generic drug defined. For the purposes of this subpart, an authorized generic drug...

  16. 42 CFR 447.506 - Authorized generic drugs.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 42 Public Health 4 2013-10-01 2013-10-01 false Authorized generic drugs. 447.506 Section 447.506... (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PAYMENTS FOR SERVICES Payment for Drugs § 447.506 Authorized generic drugs. (a) Authorized generic drug defined. For the purposes of this subpart, an authorized generic drug...

  17. Cognitive and affective determinants of generic drug acceptance and use: cross-sectional and experimental findings

    PubMed Central

    Dohle, Simone; Siegrist, Michael

    2013-01-01

    An increase in generic substitution could be a viable approach to reduce global healthcare expenditures. In many countries, however, generic drug use is rather low. This study examines cognitive predictors (knowledge and beliefs) and affective predictors (general affect and sacred values) to explain generic drug acceptance and use. Data for the study come from a random postal survey conducted in Switzerland (N = 668). A detailed knowledge scale about generic drugs was developed. In addition, an experimental choice task was constructed in which respondents chose between branded and generic drugs. Generic drug acceptance as well as drug choices were influenced by knowledge, beliefs, and affect. It was also found that generic substitution is chosen less frequently for a more severe illness. Key insights could be used for developing information material or interventions aimed at increasing the substitution of generic drugs in order to make health care more affordable. PMID:25632372

  18. Two-year-olds use the generic/non-generic distinction to guide their inferences about novel kinds

    PubMed Central

    Graham, Susan A.; Nayer, Samantha L.; Gelman, Susan A.

    2011-01-01

    These studies investigated 24- and 30-month-olds’ sensitivity to generic versus nongeneric language when acquiring knowledge about novel kinds. Toddlers were administered an inductive inference task, during which they heard a generic noun-phrase (e.g., “Blicks drink milk”) or a non-generic noun-phrase (e.g., “This blick drinks milk”) paired with an action (e.g., drinking) modeled on an object. They were then provided with the model and a non-model exemplar and asked to imitate the action. After hearing non-generic phrases, 30-month-olds, but not 24-month-olds, imitated more often with the model than with the non-model exemplar. In contrast, after hearing generic phrases, 30-month-olds imitated equally often with both exemplars. These results suggest that 30-month-olds use the generic/non-generic distinction to guide their inferences about novel kinds. PMID:21410928

  19. Methodological Considerations for Comparison of Brand Versus Generic Versus Authorized Generic Adverse Event Reports in the US Food and Drug Administration Adverse Event Reporting System (FAERS).

    PubMed

    Rahman, Md Motiur; Alatawi, Yasser; Cheng, Ning; Qian, Jingjing; Peissig, Peggy L; Berg, Richard L; Page, David C; Hansen, Richard A

    2017-12-01

    The US Food and Drug Administration Adverse Event Reporting System (FAERS), a post-marketing safety database, can be used to differentiate brand versus generic safety signals. To explore the methods for identifying and analyzing brand versus generic adverse event (AE) reports. Public release FAERS data from January 2004 to March 2015 were analyzed using alendronate and carbamazepine as examples. Reports were classified as brand, generic, and authorized generic (AG). Disproportionality analyses compared reporting odds ratios (RORs) of selected known labeled serious adverse events stratifying by brand, generic, and AG. The homogeneity of these RORs was compared using the Breslow-Day test. The AG versus generic was the primary focus since the AG is identical to brand but marketed as a generic, therefore minimizing generic perception bias. Sensitivity analyses explored how methodological approach influenced results. Based on 17,521 US event reports involving alendronate and 3733 US event reports involving carbamazepine (immediate and extended release), no consistently significant differences were observed across RORs for the AGs versus generics. Similar results were obtained when comparing reporting patterns over all time and just after generic entry. The most restrictive approach for classifying AE reports yielded smaller report counts but similar results. Differentiation of FAERS reports as brand versus generic requires careful attention to risk of product misclassification, but the relative stability of findings across varying assumptions supports the utility of these approaches for potential signal detection.

  20. The effect of generic competition on the price of brand-name drugs.

    PubMed

    Lexchin, Joel

    2004-04-01

    Literature from the US has shown that brand-name manufacturers do not compete on price once generic competitors become available. This study was undertaken to investigate if this is also true in Canada. Editions of the Ontario Drug Benefit Formulary were used to identify brand-name drugs that lacked generic competition in July 1990 but had acquired one or more generic competitors by December 1998. Prices of the brand-name drugs were compared before generic competition, at the point when generic competition started and subsequent to the initiation of competition. Price changes for 81 different products in 144 separate presentations were analysed. There was no statistically significant change in brand-name prices when generic competition started. The movement of brand-name prices was not influenced by whether the generic was made by the company producing the brand-name product or price freezes imposed by the Ontario government. When generics first became available having four or more generics was associated with a rise in the price of the brand-name drugs compared to having one, two or three generic competitor(s). The lack of price competition may lead to increased costs in the private market. Private insurance companies generally do not require generic substitution and some provinces do not require generic substitution for cash-paying customers. Maintaining higher prices on brand-name drugs impacts on the prices of new patented medications coming onto the Canadian market under the current pricing guidelines of the Patented Medicine Prices Review Board.

  1. Improving the assessment of prescribing: use of a 'substitution index'.

    PubMed

    Kunisawa, Susumu; Otsubo, Tetsuya; Lee, Jason; Imanaka, Yuichi

    2013-07-01

    To analyse the current and potential utilization of generic drugs in Japan, to examine the maximum possible cost savings from generic drug use and to develop a fairer measure to assess the level of generic drug substitution. We conducted a cross-sectional retrospective analysis of nine million dispensing records during January to March 2010 in Kyoto Prefecture. Maximum potential quantity-based shares were defined as the quantity of generic drugs used plus the quantity of branded drugs that could have been replaced by generic drugs divided by the quantity of all drugs dispensed. We developed a 'substitution index', defined as the proportion of generic drugs out of the total drugs substitutable with generic drugs (based on quantity rather than cost). Generic drugs had a quantity-based share of 17.9%, a cost-based share of 8.9% and a maximum potential quantity-based share of 50.1%, which is lower than the actual generic drug shares of some other countries. The maximum possible cost savings as a result of generic drug substitution was 16.5%. We also observed wide variations in maximum potential quantity-based shares between health care sectors and health care institutions. Simple comparisons based on quantity-based shares may misrepresent the actual generic drug use. A substitution index that takes into account the maximum potential quantity-based share of generic drugs as a fairer measure may promote more realistic goals and encourage generic drug usage.

  2. A developmental analysis of generic nouns in Southern Peruvian Quechua.

    PubMed

    Mannheim, Bruce; Gelman, Susan A; Escalante, Carmen; Huayhua, Margarita; Puma, Rosalía

    2010-01-01

    Generic noun phrases (e.g., "Cats like to drink milk") are a primary means by which adults express generalizations to children, yet they pose a challenging induction puzzle for learners. Although prior research has established that English speakers understand and produce generic noun phrases by preschool age, little is known regarding the cross-cultural generality of generic acquisition. Southern Peruvian Quechua provides a valuable comparison because, unlike English, it is a highly inflected language in which generics are marked by the absence rather than the presence of any linguistic markers. Moreover, Quechua is spoken in a cultural context that differs markedly from the highly educated, middle-class contexts within which earlier research on generics was conducted. We presented participants from 5 age groups (3-6, 7-9, 10-12, 14-35, and 36-90 years of age) with two tasks that examined the ability to distinguish generic from non-generic utterances. In Study 1, even the youngest children understood generics as applying broadly to a category (like "all") and distinct from indefinite reference ("some"). However, there was a developmental lag before children understood that generics, unlike "all", can include exceptions. Study 2 revealed that generic interpretations are more frequent for utterances that (a) lack specifying markers and (b) are animate. Altogether, generic interpretations are found among the youngest participants, and may be a default mode of quantification. These data demonstrate the cross-cultural importance of generic information in linguistic expression.

  3. A developmental analysis of generic nouns in Southern Peruvian Quechua

    PubMed Central

    Mannheim, Bruce; Gelman, Susan A.; Escalante, Carmen; Huayhua, Margarita; Puma, Rosalía

    2010-01-01

    Generic noun phrases (e.g., “Cats like to drink milk”) are a primary means by which adults express generalizations to children, yet they pose a challenging induction puzzle for learners. Although prior research has established that English speakers understand and produce generic noun phrases by preschool age, little is known regarding the cross-cultural generality of generic acquisition. Southern Peruvian Quechua provides a valuable comparison because, unlike English, it is a highly inflected language in which generics are marked by the absence rather than the presence of any linguistic markers. Moreover, Quechua is spoken in a cultural context that differs markedly from the highly educated, middle-class contexts within which earlier research on generics was conducted. We presented participants from 5 age groups (3-6, 7-9, 10-12, 14-35, and 36-90 years of age) with two tasks that examined the ability to distinguish generic from non-generic utterances. In Study 1, even the youngest children understood generics as applying broadly to a category (like “all”) and distinct from indefinite reference (“some”). However, there was a developmental lag before children understood that generics, unlike “all”, can include exceptions. Study 2 revealed that generic interpretations are more frequent for utterances that (a) lack specifying markers and (b) are animate. Altogether, generic interpretations are found among the youngest participants, and may be a default mode of quantification. These data demonstrate the cross-cultural importance of generic information in linguistic expression. PMID:21779154

