Science.gov

Sample records for iaea regional technical

  1. Hybrid imaging worldwide-challenges and opportunities for the developing world: a report of a Technical Meeting organized by IAEA.

    PubMed

    Kashyap, Ravi; Dondi, Maurizio; Paez, Diana; Mariani, Guliano

    2013-05-01

    The growth in nuclear medicine, in the past decade, is largely due to hybrid imaging, specifically single-photon emission tomography-computed tomography (SPECT-CT) and positron emission tomography-computed tomography (PET-CT). Introduction and use of hybrid imaging has been growing at a fast pace. This has led to many challenges and opportunities to the personnel dealing with it. The International Atomic Energy Agency (IAEA) keeps a close watch on the trends in applications of nuclear techniques in health by many ways, including obtaining inputs from member states and professional societies. In 2012, a Technical Meeting on trends in hybrid imaging was organized by IAEA to understand the current status and trends of hybrid imaging using nuclear techniques, its role in clinical practice, and associated educational needs and challenges. Perspective of scientific societies and professionals from all the regions of the world was obtained. Heterogeneity in value, educational needs, and access was noted and the drivers of this heterogeneity were discussed. This article presents the key points shared during the technical meeting, focusing primarily on SPECT-CT and PET-CT, and shares the action plan for IAEA to deal with heterogeneity as suggested by the participants.

  2. Hybrid imaging worldwide-challenges and opportunities for the developing world: a report of a Technical Meeting organized by IAEA.

    PubMed

    Kashyap, Ravi; Dondi, Maurizio; Paez, Diana; Mariani, Guliano

    2013-05-01

    The growth in nuclear medicine, in the past decade, is largely due to hybrid imaging, specifically single-photon emission tomography-computed tomography (SPECT-CT) and positron emission tomography-computed tomography (PET-CT). Introduction and use of hybrid imaging has been growing at a fast pace. This has led to many challenges and opportunities to the personnel dealing with it. The International Atomic Energy Agency (IAEA) keeps a close watch on the trends in applications of nuclear techniques in health by many ways, including obtaining inputs from member states and professional societies. In 2012, a Technical Meeting on trends in hybrid imaging was organized by IAEA to understand the current status and trends of hybrid imaging using nuclear techniques, its role in clinical practice, and associated educational needs and challenges. Perspective of scientific societies and professionals from all the regions of the world was obtained. Heterogeneity in value, educational needs, and access was noted and the drivers of this heterogeneity were discussed. This article presents the key points shared during the technical meeting, focusing primarily on SPECT-CT and PET-CT, and shares the action plan for IAEA to deal with heterogeneity as suggested by the participants. PMID:23561459

  3. The evolution and impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in the Latin American region.

    PubMed

    Morales Pedraza, Jorge; Phillips, Glyn O

    2009-05-01

    Since 1993, the IAEA supported the establishment or the consolidation of seven tissue banks in the region. As a direct or indirect consequence of the implementation of the IAEA program, more than 53 tissue banks are now operating in the participating countries. The fast development of tissue banks in the Latin America region under the ARCAL Agreement and with the financial and technical support of the IAEA program made it necessary to train new tissue bank operators and medical personnel. In general, 90 tissue bank operators and medical personnel were trained in the training centre of Buenos Aires. Another six tissue bank operators and medical personnel were trained in the International Training Centre of Singapore. The main impact of the IAEA program in the region was the following: the establishment or consolidation of fifty-three tissue banks in nine countries in the region; the implementation of five national projects, allocating $1,006,737 dollars for this purpose and of one regional project allocating $284,741 dollars for this purpose; the use of the IAEA Standards, the IAEA Code of Practice and the IAEA Public Awareness Strategies in several tissue banks in the region; the application of quality control and quality assurances manuals in all of the participating countries.

  4. United States Program for Technical assistance to IAEA Standards. Concept Paper: Knowledge Acquisition, Skills training for enhanced IAEA safeguards inspections

    SciTech Connect

    Morris, F.A.; Toquam, J.L.

    1993-11-01

    This concept paper explores the potential contribution of ``Knowledge Acquisition Skills`` in enhancing the effectiveness of international safeguards inspections by the International Atomic energy Agency (IAEA, or Agency) and identifies types of training that could be provided to develop or improve such skills. For purposes of this concept paper, Knowledge Acquisition Skills are defined broadly to include all appropriate techniques that IAEA safeguards inspectors can use to acquire and analyze information relevant to the performance of successful safeguards inspections. These techniques include a range of cognitive, analytic, judgmental, interpersonal, and communications skills that have the potential to help IAEA safeguards inspectors function more effectively.

  5. PREFACE: Third IAEA Technical Meeting on ECRH Physics and Technology in ITER

    NASA Astrophysics Data System (ADS)

    Cirant, S.

    2005-01-01

    This meeting belongs to a series of topical events which the International Atomic Energy Agency (IAEA, Vienna) organizes in a regular basis on crucial aspects of nuclear fusion research, or related in particular to ITER physics or a technological application relevant to the nuclear fusion reactor. Each Technical Meeting series has a specific object; the events are called on a two-three years basis and are recommended by the IAEA advisory body for Fusion, the International Fusion Research Council (IFRC) . The object of the IAEA-TM held in Como, Italy, 2-5 May 2005, was the application in ITER of powerful Electron Cyclotron waves in the millimeter wave frequency range for plasma Heating and noninductive Current Drive. The meeting was the third on this subject. There were 42 presentations to an audience of about 60 delegates from 16 countries. The main goal of this series of IAEA-TM is to bring together specialists of the different branches involved in the project, in the effort of the best understanding of the limits and capabilities of each one of the different fields of research and development. Millimeter-wave source developers, millimeter-wave system designers and plasma physicists, theoreticians and experimentalists in all of the fields, exposed their way of addressing the problem in plenary sessions attended by all participants. Discussions on the different topics of gyrotron development, launcher options and physics application were continued in forums following the presentations. The specialist reader will find in this volume in particular the latest developments concerning the frequency, the output power and the efficiency of the gyrotrons which are now being considered the preferred type of high power millimeter wave generators for ECH/ECCD applications in the fusion reactor. The debate on the launcher of the EC waves, in the form of Gaussian beams, is presently very active, with a few options on the table to be merged in one optimized and integrated design

  6. US technical assistance to the IAEA and the chemical weapons convection (CWC) - a review and look to the future

    SciTech Connect

    Indusi, J.; Parsick, R.J.; Reisman, A.W.

    1997-08-01

    This paper reviews the Safeguards mandate of the International Atomic Energy Agency (IAEA) and describes U.S. technical support programs. We also review the mandate of the Chemical Weapons Convention (CWC) and speculate on the technical areas where U.S. assistance may prove useful. The IAEA was organized in 1957 in response to President Eisenhower`s {open_quotes}Atoms for Peace{close_quotes} initiative presented to the UN General Assembly on December 8, 1953. The Organization for the Prohibition of Chemical Weapons (OPCW) has been organized by a Preparatory Commission (PREPCOM) to prepare for the entry-into-force of this new convention which prohibits the development, production, stockpiling and use of chemical weapons and on their destruction. The safeguards mandate of the IAEA is to carry out verifications of nuclear material pursuant to the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) and other voluntary but legally binding agreements. U.S. technical support programs have provided and continue to provide assistance in the form of Cost-Free Experts (CFE`s), systems studies on new safeguards approaches, training, computerized information systems, and equipment for nuclear materials measurements and containment and surveillance systems. Because the CWC just recently entered into force (April 29, 1997), verification procedures of the OPCW are not yet fully developed. However, it is expected, and can already be seen for many aspects of the technical task, that there are many similarities between the verification activities of the OPCW and those carried out by the IAEA. This paper will discuss potential technical support areas that can help strengthen the OPCW. 9 refs.

  7. REGIONAL MANUFACTURING TECHNICAL DEVELOPMENT

    SciTech Connect

    EASON, H.A.

    1997-02-21

    This project covers four CRADAS (Cooperative Research and Development Agreements) which were initiated in 1991 and 1993. The two CRADAS with the state of Tennessee and the state of Florida were to provide technical assistance to small manufacturers in those states and the CRADA with the Tennessee Technology Foundation was to engage in joint economic development activities within the state. These three CRADAS do not fit the traditional definition of CRADAS and would be administered by other agreement mechanisms, today. But in these early days of technology transfer efforts, the CRADA mechanism was already developed and usable. The CRADA with Coors Ceramics is a good example of a CRADA and was used to develop nondestructive testing technology for ceramic component inspection. The report describes the background of this project, its economic impact, and its benefits to the U. S. Department of Energy.

  8. 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems

    SciTech Connect

    Berk, Herbert L.; Breizman, Boris N.

    2014-02-21

    The 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems took place in Austin, Texas (7–11 September 2011). This meeting was organized jointly with the 5th IAEA Technical Meeting on Theory of Plasma Instabilities (5–7 September 2011). The two meetings shared one day (7 September 2011) with presentations relevant to both groups. Some of the work reported at these meetings was then published in a special issue of Nuclear Fusion [Nucl. Fusion 52 (2012)]. Summaries of the Energetic Particle Conference presentations were given by Kazuo Toi and Boris Breizman. They respectively discussed the experimental and theoretical progress presented at the meeting. Highlights of this meeting include the tremendous progress that has been achieved in the development of diagnostics that enables the ‘viewing’ of internal fluctuations and allows comparison with theoretical predictions, as demonstrated, for example, in the talks of P. Lauber and M. Osakabe. The need and development of hardened diagnostics in the severe radiation environment, such as those that will exist in ITER, was discussed in the talks of V. Kiptily and V.A. Kazakhov. In theoretical studies, much of the effort is focused on nonlinear phenomena. For example, detailed comparison of theory and experiment on D-III-D on the n = 0 geodesic mode was reported in separate papers by R. Nazikian and G. Fu. A large number of theoretical papers were presented on wave chirping including a paper by B.N. Breizman, which notes that wave chirping from a single frequency may emanate continuously once marginal stability conditions have been established. Another area of wide interest was the detailed study of alpha orbits in a burning plasma, where losses can come from symmetry breaking due to finite coil number or magnetic field imperfections introduced by diagnostic or test modules. An important area of development, covered by M.A. Hole and D.A. Spong, is concerned with the self

  9. The IAEA technical cooperation programme and nuclear medicine in the developing world: objectives, trends, and contributions.

    PubMed

    Casas-Zamora, Juan Antonio; Kashyap, Ridhi

    2013-05-01

    The International Atomic Energy Agency's technical cooperation (TC) programme helps Member States in the developing world with limited infrastructure and human resource capacity to harness the potential of nuclear technologies in meeting socioeconomic development challenges. As a part of its human health TC initiatives, the Agency, through the TC mechanism, has the unique role of promoting nuclear medicine applications of fellowships, scientific visits, and training courses, via technology procurement, and in the past decade has contributed nearly $54 million through 180 projects in supporting technology procurement and human resource capacity development among Member States from the developing world (low- and middle-income countries). There has been a growing demand in nuclear medicine TC, particularly in Africa and ex-Soviet Union States where limited infrastructure presently exists, based on cancer and cardiovascular disease management projects. African Member States received the greatest allocation of TC funds in the past 10 years dedicated to building new or rehabilitating obsolete nuclear medicine infrastructure through procurement support of single-photon emission computed tomography machines. Agency support in Asia and Latin America has emphasized human resource capacity building, as Member States in these regions have already acquired positron emission tomography and hybrid modalities (positron emission tomography/computed tomography and single-photon emission computed tomography/computed tomography) in their health systems. The strengthening of national nuclear medicine capacities among Member States across different regions has enabled stronger regional cooperation among developing countries who through the Agency's support and within the framework of regional cooperative agreements are sharing expertise and fostering the sustainability and productive integration of nuclear medicine within their health systems.

  10. PREFACE: 11th IAEA Technical Meeting on H-mode Physics and Transport Barriers

    NASA Astrophysics Data System (ADS)

    Takizuka, Tomonori

    2008-07-01

    This volume of Journal of Physics: Conference Series contains papers based on invited talks and contributed posters presented at the 11th IAEA Technical Meeting on H-mode Physics and Transport Barriers. This meeting was held at the Tsukuba International Congress Center in Tsukuba, Japan, on 26-28 September 2007, and was organized jointly by the Japan Atomic Energy Agency and the University of Tsukuba. The previous ten meetings in this series were held in San Diego (USA) 1987, Gut Ising (Germany) 1989, Abingdon (UK) 1991, Naka (Japan) 1993, Princeton (USA) 1995, Kloster Seeon (Germany) 1997, Oxford (UK) 1999, Toki (Japan) 2001, San Diego (USA) 2003, and St Petersburg (Russia) 2005. The purpose of the eleventh meeting was to present and discuss new results on H-mode (edge transport barrier, ETB) and internal transport barrier, ITB, experiments, theory and modeling in magnetic fusion research. It was expected that contributions give new and improved insights into the physics mechanisms behind high confinement modes of H-mode and ITBs. Ultimately, this research should lead to improved projections for ITER. As has been the tradition at the recent meetings of this series, the program was subdivided into six topics. The topics selected for the eleventh meeting were: H-mode transition and the pedestal-width Dynamics in ETB: ELM threshold, non-linear evolution and suppression, etc Transport relations of various quantities including turbulence in plasmas with ITB: rotation physics is especially highlighted Transport barriers in non-axisymmetric magnetic fields Theory and simulation on transport barriers Projections of transport barrier physics to ITER For each topic there was an invited talk presenting an overview of the topic, based on contributions to the meeting and on recently published external results. The six invited talks were: A Leonard (GA, USA): Progress in characterization of the H-mode pedestal and L-H transition N Oyama (JAEA, Japan): Progress and issues in

  11. The evolution and impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Asia and the Pacific region.

    PubMed

    Morales Pedraza, Jorge; Phillips, Glyn O

    2009-05-01

    The Asia and the Pacific region was within the IAEA program on radiation and tissue banking, the most active region. Most of the tissue banks in the Asia and the Pacific region were developed during the late 1980s and 1990s. The initial number of tissue banks established or supported by the IAEA program in the framework of the RCA Agreement for Asia and the Pacific region was 18. At the end of 2006, the number of tissue banks participating, in one way or another in the IAEA program was 59. Since the beginning of the implementation of the IAEA program in Asia and the Pacific region 63,537 amnion and 44,282 bone allografts were produced and 57,683 amnion and 36,388 bone allografts were used. The main impact of the IAEA program in the region was the following: the establishment or consolidation of at least 59 tissue banks in 15 countries in the region (the IAEA supported directly 16 of these banks); the improvement on the quality and safety of tissues procured and produced in the region reaching international standards; the implementation of eight national projects, two regional projects and two interregional projects; the elaboration of International Standards, a Code of Practice and a Public Awareness Strategies and, the application of quality control and quality assurances programs in all participating tissue banks.

  12. Sections prepared for inclusion in an IAEA technical document handbook on Designing and Implementing a Physical Protection System

    SciTech Connect

    Snell, Mark K.

    2015-11-01

    Two major sections were drafted (each with several subsections) for the IAEA dealing with designing and implementing a Physical Protection System (PPS). Areas addressed were Search Systems and the evaluation of PPS effectiveness.

  13. The Regional Structure of Technical Innovation

    NASA Astrophysics Data System (ADS)

    O'Neale, Dion

    2014-03-01

    There is strong evidence that the productivity per capita of cities and regions increases with population. One likely explanation for this phenomenon is that densely populated regions bring together otherwise unlikely combinations of individuals and organisations with diverse, specialised capabilities, leading to increased innovation and productivity. We have used the REGPAT patent database to construct a bipartite network of geographic regions and the patent classes for which those regions display a revealed comparative advantage. By analysing this network, we can infer relationships between different types of patent classes - and hence the structure of (patentable) technology. The network also provides a novel perspective for studying the combinations of technical capabilities in different geographic regions. We investigate measures such as the diversity and ubiquity of innovations within regions and find that diversity (resp. ubiquity) is positively (resp. negatively) correlated with population. We also find evidence of a nested structure for technical innovation. That is, specialised innovations tend to occur only when other more general innovations are already present.

  14. Southwest Region Experiment Station - Final Technical Report

    SciTech Connect

    Rosenthal, A

    2011-08-19

    Southwest Technology Development Institute (SWTDI), an independent, university-based research institute, has been the operator of the Southwest Region Photovoltaic Experiment Station (SWRES) for almost 30 years. The overarching mission of SWTDI is to position PV systems and solar technologies to become cost-effective, major sources of energy for the United States. Embedded in SWTDI's general mission has been the more-focused mission of the SWRES: to provide value added technical support to the DOE Solar Energy Technologies Program (SETP) to effectively and efficiently meet the R&D needs and targets specified in the SETP Multi-Year Technical Plan. : The DOE/SETP goals of growing U.S. PV manufacturing into giga-watt capacities and seeing tera-watt-hours of solar energy production in the U.S. require an infrastructure that is under development. The staff of the SWRES has supported DOE/SETP through a coherent, integrated program to address infrastructural needs inhibiting wide-scale PV deployment in three major technical categories: specialized engineering services, workforce development, and deployment facilitation. The SWRES contract underwent three major revisions during its five year period-of- performance, but all tasks and deliverables fell within the following task areas: Task 1: PV Systems Assistance Center 1. Develop a Comprehensive multi-year plan 2. Provide technical workforce development materials and workshops for PV stakeholder groups including university, professional installers, inspectors, state energy offices, Federal agencies 3. Serve on the NABCEP exam committee 4. Provide on-demand technical PV system design reviews for U.S. PV stakeholders 5. Provide PV system field testing and instrumentation, technical outreach (including extensive support for the DOE Market Transformation program) Task 2: Design-for-Manufacture PV Systems 1. Develop and install 18 kW parking carport (cost share) and PV-thermal carport (Albuquerque) deriving and publishing

  15. International Workshops to Foster Implementation of the IAEA Additional Protocol

    SciTech Connect

    Killinger, Mark H.; Coates, Cameron W.; Bedke, Michael L.

    2003-07-14

    A country’s adherence to the International Atomic Energy Agency’s (IAEA) Additional Protocol is an important statement to the world of that country’s commitment to nuclear nonproliferation. Without the Additional Protocol (AP) it is possible, as demonstrated in Iraq, for a country party to the Non-Proliferation Treaty (NPT) to clandestinely work toward nuclear weapons and be undetected by the IAEA. This is because classical safeguards under the NPT are directed at diversion of nuclear material from declared activities. But a country may instead build undeclared activities to produce weapons-grade nuclear material. The AP is directed at detecting those undeclared activities. As of May 2003, 73 countries had signed the AP, but only 35 have entered into force. To further adherence to the AP, the IAEA has held regional, high-level seminars in Japan, South Africa, Kazakhstan, Peru, Romania, and Malaysia to explain AP provisions. To supplement these policy-level seminars, the U.S. Department of Energy (DOE) has undertaken to develop a set of modules of technical competencies required to implement the AP. The intent is to work closely with the IAEA by providing these technical competencies to countries as well as to complement the IAEA’s regional seminars and other outreach efforts. This paper briefly describes the technical competency modules.

  16. IAEA support to medical physics in nuclear medicine.

    PubMed

    Meghzifene, Ahmed; Sgouros, George

    2013-05-01

    priority for healthcare providers in many countries. The IAEA's response to meet the increasing needs for training has been 2-folds. Through its regular program, a priority is given to the development of standardized syllabi and education and clinical training guides. Through its technical cooperation programme, support is given for setting up national medical physics education and clinical training programs in countries. In addition, fellowships are granted for professionals working in the field for specialized training, and workshops are organized at the national and regional level in specialized topics of nuclear medicine physics. So as to support on-the-job training, the IAEA has also setup a gamma camera laboratory in Seibersdorf, Austria. The laboratory is also equipped with QC tools and equipments, and radioisotopes are procured when training events are held. About 2-3 specialized courses are held every year for medical physicists at the IAEA gamma camera laboratory. In the area of research and development, the IAEA supports, through its coordinated research projects, new initiatives in quantitative nuclear medicine and internal dosimetry. The future of nuclear medicine is driven by advances in instrumentation, by the ever increasing availability of computing power and data storage, and by the development of new radiopharmaceuticals for molecular imaging and therapy. Future developments in nuclear medicine are partially driven by, and will influence, nuclear medicine physics and medical physics. To summarize, the IAEA has established a number of programs to support nuclear medicine physics and will continue to do so through its coordinated research activities, education and training in clinical medical physics, and through programs and meetings to promote standardization and harmonization of QA or QC procedures for imaging and treatment of patients.

  17. IAEA TECDOC 055 Outline

    SciTech Connect

    Shull, Doug

    2015-07-13

    An outline of suggestions for updating a version of IAEA-TECDOC-1276 is provided. This update will become IAEA-TECDOC-055, titled ''IAEA handbook for designing and implementing physical protection systems for nuclear material and nuclear facilities.''

  18. Lake states regional forest resources assessments: Technical papers. Forest Service general technical report

    SciTech Connect

    Webster, H.H.; Vasievich, J.M.

    1997-07-23

    Contains 21 technical working papers prepared for the Lake States regional forest resources assessment, Lake States Forestry Alliance 1995. They represent significant contributions from many individuals and organizations and form the technical background for the Assessment.

  19. EDITORIAL: Special issue containing papers presented at the 11th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems Special issue containing papers presented at the 11th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems

    NASA Astrophysics Data System (ADS)

    Kolesnichenko, Ya.

    2010-08-01

    The history of fusion research resembles the way in which one builds skyscrapers: laying the first foundation stone, one thinks about the top of the skyscraper. At the early stages of fusion, when it became clear that the thermonuclear reactor would operate with DT plasma confined by the magnetic field, the study of the `top item'—the physics of 3.5 MeV alpha particles produced by the DT fusion reaction—was initiated. The first publications on this topic appeared as long ago as the 1960s. At that time, because the physics of alpha particles was far from the experimental demand, investigations were carried out by small groups of theoreticians who hoped to discover important and interesting phenomena in this new research area. Soon after the beginning of the work, theoreticians discovered that alpha particles could excite various instabilities in fusion plasmas. In particular, at the end of the 1960s an Alfvén instability driven by alpha particles was predicted. Later it turned out that a variety of Alfvén instabilities with very different features does exist. Instabilities with perturbations of the Alfvénic type play an important role in current experiments; it is likely that they will affect plasma performance in ITER and future reactors. The first experimental manifestation of instabilities excited by superthermal particles in fusion devices was observed in the PDX tokamak in 1983. In this device a large-scale instability—the so called `fishbone instability'—associated with ions produced by the neutral beam injection resulted in a loss of a large fraction of the injected energy. Since then, the study of energetic-ion-driven instabilities and the effects produced by energetic ions in fusion plasmas has attracted the growing attention of both experimentalists and theorists. Recognizing the importance of this topic, the first conference on fusion alpha particles was held in 1989 in Kyiv under the auspices of the IAEA. The meeting in Kyiv and several

  20. IAEA safeguards and classified materials

    SciTech Connect

    Pilat, J.F.; Eccleston, G.W.; Fearey, B.L.; Nicholas, N.J.; Tape, J.W.; Kratzer, M.

    1997-11-01

    The international community in the post-Cold War period has suggested that the International Atomic Energy Agency (IAEA) utilize its expertise in support of the arms control and disarmament process in unprecedented ways. The pledges of the US and Russian presidents to place excess defense materials, some of which are classified, under some type of international inspections raises the prospect of using IAEA safeguards approaches for monitoring classified materials. A traditional safeguards approach, based on nuclear material accountancy, would seem unavoidably to reveal classified information. However, further analysis of the IAEA`s safeguards approaches is warranted in order to understand fully the scope and nature of any problems. The issues are complex and difficult, and it is expected that common technical understandings will be essential for their resolution. Accordingly, this paper examines and compares traditional safeguards item accounting of fuel at a nuclear power station (especially spent fuel) with the challenges presented by inspections of classified materials. This analysis is intended to delineate more clearly the problems as well as reveal possible approaches, techniques, and technologies that could allow the adaptation of safeguards to the unprecedented task of inspecting classified materials. It is also hoped that a discussion of these issues can advance ongoing political-technical debates on international inspections of excess classified materials.

  1. Valdosta State University Partners with Regional Technical Colleges

    ERIC Educational Resources Information Center

    Ott, Kenny; Som, Yahya Mat; Martinez, Reynaldo L., Jr.

    2008-01-01

    Postsecondary institutions cannot survive as isolated islands and must constantly be motivated to pursue new partnerships to provide students the opportunity to transition through career and technical education (CTE). A partnership between Valdosta State University (VSU) in Valdosta, Georgia, and regional technical colleges is doing just that by…

  2. Case Study: Tri-County Regional Vocational Technical High School.

    ERIC Educational Resources Information Center

    Southern Regional Education Board, Atlanta, GA.

    Tri-County Regional Vocational Technical High School, which is located in the rural New England town of Franklin, Massachusetts, is a school of "choice" that students elect to attend. All of the school's 850 students must have a career/technical focus for their studies. Most of Tri-County's ninth-graders are unprepared for high school, and 38%…

  3. Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011) Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011)

    NASA Astrophysics Data System (ADS)

    Berk, H. L.

    2012-09-01

    The topic of the behaviour of energetic alpha particles in magnetic fusion confined plasmas is perhaps the ultimate frontier plasma physics issue that needs to be understood in the quest to achieve controlled power from the fusion reaction in magnetically confined plasmas. The partial pressure of alpha particles in a burning plasma will be ~5-10% of the total pressure and under these conditions the alpha particles may be prone to develop instability through Alfvénic interaction. This may lead, even with moderate alpha particle loss, to a burn quench or severe wall damage. Alternatively, benign Alfvénic signals may allow the vital information to control a fusion burn. The significance of this issue has led to extensive international investigations and a biannual meeting that began in Kyiv in 1989, followed by subsequent meetings in Aspenäs (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007) and Kyiv (2009). The meeting was initially entitled 'Alpha Particles in Fusion Research' and then was changed during the 1997 meeting to 'Energetic Particles in Magnetic Confinement Systems' in appreciation of the need to study the significance of the electron runaway, which can lead to the production of energetic electrons with energies that can even exceed the energy produced by fusion products. This special issue presents some of the mature interesting work that was reported at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was held in Austin, Texas, USA (7-11 September 2011). This meeting immediately followed a related meeting, the 5th IAEA Technical Meeting on Theory of Plasma Wave Instabilities (5-7 September 2011). The meetings shared one day (7 September 2011) with presentations relevant to both groups. The presentations from most of the participants, as well as some preliminary versions of papers, are available at the

  4. Great plains regional climate assessment technical report

    Technology Transfer Automated Retrieval System (TEKTRAN)

    The Great Plains region (GP) plays important role in providing food and energy to the economy of the United States. Multiple climatic and non-climatic stressors put multiple sectors, livelihoods and communities at risk, including agriculture, water, ecosystems and rural and tribal communities. The G...

  5. Co-ordination of the International Network of Nuclear Structure and Decay Data Evaluators; Summary Report of an IAEA Technical Meeting

    SciTech Connect

    Abriola, D.; Tuli, J.

    2009-03-23

    The IAEA Nuclear Data Section convened the 18th meeting of the International Network of Nuclear Structure and Decay Data Evaluators at the IAEA Headquarters, Vienna, 23 to 27 March 2009. This meeting was attended by 22 scientists from 14 Member States, plus IAEA staff, concerned with the compilation, evaluation and dissemination of nuclear structure and decay data. A summary of the meeting, recommendations/conclusions, data centre reports, and various proposals considered, modified and agreed by the participants are contained within this document. The International Network of Nuclear Structure and Decay Data (NSDD) Evaluators holds biennial meetings under the auspices of the IAEA, and consists of evaluation groups and data service centres in several countries. This network has the objective of providing up-to-date nuclear structure and decay data for all known nuclides by evaluating all existing experimental data. Data resulting from this international evaluation collaboration is included in the Evaluated Nuclear Structure Data File (ENSDF) and published in the journals Nuclear Physics A and Nuclear Data Sheets (NDS).

  6. Review of the Regional Biomass Energy Program: Technical projects

    SciTech Connect

    Lusk, P.

    1994-12-31

    This article summarizes technical projects of the regional Biomass Energy Program. Projects included are as follows: economic impact studies for renewable energy resources; alternative liquid fuels; Wood pellets fuels forum; residential fuel wood consumption; waste to energy decision-makers guide; fuel assessment for cogeneration facilities; municipal solid waste combustion characteristics.

  7. Final Scientific and Technical Report State and Regional Biomass Partnerships

    SciTech Connect

    Handley, Rick; Stubbs, Anne D.

    2008-12-29

    The Northeast Regional Biomass Program successfully employed a three pronged approach to build the regional capacity, networks, and reliable information needed to advance biomass and bioenergy technologies and markets. The approach included support for state-based, multi-agency biomass working groups; direct technical assistance to states and private developers; and extensive networking and partnership-building activities to share objective information and best practices.

  8. Special section containing papers presented at the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (Beijing, China, 17-20 September 2013) Special section containing papers presented at the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (Beijing, China, 17-20 September 2013)

    NASA Astrophysics Data System (ADS)

    Lin, Z.

    2014-10-01

    In magnetic fusion plasmas, a significant fraction of the kinetic pressure is contributed by superthermal charged particles produced by auxiliary heating (fast ions and electrons) and fusion reactions (a-particles). Since these energetic particles are often far away from thermal equilibrium due to their non-Maxwellian distribution and steep pressure gradients, the free energy can excite electromagnetic instabilities to intensity levels well above the thermal fluctuations. The resultant electromagnetic turbulence could induce large transport of energetic particles, which could reduce heating efficiency, degrade overall plasma confinement, and damage fusion devices. Therefore, understanding and predicting energetic particle confinement properties are critical to the success of burning plasma experiments such as ITER since the ignition relies on plasma self-heating by a-particles. To promote international exchanges and collaborations on energetic particle physics, the biannual conference series under the auspices of the International Atomic Energy Agency (IAEA) were help in Kyiv (1989), Aspenas (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007), Kyiv (2009), and Austin (2011). The papers in this special section were presented at the most recent meeting, the 13th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was hosted by the Fusion Simulation Center, Peking University, Beijing, China (17-20 September 2013). The program of the meeting consisted of 71 presentations, including 13 invited talks, 26 oral contributed talks, 30 posters, and 2 summary talks, which were selected by the International Advisory Committee (IAC). The IAC members include H. Berk, L.G. Eriksson, A. Fasoli, W. Heidbrink, Ya. Kolesnichenko, Ph. Lauber, Z. Lin, R. Nazikian, S. Pinches, S. Sharapov, K. Shinohara, K. Toi, G. Vlad, and X.T. Ding. The conference program

  9. Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011) Special issue containing papers presented at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems (7-11 September 2011)

    NASA Astrophysics Data System (ADS)

    Berk, H. L.

    2012-09-01

    The topic of the behaviour of energetic alpha particles in magnetic fusion confined plasmas is perhaps the ultimate frontier plasma physics issue that needs to be understood in the quest to achieve controlled power from the fusion reaction in magnetically confined plasmas. The partial pressure of alpha particles in a burning plasma will be ~5-10% of the total pressure and under these conditions the alpha particles may be prone to develop instability through Alfvénic interaction. This may lead, even with moderate alpha particle loss, to a burn quench or severe wall damage. Alternatively, benign Alfvénic signals may allow the vital information to control a fusion burn. The significance of this issue has led to extensive international investigations and a biannual meeting that began in Kyiv in 1989, followed by subsequent meetings in Aspenäs (1991), Trieste (1993), Princeton (1995), JET/Abingdon (1997), Naka (1999), Gothenburg (2001), San Diego (2003), Takayama (2005), Kloster Seeon (2007) and Kyiv (2009). The meeting was initially entitled 'Alpha Particles in Fusion Research' and then was changed during the 1997 meeting to 'Energetic Particles in Magnetic Confinement Systems' in appreciation of the need to study the significance of the electron runaway, which can lead to the production of energetic electrons with energies that can even exceed the energy produced by fusion products. This special issue presents some of the mature interesting work that was reported at the 12th IAEA Technical Meeting on Energetic Particles in Magnetic Confinement Systems, which was held in Austin, Texas, USA (7-11 September 2011). This meeting immediately followed a related meeting, the 5th IAEA Technical Meeting on Theory of Plasma Wave Instabilities (5-7 September 2011). The meetings shared one day (7 September 2011) with presentations relevant to both groups. The presentations from most of the participants, as well as some preliminary versions of papers, are available at the

  10. The IAEA's WorldAtom Internet site: International news and information services

    SciTech Connect

    Kyd, D.R.

    2000-07-01

    The International Atomic Energy Agency (IAEA) provides news and public information services via the Internet through its WorldAtom home page. The page is accessible at www.iaea.org/worldatom. Following are brief highlights of the items available on the site by clicking Press Centre, Reference Centre, or other links: Daily Press Review: Summaries of selected news items pertaining to global nuclear developments and the IAEA's work are provided each day, drawing upon a wide range of global media sources. IAEA NewsBriefs: Regularly featured are updates about IAEA activities related to areas of safety, technology transfer, and nuclear safeguards. Meetings and training courses: News about IAEA-sponsored symposia, seminars, and other meetings, as well as information about international meetings on atomic energy sponsored by other organizations, are updated on a daily basis. Press releases and statements: All IAEA press releases and media advisories since 1995 are accessible on the site. Topical and feature pages: In-depth coverage and links to information resources within and outside the IAEA are regularly given to selected topics of high international interest involving the IAEA. IAEA publications: listings and overviews of IAEA technical reports, safety standards, and other publications are updated as they are issued. Scientific and technical information: WorldAtom includes links (Reference Centre) to the International Nuclear Information System, IAEA's extensive bibliographic database of references and resources, to the nuclear database, and to departmental pages at IAEA that focus on IAEA programs and activities. IAEA documents: Electronic versions of official IAEA documents are added as they are issued. These documents include the texts and status lists of international conventions under IAEA auspices; IAEA information circulars to member states; IAEA annual reports (since 1995); and background reports and documents for the IAEA General Conference related to

  11. US-INDIA TECHNICAL COLLABORATION TO PROMOTE REGIONAL STABILITY.

    SciTech Connect

    Killinger, M. H.; Griggs, J. R.; Apt, Kenneth E.; Doyle, J. E.

    2001-01-01

    Two US-India documents were signed in 2000 that provided new impetus for scientific and technical cooperation between the two countries. The first document is the US-India Science and Technology Agreement, which is aimed at 'promoting scientific and technological cooperation between the people of their two countries.' The second is the US-India Joint Statement on Energy and Environment, which states 'the United States and India believe that energy and environment could be one of the most important areas of cooperation between the two countries.' In addition to the work already underway as part of these two agreements, the US Department of Energy (DOE) has established a US-India Science and Technology Initiative to utilize the expertise of DOE national laboratories to conduct activities that support US policy objectives in South Asia. PNNL and LANL are working with US government agencies to identify appropriate non-sensitive, non-nuclear areas for US-Indian technical collaboration. The objectives of such collaboration are to address visible national and international problems, build trust between the United States and India, and contribute to regional stability in South Asia. This paper describes the approach for this engagement, the Indian scientific organization and infrastructure, potential areas for collaboration, and current status of the initiative.

  12. Regional Resource Center Program (RRCP) Technical Assistance and ESEA Accountability

    ERIC Educational Resources Information Center

    Regional Resource Center Program, 2014

    2014-01-01

    The Elementary and Secondary Education (ESEA) flexibility program initiated in September 2011 holds several implications for special education accountability and, by extension, state education agencies and the technical assistance providers who support them. The U.S. Department of Education has approved ESEA waiver applications for a majority of…

  13. The United States National Climate Assessment - Alaska Technical Regional Report

    USGS Publications Warehouse

    Markon, Carl J.; Trainor, Sarah F.; Chapin, F. Stuart; Markon, Carl J.; Trainor, Sarah F.; Chapin, F. Stuart

    2012-01-01

    The Alaskan landscape is changing, both in terms of effects of human activities as a consequence of increased population, social and economic development and their effects on the local and broad landscape; and those effects that accompany naturally occurring hazards such as volcanic eruptions, earthquakes, and tsunamis. Some of the most prevalent changes, however, are those resulting from a changing climate, with both near term and potential upcoming effects expected to continue into the future. Alaska's average annual statewide temperatures have increased by nearly 4°F from 1949 to 2005, with significant spatial variability due to the large latitudinal and longitudinal expanse of the State. Increases in mean annual temperature have been greatest in the interior region, and smallest in the State's southwest coastal regions. In general, however, trends point toward increases in both minimum temperatures, and in fewer extreme cold days. Trends in precipitation are somewhat similar to those in temperature, but with more variability. On the whole, Alaska saw a 10-percent increase in precipitation from 1949 to 2005, with the greatest increases recorded in winter. The National Climate Assessment has designated two well-established scenarios developed by the Intergovernmental Panel on Climate Change (Nakicenovic and others, 2001) as a minimum set that technical and author teams considered as context in preparing portions of this assessment. These two scenarios are referred to as the Special Report on Emissions Scenarios A2 and B1 scenarios, which assume either a continuation of recent trends in fossil fuel use (A2) or a vigorous global effort to reduce fossil fuel use (B1). Temperature increases from 4 to 22°F are predicted (to 2070-2099) depending on which emissions scenario (A2 or B1) is used with the least warming in southeast Alaska and the greatest in the northwest. Concomitant with temperature changes, by the end of the 21st century the growing season is expected

  14. Final Technical Report of the Illinois Regional Resource Center. June 1, 1974 Through November 30, 1977.

    ERIC Educational Resources Information Center

    Berjohn, Harold; Boker-Pfeiffer, Dea

    The final technical report on the Illinois Regional Resource Center (RRC) details project activities (1974 to 1977) concerning the programing and assessment of unexplained or undiagnosed handicaps. Summaries and evaluation information are presented on the following RRC efforts: state program development (including technical assistance activities);…

  15. Improving Technical Vocational Education and Training in the Kurdistan Region--Iraq

    ERIC Educational Resources Information Center

    Constant, Louay; Culbertson, Shelly; Stasz, Cathleen; Vernez, Georges

    2014-01-01

    As Iraq's Kurdistan region develops rapidly, it is creating jobs that require a solid education and technical skills. The government has launched an ambitious reform of basic and secondary education to increase its quality and has expanded opportunities for tertiary technical and university education. But expansion of secondary vocational…

  16. The United States National Climate Assessment - Alaska Technical Regional Report

    USGS Publications Warehouse

    Markon, Carl J.; Trainor, Sarah F.; Chapin, F. Stuart; Markon, Carl J.; Trainor, Sarah F.; Chapin, F. Stuart

    2012-01-01

    The Alaskan landscape is changing, both in terms of effects of human activities as a consequence of increased population, social and economic development and their effects on the local and broad landscape; and those effects that accompany naturally occurring hazards such as volcanic eruptions, earthquakes, and tsunamis. Some of the most prevalent changes, however, are those resulting from a changing climate, with both near term and potential upcoming effects expected to continue into the future. Alaska's average annual statewide temperatures have increased by nearly 4°F from 1949 to 2005, with significant spatial variability due to the large latitudinal and longitudinal expanse of the State. Increases in mean annual temperature have been greatest in the interior region, and smallest in the State's southwest coastal regions. In general, however, trends point toward increases in both minimum temperatures, and in fewer extreme cold days. Trends in precipitation are somewhat similar to those in temperature, but with more variability. On the whole, Alaska saw a 10-percent increase in precipitation from 1949 to 2005, with the greatest increases recorded in winter. The National Climate Assessment has designated two well-established scenarios developed by the Intergovernmental Panel on Climate Change (Nakicenovic and others, 2001) as a minimum set that technical and author teams considered as context in preparing portions of this assessment. These two scenarios are referred to as the Special Report on Emissions Scenarios A2 and B1 scenarios, which assume either a continuation of recent trends in fossil fuel use (A2) or a vigorous global effort to reduce fossil fuel use (B1). Temperature increases from 4 to 22°F are predicted (to 2070-2099) depending on which emissions scenario (A2 or B1) is used with the least warming in southeast Alaska and the greatest in the northwest. Concomitant with temperature changes, by the end of the 21st century the growing season is expected

  17. The Technical Efficiency of Specialised Milk Farms: A Regional View

    PubMed Central

    Špička, Jindřich; Smutka, Luboš

    2014-01-01

    The aim of the article is to evaluate production efficiency and its determinants of specialised dairy farming among the EU regions. In the most of European regions, there is a relatively high significance of small specialised farms including dairy farms. The DEAVRS method (data envelopment analysis with variable returns to scale) reveals efficient and inefficient regions including the scale efficiency. In the next step, the two-sample t-test determines differences of economic and structural indicators between efficient and inefficient regions. The research reveals that substitution of labour by capital/contract work explains the variability of the farm net value added per AWU (annual work unit) income indicator by more than 30%. The significant economic determinants of production efficiency in specialised dairy farming are farm size, herd size, crop output per hectare, productivity of energy, and capital (at α = 0.01). Specialised dairy farms in efficient regions have significantly higher farm net value added per AWU than inefficient regions. Agricultural enterprises in inefficient regions have a more extensive structure and produce more noncommodity output (public goods). Specialised dairy farms in efficient regions have a slightly higher milk yield, specific livestock costs of feed, bedding, and veterinary services per livestock unit. PMID:25050408

  18. The technical efficiency of specialised milk farms: a regional view.

    PubMed

    Spička, Jindřich; Smutka, Luboš

    2014-01-01

    The aim of the article is to evaluate production efficiency and its determinants of specialised dairy farming among the EU regions. In the most of European regions, there is a relatively high significance of small specialised farms including dairy farms. The DEAVRS method (data envelopment analysis with variable returns to scale) reveals efficient and inefficient regions including the scale efficiency. In the next step, the two-sample t-test determines differences of economic and structural indicators between efficient and inefficient regions. The research reveals that substitution of labour by capital/contract work explains the variability of the farm net value added per AWU (annual work unit) income indicator by more than 30%. The significant economic determinants of production efficiency in specialised dairy farming are farm size, herd size, crop output per hectare, productivity of energy, and capital (at α = 0.01). Specialised dairy farms in efficient regions have significantly higher farm net value added per AWU than inefficient regions. Agricultural enterprises in inefficient regions have a more extensive structure and produce more noncommodity output (public goods). Specialised dairy farms in efficient regions have a slightly higher milk yield, specific livestock costs of feed, bedding, and veterinary services per livestock unit.

  19. Two regional regulatory meetings on distributed resources. Final technical report

    SciTech Connect

    2001-02-01

    An overview and discussion of Eastern Regional and Western Regional State Utility Regulators Workshops on Distributed Resources (DR) is given. The purpose of the workshops was for state regulators to learn about DR and the regulatory issues surrounding their greater use. The following issues were addressed: introduction to DR technologies and their potential benefits, interconnection and market barriers, regulatory incentives, rate design issues, and environmental issues.

  20. RECRUITMENT OF U.S. CITIZENS FOR VACANCIES IN IAEA SAFEGUARDS

    SciTech Connect

    PEPPER,S.E.; DECARO,D.; WILLIAMS,G.; CARELLI,J.; ASSUR,M.

    1999-07-25

    The International Atomic Energy Agency (IAEA) relies on its member states to assist with recruiting qualified individuals for positions within the IAEA's secretariat. It is important that persons within and outside the US nuclear and safeguards industries become aware of career opportunities available at the IAEA, and informed about important vacancies. The IAEA has established an impressive web page to advertise opportunities for employment. However, additional effort is necessary to ensure that there is sufficient awareness in the US of these opportunities, and assistance for persons interested in taking positions at the IAEA. In 1998, the Subgroup on Safeguards Technical Support (SSTS) approved a special task under the US Support Program to IAEA Safeguards (USSP) for improving US efforts to identify qualified candidates for vacancies in IAEA's Department of Safeguards. The International Safeguards Project Office (ISPO) developed a plan that includes increased advertising, development of a web page to support US recruitment efforts, feedback from the US Mission in Vienna, and interaction with other recruitment services provided by US professional organizations. The main purpose of this effort is to educate US citizens about opportunities at the IAEA so that qualified candidates can be identified for the IAEA's consideration.

  1. National Regional Resource Center of Pennsylvania. Final Technical Report.

    ERIC Educational Resources Information Center

    Streissguth, William O.; Goode, Paul

    The final report covers activities of the National Regional Resource Center in the area of special education from 1970 through June 30, 1974. Reported is program emphasis on the development of a statewide diagnostic-prescriptive resource system including target classes (which served as data collection points and demonstration classes),…

  2. An Assessment of Vocational and Technical Education in the South Pacific Region.

    ERIC Educational Resources Information Center

    Ross, David

    Technical and vocational education in the developing countries of the South Pacific region vary from the well-established to just commencing. Within the region as a whole, facilities exist to meet all the needs for semiskilled and skilled workers as well as for most middle and higher level needs; additional needs not catered to within the region…

  3. Middle Grades Reform in California: Regional Processes: Interim Evaluation. Technical Report 2. Draft.

    ERIC Educational Resources Information Center

    Slater, Jana Kay

    The California agenda for middle-grade reform is based on 10 regional networks, each composed of 1 foundation school and approximately 10 partnership schools. The second in a series of program evaluations, Technical Report 2 presents regional level information on the first 2 years of implementation of the middle-grade reform proposals, 1988-89 and…

  4. The US Support program to IAEA Safeguards - 2008

    SciTech Connect

    Pepper,S.

    2008-06-09

    The U.S. Support Program to IAEA Safeguards (USSP) was established in 1977 to provide technical assistance to the IAEA Department of Safeguards. Since that time the U.S. Department of State has provided funding of over $200 million and over 900 tasks have been completed by USSP contractors on behalf of the KEA. The USSP is directed by a U.S. interagency subcommittee known as the Subgroup on Safeguards Technical Support (SSTS) and is managed by the International Safeguards Project Office (ISPO) at Brookhaven National Laboratory. In recent years, the SSTS and ISPO have identified priorities to guide the process of determining which IAEA requests are aligned with US. policy and will be funded. The USSP priorities are reviewed and updated prior to the USSP Annual Review Meeting which is hosted by the International Atomic Energy Agency (IAEA) each spring in Vienna, Austria. This paper will report on the 2008 USSP priorities and be an introduction for a session which will consist of four papers on USSP priorities and four other papers related to USSP activities.

  5. Regional-technical information network system by PC-based communication 'Kougi Net Niigata'

    NASA Astrophysics Data System (ADS)

    Tanaka, Koichi; Kitagawa, Yoichi; Hoshino, Kimiaki

    'Regional-technical information' database was constructed by Industrial research institute of Niigata prefecture. This is available for industries in our prefecture with our PC-based communication network system. And also, it provides communication measures called BBS and electronic mail service with which they can communicate each other. This system is considered to give three effects. First of all, they can get technical information required in regional industries that is not provided by commercial database at their office or factory speedy and correctly. Secondly, they can easily survey technical background of local industries they want to take into partnership in their extension of work. Thirdly, since it provides a place where they can exchange information each other, it promotes their development of new commercial products and partnership.

  6. IAEA INTERCOMPARISON EXERCISES OF THYROID MEASUREMENT: PERFORMANCE OF LATIN AMERICAN AND CARIBBEAN LABORATORIES.

    PubMed

    Dantas, B M; Dantas, A L A; Cruz-Suarez, R

    2016-09-01

    (131)I is widely used in Latin America and Caribbean Region in the field of nuclear medicine and has been recognised as one of the main sources of potential intake of radionuclides by the staff. The In Vivo Monitoring laboratory of the Institute for Radiation Protection and Dosimetry (IRD-CNEN-Brazil) organised three intercomparison exercises (2005, 2009 and 2013) in the scope of IAEA technical cooperation projects RLA9049 and RLA9066 aimed to disseminate and harmonise the technique for measuring (131)I in the human thyroid. The number of participants in Latin America increased from 9 to 20 institutions from 7 and 13 countries, respectively, over the last 10 y. The participants have improved significantly their ability on the in vivo measurement technique. In the 2013 round all laboratories which reported results presented performances in an acceptable range according to the ISO criteria indicating the benefit of such exercises in the region. PMID:26546253

  7. Indiana Vocational Technical College: Region 8. Organizational Development Research. A Multiplex Opportunities for Vocational Education Report.

    ERIC Educational Resources Information Center

    Britton, Ronald B.

    Four major components comprised the Organizational Development Research Project at Indiana Vocational Technical College (Ivy Tech). The major component of the research was an evaluation of a model of cost effectiveness/benefit analysis previously developed for postsecondary vocational educators in Indiana. Cost data for all Region 8 Ivy Tech…

  8. Trends in Articulation Arrangements for Technical and Vocational Education in the South East Asian Region.

    ERIC Educational Resources Information Center

    Haas, Adrian R.

    Trends in articulation arrangements for technical and vocational education (TVE) in the South East Asia region were studied. A key feature of articulation is the existence of pathways that allow graduates of one course of study to progress to other courses. Effective articulation opens up advancement for individuals and helps to create a flexible…

  9. TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

    SciTech Connect

    HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

    2003-07-13

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The presentation will include a

  10. A brief history of NDA at the IAEA.

    SciTech Connect

    Sprinkle, J. K.; Sinkule, B. J.; Hsue, S.-T.; Abhold, M. E.

    2001-01-01

    Nearly 30 years ago, the first portable nondestructive assay instrument, a SAM-II, was brought to Vienna for IAEA consideration. This initial foray into the usage of nondestructive assay (NDA) as an independent assessment tool has materialized into one of the important tools for IAEA inspections. NDA instruments have several inherent advantages for inspectors; their measurements generate no radioactive waste, provide immediate answers, do not require specialized operators, and can be either taken to the items to be measured (portable instruments), or the items for measurement can be brought to the instruments, such as can be applied in on-site IAEA laboratories or off-site IAEA lab at Siebersdorf. The SAM-II was a small, lightweight, battery-powered, gamma-ray instrument used for uranium enrichment measurements. It was also found to be usehl for locating nuclear material, distinguishing between uranium and plutonium, and determining the active length of items like fuel pins. However it was not well suited for determining the amount of bulk material present, except for small containers of low-density materials. A 6-sided neutron coincidence counter, easily disassembled so it could be shipped and carried by airplane, was developed for bulk measurements of plutonium. The HLNCC (High Level Neutron Coincidence Counter) was immediately useful for quantitative measurements of pure plutonium oxide. However, the IAEA had to make a trade-off between the ease of use of NDA instruments on-site, and the problems of obtaining small samples for shipment to an independent lab for more accurate analysis. NDA does not create radioactive waste, so as waste handling has become more cautious and more regulated, NDA looks better and better. After acceptance of NDA by the IAEA for routine use, the follow-up question was naturally, 'How much better can this measurement be made?' The Program for Technical Assistance to IAEA Safeguards (POTAS) supported multiple and varied efforts in this

  11. IAEA Fellowship Program, 1997 report on United States participants

    SciTech Connect

    1997-12-31

    The International Atomic Energy Agency (IAEA) Fellowship Program began in April 1958 as a part of the Agency`s Technical Cooperation (TC) Program. Through the TC Program, the IAEA provides technical assistance to meet the needs of recipient countries and to bring about a substantial transfer of technology. This is done by providing experts, equipment, fellowships, and training courses. This report addresses the US component of the fellowship program. These fellowships provide opportunities for research and training of scientists, engineers and physicians from developing countries in the peaceful application of nuclear energy. The fellowships are awarded to persons who are, or soon will be, trusted with responsibilities that are important to the development of their countries. Fellowship awards are classified into two groups, those financed by the IAEA General Fund or the UNDP Fund (Type 1 Fellowships and Scientific Visits), and those offered by Member States (Type 2 Fellowships). In placing individuals, preference is given to applicants from countries that are signatories to the Treaty on Non-Proliferation of Nuclear Weapons or to the Treaty for the Prohibition of Nuclear Weapons in Latin America.

  12. IAEA Fellowship Program, 1996 report on United States participants

    SciTech Connect

    1996-12-31

    The International Atomic Energy Agency (IAEA) Fellowship Program began in April 1958 as a part of the Agency`s Technical Cooperation (TC) Program. Through the TC Program, the IAEA provides technical assistance to meet the needs of recipient countries and to bring about a substantial transfer of technology. This is done by providing experts, equipment, fellowships, and training courses. This report addresses the US component of the fellowship program. These fellowships provide opportunities for research and training of scientists, engineers and physicians from developing countries in the peaceful application of nuclear energy. The fellowships are awarded to persons who are, or soon will be, trusted with responsibilities that are important to the development of their countries. Fellowship awards are classified into two groups, those financed by the IAEA General Fund or the UNDP Fund (Type 1 Fellowships and Scientific Visits), and those offered by Member States (Type 2 Fellowships). In placing individuals, preference is given to applicants from countries that are signatories to the Treaty on Non-Proliferation of Nuclear Weapons or to the Treaty for the Prohibition of Nuclear Weapons in Latin America.

  13. Four Years of Practical Arrangements between IAEA and Moscow SIA 'Radon': Preliminary Results - 13061

    SciTech Connect

    Batyukhnova, O.G.; Karlina, O.K.; Neveikin, P.P.

    2013-07-01

    The International Education Training Centre (IETC) at Moscow State Unitary Enterprise Scientific and Industrial Association 'Radon' (SIA 'Radon'), in co-operation with the International Atomic Energy Agency (IAEA), has developed expertise and provided training to waste management personnel for the last 15 years. Since 1997, the educational system of the enterprise with the support of the IAEA has acquired an international character: more than 470 experts from 35 countries- IAEA Member States completed the professional development. Training is conducted at various thematic courses or fellowships for individual programs and seminars on IAEA technical projects. In June 2008 a direct agreement (Practical Arrangements) was signed between SIA 'Radon' and the IAEA on cooperation in the field of development of new technologies, expert's advice to IAEA Member States, and, in particular, the training of personnel in the field of radioactive waste management (RWM), which opens up new perspectives for fruitful cooperation of industry professionals. The paper summarizes the current experience of the SIA 'Radon' in the organization and implementation of the IAEA sponsored training and others events and outlines some of strategic educational elements, which IETC will continue to pursue in the coming years. (authors)

  14. IAEA reorganizes nuclear information services

    SciTech Connect

    Levine, E.

