Graphical Technique to Support the Teaching/Learning Process of Software Process Reference Models

NASA Astrophysics Data System (ADS)

Espinosa-Curiel, Ismael Edrein; Rodríguez-Jacobo, Josefina; Fernández-Zepeda, José Alberto

In this paper, we propose a set of diagrams to visualize software process reference models (PRM). The diagrams, called dimods, are the combination of some visual and process modeling techniques such as rich pictures, mind maps, IDEF and RAD diagrams. We show the use of this technique by designing a set of dimods for the Mexican Software Industry Process Model (MoProSoft). Additionally, we perform an evaluation of the usefulness of dimods. The result of the evaluation shows that dimods may be a support tool that facilitates the understanding, memorization, and learning of software PRMs in both, software development organizations and universities. The results also show that dimods may have advantages over the traditional description methods for these types of models.

Adherence to a Mediterranean-like dietary pattern in children from eight European countries. The IDEFICS study.

PubMed

Tognon, G; Moreno, L A; Mouratidou, T; Veidebaum, T; Molnár, D; Russo, P; Siani, A; Akhandaf, Y; Krogh, V; Tornaritis, M; Börnhorst, C; Hebestreit, A; Pigeot, I; Lissner, L

2014-09-01

Despite documented benefits of a Mediterranean-like dietary pattern, there is a lack of knowledge about how children from different European countries compare with each other in relation to the adherence to this pattern. In response to this need, we calculated the Mediterranean diet score (MDS) in 2-9-year-old children from the Identification and prevention of dietary- and lifestyle-induced health effects in children and infants (IDEFICS) eight-country study. Using 24 h dietary recall data obtained during the IDEFICS study (n=7940), an MDS score was calculated based on the age- and sex-specific population median intakes of six food groups (vegetables and legumes, fruit and nuts, cereal grains and potatoes, meat products and dairy products) and the ratio of unsaturated to saturated fats. For fish and seafood, which was consumed by 10% of the population, one point was given to consumers. The percentages of children with high MDS levels (>3) were calculated and stratified by sex, age and by having at least one migrant parent or both native parents. Demographic (sex and age) and socioeconomic characteristics (parental education and income) of children showing high (>3) vs low (⩽3) MDS levels were examined. The highest prevalence of children with MDS>3 was found among the Italian pre-school boys (55.9%) and the lowest among the Spanish school-aged girls (26.0%). Higher adherence to a Mediterranean-like dietary pattern was not associated with living in a Mediterranean country or in a highly educated or high-income family, although with some exceptions. Differences in adherence between boys and girls or age groups varied between countries without any general pattern. With the exception of Italian pre-schoolers, similar adherence levels to a Mediterranean-like dietary pattern have been observed among European children.

Analysis of the association of leptin and adiponectin concentrations with metabolic syndrome in children: Results from the IDEFICS study.

PubMed

Nappo, A; González-Gil, E M; Ahrens, W; Bammann, K; Michels, N; Moreno, L A; Kourides, Y; Iacoviello, L; Mårild, S; Fraterman, A; Molnàr, D; Veidebaum, T; Siani, A; Russo, P

2017-06-01

Adipokines may play a role in the pathogenesis of the metabolic syndrome (MetS) in children. We aimed to evaluate the association of leptin, adiponectin, and its ratio (L/A ratio) with the metabolic syndrome (MetS) in a subsample of the IDEFICS (Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS) cohort. Leptin, adiponectin and MetS parameters were measured in a subsample of 1253 children (3-9.9 years) participating to the IDEFICS study, grouped as: Non-OW (underweight/normal weight) and OW/Ob (overweight/obese). MetS was defined using the sex- and age-specific cut-offs based on the distribution of MetS components in the IDEFICS cohort. The prevalence of the MetS among OW/Ob was 24.8% and 27.1% in boys and girls respectively, whereas ≤2% among Non-OW. OW/Ob had significantly higher leptin and L/A ratio as compared to Non-OW. Significantly higher leptin was found in OW/Ob with MetS as compared with OW/Ob without MetS. Significantly lower adiponectin was observed only in OW/Ob girls as compared to Non-OW. A 1SD increase in leptin and L/A ratio z-scores or a 1SD decrease in adiponectin z-score were significantly associated with higher risk of MetS. After adjustment for BMI or body fat mass (BFM) the association remained significant only for leptin. We showed that in European children, higher leptin concentration is associated with MetS, even after adjusting for BMI or BFM, confirming an early role of leptin in MetS, while the association of adiponectin with MetS seems be mediated by body fat in this age range. Copyright © 2017 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.

Parents' evaluation of the IDEFICS intervention: an analysis focussing on socio-economic factors, child's weight status and intervention exposure.

PubMed

Nicholls, S G; Pohlabeln, H; De Bourdeaudhuij, I; Chadjigeorgiou, C; Gwozdz, W; Hebestreit, A; Lauria, F; Lissner, L; Molnár, D; Santaliestra-Pasías, A M; Veidebaum, T; Williams, G

2015-12-01

From April 2008 to August 2010 the Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS (IDEFICS) intervention aimed to encourage healthier diets, higher physical activity levels and lower stress levels among European children and their families. While the intervention was intended to improve children's health, we also wished to assess whether there were unwelcome aspects or negative side-effects. Therefore all parents of children who participated in the IDEFICS intervention were asked for their views on different aspects of the intervention. A total of 10,016 parents of children who participated in the IDEFICS survey and who were involved in the intervention were invited to complete a questionnaire on positive and negative impacts of the intervention. Responses to each of the statements were coded on a four point Likert-type scale. Demographic data were collected as part of the baseline (T0 ) and first follow-up (T1 ) surveys; intervention exposure data was also collected in the T1 follow-up survey. Anthropometric data was collected in the same surveys, and child's weight status was assessed according to Cole and Lobstein. After initial review of the univariate statistics multilevel logistic regression was conducted to analyse the influence of socio-economic factors, child's weight status and intervention exposure on parental responses. In total 4,997 responses were received. Approval rates were high, and few parents reported negative effects. Parents who reported higher levels of exposure to the intervention were more likely to approve of it and were also no more likely to notice negative aspects. Less-educated and lower income parents were more likely to report that the intervention would make a lasting positive difference, but also more likely to report that the intervention had had negative effects. Parents of overweight and obese children were more likely to report negative effects - above all, that 'the

Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

PubMed

Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

Understanding and preventing childhood obesity and related disorders--IDEFICS: a European multilevel epidemiological approach.

PubMed

Ahrens, W; Bammann, K; de Henauw, S; Halford, J; Palou, A; Pigeot, I; Siani, A; Sjöström, M

2006-05-01

The environment of children has drastically changed in Europe during the last decades as reflected in unhealthy dietary habits and sedentary lifestyle. Nutrition obviously plays a part in the development of overweight in childhood. However, dietary factors and physical activity are also involved in the development of metabolic syndrome, type II diabetes, cardiovascular diseases, osteoporosis, and postural deformities like scoliosis, effects related in part to excessive weight gain. To stop the resulting epidemic of diet- and lifestyle-induced morbidity, efficient evidence-based approaches are needed. These issues are the focus of IDEFICS (Identification and prevention of dietary- and lifestyle-induced health effects in children and infants), a five-year project proposed under the sixth EU framework. The IDEFICS consortium comprises 25 research centres and SMEs across Europe. The planned prospective study will identify risk profile inventories for children susceptible to any of these disorders with emphasis on obesity and its co-morbid conditions. Genetic and non-genetic factors, psychosocial factors and social settings will be considered. The project will devise tailored prevention strategies that are effective, easy to implement and that account for the needs of different social groups. Population-based studies will investigate the impact of sensory perception and provide results concerning internal and external triggers of food choices and children's consumer behaviour. The ethical implications of a "right not to know" of genetic factors will be addressed. We will propose knowledge-based guidelines on dietary and lifestyle activities for health promotion and disease prevention in children for health professionals, stakeholders and consumers.

IDEF3 Formalization Report

DTIC Science & Technology

1991-10-01

SUBJECT TERMS 15. NUMBER OF PAGES engineering management information systems method formalization 60 information engineering process modeling 16 PRICE...CODE information systems requirements definition methods knowlede acquisition methods systems engineering 17. SECURITY CLASSIFICATION ji. SECURITY... Management , Inc., Santa Monica, California. CORYNEN, G. C., 1975, A Mathematical Theory of Modeling and Simula- tion. Ph.D. Dissertation, Department

Developing the IDEFICS Community-Based Intervention Program to Enhance Eating Behaviors in 2- to 8-Year-Old Children: Findings from Focus Groups with Children and Parents

ERIC Educational Resources Information Center

Haerens, L.; De Bourdeaudhuij, I.; Barba, G.; Eiben, G.; Fernandez, J.; Hebestreit, A.; Kovacs, E.; Lasn, H.; Regber, S.; Shiakou, M.; De Henauw, S.

2009-01-01

One purpose of "identification and prevention of dietary- and lifestyle-induced health effects in children and infants" (IDEFICS) is to implement a standardized community-based multi-component healthy eating intervention for younger children in eight different countries. The present study describes important influencing factors for dietary…

Efficacy of neck circumference to identify metabolic syndrome in 3-10 year-old European children: Results from IDEFICS study.

PubMed

Formisano, A; Bammann, K; Fraterman, A; Hadjigeorgiou, C; Herrmann, D; Iacoviello, L; Marild, S; Moreno, L A; Nagy, P; Van Den Bussche, K; Veidebaum, T; Lauria, F; Siani, A

2016-06-01

Several studies demonstrated that larger neck circumference (NC) in children and adolescents may help to identify obesity and cardio-metabolic abnormalities. We aimed to evaluate the correlation between NC and metabolic syndrome (MetS) risk factors and to determine the utility of this anthropometric index to identify MetS in European children. The present cross-sectional analysis includes 15,673 children (3-10 years) participating in the IDEFICS study. A continuous MetS (cMetS) score was calculated summing age and sex standardized z-scores of specific MetS risk factors. Receiver Operating Characteristic analysis, stratified by one-year age groups, was used to determine the ability of NC to identify children with unfavorable metabolic profile, corresponding to cMetS score ≥ 90th percentile. The areas under the curve values for NC associated with cMetS score values ≥ 90th percentile were significantly greater in girls than in boys (p < 0.001), except for 5 < 6 years group. For boys, optimal NC cut-off values ranged from 26.2 cm for the lowest age group (3 < 4 years), up to 30.9 cm for the highest age group (9 < 10 years). In girls, corresponding values varied from 24.9 cm to 29.6 cm. The study demonstrated the efficacy of NC in identifying European children with an unfavorable metabolic profile. Copyright © 2016 The Italian Society of Diabetology, the Italian Society for the Study of Atherosclerosis, the Italian Society of Human Nutrition, and the Department of Clinical Medicine and Surgery, Federico II University. Published by Elsevier B.V. All rights reserved.

AOIPS 3 user's guide. Volume 2: Program descriptions

NASA Technical Reports Server (NTRS)

Schotz, Steve S.; Piper, Thomas S.; Negri, Andrew J.

1990-01-01

The Atmospheric and Oceanographic Information Processing System (AOIPS) 3 is the version of the AOIPS software as of April 1989. The AOIPS software was developed jointly by the Goddard Space Flight Center and General Sciences Corporation. A detailed description of very AOIPS program is presented. It is intended to serve as a reference for such items as program functionality, program operational instructions, and input/output variable descriptions. Program descriptions are derived from the on-line help information. Each program description is divided into two sections. The functional description section describes the purpose of the program and contains any pertinent operational information. The program description sections lists the program variables as they appear on-line, and describes them in detail.

Reproducibility of food consumption frequencies derived from the Children's Eating Habits Questionnaire used in the IDEFICS study.

PubMed

Lanfer, A; Hebestreit, A; Ahrens, W; Krogh, V; Sieri, S; Lissner, L; Eiben, G; Siani, A; Huybrechts, I; Loit, H-M; Papoutsou, S; Kovács, E; Pala, V

2011-04-01

To investigate the reproducibility of food consumption frequencies derived from the food frequency section of the Children's Eating Habits Questionnaire (CEHQ-FFQ) that was developed and used in the IDEFICS (Identification and prevention of dietary- and lifestyle-induced health effects in children and infants) project to assess food habits in 2- to 9-year-old European children. From a subsample of 258 children who participated in the IDEFICS baseline examination, parental questionnaires of the CEHQ were collected twice to assess reproducibility of questionnaire results from 0 to 354 days after the first examination. Weighted Cohen's kappa coefficients (κ) and Spearman's correlation coefficients (r) were calculated to assess agreement between the first and second questionnaires for each food item of the CEHQ-FFQ. Stratification was performed for sex, age group, geographical region and length of period between the first and second administrations. Fisher's Z transformation was applied to test correlation coefficients for significant differences between strata. For all food items analysed, weighted Cohen's kappa coefficients (κ) and Spearman's correlation coefficients (r) were significant and positive (P<0.001). Reproducibility was lowest for diet soft drinks (κ=0.23, r=0.32) and highest for sweetened milk (κ=0.68, r=0.76). Correlation coefficients were comparable to those of previous studies on FFQ reproducibility in children and adults. Stratification did not reveal systematic differences in reproducibility by sex and age group. Spearman's correlation coefficients differed significantly between northern and southern European countries for 10 food items. In nine of them, the lower respective coefficient was still high enough to conclude acceptable reproducibility. As expected, longer time (>128 days) between the first and second administrations resulted in a generally lower, yet still acceptable, reproducibility. Results indicate that the CEHQ-FFQ gives

Effects of a community-oriented obesity prevention programme on indicators of body fatness in preschool and primary school children. Main results from the IDEFICS study.

PubMed

De Henauw, S; Huybrechts, I; De Bourdeaudhuij, I; Bammann, K; Barba, G; Lissner, L; Mårild, S; Molnár, D; Moreno, L A; Pigeot, I; Tornaritis, M; Veidebaum, T; Verbestel, V; Ahrens, W

2015-12-01

Childhood obesity is a major public health concern but evidence-based approaches to tackle this epidemic sustainably are still lacking. The Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS (IDEFICS) study investigated the aetiology of childhood obesity and developed a primary prevention programme. Here, we report on the effects of the IDEFICS intervention on indicators of body fatness. The intervention modules addressed the community, school and parental level, focusing on diet, physical activity and stress-related lifestyle factors. A cohort of 16,228 children aged 2-9.9 years - about 2000 per country - was equally divided over intervention and control regions. (Participating countries were Sweden, Germany, Estonia, Hungary, Cyprus, Italy, Spain and Belgium.) We compared the prevalence of overweight/obesity and mean values of body mass index z-score, per cent body fat and waist-to-height ratio over 2 years of follow-up. Mixed models adjusting for age and socioeconomic status of the parents and with an additional random effect for country accounted for the clustered study design. The prevalence of overweight and obesity increased in both the intervention and control group from 18.0% at baseline to 22.9% at follow-up in the control group and from 19.0% to 23.6% in the intervention group. The difference in changes between control and intervention was not statistically significant. For the cohort as a whole, the changes in indicators of body fatness did not show any clinically relevant differences between the intervention and control groups. Changes in favour of intervention treatment in some indicators were counterbalanced by changes in favour of the control group in some other indicators. Over the 2-year-observation period, the IDEFICS primary prevention programme for childhood obesity has not been successful in reducing the prevalence of overweight and obesity nor in improving indicators of body fatness in

Counter Unmanned Aerial System Decision-Aid Logic Process (C-UAS DALP)

DTIC Science & Technology

decision -aid or logic process that bridges the middle elements of the kill... of use, location, general logic process , and reference mission. This is the framework for the IDEF0 functional architecture diagrams, decision -aid diagrams, logic process , and modeling and simulation....chain between detection to countermeasure response. This capstone project creates the logic for a decision process that transitions from the

A Domain Description Language for Data Processing

NASA Technical Reports Server (NTRS)

Golden, Keith

2003-01-01

We discuss an application of planning to data processing, a planning problem which poses unique challenges for domain description languages. We discuss these challenges and why the current PDDL standard does not meet them. We discuss DPADL (Data Processing Action Description Language), a language for describing planning domains that involve data processing. DPADL is a declarative, object-oriented language that supports constraints and embedded Java code, object creation and copying, explicit inputs and outputs for actions, and metadata descriptions of existing and desired data. DPADL is supported by the IMAGEbot system, which we are using to provide automation for an ecological forecasting application. We compare DPADL to PDDL and discuss changes that could be made to PDDL to make it more suitable for representing planning domains that involve data processing actions.

Physical fitness reference standards in European children: the IDEFICS study.

PubMed

De Miguel-Etayo, P; Gracia-Marco, L; Ortega, F B; Intemann, T; Foraita, R; Lissner, L; Oja, L; Barba, G; Michels, N; Tornaritis, M; Molnár, D; Pitsiladis, Y; Ahrens, W; Moreno, L A

2014-09-01

A low fitness status during childhood and adolescence is associated with important health-related outcomes, such as increased future risk for obesity and cardiovascular diseases, impaired skeletal health, reduced quality of life and poor mental health. Fitness reference values for adolescents from different countries have been published, but there is a scarcity of reference values for pre-pubertal children in Europe, using harmonised measures of fitness in the literature. The IDEFICS study offers a good opportunity to establish normative values of a large set of fitness components from eight European countries using common and well-standardised methods in a large sample of children. Therefore, the aim of this study is to report sex- and age-specific fitness reference standards in European children. Children (10,302) aged 6-10.9 years (50.7% girls) were examined. The test battery included: the flamingo balance test, back-saver sit-and-reach test (flexibility), handgrip strength test, standing long jump test (lower-limb explosive strength) and 40-m sprint test (speed). Moreover, cardiorespiratory fitness was assessed by a 20-m shuttle run test. Percentile curves for the 1st, 3rd, 10th, 25th, 50th, 75th, 90th, 97th and 99th percentiles were calculated using the General Additive Model for Location Scale and Shape (GAMLSS). Our results show that boys performed better than girls in speed, lower- and upper-limb strength and cardiorespiratory fitness, and girls performed better in balance and flexibility. Older children performed better than younger children, except for cardiorespiratory fitness in boys and flexibility in girls. Our results provide for the first time sex- and age-specific physical fitness reference standards in European children aged 6-10.9 years.

Flexible Description Language for HPC based Processing of Remote Sense Data

NASA Astrophysics Data System (ADS)

Nandra, Constantin; Gorgan, Dorian; Bacu, Victor

2016-04-01

When talking about Big Data, the most challenging aspect lays in processing them in order to gain new insight, find new patterns and gain knowledge from them. This problem is likely most apparent in the case of Earth Observation (EO) data. With ever higher numbers of data sources and increasing data acquisition rates, dealing with EO data is indeed a challenge [1]. Geoscientists should address this challenge by using flexible and efficient tools and platforms. To answer this trend, the BigEarth project [2] aims to combine the advantages of high performance computing solutions with flexible processing description methodologies in order to reduce both task execution times and task definition time and effort. As a component of the BigEarth platform, WorDeL (Workflow Description Language) [3] is intended to offer a flexible, compact and modular approach to the task definition process. WorDeL, unlike other description alternatives such as Python or shell scripts, is oriented towards the description topologies, using them as abstractions for the processing programs. This feature is intended to make it an attractive alternative for users lacking in programming experience. By promoting modular designs, WorDeL not only makes the processing descriptions more user-readable and intuitive, but also helps organizing the processing tasks into independent sub-tasks, which can be executed in parallel on multi-processor platforms in order to improve execution times. As a BigEarth platform [4] component, WorDeL represents the means by which the user interacts with the system, describing processing algorithms in terms of existing operators and workflows [5], which are ultimately translated into sets of executable commands. The WorDeL language has been designed to help in the definition of compute-intensive, batch tasks which can be distributed and executed on high-performance, cloud or grid-based architectures in order to improve the processing time. Main references for further

Developing the IDEFICS community-based intervention program to enhance eating behaviors in 2- to 8-year-old children: findings from focus groups with children and parents.

PubMed

Haerens, L; De Bourdeaudhuij, I; Barba, G; Eiben, G; Fernandez, J; Hebestreit, A; Kovács, E; Lasn, H; Regber, S; Shiakou, M; De Henauw, S

2009-06-01

One purpose of 'identification and prevention of dietary- and lifestyle-induced health effects in children and infants' (IDEFICS) is to implement a standardized community-based multi-component healthy eating intervention for younger children in eight different countries. The present study describes important influencing factors for dietary behaviors among children aged 2-8 years old in order to determine the best approaches for developing the dietary components of the standardized intervention. Twenty focus groups with children (74 boys, 81 girls) and 36 focus groups with 189 parents (28 men, 161 women) were conducted. Only in two countries, children mentioned receiving nutrition education at school. Rules at home and at school ranged from not allowing the consumption of unhealthy products to allowing everything. The same diversity was found for availability of (un)healthy products at home and school. Parents mentioned personal (lack of time, financial constraints, preferences), socio-environmental (family, peer influences), institutional (school policies) and physical-environmental (availability of unhealthy products, price, season) barriers for healthy eating. This focus group research provided valuable information to guide the first phase in the IDEFICS intervention development. There was a large variability in findings within countries. Interventions should be tailored at the personal and environmental level to increase the likelihood of behavioral change.

40 CFR 158.330 - Description of production process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Description of production process. 158.330 Section 158.330 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.330 Description of production process. If...

40 CFR 158.330 - Description of production process.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Description of production process. 158.330 Section 158.330 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.330 Description of production process. If...

40 CFR 158.330 - Description of production process.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Description of production process. 158.330 Section 158.330 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.330 Description of production process. If...

40 CFR 158.330 - Description of production process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Description of production process. 158.330 Section 158.330 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.330 Description of production process. If...

40 CFR 158.330 - Description of production process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Description of production process. 158.330 Section 158.330 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.330 Description of production process. If...

C-reactive protein reference percentiles among pre-adolescent children in Europe based on the IDEFICS study population.

PubMed

Schlenz, H; Intemann, T; Wolters, M; González-Gil, E M; Nappo, A; Fraterman, A; Veidebaum, T; Molnar, D; Tornaritis, M; Sioen, I; Mårild, S; Iacoviello, L; Ahrens, W

2014-09-01

C-reactive protein (CRP) is involved in a wide range of diseases. It is a powerful marker for inflammatory processes used for diagnostic and monitoring purposes. We aimed to establish reference values as data on the distribution of serum CRP levels in young European children are scarce. Reference values of high-sensitivity CRP concentrations were calculated for 9855 children aged 2.0-10.9 years, stratified by age and sex. The children were recruited during the population-based European IDEFICS study (Identification and prevention of Dietary- and lifestyle-induced health Effects in Children and infantS) with 18 745 participants recruited from 2007 to 2010. In 44.1% of the children, CRP values were below or equal the detection limit of 0.2 mg/l. Median CRP concentrations showed a slight negative age trend in boys and girls, whereas serum CRP values were slightly higher in girls than in boys across all age groups. Our population-based reference values of CRP may guide paediatric practice as elevated values may require further investigation or treatment. Therefore, the presented reference values represent a basis for clinical evaluation and for future research on risk assessment of diseases associated with increased CRP levels among children.

Longitudinal associations of lifestyle factors and weight status with insulin resistance (HOMA-IR) in preadolescent children: the large prospective cohort study IDEFICS.

PubMed

Peplies, Jenny; Börnhorst, Claudia; Günther, Kathrin; Fraterman, Arno; Russo, Paola; Veidebaum, Toomas; Tornaritis, Michael; De Henauw, Stefaan; Marild, Staffan; Molnar, Dénes; Moreno, Luis A; Ahrens, Wolfgang

2016-09-02

This study investigates prospective associations of anthropometrical and lifestyle indices with insulin resistance (IR) in European children from the IDEFICS cohort. Insulin resistance (IR) is a growing concern in childhood obesity and a central aspect of the metabolic syndrome (MS). It most likely represents the link between obesity and type 2 diabetes. This longitudinal study included 3348 preadolescent children aged 3 to 10.9 years from 8 European countries who were observed from 2007/2008 to 2009/2010. The main outcome measure in the present analysis is HOMA-IR (homeostasis model assessment as a common proxy indicator to quantify IR) at follow-up and in its longitudinal development. Anthropometrical measures and lifestyle indices, including objectively determined physical activity, were considered, among others factors, as determinants of IR. Prospective associations between IR at follow-up and anthropometrical and lifestyle indices were estimated by logistic regression models. Country-specific prevalence rates of IR in the IDEFICS cohort of European children showed a positive trend with weight category. Prospective multivariate analyses showed the strongest positive associations of IR with BMI z-score (OR = 2.6 for unit change from the mean, 95 % CI 2.1-3.1) and z-score of waist circumference (OR = 2.2 for unit change from the mean, 95 % CI 1.9-2.6), which were analysed in separate models, but also for sex (OR = 2.2 for girls vs. boys, 95 % CI 1.5-3.1 up to OR 2.5, 95 % CI 1.8-3.6 depending on the model), audio-visual media time (OR = 1.2 for an additional hour per day, 95 % CI 1.0-1.4 in both models) and an inverse association of objectively determined physical activity (OR = 0.5 for 3(rd) compared to 1(st) quartile, 95 % CI 0.3-0.9 in both models). A longitudinal reduction of HOMA-IR was accompanied with a parallel decline in BMI. This study is, to our knowledge, the first prospective study on IR in a preadolescent children

Graphic model of the processes involved in the production of casegood furniture

Treesearch

Kristen G. Hoff; Subhash C. Sarin; R. Bruce Anderson; R. Bruce Anderson

1992-01-01

Imports from foreign furniture manufacturers are on ,the rise, and American manufacturers must take advantage of recent technological advances to regain their lost market share. To facilitate the implementation of these technologies for improving productivity and quality, a graphic model of the wood furniture production process is presented using the IDEF modeling...

IDSE Version 1 User's Manual

NASA Technical Reports Server (NTRS)

Mayer, Richard

1988-01-01

The integrated development support environment (IDSE) is a suite of integrated software tools that provide intelligent support for information modelling. These tools assist in function, information, and process modeling. Additional tools exist to assist in gathering and analyzing information to be modeled. This is a user's guide to application of the IDSE. Sections covering the requirements and design of each of the tools are presented. There are currently three integrated computer aided manufacturing definition (IDEF) modeling methodologies: IDEF0, IDEF1, and IDEF2. Also, four appendices exist to describe hardware and software requirements, installation procedures, and basic hardware usage.

40 CFR 158.335 - Description of formulation process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Description of formulation process. 158.335 Section 158.335 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.335 Description of formulation...

40 CFR 158.335 - Description of formulation process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Description of formulation process. 158.335 Section 158.335 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.335 Description of formulation...

40 CFR 158.335 - Description of formulation process.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 24 2014-07-01 2014-07-01 false Description of formulation process. 158.335 Section 158.335 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.335 Description of formulation...

40 CFR 158.335 - Description of formulation process.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 25 2012-07-01 2012-07-01 false Description of formulation process. 158.335 Section 158.335 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.335 Description of formulation...

40 CFR 158.335 - Description of formulation process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Description of formulation process. 158.335 Section 158.335 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR PESTICIDES Product Chemistry § 158.335 Description of formulation...

Launch Vehicle Design Process Description and Training Formulation

NASA Technical Reports Server (NTRS)

Atherton, James; Morris, Charles; Settle, Gray; Teal, Marion; Schuerer, Paul; Blair, James; Ryan, Robert; Schutzenhofer, Luke

1999-01-01

A primary NASA priority is to reduce the cost and improve the effectiveness of launching payloads into space. As a consequence, significant improvements are being sought in the effectiveness, cost, and schedule of the launch vehicle design process. In order to provide a basis for understanding and improving the current design process, a model has been developed for this complex, interactive process, as reported in the references. This model requires further expansion in some specific design functions. Also, a training course for less-experienced engineers is needed to provide understanding of the process, to provide guidance for its effective implementation, and to provide a basis for major improvements in launch vehicle design process technology. The objective of this activity is to expand the description of the design process to include all pertinent design functions, and to develop a detailed outline of a training course on the design process for launch vehicles for use in educating engineers whose experience with the process has been minimal. Building on a previously-developed partial design process description, parallel sections have been written for the Avionics Design Function, the Materials Design Function, and the Manufacturing Design Function. Upon inclusion of these results, the total process description will be released as a NASA TP. The design function sections herein include descriptions of the design function responsibilities, interfaces, interactive processes, decisions (gates), and tasks. Associated figures include design function planes, gates, and tasks, along with other pertinent graphics. Also included is an expanded discussion of how the design process is divided, or compartmentalized, into manageable parts to achieve efficient and effective design. A detailed outline for an intensive two-day course on the launch vehicle design process has been developed herein, and is available for further expansion. The course is in an interactive lecture

The Springfield Weed and Seed Initiative: A Process Description and Evaluation.

ERIC Educational Resources Information Center

Hanna, Donald G.

A process description and preliminary evaluation are provided for the Weed and Seed initiative in Springfield (Illinois). This initiative involved local, state, and federal resources in projects that included (1) facility improvement, (2) drug prevention, (3) youth education and child care, (4) jobs and vocational training, (5) resident…

Overweight in singletons compared to children with siblings: the IDEFICS study

PubMed Central

Hunsberger, M; Formisano, A; Reisch, L A; Bammann, K; Moreno, L; De Henauw, S; Molnar, D; Tornaritis, M; Veidebaum, T; Siani, A; Lissner, L

2012-01-01

The aim of this study was to compare the prevalence of overweight in only children to those with siblings and to explore potential behavioral mediating factors. This study relies upon cross-sectional data collected at survey centers in eight European countries participating in Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS (IDEFICS). The present analysis is based on measured anthropometry and parent or guardian-reported socio-demographic characteristics. Subjects include 12 720 children aged 2–9 years for whom number of siblings was known. Singletons were more likely (odds ratio 1.52, 95% confidence interval (CI):1.34–1.72) to be overweight than their peers with siblings when controlling for factors related to childhood overweight, including survey country, parental education, parental weight, maternal age, child's age, birth weight and gender. The three southernmost countries have over threefold risk of overweight, dominated by Italy, compared with the north-central countries, which is not explained by the prevalence of singleton children. The excess risk of overweight among children without siblings was robustly observed even when considering behavioral mediating factors (playtime, screen time per day, dietary propensities for sugar or fat, parental attitudes towards food rewards and television in the child's bedroom). Among singletons aged 6–9 years, the excess risk of overweight was 1.70 (95% CI: 1.44–2.01) compared with 1.32 (95% CI: 1.10–1.60) in younger singletons. PMID:23448718

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 30 2012-07-01 2012-07-01 false Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

40 CFR 408.140 - Applicability; description of the tuna processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the tuna... Tuna Processing Subcategory § 408.140 Applicability; description of the tuna processing subcategory. The provisions of this subpart are applicable to discharges resulting from the processing of tuna. [40...

Reference values for leptin and adiponectin in children below the age of 10 based on the IDEFICS cohort.

PubMed

Erhardt, E; Foraita, R; Pigeot, I; Barba, G; Veidebaum, T; Tornaritis, M; Michels, N; Eiben, G; Ahrens, W; Moreno, L A; Kovács, E; Molnár, D

2014-09-01

To establish age- and sex-specific reference values for serum leptin and adiponectin in normal-weight 3.0-8.9-year old European children. Blood samples for hormone analysis were taken from 1338 children of the IDEFICS (Identification and prevention of Dietary- and lifestyle-induced health Effects in Children and infantS) study cohort. Only normal-weight children aged 3.0-8.9 years were included (n=539) in our analysis. Using the General Additive Model for Location Scale and Shape, age- and sex-specific percentiles were derived. The influence of under/overweight and obesity on the proposed reference curves based on normal-weight children was investigated in several sensitivity analyses using the sample without obese children (n=1015) and the whole study sample (n=1338). There was a negative age trend of adiponectin blood levels and a positive trend of leptin levels in boys and girls. Percentiles derived for girls were generally higher than those obtained for boys. The corresponding age-specific differences of the 97th percentile ranged from -2.2 to 4.6 μg ml(-1) and from 2.2 to 4.8 ng ml(-1) for adiponectin and leptin, respectively. According to our knowledge, these are the first reference values of leptin and adiponectin in prepubertal, normal-weight children. The presented adiponectin and leptin reference curves may allow for a more differentiated interpretation of children's hormone levels in epidemiological and clinical studies.

Universal description of III-V/Si epitaxial growth processes

NASA Astrophysics Data System (ADS)

Lucci, I.; Charbonnier, S.; Pedesseau, L.; Vallet, M.; Cerutti, L.; Rodriguez, J.-B.; Tournié, E.; Bernard, R.; Létoublon, A.; Bertru, N.; Le Corre, A.; Rennesson, S.; Semond, F.; Patriarche, G.; Largeau, L.; Turban, P.; Ponchet, A.; Cornet, C.

2018-06-01

Here, we experimentally and theoretically clarify III-V/Si crystal growth processes. Atomically resolved microscopy shows that monodomain three-dimensional islands are observed at the early stages of AlSb, AlN, and GaP epitaxy on Si, independently of misfit. It is also shown that complete III-V/Si wetting cannot be achieved in most III-V/Si systems. Surface/interface contributions to the free-energy variations are found to be prominent over strain relief processes. We finally propose a general and unified description of III-V/Si growth processes, including a description of the formation of antiphase boundaries.

Design and results of the pretest of the IDEFICS study.

PubMed

Suling, M; Hebestreit, A; Peplies, J; Bammann, K; Nappo, A; Eiben, G; Alvira, J M Fernández; Verbestel, V; Kovács, E; Pitsiladis, Y P; Veidebaum, T; Hadjigeorgiou, C; Knof, K; Ahrens, W

2011-04-01

During the preparatory phase of the baseline survey of the IDEFICS (Identification and prevention of dietary- and lifestyle-induced health effects in children and infants) study, standardised survey procedures including instruments, examinations, methods, biological sampling and software tools were developed and pretested for their feasibility, robustness and acceptability. A pretest was conducted of full survey procedures in 119 children aged 2-9 years in nine European survey centres (N(per centre)=4-27, mean 13.22). Novel techniques such as ultrasound measurements to assess subcutaneous fat and bone health, heart rate monitors combined with accelerometers and sensory taste perception tests were used. Biological sampling, physical examinations, sensory taste perception tests, parental questionnaire and medical interview required only minor amendments, whereas physical fitness tests required major adaptations. Callipers for skinfold measurements were favoured over ultrasonography, as the latter showed only a low-to-modest agreement with calliper measurements (correlation coefficients of r=-0.22 and r=0.67 for all children). The combination of accelerometers with heart rate monitors was feasible in school children only. Implementation of the computer-based 24-h dietary recall required a complex and intensive developmental stage. It was combined with the assessment of school meals, which was changed after the pretest from portion weighing to the more feasible observation of the consumed portion size per child. The inclusion of heel ultrasonometry as an indicator of bone stiffness was the most important amendment after the pretest. Feasibility and acceptability of all procedures had to be balanced against their scientific value. Extensive pretesting, training and subsequent refinement of the methods were necessary to assess the feasibility of all instruments and procedures in routine fieldwork and to exchange or modify procedures that would otherwise give invalid or

A Survey of Research Methods to Study Design

DTIC Science & Technology

1989-06-01

Integrated Computer-Aided Manufacturing (ICAM) Definition Languages (IDEFO, IDEF 1, and IDEF 2) Nijssen’s Information Analysis Method (NIAM) * Michael ... Jackson Diagrams 1I-1 • Warnier-Orr Di.grams Hierarchical Input Process Output (HIPO) charts * Nassi Schneiderman Charts. These techniques were intended

Physical activity and sedentary behaviour in European children: the IDEFICS study.

PubMed

Santaliestra-Pasías, Alba Ma; Mouratidou, Theodora; Verbestel, Vera; Bammann, Karin; Molnar, Dénes; Sieri, Sabina; Siani, Alfonso; Veidebaum, Toomas; Mårild, Staffan; Lissner, Lauren; Hadjigeorgiou, Charalambos; Reisch, Lucia; De Bourdeaudhuij, Ilse; Moreno, Luis A

2014-10-01

To estimate the prevalence of physical activity and sedentary behaviours in European children, and to evaluate the relationship between media availability in personal space and physical activity in relation to total screen time. Data from the baseline IDEFICS (Identification and prevention of dietary- and lifestyle-induced health effects in children and infants) cross-sectional survey. Information on hours of television/digital video disk/video viewing and computer/games-console use (weekday and weekend days), media device availability in personal space, sports club membership, hours of active organized play and commuting (to and from school) were assessed via a self-reported parental questionnaire. Total screen time was defined as the sum of daily media use and subsequently dichotomized into meeting or not meeting the guidelines of the American Academy of Pediatrics. Eight survey centres (Italy, Estonia, Cyprus, Belgium, Sweden, Germany, Hungary and Spain). Children (n 15 330; 51% males) aged 2-10 years. Percentage of children engaged in total screen time for >2 h/d was higher on weekend days (52% v. 20% on weekdays) and in the older group (71% in males; 57% in females), varying by country. Children with a television set in their bedroom were more likely not to meet the screen time recommendations (OR = 1·54; 95% CI 1·60, 1·74). Approximately a third of the children failed to meet current screen time recommendations. Availability of a television set in personal space increased the risk of excess total screen time. This information could be used to identify potential targets for public health promotion actions of young population groups.

Towards elicitation of users requirements for hospital information system: from a care process modelling technique to a web based collaborative tool.