  4. Comparing Generic Drug Markets in Europe and the United States: Prices, Volumes, and Spending.

    PubMed

    Wouters, Olivier J; Kanavos, Panos G; McKEE, Martin

    2017-09-01

    Policy Points: Our study indicates that there are opportunities for cost savings in generic drug markets in Europe and the United States. Regulators should make it easier for generic drugs to reach the market. Regulators and payers should apply measures to stimulate price competition among generic drugmakers and to increase generic drug use. To meaningfully evaluate policy options, it is important to analyze historical context and understand why similar initiatives failed previously. Rising drug prices are putting pressure on health care budgets. Policymakers are assessing how they can save money through generic drugs. We compared generic drug prices and market shares in 13 European countries, using data from 2013, to assess the amount of variation that exists between countries. To place these results in context, we reviewed evidence from recent studies on the prices and use of generics in Europe and the United States. We also surveyed peer-reviewed studies, gray literature, and books published since 2000 to (1) outline existing generic drug policies in European countries and the United States; (2) identify ways to increase generic drug use and to promote price competition among generic drug companies; and (3) explore barriers to implementing reform of generic drug policies, using a historical example from the United States as a case study. The prices and market shares of generics vary widely across Europe. For example, prices charged by manufacturers in Switzerland are, on average, more than 2.5 times those in Germany and more than 6 times those in the United Kingdom, based on the results of a commonly used price index. The proportion of prescriptions filled with generics ranges from 17% in Switzerland to 83% in the United Kingdom. By comparison, the United States has historically had low generic drug prices and high rates of generic drug use (84% in 2013), but has in recent years experienced sharp price increases for some off-patent products. There are policy solutions to address issues in Europe and the United States, such as streamlining the generic drug approval process and requiring generic prescribing and substitution where such policies are not yet in place. The history of substitution laws in the United States provides insights into the economic, political, and cultural issues influencing the adoption of generic drug policies. Governments should apply coherent supply- and demand-side policies in generic drug markets. An immediate priority is to convince more physicians, pharmacists, and patients that generic drugs are bioequivalent to branded products. Special-interest groups continue to obstruct reform in Europe and the United States. © 2017 The Authors The Milbank Quarterly published by Wiley Periodicals, Inc. on behalf of The Millbank Memorial Fund.

  5. NASA's Role in Aeronautics: A Workshop. Volume 3: Transport aircraft

    NASA Technical Reports Server (NTRS)

    1981-01-01

    Segments of the spectrum of research and development activities that clearly must be within the purview of NASA in order for U.S. transport aircraft manufacturing and operating industries to succeed and to continue to make important contributions to the nation's wellbeing were examined. National facilities and expertise; basic research, and the evolution of generic and vehicle class technologies were determined to be the areas in which NASA has an essential role in transport aircraft aeronautics.

  6. Topology Model of the Flow around a Submarine Hull Form

    DTIC Science & Technology

    2015-12-01

    UNCLASSIFIED Topology Model of the Flow around a Submarine Hull Form S.-K. Lee Maritime Division Defence Science and Technology Group DST-Group–TR...3177 ABSTRACT A topology model constructed from surface-streamer visualisation describes the flow around a generic conventional submarine hull form at...pure yaw angles of 0 ◦, 10 ◦ and 18 ◦. The model is used to develop equations for sway-force and yaw-moment coefficients which relate to the hull - form

  7. Environmental Technology Verification Coatings and Coating Equipment Program (ETV CCEP). High Transfer Efficiency Spray Equipment - Generic Verification Protocol (Revision 0)

    DTIC Science & Technology

    2006-09-30

    High-Pressure Waterjet • CO2 Pellet/Turbine Wheel • Ultrahigh-Pressure Waterjet 5 Process Water Reuse/Recycle • Cross-Flow Microfiltration ...documented on a process or laboratory form. Corrective action will involve taking all necessary steps to restore a measuring system to proper working order...In all cases, a nonconformance will be rectified before sample processing and analysis continues. If corrective action does not restore the

  8. Parts on Demand: Evaluation of Approaches to Achieve Flexible Manufacturing Systems for Navy Partson Demand. Volume 1

    DTIC Science & Technology

    1984-02-01

    measurable impact if changed. The following items were included in the sample: * Mark Zero Items -Low demand insurance items which represent about three...R&D efforts reviewed. The resulting assessment highlighted the generic enabling technologies and cross- cutting R&D projects required to focus current...supplied by spot buys, and which may generate Navy Inventory Control Numbers (NICN). Random samples of data were extracted from the Master Data File ( MDF

  9. CAS -- A Turboprop Solution for the COIN Fight

    DTIC Science & Technology

    2009-04-14

    Civilian Tiltrotor. http://www.bellagusta.com/air ba main.cfm. Accessed 13 Jan 2009. Blake, Brett R , AT-6-The Best Investmentfor the Long War, Air...Counterinsurgency, CRS for Congress RL32737, Washington DC: Congressional Research Service, 24 Jan. 2005. Blake, Brett R Major USAF. AT-6-The Best...www.aviationweek.com/aw/generic/channel .jsp?channel= awst # (accessed 15 Jan 2009). 7 Bolkcom and Katzman, 24. 8 U.S. Congress, Office ofTechnology Assessment, Global

  10. From Domain Specific Languages to DEVS Components: Application to Cognitive M&S

    DTIC Science & Technology

    2011-04-01

    AND SUBTITLE From Domain Specific Languages to DEVS Components: Application to Cognitive M&S 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ...that is devoid of any DEVS and programming language constructs (Figure 4). The key idea being domain specialists need not delve in the DEVS world to...DSL. DSLs can be created using many available tools and technologies such as: Generic Modeling Environment (GME) [23], Xtext, Ruby, Scala and many

  11. An integrated aerodynamic/propulsion study for generic aero-space planes based on waverider concepts

    NASA Technical Reports Server (NTRS)

    Rasmussen, M. L.; Emanuel, George

    1989-01-01

    The design of a unified aero-space plane based on waverider technology is analyzed. The overall aerodynamic design and performance of an aero-space plane are discussed in terms of the forebody, scramjet, and afterbody. Other subjects considered in the study are combustion/nozzle optimization, the idealized tip-to-tail waverider model, and the two-dimensional minimum length nozzle. Charts and graphs are provided to show the results of the preliminary investigations.

  12. Achieving accurate compound concentration in cell-based screening: validation of acoustic droplet ejection technology.

    PubMed

    Grant, Richard John; Roberts, Karen; Pointon, Carly; Hodgson, Clare; Womersley, Lynsey; Jones, Darren Craig; Tang, Eric

    2009-06-01

    Compound handling is a fundamental and critical step in compound screening throughout the drug discovery process. Although most compound-handling processes within compound management facilities use 100% DMSO solvent, conventional methods of manual or robotic liquid-handling systems in screening workflows often perform dilutions in aqueous solutions to maintain solvent tolerance of the biological assay. However, the use of aqueous media in these applications can lead to suboptimal data quality due to compound carryover or precipitation during the dilution steps. In cell-based assays, this effect is worsened by the unpredictable physical characteristics of compounds and the low DMSO tolerance within the assay. In some cases, the conventional approaches using manual or automated liquid handling resulted in variable IC(50) dose responses. This study examines the cause of this variability and evaluates the accuracy of screening data in these case studies. A number of liquid-handling options have been explored to address the issues and establish a generic compound-handling workflow to support cell-based screening across our screening functions. The authors discuss the validation of the Labcyte Echo reformatter as an effective noncontact solution for generic compound-handling applications against diverse compound classes using triple-quad liquid chromatography/mass spectrometry. The successful validation and implementation challenges of this technology for direct dosing onto cells in cell-based screening is discussed.

  13. Design and Performance of a Miniature Radar L-Band Transceiver

    NASA Technical Reports Server (NTRS)

    McWatters, D.; Price, D.; Edelstein, W.

    2004-01-01

    Radar electronics developed for past JPL space missions historically had been custom designed and as such, given budgetary, time, and risk constraints, had not been optimized for maximum flexibility or miniaturization. To help reduce cost and risk of future radar missions, a generic radar module was conceived. The module includes a 1.25-GHz (L-band) transceiver and incorporates miniature high-density packaging of integrated circuits in die/chip form. The technology challenges include overcoming the effect of miniaturization and high packaging density to achieve the performance, reliability, and environmental ruggedness required for space missions. The module was chosen to have representative (generic) functionality most likely required from an L-band radar. For very large aperture phased-array spaceborne radar missions, the large dimensions of the array suggest the benefit of distributing the radar electronics into the antenna array. For such applications, this technology is essential in order to bring down the cost, mass, and power of the radar electronics module replicated in each panel of the array. For smaller sized arrays, a single module can be combined with the central radar controller and still provide the bene.ts of configuration .exibility, low power, and low mass. We present the design approach for the radar electronics module and the test results for its radio frequency (RF) portion: a miniature, low-power, radiation-hard L-band transceiver.

  14. Advanced EVA system design requirements study

    NASA Technical Reports Server (NTRS)

    Woods, T. G.

    1988-01-01

    The results are presented of a study to identify specific criteria regarding space station extravehicular activity system (EVAS) hardware requirements. Key EVA design issues include maintainability, technology readiness, LSS volume vs. EVA time available, suit pressure/cabin pressure relationship and productivity effects, crew autonomy, integration of EVA as a program resource, and standardization of task interfaces. A variety of DOD EVA systems issues were taken into consideration. Recommendations include: (1) crew limitations, not hardware limitations; (2) capability to perform all of 15 generic missions; (3) 90 days on-orbit maintainability with 50 percent duty cycle as minimum; and (4) use by payload sponsors of JSC document 10615A plus a Generic Tool Kit and Specialized Tool Kit description. EVA baseline design requirements and criteria, including requirements of various subsystems, are outlined. Space station/EVA system interface requirements and EVA accommodations are discussed in the areas of atmosphere composition and pressure, communications, data management, logistics, safe haven, SS exterior and interior requirements, and SS airlock.