    2012-08-15

    As part of an overall restructuring of the International Atomic Energy Agency's Department of Nuclear Energy, the agency has established the Nuclear Information Section (NIS). The restructuring, recently announced by IAEA Director General Yukiya Amano, also includes the creation of a separate Nuclear Knowledge Management (NKM) Section, as demand for assistance in this area is growing among member countries. According to the NIS Web site, 'This restructuring and the creation of the NIS provides an opportunity for further enhancing existing information products and services and introducing new ones-all with an eye towards advancing higher organizational efficiency and effectiveness.'

  15. Iaea Activities Supporting the Applications of Research Reactors in 2013

    NASA Astrophysics Data System (ADS)

    Peld, Nathan D.; Ridikas, Danas

    2014-02-01

    As the underutilization of research reactors around the world persists as a primary topic of concern among facility owners and operators, the IAEA responded in 2013 with a broad range of activities to address the planning, execution and improvement of many experimental techniques. The revision of two critical documents for planning and diversifying a facility's portfolio of applications, TECDOC 1234 “The Applications of Research Reactors” and TECDOC 1212 “Strategic Planning for Research Reactors”, is in progress in order to keep this information relevant, corresponding to the dynamism of experimental techniques and research capabilities. Related to the latter TECDOC, the IAEA convened a meeting in 2013 for the expert review of a number of strategic plans submitted by research reactor operators in developing countries. A number of activities focusing on specific applications are either continuing or beginning as well. In neutron activation analysis, a joint round of inter-comparison proficiency testing sponsored by the IAEA Technical Cooperation Department will be completed, and facility progress in measurement accuracy is described. Also, a training workshop in neutron imaging and Coordinated Research Projects in reactor benchmarks, automation of neutron activation analysis and neutron beam techniques for material testing intend to advance these activities as more beneficial services to researchers and other users.

  16. Trip report on IAEA Training Workshop on Implementation of Integrated Management Systems for Research Reactors (T3-TR-45496).

    SciTech Connect

    Pratt, Richard J.

    2013-11-01

    From 17-21 June 2013, Sandia National Laboratories, Technical Area-V (SNL TA-V) represented the United States Department of Energy/National Nuclear Security Administration (DOE/NNSA) at the International Atomic Energy Agency (IAEA) Training Workshop (T3-TR-45486). This report gives a breakdown of the IAEA regulatory structure for those unfamiliar, and the lessons learned and observations that apply to SNL TA-V that were obtained from the workshop. The Safety Report Series, IAEA workshop final report, and SNL TA-V presentation are included as attachments.

  17. 23rd IAEA Fusion Energy Conference: Summary Of Sessions EX/C and ICC

    SciTech Connect

    Hawryluk, R J

    2011-01-05

    An overview is given of recent experimental results in the areas of innovative confinement concepts, operational scenarios and confinement experiments as presented at the 2010 IAEA Fusion Energy Conference. Important new findings are presented from fusion devices worldwide, with a strong focus towards the scientific and technical issues associated with ITER and W7-X devices, presently under construction.

  18. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... special inspection at a facility: (1) Ship material accountancy samples taken for the IAEA's use, in... U.S. Government; (3) Use radiation detection and measurement devices; (4) Apply seals and...

  19. 10 CFR 75.8 - IAEA inspections.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... special inspection at a facility: (1) Ship material accountancy samples taken for the IAEA's use, in... U.S. Government; (3) Use radiation detection and measurement devices; (4) Apply seals and...

  20. The Status of Large-Scale Assessment in the Pacific Region. REL Technical Brief. REL 2008-No. 003

    ERIC Educational Resources Information Center

    Ryan, Jennifer; Keir, Scott

    2008-01-01

    This technical brief describes the large-scale assessment measures and practices used in the jurisdictions served by the Pacific Regional Educational Laboratory. The need for effective large-scale assessment was identified as a major priority for improving student achievement in the Pacific Region jurisdictions: American Samoa, Guam, Hawaii, the…

  1. Summaries of the Regional Conferences Held in Preparation for the Second International Congress on Technical and Vocational Education.

    ERIC Educational Resources Information Center

    UNEVOC Info, 1999

    1999-01-01

    In 1998, five regional conferences were held in preparation for the Second International Congress on Technical and Vocational Education (TVE). The Asia-Pacific regional conference focused on challenges of the 21st century, demands of the world of work, and changing patterns in the delivery of training programs. The European symposium covered five…

  2. Development and Implementation of a Model Regional Information System for Vocational-Technical Education. Final Report. Vol. 2.

    ERIC Educational Resources Information Center

    Tennessee Univ., Knoxville. Occupational Research and Development Coordinating Unit.

    Volume 2 of the report on the development and implementation of a model regional information system for vocational-technical education consists of appendixes to volume 1 and includes the following supportive data and project materials: (1) information sources used by 36 administrators in Appalachian regions of Tennessee, North Carolina, and…

  3. The IAEA: Neutralizing Iraq's nuclear weapons potential

    SciTech Connect

    Zifferero, M.

    1993-04-01

    With support from UNSCOM and staff members from several countries, the IAEA has succeeded in identifying and destroying most of Iraq's nuclear weapons potential. IAEA activities in Iraq have also established a sound basis for long-term monitoring of Iraq. This will involve several procedures and techniques, including the periodic monitoring of Iraq's main bodies of water and unannounced visits of resident inspectors to plants, factories, and research centers.

  4. The role of IAEA in coordinating research and transferring technology in radiation chemistry and processing of polymers

    NASA Astrophysics Data System (ADS)

    Haji-Saeid, M.; Sampa, M. H.; Ramamoorthy, N.; Güven, O.; Chmielewski, A. G.

    2007-12-01

    The IAEA has been playing a significant role in fostering developments in radiation technology in general and radiation processing of polymers in particular, among its Member States (MS) and facilitate know-how/technology transfer to developing MS. The former is usually achieved through coordinated research projects (CRP) and thematic technical meetings, while the latter is mainly accomplished through technical cooperation (TC) projects. Coordinated research projects encourage research on, and development and practical application of, radiation technology to foster exchange of scientific and technical information. The technical cooperation (TC) programme helps Member States to realize their development priorities through the application of appropriate radiation technology. The IAEA has implemented several coordinated research projects (CRP) recently, including one on-going project, in the field of radiation processing of polymeric materials. The CRPs facilitated the acquisition and dissemination of know-how and technology for controlling of degradation effects in radiation processing of polymers, radiation synthesis of stimuli-responsive membranes, hydrogels and absorbents for separation purposes and the use of radiation processing to prepare biomaterials for applications in medicine. The IAEA extends cooperation to well-known international conferences dealing with radiation technology to facilitate participation of talented scientists from developing MS and building collaborations. The IAEA published technical documents, covering the findings of thematic technical meetings (TM) and coordinated research projects have been an important source of valuable practical information.

  5. State Policies on Teacher Evaluation Practices in the Midwest Region. REL Technical Brief. REL 2008-No. 004

    ERIC Educational Resources Information Center

    Brandt, Chris; Thomas, Julia; Burke, Matt

    2008-01-01

    This technical brief describes state-level policies and procedural requirements for guiding teacher evaluation practices at the district level in the seven states served by the Midwest Regional Educational Laboratory: Illinois, Indiana, Iowa, Michigan, Minnesota, Ohio, and Wisconsin. Building on the Issues & Answers report "Examining District…

  6. The US Support Program to IAEA Safeguards Priority of Training and Human Resources

    SciTech Connect

    Queirolo,A.

    2008-06-13

    The U.S. Support Program to IAEA Safeguards (USSP) priority of training and human resources is aimed at providing the Department of Safeguards with an appropriate mixture of regular staff and extrabudgetary experts who are qualified to meet the IAEA's technical needs and to provide personnel with appropriate instruction to improve the technical basis and specific skills needed to perform their job functions. The equipment and methods used in inspection activities are unique, complex, and evolving. New and experienced safeguards inspectors need timely and effective training to perform required tasks and to learn new skills prescribed by new safeguards policies or agreements. The role of the inspector has changed from that of strictly an accountant to include that of a detective. New safeguards procedures are being instituted, and therefore, experienced inspectors must be educated on these new procedures. The USSP also recognizes the need for training safeguards support staff, particularly those who maintain and service safeguards equipment (SGTS), and those who perform information collection and analysis (SGIM). The USSP is committed to supporting the IAEA with training to ensure the effectiveness of all staff members and will continue to offer its assistance in the development and delivery of basic, refresher, and advanced training courses. This paper will discuss the USSP ongoing support in the area of training and IAEA staffing.

  7. IAEA Safeguards: Past, Present, and Future

    SciTech Connect

    Santi, Peter A.; Hypes, Philip A.

    2012-06-14

    This talk will present an overview of the International Atomic Energy Agency with a specific focus on its international safeguards mission and activities. The talk will first present a brief history of the IAEA and discuss its current governing structure. It will then focus on the Safeguards Department and its role in providing assurance that nuclear materials are being used for peaceful purposes. It will then look at how the IAEA is currently evolving the way in which it executes its safeguards mission with a focus on the idea of a state-level approach.

  8. Technical and Non-Technical Measures for air pollution emission reduction: The integrated assessment of the regional Air Quality Management Plans through the Italian national model

    NASA Astrophysics Data System (ADS)

    D'Elia, I.; Bencardino, M.; Ciancarella, L.; Contaldi, M.; Vialetto, G.

    2009-12-01

    The Italian Air Quality legislation underwent sweeping changes with the implementation of the 1996 European Air Quality Framework Directive when the Italian administrative Regions were entrusted with air quality management tasks. The most recent Regional Air Quality Management Plans (AQMPs) highlighted the importance of Non-Technical Measures (NTMs), in addition to Technical Measures (TMs), in meeting environmental targets. The aim of the present work is to compile a list of all the TMs and NTMs taken into account in the Italian Regional AQMPs and to give in the target year, 2010, an estimation of SO 2, NO x and PM 10 emission reductions, of PM 10 concentration and of the health impact of PM 2.5 concentrations in terms of Life Expectancy Reduction. In order to do that, RAINS-Italy, as part of the National Integrated Modeling system for International Negotiation on atmospheric pollution (MINNI), has been applied. The management of TMs and NTMs inside RAINS have often obliged both the introduction of exogenous driving force scenarios and the control strategy modification. This has inspired a revision of the many NTM definitions and a clear choice of the definition adopted. It was finally highlighted that only few TMs and NTMs implemented in the AQMPs represent effective measures in reaching the environmental targets.

  9. Nonproliferation, Disarmament and the IAEA in Tomorrow's World

    SciTech Connect

    Jill Cooley

    2008-09-09

    Jill Cooley, Director of the Division of Concepts and Planning in the International Atomic Energy Agency's (IAEA) Department of Safeguards, gives an overview of the IAEA safeguards system and describe current verification challenges and potential new roles for the agency.

  10. PREFACE: 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and 21st IAEA TM on Research Using Small Fusion Devices (RUSFD)

    NASA Astrophysics Data System (ADS)

    Iván Vargas-Blanco, V.; Herrera-Velázquez, J. Julio E.

    2015-03-01

    Written contributions from participants of the Joint 15th Latin American Workshop on Plasma Physics (LAWPP 2014) - 21st IAEA Technical Meeting on Research Using Small Fusion Devices (21st IAEA TM RUSFD). The International Advisory Committees of the 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and the 21st IAEA TM on Research Using Small Fusion Devices (RUSFD), agreed to carry out together this Joint LAWPP 2014 - 21st RUSFD in San José, Costa Rica, on 27-31 January 2014. The Joint LAWPP 2014 - 21st RUSFD meeting, organized by the Instituto Tecnológico de Costa Rica, Universidad Nacional de Costa Rica, and Ad Astra Rocket Company in collaboration with the International Atomic Energy Agency (IAEA). The Latin American Workshop on Plasma Physics (LAWPP) is a series of events which has been held periodically since 1982, with the purpose of providing a forum in which the research of the Latin American plasma physics community can be displayed, as well as fostering collaborations among plasma scientists within the region and with researchers from the rest of the world. Recognized plasma scientists from developed countries are specially invited to the meeting to present the state of the art on several "hot" topics related to plasma physics. It is an open meeting, with an International Advisory Committee, in which the working language is English. It was firstly held in 1982 in Cambuquira, Brazil, followed by workshops in Medellín, Colombia (1985), Santiago de Chile, Chile (1988), Buenos Aires, Argentina (1990), Mexico City, Mexico (1992), Foz do Iguaçu, Brazil (1994, combined with the International Congress on Plasma Physics (ICPP)), Caracas, Venezuela (1997), Tandil, Argentina (1998), La Serena, Chile (2000), Sao Pedro, Brazil (2003), Mexico City, Mexico (2005), Caracas, Venezuela (2007), Santiago de Chile, Chile (2010, combined with the ICPP) and Mar de Plata, Argentina (2011). The 21st IAEA TM on Research Using Small Fusion Devices is an ideal forum for

  11. A Report to the U.S. Department of Education on Educational Challenges and Technical Assistance Needs for the Northeast Region

    ERIC Educational Resources Information Center

    CNA Corporation, 2005

    2005-01-01

    The Northeast Regional Advisory Committee (NE RAC) provides an assessment of the technical assistance needs of educators in the Northeast Region in response to a directive from the Secretary of the U.S. Department of Education (ED). The Secretary will use this assessment in establishing 20 comprehensive centers to provide technical assistance to…

  12. Latin American dose survey results in mammography studies under IAEA programme: radiological protection of patients in medical exposures (TSA3).

    PubMed

    Mora, Patricia; Blanco, Susana; Khoury, Helen; Leyton, Fernando; Cárdenas, Juan; Defaz, María Yolanda; Garay, Fernando; Telón, Flaviano; Aguilar, Juan Garcia; Roas, Norma; Gamarra, Mirtha; Blanco, Daniel; Quintero, Ana Rosa; Nader, Alejandro

    2015-03-01

    Latin American countries (Argentina, Brazil, Chile, Costa Rica, Cuba, Ecuador, El Salvador, Guatemala, Mexico, Nicaragua, Paraguay, Uruguay and Venezuela) working under the International Atomic Energy Agency (IAEA) Technical Cooperation Programme: TSA3 Radiological Protection of Patients in Medical Exposures have joined efforts in the optimisation of radiation protection in mammography practice. Through surveys of patient doses, the region has a unique database of diagnostic reference levels for analogue and digital equipment that will direct future optimisation activities towards the early detection of breast cancer among asymptomatic women. During RLA9/057 (2007-09) 24 institutions participated with analogue equipment in a dose survey. Regional training on methodology and measurement equipment was addressed in May 2007. The mean glandular dose (DG) was estimated using the incident kerma in air and relevant conversion coefficients for both projections craneo caudal and mediolateral oblique (CC and MLO). For Phase 2, RLA9/067 (2010-11), it was decided to include also digital systems in order to see their impact in future dose optimisation activities. Any new country that joined the project received training in the activities through IAEA expert missions. Twenty-nine new institutions participated (9 analogue and 20 digital equipment). A total of 2262 patient doses were collected during this study and from them D(G) (mGy) for both projections were estimated for each institution and country. Regional results (75 percentile in mGy) show for CC and MLO views, respectively: RLA9/057 (analogue) 2.63 and 3.17; RLA/067: 2.57 and 3.15 (analogue) and 2.69 and 2.90 (digital). Regarding only digital equipment for CC and MLO, respectively, computed radiography systems showed 2.59 and 2.78 and direct digital radiography (DDR) systems 2.78 and 3.04. Based on the IAEA Basic Safety Standard (BSS) reference dose (3 mGy), it can be observed that there is enough room to start

  13. Latin American dose survey results in mammography studies under IAEA programme: radiological protection of patients in medical exposures (TSA3).

    PubMed

    Mora, Patricia; Blanco, Susana; Khoury, Helen; Leyton, Fernando; Cárdenas, Juan; Defaz, María Yolanda; Garay, Fernando; Telón, Flaviano; Aguilar, Juan Garcia; Roas, Norma; Gamarra, Mirtha; Blanco, Daniel; Quintero, Ana Rosa; Nader, Alejandro

    2015-03-01

    Latin American countries (Argentina, Brazil, Chile, Costa Rica, Cuba, Ecuador, El Salvador, Guatemala, Mexico, Nicaragua, Paraguay, Uruguay and Venezuela) working under the International Atomic Energy Agency (IAEA) Technical Cooperation Programme: TSA3 Radiological Protection of Patients in Medical Exposures have joined efforts in the optimisation of radiation protection in mammography practice. Through surveys of patient doses, the region has a unique database of diagnostic reference levels for analogue and digital equipment that will direct future optimisation activities towards the early detection of breast cancer among asymptomatic women. During RLA9/057 (2007-09) 24 institutions participated with analogue equipment in a dose survey. Regional training on methodology and measurement equipment was addressed in May 2007. The mean glandular dose (DG) was estimated using the incident kerma in air and relevant conversion coefficients for both projections craneo caudal and mediolateral oblique (CC and MLO). For Phase 2, RLA9/067 (2010-11), it was decided to include also digital systems in order to see their impact in future dose optimisation activities. Any new country that joined the project received training in the activities through IAEA expert missions. Twenty-nine new institutions participated (9 analogue and 20 digital equipment). A total of 2262 patient doses were collected during this study and from them D(G) (mGy) for both projections were estimated for each institution and country. Regional results (75 percentile in mGy) show for CC and MLO views, respectively: RLA9/057 (analogue) 2.63 and 3.17; RLA/067: 2.57 and 3.15 (analogue) and 2.69 and 2.90 (digital). Regarding only digital equipment for CC and MLO, respectively, computed radiography systems showed 2.59 and 2.78 and direct digital radiography (DDR) systems 2.78 and 3.04. Based on the IAEA Basic Safety Standard (BSS) reference dose (3 mGy), it can be observed that there is enough room to start

  14. Radionuclide transfer to fruit in the IAEA TRS No. 472

    NASA Astrophysics Data System (ADS)

    Carini, F.; Pellizzoni, M.; Giosuè, S.

    2012-04-01

    This paper describes the approach taken to present the information on fruits in the IAEA report TRS No. 472, supported by the IAEA-TECDOC-1616, which describes the key transfer processes, concepts and conceptual models regarded as important for dose assessment, as well as relevant parameters for modelling radionuclide transfer in fruits. Information relate to fruit plants grown in agricultural ecosystems of temperate regions. The relative significance of each pathway after release of radionuclides depends upon the radionuclide, the kind of crop, the stage of plant development and the season at time of deposition. Fruit intended as a component of the human diet is borne by plants that are heterogeneous in habits, and morphological and physiological traits. Information on radionuclides in fruit systems has therefore been rationalised by characterising plants in three groups: woody trees, shrubs, and herbaceous plants. Parameter values have been collected from open literature, conference proceedings, institutional reports, books and international databases. Data on root uptake are reported as transfer factor values related to fresh weight, being consumption data for fruits usually given in fresh weight.

  15. Practices and Procedures Guiding Workforce Development Initiatives in One Louisiana Technical College Region

    ERIC Educational Resources Information Center

    Wainwright, William S.

    2004-01-01

    The study reported in this paper surveyed eight campus deans in the Louisiana Technical College Greater Baton Rouge/Northshore District II Service Delivery Area about the institutional infrastructure for providing workforce training and continuing education to their respective communities. Study results indicated that while all campuses in the…

  16. Fostering applications of neutron scattering techniques in developing countries: IAEA's role

    NASA Astrophysics Data System (ADS)

    Paranjpe, Shriniwas K.; Mank, G.; Ramamoorthy, N.

    2006-11-01

    Over the last 60 years research reactors have played an important role in technological and socio-economical development of mankind. Neutron scattering has been the workhorse for research and development in materials science. Developing countries with moderate flux research reactors have also been involved in using this technique. The reactors and the facilities around them have a large potential for applications, while their under-utilization has been a concern for many member states. The International Atomic Energy Agency (IAEA) has been supporting its member states in the enhancement of utilization of their research reactors. Technical meetings focussing on the area of current interests with potential applications are organized under the project on “effective utilization of research reactors,” e.g. on residual stress measurement, neutron reflectometry. Coordinated research projects (CRPs) bring together scientists from developed and developing countries, build collaborations, and exchange expertise and technology. The CRPs on research reactor utilization include topics like development of small-angle neutron scattering applications and development of sources and imaging systems for neutron radiography. New CRPs on the measurement of residual stress and accelerator-driven neutron sources will be initiated soon. The results from these meetings of CRPs are published as technical documents of the IAEA that would act as guidelines for capacity building for research reactor managers. This paper will present some of the salient features of IAEA activities in promoting research reactor utilization.

  17. Progresses in tritium accident modelling in the frame of IAEA EMRAS II

    SciTech Connect

    Galeriu, D.; Melintescu, A.

    2015-03-15

    The assessment of the environmental impact of tritium release from nuclear facilities is a topic of interest in many countries. In the IAEA's Environmental Modelling for Radiation Safety (EMRAS I) programme, progresses for routine releases were done and in the EMRAS II programme a dedicated working group (WG 7 - Tritium Accidents) focused on the potential accidental releases (liquid and atmospheric pathways). The progresses achieved in WG 7 were included in a complex report - a technical document of IAEA covering both liquid and atmospheric accidental release consequences. A brief description of the progresses achieved in the frame of EMRAS II WG 7 is presented. Important results have been obtained concerning washout rate, the deposition on the soil of HTO and HT, the HTO uptake by leaves and the subsequent conversion to OBT (organically bound tritium) during daylight. Further needs of the processes understanding and the experimental efforts are emphasised.

  18. Ethanol production in southern tier east region of New York: technical and economic feasibiity. Final report

    SciTech Connect

    Kalter, R.J.; Boisvert, R.N.; Gabler, E.C.; Walker, L.P.; Pellerin, R.A.

    1981-03-01

    This is the third of five region-specific feasibility studies on regional production of ethanol. It was found that deproteinized whey resources in this region of New York could support ethanol production in amounts ranging from about 1.5 million to 5 million gallons a year while also producing a high-protein, high-mineral animal feed. Ethanol is an octane booster which can be used as a gasoline extender to produce gasohol.

  19. Facilitation of the Estuary/Ocean Subgroup and the Expert Regional Technical Group, Fiscal Year 2014 Annual Report

    SciTech Connect

    Johnson, Gary E.

    2014-09-01

    This document is the annual report for fiscal year 2014 for the project called Facilitation of the Estuary/Ocean Subgroup (EOS) and the Expert Regional Technical Group (ERTG). Pacific Northwest National Laboratory (PNNL) conducted the project for the Bonneville Power Administration. The EOS and ERTG are part of the research, monitoring, and evaluation and habitat restoration efforts, respectively, developed by the Action Agencies (BPA, U.S. Army Corps of Engineers) in response to obligations arising from the Endangered Species Act as a result of operation of the Federal Columbia River Power System and implemented under the Columbia Estuary Ecosystem Restoration Program.

  20. Proficiency Testing as a tool to monitor consistency of measurements in the IAEA/WHO Network of Secondary Standards Dosimetry Laboratories

    NASA Astrophysics Data System (ADS)

    Meghzifene, Ahmed; Czap, Ladislav; Shortt, Ken

    2008-08-01

    The International Atomic Energy Agency (IAEA) and the World Health Organization (WHO) established a Network of Secondary Standards Dosimetry Laboratories (IAEA/WHO SSDL Network) in 1976. Through SSDLs designated by Member States, the Network provides a direct link of national dosimetry standards to the international measurement system of standards traceable to the Bureau International des Poids et Mesures (BIPM). Within this structure and through the proper calibration of field instruments, the SSDLs disseminate S.I. quantities and units. To ensure that the services provided by SSDL members to end-users follow internationally accepted standards, the IAEA has set up two different comparison programmes. One programme relies on the IAEA/WHO postal TLD service and the other uses comparisons of calibrated ionization chambers to help the SSDLs verify the integrity of their national standards and the procedures used for the transfer of the standards to the end-users. The IAEA comparisons include 60Co air kerma (NK) and absorbed dose to water (ND,W) coefficients. The results of the comparisons are confidential and are communicated only to the participants. This is to encourage participation of the laboratories and their full cooperation in the reconciliation of any discrepancy. This work describes the results of the IAEA programme comparing calibration coefficients for radiotherapy dosimetry, using ionization chambers. In this programme, ionization chambers that belong to the SSDLs are calibrated sequentially at the SSDL, at the IAEA, and again at the SSDL. As part of its own quality assurance programme, the IAEA has participated in several regional comparisons organized by Regional Metrology Organizations. The results of the IAEA comparison programme show that the majority of SSDLs are capable of providing calibrations that fall inside the acceptance level of 1.5% compared to the IAEA.

  1. Proficiency Testing as a tool to monitor consistency of measurements in the IAEA/WHO Network of Secondary Standards Dosimetry Laboratories

    SciTech Connect

    Meghzifene, Ahmed; Czap, Ladislav; Shortt, Ken

    2008-08-14

    The International Atomic Energy Agency (IAEA) and the World Health Organization (WHO) established a Network of Secondary Standards Dosimetry Laboratories (IAEA/WHO SSDL Network) in 1976. Through SSDLs designated by Member States, the Network provides a direct link of national dosimetry standards to the international measurement system of standards traceable to the Bureau International des Poids et Mesures (BIPM). Within this structure and through the proper calibration of field instruments, the SSDLs disseminate S.I. quantities and units.To ensure that the services provided by SSDL members to end-users follow internationally accepted standards, the IAEA has set up two different comparison programmes. One programme relies on the IAEA/WHO postal TLD service and the other uses comparisons of calibrated ionization chambers to help the SSDLs verify the integrity of their national standards and the procedures used for the transfer of the standards to the end-users. The IAEA comparisons include {sup 60}Co air kerma (N{sub K}) and absorbed dose to water (N{sub D,W}) coefficients. The results of the comparisons are confidential and are communicated only to the participants. This is to encourage participation of the laboratories and their full cooperation in the reconciliation of any discrepancy.This work describes the results of the IAEA programme comparing calibration coefficients for radiotherapy dosimetry, using ionization chambers. In this programme, ionization chambers that belong to the SSDLs are calibrated sequentially at the SSDL, at the IAEA, and again at the SSDL. As part of its own quality assurance programme, the IAEA has participated in several regional comparisons organized by Regional Metrology Organizations.The results of the IAEA comparison programme show that the majority of SSDLs are capable of providing calibrations that fall inside the acceptance level of 1.5% compared to the IAEA.

  2. The impact of transition training on adapting to Technically Advanced Aircraft at regional airlines: Perceptions of pilots and instructor pilots

    NASA Astrophysics Data System (ADS)

    di Renzo, John Carl, Jr.

    Scope and method of study. The purpose of this study was to test a hypothesis about pilot and instructor pilot perceptions of how effectively pilots learn and use new technology, found in Technically Advanced Aircraft (TAA), given initial type of instrumentation training. New aviation technologies such as Glass Cockpits in technically advanced aircraft are complex and can be difficult to learn and use. The research questions focused on the type of initial instrumentation training to determine the differences among pilots trained using various types of instrumentation ranging from aircraft equipped with traditional analog instrumentation to aircraft equipped with glass cockpits. A convenience sample of Pilots in Training (PT) and Instructor Pilots (IP) was selected from a regional airline. The research design used a mixed methodology. Pilots in training completed a thirty-two question quantitative questionnaire and instructor pilots completed a five question qualitative questionnaire. Findings and conclusions. This investigation failed to disprove the null hypothesis. The type of instrumentation training has no significant effect on newly trained regional airline pilot perceived ability to adapt to advanced technology cockpits. Therefore, no evidence exists from this investigation to support the early introduction and training of TAA. While the results of this investigation were surprising, they are nonetheless, instructive. Even though it would seem that there would be a relationship between exposure to and use of technically advanced instrumentation, apparently there was no perceived relationship for this group of airline transport pilots. However, a point of interest is that these pilots were almost evenly divided in their opinion of whether or not their previous training had prepared them for transition to TAA. The majority also believed that the type of initial instrumentation training received does make a difference when transitioning to TAA. Pilots believed

  3. Geochemistry and origin of regional dolomites. Technical progress report, July 26, 1991--April 21, 1992

    SciTech Connect

    Hanson, G.N.; Meyers, W.J.

    1992-07-01

    This grant supports research on the origins and geochemical aspects of regional dolomites. Eight graduate students are involved in research on dolomite allowing a diverse range of studies. This report outlines their work in the field. (JL)

  4. [Regional electro-hyperthermia--technical principles, clinical results and health insurance aspects].

    PubMed

    Heyll, Uwe

    2012-06-01

    The method of electro-hyperthermia is based on the production of alternating currents from capacitive coupled electrodes. Because of the associated heating of body tissues, the electro-hyperthermia is promoted as an alternative to the more sophisticated methods of scientific hyperthermia, which find use in oncologic diseases. The analysis of technical data, however, reveals that the electro-hyperthermia is not qualified for a focused, effective and therapeutically useful heating of circumscribed target areas. Data from clinical studies demonstrating efficacy for defined indications are not available. The application of electro-hyperthermia is excluded form the German system of public health insurance. As proof of medical necessity cannot be provided, there is also no claim for reimbursement from private health insurance. According to legal regulations in Germany, an invoice as hyperthermia treatment is usually not possible. Rather, an item from the electrotherapy section of the official provision of medical fees (GOA) has to be chosen. PMID:22808643

  5. Social and economic assessment: A technical report used in amending the Rocky Mountain regional guide

    SciTech Connect

    Not Available

    1992-05-01

    The purpose of the Socio-economic Assessment is threefold in nature: to describe the socio-economic forces at work within the rural and urban areas throughout the Rocky Mountain Region (the Region); to develop social and economic profiles for the Region as a whole and each of its eight subregions; and, finally, to describe the potential impacts of the above mentioned forces on the Region and to make recommendations for developing future strategies to facilitate coordination between the Forest Service, the various state, local, and other federal agencies, and Native American Indian tribes. This project involved the analysis of various social and economic variables in an attempt to determine the social and economic situation in the Rocky Mountain Region, and how it has been altered over the last three decades. To this end, data was collected on demographic changes, income growth, employment and unemployment, payrolls, number and size of firms, and SIC industrial breakdowns for various industries within each subregion and economic impact area.

  6. 76 FR 55364 - Request for Information: Technical Inputs and Assessment Capacity Related to Regional, Sectoral...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-09-07

    ... Federal Register on Wednesday, July 13, 2011 (76 FR 41217). This RFI sought comments and expressions of... original Federal Register Notice of a Request for Information at 76 FR 41217 (July 13, 2011), or the United... Capacity Related to Regional, Sectoral, and Cross-Cutting Assessments for the 2013 U.S. National...

  7. Mid-Atlantic Region Special Education Instructional Materials Center. Final Technical Report.

    ERIC Educational Resources Information Center

    Cottrell, Raymond S.; Carter, Robert

    The final report of the Mid-Atlantic Region Special Education Instructional Materials Center (MAR-SEIMC) describes field services, information services, library services, and research and evaluation activities conducted from 1967 to August 1974. It is explained that 39 affiliate centers were established throughout Pennsylvania, New Jersey,…

  8. Reforming Education in the Regions of Russia. World Bank Technical Paper No. 457.

    ERIC Educational Resources Information Center

    Canning, Mary; Moock, Peter; Heleniak, Timothy

    After the breakup of the Soviet Union, reforms of Russia's educational system included rapid decentralization of responsibilities to the regions, but without commensurate transfer of resources or clarification of government roles and responsibilities. Problems were greatly worsened by the severe fiscal stringency of the 1990s. This paper examines…

  9. PREFACE: 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and 21st IAEA TM on Research Using Small Fusion Devices (RUSFD)

    NASA Astrophysics Data System (ADS)

    Iván Vargas-Blanco, V.; Herrera-Velázquez, J. Julio E.

    2015-03-01

    Written contributions from participants of the Joint 15th Latin American Workshop on Plasma Physics (LAWPP 2014) - 21st IAEA Technical Meeting on Research Using Small Fusion Devices (21st IAEA TM RUSFD). The International Advisory Committees of the 15th Latin American Workshop on Plasma Physics (LAWPP 2014) and the 21st IAEA TM on Research Using Small Fusion Devices (RUSFD), agreed to carry out together this Joint LAWPP 2014 - 21st RUSFD in San José, Costa Rica, on 27-31 January 2014. The Joint LAWPP 2014 - 21st RUSFD meeting, organized by the Instituto Tecnológico de Costa Rica, Universidad Nacional de Costa Rica, and Ad Astra Rocket Company in collaboration with the International Atomic Energy Agency (IAEA). The Latin American Workshop on Plasma Physics (LAWPP) is a series of events which has been held periodically since 1982, with the purpose of providing a forum in which the research of the Latin American plasma physics community can be displayed, as well as fostering collaborations among plasma scientists within the region and with researchers from the rest of the world. Recognized plasma scientists from developed countries are specially invited to the meeting to present the state of the art on several "hot" topics related to plasma physics. It is an open meeting, with an International Advisory Committee, in which the working language is English. It was firstly held in 1982 in Cambuquira, Brazil, followed by workshops in Medellín, Colombia (1985), Santiago de Chile, Chile (1988), Buenos Aires, Argentina (1990), Mexico City, Mexico (1992), Foz do Iguaçu, Brazil (1994, combined with the International Congress on Plasma Physics (ICPP)), Caracas, Venezuela (1997), Tandil, Argentina (1998), La Serena, Chile (2000), Sao Pedro, Brazil (2003), Mexico City, Mexico (2005), Caracas, Venezuela (2007), Santiago de Chile, Chile (2010, combined with the ICPP) and Mar de Plata, Argentina (2011). The 21st IAEA TM on Research Using Small Fusion Devices is an ideal forum for

  10. Containment and surveillance -- A principal IAEA safeguards measure

    SciTech Connect

    Drayer, D.D.; Dupree, S.A.; Sonnier, C.S.

    1997-12-31

    The growth of the safeguards inspectorate of the Agency, spanning more than 40 years, has produced a variety of interesting subjects (legal, technical, political, etc.) for recollection, discussion, and study. Although the Agency was established in 1957, the first practical inspections did not occur until the early 1960s. In the early inspections, thee was little C/S equipment available, and no optical surveillance was used. However, by the third decade of the IAEA, the 1980s, many technology advances were made, and the level of C/S equipment activities increased. By the late 1980s, some 200 Twin Minolta film camera systems were deployed by the Agency for safeguards use. At the present time, the Agency is evaluating and beginning to implement remote monitoring as part of the Strengthened Safeguards System. However, adoption of remote monitoring by international agencies cannot occur rapidly because of the many technical and policy issues associated with this activity. A glimpse into the future indicates that an important element of safeguards instrumentation will be the merging of C/S and NDA equipment into integrated systems. The use of modern interior area monitors in International Safeguards also offers a great potential for advancing C/S measures. The research in microsensors is in its infancy, and the opportunities for their reducing the cost, increasing the life time, and increasing the reliability of sensors for safeguards applications are manifold. A period may be approaching in which the terminology of C/S will no longer have its original meaning, as integrated systems combining NDA instruments and C/S instruments are already in use and are expected to be the norm in the near future.

  11. Reference dosimeter system of the iaea

    NASA Astrophysics Data System (ADS)

    Mehta, Kishor; Girzikowsky, Reinhard

    1995-09-01

    Quality assurance programmes must be in operation at radiation processing facilities to satisfy national and international Standards. Since dosimetry has a vital function in these QA programmes, it is imperative that the dosimetry systems in use at these facilities are well calibrated with a traceability to a Primary Standard Dosimetry Laboratory. As a service to the Member States, the International Atomic Energy Agency operates the International Dose Assurance Service (IDAS) to assist in this process. The transfer standard dosimetry system that is used for this service is based on ESR spectrometry. The paper describes the activities undertaken at the IAEA Dosimetry Laboratory to establish the QA programme for its reference dosimetry system. There are four key elements of such a programme: quality assurance manual; calibration that is traceable to a Primary Standard Dosimetry Laboratory; a clear and detailed statement of uncertainty in the dose measurement; and, periodic quality audit.

  12. A Report to the U.S. Department of Education on Educational Challenges and Technical Assistance Needs for the Pacific Region

    ERIC Educational Resources Information Center

    CNA Corporation, 2005

    2005-01-01

    This report of the Pacific Regional Advisory Committee (RAC) provides an assessment of the technical assistance needs of educators in the Pacific region in response to a directive from the Secretary of the U.S. Department of Education (ED). This information will be used to assist in the establishment of 20 comprehensive centers providing technical…

  13. A Report to the U.S. Department of Education on Educational Challenges and Technical Assistance Needs for the Mid-Continent Region

    ERIC Educational Resources Information Center

    CNA Corporation, 2005

    2005-01-01

    The Mid-Continent Regional Advisory Committee (RAC) provides an assessment of the technical assistance needs of educators in our region in response to a directive from the Secretary of the U.S. Department of Education. This RAC is one of ten such committees appointed by the Secretary to conduct the assessment over the period of December 2004…

  14. Facilitation of the Estuary/Ocean Subgroup and the Expert Regional Technical Group, Annual Report for 2015

    SciTech Connect

    Johnson, Gary E.

    2015-08-01

    This document is the annual report for the period September 1, 2014 through August 31, 2015 for the project—Facilitation of the Estuary/Ocean Subgroup (EOS) and the Expert Regional Technical Group (ERTG). Pacific Northwest National Laboratory (PNNL) conducted the project for the Bonneville Power Administration (BPA). The EOS and ERTG are part of the research, monitoring, and evaluation (RME) and habitat restoration efforts, respectively, developed by the Action Agencies (BPA, U.S. Army Corps of Engineers [Corps or USACE], and U.S. Bureau of Reclamation) in response to obligations arising from the Endangered Species Act as a result of operation of the Federal Columbia River Power System (FCRPS) and implemented under the Columbia Estuary Ecosystem Restoration Program (CEERP). BPA/Corps (2015) explain the CEERP and the role of RME and the ERTG. For the purposes of this report, the lower Columbia River and estuary (LCRE) includes the floodplain from Bonneville Dam down through the lower river and estuary into the river’s plume in the ocean. The main purpose of this project is to facilitate EOS and ERTG meetings and work products. Other purposes are to provide technical support for CEERP adaptive management, CEERP restoration design challenges, and tributary RME. From 2002 through 2008, the EOS worked to design the federal RME program for the estuary/ocean (Johnson et al. 2008). From 2009 to the present day, EOS activities have involved RME implementation; however, EOS activities were minimal during the current reporting period. PNNL provided technical support to CEERP’s adaptive management process by convening 1.2 meetings of the Action Agencies (AAs) and drafting material for the “CEERP 2015 Restoration and Monitoring Plan” (BPA/Corps 2015).

  15. Pioneer exotic tree search for the douglas-fir region. Forest Service general technical report

    SciTech Connect

    Silen, R.R.; Olson, D.L.

    1992-03-01

    After three-quarters of a century of introduction of 152 conifer and broadleaf species, no promising candidate exotic was found for the Douglas-fir region. Growth curves spanning 50 years or longer are figured for many species. Firs, pines, larches, spruces, hemlocks, and cedars orginating in northwestern North America had superior growth rates to those from other forest regions. The probable basis for these differences is discussed. The record highlights a general failure of introduced hardwoods, the slow decline of most introduced conifers, the long time needed to express failures, dramatic effects of climatic extremes or introduced pests, failure of native species of continental origin at Wind River, striking similarities of growth rate for the species originating in each country, and many important contrasts between results from early reports and long-term conclusions.

  16. Conceptual model for regional radionuclide transport from a salt dome repository: a technical memorandum

    SciTech Connect

    Kier, R.S.; Showalter, P.A.; Dettinger, M.D.

    1980-05-30

    Disposal of high-level radioactive wastes is a major environmental problem influencing further development of nuclear energy in this country. Salt domes in the Gulf Coast Basin are being investigated as repository sites. A major concern is geologic and hydrologic stability of candidate domes and potential transport of radionuclides by groundwater to the biosphere prior to their degradation to harmless levels of activity. This report conceptualizes a regional geohydrologic model for transport of radionuclides from a salt dome repository. The model considers transport pathways and the physical and chemical changes that would occur through time prior to the radionuclides reaching the biosphere. Necessary, but unknown inputs to the regional model involve entry and movement of fluids through the repository dome and across the dome-country rock interface and the effect on the dome and surrounding strata of heat generated by the radioactive wastes.

  17. Connecticut Highlands Technical Report - Documentation of the Regional Rainfall-Runoff Model

    USGS Publications Warehouse

    Ahearn, Elizabeth A.; Bjerklie, David M.

    2010-01-01

    This report provides the supporting data and describes the data sources, methodologies, and assumptions used in the assessment of existing and potential water resources of the Highlands of Connecticut and Pennsylvania (referred to herein as the “Highlands”). Included in this report are Highlands groundwater and surface-water use data and the methods of data compilation. Annual mean streamflow and annual mean base-flow estimates from selected U.S. Geological Survey (USGS) gaging stations were computed using data for the period of record through water year 2005. The methods of watershed modeling are discussed and regional and sub-regional water budgets are provided. Information on Highlands surface-water-quality trends is presented. USGS web sites are provided as sources for additional information on groundwater levels, streamflow records, and ground- and surface-water-quality data. Interpretation of these data and the findings are summarized in the Highlands study report.

  18. Technical NoteEarthquake dates and water level changes in wells in the Eskisehir region, Turkey

    NASA Astrophysics Data System (ADS)

    Yuce, G.; Ugurluoglu, D.

    Although satisfactory results have yet to be obtained in earthquake prediction, one of the most common indicators of an anomalous precursor is a change in groundwater level in existing wells. Further wells should thus be drilled in unconfined aquifers since these are more susceptible to seismic waves. The Eskisehir region lies in the transition zone between the Aegean extensional domain and the compressible northern Anatolian block. Limnigraphs, installed in 19 exploration wells in the Eskisehir region, recorded pre-seismic, co-seismic and post-seismic level changes during the earthquakes of 17 August Izmit (Mw= 7.4) and 12 November Duzce (Mw= 7.2) 1999 that occurred along the North Anatolian Fault Zone. The Izmit and Duzce earthquakes affected groundwater levels, especially in confined aquifers. The aquifer characteristics before and after the earthquakes were unchanged so the aquifer is elastic in its behaviour. Further detailed geo-mechanical investigation of the confined aquifer in the Eskisehir region may improve understanding of earthquake prediction.

  19. Facilitation of the Estuary/Ocean Subgroup and the Expert Regional Technical Group, Fiscal Year 2013 Annual Report

    SciTech Connect

    Johnson, Gary E.; Sather, Nichole K.

    2013-10-30

    This project covers facilitation of the Estuary/Ocean Subgroup (EOS) for federal research, monitoring, and evaluation (RME) and the Expert Regional Technical Group (ERTG) for estuary habitat restoration. The EOS is part of the research, monitoring, and evaluation effort that the Action Agencies (Bonneville Power Administration [BPA], U.S. Army Corps of Engineers [Corps], U.S. Bureau of Reclamation) developed in response to obligations arising from the Endangered Species Act as applied to operation of the Federal Columbia River Power System (FCRPS). The EOS is tasked by National Marine Fisheries Service (NMFS) and the Action Agencies (AAs) to design and coordinate implementation of the federal RME plan for the lower Columbia River and estuary, including the river’s plume in the ocean. Initiated in 2002, the EOS is composed of members from BPA, the Corps, NMFS, and Pacific Northwest National Laboratory’s (PNNL’s) Marine Sciences Laboratory, and other agencies as necessary.

  20. Stratified precambrian rocks (sedimentary?) beneath the midcontinent region of the US. Final technical report

    SciTech Connect

    Hauser, E.C.

    1993-02-01

    A thick sequence of layered rocks occurs beneath the Phanerozoic platform strata which blanket the US midcontinent. Observed on COCORP deep reflection data in southern Illinois and Indiana and in SW Oklahoma and adjacent Texas, this sequence is locally 1--3 times as thick as the overlying Paleozoic cover, but the origin of this sequence and its ultimate lateral extent are unknown. However, the occurrences of Precambrian layered rocks on both the COCORP profiles and reprocessed industry seismic reflection data from the region lie within regions of generally low amplitude and low frequency aeromagnetic anomaly, suggesting an even greater distribution. Unmetamorphosed Precambrian sedimentary rocks have been recovered from drill holes in southwest Ohio and adjacent northern Kentucky and southwesternmost Indiana. These Precambrian sedimentary rocks lie above and may be part of an underlying package of strongly layered rocks imaged on a short and shallow seismic profile in southwest Ohio. These Precambrian sedimentary rocks were originally viewed as part of a late Precambrian (Keweenawan?) rift; however, in light of Grenville foreland structures seen on the COCORP profile to the north in west central Ohio, these Precambrian strata may (1) be part of a heretofore unrecognized Grenville foreland basin, or (2) indicate that unmetamorphosed Precambrian sedimentary material may be an important constituent of the layered rocks observed on COCORP beneath southern Illinois and Indiana.

  1. A device for cooling localized regions of human cerebral cortex. Technical note.

    PubMed

    Bakken, Hans E; Kawasaki, Hiroto; Oya, Hiroyuki; Greenlee, Jeremy D W; Howard, Matthew A

    2003-09-01

    Neurosurgeons use invasive mapping methods during surgery to understand the functional neuroanatomy of patients. Electrical stimulation methods are used routinely for the temporary disruption of focal regions of cerebral cortex so that the surgeon may infer the functional role of the brain site being stimulated. Although it is an efficient and useful method, modes of electrical stimulation mapping have significant limitations. Neuroscientists use focal cooling to effect a more controlled disruption of cortical functions in experimental animals, and in this report, the authors describe their experience using a device to achieve this same objective in patients undergoing neurosurgery. The cooling probe consists of a stainless steel chamber with thermocouples and electroencephalography (EEG) recording contacts. Active cooling is achieved by infusing chilled saline into the chamber when the cooling probe is positioned on the pial surface. Experiments were performed in 18 patients. Temperature gradient measurements indicate that the entire thickness of gray matter under the probe is cooled to temperatures that disrupt local synaptic activity. Statistically significant changes in spontaneous and stimulus-evoked EEG activity were consistently observed during cooling, providing clear evidence of reversible disruption of physiological functions. Preliminary findings during functional mapping of the Broca area demonstrated qualitative differences between the temporary neurological deficits induced by cooling and those caused by electrical stimulation. These findings indicate the safety and utility of the cooling probe as a neurosurgical research tool. Additional rigorously designed studies should be undertaken to correlate the effects of cooling, electrical stimulation, and focal lesioning. PMID:12959453

  2. IAEA Inspections for Undeclared and Declared Activities: Is a More Robust Approach Needed?

    SciTech Connect

    Mark Schanfein

    2009-07-01

    The United States has long supported a strong international safeguards system and for many years has served as the foremost supplier of technology, equipment, and training to the International Atomic Energy Agency (IAEA). In doing so, it drew in many instances on DOE sponsored R&D and training that was directed towards domestic safeguards and then adapted for IAEA purposes. This was relatively straightforward because of the strong overlap between the development of nuclear material accountancy measures needed for both domestic and international purposes. Two factors have emerged that have made this strong reliance on domestic measures less and less able to be a source of support for the IAEA. One is the shift by the IAEA safeguards system towards detecting undeclared activities. The second is the shift of domestic attention away from nuclear material accountancy and towards physical protection. As a result, a gap in US sponsored R&D and training relevant to international safeguards has developed. The NNSA Next Generation Safeguards Initiative and the DOE NA-22 Safeguards R&D program are intended to help fill this gap and, thereby, permit the U.S. to remain as the pre-eminent supplier of technology for international safeguards purposes. In this context, IAEA challenges have been examined from the perspective of detecting the diversion of nuclear material from declared stocks; detecting undeclared production of nuclear material and activities at locations declared under INFCIRC/153; and detecting undeclared nuclear material and activities elsewhere in a state. Of these, the detection of undeclared nuclear material and activities is, perhaps, the IAEA’s most significant challenge. It is a challenge that even the international community finds difficult to meet because of the scope and the geographic scale of the problem, the technical constraints, the knowledge required, and the significant resources needed to deploy effective systems world-wide (e.g., satellite

  3. Nonproliferation, Disarmament, and the IAEA in Tomorrow's World

    SciTech Connect

    Cooley, Jill

    2008-09-08

    International Atomic Energy Agency (IAEA) safeguards have evolved considerably during the last five decades and have become an integral part of the international non-proliferation regime and the global security system. To carry on serving well the international community, they need to continue to move with the times -- especially in light of the renewed interest in nuclear energy and its projected expansion in the coming years, which could bring additional nuclear facilities, material and activities under IAEA safeguards. The projected nuclear ˜renaissance" may pose increased proliferation risks as nuclear material, technology and know-how spread in an increasingly globalized world. The presentation will provide an overview of the IAEA safeguards system and describe current verification challenges and potential new IAEA roles.

  4. Potential for meeting IAEA safeguards goals for reprocessing

    SciTech Connect

    Bambas, K.J.

    1980-09-01

    The author concludes that: Safeguards which allow the meeting of IAEA uranium and plutonium diversion detection goals for large-scale reprocessing plants are achievable. Concepts exists for ways in which IAEA inspectors could verify data received from operations of such facilities. Additional work is needed, particularly in the futher development of on-line instruments. Computerized near real-time accounting systems may provide significant operational benefits in addition to being required for safeguards purposes.

  5. Certified reference materials for radionuclides in Bikini Atoll sediment (IAEA-410) and Pacific Ocean sediment (IAEA-412).

    PubMed

    Pham, M K; van Beek, P; Carvalho, F P; Chamizo, E; Degering, D; Engeler, C; Gascó, C; Gurriaran, R; Hanley, O; Harms, A V; Herrmann, J; Hult, M; Ikeuchi, Y; Ilchmann, C; Kanisch, G; Kis-Benedek, G; Kloster, M; Laubenstein, M; Llaurado, M; Mas, J L; Nakano, M; Nielsen, S P; Osvath, I; Povinec, P P; Rieth, U; Schikowski, J; Smedley, P A; Suplinska, M; Sýkora, I; Tarjan, S; Varga, B; Vasileva, E; Zalewska, T; Zhou, W

    2016-03-01

    The preparation and characterization of certified reference materials (CRMs) for radionuclide content in sediments collected offshore of Bikini Atoll (IAEA-410) and in the open northwest Pacific Ocean (IAEA-412) are described and the results of the certification process are presented. The certified radionuclides include: (40)K, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (232)Th, (234)U, (238)U, (239)Pu, (239+240)Pu and (241)Am for IAEA-410 and (40)K, (137)Cs, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (232)Th, (235)U, (238)U, (239)Pu, (240)Pu and (239+240)Pu for IAEA-412. The CRMs can be used for quality assurance and quality control purposes in the analysis of radionuclides in sediments, for development and validation of analytical methods and for staff training.

  6. Certified reference materials for radionuclides in Bikini Atoll sediment (IAEA-410) and Pacific Ocean sediment (IAEA-412).

    PubMed

    Pham, M K; van Beek, P; Carvalho, F P; Chamizo, E; Degering, D; Engeler, C; Gascó, C; Gurriaran, R; Hanley, O; Harms, A V; Herrmann, J; Hult, M; Ikeuchi, Y; Ilchmann, C; Kanisch, G; Kis-Benedek, G; Kloster, M; Laubenstein, M; Llaurado, M; Mas, J L; Nakano, M; Nielsen, S P; Osvath, I; Povinec, P P; Rieth, U; Schikowski, J; Smedley, P A; Suplinska, M; Sýkora, I; Tarjan, S; Varga, B; Vasileva, E; Zalewska, T; Zhou, W

    2016-03-01

    The preparation and characterization of certified reference materials (CRMs) for radionuclide content in sediments collected offshore of Bikini Atoll (IAEA-410) and in the open northwest Pacific Ocean (IAEA-412) are described and the results of the certification process are presented. The certified radionuclides include: (40)K, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (232)Th, (234)U, (238)U, (239)Pu, (239+240)Pu and (241)Am for IAEA-410 and (40)K, (137)Cs, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (232)Th, (235)U, (238)U, (239)Pu, (240)Pu and (239+240)Pu for IAEA-412. The CRMs can be used for quality assurance and quality control purposes in the analysis of radionuclides in sediments, for development and validation of analytical methods and for staff training. PMID:26631455

  7. The Status of the Preparation and Hiring of School Principals in the U.S.-Affiliated Pacific Region. REL Technical Brief. REL 2008-No. 006

    ERIC Educational Resources Information Center

    Camblin, Sharon; Keir, Scott

    2008-01-01

    This technical brief describes the current status of the preparation and hiring of school principals in the Pacific Region--American Samoa, Guam, Hawaii, Republic of the Marshall Islands, Federated States of Micronesia (Chuuk, Kosrae, Pohnpei, and Yap), Commonwealth of the Northern Mariana Islands, and Republic of Palau. The brief answers the…

  8. Recommended observational skills training for IAEA safeguards inspections. Final report: Recommended observational skills training for IAEA safeguards inspections

    SciTech Connect

    Toquam, J.L.; Morris, F.A.

