Use of Interdisciplinary Education to Foster Familiarization among Health Professionals.

ERIC Educational Resources Information Center

Laatsch, Linda J.; And Others

1986-01-01

Describes a pilot interdisciplinary experience between the dental hygiene and medical technology programs at Marquette University. It was designed, in part, to familiarize dental hygiene students with the medical technology profession. Comments solicited from students on the final evaluation form indicated that this pilot project was highly…

TECHNOLOGY AND MANPOWER IN DESIGN AND DRAFTING 1965-75. MANPOWER RESEARCH BULLETIN NUMBER 12.

ERIC Educational Resources Information Center

Office of Manpower Policy, Evaluation, and Research (DOL), Washington, DC.

AS PART OF AN EXPERIMENTAL AND DEMONSTRATION PROJECT LAUNCHED BY THE DEPARTMENT OF LABOR IN 1965 TO EMPHASIZE LIKELY FUTURE TECHNOLOGICAL AND MANPOWER CHANGES, THIS STUDY OF THE DESIGN AND DRAFTING PROCESS AIMED TO IDENTIFY THE MAJOR TECHNOLOGICAL CHANGES IN THE NEXT 10 YEARS, TO DETERMINE THE EXTENT AND RATE OF DIFFUSION OF THESE CHANGES, AND TO…

A Comparative Analysis of Spatial Visualization Ability and Drafting Models for Industrial and Technology Education Students

ERIC Educational Resources Information Center

Katsioloudis, Petros; Jovanovic, Vukica; Jones, Mildred

2014-01-01

The main purpose of this study was to determine significant positive effects among the use of three different types of drafting models, and to identify whether any differences exist towards promotion of spatial visualization ability for students in Industrial Technology and Technology Education courses. In particular, the study compared the use of…

77 FR 52692 - NIST Federal Information Processing Standard (FIPS) 140-3 (Second Draft), Security Requirements...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-30

...-03] NIST Federal Information Processing Standard (FIPS) 140-3 (Second Draft), Security Requirements... Technology (NIST), Commerce. ACTION: Notice and Request for Comments. SUMMARY: The National Institute of Standards and Technology (NIST) seeks additional comments on specific sections of Federal Information...

Incorporating digital imaging into dental hygiene practice.

PubMed

Saxe, M J; West, D J

1997-01-01

The objective of this paper is to describe digital imaging technology: available modalities, scientific imaging process, advantages and limitations, and applications to dental hygiene practice. Advances in technology have created innovative imaging modalities for intraoral radiography that eliminate film as the traditional image receptor. Digital imaging generates instantaneous radiographic images on a display monitor following exposure. Advantages include lower patient exposure per image and elimination of film processing. Digital imaging enhances diagnostic capabilities and, therefore, treatment decisions by the oral healthcare provider. Utilization of digital imaging technology for intraoral radiography will advance the practice of dental hygiene. Although spatial resolution is inferior to conventional film, digital imaging provides adequate resolution to diagnose oral diseases. Dental hygienists must evaluate new technologies in radiography to continue providing quality care while reducing patient exposure to ionizing radiation.

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 6: Controls and guidance

NASA Technical Reports Server (NTRS)

1991-01-01

Viewgraphs of briefings from the Space Systems and Technology Advisory Committee (SSTAC)/ARTS review of the draft Integrated Technology Plan (ITP) on controls and guidance are included. Topics covered include: strategic avionics technology planning and bridging programs; avionics technology plan; vehicle health management; spacecraft guidance research; autonomous rendezvous and docking; autonomous landing; computational control; fiberoptic rotation sensors; precision instrument and telescope pointing; microsensors and microinstruments; micro guidance and control initiative; and earth-orbiting platforms controls-structures interaction.

Theoretical and practical considerations for the development of online international collaborative learning for dental hygiene students.

PubMed

Gussy, M G; Knevel, R J M; Sigurdson, V; Karlberg, G

2006-08-01

Globalization and concurrent development in computer and communication technology has increased interest in collaborative online teaching and learning for students in higher education institutions. Many institutions and teachers have introduced computer-supported programmes in areas including dental hygiene. The potential for the use of this technology is exciting; however, its introduction should be careful and considered. We suggest that educators wanting to introduce computer-supported programmes make explicit their pedagogical principles and then select technologies that support and exploit these principles. This paper describes this process as it was applied to the development of an international web-based collaborative learning programme for dental hygiene students.

Effect of brief sleep hygiene education for workers of an information technology company.

PubMed

Kakinuma, Mitsuru; Takahashi, Masaya; Kato, Noritada; Aratake, Yutaka; Watanabe, Mayumi; Ishikawa, Yumi; Kojima, Reiko; Shibaoka, Michi; Tanaka, Katsutoshi

2010-01-01

To investigate the effects of sleep hygiene education for workers of an information technology (IT) company, we conducted a controlled clinical trial providing 581 workers one-hour sleep hygiene education. The contents of the sleep hygiene education program were a review of sleep habits, provide sleep hygiene education, and the establishment of sleep habit goals. A self-report questionnaire was used to measure outcomes including the Pittsburgh Sleep Quality Index (PSQI), Karolinska Sleepiness Scale (KSS), Checklist Individual Strength (CIS), Center for Epidemiologic Studies for Depression (CES-D), and mean sleep duration on weekdays before and 4 wk after the intervention. A total of 391 participants were included in the analysis, with 214 participants in the sleep hygiene education group and 177 in the waiting list group. KSS score at 2 P.M. decreased by 0.42 points in the sleep hygiene education group, but increased by 0.08 points in the waiting list group, showing a significant effect size of 0.50 (95%CI, -0.97 to -0.04, p<0.05). PSQI score also improved, but the inter-group difference was not statically significant. The present study provides preliminary evidence that brief sleep hygiene education may improve afternoon sleepiness at work, but not sleep at night for IT workers.

DRAFT of Final Report of the Assumable Waters Subcommittee Submitted to the National Advisory Council for Environmental Policy and Technology (NACEPT)

EPA Pesticide Factsheets

This is a draft of the recommendations that that Assumable Waters Subcommittee will present to NACEPT on May 10. It should be considered a draft until it is approved and transmitted to the EPA by NACEPT

77 FR 52024 - Notification of a Public Teleconference of the Chartered Science Advisory Board

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-28

... Amphibole Asbestos and (2) an SAB draft report regarding EPA's Scientific and Technological Achievement... review of an SAB draft report reviewing EPA's Toxicological Review of Libby Amphibole Asbestos. The... entitled ``Toxicological Review of Libby Amphibole Asbestos.'' The EPA's draft assessment evaluates cancer...

Curriculum Guide for Drafting Communication in Technology Education.

ERIC Educational Resources Information Center

Connecticut Industrial Technology Association.

Consistent with the principles of the Connecticut Common Core of Learning, this competency-based curriculum guide for drafting provides a reference guide for educators to research and prepare for teaching the field of drafting communications. The guide contains 44 units in three levels. The introductory level covers the following topics:…

77 FR 40586 - Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-10

...-01] Draft NIST Interagency Report (NISTIR) 7823, Advanced Metering Infrastructure Smart Meter... Technology (NIST) seeks comments on Draft NISTIR 7823, Advanced Metering Infrastructure Smart Meter.... Electronic comments should be sent to: Michaela Iorga at [email protected]nist.gov , with a Subject line...

Drafting & Design Technology. Technical Committee Report.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in drafting and design technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and…

Drafting and Design Technology Curriculum Guide.

ERIC Educational Resources Information Center

Idaho State Dept. of Education, Boise. Div. of Vocational Education.

This document provides lists of tasks, performance objectives, and enabling objectives for 1,800 hours of postsecondary instruction or 900 hours of secondary instruction in the drafting and design technology program. Following a list of tasks and an explanation of the program, the bulk of the document consists of 25 modules, each of which is a…

78 FR 63964 - Request for Comments on Draft NIST Interagency Report (NISTIR) 7628 Rev. 1, Guidelines for Smart...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Grid Cyber Security AGENCY: National Institute of Standards and Technology (NIST), Department of... and Technology (NIST) seeks comments on draft NISTIR 7628 Rev. 1, Guidelines for Smart Grid Cyber... (formerly the Cyber Security Working Group) of the Smart Grid Interoperability Panel. The document has been...

Mississippi Curriculum Framework for Dental Hygiene Technology (Program CIP: 51.0602--Dental Hygienist). Postsecondary Education.

ERIC Educational Resources Information Center

Mississippi Research and Curriculum Unit for Vocational and Technical Education, State College.

This document, which is intended for use by community and junior colleges throughout Mississippi, contains curriculum frameworks for the course sequences in the dental hygiene technology program. Presented in the introductory section are a description of the program and suggested course sequence. Section I lists baseline competencies. Section II…

EPA scientific integrity policy draft

NASA Astrophysics Data System (ADS)

Showstack, Randy

2011-08-01

The U.S. Environmental Protection Agency (EPA) issued its draft scientific integrity policy on 5 August. The draft policy addresses scientific ethical standards, communications with the public, the use of advisory committees and peer review, and professional development. The draft policy was developed by an ad hoc group of EPA senior staff and scientists in response to a December 2010 memorandum on scientific integrity from the White House Office of Science and Technology Policy. The agency is accepting public comments on the draft through 6 September; comments should be sent to osa.staff@epa.gov. For more information, see http://www.epa.gov/stpc/pdfs/draft-scientific-integrity-policy-aug2011.pdf.

75 FR 75704 - Notice of Availability of Draft Supplement to the Environmental Assessment for the Proposed Pa...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-06

... irradiation, and (3) alternative sites for Pa'ina's irradiator. DATES: The public comment period on the Draft...'s irradiator, (2) electron-beam technology as an alternative to cobalt-60 irradiation, and (3... be used for the production and research irradiation of food, cosmetic, and pharmaceutical products...

Dental Hygiene Education Workshop: Proceedings of Workshop on Dental Hygiene Education (Denver, Colorado, July 22-23, 1984).

ERIC Educational Resources Information Center

American Dental Hygienists' Association, Chicago, IL.

Proceedings from the first in a yearly series of conferences on dental hygiene education sponsored by the American Dental Hygienists' Association are presented. Three sessions are as follows: (1) "Society at Large: Economics, Cultural Trends, Work Trends, Demographics, and Technology" (Felix Kaufmann); (2) "The Health Care System: Changes and…

Distance Education in Dental Hygiene Bachelor of Science Degree Completion Programs: As Perceived by Students and Faculty

ERIC Educational Resources Information Center

Tsokris, Maureen

2010-01-01

This study investigated student and faculty perceptions of their experiences with online learning in dental hygiene Bachelor of Science degree completion programs on the dimensions of: quality of learning, connectedness to the learning environment, technology factors and student satisfaction. The experiences of dental hygiene students who took…

A profitable hygiene system: not an undervalued practice resource, part 2.

PubMed

Doherty, Hugh; Davis, Karen; Miller, Kimberly

2009-02-01

In this 2-part article, we have addressed the correct methods to use in selecting the right hygienist and the importance of creating a purposeful vision for your dental hygiene department. We have touched on the role of having the doctor discuss practice expectations, and the qualities and traits a dental hygienist should possess. Finally we have briefly reviewed some ideas regarding hygienist compensation as well as the integration of the new technologies to help you build a successful, productive, and profitable dental hygiene department. Many of today's practice owners have invested hundreds of thousands of dollars in updated facilities and state-of-the-art technology. They have invested in management and leadership courses, developed their business acumen, and have worked to insure that their clinical assistants' skills stay sharp. However, when it comes to dental hygiene, too many practices still operate a 1980s-style "prophylaxis mindset palace." The time has come for more dentists to embrace up-to-date dental hygiene practice standards.

A Thesaurus for Information Technology and Education. Occasional Paper ITE/6/86.

ERIC Educational Resources Information Center

Lewis, R.

Prepared for use by the Information Technology and Education (ITE) Programme of the Economic and Social Science Research Council (ESRC), this draft document is based on the 1984 EUDISED (European Documentation and Information System for Education) Thesaurus for Information Processing. This draft is a modified thesaurus which aims to keep as close…

A Guide for Planning Drafting and Design Technology Programs. Section III, Data Collection and Analysis.

ERIC Educational Resources Information Center

1971

This document, the second of three related reports, constitutes the data collection and analysis section of the study designed to provide information for preparing a planning guide for drafting and design technology programs. The curriculum survey instrument mailed to 26 schools, contained questions regarding: (1) length of semesters, (2)…

Mechanical Design Technology--Modified. (Computer Assisted Drafting, Computer Aided Design). Curriculum Grant 84/85.

ERIC Educational Resources Information Center

Schoolcraft Coll., Livonia, MI.

This document is a curriculum guide for a program in mechanical design technology (computer-assisted drafting and design developed at Schoolcraft College, Livonia, Michigan). The program helps students to acquire the skills of drafters and to interact with electronic equipment, with the option of becoming efficient in the computer-aided…

Reflections on the Draft National Educational Technology Plan 2010: Foundations for Transformation

ERIC Educational Resources Information Center

Dede, Chris

2010-01-01

This article provides personal reflections about aspects of the draft "National Educational Technology Plan 2010". Its focus is on ideas in the Plan that could be foundational for transforming our industrial-era schooling system. In sharing these thoughts, the author is speaking only for himself: they do not necessarily reflect the discussions or…

Response to the Articles on the Draft 2010 National Educational Technology Plan

ERIC Educational Resources Information Center

Atkins, Dan; Bennett, John; Brown, John Seely; Dede, Chris; Fishman, Barry; Means, Barbara, Pea, Roy; Thille, Candace; Williams, Brenda

2011-01-01

As people who were involved with drafting the 2010 National Educational Technology Plan (NETP), the authors have taken the opportunity to respond to the very interesting perspectives in this special issue. The thoughts here represent only their views and are not an official statement of either the US Department of Education or the NETP Technical…

Use of a verbal electronic audio reminder with a patient hand hygiene bundle to increase independent patient hand hygiene practices of older adults in an acute care setting.

PubMed

Knighton, Shanina C; Dolansky, Mary; Donskey, Curtis; Warner, Camille; Rai, Herleen; Higgins, Patricia A

2018-06-01

We hypothesized that the addition of a novel verbal electronic audio reminder to an educational patient hand hygiene bundle would increase performance of self-managed patient hand hygiene. We conducted a 2-group comparative effectiveness study randomly assigning participants to patient hand hygiene bundle 1 (n = 41), which included a video, a handout, and a personalized verbal electronic audio reminder (EAR) that prompted hand cleansing at 3 meal times, or patient hand hygiene bundle 2 (n = 34), which included the identical video and handout, but not the EAR. The primary outcome was alcohol-based hand sanitizer use based on weighing bottles of hand sanitizer. Participants that received the EAR averaged significantly more use of hand sanitizer product over the 3 days of the study (mean ± SD, 29.97 ± 17.13 g) than participants with no EAR (mean ± SD, 10.88 ± 9.27 g; t 73  = 5.822; P ≤ .001). The addition of a novel verbal EAR to a patient hand hygiene bundle resulted in a significant increase in patient hand hygiene performance. Our results suggest that simple audio technology can be used to improve patient self-management of hand hygiene. Future research is needed to determine if the technology can be used to promote other healthy behaviors, reduce infections, and improve patient-centered care without increasing the workload of health care workers. Published by Elsevier Inc.

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 3: Space power and thermal management

NASA Technical Reports Server (NTRS)

1991-01-01

Viewgraphs of briefings from the SSTAC/ARTS review of the draft integrated technology plan on thermal power and thermal management are presented. Topics covered include: space energy conversion research and technology; space photovoltaic energy conversion; chemical energy conversion and storage; thermal energy conversion; power management; thermal management; space nuclear power; high capacity power; surface power and thermal management; space platforms power and thermal management; and project SELENE.

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 3: Space power and thermal management

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Viewgraphs of briefings from the SSTAC/ARTS review of the draft integrated technology plan on thermal power and thermal management are presented. Topics covered include: space energy conversion research and technology; space photovoltaic energy conversion; chemical energy conversion and storage; thermal energy conversion; power management; thermal management; space nuclear power; high capacity power; surface power and thermal management; space platforms power and thermal management; and project SELENE.

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 8: Aerothermodynamics Automation and Robotics (A/R) systems sensors, high-temperature superconductivity

NASA Technical Reports Server (NTRS)

1991-01-01

Viewgraphs of briefings presented at the SSTAC/ARTS review of the draft Integrated Technology Plan (ITP) on aerothermodynamics, automation and robotics systems, sensors, and high-temperature superconductivity are included. Topics covered include: aerothermodynamics; aerobraking; aeroassist flight experiment; entry technology for probes and penetrators; automation and robotics; artificial intelligence; NASA telerobotics program; planetary rover program; science sensor technology; direct detector; submillimeter sensors; laser sensors; passive microwave sensing; active microwave sensing; sensor electronics; sensor optics; coolers and cryogenics; and high temperature superconductivity.

SSTAC/ARTS review of the draft Integrated Technology Plan (ITP). Volume 8: Aerothermodynamics Automation and Robotics (A/R) systems sensors, high-temperature superconductivity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

Viewgraphs of briefings presented at the SSTAC/ARTS review of the draft Integrated Technology Plan (ITP) on aerothermodynamics, automation and robotics systems, sensors, and high-temperature superconductivity are included. Topics covered include: aerothermodynamics; aerobraking; aeroassist flight experiment; entry technology for probes and penetrators; automation and robotics; artificial intelligence; NASA telerobotics program; planetary rover program; science sensor technology; direct detector; submillimeter sensors; laser sensors; passive microwave sensing; active microwave sensing; sensor electronics; sensor optics; coolers and cryogenics; and high temperature superconductivity.

A Survey of Former Drafting & Engineering Design Technology Students. Summary Findings of Respondents District-Wide.

ERIC Educational Resources Information Center

Glyer-Culver, Betty

In fall 2001 staff of the Los Rios Community College District Office of Institutional Research collaborated with occupational deans, academic deans, and faculty to develop and administer a survey of former Drafting and Engineering Design Technology students. The survey was designed to determine how well courses had met the needs of former drafting…

Computer Aided Drafting and Design, Industrial Manufacturing Technician, and Mechanical Engineering Technician and Machine Tool, Die and Moldmaking Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Mid-East Ohio Tech Prep Consortium, Zanesville.

This document contains competency profiles in four areas: computer-aided drafting and design; industrial manufacturing technician; mechanical engineering technician; and machine tool, die, and moldmaking technology occupations. The profiles are intended for use in articulating tech prep programs from high school through associate degrees in Ohio.…

Using high-technology to enforce low-technology safety measures: the use of third-party remote video auditing and real-time feedback in healthcare.

PubMed

Armellino, Donna; Hussain, Erfan; Schilling, Mary Ellen; Senicola, William; Eichorn, Ann; Dlugacz, Yosef; Farber, Bruce F

2012-01-01

Hand hygiene is a key measure in preventing infections. We evaluated healthcare worker (HCW) hand hygiene with the use of remote video auditing with and without feedback. The study was conducted in an 17-bed intensive care unit from June 2008 through June 2010. We placed cameras with views of every sink and hand sanitizer dispenser to record hand hygiene of HCWs. Sensors in doorways identified when an individual(s) entered/exited. When video auditors observed a HCW performing hand hygiene upon entering/exiting, they assigned a pass; if not, a fail was assigned. Hand hygiene was measured during a 16-week period of remote video auditing without feedback and a 91-week period with feedback of data. Performance feedback was continuously displayed on electronic boards mounted within the hallways, and summary reports were delivered to supervisors by electronic mail. During the 16-week prefeedback period, hand hygiene rates were less than 10% (3933/60 542) and in the 16-week postfeedback period it was 81.6% (59 627/73 080). The increase was maintained through 75 weeks at 87.9% (262 826/298 860). The data suggest that remote video auditing combined with feedback produced a significant and sustained improvement in hand hygiene.

Effectiveness of Drafting Models for Engineering Technology Students and Impacts on Spatial Visualization Ability: An Analysis and Consideration of Critical Variables

ERIC Educational Resources Information Center

Katsioloudis, Petros J.; Stefaniak, Jill E.

2018-01-01

Results from a number of studies indicate that the use of drafting models can positively influence the spatial visualization ability for engineering technology students. However, additional variables such as light, temperature, motion and color can play an important role but research provides inconsistent results. Considering this, a set of 5…

[Medico-prophylactic foundations of the safety of information and communication technologies used in educational institutions].

PubMed

Baranov, A A; Kuchma, V R; Sukhareva, L M; Stepanova, M I; Teksheva, L M

2011-01-01

The problems pertaining to the safety of information and communication technologies used in the spheres of education and leisure activities of children and adolescents are discussed. The relevant risk factors are identified. Results of physiological and hygienic studies for substantiating regulations of continuous work with a personal computer are presented taking into account the children's age and hygienic requirements to electronic teaching aids.

[Hygienic and ergonomic analysis of the technology for sinking main and subsidiary mine shafts].

PubMed

Meniaĭlo, N I; Tyshlek, E G; Gritsenko, V S; Shemiakin, G M

1989-01-01

The labour conditions in mine shafts do not correspond to the existing ergonomic and hygienic norms. Drilling and blasting techniques are most hazardous as to the gravity and duration of the factors involved. Working conditions normalization should be based on the elaboration of specifically innovative technologies which should envisage the workers' periodic staying in the mine shaft area during the work shift.

Engineering Documentation and Data Control

NASA Technical Reports Server (NTRS)

Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

2001-01-01

Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

The effect of automated monitoring and real-time prompting on nurses' hand hygiene performance.

PubMed

Levchenko, Alexander I; Boscart, Veronique M; Fernie, Geoff R

2013-10-01

Adequate hand hygiene compliance by healthcare staff is considered an effective method to reduce hospital-acquired infections. The electronic system developed at Toronto Rehabilitation Institute automatically detects hand hygiene opportunities and records hand hygiene actions. It includes an optional visual hand hygiene status indication, generates real-time hand hygiene prompting signals, and enables automated monitoring of individual and aggregated hand hygiene performance. The system was installed on a complex continuous care unit at the entrance to 17 patient rooms and a utility room. A total of 93 alcohol gel and soap dispensers were instrumented and 14 nurses were provided with the personal wearable electronic monitors. The study included three phases with the system operating in three different modes: (1) an inactive mode during the first phase when hand hygiene opportunities and hand hygiene actions were recorded but prompting and visual indication functions were disabled, (2) only hand hygiene status indicators were enabled during the second phase, and (3) both hand hygiene status and real-time hand hygiene prompting signals were enabled during the third phase. Data collection was performed automatically during all of the three phases. The system indicated significantly higher hand hygiene activity rates and compliance during the third phase, with both hand hygiene indication and real-time prompting functions enabled. To increase the efficacy of the technology, its use was supplemented with individual performance reviews of the automatically collected data.

COMPUTER-AIDED DRAFTING AND DESIGN, A THREE-WEEK SUMMER INSTITUTE TRAINING PROGRAM (MIAMI-DADE JUNIOR COLLEGE, MIAMI, FLORIDA, JULY 10, 1967 - JULY 28, 1967). FINAL REPORT.

ERIC Educational Resources Information Center

MORPHONIOS, ALEX G.

THIRTY-SIX INSTRUCTORS, SUPERVISORS, AND DEPARTMENT CHAIRMEN IN AREAS OF DRAFTING, ENGINEERING, MANUFACTURING, AND COMPUTER TECHNOLOGY AT JUNIOR COLLEGES, TECHNICAL, AND AREA VOCATIONAL SCHOOLS IN 20 STATES ATTENDED A 3-WEEK SUMMER INSTITUTE TRAINING PROGRAM ON COMPUTER-AIDED DRAFTING AND DESIGN. EXPERIENCE IN PROGRAMING THE IBM SYSTEM 1620 WITH…

Hospitals as factories of medical garbage.

PubMed

Hodges, Sarah

2017-12-01

Over the course of the twentieth century, as hospitals cleaned up, they came to produce more and more rubbish. Beginning in the 1970s and gaining pace in the 1980s and 1990s, single-use plastic items (syringes, blood bags, tubing) saturated everyday medical practice across the globe. This essay brings the question of plastic to bear upon the longer history of twentieth century sanitary science. The widespread adoption of single-use disposable medical plastics consolidated a century's worth of changes in medical hygiene. As strange as it may seem today, the initial uptake of medical plastics was not driven primarily by concerns about hygiene. Plastic began as a mid-century technology of convenience and durability. It was not until the end of the twentieth century that it morphed into a powerful symbol and instrument of medical hygiene. Today, both patients and practitioners have embraced plastic as an indispensable technology of clean medicine. The procession of single-use medical plastics through everyday medicine now comprises a constant, if disposable, infrastructure of medical hygiene. This new processional infrastructure of disposable hygiene has produced another, albeit unintended, consequence. This new regime has exponentially increased hospitals' material outputs. In so doing, plastic has refigured the ecologies of everyday medicine. Plastic hygiene has rendered hospitals factories of medical garbage.

76 FR 82306 - Draft Guidance for Industry on Use of Histology in Biomarker Qualification Studies; Availability

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-30

... evolution and reversibility of morphologic changes. Because of the many variations in the practice of..., and other forms of information technology. This draft guidance refers to previously approved...

California Diploma Project Technical Report II: Alignment Study--Alignment Study of the Health Sciences and Medical Technology Draft Standards and California's Exit Level Common Core State Standards

ERIC Educational Resources Information Center

McGaughy, Charis; de Gonzalez, Alicia

2012-01-01

The California Department of Education is in the process of revising the Career and Technical Education (CTE) Model Curriculum Standards. The Educational Policy Improvement Center (EPIC) conducted an investigation of the draft version of the Health Sciences and Medical Technology Standards (Health Science). The purpose of the study is to…

For Drafting Programs--Computer Graphics in Industrial Tech.

ERIC Educational Resources Information Center

Sutliff, Ron

1980-01-01

Posits that computer-aided drafting and design should be introduced to students in industrial technology programs. Discusses ways the technical educator can get involved in computer graphics to familiarize students with it without a large outlay of money. (JOW)

Antiseptic technology: access, affordability, and acceptance.

PubMed Central

Boyce, J. M.

2001-01-01

Factors other than antimicrobial activity of soaps and antiseptic agents used for hand hygiene by health personnel play a role in compliance with recommendations. Hand hygiene products differ considerably in acceptance by hospital personnel. If switching from a nonmedicated soap to an antiseptic agent or increased use of an existing antiseptic agent for hand hygiene prevented a few more infections per year, additional expenditures for antiseptic agents would be offset by cost savings. PMID:11294713

[Hygienic characteristics of work conditions at large Hydroelectric Power Plants with mechanization and automatization].

PubMed

Iakimova, L D

1997-01-01

The article touches upon hygienic problems associated with mechanization and automation of major hydroelectric power stations. The authors present criteria to evaluate work conditions of the main occupations participating in the technologic process of hydroelectric power stations.

Investigations of perspective technologies, equipment and sanitary - hygienic means for Life-Support System of new generation

NASA Astrophysics Data System (ADS)

Shumilina, I. V.

Creation of optimal sanitary - hygienic conditions allows to keep health and capacity of the crewmembers work at increase of space flight duration. There is a wide application experience of means, methods and equipment for sanitary - hygienic supply, which were developed and experimentally tested for space flights. However, about 800 kg personal hygiene means (napkins and towels are made with water and delivered with the Earth) are necessary for 3 crewmembers per one year. For long orbital and interplanetary flights (without an opportunity of stocks updating) it is necessary to increase a degree of Life-Support System isolation and optimization of goods turnover. Washing combined with water regeneration system is most perspective for sanitary - hygienic procedures. Therefore, creation of space equipment for washing with sanitary - hygienic water (SHW) regeneration system is especially important. The researches have shown, that to processes, which can be applied for SHW regeneration in space conditions and require insignificant quantity of additional materials (as against sorption), concern membrane methods (reverse osmosis, nanofiltration etc.). Two-step membrane unit for SHW regeneration recovered no less than 85 % of permeate with the organic and inorganic selectivity of 82-95 %. The tests of two-step membrane unit for SHW regeneration carried out on mock up solutions and real SHW, containing detergents really used in space flight conditions. The researches on a substantiation of an opportunity of clothing washing, clothing drying and the estimation of an opportunity of application of various detergents for clothing washing are urgent. The tests of water extraction technology from textile materials are carried out. Is established, that at conditional time of contact 1s, humidity of a leaving air flow from clothing drying unit comes nearer to 100 %. It is necessary to solve the problem for creation of Life-Support System of new generation for long-term space flight conditions in view of an opportunity of integration of technologies, equipment and sanitary - hygienic supply means.

Development of a mobile device optimized cross platform-compatible oral pathology and radiology spaced repetition system for dental education.

PubMed

Al-Rawi, Wisam; Easterling, Lauren; Edwards, Paul C

2015-04-01

Combining active recall testing with spaced repetition increases memory retention. The aim of this study was to evaluate and compare students' perception and utilization of an electronic spaced repetition oral pathology-radiology system in dental hygiene education and predoctoral dental education. The study employed an open-source suite of applications to create electronic "flashcards" that can be individually adjusted for frequency of repetition, depending on a user's assessment of difficulty. Accessible across multiple platforms (iOS, Android, Linux, OSX, Windows) as well as via any web-based browser, this framework was used to develop an oral radiology-oral pathology database of case-based questions. This system was introduced in two courses: sophomore oral pathology for dental students and sophomore radiology for dental hygiene students. Students were provided free software and/or mobile tablet devices as well as a database of 300 electronic question cards. Study participants were surveyed on frequency and extent of use. Perception-based surveys were used to evaluate their attitudes towards this technology. Of the eligible students, 12 of 22 (54.5%) dental hygiene and 49 of 107 (45.8%) dental students responded to the surveys. Adoption rates and student feedback were compared between the two groups. Among the respondents, acceptance of this technology with respect to educational usefulness was similar for the dental and dental hygiene students (median=5 on a five-point scale; dental hygiene interquartile range (IQR)=0; dental IQR=1). Only a minority of the survey respondents (25% dental, 33% dental hygiene) took advantage of one of the main benefits of this technology: automated spaced repetition.

Industrial Orientation.

ERIC Educational Resources Information Center

Rasor, Leslie; Brooks, Valerie

These eight modules for an industrial orientation class were developed by a project to design an interdisciplinary program of basic skills training for disadvantaged students in a Construction Technology Program (see Note). The Drafting module overviews drafting career opportunities, job markets, salaries, educational requirements, and basic…

Modifying the Sleep Treatment Education Program for Students to include technology use (STEPS-TECH): Intervention effects on objective and subjective sleep outcomes.

PubMed

Barber, Larissa K; Cucalon, Maria S

2017-12-01

University students often have sleep issues that arise from poor sleep hygiene practices and technology use patterns. Yet, technology-related behaviors are often neglected in sleep hygiene education. This study examined whether the Sleep Treatment Education Program for Students-modified to include information regarding managing technology use (STEPS-TECH)-helps improve both subjective and objective sleep outcomes among university students. Results of an experimental study among 78 university students showed improvements in objective indicators of sleep quantity (total sleep time) and sleep quality (less awakenings) during the subsequent week for students in the STEPS-TECH intervention group compared to a control group. Exploratory analyses indicated that effects were driven by improvements in weekend days immediately following the intervention. There were also no intervention effects on subjective sleep quality or quantity outcomes. In terms of self-reported behavioral responses to educational content in the intervention, there were no group differences in sleep hygiene practices or technology use before bedtime. However, the intervention group reported less technology use during sleep periods than the control group. These preliminary findings suggest that STEPS-TECH may be a useful educational tool to help improve objective sleep and reduce technology use during sleep periods among university students. Copyright © 2017 John Wiley & Sons, Ltd.

Hand hygiene monitoring technology: protocol for a systematic review

PubMed Central

2013-01-01

Background Healthcare worker hand hygiene is thought to be one of the most important strategies to prevent healthcare-associated infections, but compliance is generally poor. Hand hygiene improvement interventions must include audits of compliance (almost always with feedback), which are most often done by direct observation - a method that is expensive, subjective, and prone to bias. New technologies, including electronic and video hand hygiene monitoring systems, have the potential to provide continuous and objective monitoring of hand hygiene, regular feedback, and for some systems, real-time reminders. We propose a systematic review of the evidence supporting the effectiveness of these systems. The primary objective is to determine whether hand hygiene monitoring systems yield sustainable improvements in hand hygiene compliance when compared to usual care. Methods/Design MEDLINE, EMBASE, CINAHL, and other relevant databases will be searched for randomized control studies and quasi-experimental studies evaluating a video or electronic hand hygiene monitoring system. A standard data collection form will be used to abstract relevant information from included studies. Bias will be assessed using the Cochrane Effective Practice and Organization of Care Group Risk of Bias Assessment Tool. Studies will be reviewed independently by two reviewers, with disputes resolved by a third reviewer. The primary outcome is directly observed hand hygiene compliance. Secondary outcomes include healthcare-associated infection incidence and improvements in hand hygiene compliance as measured by alternative metrics. Results will be qualitatively summarized with comparisons made between study quality, the measured outcome, and study-specific factors that may be expected to affect outcome (for example, study duration, frequency of feedback, use of real-time reminders). Meta-analysis will be performed if there is more than one study of similar systems with comparable outcome definitions. Discussion Electronic and video monitoring systems have the potential to improve hand hygiene compliance and prevent healthcare-associated infection, but are expensive, difficult to install and maintain, and may not be accepted by all healthcare workers. This review will assess the current evidence of effectiveness of these systems before their widespread adoption. Study registration PROSPERO registration number: CRD42013004519 PMID:24219817

Hand hygiene monitoring technology: protocol for a systematic review.

PubMed

Srigley, Jocelyn A; Lightfoot, David; Fernie, Geoff; Gardam, Michael; Muller, Matthew P

2013-11-12

Healthcare worker hand hygiene is thought to be one of the most important strategies to prevent healthcare-associated infections, but compliance is generally poor. Hand hygiene improvement interventions must include audits of compliance (almost always with feedback), which are most often done by direct observation - a method that is expensive, subjective, and prone to bias. New technologies, including electronic and video hand hygiene monitoring systems, have the potential to provide continuous and objective monitoring of hand hygiene, regular feedback, and for some systems, real-time reminders. We propose a systematic review of the evidence supporting the effectiveness of these systems. The primary objective is to determine whether hand hygiene monitoring systems yield sustainable improvements in hand hygiene compliance when compared to usual care. MEDLINE, EMBASE, CINAHL, and other relevant databases will be searched for randomized control studies and quasi-experimental studies evaluating a video or electronic hand hygiene monitoring system. A standard data collection form will be used to abstract relevant information from included studies. Bias will be assessed using the Cochrane Effective Practice and Organization of Care Group Risk of Bias Assessment Tool. Studies will be reviewed independently by two reviewers, with disputes resolved by a third reviewer. The primary outcome is directly observed hand hygiene compliance. Secondary outcomes include healthcare-associated infection incidence and improvements in hand hygiene compliance as measured by alternative metrics. Results will be qualitatively summarized with comparisons made between study quality, the measured outcome, and study-specific factors that may be expected to affect outcome (for example, study duration, frequency of feedback, use of real-time reminders). Meta-analysis will be performed if there is more than one study of similar systems with comparable outcome definitions. Electronic and video monitoring systems have the potential to improve hand hygiene compliance and prevent healthcare-associated infection, but are expensive, difficult to install and maintain, and may not be accepted by all healthcare workers. This review will assess the current evidence of effectiveness of these systems before their widespread adoption. PROSPERO registration number: CRD42013004519.

Industrial Hygiene Technologist Model. Final Report.

ERIC Educational Resources Information Center

Joliet Junior Coll., IL.

A project revised the existing Occupational Safety Program at Joliet Junior College (JJC) to indicate an AAS degree option in Industrial Hygiene Technology (IHT). Its objectives were to (1) utilize, where possible, existing courses within the college's curricula; (2) align the structure of the proposed curriculum with accreditation/certification…

Training infection control and hospital hygiene professionals in Europe, 2010: agreed core competencies among 33 European countries.

PubMed

Brusaferro, S; Cookson, B; Kalenic, S; Cooper, T; Fabry, J; Gallagher, R; Hartemann, P; Mannerquist, K; Popp, W; Privitera, G; Ruef, C; Viale, P; Coiz, F; Fabbro, E; Suetens, C; Varela Santos, C

2014-12-11

The harmonisation of training programmes for infection control and hospital hygiene (IC/HH) professionals in Europe is a requirement of the Council recommendation on patient safety. The European Centre for Disease Prevention and Control commissioned the 'Training Infection Control in Europe' project to develop a consensus on core competencies for IC/HH professionals in the European Union (EU). Core competencies were drafted on the basis of the Improving Patient Safety in Europe (IPSE) project's core curriculum (CC), evaluated by questionnaire and approved by National Representatives (NRs) for IC/HH training. NRs also re-assessed the status of IC/HH training in European countries in 2010 in comparison with the situation before the IPSE CC in 2006. The IPSE CC had been used to develop or update 28 of 51 IC/HH courses. Only 10 of 33 countries offered training and qualification for IC/HH doctors and nurses. The proposed core competencies are structured in four areas and 16 professional tasks at junior and senior level. They form a reference for standardisation of IC/HH professional competencies and support recognition of training initiatives.

Fiscal year 1981 US corn and soybeans pilot preliminary experiment plan, phase 1

NASA Technical Reports Server (NTRS)

Livingston, G. P.; Nedelman, K. S.; Norwood, D. F.; Smith, J. H. (Principal Investigator)

1981-01-01

A draft of the preliminary experiment plan for the foreign commodity production forecasting project fiscal year 1981 is presented. This draft plan includes: definition of the phase 1 and 2 U.S. pilot objectives; the proposed experiment design to evaluate crop calendar, area estimation, and area aggregation components for corn and soybean technologies using 1978/1979 crop-year data; a description of individual sensitivity evaluations of the baseline corn and soybean segment classification procedure; and technology and data assessment in support of the corn and soybean estimation technology for use in the U.S. central corn belt.

Hygiene guideline for the planning, installation, and operation of ventilation and air-conditioning systems in health-care settings - Guideline of the German Society for Hospital Hygiene (DGKH).

PubMed

Külpmann, Rüdiger; Christiansen, Bärbel; Kramer, Axel; Lüderitz, Peter; Pitten, Frank-Albert; Wille, Frank; Zastrow, Klaus-Dieter; Lemm, Friederike; Sommer, Regina; Halabi, Milo

2016-01-01

Since the publication of the first "Hospital Hygiene Guideline for the implementation and operation of air conditioning systems (HVAC systems) in hospitals" (http://www.krankenhaushygiene.de/informationen/fachinformationen/leitlinien/12) in 2002, it was necessary due to the increase in knowledge, new regulations, improved air-conditioning systems and advanced test methods to revise the guideline. Based on the description of the basic features of ventilation concepts, its hygienic test and the usage-based requirements for ventilation, the DGKH section "Ventilation and air conditioning technology" attempts to provide answers for the major air quality issues in the planning, design and the hygienically safe operation of HVAC systems in rooms of health care.

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2012 CFR

2012-10-01

..., preveterinary medicine, or prepodiatry curriculum or equivalent. (b) Students enrolled in accredited health..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology...

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2013 CFR

2013-10-01

..., preveterinary medicine, or prepodiatry curriculum or equivalent. (b) Students enrolled in accredited health..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology...

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., preveterinary medicine, or prepodiatry curriculum or equivalent. (b) Students enrolled in accredited health..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology...

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2014 CFR

2014-10-01

..., preveterinary medicine, or prepodiatry curriculum or equivalent. (b) Students enrolled in accredited health..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology...

77 FR 24722 - Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-25

...] Draft Guidance for Industry: Assessing the Effects of Significant Manufacturing Process Changes... Substances, Including Food Ingredients That Are Color Additives; Availability AGENCY: Food and Drug... Manufacturing Process Changes, Including Emerging Technologies, on the Safety and Regulatory Status of Food...

Flow characteristics of an inclined air-curtain range hood in a draft

PubMed Central

CHEN, Jia-Kun

2015-01-01

The inclined air-curtain technology was applied to build an inclined air-curtain range hood. A draft generator was applied to affect the inclined air-curtain range hood in three directions: lateral (θ=0°), oblique (θ=45°), and front (θ=90°). The three suction flow rates provided by the inclined air-curtain range hood were 10.1, 10.9, and 12.6 m3/min. The laser-assisted flow visualization technique and the tracer-gas test method were used to investigate the performance of the range hood under the influence of a draft. The results show that the inclined air-curtain range hood has a strong ability to resist the negative effect of a front draft until the draft velocity is greater than 0.5 m/s. The oblique draft affected the containment ability of the inclined air-curtain range hood when the draft velocity was larger than 0.3 m/s. When the lateral draft effect was applied, the capture efficiency of the inclined air-curtain range hood decreased quickly in the draft velocity from 0.2 m/s to 0.3 m/s. However, the capture efficiencies of the inclined air-curtain range hood under the influence of the front draft were higher than those under the influence of the oblique draft from 0.3 m/s to 0.5 m/s. PMID:25810445

Flow characteristics of an inclined air-curtain range hood in a draft.

PubMed

Chen, Jia-Kun

2015-01-01

The inclined air-curtain technology was applied to build an inclined air-curtain range hood. A draft generator was applied to affect the inclined air-curtain range hood in three directions: lateral (θ=0°), oblique (θ=45°), and front (θ=90°). The three suction flow rates provided by the inclined air-curtain range hood were 10.1, 10.9, and 12.6 m(3)/min. The laser-assisted flow visualization technique and the tracer-gas test method were used to investigate the performance of the range hood under the influence of a draft. The results show that the inclined air-curtain range hood has a strong ability to resist the negative effect of a front draft until the draft velocity is greater than 0.5 m/s. The oblique draft affected the containment ability of the inclined air-curtain range hood when the draft velocity was larger than 0.3 m/s. When the lateral draft effect was applied, the capture efficiency of the inclined air-curtain range hood decreased quickly in the draft velocity from 0.2 m/s to 0.3 m/s. However, the capture efficiencies of the inclined air-curtain range hood under the influence of the front draft were higher than those under the influence of the oblique draft from 0.3 m/s to 0.5 m/s.

Promoting Hand Hygiene With a Lighting Prompt.

PubMed

Diegel-Vacek, Lauren; Ryan, Catherine

2016-10-01

The objective of this pilot study was to assess an automatic sink light design intervention as a prompt for clinician hand hygiene (as defined by World Health Organization [WHO]). Healthcare-associated infections (HAIs) are still leading causes of morbidity and mortality and contribute to burdens on our healthcare system. Hand hygiene has been related to reducing the rate of HAIs and positively impacting both patient and hospital outcomes. This pilot study was a prospective, longitudinal observational study of a convenience sample of healthcare clinicians. In one inpatient room, clinicians were exposed to a hand hygiene reminder that consisted of a light turning on over the sink as they entered. A control room (the adjacent inpatient room) did not have the intervention. A total of 88 clinician encounters were monitored during the study. On the first observation day at the initial activation of the signal light system, the percentage of clinicians performing hand hygiene upon entering a room was only 7% in the control room and 23% in the intervention room. During the second observation (Day 14), those percentages were 16% in the control room and 30% in the intervention room. During the third observation (Day 21), those percentages were 23% in the control room and 23% in the intervention room. The healthcare system frequently relies on expensive technology to improve healthcare delivery, but implementation of low-cost, low-technology methods such as this light may be effective in prompting hand hygiene. © The Author(s) 2016.

Government Information Locator Service (GILS). Draft report to the Information Infrastructure Task Force

NASA Technical Reports Server (NTRS)

1994-01-01

This is a draft report on the Government Information Locator Service (GILS) to the National Information Infrastructure (NII) task force. GILS is designed to take advantage of internetworking technology known as client-server architecture which allows information to be distributed among multiple independent information servers. Two appendices are provided -- (1) A glossary of related terminology and (2) extracts from a draft GILS profile for the use of the American National Standard Information Retrieval Application Service Definition and Protocol Specification for Library Applications.