PubMed Central

Staccini, Pascal M.; Joubert, Michel; Quaranta, Jean-Francois; Fieschi, Marius

2002-01-01

Growing attention is being given to the use of process modeling methodology for user requirements elicitation. In the analysis phase of hospital information systems, the usefulness of care-process models has been investigated to evaluate the conceptual applicability and practical understandability by clinical staff and members of users teams. Nevertheless, there still remains a gap between users and analysts in their mutual ability to share conceptual views and vocabulary, keeping the meaning of clinical context while providing elements for analysis. One of the solutions for filling this gap is to consider the process model itself in the role of a hub as a centralized means of facilitating communication between team members. Starting with a robust and descriptive technique for process modeling called IDEF0/SADT, we refined the basic data model by extracting concepts from ISO 9000 process analysis and from enterprise ontology. We defined a web-based architecture to serve as a collaborative tool and implemented it using an object-oriented database. The prospects of such a tool are discussed notably regarding to its ability to generate data dictionaries and to be used as a navigation tool through the medium of hospital-wide documentation. PMID:12463921

Towards elicitation of users requirements for hospital information system: from a care process modelling technique to a web based collaborative tool.

PubMed

Staccini, Pascal M; Joubert, Michel; Quaranta, Jean-Francois; Fieschi, Marius

2002-01-01

Growing attention is being given to the use of process modeling methodology for user requirements elicitation. In the analysis phase of hospital information systems, the usefulness of care-process models has been investigated to evaluate the conceptual applicability and practical understandability by clinical staff and members of users teams. Nevertheless, there still remains a gap between users and analysts in their mutual ability to share conceptual views and vocabulary, keeping the meaning of clinical context while providing elements for analysis. One of the solutions for filling this gap is to consider the process model itself in the role of a hub as a centralized means of facilitating communication between team members. Starting with a robust and descriptive technique for process modeling called IDEF0/SADT, we refined the basic data model by extracting concepts from ISO 9000 process analysis and from enterprise ontology. We defined a web-based architecture to serve as a collaborative tool and implemented it using an object-oriented database. The prospects of such a tool are discussed notably regarding to its ability to generate data dictionaries and to be used as a navigation tool through the medium of hospital-wide documentation.

40 CFR 408.150 - Applicability; description of the fish meal processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the fish... CATEGORY Fish Meal Processing Subcategory § 408.150 Applicability; description of the fish meal processing... menhaden on the Gulf and Atlantic Coasts and the processing of anchovy on the West Coast into fish meal...

40 CFR 408.150 - Applicability; description of the fish meal processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the fish... CATEGORY Fish Meal Processing Subcategory § 408.150 Applicability; description of the fish meal processing... menhaden on the Gulf and Atlantic Coasts and the processing of anchovy on the West Coast into fish meal...

40 CFR 408.150 - Applicability; description of the fish meal processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the fish... CATEGORY Fish Meal Processing Subcategory § 408.150 Applicability; description of the fish meal processing... menhaden on the Gulf and Atlantic Coasts and the processing of anchovy on the West Coast into fish meal...

40 CFR 408.150 - Applicability; description of the fish meal processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 30 2012-07-01 2012-07-01 false Applicability; description of the fish... CATEGORY Fish Meal Processing Subcategory § 408.150 Applicability; description of the fish meal processing... menhaden on the Gulf and Atlantic Coasts and the processing of anchovy on the West Coast into fish meal...

40 CFR 408.150 - Applicability; description of the fish meal processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the fish... CATEGORY Fish Meal Processing Subcategory § 408.150 Applicability; description of the fish meal processing... menhaden on the Gulf and Atlantic Coasts and the processing of anchovy on the West Coast into fish meal...

Consequences of an Extended Recruitment on Participation in the Follow-Up of a Child Study: Results from the German IDEFICS Cohort.

PubMed

Langeheine, Malte; Pohlabeln, Hermann; Ahrens, Wolfgang; Rach, Stefan

2017-01-01

Declining response proportions in population-based studies are often countered by extended recruitment efforts at baseline that may, however, result in higher attrition in a subsequent follow-up. This study analysed the effect of extended recruitment efforts on attrition at the first follow-up of a child cohort. We used paradata (i.e. information about the process of data collection) from the German IDEFICS cohort investigating dietary- and life style-induced health effects on children to quantify recruitment effort and classify respondents as completing the recruitment early vs. late for baseline and follow-up separately. Multilevel logistic regression models were used to investigate the association between recruitment effort and attrition at follow-up (loss to follow-up) adjusted for sociodemographic and health related variables. Individuals who were late respondents at baseline and early respondents at the follow-up had a higher chance of attrition (odds ratio 1.65, 95% confidence interval (CI) 1.19, 2.28) as compared to other groups. An investigation of reasons for non-participation revealed that members of this group were more likely to be not reachable by phone. An extended recruitment effort at baseline of a child cohort study is not per se associated with a higher chance of attrition at follow-up. Much care should be taken to collect valid telephone numbers. © 2016 John Wiley & Sons Ltd.

Family structure and childhood obesity: results of the IDEFICS Project.

PubMed

Formisano, Annarita; Hunsberger, Monica; Bammann, Karin; Vanaelst, Barbara; Molnar, Dénes; Moreno, Luis A; Tornaritis, Michael; Veidebaum, Toomas; Lissner, Lauren; Barba, Gianvincenzo; Siani, Alfonso

2014-10-01

To analyse the association between family structure and adiposity in children. Cross-sectional and longitudinal analysis of the IDEFICS (Identification and prevention of dietary- and lifestyle-induced health effects in children and infants) study cohort. Primary schools and kindergartens. Children (n 12 350; aged 7·9 (SD 1·8) years) for the cross-sectional analysis and children (n 5236; at baseline: normal weight, aged 5·9 (SD 1·8) years) for the longitudinal study underwent anthropometry. Family structure was analysed as (i) number and type of cohabiting adults and (ii) number of siblings. In the cross-sectional analysis, after controlling for covariates, children living with grandparents had significantly higher BMI Z-score than those living with both parents (0·63; 95% CI 0·33, 0·92 v. 0·19; 95% CI 0·17, 0·22; P < 0·01); in addition, the higher the number of siblings, the lower the BMI Z-score (only child = 0·31; 95% CI 0·24, 0·38; 1 sibling = 0·19; 95% CI 0·16, 0·23; 2 siblings = 0·15; 95% CI 0·09, 0·20; >2 siblings = 0·07, 95% CI 0·04, 0·19; P < 0·001). Over the 2-year follow-up, differences in weight gain were observed across family-structure categories. Further, the risk of incidence of overweight/obesity was significantly lower the higher the number of siblings living in the household (v. only child: 1 sibling = 0·74, 95% CI 0·57, 0·96; 2 siblings = 0·63, 95% CI 0·45, 0·88; >2 siblings = 0·40, 95% CI 0·21, 0·77), independently of confounders. The study suggests that an independent association between family structure and childhood obesity exists.

Blood fatty acid composition in relation to allergy in children aged 2-9 years: results from the European IDEFICS study.

PubMed

Mikkelsen, A; Galli, C; Eiben, G; Ahrens, W; Iacoviello, L; Molnár, D; Pala, V; Risé, P; Rodriguez, G; Russo, P; Tornaritis, M; Veidebaum, T; Vyncke, K; Wolters, M; Mehlig, K

2017-01-01

Blood polyunsaturated fatty acids (PUFA) are involved in allergy development, but the etiological role of n-6 and n-3 PUFA is still controversial. A European multicenter study of children (IDEFICS) provided the opportunity to explore the cross-sectional association between fatty acids (FA) and allergy. Blood FA levels were measured in 2600 children aged 2-9 years and were recorded as the percentage of weight of all FA detected. Logistic regression of allergy status on FA components was adjusted for age, sex, country, body mass index, family history of allergic disease, breast-feeding, and number of siblings. The results were given as odds ratios (OR) for current vs no allergy ever and an increase in FA by 1 s.d. Overall, higher proportions of n-6 PUFA were associated with higher odds of allergy (OR=1.21 (1.05, 1.40)). Monounsaturated FA (MUFA) were associated with reduced risk for allergy (OR=0.75 (0.65, 0.87)), whereas saturated FA did not differ by allergy status. The strongest associations were observed in children <4 years old, with ORs of allergy given as 1.62 (1.15, 2.29) for n-3 PUFA and 0.63 (0.42, 0.95) for MUFA. With regard to individual FA, these associations were independently observed for docosapentaenoic acid (22:5 n-3) and oleic acid (18:1 n-9). Both PUFA subtypes were positively associated with allergy in an age-dependent manner, whereas MUFA was associated with less allergy. The observation of high proportions of n-3 PUFA in allergic children younger than 4 years might help to understand the nature of early onset of atopic disease.

An object-oriented description method of EPMM process

NASA Astrophysics Data System (ADS)

Jiang, Zuo; Yang, Fan

2017-06-01

In order to use the object-oriented mature tools and language in software process model, make the software process model more accord with the industrial standard, it’s necessary to study the object-oriented modelling of software process. Based on the formal process definition in EPMM, considering the characteristics that Petri net is mainly formal modelling tool and combining the Petri net modelling with the object-oriented modelling idea, this paper provides this implementation method to convert EPMM based on Petri net into object models based on object-oriented description.

40 CFR 161.165 - Description of formulation process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Description of formulation process. 161.165 Section 161.165 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES Product Chemistry Data...

40 CFR 161.165 - Description of formulation process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Description of formulation process. 161.165 Section 161.165 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES Product Chemistry Data...

40 CFR 161.162 - Description of production process.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 25 2013-07-01 2013-07-01 false Description of production process. 161.162 Section 161.162 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES Product Chemistry Data Requirements...

40 CFR 161.165 - Description of formulation process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 24 2011-07-01 2011-07-01 false Description of formulation process. 161.165 Section 161.165 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS DATA REQUIREMENTS FOR REGISTRATION OF ANTIMICROBIAL PESTICIDES Product Chemistry Data...

Percentile reference values for anthropometric body composition indices in European children from the IDEFICS study.

PubMed

Nagy, P; Kovacs, E; Moreno, L A; Veidebaum, T; Tornaritis, M; Kourides, Y; Siani, A; Lauria, F; Sioen, I; Claessens, M; Mårild, S; Lissner, L; Bammann, K; Intemann, T; Buck, C; Pigeot, I; Ahrens, W; Molnár, D

2014-09-01

To characterise the nutritional status in children with obesity or wasting conditions, European anthropometric reference values for body composition measures beyond the body mass index (BMI) are needed. Differentiated assessment of body composition in children has long been hampered by the lack of appropriate references. The aim of our study is to provide percentiles for body composition indices in normal weight European children, based on the IDEFICS cohort (Identification and prevention of Dietary- and lifestyle-induced health Effects in Children and infantS). Overall 18,745 2.0-10.9-year-old children from eight countries participated in the study. Children classified as overweight/obese or underweight according to IOTF (N=5915) were excluded from the analysis. Anthropometric measurements (BMI (N=12 830); triceps, subscapular, fat mass and fat mass index (N=11,845-11,901); biceps, suprailiac skinfolds, sum of skinfolds calculated from skinfold thicknesses (N=8129-8205), neck circumference (N=12,241); waist circumference and waist-to-height ratio (N=12,381)) were analysed stratified by sex and smoothed 1st, 3rd, 10th, 25th, 50th, 75th, 90th, 97th and 99th percentile curves were calculated using GAMLSS. Percentile values of the most important anthropometric measures related to the degree of adiposity are depicted for European girls and boys. Age- and sex-specific differences were investigated for all measures. As an example, the 50th and 99th percentile values of waist circumference ranged from 50.7-59.2 cm and from 51.3-58.7 cm in 4.5- to <5.0-year-old girls and boys, respectively, to 60.6-74.5 cm in girls and to 59.9-76.7 cm in boys at the age of 10.5-10.9 years. The presented percentile curves may aid a differentiated assessment of total and abdominal adiposity in European children.

Flexible Description and Adaptive Processing of Earth Observation Data through the BigEarth Platform

NASA Astrophysics Data System (ADS)

Gorgan, Dorian; Bacu, Victor; Stefanut, Teodor; Nandra, Cosmin; Mihon, Danut

2016-04-01

The Earth Observation data repositories extending periodically by several terabytes become a critical issue for organizations. The management of the storage capacity of such big datasets, accessing policy, data protection, searching, and complex processing require high costs that impose efficient solutions to balance the cost and value of data. Data can create value only when it is used, and the data protection has to be oriented toward allowing innovation that sometimes depends on creative people, which achieve unexpected valuable results through a flexible and adaptive manner. The users need to describe and experiment themselves different complex algorithms through analytics in order to valorize data. The analytics uses descriptive and predictive models to gain valuable knowledge and information from data analysis. Possible solutions for advanced processing of big Earth Observation data are given by the HPC platforms such as cloud. With platforms becoming more complex and heterogeneous, the developing of applications is even harder and the efficient mapping of these applications to a suitable and optimum platform, working on huge distributed data repositories, is challenging and complex as well, even by using specialized software services. From the user point of view, an optimum environment gives acceptable execution times, offers a high level of usability by hiding the complexity of computing infrastructure, and supports an open accessibility and control to application entities and functionality. The BigEarth platform [1] supports the entire flow of flexible description of processing by basic operators and adaptive execution over cloud infrastructure [2]. The basic modules of the pipeline such as the KEOPS [3] set of basic operators, the WorDeL language [4], the Planner for sequential and parallel processing, and the Executor through virtual machines, are detailed as the main components of the BigEarth platform [5]. The presentation exemplifies the development

Early Life Factors and Inter-Country Heterogeneity in BMI Growth Trajectories of European Children: The IDEFICS Study

PubMed Central

Börnhorst, Claudia; Siani, Alfonso; Russo, Paola; Kourides, Yannis; Sion, Isabelle; Molnár, Denés; Moreno, Luis A.; Rodríguez, Gerardo; Ben-Shlomo, Yoav; Howe, Laura; Lissner, Lauren; Mehlig, Kirsten; Regber, Susann; Bammann, Karin; Foraita, Ronja

2016-01-01

Background Starting from birth, this explorative study aimed to investigate between-country differences in body mass index (BMI) trajectories and whether early life factors explain these differences. Methods The sample included 7,644 children from seven European countries (Belgium, Cyprus, Germany, Hungary, Italy, Spain, Sweden) participating in the multi-centre IDEFICS study. Information on early life factors and in total 53,409 repeated measurements of height and weight from 0 to <12 years of age were collected during the baseline (2007/2008) and follow-up examination (2009/2010) supplemented by records of routine child health visits. Country-specific BMI growth curves were estimated using fractional polynomial mixed effects models. Several covariates focussing on early life factors were added to the models to investigate their role in the between-countries differences. Results Large between-country differences were observed with Italian children showing significantly higher mean BMI values at all ages ≥ 3 years compared to the other countries. For instance, at age 11 years mean BMI values in Italian boys and girls were 22.3 [21.9;22.8; 99% confidence interval] and 22.0 [21.5;22.4], respectively, compared to a range of 18.4 [18.1;18.8] to 20.3 [19.8;20.7] in boys and 18.2 [17.8;18.6] to 20.3 [19.8;20.7] in girls in the other countries. After adjustment for early life factors, differences between country-specific BMI curves became smaller. Maternal BMI was the factor being most strongly associated with BMI growth (p<0.01 in all countries) with associations increasing during childhood. Gestational weight gain (GWG) was weakly associated with BMI at birth in all countries. In some countries, positive associations between BMI growth and children not being breastfed, mothers’ smoking during pregnancy and low educational level of parents were found. Conclusion Early life factors seem to explain only some of the inter-country variation in growth. Maternal BMI showed

Prevalence of negative life events and chronic adversities in European pre- and primary-school children: results from the IDEFICS study

PubMed Central

2012-01-01

Background Children are not always recognized as being susceptible to stress, although childhood stressors may originate from multiple events in their everyday surroundings with negative effects on children’s health. Methods As there is a lack of large-scale, European prevalence data on childhood adversities, this study presents the prevalence of (1) negative life events and (2) familial and social adversities in 4637 European pre- and primary-school children (4–11 years old), using a parentally-reported questionnaire embedded in the IDEFICS project (‘Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS’). Results The following findings were observed: (1) Certain adversities occur only rarely, while others are very regular (i.e. parental divorce); (2) A large percentage of children is shielded from stressors, while a small group of children is exposed to multiple, accumulating adversities; (3) The prevalence of childhood adversity is influenced by geographical location (e.g. north versus south), age group and sex; (4) Childhood adversities are associated and co-occur, resulting in potential cumulative childhood stress. Conclusions This study demonstrated the importance of not only studying traumatic events but also of focusing on the early familial and social environment in childhood stress research and indicated the importance of recording or monitoring childhood adversities. PMID:23173879

40 CFR 408.330 - Applicability; description of the abalone processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... abalone processing subcategory. 408.330 Section 408.330 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Abalone Processing Subcategory § 408.330 Applicability; description of the abalone processing... abalone in the contiguous states. ...

Description and Evaluation of GDEM-V 3.0

DTIC Science & Technology

2009-02-06

Description and Evaluation of GDEM -V 3.0 Michael R. caRnes Ocean Sciences Branch Oceanography Division February 6, 2009 i REPORT DOCUMENTATION PAGE Form...include area code) b. ABSTRACT c. THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Description and Evaluation of GDEM -V 3.0 Michael R. Carnes...unlimited. Unclassified Unclassified Unclassified UL 24 Michael R. Carnes (228) 688-5648 The GDEM (Generalized Digital Environment Model) has served as

[Systemic inflammation: theoretical and methodological approaches to description of general pathological process model. Part 3. Backgroung for nonsyndromic approach].

PubMed

Gusev, E Yu; Chereshnev, V A

2013-01-01

Theoretical and methodological approaches to description of systemic inflammation as general pathological process are discussed. It is shown, that there is a need of integration of wide range of types of researches to develop a model of systemic inflammation.

40 CFR 410.30 - Applicability; description of the low water use processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the low... PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Low Water Use Processing Subcategory § 410.30 Applicability; description of the low water use processing...

Quantitative description of respiration processes in meso-eutrophic and eutrophic freshwater environments.

PubMed

Kiersztyn, Bartosz; Kauppinen, Elsi S; Kaliński, Tomasz; Chróst, Ryszard; Siuda, Waldemar

2018-06-01

We propose a modification of measurement methodology allowing the overall respiration rate (V Resp ) close to the in situ conditions; size of the labile, respirable organic matter pool (OM Resp ); and its turnover time (Tt) to be calculated. In addition to the respiration of dissolved substrates by free-living bacteria, the respiration of attached bacteria and other planktonic organisms is also taken into account. In case study we evaluated the modified, quantitative description of respiration processes in surface waters of lakes of different trophic status: mezzo-eutrophic and eutrophic. In both types of studied environments, V Resp oscillated between 1.0 μmol C l -1  h -1 and 3.0 μmol C l -1  h -1 , and the size of the OM Resp pool varied from 39.3 μM C to 828.7 μM C. Despite of higher OM Resp concentrations in eutrophic lakes, we found a lower susceptibility of OM to respiration processes in eutrophic than in meso-eutrophic lakes but similar V Resp in both types of lakes. We conclude that the proposed method allows a fast quantitative description of labile organic matter utilization by aerobic aquatic microorganisms. Copyright © 2018 Elsevier B.V. All rights reserved.

Functional description of signal processing in the Rogue GPS receiver

NASA Technical Reports Server (NTRS)

Thomas, J. B.

1988-01-01

Over the past year, two Rogue GPS prototype receivers have been assembled and successfully subjected to a variety of laboratory and field tests. A functional description is presented of signal processing in the Rogue receiver, tracing the signal from RF input to the output values of group delay, phase, and data bits. The receiver can track up to eight satellites, without time multiplexing among satellites or channels, simultaneously measuring both group delay and phase for each of three channels (L1-C/A, L1-P, L2-P). The Rogue signal processing described requires generation of the code for all three channels. Receiver functional design, which emphasized accuracy, reliability, flexibility, and dynamic capability, is summarized. A detailed functional description of signal processing is presented, including C/A-channel and P-channel processing, carrier-aided averaging of group delays, checks for cycle slips, acquistion, and distinctive features.

A novel binary shape context for 3D local surface description

NASA Astrophysics Data System (ADS)

Dong, Zhen; Yang, Bisheng; Liu, Yuan; Liang, Fuxun; Li, Bijun; Zang, Yufu

2017-08-01

3D local surface description is now at the core of many computer vision technologies, such as 3D object recognition, intelligent driving, and 3D model reconstruction. However, most of the existing 3D feature descriptors still suffer from low descriptiveness, weak robustness, and inefficiency in both time and memory. To overcome these challenges, this paper presents a robust and descriptive 3D Binary Shape Context (BSC) descriptor with high efficiency in both time and memory. First, a novel BSC descriptor is generated for 3D local surface description, and the performance of the BSC descriptor under different settings of its parameters is analyzed. Next, the descriptiveness, robustness, and efficiency in both time and memory of the BSC descriptor are evaluated and compared to those of several state-of-the-art 3D feature descriptors. Finally, the performance of the BSC descriptor for 3D object recognition is also evaluated on a number of popular benchmark datasets, and an urban-scene dataset is collected by a terrestrial laser scanner system. Comprehensive experiments demonstrate that the proposed BSC descriptor obtained high descriptiveness, strong robustness, and high efficiency in both time and memory and achieved high recognition rates of 94.8%, 94.1% and 82.1% on the considered UWA, Queen, and WHU datasets, respectively.

40 CFR 424.30 - Applicability; description of the slag processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... processing subcategory. 424.30 Section 424.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS FERROALLOY MANUFACTURING POINT SOURCE CATEGORY Slag Processing Subcategory § 424.30 Applicability; description of the slag processing subcategory. The provisions of this...

Mapping care processes within a hospital: from theory to a web-based proposal merging enterprise modelling and ISO normative principles.

PubMed

Staccini, Pascal; Joubert, Michel; Quaranta, Jean-François; Fieschi, Marius

2005-03-01

Today, the economic and regulatory environment, involving activity-based and prospective payment systems, healthcare quality and risk analysis, traceability of the acts performed and evaluation of care practices, accounts for the current interest in clinical and hospital information systems. The structured gathering of information relative to users' needs and system requirements is fundamental when installing such systems. This stage takes time and is generally misconstrued by caregivers and is of limited efficacy to analysts. We used a modelling technique designed for manufacturing processes (IDEF0/SADT). We enhanced the basic model of an activity with descriptors extracted from the Ishikawa cause-and-effect diagram (methods, men, materials, machines, and environment). We proposed an object data model of a process and its components, and programmed a web-based tool in an object-oriented environment. This tool makes it possible to extract the data dictionary of a given process from the description of its elements and to locate documents (procedures, recommendations, instructions) according to each activity or role. Aimed at structuring needs and storing information provided by directly involved teams regarding the workings of an institution (or at least part of it), the process-mapping approach has an important contribution to make in the analysis of clinical information systems.

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2011 CFR

2011-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

15 CFR 290.3 - Program description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... OF STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE NIST EXTRAMURAL PROGRAMS REGIONAL CENTERS FOR THE TRANSFER OF MANUFACTURING TECHNOLOGY § 290.3 Program description. (a) The Secretary, acting through the... for the Transfer of Manufacturing Technology. Each Center shall be affiliated with a U.S.-based...

Parental education and frequency of food consumption in European children: the IDEFICS study.

PubMed

Fernández-Alvira, Juan Miguel; Mouratidou, Theodora; Bammann, Karin; Hebestreit, Antje; Barba, Gianvincenzo; Sieri, Sabina; Reisch, Lucia; Eiben, Gabriele; Hadjigeorgiou, Charalampos; Kovacs, Eva; Huybrechts, Inge; Moreno, Luis A

2013-03-01

To assess the relationship between parental education level and the consumption frequency of obesity-related foods in European children. The analysis was based on data from the cross-sectional baseline survey of a prospective cohort study. The effects of parental education on food consumption were explored using analysis of covariance and logistic regression. Primary schools and pre-schools of selected regions in Italy, Estonia, Cyprus, Belgium, Sweden, Hungary, Germany and Spain. Participants (n 14,426) of the IDEFICS baseline cohort study aged 2 to 9 years. Parental education level affected the intake of obesity-related foods in children. Children in the low and medium parental education level groups had lower odds of more frequently eating low-sugar and low-fat foods (vegetables, fruits, pasta/noodles/rice and wholemeal bread) and higher odds of more frequently eating high-sugar and high-fat foods (fried potatoes, fruits with sugar and nuts, snacks/desserts and sugared beverages; P < 0.001). The largest odds ratio differences were found in the low category (reference category: high) for vegetables (OR = 0.56; 95 % CI 0.47, 0.65), fruits (OR = 0.56; 95% CI 0.48, 0.65), fruits with sugar and nuts (OR = 2.23; 95% CI 1.92, 2.59) and sugared beverages (OR = 2.01; 95% CI 1.77, 2.37). Low parental education level was associated with intakes of sugar-rich and fatty foods among children, while high parental education level was associated with intakes of low-sugar and low-fat foods. These findings should be taken into account in public health interventions, with more targeted policies aiming at an improvement of children's diet.

25 CFR 160.3 - Leases to include description of lands.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Leases to include description of lands. 160.3 Section 160.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INCLUSION OF LIENS IN ALL PATENTS AND INSTRUMENTS EXECUTED § 160.3 Leases to include description of lands. It is important...

25 CFR 160.3 - Leases to include description of lands.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Leases to include description of lands. 160.3 Section 160.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INCLUSION OF LIENS IN ALL PATENTS AND INSTRUMENTS EXECUTED § 160.3 Leases to include description of lands. It is important...

25 CFR 160.3 - Leases to include description of lands.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Leases to include description of lands. 160.3 Section 160.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INCLUSION OF LIENS IN ALL PATENTS AND INSTRUMENTS EXECUTED § 160.3 Leases to include description of lands. It is important...

25 CFR 160.3 - Leases to include description of lands.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Leases to include description of lands. 160.3 Section 160.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INCLUSION OF LIENS IN ALL PATENTS AND INSTRUMENTS EXECUTED § 160.3 Leases to include description of lands. It is important...

25 CFR 160.3 - Leases to include description of lands.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Leases to include description of lands. 160.3 Section 160.3 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INCLUSION OF LIENS IN ALL PATENTS AND INSTRUMENTS EXECUTED § 160.3 Leases to include description of lands. It is important...

Infant feeding practices and prevalence of obesity in eight European countries - the IDEFICS study.

PubMed

Hunsberger, Monica; Lanfer, Anne; Reeske, Anna; Veidebaum, Toomas; Russo, Paola; Hadjigeorgiou, Charalampos; Moreno, Luis A; Molnar, Dénes; De Henauw, Stefaan; Lissner, Lauren; Eiben, Gabriele

2013-02-01

To assess the association between exclusive breast-feeding and childhood overweight. Cross-sectional data are from the baseline survey of the longitudinal cohort study IDEFICS. Exclusive rather than partial breast-feeding is the focus of the study due to the theoretical relationship between exclusive breast-feeding and development of dietary self-regulation. Children's measured heights and weights were used to calculate weight status, while waist-to-height ratio (WtHR) and skinfold measures were examined as alternative indicators of adiposity and fat patterning. Examination centres in eight European countries (Italy, Estonia, Cyprus, Belgium, Sweden, Hungary, Germany and Spain). The analysis included 14 726 children aged 2-9 years for whom early feeding practices were reported by parents in standardized questionnaires. After controlling for education, income and other potential confounders, breast-feeding exclusively for 4-6 months was protective of overweight (including obesity) when compared with children never exclusively breast-fed (OR = 0·73; 95 % CI 0·63, 0·85) across all measures of overweight. Exclusively breast-feeding for 6 months offered slightly more protection than for 4 and 5 months combined (OR = 0·71; 95 % CI 0·58, 0·85). The associations could not be explained by socio-economic characteristics or maternal overweight. This multi-country investigation indicated that exclusive breast-feeding for 4-6 months may confer protection against overweight in addition to other known benefits. There was no demonstrated benefit of exclusive breast-feeding for more than 6 months or combination feeding for any duration across all measures of overweight examined.

Small Interactive Image Processing System (SMIPS) system description

NASA Technical Reports Server (NTRS)

Moik, J. G.

1973-01-01

The Small Interactive Image Processing System (SMIPS) operates under control of the IBM-OS/MVT operating system and uses an IBM-2250 model 1 display unit as interactive graphic device. The input language in the form of character strings or attentions from keys and light pen is interpreted and causes processing of built-in image processing functions as well as execution of a variable number of application programs kept on a private disk file. A description of design considerations is given and characteristics, structure and logic flow of SMIPS are summarized. Data management and graphic programming techniques used for the interactive manipulation and display of digital pictures are also discussed.

U-10Mo Baseline Fuel Fabrication Process Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hubbard, Lance R.; Arendt, Christina L.; Dye, Daniel F.

This document provides a description of the U.S. High Power Research Reactor (USHPRR) low-enriched uranium (LEU) fuel fabrication process. This document is intended to be used in conjunction with the baseline process flow diagram (PFD) presented in Appendix A. The baseline PFD is used to document the fabrication process, communicate gaps in technology or manufacturing capabilities, convey alternatives under consideration, and as the basis for a dynamic simulation model of the fabrication process. The simulation model allows for the assessment of production rates, costs, and manufacturing requirements (manpower, fabrication space, numbers and types of equipment, etc.) throughout the lifecycle ofmore » the USHPRR program. This document, along with the accompanying PFD, is updated regularly« less

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 409.10 - Applicability; description of the beet sugar processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... sugar processing subcategory. 409.10 Section 409.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Beet Sugar Processing Subcategory § 409.10 Applicability; description of the beet sugar processing subcategory. The...

40 CFR 406.60 - Applicability; description of the parboiled rice processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... parboiled rice processing subcategory. 406.60 Section 406.60 Protection of Environment ENVIRONMENTAL... Rice Processing Subcategory § 406.60 Applicability; description of the parboiled rice processing... rice is cleaned, cooked and dried before being milled. ...

Early life course risk factors for childhood obesity: the IDEFICS case-control study.

PubMed

Bammann, Karin; Peplies, Jenny; De Henauw, Stefaan; Hunsberger, Monica; Molnar, Denes; Moreno, Luis A; Tornaritis, Michael; Veidebaum, Toomas; Ahrens, Wolfgang; Siani, Alfonso

2014-01-01

The early life course is assumed to be a critical phase for childhood obesity; however the significance of single factors and their interplay is not well studied in childhood populations. The investigation of pre-, peri- and postpartum risk factors on the risk of obesity at age 2 to 9. A case-control study with 1,024 1:1-matched case-control pairs was nested in the baseline survey (09/2007-05/2008) of the IDEFICS study, a population-based intervention study on childhood obesity carried out in 8 European countries in pre- and primary school settings. Conditional logistic regression was used for identification of risk factors. For many of the investigated risk factors, we found a raw effect in our study. In multivariate models, we could establish an effect for gestational weight gain (adjusted OR = 1.02; 95%CI 1.00-1.04), smoking during pregnancy (adjusted OR = 1.48; 95%CI 1.08-2.01), Caesarian section (adjusted OR = 1.38; 95%CI 1.10-1.74), and breastfeeding 4 to 11 months (adjusted OR = 0.77; 95%CI 0.62-0.96). Birth weight was related to lean mass rather than to fat mass, the effect of smoking was found only in boys, but not in girls. After additional adjustment for parental BMI and parental educational status, only gestational weight gain remained statistically significant. Both, maternal as well as paternal BMI were the strongest risk factors in our study, and they confounded several of the investigated associations. Key risk factors of childhood obesity in our study are parental BMI and gestational weight gain; consequently prevention approaches should target not only children but also adults. The monitoring of gestational weight seems to be of particular importance for early prevention of childhood obesity.

The use of process approach to base the need of automation of business processes in educational institutions

NASA Astrophysics Data System (ADS)

Frolova, M. A.; Razumova, T. A.

2017-01-01

This article is dedicated to the analysis of business processes in a comprehensive institution on the basis of the process approach. Decomposition of the processes in study is carried out by means of the IDEF0 methodology, both the basic mechanisms and control actions are determined, AS-IS diagrams for documentation support for educational service provision are developed. Disadvantages of the existing business processes are revealed on the basis of the diagrams and a way to solve the problem is proposed which allows increasing the efficiency of the use of labor resources. The results of the implementation of the solution that takes into account the use of software as a means of the solution are presented as TO-BE diagrams. The analysis carried out on the basis of the diagrams led to the conclusion about the need to automate the test-task database formation process for preparing students for the State Final Examination.

Use of modeling to identify vulnerabilities to human error in laparoscopy.

PubMed

Funk, Kenneth H; Bauer, James D; Doolen, Toni L; Telasha, David; Nicolalde, R Javier; Reeber, Miriam; Yodpijit, Nantakrit; Long, Myra

2010-01-01

This article describes an exercise to investigate the utility of modeling and human factors analysis in understanding surgical processes and their vulnerabilities to medical error. A formal method to identify error vulnerabilities was developed and applied to a test case of Veress needle insertion during closed laparoscopy. A team of 2 surgeons, a medical assistant, and 3 engineers used hierarchical task analysis and Integrated DEFinition language 0 (IDEF0) modeling to create rich models of the processes used in initial port creation. Using terminology from a standardized human performance database, detailed task descriptions were written for 4 tasks executed in the process of inserting the Veress needle. Key terms from the descriptions were used to extract from the database generic errors that could occur. Task descriptions with potential errors were translated back into surgical terminology. Referring to the process models and task descriptions, the team used a modified failure modes and effects analysis (FMEA) to consider each potential error for its probability of occurrence, its consequences if it should occur and be undetected, and its probability of detection. The resulting likely and consequential errors were prioritized for intervention. A literature-based validation study confirmed the significance of the top error vulnerabilities identified using the method. Ongoing work includes design and evaluation of procedures to correct the identified vulnerabilities and improvements to the modeling and vulnerability identification methods. Copyright 2010 AAGL. Published by Elsevier Inc. All rights reserved.

Description of saturation curves and boiling process of dry air

NASA Astrophysics Data System (ADS)

Vestfálová, Magda; Petříková, Markéta; Šimko, Martin

2018-06-01

Air is a mixture of gases forming the gas wrap of Earth. It is formed by dry air, moisture and other pollutants. Dry air is a substance whose thermodynamic properties in gaseous state, as well as the thermodynamic properties of its main constituents in gaseous state, are generally known and described in detail in the literature. The liquid air is a bluish liquid and is industrially used to produce oxygen, nitrogen, argon and helium by distillation. The transition between the gaseous and liquid state (the condensation process, resp. boiling process), is usually displayed in the basic thermodynamic diagrams using the saturation curves. The saturation curves of all pure substances are of a similar shape. However, since the dry air is a mixture, the shapes of its saturation curves are modified relative to the shapes corresponding to the pure substances. This paper deals with the description of the dry air saturation curves as a mixture, i.e. with a description of the process of phase change of dry air (boiling process). The dry air saturation curves are constructed in the basic thermodynamic charts based on the values obtained from the literature. On the basis of diagrams, data appearing in various publications are interpreted and put into context with boiling process of dry air.

Descriptive and evaluative judgment processes: behavioral and electrophysiological indices of processing symmetry and aesthetics.

PubMed

Jacobsen, Thomas; Höfel, Lea

2003-12-01

Descriptive symmetry and evaluative aesthetic judgment processes were compared using identical stimuli in both judgment tasks. Electrophysiological activity was recorded while participants judged novel formal graphic patterns in a trial-by-trial cuing setting using binary responses (symmetric, not symmetric; beautiful, not beautiful). Judgment analyses of a Phase 1 test and main experiment performance resulted in individual models, as well as group models, of the participants' judgment systems. Symmetry showed a strong positive correlation with beautiful judgments and was the most important cue. Descriptive judgments were performed faster than evaluative judgments. The ERPs revealed a phasic, early frontal negativity for the not-beautiful judgments. A sustained posterior negativity was observed in the symmetric condition. All conditions showed late positive potentials (LPPs). Evaluative judgment LPPs revealed a more pronounced right lateralization. It is argued that the present aesthetic judgments engage a two-stage process consisting of early, anterior frontomedian impression formation after 300 msec and right-hemisphere evaluative categorization around 600 msec after onset of the graphic patterns.

40 CFR 408.200 - Applicability; description of the Alaskan bottom fish processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Alaskan bottom fish processing subcategory. 408.200 Section 408.200 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Bottom Fish Processing Subcategory § 408.200 Applicability; description of the Alaskan bottom fish processing subcategory. The provisions of this subpart are applicable...

40 CFR 408.200 - Applicability; description of the Alaskan bottom fish processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Alaskan bottom fish processing subcategory. 408.200 Section 408.200 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Bottom Fish Processing Subcategory § 408.200 Applicability; description of the Alaskan bottom fish processing subcategory. The provisions of this subpart are applicable...

40 CFR 408.200 - Applicability; description of the Alaskan bottom fish processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Alaskan bottom fish processing subcategory. 408.200 Section 408.200 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Bottom Fish Processing Subcategory § 408.200 Applicability; description of the Alaskan bottom fish processing subcategory. The provisions of this subpart are applicable...