    1994-09-01

    This is the second of two reports prepared to assist the International Atomic Energy Agency (IAEA or Agency) in enhancing the effectiveness of its international safeguards inspections through inspector training in {open_quotes}Observational Skills{close_quotes}. The first (Phase 1) report was essentially exploratory. It defined Observational Skills broadly to include all appropriate cognitive, communications, and interpersonal techniques that have the potential to help IAEA safeguards inspectors function more effectively. It identified 10 specific Observational Skills components, analyzed their relevance to IAEA safeguards inspections, and reviewed a variety of inspection programs in the public and private sectors that provide training in one or more of these components. The report concluded that while it should be possible to draw upon these other programs in developing Observational Skills training for IAEA inspectors, the approaches utilized in these programs will likely require significant adaption to support the specific job requirements, policies, and practices that define the IAEA inspector`s job. The overall objective of this second (Phase 2) report is to provide a basis for the actual design and delivery of Observational Skills training to IAEA inspectors. The more specific purposes of this report are to convey a fuller understanding of the potential application of Observational Skills to the inspector`s job, describe inspector perspectives on the relevance and importance of particular Observational Skills, identify the specific Observational Skill components that are most important and relevant to enhancing safeguards inspections, and make recommendations as to Observational Skills training for the IAEA`s consideration in further developing its Safeguards training program.

  9. Measurement of ²²⁶Ra in soil from oil field: advantages of γ-ray spectrometry and application to the IAEA-448 CRM.

    PubMed

    Ceccatelli, A; Katona, R; Kis-Benedek, G; Pitois, A

    2014-05-01

    The analytical performance of gamma-ray spectrometry for the measurement of (226)Ra in TENORM (Technically Enhanced Naturally Occurring Radioactive Material) soil was investigated by the IAEA. Fast results were obtained for characterization and certification of a new TENORM Certified Reference Material (CRM), identified as IAEA-448 (soil from oil field). The combined standard uncertainty of the gamma-ray spectrometry results is of the order of 2-3% for massic activity measurement values ranging from 16500 Bq kg(-1) to 21500 Bq kg(-1). Methodologies used for the production and certification of the IAEA-448 CRM are presented. Analytical results were confirmed by alpha spectrometry. The "t" test showed agreement between alpha and gamma results at 95% confidence level.

  10. Evolving a Regionally-Based Mechanism for the Provision of Technical Knowledge to SMEs: Lessons for Policy

    ERIC Educational Resources Information Center

    Lean, Jonathan; Tucker, Jonathan

    2005-01-01

    This paper describes and evaluates a pilot project undertaken in the South West of England to develop a computer-based system for facilitating effective technical knowledge transfer to small and mediumsized enterprises (SMEs). It explores the problem of technical knowledge transfer to SMEs, focusing in particular on the policy context. The…

  11. USSP-IAEA WORKSHOP ON ADVANCED SENSORS FOR SAFEGUARDS.

    SciTech Connect

    PEPPER,S.; QUEIROLO, A.; ZENDEL, M.; WHICHELLO, J.; ANNESE, C.; GRIEBE, J.; GRIEBE, R.

    2007-11-13

    The IAEA Medium Term Strategy (2006-2011) defines a number of specific goals in respect to the IAEA's ability to provide assurances to the international community regarding the peaceful use of nuclear energy through States adherences to their respective non-proliferation treaty commitments. The IAEA has long used and still needs the best possible sensors to detect and measure nuclear material. The Department of Safeguards, recognizing the importance of safeguards-oriented R&D, especially targeting improved detection capabilities for undeclared facilities, materials and activities, initiated a number of activities in early 2005. The initiatives included letters to Member State Support Programs (MSSPs), personal contacts with known technology holders, topical meetings, consultant reviews of safeguards technology, and special workshops to identify new and novel technologies and methodologies. In support of this objective, the United States Support Program to IAEA Safeguards hosted a workshop on ''Advanced Sensors for Safeguards'' in Santa Fe, New Mexico, from April 23-27, 2007. The Organizational Analysis Corporation, a U.S.-based management consulting firm, organized and facilitated the workshop. The workshop's goal was to help the IAEA identify and plan for new sensors for safeguards implementation. The workshop, which was attended by representatives of seven member states and international organizations, included presentations by technology holders and developers on new technologies thought to have relevance to international safeguards, but not yet in use by the IAEA. The presentations were followed by facilitated breakout sessions where the participants considered two scenarios typical of what IAEA inspectors might face in the field. One scenario focused on an enrichment plant; the other scenario focused on a research reactor. The participants brainstormed using the technologies presented by the participants and other technologies known to them to propose

  12. An Overview of IAEA Activities to Support Pre-disposal Management of Radioactive Wastes in Member States - 12334

    SciTech Connect

    Kumar Samanta, Susanta; Drace, Zoran; Ojovan, Michael

    2012-07-01

    The International Atomic Energy Agency (IAEA) promotes safe and effective management of radioactive waste and has suitable programmes in place to serve the needs of Member States in this area. These programmes cover the development and use of safety standards, planning, technologies and approaches needed for the management of different types of radioactive waste, resulting both from the nuclear fuel cycle and nuclear applications. In the pre-disposal area, the assistance to Members States covers a wide range of topics, including policy and strategy, inventory assessment, technologies and approaches for waste minimization, selection of technical options for waste processing and storage, improvement in operating practices at nuclear facilities, optimization of waste management capacity, etc. and is delivered through the publication of technical guidance documents, coordinated research projects, networks, technical cooperation projects and organization of training and technical review services. This report presents an overview of recent IAEA accomplishments aiming to support activities in pre-disposal management of radioactive waste with focus on technological aspects. (authors)

  13. Reducing the risks from radon indoors: an IAEA perspective.

    PubMed

    Boal, T; Colgan, P A

    2014-07-01

    The IAEA has a mandate to develop, in collaboration with other relevant international organisations, 'standards of safety for protection of health and minimisation of danger to life and property', and to provide for the application of these standards. The most recent edition of the International Basic Safety Standards includes, for the first time, requirements to protect the public from exposure due to radon indoors. As a result, the IAEA has already developed guidance material in line with accepted best international practice and an international programme to assist its Member States in identifying and addressing high radon concentrations in buildings is being prepared. This paper overviews the current situation around the world and summarises the management approach advocated by the IAEA. A number of important scientific and policy issues are identified and discussed from the point-of-view of how they may impact on national action plans and strategies. Finally, the assistance and support available through the Agency is described.

  14. Implementation of the IAEA Additional Protocol in the Philippines: USDOE/PNRI Cooperation

    SciTech Connect

    Sequis, Julietta E.; Cain, Ronald A.; Burbank, Roberta L.; Hansen, Linda H.; VanSickle, Matthew; Killinger, Mark H.; Elkhamri, Oksana O.

    2011-07-19

    The Philippines entered into force the International Atomic Energy Agency (IAEA) Additional Protocol (AP) in February 2010. The Philippine Nuclear Research Institute (PNRI) is the government agency responsible for implementing the AP. In June 2010 the IAEA invited the U.S. Department of Energy (DOE) to help conduct a joint national training seminar on the AP. DOE presented to PNRI its AP international technical assistance program, administered by the International Nuclear Safeguards and Engagement Program (INSEP), which helps partner countries implement the AP. In coordination with the IAEA, DOE established this program in 2008 to complement IAEA AP seminars with long-term country-specific cooperation from the perspective of a Member State. The US version of the AP is the same version as that of non-nuclear weapon states except for the addition of a national security exclusion. Due to this, DOE cooperation with other countries enables the sharing of valuable lessons learned in implementing the AP. DOE/INSEP described to PNRI the various areas of cooperation it offers to interested countries, whether they are preparing for entry into force or already implementing the AP. Even countries that have entered the AP into force are sometimes not fully prepared to implement it well, and welcome cooperation to improve their implementation process. PNRI and DOE/INSEP subsequently agreed to cooperate in several areas to enhance the efficiency and effectiveness of the Philippines AP implementation. These areas include providing working-level training to PNRI staff and preparing an information document that details that training for future reference, assisting with the development of an outreach program and procedures for AP reporting and complementary access, and identifying Annex II equipment and non-nuclear materials whose export must be reported under the AP. DOE laboratory representatives, funded by INSEP, met again with PNRI in February 2011 to provide training for PNRI AP

  15. Department of Energy Efforts to Promote Universal Adherence to the IAEA Additional Protocol

    SciTech Connect

    Killinger, Mark H.; Hansen, Linda H.; Kovacic, Don N.; VanSickle, Matthew; Apt, Kenneth E.

    2009-10-06

    Entry-into-force of the U.S. Additional Protocol (AP) in January 2009 continues to demonstrate the ongoing commitment by the United States to promote universal adherence to the AP. The AP is a critical tool for improving the International Atomic Energy Agency’s (IAEA) capabilities to detect undeclared activities that indicate a clandestine nuclear weapons program. This is because States Parties are required to provide information about, and access to, nuclear fuel cycle activities beyond their traditional safeguards reporting requirements. As part of the U.S. AP Implementation Act and Senate Resolution of Ratification, the Administration is required to report annually to Congress on measures taken to achieve the adoption of the AP in non-nuclear weapon states, as well as assistance to the IAEA to promote the effective implementation of APs in those states. A key U.S. effort in this area is being managed by the International Nuclear Safeguards and Engagement Program (INSEP) of the U.S. Department of Energy (DOE). Through new and existing bilateral cooperation agreements, INSEP has initiated technical assistance projects for AP implementation with selected non-weapon states. States with which INSEP is currently cooperating include Vietnam and Thailand, with Indonesia, Algeria, Morocco, and other countries as possible future collaborators in the area of AP implementation. The INSEP collaborative model begins with a joint assessment with our partners to identify specific needs they may have regarding entering the AP into force and any impediments to successful implementation. An action plan is then developed detailing and prioritizing the necessary joint activities. Such assistance may include: advice on developing legal frameworks and regulatory documents; workshops to promote understanding of AP requirements; training to determine possible declarable activities; assistance in developing a system to collect and submit declarations; performing industry outreach to

  16. United States of America activities relative to the International Atomic Energy Agency (IAEA) initiative: Records management for deep geologic repositories

    SciTech Connect

    Warner, P.J.

    1997-03-01

    The International Atomic Energy Agency (IAEA) has conducted consultant and advisory meetings to prepare a Technical Document which is intended to provide guidance to all IAEA Member States (otherwise known as countries) that are currently planning, designing, constructing or operating a deep or near surface geological repository for the storage and protection of vitrified high-level radioactive waste, spent fuel waste and TRU-waste (transuranic). Eleven countries of the international community are presently in various stages of siting, designing, or constructing deep geologic repositories. Member States of the IAEA have determined that the principle safety of such completed and operation sites must not rely solely on long term institutional arrangements for the retention of information. It is believed that repository siting, design, operation and postoperation information should be gathered, managed and retained in a manner that will provide information to future societies over a very long period of time. The radionuclide life is 10,000 years thus the retention of information must outlive current societies, languages, and be continually migrated to new technology to assure retrieval. This presentation will provide an overview of the status of consideration and implementation of these issues within the United States efforts relative to deep geologic repository projects.

  17. International Atomic Energy Agency (IAEA) Update on Spent Fuel Management Activities with Focus on Reprocessing

    SciTech Connect

    Lovasic, Z.

    2008-07-01

    The IAEA continues to give a high priority to safe and effective implementation of spent fuel management. As the options for spent fuel management may in the long term diversify due to evolving requirements and new priorities in strategic criteria, it is worthwhile identifying viable technical options for spent fuel treatment and their applicability to spent fuel management. The IAEA has issued several publications in the past that provide technical information on the global status and trends in spent fuel reprocessing and associated topics. The latest update of this information, collected from the experts in this field, covers currently available spent fuel reprocessing technologies as well as emerging technologies that are being investigated. The information exchange on advanced nuclear fuel cycles is also achieved through the International Project on Innovative Nuclear Reactors and Fuel Cycles (INPRO) initiated by IAEA. Substantial global growth of nuclear electricity generation is expected to occur during this century, in response to environmental issues and to assure the sustainability of the electrical energy supply in both industrial and less-developed countries. Recent initiatives by (IAEA, USA and Russia) are proposing the internationalization of the nuclear fuel cycle. These proposals imply a need for the development of innovative means for closure of the nuclear fuel cycle as advanced reactors (Generations III and IV) are deployed and as the quantities of material in the fuel cycle are set to increase to levels several times larger than at present. Spent fuel treatment/reprocessing options have evolved significantly since the start of nuclear energy application. There is a large body of industrial experience in fuel cycle technologies complemented by research and development programs in several countries. A number of options exist for the treatment of spent fuel. Some, including those that avoid separation of a pure plutonium stream, are at an advanced

  18. IAEA verification experiment at the Portsmouth Gaseous Diffusion Plant

    SciTech Connect

    Gordon, D.M.; Subudhi, M.; Calvert, O.L.; Bonner, T.N.; Adams, J.G.; Cherry, R.C.; Whiting, N.E.

    1998-08-01

    In April 1996, the United States (US) added the Portsmouth Gaseous Diffusion Plant to the list of facilities eligible for the application of International Atomic Energy Agency (IAEA) safeguards. At that time, the US proposed that the IAEA carry out a Verification Experiment at the plant with respect to the downblending of about 13 metric tons of highly enriched uranium (HEU) in the form of UF{sub 6}. This material is part of the 226 metric tons of fissile material that President Clinton has declared to be excess to US national-security needs and which will be permanently withdrawn from the US nuclear stockpile. In September 1997, the IAEA agreed to carry out this experiment, and during the first three weeks of December 1997, the IAEA verified the design information concerning the downblending process. The plant has been subject to short-notice random inspections since December 17, 1997. This paper provides an overview of the Verification Experiment, the monitoring technologies used in the verification approach, and some of the experience gained to date.

  19. Optimal radiotherapy utilisation rate in developing countries: An IAEA study.

    PubMed

    Rosenblatt, Eduardo; Barton, Michael; Mackillop, William; Fidarova, Elena; Cordero, Lisbeth; Yarney, Joel; Lim, Gerard; Abad, Anthony; Cernea, Valentin; Stojanovic-Rundic, Suzana; Strojan, Primoz; Kobachi, Lotfi; Quarneti, Aldo

    2015-07-01

    Optimal radiotherapy utilisation rate (RTU) is the proportion of all cancer cases that should receive radiotherapy. Optimal RTU was estimated for 9 Middle Income Countries as part of a larger IAEA project to better understand RTU and stage distribution. PMID:26164776

  20. Vocational-Technical Microcomputer Applications in Michigan and Bordering States (Upper Midwest Region). A Status Report: Summer 1984.

    ERIC Educational Resources Information Center

    Harris, Richard; Obert, Deborah

    In summer 1984, a study was conducted to assess the status of microcomputer applications in the public vocational-technical facilities of Michigan, Indiana, Minnesota, Illinois, Ohio, and Wisconsin. Mailing lists provided by the vocational education divisions of each state department of education were used to survey 705 individuals regarding…

  1. A Trend Analysis of Manufacturing-Related Program Graduates of Community and Technical Colleges: Great Lakes and Plains Regions

    ERIC Educational Resources Information Center

    Eighmy, Myron A.

    2009-01-01

    Manufacturers in the United States are struggling to recruit and hire high-skilled workers needed to maintain productivity and to compete globally. While the total number employed in the manufacturing sector is shrinking, the demand for high-skilled workers has increased. Community and technical colleges have traditionally been an important source…

  2. High School Students' Perception of Career Technical Education and Factors that Influence Enrollment in Programs at a Regional Occupational Center

    ERIC Educational Resources Information Center

    St. Gean, Laurie M.

    2010-01-01

    The purpose of this study was to learn about the demographic profile of South Bay-area high school Career Technical Education (CTE) students (those who enroll in CTE courses outside the school day), their perceptions related to CTE, the people and other factors that influence them to enroll in CTE courses, and students' opinions on which…

  3. Rapid development of tissue bank achieved by International Atomic Energy Agency (IAEA) Tissue Banking Programme in China.

    PubMed

    Zhang, Yu-Min; Wang, Jian-Ru; Zhang, Nai-Li; Liu, Xiao-Ming; Zhou, Mo; Ma, Shao-Ying; Yang, Ting; Li, Bao-Xing

    2014-09-01

    Before 1986, the development of tissue banking in China has been slow and relatively uncoordinated. Under the support of International Atomic Energy Agency (IAEA), Tissue Banking in China experienced rapid development. In this period, China Institute for Radiation Protection tissue bank mastered systematic and modern tissue banking technique by IAEA training course and gradually developed the first regional tissue bank (Shanxi Provincial Tissue Bank, SPTB) to provide tissue allograft. Benefit from training course, SPTB promoted the development of tissue transplantation by ways of training, brochure, advertisement and meeting. Tissue allograft transplantation acquired recognition from clinic and supervision and administration from government. Quality system gradually is developing and perfecting. Tissue allograft transplantation and tissue bank are developing rapidly and healthy.

  4. Assessment of Alternative Funding Mechanisms for the IAEA

    SciTech Connect

    Toomey, Christopher; Wyse, Evan T.; Kurzrok, Andrew J.; Ford, Benjamin E.

    2012-06-15

    While the International Atomic Energy Agency (IAEA) has enjoyed substantial success and prestige in the international community, there is growing concern that global demographic trends, advances in technology and the trend towards austerity in Member State budgets will stretch the Agency’s resources to a point where it may no longer be possible to execute its multifaceted mission in its entirety. As part of an ongoing effort by the Next Generation Safeguards Initiative to evaluate the IAEA’s long-term budgetary concerns , this paper proposes a series of alternate funding mechanisms that have the potential to sustain the IAEA in the long-term, including endowment, charity, and fee-for-service funding models.

  5. U.S.-MEXICO TECHNOLOGY TRANSFER; BILATERAL TECHNICAL EXCHANGES FOR SUSTAINABLE ECONOMIC GROWTH IN THE BORDER REGION

    SciTech Connect

    Jimenez, Richard, D., Dr.

    2007-10-01

    s challenging environmental issues. The results also brought focus to the potential contributions that DOE’s science and technology could make for solving the many difficult, multi-generational problems faced by hundreds of bi-national communities along the 2,000-mile shared border of the United States and Mexico. Efforts to address these U.S.-Mexico border issues were initially sponsored by the DOE’s Albuquerque and Carlsbad offices. In subsequent years, the U.S. Congress directed appropriations to DOE’s Carlsbad office to address public health, safety and security issues prevalent within U.S.-Mexico border communities. With ASL’s assistance, DOE’s Albuquerque office developed contacts and formed partnerships with interested U.S and Mexican government, academic, and commercial organizations. Border industries, industrial effluents, and public health conditions were evaluated and documented. Relevant technologies were then matched to environmental problem sets along the border. Several technologies that were identified and subsequently supported by this effort are now operational in a number of U.S.-Mexico border communities, several communities within Mexico’s interior states, and in other parts of Latin America. As a result, some serious public health threats within these communities caused by exposure to toxic airborne pollutants have been reduced. During this time, DOE’s Carlsbad office hosted a bilateral conference to establish a cross-border consensus on what should be done on the basis of these earlier investigative efforts. Participating border region stakeholders set an agenda for technical collaborations. This agenda was supported by several Members of Congress who provided appropriations and directed DOE’s Carlsbad office to initiate technology demonstration projects. During the following two years, more than 12 private-sector and DOE-sponsored technologies were demonstrated in partnership with numerous border community stakeholders. All technologies

  6. Normal D-region models for weapon-effects code. Technical report, 1 January-24 August 1985

    SciTech Connect

    Gambill

    1985-09-18

    This report examines several normal D-region models and their application to vlf/f propagation predictions. Special emphasis is placed on defining models that reproduce measured normal propagation data and also provide reasonable departure/recovery conditions after an ionospheric disturbance. An interim numerical model is described that provides for selection of a range of normal D-region electron profiles and also provides for a smooth transition to disturbed profiles. Requirements are also examined for defining prescribed D-region profiles using complex aero-chemistry models.

  7. Region VI Inservice Training for Vocational-Technical Personnel (Arlington, Texas, October 7-10, 1975). Conference Report.

    ERIC Educational Resources Information Center

    EPD Consortium D, Richardson, TX.

    This conference report contains a collection of thirteen papers delivered at the Region VI (New Mexico, Texas, Mississippi, Louisiana, and Oklahoma) inservice training conference, which focused on special needs groups (i.e., those with academic, socioeconomic, or physical handicaps that prevent them from succeeding in regular vocational programs).…

  8. Post-upgrade testing on a radiotherapy oncology information system with an embedded record and verify system following the IAEA Human Health Report No. 7 recommendations.

    PubMed

    Nyathi, Thulani; Colyer, Christopher; Bhardwaj, Anup Kumar; Rijken, James; Morton, Jason

    2016-06-01

    Record and verify (R&V) systems have proven that their application in radiotherapy clinics leads to a significant reduction in mis-treatments of patients. The purpose of this technical note is to share our experience of acceptance testing, commissioning and setting up a quality assurance programme for the MOSAIQ® oncology information system and R&V system after upgrading from software version 2.41 to 2.6 in a multi-vendor, multi-site environment. Testing was guided primarily by the IAEA Human Report No. 7 recommendations, but complemented by other departmental workflow specific tests. To the best of our knowledge, this is the first time successful implementation of the IAEA Human Health Report Series No. 7 recommendations have been reported in the literature. PMID:27245299

  9. Fully automated quantification of regional cerebral blood flow with three-dimensional stereotaxic region of interest template: validation using magnetic resonance imaging--technical note.

    PubMed

    Takeuchi, Ryo; Yonekura, Yoshiharu; Takeda, Shigenori Katayama Naoya; Fujita, Katsuzo; Konishi, Junji

    2003-03-01

    The previously reported three-dimensional stereotaxic region of interest (ROI) template (3DSRT-t) for the analysis of anatomically standardized technetium-99m-L,L-ethyl cysteinate dimer (99mTc-ECD) single photon emission computed tomography (SPECT) images was modified for use in a fully automated regional cerebral blood flow (rCBF) quantification software, 3DSRT, incorporating an anatomical standardization engine transplanted from statistical parametric mapping 99 and ROIs for quantification based on 3DSRT-t. Three-dimensional T2-weighted magnetic resonance images of 10 patients with localized infarcted areas were compared with the ROI contour of 3DSRT, and the positions of the central sulcus in the primary sensorimotor area were also estimated. All positions of the 20 lesions were in strict accordance with the ROI delineation of 3DSRT. The central sulcus was identified on at least one side of 210 paired ROIs and in the middle of 192 (91.4%) of these 210 paired ROIs among the 273 paired ROIs of the primary sensorimotor area. The central sulcus was recognized in the middle of more than 71.4% of the ROIs in which the central sulcus was identifiable in the respective 28 slices of the primary sensorimotor area. Fully automated accurate ROI delineation on anatomically standardized images is possible with 3DSRT, which enables objective quantification of rCBF and vascular reserve in only a few minutes using 99mTc-ECD SPECT images obtained by the RVR method.

  10. Deterring Nuclear Proliferation: The Importance of IAEA Safeguards: A TEXTBOOK

    SciTech Connect

    Rosenthal, M.D.; Fishbone, L.G.; Gallini, L.; Krass, A.; Kratzer, M.; Sanborn, J.; Ward, B.; Wulf, N. A.

    2012-03-13

    Nuclear terrorism and nuclear proliferation are among the most pressing challenges to international peace and security that we face today. Iran and Syria remain in non-compliance with the safeguards requirements of the NPT, and the nuclear ambitions of North Korea remain unchecked. Despite these challenges, the NPT remains a cornerstone of the nuclear non-proliferation regime, and the safeguards implemented by the International Atomic Energy Agency (IAEA) under the NPT play a critical role in deterring nuclear proliferation.How do they work? Where did they come from? And what is their future? This book answers these questions. Anyone studying the field of nuclear non-proliferation will benefit from reading this book, and for anyone entering the field, the book will enable them to get a running start. Part I describes the foundations of the international safeguards system: its origins in the 1930s - when new discoveries in physics made it clear immediately that nuclear energy held both peril and promise - through the entry into force in 1970 of the NPT, which codified the role of IAEA safeguards as a means to verify states NPT commitments not to acquire nuclear weapons. Part II describes the NPT safeguards system, which is based on a model safeguards agreement developed specifically for the NPT, The Structure and Content of Agreements between the Agency and States required in connection with the Treaty on the Non-Proliferation of Nuclear Weapons, which has been published by the IAEA as INFCIRC/153. Part III describes events, especially in South Africa, the DPRK, and Iraq in the early 1990s, that triggered a transformation in the way in which safeguards were conceptualized and implemented.

  11. Endoscope-Assisted Combined Supracerebellar Infratentorial and Endoscopic Transventricular Approach to the Pineal Region: A Technical Note.

    PubMed

    Felbaum, Daniel; Syed, Hasan R; Ryan, Joshua E; Jean, Walter C; Anaizi, Amjad

    2016-03-06

    Neoplasms of the pineal region comprise less than 2% of all intracranial lesions. A variety of techniques have been adapted to gain access to the pineal region. Classic approaches employ the use of the microscope. More recently, the endoscope has been utilized to improve access to such deep-seated lesions. A 62-year-old female presented with a heterogeneously enhancing lesion in the pineal region with associated hydrocephalus. On exam, the patient exhibited Parinaud's syndrome. The patient initially underwent a single burr hole endoscopic third ventriculostomy and biopsy of the lesion. Initial pathology was consistent with a grade III astrocytoma. Following a period of recuperation, she returned for definitive surgical resection. A suboccipital craniectomy was performed in the sitting position. Prior to dural opening, an endoscope was inserted into the right lateral ventricle through the prior burr hole.The endoscope was passed through the foramen of Monro and the tumor could be visualized along the posterior third ventricle. The patient underwent a standard supracerebellar infratentorial approach aided by the microscope. After initial debulking of the pineal lesion, an endoscope was utilized to guide the depth of resection and assist in dissection with transventricular manipulation of the tumor. During the final stages of resection from the craniotomy, the endoscope was used to help visualize the posterior supracerebellar corridor. This assisted in the assessment of the extent of resection. The endoscope was also utilized for the removal of intraventricular blood products following tumor resection. The patient was extubated and transferred to the intensive care unit. A postoperative contrast-enhanced magnetic resonance imaging (MRI) revealed greater than 95% resection, with expected residual within the midbrain. The combined supracerebellar infratentorial and transventricular endoscope-assisted approach provided maximum visualization and aided in optimal

  12. Radiation detectors as surveillance monitors for IAEA safeguards

    SciTech Connect

    Fehlau, P.E.; Dowdy, E.J.

    1980-10-01

    Radiation detectors used for personnel dosimetry are examined for use under IAEA Safeguards as monitors to confirm the passage or nonpassage (YES/NO) of plutonium-bearing nuclear material at barrier penetrations declared closed. In this application where backgrounds are ill defined, no advantage is found for a particular detector type because of intrinsic efficiency. Secondary considerations such as complexity, ease of tamper-proofing, and ease of readout are used to recommend specific detector types for routine monitoring and for data-base measurements. Recommendations are made for applications, data acquisition, and instrument development.

  13. [Nuclear energy and environment: review of the IAEA environmental projects].

    PubMed

    Fesenko, S; Fogt, G

    2012-01-01

    The review of the environmental projects of the International Atomic Energy Agency is presented. Basic IAEA documents intended to protect humans and the Environment are considered and their main features are discussed. Some challenging issues in the area of protection of the Environment and man, including the impact of nuclear facilities on the environment, radioactive waste management, and remediation of the areas affected by radiological accidents, nuclear testing and sites of nuclear facilities are also discussed. The need to maintain the existing knowledge in radioecology and protection of the environment is emphasised.

  14. Strengthening IAEA safeguards in an era of nuclear cooperation

    SciTech Connect

    Hooper, R.

    1995-11-01

    Since the end of the Cold War the world has witnessed a remarkable series of events demonstrating that universal adherence to the principles of nuclear non-proliferation and disarmament are no longer utopian dreams. The author reviews the actions of various countries to terminate or reduce nuclear weapons programs and those that are resisting the non-proliferation efforts. The author addresses efforts of the International Atomic Energy Agency (IAEA) to safeguard declared nuclear material more cost-effectively and deal with the possibility of undeclared nuclear activities.

  15. Thermal coal requirements and prospects for clean coal technologies in the Asia-Pacific Region. Final technical report, October 1994--September 1997

    SciTech Connect

    Johnson, C.J.

    1998-03-01

    The overall goal of the Cooperative Agreement (October 1994 to September 1997) was to provide general support and advice to the U.S. Department of Energy, Office of Fossil Energy (DOE/FE) on the likely opportunities for U.S. coal trade and potential for U.S. Clean Coal Technologies in the Asia-Pacific Region. Over the three year Cooperative Agreement, assistance evolved toward greater emphasis on support for the U.S. Department of Energy`s role as chair of the Asia-Pacific Economic Cooperation`s (APEC) Experts{close_quote} Group on Clean Fossil Energy. Responsibilities included assistance in arranging for all Technical Seminars, technical papers for these seminars and final editing, publishing and distribution of 500 copies of the proceedings. In addition, the East-West Center was called upon to host annual APEC Subcommittee Meetings, and periodic ad hoc planning meetings. The East-West Center played an active role in working with counterpart APEC and energy policy people throughout Asia, and advising the U.S. Department of Energy on options to enhance energy and Clean Coal Technology cooperation with various Asian nations, particularly People`s Republic of China (hereafter China) Towards the end of the Cooperative Agreement, increased emphasis was placed on the potential for gas fuels in Asian markets (natural gas, coalbed methane and gasification of coal).

  16. Progress and status of the IAEA coordinated research project: production of Mo-99 using LEU fission or neutron activation

    SciTech Connect

    Goldman, Ira N.; Adelfang, Pablo E-mail: P.Adelfang@iaea.org; Ramamoorthy, Natesan

    2008-07-15

    Since late 2004, the IAEA has developed and implemented a Coordinated Research Project (CRP) to assist countries interested in initiating indigenous, small-scale production of Mo-99 to meet local nuclear medicine requirements. The objective of the CRP is to provide interested countries with access to non-proprietary technologies and methods to produce Mo-99 using LEU foil or LEU mini-plate targets, or for the utilization of n,gamma neutron activation, e.g. through the use of gel generators. The project has made further progress since the RERTR 2006 meeting, with a Technical Workshop on Operational Aspects of Mo99 Production held 28-30 November 2006 in Vienna and the Second Research Coordination Meeting held in Bucharest, Romania 16-20 April 2007. The paper describes activities carried out as noted above, and as well as the provision of LEU foils to a number of participants, and the progress by a number of groups in preparing for LEU target assembly and disassembly, irradiation, chemical processing, and waste management. The participants' progress in particular on thermal hydraulics computations required for using LEU targets is notable, as also the progress in gel generator plant operations in India and Kazakhstan. Poland has joined as a new research agreement holder and an application by Egypt to be a contract holder is undergoing internal review in the IAEA and is expected to be approved. The IAEA has also participated in several open meetings of the U.S. National Academy of Sciences Study on Producing Medical Radioisotopes without HEU, which will also be discussed in the paper. (author)

  17. Endoscope-Assisted Combined Supracerebellar Infratentorial and Endoscopic Transventricular Approach to the Pineal Region: A Technical Note

    PubMed Central

    Syed, Hasan R; Ryan, Joshua E; Jean, Walter C; Anaizi, Amjad

    2016-01-01

    Neoplasms of the pineal region comprise less than 2% of all intracranial lesions. A variety of techniques have been adapted to gain access to the pineal region. Classic approaches employ the use of the microscope. More recently, the endoscope has been utilized to improve access to such deep-seated lesions. A 62-year-old female presented with a heterogeneously enhancing lesion in the pineal region with associated hydrocephalus. On exam, the patient exhibited Parinaud’s syndrome. The patient initially underwent a single burr hole endoscopic third ventriculostomy and biopsy of the lesion. Initial pathology was consistent with a grade III astrocytoma. Following a period of recuperation, she returned for definitive surgical resection. A suboccipital craniectomy was performed in the sitting position. Prior to dural opening, an endoscope was inserted into the right lateral ventricle through the prior burr hole.The endoscope was passed through the foramen of Monro and the tumor could be visualized along the posterior third ventricle. The patient underwent a standard supracerebellar infratentorial approach aided by the microscope. After initial debulking of the pineal lesion, an endoscope was utilized to guide the depth of resection and assist in dissection with transventricular manipulation of the tumor. During the final stages of resection from the craniotomy, the endoscope was used to help visualize the posterior supracerebellar corridor. This assisted in the assessment of the extent of resection. The endoscope was also utilized for the removal of intraventricular blood products following tumor resection. The patient was extubated and transferred to the intensive care unit. A postoperative contrast-enhanced magnetic resonance imaging (MRI) revealed greater than 95% resection, with expected residual within the midbrain. The combined supracerebellar infratentorial and transventricular endoscope-assisted approach provided maximum visualization and aided in optimal

  18. Training tissue bank operators: the International Atomic Energy Agency (IAEA)/National University of Singapore (NUS) 10 years of experience.

    PubMed

    Nather, A; Phillips, G O; Morales Pedraza, Jorge; Lee, Chris C W

    2009-05-01

    National University of Singapore (NUS) was appointed by IAEA to become IAEA/NUS Regional Training Centre (RTC) for Asia and the Pacific region in September 1996. The Government of Singapore (represented by the Ministry of Environment) with the National Science and Technology Board as the funding agency awarded a grant of S$225,500 to build a new purpose-built tissue bank to be the Regional Training Centre. National University Hospital provided a space of 2,000 square feet for this purpose. The first Diploma Course was launched on 3 November 1997 with 17 candidates with the first NUS Diploma Examination being held in October 1998. Between November 1997 and April 2007, a total of nine courses were conducted by RTC with a total of 180 tissue bank operators, 133 from Asia and the Pacific region (13 countries including 2 from Iran), 14 from Africa (Algeria, Egypt, Libya, Egypt, South Africa and Zambia), 6 from Latin America (Brazil, Chile, Cuba, Peru and Uruguay), 9 from Europe (Greece, Slovakia, Poland, Ukraine) and 2 from Australia. The last batch (ninth batch) involved twenty students registered in April 2007 and will be due to sit for the terminal examination only in April 2008.

  19. Technical Note: An operational landslide early warning system at regional scale based on space-time-variable rainfall thresholds

    NASA Astrophysics Data System (ADS)

    Segoni, S.; Battistini, A.; Rossi, G.; Rosi, A.; Lagomarsino, D.; Catani, F.; Moretti, S.; Casagli, N.

    2015-04-01

    We set up an early warning system for rainfall-induced landslides in Tuscany (23 000 km2). The system is based on a set of state-of-the-art intensity-duration rainfall thresholds (Segoni et al., 2014b) and makes use of LAMI (Limited Area Model Italy) rainfall forecasts and real-time rainfall data provided by an automated network of more than 300 rain gauges. The system was implemented in a WebGIS to ease the operational use in civil protection procedures: it is simple and intuitive to consult, and it provides different outputs. When switching among different views, the system is able to focus both on monitoring of real-time data and on forecasting at different lead times up to 48 h. Moreover, the system can switch between a basic data view where a synoptic scenario of the hazard can be shown all over the region and a more in-depth view were the rainfall path of rain gauges can be displayed and constantly compared with rainfall thresholds. To better account for the variability of the geomorphological and meteorological settings encountered in Tuscany, the region is subdivided into 25 alert zones, each provided with a specific threshold. The warning system reflects this subdivision: using a network of more than 300 rain gauges, it allows for the monitoring of each alert zone separately so that warnings can be issued independently. An important feature of the warning system is that the visualization of the thresholds in the WebGIS interface may vary in time depending on when the starting time of the rainfall event is set. The starting time of the rainfall event is considered as a variable by the early warning system: whenever new rainfall data are available, a recursive algorithm identifies the starting time for which the rainfall path is closest to or overcomes the threshold. This is considered the most hazardous condition, and it is displayed by the WebGIS interface. The early warning system is used to forecast and monitor the landslide hazard in the whole region

  20. Technical Note: An operational landslide early warning system at regional scale based on space-time variable rainfall thresholds

    NASA Astrophysics Data System (ADS)

    Segoni, S.; Battistini, A.; Rossi, G.; Rosi, A.; Lagomarsino, D.; Catani, F.; Moretti, S.; Casagli, N.

    2014-10-01

    We set up an early warning system for rainfall-induced landslides in Tuscany (23 000 km2). The system is based on a set of state-of-the-art intensity-duration rainfall thresholds (Segoni et al., 2014b), makes use of LAMI rainfall forecasts and real-time rainfall data provided by an automated network of more than 300 rain-gauges. The system was implemented in a WebGIS to ease the operational use in civil protection procedures: it is simple and intuitive to consult and it provides different outputs. Switching among different views, the system is able to focus both on monitoring of real time data and on forecasting at different lead times up to 48 h. Moreover, the system can switch between a very straightforward view where a synoptic scenario of the hazard can be shown all over the region and a more in-depth view were the rainfall path of rain-gauges can be displayed and constantly compared with rainfall thresholds. To better account for the high spatial variability of the physical features, which affects the relationship between rainfall and landslides, the region is subdivided into 25 alert zones, each provided with a specific threshold. The warning system reflects this subdivision: using a network of 332 rain gauges, it allows monitoring each alert zone separately and warnings can be issued independently from an alert zone to another. An important feature of the warning system is the use of thresholds that may vary in time adapting at the conditions of the rainfall path recorded by the rain-gauges. Depending on when the starting time of the rainfall event is set, the comparison with the threshold may produce different outcomes. Therefore, a recursive algorithm was developed to check and compare with the thresholds all possible starting times, highlighting the worst scenario and showing in the WebGIS interface at what time and how much the rainfall path has exceeded or will exceed the most critical threshold. Besides forecasting and monitoring the hazard scenario

  1. Final Technical Report for "Collaborative Research: Regional climate-change projections through next-generation empirical and dynamical models"

    SciTech Connect

    Robertson, A.W.; Ghil, M.; Kravtsov, K.; Smyth, P.J.

    2011-04-08

    This project was a continuation of previous work under DOE CCPP funding in which we developed a twin approach of non-homogeneous hidden Markov models (NHMMs) and coupled ocean-atmosphere (O-A) intermediate-complexity models (ICMs) to identify the potentially predictable modes of climate variability, and to investigate their impacts on the regional-scale. We have developed a family of latent-variable NHMMs to simulate historical records of daily rainfall, and used them to downscale seasonal predictions. We have also developed empirical mode reduction (EMR) models for gaining insight into the underlying dynamics in observational data and general circulation model (GCM) simulations. Using coupled O-A ICMs, we have identified a new mechanism of interdecadal climate variability, involving the midlatitude oceans mesoscale eddy field and nonlinear, persistent atmospheric response to the oceanic anomalies. A related decadal mode is also identified, associated with the oceans thermohaline circulation. The goal of the continuation was to build on these ICM results and NHMM/EMR model developments and software to strengthen two key pillars of support for the development and application of climate models for climate change projections on time scales of decades to centuries, namely: (a) dynamical and theoretical understanding of decadal-to-interdecadal oscillations and their predictability; and (b) an interface from climate models to applications, in order to inform societal adaptation strategies to climate change at the regional scale, including model calibration, correction, downscaling and, most importantly, assessment and interpretation of spread and uncertainties in multi-model ensembles. Our main results from the grant consist of extensive further development of the hidden Markov models for rainfall simulation and downscaling specifically within the non-stationary climate change context together with the development of parallelized software; application of NHMMs to

  2. Final Technical Report for "Collaborative Research. Regional climate-change projections through next-generation empirical and dynamical models"

    SciTech Connect

    Kravtsov, S.; Robertson, Andrew W.; Ghil, Michael; Smyth, Padhraic J.

    2011-04-08

    This project was a continuation of previous work under DOE CCPP funding in which we developed a twin approach of non-homogeneous hidden Markov models (NHMMs) and coupled ocean-atmosphere (O-A) intermediate-complexity models (ICMs) to identify the potentially predictable modes of climate variability, and to investigate their impacts on the regional-scale. We have developed a family of latent-variable NHMMs to simulate historical records of daily rainfall, and used them to downscale seasonal predictions. We have also developed empirical mode reduction (EMR) models for gaining insight into the underlying dynamics in observational data and general circulation model (GCM) simulations. Using coupled O-A ICMs, we have identified a new mechanism of interdecadal climate variability, involving the midlatitude oceans mesoscale eddy field and nonlinear, persistent atmospheric response to the oceanic anomalies. A related decadal mode is also identified, associated with the oceans thermohaline circulation. The goal of the continuation was to build on these ICM results and NHMM/EMR model developments and software to strengthen two key pillars of support for the development and application of climate models for climate change projections on time scales of decades to centuries, namely: (a) dynamical and theoretical understanding of decadal-to-interdecadal oscillations and their predictability; and (b) an interface from climate models to applications, in order to inform societal adaptation strategies to climate change at the regional scale, including model calibration, correction, downscaling and, most importantly, assessment and interpretation of spread and uncertainties in multi-model ensembles. Our main results from the grant consist of extensive further development of the hidden Markov models for rainfall simulation and downscaling specifically within the non-stationary climate change context together with the development of parallelized software; application of NHMMs to

  3. IAEA programme in the field of radiation technology

    NASA Astrophysics Data System (ADS)

    Chmielewski, Andrzej G.; Haji-Saeid, Mohammad

    2005-07-01

    Radiation technologies applying gamma sources and electron accelerators for material modification are well-established processes. There are over 160 gamma industrial irradiators and 1300 electron industrial accelerators in operation worldwide. A new advancement in the field of radiation sources engineering is the development of high power direct e-/X conversion sources based on electron accelerators. Technologies to be developed beside environmental applications could be nanomaterials, structure engineered materials (sorbents, composites, ordered polymers, etc.) and natural polymers' processing. New products based on radiation-processed polysaccharides have already been commercialised in many countries of the East Asia and Pacific Region, especially in those being rich in natural polymers. Very important and promising applications concern environmental protection-radiation technology, being a clean and environment friendly process, helps to curb pollutants' emission as well. Industrial plants for flue gas treatment have been constructed in Poland and China. The pilot plant in Bulgaria using this technology has just started its operation. The Polish plant is equipped with accelerators of over 1 MW power, a breakthrough in radiation technology application. The industrial plant for wastewater treatment is under development in Korea and a pilot plant for sewage sludge irradiation has been in operation in India for many years. Due to recent developments, the Agency has restructured its programme and organized a Technical Meeting (TM) on "Emerging Applications of Radiation Technology for the 21st Century" at its Headquarters in Vienna, Austria, in April 2003, to review the present situation and possible developments of radiation technology to contribute to a sustainable development. This meeting provided the basic input to launch others in the most important fields of radiation technology applications: "Advances in Radiation Chemistry of Polymers" (Notre Dame, USA

  4. CONFERENCE REPORT: Summary of the 16th IAEA Technical Meeting on 'Research using Small Fusion Devices'

    NASA Astrophysics Data System (ADS)

    Gribkov, V.; Van Oost, G.; Malaquias, A.; Herrera, J.

    2006-10-01

    Common research topics that are being studied in small, medium and large devices such as H-mode like or improved confinement, turbulence and transport are reported. These included modelling and diagnostic developments for edge and core, to characterize plasma density, temperature, electric potential, plasma flows, turbulence scale, etc. Innovative diagnostic methods were designed and implemented which could be used to develop experiments in small devices (in some cases not possible in large devices due to higher power deposition) to allow a better understanding of plasma edge and core properties. Reports are given addressing research in linear devices that can be used to study particular plasma physics topics relevant for other magnetic confinement devices such as the radial transport and the modelling of self-organized plasma jets involved in spheromak-like plasma formation. Some aspects of the work presented are of interest to the astrophysics community since they are believed to shed light on the basis of the physics of stellar jets. On the dense magnetized plasmas (DMP) topic, the present status of research, operation of new devices, plasma dynamics modelling and diagnostic developments is reported. The main devices presented belong to the class of Z-pinches, mostly plasma foci, and several papers were presented under this topic. The physics of DMP is important both for the main-stream fusion investigations as well as for providing the basis for elaboration of new concepts. New high-current technology introduced in the DMP devices design and construction make these devices nowadays more reliably fitted to various applications and give the possibility to widen the energy range used by them in both directions—to the multi-MJ level facilities and down to miniature plasma focus devices with energy of just a few J.

  5. Proceedings of the IAEA specialists` meeting on cracking in LWR RPV head penetrations

    SciTech Connect

    Pugh, C.E.; Raney, S.J.

    1996-07-01

    This report contains 17 papers that were presented in four sessions at the IAEA Specialists` meeting on Cracking in LWR RPV Head Penetrations held at ASTM Headquarters in Philadelphia on May 2-3, 1995. The papers are compiled here in the order that presentations were made in the sessions, and they relate to operational observations, inspection techniques, analytical modeling, and regulatory control. The goal of the meeting was to allow international experts to review experience in the field of ensuring adequate performance of reactor pressure vessel (RPV) heads and penetrations. The emphasis was to allow a better understanding of RPV material behavior, to provide guidance supporting reliability and adequate performance, and to assist in defining directions for further investigations. The international nature of the meeting is illustrated by the fact that papers were presented by researchers from 10 countries. There were technical experts present form other countries who participated in discussions of the results presented. This present document incorporates the final version of the papers as received from the authors. The final chapter includes conclusions and recommendations. Individual papers have been cataloged separately.

  6. The U.S. Support Program to IAEA Safeguards - Destructive Analysis

    SciTech Connect

    Hoffheins,B.

    2008-07-13

    The U.S. Support Program (USSP) to IAEA Safeguards priority of destructive analysis is aimed at strengthening the IAEA's ability to use destructive analysis as a safeguards tool. IAEA inspectors bring back nuclear and environmental samples from inspections, which are first cataloged by the IAEA and then analyzed by a network of laboratories located in many Member States and the IAEA's own Safeguards Analytical Laboratory in Seibersdorf, Austria. Historically, the USSP was instrumental in introducing environmental sampling techniques to the IAEA in order to enhance its understanding of material processing activities conducted at nuclear facilities. The USSP has also worked with the IAEA to improve understanding of measurement uncertainty and measurement quality, incorporate new and improved analytical methods, and purchase analytical and computer equipment. Recent activities include a temporary increase in analysis of environmental samples using secondary ion mass spectrometry and provision of a cost-free expert to restore secondary ion mass spectroscopy laboratory functionality and to modernize the IAEA's Safeguards Analytical Laboratory Information System.

  7. The GEOFAR Project - Geothermal Finance and Awareness in Europeans Regions - Development of new schemes to overcome non-technical barriers, focusing particularly on financial barriers

    NASA Astrophysics Data System (ADS)

    Poux, Adeline; Wendel, Marco; Jaudin, Florence; Hiegl, Mathias

    2010-05-01

    Numerous advantages of geothermal energy like its widespread distribution, a base-load power and availability higher than 90%, a small footprint and low carbon emissions, and the growing concerns about climate changes strongly promote the development of geothermal projects. Geothermal energy as a local energy source implies needs on surface to be located close to the geothermal resource. Many European regions dispose of a good geothermal potential but it is mostly not sufficiently developed due to non-technical barriers occurring at the very early stages of the project. The GEOFAR Project carried out within the framework of EU's "Intelligent Energy Europe" (IEE) program, gathers a consortium of European partners from Germany, France, Greece, Spain and Portugal. Launched in September 2008, the aim of this research project is to analyze the mentioned non-technical barriers, focusing most particularly on economic and financial aspects. Based on this analysis GEOFAR aims at developing new financial and administrative schemes to overcome the main financial barriers for deep geothermal projects (for electricity and direct use, without heat pumps). The analysis of the current situation and the future development of geothermal energy in GEOFAR target countries (Germany, France, Greece, Spain, Portugal, Slovakia, Bulgaria and Hungary) was necessary to understand and expose the diverging status of the geothermal sector and the more and less complicated situation for geothermal projects in different Europeans Regions. A deeper analysis of 40 cases studies (operating, planned and failed projects) of deep geothermal projects also contributed to this detailed view. An exhaustive analysis and description of financial mechanisms already existing in different European countries and at European level to support investors completed the research on non-technical barriers. Based on this profound analysis, the GEOFAR project has made an overview of the difficulties met by project

  8. Self consistent particles dynamics in/out of the cusp region by using back tracking technics; a global 3D PIC simulation approach

    NASA Astrophysics Data System (ADS)

    Esmaeili, A.; Cai, D.; Lembege, B.; Nishikawa, K.

    2013-12-01

    Large scale three dimensionbal PIC (particle in cell) simulations are presently used in order to analyze the global solar wind-terrestrial magnetosphere intreraction within a full self-consistent approach, and where both electrons and ions are treated as an assembly of individual particles. This 3D kinetic approach allows us to analyze in particular the dynamics and the fine structures of the cusp region when including self consistently not only its whole neighborhood (in the terrestrial magnetosphere) but also the impact of the solar wind and the interplanetary field (IMF) features. Herein, we focuss our attention on the cusp region and in particular on the acceleration and precipitation of particles (both ions and electrons) within the cusp. In present simulations, the IMF is chosen northward, (i.e. where the X -reconnection region is just above the cusp, in the meridian plane). Back-trackings of self-consistent particles are analyzed in details in order to determine (i) which particles (just above the cusp) are precipitated deeply into the cusp, (ii) which populations are injected from the cusp into the nearby tail, (iii) where the particles suffer the largest energisation along their self-consistent trajectories, (iv) where these populations accumulate, and (v) where the most energetic particles are originally coming from. This approach allows to make a traking of particles within the scenario "solar wind-magnetosheath- cusp -nearbytail"; moreover it strongly differs from the standard test particles technics and allows to provide informations not accessible when using full MHD approach. Keywords: Tracing Particles, Particle In Cell (PIC) simulation, double cusp, test particles method, IMF, Solar wind, Magnetosphere

  9. End user needs for enhanced IAEA Safeguards Information Management Capabilities

    SciTech Connect

    Badalamente, R.; Anzelon, G.; Deland, S.; Whiteson, R.

    1994-07-01

    The International Atomic Energy Agency is undertaking a program for strengthening its safeguards on the recognition that safeguards must give assurance not only of the non-diversion of declared material or that declared facilities are not being misused, but also of the absence of any undeclared nuclear activities in States which have signed comprehensive safeguards agreements with the Agency. The IAEA has determined that the detection of undeclared nuclear activities and the creation of confidence in the continuing peaceful use of declared material and facilities is largely dependent on more information being made available to the Agency and on the capability of the Agency to make more effective use of this additional information, as well as existing information.

  10. Patient exposure tracking: the IAEA smart card project.

    PubMed

    Rehani, Madan M; Frush, Donald P

    2011-09-01

    The existing approach of radiation protection is largely based on the collective dose to the population with provisions for protection at an individual level through justification and optimisation. With the individual patient dose now exceeding the life-long occupational dose to a worker in a typical radiology practice, there is a need to establish approaches based on the protection of an individual patient. Radiation exposure tracking seems a way forward in this respect. Technological advances in recent years have provided opportunities for tracking to becoming a reality. The IAEA project on Smart Card/SmartRadTrack is described in this paper. The tracking is now a reality in a few dozen centres in many countries connected by picture archiving and communication systems, and there is hope that this will extend to cover other countries and continents.

  11. Los Alamos National Laboratory support to IAEA environmental safeguards

    SciTech Connect

    Steiner, Robert E; Dry, Don E; Roensch, Fred R; Kinman, Will S; Roach, Jeff L; La Mont, Stephen P

    2010-12-01

    The nuclear and radiochemistry group provides sample preparation and analysis support to the International Atomic Energy Agency (IAEA) Network of Analytical Laboratories (NWAL). These analyses include both non-destructive (alpha and gamma-ray spectrometry) and destructive (thermal ionization mass spectrometry and inductively coupled plasma mass spectrometry) methods. On a bi-annual basis the NWAL laboratories are invited to meet to discuss program evolution and issues. During this meeting each participating laboratory summarizes their efforts over the previous two years. This presentation will present Los Alamos National Laboratories efforts in support of this program. Data showing results from sample and blank analysis will be presented along with capability enhancement and issues that arose over the previous two years.

  12. Technologies for pre-screening IAEA swipe samples

    SciTech Connect

    Smith, Nicholas A.; Steeb, Jennifer L.; Lee, Denise L.; Huckabay, Heath A.; Ticknor, Brian W.

    2015-11-09

    During the course of International Atomic Energy Agency (IAEA) inspections, many samples are taken for the purpose of verifying the declared facility activities and identifying any possible undeclared activities. One of these sampling techniques is the environmental swipe sample. Due to the large number of samples collected, and the amount of time that is required to analyze them, prioritizing these swipes in the field or upon receipt at the Network of Analytical Laboratories (NWAL) will allow sensitive or mission-critical analyses to be performed sooner. As a result of this study, technologies were placed into one of three categories: recommended, promising, or not recommended. Both neutron activation analysis (NAA) and X-ray fluorescence (XRF) are recommended for further study and possible field deployment. These techniques performed the best in initial trials for pre-screening and prioritizing IAEA swipes. We learned that for NAA more characterization of cold elements (such as calcium and magnesium) would need to be emphasized, and for XRF it may be appropriate to move towards a benchtop XRF versus a handheld XRF due to the increased range of elements available on benchtop equipment. Promising techniques that will require additional research and development include confocal Raman microscopy, fluorescence microscopy, and infrared (IR) microscopy. These techniques showed substantive responses to uranium compounds, but expensive instrumentation upgrades (confocal Raman) or university engagement (fluorescence microscopy) may be necessary to investigate the utility of the techniques completely. Point-and-shoot (handheld) Raman and attenuated total reflectance–infrared (ATR-IR) measurements are not recommended, as they have not shown enough promise to continue investigations.