  15. A Simulation and Modeling Framework for Space Situational Awareness

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Olivier, S S

    This paper describes the development and initial demonstration of a new, integrated modeling and simulation framework, encompassing the space situational awareness enterprise, for quantitatively assessing the benefit of specific sensor systems, technologies and data analysis techniques. The framework is based on a flexible, scalable architecture to enable efficient, physics-based simulation of the current SSA enterprise, and to accommodate future advancements in SSA systems. In particular, the code is designed to take advantage of massively parallel computer systems available, for example, at Lawrence Livermore National Laboratory. The details of the modeling and simulation framework are described, including hydrodynamic models of satellitemore » intercept and debris generation, orbital propagation algorithms, radar cross section calculations, optical brightness calculations, generic radar system models, generic optical system models, specific Space Surveillance Network models, object detection algorithms, orbit determination algorithms, and visualization tools. The use of this integrated simulation and modeling framework on a specific scenario involving space debris is demonstrated.« less

  16. Euler technology assessment for preliminary aircraft design employing OVERFLOW code with multiblock structured-grid method

    NASA Technical Reports Server (NTRS)

    Treiber, David A.; Muilenburg, Dennis A.

    1995-01-01

    The viability of applying a state-of-the-art Euler code to calculate the aerodynamic forces and moments through maximum lift coefficient for a generic sharp-edge configuration is assessed. The OVERFLOW code, a method employing overset (Chimera) grids, was used to conduct mesh refinement studies, a wind-tunnel wall sensitivity study, and a 22-run computational matrix of flow conditions, including sideslip runs and geometry variations. The subject configuration was a generic wing-body-tail geometry with chined forebody, swept wing leading-edge, and deflected part-span leading-edge flap. The analysis showed that the Euler method is adequate for capturing some of the non-linear aerodynamic effects resulting from leading-edge and forebody vortices produced at high angle-of-attack through C(sub Lmax). Computed forces and moments, as well as surface pressures, match well enough useful preliminary design information to be extracted. Vortex burst effects and vortex interactions with the configuration are also investigated.

  17. From LCAs to simplified models: a generic methodology applied to wind power electricity.

    PubMed

    Padey, Pierryves; Girard, Robin; le Boulch, Denis; Blanc, Isabelle

    2013-02-05

    This study presents a generic methodology to produce simplified models able to provide a comprehensive life cycle impact assessment of energy pathways. The methodology relies on the application of global sensitivity analysis to identify key parameters explaining the impact variability of systems over their life cycle. Simplified models are built upon the identification of such key parameters. The methodology is applied to one energy pathway: onshore wind turbines of medium size considering a large sample of possible configurations representative of European conditions. Among several technological, geographical, and methodological parameters, we identified the turbine load factor and the wind turbine lifetime as the most influent parameters. Greenhouse Gas (GHG) performances have been plotted as a function of these key parameters identified. Using these curves, GHG performances of a specific wind turbine can be estimated, thus avoiding the undertaking of an extensive Life Cycle Assessment (LCA). This methodology should be useful for decisions makers, providing them a robust but simple support tool for assessing the environmental performance of energy systems.

  18. Generic protease detection technology for monitoring periodontal disease.

    PubMed

    Zheng, Xinwei; Cook, Joseph P; Watkinson, Michael; Yang, Shoufeng; Douglas, Ian; Rawlinson, Andrew; Krause, Steffi

    2011-01-01

    Periodontal diseases are inflammatory conditions that affect the supporting tissues of teeth and can lead to destruction of the bone support and ultimately tooth loss if untreated. Progression of periodontitis is usually site specific but not uniform, and currently there are no accurate clinical methods for distinguishing sites where there is active disease progression from sites that are quiescent. Consequently, unnecessary and costly treatment of periodontal sites that are not progressing may occur. Three proteases have been identified as suitable markers for distinguishing sites with active disease progression and quiescent sites: human neutrophil elastase, cathepsin G and MMP8. Generic sensor materials for the detection of these three proteases have been developed based on thin dextran hydrogel films cross-linked with peptides. Degradation of the hydrogel films was monitored using impedance measurements. The target proteases were detected in the clinically relevant range within a time frame of 3 min. Good specificity for different proteases was achieved by choosing appropriate peptide cross-linkers.

  19. Patient, physician, pharmacy, and pharmacy benefit design factors related to generic medication use.

    PubMed

    Shrank, William H; Stedman, Margaret; Ettner, Susan L; DeLapp, Dee; Dirstine, June; Brookhart, M Alan; Fischer, Michael A; Avorn, Jerry; Asch, Steven M

    2007-09-01

    Increased use of generic medications conserves insurer and patient financial resources and may increase patient adherence. The objective of the study is to evaluate whether physician, patient, pharmacy benefit design, or pharmacy characteristics influence the likelihood that patients will use generic drugs Observational analysis of 2001-2003 pharmacy claims from a large health plan in the Western United States. We evaluated claims for 5,399 patients who filled a new prescription in at least 1 of 5 classes of chronic medications with generic alternatives. We identified patients initiated on generic drugs and those started on branded medications who switched to generic drugs in the subsequent year. We used generalized estimating equations to perform separate analyses assessing the relationship between independent variables and the probability that patients were initiated on or switched to generic drugs. Of the 5,399 new prescriptions filled, 1,262 (23.4%) were generics. Of those initiated on branded medications, 606 (14.9%) switched to a generic drug in the same class in the subsequent year. After regression adjustment, patients residing in high-income zip codes were more likely to initiate treatment with a generic than patients in low-income regions (RR = 1.29; 95% C.I. 1.04-1.60); medical subspecialists (RR = 0.82; 0.69-0.95) and obstetrician/gynecologists (RR = 0.81; 0.69-0.98) were less likely than generalist physicians to initiate generics. Pharmacy benefit design and pharmacy type were not associated with initiation of generic medications. However, patients were over 2.5 times more likely to switch from branded to generic medications if they were enrolled in 3-tier pharmacy plans (95% C.I. 1.12-6.09), and patients who used mail-order pharmacies were 60% more likely to switch to a generic (95% C.I. 1.18-2.30) after initiating treatment with a branded drug. Physician and patient factors have an important influence on generic drug initiation, with the patients who live in the poorest zip codes paradoxically receiving generic drugs least often. While tiered pharmacy benefit designs and mail-order pharmacies helped steer patients towards generic medications once the first prescription has been filled, they had little effect on initial prescriptions. Providing patients and physicians with information about generic alternatives may reduce costs and lead to more equitable care.

  20. An evaluation of consumers' knowledge, perceptions and attitudes regarding generic medicines in Auckland.

    PubMed

    Babar, Zaheer-Ud-Din; Stewart, Joanna; Reddy, Shiwangni; Alzaher, Woroud; Vareed, Prateeka; Yacoub, Nineweh; Dhroptee, Bandhana; Rew, Anne

    2010-08-01

    The aim of this project was to evaluate the perceptions, knowledge and attitudes regarding generic medicines. A cross-sectional study, with self administered questionnaires, was conducted to survey consumers visiting pharmacies in four regions of Auckland (North Shore, Waitakere, Central Auckland and South Auckland). Through stratified random sampling, approximately 10% of pharmacies from each region were selected, which turn out to be 30 pharmacies. Every alternate customer coming to the pharmacy, who was eligible to participate in the study, was asked by the researchers to complete the questionnaire. A total of 441 questionnaires were included in the analysis. Different response rates were obtained in different regions of Auckland. Of all respondents, 51.6% had previous knowledge of generic medicines. Pharmacists were the main source of information regarding generic medicines followed by doctors and media. A higher level of education had a direct relationship with having correct knowledge of generics (P = .002). Attitude of participants toward the use of generic medicines was determined by their knowledge of generics, whether it was recommended by a pharmacist and their type of illness. Participants were more prepared to change to a generic for a minor illness (79%) than for a major illness (58.7%). Those who had better knowledge were more likely than those with poor knowledge to say they would to use a generic in major illness (P = .001) as well as minor illness (P < .0001). Previous positive experiences with generics also determined consumers' willingness to use generics. Many consumers have misconceptions regarding generic medicines. Having knowledge about generics and the advice by doctors and pharmacists are key indicators to improve the quality use of generic medicines.

  1. Societal value of generic medicines beyond cost-saving through reduced prices.

    PubMed

    Dylst, Pieter; Vulto, Arnold; Simoens, Steven

    2015-01-01

    This paper aims to provide an overview of the added societal value of generic medicines beyond their cost-saving potential through reduced prices. In addition, an observational case study will document the impact of generic entry on access to pharmacotherapy in The Netherlands and an illustrative exercise was carried out to highlight the budget impact of generic entry. A narrative literature review was carried out to explore the impact of generic medicines on access to pharmacotherapy, innovation and medication adherence. Data from the Medicines and Medical Devices Information Project database in The Netherlands were used for the case study in which the impact of generic medicine entrance on the budget and the number of users was calculated as an illustrative exercise. Generic medicines have an additional societal value beyond their cost-saving potential through reduced prices. Generic medicines increase access to pharmacotherapy, provide a stimulus for innovation by both originator companies and generic companies and, under the right circumstances, have a positive impact on medication adherence. Generic medicines offer more to society than just their cost-saving potential through reduced prices. As such, governments must not focus only on the prices of generic medicines as this will threaten their long-term sustainability. Governments must therefore act appropriately and implement a coherent set of policies to increase the use of generic medicines.

  2. A survey to determine the views of renal transplant patients on generic substitution in the UK.

    PubMed

    Al Ameri, Mubarak N; Whittaker, Clare; Tucker, Arthur; Yaqoob, Magdi; Johnston, Atholl

    2011-08-01

    Rising healthcare costs promote the generic substitution among patients because it is identifiable costs. A key concern is that patients should be involved in the decision of switching. The aim of this study was to examine renal transplant patients' views on generic substitution in the UK. A total of 163 renal patients were surveyed using 36 multiple-choice questions at Barts and The London Renal Transplant Clinic, in the UK. Transplant recipients over 18 years, able to read and write English and willing to fill in the questionnaire were targeted; 84% of patients were conscious of the availability of generic medicines, 70% understood the terms "generic" and "branded" in relation to medicines and 54% were aware of generic substitution practice. However, 75% did not know if they were taking generics and 84% felt that generics are not equivalent or only equivalent sometimes and they were uncertain that generics had the same quality as branded medicines. Moreover, many patients admitted that they would not accept the generic substitution of ciclosporin when become available in the UK. A number of factors such as patients' education, knowledge, severity of the disease, efficacy of generic medicines and patients' involvement in decisions regarding their health appear to drive patients' attitudes towards generic substitution. © 2011 The Authors. Transplant International © 2011 European Society for Organ Transplantation.