40 CFR 408.200 - Applicability; description of the Alaskan bottom fish processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Alaskan bottom fish processing subcategory. 408.200 Section 408.200 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Bottom Fish Processing Subcategory § 408.200 Applicability; description of the Alaskan bottom fish processing subcategory. The provisions of this subpart are applicable...

40 CFR 408.200 - Applicability; description of the Alaskan bottom fish processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Alaskan bottom fish processing subcategory. 408.200 Section 408.200 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Bottom Fish Processing Subcategory § 408.200 Applicability; description of the Alaskan bottom fish processing subcategory. The provisions of this subpart are applicable...

40 CFR 408.100 - Applicability; description of the remote Alaskan shrimp processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... remote Alaskan shrimp processing subcategory. 408.100 Section 408.100 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Remote Alaskan Shrimp Processing Subcategory § 408.100 Applicability; description of the remote Alaskan shrimp processing subcategory. The provisions of this subpart are applicable...

40 CFR 408.100 - Applicability; description of the remote Alaskan shrimp processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... remote Alaskan shrimp processing subcategory. 408.100 Section 408.100 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Remote Alaskan Shrimp Processing Subcategory § 408.100 Applicability; description of the remote Alaskan shrimp processing subcategory. The provisions of this subpart are applicable...

40 CFR 408.170 - Applicability; description of the Alaskan mechanized salmon processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Alaskan mechanized salmon processing subcategory. 408.170 Section 408.170 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Mechanized Salmon Processing Subcategory § 408.170 Applicability; description of the Alaskan mechanized salmon processing subcategory. The provisions of this subpart are...

40 CFR 408.170 - Applicability; description of the Alaskan mechanized salmon processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Alaskan mechanized salmon processing subcategory. 408.170 Section 408.170 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Mechanized Salmon Processing Subcategory § 408.170 Applicability; description of the Alaskan mechanized salmon processing subcategory. The provisions of this subpart are...

Adherence to combined lifestyle factors and their contribution to obesity in the IDEFICS study.

PubMed

Kovács, E; Hunsberger, M; Reisch, L; Gwozdz, W; Eiben, G; De Bourdeaudhuij, I; Russo, P; Veidebaum, T; Hadjigeorgiou, C; Sieri, S; Moreno, L A; Pigeot, I; Ahrens, W; Pohlabeln, H; Molnár, D

2015-12-01

The Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS (IDEFICS) study investigated the aetiology of childhood obesity and developed a primary prevention programme. Pre-intervention adherence to key behaviours related to childhood obesity, namely water/sweetened drink, fruit/vegetable consumption, daily TV time, physical activity, family time and adequate sleep duration, was measured at baseline. Adherence to international recommendations was converted into a composite score ranging from 0 (none) to 6 (adhering to all). Data on adherence were available for 7,444 to 15,084 children aged 2-9.9 years, depending on the behaviour. By means of multi-level logistic regression models adjusted for age, sex and country, we calculated odds ratios (OR) and 95% confidence intervals (CI) to estimate the relationship between adherence to these recommendations and the risk of being overweight/obese. Adherence ranged from 15.0% (physical activity) to 51.9% (TV time). As adherence increased, a lower chance of being overweight/obese was observed; adhering to only one key behaviour (score = 1) meant an OR = 0.81 (CI: 0.65-1.01) compared with non-adherence (score = 0), while adhering to more than half of the key behaviours (score ≥ 4) halved the chance for overweight/obesity (OR = 0.54, CI: 0.37-0.80). Adherence to physical activity, TV and sleep recommendations was the main driver reducing the chance of being overweight. Overweight/obese children were more likely not to adhere to at least one of the recommended behaviours (19.8%) than normal-weight/thin children (12.9%) The selected key behaviours do not contribute equally to a reduced chance of being overweight. Future interventions may benefit most from moving more, reducing TV time and getting adequate sleep. © 2015 World Obesity.

40 CFR 458.40 - Applicability; description of the carbon black lamp process subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... carbon black lamp process subcategory. 458.40 Section 458.40 Protection of Environment ENVIRONMENTAL... CATEGORY Carbon Black Lamp Process Subcategory § 458.40 Applicability; description of the carbon black lamp... production of carbon black by the lamp process. ...

40 CFR 410.30 - Applicability; description of the low water use processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... water use processing subcategory. 410.30 Section 410.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TEXTILE MILLS POINT SOURCE CATEGORY Low Water Use Processing Subcategory § 410.30 Applicability; description of the low water use processing...

Waste receiving and processing plant control system; system design description

DOE Office of Scientific and Technical Information (OSTI.GOV)

LANE, M.P.

1999-02-24

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed asmore » separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.« less

Residency selection process: description and annotated bibliography.

PubMed Central

Aaron, P R; Frye, T L

1979-01-01

Specialty and residency training choices of medical students will affect the quality, mode, and geographic location of their future practice; the importance of such choices should not be underestimated. Medical school librarians have largely ignored the opportunity to interact with both medical students and medical school officials in providing sources needed to assist these career decisions, and for the most part students and administrators have ignored the opportunity to utilize the medical library in this process. This article presents an overview of the processes and procedures in which third- and fourth-year medical students are involved in selecting specialty and residency training, and provides a detailed description of the resources which the medical student should consult in order to make thoughtful, informed career decisions. The article urges medical school advisers and medical librarians to work as partners in providing information on specialty and residency selection to medical students. PMID:385087

40 CFR 408.20 - Applicability; description of the conventional blue crab processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... conventional blue crab processing subcategory. 408.20 Section 408.20 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Conventional Blue Crab Processing Subcategory § 408.20 Applicability; description of the conventional blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.20 - Applicability; description of the conventional blue crab processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... conventional blue crab processing subcategory. 408.20 Section 408.20 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Conventional Blue Crab Processing Subcategory § 408.20 Applicability; description of the conventional blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.30 - Applicability; description of the mechanized blue crab processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... mechanized blue crab processing subcategory. 408.30 Section 408.30 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Mechanized Blue Crab Processing Subcategory § 408.30 Applicability; description of the mechanized blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.30 - Applicability; description of the mechanized blue crab processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... mechanized blue crab processing subcategory. 408.30 Section 408.30 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Mechanized Blue Crab Processing Subcategory § 408.30 Applicability; description of the mechanized blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.30 - Applicability; description of the mechanized blue crab processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... mechanized blue crab processing subcategory. 408.30 Section 408.30 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Mechanized Blue Crab Processing Subcategory § 408.30 Applicability; description of the mechanized blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.30 - Applicability; description of the mechanized blue crab processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... mechanized blue crab processing subcategory. 408.30 Section 408.30 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Mechanized Blue Crab Processing Subcategory § 408.30 Applicability; description of the mechanized blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.20 - Applicability; description of the conventional blue crab processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... conventional blue crab processing subcategory. 408.20 Section 408.20 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Conventional Blue Crab Processing Subcategory § 408.20 Applicability; description of the conventional blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.20 - Applicability; description of the conventional blue crab processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... conventional blue crab processing subcategory. 408.20 Section 408.20 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Conventional Blue Crab Processing Subcategory § 408.20 Applicability; description of the conventional blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.20 - Applicability; description of the conventional blue crab processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... conventional blue crab processing subcategory. 408.20 Section 408.20 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Conventional Blue Crab Processing Subcategory § 408.20 Applicability; description of the conventional blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 408.30 - Applicability; description of the mechanized blue crab processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... mechanized blue crab processing subcategory. 408.30 Section 408.30 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Mechanized Blue Crab Processing Subcategory § 408.30 Applicability; description of the mechanized blue crab processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 458.40 - Applicability; description of the carbon black lamp process subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... carbon black lamp process subcategory. 458.40 Section 458.40 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Carbon Black Lamp Process Subcategory § 458.40 Applicability; description of the carbon black lamp process subcategory. The provisions of this subpart are applicable to discharges resulting...

40 CFR 405.60 - Applicability; description of the natural and processed cheese subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... natural and processed cheese subcategory. 405.60 Section 405.60 Protection of Environment ENVIRONMENTAL... CATEGORY Natural and Processed Cheese Subcategory § 405.60 Applicability; description of the natural and processed cheese subcategory. The provisions of this subpart are applicable to discharges resulting from the...

40 CFR 405.60 - Applicability; description of the natural and processed cheese subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... natural and processed cheese subcategory. 405.60 Section 405.60 Protection of Environment ENVIRONMENTAL... CATEGORY Natural and Processed Cheese Subcategory § 405.60 Applicability; description of the natural and processed cheese subcategory. The provisions of this subpart are applicable to discharges resulting from the...

40 CFR 458.40 - Applicability; description of the carbon black lamp process subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... carbon black lamp process subcategory. 458.40 Section 458.40 Protection of Environment ENVIRONMENTAL... CATEGORY Carbon Black Lamp Process Subcategory § 458.40 Applicability; description of the carbon black lamp process subcategory. The provisions of this subpart are applicable to discharges resulting from the...

Information model construction of MES oriented to mechanical blanking workshop

NASA Astrophysics Data System (ADS)

Wang, Jin-bo; Wang, Jin-ye; Yue, Yan-fang; Yao, Xue-min

2016-11-01

Manufacturing Execution System (MES) is one of the crucial technologies to implement informatization management in manufacturing enterprises, and the construction of its information model is the base of MES database development. Basis on the analysis of the manufacturing process information in mechanical blanking workshop and the information requirement of MES every function module, the IDEF1X method was adopted to construct the information model of MES oriented to mechanical blanking workshop, and a detailed description of the data structure feature included in MES every function module and their logical relationship was given from the point of view of information relationship, which laid the foundation for the design of MES database.

IDEF5 Ontology Description Capture Method: Concepts and Formal Foundations

DTIC Science & Technology

1992-11-01

cutter comes to exist. The puzzle here goes back to Greek times iii the guise of the Ship of Theseus : if we bit by bit replace the planks of a ship...831 Barwise, J. and Perry, J., Situations and Attitudes, The MIT Press, Cambridge, 1983. [Burch 911 Burch, R., A Peircean Reduction Thesis : The

Intelligent deflection routing in buffer-less networks.

PubMed

Haeri, Soroush; Trajković, Ljiljana

2015-02-01

Deflection routing is employed to ameliorate packet loss caused by contention in buffer-less architectures such as optical burst-switched networks. The main goal of deflection routing is to successfully deflect a packet based only on a limited knowledge that network nodes possess about their environment. In this paper, we present a framework that introduces intelligence to deflection routing (iDef). iDef decouples the design of the signaling infrastructure from the underlying learning algorithm. It consists of a signaling and a decision-making module. Signaling module implements a feedback management protocol while the decision-making module implements a reinforcement learning algorithm. We also propose several learning-based deflection routing protocols, implement them in iDef using the ns-3 network simulator, and compare their performance.

40 CFR 408.270 - Applicability; description of the steamed and canned oyster processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... steamed and canned oyster processing subcategory. 408.270 Section 408.270 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Steamed and Canned Oyster Processing Subcategory § 408.270 Applicability; description of the steamed and canned oyster processing subcategory. The provisions of this subpart are...

40 CFR 408.50 - Applicability; description of the remote Alaskan crab meat processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... remote Alaskan crab meat processing subcategory. 408.50 Section 408.50 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Remote Alaskan Crab Meat Processing Subcategory § 408.50 Applicability; description of the remote Alaskan crab meat processing subcategory. The provisions of this subpart are...

40 CFR 408.50 - Applicability; description of the remote Alaskan crab meat processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... remote Alaskan crab meat processing subcategory. 408.50 Section 408.50 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Remote Alaskan Crab Meat Processing Subcategory § 408.50 Applicability; description of the remote Alaskan crab meat processing subcategory. The provisions of this subpart are...

40 CFR 408.90 - Applicability; description of the non-remote Alaskan shrimp processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-remote Alaskan shrimp processing subcategory. 408.90 Section 408.90 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Remote Alaskan Shrimp Processing Subcategory § 408.90 Applicability; description of the non-remote Alaskan shrimp processing subcategory. The provisions of this subpart are...

40 CFR 408.90 - Applicability; description of the non-remote Alaskan shrimp processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-remote Alaskan shrimp processing subcategory. 408.90 Section 408.90 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Remote Alaskan Shrimp Processing Subcategory § 408.90 Applicability; description of the non-remote Alaskan shrimp processing subcategory. The provisions of this subpart are...

40 CFR 408.190 - Applicability; description of the West Coast mechanized salmon processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Coast mechanized salmon processing subcategory. 408.190 Section 408.190 Protection of Environment... PROCESSING POINT SOURCE CATEGORY West Coast Mechanized Salmon Processing Subcategory § 408.190 Applicability; description of the West Coast mechanized salmon processing subcategory. The provisions of this subpart are...

40 CFR 408.160 - Applicability; description of the Alaskan hand-butchered salmon processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Alaskan hand-butchered salmon processing subcategory. 408.160 Section 408.160 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Hand-Butchered Salmon Processing Subcategory § 408.160 Applicability; description of the Alaskan hand-butchered salmon processing subcategory. The provisions of this subpart are...

40 CFR 408.190 - Applicability; description of the West Coast mechanized salmon processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Coast mechanized salmon processing subcategory. 408.190 Section 408.190 Protection of Environment... PROCESSING POINT SOURCE CATEGORY West Coast Mechanized Salmon Processing Subcategory § 408.190 Applicability; description of the West Coast mechanized salmon processing subcategory. The provisions of this subpart are...

40 CFR 408.160 - Applicability; description of the Alaskan hand-butchered salmon processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Alaskan hand-butchered salmon processing subcategory. 408.160 Section 408.160 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Alaskan Hand-Butchered Salmon Processing Subcategory § 408.160 Applicability; description of the Alaskan hand-butchered salmon processing subcategory. The provisions of this subpart are...

Does the FTO gene interact with the socioeconomic status on the obesity development among young European children? Results from the IDEFICS study.

PubMed

Foraita, R; Günther, F; Gwozdz, W; Reisch, L A; Russo, P; Lauria, F; Siani, A; Veidebaum, T; Tornaritis, M; Iacoviello, L; Vyncke, K; Pitsiladis, Y; Mårild, S; Molnár, D; Moreno, L A; Bammann, K; Pigeot, I

2015-01-01

Various twin studies revealed that the influence of genetic factors on psychological diseases or behaviour is more expressed in socioeconomically advantaged environments. Other studies predominantly show an inverse association between socioeconomic status (SES) and childhood obesity in Western developed countries. The aim of this study is to investigate whether the fat mass and obesity-associated (FTO) gene interacts with the SES on childhood obesity in a subsample (N = 4406) of the IDEFICS (Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS) cohort. A structural equation model (SEM) is applied with the latent constructs obesity, dietary intakes, physical activity and fitness habits, and parental SES to estimate the main effects of the latter three variables and a FTO polymorphism on childhood obesity. Further, a multiple group SEM is used to explore whether an interaction effect exists between the single nucleotide polymorphism rs9939609 within the FTO gene and SES. Significant main effects are shown for physical activity and fitness (standardised [betacrc ](s) = -0.113), SES ([betacrc ](s) = -0.057) and the FTO homozygous AA risk genotype ([betacrc ](s) = -0.177). The explained variance of obesity is ~9%. According to the multiple group approach of SEM, we see an interaction between SES and FTO with respect to their effect on childhood obesity (Δχ(2) = 7.3, df = 2, P = 0.03). Children carrying the protective FTO genotype TT seem to be more protected by a favourable social environment regarding the development of obesity than children carrying the AT or AA genotype.

40 CFR 458.10 - Applicability; description of the carbon black furnace process subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... carbon black furnace process subcategory. 458.10 Section 458.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Furnace Process Subcategory § 458.10 Applicability; description of the carbon black...

40 CFR 458.20 - Applicability: description of the carbon black thermal process subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... carbon black thermal process subcategory. 458.20 Section 458.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Thermal Process Subcategory § 458.20 Applicability: description of the carbon black...

40 CFR 458.30 - Applicability; description of the carbon black channel process subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... carbon black channel process subcategory. 458.30 Section 458.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Channel Process Subcategory § 458.30 Applicability; description of the carbon black...

22 CFR 161.8 - General description of the Department's NEPA process.

Code of Federal Regulations, 2010 CFR

2010-04-01

... § 161.8 General description of the Department's NEPA process. In reviewing proposed actions for potential environmental effects in the United States responsible action officers will follow the procedural... review the action to determine if it may cause potential significant environmental effects on the...

Application of agent-based system for bioprocess description and process improvement.

PubMed

Gao, Ying; Kipling, Katie; Glassey, Jarka; Willis, Mark; Montague, Gary; Zhou, Yuhong; Titchener-Hooker, Nigel J

2010-01-01

Modeling plays an important role in bioprocess development for design and scale-up. Predictive models can also be used in biopharmaceutical manufacturing to assist decision-making either to maintain process consistency or to identify optimal operating conditions. To predict the whole bioprocess performance, the strong interactions present in a processing sequence must be adequately modeled. Traditionally, bioprocess modeling considers process units separately, which makes it difficult to capture the interactions between units. In this work, a systematic framework is developed to analyze the bioprocesses based on a whole process understanding and considering the interactions between process operations. An agent-based approach is adopted to provide a flexible infrastructure for the necessary integration of process models. This enables the prediction of overall process behavior, which can then be applied during process development or once manufacturing has commenced, in both cases leading to the capacity for fast evaluation of process improvement options. The multi-agent system comprises a process knowledge base, process models, and a group of functional agents. In this system, agent components co-operate with each other in performing their tasks. These include the description of the whole process behavior, evaluating process operating conditions, monitoring of the operating processes, predicting critical process performance, and providing guidance to decision-making when coping with process deviations. During process development, the system can be used to evaluate the design space for process operation. During manufacture, the system can be applied to identify abnormal process operation events and then to provide suggestions as to how best to cope with the deviations. In all cases, the function of the system is to ensure an efficient manufacturing process. The implementation of the agent-based approach is illustrated via selected application scenarios, which

40 CFR 409.40 - Applicability; description of the Louisiana raw cane sugar processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Louisiana raw cane sugar processing subcategory. 409.40 Section 409.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Louisiana Raw Cane Sugar Processing Subcategory § 409.40 Applicability; description of the...

40 CFR 409.40 - Applicability; description of the Louisiana raw cane sugar processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Louisiana raw cane sugar processing subcategory. 409.40 Section 409.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Louisiana Raw Cane Sugar Processing Subcategory § 409.40 Applicability; description of the...

40 CFR 409.70 - Applicability; description of the Hawaiian raw cane sugar processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Hawaiian raw cane sugar processing subcategory. 409.70 Section 409.70 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.70 Applicability; description of the Hawaiian...

40 CFR 409.40 - Applicability; description of the Louisiana raw cane sugar processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Louisiana raw cane sugar processing subcategory. 409.40 Section 409.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Louisiana Raw Cane Sugar Processing Subcategory § 409.40 Applicability; description of the...

40 CFR 409.70 - Applicability; description of the Hawaiian raw cane sugar processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Hawaiian raw cane sugar processing subcategory. 409.70 Section 409.70 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.70 Applicability; description of the Hawaiian...

40 CFR 409.70 - Applicability; description of the Hawaiian raw cane sugar processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Hawaiian raw cane sugar processing subcategory. 409.70 Section 409.70 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.70 Applicability; description of the Hawaiian...

Intelligent tutoring systems for systems engineering methodologies

NASA Technical Reports Server (NTRS)

Meyer, Richard J.; Toland, Joel; Decker, Louis

1991-01-01

The general goal is to provide the technology required to build systems that can provide intelligent tutoring in IDEF (Integrated Computer Aided Manufacturing Definition Method) modeling. The following subject areas are covered: intelligent tutoring systems for systems analysis methodologies; IDEF tutor architecture and components; developing cognitive skills for IDEF modeling; experimental software; and PC based prototype.

40 CFR 409.40 - Applicability; description of the Louisiana raw cane sugar processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Louisiana raw cane sugar processing subcategory. 409.40 Section 409.40 Protection of Environment... CATEGORY Louisiana Raw Cane Sugar Processing Subcategory § 409.40 Applicability; description of the Louisiana raw cane sugar processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 409.70 - Applicability; description of the Hawaiian raw cane sugar processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Hawaiian raw cane sugar processing subcategory. 409.70 Section 409.70 Protection of Environment... CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.70 Applicability; description of the Hawaiian raw cane sugar processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 409.70 - Applicability; description of the Hawaiian raw cane sugar processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Hawaiian raw cane sugar processing subcategory. 409.70 Section 409.70 Protection of Environment... CATEGORY Hawaiian Raw Cane Sugar Processing Subcategory § 409.70 Applicability; description of the Hawaiian raw cane sugar processing subcategory. The provisions of this subpart are applicable to discharges...

40 CFR 409.40 - Applicability; description of the Louisiana raw cane sugar processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Louisiana raw cane sugar processing subcategory. 409.40 Section 409.40 Protection of Environment... CATEGORY Louisiana Raw Cane Sugar Processing Subcategory § 409.40 Applicability; description of the Louisiana raw cane sugar processing subcategory. The provisions of this subpart are applicable to discharges...

Kinetic and spectral descriptions of autoionization phenomena associated with atomic processes in plasmas

NASA Astrophysics Data System (ADS)

Jacobs, Verne L.

2017-06-01

This investigation has been devoted to the theoretical description and computer modeling of atomic processes giving rise to radiative emission in energetic electron and ion beam interactions and in laboratory plasmas. We are also interested in the effects of directed electron and ion collisions and of anisotropic electric and magnetic fields. In the kinetic-theory description, we treat excitation, de-excitation, ionization, and recombination in electron and ion encounters with partially ionized atomic systems, including the indirect contributions from processes involving autoionizing resonances. These fundamental collisional and electromagnetic interactions also provide particle and photon transport mechanisms. From the spectral perspective, the analysis of atomic radiative emission can reveal detailed information on the physical properties in the plasma environment, such as non-equilibrium electron and charge-state distributions as well as electric and magnetic field distributions. In this investigation, a reduced-density-matrix formulation is developed for the microscopic description of atomic electromagnetic interactions in the presence of environmental (collisional and radiative) relaxation and decoherence processes. Our central objective is a fundamental microscopic description of atomic electromagnetic processes, in which both bound-state and autoionization-resonance phenomena can be treated in a unified and self-consistent manner. The time-domain (equation-of-motion) and frequency-domain (resolvent-operator) formulations of the reduced-density-matrix approach are developed in a unified and self-consistent manner. This is necessary for our ultimate goal of a systematic and self-consistent treatment of non-equilibrium (possibly coherent) atomic-state kinetics and high-resolution (possibly overlapping) spectral-line shapes. We thereby propose the introduction of a generalized collisional-radiative atomic-state kinetics model based on a reduced

40 CFR 408.250 - Applicability; description of the Pacific Coast hand-shucked oyster processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Pacific Coast hand-shucked oyster processing subcategory. 408.250 Section 408.250 Protection of... SEAFOOD PROCESSING POINT SOURCE CATEGORY Pacific Coast Hand-Shucked Oyster Processing Subcategory § 408.250 Applicability; description of the Pacific Coast hand-shucked oyster processing subcategory. The...

40 CFR 458.40 - Applicability; description of the carbon black lamp process subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of the carbon black lamp process subcategory. 458.40 Section 458.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Lamp Process...

40 CFR 458.40 - Applicability; description of the carbon black lamp process subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of the carbon black lamp process subcategory. 458.40 Section 458.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Lamp Process...

Findings From a Nursing Care Audit Based on the Nursing Process: A Descriptive Study.

PubMed

Poortaghi, Sarieh; Salsali, Mahvash; Ebadi, Abbas; Rahnavard, Zahra; Maleki, Farzaneh

2015-09-01

Although using the nursing process improves nursing care quality, few studies have evaluated nursing performance in accordance with nursing process steps either nationally or internationally. This study aimed to audit nursing care based on a nursing process model. This was a cross-sectional descriptive study in which a nursing audit checklist was designed and validated for assessing nurses' compliance with nursing process. A total of 300 nurses from various clinical settings of Tehran university of medical sciences were selected. Data were analyzed using descriptive and inferential statistics, including frequencies, Pearson correlation coefficient and independent samples t-tests. The compliance rate of nursing process indicators was 79.71 ± 0.87. Mean compliance scores did not significantly differ by education level and gender. However, overall compliance scores were correlated with nurses' age (r = 0.26, P = 0.001) and work experience (r = 0.273, P = 0.001). Nursing process indicators can be used to audit nursing care. Such audits can be used as quality assurance tools.

Simulation Experiment Description Markup Language (SED-ML) Level 1 Version 3 (L1V3).

PubMed

Bergmann, Frank T; Cooper, Jonathan; König, Matthias; Moraru, Ion; Nickerson, David; Le Novère, Nicolas; Olivier, Brett G; Sahle, Sven; Smith, Lucian; Waltemath, Dagmar

2018-03-19

The creation of computational simulation experiments to inform modern biological research poses challenges to reproduce, annotate, archive, and share such experiments. Efforts such as SBML or CellML standardize the formal representation of computational models in various areas of biology. The Simulation Experiment Description Markup Language (SED-ML) describes what procedures the models are subjected to, and the details of those procedures. These standards, together with further COMBINE standards, describe models sufficiently well for the reproduction of simulation studies among users and software tools. The Simulation Experiment Description Markup Language (SED-ML) is an XML-based format that encodes, for a given simulation experiment, (i) which models to use; (ii) which modifications to apply to models before simulation; (iii) which simulation procedures to run on each model; (iv) how to post-process the data; and (v) how these results should be plotted and reported. SED-ML Level 1 Version 1 (L1V1) implemented support for the encoding of basic time course simulations. SED-ML L1V2 added support for more complex types of simulations, specifically repeated tasks and chained simulation procedures. SED-ML L1V3 extends L1V2 by means to describe which datasets and subsets thereof to use within a simulation experiment.

40 CFR 408.210 - Applicability; description of the non-Alaskan conventional bottom fish processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

...-Alaskan conventional bottom fish processing subcategory. 408.210 Section 408.210 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Conventional Bottom Fish Processing Subcategory § 408.210 Applicability; description of the non-Alaskan conventional bottom fish processing subcategory. The provisions of...

40 CFR 408.210 - Applicability; description of the non-Alaskan conventional bottom fish processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-Alaskan conventional bottom fish processing subcategory. 408.210 Section 408.210 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Conventional Bottom Fish Processing Subcategory § 408.210 Applicability; description of the non-Alaskan conventional bottom fish processing subcategory. The provisions of...

40 CFR 408.220 - Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-Alaskan mechanized bottom fish processing subcategory. 408.220 Section 408.220 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Mechanized Bottom Fish Processing Subcategory § 408.220 Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory. The provisions of...

40 CFR 408.210 - Applicability; description of the non-Alaskan conventional bottom fish processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-Alaskan conventional bottom fish processing subcategory. 408.210 Section 408.210 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Conventional Bottom Fish Processing Subcategory § 408.210 Applicability; description of the non-Alaskan conventional bottom fish processing subcategory. The provisions of...

40 CFR 408.210 - Applicability; description of the non-Alaskan conventional bottom fish processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-Alaskan conventional bottom fish processing subcategory. 408.210 Section 408.210 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Conventional Bottom Fish Processing Subcategory § 408.210 Applicability; description of the non-Alaskan conventional bottom fish processing subcategory. The provisions of...

40 CFR 408.220 - Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

...-Alaskan mechanized bottom fish processing subcategory. 408.220 Section 408.220 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Mechanized Bottom Fish Processing Subcategory § 408.220 Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory. The provisions of...

40 CFR 408.220 - Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-Alaskan mechanized bottom fish processing subcategory. 408.220 Section 408.220 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Mechanized Bottom Fish Processing Subcategory § 408.220 Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory. The provisions of...

40 CFR 408.220 - Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-Alaskan mechanized bottom fish processing subcategory. 408.220 Section 408.220 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Mechanized Bottom Fish Processing Subcategory § 408.220 Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory. The provisions of...

40 CFR 408.220 - Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-Alaskan mechanized bottom fish processing subcategory. 408.220 Section 408.220 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Mechanized Bottom Fish Processing Subcategory § 408.220 Applicability; description of the non-Alaskan mechanized bottom fish processing subcategory. The provisions of...

40 CFR 408.210 - Applicability; description of the non-Alaskan conventional bottom fish processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-Alaskan conventional bottom fish processing subcategory. 408.210 Section 408.210 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Alaskan Conventional Bottom Fish Processing Subcategory § 408.210 Applicability; description of the non-Alaskan conventional bottom fish processing subcategory. The provisions of...

40 CFR 408.180 - Applicability; description of the West Coast hand-butchered salmon processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Coast hand-butchered salmon processing subcategory. 408.180 Section 408.180 Protection of Environment... PROCESSING POINT SOURCE CATEGORY West Coast Hand-Butchered Salmon Processing Subcategory § 408.180 Applicability; description of the West Coast hand-butchered salmon processing subcategory. The provisions of...

40 CFR 408.180 - Applicability; description of the West Coast hand-butchered salmon processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Coast hand-butchered salmon processing subcategory. 408.180 Section 408.180 Protection of Environment... PROCESSING POINT SOURCE CATEGORY West Coast Hand-Butchered Salmon Processing Subcategory § 408.180 Applicability; description of the West Coast hand-butchered salmon processing subcategory. The provisions of...

SAVA 3: A testbed for integration and control of visual processes

NASA Technical Reports Server (NTRS)

Crowley, James L.; Christensen, Henrik

1994-01-01

The development of an experimental test-bed to investigate the integration and control of perception in a continuously operating vision system is described. The test-bed integrates a 12 axis robotic stereo camera head mounted on a mobile robot, dedicated computer boards for real-time image acquisition and processing, and a distributed system for image description. The architecture was designed to: (1) be continuously operating, (2) integrate software contributions from geographically dispersed laboratories, (3) integrate description of the environment with 2D measurements, 3D models, and recognition of objects, (4) capable of supporting diverse experiments in gaze control, visual servoing, navigation, and object surveillance, and (5) dynamically reconfiguarable.

40 CFR 408.40 - Applicability; description of the non-remote Alaskan crab meat processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

...-remote Alaskan crab meat processing subcategory. 408.40 Section 408.40 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Remote Alaskan Crab Meat Processing Subcategory § 408.40 Applicability; description of the non-remote Alaskan crab meat processing subcategory. The provisions of this subpart are...

40 CFR 408.40 - Applicability; description of the non-remote Alaskan crab meat processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

...-remote Alaskan crab meat processing subcategory. 408.40 Section 408.40 Protection of Environment... PROCESSING POINT SOURCE CATEGORY Non-Remote Alaskan Crab Meat Processing Subcategory § 408.40 Applicability; description of the non-remote Alaskan crab meat processing subcategory. The provisions of this subpart are...

Geoscience Australia Publishes Sample Descriptions using W3C standards

NASA Astrophysics Data System (ADS)

Car, N. J.; Cox, S. J. D.; Bastrakova, I.; Wyborn, L. A.

2017-12-01

The recent revision of the W3C Semantic Sensor Network Ontology (SSN) has focused on three key concerns: Extending the scope of the ontology to include sampling and actuation as well as observation and sensing Modularizing the ontology into a simple core with few classes and properties and little formal axiomatization, supplemented by additional modules that formalize the semantics and extend the scope Alignments with several existing applications and upper ontologies These enhancements mean that SSN can now be used as the basis for publishing descriptions of geologic samples as Linked Data. Geoscience Australia maintains a database of about three million samples, collected over 50 years through projects from ocean core, terrestrial rock and hydrochemistry borehole projects, almost all of which are held in in the special-purpose GA samples repository. Access to descriptions of these samples as Linked Data has recently been enabled. The sample descriptions can be viewed in various machine-readable formalizations, including IGSN (XML & RDF), Dublin Core (XML & RDF) and SSN (RDF), as well as web landing-pages for people. Of particular importance is the support for encoding relationships between samples, and between samples and surveys, boreholes, and traverses which they are related to, as well as between samples processed for analytical purposes and their parents, siblings, and back to the original field samples. The SSN extension for Sample Relationships provides an extensible, semantically rich mechanism to capture any relationship necessary to explain the provenance of observation results obtained from samples. Sample citation is facilitated through the use of URI-based persistent identifiers which resolve to samples' landing pages. The sample system also allows PROV pingbacks to be received for samples when users of them record provenance for their actions.

Food consumption and cardiovascular risk factors in European children: the IDEFICS study.

PubMed

Bel-Serrat, S; Mouratidou, T; Börnhorst, C; Peplies, J; De Henauw, S; Marild, S; Molnár, D; Siani, A; Tornaritis, M; Veidebaum, T; Krogh, V; Moreno, L A

2013-06-01

Few studies addressing the relationship between food consumption and cardiovascular disease or metabolic risk have been conducted in children. Previous findings have indicated greater metabolic risk in children with high intakes of solid hydrogenated fat and white bread, and low consumption of fruits, vegetables and dairy products. In a large multinational sample of 2 to 9 years old children, high consumption of sweetened beverages and low intake of nuts and seeds, sweets, breakfast cereals, jam and honey and chocolate and nut-based spreads were directly associated with increased clustered cardiovascular disease risk. These findings add new evidence to the limited literature available in young populations on the role that diet may play on cardiovascular health. To investigate food consumption in relation to clustered cardiovascular disease (CVD) risk. Children (n = 5548, 51.6% boys) from eight European countries participated in the IDEFICS study baseline survey (2007-2008). Z-scores of individual CVD risk factors were summed to compute sex- and age-specific (2-<6 years/6-9 years) clustered CVD risk scores A (all components, except cardiorespiratory fitness) and B (all components). The association of clustered CVD risk and tertiles of food group consumption was examined. Odds ratio (OR) of having clustered CVD risk A increased in older children with higher consumption of chocolate and nut-based spreads (boys: OR = 0.46; 95% CI = 0.32-0.69; girls: OR = 0.60; 95% CI = 0.42-0.86), jam and honey (girls: OR = 0.45; 95% CI = 0.26-0.78) and sweets (boys: OR = 0.69; 95% CI = 0.48-0.98). OR of being at risk significantly increased with the highest consumption of soft drinks (younger boys) and manufactured juices (older girls). Concerning CVD risk score B, older boys and girls in the highest tertile of consumption of breakfast cereals were 0.41 (95% CI = 0.21-0.79) and 0.45 (95% CI = 0.22-0.93) times, respectively, less likely

Timing of solid food introduction and association with later childhood overweight and obesity: The IDEFICS study.

PubMed

Papoutsou, Stalo; Savva, Savvas C; Hunsberger, Monica; Jilani, Hannah; Michels, Nathalie; Ahrens, Wolfgang; Tornaritis, Michael; Veidebaum, Toomas; Molnár, Dénes; Siani, Alfonso; Moreno, Luis A; Hadjigeorgiou, Charis

2018-01-01

This study investigated associations between timing of solid food introduction and childhood obesity and explored maternal characteristics influencing early feeding practices. Cross-sectional data from children 2-9 years (n = 10,808; 50.5% boys) residing in 8 European countries of the IDEFICS study (2007-2008) were included. Late solid food introduction (≥7 months of age) was associated with an increased prevalence of later childhood overweight/obesity among exclusively breastfed children (OR [odds ratio]: 1.38, 95% CI [confidence interval] [1.01, 1.88]). In contrast, early solid food introduction (<4 months of age) was associated with lower prevalence of overweight/obesity among children that ceased exclusive breastfeeding earlier than 4 months (OR: 0.63, 95% CI [0.47, 0.84]). Children that were introduced to solids right after 6 months exclusive breastfeeding and continued to receive breastmilk (≥12 months) were less likely to become overweight/obese (OR: 0.67, 95% CI [0.51, 0.88]) compared to children that discontinued to receive breastmilk. Analyses were adjusted for age, sex, country, birth weight, parental education level, parental body mass index, tobacco use in pregnancy, gestational weight gain, and gestational diabetes. Underweight mothers, overweight mothers, mothers who reported daily smoking during pregnancy, and low-educated mothers were less likely to follow recommendations on breastfeeding and timely solids introduction. Future studies should examine whether guidelines for solid food introduction timing have to distinguish between exclusively breastfed, formula fed, and too early exclusive breastfeeding-ceased infants. There is also need for more prospective studies; recall bias was an important current limitation. In conclusion, health professionals should emphasize benefits of breastfeeding and appropriate solid food introduction, especially to mothers that are less likely to follow recommendations. © 2017 John Wiley & Sons Ltd.

40 CFR 406.60 - Applicability; description of the parboiled rice processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the parboiled rice processing subcategory. 406.60 Section 406.60 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Parboiled...

Validity of hip-mounted uniaxial accelerometry with heart-rate monitoring vs. triaxial accelerometry in the assessment of free-living energy expenditure in young children: the IDEFICS Validation Study.