  13. The future of IAEA safeguards: challenges and responses

    SciTech Connect

    Pilat, Joseph F; Budlong - Sylvester, Kory W

    2011-01-01

    For nearly two decades, the International Atomic Energy Agency (lAEA) has been transforming its safeguards system to address the challenges posed by undeclared nuclear programs, the associated revelation of an extensive non-State nuclear procurement network and other issues, including past limits to its verification mandate and the burden of noncompliance issues. Implementing the new measures, including those in the Additional Protocol, and integrating new and old safeguards measures, remains a work in progress. Implementation is complicated by factors including the limited teclmological tools that are available to address such issues as safeguarding bulk handling facilities, detection of undeclared facilities/activities, especially related to enrichment, etc. As this process continues, new challenges are arising, including the demands of expanding nuclear power production worldwide, so-called safeguards by design for a new generation of facilities, the possible IAEA role in a fissile material cutoff treaty and other elements of the arms control and disarmament agenda, the possible role in 'rollback' cases, etc. There is no doubt safeguards will need to evolve in the future, as they have over the last decades. In order for the evolutionary path to proceed, there will inter alia be a need to identify technological gaps, especially with respect to undeclared facilities, and ensure they are filled by adapting old safeguards technologies, by developing and introducing new and novel safeguards teclmologies and/or by developing new procedures and protocols. Safeguards will also need to respond to anticipated emerging threats and to future, unanticipated threats. This will require strategic planning and cooperation among Member States and with the Agency. This paper will address challenges to IAEA safeguards and the technological possibilities and R&D strategies needed to meet those challenges in the context of the forty-year evolution of safeguards, including the ongoing

  14. IAEA Coordinated Research Project on HTGR Reactor Physics, Thermal-hydraulics and Depletion Uncertainty Analysis

    SciTech Connect

    Strydom, Gerhard; Bostelmann, F.

    2015-09-01

    The continued development of High Temperature Gas Cooled Reactors (HTGRs) requires verification of HTGR design and safety features with reliable high fidelity physics models and robust, efficient, and accurate codes. The predictive capability of coupled neutronics/thermal-hydraulics and depletion simulations for reactor design and safety analysis can be assessed with sensitivity analysis (SA) and uncertainty analysis (UA) methods. Uncertainty originates from errors in physical data, manufacturing uncertainties, modelling and computational algorithms. (The interested reader is referred to the large body of published SA and UA literature for a more complete overview of the various types of uncertainties, methodologies and results obtained). SA is helpful for ranking the various sources of uncertainty and error in the results of core analyses. SA and UA are required to address cost, safety, and licensing needs and should be applied to all aspects of reactor multi-physics simulation. SA and UA can guide experimental, modelling, and algorithm research and development. Current SA and UA rely either on derivative-based methods such as stochastic sampling methods or on generalized perturbation theory to obtain sensitivity coefficients. Neither approach addresses all needs. In order to benefit from recent advances in modelling and simulation and the availability of new covariance data (nuclear data uncertainties) extensive sensitivity and uncertainty studies are needed for quantification of the impact of different sources of uncertainties on the design and safety parameters of HTGRs. Only a parallel effort in advanced simulation and in nuclear data improvement will be able to provide designers with more robust and well validated calculation tools to meet design target accuracies. In February 2009, the Technical Working Group on Gas-Cooled Reactors (TWG-GCR) of the International Atomic Energy Agency (IAEA) recommended that the proposed Coordinated Research Program (CRP) on

  15. Continuing Education of Health Personnel and Its Evaluation. Report on the Technical Discussions at the Session of the Regional Committee for Europe (29th, Helsinki, Finland, September 14, 1979).

    ERIC Educational Resources Information Center

    World Health Organization, Copenhagen (Denmark). Regional Office for Europe.

    A report on the technical discussions on continuing education of health personnel and its evaluation, held at the 1979 session of the World Health Organization (WHO) Regional Committee for Europe is presented. For medical practitioners, a wide range of programs and systems is offered, depending on the social and political organization of the…

  16. The FAO/NACA Asia Regional Technical Guidelines on Health Management for the Responsible Movement of Live Aquatic Animals: lessons learned from their development and implementation.

    PubMed

    Subasinghe, R P; Bondad-Reantaso, M G

    2008-04-01

    Aquaculture is the fastest growing food producing sector in the world and it is expected to produce significant quantities of fish in the coming years to meet the growing global demand for aquatic animal products. The expansion and diversification of the sector, along with globalisation and trade liberalisation have resulted in aquatic animals and animal products moving around the world rapidly, causing serious disease outbreaks stemming from incursions of pathogens through unregulated transboundary movements. It has become necessary to develop appropriate guidelines for establishing national regulatory frameworks to improve responsibility in transboundary movement of live aquatic animals. In 2000, the Food and Agriculture Organization of the United Nations (FAO), in collaboration with the Network of Aquaculture Centres in Asia-Pacific (NACA) and in partnership with 21 Asian countries, developed the Asia Regional Technical Guidelines on Health Management for the Responsible Movement of Live Aquatic Animals. The present article outlines the development process of the guidelines, the lessons learned from their implementation at national level and the way forward. PMID:18666478

  17. The FAO/NACA Asia Regional Technical Guidelines on Health Management for the Responsible Movement of Live Aquatic Animals: lessons learned from their development and implementation.

    PubMed

    Subasinghe, R P; Bondad-Reantaso, M G

    2008-04-01

    Aquaculture is the fastest growing food producing sector in the world and it is expected to produce significant quantities of fish in the coming years to meet the growing global demand for aquatic animal products. The expansion and diversification of the sector, along with globalisation and trade liberalisation have resulted in aquatic animals and animal products moving around the world rapidly, causing serious disease outbreaks stemming from incursions of pathogens through unregulated transboundary movements. It has become necessary to develop appropriate guidelines for establishing national regulatory frameworks to improve responsibility in transboundary movement of live aquatic animals. In 2000, the Food and Agriculture Organization of the United Nations (FAO), in collaboration with the Network of Aquaculture Centres in Asia-Pacific (NACA) and in partnership with 21 Asian countries, developed the Asia Regional Technical Guidelines on Health Management for the Responsible Movement of Live Aquatic Animals. The present article outlines the development process of the guidelines, the lessons learned from their implementation at national level and the way forward.

  18. JMA's regional atmospheric transport model calculations for the WMO technical task team on meteorological analyses for Fukushima Daiichi Nuclear Power Plant accident.

    PubMed

    Saito, Kazuo; Shimbori, Toshiki; Draxler, Roland

    2015-01-01

    The World Meteorological Organization (WMO) convened a small technical task team of experts to produce a set of meteorological analyses to drive atmospheric transport, dispersion and deposition models (ATDMs) for the United Nations Scientific Committee on the Effects of Atomic Radiation's assessment of the Fukushima Daiichi Nuclear Power Plant (DNPP) accident. The Japan Meteorological Agency (JMA) collaborated with the WMO task team as the regional specialized meteorological center of the country where the accident occurred, and provided its operational 5-km resolution mesoscale (MESO) analysis and its 1-km resolution radar/rain gauge-analyzed precipitation (RAP) data. The JMA's mesoscale tracer transport model was modified to a regional ATDM for radionuclides (RATM), which included newly implemented algorithms for dry deposition, wet scavenging, and gravitational settling of radionuclide aerosol particles. Preliminary and revised calculations of the JMA-RATM were conducted according to the task team's protocol. Verification against Cesium 137 ((137)Cs) deposition measurements and observed air concentration time series showed that the performance of RATM with MESO data was significantly improved by the revisions to the model. The use of RAP data improved the (137)Cs deposition pattern but not the time series of air concentrations at Tokai-mura compared with calculations just using the MESO data. Sensitivity tests of some of the more uncertain parameters were conducted to determine their impacts on ATDM calculations, and the dispersion and deposition of radionuclides on 15 March 2011, the period of some of the largest emissions and deposition to the land areas of Japan. The area with high deposition in the northwest of Fukushima DNPP and the hotspot in the central part of Fukushima prefecture were primarily formed by wet scavenging influenced by the orographic effect of the mountainous area in the west of the Fukushima prefecture.

  19. JMA's regional atmospheric transport model calculations for the WMO technical task team on meteorological analyses for Fukushima Daiichi Nuclear Power Plant accident.

    PubMed

    Saito, Kazuo; Shimbori, Toshiki; Draxler, Roland

    2015-01-01

    The World Meteorological Organization (WMO) convened a small technical task team of experts to produce a set of meteorological analyses to drive atmospheric transport, dispersion and deposition models (ATDMs) for the United Nations Scientific Committee on the Effects of Atomic Radiation's assessment of the Fukushima Daiichi Nuclear Power Plant (DNPP) accident. The Japan Meteorological Agency (JMA) collaborated with the WMO task team as the regional specialized meteorological center of the country where the accident occurred, and provided its operational 5-km resolution mesoscale (MESO) analysis and its 1-km resolution radar/rain gauge-analyzed precipitation (RAP) data. The JMA's mesoscale tracer transport model was modified to a regional ATDM for radionuclides (RATM), which included newly implemented algorithms for dry deposition, wet scavenging, and gravitational settling of radionuclide aerosol particles. Preliminary and revised calculations of the JMA-RATM were conducted according to the task team's protocol. Verification against Cesium 137 ((137)Cs) deposition measurements and observed air concentration time series showed that the performance of RATM with MESO data was significantly improved by the revisions to the model. The use of RAP data improved the (137)Cs deposition pattern but not the time series of air concentrations at Tokai-mura compared with calculations just using the MESO data. Sensitivity tests of some of the more uncertain parameters were conducted to determine their impacts on ATDM calculations, and the dispersion and deposition of radionuclides on 15 March 2011, the period of some of the largest emissions and deposition to the land areas of Japan. The area with high deposition in the northwest of Fukushima DNPP and the hotspot in the central part of Fukushima prefecture were primarily formed by wet scavenging influenced by the orographic effect of the mountainous area in the west of the Fukushima prefecture. PMID:24703334

  20. Results of an IAEA inter-comparison exercise to assess 137Cs and total 210Pb analytical performance in soil.

    PubMed

    Shakhashiro, A; Mabit, L

    2009-01-01

    Fallout radionuclides (FRNs) such as (210)Pb and (137)Cs have been widely used to assess soil erosion and sedimentation processes. It is of major importance to obtain accurate analytical results of FRNs by gamma analysis before any data treatment through conversion model and to allow subsequent comparison of erosion and sedimentation rates from different case studies. Therefore, IAEA organized an inter-comparison exercise to assess the validity and reliability of the analytical results of (137)Cs and total (210)Pb using gamma-spectrometry in the various laboratories participating in the IAEA Co-ordinated Research Project on "Assess the effectiveness of soil conservation measures for sustainable watershed management using fallout radionuclides". Reference materials were distributed to 14 participating laboratories and, using a rating system, their analytical results were compared to the reference values assigned. In the case of (137)Cs, the analytical results were satisfactory with 66% of the laboratories producing acceptable results. Only the sample with low (137)Cs activity (2.6+/-0.2Bqkg(-1)) gave less accurate results with more than 25% not acceptable results. The total (210)Pb analysis indicated a clear need for corrective actions in the analysis process as only 36% of the laboratories involved in the proficiency test was able to access total (210)Pb with occurrence (bias 10%). This inter-laboratory test underlines that further inter-comparison exercises should be organized by IAEA or regional laboratories to ensure the quality of the analytical data produced in Member States. As a result of the above-mentioned proficiency test, some recommendations have been provided to improve accurate gamma measurement of both (137)Cs and total (210)Pb. PMID:18760612

  1. Lessons from UNSCOM and IAEA regarding remote monitoring and air sampling

    SciTech Connect

    Dupree, S.A.

    1996-01-01

    In 1991, at the direction of the United Nations Security Council, UNSCOM and IAEA developed plans for On-going Monitoring and Verification (OMV) in Iraq. The plans were accepted by the Security Council and remote monitoring and atmospheric sampling equipment has been installed at selected sites in Iraq. The remote monitoring equipment consists of video cameras and sensors positioned to observe equipment or activities at sites that could be used to support the development or manufacture of weapons of mass destruction, or long-range missiles. The atmospheric sampling equipment provides unattended collection of chemical samples from sites that could be used to support the development or manufacture of chemical weapon agents. To support OMV in Iraq, UNSCOM has established the Baghdad Monitoring and Verification Centre. Imagery from the remote monitoring cameras can be accessed in near-real time from the Centre through RIF communication links with the monitored sites. The OMV program in Iraq has implications for international cooperative monitoring in both global and regional contexts. However, monitoring systems such as those used in Iraq are not sufficient, in and of themselves, to guarantee the absence of prohibited activities. Such systems cannot replace on-site inspections by competent, trained inspectors. However, monitoring similar to that used in Iraq can contribute to openness and confidence building, to the development of mutual trust, and to the improvement of regional stability.

  2. Mercury in waters, soils, and sediments of the New Jersey Coastal Plain: A comparison of regional distribution and mobility with the mercury contamination at the William J. Hughes Technical Center, Atlantic County, New Jersey

    USGS Publications Warehouse

    Barringer, Julia L.; Szabo, Zoltan; Reilly, Pamela A.

    2012-01-01

    Mercury in soils, surface water, and groundwater at the William J. Hughes Technical Center , Atlantic County, New Jersey, has been found at levels that exceed established background concentrations in Coastal Plain waters, and, in some cases, New Jersey State standards for mercury in various media. As of 2012, it is not known whether this mercury is part of regional mercury contamination or whether it is related to former military activities. Regionally, groundwater supplying about 700 domestic wells in the New Jersey Coastal Plain is contaminated with mercury that appears to be derived from anthropogenic inputs, such as agricultural pesticide use and atmospheric deposition. High levels of mercury occasionally are found in Coastal Plain soils, but disturbance during residential development on former agricultural land is thought to have mobilized any mercury applied during farming, a hypothesis borne out by experiments leaching mercury from soils. In the unsewered residential areas with mercury-contaminated groundwater, septic-system effluent is believed to create reducing conditions in which mercury sorbed to subsoils is mobilized to groundwater. In comparing the levels of mercury found in soils, sediments, streamwater, and groundwater at the William J. Hughes Technical Center site with those found regionally, mercury concentrations in groundwater in the region are, in some cases, substantially higher than those found in groundwater at the William J. Hughes Technical Center site. Nevertheless, concentrations of mercury in streamwater at the site are, in some instances, higher than most found regionally. The mercury contents in soils and sediment at the William J. Hughes Technical Center site are substantially higher than those found to date (2012) in the region, indicating that a source other than regional sources may be present at the site.

  3. Technical writing versus technical writing

    NASA Technical Reports Server (NTRS)

    Dillingham, J. W.

    1981-01-01

    Two terms, two job categories, 'technical writer' and 'technical author' are discussed in terms of industrial and business requirements and standards. A distinction between 'technical writing' and technical 'writing' is made. The term 'technical editor' is also considered. Problems inherent in the design of programs to prepare and train students for these jobs are discussed. A closer alliance between industry and academia is suggested as a means of preparing students with competent technical communication skills (especially writing and editing skills) and good technical skills.

  4. Technology recommendations for pre-screening of IAEA swipe samples

    SciTech Connect

    Steeb, Jennifer L.; Smith, Nicholas A.; Lee, Denise L.; Huckabay, Heath A.; Ticknor, Brian W.

    2015-01-01

    Argonne and Oak Ridge National Laboratories have prepared an analysis of recommended, possible, and not recommended technologies for pre-screening and prioritizing IAEA swipes. The analytical techniques listed under the recommended technology list are the most promising techniques available to date. The recommended list is divided into two sections: Argonne’s recommended techniques and Oak Ridge’s recommended techniques. This list was divided based upon the expertise of staff in each subject area and/or the instrumentation available at each laboratory. The following section, titled Possible Techniques, is a list of analytical techniques that could be used for pre-screening and prioritizing swipes if additional instrumentation and effort were provided. These techniques are not necessarily top priority, but should not be discounted for future or expanded efforts. Lastly, a list of not recommended techniques is provided to outline the analytical methods and instrumentation that were investigated by each lab but deemed not suitable for this task. In addition to the recommendation list, a short procedure is provided outlining the steps followed for destructive analysis by the Network of Analytical Laboratories (NWAL) for determination of uranium concentrations, isotopic content of sample and swipe. Swipes generated for this project will be given to ORNL’s NWAL laboratory for analysis after analysis by other techniques at both laboratories.

  5. Analytical Quality Control - Quality Assurance Iaea-Ilmr Intercomparison Programmes

    NASA Astrophysics Data System (ADS)

    Ballestra, S.; Vas, D.

    The importance of analytical quality control, especially for radionuclide measurements, was recognized at the International Atomic Energy Agency (IAEA) since it began operations in 1957. Activities at the International Laboratory of Marine Radioactivity (ILMR) in Monaco focused on radioisotope calibration to resolve measurement differences among laboratories all over the world. To-date, standardization and intercalibration remain key services of the ILMR at Monaco. Quality Assurance (QA) as well as Good Laboratory Practices (GLP) are manifestations of the increased attention being given to quality control. The programme, known as Analical Quality Control Services (AQCS), provides intercomparison studies and reference materials for natural and artificial radionuclides. Since the early 1970's, the ILMR has provided about 30 intercomparison samples and reference materials to laboratories all over the world to enable them to assess and control the quality of their work. Intercomparison and reference samples from the ILMR cover a wide range of materials and analytes in different concentration ranges. Natural matrix standards for radioactivity measurements for marine sediments, algae, and biota are available. The reference Samples produced through the resent intercomparison programmes are believe to play an important role in improving quality control in laboratories engaged in environmental radioactivity measurements.

  6. IAEA regulatory initiatives for the air transport of large quantities of radioactive materials

    SciTech Connect

    Luna, Robert E.; Wangler, Michael W.; Selling, Hendrik A.

    1992-01-01

    The International Atomic Energy Agency (IAEA) has been laboring since 1988 over a far reaching change to its model regulations (IAEA, 1990) for the transport of radioactive materials (RAM). This change could impact the manner in which certain classes of radioactive materials are shipped by air and change some of the basic tenets of radioactive material transport regulations around the world. This report discusses issues associated with air transport regulations.

  7. Present status and strategic plan for the stable isotope reference materials at the IAEA.

    NASA Astrophysics Data System (ADS)

    Assonov, Sergey; Groening, Manfred

    2016-04-01

    The presentation will give the overview of the stable isotope reference materials (SI-RMs) under distribution by the IAEA, its stable isotope laboratory and capacities related to material testing & production as well as future plans. Historically, most of the IAEA reference materials were produced and made available via collaborations with expert stable isotope laboratories worldwide. The IAEA plans include several directions as follows: • Maintaining the scale-defining SI-RMs at the highest level and introducing adequate replacements when needed; • Monitoring existing SI-RMs for any potential alteration(s) and of isotopic values assigned; • Identifying and then addressing the needs for new SI-RMs, with the priority to address the most critical applications (environmental and climate related applications, human health, food safety studies) and newly emerging analytical isotope techniques; • Performing all measurements aimed for characterisation of new SI-RMs and the corresponding uncertainty evaluation in accordance to the latest metrological concepts; • Promoting metrological approaches on traceability and uncertainty evaluation in every day practice of stable isotope measurements; • Expanding the IAEA capacities for SI-RMs by (i) planning a renewed laboratory at IAEA; (ii) enlarging collaboration with expert laboratories aimed to help IAEA in production and characterisation of new SI-RMs. These major directions will help to address the increasing demand for Stable Isotope Reference Materials.

  8. The US Support Program to IAEA Safeguards Priority of Containment and Surveillance

    SciTech Connect

    Diaz,R.A.

    2008-06-13

    The United States Support Program (USSP) priority for containment and surveillance (US) focuses on maintaining or improving the reliability and cost-effectiveness of C/S systems for IAEA safeguards, expanding the number of systems that are unattended and remotely monitored, and developing verification methods that help streamline the on-site inspection process. Existing IAEA C/S systems have evolved to become complex, integrated systems, which may include active seals, nondestructive assay (NDA) instruments, video cameras, and other sensors. These systems operate autonomously. They send analytical data to IAEA headquarters where it can be reviewed. These systems present challenges to the goals of improved system performance, standardization, reliability, maintainability, documentation, and cost effectiveness. One critical lesson from past experiences is the need for cooperation and common objectives among the IAEA, the developer, and the facility operator, to create a successful, cost effective system. Recent USSP C/S activities include Rokkasho Reprocessing Plant safeguard systems, production of a new shift register, numerous vulnerability assessments of C/S systems, a conduit monitoring system which identifies tampering of IAEA conduit deployed in the field, fiber optic seal upgrades, unattended monitoring system software upgrades, next generation surveillance system which will upgrade existing camera systems, and support of the IAEA's development of the universal nondestructive assay data acquisition platform.

  9. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Peru.

    PubMed

    Gamero, Emma Castro; Morales Pedraza, Jorge

    2009-05-01

    The tissue bank "Rosa Guerzoni Chambergo" (RGCTB) located at the Child's Health Institute was inaugurated in 1996, with the financial and technical support of the IAEA program on radiation and tissue banking. Since 1998, the biological bandage of fresh and lyophilised pigskin, amnion and bone tissue is processed routinely in this bank. In all cases, the tissue is sterilised with the use of Cobalt-60 radiation, process carried out at the Laboratories of Irradiation of the Peruvian Institute of Nuclear Energy (IPEN). The tissue bank in the Child's Health Institute helped to save lives in an accident occurred in Lima, when a New Year's fireworks celebration ran out of control in January 2002. Nearly 300 people died in the tragic blaze and hundreds more were seriously burned and injured. Eight Lima hospitals and clinics suddenly were faced with saving the lives of severely burned men, women and children. Fortunately, authorities were ready to respond to the emergency. More than 1,600 dressings were sterilised and supplied to Lima surgeons. The efforts helped save the lives of patients who otherwise might not have survived the Lima fire. Between 1998 and September 2007, 35,012 tissue grafts were produced and irradiated. Radiation sterilised tissues are used by 20 national medical institutions as well as 17 private health institutions. The tissue bank established in Peru with the support of the IAEA is now producing the following tissues: pigskin dressings, fresh and freeze-dried; bone allografts, chips, wedges and powdered, and amnion dressings air-dried. It is also now leading the elaboration of national standards, assignment being entrusted by ONDT (Organización Nacional de Donación y Transplantes; National Organisation on Donation and Transplant). This among other will permit the accreditation of the tissue bank. In this task is also participating IPEN. PMID:18612849

  10. IAEA Isotope-enabled coupled catchment-lake water balance model, IWBMIso: description and validation.

    PubMed

    Belachew, Dagnachew Legesse; Leavesley, George; David, Olaf; Patterson, Dave; Aggarwal, Pradeep; Araguas, Luis; Terzer, Stefan; Carlson, Jack

    2016-01-01

    The International Atomic Energy Agency (IAEA) Water Balance Model with Isotopes (IWBMIso) is a spatially distributed monthly water balance model that considers water fluxes and storages and their associated isotopic compositions. It is composed of a lake water balance model that is tightly coupled with a catchment water balance model. Measured isotope compositions of precipitation, rivers, lakes, and groundwater provide data that can be used to make an improved estimate of the magnitude of the fluxes among the model components. The model has been developed using the Object Modelling System (OMS). A variety of open source geographic information systems and web-based tools have been combined to provide user support for (1) basin delineation, characterization, and parameterization; (2) data pre-processing; (3) model calibration and application; and (4) visualization and analysis of model results. In regions where measured data are limited, the model can use freely available global data sets of climate, isotopic composition of precipitation, and soils and vegetation characteristics to create input data files and estimate spatially distributed model parameters. The OMS model engine and support functions, and the spatial and web-based tool set are integrated using the Colorado State University Environmental Risk Assessment and Management System (eRAMS) framework. The IWBMIso can be used to assess the spatial and temporal variability of annual and monthly water balance components for input to water planning and management. PMID:26962894

  11. 49 CFR 171.23 - Requirements for specific materials and packagings transported under the ICAO Technical...

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ..., may be filled with a gas in the United States and offered for transportation and transported for... transported under the ICAO Technical Instructions, IMDG Code, Transport Canada TDG Regulations, or the IAEA... International Transport Standards and Regulations § 171.23 Requirements for specific materials and...

  12. 49 CFR 171.23 - Requirements for specific materials and packagings transported under the ICAO Technical...

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    .... Chemical oxygen generators must be approved, classed, described, packaged, and transported in accordance... transported under the ICAO Technical Instructions, IMDG Code, Transport Canada TDG Regulations, or the IAEA... International Transport Standards and Regulations § 171.23 Requirements for specific materials and...

  13. Lessons from UNSCOM/IAEA applicable to nuclear arms control

    SciTech Connect

    Dorn, D.W.

    1995-12-05

    In early 1991, the Security Council of the United Nations tasked the Director General of the International Atomic Energy Agency, with the assistance and cooperation of the United Nations Special Commission, to oversee the destruction, removal or rendering harmless of nuclear weapons material and capabilities in Iraq. The conduct of the nuclear inspections, and the subsequent activities (identification, destruction, removal rendering harmless), have provided a wealth of experience and insight into the inspection and monitoring process as well as into the political realities of such an operation. The early inspections were conducted in an atmosphere of discovery and inexperience on both the part of the Iraqis and the IAEA and UNSCOM. As time went on, the Iraqis became more adept at hiding and obscuring relevant documents and equipment, and the inspection teams became more knowledgeable about inspection and investigative techniques, and the pre-existing Iraqi programs. A continuous monitoring presence in Iraq has now been established and an import/export monitoring regime is being developed. While steps taken to date have proven effective in inhibiting resumption of nuclear weaponization activities, it remains to be seen how effective these measures will be in the future. The external and internal conditions which led the Iraqi leadership to undertake a nuclear weaponization program have not changed, and the prognosis for the long term is uncertain. The entire process in Iraq has shown how fragile are the tools available to the international community, and how a determined proliferator can evade inspection and monitoring measures. Such measures cannot prevent nuclear proliferation, they can only hope to deter it, or, failing in that, detect it.

  14. IAEA programs in empowering the nuclear medicine profession through online educational resources.

    PubMed

    Pascual, Thomas Nb; Dondi, Maurizio; Paez, Diana; Kashyap, Ravi; Nunez-Miller, Rodolfo

    2013-05-01

    The International Atomic Energy Agency's (IAEA) programme in human health aims to enhance the capabilities in Member States to address needs related to the prevention, diagnosis, and treatment of diseases through the application of nuclear techniques. It has the specific mission of fostering the application of nuclear medicine techniques as part of the clinical management of certain types of diseases. Attuned to the continuous evolution of this specialty as well as to the advancement and diversity of methods in delivering capacity building efforts in this digital age, the section of nuclear medicine of the IAEA has enhanced its program by incorporating online educational resources for nuclear medicine professionals into its repertoire of projects to further its commitment in addressing the needs of its Member States in the field of nuclear medicine. Through online educational resources such as the Human Health Campus website, e-learning modules, and scheduled interactive webinars, a validation of the commitment by the IAEA in addressing the needs of its Member States in the field of nuclear medicine is strengthened while utilizing the advanced internet and communications technology which is progressively becoming available worldwide. The Human Health Campus (www.humanhealth.iaea.org) is the online educational resources initiative of the Division of Human Health of the IAEA geared toward enhancing professional knowledge of health professionals in radiation medicine (nuclear medicine and diagnostic imaging, radiation oncology, and medical radiation physics), and nutrition. E-learning modules provide an interactive learning environment to its users while providing immediate feedback for each task accomplished. Webinars, unlike webcasts, offer the opportunity of enhanced interaction with the learners facilitated through slide shows where the presenter guides and engages the audience using video and live streaming. This paper explores the IAEA's available online

  15. IAEA SAFEGUARDS DURING PLUTONIUM STABILIZATION AT HANFORDS PLUTONIUM FINISHING PLANT (PFP)

    SciTech Connect

    MCRAE, L.P.

    2004-02-20

    The Vault at the Plutonium Finishing Plan (PFP) became subject to the International Atomic Energy Agency (IAEA) safeguards beginning in 1994 as part of the US excess fissile material program. The inventory needed to be stabilized and repackaged for long-term storage to comply with Defense Nuclear Facilities Safety Board Recommendation 94-1. In 1998, the United States began negotiations with IAEA to develop methods to maintain safeguards as this material was stabilized and repackaged. The Design Information Questionnaire was revised and submitted to the IAEA in 2002 describing how PFP would be modified to accommodate the stabilization process line. The operation plan for 2003 was submitted describing the proposed schedules for removing materials for stabilization. Stabilization and repackaging activities for the safeguarded plutonium began in January 2003 and were completed in December 2003. The safeguards approach implemented at the Hanford Site was a combination of the original baseline approach augmented by a series of five vault additions of stabilized materials followed by five removals of unstabilized materials. IAEA containment and surveillance measures were maintained until the unstabilized material was removed. Following placement of repackaged material (most from the original safeguarded stock) into the storage vault, the IAEA conducted inventory change verification measurements and then established containment and surveillance. As part of the stabilization campaign, the IAEA developed new measurement methods and calibration standards representative of the materials and packaging. The annual physical inventory verification was conducted on the normal IAEA schedule following the fourth additional/removal phase. Plant activities and the impacts on operations are described.

  16. New Organic Stable Isotope Reference Materials for Distribution through the USGS and the IAEA

    NASA Astrophysics Data System (ADS)

    Schimmelmann, Arndt; Qi, Haiping

    2014-05-01

    The widespread adoption of relative stable isotope-ratio measurements in organic matter by diverse scientific disciplines is at odds with the dearth of international organic stable isotopic reference materials (RMs). Only two of the few carbon (C) and nitrogen (N) organic RMs, namely L-glutamic acids USGS40 and USGS41 [1], both available from the U.S. Geological Survey (USGS) and the International Atomic Energy Agency (IAEA), provide an isotopically contrasting pair of organic RMs to enable essential 2-point calibrations for δ-scale normalization [2, 3]. The supply of hydrogen (H) organic RMs is even more limited. Numerous stable isotope laboratories have resorted to questionable practices, for example by using 'CO2, N2, and H2 reference gas pulses' for isotopic calibrations, which violates the principle of identical treatment of sample and standard (i.e., organic unknowns should be calibrated directly against chemically similar organic RMs) [4], or by using only 1 anchor instead of 2 for scale calibration. The absence of international organic RMs frequently serves as an excuse for indefensible calibrations. In 2011, the U.S. National Science Foundation (NSF) funded an initiative of 10 laboratories from 7 countries to jointly develop much needed new organic RMs for future distribution by the USGS and the IAEA. The selection of targeted RMs attempts to cover various common compound classes of broad technical and scientific interest. We had to accept compromises to approach the ideal of high chemical stability, lack of toxicity, and low price of raw materials. Hazardous gases and flammable liquids were avoided in order to facilitate international shipping of future RMs. With the exception of polyethylene and vacuum pump oil, all organic RMs are individual, chemically-pure substances, which can be used for compound-specific isotopic measurements in conjunction with liquid and gas chromatographic interfaces. The compounds listed below are under isotopic calibration by

  17. Use of IAEA's phase-space files for the implementation of a clinical accelerator virtual source model.

    PubMed

    Rucci, Alexis; Carletti, Claudia; Cravero, Walter; Strbac, Bojan

    2014-03-01

    In the present work, phase-space data files (phsp) provided by the International Atomic Energy Agency (IAEA) for different accelerators were used in order to develop a Virtual Source Model (VSM) for clinical photon beams. Spectral energy distributions extracted from supplied phsp files were used to define the radiation pattern of a virtual extended source in a hybrid model which is completed with a virtual diaphragm used to simulate both electron contamination and the shape of the penumbra region. This simple virtual model was used as the radiation source for dosimetry calculations in a water phantom. The proposed model proved easy to build and test, and good agreement with clinical accelerators dosimetry measurements were obtained for different field sizes. Our results suggest this simple method could be useful for treatment planning systems (TPS) verification purposes.

  18. The impact of the International Atomic Energy Agency (IAEA) program on radiation and tissue banking in Malaysia.

    PubMed

    Yusof, Norimah; Morales Pedraza, Jorge

    2009-05-01

    The IAEA was instrumental in developing the first Malaysian tissue bank at University Hospital of Universiti Sains Malaysia (HUSM), Kubang Kerian, Kelantan in early 1990s and it was officiated as National Tissue Bank in 1994. Up to date, 38 government and private hospitals have received a supply from the bank. Bone allografts in term of bone chips, morsalised bone and long bones are procured from Malaysian donors. Almost thirty students from Malaysia graduated in the training courses carried out in Singapore since 1998 at regional and interregional levels. Organ donation is more readily accepted by the public at the moments, perhaps due to the vast promotion and advertisement given by the local newspapers and other media, but gradually tissue donation is catching up as well. PMID:18581259

  19. A suggested approach to applying IAEA safeguards to plutonium in weapons components

    SciTech Connect

    Lu, M.S.; Allentuck, J.

    1998-08-01

    It is the announced policy of the United States to make fissile material removed from its nuclear weapons stockpile subject to the US-IAEA voluntary safeguards agreement. Much of this material is plutonium in the form of pits. The application of traditional IAEA safeguards would reveal Restricted Data to unauthorized persons which is prohibited by US law and international treaties. Prior to the availability of a facility for the conversion of the plutonium in the pits to a non-sensitive form this obvious long-term solution to the problem is foreclosed. An alternative near-term approach to applying IAEA safeguards while preserving the necessary degree of confidentiality is required. This paper identifies such an approach. It presents in detail the form of the US declaration; the safeguards objectives which are met; inspection techniques which are utilized and the conclusion which the IAEA could reach concerning the contents of each item and the aggregate of all items. The approach would reveal the number of containers and the aggregate mass of plutonium in a set of n containers presented to the IAEA for verification while protecting data of the isotopic composition and plutonium mass of individual components. The suggested approach provides for traceability from the time the containers are sealed until the conversion of the plutonium to a non-sensitive form.

  20. Vocational and Technical Teacher Preparation in Asia and the Pacific. Report of Two Regional Workshops (Bangkok, Thailand, March 6-28, 1981 and January 28-February 19, 1982).

    ERIC Educational Resources Information Center

    National Inst. for Educational Research, Tokyo (Japan).

    Two workshops on the preparation of teachers for vocational and technical education in Asia and the Pacific were held in 1981 and 1982 in Bangkok, Thailand. During the two meetings, the following activities were carried out: (1) problems faced by the developing countries in preparing teachers, instructors, and teacher educators for vocational and…

  1. Mutual Learning for Sustainability: Relationships between the Technical University of Catalonia (UPC) and Regional Centre of Expertise (RCE) Barcelona from a Systems Perspective

    ERIC Educational Resources Information Center

    Ferrer-Balas, D.; Buckland, H.

    2008-01-01

    Purpose: The purpose of this paper is to explore the relationship between the Technical University of Catalonia (UPC) and RCE-Barcelona in the context of two organisations with a strategic aim to further Education for Sustainable Development. A special emphasis is put in the role that UPC has had in the creation and development of this project,…

  2. Contributing to Tourism Industry Vitality of a Natural Resource Based Region through Educational/Technical Assistance. Staff Paper Series P83-20.

    ERIC Educational Resources Information Center

    Blank, Uel; And Others

    From 1979 to 1982 an extension education program provided assistance to the tourism industry in rural communities adjoining northeastern Minnesota's Boundary Waters Canoe Area (BWCA). Program activities involved needs assessment, educational and technical assistance to communities and tourism-related firms, marketing programs, grants management…

  3. IAEA workshop and field trial at the Oak Ridge K-25 Site

    SciTech Connect

    Hembree, D.M. Jr.; Ross, H.H.; Carter, J.A.

    1995-03-01

    In March 1994, members of the International Safeguards Department in the National Security Program Office (NSPO) hosted an environmental monitoring field trial workshop for International Atomic Energy Agency (IAEA) inspectors. The workshop was held at the Oak Ridge K-25 Site and its primary purpose was to train the inspectors in the techniques needed for effective environmental sample collection and handling. The workshop emphasized both sampling theory and practice. First, detailed techniques for swipe, vegetation, soil, biota, and water-associated sampling were covered in the classroom. Subsequently, the inspectors were divided into three groups for actual sample collection in and around the K-25 locale. The collected samples were processed by the Department of Energy (DOE) Network of Analytical Laboratories using established analytical techniques. This activity is part of the IAEA ``Programme 93+2 in. assessment of measures to enhance IAEA safeguards.

  4. Testing the validity of the International Atomic Energy Agency (IAEA) safety culture model.

    PubMed

    López de Castro, Borja; Gracia, Francisco J; Peiró, José M; Pietrantoni, Luca; Hernández, Ana

    2013-11-01

    This paper takes the first steps to empirically validate the widely used model of safety culture of the International Atomic Energy Agency (IAEA), composed of five dimensions, further specified by 37 attributes. To do so, three independent and complementary studies are presented. First, 290 students serve to collect evidence about the face validity of the model. Second, 48 experts in organizational behavior judge its content validity. And third, 468 workers in a Spanish nuclear power plant help to reveal how closely the theoretical five-dimensional model can be replicated. Our findings suggest that several attributes of the model may not be related to their corresponding dimensions. According to our results, a one-dimensional structure fits the data better than the five dimensions proposed by the IAEA. Moreover, the IAEA model, as it stands, seems to have rather moderate content validity and low face validity. Practical implications for researchers and practitioners are included.

  5. JOINT UNITED STATES/IAEA PROPOSED APPROACH FOR SAFEGUARDS DURING PLUTONIUM STABILIZATION, PACKAGING, AND SHIPMENT

    SciTech Connect

    L. KWEI; B. SMITH; ET AL

    2001-02-01

    For safety reasons, the U.S. Department of Energy (DOE) is preparing to stabilize and package plutonium oxide currently subject to International Atomic Energy Agency safeguards at the Rocky Flats Environmental Technology Site (RFETS) beginning in the year 2001. The Hanford Site will also stabilize and package plutonium materials under IAEA safeguards. The U.S. and the IAEA began consultations in late 1996 to develop an approach to the application of safeguards during stabilization and packaging. With the plans to ship RFETS plutonium to Savannah River for interim storage prior to final disposition, this work has been extended to include safeguards during shipment. This paper will discuss the elements of a joint U.S./IAEA proposal for this task.

  6. A Report to the U.S. Department of Education: Overview and Synthesis of the Regional Advisory Committee Reports on Educational Challenges and Technical Assistance Needs

    ERIC Educational Resources Information Center

    Sheekey, Arthur; Cymrot, Donald J.; Fauntleroy, Corbin

    2005-01-01

    This report provides an overview and synthesis of the ten Regional Advisory Committee (RAC) reports published concurrently. The RACs were created by the U.S. Secretary of Education to conduct a regional educational needs assessment in advance of the competition for a new set of comprehensive assistance centers and regional education laboratories.…

  7. Development of an IAEA Training Course for Future U.S. Inspectors

    SciTech Connect

    Savannah Avgerinos Fitzwater; Amanda R. Rynes; David S. Bracken; Richard R. M. Metcalf; James D. West

    2011-07-01

    U.S. citizens currently make up only 12% of the positions held in the IAEA’s Department of Safeguards. While the United States has maintained a high level of support for the Agency over the duration of its history, the number of American inspectors currently in the field does not reflect this level of involvement. As a result, the National Nuclear Security Administration’s Office of International Relations, as part of the Next Generation Safeguards Initiative (NGSI) mission, has tasked Idaho National Laboratory (INL) to develop a rigorous two week hands-on training program to encourage and operationally acclimatize U.S. Citizens who are interested in applying for IAEA inspector positions using IAEA authorized equipment at INL. Idaho National Laboratory is one-of-a-kind in its ability to train IAEA inspectors by including training at nuclear facilities on site and includes, for example, direct measurement of an active spent fuel storage cooling pond. This accredited course will introduce and train attendees on the major IAEA systems used in collecting nuclear safeguards data and performing safeguards inspections. Unique in the United States, these classes will give attendees direct hands-on training and will address equipment purpose, function, operating principles, application, and troubleshooting, based upon what would be expected of an IAEA Safeguards Inspector in the field and in the office. Upon completion, U.S. applicants will be better qualified to pursue a position in the IAEA Department of Safeguards Operational Divisions. In support, INL has recently established a new laboratory space to house state of the art nuclear safeguards instrumentation. Currently, equipment installed in the laboratory space includes attended systems: 3DLR (3-D Imaging Laser) for design information verification, a Digital Cerenkov Viewing Device for measurement of spent fuel, HM-5 handheld radiation detectors, quantitative neutron and gamma systems; unattended monitoring

  8. Health-related monitoring and assessment of airborne particulate matter. An overview of recent IAEA programs.

    PubMed

    Parr, R M; Smodis, B

    1999-01-01

    Since 1992, the International Atomic Energy Agency (IAEA) has been promoting studies of air pollution using a standard design of air sampler that provides separation on filters into two size fractions with cutoffs of 2.5 and 10 microns (approximately). These are the size ranges presently considered to have the most important health consequences. Such filter samples are highly amenable to analysis using nuclear and related techniques. After reviewing some of the health effects of airborne particulate matter and current air quality standards and guidelines, this article provides an overview of current and recent IAEA programs in this area, which involve collaborative activities with participants in more than 40 countries.

  9. RECRUITMENT OF U.S. CITIZENS FOR VACANCIES IN IAEA SAFEGUARDS.

    SciTech Connect

    OCCHIOGROSSO, D.; PEPPER, S.

    2006-07-16

    The International Atomic Energy Agency (IAEA) relies on its member states to assist with recruiting qualified individuals for positions within the IAEA's secretariat. It is likewise important to the U.S. government for U.S. citizens to take positions with the IAEA to contribute to its success. It is important for persons within and outside the U.S. nuclear and safeguards industries to become aware of the job opportunities available at the IAEA and to be informed of important vacancies as they arise. The International Safeguards Project Office (ISPO) at Brookhaven National Laboratory (BNL) is tasked by the U.S. government with recruiting candidates for positions within the Department of Safeguards at the IAEA and since 1998, has been actively seeking methods for improving outreach. In addition, ISPO has been working more closely with the IAEA Division of Personnel. ISPO staff members attend trade shows to distribute information about IAEA opportunities. The shows target the nuclear industry as well as shows that are unrelated to the nuclear industry. ISPO developed a web site that provides information for prospective candidates. They have worked with the IAEA to understand its recruitment processes, to make suggestions for improvements, and to understand employment benefits so they can be communicated to potential U.S. applicants. ISPO is also collaborating with a State Department working group that is focused on increasing U.S. representation within the United Nations as a whole. Most recently Secretary of State Condoleezza Rice issued a letter to all Federal Agency heads encouraging details and transfers of their employees to international organizations to the maximum extent feasible and with due regard to their manpower requirements. She urged all federal agencies to review their detail and transfer policies and practices to ensure that employment in international organizations is promoted in a positive and active manner. In addition, she wrote that it is

  10. Implementation of IAEA safeguards at the Rocky Flats Environmental Technology Site

    SciTech Connect

    Giacomini, J.J.; Finleon, C.A.; Larsen, R.K.; Lucas, M.; Langner, D.

    1995-07-01

    When President Clinton spoke to the United Nations General Assembly in September 1993, he offered to place US excess defense nuclear material under International Atomic Energy Agency (IAEA) safeguards, before the next Nuclear Nonproliferation Treaty (NPT) Extension Conference. This set in motion a flurry of activities at three DOE facilities, including Rocky Flats Environmental Technology Site (Site). With general guidance from DOE Headquarters, the facility selected a suitable storage area, identified appropriate materials, and acquired the necessary instrumentation to implement full-scale IAEA safeguards on excess plutonium oxide.

  11. Implementation of k0-INAA standardisation at ITU TRIGA Mark II research reactor, Turkey based on k0-IAEA software

    NASA Astrophysics Data System (ADS)

    Esen, Ayse Nur; Haciyakupoglu, Sevilay

    2016-02-01

    The purpose of this study is to test the applicability of k0-INAA method at the Istanbul Technical University TRIGA Mark II research reactor. The neutron spectrum parameters such as epithermal neutron flux distribution parameter (α), thermal to epithermal neutron flux ratio (f) and thermal neutron flux (φth) were determined at the central irradiation channel of the ITU TRIGA Mark II research reactor using bare triple-monitor method. HPGe detector calibrations and calculations were carried out by k0-IAEA software. The α, f and φth values were calculated to be -0.009, 15.4 and 7.92·1012 cm-2 s-1, respectively. NIST SRM 1633b coal fly ash and intercomparison samples consisting of clay and sandy soil samples were used to evaluate the validity of the method. For selected elements, the statistical evaluation of the analysis results was carried out by z-score test. A good agreement between certified/reported and experimental values was obtained.

  12. Meeting the challenges of global nuclear medicine technologist training in the 21st century: the IAEA Distance Assisted Training (DAT) program.

    PubMed

    Patterson, Heather E; Nunez, Margarita; Philotheou, Geraldine M; Hutton, Brian F

    2013-05-01

    Many countries have made significant investments in nuclear medicine (NM) technology with the acquisition of modern equipment and establishment of facilities, however, often appropriate training is not considered as part of these investments. Training for NM professionals is continually evolving, with a need to meet changing requirements in the workforce. Even places where established higher education courses are available, these do not necessarily cater to the practical component of training and the ever-changing technology that is central to medical imaging. The continuing advances in NM technology and growth of applications in quantitative clinical assessment place increases the pressure on technologists to learn and practice new techniques. Not only is training to understand new concepts limited but often there is inadequate training in the basics of NM and this can be a major constraint to the effective use of the evolving technology. Developing appropriate training programs for the broader international NM community is one of the goals of the International Atomic Energy Agency (IAEA). A particularly successful and relevant development has been the program on 'distance assisted training (DAT) for NM professionals'. The development of DAT was initiated in the 1990s through Australian Government funding, administered under auspices of the IAEA through its Regional Cooperative Agreement, involving most countries in Asia that are Member States of the IAEA. The project has resulted in the development of a set of training modules which are designed for use under direct supervision in the workplace, delivered through means of distance-learning. The program has undergone several revisions and peer reviews with the current version providing a comprehensive training package that is now available online. DAT has been utilized widely in Asia or the Pacific region, Latin America, and parts of Africa and Europe. Currently there are approximately 1000 registered participants

  13. Secretary of Energy Steven Chu speaks to the 2009 IAEA General Conference delegation

    SciTech Connect

    Secretary Chu

    2009-09-15

    On Sept. 14, 2009, U.S. Secretary of Energy Steven Chu addressed the 2009 IAEA General Conference delegation. Chu is the first Cabinet official to discuss President Obama's nuclear security and nonproliferation agenda outside the United States since the President delivered his landmark speech in Prague in April 2009.

  14. Implementation of IAEA /1/INT/054 Project in Nuclear Analytical Techniques Group of Argentina: Current State

    SciTech Connect

    Sara, Resnizky; Rita, Pla; Alba, Zaretzky

    2008-08-14

    This paper presents the implementation of the training received through the IAEA Project 'Preparation of Reference Materials and Organization of Proficiency Tests Rounds' in the Nuclear Analytical (NAT) Group of CNEA. Special emphasis is done on those activities related to the first Proficiency Test being carried out by the NAT Group.

  15. 49 CFR 171.26 - Additional requirements for the use of the IAEA Regulations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Additional requirements for the use of the IAEA Regulations. 171.26 Section 171.26 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION HAZARDOUS MATERIALS REGULATIONS GENERAL INFORMATION, REGULATIONS,...

  16. Analysis of historical delta values for IAEA/LANL NDA training courses

    SciTech Connect

    Geist, William; Santi, Peter; Swinhoe, Martyn; Bonner, Elisa

    2009-01-01

    The Los Alamos National Laboratory (LANL) supports the International Atomic Energy Agency (IAEA) by providing training for IAEA inspectors in neutron and gamma-ray Nondestructive Assay (NDA) of nuclear material. Since 1980, all new IAEA inspectors attend this two week course at LANL gaining hands-on experience in the application of NDA techniques, procedures and analysis to measure plutonium and uranium nuclear material standards with well known pedigrees. As part of the course the inspectors conduct an inventory verification exercise. This exercise provides inspectors the opportunity to test their abilities in performing verification measurements using the various NDA techniques. For an inspector, the verification of an item is nominally based on whether the measured assay value agrees with the declared value to within three times the historical delta value. The historical delta value represents the average difference between measured and declared values from previous measurements taken on similar material with the same measurement technology. If the measurement falls outside a limit of three times the historical delta value, the declaration is not verified. This paper uses measurement data from five years of IAEA courses to calculate a historical delta for five non-destructive assay methods: Gamma-ray Enrichment, Gamma-ray Plutonium Isotopics, Passive Neutron Coincidence Counting, Active Neutron Coincidence Counting and the Neutron Coincidence Collar. These historical deltas provide information as to the precision and accuracy of these measurement techniques under realistic conditions.

  17. ORNL contribution to the IAEA bcnchmark problem on fission reactor decommissioning

    SciTech Connect

    Broadhead, B.L.; Childs, R.L.

    1996-05-01

    Recently the International Atomic Energy Agency (IAEA) selected a benchmark problem for calculation of radioactivity inventories and dose estimates necessary for fission reactor decommissioning. Several researchers were invited to participate in the solution of this benchmark problem set. The contribution from Oak Ridge National Laboratory (ORNL) is presented in this paper.

  18. Secretary of Energy Steven Chu speaks to the 2009 IAEA General Conference delegation

    ScienceCinema

    Secretary Chu

    2016-07-12

    On Sept. 14, 2009, U.S. Secretary of Energy Steven Chu addressed the 2009 IAEA General Conference delegation. Chu is the first Cabinet official to discuss President Obama's nuclear security and nonproliferation agenda outside the United States since the President delivered his landmark speech in Prague in April 2009.

  19. Opportunities to more fully utilize safeguards information reported to the IAEA at Gas Centrifuge Enrichment Plants

    SciTech Connect

    Garner, James R; Whitaker, J Michael

    2015-01-01

    In an effort to increase transparency and to strengthen IAEA safeguards, more countries are adopting practices that provide the IAEA with more timely, safeguards-relevant information to confirm nuclear operations are as declared. At Gas Centrifuge Enrichment Plants (GCEPs) potential examples include installing unattended IAEA instruments that transmit selected information back to Vienna, instruments that collect and store measurement information on-site, and daily facility operator submissions of material receipts, shipments, or utilization of key operational systems (e.g., UF6 feed stations) to on-site mail boxes. Recently the IAEA has implemented the use of on-site mailbox systems supplemented with short notice or unannounced inspections to maintain effectiveness without significantly increasing the number of inspection days. While these measures significantly improves the IAEA’s effectiveness, we have identified several opportunities for how the use of this information could be improved and how some additional information would further improve safeguards. This paper presents concepts for how the safeguards information currently collected at GCEPs could be more effectively utilized through enhancing the way that raw data is displayed visually so that it is more intuitive to the inspector and provides for more effective inspection planning and execution, comparing information with previous IAEA inspection activities (lists of previous verified inventory), through comparing data with operator supplied data when inspectors arrive (notional inventory change reports), and through evaluating the data over time to provide even greater confidence in the data and operations as declared in between inspections. This paper will also discuss several potential improvements to the submissions themselves, such as including occupancy information about product and tails stations and including weight information for each station.

  20. Approach to IAEA material-balance verification with intermittent inspection at the Portsmouth Gas Centrifuge Enrichment Plant

    SciTech Connect

    Gordon, D.M.; Sanborn, J.B.

    1984-05-18

    This paper describes a potential approach by which the International Atomic Energy Agency (IAEA) might verify the nuclear-material balance at the Portsmouth Gas Centrifuge Enrichment Plant (GCEP) for the circumstance in which the IAEA inspections occur on an intermittent basis. The verification approach is a variation of the standard IAEA attributes/variables measurement-verification method. This alternative approach is useful and applicable at the Portsmouth GCEP, which will ship all its product and tails UF/sub 6/ to United States facilities not eligible for IAEA safeguards. The paper reviews some of the relevant results of the Hexapartite Safeguards Project (HSP), describes the standard IAEA material-balance-verification approach for bulk-handling facilities, and provides the procedures to be followed in handling and processing UF/sub 6/ cylinders at the Portsmouth GCEP. The paper then discusses the assumptions made in the approach, and derives a formula for the probability with which the IAEA could detect the diversion of a significant quantity of uranium (75 kg of U-235 in depleted, normal, and low-enriched uranium) if this method were applied. The paper also provides numerical examples of IAEA detection probability should the operator divert uranium from the feed, product, or tails streams for the Portsmouth GCEP with a capacity of 1100 tonnes of separative work per year.

  1. Calibrated sulfur isotope abundance ratios of three IAEA sulfur isotope reference materials and V-CDT with a reassessment of the atomic weight of sulfur

    NASA Astrophysics Data System (ADS)

    Ding, T.; Valkiers, S.; Kipphardt, H.; De Bièvre, P.; Taylor, P. D. P.; Gonfiantini, R.; Krouse, R.

    2001-09-01

    Calibrated values have been obtained for sulfur isotope abundance ratios of sulfur isotope reference materials distributed by the IAEA (Vienna). For the calibration of the measurements, a set of synthetic isotope mixtures were prepared gravimetrically from high purity Ag 2S materials enriched in 32S, 33S, and 34S. All materials were converted into SF 6 gas and subsequently, their sulfur isotope ratios were measured on the SF 5+ species using a special gas source mass spectrometer equipped with a molecular flow inlet system (IRMM's Avogadro II amount comparator). Values for the 32S/ 34S abundance ratios are 22.650 4(20), 22.142 4(20), and 23.393 3(17) for IAEA-S-1, IAEA-S-2, and IAEA-S-3, respectively. The calculated 32S/ 34S abundance ratio for V-CDT is 22.643 6(20), which is very close to the calibrated ratio obtained by Ding et al. (1999). In this way, the zero point of the VCDT scale is anchored firmly to the international system of units SI. The 32S/ 33S abundance ratios are 126.942(47), 125.473(55), 129.072(32), and 126.948(47) for IAEA-S-1, IAEA-S-2, IAEA-S-3, and V-CDT, respectively. In this way, the linearity of the V-CDT scale is improved over this range. The values of the sulfur molar mass for IAEA-S-1 and V-CDT were calculated to be 32.063 877(56) and 32.063 911(56), respectively, the values with the smallest combined uncertainty ever reported for the sulfur molar masses (atomic weights).

  2. Chlordane (Technical)

    Integrated Risk Information System (IRIS)

    Chlordane ( Technical ) ; CASRN 12789 - 03 - 6 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Assessments for Noncarc

  3. Technical Mathematics.

    ERIC Educational Resources Information Center

    Flannery, Carol A.