  3. Generic drug prices and policy in Australia: room for improvement? a comparative analysis with England.

    PubMed

    Mansfield, Sarah J

    2014-02-01

    To assess the degree to which reimbursement prices in Australia and England differ for a range of generic drugs, and to analyse the supply- and demand-side factors that may contribute to these differences. Australian and English reimbursement prices were compared for a range of generic drugs using pricing information obtained from government websites. Next, a literature review was conducted to identify supply- and demand-side factors that could affect generic prices in Australia and England. Various search topics were identified addressing potential supply-side (e.g. market approval, intellectual property protection of patented drugs, generic pricing policy, market size, generic supply chain and discounting practices) and demand-side (consumers, prescribers and pharmacists) factors. Related terms were searched in academic databases, official government websites, national statistical databases and internet search engines. Analysis of drug reimbursement prices for 15 generic molecules (representing 45 different drug presentations) demonstrated that Australian prices were on average over 7-fold higher than in England. Significant supply-side differences included aspects of pricing policy, the relative size of the generics markets and the use of clawback policies. Major differences in demand-side policies related to generic prescribing, pharmacist substitution and consumer incentives. Despite recent reforms, the Australian Government continues to pay higher prices than its English counterpart for many generic medications. The results suggest that particular policy areas may benefit from review in Australia, including the length of the price-setting process, the frequency of subsequent price adjustments, the extent of price competition between originators and generics, medical professionals' knowledge about generic medicines and incentives for generic prescribing. WHAT IS KNOWN ABOUT THE TOPIC? Prices of generic drugs have been the subject of much scrutiny over recent years. From 2005 to 2010 the Australian Government responded to observations that Pharmaceutical Benefits Scheme prices for many generics were higher than in numerous comparable countries by instituting several reforms aimed at reducing the prices of generics. Despite this, several studies have demonstrated that prices for generic statins (one class of cholesterol-lowering drug) are higher in Australia compared with England and many other developed countries, and prices of numerous other generics remain higher than in the USA and New Zealand. Recently there has been increasing interest in why these differences exist. WHAT DOES THIS PAPER ADD? By including a much larger range of commonly used and costly generic drugs, this paper builds significantly on the limited previous investigations of generic drug prices in Australia and England. Additionally, this is the first comprehensive investigation of multiple supply- and, in particular, demand-side factors that may explain any price differences between these countries. WHAT ARE THE IMPLICATIONS FOR PRACTITIONERS? Practitioners may contribute to the higher prices of generic medications in Australia compared with England through relatively low rates of generic prescribing. There are also significant implications for health policy makers, as this paper demonstrates that if Australia achieved the same prices as England for many generic drugs there could be substantial savings for the Pharmaceutical Benefits Scheme.

  4. A Cross-Linguistic Comparison of Generic Noun Phrases in English and Mandarin.

    ERIC Educational Resources Information Center

    Gelman, Susan A.; Tardif, Twila

    1998-01-01

    Three studies examined adults' generic noun phrases in English and Mandarin Chinese from child-directed speech of caregivers interacting with their toddlers. Found that generic noun phrases were reliably identified in both languages. Generic noun phrases most frequently referred to animals. Non-generic noun phrases were used most frequently for…

  5. Generic Language and Judgements about Category Membership: Can Generics Highlight Properties as Central?

    ERIC Educational Resources Information Center

    Hollander, Michelle A.; Gelman, Susan A.; Raman, Lakshmi

    2009-01-01

    Many languages distinguish generic utterances (e.g., "Tigers are ferocious") from non-generic utterances (e.g., "Those tigers are ferocious"). Two studies examined how generic language specially links properties and categories. We used a novel-word extension task to ask if 4- to 5-year-old children and adults distinguish…

  6. On assessing bioequivalence and interchangeability between generics based on indirect comparisons.

    PubMed

    Zheng, Jiayin; Chow, Shein-Chung; Yuan, Mengdie

    2017-08-30

    As more and more generics become available in the market place, the safety/efficacy concerns may arise as the result of interchangeably use of approved generics. However, bioequivalence assessment for regulatory approval among generics of the innovative drug product is not required. In practice, approved generics are often used interchangeably without any mechanism of safety monitoring. In this article, based on indirect comparisons, we proposed several methods to assessing bioequivalence and interchangeability between generics. The applicability of the methods and the similarity assumptions were discussed, as well as the inappropriateness of directly adopting adjusted indirect comparison to the field of generics' comparison. Besides, some extensions were given to take into consideration the important topics in clinical trials for bioequivalence assessments, for example, multiple comparisons and simultaneously testing bioequivalence among three generics. Extensive simulation studies were conducted to investigate the performances of the proposed methods. The studies of malaria generics and HIV/AIDS generics prequalified by the WHO were used as real examples to demonstrate the use of the methods. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  7. Acquisition of Generic Noun Phrases in Chinese: Learning about lions without an ‘-s’

    PubMed Central

    Tardif, Twila; Gelman, Susan A.; Fu, Xiaolan; Zhu, Liqi

    2013-01-01

    English-speaking children understand and produce generic expressions in the preschool years, but there are cross-linguistic differences in how generics are expressed. Three studies examined interpretation of generic noun phrases in 3- to 7-year-old child (N = 192) and adult speakers (N = 163) of Mandarin Chinese. Contrary to suggestions by A. Bloom (1981), Chinese-speaking adults honor a clear distinction between generics (expressed as bare NPs) and other quantified expressions (‘all’/suo3you3 and ‘some’/you3de). Furthermore, Mandarin-speaking children begin to distinguish generics from ‘all’ or ‘some’ as early as 5 years, as shown in both confirmation (Study 2) and property-generation (Study 3) tasks. Nonetheless, the developmental trajectory for Chinese appears prolonged relative to English and this seems to reflect difficulty with ‘all’ and ‘some’ rather than difficulty with generics. Altogether these results suggest that generics are primary, and that the consistency of markings affects the rate at which non-generic NPs are distinguished from generics. PMID:21849102

  8. Does the market share of generic medicines influence the price level?: a European analysis.

    PubMed

    Dylst, Pieter; Simoens, Steven

    2011-10-01

    After the expiry of patents for originator medicines, generic medicines can enter the market, and price competition may occur. This process generates savings to the healthcare payer and to patients, but knowledge about the factors affecting price competition in the pharmaceutical market following patent expiry is still limited. This study aimed to investigate the relationship between the market share of generic medicines and the change of the medicine price level in European off-patent markets. Data on medicine volumes and values for 35 active substances were purchased from IMS Health. Ex-manufacturer prices were used, and the analysis was limited to medicines in immediate-release, oral, solid dosage forms. Countries included were Austria, Belgium, Denmark, Germany, France, Italy, the Netherlands, Spain, Sweden and the UK, which constitute a mix of countries with low and high generic medicines market shares. Data were available from June 2002 until March 2007. Market volume has risen in both high and low generic market share countries (+29.27% and +27.40%, respectively), but the cause of the rise is different for the two markets. In low generic market share countries, the rise was caused by the increased use of generic medicines, while in high market share countries, the rise was driven by the increased use of generic medicines and a shift of use from originator to generic medicines. Market value was substantially decreased in high generic market share countries (-26.6%), while the decrease in low generic market share countries was limited (-0.06%). In high generic market share countries, medicine prices dropped by -43.18% versus -21.56% in low market share countries. The extent to which price competition from generic medicines leads to price reductions appears to vary according to the market share of generic medicines. High generic market share countries have seen a larger decrease in medicine prices than low market share countries.

  9. Economic savings versus health losses: The cost-effectiveness of generic antiretroviral therapy in the United States

    PubMed Central

    Walensky, Rochelle P.; Sax, Paul E.; Nakamura, Yoriko M.; Weinstein, Milton C.; Pei, Pamela P.; Freedberg, Kenneth A.; Paltiel, A. David; Schackman, Bruce R.

    2013-01-01

    Background US HIV treatment guidelines recommend branded once-daily, one-pill efavirenz/emtricitabine/tenofovir as preferred first-line antiretroviral treatment (ART). With the anticipated approval of generic efavirenz in 2012 in the US, the cost of a once-daily, three-pill alternative (generic efavirenz, generic lamivudine, tenofovir) will decrease, but adherence and virologic suppression may be reduced. Objectives To assess the clinical impact, costs, and cost-effectiveness of the generic-based three-pill regimen compared to the branded, co-formulated regimen. To project the potential national savings in the first year of a switch to generic-based ART. Design Mathematical simulation of HIV disease. Data Sources Published data from US clinical trials and observational cohorts. Target Population HIV-infected patients eligible to start on or switch to an efavirenz-based generic ART regimen. Time Horizon Lifetime, One-year Perspective US health system Interventions No ART (for comparison), Three-pill Generic ART, and Branded ART Outcome Measures Quality-adjusted life expectancy, costs, and incremental cost-effectiveness ratios (ICER, $/quality-adjusted life expectancy [QALY]). Results of Base-Case Analysis Compared to No ART, Generic ART has an ICER of $21,100/QALY. Compared to Generic ART, Branded ART increases lifetime costs by $42,500, and per-person survival gains by 0.37 QALYs, for an ICER of $114,800/QALY. Estimated first-year savings, if all eligible US patients start on or switch to Generic ART, are $920 million. Results of Sensitivity Analysis Most plausible assumptions about Generic ART efficacy and costs lead to Branded ART ICERs >$100,000/QALY. Limitations The efficacy and price reduction associated with generics are unknown; estimates are intended to be conservative. Conclusions Compared to a slightly less effective generic-based regimen, the cost-effectiveness of first-line Branded ART exceeds $100,000/QALY. Generic-based ART in the US could yield substantial budgetary savings to HIV programs. PMID:23318310