PubMed

Ojiambo, Robert; Konstabel, Kenn; Veidebaum, Toomas; Reilly, John; Verbestel, Vera; Huybrechts, Inge; Sioen, Isabelle; Casajús, José A; Moreno, Luis A; Vicente-Rodriguez, German; Bammann, Karin; Tubic, Bojan M; Marild, Staffan; Westerterp, Klaas; Pitsiladis, Yannis P

2012-11-01

One of the aims of Identification and Prevention of Dietary- and Lifestyle-Induced Health Effects in Children and Infants (IDEFICS) validation study is to validate field measures of physical activity (PA) and energy expenditure (EE) in young children. This study compared the validity of uniaxial accelerometry with heart-rate (HR) monitoring vs. triaxial accelerometry against doubly labeled water (DLW) criterion method for assessment of free-living EE in young children. Forty-nine European children (25 female, 24 male) aged 4-10 yr (mean age: 6.9 ± 1.5 yr) were assessed by uniaxial ActiTrainer with HR, uniaxial 3DNX, and triaxial 3DNX accelerometry. Total energy expenditure (TEE) was estimated using DLW over a 1-wk period. The longitudinal axis of both devices and triaxial 3DNX counts per minute (CPM) were significantly (P < 0.05) associated with physical activity level (PAL; r = 0.51 ActiTrainer, r = 0.49 uniaxial-3DNX, and r = 0.42 triaxial Σ3DNX). Eight-six percent of the variance in TEE could be predicted by a model combining body mass (partial r(2) = 71%; P < 0.05), CPM-ActiTrainer (partial r(2) = 11%; P < 0.05), and difference between HR at moderate and sedentary activities (ModHR - SedHR) (partial r(2) = 4%; P < 0.05). The SE of TEE estimate for ActiTrainer and 3DNX models ranged from 0.44 to 0.74 MJ/days or ∼7-11% of the average TEE. The SE of activity-induced energy expenditure (AEE) model estimates ranged from 0.38 to 0.57 MJ/day or 24-26% of the average AEE. It is concluded that the comparative validity of hip-mounted uniaxial and triaxial accelerometers for assessing PA and EE is similar.

Bidirectional associations between psychosocial well-being and adherence to healthy dietary guidelines in European children: prospective findings from the IDEFICS study.

PubMed

Arvidsson, Louise; Eiben, Gabriele; Hunsberger, Monica; De Bourdeaudhuij, Ilse; Molnar, Denes; Jilani, Hannah; Thumann, Barbara; Veidebaum, Toomas; Russo, Paola; Tornatitis, Michael; Santaliestra-Pasías, Alba M; Pala, Valeria; Lissner, Lauren

2017-12-14

In children the relationship between a healthy diet and psychosocial well-being has not been fully explored and the existing evidence is inconsistent. This study investigates the chronology of the association between children's adherence to healthy dietary guidelines and their well-being, with special attention to the influence of weight status on the association. Seven thousand six hundred seventy five children 2 to 9 years old from the eight-country cohort study IDEFICS were investigated. They were first examined between September 2007 and June 2008 and re-examined again 2 years later. Psychosocial well-being was measured using self-esteem and parent relations questions from the KINDL® and emotional and peer problems from the Strengths and Difficulties Questionnaire. A Healthy Dietary Adherence Score (HDAS) was calculated from a 43-item food frequency questionnaire as a measure of the degree to which children's dietary intake follows nutrition guidelines. The analysis employed multilevel logistic regression (country as random effect) with bidirectional modeling of dichotomous dietary and well-being variables as both exposures and outcomes while controlling for respective baseline values. A higher HDAS at baseline was associated with better self-esteem (OR 1.2, 95% CI 1.0;1.4) and fewer emotional and peer problems (OR 1.2, 95% CI 1.1;1.3 and OR 1.3, 95% CI 1.2;1.4) 2 years later. For the reversed direction, better self-esteem was associated with higher HDAS 2 years later (OR 1.1 95% CI 1.0;1.29). The analysis stratified by weight status revealed that the associations between higher HDAS at baseline and better well-being at follow-up were similar in both normal weight and overweight children. Present findings suggest a bidirectional relation between diet quality and self-esteem. Additionally, higher adherence to healthy dietary guidelines at baseline was associated with fewer emotional and peer problems at follow-up, independent of children's weight status.

Fast Quantum Algorithm for Predicting Descriptive Statistics of Stochastic Processes

NASA Technical Reports Server (NTRS)

Williams Colin P.

1999-01-01

Stochastic processes are used as a modeling tool in several sub-fields of physics, biology, and finance. Analytic understanding of the long term behavior of such processes is only tractable for very simple types of stochastic processes such as Markovian processes. However, in real world applications more complex stochastic processes often arise. In physics, the complicating factor might be nonlinearities; in biology it might be memory effects; and in finance is might be the non-random intentional behavior of participants in a market. In the absence of analytic insight, one is forced to understand these more complex stochastic processes via numerical simulation techniques. In this paper we present a quantum algorithm for performing such simulations. In particular, we show how a quantum algorithm can predict arbitrary descriptive statistics (moments) of N-step stochastic processes in just O(square root of N) time. That is, the quantum complexity is the square root of the classical complexity for performing such simulations. This is a significant speedup in comparison to the current state of the art.

Findings From a Nursing Care Audit Based on the Nursing Process: A Descriptive Study

PubMed Central

Poortaghi, Sarieh; Salsali, Mahvash; Ebadi, Abbas; Rahnavard, Zahra; Maleki, Farzaneh

2015-01-01

Background: Although using the nursing process improves nursing care quality, few studies have evaluated nursing performance in accordance with nursing process steps either nationally or internationally. Objectives: This study aimed to audit nursing care based on a nursing process model. Patients and Methods: This was a cross-sectional descriptive study in which a nursing audit checklist was designed and validated for assessing nurses’ compliance with nursing process. A total of 300 nurses from various clinical settings of Tehran university of medical sciences were selected. Data were analyzed using descriptive and inferential statistics, including frequencies, Pearson correlation coefficient and independent samples t-tests. Results: The compliance rate of nursing process indicators was 79.71 ± 0.87. Mean compliance scores did not significantly differ by education level and gender. However, overall compliance scores were correlated with nurses’ age (r = 0.26, P = 0.001) and work experience (r = 0.273, P = 0.001). Conclusions: Nursing process indicators can be used to audit nursing care. Such audits can be used as quality assurance tools. PMID:26576448

40 CFR 409.80 - Applicability; description of the Puerto Rican raw cane sugar processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Puerto Rican raw cane sugar processing subcategory. 409.80 Section 409.80 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.80 Applicability; description of the...

40 CFR 409.80 - Applicability; description of the Puerto Rican raw cane sugar processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Puerto Rican raw cane sugar processing subcategory. 409.80 Section 409.80 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.80 Applicability; description of the...

40 CFR 409.80 - Applicability; description of the Puerto Rican raw cane sugar processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Puerto Rican raw cane sugar processing subcategory. 409.80 Section 409.80 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.80 Applicability; description of the...

Behavior Models for Software Architecture

DTIC Science & Technology

2014-11-01

MP. Existing process modeling frameworks (BPEL, BPMN [Grosskopf et al. 2009], IDEF) usually follow the “single flowchart” paradigm. MP separates...Process: Business Process Modeling using BPMN , Meghan Kiffer Press. HAREL, D., 1987, A Visual Formalism for Complex Systems. Science of Computer

40 CFR 409.80 - Applicability; description of the Puerto Rican raw cane sugar processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Puerto Rican raw cane sugar processing subcategory. 409.80 Section 409.80 Protection of Environment... CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.80 Applicability; description of the Puerto Rican raw cane sugar processing subcategory. The provisions of this subpart are applicable to...

40 CFR 409.80 - Applicability; description of the Puerto Rican raw cane sugar processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Puerto Rican raw cane sugar processing subcategory. 409.80 Section 409.80 Protection of Environment... CATEGORY Puerto Rican Raw Cane Sugar Processing Subcategory § 409.80 Applicability; description of the Puerto Rican raw cane sugar processing subcategory. The provisions of this subpart are applicable to...

Baseline process description for simulating plutonium oxide production for precalc project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pike, J. A.

Savannah River National Laboratory (SRNL) started a multi-year project, the PreCalc Project, to develop a computational simulation of a plutonium oxide (PuO 2) production facility with the objective to study the fundamental relationships between morphological and physicochemical properties. This report provides a detailed baseline process description to be used by SRNL personnel and collaborators to facilitate the initial design and construction of the simulation. The PreCalc Project team selected the HB-Line Plutonium Finishing Facility as the basis for a nominal baseline process since the facility is operational and significant model validation data can be obtained. The process boundary as wellmore » as process and facility design details necessary for multi-scale, multi-physics models are provided.« less

A comparison of BPMN 2.0 with other notations for manufacturing processes

NASA Astrophysics Data System (ADS)

García-Domínguez, A.; Marcos, Mariano; Medina, I.

2012-04-01

In order to study their current practices and improve on them, manufacturing firms need to view their processes from several viewpoints at various abstraction levels. Several notations have been developed for this purpose, such as Value Stream Mappings or IDEF models. More recently, the BPMN 2.0 standard from the Object Management Group has been proposed for modeling business processes. A process organizes several activities (manual or automatic) into a single higher-level entity, which can be reused elsewhere in the organization. Its potential for standardizing business interactions is well-known, but there is little work on using BPMN 2.0 to model manufacturing processes. In this work some of the previous notations are outlined and BPMN 2.0 is positioned among them after discussing it in more depth. Some guidelines on using BPMN 2.0 for manufacturing are offered, and its advantages and disadvantages in comparison with the other notations are presented.

40 CFR 408.130 - Applicability; description of the breaded shrimp processing in the contiguous States subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... breaded shrimp processing in the contiguous States subcategory. 408.130 Section 408.130 Protection of... SEAFOOD PROCESSING POINT SOURCE CATEGORY Breaded Shrimp Processing in the Contiguous States Subcategory § 408.130 Applicability; description of the breaded shrimp processing in the contiguous States...

40 CFR 408.130 - Applicability; description of the breaded shrimp processing in the contiguous States subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... breaded shrimp processing in the contiguous States subcategory. 408.130 Section 408.130 Protection of... SEAFOOD PROCESSING POINT SOURCE CATEGORY Breaded Shrimp Processing in the Contiguous States Subcategory § 408.130 Applicability; description of the breaded shrimp processing in the contiguous States...

40 CFR 408.110 - Applicability; description of the Northern shrimp processing in the contiguous States subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Northern shrimp processing in the contiguous States subcategory. 408.110 Section 408.110 Protection of... SEAFOOD PROCESSING POINT SOURCE CATEGORY Northern Shrimp Processing in the Contiguous States Subcategory § 408.110 Applicability; description of the Northern shrimp processing in the contiguous States...

40 CFR 408.110 - Applicability; description of the Northern shrimp processing in the contiguous States subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Northern shrimp processing in the contiguous States subcategory. 408.110 Section 408.110 Protection of... SEAFOOD PROCESSING POINT SOURCE CATEGORY Northern Shrimp Processing in the Contiguous States Subcategory § 408.110 Applicability; description of the Northern shrimp processing in the contiguous States...

Percentiles of fasting serum insulin, glucose, HbA1c and HOMA-IR in pre-pubertal normal weight European children from the IDEFICS cohort.

PubMed

Peplies, J; Jiménez-Pavón, D; Savva, S C; Buck, C; Günther, K; Fraterman, A; Russo, P; Iacoviello, L; Veidebaum, T; Tornaritis, M; De Henauw, S; Mårild, S; Molnár, D; Moreno, L A; Ahrens, W

2014-09-01

The aim of this study is to present age- and sex-specific reference values of insulin, glucose, glycosylated haemoglobin (HbA1c) and the homeostasis model assessment to quantify insulin resistance (HOMA-IR) for pre-pubertal children. The reference population consists of 7074 normal weight 3- to 10.9-year-old pre-pubertal children from eight European countries who participated in at least one wave of the IDEFICS ('identification and prevention of dietary- and lifestyle-induced health effects in children and infants') surveys (2007-2010) and for whom standardised laboratory measurements were obtained. Percentile curves of insulin (measured by an electrochemiluminescence immunoassay), glucose, HbA1c and HOMA-IR were calculated as a function of age stratified by sex using the general additive model for location scale and shape (GAMLSS) method. Levels of insulin, fasting glucose and HOMA-IR continuously show an increasing trend with age, whereas HbA1c shows an upward trend only beyond the age of 8 years. Insulin and HOMA-IR values are higher in girls of all age groups, whereas glucose values are slightly higher in boys. Median serum levels of insulin range from 17.4 and 13.2 pmol l(-1) in 3-<3.5-year-old girls and boys, respectively, to 53.5 and 43.0 pmol l(-1) in 10.5-<11-year-old girls and boys. Median values of glucose are 4.3 and 4.5 mmol l(-1) in the youngest age group and 49.3 and 50.6 mmol l(-1) in the oldest girls and boys. For HOMA-IR, median values range from 0.5 and 0.4 in 3-<3.5-year-old girls and boys to 1.7 and 1.4 in 10.5-<11-year-old girls and boys, respectively. Our study provides the first standardised reference values for an international European children's population and provides the, up to now, largest data set of healthy pre-pubertal children to model reference percentiles for markers of insulin resistance. Our cohort shows higher values of Hb1Ac as compared with a single Swedish study while our percentiles for the other glucose

Synchronous meteorological satellite system description document, volume 3

NASA Technical Reports Server (NTRS)

Pipkin, F. B.

1971-01-01

The structural design, analysis, and mechanical integration of the synchronous meteorological satellite system are presented. The subjects discussed are: (1) spacecraft configuration, (2) structural design, (3) static load tests, (4) fixed base sinusoidal vibration survey, (5) flight configuration sinusoidal vibration tests, (6) spacecraft acoustic test, and (7) separation and shock test. Descriptions of the auxiliary propulsion subsystem, the apogee boost motor, communications system, and thermal control subsystem are included.

Dynamical description of the fission process using the TD-BCS theory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Scamps, Guillaume, E-mail: scamps@nucl.phys.tohoku.ac.jp; Simenel, Cédric; Lacroix, Denis

2015-10-15

The description of fission remains a challenge for nuclear microscopic theories. The time-dependent Hartree-Fock approach with BCS pairing is applied to study the last stage of the fission process. A good agreement is found for the one-body observables: the total kinetic energy and the average mass asymmetry. The non-physical dependence of two-body observables with the initial shape is discussed.

40 CFR 408.260 - Applicability; description of the Atlantic and Gulf Coast hand-shucked oyster processing...

Code of Federal Regulations, 2010 CFR

2010-07-01

... Atlantic and Gulf Coast hand-shucked oyster processing subcategory. 408.260 Section 408.260 Protection of... SEAFOOD PROCESSING POINT SOURCE CATEGORY Atlantic and Gulf Coast Hand-Shucked Oyster Processing Subcategory § 408.260 Applicability; description of the Atlantic and Gulf Coast hand-shucked oyster processing...

Migrant Background and Weight Gain in Early Infancy: Results from the German Study Sample of the IDEFICS Study

PubMed Central

Reeske, Anna; Spallek, Jacob; Bammann, Karin; Eiben, Gabriele; De Henauw, Stefaan; Kourides, Yiannis; Nagy, Peter; Ahrens, Wolfgang

2013-01-01

Objective To examine variations in infant weight gain between children of parents with and without migrant background and to investigate how these differences are explained by pre- and perinatal factors. Methods We used data on birth weight and weight at six months from well-child check-up books that were collected from a population-based German sample of children in the IDEFICS study (n = 1,287). We calculated unadjusted and adjusted means for weight z-scores at birth and six months later. We applied linear regression for change in weight z-score and we calculated odds ratios and 95% confidence intervals (95% CI) for rapid weight gain by logistic regression, adjusted for biological, social and behavioural factors. Results Weight z-scores for migrants and Germans differed slightly at birth, but were markedly increased for Turkish and Eastern European infants at age six months. Turkish infants showed the highest change in weight z-score during the first 6 months (ß = 0.35; 95% CI 0.14–0.56) and an increased probability of rapid weight gain compared with German infants. Examination of the joint effect of migrant and socioeconomic status (SES) showed the greatest change in weight z-scores in Turkish infants from middle SES families (ß = 0.77; 95% CI 0.40–1.14) and infants of parents from Eastern European countries with high SES (ß = 0.72; 95% CI 0.13–1.32). Conclusions Our results support the hypothesis that migrant background is an independent risk factor for infant weight gain and suggest that the onset of health inequalities in overweight starts in early infancy. PMID:23593270

Socioeconomic factors and childhood overweight in Europe: results from the multi-centre IDEFICS study.

PubMed

Bammann, K; Gwozdz, W; Lanfer, A; Barba, G; De Henauw, S; Eiben, G; Fernandez-Alvira, J M; Kovács, E; Lissner, L; Moreno, L A; Tornaritis, M; Veidebaum, T; Pigeot, I

2013-02-01

What is already known about this subject Overweight and obesity can be linked to different parental socioeconomic factors already in very young children. In Western developed countries, the association of childhood overweight and obesity and parental socioeconomic status shows a negative gradient. Ambiguous results have been obtained regarding the association between socioeconomic factors and childhood overweight and obesity in different countries and over time. What this study adds European regions show heterogeneous associations between socioeconomic factors and overweight and obesity in a multi-centre study with highly standardized study protocol. The strength of association between SES and overweight and obesity varies across European regions. In our study, the SES gradient is correlated with the regional mean income and the country-specific Human development index indicating a strong influence not only of the family but also of region and country on the overweight and obesity prevalence. To assess the association between different macro- and micro-level socioeconomic factors and childhood overweight. Data from the IDEFICS baseline survey is used to investigate the cross-sectional association between socioeconomic factors, like socioeconomic status (SES), and the prevalence of childhood overweight. Differences and similarities regarding this relationship in eight European regions (located in Belgium, Cyprus, Estonia, Germany, Hungary, Italy, Spain and Sweden) are explored. 11 994 children (50.9% boys, 49.1% girls) and their parents were included in the analyses. In five of the eight investigated regions (in Belgium, Estonia, Germany, Spain and Sweden), the prevalence of childhood overweight followed an inverse SES gradient. In the other three regions (in Cyprus, Hungary and Italy), no association between SES and childhood overweight was found. The SES-overweight association in a region was best explained by the country-specific human development index and the

The Analysis of Rush Orders Risk in Supply Chain: A Simulation Approach

NASA Technical Reports Server (NTRS)

Mahfouz, Amr; Arisha, Amr

2011-01-01

Satisfying customers by delivering demands at agreed time, with competitive prices, and in satisfactory quality level are crucial requirements for supply chain survival. Incidence of risks in supply chain often causes sudden disruptions in the processes and consequently leads to customers losing their trust in a company's competence. Rush orders are considered to be one of the main types of supply chain risks due to their negative impact on the overall performance, Using integrated definition modeling approaches (i.e. IDEF0 & IDEF3) and simulation modeling technique, a comprehensive integrated model has been developed to assess rush order risks and examine two risk mitigation strategies. Detailed functions sequence and objects flow were conceptually modeled to reflect on macro and micro levels of the studied supply chain. Discrete event simulation models were then developed to assess and investigate the mitigation strategies of rush order risks, the objective of this is to minimize order cycle time and cost.

3. Photocopied October 1976, from Theoph Schramke, Description of the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. Photocopied October 1976, from Theoph Schramke, Description of the New York Croton Aqueduct, New York: New York, 1843. PLATE VI, SING SING KILL BRIDGE. - Old Croton Aqueduct, Sing Sing Kill Bridge, Spanning Aqueduct Street & Broadway, Ossining, Westchester County, NY

Does physics instruction foster university students' cognitive processes?: A descriptive study of teacher activities

NASA Astrophysics Data System (ADS)

Ferguson-Hessler, Monica G. M.; de Jong, Ton

This study aims at giving a systematic description of the cognitive activities involved in teaching physics. Such a description of instruction in physics requires a basis in two models, that is, the cognitive activities involved in learning physics and the knowledge base that is the foundation of expertise in that subject. These models have been provided by earlier research. The model of instruction distinguishes three main categories of instruction process: presenting new information, integrating (i.e., bringing structure into) new knowledge, and connecting elements of new knowledge to prior knowledge. Each of the main categories has been divided into a number of specific instruction processes. Hereby any limited and specific cognitive teacher activity can be described along the two dimensions of process and type of knowledge. The model was validated by application to lectures and problem-solving classes of first year university courses. These were recorded and analyzed as to instruction process and type of knowledge. Results indicate that teachers are indeed involved in the various types of instruction processes defined. The importance of this study lies in the creation of a terminology that makes it possible to discuss instruction in an explicit and specific way.

40 CFR 409.50 - Applicability; description of the Florida and Texas raw cane sugar processing subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Florida and Texas raw cane sugar processing subcategory. 409.50 Section 409.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.50 Applicability; description of the...

40 CFR 409.50 - Applicability; description of the Florida and Texas raw cane sugar processing subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Florida and Texas raw cane sugar processing subcategory. 409.50 Section 409.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.50 Applicability; description of the...

40 CFR 409.50 - Applicability; description of the Florida and Texas raw cane sugar processing subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Florida and Texas raw cane sugar processing subcategory. 409.50 Section 409.50 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SUGAR PROCESSING POINT SOURCE CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.50 Applicability; description of the...

40 CFR 458.20 - Applicability: description of the carbon black thermal process subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability: description of the carbon black thermal process subcategory. 458.20 Section 458.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Thermal...

40 CFR 458.10 - Applicability; description of the carbon black furnace process subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of the carbon black furnace process subcategory. 458.10 Section 458.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Furnace...

40 CFR 458.30 - Applicability; description of the carbon black channel process subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of the carbon black channel process subcategory. 458.30 Section 458.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Channel...

40 CFR 458.10 - Applicability; description of the carbon black furnace process subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of the carbon black furnace process subcategory. 458.10 Section 458.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Furnace...

40 CFR 458.20 - Applicability: description of the carbon black thermal process subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability: description of the carbon black thermal process subcategory. 458.20 Section 458.20 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Thermal...

40 CFR 458.30 - Applicability; description of the carbon black channel process subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of the carbon black channel process subcategory. 458.30 Section 458.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS (CONTINUED) CARBON BLACK MANUFACTURING POINT SOURCE CATEGORY Carbon Black Channel...

Vehicle Modeling for use in the CAFE model: Process description and modeling assumptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moawad, Ayman; Kim, Namdoo; Rousseau, Aymeric

2016-06-01

The objective of this project is to develop and demonstrate a process that, at a minimum, provides more robust information that can be used to calibrate inputs applicable under the CAFE model’s existing structure. The project will be more fully successful if a process can be developed that minimizes the need for decision trees and replaces the synergy factors by inputs provided directly from a vehicle simulation tool. The report provides a description of the process that was developed by Argonne National Laboratory and implemented in Autonomie.

Correcting Inadequate Model Snow Process Descriptions Dramatically Improves Mountain Hydrology Simulations

NASA Astrophysics Data System (ADS)

Pomeroy, J. W.; Fang, X.

2014-12-01

The vast effort in hydrology devoted to parameter calibration as a means to improve model performance assumes that the models concerned are not fundamentally wrong. By focussing on finding optimal parameter sets and ascribing poor model performance to parameter or data uncertainty, these efforts may fail to consider the need to improve models with more intelligent descriptions of hydrological processes. To test this hypothesis, a flexible physically based hydrological model including a full suite of snow hydrology processes as well as warm season, hillslope and groundwater hydrology was applied to Marmot Creek Research Basin, Canadian Rocky Mountains where excellent driving meteorology and basin biophysical descriptions exist. Model parameters were set from values found in the basin or from similar environments; no parameters were calibrated. The model was tested against snow surveys and streamflow observations. The model used algorithms that describe snow redistribution, sublimation and forest canopy effects on snowmelt and evaporative processes that are rarely implemented in hydrological models. To investigate the contribution of these processes to model predictive capability, the model was "falsified" by deleting parameterisations for forest canopy snow mass and energy, blowing snow, intercepted rain evaporation, and sublimation. Model falsification by ignoring forest canopy processes contributed to a large increase in SWE errors for forested portions of the research basin with RMSE increasing from 19 to 55 mm and mean bias (MB) increasing from 0.004 to 0.62. In the alpine tundra portion, removing blowing processes resulted in an increase in model SWE MB from 0.04 to 2.55 on north-facing slopes and -0.006 to -0.48 on south-facing slopes. Eliminating these algorithms degraded streamflow prediction with the Nash Sutcliffe efficiency dropping from 0.58 to 0.22 and MB increasing from 0.01 to 0.09. These results show dramatic model improvements by including snow

40 CFR 409.50 - Applicability; description of the Florida and Texas raw cane sugar processing subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Florida and Texas raw cane sugar processing subcategory. 409.50 Section 409.50 Protection of Environment... CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.50 Applicability; description of the Florida and Texas raw cane sugar processing subcategory. The provisions of this subpart are applicable to...

40 CFR 409.50 - Applicability; description of the Florida and Texas raw cane sugar processing subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Florida and Texas raw cane sugar processing subcategory. 409.50 Section 409.50 Protection of Environment... CATEGORY Florida and Texas Raw Cane Sugar Processing Subcategory § 409.50 Applicability; description of the Florida and Texas raw cane sugar processing subcategory. The provisions of this subpart are applicable to...

Computing biological functions using BioΨ, a formal description of biological processes based on elementary bricks of actions

PubMed Central

Pérès, Sabine; Felicori, Liza; Rialle, Stéphanie; Jobard, Elodie; Molina, Franck

2010-01-01

Motivation: In the available databases, biological processes are described from molecular and cellular points of view, but these descriptions are represented with text annotations that make it difficult to handle them for computation. Consequently, there is an obvious need for formal descriptions of biological processes. Results: We present a formalism that uses the BioΨ concepts to model biological processes from molecular details to networks. This computational approach, based on elementary bricks of actions, allows us to calculate on biological functions (e.g. process comparison, mapping structure–function relationships, etc.). We illustrate its application with two examples: the functional comparison of proteases and the functional description of the glycolysis network. This computational approach is compatible with detailed biological knowledge and can be applied to different kinds of systems of simulation. Availability: www.sysdiag.cnrs.fr/publications/supplementary-materials/BioPsi_Manager/ Contact: sabine.peres@sysdiag.cnrs.fr; franck.molina@sysdiag.cnrs.fr Supplementary information: Supplementary data are available at Bioinformatics online. PMID:20448138

Extraction of phenotypic traits from taxonomic descriptions for the tree of life using natural language processing.

PubMed

Endara, Lorena; Cui, Hong; Burleigh, J Gordon

2018-03-01

Phenotypic data sets are necessary to elucidate the genealogy of life, but assembling phenotypic data for taxa across the tree of life can be technically challenging and prohibitively time consuming. We describe a semi-automated protocol to facilitate and expedite the assembly of phenotypic character matrices of plants from formal taxonomic descriptions. This pipeline uses new natural language processing (NLP) techniques and a glossary of over 9000 botanical terms. Our protocol includes the Explorer of Taxon Concepts (ETC), an online application that assembles taxon-by-character matrices from taxonomic descriptions, and MatrixConverter, a Java application that enables users to evaluate and discretize the characters extracted by ETC. We demonstrate this protocol using descriptions from Araucariaceae. The NLP pipeline unlocks the phenotypic data found in taxonomic descriptions and makes them usable for evolutionary analyses.

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2011 CFR

2011-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2010 CFR

2010-10-01

... description per calendar quarter, either during prime time or on children's programming; (2) Television... technical capability necessary to pass through the video description, unless using the technology for... video description per calendar quarter during prime time or on children's programming, on each channel...

49 CFR 510.3 - Compulsory process, the service thereof, claims for confidential treatment, and terms of compliance.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Compulsory process, the service thereof, claims... OF TRANSPORTATION INFORMATION GATHERING POWERS § 510.3 Compulsory process, the service thereof... description of the documents or things to be produced. (c) Service of the compulsory processes specified in...

Dietary Carbohydrate and Nocturnal Sleep Duration in Relation to Children's BMI: Findings from the IDEFICS Study in Eight European Countries.

PubMed

Hunsberger, Monica; Mehlig, Kirsten; Börnhorst, Claudia; Hebestreit, Antje; Moreno, Luis; Veidebaum, Toomas; Kourides, Yiannis; Siani, Alfonso; Molnar, Dénes; Sioen, Isabelle; Lissner, Lauren

2015-12-08

Previous research has found an association between being overweight and short sleep duration. We hypothesized that this association could be modified by a high carbohydrate (HC) diet and that the timing and type (starch or sugar) of intake may be an important factor in this context. Participants in the prospective, eight-country European study IDEFICS were recruited from September 2007 to June 2008, when they were aged two to nine years. Data on lifestyle, dietary intake and anthropometry were collected on two occasions. This study included 5944 children at baseline and 4301 at two-year follow-up. For each meal occasion (morning, midday, and evening), starch in grams and sugar in grams were divided by total energy intake (EI), and quartiles calculated. HC-starch and HC-sugar intake categories were defined as the highest quartile for each meal occasion. In a mutually adjusted linear regression model, short sleep duration as well as HC-starch in the morning were positively associated with body mass index (BMI) z-scores at baseline. HC-starch at midday was positively associated with body mass index (BMI) z-scores in children with short sleep duration, and negatively associated with BMI z-scores in those with normal sleep. After adjustment for baseline BMI z-scores, associations between total HC from starch or sugar and high BMI z-scores at two-year follow-up did not persist. Our observations offer a perspective on optimal timing for macronutrient consumption, which is known to be influenced by circadian rhythms. Reduced carbohydrate intake, especially during morning and midday meals, and following nocturnal sleep duration recommendations are two modifiable factors that may protect children from being overweight in the future.

Preservice Elementary Teachers Increase Descriptive Science Vocabulary by Making Descriptive Adjective Object Boxes

ERIC Educational Resources Information Center

Rule, Audrey C.; Crisafulli, Sherry; DeCare, Heather; DeLeo, Tonya; Eastman, Keri; Farrell, Liz; Geblein, Jennifer; Gioia, Chelsea; Joyce, Ashley; Killian, Kali; Knoop, Kelly; LaRocca, Alison; Meyer, Katie; Miller, Julianne; Roth, Vicki; Throo, Julie; Van Arsdale, Jim; Walker, Malissa

2007-01-01

Descriptive vocabulary is needed for communication and mental processing of science observations. Elementary preservice teachers in a science methods class at a mid-sized public college in central New York State increased their descriptive vocabularies through a course assignment of making a descriptive adjective object box. This teaching material…

14 CFR 1-3 - General description of system of accounts and reports.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 14 Aeronautics and Space 4 2012-01-01 2012-01-01 false General description of system of accounts and reports. Sec. 1-3 Section Sec. 1-3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... reports. (a) This system of accounts and reports is designed to permit limited contraction or expansion to...

7 CFR 52.3751 - Product description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Product description. 52.3751 Section 52.3751... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Canned Ripe Olives 1 Product Description...

7 CFR 52.3181 - Product description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Product description. 52.3181 Section 52.3181... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Dried Prunes Product Description, Varietal...

7 CFR 52.1001 - Product description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Product description. 52.1001 Section 52.1001... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Dates Product Description, Styles, and...

Concept for a Satellite-Based Advanced Air Traffic Management System : Volume 3. Subsystem Functional Description.

DOT National Transportation Integrated Search

1974-02-01

The volume presents a detailed description of the subsystems that comprise the Satellite-Based Advanced Air Traffic Management System. Described in detail are the surveillance, navigation, communications, data processing, and airport subsystems. The ...

Mediterranean diet, overweight and body composition in children from eight European countries: cross-sectional and prospective results from the IDEFICS study.

PubMed

Tognon, G; Hebestreit, A; Lanfer, A; Moreno, L A; Pala, V; Siani, A; Tornaritis, M; De Henauw, S; Veidebaum, T; Molnár, D; Ahrens, W; Lissner, L

2014-02-01

A Mediterranean-like dietary pattern has been shown to be inversely associated with many diseases, but its role in early obesity prevention is not clear. We aimed to determine if this pattern is common among European children and whether it is associated with overweight and obesity. The IDEFICS study recruited 16,220 children aged 2-9 years from study centers in eight European countries. Weight, height, waist circumference, and skinfolds were measured at baseline and in 9114 children of the original cohort after two years. Diet was evaluated by a parental questionnaire reporting children's usual consumption of 43 food items. Adherence to a Mediterranean-like diet was calculated by a food frequency-based Mediterranean Diet Score (fMDS). The highest fMDS levels were observed in Sweden, the lowest in Cyprus. High scores were inversely associated with overweight including obesity (OR = 0.85, 95% CI: 0.77; 0.94) and percent fat mass (β = -0.22, 95% CI: -0.43; -0.01) independently of age, sex, socioeconomic status, study center and physical activity. High fMDS at baseline protected against increases in BMI (OR = 0.87, 95% CI: 0.78; 0.98), waist circumference (OR = 0.87, 95% CI: 0.77; 0.98) and waist-to-height ratio (OR = 0.88, 95% CI: 0.78; 0.99) with a similar trend observed for percent fat mass (p = 0.06). Although a Mediterranean dietary pattern is inversely associated with childhood obesity, it is not common in children living in the Mediterranean region and should therefore be advocated as part of EU obesity prevention strategies. Copyright © 2013 Elsevier B.V. All rights reserved.

Relative validity of the Children's Eating Habits Questionnaire-food frequency section among young European children: the IDEFICS Study.

PubMed

Bel-Serrat, Silvia; Mouratidou, Theodora; Pala, Valeria; Huybrechts, Inge; Börnhorst, Claudia; Fernández-Alvira, Juan Miguel; Hadjigeorgiou, Charalampos; Eiben, Gabriele; Hebestreit, Antje; Lissner, Lauren; Molnár, Dénes; Siani, Alfonso; Veidebaum, Toomas; Krogh, Vittorio; Moreno, Luis A

2014-02-01

To compare, specifically by age group, proxy-reported food group estimates obtained from the food frequency section of the Children's Eating Habits questionnaire (CEHQ-FFQ) against the estimates of two non-consecutive 24 h dietary recalls (24-HDR). Estimates of food group intakes assessed via the forty-three-food-group CEHQ-FFQ were compared with those obtained by a computerized 24-HDR. Agreement on frequencies of intakes (equal to the number of portions per recall period) between the two instruments was examined using crude and de-attenuated Pearson's correlation coefficients, cross-classification analyses, weighted kappa statistics (κ w) and Bland-Altman analysis. Kindergartens/schools from eight European countries participating in the IDEFICS (Identification and prevention of Dietary- and lifestyle-induced health EFfects In Children and infantS) Study cross-sectional survey (2007-2008). Children aged 2-9 years (n 2508, 50·4% boys). The CEHQ-FFQ provided higher intake estimates for most of the food groups than the 24-HDR. De-attenuated Pearson correlation coefficients ranged from 0·01 (sweetened fruit) to 0·48 (sweetened milk) in children aged 2-<6 years (mean = 0·25) and from 0·01 (milled cereal) to 0·44 (water) in children aged 6-9 years (mean = 0·23). An average of 32% and 31% of food group intakes were assigned to the same quartile in younger and older children, respectively, and classification into extreme opposite quartiles was ≤12% for all food groups in both age groups. Mean κ w was 0·20 for 2-<6-year-olds and 0·17 for 6-9-year-olds. The strength of association estimates assessed by the CEHQ-FFQ and the 24-HDR varied by food group and by age group. Observed level of agreement and CEHQ-FFQ ability to rank children according to intakes of food groups were considered to be low.

7 CFR 52.801 - Product description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Product description. 52.801 Section 52.801 Agriculture... PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Frozen Red Tart Pitted Cherries Product Description and Grades § 52...

Students' views on the block evaluation process: A descriptive analysis.

PubMed

Pakkies, Ntefeleng E; Mtshali, Ntombifikile G

2016-03-30

Higher education institutions have executed policies and practices intended to determine and promote good teaching. Students' evaluation of the teaching and learning process is seen as one measure of evaluating quality and effectiveness of instruction and courses. Policies and procedures guiding this process are discernible in universities, but it isoften not the case for nursing colleges. To analyse and describe the views of nursing students on block evaluation, and how feedback obtained from this process was managed. A quantitative descriptive study was conducted amongst nursing students (n = 177) in their second to fourth year of training from one nursing college in KwaZulu-Natal. A questionnaire was administered by the researcher and data were analysed using the Statistical Package of Social Sciences Version 19.0. The response rate was 145 (81.9%). The participants perceived the aim of block evaluation as improving the quality of teaching and enhancing their experiences as students.They questioned the significance of their input as stakeholders given that they had never been consulted about the development or review of the evaluation tool, or the administration process; and they often did not receive feedback from the evaluation they participated in. The college management should develop a clear organisational structure with supporting policies and operational guidelines for administering the evaluation process. The administration, implementation procedures, reporting of results and follow-up mechanisms should be made transparent and communicated to all concerned. Reports and actions related to these evaluations should provide feedback into relevant courses or programmes.

14 CFR Sec. 1-3 - General description of system of accounts and reports.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 14 Aeronautics and Space 4 2014-01-01 2014-01-01 false General description of system of accounts and reports. Sec. 1-3 Section 1-3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... reports. (a) This system of accounts and reports is designed to permit limited contraction or expansion to...

14 CFR Sec. 1-3 - General description of system of accounts and reports.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 14 Aeronautics and Space 4 2013-01-01 2013-01-01 false General description of system of accounts and reports. Sec. 1-3 Section 1-3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... reports. (a) This system of accounts and reports is designed to permit limited contraction or expansion to...

14 CFR Sec. 1-3 - General description of system of accounts and reports.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false General description of system of accounts and reports. Sec. 1-3 Section 1-3 Aeronautics and Space OFFICE OF THE SECRETARY, DEPARTMENT OF... reports. (a) This system of accounts and reports is designed to permit limited contraction or expansion to...