75 FR 67149 - Request for Public Comment on the Draft 2010 National Nanotechnology Initiative Strategic Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-01

... Nanotechnology Initiative Strategic Plan AGENCY: White House Office of Science and Technology Policy. ACTION... Nanotechnology Initiative (NNI) Strategic Plan. The draft plan is posted at http://strategy.nano.gov . Comments... information. Overview: The National Nanotechnology Initiative (NNI) Strategic Plan is the framework that...

A GUIDE FOR USE IN DEVELOPING TRAINING PROGRAMS IN DRAFTING AND DESIGN TECHNOLOGY.

ERIC Educational Resources Information Center

Mississippi State Dept. of Education, Jackson.

INITIAL COURSE OUTLINES WERE PREPARED BY INSTRUCTORS. INDIVIDUAL COURSES WERE THEN EXPANDED AND COORDINATED WITH OTHER COURSES. THE CURRICULUM LABORATORY STAFF REORGANIZED AND EDITED THE MATERIAL. A COMMITTEE OF INDUSTRIAL REPRESENTATIVES REVIEWED AND PERSONALLY ENDORSED IT AS BEING APPROPRIATE AND ADEQUATE FOR TRAINING DRAFTING AND DESIGN…

Airbrush Technology.

ERIC Educational Resources Information Center

Micklus, C. Samuel

To supplement and extend the offerings in the fields of industrial arts and vocational education, instructions in the use of the airbrush in design oriented activities are presented in this manual. It is written for and directed to the following types of programs: (1) high school--drafting, graphic arts; (2) vocational school--drafting, commercial…

Industrial Hygiene Technology: A Curriculum Planning Resource Guide.

ERIC Educational Resources Information Center

Heath, Walter D.; Spetz, Sally H.

This curriculum resource guide, one of seven developed by the State of Illinois to present information on new and emerging curricula existing in the nation, can be used as a basis for local educators to determine the resources needed to offer industrial hygiene technician curricula and to initiate curriculum development at the local level.…

Two-Year ET Programs: Essential Topics and Levels of Proficiency.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

1990-01-01

Reports the results of a survey of graduates, employers, and instructors of engineering technology programs for the essential topics in mechanical engineering technology, mechanical drafting/design technology, manufacturing engineering technology, and industrial engineering technology. Identifies the proficiency level suggested for classwork and…

75 FR 29357 - Notice of Availability of the Draft Programmatic Environmental Assessment for the Deployment and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-25

... technology that is used to aid in inspecting high-density cargo containers for contraband such as illicit... DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Notice of Availability of the Draft Programmatic Environmental Assessment for the Deployment and Operation of High Energy X-Ray...

Computer Aided Design: Instructional Manual. The North Dakota High Technology Mobile Laboratory Project.

ERIC Educational Resources Information Center

Cheng, Wan-Lee

This instructional manual contains 12 learning activity packets for use in a workshop in computer-aided design and drafting (CADD). The lessons cover the following topics: introduction to computer graphics and computer-aided design/drafting; coordinate systems; advance space graphics hardware configuration and basic features of the IBM PC…

77 FR 21538 - Announcing DRAFT Revisions to Federal Information Processing Standard (FIPS) 186-3, Digital...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-10

... Technology (NIST) requests comments on revisions to Federal Information Processing Standard (FIPS) 186-3... http://csrc.nist.gov/publications/PubsDrafts.html . DATES: Comments must be received on or before [email protected]nist.gov , with ``186-3 Change Notice'' in the subject line. FOR FURTHER...

Knowledge-based systems in Japan

NASA Technical Reports Server (NTRS)

Feigenbaum, Edward; Engelmore, Robert S.; Friedland, Peter E.; Johnson, Bruce B.; Nii, H. Penny; Schorr, Herbert; Shrobe, Howard

1994-01-01

This report summarizes a study of the state-of-the-art in knowledge-based systems technology in Japan, organized by the Japanese Technology Evaluation Center (JTEC) under the sponsorship of the National Science Foundation and the Advanced Research Projects Agency. The panel visited 19 Japanese sites in March 1992. Based on these site visits plus other interactions with Japanese organizations, both before and after the site visits, the panel prepared a draft final report. JTEC sent the draft to the host organizations for their review. The final report was published in May 1993.

75 FR 57521 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-21

... NATIONAL SCIENCE FOUNDATION Networking and Information Technology Research and Development (NITRD...) for Networking and Information Technology Research and Development (NITRD). ACTION: Notice, request.... SUMMARY: With this notice, the National Coordination Office for Networking and Information Technology...

75 FR 55360 - Networking and Information Technology Research and Development (NITRD) Program: Draft NITRD 2010...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-10

... NATIONAL SCIENCE FOUNDATION Networking and Information Technology Research and Development (NITRD... Information Technology Research and Development (NITRD). ACTION: Notice, request for public comment. FOR..., the National Coordination Office for Networking and Information Technology Research and Development...

Problems of equipment creation for hygienic treatment of textiles (underwear, garments, hygienic towels and napkins) for long-term space missions

NASA Astrophysics Data System (ADS)

Shumilina, I.

Impossibility of just in time stocks delivery to the International Space Station ISS because of Shuttle space flights absence has led to forced changing of standards of underwear garments and personal hygiene means using Therefore hygienic treatment of textiles underwear garments towels and napkins are necessary for long-term space flight missions Investigations into the ways of cosmonauts sanitary -- hygienic supply are prepared The resent equipment means and methods of cosmonauts sanitary -- hygienic supply were created for space flight conditions with an opportunity of stocks updating This investigations are confirm necessity of new generation system creation for cosmonauts sanitary -- hygienic supply and special designing of hygienic treatment laundry drying equipment and technologies for long-term space flights without an opportunity of stocks updating in particular for martian mission One from main requirements for equipment means and methods of cosmonauts sanitary -- hygienic supply is full safety for human organisms under systematic and long-term application in space flight conditions small energy consumption and combining with space Life-Support Systems Method and program of experimental investigations of textiles laundry with application of washing means for long-term space flight conditions are prepared It is necessary to estimate opportunity and efficiency of washing means application for textiles laundry for space flight missions also to estimate compatibility of washing means for textiles laundry and for washing

[ACTUAL PROBLEMS OF HYGIENE SCIENCE AND PRACTICE IN THE PRESERVATION OF PUBLIC HEALTH].

PubMed

Onishchenko, G G

2015-01-01

In the article there are designated the state and actual hygiene tasks on the issue of environmental pollution and its effects on health of the population. There was emphasized the growing importance of chemical contamination of various objects of environment--air water, soil, and living environment. There is presented the analysis of data on different types of treatment of municipal waste in selected countries. There were shown the significance of the developed Guidance on risk assessmentfor public health as a toolfor making sound management decisions, prospects of using of the methodology of epidemiological mapping based on geoinformational technology (GIS technology). There was marked an important role of the younger generation of hygienists and health officers in further work on both preservation and improvement the health of the population in their countries, harmonization of scientific and practical solutions of actual problems of hygiene.

78 FR 72641 - Request for Public Comments on Draft Final Report on the Technical Investigation of the May 22...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-03

..., 2011 Tornado in Joplin, Missouri AGENCY: National Institute of Standards and Technology, United States... for public comment of the draft final report of the investigation conducted by NIST into the tornado... found on the Joplin Investigation Web page http://www.nist.gov/el/disasterstudies/weather/joplin_tornado...

Draft Genome Sequence of “Cohnella kolymensis” B-2846

PubMed Central

Kudryashova, Ekaterina B.; Ariskina, Elena V.

2016-01-01

A draft genome sequence of “Cohnella kolymensis” strain B-2846 was derived using IonTorrent sequencing technology. The size of the assembly and G+C content were in agreement with those of other species of this genus. Characterization of the genome of a novel species of Cohnella will assist in bacterial systematics. PMID:26769947

2005 Mississippi Curriculum Framework: Secondary General Drafting. (Program CIP: 15.1301 - Drafting and Design Technology/Technician, General)

ERIC Educational Resources Information Center

Kirk, Karen; Ladner, Daryl; Lewis, Carroll; Moran, Sheryl; Schneider, Chester; Strickland, Ruth Ann; Welch, Amanda

2005-01-01

Secondary vocational-technical education programs in Mississippi are faced with many challenges resulting from sweeping educational reforms at the national and state levels. Schools and teachers are increasingly being held accountable for providing true learning activities to every student in the classroom. This accountability is measured through…

76 FR 13396 - Notice of Availability of the Draft Environmental Impact Statement for the Mountaineer Commercial...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-11

... deep saline geologic formations for permanent geologic storage. DATES: DOE invites the public to...; or by fax (304) 285-4403. The Draft EIS is available on DOE's NEPA Web page at: http://nepa.energy.gov/DOE_NEPA_documents.htm ; and on the National Energy Technology Laboratory's Web page at: http...

Conceptual designs and cost estimates of mechanical draft wet/dry and natural draft dry cooling systems using Curtiss-Wright integral fin-tube heat exchangers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Haberski, R.J.; Bentz, J.C.

1979-04-01

This study was performed to establish a conceptual design and cost evaluation of an advanced technology mechanical draft wet/dry and natural draft dry cooling systems for large electric power plants using a high performance integral fin-tube heat transfer surface. This study was part of an overall DOE program to develop and demonstrate advanced concept cooling systems for large electric power plants. The results obtained show significant economic advantages compared to results previously published for conventional cooling systems. These advantages are due to the higher heat transfer and lower pressure loss which occur with the use of the selected multi-port integralmore » fin-tubes.« less

[Provision of integrity and reliability in hygienic examination of investment projects for human capital development].

PubMed

Tarkhov, P V; Matsenko, A M; Krugliak, A P; Derkach, Zh V

2012-01-01

To reach normal competitiveness in world division of labour, investment projects should stimulate development of human capital towards advance of modern technologies and organizational development of all types of labour. At present time there are only separate calculations of certain types of people's health damage and completely disparate matters of damage compensation exceptionally for chemical contamination effects. The purpose of the paper is development of algorithms to provide hygienic welfare of human capital in investment projects. For this purpose in investments assessment and hygienic examination it is necessary to apply complete and comprehensive (systematic) evaluation of all factors that influence human capital welfare and practical hygienic and research institutions should be focused on systematic elimination of possible dangers and risks of investment projects.

42 CFR 136.370 - Pregraduate scholarship grants.

Code of Federal Regulations, 2010 CFR

2010-10-01

... education leading to a baccalaureate degree in a premedicine, preoptometry, predentistry, preosteopathy..., audiology, medical technology, dental hygiene, dental technicians, engineering, radiologic technology, dietitian, nutritionist, social work, health education, physical therapy, occupational therapy and pharmacy...

Protocol for a cluster randomised stepped wedge trial assessing the impact of a community-level hygiene intervention and a water intervention using riverbank filtration technology on diarrhoeal prevalence in India

PubMed Central

McGuinness, Sarah L; O'Toole, Joanne E; Boving, Thomas B; Forbes, Andrew B; Sinclair, Martha; Gautam, Sumit K; Leder, Karin

2017-01-01

Introduction Diarrhoea is a leading cause of death globally, mostly occurring as a result of insufficient or unsafe water supplies, inadequate sanitation and poor hygiene. Our study aims to investigate the impact of a community-level hygiene education program and a water quality intervention using riverbank filtration (RBF) technology on diarrhoeal prevalence. Methods and analysis We have designed a stepped wedge cluster randomised trial to estimate the health impacts of our intervention in 4 rural villages in Karnataka, India. At baseline, surveys will be conducted in all villages, and householders will receive hygiene education. New pipelines, water storage tanks and taps will then be installed at accessible locations in each village and untreated piped river water will be supplied. A subsequent survey will evaluate the impact of hygiene education combined with improved access to greater water volumes for hygiene and drinking purposes (improved water quantity). Villages will then be randomly ordered and RBF-treated water (improved water quality) will be sequentially introduced into the 4 villages in a stepwise manner, with administration of surveys at each time point. The primary outcome is a 7-day period prevalence of self-reported diarrhoea. Secondary outcomes include self-reported respiratory and skin infections, and reported changes in hygiene practices, household water usage and water supply preference. River, tank and tap water from each village, and stored water from a subset of households, will be sampled to assess microbial and chemical quality. Ethics and dissemination Ethics approval was obtained from the Monash University Human Research Ethics Committee in Australia and The Energy and Resources Institute Institutional Ethics Committee in India. The results of the trial will be presented at conferences, published in peer-reviewed journals and disseminated to relevant stakeholders. This study is funded by an Australian National Health and Medical Research Council (NHMRC) project grant. Trial registration number ACTRN12616001286437; pre-results. PMID:28314746

SSPACE-LongRead: scaffolding bacterial draft genomes using long read sequence information

PubMed Central

2014-01-01

Background The recent introduction of the Pacific Biosciences RS single molecule sequencing technology has opened new doors to scaffolding genome assemblies in a cost-effective manner. The long read sequence information is promised to enhance the quality of incomplete and inaccurate draft assemblies constructed from Next Generation Sequencing (NGS) data. Results Here we propose a novel hybrid assembly methodology that aims to scaffold pre-assembled contigs in an iterative manner using PacBio RS long read information as a backbone. On a test set comprising six bacterial draft genomes, assembled using either a single Illumina MiSeq or Roche 454 library, we show that even a 50× coverage of uncorrected PacBio RS long reads is sufficient to drastically reduce the number of contigs. Comparisons to the AHA scaffolder indicate our strategy is better capable of producing (nearly) complete bacterial genomes. Conclusions The current work describes our SSPACE-LongRead software which is designed to upgrade incomplete draft genomes using single molecule sequences. We conclude that the recent advances of the PacBio sequencing technology and chemistry, in combination with the limited computational resources required to run our program, allow to scaffold genomes in a fast and reliable manner. PMID:24950923

Divergent opinions on surface disinfection: myths or prevention? A review of the literature

PubMed Central

Exner, Martin

2007-01-01

Virtually no prevention strategy in hospital hygiene has been the focus of such frequent controversial discussions as the role of surface disinfection. Set against that background, the Commission for Hospital Hygiene and Infection Prevention at the Robert Koch Institute founded a working group comprising members with divergent views of risk evaluation as regards the role of disinfection. This working group produced a most carefully drafted guideline on how to deal with various risk areas and also incorporated a new provision into the guideline, stating that: “Cleaning and disinfection procedures must be organized and implemented such that there is no increase in the microbial load or spread of facultatively pathogenic or pathogenic microorganisms on surfaces.” Numerous studies have come to the conclusion that surface disinfection constitutes a basic infection control measure with which the spread of pathogens can be controlled. Conversely, when using only detergents such a form of control is not possible, something that must be taken into account in future when engaging in risk evaluation and formulating infection control measures. In view of the burgeoning trend in, for example, norovirus outbreaks, also in hospitals and nursing homes, such insights are of paramount importance and attest to the need for disinfection of surfaces and of areas with frequent hand and skin contacts. This discussion about the need for surface disinfection has, in addition to causing confusion among users, led to a decline in the willingness to accept hygienic practices, thus increasing the risk of occurrence of nosocomial infections as well as of antibiotic-resistant microorganisms. PMID:20200680

Divergent opinions on surface disinfection: myths or prevention? A review of the literature.

PubMed

Exner, Martin

2007-09-13

Virtually no prevention strategy in hospital hygiene has been the focus of such frequent controversial discussions as the role of surface disinfection. Set against that background, the Commission for Hospital Hygiene and Infection Prevention at the Robert Koch Institute founded a working group comprising members with divergent views of risk evaluation as regards the role of disinfection. This working group produced a most carefully drafted guideline on how to deal with various risk areas and also incorporated a new provision into the guideline, stating that: "Cleaning and disinfection procedures must be organized and implemented such that there is no increase in the microbial load or spread of facultatively pathogenic or pathogenic microorganisms on surfaces."Numerous studies have come to the conclusion that surface disinfection constitutes a basic infection control measure with which the spread of pathogens can be controlled. Conversely, when using only detergents such a form of control is not possible, something that must be taken into account in future when engaging in risk evaluation and formulating infection control measures. In view of the burgeoning trend in, for example, norovirus outbreaks, also in hospitals and nursing homes, such insights are of paramount importance and attest to the need for disinfection of surfaces and of areas with frequent hand and skin contacts. This discussion about the need for surface disinfection has, in addition to causing confusion among users, led to a decline in the willingness to accept hygienic practices, thus increasing the risk of occurrence of nosocomial infections as well as of antibiotic-resistant microorganisms.

Routine hand hygiene audit by direct observation: has nemesis arrived?

PubMed

Gould, D J; Drey, N S; Creedon, S

2011-04-01

Infection prevention and control experts have expended valuable health service time developing and implementing tools to audit health workers' hand hygiene compliance by direct observation. Although described as the 'gold standard' approach to hand hygiene audit, this method is labour intensive and may be inaccurate unless performed by trained personnel who are regularly monitored to ensure quality control. New technological devices have been developed to generate 'real time' data, but the cost of installing them and using them during routine patient care has not been evaluated. Moreover, they do not provide as much information about the hand hygiene episode or the context in which hand hygiene has been performed as direct observation. Uptake of hand hygiene products offers an inexpensive alternative to direct observation. Although product uptake would not provide detailed information about the hand hygiene episode or local barriers to compliance, it could be used as a continuous monitoring tool. Regular inspection of the data by infection prevention and control teams and clinical staff would indicate when and where direct investigation of practice by direct observation and questioning of staff should be targeted by highly trained personnel to identify local problems and improve practice. Copyright © 2011 the Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

Technology is a critical game changer to the practice of dental hygiene.

PubMed

Gadbury-Amyot, Cynthia C

2014-06-01

Dental hygienists will need to embrace 21st century technology to adapt to workplace settings. To stay relevant in the workforce, dental hygienists need mastery of new skills and technologies. The purpose of this paper is to elucidate the vast array of technological advances impacting dental practice and the consequent implications for oral health care providers. New technologies have provided unparalleled opportunities for degree and career advancement for dental hygienists. Advances in science and technology are providing patients with better quality and more convenient oral health care. Dental hygienists need technological skills that enable them to fully utilize technology as a strategy for consultation with dentists and other health care professionals and for other purposes. Continuing education and life-long learning factor into preparing dental hygienists for 21st century technologies. With technological advances, less adaptive professionals could potentially see a decrease in demand for their services. Possessing a high level of knowledge of dentistry and dental hygiene does not ensure a position in the workforce. Knowledge of technologies and associated skills are required for quality patient care and career and personal growth. Copyright © 2014 Elsevier Inc. All rights reserved.

78 FR 69462 - National Nanotechnology Initiative Strategic Plan; National Science and Technology Council...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-19

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY OFFICE National Nanotechnology Initiative Strategic Plan; National Science and Technology Council; National Nanotechnology Coordination Office AGENCY: Executive... Nanotechnology Initiative (NNI) Strategic Plan. The draft plan will be posted at www.nano.gov/2014strategy...

Related Skills in the Marketplace. Final Report.

ERIC Educational Resources Information Center

John C. Calhoun State Community Coll., Decatur, AL.

A study identified related skills needed in five diploma programs offered in the Technical Division of John C. Calhoun State Community College in Decatur, Alabama. The programs were automotive technology, refrigeration/air conditioning, electrical technology, design drafting technology, and cosmetology. Thirty-five area businesses and industries…

NASA Technology Area 1: Launch Propulsion Systems

NASA Technical Reports Server (NTRS)

McConnaughey, Paul; Femminineo, Mark; Koelfgen, Syri; Lepsch, Roger; Ryan, Richard M.; Taylor, Steven A.

2011-01-01

This slide presentation reviews the technology advancements plans for the NASA Technology Area 1, Launch Propulsion Systems Technology Area (LPSTA). The draft roadmap reviews various propulsion system technologies that will be developed during the next 25 + years. This roadmap will be reviewed by the National Research Council which will issue a final report, that will include findings and recommendations.

An Emerging Technology Curriculum. Education for Technology Employment Project. Final Report.

ERIC Educational Resources Information Center

Harms, Dan; And Others

Individualized, competency-based curriculum materials were developed for a course on Principles of Technology, Units 1-6. New and updated curriculum materials in Drafting and Electronics and the Principles of Technology units were pilot tested in area vocational center settings in Illinois. A computer maintenance program was also developed but not…

Assessment of Knowledge and Skills Needed in Selected Engineering Technician Fields: Mechanical/Manufacturing/Industrial.

ERIC Educational Resources Information Center

Gourley, Frank A., Jr.

A study identified the essential educational topics and the level of proficiency perceived to be required in these topics for selected two-year engineering technology programs in North Carolina. The four curricula studied were mechanical engineering technology, mechanical drafting and design technology, manufacturing engineering technology, and…

"Taking Women One Step Further..." Women in Technology. End of Year Report, July '93-June '94.

ERIC Educational Resources Information Center

El Paso Community Coll., TX.

The primary purpose of El Paso Community College's (EPCC's) Women in Technology (WIT) Program is to recruit women into nontraditional occupations through technical/vocational education and training. Credit training areas include automotive technology, drafting, electronics, fire technology, heating/ventilation and air conditioning, and welding.…

Start Later, Sleep Later: School Start Times and Adolescent Sleep in Homeschool Versus Public/Private School Students.

PubMed

Meltzer, Lisa J; Shaheed, Keisha; Ambler, Devon

2016-01-01

Homeschooled students provide a naturalistic comparison group for later/flexible school start times. This study compared sleep patterns and sleep hygiene for homeschooled students and public/private school students (grades 6-12). Public/private school students (n = 245) and homeschooled students (n = 162) completed a survey about sleep patterns and sleep hygiene. Significant school group differences were found for weekday bedtime, wake time, and total sleep time, with homeschooled students waking later and obtaining more sleep. Homeschooled students had later school start times, waking at the same time that public/private school students were starting school. Public/private school students had poorer sleep hygiene practices, reporting more homework and use of technology in the hour before bed. Regardless of school type, technology in the bedroom was associated with shorter sleep duration. Later school start times may be a potential countermeasure for insufficient sleep in adolescents. Future studies should further examine the relationship between school start times and daytime outcomes, including academic performance, mood, and health.

The Development of Statistics Textbook Supported with ICT and Portfolio-Based Assessment

NASA Astrophysics Data System (ADS)

Hendikawati, Putriaji; Yuni Arini, Florentina

2016-02-01

This research was development research that aimed to develop and produce a Statistics textbook model that supported with information and communication technology (ICT) and Portfolio-Based Assessment. This book was designed for students of mathematics at the college to improve students’ ability in mathematical connection and communication. There were three stages in this research i.e. define, design, and develop. The textbooks consisted of 10 chapters which each chapter contains introduction, core materials and include examples and exercises. The textbook developed phase begins with the early stages of designed the book (draft 1) which then validated by experts. Revision of draft 1 produced draft 2 which then limited test for readability test book. Furthermore, revision of draft 2 produced textbook draft 3 which simulated on a small sample to produce a valid model textbook. The data were analysed with descriptive statistics. The analysis showed that the Statistics textbook model that supported with ICT and Portfolio-Based Assessment valid and fill up the criteria of practicality.

Reflective blogs in clinical education to promote critical thinking in dental hygiene students.

PubMed

Wetmore, Ann O'Kelley; Boyd, Linda D; Bowen, Denise M; Pattillo, Robin E

2010-12-01

One challenge facing dental hygiene, as well as dental, education is to identify clinical teaching strategies promoting critical thinking and clinical reasoning. These skills are crucial elements in the practice of dental hygiene. A two-group design (intervention, n=28, and control, n=30) assessed first-year dental hygiene students using pre-and post-Health Science Reasoning Test (HSRT) scores to evaluate the effect of reflective blogging on critical thinking skills. A reflective blog rubric, based on Mezirow's levels of reflection, determined if reflective blogging increased the level of reflection for dental hygiene students. The results suggest within this nonprobability sample that reflective blogging did not produce a significant change in students' HSRT scores (p>0.05). However, analyses of reflective blog rubric scores demonstrated statistically significant improvements (p<0.05) in students' levels of reflection. Furthermore, data analysis revealed a correlation (p<0.05) between HSRT subscale scores and the element of reflection scores for the intervention group. This study addressed needs of the dental and dental hygiene education community by examining the use of blogs, an emerging technology, as a tool for reflecting on clinical experiences and, in turn, for promoting critical thinking.

The development and implementation of an online applied biochemistry bridge course for a dental hygiene curriculum.

PubMed

Gadbury-Amyot, Cynthia C; Overman, Pamela R; Crain, Geralyn

2009-01-01

This article describes a curricular change project designed to improve instruction in biochemistry. After years of unsatisfactory outcomes from a dental hygiene biochemistry course, a decision was made to change the traditional lecture-based course to an online format. Using online technology and principles of educational pedagogy, a course was developed that fosters application of biomaterials principles to dental hygiene practice and provides a bridge between prerequisite chemistry coursework and biochemistry in a health professions program. Members of the dental hygiene graduating Classes of 2007 and 2008 participated in the revised course. The outcome measures used to assess the effectiveness of the revised course were student end-of-semester course evaluations, graduating senior survey results, student course performance, and National Board examination performance. While the results are based on only two classes, the positive outcomes suggest that the revision was a worthwhile endeavor. The use of technology in teaching holds the potential for solving many of the curriculum and instruction issues currently under discussion: overcrowding of the curriculum, lack of active learning methods, and basic sciences taught in isolation from the rest of the curriculum. It is hoped that the results of this change will be helpful to other faculty members seeking curricular change and innovation.

Ocean research plan reviewed

NASA Astrophysics Data System (ADS)

Zielinski, Sarah

A draft plan setting out priorities for U.S. ocean research generally was lauded for its clear and well-articulated view in a recent report from a committee of the U.S. National Research Council (NRC) of the US. National Academies. However, the committee advised that the plan would benefit from a bold vision for the future of ocean science research, additional details, and a reorganization to include cross-cutting research.The draft "Charting the Course for Ocean Science in the United States: Research Priorities for the Next Decade" was made available for public comment in September 2006 by the U.S. National Science and Technology Council's Joint Subcommittee on Ocean Science and Technology.

[Embryos and embryo-like entities: problem of definition in the draft of the Swiss embryonic research law].

PubMed

Bürgin, M T; Bürkli, P

2002-11-01

At the end of May 2002, the draft of the Swiss "Federal Act on Research on Surplus Embryos and Embryonic Stem Cells" (EFG, Embryonic Research Act) reached the pre-legislative consultation stage. Under certain conditions, it would allow research on "surplus" embryos from in-vitro fertilization, and the derivation of embryonic stem cells from surplus embryos for research purposes. The EFG draft defines an embryo as "the developing organism from the point of nuclear fusion until the completion of organ development". New technological developments show that embryo-like entities can also be created without nuclear fusion having taken place. It remains unclear how to treat embryonic entities that don't fall under the draft's narrow definition of an embryo. Expanding this definition would be a welcome improvement.

Prospective technologies and equipment for sanitary hygienic measures for life support systems

NASA Astrophysics Data System (ADS)

Shumilina, I. V.

Creation of optimal sanitary hygienic conditions is a prerequisite for good health and performance of crews on extended space missions. There is a rich assortment of associated means, methods and equipment developed and experimentally tested in orbital flights. However, over a one-year period a crew of three uses up about 800 kg of ground-supplied wet wipes and towels for personal needs. The degree of closure of life support systems for long-duration orbital flights should be maximized, particularly for interplanetary missions, which exclude any possibility of re-supply. Washing with regenerated water is the ultimate sanitary hygienic goal. That is why it is so important to design devices for crew bathing during long-term space missions. Investigations showed that regeneration of wash water (WW) using membrane processes (reverse osmosis, nanofiltration etc.), unlike sorption, would not require much additional expendables. A two-stage membrane recovery unit eliminated >85% of permeate from real WW with organic and inorganic selectivity of 82 95%. The two-stage WW recovery unit was tested with artificial and real WW containing detergents available for space crews. Investigations into the ways of doing laundry and drying along with which detergents will be the best fit for space flight are also planned. Testing of a technology for water extraction from used textiles using a conventional period of contact of 1 s or more, showed that the humidity of the outgoing air flow neared 100%. Issues related to designing the next generation of space life support systems should consider the benefits of integrating new sanitary hygienic technologies, equipment, and methods.

Emerging Media in Engineering Technology: A Case Study in Higher Education

ERIC Educational Resources Information Center

Ostler, Karl B.

2013-01-01

Technical illustration, 3D modeling, and design drafting under the discipline of engineering technology face rapid change and advancements in technologies such that educational leaders must continually anticipate change and make intelligent choices in providing a quality educational experience to adult students. However, how successful program…

Extensive Error in the Number of Genes Inferred from Draft Genome Assemblies

PubMed Central

Denton, James F.; Lugo-Martinez, Jose; Tucker, Abraham E.; Schrider, Daniel R.; Warren, Wesley C.; Hahn, Matthew W.

2014-01-01

Current sequencing methods produce large amounts of data, but genome assemblies based on these data are often woefully incomplete. These incomplete and error-filled assemblies result in many annotation errors, especially in the number of genes present in a genome. In this paper we investigate the magnitude of the problem, both in terms of total gene number and the number of copies of genes in specific families. To do this, we compare multiple draft assemblies against higher-quality versions of the same genomes, using several new assemblies of the chicken genome based on both traditional and next-generation sequencing technologies, as well as published draft assemblies of chimpanzee. We find that upwards of 40% of all gene families are inferred to have the wrong number of genes in draft assemblies, and that these incorrect assemblies both add and subtract genes. Using simulated genome assemblies of Drosophila melanogaster, we find that the major cause of increased gene numbers in draft genomes is the fragmentation of genes onto multiple individual contigs. Finally, we demonstrate the usefulness of RNA-Seq in improving the gene annotation of draft assemblies, largely by connecting genes that have been fragmented in the assembly process. PMID:25474019

Extensive error in the number of genes inferred from draft genome assemblies.

PubMed

Denton, James F; Lugo-Martinez, Jose; Tucker, Abraham E; Schrider, Daniel R; Warren, Wesley C; Hahn, Matthew W

2014-12-01

Current sequencing methods produce large amounts of data, but genome assemblies based on these data are often woefully incomplete. These incomplete and error-filled assemblies result in many annotation errors, especially in the number of genes present in a genome. In this paper we investigate the magnitude of the problem, both in terms of total gene number and the number of copies of genes in specific families. To do this, we compare multiple draft assemblies against higher-quality versions of the same genomes, using several new assemblies of the chicken genome based on both traditional and next-generation sequencing technologies, as well as published draft assemblies of chimpanzee. We find that upwards of 40% of all gene families are inferred to have the wrong number of genes in draft assemblies, and that these incorrect assemblies both add and subtract genes. Using simulated genome assemblies of Drosophila melanogaster, we find that the major cause of increased gene numbers in draft genomes is the fragmentation of genes onto multiple individual contigs. Finally, we demonstrate the usefulness of RNA-Seq in improving the gene annotation of draft assemblies, largely by connecting genes that have been fragmented in the assembly process.

DOD Information Technology Standard Guidance (ITSG) Version 3.1

DTIC Science & Technology

1997-04-07

from NGSBs later (e.g., OSFs Motif specification became the basis for IEEE 1295 . 1). Most consortia specifications are available now, do not overlap...Illumination) CIM Center for Information Management (DISA) CINC Conumnder in Chief CIS CASE Integration Services CJCS Chairman of the Joint Chiefs of...Compound Text Encoding CUA Common User Access DAC Discretionary Access Controls DAD Draft Addendum (ISO) DAM Draft Amendment (ISO) DAP Document

Draft Genome Sequences of Five Neonatal Meningitis-Causing Escherichia coli Isolates (SP-4, SP-5, SP-13, SP-46, and SP-65)

PubMed Central

Xu, Aixia; Johnson, James R.; Sheen, Shiowshuh

2018-01-01

ABSTRACT Neonatal meningitis-causing Escherichia coli isolates (SP-4, SP-5, SP-13, SP-46, and SP-65) were recovered between 1989 and 1997 from infants in the Netherlands. Here, we report the draft genome sequences of these five E. coli isolates, which are currently being used to validate food safety processing technologies. PMID:29674529

Technology Assessment for External Implementation of Artificial Gravity Utilizing the Deep Space Gateway Platform

NASA Astrophysics Data System (ADS)

Raychev, R.; Griko, Y. V.

2018-02-01

Scenario drafting for early technology assessment of the external space centrifuge with little mass and variable radius of rotation is proposed to counteract micro gravity-associated physiological alterations in all physiological systems.

Hand hygiene in preventing nosocomial infections:a nursing research.

PubMed

Di Muzio, M; Cammilletti, V; Petrelli, E; Di Simone, E

2015-01-01

To verify whether there is some correlation between the nursing workload and the occurrence of healthcare-associated infections. An anonymous questionnaire made up of 20 items has been drafted for this specific purpose and delivered to a sample of 70 participants, including 33 nurses and 37 nursing students of a well-known University Hospital in Rome. The study is supported by extensive documental research, and a specific literature review. Hand hygiene is a mandatory daily practice, simple but critical, but not always clear enough for both nurses and students. The investigation demonstrated inconsistencies between nurses' and students' behaviour and what is recommended by the new WHO international guidelines. The documented correlation between the workload and the occurrence of healthcare-associated infections may be explained by the negative effect of nursing workload on correct hand-washing procedures. Out of the total sample, 58.6% answered affirmatively to both the presence of healthcare-associated infections within their unit and an excessive daily workload. Indeed, the remaining 41.4% of the sample do not report an excessive workload and states that "there are no healthcare-associated infections within their operational reality, at least not in the time period covered by the present investigation". Although limited to a small sample, this study may reveal that the correct practice of hand washing, prompted and considered fundamental by WHO, is still much underrated. Hand hygiene should be better understood and practiced in all healthcare facilities, through a series of interventions such as: specific training courses, the presence of a gel sanitizer next to each patient's bed or in each patient's room, as well as the adoption of the new international guidelines in all units. The analysis of other correlations found the presence of a protective factor (RR<1) regarding the replacement of gloves for each patient and the use of disinfectant gel, both related to the excessive workload and the presence of infections. In fact, we found no statistically significant values to support such considerations (p>0.05). The same considerations could be also inferred as far as the presence of gel dispensers and disposable wipes near hospital beds are concerned, for the distribution of information leaflets about proper hand hygiene and the frequency of updating courses declared by both nurses and nursing students. The quality of health care starts from the simplest things, such proper hand hygiene.

Protocol for a cluster randomised stepped wedge trial assessing the impact of a community-level hygiene intervention and a water intervention using riverbank filtration technology on diarrhoeal prevalence in India.

PubMed

McGuinness, Sarah L; O'Toole, Joanne E; Boving, Thomas B; Forbes, Andrew B; Sinclair, Martha; Gautam, Sumit K; Leder, Karin

2017-03-17

Diarrhoea is a leading cause of death globally, mostly occurring as a result of insufficient or unsafe water supplies, inadequate sanitation and poor hygiene. Our study aims to investigate the impact of a community-level hygiene education program and a water quality intervention using riverbank filtration (RBF) technology on diarrhoeal prevalence. We have designed a stepped wedge cluster randomised trial to estimate the health impacts of our intervention in 4 rural villages in Karnataka, India. At baseline, surveys will be conducted in all villages, and householders will receive hygiene education. New pipelines, water storage tanks and taps will then be installed at accessible locations in each village and untreated piped river water will be supplied. A subsequent survey will evaluate the impact of hygiene education combined with improved access to greater water volumes for hygiene and drinking purposes (improved water quantity). Villages will then be randomly ordered and RBF-treated water (improved water quality) will be sequentially introduced into the 4 villages in a stepwise manner, with administration of surveys at each time point. The primary outcome is a 7-day period prevalence of self-reported diarrhoea. Secondary outcomes include self-reported respiratory and skin infections, and reported changes in hygiene practices, household water usage and water supply preference. River, tank and tap water from each village, and stored water from a subset of households, will be sampled to assess microbial and chemical quality. Ethics approval was obtained from the Monash University Human Research Ethics Committee in Australia and The Energy and Resources Institute Institutional Ethics Committee in India. The results of the trial will be presented at conferences, published in peer-reviewed journals and disseminated to relevant stakeholders. This study is funded by an Australian National Health and Medical Research Council (NHMRC) project grant. ACTRN12616001286437; pre-results. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

75 FR 81284 - Nationwide Use of High Frequency and Ultra High Frequency Active SONAR Technology; Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-27

... such as: The attacks of September 11, 2001; natural disasters such as Hurricanes Katrina and Rita of... technology during times of extreme weather, such as hurricanes, could be required for onshore areas that...

Exploring Communication Technology.

ERIC Educational Resources Information Center

Wood, Jimmie; Kellum, Mary

These teacher's materials for a seven-unit course were developed to help students develop technological literacy, career exploration, and problem-solving skills relative to the communication industries. The seven units are on an introduction to communication, verbal communication, design and sketching, drafting, graphic reproduction, photography,…

FORENSIC DNA BANKING LEGISLATION IN DEVELOPING COUNTRIES: PRIVACY AND CONFIDENTIALITY CONCERNS REGARDING A DRAFT FROM TURKISH LEGISLATION.

PubMed

Ilgili, Önder; Arda, Berna

This paper presents and analyses, in terms of privacy and confidentiality, the Turkish Draft Law on National DNA Database prepared in 2004, and concerning the use of DNA analysis for forensic objectives and identity verification in Turkey. After a short introduction including related concepts, we evaluate the draft law and provide articles about confidentiality. The evaluation reminded us of some important topics at international level for the developing countries. As a result, the need for sophisticated legislations about DNA databases, for solutions to issues related to the education of employees, and the technological dependency to other countries emerged as main challenges in terms of confidentiality for the developing countries. As seen in the Turkish Draft Law on National DNA Database, the protection of the fundamental rights and freedoms requires more care during the legislative efforts.

Skin Health Connected to the Use of Absorbent Hygiene Products: A Review.

PubMed

Bender, Johanna Karlsson; Faergemann, Jan; Sköld, Maria

2017-09-01

Over the past 50 years, absorbent hygiene products such as baby diapers and incontinence products have become essential features of modern day life. Through innovation and enhanced technology, their design, composition and performance have been dramatically upgraded from their early forms, and they have transformed the lives of millions of people, improving their quality of life. Skin health related to the use of absorbent hygiene products has accordingly also greatly improved. Still, the wearing of absorbent hygiene products will affect the skin, and for some users the changes in microclimate, mechanical interactions and the exposure to urine and faeces may result in irritant contact dermatitis, i.e. diaper dermatitis (DD) or incontinence-associated dermatitis (IAD). Babies with developing skin and the elderly with deteriorating skin functions who are the most frequent users of absorbent hygiene products are more vulnerable to the causal factors. Although irritant reactions are the most common, allergic contact dermatitis should be considered if a DD/IAD fails to improve by recommended actions. There is also a connection between IAD and pressure ulcer development of which it is important to be aware. A holistic approach of using high-quality absorbent hygiene products in combination with appropriate skin care will help maintaining good skin health.

Drivers of sustained hygiene behaviour change: A case study from mid-western Nepal.

PubMed

McMichael, Celia; Robinson, Priscilla

2016-08-01

Behaviour change is central to the prevention of many population health problems, yet it is typically difficult to initiate and sustain. This paper reports on an evaluation of a water, sanitation and hygiene (WASH) intervention in mid-western Nepal, with particular focus on the drivers and barriers for handwashing with soap/ash and elimination of open defecation. The research was conducted during October-November 2014, two and half years following the intervention's end-point. Qualitative data were collected from the target community (n = 112) via group discussions, interviews and drawings/stories of 'most significant change'. Households' handwashing/water facilities and toilets were observed. Analysis was informed by a model that highlights environmental, psychosocial and technological factors that shape hygiene behaviours across multiple levels, from the habitual to the structural (Dreibelbis et al. 2013). Findings indicate the intervention has supported development of new norms around hygiene behaviours. Key drivers of sustained hygiene behaviour were habit formation, emotional drivers (e.g. disgust, affiliation), and collective action and civic pride; key constraints included water scarcity and socio-economic disadvantage. Identifying and responding to the drivers and constraints of hygiene behaviour change in specific contexts is critical to sustained behaviour change and population health impact. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Training and Technology Project Experimental Research Program for Vocational-Technical Teachers. Final Report.

ERIC Educational Resources Information Center

Merrill, E.L.; Russell, Wendell H.

Over a 31-month period from June 1966 to December 1968, the University of Tennessee and Union Carbide Corporation conducted preservice and inservice institutes for 160 industrial education teachers. These institutes carried college credit and covered Mechanical Technology and Drafting, Industrial Electronics Technology, Machine Shop and…

Civil Technology Applications. Teacher Edition [and] Student Edition.

ERIC Educational Resources Information Center

Schertz, Karen

Teacher and student editions of Civil Technology Applications are one in a series of competency-based instructional materials for drafting and civil technology programs. It includes the technical content and tasks necessary for a student to be employed as a drafter or civil technician in a civil engineering firm. Introductory pages in the teacher…

Draft genome sequence of Trametes villosa (Sw.) Kreisel CCMB561, a tropical white-rot Basidiomycota from the semiarid region of Brazil.

PubMed

Ferreira, Dalila Souza Santos; Kato, Rodrigo Bentes; Miranda, Fábio Malcher; da Costa Pinheiro, Kenny; Fonseca, Paula Luize Camargos; Tomé, Luiz Marcelo Ribeiro; Vaz, Aline Bruna Martins; Badotti, Fernanda; Ramos, Rommel Thiago Jucá; Brenig, Bertram; Azevedo, Vasco Ariston de Carvalho; Benevides, Raquel Guimarães; Góes-Neto, Aristóteles

2018-06-01

Herein, we present the draft genome of Trametes villosa isolate CCMB561, a wood-decaying Basidiomycota commonly found in tropical semiarid climate. The genome assembly was 57.98 Mb in size with an L50 of 691. A total of 16,711 putative protein-encoding genes was predicted, including 590 genes coding for carbohydrate-active enzymes (CAZy), directly involved in the decomposition of lignocellulosic materials. This is the first genome of this species of high interest in bioenergy research. The draft genome of Trametes villosa isolate CCMB561 will provide an important resource for future investigations in biofuel production, bioremediation and other green technologies.

THE U.S. EVIRONMENTAL PROTECTION AGENCY ENVIRONMENTAL TECHNOLOGY VERIFICATION PROGRAM—AN OVERVIEW

EPA Science Inventory

This is an article about monitoring technologies in the Environmental Technolgy Verification (ETV) Program which will be published in the Journal of Occupational And Environmental Hygiene. This article gives an overview of the entire ETV program with emphasis on monitoring techn...

[Investigation of the Campaign of"Eliminating the Four Pests and Paying Attention to Hygiene"in Shanxi province in the 1950s, with special reference to technological innovation].

PubMed

Wu, X Y

2016-07-28

In order to improve the level of people's living and health standard, increase the output of cereal crops, achieve the country's economic recovery and development, and consolidate the new state power, a Campaign of"Eliminating the Four Pests and Paying Attention to Hygiene"in the field of health was launched by the Central Government in the 1950s. In response to the call of government, Shanxi province actively organized the people to participate in this Campaign. For improving the efficiency of Eliminating the Four Pests, people widely carried out technological innovation, with constant creation and invented advanced tools, and gained fruitful technological achievements. Through technological innovation, the working efficiency and quality were enhanced. More importantly, the interaction between the national and local authorities was promoted. In other words, there was a formation of national political domination and power over the local authority, as well as the"owner"awareness and the formation of the state conception.

Technologies for ECLSS Evolution

NASA Technical Reports Server (NTRS)

Diamant, Bryce L.