    This manuscript provides information and problems for teaching mathematics to vocational education students. Problems reflect applications of mathematical concepts to specific technical areas. The materials are organized into six chapters. Chapter 1 covers basic arithmetic, including fractions, decimals, ratio and proportions, percentages, and…

  4. Regional operations research program for commercialization of geothermal energy in the Rocky Mountain basin and range. Final technical report, January 1980-March 1981

    SciTech Connect

    Not Available

    1981-07-01

    This report describes the work accomplished from January 1980 to March 1981 in the Regional Operations Research efforts for the Rocky Mountain Basin and Range Geothermal Commercialization Program. The work included continued data acquisition and extension of the data base, enhancement and refinement of the economic models for electric and direct use applications, site-specific and aggregated analyses in support of the state teams, special analyses in support of several federal agencies, and marketing assistance to the state commercialization teams.

  5. Environmental and economic assessment of discharges from Gulf of Mexico Region oil and gas operations. Quarterly technical progress report, 23 June 1992--30 September 1992

    SciTech Connect

    Gettleson, D.A.

    1992-11-10

    A Sampling and Analysis Plan was prepared and submitted to a Scientific Review Committee for comment. Substantial comments relative to study objectives, sampling design, and sampling periods coupled with the passage of Hurricane Andrew precluded the scheduled initiation of sampling at offshore and coastal sites (Tasks 3 -- Environmental Field Sampling and Analysis of Naturally Occurring Radioactive Materials (NORM), Heavy Metals, and Organics and 4 -- Monitoring of the Recovery of Impacted Wetland and Open Bay Produced Water Discharge Sites in Coastal Louisiana and Texas). A proposed revised schedule has been prepared for Tasks 3 and 4. Task 5 (Assessment of Economic Impacts of Offshore and Coastal Discharge Requirements on Present and Future Operations in the Gulf of Mexico Region), activities have involved identification and collection of the necessary data for the economic analysis. Task 6 (Synthesis of Gulf of Mexico Region Consumption and Use Patterns), activities have included near completion of the literature review and a reevaluation of the data collection efforts relative to the wholesaler, process plant, and restaurant components. Task 7 (Technology Transfer Plan), work has been delayed due to the Tasks 3 and 4 delay and cancellation of the annual US Minerals Management Service Gulf of Mexico Region Information Transfer Meeting.

  6. Neutron activation analysis of NBS oyster tissue (SRM 1566) and IAEA animal bone (H-5)

    SciTech Connect

    Lepel, E.A.; Laul, J.C.

    1983-10-01

    Data have been presented for 35 elements determined by INAA for NBS oyster tissue (SRM 1566) and for 38 elements determined by INAA and RNAA for IAEA animal bone (H-5). The experimental data showed excellent agreement with published values wherever the comparison exists. Additional trace-element data in the ppb range have been presented for the elements Sc, Sb, Cs, La, Ce, Nd, Sm, Eu, Tb, Dy, Ho, Yb, Lu, Hf, Ta, W and Th in NBS oyster tissue. Also, additional trace-element data for IAEA animal bone (H-5) in the ppb range for the elements Al, Sc, Co, Rb, Cs, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Tm, Yb, lu, Hf, Ta and Th have been presented.

  7. Gamma techniques for IAEA (International Atomic Energy Agency) safeguards at centrifuge enrichment cascades

    SciTech Connect

    Aaldijk, J.K.; de Betue, P.A.C.; van der Meer, K.; Harry, R.J.S.

    1987-01-01

    On February 4, 1983, the Hexapartite Safeguards Project (HSP) concluded that the safeguards approach involving limited frequency unannounced access (LFUA) by International Atomic Energy Agency (IAEA) inspectors to cascades areas together with inspection activities outside the cascade areas meets the IAEA safeguards objectives in an effective and efficient way. In this way, the risks of revealing sensitive information were also minimized. The approach has been defined clearly and unambiguously, and it should be applied equally to all technology holders. One of the conclusions of the HSP was that a nondestructive assay go/no-go technique should be used during the LFUA inspections in the cascade areas of centrifuge enrichment plants. The purpose is to verify that the enrichment of the product UF{sub 6} gas is in the range of low-enriched uranium (LEU), i.e., the enrichment is below 20%.

  8. Towards a tactical nuclear weapons treaty? Is There a Role of IAEA Tools of Safeguards?

    SciTech Connect

    Saunders, Emily C.; Rowberry, Ariana N.; Fearey, Bryan L.

    2012-07-12

    In recent years, there is growing interest in formal negotiations on non-strategic or tactical nuclear weapons. With the negotiations of New START, there has been much speculation that a tactical nuclear weapons treaty should be included in the follow on to New START. This paper examines the current policy environment related to tactical weapons and some of the issues surrounding the definition of tactical nuclear weapons. We then map out the steps that would need to be taken in order to begin discussions on a tactical nuclear weapons treaty. These steps will review the potential role of the IAEA in verification of a tactical nuclear weapons treaty. Specifically, does IAEA involvement in various arms control treaties serve as a useful roadmap on how to overcome some of the issues pertaining to a tactical nuclear weapons treaty?

  9. Use of IAEA's phase-space files for virtual source model implementation: Extension to large fields.

    PubMed

    Rucci, Alexis; Carletti, Claudia; Cravero, Walter; Strbac, Bojan

    2016-08-01

    In a previous work, phase-space data files (phsp) provided by the International Atomic Energy Agency (IAEA) were used to develop a hybrid virtual source model (VSM) for clinical photon beams. Very good agreement with dosimetric measurements performed on linear accelerators was obtained for field sizes up to 15×15cm(2). In the present work we extend the VSM to larger field sizes, for which phsp are not available. We incorporate a virtual flattening filter to our model, which can be determined from dose measurements for larger fields. In this way a fully functional VSM can be built, from publicly available IAEA's phsps and standard dose measurements, for fields of any size and tailored to a particular linac. PMID:27423827

  10. The US Support Program Assistance to the IAEA Safeguards Information Technology, Collection, and Analysis 2008

    SciTech Connect

    Tackentien,J.

    2008-06-12

    One of the United States Support Program's (USSP) priorities for 2008 is to support the International Atomic Energy Agency's (IAEA) development of an integrated and efficient safeguards information infrastructure, including reliable and maintainable information systems, and effective tools and resources to collect and analyze safeguards-relevant information. The USSP has provided funding in support of this priority for the ISIS Re-engineering Project (IRP), and for human resources support to the design and definition of the enhanced information analysis architecture project (nVision). Assistance for several other information technology efforts is provided. This paper will report on the various ongoing support measures undertaken by the USSP to support the IAEA's information technology enhancements and will provide some insights into activities that the USSP may support in the future.

  11. GROUND-WATER TECHNICAL SUPPORT CENTER

    EPA Science Inventory

    This flyer describes the objectives and activities of the Ground-Water Technical Support Center, which is part of the Ground Water and Ecosystems Restoration Division. It is directed toward technical audiences (EPA Regions and State regulators within the Regions) and will be use...

  12. The Mailbox Computer System for the IAEA verification experiment on HEU downlending at the Portsmouth Gaseous Diffusion Plant

    SciTech Connect

    Aronson, A.L.; Gordon, D.M.

    2000-07-31

    IN APRIL 1996, THE UNITED STATES (US) ADDED THE PORTSMOUTH GASEOUS DIFFUSION PLANT TO THE LIST OF FACILITIES ELIGIBLE FOR THE APPLICATION OF INTERNATIONAL ATOMIC ENERGY AGENCY (IAEA) SAFEGUARDS. AT THAT TIME, THE US PROPOSED THAT THE IAEA CARRY OUT A ''VERIFICATION EXPERIMENT'' AT THE PLANT WITH RESPECT TO DOOWNBLENDING OF ABOUT 13 METRIC TONS OF HIGHLY ENRICHED URANIUM (HEU) IN THE FORM OF URANIUM HEXAFLUROIDE (UF6). DURING THE PERIOD DECEMBER 1997 THROUGH JULY 1998, THE IAEA CARRIED OUT THE REQUESTED VERIFICATION EXPERIMENT. THE VERIFICATION APPROACH USED FOR THIS EXPERIMENT INCLUDED, AMONG OTHER MEASURES, THE ENTRY OF PROCESS-OPERATIONAL DATA BY THE FACILITY OPERATOR ON A NEAR-REAL-TIME BASIS INTO A ''MAILBOX'' COMPUTER LOCATED WITHIN A TAMPER-INDICATING ENCLOSURE SEALED BY THE IAEA.

  13. [IAEA Training Course Series TCS-37 Clinical Training of Medical Physicists Specializing in Radiation Oncology].

    PubMed

    Imamura, Kiyonari

    2015-01-01

    Training program IAEA TCS-37 (Training course series No.37) "Clinical Training of Medical Physicists Specializing in Radiation Oncology (2009)" was fixed to practical training syllabus at faculty and graduate course of medical physics of a university. TCS-47 for diagnostic radiology (2010) and TCS-50 for nuclear medicine (2011) were also involved in the syllabus. These training courses had been developed by IAEA RCA RAS6038 project since 2002. In this paper, first, comparison with other training programs in the world was made in terms of (1) Degree of extent of subject or field, (2) Concreteness or specificity, (3) Degree of completion, (4) Method of certification and (5) Practicability. IAEA TCS series got the most points among ten programs such as EMERALD/EMIT, AAPM rpt.No.90 and CAMPEP accredited programs. Second, TCS-37, TCS47 and TCS50 were broken down to 6, 5 and 6 subjects of training course respectively. Third, each subject was further broken down to 15 times of training schedule where every time was composed by 3 hours of training. Totally 45 hours of a subject were assigned to one semester for getting one unit of credit. Seventeen units should be credited up to three years in graduate course to finish the whole program. PMID:26882699

  14. The U.S./IAEA Workshop on Software Sustainability for Safeguards Instrumentation

    SciTech Connect

    Pepper S. E.; .; Worrall, L.; Pickett, C.; Bachner, K.; Queirolo, A.

    2014-08-08

    The U.S. National Nuclear Security Administration’s Next Generation Safeguards Initiative, the U.S. Department of State, and the International Atomic Energy Agency (IAEA) organized a a workshop on the subject of ”Software Sustainability for Safeguards Instrumentation.” The workshop was held at the Vienna International Centre in Vienna, Austria, May 6-8, 2014. The workshop participants included software and hardware experts from national laboratories, industry, government, and IAEA member states who were specially selected by the workshop organizers based on their experience with software that is developed for the control and operation of safeguards instrumentation. The workshop included presentations, to orient the participants to the IAEA Department of Safeguards software activities related to instrumentation data collection and processing, and case studies that were designed to inspire discussion of software development, use, maintenance, and upgrades in breakout sessions and to result in recommendations for effective software practices and management. This report summarizes the results of the workshop.

  15. Regional Operations Research Program for Commercialization of Geothermal Energy in the Rocky Mountain Basin and Range. Final Technical Report, January 1980--March 1981

    SciTech Connect

    1981-07-01

    This report describes the work accomplished from January 1980 to March 1981 in the Regional Operations Research efforts for the Rocky Mountain Basin and Range Geothermal Commercialization Program. The scope of work is as described in New Mexico State University Proposal 80-20-207. The work included continued data acquisition and extension of the data base, enhancement and refinement of the economic models for electric and direct use applications, site-specific and aggregated analyses in support of the state teams, special analyses in support of several federal agencies, and marketing assistance to the state commercialization teams.

  16. A comparison of the PARET/ANL and RELAP5/MOD3 codes for the analysis of IAEA benchmark transients

    SciTech Connect

    Woodruff, W.L.; Hanan, N.A.; Smith, R.S.; Matos, J.E.

    1996-12-31

    The PARET/ANL and RELAP5/MOD3 codes are used to analyze the series of benchmark transients specified for the IAEA Research Reactor Core Conversion Guidebook (IAEA-TECDOC-643, Vol. 3). The computed results for these loss-of-flow and reactivity insertion transients with scram are in excellent agreement and agree well with the earlier results reported in the guidebook. Attempts to also compare RELAP5/MOD3 with the SPERT series of experiments are in progress.

  17. The Independent Technical Analysis Process

    SciTech Connect

    Duberstein, Corey A.; Ham, Kenneth D.; Dauble, Dennis D.; Johnson, Gary E.

    2007-04-13

    The Bonneville Power Administration (BPA) contracted with the Pacific Northwest National Laboratory (PNNL) to provide technical analytical support for system-wide fish passage information (BPA Project No. 2006-010-00). The goal of this project was to produce rigorous technical analysis products using independent analysts and anonymous peer reviewers. In the past, regional parties have interacted with a single entity, the Fish Passage Center to access the data, analyses, and coordination related to fish passage. This project provided an independent technical source for non-routine fish passage analyses while allowing routine support functions to be performed by other well-qualified entities.

  18. Response of the US EPA (Environmental Protection Agency) region 5 states to the nonpoint source reporting requirements of the 1987 Clean Water Act amendments. Technical report

    SciTech Connect

    Hautman, N.

    1988-01-01

    This report attempts to determine the extent of nonpoint source pollution in Region V. The report analyzes and summarizes the nonpoint source and clean lakes reports required under the Clean Water Act amendments of 1987. The reports share common elements such as a focus on agricultural sources and the use of hard data as well as professional judgment. However, they differ in overall design, definitions of key elements, level of analysis, thoroughness, and effectiveness. The summary considers the reports from two aspects: structure and the extent to which they comply with Sec. 319 and U.S. EPA reports as they are constructed. Information in the 305 (b) reports adds to the scope of each state's nonpoint source program and is referred to here. Following the summary is a discussion, accompanied by appropriate tables, of the nonpoint source pollution extent.

  19. Final Technical Report for Collaborative Research: Regional climate-change projections through next-generation empirical and dynamical models, DE-FG02-07ER64429

    SciTech Connect

    Smyth, Padhraic

    2013-07-22

    This is the final report for a DOE-funded research project describing the outcome of research on non-homogeneous hidden Markov models (NHMMs) and coupled ocean-atmosphere (O-A) intermediate-complexity models (ICMs) to identify the potentially predictable modes of climate variability, and to investigate their impacts on the regional-scale. The main results consist of extensive development of the hidden Markov models for rainfall simulation and downscaling specifically within the non-stationary climate change context together with the development of parallelized software; application of NHMMs to downscaling of rainfall projections over India; identification and analysis of decadal climate signals in data and models; and, studies of climate variability in terms of the dynamics of atmospheric flow regimes.

  20. Water-quality assessment of DOD installations/facilities in the Chesapeake Bay Region. Phase 3. Volume 1. Summary. Technical report, 1985-1987

    SciTech Connect

    Not Available

    1987-11-01

    This report represents the culmination of a two-year, three-phase effort to determine the relative impact of DOD activities on the water quality and living resource of the Chesapeake Bay. Phase I defined the recent historical and present pollution potential of all 66 DOD installations in the Bay's drainage basin, and developed a preliminary screening procedure to categorize these installations according to existing or potential impacts on the Bay and its tributaries. Phase II developed and tested a detailed assessment methodology on six installations to define the character and extent of their impact on the Bay. Phase III applied this test-bed methodology to the remaining 31 installations identified in Phase I as needing more-detailed assessment, and summarizes impacts and program recommendations from an installation, regional, and Bay-wide perspective. This volume presents summary information from this analysis.

  1. Water-quality assessment of DOD installations/facilities in the Chesapeake Bay Region. Phase 3. Volume 2. Overall approach, findings and recommendations. Technical report, 1985-1987

    SciTech Connect

    Not Available

    1987-11-01

    This report represents the culmination of a two-year, three-phase effort to determine the relative impact of DOD activities on the water quality and living resources of the Chesapeake Bay. Phase I defined the recent historical and present pollution potential of all 66 DOD installations in the Bay's drainage basin, and developed a preliminary screening procedure to categorize these installations according to existing or potential impacts on the Bay and its tributaries. Phase II developed and tested a detailed assessment methodology on six installations to define the character and extent of their impact on the Bay. Phase III applied this tested methodology to the remaining 31 installations identified in Phase I as needing more detailed assessment, and summarizes impacts and program recommendations from an installation, regional, and Bay-wide perspective. This volume presents detailed results of this analysis.

  2. Vari-ro (trade name) `low energy` desalting for the San Diego region. Preliminary research study. Final technical report. Water treatment technology program report No. 4

    SciTech Connect

    Childs, W.D.; Dabiri, A.E.

    1995-07-01

    This Water Treatment Technology Program research study shows the feasibility to reduce the cost of desalting seawater by using the VARI-RO system, which is more efficient and environmentally attractive than ` Existing Methods`. The VARI-RO system is an integrated pumping and energy recovery method for seawater and brackish water reverse osmosis (SWRO) & (BWRO) desalting projects. The study validated that significant electric power reduction is achievable as compared to conventional centrifugal/turbine methods. As compared to these methods, a power reduction of 5.2 MW (a 30% savings) was projected; and as compared to the California State Water Project (SWP) a reduction of 4.2 MW (22% savings) was projected. These savings projections were based on a 30 MGD (113,550 cubic m/d) capacity SWRO facility. This means that desalting seawater can be less energy intensive than importing water from Northern California to the San Diego region via the SWP.

  3. Environmental and economic assessment of discharges from Gulf of Mexico Region oil and gas operations. Quarterly technical progress report, 1 October--31 December 1992

    SciTech Connect

    Gettleson, D.A.

    1993-01-18

    Tasks 3 (Environmental Field Sampling and Analysis of naturally occurring radioactive materials (NORM), Heavy Metals, and Organics) and 4 (Monitoring of the Recovery of Impacted Wetland and Open Bay Produced Water Discharge Sites in Coastal Louisiana and Texas) activities have included the narrowing of the list of potential offshore platforms for study off Louisiana and Texas and a preliminary selection of three coastal sites in Louisiana. After an extensive search effort, it was concluded that no coastal sites are available in Texas. A meeting was held between the contractor, Department of Energy (DOE), and Brookhaven National Laboratory (BNL) personnel to discuss potential sites and sampling designs. A letter was sent to the Scientific Review Committee (SRC) providing a general description of the revised site selection process and sampling designs. Task 5 (Assessment of Economic Impacts of Offshore and Coastal Discharge Requirements on Present and Future Operations in the Gulf of Mexico Region) activities included continued evaluation of data types available for the economic analysis. Historical field basis data were acquired. The identification of permitted discharge points was also initiated. Task 6 (Synthesis of Gulf of Mexico Seafood Consumption and Use Patterns) activities have involved the completion of the literature review. Drafts of the fisherman and wholesaler surveys were prepared. It was determined with DOE and BNL personnel that the retailer survey would be eliminated and a subsistence fisherman survey would be added. Task 7 (Technology Transfer Plan) work has been delayed due to the Tasks 3 and 4 delay and cancellation of the annual US Minerals Management Service (MMS) Gulf of Mexico Region Information Transfer Meeting. Task 8 (Project Management and Deliverables) activities have involved the submission of the necessary reports and routine management.

  4. Environmental and economic assessment of discharges from Gulf of Mexico region oil and gas operations. Quarterly technical progress report, April 1995--June 1995

    SciTech Connect

    Gettleson, D.A.

    1995-07-31

    Progress is described on the determination of environmental impacts from waste discharges to the aquatic ecosystems from oil and gas operations. Task 2 (Preparation of the Sampling and Analysis Plan) activities involved revisions and additions to the Sampling and Analysis Plan. Task 3 (Environmental Field Sampling and Analysis of NORM, Heavy Metals, and Organics) work included analyses of water, sediment, and tissue samples as well as data management. Task 4 (Monitoring of the Recovery of Impacted Wetland and Open Bay Produced Water Discharge Sites in Coastal Louisiana and Texas) activities involved the continued analyses of samples and conducting field sampling at Bay de Chene. Task 5 (Assessment of Economic Impacts of Offshore and Coastal Discharge Requirements on Present and Future Operations in the Gulf of Mexico Region) activities included preparing a draft final report and review by the Scientific Review Committee (SRC). Task 6 (Synthesis of Gulf of Mexico Seafood Consumption and Use Patterns) work involved the preparation of the draft final report and review by the SRC. Task 7 (Technology Transfer Plan) activities involved the presentation of four papers. Task 8 (Project Management and Deliverables) activities involved the submission of the necessary reports and routine management.

  5. Environmental and economic assessment of discharges from Gulf of Mexico Region Oil and Gas Operations. Quarterly technical progress report, 1 October--31 December 1993

    SciTech Connect

    Gettleson, D.A.

    1994-01-28

    Task 2 (Preparation of the Sampling and Analysis Plan) activities involved the incorporation of the offshore site selection process into the Sampling and Analysis Plan. Task 3 (Environmental Field Sampling and Analysis of NORM, Heavy Metals, and Organics) work included making decisions on tissue analyses and performing analyses of water and sediment samples. Task 4 (Monitoring of the Recovery of Impacted Wetland and Open Bay Produced Water Discharge Sites in Coastal Louisiana and Texas) activities involved the completion of the spring benthos samples collection on pre-termination samples at Four Isle Dome and the first post-termination samples at Delacroix Island. Task 5 (Assessment of Economic Impacts of Offshore and Coastal Discharge Requirements on Present and Future Operations in the Gum of Mexico Region) activities included continued work on development of a base case production forecast, modeling future production, and determining economic impact of treatment technologies. Task 6 (Synthesis of Gulf of Mexico Seafood Consumption and Use Patterns) work involved the completion of the fall survey season and the initiation of the survey data assembly. Task 7 (Technology Transfer Plan) activities included presentations at the Society of Environmental Toxicology and Chemistry annual meeting and Minerals Management Service Information Transfer Meeting. Task 8 (Project Management and Deliverables) activities involved the submission of the necessary reports and routine management.

  6. Comparison of the air kerma standards of the IAEA and the BIPM in mammography x-rays

    NASA Astrophysics Data System (ADS)

    Kessler, C.; Burns, D. T.; Czap, L.; Csete, I.; Gomola, I.

    2013-01-01

    The Dosimetry Laboratory of the International Atomic Energy Agency (IAEA), Seibersdorf, Austria, calibrates reference standards in mammography x-ray beams for IAEA/WHO SSDL Network members (more than 80 laboratories worldwide). As a signatory of the Mutual Recognition Arrangement (CIPM MRA), the IAEA laboratory maintains a Quality Management System (QMS) complying with ISO 17025 and requires updated 'supporting evidence' for its dosimetry calibration and measurement capabilities (CMC), first published in Appendix C of the CIPM MRA key comparison database in 2007. For this purpose, an indirect comparison has been made between the air kerma standards of the IAEA and the Bureau International des Poids et Mesures (BIPM) in the mammography x-ray range from 25 kV to 35 kV, using as transfer instruments two thin-window parallel-plate ionization chambers belonging to the IAEA. The IAEA and BIPM standards for mammography x-rays are shown to be in agreement within the standard uncertainty of the comparison of 5.5 parts in 103. This agreement can be used to support the calibration and measurements capabilities of the IAEA listed in Appendix C of the key comparison database. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  7. International contributions to IAEA-NEA heat transfer databases for supercritical fluids

    SciTech Connect

    Leung, L. K. H.; Yamada, K.

    2012-07-01

    An IAEA Coordinated Research Project on 'Heat Transfer Behaviour and Thermohydraulics Code Testing for SCWRs' is being conducted to facilitate collaboration and interaction among participants from 15 organizations. While the project covers several key technology areas relevant to the development of SCWR concepts, it focuses mainly on the heat transfer aspect, which has been identified as the most challenging. Through the collaborating effort, large heat-transfer databases have been compiled for supercritical water and surrogate fluids in tubes, annuli, and bundle subassemblies of various orientations over a wide range of flow conditions. Assessments of several supercritical heat-transfer correlations were performed using the complied databases. The assessment results are presented. (authors)

  8. Reference Material for Radionuclides in Sediment, IAEA-384 (Fangataufa Lagoon Sediment)

    SciTech Connect

    Povinec, P; Pham, M; Barci-Funel, G; Bojanawski, R; Boshkova, T; Burnett, W; Carvalho, F; Chapeyron, B; Cunha, I; Dahlgaard, H; Galabov, N; Gastaud, J; Geering, J; Gomez, I; Green, N; Hamilton, T; Ibanez, F; Majah, M I; John, M; Kanisch, G; Kenna, T; Kloster, M; Korun, M; Wee Kwong, L L; La Rosa, J; Lee, S; Levy-Palomo, I; Malatova, M; Maruo, Y; Mitchell, P; Murciano, I; Nelson, R; Oh, J; Oregioni, B; Petit, G L; Pettersson, H; Reineking, A; Smedley, P; Suckow, A; der Struijs, T v; Voors, P; Yoshimizu, K; Wyse, E

    2005-09-23

    The IAEA Marine Environment Laboratory (IAEA-MEL) in Monaco has conducted intercomparison exercises on radionuclides in marine samples for many years as part of its contribution to the IAEA's program of Analytical Quality Control Services (AQCS). An important part of the AQCS program has been a production of Reference Materials (RMs) and their provision to radioanalytical laboratories. The RMs have been developed for different marine matrices (sediment, water, biota), with accuracy and precision required for the present state of the art of radiometrics and mass spectrometry methods. The RMs have been produced as the final products of world-wide intercomparison exercises organized during last 30 years. A total of 44 intercomparison exercises were undertaken and 39 RMs were produced for radionuclides in the marine environment. All required matrices (seawater, biota, sediment) have been covered with radionuclide concentrations ranging from typical environmental levels to elevated levels affected by discharges from nuclear reprocessing plants. The long-term availability of RMs (over 10 years) requires the use of very specific techniques to collect and pretreat large quantities of material (e.g., in excess of 100 kg) in order to ensure sample stability and homogenization of any analytes of interest. The production of a RM is therefore a long process, covering the identification of needs, sample collection, pre-treatment, homogenization, bottling, distribution to laboratories, evaluation of data, preliminary reporting, additional analyses in expert laboratories, certification of the material, and finally issuing the RM. In this paper we describe a reference material IAEA-384, Fangataufa lagoon sediment, designed for determination of anthropogenic and natural radionuclides in the marine environment. This RM has been prepared with the aim of testing the performance of analytical laboratories to measure the activity of these radionuclides in a sediment sample contaminated

  9. Evaluation and mapping of PM2.5 atmospheric aerosols in Arasia region using PIXE and gravimetric measurements

    NASA Astrophysics Data System (ADS)

    Roumie, M.; Chiari, M.; Srour, A.; Sa'adeh, H.; Reslan, A.; Sultan, M.; Ahmad, M.; Calzolai, G.; Nava, S.; Zubaidi, Th.; Rihawy, M. S.; Hussein, T.; Arafah, D.-E.; Karydas, A. G.; Simon, A.; Nsouli, B.

    2016-03-01

    The present work is a part of a scientific study conducted among several Arab countries in west Asia, under an International Atomic Energy Agency (IAEA) regional technical cooperation project for Arasia region. The project aims at producing for the first time a database of particulate matter (PM) elemental concentrations in the region that will help in future air quality studies in order to identify commonalities and differences in the presence and contribution of fingerprint pollution sources among the Arasia Member States. The first regional campaign was launched simultaneously in Lebanon, Iraq, Jordan, Syria and United Arab Emirates, using a harmonized sampling and analysis protocol of PM10 and PM2.5 samples. Different samples, collected between October 2014 and February 2015, from the participating countries, were analyzed by PIXE technique and gravimetric measurements were also carried out. The first results of the study will be discussed in a regional perspective. Our study shows that concentrations of fine aerosol fractions are often exceeding the WHO standard values as well as showing some disparities in the obtained values between the different sampling sites. However, some trend similarities of variations with time could also be observed, suggesting a common influence by trans-boundary or external sources of air pollution.

  10. International Conference on Advances in Radiation Oncology (ICARO): Outcomes of an IAEA Meeting

    PubMed Central

    2011-01-01

    The IAEA held the International Conference on Advances in Radiation Oncology (ICARO) in Vienna on 27-29 April 2009. The Conference dealt with the issues and requirements posed by the transition from conventional radiotherapy to advanced modern technologies, including staffing, training, treatment planning and delivery, quality assurance (QA) and the optimal use of available resources. The current role of advanced technologies (defined as 3-dimensional and/or image guided treatment with photons or particles) in current clinical practice and future scenarios were discussed. ICARO was organized by the IAEA at the request of the Member States and co-sponsored and supported by other international organizations to assess advances in technologies in radiation oncology in the face of economic challenges that most countries confront. Participants submitted research contributions, which were reviewed by a scientific committee and presented via 46 lectures and 103 posters. There were 327 participants from 70 Member States as well as participants from industry and government. The ICARO meeting provided an independent forum for the interaction of participants from developed and developing countries on current and developing issues related to radiation oncology. PMID:21294881

  11. Experiences using IAEA Code of practice for radiation sterilization of tissue allografts: Validation and routine control

    NASA Astrophysics Data System (ADS)

    Hilmy, N.; Febrida, A.; Basril, A.

    2007-11-01

    Problems of tissue allografts in using International Standard (ISO) 11137 for validation of radiation sterilization dose (RSD) are limited and low numbers of uniform samples per production batch, those are products obtained from one donor. Allograft is a graft transplanted between two different individuals of the same species. The minimum number of uniform samples needed for verification dose (VD) experiment at the selected sterility assurance level (SAL) per production batch according to the IAEA Code is 20, i.e., 10 for bio-burden determination and the remaining 10 for sterilization test. Three methods of the IAEA Code have been used for validation of RSD, i.e., method A1 that is a modification of method 1 of ISO 11137:1995, method B (ISO 13409:1996), and method C (AAMI TIR 27:2001). This paper describes VD experiments using uniform products obtained from one cadaver donor, i.e., cancellous bones, demineralized bone powders and amnion grafts from one life donor. Results of the verification dose experiments show that RSD is 15.4 kGy for cancellous and demineralized bone grafts and 19.2 kGy for amnion grafts according to method A1 and 25 kGy according to methods B and C.

  12. International Conference on Advances in Radiation Oncology (ICARO): outcomes of an IAEA meeting.

    PubMed

    Salminen, Eeva K; Kiel, Krystyna; Ibbott, Geoffrey S; Joiner, Michael C; Rosenblatt, Eduardo; Zubizarreta, Eduardo; Wondergem, Jan; Meghzifene, Ahmed

    2011-02-04

    The IAEA held the International Conference on Advances in Radiation Oncology (ICARO) in Vienna on 27-29 April 2009. The Conference dealt with the issues and requirements posed by the transition from conventional radiotherapy to advanced modern technologies, including staffing, training, treatment planning and delivery, quality assurance (QA) and the optimal use of available resources. The current role of advanced technologies (defined as 3-dimensional and/or image guided treatment with photons or particles) in current clinical practice and future scenarios were discussed.ICARO was organized by the IAEA at the request of the Member States and co-sponsored and supported by other international organizations to assess advances in technologies in radiation oncology in the face of economic challenges that most countries confront. Participants submitted research contributions, which were reviewed by a scientific committee and presented via 46 lectures and 103 posters. There were 327 participants from 70 Member States as well as participants from industry and government. The ICARO meeting provided an independent forum for the interaction of participants from developed and developing countries on current and developing issues related to radiation oncology.

  13. Pantak Therapax SXT 150: performance assessment and dose determination using IAEA TRS-398 protocol.

    PubMed

    Jurado, D; Eudaldo, T; Carrasco, P; Jornet, N; Ruiz, A; Ribas, M

    2005-08-01

    The performance assessment and beam characteristics of the Therapax SXT 150 unit, which encompass both low and medium-energy beams, were evaluated. Dose determination was carried out by implementing the International Atomic Energy Agency (IAEA) TRS-398 protocol and measuring all the dosimetric parameters in order to have a solid, consistent and reliable data set for the unit. Mechanical movements, interlocks and applicator characteristics agreed with specifications. The timer exhibited good accuracy and linearity. The output was very stable, with good repeatability, long-term reproducibility and no dependence on tube head orientation. The measured dosimetric parameters included beam first and second half-value layers (HVLs), absorbed dose rate to water under reference conditions, central axis depth dose distributions, output factors and beam profiles. Measured first HVLs agreed with comparable published data, but the homogeneity coefficients were low in comparison with typical values found in the literature. The timer error was significant for all filters and should be taken into consideration for the absorbed dose rate determination under reference conditions as well as for the calculation of treatment times. Percentage depth-dose (PDD) measurements are strongly recommended for each filter-applicator combination. The output factor definition of the IAEA TRS-398 protocol for medium-energy X-ray qualities involves the use of data that is difficult to measure. Beam profiles had small penumbras and good symmetry and flatness except for the lowest energy beam, for which a heel effect was observed. PMID:16046424

  14. Career Satisfaction Following Technical Education

    ERIC Educational Resources Information Center

    McDonald, Betty Manager

    2011-01-01

    The effect of career and technical education in the Caribbean is an area of intervention research that needs more attention. This present research is the first of its kind within the region. The study benefits from a large sample size (N = 500) conducted among a non-traditional population in the field of career development. This paper reports on…

  15. Vermont Technical Education Commission Report.

    ERIC Educational Resources Information Center

    Vermont State Technical Education Commission, Montpelier.

    A 1968 New England Regional Commission grant to the Vermont Department of Administration financed a feasibility study for a technical college at the postsecondary level. The commission undertook two specific studies: an examination of ultimate career destinations of Vermont secondary students and a survey of Vermont industry to determine immediate…

  16. Reforming Technical and Technological Education.

    ERIC Educational Resources Information Center

    Wilson, David N.

    1993-01-01

    Review of technical and technological educational reform in Brazil, Canada, Germany, Great Britain, Indonesia, Malaysia, Singapore, and Sweden shows that reform takes time to complete effectively, long-term approaches are needed, and reform is linked to industrial development, regional cooperation, and decentralized decision making. (SK)

  17. Assay of scrap plutonium oxide by thermal neutron multiplicity counting for IAEA verification of excess materials from nuclear weapons production

    SciTech Connect

    Stewart, J.E.; Krick, M.S.; Xiao, J.; LeMaire, R.J.; Fotin, V.; McRae, L.; Scott, D.; Westsik, G.

    1996-09-01

    The US Nonproliferation and Export Control Policy commits the US to placing under International Atomic Energy Agency (IAEA) safeguards excess nuclear materials no longer needed for the US nuclear deterrent. As of January 1,1996, the IAEA has completed Initial Physical Inventory Verification (IPIV) at the Oak Ridge Y-12 plant, the Hanford Plutonium Finishing Plant, and a plutonium storage vault at Rock Flats. Two IPIVs were performed at Hanford . This paper reports the results of thermal neutron multiplicity assay of plutonium residues during the second IPIV at Hanford. Using the Three Ring Multiplicity Counter (3RMC), measurements were performed on 69 individual cans of plutonium residues, each containing approximately 1 kg of material. Of the 69 items, 67 passed the IAEA acceptance criteria and two were selected for destructive analysis.

  18. EPA'S GROUND WATER TECHNICAL SUPPORT CENTER

    EPA Science Inventory

    The purpose and the services provided by EPA's Ground Water Technical Support Center (GWTSC) will be presented. In 1987 the Office of Solid Waste and Emergency Response, Regional Waste Management Offices, and ORD established the Technical Support Project (TSP)

    The purpos...

  19. Technical solutions to nonproliferation challenges

    SciTech Connect

    Satkowiak, Lawrence

    2014-05-09

    The threat of nuclear terrorism is real and poses a significant challenge to both U.S. and global security. For terrorists, the challenge is not so much the actual design of an improvised nuclear device (IND) but more the acquisition of the special nuclear material (SNM), either highly enriched uranium (HEU) or plutonium, to make the fission weapon. This paper provides two examples of technical solutions that were developed in support of the nonproliferation objective of reducing the opportunity for acquisition of HEU. The first example reviews technologies used to monitor centrifuge enrichment plants to determine if there is any diversion of uranium materials or misuse of facilities to produce undeclared product. The discussion begins with a brief overview of the basics of uranium processing and enrichment. The role of the International Atomic Energy Agency (IAEA), its safeguard objectives and how the technology evolved to meet those objectives will be described. The second example focuses on technologies developed and deployed to monitor the blend down of 500 metric tons of HEU from Russia's dismantled nuclear weapons to reactor fuel or low enriched uranium (LEU) under the U.S.-Russia HEU Purchase Agreement. This reactor fuel was then purchased by U.S. fuel fabricators and provided about half the fuel for the domestic power reactors. The Department of Energy established the HEU Transparency Program to provide confidence that weapons usable HEU was being blended down and thus removed from any potential theft scenario. Two measurement technologies, an enrichment meter and a flow monitor, were combined into an automated blend down monitoring system (BDMS) and were deployed to four sites in Russia to provide 24/7 monitoring of the blend down. Data was downloaded and analyzed periodically by inspectors to provide the assurances required.

  20. Technical solutions to nonproliferation challenges

    NASA Astrophysics Data System (ADS)

    Satkowiak, Lawrence

    2014-05-01

    The threat of nuclear terrorism is real and poses a significant challenge to both U.S. and global security. For terrorists, the challenge is not so much the actual design of an improvised nuclear device (IND) but more the acquisition of the special nuclear material (SNM), either highly enriched uranium (HEU) or plutonium, to make the fission weapon. This paper provides two examples of technical solutions that were developed in support of the nonproliferation objective of reducing the opportunity for acquisition of HEU. The first example reviews technologies used to monitor centrifuge enrichment plants to determine if there is any diversion of uranium materials or misuse of facilities to produce undeclared product. The discussion begins with a brief overview of the basics of uranium processing and enrichment. The role of the International Atomic Energy Agency (IAEA), its safeguard objectives and how the technology evolved to meet those objectives will be described. The second example focuses on technologies developed and deployed to monitor the blend down of 500 metric tons of HEU from Russia's dismantled nuclear weapons to reactor fuel or low enriched uranium (LEU) under the U.S.-Russia HEU Purchase Agreement. This reactor fuel was then purchased by U.S. fuel fabricators and provided about half the fuel for the domestic power reactors. The Department of Energy established the HEU Transparency Program to provide confidence that weapons usable HEU was being blended down and thus removed from any potential theft scenario. Two measurement technologies, an enrichment meter and a flow monitor, were combined into an automated blend down monitoring system (BDMS) and were deployed to four sites in Russia to provide 24/7 monitoring of the blend down. Data was downloaded and analyzed periodically by inspectors to provide the assurances required.

  1. A survey of IAEA/WHO 60Co TLD postal dose intercomparison exercises during 1985-2003.

    PubMed

    Salman, Ahmad Syed; Mahmood, Khalid; Orfi, Saraj Din

    2005-07-01

    Results of the survey of IAEA/WHO Co postal dose intercomparison exercises in which the Secondary Standard Dosimetry Laboratory participated during the period 1985-2003 are presented. In 14 exercises spread over a period of 19 years, the deviation in therapy dose level measurements of the Secondary Standard Dosimetry Laboratory has never exceeded the International Atomic Energy Agency Dosimetry Laboratory acceptable levels of accuracy. The IAEA/WHO thermoluminescent dosimeter postal dose intercomparison service, the procedure for irradiation of thermoluminescent dosimeters, and the water absorbed dose determination are briefly described.

  2. Analysis of IAEA Environmental Samples for Plutonium and Uranium by ICP/MS in Support Of International Safeguards

    SciTech Connect

    Farmer, Orville T.; Olsen, Khris B.; Thomas, May-Lin P.; Garofoli, Stephanie J.

    2008-05-01

    A method for the separation and determination of total and isotopic uranium and plutonium by ICP-MS was developed for IAEA samples on cellulose-based media. Preparation of the IAEA samples involved a series of redox chemistries and separations using TRU® resin (Eichrom). The sample introduction system, an APEX nebulizer (Elemental Scientific, Inc), provided enhanced nebulization for a several-fold increase in sensitivity and reduction in background. Application of mass bias (ALPHA) correction factors greatly improved the precision of the data. By combining the enhancements of chemical separation, instrumentation and data processing, detection levels for uranium and plutonium approached high attogram levels.

  3. Economic, technical goals drive Asia's space efforts

    NASA Astrophysics Data System (ADS)

    Mecham, Michael

    1994-04-01

    Manned space programs in the Asia/Pacific region at the start of the next century will be shaped by the region's emphasis on economic growth and technical achievement. Japan and China are the main participants in the region. This article describes these programs.

  4. TECHNICAL-VOCATIONAL EDUCATION AND THE COMMUNITY COLLEGE, PROCEEDINGS OF THE ANNUAL LEGISLATIVE WORK CONFERENCE OF THE SOUTHERN REGIONAL EDUCATION BOARD (13TH, WILLIAMSBURG, VIRGINIA, AUGUST 27-29, 1964).

    ERIC Educational Resources Information Center

    Southern Regional Education Board, Atlanta, GA.

    CONFERENCE PARTICIPANTS CONSIDERED FIVE MAJOR THEMES--(1) THE ADOPTION OF AN APPROPRIATE PATTERN FOR TECHNICAL-VOCATIONAL EDUCATION (AREA VOCATIONAL SCHOOLS, TECHNICAL INSTITUTES, SENIOR COLLEGES AND UNIVERSITIES, OR COMMUNITY COLLEGES) DEPENDS UPON THE SYSTEM'S ADEQUACY FOR MEETING COMMUNITY NEEDS, ADAPTABILITY TO CHANGES IN STUDENT PLANS,…

  5. Using Process Load Cell Information for IAEA Safeguards at Enrichment Plants

    SciTech Connect

    Laughter, Mark D; Whitaker, J Michael; Howell, John

    2010-01-01

    Uranium enrichment service providers are expanding existing enrichment plants and constructing new facilities to meet demands resulting from the shutdown of gaseous diffusion plants, the completion of the U.S.-Russia highly enriched uranium downblending program, and the projected global renaissance in nuclear power. The International Atomic Energy Agency (IAEA) conducts verification inspections at safeguarded facilities to provide assurance that signatory States comply with their treaty obligations to use nuclear materials only for peaceful purposes. Continuous, unattended monitoring of load cells in UF{sub 6} feed/withdrawal stations can provide safeguards-relevant process information to make existing safeguards approaches more efficient and effective and enable novel safeguards concepts such as information-driven inspections. The IAEA has indicated that process load cell monitoring will play a central role in future safeguards approaches for large-scale gas centrifuge enrichment plants. This presentation will discuss previous work and future plans related to continuous load cell monitoring, including: (1) algorithms for automated analysis of load cell data, including filtering methods to determine significant weights and eliminate irrelevant impulses; (2) development of metrics for declaration verification and off-normal operation detection ('cylinder counting,' near-real-time mass balancing, F/P/T ratios, etc.); (3) requirements to specify what potentially sensitive data is safeguards relevant, at what point the IAEA gains on-site custody of the data, and what portion of that data can be transmitted off-site; (4) authentication, secure on-site storage, and secure transmission of load cell data; (5) data processing and remote monitoring schemes to control access to sensitive and proprietary information; (6) integration of process load cell data in a layered safeguards approach with cross-check verification; (7) process mock-ups constructed to provide simulated

  6. Certified Reference Material IAEA-446 for radionuclides in Baltic Sea seaweed.

    PubMed

    Pham, M K; Benmansour, M; Carvalho, F P; Chamizo, E; Degering, D; Engeler, C; Gascó, C; Gwynn, J P; Harms, A V; Hrnecek, E; Ibanez, F L; Ilchmann, C; Ikaheimonen, T; Kanisch, G; Kloster, M; Llaurado, M; Mauring, A; Møller, B; Morimoto, T; Nielsen, S P; Nies, H; Norrlid, L D R; Pettersson, H B L; Povinec, P P; Rieth, U; Samuelsson, C; Schikowski, J; Silobritiene, B V; Smedley, P A; Suplinska, M; Vartti, V-P; Vasileva, E; Wong, J; Zalewska, T; Zhou, W

    2014-05-01

    A Certified Reference Material (CRM) for radionuclides in seaweed (Fucus vesiculosus) from the Baltic Sea (IAEA-446) is described and the results of the certification process are presented. The (40)K, (137)Cs, (234)U and (239+240)Pu radionuclides were certified for this material, and information values for 12 other radionuclides ((90)Sr, (99)Tc, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (230)Th, (232)Th, (235)U, (238)U, (239)Pu and (240)Pu) are presented. The CRM can be used for Quality Assurance/Quality Control of analysis of radionuclides in seaweed and other biota samples, as well as for development and validation of analytical methods, and for training purposes.

  7. Certified Reference Material IAEA-446 for radionuclides in Baltic Sea seaweed.

    PubMed

    Pham, M K; Benmansour, M; Carvalho, F P; Chamizo, E; Degering, D; Engeler, C; Gascó, C; Gwynn, J P; Harms, A V; Hrnecek, E; Ibanez, F L; Ilchmann, C; Ikaheimonen, T; Kanisch, G; Kloster, M; Llaurado, M; Mauring, A; Møller, B; Morimoto, T; Nielsen, S P; Nies, H; Norrlid, L D R; Pettersson, H B L; Povinec, P P; Rieth, U; Samuelsson, C; Schikowski, J; Silobritiene, B V; Smedley, P A; Suplinska, M; Vartti, V-P; Vasileva, E; Wong, J; Zalewska, T; Zhou, W

    2014-05-01

    A Certified Reference Material (CRM) for radionuclides in seaweed (Fucus vesiculosus) from the Baltic Sea (IAEA-446) is described and the results of the certification process are presented. The (40)K, (137)Cs, (234)U and (239+240)Pu radionuclides were certified for this material, and information values for 12 other radionuclides ((90)Sr, (99)Tc, (210)Pb ((210)Po), (226)Ra, (228)Ra, (228)Th, (230)Th, (232)Th, (235)U, (238)U, (239)Pu and (240)Pu) are presented. The CRM can be used for Quality Assurance/Quality Control of analysis of radionuclides in seaweed and other biota samples, as well as for development and validation of analytical methods, and for training purposes. PMID:24291528

  8. Databases and coordinated research projects at the IAEA on atomic processes in plasmas

    NASA Astrophysics Data System (ADS)

    Braams, Bastiaan J.; Chung, Hyun-Kyung

    2012-05-01

    The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

  9. IAEA CRP on HTGR Uncertainty Analysis: Benchmark Definition and Test Cases

    SciTech Connect

    Gerhard Strydom; Frederik Reitsma; Hans Gougar; Bismark Tyobeka; Kostadin Ivanov

    2012-11-01

    Uncertainty and sensitivity studies are essential elements of the reactor simulation code verification and validation process. Although several international uncertainty quantification activities have been launched in recent years in the LWR, BWR and VVER domains (e.g. the OECD/NEA BEMUSE program [1], from which the current OECD/NEA LWR Uncertainty Analysis in Modelling (UAM) benchmark [2] effort was derived), the systematic propagation of uncertainties in cross-section, manufacturing and model parameters for High Temperature Reactor (HTGR) designs has not been attempted yet. This paper summarises the scope, objectives and exercise definitions of the IAEA Coordinated Research Project (CRP) on HTGR UAM [3]. Note that no results will be included here, as the HTGR UAM benchmark was only launched formally in April 2012, and the specification is currently still under development.

  10. Using the IAEA Safety Culture Model as a Basis for Security Culture

    SciTech Connect

    De Castro, Kara; Thurmond, Paul; de Boer, Gloria; Mladineo, Stephen V.

    2008-08-01

    In the last ten years, the practice of nuclear material physical protection control and accounting (MPC&A) in Russia has significantly changed. Under the cooperative US-Russian MPC&A Program, the MPC&A Culture Project team has developed the fundamentals of a pilot program to strengthen MPC&A Culture at nuclear sites. The pilot program is based on the IAEA Safety Culture Principles and Model Characteristics. There has been some debate on how easily these are transferable to Security Culture. While there may be operational differences, culture characteristics remain the same. This paper will compare and contrast the two cultures of Safety and Security, taking into consideration the unique characteristics of each discipline.

  11. Databases and coordinated research projects at the IAEA on atomic processes in plasmas

    SciTech Connect

    Braams, Bastiaan J.; Chung, Hyun-Kyung

    2012-05-25

    The Atomic and Molecular Data Unit at the IAEA works with a network of national data centres to encourage and coordinate production and dissemination of fundamental data for atomic, molecular and plasma-material interaction (A+M/PMI) processes that are relevant to the realization of fusion energy. The Unit maintains numerical and bibliographical databases and has started a Wiki-style knowledge base. The Unit also contributes to A+M database interface standards and provides a search engine that offers a common interface to multiple numerical A+M/PMI databases. Coordinated Research Projects (CRPs) bring together fusion energy researchers and atomic, molecular and surface physicists for joint work towards the development of new data and new methods. The databases and current CRPs on A+M/PMI processes are briefly described here.

  12. TECHNICAL REPORT

    SciTech Connect

    ADAMS, RICHARD D., PhD.

    2011-04-06

    Cadmium selenide nanoparticles and nanoclusters were prepared and added to polymer solar cells to improve their photon capture ability. These nanoparticles did exhibit some beneficial effects on the photon conversion efficiencies of selected polymer solar cells. Ternary bulk heterojunction systems based on composites of methyl viologen-doped, CdSe nanoparticles blended with poly (3-hexothiopene) (P3HT) and 6, 6-phenyl C{sub 61}-butyric acid methyl ester (PCBM) were also tested. It was found that the devices with methyl viologen-doped CdSe nanoparticles do produce more photocurrent in a region surrounding the absorption peak of the particles (560 to 660nm) when compared to pristine P3HT:PCBM devices. Gold nanorods were also prepared and tested in some solar cells. These nanorods did produce a very small enhancement in photon absorbance, but the observed increase the photon conversion efficiency was not sufficient to make the effort worthwhile. Our goals were (1) to prepare cadmium sulfide and cadmium selenide clusters and nanoparticles to be tested as photon absorbers to enhance the photon conversion efficiency of polymer solar polymer solar cells and (2) to prepare gold and silver nanorods to be added to polymer solar cells to enhance their photon capture capability. The cadmium sulfide and cadmium selenide nanoparticles and some new nanoclusters were prepared. The cadmium selenide nanoparticles were also tested in solar cells and did exhibit some positive effects when they were combined with certain co-absorbing polymers. Due to solubility problems that were not solved in the available time, the new nanoclusters were not tested in solar cells. Ternary bulk heterojunction systems based on composites of methyl viologen doped, CdSe nanoparticles blended with poly (3-hexothiopene) (P3HT) and 6, 6-phenyl C61-butyric acid methyl ester (PCBM) have been examined in detail. The methyl viologen was added to promote charge separation of the initially formed excitons. It was

  13. On the status of IAEA delta-13C stable isotope reference materials.

    NASA Astrophysics Data System (ADS)

    Assonov, Sergey; Groening, Manfred; Fajgelj, Ales

    2016-04-01

    For practical reasons all isotope measurements are performed on relative scales realized through the use of international, scale-defining primary standards. In fact these standards were materials (artefacts, similar to prototypes of meter and kg) selected based on their properties. The VPDB delta-13C scale is realised via two highest-level reference materials NBS19 and LSVEC, the first defining the scale and the second aimed to normalise lab-to-lab calibrations. These two reference materials (RMs) have been maintained and distributed by IAEA and NIST. The priority task is to maintain these primary RMs at the required uncertainty level, thus ensuring the long-term scale consistency. The second task is to introduce replacements when needed (currently for exhausted NBS19, work in progress). The next is to produce a family of lower level RMs (secondary, tertiary) addressing needs of various applications (with different delta values, in different physical-chemical forms) and their needs for the uncertainty; these RMs should be traceable to the highest level RMs. Presently three is a need for a range of RMs addressing existing and newly emerging analytical techniques (e.g. optical isotopic analysers) in form of calibrated CO2 gases with different delta-13C values. All that implies creating a family of delta-13C stable isotope reference materials. Presently IAEA works on replacement for NBS19 and planning new RMs. Besides, we found that LSVEC (introduced as second anchor for the VPDB scale in 2006) demonstrate a considerable scatter of its delta-13C value which implies a potential bias of the property value and increased value uncertainty which may conflict with uncertainty requirements for atmospheric monitoring. That is not compatible with the status of LSVEC, and therefore it should be replaced as soon as possible. The presentation will give an overview of the current status, the strategic plan of developments and the near future steps.

  14. MANAGING UNCERTAINTIES ASSOCIATED WITH RADIOACTIVE WASTE DISPOSAL: TASK GROUP 4 OF THE IAEA PRISM PROJECT

    SciTech Connect

    Seitz, R.

    2011-03-02

    It is widely recognized that the results of safety assessment calculations provide an important contribution to the safety arguments for a disposal facility, but cannot in themselves adequately demonstrate the safety of the disposal system. The safety assessment and a broader range of arguments and activities need to be considered holistically to justify radioactive waste disposal at any particular site. Many programs are therefore moving towards the production of what has become known as a Safety Case, which includes all of the different activities that are conducted to demonstrate the safety of a disposal concept. Recognizing the growing interest in the concept of a Safety Case, the International Atomic Energy Agency (IAEA) is undertaking an intercomparison and harmonization project called PRISM (Practical Illustration and use of the Safety Case Concept in the Management of Near-surface Disposal). The PRISM project is organized into four Task Groups that address key aspects of the Safety Case concept: Task Group 1 - Understanding the Safety Case; Task Group 2 - Disposal facility design; Task Group 3 - Managing waste acceptance; and Task Group 4 - Managing uncertainty. This paper addresses the work of Task Group 4, which is investigating approaches for managing the uncertainties associated with near-surface disposal of radioactive waste and their consideration in the context of the Safety Case. Emphasis is placed on identifying a wide variety of approaches that can and have been used to manage different types of uncertainties, especially non-quantitative approaches that have not received as much attention in previous IAEA projects. This paper includes discussions of the current results of work on the task on managing uncertainty, including: the different circumstances being considered, the sources/types of uncertainties being addressed and some initial proposals for approaches that can be used to manage different types of uncertainties.