Fuel quality/processing study. Volume 3: Fuel upgrading studies

NASA Technical Reports Server (NTRS)

Jones, G. E., Jr.; Bruggink, P.; Sinnett, C.

1981-01-01

The methods used to calculate the refinery selling prices for the turbine fuels of low quality are described. Detailed descriptions and economics of the upgrading schemes are included. These descriptions include flow diagrams showing the interconnection between processes and the stream flows involved. Each scheme is in a complete, integrated, stand alone facility. Except for the purchase of electricity and water, each scheme provides its own fuel and manufactures, when appropriate, its own hydrogen.

Analyses of requirements for computer control and data processing experiment subsystems: Image data processing system (IDAPS) software description (7094 version), volume 2

NASA Technical Reports Server (NTRS)

1973-01-01

A description of each of the software modules of the Image Data Processing System (IDAPS) is presented. The changes in the software modules are the result of additions to the application software of the system and an upgrade of the IBM 7094 Mod(1) computer to a 1301 disk storage configuration. Necessary information about IDAPS sofware is supplied to the computer programmer who desires to make changes in the software system or who desires to use portions of the software outside of the IDAPS system. Each software module is documented with: module name, purpose, usage, common block(s) description, method (algorithm of subroutine) flow diagram (if needed), subroutines called, and storage requirements.

Analysis of methods. [information systems evolution environment

NASA Technical Reports Server (NTRS)

Mayer, Richard J. (Editor); Ackley, Keith A.; Wells, M. Sue; Mayer, Paula S. D.; Blinn, Thomas M.; Decker, Louis P.; Toland, Joel A.; Crump, J. Wesley; Menzel, Christopher P.; Bodenmiller, Charles A.

1991-01-01

Information is one of an organization's most important assets. For this reason the development and maintenance of an integrated information system environment is one of the most important functions within a large organization. The Integrated Information Systems Evolution Environment (IISEE) project has as one of its primary goals a computerized solution to the difficulties involved in the development of integrated information systems. To develop such an environment a thorough understanding of the enterprise's information needs and requirements is of paramount importance. This document is the current release of the research performed by the Integrated Development Support Environment (IDSE) Research Team in support of the IISEE project. Research indicates that an integral part of any information system environment would be multiple modeling methods to support the management of the organization's information. Automated tool support for these methods is necessary to facilitate their use in an integrated environment. An integrated environment makes it necessary to maintain an integrated database which contains the different kinds of models developed under the various methodologies. In addition, to speed the process of development of models, a procedure or technique is needed to allow automatic translation from one methodology's representation to another while maintaining the integrity of both. The purpose for the analysis of the modeling methods included in this document is to examine these methods with the goal being to include them in an integrated development support environment. To accomplish this and to develop a method for allowing intra-methodology and inter-methodology model element reuse, a thorough understanding of multiple modeling methodologies is necessary. Currently the IDSE Research Team is investigating the family of Integrated Computer Aided Manufacturing (ICAM) DEFinition (IDEF) languages IDEF(0), IDEF(1), and IDEF(1x), as well as ENALIM, Entity

CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

DOE Office of Scientific and Technical Information (OSTI.GOV)

J.F. Beesley

The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative designmore » process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.« less

Descriptive Study Analyzing Discrepancies in a Software Development Project Change Request (CR) Assessment Process and Recommendations for Process Improvements

NASA Technical Reports Server (NTRS)

Cunningham, Kenneth J.

2002-01-01

The Change Request (CR) assessment process is essential in the display development cycle. The assessment process is performed to ensure that the changes stated in the description of the CR match the changes in the actual display requirements. If a discrepancy is found between the CR and the requirements, the CR must be returned to the originator for corrections. Data will be gathered from each of the developers to determine the type of discrepancies and the amount of time spent assessing each CR. This study will determine the most common types of discrepancies and the amount of time spent assessing those issues. The results of the study will provide a foundation for future improvements as well as a baseline for future studies.

[DESCRIPTION AND PRESENTATION OF THE RESULTS OF ELECTROENCEPHALOGRAM PROCESSING USING AN INFORMATION MODEL].

PubMed

Myznikov, I L; Nabokov, N L; Rogovanov, D Yu; Khankevich, Yu R

2016-01-01

The paper proposes to apply the informational modeling of correlation matrix developed by I.L. Myznikov in early 1990s in neurophysiological investigations, such as electroencephalogram recording and analysis, coherence description of signals from electrodes on the head surface. The authors demonstrate information models built using the data from studies of inert gas inhalation by healthy human subjects. In the opinion of the authors, information models provide an opportunity to describe physiological processes with a high level of generalization. The procedure of presenting the EEG results holds great promise for the broad application.

Relationship between markers of body fat and calcaneal bone stiffness differs between preschool and primary school children: results from the IDEFICS baseline survey.

PubMed

Sioen, Isabelle; Mouratidou, Theodora; Herrmann, Diana; De Henauw, Stefaan; Kaufman, Jean-Marc; Molnár, Dénes; Moreno, Luis A; Marild, Staffan; Barba, Gianvincenzo; Siani, Alfonso; Gianfagna, Francesco; Tornaritis, Michael; Veidebaum, Toomas; Ahrens, Wolfgang

2012-10-01

The aim of this study was to investigate the relationship between markers of body fat and bone status assessed as calcaneal bone stiffness in a large sample of European healthy pre- and primary school children. Participants were 7,447 children from the IDEFICS study (spread over eight different European countries), age 6.1 ± 1.8 years (range 2.1-9.9), 50.5 % boys. Anthropometric measurements (weight, height, bioelectrical impedance, waist and hip circumference, and tricipital and subscapular skinfold thickness) as well as quantitative ultrasonographic measurements to determine calcaneal stiffness index (SI) were performed. Partial correlation analysis, linear regression analysis, and ANCOVA were stratified by sex and age group: preschool boys (n = 1,699) and girls (n = 1,599) and primary school boys (n = 2,062) and girls (n = 2,087). In the overall study population, the average calcaneal SI was equal to 80.2 ± 14.0, ranging 42.4-153. The results showed that preschool children with higher body fat had lower calcaneal SI (significant correlation coefficients between -0.05 and -0.20), while primary school children with higher body fat had higher calcaneal SI (significant correlation coefficients between 0.05 and 0.13). After adjusting for fat-free mass, both preschool and primary school children showed an inverse relationship between body fat and calcaneal stiffness. To conclude, body fat is negatively associated with calcaneal bone stiffness in children after adjustment for fat-free mass. Fat-free mass may confound the association in primary school children but not in preschool children. Muscle mass may therefore be an important determinant of bone stiffness.

Detailed and reduced chemical-kinetic descriptions for hydrocarbon combustion

NASA Astrophysics Data System (ADS)

Petrova, Maria V.

Numerical and theoretical studies of autoignition processes of fuels such as propane are in need of realistic simplified chemical-kinetic descriptions that retain the essential features of the detailed descriptions. These descriptions should be computationally feasible and cost-effective. Such descriptions are useful for investigating ignition processes that occur, for example, in homogeneous-charge compression-ignition engines, for studying the structures and dynamics of detonations and in fields such as multi-dimensional Computational Fluid Dynamics (CFD). Reduced chemistry has previously been developed successfully for a number of other hydrocarbon fuels, however, propane has not been considered in this manner. This work focuses on the fuels of propane, as well propene, allene and propyne, for several reasons. The ignition properties of propane resemble those of other higher hydrocarbons but are different from those of the lower hydrocarbons (e.g. ethylene and acetylene). Propane, therefore, may be the smallest hydrocarbon that is representative of higher hydrocarbons in ignition and detonation processes. Since the overall activation energy and ignition times for propane are similar to those of other higher hydrocarbons, including liquid fuels that are suitable for many applications, propane has been used as a model fuel for several numerical and experimental studies. The reason for studying elementary chemistry of propene and C3H4 (allene or propyne) is that during the combustion process, propane breaks down to propene and C3H4 before proceeding to products. Similarly, propene combustion includes C3H4 chemistry. In studying propane combustion, it is therefore necessary to understand the underlying combustion chemistry of propene as well as C3H 4. The first part of this thesis focuses on obtaining and testing a detailed chemical-kinetic description for autoignition of propane, propene and C 3H4, by comparing predictions obtained with this detailed mechanism

Radar image processing module development program, phase 3

NASA Technical Reports Server (NTRS)

1977-01-01

The feasibility of using charge coupled devices in an IPM for processing synthetic aperture radar signals onboard the NASA Convair 990 (CV990) aircraft was demonstrated. Radar data onboard the aircraft was recorded and processed using a CCD sampler and digital tape recorder. A description of equipment and testing was provided. The derivation of the digital presum filter was documented. Photographs of the sampler/tape recorder, real time display and circuit boards in the IPM were also included.

Airborne Intelligent Display (AID) Phase I Software Description,

DTIC Science & Technology

1983-10-24

Board Computer Characteristics 10 3.0 SOFTWARE GENERAL DESCRIPTION 13 3.1 Overview 13 3.2 System Software 14 3.2.1 System Startup 14 3.2.1.1 Initial...3 A-2 Task States A-4 A-3 Task Program Structure A-6 A-4 Task States and State Change Mechanisms A-7 A-5 Computing Return Addresses: RUNADR, SLPADR A...techniques. 2.2 Design Approach The stated objectives were met by: 1. distributing the processing load among multiple Z80 single-board computers (SBC’s). This

Taiwanese women's process of recovery from stillbirth: a qualitative descriptive study.

PubMed

Tseng, Ying-Fen; Chen, Chung-Hey; Wang, Hsiu-Hung

2014-06-01

The purpose of this qualitative descriptive study was to portray the recovery process of Taiwanese women after stillbirth. Data were generated through individual in-depth interviews with 21 women selected using purposeful sampling. Three stages in an emotional journey of recovery were suffering from silent grief, searching for a way out, and achieving peace of mind and mental stability. Throughout their journey, the women's overarching concern was where the deceased child had gone and whether it was well. Together these stages composed A pathway to peace of mind, a mental journey on which women struggled to spiritually connect with the lost baby and finally sought a personal pathway to emotional peace. Findings can inform healthcare providers in providing culturally sensitive care for Taiwanese women to facilitate healing after a stillbirth. © 2014 Wiley Periodicals, Inc.

Qualitative dynamics semantics for SBGN process description.

PubMed

Rougny, Adrien; Froidevaux, Christine; Calzone, Laurence; Paulevé, Loïc

2016-06-16

Qualitative dynamics semantics provide a coarse-grain modeling of networks dynamics by abstracting away kinetic parameters. They allow to capture general features of systems dynamics, such as attractors or reachability properties, for which scalable analyses exist. The Systems Biology Graphical Notation Process Description language (SBGN-PD) has become a standard to represent reaction networks. However, no qualitative dynamics semantics taking into account all the main features available in SBGN-PD had been proposed so far. We propose two qualitative dynamics semantics for SBGN-PD reaction networks, namely the general semantics and the stories semantics, that we formalize using asynchronous automata networks. While the general semantics extends standard Boolean semantics of reaction networks by taking into account all the main features of SBGN-PD, the stories semantics allows to model several molecules of a network by a unique variable. The obtained qualitative models can be checked against dynamical properties and therefore validated with respect to biological knowledge. We apply our framework to reason on the qualitative dynamics of a large network (more than 200 nodes) modeling the regulation of the cell cycle by RB/E2F. The proposed semantics provide a direct formalization of SBGN-PD networks in dynamical qualitative models that can be further analyzed using standard tools for discrete models. The dynamics in stories semantics have a lower dimension than the general one and prune multiple behaviors (which can be considered as spurious) by enforcing the mutual exclusiveness between the activity of different nodes of a same story. Overall, the qualitative semantics for SBGN-PD allow to capture efficiently important dynamical features of reaction network models and can be exploited to further refine them.

SIGMA Final Report. Volume V, Part 1-3. Introduction, Functional Description and Evaluation.

DTIC Science & Technology

1982-05-01

AD-AlSb 359 UNIVERSITY OF SOUTHERN CALIFORNIA MARINA DEL REY INFO-ETC F/6 17/2 SIGMA FINAL REPORT . VOLUME V. PART 1-3. INTRODUCTION. FUNCTIONA-ETC(U...EIIIIIIIIIIIIE IIIEIIIIEIIIII 111111111111flfflfflEllllllEEllEE H ~28 ",2,5 11111 ..25 .411111 ii1.6 MICROCOPY RESOLUTION TEST CHAFT N W MME Final Report ...Volume V, Parts 1, 2, and 3 ISI/FiR-82-94 SIGMA Final Report : Introduction, Functional Description, and Evaluation Robert Stotz David Wilczynski

Impact of a community based health-promotion programme in 2- to 9-year-old children in Europe on markers of the metabolic syndrome, the IDEFICS study.

PubMed

Mårild, S; Russo, P; Veidebaum, T; Tornaritis, M; De Henauw, S; De Bourdeaudhuij, I; Molnár, D; Moreno, L A; Bramsved, R; Peplies, J; Ahrens, W

2015-12-01

One objective of 'Identification and prevention of Dietary-and lifestyle-induced health EFfects In Children and infantS', the IDEFICS study, was to implement a community-oriented childhood obesity prevention intervention in eight European countries. To assess the effect of an obesity primary prevention programme on metabolic markers. The study had a non-randomized cluster-experimental design. In each country, children were recruited from distinct communities serving as intervention and control regions. Health examinations were done during 2007-2008 before the intervention (T0 ) and during 2009-2010 (T1 ). Children with results available from T0 and T1 on blood pressure, waist circumference and at least one blood-marker (fasting glucose, insulin, HOMA-IR, HbA1c, HDL- and LDL-cholesterol, triglycerides, C-reactive protein) were included. A metabolic syndrome (MetS) score was calculated. A total of 7,406 children (age 2-9.9 years) of the 16,228 participating at T0 provided the necessary data. No effect of the intervention was seen on insulin, HOMA-IR, CRP or the MetS score. Overall fasting glucose increased less in the intervention than in the control region, a pattern driven by three of the eight countries and more pronounced in children of parents with low education. Overall, HbA1c and waist circumference increased more and blood pressure less in the intervention regions. We observed no convincing effect of the intervention on markers of the metabolic syndrome. We identified diverse patterns of change for several markers of uncertain relation to the intervention. © 2015 World Obesity.

An Ada Based Expert System for the Ada Version of SAtool II. Volume 1 and 2

DTIC Science & Technology

1991-06-06

Integrated Computer-Aided Manufacturing (ICAM) (20). In fact, IDEF 0 stands for ICAM Definition Method Zero . IDEF0 defines a subset of SA that omits...reasoning that has been programmed). An expert’s knowledge is specific to one problem domain as opposed to knowledge about general problem-solving...techniques. General problem domains are medicine, finance, science or engineering and so forth in which an expert can solve specific problems very well

Developmental Changes in Children’s Processing of Redundant Modifiers in Definite Object Descriptions

PubMed Central

Koolen, Ruud; Krahmer, Emiel; Swerts, Marc

2016-01-01

This paper investigates developmental changes in children’s processing of redundant information in definite object descriptions. In two experiments, children of two age groups (6 or 7, and 9 or 10 years old) were presented with pictures of sweets. In the first experiment (pairwise comparison), two identical sweets were shown, and one of these was described with a redundant modifier. After the description, the children had to indicate the sweet they preferred most in a forced-choice task. In the second experiment (graded rating), only one sweet was shown, which was described with a redundant color modifier in half of the cases (e.g., “the blue sweet”) and in the other half of the cases simply as “the sweet.” This time, the children were asked to indicate on a 5-point rating scale to what extent they liked the sweets. In both experiments, the results showed that the younger children had a preference for the sweets described with redundant information, while redundant information did not have an effect on the preferences for the older children. These results imply that children are learning to distinguish between situations in which redundant information carries an implicature and situations in which this is not the case. PMID:27994569

A Structured Process Description of a Pragmatic Implementation Project: Improving Integrated Care for Older Persons in Residential Care Homes

PubMed Central

Poot, Antonius J.; de Waard, Claudia S.; Wind, Annet W.; Caljouw, Monique A. A.; Gussekloo, Jacobijn

2017-01-01

Evaluation of the implementation of integrated care can differ from trial-based research due to complexity. Therefore, we examined whether a theory-based method for process description of implementation can contribute to improvement of evidence-based care. MOVIT, a Dutch project aimed at implementing integrated care for older vulnerable persons in residential care homes, was used as a case study. The project activities were defined according to implementation taxonomy and mapped in a matrix of theoretical levels and domains. Project activities mainly targeted professionals (both individual and group). A few activities targeted the organizational level, whereas none targeted the policy level, or the patient, or the “social, political, and legal” domains. However, the resulting changes in care delivery arrangement had consequences for professionals, patients, organizations, and the social, political, and legal domains. A structured process description of a pragmatic implementation project can help assess the fidelity and quality of the implementation, and identify relevant contextual factors for immediate adaptation and future research. The description showed that, in the MOVIT project, there was a discrepancy between the levels and domains targeted by the implementation activities and those influenced by the resulting changes in delivery arrangement. This could have influenced, in particular, the adoption and sustainability of the project. PMID:29161944

A Structured Process Description of a Pragmatic Implementation Project: Improving Integrated Care for Older Persons in Residential Care Homes.

PubMed

Poot, Antonius J; de Waard, Claudia S; Wind, Annet W; Caljouw, Monique A A; Gussekloo, Jacobijn

2017-01-01

Evaluation of the implementation of integrated care can differ from trial-based research due to complexity. Therefore, we examined whether a theory-based method for process description of implementation can contribute to improvement of evidence-based care. MOVIT, a Dutch project aimed at implementing integrated care for older vulnerable persons in residential care homes, was used as a case study. The project activities were defined according to implementation taxonomy and mapped in a matrix of theoretical levels and domains. Project activities mainly targeted professionals (both individual and group). A few activities targeted the organizational level, whereas none targeted the policy level, or the patient, or the "social, political, and legal" domains. However, the resulting changes in care delivery arrangement had consequences for professionals, patients, organizations, and the social, political, and legal domains. A structured process description of a pragmatic implementation project can help assess the fidelity and quality of the implementation, and identify relevant contextual factors for immediate adaptation and future research. The description showed that, in the MOVIT project, there was a discrepancy between the levels and domains targeted by the implementation activities and those influenced by the resulting changes in delivery arrangement. This could have influenced, in particular, the adoption and sustainability of the project.

Preparing Children to Look at Pictures: Advance Descriptions Direct Attention and Facilitate Active Processing

ERIC Educational Resources Information Center

Carr, Thomas H.; And Others

1977-01-01

The effect of three different kinds of advance descriptions on recognition memory for component information from pictures was measured for 72 first-grade children. All descriptions resulted in higher retention of all components than viewing without description. (Author/JMB)

Deep Sequence Analysis of AgoshRNA Processing Reveals 3' A Addition and Trimming.

PubMed

Harwig, Alex; Herrera-Carrillo, Elena; Jongejan, Aldo; van Kampen, Antonius Hubertus; Berkhout, Ben

2015-07-14

The RNA interference (RNAi) pathway, in which microprocessor and Dicer collaborate to process microRNAs (miRNA), was recently expanded by the description of alternative processing routes. In one of these noncanonical pathways, Dicer action is replaced by the Argonaute2 (Ago2) slicer function. It was recently shown that the stem-length of precursor-miRNA or short hairpin RNA (shRNA) molecules is a major determinant for Dicer versus Ago2 processing. Here we present the results of a deep sequence study on the processing of shRNAs with different stem length and a top G·U wobble base pair (bp). This analysis revealed some unexpected properties of these so-called AgoshRNA molecules that are processed by Ago2 instead of Dicer. First, we confirmed the gradual shift from Dicer to Ago2 processing upon shortening of the hairpin length. Second, hairpins with a stem larger than 19 base pair are inefficiently cleaved by Ago2 and we noticed a shift in the cleavage site. Third, the introduction of a top G·U bp in a regular shRNA can promote Ago2-cleavage, which coincides with a loss of Ago2-loading of the Dicer-cleaved 3' strand. Fourth, the Ago2-processed AgoshRNAs acquire a short 3' tail of 1-3 A-nucleotides (nt) and we present evidence that this product is subsequently trimmed by the poly(A)-specific ribonuclease (PARN).

Deep Sequence Analysis of AgoshRNA Processing Reveals 3' A Addition and Trimming

PubMed Central

Harwig, Alex; Herrera-Carrillo, Elena; Jongejan, Aldo; van Kampen, Antonius Hubertus; Berkhout, Ben

2015-01-01

The RNA interference (RNAi) pathway, in which microprocessor and Dicer collaborate to process microRNAs (miRNA), was recently expanded by the description of alternative processing routes. In one of these noncanonical pathways, Dicer action is replaced by the Argonaute2 (Ago2) slicer function. It was recently shown that the stem-length of precursor-miRNA or short hairpin RNA (shRNA) molecules is a major determinant for Dicer versus Ago2 processing. Here we present the results of a deep sequence study on the processing of shRNAs with different stem length and a top G·U wobble base pair (bp). This analysis revealed some unexpected properties of these so-called AgoshRNA molecules that are processed by Ago2 instead of Dicer. First, we confirmed the gradual shift from Dicer to Ago2 processing upon shortening of the hairpin length. Second, hairpins with a stem larger than 19 base pair are inefficiently cleaved by Ago2 and we noticed a shift in the cleavage site. Third, the introduction of a top G·U bp in a regular shRNA can promote Ago2-cleavage, which coincides with a loss of Ago2-loading of the Dicer-cleaved 3' strand. Fourth, the Ago2-processed AgoshRNAs acquire a short 3' tail of 1–3 A-nucleotides (nt) and we present evidence that this product is subsequently trimmed by the poly(A)-specific ribonuclease (PARN). PMID:26172504

Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0

DTIC Science & Technology

2008-11-05

Naval Research Laboratory Stennis Space Center, MS 39529-5004 NRL/MR/7320--08-9150 Approved for public release; distribution is unlimited. Software ...collection of information, including suggestions for reducing this burden to Department of Defense, Washington Headquarters Services , Directorate for...THIS PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT Software Design Description for the Polar Ice Prediction System (PIPS) Version 3.0 Pamela G

Use of a modified informed consent process among vulnerable patients: a descriptive study.

PubMed

Sudore, Rebecca L; Landefeld, C Seth; Williams, Brie A; Barnes, Deborah E; Lindquist, Karla; Schillinger, Dean

2006-08-01

Little is known about patient characteristics associated with comprehension of consent information, and whether modifications to the consent process can promote understanding. To describe a modified research consent process, and determine whether literacy and demographic characteristics are associated with understanding consent information. Descriptive study of a modified consent process: consent form (written at a sixth-grade level) read to participants, combined with 7 comprehension questions and targeted education, repeated until comprehension achieved (teach-to-goal). Two hundred and four ethnically diverse subjects, aged > or = 50, consenting for a trial to improve the forms used for advance directives. Number of passes through the consent process required to achieve complete comprehension. Literacy assessed in English and Spanish with the Short Form Test of Functional Health Literacy in Adults (scores 0 to 36). Participants had a mean age of 61 years and 40% had limited literacy (s-TOHFLA<23). Only 28% of subjects answered all comprehension questions correctly on the first pass. After adjustment, lower literacy (P=.04) and being black (P=.03) were associated with requiring more passes through the consent process. Not speaking English as a primary language was associated with requiring more passes through the consent process in bivariate analyses (P<.01), but not in multivariable analyses (P>.05). After the second pass, most subjects (80%) answered all questions correctly. With a teach-to-goal strategy, 98% of participants who engaged in the consent process achieved complete comprehension. Lower literacy and minority status are important determinants of understanding consent information. Using a modified consent process, little additional education was required to achieve complete comprehension, regardless of literacy or language barriers.

Physics 3204. Course Description.

ERIC Educational Resources Information Center

Newfoundland and Labrador Dept. of Education.

A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

SRB-3D Solid Rocket Booster performance prediction program. Volume 1: Engineering description/users information manual

NASA Technical Reports Server (NTRS)

Winkler, J. C.

1976-01-01

The modified Solid Rocket Booster Performance Evaluation Model (SRB-3D) was developed as an extension to the internal ballistics module of the SRB-2 performance program. This manual contains the engineering description of SRB-3D which describes the approach used to develop the 3D concept and an explanation of the modifications which were necessary to implement these concepts.

40 CFR 417.100 - Applicability; description of the air-SO3 sulfation and sulfonation subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the air-SO3 sulfation and sulfonation subcategory. 417.100 Section 417.100 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.100 - Applicability; description of the air-SO3 sulfation and sulfonation subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the air-SO3 sulfation and sulfonation subcategory. 417.100 Section 417.100 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.110 - Applicability; description of the SO3 solvent and vacuum sulfonation subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the SO3 solvent and vacuum sulfonation subcategory. 417.110 Section 417.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.110 - Applicability; description of the SO3 solvent and vacuum sulfonation subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 30 2012-07-01 2012-07-01 false Applicability; description of the SO3 solvent and vacuum sulfonation subcategory. 417.110 Section 417.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.110 - Applicability; description of the SO3 solvent and vacuum sulfonation subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the SO3 solvent and vacuum sulfonation subcategory. 417.110 Section 417.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.100 - Applicability; description of the air-SO3 sulfation and sulfonation subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the air-SO3 sulfation and sulfonation subcategory. 417.100 Section 417.100 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.100 - Applicability; description of the air-SO3 sulfation and sulfonation subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the air-SO3 sulfation and sulfonation subcategory. 417.100 Section 417.100 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.110 - Applicability; description of the SO3 solvent and vacuum sulfonation subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the SO3 solvent and vacuum sulfonation subcategory. 417.110 Section 417.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.100 - Applicability; description of the air-SO3 sulfation and sulfonation subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 30 2012-07-01 2012-07-01 false Applicability; description of the air-SO3 sulfation and sulfonation subcategory. 417.100 Section 417.100 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

40 CFR 417.110 - Applicability; description of the SO3 solvent and vacuum sulfonation subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the SO3 solvent and vacuum sulfonation subcategory. 417.110 Section 417.110 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS SOAP AND DETERGENT MANUFACTURING...

Analytic description of the frictionally engaged in-plane bending process incremental swivel bending (ISB)

NASA Astrophysics Data System (ADS)

Frohn, Peter; Engel, Bernd; Groth, Sebastian

2018-05-01

Kinematic forming processes shape geometries by the process parameters to achieve a more universal process utilizations regarding geometric configurations. The kinematic forming process Incremental Swivel Bending (ISB) bends sheet metal strips or profiles in plane. The sequence for bending an arc increment is composed of the steps clamping, bending, force release and feed. The bending moment is frictionally engaged by two clamping units in a laterally adjustable bending pivot. A minimum clamping force hindering the material from slipping through the clamping units is a crucial criterion to achieve a well-defined incremental arc. Therefore, an analytic description of a singular bent increment is developed in this paper. The bending moment is calculated by the uniaxial stress distribution over the profiles' width depending on the bending pivot's position. By a Coulomb' based friction model, necessary clamping force is described in dependence of friction, offset, dimensions of the clamping tools and strip thickness as well as material parameters. Boundaries for the uniaxial stress calculation are given in dependence of friction, tools' dimensions and strip thickness. The results indicate that changing the bending pivot to an eccentric position significantly affects the process' bending moment and, hence, clamping force, which is given in dependence of yield stress and hardening exponent. FE simulations validate the model with satisfactory accordance.

Thick Descriptions: A Language for Articulating Ethnographic Media Technology.

ERIC Educational Resources Information Center

Goldman-Segall, Ricki

"Thick descriptions" are descriptions that are layered enough to draw conclusions and uncover the intentions of a given act, event, or process. In a video environment, thick descriptions are images, gestures, or sequences that convey meaning. Neither the quantity nor the resolution of the images makes the descriptions thick. Thickness is…

43 CFR 3110.5-1 - Parcel number description.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Parcel number description. 3110.5-1... § 3110.5-1 Parcel number description. From the first day following the end of a competitive process until... lands covered by that competitive process shall be the parcel number on the List of Lands Available for...

Geomega: MEGAlib's Uniform Geometry and Detector Description Tool for Geant3, MGGPOD, and Geant4

NASA Astrophysics Data System (ADS)

Zoglauer, Andreas C.; Andritschke, R.; Schopper, F.; Wunderer, C. B.

2006-09-01

The Medium Energy Gamma-ray Astronomy library MEGAlib is a set of software tools for the analysis of low to medium energy gamma-ray telescopes, especially Compton telescopes. It comprises all necessary data analysis steps from simulation/measurements via event reconstruction to image reconstruction and enables detailed performance assessments. In the energy range of Compton telescopes (with energy deposits from a few keV up to hundreds of MeV), the Geant Monte-Carlo software packages (Geant3 with its MGGPOD extension as well as Geant4) are widely used. Since each tool has its unique advantages, MEGAlib contains a geometry and detector description library, called Geomega, which allows to use those tools in a uniform way. It incorporates the versatile 3D display facilities available within the ROOT libraries. The same geometry, material, trigger, and detector description can be used for all simulation tools as well as for the later event analysis in the MEGAlib framework. This is done by converting the MEGAlib geometry into the Geant3 or MGGPOD format or directly linking the Geomega library into Geant4. The geometry description can handle most (and can be extended to handle all) volumes common to Geant3, Geant4 and ROOT. In Geomega a list of features is implemented which are especially useful for optimizing detector geometries: It allows to define constants, can handle mathematical operations, enables volume scaling, checks for overlaps of detector volumes, does mass calculations, etc. Used in combination with MEGAlib, Geomega enables discretization, application of detector noise, thresholds, various trigger conditions, defective pixels, etc. The highly modular and completely object-oriented library is written in C++ and based on ROOT. It has been originally developed for the tracking Compton scattering and Pair creation telescope MEGA and has been successfully applied to a wide variety of telescopes, such as ACT, NuSTAR, or GRI.

7 CFR 52.1841 - Product description.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Product description. 52.1841 Section 52.1841... MARKETING ACT OF 1946 PROCESSED FRUITS AND VEGETABLES, PROCESSED PRODUCTS THEREOF, AND CERTAIN OTHER PROCESSED FOOD PRODUCTS 1 United States Standards for Grades of Processed Raisins 1 § 52.1841 Product...

Reduced-Density-Matrix Description of Decoherence and Relaxation Processes for Electron-Spin Systems

NASA Astrophysics Data System (ADS)

Jacobs, Verne

2017-04-01

Electron-spin systems are investigated using a reduced-density-matrix description. Applications of interest include trapped atomic systems in optical lattices, semiconductor quantum dots, and vacancy defect centers in solids. Complimentary time-domain (equation-of-motion) and frequency-domain (resolvent-operator) formulations are self-consistently developed. The general non-perturbative and non-Markovian formulations provide a fundamental framework for systematic evaluations of corrections to the standard Born (lowest-order-perturbation) and Markov (short-memory-time) approximations. Particular attention is given to decoherence and relaxation processes, as well as spectral-line broadening phenomena, that are induced by interactions with photons, phonons, nuclear spins, and external electric and magnetic fields. These processes are treated either as coherent interactions or as environmental interactions. The environmental interactions are incorporated by means of the general expressions derived for the time-domain and frequency-domain Liouville-space self-energy operators, for which the tetradic-matrix elements are explicitly evaluated in the diagonal-resolvent, lowest-order, and Markov (short-memory time) approximations. Work supported by the Office of Naval Research through the Basic Research Program at The Naval Research Laboratory.

(e,2e) and (Î3,2e) Processes: Open and Closed Questions

NASA Astrophysics Data System (ADS)

An important breakthrough has been achieved recently in the description of (e,2e) and (Î3,2e) processes with the development of new ab-initio theories: the external complex scaling theory (ECS), the time dependent close coupling theory (TDCC), and the hyperspherical R-matrix theory with semiclassical outgoing waves (HRM-SOW). The principles of these various theories are summarized, their relations are considered, and their achievements are discussed with respect to the available experimental data regarding electron impact ionization of H and photo double ionization of He. Possible directions for future work are outlined.

Stabilization process of human population: a descriptive approach.

PubMed

Kayani, A K; Krotki, K J

1981-01-01

An attempt is made to inquire into the process of stabilization of a human population. The same age distribution distorted by past variations in fertility is subjected to several fixed schedules of fertility. The schedules are different from each other monotonically over a narrow range. The primary concern is with the process, almost year by year, through which the populations become stable. There is particular interest in the differential impact in the same original age distribution of the narrowly different fixed fertility schedules. The exercise is prepared in 3 stages: general background of the process of stabilization; methodology and data used; and analysis and discussion of the stabilization process. Among the several approaches through which the analysis of stable population is possible, 2 are popular: the integral equation and the projection matrix. In this presentation the interest is in evaluating the effects of fertility on the stabilization process of a population. Therefore, only 1 initial age distribution and only 1 life table but a variety of narrowly different schedules of fertility have been used. Specifically, the U.S. 1963 female population is treated as the initial population. The process of stabilization is viewed in the light of the changes in the slopes between 2 successive age groups of an age distribution. A high fertility schedule with the given initial age distribution and mortality level overcomes the oscillations more quickly than the low fertility schedule. Simulation confirms the intuitively expected positive relationship between the mean of the slope and the level of fertility. The variance of the slope distribution is an indicator of the aging of the distribution.

Defense AT&L (Volume 35, Number 6, November-December 2006)

DTIC Science & Technology

2006-12-01

our view of reality is inherently unstable. That is, when we realize our current cultural preferences, frame- works, mental models , doctrines...manufacturing rules and procedures (con- trols). IDEF0 function modeling has since been adopted for other applications such as business process... negotiating busy intersections, and avoiding obstacles. The DARPA Grand Challenge Web site <http://www.darpa.mil/grandchallenge>is the primary resource for

Cold fission description with constant and varying mass asymmetries

NASA Astrophysics Data System (ADS)

Duarte, S. B.; Rodríguez, O.; Tavares, O. A. P.; Gonçalves, M.; García, F.; Guzmán, F.

1998-05-01

Different descriptions for varying the mass asymmetry in the fragmentation process are used to calculate the cold fission barrier penetrability. The relevance of the appropriate choice for both the description of the prescission phase and inertia coefficient to unify alpha decay, cluster radioactivity, and spontaneous cold fission processes in the same theoretical framework is explicitly shown. We calculate the half-life of all possible partition modes of nuclei of A>200 following the most recent Mass Table by Audi and Wapstra. It is shown that if one uses the description in which the mass asymmetry is maintained constant during the fragmentation process, the experimental half-life values and mass yield of 234U cold fission are satisfactorily reproduced.

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2012 CFR

2012-10-01

... programming distributor. (8) Children's Programming. Television programming directed at children 16 years of... provide 50 hours of video description per calendar quarter, either during prime time or on children's... calendar quarter, either during prime time or on children's programming, on each programming stream on...

47 CFR 79.3 - Video description of video programming.

Code of Federal Regulations, 2013 CFR

2013-10-01

... programming distributor. (8) Children's Programming. Television programming directed at children 16 years of... provide 50 hours of video description per calendar quarter, either during prime time or on children's... calendar quarter, either during prime time or on children's programming, on each programming stream on...

Context retrieval and description benefits for recognition of unfamiliar faces.

PubMed

Jones, Todd C; Robinson, Kealagh; Steel, Brenna C

2018-04-19

Describing unfamiliar faces during or immediately after their presentation in a study phase can produce better recognition memory performance compared with a view-only control condition. We treated descriptions as elaborative information that is part of the study context and investigated how context retrieval influences recognition memory. Following general dual-process theories, we hypothesized that recollection would be used to recall descriptions and that description recall would influence recognition decisions, including the level of recognition confidence. In four experiments description conditions produced higher hit rates and higher levels of recognition confidence than control conditions. Participants recalled descriptive content on some trials, and this context retrieval was linked to an increase in the recognition confidence level. Repeating study faces in description conditions increased recognition scores, recognition confidence level, and context retrieval. Estimates of recollection from Yonelinas' (1994) dual-process signal detection ROCs were, on average, very close to the measures of context recall. Description conditions also produced higher estimates of familiarity. Finally, we found evidence that participants engaged in description activity in some ostensibly view-only trials. An emphasis on the information participants use in making their recognition decisions can advance understanding on description effects when descriptions are part of the study trial context. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Validation of a multi-phase plant-wide model for the description of the aeration process in a WWTP.

PubMed

Lizarralde, I; Fernández-Arévalo, T; Beltrán, S; Ayesa, E; Grau, P

2018-02-01

This paper introduces a new mathematical model built under the PC-PWM methodology to describe the aeration process in a full-scale WWTP. This methodology enables a systematic and rigorous incorporation of chemical and physico-chemical transformations into biochemical process models, particularly for the description of liquid-gas transfer to describe the aeration process. The mathematical model constructed is able to reproduce biological COD and nitrogen removal, liquid-gas transfer and chemical reactions. The capability of the model to describe the liquid-gas mass transfer has been tested by comparing simulated and experimental results in a full-scale WWTP. Finally, an exploration by simulation has been undertaken to show the potential of the mathematical model. Copyright © 2017 Elsevier Ltd. All rights reserved.

Electrical brain responses to descriptive versus evaluative judgments of music.

PubMed

Brattico, Elvira; Jacobsen, Thomas; De Baene, Wouter; Nakai, Noa; Tervaniemi, Mari

2003-11-01

The present study was aimed at finding neural correlates of aesthetic versus descriptive listening of the same musical cadences. Results showed that aesthetic listening generated greater right frontocentral negativities than did descriptive listening, indicating distinct cortical mechanisms for aesthetic versus descriptive processing of music.