1990-01-01

Viewgraphs and discussion on technologies for Environmental Control and Life Support System (ECLSS) evolution are presented. Topics covered include: atmosphere revitalization including CO2 removal, CO2 reduction, O2 generation, and trace contaminant control; water recovery and management including urine processing, hygiene water processing, and potable water processing; and waste management. ECLSS technology schematics, process diagrams, and fluid interfaces are included.

The Integrated Behavioural Model for Water, Sanitation, and Hygiene: a systematic review of behavioural models and a framework for designing and evaluating behaviour change interventions in infrastructure-restricted settings.

PubMed

Dreibelbis, Robert; Winch, Peter J; Leontsini, Elli; Hulland, Kristyna R S; Ram, Pavani K; Unicomb, Leanne; Luby, Stephen P

2013-10-26

Promotion and provision of low-cost technologies that enable improved water, sanitation, and hygiene (WASH) practices are seen as viable solutions for reducing high rates of morbidity and mortality due to enteric illnesses in low-income countries. A number of theoretical models, explanatory frameworks, and decision-making models have emerged which attempt to guide behaviour change interventions related to WASH. The design and evaluation of such interventions would benefit from a synthesis of this body of theory informing WASH behaviour change and maintenance. We completed a systematic review of existing models and frameworks through a search of related articles available in PubMed and in the grey literature. Information on the organization of behavioural determinants was extracted from the references that fulfilled the selection criteria and synthesized. Results from this synthesis were combined with other relevant literature, and from feedback through concurrent formative and pilot research conducted in the context of two cluster-randomized trials on the efficacy of WASH behaviour change interventions to inform the development of a framework to guide the development and evaluation of WASH interventions: the Integrated Behavioural Model for Water, Sanitation, and Hygiene (IBM-WASH). We identified 15 WASH-specific theoretical models, behaviour change frameworks, or programmatic models, of which 9 addressed our review questions. Existing models under-represented the potential role of technology in influencing behavioural outcomes, focused on individual-level behavioural determinants, and had largely ignored the role of the physical and natural environment. IBM-WASH attempts to correct this by acknowledging three dimensions (Contextual Factors, Psychosocial Factors, and Technology Factors) that operate on five-levels (structural, community, household, individual, and habitual). A number of WASH-specific models and frameworks exist, yet with some limitations. The IBM-WASH model aims to provide both a conceptual and practical tool for improving our understanding and evaluation of the multi-level multi-dimensional factors that influence water, sanitation, and hygiene practices in infrastructure-constrained settings. We outline future applications of our proposed model as well as future research priorities needed to advance our understanding of the sustained adoption of water, sanitation, and hygiene technologies and practices.

The Integrated Behavioural Model for Water, Sanitation, and Hygiene: a systematic review of behavioural models and a framework for designing and evaluating behaviour change interventions in infrastructure-restricted settings

PubMed Central

2013-01-01

Background Promotion and provision of low-cost technologies that enable improved water, sanitation, and hygiene (WASH) practices are seen as viable solutions for reducing high rates of morbidity and mortality due to enteric illnesses in low-income countries. A number of theoretical models, explanatory frameworks, and decision-making models have emerged which attempt to guide behaviour change interventions related to WASH. The design and evaluation of such interventions would benefit from a synthesis of this body of theory informing WASH behaviour change and maintenance. Methods We completed a systematic review of existing models and frameworks through a search of related articles available in PubMed and in the grey literature. Information on the organization of behavioural determinants was extracted from the references that fulfilled the selection criteria and synthesized. Results from this synthesis were combined with other relevant literature, and from feedback through concurrent formative and pilot research conducted in the context of two cluster-randomized trials on the efficacy of WASH behaviour change interventions to inform the development of a framework to guide the development and evaluation of WASH interventions: the Integrated Behavioural Model for Water, Sanitation, and Hygiene (IBM-WASH). Results We identified 15 WASH-specific theoretical models, behaviour change frameworks, or programmatic models, of which 9 addressed our review questions. Existing models under-represented the potential role of technology in influencing behavioural outcomes, focused on individual-level behavioural determinants, and had largely ignored the role of the physical and natural environment. IBM-WASH attempts to correct this by acknowledging three dimensions (Contextual Factors, Psychosocial Factors, and Technology Factors) that operate on five-levels (structural, community, household, individual, and habitual). Conclusions A number of WASH-specific models and frameworks exist, yet with some limitations. The IBM-WASH model aims to provide both a conceptual and practical tool for improving our understanding and evaluation of the multi-level multi-dimensional factors that influence water, sanitation, and hygiene practices in infrastructure-constrained settings. We outline future applications of our proposed model as well as future research priorities needed to advance our understanding of the sustained adoption of water, sanitation, and hygiene technologies and practices. PMID:24160869

Advances in technologies and study design

USDA-ARS?s Scientific Manuscript database

Completion of the initial draft sequence of the human genome was the proving ground for and has ushered in significant advancements in technology of increasing sophistication and ever increasing amounts of data. Often, this combination has a multiplicative effect of stimulating research groups to co...

Develop nondestructive rapid pavement quality assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

Develop nondestructive rapid pavement quality Assurance/quality control evaluation test methods and supporting technology : project summary.

DOT National Transportation Integrated Search

2017-01-01

The findings from the proof of concept with mechanics-based models for flexible base suggest additional validation work should be performed, draft construction specification frameworks should be developed, and work extending the technology to stabili...

Start Later, Sleep Later: School Start Times and Adolescent Sleep in Homeschool vs. Public/Private School Students

PubMed Central

Meltzer, Lisa J.; Shaheed, Keisha; Ambler, Devon

2014-01-01

Homeschool students provide a naturalistic comparison group for later/flexible school start times. This study compared sleep patterns and sleep hygiene for homeschool students and public/private school students (grades 6-12). Public/private school students (n=245) and homeschool students (n=162) completed a survey about sleep patterns and sleep hygiene. Significant school group differences were found for weekday bedtime, wake time, and total sleep time, with homeschool students waking later and obtaining more sleep. Homeschool students had later school start times, waking at the same time that public/private school students were starting school. Public/private school students had poorer sleep hygiene practices, reporting more homework and use of technology in the hour before bed. Regardless of school type, technology in the bedroom was associated with shorter sleep duration. Later school start times may be a potential countermeasure for insufficient sleep in adolescents. Future studies should further examine the relationship between school start times and daytime outcomes, including academic performance, mood, and health. PMID:25315902

Technology-enhanced caries detection and diagnosis.

PubMed

Strassler, Howard E; Sensi, Luis Guilherme

2008-10-01

The prevalence of dental caries in children and adults in the United States has been declining the past 40 years primarily because of increased use of fluoride, improved oral hygiene and better oral hygiene devices, a greater emphasis on disease prevention and control, and better access to dental care made available by the dental profession. Caries diagnosis and detection for pit-and-fissure lesions has changed dramatically in the past 25 years. Research has confirmed that the carious process is bacterially mediated and is accompanied by changes in salivary flow and pH and the intake of refined carbohydrates. In recent years a number of new technologies have become available as adjuncts to traditional methods of diagnosing carious lesions. While using these new technologies, the clinician still needs to understand the concepts of caries risk, diagnosis, detection, and assessment. Working from the evidence, dental practitioners can decide on a sound clinical diagnosis and treatment plan.

The fast changing landscape of sequencing technologies and their impact on microbial genome assemblies and annotation.

PubMed

Mavromatis, Konstantinos; Land, Miriam L; Brettin, Thomas S; Quest, Daniel J; Copeland, Alex; Clum, Alicia; Goodwin, Lynne; Woyke, Tanja; Lapidus, Alla; Klenk, Hans Peter; Cottingham, Robert W; Kyrpides, Nikos C

2012-01-01

The emergence of next generation sequencing (NGS) has provided the means for rapid and high throughput sequencing and data generation at low cost, while concomitantly creating a new set of challenges. The number of available assembled microbial genomes continues to grow rapidly and their quality reflects the quality of the sequencing technology used, but also of the analysis software employed for assembly and annotation. In this work, we have explored the quality of the microbial draft genomes across various sequencing technologies. We have compared the draft and finished assemblies of 133 microbial genomes sequenced at the Department of Energy-Joint Genome Institute and finished at the Los Alamos National Laboratory using a variety of combinations of sequencing technologies, reflecting the transition of the institute from Sanger-based sequencing platforms to NGS platforms. The quality of the public assemblies and of the associated gene annotations was evaluated using various metrics. Results obtained with the different sequencing technologies, as well as their effects on downstream processes, were analyzed. Our results demonstrate that the Illumina HiSeq 2000 sequencing system, the primary sequencing technology currently used for de novo genome sequencing and assembly at JGI, has various advantages in terms of total sequence throughput and cost, but it also introduces challenges for the downstream analyses. In all cases assembly results although on average are of high quality, need to be viewed critically and consider sources of errors in them prior to analysis. These data follow the evolution of microbial sequencing and downstream processing at the JGI from draft genome sequences with large gaps corresponding to missing genes of significant biological role to assemblies with multiple small gaps (Illumina) and finally to assemblies that generate almost complete genomes (Illumina+PacBio).

ECLSS evolution: Advanced instrumentation interface requirements. Volume 3: Appendix C

NASA Technical Reports Server (NTRS)

1991-01-01

An Advanced ECLSS (Environmental Control and Life Support System) Technology Interfaces Database was developed primarily to provide ECLSS analysts with a centralized and portable source of ECLSS technologies interface requirements data. The database contains 20 technologies which were previously identified in the MDSSC ECLSS Technologies database. The primary interfaces of interest in this database are fluid, electrical, data/control interfaces, and resupply requirements. Each record contains fields describing the function and operation of the technology. Fields include: an interface diagram, description applicable design points and operating ranges, and an explaination of data, as required. A complete set of data was entered for six of the twenty components including Solid Amine Water Desorbed (SAWD), Thermoelectric Integrated Membrane Evaporation System (TIMES), Electrochemical Carbon Dioxide Concentrator (EDC), Solid Polymer Electrolysis (SPE), Static Feed Electrolysis (SFE), and BOSCH. Additional data was collected for Reverse Osmosis Water Reclaimation-Potable (ROWRP), Reverse Osmosis Water Reclaimation-Hygiene (ROWRH), Static Feed Solid Polymer Electrolyte (SFSPE), Trace Contaminant Control System (TCCS), and Multifiltration Water Reclamation - Hygiene (MFWRH). A summary of the database contents is presented in this report.

Draft Genome Sequences of Four Enterococcus faecium Strains Isolated from Argentine Cheese

PubMed Central

Martino, Gabriela P.; Quintana, Ingrid M.; Espariz, Martín; Blancato, Victor S.; Gallina Nizo, Gabriel; Esteban, Luis

2016-01-01

We report the draft genome sequences of four Enterococcus faecium strains isolated from Argentine regional cheeses. These strains were selected based on their technological properties, i.e., their ability to produce aroma compounds (diacetyl, acetoin, and 2,3-butanediol) from citrate. The goal of our study is to provide further genetic evidence for the rational selection of enterococci strains based on their pheno- and genotype in order to be used in cheese production. PMID:26847907

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile for computer-integrated manufacturing technology begins with definitions for four occupations: manufacturing technician, quality technician, mechanical engineering technician, and computer-assisted design/drafting (CADD) technician. A chart lists competencies by unit and indicates whether entire or partial unit is…

An overview of spray drift reduction testing of spray nozzles

USDA-ARS?s Scientific Manuscript database

The importance of the development and testing of drift reduction technologies (DRTs) is increasing. Common spray drift reduction technologies include spray nozzles and spray adjuvants. Following draft procedures developed for a DRT program, three spray nozzles were tested under high air speed cond...

78 FR 22889 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-17

... the data collection plans and draft instruments, email [email protected] or call the HRSA Reports... technology to minimize the information collection burden. Information Collection Request Title: Data... utilize technology and systems for the purpose of collecting, validating and verifying information...

78 FR 27241 - Agency Information Collection Activities; Proposed Collection: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-09

... the data collection plans and draft instruments, email [email protected] or call the HRSA Information... technology to minimize the information collection burden. Information Collection Request Title... instructions; to develop, acquire, install and utilize technology and systems for the purpose of collecting...

Rescuing Writing Instruction: How To Save Time & Money with Technology

ERIC Educational Resources Information Center

Kuriloff, Peshe C.

2004-01-01

This document focuses on the writing skills of college students. The days of students sifting through piles of file cards, producing detailed outlines, and handwriting drafts have slipped into the distant past. Students write quickly and casually with the assistance of technology, and common sense dictates that technology needs to be used to teach…

MECHANICAL TECHNOLOGY, DESIGN AND PRODUCTION, SUGGESTED TECHNIQUES FOR DETERMINING COURSES OF STUDY IN VOCATIONAL EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

PETERSON, CLARENCE E.

THIS PUBLICATION IS THE THIRD IN A SERIES DESIGNED TO PROVIDE INFORMATION TO HELP STATES ORGANIZE AND OPERATE PROGRAMS UNDER TITLE VIII OF THE NATIONAL DEFENSE EDUCATION ACT OF 1958. THE OTHER PUBLICATIONS ARE "MECHANICAL DRAFTING AND DESIGN TECHNOLOGY" (VT 001 823) AND "ELECTRICAL AND ELECTRONIC TECHNOLOGY" (VT 002 421). EACH…

Systems Security Engineering

DTIC Science & Technology

2010-08-22

Commission (IEC). “Information technology — Security techniques — Code of practice for information security management ( ISO /IEC 27002 ...Information technology — Security techniques — Information security management systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security...was a draft ISO standard on Systems and software engineering, Systems and software assurance [18]. Created by systems engineers for systems

Scenario drafting to anticipate future developments in technology assessment.

PubMed

Retèl, Valesca P; Joore, Manuela A; Linn, Sabine C; Rutgers, Emiel J T; van Harten, Wim H

2012-08-16

Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake) were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs) was compared to clinical guidelines, calculated from the past (2005) until the future (2020). In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY), meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. When optimal diffusion of a technology is sought, incorporating process-uncertainty by means of scenario drafting into a decision model may reveal unanticipated developments and can demonstrate a range of possible cost-effectiveness outcomes. The effect of scenarios give additional information on the speed with cost effectiveness might be reached and thus provide a more realistic picture for policy makers, opinion leaders and manufacturers.

Scenario drafting to anticipate future developments in technology assessment

PubMed Central

2012-01-01

Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. Methods To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake) were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs) was compared to clinical guidelines, calculated from the past (2005) until the future (2020). Results In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY), meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. Conclusions When optimal diffusion of a technology is sought, incorporating process-uncertainty by means of scenario drafting into a decision model may reveal unanticipated developments and can demonstrate a range of possible cost-effectiveness outcomes. The effect of scenarios give additional information on the speed with cost effectiveness might be reached and thus provide a more realistic picture for policy makers, opinion leaders and manufacturers. PMID:22894140

[The hygienic situation of the central drinking water supply in the former East Germany--an evaluation of the annual reports on water hygiene from 1984 to 1989].

PubMed

Schlosser, F U; Schulze, E

1991-12-01

In the former GDR an annual report on the situation in the field of communal hygiene had to be elaborated and submitted to the minister of public health. One part of this was the report on the hygienic situation in water supply, worked out by the Reference Laboratory for Water Hygiene in Bad Elster. After the political changes in autumn 1989 it became possible to analyse these reports as a whole. In this paper the reports from 1984 to 1989 are interpreted. The results of the laboratory measurements and field controls by the State Sanitary Inspectorates are shown in 17 graphics and compared to the bacteriological and chemical limits in drinking water standards. Special issue is drawn on the estimation of the number of inhabitants concerned by reduced drinking-water quality or any hazardous situations. The special problems of the different districts are compared in some graphics. The hygienic safety of the central drinking-water supply units is assessed basing on the results of the field controls by the State Sanitary Inspectorate. The Sanitation of the central drinking-water supply facilities in the new federal countries of the FRG is connected with the solution of a variety of technological problems, particularly the improvement of the water treatment techniques and the restoration of the pipe systems. The use of surface waters from extremely polluted rivers generates a high hygienic risk and requires the sanitation of the rivers. The high number of existing protection zones in the catchment areas for drinking-water is a valuable precondition to ensure the hygienic safety of the drinking-water supply in the new federal countries.

[Investigation of the process of personal hygiene items biodegradation by cellulose-fermenting microorganisms].

PubMed

Il'in, V K; Starkov, L V; Kostrov, S V; Belikodvorskaia, G A; Chuvil'skaia, N A; Mukhamedieva, L N; Mikos, K N

2004-01-01

Cellulose-containing wastes are one of the heaviest and biggest ingredients of solid domestic wastes piling up during spaceflight. For the most part these are disposable personal hygiene items used in large quantities in the absence of shower. These wastes contain human body products which are very dangerous from the sanitary-epidemiological standpoint. The purpose was to explore potentiality of microbial biodegradation of cellulose-containing hygiene items anaerobically with dry mass transformation into liquid and biogas. Among specific objectives were test cultivation of active strains of reference cultures of cellulose-fermenting anaerobic thermophilic bacteria on hygiene items as the only source of carbon, evaluation of ways and need of pretreatment of gauze pads to stimulate biodegradation, and chemical analysis of resulting biogas. From the investigation it was concluded that gauze pads are susceptible to biodegradation by anaerobic bacteria producing a low toxicity gas fraction. Therefore, the proposed technology can be considered as a candidate for integration into the spacecrew life support system.

Technology of Producing the Contact Connections of Superconductor Metal-Sheathed Cable

NASA Astrophysics Data System (ADS)

Jakubowski, Andrzej

2017-06-01

The technology of producing the current contact connections on the superconductor cable edges is presented. This lead cable is used as one of the major elements of the magnetic system in thermonuclear reactor construction, actuality for modern world energy. The technology is realized by the radial draft of metal thin-walled tube on the conductor's package. The filling of various profiles by round section wire is optimized. Geometrical characteristics of the dangerous crosssection (as a broken ring) of thin-walled tube injured by the sector cut-out are accounted. The comparative strength calculation of the solid and injured tubes at a longitudinal compression and lateral bending is acted. The radial draft mechanism of cylindrical thin-walled sheath with the wire packing is designed. The necessity to use the nonlinear theory for the sheaths calculate is set. The resilient co-operation of wires as the parallel located cylinders with the contact stripes of rectangular form is considered.

Educators' Motivation on Integration of ICTs into Pedagogy: Case of Disadvantaged Areas

ERIC Educational Resources Information Center

Chigona, Agnes; Chigona, Wallace; Davids, Zane

2014-01-01

This paper investigates factors that motivate educators to use Information Communication Technologies (ICTs) in schools in disadvantaged areas. The study employed Herzberg' Motivation-Hygiene theory to guide the process of understanding the factors that motivate or demotivate educators when using the technology for teaching and learning.…

Three Perspectives on Innovation--the Technological, the Political, and the Cultural. Draft.

ERIC Educational Resources Information Center

House, Ernest R.

Awareness of the three analytical perspectives on educational innovation leads to better understanding of educational change processes and better innovation strategies and policies. The three perspectives--technological, political, and cultural--are "screens" of facts, values, and presuppositions through which analysts view innovation.…

Improving the competency of dental hygiene students in detecting dental restorations using quantitative light-induced fluorescence technology.

PubMed

Oh, Hye-Young; Jung, Hoi-In; Lee, Jeong-Woo; de Jong, Elbert de Josselin; Kim, Baek-Il

2017-03-01

The purpose of this study was to determine the usefulness of a quantitative light-induced fluorescence (QLF) technology in detecting dental restorations by comparing the detection ability of dental hygiene students between using conventional visual inspection alone and visual inspection combined with QLF technology. The subjects of this study comprised 92 dental hygiene students. The students assigned to the control group only used white-light images to visually assess the mouth environment, while those in the experimental group additionally used fluorescence images. Using the test results of an experienced inspector as a reference value, the agreement between the reference value and the evaluation results of the students in the experimental and control groups was evaluated using Cohen's kappa and the percentage agreement. The subjects were then classified into groups covering three percentage ranges according to the score distribution and agreement values of the three groups were compared. The percentage agreement was calculated according to the type of dental restorations. The mean kappa value was significantly higher in the experimental group than the control group (0.70 vs 0.60, p<0.001), as was the percentage agreement (80.06% vs 72.64%, p<0.001). The agreement rate when using QLF technology increased by 8% more in the middle and bottom percentage groups than in the top percentage group (p<0.001). The agreement rate also varied with the type of restoration, being significantly higher for a sound tooth or tooth-colored restoration in the experimental group (p<0.001). Combining QLF technology with conventional visual inspections could improve the ability to detect dental restorations and distinguish sound teeth from aesthetic restorations. Copyright © 2016 Elsevier B.V. All rights reserved.

A proposed draft protocol for the European Convention on Biomedicine relating to research on the human embryo and fetus.

PubMed

Byk, J C

1997-02-01

The objective of this paper is to stimulate academic debate on embryo and fetal research from the perspective of the drafting of a protocol to the European Convention on Biomedicine. The Steering Committee on Bioethics of the Council of Europe was mandated to draw up such a protocol and for this purpose organised an important symposium on reproductive technologies and embryo research, in Strasbourg from the 16th to the 18th of December 1996.

Draft Genome Sequences of Four Enterococcus faecium Strains Isolated from Argentine Cheese.

PubMed

Martino, Gabriela P; Quintana, Ingrid M; Espariz, Martín; Blancato, Victor S; Gallina Nizo, Gabriel; Esteban, Luis; Magni, Christian

2016-02-04

We report the draft genome sequences of four Enterococcus faecium strains isolated from Argentine regional cheeses. These strains were selected based on their technological properties, i.e., their ability to produce aroma compounds (diacetyl, acetoin, and 2,3-butanediol) from citrate. The goal of our study is to provide further genetic evidence for the rational selection of enterococci strains based on their pheno- and genotype in order to be used in cheese production. Copyright © 2016 Martino et al.

The Quantum Leap in Special Education: New Information and Communication Technologies. Their Impact upon Educational Opportunities for Disabled People, Focussing on How Integration in the Ordinary Educational System Can Be Facilitated. Draft Document.

ERIC Educational Resources Information Center

Kristiansen, Rolf

This paper suggests means of merging educational ideas with new information and communication technologies to aid individuals with disabilities. New technologies discussed include microtechnology and integrated circuits, high speed processing and retrieval of information, and light-weight equipment, among others. New technologies can be used as…

Provoking "Eureka" moments for effective infection control strategies.

PubMed

Pittet, Didier

2014-01-01

Safety is now a fundamental principle of patient care and a critical component of quality management. Health care-associated infection prevention strategies need to be constantly revisited and updated to be effective. The "Geneva hand hygiene model" is a typical example of a breakthrough innovatory campaign that caught fire and went viral worldwide, thanks to its adoption by the World Health Organization (WHO) as the First Global Patient Safety Challenge. The campaign remains an inspiration for further innovation. To encourage new and disruptive technologies with the potential to improve patient safety through the successful implementation of the WHO multimodal strategy, the University of Geneva Hospitals/WHO Collaborating Centre on Patient Safety, together with the Aesculap Academy, have created a series of "Hand Hygiene Excellence Awards" and "Hand Hygiene Innovation Awards" worldwide.

Case Analysis Of The Joint High Speed Vessel Program: Defense Acquisition

DTIC Science & Technology

2016-09-01

reviews resulted in a series of Advanced Concept Technology Demonstrations (ACTD) designed to explore the military utility of converted commercial...requirements into a final and unique materiel solution for a system capability that is fielded. 14. SUBJECT TERMS Advanced Concept and Technology ...Advanced Concept Technology Demonstrations (ACTD) designed to explore the military utility of converted commercial, high-speed, shallow-draft

In Brief: Geoengineering draft statement

NASA Astrophysics Data System (ADS)

Showstack, Randy

2009-04-01

The American Meteorological Society (AMS) has prepared a draft policy statement on geoengineering the climate system, which the AMS Council is considering for approval. The statement notes, “Geoengineering will not substitute for either aggressive mitigation or proactive adaptation. It could contribute to a comprehensive risk management strategy to slow climate change and alleviate its negative impacts, but the potential for adverse and unintended consequences implies a need for adequate research, appropriate regulation, and transparent consideration.” The statement, if adopted, indicates that AMS recommends enhanced research on the scientific and technological potential for geoengineering the climate system; additional study of the historical, ethical, legal, political, and societal aspects of the geoengineering issues; and the development and analysis of policy options to promote transparency and international cooperation in exploring geoengineering options along with restrictions on reckless efforts to manipulate the climate system. AMS is accepting comments on the draft statement until 23 April. For more information, visit http://ametsoc.org/policy/draftstatements/index.html#draft.

Use of low-coverage, large-insert, short-read data for rapid and accurate generation of enhanced-quality draft Pseudomonas genome sequences.

PubMed

O'Brien, Heath E; Gong, Yunchen; Fung, Pauline; Wang, Pauline W; Guttman, David S

2011-01-01

Next-generation genomic technology has both greatly accelerated the pace of genome research as well as increased our reliance on draft genome sequences. While groups such as the Genomics Standards Consortium have made strong efforts to promote genome standards there is a still a general lack of uniformity among published draft genomes, leading to challenges for downstream comparative analyses. This lack of uniformity is a particular problem when using standard draft genomes that frequently have large numbers of low-quality sequencing tracts. Here we present a proposal for an "enhanced-quality draft" genome that identifies at least 95% of the coding sequences, thereby effectively providing a full accounting of the genic component of the genome. Enhanced-quality draft genomes are easily attainable through a combination of small- and large-insert next-generation, paired-end sequencing. We illustrate the generation of an enhanced-quality draft genome by re-sequencing the plant pathogenic bacterium Pseudomonas syringae pv. phaseolicola 1448A (Pph 1448A), which has a published, closed genome sequence of 5.93 Mbp. We use a combination of Illumina paired-end and mate-pair sequencing, and surprisingly find that de novo assemblies with 100x paired-end coverage and mate-pair sequencing with as low as low as 2-5x coverage are substantially better than assemblies based on higher coverage. The rapid and low-cost generation of large numbers of enhanced-quality draft genome sequences will be of particular value for microbial diagnostics and biosecurity, which rely on precise discrimination of potentially dangerous clones from closely related benign strains.

An Interim Report on NASA's Draft Space Technology Roadmaps

NASA Technical Reports Server (NTRS)

2011-01-01

NASA has developed a set of 14 draft roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist (OCT). Each of these roadmaps focuses on a particular technology area (TA). The roadmaps are intended to foster the development of advanced technologies and concepts that address NASA's needs and contribute to other aerospace and national needs. OCT requested that the National Research Council conduct a study to review the draft roadmaps, gather and assess relevant community input, and make recommendations and suggest priorities to inform NASA's decisions as it finalizes its roadmaps. The statement of task states that "based on the results of the community input and its own deliberations, the steering committee will prepare a brief interim report that addresses high-level issues associated with the roadmaps, such as the advisability of modifying the number or technical focus of the draft NASA roadmaps." This interim report, which does not include formal recommendations, addresses that one element of the study charge. NASA requested this interim report so that it would have the opportunity to make an early start in modifying the draft roadmaps based on feedback from the panels and steering committee. The final report will address all other tasks in the statement of task. In particular, the final report will include a prioritization of technologies, will describe in detail the prioritization process and criteria, and will include specific recommendations on a variety of topics, including many of the topics mentioned in this interim report. In developing both this interim report and the final report to come, the steering committee draws on the work of six study panels organized by technical area, loosely following the organization of the 14 roadmaps, as follows: A Panel 1: Propulsion and Power TA01 Launch Propulsion Systems TA02 In-Space Propulsion Technologies TA03 Space Power and Energy Storage Systems TA13 Ground and Launch Systems Processing B Panel 2: Robotics, Communications, and Navigation TA04 Robotics, TeleRobotics, and Autonomous Systems TA05 Communication and Navigation Systems C Panel 3: Instruments and Computing TA08 Science Instruments, Observatories, and Sensor Systems TA11 Modeling, Simulation, Information Technology, and Data Processing D Panel 4: Human Health and Surface Exploration TA06 Human Health, Life Support, and Habitation Systems TA07 Human Exploration Destination Systems E Panel 5: Materials Panel TA10 Nanotechnology TA12 Materials, Structures, Mechanical Systems, and Manufacturing TA14 Thermal Management Systems F Panel 6: Entry, Descent, and Landing Panel TA09 Entry, Descent, and Landing Systems In addition to drawing on the expertise represented on the steering committee and panels, the committee obtained input from each of 14 public workshops held on each of the 14 roadmaps. At these 1-day workshops, invited speakers, guests, and members of the public engaged in discussions on the different technology areas and their value to NASA. Broad community input was also solicited from a public website, where more than 240 public comments were received on the draft roadmaps in response to application of criteria (such as benefit, risk and reasonableness, and alignment with NASA and national goals) that the steering committee established. This interim report reflects the results of deliberations by the steering committee in light of these public inputs as well as additional inputs from the six panels. The steering committee's final report will be completed early in 2012. That report will prioritize the technologies that span the entire scope of the 14 roadmaps and provide additional guidance on crosscutting themes and other relevant topics.

The Outlook in Engineering-Related Technology Fields

ERIC Educational Resources Information Center

Weeks, Peggie

2009-01-01

Community colleges have a long and impressive history of preparing a well-qualified technical workforce to meet the immediate and short-term needs of local and regional industries. Programs range from certificates in areas such as drafting, computer-aided design, and automotive technology to associate degrees in electrical and mechanical…

Stafford Technical Center: Designing a Future for Architects and Builders

ERIC Educational Resources Information Center

Lucci, William, Jr.

2005-01-01

In this article, the author describes Stafford Technical Center's Engineering Technology Academy (ETA), in which students pursue a variety of educational and career options for anything connected to construction technologies--including drafting and design, architecture, and even work in historic preservation. In addition to technical skills,…

Report on the Audit of Materials Technology

DTIC Science & Technology

1990-01-25

We are providing this report on the Audit of Materials Technology for your information and use. No comments were required or received on the draft...report. The audit was made from July through September 1989. The objectives of the audit were to evaluate the missions and functions assigned to DOD

You and Technology, A High School Case Study Text.

ERIC Educational Resources Information Center

Damaskos, Nickander J., Ed.; Smyth, Michael P., Ed.

This second draft of a manuscript for a high school engineering and technology course uses case studies as its format. The principles associated with various engineering problems are presented along with their effects on daily life. Topics include the computer, the automotive power system, satellite communications, the petroleum industry, water…

New Technologies, New Curricula.

ERIC Educational Resources Information Center

Speidel, Gisela E.

1995-01-01

This article describes the AutoCAD Laboratory at Hawaii's Kamehameha Secondary Schools, offering the perspective of the AutoCAD instructor and Technology Department Head, looking at a day in the AutoCAD Laboratory, and explaining how teaching students about computer-assisted design and drafting can prepare them for college or careers. (SM)

76 FR 12712 - Announcing Draft Federal Information Processing Standard (FIPS) 201-2, Personal Identity...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-08

... FIPS 201-2 AGENCY: National Institute of Standards and Technology (NIST), Commerce. ACTION: Notice and request for comments. SUMMARY: The National Institute of Standards and Technology (NIST) publishes this... 201-1, and specific changes requested by Federal agencies and implementers. NIST has received numerous...

Radiation processing applications in the Czechoslovak water treatment technologies

NASA Astrophysics Data System (ADS)

Vacek, K.; Pastuszek, F.; Sedláček, M.

The regeneration of biologically clogged water wells by radiation proved to be a successful and economically beneficial process among other promising applications of ionizing radiation in the water supply technology. The application conditions and experience are mentioned. The potential pathogenic Mycobacteria occuring in the warm washing and bathing water are resistant against usual chlorine and ozone concentrations. The radiation sensitivity of Mycobacteria allowed to suggest a device for their destroying by radiation. Some toxic substances in the underground water can be efficiently degraded by gamma radiation directly in the wells drilled as a hydraulic barrier surrounding the contaminated land area. Substantial decrease of CN - concentration and C.O.D. value was observed in water pumped from such well equipped with cobalt sources and charcoal. The removing of pathogenic contamination remains to be the main goal of radiation processing in the water purification technologies. The decrease of liquid sludge specific filter resistance and sedimentation acceleration by irradiation have a minor technological importance. The hygienization of sludge cake from the mechanical belt filter press by electron beam appears to be the optimum application in the Czechoslovak conditions. The potatoes and barley crop yields from experimental plots treated with sludge were higher in comparison with using the manure. Biological sludge from the municipal and food industry water purification plants contains nutritive components. The proper hygienization is a necessary condition for using them as a livestock feed supplement. Feeding experiments with broilers and pigs confirmed the possibility of partial (e.g. 50%) replacement of soya-, bone- or fish flour in feed mixtures by dried sludge hygienized either by heat or by the irradiation.

Strategies for optimizing BioNano and Dovetail explored through a second reference quality assembly for the legume model, Medicago truncatula.

PubMed

Moll, Karen M; Zhou, Peng; Ramaraj, Thiruvarangan; Fajardo, Diego; Devitt, Nicholas P; Sadowsky, Michael J; Stupar, Robert M; Tiffin, Peter; Miller, Jason R; Young, Nevin D; Silverstein, Kevin A T; Mudge, Joann

2017-08-04

Third generation sequencing technologies, with sequencing reads in the tens- of kilo-bases, facilitate genome assembly by spanning ambiguous regions and improving continuity. This has been critical for plant genomes, which are difficult to assemble due to high repeat content, gene family expansions, segmental and tandem duplications, and polyploidy. Recently, high-throughput mapping and scaffolding strategies have further improved continuity. Together, these long-range technologies enable quality draft assemblies of complex genomes in a cost-effective and timely manner. Here, we present high quality genome assemblies of the model legume plant, Medicago truncatula (R108) using PacBio, Dovetail Chicago (hereafter, Dovetail) and BioNano technologies. To test these technologies for plant genome assembly, we generated five assemblies using all possible combinations and ordering of these three technologies in the R108 assembly. While the BioNano and Dovetail joins overlapped, they also showed complementary gains in continuity and join numbers. Both technologies spanned repetitive regions that PacBio alone was unable to bridge. Combining technologies, particularly Dovetail followed by BioNano, resulted in notable improvements compared to Dovetail or BioNano alone. A combination of PacBio, Dovetail, and BioNano was used to generate a high quality draft assembly of R108, a M. truncatula accession widely used in studies of functional genomics. As a test for the usefulness of the resulting genome sequence, the new R108 assembly was used to pinpoint breakpoints and characterize flanking sequence of a previously identified translocation between chromosomes 4 and 8, identifying more than 22.7 Mb of novel sequence not present in the earlier A17 reference assembly. Adding Dovetail followed by BioNano data yielded complementary improvements in continuity over the original PacBio assembly. This strategy proved efficient and cost-effective for developing a quality draft assembly compared to traditional reference assemblies.

[Study on the deteriorating course of fresh milk by laser-induced fluorescence spectra].

PubMed

Liu, J; Yu, C Q; Li, J Z; Yan, J X

2001-12-01

Along with the development of living standard, people's demand for food quality and food hygiene also rises. People demand food not only with rich nutrition, inexpensive price, but also with safety. So food hygiene test is paid common attention of society. Milk is a nourishing food and is loved by people. Sour milk goods from milk is also in great demand. But nourishing foods are good for growing many microbes. Fresh milk and sour milk are easy contaminated by microbes and go bad. Laser-induced fluorescence (LIF) technology is an important part of modern optics. It is broadly applied in biomedicine, diagnostics, test of food hygiene, environment protecting, owing to its high sensitivity, high speed, automation, untouched testing. In this paper, we attempted to LIF technology to test milk food quality. We used the third harmonics pulsed Nd:YAG laser (355 nm) as the exciting source, and a multi-track spectrometer as the detector and measured the intensities of apply LIF of fresh milk and sour milk during their deteriorating course. Test system and test method are introduced, fluorescence spectra of deteriorating course are also attached. The test result makes clear that there are close connection between deteriorating course and fluorescence spectra.

Randomized Controlled Trial of Antiseptic Hand Hygiene Methods in an Outpatient Surgery Clinic.

PubMed

Therattil, Paul J; Yueh, Janet H; Kordahi, Anthony M; Cherla, Deepa V; Lee, Edward S; Granick, Mark S

2015-12-01

Outpatient wound care plays an integral part in any plastic surgery practice. However, compliance with hand hygiene measures has shown to be low, due to skin irritation and lack of time. The objective of this trial was to determine whether single-use, long-acting antiseptics can be as effective as standard multiple-use hand hygiene methods in an outpatient surgical setting. A prospective, randomized controlled trial was performed in the authors' outpatient plastic surgery clinic at Rutgers New Jersey Medical School, Newark, NJ to compare the efficacy of an ethyl alcohol-based sanitizer (Avagard D Instant Hand Aniseptic, 3M Health Care, St. Paul, MN), a benzalkonium chloride-based sanitizer (Soft & Shield, Bioderm Technologies, Inc, Trenton, NJ, distributed by NAPP Technologies, Hackensack, NJ ), and soap and- water handwashing. Subjects included clinic personnel, who were followed throughout the course of a 3-hour clinic session with hourly hand bacterial counts taken. During the course of the trial, 95 subjects completed the clinic session utilizing 1 of the hand hygiene methods (36 ethyl alcohol-based sanitizer, 38 benzalkonium chloride-based sanitizer, and 21 soap-and-water handwashing). There was no difference between hand bacterial counts using the different methods at 4 hourly time points (P greater than 0.05). Hand bacterial counts increased significantly over the 3-hour clinic session with the ethyl alcohol-based sanitizer (9.24 to 21.90 CFU, P less than 0.05), benzalkonium chloride-based sanitizer (6.69 to 21.59 CFU, P less than 0.05), and soap-and-water handwashing (8.43 to 22.75 CFU, P less than 0.05). There does not appear to be any difference in efficacy between single-use, long-acting sanitizer, and standard multiple-use hand hygiene methods. Hand bacterial counts increased significantly over the course of the 3-hour clinic session regardless of the hand hygiene measure used. Hand condition of subjects was improved with the ethyl alcohol-based sanitizer and the benzalkonium chloride-based sanitizer compared with soap-and-water handwashing.

Assembly and features of secondary metabolite biosynthetic gene clusters in Streptomyces ansochromogenes.

PubMed

Zhong, Xingyu; Tian, Yuqing; Niu, Guoqing; Tan, Huarong

2013-07-01

A draft genome sequence of Streptomyces ansochromogenes 7100 was generated using 454 sequencing technology. In combination with local BLAST searches and gap filling techniques, a comprehensive antiSMASH-based method was adopted to assemble the secondary metabolite biosynthetic gene clusters in the draft genome of S. ansochromogenes. A total of at least 35 putative gene clusters were identified and assembled. Transcriptional analysis showed that 20 of the 35 gene clusters were expressed in either or all of the three different media tested, whereas the other 15 gene clusters were silent in all three different media. This study provides a comprehensive method to identify and assemble secondary metabolite biosynthetic gene clusters in draft genomes of Streptomyces, and will significantly promote functional studies of these secondary metabolite biosynthetic gene clusters.

[Methodological approaches to the hygienic evaluation of total artificial lighting of classrooms with different light sources on the basis of the response of the cardiovascular system of schoolchildren].

PubMed

Teksheva, L M; Zvezdina, I V

2014-01-01

Hygienic evaluation of innovative equipment in educational institutions requires the use of appropriate methods permitting to establish valuable criterias for the effectiveness of the application of new technologies. The study of the response of the cardiovascular system of schoolchildren under using different light sources allowed to establish the increase in adaptive capacities and the improvement of the functional state of the organism in LED in comparison with fluorescent lighting.

Evoqua RCRA Permit Application and Draft Permit Documents

EPA Pesticide Factsheets

Documents pertaining to the proposed RCRA permit for the Evoqua Water Technologies LLC carbon regeneration facility located on the Colorado River Indian Tribes (CRIT) reservation near Parker, Arizona.

How can information systems provide support to nurses' hand hygiene performance? Using gamification and indoor location to improve hand hygiene awareness and reduce hospital infections.

PubMed

Marques, Rita; Gregório, João; Pinheiro, Fernando; Póvoa, Pedro; da Silva, Miguel Mira; Lapão, Luís Velez

2017-01-31

Hospital-acquired infections are still amongst the major problems health systems are facing. Their occurrence can lead to higher morbidity and mortality rates, increased length of hospital stay, and higher costs for both hospital and patients. Performing hand hygiene is a simple and inexpensive prevention measure, but healthcare workers' compliance with it is often far from ideal. To raise awareness regarding hand hygiene compliance, individual behaviour change and performance optimization, we aimed to develop a gamification solution that collects data and provides real-time feedback accurately in a fun and engaging way. A Design Science Research Methodology (DSRM) was used to conduct this work. DSRM is useful to study the link between research and professional practices by designing, implementing and evaluating artifacts that address a specific need. It follows a development cycle (or iteration) composed by six activities. Two work iterations were performed applying gamification components, each using a different indoor location technology. Preliminary experiments, simulations and field studies were performed in an Intensive Care Unit (ICU) of a Portuguese tertiary hospital. Nurses working on this ICU were in a focus group during the research, participating in several sessions across the implementation process. Nurses enjoyed the concept and considered that it allows for a unique opportunity to receive feedback regarding their performance. Tests performed on the indoor location technology applied in the first iteration regarding distances estimation presented an unacceptable lack of accuracy. Using a proximity-based technique, it was possible to identify the sequence of positions, but beacons presented an unstable behaviour. In the second work iteration, a different indoor location technology was explored but it did not work properly, so there was no chance of testing the solution as a whole (gamification application included). Combining automated monitoring systems with gamification seems to be an innovative and promising approach, based on the already achieved results. Involving nurses in the project since the beginning allowed to align the solution with their needs. Despite strong evolution through recent years, indoor location technologies are still not ready to be applied in the healthcare field with nursing wards.

Blueprint for a Better World...A Book That Introduces a New, Simpler, Comprehensive Method of Understanding Our Environment. Rough Draft.

ERIC Educational Resources Information Center

Richards, David B.

The world is growing technologically at a rapid pace and people's understanding of these new technological advances and their effects upon the world and its various populations and environments must keep up the pace. Technological advances bring with them ever greater potential problems for humanity and for the world environment. The complications…

Usefulness of an app in improving oral hygiene compliance in adolescent orthodontic patients.

PubMed

Zotti, Francesca; Dalessandri, Domenico; Salgarello, Stefano; Piancino, Mariagrazia; Bonetti, Stefano; Visconti, Luca; Paganelli, Corrado

2016-01-01

To evaluate the influence of an app-based approach in a protocol for domestic oral hygiene maintenance in a group of adolescent patients wearing fixed multibracket appliances. Eighty adolescent patients scheduled to start an orthodontic multibracket treatment were randomly divided into two groups of 40. Plaque index (PI), gingival index (GI), white spots (WS), and caries presence were recorded in all patients, and they were instructed regarding domestic oral hygiene maintenance on the day of braces application (t0) and every 3 months (t1, t2, t3, t4) during the first year of treatment. Study group (SG) patients were enrolled in a WhatsApp chat room-based competition and instructed to share monthly with the other participants two self-photographs (selfies) showing their oral hygiene status. SG patient participation in the chat room was regular and active throughout the observation period. At t2, t3, and t4, SG patients had significantly lower values of both PI and GI and a lower incidence of new WS and caries, compared with the control group. Integration of new "social" technologies in a standard oral hygiene motivation protocol is effective in improving compliance of adolescent patients and in improving their oral health status during orthodontic multibracket treatment.