  10. Physicians' Trust in the FDA's Use of Product-Specific Pathways for Generic Drug Approval.

    PubMed

    Kesselheim, Aaron S; Eddings, Wesley; Raj, Tara; Campbell, Eric G; Franklin, Jessica M; Ross, Kathryn M; Fulchino, Lisa A; Avorn, Jerry; Gagne, Joshua J

    2016-01-01

    Generic drugs are cost-effective versions of brand-name drugs approved by the Food and Drug Administration (FDA) following proof of pharmaceutical equivalence and bioequivalence. Generic drugs are widely prescribed by physicians, although there is disagreement over the clinical comparability of generic drugs to brand-name drugs within the physician community. The objective of this survey was to assess physicians' perceptions of generic drugs and the generic drug approval process. A survey was administered to a national sample of primary care internists and specialists between August 2014 and January 2015. In total, 1,152 physicians comprising of internists with no reported specialty certification and those with specialty certification in hematology, infectious diseases, and endocrinology were surveyed. The survey assessed physicians' perceptions of the FDA's generic drug approval process, as well as their experiences prescribing six generic drugs approved between 2008 and 2012 using product-specific approval pathways and selected comparator drugs. Among 718 respondents (62% response rate), a majority were comfortable with the FDA's process in ensuring the safety and effectiveness of generic drugs overall (91%) and with letting the FDA determine which tests were necessary to determine bioequivalence in a particular drug (92%). A minority (13-26%) still reported being uncomfortable prescribing generic drugs approved using product-specific pathways. Overall, few physicians heard reports of concerns about generic versions of the study drugs or their comparators, with no differences between the two groups. Physicians tended to hear about concerns about the safety or effectiveness of generic drugs from patients, pharmacists, and physician colleagues. Physicians hold largely positive views of the FDA's generic drug approval process even when some questioned the performance of certain generic drugs in comparison to brand-name drugs. Better education about the generic drug approval process and standards may alleviate concerns among the physician community and support the delivery of cost-effective health care.

  11. [It is not only about cost ... when it comes to generic medication].

    PubMed

    Piguet, Valérie; D'Incau, Stéphanie; Besson, Marie; Desmeules, Jules; Cedraschi, Christine

    2016-06-22

    The aim of this qualitative study was to explore patients' representations regarding generics in patients suffering from non-specific disabling chronic musculoskeletal pain, as these patients are confronted with the issue of the prescription and/or substitution of original formulations with generics. Patients' representations suggest that they might be confident in taking a generic medication: when the generic medication is prescribed by the physician and each prescription is discussed, i.e., the patient is prescribed the generic version of a given medication and not a generic medication. Economic arguments are not sufficient to accept substitution. Negative representations require attention and need be considered.

  12. Generic medications for you, but brand-name medications for me.

    PubMed

    Keenum, Amy J; Devoe, Jennifer E; Chisolm, Deena J; Wallace, Lorraine S

    2012-01-01

    Because generic medications are less expensive than brand-name medications, government and private insurers have encouraged and/or mandated the use of generics. This study aimed at evaluating perceptions about generic medications among English-speaking women of childbearing age currently enrolled in U.S. TennCare (Medicaid). We recruited a convenience sample of patients from the waiting room of a primary care/gynecology health clinic, with 80% recruitment rate among those approached. We orally administered a 25-item questionnaire to gather sociodemographic information and to assess beliefs regarding the efficacy, safety, cost, and preferences for personal use of generic medications. The average age of the women (n=172) was 28.8 ± 6.4 years, and most were white (82.0%) and currently married (58.1%). Nearly one-fifth (19.2%) had not completed high school. Most women believed that generic medications were less expensive (97.6%) and better value (60.5%) than brand-name medications, but only 45.3% preferred to take generics themselves. About a quarter (23.3%) believed that brand-name medications were more effective than generics, whereas 13.4% believed that generics caused more side effects. Few women reported that their doctor (29.7%) and/or pharmacist (35.5%) had ever talked to them about taking generics. Awareness of the benefits of generics did not equal preferences for personal use of generics among this sample of women enrolled in U.S. TennCare. Furthermore, women reported that providers-both physicians and pharmacists-infrequently discussed generic substitution with them. Copyright © 2012 Elsevier Inc. All rights reserved.

  13. Factors influencing the preference for purchasing generic drugs in a Southern Brazilian city.

    PubMed

    Guttier, Marília Cruz; Silveira, Marysabel Pinto Telis; Luiza, Vera Lucia; Bertoldi, Andréa Dâmaso

    2017-06-26

    The objective of this study is to identify factors associated with the preference for purchasing generic drugs in a medium-sized municipality in Southern Brazil. We have analyzed data from a population-based cross-sectional study conducted in 2012 with a sample of 2,856 adults (≥ 20 years old). The preference for purchasing generic drugs was the main outcome. The explanatory variables were the demographic and socioeconomic variables. Statistical analyses included Poisson regressions. The preference for purchasing generic drugs was 63.2% (95%CI 61.4-64.9). The variables correlated with this preference in the fully adjusted models were: male (prevalence ratio [PR] = 1.08; 95%CI 1.03-1.14), age of 20-39 years (PR = 1.10; 95%CI 1.02-1.20), low socioeconomic status (PR = 1.15; 95%CI 1.03-1.28), and good knowledge about generic drugs (PR= 4.66; 95%CI 2.89-7.52). Among those who preferred to purchase generic drugs, 55.1% have reported accepting to replace the prescribed drug (if not a generic) with the equivalent generic drug. Another correlate of the preference for purchasing generic drugs was because individuals consider their quality equivalent to reference medicines (PR = 2.15; 95%CI 1.93-2.41). Knowledge about generic drugs was the main correlate of the preference for purchasing generic drugs. The greater the knowledge or positive perception about generic drugs, the greater is the preference to purchase them. Therefore, educational campaigns for healthcare professionals and consumers appear to be the best strategy for expanding the use of generic drugs in Brazil.

  14. Files in /noaa/dhs

    Science.gov Websites

    noaa_20110510_wbg.gif 10-May-2011 20:58 31K generic file noaa_20110510_wbg.pdf 10-May-2011 20:58 128K generic file noaa_20110513_wbg.gif 13-May-2011 20:10 27K generic file noaa_20110513_wbg.pdf 13-May-2011 20:10 122K generic file noaa_20110518_wbg.gif 18-May-2011 21:10 33K generic file noaa_20110518_wbg.pdf 18-May-2011 21:10 128K generic file

  15. The differences between the branded and generic medicines using solid dosage forms: In-vitro dissolution testing

    PubMed Central

    Al Ameri, Mubarak Nasser; Nayuni, Nanda; Anil Kumar, K.G.; Perrett, David; Tucker, Arthur; Johnston, Atholl

    2011-01-01

    Introduction Dissolution is the amount of substance that goes into solution per unit time under standardised conditions of liquid/solid interface, solvent composition and temperature. Dissolution is one of the most important tools to predict the in-vivo bioavailability and in some cases to determine bioequivalence and assure interchangeability. Aim To compare the differences in dissolution behaviour of solid dosage forms between innovators (reference products) and their generic counterparts (tested products). Methods Four replicates for each batch of 37 tested medicines was carried out using A PT-DT70 dissolution tester from Pharma Test. A total of 13 branded medicines and 24 generic counterparts were obtained locally and internationally to detect any differences in their dissolution behaviour. They were tested according to the British Pharmacopeia, European Pharmacopeia and the US Pharmacopeia with the rate of dissolution determined by ultra-violet Spectrophotometery. Results Most tested medicines complied with the pharmacopoeial specifications and achieved 85% dissolution in 60 min. However, some generic medicines showed significant differences in dissolution rate at 60 and 120 min. Many generic medicines showed a slower dissolution rate than their branded counterparts such as the generic forms of omeprazole 20 mg. Some showed an incomplete dissolution such as the generic form of nifedipine 10 mg. Other generics showed faster dissolution rate than their branded counterpart such as the generic forms of meloxicam 15 mg. Moreover, some generics from different batches of the same manufacturer showed significant differences in their dissolution rate such as the generic forms of meloxicam 7.5 mg. Nevertheless, some generic medicines violated the EMA and the FDA guidelines for industry when they failed to achieve 85% dissolution at 60 min, such as the generic form of diclofenac sodium 50 mg. Conclusion Most medicines in this study complied with the pharmacopeial limits. However, some generics dissolved differently than their branded counterparts. This can clearly question the interchangeability between the branded and its generic counterpart or even among generics. PMID:25755988

  16. Manufacturing Cost Levelization Model – A User’s Guide

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Morrow, William R.; Shehabi, Arman; Smith, Sarah Josephine

    The Manufacturing Cost Levelization Model is a cost-performance techno-economic model that estimates total large-scale manufacturing costs for necessary to produce a given product. It is designed to provide production cost estimates for technology researchers to help guide technology research and development towards an eventual cost-effective product. The model presented in this user’s guide is generic and can be tailored to the manufacturing of any product, including the generation of electricity (as a product). This flexibility, however, requires the user to develop the processes and process efficiencies that represents a full-scale manufacturing facility. The generic model is comprised of several modulesmore » that estimate variable costs (material, labor, and operating), fixed costs (capital & maintenance), financing structures (debt and equity financing), and tax implications (taxable income after equipment and building depreciation, debt interest payments, and expenses) of a notional manufacturing plant. A cash-flow method is used to estimate a selling price necessary for the manufacturing plant to recover its total cost of production. A levelized unit sales price ($ per unit of product) is determined by dividing the net-present value of the manufacturing plant’s expenses ($) by the net present value of its product output. A user defined production schedule drives the cash-flow method that determines the levelized unit price. In addition, an analyst can increase the levelized unit price to include a gross profit margin to estimate a product sales price. This model allows an analyst to understand the effect that any input variables could have on the cost of manufacturing a product. In addition, the tool is able to perform sensitivity analysis, which can be used to identify the key variables and assumptions that have the greatest influence on the levelized costs. This component is intended to help technology researchers focus their research attention on tasks that offer the greatest opportunities for cost reduction early in the research and development stages of technology invention.« less