Promoting Shared Decision Making through Descriptive Inquiry

ERIC Educational Resources Information Center

Seher, Rachel; Traugh, Cecelia; Cheng, Alan

2018-01-01

This article shows how City-As-School, a progressive public school in New York City, used descriptive inquiry to deepen shared decision making, which is a central value of the school and part of a democratic way of life. Descriptive inquiry is a democratic knowledge-making process that was developed at the Prospect School in North Bennington,…

Orbiter active thermal control system description

NASA Technical Reports Server (NTRS)

Laubach, G. E.

1975-01-01

A brief description of the Orbiter Active Thermal Control System (ATCS) including (1) major functional requirements of heat load, temperature control and heat sink utilization, (2) the overall system arrangement, and (3) detailed description of the elements of the ATCS.

B(IS4; 0{GS/+}→4{/γ +}) systematics in rare-earth nuclei: SUsdg (3) description

NASA Astrophysics Data System (ADS)

Devi, Y. D.; Kota, V. K. B.

1993-12-01

The observed variation of B(IS4; 0{GS/+}→{/γ +}) with mass number A, that gives information about hexadecupole component in γ-vibration, in rare-earth nuclei is studied in the SUsdg (3) limit of sdg interacting boson model employing IBM-2 to IBM-1 projected hexadecupole transition operator with effective charges determined using a multi- j shell mapping procedure. The SUsdg (3) limit provides a reasonably good description of the data.

Towards a metadata scheme for the description of materials - the description of microstructures

NASA Astrophysics Data System (ADS)

Schmitz, Georg J.; Böttger, Bernd; Apel, Markus; Eiken, Janin; Laschet, Gottfried; Altenfeld, Ralph; Berger, Ralf; Boussinot, Guillaume; Viardin, Alexandre

2016-01-01

The property of any material is essentially determined by its microstructure. Numerical models are increasingly the focus of modern engineering as helpful tools for tailoring and optimization of custom-designed microstructures by suitable processing and alloy design. A huge variety of software tools is available to predict various microstructural aspects for different materials. In the general frame of an integrated computational materials engineering (ICME) approach, these microstructure models provide the link between models operating at the atomistic or electronic scales, and models operating on the macroscopic scale of the component and its processing. In view of an improved interoperability of all these different tools it is highly desirable to establish a standardized nomenclature and methodology for the exchange of microstructure data. The scope of this article is to provide a comprehensive system of metadata descriptors for the description of a 3D microstructure. The presented descriptors are limited to a mere geometric description of a static microstructure and have to be complemented by further descriptors, e.g. for properties, numerical representations, kinetic data, and others in the future. Further attributes to each descriptor, e.g. on data origin, data uncertainty, and data validity range are being defined in ongoing work. The proposed descriptors are intended to be independent of any specific numerical representation. The descriptors defined in this article may serve as a first basis for standardization and will simplify the data exchange between different numerical models, as well as promote the integration of experimental data into numerical models of microstructures. An HDF5 template data file for a simple, three phase Al-Cu microstructure being based on the defined descriptors complements this article.

Towards a metadata scheme for the description of materials - the description of microstructures.

PubMed

Schmitz, Georg J; Böttger, Bernd; Apel, Markus; Eiken, Janin; Laschet, Gottfried; Altenfeld, Ralph; Berger, Ralf; Boussinot, Guillaume; Viardin, Alexandre

2016-01-01

The property of any material is essentially determined by its microstructure. Numerical models are increasingly the focus of modern engineering as helpful tools for tailoring and optimization of custom-designed microstructures by suitable processing and alloy design. A huge variety of software tools is available to predict various microstructural aspects for different materials. In the general frame of an integrated computational materials engineering (ICME) approach, these microstructure models provide the link between models operating at the atomistic or electronic scales, and models operating on the macroscopic scale of the component and its processing. In view of an improved interoperability of all these different tools it is highly desirable to establish a standardized nomenclature and methodology for the exchange of microstructure data. The scope of this article is to provide a comprehensive system of metadata descriptors for the description of a 3D microstructure. The presented descriptors are limited to a mere geometric description of a static microstructure and have to be complemented by further descriptors, e.g. for properties, numerical representations, kinetic data, and others in the future. Further attributes to each descriptor, e.g. on data origin, data uncertainty, and data validity range are being defined in ongoing work. The proposed descriptors are intended to be independent of any specific numerical representation. The descriptors defined in this article may serve as a first basis for standardization and will simplify the data exchange between different numerical models, as well as promote the integration of experimental data into numerical models of microstructures. An HDF5 template data file for a simple, three phase Al-Cu microstructure being based on the defined descriptors complements this article.

A Descriptive and Interpretative Information System for the IODP

NASA Astrophysics Data System (ADS)

Blum, P.; Foster, P. A.; Mateo, Z.

2006-12-01

The ODP/IODP has a long and rich history of collecting descriptive and interpretative information (DESCINFO) from rock and sediment cores from the world's oceans. Unlike instrumental data, DESCINFO generated by subject experts is biased by the scientific and cultural background of the observers and their choices of classification schemes. As a result, global searches of DESCINFO and its integration with other data are problematical. To address this issue, the IODP-USIO is in the process of designing and implementing a DESCINFO system for IODP Phase 2 (2007-2013) that meets the user expectations expressed over the past decade. The requirements include support of (1) detailed, material property-based descriptions as well as classification-based descriptions; (2) global searches by physical sample and digital data sources as well as any of the descriptive parameters; (3) user-friendly data capture tools for a variety of workflows; and (4) extensive visualization of DESCINFO data along with instrumental data and images; and (5) portability/interoperability such that the system can work with database schemas of other organizations - a specific challenge given the schema and semantic heterogeneity not only among the three IODP operators but within the geosciences in general. The DESCINFO approach is based on the definition of a set of generic observable parameters that are populated with numeric or text values. Text values are derived from controlled, extensible hierarchical value lists that allow descriptions at the appropriate level of detail and ensure successful data searches. Material descriptions can be completed independently of domain-specific classifications, genetic concepts, and interpretative frameworks.

18 CFR 5.3 - Process selection.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Process selection. 5.3 Section 5.3 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE FEDERAL POWER ACT INTEGRATED LICENSE APPLICATION PROCESS § 5.3 Process...

Scaled Brownian motion: a paradoxical process with a time dependent diffusivity for the description of anomalous diffusion.

PubMed

Jeon, Jae-Hyung; Chechkin, Aleksei V; Metzler, Ralf

2014-08-14

Anomalous diffusion is frequently described by scaled Brownian motion (SBM), a Gaussian process with a power-law time dependent diffusion coefficient. Its mean squared displacement is 〈x(2)(t)〉 ≃ 2K(t)t with K(t) ≃ t(α-1) for 0 < α < 2. SBM may provide a seemingly adequate description in the case of unbounded diffusion, for which its probability density function coincides with that of fractional Brownian motion. Here we show that free SBM is weakly non-ergodic but does not exhibit a significant amplitude scatter of the time averaged mean squared displacement. More severely, we demonstrate that under confinement, the dynamics encoded by SBM is fundamentally different from both fractional Brownian motion and continuous time random walks. SBM is highly non-stationary and cannot provide a physical description for particles in a thermalised stationary system. Our findings have direct impact on the modelling of single particle tracking experiments, in particular, under confinement inside cellular compartments or when optical tweezers tracking methods are used.

Integrated Computer-Aided Manufacturing (ICAM) Architecture. Part 3. Volume 8. Technology Transfer.

DTIC Science & Technology

1983-09-01

AN’c MOp C O M P E T I T I V E D O S : 7 : .. .F ,- .,, Y T .. FINANCIAL RISK . "ON THE GO.ERM’" I2K_ IF, PROVIDES jNC-1.1,"L. TO-F, .NAKLS. ANC EIKN...RECENTLY, HO1WEVEP, :-XERNAL AND INTERNAL ENVIRONMENTAL PRESSURES HAVE FOCUSED; 7H GENERAL MANAGER’S AND HIS TOP FUNCTIONAL zTAF F’ S ATTENTION ON THE...SYSTieM DneFINITlO MEHOD Le He ~~~~h C~IDEF MEHDLGAIIAE etTERlog wNDElSTaDilG, tinTndaayisohhepolm COMMUNIATION, AN ANALYIS OF ESOLUTION. THE DENSIN IS

Property description and fact-finding report for NPR-3 Natrona County, Wyoming. Addendum to 22 August 1996 study of alternatives for future operations of the naval petroleum and oil shale reserves NPR-3

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The U.S. Department of Energy has asked Gustavson Associates, Inc. to serve as an Independent Petroleum Consultant under contract DE-AC01-96FE64202. This authorizes a study and recommendations regarding future development of Naval Petroleum Reserve No. 3 (NPR-3) in Natrona County, Wyoming. The report that follows is the Phase I fact-finding and property description for that study. The United States of America owns 100 percent of the mineral rights and surface rights in 9,321-acre NPR-3. This property comprises the Teapot Dome oil field and related production, processing and other facilities. Discovered in 1914, this field has 632 wells producing 1,807 barrels ofmore » oil per day. Production revenues are about $9.5 million per year. Remaining recoverable reserves are approximately 1.3 million barrels of oil. Significant plugging and abandonment (P&A) and environmental liabilities are present.« less

40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of the wood... Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam... process wastewater pollutants into publicly owned treatment works from wood preserving processes that use...

40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of the wood... Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam... process wastewater pollutants into publicly owned treatment works from wood preserving processes that use...

40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Applicability; description of the wood... Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam... process wastewater pollutants into publicly owned treatment works from wood preserving processes that use...

48 CFR 570.302 - Description of requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the lease. (2) Functional, performance, or physical requirements. (3) Any special requirements. (4... requirements. 570.302 Section 570.302 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION... Leasehold Interests in Real Property 570.302 Description of requirements. (a) The description of...

29 CFR 2520.102-3 - Contents of summary plan description.

Code of Federal Regulations, 2010 CFR

2010-07-01

... document that accompanies the plan's SPD, provided that the document satisfies the style and format... descriptive provisions in addition to those prescribed in paragraph (t)(2) of this section. However, the style... Office of Management and Budget under control number 1210-0039) [42 FR 37180, July 19, 1977, as amended...

Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

NASA Technical Reports Server (NTRS)

Callender, E. David; Steinbacher, Jody

1989-01-01

This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

Descriptive Geometry in Educational Process of Technical University in Russia Today

ERIC Educational Resources Information Center

Voronina, Marianna V.; Tretyakova, Zlata O.; Moroz, Olga N.; Folomkin, Andrey I.

2016-01-01

The relevance of the investigated problem is caused by the need for monitoring the impact of the Unified State Examination (USE) on the level of mathematical culture and the level of geometric literacy of applicants and students of modern engineering universities of Russia. The need to determine the position of Descriptive Geometry in the…

48 CFR 214.202-5 - Descriptive literature.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or equal...

48 CFR 214.202-5 - Descriptive literature.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or equal...

48 CFR 214.202-5 - Descriptive literature.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or equal...

48 CFR 214.202-5 - Descriptive literature.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or equal...

48 CFR 214.202-5 - Descriptive literature.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Descriptive literature. 214.202-5 Section 214.202-5 Federal Acquisition Regulations System DEFENSE ACQUISITION REGULATIONS... 214.202-5 Descriptive literature. (c) Requirements of invitation for bids. When brand name or equal...

The standards process: X3 information processing systems

NASA Technical Reports Server (NTRS)

Emard, Jean-Paul

1993-01-01

The topics are presented in viewgraph form and include the following: International Organization for Standards (ISO); International Electrotechnical Committee (IEC); ISO/IEC Joint Technical Committee 1 (JTC-1); U.S. interface to JTC-1; ANSI; national organizations; U.S. standards development processes; national and international standards developing organizations; regional organizations; and X3 information processing systems.

Feedback produces divergence from prospect theory in descriptive choice.

PubMed

Jessup, Ryan K; Bishara, Anthony J; Busemeyer, Jerome R

2008-10-01

A recent study demonstrated that individuals making experience-based choices underweight small probabilities, in contrast to the overweighting observed in a typical descriptive paradigm. We tested whether trial-by-trial feedback in a repeated descriptive paradigm would engender choices more correspondent with experiential or descriptive paradigms. The results of a repeated gambling task indicated that individuals receiving feedback underweighted small probabilities, relative to their no-feedback counterparts. These results implicate feedback as a critical component during the decision-making process, even in the presence of fully specified descriptive information. A model comparison at the individual-subject level suggested that feedback drove individuals' decision weights toward objective probability weighting.

Attending to Student Voice: The Impact of Descriptive Feedback on Learning and Teaching

ERIC Educational Resources Information Center

Rodgers, Carol R.

2006-01-01

This article explores the central role that description of experience, on the part of both teacher and students, plays in reflective practice. In particular, it highlights the power of students' description of their own learning as revealed to teachers in dialogue, a process I call "descriptive feedback." Descriptive feedback is neither…

An algorithm for automated layout of process description maps drawn in SBGN.

PubMed

Genc, Begum; Dogrusoz, Ugur

2016-01-01

Evolving technology has increased the focus on genomics. The combination of today's advanced techniques with decades of molecular biology research has yielded huge amounts of pathway data. A standard, named the Systems Biology Graphical Notation (SBGN), was recently introduced to allow scientists to represent biological pathways in an unambiguous, easy-to-understand and efficient manner. Although there are a number of automated layout algorithms for various types of biological networks, currently none specialize on process description (PD) maps as defined by SBGN. We propose a new automated layout algorithm for PD maps drawn in SBGN. Our algorithm is based on a force-directed automated layout algorithm called Compound Spring Embedder (CoSE). On top of the existing force scheme, additional heuristics employing new types of forces and movement rules are defined to address SBGN-specific rules. Our algorithm is the only automatic layout algorithm that properly addresses all SBGN rules for drawing PD maps, including placement of substrates and products of process nodes on opposite sides, compact tiling of members of molecular complexes and extensively making use of nested structures (compound nodes) to properly draw cellular locations and molecular complex structures. As demonstrated experimentally, the algorithm results in significant improvements over use of a generic layout algorithm such as CoSE in addressing SBGN rules on top of commonly accepted graph drawing criteria. An implementation of our algorithm in Java is available within ChiLay library (https://github.com/iVis-at-Bilkent/chilay). ugur@cs.bilkent.edu.tr or dogrusoz@cbio.mskcc.org Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press.

An algorithm for automated layout of process description maps drawn in SBGN

PubMed Central

Genc, Begum; Dogrusoz, Ugur

2016-01-01

Motivation: Evolving technology has increased the focus on genomics. The combination of today’s advanced techniques with decades of molecular biology research has yielded huge amounts of pathway data. A standard, named the Systems Biology Graphical Notation (SBGN), was recently introduced to allow scientists to represent biological pathways in an unambiguous, easy-to-understand and efficient manner. Although there are a number of automated layout algorithms for various types of biological networks, currently none specialize on process description (PD) maps as defined by SBGN. Results: We propose a new automated layout algorithm for PD maps drawn in SBGN. Our algorithm is based on a force-directed automated layout algorithm called Compound Spring Embedder (CoSE). On top of the existing force scheme, additional heuristics employing new types of forces and movement rules are defined to address SBGN-specific rules. Our algorithm is the only automatic layout algorithm that properly addresses all SBGN rules for drawing PD maps, including placement of substrates and products of process nodes on opposite sides, compact tiling of members of molecular complexes and extensively making use of nested structures (compound nodes) to properly draw cellular locations and molecular complex structures. As demonstrated experimentally, the algorithm results in significant improvements over use of a generic layout algorithm such as CoSE in addressing SBGN rules on top of commonly accepted graph drawing criteria. Availability and implementation: An implementation of our algorithm in Java is available within ChiLay library (https://github.com/iVis-at-Bilkent/chilay). Contact: ugur@cs.bilkent.edu.tr or dogrusoz@cbio.mskcc.org Supplementary information: Supplementary data are available at Bioinformatics online. PMID:26363029

Automatic Defect Detection for TFT-LCD Array Process Using Quasiconformal Kernel Support Vector Data Description

PubMed Central

Liu, Yi-Hung; Chen, Yan-Jen

2011-01-01

Defect detection has been considered an efficient way to increase the yield rate of panels in thin film transistor liquid crystal display (TFT-LCD) manufacturing. In this study we focus on the array process since it is the first and key process in TFT-LCD manufacturing. Various defects occur in the array process, and some of them could cause great damage to the LCD panels. Thus, how to design a method that can robustly detect defects from the images captured from the surface of LCD panels has become crucial. Previously, support vector data description (SVDD) has been successfully applied to LCD defect detection. However, its generalization performance is limited. In this paper, we propose a novel one-class machine learning method, called quasiconformal kernel SVDD (QK-SVDD) to address this issue. The QK-SVDD can significantly improve generalization performance of the traditional SVDD by introducing the quasiconformal transformation into a predefined kernel. Experimental results, carried out on real LCD images provided by an LCD manufacturer in Taiwan, indicate that the proposed QK-SVDD not only obtains a high defect detection rate of 96%, but also greatly improves generalization performance of SVDD. The improvement has shown to be over 30%. In addition, results also show that the QK-SVDD defect detector is able to accomplish the task of defect detection on an LCD image within 60 ms. PMID:22016625

Automatic defect detection for TFT-LCD array process using quasiconformal kernel support vector data description.

PubMed

Liu, Yi-Hung; Chen, Yan-Jen

2011-01-01

Defect detection has been considered an efficient way to increase the yield rate of panels in thin film transistor liquid crystal display (TFT-LCD) manufacturing. In this study we focus on the array process since it is the first and key process in TFT-LCD manufacturing. Various defects occur in the array process, and some of them could cause great damage to the LCD panels. Thus, how to design a method that can robustly detect defects from the images captured from the surface of LCD panels has become crucial. Previously, support vector data description (SVDD) has been successfully applied to LCD defect detection. However, its generalization performance is limited. In this paper, we propose a novel one-class machine learning method, called quasiconformal kernel SVDD (QK-SVDD) to address this issue. The QK-SVDD can significantly improve generalization performance of the traditional SVDD by introducing the quasiconformal transformation into a predefined kernel. Experimental results, carried out on real LCD images provided by an LCD manufacturer in Taiwan, indicate that the proposed QK-SVDD not only obtains a high defect detection rate of 96%, but also greatly improves generalization performance of SVDD. The improvement has shown to be over 30%. In addition, results also show that the QK-SVDD defect detector is able to accomplish the task of defect detection on an LCD image within 60 ms.

Basic Skills: Quality Education Program Study. Booklet 3 (Description) and Booklet 3A (Needs Assessment).

ERIC Educational Resources Information Center

Bucks County Public Schools, Doylestown, PA.

Categories of effective and ineffective behavior in regard to Goal Three of the Quality Education Program (regarding basic skills) are listed. Both the rationales for areas of effective student behavior and the categories of teacher strategies are also included. (See TM 001 375 for project description.) (MS)

10 CFR 960.3-2 - Siting process.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 10 Energy 4 2012-01-01 2012-01-01 false Siting process. 960.3-2 Section 960.3-2 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2 Siting process. The siting process begins with site screening...

10 CFR 960.3-2 - Siting process.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 10 Energy 4 2011-01-01 2011-01-01 false Siting process. 960.3-2 Section 960.3-2 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2 Siting process. The siting process begins with site screening...

10 CFR 960.3-2 - Siting process.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 10 Energy 4 2013-01-01 2013-01-01 false Siting process. 960.3-2 Section 960.3-2 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2 Siting process. The siting process begins with site screening...

10 CFR 960.3-2 - Siting process.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 10 Energy 4 2014-01-01 2014-01-01 false Siting process. 960.3-2 Section 960.3-2 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE PRELIMINARY SCREENING OF POTENTIAL SITES FOR A NUCLEAR WASTE REPOSITORY Implementation Guidelines § 960.3-2 Siting process. The siting process begins with site screening...

Process for 3D chip stacking

DOEpatents

Malba, V.

1998-11-10

A manufacturable process for fabricating electrical interconnects which extend from a top surface of an integrated circuit chip to a sidewall of the chip using laser pantography to pattern three dimensional interconnects. The electrical interconnects may be of an L-connect or L-shaped type. The process implements three dimensional (3D) stacking by moving the conventional bond or interface pads on a chip to the sidewall of the chip. Implementation of the process includes: (1) holding individual chips for batch processing, (2) depositing a dielectric passivation layer on the top and sidewalls of the chips, (3) opening vias in the dielectric, (4) forming the interconnects by laser pantography, and (5) removing the chips from the holding means. The process enables low cost manufacturing of chips with bond pads on the sidewalls, which enables stacking for increased performance, reduced space, and higher functional per unit volume. 3 figs.

Automatic classification of written descriptions by healthy adults: An overview of the application of natural language processing and machine learning techniques to clinical discourse analysis.

PubMed

Toledo, Cíntia Matsuda; Cunha, Andre; Scarton, Carolina; Aluísio, Sandra

2014-01-01

Discourse production is an important aspect in the evaluation of brain-injured individuals. We believe that studies comparing the performance of brain-injured subjects with that of healthy controls must use groups with compatible education. A pioneering application of machine learning methods using Brazilian Portuguese for clinical purposes is described, highlighting education as an important variable in the Brazilian scenario. The aims were to describe how to:(i) develop machine learning classifiers using features generated by natural language processing tools to distinguish descriptions produced by healthy individuals into classes based on their years of education; and(ii) automatically identify the features that best distinguish the groups. The approach proposed here extracts linguistic features automatically from the written descriptions with the aid of two Natural Language Processing tools: Coh-Metrix-Port and AIC. It also includes nine task-specific features (three new ones, two extracted manually, besides description time; type of scene described - simple or complex; presentation order - which type of picture was described first; and age). In this study, the descriptions by 144 of the subjects studied in Toledo 18 were used,which included 200 healthy Brazilians of both genders. A Support Vector Machine (SVM) with a radial basis function (RBF) kernel is the most recommended approach for the binary classification of our data, classifying three of the four initial classes. CfsSubsetEval (CFS) is a strong candidate to replace manual feature selection methods.

Automatic classification of written descriptions by healthy adults: An overview of the application of natural language processing and machine learning techniques to clinical discourse analysis

PubMed Central

Toledo, Cíntia Matsuda; Cunha, Andre; Scarton, Carolina; Aluísio, Sandra

2014-01-01

Discourse production is an important aspect in the evaluation of brain-injured individuals. We believe that studies comparing the performance of brain-injured subjects with that of healthy controls must use groups with compatible education. A pioneering application of machine learning methods using Brazilian Portuguese for clinical purposes is described, highlighting education as an important variable in the Brazilian scenario. Objective The aims were to describe how to: (i) develop machine learning classifiers using features generated by natural language processing tools to distinguish descriptions produced by healthy individuals into classes based on their years of education; and (ii) automatically identify the features that best distinguish the groups. Methods The approach proposed here extracts linguistic features automatically from the written descriptions with the aid of two Natural Language Processing tools: Coh-Metrix-Port and AIC. It also includes nine task-specific features (three new ones, two extracted manually, besides description time; type of scene described – simple or complex; presentation order – which type of picture was described first; and age). In this study, the descriptions by 144 of the subjects studied in Toledo18 were used,which included 200 healthy Brazilians of both genders. Results and Conclusion A Support Vector Machine (SVM) with a radial basis function (RBF) kernel is the most recommended approach for the binary classification of our data, classifying three of the four initial classes. CfsSubsetEval (CFS) is a strong candidate to replace manual feature selection methods. PMID:29213908

Ship Maintenance Processes with Collaborative Product Lifecycle Management and 3D Terrestrial Laser Scanning Tools: Reducing Costs and Increasing Productivity

DTIC Science & Technology

2011-04-30

developed the Knowledge Value Added + Systems Dynamics + Integrated Risk Management (KVA+SD+IRM) valuation framework to address these issues. KVA+SD...SD+IRM framework is used to quantify process cost savings and the potential benefits of selecting collab-PLM+3D TLS technology in the ship SHIPMAIN...The first section of this paper explicates the KVA+SD+IRM framework . In section two, a description of the SHIPMAIN program is provided. The third

32 CFR 734.3 - Service of process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... receipt of such legal process, it will be forwarded directly to: Defense Finance and Accounting Service... 32 National Defense 5 2010-07-01 2010-07-01 false Service of process. 734.3 Section 734.3 National... MILITARY AND CIVILIAN PERSONNEL FOR COLLECTION OF CHILD SUPPORT AND ALIMONY § 734.3 Service of process. (a...

Children's food choice process in the home environment. A qualitative descriptive study.

PubMed

Holsten, Joanna E; Deatrick, Janet A; Kumanyika, Shiriki; Pinto-Martin, Jennifer; Compher, Charlene W

2012-02-01

This qualitative descriptive study explored children's food choices in the home with particular attention to environmental influences. Semi-structured interviews were conducted with 11- to 14-year-old children (n=47) from one middle school. A data-driven content analysis using selected principles of grounded theory was performed. Children's food choices in the home emerged as a process that involved three interacting components, the child, the parent, and the food, embedded within the context of time. Children's structured activities throughout the day, week, and year provided an overall context for food choices. Parents affected children's food choices through their presence in the home, time pressure and activity prioritization, incorporation of family members' preferences, food preparation effort and skills, and financial and health concerns. Parents created food options through food purchasing and preparation and indirectly affected children's food choices by setting rules, providing information, and modeling behaviors. Children affected parents' decisions by communicating food preferences. For children, important aspects of the food itself included its availability at home and attributes related to taste, preparation, and cost. Children evaluated potential food options based on their hunger level, food preferences, time pressure and activity prioritization, food preparation effort and skills, and expected physical consequences of food. Copyright © 2011 Elsevier Ltd. All rights reserved.

Decomposing phenotype descriptions for the human skeletal phenome.

PubMed

Groza, Tudor; Hunter, Jane; Zankl, Andreas

2013-01-01

Over the course of the last few years there has been a significant amount of research performed on ontology-based formalization of phenotype descriptions. The intrinsic value and knowledge captured within such descriptions can only be expressed by taking advantage of their inner structure that implicitly combines qualities and anatomical entities. We present a meta-model (the Phenotype Fragment Ontology) and a processing pipeline that enable together the automatic decomposition and conceptualization of phenotype descriptions for the human skeletal phenome. We use this approach to showcase the usefulness of the generic concept of phenotype decomposition by performing an experimental study on all skeletal phenotype concepts defined in the Human Phenotype Ontology.

Comparing Freshman and doctoral engineering students in design: mapping with a descriptive framework

NASA Astrophysics Data System (ADS)

Carmona Marques, P.

2017-11-01

This paper reports the results of a study of engineering students' approaches to an open-ended design problem. To carry out this, sketches and interviews were collected from 9 freshmen (first year) and 10 doctoral engineering students, when they designed solutions for orange squeezers. Sketches and interviews were analysed and mapped with a descriptive 'ideation framework' (IF) of the design process, to document and compare their design creativity (Carmona Marques, P., A. Silva, E. Henriques, and C. Magee. 2014. "A Descriptive Framework of the Design Process from a Dual Cognitive Engineering Perspective." International Journal of Design Creativity and Innovation 2 (3): 142-164). The results show that the designers worked in a manner largely consistent with the IF for generalisation and specialisation loops. Also, doctoral students produced more alternative solutions during the ideation process. In addition, compared to freshman, doctoral used the generalisation loop of the IF, working at higher levels of abstraction. The iterative nature of design is highlighted during this study - a potential contribution to decrease the gap between both groups in engineering education.

A Measurable Model of the Creative Process in the Context of a Learning Process

ERIC Educational Resources Information Center

Ma, Min; Van Oystaeyen, Fred

2016-01-01

The authors' aim was to arrive at a measurable model of the creative process by putting creativity in the context of a learning process. The authors aimed to provide a rather detailed description of how creative thinking fits in a general description of the learning process without trying to go into an analysis of a biological description of the…

Description and recognition of faces from 3D data

NASA Astrophysics Data System (ADS)

Coombes, Anne M.; Richards, Robin; Linney, Alfred D.; Bruce, Vicki; Fright, Rick

1992-12-01

A method based on differential geometry, is presented for mathematically describing the shape of the facial surface. Three-dimensional data for the face are collected by optical surface scanning. The method allows the segmentation of the face into regions of a particular `surface type,' according to the surface curvature. Eight different surface types are produced which all have perceptually meaningful interpretations. The correspondence of the surface type regions to the facial features are easily visualized, allowing a qualitative assessment of the face. A quantitative description of the face in terms of the surface type regions can be produced and the variation of the description between faces is demonstrated. A set of optical surface scans can be registered together and averages to produce an average male and average female face. Thus an assessment of how individuals vary from the average can be made as well as a general statement about the differences between male and female faces. This method will enable an investigation to be made as to how reliably faces can be individuated by their surface shape which, if feasible, may be the basis of an automatic system for recognizing faces. It also has applications in physical anthropology, for classification of the face, facial reconstructive surgery, to quantify the changes in a face altered by reconstructive surgery and growth, and in visual perception, to assess the recognizability of faces. Examples of some of these applications are presented.

Perceptions of Breast Cancer Survivors on the Supporting Practices of Their Supervisors in the Return-to-Work Process: A Qualitative Descriptive Study.

PubMed

Caron, Maryse; Durand, Marie-José; Tremblay, Dominique

2018-03-01

Purpose Supervisors are known to be key actors in ensuring the success of absent employees in their return-to-work process. However, to date, little is known about the perceptions of breast cancer survivors on the practices put in place by their supervisors to support them during this process. The objective of this study was to describe the perceptions of breast cancer survivors on the practices put in place by their supervisors to support them during their return-to-work process. Method A qualitative descriptive study was conducted. Semi-structured interviews were carried out with breast cancer survivors (n = 10) who had returned to work after treatment and were still at work more than 18 months later. Each interview was audio recorded and then transcribed verbatim for qualitative thematic content analysis using a semi-open codification framework. Results Participants identified three main practices put in place by their supervisors to support them and which they perceived as particularly helpful during the return-to-work process: (1) maintaining communication during their period of absence; (2) working with them to structure their return-to-work process before their actual return; and (3) allowing them flexibility in their schedule for a certain period, particularly at the beginning of the return-to-work process. Breast cancer survivors also identified an omission in the practice of employers: lack of follow-up over time. Conclusion Knowledge about the practices perceived as helpful by breast cancer survivors during their return-to-work process lays the groundwork for the eventual development of services to help breast cancer survivors in their return to work.

Response Processes During the Description of Others

ERIC Educational Resources Information Center

Minor, Michael J.; Fiske, Donald W.

1976-01-01

Response processes of undergraduates describing familiar peers of the same sex were investigated. Subjects described persons by responding to items adapted from Jackson's Personality Research Form. Subjects also reported item ambiguity, inappropriateness, etc. Results suggest that similar processes are involved in describing self and others.…

Country-specific dietary patterns and associations with socioeconomic status in European children: the IDEFICS study.

PubMed

Fernández-Alvira, J M; Bammann, K; Pala, V; Krogh, V; Barba, G; Eiben, G; Hebestreit, A; Veidebaum, T; Reisch, L; Tornaritis, M; Kovacs, E; Huybrechts, I; Moreno, L A

2014-07-01

Children from lower socioeconomic status (SES) may be at higher risk of unhealthy eating. We described country-specific dietary patterns among children aged 2-9 years from eight European countries participating in the IDEFICS study and assessed the association of dietary patterns with an additive SES indicator. Children aged 2-9 years from eight European countries were recruited in 2007-2008. Principal component analysis was applied to identify dietary country-specific patterns. Linear regression analyses were applied to assess their association with SES. Two to four dietary patterns were identified in the participating regions. The existence of a 'processed' pattern was found in the eight regions. Also, a 'healthy' pattern was identified in seven of the eight regions. In addition, region-specific patterns were identified, reflecting the existing gastronomic and cultural differences in Europe. The 'processed' pattern was significantly inversely associated with the SES additive indicator in all countries except Sweden, whereas the 'healthy' pattern was positively associated with SES in the Belgian, Estonian, German and Hungarian regions, but was not significant in the Italian, Spanish and Swedish regions. A 'processed' pattern and a 'healthy' pattern were found in most of the participating countries in the IDEFICS study, with comparable food item profiles. The results showed a strong inverse association of SES with the 'processed' pattern, suggesting that children of parents with lower SES may be at higher risk of unhealthy eating. Therefore, special focus should be given to parents and their children from lower SES levels when developing healthy eating promotion strategies.

Superspace description of the homologous series Ga2O3(ZnO)m.

PubMed

Michiue, Yuichi; Kimizuka, Noboru

2010-04-01

A unified description for the structures of the homologous series Ga(2)O(3)(ZnO)(m), gallium zinc oxide, is presented using the superspace formalism. The structures were treated as a compositely modulated structure consisting of two subsystems. One is constructed with metal ions and the other with O ions. The ideal model is given, in which the displacive modulations of ions are well described by the zigzag function with large amplitudes. Alternative settings are also proposed which are analogous to the so-called modular structures. The validity of the model has been confirmed by refinements for phases with m = 6 and m = 9 in the homologous series. A few complex phenomena in real structures are taken into account by modifying the ideal model.

Space Station Program Description Document. Books 1-7

NASA Technical Reports Server (NTRS)

1984-01-01

The Space Station Program Description Document is summarized. The six volumes include: (1) introduction and summary; (2) mission description; (3) systems requirements and characteristics; (4) advanced development; (6) system operations; and (7) program plan. Volume 5 was deleted as a separate book.

The 3-Dimensional Fermi Liquid Description for the Iron-Based Superconductors

NASA Astrophysics Data System (ADS)

Misawa, Setsuo

2018-01-01

The quasiparticles in the normal state of iron-based superconductors have been shown to behave universally as a 3-dimensional Fermi liquid. Because of interactions and the presence of sharp Fermi surfaces, the quasiparticle energy contains, as a function of the momentum \\varvec{p}, a term of the form ( p - p_0)^3 ln {( |p-p_0|/p_0)} , where p = | \\varvec{p} | and p_0 is the Fermi momentum. The electronic specific heat coefficient, magnetic susceptibility (Knight shift), electrical resistivity, Hall coefficient and thermoelectric power divided by temperature follow, as functions of temperature T, the logarithmic formula a-b T^2 ln {(T/T^*)}, a, b and T^* being constant; these formulae have been shown to explain the observed data for all iron-based superconductors. It is shown that the concept of non-Fermi liquids or anomalous metals which appears in the literature is not needed for descriptions of the present systems. When the superconducting transition temperature TC and the b / a value for the resistivity are plotted as functions of the doping content x, there appear various characteristic diagrams in which regions of positive correlation and those of negative correlation between TC and b / a are interconnected; from these diagrams, we may make speculations about the types of superconductivity and the crossover between them.

Semi-Formal Description of KVM/370 Trusted Processes

DTIC Science & Technology

1977-12-09

OF KVM/370 TRUSTED PROCESSES 9I OTICD. H. THOMPSON SELECTEU JAN 5 IM8 , 9 DECEMBER 1977 D CLEARED FOR OPEN...Record Process TM-6062/111/00 OP15a: Start (Re der) given: Raddr: DeviceAddress NewClasses: set of Class entry: for some (R:ReaderEmtry) In Readers...Corporatio PRPU1: Process request for output spooling device assignment given: Process : ProcessName RequestedClassest set of Class entry: true error on for

45 CFR 501.3 - Service of process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 3 2010-10-01 2010-10-01 false Service of process. 501.3 Section 501.3 Public... UNITED STATES, DEPARTMENT OF JUSTICE RULES OF PRACTICE SUBPOENAS, DEPOSITIONS, AND OATHS § 501.3 Service of process. (a) By whom served. The Commission will serve all orders, notices and other papers issued...

Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

PubMed

Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

2016-09-01

Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

40 CFR 429.100 - Applicability; description of the wet storage subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Applicability; description of the wet... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wet Storage Subcategory § 429.100 Applicability; description of the wet storage subcategory. This subpart applies to...

40 CFR 429.100 - Applicability; description of the wet storage subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the wet... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wet Storage Subcategory § 429.100 Applicability; description of the wet storage subcategory. This subpart applies to...

48 CFR 47.207-3 - Description of shipment, origin, and destination.

Code of Federal Regulations, 2014 CFR

2014-10-01

... contracting officer shall include in solicitations full details regarding the location from which the freight is to be shipped. For example, if a single location is shown, furnish the shipper's name, street..., including boundaries and ZIP codes. (c) Description of the freight. The contracting officer shall include in...

48 CFR 47.207-3 - Description of shipment, origin, and destination.

Code of Federal Regulations, 2010 CFR

2010-10-01

... contracting officer shall include in solicitations full details regarding the location from which the freight is to be shipped. For example, if a single location is shown, furnish the shipper's name, street..., including boundaries and ZIP codes. (c) Description of the freight. The contracting officer shall include in...

48 CFR 47.207-3 - Description of shipment, origin, and destination.

Code of Federal Regulations, 2013 CFR

2013-10-01

... contracting officer shall include in solicitations full details regarding the location from which the freight is to be shipped. For example, if a single location is shown, furnish the shipper's name, street..., including boundaries and ZIP codes. (c) Description of the freight. The contracting officer shall include in...