  15. Revised delta34S reference values for IAEA sulfur isotope reference materials S-2 and S-3.

    PubMed

    Mann, Jacqueline L; Vocke, Robert D; Kelly, W Robert

    2009-04-01

    Revised delta(34)S reference values with associated expanded uncertainties (95% confidence interval (C.I.)) are presented for the sulfur isotope reference materials IAEA-S-2 (22.62 +/- 0.16 per thousand) and IAEA-S-3 (-32.49 +/- 0.16 per thousand). These revised values are determined using two relative-difference measurement techniques, gas source isotope ratio mass spectrometry (GIRMS) and double-spike multi-collector thermal ionization mass spectrometry (MC-TIMS). Gas analyses have traditionally been considered the most robust for relative isotopic difference measurements of sulfur. The double-spike MC-TIMS technique provides an independent method for value-assignment validation and produces revised values that are both unbiased and more precise than previous value assignments. Unbiased delta(34)S values are required to anchor the positive and negative end members of the sulfur delta (delta) scale because they are the basis for reporting both delta(34)S values and the derived mass-independent Delta(33)S and Delta(36)S values.

  16. Analytical quality of environmental analysis: Recent results and future trends of the IAEA-ILMR's Analytical Quality Control Program

    SciTech Connect

    Ballestra, S.; Vas, D.; Holm, E.; Lopez, J.J.; Parsi, P. )

    1988-01-01

    The Analytical Quality Control Services Program of the IAEA-ILMR covers a wide variety of intercalibration and reference materials. The purpose of the program is to ensure the comparability of the results obtained by the different participants and to enable laboratories engaged in low-level analyses of marine environmental materials to control their analytical performance. Within the past five years, the International Laboratory of Marine Radioactivity in Monaco has organized eight intercomparison exercises, on a world-wide basis, on natural materials of marine origin comprising sea water, sediment, seaweed and fish flesh. Results on artificial (fission and activation products, transuranium elements) and natural radionuclides were compiled and evaluated. Reference concentration values were established for a number of the intercalibration samples allowing them to become certified as reference materials available for general distribution. The results of the fish flesh sample and those of the deep-sea sediment are reviewed. The present status of three on-going intercomparison exercises on post-Chernobyl samples IAEA-306 (Baltic Sea sediment), IAEA-307 (Mediterranean sea-plant Posidonia oceanica) and IAEA-308 (Mediterranean mixed seaweed) is also described. 1 refs., 4 tabs.

  17. Technical Report

    SciTech Connect

    ,; ,; ,

    2012-02-01

    The 2011 World Materials Summit, held on 10/9-12/2011 in Washington DC, provided a forum for top decision makers and energy experts from aropund the world to focus on the materials research needs for the growing energy economy. Organized jointly by the Materials Research Society (MRS), the European MRS (E-MRS), and the Chinese MRS (C-MRS), the goal of the Summit was to explore how the different regions of the world can work together on the critical issue of clean energy, including its relation to environmental sustainability and water. The participants considered the area of materials research as well as advocacy, economics, outreach, and education. Realizing that the concerns are long-term and that young players will ultimately be the ones who are going to need to solve the energy challenges, the chairs of the Summit inaugurated a Student Congress, a program for graduate students and postdoctoral scholars in fields directly related to energy and environmental science, engineering, and/or policy. The top 45 candidates coming from 18 countries were selected on a competititve basis to participate in the Student Congress. The four-day effort culminated in a 2011 Worlds Materials Summit Declaration delineating materials directions related to global access to clean energy and water in a sustainable way.

  18. Numerical modeling of the radionuclide water pathway with HYDRUS and comparison with the IAEA model of SR 44.

    PubMed

    Merk, Rainer

    2012-02-01

    This study depicts a theoretical experiment in which the radionuclide transport through the porous material of a landfill consisting of concrete rubble (e.g., from the decommissioning of nuclear power plants) and the subsequent migration through the vadose zone and aquifer to a model well is calculated by means of the software HYDRUS-1D (Simunek et al., 2008). The radionuclides originally contained within the rubble become dissolved due to leaching caused by infiltrated rainwater. The resulting well-water contamination (in Bq/L) is calculated numerically as a function of time and location and compared with the outcome of a simplified analytic model for the groundwater pathway published by the IAEA (2005). Identical model parameters are considered. The main objective of the present work is to evaluate the predictive capacity of the more simple IAEA model using HYDRUS-1D as a reference. For most of the radionuclides considered (e.g., ¹²⁹I, and ²³⁹Pu), results from applying the IAEA model were found to be comparable to results from the more elaborate HYDRUS modeling, provided the underlying parameter values are comparable. However, the IAEA model appears to underestimate the effects resulting from, for example, high nuclide mobility, short half-life, or short-term variations in the water infiltration. The present results indicate that the IAEA model is suited for screening calculations and general recommendation purposes. However, the analysis of a specific site should be accompanied by detailed HYDRUS computer simulations. In all models considered, the calculation outcome largely depends on the choice of the sorption parameter K(d). PMID:22230022

  19. Numerical modeling of the radionuclide water pathway with HYDRUS and comparison with the IAEA model of SR 44.

    PubMed

    Merk, Rainer

    2012-02-01

    This study depicts a theoretical experiment in which the radionuclide transport through the porous material of a landfill consisting of concrete rubble (e.g., from the decommissioning of nuclear power plants) and the subsequent migration through the vadose zone and aquifer to a model well is calculated by means of the software HYDRUS-1D (Simunek et al., 2008). The radionuclides originally contained within the rubble become dissolved due to leaching caused by infiltrated rainwater. The resulting well-water contamination (in Bq/L) is calculated numerically as a function of time and location and compared with the outcome of a simplified analytic model for the groundwater pathway published by the IAEA (2005). Identical model parameters are considered. The main objective of the present work is to evaluate the predictive capacity of the more simple IAEA model using HYDRUS-1D as a reference. For most of the radionuclides considered (e.g., ¹²⁹I, and ²³⁹Pu), results from applying the IAEA model were found to be comparable to results from the more elaborate HYDRUS modeling, provided the underlying parameter values are comparable. However, the IAEA model appears to underestimate the effects resulting from, for example, high nuclide mobility, short half-life, or short-term variations in the water infiltration. The present results indicate that the IAEA model is suited for screening calculations and general recommendation purposes. However, the analysis of a specific site should be accompanied by detailed HYDRUS computer simulations. In all models considered, the calculation outcome largely depends on the choice of the sorption parameter K(d).

  20. Technical Editor Looks at Technical Writing.

    ERIC Educational Resources Information Center

    Smith, Howard (Bud)

    1982-01-01

    The author explores problems in technical writing, the editor's role, and the author-editor relationship. He presents a list of basic writing rules to help the technical writer achieve success. These involve subject matter, deadlines, purpose, topic sentences, arrangement, clarity, idea development, examples, vocabulary, reading level, and…

  1. Papers arising from IAEA Coordinated Research Project "Utilization of ion accelerators for studying and modelling of radiation induced defects in semiconductors and insulators" (F11016)

    NASA Astrophysics Data System (ADS)

    Vittone, Ettore; Breese, Mark; Simon, Aliz

    2016-04-01

    Within the International Atomic Energy Agency (IAEA) Department of Nuclear Sciences and Applications, activities are carried out to assist and advise IAEA Member States in assessing their needs for capacity building, research and development in nuclear sciences. Support is also provided to Member States' activities geared towards deriving benefits in fields such as (i) advanced materials for nuclear applications, (ii) application of accelerators and associated instrumentation, and (iii) nuclear, atomic and molecular data. One of the means that the IAEA uses to deliver its programme is Coordinated Research Projects (CRPs) which are very effective in stimulating international research and scientific interaction among the Member States.

  2. Technical report writing

    NASA Technical Reports Server (NTRS)

    Vidoli, Carol A.

    1992-01-01

    This manual covers the fundamentals of organizing, writing, and reviewing NASA technical reports. It was written to improve the writing skills of LeRC technical authors and the overall quality of their reports.

  3. Strengthened IAEA Safeguards-Imagery Analysis: Geospatial Tools for Nonproliferation Analysis

    SciTech Connect

    Pabian, Frank V

    2012-08-14

    This slide presentation focuses on the growing role and importance of imagery analysis for IAEA safeguards applications and how commercial satellite imagery, together with the newly available geospatial tools, can be used to promote 'all-source synergy.' As additional sources of openly available information, satellite imagery in conjunction with the geospatial tools can be used to significantly augment and enhance existing information gathering techniques, procedures, and analyses in the remote detection and assessment of nonproliferation relevant activities, facilities, and programs. Foremost of the geospatial tools are the 'Digital Virtual Globes' (i.e., GoogleEarth, Virtual Earth, etc.) that are far better than previously used simple 2-D plan-view line drawings for visualization of known and suspected facilities of interest which can be critical to: (1) Site familiarization and true geospatial context awareness; (2) Pre-inspection planning; (3) Onsite orientation and navigation; (4) Post-inspection reporting; (5) Site monitoring over time for changes; (6) Verification of states site declarations and for input to State Evaluation reports; and (7) A common basis for discussions among all interested parties (Member States). Additionally, as an 'open-source', such virtual globes can also provide a new, essentially free, means to conduct broad area search for undeclared nuclear sites and activities - either alleged through open source leads; identified on internet BLOGS and WIKI Layers, with input from a 'free' cadre of global browsers and/or by knowledgeable local citizens (a.k.a.: 'crowdsourcing'), that can include ground photos and maps; or by other initiatives based on existing information and in-house country knowledge. They also provide a means to acquire ground photography taken by locals, hobbyists, and tourists of the surrounding locales that can be useful in identifying and discriminating between relevant and non-relevant facilities and their associated

  4. The Oak Ridge Technical Information Center: A trailblazer in federal documentation

    SciTech Connect

    Vaden, W.M.

    1992-01-01

    This softbound book attempts to record the history of US AEC's Technical Information Center, from its conception (1947) to 1977. This organization centralizes and manages the issues related to control and dissemination of technical information, to fulfill the provisions of the Atomic Energy Act of 1946. TIC tried to search out and install efficient and economical systems for servicing the various technical information programs. It coordinated a direct organization-to-organization information exchange program, and it also participated in official bilateral exchange programs and in developing information systems for IAEA and Euratom. The work, planning, and strategies employed to achieve goals are chronicled in this book, whose 18 chapters are arranged into four sections according to different presidential administrations.

  5. The Oak Ridge Technical Information Center: A trailblazer in federal documentation

    SciTech Connect

    Vaden, W.M.

    1992-01-01

    This document attempts to record the history of US AEC`s Technical Information Center, from its conception (1947) to 1977. This organization centralizes and manages the issues related to control and dissemination of technical information, to fulfill the provisions of the Atomic Energy Act of 1946. TIC tried to search out and install efficient and economical systems for servicing the various technical information programs. It coordinated a direct organization-to-organization information exchange program, and it also participated in official bilateral exchange programs and in developing information systems for IAEA and Euratom. The work, planning, and strategies employed to achieve goals are chronicled in this document, with 18 chapters arranged into four sections according to different presidential administrations.

  6. SUPPLEMENTARY COMPARISON Technically enhanced naturally occurring radionuclides (TENORM) in phosphogypsum: Comparison CCRI(II)-S5

    NASA Astrophysics Data System (ADS)

    Shakhashiro, A.; Sansone, U.; Wershofen, H.; Bollhöfer, A.; Kim, C. K.; Kim, C. S.; Korun, M.; Moune, M.; Lee, S. H.; Tarjan, S.

    2010-01-01

    Within the frame of mutual cooperation between the IAEA and the BIPM, the Consultative Committee for Ionizing Radiation Section II—Measurement of Radionuclides accepted an IAEA-organized interlaboratory comparison in 2008 on the determination of technically enhanced naturally occurring radionuclides in phosphogypsum. The study was piloted by the Chemistry Unit at the IAEA's Laboratories in Seibersdorf (Austria). This report presents the methodology applied in conducting this comparison and the results. Activity results for Pb-210, Ra-226, Th-230, U-234, U-235 and U-238 were reported by three national metrology institutes (NMI) and five other expert laboratories or designated institutes. Four different approaches were used to calculate the nominal value of the reported results and associated uncertainties, and the results from each individual participant were evaluated and compared with this nominal reference value. The reported evaluation of the measurement results demonstrated agreement amongst the participating laboratories. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI Section II, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

  7. Market Research Survey of Commercial Off-The-Shelf (COTS) Portable MS Systems for IAEA Safeguards Applications

    SciTech Connect

    Hart, Garret L.; Hager, George J.; Barinaga, Charles J.; Duckworth, Douglas C.

    2013-02-01

    This report summarizes the results for the market research survey of mass spectrometers that are deemed pertinent to International Atomic Energy Agency (IAEA) needs and strategic objectives. The focus of the report is on MS instruments that represent currently available (or soon to be) commercial off-the shelf (COTS) technology and weigh less than 400 pounds. A compilation of all available MS instruments (36 COTS and 2 R&D) is presented, along with pertinent information regarding each instrument.

  8. Case Studies on Technical and Vocational Education in Asia and the Pacific. Report of Regional Meeting (Kuala Lumpur, Malaysia, December 12-15, 1994). Exemplar Curriculum Project Working Group Report.

    ERIC Educational Resources Information Center

    Haas, Adrian, Ed.

    This conference report provides summaries of presentations of country case studies from a project to investigate factors that impinged upon the status of technical and vocational education (TVE) in Asian and Pacific countries. The report includes the case study project terms of reference, a list of delegates, and agenda. Summaries follow of the…

  9. Some lessons of the IAEA's nuclear non-proliferation regime for confidence-building under a greenhouse gas convention

    SciTech Connect

    Feldman, D.L. Tennessee Univ., Knoxville, TN . Energy, Environment and Resources Center)

    1991-01-01

    The IAEA's nuclear non-proliferation regime provides valuable insights into how to enhance the process of negotiations among participants to a greenhouse gas (GHG) convention. IAEA employs an iterative approach to verification that accepts the need for long, arduous negotiations to explore all possible routes to agreement, replicates carefully formulated agreements in more specialized contexts, incorporates scientific and advocacy groups to ensure adaptability to changing economic/political conditions, and uses confidence-building measures that rely on quiet diplomacy and rigorous compliance criteria. Insights from IAEA's nuclear non-proliferation regime for a GHG convention include the need to ensure equality among signatories, provide inclusive participation, place verification activities in small, politically-neutral bodies to resolve anomalies, provide sufficient infrastructure to recruit and train those charged with independent auditing, ensure budgetary independence and non-governmental/intergovernmental organization support, and recognize that successful agreements with detailed rules and regulations generally result from a hierarchical process of negotiations. Signatories to a GHG convention might engage in a symbolic commitment to an international inspection/auditing body with benefits to international education and enhancing awareness of the impact of GHGs. 36 refs.

  10. Implementation of neutron counting techniques at US facilities for IAEA verification of excess materials from nuclear weapons production

    SciTech Connect

    Stewart, J.E.; Krick, M.S.; Langner, D.G.; Reilly, T.D.; Theis, W.; Lemaire, R.J.; Xiao, J.

    1995-08-01

    The U.S. Nonproliferation and Export Control Policy, announced by President Clinton before the United Nations General Assembly on September 27, 1993, commits the U.S. to placing under International Atomic Energy Agency (IAEA) Safeguards excess nuclear materials no longer needed for the U.S. nuclear deterrent. As of July 1, 1995, the IAEA had completed Initial Physical Inventory Verification (IPIV) at two facilities: a storage vault in the Oak Ridge Y-12 plant containing highly enriched uranium (HOW) metal and another storage vault in the Hanford Plutonium Finishing Plant (PFP) containing plutonium oxide and plutonium-bearing residues. Another plutonium- storage vault, located at Rocky Flats, is scheduled for the IPIV in the fall of 1995. Conventional neutron coincidence counting is one of the routinely applied IAEA nondestructive assay (ND) methods for verification of uranium and plutonium. However, at all three facilities mentioned above, neutron ND equipment had to be modified or developed for specific facility needs such as the type and configuration of material placed under safeguards. This document describes those modifications and developments.

  11. A study of a zone approach to IAEA (International Atomic Energy Agency) safeguards: The low-enriched-uranium zone of a light-water-reactor fuel cycle

    SciTech Connect

    Fishbone, L.G.; Higinbotham, W.A.

    1986-06-01

    At present the IAEA designs its safeguards approach with regard to each type of nuclear facility so that the safeguards activities and effort are essentially the same for a given type and size of nuclear facility wherever it may be located. Conclusions regarding a state are derived by combining the conclusions regarding the effectiveness of safeguards for the individual facilities within a state. In this study it was convenient to define three zones in a state with a closed light-water-reactor nuclear fuel cycle. Each zone contains those facilities or parts thereof which use or process nuclear materials of the same safeguards significance: low-enriched uranium, radioactive spent fuel, or recovered plutonium. The possibility that each zone might be treated as an extended material balance area for safeguards purposes is under investigation. The approach includes defining the relevant features of the facilities in the three zones and listing the safeguards activities which are now practiced. This study has focussed on the fresh-fuel zone, the several facilities of which use or process low-enriched uranium. At one extreme, flows and inventories would be verified at each material balance area. At the other extreme, the flows into and out of the zone and the inventory of the whole zone would be verified. There are a number of possible safeguards approaches which fall between the two extremes. The intention is to develop a rational approach which will make it possible to compare the technical effectiveness and the inspection effort for the facility-oriented approach, for the approach involving the zone as a material balance area, and for some reasonable intermediate safeguards approaches.

  12. Fuel Cycle Analysis Framework Base Cases for the IAEA/INPRO GAINS Collaborative Project

    SciTech Connect

    Brent Dixon

    2012-09-01

    Thirteen countries participated in the Collaborative Project GAINS “Global Architecture of Innovative Nuclear Energy Systems Based on Thermal and Fast Reactors Including a Closed Fuel Cycle”, which was the primary activity within the IAEA/INPRO Program Area B: “Global Vision on Sustainable Nuclear Energy” for the last three years. The overall objective of GAINS was to develop a standard framework for assessing future nuclear energy systems taking into account sustainable development, and to validate results through sample analyses. This paper details the eight scenarios that constitute the GAINS framework base cases for analysis of the transition to future innovative nuclear energy systems. The framework base cases provide a reference for users of the framework to start from in developing and assessing their own alternate systems. Each base case is described along with performance results against the GAINS sustainability evaluation metrics. The eight cases include four using a moderate growth projection and four using a high growth projection for global nuclear electricity generation through 2100. The cases are divided into two sets, addressing homogeneous and heterogeneous scenarios developed by GAINS to model global fuel cycle strategies. The heterogeneous world scenario considers three separate nuclear groups based on their fuel cycle strategies, with non-synergistic and synergistic cases. The framework base case analyses results show the impact of these different fuel cycle strategies while providing references for future users of the GAINS framework. A large number of scenario alterations are possible and can be used to assess different strategies, different technologies, and different assumptions about possible futures of nuclear power. Results can be compared to the framework base cases to assess where these alternate cases perform differently versus the sustainability indicators.

  13. Development of regional network for nuclear information in Latin America

    NASA Astrophysics Data System (ADS)

    Ebinuma, Yukio

    Among the recent INIS activities several interesting items are reported. In particular Latin America area where active movements have been seen recently is described in detail in terms of INIS information services. The author reports Latin America regional nuclear information project which has been implemented as 5-year project since 1985 supported by IAEA, and its progress, and describes information service system in Brazil which plays the core role in promoting this project.

  14. 2011 PERFORMANCE ASSESSMENT COMMUNITY OF PRACTICE TECHNICAL EXCHANGE - SUMMARY

    SciTech Connect

    Seitz, R.

    2011-12-30

    The Performance Assessment Community of Practice (PA CoP) was developed in 2008 to improve consistency and quality in the preparation of performance assessments (PAs) and risk assessments across the Department of Energy (DOE) Complex. The term, PA, is used to represent all of these modeling applications in this report. The PA CoP goals are to foster the exchange of information among PA practitioners and to share lessons learned from PAs conducted for DOE, commercial disposal facilities, and international entities. Technical exchanges and workshops are a cornerstone of PA CoP activities. Previous technical exchanges have addressed Engineered Barriers (2009 - http://www.cresp.org/education/workshops/pacop/), the Advanced Simulation Capability for Environmental Management and the Cementitious Barriers Partnership (2010 - http://srnl.doe.gov/copexchange/links.htm). Each technical exchange also includes summary presentations regarding activities at DOE, the Nuclear Regulatory Commission (NRC) and other organizations (e.g., International Atomic Energy Agency (IAEA)) as well as a number of presentations from selected sites to provide insight and perspective from on-going modeling activities. Through the deployment of PA Assistance Teams, the PA CoP has also been engaged in the development of new PAs across the DOE Complex. As a way of improving consistency in the preparation of new PAs, the teams provide technical advice and share experiences, noteworthy practices, and lessons learned from previous Low-Level Waste Disposal Facility Federal Review Group (LFRG) reviews. Teams have provided support for PAs at Hanford, Idaho, Paducah and Portsmouth. The third annual PA CoP Technical Exchange was held on May 25-26, 2011 in Atlanta, GA. The PA CoP Steering Committee Meeting held its first meeting on May 24 prior to the Technical Exchange. Decision making using models and software quality assurance were the topical emphasis for the exchange. A new feature at the 2011 technical

  15. Toward a Technical Humanism

    ERIC Educational Resources Information Center

    Malassis, Louis

    1977-01-01

    Examines the relationship between education and development in developing nations. Advocates the fostering of a technical humanism--the development of knowledge in all its forms as a basis for action. In this system, technical education is as highly valued as general education. The system, and its applications to rural education is discussed. (CP)

  16. Technical Training for Managers.

    ERIC Educational Resources Information Center

    Haverland, Edgar M.

    The question has arisen as to what kind of information a manager without extensive technical training needs to learn to supervise effectively. For example, the Nike Hercules fire control platoon leader, usually an officer in his first active duty assignment, seldom has had extensive technical training. Yet he is responsibile for the…

  17. Technical Manual. The ACT®

    ERIC Educational Resources Information Center

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  18. Technical and Vocational Training.

    ERIC Educational Resources Information Center

    Vocational Training, 1993

    1993-01-01

    This issue focuses on the various forms that secondary technical and vocational education takes in different European Community Member States. "The Future for Skilled Workers" is an interview with Burkart Lutz, a German researcher. Other articles are as follows: "Contradictions in Technical and Vocational Education: The Outlook" (Paolo Garonna);…

  19. Focus on Technical Writing.

    ERIC Educational Resources Information Center

    Sewell, Ernestine P., Ed.

    1980-01-01

    Noting that technical writing is becoming an increasingly important element in the college curriculum, this journal issue presents eight articles that provide information for use by technical writing instructors. The first article surveys resources and strategies currently available, while the second article reflects upon some of the adjustments…

  20. Three Technical Word Processors.

    ERIC Educational Resources Information Center

    Cudeck, Robert; McGuire, Dennis P.

    1987-01-01

    Three technical word processing systems for microcomputers are reviewed. Tech/Print, a basic addition to Word Star, is easy to use and adequate for simple or low volume mathematics. Math Text is very good, but not well suited for heavy text processing. T3, the most expensive, is excellent for both standard and technical text. (JAZ)

  1. Research in Technical Colleges

    ERIC Educational Resources Information Center

    MacLennan, A.

    2008-01-01

    Purpose: The purpose of this paper is to list and demonstrate areas in which research needs to be carried out, or questions answered, in order to raise the quality of technical education. Design/methodology/approach: The area of technical education expanded very rapidly in the late 1950s, and there was little comprehensive knowledge regarding the…

  2. Developing Technical Skill Assessments

    ERIC Educational Resources Information Center

    Hyslop, Alisha

    2009-01-01

    One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

  3. Scientific and Technical English.

    ERIC Educational Resources Information Center

    Vaclavik, Jaroslav

    Technical English differs from everyday English because of the specialized contexts in which it is used and because of the specialized interests of scientists and engineers. This text provides exercises in technical and scientific exposition in the following fields: mathematics, physics, temperature effects, mechanics, dynamics, conservation of…

  4. Technical Mathematics: Restructure of Technical Mathematics.

    ERIC Educational Resources Information Center

    Flannery, Carol A.

    Designed to accompany a series of videotapes, this textbook provides information, examples, problems, and solutions relating to mathematics and its applications in technical fields. Chapter I deals with basic arithmetic, providing information on fractions, decimals, ratios, proportions, percentages, and order of operations. Chapter II focuses on…

  5. Making an Impact in the Kurdistan Region--Iraq. Summary of Four Studies to Assess the Present and Future Labor Market, Improve Technical Vocational Education and Training, Reform the Health Sector, and Build Data Collection Capacity. Research Report

    ERIC Educational Resources Information Center

    Anthony, C. Ross; Constant, Louay; Culbertson, Shelby; Click, Peter; Kumar, Krishna B.; Meili, Robin C.; Moore, Melinda; Shatz, Howard J.; Vernez, Georges

    2015-01-01

    This executive summary describes key results from four studies carried out by the RAND Corporation as part of Phase II of its work for the Kurdistan Regional Government (KRG). The KRG asked RAND to undertake several studies aimed at improving the economic and social development of the Kurdistan Region--Iraq (KRI). RAND's work is intended to help…

  6. General technical requirements (GTR) for inventory monitoring systems (IMS) for the trilateral initiative

    SciTech Connect

    Pshakin, Gennady M.; Kuleshov, I.; Shea, T.; Puckett, J. M.; Zhukov, I.; Mangan, Dennis L.; Matter, John C.; Waddoups, I.; Smathers, D.; Abhold, M. E.; Hsue, S.-T.; Chiaro, P.

    2002-01-01

    Pursuant to the Trilateral Initiative, the three parties (The Russian Federation, the United States, and the International Atomic Energy Agency) have been engaged in discussions concerning the structure of reliable monitoring systems for storage facilities having large inventories. The intent of these monitoring systems is to provide the capability for the IAEA to maintain continuity of knowledge in a sufficiently reliable manner that should there be equipment failure, loss of continuity of knowledge would be restricted to a small population of the inventory, and thus reinventory of the stored items would be minimized These facility-specific monitoring systems, referred to as Inventory Monitoring Systems (IMS) are to provide the principal means for the M A to assure that the containers of fissile material remain accounted under the Verification Agreements which are to be concluded between the IAEA and the Russian Federation and the lAEA and the United States for the verification of weapon-origin and other fissile material specified by each State as released from its defense programs. A technical experts working group for inventory monitoring systems has been meeting since Feb- of 2000 to formulate General Technical Requirements (GTR) for Inventory Monitoring Systems for the Trilateral Initiative. Although provisional agreement has been reached by the three parties concerning the GTR, it is considered a living document that can be updated as warranted by the three parties. This paper provides a summary of the GTR as it currently exists.

  7. Results for Phase I of the IAEA Coordinated Research Program on HTGR Uncertainties

    SciTech Connect

    Strydom, Gerhard; Bostelmann, Friederike; Yoon, Su Jong

    2015-01-01

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied. High Temperature Gas-cooled Reactors (HTGR) has its own peculiarities, coated particle design, large graphite quantities, different materials and high temperatures that also require other simulation requirements. The IAEA has therefore launched a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modeling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the HTR-PM (INET, China). This report summarizes the contributions of the HTGR Methods Simulation group at Idaho National Laboratory (INL) up to this point of the CRP. The activities at INL have been focused so far on creating the problem specifications for the prismatic design, as well as providing reference solutions for the exercises defined for Phase I. An overview is provided of the HTGR UAM objectives and scope, and the detailed specifications for Exercises I-1, I-2, I-3 and I-4 are also included here for completeness. The main focus of the report is the compilation and discussion of reference results for Phase I (i.e. for input parameters at their nominal or best-estimate values), which is defined as the first step of the uncertainty quantification process. These reference results can be used by other CRP participants for comparison with other codes or their own reference

  8. REGIONAL CONFERENCE SUMMARIES, 1966.

    ERIC Educational Resources Information Center

    Bureau of Adult, Vocational, and Technical Education (DHEW/OE), Washington, DC. Div. of Vocational and Technical Education.

    AN AVERAGE OF 200 TEACHER EDUCATORS, STATE DIRECTORS, LAYMEN, AND REPRESENTATIVES OF VARIOUS AGENCIES ATTENDED EACH OF NINE REGIONAL CONFERENCES CONDUCTED THROUGHOUT THE UNITED STATES TO DISCUSS THE INFLUENCE OF SOCIAL AND ECONOMIC CHANGES AND PROBLEMS IN PLANNING AND CONDUCTING VOCATIONAL AND TECHNICAL EDUCATION PROGRAMS. MAJOR SPEECHES PRESENTED…

  9. 25th IAEA Fusion Energy Conference: summary of sessions EX/S, EX/W and ICC

    NASA Astrophysics Data System (ADS)

    Sen, A.

    2015-10-01

    This paper provides a summary overview, based on papers presented at the 25th IAEA Fusion Energy Conference (FEC), in the area of magnetic confinement experiments related to stability (EX/S), wave-plasma interactions, current drive, heating, energetic particles (EX/W) and innovative confinement concepts (ICCs). A selection of results that represent progress made since the last FEC in a few important thematic areas that are relevant for the successful and safe operation of future fusion devices like ITER, is highlighted.

  10. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-10-17

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November...

  11. Final Technical Report

    SciTech Connect

    Joseph Junker; Greg Wheeler

    2007-02-26

    Since 1986 the Oregon State University Industrial Assessment Center (OSU IAC) has worked to increase the energy efficiency, productivity, sustainability, and competitiveness of US manufacturers; provide engineering students an education not available in the classroom; keep engineering faculty in contact with technology and challenges in Northwest industry; and reduce dependence on nonrenewable energy resources, both imported and domestic. Project Objective: Over the duration of this project (2002-2006), the OSU IAC worked to directly support and influence industrial decisions primarily regarding energy but also regarding sustainability and profitability through: Assessments & Follow-up: The OSU IAC performed 111 Industrial Assessments in Oregon, Washington, Idaho and Nevada to help industry identify and implement opportunities to increase energy efficiency, productivity, sustainability, and competitiveness Workshops Seminars Forums Etc: OSU IAC staff worked with regional peers to offer appropriate workshops and trainings as opportunities availed themselves. Graduating Excellent Energy Aware Professional Alumni: As technically capable, skilled written and verbal communicators, our alumni contributed to OSU IAC influence from their positions within industry, consulting organizations, utilities, and governmental and non governmental agencies. Tool Development: Analysis tools and guides originated at the OSU IAC extended our reach. The center continually worked to develop computer based analysis tools, evaluation checklists, analysis guide sheets for internal use and general sharing with industry, energy, and other professionals to assist them in efforts to improve US Industry. Impact: Over 20 years of activity the OSU IAC has typically performed 25 Industrial Assessments a year. On average, each year of 25 assessments has resulted in implemented projects that saved industry a total of: 25.3 TBTU in annual energy and $4.5 Million annually, with an average investment

  12. OSH technical reference manual

    SciTech Connect

    Not Available

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  13. TADS and Technical Assistance.

    ERIC Educational Resources Information Center

    Trohanis, Pascal L.

    1983-01-01

    Accomplishments of the Technical Assistance Development System (TADS) are cited, current challenges (including program development, and communication and coordination) are noted, and the mission mandated for TADS is outlined. (CL)

  14. Technical Institute Stresses Flexibility

    ERIC Educational Resources Information Center

    Industrial Education, 1976

    1976-01-01

    At the Waukesha County Technical Institute in Wisconsin students benefit from individualized instruction and open entry/open exit system. The key to this flexibility is a series of audio-visual modules to support lecture presentations and demonstrations. (HD)

  15. The IAEA Coordinated Research Program on HTGR Uncertainty Analysis: Phase I Status and Initial Results

    SciTech Connect

    Strydom, Gerhard; Bostelmann, Friederike; Ivanov, Kostadin

    2014-10-01

    required confidence level. In order to address uncertainty propagation in analysis and methods in the HTGR community the IAEA initiated a Coordinated Research Project (CRP) on the HTGR Uncertainty Analysis in Modelling (UAM) that officially started in 2013. Although this project focuses specifically on the peculiarities of HTGR designs and its simulation requirements, many lessons can be learned from the LWR community and the significant progress already made towards a consistent methodology uncertainty analysis. In the case of LWRs the NRC has already in 1988 amended 10 CFR 50.46 to allow best-estimate (plus uncertainties) calculations of emergency core cooling system performance. The Nuclear Energy Agency (NEA) of the Organization for Economic Co-operation and Development (OECD) also established an Expert Group on "Uncertainty Analysis in Modelling" which finally led to the definition of the "Benchmark for Uncertainty Analysis in Modelling (UAM) for Design, Operation and Safety Analysis of LWRs". The CRP on HTGR UAM will follow as far as possible the on-going OECD Light Water Reactor UAM benchmark activity.

  16. 38 CFR 1.960 - Legal and technical assistance.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... GENERAL PROVISIONS Referrals to Gao, Department of Justice, Or Irs § 1.960 Legal and technical assistance... Regional Counsel on legal matters within his/her jurisdiction and from other division chiefs in their...

  17. NASA Technical Standards Program

    NASA Technical Reports Server (NTRS)

    Gill, Paul S.; Vaughan, WIlliam W.

    2003-01-01

    The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

  18. NASA Technical Standards Program

    NASA Technical Reports Server (NTRS)

    Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

    2002-01-01

    The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

  19. Progress on the development of new correlations under the framework of the IAEA Coordinated Research Programme on heat transfer in SCWR's

    SciTech Connect

    Jackson, J. D.; Anderson, M.; Cheng, X.; Zahlan, H.; Bae, Y. Y.; Yamada, K.

    2012-07-01

    This paper begins with an introduction designed to provide researchers who are new to field of heat transfer to fluids at supercritical pressure with a brief picture of early developments, and to set the scene for the review of work on the development of new correlations for such fluids under the framework of the IAEA CRP. These are needed because of the active consideration now being given to water-cooled nuclear reactors operating at pressures above the critical value. Work on the development of a trans-critical look-up table aimed at covering the region near the critical point is outlined. A very large heat transfer databank has been compiled and subjected to a thorough screening process. It covers a wide range of conditions and has been used for the assessment of the performance of a number of empirical equations. A detailed error analysis was carried out for the most promising ones and an examination of parametric trends was made. A new correlation is described which has been specifically designed to combine simplicity of structure, explicit connection with physically-based phenomena whilst being able to cover both normal and deteriorated heat transfer conditions. It avoids direct dependence of heat transfer coefficient on wall temperature. The performance of this correlation was evaluated using the data set of Herkenrath et al for water at supercritical pressure. Results from a recent experimental study of heat transfer to carbon dioxide at supercritical pressure under conditions of mixed convection have been used to develop a set of equations to describe the general behaviour observed. Comparisons are made between the performance of a number of equations and the data from the carbon dioxide experiments and also some for water. Finally, the development is outlined of physically-based, semi-empirical models aimed at extending an empirical equation for variable property forced convection heat transfer to fluids at supercritical pressure to account for

  20. Final Technical Report

    SciTech Connect

    Aristos Aristidou Natureworks); Robert Kean; Tom Schechinger; Stuart Birrell; Jill Euken

    2007-10-01

    The two main objectives of this project were: 1) to develop and test technologies to harvest, transport, store, and separate corn stover to supply a clean raw material to the bioproducts industry, and 2) engineer fermentation systems to meet performance targets for lactic acid and ethanol manufacturers. Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed, which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest

  1. 1980 Bibliography of Technical Writing.

    ERIC Educational Resources Information Center

    Book, Virginia Alm; And Others

    1981-01-01

    Offers resources on technical writing that were published in 1980. Arranges the citations under 12 categories: bibliographies, books, reviews, and articles on theory and philosophy; pedagogy; writing technical articles and reports; research; technical writing and the computer; graphic/visual aids; correspondence; technical speech; and designing…

  2. Technical Assistance to Developers

    SciTech Connect

    Rockward, Tommy; Borup, Rodney L.; Garzon, Fernando H.; Mukundan, Rangachary; Spernjak, Dusan

    2012-07-17

    This task supports the allowance of technical assistance to fuel-cell component and system developers as directed by the DOE. This task includes testing of novel materials and participation in the further development and validation of single cell test protocols. This task also covers technical assistance to DOE Working Groups, the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Driving Research and Innovation for Vehicle efficiency and Energy sustainability (U.S. Drive) Fuel Cell Technology Team. Assistance includes technical validation of new fuel cell materials and methods, single cell fuel cell testing to support the development of targets and test protocols, and regular advisory participation in other working groups and reviews. This assistance is made available to PEM fuel cell developers by request and DOE Approval. The objectives are to: (1) Support technically, as directed by DOE, fuel cell component and system developers; (2) Assess fuel cell materials and components and give feedback to developers; (3) Assist the DOE Durability Working Group with the development of various new material durability Testing protocols; and (4) Provide support to the U.S. Council for Automotive Research (USCAR) and the USCAR/DOE Fuel Cell Technology Team. FY2012 specific technical objectives are: (1) Evaluate novel MPL materials; (2) Develop of startup/ shutdown protocol; (3) Test the impact of hydrophobic treatment on graphite bi-polar plates; (4) Perform complete diagnostics on metal bi-polar plates for corrosion; and (5) Participate and lead efforts in the DOE Working Groups.

  3. The IAEA international conference on fast reactors and related fuel cycles: highlights and main outcomes

    SciTech Connect

    Monti, S.; Toti, A.

    2013-07-01

    The 'International Conference on Fast Reactors and Related Fuel Cycles', which is regularly held every four years, represents the main international event dealing with fast reactors technology and related fuel cycles options. Main topics of the conference were new fast reactor concepts, design and simulation capabilities, safety of fast reactors, fast reactor fuels and innovative fuel cycles, analysis of past experience, fast reactor knowledge management. Particular emphasis was put on safety aspects, considering the current need of developing and harmonizing safety standards for fast reactors at the international level, taking also into account the lessons learned from the accident occurred at the Fukushima- Daiichi nuclear power plant in March 2011. Main advances in the several key areas of technological development were presented through 208 oral presentations during 41 technical sessions which shows the importance taken by fast reactors in the future of nuclear energy.

  4. Development and validation of a model for tritium accumulation by a freshwater bivalve using the IAEA EMRAS scenarios

    SciTech Connect

    Miyamoto, K.; Inoue, Y.; Takeda, H.; Yanagisawa, K.; Fuma, S.; Ishii, N.; Kuroda, N.; Yankovich, T.; Kim, S. B.; Davis, P.

    2008-07-15

    A six-compartment metabolic model for tritium accumulation by bivalves was developed and validated using two observed data sets supplied in an international IAEA program for validation of environmental models, EMRAS (Environmental Modeling for Radiation Safety, 2003-2007). The data observed were presented in scenarios for model prediction of temporal change of HTO and OBT concentrations in Barnes mussels (Elliptio complanata). In the Uptake Scenario, mussels were transplanted from a site with background tritium concentrations into a lake, which has historically received tritium inputs over time from up-gradient waste management areas. Another data set was presented in the Depuration Scenario for model prediction of the temporal decrease in HTO and OBT concentrations in the mussels following transplantation from the lake into another lake with significantly lower tritium levels. The model simulation was able to reproduce the observation that the amount of hydrogen taken from sediment was very small compared with that taken from lake water. (authors)

  5. KSC Technical Capabilities Website

    NASA Technical Reports Server (NTRS)

    Nufer, Brian; Bursian, Henry; Brown, Laurette L.

    2010-01-01

    This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

  6. Considerations Related To Human Intrusion In The Context Of Disposal Of Radioactive Waste-The IAEA HIDRA Project

    SciTech Connect

    Seitz, Roger; Kumano, Yumiko; Bailey, Lucy; Markley, Chris; Andersson, Eva; Beuth, Thomas

    2014-01-09

    The principal approaches for management of radioactive waste are commonly termed ‘delay and decay’, ‘concentrate and contain’ and ‘dilute and disperse’. Containing the waste and isolating it from the human environment, by burying it, is considered to increase safety and is generally accepted as the preferred approach for managing radioactive waste. However, this approach results in concentrated sources of radioactive waste contained in one location, which can pose hazards should the facility be disrupted by human action in the future. The International Commission on Radiological Protection (ICRP), International Atomic Energy Agency (IAEA), and Organization for Economic Cooperation and Development/Nuclear Energy Agency (OECD/NEA) agree that some form of inadvertent human intrusion (HI) needs to be considered to address the potential consequences in the case of loss of institutional control and loss of memory of the disposal facility. Requirements are reflected in national regulations governing radioactive waste disposal. However, in practice, these requirements are often different from country to country, which is then reflected in the actual implementation of HI as part of a safety case. The IAEA project on HI in the context of Disposal of RadioActive waste (HIDRA) has been started to identify potential areas for improved consistency in consideration of HI. The expected outcome is to provide recommendations on how to address human actions in the safety case in the future, and how the safety case may be used to demonstrate robustness and optimize siting, design and waste acceptance criteria within the context of a safety case.

  7. Career Technical Education Instructors' Perceptions of Adult Students' Academic Ability in Career Technical Education Classes

    ERIC Educational Resources Information Center

    Helaire, Atlas, III

    2014-01-01

    The purpose of this qualitative survey study was to explore the student performance expectations, classroom management and instructional practices, and related professional experiences and specialized training of Career Technical Education (CTE) instructors at a Regional Occupational Center in Southern California in order to learn more about how…

  8. CATV Technical Papers.

    ERIC Educational Resources Information Center

    National Cable Television Association, Inc., Washington, DC.

    Complete technical papers of the 1977 National Cable Television Association Convention are included in this report. Twenty-two of 32 papers and two abstracts cover the topics of advanced cable television techniques, human reactions to television picture impairment, special displays and services, protection from theft of service, everyday…

  9. Materials Technical Team Roadmap

    SciTech Connect

    none,

    2013-08-01

    Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

  10. Education for Technical Services.

    ERIC Educational Resources Information Center

    Libbey, Maurice C., Ed.

    1985-01-01

    The 20 articles in this issue of Illinois Libraries were written by practicing technical services librarians, library educators, and former librarians now involved in commercial enterprise. The articles are: (1) "The Development of Library Education in Illinois" (Anne V. J. Wendler); (2) "Financial Management in Acquisitions: Things They Never…

  11. Teaching Technical Report Writing

    ERIC Educational Resources Information Center

    De Pasquale, Joseph A.

    1977-01-01

    A high school electronics teacher describes the integration of technical report writing in the electronics program for trade and industrial students. He notes that the report writing rather than just recording data seemed to improve student laboratory experience but further improvements in the program are needed. A sample lab report is included.…

  12. Assessing Technical Training Needs.

    ERIC Educational Resources Information Center

    Schwaller, Anthony E.; Slipy, Dave

    1985-01-01

    Describes the results of a joint project of St. Cloud State University (Minnesota) and DeZURIK Corporation (a manufacturer and distributor of industrial valves) which developed and implemented a technical training needs questionnaire for use with the company's employees. Student involvement in the process is noted. (MBR)

  13. Special technical assistance

    SciTech Connect

    Alexander, D.J.; Nanstad, R.K.; Sokolov, M.A.

    1995-10-01

    The purpose of this task is to perform various special analytical and experimental investigations to support the NRC in resolving regulatory research issues related to irradiation effects on materials. This task currently addresses two major areas: (1) providing technical expertise and assistance in the review of national codes and standards and (2) experimental evaluations of test specimens and practices and material properties.

  14. ICCS 2009 Technical Report

    ERIC Educational Resources Information Center

    Schulz, Wolfram, Ed.; Ainley, John, Ed.; Fraillon, Julian, Ed.

    2011-01-01

    This report is structured so as to provide technical detail about each aspect of International Civic and Citizenship Education Study (ICCS). The overview is followed by a series of chapters that provide detail about different aspects of ICCS. Chapters, 2, 3, 4, and 5 are concerned with the instruments. Chapter 2 provides information about the…

  15. PISA 2012 Technical Report

    ERIC Educational Resources Information Center

    OECD Publishing, 2014

    2014-01-01

    The "PISA 2012 Technical Report" describes the methodology underlying the PISA 2012 survey, which tested 15-year-olds' competencies in mathematics, reading and science and, in some countries, problem solving and financial literacy. It examines the design and implementation of the project at a level of detail that allows researchers to…

  16. PISA 2009 Technical Report

    ERIC Educational Resources Information Center

    OECD Publishing (NJ1), 2012

    2012-01-01

    The "PISA 2009 Technical Report" describes the methodology underlying the PISA 2009 survey. It examines additional features related to the implementation of the project at a level of detail that allows researchers to understand and replicate its analyses. The reader will find a wealth of information on the test and sample design, methodologies…

  17. Improved technical specifications

    SciTech Connect

    Hoffman, D.R.

    1994-12-31

    Improved technical specifications for nuclear power plants are outlined. The objectives of this work are to improve safety, provide a clearer understanding of safety significance, and ease NRC and industry administrative burdens. Line item improvements, bases, and implementation of the specifications are discussed.

  18. Teaching Technical Writing.

    ERIC Educational Resources Information Center

    Lummis, Jean

    2001-01-01

    Uses concept-based laboratory reports to incorporate technical writing into teaching. Features three paragraphs in the writing format: introductory paragraph, data paragraph, and conclusion. Recommends using this teaching method, especially in chemistry laboratories, because of the difficulties students have in understanding. (YDS)

  19. Technical Writing in Hydrogeology.

    ERIC Educational Resources Information Center

    Tinker, John R., Jr.

    1986-01-01

    A project for Writing Across the Curriculum at the University of Wisconsin-Eau Claire is described as a method to relate the process of writing to the process of learning hydrology. The project focuses on an actual groundwater contamination case and is designed to improve the technical writing skills of students. (JN)

  20. Technical Report Bibliography.

    ERIC Educational Resources Information Center

    Hoffnagle, Gale F.

    A Bibliography of all unclassified technical reports prepared by USAF Environmental Health Laboratory, McClellan is presented. It contains a listing by subject matter and a listing of all reports by year with report number and abstract. The reports cover most areas of environmental topics such as air, water, noise, and radiation pollution. (NTIS)

  1. Non-technical constraints to eradication: the Italian experience.

    PubMed

    Moda, Giuliana

    2006-02-25

    Although technical constraints to eradication of bovine tuberculosis are well-recognised, non-technical constraints can also delay progress towards eradication, leading to inefficiency and increased programme costs. This paper seeks to analyse the main non-technical constraints that can interfere with the successful implementation of tuberculosis eradication plans, based on experiences from an area of high tuberculosis prevalence in Regione Piemonte, Italy. The main social and economic constraints faced in the past 20 years are reviewed, including a social reluctance to recognise the importance of seeking eradication as the goal of disease control, effective communication of technical issues, the training and the organization of veterinary services, the relationship between the regional authority and farmers and their representatives, and data management and epidemiological reporting. The paper analyses and discusses the solutions that were applied in Regione Piemonte and the benefits that were obtained. Tuberculosis eradication plans are one of the most difficult tasks of the Veterinary Animal Health Services, and non-technical constraints must be considered when progress towards eradication is less than expected. Organizational and managerial resources can help to overcome social or economic obstacles, provided the veterinary profession is willing to address technical, but also non-technical, constraints to eradication.

  2. 78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-05-13

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9,...

  3. 77 FR 41184 - Coordination Between Natural Gas and Electricity Markets; Notice of Technical Conferences

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-07-12

    ... Energy Regulatory Commission Coordination Between Natural Gas and Electricity Markets; Notice of... regional technical conferences on Coordination between Natural Gas and Electricity Markets. The regional... jurisdiction over the rates or terms of service in wholesale electricity markets doing business wholly...

  4. Northeast Regional Biomass Program

    SciTech Connect

    Lusk, P.D.

    1992-12-01

    The Northeast Regional Biomass Program has been in operation for a period of nine years. During this time, state managed programs and technical programs have been conducted covering a wide range of activities primarily aim at the use and applications of wood as a fuel. These activities include: assessments of available biomass resources; surveys to determine what industries, businesses, institutions, and utility companies use wood and wood waste for fuel; and workshops, seminars, and demonstrations to provide technical assistance. In the Northeast, an estimated 6.2 million tons of wood are used in the commercial and industrial sector, where 12.5 million cords are used for residential heating annually. Of this useage, 1504.7 mw of power has been generated from biomass. The use of wood energy products has had substantial employment and income benefits in the region. Although wood and woodwaste have received primary emphasis in the regional program, the use of municipal solid waste has received increased emphasis as an energy source. The energy contribution of biomass will increase as potentia users become more familiar with existing feedstocks, technologies, and applications. The Northeast Regional Biomass Program is designed to support region-specific to overcome near-term barriers to biomass energy use.

  5. NASA Technical Standards Program Overview

    NASA Technical Reports Server (NTRS)

    Gill, Paul

    2005-01-01

    Contents include the following: Establish and maintain "NASA Preferred Technical Standard" as a common baseline for NASA programs. Support the use of technical standards on NASA program in the systems requirement process.

  6. Interpersonal Skills for Technical Writers.

    ERIC Educational Resources Information Center

    Fridie, Pamela

    1986-01-01

    Describes a summer internship as a faculty technical writer with a business corporation, revising installation manuals based upon information from computer programers--an experience that highlighted technical writers' need for interpersonal skills. (HTH)

  7. Microemulsions in technical processes

    SciTech Connect

    Schwuger, M.J.; Stickdorn, K.; Schomaecker, R.

    1995-06-01

    The aim of this review is to present once again the basic properties of microemulsions and to relate them to some already established applications and also to show further potential fields of application. This review will survey this area, focusing mainly on the last decade. Earlier publications on the technical relevance of microemulsions and reverse micelles were reviewed by Langevin in 1982. The most important properties of these systems, which are of significance for technical applications, will be described. The applications discussed are: enhanced oil recovery; liquid-liquid extraction; extraction from chemically contaminated soils; lubricants and cutting oils; pharmaceuticals and cosmetics; washing; impregnation and textile finishing; and chemical reactions in microemulsions. 143 refs.

  8. Final Technical Report

    SciTech Connect

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  9. Independent technical review, handbook

    SciTech Connect

    Not Available

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  10. Bioethics for Technical Experts

    NASA Astrophysics Data System (ADS)

    Asano, Shigetaka

    Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

  11. Advisory Technical Skills Committee Manual

    ERIC Educational Resources Information Center

    Barbee, Jim R.

    2005-01-01

    The use of advisory committees is well established in the public school system. The purpose of advisory committees is to provide leadership, guidance and technical assistance to maintain, improve and develop quality career and technical education programs. This manual is written for those planning to form new advisory technical skills committees,…

  12. Assessing Students' Technical Skill Attainment

    ERIC Educational Resources Information Center

    Jorgensen, Haley

    2010-01-01

    The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

  13. Final Technical Report

    SciTech Connect

    Klein, Stephen A.

    2005-10-27

    In this final technical report, a summary of work is provided. Work toward an improved representation of frontal clouds in global climate models occurred. This involved analysis of cloud variability in ARM observations and the careful contrast of single column model solutions with ARM data. In addition, high resolution simulations of frontal clouds were employed to diagnosis processes that are important for the development of frontal clouds.

  14. DENSO Technical Communication Education

    NASA Astrophysics Data System (ADS)

    Isogai, Emiko; Suzuki, Takamasa

    We developed technical communication education from beginning to managerial levels to enhance communication skills necessary for engineers. The courses in this program progressed from theory to hands-on training and discussion, providing an opportunity for fact-finding and problem-solving. After the courses were completed, the engineers applied what they had learned on the job. The courses proved to be useful, satisfying participating engineers.

  15. Technical approach document

    SciTech Connect

    Not Available

    1989-12-01

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  16. Total skin electron therapy (TSET): A reimplementation using radiochromic films and IAEA TRS-398 code of practice

    SciTech Connect

    Schiapparelli, P.; Zefiro, D.; Massone, F.; Taccini, G.

    2010-07-15

    Purpose: The aim of this work is to present an updated implementation of total skin electron therapy (TSET) using IAEA TRS-398 code of practice for absolute dosimetry and taking advantage of the use of radiochromic films. The optimization of quality control tests is also included. Methods: A Varian 2100 C/D linear accelerator equipped with the special procedure HDTSe{sup -} (high dose rate total skin electron mode, E=6 MeV) was employed to perform TSET irradiations using the modified Stanford technique. The commissioning was performed following the AAPM report 23 recommendations. In particular, for dual-field beams irradiation, the optimal tilt angle was investigated and the dose distribution in the treatment plane was measured. For a complete six dual-field beams irradiation, the treatment skin dose on the surface of a cylindrical phantom was evaluated by radiochromic films and the B factor which relates the single dual-field skin dose to the six dual-field skin dose was assessed. Since the TRS-398 reference conditions do not meet the requirements of TSET absolute dosimetry, GafChromic EBT films were also employed to check and validate the application of the protocol. Simplified procedures were studied to verify beam constancy in PMMA phantoms without the more difficult setup of total skin irradiation. Results: The optimized geometrical setup for dual-field beams was: Tilt angle={+-}19 deg., SSD=353 cm, and the beam degrader (200x100x1 cm{sup 3}) placed at 320 cm from the source. As regards to dose homogeneity in the treatment plane, for dual-field beams irradiation, the mean relative dose value was 97%{+-}5% (normalizing to 100% at the calibration point level). For six dual-field beams irradiation, the multiplication factor B was 2.63. In addition, beam quality, dose rate, and bremsstrahlung contribution were also suitable for TSET treatments. The TRS-398 code of practice was used for TSET dosimetry, as dose measurements performed by ionization chamber and

  17. Technical Writing: Past, Present and Future

    NASA Technical Reports Server (NTRS)

    Mathes, J. C. (Compiler); Pinelli, T. E. (Compiler)

    1981-01-01

    The training of technical writers and the objectives of such education are discussed. Special emphasis was placed on the communication between technical personnel and non-technical personnel. The liabilities that affect technical writers were also discussed.

  18. Cybernetica Qualified: Technical vs. Creative Writing.

    ERIC Educational Resources Information Center

    Meis, Ben H.