Evaluation of food storage racks available on the Polish market in the hygienic context

PubMed

Grzesińska, Wiesława; Tomaszewska, Marzena; Bilska, Beata; Trafiałek, Joanna; Dziadek, Michał

Providing safe food products to the consumer depends on the material and technology used and adherence to hygienic practices, throughout the production process. The degree of microbial contamination of a surface is an important indicator of equipment cleanliness and effectiveness of cleaning and disinfection. Used material, construction solutions and quality of the applied devices also have an effect on hygienic status. The objective of the present study was to evaluate the influence of the design and construction material of selected food storage racks, available on the Polish market, on their hygienic status. The study was based on determination of the capability of microbial growth on the surface of the racks and the effectiveness of their cleaning. Microbiological cleanliness on the surface of the racks was monitored by the contact plates which are able to estimate the total number of icroorganisms. Examination of effectiveness of cleaning was conducted by the use of ATP bioluminescence method. This experiment has proven a significant influence of adopted construction solutions on the hygienic status of the examined racks. Presence of antibacterial layer and a choice of the appropriate construction material characterized by a low surface roughness impedes the microbial growth and increases the effectiveness of cleaning. Design solutions have significant impact on the hygienic status of shelves. Selection of a suitable material for the construction of racks can greatly reduce the possibility of the development of microorganism, despite the low efficiency of the cleaning. The application of antimicrobial coatings inhibits microbial growth.

Calculus detection calibration among dental hygiene faculty members utilizing dental endoscopy: a pilot study.

PubMed

Partido, Brian B; Jones, Archie A; English, Dana L; Nguyen, Carol A; Jacks, Mary E

2015-02-01

Dental and dental hygiene faculty members often do not provide consistent instruction in the clinical environment, especially in tasks requiring clinical judgment. From previous efforts to calibrate faculty members in calculus detection using typodonts, researchers have suggested using human subjects and emerging technology to improve consistency in clinical instruction. The purpose of this pilot study was to determine if a dental endoscopy-assisted training program would improve intra- and interrater reliability of dental hygiene faculty members in calculus detection. Training included an ODU 11/12 explorer, typodonts, and dental endoscopy. A convenience sample of six participants was recruited from the dental hygiene faculty at a California community college, and a two-group randomized experimental design was utilized. Intra- and interrater reliability was measured before and after calibration training. Pretest and posttest Kappa averages of all participants were compared using repeated measures (split-plot) ANOVA to determine the effectiveness of the calibration training on intra- and interrater reliability. The results showed that both kinds of reliability significantly improved for all participants and the training group improved significantly in interrater reliability from pretest to posttest. Calibration training was beneficial to these dental hygiene faculty members, especially those beginning with less than full agreement. This study suggests that calculus detection calibration training utilizing dental endoscopy can effectively improve interrater reliability of dental and dental hygiene clinical educators. Future studies should include human subjects, involve more participants at multiple locations, and determine whether improved rater reliability can be sustained over time.

An automated hand hygiene training system improves hand hygiene technique but not compliance.

PubMed

Kwok, Yen Lee Angela; Callard, Michelle; McLaws, Mary-Louise

2015-08-01

The hand hygiene technique that the World Health Organization recommends for cleansing hands with soap and water or alcohol-based handrub consists of 7 poses. We used an automated training system to improve clinicians' hand hygiene technique and test whether this affected hospitalwide hand hygiene compliance. Seven hundred eighty-nine medical and nursing staff volunteered to participate in a self-directed training session using the automated training system. The proportion of successful first attempts was reported for each of the 7 poses. Hand hygiene compliance was collected according to the national requirement and rates for 2011-2014 were used to determine the effect of the training system on compliance. The highest pass rate was for pose 1 (palm to palm) at 77% (606 out of 789), whereas pose 6 (clean thumbs) had the lowest pass rate at 27% (216 out of 789). One hundred volunteers provided feedback to 8 items related to satisfaction with the automated training system and most (86%) expressed a high degree of satisfaction and all reported that this method was time-efficient. There was no significant change in compliance rates after the introduction of the automated training system. Observed compliance during the posttraining period declined but increased to 82% in response to other strategies. Technology for training clinicians in the 7 poses played an important education role but did not affect compliance rates. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

Space Act Agreement Maker (SAAM) With Electronic Routing System (ERouter) Developed

NASA Technical Reports Server (NTRS)

Stauber, Laurel J.

2003-01-01

Members of the Commercial Technology Office at the NASA Glenn Research Center have developed an exciting new tool that greatly reduces the lead time in creating and routing Space Act Agreements. The Space Act Agreement Maker (SAAM) is an e-government Web-based system that automates the initial drafting of Space Act Agreements by technical and program personnel. SAAM also is used for editing and will be used later for maintaining electronic copies of all Space Act Agreements. During the initial drafting, the software prompts NASA personnel proposing an agreement to answer questions regarding the agreement. On the basis of the answers, the software selects from a matrix of NASA standard clauses to produce a first draft of the agreement. The draft agreement and information submitted by the NASA personnel are electronically routed to Glenn s Commercial Technology Office for review and, where necessary, editing. The final version of the agreement, along with any supporting documentation, is then routed for electronic concurrence/approval to the necessary internal review participants using the electronic routing system (e-router). SAAM was developed cooperatively by Glenn s Commercial Technology Office and Glenn s Office of Chief Counsel. Currently, SAAM is being evaluated by the NASA Headquarters General Counsel Office for use at all NASA centers. This system allows for the effective processing of Space Act Agreements for NASA s internal and external customers. Document control is maintained by a database. With SAAM s electronic routing, review times can be reduced significantly, allowing Glenn to more rapidly establish partnerships with industry. Prior to the creation of SAAM, it took several hours to draft a Space Act Agreement. With SAAM in place, the document can be written in about 30 min. Using the e-router also saves time in determining where the agreement is in the routing process. The document can be tracked easily, and delays can be avoided. Important research with industry partners can commence quickly after preliminary discussions have been held. The development of these products is in line with the expanding e-government initiative that is part of the Presidential Management Agenda. By using this product, NASA researchers can secure greater support from industry and academia partners. The Space Act Agreement Maker has been very well received at NASA Headquarters and at some of the other NASA centers as well. We anticipate that the NASA Ames Research Center will have the system in place very soon, and that some of the other centers will use SAAM in the near future. The General Counsel s office at NASA Headquarters has encouraged the Glenn team to develop a similar system for processing patent licenses. Find out more about Glenn's Technology Transfer & Partnership Office http://technology.grc.nasa.gov/.

United States Air Force Computer-Aided Acquisition and Logistics Support (CALS) Evolution of Computer Integrated Manufacturing (CIM) Technologies. Version 2.0 Draft

DOT National Transportation Integrated Search

1988-11-01

During the past decade a great deal of effort has been focused on the advantages computerization can bring to engineering design and production activities. This is seen in such developments as Group Technology (GT), Manufacturing Resource Planning (M...

A Heuristic Approach to Creating Technological Fair Use Guidelines in Higher Education

ERIC Educational Resources Information Center

Roper, Jerry

2017-01-01

Higher education has experienced challenges defining and implementing copyright compliance. Confusion among faculty and staff appears to be common regarding copyright and fair use. The original copyright doctrine was drafted over 200 years ago, which predates practically all technological advances that have and will continue to occur. Change is…

76 FR 6496 - Special Flight Rules Area in the Vicinity of Grand Canyon National Park, Draft Environmental...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-04

... being considered include: Alternative A Current Condition: Key elements are corridors open year round, annual allocation cap of 93,971, and no quiet technology incentive. Current tours for helicopters and... to quiet technology aircraft. Alternative F Modified Current Condition: Key elements are similar to...

76 FR 32886 - Control of Emissions From New Highway Vehicles and Engines; Guidance on EPA's Certification...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... production is accounted for in API's certification program and that the follow-up audit program is showing... Selective Catalytic Reduction Technology AGENCY: Environmental Protection Agency (EPA). ACTION: Request for... reduction (SCR) technology to meet emission standards for oxides of nitrogen (NO X ). This draft guidance...

CAD/CAM. High-Technology Training Module.

ERIC Educational Resources Information Center

Zuleger, Robert

This high technology training module is an advanced course on computer-assisted design/computer-assisted manufacturing (CAD/CAM) for grades 11 and 12. This unit, to be used with students in advanced drafting courses, introduces the concept of CAD/CAM. The content outline includes the following seven sections: (1) CAD/CAM software; (2) computer…

A Critical Review of the Massachusetts Next Generation Science and Technology/Engineering Standards. Policy Brief

ERIC Educational Resources Information Center

Metzenberg, Stan

2015-01-01

Stan Metzenberg offers a critical analysis of the draft "Massachusetts Science and Technology/Engineering Standards," which are for pre-Kindergarten to Grade 8 and introductory high school courses. Metzenberg claims that the document reveals significant, unacceptable gaps in science content, as well as some notable errors and…

SSTAC/ARTS Review of the Draft Integrated Technology Plan (ITP). Volume 2: Propulsion Systems

NASA Technical Reports Server (NTRS)

1991-01-01

The topics addressed are: (1) space propulsion technology program overview; (2) space propulsion technology program fact sheet; (3) low thrust propulsion; (4) advanced propulsion concepts; (5) high-thrust chemical propulsion; (6) cryogenic fluid management; (7) NASA CSTI earth-to-orbit propulsion; (8) advanced main combustion chamber program; (9) earth-to-orbit propulsion turbomachinery; (10) transportation technology; (11) space chemical engines technology; (12) nuclear propulsion; (13) spacecraft on-board propulsion; and (14) low-cost commercial transport.

Assessing user acceptance towards automated and conventional sink use for hand decontamination using the technology acceptance model.

PubMed

Dawson, Carolyn H; Mackrill, Jamie B; Cain, Rebecca

2017-12-01

Hand hygiene (HH) prevents harmful contaminants spreading in settings including domestic, health care and food handling. Strategies to improve HH range from behavioural techniques through to automated sinks that ensure hand surface cleaning. This study aimed to assess user experience and acceptance towards a new automated sink, compared to a normal sink. An adapted version of the technology acceptance model (TAM) assessed each mode of handwashing. A within-subjects design enabled N = 46 participants to evaluate both sinks. Perceived Ease of Use and Satisfaction of Use were significantly lower for the automated sink, compared to the conventional sink (p < 0.005). Across the remaining TAM factors, there was no significant difference. Participants suggested design features including jet strength, water temperature and device affordance may improve HH technology. We provide recommendations for future HH technology development to contribute a positive user experience, relevant to technology developers, ergonomists and those involved in HH across all sectors. Practitioner Summary: The need to facilitate timely, effective hand hygiene to prevent illness has led to a rise in automated handwashing systems across different contexts. User acceptance is a key factor in system uptake. This paper applies the technology acceptance model as a means to explore and optimise the design of such systems.

Guiding the process of health technology disinvestment.

PubMed

Ibargoyen-Roteta, Nora; Gutiérrez-Ibarluzea, Iñaki; Asua, José

2010-12-01

To develop a guideline for health technology disinvestment. The Nominal Group Technique was used to determine relevant aspects of disinvestment decision-making. Ideas reaching consensus and previous Spanish guidelines on the acquisition of new health technologies (GANT) and new genetic tests (GEN) structures were used to develop the domains and contents of GuNFT (Guideline for Not Funding Health Technologies). The draft was peer reviewed by local and international experts and their suggestions were incorporated to the first GuNFT version. Thirty-five ideas reached consensus. The most relevant ones referred to the reasons for disinvesting in a technology and the key aspects that would facilitate disinvestment acceptance. Considering both consensus ideas and GANT and GEN guidelines, the first GuNFT draft was elaborated. After the review process, section numbers and contents were changed. The resulting GuNFT guideline was finally divided into six domains related to: (1) general preliminary recommendations, (2) completing the application form, (3) checking and prioritising applications, (4) assessment, (5) final decision and (6) action plan design. A software was also developed to facilitate GuNFT implementation. Disinvestment should be a guided process. Accordingly, we present the first guideline for that purpose. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

American Power Act (Discussion of Draft)

EPA Pesticide Factsheets

To secure the energy future of the United States, to provide incentives for the domestic production of clean energy technology, to achieve meaningful pollution reductions, to create jobs, and for other purposes.

A proposed draft protocol for the European Convention on Biomedicine relating to research on the human embryo and fetus.

PubMed Central

Byk, J C

1997-01-01

The objective of this paper is to stimulate academic debate on embryo and fetal research from the perspective of the drafting of a protocol to the European Convention on Biomedicine. The Steering Committee on Bioethics of the Council of Europe was mandated to draw up such a protocol and for this purpose organised an important symposium on reproductive technologies and embryo research, in Strasbourg from the 16th to the 18th of December 1996. PMID:9055160

2011 Mississippi Curriculum Framework: Postsecondary Dental Hygiene Technology. (Program CIP: 51.0602 - Dental Hygienist)

ERIC Educational Resources Information Center

Alexander, Nick; Dunn, Catherine; Hill, Stanley; Lindsay, William

2011-01-01

As the world economy continues to evolve, businesses and industries must adopt new practices and processes in order to survive. Quality and cost control, work teams and participatory management, and an infusion of technology are transforming the way people work and do business. Employees are now expected to read, write, and communicate…

Resequencing of the common marmoset genome improves genome assemblies and gene-coding sequence analysis.

PubMed

Sato, Kengo; Kuroki, Yoko; Kumita, Wakako; Fujiyama, Asao; Toyoda, Atsushi; Kawai, Jun; Iriki, Atsushi; Sasaki, Erika; Okano, Hideyuki; Sakakibara, Yasubumi

2015-11-20

The first draft of the common marmoset (Callithrix jacchus) genome was published by the Marmoset Genome Sequencing and Analysis Consortium. The draft was based on whole-genome shotgun sequencing, and the current assembly version is Callithrix_jacches-3.2.1, but there still exist 187,214 undetermined gap regions and supercontigs and relatively short contigs that are unmapped to chromosomes in the draft genome. We performed resequencing and assembly of the genome of common marmoset by deep sequencing with high-throughput sequencing technology. Several different sequence runs using Illumina sequencing platforms were executed, and 181 Gbp of high-quality bases including mate-pairs with long insert lengths of 3, 8, 20, and 40 Kbp were obtained, that is, approximately 60× coverage. The resequencing significantly improved the MGSAC draft genome sequence. The N50 of the contigs, which is a statistical measure used to evaluate assembly quality, doubled. As a result, 51% of the contigs (total length: 299 Mbp) that were unmapped to chromosomes in the MGSAC draft were merged with chromosomal contigs, and the improved genome sequence helped to detect 5,288 new genes that are homologous to human cDNAs and the gaps in 5,187 transcripts of the Ensembl gene annotations were completely filled.

CAR: contig assembly of prokaryotic draft genomes using rearrangements.

PubMed

Lu, Chin Lung; Chen, Kun-Tze; Huang, Shih-Yuan; Chiu, Hsien-Tai

2014-11-28

Next generation sequencing technology has allowed efficient production of draft genomes for many organisms of interest. However, most draft genomes are just collections of independent contigs, whose relative positions and orientations along the genome being sequenced are unknown. Although several tools have been developed to order and orient the contigs of draft genomes, more accurate tools are still needed. In this study, we present a novel reference-based contig assembly (or scaffolding) tool, named as CAR, that can efficiently and more accurately order and orient the contigs of a prokaryotic draft genome based on a reference genome of a related organism. Given a set of contigs in multi-FASTA format and a reference genome in FASTA format, CAR can output a list of scaffolds, each of which is a set of ordered and oriented contigs. For validation, we have tested CAR on a real dataset composed of several prokaryotic genomes and also compared its performance with several other reference-based contig assembly tools. Consequently, our experimental results have shown that CAR indeed performs better than all these other reference-based contig assembly tools in terms of sensitivity, precision and genome coverage. CAR serves as an efficient tool that can more accurately order and orient the contigs of a prokaryotic draft genome based on a reference genome. The web server of CAR is freely available at http://genome.cs.nthu.edu.tw/CAR/ and its stand-alone program can also be downloaded from the same website.

78 FR 47003 - Draft National Spatial Data Infrastructure Strategic Plan; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-02

... NSDI.'' Executive Order 12906 describes the NSDI as ``the technology, policies, standards, and human resources necessary to acquire, process, store, distribute, and improve utilization of geospatial data...

De novo genome assembly of the red silk cotton tree (Bombax ceiba).

PubMed

Gao, Yong; Wang, Haibo; Liu, Chao; Chu, Honglong; Dai, Dongqin; Song, Shengnan; Yu, Long; Han, Lihong; Fu, Yi; Tian, Bin; Tang, Lizhou

2018-05-01

Bombax ceiba L. (the red silk cotton tree) is a large deciduous tree that is distributed in tropical and sub-tropical Asia as well as northern Australia. It has great economic and ecological importance, with several applications in industry and traditional medicine in many Asian countries. To facilitate further utilization of this plant resource, we present here the draft genome sequence for B. ceiba. We assembled a relatively intact genome of B. ceiba by using PacBio single-molecule sequencing and BioNano optical mapping technologies. The final draft genome is approximately 895 Mb long, with contig and scaffold N50 sizes of 1.0 Mb and 2.06 Mb, respectively. The high-quality draft genome assembly of B. ceiba will be a valuable resource enabling further genetic improvement and more effective use of this tree species.

Middle East Respiratory Syndrome Infection Control and Prevention Guideline for Healthcare Facilities

PubMed Central

Kim, Jin Yong; Song, Joon Young; Yoon, Young Kyung; Choi, Seong-Ho; Song, Young Goo; Kim, Sung-Ran; Son, Hee-Jung; Jeong, Sun-Young; Choi, Jung-Hwa; Kim, Kyung Mi; Yoon, Hee Jung; Choi, Jun Yong; Kim, Tae Hyong; Choi, Young Hwa; Kim, Hong Bin; Yoon, Ji Hyun; Lee, Jacob; Eom, Joong Sik; Lee, Sang-Oh; Oh, Won Sup; Choi, Jung-Hyun; Yoo, Jin-Hong; Kim, Woo Joo

2015-01-01

Middle East Respiratory Syndrome (MERS) is an acute viral respiratory illness with high mortality caused by a new strain of betacoronavirus (MERS-CoV). Since the report of the first patient in Saudi Arabia in 2012, large-scale outbreaks through hospital-acquired infection and inter-hospital transmission have been reported. Most of the patients reported in South Korea were also infected in hospital settings. Therefore, to eliminate the spread of MERS-CoV, infection prevention and control measures should be implemented with rigor. The present guideline has been drafted on the basis of the experiences of infection control in the South Korean hospitals involved in the recent MERS outbreak and on domestic and international infection prevention and control guidelines. To ensure efficient MERS-CoV infection prevention and control, care should be taken to provide comprehensive infection control measures including contact control, hand hygiene, personal protective equipment, disinfection, and environmental cleaning. PMID:26788414

Middle East Respiratory Syndrome Infection Control and Prevention Guideline for Healthcare Facilities.

PubMed

Kim, Jin Yong; Song, Joon Young; Yoon, Young Kyung; Choi, Seong-Ho; Song, Young Goo; Kim, Sung-Ran; Son, Hee-Jung; Jeong, Sun-Young; Choi, Jung-Hwa; Kim, Kyung Mi; Yoon, Hee Jung; Choi, Jun Yong; Kim, Tae Hyong; Choi, Young Hwa; Kim, Hong Bin; Yoon, Ji Hyun; Lee, Jacob; Eom, Joong Sik; Lee, Sang-Oh; Oh, Won Sup; Choi, Jung-Hyun; Yoo, Jin-Hong; Kim, Woo Joo; Cheong, Hee Jin

2015-12-01

Middle East Respiratory Syndrome (MERS) is an acute viral respiratory illness with high mortality caused by a new strain of betacoronavirus (MERS-CoV). Since the report of the first patient in Saudi Arabia in 2012, large-scale outbreaks through hospital-acquired infection and inter-hospital transmission have been reported. Most of the patients reported in South Korea were also infected in hospital settings. Therefore, to eliminate the spread of MERS-CoV, infection prevention and control measures should be implemented with rigor. The present guideline has been drafted on the basis of the experiences of infection control in the South Korean hospitals involved in the recent MERS outbreak and on domestic and international infection prevention and control guidelines. To ensure efficient MERS-CoV infection prevention and control, care should be taken to provide comprehensive infection control measures including contact control, hand hygiene, personal protective equipment, disinfection, and environmental cleaning.

Human life support during interplanetary travel and domicile. IV - Mars expedition technology trade study

NASA Technical Reports Server (NTRS)

Rohatgi, Naresh K.; Ferrall, Joseph F.; Seshan, P. K.

1991-01-01

Results of trading processing technologies in a closed-loop configuration, in terms of power and weight for the Mars Expedition Mission, are presented. The technologies were traded and compared to a baseline set for functional elements that include CO2 removal, H2O electrolysis, potable H2O cleanup, and hygiene H2O cleanup. These technologies were selected from those being considered for Space Station Freedom and represent only chemical/physical technologies. Attention is given to the technology trade calculation scheme, technology data and selection, the generic modular flow schematic, and life support system specifications.

Yucca Mountain nuclear waste repository prompts heated congressional hearing

NASA Astrophysics Data System (ADS)

Showstack, Randy

2011-11-01

Although the final report of the Blue Ribbon Commission on America's Nuclear Future is not expected until January 2012, the tentative conclusions of the commission's draft report were dissected during a recent joint hearing by two subcommittees of the House of Representatives' Committee on Science, Space, and Technology. Among the more heated issues debated at the hearing was the fate of the stalled Yucca Mountain nuclear waste repository in Nevada. The Blue Ribbon Commission's (BRC) draft report includes recommendations for managing nuclear waste and for developing one or more permanent deep geological repositories and interim storage facilities, but the report does not address the future of Yucca Mountain. The BRC charter indicates that the commission is to "conduct a comprehensive review of policies for managing the back end of the nuclear fuel cycle." However, the draft report states that the commission was not asked to consider, and therefore did not address, several key issues. "We have not rendered an opinion on the suitability of the Yucca Mountain site or on the request to withdraw the license application for Yucca Mountain," the draft report states.

High Speed Digital Camera Technology Review

NASA Technical Reports Server (NTRS)

Clements, Sandra D.

2009-01-01

A High Speed Digital Camera Technology Review (HSD Review) is being conducted to evaluate the state-of-the-shelf in this rapidly progressing industry. Five HSD cameras supplied by four camera manufacturers participated in a Field Test during the Space Shuttle Discovery STS-128 launch. Each camera was also subjected to Bench Tests in the ASRC Imaging Development Laboratory. Evaluation of the data from the Field and Bench Tests is underway. Representatives from the imaging communities at NASA / KSC and the Optical Systems Group are participating as reviewers. A High Speed Digital Video Camera Draft Specification was updated to address Shuttle engineering imagery requirements based on findings from this HSD Review. This draft specification will serve as the template for a High Speed Digital Video Camera Specification to be developed for the wider OSG imaging community under OSG Task OS-33.

75 FR 42466 - Notice of Availability of Draft Environmental Impact Statement and Public Meeting for the AREVA...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-21

... electrical transmission line required to power the proposed EREF. On March 17, 2010, the NRC granted an... facility. Specifically, AES proposes to use gas centrifuge technology to enrich the uranium-235 isotope... centrifuge-based technology to enrich the uranium- 235 isotope found in natural uranium to concentrations up...

Holistic Assessment and Ethical Disputation on a New Trend in Solid Biofuels.

PubMed

Hašková, Simona

2017-04-01

A new trend in the production technology of solid biof uels has appeared. There is a wide consensus that most solid biofuels will be produced according to the new production methods within a few years. Numerous samples were manufactured from agro-residues according to conventional methods as well as new methods. Robust analyses that reviewed the hygienic, environmental, financial and ethical aspects were performed. The hygienic and environmental aspect was assessed by robust chemical and technical analyses. The financial aspect was assessed by energy cost breakdown. The ethical point of view was built on the above stated findings, the survey questionnaire and critical discussion with the literature. It is concluded that the new production methods are significantly favourable from both the hygienic and environmental points of view. Financial indicators do not allow the expressing of any preference. Regarding the ethical aspect, it is concluded that the new methods are beneficial in terms of environmental responsibility. However, it showed that most of the customers that took part in the survey are price oriented and therefore they tend to prefer the cheaper-conventional alternative. In the long term it can be assumed that expansion of the new technology and competition among manufacturers will reduce the costs.

Teledentistry-assisted, affiliated practice for dental hygienists: an innovative oral health workforce model.

PubMed

Summerfelt, Fred F

2011-06-01

The 2010 U.S. Patient Protection and Affordable Care Act (PPACA) calls for training programs to develop mid-level dental health care providers to work in areas with underserved populations. In 2004, legislation was passed in Arizona allowing qualified dental hygienists to enter into an affiliated practice relationship with a dentist to provide oral health care services for underserved populations without general or direct supervision in public health settings. In response, the Northern Arizona University (NAU) Dental Hygiene Department developed a teledentistry-assisted, affiliated practice dental hygiene model that places a dental hygienist in the role of the mid-level practitioner as part of a digitally linked oral health care team. Utilizing current technologies, affiliated practice dental hygienists can digitally acquire and transmit diagnostic data to a distant dentist for triage, diagnosis, and patient referral in addition to providing preventive services permitted within the dental hygiene scope of practice. This article provides information about the PPACA and the Arizona affiliated practice dental hygiene model, defines teledentistry, identifies the digital equipment used in NAU's teledentistry model, give an overview of NAU's teledentistry training, describes NAU's first teledentistry clinical experience, presents statistical analyses and evaluation of NAU students' ability to acquire diagnostically efficacious digital data from remote locations, and summarizes details of remote applications of teledentistry-assisted, affiliated practice dental hygiene workforce model successes.

China Report, Science and Technology

DTIC Science & Technology

1985-06-11

ZHIYEBING ZAZHI tCHINESE JOURNAL OF INDUSTRIAL HYGIENE AND OCCUPATIONAL DISEASES!, No 1, 20 Feb 85 148 YICHUAN XUEBAO TACTA GENETICA SINICAJ, No 1...markets, all cities and counties should enthusiastically create conditions , substanti- ate strength, and augment the equipment to gradually develop... conditions should concentrate certain production capacity and certain technological force on developing new tech- nology and set up and improve the

NASA Space Technology Roadmaps and Priorities: Restoring NASA's Technological Edge and Paving the Way for a New Era in Space

NASA Technical Reports Server (NTRS)

2012-01-01

Success in executing future NASA space missions will depend on advanced technology developments that should already be underway. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development, and NASA's technology base is largely depleted. As noted in a recent National Research Council report on the U.S. civil space program: Future U.S. leadership in space requires a foundation of sustained technology advances that can enable the development of more capable, reliable, and lower-cost spacecraft and launch vehicles to achieve space program goals. A strong advanced technology development foundation is needed also to enhance technology readiness of new missions, mitigate their technological risks, improve the quality of cost estimates, and thereby contribute to better overall mission cost management. Yet financial support for this technology base has eroded over the years. The United States is now living on the innovation funded in the past and has an obligation to replenish this foundational element. NASA has developed a draft set of technology roadmaps to guide the development of space technologies under the leadership of the NASA Office of the Chief Technologist. The NRC appointed the Steering Committee for NASA Technology Roadmaps and six panels to evaluate the draft roadmaps, recommend improvements, and prioritize the technologies within each and among all of the technology areas as NASA finalizes the roadmaps. The steering committee is encouraged by the initiative NASA has taken through the Office of the Chief Technologist (OCT) to develop technology roadmaps and to seek input from the aerospace technical community with this study.

Toward the MIL-STD and MIL-HDBK for Project Support Environment Interfaces

DTIC Science & Technology

1992-11-01

acquisition and budget process in the past has taken a long time to field new standard computers, so long that the produced technology is often old...compared to commercial technology . The obvious logistics benefits associated with standard hardware are offset by the inability to field current... technology area. The Standard and Handbook Writing Team is tasked with actually writing the draft military standard and handbook. 3. PSESWG STANDARD The

75 FR 14206 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-24

... commercial nuclear power plants (NPPs), electric power companies, and any person eligible under the Atomic... or other forms of information technology? A copy of the draft supporting statement may be viewed free...

78 FR 72873 - Availability of 2014-2018 Draft Strategic Plan and Request for Public Comment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-12-04

... energy, environmental, and nuclear security of the United States; promoting scientific and technological innovation in support of that mission; sponsoring basic research in the physical sciences; [[Page 72874

Molecular cartography of the human skin surface in 3D.

PubMed

Bouslimani, Amina; Porto, Carla; Rath, Christopher M; Wang, Mingxun; Guo, Yurong; Gonzalez, Antonio; Berg-Lyon, Donna; Ackermann, Gail; Moeller Christensen, Gitte Julie; Nakatsuji, Teruaki; Zhang, Lingjuan; Borkowski, Andrew W; Meehan, Michael J; Dorrestein, Kathleen; Gallo, Richard L; Bandeira, Nuno; Knight, Rob; Alexandrov, Theodore; Dorrestein, Pieter C

2015-04-28

The human skin is an organ with a surface area of 1.5-2 m(2) that provides our interface with the environment. The molecular composition of this organ is derived from host cells, microbiota, and external molecules. The chemical makeup of the skin surface is largely undefined. Here we advance the technologies needed to explore the topographical distribution of skin molecules, using 3D mapping of mass spectrometry data and microbial 16S rRNA amplicon sequences. Our 3D maps reveal that the molecular composition of skin has diverse distributions and that the composition is defined not only by skin cells and microbes but also by our daily routines, including the application of hygiene products. The technological development of these maps lays a foundation for studying the spatial relationships of human skin with hygiene, the microbiota, and environment, with potential for developing predictive models of skin phenotypes tailored to individual health.

Molecular cartography of the human skin surface in 3D

PubMed Central

Bouslimani, Amina; Porto, Carla; Rath, Christopher M.; Wang, Mingxun; Guo, Yurong; Gonzalez, Antonio; Berg-Lyon, Donna; Ackermann, Gail; Moeller Christensen, Gitte Julie; Nakatsuji, Teruaki; Zhang, Lingjuan; Borkowski, Andrew W.; Meehan, Michael J.; Dorrestein, Kathleen; Gallo, Richard L.; Bandeira, Nuno; Knight, Rob; Alexandrov, Theodore; Dorrestein, Pieter C.

2015-01-01

The human skin is an organ with a surface area of 1.5–2 m2 that provides our interface with the environment. The molecular composition of this organ is derived from host cells, microbiota, and external molecules. The chemical makeup of the skin surface is largely undefined. Here we advance the technologies needed to explore the topographical distribution of skin molecules, using 3D mapping of mass spectrometry data and microbial 16S rRNA amplicon sequences. Our 3D maps reveal that the molecular composition of skin has diverse distributions and that the composition is defined not only by skin cells and microbes but also by our daily routines, including the application of hygiene products. The technological development of these maps lays a foundation for studying the spatial relationships of human skin with hygiene, the microbiota, and environment, with potential for developing predictive models of skin phenotypes tailored to individual health. PMID:25825778

[Hygienic assessment of conditions of the exploitation of facilities of the urban drainage system].

PubMed

Alikbayeva, L A; Iakubova, I Sh; Ryzhkov, A L; Lavrinova, A A; Sidorov, A A

The aim of the study was the hygienic characteristics of the location of sewage pumping stations (SPSs) in the residential area of the city and the assessment of working conditions for the staff. The features of the technological process at the SPSs resulted in the formation of specific working conditions characterized by the presence of a cooling microclimate, noise production, technological vibration, air pollution by microorganisms. The assessment of working conditions has allowed to refer them to the 3 class (harmful working conditions) of the 2 and 3 degree. Preventive measures for SPSs should include the use of equipment for cleaning the air of working zone, having a combined odourremoving and microbicidal action; the automation of the labor process; the installation of additional equipment for filtering air circulating in workplaces and emitting into the atmosphere; provision of sealing equipment with the use of noise insulating materials.

Guideline series: Control of volatile organic compound emissions from wood furniture manufacturing operations. Draft report

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1995-08-01

This draft Control Techniques Guidelines (CTG) provides necessary guidance for development of regulations to limit emissions of volatile organic compounds (VOC`s) from wood furniture finishing and cleaning operations. This guidance includes emission limits for specific wood furniture finishing steps and work pratices to reduce waste and evaporation through pollution prevention methods; these represent reasonably available control technology for wood furniture finishing and cleaning operations. This document is intended to provide State and local air pollution authorities with an information base for proceeding with their own analyses of RACT to meet statutory requirements.

NANOTECHNOLOGY WHITE PAPER | Science Inventory | US ...

EPA Pesticide Factsheets

Nanotechnology is the science of manipulating materials at the atomic and molecular level to develop new or enhanced materials and products. In December 2004, EPA’s Science Policy Council created a cross-Agency workgroup to identify and describe the issues EPA must address to ensure protection of human health and the environment as this new technology is developed. The draft white paper on nanotechnology is the product of the workgroup. The draft white paper describes the technology, and provides a discussion of the potential environmental benefits of nanotechnology and its applications that can foster sustainable use of resources. Risk management issues and the Agency’s statutory mandates are outlined, followed by an extensive discussion of risk assessment issues. The paper identifies research needs for both environmental applications and implications of nanotechnology and concludes with recommendations on next steps for addressing science policy issues and research needs. Supplemental information is provided in a number of appendices. The Agency will use the white paper to address research needs and risk assessment issues concerning nanotechnology. The draft white paper will undergo independent expert review, which will be conducted in the February time frame. All public comments received by January 31, 2006 will be submitted to the external review panel for their consideration. Comments received beyond that time will be considered by EPA. Follo

The draft genome of MD-2 pineapple using hybrid error correction of long reads

PubMed Central

Redwan, Raimi M.; Saidin, Akzam; Kumar, S. Vijay

2016-01-01

The introduction of the elite pineapple variety, MD-2, has caused a significant market shift in the pineapple industry. Better productivity, overall increased in fruit quality and taste, resilience to chilled storage and resistance to internal browning are among the key advantages of the MD-2 as compared with its previous predecessor, the Smooth Cayenne. Here, we present the genome sequence of the MD-2 pineapple (Ananas comosus (L.) Merr.) by using the hybrid sequencing technology from two highly reputable platforms, i.e. the PacBio long sequencing reads and the accurate Illumina short reads. Our draft genome achieved 99.6% genome coverage with 27,017 predicted protein-coding genes while 45.21% of the genome was identified as repetitive elements. Furthermore, differential expression of ripening RNASeq library of pineapple fruits revealed ethylene-related transcripts, believed to be involved in regulating the process of non-climacteric pineapple fruit ripening. The MD-2 pineapple draft genome serves as an example of how a complex heterozygous genome is amenable to whole genome sequencing by using a hybrid technology that is both economical and accurate. The genome will make genomic applications more feasible as a medium to understand complex biological processes specific to pineapple. PMID:27374615

THE MAN MADE WORLD, A HIGH SCHOOL COURSE ON THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION.

ERIC Educational Resources Information Center

Commission on Engineering Education, Washington, DC.

THIS STUDENTS' MANUAL FOR THE ENGINEERING CONCEPTS CURRICULUM PROJECT'S (ECCP) HIGH SCHOOL COURSE, "THE MAN MADE WORLD," IS THE THIRD DRAFT OF THE EXPERIMENTAL VERSION. THE MATERIAL WRITTEN BY SCIENTISTS, ENGINEERS, AND EDUCATORS, EMPHASIZES THE THEORIES AND TECHNIQUES WHICH CONTRIBUTE TO OUR TECHNOLOGICAL CIVILIZATION. RESOURCES OF THE MAN-MADE…

Medical technologies in developing countries: a feasibility study on the maintenance of medical equipment in Ethiopia.

PubMed

Bracale, M; Pepino, A

1994-03-01

The authors report the results of a feasibility study, sponsored by the Italian Foreign Ministry, of setting up a Regional Centre for the Management and Maintenance of Medical Technologies in Ethiopia. After some general considerations regarding the problems of co-operation in this field, the authors draft some concrete proposals for an operative programme.

Systems Security Engineering

DTIC Science & Technology

2010-08-22

practice for information security management ( ISO /IEC 27002 ),” “Information technology — Security techniques — Information security management...systems —Requirements ( ISO /IEC 27002 ),”, “Information technology — Security techniques — Information security risk management ( ISO /IEC 27005).” from...associated practice aids. Perhaps the most germane discovery from this effort was a draft ISO standard on Systems and software engineering, Systems and

IVHS: Potential Impact On Disadvantaged Communities, IVHS Draft

DOT National Transportation Integrated Search

1994-06-01

THIS PAPER EXPLORES THE IMPACT OF TRANSPORTATION TECHNOLOGIES ON THE SOCIAL AND ECONOMIC WELL-BEING OF CENTRAL CITY RESIDENTS AND DISADVANTAGED POPULATIONS. THOUGH MEMBERS OF POOR COMMUNITIES HAVE LITTLE POLITICAL POWER OR INPUT INTO THE DECISION-MAK...

Industrial Education Curriculum.

ERIC Educational Resources Information Center

Alaska State Dept. of Education, Juneau. Div. of Adult and Vocational Education.

This handbook contains a competency-based curriculum for teaching industrial education in Alaska. Competencies are listed for the following areas: employability, auto maintenance, building maintenance, commercial fishing, communications, construction, drafting, electronics, energy and power, forestry and logging, graphics, high technology,…

ABACAS: algorithm-based automatic contiguation of assembled sequences

PubMed Central

Assefa, Samuel; Keane, Thomas M.; Otto, Thomas D.; Newbold, Chris; Berriman, Matthew

2009-01-01

Summary: Due to the availability of new sequencing technologies, we are now increasingly interested in sequencing closely related strains of existing finished genomes. Recently a number of de novo and mapping-based assemblers have been developed to produce high quality draft genomes from new sequencing technology reads. New tools are necessary to take contigs from a draft assembly through to a fully contiguated genome sequence. ABACAS is intended as a tool to rapidly contiguate (align, order, orientate), visualize and design primers to close gaps on shotgun assembled contigs based on a reference sequence. The input to ABACAS is a set of contigs which will be aligned to the reference genome, ordered and orientated, visualized in the ACT comparative browser, and optimal primer sequences are automatically generated. Availability and Implementation: ABACAS is implemented in Perl and is freely available for download from http://abacas.sourceforge.net Contact: sa4@sanger.ac.uk PMID:19497936

Draft Tier 2 Environmental Impact Statement for International Space Station

NASA Technical Reports Server (NTRS)

1995-01-01

The Draft Tier 2 Environmental Impact Statement (EIS) for the International Space Station (ISS) has been prepared by the National Aeronautics and Space Administration (NASA) and follows NASA's Record of Decision on the Final Tier 1 EIS for the Space Station Freedom. The Tier 2 EIS provides an updated evaluation of the environmental impacts associated with the alternatives considered: the Proposed Action and the No-Action alternative. The Proposed Action is to continue U.S. participation in the assembly and operation of ISS. The No-Action alternative would cancel NASA's participation in the Space Station Program. ISS is an international cooperative venture between NASA, the Canadian Space Agency, the European Space Agency, the Science and Technology Agency of Japan, the Russian Space Agency, and the Italian Space Agency. The purpose of the NASA action would be to further develop a human presence in space; to meet scientific, technological, and commercial research needs; and to foster international cooperation.

Thermoplastic Adhesives based on polyolefin and olefinic copolymers

NASA Astrophysics Data System (ADS)

Paul, Rituparna

2014-03-01

H.B. Fuller has been a leading global industrial adhesive manufacturer for over 125 years. It is a company with a rich history of consistently delivering adhesive innovations for enhancing product performance in the market place. H.B. Fuller technologies/products find application in several markets including packaging, personal hygiene and nonwovens, durable assembly and electronics. In this presentation, H. B. Fuller's technology innovation journey will be shared with emphasis on groundbreaking technologies/products based on polyolefin and olefin copolymers.

Food and waste management biotechnology for the space shuttle

NASA Technical Reports Server (NTRS)

Murray, R. W.; Schelkopf, J. D.; Hunt, S. R.; Sauer, R. L.

1979-01-01

Space-crew facilities for preparation, eating, personal hygiene and waste management are contained in one small area of the Shuttle Orbiter Mid-Deck, all the functional systems being interconnected. The paper discusses three major systems: (1) the Galley, which includes the personal hygiene station and food packages; (2) the Waste Collector, which includes provisions for male and female users, urine, feces and emesis collection in both a normal and contigency mode of operation; and (3) Biowaste Monitoring, which includes mass measurement and sampling. The technology improvement continues by assuring that the Orbiter systems have sufficient design flexibility to permit later improvements in operation and in function.

[The industrial environment in the electric-furnace steel smelting, converter and open-hearth furnace methods of manufacturing manganese-alloyed steels].

PubMed

Karnaukh, N G; Petrov, G A; Gapon, V A; Poslednichenko, I P; Shmidt, S E

1992-01-01

Inspection of the environment in manganese-alloyed steel production showed inadequate hygienic conditions of the technological processes employed. Air was more polluted by manganese oxides during the oxygen-converter process though their highest concentrations, 38 times exceeding the MAS, appeared during the casting of steel. An electric furnace coated by dust-noise-proof material and gas cleaning is preferable from a hygienic point of view. The influence of unfavourable microclimate, intensive infrared irradiation and loud noise on workers necessitates automation and mechanization of the process in order to improve the working conditions.

Draft material : enhanced freight movement at domestic and international gateways

DOT National Transportation Integrated Search

1997-07-01

The purpose of this report is to provide a framework for integrating the core program activities that constitute the National Science and Technology Councils (NSTCs) public-private initiative to improve freight movement at domestic and internat...

75 FR 48996 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-12

..., doses to an embryo/fetus or nursing child, or leaking sources are reportable on occurrence. A certifying... information technology? A copy of the draft supporting statement may be viewed free of charge at the NRC...

Fuel Cell Transit Bus Coordination and Evaluation Plan California Fuel Cell Transit Evaluation Team, DRAFT

DOT National Transportation Integrated Search

2003-10-29

The objective of the DOE/NREL evaluation program is to provide comprehensive, unbiased evaluation results of advanced technology vehicle development and operations, evaluation of hydrogen infrastructure development and operation, and descriptions of ...

Educational Programs in the Health Field.

ERIC Educational Resources Information Center

Hospitals, 1971

1971-01-01

This document lists by location educational programs in the health field in the United States and Canada. Areas covered include Certified Laboratory Assistant Programs, Cytotechnology, Dental Hygiene, Dentistry, Dietetics, Hospital Administration, Inhalation Therapy, Library Science, Medical Illustration, Medical Records, Medical Technology,…

A Survey of CAD/CAM Technology Applications in the U.S. Shipbuilding Industry

DTIC Science & Technology

1984-01-01

operation for drafting. Computer Aided Engineering (CAE) analysis is used primarily to determine the validity of design characteristics and produc- tion...include time standard generation, sea trial analysis , and group Systems integration While no systems surveyed Aided Design (CAD) is the technology... analysis . is the largest problem involving software packages. are truly integrated, many are interfaced. Computer most interfaced category with links

Molten Boron Phase-Change Thermal Energy Storage: Containment and Applicability to Microsatellites (Draft)

DTIC Science & Technology

2011-06-01

technologies, including high temperature thermal insulation and thermal to electric power conversion, have been evaluated, and a preliminary design...support technologies, including high temperature thermal insulation and thermal to electric power conversion, have been evaluated, and a preliminary...vacuum gap with low emissivity surfaces on either side as the first insulating layer.11 D. Electrical Energy Conversion There are a wide variety

Surveying Florida MPO readiness to incorporate innovative technologies into long range transportation plans : draft final report.

DOT National Transportation Integrated Search

2016-08-01

There is optimism that Automated Vehicles (AVs) can improve the safety of the transportation system, : reduce congestion, increase reliability, offer improved mobility solutions to all segments of the population : including the transportation-disadva...