  17. Transformation of standardized clinical models based on OWL technologies: from CEM to OpenEHR archetypes.

    PubMed

    Legaz-García, María del Carmen; Menárguez-Tortosa, Marcos; Fernández-Breis, Jesualdo Tomás; Chute, Christopher G; Tao, Cui

    2015-05-01

    The semantic interoperability of electronic healthcare records (EHRs) systems is a major challenge in the medical informatics area. International initiatives pursue the use of semantically interoperable clinical models, and ontologies have frequently been used in semantic interoperability efforts. The objective of this paper is to propose a generic, ontology-based, flexible approach for supporting the automatic transformation of clinical models, which is illustrated for the transformation of Clinical Element Models (CEMs) into openEHR archetypes. Our transformation method exploits the fact that the information models of the most relevant EHR specifications are available in the Web Ontology Language (OWL). The transformation approach is based on defining mappings between those ontological structures. We propose a way in which CEM entities can be transformed into openEHR by using transformation templates and OWL as common representation formalism. The transformation architecture exploits the reasoning and inferencing capabilities of OWL technologies. We have devised a generic, flexible approach for the transformation of clinical models, implemented for the unidirectional transformation from CEM to openEHR, a series of reusable transformation templates, a proof-of-concept implementation, and a set of openEHR archetypes that validate the methodological approach. We have been able to transform CEM into archetypes in an automatic, flexible, reusable transformation approach that could be extended to other clinical model specifications. We exploit the potential of OWL technologies for supporting the transformation process. We believe that our approach could be useful for international efforts in the area of semantic interoperability of EHR systems. © The Author 2015. Published by Oxford University Press on behalf of the American Medical Informatics Association. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Incorporating tailored interactive patient solutions using interactive voice response technology to improve statin adherence: results of a randomized clinical trial in a managed care setting.

    PubMed

    Stacy, Jane N; Schwartz, Steven M; Ershoff, Daniel; Shreve, Marilyn Standifer

    2009-10-01

    The current study presents the impact of a behavior change program to increase statin adherence using interactive voice response (IVR) technology. Subjects were affiliated with a large health benefit company, were prescribed a statin (index) and had no lipid-lowering pharmacy claims in the previous 6 months, and were continuously enrolled in the plan for 12 months prior and 6 months post index statin. Potential subjects (1219) were contacted by the IVR system; 497 gave informed consent. Subjects were asked to respond to 15 questions from the IVR that were guided by several behavior change theories. At the conclusion of the questions, subjects were randomly assigned to either a control group (n = 244), who received generic feedback at the conclusion of the call and were then mailed a generic cholesterol guide, or an experimental group (n = 253), who received tailored feedback based on their cholesterol-related knowledge, attitudes, beliefs, and perceived barriers to medication adherence, and were mailed a tailored guide that reinforced similar themes. Subjects in the experimental group had the opportunity to participate in 2 additional tailored IVR support calls. The primary dependent variable was 6-month point prevalence, defined as claims evidence of a statin on days 121-180 post index statin. Subjects in the experimental group had a significantly higher 6-month point prevalence than the controls (70.4% vs. 60.7%, P < 0.05). Results of this study suggest that a behavioral support program using IVR technology can be a cost-effective modality to address the important public health problem of patient nonadherence with statin medication.

  19. Concepts and Technologies for a Comprehensive Information System for Historical Research and Heritage Documentation

    NASA Astrophysics Data System (ADS)

    Henze, F.; Magdalinski, N.; Schwarzbach, F.; Schulze, A.; Gerth, Ph.; Schäfer, F.

    2013-07-01

    Information systems play an important role in historical research as well as in heritage documentation. As part of a joint research project of the German Archaeological Institute, the Brandenburg University of Technology Cottbus and the Dresden University of Applied Sciences a web-based documentation system is currently being developed, which can easily be adapted to the needs of different projects with individual scientific concepts, methods and questions. Based on open source and standardized technologies it will focus on open and well-documented interfaces to ease the dissemination and re-use of its content via web-services and to communicate with desktop applications for further evaluation and analysis. Core of the system is a generic data model that represents a wide range of topics and methods of archaeological work. By the provision of a concerted amount of initial themes and attributes a cross project analysis of research data will be possible. The development of enhanced search and retrieval functionalities will simplify the processing and handling of large heterogeneous data sets. To achieve a high degree of interoperability with existing external data, systems and applications, standardized interfaces will be integrated. The analysis of spatial data shall be possible through the integration of web-based GIS functions. As an extension to this, customized functions for storage, processing and provision of 3D geo data are being developed. As part of the contribution system requirements and concepts will be presented and discussed. A particular focus will be on introducing the generic data model and the derived database schema. The research work on enhanced search and retrieval capabilities will be illustrated by prototypical developments, as well as concepts and first implementations for an integrated 2D/3D Web-GIS.

  20. Is bioavailability altered in generic versus brand anticonvulsants?

    PubMed

    Jankovic, Slobodan M; Ignjatovic Ristic, Dragana

    2015-03-01

    Therapeutic window of anticonvulsants is not a wide one, with phenytoin being one extreme, which can be classified as a narrow therapeutic index drug, since its ratio between the least toxic and the least effective concentration is less than twofold. In order to obtain marketing authorization, a generic anticonvulsant should demonstrate relative bioequivalence with its brand-name counterpart. However, although bioequivalent, generic anticonvulsants still do not have the same bioavailability as brand-name drugs, which may lead to larger fluctuations of steady-state plasma concentrations, and sometimes to loss of seizure control if a patient is switched from brand-name to generic or from generic to generic anticonvulsant. Generic anticonvulsants are effective, safe and affordable drugs for treatment of epilepsy, and patients could be successfully treated with them from the very beginning. It is switching from brand-name to generic anticonvulsant or from one generic anticonvulsant to another that should be avoided in clinical practice, since subtle differences in bioavailability may disturb optimal degree of seizure control to which the patient was previously successfully titrated.

  1. Generic medicines: solutions for a sustainable drug market?

    PubMed

    Dylst, Pieter; Vulto, Arnold; Godman, Brian; Simoens, Steven

    2013-10-01

    Generic medicines offer equally high-quality treatment as originator medicines do at much lower prices. As such, they represent a considerable opportunity for authorities to obtain substantial savings. At the moment, the pharmaceutical landscape is changing and many pharmaceutical companies have altered their development and commercial strategies, combining both originator and generic divisions. In spite of this, the generic medicines industry is currently facing a number of challenges: delayed market access; the limited price differential with originator medicines; the continuous downwards pressure on prices; and the negative perception regarding generic medicines held by some key stakeholder groups. This could jeopardize the long-term sustainability of the generic manufacturing industry. Therefore, governments must focus on demand-side policies, alongside policies to accelerate market access, as the generic medicines industry will only be able to deliver competitive and sustainable prices if they are ensured a high volume. In the future, the generic medicines industry will increasingly look to biosimilars and generic versions of orphan drugs to expand their business.

  2. Analysis of the Italian generic medicines retail market: recommendations to enhance long-term sustainability.

    PubMed

    Dylst, Pieter; Vulto, Arnold; Simoens, Steven

    2015-02-01

    Italy is among the European countries with the lowest uptake of generic medicines. This paper provides a perspective on the Italian generic medicines retail market. Fast market entrance of generic medicines in Italy is hindered by several factors: the existence of Complementary Protection Certificates in the past, the large market for copies and multiple cases of patent linkage. Prices of generic medicines in Italy are low compared to other European countries. To contain pharmaceutical expenditure, pharmaceutical companies are currently forced to pay back in case of overspending, which disproportionally penalizes small and fast growing companies, to which most generic companies belong to. Current demand-side policies do not successfully stimulate the use of generic medicines. The current market environment surrounding the Italian generic medicines retail market (i.e., low prices, low volumes) threatens its long-term sustainability. Recommendations to enhance the long-term sustainability of the Italian generic medicines retail market round off this perspective paper.

  3. Impact of Radiation Hardness and Operating Temperatures of Silicon Carbide Electronics on Space Power System Mass

    NASA Technical Reports Server (NTRS)

    Juhasz, Albert J.; Tew, Roy C.; Schwarze, Gene E.

    1998-01-01

    The effect of silicon carbide (SiC) electronics operating temperatures on Power Management and Distribution (PMAD), or Power Conditioning (PC), subsystem radiator size and mass requirements was evaluated for three power output levels (100 kW(e) , 1 MW(e), and 10 MW(e)) for near term technology ( i.e. 1500 K turbine inlet temperature) Closed Cycle Gas Turbine (CCGT) power systems with a High Temperature Gas Reactor (HTGR) heat source. The study was conducted for assumed PC radiator temperatures ranging from 370 to 845 K and for three scenarios of electrical energy to heat conversion levels which needed to be rejected to space by means of the PC radiator. In addition, during part of the study the radiation hardness of the PC electronics was varied at a fixed separation distance to estimate its effect on the mass of the instrument rated reactor shadow shield. With both the PC radiator and the conical shadow shield representing major components of the overall power system the influence of the above on total power system mass was also determined. As expected, results show that the greatest actual mass savings achieved by the use of SiC electronics occur with high capacity power systems. Moreover, raising the PC radiator temperature above 600 K yields only small additional system mass savings. The effect of increased radiation hardness on total system mass is to reduce system mass by virtue of lowering the shield mass.