    1984-01-01

    Discusses the similarities and differences between the kind of writing that is commonly taught in English courses (composition, creative writing) and that taught in technical education classes (technical report writing, technical communications); and between creative and technical writers. (DMM)

  19. Participation in IAEA-TEL-201304/28 ALMERA Proficiency Test Exercise on Determination of Anthropogenic Radionuclides in Water and Flour Samples.

    PubMed

    Visetpotjanakit, S; Kaewpaluek, S; Udomsomporn, S

    2016-03-01

    The Office of Atoms for Peace (OAP) participated in the IAEA-TEL-201304/28 ALMERA Proficiency Test Exercise, "Determination of Anthropogenic Radionuclides in Water and Flour Samples," organized by the ALMERA network. There were three test samples sent together with one known activity sample for quality control purpose. Two of the test samples were spiked water: one contained (134)Cs and (137)Cs and the other contained (90)Sr, (60)Co, (152)Eu and (241)Am. The third sample was wheat flour spiked with (134)Cs and (137)Cs. OAP submitted all results to IAEA after determining (134)Cs, (137)Cs, (60)Co, (152)Eu and (241)Am activities by direct gamma-ray counting and (90)Sr by chemical separation and Cerenkov measurement. Our results with critical comments and statistical analysis are described in this paper. PMID:26688353

  20. Treatment of Irradiated Graphite to meet Acceptance Criteria for Waste Disposal: A New IAEA Collaborative Research Program - 12443

    SciTech Connect

    Wickham, A.J.; Drace, Z.

    2012-07-01

    World-wide, more than 250,000 tonnes of irradiated graphite have arisen through commercial nuclear-power operations and from military production reactors. Whilst most nations responsible for the generation of this material have in mind repository disposal alongside other radwaste, the lack of progress in this regard has led in some cases to difficulties where, for example, the site of an existing graphite-moderated reactor is required for re-utilisation. In any case, graphite as a radwaste stream has unique chemical and physical properties which may lend itself to more radical and innovative treatment and disposal options, including the recovery of useful isotopes and also recycling within the nuclear industry. Such aspects are important in making the case for future graphite-moderated reactor options (for example, High-Temperature Reactors planned for simultaneous power production and high-grade heat sources for such applications as hydrogen production for road fuel). A number of initiatives have taken place since the mid 1990s aimed at exploring such alternative strategies and, more recently, improving technology offers new options at all stages of the dismantling and disposal process. A new IAEA Collaborative Research Program aims to build upon the work already done and the knowledge achieved, in order to identify the risks and uncertainties associated with alternative options for graphite disposal, along with cost comparisons, thus enabling individual Member States to have the best-available information at their disposal to configure their own programs. (authors)

  1. Technical Standard For Multigassensors

    NASA Astrophysics Data System (ADS)

    Hübert, Th.; Banach, U.

    2009-05-01

    The guideline draft VDI/VDE 3518 describes the state-of-the-art of multigassensor technology and can support the use of multigassensors by supplying technical specifications and assistance for practical applications. It is divided in 5 parts concerning terms, structure and classification, testing of multigassensors, odor perception with electronic noses, specific applications and hints for appropriate applications. The first part briefly is presented contains and explanations and definitions of important terms, a description of construction and working procedure of multigassensors, a classification according to application categories and functionalities, minimum requirements on multigassensors, characteristic parameters and a scheme for assessment in quality grades.

  2. RADTRAN 6 Technical Manual

    SciTech Connect

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  3. RADTRAN 6 technical manual.

    SciTech Connect

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O'Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  4. Final Technical Report

    SciTech Connect

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  5. Comparison of air kerma measurements between the PTB and the IAEA for x-radiation qualities used in general diagnostic radiology and mammography

    NASA Astrophysics Data System (ADS)

    Csete, István; Büermann, Ludwig; Gomola, Igor; Girzikowsky, Reinhard

    2013-01-01

    A comparison of the air kerma standards for x-radiation qualities used in general diagnostic radiology and mammography, identified as EURAMET.RI(I)-S10 (EURAMET project #1221), was performed between the PTB and the IAEA. Two spherical and two parallel-plate reference-class ionization chambers of the IAEA and 12 beam qualities standardized in the IEC standard 61267:2005 plus 7 additional standard beam qualities established at both laboratories were selected for the comparison. The calibration coefficients were determined for the transfer chambers at the PTB in September 2012 and before and after this at the IAEA Dosimetry Laboratory. The results show the calibration coefficients of both laboratories to be in good agreement within the standard uncertainty of the comparison of about 0.47%. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by EURAMET, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  6. PREFACE: Light element atom, molecule and radical behaviour in the divertor and edge plasma regions

    NASA Astrophysics Data System (ADS)

    Braams, Bastiaan J.; Chung, Hyun-Kung

    2015-01-01

    This volume of Journal of Physics: Conference Series contains contributions by participants in an International Atomic Energy Agency (IAEA) Coordinated Research Project (CRP) on "Light element atom, molecule and radical behaviour in the divertor and edge plasma regions" (in magnetic fusion devices). Light elements are the dominant impurity species in fusion experiments and in the near-wall plasma they occur as atoms or ions and also as hydrides and other molecules and molecular ions. Hydrogen (H or D, and T in a reactor) is the dominant species in fusion experiments, but all light elements He - O and Ne are of interest for various reasons. Helium is a product of the D+T fusion reaction and is introduced in experiments for transport studies. Lithium is used for wall coating and also as a beam diagnostic material. Beryllium is foreseen as a wall material for the ITER experiment and is used on the Joint European Torus (JET) experiment. Boron may be used as a coating material for the vessel walls. Carbon (graphite or carbon-fiber composite) is often used as the target material for wall regions subject to high heat load. Nitrogen may be used as a buffer gas for edge plasma cooling. Oxygen is a common impurity in experiments due to residual water vapor. Finally, neon is another choice as a buffer gas. Data for collisional and radiative processes involving these species are important for plasma modelling and for diagnostics. The participants in the CRP met 3 times over the years 2009-2013 for a research coordination meeting. Reports and presentation materials for these meetings are available through the web page on coordinated research projects of the (IAEA) Atomic and Molecular Data Unit [1]. Some of the numerical data generated in the course of the CRP is available through the ALADDIN database [2]. The IAEA takes the opportunity to thank the participants in the CRP for their dedicated efforts in the course of the CRP and for their contributions to this volume. The IAEA

  7. Proceedings of the International Symposium on Technical and Vocational Education (Beijing, China, September 13-18, 1993).

    ERIC Educational Resources Information Center

    Chinese National Commission for UNESCO (China).

    This document contains 28 papers: "Technical and Vocational Education in Asia and the Pacific: Regional Overview and Recent Innovations" (Muhammad Ashraf Qureshi); "Secondary Education in Austria" (Helmut Aigner); "The Development of Technical Curricula in Austria" (Helmut Aigner); "Technical and Vocational Education in Australia. Australian…

  8. Mechanical Engineering Department. Technical review

    SciTech Connect

    Simecka, W.B.; Condouris, R.A.; Talaber, C.

    1980-01-01

    The Mechanical Engineering Department Technical Review is published to (1) inform the readers of various technical activities within the Department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical achievements and publication abstracts. The first is divided into eight sections, one for each Division in the Department providing the reader with the names of the personnel and the Division accomplishing the work.

  9. Mechanical engineering department technical review

    SciTech Connect

    Carr, R.B. Denney, R.M.

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  10. Mechanical Engineering Department technical abstracts

    SciTech Connect

    Denney, R.M.

    1982-07-01

    The Mechanical Engineering Department publishes listings of technical abstracts twice a year to inform readers of the broad range of technical activities in the Department, and to promote an exchange of ideas. Details of the work covered by an abstract may be obtained by contacting the author(s). Overall information about current activities of each of the Department's seven divisions precedes the technical abstracts.

  11. Mechanical Engineering Department Technical Review

    SciTech Connect

    Carr, R.B.; Denney, R.M.

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  12. Providing Effective Technical Assistance in Educational Settings. Part II: Implementing the Research--The Effective Delivery of Technical Assistance. Research Summary Report.

    ERIC Educational Resources Information Center

    Crohn, Leslie

    A two-part report, sponsored by the Northwest Regional Exchange, focuses on the role of technical assistance in educational settings. This document, part II of the report, examines selected change models for establishing technical assistance systems and implications for action. After a brief introduction, the following critical components of…

  13. Final Technical Report

    SciTech Connect

    Eckerlin, H, M, PhD PE; Leach, J, W, PhD PE; Terry, S, D, PhD PE

    2007-02-28

    The Industrial Assessment Center program at North Carolina State University has conducted one hundred industrial assessments of small and medium sized manufacturers in North Carolina, South Carolina, and Virginia. Reports were submitted to each facility that included a brief description of the plant, historical energy use, and a technical analysis of potential energy efficiency savings, waste reduction, and productivity savings. Seven hundred thirty eight conservation measures were recommended with total annual cost savings in excess of $18 million. The NCSU IAC has worked with other government and private entities to deliver energy efficiency and conservation services. We have worked closely with the NCSU Industrial Extension Service, the Manufacturer’s Extension Partnership (MEP), and the North Carolina State Energy Office to provide follow-up technical help and financial assistance in implementing conservation recommendations. In addition to these organizations, the NCSU IAC has also worked with the NC Department of Pollution Prevention and Environmental Assistance, the NC Solar Center, Advanced Energy Corporation, Duke Power, Progress Energy, Dominion Power, and the City of Danville, Virginia. Eighteen undergraduate and twenty graduate students were exposed to a variety of manufacturing processes, trained on plant safety, and taught the use of various types of data collection equipment. The students performed technical analyses of each recommendation, computed the potential savings from engineering relations and collected data, estimated the cost from vendor information, and communicated the findings in a compact, well written report to the client. The students have also been exposed to a variety of business personnel, including corporate presidents, engineering managers, plant managers, plant engineers, facility maintenance staff, and production workers – each with a unique perspective on the challenges faced in a modern manufacturing facility. The program

  14. Comparison of Homogeneous and Heterogeneous CFD Fuel Models for Phase I of the IAEA CRP on HTR Uncertainties Benchmark

    SciTech Connect

    Gerhard Strydom; Su-Jong Yoon

    2014-04-01

    Computational Fluid Dynamics (CFD) evaluation of homogeneous and heterogeneous fuel models was performed as part of the Phase I calculations of the International Atomic Energy Agency (IAEA) Coordinate Research Program (CRP) on High Temperature Reactor (HTR) Uncertainties in Modeling (UAM). This study was focused on the nominal localized stand-alone fuel thermal response, as defined in Ex. I-3 and I-4 of the HTR UAM. The aim of the stand-alone thermal unit-cell simulation is to isolate the effect of material and boundary input uncertainties on a very simplified problem, before propagation of these uncertainties are performed in subsequent coupled neutronics/thermal fluids phases on the benchmark. In many of the previous studies for high temperature gas cooled reactors, the volume-averaged homogeneous mixture model of a single fuel compact has been applied. In the homogeneous model, the Tristructural Isotropic (TRISO) fuel particles in the fuel compact were not modeled directly and an effective thermal conductivity was employed for the thermo-physical properties of the fuel compact. On the contrary, in the heterogeneous model, the uranium carbide (UCO), inner and outer pyrolytic carbon (IPyC/OPyC) and silicon carbide (SiC) layers of the TRISO fuel particles are explicitly modeled. The fuel compact is modeled as a heterogeneous mixture of TRISO fuel kernels embedded in H-451 matrix graphite. In this study, a steady-state and transient CFD simulations were performed with both homogeneous and heterogeneous models to compare the thermal characteristics. The nominal values of the input parameters are used for this CFD analysis. In a future study, the effects of input uncertainties in the material properties and boundary parameters will be investigated and reported.

  15. Final Technical Report

    SciTech Connect

    John Tanis

    2005-11-25

    This document comprises the final technical report for atomic collisions research supported by DOE grant No. DE-FG02-87ER13778 from September 1, 2001 through August 31, 2004. The research involved the experimental investigation of excitation and charge-changing processes occurring in ion-atom and ion-molecule collisions. Major emphases of the study were: (1) interference effects resulting from coherent electron emission in H2, (2) production of doubly vacant K-shell (hollow ion) states due to electron correlation, and (3) formation of long-lived metastable states in electron transfer processes. During the period of the grant, this research resulted in 23 publications, 12 invited presentations, and 39 contributed presentations at national and international meetings and other institutions. Brief summaries of the completed research are presented below.

  16. FINAL/ SCIENTIFIC TECHNICAL REPORT

    SciTech Connect

    McDonald, Henry; Singh, Suminderpal

    2006-08-28

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  17. Technical applications of aerogels

    SciTech Connect

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  18. LLNL 1981: technical horizons

    SciTech Connect

    Not Available

    1981-07-01

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  19. Technical Report - FINAL

    SciTech Connect

    Barbara Luke, Director, UNLV Engineering Geophysics Laboratory

    2007-04-25

    Improve understanding of the earthquake hazard in the Las Vegas Valley and to assess the state of preparedness of the area's population and structures for the next big earthquake. 1. Enhance the seismic monitoring network in the Las Vegas Valley 2. Improve understanding of deep basin structure through active-source seismic refraction and reflection testing 3. Improve understanding of dynamic response of shallow sediments through seismic testing and correlations with lithology 4. Develop credible earthquake scenarios by laboratory and field studies, literature review and analyses 5. Refine ground motion expectations around the Las Vegas Valley through simulations 6. Assess current building standards in light of improved understanding of hazards 7. Perform risk assessment for structures and infrastructures, with emphasis on lifelines and critical structures 8. Encourage and facilitate broad and open technical interchange regarding earthquake safety in southern Nevada and efforts to inform citizens of earthquake hazards and mitigation opportunities

  20. Technical vision for robots

    NASA Astrophysics Data System (ADS)

    1985-01-01

    A new invention by scientists who have copied the structure of a human eye will help replace a human telescope-watching astronomer with a robot. It will be possible to provide technical vision not only for robot astronomers but also for their industrial fellow robots. So far, an artificial eye with dimensions close to those of a human eye discerns only black-and-white images. But already the second model of the eye is to perceive colors as well. Polymers which are suited for the role of the coat of an eye, lens, and vitreous body were applied. The retina has been replaced with a bundle of the finest glass filaments through which light rays get onto photomultipliers. They can be positioned outside the artificial eye. The main thing is to prevent great losses in the light guide.

  1. Predictors of employer satisfaction: technical and non-technical skills.

    PubMed

    Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

    2012-01-01

    Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

  2. Does Being Technical Matter? XML, Single Source, and Technical Communication.

    ERIC Educational Resources Information Center

    Sapienza, Filipp

    2002-01-01

    Describes XML, a recent Web design language that will enable technical communicators to produce documentation that can reuse information and present it across multiple types of media for diverse audiences. Argues that XML requires more interdisciplinary approaches toward the teaching and research of technical communication, particularly with…

  3. Predictors of employer satisfaction: technical and non-technical skills.

    PubMed

    Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

    2012-01-01

    Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction. PMID:22433741

  4. Non-storm water discharges technical report

    SciTech Connect

    Mathews, S.

    1994-07-01

    Lawrence Livermore National Laboratory (LLNL) submitted a Notice of Intent to the California State Water Resources Control Board (hereafter State Board) to discharge storm water associated with industrial activities under the California General Industrial Activity Storm Water National Pollutant Elimination System Discharge Permit (hereafter General Permit). As required by the General Permit, LLNL provided initial notification of non-storm water discharges to the Central Valley Regional Water Quality Control Board (hereafter Regional Board) on October 2, 1992. Additional findings and progress towards corrective actions were reported in subsequent annual monitoring reports. LLNL was granted until March 27, 1995, three years from the Notice of Intent submission date, to eliminate or permit the non-storm water discharges. On May 20, 1994, the Regional Board issued Waste Discharge Requirements (WDR Board Order No. 94-131, NPDES No. CA0081396) to LLNL for discharges of non-contact cooling tower wastewater and storm water related to industrial activities. As a result of the issuance of WDR 94-131, LLNL rescinded its coverage under the General Permit. WDR 94-131 allowed continued non-storm water discharges and requested a technical report describing the discharges LLNL seeks to permit. For the described discharges, LLNL anticipates the Regional Board will either waive Waste Discharge Requirements as allowed for in The Water Quality Control Plan for the California Regional Water Quality Control Board, Central Valley Region (hereafter Basin Plan) or amend Board Order 94-131 as appropriate.

  5. Energy Impact Illinois - Final Technical Report

    SciTech Connect

    Olson, Daniel; Plagman, Emily; Silberhorn, Joey-Lin

    2014-02-18

    Energy Impact Illinois (EI2) is an alliance of government organizations, nonprofits, and regional utility companies led by the Chicago Metropolitan Agency for Planning (CMAP) that is dedicated to helping communities in the Chicago metropolitan area become more energy efficient. Originally organized as the Chicago Region Retrofit Ramp-Up (CR3), EI2 became part of the nationwide Better Buildings Neighborhood Program (BBNP) in May 2010 after receiving a $25 million award from the U.S. Department of Energy (DOE) authorized through the American Recovery and Reinvestment Act of 2009 (ARRA). The program’s primary goal was to fund initiatives that mitigate barriers to energy efficiency retrofitting activities across residential, multifamily, and commercial building sectors in the seven-county CMAP region and to help to build a sustainable energy efficiency marketplace. The EI2 Final Technical Report provides a detailed review of the strategies, implementation methods, challenges, lessons learned, and final results of the EI2 program during the initial grant period from 2010-2013. During the program period, EI2 successfully increased direct retrofit activity in the region and was able to make a broader impact on the energy efficiency market in the Chicago region. As the period of performance for the initial grant comes to an end, EI2’s legacy raises the bar for the region in terms of helping homeowners and building owners to take action on the continually complex issue of energy efficiency.

  6. The 1996 NAEP Technical Report.

    ERIC Educational Resources Information Center

    Allen, Nancy L.; Carlson, James E.; Zelenak, Christine A.

    This report documents the design, administration, and data analysis procedure of the National Assessment of Education Progress (NAEP) for 1996. It indicates the technical decisions that were made and the rationale behind them. Detailed substantive findings are not presented in this report. These chapters provide technical information about the…

  7. Aligning Career and Technical Education

    ERIC Educational Resources Information Center

    Workman, Ed; Stubbs, Joyce

    2011-01-01

    The issues and concerns facing Kentucky Career and Technical Teacher Education (KY CTTE), university teacher educators and state department Career and Technical Education (CTE) leaders in providing and preparing the best CTE teachers possible are not unique to Kentucky. In an effort to better understand these issues and concerns a team of state…

  8. Scientific and Technical Document Database

    National Institute of Standards and Technology Data Gateway

    NIST Scientific and Technical Document Database (PC database for purchase)   The images in NIST Special Database 20 contain a very rich set of graphic elements from scientific and technical documents, such as graphs, tables, equations, two column text, maps, pictures, footnotes, annotations, and arrays of such elements.

  9. Summer Technical Institute. Final Report.

    ERIC Educational Resources Information Center

    Packard, Beth

    The Summer Technical Institute project was funded by the Arizona Department of Education to encourage sex equity in vocational education in the state. The project was designed to (1) encourage young women to consider technical careers, (2) provide activities to promote success and self-confidence, (3) provide an opportunity for young women to…

  10. Technical Documentation and Legal Liability.

    ERIC Educational Resources Information Center

    Caher, John M.

    1995-01-01

    States that litigation over the interpretation and sufficiency of technical documentation is increasingly common as a number of suits have been filed in state and federal courts. Describes the case of "Martin versus Hacker," a recent case in which New York's highest court analyzed a technical writer's prose in the context of a lawsuit over a…

  11. Grid Interaction Technical Team Roadmap

    SciTech Connect

    2013-06-01

    The mission of the Grid Interaction Technical Team (GITT) is to support a transition scenario to large scale grid-connected vehicle charging with transformational technology, proof of concept and information dissemination. The GITT facilitates technical coordination and collaboration between vehicle-grid connectivity and communication activities among U.S. DRIVE government and industry partners.

  12. Technical Education for the Seventies.

    ERIC Educational Resources Information Center

    1969

    Presentations at the clinic focused on technical education programs under the Vocational Education Act of 1963 and the influence of the Vocational Education Amendments of 1968. The 12 presentations were grouped into three general subject areas. Four addresses discussed the emerging role of technical education, some suggestions for school-community…

  13. EDI and the Technical Communicator.

    ERIC Educational Resources Information Center

    Eiler, Mary Ann

    1994-01-01

    Assesses the role of technical communicators in electronic data interchange (EDI). Argues that, as experts in information design, human factors, instructional theory, and professional writing, technical communicators should be advocates of standard documentation protocols and should rethink the traditional concepts of "document" to include a…

  14. How to Read Technical Textbooks.

    ERIC Educational Resources Information Center

    Association of American Publishers, New York, NY.

    Intended for college bound students, this booklet explores textbook components to help students in their approach to studying technical information. After defining technical material and describing how to recognize it, the booklet discusses (1) symbols, (2) equations, (3) formulas, (4) theorems, (5) placement of symbols in textbooks, (6) tables,…

  15. Technical planning activity: Final report

    SciTech Connect

    Not Available

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  16. ATE Regional Centers: CCRC Final Report

    ERIC Educational Resources Information Center

    Reid, Monica; Jacobs, Jim; Ivanier, Analia; Morest, Vanessa Smith

    2007-01-01

    The purpose of this research study was to determine the role of regional centers in the Advanced Technical Education (ATE) program of the National Science Foundation (NSF). Conducted by the Community College Research Center (CCRC), the researchers began by asking whether the concept of a regional center was unique and useful to NSF's goals of…

  17. FINAL TECHNICAL REPORT

    SciTech Connect

    STEFAN VASILE; ZHENG LI

    2010-06-17

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  18. Final Technical Report

    SciTech Connect

    Stoessel, Chris

    2013-11-13

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  19. Final Technical Report

    SciTech Connect

    Dmitriy Y. Anistratov; Marvin L. Adams; Todd S. Palmer; Kord S. Smith; Kevin Clarno; Hikaru Hiruta; Razvan Nes

    2003-08-04

    OAK B202 Final Technical Report. The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations.

  20. [WHO Technical Report 921].

    PubMed

    Morii, Hirotoshi

    2005-04-01

    WHO Technical Report 921 "Prevention and Management of Osteoporosis" was published in 2003. WHO Scientific Group Meeting on Prevention and Management of Osteoporosis was organized in 1998. The members consisted of 21 scientists from all over the world with 2 experts in WHO. Contents of the book included introduction, pathogenesis of osteoporosis and related fractures, epidemiology and risk factors, diagnosis and assessment, prevention and treatment, socioeconomic aspects, delivery of care and education, summary and recommendations. Osteoporosis is a silent epidemic and destroys QOL in overwhelming populations in the world. Risk factors are different from country to country, but nutritional, genetic, life style and other factors are concerned in the pathogenesis of the disease. Appropriate assessment and diagnosis are essential for the evaluation who should be treated. Many kinds of drugs have been developed for the treatment. Many ways for treating patients with fractures have been proposed. However, the establishment of systems of care is needed with aids of both governmental and non-governmental organizations. Finally education of citizens is very important. PMID:15802765

  1. Final Technical Report

    SciTech Connect

    Frederick J. Carranti, P.E.

    2008-02-27

    During the contract period noted above, the Syracuse University Industrial Assessment Center conducted 97.5 assessment days for 98 different industrial clients. These assessments developed 818 assessment recommendations with an overall implementation rate of 51 % (AR’s). Total recommended dollar savings for the period was $17,386,758.00, with $8,893,212.00 actually implemented, for a dollar implementation rate of 57%. The Center employed a total of sixteen undergraduate interns throughout the contract period. Nine of these students stayed on at Syracuse University for graduate study with Center support; five students pursued graduate study at other universities. Ten of these students have, or will, accept professional positions in the energy consulting field. The Center has successfully engaged with a wide variety of professional and development organizations, including the Manufacturers Association of Central New York, The Central New York Technical Development Organization, (the local MEP), the New York State Energy Research and Development Authority, The New York Power Authority, the Onondaga County Citizens Energy Committee, and the New York State Center of Excellence on Indoor Environmental Systems.

  2. GEM Technical Design Report

    SciTech Connect

    Not Available

    1993-07-31

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  3. Technical-Vocational Education and Language Policy in Ghana

    ERIC Educational Resources Information Center

    Adogpa, James Nsoh

    2015-01-01

    Technical and vocational graduates in Ghana are often ill-equipped to become self-reliant or well-fitted into the demands of the job market. This pattern can be examined in terms of the educational language policy implementation that disregards regional linguistic needs. This seems to arise as a result of the medium of instruction that is…

  4. Building a Prosperous Economy. Washington's Community and Technical Colleges

    ERIC Educational Resources Information Center

    Washington State Board for Community and Technical Colleges, 2014

    2014-01-01

    Washington's community and technical colleges are a collective, powerful, unmatched resource for advancing prosperity through education. These 34 colleges not only connect with employers in the regions where they operate, but also with each other through common programs--like advanced manufacturing and allied health--that align with Washington's…

  5. National Planning of Vocational and Technical Training, 1972.

    ERIC Educational Resources Information Center

    Colombo Plan Bureau (Sri Lanka).

    This document contains the proceedings of the fifth of a series of seminars developed by the Colombo Plan Bureau to serve as a catalyst in the planning and development of skilled manpower in the Colombo region of south and southeast Asia. The seminars resulted from a realization that the shortage of technical and skilled manpower in the area is…

  6. Computer Education Curriculum. Connecticut Vocational Technical School System. Version 4.

    ERIC Educational Resources Information Center

    Kittell, Linda; Walczak, Joseph

    This computer education curriculum is designed specifically for Connecticut's Regional Vocational Technical Schools' grade 9 computer education course. Each of the 24 lessons is expected to cover at least one class period of 50 minutes. Introductory materials include a listing of course goals and objectives, an outline of sequence and scope via…

  7. 7 CFR 652.5 - Participant acquisition of technical services.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... prior to program participation based on available funding and natural resource priorities as identified... for technical services using national, regional, and locally determined price data. (2) Establishing... local NRCS cost data, procurement data, and market data. (iii) National Headquarters will review...

  8. Reform of Technical-Vocational Education in Indonesia and Malaysia.

    ERIC Educational Resources Information Center

    Wilson, David N.

    1991-01-01

    Examines the growth and reform of technical-vocational education and training in two South-East Asian Ministers of Education Organisation (SEAMEO) member nations: Indonesia and Malaysia. Traces similarities and differences between the two systems, which will be extended to other SEAMEO member states by the new SEAMEO Regional Centre for Vocational…

  9. Testing the methodology for dosimetry audit of heterogeneity corrections and small MLC-shaped fields: Results of IAEA multi-center studies

    PubMed Central

    Izewska, Joanna; Wesolowska, Paulina; Azangwe, Godfrey; Followill, David S.; Thwaites, David I.; Arib, Mehenna; Stefanic, Amalia; Viegas, Claudio; Suming, Luo; Ekendahl, Daniela; Bulski, Wojciech; Georg, Dietmar

    2016-01-01

    Abstract The International Atomic Energy Agency (IAEA) has a long tradition of supporting development of methodologies for national networks providing quality audits in radiotherapy. A series of co-ordinated research projects (CRPs) has been conducted by the IAEA since 1995 assisting national external audit groups developing national audit programs. The CRP ‘Development of Quality Audits for Radiotherapy Dosimetry for Complex Treatment Techniques’ was conducted in 2009–2012 as an extension of previously developed audit programs. Material and methods. The CRP work described in this paper focused on developing and testing two steps of dosimetry audit: verification of heterogeneity corrections, and treatment planning system (TPS) modeling of small MLC fields, which are important for the initial stages of complex radiation treatments, such as IMRT. The project involved development of a new solid slab phantom with heterogeneities containing special measurement inserts for thermoluminescent dosimeters (TLD) and radiochromic films. The phantom and the audit methodology has been developed at the IAEA and tested in multi-center studies involving the CRP participants. Results. The results of multi-center testing of methodology for two steps of dosimetry audit show that the design of audit procedures is adequate and the methodology is feasible for meeting the audit objectives. A total of 97% TLD results in heterogeneity situations obtained in the study were within 3% and all results within 5% agreement with the TPS predicted doses. In contrast, only 64% small beam profiles were within 3 mm agreement between the TPS calculated and film measured doses. Film dosimetry results have highlighted some limitations in TPS modeling of small beam profiles in the direction of MLC leave movements. Discussion. Through multi-center testing, any challenges or difficulties in the proposed audit methodology were identified, and the methodology improved. Using the experience of these

  10. DXA: Technical aspects and application.

    PubMed

    Bazzocchi, Alberto; Ponti, Federico; Albisinni, Ugo; Battista, Giuseppe; Guglielmi, Giuseppe

    2016-08-01

    The key role of dual-energy X-ray absorptiometry (DXA) in the management of metabolic bone diseases is well known. The role of DXA in the study of body composition and in the clinical evaluation of disorders which directly or indirectly involve the whole metabolism as they may induce changes in body mass and fat percentage is less known or less understood. DXA has a range of clinical applications in this field, from assessing associations between adipose or lean mass and the risk of disease to understanding and measuring the effects of pathophysiological processes or therapeutic interventions, in both adult and paediatric human populations as well as in pre-clinical settings. DXA analyses body composition at the molecular level that is basically translated into a clinical model made up of fat mass, non-bone lean mass, and bone mineral content. DXA allows total and regional assessment of the three above-mentioned compartments, usually by a whole-body scan. Since body composition is a hot topic today, manufacturers have steered the development of DXA technology and methodology towards this. New DXA machines have been designed to accommodate heavier and larger patients and to scan wider areas. New strategies, such as half-body assessment, permit accurate body scan and analysis of individuals exceeding scan field limits. Although DXA is a projective imaging technique, new solutions have recently allowed the differential estimate of subcutaneous and intra-abdominal visceral fat. The transition to narrow fan-beam densitometers has led to faster scan times and better resolution; however, inter- or intra-device variation exists depending on several factors. The purposes of this review are: (1) to appreciate the role of DXA in the study of body composition; (2) to understand potential limitations and pitfalls of DXA in the analysis of body composition; (3) to learn about technical elements and methods, and to become familiar with biomarkers in DXA. PMID:27157852

  11. Engineering Technical Review Planning Briefing

    NASA Technical Reports Server (NTRS)

    Gardner, Terrie

    2012-01-01

    The general topics covered in the engineering technical planning briefing are 1) overviews of NASA, Marshall Space Flight Center (MSFC), and Engineering, 2) the NASA Systems Engineering(SE) Engine and its implementation , 3) the NASA Project Life Cycle, 4) MSFC Technical Management Branch Services in relation to the SE Engine and the Project Life Cycle , 5) Technical Reviews, 6) NASA Human Factor Design Guidance , and 7) the MSFC Human Factors Team. The engineering technical review portion of the presentation is the primary focus of the overall presentation and will address the definition of a design review, execution guidance, the essential stages of a technical review, and the overall review planning life cycle. Examples of a technical review plan content, review approaches, review schedules, and the review process will be provided and discussed. The human factors portion of the presentation will focus on the NASA guidance for human factors. Human factors definition, categories, design guidance, and human factor specialist roles will be addressed. In addition, the NASA Systems Engineering Engine description, definition, and application will be reviewed as background leading into the NASA Project Life Cycle Overview and technical review planning discussion.

  12. A cheap technical solution for cranioplasty treatments.

    PubMed

    Hieu, L C; Vander Sloten, J; Bohez, E; Phien, H N; Vatcharaporn, E; An, P V; To, N C; Binh, P H

    2004-01-01

    Skull defects are treated by cranioplasty techniques, which are required to protect underlying brain, correct major aesthetic deformities, or both. This research is a part of our research project in ASEAN countries to investigate (i) the methods for design and manufacturing of cranioplasty implants, and (ii) the feasible technical solutions of minimizing the implant cost based on available production and biomaterial technologies in the region. In this paper, solutions for design and manufacturing of standardized implant templates (SDT) are presented. SDT are made based on the reverse engineering and rapid tooling techniques. With the use of SDT, surgeons have flexible options in preparing the implant both pre and intra operatively, and the operation time is minimized. In addition, the skills required to prepare an implant from SDT are not highly required. The cost for cranioplasty treatments by using SDT is acceptable for ASEAN region.

  13. Australia: A New Technical Teacher College

    ERIC Educational Resources Information Center

    Senior, R. L.

    1969-01-01

    A new technical teacher college will open its doors in Hawthorn, Victoria, in January 1970. R.L. Senior, Inspector of Technical Schools, describes the development of technical teacher training in the State. (Editor)

  14. Technical Standards Products Informing NASA Quality Practices

    NASA Technical Reports Server (NTRS)

    Oberhettinger, David

    2006-01-01

    This viewgraph presentation includes formal definitions of standards (external and internal), as well as discussions of the importance of standards to NASA, current technical standards issues, the NASA technical standards program, and provides technical standards resources.

  15. Providing Effective Technical Assistance in Educational Settings. Part I: A Research Synthesis. Research Summary Report.

    ERIC Educational Resources Information Center

    Crohn, Leslie

    A two-part report, sponsored by the Northwest Regional Exchange, focuses on the role of technical assistance in educational settings. This document, part I of the report, presents an overview of major research and literature findings, including the extant knowledge base and the state of the art in technical assistance. The introduction discusses…

  16. Technical Assistance and Dissemination Conference (8th, Washington, D.C., March 2-4, 1998).

    ERIC Educational Resources Information Center

    Federal Resource Center for Special Education, Washington, DC.

    This document reports on a 1998 conference on technical assistance and dissemination attended by representatives from the Department of Education's Office of Special Education Programs (OSEP), Technical Assistance and Dissemination (TA&D) projects, and regional resource centers. The conference was intended to increase knowledge concerning TA&D,…

  17. User Problems Associated with the Services of Federal and Quasi-Federal Technical Information Producing Agencies.

    ERIC Educational Resources Information Center

    Los Angeles Regional Technical Information Users Council, CA.

    Nine reports of the Los Angeles Regional Technical Information Users Council, which identify and discuss user problem areas and recommend solutions, comprise this document. The topics of the reports are: (1) Air Force Technical Objective Document Release Program (AFTOD); (2) Army Qualitative Requirements Information Program (QDRI); (3)…

  18. Surgeons' non-technical skills.

    PubMed

    Yule, Steven; Paterson-Brown, Simon

    2012-02-01

    The importance of non-technical skills to surgical performance is gaining wide acceptance. This article discusses the core cognitive and social skills categories thought to underpin medical knowledge and surgical expertise, and describes the rise of non-technical skill models of assessment in surgery. Behavior rating systems such as NOTSS (Non-Technical Skills for Surgeons) have been developed to support education and assessment in this regard. We now understand more about these critical skills and how they impact surgery. The challenge in the future is to incorporate them into undergraduate teaching, postgraduate training, workplace assessment, and perhaps even selection.

  19. Final Technical Report

    SciTech Connect

    Juan Camilo Serrano

    2011-12-16

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  20. CTBT technical issues handbook

    SciTech Connect

    Zucca, J.J.

    1994-05-01

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  1. Using Technical Performance Measures

    NASA Technical Reports Server (NTRS)

    Garrett, Christopher J.; Levack, Daniel J. H.; Rhodes, Russel E.

    2011-01-01

    All programs have requirements. For these requirements to be met, there must be a means of measurement. A Technical Performance Measure (TPM) is defined to produce a measured quantity that can be compared to the requirement. In practice, the TPM is often expressed as a maximum or minimum and a goal. Example TPMs for a rocket program are: vacuum or sea level specific impulse (lsp), weight, reliability (often expressed as a failure rate), schedule, operability (turn-around time), design and development cost, production cost, and operating cost. Program status is evaluated by comparing the TPMs against specified values of the requirements. During the program many design decisions are made and most of them affect some or all of the TPMs. Often, the same design decision changes some TPMs favorably while affecting other TPMs unfavorably. The problem then becomes how to compare the effects of a design decision on different TPMs. How much failure rate is one second of specific impulse worth? How many days of schedule is one pound of weight worth? In other words, how to compare dissimilar quantities in order to trade and manage the TPMs to meet all requirements. One method that has been used successfully and has a mathematical basis is Utility Analysis. Utility Analysis enables quantitative comparison among dissimilar attributes. It uses a mathematical model that maps decision maker preferences over the tradeable range of each attribute. It is capable of modeling both independent and dependent attributes. Utility Analysis is well supported in the literature on Decision Theory. It has been used at Pratt & Whitney Rocketdyne for internal programs and for contracted work such as the J-2X rocket engine program. This paper describes the construction of TPMs and describes Utility Analysis. It then discusses the use of TPMs in design trades and to manage margin during a program using Utility Analysis.

  2. Evolution of the Kazakstan export control system: The critical role of technical expertise

    SciTech Connect

    Wolfe, K.D.; Cernicek, A.T.

    1997-11-01

    The U.S. Department of Energy (DOE) Nuclear Transfer and Supplier Policy Division is sponsoring technical cooperative agreements between Kazakstani partners and U.S. National Laboratories. Those agreements allow Kazakstan to make both political and technical advances in their nuclear export control policy. Kazakstan has shown a very serious commitment to nonproliferation ever since its independence and the subsequent rapid closing of the Semipalatinsk test site in 1991. The experience Kazakstan had with the test site, which was one of the more active in the world, has largely shaped its strong commitment to global nonproliferation. Kazakstan has taken seriously its responsibility for nuclear nonproliferation. Some of the many examples of that commitment are the complete disarmament of all inherited nuclear weapons, the 1994 signing of the Treaty on Nonproliferation of Nuclear Weapons, the completion of a full-scope safeguards agreement with the IAEA, and the transfer of 600 kg of highly enriched uranium to the United States through Project Sapphire. These actions all exhibit a strong Kazakstani devotion to nuclear nonproliferation. Moreover, there are a variety of programs dealing with the very sensitive and important topic of material protection, control, and accounting (MPC&A) for the many nuclear sites within Kazakstan.

  3. Radioactive sealed sources: Reasonable accountability, exemption, and licensing activity thresholds -- A technical basis

    SciTech Connect

    Lee, D.W.; Shingleton, K.L.

    1996-07-01

    Perhaps owing to their small size and portability, some radiation accidents/incidents have involved radioactive sealed sources (RSSs). As a result, programs for the control and accountability of RSSs have come to be recommended and emplaced that essentially require RSSs to be controlled in a manner different from bulk, unsealed radioactive material. Crucially determining the total number of RSSs for which manpower-intensive radiation protection surveillance is provided is the individual RSS activity above which such surveillance is required and below which such effort is not considered cost effective. Individual RSS activity thresholds are typically determined through scenarios which impart a chosen internal or external limiting dose to Reference Man under specified exposure conditions. The resultant RSS threshold activity levels have meaning commensurate with the assumed scenario exposure parameters, i.e., if they are realistic and technically based. A review of how the Department of Energy (DOE), the International Atomic Energy Agency (IAEA), and the Nuclear Regulatory Commission (NRC) have determined their respective accountability, exemption, and licensing threshold activity values is provided. Finally, a fully explained method using references readily available to practicing health physicists is developed using realistic, technically-based calculation parameters by which RSS threshold activities may be locally generated.

  4. Hydrogen Storage Technical Team Roadmap

    SciTech Connect

    2013-06-01

    The mission of the Hydrogen Storage Technical Team is to accelerate research and innovation that will lead to commercially viable hydrogen-storage technologies that meet the U.S. DRIVE Partnership goals.

  5. Fuel Cell Technical Team Roadmap

    SciTech Connect

    2013-06-01

    The Fuel Cell Technical Team promotes the development of a fuel cell power system for an automotive powertrain that meets the U.S. DRIVE Partnership (United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability) goals.

  6. Social Awareness in Technical Systems

    NASA Astrophysics Data System (ADS)

    Müller-Schloer, Christian; Pacher, Mathias; Bernard, Yvonne; Klejnowski, Lukas

    The following sections are included: * Introduction * Self-Governing Institutions * Technical Agent Societies * Trusted communities * The social agent * From implicit to explicit trusted communities * No Society without Rules * Outlook

  7. Private Trade and Technical Schools.

    ERIC Educational Resources Information Center

    David, Christopher

    1983-01-01

    Among the advantages of private trade and technical schools is their market orientation, a sensitivity to employers' current needs. Teachers recruited from industry, accelerated pace, flexible scheduling, and emphasis on job placement are other benefits found in proprietary schools. (SK)

  8. Final technical report

    SciTech Connect

    Johnson, C.; Long, S.; Li, Binsheng; Lamke, A.J.

    1994-07-01

    The overall goal of the contract is to provide general support and advice to the DOE, Office of Fossil Energy (DOE/EF) on the opportunities for coal and Clean Coal Technology trade in the Asia-Pacific region. The report which follows is divided into six subsections, each pertaining to separate subtasks the U.S. Department of Energy requested. Subtask A includes two reports, one which outlines important coal and clean coal technology news events which occurred during the second half of 1993, and another which outlines the potential for Clean Coal Technology in the Asia-Pacific Region. Subtask B and the first paper in Subtask C contain advisories and briefing papers that present and explain the coal, electricity and Clean Coal Technology situation in China. The second paper in Subtask C is an overview of the coal supply, demand and trade situation in the Asian region with coal projections to the year 2010. Subtask D is an overview of meetings with Asian energy and policy representatives which were carried out to (1) gather key information relevant to this contract, and (2) examine areas for closer cooperation on important coal/CCT-related energy issues. The tasks listed in the contract proposal as Subtasks E and F are summarized in respective sections of this report. Subtask E specifies the activities carried out under the APEC Experts` Group on Clean Coal Technologies, and Subtask F explains the work done by the Coal Project in building contacts and working relationships with key energy and technology planners in China (including The State Science and Technology Commission, the Ministry of Electric Power and Tsinghua University, and the State Planning Commission). The Subtask E section also includes activities to develop and strengthen the role of the APEC Experts Group on Clean Coal Activities.

  9. NetView technical research

    NASA Technical Reports Server (NTRS)

    1993-01-01

    This is the Final Technical Report for the NetView Technical Research task. This report is prepared in accordance with Contract Data Requirements List (CDRL) item A002. NetView assistance was provided and details are presented under the following headings: NetView Management Systems (NMS) project tasks; WBAFB IBM 3090; WPAFB AMDAHL; WPAFB IBM 3084; Hill AFB; McClellan AFB AMDAHL; McClellan AFB IBM 3090; and Warner-Robins AFB.

  10. Guam Initial Technical Assessment Report

    SciTech Connect

    Baring-Gould, I.; Conrad, M.; Haase, S.; Hotchkiss, E.; McNutt, P.

    2011-04-01

    Under an interagency agreement, funded by the Department of Interior's (DOI) Office of Insular Affairs (OIA), the National Renewable Energy Laboratory (NREL) was tasked to deliver technical assistance to the island of Guam by conducting an island initial technical assessment that would lay out energy consumption and production data and establish a baseline. This assessment will be used to conduct future analysis and studies by NREL that will estimate energy efficiency and renewable energy potential for the island of Guam.

  11. Final Technical Report

    SciTech Connect

    Bohdan W. Oppenheim; Rudolf Marloth

    2007-10-26

    Executive Summary The document contains Final Technical Report on the Industrial Assessment Center Program at Loyola Marymount University in Los Angeles, covering the contract period of 9/1/2002 to 11/30/2006, under the contract DE-FC36-02GO 12073. The Report describes six required program tasks, as follows: TASK 1 is a summary of the assessments performed over the life of the award: 77 assessments were performed, 595 AR were recommended, covering a very broad range of manufacturing plants. TASK 2 is a description of the efforts to promote and increase the adoption of assessment recommendations and employ innovative methods to assist in accomplishing these goals. The LMU IAC has been very successful in accomplishing the program goals, including implemented savings of $5,141,895 in energy, $10,045,411 in productivity and $30,719 in waste, for a total of $15,218,025. This represents 44% of the recommended savings of $34,896,392. TASK 3 is a description of the efforts promoting the IAC Program and enhancing recruitment efforts for new clients and expanded geographic coverage. LMU IAC has been very successful recruiting new clients covering Southern California. Every year, the intended number of clients was recruited. TASK 4 describes the educational opportunities, training, and other related activities for IAC students. A total of 38 students graduated from the program, including 2-3 graduate students every semester, and the remainder undergraduate students, mostly from the Mechanical Engineering Department. The students received formal weekly training in energy (75%) and productivity (25). All students underwent extensive safety training. All students praised the IAC experience very highly. TASK 5 describes the coordination and integration of the Center activities with other Center and IAC Program activities, and DOE programs. LMU IAC worked closely with MIT, and SDSU IAC and SFSU IAC, and enthusiastically supported the SEN activities. TASK 6 describes other tasks

  12. Overall results of and lessons learned from the IAEA CRP on sodium natural circulation test performed during the Phenix end-of-life experiments

    SciTech Connect

    Monti, S.; Toti, A.; Tenchine, D.; Pialla, D.

    2012-07-01

    In 2007, the International Atomic Energy Agency (IAEA) launched the Coordinated Research Project (CRP) 'Control Rod Withdrawal and Sodium Natural Circulation Tests Performed during the Phenix End-of-Life Experiments'. The overall purpose of the CRP, performed within the framework of the IAEA programme in support of innovative fast reactor technology development and deployment, is to improve the Member States' analytical capabilities in the various fields of research and design of sodium-cooled fast reactors through data and codes verification and validation. In particular the CRP, taking advantage of the End-of-Life set of experiments performed before the final shut-down of the French prototype fast breeder power reactor Phenix, aims at improving fast reactor simulation methods and design capabilities in the field of temperature and power distribution evaluation, as well as of the analysis of sodium natural circulation phenomena. The paper presents the overall results of the CRP, including blind calculations and post-test and sensitivity analyses carried out by the CRP participants, as well as lessons learned and recommendations for further future implementations to resolve open issues. (authors)

  13. Final Technical Report

    SciTech Connect

    Brizard, Alain J

    2009-12-31

    Final Technical Report for U.S. Department of Energy Grant No. DE-FG02-09ER55005 Nonlinear FLR Effects in Reduced Fluid Models Alain J. Brizard, Saint Michael's College The above-mentioned DoE grant was used to support research activities by the PI during a sabbatical leave from Saint Michael's College in 2009. The major focus of the work was the role played by guiding-center and gyrocenter (linear and nonlinear) polarization and magnetization effects in understanding transport processes in turbulent magnetized plasmas. The theoretical tools used for this work include Lie-transform perturbation methods and Lagrangian (variational) methods developed by the PI in previous work. The present final technical report lists (I) the peer-reviewed publications that were written based on work funded by the Grant; (II) invited and contributed conference presentations during the period funded by the Grant; and (III) seminars presented during the period funded by the Grant. I. Peer-reviewed Publications A.J. Brizard and N. Tronko, 2011, Exact momentum conservation for the gyrokinetic Vlasov- Poisson equations, Physics of Plasmas 18 , 082307:1-14 [http://dx.doi.org/10.1063/1.3625554 ]. J. Decker, Y. Peysson, A.J. Brizard, and F.-X. Duthoit, 2010, Orbit-averaged guiding-center Fokker-Planck operator for numerical applications, Physics of Plasmas 17, 112513:1-12 [http://dx.doi.org/10.1063/1.3519514]. A.J. Brizard, 2010, Noether derivation of exact conservation laws for dissipationless reduced fluid models, Physics of Plasmas 17, 112503:1-8 [http://dx.doi.org/10.1063/1.3515303]. F.-X. Duthoit, A.J. Brizard, Y. Peysson, and J. Decker, 2010, Perturbation analysis of trapped particle dynamics in axisymmetric dipole geometry, Physics of Plasmas 17, 102903:1-9 [http://dx.doi.org/10.1063/1.3486554]. A.J. Brizard, 2010, Exact energy conservation laws for full and truncated nonlinear gyrokinetic equations, Physics of Plasmas 17, 042303:1-11 [http://dx.doi.org/10.1063/1.3374428]. A

  14. Reader-Centered Technical Writing

    NASA Astrophysics Data System (ADS)

    Narayanan, M.

    2012-12-01

    Technical writing is an essential part of professional communication and in recent years it has shifted from a genre-based approach. Formerly, technical writing primarily focused on generating templates of documents and sometimes it was creating or reproducing traditional forms with minor modifications and updates. Now, technical writing looks at the situations surrounding the need to write. This involves deep thinking about the goals and objectives of the project on hand. Furthermore, one observes that it is very important for any participatory process to have the full support of management. This support needs to be well understood and believed by employees. Professional writing may be very persuasive in some cases. When presented in the appropriate context, technical writing can persuade a company to improve work conditions ensuring employee safety and timely production. However, one must recognize that lot of professional writing still continues to make use of reports and instruction manuals. Normally, technical and professional writing addresses four aspects. Objective: The need for generating a given professionally written technical document and the goals the document is expected to achieve and accomplish. Clientele: The clientele who will utilize the technical document. This may include the people in the organization. This may also include "unintended readers." Customers: The population that may be affected by the content of the technical document generated. This includes the stakeholders who will be influenced. Environment: The background in which the document is created. Also, the nature of the situation that warranted the generation of the document. Swiss Psychologist Jean Piaget's view of Learning focuses on three aspects. The author likes to extend Jean Piaget's ideas to students, who are asked to prepare and submit Reader-Centered Technical Writing reports and exercises. Assimilation: Writers may benefit specifically, by assimilating a new object into

  15. The IAEA coordinated research programme on HTGR uncertainty analysis: Phase I status and Ex. I-1 prismatic reference results

    DOE PAGES

    Bostelmann, Friederike; Strydom, Gerhard; Reitsma, Frederik; Ivanov, Kostadin

    2016-01-11

    The quantification of uncertainties in design and safety analysis of reactors is today not only broadly accepted, but in many cases became the preferred way to replace traditional conservative analysis for safety and licensing analysis. The use of a more fundamental methodology is also consistent with the reliable high fidelity physics models and robust, efficient, and accurate codes available today. To facilitate uncertainty analysis applications a comprehensive approach and methodology must be developed and applied, in contrast to the historical approach where sensitivity analysis were performed and uncertainties then determined by a simplified statistical combination of a few important inputmore » parameters. New methodologies are currently under development in the OECD/NEA Light Water Reactor (LWR) Uncertainty Analysis in Best-Estimate Modelling (UAM) benchmark activity. High Temperature Gas-cooled Reactor (HTGR) designs require specific treatment of the double heterogeneous fuel design and large graphite quantities at high temperatures. The IAEA has therefore launched a Coordinated Research Project (CRP) on HTGR Uncertainty Analysis in Modelling (UAM) in 2013 to study uncertainty propagation specifically in the HTGR analysis chain. Two benchmark problems are defined, with the prismatic design represented by the General Atomics (GA) MHTGR-350 and a 250 MW modular pebble bed design similar to the Chinese HTR-PM. Work has started on the first phase and the current CRP status is reported in the paper. A comparison of the Serpent and SCALE/KENO-VI reference Monte Carlo results for Ex. I-1 of the MHTGR-350 design is also included. It was observed that the SCALE/KENO-VI Continuous Energy (CE) k∞ values were 395 pcm (Ex. I-1a) to 803 pcm (Ex. I-1b) higher than the respective Serpent lattice calculations, and that within the set of the SCALE results, the KENO-VI 238 Multi-Group (MG) k∞ values were up to 800 pcm lower than the KENO-VI CE values. The use of the

  16. Global isoscapes for δ18O and δ2H in precipitation: improved prediction using regionalized climatic regression models

    NASA Astrophysics Data System (ADS)

    Terzer, S.; Wassenaar, L. I.; Araguás-Araguás, L. J.; Aggarwal, P. K.

    2013-11-01

    A regionalized cluster-based water isotope prediction (RCWIP) approach, based on the Global Network of Isotopes in Precipitation (GNIP), was demonstrated for the purposes of predicting point- and large-scale spatio-temporal patterns of the stable isotope composition (δ2H, δ18O) of precipitation around the world. Unlike earlier global domain and fixed regressor models, RCWIP predefined 36 climatic cluster domains and tested all model combinations from an array of climatic and spatial regressor variables to obtain the best predictive approach to each cluster domain, as indicated by root-mean-squared error (RMSE) and variogram analysis. Fuzzy membership fractions were thereafter used as the weights to seamlessly amalgamate results of the optimized climatic zone prediction models into a single predictive mapping product, such as global or regional amount-weighted mean annual, mean monthly, or growing-season δ18O/δ2H in precipitation. Comparative tests revealed the RCWIP approach outperformed classical global-fixed regression-interpolation-based models more than 67% of the time, and clearly improved upon predictive accuracy and precision. All RCWIP isotope mapping products are available as gridded GeoTIFF files from the IAEA website (iaea.org/water"target="_blank">www.iaea.org/water) and are for use in hydrology, climatology, food authenticity, ecology, and forensics.

  17. Global isoscapes for δ18O and δ2H in precipitation: improved prediction using regionalized climatic regression models

    NASA Astrophysics Data System (ADS)

    Terzer, S.; Wassenaar, L. I.; Araguás-Araguás, L. J.; Aggarwal, P. K.

    2013-06-01

    A Regionalized Climatic Water Isotope Prediction (RCWIP) approach, based on the Global Network for Isotopes in Precipitation (GNIP), was demonstrated for the purposes of predicting point- and large-scale spatiotemporal patterns of the stable isotope compositions of water (δ2H, δ18O) in precipitation around the world. Unlike earlier global domain and fixed regressor models, RCWIP pre-defined thirty-six climatic cluster domains, and tested all model combinations from an array of climatic and spatial regressor variables to obtain the best predictive approach to each cluster domain, as indicated by RMSE and variogram analysis. Fuzzy membership fractions were thereafter used as the weights to seamlessly amalgamate results of the optimized climatic zone prediction models into a single predictive mapping product, such as global or regional amount-weighted mean annual, mean monthly or growing-season δ18O/δ2H in precipitation. Comparative tests revealed the RCWIP approach outperformed classical global-fixed regression-interpolation based models more than 67% of the time, and significantly improved upon predictive accuracy and precision. All RCWIP isotope mapping products are available as gridded GeoTIFF files from the IAEA website (iaea.org/water"target="_blank">www.iaea.org/water) and are for use in hydrology, climatology, food authenticity, ecology, and forensics.