48 CFR 47.207-3 - Description of shipment, origin, and destination.

Code of Federal Regulations, 2011 CFR

2011-10-01

... contracting officer shall include in solicitations full details regarding the location from which the freight is to be shipped. For example, if a single location is shown, furnish the shipper's name, street..., including boundaries and ZIP codes. (c) Description of the freight. The contracting officer shall include in...

48 CFR 47.207-3 - Description of shipment, origin, and destination.

Code of Federal Regulations, 2012 CFR

2012-10-01

... contracting officer shall include in solicitations full details regarding the location from which the freight is to be shipped. For example, if a single location is shown, furnish the shipper's name, street..., including boundaries and ZIP codes. (c) Description of the freight. The contracting officer shall include in...

A simulation model for wind energy storage systems. Volume 3: Program descriptions

NASA Technical Reports Server (NTRS)

Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

1977-01-01

Program descriptions, flow charts, and program listings for the SIMWEST model generation program, the simulation program, the file maintenance program, and the printer plotter program are given. For Vol 2, see .

IDEA Technical Report No. 3. Description of Data Base, 1977-78.

ERIC Educational Resources Information Center

Cashin, William E.; Slawson, Hugh M.

The data and computational procedures used by the IDEA System during the 1977-78 academic year at Kansas State University to interpret ratings of teacher performance are described in this technical report. The computations for each of the seven parts (evaluation, course description, students' self-ratings, methods, additional questions, diagnostic…

40 CFR 407.20 - Applicability; description of the apple products subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the apple... SOURCE CATEGORY Apple Products Subcategory § 407.20 Applicability; description of the apple products... apples into apple products. The processing of apples into caustic peeled or dehydrated products is...

40 CFR 407.20 - Applicability; description of the apple products subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the apple... SOURCE CATEGORY Apple Products Subcategory § 407.20 Applicability; description of the apple products... apples into apple products. The processing of apples into caustic peeled or dehydrated products is...

40 CFR 407.20 - Applicability; description of the apple products subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the apple... SOURCE CATEGORY Apple Products Subcategory § 407.20 Applicability; description of the apple products... apples into apple products. The processing of apples into caustic peeled or dehydrated products is...

40 CFR 407.20 - Applicability; description of the apple products subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the apple... SOURCE CATEGORY Apple Products Subcategory § 407.20 Applicability; description of the apple products... apples into apple products. The processing of apples into caustic peeled or dehydrated products is...

40 CFR 471.80 - Applicability; description of the zinc forming subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the zinc... CATEGORY Zinc Forming Subcategory § 471.80 Applicability; description of the zinc forming subcategory. This... pollutants into publicly owned treatment works from the process operations of the zinc forming subcategory. ...

40 CFR 471.80 - Applicability; description of the zinc forming subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Applicability; description of the zinc... CATEGORY Zinc Forming Subcategory § 471.80 Applicability; description of the zinc forming subcategory. This... pollutants into publicly owned treatment works from the process operations of the zinc forming subcategory. ...

Data analysis software for the autoradiographic enhancement process. Volumes 1, 2, and 3, and appendix

NASA Technical Reports Server (NTRS)

Singh, S. P.

1979-01-01

The computer software developed to set up a method for Wiener spectrum analysis of photographic films is presented. This method is used for the quantitative analysis of the autoradiographic enhancement process. The software requirements and design for the autoradiographic enhancement process are given along with the program listings and the users manual. A software description and program listings modification of the data analysis software are included.

Description of the Process Model for the Technoeconomic Evaluation of MEA versus Mixed Amines for Carbon Dioxide Removal from Stack Gas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Dale A.

This model description is supplemental to the Lawrence Livermore National Laboratory (LLNL) report LLNL-TR-642494, Technoeconomic Evaluation of MEA versus Mixed Amines for CO2 Removal at Near- Commercial Scale at Duke Energy Gibson 3 Plant. We describe the assumptions and methodology used in the Laboratory’s simulation of its understanding of Huaneng’s novel amine solvent for CO2 capture with 35% mixed amine. The results of that simulation have been described in LLNL-TR-642494. The simulation was performed using ASPEN 7.0. The composition of the Huaneng’s novel amine solvent was estimated based on information gleaned from Huaneng patents. The chemistry of the process wasmore » described using nine equations, representing reactions within the absorber and stripper columns using the ELECTNRTL property method. As a rate-based ASPEN simulation model was not available to Lawrence Livermore at the time of writing, the height of a theoretical plate was estimated using open literature for similar processes. Composition of the flue gas was estimated based on information supplied by Duke Energy for Unit 3 of the Gibson plant. The simulation was scaled at one million short tons of CO2 absorbed per year. To aid stability of the model, convergence of the main solvent recycle loop was implemented manually, as described in the Blocks section below. Automatic convergence of this loop led to instability during the model iterations. Manual convergence of the loop enabled accurate representation and maintenance of model stability.« less

Cogeneration Technology Alternatives Study (CTAS). Volume 3: Industrial processes

NASA Technical Reports Server (NTRS)

Palmer, W. B.; Gerlaugh, H. E.; Priestley, R. R.

1980-01-01

Cogenerating electric power and process heat in single energy conversion systems rather than separately in utility plants and in process boilers is examined in terms of cost savings. The use of various advanced energy conversion systems are examined and compared with each other and with current technology systems for their savings in fuel energy, costs, and emissions in individual plants and on a national level. About fifty industrial processes from the target energy consuming sectors were used as a basis for matching a similar number of energy conversion systems that are considered as candidate which can be made available by the 1985 to 2000 time period. The sectors considered included food, textiles, lumber, paper, chemicals, petroleum, glass, and primary metals. The energy conversion systems included steam and gas turbines, diesels, thermionics, stirling, closed cycle and steam injected gas turbines, and fuel cells. Fuels considered were coal, both coal and petroleum based residual and distillate liquid fuels, and low Btu gas obtained through the on site gasification of coal. An attempt was made to use consistent assumptions and a consistent set of ground rules specified by NASA for determining performance and cost. Data and narrative descriptions of the industrial processes are given.

Process for 3D chip stacking

DOEpatents

Malba, Vincent

1998-01-01

A manufacturable process for fabricating electrical interconnects which extend from a top surface of an integrated circuit chip to a sidewall of the chip using laser pantography to pattern three dimensional interconnects. The electrical interconnects may be of an L-connect or L-shaped type. The process implements three dimensional (3D) stacking by moving the conventional bond or interface pads on a chip to the sidewall of the chip. Implementation of the process includes: 1) holding individual chips for batch processing, 2) depositing a dielectric passivation layer on the top and sidewalls of the chips, 3) opening vias in the dielectric, 4) forming the interconnects by laser pantography, and 5) removing the chips from the holding means. The process enables low cost manufacturing of chips with bond pads on the sidewalls, which enables stacking for increased performance, reduced space, and higher functional per unit volume.

Development of a toolkit to enhance care processes for people with a long-term neurological condition: a qualitative descriptive study.

PubMed

Sezier, Ann; Mudge, Suzie; Kayes, Nicola; Kersten, Paula; Payne, Deborah; Harwood, Matire; Potter, Eden; Smith, Greta; McPherson, Kathryn M

2018-06-30

To (A) explore perspectives of people with a long-term neurological condition, and of their family, clinicians and other stakeholders on three key processes: two-way communication, self-management and coordination of long-term care; and (B) use these data to develop a 'Living Well Toolkit', a structural support aiming to enhance the quality of these care processes. This qualitative descriptive study drew on the principles of participatory research. Data from interviews and focus groups with participants (n=25) recruited from five hospital, rehabilitation and community settings in New Zealand were analysed using conventional content analysis. Consultation with a knowledge-user group (n=4) and an implementation champion group (n=4) provided additional operational knowledge important to toolkit development and its integration into clinical practice. Four main, and one overarching, themes were constructed: (1) tailoring care: referring to getting to know the person and their individual circumstances; (2) i nvolving others: representing the importance of negotiating the involvement of others in the person's long-term management process; (3) exchanging knowledge: referring to acknowledging patient expertise; and (4) enabling: highlighting the importance of empowering relationships and processes. The overarching theme was: a ssume nothing . These themes informed the development of a toolkit comprising of two parts: one to support the person with the long-term neurological condition, and one targeted at clinicians to guide interaction and support their engagement with patients. Perspectives of healthcare users, clinicians and other stakeholders were fundamental to the development of the Living Well Toolkit. The findings were used to frame toolkit specifications and highlighted potential operational issues that could prove key to its success. Further research to evaluate its use is now underway. © Article author(s) (or their employer(s) unless otherwise stated in the text

Organization Domain Modeling. Volume 1. Conceptual Foundations, Process and Workproduct Description

DTIC Science & Technology

1993-07-31

J.A. Hess, W.E. Novak, and A.S. Peterson. Feature-Oriented Domain Analysis ( FODA ) Feasibility Study. Technical Report CMU/SEI-90-TR-21, Software...domain analysis (DA) and modeling, including a structured set of workproducts, a tailorable process model and a set of modeling techniques and guidelines...23 5.3.1 U sability Analysis (Rescoping) ..................................................... 24

Descriptive Biomarkers for Assessing Breast Cancer Risk

DTIC Science & Technology

2009-10-01

0721 TITLE: Descriptive Biomarkers for Assessing Breast Cancer Risk PRINCIPAL INVESTIGATOR: Kathleen F. Arcaro...Annual 3. DATES COVERED (From - To) 15 Sept 2008 - 14 Sept 2009 4. TITLE AND SUBTITLE Descriptive Biomarkers for Assessing Breast Cancer Risk 5a...SUPPLEMENTARY NOTES 14. ABSTRACT The purpose of this research is to determine if exfoliated epithelial cells present in breast milk can be used to assess

High-Level Waste System Process Interface Description

DOE Office of Scientific and Technical Information (OSTI.GOV)

d'Entremont, P.D.

1999-01-14

The High-Level Waste System is a set of six different processes interconnected by pipelines. These processes function as one large treatment plant that receives, stores, and treats high-level wastes from various generators at SRS and converts them into forms suitable for final disposal. The three major forms are borosilicate glass, which will be eventually disposed of in a Federal Repository, Saltstone to be buried on site, and treated water effluent that is released to the environment.

49 CFR 572.141 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-year-Old Child Crash Test Dummy, Alpha Version § 572.141 General description. (a) The Hybrid III 3-year-old child dummy is described by the following materials: (1) Technical drawings and specifications package 210-0000 (refer to...

Andrew integrated reservoir description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, S.P.

1996-12-31

The Andrew field is an oil and gas accumulation in Palaeocene deep marine sands in the Central North Sea. It is currently being developed with mainly horizontal oil producers. Because of the field`s relatively small reserves (mean 118 mmbbls), the performance of each of the 10 or so horizontal wells is highly important. Reservoir description work at sanction time concentrated on supporting the case that the field could be developed commercially with the minimum number of wells. The present Integrated Reservoir Description (IRD) is focussed on delivering the next level of detail that will impact the understanding of the localmore » reservoir architecture and dynamic performance of each well. Highlights of Andrew IRD Include: (1) Use of a Reservoir Uncertainty Statement (RUS) developed at sanction time to focus the descriptive effort of both asset, support and contract petrotechnical staff, (2) High resolution biostratigraphic correlation to support confident zonation of the reservoir, (3) Detailed sedimentological analysis of the core including the use of dipmeter to interpret channel/sheet architecture to provide new insights into reservoir heterogeneity; (4) Integrated petrographical and petrophysical investigation of the controls on Sw-Height and relative permeability of water; (5) Fluids description using oil geochemistry and Residual Salt Analysis Sr isotope studies. Andrew IRD has highlighted several important risks to well performance, including the influence of more heterolithic intervals on gas breakthrough and the controls on water coning exerted by suppressed water relative permeability in the transition zone.« less

Andrew integrated reservoir description

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, S.P.

1996-01-01

The Andrew field is an oil and gas accumulation in Palaeocene deep marine sands in the Central North Sea. It is currently being developed with mainly horizontal oil producers. Because of the field's relatively small reserves (mean 118 mmbbls), the performance of each of the 10 or so horizontal wells is highly important. Reservoir description work at sanction time concentrated on supporting the case that the field could be developed commercially with the minimum number of wells. The present Integrated Reservoir Description (IRD) is focussed on delivering the next level of detail that will impact the understanding of the localmore » reservoir architecture and dynamic performance of each well. Highlights of Andrew IRD Include: (1) Use of a Reservoir Uncertainty Statement (RUS) developed at sanction time to focus the descriptive effort of both asset, support and contract petrotechnical staff, (2) High resolution biostratigraphic correlation to support confident zonation of the reservoir, (3) Detailed sedimentological analysis of the core including the use of dipmeter to interpret channel/sheet architecture to provide new insights into reservoir heterogeneity; (4) Integrated petrographical and petrophysical investigation of the controls on Sw-Height and relative permeability of water; (5) Fluids description using oil geochemistry and Residual Salt Analysis Sr isotope studies. Andrew IRD has highlighted several important risks to well performance, including the influence of more heterolithic intervals on gas breakthrough and the controls on water coning exerted by suppressed water relative permeability in the transition zone.« less

40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the wood... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam subcategory...

40 CFR 429.80 - Applicability; description of the wood preserving-steam subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Applicability; description of the wood... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS TIMBER PRODUCTS PROCESSING POINT SOURCE CATEGORY Wood Preserving Steam Subcategory § 429.80 Applicability; description of the wood preserving—steam subcategory...

22 CFR 5.3 - Rules of procedure, description of forms available or the places at which forms may be obtained...

Code of Federal Regulations, 2010 CFR

2010-04-01

... ORGANIZATION § 5.3 Rules of procedure, description of forms available or the places at which forms may be...., Washington, DC 20520. International educational and cultural exchange program Bureau of Educational and Cultural Affairs Department of State, 2201 C Street NW., Washington, DC 20520. International traffic in...

Women’s perspectives of the fetal fibronectin testing process: a qualitative descriptive study

PubMed Central

2014-01-01

Background In 2009 the Ontario Ministry of Health and Long Term Care funded the implementation of province-wide fetal fibronectin testing in Ontario hospitals. This paper reports results from the provincial evaluation that sought to describe the experience of fetal fibronectin testing from the perspective of women with symptoms of preterm labour. Methods A descriptive qualitative design was used, employing semi-structured telephone and face-to-face interviews with women who had fetal fibronectin testing. Results Five hospitals participated in recruiting women for the study and 17 women were interviewed. Women described their experiences of fetal fibronectin testing as an emotional process that moves from expecting, to feeling, to hoping for reassurance; and then to re-defining what is required to feel reassured. Women described feeling anxious while waiting for fetal fibronectin results. When test results were negative, women described feeling a sense of relief that their symptoms would not likely lead to an imminent preterm birth. Women with positive results expressed feeling reassured by the care decisions and quick action taken by the health care team. Conclusion Fetal fibronectin testing was acceptable and beneficial to these women with symptoms of preterm labour. Implications for practice and future research are suggested. PMID:24894630

Deep space network Mark 4A description

NASA Technical Reports Server (NTRS)

Wallace, R. J.; Burt, R. W.

1986-01-01

The general system configuration for the Mark 4A Deep Space Network is described. The arrangement and complement of antennas at the communications complexes and subsystem equipment at the signal processing centers are described. A description of the Network Operations Control Center is also presented.

Project description and crowdfunding success: an exploratory study.

PubMed

Zhou, Mi Jamie; Lu, Baozhou; Fan, Weiguo Patrick; Wang, G Alan

2018-01-01

Existing research on antecedent of funding success mainly focuses on basic project properties such as funding goal, duration, and project category. In this study, we view the process by which project owners raise funds from backers as a persuasion process through project descriptions. Guided by the unimodel theory of persuasion, this study identifies three exemplary antecedents (length, readability, and tone) from the content of project descriptions and two antecedents (past experience and past expertise) from the trustworthy cue of project descriptions. We then investigate their impacts on funding success. Using data collected from Kickstarter, a popular crowdfunding platform, we find that these antecedents are significantly associated with funding success. Empirical results show that the proposed model that incorporated these antecedents can achieve an accuracy of 73 % (70 % in F-measure). The result represents an improvement of roughly 14 percentage points over the baseline model based on informed guessing and 4 percentage points improvement over the mainstream model based on basic project properties (or 44 % improvement of mainstream's performance over informed guessing). The proposed model also has superior true positive and true negative rates. We also investigate the timeliness of project data and find that old project data is gradually becoming less relevant and losing predictive power to newly created projects. Overall, this study provides evidence that antecedents identified from project descriptions have incremental predictive power and can help project owners evaluate and improve the likelihood of funding success.

Descriptive Analysis in Education: A Guide for Researchers. NCEE 2017-4023

ERIC Educational Resources Information Center

Loeb, Susanna; Dynarski, Susan; McFarland, Daniel; Morris, Pamela; Reardon, Sean; Reber, Sarah

2017-01-01

Whether the goal is to identify and describe trends and variation in populations, create new measures of key phenomena, or describe samples in studies aimed at identifying causal effects, description plays a critical role in the scientific process in general and education research in particular. Descriptive analysis identifies patterns in data to…

Materials Processing in Space (MPS) program description

NASA Technical Reports Server (NTRS)

1981-01-01

Insight is provided into the scientific rotationale for materials processing in space (MPS), and a comprehensive and cohesive approach for implementation and integration of the many, diverse aspects of MPS is described. The programmatic and management functions apply to all projects and activities implemented under MPS. It is intended that specific project plans, providing project unique details, will be appended to this document for endeavors such as the Space Processing Applications Rocket (SPAR) Project, the Materials Experiment Assembly (MEA) Project, the MPS/Spacelab (MPS/SL) Project, and the Materials Experiment Carrier (MEC) Payloads.

Morphometric differences of nasopalatine canal based on 3D classifications: descriptive analysis on CBCT.

PubMed

Fernández-Alonso, A; Suárez-Quintanilla, J A; Rapado-González, O; Suárez-Cunqueiro, María Mercedes

2015-09-01

This descriptive retrospective study analyzed differences among sagittal, coronal and axial NC groups based on the dimensions of nasopalatine canal (NC), buccal bone plate (BBP) and palatal bone plate (PBP) to canal. Measurements were made on 224 CBCTs for NC, BBP and PBP on the three anatomic planes at three levels: level 1, when the incisive foramen is completely closed on the axial plane; level 2, at the midpoint of NC length (NCL) on the sagittal plane; and level 3, at the foramina of Stenson on the sagittal plane. ANOVA tests with post hoc tests were used. The intraclass correlation coefficient and Kappa test were used for evaluating the intraobserver agreement. Regarding coronal classification, these significant differences were found: BBP length (BL)level 1 was lower for the two parallel canals group; PBP length (PL)level 1 was lower for single canal group; and NCL was lower for Y-type canal group. Regarding axial classification, these significant differences were found: LPlevel 1 was lower for 3.1-3 group; PBP width (PW)level 3 was the greatest for 3.1-3; and LPlevel 3 was lower for 1.1. Presurgical evaluation with CBCT in premaxillae region should include analysis on coronal and axial planes and not only on sagittal plane seeing as morphometric differences were found on coronal and axial planes. Following the morphological coronal classification, two parallel canals presented a higher NCL, a higher LP and a lower LV at inferior edge of alveolar ridge.

40 CFR 429.90 - Applicability; description of the wood preserving-Boulton subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Applicability; description of the wood... CATEGORY Wood Preserving-Boulton Subcategory § 429.90 Applicability; description of the wood preserving... introduction of process wastewater pollutants into a publicly owned treatment works from wood preserving...

40 CFR 429.90 - Applicability; description of the wood preserving-Boulton subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Applicability; description of the wood... CATEGORY Wood Preserving-Boulton Subcategory § 429.90 Applicability; description of the wood preserving... introduction of process wastewater pollutants into a publicly owned treatment works from wood preserving...

40 CFR 429.90 - Applicability; description of the wood preserving-Boulton subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Applicability; description of the wood... CATEGORY Wood Preserving-Boulton Subcategory § 429.90 Applicability; description of the wood preserving... introduction of process wastewater pollutants into a publicly owned treatment works from wood preserving...

40 CFR 429.90 - Applicability; description of the wood preserving-Boulton subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Applicability; description of the wood... Wood Preserving-Boulton Subcategory § 429.90 Applicability; description of the wood preserving—Boulton... process wastewater pollutants into a publicly owned treatment works from wood preserving operations which...

40 CFR 429.90 - Applicability; description of the wood preserving-Boulton subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 30 2011-07-01 2011-07-01 false Applicability; description of the wood... Wood Preserving-Boulton Subcategory § 429.90 Applicability; description of the wood preserving—Boulton... process wastewater pollutants into a publicly owned treatment works from wood preserving operations which...

Interacting potential between spinons in the compact QED3 description of the Heisenberg model

NASA Astrophysics Data System (ADS)

Dillenschneider, R.; Richert, J.

2008-02-01

We implement a Chern-Simons (CS) contribution into the compact QED3 description of the antiferromagnetic Heisenberg model in two dimensions at zero temperature. The CS term allows for the conservation of the SU(2) symmetry of the quantum spin system and fixes the flux through a plaquette to be a multiple of π as was shown by Marston. We work out the string tension of the confining potential which acts between the spinons and show that the CS term induces a screening effect on the magnetic field only. The confining potential between spinons is not affected by the CS flux. The strict site-occupation by a single spin 1/2 is enforced by the introduction of an imaginary chemical potential constraint.

Advances in ultrasonic testing of austenitic stainless steel welds. Towards a 3D description of the material including attenuation and optimisation by inversion

NASA Astrophysics Data System (ADS)

Moysan, J.; Gueudré, C.; Ploix, M.-A.; Corneloup, G.; Guy, Ph.; Guerjouma, R. El; Chassignole, B.

In the case of multi-pass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Anisotropy results from the metal solidification and is correlated with the grain orientation. A precise description of the material is one of the key points to obtain reliable results with wave propagation codes. A first advance is the model MINA which predicts the grain orientations in multi-pass 316-L steel welds. For flat position welding, good predictions of the grains orientations were obtained using 2D modelling. In case of welding in position the resulting grain structure may be 3D oriented. We indicate how the MINA model can be improved for 3D description. A second advance is a good quantification of the attenuation. Precise measurements are obtained using plane waves angular spectrum method together with the computation of the transmission coefficients for triclinic material. With these two first advances, the third one is now possible: developing an inverse method to obtain the material description through ultrasonic measurements at different positions.

Hydrodynamic description of spin Calogero-Sutherland model

NASA Astrophysics Data System (ADS)

Abanov, Alexander; Kulkarni, Manas; Franchini, Fabio

2009-03-01

We study a non-linear collective field theory for an integrable spin-Calogero-Sutherland model. The hydrodynamic description of this SU(2) model in terms of charge density, charge velocity and spin currents is used to study non-perturbative solutions (solitons) and examine their correspondence with known quantum numbers of elementary excitations [1]. A conventional linear bosonization or harmonic approximation is not sufficient to describe, for example, the physics of spin-charge (non)separation. Therefore, we need this new collective bosonic field description that captures the effects of the band curvature. In the strong coupling limit [2] this model reduces to integrable SU(2) Haldane-Shastry model. We study a non-linear coupling of left and right spin currents which form a Kac-Moody algebra. Our quantum hydrodynamic description for the spin case is an extension for the one found in the spinless version in [3].[3pt] [1] Y. Kato,T. Yamamoto, and M. Arikawa, J. Phys. Soc. Jpn. 66, 1954-1961 (1997).[0pt] [2] A. Polychronakos, Phys Rev Lett. 70,2329-2331(1993).[0pt] [3] A.G.Abanov and P.B. Wiegmann, Phys Rev Lett 95, 076402(2005)

Using bio.tools to generate and annotate workbench tool descriptions

PubMed Central

Hillion, Kenzo-Hugo; Kuzmin, Ivan; Khodak, Anton; Rasche, Eric; Crusoe, Michael; Peterson, Hedi; Ison, Jon; Ménager, Hervé

2017-01-01

Workbench and workflow systems such as Galaxy, Taverna, Chipster, or Common Workflow Language (CWL)-based frameworks, facilitate the access to bioinformatics tools in a user-friendly, scalable and reproducible way. Still, the integration of tools in such environments remains a cumbersome, time consuming and error-prone process. A major consequence is the incomplete or outdated description of tools that are often missing important information, including parameters and metadata such as publication or links to documentation. ToolDog (Tool DescriptiOn Generator) facilitates the integration of tools - which have been registered in the ELIXIR tools registry (https://bio.tools) - into workbench environments by generating tool description templates. ToolDog includes two modules. The first module analyses the source code of the bioinformatics software with language-specific plugins, and generates a skeleton for a Galaxy XML or CWL tool description. The second module is dedicated to the enrichment of the generated tool description, using metadata provided by bio.tools. This last module can also be used on its own to complete or correct existing tool descriptions with missing metadata. PMID:29333231

40 CFR 415.280 - Applicability; description of the boric acid production subcategory.

Code of Federal Regulations, 2013 CFR

2013-07-01

... CATEGORY Boric Acid Production Subcategory § 415.280 Applicability; description of the boric acid... production of boric acid from ore-mined borax and from borax produced by the Trona process. ... 40 Protection of Environment 30 2013-07-01 2012-07-01 true Applicability; description of the boric...

40 CFR 415.280 - Applicability; description of the boric acid production subcategory.

Code of Federal Regulations, 2014 CFR

2014-07-01

... CATEGORY Boric Acid Production Subcategory § 415.280 Applicability; description of the boric acid... production of boric acid from ore-mined borax and from borax produced by the Trona process. ... 40 Protection of Environment 29 2014-07-01 2012-07-01 true Applicability; description of the boric...

40 CFR 415.280 - Applicability; description of the boric acid production subcategory.

Code of Federal Regulations, 2011 CFR

2011-07-01

... CATEGORY Boric Acid Production Subcategory § 415.280 Applicability; description of the boric acid... production of boric acid from ore-mined borax and from borax produced by the Trona process. ... 40 Protection of Environment 29 2011-07-01 2009-07-01 true Applicability; description of the boric...

40 CFR 415.280 - Applicability; description of the boric acid production subcategory.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CATEGORY Boric Acid Production Subcategory § 415.280 Applicability; description of the boric acid... production of boric acid from ore-mined borax and from borax produced by the Trona process. ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true Applicability; description of the boric...

14 CFR 161.9 - Designation of noise description methods.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 3 2011-01-01 2011-01-01 false Designation of noise description methods... TRANSPORTATION (CONTINUED) AIRPORTS NOTICE AND APPROVAL OF AIRPORT NOISE AND ACCESS RESTRICTIONS General Provisions § 161.9 Designation of noise description methods. For purposes of this part, the following...

14 CFR 161.9 - Designation of noise description methods.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Designation of noise description methods... TRANSPORTATION (CONTINUED) AIRPORTS NOTICE AND APPROVAL OF AIRPORT NOISE AND ACCESS RESTRICTIONS General Provisions § 161.9 Designation of noise description methods. For purposes of this part, the following...

Role of the 3He optical model potential ambiguity in the distorted-wave Born approximation description of the 58Ni(3He, d)59Cu reaction at 130 MeV incident energy

NASA Astrophysics Data System (ADS)

Djaloeis, A.; Alderliesten, C.; Bojowald, J.; Mayer-Böricke, C.; Oelert, W.; Turek, P.

1983-04-01

Angular distributions of 58Ni(3He, d)59Cu transitions leading to the (0.0 MeV, 32-), (0.91 MeV, 52-), and (3.04 MeV, 92+) states in 59Cu have been measured at an incident energy of 130 MeV. The experimental data have been used to study mainly the role of the 3He optical model potential ambiguity in the distorted-wave Born approximation description of the reaction. Satisfactory fits to the data are obtained using a deep helion potential in standard local zero-range calculations. For a shallow 3He potential a comparable description can be achieved if the depth of the real part of the deuteron optical potential is reduced considerably, and nonlocality as well as finite-range corrections are taken into account. Under these conditions, the use of a 3He potential constructed according to the Johnson-Soper prescription yields similar results. NUCLEAR REACTIONS 58Ni (3He, d)59Cu, E=130 MeV; measured dσ(θ)dΩ. Enriched target; DWBA analysis; discussed reaction mechanism.

40 CFR 407.20 - Applicability; description of the apple products subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... apple products subcategory. 407.20 Section 407.20 Protection of Environment ENVIRONMENTAL PROTECTION... PROCESSING POINT SOURCE CATEGORY Apple Products Subcategory § 407.20 Applicability; description of the apple... processing of apples into apple products. The processing of apples into caustic peeled or dehydrated products...

A description of a system of programs for mathematically processing on unified series (YeS) computers photographic images of the Earth taken from spacecraft

NASA Technical Reports Server (NTRS)

Zolotukhin, V. G.; Kolosov, B. I.; Usikov, D. A.; Borisenko, V. I.; Mosin, S. T.; Gorokhov, V. N.

1980-01-01

A description of a batch of programs for the YeS-1040 computer combined into an automated system for processing photo (and video) images of the Earth's surface, taken from spacecraft, is presented. Individual programs with the detailed discussion of the algorithmic and programmatic facilities needed by the user are presented. The basic principles for assembling the system, and the control programs are included. The exchange format within whose framework the cataloging of any programs recommended for the system of processing will be activated in the future is displayed.

Solar mesosphere explorer: Experiment description

NASA Technical Reports Server (NTRS)

1977-01-01

The Solar Mesosphere Explorer (SME) satellite experiments will provide a comprehensive study of atmospheric ozone and the processes which form and destroy it. Five instruments to be carried on the spacecraft will measure the ozone density and altitude distribution, monitor the incoming solar radiation, and measure other atmospheric constituents which affect ozone. The investigative approach concept, methods and procedures, preflight studies, and orbits and mission lifetime are presented. Descriptions of the instruments are also presented.

32 CFR 806.8 - Description of requested record.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 32 National Defense 6 2010-07-01 2010-07-01 false Description of requested record. 806.8 Section 806.8 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION... databases, word processing, and electronic mail files. ...

32 CFR 806.8 - Description of requested record.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 32 National Defense 6 2013-07-01 2013-07-01 false Description of requested record. 806.8 Section 806.8 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION... databases, word processing, and electronic mail files. ...

32 CFR 806.8 - Description of requested record.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 32 National Defense 6 2014-07-01 2014-07-01 false Description of requested record. 806.8 Section 806.8 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION... databases, word processing, and electronic mail files. ...

32 CFR 806.8 - Description of requested record.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 32 National Defense 6 2011-07-01 2011-07-01 false Description of requested record. 806.8 Section 806.8 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION... databases, word processing, and electronic mail files. ...

32 CFR 806.8 - Description of requested record.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 32 National Defense 6 2012-07-01 2012-07-01 false Description of requested record. 806.8 Section 806.8 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE ADMINISTRATION... databases, word processing, and electronic mail files. ...

Processing AIRS Scientific Data Through Level 3

NASA Technical Reports Server (NTRS)

Granger, Stephanie; Oliphant, Robert; Manning, Evan

2010-01-01

The Atmospheric Infra-Red Sounder (AIRS) Science Processing System (SPS) is a collection of computer programs, known as product generation executives (PGEs). The AIRS SPS PGEs are used for processing measurements received from the AIRS suite of infrared and microwave instruments orbiting the Earth onboard NASA's Aqua spacecraft. Early stages of the AIRS SPS development were described in a prior NASA Tech Briefs article: Initial Processing of Infrared Spectral Data (NPO-35243), Vol. 28, No. 11 (November 2004), page 39. In summary: Starting from Level 0 (representing raw AIRS data), the AIRS SPS PGEs and the data products they produce are identified by alphanumeric labels (1A, 1B, 2, and 3) representing successive stages or levels of processing. The previous NASA Tech Briefs article described processing through Level 2, the output of which comprises geo-located atmospheric data products such as temperature and humidity profiles among others. The AIRS Level 3 PGE samples selected information from the Level 2 standard products to produce a single global gridded product. One Level 3 product is generated for each day s collection of Level 2 data. In addition, daily Level 3 products are aggregated into two multiday products: an eight-day (half the orbital repeat cycle) product and monthly (calendar month) product.

Descriptions of Space Processing Applications Rocket (SPAR) experiments

NASA Technical Reports Server (NTRS)

Naumann, R. J. (Editor)

1979-01-01

The experiments for all the Space Processing Applications Rocket experiments, including those flown on previous Space Processing flights as well as those under development for future flights are described. The experiment objective, rationale, approach, and results or anticipated results are summarized.

16 CFR 1118.3 - Compulsory processes and service.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Compulsory processes and service. 1118.3... Investigations, Inspections, and Inquiries § 1118.3 Compulsory processes and service. (a) In addition to or in...) Depositions; and (4) General or special orders. (b) Service in connection with any of the compulsory processes...

Dual Sticky Hierarchical Dirichlet Process Hidden Markov Model and Its Application to Natural Language Description of Motions.

PubMed

Hu, Weiming; Tian, Guodong; Kang, Yongxin; Yuan, Chunfeng; Maybank, Stephen

2017-09-25

In this paper, a new nonparametric Bayesian model called the dual sticky hierarchical Dirichlet process hidden Markov model (HDP-HMM) is proposed for mining activities from a collection of time series data such as trajectories. All the time series data are clustered. Each cluster of time series data, corresponding to a motion pattern, is modeled by an HMM. Our model postulates a set of HMMs that share a common set of states (topics in an analogy with topic models for document processing), but have unique transition distributions. For the application to motion trajectory modeling, topics correspond to motion activities. The learnt topics are clustered into atomic activities which are assigned predicates. We propose a Bayesian inference method to decompose a given trajectory into a sequence of atomic activities. On combining the learnt sources and sinks, semantic motion regions, and the learnt sequence of atomic activities, the action represented by the trajectory can be described in natural language in as automatic a way as possible. The effectiveness of our dual sticky HDP-HMM is validated on several trajectory datasets. The effectiveness of the natural language descriptions for motions is demonstrated on the vehicle trajectories extracted from a traffic scene.

HYDROLOGIC EVALUATION OF LANDFILL PERFORMANCE (HELP) MODEL - USER'S GUIDE FOR VERSION 3

EPA Science Inventory

This report documents the solution methods and process descriptions used in the Version 3 of the HELP model. Program documentation including program options, system and operating requirements, file structures, program structure and variable descriptions are provided in a separat...

IDAPS (Image Data Automated Processing System) System Description

DTIC Science & Technology

1988-06-24

This document describes the physical configuration and components used in the image processing system referred to as IDAPS (Image Data Automated ... Processing System). This system was developed by the Environmental Research Institute of Michigan (ERIM) for Eglin Air Force Base. The system is designed

Product operator descriptions of INEPT and RINEPT NMR spectroscopies for ISn (I=1/2, S=3/2) spin systems.

PubMed

Tokatli, Ahmet; Gençten, Azmi; Sahin, Mükerrem; Tezel, Ozden; Bahçeli, Semiha

2004-07-01

The product operator descriptions of INEPT and reverse INEPT (RINEPT) NMR experiments are introduced for weakly coupled ISn (I=1/2, S=3/2 with n=1,2,3) spin systems. Explicit expressions for polarization transfer from spin-3/2 quadrupolar nuclei to spin-1/2 nuclei (and reversed polarization transfer) are given in detail by using the evolutions of product operators under the spin-spin coupling Hamiltonian. The results calculated for the intensities and positions of the observable signals are simulated in the molecules containing the 119Sn (I=1/2) and 35Cl (S=3/2) nuclei at the coupling constant of J(Sn-Cl)=375 Hz by using the Maple programme on computer.

Product operator descriptions of INEPT and RINEPT NMR spectroscopies for ISn ( I=1/2, S=3/2) spin systems

NASA Astrophysics Data System (ADS)

Tokatlı, Ahmet; Gençten, Azmi; Şahin, Mükerrem; Tezel, Özden; Bahçeli, Semiha

2004-07-01

The product operator descriptions of INEPT and reverse INEPT (RINEPT) NMR experiments are introduced for weakly coupled ISn ( I=1/2, S=3/2 with n=1,2,3) spin systems. Explicit expressions for polarization transfer from spin-3/2 quadrupolar nuclei to spin-1/2 nuclei (and reversed polarization transfer) are given in detail by using the evolutions of product operators under the spin-spin coupling Hamiltonian. The results calculated for the intensities and positions of the observable signals are simulated in the molecules containning the 119Sn ( I=1/2) and 35Cl ( S=3/2) nuclei at the coupling constant of JSn-Cl=375 Hz by using the Maple programme on computer.

40 CFR 415.270 - Applicability; description of the borax production subcategory.

Code of Federal Regulations, 2012 CFR

2012-07-01

... borax production subcategory. 415.270 Section 415.270 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Borax Production Subcategory § 415.270 Applicability; description of the borax production... borax by the ore-mining process and by the Trona process. ...

Biomass process handbook

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1983-01-01

Descriptions are given of 42 processes which use biomass to produce chemical products. Marketing and economic background, process description, flow sheets, costs, major equipment, and availability of technology are given for each of the 42 processes. Some of the chemicals discussed are: ethanol, ethylene, acetaldehyde, butanol, butadiene, acetone, citric acid, gluconates, itaconic acid, lactic acid, xanthan gum, sorbitol, starch polymers, fatty acids, fatty alcohols, glycerol, soap, azelaic acid, perlargonic acid, nylon-11, jojoba oil, furfural, furfural alcohol, tetrahydrofuran, cellulose polymers, products from pulping wastes, and methane. Processes include acid hydrolysis, enzymatic hydrolysis, fermentation, distillation, Purox process, and anaerobic digestion.