  4. Patients' perceptions of generic drugs in Greece.

    PubMed

    Skaltsas, Leonora N; Vasileiou, Konstantinos Z

    2015-11-01

    The use of generic drugs is growing increasingly around the world and in Greece, in particular, in order to reduce pharmaceutical expenditure. However, patients' perceptions and attitudes about generics have only partially been studied so far in Greece. This study aimed to examine the factors that influence the attitude of patients and consumers regarding generic drugs. A questionnaire survey of 364 patients visiting a pharmacy was conducted. The questionnaire consisted of 29 questions, including questions regarding their knowledge about generics, the reasons for using them, their previous experience, their willingness for generic substitution, and the factors behind these choices. Nearly half of the participants in the survey know the term 'generic' and that it has a lower price compared to the brand name drug. Their views on safety and efficacy vary significantly and the main source of information on generics is the media and the internet. The lack of knowledge is the main barrier for attitudes of doctors. Health professionals play the most influential role for the substitution of a branded drug by a generic, followed by the cost of the generic. Almost half of the patients know about generic drugs, with their lower price being the most popular feature which most patients are familiar with. It seems that primarily the doctor and, subsequently the pharmacist play the most important role in a patient's decision to replace his/her medicine with a generic. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  5. The importance of being first: evidence from Canadian generic pharmaceuticals.

    PubMed

    Hollis, Aidan

    2002-12-01

    This paper uses pooled cross-section data on Canadian ethical drug sales to examine the effect of entry timing on sales of generic drugs. The data is for all drugs for which the first generic competitor entered during the years 1994-1997. It is found that the first generic entrant has a lasting competitive advantage: being first into the market appears to lead to an increase of around 30% in market share (among generics) over a period of at least 4 years. This finding has considerable implications for the current policy of allowing brandname drug companies to issue pseudo-generic equivalents as a preemptive strike against true generic competitors. Copyright 2002 John Wiley & Sons, Ltd.

  6. Generic penetration in the retail antidepressant market.

    PubMed

    Ventimiglia, Jeffrey; Kalali, Amir H

    2010-06-01

    In this article, we explore the accelerated penetration of generic antidepressants in the United States market following the availability of generic citalopram and sertraline. Analysis suggests that overall, generic penetration into the antidepressant market has grown from approximately 41 percent in January 2004 to over 73 percent in January 2010. Similar trends are uncovered when branded and generic prescriptions are analyzed by specialty.

  7. A review of the differences and similarities between generic drugs and their originator counterparts, including economic benefits associated with usage of generic medicines, using Ireland as a case study.

    PubMed

    Dunne, Suzanne; Shannon, Bill; Dunne, Colum; Cullen, Walter

    2013-01-05

    Generic medicines are those where patent protection has expired, and which may be produced by manufacturers other than the innovator company. Use of generic medicines has been increasing in recent years, primarily as a cost saving measure in healthcare provision. Generic medicines are typically 20 to 90% cheaper than originator equivalents. Our objective is to provide a high-level description of what generic medicines are and how they differ, at a regulatory and legislative level, from originator medicines. We describe the current and historical regulation of medicines in the world's two main pharmaceutical markets, in addition to the similarities, as well as the differences, between generics and their originator equivalents including the reasons for the cost differences seen between originator and generic medicines. Ireland is currently poised to introduce generic substitution and reference pricing. This article refers to this situation as an exemplar of a national system on the cusp of significant health policy change, and specifically details Ireland's history with usage of generic medicines and how the proposed changes could affect healthcare provision.

  8. Effects of generic versus non-generic feedback on motor learning in children.

    PubMed

    Chiviacowsky, Suzete; Drews, Ricardo

    2014-01-01

    Non-generic feedback refers to a specific event and implies that performance is malleable, while generic feedback implies that task performance reflects an inherent ability. The present study examined the influences of generic versus non-generic feedback on motor performance and learning in 10-year-old children. In the first experiment, using soccer ball kicking at a target as a task, providing participants with generic feedback resulted in worse performance than providing non-generic feedback, after both groups received negative feedback. The second experiment measured more permanent effects. Results of a retention test, performed one day after practicing a throwing task, showed that participants who received non-generic feedback during practice outperformed the generic feedback group, after receiving a negative feedback statement. The findings demonstrate the importance of the wording of feedback. Even though different positive feedback statements may not have an immediate influence on performance, they can affect performance, and presumably individuals' motivation, when performance is (purportedly) poor. Feedback implying that performance is malleable, rather than due to an inherent ability, seems to have the potential to inoculate learners against setbacks--a situation frequently encountered in the context of motor performance and learning.

  9. Generic medicine pricing in Europe: current issues and future perspective.

    PubMed

    Simoens, Steven

    2008-01-01

    This editorial discusses a number of trends affecting the pricing of generic medicines in Europe. With respect to pricing, recent evidence has emerged that European generic medicine manufacturers face competition from Indian manufacturers; that the price level of generic medicines varies substantially between European countries; and that generic medicine manufacturers engage in competition by discount rather than price competition in France, The Netherlands and the UK. These trends suggest that there may be scope for further reducing the prices of generic medicines in several countries. In relation to reference pricing, most European countries have incorporated market incentives within reference pricing systems with a view to promoting price competition. The European experience indicates that the generic medicines industry delivers competitive prices under a reference pricing system if demand-side policies are in place that stimulate physicians, pharmacists and patients to use generic medicines. Finally, caution needs to be exercised when focusing on the drivers of generic medicine pricing as these drivers not only vary between countries, but may also vary within a country. Manufacturers of originator and generic medicines do not take a single pricing approach following patent expiry, but vary their pricing strategy from molecule to molecule.

  10. Effects of Generic versus Non-Generic Feedback on Motor Learning in Children

    PubMed Central

    Chiviacowsky, Suzete; Drews, Ricardo

    2014-01-01

    Non-generic feedback refers to a specific event and implies that performance is malleable, while generic feedback implies that task performance reflects an inherent ability. The present study examined the influences of generic versus non-generic feedback on motor performance and learning in 10-year-old children. In the first experiment, using soccer ball kicking at a target as a task, providing participants with generic feedback resulted in worse performance than providing non-generic feedback, after both groups received negative feedback. The second experiment measured more permanent effects. Results of a retention test, performed one day after practicing a throwing task, showed that participants who received non-generic feedback during practice outperformed the generic feedback group, after receiving a negative feedback statement. The findings demonstrate the importance of the wording of feedback. Even though different positive feedback statements may not have an immediate influence on performance, they can affect performance, and presumably individuals' motivation, when performance is (purportedly) poor. Feedback implying that performance is malleable, rather than due to an inherent ability, seems to have the potential to inoculate learners against setbacks – a situation frequently encountered in the context of motor performance and learning. PMID:24523947

  11. A review of the differences and similarities between generic drugs and their originator counterparts, including economic benefits associated with usage of generic medicines, using Ireland as a case study

    PubMed Central

    2013-01-01

    Generic medicines are those where patent protection has expired, and which may be produced by manufacturers other than the innovator company. Use of generic medicines has been increasing in recent years, primarily as a cost saving measure in healthcare provision. Generic medicines are typically 20 to 90% cheaper than originator equivalents. Our objective is to provide a high-level description of what generic medicines are and how they differ, at a regulatory and legislative level, from originator medicines. We describe the current and historical regulation of medicines in the world’s two main pharmaceutical markets, in addition to the similarities, as well as the differences, between generics and their originator equivalents including the reasons for the cost differences seen between originator and generic medicines. Ireland is currently poised to introduce generic substitution and reference pricing. This article refers to this situation as an exemplar of a national system on the cusp of significant health policy change, and specifically details Ireland’s history with usage of generic medicines and how the proposed changes could affect healthcare provision. PMID:23289757

  12. Ethical challenges with welfare technology: a review of the literature.

    PubMed

    Hofmann, Bjørn

    2013-06-01

    Demographical changes in high income counties will increase the need of health care services but reduce the number of people to provide them. Welfare technology is launched as an important measure to meet this challenge. As with all types of technologies we must explore its ethical challenges. A literature review reveals that welfare technology is a generic term for a heterogeneous group of technologies and there are few studies documenting their efficacy, effectiveness and efficiency. Many kinds of welfare technology break with the traditional organization of health care. It introduces technology in new areas, such as in private homes, and it provides new functions, e.g. offering social stimuli and entertainment. At the same time welfare technology is developed for groups that traditionally have not been extensive technology users. This raises a series of ethical questions with regard to the development and use of welfare technologies, which are presented in this review. The main challenges identified are: (1) Alienation when advanced technology is used at home, (2) conflicting goals, as welfare technologies have many stakeholders with several ends, (3) respecting confidentiality and privacy when third-party actors are involved, (4) guaranteeing equal access and just distribution, and (5) handling conflicts between instrumental rationality and care in terms of respecting dignity and vulnerability. Addressing these issues is important for developing and implementing welfare technologies in a morally acceptable manner.

  13. Patterns of use for brand-name versus generic oral bisphosphonate drugs in Ontario over a 13-year period: a descriptive study.

    PubMed

    Fraser, Lisa-Ann; Albaum, Jordan M; Tadrous, Mina; Burden, Andrea M; Shariff, Salimah Z; Cadarette, Suzanne M

    2015-01-01

    Bisphosphonates are the first-line therapy for the treatment of osteoporosis. In the province of Ontario, the Ontario Drug Benefit Program funds medications for patients aged 65 years and older. The Ontario Drug Benefit Program has a generic substitution policy that requires lower-cost generic drugs to be dispensed when they are available. However, there is controversy surrounding the efficacy and tolerability of generic bisphosphonates. The objective of this study was to describe patterns in the use of brand-name versus generic formulations when dispensing oral bisphosphonate over a 13-year period. We identified all osteoporotic preparations for alendronate and risedronate that were dispensed through the Ontario Drug Benefit Program from 2001 to 2014. We stratified our sample into community-dwelling residents and residents in long-term care facilities. The number of prescriptions dispensed per month were plotted to illustrate trends over time. We found a rapid switch from brand-name to generic bisphosphonate equivalents immediately after the generic became available on the Ontario Drug Benefit formulary, with generics accounting for > 88% of dispensed drug within 2 months. We also observed a reduction in the number of generic drugs dispensed each time a new brand-name alternative (e.g., monthly risedronate, weekly alendronate plus vitamin D) was introduced to the formulary. The dispensing trends were similar in the community and long-term care settings. The Ontario Drug Benefit Program generic substitution policy resulted in rapid uptake of generic oral bisphosphonates among seniors in Ontario. However, there was a switch away from generic medications to new brand-name alternatives whenever they were introduced to the formulary. Therefore, some patients continued to use brand-name bisphosphonate despite the availability of generic options.

