40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

40 CFR 265.11 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Identification number. 265.11 Section... FACILITIES General Facility Standards § 265.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

40 CFR 264.11 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false Identification number. 264.11 Section... Facility Standards § 264.11 Identification number. Every facility owner or operator must apply to EPA for an EPA identification number in accordance with the EPA notification procedures (45 FR 12746). [45 FR...

Accurate mass measurements and their appropriate use for reliable analyte identification.

PubMed

Godfrey, A Ruth; Brenton, A Gareth

2012-09-01

Accurate mass instrumentation is becoming increasingly available to non-expert users. This data can be mis-used, particularly for analyte identification. Current best practice in assigning potential elemental formula for reliable analyte identification has been described with modern informatic approaches to analyte elucidation, including chemometric characterisation, data processing and searching using facilities such as the Chemical Abstracts Service (CAS) Registry and Chemspider.

16 CFR 303.20 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 303.20... identification numbers. (a) Registered numbers for use as the required identification in lieu of the name on... the form set out in paragraph (d) of this section. (b)(1) Registered identification numbers shall be...

MALDI-TOF MS identification of anaerobic bacteria: assessment of pre-analytical variables and specimen preparation techniques.

PubMed

Hsu, Yen-Michael S; Burnham, Carey-Ann D

2014-06-01

Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) has emerged as a tool for identifying clinically relevant anaerobes. We evaluated the analytical performance characteristics of the Bruker Microflex with Biotyper 3.0 software system for identification of anaerobes and examined the impact of direct formic acid (FA) treatment and other pre-analytical factors on MALDI-TOF MS performance. A collection of 101 anaerobic bacteria were evaluated, including Clostridium spp., Propionibacterium spp., Fusobacterium spp., Bacteroides spp., and other anaerobic bacterial of clinical relevance. The results of our study indicate that an on-target extraction with 100% FA improves the rate of accurate identification without introducing misidentification (P<0.05). In addition, we modify the reporting cutoffs for the Biotyper "score" yielding acceptable identification. We found that a score of ≥1.700 can maximize the rate of identification. Of interest, MALDI-TOF MS can correctly identify anaerobes grown in suboptimal conditions, such as on selective culture media and following oxygen exposure. In conclusion, we report on a number of simple and cost-effective pre- and post-analytical modifications could enhance MALDI-TOF MS identification for anaerobic bacteria. Copyright © 2014 Elsevier Inc. All rights reserved.

46 CFR 10.207 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-10-01

... recordkeeping purposes only, a mariner's official MMC identification number is the individual's social security number. However, a unique serial number, and not the social security number, will appear on the... 46 Shipping 1 2010-10-01 2010-10-01 false Identification number. 10.207 Section 10.207 Shipping...

14 CFR 47.15 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... REGISTRATION General § 47.15 Identification number. (a) Number required. An applicant for Aircraft Registration must place a U.S. identification number (registration mark) on his Aircraft Registration Application... holder of a Dealer's Aircraft Registration Certificate who applies for a temporary registration number...

27 CFR 19.242 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... number. 19.242 Section 19.242 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... for Employer Identification Numbers § 19.242 Employer identification number. The proprietor must enter the employer identification number (EIN) assigned to it by the Internal Revenue Service on each form...

16 CFR 301.26 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 301.26... numbers. (a) Registered numbers for use as the required identification in lieu of the name on fur product... (d) of this section. (b)(1) Registered identification numbers shall be used only by the person or...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

7 CFR 29.32 - Identification number.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Identification number. 29.32 Section 29.32 Agriculture... INSPECTION Regulations Definitions § 29.32 Identification number. A number or a combination of letters and numbers in a design or mark approved by the Director, stamped, printed, or stenciled on a lot of tobacco...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

40 CFR 262.12 - EPA identification numbers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false EPA identification numbers. 262.12... (CONTINUED) STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE General § 262.12 EPA identification numbers... waste without having received an EPA identification number from the Administrator. (b) A generator who...

20 CFR 422.112 - Employer identification numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 2 2012-04-01 2012-04-01 false Employer identification numbers. 422.112... Procedures § 422.112 Employer identification numbers. (a) General. Most employers are required by section...)-1 to obtain an employer identification number (EIN) and to include it on wage reports filed with SSA...

20 CFR 422.112 - Employer identification numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 2 2014-04-01 2014-04-01 false Employer identification numbers. 422.112... Procedures § 422.112 Employer identification numbers. (a) General. Most employers are required by section...)-1 to obtain an employer identification number (EIN) and to include it on wage reports filed with SSA...

33 CFR 181.29 - Hull identification number display.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Hull identification number... identification number display. Two identical hull identification numbers are required to be displayed on each boat hull. (a) The primary hull identification number must be affixed— (1) On boats with transoms, to...

33 CFR 181.29 - Hull identification number display.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Hull identification number... identification number display. Two identical hull identification numbers are required to be displayed on each boat hull. (a) The primary hull identification number must be affixed— (1) On boats with transoms, to...

33 CFR 181.29 - Hull identification number display.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hull identification number... SECURITY (CONTINUED) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.29 Hull identification number display. Two identical hull identification numbers are required to be displayed on each...

33 CFR 181.25 - Hull identification number format.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hull identification number format... (CONTINUED) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.25 Hull identification number format. Each of the hull identification numbers required by § 181.23 must consist of twelve...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 2 2014-01-01 2014-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 2 2013-01-01 2013-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 2 2011-01-01 2011-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

7 CFR 29.9205 - Identification number (farm serial number).

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 2 2012-01-01 2012-01-01 false Identification number (farm serial number). 29.9205 Section 29.9205 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE... number (farm serial number). The serial number assigned to an individual farm by the appropriate office...

19 CFR 24.5 - Filing identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 19 Customs Duties 1 2010-04-01 2010-04-01 false Filing identification number. 24.5 Section 24.5... TREASURY CUSTOMS FINANCIAL AND ACCOUNTING PROCEDURE § 24.5 Filing identification number. (a) Generally..., Notification of Importer's Number or Application for Importer's Number, or Notice of Change of Name or Address...

19 CFR 24.5 - Filing identification number.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 19 Customs Duties 1 2013-04-01 2013-04-01 false Filing identification number. 24.5 Section 24.5... TREASURY CUSTOMS FINANCIAL AND ACCOUNTING PROCEDURE § 24.5 Filing identification number. (a) Generally..., Notification of Importer's Number or Application for Importer's Number, or Notice of Change of Name or Address...

27 CFR 46.102 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 46.102 Section 46.102 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE....102 Employer identification number. (a) Requirement. The employer identification number (as defined in 26 CFR 301.7701-12) of the taxpayer who has been assigned such a number must be shown on each special...

27 CFR 31.115 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... number. 31.115 Section 31.115 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE....115 Employer identification number. (a) Requirement. The employer identification number (as defined in 26 CFR 301.7701-12) of a dealer who has been assigned such a number must be shown on each...

19 CFR 24.5 - Filing identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 19 Customs Duties 1 2011-04-01 2011-04-01 false Filing identification number. 24.5 Section 24.5... TREASURY CUSTOMS FINANCIAL AND ACCOUNTING PROCEDURE § 24.5 Filing identification number. (a) Generally..., Notification of Importer's Number or Application for Importer's Number, or Notice of Change of Name or Address...

27 CFR 40.359 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 40.359 Section 40.359 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... identification number. The employer identification number (EIN) (defined at 26 CFR 301.7701-12) of a manufacturer of cigarette papers and/or tubes who has been assigned such a number shall be shown on each...

27 CFR 53.22 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 53.22 Section 53.22 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... AMMUNITION Administrative and Miscellaneous Provisions § 53.22 Employer identification number. (a... earlier been assigned an employer identification number or has not applied for one, shall make an...

27 CFR 17.22 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... number. 17.22 Section 17.22 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... NONBEVERAGE PRODUCTS Registration § 17.22 Employer identification number. Every person who claims drawback..., and Firearms Taxes, the employer identification number (EIN) assigned by the Internal Revenue Service...

49 CFR 172.338 - Replacement of identification numbers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 2 2013-10-01 2013-10-01 false Replacement of identification numbers. 172.338..., TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.338 Replacement of identification numbers. If more than one of the identification number markings on placards, orange panels, or white square-on-point...

49 CFR 172.338 - Replacement of identification numbers.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Replacement of identification numbers. 172.338..., TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.338 Replacement of identification numbers. If more than one of the identification number markings on placards, orange panels, or white square-on-point...

49 CFR 172.338 - Replacement of identification numbers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 2 2011-10-01 2011-10-01 false Replacement of identification numbers. 172.338..., TRAINING REQUIREMENTS, AND SECURITY PLANS Marking § 172.338 Replacement of identification numbers. If more than one of the identification number markings on placards, orange panels, or white square-on-point...

33 CFR 181.23 - Hull identification numbers required.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Hull identification numbers... identification numbers required. (a) A manufacturer must identify each boat produced or imported with primary and secondary hull identification numbers permanently affixed in accordance with § 181.29 of this subpart. (b) A...

33 CFR 181.23 - Hull identification numbers required.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Hull identification numbers... identification numbers required. (a) A manufacturer must identify each boat produced or imported with primary and secondary hull identification numbers permanently affixed in accordance with § 181.29 of this subpart. (b) A...

15 CFR 14.18 - Taxpayer identification number.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Taxpayer identification number. 14.18... COMMERCIAL ORGANIZATIONS Pre-Award Requirements § 14.18 Taxpayer identification number. In accordance with... identifying number will be required from applicants for grants and cooperative agreements funded by the DoC...

A novel analytical technique suitable for the identification of plastics.

PubMed

Nečemer, Marijan; Kump, Peter; Sket, Primož; Plavec, Janez; Grdadolnik, Jože; Zvanut, Maja

2013-01-01

The enormous development and production of plastic materials in the last century resulted in increasing numbers of such kinds of objects. Development of a simple and fast technique to classify different types of plastics could be used in many activities dealing with plastic materials such as packaging of food, sorting of used plastic materials, and also, if technique would be non-destructive, for conservation of plastic artifacts in museum collections, a relatively new field of interest since 1990. In our previous paper we introduced a non-destructive technique for fast identification of unknown plastics based on EDXRF spectrometry,1 using as a case study some plastic artifacts archived in the Museum in order to show the advantages of the nondestructive identification of plastic material. In order to validate our technique it was necessary to apply for this purpose the comparison of analyses with some of the analytical techniques, which are more suitable and so far rather widely applied in identifying some most common sorts of plastic materials.

16 CFR 303.20 - Registered identification numbers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... identification numbers. (a) Registered numbers for use as the required identification in lieu of the name on.... When so used by the person or firm to whom assigned, the use of the numbers shall be construed as..., Federal Trade Commission, 600 Pennsylvania Avenue, NW., Washington, DC 20580, or on the Internet at http...

27 CFR 40.169 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... number. 40.169 Section 40.169 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Payment of Taxes on Tobacco Products § 40.169 Employer identification number. The employer identification number (defined at 26 CFR 301.7701-12) of a manufacturer of tobacco products who has been assigned such a...

33 CFR 181.23 - Hull identification numbers required.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Hull identification numbers... SECURITY (CONTINUED) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.23 Hull... identify each boat produced or imported with two hull identification numbers that meet the requirements of...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 27 2013-07-01 2013-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 27 2012-07-01 2012-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 25 2010-07-01 2010-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 26 2014-07-01 2014-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 263.11 - EPA identification number.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 26 2011-07-01 2011-07-01 false EPA identification number. 263.11... (CONTINUED) STANDARDS APPLICABLE TO TRANSPORTERS OF HAZARDOUS WASTE General § 263.11 EPA identification number. (a) A transporter must not transport hazardous wastes without having received an EPA...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 31 2011-07-01 2011-07-01 false EPA identification numbers. 761.202... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 31 2014-07-01 2014-07-01 false EPA identification numbers. 761.202... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 32 2013-07-01 2013-07-01 false EPA identification numbers. 761.202... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any generator, commercial storer, transporter, or disposer of PCB waste who is required to have an EPA identification number under this subpart must notify EPA of his/her PCB waste handling activities, using the...

40 CFR 761.202 - EPA identification numbers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... PROHIBITIONS PCB Waste Disposal Records and Reports § 761.202 EPA identification numbers. (a) General. Any... identification number from EPA. (4) A disposer of PCB waste shall not accept any PCB waste for disposal without... disposal facility or mobile treatment unit shall not accept waste unless the disposer has received an EPA...

Analyte species and concentration identification using differentially functionalized microcantilever arrays and artificial neural networks

DOE Office of Scientific and Technical Information (OSTI.GOV)

Senesac, Larry R; Datskos, Panos G; Sepaniak, Michael J

2006-01-01

In the present work, we have performed analyte species and concentration identification using an array of ten differentially functionalized microcantilevers coupled with a back-propagation artificial neural network pattern recognition algorithm. The array consists of ten nanostructured silicon microcantilevers functionalized by polymeric and gas chromatography phases and macrocyclic receptors as spatially dense, differentially responding sensing layers for identification and quantitation of individual analyte(s) and their binary mixtures. The array response (i.e. cantilever bending) to analyte vapor was measured by an optical readout scheme and the responses were recorded for a selection of individual analytes as well as several binary mixtures. Anmore » artificial neural network (ANN) was designed and trained to recognize not only the individual analytes and binary mixtures, but also to determine the concentration of individual components in a mixture. To the best of our knowledge, ANNs have not been applied to microcantilever array responses previously to determine concentrations of individual analytes. The trained ANN correctly identified the eleven test analyte(s) as individual components, most with probabilities greater than 97%, whereas it did not misidentify an unknown (untrained) analyte. Demonstrated unique aspects of this work include an ability to measure binary mixtures and provide both qualitative (identification) and quantitative (concentration) information with array-ANN-based sensor methodologies.« less

26 CFR 31.6011(b)-1 - Employers' identification numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 15 2013-04-01 2013-04-01 false Employers' identification numbers. 31.6011(b)-1... Subtitle F, Internal Revenue Code of 1954) § 31.6011(b)-1 Employers' identification numbers. (a... Insurance Contributions Act, but who prior to such day neither has been assigned an identification number...

26 CFR 31.6011(b)-1 - Employers' identification numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 15 2014-04-01 2014-04-01 false Employers' identification numbers. 31.6011(b)-1... Subtitle F, Internal Revenue Code of 1954) § 31.6011(b)-1 Employers' identification numbers. (a... Insurance Contributions Act, but who prior to such day neither has been assigned an identification number...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 2 2012-04-01 2012-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 2 2014-04-01 2014-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 2 2013-04-01 2013-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

24 CFR 200.6 - Employer identification and social security numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Employer identification and social... identification and social security numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of social security numbers and employer identification numbers by applicants and...

41 CFR 109-38.5203 - Watercraft identification and numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... identification and numbers. 109-38.5203 Section 109-38.5203 Public Contracts and Property Management Federal... Watercraft identification and numbers. Watercraft in the custody of DOE or designated contractors shall display identifying numbers, whether issued by the U.S. Coast Guard, State, or local field organization...

Note: Model identification and analysis of bivalent analyte surface plasmon resonance data.

PubMed

Tiwari, Purushottam Babu; Üren, Aykut; He, Jin; Darici, Yesim; Wang, Xuewen

2015-10-01

Surface plasmon resonance (SPR) is a widely used, affinity based, label-free biophysical technique to investigate biomolecular interactions. The extraction of rate constants requires accurate identification of the particular binding model. The bivalent analyte model involves coupled non-linear differential equations. No clear procedure to identify the bivalent analyte mechanism has been established. In this report, we propose a unique signature for the bivalent analyte model. This signature can be used to distinguish the bivalent analyte model from other biphasic models. The proposed method is demonstrated using experimentally measured SPR sensorgrams.

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 19 2014-07-01 2014-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.414-78 - Submission of vehicle identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Submission of vehicle identification... vehicle identification number. (a) Upon request by the Administrator, the manufacturer of any motorcycle covered by a certificate of conformity shall, within 30 days, identify by vehicle identification number...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 19 2012-07-01 2012-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 18 2010-07-01 2010-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 18 2011-07-01 2011-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

40 CFR 86.079-36 - Submission of vehicle identification numbers.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 19 2013-07-01 2013-07-01 false Submission of vehicle identification... identification numbers. (a) Upon request of the Administrator, the manufacturer of any light-duty vehicle or... identification number, the vehicle(s) covered by the certificate of conformity. (b) The manufacturer of any light...

76 FR 7757 - Hull Identification Numbers for Recreational Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-11

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 181 [Docket No. USCG-2007-29236] Hull Identification Numbers for Recreational Vessels AGENCY: Coast Guard, DHS. ACTION: Follow-up to request for... expanded hull identification number (HIN). The Coast Guard's decision-making process included consideration...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 6 2013-10-01 2013-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2011 CFR

2011-10-01

... 49 Transportation 6 2011-10-01 2011-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 6 2014-10-01 2014-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2012 CFR

2012-10-01

... 49 Transportation 6 2012-10-01 2012-10-01 false Vehicle Identification Number Information D.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...) characters, of vehicle identification numbers reported in information on incidents involving death or injury...

77 FR 59575 - Hull Identification Numbers for Recreational Vessels

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 181 [Docket No. USCG-2012-0843] Hull Identification Numbers for Recreational Vessels AGENCY: Coast Guard, DHS. ACTION: Request for public comments... requirement to indicate a boat's model year as part of the 12-character Hull Identification Number (HIN...

Plant Aquaporins: Genome-Wide Identification, Transcriptomics, Proteomics, and Advanced Analytical Tools.

PubMed

Deshmukh, Rupesh K; Sonah, Humira; Bélanger, Richard R

2016-01-01

Aquaporins (AQPs) are channel-forming integral membrane proteins that facilitate the movement of water and many other small molecules. Compared to animals, plants contain a much higher number of AQPs in their genome. Homology-based identification of AQPs in sequenced species is feasible because of the high level of conservation of protein sequences across plant species. Genome-wide characterization of AQPs has highlighted several important aspects such as distribution, genetic organization, evolution and conserved features governing solute specificity. From a functional point of view, the understanding of AQP transport system has expanded rapidly with the help of transcriptomics and proteomics data. The efficient analysis of enormous amounts of data generated through omic scale studies has been facilitated through computational advancements. Prediction of protein tertiary structures, pore architecture, cavities, phosphorylation sites, heterodimerization, and co-expression networks has become more sophisticated and accurate with increasing computational tools and pipelines. However, the effectiveness of computational approaches is based on the understanding of physiological and biochemical properties, transport kinetics, solute specificity, molecular interactions, sequence variations, phylogeny and evolution of aquaporins. For this purpose, tools like Xenopus oocyte assays, yeast expression systems, artificial proteoliposomes, and lipid membranes have been efficiently exploited to study the many facets that influence solute transport by AQPs. In the present review, we discuss genome-wide identification of AQPs in plants in relation with recent advancements in analytical tools, and their availability and technological challenges as they apply to AQPs. An exhaustive review of omics resources available for AQP research is also provided in order to optimize their efficient utilization. Finally, a detailed catalog of computational tools and analytical pipelines is

Plant Aquaporins: Genome-Wide Identification, Transcriptomics, Proteomics, and Advanced Analytical Tools

PubMed Central

Deshmukh, Rupesh K.; Sonah, Humira; Bélanger, Richard R.

2016-01-01

Aquaporins (AQPs) are channel-forming integral membrane proteins that facilitate the movement of water and many other small molecules. Compared to animals, plants contain a much higher number of AQPs in their genome. Homology-based identification of AQPs in sequenced species is feasible because of the high level of conservation of protein sequences across plant species. Genome-wide characterization of AQPs has highlighted several important aspects such as distribution, genetic organization, evolution and conserved features governing solute specificity. From a functional point of view, the understanding of AQP transport system has expanded rapidly with the help of transcriptomics and proteomics data. The efficient analysis of enormous amounts of data generated through omic scale studies has been facilitated through computational advancements. Prediction of protein tertiary structures, pore architecture, cavities, phosphorylation sites, heterodimerization, and co-expression networks has become more sophisticated and accurate with increasing computational tools and pipelines. However, the effectiveness of computational approaches is based on the understanding of physiological and biochemical properties, transport kinetics, solute specificity, molecular interactions, sequence variations, phylogeny and evolution of aquaporins. For this purpose, tools like Xenopus oocyte assays, yeast expression systems, artificial proteoliposomes, and lipid membranes have been efficiently exploited to study the many facets that influence solute transport by AQPs. In the present review, we discuss genome-wide identification of AQPs in plants in relation with recent advancements in analytical tools, and their availability and technological challenges as they apply to AQPs. An exhaustive review of omics resources available for AQP research is also provided in order to optimize their efficient utilization. Finally, a detailed catalog of computational tools and analytical pipelines is

26 CFR 301.7701-12 - Employer identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Employer identification number. 301.7701-12 Section 301.7701-12 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURE AND ADMINISTRATION PROCEDURE AND ADMINISTRATION Definitions § 301.7701-12 Employer identification...

78 FR 26244 - Updating of Employer Identification Numbers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-06

... (including updated application information regarding the name and taxpayer identifying number of the... require these persons to update application information regarding the name and taxpayer identifying number..., Application for Employer Identification Number, requires entities to disclose the name of the EIN applicant's...

78 FR 913 - IRS Truncated Taxpayer Identification Numbers

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-07

... taxpayer identification number, a TTIN. As an alternative to using a social security number (SSN), IRS... concerns about the risk of identity theft stemming from the inclusion of a taxpayer identifying number on a...) authorizes the Secretary to prescribe regulations with respect to the inclusion in returns, statements, or...

33 CFR 181.27 - Information displayed near hull identification number.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Information displayed near hull... displayed near hull identification number. With the exception of the characters “US-”, which constitute the... the 12-character hull identification number (HIN), that information must be separated from the HIN by...

Identification of serial number on bank card using recurrent neural network

NASA Astrophysics Data System (ADS)

Liu, Li; Huang, Linlin; Xue, Jian

2018-04-01

Identification of serial number on bank card has many applications. Due to the different number printing mode, complex background, distortion in shape, etc., it is quite challenging to achieve high identification accuracy. In this paper, we propose a method using Normalization-Cooperated Gradient Feature (NCGF) and Recurrent Neural Network (RNN) based on Long Short-Term Memory (LSTM) for serial number identification. The NCGF maps the gradient direction elements of original image to direction planes such that the RNN with direction planes as input can recognize numbers more accurately. Taking the advantages of NCGF and RNN, we get 90%digit string recognition accuracy.

48 CFR 1652.204-73 - Taxpayer Identification Number.

Code of Federal Regulations, 2013 CFR

2013-10-01

... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

48 CFR 1652.204-73 - Taxpayer Identification Number.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

48 CFR 1652.204-73 - Taxpayer Identification Number.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

48 CFR 1652.204-73 - Taxpayer Identification Number.

Code of Federal Regulations, 2012 CFR

2012-10-01

... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

48 CFR 1652.204-73 - Taxpayer Identification Number.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Identification Number (TIN), as used in this provision, means the number required by the Internal Revenue Service... information will result in payment being withheld until the TIN number is provided. (c) The Government may use the TIN to collect and report on any delinquent amounts arising out of the Carrier's relationship with...

Proposing national identification number on dental prostheses as universal personal identification code - A revolution in forensic odontology

PubMed Central

Baad, Rajendra K.; Belgaumi, Uzma; Vibhute, Nupura; Kadashetti, Vidya; Chandrappa, Pramod Redder; Gugwad, Sushma

2015-01-01

The proper identification of a decedent is not only important for humanitarian and emotional reasons, but also for legal and administrative purposes. During the reconstructive identification process, all necessary information is gathered from the unknown body of the victim and hence that an objective reconstructed profile can be established. Denture marking systems are being used in various situations, and a number of direct and indirect methods are reported. We propose that national identification numbers be incorporated in all removable and fixed prostheses, so as to adopt a single and definitive universal personal identification code with the aim of achieving a uniform, standardized, easy, and fast identification method worldwide for forensic identification. PMID:26005294

DETAILS OF REMOTE ANALYTICAL FACILITY (CPP627). INL DRAWING NUMBER 200062700098105071. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

DETAILS OF REMOTE ANALYTICAL FACILITY (CPP-627). INL DRAWING NUMBER 200-0627-00-098-105071. ALTERNATE ID NUMBER 4272-14-108. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

A Meta-Analytic Review of Social Identification and Health in Organizational Contexts.

PubMed

Steffens, Niklas K; Haslam, S Alexander; Schuh, Sebastian C; Jetten, Jolanda; van Dick, Rolf

2017-11-01

We provide a meta-analytical review examining two decades of work on the relationship between individuals' social identifications and health in organizations (102 effect sizes, k = 58, N = 19,799). Results reveal a mean-weighted positive association between organizational identification and health ( r = .21, T = .14). Analysis identified a positive relationship for both workgroup ( r = .21) and organizational identification ( r = .21), and in studies using longitudinal/experimental ( r = .13) and cross-sectional designs ( r = .22). The relationship is stronger (a) for indicators of the presence of well-being ( r = .27) than absence of stress ( r = .18), (b) for psychological ( r = .23) than physical health ( r = .16), (c) to the extent that identification is shared among group members, and (d) as the proportion of female participants in a sample decreases. Overall, results indicate that social identifications in organizations are positively associated with health but that there is also substantial variation in effect size strength. We discuss implications for theory and practice and outline a roadmap for future research.

49 CFR Appendix D to Part 512 - Vehicle Identification Number Information

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 6 2010-10-01 2010-10-01 false Vehicle Identification Number Information D Appendix D to Part 512 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL.... 512, App. D Appendix D to Part 512—Vehicle Identification Number Information The Chief Counsel has...

48 CFR 1604.970 - Taxpayer Identification Number.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 6 2014-10-01 2014-10-01 false Taxpayer Identification Number. 1604.970 Section 1604.970 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Taxpayer...

48 CFR 1604.970 - Taxpayer Identification Number.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Taxpayer Identification Number. 1604.970 Section 1604.970 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Taxpayer...

48 CFR 1604.970 - Taxpayer Identification Number.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 6 2013-10-01 2013-10-01 false Taxpayer Identification Number. 1604.970 Section 1604.970 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Taxpayer...

48 CFR 1604.970 - Taxpayer Identification Number.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 6 2011-10-01 2011-10-01 false Taxpayer Identification Number. 1604.970 Section 1604.970 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Taxpayer...

48 CFR 1604.970 - Taxpayer Identification Number.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 6 2012-10-01 2012-10-01 false Taxpayer Identification Number. 1604.970 Section 1604.970 Federal Acquisition Regulations System OFFICE OF PERSONNEL MANAGEMENT FEDERAL EMPLOYEES HEALTH BENEFITS ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Taxpayer...

Identification of Bodies by Unique Serial Numbers on Implanted Medical Devices.

PubMed

Blessing, Melissa M; Lin, Peter T

2018-05-01

Visual identification is the most common identification method used by medical examiners but is not always possible. Alternative methods include X-ray, fingerprint, or DNA comparison, but these methods require additional resources. Comparison of serial numbers on implanted medical devices is a rapid and definitive method of identification. To assess the practicality of using this method, we reviewed 608 consecutive forensic autopsies performed at a regional medical examiner office. Of these, 56 cases required an alternative method of identification due to decomposition (n = 35), gunshot wound (n = 9), blunt trauma (n = 6), or charring (n = 6). Of these 56 cases, eight (14.3%) were known to have an implanted medical device. Of these eight cases, five (63%) could be positively identified by comparing serial numbers. If an implanted medical device is known to be present, and medical records are available, identification by medical device serial number should be a first-line method. © 2017 American Academy of Forensic Sciences.

20 CFR 422.112 - Employer identification numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Employer identification numbers. 422.112 Section 422.112 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ORGANIZATION AND PROCEDURES General..., and domestic corporations which elect social security coverage for employees of foreign subsidiaries...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 15 2013-04-01 2013-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 15 2011-04-01 2011-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 15 2012-04-01 2012-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 15 2014-04-01 2014-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

26 CFR 31.3406(j)-1 - Taxpayer Identification Number (TIN) matching program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Taxpayer Identification Number (TIN) matching... Number (TIN) matching program. (a) The matching program. Under section 3406(i), the Commissioner has the authority to establish Taxpayer Identification Number (TIN) matching programs. The Commissioner may...

48 CFR 2152.204-70 - Taxpayer Identification Number.

Code of Federal Regulations, 2014 CFR

2014-10-01

... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

48 CFR 2152.204-70 - Taxpayer Identification Number.

Code of Federal Regulations, 2012 CFR

2012-10-01

... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

48 CFR 2152.204-70 - Taxpayer Identification Number.

Code of Federal Regulations, 2013 CFR

2013-10-01

... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

48 CFR 2152.204-70 - Taxpayer Identification Number.

Code of Federal Regulations, 2011 CFR

2011-10-01

... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

48 CFR 2152.204-70 - Taxpayer Identification Number.

Code of Federal Regulations, 2010 CFR

2010-10-01

... basis, and of which the Contractor is a member. Taxpayer Identification Number (TIN), as used in this... reporting income tax and other returns. The TIN is the Contractor's Social Security Number. (b) The... information will result in payment being withheld until the TIN is provided. (c) The Government may use the...

27 CFR 479.35 - Employer identification number.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2014-04-01 2014-04-01 false Employer identification number. 479.35 Section 479.35 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.35 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2012-04-01 2010-04-01 true Employer identification number. 479.35 Section 479.35 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.35 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2011-04-01 2010-04-01 true Employer identification number. 479.35 Section 479.35 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.35 - Employer identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Employer identification number. 479.35 Section 479.35 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

27 CFR 479.35 - Employer identification number.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 3 2013-04-01 2013-04-01 false Employer identification number. 479.35 Section 479.35 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO, FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 232.616 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 232.616 Section 232.616 Housing and Urban... Borrowers § 232.616 Disclosure and verification of Social Security and Employer Identification Numbers. To... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

Identification of missing variants by combining multiple analytic pipelines.