40 CFR 161.162 - Description of production process.

Code of Federal Regulations, 2010 CFR

2010-07-01

... applicant must submit information on the production (reaction) processes used to produce the active... continuous (a single reaction process from starting materials to active ingredient), but is accomplished in...) A flow chart of the chemical equations of each intended reaction occurring at each step of the...

40 CFR 161.162 - Description of production process.

Code of Federal Regulations, 2011 CFR

2011-07-01

... applicant must submit information on the production (reaction) processes used to produce the active... continuous (a single reaction process from starting materials to active ingredient), but is accomplished in...) A flow chart of the chemical equations of each intended reaction occurring at each step of the...

Beyond Gender Stereotypes in Language Comprehension: Self Sex-Role Descriptions Affect the Brain's Potentials Associated with Agreement Processing.

PubMed

Canal, Paolo; Garnham, Alan; Oakhill, Jane

2015-01-01

We recorded Event-Related Potentials to investigate differences in the use of gender information during the processing of reflexive pronouns. Pronouns either matched the gender provided by role nouns (such as "king" or "engineer") or did not. We compared two types of gender information, definitional information, which is semantic in nature (a mother is female), or stereotypical (a nurse is likely to be female). When they followed definitional role-nouns, gender-mismatching pronouns elicited a P600 effect reflecting a failure in the agreement process. When instead the gender violation occurred after stereotypical role-nouns the Event Related Potential response was biphasic, being positive in parietal electrodes and negative in anterior left electrodes. The use of a correlational approach showed that those participants with more "feminine" or "expressive" self sex-role descriptions showed a P600 response for stereotype violations, suggesting that they experienced the mismatch as an agreement violation; whereas less "expressive" participants showed an Nref effect, indicating more effort spent in linking the pronouns with the possible, although less likely, counter-stereotypical referent.

A Combinatorial Geometry Computer Description of the XR311 Vehicle

DTIC Science & Technology

1978-04-01

cards or magnetic tape. The shot line output of the GRID subroutine of the GIFT code is also stored on magnetic tape for future vulnera- bility...descriptions as processed by the Geometric Information For Targets ( GIFT )2 computer code. This report documents the COM-GEOM target description for all...72, March 1974. ’L.W. Bains and M.J. Reisinger, "The GIFT Code User Manual, VOL 1, Introduction and Input Requirements, " Ballistic Research

Strategies for human-driven robot comprehension of spatial descriptions by older adults in a robot fetch task.

PubMed

Carlson, Laura; Skubic, Marjorie; Miller, Jared; Huo, Zhiyu; Alexenko, Tatiana

2014-07-01

This contribution presents a corpus of spatial descriptions and describes the development of a human-driven spatial language robot system for their comprehension. The domain of application is an eldercare setting in which an assistive robot is asked to "fetch" an object for an elderly resident based on a natural language spatial description given by the resident. In Part One, we describe a corpus of naturally occurring descriptions elicited from a group of older adults within a virtual 3D home that simulates the eldercare setting. We contrast descriptions elicited when participants offered descriptions to a human versus robot avatar, and under instructions to tell the addressee how to find the target versus where the target is. We summarize the key features of the spatial descriptions, including their dynamic versus static nature and the perspective adopted by the speaker. In Part Two, we discuss critical cognitive and perceptual processing capabilities necessary for the robot to establish a common ground with the human user and perform the "fetch" task. Based on the collected corpus, we focus here on resolving the perspective ambiguity and recognizing furniture items used as landmarks in the descriptions. Taken together, the work presented here offers the key building blocks of a robust system that takes as input natural spatial language descriptions and produces commands that drive the robot to successfully fetch objects within our eldercare scenario. Copyright © 2014 Cognitive Science Society, Inc.

Delegation in Long-term Care: Scope of practice or job description?

PubMed

Corazzini, Kirsten N; Anderson, Ruth A; Rapp, Carla Gene; Mueller, Christine; McConnell, Eleanor S; Lekan, Deborah

2010-05-31

This study is a qualitative, descriptive study of how registered nurses (RNs) (N=33) in leadership roles in institutionalized long-term care settings delegate care, including their strategies and processes for delegating care, and their perceptions of barriers to effective delegation and potential benefits of delegation. Findings indicate two key approaches to delegation, including the "follow the job description" approach, emphasizing adherence to facility-level roles and job descriptions, and the "consider the scope of practice" approach, emphasizing consideration of multiple aspects of scope of practice and licensure, and the context of care. While the former resulted in more clarity and certainty for the RN, the latter facilitated a focus on quality of resident care outcomes as linked to the delegation process. Barriers to effective delegation were comparable among RNs using either approach to delegation, and almost all RNs could describe benefits of delegation for long-term care.

Low cost 3D scanning process using digital image processing

NASA Astrophysics Data System (ADS)

Aguilar, David; Romero, Carlos; Martínez, Fernando

2017-02-01

This paper shows the design and building of a low cost 3D scanner, able to digitize solid objects through contactless data acquisition, using active object reflection. 3D scanners are used in different applications such as: science, engineering, entertainment, etc; these are classified in: contact scanners and contactless ones, where the last ones are often the most used but they are expensive. This low-cost prototype is done through a vertical scanning of the object using a fixed camera and a mobile horizontal laser light, which is deformed depending on the 3-dimensional surface of the solid. Using digital image processing an analysis of the deformation detected by the camera was done; it allows determining the 3D coordinates using triangulation. The obtained information is processed by a Matlab script, which gives to the user a point cloud corresponding to each horizontal scanning done. The obtained results show an acceptable quality and significant details of digitalized objects, making this prototype (built on LEGO Mindstorms NXT kit) a versatile and cheap tool, which can be used for many applications, mainly by engineering students.

Assessment Methodology for Process Validation Lifecycle Stage 3A.

PubMed

Sayeed-Desta, Naheed; Pazhayattil, Ajay Babu; Collins, Jordan; Chen, Shu; Ingram, Marzena; Spes, Jana

2017-07-01

The paper introduces evaluation methodologies and associated statistical approaches for process validation lifecycle Stage 3A. The assessment tools proposed can be applied to newly developed and launched small molecule as well as bio-pharma products, where substantial process and product knowledge has been gathered. The following elements may be included in Stage 3A: number of 3A batch determination; evaluation of critical material attributes, critical process parameters, critical quality attributes; in vivo in vitro correlation; estimation of inherent process variability (IPV) and PaCS index; process capability and quality dashboard (PCQd); and enhanced control strategy. US FDA guidance on Process Validation: General Principles and Practices, January 2011 encourages applying previous credible experience with suitably similar products and processes. A complete Stage 3A evaluation is a valuable resource for product development and future risk mitigation of similar products and processes. Elements of 3A assessment were developed to address industry and regulatory guidance requirements. The conclusions made provide sufficient information to make a scientific and risk-based decision on product robustness.

3D image processing architecture for camera phones

NASA Astrophysics Data System (ADS)

Atanassov, Kalin; Ramachandra, Vikas; Goma, Sergio R.; Aleksic, Milivoje

2011-03-01

Putting high quality and easy-to-use 3D technology into the hands of regular consumers has become a recent challenge as interest in 3D technology has grown. Making 3D technology appealing to the average user requires that it be made fully automatic and foolproof. Designing a fully automatic 3D capture and display system requires: 1) identifying critical 3D technology issues like camera positioning, disparity control rationale, and screen geometry dependency, 2) designing methodology to automatically control them. Implementing 3D capture functionality on phone cameras necessitates designing algorithms to fit within the processing capabilities of the device. Various constraints like sensor position tolerances, sensor 3A tolerances, post-processing, 3D video resolution and frame rate should be carefully considered for their influence on 3D experience. Issues with migrating functions such as zoom and pan from the 2D usage model (both during capture and display) to 3D needs to be resolved to insure the highest level of user experience. It is also very important that the 3D usage scenario (including interactions between the user and the capture/display device) is carefully considered. Finally, both the processing power of the device and the practicality of the scheme needs to be taken into account while designing the calibration and processing methodology.

1 CFR 20.4 - Description of program activities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Description of program activities. 20.4 Section 20.4 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER PREPARATION, TRANSMITTAL, AND PROCESSING OF DOCUMENTS HANDLING OF THE UNITED STATES GOVERNMENT MANUAL STATEMENTS § 20.4...

45 CFR 1311.3 - Application process.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 4 2013-10-01 2013-10-01 false Application process. 1311.3 Section 1311.3 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START...

45 CFR 1311.3 - Application process.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 45 Public Welfare 4 2012-10-01 2012-10-01 false Application process. 1311.3 Section 1311.3 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START...

45 CFR 1311.3 - Application process.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 4 2014-10-01 2014-10-01 false Application process. 1311.3 Section 1311.3 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START...

45 CFR 1311.3 - Application process.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Application process. 1311.3 Section 1311.3 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START...

45 CFR 1311.3 - Application process.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 45 Public Welfare 4 2011-10-01 2011-10-01 false Application process. 1311.3 Section 1311.3 Public Welfare Regulations Relating to Public Welfare (Continued) OFFICE OF HUMAN DEVELOPMENT SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION FOR CHILDREN, YOUTH AND FAMILIES, HEAD START...

Hardware description languages

NASA Technical Reports Server (NTRS)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

15 CFR 15.3 - Acceptance of service of process.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Acceptance of service of process. 15.3... Process § 15.3 Acceptance of service of process. (a) Except as otherwise provided in this subpart, any... employee by law is to be served personally with process. Service of process in this case is inadequate when...

A preliminary regional PBPK model of lung metabolism for improving species dependent descriptions of 1,3-butadiene and its metabolites.

PubMed

Campbell, Jerry; Van Landingham, Cynthia; Crowell, Susan; Gentry, Robinan; Kaden, Debra; Fiebelkorn, Stacy; Loccisano, Anne; Clewell, Harvey

2015-08-05

1,3-Butadiene (BD), a volatile organic chemical (VOC), is used in synthetic rubber production and other industrial processes. It is detectable at low levels in ambient air as well as in tobacco smoke and gasoline vapors. Inhalation exposures to high concentrations of BD have been associated with lung cancer in both humans and experimental animals, although differences in species sensitivity have been observed. Metabolically active lung cells such as Pulmonary Type I and Type II epithelial cells and club cells (Clara cells)(1) are potential targets of BD metabolite-induced toxicity. Metabolic capacities of these cells, their regional densities, and distributions vary throughout the respiratory tract as well as between species and cell types. Here we present a physiologically based pharmacokinetic (PBPK) model for BD that includes a regional model of lung metabolism, based on a previous model for styrene, to provide species-dependent descriptions of BD metabolism in the mouse, rat, and human. Since there are no in vivo data on BD pharmacokinetics in the human, the rat and mouse models were parameterized to the extent possible on the basis of in vitro metabolic data. Where it was necessary to use in vivo data, extrapolation from rat to mouse was performed to evaluate the level of uncertainty in the human model. A kidney compartment and description of downstream metabolism were also included in the model to allow for eventual use of available urinary and blood biomarker data in animals and humans to calibrate the model for estimation of BD exposures and internal metabolite levels. Results from simulated inhalation exposures to BD indicate that incorporation of differential lung region metabolism is important in describing species differences in pulmonary response and that these differences may have implications for risk assessments of human exposures to BD. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

A preliminary regional PBPK model of lung metabolism for improving species dependent descriptions of 1,3-butadiene and its metabolites

DOE PAGES

Campbell, Jerry; Van Landingham, Cynthia; Crowell, Susan; ...

2015-06-12

1,3-Butadiene (BD), a volatile organic chemical (VOC), is used in synthetic rubber production and other industrial processes. It is detectable at low levels in ambient air as well as in tobacco smoke and gasoline vapors. Inhalation exposures to high concentrations of BD have been associated with lung cancer in both humans and experimental animals, although differences in species sensitivity have been observed. Metabolically active lung cells such as Pulmonary Type I and Type II epithelial cells and club cells (Clara cells) 1 are potential targets of BD metabolite-induced toxicity. Metabolic capacities of these cells, their regional densities, and distributions varymore » throughout the respiratory tract as well as between species and cell types. Here we present a physiologically based pharmacokinetic (PBPK) model for BD that includes a regional model of lung metabolism, based on a previous model for styrene, to provide species-dependent descriptions of BD metabolism in the mouse, rat, and human. Since there are no in vivo data on BD pharmacokinetics in the human, the rat and mouse models were parameterized to the extent possible on the basis of in vitro metabolic data. Where it was necessary to use in vivo data, extrapolation from rat to mouse was performed to evaluate the level of uncertainty in the human model. A kidney compartment and description of downstream metabolism were also included in the model to allow for eventual use of available urinary and blood biomarker data in animals and humans to calibrate the model for estimation of BD exposures and internal metabolite levels. Results from simulated inhalation exposures to BD indicate that incorporation of differential lung region metabolism is important in describing species differences in pulmonary response and that these differences may have implications for risk assessments of human exposures to BD.« less

A preliminary regional PBPK model of lung metabolism for improving species dependent descriptions of 1,3-butadiene and its metabolites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Campbell, Jerry; Van Landingham, Cynthia; Crowell, Susan

1,3-Butadiene (BD), a volatile organic chemical (VOC), is used in synthetic rubber production and other industrial processes. It is detectable at low levels in ambient air as well as in tobacco smoke and gasoline vapors. Inhalation exposures to high concentrations of BD have been associated with lung cancer in both humans and experimental animals, although differences in species sensitivity have been observed. Metabolically active lung cells such as Pulmonary Type I and Type II epithelial cells and club cells (Clara cells) 1 are potential targets of BD metabolite-induced toxicity. Metabolic capacities of these cells, their regional densities, and distributions varymore » throughout the respiratory tract as well as between species and cell types. Here we present a physiologically based pharmacokinetic (PBPK) model for BD that includes a regional model of lung metabolism, based on a previous model for styrene, to provide species-dependent descriptions of BD metabolism in the mouse, rat, and human. Since there are no in vivo data on BD pharmacokinetics in the human, the rat and mouse models were parameterized to the extent possible on the basis of in vitro metabolic data. Where it was necessary to use in vivo data, extrapolation from rat to mouse was performed to evaluate the level of uncertainty in the human model. A kidney compartment and description of downstream metabolism were also included in the model to allow for eventual use of available urinary and blood biomarker data in animals and humans to calibrate the model for estimation of BD exposures and internal metabolite levels. Results from simulated inhalation exposures to BD indicate that incorporation of differential lung region metabolism is important in describing species differences in pulmonary response and that these differences may have implications for risk assessments of human exposures to BD.« less

Description of the insulation system for the Langley 0.3-Meter Transonic Cryogenic Tunnel

NASA Technical Reports Server (NTRS)

Lawing, P. L.; Dress, D. A.; Kilgore, R. A.

1985-01-01

The thermal insulation system of the Langley 0.3 Meter Transonic Cryogenic Tunnel is described. The insulation system is designed to operate from room temperature down to about 77.4 K, the temperature of liquid nitrogen at 1 atmosphere. A detailed description is given of the primary insulation sytem consists of glass fiber mats, a three part vapor barrier, and a dry positive pressure purge system. Also described are several secondary insulation systems required for the test section, actuators, and tunnel supports. An appendix briefly describes the original insulation system which is considered inferior to the one presently in place. The time required for opening and closing portions of the insulation system for modification or repair to the tunnel has been reduced, typically, from a few days for the original thermal insulating system to a few hours for the present system.

Description of the containerless melting of glass in low gravity

NASA Technical Reports Server (NTRS)

Ray, C. S.; Day, D. E.

1983-01-01

A brief description is given of a single-axis, acoustic levitator/furnace apparatus used to position, heat, melt, and quench multicomponent oxide, glass-forming compositions in low gravity. This apparatus is capable of processing eight approximately spherical samples (about 6 mm diameter) at temperatures up to 1550 C in a dry air atmosphere. Results are also presented for a containerless melting experiment conducted on SPAR VI where a ternary CaO-Ga2O3-SiO2 composition was levitated and quenched to a glass. Selected properties of the glass prepared on SPAR VI are compared with the properties of glass samples of identical composition prepared on earth.

The Patient Experience With Shared Decision Making: A Qualitative Descriptive Study.

PubMed

Truglio-Londrigan, Marie

2015-01-01

Shared decision making is a process characterized by a partnership between a nurse and a patient. The existence of a relationship does not ensure shared decision making. Little is known about what nurses need to know and do for this experience to take place. A qualitative descriptive study was implemented using Coalizzi's method. Semistructured interviews were held with patients, and 3 themes were uncovered. The findings suggest that a nurse's conduct aimed at drawing patients in and inviting them to participate in a conversation leads toward shared decisions. Infusion nurses may find this information useful as they engage their patients in shared decisions.

Composing Models of Geographic Physical Processes

NASA Astrophysics Data System (ADS)

Hofer, Barbara; Frank, Andrew U.

Processes are central for geographic information science; yet geographic information systems (GIS) lack capabilities to represent process related information. A prerequisite to including processes in GIS software is a general method to describe geographic processes independently of application disciplines. This paper presents such a method, namely a process description language. The vocabulary of the process description language is derived formally from mathematical models. Physical processes in geography can be described in two equivalent languages: partial differential equations or partial difference equations, where the latter can be shown graphically and used as a method for application specialists to enter their process models. The vocabulary of the process description language comprises components for describing the general behavior of prototypical geographic physical processes. These process components can be composed by basic models of geographic physical processes, which is shown by means of an example.

Descriptive Feedback: Student Voice in K-5 Classrooms

ERIC Educational Resources Information Center

Rodgers, Carol

2018-01-01

In this article, the author argues the imperative of critical dialogue between learners and teachers on learners' experiences in the classroom. This dialogical process is called "descriptive feedback"--feedback given by students to teachers on their (students') experiences as learners. Drawing on the literature on feedback, descriptive…

Numeric promoter description - A comparative view on concepts and general application.

PubMed

Beier, Rico; Labudde, Dirk

2016-01-01

Nucleic acid molecules play a key role in a variety of biological processes. Starting from storage and transfer tasks, this also comprises the triggering of biological processes, regulatory effects and the active influence gained by target binding. Based on the experimental output (in this case promoter sequences), further in silico analyses aid in gaining new insights into these processes and interactions. The numerical description of nucleic acids thereby constitutes a bridge between the concrete biological issues and the analytical methods. Hence, this study compares 26 descriptor sets obtained by applying well-known numerical description concepts to an established dataset of 38 DNA promoter sequences. The suitability of the description sets was evaluated by computing partial least squares regression models and assessing the model accuracy. We conclude that the major importance regarding the descriptive power is attached to positional information rather than to explicitly incorporated physico-chemical information, since a sufficient amount of implicit physico-chemical information is already encoded in the nucleobase classification. The regression models especially benefited from employing the information that is encoded in the sequential and structural neighborhood of the nucleobases. Thus, the analyses of n-grams (short fragments of length n) suggested that they are valuable descriptors for DNA target interactions. A mixed n-gram descriptor set thereby yielded the best description of the promoter sequences. The corresponding regression model was checked and found to be plausible as it was able to reproduce the characteristic binding motifs of promoter sequences in a reasonable degree. As most functional nucleic acids are based on the principle of molecular recognition, the findings are not restricted to promoter sequences, but can rather be transferred to other kinds of functional nucleic acids. Thus, the concepts presented in this study could provide

Photodissociation of the CH3O and CH3S radical molecules: An ab initio electronic structure study

PubMed Central

Bouallagui, A.; Zanchet, A.; Yazidi, O.; Jaïdane, N.; Bañares, L.; Senent, M.L.; García-Vela, A.

2018-01-01

The electronic states and the spin-orbit couplings between them involved in the photodissociation process of the radical molecules CH3X, CH3X → CH3 + X(X = O, S), taking place after the Ā(2A1) ← X̄(2E) transition, have been investigated using highly correlated ab initio techniques. A two-dimensional representation of both the potential-energy surfaces (PESs) and the couplings is generated. This description includes the C-X dissociative mode and the CH3 umbrella mode. Spin-orbit effects are found to play a relevant role on the shape of the excited state potential-energy surfaces, particularly in the CH3S case where the spin-orbit couplings are more than twice more intense than in CH3O. The potential surfaces and couplings reported here for the present set of electronic states allow for the first complete description of the above photodissociation process. The different photodissociation mechanisms are analyzed and discussed in the light of the results obtained. PMID:29143005

Global Deployment Anaylsis System Algorithm Description (With Updates)

DTIC Science & Technology

1998-09-01

Global Deployment Analysis System Algorithm Description (with Updates) By Noetics , Inc. For U.S. Army Concepts Analysis Agency Contract...t "O -Q £5.3 Q 20000224 107 aQU’no-bi-o^f r This Algorithm Description for the Global Deployment Analysis System (GDAS) was prepared by Noetics ...support for Paradox Runtime will be provided by the GDAS developers, CAA and Noetics Inc., and not by Borland International. GDAS for Windows has

A Combinatorial Geometry Computer Description of the M9 ACE (Armored Combat Earthmover) Vehicle

DTIC Science & Technology

1984-12-01

program requires as input the M9 target descriptions as processed by the Geometric Information for Targets ( GIFT ) ’ computer code. The first step is...model of the target. This COM-GEOM target description is used as input to the Geometric Information For Targets ( GIFT ) computer code. Among other...things, the GIFT code traces shotlines through a COM-GEOM description from any specified aspect, listing pertinent information about each component hit

Understanding sustainable diets: a descriptive analysis of the determinants and processes that influence diets and their impact on health, food security, and environmental sustainability.

PubMed

Johnston, Jessica L; Fanzo, Jessica C; Cogill, Bruce

2014-07-01

The confluence of population, economic development, and environmental pressures resulting from increased globalization and industrialization reveal an increasingly resource-constrained world in which predictions point to the need to do more with less and in a "better" way. The concept of sustainable diets presents an opportunity to successfully advance commitments to sustainable development and the elimination of poverty, food and nutrition insecurity, and poor health outcomes. This study examines the determinants of sustainable diets, offers a descriptive analysis of these areas, and presents a causal model and framework from which to build. The major determinants of sustainable diets fall into 5 categories: 1) agriculture, 2) health, 3) sociocultural, 4) environmental, and 5) socioeconomic. When factors or processes are changed in 1 determinant category, such changes affect other determinant categories and, in turn, the level of "sustainability" of a diet. The complex web of determinants of sustainable diets makes it challenging for policymakers to understand the benefits and considerations for promoting, processing, and consuming such diets. To advance this work, better measurements and indicators must be developed to assess the impact of the various determinants on the sustainability of a diet and the tradeoffs associated with any recommendations aimed at increasing the sustainability of our food system. © 2014 American Society for Nutrition.

Catalog Descriptions Using VOTable Files

NASA Astrophysics Data System (ADS)

Thompson, R.; Levay, K.; Kimball, T.; White, R.

2008-08-01

Additional information is frequently required to describe database table contents and make it understandable to users. For this reason, the Multimission Archive at Space Telescope (MAST) creates Òdescription filesÓ for each table/catalog. After trying various XML and CSV formats, we finally chose VOTable. These files are easy to update via an HTML form, easily read using an XML parser such as (in our case) the PHP5 SimpleXML extension, and have found multiple uses in our data access/retrieval process.

A Guide for Developing Standard Operating Job Procedures for the Pump Station Process Wastewater Treatment Facility. SOJP No. 3.

ERIC Educational Resources Information Center

Perley, Gordon F.

This is a guide for standard operating job procedures for the pump station process of wastewater treatment plants. Step-by-step instructions are given for pre-start up inspection, start-up procedures, continuous routine operation procedures, and shut-down procedures. A general description of the equipment used in the process is given. Two…

Descriptive statistics.

PubMed

Nick, Todd G

2007-01-01

Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

The X3LYP extended density functional for accurate descriptions of nonbond interactions, spin states, and thermochemical properties

PubMed Central

Xu, Xin; Goddard, William A.

2004-01-01

We derive the form for an exact exchange energy density for a density decaying with Gaussian-like behavior at long range. Based on this, we develop the X3LYP (extended hybrid functional combined with Lee–Yang–Parr correlation functional) extended functional for density functional theory to significantly improve the accuracy for hydrogen-bonded and van der Waals complexes while also improving the accuracy in heats of formation, ionization potentials, electron affinities, and total atomic energies [over the most popular and accurate method, B3LYP (Becke three-parameter hybrid functional combined with Lee–Yang–Parr correlation functional)]. X3LYP also leads to a good description of dipole moments, polarizabilities, and accurate excitation energies from s to d orbitals for transition metal atoms and ions. We suggest that X3LYP will be useful for predicting ligand binding in proteins and DNA. PMID:14981235

Beyond Gender Stereotypes in Language Comprehension: Self Sex-Role Descriptions Affect the Brain’s Potentials Associated with Agreement Processing

PubMed Central

Canal, Paolo; Garnham, Alan; Oakhill, Jane

2015-01-01

We recorded Event-Related Potentials to investigate differences in the use of gender information during the processing of reflexive pronouns. Pronouns either matched the gender provided by role nouns (such as “king” or “engineer”) or did not. We compared two types of gender information, definitional information, which is semantic in nature (a mother is female), or stereotypical (a nurse is likely to be female). When they followed definitional role-nouns, gender-mismatching pronouns elicited a P600 effect reflecting a failure in the agreement process. When instead the gender violation occurred after stereotypical role-nouns the Event Related Potential response was biphasic, being positive in parietal electrodes and negative in anterior left electrodes. The use of a correlational approach showed that those participants with more “feminine” or “expressive” self sex-role descriptions showed a P600 response for stereotype violations, suggesting that they experienced the mismatch as an agreement violation; whereas less “expressive” participants showed an Nref effect, indicating more effort spent in linking the pronouns with the possible, although less likely, counter-stereotypical referent. PMID:26779046

Laser processing of polymer constructs from poly(3-hydroxybutyrate).

PubMed

Volova, T G; Tarasevich, A A; Golubev, A I; Boyandin, A N; Shumilova, A A; Nikolaeva, E D; Shishatskaya, E I

2015-01-01

CO2 laser radiation was used to process poly(3-hydroxybutyrate) constructs - films and 3D pressed plates. Laser processing increased the biocompatibility of unperforated films treated with moderate uniform radiation, as estimated by the number and degree of adhesion of NIH 3T3 mouse fibroblast cells. The biocompatibility of perforated films modified in the pulsed mode did not change significantly. At the same time, pulsed laser processing of the 3D plates produced perforated scaffolds with improved mechanical properties and high biocompatibility with bone marrow-derived multipotent, mesenchymal stem cells, which show great promise for bone regeneration.

36 CFR 1120.26 - Deficient descriptions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 36 Parks, Forests, and Public Property 3 2012-07-01 2012-07-01 false Deficient descriptions. 1120.26 Section 1120.26 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... additional information is furnished. (b) The A&TBCB must make every reasonable effort to assist the requestor...

36 CFR 1120.26 - Deficient descriptions.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 36 Parks, Forests, and Public Property 3 2011-07-01 2011-07-01 false Deficient descriptions. 1120.26 Section 1120.26 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... additional information is furnished. (b) The A&TBCB must make every reasonable effort to assist the requestor...

36 CFR 1120.26 - Deficient descriptions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 36 Parks, Forests, and Public Property 3 2014-07-01 2014-07-01 false Deficient descriptions. 1120.26 Section 1120.26 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... additional information is furnished. (b) The A&TBCB must make every reasonable effort to assist the requestor...

36 CFR 1120.26 - Deficient descriptions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Deficient descriptions. 1120.26 Section 1120.26 Parks, Forests, and Public Property ARCHITECTURAL AND TRANSPORTATION BARRIERS... additional information is furnished. (b) The A&TBCB must make every reasonable effort to assist the requestor...

Seeing beyond monitors-Critical care nurses' multiple skills in patient observation: Descriptive qualitative study.

PubMed

Alastalo, Mika; Salminen, Leena; Lakanmaa, Riitta-Liisa; Leino-Kilpi, Helena

2017-10-01

The aim of this study was to provide a comprehensive description of multiple skills in patient observation in critical care nursing. Data from semi-structured interviews were analysed using thematic analysis. Experienced critical care nurses (n=20) from three intensive care units in two university hospitals in Finland. Patient observation skills consist of: information gaining skills, information processing skills, decision-making skills and co-operation skills. The first three skills are integrated in the patient observation process, in which gaining information is a prerequisite for processing information that precedes making decisions. Co-operation has a special role as it occurs throughout the process. This study provided a comprehensive description of patient observation skills related to the three-phased patient observation process. The findings contribute to clarifying this part of the competence. The description of patient observation skills may be applied in both clinical practice and education as it may serve as a framework for orientation, ensuring clinical skills and designing learning environments. Based on this study, patient observation skills can be recommended to be included in critical care nursing education, orientation and as a part of critical care nurses' competence evaluation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Digital ultrasonics signal processing: Flaw data post processing use and description

NASA Technical Reports Server (NTRS)

Buel, V. E.

1981-01-01

A modular system composed of two sets of tasks which interprets the flaw data and allows compensation of the data due to transducer characteristics is described. The hardware configuration consists of two main units. A DEC LSI-11 processor running under the RT-11 sngle job, version 2C-02 operating system, controls the scanner hardware and the ultrasonic unit. A DEC PDP-11/45 processor also running under the RT-11, version 2C-02, operating system, stores, processes and displays the flaw data. The software developed the Ultrasonics Evaluation System, is divided into two catagories; transducer characterization and flaw classification. Each category is divided further into two functional tasks: a data acquisition and a postprocessor ask. The flaw characterization collects data, compresses its, and writes it to a disk file. The data is then processed by the flaw classification postprocessing task. The use and operation of a flaw data postprocessor is described.

Towards an ontological representation of morbidity and mortality in Description Logics.

PubMed

Santana, Filipe; Freitas, Fred; Fernandes, Roberta; Medeiros, Zulma; Schober, Daniel

2012-09-21

Despite the high coverage of biomedical ontologies, very few sound definitions of death can be found. Nevertheless, this concept has its relevance in epidemiology, such as for data integration within mortality notification systems. We here introduce an ontological representation of the complex biological qualities and processes that inhere in organisms transitioning from life to death. We further characterize them by causal processes and their temporal borders. Several representational difficulties were faced, mainly regarding kinds of processes with blurred or fiat borders that change their type in a continuous rather than discrete mode. Examples of such hard to grasp concepts are life, death and its relationships with injuries and diseases. We illustrate an iterative optimization of definitions within four versions of the ontology, so as to stress the typical problems encountered in representing complex biological processes. We point out possible solutions for representing concepts related to biological life cycles, preserving identity of participating individuals, i.e. for a patient in transition from life to death. This solution however required the use of extended description logics not yet supported by tools. We also focus on the interdependencies and need to change further parts if one part is changed. The axiomatic definition of mortality we introduce allows the description of biologic processes related to the transition from healthy to diseased or injured, and up to a final death state. Exploiting such definitions embedded into descriptions of pathogen transmissions by arthropod vectors, the complete sequence of infection and disease processes can be described, starting from the inoculation of a pathogen by a vector, until the death of an individual, preserving the identity of the patient.

Music-listening habits with MP3 player in a group of adolescents: a descriptive survey.

PubMed

Pellegrino, E; Lorini, C; Allodi, G; Buonamici, C; Garofalo, G; Bonaccorsi, G

2013-01-01

Listening to music through portable MP3 players has become a very popular mode among young people and adolescents. The aim of this study is to investigate the behaviors of adolescents engaged in listening to music with MP3 player and the attendance at clubs (pubs, discotheques) where music is played at high volume. Among the 1470 students attending a secondary school in Scandicci (FI) during the school year 2009/2010, 1278 (86.9%) were at school the day of the examination and 1276 completely filled in the questionnaire. Descriptive analysis and univariate and multivariate logistic regression were performed to calculate the degree of association (OR) among the sociodemographic characteristics, listening habits and some factors identified as risky or protective as regards the possibility of developing health disorders. MP3 player users are 88.2% of the sample. Among these, a high proportion engaged behaviours that increase the risk of presenting disorders, including the exposure to high-volume (27.4%). Furthermore, 44.6% use the MP3 while driving. From the regression analysis it emerges that MP3 users showed a sort of addiction: by increasing the time and the occasions of exposure to music, they increased the volume, used maximum or medium-high volume, did not take breaks and did not decrease the volume. The study points out the spread of risky behavior in music listening, so it is necessary to better inform especially the youngsters and achieve specific preventive interventions.

Dynamic Monte Carlo description of thermal desorption processes

NASA Astrophysics Data System (ADS)

Weinketz, Sieghard

1994-07-01

The applicability of the dynamic Monte Carlo method of Fichthorn and Weinberg, in which the time evolution of a system is described in terms of the absolute number of different microscopic possible events and their associated transition rates, is discussed for the case of thermal desorption simulations. It is shown that the definition of the time increment at each successful event leads naturally to the macroscopic differential equation of desorption, in the case of simple first- and second-order processes in which the only possible events are desorption and diffusion. This equivalence is numerically demonstrated for a second-order case. In the sequence, the equivalence of this method with the Monte Carlo method of Sales and Zgrablich for more complex desorption processes, allowing for lateral interactions between adsorbates, is shown, even though the dynamic Monte Carlo method does not bear their limitation of a rapid surface diffusion condition, thus being able to describe a more complex ``kinetics'' of surface reactive processes, and therefore be applied to a wider class of phenomena, such as surface catalysis.

Analytic and heuristic processing influences on adolescent reasoning and decision-making.

PubMed

Klaczynski, P A

2001-01-01

The normative/descriptive gap is the discrepancy between actual reasoning and traditional standards for reasoning. The relationship between age and the normative/descriptive gap was examined by presenting adolescents with a battery of reasoning and decision-making tasks. Middle adolescents (N = 76) performed closer to normative ideals than early adolescents (N = 66), although the normative/descriptive gap was large for both groups. Correlational analyses revealed that (1) normative responses correlated positively with each other, (2) nonnormative responses were positively interrelated, and (3) normative and nonnormative responses were largely independent. Factor analyses suggested that performance was based on two processing systems. The "analytic" system operates on "decontextualized" task representations and underlies conscious, computational reasoning. The "heuristic" system operates on "contextualized," content-laden representations and produces "cognitively cheap" responses that sometimes conflict with traditional norms. Analytic processing was more clearly linked to age and to intelligence than heuristic processing. Implications for cognitive development, the competence/performance issue, and rationality are discussed.

24 CFR 92.61 - Program description.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Development HOME INVESTMENT PARTNERSHIPS PROGRAM Allocation Formula Insular Areas Program § 92.61 Program... occupied) and, for tenant assistance, number of households to be assisted; (3) A timetable for the... use other forms of investment not described in § 92.205(b), a description of the other forms of...

24 CFR 92.61 - Program description.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Development HOME INVESTMENT PARTNERSHIPS PROGRAM Allocation Formula Insular Areas Program § 92.61 Program... occupied) and, for tenant assistance, number of households to be assisted; (3) A timetable for the... use other forms of investment not described in § 92.205(b), a description of the other forms of...

49 CFR 572.15 - General description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) ANTHROPOMORPHIC TEST DEVICES 3-Year-Old Child § 572.15 General description. (a) The dummy consists of the component assemblies specified in drawing SA 103C 001, which are described in their entirety by means of approximately 122 drawings and specifications and an...

The GF-3 SAR Data Processor

PubMed Central

Han, Bing; Ding, Chibiao; Zhong, Lihua; Liu, Jiayin; Qiu, Xiaolan; Hu, Yuxin; Lei, Bin

2018-01-01

The Gaofen-3 (GF-3) data processor was developed as a workstation-based GF-3 synthetic aperture radar (SAR) data processing system. The processor consists of two vital subsystems of the GF-3 ground segment, which are referred to as data ingesting subsystem (DIS) and product generation subsystem (PGS). The primary purpose of DIS is to record and catalogue GF-3 raw data with a transferring format, and PGS is to produce slant range or geocoded imagery from the signal data. This paper presents a brief introduction of the GF-3 data processor, including descriptions of the system architecture, the processing algorithms and its output format. PMID:29534464

Operation and model description of a sequencing batch reactor treating reject water for biological nitrogen removal via nitrite.

PubMed

Dosta, J; Galí, A; Benabdallah El-Hadj, T; Macé, S; Mata-Alvarez, J

2007-08-01

The aim of this study was the operation and model description of a sequencing batch reactor (SBR) for biological nitrogen removal (BNR) from a reject water (800-900 mg NH(4)(+)-NL(-1)) from a municipal wastewater treatment plant (WWTP). The SBR was operated with three cycles per day, temperature 30 degrees C, SRT 11 days and HRT 1 day. During the operational cycle, three alternating oxic/anoxic periods were performed to avoid alkalinity restrictions. Oxygen supply and working pH range were controlled to achieve the BNR via nitrite, which makes the process more economical. Under steady state conditions, a total nitrogen removal of 0.87 kg N (m(3)day)(-1) was reached. A four-step nitrogen removal model was developed to describe the process. This model enlarges the IWA activated sludge models for a more detailed description of the nitrogen elimination processes and their inhibitions. A closed intermittent-flow respirometer was set up for the estimation of the most relevant model parameters. Once calibrated, model predictions reproduced experimental data accurately.