78 FR 63464 - Notice of Extension of the Public Comment Period on the Draft Toxicological Review of Benzo[a...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

... substances; this information is then used to support risk management decisions designed to protect public... American Railroads, and the Pavement Coatings Technology Council. The EPA believes this extension will...

Technician Program Uses Advanced Instruments.

ERIC Educational Resources Information Center

Stinson, Stephen

1981-01-01

Describes various aspects of a newly-developed computer-assisted drafting/computer-assisted manufacture (CAD/CAM) facility in the chemical engineering technology department at Broome Community College, Binghamton, New York. Stresses the use of new instruments such as microcomputers and microprocessor-equipped instruments. (CS)

15 CFR 740.12 - Gift parcels and humanitarian donations (GFT).

Code of Federal Regulations, 2014 CFR

2014-01-01

... destinations, no items controlled for chemical and biological weapons (CB), missile technology (MT), national... (including vitamins); medicines, medical supplies and devices (including hospital supplies and equipment and... hygiene items; seeds; veterinary medicines and supplies; fishing equipment and supplies; soap-making...

15 CFR 740.12 - Gift parcels and humanitarian donations (GFT).

Code of Federal Regulations, 2012 CFR

2012-01-01

... destinations, no items controlled for chemical and biological weapons (CB), missile technology (MT), national... (including vitamins); medicines, medical supplies and devices (including hospital supplies and equipment and... hygiene items; seeds; veterinary medicines and supplies; fishing equipment and supplies; soap-making...

eBug--teaching children hygiene principles using educational games.

PubMed

Kostkova, Patty; Farrell, David; de Quincey, Ed; Weinberg, Julius; Lecky, Donna; McNulty, Cliodna

2010-01-01

Technology enhanced education has been recently established as a new approach for all stages of education. However, among these new IT media it is computer games playing the central role in delivering education in particular to children and teenagers, however, real world sound evaluation is often given little attention. The EU funded e-Bug project developed web games aimed at children to teach basic principles of prudent antibiotics use, hand and respiratory hygiene and aims to reinforces an awareness of microbes, hand and respiratory hygiene among junior and senior school children in 10 countries in Europe. An educational pack implemented in schools across Europe is complemented by Internet web games for two age groups teaching a set of learning objectives (LOs) using a fast and interactive platform game design for junior children and investigate detective games based on PBL principles for senior children. In this paper, we present the design of e-Bug junior and senior games and evaluation results.

Building health: The need for electromagnetic hygiene?

NASA Astrophysics Data System (ADS)

Jamieson, Isaac A.; Holdstock, Paul; ApSimon, Helen M.; Bell, J. Nigel B.

2010-04-01

Whilst the electromagnetic nature of the built environment has changed considerably over the past century, little thought is at present given to the possible advantages of creating electromagnetic microenvironments that more closely resemble those found in nature and/or developing biologically-friendly technology aligned more closely to its operating principles. This review paper examines how more natural exposures to a variety of electromagnetic phenomena could be re-introduced into the built environment, possible benefits that might arise, and discusses the extent to which there may be tangible benefits obtainable from introducing more rigorous properly considered electromagnetic hygiene measures. Amongst the matters discussed are: the effects of different materials, finishes and electrical items on charge generation (and the effects of excess charge on contaminant deposition); the possible benefits of suitably grounding conductive objects (including humans) in order to reduce excess charge and contaminant deposition; how the presence of vertical electric field regimes, similar to those found in nature, may enhance biological performance; and possible pitfalls to avoid when seeking to introduce appropriate electromagnetic hygiene regimes.

Effect of a Simulation Exercise on Restorative Identification Skills of First Year Dental Hygiene Students.

PubMed

Lemaster, Margaret; Flores, Joyce M; Blacketer, Margaret S

2016-02-01

This study explored the effectiveness of simulated mouth models to improve identification and recording of dental restorations when compared to using traditional didactic instruction combined with 2-dimensional images. Simulation has been adopted into medical and dental education curriculum to improve both student learning and patient safety outcomes. A 2-sample, independent t-test analysis of data was conducted to compare graded dental recordings of dental hygiene students using simulated mouth models and dental hygiene students using 2-dimensional photographs. Evaluations from graded dental charts were analyzed and compared between groups of students using the simulated mouth models containing random placement of custom preventive and restorative materials and traditional 2-dimensional representations of didactically described conditions. Results demonstrated a statistically significant (p≤0.0001) difference: for experimental group, students using the simulated mouth models to identify and record dental conditions had a mean of 86.73 and variance of 33.84. The control group students using traditional 2-dimensional images mean graded dental chart scores were 74.43 and variance was 14.25. Using modified simulation technology for dental charting identification may increase level of dental charting skill competency in first year dental hygiene students. Copyright © 2016 The American Dental Hygienists’ Association.

Integrating photo-stimulable phosphor plates into dental and dental hygiene radiography curricula.

PubMed

Tax, Cara L; Robb, Christine L; Brillant, Martha G S; Doucette, Heather J

2013-11-01

It is not known whether the integration of photo-stimulable phosphor (PSP) plates into dental and dental hygiene curricula creates unique learning challenges for students. The purpose of this two-year study was to determine if dental hygiene students had more and/or different types of errors when using PSP plates compared to film and whether the PSP imaging plates had any particular characteristics that needed to be addressed in the learning process. Fifty-nine first-year dental hygiene students at one Canadian dental school were randomly assigned to two groups (PSP or film) before exposing their initial full mouth series on a teaching manikin using the parallel technique. The principal investigator determined the number and types of errors based on a specific set of performance criteria. The two groups (PSP vs. film) were compared for total number and type of errors made. Results of the study indicated the difference in the total number of errors made using PSP or film was not statistically significant; however, there was a difference in the types of errors made, with the PSP group having more horizontal errors than the film group. In addition, the study identified a number of unique characteristics of the PSP plates that required special consideration for teaching this technology.

Predictors of vaginal practices for sex and hygiene in KwaZulu-Natal, South Africa: findings of a household survey and qualitative inquiry.

PubMed

Scorgie, Fiona; Smit, Jennifer A; Kunene, Busisiwe; Martin-Hilber, Adriane; Beksinska, Mags; Chersich, Matthew F

2011-04-01

Vaginal practices in sub-Saharan Africa may increase HIV transmission and have important implications for development of microbicides and future HIV prevention technologies. It remains unclear which women undertake vaginal practices and what factors predict prevalence, practice type and choice of products. Using cross-sectional data from mixed research methods, we identify factors associated with vaginal practices among women in KwaZulu-Natal, South Africa. Data were gathered through focus group discussions, in-depth and key-informant interviews, followed by a province-wide, multi-stage cluster household survey, using structured questionnaires in face-to-face interviews with 867 women. This paper details six types of vaginal practices, which--despite their individual distinctiveness and diverse motivations--may be clustered into two broad groups: those undertaken for purposes of 'hygiene' (genital washing, douching and application) and those for 'sexual motivations' (application, insertion, ingestion and incisions). Multivariate analysis found significant associations between 'hygiene' practices and media access, religiosity and transactional sex. 'Sexual' practices were associated with partner concurrency, religiosity and use of injectable hormonal contraceptives. Future interventions relating to vaginal practices as well as microbicides need to reflect this characterisation of practices as sexual- and/or hygiene-related.

MECHANICAL DRAFTING AND DESIGN TECHNOLOGY, JOB DESCRIPTIONS AND SUGGESTED TECHNIQUES FOR DETERMINING COURSES OF STUDY IN VOCATIONAL EDUCATION PROGRAMS.

ERIC Educational Resources Information Center

PETERSON, CLARENCE E.

THIS IS THE FIRST OF A SERIES DESIGNED TO PROVIDE AID TO STATES IN ORGANIZING AND OPERATING PROGRAMS UNDER TITLE VIII OF THE NATIONAL DEFENSE EDUCATION ACT, PUBLIC LAW 85-864. IT FURNISHES--(1) GENERAL INFORMATION ABOUT A TECHNOLOGY OR BROAD FIELD OF WORK, (2) COMPOSITE JOB DESCRIPTIONS OF REPRESENTATIVE OCCUPATIONS IN THAT FIELD OF WORK, (3) A…

Services and the National Information Infrastructure. Report of the Information Infrastructure Task Force Committee on Applications and Technology, Technology Policy Working Group. Draft for Public Comment.

ERIC Educational Resources Information Center

Office of Science and Technology Policy, Washington, DC.

In this report, the National Information Infrastructure (NII) services issue is addressed, and activities to advance the development of NII services are recommended. The NII is envisioned to grow into a seamless web of communications networks, computers, databases, and consumer electronics that will put vast amounts of information at users'…

New Technology Drafts: Production and Improvements

ScienceCinema

Lapidus, Alla

2018-01-22

Alla Lapidus, head of the DOE Joint Genome Institute's Finishing group, gives a talk on how the DOE JGI's microbial genome sequencing pipeline has been adapted to accommodate next generation sequencing platforms at the "Sequencing, Finishing, Analysis in the Future" meeting in Santa Fe, NM.

Computer-Integrated Manufacturing Technology. Tech Prep Competency Profile.

ERIC Educational Resources Information Center

Lakeland Tech Prep Consortium, Kirtland, OH.

This tech prep competency profile covers these occupations: manufacturing technician, computer-assisted design and drafting (CADD) technician, quality technician, and mechanical technician. Section 1 provides occupation definitions. Section 2 lists development committee members. Section 3 provides the leveling codes---abbreviations for grade level…

Data Model as an Architectural View

DTIC Science & Technology

2009-10-01

store order - processing system. Logical. The logical data model is an evolution of the conceptual data model towards a data management technology (e.g...online store order - processing system at different stages. Perhaps the first draft was elaborated by the architect during discussion of requirements

75 FR 32535 - ITS Joint Program Office; IntelliDriveSM

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-08

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; IntelliDrive\\SM\\ Deployment Scenarios Workshop; Notice of Workshop AGENCY: Research and Innovative Technology Administration, Department of... participants to identify advantages and disadvantages of each of the draft scenarios and critical policy and...

Best Practice Guidelines for Computer Technology in the Montessori Early Childhood Classroom.

ERIC Educational Resources Information Center

Montminy, Peter

1999-01-01

Presents a draft for a principle-centered position statement of a Montessori early childhood program in central Pennsylvania, on the pros and cons of computer use in a Montessori 3-6 classroom. Includes computer software rating form. (Author/KB)

[Protection of working mothers: operational guide document. The Marche Regional Section of the Italian Society of Occupational Health and Industrial Hygiene (SIMLII) ].

PubMed

Alessandroni, Morena; Balzani, Barbara; Cancellieri, Francesca; Colao, Annamaria; Comai, M; Elezi, Lindita; Mengucci, Rosella; Montesi, Simona; Olivi, Cinzia; Perticaroli, Patrizia; Pettinari, A; Ruschioni, Angela

2013-01-01

Protection of working mothers: operational guide document. The aim of this operational guide document is to protect the health of working mothers and their babies during pregnancy, puerperium and breastfeeding. The project was developed by a technical working group which included professionals in the pertinent fields from the Workplace Prevention and Safety Services of the local Vasta-2 Area of the Marche Regional Health Service:physicians, health assistants, and nurses. It is considered to be a useful tool for risk assessment at the workplace aimed at professionals who are involved, with various duties and responsibilities, in the health care of the working mother. This paper consists of two functionally related sections, "Table of risks" and "Technical specifications". In the "Table of Risks" section, the occupational hazards for women during pregnancy or postpartum were analyzed with the highest possible degree of care. To this end the technical group provided, for each occupational hazard, its own operational suggestions, in relation to legislation, current scientific knowledge and Guidelines of other Italian Regions. The Marche Regional Section of the Italian Society of Occupational Health and Industrial Hygiene (SIMLII) participated in the final draft of the entire document. The second section, "Technical Specifications", illustrates the main tasks and any risks involved in the 34 manufacturing sectors most prevalent in this area. This operational guide document is intended to be the beginning of a common strategy in public health to achieve a wider field of action in promotion and information aimed at protecting the reproductive health of working mothers.

Personal hygiene among military personnel: developing and testing a self-administered scale.

PubMed

Saffari, Mohsen; Koenig, Harold G; Pakpour, Amir H; Sanaeinasab, Hormoz; Jahan, Hojat Rshidi; Sehlo, Mohammad Gamal

2014-03-01

Good personal hygiene (PH) behavior is recommended to prevent contagious diseases, and members of military forces may be at high risk for contracting contagious diseases. The aim of this study was to develop and test a new questionnaire on PH for soldiers. Participants were all male and from different military settings throughout Iran. Using a five-stage guideline, a panel of experts in the Persian language (Farsi) developed a 21-item self-administered questionnaire. Face and content validity of the first-draft items were assessed. The questionnaire was then translated and subsequently back-translated into English, and both the Farsi and English versions were tested in pilot studies. The consistency and stability of the questionnaire were tested using Cronbach's alpha and the test-retest strategy. The final scale was administered to a sample of 502 military personnel. Explanatory and confirmatory factor analyses evaluated the structure of the scale. Both the convergent and discriminative validity of the scale were also determined. Cronbach's alpha coefficients were >0.85. Principal component analysis demonstrated a uni-dimensional structure that explained 59 % of the variance in PH behaviors. Confirmatory factor analysis indicated a good fit (goodness-of-fit index = 0.902; comparative fitness index = 0.923; root mean square error of approximation = 0.0085). The results show that this new PH scale has solid psychometric properties for testing PH behaviors among an Iranian sample of military personnel. We conclude that this scale can be a useful tool for assessing PH behaviors in military personnel. Further research is needed to determine the scale's value in other countries and cultures.

Engagement of stakeholders in the development of a Theory of Change for handwashing and sanitation behaviour change.

PubMed

De Buck, Emmy; Hannes, Karin; Cargo, Margaret; Van Remoortel, Hans; Vande Veegaete, Axel; Mosler, Hans-Joachim; Govender, Thashlin; Vandekerckhove, Philippe; Young, Taryn

2018-02-01

A Theory of Change (ToC) is an approach to map programmes aimed at inducing change in a specific context, with the goal of increasing their impact. We applied this approach to the specific case of handwashing and sanitation practices in low- and middle-income countries and developed a ToC as part of a systematic review exercise. Different existing sources of information were used to inform the initial draft of the ToC. In addition, stakeholder involvement occurred and peer review took place. Our stakeholders included methodological (ToC/quantitative and qualitative research) and content experts (WASH (Water, Sanitation, Hygiene)/behaviour change), as well as end-users/practitioners, policy-makers and donors. In conclusion, the development of a ToC, and the involvement of stakeholders in its development, was critical in terms of understanding the context in which the promotional programmes are being implemented. We recommend ToC developers to work with stakeholders to create a ToC relevant for practice.

Attitudes towards students who plagiarize: a dental hygiene faculty perspective.

PubMed

Patel-Bhakta, Hemali G; Muzzin, Kathleen B; Dewald, Janice P; Campbell, Patricia R; Buschang, Peter H

2014-01-01

The purpose of this study was to examine baccalaureate dental hygiene faculty members' attitudes and practices regarding student plagiarism. An email containing a link to a thirty-two-item survey was sent to fifty-two baccalaureate dental hygiene program directors in the United States; thirty of those agreed for their faculty members to participate. Of the 257 faculty members who received the survey link, 106 completed the survey, for a response rate of 41.2 percent. The responding faculty members reported thinking plagiarism is a rising concern in their dental hygiene programs (54.5 percent, 54/99). The majority said they check for plagiarism on student class assignment/projects (67.1 percent, 53/79). For those who did not check for plagiarism, 45.8 percent (11/24) stated it took "too much time to check" or it was "too hard to prove" (16.6 percent, 4/24). The most frequent form of student plagiarism observed by the respondents was "copying directly from a source electronically" (78.0 percent, 39/50). Most respondents reported checking for plagiarism through visual inspection (without technological assistance) (73.0 percent, 38/52). Of those who said they use plagiarism detection software/services, 44.4 percent (16/36) always recommended their students use plagiarism detection software/services to detect unintentional plagiarism. For those faculty members who caught students plagiarizing, 52.9 percent (27/51) reported they "always or often" handled the incident within their dental hygiene department, and 76.5 percent (39/51) said they had never reported the student's violation to an academic review board.

PRELIMINARY ASSESSMENT OF WORKER AND AMBIENT AIR EXPOSURES DURING SOIL REMEDIATION TECHNOLOGY DEMONSTRATIONS

EPA Science Inventory

Hazardous waste site remediation workers or neighboring residents may be exposed to particulates during the remediation of lead contaminated soil sites. An industrial hygiene survey and air monitoring program for both lead and dust were performed during initial soil sampling acti...

SUPERFUND TREATABILITY CLEARINGHOUSE: BDAT FOR SOLIDIFICATION/STABILIZATION TECHNOLOGY FOR SUPERFUND SOILS (DRAFT FINAL REPORT)

EPA Science Inventory

This report evaluates the performance of solidification as a method for treating solids from Superfund sites. Tests were conducted on four different artificially contaminated soils which are representative of soils found at the sites. Contaminated soils were solidified us...

Evaluation Strategy. Paper Preservation Systems.

ERIC Educational Resources Information Center

FMC Corp., Gastonia, NC. Lithium Div.

After a decade of slow but steady progress, the pace of development of technologies to deacidify and strengthen deteriorating books and documents has quickened significantly. These developments accentuate the need for the conservation community to scientifically evaluate the technical merits of potential processes. This draft evaluation strategy…

Connected Vehicle Pilot Deployment Program phase 1 : partnership status summary : ICF/Wyoming : draft report.

DOT National Transportation Integrated Search

2016-08-12

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

Office of Biological and Physical Research: Overview Transitioning to the Vision for Space Exploration

NASA Technical Reports Server (NTRS)

Crouch, Roger

2004-01-01

Viewgraphs on NASA's transition to its vision for space exploration is presented. The topics include: 1) Strategic Directives Guiding the Human Support Technology Program; 2) Progressive Capabilities; 3) A Journey to Inspire, Innovate, and Discover; 4) Risk Mitigation Status Technology Readiness Level (TRL) and Countermeasures Readiness Level (CRL); 5) Biological And Physical Research Enterprise Aligning With The Vision For U.S. Space Exploration; 6) Critical Path Roadmap Reference Missions; 7) Rating Risks; 8) Current Critical Path Roadmap (Draft) Rating Risks: Human Health; 9) Current Critical Path Roadmap (Draft) Rating Risks: System Performance/Efficiency; 10) Biological And Physical Research Enterprise Efforts to Align With Vision For U.S. Space Exploration; 11) Aligning with the Vision: Exploration Research Areas of Emphasis; 12) Code U Efforts To Align With The Vision For U.S. Space Exploration; 13) Types of Critical Path Roadmap Risks; and 14) ISS Human Support Systems Research, Development, and Demonstration. A summary discussing the vision for U.S. space exploration is also provided.

Ethical considerations of research policy for personal genome analysis: the approach of the Genome Science Project in Japan.

PubMed

Minari, Jusaku; Shirai, Tetsuya; Kato, Kazuto

2014-12-01

As evidenced by high-throughput sequencers, genomic technologies have recently undergone radical advances. These technologies enable comprehensive sequencing of personal genomes considerably more efficiently and less expensively than heretofore. These developments present a challenge to the conventional framework of biomedical ethics; under these changing circumstances, each research project has to develop a pragmatic research policy. Based on the experience with a new large-scale project-the Genome Science Project-this article presents a novel approach to conducting a specific policy for personal genome research in the Japanese context. In creating an original informed-consent form template for the project, we present a two-tiered process: making the draft of the template following an analysis of national and international policies; refining the draft template in conjunction with genome project researchers for practical application. Through practical use of the template, we have gained valuable experience in addressing challenges in the ethical review process, such as the importance of sharing details of the latest developments in genomics with members of research ethics committees. We discuss certain limitations of the conventional concept of informed consent and its governance system and suggest the potential of an alternative process using information technology.

Draft Site Treatment Plan (DSTP), Volumes I and II

DOE Office of Scientific and Technical Information (OSTI.GOV)

D`Amelio, J.

1994-08-30

Site Treatment Plans (STP) are required for facilities at which the DOE generates or stores mixed waste. This Draft Site Treatment Plan (DSTP) the second step in a three-phase process, identifies the currently preferred options for treating mixed waste at the Savannah River Site (SRS) or for developing treatment technologies where technologies do not exist or need modification. The DSTP reflects site-specific preferred options, developed with the state`s input and based on existing available information. To the extent possible, the DSTP identifies specific treatment facilities for treating the mixed waste and proposes schedules. Where the selection of specific treatment facilitiesmore » is not possible, schedules for alternative activities such as waste characterization and technology assessment are provided. All schedule and cost information presented is preliminary and is subject to change. The DSTP is comprised of two volumes: this Compliance Plan Volume and the Background Volume. This Compliance Plan Volume proposes overall schedules with target dates for achieving compliance with the land disposal restrictions (LDR) of RCRA and procedures for converting the target dates into milestones to be enforced under the Order. The more detailed discussion of the options contained in the Background Volume is provided for informational purposes only.« less

Human genetics and genomics a decade after the release of the draft sequence of the human genome.

PubMed

Naidoo, Nasheen; Pawitan, Yudi; Soong, Richie; Cooper, David N; Ku, Chee-Seng

2011-10-01

Substantial progress has been made in human genetics and genomics research over the past ten years since the publication of the draft sequence of the human genome in 2001. Findings emanating directly from the Human Genome Project, together with those from follow-on studies, have had an enormous impact on our understanding of the architecture and function of the human genome. Major developments have been made in cataloguing genetic variation, the International HapMap Project, and with respect to advances in genotyping technologies. These developments are vital for the emergence of genome-wide association studies in the investigation of complex diseases and traits. In parallel, the advent of high-throughput sequencing technologies has ushered in the 'personal genome sequencing' era for both normal and cancer genomes, and made possible large-scale genome sequencing studies such as the 1000 Genomes Project and the International Cancer Genome Consortium. The high-throughput sequencing and sequence-capture technologies are also providing new opportunities to study Mendelian disorders through exome sequencing and whole-genome sequencing. This paper reviews these major developments in human genetics and genomics over the past decade.

Human genetics and genomics a decade after the release of the draft sequence of the human genome

PubMed Central

2011-01-01

Substantial progress has been made in human genetics and genomics research over the past ten years since the publication of the draft sequence of the human genome in 2001. Findings emanating directly from the Human Genome Project, together with those from follow-on studies, have had an enormous impact on our understanding of the architecture and function of the human genome. Major developments have been made in cataloguing genetic variation, the International HapMap Project, and with respect to advances in genotyping technologies. These developments are vital for the emergence of genome-wide association studies in the investigation of complex diseases and traits. In parallel, the advent of high-throughput sequencing technologies has ushered in the 'personal genome sequencing' era for both normal and cancer genomes, and made possible large-scale genome sequencing studies such as the 1000 Genomes Project and the International Cancer Genome Consortium. The high-throughput sequencing and sequence-capture technologies are also providing new opportunities to study Mendelian disorders through exome sequencing and whole-genome sequencing. This paper reviews these major developments in human genetics and genomics over the past decade. PMID:22155605

Efficacy of a new educational tool to improve Handrubbing technique amongst healthcare workers: a controlled, before-after study.

PubMed

Stewardson, Andrew J; Iten, Anne; Camus, Véronique; Gayet-Ageron, Angèle; Caulfield, Darren; Lacey, Gerard; Pittet, Didier

2014-01-01

Hand hygiene is a key component of infection control in healthcare. WHO recommends that healthcare workers perform six specific poses during each hand hygiene action. SureWash (Glanta Ltd, Dublin, Ireland) is a novel device that uses video-measurement technology and immediate feedback to teach this technique. We assessed the impact of self-directed SureWash use on healthcare worker hand hygiene technique and evaluated the device's diagnostic capacity. A controlled before-after study: subjects in Group A were exposed to the SureWash for four weeks followed by Group B for 12 weeks. Each subject's hand hygiene technique was assessed by blinded observers at baseline (T0) and following intervention periods (T1 and T2). Primary outcome was performance of a complete hand hygiene action, requiring all six poses during an action lasting ≥20 seconds. The number of poses per hand hygiene action (maximum 6) was assessed in a post-hoc analysis. SureWash's diagnostic capacity compared to human observers was assessed using ROC curve analysis. Thirty-four and 29 healthcare workers were recruited to groups A and B, respectively. No participants performed a complete action at baseline. At T1, one Group A participant and no Group B participants performed a complete action. At baseline, the median number of poses performed per action was 2.0 and 1.0 in Groups A and B, respectively (p = 0.12). At T1, the number of poses per action was greater in Group A (post-intervention) than Group B (control): median 3.8 and 2.0, respectively (p<0.001). In Group A, the number of poses performed twelve weeks post-intervention (median 3.0) remained higher than baseline (p<0.001). The area under the ROC curves for the 6 poses ranged from 0.59 to 0.88. While no impact on complete actions was demonstrated, SureWash significantly increased the number of poses per hand hygiene action and demonstrated good diagnostic capacity.

[The experience of involvement of volunteers into maintenance of infection safety during period of implementation of mass activities].

PubMed

Imamov, A A; Balabanova, L A; Zamalieva, M A

2016-01-01

The article presents experience of Rospotrebnadzor in the Republic of Tatarstan in the field of preventive medicine concerning training of volunteers on issues of infection safety with purpose of prevention of ictuses of infection diseases during mass activities with international participation in the period of XXVII World Summer Students Games. The model of hygienic training for volunteers provides two directions: training for volunteers ’ leaders on issues of infection safety and remote course for involved volunteers. During period of preparation for the Students Games-2013 hygienic training was organized for volunteers-leaders in the field of infection safety with following attestation. The modern training technologies were applied. The volunteers-leaders familiarized with groups of infection diseases including the most dangerous ones, investigated with expert algorithm of actions to be applied in case of suspicion on infection disease in gest or participant of the Games-2013 to secure one's health and health of immediate population. The active volunteers-leaders became trainers and coaches in the field of infection safety. The second stage of infection safety training organized by youth trainers' pool in number of 30 individuals the training technology "Equal trains equal" was applied for hygienic training of volunteers involved at epidemiologically significant objects (food objects, hotels, accompaniment of guests and sportsmen). The volunteers-leaders trained to infection safety 1400 volunteers. The format of electronic personal cabinet and remote course were selected as tools of post-training monitoring.

Millennial Dental Hygiene Students' Learning Preferences Compared to Non-Millennial Faculty Members' Teaching Methods: A National Study.

PubMed

Turner, April M; Prihoda, Thomas J; English, Dana K; Chismark, Aubreé; Jacks, Mary E

2016-09-01

The aim of this study was to compare the learning preferences of millennial dental hygiene students (born between 1982 and 2002) in the U.S. with the teaching methods used by their non-millennial instructors. Cross-sectional surveys were developed with 21-item, five-point Likert scales to examine students' preferences for and faculty use of lecture, collaborative activities, technology, independent work, and group discussion. Surveys were emailed to U.S. dental hygiene program directors in September 2015. The respondents totaled 800 students and 343 faculty members-approximately 5% of all dental hygiene students and 6.8% of all dental hygiene faculty members in the U.S. The results showed that the responding faculty members (88.7%) used case studies more than the students (61.2%) preferred and that the students (71.4%) preferred games when learning more than the faculty members (57.2%) used them (p<0.0001). Student respondents (82.1%) preferred handouts for lecture more than did the faculty respondents (58.8%; p<0.0001). Faculty respondents expected students to read before class 39.3% more than student respondents read (p<0.0001). Student respondents preferred study guides for exams 39.2% more than the faculty respondents provided them (p<0.0001). Participating faculty members (84.0%) had students work in groups more than these students preferred (57.8%), and 92% of these faculty members used group activities in class (p<0.0001). The responses of the millennial dental hygiene students in this study were consistent with previous research on millennial traits. This study found areas of disagreement between students and faculty members on the use of case studies, study guides, and group work. Although these students stated they preferred lecture over group work, trends in education stress using active learning over lecture.

Translations on USSR Science and Technology, Biomedical and Behavioral Sciences, Number 20

DTIC Science & Technology

1978-01-17

obesity due to excessive use of high-calory pro- ducts, poor organic conditioning under the conditions of hypodynamia, etc. The increased life tempo...of Soviet health education is connected with hygienic instruction and education of schoolchildren and students. The USSR Ministry of Health and the

ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT REMOVAL OF MERCURY FROM DENTAL OFFICE WASTEWATER

EPA Science Inventory

Verification testing of the DRNA Mercury Recovery Unit (MRU) was conducted during a seven-week period, at a dental office in Michigan that had three operatory rooms and two hygiene rooms. The office operated four days per week and averaged approximately eight (8) mercury amalgam ...

Partners of the Community.

ERIC Educational Resources Information Center

Reese, Susan

2002-01-01

Oklahoma has a long tradition of partnering with the community and its career-tech system is viewed as the economic development arm of the Oklahoma Public School system. A partnership between the Tri County Technology Center and University of Oklahoma, for example, involves dental hygiene students in providing oral health care for poor rural…

OSD CALS Architecture Master Plan Study. Data Dictionary. Concept Paper. Draft Version 1.2. Volume 29

DOT National Transportation Integrated Search

1989-10-01

Rapid advances in information technology are changing the way technical data is created, stored, and used. These advances have created opportunities to reduce costs and improve productivity in both the administration of data and in the acquisition an...

Connected Vehicle Pilot Deployment Concept phase 1 : comprehensive Pilot Deployment Plan : ICF Wyoming : draft final report.

DOT National Transportation Integrated Search

2016-08-11

The Wyoming Department of Transportations (WYDOT) Connected Vehicle (CV) Pilot Deployment Program is intended to develop a suite of applications that utilize vehicle to infrastructure (V2I) and vehicle to vehicle (V2V) communication technology to ...

LED street lighting evaluation -- phase II : LED specification and life-cycle cost analysis.

DOT National Transportation Integrated Search

2015-01-01

Phase II of this study focused on developing a draft specification for LED luminaires to be used by IDOT : and a life-cycle cost analysis (LCCA) tool for solid state lighting technologies. The team also researched the : latest developments related to...

An Rx for 20/20 Vision: Vision Planning and Education.

ERIC Educational Resources Information Center

Chrisman, Gerald J.; Holliday, Clifford R.

1996-01-01

Discusses the Dallas Independent School District's decision to adopt an integrated technology infrastructure and the importance of vision planning for long term goals. Outlines the vision planning process: first draft; environmental projection; restatement of vision in terms of market projections, anticipated customer needs, suspected competitor…

Java: An Explosion on the Internet.

ERIC Educational Resources Information Center

Read, Tim; Hall, Hazel

Summer 1995 saw the release, with considerable media attention, of draft versions of Sun Microsystems' Java computer programming language and the HotJava browser. Java has been heralded as the latest "killer" technology in the Internet explosion. Sun Microsystems and numerous companies including Microsoft, IBM, and Netscape have agreed…

Use of Technology Solutions to Improve CAD Instruction

ERIC Educational Resources Information Center

Ault, Holly K.; Fraser, Alister

2012-01-01

Engineering Graphics curricula have changed dramatically in the past three decades. In the past, students in nearly all engineering disciplines were instructed in manual drafting and descriptive geometry. Students spent many hours "on the board", and this training enhanced the students' graphics communication, design and visualization…

Therapy and treatment with a high-energy laser in case of a periodontal disease treatment instead of physiotherapy or low-level laser treatment

NASA Astrophysics Data System (ADS)

Buerger, Friedhelm R.

1996-12-01

Since intensive efforts ofprophylaxis including fluoridisation, better oral hygiene, eating ofless sugar containing foods, reduced the risk ofcaries and the problems ofcaries lesions significantly. But, especially beginning at the age of3O years more than 80 % ofthe population in almost every nation shows signs of periodontal defects. This you can call an epidemic disease. Because people get older and expect a lot concerning their outlook, their esthetic, their phonetic, they have great expectations towards their natural dentition and keep their own teeth. This is a great challenge to periodontal prophylaxis and periodontal therapy. According to the progress ofthe disease different therapies are indicated. Starting with oral hygiene instructions to establish better oral hygiene with all the modem technologies ofmicrobiological investigations, pharmaceutical therapy, physiotherapy, low level laser treatment, periodontal-surgery, like curettage, deepscaling and rootplaning but also more sophisticated teatmentplans with gingivoplasty, gingivectomy, flap-procedures and mucogingival surgeiy including bone fillings, regenerativ technics the whole spectrum oftreatment options has widely expanded during the last years.

Application of the industrial hygiene hierarchy of controls to prioritize and promote safer methods of pest control: a case study.

PubMed

Weinberg, Justine Lew; Bunin, Lisa J; Das, Rupali

2009-01-01

In 2005, the California Department of Public Health, Occupational Health Branch (OHB) investigated an incident of pesticide exposure and identified 27 vineyard workers who became ill due to drift of cyfluthrin, a pesticide being applied to a neighboring orange field to control katydids. Another pest, citrus thrips, was also present in the field. We investigated safer alternatives for katydid and thrips control to prevent illness due to pesticide exposure and used the industrial hygiene hierarchy of controls to prioritize the control methods. OHB evaluated factors that contributed to pesticide exposure and identified safer alternatives by conducting literature reviews on katydid and thrips control, drift prevention technology, and other relevant topics, and by interviewing integrated pest management advisors, conventional and organic growers, equipment manufacturers, county agricultural commissioners, pest control advisors, regulatory agencies, and others. We prioritized methods using the industrial hygiene hierarchy of controls. We identified safer pest control practices that incorporated hazard elimination, chemical substitution, engineering controls, and administrative controls, including employer policies and government regulations.

Computer Graphics.

ERIC Educational Resources Information Center

Halpern, Jeanne W.

1970-01-01

Computer graphics have been called the most exciting development in computer technology. At the University of Michigan, three kinds of graphics output equipment are now being used: symbolic printers, line plotters or drafting devices, and cathode-ray tubes (CRT). Six examples are given that demonstrate the range of graphics use at the University.…

77 FR 65190 - National Committee on Vital and Health Statistics: Meeting

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-25

... Office of the National Coordinator for Health Information Technology (ONC), and the Office for Civil Rights (OCR). The Committee will also discuss its draft report on Data Stewardship in Community Health... DEPARTMENT OF HEALTH AND HUMAN SERVICES National Committee on Vital and Health Statistics: Meeting...

INDEPENDENT POWER PLANT USING WOOD WASTE

EPA Science Inventory

A 1 MWe power plant using waste wood is to be installed at a U.S. Marine Corps base, which will supply all the wood for the plant from a landfill site. The core energy conversion technology is a down-draft gasifier supplying approximately 150 Btu/scf gas to both spark ignition an...

76 FR 43374 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-20

...'s design and content, using an iterative process to improve the draft form to make it easier for... considered private. Type of Review: New Collection. Affected Public: Individuals and businesses or other for... other forms of information technology; and (e) estimates of capital or start-up costs and costs of...

78 FR 14804 - Agency Information Collection Activities; Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-07

... the data collection plans and draft instruments, email [email protected] or call the HRSA Reports...; (c) workforce recruitment and retention; (d) sustainability; (e) health information technology; (f... ADDRESSES: Submit your comments to [email protected] or mail the HRSA Reports Clearance Officer, Room 10-29...

76 FR 24924 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... use of automated collection techniques or other forms of information technology? The public may examine and have copied for a fee publicly available documents, including the draft supporting statement, at the NRC's Public Document Room, O1-F21, One White Flint North, 11555 Rockville Pike, Rockville...

76 FR 7817 - Announcing Draft Federal Information Processing Standard 180-4, Secure Hash Standard, and Request...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... before May 12, 2011. ADDRESSES: Written comments may be sent to: Chief, Computer Security Division... FURTHER INFORMATION CONTACT: Elaine Barker, Computer Security Division, National Institute of Standards... Quynh Dang, Computer Security Division, National Institute of Standards and Technology, Gaithersburg, MD...

77 FR 2514 - National Ocean Council-National Ocean Policy Draft Implementation Plan

Federal Register 2010, 2011, 2012, 2013, 2014

2012-01-18

... for users, more efficient and coordinated decision-making, and improved sharing of data and technology... the preparation of the final plan. We welcome your general input, and also pose the following...: Strengthen and integrate Federal and non-Federal ocean observing systems, sensors, data collection platforms...

Models For Assessing The Impacts And The Potential Benefits Of Intelligent Transportation Systems, A Working Paper, Draft

DOT National Transportation Integrated Search

1995-08-15

THE ABSENCE OF SYSTEMATIC ANALYSIS OF THE SOCIETAL BENEFITS AND COSTS OF INTELLIGENT TRANSPORTATION SYSTEMS (ITS) TECHNOLOGIES -- IN THE SHORT-TERM AS WELL AS LONG TERM -- IS WELL RECOGNIZED IN THE ITS COMMUNITY. THIS UNMET NEED HAS BEEN RECOGNIZED, ...

An analysis of student performance benchmarks in dental hygiene via distance education.

PubMed

Olmsted, Jodi L

2010-01-01

Three graduate programs, 35 undergraduate programs and 12 dental hygiene degree completion programs in the United States use varying forms of Distance Learning (DL). Relying heavily on DL leaves an unanswered question: Is learner performance on standard benchmark assessments impacted when using technology as a delivery system? A 10 year, longitudinal examination looked for student performance differences in a Distance Education (DE) dental hygiene program. The purpose of this research was to determine if there was a difference in performance between learners taught in a traditional classroom as compared to their counterparts taking classes through an alternative delivery system. A longitudinal, ex post facto design was used. Two hundred and sixty-six subject records were examined. Seventy-seven individuals (29%) were lost through attrition over 10 years. One hundred and eighty-nine records were used as the study sample, 117 individuals were located face-to-face and 72 were at a distance. Independent variables included time and location, while the dependent variables included course grades, grade point average (GPA) and the National Board of Dental Hygiene Examination (NBDHE). Three research questions were asked: Were there statistically significant differences in learner performance on the National Board of Dental Hygiene Examination (NBDHE)? Were there statistically significant differences in learner performance when considering GPAs? Did statistically significant differences in performance exist relating to individual course grades? T-tests were used for data analysis in answering the research questions. From a cumulative perspective, no statistically significant differences were apparent for the NBDHE and GPAs or for individual courses. Interactive Television (ITV), the synchronous DL system examined, was considered effective for delivering education to learners if similar performance outcomes were the evaluation criteria.

Walk-through survey report: Control technology for integrated circuit fabrication, Xerox Corporation, El Segundo, California

NASA Astrophysics Data System (ADS)

Mihlan, G. J.; Ungers, L. J.; Smith, R. K.; Mitchell, R. I.; Jones, J. H.

1983-05-01

A preliminary control technology assessment survey was conducted at the facility which manufactures N-channel metal oxide semiconductor (NMOS) integrated circuits. The facility has industrial hygiene review procedures for evaluating all new and existing process equipment. Employees are trained in safety, use of personal protective equipment, and emergency response. Workers potentially exposed to arsenic are monitored for urinary arsenic levels. The facility should be considered a candidate for detailed study based on the diversity of process operations encountered and the use of state-of-the-art technology and process equipment.

Draft genome sequence of Enterobacter cloacae HBY, a ST128 clinical strain co-producing KPC-2 and NDM-1 carbapenemases.

PubMed

Li, Xi; Zhu, Yongze; Shen, Mengyuan; Du, Jing; Zhang, Lei; Wang, Dairong

2018-03-01

Enterobacter cloacae is one of the major pathogens responsible for a variety of human infections. Here we report the draft genome sequence of multidrug-resistant E. cloacae strain HBY isolated from a female patient in China. Whole genomic DNA of E. cloacae strain HBY was extracted and was sequenced using an Illumina HiSeq™ 2000 platform. The generated sequence reads were assembled using CLC Genomics Workbench. The draft genome was annotated using Rapid Annotations using Subsystems Technology (RAST), and the presence of antimicrobial resistance genes was identified. The 5799439-bp genome contains various antimicrobial resistance genes conferring resistance to aminoglycosides, β-lactams, fosfomycin, macrolides, sulphonamides and fluoroquinolones. Notably, the strain was identified to carry two main carbapenemase genes (bla KPC-2 and bla NDM-1 ). The genome sequence reported in this study will provide valuable information to understand antibiotic resistance mechanisms in this strain. It is important to monitor the spread strains of Enterobacter sp. encoding both of these carbapenemase genes. Copyright © 2017 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

Draft standard for color AMLCDs in U.S. military aircraft

NASA Astrophysics Data System (ADS)

Hopper, Darrel G.; Dolezal, William K.; Schur, Keith; Liccione, John W.

1994-06-01

Flight instruments have begun to use color active liquid crystal displays (AMLCDs), signaling the beginning of a significant transition from electromechanical and cathode ray tube display designs to AMLCD designs. We have the opportunity with this new technology to establish common products capable of meeting user requirements for sunlight-readable, color and gray scale-capable, high-pixel-count, flat-panel displays for weapon systems. The Wright Laboratory is leading the development of standard and specification documentation for this new generation of display modules based on requirements for U.S. military aircraft. These requirements are similar in many ways to those of both the civil aviation and automotive industries. Accordingly, commonality with these applications is incorporated, where possible, along with the requirements for all military combat applications. Industry and government organizations are involved in this process through workshops and draft review processes. Military procurement specifications for combat system applications may use this information as a source of recommended best practice for this new generation of digital flat panel displays. The draft standard will be revised based upon continuing feedback by early 1995.

Technology: New Ways for Clean Water

ERIC Educational Resources Information Center

Roberts, Amanda S.

2012-01-01

Water purification promotes healthy living. While the developing world is working to provide its citizens with future access to clean water sources, the demand for that water is a pressing need today. It should be understood that drinking water, sanitation, and hygiene are interwoven and are all necessary for the overall improved standard of…

Impact of Community College of Philadelphia Allied Health Programs on the Philadelphia Region. Report #117.

ERIC Educational Resources Information Center

Philadelphia Community Coll., PA.

This report discusses the Allied Health programs at Community College of Philadelphia (CCP): (1) Clinical Laboratory Technician; (2) Dental Assisting Hygiene; (3) Dental Assisting Certificate; (4) Diagnostic Medical Imaging; (5) Dietetic Technician; (6) Health Information Technology; (7) Medical Assisting and Office Management; (8) Nursing; and…

Recruiting Talent: Indiana University-Purdue University Indianapolis Graduates the First Participants in its Research Scholars Program.

ERIC Educational Resources Information Center

Lords, Erik

2001-01-01

Describes the Minority Research Scholars Program (MRSP) at Indiana University-Purdue University Indianapolis, which funds the education of a group of minority students in seven disciplines: science, engineering and technology, social work, nursing, dental hygiene, physical education, and allied health. The program includes research projects,…

Manpower Status of Selected Health Professions for the State of Alabama.

ERIC Educational Resources Information Center

Drake, Albert E.

The purpose of this study is to provide information on the number and racial composition of students and workers in selected health care professions in the State of Alabama, and to analyze these data. Professions covered include dentistry, dental hygiene, nursing, medicine, medical technology, and occupational therapy. A description of how data…

[Issues of occupational health in scientific works of Aleksey N. Sysin (to the 85th anniversary of the "A.N. Sysin Research Institute of Human Ecology and Environmental Health")].

PubMed

Shigan, E F

Research priorities of Alexei Nikolaevich Sysin (1879-1956) were faced to the study of issues of sanitary and epidemiological welfare of Russia. World- renowned hygienist scientist was the one of the pioneers in the field of general and communal hygiene, epidemiology and disinfection. Not little attention A.N. Sysin paid also to issues of occupational health, together with other scientists he laid the foundation of modern Occupational Health. The victory of the Great October Revolution has set before organizers and medical science scholars, among who was A.N. Sysin, new challenges in dealing with the many complex issues, including occupational health issues. Already in the first months of the new Republic he prepared dozens of directives, regulations and instructions, wrote a large number of draft laws for health services, developed the first regulations on the sanitary supervision of the country enterprises. The leading role in the emergence of many printed newspapers and magazines, books and bulletins on general issues in health, preventive medicine, hygiene, epidemiology, occupational health is belonged to A.N. Sysin. He published more than 250 scientific papers on various aspects of sanitary science: from the problems of epidemics of dangerous infections to the working and living conditions of different enterprises. A. N. Sysin paid a lot of attention to industrial injuries, problems of increscent occupational toxicology, the introduction of newest forms of general and personal protective equipment at the plant, modernization of the industrial equipment, issues of the shortened workday, labor of women and children - all kinds of sanitary measures and improvement of labor and living workers' conditions.