PubMed

Ren, Yingxue; Reddy, Joseph S; Pottier, Cyril; Sarangi, Vivekananda; Tian, Shulan; Sinnwell, Jason P; McDonnell, Shannon K; Biernacka, Joanna M; Carrasquillo, Minerva M; Ross, Owen A; Ertekin-Taner, Nilüfer; Rademakers, Rosa; Hudson, Matthew; Mainzer, Liudmila Sergeevna; Asmann, Yan W

2018-04-16

After decades of identifying risk factors using array-based genome-wide association studies (GWAS), genetic research of complex diseases has shifted to sequencing-based rare variants discovery. This requires large sample sizes for statistical power and has brought up questions about whether the current variant calling practices are adequate for large cohorts. It is well-known that there are discrepancies between variants called by different pipelines, and that using a single pipeline always misses true variants exclusively identifiable by other pipelines. Nonetheless, it is common practice today to call variants by one pipeline due to computational cost and assume that false negative calls are a small percent of total. We analyzed 10,000 exomes from the Alzheimer's Disease Sequencing Project (ADSP) using multiple analytic pipelines consisting of different read aligners and variant calling strategies. We compared variants identified by using two aligners in 50,100, 200, 500, 1000, and 1952 samples; and compared variants identified by adding single-sample genotyping to the default multi-sample joint genotyping in 50,100, 500, 2000, 5000 and 10,000 samples. We found that using a single pipeline missed increasing numbers of high-quality variants correlated with sample sizes. By combining two read aligners and two variant calling strategies, we rescued 30% of pass-QC variants at sample size of 2000, and 56% at 10,000 samples. The rescued variants had higher proportions of low frequency (minor allele frequency [MAF] 1-5%) and rare (MAF < 1%) variants, which are the very type of variants of interest. In 660 Alzheimer's disease cases with earlier onset ages of ≤65, 4 out of 13 (31%) previously-published rare pathogenic and protective mutations in APP, PSEN1, and PSEN2 genes were undetected by the default one-pipeline approach but recovered by the multi-pipeline approach. Identification of the complete variant set from sequencing data is the prerequisite of genetic

16 CFR 300.4 - Registered identification numbers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 16 Commercial Practices 1 2011-01-01 2011-01-01 false Registered identification numbers. 300.4 Section 300.4 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULES AND REGULATIONS UNDER THE WOOL PRODUCTS LABELING ACT OF 1939 Labeling § 300.4 Registered...

27 CFR 25.168 - Employer identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Employer identification number. 25.168 Section 25.168 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Preparation and Remittance of Tax Returns...

27 CFR 25.168 - Employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Employer identification number. 25.168 Section 25.168 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Preparation and Remittance of Tax Returns...

27 CFR 25.168 - Employer identification number.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Employer identification number. 25.168 Section 25.168 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Preparation and Remittance of Tax Returns...

27 CFR 25.168 - Employer identification number.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Employer identification number. 25.168 Section 25.168 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Preparation and Remittance of Tax Returns...

27 CFR 25.168 - Employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Employer identification number. 25.168 Section 25.168 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Preparation and Remittance of Tax Returns...

An analytic modeling and system identification study of rotor/fuselage dynamics at hover

NASA Technical Reports Server (NTRS)

Hong, Steven W.; Curtiss, H. C., Jr.

1993-01-01

A combination of analytic modeling and system identification methods have been used to develop an improved dynamic model describing the response of articulated rotor helicopters to control inputs. A high-order linearized model of coupled rotor/body dynamics including flap and lag degrees of freedom and inflow dynamics with literal coefficients is compared to flight test data from single rotor helicopters in the near hover trim condition. The identification problem was formulated using the maximum likelihood function in the time domain. The dynamic model with literal coefficients was used to generate the model states, and the model was parametrized in terms of physical constants of the aircraft rather than the stability derivatives resulting in a significant reduction in the number of quantities to be identified. The likelihood function was optimized using the genetic algorithm approach. This method proved highly effective in producing an estimated model from flight test data which included coupled fuselage/rotor dynamics. Using this approach it has been shown that blade flexibility is a significant contributing factor to the discrepancies between theory and experiment shown in previous studies. Addition of flexible modes, properly incorporating the constraint due to the lag dampers, results in excellent agreement between flight test and theory, especially in the high frequency range.

An analytic modeling and system identification study of rotor/fuselage dynamics at hover

NASA Technical Reports Server (NTRS)

Hong, Steven W.; Curtiss, H. C., Jr.

1993-01-01

A combination of analytic modeling and system identification methods have been used to develop an improved dynamic model describing the response of articulated rotor helicopters to control inputs. A high-order linearized model of coupled rotor/body dynamics including flap and lag degrees of freedom and inflow dynamics with literal coefficients is compared to flight test data from single rotor helicopters in the near hover trim condition. The identification problem was formulated using the maximum likelihood function in the time domain. The dynamic model with literal coefficients was used to generate the model states, and the model was parametrized in terms of physical constants of the aircraft rather than the stability derivatives, resulting in a significant reduction in the number of quantities to be identified. The likelihood function was optimized using the genetic algorithm approach. This method proved highly effective in producing an estimated model from flight test data which included coupled fuselage/rotor dynamics. Using this approach it has been shown that blade flexibility is a significant contributing factor to the discrepancies between theory and experiment shown in previous studies. Addition of flexible modes, properly incorporating the constraint due to the lag dampers, results in excellent agreement between flight test and theory, especially in the high frequency range.

21 CFR 801.57 - Discontinuation of legacy FDA identification numbers assigned to devices.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 21 Food and Drugs 8 2014-04-01 2014-04-01 false Discontinuation of legacy FDA identification... Device Identification § 801.57 Discontinuation of legacy FDA identification numbers assigned to devices... been assigned an FDA labeler code to facilitate use of NHRIC or NDC numbers may continue to use that...

Identification of Synthetic Polymers and Copolymers by Analytical Pyrolysis-Gas Chromatography/Mass Spectrometry

ERIC Educational Resources Information Center

Kusch, Peter

2014-01-01

An experiment for the identification of synthetic polymers and copolymers by analytical pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was developed and performed in the polymer analysis courses for third-year undergraduate students of chemistry with material sciences, and for first-year postgraduate students of polymer sciences. In…

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

24 CFR 5.216 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 5.216 Section 5.216 Housing and Urban Development...; WAIVERS Disclosure and Verification of Social Security Numbers and Employer Identification Numbers; Procedures for Obtaining Income Information Disclosure and Verification of Social Security Numbers and...

33 CFR 187.321 - What are the hull identification number (HIN) provisions?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false What are the hull identification number (HIN) provisions? 187.321 Section 187.321 Navigation and Navigable Waters COAST GUARD, DEPARTMENT... Vessel Titling Systems § 187.321 What are the hull identification number (HIN) provisions? A State must...

49 CFR 172.332 - Identification number markings.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 160 mm (6.3 inches) high by 400 mm (15.7 inches) wide with a 15 mm (0.6 inches) black outer border. The identification number shall be displayed in 100 mm (3.9 inches) black Helvetica Medium numerals on the orange panel. Measurements may vary from those specified plus or minus 5 mm (0.2 inches). (2) The...

49 CFR 172.332 - Identification number markings.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 160 mm (6.3 inches) high by 400 mm (15.7 inches) wide with a 15 mm (0.6 inches) black outer border. The identification number shall be displayed in 100 mm (3.9 inches) black Helvetica Medium numerals on the orange panel. Measurements may vary from those specified plus or minus 5 mm (0.2 inches). (2) The...

Analytic theory for the selection of 2-D needle crystal at arbitrary Peclet number

NASA Technical Reports Server (NTRS)

Tanveer, Saleh

1989-01-01

An accurate analytic theory is presented for the velocity selection of a two-dimensional needle crystal for arbitrary Peclet number for small values of the surface tension parameter. The velocity selection is caused by the effect of transcendentally small terms which are determined by analytic continuation to the complex plane and analysis of nonlinear equations. The work supports the general conclusion of previous small Peclet number analytical results of other investigators, though there are some discrepancies in details. It also addresses questions raised on the validity of selection theory owing to assumptions made on shape corrections at large distances from the tip.

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

24 CFR 201.6 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 201.6 Section 201.6 Housing and Urban Development... HOME LOANS General § 201.6 Disclosure and verification of Social Security and Employer Identification... the disclosure and verification of Social Security and Employer Identification Numbers, as provided by...

Counterfeit drugs: analytical techniques for their identification.

PubMed

Martino, R; Malet-Martino, M; Gilard, V; Balayssac, S

2010-09-01

In recent years, the number of counterfeit drugs has increased dramatically, including not only "lifestyle" products but also vital medicines. Besides the threat to public health, the financial and reputational damage to pharmaceutical companies is substantial. The lack of robust information on the prevalence of fake drugs is an obstacle in the fight against drug counterfeiting. It is generally accepted that approximately 10% of drugs worldwide could be counterfeit, but it is also well known that this number covers very different situations depending on the country, the places where the drugs are purchased, and the definition of what constitutes a counterfeit drug. The chemical analysis of drugs suspected to be fake is a crucial step as counterfeiters are becoming increasingly sophisticated, rendering visual inspection insufficient to distinguish the genuine products from the counterfeit ones. This article critically reviews the recent analytical methods employed to control the quality of drug formulations, using as an example artemisinin derivatives, medicines particularly targeted by counterfeiters. Indeed, a broad panel of techniques have been reported for their analysis, ranging from simple and cheap in-field ones (colorimetry and thin-layer chromatography) to more advanced laboratory methods (mass spectrometry, nuclear magnetic resonance, and vibrational spectroscopies) through chromatographic methods, which remain the most widely used. The conclusion section of the article highlights the questions to be posed before selecting the most appropriate analytical approach.

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

24 CFR 242.68 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 242.68 Section 242.68 Housing and Urban Development... Requirements § 242.68 Disclosure and verification of Social Security and Employer Identification Numbers. The requirements set forth in 24 CFR part 5, regarding the disclosure and verification of Social Security Numbers...

49 CFR 172.334 - Identification numbers; prohibited display.

Code of Federal Regulations, 2014 CFR

2014-10-01

... or 1.6, DANGEROUS, or subsidiary hazard placard. (b) No person may display an identification number on a placard, orange panel or white square-on-point display configuration unless— (1) The... the placard, orange panel or white square-on-point configuration authorized by § 172.332 or § 172.336...

49 CFR 172.334 - Identification numbers; prohibited display.

Code of Federal Regulations, 2012 CFR

2012-10-01

... or 1.6, DANGEROUS, or subsidiary hazard placard. (b) No person may display an identification number on a placard, orange panel or white square-on-point display configuration unless— (1) The... the placard, orange panel or white square-on-point configuration authorized by § 172.332 or § 172.336...

49 CFR 172.334 - Identification numbers; prohibited display.

Code of Federal Regulations, 2010 CFR

2010-10-01

... or 1.6, DANGEROUS, or subsidiary hazard placard. (b) No person may display an identification number on a placard, orange panel or white square-on-point display configuration unless— (1) The... the placard, orange panel or white square-on-point configuration authorized by § 172.332 or § 172.336...

49 CFR 172.334 - Identification numbers; prohibited display.

Code of Federal Regulations, 2011 CFR

2011-10-01

... or 1.6, DANGEROUS, or subsidiary hazard placard. (b) No person may display an identification number on a placard, orange panel or white square-on-point display configuration unless— (1) The... the placard, orange panel or white square-on-point configuration authorized by § 172.332 or § 172.336...

49 CFR 172.334 - Identification numbers; prohibited display.

Code of Federal Regulations, 2013 CFR

2013-10-01

... or 1.6, DANGEROUS, or subsidiary hazard placard. (b) No person may display an identification number on a placard, orange panel or white square-on-point display configuration unless— (1) The... the placard, orange panel or white square-on-point configuration authorized by § 172.332 or § 172.336...

49 CFR 172.336 - Identification numbers; special provisions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... accordance with § 172.542(c). (3) On cargo tanks They contain only fuel oil The cargo tank is marked “Fuel... petroleum distillate fuel The identification number for the liquid petroleum distillate fuel having the lowest flash point is displayed. If the cargo tank also contains gasoline and alcohol fuel blends...

49 CFR 172.336 - Identification numbers; special provisions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... fuels together with a gasoline and alcohol fuel blend containing more than ten percent ethanol, the... gasoline and alcohol fuel blend containing more than ten percent ethanol, the identification number “3475...). (3) On a cargo tank containing only fuel oil, if the cargo tank is marked “Fuel Oil” on each side and...

49 CFR 172.336 - Identification numbers; special provisions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... fuels together with a gasoline and alcohol fuel blend containing more than ten percent ethanol, the... gasoline and alcohol fuel blend containing more than ten percent ethanol, the identification number “3475...). (3) On a cargo tank containing only fuel oil, if the cargo tank is marked “Fuel Oil” on each side and...

49 CFR 172.336 - Identification numbers; special provisions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... fuels together with a gasoline and alcohol fuel blend containing more than ten percent ethanol, the... gasoline and alcohol fuel blend containing more than ten percent ethanol, the identification number “3475...). (3) On a cargo tank containing only fuel oil, if the cargo tank is marked “Fuel Oil” on each side and...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

24 CFR 206.40 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 206.40 Section 206.40 Housing and Urban Development... Eligibility; Endorsement Eligible Mortgagors § 206.40 Disclosure and verification of Social Security and... verification of Social Security and Employer Identification Numbers, as provided by part 200, subpart U, of...

24 CFR 241.626 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 241.626 Section 241.626 Housing and Urban... verification of Social Security and Employer Identification Numbers. To be eligible for loan insurance under this subpart, the borrower must meet the requirements for the disclosure and verification of Social...

The identification and analytical characterization of 2,2'-difluorofentanyl.

PubMed

Liu, Cuimei; Li, Tao; Han, Yu; Hua, Zhendong; Jia, Wei; Qian, Zhenhua

2018-04-01

New psychoactive substances (NPS) have expanded their distribution and become widely available in the global market in recent years. The illicit use of fentanyl and its analogs has become an important worldwide concern linked to their high potency and risk of fatal overdose. This study describes the analytical characterization of a new fentanyl derivative N-(1-(2-fluorophenethyl)-4-piperidinyl)-N-(2-fluorophenyl)propionamide (2,2'-difluorofentanyl). Identification was based on ultra-high-performance liquid chromatography-quadrupole time-of-flight-mass spectrometry (UHPLC-QTOF-MS), gas chromatography-mass spectrometry (GC-MS), Fourier transform infrared (FTIR) spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. To our knowledge, this study is the first to report on analytical data for this compound. The most abundant fragment ion in the electrospray ionization (ESI) mass spectrum under collision-induced dissociation (CID) mode was formed by the cleavage between the piperidine ring and the N-phenyl-amide moiety of the protonated molecule. Two diagnostic ions in the electron ionization (EI) mass spectrum were formed by the loss of a tropylium ion (M-91), and by the degradation of the piperidine ring and dissociate of the COC 2 H 5 moiety altogether, respectively. Copyright © 2017 John Wiley & Sons, Ltd.

Identifying Organizational Identification as a Basis for Attitudes and Behaviors: A Meta-Analytic Review.

PubMed

Lee, Eun-Suk; Park, Tae-Youn; Koo, Bonjin

2015-09-01

Organizational identification has been argued to have a unique value in explaining individual attitudes and behaviors in organizations, as it involves the essential definition of entities (i.e., individual and organizational identities). This review seeks meta-analytic evidence of the argument by examining how this identity-relevant construct functions in the nexus of attitudinal/behavioral constructs. The findings show that, first, organizational identification is significantly associated with key attitudes (job involvement, job satisfaction, and affective organizational commitment) and behaviors (in-role performance and extra-role performance) in organizations. Second, in the classic psychological model of attitude-behavior relations (Fishbein & Ajzen, 1975), organizational identification is positioned as a basis from which general sets of those attitudes and behaviors are engendered; organizational identification has a direct effect on general behavior above and beyond the effect of general attitude. Third, the effects of organizational identification are moderated by national culture, a higher-level social context wherein the organization is embedded, such that the effects are stronger in a collectivistic culture than in an individualistic culture. Theoretical and practical implications of the findings and future research directions are discussed. (c) 2015 APA, all rights reserved).

7 CFR 201.13 - Lot number or other identification.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Lot number or other identification. 201.13 Section 201.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling...

7 CFR 201.13 - Lot number or other identification.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Lot number or other identification. 201.13 Section 201.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling...

7 CFR 201.13 - Lot number or other identification.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Lot number or other identification. 201.13 Section 201.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling...

7 CFR 201.13 - Lot number or other identification.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Lot number or other identification. 201.13 Section 201.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling...

7 CFR 201.13 - Lot number or other identification.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Lot number or other identification. 201.13 Section 201.13 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) FEDERAL SEED ACT FEDERAL SEED ACT REGULATIONS Labeling...

26 CFR 31.6011(b)-1 - Employers' identification numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... any district director or director of a service center or any district office of the Social Security... applicable to Form SS-4, or with the nearest district office of the Social Security Administration. The... forms, regulations, and instructions. For provisions relating to the inclusion of identification numbers...

27 CFR 70.113 - Penalty for failure to supply taxpayer identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... supply taxpayer identification number. 70.113 Section 70.113 Alcohol, Tobacco Products and Firearms..., Additional Amounts, and Assessable Penalties § 70.113 Penalty for failure to supply taxpayer identification... notice and demand therefor. (b) Reasonable cause. If any person who is required by the regulations under...

Numerical and analytical approaches to an advection-diffusion problem at small Reynolds number and large Péclet number

NASA Astrophysics Data System (ADS)

Fuller, Nathaniel J.; Licata, Nicholas A.

2018-05-01

Obtaining a detailed understanding of the physical interactions between a cell and its environment often requires information about the flow of fluid surrounding the cell. Cells must be able to effectively absorb and discard material in order to survive. Strategies for nutrient acquisition and toxin disposal, which have been evolutionarily selected for their efficacy, should reflect knowledge of the physics underlying this mass transport problem. Motivated by these considerations, in this paper we discuss the results from an undergraduate research project on the advection-diffusion equation at small Reynolds number and large Péclet number. In particular, we consider the problem of mass transport for a Stokesian spherical swimmer. We approach the problem numerically and analytically through a rescaling of the concentration boundary layer. A biophysically motivated first-passage problem for the absorption of material by the swimming cell demonstrates quantitative agreement between the numerical and analytical approaches. We conclude by discussing the connections between our results and the design of smart toxin disposal systems.

Application of system identification to analytic rotor modeling from simulated and wind tunnel dynamic test data, part 2

NASA Technical Reports Server (NTRS)

Hohenemser, K. H.; Banerjee, D.

1977-01-01

An introduction to aircraft state and parameter identification methods is presented. A simplified form of the maximum likelihood method is selected to extract analytical aeroelastic rotor models from simulated and dynamic wind tunnel test results for accelerated cyclic pitch stirring excitation. The dynamic inflow characteristics for forward flight conditions from the blade flapping responses without direct inflow measurements were examined. The rotor blades are essentially rigid for inplane bending and for torsion within the frequency range of study, but flexible in out-of-plane bending. Reverse flow effects are considered for high rotor advance ratios. Two inflow models are studied; the first is based on an equivalent blade Lock number, the second is based on a time delayed momentum inflow. In addition to the inflow parameters, basic rotor parameters like the blade natural frequency and the actual blade Lock number are identified together with measurement bias values. The effect of the theoretical dynamic inflow on the rotor eigenvalues is evaluated.

Matched spectral filter based on reflection holograms for analyte identification.

PubMed

Cao, Liangcai; Gu, Claire

2009-12-20

A matched spectral filter set that provides automatic preliminary analyte identification is proposed and analyzed. Each matched spectral filter in the set containing the multiple spectral peaks corresponding to the Raman spectrum of a substance is capable of collecting the specified spectrum into the detector simultaneously. The filter set is implemented by multiplexed volume holographic reflection gratings. The fabrication of a matched spectral filter in an Fe:LiNbO(3) crystal is demonstrated to match the Raman spectrum of the sample Rhodamine 6G (R6G). An interference alignment method is proposed and used in the fabrication to ensure that the multiplexed gratings are in the same direction at a high angular accuracy of 0.0025 degrees . Diffused recording beams are used to control the bandwidth of the spectral peaks. The reflection spectrum of the filter is characterized using a modified Raman spectrometer. The result of the filter's reflection spectrum matches that of the sample R6G. A library of such matched spectral filters will facilitate a fast detection with a higher sensitivity and provide a capability for preliminary molecule identification.

27 CFR 25.169 - Application for employer identification number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Application for employer identification number. 25.169 Section 25.169 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Preparation and Remittance of Tax...

27 CFR 25.169 - Application for employer identification number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2012-04-01 2012-04-01 false Application for employer identification number. 25.169 Section 25.169 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Preparation and Remittance of Tax...

27 CFR 25.169 - Application for employer identification number.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2013-04-01 2013-04-01 false Application for employer identification number. 25.169 Section 25.169 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Preparation and Remittance of Tax...

27 CFR 25.169 - Application for employer identification number.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2014-04-01 2014-04-01 false Application for employer identification number. 25.169 Section 25.169 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY ALCOHOL BEER Tax on Beer Preparation and Remittance of Tax...

27 CFR 25.169 - Application for employer identification number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2011-04-01 2011-04-01 false Application for employer identification number. 25.169 Section 25.169 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Tax on Beer Preparation and Remittance of Tax...

[Projective identification, mimesis and the analytical situation. Preliminary observations].

PubMed

Ruberto, A; Lucchi, N; Senesi, P; Gaston, A

1990-01-01

In an attempt to underline the need to refer to an imaginary setting, in which the analytical relationship is acted out, the Authors have considered the possible relations between the concept of projective identification, as defined by Klein and further developed by Bion, and the idea of "Mimesis", which is inevitably involved in every story, and which confronts the imaginary at the very moment in which it is produced. The "fusion" between subject and object, which may occur in a more or less partial manner, is defined as a phenomenal demonstration of the participation of the two poles of the relationship in a "super-individual" experience which embraces them both. The mythical image of the hunter. Anyone is, in our opinion, a paradigmatic clement in this from of "meeting" which takes place within an impersonal and illusionary dimension.

Analytical minimization of synchronicity errors in stochastic identification

NASA Astrophysics Data System (ADS)

Bernal, D.

2018-01-01

An approach to minimize error due to synchronicity faults in stochastic system identification is presented. The scheme is based on shifting the time domain signals so the phases of the fundamental eigenvector estimated from the spectral density are zero. A threshold on the mean of the amplitude-weighted absolute value of these phases, above which signal shifting is deemed justified, is derived and found to be proportional to the first mode damping ratio. It is shown that synchronicity faults do not map precisely to phasor multiplications in subspace identification and that the accuracy of spectral density estimated eigenvectors, for inputs with arbitrary spectral density, decrease with increasing mode number. Selection of a corrective strategy based on signal alignment, instead of eigenvector adjustment using phasors, is shown to be the product of the foregoing observations. Simulations that include noise and non-classical damping suggest that the scheme can provide sufficient accuracy to be of practical value.

Jersey number detection in sports video for athlete identification

NASA Astrophysics Data System (ADS)

Ye, Qixiang; Huang, Qingming; Jiang, Shuqiang; Liu, Yang; Gao, Wen

2005-07-01

Athlete identification is important for sport video content analysis since users often care about the video clips with their preferred athletes. In this paper, we propose a method for athlete identification by combing the segmentation, tracking and recognition procedures into a coarse-to-fine scheme for jersey number (digital characters on sport shirt) detection. Firstly, image segmentation is employed to separate the jersey number regions with its background. And size/pipe-like attributes of digital characters are used to filter out candidates. Then, a K-NN (K nearest neighbor) classifier is employed to classify a candidate into a digit in "0-9" or negative. In the recognition procedure, we use the Zernike moment features, which are invariant to rotation and scale for digital shape recognition. Synthetic training samples with different fonts are used to represent the pattern of digital characters with non-rigid deformation. Once a character candidate is detected, a SSD (smallest square distance)-based tracking procedure is started. The recognition procedure is performed every several frames in the tracking process. After tracking tens of frames, the overall recognition results are combined to determine if a candidate is a true jersey number or not by a voting procedure. Experiments on several types of sports video shows encouraging result.

Performance characterization of material identification systems

NASA Astrophysics Data System (ADS)

Brown, Christopher D.; Green, Robert L.

2006-10-01

In recent years a number of analytical devices have been proposed and marketed specifically to enable field-based material identification. Technologies reliant on mass, near- and mid-infrared, and Raman spectroscopies are available today, and other platforms are imminent. These systems tend to perform material recognition based on an on-board library of material signatures. While figures of merit for traditional quantitative analytical sensors are broadly established (e.g., SNR, selectivity, sensitivity, limit of detection/decision), measures of performance for material identification systems have not been systematically discussed. In this paper we present an approach to performance characterization similar in spirit to ROC curves, but including elements of precision-recall curves and specialized for the intended-use of material identification systems. Important experimental considerations are discussed, including study design, sources of bias, uncertainty estimation, and cross-validation and the approach as a whole is illustrated using a commercially available handheld Raman material identification system.

Evaluation of trace analyte identification in complex matrices by low-resolution gas chromatography--Mass spectrometry through signal simulation.

PubMed

Bettencourt da Silva, Ricardo J N

2016-04-01

The identification of trace levels of compounds in complex matrices by conventional low-resolution gas chromatography hyphenated with mass spectrometry is based in the comparison of retention times and abundance ratios of characteristic mass spectrum fragments of analyte peaks from calibrators with sample peaks. Statistically sound criteria for the comparison of these parameters were developed based on the normal distribution of retention times and the simulation of possible non-normal distribution of correlated abundances ratios. The confidence level used to set the statistical maximum and minimum limits of parameters defines the true positive rates of identifications. The false positive rate of identification was estimated from worst-case signal noise models. The estimated true and false positive identifications rate from one retention time and two correlated ratios of three fragments abundances were combined using simple Bayes' statistics to estimate the probability of compound identification being correct designated examination uncertainty. Models of the variation of examination uncertainty with analyte quantity allowed the estimation of the Limit of Examination as the lowest quantity that produced "Extremely strong" evidences of compound presence. User friendly MS-Excel files are made available to allow the easy application of developed approach in routine and research laboratories. The developed approach was successfully applied to the identification of chlorpyrifos-methyl and malathion in QuEChERS method extracts of vegetables with high water content for which the estimated Limit of Examination is 0.14 mg kg(-1) and 0.23 mg kg(-1) respectively. Copyright © 2015 Elsevier B.V. All rights reserved.

Using countertransference: analytic contact, projective identification, and transference phantasy states.

PubMed

Waska, Robert

2008-01-01

The influence of projective identification is an integral aspect of most psychoanalytic treatments, not only with patients who are more disturbed, but also with individuals are higher functioning and have neuroses. Projective identification involves both internal relational phantasies of self and object as well as external interactions with the environment. Both elements shape the transference. Continuous projections distort the ego's image of the object, causing introjections that bring increased guilt, anxiety, and envy onto the ego, creating even more radical projections. Consequently, the countertransference is repeatedly stimulated in an evolving or devolving manner (Clarkin, Yeomans, Kernberg, 2006). The case material has illustrated the constant interplay among projective identification, transference, and countertransference as well as the utility of countertransference in making the most helpful interpretations. The concept of analytic contact (Waska, 2006; Waska 2007) was noted as the vehicle of optimal psychological transformation. Rather than an emphasis on frequency, diagnosis, use of couch, or mode of termination, the focus is more on the clinical situation and the moment-to-moment work on internal conflict, unconscious phantasy, destructive defenses, analysis of the transference and extratransference anxieties, and the gradual integration of core object relational experiences. Regarding a more clinical rather than theoretical definition of psychoanalysis, Sandler (1988) states that what truly defines a treatment as psychoanalytic is the analyst's attitudes towards his patient, his willingness to contain and make the effort to patiently understand the patient's unconscious conflicts and reactions to internal phantasy states, the humane detachment and lack of judgment, and the maintenance of a comfortable and safe setting in which the transference can unfold. This definition is certainly similar to the elements of analytic contact. Use of the

78 FR 15337 - IRS Truncated Taxpayer Identification Numbers; Hearing Cancellation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-11

... Service (IRS), Treasury. ACTION: Cancellation of a notice of public hearing on proposed rulemaking. SUMMARY: This document cancels a public hearing on proposed regulations under the Internal Revenue Code... IRS truncated taxpayer identification number, a TTIN. DATES: The public hearing, originally scheduled...

22 CFR 228.03 - Identification of principal geographic code numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Identification of principal geographic code numbers. 228.03 Section 228.03 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON SOURCE, ORIGIN AND NATIONALITY FOR COMMODITIES AND SERVICES FINANCED BY USAID Definitions and Scope of This Part...

[Patient identification errors and biological samples in the analytical process: Is it possible to improve patient safety?].