  18. 49 CFR 552.6 - Technical review.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 6 2012-10-01 2012-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together...

  19. 49 CFR 552.6 - Technical review.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 6 2014-10-01 2014-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together...

  20. 49 CFR 552.6 - Technical review.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 6 2011-10-01 2011-10-01 false Technical review. 552.6 Section 552.6... § 552.6 Technical review. The appropriate Associate Administrator conducts a technical review of the petition. The technical review may consist of an analysis of the material submitted, together...

  1. Technical Support and Transfer of Geothrmal Technical Knowledge and Information

    SciTech Connect

    John W. Lund Tonya "Toni" Boyd

    2007-11-14

    The Geo-Heat Center (GHC) staff provided responses to 1442 technical support requests during the contract period (April 1, 2006 to September 30, 2007), which were six quarters under this contract. Our website, consisting of 1900 files, also contributes to our technical assistance activity. Downloaded files were 1,889,323 (3,448 per day) from our website, the total number of users was 1,365,258 (2,491 per day), and the total number of hits were 6,008,500 (10,064 per day). The GHC staff attended 60 workshops, short course and professional meeting and made 29 technical presentations. The staff also prepared and mailed out 2,000 copies of each of five issues of the GHC Quaterly Bulletin which contained 26 articles. We also mailed out approximately 5,000 papers and publications to interested individuals and organizations.

  2. Regional odontodysplasia.

    PubMed

    Mehta, D N; Bailoor, D; Patel, B

    2011-01-01

    Regional odontodysplasia is an unusual developmental anomaly in which ectodermal and mesodermal tooth components are affected. We present a rare case of a developmental anomaly called regional odontodysplasia or 'ghost teeth' in a 12-year-old Indian girl. The anomaly affected right maxillary permanent teeth. The mandibular teeth were unaffected. The clinical, radiographic and histological features are reviewed. The management of affected patients is discussed.

  3. Final Technical Report

    SciTech Connect

    Hittle, Dr. Douglas C.; Kostrzewa, Michael F.

    2007-10-19

    The Department of Energy’s Industrial Assessment Center at Colorado State University (CSU IAC) has been helping manufacturers in Colorado and the Rocky Mountain region save energy, reduce waste, and save money while helping to produce highly-trained and highly-capable energy engineers since 1984. The most recent four-year contract continues that trend. This contract ran from September 1, 2002 through May 31, 2007 and included assessments conducted from September 1, 2002 through August 31, 2006. During this contract, the CSU IAC served 77 manufacturers in six Rocky Mountain States and recommended about 311,800 MMBtu/yr in energy savings, 12.6 million gallons of waste water reduction per year, nearly 650,000 pounds of solid waste reduction per year, and more than 5,600 gallons of hazardous solid waste per year, saving more than $9.54 million dollars per year in utility, waste disposal, raw material, and labor costs. Total expenditures for the period were about $814,000 for the period or about $203,500 per year. Thus, the CSU IAC generated almost 12 times more recommended cost savings than the project cost. In addition, the program employed 24 undergraduate mechanical and civil engineering students and seven graduate mechanical engineering students. Of these students, more than 75% have gone on to successful careers in energy engineering or manufacturing, where they continue to provide additional energy and cost savings for industry and the country.

  4. Final technical report

    SciTech Connect

    J.A. Rial; J. Lees

    2009-03-31

    As proposed, the main effort in this project is the development of software capable of performing real-time monitoring of micro-seismic activity recorded by an array of sensors deployed around an EGS. The main milestones are defined by the development of software to perform the following tasks: • Real-time micro-earthquake detection and location • Real-time detection of shear-wave splitting • Delayed-time inversion of shear-wave splitting These algorithms, which are discussed in detail in this report, make possible the automatic and real-time monitoring of subsurface fracture systems in geothermal fields from data collected by an array of seismic sensors. Shear wave splitting (SWS) is parameterized in terms of the polarization of the fast shear wave and the time delay between the fast and slow shear waves, which are automatically measured and stored. The measured parameters are then combined with previously measured SWS parameters at the same station and used to invert for the orientation (strike and dip) and intensity of cracks under that station. In addition, this grant allowed the collection of seismic data from several geothermal regions in the US (Coso) and Iceland (Hengill) to use in the development and testing of the software.

  5. The composing process in technical communication

    NASA Technical Reports Server (NTRS)

    Masse, R. E.

    1981-01-01

    The theory and application of the composing process in technical communications is addressed. The composing process of engineers, some implications for composing research for the teaching and research of technical communication, and an interpretation of the processes as creative experience are also discussed. Two areas of technical communications summarized concern: the rhetorical features of technical communications, and the theoretical background for a process-based view, a problem-solving approach to technical writing.

  6. Modern trends in technical crystallization

    NASA Astrophysics Data System (ADS)

    Matz, G.

    1980-04-01

    Interesting and significant developments have occurred in the last decade in both crystallization equipment and in the theory of crystallization process. In the field of technical crystallization new crystallizers have been developed and computer modelling has become important in scaling up and in the achievement of increased performance. The DP-Kristaller developed by Escher-Wyss-Tsukishima, the Brodie purifier, the sieve tray column having dancing balls, the automated multiple crystallization process due to Mützenberg and Saxer and the double belt cooler, all of which represent technical developments, are described in the first section. The second part of the paper reviews computer modelling of the fluidized bed crystallizer, chemical precipitation, flaking and prilling. Finally, there is a brief discussion of the impact of technical crystallization processes on environmental protection.

  7. Final Technical Report

    SciTech Connect

    Peter McIntyre

    2006-08-16

    successive models. Each new model will incorporate a particular design element that we wish to evaluate: first the basic TAMU3 structure, then substitute one pancake using high-performance superconductor (3,000 A/mm2 @ 12 T, 4.2 K), then substitute one pancake using mixed-strand cable, then insert a steel nose to reduce the peak field in the end region of a single-pancake coil. While we are building and testing this succession of TAMU3 models we will de-velop the tooling and evaluate strategies for flaring the ends of the center double-pancake coil needed for.TAMU4. TAMU4 is a full implementation of the design, culminating in 14 Tesla performance. Pending the proposed increase of budget from the present 3-year-flat budget and providing that the tests of each model dipole do not lead to substantial modifications of the de-sign, the time to build and test each succeeding model could be ~9 months. During the present funding year we made a sequence of innovations that have major poten-tial benefit for the commissioning of LHC, upgrade of its luminosity, and its long-term future: • An electrode assembly, suitable for integration within the existing LHC dipoles, ca-pable of killing the electron cloud effect – an effect that threatens to limit the lumi-nosity that could be attained in LHC; • A Nb3Sn structured cable, which makes it possible to design very high gradient quadrupoles for upgrade of the interaction regions of LHC to enhance its luminosity; • A Nb3Sn/NbTi levitated-pole dipole for use in the D1 bends that combine and sepa-rate the beams at the intersection regions. The levitated-pole design uniquely solves the problems of radiation damage and heating from particles swept from the beam. • A hybrid dipole technology, in which inner windings of Bi-2212 are integrated in a Nb3Sn block-coil dipole to push to 24 Tesla, opening the possibility of a future trip-ler upgrade of LHC .

  8. Counting efficiency of whole-body monitoring system using BOMAB and ANSI/IAEA thyroid phantom due to internal contamination of 131I.

    PubMed

    Ghare, V P; Patni, H K; Akar, D K; Rao, D D

    2014-12-01

    In this study, the effect of Indian reference BOttle MAnnikin aBsorber (BOMAB) neck with axial cavity and American National Standards Institute (ANSI)/International Atomic Energy Agency (IAEA) thyroid phantom using pencil sources of (133)Ba ((131)I simulant) on counting efficiency (CE) is seen experimentally in static geometry for whole-body monitoring system comprising 10.16-cm diameter and 7.62-cm-thick NaI(Tl) detector. The CE estimated using the neck part of BOMAB phantom is 50.2% lower in comparison with ANSI phantom. In rest of the studies FLUKA code is used for Monte Carlo simulations using ANSI/IAEA thyroid phantom. The simulation results are validated in static geometries with experimental CE and the differences are within 1.3%. It is observed that CE for pencil source distribution is 3.97% higher for (133)Ba in comparison with CE of (131)I source. Simulated CE for pencil source distribution is 4.7% lower in comparison with uniform source distribution in the volume of thyroid for (131)I. Since the radiation workers are of different physique; overlying tissue thickness (OTT) and neck-to-detector distance play an important role in the calculation of activity in thyroid. The CE decreases with increase in OTT and is found to be 5.5% lower if OTT is changed from 1.1 to 2 cm. Finally, the simulations are carried out to estimate the variation in CE due to variation in the neck-to-detector distance. The CE is 6.2% higher if the neck surface-to-detector distance is decreased from 21.4 to 20.4 cm and it goes on increasing up to 61.9% if the distance is decreased to 15.4 cm. In conclusion, the calibration of whole-body monitoring system for (131)I should be carried out with ANSI/IAEA thyroid phantom, the neck-to-detector distance controlled or the CE corrected for this, and the CE should be corrected for OTT. PMID:24179144

  9. CEEM Final Technical Report

    SciTech Connect

    Bowers, John

    2014-11-26

    concentrating photovoltaic applications thathave substantially higher efficiency than single substrate cells made of elemental semiconductors such as silicon. This task required the development of new cell bonding methods with excellent coupling of both photons and electrons between the sub-cells. To accomplish this, we developed (1) GaInN solar cells with enhanced performance by using quantum-well absorbers and front-surface optical texturing, (2) a hybrid "pillar-array" bond which uses an array of metal pillars for electrical coupling, and (3) a "hybrid moth-eye" optical coating which combines the benefits of nano-imprinted moth-eye coatings and traditional multilayer coatings. The technical effectiveness was assessed by measurement of the photovoltaic efficiency of solar cells made using these techniques; the ultrahigh efficiencies targeted by this work are of compelling economic value for concentrating photovoltaics.

  10. Technical Civilizations in the Galaxy

    NASA Technical Reports Server (NTRS)

    Jones, Harry

    2005-01-01

    Are there other technical civilizations in the galaxy? Past analyses come to different conclusions. Cocconi and Morrison demonstrated in 1959 that interstellar radio communication was possible and Drake conducted the first search for beacons in 1960. The Drake equation estimates the number of galactic civilizations that are transmitting beacons as the product of the rate of star formation in the galaxy, the fraction of stars with planets, their average number of earthlike planets, the fraction with intelligent life and interstellar communication, and the average lifetime of a technical civilization. The Drake model of the galaxy contains many technical civilizations with communication but no interstellar travel. Michael Hart in 1975 strongly challenged this model. Starting with the fact that no extraterrestrials have been observed on Earth, and assuming that interstellar colonization is possible, he concluded that it was very likely that we are the first civilization in our galaxy and that searching or beacons is probably a waste of time and money. The Fermi paradox similarly reasons that if extraterrestrials exist: they should be here, and asks, Where are they? The Hart/Fermi model of the galaxy contains only our civilization and suggests we may colonize the galaxy. A third galactic model is that we are alone but will never develop interstellar travel. The fourth alternate model has many technical civilizations, with interstellar travel and colonization. The possibilities are clear and momentous. Either we are the only technical civilization in the galaxy or there are others. Technical civilizations will colonize the galaxy or not. We have four cosmic conjectures - one or many, colonization or not - but however unlikely they seem based on our limited evidence, one of these four models must be collect.

  11. SVC 2003 Technical Conference Summary

    SciTech Connect

    Martin, Peter M.

    2003-07-01

    The 46th Annual Technical Conference of the Society of Vacuum Coaters was held in San Francisco May 2-8. All the world events apparently did not affect the attendance or the spirit of the attendees. The Conference was a huge success and very well attended. Many feel that it was the best Techcon yet. This year's Conference really raised the bar for the 47th Annual Technical Conference in Dallas next year. Congratulations go out to the program committee, board of directors, education committee, scholarship committee and Management Plus for a job well done. Excellent accommodations were provided by the San Francisco Marriott.

  12. Orbital debris: A technical assessment

    NASA Technical Reports Server (NTRS)

    Gleghorn, George; Asay, James; Atkinson, Dale; Flury, Walter; Johnson, Nicholas; Kessler, Donald; Knowles, Stephen; Rex, Dietrich; Toda, Susumu; Veniaminov, Stanislav

    1995-01-01

    To acquire an unbiased technical assessment of (1) the research needed to better understand the debris environment, (2) the necessity and means of protecting spacecraft against the debris environment, and (3) potential methods of reducing the future debris hazard, NASA asked the National Research Council to form an international committee to examine the orbital debris issue. The committee was asked to draw upon available data and analyses to: characterize the current debris environment, project how this environment might change in the absence of new measures to alleviate debris proliferation, examine ongoing alleviation activities, explore measures to address the problem, and develop recommendations on technical methods to address the problems of debris proliferation.

  13. Procedures for evaluating technical specifications

    SciTech Connect

    Boccio, J.L.; Robinson, R.C.; Samanta, P.K.; Vesely, W.E.

    1987-01-01

    The Procedures for Evaluating Technical Specifications (PETS) Program being conducted by Brookhaven National Laboratory for the Office of Research, US Nuclear Regulatory Commission (NRC), is developing various risk-based approaches for modifying Technical Specifications (TS). This paper highlights the various risk-based issues being addressed by the program and presents examples that exemplify the use of PRA models for modifying TS, primarily elements of the Limiting Condition of Operation (LCOs) and Surveillance Requirements (SRs). PETS approaches to TS modification using more detailed analysis are presented in a companion paper.

  14. Technical Manual: easyCBM. Technical Report #1408

    ERIC Educational Resources Information Center

    Anderson, Daniel; Alonzo, Julie; Tindal, Gerald; Farley, Dan; Irvin, P. Shawn; Lai, Cheng-Fei; Saven, Jessica L.; Wray, Kraig A.

    2014-01-01

    Since the easyCBM© learning system was first published in 2006, over $8 million of federal funding (both from the Office of Special Education Programs and more recently from the Institute of Education Sciences) has been used to develop, study, and refine the assessments available on the system. This Technical Manual summarizes the ongoing research…

  15. SWIFT Intensive Technical Assistance Process. Technical Assistance Brief #1

    ERIC Educational Resources Information Center

    Sailor, Wayne; McCart, Amy; McSheehan, Michael; Mitchiner, Melinda; Quirk, Carol

    2014-01-01

    The national center on Schoolwide Integrated Framework for Transformation (SWIFT Center) is now approaching the halfway point in its first full year of providing intensive technical assistance (TA) to 68 schools in 20 local educational agencies across five states. The purpose of this brief is to provide a thumbnail sketch of how this TA process…

  16. Education and Regional Development: An Irish Case Study.

    ERIC Educational Resources Information Center

    O'Buachalla, Seamus P.

    Among the range of resources in the Mid-West Region of Ireland, higher education is an important, if costly, element. Five university institutions, eight colleges of education, two colleges of technology, and since 1970 nine regional technical colleges offer a higher education. The very large second level student body of the Limerick region was…

  17. Transforming South-South technical support to fight noncommunicable diseases.

    PubMed

    Shakow, Aaron D A; Bukhman, Gene; Adebona, Olumuyiwa; Greene, Jeremy; de Dieu Ngirabega, Jean; Binagwaho, Agnès

    2012-03-01

    At the UN High-Level Meeting on non-communicable diseases (NCD) in September 2011, each member state was challenged to create a multisectoral national policy and plan for the prevention and control of non-communicable disease by 2013. Few low-income countries, however, currently have such plans. Their governments are likely to turn for assistance in drafting and implementation to multilateral agencies and Contract Technical Support Organizations recommended by development partners. Yet because many NCD seen in the lowest-income countries differ significantly from those prevalent elsewhere, existing providers of external technical support may lack the necessary experience to support strategic planning for NCD interventions in these settings. This article reviews currently available mechanisms of technical support for health sector planning. It places them in the broader historical context of post- World War II international development assistance and the more recent campaigns for horizontal "South-South" cooperation and aid effectiveness. It proposes bilateral technical assistance by low income-countries themselves as the natural evolution of development assistance in health. Such programs, it argues, may be able to improve the quality of technical support to low-income countries for strategic planning in the NCD area while directing resources to the regions where they are most needed. PMID:25691166

  18. Final technical report

    SciTech Connect

    Alan Myers; Martha James

    2004-06-08

    This project sought to develop new means of creating variation in the structure of starch that accumulates in maize seeds, through manipulation of the enzyme starch synthase III (SSIII). The central hypothesis was that SSIII is responsible for construction of certain lengths of linear glucan chains within the major starch component amylopectin, and that manipulation of this enzyme could create new varieties of starch that might have novel utilities as a renewable resource. The hypothesis was proven to be true through analysis of the effects of maize du1- mutations, which affect the structure and function of SSIII. SSIII was found to be required for the formation for two distinct groups of chain lengths in maize amylopectin, specifically those containing 7-9 glucose units and those containing 37-55 glucose units. Decrease in the frequency of these chains, as compared to wild type, is accompanied by an increase in chains of 11-15 glucose units. A hypothesis consistent with these data is that one of the other SS isoforms produces chains in the range of 11-15 units, and these are then elongated by SSIII to the range of 37-55 units. In order to try to manipulate the activity of SSIII in novel ways, transgenic maize plants were constructed in which the presumed regulatory part of the protein was detached from the known catalytic region responsible for synthesis of linear glucan chains within starch. Three different transgenes were introduced into maize, each containing different truncated versions of SSIII. Transgenic plants were followed over several generations, and their structure of their starches were analyzed. Novel structures were in fact observed. Specifically, there was a large increase in the frequency of chains containing 9-15 glucose units as compared two wild type maize starch, and a decrease in the frequency of those with 18-30 units. These structures of starch are distinct from those that caused by null mutations that eliminate SSIII, indicated a novel

  19. Technical guidance for siting criteria development

    SciTech Connect

    Aldrich, D.C.; Sprung, J.L.; Alpert, D.J.; Diegert, K.; Ostmeyer, R.M.; Ritchie, L.T.; Strip, D.R.; Johnson, J.D.; Hansen, K.; Robinson, J.

    1982-12-01

    Technical guidance to support the formulation and comparison of possible siting criteria for nuclear power plants has been developed in four areas: (1) consequences of hypothetical severe nuclear-power-plant accidents, (2) characteristics of population distributions about current reactor sites, (3) site availability within the continental United States, and (4) socioeconomic impacts of reactor siting. The impact on consequences of source-term magnitude, meteorology, population distribution, and emergency response have been analyzed. Population distributions about current sites were analyzed to identify statistical characteristics, time trends, and regional differences. A site-availability data bank was constructed for the continential United States. The data bank contains information about population densities, seismicity, topography, water availability, and land-use restrictions. Finally, the socioeconomic impacts of rural-industrialization projects, energy boomtowns, and nuclear power plants were examined to determine their nature, magnitude, and dependence on site demography and remoteness.

  20. Final Technical Report

    SciTech Connect

    Sara Bergan, Executive Director; Brendan Jordan, Program Manager; Subcontractors as listed on the report.

    2007-06-06

    attractive; Although we were able to create available glucose from the AHG fraction in the bio-oil it proved recalcitrant to fermentation by yeast. Although fermentation results were much more positive with wood based bio-oil sugars, ethanol does not appear to be a likely product from grass based bio-oil; and A package of policy recommendations has been developed with roughly 75 key stakeholders from throughout the region that would support the transition to greater development of advanced biofuels and products in the region, as well as a strong role for native grass agriculture to support those industries.

  1. Final Technical Report

    SciTech Connect

    Dr. Asok K. Ray

    2012-05-22

    surfaces. In particular, the region at the boundary of Pu and Am, is widely believed to be the crossover region between d-like itinerant and f-like localized behavior The eventual goal is a complete understanding of the surface chemistry and physics processes of all actinide surfaces, defining the chemistry and physics of such heavy elements. Among the actinides, plutonium, with five 5f electrons in the solid state, is arguably the most complex, fascinating, and enigmatic element known to mankind and has attracted extraordinary scientific and technological interests because of its unique properties, generating a significant body of research in diverse areas, including superconductivity. Pu has, at least, six stable allotropes between room temperature and melting at atmospheric pressure, indicating that the valence electrons can hybridize into a number of complex bonding arrangements. Central and critical questions relate to the electronic structure, localization of the 5f electrons and the magnetism of Pu. For the light-actinides, from Th to Pu, the 5f electrons are believed to be delocalized, hybridizing with the 6d and 7s electrons. For the heavier actinides, Am and beyond, the 5f electrons are localized with the 5f orbitals progressively lower in energy relative to the 6d configuration. Hence, Pu is in a position where the 5f electronic behavior changes from itinerant to localized. As far as magnetism is concerned, a majority of the theoretical calculations continues to claim the existence of magnetism while almost all the experimental results do not find any support for such claims. The second element of interest to us, namely americium, occupies a central position in the actinide series with respect to the involvement of 5f electrons in metallic bonding. It is widely believed that the 5f electrons in Am are localized and that Am undergoes a series of crystallographic phase changes with pressure. Fully-relativistic all electron surface studies of the different phases

  2. Final Technical Report

    SciTech Connect

    Stavropoulos, Pericles

    2004-03-04

    Our research has as its primary objective the development and mechanistic investigation of suitable photocatalytic surfaces, as mediators of energy-efficient heterogeneous oxidation of aliphatic hydrocarbons. Particular emphasis is placed on mixed iron(III)/titanium(IV) oxide semiconductor particulates, featuring low %Fe content, for which a novel synthetic protocol has been developed in this laboratory, relying on sol-gel hydrolysis of high purity iron and titanium isopropoxide precursors, followed by thermal treatment to develop the active anatase phase. This methodology leads to replacement of Ti(IV) ions by Fe(III) sites in the TiO{sub 2} (anatase) lattice, and is contrasted to samples prepared by physical mixing of nanometer-sized a-Fe{sub 2}O{sub 3} (gift from MACH I, Inc.) and TiO{sub 2} (Degussa P-25). Mechanistic understanding of these systems involves multifaceted approaches. Our unique ability to evaluate charge-carrier separation distances, as measured by time-resolved photocharge experiments (TRPC) on instrumentation pioneered by Dr. Levy, permits correlation of this important photophysical property to photocatalytic efficiency and reaction mechanism. A major redesign of our benchmark TRPC apparatus was recently undertaken, which provides for controlled environments during measurement, i.e., vacuum; controlled atmosphere (inert or reactive); and temperature control (-100 to +150 C). Operation of this new TRPC cell necessitated insulation from RF noise, which was achieved by employing a walk-in Faraday enclosure to house the apparatus and supporting instrumentation. Previous work has shown that charge-carrier separation distances (CCSD) for Pt dopped TiO{sub 2} pass through a maximum at very low %Pt content. A similar region of maximum CCSD has now been tentatively identified with samples of a-Fe{sub 2}O{sub 3}/TiO{sub 2} (0-0.02 %Fe) under ambient conditions. Interestingly, the decay portion of the TRPC waveform (charge recombination) exhibits

  3. Status of IAEA CRP on Study of Process-Losses in Separation Processes in Partitioning and Transmutation Systems in View of Minimizing Long-Term Environmental Impacts

    SciTech Connect

    Ahn, J.; Bimova, K.C.; Bychkov, A.; Kormilitsyn, M.; Inoue, T.; Koch, L.; Nagarajan, K.; Nawada, H.; Ye, Y.; Yoo, J.H.

    2007-07-01

    Coordinated Research Project (CRP) was initiated in 2002 by IAEA to enable Member States in developing methodologies for reducing radio-toxic discharge to the environment from nuclear fuel cycle activities and in paving the way for sustainability of nuclear energy. In the past three Research Coordination Meetings (RCM), the following areas of research were examined upon: (1)Basic studies to compare dry partitioning process with aqueous partitioning process; (2)Defining proliferation resistance attributes of partitioning processes; (3) Advanced characterization methods for actinides for measuring the possible material holdup;( 4)Minimization of actinides losses in the waste fraction from the partitioning process;(5)Establishment of separation criteria of partitioning process to minimize environmental impact; and (6)Defining environmental impact associated with partitioning processes. The final TECDOC is currently being prepared to summarize the activities of this CRP. (authors)

  4. Proceedings of the Joint IAEA/CSNI Specialists` Meeting on Fracture Mechanics Verification by Large-Scale Testing held at Pollard Auditorium, Oak Ridge, Tennessee

    SciTech Connect

    Pugh, C.E.; Bass, B.R.; Keeney, J.A.

    1993-10-01

    This report contains 40 papers that were presented at the Joint IAEA/CSNI Specialists` Meeting Fracture Mechanics Verification by Large-Scale Testing held at the Pollard Auditorium, Oak Ridge, Tennessee, during the week of October 26--29, 1992. The papers are printed in the order of their presentation in each session and describe recent large-scale fracture (brittle and/or ductile) experiments, analyses of these experiments, and comparisons between predictions and experimental results. The goal of the meeting was to allow international experts to examine the fracture behavior of various materials and structures under conditions relevant to nuclear reactor components and operating environments. The emphasis was on the ability of various fracture models and analysis methods to predict the wide range of experimental data now available. The individual papers have been cataloged separately.

  5. Marked disequilibrium between 234Th and 230Th of the 238U natural radioactive decay chain in IAEA reference materials n. 312, 313 and 314.

    PubMed

    Colaianni, A; D'Erasmo, G; Pantaleo, A; Schiavulli, L

    2011-02-01

    A new laboratory for the spectroscopy of natural radioactivity with a good energy resolution is presented. It consists of two distinct parts equipped, respectively, the first one with a HpGe γ-ray detector, whose setup has been already completed, and the second one with large area Silicon α-ray detectors and a radiochemical section for thin α-samples preparation, whose setup is yet in progress and will be the argument of a separate work. The γ-ray spectrometer was calibrated by means of IAEA Reference Materials n. 312, 313, 314 and 375. A large difference from the predictions of secular equilibrium emerged between the activities of (234)Th and (230)Th in Materials n. 312, 313 and 314.

  6. Consolidated incineration facility technical support

    SciTech Connect

    Burns, D.; Looper, M.G.

    1993-12-31

    In 1996, the Savannah River Site plans to begin operation of the Consolidated Incineration Facility (CIF) to treat solid and liquid RCRA hazardous and mixed wastes. The Savannah River Technology Center (SRTC) leads an extensive technical support program designed to obtain incinerator and air pollution control equipment performance data to support facility start-up and operation. Key components of this technical support program include recently completed waste burn tests at both EPA`s Incineration Research Facility and at Energy and Environmental Research Corporation`s Solid Waste Incineration Test Facility. The main objectives for these tests were determining the fate of heavy metals, measuring organics destruction and removal efficiencies, and quantifying incinerator offgas particulate loading and size distribution as a function of waste feed characteristics and incineration conditions. In addition to these waste burning tests, the SRTC has recently completed installations of the Offgas Components Test Facility (OCTF), a 1/10 scale CIF offgas system pilot plant. This pilot facility will be used to demonstrate system operability and maintainability, evaluate and optimize equipment and instrument performance, and provide direct CIF start-up support. Technical support programs of this type are needed to resolve technical issues related with treatment and disposal of combustible hazardous, mixed, and low-level radioactive waste. Implementation of this program will minimize facility start-up problems and help insure compliance with all facility performance requirements.

  7. Technical and Adult Education Review.

    ERIC Educational Resources Information Center

    West Virginia State Dept. of Education, Charleston.

    This annual review is a synthesis of the West Virginia Division of Technical and Adult Education Services programs and plans at the conclusion of fiscal year 1991. It begins with letters from the State Superintendent of Schools and Assistant State Superintendent. West Virginia Board of Education mission and goals and the division's programmatic…

  8. [Technical medicine in ancient comedy].

    PubMed

    Rodríguez Alfageme, I

    1995-01-01

    The texts of Greek comedy offer a panoramic vision of the evolution of medicine between the fifth and the third centuries. They provide an excellent way to understand the prejudices and the bases of technical medicine and its relationship with popular medicine. Comedy also shows us a vivid portrait of the physician and his position in Greek society.

  9. technical Hexachlorocyclohexane (t-HCH)

    Integrated Risk Information System (IRIS)

    technical Hexachlorocyclohexane ( t - HCH ) ; CASRN 608 - 73 - 1 Human health assessment information on a chemical substance is included in the IRIS database only after a comprehensive review of toxicity data , as outlined in the IRIS assessment development process . Sections I ( Health Hazard Asses

  10. Gigabit Ethernet: A Technical Assessment.

    ERIC Educational Resources Information Center

    Axner, David

    1997-01-01

    Describes gigabit ethernet for LAN (local area network) technology that will expand ethernet bandwidth. Technical details are discussed, including protocol stacks, optical fiber, deployment strategy for performance improvement, ATM (Asynchronous Transfer Mode), real-time protocol, reserve reservation protocol, and standards. (LRW)

  11. 78 FR 77563 - Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-12-24

    ...) facilitate governance, as corporate credit union directors are familiar with CAMEL at their own natural...'s regulations regarding the rating system for corporate credit unions. The technical amendments... eliminates the use of the Corporate Risk Information System (CRIS) for corporate credit unions and...

  12. Use Made of Technical Libraries.

    ERIC Educational Resources Information Center

    Slater, Margaret; Fisher Pamela

    An analysis of 6300 acts of use in 104 technical libraries in the United Kingdom is reported. This study restricts itself to information search employing documents through the library and concentrates on the following aspects of behavior: (1) the form of the demand made upon the library, (2) the origin of the demand, (3) the kinds of documents…

  13. 77 FR 16425 - Technical Amendments

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-03-21

    ... cause any substantive changes. DATES: This rule is effective March 21, 2012. FOR FURTHER INFORMATION... This rule provides minor technical corrections and will not cause any substantive changes. III... comment, unless the agency for good cause finds that notice and public comment are...

  14. Automotive Technology. Technical Committee Report.

    ERIC Educational Resources Information Center

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in automotive technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…

  15. GROUND WATER TECHNICAL SUPPORT CENTER

    EPA Science Inventory

    EPA's Office of Research and Development operates a Ground Water Technical Support Center (GWTSC). The Center provides support on issues regarding subsurface contamination, contaminant fluxes to other media (e.g., surface water or air), and ecosystem restoration. The GWTSC creat...

  16. Handbook of sensor technical characteristics

    NASA Technical Reports Server (NTRS)

    Tanner, S.

    1982-01-01

    Space and terrestrial applications remote sensor systems are described. Each sensor is presented separately. Information is included on its objectives, description, technical characteristics, data products obtained, data archives location, period of operation, and measurement and potential derived parameters. Each sensor is cross indexed.

  17. Hydrogen Delivery Technical Team Roadmap

    SciTech Connect

    2013-06-01

    The mission of the Hydrogen Delivery Technical Team (HDTT) is to enable the development of hydrogen delivery technologies, which will allow for fuel cell competitiveness with gasoline and hybrid technologies by achieving an as-produced, delivered, and dispensed hydrogen cost of $2-$4 per gallon of gasoline equivalent of hydrogen.

  18. Vocational-Technical Education Today.

    ERIC Educational Resources Information Center

    American Vocational Association, Alexandria, VA.

    Vocational-technical education (VTE) today encompasses a diverse array of programs to equip students with work and life skills. A widening skills gap in the nation's work force, coupled with the fact that only about 20% of the nation's current jobs require a four-year college degree, has made VTE more important than ever before. Research has…

  19. Pharmacy Technician. Technical Committee Report.

    ERIC Educational Resources Information Center

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This report contains the task list for the pharmacy technician program in the state of Idaho. The task list reflects the current trends and skills necessary for an employee to obtain a job in this industry in Idaho, retain a job once hired, and advance in the occupational field. Technical information provided includes program area, program title,…

  20. Autobody Technology. Technical Committee Report.

    ERIC Educational Resources Information Center

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in autobody technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings and are used as…

  1. Foreign Technical-Assistance Programs.

    ERIC Educational Resources Information Center

    King, Maxwell C.

    1990-01-01

    Describes the efforts of the Community Colleges for International Development (CCID) consortium to provide technical assistance in Taiwan, Surinam, the Republic of China, and other countries. Highlights separate projects of CCID members, community college programs with companies and international organizations, and the results of community college…

  2. Electronic Technology. Technical Committee Report.

    ERIC Educational Resources Information Center

    Idaho State Dept. of Education, Boise. Div. of Vocational Education.

    This Technical Committee Report prepared by industry representatives in Idaho lists the skills currently necessary for an employee in that state to obtain a job in electronic technology, retain a job once hired, and advance in that occupational field. (Task lists are grouped according to duty areas generally used in industry settings, and are used…

  3. Technical Quality of Television Programs.

    ERIC Educational Resources Information Center

    Shively, Joe E.

    The Appalachia Educational Laboratory (AEL) developed an instrument for rating the technical quality of television programs. The project was undertaken in conjunction with AEL's Home Oriented Preschool Education (HOPE) program, but sought to produce a generalizable instrument. The final instrument contained a category for judging overall program…

  4. TADS: Technical Assistance Development System.

    ERIC Educational Resources Information Center

    Epting, Rosemary, Ed.

    Described is the Technical Assistance Development System (TADS), a component of the Frank Porter Graham Child Development Center of the University of North Carolina at Chapel Hill which offers support services to preschool demonstration centers for handicapped children in the First Chance Network. Discussed are the four types of services offered:…

  5. The NAEP 1992 Technical Report.

    ERIC Educational Resources Information Center

    Johnson, Eugene G.; And Others

    The 1992 National Assessment of Educational Progress (NAEP) monitored the performance of students in American schools in reading, mathematics, science, and writing. The sample consisted of more than 145,000 public and private school students in grades 4, 8, 11, and 12. This technical report provides details of instrument development, sample…

  6. Atmospheric Research 2011 Technical Highlights

    NASA Technical Reports Server (NTRS)

    2012-01-01

    The 2011 Technical Highlights describes the efforts of all members of Atmospheric Research. Their dedication to advancing Earth Science through conducting research, developing and running models, designing instruments, managing projects, running field campaigns, and numerous other activities, is highlighted in this report.

  7. DOE FINAL TECHNICAL REPORT RP

    SciTech Connect

    RUSS PETERMAN

    2012-01-01

    The City of Georgetown Utility Systems (GUS) patnered with the private sector, the American Public Power Association (APPA) and Southwestern University to design, construct, test and monitor a solar co-generation system directly connected to the GUS electric distribution system. This report consists of the Primary Technical Report and 3 attachments.

  8. Training Manuals and Technical Publications.

    ERIC Educational Resources Information Center

    Army Test and Evaluation Command, Aberdeen Proving Ground, MD.

    The objective of the Materiel Test Procedure is to describe methods for determining the need for adequacy of comprehensiveness, and clarity of training manuals and technical publications (or other pertinent types of literature) relating to the ammunition or ammunition components being tested. (Author)

  9. Surprising Beauty in Technical Photography

    ERIC Educational Resources Information Center

    Davidhazy, Andrew

    2009-01-01

    The Imaging and Photographic Technology area, in which the author teaches, is an applications- and technology-oriented photography program designed to prepare students for work in technical, corporate, industrial, and scientific environments. One day, the author received an e-mail message from an editor who had found his Web site and thought he…

  10. Condensing Algebra for Technical Mathematics.

    ERIC Educational Resources Information Center

    Greenfield, Donald R.

    Twenty Algebra-Packets (A-PAKS) were developed by the investigator for technical education students at the community college level. Each packet contained a statement of rationale, learning objectives, performance activities, performance test, and performance test answer key. The A-PAKS condensed the usual sixteen weeks of algebra into a six-week…

  11. Mechanical Engineering Department technical review

    SciTech Connect

    Carr, R.B.; Abrahamson, L.; Denney, R.M.; Dubois, B.E

    1982-01-01

    Technical achievements and publication abstracts related to research in the following Divisions of Lawrence Livermore Laboratory are reported in this biannual review: Nuclear Fuel Engineering; Nuclear Explosives Engineering; Weapons Engineering; Energy Systems Engineering; Engineering Sciences; Magnetic Fusion Engineering; and Material Fabrication. (LCL)

  12. Defense Technical Information Center thesaurus

    SciTech Connect

    Dickert, J.H.

    1996-10-01

    This DTIC Thesaurus provides a basic multidisciplinary subject term vocabulary used by DTIC to index and retrieve scientific and technical information from its various data bases and to aid DTIC`s users in their information storage and retrieval operations. It includes an alphabetical posting term display, a hierarchy display, and a Keywork Out of Context (KWOC) display.

  13. Career Technical Education Pathways Initiative

    ERIC Educational Resources Information Center

    California Community Colleges, Chancellor's Office, 2013

    2013-01-01

    California's education system--the largest in the United States--is an essential resource for ensuring strong economic growth in the state. The Career Technical Education Pathways Initiative (referred to as the Initiative in this report), which became law in 2005, brings together community colleges, K-12 school districts, employers, organized…

  14. Final Technical Report

    SciTech Connect

    Stuart B. Levy, M.D.

    2008-07-07

    organization (10). We have called these sequences ''cryptic'' because they were not detected during annotation of the P. fluorescens PfO-1 genome sequence. We have detected open reading frames for each of the 10 cryptic genes. To test the importance of soil-induced genes in survival or persistence, we constructed mutations in three iiv genes, and tested them in soil growth assays. Relative to the wildtype, these mutants had no growth defect in laboratory culture, but the mutations did increase the time needed to establish the population in sterile soil (9). These data provide support for our hypothesis that IVET will reveal genes involved in environmental (soil) survival. The gene iiv2 which has a colonization defect in sterile soil, has no similarity to known sequences and thus is a novel sequence with a role in soil colonization. In live soil microcosms, wildtype and iiv2 mutant bacteria were inoculated in a central ''core''. Persistence within the core and spread from the core were quantified, using a specific competitive PCR (6) approach which we developed and optimized. The Hv2 mutant showed reduced persistence within the microcosm core, and was impaired in its ability to spread out and colonize soil. These data further support the IVET approach for finding previously uncharacterized genes that are critical to fitness in soil. To directly confirm transcription, we have carried out RT-PCR analysis on cryptic iiv genes, and the sequences on the opposite DNA strand. Primers that permitted the amplification of a region internal to both cryptic and opposite gene were used. Reverse transcription used a single gene-specific primer, so that transcripts from both strands to be detected separately The RT-PCR experiments have confirmed expression of eight cryptic genes, and the genes encoded on the opposite strand The relative cryptic, opposite gene expression level varies between loci. For example, iiv14 is expressed more than its opposite gene, while both iiv5 and iiv23 appear to

  15. Final Technical Report

    SciTech Connect

    Stenzel, Reiner; Urrutia, J. Manuel

    2009-09-08

    observed. A loop antenna creates a dipole field which is frozen into the plasma for a half cycle and becomes the background field for the wave launched by the next half cycle. The field topology consists of field-reversed dipoles of decreasing strength with distance. The propagation region depends on field amplitude but not on the skin depth. Our research has been published in 13 scientific papers.

  16. FINAL TECHNICAL REPORT

    SciTech Connect

    Loren F. Goodrich

    2011-05-31

    to meet the aggressive performance goals. The latest high-performance Nb{sub 3}Sn wires are being designed with higher current densities, larger effective filament diameter, less Cu stabilizer, and, in some cases, larger wire diameters than ever before. In addition, some of the conductor designs and heat treatments cause the residual resistivity ratio (RRR, ratio of room temperature resistivity to the resistivity at 20 K) of the stabilizer to be less than 20. These parameters are pushing the conductors towards less intrinsic stability, into a region we call marginally stable. These parameters also create a whole series of challenges for routine I{sub c} testing on short-samples, even when tested with the sample immersed in liquid helium. High-current, variable-temperature I{sub c} measurements are even more difficult than those made in liquid helium because the sample is only cooled by flowing helium gas. Providing accurate I{sub c} results under these conditions requires a complex system that provide adequate cooling as well as uniform sample temperature. We have been make variable-temperature measurements for about 15 years, but we started to design the first high-current (at least 500 A), variable-temperature, variable-strain apparatus in late 2006. Our first critical-current measurements as a function of strain, temperature, and magnetic field, I{sub c}(B,T,{var_epsilon}), in a new single, unified apparatus (full matrix characterization) were made in the summer of 2008. This is the only such facility in the U.S. and it has some unique components that are not duplicated anywhere in the world. The compounding of all three variables (H, T, {var_epsilon}) makes an already labor and time intensive characterization very formidable; however, the results cannot be generated any other way and are needed to answer key questions about strain and temperature safety margins and about the reliability of using scaling laws based on small data sets to predict performance. In the

  17. Regional governance: strategies and disputes in health region management

    PubMed Central

    dos Santos, Adriano Maia; Giovanella, Ligia

    2014-01-01

    OBJECTIVE To analyze the regional governance of the health systemin relation to management strategies and disputes. METHODOLOGICAL PROCEDURES A qualitative study with health managers from 19 municipalities in the health region of Bahia, Northeastern Brazil. Data were drawn from 17 semi-structured interviews of state, regional, and municipal health policymakers and managers; a focus group; observations of the regional interagency committee; and documents in 2012. The political-institutional and the organizational components were analyzed in the light of dialectical hermeneutics. RESULTS The regional interagency committee is the chief regional governance strategy/component and functions as a strategic tool for strengthening governance. It brings together a diversity of members responsible for decision making in the healthcare territories, who need to negotiate the allocation of funding and the distribution of facilities for common use in the region. The high turnover of health secretaries, their lack of autonomy from the local executive decisions, inadequate technical training to exercise their function, and the influence of party politics on decision making stand as obstacles to the regional interagency committee’s permeability to social demands. Funding is insufficient to enable the fulfillment of the officially integrated agreed-upon program or to boost public supply by the system, requiring that public managers procure services from the private market at values higher than the national health service price schedule (Brazilian Unified Health System Table). The study determined that “facilitators” under contract to health departments accelerated access to specialized (diagnostic, therapeutic and/or surgical) services in other municipalities by direct payment to physicians for procedure costs already covered by the Brazilian Unified Health System. CONCLUSIONS The characteristics identified a regionalized system with a conflictive pattern of governance and

  18. Final Scientific/Technical Report

    SciTech Connect

    Brown, R. C.; McCarley, T. M.

    2006-05-04

    . Platform teams organize faculty and students for cross-disciplinary, systems-oriented research and collaborative learning. To date, nine platforms have been developed, although these will most likely be reorganized into a smaller number of broader topics. In the spring of 2004, BRT faculty initiated a regional partnership and collaborative learning program with colleagues at the University of Minnesota, Kansas State University, and South Dakota State University to develop distance education courses in biorenewable resources and technology. As a fledgling graduate program, the BRT graduate program didn’t have the breadth of resources to offer a large number of courses in biorenewables. Other schools faced a similar problem. The academic consortium as first conceived would allow students from the member schools to enroll in biorenewables courses from any of the participating schools, which would assure the necessary enrollment numbers to offer specialized course work. Since its inception, the collaborative curriculum partnership has expanded to include Louisiana State University and the University of Wisconsin. A second international curriculum development campaign was also initiated in the spring of 2004. In particular, several BRT faculty teamed with colleagues at the University of Arkansas, University of Washington, University of Gent (Belgium), National Polytechnic Institute of Toulouse (France), and Technical University of Graz (Austria) to develop an EU-US exchange program in higher education and vocational education/training (entitled “Renewable Resources and Clean Technology”).

  19. Appalachian Regional Commission Annual Report, 2000.

    ERIC Educational Resources Information Center

    Appalachian Regional Commission, Washington, DC.

    In 2000, the Appalachian Regional Commission (ARC), in cooperation with local development districts, nonprofit organizations, and many small municipalities, expanded programs to help Appalachia's distressed counties become economically competitive. The effort calls for increased funding for technical assistance and capacity building in distressed…

  20. SOAR: Showcasing Outstanding Achievements in Region 1.

    ERIC Educational Resources Information Center

    Florida State Dept. of Education, Tallahassee. Div. of Workforce Development.

    This document showcases 129 exemplary workforce development-related programs at elementary schools, middle schools, high schools, adult centers, school districts, vocational-technical centers, and two- and four-year colleges in 15 counties in Florida's western panhandle region. The 15 counties are: (1) Bay; (2) Calhoun; (3) Escambia; (4) Franklin;…

  1. Recreational technical diving part 2: decompression from deep technical dives.

    PubMed

    Doolette, David J; Mitchell, Simon J

    2013-06-01

    Technical divers perform deep, mixed-gas 'bounce' dives, which are inherently inefficient because even a short duration at the target depth results in lengthy decompression. Technical divers use decompression schedules generated from modified versions of decompression algorithms originally developed for other types of diving. Many modifications ostensibly produce shorter and/or safer decompression, but have generally been driven by anecdote. Scientific evidence relevant to many of these modifications exists, but is often difficult to locate. This review assembles and examines scientific evidence relevant to technical diving decompression practice. There is a widespread belief that bubble algorithms, which redistribute decompression in favour of deeper decompression stops, are more efficient than traditional, shallow-stop, gas-content algorithms, but recent laboratory data support the opposite view. It seems unlikely that switches from helium- to nitrogen-based breathing gases during ascent will accelerate decompression from typical technical bounce dives. However, there is evidence for a higher prevalence of neurological decompression sickness (DCS) after dives conducted breathing only helium-oxygen than those with nitrogen-oxygen. There is also weak evidence suggesting less neurological DCS occurs if helium-oxygen breathing gas is switched to air during decompression than if no switch is made. On the other hand, helium-to-nitrogen breathing gas switches are implicated in the development of inner-ear DCS arising during decompression. Inner-ear DCS is difficult to predict, but strategies to minimize the risk include adequate initial decompression, delaying helium-to-nitrogen switches until relatively shallow, and the use of the maximum safe fraction of inspired oxygen during decompression.

  2. Northeast Regional Biomass Energy Program

    SciTech Connect

    O'Connell, R.A.

    1992-04-01

    The Northeast Regional Biomass Program (NRBP) is entering its ninth year of operation. The management and the objectives have virtually remained unchanged and are stated as follows. The program conducted by NRBP has three basic features: (1) a state grant component that provides funds (with a 50 percent matching requirement) to each of the states in the region to strengthen and integrate the work of state agencies involved in biomass energy; (2) a series of technical reports and studies in areas that have been identified as being of critical importance to the development of biomass energy in the region; and (3) a continuous long range planning component with heavy private sector involvement that helps to identify activities necessary to spur greater development and use of biomass energy in the Northeast.

  3. Hydrogen and Fuel Cell Technical Advisory Committee

    SciTech Connect

    2012-03-21

    The Hydrogen and Fuel Cell Technical Advisory Committee (HTAC) was established under Section 807 of the Energy Policy Act of 2005 to provide technical and programmatic advice to the Energy Secretary on DOE's hydrogen research, development, and demonstration efforts.

  4. Assessing and Improving Reading in Technical Education.

    ERIC Educational Resources Information Center

    Ediger, Marlow

    2001-01-01

    All students must read well enough to be able to understand content that is necessary in the workplace. Technical education teachers must ascertain where each student is achieving in reading and provide sequential experiences in reading technical materials. (JOW)

  5. Improving Technical Instruction Using Personality Styles.

    ERIC Educational Resources Information Center

    Tomal, Daniel R.

    2003-01-01

    Incorporating personality styles into technical instruction can enhance student learning. Four personality styles based on Jung--intuitor, feeler, thinker, and doer--have implications for individualizing technical instruction. (JOW)

  6. Technical Writing: Applications in the Classroom.

    ERIC Educational Resources Information Center

    Weber, Dean

    1992-01-01

    Defines technical writing, the importance of audience awareness, and the fog index. Analyzes examples of technical writing and tips on developing skills such as writing instructions and assembling a model. Offers assignments and projects as well as class activities. (PRA)

  7. Current Trends and Issues in Technical and Vocational Education in Asia and the Pacific.

    ERIC Educational Resources Information Center

    Qureshi, M. A.

    1996-01-01

    In most countries of the Asia-Pacific region, technical and vocational education and training (TVET) are considered essential to economic development. As a result of growing awareness of the need to adapt TVET to meet the rapidly changing national, regional, and global economic requirements, TVET is in a period of transition and reorientation…

  8. Exploration Medical System Technical Development

    NASA Technical Reports Server (NTRS)

    McGuire, K.; Middour, C.; Cerro, J.; Burba, T.; Hanson, A.; Reilly, J.; Mindock, J.

    2017-01-01

    The Exploration Medical Capability (ExMC) Element systems engineering goals include defining the technical system needed to implement exploration medical capabilities for Mars. This past year, scenarios captured in the medical system concept of operations laid the foundation for systems engineering technical development work. The systems engineering team analyzed scenario content to identify interactions between the medical system, crewmembers, the exploration vehicle, and the ground system. This enabled the definition of functions the medical system must provide and interfaces to crewmembers and other systems. These analyses additionally lead to the development of a conceptual medical system architecture. The work supports the ExMC community-wide understanding of the functional exploration needs to be met by the medical system, the subsequent development of medical system requirements, and the system verification and validation approach utilizing terrestrial analogs and precursor exploration missions.

  9. Internal dosimetry technical basis manual

    SciTech Connect

    Not Available

    1990-12-20

    The internal dosimetry program at the Savannah River Site (SRS) consists of radiation protection programs and activities used to detect and evaluate intakes of radioactive material by radiation workers. Examples of such programs are: air monitoring; surface contamination monitoring; personal contamination surveys; radiobioassay; and dose assessment. The objectives of the internal dosimetry program are to demonstrate that the workplace is under control and that workers are not being exposed to radioactive material, and to detect and assess inadvertent intakes in the workplace. The Savannah River Site Internal Dosimetry Technical Basis Manual (TBM) is intended to provide a technical and philosophical discussion of the radiobioassay and dose assessment aspects of the internal dosimetry program. Detailed information on air, surface, and personal contamination surveillance programs is not given in this manual except for how these programs interface with routine and special bioassay programs.

  10. A Hybrid Method for Determining Technical Vocabulary

    ERIC Educational Resources Information Center

    Kwary, Deny Arnos

    2011-01-01

    Knowledge of technical vocabulary has become increasingly important over the last few decades along with the advances in various subject disciplines. ESP teachers and book authors need to know what words are considered technical vocabulary when creating ESP learning materials. LSP lexicographers need to know how to determine technical vocabulary…

  11. Head Start Impact Study. Technical Report

    ERIC Educational Resources Information Center

    Puma, Michael; Bell, Stephen; Cook, Ronna; Heid, Camilla; Shapiro, Gary; Broene, Pam; Jenkins, Frank; Fletcher, Philip; Quinn, Liz; Friedman, Janet; Ciarico, Janet; Rohacek, Monica; Adams, Gina; Spier, Elizabeth

    2010-01-01

    This Technical Report is designed to provide technical detail to support the analysis and findings presented in the "Head Start Impact Study Final Report" (U.S. Department of Health and Human Services, January 2010). Chapter 1 provides an overview of the Head Start Impact Study and its findings. Chapter 2 provides technical information on the…

  12. Speech and Technical Writing: A Combined Approach.

    ERIC Educational Resources Information Center

    Desjardins, Linda A.

    Since engineering graduates and other technical students are frequently expected to document their projects as well as present such material orally, a Speech and Technical Writing course was designed at a New Hampshire college to prepare students for both technical writing tasks and oral presentations of their material. The course provides an…

  13. 10 CFR 905.40 - Technical assistance.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Technical assistance. 905.40 Section 905.40 Energy DEPARTMENT OF ENERGY ENERGY PLANNING AND MANAGEMENT PROGRAM Energy Services § 905.40 Technical assistance. Western shall establish a program that provides technical assistance to customers to conduct...

  14. German Academic Programs in Technical Communication

    ERIC Educational Resources Information Center

    Smith, Herb J.

    2003-01-01

    While research in international technical communication has flourished during the last 10 years, there has been little published on technical communication programs outside the United States. This article addresses this need by describing 12 representative academic technical communication programs in Germany, including Germany's first master's…

  15. Technical Education Demonstration Program. Final Report.

    ERIC Educational Resources Information Center

    Milwaukee Area Technical Coll., WI.

    The Technical Education Demonstration Program helped students aged 16-25 traditionally excluded from technical careers because of lack of training to attain academic and technical skills. Eighty-one teachers attended four-credit summer courses; 500 teachers, counselors, and administrators attended seminars. A demonstration model interfacing…

  16. 47 CFR 18.207 - Technical report.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 47 Telecommunication 1 2013-10-01 2013-10-01 false Technical report. 18.207 Section 18.207 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical...

  17. 47 CFR 18.207 - Technical report.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 47 Telecommunication 1 2014-10-01 2014-10-01 false Technical report. 18.207 Section 18.207 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL INDUSTRIAL, SCIENTIFIC, AND MEDICAL EQUIPMENT Applications and Authorizations § 18.207 Technical report. When required by the Commission a technical...

  18. 22 CFR 120.10 - Technical data.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... 22 Foreign Relations 1 2013-04-01 2013-04-01 false Technical data. 120.10 Section 120.10 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.10 Technical data. (a) Technical data means, for purposes of this subchapter: (1) Information, other...

  19. 22 CFR 120.10 - Technical data.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Technical data. 120.10 Section 120.10 Foreign Relations DEPARTMENT OF STATE INTERNATIONAL TRAFFIC IN ARMS REGULATIONS PURPOSE AND DEFINITIONS § 120.10 Technical data. (a) Technical data means, for purposes of this subchapter: (1) Information, other...

  20. 48 CFR 212.211 - Technical data.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Technical data. 212.211 Section 212.211 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS SYSTEM, DEPARTMENT... Acquisition of Commercial Items 212.211 Technical data. The DoD policy for acquiring technical data...