Refining a taxonomy for guideline implementation: results of an exercise in abstract classification

PubMed Central

2013-01-01

Background To better understand the efficacy of various implementation strategies, improved methods for describing and classifying the nature of these strategies are urgently required. The aim of this study was to develop and pilot the feasibility of a taxonomy to classify the nature and content of implementation strategies. Methods A draft implementation taxonomy was developed based on the Cochrane Effective Practice and Organisation of Care (EPOC) data collection checklist. The draft taxonomy had four domains (professional, financial, organisational and regulatory) covering 49 distinct strategies. We piloted the draft taxonomy by using it to classify the implementation strategies described in the conference abstracts of the implementation stream of the 2010 Guideline International Network Conference. Five authors classified the strategies in each abstract individually. Final categorisation was then carried out in a face-to-face consensus meeting involving three authors. Results The implementation strategies described in 71 conference abstracts were classified. Approximately 15.5% of abstracts utilised strategies that could not be categorised using the draft taxonomy. Of those strategies that could be categorised, the majority were professionally focused (57%). A total of 41% of projects used only one implementation strategy, with 29% using two and 31% three or more. The three most commonly used strategies were changes in quality assurance, quality improvement and/or performance measurement systems, changes in information and communication technology, and distribution of guideline materials (via hard-copy, audio-visual and/or electronic means). Conclusions Further refinement of the draft taxonomy is required to provide hierarchical dimensions and granularity, particularly in the areas of patient-focused interventions, those concerned with audit and feedback and quality improvement, and electronic forms of implementation, including electronic decision support. PMID:23497520

Refining a taxonomy for guideline implementation: results of an exercise in abstract classification.

PubMed

Mazza, Danielle; Bairstow, Phillip; Buchan, Heather; Chakraborty, Samantha Paubrey; Van Hecke, Oliver; Grech, Cathy; Kunnamo, Ilkka

2013-03-15

To better understand the efficacy of various implementation strategies, improved methods for describing and classifying the nature of these strategies are urgently required. The aim of this study was to develop and pilot the feasibility of a taxonomy to classify the nature and content of implementation strategies. A draft implementation taxonomy was developed based on the Cochrane Effective Practice and Organisation of Care (EPOC) data collection checklist. The draft taxonomy had four domains (professional, financial, organisational and regulatory) covering 49 distinct strategies. We piloted the draft taxonomy by using it to classify the implementation strategies described in the conference abstracts of the implementation stream of the 2010 Guideline International Network Conference. Five authors classified the strategies in each abstract individually. Final categorisation was then carried out in a face-to-face consensus meeting involving three authors. The implementation strategies described in 71 conference abstracts were classified. Approximately 15.5% of abstracts utilised strategies that could not be categorised using the draft taxonomy. Of those strategies that could be categorised, the majority were professionally focused (57%). A total of 41% of projects used only one implementation strategy, with 29% using two and 31% three or more. The three most commonly used strategies were changes in quality assurance, quality improvement and/or performance measurement systems, changes in information and communication technology, and distribution of guideline materials (via hard-copy, audio-visual and/or electronic means). Further refinement of the draft taxonomy is required to provide hierarchical dimensions and granularity, particularly in the areas of patient-focused interventions, those concerned with audit and feedback and quality improvement, and electronic forms of implementation, including electronic decision support.

The NASA/DOE/DOD nuclear rocket propulsion project - FY 1991 status

NASA Technical Reports Server (NTRS)

Clark, John S.; Miller, Thomas J.

1991-01-01

NASA has initiated planning and critical technology development for nuclear rocket propulsion systems for Space Exploration Initiative missions to the moon and to Mars. Interagency agreements are being negotiated between NASA, the Department of Energy, and the Department of Defense for joint technology development activities. This paper summarizes the activities of the NASA project planning team in FY 1990 that led to the draft Nuclear Propulsion Project Plan, outlines the FY 1991 Interagency activities, and describes the current status of the project plan.

The Importance of Developing Communication Skills: Perceptions of Dental Hygiene Students.

PubMed

Walker, Kimberly K; Jackson, Richard D; Maxwell, Lisa

2016-10-01

Purpose: The purpose of this study was to gather data from first- and second-year dental hygiene students concerning their perceptions of the benefits and possible impediments to effective patient communication. Additionally, the students were asked to theorize as to the impact emerging communication technologies could have on oral health promotion, practice administration and patient/provider communication. Methods: A self-administered questionnaire of 6 open-ended queries was employed. Thematic analysis was conducted to reveal themes related to their perceived ability to effectively communicate, perceived barriers to communication, possible solutions to lessen or eliminate these barriers, and the impact of emerging technologies on interpersonal communication. Results: The questionnaire was completed by 63 of 68 students (93%). Patient apathy and patient unwillingness to change detrimental health-related habits were the most frequently cited barriers to effective communication. Of the students having patient contact, many stated that they were less sure of their ability to communicate effectively if the patient differed from themselves, such as being elderly or being from another culture. While most of the students believed their fundamental communication skills were good, many noted that improving their higher-order skills, such as conveying empathy or displaying a nonjudgmental attitude, were essential to being more effective communicators. Many students felt emerging technologies such as universal translators could potentially assist them in overcoming some of their perceived deficiencies. Conclusion: While perceived inadequacies will likely diminish as the students gain more experience in school and later in private practice, dental hygiene programs may wish to consider implementing additional structured educational experiences to better prepare students to address patient apathy and to effectively convey a sense of personal compassion. Promoting student involvement in community outreach activities and providing a variety of service learning opportunities, including foreign travel, may broaden student experiences and deepen their awareness and appreciation of verbal and nonverbal communications displayed by differing cultures. Copyright © 2016 The American Dental Hygienists’ Association.

[Methodological guideline for the efficacy and safety assessment of new pharmaceuticals: implementation of EUnetHTA's recommendations].

PubMed

Ubago Pérez, Ruth; Castillo Muñoz, María Auxiliadora; Banqueri, Mercedes Galván; García Estepa, Raúl; Alfaro Lara, Eva Rocío; Vega Coca, María Dolores; Beltrán Calvo, Carmen; Molina López, Teresa

The European network for Health Technology Assessment (EUnetHTA) is the network of public health technology assessment (HTA) agencies and entities from across the EU. In this context, the HTA Core Model ® , has been developed. The Andalusian Agency for Health Technology Assessment (AETSA) is a member of the Spanish HTA Network and EUnetHTA collaboration In addition, AETSA participates in the new EUnetHTA Joint Action 3 (JA, 2016-2019). Furthermore, AETSA works on pharmaceutical assessments. Part of this work involves drafting therapeutic positioning reports (TPRs) on drugs that have recently been granted marketing authorisation, which is overseen by the Spanish Agency of Medicines and Medical Devices (AEMPS). AETSA contributes by drafting "Evidence synthesis reports: pharmaceuticals" in which a rapid comparative efficacy and safety assessment is performed for drugs for which a TPR will be created. To create this type of report, AETSA follows its own methodological guideline based on EUnetHTA guidelines and the HTA Core Model ® . In this paper, the methodology that AETSA has developed to create the guideline for "Evidence synthesis reports: pharmaceuticals" is described. The structure of the report itself is also presented. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Spatial Visualization Ability and Impact of Drafting Models: A Quasi Experimental Study

ERIC Educational Resources Information Center

Katsioloudis, Petros J.; Jovanovic, Vukica

2014-01-01

A quasi experimental study was done to determine significant positive effects among three different types of visual models and to identify whether any individual type or combination contributed towards a positive increase of spatial visualization ability for students in engineering technology courses. In particular, the study compared the use of…

Exploiting long read sequencing technologies to establish high quality highly contiguous pig reference genome assemblies

USDA-ARS?s Scientific Manuscript database

The current pig reference genome sequence (Sscrofa10.2) was established using Sanger sequencing and following the clone-by-clone hierarchical shotgun sequencing approach used in the public human genome project. However, as sequence coverage was low (4-6x) the resulting assembly was only of draft qua...

Online Technologies for Teaching Writing: Students React to Teacher Response in Voice and Written Modalities

ERIC Educational Resources Information Center

Kim, Loel

2004-01-01

English departments are increasingly under pressure to offer writing courses online, but research that informs effective pedagogies--including effective ways to respond to students' drafts--is still limited. By investigating students' perceptions of online teacher response to student writing, this study suggests that in order to develop sound…

Technology Education: A Contemporary Perspective

ERIC Educational Resources Information Center

Litowitz, Len S.; Warner, Scott A.

2008-01-01

In the June 2007 issue of "Phi Delta Kappan" (EJ767455), James Howlett and Brad Huff authored an article about the strong relationship between basic skills in math and reading and such technical skills as machining, drafting, and working with electricity or electronics. They also suggested that, as a result of No Child Left Behind, the…

76 FR 67418 - Request for Comments on NIST Special Publication 500-293, US Government Cloud Computing...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-01

...-1659-01] Request for Comments on NIST Special Publication 500-293, US Government Cloud Computing... Publication 500-293, US Government Cloud Computing Technology Roadmap, Release 1.0 (Draft). This document is... (USG) agencies to accelerate their adoption of cloud computing. The roadmap has been developed through...

75 FR 19990 - Notice of Availability of the Draft Environmental Impact Statement for the NextLight Renewable...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-16

... to construct a solar photovoltaic (PV) plant facility approximately two miles southeast of Primm... action alternatives would use solar PV technology, although the specific types of arrays and trackers... Statement for the NextLight Renewable Power, LLC, Silver State Solar Project, Primm, NV AGENCY: Bureau of...

77 FR 40338 - Announcing Revised Draft Federal Information Processing Standard (FIPS) 201-2, Personal Identity...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-09

... may be sent to: Chief, Computer Security Division, Information Technology Laboratory, ATTN: Comments... introduces the concept of a virtual contact interface, over which all functionality of the PIV Card is... Laboratory Programs. [FR Doc. 2012-16725 Filed 7-6-12; 8:45 am] BILLING CODE 3510-13-P ...

Structural Science Laboratory Supplement. High-Technology Training Module.

ERIC Educational Resources Information Center

Luthens, Roger

This module, a laboratory supplement on the theory of bending and properties of sections, is part of a first-year, postsecondary structural science technical support course for architectural drafting and design. The first part of this two-part supplement is directed at the instructor and includes the following sections: program objectives; course…

Chromosome-scale scaffolding of the black raspberry (Rubus occidentalis L.) genome based on chromatin interaction data

USDA-ARS?s Scientific Manuscript database

Black raspberry (Rubus occidentalis L.) is a niche fruit crop valued for its flavour and potential health benefits. The improvement of fruit and cane characteristics via molecular breeding technologies has been hindered by the lack of a high-quality reference genome. The recently released draft geno...

Cost-Cutting in Higher Education: Lessons Learned from Collaboration, Technology, and Outsourcing Initiatives. Draft.

ERIC Educational Resources Information Center

Kaganoff, Tessa

This document presents a review of cost-containment initiatives relevant to higher education institutions. Originally commissioned to examine cost containment initiatives carried out by institutions affiliated with the Foundation for Independent Higher Education (FIHE), the paper was expanded to include a sector-wide review of three types of…

75 FR 48731 - Notice of Availability for Public Comment on the Draft Joint Subcommittee on Ocean Science and...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-11

..., the academic community and the private sector in providing IOOS environmental information, products... Subcommittee on Ocean Science and Technology--Interagency Ocean Observation Committee Public-Private Use Policy... a 60-day public comment period for the Public-Private Use Policy mandated by the Integrated Coastal...

Customized On-site Resource Training Services (CORTS): A Partnership Program.

ERIC Educational Resources Information Center

Macquarie Univ., North Ryde (Australia). Special Education Centre.

In 1983, New Brunswick Community College-Moncton (NBCCM) was awarded funding to establish a Computer Aided Drafting/Manufacturing (CAD/CAM) resource center to train students and assist industry in researching and adopting CAD/CAM technology. However, inherent constraints in industry and the absorption of college resources by in-house training…

77 FR 27055 - National and Governmental Advisory Committees to the U.S. Representative to the Commission for...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-08

... authorized under Articles 17 and 18 of the North American Agreement on Environmental Cooperation (NAAEC... strategic, scientific, technological, regulatory, and economic issues related to implementation and further... addressing the draft Guidelines for Submissions on Enforcement Matters under Articles 14 and 15 of the NAAEC...

78 FR 59980 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-30

... action to submit an information collection request to the Office of Management and Budget (OMB) and... information technology? The public may examine and have copied for a fee publicly available documents, including the draft supporting statement, at the NRC's Public Document Room, Room O-1F21, One White Flint...

Storytelling, Technology and Children's Literacy Development.

ERIC Educational Resources Information Center

Amaro, Ana Carla; Moreira, Antonio

This paper reports on a project started November 1999, which aims at understanding the storytelling structuring processes put into action by children at primary education level. The ultimate goal of this study is to draft a script for a computer tool to support story telling. For this purpose it identifies narrative scheme as the main organizing…

Computer Programs for Technical Communicators: The Compelling Curriculum. Working Draft.

ERIC Educational Resources Information Center

Selfe, Cynthia L.; Wahlstrom, Billie J.

A series of computer programs have been developed at Michigan Technological University for use with technical writing and technical communications classes. The first type of program in the series, CURIE II, includes process-based modules, each of which corresponds to one of the following assignments: memoranda, resumes, feasibility reports,…

A Plan to the Future in Home Economics Education. Draft Curriculum.

ERIC Educational Resources Information Center

Ruckes, Nina Tiglio; Mongillo, Michael

This curriculum guide was prepared to help Connecticut high schools offer an opportunity to disadvantaged high school students who are interested in home economics education to earn some college credit toward a degree in dietetic technology. The curriculum guide includes an overview of the course with a course description, recommended textbooks,…

Polymorphic SSR markers for Plasmopara obducens (Peronosporaceae), the newly emergent downy mildew pathogen of Impatiens (Balsaminaceae)

USDA-ARS?s Scientific Manuscript database

Premise of the study: Microsatellite markers were developed for Plasmopara obducens, the causal agent of the newly emergent downy mildew disease of Impatiens walleriana. Methods and Results: A 151.2 Mb draft genome assembly was generated from P. obducens using Illumina technology and mined to identi...

75 FR 39535 - Agency Information Collection Activities: Proposed Collection: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-09

... opportunity for public comment on proposed data collection projects (section 3506(c)(2)(A) of Title 44, United... more information on the proposed project or to obtain a copy of the data collection plans and draft... forms of information technology. Proposed Project: Bureau of Primary Health Care (BPHC) Uniform Data...

Drafting 101, 201, 301. Industrial Arts.

ERIC Educational Resources Information Center

Manitoba Dept. of Education, Winnipeg. Div. of Vocational Education.

This curriculum guide outlines three credits of study, one credit for each of the grade levels 10, 11, and 12. Intended as an optional study area, the program provides awareness and exploration for those students who aspire to postsecondary study and introduces skills to those who wish to explore trades and technologies in employment after school.…

77 FR 56817 - Notice of Public Hearings for the Draft Environmental Impact Statement for Medical Facilities...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-14

... buildings (Buildings 2, 4, 6, 7, and 8) and construction of a single 5-story replacement facility in the... clinics; incorporate evidence-based design; include expansion of technology; and allow for operational... regulation. 2. MFD--demolition of five hospital buildings, construction of a single 5-story replacement...

Occupationally Related Science. Draft Curriculum 1986-87.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Div. of Occupational Education Programs.

To prepare occupational students for employment, a basic understanding of scientific knowledge and the processes of science that have been applied in the development of tools, machines, instruments, and technological techniques or processes should be taught. When a second unit of science was included for all high school students in the New York…

The Transcriptomics of Secondary Growth and Wood Formation in Conifers

PubMed Central

Carvalho, Ana; Paiva, Jorge; Louzada, José; Lima-Brito, José

2013-01-01

In the last years, forestry scientists have adapted genomics and next-generation sequencing (NGS) technologies to the search for candidate genes related to the transcriptomics of secondary growth and wood formation in several tree species. Gymnosperms, in particular, the conifers, are ecologically and economically important, namely, for the production of wood and other forestry end products. Until very recently, no whole genome sequencing of a conifer genome was available. Due to the gradual improvement of the NGS technologies and inherent bioinformatics tools, two draft assemblies of the whole genomes sequence of Picea abies and Picea glauca arose in the current year. These draft genome assemblies will bring new insights about the structure, content, and evolution of the conifer genomes. Furthermore, new directions in the forestry, breeding and research of conifers will be discussed in the following. The identification of genes associated with the xylem transcriptome and the knowledge of their regulatory mechanisms will provide less time-consuming breeding cycles and a high accuracy for the selection of traits related to wood production and quality. PMID:24288610

AQUAPLEX An Environmentally Aware Model Lunar Settlement

NASA Astrophysics Data System (ADS)

Preble, Darel

2003-01-01

The construction and operation of a replica Lunar settlement (CELSS), can provide many lessons in in-situ resource utilization, telerobotic operation and reducing the hygiene water demanded by existing models of Lunar operation - a larger settlement may be operated with the same amount of precious water. Hypes and Hall and all other CELSS models found in the literature propose quantities of hygiene water far in excess of what would be needed in actual operation using simple, environmentally aware technologies. By using modern zero water toilets, low water showers, CO2 dry cleaning machines, energy efficient washing machines and other hardware, water use can be slashed. The Space Solar Power Workshop sees great opportunity to advance the prospects for Lunar settlement through involving the environmental community in this fun design exercise.

Teaching with technology: learning outcomes for a combined dental and dental hygiene online hybrid oral histology course.

PubMed

Gadbury-Amyot, Cynthia C; Singh, Amul H; Overman, Pamela R

2013-06-01

Among the challenges leaders in dental and allied dental education have faced in recent years is a shortage of well-qualified faculty members, especially in some specialty areas of dentistry. One proposed solution has been the use of technology. At the University of Missouri-Kansas City School of Dentistry, the departure of a faculty member who taught the highly specialized content in oral histology and embryology provided the opportunity to implement distance delivery of that course. The course is taught once a year to a combined group of dental and dental hygiene students. Previous to spring semester of 2009, the course was taught using traditional face-to-face, in-class lectures and multiple-choice examinations. During the spring semesters of 2009, 2010, and 2011, the course was taught using synchronous and asynchronous distance delivery technology. Outcomes for these courses (including course grades and performance on the National Board Dental Examination Part I) were compared to those from the 2006, 2007, and 2008 courses. Students participating in the online hybrid course were also given an author-designed survey, and the perceptions of the faculty member who made the transition from teaching the course in a traditional face-to-face format to teaching in an online hybrid format were solicited. Overall, student and faculty perceptions and student outcomes and course reviews have been positive. The results of this study can provide guidance to those seeking to use technology as one method of curricular delivery.

Mentor's hand hygiene practices influence student's hand hygiene rates.

PubMed

Snow, Michelle; White, George L; Alder, Stephen C; Stanford, Joseph B

2006-02-01

There were 3 objectives for this prospective quasiexperimental study. The first was to determine the effect of mentor's hand hygiene practices on student's hand hygiene rates during clinical rotations. The second was to assess the difference in hand hygiene rates for students with and without prior medical experience. The third was to assess the student's opinion and beliefs regarding hand hygiene. Sixty students enrolled in a certified nursing program were selected to participate in the study. Each study group was observed twice during the 30-day span. The first observational period was conducted on day 1 of clinical rotation. The second observational period was conducted on day 30 of clinical rotation. Students were observed for hand hygiene. Also assessed were medical experience, sex, gloving, age, and mentor's hand hygiene practices. After observational period 2, a brief questionnaire was given to students to determine their opinion and beliefs regarding hand hygiene. The questionnaire was divided into 5 sections: student's commitment to hand hygiene, their perception of hand hygiene inconvenience, the necessity of hand hygiene, the student's ability to perform hand hygiene, and their opinion on the frequency of medical staff's hand hygiene. The mentor's practice of hand hygiene was the strongest predictor of the student's rate of hand hygiene for both observational periods (P < .01). Furthermore, students without prior medical experience had a significant increase in hand hygiene rates when comparing observational period 1 to observational period 2 (P < .01). Glove usage was associated with increased hand hygiene rates by 50% during observational period 1 (P = .01) and 44% during observational period 2 (P < .01). Male students during observational period 1 practiced hand hygiene 30% less often than female students (P < .01); however, during observational period 2, there was no significant difference between hand hygiene rates for males and females (P = .82). Questionnaires were completed by 47 students, who reported a strong commitment to hand hygiene, belief in its necessity, and ability to perform hand hygiene (with scores in the high 90s on a 10 to 100 rating scale). Mentor's use of hand hygiene and glove usage was associated with increased hand hygiene among students. Even though students reported strongly positive attitudes toward hand hygiene, students had a low overall rate of hand hygiene.

The effect of community-based health education intervention on management of menstrual hygiene among rural Indian adolescent girls.

PubMed

Dongre, A R; Deshmukh, P R; Garg, B S

2007-01-01

To study the effect of a community-based health education intervention on awareness and behaviour change of rural adolescent girls regarding their management of menstrual hygiene. A participatory-action study was undertaken in Primary Health Centres in 23 villages in Anji, in the Wardha district of Maharashtra state. Study subjects were unmarried rural adolescent girls (12-19 years). We conducted a needs assessment for health messages with this target audience, using a triangulated research design of quantitative (survey) and qualitative (focus group discussions) methods. Program for Appropriate Technology for Health (PATH) guidelines were used to develop a pre-tested, handmade flip book containing needs-based key messages about the management of menstrual hygiene. The messages were delivered at monthly meetings of village-based groups of adolescent girls, called Kishori Panchayat. After 3 years, the effect of the messages was assessed using a combination of quantitative (survey) and qualitative (trend analysis) methods. After 3 years, significantly more adolescent girls (55%) were aware of menstruation before its initiation compared with baseline (35%). The practice of using ready-made pads increased significantly from 5% to 25% and reuse of cloth declined from 85% to 57%. The trend analysis showed that adolescent girls perceived a positive change in their behaviour and level of awareness. The present community health education intervention strategy could bring significant changes in the awareness and behaviour of rural adolescent girls regarding management of their menstrual hygiene.

Programmatic Research to Design and Develop Improved Instructional Technology for Handicapped Children. Final Report.

ERIC Educational Resources Information Center

Schiefelbusch, Richard L.; Lent, James R.

Presented is the final report for Project MORE (Mediated Operational Research for Education), a program to create a full-scale operational system for developing product prototypes (methods and materials packages) for teaching personal appearance and hygiene skills to the trainable mentally retarded child. Reviewed in part I is the history of the…

Great Careers in Two Years: The Associate Degree Option. High Skill and High Wage Jobs Available through Two-Year Programs.

ERIC Educational Resources Information Center

Phifer, Paul

This book explores high-skill and high-wage jobs available through two-year programs. It identifies 100 high-need occupational areas, and discusses "hot" programs and starting salaries for graduates of dental hygiene, manufacturing, process technology, telecommunications, physical therapy assisting, and registered nursing. Each career article…

Spot-checks to measure general hygiene practice.

PubMed

Sonego, Ina L; Mosler, Hans-Joachim

2016-01-01

A variety of hygiene behaviors are fundamental to the prevention of diarrhea. We used spot-checks in a survey of 761 households in Burundi to examine whether something we could call general hygiene practice is responsible for more specific hygiene behaviors, ranging from handwashing to sweeping the floor. Using structural equation modeling, we showed that clusters of hygiene behavior, such as primary caregivers' cleanliness and household cleanliness, explained the spot-check findings well. Within our model, general hygiene practice as overall concept explained the more specific clusters of hygiene behavior well. Furthermore, the higher general hygiene practice, the more likely children were to be categorized healthy (r = 0.46). General hygiene practice was correlated with commitment to hygiene (r = 0.52), indicating a strong association to psychosocial determinants. The results show that different hygiene behaviors co-occur regularly. Using spot-checks, the general hygiene practice of a household can be rated quickly and easily.

Application of the human needs conceptual model of dental hygiene to the role of the clinician : part II.

PubMed

Walsh, M M; Darby, M

1993-01-01

In summary, the theories of Maslow and of Yura and Walsh have been highlighted as background for understanding the human needs conceptual model of dental hygiene. In addition, 11 human needs have been identified and defined as being especially related to dental hygiene care, and a sample evaluation tool for their clinical assessment and a dental hygiene care plan have been presented. The four concepts of client, environment, health/oral health, and dental hygiene actions explained in terms of human need theory, and the 11 human needs related to dental hygiene care constitute the human needs conceptual model of dental hygiene. Within the framework of the human needs conceptual model of dental hygiene, the dental hygiene process is a systematic approach to dental hygiene care that involves assessment of the 11 human needs related to dental hygiene care; analysis of deficits in these needs; determination of the dental hygiene care plan based on identified deficits; implementation of dental hygiene interventions stated in the care plan; and evaluation of the effectiveness of dental hygiene interventions in achieving specific goals, including subsequent reassessment and revision of the dental hygiene care plan. This human needs conceptual model for dental hygiene provides a guide for comprehensive and humanistic client care. This model allows the dental hygienist to view each client (whether an individual or a group) holistically to prevent oral disease and to promote health and wellness. Dental hygiene theorists are encouraged to expand this model or to develop additional conceptual models based on dental hygiene's paradigm.

Inexpensive and Time-Efficient Hand Hygiene Interventions Increase Elementary School Children's Hand Hygiene Rates

ERIC Educational Resources Information Center

Snow, Michelle; White, George L.; Kim, Han S.

2008-01-01

Routine hand hygiene has been cited by the World Health Organization and the Centers for Disease Control and Prevention as a cost-effective and important hygiene measure in preventing the spread of infectious diseases. Several studies have explored children's hand hygiene habits, effects of scheduled hand hygiene, hand hygiene environmental…

Behavioural informatics for improving water hygiene practice based on IoT environment.

PubMed

Fu, Yang; Wu, Wenyan

2018-02-01

The development of Internet of Things (IoT) and latest Information and Communication Technologies (ICT) have changed the nature of healthcare monitoring and health behaviour intervention in many applications. Water hygiene and water conservation behaviour intervention as important influence factors to human health are gaining much attentions for improving sustained sanitation practice. Based on face-to-face delivery, typical behaviour intervention method is costly and hardly to provide all day access to personalised intervention guidance and feedbacks. In this study, we presented a behavioural information system and water use behaviour model using IoT platform. Using Expanded Theory of Planned Behaviour (ETPB) and adopted structure equation model, this study offers a solution for understanding the behaviour intervention mechanism and methodology for developing empirical model. A case study of behaviour intervention model is presented by utilising residential water conservation behaviour data collected in China. Results suggested that cultural differences have significant influences on the understanding of intervention drivers, promoting projects and increasing awareness, which could improve the behaviour intervention efficiency and further facilitate the improvement of water hygiene practice. The performance evaluation of water saving dimension is discussed as well in the paper. Copyright © 2017 Elsevier Inc. All rights reserved.

Sanitary conditions in the Austrohungarian war harbour Pola (Pula, Croatia) in 1916-17: foundation of the Hygienic Institute.

PubMed

Alebić-Juretić, Ana

2017-12-01

Since 1850 the town of Pola (today Pula, Croatia) underwent big changes and growth due to its transformation into the principal military port of Austrian-Hungarian Empire. Besides the Admiralty that governed the naval actions, the harbor was supported by different organizations needed for normal functioning of the harbor. One of this organizations was Naval Technical Committee (Marine Technisches Komitee), founded in 1874 with the purpose of solving the technical and technological issues related to the navy. The outbreak of World War I (WWI) posed new challenges for Europe. Thus, on February 29th 1916, the Hygienic Institute was founded in the harbor area and Dr. Karl Cafasso was appointed as the first director. The purpose of the Institute was to provide scientific and professional aid to the Head of the Medical Corps of the Ports' Board (Kriegs-Hafenkommando) in the field of epidemiology, microbiology, social medicine and hygiene, the main fields of public health even today. By the end of the war, the Institute ceased its activity, and similar was founded only in 1938, under Italian rule and has been developed to the present Institute of Public Health.

[Experience of the implementation of the method of the integral assessment of drinking water on indicators of chemical harmlessness in St. Petersburg].

PubMed

Mel'tser, A V; Erastova, N V; Kiselev, A V

2013-01-01

Providing population with quality drinking water--one of the priority tasks of the state policy aimed at maintaining the health of citizens. Hygienic rating of the drinking water quality envisages requirements to assurance its safety in the epidemiological and radiation relations, harmlessness of chemical composition and good organoleptic properties. There are numerous data proving the relationship between the chemical composition of drinking water and human health, and therefore the issue of taking a hygienically sound measures to improve the efficiency of water treatment has more and more priority. High water quality--the result of complex solution of tasks, including an integral approach to assessment of the quality of drinking water the use of hygienically sound decisions in the modernization of water treatment systems. The results of the integral assessment of drinking water on the properties of harmlessness have shown its actuality in the development and implementation of management decisions. The use of the spatial characteristics of integrated indices permits to visualize changes in the quality of drinking water in all stages of production and transportation from the position of health risks, evaluate the effectiveness of technological solutions and set priorities for investing.

Improving the energy efficiency of sparse linear system solvers on multicore and manycore systems.

PubMed

Anzt, H; Quintana-Ortí, E S

2014-06-28

While most recent breakthroughs in scientific research rely on complex simulations carried out in large-scale supercomputers, the power draft and energy spent for this purpose is increasingly becoming a limiting factor to this trend. In this paper, we provide an overview of the current status in energy-efficient scientific computing by reviewing different technologies used to monitor power draft as well as power- and energy-saving mechanisms available in commodity hardware. For the particular domain of sparse linear algebra, we analyse the energy efficiency of a broad collection of hardware architectures and investigate how algorithmic and implementation modifications can improve the energy performance of sparse linear system solvers, without negatively impacting their performance. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

Draft national health policy 2015: A critical appraisal.

PubMed

Ahmed, Faruque U

2016-01-01

Revising a health policy of any country is a periodic procedure dependent on the change of demographic profile, current health status of the population including epidemiological changes in disease prevalence pattern, and progress made under the earlier policies. Along with it, newer research revelation of the natural history of the existing and emerging health problems, availability of newer technology as well as changing sociopolitical commitment to improve the health status of the population are the driving forces in the change of policy. Draft National Health Policy (NHP) 2015 is an attempt for the same. A review of the draft has been undertaken. The chapter on introduction is crisp and clear. Situation analysis of the draft is sketchy and without any reference of sources. Shifting the health goal is without any basis, and the objectives defined for the policy change are incongruous with the introduction. A detailed description does not give a clear picture but rather confuses the reader as it talks of comprehensive universal health-care services to be provided with a holistic concept but maximum emphasis is made in the implementation of a national program. Private health-care services are an area to reckon but except for mere references on the involvement in private-public mode, nothing concrete is observed, especially in the primary care level. Involvement envisaged in the secondary and tertiary levels is nebulous. The implementation health insurance program as well as regulatory mechanISM with the existing is also not defined exclusively in the context of a newer health policy.

MBGD update 2015: microbial genome database for flexible ortholog analysis utilizing a diverse set of genomic data.

PubMed

Uchiyama, Ikuo; Mihara, Motohiro; Nishide, Hiroyo; Chiba, Hirokazu

2015-01-01

The microbial genome database for comparative analysis (MBGD) (available at http://mbgd.genome.ad.jp/) is a comprehensive ortholog database for flexible comparative analysis of microbial genomes, where the users are allowed to create an ortholog table among any specified set of organisms. Because of the rapid increase in microbial genome data owing to the next-generation sequencing technology, it becomes increasingly challenging to maintain high-quality orthology relationships while allowing the users to incorporate the latest genomic data available into an analysis. Because many of the recently accumulating genomic data are draft genome sequences for which some complete genome sequences of the same or closely related species are available, MBGD now stores draft genome data and allows the users to incorporate them into a user-specific ortholog database using the MyMBGD functionality. In this function, draft genome data are incorporated into an existing ortholog table created only from the complete genome data in an incremental manner to prevent low-quality draft data from affecting clustering results. In addition, to provide high-quality orthology relationships, the standard ortholog table containing all the representative genomes, which is first created by the rapid classification program DomClust, is now refined using DomRefine, a recently developed program for improving domain-level clustering using multiple sequence alignment information. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

[HYGIENE: STRUCTURE OF INNOVATIVE RESEARCH STUDIES IN RUSSIA (2000-2014)].

PubMed

Evdokimov, V I; Popov, V I; Rut, A N

2015-01-01

There was analyzed the array of 1548 dissertations on the scientific specialty 14.02.01 (former specification 14.00.07) "Hygiene". Over period of 2000-2014 to the Dissertation Committee in Russia there were annually submitted (103 ± 10) theses, which include (21 ± 3) doctoral dissertations and (83 ± 8) candidate dissertations. Doctoral dissertations accounted for 20,1%, dissertations in medicine--89.3%. There was established not only the decline in the number of theses in hygiene, but the reduction of their proportion in the total array of all medical and biological dissertations in Russia. The conjugacy of the trend curves of the total stream of dissertations in medicine and biology in Russia and in hygiene is considered to be not very high (r = 0.54). In the total structure of dissertation works on General Hygiene accounted for 22.7%, Community Hygiene--15.45%, Occupational Hygiene--19.6%, Children's and Adolescents' Hygiene--24.7%, Nutrition Hygiene--8.2%, Radiation Hygiene--2.3%, in Rural Hygiene--1.2%, Hospital Hygiene-- 3.4%, Military Hygiene--2.3% correspondingly. There is pointed the development gap between the research studies in hygiene and tendency in training of high class health care professionals' in Russia.

Effectiveness of a multimodal hand hygiene campaign and obstacles to success in Addis Ababa, Ethiopia.

PubMed

Schmitz, Karen; Kempker, Russell R; Tenna, Admasu; Stenehjem, Edward; Abebe, Engida; Tadesse, Lia; Jirru, Ermias Kacha; Blumberg, Henry M

2014-03-17

Hand hygiene is the cornerstone of infection control and reduces rates of healthcare associated infection. There are limited data evaluating hand hygiene adherence and hand hygiene campaign effect in resource-limited settings, especially in Sub-Saharan Africa. This study assessed the impact of implementing a World Health Organization (WHO)-recommended multimodal hand hygiene campaign at a hospital in Ethiopia. This study included a before-and-after assessment of health care worker (HCW) adherence with WHO hand hygiene guidelines. It was implemented in three phases: 1) baseline evaluation of hand hygiene adherence and hospital infrastructure; 2) intervention (distribution of commercial hand sanitizer and implementation of an abbreviated WHO-recommended multimodal hand hygiene campaign); and 3) post-intervention evaluation of HCW hand hygiene adherence. HCWs' perceptions of the campaign and hand sanitizer tolerability were assessed through a survey performed in the post-intervention period. At baseline, hand washing materials were infrequently available, with only 20% of sinks having hand-washing materials. There was a significant increase in hand hygiene adherence among HCWs following implementation of a WHO multimodal hand hygiene program. Adherence increased from 2.1% at baseline (21 hand hygiene actions/1000 opportunities for hand hygiene) to 12.7% (127 hand hygiene actions /1000 opportunities for hand hygiene) after the implementation of the hand hygiene campaign (OR = 6.8, 95% CI 4.2-10.9). Hand hygiene rates significantly increased among all HCW types except attending physicians. Independent predictors of HCW hand hygiene compliance included performing hand hygiene in the post-intervention period (aOR = 5.7, 95% CI 3.5-9.3), in the emergency department (aOR = 4.9, 95% CI 2.8-8.6), during patient care that did not involve Attending Physician Rounds (aOR = 2.4, 95% CI 1.2-4.5), and after patient contact (aOR = 2.1, 95% CI 1.4-3.3). In the perceptions survey, 64.0% of HCWs indicated preference for commercially manufactured hand sanitizer and 71.4% indicated their hand hygiene adherence would improve with commercial hand sanitizer. There was a significant increase in hand hygiene adherence among Ethiopian HCWs following the implementation of a WHO-recommended multimodal hand hygiene campaign. Dissatisfaction with the current WHO-formulation for hand sanitizer was identified as a barrier to hand hygiene adherence in our setting.

Northwest Manufacturing Initiative

DTIC Science & Technology

2012-03-27

crack growth and threshold stress corrosion cracking evaluation. Threshold stress corrosion cracking was done using the rising step load method with...Group Technology methods to establish manufacturing cells for production efficiency, to develop internal Lean Champions, and to implement rapid... different levels, advisory, core, etc. VI. Core steering committee composed of members that have a significant vested interest. Action Item: Draft

Genome Sequence of Pseudomonas aeruginosa Strain LCT-PA220, Which Was Selected after Space Flight by Using Biolog's Powerful Carbon Source Utilization Technology.

PubMed

Xu, Guogang; Hu, Juan; Fang, Xiangqun; Zhang, Xuelin; Wang, Junfeng; Guo, Yinghua; Li, Tianzhi; Chen, Zhenghong; Dai, Wenkui; Liu, Changting

2014-03-13

To explore the changes of Pseudomonas aeruginosa in space flight, we present the draft genome sequence of P. aeruginosa strain LCT-PA220, which originated from a P. aeruginosa strain, ATCC 27853, that traveled on the Shenzhou-VIII spacecraft.

National evaluation of the SafeTrip-21 initiative : California connected traveler test bed, draft evaluation report : networked traveler-transit/smart parking.

DOT National Transportation Integrated Search

2010-11-10

Through the U.S. Department of Transportations (USDOT) SafeTrip-21 initiative, the USDOT is testing a variety of technologies in a number of locations in California as well as along the I-95 corridor on the east coast. This document presents the e...

75 FR 82413 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... technology? A copy of the draft supporting statement may be viewed free of charge at the NRC Public Document... and search for Docket No. NRC-2010-0347. Mail comments to NRC Clearance Officer, Tremaine Donnell (T-5.... Nuclear Regulatory Commission, Washington, DC 20555-0001, by telephone at 301- 415-6258, or by e-mail to...

National evaluation of the SafeTrip-21 initiative : California Connected Traveler test bed, draft evaluation report: networked traveler--transit/smart parking.

DOT National Transportation Integrated Search

2010-12-10

Through the U.S. Department of Transportations (USDOT) SafeTrip-21 initiative, the USDOT is testing a variety of technologies in a number of locations in California as well as along the I-95 corridor on the east coast. This document presents the e...

Len Gen: The international lentil genome sequencing project

USDA-ARS?s Scientific Manuscript database

We have been sequencing CDC Redberry using NGS of paired-end and mate-pair libraries over a wide range of sizes and technologies. The most recent draft (v0.7) of approximately 150x coverage produced scaffolds covering over half the genome (2.7 Gb of the expected 4.3 Gb). Long reads from PacBio sequ...

Drafting a Customized Tech Plan: Throw out Yesterday's Creaky Model

ERIC Educational Resources Information Center

Solomon, Gwen

2004-01-01

Today, states and districts are zeroing in on standards-based learning and high stakes test scores--even benchmarking results in advance of the school year. Technology planning is--or should be--a key part of any such learning design. With careful planning for integration districts can be helped to more successfully address standards and, in…

76 FR 24924 - Agency Information Collection Activities: Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... technology? The public may examine and have copied for a fee publicly available documents, including the draft supporting statement, at the NRC's Public Document Room, Room O-1F21, One White Flint North, 11555...://www.nrc.gov/public-involve/doc-comment/omb/index.html . The document will be available on the NRC home...

77 FR 48131 - Draft Finding of No Significant Impact and Programmatic Environmental Assessment for the...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-13

... consumption of freshwater resources and returning water back to the same watershed so as not to deplete the groundwater and surface water resources of that region in quantity or quality; and (3) Reducing, reusing, and... and behavior as well as multiple possible projects and technologies to enhance resource efficiency...

Draft Final Risk Assessment Lime Settling Basins. Version 2.1

DTIC Science & Technology

1990-10-25

TABLE OF CON "S Section Page EXECUTIVE SUMMARY ...................................... v 1.0 INTRODUCTION ..................................... 1 - 1 1.1...BACKGROUND AND RATIONALE ........................ 1 - 1 1.2 SUMMARY OF APPROACH ............................. 1 -3 1.3 REPORT FORMAT... 1 -4 2.0 SITE DESCRIPTION AND HISTORY ......................... 2- 1 3.0 PREFERRED ALTERNATIVE INTERIM ACTION TECHNOLOGY ..... 3- 1 4.0

77 FR 51067 - Investigations Regarding Eligibility To Apply for Worker Adjustment Assistance

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-23

.... Brockport, PA...... 08/06/12 08/03/12 (Union). 81863 Industrial Machine & Farmington, MO..... 08/07/12 08/07... Industrial Sales (Workers). 81865 Sihi Pumps (Workers).... Grand Island, NY... 08/07/12 07/31/12 81866 Acme... Custom Technology, Windsor, CT........ 08/09/12 08/09/12 Inc., Engineering Design and Drafting Department...

Writing in the Park: Inquiry into Urban Youths' Place-Based Digital Writing Processes

ERIC Educational Resources Information Center

Silva, Bethany

2017-01-01

Theories of writing process have informed the teaching of writing for the past forty years, providing writing mentors with a language of prewriting, drafting, revising, editing, and publishing that broadens ways to invite young writers to approach composition. In the past forty years, new technologies for composition have impacted the products,…

75 FR 37975 - Energy Conservation Program for Consumer Products and Certain Commercial and Industrial Equipment...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-01

... technologies including induction and fluorescent lamps. 75 FR 22031, 22033 (April 27, 2010). In comments... of magnetic ballasts of 50,000 hours. After the 2003 draft report, Allegheny noted that MV ballast... considered only magnetic ballasts because they are the most common ballast used in HID lighting systems. DOE...

Environmental Quality Technology Demonstration, Evaluation and Transfer Activities

DTIC Science & Technology

1996-12-02

and Appropriate Requirements) and ARAR support documentation for interim and final Installation Restoration Program (IRP) remedial actions . During the...Relevant and Appropriate Requirements (ARARs) for Fort Devens , Massachusetts. Delivered Federal Environmental Legislative Power Curve in hard copy and... Remedial Actions . Delivered revised tables for Desk Guide on Interpretation of Applicable or Relevant and Appropriate Requirements — Interim Draft

Ensuring sustainability of non-networked sanitation technologies: an approach to standardization.

PubMed

Starkl, Markus; Brunner, Norbert; Feil, Magdalena; Hauser, Andreas

2015-06-02

Non-networked sanitation technologies use no sewer, water or electricity lines. Based on a review of 45 commercially distributed technologies, 12 (representing three concepts) were selected for a detailed audit. They were located in six countries of Africa and Asia. The safety of users was generally assured and the costs per use were not excessive, whereas costs were fully transparent for only one technology surveyed. A main drawback was insufficient quality of the byproducts from on-site treatment, making recycling in agriculture a hygienic and environmental risk. Further, no technology was sufficiently mature (requiring e.g. to shift wastes by hand). In order to promote further development and give producers of mature products a competitive advantage, the paper proposes a certification of technologies to confirm the fulfillment of basic requirements to make them attractive for future users.

[Historical materials of Chinese food hygiene (1927-1949)].