PubMed

Cuadrado-Cenzual, M A; García Briñón, M; de Gracia Hills, Y; González Estecha, M; Collado Yurrita, L; de Pedro Moro, J A; Fernández Pérez, C; Arroyo Fernández, M

2015-01-01

Patient identification errors and biological samples are one of the problems with the highest risk factor in causing an adverse event in the patient. To detect and analyse the causes of patient identification errors in analytical requests (PIEAR) from emergency departments, and to develop improvement strategies. A process and protocol was designed, to be followed by all professionals involved in the requesting and performing of laboratory tests. Evaluation and monitoring indicators of PIEAR were determined, before and after the implementation of these improvement measures (years 2010-2014). A total of 316 PIEAR were detected in a total of 483,254 emergency service requests during the study period, representing a mean of 6.80/10,000 requests. Patient identification failure was the most frequent in all the 6-monthly periods assessed, with a significant difference (P<.0001). The improvement strategies applied showed to be effective in detecting PIEAR, as well as the prevention of such errors. However, we must continue working with this strategy, promoting a culture of safety for all the professionals involved, and trying to achieve the goal that 100% of the analytical and samples are properly identified. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

24 CFR 884.117 - Disclosure and verification of Social Security and Employer Identification Numbers by owners.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers by owners. 884.117 Section 884.117 Housing and Urban... PROJECTS Applicability, Scope and Basic Policies § 884.117 Disclosure and verification of Social Security... Social Security and Employer Identification Numbers, as provided by 24 CFR part 5. (Approved by the...

Blind identification of the number of sub-carriers for orthogonal frequency division multiplexing-based elastic optical networking

NASA Astrophysics Data System (ADS)

Zhao, Lei; Xu, Hengying; Bai, Chenglin

2018-03-01

In orthogonal frequency division multiplexing (OFDM)-based elastic optical networking (EON), it is imperative to identify unknown parameters of OFDM-based EON signals quickly, intelligently and robustly. Because the number of sub-carriers determines the size of the sub-carriers spacing and then affects the symbol period of the OFDM and the anti-dispersion capability of the system, the identification of the number of sub-carriers has a profound effect on the identification of other key parameters of the system. In this paper, we proposed a method of number identification for sub-carriers of OFDM-based EON signals with help of high-order cyclic cumulant. The specific fourth-order cyclic cumulant exists only at the location of its sub-carriers frequencies. So the identification of the number of sub-carriers can be implemented by detecting the cyclic-frequencies. The proposed scheme in our study can be divided into three sub-stages, i.e. estimating the spectral range, calculating the high-order cyclic cumulant and identifying the number of sub-carriers. When the optical signal-to-noise ratios (OSNR) varied from 16dB to 22dB, the number of sub-carriers (64-512) was successfully identified in the experiment, and from the statistical point of view, the average identification absolute accuracy (IAAs) exceeded 94%.

Assigning unique identification numbers to new user accounts and groups in a computing environment with multiple registries

DOEpatents

DeRobertis, Christopher V.; Lu, Yantian T.

2010-02-23

A method, system, and program storage device for creating a new user account or user group with a unique identification number in a computing environment having multiple user registries is provided. In response to receiving a command to create a new user account or user group, an operating system of a clustered computing environment automatically checks multiple registries configured for the operating system to determine whether a candidate identification number for the new user account or user group has been assigned already to one or more existing user accounts or groups, respectively. The operating system automatically assigns the candidate identification number to the new user account or user group created in a target user registry if the checking indicates that the candidate identification number has not been assigned already to any of the existing user accounts or user groups, respectively.

Introjective identification: the analytic work of evocation.

PubMed

Eekhoff, Judy K

2016-12-01

This paper focuses on a particular counter-transference process-introjective identification and the evocation it enables. Introjective identification enables evocation because it engages the analyst's radical openness to the experience of the patient at the most primordial level. The accumulated wisdom of Ferenczi and those who followed him is used to discuss the role of introjective identification in the treatment of patients with non-neurotic structures.

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

24 CFR 5.218 - Penalties for failing to disclose and verify Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Penalties for failing to disclose and verify Social Security and Employer Identification Numbers. 5.218 Section 5.218 Housing and Urban....218 Penalties for failing to disclose and verify Social Security and Employer Identification Numbers...

[application of the analytical transmission electron microscopy techniques for detection, identification and visualization of localization of nanoparticles of titanium and cerium oxides in mammalian cells].

PubMed

Shebanova, A S; Bogdanov, A G; Ismagulova, T T; Feofanov, A V; Semenyuk, P I; Muronets, V I; Erokhina, M V; Onishchenko, G E; Kirpichnikov, M P; Shaitan, K V

2014-01-01

This work represents the results of the study on applicability of the modern methods of analytical transmission electron microscopy for detection, identification and visualization of localization of nanoparticles of titanium and cerium oxides in A549 cell, human lung adenocarcinoma cell line. A comparative analysis of images of the nanoparticles in the cells obtained in the bright field mode of transmission electron microscopy, under dark-field scanning transmission electron microscopy and high-angle annular dark field scanning transmission electron was performed. For identification of nanoparticles in the cells the analytical techniques, energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy, were compared when used in the mode of obtaining energy spectrum from different particles and element mapping. It was shown that the method for electron tomography is applicable to confirm that nanoparticles are localized in the sample but not coated by contamination. The possibilities and fields of utilizing different techniques for analytical transmission electron microscopy for detection, visualization and identification of nanoparticles in the biological samples are discussed.

A Robust Analytical Approach for the Identification of Specific Protein Carbonylation Sites: Metal-Catalyzed Oxidations of Human Serum Albumin

PubMed Central

Ugur, Zafer; Gronert, Scott

2017-01-01

The formation of protein carbonyls in the metal-catalyzed oxidation of human serum albumin (HSA) is characterized using a new analytical approach that involves tagging the modification site with multiple hydrazide reagents. Protein carbonyl formation at lysine and arginine residues was catalyzed with copper and iron ions, and the resulting oxidation patterns in HSA are contrasted. A total of 18 modification sites were identified with iron ion catalysis and 14 with copper ion catalysis. However, with the more stringent requirement of identification with at least two tagging reagents, the number of validated modification sites drops to 10 for iron and 9 for copper. Of the 14 total validated sites, there were only five in common for the two metal ions. The results illustrate the value of using multiple tagging agents and highlight the selective and specific nature of metal-catalyzed protein oxidations. PMID:28303033

Accurate identification of layer number for few-layer WS2 and WSe2 via spectroscopic study.

PubMed

Li, Yuanzheng; Li, Xinshu; Yu, Tong; Yang, Guochun; Chen, Heyu; Zhang, Cen; Feng, Qiushi; Ma, Jiangang; Liu, Weizhen; Xu, Haiyang; Liu, Yichun; Liu, Xinfeng

2018-03-23

Transition metal dichalcogenides (TMDs) with a typical layered structure are highly sensitive to their layer number in optical and electronic properties. Seeking a simple and effective method for layer number identification is very important to low-dimensional TMD samples. Herein, a rapid and accurate layer number identification of few-layer WS 2 and WSe 2 is proposed via locking their photoluminescence (PL) peak-positions. As the layer number of WS 2 /WSe 2 increases, it is found that indirect transition emission is more thickness-sensitive than direct transition emission, and the PL peak-position differences between the indirect and direct transitions can be regarded as fingerprints to identify their layer number. Theoretical calculation confirms that the notable thickness-sensitivity of indirect transition derives from the variations of electron density of states of W atom d-orbitals and chalcogen atom p-orbitals. Besides, the PL peak-position differences between the indirect and direct transitions are almost independent of different insulating substrates. This work not only proposes a new method for layer number identification via PL studies, but also provides a valuable insight into the thickness-dependent optical and electronic properties of W-based TMDs.

MALDI based identification of soybean protein markers--possible analytical targets for allergen detection in processed foods.

PubMed

Cucu, Tatiana; De Meulenaer, Bruno; Devreese, Bart

2012-02-01

Soybean (Glycine max) is extensively used all over the world due to its nutritional qualities. However, soybean is included in the "big eight" list of food allergens. According to the EU directive 2007/68/EC, food products containing soybeans have to be labeled in order to protect the allergic consumers. Nevertheless, soybeans can still inadvertently be present in food products. The development of analytical methods for the detection of traces of allergens is important for the protection of allergic consumers. Mass spectrometry of marker proteolytical fragments of protein allergens is growingly recognized as a detection method in food control. However, quantification of soybean at the peptide level is hindered due to limited information regarding specific stable markers derived after proteolytic digestion. The aim of this study was to use MALDI-TOF/MS and MS/MS as a fast screening tool for the identification of stable soybean derived tryptic markers which were still identifiable even if the proteins were subjected to various changes at the molecular level through a number of reactions typically occurring during food processing (denaturation, the Maillard reaction and oxidation). The peptides (401)Val-Arg(410) from the G1 glycinin (Gly m 6) and the (518)Gln-Arg(528) from the α' chain of the β-conglycinin (Gly m 5) proved to be the most stable. These peptides hold potential to be used as targets for the development of new analytical methods for the detection of soybean protein traces in processed foods. Copyright © 2011 Elsevier Inc. All rights reserved.

Analytic materials

PubMed Central

2016-01-01

The theory of inhomogeneous analytic materials is developed. These are materials where the coefficients entering the equations involve analytic functions. Three types of analytic materials are identified. The first two types involve an integer p. If p takes its maximum value, then we have a complete analytic material. Otherwise, it is incomplete analytic material of rank p. For two-dimensional materials, further progress can be made in the identification of analytic materials by using the well-known fact that a 90° rotation applied to a divergence-free field in a simply connected domain yields a curl-free field, and this can then be expressed as the gradient of a potential. Other exact results for the fields in inhomogeneous media are reviewed. Also reviewed is the subject of metamaterials, as these materials provide a way of realizing desirable coefficients in the equations. PMID:27956882

The identification of van Hiele level students on the topic of space analytic geometry

NASA Astrophysics Data System (ADS)

Yudianto, E.; Sunardi; Sugiarti, T.; Susanto; Suharto; Trapsilasiwi, D.

2018-03-01

Geometry topics are still considered difficult by most students. Therefore, this study focused on the identification of students related to van Hiele levels. The task used from result of the development of questions related to analytical geometry of space. The results of the work involving 78 students who worked on these questions covered 11.54% (nine students) classified on a visual level; 5.13% (four students) on analysis level; 1.28% (one student) on informal deduction level; 2.56% (two students) on deduction and 2.56% (two students) on rigor level, and 76.93% (sixty students) classified on the pre-visualization level.

47 CFR 3.22 - Number of accounting authority identification codes per applicant.

Code of Federal Regulations, 2010 CFR

2010-10-01

... AUTHORIZATION AND ADMINISTRATION OF ACCOUNTING AUTHORITIES IN MARITIME AND MARITIME MOBILE-SATELLITE RADIO SERVICES Application Procedures § 3.22 Number of accounting authority identification codes per applicant... assign U.S. AAICs for entities settling accounts of U.S. licensed vessels in the maritime mobile and...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2011 CFR

2011-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2010 CFR

2010-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2012 CFR

2012-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2014 CFR

2014-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

31 CFR 256.13 - Are agencies required to supply a taxpayer identification number (TIN) when submitting a request...

Code of Federal Regulations, 2013 CFR

2013-07-01

... taxpayer identification number (TIN) when submitting a request for payment? 256.13 Section 256.13 Money and... BILLS Requesting Payments § 256.13 Are agencies required to supply a taxpayer identification number (TIN) when submitting a request for payment? Yes, agencies must include a valid TIN on all requests for...

45 CFR 153.720 - Establishment and usage of masked enrollee identification numbers.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 45 Public Welfare 1 2014-10-01 2014-10-01 false Establishment and usage of masked enrollee identification numbers. 153.720 Section 153.720 Public Welfare Department of Health and Human Services REQUIREMENTS RELATING TO HEALTH CARE ACCESS STANDARDS RELATED TO REINSURANCE, RISK CORRIDORS, AND RISK...

45 CFR 153.720 - Establishment and usage of masked enrollee identification numbers.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 45 Public Welfare 1 2013-10-01 2013-10-01 false Establishment and usage of masked enrollee identification numbers. 153.720 Section 153.720 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH CARE ACCESS STANDARDS RELATED TO REINSURANCE, RISK CORRIDORS, AND RISK...

De-Identification in Learning Analytics

ERIC Educational Resources Information Center

Khalila, Mohammad; Ebner, Martin

2016-01-01

Learning analytics has reserved its position as an important field in the educational sector. However, the large-scale collection, processing, and analyzing of data has steered the wheel beyond the borders to face an abundance of ethical breaches and constraints. Revealing learners' personal information and attitudes, as well as their activities,…

An analytical approach to the forensic identification of different classes of new psychoactive substances (NPSs) in seized materials.

PubMed

Strano Rossi, Sabina; Odoardi, Sara; Gregori, Adolfo; Peluso, Giuseppe; Ripani, Luigi; Ortar, Giorgio; Serpelloni, Giovanni; Romolo, Francesco Saverio

2014-09-15

New psychoactive substances (NPSs) are rapidly spreading worldwide, and forensic laboratories are often requested to identify new substances for which no reference standards or analytical data are available. This article describes an analytical approach that was adopted in Italy by a few collaborative centres of the Italian Early Warning System for Drugs, which has contributed many alerts for the identification of different classes of NPSs in the last 24 months. Seized crystals and powders were initially analysed via single quadrupole gas chromatography/mass spectrometry (GC/MS), followed by liquid chromatography/high-resolution mass spectrometry (LC/HRMS) in the positive electrospray ionisation (ESI) mode at 100,000 full width at half maximum resolution (FWHM) without fragmentation to elucidate the elemental compositions of unknown molecules. Different fragmentation voltages during LC/HRMS were applied to study the accurate masses of the obtained characteristic fragments. Nuclear magnetic resonance (NMR) analyses were performed to identify specific isomers when necessary. Some interesting examples of unknown NPSs from seizures later identified in our laboratories are reported, with special focus on those cases where analytical standards were not available during analyses. These cases include cathinones, such as 3-methylmethcathinone (3-MMC), methylone, bk-MBDB (butylone), 4-methylethcathinone (4-MEC), flephedrone, methylenedioxypyrovalerone (MDPV) and pentedrone, methoxetamine, apinaca or AKB48, benzydamine, meta-chlorophenylpiperazine (m-CPP), 5-MeO-N,N-dialkyl tryptamines, such as 5-MeO-DALT and 5-MeOMIPT, benzofurans, such as 6-APB and 4-APB, and diphenidine (identified for the first time in Europe). The identification of NPSs in confiscated materials was successfully achieved via GC/MS coupled with LC/HRMS and, in a few cases, NMR analyses. The availability of GC/MS libraries is of great assistance in the identification of new drugs. Alternatively, the study

Explicit analytical expression for the condition number of polynomials in power form

NASA Astrophysics Data System (ADS)

Rack, Heinz-Joachim

2017-07-01

In his influential papers [1-3] W. Gautschi has defined and reshaped the condition number κ∞ of polynomials Pn of degree ≤ n which are represented in power form on a zero-symmetric interval [-ω, ω]. Basically, κ∞ is expressed as the product of two operator norms: an explicit factor times an implicit one (the l∞-norm of the coefficient vector of the n-th Chebyshev polynomial of the first kind relative to [-ω, ω]). We provide a new proof, economize the second factor and express it by an explicit analytical formula.

77 FR 51782 - Federal Acquisition Regulation; Information Collection; Taxpayer Identification Number Information

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-27

... agency is required to furnish its Tax Identification Number (TIN) to that agency. 31 U.S.C. 3325(d... and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher... other information, its TIN. The TIN may be used by the Government to collect and report on any...

Semi-automated De-identification of German Content Sensitive Reports for Big Data Analytics.

PubMed

Seuss, Hannes; Dankerl, Peter; Ihle, Matthias; Grandjean, Andrea; Hammon, Rebecca; Kaestle, Nicola; Fasching, Peter A; Maier, Christian; Christoph, Jan; Sedlmayr, Martin; Uder, Michael; Cavallaro, Alexander; Hammon, Matthias

2017-07-01

reports enables reliable detection and labeling of sensitive data in different types of medical reports. Key Points:   · Collaborations between different institutions require de-identification of patients' data. · Software-based de-identification of content-sensitive reports grows in importance as a result of 'Big data'. · A de-identification software was developed and tested natively and after training. · The proposed de-identification software worked quite reliably, following training with roughly 100 edited reports. · A final check of the texts by an authorized person remains necessary. Citation Format · Seuss H, Dankerl P, Ihle M et al. Semi-automated De-identification of German Content Sensitive Reports for Big Data Analytics. Fortschr Röntgenstr 2017; 189: 661 - 671. © Georg Thieme Verlag KG Stuttgart · New York.

Extending birthday paradox theory to estimate the number of tags in RFID systems.

PubMed

Shakiba, Masoud; Singh, Mandeep Jit; Sundararajan, Elankovan; Zavvari, Azam; Islam, Mohammad Tariqul

2014-01-01

The main objective of Radio Frequency Identification systems is to provide fast identification for tagged objects. However, there is always a chance of collision, when tags transmit their data to the reader simultaneously. Collision is a time-consuming event that reduces the performance of RFID systems. Consequently, several anti-collision algorithms have been proposed in the literature. Dynamic Framed Slotted ALOHA (DFSA) is one of the most popular of these algorithms. DFSA dynamically modifies the frame size based on the number of tags. Since the real number of tags is unknown, it needs to be estimated. Therefore, an accurate tag estimation method has an important role in increasing the efficiency and overall performance of the tag identification process. In this paper, we propose a novel estimation technique for DFSA anti-collision algorithms that applies birthday paradox theory to estimate the number of tags accurately. The analytical discussion and simulation results prove that the proposed method increases the accuracy of tag estimation and, consequently, outperforms previous schemes.

Identification of Microorganisms by Modern Analytical Techniques.

PubMed

Buszewski, Bogusław; Rogowska, Agnieszka; Pomastowski, Paweł; Złoch, Michał; Railean-Plugaru, Viorica

2017-11-01

Rapid detection and identification of microorganisms is a challenging and important aspect in a wide range of fields, from medical to industrial, affecting human lives. Unfortunately, classical methods of microorganism identification are based on time-consuming and labor-intensive approaches. Screening techniques require the rapid and cheap grouping of bacterial isolates; however, modern bioanalytics demand comprehensive bacterial studies at a molecular level. Modern approaches for the rapid identification of bacteria use molecular techniques, such as 16S ribosomal RNA gene sequencing based on polymerase chain reaction or electromigration, especially capillary zone electrophoresis and capillary isoelectric focusing. However, there are still several challenges with the analysis of microbial complexes using electromigration technology, such as uncontrolled aggregation and/or adhesion to the capillary surface. Thus, an approach using capillary electrophoresis of microbial aggregates with UV and matrix-assisted laser desorption ionization time-of-flight MS detection is presented.

Fast transient analysis and first-stage collision-induced dissociation with the flowing atmospheric-pressure afterglow ionization source to improve analyte detection and identification.

PubMed

Shelley, Jacob T; Hieftje, Gary M

2010-04-01

The recent development of ambient desorption/ionization mass spectrometry (ADI-MS) has enabled fast, simple analysis of many different sample types. The ADI-MS sources have numerous advantages, including little or no required sample pre-treatment, simple mass spectra, and direct analysis of solids and liquids. However, problems of competitive ionization and limited fragmentation require sample-constituent separation, high mass accuracy, and/or tandem mass spectrometry (MS/MS) to detect, identify, and quantify unknown analytes. To maintain the inherent high throughput of ADI-MS, it is essential for the ion source/mass analyzer combination to measure fast transient signals and provide structural information. In the current study, the flowing atmospheric-pressure afterglow (FAPA) ionization source is coupled with a time-of-flight mass spectrometer (TOF-MS) to analyze fast transient signals (<500 ms FWHM). It was found that gas chromatography (GC) coupled with the FAPA source resulted in a reproducible (<5% RSD) and sensitive (detection limits of <6 fmol for a mixture of herbicides) system with analysis times of ca. 5 min. Introducing analytes to the FAPA in a transient was also shown to significantly reduce matrix effects caused by competitive ionization by minimizing the number and amount of constituents introduced into the ionization source. Additionally, MS/MS with FAPA-TOF-MS, enabling analyte identification, was performed via first-stage collision-induced dissociation (CID). Lastly, molecular and structural information was obtained across a fast transient peak by modulating the conditions that caused the first-stage CID.

Visual analytics of brain networks.

PubMed

Li, Kaiming; Guo, Lei; Faraco, Carlos; Zhu, Dajiang; Chen, Hanbo; Yuan, Yixuan; Lv, Jinglei; Deng, Fan; Jiang, Xi; Zhang, Tuo; Hu, Xintao; Zhang, Degang; Miller, L Stephen; Liu, Tianming

2012-05-15

Identification of regions of interest (ROIs) is a fundamental issue in brain network construction and analysis. Recent studies demonstrate that multimodal neuroimaging approaches and joint analysis strategies are crucial for accurate, reliable and individualized identification of brain ROIs. In this paper, we present a novel approach of visual analytics and its open-source software for ROI definition and brain network construction. By combining neuroscience knowledge and computational intelligence capabilities, visual analytics can generate accurate, reliable and individualized ROIs for brain networks via joint modeling of multimodal neuroimaging data and an intuitive and real-time visual analytics interface. Furthermore, it can be used as a functional ROI optimization and prediction solution when fMRI data is unavailable or inadequate. We have applied this approach to an operation span working memory fMRI/DTI dataset, a schizophrenia DTI/resting state fMRI (R-fMRI) dataset, and a mild cognitive impairment DTI/R-fMRI dataset, in order to demonstrate the effectiveness of visual analytics. Our experimental results are encouraging. Copyright © 2012 Elsevier Inc. All rights reserved.

Analytic tests and their relation to jet fuel thermal stability

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heneghan, S.P.; Kauffman, R.E.

1995-05-01

The evaluation of jet fuel thermal stability (TS) by simple analytic procedures has long been a goal of fuels chemists. The reason is obvious: if the analytic chemist can determine which types of material cause his test to respond, the refiners will know which materials to remove to improve stability. Complicating this quest is the lack of an acceptable quantitative TS test with which to compare any analytic procedures. To circumvent this problem, we recently compiled the results of TS tests for 12 fuels using six separate test procedures. The results covering a range of flow and temperature conditions showmore » that TS is not as dependent on test conditions as previously thought. Also, comparing the results from these tests with several analytic procedures shows that either a measure of the number of phenols or the total sulfur present in jet fuels is strongly indicative of the TS. The phenols have been measured using a cyclic voltammetry technique and the polar material by gas chromatography (atomic emission detection) following a solid phase extraction on silica gel. The polar material has been identified as mainly phenols (by mass spectrometry identification). Measures of the total acid number or peroxide concentration have little correlation with TS.« less

Air pollution source identification

NASA Technical Reports Server (NTRS)

Fordyce, J. S.

1975-01-01

The techniques available for source identification are reviewed: remote sensing, injected tracers, and pollutants themselves as tracers. The use of the large number of trace elements in the ambient airborne particulate matter as a practical means of identifying sources is discussed. Trace constituents are determined by sensitive, inexpensive, nondestructive, multielement analytical methods such as instrumental neutron activation and charged particle X-ray fluorescence. The application to a large data set of pairwise correlation, the more advanced pattern recognition-cluster analysis approach with and without training sets, enrichment factors, and pollutant concentration rose displays for each element is described. It is shown that elemental constituents are related to specific source types: earth crustal, automotive, metallurgical, and more specific industries. A field-ready source identification system based on time and wind direction resolved sampling is described.

NHEXAS PHASE I MARYLAND STUDY--STANDARD OPERATING PROCEDURE FOR IDENTIFICATION NUMBERS FOR SAMPLES AND FORMS (G03)

EPA Science Inventory

The purpose of this SOP is to indicate the proper method for assigning unique Identification Numbers for all samples taken and forms used in the collection of NHEXAS Pilot Studies. All data tracking procedures were built upon these ID numbers. Inspection of these ID numbers pro...

VALIDATION OF STANDARD ANALYTICAL PROTOCOL FOR ...

EPA Pesticide Factsheets

There is a growing concern with the potential for terrorist use of chemical weapons to cause civilian harm. In the event of an actual or suspected outdoor release of chemically hazardous material in a large area, the extent of contamination must be determined. This requires a system with the ability to prepare and quickly analyze a large number of contaminated samples for the traditional chemical agents, as well as numerous toxic industrial chemicals. Liquid samples (both aqueous and organic), solid samples (e.g., soil), vapor samples (e.g., air) and mixed state samples, all ranging from household items to deceased animals, may require some level of analyses. To meet this challenge, the U.S. Environmental Protection Agency (U.S. EPA) National Homeland Security Research Center, in collaboration with experts from across U.S. EPA and other Federal Agencies, initiated an effort to identify analytical methods for the chemical and biological agents that could be used to respond to a terrorist attack or a homeland security incident. U.S. EPA began development of standard analytical protocols (SAPs) for laboratory identification and measurement of target agents in case of a contamination threat. These methods will be used to help assist in the identification of existing contamination, the effectiveness of decontamination, as well as clearance for the affected population to reoccupy previously contaminated areas. One of the first SAPs developed was for the determin

78 FR 18343 - Federal Acquisition Regulation; Submission for OMB Review; Taxpayer Identification Number...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-26

... agency is required to furnish its Tax Identification Number (TIN) to that agency. 31 U.S.C. 3325(d... and submitted to a disbursing official, the TIN of the contractor receiving payment under the voucher... other information, its TIN. The TIN may be used by the Government to collect and report on any...

24 CFR 203.35 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Social Security and Employer Identification Numbers. 203.35 Section 203.35 Housing and Urban Development... Requirements and Underwriting Procedures Eligible Mortgagors § 203.35 Disclosure and verification of Social... mortgagor must meet the requirements for the disclosure and verification of Social Security and Employer...

24 CFR 203.35 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Social Security and Employer Identification Numbers. 203.35 Section 203.35 Housing and Urban Development... Requirements and Underwriting Procedures Eligible Mortgagors § 203.35 Disclosure and verification of Social... mortgagor must meet the requirements for the disclosure and verification of Social Security and Employer...

24 CFR 203.35 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Social Security and Employer Identification Numbers. 203.35 Section 203.35 Housing and Urban Development... Requirements and Underwriting Procedures Eligible Mortgagors § 203.35 Disclosure and verification of Social... mortgagor must meet the requirements for the disclosure and verification of Social Security and Employer...

24 CFR 203.35 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Social Security and Employer Identification Numbers. 203.35 Section 203.35 Housing and Urban Development... Requirements and Underwriting Procedures Eligible Mortgagors § 203.35 Disclosure and verification of Social... mortgagor must meet the requirements for the disclosure and verification of Social Security and Employer...

24 CFR 203.35 - Disclosure and verification of Social Security and Employer Identification Numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Social Security and Employer Identification Numbers. 203.35 Section 203.35 Housing and Urban Development... Requirements and Underwriting Procedures Eligible Mortgagors § 203.35 Disclosure and verification of Social... mortgagor must meet the requirements for the disclosure and verification of Social Security and Employer...

Framework for behavioral analytics in anomaly identification

NASA Astrophysics Data System (ADS)

Touma, Maroun; Bertino, Elisa; Rivera, Brian; Verma, Dinesh; Calo, Seraphin

2017-05-01

Behavioral Analytics (BA) relies on digital breadcrumbs to build user profiles and create clusters of entities that exhibit a large degree of similarity. The prevailing assumption is that an entity will assimilate the group behavior of the cluster it belongs to. Our understanding of BA and its application in different domains continues to evolve and is a direct result of the growing interest in Machine Learning research. When trying to detect security threats, we use BA techniques to identify anomalies, defined in this paper as deviation from the group behavior. Early research papers in this field reveal a high number of false positives where a security alert is triggered based on deviation from the cluster learned behavior but still within the norm of what the system defines as an acceptable behavior. Further, domain specific security policies tend to be narrow and inadequately represent what an entity can do. Hence, they: a) limit the amount of useful data during the learning phase; and, b) lead to violation of policy during the execution phase. In this paper, we propose a framework for future research on the role of policies and behavior security in a coalition setting with emphasis on anomaly detection and individual's deviation from group activities.

Extending Birthday Paradox Theory to Estimate the Number of Tags in RFID Systems

PubMed Central

Shakiba, Masoud; Singh, Mandeep Jit; Sundararajan, Elankovan; Zavvari, Azam; Islam, Mohammad Tariqul

2014-01-01

The main objective of Radio Frequency Identification systems is to provide fast identification for tagged objects. However, there is always a chance of collision, when tags transmit their data to the reader simultaneously. Collision is a time-consuming event that reduces the performance of RFID systems. Consequently, several anti-collision algorithms have been proposed in the literature. Dynamic Framed Slotted ALOHA (DFSA) is one of the most popular of these algorithms. DFSA dynamically modifies the frame size based on the number of tags. Since the real number of tags is unknown, it needs to be estimated. Therefore, an accurate tag estimation method has an important role in increasing the efficiency and overall performance of the tag identification process. In this paper, we propose a novel estimation technique for DFSA anti-collision algorithms that applies birthday paradox theory to estimate the number of tags accurately. The analytical discussion and simulation results prove that the proposed method increases the accuracy of tag estimation and, consequently, outperforms previous schemes. PMID:24752285

Identification of Copy Number Aberrations in Breast Cancer Subtypes Using Persistence Topology

PubMed Central

Arsuaga, Javier; Borrman, Tyler; Cavalcante, Raymond; Gonzalez, Georgina; Park, Catherine

2015-01-01

DNA copy number aberrations (CNAs) are of biological and medical interest because they help identify regulatory mechanisms underlying tumor initiation and evolution. Identification of tumor-driving CNAs (driver CNAs) however remains a challenging task, because they are frequently hidden by CNAs that are the product of random events that take place during tumor evolution. Experimental detection of CNAs is commonly accomplished through array comparative genomic hybridization (aCGH) assays followed by supervised and/or unsupervised statistical methods that combine the segmented profiles of all patients to identify driver CNAs. Here, we extend a previously-presented supervised algorithm for the identification of CNAs that is based on a topological representation of the data. Our method associates a two-dimensional (2D) point cloud with each aCGH profile and generates a sequence of simplicial complexes, mathematical objects that generalize the concept of a graph. This representation of the data permits segmenting the data at different resolutions and identifying CNAs by interrogating the topological properties of these simplicial complexes. We tested our approach on a published dataset with the goal of identifying specific breast cancer CNAs associated with specific molecular subtypes. Identification of CNAs associated with each subtype was performed by analyzing each subtype separately from the others and by taking the rest of the subtypes as the control. Our results found a new amplification in 11q at the location of the progesterone receptor in the Luminal A subtype. Aberrations in the Luminal B subtype were found only upon removal of the basal-like subtype from the control set. Under those conditions, all regions found in the original publication, except for 17q, were confirmed; all aberrations, except those in chromosome arms 8q and 12q were confirmed in the basal-like subtype. These two chromosome arms, however, were detected only upon removal of three patients

Identification and analytical characterization of four synthetic cathinone derivatives iso-4-BMC, β-TH-naphyrone, mexedrone, and 4-MDMC.