  14. Impact of generic substitution decision support on electronic prescribing behavior.

    PubMed

    Stenner, Shane P; Chen, Qingxia; Johnson, Kevin B

    2010-01-01

    To evaluate the impact of generic substitution decision support on electronic (e-) prescribing of generic medications. The authors analyzed retrospective outpatient e-prescribing data from an academic medical center and affiliated network for July 1, 2005-September 30, 2008 using an interrupted time-series design to assess the rate of generic prescribing before and after implementing generic substitution decision support. To assess background secular trends, e-prescribing was compared with a concurrent random sample of hand-generated prescriptions. Proportion of generic medications prescribed before and after the intervention, evaluated over time, and compared with a sample of prescriptions generated without e-prescribing. The proportion of generic medication prescriptions increased from 32.1% to 54.2% after the intervention (22.1% increase, 95% CI 21.9% to 22.3%), with no diminution in magnitude of improvement post-intervention. In the concurrent control group, increases in proportion of generic prescriptions (29.3% to 31.4% to 37.4% in the pre-intervention, post-intervention, and end-of-study periods, respectively) were not commensurate with the intervention. There was a larger change in generic prescribing rates among authorized prescribers (24.6%) than nurses (18.5%; adjusted OR 1.38, 95% CI 1.17 to 1.63). Two years after the intervention, the proportion of generic prescribing remained significantly higher for e-prescriptions (58.1%; 95% CI 57.5% to 58.7%) than for hand-generated prescriptions ordered at the same time (37.4%; 95% CI 34.9% to 39.9%) (p<0.0001). Generic prescribing increased significantly in every specialty. Implementation of generic substitution decision support was associated with dramatic and sustained improvements in the rate of outpatient generic e-prescribing across all specialties.

  15. Impact of generic substitution decision support on electronic prescribing behavior

    PubMed Central

    Chen, Qingxia; Johnson, Kevin B

    2010-01-01

    Objective To evaluate the impact of generic substitution decision support on electronic (e-) prescribing of generic medications. Design The authors analyzed retrospective outpatient e-prescribing data from an academic medical center and affiliated network for July 1, 2005–September 30, 2008 using an interrupted time-series design to assess the rate of generic prescribing before and after implementing generic substitution decision support. To assess background secular trends, e-prescribing was compared with a concurrent random sample of hand-generated prescriptions. Measurements Proportion of generic medications prescribed before and after the intervention, evaluated over time, and compared with a sample of prescriptions generated without e-prescribing. Results The proportion of generic medication prescriptions increased from 32.1% to 54.2% after the intervention (22.1% increase, 95% CI 21.9% to 22.3%), with no diminution in magnitude of improvement post-intervention. In the concurrent control group, increases in proportion of generic prescriptions (29.3% to 31.4% to 37.4% in the pre-intervention, post-intervention, and end-of-study periods, respectively) were not commensurate with the intervention. There was a larger change in generic prescribing rates among authorized prescribers (24.6%) than nurses (18.5%; adjusted OR 1.38, 95% CI 1.17 to 1.63). Two years after the intervention, the proportion of generic prescribing remained significantly higher for e-prescriptions (58.1%; 95% CI 57.5% to 58.7%) than for hand-generated prescriptions ordered at the same time (37.4%; 95% CI 34.9% to 39.9%) (p<0.0001). Generic prescribing increased significantly in every specialty. Conclusion Implementation of generic substitution decision support was associated with dramatic and sustained improvements in the rate of outpatient generic e-prescribing across all specialties. PMID:20962131

  16. Factors influencing the preference for purchasing generic drugs in a Southern Brazilian city

    PubMed Central

    Guttier, Marília Cruz; Silveira, Marysabel Pinto Telis; Luiza, Vera Lucia; Bertoldi, Andréa Dâmaso

    2017-01-01

    ABSTRACT OBJECTIVE The objective of this study is to identify factors associated with the preference for purchasing generic drugs in a medium-sized municipality in Southern Brazil. METHODS We have analyzed data from a population-based cross-sectional study conducted in 2012 with a sample of 2,856 adults (≥ 20 years old). The preference for purchasing generic drugs was the main outcome. The explanatory variables were the demographic and socioeconomic variables. Statistical analyses included Poisson regressions. RESULTS The preference for purchasing generic drugs was 63.2% (95%CI 61.4–64.9). The variables correlated with this preference in the fully adjusted models were: male (prevalence ratio [PR] = 1.08; 95%CI 1.03–1.14), age of 20–39 years (PR = 1.10; 95%CI 1.02–1.20), low socioeconomic status (PR = 1.15; 95%CI 1.03–1.28), and good knowledge about generic drugs (PR= 4.66; 95%CI 2.89–7.52). Among those who preferred to purchase generic drugs, 55.1% have reported accepting to replace the prescribed drug (if not a generic) with the equivalent generic drug. Another correlate of the preference for purchasing generic drugs was because individuals consider their quality equivalent to reference medicines (PR = 2.15; 95%CI 1.93–2.41). CONCLUSIONS Knowledge about generic drugs was the main correlate of the preference for purchasing generic drugs. The greater the knowledge or positive perception about generic drugs, the greater is the preference to purchase them. Therefore, educational campaigns for healthcare professionals and consumers appear to be the best strategy for expanding the use of generic drugs in Brazil. PMID:28678909

  17. Determinants of generic drug substitution in Switzerland.

    PubMed

    Decollogny, Anne; Eggli, Yves; Halfon, Patricia; Lufkin, Thomas M

    2011-01-26

    Since generic drugs have the same therapeutic effect as the original formulation but at generally lower costs, their use should be more heavily promoted. However, a considerable number of barriers to their wider use have been observed in many countries. The present study examines the influence of patients, physicians and certain characteristics of the generics' market on generic substitution in Switzerland. We used reimbursement claims' data submitted to a large health insurer by insured individuals living in one of Switzerland's three linguistic regions during 2003. All dispensed drugs studied here were substitutable. The outcome (use of a generic or not) was modelled by logistic regression, adjusted for patients' characteristics (gender, age, treatment complexity, substitution groups) and with several variables describing reimbursement incentives (deductible, co-payments) and the generics' market (prices, packaging, co-branded original, number of available generics, etc.). The overall generics' substitution rate for 173,212 dispensed prescriptions was 31%, though this varied considerably across cantons. Poor health status (older patients, complex treatments) was associated with lower generic use. Higher rates were associated with higher out-of-pocket costs, greater price differences between the original and the generic, and with the number of generics on the market, while reformulation and repackaging were associated with lower rates. The substitution rate was 13% lower among hospital physicians. The adoption of the prescribing practices of the canton with the highest substitution rate would increase substitution in other cantons to as much as 26%. Patient health status explained a part of the reluctance to substitute an original formulation by a generic. Economic incentives were efficient, but with a moderate global effect. The huge interregional differences indicated that prescribing behaviours and beliefs are probably the main determinant of generic substitution.

  18. Has ICT come of age? Recurring debates on the role of ICT in education, 1982 2004

    NASA Astrophysics Data System (ADS)

    Wellington, Jerry

    2005-01-01

    Information and Communication Technology (ICT) has now been used in science and technology education, and in other areas of the curriculum, for over 20 years. ICT has been introduced into school education through a series of heavily funded government initiatives since the launch of microcomputers into schools in 1981. This spate of initiatives has involved a mixture of hardware, software and teacher-training, though not always in a coordinated fashion. A number of issues raised by the advent of ICT have specific relevance to those involved in science and technology education at all levels, but equally, the issues and debates highlighted in this paper are of a generic nature and are applicable to ICT use across the curriculum. I argue that the debates raised by ICT use fall into three categories: the vocational, the pedagogical and the societal. These debates are likely to be perennial and recurring, whatever the advancement made in the technology itself.

  19. A review of technologies applicable to low-speed flight of high-performance aircraft investigated in the Langley 14- x 22-foot subsonic tunnel

    NASA Technical Reports Server (NTRS)

    Paulson, John W., Jr.; Quinto, P. Frank; Banks, Daniel W.; Kemmerly, Guy T.; Gatlin, Gregory M.

    1988-01-01

    An extensive research program has been underway at the NASA Langley Research Center to define and develop the technologies required for low-speed flight of high-performance aircraft. This 10-year program has placed emphasis on both short takeoff and landing (STOL) and short takeoff and vertical landing (STOVL) operations rather than on regular up and away flight. A series of NASA in-house as well as joint projects have studied various technologies including high lift, vectored thrust, thrust-induced lift, reversed thrust, an alternate method of providing trim and control, and ground effects. These technologies have been investigated on a number of configurations ranging from industry designs for advanced fighter aircraft to generic wing-canard research models. Test conditions have ranged from hover (or static) through transition to wing-borne flight at angles of attack from -5 to 40 deg at representative thrust coefficients.

  20. Hybridity as a process of technology's 'translation': customizing a national Electronic Patient Record.

    PubMed

    Petrakaki, Dimitra; Klecun, Ela

    2015-01-01

    This paper explores how national Electronic Patient Record (EPR) systems are customized in local settings and, in particular, how the context of their origin plays out with the context of their use. It shows how representations of healthcare organizations and of local clinical practice are built into EPR systems within a complex context whereby different stakeholder groups negotiate to produce an EPR package that aims to meet both local and generic needs. The paper draws from research into the implementation of the National Care Record Service, a part of the National Programme for Information Technology (NPfIT), in the English National Health Service (NHS). The paper makes two arguments. First, customization of national EPR is a distributed process that involves cycles of 'translation', which span across geographical, cultural and professional boundaries. Second, 'translation' is an inherently political process during which hybrid technology gets consolidated. The paper concludes, that hybrid technology opens up possibilities for standardization of healthcare. Copyright © 2014 Elsevier Ltd. All rights reserved.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top