PubMed

Li, X; Wang, X

1997-01-01

The author discusses the situation on the work of food hygiene from 1928 to 1949 in China. During this period, the Health and Epidemic Prevention Bureau under the Ministry of Health were all in charge of food hygiene work. They formulated a series of standards, laws and rules on food hygiene which were carried out by hygienic policemen of the Bureau of Public Security. There were two ways for the education of food hygiene: Short-term course teaching class for food hygiene in medical college. The inspection and research work of food hygiene were performed by the Central Testing House of Hygiene, The Central Experimental Office of Hygienic Facilities and the Central Office of Epidemic Prevention and Nutritional Institute of the Health Office. After anti-Japanese war was broken out in 1937, food hygiene work were carried out mainly in the service in the war.

Proposed Activities to Address Regulatory Gaps and Challenges for Licensing Advanced Reactors Using Seismic Isolation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coleman, Justin Leigh; Kammerer, Annie M.; Whittaker, Andrew S.

Over the last decade, particularly since implementation of the certified design regulatory approaches outlined in 10 CFR 52, “Licenses, Certifications, and Approvals for Nuclear Power Plants,” interest has been increasing in the use of seismic isolation (SI) technology to support seismic safety in nuclear facilities. In 2009, the United States (U.S.) Nuclear Regulatory Commission (NRC) initiated research activities to develop new guidance targeted at isolated facilities because SI is being considered for nuclear power plants in the U.S. One product of that research, which was developed around a risk-informed regulatory approach, is a draft NRC NUREG series (NUREG/CR) report thatmore » investigates and discusses considerations for use of SI in otherwise traditionally founded large light water reactors (LWRs). A coordinated effort led to new provisions for SI of LWRs in the American Society of Civil Engineers standard ASCE/SEI 4-16, “Seismic Analysis of Safety Related Nuclear Structures.” The risk-informed design philosophy that underpinned development of the technical basis for these documents led to a set of proposed performance objectives and acceptance criteria intended to serve as the foundation for future NRC guidance on the use of SI and related technology. Although the guidance provided in the draft SI NUREG/CR report and ASCE/SEI 4 16 provides a sound basis for further development of nuclear power plant designs incorporating SI, these initial documents were focused on surface-founded or near-surface-founded LWRs and were, necessarily, limited in scope. For example, there is limited information in both the draft NUREG/CR report and ASCE/SEI 4-16 related to nonlinear analysis of soil-structure systems for deeply-embedded reactors, the isolation of components, and the use of vertical isolation systems. Also not included in the draft SI NUREG/CR report are special considerations for licensing of isolated facilities using the certified design approach in 10 CFR 52 and a detailed discussion of seismic probabilistic risk assessments for isolated facilities.« less

Machine Tool Advanced Skills Technology (MAST). Common Ground: Toward a Standards-Based Training System for the U.S. Machine Tool and Metal Related Industries. Volume 10: Computer-Aided Drafting & Design, of a 15-Volume Set of Skill Standards and Curriculum Training Materials for the Precision Manufacturing Industry.

ERIC Educational Resources Information Center

Texas State Technical Coll., Waco.

This document is intended to help education and training institutions deliver the Machine Tool Advanced Skills Technology (MAST) curriculum to a variety of individuals and organizations. MAST consists of industry-specific skill standards and model curricula for 15 occupational specialty areas within the U.S. machine tool and metals-related…

Solar Electric Propulsion (SEP) Systems for SMD Mission Needs. Technology Infusion Study.

NASA Technical Reports Server (NTRS)

Anderson, David

2014-01-01

Two presentations for SBAG and OPAG meetings: 1) Solar Electric Propulsion Systems for SMD Missions, and 2) Technology Infusion Study - Draft Findings Recommendation Small Bodies Assessment Group (SBAG) meeting is January 9th in Washington D.C., and the Outer Planets Assessment Group (OPAG) meeting is January 23-14 in Tucson, AZ. NASA sponsors these assessment groups, through the NRC, for the science community to assess and provide advice. These talks are to provide a status of 2 NASA activities, and to seek feedback from the respective science communities.

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 3 2013-10-01 2013-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 3 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 3 2012-10-01 2012-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 97.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 97.40-10... VESSELS OPERATIONS Markings on Vessels § 97.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 78.50-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 3 2011-10-01 2011-10-01 false Draft marks and draft indicating systems. 78.50-10... OPERATIONS Markings on Vessels § 78.50-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or rudderpost or any place...

46 CFR 196.40-10 - Draft marks and draft indicating systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Draft marks and draft indicating systems. 196.40-10... VESSELS OPERATIONS Markings on Vessels § 196.40-10 Draft marks and draft indicating systems. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

Effectiveness of a multimodal hand hygiene campaign and obstacles to success in Addis Ababa, Ethiopia

PubMed Central

2014-01-01

Background Hand hygiene is the cornerstone of infection control and reduces rates of healthcare associated infection. There are limited data evaluating hand hygiene adherence and hand hygiene campaign effect in resource-limited settings, especially in Sub-Saharan Africa. This study assessed the impact of implementing a World Health Organization (WHO)-recommended multimodal hand hygiene campaign at a hospital in Ethiopia. Methods This study included a before-and-after assessment of health care worker (HCW) adherence with WHO hand hygiene guidelines. It was implemented in three phases: 1) baseline evaluation of hand hygiene adherence and hospital infrastructure; 2) intervention (distribution of commercial hand sanitizer and implementation of an abbreviated WHO-recommended multimodal hand hygiene campaign); and 3) post-intervention evaluation of HCW hand hygiene adherence. HCWs’ perceptions of the campaign and hand sanitizer tolerability were assessed through a survey performed in the post-intervention period. Results At baseline, hand washing materials were infrequently available, with only 20% of sinks having hand-washing materials. There was a significant increase in hand hygiene adherence among HCWs following implementation of a WHO multimodal hand hygiene program. Adherence increased from 2.1% at baseline (21 hand hygiene actions/1000 opportunities for hand hygiene) to 12.7% (127 hand hygiene actions /1000 opportunities for hand hygiene) after the implementation of the hand hygiene campaign (OR = 6.8, 95% CI 4.2-10.9). Hand hygiene rates significantly increased among all HCW types except attending physicians. Independent predictors of HCW hand hygiene compliance included performing hand hygiene in the post-intervention period (aOR = 5.7, 95% CI 3.5-9.3), in the emergency department (aOR = 4.9, 95% CI 2.8-8.6), during patient care that did not involve Attending Physician Rounds (aOR = 2.4, 95% CI 1.2-4.5), and after patient contact (aOR = 2.1, 95% CI 1.4-3.3). In the perceptions survey, 64.0% of HCWs indicated preference for commercially manufactured hand sanitizer and 71.4% indicated their hand hygiene adherence would improve with commercial hand sanitizer. Conclusions There was a significant increase in hand hygiene adherence among Ethiopian HCWs following the implementation of a WHO-recommended multimodal hand hygiene campaign. Dissatisfaction with the current WHO-formulation for hand sanitizer was identified as a barrier to hand hygiene adherence in our setting. PMID:24636693

[Modern problems of maintenance of hygienic safety of drinking water consumption at the regional level].

PubMed

Tulakin, A V; Tsyplakova, G V; Ampleeva, G P; Kozyreva, O N; Pivneva, O S; Trukhina, G M

Problems of hygienic reliability of the drinking water use in regions of the Russian Federation are observed in the article. The optimization of the water use was shown must be based on the bearing in mind of regional peculiarities of the shaping of water quality of groundwater and surface sources of the water use, taking into account of the effectiveness of regional water protection programs, programs for water treatment, coordination of the activity of economic entities and oversight bodies in the management of water quality on the basis of socio-hygienic monitoring. Regional problems requiring hygienic justification and accounting, include such issues as complex hydrological, hydrogeological, climatic and geographical conditions, pronouncement of the severity of anthropogenic pollution of sources of water supply, natural conditions of the shaping of water quality, efficiency of the water treatment. There is need in the improvement of the problems of the water quality monitoring, including with the use of computer technology, which allows to realize regional hygienic monitoring and spatial-temporal analysis of the water quality, to model the water quality management, to predict conditions of the water use by population in regions taking into account peculiarities of the current health situation. In the article there is shown the practicability of the so-called complex concept of multiple barriers suggesting the combined use of chemical oxidation and physical methods of the preparation of drinking water. It is required the further development of legislation for the protection of water bodies from pollution with the bigging up the status of sanitary protection zones; timely revision of the regulatory framework, establishing sanitary-epidemiological requirements to potable water and drinking water supply. The problem of the provision of the population with safe drinking water requires complex solution within the framework of the implementation of target programs adopted at the Federal and regional levels.

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 1 2014-10-01 2014-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 1 2011-10-01 2011-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 1 2013-10-01 2013-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

46 CFR 32.05-1 - Draft marks and draft indicating systems-TB/ALL.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 1 2012-10-01 2012-10-01 false Draft marks and draft indicating systems-TB/ALL. 32.05-1..., MACHINERY, AND HULL REQUIREMENTS Markings § 32.05-1 Draft marks and draft indicating systems—TB/ALL. (a) All vessels must have draft marks plainly and legibly visible upon the stem and upon the sternpost or...

Oral Hygiene Levels in Children of Tribal Population of Eastern Ghats: An Epidemiological Study.

PubMed

Raju, P Krishnam; Vasanti, D; Kumar, J Raghavendra; Niranjani, K; Kumar, M S Saravana

2015-07-01

Oral hygiene has been given due importance since ages. Different cultures have been using different methods for the maintenance of good oral hygiene. The study was done to find out the oral hygiene levels in children of tribal population and to correlate the brushing methods used and the oral hygiene levels. A total of 5129 children of 5-12 years age (boys 2778, girls 2351) were checked for the simplified oral hygiene index in the study. The overall oral hygiene status of 1267 girls and 1348 boys was fair, whereas 821 girls and 937 boys was good and 263 girls and 493 boys was poor. It has been shown that fair oral hygiene practices were being followed by the children. Children using twigs and other materials for oral hygiene had nearly equally good oral hygiene when compared to the tooth brush and tooth paste, though children using toothbrush and tooth paste had slightly better oral hygiene.

Draft Genome Sequence, and a Sequence-Defined Genetic Linkage Map of the Legume Crop Species Lupinus angustifolius L

PubMed Central

Zheng, Zequn; Zhang, Qisen; Zhou, Gaofeng; Sweetingham, Mark W.; Howieson, John G.; Li, Chengdao

2013-01-01

Lupin (Lupinus angustifolius L.) is the most recently domesticated crop in major agricultural cultivation. Its seeds are high in protein and dietary fibre, but low in oil and starch. Medical and dietetic studies have shown that consuming lupin-enriched food has significant health benefits. We report the draft assembly from a whole genome shotgun sequencing dataset for this legume species with 26.9x coverage of the genome, which is predicted to contain 57,807 genes. Analysis of the annotated genes with metabolic pathways provided a partial understanding of some key features of lupin, such as the amino acid profile of storage proteins in seeds. Furthermore, we applied the NGS-based RAD-sequencing technology to obtain 8,244 sequence-defined markers for anchoring the genomic sequences. A total of 4,214 scaffolds from the genome sequence assembly were aligned into the genetic map. The combination of the draft assembly and a sequence-defined genetic map made it possible to locate and study functional genes of agronomic interest. The identification of co-segregating SNP markers, scaffold sequences and gene annotation facilitated the identification of a candidate R gene associated with resistance to the major lupin disease anthracnose. We demonstrated that the combination of medium-depth genome sequencing and a high-density genetic linkage map by application of NGS technology is a cost-effective approach to generating genome sequence data and a large number of molecular markers to study the genomics, genetics and functional genes of lupin, and to apply them to molecular plant breeding. This strategy does not require prior genome knowledge, which potentiates its application to a wide range of non-model species. PMID:23734219

Draft genome sequence, and a sequence-defined genetic linkage map of the legume crop species Lupinus angustifolius L.

PubMed

Yang, Huaan; Tao, Ye; Zheng, Zequn; Zhang, Qisen; Zhou, Gaofeng; Sweetingham, Mark W; Howieson, John G; Li, Chengdao

2013-01-01

Lupin (Lupinus angustifolius L.) is the most recently domesticated crop in major agricultural cultivation. Its seeds are high in protein and dietary fibre, but low in oil and starch. Medical and dietetic studies have shown that consuming lupin-enriched food has significant health benefits. We report the draft assembly from a whole genome shotgun sequencing dataset for this legume species with 26.9x coverage of the genome, which is predicted to contain 57,807 genes. Analysis of the annotated genes with metabolic pathways provided a partial understanding of some key features of lupin, such as the amino acid profile of storage proteins in seeds. Furthermore, we applied the NGS-based RAD-sequencing technology to obtain 8,244 sequence-defined markers for anchoring the genomic sequences. A total of 4,214 scaffolds from the genome sequence assembly were aligned into the genetic map. The combination of the draft assembly and a sequence-defined genetic map made it possible to locate and study functional genes of agronomic interest. The identification of co-segregating SNP markers, scaffold sequences and gene annotation facilitated the identification of a candidate R gene associated with resistance to the major lupin disease anthracnose. We demonstrated that the combination of medium-depth genome sequencing and a high-density genetic linkage map by application of NGS technology is a cost-effective approach to generating genome sequence data and a large number of molecular markers to study the genomics, genetics and functional genes of lupin, and to apply them to molecular plant breeding. This strategy does not require prior genome knowledge, which potentiates its application to a wide range of non-model species.

Perceptions of Dental Hygiene Master's Degree Learners About Dental Hygiene Doctoral Education.

PubMed

Tumath, Ursula G M; Walsh, Margaret

2015-08-01

To determine perceptions about dental hygiene doctoral education among dental hygiene master's degree program enrollees. In this cross-sectional national study, all dental hygiene master degree program directors were sent an email requesting they forward an attached consent form and online-survey-link to their graduate learners. The 29-item online survey assessed their perceptions about need for, importance of and interest in applying to proposed dental hygiene doctoral degree programs. A second-request was sent 1 month later to capture non-responders. Frequencies and cross-tabulations of responses were analyzed using the online software program, Qualtrics.™ Of the 255 graduate learners enrolled in 2014 reported by dental hygiene program directors, 159 completed the survey for a 62% response rate. The majority of respondents (77%) indicated that doctoral education in dental hygiene is needed for the advancement of the dental hygiene discipline and such programs are important to the dental hygiene profession (89%). Although most respondents supported both the PhD in dental hygiene and the Doctor of Dental Hygiene Practice (DDHP) degrees, more were interested in applying to a DDHP program (62%) than to a dental hygiene PhD program (38%). In addition, 43% expressed interest in enrolling in a doctoral degree program in the next 1 to 5 years and most preferred a hybrid online/onsite program format. The most frequently reported reasons for pursing a doctoral degree were: to become a better teacher, to expand clinical practice opportunities, to become a better researcher and to increase salary. Most dental hygiene master degree learners in this study believed doctoral dental hygiene education is needed and important to the dental hygiene discipline and profession, and were interested in applying to such programs. Future research is needed in this area. Copyright © 2015 The American Dental Hygienists’ Association.

The impact of an oral hygiene education module on patient practices and nursing documentation.

PubMed

Coke, Lola; Otten, Karine; Staffileno, Beth; Minarich, Laura; Nowiszewski, Candice

2015-02-01

Oral hygiene is inconsistent among patients with cancer and is a national patient care issue. To promote comfort and nutritional status, oral hygiene for patients with cancer is important. The purpose of this study was to develop an evidence-based oral hygiene educational module (EM) for nursing and patient care technician (PCT) staff to promote consistent oral hygiene patient education; evaluate patient understanding of oral hygiene practices post-EM; and determine staff documentation frequency of oral hygiene care. Pre- and post-EM data were collected using a developed oral hygiene assessment tool; nursing documentation data were collected by chart review. Post-EM data were collected eight weeks post-EM. Data were analyzed using frequencies and the Mann-Whitney U test. Twenty-two patient documentation pairs were collected. Compared to pre-EM, admission teaching, patient education, and patient oral hygiene practices improved post-EM. Post-EM oral hygiene documentation and PCT teaching increased.

Drafting Fundamentals. Drafting Module 1. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. The guide contains a cross-reference table of instructional materials. Ten units cover drafting fundamentals: (1) introduction to drafting; (2) general safety;…

A SOCIO-ECONOMIST LOOKS AT THE CURRENT VALUES AND CHANGING NEEDS OF YOUTH. FINAL DRAFT.

ERIC Educational Resources Information Center

THEOBALD, ROBERT

MAN HAS ACHIEVED THE POWER TO CREATE AN ENVIRONMENT SUITED TO HIS NEEDS. THIS POWER COMES FROM DEVELOPMENTS IN THE UTILIZATION OF ENERGY, ADVANCEMENTS IN CHEMISTRY, AN INCREASE IN SCIENTIFIC PROBLEM SOLVING ABILITY AND COMPUTER TECHNOLOGY. THESE SOURCES OF POWER RESULT IN THE DRIVE TOWARD THE DEVELOPMENT OF DESTRUCTIVE POWER, THE CAPABILITY OF…

The Technology of Unequal Rights for Women: Patent Drawings of a Voting Machine

ERIC Educational Resources Information Center

Hussey, Michael

2008-01-01

In 1878, Senator Aaron A. Sargent of California introduced to the Senate an amendment to the Constitution "Conferring upon Women the Right of Suffrage." Drafted by Susan B. Anthony, this same amendment would be introduced on a near-yearly basis until its final passage by Congress on May 19, 1919. Varying degrees of voting rights presented an…

78 FR 67348 - Invitation for Public Comment on Draft Test Plan for the High Burnup Dry Storage Cask Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-12

... will be executed will be added when Dominion Virginia Power, who is part of the Electric Power research... Electric Power Research Institute (EPRI) to document what is planned to be accomplished by the CDP. DOE is... Storage Cask Research and Development Project (CDP) AGENCY: Fuel Cycle Technologies, Office of Nuclear...

76 FR 52972 - United States v. Regal Beloit Corp. and A.O. Smith Corp.; Proposed Final Judgment and Competitive...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-24

... magnet technology, thereby allowing the motor to run more efficiently. 15. Motors sold for use in pool...-efficient motors because pool pumps typically run for many hours a day, sometimes even continuously. Pool... and fan blades are among the more difficult design aspects of furnace draft inducers. 51. Furnaces are...

Functional Drafting, Drafting--Intermediate: 9255.02.

ERIC Educational Resources Information Center

Dade County Public Schools, Miami, FL.

The course consists of six instructional blocks totaling 135 clock hours: (1) functional drafting, (2) threads and fasteners, (3) pictorial drawings, (4) introduction to electronic drafting, (5) introduction to piping drafting, and (6) Quinmester posttest. Mastery of skills indicated in Drafting-Basic--9255.01 is a prerequisite. In the functional…

76 FR 41808 - Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-15

...] Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric Delivery..., announce the availability of the draft environmental impact statement and the draft Oncor Electric Delivery... Oncor Electric Delivery Company, LLC (Applicant; Oncor), and (2) That the Applicant has developed a...

A Computer Model of Drafting Effects on Collective Behavior in Elite 10,000-m Runners.

PubMed

Trenchard, Hugh; Renfree, Andrew; Peters, Derek M

2017-03-01

Drafting in cycling influences collective behavior of pelotons. Although evidence for collective behavior in competitive running events exists, it is not clear if this results from energetic savings conferred by drafting. This study modeled the effects of drafting on behavior in elite 10,000-m runners. Using performance data from a men's elite 10,000-m track running event, computer simulations were constructed using Netlogo 5.1 to test the effects of 3 different drafting quantities on collective behavior: no drafting, drafting to 3 m behind with up to ~8% energy savings (a realistic running draft), and drafting up to 3 m behind with up to 38% energy savings (a realistic cycling draft). Three measures of collective behavior were analyzed in each condition: mean speed, mean group stretch (distance between first- and last-placed runner), and runner-convergence ratio (RCR), which represents the degree of drafting benefit obtained by the follower in a pair of coupled runners. Mean speeds were 6.32 ± 0.28, 5.57 ± 0.18, and 5.51 ± 0.13 m/s in the cycling-draft, runner-draft, and no-draft conditions, respectively (all P < .001). RCR was lower in the cycling-draft condition but did not differ between the other 2. Mean stretch did not differ between conditions. Collective behaviors observed in running events cannot be fully explained through energetic savings conferred by realistic drafting benefits. They may therefore result from other, possibly psychological, processes. The benefits or otherwise of engaging in such behavior are as yet unclear.

Review of the Draft 2014 Science Mission Directorate Science Plan

NASA Technical Reports Server (NTRS)

2013-01-01

At the request of NASA's Science Mission Directorate (SMD), the National Research Council's (NRC's) Space Studies Board (SSB) initiated a study to review a draft of the SMD's 2014 Science Plan. The request for this review was made at a time when NASA is engaged in the final stages of a comprehensive, agency-wide effort to develop a new strategic plan and at a time when NASA's budget is under considerable stress. SMD's Science Plan serves to provide more detail on its four traditional science disciplines-astronomy and astrophysics, solar and space physics (also called heliophysics), planetary science, and Earth remote sensing and related activities-than is possible in the agency-wide Strategic Plan. In conducting its review of the draft Science Plan, the Committee on the Assessment of the NASA Science Mission Directorate 2014 Science Plan was charged to comment on the following specific areas: (1) Responsiveness to the NRC's guidance on key science issues and opportunities in recent NRC reports; (2) Attention to interdisciplinary aspects and overall scientific balance; (3) Identification and exposition of important opportunities for partnerships as well as education and public outreach; (4) Integration of technology development with the science program; (5) Clarity on how the plan aligns with SMD's strategic planning process; (6) General readability and clarity of presentation; and (7) Other relevant issues as determined by the committee. The main body of the report provides detailed findings and recommendations relating to the draft Science Plan. The highest-level, crosscutting issues are summarized here, and more detail is available in the main body of the report.

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 4 2012-10-01 2012-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

33 CFR 401.29 - Maximum draft.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 4 2013-10-01 2013-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 4 2011-10-01 2011-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

33 CFR 401.29 - Maximum draft.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

46 CFR 131.220 - Drafts.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 4 2014-10-01 2014-10-01 false Drafts. 131.220 Section 131.220 Shipping COAST GUARD... Drafts. (a) Each vessel must have the drafts of the vessel plainly and legibly marked upon the stem and... easy observance. The bottom of each mark must indicate the draft. (b) Each draft must be taken from the...

76 FR 57760 - Notice of Availability of Draft Resource Management Plan and Draft Environmental Impact Statement...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Availability of Draft Resource Management Plan and Draft Environmental Impact Statement for the Colorado River... prepared a Draft Resource Management Plan (RMP) and Draft Environmental Impact Statement (EIS) for the... alternative) seeks to allocate limited resources among competing human interests, land uses, and conservation...

33 CFR 401.29 - Maximum draft.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Maximum draft. 401.29 Section 401... TRANSPORTATION SEAWAY REGULATIONS AND RULES Regulations Seaway Navigation § 401.29 Maximum draft. (a) The draft...) The draft of a vessel shall not, in any case, exceed 79.2 dm or the maximum permissible draft...

76 FR 59732 - Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-27

...] Draft Environmental Impact Statement and Draft Habitat Conservation Plan for Oncor Electric Delivery... availability of the draft environmental impact statement (DEIS) and the draft Oncor Electric Delivery Company... announced that Oncor Electric Delivery Company, LLC, has applied under section 10(a)(1)(B) of the Endangered...

History of dental hygiene research.

PubMed

Bowen, Denise M

2013-01-01

Dental hygiene is defined as the science and practice of the recognition, treatment and prevention of oral diseases. The history of dental hygiene research is considered in the context of the development of the discipline and an emerging infrastructure. Research-related events supporting the growth and maturation of the profession are considered from the early years to the most recent. The benefits of preventive oral health services provided by dental hygienists have been supported by research, and the practice of dental hygiene has expanded as a result of research findings since its inception 100 years ago. Dental hygienists' engagement in research, however, did not begin until the 1960s as research associates or administrators, primarily with dental researchers as primary investigators. The Journal of Dental Hygiene (JDH) has provided information for dental hygiene practice since 1927, and has been the primary venue for dissemination of dental hygiene research since 1945. Graduate education in dental hygiene at the master's degree level and the work of early dental hygiene researchers led to the first conference on dental hygiene research in 1982. Over 30 years later, dental hygiene has established a meta-paradigm and defined conceptual models, built an initial infrastructure to support research endeavors and contributed much to the development of dental hygiene as a unique discipline. A doctoral degree in the discipline, continued theory-based research, initiatives to foster collaborations between dental hygiene and other researchers and enhanced capabilities to attract funding to support large scale studies are goals that must be attained through the efforts of future researchers to address the needs for additional development in the discipline of dental hygiene. Dental hygiene research supports the growing discipline and its value to society.

Translations on USSR Science and Technology Biomedical Sciences No. 12

DTIC Science & Technology

1977-10-25

PUBLICATIONS JPRS publications may be ordered from the National Technical Information Service, Springfield, Virginia 22151. In order- ing, it is...Reports Announcements issued semi-monthly by the National Technical Information Service, and are listed in the Monthly Catalog of U.S. Government...hygienic norms and requirements into national economic practice. During the period 1971-1978 various stand- ards will be prepared within the CEMA

[The hygienic characteristics of the medical technology accompaniment to the development, creation and operation of installations equipped with video display terminals].

PubMed

Prygun, A V; Lazarev, N V

1998-10-01

Radiation measuring on the work places of operators in command and control installations proved that environment parameters depending on electronic display functioning are in line with the regulations' requirements. Nevertheless the operator health estimates show that the problem of personnel security still exists. The authors recommend some measures to improve the situation.

A natural history of hygiene

PubMed Central

Curtis, Valerie A

2007-01-01

In unpacking the Pandora's box of hygiene, the author looks into its ancient evolutionary history and its more recent human history. Within the box, she finds animal behaviour, dirt, disgust and many diseases, as well as illumination concerning how hygiene can be improved. It is suggested that hygiene is the set of behaviours that animals, including humans, use to avoid harmful agents. The author argues that hygiene has an ancient evolutionary history, and that most animals exhibit such behaviours because they are adaptive. In humans, responses to most infectious threats are accompanied by sensations of disgust. In historical times, religions, social codes and the sciences have all provided rationales for hygiene behaviour. However, the author argues that disgust and hygiene behaviour came first, and that the rationales came later. The implications for the modern-day practice of hygiene are profound. The natural history of hygiene needs to be better understood if we are to promote safe hygiene and, hence, win our evolutionary war against the agents of infectious disease. PMID:18923689

‘Cleanse or Die’: British Naval Hygiene in the Age of Steam, 1840–1900

PubMed Central

Smith, Elise Juzda

2018-01-01

This article focuses on the consolidation of naval hygiene practices during the Victorian era, a period of profound medical change that coincided with the fleet’s transition from sail to steam. The ironclads of the mid- to late- nineteenth century offered ample opportunities to improve preventive medicine at sea, and surgeons capitalised on new steam technologies to provide cleaner, dryer, and airier surroundings below decks. Such efforts reflected the sanitarian idealism of naval medicine in this period, inherited from the eighteenth-century pioneers of the discipline. Yet, despite the scientific thrust of Victorian naval medicine, with its emphasis on collecting measurements and collating statistics, consensus about the causes of disease eluded practitioners. It proved almost impossible to eradicate sickness at sea, and the enclosed nature of naval vessels showed the limitations – rather than the promise – of attempting to enforce absolute environmental controls. Nonetheless, sanitarian ideology prevailed throughout the steam age, and the hygienic reforms enacted throughout the fleet showed some of the same successes that attended the public health movement on land. It was thus despite shifting ideas about disease and new methods of investigation that naval medicine remained wedded to its sanitarian roots until the close of the nineteenth century. PMID:29553010

[Contribution of microbiologists of Kirov City to development of penicillin and streptomycin production processes (70 years since development of technology for submerged production of first domestic antibiotics)].

PubMed

Bakulin, M K; Tumanov, A S; Bakulin, V M; Kalininskiĭ, V B

2014-01-01

The publication is concerned with development of the technological processes for submered production of the first domestic antibiotics 70 years age. The literature data on the contribution of the microbiologists of the Kirov City and mainly the workers of the Red Army Research Institute of Epidemiology and Hygiene (nowadays Central Research Institute No. 48 of the Ministry of Defense of the Russian Federation, Kirov), to development of the manufacture processes for production of penicillin and streptomycin are reviewed.

Possibilities to improve the aircraft interior comfort experience.

PubMed

Vink, P; Bazley, C; Kamp, I; Blok, M

2012-03-01

Comfort plays an increasingly important role in the interior design of airplanes. Although ample research has been conducted on airplane design technology, only a small amount of public scientific information is available addressing the passenger's opinion. In this study, more than 10,000 internet trip reports and 153 passenger interviews were used to gather opinions about aspects which need to be improved in order to design a more comfortable aircraft interior. The results show clear relationships between comfort and legroom, hygiene, crew attention and seat/personal space. Passengers rate the newer planes significantly better than older ones, indicating that attention to design for comfort has proven effective. The study also shows that rude flight attendants and bad hygiene reduce the comfort experience drastically and that a high comfort rating is related to higher "fly again" values. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Automatic draft reading based on image processing

NASA Astrophysics Data System (ADS)

Tsujii, Takahiro; Yoshida, Hiromi; Iiguni, Youji

2016-10-01

In marine transportation, a draft survey is a means to determine the quantity of bulk cargo. Automatic draft reading based on computer image processing has been proposed. However, the conventional draft mark segmentation may fail when the video sequence has many other regions than draft marks and a hull, and the estimated waterline is inherently higher than the true one. To solve these problems, we propose an automatic draft reading method that uses morphological operations to detect draft marks and estimate the waterline for every frame with Canny edge detection and a robust estimation. Moreover, we emulate surveyors' draft reading process for getting the understanding of a shipper and a receiver. In an experiment in a towing tank, the draft reading error of the proposed method was <1 cm, showing the advantage of the proposed method. It is also shown that accurate draft reading has been achieved in a real-world scene.

An Assessment of the Technical Readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR) Technology

NASA Technical Reports Server (NTRS)

Flynn, Michael

2000-01-01

This poster provides an assessment of the technical readiness of the Vapor Phase Catalytic Ammonia Removal Process (VPCAR). The VPCAR technology is a fully regenerative water recycling technology designed specifically for applications such as a near term Mars exploration mission. The VPCAR technology is a highly integrated distillation/catalytic oxidation based water processor. It is designed to accept a combined wastewater stream (urine, condensate, and hygiene) and produces potable water in a single process step which requires -no regularly scheduled re-supply or maintenance for a 3 year mission. The technology is designed to be modular and to fit into a volume comparable to a single International Space Station Rack (when sized for a crew of 6). This poster provides a description of the VPCAR technology and a summary of the current performance of the technology. Also provided are the results of two separate NASA sponsored system trade studies which investigated the potential payback of further development of the VPCAR technology.

Predictors of respiratory hygiene/cough etiquette in a large community in Korea: A descriptive study.

PubMed

Choi, Jeong Sil; Kim, Kyung Mi

2016-11-01

This study was conducted to investigate the level of knowledge about and practice of respiratory hygiene/cough etiquette among the general population of Korea and to identify the factors that may influence the practice of respiratory hygiene and cough etiquette. The mean correct answer rate for knowledge of respiratory hygiene/cough etiquette was 56.1%. Predictors of respiratory hygiene/cough etiquette practice were carrying a handkerchief or tissues, prior education on respiratory hygiene/cough etiquette, awareness level of respiratory hygiene/cough etiquette, daily frequency of handwashing, and knowledge level of respiratory hygiene/cough etiquette. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Drafting: Current Trends and Future Practices

ERIC Educational Resources Information Center

Jensen, C.

1976-01-01

Various research findings are reported on drafting trends which the author feels should be incorporated into teaching drafting: (1) true position and geometric tolerancing, (2) decimal and metric dimensioning, (3) functional drafting, (4) automated drafting, and (5) drawing reproductions. (BP)

Evaluation of a multimedia online tool for teaching bronchial hygiene to physical therapy students.

PubMed

Silva, Cibele C B Marques da; Toledo, Sonia L P; Silveira, Paulo S P; Carvalho, Celso R F

2012-01-01

Advances in information technology have been widely used in teaching health care professionals. The use of multimedia resources may be important for clinical learning and we are not aware of previous reports using such technology in respiratory physical therapy education. Our approach was to evaluate a conventional bronchial hygiene techniques (BHTs) course with an interactive online environment, including multimedia resources. Previous developed audiovisual support material comprised: physiology, physiopathology and BHTs, accessible to students through the Internet in conjunction with BHTs classes. Two groups of students were compared and both attended regular classes: the on-line group (n=8) received access to online resources, while the control group (n=8) received conventional written material. Student's performance was evaluated before and after the course. A preliminary test (score 0 to 10) was applied before the beginning of the course, showing that the initial knowledge of both groups was comparable [online, 6.75 (SD=0.88) vs. control, 6.125 (SD=1.35); p>0.05]. Two weeks after the end of the course, a second test showed that the online group performed significantly better than the control group [respectively, 7.75 (SD=1.28) vs. 5.93 (SD=0.72); p>0.05]. The use of a multimedia online resource had a positive impact on student's learning in respiratory therapy field in which instrumental and manual resources are often used and can be explored using this technology.

Effect of an oral health education program based on the use of quantitative light-induced fluorescence technology in Uzbekistan adolescents.

PubMed

Khudanov, Bakhtinur; Jung, Hoi In; Kahharova, Dono; Lee, Jeong-Woo; Hamidov, Ilhom; Lee, Eun-Song; Kim, Baek-Il

2018-03-01

The aim of this study was to determine whether an oral health education program using a Qscan device based on quantitative light-induced fluorescence (QLF) technology could improve the oral hygiene status and oral health literacy of adolescents. One hundred adolescents aged 14-16 years attending a school in Tashkent city were included in this study. The participants were assigned to the following two groups using permuted block randomization technique: (i) control group (traditional learning) and (ii) experimental group (Qscan device-based learning). The participants included in the experimental group received additional education and training on dental plaque removal using the Qscan device. The accumulated levels of plaque were assessed in all participants, who also completed questionnaires about their oral health status, oral health knowledge, attitude, and behavior during an 8-week period. There were statistically significant improvements in the experimental group compared to the control group in the plaque index (0.46 vs 0.07, p < .05), oral health knowledge (19.4 vs 28.8, p < .05), attitude (16.7 vs 20.2, p < .05), and behavior (19.9 vs 30.5, p < .05). This study has demonstrated that an oral health education program based on the use of QLF technology could be useful for improving the oral hygiene status and oral health literacy of adolescents in Uzbekistan. Copyright © 2018 Elsevier B.V. All rights reserved.

Factors associated with different hygiene practices in the homes of 15 month old infants

PubMed Central

Sherriff, A; Golding, J; The, A

2002-01-01

Background: Improved hygiene in Westernised regions of the world may be partly responsible for the increased prevalence of diseases of the immune system, such as asthma and atopy. There is a paucity of data on cleanliness norms in young children in the UK and there has been no attempt to identify factors that influence the adoption of particular hygiene practices in the home. Aims: To examine levels of hygiene in a contemporary cohort of children and identify social and lifestyle factors influencing hygiene practices in the home. Methods: The sample under study are participants in the Avon Longitudinal Study of Parents and Children (ALSPAC). Parental self completion questionnaires provided data on hygiene levels in children at 15 months of age, and a hygiene score was derived from these responses. Multivariable logistic regression models investigated associations between high hygiene scores (top quintile) and a number of perinatal, maternal, social, and environmental factors. Results: Maternal smoking during pregnancy, low maternal educational achievement, and living in local authority housing were factors independently associated with high hygiene scores, as was increased use of chemical household products. High hygiene scores were inversely related to living in damp housing and attendance at day care. There were no gender or ethnic differences in hygiene score. Conclusion: Important data on cleanliness norms for infants have been presented. The adoption of hygiene practices is influenced to some degree by social, lifestyle, and environmental factors—with higher hygiene scores occurring in more socially disadvantaged groups. Increased use of chemical household products in the more socially disadvantaged groups within ALSPAC has emerged as an important confounder in any study of hygiene and ill health. PMID:12089118

Draft Environmental Impact Statement (DEIS)

DTIC Science & Technology

2000-07-01

MCB Marine Corps Base MCCDC Marine Corps Combat Development Center MCHC Marine Corps Heritage Center MCHMD Marine Corps History and Museum...other federal agencies. In addition to the MCU, the base is the site of the Marine Corps Officer Candidate School (OCS), the Marine Corps Combat ...at the Air-Ground Museum to support instruction and research on combat doctrine, tactics, and technology. The Air-Ground Museum also loans items to

Numerical Control/Computer Aided Manufacturing (NC/CAM), A Descom Study

DTIC Science & Technology

1979-07-01

CAM machines operate directly from computers, but most get instructions in the form of punched tape. The applications of NC/CAM are virtually...Although most NC/CAM equipment is metal working, its applications include electronics manufacturing, glass making, food processing, materiel handling...drafting, woodworking, plastics and inspection, just to name a few. Numerical control, like most technologies, is an advancing and evolutionary process

Dynamically Stable Legged Locomotion

DTIC Science & Technology

1981-11-30

the laboratory. Harry Asada, Wayne Book, Nancy Cornelius, Sesh Murthy and Ivan Sutherland read various drafts of this report, for which we are...particularly helpful in providing an atmosphere where things could get started. Craig Fields and Clint Kelly deserve special credit for letting the idea of...legged technology capture their imaginations, even before we could show them tangible results. We are especially indebted to Ivan Sutherland for his

Special Advanced Studies for Pollution Prevention. Delivery Order 0058: The Monitor - Winter 2000

DTIC Science & Technology

2001-04-01

Burning/Open Detonation of Energetic Materials ➨Emission factors from a draft EPA report are incorporated into the guidance Site Restoration ➨Method...Aqueous Cleaner Recycle System Microfiltration Removes oil/grease & TSS from alkaline and acid cleaning baths Commodore Separation Technologies, Inc... Microfiltration Removes all heavy metals from wastewater and recycles water Infinity Chemicals Group Infinity Prep-L Deoxidizing Chemical

USSR Report, Science and Technology Policy.

DTIC Science & Technology

1987-05-28

rate on the basis of the priority allocation of capital investments in the technical retooling and reconstruction of existing production. Their...development, as well as in the drafting of proposals for reconstruction and for the creation of new capacities for series production. The comparison...of variants of reconstruction of an ore dressing combine, which was made in USSR Gosplan departments on the basis of the analysis of the efficiency

Impact of the International Nosocomial Infection Control Consortium (INICC) Multidimensional Hand Hygiene Approach, over 8 years, in 11 cities of Turkey.

PubMed

Leblebicioglu, Hakan; Koksal, Iftihar; Rosenthal, Victor D; Akan, Özay Arıkan; Özgültekin, Asu; Kendirli, Tanil; Erben, Nurettin; Yalcin, Ata Nevzat; Ulusoy, Sercan; Sirmatel, Fatma; Ozdemir, Davut; Alp, Emine; Yıldızdaş, Dinçer; Esen, Saban; Ulger, Fatma; Dilek, Ahmet; Yilmaz, Hava; Yýlmaz, Gürdal; Kaya, Selçuk; Ulusoy, Hülya; Tulunay, Melek; Oral, Mehmet; Ünal, Necmettin; Turan, Güldem; Akgün, Nur; İnan, Asuman; Ince, Erdal; Karbuz, Adem; Çiftçi, Ergin; Taşyapar, Nevin; Güneş, Melek; Ozgunes, Ilhan; Usluer, Gaye; Turhan, Ozge; Gunay, Nurgul; Gumus, Eylul; Dursun, Oguz; Arda, Bilgin; Bacakoglu, Feza; Cengiz, Mustafa; Yilmaz, Leyla; Geyik, Mehmet Faruk; Şahin, Ahmet; Erdogan, Selvi; Kılıc, Aysegul Ulu; Horoz, Ozden Ozgur

2015-07-01

To evaluate the effectiveness of the International Nosocomial Infection Control Consortium (INICC) Multidimensional Hand Hygiene Approach in Turkey and analyse predictors of poor hand hygiene compliance. An observational, prospective, interventional, before-and-after study was conducted from August 2003 to August 2011 in 12 intensive care units (ICU) of 12 hospitals in 11 cities. The study was divided into a baseline and a follow-up period and included random 30-minute observations for hand hygiene compliance in ICU. The hand hygiene approach included administrative support, supplies availability, education and training, reminders in the workplace, process surveillance, and performance feedback. We observed 21,145 opportunities for hand hygiene. Overall hand hygiene compliance increased from 28.8% to 91% (95% CI 87.6-93.0, p 0.0001). Multivariate and univariate analyses showed that several variables were significantly associated with poor hand hygiene compliance: males vs. females (39% vs. 48%; 95% CI 0.79-0.84, p 0.0001), ancillary staff vs. physicians (35% vs. 46%, 95% CI 0.73-0.78, p 0.0001), and adult vs. pediatric ICUs (42% vs. 74%, 95% CI 0.54-0.60, p 0.0001). Adherence to hand hygiene was significantly increased with the INICC Hand Hygiene Approach. Specific programmes should be directed to improve hand hygiene in variables found to be predictors of poor hand hygiene compliance.

Hand hygiene--comparison of international recommendations.

PubMed

Wendt, C

2001-08-01

The value of hand hygiene for the prevention of cross-infection was first observed in the middle of the 19th century. Since then, which procedure is the most suitable for hand hygiene has been repeatedly discussed and several different guidelines and recommendations have been published. The aim of this review is to compare different recommendations for hand hygiene regarding technique and indication. Medline, the internet and a personal library were searched to obtain as many written recommendations as possible. In addition, a small questionnaire was sent by e-mail to 20 international colleagues. As a result, written recommendations from 10 countries could be compared. Recommended methods of hand hygiene include handwashing (washing hands with plain soap), hygienic handwash (washing hands with medicated soap) and hygienic hand-rub (use of antiseptic rubs). In most countries handwashing and hygienic handwash are the methods of choice and only in central European countries is hygienic hand-rub the preferred technique. Situations in which performance of hand hygiene is recommended are comparable. However, no single indication is recommended in all guidelines. Hand hygiene is most often recommended before performing invasive procedures and after microbial contamination. Guidelines should be clear and easy to follow for them to become standard of care. Thus, guidelines are needed that do not leave to the health care worker a decision as to whether hand hygiene is indicated.

Review of indicators for cross-sectoral optimization of nosocomial infection prophylaxis – a perspective from structurally- and process-oriented hygiene

PubMed Central

Hübner, Nils-Olaf; Fleßa, Steffen; Jakisch, Ralf; Assadian, Ojan; Kramer, Axel

2012-01-01

In the care of patients, the prevention of nosocomial infections is crucial. For it to be successful, cross-sectoral, interface-oriented hygiene quality management is necessary. The goal is to apply the HACCP (Hazard Assessment and Critical Control Points) concept to hospital hygiene, in order to create a multi-dimensional hygiene control system based on hygiene indicators that will overcome the limitations of a procedurally non-integrated and non-cross-sectoral view of hygiene. Three critical risk dimensions can be identified for the implementation of three-dimensional quality control of hygiene in clinical routine: the constitution of the person concerned, the surrounding physical structures and technical equipment, and the medical procedures. In these dimensions, the establishment of indicators and threshold values enables a comprehensive assessment of hygiene quality. Thus, the cross-sectoral evaluation of the quality of structure, processes and results is decisive for the success of integrated infection prophylaxis. This study lays the foundation for hygiene indicator requirements and develops initial concepts for evaluating quality management in hygiene. PMID:22558049

[Hygiene and Infection Prevention in Medical Institutions, Kindergartens and Schools - Statutory Basis, Infection Control Practice and Experiences of the Public Health Services].