PubMed

Qian, Zhenhua; Jia, Wei; Li, Tao; Liu, Cuimei; Hua, Zhendong

2017-02-01

New psychoactive substances (NPS) have gained much popularity on the global market over the last number of years. The synthetic cathinone family is one of the most prominent groups and this paper reports on the analytical properties of four synthetic cathinone derivatives: (1) 1-(4-bromophenyl)-1-(methylamino)propan-2-one (iso-4-BMC or iso-brephedrone), (2) 2-(pyrrolidin-1-yl)-1-(5,6,7,8-tetrahydronaphthalen-2-yl)pentan-1-one (β-TH-naphyrone), (3) 3-methoxy-2-(methylamino)-1-(4-methylphenyl)propan-1-one (mexedrone), and (4) 2-(dimethylamino)-1-(4-methylphenyl)propan-1-one (4-MDMC). These identifications were based on liquid chromatography-quadrupole time-of-flight-mass spectrometry (LC-QTOF-MS), gas chromatography-mass spectrometry (GC-MS) and nuclear magnetic resonance (NMR) spectroscopy. To our knowledge, no chemical or pharmacological data about compounds 1-3 have appeared until now, making this the first report on these compounds. The Raman and GC-MS data of 4 have been reported, but this study added the LC-MS and NMR data for additional characterization. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Extraction of spatiotemporal response information from sorption-based cross-reactive sensor arrays for the identification and quantification of analyte mixtures

NASA Astrophysics Data System (ADS)

Woodka, Marc D.; Brunschwig, Bruce S.; Lewis, Nathan S.

2008-03-01

Linear sensor arrays made from small molecule/carbon black composite chemiresistors placed in a low headspace volume chamber, with vapor delivered at low flow rates, allowed for the extraction of chemical information that significantly increased the ability of the sensor arrays to identify vapor mixture components and to quantify their concentrations. Each sensor sorbed vapors from the gas stream to various degrees. Similar to gas chromatography, species having high vapor pressures were separated from species having low vapor pressures. Instead of producing typical sensor responses representative of thermodynamic equilibrium between each sensor and an unchanging vapor phase, sensor responses varied depending on the position of the sensor in the chamber and the time from the beginning of the analyte exposure. This spatiotemporal (ST) array response provided information that was a function of time as well as of the position of the sensor in the chamber. The responses to pure analytes and to multi-component analyte mixtures comprised of hexane, decane, ethyl acetate, chlorobenzene, ethanol, and/or butanol, were recorded along each of the sensor arrays. Use of a non-negative least squares (NNLS) method for analysis of the ST data enabled the correct identification and quantification of the composition of 2-, 3-, 4- and 5-component mixtures from arrays using only 4 chemically different sorbent films and sensor training on pure vapors only. In contrast, when traditional time- and position-independent sensor response information was used, significant errors in mixture identification were observed. The ability to correctly identify and quantify constituent components of vapor mixtures through the use of such ST information significantly expands the capabilities of such broadly cross-reactive arrays of sensors.

Predictive Analytics for Identification of Patients at Risk for QT Interval Prolongation - A Systematic Review.

PubMed

Tomaselli Muensterman, Elena; Tisdale, James E

2018-06-08

Prolongation of the heart rate-corrected QT (QTc) interval increases the risk for torsades de pointes (TdP), a potentially fatal arrhythmia. The likelihood of TdP is higher in patients with risk factors, which include female sex, older age, heart failure with reduced ejection fraction, hypokalemia, hypomagnesemia, concomitant administration of ≥ 2 QTc interval-prolonging medications, among others. Assessment and quantification of risk factors may facilitate prediction of patients at highest risk for developing QTc interval prolongation and TdP. Investigators have utilized the field of predictive analytics, which generates predictions using techniques including data mining, modeling, machine learning, and others, to develop methods of risk quantification and prediction of QTc interval prolongation. Predictive analytics have also been incorporated into clinical decision support (CDS) tools to alert clinicians regarding patients at increased risk of developing QTc interval prolongation. The objectives of this paper are to assess the effectiveness of predictive analytics for identification of patients at risk of drug-induced QTc interval prolongation, and to discuss the efficacy of incorporation of predictive analytics into CDS tools in clinical practice. A systematic review of English language articles (human subjects only) was performed, yielding 57 articles, with an additional 4 articles identified from other sources; a total of 10 articles were included in this review. Risk scores for QTc interval prolongation have been developed in various patient populations including those in cardiac intensive care units (ICUs) and in broader populations of hospitalized or health system patients. One group developed a risk score that includes information regarding genetic polymorphisms; this score significantly predicted TdP. Development of QTc interval prolongation risk prediction models and incorporation of these models into CDS tools reduces the risk of QTc interval

Separation of very hydrophobic analytes by micellar electrokinetic chromatography IV. Modeling of the effective electrophoretic mobility from carbon number equivalents and octanol-water partition coefficients.

PubMed

Huhn, Carolin; Pyell, Ute

2008-07-11

It is investigated whether those relationships derived within an optimization scheme developed previously to optimize separations in micellar electrokinetic chromatography can be used to model effective electrophoretic mobilities of analytes strongly differing in their properties (polarity and type of interaction with the pseudostationary phase). The modeling is based on two parameter sets: (i) carbon number equivalents or octanol-water partition coefficients as analyte descriptors and (ii) four coefficients describing properties of the separation electrolyte (based on retention data for a homologous series of alkyl phenyl ketones used as reference analytes). The applicability of the proposed model is validated comparing experimental and calculated effective electrophoretic mobilities. The results demonstrate that the model can effectively be used to predict effective electrophoretic mobilities of neutral analytes from the determined carbon number equivalents or from octanol-water partition coefficients provided that the solvation parameters of the analytes of interest are similar to those of the reference analytes.

Analytical advances in pharmaceutical impurity profiling.

PubMed

Holm, René; Elder, David P

2016-05-25

Impurities will be present in all drug substances and drug products, i.e. nothing is 100% pure if one looks in enough depth. The current regulatory guidance on impurities accepts this, and for drug products with a dose of less than 2g/day identification of impurities is set at 0.1% levels and above (ICH Q3B(R2), 2006). For some impurities, this is a simple undertaking as generally available analytical techniques can address the prevailing analytical challenges; whereas, for others this may be much more challenging requiring more sophisticated analytical approaches. The present review provides an insight into current development of analytical techniques to investigate and quantify impurities in drug substances and drug products providing discussion of progress particular within the field of chromatography to ensure separation of and quantification of those related impurities. Further, a section is devoted to the identification of classical impurities, but in addition, inorganic (metal residues) and solid state impurities are also discussed. Risk control strategies for pharmaceutical impurities aligned with several of the ICH guidelines, are also discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

Greater number of group identifications is associated with healthier behaviour: Evidence from a Scottish community sample.

PubMed

Sani, Fabio; Madhok, Vishnu; Norbury, Michael; Dugard, Pat; Wakefield, Juliet R H

2015-09-01

This paper investigates the interplay between group identification (i.e., the extent to which one has a sense of belonging to a social group, coupled with a sense of commonality with in-group members) and four types of health behaviour, namely physical exercise, smoking, drinking, and diet. Specifically, we propose a positive relationship between one's number of group identifications and healthy behaviour. This study is based on the Scottish portion of the data obtained for Wave 1 of the two-wave cross-national Health in Groups project. Totally 1,824 patients from five Scottish general practitioner (GP) surgeries completed the Wave 1 questionnaire in their homes. Participants completed measures of group identification, group contact, health behaviours, and demographic variables. Results demonstrate that the greater the number of social groups with which one identifies, the healthier one's behaviour on any of the four health dimensions considered. We believe our results are due to the fact that group identification will generally (1) enhance one's sense of meaning in life, thereby leading one to take more care of oneself, (2) increase one's sense of responsibility towards other in-group members, thereby enhancing one's motivation to be healthy in order to fulfil those responsibilities, and (3) increase compliance with healthy group behavioural norms. Taken together, these processes amply overcompensate for the fact that some groups with which people may identify can actually prescribe unhealthy behaviours. © 2014 The British Psychological Society.

Parameter identification of hyperelastic material properties of the heel pad based on an analytical contact mechanics model of a spherical indentation.

PubMed

Suzuki, Ryo; Ito, Kohta; Lee, Taeyong; Ogihara, Naomichi

2017-01-01

Accurate identification of the material properties of the plantar soft tissue is important for computer-aided analysis of foot pathologies and design of therapeutic footwear interventions based on subject-specific models of the foot. However, parameter identification of the hyperelastic material properties of plantar soft tissues usually requires an inverse finite element analysis due to the lack of a practical contact model of the indentation test. In the present study, we derive an analytical contact model of a spherical indentation test in order to directly estimate the material properties of the plantar soft tissue. Force-displacement curves of the heel pads are obtained through an indentation experiment. The experimental data are fit to the analytical stress-strain solution of the spherical indentation in order to obtain the parameters. A spherical indentation approach successfully predicted the non-linear material properties of the heel pad without iterative finite element calculation. The force-displacement curve obtained in the present study was found to be situated lower than those identified in previous studies. The proposed framework for identifying the hyperelastic material parameters may facilitate the development of subject-specific FE modeling of the foot for possible clinical and ergonomic applications. Copyright © 2016 Elsevier Ltd. All rights reserved.

Nanomaterials in consumer products: a challenging analytical problem.

PubMed

Contado, Catia

2015-01-01

Many products used in everyday life are made with the assistance of nanotechnologies. Cosmetic, pharmaceuticals, sunscreen, powdered food are only few examples of end products containing nano-sized particles (NPs), generally added to improve the product quality. To evaluate correctly benefits vs. risks of engineered nanomaterials and consequently to legislate in favor of consumer's protection, it is necessary to know the hazards connected with the exposure levels. This information implies transversal studies and a number of different competences. On analytical point of view the identification, quantification and characterization of NPs in food matrices and in cosmetic or personal care products pose significant challenges, because NPs are usually present at low concentration levels and the matrices, in which they are dispersed, are complexes and often incompatible with analytical instruments that would be required for their detection and characterization. This paper focused on some analytical techniques suitable for the detection, characterization and quantification of NPs in food and cosmetics products, reports their recent application in characterizing specific metal and metal-oxide NPs in these two important industrial and market sectors. The need of a characterization of the NPs as much as possible complete, matching complementary information about different metrics, possible achieved through validate procedures, is what clearly emerges from this research. More work should be done to produce standardized materials and to set-up methodologies to determine number-based size distributions and to get quantitative date about the NPs in such a complex matrices.

Nanomaterials in consumer products: a challenging analytical problem

NASA Astrophysics Data System (ADS)

Contado, Catia

2015-08-01

Many products used in everyday life are made with the assistance of nanotechnologies. Cosmetic, pharmaceuticals, sunscreen, powdered food are only few examples of end products containing nano-sized particles (NPs), generally added to improve the product quality. To evaluate correctly benefits versus risks of engineered nanomaterials and consequently to legislate in favor of consumer’s protection, it is necessary to know the hazards connected with the exposure levels. This information implies transversal studies and a number of different competences. On analytical point of view the identification, quantification and characterization of NPs in food matrices and in cosmetic or personal care products pose significant challenges, because NPs are usually present at low concentration levels and the matrices, in which they are dispersed, are complexes and often incompatible with analytical instruments that would be required for their detection and characterization. This paper focused on some analytical techniques suitable for the detection, characterization and quantification of NPs in food and cosmetics products, reports their recent application in characterizing specific metal and metal-oxide NPs in these two important industrial and market sectors. The need of a characterization of the NPs as much as possible complete, matching complementary information about different metrics, possible achieved through validate procedures, is what clearly emerges from this research. More work should be done to produce standardized materials and to set-up methodologies to determine number-based size distributions and to get quantitative date about the NPs in such a complex matrices.

Nanomaterials in consumer products: a challenging analytical problem

PubMed Central

Contado, Catia

2015-01-01

Many products used in everyday life are made with the assistance of nanotechnologies. Cosmetic, pharmaceuticals, sunscreen, powdered food are only few examples of end products containing nano-sized particles (NPs), generally added to improve the product quality. To evaluate correctly benefits vs. risks of engineered nanomaterials and consequently to legislate in favor of consumer's protection, it is necessary to know the hazards connected with the exposure levels. This information implies transversal studies and a number of different competences. On analytical point of view the identification, quantification and characterization of NPs in food matrices and in cosmetic or personal care products pose significant challenges, because NPs are usually present at low concentration levels and the matrices, in which they are dispersed, are complexes and often incompatible with analytical instruments that would be required for their detection and characterization. This paper focused on some analytical techniques suitable for the detection, characterization and quantification of NPs in food and cosmetics products, reports their recent application in characterizing specific metal and metal-oxide NPs in these two important industrial and market sectors. The need of a characterization of the NPs as much as possible complete, matching complementary information about different metrics, possible achieved through validate procedures, is what clearly emerges from this research. More work should be done to produce standardized materials and to set-up methodologies to determine number-based size distributions and to get quantitative date about the NPs in such a complex matrices. PMID:26301216

Numerical Test of Analytical Theories for Perpendicular Diffusion in Small Kubo Number Turbulence

DOE Office of Scientific and Technical Information (OSTI.GOV)

Heusen, M.; Shalchi, A., E-mail: husseinm@myumanitoba.ca, E-mail: andreasm4@yahoo.com

In the literature, one can find various analytical theories for perpendicular diffusion of energetic particles interacting with magnetic turbulence. Besides quasi-linear theory, there are different versions of the nonlinear guiding center (NLGC) theory and the unified nonlinear transport (UNLT) theory. For turbulence with high Kubo numbers, such as two-dimensional turbulence or noisy reduced magnetohydrodynamic turbulence, the aforementioned nonlinear theories provide similar results. For slab and small Kubo number turbulence, however, this is not the case. In the current paper, we compare different linear and nonlinear theories with each other and test-particle simulations for a noisy slab model corresponding to smallmore » Kubo number turbulence. We show that UNLT theory agrees very well with all performed test-particle simulations. In the limit of long parallel mean free paths, the perpendicular mean free path approaches asymptotically the quasi-linear limit as predicted by the UNLT theory. For short parallel mean free paths we find a Rechester and Rosenbluth type of scaling as predicted by UNLT theory as well. The original NLGC theory disagrees with all performed simulations regardless what the parallel mean free path is. The random ballistic interpretation of the NLGC theory agrees much better with the simulations, but compared to UNLT theory the agreement is inferior. We conclude that for this type of small Kubo number turbulence, only the latter theory allows for an accurate description of perpendicular diffusion.« less

Product identification techniques used as training aids for analytical chemists

NASA Technical Reports Server (NTRS)

Grillo, J. P.

1968-01-01

Laboratory staff assistants are trained to use data and observations of routine product analyses performed by experienced analytical chemists when analyzing compounds for potential toxic hazards. Commercial products are used as examples in teaching the analytical approach to unknowns.

System identification of analytical models of damped structures

NASA Technical Reports Server (NTRS)

Fuh, J.-S.; Chen, S.-Y.; Berman, A.

1984-01-01

A procedure is presented for identifying linear nonproportionally damped system. The system damping is assumed to be representable by a real symmetric matrix. Analytical mass, stiffness and damping matrices which constitute an approximate representation of the system are assumed to be available. Given also are an incomplete set of measured natural frequencies, damping ratios and complex mode shapes of the structure, normally obtained from test data. A method is developed to find the smallest changes in the analytical model so that the improved model can exactly predict the measured modal parameters. The present method uses the orthogonality relationship to improve mass and damping matrices and the dynamic equation to find the improved stiffness matrix.

A Revelation: Quantum-Statistics and Classical-Statistics are Analytic-Geometry Conic-Sections and Numbers/Functions: Euler, Riemann, Bernoulli Generating-Functions: Conics to Numbers/Functions Deep Subtle Connections

NASA Astrophysics Data System (ADS)

Descartes, R.; Rota, G.-C.; Euler, L.; Bernoulli, J. D.; Siegel, Edward Carl-Ludwig

2011-03-01

Quantum-statistics Dichotomy: Fermi-Dirac(FDQS) Versus Bose-Einstein(BEQS), respectively with contact-repulsion/non-condensation(FDCR) versus attraction/ condensationBEC are manifestly-demonstrated by Taylor-expansion ONLY of their denominator exponential, identified BOTH as Descartes analytic-geometry conic-sections, FDQS as Elllipse (homotopy to rectangle FDQS distribution-function), VIA Maxwell-Boltzmann classical-statistics(MBCS) to Parabola MORPHISM, VS. BEQS to Hyperbola, Archimedes' HYPERBOLICITY INEVITABILITY, and as well generating-functions[Abramowitz-Stegun, Handbook Math.-Functions--p. 804!!!], respectively of Euler-numbers/functions, (via Riemann zeta-function(domination of quantum-statistics: [Pathria, Statistical-Mechanics; Huang, Statistical-Mechanics]) VS. Bernoulli-numbers/ functions. Much can be learned about statistical-physics from Euler-numbers/functions via Riemann zeta-function(s) VS. Bernoulli-numbers/functions [Conway-Guy, Book of Numbers] and about Euler-numbers/functions, via Riemann zeta-function(s) MORPHISM, VS. Bernoulli-numbers/ functions, visa versa!!! Ex.: Riemann-hypothesis PHYSICS proof PARTLY as BEQS BEC/BEA!!!

Frequency Response Function Based Damage Identification for Aerospace Structures

NASA Astrophysics Data System (ADS)

Oliver, Joseph Acton

Structural health monitoring technologies continue to be pursued for aerospace structures in the interests of increased safety and, when combined with health prognosis, efficiency in life-cycle management. The current dissertation develops and validates damage identification technology as a critical component for structural health monitoring of aerospace structures and, in particular, composite unmanned aerial vehicles. The primary innovation is a statistical least-squares damage identification algorithm based in concepts of parameter estimation and model update. The algorithm uses frequency response function based residual force vectors derived from distributed vibration measurements to update a structural finite element model through statistically weighted least-squares minimization producing location and quantification of the damage, estimation uncertainty, and an updated model. Advantages compared to other approaches include robust applicability to systems which are heavily damped, large, and noisy, with a relatively low number of distributed measurement points compared to the number of analytical degrees-of-freedom of an associated analytical structural model (e.g., modal finite element model). Motivation, research objectives, and a dissertation summary are discussed in Chapter 1 followed by a literature review in Chapter 2. Chapter 3 gives background theory and the damage identification algorithm derivation followed by a study of fundamental algorithm behavior on a two degree-of-freedom mass-spring system with generalized damping. Chapter 4 investigates the impact of noise then successfully proves the algorithm against competing methods using an analytical eight degree-of-freedom mass-spring system with non-proportional structural damping. Chapter 5 extends use of the algorithm to finite element models, including solutions for numerical issues, approaches for modeling damping approximately in reduced coordinates, and analytical validation using a composite

Automated flow cytometric analysis across large numbers of samples and cell types.

PubMed

Chen, Xiaoyi; Hasan, Milena; Libri, Valentina; Urrutia, Alejandra; Beitz, Benoît; Rouilly, Vincent; Duffy, Darragh; Patin, Étienne; Chalmond, Bernard; Rogge, Lars; Quintana-Murci, Lluis; Albert, Matthew L; Schwikowski, Benno

2015-04-01

Multi-parametric flow cytometry is a key technology for characterization of immune cell phenotypes. However, robust high-dimensional post-analytic strategies for automated data analysis in large numbers of donors are still lacking. Here, we report a computational pipeline, called FlowGM, which minimizes operator input, is insensitive to compensation settings, and can be adapted to different analytic panels. A Gaussian Mixture Model (GMM)-based approach was utilized for initial clustering, with the number of clusters determined using Bayesian Information Criterion. Meta-clustering in a reference donor permitted automated identification of 24 cell types across four panels. Cluster labels were integrated into FCS files, thus permitting comparisons to manual gating. Cell numbers and coefficient of variation (CV) were similar between FlowGM and conventional gating for lymphocyte populations, but notably FlowGM provided improved discrimination of "hard-to-gate" monocyte and dendritic cell (DC) subsets. FlowGM thus provides rapid high-dimensional analysis of cell phenotypes and is amenable to cohort studies. Copyright © 2015. Published by Elsevier Inc.

Distance numbers and Wiener indices of IPR fullerenes with formula C10(n-2) (n ≥ 8) in analytical forms

NASA Astrophysics Data System (ADS)

Ghosh, Tapanendu; Mondal, Sukanya; Mondal, Swapnadeep; Mandal, Bholanath

2018-06-01

The IPR fullerenes C10(n-2) with n ≥ 8 have been considered for obtaining their distance numbers and hence the Wiener indices in analytical forms for both even and odd n. The distance numbers along with their patterns have been found to give the number of 13C NMR signals with their respective intensity ratios. Logarithms of Wiener indices have been found to correlate well with the band (HOMO-LUMO) gaps and resonance energies of the respective fullerenes.

Comparison of analytical tools appropriate for identification of proteinaceous additives in historical mortars.

PubMed

Krizova, Iva; Schultz, Julia; Nemec, Ivan; Cabala, Radomir; Hynek, Radovan; Kuckova, Stepanka

2018-01-01

Natural organic additives such as eggs, lard, resins, and oils have been added to mortars since ancient times, because the ancient builders knew of their positive effect on the mortar quality. The tradition of adding organic materials to mortars was commonly handed down only verbally for thousands years. However, this practice disappeared in the nineteenth century, when the usage of modern materials started. Today, one of the most recent topics in the industry of building materials is the reusing of natural organic materials and searching for the forgotten ancient recipes. The research of the old technological approaches involves currently the most advanced analytical techniques and methods. This paper is focussed on testing the possibility of identification of proteinaceous additives in historical mortars and model mortar samples containing blood, bone glue, curd, eggs and gelatine, by Fourier transform infrared (FTIR) and Raman spectroscopy, gas chromatography - mass spectrometry (GC-MS), matrix-assisted laser desorption/ionisation-time of flight mass spectrometry (MALDI-TOF MS), liquid chromatography-electrospray ionisation-quadrupole-time of flight mass spectrometry (LC-ESI-Q-TOF MS) and enzyme-linked immunosorbent assay (ELISA). All these methods were applied to the mortar sample taken from the interior of the medieval (sixteenth century) castle in Namest nad Oslavou in the Czech Republic and their comparison contributed to the rough estimation of the protein additive content in the mortar. The obtained results demonstrate that only LC-ESI-Q-TOF MS, MALDI-TOF MS and ELISA have the sufficiently low detection limits that enable the reliable identification of collagens in historical mortars. Graphical abstract Proteomics analyses of historical mortars.

How Does Social Inequality Continue to Influence Young People's Trajectories through the Apprenticeship Pathway System in South Africa? An Analytical Approach

ERIC Educational Resources Information Center

Kruss, Glenda; Wildschut, Angelique

2016-01-01

The paper contributes by proposing an analytical approach that allows for the identification of patterns of participation in education and training and the labour market, through empirical measurement of the number of transitions and distinct trajectories traversed by groups of individuals. To illustrate the value of the approach, we focus on an…

Analytical redundancy and the design of robust failure detection systems

NASA Technical Reports Server (NTRS)

Chow, E. Y.; Willsky, A. S.

1984-01-01

The Failure Detection and Identification (FDI) process is viewed as consisting of two stages: residual generation and decision making. It is argued that a robust FDI system can be achieved by designing a robust residual generation process. Analytical redundancy, the basis for residual generation, is characterized in terms of a parity space. Using the concept of parity relations, residuals can be generated in a number of ways and the design of a robust residual generation process can be formulated as a minimax optimization problem. An example is included to illustrate this design methodology. Previously announcedd in STAR as N83-20653

An analytical platform for mass spectrometry-based identification and chemical analysis of RNA in ribonucleoprotein complexes.

PubMed

Taoka, Masato; Yamauchi, Yoshio; Nobe, Yuko; Masaki, Shunpei; Nakayama, Hiroshi; Ishikawa, Hideaki; Takahashi, Nobuhiro; Isobe, Toshiaki

2009-11-01

We describe here a mass spectrometry (MS)-based analytical platform of RNA, which combines direct nano-flow reversed-phase liquid chromatography (RPLC) on a spray tip column and a high-resolution LTQ-Orbitrap mass spectrometer. Operating RPLC under a very low flow rate with volatile solvents and MS in the negative mode, we could estimate highly accurate mass values sufficient to predict the nucleotide composition of a approximately 21-nucleotide small interfering RNA, detect post-transcriptional modifications in yeast tRNA, and perform collision-induced dissociation/tandem MS-based structural analysis of nucleolytic fragments of RNA at a sub-femtomole level. Importantly, the method allowed the identification and chemical analysis of small RNAs in ribonucleoprotein (RNP) complex, such as the pre-spliceosomal RNP complex, which was pulled down from cultured cells with a tagged protein cofactor as bait. We have recently developed a unique genome-oriented database search engine, Ariadne, which allows tandem MS-based identification of RNAs in biological samples. Thus, the method presented here has broad potential for automated analysis of RNA; it complements conventional molecular biology-based techniques and is particularly suited for simultaneous analysis of the composition, structure, interaction, and dynamics of RNA and protein components in various cellular RNP complexes.

24 CFR 886.305 - Disclosure and verification of Social Security and Employer Identification Numbers by owners.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Disclosure and verification of Social Security and Employer Identification Numbers by owners. 886.305 Section 886.305 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF THE ASSISTANT...

49 CFR 172.332 - Identification number markings.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 160 mm (6.3 inches) high by 400 mm (15.7 inches) wide with a 15 mm (0.6 inches) black outer border... points high immediately within the upper border of the space on the placard bearing the identification...

49 CFR 172.332 - Identification number markings.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 160 mm (6.3 inches) high by 400 mm (15.7 inches) wide with a 15 mm (0.6 inches) black outer border... points high immediately within the upper border of the space on the placard bearing the identification...

Characteristics of foodborne outbreaks in which use of analytical epidemiological studies contributed to identification of suspected vehicles, European Union, 2007 to 2011.

PubMed

Schlinkmann, K M; Razum, O; Werber, D

2017-04-01

Foodborne disease outbreaks (FBDOs) occur frequently in Europe. Employing analytical epidemiological study designs increases the likelihood of identifying the suspected vehicle(s), but these studies are rarely applied in FBDO investigations. We used multivariable binary logistic regression analysis to identify characteristics of investigated FBDOs reported to the European Food Safety Authority (2007-2011) that were associated with analytical epidemiological evidence (compared to evidence from microbiological investigations/descriptive epidemiology only). The analysis was restricted to FBDO investigations, where the evidence for the suspected vehicle was considered 'strong', i.e. convincing. The presence of analytical epidemiological evidence was reported in 2012 (50%) of these 4038 outbreaks. In multivariable analysis, increasing outbreak size, number of hospitalizations, causative (i.e. aetiological) agent (whether identified and, if so, which one), and the setting in which these outbreaks occurred (e.g. geographically dispersed outbreaks) were independently associated with presence of analytical evidence. The number of investigations with reported analytical epidemiological evidence was unexpectedly high, likely indicating the need for quality assurance within the European Union foodborne outbreak reporting system, and warranting cautious interpretation of our findings. This first analysis of evidence implicating a food vehicle in FBDOs may help to inform public health authorities on when to use analytical epidemiological study designs.

Quality control analytical methods: refractive index.

PubMed

Allen, Loyd V

2015-01-01

There are numerous analytical methods that can be utilized in a compounding pharmacy for a quality-assurance program. Since the index of refraction of a liquid/solution is a physical constant, it can be used to assist in identification of a substance, establish its purity, and, in some instances, to determine the concentration of an analyte in solution. This article serves as an introduction to refractive index and some applications of its use in a compounding program.

Army Digital Test Requirements Analytic Report.

DTIC Science & Technology

1983-07-01

NATION4AL BUREAU Of STANOARCA- 963-A RESEARCH AID DEVELOPMENT TECHNICAL REPORT CECOM800520-1 ARMY DIGITAL TEST I O~ ~REGUIREMENTS ANALYTIC REPORT...16I" I i00000TABLE OF COTIWMI (CmnthnePa 3 6.0 DATA REVIEW 17 6.1 COMPREHENSIVE REVIEW 17 3 6.2 REVIEW CONCLUSIONS 17 7.0 SPECIAL RESEARCH 19 8 .0...Identification - Identification of Information Sources S-- Data Collection - Data Organization - Data Review - Special Research - Technology Analysis - Test

[Studies on the identification of psychotropic substances. VIII. Preparation and various analytical data of reference standard of some stimulants, amfepramone, cathinone, N-ethylamphetamine, fenethylline, fenproporex and mefenorex].

PubMed

Shimamine, M; Takahashi, K; Nakahara, Y

1992-01-01

The Reference Standards for amfepramone, cathinone, N-ethylamphetamine, fenethylline, fenproporex and mefenorex were prepared. Their purities determined by HPLC were more than 99.5%. For the identification and determination of these six drugs, their analytical data were measured and discussed by TLC, UV, IR, HPLC, GC/MS and NMR.

Analytical estimates of the PP-algorithm at low number of Doppler periods per pulse length

NASA Technical Reports Server (NTRS)

Angelova, M. D.; Stoykova, E. V.; Stoyanov, D. V.

1992-01-01

When discussing the Doppler velocity estimators, it is of significant interest to analyze their behavior at a low number of Doppler periods n(sub D) = 2v(sub r)t(sub s)/lambda is approximately equal to 1 within the resolution cell t(sub s) (v(sub 4) is the radial velocity, lambda is the wavelength). Obviously, at n(sub D) is approximately less than 1 the velocity error is essentially increased. The problem of low n(sub D) arises in the planetary boundary layer (PBL), where higher resolutions are usually required but the signal-to-noise ratio (SNR) is relatively high. In this work analytical expression for the relative root mean square (RMS) error of the PP Doppler estimator at low number of periods for a narrowband Doppler signal and arbitrary model of the noise correlation function is obtained. The results are correct at relatively high SNR. The analysis is supported by computer simulations at various SNR's.

Recursive analytical solution describing artificial satellite motion perturbed by an arbitrary number of zonal terms

NASA Technical Reports Server (NTRS)

Mueller, A. C.

1977-01-01

An analytical first order solution has been developed which describes the motion of an artificial satellite perturbed by an arbitrary number of zonal harmonics of the geopotential. A set of recursive relations for the solution, which was deduced from recursive relations of the geopotential, was derived. The method of solution is based on Von-Zeipel's technique applied to a canonical set of two-body elements in the extended phase space which incorporates the true anomaly as a canonical element. The elements are of Poincare type, that is, they are regular for vanishing eccentricities and inclinations. Numerical results show that this solution is accurate to within a few meters after 500 revolutions.

Enabling fluorescent biosensors for the forensic identification of body fluids.

PubMed

Frascione, Nunzianda; Gooch, James; Daniel, Barbara

2013-11-12

The search for body fluids often forms a crucial element of many forensic investigations. Confirming fluid presence at a scene can not only support or refute the circumstantial claims of a victim, suspect or witness, but may additionally provide a valuable source of DNA for further identification purposes. However, current biological fluid testing techniques are impaired by a number of well-characterised limitations; they often give false positives, cannot be used simultaneously, are sample destructive and lack the ability to visually locate fluid depositions. These disadvantages can negatively affect the outcome of a case through missed or misinterpreted evidence. Biosensors are devices able to transduce a biological recognition event into a measurable signal, resulting in real-time analyte detection. The use of innovative optical sensing technology may enable the highly specific and non-destructive detection of biological fluid depositions through interaction with several fluid-endogenous biomarkers. Despite considerable impact in a variety of analytical disciplines, biosensor application within forensic analyses may be considered extremely limited. This article aims to explore a number of prospective biosensing mechanisms and to outline the challenges associated with their adaptation towards detection of fluid-specific analytes.

Structure Identification Using High Resolution Mass ...

EPA Pesticide Factsheets

The iCSS CompTox Dashboard is a publicly accessible dashboard provided by the National Center for Computation Toxicology at the US-EPA. It serves a number of purposes, including providing a chemistry database underpinning many of our public-facing projects (e.g. ToxCast and ExpoCast). The available data and searches provide a valuable path to structure identification using mass spectrometry as the source data. With an underlying database of over 720,000 chemicals, the dashboard has already been used to assist in identifying chemicals present in house dust. This poster reviews the benefits of the EPA’s platform and underlying algorithms used for the purpose of compound identification using high-resolution mass spectrometry data. Standard approaches for both mass and formula lookup are available but the dashboard delivers a novel approach for hit ranking based on functional use of the chemicals. The focus on high-quality data, novel ranking approaches and integration to other resources of value to mass spectrometrists makes the CompTox Dashboard a valuable resource for the identification of environmental chemicals. This abstract does not reflect U.S. EPA policy poster presented at the Eastern Analytical Symposium (EAS) held in Somerset, NJ

31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

Code of Federal Regulations, 2014 CFR

2014-07-01

... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... EE Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to...

Air Sampling Logbook of Region 4 Yellow Bluff Air Study Wilcox County, Alabama SESD Project Identification Number:11-0068

EPA Pesticide Factsheets

Contains the Air Sampling Logbook between 1-24-2011 thru 1-28-2011 from the Region 4 Yellow Bluff Air Study Wilcox County, Alabama SESD Project Identification Number:11-0068 November 2010-December 2010

Probability of identification: a statistical model for the validation of qualitative botanical identification methods.

PubMed

LaBudde, Robert A; Harnly, James M

2012-01-01

A qualitative botanical identification method (BIM) is an analytical procedure that returns a binary result (1 = Identified, 0 = Not Identified). A BIM may be used by a buyer, manufacturer, or regulator to determine whether a botanical material being tested is the same as the target (desired) material, or whether it contains excessive nontarget (undesirable) material. The report describes the development and validation of studies for a BIM based on the proportion of replicates identified, or probability of identification (POI), as the basic observed statistic. The statistical procedures proposed for data analysis follow closely those of the probability of detection, and harmonize the statistical concepts and parameters between quantitative and qualitative method validation. Use of POI statistics also harmonizes statistical concepts for botanical, microbiological, toxin, and other analyte identification methods that produce binary results. The POI statistical model provides a tool for graphical representation of response curves for qualitative methods, reporting of descriptive statistics, and application of performance requirements. Single collaborator and multicollaborative study examples are given.

31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

Code of Federal Regulations, 2014 CFR

2014-07-01

... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

Code of Federal Regulations, 2012 CFR

2012-07-01

... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

Code of Federal Regulations, 2013 CFR

2013-07-01

... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

Code of Federal Regulations, 2014 CFR

2014-07-01

... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

Code of Federal Regulations, 2012 CFR

2012-07-01

... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 359.53 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series I...

Code of Federal Regulations, 2013 CFR

2013-07-01

... (TINs) required for registration of book-entry Series I savings bonds? 359.53 Section 359.53 Money and... Savings Bonds § 359.53 Are taxpayer identification numbers (TINs) required for registration of book-entry Series I savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 351.68 - Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE...

Code of Federal Regulations, 2012 CFR

2012-07-01

... (TINs) required for registration of book-entry Series EE savings bonds? 351.68 Section 351.68 Money and... Savings Bonds § 351.68 Are taxpayer identification numbers (TINs) required for registration of book-entry Series EE savings bonds? The TIN of each person named in the registration is required to purchase a book...

31 CFR 351.43 - Are taxpayer identification numbers (TINs) required for the registration of a definitive Series...

Code of Federal Regulations, 2013 CFR

2013-07-01

... (TINs) required for the registration of a definitive Series EE savings bond? 351.43 Section 351.43 Money... Definitive Series EE Savings Bonds § 351.43 Are taxpayer identification numbers (TINs) required for the... must include the TIN of the owner or first-named coowner. The TIN of the second-named coowner or...

Limitless Analytic Elements

NASA Astrophysics Data System (ADS)

Strack, O. D. L.

2018-02-01

We present equations for new limitless analytic line elements. These elements possess a virtually unlimited number of degrees of freedom. We apply these new limitless analytic elements to head-specified boundaries and to problems with inhomogeneities in hydraulic conductivity. Applications of these new analytic elements to practical problems involving head-specified boundaries require the solution of a very large number of equations. To make the new elements useful in practice, an efficient iterative scheme is required. We present an improved version of the scheme presented by Bandilla et al. (2007), based on the application of Cauchy integrals. The limitless analytic elements are useful when modeling strings of elements, rivers for example, where local conditions are difficult to model, e.g., when a well is close to a river. The solution of such problems is facilitated by increasing the order of the elements to obtain a good solution. This makes it unnecessary to resort to dividing the element in question into many smaller elements to obtain a satisfactory solution.

Translating Learning into Numbers: A Generic Framework for Learning Analytics

ERIC Educational Resources Information Center

Greller, Wolfgang; Drachsler, Hendrik

2012-01-01

With the increase in available educational data, it is expected that Learning Analytics will become a powerful means to inform and support learners, teachers and their institutions in better understanding and predicting personal learning needs and performance. However, the processes and requirements behind the beneficial application of Learning…

27 CFR 20.179 - Package identification number or serial number.

Code of Federal Regulations, 2011 CFR

2011-04-01

... the time of a change, the numbering series in use at the time of the change may be continued. (Sec... at the same time on which all of the marks required by § 20.178 (a)(1) and (a)(3) through (a)(8) are... number “1” and continuing in regular sequence. The dealer shall use a separate but similar number series...

27 CFR 20.179 - Package identification number or serial number.

Code of Federal Regulations, 2013 CFR

2013-04-01

... the time of a change, the numbering series in use at the time of the change may be continued. (Sec... at the same time on which all of the marks required by § 20.178 (a)(1) and (a)(3) through (a)(8) are... number “1” and continuing in regular sequence. The dealer shall use a separate but similar number series...

27 CFR 20.179 - Package identification number or serial number.

Code of Federal Regulations, 2012 CFR

2012-04-01

... the time of a change, the numbering series in use at the time of the change may be continued. (Sec... at the same time on which all of the marks required by § 20.178 (a)(1) and (a)(3) through (a)(8) are... number “1” and continuing in regular sequence. The dealer shall use a separate but similar number series...

27 CFR 20.179 - Package identification number or serial number.

Code of Federal Regulations, 2014 CFR

2014-04-01

... the time of a change, the numbering series in use at the time of the change may be continued. (Sec... at the same time on which all of the marks required by § 20.178 (a)(1) and (a)(3) through (a)(8) are... number “1” and continuing in regular sequence. The dealer shall use a separate but similar number series...

27 CFR 20.179 - Package identification number or serial number.

Code of Federal Regulations, 2010 CFR

2010-04-01

... the time of a change, the numbering series in use at the time of the change may be continued. (Sec... at the same time on which all of the marks required by § 20.178 (a)(1) and (a)(3) through (a)(8) are... number “1” and continuing in regular sequence. The dealer shall use a separate but similar number series...

31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

Code of Federal Regulations, 2013 CFR

2013-07-01

... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond was purchased as a gift or award and the...

31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

Code of Federal Regulations, 2010 CFR

2010-07-01

... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond is being purchased as a gift or award and...

31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

Code of Federal Regulations, 2012 CFR

2012-07-01

... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond was purchased as a gift or award and the...

31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

Code of Federal Regulations, 2011 CFR

2011-07-01

... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond is being purchased as a gift or award and...

31 CFR 359.28 - Are taxpayer identification numbers (TINs) required for the registration of definitive Series I...

Code of Federal Regulations, 2014 CFR

2014-07-01

... (TINs) required for the registration of definitive Series I savings bonds? 359.28 Section 359.28 Money... Definitive Series I Savings Bonds § 359.28 Are taxpayer identification numbers (TINs) required for the... include the TIN of the owner or first-named coowner. If the bond was purchased as a gift or award and the...

ICDA: A Platform for Intelligent Care Delivery Analytics

PubMed Central

Gotz, David; Stavropoulos, Harry; Sun, Jimeng; Wang, Fei

2012-01-01

The identification of high-risk patients is a critical component in improving patient outcomes and managing costs. This paper describes the Intelligent Care Delivery Analytics platform (ICDA), a system which enables risk assessment analytics that process large collections of dynamic electronic medical data to identify at-risk patients. ICDA works by ingesting large volumes of data into a common data model, then orchestrating a collection of analytics that identify at-risk patients. It also provides an interactive environment through which users can access and review the analytics results. In addition, ICDA provides APIs via which analytics results can be retrieved to surface in external applications. A detailed review of ICDA’s architecture is provided. Descriptions of four use cases are included to illustrate ICDA’s application within two different data environments. These use cases showcase the system’s flexibility and exemplify the types of analytics it enables. PMID:23304296

Various extraction and analytical techniques for isolation and identification of secondary metabolites from Nigella sativa seeds.

PubMed

Liu, X; Abd El-Aty, A M; Shim, J-H

2011-10-01

Nigella sativa L. (black cumin), commonly known as black seed, is a member of the Ranunculaceae family. This seed is used as a natural remedy in many Middle Eastern and Far Eastern countries. Extracts prepared from N. sativa have, for centuries, been used for medical purposes. Thus far, the organic compounds in N. sativa, including alkaloids, steroids, carbohydrates, flavonoids, fatty acids, etc. have been fairly well characterized. Herein, we summarize some new extraction techniques, including microwave assisted extraction (MAE) and supercritical extraction techniques (SFE), in addition to the classical method of hydrodistillation (HD), which have been employed for isolation and various analytical techniques used for the identification of secondary metabolites in black seed. We believe that some compounds contained in N. sativa remain to be identified, and that high-throughput screening could help to identify new compounds. A study addressing environmentally-friendly techniques that have minimal or no environmental effects is currently underway in our laboratory.

Conventional sample enrichment strategies combined with high-performance liquid chromatography-solid phase extraction-nuclear magnetic resonance analysis allows analyte identification from a single minuscule Corydalis solida plant tuber.

PubMed

Sturm, Sonja; Seger, Christoph; Godejohann, Markus; Spraul, Manfred; Stuppner, Hermann

2007-09-07

Identification of putative biomarker molecules within the genus Corydalis (Papaveraceae) was pursued by combining conventional off-line sample enrichment with high-performance liquid chromatography-solid phase extraction-nuclear magnetic resonance (HPLC-SPE-NMR) based structure elucidation. Off-line reversed phase solid phase extraction (SPE) was used to enrich the desired analytes from a methanolic extract (93 mg dry weight) of a miniscule single tuber (233 mg dry weight) of C. solida. An aliquot of the SPE fraction (2.1 mg) was subjected to separation in the HPLC-SPE-NMR hyphenation. Chromatographic peaks bearing the metabolites under investigation were trapped in the SPE device in a single experiment and transferred to a 600 MHz NMR spectrometer equipped with a 30 microl cryofit insert fed into a 3 mm cryoprobe. Recorded homo- and heteronuclear 1D and 2D NMR data allowed the identification of the three analytes under investigation as protopine, allocryptopine, and N-methyl-laudanidinium acetate. The latter is a rare alkaloid, which has been isolated only once before.

Analytical specificity and sensitivity of a real-time polymerase chain reaction assay for identification of bovine mastitis pathogens.

PubMed

Koskinen, M T; Holopainen, J; Pyörälä, S; Bredbacka, P; Pitkälä, A; Barkema, H W; Bexiga, R; Roberson, J; Sølverød, L; Piccinini, R; Kelton, D; Lehmusto, H; Niskala, S; Salmikivi, L

2009-03-01

Intramammary infection (IMI), also known as mastitis, is the most frequently occurring and economically the most important infectious disease in dairy cattle. This study provides a validation of the analytical specificity and sensitivity of a real-time PCR-based assay that identifies 11 major pathogen species or species groups responsible for IMI, and a gene coding for staphylococcal beta-lactamase production (penicillin resistance). Altogether, 643 culture isolates originating from clinical bovine mastitis, human, and companion animal samples were analyzed using the assay. The isolates represented 83 different species, groups, or families, and originated from 6 countries in Europe and North America. The analytical specificity and sensitivity of the assay was 100% in bacterial and beta-lactamase identification across all isolates originating from bovine mastitis (n = 454). When considering the entire culture collection (including also the isolates originating from human and companion animal samples), 4 Streptococcus pyogenes, 1 Streptococcus salivarius, and 1 Streptococcus sanguis strain of human origin were identified as Streptococcus uberis, and 3 Shigella spp. strains were identified as Escherichia coli, decreasing specificity to 99% in Strep. uberis and to 99.5% in E. coli. These false-positive results were confirmed by sequencing of the 16S rRNA gene. Specificity and sensitivity remained at 100% for all other bacterial targets across the entire culture collection. In conclusion, the real-time PCR assay shows excellent analytical accuracy and holds much promise for use in routine bovine IMI testing programs. This study provides the basis for evaluating the assay's diagnostic performance against the conventional bacterial culture method in clinical field trials using mastitis milk samples.

An Analysis of Serial Number Tracking Automatic Identification Technology as Used in Naval Aviation Programs

NASA Astrophysics Data System (ADS)

Csorba, Robert

2002-09-01

The Government Accounting Office found that the Navy, between 1996 and 1998, lost 3 billion in materiel in-transit. This thesis explores the benefits and cost of automatic identification and serial number tracking technologies under consideration by the Naval Supply Systems Command and the Naval Air Systems Command. Detailed cost-savings estimates are made for each aircraft type in the Navy inventory. Project and item managers of repairable components using Serial Number Tracking were surveyed as to the value of this system. It concludes that two thirds of the in-transit losses can be avoided with implementation of effective information technology-based logistics and maintenance tracking systems. Recommendations are made for specific steps and components of such an implementation. Suggestions are made for further research.

Ion mobility spectrometer, spectrometer analyte detection and identification verification system, and method

DOEpatents

Atkinson, David A.

2002-01-01

Methods and apparatus for ion mobility spectrometry and analyte detection and identification verification system are disclosed. The apparatus is configured to be used in an ion mobility spectrometer and includes a plurality of reactant reservoirs configured to contain a plurality of reactants which can be reacted with the sample to form adducts having varying ion mobilities. A carrier fluid, such as air or nitrogen, is used to carry the sample into the spectrometer. The plurality of reactants are configured to be selectively added to the carrier stream by use inlet and outlet manifolds in communication with the reagent reservoirs, the reservoirs being selectively isolatable by valves. The invention further includes a spectrometer having the reagent system described. In the method, a first reactant is used with the sample. Following a positive result, a second reactant is used to determine whether a predicted response occurs. The occurrence of the second predicted response tends to verify the existence of a component of interest within the sample. A third reactant can also be used to provide further verification of the existence of a component of interest. A library can be established of known responses of compounds of interest with various reactants and the results of a specific multi-reactant survey of a sample can be compared against the library to determine whether a component detected in the sample is likely to be a specific component of interest.

Behind the Numbers: Why Web Analytics Matter to Your Institution

ERIC Educational Resources Information Center

Thayer, Shelby

2011-01-01

Web analytics measure, collect, analyze, and report Internet data that help website managers improve the effectiveness of the site and its marketing efforts by allowing them to better understand how users interact with the site. Applying this data can help drive the right people to the website and keep them there. According to Joshua Dodson, Web…

26 CFR 301.6109-2 - Authority of the Secretary of Agriculture to collect employer identification numbers for purposes...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 26 Internal Revenue 18 2013-04-01 2013-04-01 false Authority of the Secretary of Agriculture to... the Secretary of Agriculture to collect employer identification numbers for purposes of the Food Stamp Act of 1977. (a) In general. The Secretary of Agriculture may require each applicant retail food store...

26 CFR 301.6109-2 - Authority of the Secretary of Agriculture to collect employer identification numbers for purposes...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 26 Internal Revenue 18 2011-04-01 2011-04-01 false Authority of the Secretary of Agriculture to... the Secretary of Agriculture to collect employer identification numbers for purposes of the Food Stamp Act of 1977. (a) In general. The Secretary of Agriculture may require each applicant retail food store...

26 CFR 301.6109-2 - Authority of the Secretary of Agriculture to collect employer identification numbers for purposes...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Authority of the Secretary of Agriculture to... the Secretary of Agriculture to collect employer identification numbers for purposes of the Food Stamp Act of 1977. (a) In general. The Secretary of Agriculture may require each applicant retail food store...

26 CFR 301.6109-2 - Authority of the Secretary of Agriculture to collect employer identification numbers for purposes...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 26 Internal Revenue 18 2012-04-01 2012-04-01 false Authority of the Secretary of Agriculture to... the Secretary of Agriculture to collect employer identification numbers for purposes of the Food Stamp Act of 1977. (a) In general. The Secretary of Agriculture may require each applicant retail food store...

26 CFR 301.6109-2 - Authority of the Secretary of Agriculture to collect employer identification numbers for purposes...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 26 Internal Revenue 18 2014-04-01 2014-04-01 false Authority of the Secretary of Agriculture to... the Secretary of Agriculture to collect employer identification numbers for purposes of the Food Stamp Act of 1977. (a) In general. The Secretary of Agriculture may require each applicant retail food store...

20 CFR 404.1220 - Identification numbers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... numbers for payroll record units. SSA assigns, at a State's request, unit numbers to payroll record units within a State or political subdivision. When a State requests separate payroll record unit numbers, it must furnish the following: (1) The name of each payroll record unit for the coverage group; and (2...

Modal identification experiment

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.

1992-01-01

The Modal Identification Experiment (MIE) is a proposed on-orbit experiment being developed by NASA's Office of Aeronautics and Space Technology wherein a series of vibration measurements would be made on various configurations of Space Station Freedom (SSF) during its on-orbit assembly phase. The experiment is to be conducted in conjunction with station reboost operations and consists of measuring the dynamic responses of the spacecraft produced by station-based attitude control system and reboost thrusters, recording and transmitting the data, and processing the data on the ground to identify the natural frequencies, damping factors, and shapes of significant vibratory modes. The experiment would likely be a part of the Space Station on-orbit verification. Basic research objectives of MIE are to evaluate and improve methods for analytically modeling large space structures, to develop techniques for performing in-space modal testing, and to validate candidate techniques for in-space modal identification. From an engineering point of view, MIE will provide the first opportunity to obtain vibration data for the fully-assembled structure because SSF is too large and too flexible to be tested as a single unit on the ground. Such full-system data is essential for validating the analytical model of SSF which would be used in any engineering efforts associated with structural or control system changes that might be made to the station as missions evolve over time. Extensive analytical simulations of on-orbit tests, as well exploratory laboratory simulations using small-scale models, have been conducted in-house and under contract to develop a measurement plan and evaluate its potential performance. In particular, performance trade and parametric studies conducted as part of these simulations were used to resolve issues related to the number and location of the measurements, the type of excitation, data acquisition and data processing, effects of noise and nonlinearities

Analytical quality by design: a tool for regulatory flexibility and robust analytics.

PubMed

Peraman, Ramalingam; Bhadraya, Kalva; Padmanabha Reddy, Yiragamreddy

2015-01-01

Very recently, Food and Drug Administration (FDA) has approved a few new drug applications (NDA) with regulatory flexibility for quality by design (QbD) based analytical approach. The concept of QbD applied to analytical method development is known now as AQbD (analytical quality by design). It allows the analytical method for movement within method operable design region (MODR). Unlike current methods, analytical method developed using analytical quality by design (AQbD) approach reduces the number of out-of-trend (OOT) results and out-of-specification (OOS) results due to the robustness of the method within the region. It is a current trend among pharmaceutical industry to implement analytical quality by design (AQbD) in method development process as a part of risk management, pharmaceutical development, and pharmaceutical quality system (ICH Q10). Owing to the lack explanatory reviews, this paper has been communicated to discuss different views of analytical scientists about implementation of AQbD in pharmaceutical quality system and also to correlate with product quality by design and pharmaceutical analytical technology (PAT).

Analytical Quality by Design: A Tool for Regulatory Flexibility and Robust Analytics

PubMed Central

Bhadraya, Kalva; Padmanabha Reddy, Yiragamreddy

2015-01-01

Very recently, Food and Drug Administration (FDA) has approved a few new drug applications (NDA) with regulatory flexibility for quality by design (QbD) based analytical approach. The concept of QbD applied to analytical method development is known now as AQbD (analytical quality by design). It allows the analytical method for movement within method operable design region (MODR). Unlike current methods, analytical method developed using analytical quality by design (AQbD) approach reduces the number of out-of-trend (OOT) results and out-of-specification (OOS) results due to the robustness of the method within the region. It is a current trend among pharmaceutical industry to implement analytical quality by design (AQbD) in method development process as a part of risk management, pharmaceutical development, and pharmaceutical quality system (ICH Q10). Owing to the lack explanatory reviews, this paper has been communicated to discuss different views of analytical scientists about implementation of AQbD in pharmaceutical quality system and also to correlate with product quality by design and pharmaceutical analytical technology (PAT). PMID:25722723

Big Data Analytics for Demand Response: Clustering Over Space and Time

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chelmis, Charalampos; Kolte, Jahanvi; Prasanna, Viktor K.

The pervasive deployment of advanced sensing infrastructure in Cyber-Physical systems, such as the Smart Grid, has resulted in an unprecedented data explosion. Such data exhibit both large volumes and high velocity characteristics, two of the three pillars of Big Data, and have a time-series notion as datasets in this context typically consist of successive measurements made over a time interval. Time-series data can be valuable for data mining and analytics tasks such as identifying the “right” customers among a diverse population, to target for Demand Response programs. However, time series are challenging to mine due to their high dimensionality. Inmore » this paper, we motivate this problem using a real application from the smart grid domain. We explore novel representations of time-series data for BigData analytics, and propose a clustering technique for determining natural segmentation of customers and identification of temporal consumption patterns. Our method is generizable to large-scale, real-world scenarios, without making any assumptions about the data. We evaluate our technique using real datasets from smart meters, totaling ~ 18,200,000 data points, and show the efficacy of our technique in efficiency detecting the number of optimal number of clusters.« less

The Numbers Game: A Values Clarification Strategy

ERIC Educational Resources Information Center

Ognibene, Richard; Winter, Cynthia

1976-01-01

After completing personal identification forms consisting only of numbers (phone number, Social Security number, etc.), students discuss the need for more personal means of identification within society in order for people to feel a useful sense of identity. (AV)

Chemical Detection and Identification Techniques for Exobiology Flight Experiments

NASA Technical Reports Server (NTRS)

Kojiro, Daniel R.; Sheverev, Valery A.; Khromov, Nikolai A.

2002-01-01

Exobiology flight experiments require highly sensitive instrumentation for in situ analysis of the volatile chemical species that occur in the atmospheres and surfaces of various bodies within the solar system. The complex mixtures encountered place a heavy burden on the analytical Instrumentation to detect and identify all species present. The minimal resources available onboard for such missions mandate that the instruments provide maximum analytical capabilities with minimal requirements of volume, weight and consumables. Advances in technology may be achieved by increasing the amount of information acquired by a given technique with greater analytical capabilities and miniaturization of proven terrestrial technology. We describe here methods to develop analytical instruments for the detection and identification of a wide range of chemical species using Gas Chromatography. These efforts to expand the analytical capabilities of GC technology are focused on the development of detectors for the GC which provide sample identification independent of the GC retention time data. A novel new approach employs Penning Ionization Electron Spectroscopy (PIES).

Visual Analytics in Public Safety: Example Capabilities for Example Government Agencies

DTIC Science & Technology

2011-10-01

is not limited to: the Police Records Information Management Environment for British Columbia (PRIME-BC), the Police Reporting and Occurrence System...and filtering for rapid identification of relevant documents - Graphical environment for visual evidence marshaling - Interactive linking and...analytical reasoning facilitated by interactive visual interfaces and integration with computational analytics. Indeed, a wide variety of technologies

Hierarchical Analytical Approaches for Unraveling the Composition of Proprietary Mixtures

EPA Pesticide Factsheets

The composition of commercial mixtures including pesticide inert ingredients, aircraft deicers, and aqueous film-forming foam (AFFF) formulations, and by analogy, fracking fluids, are proprietary. Quantitative analytical methodologies can only be developed for mixture components once their identities are known. Because proprietary mixtures may contain volatile and non-volatile components, a hierarchy of analytical methods is often required for the full identification of all proprietary mixture components.

Determination and identification of synthetic cannabinoids and their metabolites in different matrices by modern analytical techniques - a review.

PubMed

Znaleziona, Joanna; Ginterová, Pavlína; Petr, Jan; Ondra, Peter; Válka, Ivo; Ševčík, Juraj; Chrastina, Jan; Maier, Vítězslav

2015-05-18

Synthetic cannabinoids have gained popularity due to their easy accessibility and psychoactive effects. Furthermore, they cannot be detected in urine by routine drug monitoring. The wide range of active ingredients in analyzed matrices hinders the development of a standard analytical method for their determination. Moreover, their possible side effects are not well known which increases the danger. This review is focused on the sample preparation and the determination of synthetic cannabinoids in different matrices (serum, urine, herbal blends, oral fluid, hair) published since 2004. The review includes separation and identification techniques, such as thin layer chromatography, gas and liquid chromatography and capillary electrophoresis, mostly coupled with mass spectrometry. The review also includes results by spectral methods like infrared spectroscopy, nuclear magnetic resonance or direct-injection mass spectrometry. Copyright © 2015 Elsevier B.V. All rights reserved.