PubMed

Heudorf, U

2015-07-01

Infection prevention is one of the main tasks of the public health services. The "Protection against infection act" places all medical institutions and facilities for children (kindergartens and schools) under the obligation to assume responsibility and to cooperate. Duties of the institutions are described, and public health services are obliged to perform hygiene control visits.Regarding medical institutions, the guidelines of the German Commission on Hospital Hygiene and Infection Control have to be observed, and the counties were obliged to publish hygiene enactments. Subsequently, good improvements in hygiene management in medical institutions were achieved. In schools, however, severe hygienic problems (i.e. sanitary hygiene, indoor air hygiene) are detected, without any improvement - obviously due to a missing sense of responsibility in the school community. Causes for poor behaviour prevention (hand hygiene, ventilation) and missing situational prevention (i.e. cleaning) are discussed. Without reversion to the obviously needed but nearly forgotten subject school hygiene, obligatory guidelines and the assuming of responsibility, permanent improvements cannot be achieved. © Georg Thieme Verlag KG Stuttgart · New York.

Back to basics: hand hygiene and surgical hand antisepsis.

PubMed

Spruce, Lisa

2013-11-01

Health care-associated infections (HAIs) are a significant issue in the United States and throughout the world, but following proper hand hygiene practices is the most effective and least expensive way to prevent HAIs. Hand hygiene is inexpensive and protects patients and health care personnel alike. The four general types of hand hygiene that should be performed in the perioperative environment are washing hands that are visibly soiled, hand hygiene using alcohol-based products, surgical hand scrubs, and surgical hand scrubs using an alcohol-based surgical hand rub product. Barriers to proper hand hygiene may include not thinking about it, forgetting, skin irritation, a lack of role models, or a lack of a safety culture. One strategy for improving hand hygiene practices is monitoring hand hygiene as part of a quality improvement project, but the most important aspect for perioperative team members is to set an example for other team members by following proper hand hygiene practices and reminding each other to perform hand hygiene. Copyright © 2013 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Draft genome sequence of Escherichia coli ST977: A clinical multidrug-resistant strain harbouring blaNDM-3 isolated from a bloodstream infection.

PubMed

Li, Xi; Sun, Long; Zhu, Yongze; Shen, Mengyuan; Tu, Yuexing

2018-04-14

The emergence of carbapenem-resistant Escherichia coli has become a serious challenge to manage in the clinic because of multidrug resistance. Here we report the draft genome sequence of NDM-3-producing E. coli strain NT1 isolated from a bloodstream infection in China. Whole genomic DNA of E. coli strain NT1 was extracted and was sequenced using an Illumina HiSeq™ X Ten platform. The generated sequence reads were assembled using CLC Genomics Workbench. The draft genome was annotated using Rapid Annotation using Subsystem Technology (RAST). Bioinformatics analysis was further performed. The genome size was calculated at 5,353 620bp, with 5297 protein-coding sequences and the presence of genes conferring resistance to aminoglycosides, β-lactams, quinolones, macrolides, phenicols, sulphonamides, tetracycline and trimethoprim. In addition, genes encoding virulence factors were also identified. To our knowledge, this is the first report of an E. coli strain producing NDM-3 isolated from a human bloodstream infection. The genome sequence will provide valuable information to understand antibiotic resistance mechanisms and pathogenic mechanisms in this strain. Close surveillance is urgently needed to monitor the spread of NDM-3-producing isolates. Copyright © 2018 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

How to Develop Electrochemistry SETS-Based Interactive E-Book?

NASA Astrophysics Data System (ADS)

Munawwarah, M.; Anwar, S.; Sunarya, Y.

2017-09-01

This study aims to develop SETS-based interactive e-book teaching material through 4S TMD methode. The research methode in this study is the Development Research (RD) Richey and Klein that consists of design, phase, and evaluation. The design step was to analyze and plan the types of teaching materials instructional developed. There are 12 indicators from 3 standard competences that produced in selection step based new curriculum, the compatibility subject matter and indicators, and the relations between value and subject matter. Structuring steps yield concept map, macro structure, and multiple representation that were arranged to be first draft of teaching material that was used for develop the instruments for characterization step. Chatacterization test have been done to students in 12nd grades with 68 texts. Characterization results indicated that there were some texts included to difficult text. Difficult texts have been reduced with the ways back to qualitative steps and particulation. The second draft of teaching material was arranged based the results of didactic reduction of difficult texts. This draft was used for arranged interactive e-book. The characteristics of this SETS-based interactive e-book that developed were mention about the connection between science with environment, technology, and society. This interactive e-book consists of animation, task, and quizes that taken the interaction of students directly.

A high-coverage draft genome of the mycalesine butterfly Bicyclus anynana.

PubMed

Nowell, Reuben W; Elsworth, Ben; Oostra, Vicencio; Zwaan, Bas J; Wheat, Christopher W; Saastamoinen, Marjo; Saccheri, Ilik J; Van't Hof, Arjen E; Wasik, Bethany R; Connahs, Heidi; Aslam, Muhammad L; Kumar, Sujai; Challis, Richard J; Monteiro, Antónia; Brakefield, Paul M; Blaxter, Mark

2017-07-01

The mycalesine butterfly Bicyclus anynana, the "Squinting bush brown," is a model organism in the study of lepidopteran ecology, development, and evolution. Here, we present a draft genome sequence for B. anynana to serve as a genomics resource for current and future studies of this important model species. Seven libraries with insert sizes ranging from 350 bp to 20 kb were constructed using DNA from an inbred female and sequenced using both Illumina and PacBio technology; 128 Gb of raw Illumina data was filtered to 124 Gb and assembled to a final size of 475 Mb (∼×260 assembly coverage). Contigs were scaffolded using mate-pair, transcriptome, and PacBio data into 10 800 sequences with an N50 of 638 kb (longest scaffold 5 Mb). The genome is comprised of 26% repetitive elements and encodes a total of 22 642 predicted protein-coding genes. Recovery of a BUSCO set of core metazoan genes was almost complete (98%). Overall, these metrics compare well with other recently published lepidopteran genomes. We report a high-quality draft genome sequence for Bicyclus anynana. The genome assembly and annotated gene models are available at LepBase (http://ensembl.lepbase.org/index.html). © The Authors 2017. Published by Oxford University Press.

A high-coverage draft genome of the mycalesine butterfly Bicyclus anynana

PubMed Central

Elsworth, Ben; Oostra, Vicencio; Zwaan, Bas J.; Wheat, Christopher W.; Saastamoinen, Marjo; Saccheri, Ilik J.; van’t Hof, Arjen E.; Wasik, Bethany R.; Connahs, Heidi; Aslam, Muhammad L.; Kumar, Sujai; Challis, Richard J.; Monteiro, Antónia; Brakefield, Paul M.

2017-01-01

Abstract The mycalesine butterfly Bicyclus anynana, the “Squinting bush brown,” is a model organism in the study of lepidopteran ecology, development, and evolution. Here, we present a draft genome sequence for B. anynana to serve as a genomics resource for current and future studies of this important model species. Seven libraries with insert sizes ranging from 350 bp to 20 kb were constructed using DNA from an inbred female and sequenced using both Illumina and PacBio technology; 128 Gb of raw Illumina data was filtered to 124 Gb and assembled to a final size of 475 Mb (∼×260 assembly coverage). Contigs were scaffolded using mate-pair, transcriptome, and PacBio data into 10 800 sequences with an N50 of 638 kb (longest scaffold 5 Mb). The genome is comprised of 26% repetitive elements and encodes a total of 22 642 predicted protein-coding genes. Recovery of a BUSCO set of core metazoan genes was almost complete (98%). Overall, these metrics compare well with other recently published lepidopteran genomes. We report a high-quality draft genome sequence for Bicyclus anynana. The genome assembly and annotated gene models are available at LepBase (http://ensembl.lepbase.org/index.html). PMID:28486658

Fumigating the Hygienic Model City: Bubonic Plague and the Sulfurozador in Early-Twentieth-Century Buenos Aires.

PubMed

Engelmann, Lukas

2018-07-01

The 1899/1900 arrival of bubonic plague in Argentina had thrown the model status of Buenos Aires as a hygienic city into crisis. Where the idea of foreign threats and imported epidemics had dominated the thinking of Argentina's sanitarians at that time, plague renewed concerns about hidden threats within the fabric of the capital's dense environment; concerns that led to new sanitary measures and unprecedented rat-campaigns supported by the large-scale application of sulphur dioxide. The article tells the story of early twentieth-century urban sanitation in Buenos Aires through the lens of a new industrial disinfection apparatus. The Aparato Marot, also known as Sulfurozador was acquired and integrated in the capital's sanitary administration by the epidemiologist José Penna in 1906 to materialise two key lessons learned from plague. First, the machine was supposed to translate the successful disinfection practices of global maritime sanitation into urban epidemic control in Argentina. Second, the machine's design enabled public health authorities to reinvigorate a traditional hygienic concern for the entirety of the city's terrain. While the Sulfurozador offered effective destruction of rats, it promised also a comprehensive - and utopian - disinfection of the whole city, freeing it from all imaginable pathogens, insects as well as rodents. In 1910, the successful introduction of the Sulfurozador encouraged Argentina's medico-political elite to introduce a new principle of 'general prophylaxis'. This article places the apparatus as a technological modernisation of traditional sanitary practices in the bacteriological age, which preserved the urban environment - 'el terreno' - as a principal site of intervention. Thus, the Sulfurozador allowed the 'higienistas' to sustain a long-standing utopian vision of all-encompassing social, bodily and political hygiene into the twentieth century.

The Oral Health Needs of Wisconsin Farmers and the Need for Patient Activation: A Pilot Study.

PubMed

Schroeder, Kelly; Gurenlian, JoAnn; Portillo, Karen

2017-01-01

This study aimed to determine the level of oral health need of Wisconsin farmers based on sociodemographic variables, perceived oral health, and actual oral health, and to evaluate the effectiveness of a dental hygiene patient activation intervention. Oral health screenings were administered by calibrated dental hygienists to 60 Wisconsin farmers attending the 2016 Wisconsin Farm Technology Days. Study participants self-administered the Oral Health Inventory Profile-14 survey and participated in an Adult Basic Screening Survey. Validity and reliability of both instruments have been established in previous studies. A follow-up phone call for Wisconsin farmers with a moderate- to high-risk oral health condition determined study participants followed the dental hygiene recommendations signified if study participants followed the dental hygiene recommendations and if patient activation had been achieved. Study participants represented Wisconsin farmers (N = 60; n = 32 men, n = 28 women) with an average age range between 50 and 60 years old. The Oral Health Impact Profile-14 survey results indicated that this group of Wisconsin farmers did not perceive themselves to have an oral health problem. The Adult Basic Screening Survey results also indicated that the majority of study participants did not currently have active oral disease. There were 32% (n = 19) who qualified for follow-up phone call, with 15% (n = 3) seeking oral health care based on the dental hygiene recommendation. Significant associations between sociodemographic variables and actual oral health were not found, and the null hypotheses were not rejected. Findings suggest that this group of Wisconsin farmers is receiving regular oral health care and patient activation despite literature suggesting that farmers and rural individuals might face unique barriers to health and oral health care.

A post-assembly genome-improvement toolkit (PAGIT) to obtain annotated genomes from contigs.

PubMed

Swain, Martin T; Tsai, Isheng J; Assefa, Samual A; Newbold, Chris; Berriman, Matthew; Otto, Thomas D

2012-06-07

Genome projects now produce draft assemblies within weeks owing to advanced high-throughput sequencing technologies. For milestone projects such as Escherichia coli or Homo sapiens, teams of scientists were employed to manually curate and finish these genomes to a high standard. Nowadays, this is not feasible for most projects, and the quality of genomes is generally of a much lower standard. This protocol describes software (PAGIT) that is used to improve the quality of draft genomes. It offers flexible functionality to close gaps in scaffolds, correct base errors in the consensus sequence and exploit reference genomes (if available) in order to improve scaffolding and generating annotations. The protocol is most accessible for bacterial and small eukaryotic genomes (up to 300 Mb), such as pathogenic bacteria, malaria and parasitic worms. Applying PAGIT to an E. coli assembly takes ∼24 h: it doubles the average contig size and annotates over 4,300 gene models.

Draft genome sequence of Bradyrhizobium sp. strain BR 3262, an effective microsymbiont recommended for cowpea inoculation in Brazil.

PubMed

Simões-Araújo, Jean Luiz; Leite, Jakson; Marie Rouws, Luc Felicianus; Passos, Samuel Ribeiro; Xavier, Gustavo Ribeiro; Rumjanek, Norma Gouvêa; Zilli, Jerri Édson

The strain BR 3262 was isolated from nodule of cowpea (Vigna unguiculata L. Walp) growing in soil of the Atlantic Forest area in Brazil and it is reported as an efficient nitrogen fixing bacterium associated to cowpea. Firstly, this strain was assigned as Bradyrhizobium elkanii, however, recently a more detailed genetic and molecular characterization has indicated it could be a Bradyrhizobium pachyrhizi species. We report here the draft genome sequence of B. pachyrhizi strain BR 3262, an elite bacterium used as inoculant for cowpea. The whole genome with 116 scaffolds, 8,965,178bp and 63.8% of C+G content for BR 3262 was obtained using Illumina MiSeq sequencing technology. Annotation was added by the RAST prokaryotic genome annotation service and shown 8369 coding sequences, 52 RNAs genes, classified in 504 subsystems. Published by Elsevier Editora Ltda.

Spiral optical designs for nonimaging applications

NASA Astrophysics Data System (ADS)

Zamora, Pablo; Benítez, Pablo; Miñano, Juan C.; Vilaplana, Juan; Buljan, Marina

2011-10-01

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. In some demanding nonimaging applications, these restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. Some of these spiral symmetry examples will be shown here, as well as their simulated results.

Spiral nonimaging optical designs

NASA Astrophysics Data System (ADS)

Zamora, Pablo; Benítez, Pablo; Miñano, Juan C.; Vilaplana, Juan

2011-10-01

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. In some demanding nonimaging applications, these restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. Some of these spiral symmetry examples will be shown here, as well as their simulated results.

Novel freeform optical surface design with spiral symmetry

NASA Astrophysics Data System (ADS)

Zamora, Pablo; Benítez, Pablo; Miñano, Juan C.; Vilaplana, Juan

2011-10-01

Manufacturing technologies as injection molding or embossing specify their production limits for minimum radii of the vertices or draft angle for demolding, for instance. These restrictions may limit the system optical efficiency or affect the generation of undesired artifacts on the illumination pattern when dealing with optical design. A novel manufacturing concept is presented here, in which the optical surfaces are not obtained from the usual revolution symmetry with respect to a central axis (z axis), but they are calculated as free-form surfaces describing a spiral trajectory around z axis. The main advantage of this new concept lies in the manufacturing process: a molded piece can be easily separated from its mold just by applying a combination of rotational movement around axis z and linear movement along axis z, even for negative draft angles. The general designing procedure will be described in detail.

Religious perspectives on the nuclear weapons debate: excerpts from the bishops' pastoral letter on war and peace, proposed third draft

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The text of the third draft, issued in April 1983 and approved by the bishops on 3 May 1983, focuses on the morality of the use of nuclear weapons in a first strike, the threat to use them, and their use as a deterrent to war, but it also includes discussions of the just war theory, nonviolence, and peacemaking. Viewed in the context of the traditional modes of accommodation between religion and the state, and in the light of contemporary disharmony between more fundamentalist sects and modern science, the document affords an interesting point for discussion of the moral basesmore » of the uses of technology. More than simply a dogmatic statement of one religious organization, the pastoral letter represents a vigorous new current in moral discretion and responsibility. 114 references.« less

Dental, Dental Hygiene, and Graduate Students' and Faculty Perspectives on Dental Hygienists' Professional Role and the Potential Contribution of a Peer Teaching Program.

PubMed

McComas, Martha J; Inglehart, Marita R

2016-09-01

The changing role of dental hygienists deserves dental and dental hygiene educators' attention. The first aim of this survey study was to assess University of Michigan dental, dental hygiene, and graduate students' and faculty members' perceptions of dental hygienists' roles; their attitudes and behaviors related to clinical interactions between dental and dental hygiene students; and perceived benefits of engaging dental hygiene students as peer teachers for dental students. The second aim was to assess whether one group of dental students' experiences with dental hygiene student peer teaching affected their perceptions of the dental hygiene profession. Survey respondents were 57 dental hygiene students in all three years of the program (response rate 60% to 100%); 476 dental students in all four years (response rate 56% to 100%); 28 dental and dental hygiene graduate students (response rate 28%); and 67 dental and dental hygiene faculty members (response rate 56%). Compared to the other groups, dental students reported the lowest average number of services dental hygienists can provide (p≤0.001) and the lowest average number of patient groups for which dental hygienists can provide periodontal care (p<0.001). Dental students also had the least positive attitudes about clinical interactions between dental hygiene and dental students (p<0.001) and perceived the fewest benefits of dental hygiene student peer teaching (p<0.001) before experiencing peer teaching. After experiencing dental hygiene student peer teaching, the dental students' perceptions of dental hygienists' roles, attitudes about clinical interactions with dental hygienists, and perceived benefits of dental hygiene student peer teachers improved and were more positive than the responses of their peers with no peer teaching experiences. These results suggest that dental hygiene student peer teaching may improve dental students' perceptions of dental hygienists' roles and attitudes about intraprofessional care.

An elicitation study of critical care nurses' salient hand hygiene beliefs.

PubMed

Piras, Susan E; Lauderdale, Jana; Minnick, Ann

2017-10-01

To describe critical care nurses' hand hygiene attitudinal, normative referent, and control beliefs. Hand hygiene is the primary strategy to prevent healthcare-associated infections. Social influence is an underdeveloped hand hygiene strategy. This qualitative descriptive study was conducted with 25 ICU nurses in the southeastern United States. Data were collected using the Nurses' Salient Belief Instrument. Thematic analysis generated four themes: Hand Hygiene is Protective; Nurses look to Nurses; Time-related Concerns; and Convenience is Essential. Nurses look to nurses as hand hygiene referents and believe hand hygiene is a protective behaviour that requires time and functional equipment. Copyright © 2017 Elsevier Ltd. All rights reserved.

Monitoring the inputs required to extend and sustain hygiene promotion: findings from the GLAAS 2013/2014 survey.

PubMed

Moreland, Leslie D; Gore, Fiona M; Andre, Nathalie; Cairncross, Sandy; Ensink, Jeroen H J

2016-08-01

There are significant gaps in information about the inputs required to effectively extend and sustain hygiene promotion activities to improve people's health outcomes through water, sanitation and hygiene (WASH) interventions. We sought to analyse current country and global trends in the use of key inputs required for effective and sustainable implementation of hygiene promotion to help guide hygiene promotion policy and decision-making after 2015. Data collected in response to the GLAAS 2013/2014 survey from 93 countries of 94 were included, and responses were analysed for 12 questions assessing the inputs and enabling environment for hygiene promotion under four thematic areas. Data were included and analysed from 20 External Support Agencies (ESA) of 23 collected through self-administered surveys. Firstly, the data showed a large variation in the way in which hygiene promotion is defined and what constitutes key activities in this area. Secondly, challenges to implement hygiene promotion are considerable: include poor implementation of policies and plans, weak coordination mechanisms, human resource limitations and a lack of available hygiene promotion budget data. Despite the proven benefits of hand washing with soap, a critical hygiene-related factor in minimising infection, GLAAS 2013/2014 survey data showed that hygiene promotion remains a neglected component of WASH. Additional research to identify the context-specific strategies and inputs required to enhance the effectiveness of hygiene promotion at scale are needed. Improved data collection methods are also necessary to advance the availability and reliability of hygiene-specific information. © 2016 John Wiley & Sons Ltd.

Sleep in the modern family: protective family routines for child and adolescent sleep

PubMed Central

Buxton, Orfeu M.; Chang, Anne-Marie; Spilsbury, James C.; Bos, Taylor; Emsellem, Helene; Knutson, Kristen L.

2015-01-01

Study objectives The overall objective of the 2014 National Sleep Foundation Sleep in America Poll “Sleep in the Modern Family” was to obtain a current picture of sleep in families with at least 1 school-aged child. Design Cross-sectional poll. Setting Internet-based interview. Participants Nationally representative Internet panel of US households with a child 6–17 years. Measurements and results Primary measures included parental perception of the importance of sleep, parental and child sleep quality, child sleep duration and habits, technology in bedroom, and family rules. Parents/guardians (n= 1103; mean age, 42; 54% female) completed the survey. Although the majority of parents endorsed the importance of sleep, 90% of children obtain less sleep than recommended. Significant predictors of age-adjusted sufficient sleep duration (estimated conservatively as ≥9 hours for ages 6–11 years and ≥8 hours for ages 12–17 years) included parent education, regular enforcement of rules about caffeine, and whether children left technology on in their bedroom overnight. Significant predictors of excellent sleep quality included whether a bedtime was always enforced and whether children left technology on overnight. Conclusions Children generally have better age-appropriate sleep in the presence of household rules and regular sleep-wake routines. Sufficient sleep quantity and adequate sleep quality were protected by well-established rules of sleep hygiene (limited caffeine and regular bedtime). In contrast, sleep deficiency was more likely to be present when parents and children had electronic devices on in the bedroom after bedtime. Public health intervention goals for sleep health might focus on reducing the encroachment of technology and media into time for sleep and supporting well-known sleep hygiene principles. PMID:26779564

The use of real-time feedback via wireless technology to improve hand hygiene compliance.

PubMed

Marra, Alexandre R; Sampaio Camargo, Thiago Zinsly; Magnus, Thyago Pereira; Blaya, Rosangela Pereira; Dos Santos, Gilson Batista; Guastelli, Luciana Reis; Rodrigues, Rodrigo Dias; Prado, Marcelo; Victor, Elivane da Silva; Bogossian, Humberto; Monte, Julio Cesar Martins; dos Santos, Oscar Fernando Pavão; Oyama, Carlos Kazume; Edmond, Michael B

2014-06-01

Hand hygiene (HH) is widely regarded as the most effective preventive measure for health care-associated infection. However, there is little robust evidence on the best interventions to improve HH compliance or whether a sustained increase in compliance can reduce rates of health care-associated infection. To evaluate the effectiveness of a real-time feedback to improve HH compliance in the inpatient setting, we used a quasiexperimental study comparing the effect of real-time feedback using wireless technology on compliance with HH. The study was conducted in two 20-bed step-down units at a private tertiary care hospital. Phase 1 was a 3-month baseline period in which HH counts were performed by electronic handwash counters. After a 1-month washout period, a 7-month intervention was performed in one step-down unit while the other unit served as a control. HH, as measured by dispensing episodes, was significantly higher in the intervention unit (90.1 vs 73.1 dispensing episodes/patient-day, respectively, P = .001). When the intervention unit was compared with itself before and after implementation of the wireless technology, there was also a significant increase in HH after implementation (74.5 vs 90.1 episodes/patient-day, respectively, P = .01). There was also an increase in mean alcohol-based handrub consumption between the 2 phases (68.9 vs 103.1 mL/patient-day, respectively, P = .04) in the intervention unit. We demonstrated an improvement in alcohol gel usage via implementation of real-time feedback via wireless technology. Copyright © 2014 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

Feasibility of a real-time hand hygiene notification machine learning system in outpatient clinics.

PubMed

Geilleit, R; Hen, Z Q; Chong, C Y; Loh, A P; Pang, N L; Peterson, G M; Ng, K C; Huis, A; de Korne, D F

2018-04-09

Various technologies have been developed to improve hand hygiene (HH) compliance in inpatient settings; however, little is known about the feasibility of machine learning technology for this purpose in outpatient clinics. To assess the effectiveness, user experiences, and costs of implementing a real-time HH notification machine learning system in outpatient clinics. In our mixed methods study, a multi-disciplinary team co-created an infrared guided sensor system to automatically notify clinicians to perform HH just before first patient contact. Notification technology effects were measured by comparing HH compliance at baseline (without notifications) with real-time auditory notifications that continued till HH was performed (intervention I) or notifications lasting 15 s (intervention II). User experiences were collected during daily briefings and semi-structured interviews. Costs of implementation of the system were calculated and compared to the current observational auditing programme. Average baseline HH performance before first patient contact was 53.8%. With real-time auditory notifications that continued till HH was performed, overall HH performance increased to 100% (P < 0.001). With auditory notifications of a maximum duration of 15 s, HH performance was 80.4% (P < 0.001). Users emphasized the relevance of real-time notification and contributed to technical feasibility improvements that were implemented in the prototype. Annual running costs for the machine learning system were estimated to be 46% lower than the observational auditing programme. Machine learning technology that enables real-time HH notification provides a promising cost-effective approach to both improving and monitoring HH, and deserves further development in outpatient settings. Copyright © 2018 The Healthcare Infection Society. Published by Elsevier Ltd. All rights reserved.

A Review of Electronic Hand Hygiene Monitoring: Considerations for Hospital Management in Data Collection, Healthcare Worker Supervision, and Patient Perception.

PubMed

McGuckin, Maryanne; Govednik, John

2015-01-01

Healthcare-associated infections (HAIs) in U.S. acute care hospitals lead to a burden of $96-$147 billion annually on the U.S. health system and affect 1 in 20 hospital patients (Marchetti & Rossiter, 2013). Hospital managers are charged with reducing and eliminating HAIs to cut costs and improve patient outcomes. Healthcare worker (HCW) hand hygiene (HH) practice is the most effective means of preventing the spread of HAIs, but compliance is at or below 50% (McGuckin, Waterman, & Govednik, 2009). For managers to increase the frequency of HCW HH occurrences and improve the quality of HH performance, companies have introduced electronic technologies to assist managers in training, supervising, and gathering data in the patient care setting. Although these technologies offer valuable feedback regarding compliance, little is known in terms of capabilities in the clinical setting. Less is known about HCW or patient attitudes if the system allows feedback to be shared. Early-adopting managers have begun to examine their experiences with HH technologies and publish their findings. We review peer-reviewed research on infection prevention that focused on the capabilities of these electronic systems, as well as the related research on HCW and patient interactions with electronic HH systems. Research suggests that these systems are capable of collecting data, but the results are mixed regarding their impact on HH compliance, reducing HAIs, or both and their costs. Research also indicates that HCWs and patients may not regard the technology as positively as industry or healthcare managers may have intended. When considering the adoption of electronic HH monitoring systems, hospital administrators should proceed with caution.

Skin reactions related to hand hygiene and selection of hand hygiene products.

PubMed

Larson, Elaine; Girard, Raphaelle; Pessoa-Silva, Carmem Lucia; Boyce, John; Donaldson, Liam; Pittet, Didier

2006-12-01

In October 2004, The World Health Organization (WHO) launched the World Alliance for Patient Safety. Within the alliance, the first priority of the Global Patient Safety Challenge is to reduce health care-associated infection. A key action within the challenge is to promote hand hygiene in health care globally as well as at the country level through the campaign "Clean Care is Safer Care." As a result, the WHO is developing Guidelines on Hand Hygiene in Health Care, designed to be applicable throughout the world. This paper summarizes one component of the global WHO guidelines related to the impact of hand hygiene on the skin of health care personnel, including a discussion of types of skin reactions associated with hand hygiene, methods to reduce adverse reactions, and factors to consider when selecting hand hygiene products. Health care professionals have a higher prevalence of skin irritation than seen in the general population because of the necessity for frequent hand hygiene during patient care. Ways to minimize adverse effects of hand hygiene include selecting less irritating products, using skin moisturizers, and modifying certain hand hygiene practices such as unnecessary washing. Institutions need to consider several factors when selecting hand hygiene products: dermal tolerance and aesthetic preferences of users as well as practical considerations such as convenience, storage, and costs.

The use of player physical and technical skill match activity profiles to predict position in the Australian Football League draft.

PubMed

Woods, Carl T; Veale, James P; Collier, Neil; Robertson, Sam

2017-02-01

This study investigated the extent to which position in the Australian Football League (AFL) national draft is associated with individual game performance metrics. Physical/technical skill performance metrics were collated from all participants in the 2014 national under 18 (U18) championships (18 games) drafted into the AFL (n = 65; 17.8 ± 0.5 y); 232 observations. Players were subdivided into draft position (ranked 1-65) and then draft round (1-4). Here, earlier draft selection (i.e., closer to 1) reflects a more desirable player. Microtechnology and a commercial provider facilitated the quantification of individual game performance metrics (n = 16). Linear mixed models were fitted to data, modelling the extent to which draft position was associated with these metrics. Draft position in the first/second round was negatively associated with "contested possessions" and "contested marks", respectively. Physical performance metrics were positively associated with draft position in these rounds. Correlations weakened for the third/fourth rounds. Contested possessions/marks were associated with an earlier draft selection. Physical performance metrics were associated with a later draft selection. Recruiters change the type of U18 player they draft as the selection pool reduces. juniors with contested skill appear prioritised.

Comments from the Developmental Neurotoxicology Committee of the Japanese Teratology Society on the OECD Guideline for the Testing of Chemicals, Proposal for a New Guideline 426, Developmental Neurotoxicity Study, Draft Document (October 2006 version), and on the Draft Document of the Retrospective Performance Assessment of the Draft Test Guideline 426 on Developmental Neurotoxicity.

PubMed

Ema, Makoto; Fukui, Yoshihiro; Aoyama, Hiroaki; Fujiwara, Michio; Fuji, Junichiro; Inouye, Minoru; Iwase, Takayuki; Kihara, Takahide; Oi, Akihide; Otani, Hiroki; Shinomiya, Mitsuhiro; Sugioka, Kozo; Yamano, Tsunekazu; Yamashita, Keisuke H; Tanimura, Takashi

2007-06-01

In October 2006, a new revision of the draft guideline (OECD Guideline for the Testing of Chemicals, Proposal for a New Guideline 426. Developmental Neurotoxicity Study) and Draft Document of the Retrospective Performance Assessment (RPA) of the Draft Test Guideline 426 on Developmental Neurotoxicity were distributed following incorporation of the results of the Expert Consultation Meeting in Tokyo on May 24-26, 2005. The draft guideline consists of 50 paragraphs and an appendix with 102 references; and the draft RPA consists of 37 paragraphs with 109 references. National coordinators were requested to arrange for national expert reviews of these draft documents in their member countries. Members of the Developmental Neurotoxicology (DNT) Committee of the Japanese Teratology Society (JTS) reviewed, discussed, and commented on the draft Test Guideline Proposal. The DNT Committee of the JTS also commented on the draft document of the RPA. These comments were sent to the OECD Secretariat. The DNT Committee of the JTS expects the comments to be useful for the finalization of these draft documents.

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.86 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Rulemaking § 51.86 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and any...

10 CFR 51.81 - Distribution of draft environmental impact statement.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Distribution of draft environmental impact statement. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.81 Distribution of draft environmental impact statement. Copies of the draft environmental impact statement and...

76 FR 57759 - Notice of Availability of Draft Resource Management Plan and Draft Environmental Impact Statement...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... Availability of Draft Resource Management Plan and Draft Environmental Impact Statement for the Kremmling Field... Management Act of 1976 (FLPMA), as amended, the Bureau of Land Management (BLM) has prepared a Draft Resource... alternatives for future [[Page 57760

ENVIRONMENTAL TECHNOLOGY VERIFICATION: JOINT (NSF-EPA) VERIFICATION STATEMENT AND REPORT FOR THE REMOVAL OF MERCURY FROM DENTAL OFFICE WASTEWATER, DENTAL RECYCLING OF NORTH AMERICA (DRNA) MERCURY REMOVAL UNIT (MRU). - NSF 02/01/EPAWQPC-SWP

EPA Science Inventory

Verification testing of the Dental Recycling North America (DRNA) Mercury Removal Unit (MRU) was conducted over a seven week period, at a dental office in Michigan that had three operatory rooms and two hygiene rooms. The office operated four days per week and averaged approxiam...

Telepressure and College Student Employment: The Costs of Staying Connected Across Social Contexts.

PubMed

Barber, Larissa K; Santuzzi, Alecia M

2017-02-01

Telepressure is a psychological state consisting of the preoccupation and urge to respond quickly to message-based communications from others. Telepressure has been linked with negative stress and health outcomes, but the existing measure focuses on experiences specific to the workplace. The current study explores whether an adapted version of the workplace telepressure measure is relevant to general social interactions that rely on information and communication technologies. We validated a general telepressure measure in a sample of college students and found psychometric properties similar to the original workplace measure. Also, general telepressure was related to, but distinct from, the fear of missing out, self-control and technology use. Using a predictive validity design, we also found that telepressure at the beginning of the semester was related to student reports of burnout, perceived stress and poor sleep hygiene 1 month later (but not work-life balance or general life satisfaction). Moreover, telepressure was more strongly related to more negative outcomes (burnout, stress and poor sleep hygiene) and less positive outcomes (work-life balance and life satisfaction) among employed compared with non-employed students. Thus, the costs of staying connected to one's social network may be more detrimental to college students with additional employment obligations. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Quantifying health improvements from water quantity enhancement: an engineering perspective applied to rainwater harvesting in West Africa.

PubMed

Fry, Lauren M; Cowden, Joshua R; Watkins, David W; Clasen, Thomas; Mihelcic, James R

2010-12-15

Knowledge of potential benefits resulting from technological interventions informs decision making and planning of water, sanitation, and hygiene programs. The public health field has built a body of literature showing health benefits from improvements in water quality. However, the connection between improvements in water quantity and health is not well documented. Understanding the connection between technological interventions and water use provides insight into this problem. We present a model predicting reductions in diarrhea disease burden when the water demands from hygiene and sanitation improvements are met by domestic rainwater harvesting (DRWH). The model is applied in a case study of 37 West African cities. For all cities, with a total population of over 10 million, we estimate that DRWH with 400 L storage capacity could result in a 9% reduction in disability-affected life years (DALYs). If DRWH is combined with point of use (POU) treatment, this potential impact is nearly doubled, to a 16% reduction in DALYs. Seasonal variability of diarrheal incidence may have a small to moderate effect on the effectiveness of DRWH, depending on the storage volume used. Similar predictions could be made for other interventions that improve water quantity in other locations where disease burden from diarrhea is known.

Impact of the International Nosocomial Infection Control Consortium (INICC) Multidimensional Hand Hygiene Approach, over 8 years, in 11 cities of Turkey

PubMed Central

Leblebicioglu, Hakan; Koksal, Iftihar; Akan, Özay Arıkan; Özgültekin, Asu; Kendirli, Tanil; Erben, Nurettin; Yalcin, Ata Nevzat; Ulusoy, Sercan; Sirmatel, Fatma; Ozdemir, Davut; Alp, Emine; Yıldızdaş, Dinçer; Esen, Saban; Ulger, Fatma; Dilek, Ahmet; Yilmaz, Hava; Yýlmaz, Gürdal; Kaya, Selçuk; Ulusoy, Hülya; Tulunay, Melek; Oral, Mehmet; Ünal, Necmettin; Turan, Güldem; Akgün, Nur; İnan, Asuman; Ince, Erdal; Karbuz, Adem; Çiftçi, Ergin; Taşyapar, Nevin; Güneş, Melek; Ozgunes, Ilhan; Usluer, Gaye; Turhan, Ozge; Gunay, Nurgul; Gumus, Eylul; Dursun, Oguz; Arda, Bilgin; Bacakoglu, Feza; Cengiz, Mustafa; Yilmaz, Leyla; Geyik, Mehmet Faruk; Şahin, Ahmet; Erdogan, Selvi; Kılıc, Aysegul Ulu; Horoz, Ozden Ozgur

2014-01-01

Aims: To evaluate the effectiveness of the International Nosocomial Infection Control Consortium (INICC) Multidimensional Hand Hygiene Approach in Turkey and analyse predictors of poor hand hygiene compliance. Design: An observational, prospective, interventional, before-and-after study was conducted from August 2003 to August 2011 in 12 intensive care units (ICU) of 12 hospitals in 11 cities. The study was divided into a baseline and a follow-up period and included random 30-minute observations for hand hygiene compliance in ICU. The hand hygiene approach included administrative support, supplies availability, education and training, reminders in the workplace, process surveillance, and performance feedback. Results: We observed 21,145 opportunities for hand hygiene. Overall hand hygiene compliance increased from 28.8% to 91% (95% CI 87.6–93.0, p 0.0001). Multivariate and univariate analyses showed that several variables were significantly associated with poor hand hygiene compliance: males vs. females (39% vs. 48%; 95% CI 0.79–0.84, p 0.0001), ancillary staff vs. physicians (35% vs. 46%, 95% CI 0.73–0.78, p 0.0001), and adult vs. pediatric ICUs (42% vs. 74%, 95% CI 0.54–0.60, p 0.0001). Conclusions: Adherence to hand hygiene was significantly increased with the INICC Hand Hygiene Approach. Specific programmes should be directed to improve hand hygiene in variables found to be predictors of poor hand hygiene compliance. PMID:28989420

An educational intervention to improve hand hygiene compliance in Vietnam.

PubMed

Phan, Hang Thi; Tran, Hang Thi Thuy; Tran, Hanh Thi My; Dinh, Anh Pham Phuong; Ngo, Ha Thanh; Theorell-Haglow, Jenny; Gordon, Christopher J

2018-03-07

Hand hygiene compliance is the basis of infection control programs. In developing countries models to improve hand hygiene compliance to reduce healthcare acquired infections are required. The aim of this study was to determine hand hygiene compliance following an educational program in an obstetric and gynecological hospital in Vietnam. Health care workers from neonatal intensive care, delivery suite and a surgical ward from Hung Vuong Hospital, Ho Chi Minh City, Vietnam undertook a 4-h educational program targeting hand hygiene. Compliance was monitored monthly for six months following the intervention. Hand hygiene knowledge was assessed at baseline and after six months of the study. There were 7124 opportunities over 370 hand hygiene recording sessions with 1531 opportunities at baseline and 1620 at 6 months following the intervention. Hand hygiene compliance increased significantly from baseline across all sites (43.6% [95% Confidence interval CI: 41.1-46.1] to 63% [95% CI: 60.6-65.3]; p < 0.0001). Health care worker hand hygiene compliance increased significantly after intervention (p < 0.0001). There were significant improvements in knowledge scores from baseline to 2 months post educational intervention with mean difference standard deviations (SD): 1.5 (2.5); p < 0.001). A simple educational model was implemented in a Vietnamese hospital that revealed good hand hygiene compliance for an extended period of time. Hand hygiene knowledge increased during the intervention. This hand hygiene model could be used in developing countries were resources are limited.

Comparative study of presurgical hand hygiene with hydroalcoholic solution versus traditional presurgical hand hygiene.

PubMed

López Martín, M Beatriz; Erice Calvo-Sotelo, Alejo

To compare presurgical hand hygiene with hydroalcoholic solution following the WHO protocol with traditional presurgical hand hygiene. Cultures of the hands of surgeons and surgical nurses were performed before and after presurgical hand hygiene and after removing gloves at the end of surgery. Cultures were done in 2different days: the first day after traditional presurgical hand hygiene, and the second day after presurgical hand hygiene with hydroalcoholic solution following the WHO protocol. The duration of the traditional hand hygiene was measured and compared with the duration (3min) of the WHO protocol. The cost of the products used in the traditional technique was compared with the cost of the hydroalcoholic solution used. The variability of the traditional technique was determined by observation. Following presurgical hand hygiene with hydroalcoholic solution, colony-forming units (CFU) were detected in 5 (7.3%) subjects, whereas after traditional presurgical hand hygiene CFU were detected in 14 subjects (20.5%) (p < 0.05). After glove removal, the numbers of CFU were similar. The time employed in hand hygiene with hydroalcoholic solution (3min) was inferior to the time employed in the traditional technique (p < 0.05), its cost was less than half, and there was no variability. Compared with other techniques, presurgical hand hygiene with hydroalcoholic solution significantly decreases CFU, has similar latency time, a lower cost, and saves time. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

Computer Assisted Drafting (CNC) Drawings. Drafting Module 6. Instructor's Guide.

ERIC Educational Resources Information Center

Missouri Univ., Columbia. Instructional Materials Lab.

This Missouri Vocational Instruction Management System instructor's drafting guide has been keyed to the drafting competency profile developed by state industry and education professionals. This unit contains information on computer-assisted drafting drawings. The guide contains a cross-reference table of instructional materials and 20 worksheets.…

49 CFR 229.61 - Draft system.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Draft system. 229.61 Section 229.61 Transportation... TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Draft System § 229.61 Draft system. (a) A... absorbed by friction devices or draft gears that exceeds one-half inches. (5) A broken or cracked coupler...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 2 2013-01-01 2013-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 2 2012-01-01 2012-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 2 2011-01-01 2011-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

49 CFR 229.61 - Draft system.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Draft system. 229.61 Section 229.61 Transportation... TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Draft System § 229.61 Draft system. (a) A... absorbed by friction devices or draft gears that exceeds one-half inches. (5) A broken or cracked coupler...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 4 2011-10-01 2011-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 2 2014-01-01 2014-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

49 CFR 230.92 - Draw gear and draft systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 4 2012-10-01 2012-10-01 false Draw gear and draft systems. 230.92 Section 230.92 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION... Tenders Draw Gear and Draft Systems § 230.92 Draw gear and draft systems. Couplers, draft gear and...

49 CFR 229.61 - Draft system.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Draft system. 229.61 Section 229.61 Transportation... TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Draft System § 229.61 Draft system. (a) A... absorbed by friction devices or draft gears that exceeds one-half inches. (5) A broken or cracked coupler...

77 FR 46518 - Draft Resource Management Plan/General Plan Draft Environmental Impact Statement/Revised Draft...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-03

... DEPARTMENT OF THE INTERIOR Bureau of Reclamation Draft Resource Management Plan/General Plan Draft... Recreation Area, Merced County, California AGENCY: Bureau of Reclamation, Interior. ACTION: Notice of... California Department of Parks and Recreation was given the responsibility to plan, design, construct...

IRIS Toxicological Review of Ammonia (Revised External Review Draft)

EPA Science Inventory

In August 2013, EPA submitted a revised draft IRIS assessment of ammonia to the agency's Science Advisory Board (SAB) and posted this draft on the IRIS website. EPA had previously released a draft of the assessment for public comment, held a public meeting about the draft, and ...

CURRENT PRACTICES OBSERVED IN DESIGN AND DRAFTING OCCUPATIONS.

ERIC Educational Resources Information Center

SQUIRES, CARL E.

DATA WHICH HAD SIGNIFICANCE FOR DESIGN AND DRAFTING CURRICULUMS WERE COLLECTED BY DIRECT OBSERVATION OF 21 DESIGN AND DRAFTING FACTORS WITHIN 16 SELECTED INDUSTRIAL COMPANIES EMPLOYING 869 DESIGNERS AND DRAFTSMEN. OBSERVATIONS COVERED (1) THE NUMBER OF DESIGN AND DRAFTING EMPLOYEES, (2) THE SYSTEM OF DRAFTING ROOM ORGANIZATION, (3) JOB…

10 CFR 51.80 - Draft environmental impact statement-materials license.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Draft environmental impact statement-materials license. 51...-Regulations Implementing Section 102(2) Draft Environmental Impact Statements-Materials Licenses § 51.80 Draft environmental impact statement—materials license. (a) The NRC staff will either prepare a draft environmental...

Menstrual Hygiene Practices and Sources of Menstrual Hygiene Information among Adolescent Secondary School Girls in Abakaliki Education Zone of Ebonyi State

ERIC Educational Resources Information Center

Ilo, Cajetan I.; Nwimo, Ignatius O.; Onwunaka, Chinagorom

2016-01-01

Menstruation is clouded by socio-cultural restrictions resulting in adolescent girls remaining ignorant of hygienic practices. The study was designed to ascertain the menstrual hygiene practices and sources of menstrual hygiene information among 1200 adolescent secondary school girls, who completed the questionnaire designed for the study. Out of…