A visual identification key utilizing both gestalt and analytic approaches to identification of Carices present in North America (Plantae, Cyperaceae)

PubMed Central

2013-01-01

Abstract Images are a critical part of the identification process because they enable direct, immediate and relatively unmediated comparisons between a specimen being identified and one or more reference specimens. The Carices Interactive Visual Identification Key (CIVIK) is a novel tool for identification of North American Carex species, the largest vascular plant genus in North America, and two less numerous closely-related genera, Cymophyllus and Kobresia. CIVIK incorporates 1288 high-resolution tiled image sets that allow users to zoom in to view minute structures that are crucial at times for identification in these genera. Morphological data are derived from the earlier Carex Interactive Identification Key (CIIK) which in turn used data from the Flora of North America treatments. In this new iteration, images can be viewed in a grid or histogram format, allowing multiple representations of data. In both formats the images are fully zoomable. PMID:24723777

Metabolomics and Diabetes: Analytical and Computational Approaches

PubMed Central

Sas, Kelli M.; Karnovsky, Alla; Michailidis, George

2015-01-01

Diabetes is characterized by altered metabolism of key molecules and regulatory pathways. The phenotypic expression of diabetes and associated complications encompasses complex interactions between genetic, environmental, and tissue-specific factors that require an integrated understanding of perturbations in the network of genes, proteins, and metabolites. Metabolomics attempts to systematically identify and quantitate small molecule metabolites from biological systems. The recent rapid development of a variety of analytical platforms based on mass spectrometry and nuclear magnetic resonance have enabled identification of complex metabolic phenotypes. Continued development of bioinformatics and analytical strategies has facilitated the discovery of causal links in understanding the pathophysiology of diabetes and its complications. Here, we summarize the metabolomics workflow, including analytical, statistical, and computational tools, highlight recent applications of metabolomics in diabetes research, and discuss the challenges in the field. PMID:25713200

Proposed Confidence Scale and ID Score in the Identification of Known-Unknown Compounds Using High Resolution MS Data

NASA Astrophysics Data System (ADS)

Rochat, Bertrand

2017-04-01

High-resolution (HR) MS instruments recording HR-full scan allow analysts to go further beyond pre-acquisition choices. Untargeted acquisition can reveal unexpected compounds or concentrations and can be performed for preliminary diagnosis attempt. Then, revealed compounds will have to be identified for interpretations. Whereas the need of reference standards is mandatory to confirm identification, the diverse information collected from HRMS allows identifying unknown compounds with relatively high degree of confidence without reference standards injected in the same analytical sequence. However, there is a necessity to evaluate the degree of confidence in putative identifications, possibly before further targeted analyses. This is why a confidence scale and a score in the identification of (non-peptidic) known-unknown, defined as compounds with entries in database, is proposed for (LC-) HRMS data. The scale is based on two representative documents edited by the European Commission (2007/657/EC) and the Metabolomics Standard Initiative (MSI), in an attempt to build a bridge between the communities of metabolomics and screening labs. With this confidence scale, an identification (ID) score is determined as [a number, a letter, and a number] (e.g., 2D3), from the following three criteria: I, a General Identification Category (1, confirmed, 2, putatively identified, 3, annotated compounds/classes, and 4, unknown); II, a Chromatography Class based on the relative retention time (from the narrowest tolerance, A, to no chromatographic references, D); and III, an Identification Point Level (1, very high, 2, high, and 3, normal level) based on the number of identification points collected. Three putative identification examples of known-unknown will be presented.

Author Identification Systems

ERIC Educational Resources Information Center

Wagner, A. Ben

2009-01-01

Many efforts are currently underway to disambiguate author names and assign unique identification numbers so that publications by a given scholar can be reliably grouped together. This paper reviews a number of operational and in-development services. Some systems like ResearcherId.Com depend on self-registration and self-identification of a…

Comprehensive data resources and analytical tools for pathological association of aminoacyl tRNA synthetases with cancer

PubMed Central

Lee, Ji-Hyun; You, Sungyong; Hyeon, Do Young; Kang, Byeongsoo; Kim, Hyerim; Park, Kyoung Mii; Han, Byungwoo; Hwang, Daehee; Kim, Sunghoon

2015-01-01

Mammalian cells have cytoplasmic and mitochondrial aminoacyl-tRNA synthetases (ARSs) that catalyze aminoacylation of tRNAs during protein synthesis. Despite their housekeeping functions in protein synthesis, recently, ARSs and ARS-interacting multifunctional proteins (AIMPs) have been shown to play important roles in disease pathogenesis through their interactions with disease-related molecules. However, there are lacks of data resources and analytical tools that can be used to examine disease associations of ARS/AIMPs. Here, we developed an Integrated Database for ARSs (IDA), a resource database including cancer genomic/proteomic and interaction data of ARS/AIMPs. IDA includes mRNA expression, somatic mutation, copy number variation and phosphorylation data of ARS/AIMPs and their interacting proteins in various cancers. IDA further includes an array of analytical tools for exploration of disease association of ARS/AIMPs, identification of disease-associated ARS/AIMP interactors and reconstruction of ARS-dependent disease-perturbed network models. Therefore, IDA provides both comprehensive data resources and analytical tools for understanding potential roles of ARS/AIMPs in cancers. Database URL: http://ida.biocon.re.kr/, http://ars.biocon.re.kr/ PMID:25824651

SociAL Sensor Analytics: Measuring Phenomenology at Scale

DOE Office of Scientific and Technical Information (OSTI.GOV)

Corley, Courtney D.; Dowling, Chase P.; Rose, Stuart J.

The objective of this paper is to present a system for interrogating immense social media streams through analytical methodologies that characterize topics and events critical to tactical and strategic planning. First, we propose a conceptual framework for interpreting social media as a sensor network. Time-series models and topic clustering algorithms are used to implement this concept into a functioning analytical system. Next, we address two scientific challenges: 1) to understand, quantify, and baseline phenomenology of social media at scale, and 2) to develop analytical methodologies to detect and investigate events of interest. This paper then documents computational methods and reportsmore » experimental findings that address these challenges. Ultimately, the ability to process billions of social media posts per week over a period of years enables the identification of patterns and predictors of tactical and strategic concerns at an unprecedented rate through SociAL Sensor Analytics (SALSA).« less

We Are Not Numbers: The Use of Identification Codes in Online Learning

ERIC Educational Resources Information Center

Francis-Poscente, Krista; Moisey, Susan Darlene

2012-01-01

This paper discusses students' experiences with the use of identification codes in a graduate course delivered asynchronously via the Internet. While teaching an introductory masters level graduate course in distance learning, the authors discovered that the learning management system, Moodle, was programmed to display identification codes rather…

Gas-phase ion-molecule reactions for the identification of the sulfone functionality in protonated analytes in a linear quadrupole ion trap mass spectrometer.

PubMed

Tang, Weijuan; Sheng, Huaming; Kong, John Y; Yerabolu, Ravikiran; Zhu, Hanyu; Max, Joann; Zhang, Minli; Kenttämaa, Hilkka I

2016-06-30

The oxidation of sulfur atoms is an important biotransformation pathway for many sulfur-containing drugs. In order to rapidly identify the sulfone functionality in drug metabolites, a tandem mass spectrometric method based on ion-molecule reactions was developed. A phosphorus-containing reagent, trimethyl phosphite (TMP), was allowed to react with protonated analytes with various functionalities in a linear quadrupole ion trap mass spectrometer. The reaction products and reaction efficiencies were measured. Only protonated sulfone model compounds were found to react with TMP to form a characteristic [TMP adduct-MeOH] product ion. All other protonated compounds investigated, with functionalities such as sulfoxide, N-oxide, hydroxylamino, keto, carboxylic acid, and aliphatic and aromatic amino, only react with TMP via proton transfer and/or addition. The specificity of the reaction was further demonstrated by using a sulfoxide-containing anti-inflammatory drug, sulindac, as well as its metabolite sulindac sulfone. A method based on functional group-selective ion-molecule reactions in a linear quadrupole ion trap mass spectrometer has been demonstrated for the identification of the sulfone functionality in protonated analytes. A characteristic [TMP adduct-MeOH] product ion was only formed for the protonated sulfone analytes. The applicability of the TMP reagent in identifying sulfone functionalities in drug metabolites was also demonstrated. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Screening for Triterpenoid Saponins in Plants Using Hyphenated Analytical Platforms.

PubMed

Khakimov, Bekzod; Tseng, Li Hong; Godejohann, Markus; Bak, Søren; Engelsen, Søren Balling

2016-11-24

Recently the number of studies investigating triterpenoid saponins has drastically increased due to their diverse and potentially attractive biological activities. Currently the literature contains chemical structures of few hundreds of triterpenoid saponins of plant and animal origin. Triterpenoid saponins consist of a triterpene aglycone with one or more sugar moieties attached to it. However, due to similar physico-chemical properties, isolation and identification of a large diversity of triterpenoid saponins remain challenging. This study demonstrates a methodology to screen saponins using hyphenated analytical platforms, GC-MS, LC-MS/MS, and LC-SPE-NMR/MS, in the example of two different phenotypes of the model plant Barbarea vulgaris (winter cress), glabrous (G) and pubescent (P) type that are known to differ by their insect resistance. The proposed methodology allows for detailed comparison of saponin profiles from intact plant extracts as well as saponin aglycone profiles from hydrolysed samples. Continuously measured 1D proton NMR data during LC separation along with mass spectrometry data revealed significant differences, including contents of saponins, types of aglycones and numbers of sugar moieties attached to the aglycone. A total of 49 peaks were tentatively identified as saponins from both plants; they are derived from eight types of aglycones and with 2-5 sugar moieties. Identification of two previously known insect-deterrent saponins, hederagenin cellobioside and oleanolic acid cellobioside, demonstrated the applicability of the methodology for relatively rapid screening of bioactive compounds.

An overview on forensic analysis devoted to analytical chemists.

PubMed

Castillo-Peinado, L S; Luque de Castro, M D

2017-05-15

The present article has as main aim to show analytical chemists interested in forensic analysis the world they will face if decision in favor of being a forensic analytical chemist is adopted. With this purpose, the most outstanding aspects of forensic analysis in dealing with sampling (involving both bodily and no bodily samples), sample preparation, and analytical equipment used in detection, identification and quantitation of key sample components are critically discussed. The role of the great omics in forensic analysis, and the growing role of the youngest of the great omics -metabolomics- are also discussed. The foreseeable role of integrative omics is also outlined. Copyright © 2017 Elsevier B.V. All rights reserved.

An analytical solution of Richards' equation providing the physical basis of SCS curve number method and its proportionality relationship

NASA Astrophysics Data System (ADS)

Hooshyar, Milad; Wang, Dingbao

2016-08-01

The empirical proportionality relationship, which indicates that the ratio of cumulative surface runoff and infiltration to their corresponding potentials are equal, is the basis of the extensively used Soil Conservation Service Curve Number (SCS-CN) method. The objective of this paper is to provide the physical basis of the SCS-CN method and its proportionality hypothesis from the infiltration excess runoff generation perspective. To achieve this purpose, an analytical solution of Richards' equation is derived for ponded infiltration in shallow water table environment under the following boundary conditions: (1) the soil is saturated at the land surface; and (2) there is a no-flux boundary which moves downward. The solution is established based on the assumptions of negligible gravitational effect, constant soil water diffusivity, and hydrostatic soil moisture profile between the no-flux boundary and water table. Based on the derived analytical solution, the proportionality hypothesis is a reasonable approximation for rainfall partitioning at the early stage of ponded infiltration in areas with a shallow water table for coarse textured soils.

A 48 SNP set for grapevine cultivar identification

PubMed Central

2011-01-01

Background Rapid and consistent genotyping is an important requirement for cultivar identification in many crop species. Among them grapevine cultivars have been the subject of multiple studies given the large number of synonyms and homonyms generated during many centuries of vegetative multiplication and exchange. Simple sequence repeat (SSR) markers have been preferred until now because of their high level of polymorphism, their codominant nature and their high profile repeatability. However, the rapid application of partial or complete genome sequencing approaches is identifying thousands of single nucleotide polymorphisms (SNP) that can be very useful for such purposes. Although SNP markers are bi-allelic, and therefore not as polymorphic as microsatellites, the high number of loci that can be multiplexed and the possibilities of automation as well as their highly repeatable results under any analytical procedure make them the future markers of choice for any type of genetic identification. Results We analyzed over 300 SNP in the genome of grapevine using a re-sequencing strategy in a selection of 11 genotypes. Among the identified polymorphisms, we selected 48 SNP spread across all grapevine chromosomes with allele frequencies balanced enough as to provide sufficient information content for genetic identification in grapevine allowing for good genotyping success rate. Marker stability was tested in repeated analyses of a selected group of cultivars obtained worldwide to demonstrate their usefulness in genetic identification. Conclusions We have selected a set of 48 stable SNP markers with a high discrimination power and a uniform genome distribution (2-3 markers/chromosome), which is proposed as a standard set for grapevine (Vitis vinifera L.) genotyping. Any previous problems derived from microsatellite allele confusion between labs or the need to run reference cultivars to identify allele sizes disappear using this type of marker. Furthermore, because SNP

Bias Assessment of General Chemistry Analytes using Commutable Samples.

PubMed

Koerbin, Gus; Tate, Jillian R; Ryan, Julie; Jones, Graham Rd; Sikaris, Ken A; Kanowski, David; Reed, Maxine; Gill, Janice; Koumantakis, George; Yen, Tina; St John, Andrew; Hickman, Peter E; Simpson, Aaron; Graham, Peter

2014-11-01

Harmonisation of reference intervals for routine general chemistry analytes has been a goal for many years. Analytical bias may prevent this harmonisation. To determine if analytical bias is present when comparing methods, the use of commutable samples, or samples that have the same properties as the clinical samples routinely analysed, should be used as reference samples to eliminate the possibility of matrix effect. The use of commutable samples has improved the identification of unacceptable analytical performance in the Netherlands and Spain. The International Federation of Clinical Chemistry and Laboratory Medicine (IFCC) has undertaken a pilot study using commutable samples in an attempt to determine not only country specific reference intervals but to make them comparable between countries. Australia and New Zealand, through the Australasian Association of Clinical Biochemists (AACB), have also undertaken an assessment of analytical bias using commutable samples and determined that of the 27 general chemistry analytes studied, 19 showed sufficiently small between method biases as to not prevent harmonisation of reference intervals. Application of evidence based approaches including the determination of analytical bias using commutable material is necessary when seeking to harmonise reference intervals.

Literature Review on Processing and Analytical Methods for ...

EPA Pesticide Factsheets

Report The purpose of this report was to survey the open literature to determine the current state of the science regarding the processing and analytical methods currently available for recovery of F. tularensis from water and soil matrices, and to determine what gaps remain in the collective knowledge concerning F. tularensis identification from environmental samples.

Identification - obstacle to individuation, or: on how to become 'me'.

PubMed

Cavalli, Alessandra

2017-04-01

This paper will explore the use of identification with aspects of a lost object as a defensive strategy to cope with traumatic loss, and will show how in the depth of the analytic work this identification can be accessed and made conscious. Descriptions of work with a three-year-old boy illustrate how the sudden loss of his mother's breasts had made weaning un-accessible to him, and how, in the absence of a good experience of separation, the process of mourning had not been able to take place. Instead, identification with aspects of the lost breast was used as a defence against pain, and this state of affairs was proving a hindrance to individuation. In the discussion of the case material, the use of identification as a defence will be highlighted, and a differentiation made between abandonment and separation as this illuminates the link between mourning and individuation. © 2017, The Society of Analytical Psychology.

Identification and analytical characterization of six synthetic cannabinoids NNL-3, 5F-NPB-22-7N, 5F-AKB-48-7N, 5F-EDMB-PINACA, EMB-FUBINACA, and EG-018.

PubMed

Liu, Cuimei; Jia, Wei; Hua, Zhendong; Qian, Zhenhua

2017-08-01

Clinical and forensic toxicology laboratories are continuously confronted by analytical challenges when dealing with the new psychoactive substances phenomenon. The number of synthetic cannabinoids, the chemical diversity, and the speed of emergence make this group of compounds particularly challenging in terms of detection, monitoring, and responding. Three indazole 7N positional isomer synthetic cannabinoids, two ethyl 2-amino-3-methylbutanoate-type synthetic cannabinoids, and one 9H-carbazole substituted synthetic cannabinoid were identified in seized materials. These six synthetic cannabinoid derivatives included: 1H-benzo[d] [1,2,3]triazol-1-yl 1-(5-fluoropentyl)-1H-pyrrolo[2,3-b]pyridine-3-carboxylate (NNL-3, 1), quinolin-8-yl 1-(5-fluoropentyl)-1H-pyrrolo[2,3-b]pyridine-3-carboxylate (5F-NPB-22-7N, 2), N-((1 s,3 s)-adamantan-1-yl)-1-(5-fluoropentyl)-1H-pyrrolo[2,3-b]pyridine-3-carboxamide (5F-AKB-48-7N, 3), ethyl 2-(1-(5-fluoropentyl)-1H-indazole-3-carboxamido)-3,3-dimethylbutanoate (5F-EDMB-PINACA, 4), ethyl 2-(1-(4-fluorobenzyl)-1H-indazole-3-carboxamido)-3-methylbutanoate (EMB-FUBINACA, 5), and naphthalen-1-yl(9-pentyl-9H-carbazol-3-yl)methanone (EG-018, 6). The identification was based on ultra-high-performance liquid chromatography-quadrupole time-of-flight-mass spectrometry (UHPLC-QTOF-MS), gas chromatography-mass spectrometry (GC-MS), and nuclear magnetic resonance spectroscopy (NMR). The analytical characterization of these six synthetic cannabinoids was described, so as to assist forensic laboratories in identifying these compounds or other substances with similar structure in their case work. To our knowledge, no analytical data about the compounds 1-5 have appeared until now, making this the first report on these compounds. The GC-MS data of 6 has been reported, but this study added the LC-MS, NMR, and Fourier transform infrared (FTIR), data to render the analytical data collection process more complete. Copyright © 2017 John Wiley & Sons, Ltd

Hysterical identification in an eleven-year-old girl.

PubMed

Sherick, Ivan

2014-10-01

The concept of hysterical identification was reviewed and illustrated in child analytic process material obtained in the treatment of a latencyage girl. It is the author's contention that "hysteria" and its dynamics, for example, hysterical identification, have fallen into disuse, to the disservice of our child patients. This contribution is aimed at getting child analysts to reconsider the merits of this outcome.

Community-Based Efforts to Increase the Identification of the Number of Gifted Minority Children.

ERIC Educational Resources Information Center

Davis, Paul I.

The document reports on a study of community-based identification of gifted and talented Black middle-school students, as an adjunct to formal identification procedures. A developmental framework for the identification of the gifted minority child was distributed to 17 known leaders in the Black community (including ministers, youth leaders in…

Probability of identification (POI): a statistical model for the validation of qualitative botanical identification methods

USDA-ARS?s Scientific Manuscript database

A qualitative botanical identification method (BIM) is an analytical procedure which returns a binary result (1 = Identified, 0 = Not Identified). A BIM may be used by a buyer, manufacturer, or regulator to determine whether a botanical material being tested is the same as the target (desired) mate...

Glycan analysis of glycoprotein pharmaceuticals: Evaluation of analytical approaches to Z number determination in pharmaceutical erythropoietin products.

PubMed

Yuen, Chun-Ting; Zhou, Yong; Wang, Qing-Zhou; Hou, Ji-Feng; Bristow, Adrian; Wang, Jun-Zhi

2011-11-01

N-Glycosylation of many glycoprotein drugs is important for biological activity and should therefore be the target of specific and quantitative analytical methods. In this study, we focus on the two N-glycan mapping approaches that are used in pharmacopoeial monograph to analyse N-glycans released from fifteen preparations of recombinant human erythropoietin supplied by ten Chinese manufacturers. Underivatised N-glycans were analysed by high performance anion-exchange chromatography with pulsed amperometric detection and fluorophore-labelled N-glycans were analysed by weak anion-exchange and normal-phase high performance liquid chromatography. N-glycans were also analysed by matrix assisted laser desorption ionisation mass spectrometry. The release of N-glycans by PNGase F was shown to be consistent. Z number, a mathematical expression of the total negatively charged N-glycans composition has provided a convenient way to summarise the complex dataset and it might be suitable for product consistency monitoring. However, this Z number reduces the information of individual acidic N-glycan structure and is also found to be method dependent. Therefore, its use requires clear specification and validation. In this study, we only found weak but positive correlation between the Z number and its bioactivity. Wide range of N-glycans yields were obtained from the fifteen preparations but the significance of their differences is unclear. Copyright © 2011 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

Measuring myokines with cardiovascular functions: pre-analytical variables affecting the analytical output.

PubMed

Lombardi, Giovanni; Sansoni, Veronica; Banfi, Giuseppe

2017-08-01

In the last few years, a growing number of molecules have been associated to an endocrine function of the skeletal muscle. Circulating myokine levels, in turn, have been associated with several pathophysiological conditions including the cardiovascular ones. However, data from different studies are often not completely comparable or even discordant. This would be due, at least in part, to the whole set of situations related to the preparation of the patient prior to blood sampling, blood sampling procedure, processing and/or store. This entire process constitutes the pre-analytical phase. The importance of the pre-analytical phase is often not considered. However, in routine diagnostics, the 70% of the errors are in this phase. Moreover, errors during the pre-analytical phase are carried over in the analytical phase and affects the final output. In research, for example, when samples are collected over a long time and by different laboratories, a standardized procedure for sample collecting and the correct procedure for sample storage are acknowledged. In this review, we discuss the pre-analytical variables potentially affecting the measurement of myokines with cardiovascular functions.

30 CFR 45.3 - Identification of independent contractors.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Identification of independent contractors. 45.3... ADMINISTRATIVE REQUIREMENTS INDEPENDENT CONTRACTORS § 45.3 Identification of independent contractors. (a) Any independent contractor may obtain a permanent MSHA identification number. To obtain an identification number...

Surface pressure data on a series of analytic forebodies at Mach numbers from 1.70 to 4.50 and combined angles of attack and sideslip. [Langley Unitary Plan wind tunnel

NASA Technical Reports Server (NTRS)

Townsend, J. C.; Howell, D. T.; Collins, I. K.; Hayes, C.

1979-01-01

Tabulated surface pressure data for a series of four forebodies which have analytically defined cross sections and which are based on a parabolic arc profile having a 20 deg half angle at the nose are presented without analysis. The first forebody has a circular cross section, and the second has a cross section which is an ellipse with an axis ratio of 2/1. The third has a cross section defined by a lobed analytic curve. The fourth forebody has cross sections which develop smoothly from circular at the pointed nose through the lobed analytic curve and back to circular at the aft end. The data generally cover angles of attack from -5 deg to 20 deg at angles of sideslip from 0 deg to 5 deg for Mach numbers of 1.70, 2.50, 3.95, and 4.50 at a constant Reynolds number.

Identification of Organic Colorants in Art Objects by Solution Spectrophotometry: Pigments.

ERIC Educational Resources Information Center

Billmeyer, Fred W., Jr.; And Others

1981-01-01

Describes solution spectrophotometry as a simple, rapid identification technique for organic paint pigments. Reports research which includes analytical schemes for the extraction and separation of organic pigments based on their solubilities, and the preparation of an extensive reference collection of spectral curves allowing their identification.…

7 CFR 201.30b - Lot number or other lot identification of vegetable seed in containers of more than 1 pound.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Lot number or other lot identification of vegetable seed in containers of more than 1 pound. 201.30b Section 201.30b Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED)...

7 CFR 201.30b - Lot number or other lot identification of vegetable seed in containers of more than 1 pound.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 3 2011-01-01 2011-01-01 false Lot number or other lot identification of vegetable seed in containers of more than 1 pound. 201.30b Section 201.30b Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED)...

7 CFR 201.30b - Lot number or other lot identification of vegetable seed in containers of more than 1 pound.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Lot number or other lot identification of vegetable seed in containers of more than 1 pound. 201.30b Section 201.30b Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED)...

7 CFR 201.30b - Lot number or other lot identification of vegetable seed in containers of more than 1 pound.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Lot number or other lot identification of vegetable seed in containers of more than 1 pound. 201.30b Section 201.30b Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED)...

7 CFR 201.30b - Lot number or other lot identification of vegetable seed in containers of more than 1 pound.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Lot number or other lot identification of vegetable seed in containers of more than 1 pound. 201.30b Section 201.30b Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED)...

Analytical methods in sphingolipidomics: Quantitative and profiling approaches in food analysis.

PubMed

Canela, Núria; Herrero, Pol; Mariné, Sílvia; Nadal, Pedro; Ras, Maria Rosa; Rodríguez, Miguel Ángel; Arola, Lluís

2016-01-08

In recent years, sphingolipidomics has emerged as an interesting omic science that encompasses the study of the full sphingolipidome characterization, content, structure and activity in cells, tissues or organisms. Like other omics, it has the potential to impact biomarker discovery, drug development and systems biology knowledge. Concretely, dietary food sphingolipids have gained considerable importance due to their extensively reported bioactivity. Because of the complexity of this lipid family and their diversity among foods, powerful analytical methodologies are needed for their study. The analytical tools developed in the past have been improved with the enormous advances made in recent years in mass spectrometry (MS) and chromatography, which allow the convenient and sensitive identification and quantitation of sphingolipid classes and form the basis of current sphingolipidomics methodologies. In addition, novel hyphenated nuclear magnetic resonance (NMR) strategies, new ionization strategies, and MS imaging are outlined as promising technologies to shape the future of sphingolipid analyses. This review traces the analytical methods of sphingolipidomics in food analysis concerning sample extraction, chromatographic separation, the identification and quantification of sphingolipids by MS and their structural elucidation by NMR. Copyright © 2015 Elsevier B.V. All rights reserved.

"Analytical" vector-functions I

NASA Astrophysics Data System (ADS)

Todorov, Vladimir Todorov

2017-12-01

In this note we try to give a new (or different) approach to the investigation of analytical vector functions. More precisely a notion of a power xn; n ∈ ℕ+ of a vector x ∈ ℝ3 is introduced which allows to define an "analytical" function f : ℝ3 → ℝ3. Let furthermore f (ξ )= ∑n =0 ∞ anξn be an analytical function of the real variable ξ. Here we replace the power ξn of the number ξ with the power of a vector x ∈ ℝ3 to obtain a vector "power series" f (x )= ∑n =0 ∞ anxn . We research some properties of the vector series as well as some applications of this idea. Note that an "analytical" vector function does not depend of any basis, which may be used in research into some problems in physics.

A novel optimization algorithm for MIMO Hammerstein model identification under heavy-tailed noise.

PubMed

Jin, Qibing; Wang, Hehe; Su, Qixin; Jiang, Beiyan; Liu, Qie

2018-01-01

In this paper, we study the system identification of multi-input multi-output (MIMO) Hammerstein processes under the typical heavy-tailed noise. To the best of our knowledge, there is no general analytical method to solve this identification problem. Motivated by this, we propose a general identification method to solve this problem based on a Gaussian-Mixture Distribution intelligent optimization algorithm (GMDA). The nonlinear part of Hammerstein process is modeled by a Radial Basis Function (RBF) neural network, and the identification problem is converted to an optimization problem. To overcome the drawbacks of analytical identification method in the presence of heavy-tailed noise, a meta-heuristic optimization algorithm, Cuckoo search (CS) algorithm is used. To improve its performance for this identification problem, the Gaussian-mixture Distribution (GMD) and the GMD sequences are introduced to improve the performance of the standard CS algorithm. Numerical simulations for different MIMO Hammerstein models are carried out, and the simulation results verify the effectiveness of the proposed GMDA. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Impact of Educational Activities in Reducing Pre-Analytical Laboratory Errors

PubMed Central

Al-Ghaithi, Hamed; Pathare, Anil; Al-Mamari, Sahimah; Villacrucis, Rodrigo; Fawaz, Naglaa; Alkindi, Salam

2017-01-01

Objectives Pre-analytic errors during diagnostic laboratory investigations can lead to increased patient morbidity and mortality. This study aimed to ascertain the effect of educational nursing activities on the incidence of pre-analytical errors resulting in non-conforming blood samples. Methods This study was conducted between January 2008 and December 2015. All specimens received at the Haematology Laboratory of the Sultan Qaboos University Hospital, Muscat, Oman, during this period were prospectively collected and analysed. Similar data from 2007 were collected retrospectively and used as a baseline for comparison. Non-conforming samples were defined as either clotted samples, haemolysed samples, use of the wrong anticoagulant, insufficient quantities of blood collected, incorrect/lack of labelling on a sample or lack of delivery of a sample in spite of a sample request. From 2008 onwards, multiple educational training activities directed at the hospital nursing staff and nursing students primarily responsible for blood collection were implemented on a regular basis. Results After initiating corrective measures in 2008, a progressive reduction in the percentage of non-conforming samples was observed from 2009 onwards. Despite a 127.84% increase in the total number of specimens received, there was a significant reduction in non-conforming samples from 0.29% in 2007 to 0.07% in 2015, resulting in an improvement of 75.86% (P <0.050). In particular, specimen identification errors decreased by 0.056%, with a 96.55% improvement. Conclusion Targeted educational activities directed primarily towards hospital nursing staff had a positive impact on the quality of laboratory specimens by significantly reducing pre-analytical errors. PMID:29062553

Analytical techniques: A compilation

NASA Technical Reports Server (NTRS)

1975-01-01

A compilation, containing articles on a number of analytical techniques for quality control engineers and laboratory workers, is presented. Data cover techniques for testing electronic, mechanical, and optical systems, nondestructive testing techniques, and gas analysis techniques.

Identification challenges for large space structures

NASA Technical Reports Server (NTRS)

Pappa, Richard S.

1990-01-01

The paper examines the on-orbit modal identification of large space structures, stressing the importance of planning and experience, in preparation for the Space Station Structural Characterization Experiment (SSSCE) for the Space Station Freedom. The necessary information to foresee and overcome practical difficulties is considered in connection with seven key factors, including test objectives, dynamic complexity of the structure, data quality, extent of exploratory studies, availability and understanding of software tools, experience with similar problems, and pretest analytical conditions. These factors affect identification success in ground tests. Comparisons with similar ground tests of assembled systems are discussed, showing that the constraints of space tests make these factors more significant. The absence of data and experiences relating to on-orbit modal identification testing is shown to make identification a uniquely mathematical problem, although all spacecraft are constructed and verified by proven engineering methods.

Molecular Identification of the Schwannomatosis Locus

DTIC Science & Technology

2005-07-01

AD Award Number: DAMD17-03-1-0445 TITLE: Molecular Identification of the Schwannomatosis Locus PRINCIPAL INVESTIGATOR: Mia M. MacCollin, M.D...NUMBER Molecular Identification of the Schwannomatosis Locus 5b. GRANT NUMBER DAMD17-03-1-0445 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER...can be found on next page. 15. SUBJECT TERMS schwannomatosis , tumor suppressor gene, NF2, molecular genetics 16. SECURITY CLASSIFICATION OF: 17

An Analytical Framework for Studying Small-Number Effects in Catalytic Reaction Networks: A Probability Generating Function Approach to Chemical Master Equations

PubMed Central

Nakagawa, Masaki; Togashi, Yuichi

2016-01-01

Cell activities primarily depend on chemical reactions, especially those mediated by enzymes, and this has led to these activities being modeled as catalytic reaction networks. Although deterministic ordinary differential equations of concentrations (rate equations) have been widely used for modeling purposes in the field of systems biology, it has been pointed out that these catalytic reaction networks may behave in a way that is qualitatively different from such deterministic representation when the number of molecules for certain chemical species in the system is small. Apart from this, representing these phenomena by simple binary (on/off) systems that omit the quantities would also not be feasible. As recent experiments have revealed the existence of rare chemical species in cells, the importance of being able to model potential small-number phenomena is being recognized. However, most preceding studies were based on numerical simulations, and theoretical frameworks to analyze these phenomena have not been sufficiently developed. Motivated by the small-number issue, this work aimed to develop an analytical framework for the chemical master equation describing the distributional behavior of catalytic reaction networks. For simplicity, we considered networks consisting of two-body catalytic reactions. We used the probability generating function method to obtain the steady-state solutions of the chemical master equation without specifying the parameters. We obtained the time evolution equations of the first- and second-order moments of concentrations, and the steady-state analytical solution of the chemical master equation under certain conditions. These results led to the rank conservation law, the connecting state to the winner-takes-all state, and analysis of 2-molecules M-species systems. A possible interpretation of the theoretical conclusion for actual biochemical pathways is also discussed. PMID:27047384

Reverse transcription-polymerase chain reaction molecular testing of cytology specimens: Pre-analytic and analytic factors.

PubMed

Bridge, Julia A

2017-01-01

The introduction of molecular testing into cytopathology laboratory practice has expanded the types of samples considered feasible for identifying genetic alterations that play an essential role in cancer diagnosis and treatment. Reverse transcription-polymerase chain reaction (RT-PCR), a sensitive and specific technical approach for amplifying a defined segment of RNA after it has been reverse-transcribed into its DNA complement, is commonly used in clinical practice for the identification of recurrent or tumor-specific fusion gene events. Real-time RT-PCR (quantitative RT-PCR), a technical variation, also permits the quantitation of products generated during each cycle of the polymerase chain reaction process. This review addresses qualitative and quantitative pre-analytic and analytic considerations of RT-PCR as they relate to various cytologic specimens. An understanding of these aspects of genetic testing is central to attaining optimal results in the face of the challenges that cytology specimens may present. Cancer Cytopathol 2017;125:11-19. © 2016 American Cancer Society. © 2016 American Cancer Society.

A simple analytical aerodynamic model of Langley Winged-Cone Aerospace Plane concept

NASA Technical Reports Server (NTRS)

Pamadi, Bandu N.

1994-01-01

A simple three DOF analytical aerodynamic model of the Langley Winged-Coned Aerospace Plane concept is presented in a form suitable for simulation, trajectory optimization, and guidance and control studies. The analytical model is especially suitable for methods based on variational calculus. Analytical expressions are presented for lift, drag, and pitching moment coefficients from subsonic to hypersonic Mach numbers and angles of attack up to +/- 20 deg. This analytical model has break points at Mach numbers of 1.0, 1.4, 4.0, and 6.0. Across these Mach number break points, the lift, drag, and pitching moment coefficients are made continuous but their derivatives are not. There are no break points in angle of attack. The effect of control surface deflection is not considered. The present analytical model compares well with the APAS calculations and wind tunnel test data for most angles of attack and Mach numbers.

48 CFR 304.7001 - Numbering acquisitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 4 2011-10-01 2011-10-01 false Numbering acquisitions. 304.7001 Section 304.7001 Federal Acquisition Regulations System HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATIVE MATTERS Acquisition Instrument Identification Numbering System 304.7001 Numbering acquisitions. (a...

Monitoring a large number of pesticides and transformation products in water samples from Spain and Italy.

PubMed

Rousis, Nikolaos I; Bade, Richard; Bijlsma, Lubertus; Zuccato, Ettore; Sancho, Juan V; Hernandez, Felix; Castiglioni, Sara

2017-07-01

Assessing the presence of pesticides in environmental waters is particularly challenging because of the huge number of substances used which may end up in the environment. Furthermore, the occurrence of pesticide transformation products (TPs) and/or metabolites makes this task even harder. Most studies dealing with the determination of pesticides in water include only a small number of analytes and in many cases no TPs. The present study applied a screening method for the determination of a large number of pesticides and TPs in wastewater (WW) and surface water (SW) from Spain and Italy. Liquid chromatography coupled to high-resolution mass spectrometry (HRMS) was used to screen a database of 450 pesticides and TPs. Detection and identification were based on specific criteria, i.e. mass accuracy, fragmentation, and comparison of retention times when reference standards were available, or a retention time prediction model when standards were not available. Seventeen pesticides and TPs from different classes (fungicides, herbicides and insecticides) were found in WW in Italy and Spain, and twelve in SW. Generally, in both countries more compounds were detected in effluent WW than in influent WW, and in SW than WW. This might be due to the analytical sensitivity in the different matrices, but also to the presence of multiple sources of pollution. HRMS proved a good screening tool to determine a large number of substances in water and identify some priority compounds for further quantitative analysis. Copyright © 2017 Elsevier Inc. All rights reserved.

Exploring patterns in resource utilization prior to the formal identification of homelessness in recently returned veterans.

PubMed

Gundlapalli, Adi V; Redd, Andrew; Carter, Marjorie E; Palmer, Miland; Peterson, Rachel; Samore, Matthew H

2014-01-01

There are limited data on resources utilized by US Veterans prior to their identification as being homeless. We performed visual analytics on longitudinal medical encounter data prior to the official recognition of homelessness in a large cohort of OEF/OIF Veterans. A statistically significant increase in numbers of several categories of visits in the immediate 30 days prior to the recognition of homelessness was noted as compared to an earlier period. This finding has the potential to inform prediction algorithms based on structured data with a view to intervention and mitigation of homelessness among Veterans.

Cognitive Achievements in Identification Skills

ERIC Educational Resources Information Center

Randler, Christoph; Bogner, Franz X.

2006-01-01

Species identification tasks are generally accepted as fundamental aspects of biodiversity education. Our educational training unit, therefore, focused on identification skills by introducing stuffed specimens in combination with identification books and preparation booklets. We limited the number of bird species to six. 492 secondary school…

WMD Intent Identification and Interaction Analysis Using the Dark Web

DTIC Science & Technology

2016-04-01

WMD Intent Identification and Interaction Analysis Using the Dark Web Distribution Statement A. Approved for public release; distribution is...Organization/Institution: University of Arizona Project Title: WMD Intent Identification and Interaction Analysis Using the Dark Web Report Period: Final...and social media analytics. We are leveraging our highly successful Dark Web project as our research testbed (for identifying target adversarial

Applications of Text Analytics in the Intelligence Community

DTIC Science & Technology

2016-06-01

TEXT ANALYTICS IN THE INTELLIGENCE COMMUNITY by Daniel M. Hall June 2016 Thesis Advisor: Johannes O. Royset Second Reader: Jon Alt THIS...Master’s thesis 4. TITLE AND SUBTITLE APPLICATIONS OF TEXT ANALYTICS IN THE INTELLIGENCE COMMUNITY 5. FUNDING NUMBERS 6. AUTHOR(S) Daniel M...DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) We evaluate Anseri, a commercial text analytics software, and its ability to assist a

New Analytical Monographs on TCM Herbal Drugs for Quality Proof.

PubMed

Wagner, Hildebert; Bauer, Rudolf; Melchart, Dieter

2016-01-01

Regardless of specific national drug regulations there is an international consensus that all TCM drugs must meet stipulated high quality standards focusing on authentication, identification and chemical composition. In addition, safety of all TCM drugs prescribed by physicians has to be guaranteed. During the 25 years history of the TCM hospital Bad Kötzting, 171 TCM drugs underwent an analytical quality proof including thin layer as well as high pressure liquid chromatography. As from now mass spectroscopy will also be available as analytical tool. The findings are compiled and already published in three volumes of analytical monographs. One more volume will be published shortly, and a fifth volume is in preparation. The main issues of the analytical procedure in TCM drugs like authenticity, botanical nomenclature, variability of plant species and parts as well as processing are pointed out and possible ways to overcome them are sketched. © 2016 S. Karger GmbH, Freiburg.

77 FR 56212 - Federal Acquisition Regulation; Information Collection; Use of Data Universal Numbering System...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-12

...; Information Collection; Use of Data Universal Numbering System (DUNS) as Primary Contractor Identification... Numbering System (DUNS) as primary contractor identification. The DUNS number is the nine-digit... System (DUNS) as Primary Contractor Identification, by any of the following methods: Regulations.gov...

ENVIRONMENTAL ANALYTICAL CHEMISTRY OF ...

EPA Pesticide Factsheets

Within the scope of a number of emerging contaminant issues in environmental analysis, one area that has received a great deal of public interest has been the assessment of the role of pharmaceuticals and personal care products (PPCPs) as stressors and agents of change in ecosystems as well as their role in unplanned human exposure. The relationship between personal actions and the occurrence of PPCPs in the environment is clear-cut and comprehensible to the public. In this overview, we attempt to examine the separations aspect of the analytical approach to the vast array of potential analytes among this class of compounds. We also highlight the relationship between these compounds and endocrine disrupting compounds (EDCs) and between PPCPs and EDCs and the more traditional environmental analytes such as the persistent organic pollutants (POPs). Although the spectrum of chemical behavior extends from hydrophobic to hydrophilic, the current focus has shifted to moderately and highly polar analytes. Thus, emphasis on HPLC and LC/MS has grown and MS/MS has become a detection technique of choice with either electrospray ionization or atmospheric pressure chemical ionization. This contrasts markedly with the bench mark approach of capillary GC, GC/MS and electron ionization in traditional environmental analysis. The expansion of the analyte list has fostered new vigor in the development of environmental analytical chemistry, modernized the range of tools appli

9 CFR 355.8 - Official number.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 9 Animals and Animal Products 2 2013-01-01 2013-01-01 false Official number. 355.8 Section 355.8... IDENTIFICATION AS TO CLASS, QUALITY, QUANTITY, AND CONDITION Inauguration of Inspection § 355.8 Official number. To each plant granted inspection an official number shall be assigned. Such number shall be preceded...

9 CFR 355.8 - Official number.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 9 Animals and Animal Products 2 2012-01-01 2012-01-01 false Official number. 355.8 Section 355.8... IDENTIFICATION AS TO CLASS, QUALITY, QUANTITY, AND CONDITION Inauguration of Inspection § 355.8 Official number. To each plant granted inspection an official number shall be assigned. Such number shall be preceded...

9 CFR 355.8 - Official number.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 9 Animals and Animal Products 2 2014-01-01 2014-01-01 false Official number. 355.8 Section 355.8... IDENTIFICATION AS TO CLASS, QUALITY, QUANTITY, AND CONDITION Inauguration of Inspection § 355.8 Official number. To each plant granted inspection an official number shall be assigned. Such number shall be preceded...

48 CFR 204.7003 - Basic PII number.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 3 2014-10-01 2014-10-01 false Basic PII number. 204.7003... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Uniform Procurement Instrument Identification Numbers 204.7003 Basic PII number. (a) Elements of a number. The number consists of 13 alpha-numeric characters...

48 CFR 204.7003 - Basic PII number.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 3 2013-10-01 2013-10-01 false Basic PII number. 204.7003... OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Uniform Procurement Instrument Identification Numbers 204.7003 Basic PII number. (a) Elements of a number. The number consists of 13 alpha-numeric characters...

Substructure System Identification for Finite Element Model Updating

NASA Technical Reports Server (NTRS)

Craig, Roy R., Jr.; Blades, Eric L.

1997-01-01

This report summarizes research conducted under a NASA grant on the topic 'Substructure System Identification for Finite Element Model Updating.' The research concerns ongoing development of the Substructure System Identification Algorithm (SSID Algorithm), a system identification algorithm that can be used to obtain mathematical models of substructures, like Space Shuttle payloads. In the present study, particular attention was given to the following topics: making the algorithm robust to noisy test data, extending the algorithm to accept experimental FRF data that covers a broad frequency bandwidth, and developing a test analytical model (TAM) for use in relating test data to reduced-order finite element models.

Size separation of analytes using monomeric surfactants

DOEpatents

Yeung, Edward S.; Wei, Wei

2005-04-12

A sieving medium for use in the separation of analytes in a sample containing at least one such analyte comprises a monomeric non-ionic surfactant of the of the general formula, B-A, wherein A is a hydrophilic moiety and B is a hydrophobic moiety, present in a solvent at a concentration forming a self-assembled micelle configuration under selected conditions and having an aggregation number providing an equivalent weight capable of effecting the size separation of the sample solution so as to resolve a target analyte(s) in a solution containing the same, the size separation taking place in a chromatography or electrophoresis separation system.

European specialist porphyria laboratories: diagnostic strategies, analytical quality, clinical interpretation, and reporting as assessed by an external quality assurance program.

PubMed

Aarsand, Aasne K; Villanger, Jørild H; Støle, Egil; Deybach, Jean-Charles; Marsden, Joanne; To-Figueras, Jordi; Badminton, Mike; Elder, George H; Sandberg, Sverre

2011-11-01

The porphyrias are a group of rare metabolic disorders whose diagnosis depends on identification of specific patterns of porphyrin precursor and porphyrin accumulation in urine, blood, and feces. Diagnostic tests for porphyria are performed by specialized laboratories in many countries. Data regarding the analytical and diagnostic performance of these laboratories are scarce. We distributed 5 sets of multispecimen samples from different porphyria patients accompanied by clinical case histories to 18-21 European specialist porphyria laboratories/centers as part of a European Porphyria Network organized external analytical and postanalytical quality assessment (EQA) program. The laboratories stated which analyses they would normally have performed given the case histories and reported results of all porphyria-related analyses available, interpretative comments, and diagnoses. Reported diagnostic strategies initially showed considerable diversity, but the number of laboratories applying adequate diagnostic strategies increased during the study period. We found an average interlaboratory CV of 50% (range 12%-152%) for analytes in absolute concentrations. Result normalization by forming ratios to the upper reference limits did not reduce this variation. Sixty-five percent of reported results were within biological variation-based analytical quality specifications. Clinical interpretation of the obtained analytical results was accurate, and most laboratories established the correct diagnosis in all distributions. Based on a case-based EQA scheme, variations were apparent in analytical and diagnostic performance between European specialist porphyria laboratories. Our findings reinforce the use of EQA schemes as an essential tool to assess both analytical and diagnostic processes and thereby to improve patient care in rare diseases.

Error-Detecting Identification Codes for Algebra Students.

ERIC Educational Resources Information Center

Sutherland, David C.

1990-01-01

Discusses common error-detecting identification codes using linear algebra terminology to provide an interesting application of algebra. Presents examples from the International Standard Book Number, the Universal Product Code, bank identification numbers, and the ZIP code bar code. (YP)

49 CFR 229.105 - Steam generator number.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 49 Transportation 4 2013-10-01 2013-10-01 false Steam generator number. 229.105 Section 229.105....105 Steam generator number. An identification number shall be marked on the steam generator's separator and that number entered on FRA Form F 6180-49A. ...

49 CFR 229.105 - Steam generator number.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 49 Transportation 4 2014-10-01 2014-10-01 false Steam generator number. 229.105 Section 229.105....105 Steam generator number. An identification number shall be marked on the steam generator's separator and that number entered on FRA Form F 6180-49A. ...

Empirically Optimized Flow Cytometric Immunoassay Validates Ambient Analyte Theory

PubMed Central

Parpia, Zaheer A.; Kelso, David M.

2010-01-01

Ekins’ ambient analyte theory predicts, counter intuitively, that an immunoassay’s limit of detection can be improved by reducing the amount of capture antibody. In addition, it also anticipates that results should be insensitive to the volume of sample as well as the amount of capture antibody added. The objective of this study is to empirically validate all of the performance characteristics predicted by Ekins’ theory. Flow cytometric analysis was used to detect binding between a fluorescent ligand and capture microparticles since it can directly measure fractional occupancy, the primary response variable in ambient analyte theory. After experimentally determining ambient analyte conditions, comparisons were carried out between ambient and non-ambient assays in terms of their signal strengths, limits of detection, and their sensitivity to variations in reaction volume and number of particles. The critical number of binding sites required for an assay to be in the ambient analyte region was estimated to be 0.1VKd. As predicted, such assays exhibited superior signal/noise levels and limits of detection; and were not affected by variations in sample volume and number of binding sites. When the signal detected measures fractional occupancy, ambient analyte theory is an excellent guide to developing assays with superior performance characteristics. PMID:20152793

FIRST FLOOR PLAN OF REMOTE ANALYTICAL FACILITY (CPP627) SHOWING REMOTE ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

FIRST FLOOR PLAN OF REMOTE ANALYTICAL FACILITY (CPP-627) SHOWING REMOTE ANALYTICAL LABORATORY, DECONTAMINATION ROOM, AND MULTICURIE CELL ROOM. INL DRAWING NUMBER 200-0627-00-008-105065. ALTERNATE ID NUMBER 4272-14-102. - Idaho National Engineering Laboratory, Idaho Chemical Processing Plant, Fuel Reprocessing Complex, Scoville, Butte County, ID

The Identification and Significance of Intuitive and Analytic Problem Solving Approaches Among College Physics Students

ERIC Educational Resources Information Center

Thorsland, Martin N.; Novak, Joseph D.

1974-01-01

Described is an approach to assessment of intuitive and analytic modes of thinking in physics. These modes of thinking are associated with Ausubel's theory of learning. High ability in either intuitive or analytic thinking was associated with success in college physics, with high learning efficiency following a pattern expected on the basis of…

Prevalence of Pre-Analytical Errors in Clinical Chemistry Diagnostic Labs in Sulaimani City of Iraqi Kurdistan.

PubMed

Najat, Dereen

2017-01-01

Laboratory testing is roughly divided into three phases: a pre-analytical phase, an analytical phase and a post-analytical phase. Most analytical errors have been attributed to the analytical phase. However, recent studies have shown that up to 70% of analytical errors reflect the pre-analytical phase. The pre-analytical phase comprises all processes from the time a laboratory request is made by a physician until the specimen is analyzed at the lab. Generally, the pre-analytical phase includes patient preparation, specimen transportation, specimen collection and storage. In the present study, we report the first comprehensive assessment of the frequency and types of pre-analytical errors at the Sulaimani diagnostic labs in Iraqi Kurdistan. Over 2 months, 5500 venous blood samples were observed in 10 public diagnostic labs of Sulaimani City. The percentages of rejected samples and types of sample inappropriateness were evaluated. The percentage of each of the following pre-analytical errors were recorded: delay in sample transportation, clotted samples, expired reagents, hemolyzed samples, samples not on ice, incorrect sample identification, insufficient sample, tube broken in centrifuge, request procedure errors, sample mix-ups, communication conflicts, misinterpreted orders, lipemic samples, contaminated samples and missed physician's request orders. The difference between the relative frequencies of errors observed in the hospitals considered was tested using a proportional Z test. In particular, the survey aimed to discover whether analytical errors were recorded and examine the types of platforms used in the selected diagnostic labs. The analysis showed a high prevalence of improper sample handling during the pre-analytical phase. In appropriate samples, the percentage error was as high as 39%. The major reasons for rejection were hemolyzed samples (9%), incorrect sample identification (8%) and clotted samples (6%). Most quality control schemes at Sulaimani

A Big Data Analytics Methodology Program in the Health Sector

ERIC Educational Resources Information Center

Lawler, James; Joseph, Anthony; Howell-Barber, H.

2016-01-01

The benefits of Big Data Analytics are cited frequently in the literature. However, the difficulties of implementing Big Data Analytics can limit the number of organizational projects. In this study, the authors evaluate business, procedural and technical factors in the implementation of Big Data Analytics, applying a methodology program. Focusing…

Efficient alignment-free DNA barcode analytics.

PubMed

Kuksa, Pavel; Pavlovic, Vladimir

2009-11-10

In this work we consider barcode DNA analysis problems and address them using alternative, alignment-free methods and representations which model sequences as collections of short sequence fragments (features). The methods use fixed-length representations (spectrum) for barcode sequences to measure similarities or dissimilarities between sequences coming from the same or different species. The spectrum-based representation not only allows for accurate and computationally efficient species classification, but also opens possibility for accurate clustering analysis of putative species barcodes and identification of critical within-barcode loci distinguishing barcodes of different sample groups. New alignment-free methods provide highly accurate and fast DNA barcode-based identification and classification of species with substantial improvements in accuracy and speed over state-of-the-art barcode analysis methods. We evaluate our methods on problems of species classification and identification using barcodes, important and relevant analytical tasks in many practical applications (adverse species movement monitoring, sampling surveys for unknown or pathogenic species identification, biodiversity assessment, etc.) On several benchmark barcode datasets, including ACG, Astraptes, Hesperiidae, Fish larvae, and Birds of North America, proposed alignment-free methods considerably improve prediction accuracy compared to prior results. We also observe significant running time improvements over the state-of-the-art methods. Our results show that newly developed alignment-free methods for DNA barcoding can efficiently and with high accuracy identify specimens by examining only few barcode features, resulting in increased scalability and interpretability of current computational approaches to barcoding.

Efficient alignment-free DNA barcode analytics

PubMed Central

Kuksa, Pavel; Pavlovic, Vladimir

2009-01-01

Background In this work we consider barcode DNA analysis problems and address them using alternative, alignment-free methods and representations which model sequences as collections of short sequence fragments (features). The methods use fixed-length representations (spectrum) for barcode sequences to measure similarities or dissimilarities between sequences coming from the same or different species. The spectrum-based representation not only allows for accurate and computationally efficient species classification, but also opens possibility for accurate clustering analysis of putative species barcodes and identification of critical within-barcode loci distinguishing barcodes of different sample groups. Results New alignment-free methods provide highly accurate and fast DNA barcode-based identification and classification of species with substantial improvements in accuracy and speed over state-of-the-art barcode analysis methods. We evaluate our methods on problems of species classification and identification using barcodes, important and relevant analytical tasks in many practical applications (adverse species movement monitoring, sampling surveys for unknown or pathogenic species identification, biodiversity assessment, etc.) On several benchmark barcode datasets, including ACG, Astraptes, Hesperiidae, Fish larvae, and Birds of North America, proposed alignment-free methods considerably improve prediction accuracy compared to prior results. We also observe significant running time improvements over the state-of-the-art methods. Conclusion Our results show that newly developed alignment-free methods for DNA barcoding can efficiently and with high accuracy identify specimens by examining only few barcode features, resulting in increased scalability and interpretability of current computational approaches to barcoding. PMID:19900305

Complete Hexose Isomer Identification with Mass Spectrometry

NASA Astrophysics Data System (ADS)

Nagy, Gabe; Pohl, Nicola L. B.

2015-04-01

The first analytical method is presented for the identification and absolute configuration determination of all 24 aldohexose and 2-ketohexose isomers, including the D and L enantiomers for allose, altrose, galactose, glucose, gulose, idose, mannose, talose, fructose, psicose, sorbose, and tagatose. Two unique fixed ligand kinetic method combinations were discovered to create significant enough energetic differences to achieve chiral discrimination among all 24 hexoses. Each of these 24 hexoses yields unique ratios of a specific pair of fragment ions that allows for simultaneous determination of identification and absolute configuration. This mass spectrometric-based methodology can be readily employed for accurate identification of any isolated monosaccharide from an unknown biological source. This work provides a key step towards the goal of complete de novo carbohydrate analysis.

Identification of copy number variation in French dairy and beef breeds using next-generation sequencing.

PubMed

Letaief, Rabia; Rebours, Emmanuelle; Grohs, Cécile; Meersseman, Cédric; Fritz, Sébastien; Trouilh, Lidwine; Esquerré, Diane; Barbieri, Johanna; Klopp, Christophe; Philippe, Romain; Blanquet, Véronique; Boichard, Didier; Rocha, Dominique; Boussaha, Mekki

2017-10-24

Copy number variations (CNV) are known to play a major role in genetic variability and disease pathogenesis in several species including cattle. In this study, we report the identification and characterization of CNV in eight French beef and dairy breeds using whole-genome sequence data from 200 animals. Bioinformatics analyses to search for CNV were carried out using four different but complementary tools and we validated a subset of the CNV by both in silico and experimental approaches. We report the identification and localization of 4178 putative deletion-only, duplication-only and CNV regions, which cover 6% of the bovine autosomal genome; they were validated by two in silico approaches and/or experimentally validated using array-based comparative genomic hybridization and single nucleotide polymorphism genotyping arrays. The size of these variants ranged from 334 bp to 7.7 Mb, with an average size of ~ 54 kb. Of these 4178 variants, 3940 were deletions, 67 were duplications and 171 corresponded to both deletions and duplications, which were defined as potential CNV regions. Gene content analysis revealed that, among these variants, 1100 deletions and duplications encompassed 1803 known genes, which affect a wide spectrum of molecular functions, and 1095 overlapped with known QTL regions. Our study is a large-scale survey of CNV in eight French dairy and beef breeds. These CNV will be useful to study the link between genetic variability and economically important traits, and to improve our knowledge on the genomic architecture of cattle.

Finite-analytic numerical solution of heat transfer in two-dimensional cavity flow

NASA Technical Reports Server (NTRS)

Chen, C.-J.; Naseri-Neshat, H.; Ho, K.-S.

1981-01-01

Heat transfer in cavity flow is numerically analyzed by a new numerical method called the finite-analytic method. The basic idea of the finite-analytic method is the incorporation of local analytic solutions in the numerical solutions of linear or nonlinear partial differential equations. In the present investigation, the local analytic solutions for temperature, stream function, and vorticity distributions are derived. When the local analytic solution is evaluated at a given nodal point, it gives an algebraic relationship between a nodal value in a subregion and its neighboring nodal points. A system of algebraic equations is solved to provide the numerical solution of the problem. The finite-analytic method is used to solve heat transfer in the cavity flow at high Reynolds number (1000) for Prandtl numbers of 0.1, 1, and 10.

Analytical study of magnetohydrodynamic propulsion stability

NASA Astrophysics Data System (ADS)

Abdollahzadeh Jamalabadi, M. Y.

2014-09-01

In this paper an analytical solution for the stability of the fully developed flow drive in a magneto-hydro-dynamic pump with pulsating transverse Eletro-magnetic fields is presented. To do this, a theoretical model of the flow is developed and the analytical results are obtained for both the cylindrical and Cartesian configurations that are proper to use in the propulsion of marine vessels. The governing parabolic momentum PDEs are transformed into an ordinary differential equation using approximate velocity distribution. The numerical results are obtained and asymptotic analyses are built to discover the mathematical behavior of the solutions. The maximum velocity in a magneto-hydro-dynamic pump versus time for various values of the Stuart number, electro-magnetic interaction number, Reynolds number, aspect ratio, as well as the magnetic and electrical angular frequency and the shift of the phase angle is presented. Results show that for a high Stuart number there is a frequency limit for stability of the fluid flow in a certain direction of the flow. This stability frequency is dependent on the geometric parameters of a channel.

Modeling of the Global Water Cycle - Analytical Models

Treesearch

Yongqiang Liu; Roni Avissar

2005-01-01

Both numerical and analytical models of coupled atmosphere and its underlying ground components (land, ocean, ice) are useful tools for modeling the global and regional water cycle. Unlike complex three-dimensional climate models, which need very large computing resources and involve a large number of complicated interactions often difficult to interpret, analytical...

Tiered analytics for purity assessment of macrocyclic peptides in drug discovery: Analytical consideration and method development.

PubMed

Qian Cutrone, Jingfang Jenny; Huang, Xiaohua Stella; Kozlowski, Edward S; Bao, Ye; Wang, Yingzi; Poronsky, Christopher S; Drexler, Dieter M; Tymiak, Adrienne A

2017-05-10

Synthetic macrocyclic peptides with natural and unnatural amino acids have gained considerable attention from a number of pharmaceutical/biopharmaceutical companies in recent years as a promising approach to drug discovery, particularly for targets involving protein-protein or protein-peptide interactions. Analytical scientists charged with characterizing these leads face multiple challenges including dealing with a class of complex molecules with the potential for multiple isomers and variable charge states and no established standards for acceptable analytical characterization of materials used in drug discovery. In addition, due to the lack of intermediate purification during solid phase peptide synthesis, the final products usually contain a complex profile of impurities. In this paper, practical analytical strategies and methodologies were developed to address these challenges, including a tiered approach to assessing the purity of macrocyclic peptides at different stages of drug discovery. Our results also showed that successful progression and characterization of a new drug discovery modality benefited from active analytical engagement, focusing on fit-for-purpose analyses and leveraging a broad palette of analytical technologies and resources. Copyright © 2017. Published by Elsevier B.V.

Identification of copy number variants in whole-genome data using Reference Coverage Profiles

PubMed Central

Glusman, Gustavo; Severson, Alissa; Dhankani, Varsha; Robinson, Max; Farrah, Terry; Mauldin, Denise E.; Stittrich, Anna B.; Ament, Seth A.; Roach, Jared C.; Brunkow, Mary E.; Bodian, Dale L.; Vockley, Joseph G.; Shmulevich, Ilya; Niederhuber, John E.; Hood, Leroy

2015-01-01

The identification of DNA copy numbers from short-read sequencing data remains a challenge for both technical and algorithmic reasons. The raw data for these analyses are measured in tens to hundreds of gigabytes per genome; transmitting, storing, and analyzing such large files is cumbersome, particularly for methods that analyze several samples simultaneously. We developed a very efficient representation of depth of coverage (150–1000× compression) that enables such analyses. Current methods for analyzing variants in whole-genome sequencing (WGS) data frequently miss copy number variants (CNVs), particularly hemizygous deletions in the 1–100 kb range. To fill this gap, we developed a method to identify CNVs in individual genomes, based on comparison to joint profiles pre-computed from a large set of genomes. We analyzed depth of coverage in over 6000 high quality (>40×) genomes. The depth of coverage has strong sequence-specific fluctuations only partially explained by global parameters like %GC. To account for these fluctuations, we constructed multi-genome profiles representing the observed or inferred diploid depth of coverage at each position along the genome. These Reference Coverage Profiles (RCPs) take into account the diverse technologies and pipeline versions used. Normalization of the scaled coverage to the RCP followed by hidden Markov model (HMM) segmentation enables efficient detection of CNVs and large deletions in individual genomes. Use of pre-computed multi-genome coverage profiles improves our ability to analyze each individual genome. We make available RCPs and tools for performing these analyses on personal genomes. We expect the increased sensitivity and specificity for individual genome analysis to be critical for achieving clinical-grade genome interpretation. PMID:25741365

Effect of finite particle number sampling on baryon number fluctuations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Steinheimer, Jan; Koch, Volker

The effects of finite particle number sampling on the net baryon number cumulants, extracted from fluid dynamical simulations, are studied. The commonly used finite particle number sampling procedure introduces an additional Poissonian (or multinomial if global baryon number conservation is enforced) contribution which increases the extracted moments of the baryon number distribution. If this procedure is applied to a fluctuating fluid dynamics framework, one severely overestimates the actual cumulants. We show that the sampling of so-called test particles suppresses the additional contribution to the moments by at least one power of the number of test particles. We demonstrate this methodmore » in a numerical fluid dynamics simulation that includes the effects of spinodal decomposition due to a first-order phase transition. Furthermore, in the limit where antibaryons can be ignored, we derive analytic formulas which capture exactly the effect of particle sampling on the baryon number cumulants. These formulas may be used to test the various numerical particle sampling algorithms.« less

Effect of finite particle number sampling on baryon number fluctuations

DOE PAGES

Steinheimer, Jan; Koch, Volker

2017-09-28

The effects of finite particle number sampling on the net baryon number cumulants, extracted from fluid dynamical simulations, are studied. The commonly used finite particle number sampling procedure introduces an additional Poissonian (or multinomial if global baryon number conservation is enforced) contribution which increases the extracted moments of the baryon number distribution. If this procedure is applied to a fluctuating fluid dynamics framework, one severely overestimates the actual cumulants. We show that the sampling of so-called test particles suppresses the additional contribution to the moments by at least one power of the number of test particles. We demonstrate this methodmore » in a numerical fluid dynamics simulation that includes the effects of spinodal decomposition due to a first-order phase transition. Furthermore, in the limit where antibaryons can be ignored, we derive analytic formulas which capture exactly the effect of particle sampling on the baryon number cumulants. These formulas may be used to test the various numerical particle sampling algorithms.« less

49 CFR 229.105 - Steam generator number.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Steam generator number. 229.105 Section 229.105..., DEPARTMENT OF TRANSPORTATION RAILROAD LOCOMOTIVE SAFETY STANDARDS Safety Requirements Steam Generators § 229.105 Steam generator number. An identification number shall be marked on the steam generator's...

Identification of copy number variants in horses.

PubMed

Doan, Ryan; Cohen, Noah; Harrington, Jessica; Veazey, Kylee; Veazy, Kylee; Juras, Rytis; Cothran, Gus; McCue, Molly E; Skow, Loren; Dindot, Scott V

2012-05-01

Copy number variants (CNVs) represent a substantial source of genetic variation in mammals. However, the occurrence of CNVs in horses and their subsequent impact on phenotypic variation is unknown. We performed a study to identify CNVs in 16 horses representing 15 distinct breeds (Equus caballus) and an individual gray donkey (Equus asinus) using a whole-exome tiling array and the array comparative genomic hybridization methodology. We identified 2368 CNVs ranging in size from 197 bp to 3.5 Mb. Merging identical CNVs from each animal yielded 775 CNV regions (CNVRs), involving 1707 protein- and RNA-coding genes. The number of CNVs per animal ranged from 55 to 347, with median and mean sizes of CNVs of 5.3 kb and 99.4 kb, respectively. Approximately 6% of the genes investigated were affected by a CNV. Biological process enrichment analysis indicated CNVs primarily affected genes involved in sensory perception, signal transduction, and metabolism. CNVs also were identified in genes regulating blood group antigens, coat color, fecundity, lactation, keratin formation, neuronal homeostasis, and height in other species. Collectively, these data are the first report of copy number variation in horses and suggest that CNVs are common in the horse genome and may modulate biological processes underlying different traits observed among horses and horse breeds.

"I want to be a daddy!": meanings of masculine identifications in girls.

PubMed

Rees, K

1987-07-01

This paper suggests revisions in our understanding of feminine identity formation, the girl's negative oedipus complex, and masculine identifications in girls. Analytic material from the cases of three girls is used to explore the various origins and intrapsychic functions of masculine identifications at each phase of the girl's development. Accounts of feminine development based on such concepts as castration shock, primary femininity, primary identification with mother, or core gender identity are seen as oversimplified. Feminine and masculine identifications are neither primary nor secondary, but the product of a long line of development, of ongoing conflict resolution, and of defensive transformations.

Parachute-deployment-parameter identification based on an analytical simulation of Viking BLDT AV-4

NASA Technical Reports Server (NTRS)

Talay, T. A.

1974-01-01

A six-degree-of-freedom analytical simulation of parachute deployment dynamics developed at the Langley Research Center is presented. A comparison study was made using flight results from the Viking Balloon Launched Decelerator Test (BLDT) AV-4. Since there are significant voids in the knowledge of vehicle and decelerator aerodynamics and suspension system physical properties, a set of deployment-parameter input has been defined which may be used as a basis for future studies of parachute deployment dynamics. The study indicates the analytical model is sufficiently sophisticated to investigate parachute deployment dynamics with reasonable accuracy.

Creating analytically divergence-free velocity fields from grid-based data

NASA Astrophysics Data System (ADS)

Ravu, Bharath; Rudman, Murray; Metcalfe, Guy; Lester, Daniel R.; Khakhar, Devang V.

2016-10-01

We present a method, based on B-splines, to calculate a C2 continuous analytic vector potential from discrete 3D velocity data on a regular grid. A continuous analytically divergence-free velocity field can then be obtained from the curl of the potential. This field can be used to robustly and accurately integrate particle trajectories in incompressible flow fields. Based on the method of Finn and Chacon (2005) [10] this new method ensures that the analytic velocity field matches the grid values almost everywhere, with errors that are two to four orders of magnitude lower than those of existing methods. We demonstrate its application to three different problems (each in a different coordinate system) and provide details of the specifics required in each case. We show how the additional accuracy of the method results in qualitatively and quantitatively superior trajectories that results in more accurate identification of Lagrangian coherent structures.

Liquid chromatography/mass spectrometry and liquid chromatography/nuclear magnetic resonance as complementary analytical techniques for unambiguous identification of polymethoxylated flavones in residues from molecular distillation of orange peel oils (Citrus sinensis).

PubMed

Weber, Berthold; Hartmann, Beate; Stöckigt, Detlef; Schreiber, Klaus; Roloff, Michael; Bertram, Heinz-Jürgen; Schmidt, Claus O

2006-01-25

Liquid chromatography/mass spectrometry and liquid chromatography/nuclear magnetic resonance techniques with ultraviolet/diode array detection were used as complementary analytical tools for the reliable identification of polymethoxylated flavones in residues from molecular distillation of cold-pressed peel oils of Citrus sinensis. After development of a liquid chromatographic separation procedure, the presence of several polymethoxy flavones such as sinensetin, nobiletin, tangeretin, quercetogetin, heptamethoxyflavone, and other derivatives was unambiguously confirmed. In addition, proceranone, an acetylated tetranortriterpenoid with limonoid structure, was identified for the first time in citrus.

Pharmaceutical metabolites in the environment: analytical challenges and ecological risks.

PubMed

Celiz, Mary D; Tso, Jerry; Aga, Diana S

2009-12-01

The occurrence of human and veterinary pharmaceuticals in the environment has been a subject of concern for the past decade because many of these emerging contaminants have been shown to persist in soil and water. Although recent studies indicate that pharmaceutical contaminants can pose long-term ecological risks, many of the investigations regarding risk assessment have only considered the ecotoxicity of the parent drug, with very little attention given to the potential contributions that metabolites may have. The scarcity of available environmental data on the human metabolites excreted into the environment or the microbial metabolites formed during environmental biodegradation of pharmaceutical residues can be attributed to the difficulty in analyzing trace amounts of previously unknown compounds in complex sample matrices. However, with the advent of highly sensitive and powerful analytical instrumentations that have become available commercially, it is likely that an increased number of pharmaceutical metabolites will be identified and included in environmental risk assessment. The present study will present a critical review of available literature on pharmaceutical metabolites, primarily focusing on their analysis and toxicological significance. It is also intended to provide an overview on the recent advances in analytical tools and strategies to facilitate metabolite identification in environmental samples. This review aims to provide insight on what future directions might be taken to help scientists in this challenging task of enhancing the available data on the fate, behavior, and ecotoxicity of pharmaceutical metabolites in the environment.

Forced degradation and impurity profiling: recent trends in analytical perspectives.

PubMed

Jain, Deepti; Basniwal, Pawan Kumar

2013-12-01

This review describes an epigrammatic impression of the recent trends in analytical perspectives of degradation and impurities profiling of pharmaceuticals including active pharmaceutical ingredient (API) as well as drug products during 2008-2012. These recent trends in forced degradation and impurity profiling were discussed on the head of year of publication; columns, matrix (API and dosage forms) and type of elution in chromatography (isocratic and gradient); therapeutic categories of the drug which were used for analysis. It focuses distinctly on comprehensive update of various analytical methods including hyphenated techniques for the identification and quantification of thresholds of impurities and degradants in different pharmaceutical matrices. © 2013 Elsevier B.V. All rights reserved.

Direct analysis in real time mass spectrometry and multivariate data analysis: a novel approach to rapid identification of analytical markers for quality control of traditional Chinese medicine preparation.

PubMed

Zeng, Shanshan; Wang, Lu; Chen, Teng; Wang, Yuefei; Mo, Huanbiao; Qu, Haibin

2012-07-06

The paper presents a novel strategy to identify analytical markers of traditional Chinese medicine preparation (TCMP) rapidly via direct analysis in real time mass spectrometry (DART-MS). A commonly used TCMP, Danshen injection, was employed as a model. The optimal analysis conditions were achieved by measuring the contribution of various experimental parameters to the mass spectra. Salvianolic acids and saccharides were simultaneously determined within a single 1-min DART-MS run. Furthermore, spectra of Danshen injections supplied by five manufacturers were processed with principal component analysis (PCA). Obvious clustering was observed in the PCA score plot, and candidate markers were recognized from the contribution plots of PCA. The suitability of potential markers was then confirmed by contrasting with the results of traditional analysis methods. Using this strategy, fructose, glucose, sucrose, protocatechuic aldehyde and salvianolic acid A were rapidly identified as the markers of Danshen injections. The combination of DART-MS with PCA provides a reliable approach to the identification of analytical markers for quality control of TCMP. Copyright © 2012 Elsevier B.V. All rights reserved.

Using predictive analytics and big data to optimize pharmaceutical outcomes.

PubMed

Hernandez, Inmaculada; Zhang, Yuting

2017-09-15

The steps involved, the resources needed, and the challenges associated with applying predictive analytics in healthcare are described, with a review of successful applications of predictive analytics in implementing population health management interventions that target medication-related patient outcomes. In healthcare, the term big data typically refers to large quantities of electronic health record, administrative claims, and clinical trial data as well as data collected from smartphone applications, wearable devices, social media, and personal genomics services; predictive analytics refers to innovative methods of analysis developed to overcome challenges associated with big data, including a variety of statistical techniques ranging from predictive modeling to machine learning to data mining. Predictive analytics using big data have been applied successfully in several areas of medication management, such as in the identification of complex patients or those at highest risk for medication noncompliance or adverse effects. Because predictive analytics can be used in predicting different outcomes, they can provide pharmacists with a better understanding of the risks for specific medication-related problems that each patient faces. This information will enable pharmacists to deliver interventions tailored to patients' needs. In order to take full advantage of these benefits, however, clinicians will have to understand the basics of big data and predictive analytics. Predictive analytics that leverage big data will become an indispensable tool for clinicians in mapping interventions and improving patient outcomes. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

On using the Hilbert transform for blind identification of complex modes: A practical approach

NASA Astrophysics Data System (ADS)

Antunes, Jose; Debut, Vincent; Piteau, Pilippe; Delaune, Xavier; Borsoi, Laurent

2018-01-01

The modal identification of dynamical systems under operational conditions, when subjected to wide-band unmeasured excitations, is today a viable alternative to more traditional modal identification approaches based on processing sets of measured FRFs or impulse responses. Among current techniques for performing operational modal identification, the so-called blind identification methods are the subject of considerable investigation. In particular, the SOBI (Second-Order Blind Identification) method was found to be quite efficient. SOBI was originally developed for systems with normal modes. To address systems with complex modes, various extension approaches have been proposed, in particular: (a) Using a first-order state-space formulation for the system dynamics; (b) Building complex analytic signals from the measured responses using the Hilbert transform. In this paper we further explore the latter option, which is conceptually interesting while preserving the model order and size. Focus is on applicability of the SOBI technique for extracting the modal responses from analytic signals built from a set of vibratory responses. The novelty of this work is to propose a straightforward computational procedure for obtaining the complex cross-correlation response matrix to be used for the modal identification procedure. After clarifying subtle aspects of the general theoretical framework, we demonstrate that the correlation matrix of the analytic responses can be computed through a Hilbert transform of the real correlation matrix, so that the actual time-domain responses are no longer required for modal identification purposes. The numerical validation of the proposed technique is presented based on time-domain simulations of a conceptual physical multi-modal system, designed to display modes ranging from normal to highly complex, while keeping modal damping low and nearly independent of the modal complexity, and which can prove very interesting in test bench

A Generalized Approach to Forensic Dye Identification: Development and Utility of Reference Libraries.

PubMed

Groves, Ethan; Palenik, Skip; Palenik, Christopher S

2018-04-18

While color is arguably the most important optical property of evidential fibers, the actual dyestuffs responsible for its expression in them are, in forensic trace evidence examinations, rarely analyzed and still less often identified. This is due, primarily, to the exceedingly small quantities of dye present in a single fiber as well as to the fact that dye identification is a challenging analytical problem, even when large quantities are available for analysis. Among the practical reasons for this are the wide range of dyestuffs available (and the even larger number of trade names), the low total concentration of dyes in the finished product, the limited amount of sample typically available for analysis in forensic cases, and the complexity of the dye mixtures that may exist within a single fiber. Literature on the topic of dye analysis is often limited to a specific method, subset of dyestuffs, or an approach that is not applicable given the constraints of a forensic analysis. Here, we present a generalized approach to dye identification that ( 1 ) combines several robust analytical methods, ( 2 ) is broadly applicable to a wide range of dye chemistries, application classes, and fiber types, and ( 3 ) can be scaled down to forensic casework-sized samples. The approach is based on the development of a reference collection of 300 commercially relevant textile dyes that have been characterized by a variety of microanalytical methods (HPTLC, Raman microspectroscopy, infrared microspectroscopy, UV-Vis spectroscopy, and visible microspectrophotometry). Although there is no single approach that is applicable to all dyes on every type of fiber, a combination of these analytical methods has been applied using a reproducible approach that permits the use of reference libraries to constrain the identity of and, in many cases, identify the dye (or dyes) present in a textile fiber sample.

47 CFR 95.119 - Station identification.

Code of Federal Regulations, 2013 CFR

2013-10-01

... station identification is the call sign assigned to the GMRS station or system. (c) A unit number may be... 47 Telecommunication 5 2013-10-01 2013-10-01 false Station identification. 95.119 Section 95.119... SERVICES General Mobile Radio Service (GMRS) § 95.119 Station identification. (a) Except as provided in...

47 CFR 95.119 - Station identification.

Code of Federal Regulations, 2012 CFR

2012-10-01

... station identification is the call sign assigned to the GMRS station or system. (c) A unit number may be... 47 Telecommunication 5 2012-10-01 2012-10-01 false Station identification. 95.119 Section 95.119... SERVICES General Mobile Radio Service (GMRS) § 95.119 Station identification. (a) Except as provided in...

47 CFR 95.119 - Station identification.

Code of Federal Regulations, 2011 CFR

2011-10-01

... station identification is the call sign assigned to the GMRS station or system. (c) A unit number may be... 47 Telecommunication 5 2011-10-01 2011-10-01 false Station identification. 95.119 Section 95.119... SERVICES General Mobile Radio Service (GMRS) § 95.119 Station identification. (a) Except as provided in...

47 CFR 95.119 - Station identification.

Code of Federal Regulations, 2014 CFR

2014-10-01

... station identification is the call sign assigned to the GMRS station or system. (c) A unit number may be... 47 Telecommunication 5 2014-10-01 2014-10-01 false Station identification. 95.119 Section 95.119... SERVICES General Mobile Radio Service (GMRS) § 95.119 Station identification. (a) Except as provided in...

Pushing the Limits of MALDI-TOF Mass Spectrometry: Beyond Fungal Species Identification

PubMed Central

Rizzato, Cosmeri; Lombardi, Lisa; Zoppo, Marina; Lupetti, Antonella; Tavanti, Arianna

2015-01-01

Matrix assisted laser desorption ionization time of flight (MALDI-TOF) is a powerful analytical tool that has revolutionized microbial identification. Routinely used for bacterial identification, MALDI-TOF has recently been applied to both yeast and filamentous fungi, confirming its pivotal role in the rapid and reliable diagnosis of infections. Subspecies-level identification holds an important role in epidemiological investigations aimed at tracing virulent or drug resistant clones. This review focuses on present and future applications of this versatile tool in the clinical mycology laboratory. PMID:29376916

Reliable dual-redundant sensor failure detection and identification for the NASA F-8 DFBW aircraft

NASA Technical Reports Server (NTRS)

Deckert, J. C.; Desai, M. N.; Deyst, J. J., Jr.; Willsky, A. S.

1978-01-01

A technique was developed which provides reliable failure detection and identification (FDI) for a dual redundant subset of the flight control sensors onboard the NASA F-8 digital fly by wire (DFBW) aircraft. The technique was successfully applied to simulated sensor failures on the real time F-8 digital simulator and to sensor failures injected on telemetry data from a test flight of the F-8 DFBW aircraft. For failure identification the technique utilized the analytic redundancy which exists as functional and kinematic relationships among the various quantities being measured by the different control sensor types. The technique can be used not only in a dual redundant sensor system, but also in a more highly redundant system after FDI by conventional voting techniques reduced to two the number of unfailed sensors of a particular type. In addition the technique can be easily extended to the case in which only one sensor of a particular type is available.

Identification of drought in Dhalai river watershed using MCDM and ANN models

NASA Astrophysics Data System (ADS)

Aher, Sainath; Shinde, Sambhaji; Guha, Shantamoy; Majumder, Mrinmoy

2017-03-01

An innovative approach for drought identification is developed using Multi-Criteria Decision Making (MCDM) and Artificial Neural Network (ANN) models from surveyed drought parameter data around the Dhalai river watershed in Tripura hinterlands, India. Total eight drought parameters, i.e., precipitation, soil moisture, evapotranspiration, vegetation canopy, cropping pattern, temperature, cultivated land, and groundwater level were obtained from expert, literature and cultivator survey. Then, the Analytic Hierarchy Process (AHP) and Analytic Network Process (ANP) were used for weighting of parameters and Drought Index Identification (DII). Field data of weighted parameters in the meso scale Dhalai River watershed were collected and used to train the ANN model. The developed ANN model was used in the same watershed for identification of drought. Results indicate that the Limited-Memory Quasi-Newton algorithm was better than the commonly used training method. Results obtained from the ANN model shows the drought index developed from the study area ranges from 0.32 to 0.72. Overall analysis revealed that, with appropriate training, the ANN model can be used in the areas where the model is calibrated, or other areas where the range of input parameters is similar to the calibrated region for drought identification.

Prevalence of Pre-Analytical Errors in Clinical Chemistry Diagnostic Labs in Sulaimani City of Iraqi Kurdistan

PubMed Central

2017-01-01

Background Laboratory testing is roughly divided into three phases: a pre-analytical phase, an analytical phase and a post-analytical phase. Most analytical errors have been attributed to the analytical phase. However, recent studies have shown that up to 70% of analytical errors reflect the pre-analytical phase. The pre-analytical phase comprises all processes from the time a laboratory request is made by a physician until the specimen is analyzed at the lab. Generally, the pre-analytical phase includes patient preparation, specimen transportation, specimen collection and storage. In the present study, we report the first comprehensive assessment of the frequency and types of pre-analytical errors at the Sulaimani diagnostic labs in Iraqi Kurdistan. Materials and Methods Over 2 months, 5500 venous blood samples were observed in 10 public diagnostic labs of Sulaimani City. The percentages of rejected samples and types of sample inappropriateness were evaluated. The percentage of each of the following pre-analytical errors were recorded: delay in sample transportation, clotted samples, expired reagents, hemolyzed samples, samples not on ice, incorrect sample identification, insufficient sample, tube broken in centrifuge, request procedure errors, sample mix-ups, communication conflicts, misinterpreted orders, lipemic samples, contaminated samples and missed physician’s request orders. The difference between the relative frequencies of errors observed in the hospitals considered was tested using a proportional Z test. In particular, the survey aimed to discover whether analytical errors were recorded and examine the types of platforms used in the selected diagnostic labs. Results The analysis showed a high prevalence of improper sample handling during the pre-analytical phase. In appropriate samples, the percentage error was as high as 39%. The major reasons for rejection were hemolyzed samples (9%), incorrect sample identification (8%) and clotted samples (6

Molecular Identification of the Schwannomatosis Locus

DTIC Science & Technology

2004-07-01

AD Award Number: DAMD17-03-1-0445 TITLE: Molecular Identification of the Schwannomatosis Locus PRINCIPAL INVESTIGATOR: Mia M. MacCollin, M.D...COVERED (Leave blank) July 2004 Annual (1 Jul 2003 - 30 Jun 2004) 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS Molecular Identification of the Schwannomatosis ...DISTRIBUTION CODE Approved for Public Release; Distribution Unlimited 13. ABSTRACT (Maximum 200 Words) Background: Schwannomatosis is a recently recognized

Impact of Educational Activities in Reducing Pre-Analytical Laboratory Errors: A quality initiative.

PubMed

Al-Ghaithi, Hamed; Pathare, Anil; Al-Mamari, Sahimah; Villacrucis, Rodrigo; Fawaz, Naglaa; Alkindi, Salam

2017-08-01

Pre-analytic errors during diagnostic laboratory investigations can lead to increased patient morbidity and mortality. This study aimed to ascertain the effect of educational nursing activities on the incidence of pre-analytical errors resulting in non-conforming blood samples. This study was conducted between January 2008 and December 2015. All specimens received at the Haematology Laboratory of the Sultan Qaboos University Hospital, Muscat, Oman, during this period were prospectively collected and analysed. Similar data from 2007 were collected retrospectively and used as a baseline for comparison. Non-conforming samples were defined as either clotted samples, haemolysed samples, use of the wrong anticoagulant, insufficient quantities of blood collected, incorrect/lack of labelling on a sample or lack of delivery of a sample in spite of a sample request. From 2008 onwards, multiple educational training activities directed at the hospital nursing staff and nursing students primarily responsible for blood collection were implemented on a regular basis. After initiating corrective measures in 2008, a progressive reduction in the percentage of non-conforming samples was observed from 2009 onwards. Despite a 127.84% increase in the total number of specimens received, there was a significant reduction in non-conforming samples from 0.29% in 2007 to 0.07% in 2015, resulting in an improvement of 75.86% ( P <0.050). In particular, specimen identification errors decreased by 0.056%, with a 96.55% improvement. Targeted educational activities directed primarily towards hospital nursing staff had a positive impact on the quality of laboratory specimens by significantly reducing pre-analytical errors.

33 CFR 181.35 - Removal of numbers.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 2 2012-07-01 2012-07-01 false Removal of numbers. 181.35...) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.35 Removal of numbers. No person may remove or alter a number required by this subpart unless authorized by the Commandant, U.S. Coast...

33 CFR 181.35 - Removal of numbers.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 2 2014-07-01 2014-07-01 false Removal of numbers. 181.35...) BOATING SAFETY MANUFACTURER REQUIREMENTS Identification of Boats § 181.35 Removal of numbers. No person may remove or alter a number required by this subpart unless authorized by the Commandant, U.S. Coast...

The Development of a New Analytical Model for the Identification of Saccharide Binders in Paint Samples

PubMed Central

Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

2012-01-01

This paper describes a method for reliably identifying saccharide materials in paintings. Since the 3rd millennium B.C., polysaccharide materials such as plant gums, sugar, flour, and honey were used as binding media and sizing agents in paintings, illuminated manuscripts, and polychrome objects. Although it has been reported that plant gums have a stable composition, their identification in paint samples is often doubtful and rarely discussed. Our research was carried out independently at two different laboratories: the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). It was shown in a previous stage of this research that the two methods give highly comparable data when analysing both reference paint samples and paint layers from art objects, thus the combined data was used to build a large database. In this study, the simultaneous presence of proteinaceous binders and pigments in fresh and artificially aged paint replicas was investigated, and it highlighted how these can affect the sugar profile of arabic, tragacanth, and fruit tree gums. The environmental contamination due to sugars from various plant tissues is also discussed. The results allowed the development of a new model for the reliable identification of saccharide binders in paintings based on the evaluation of markers that are stable to ageing and unaffected by pigments. This new model was applied to the sugar profiles obtained from the analysis of a large number of samples from murals, easel paintings, manuscripts, and polychrome objects from different geographical areas and dating from the 13th century BC to the 20th century AD, thus demonstrating its reliability. PMID:23166654

The development of a new analytical model for the identification of saccharide binders in paint samples.

PubMed

Lluveras-Tenorio, Anna; Mazurek, Joy; Restivo, Annalaura; Colombini, Maria Perla; Bonaduce, Ilaria

2012-01-01

This paper describes a method for reliably identifying saccharide materials in paintings. Since the 3(rd) millennium B.C., polysaccharide materials such as plant gums, sugar, flour, and honey were used as binding media and sizing agents in paintings, illuminated manuscripts, and polychrome objects. Although it has been reported that plant gums have a stable composition, their identification in paint samples is often doubtful and rarely discussed. Our research was carried out independently at two different laboratories: the Getty Conservation Institute in Los Angeles, USA (GCI) and the Department of Chemistry and Industrial Chemistry of the University of Pisa, Italy (DCCI). It was shown in a previous stage of this research that the two methods give highly comparable data when analysing both reference paint samples and paint layers from art objects, thus the combined data was used to build a large database. In this study, the simultaneous presence of proteinaceous binders and pigments in fresh and artificially aged paint replicas was investigated, and it highlighted how these can affect the sugar profile of arabic, tragacanth, and fruit tree gums. The environmental contamination due to sugars from various plant tissues is also discussed. The results allowed the development of a new model for the reliable identification of saccharide binders in paintings based on the evaluation of markers that are stable to ageing and unaffected by pigments. This new model was applied to the sugar profiles obtained from the analysis of a large number of samples from murals, easel paintings, manuscripts, and polychrome objects from different geographical areas and dating from the 13(th) century BC to the 20(th) century AD, thus demonstrating its reliability.

78 FR 68817 - Proposed Information Collection; Comment Request; Northeast Region Gear Identification

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-15

... provide vessel and gear identification information (e.g., hull identification number, Federal fishing... submitted to the NMFS as a result of this collection. The vessel's hull identification number or other means...

Analytics for vaccine economics and pricing: insights and observations.

PubMed

Robbins, Matthew J; Jacobson, Sheldon H

2015-04-01

Pediatric immunization programs in the USA are a successful and cost-effective public health endeavor, profoundly reducing mortalities caused by infectious diseases. Two important issues relate to the success of the immunization programs, the selection of cost-effective vaccines and the appropriate pricing of vaccines. The recommended childhood immunization schedule, published annually by the CDC, continues to expand with respect to the number of injections required and the number of vaccines available for selection. The advent of new vaccines to meet the growing requirements of the schedule results: in a large, combinatorial number of possible vaccine formularies. The expansion of the schedule and the increase in the number of available vaccines constitutes a challenge for state health departments, large city immunization programs, private practices and other vaccine purchasers, as a cost-effective vaccine formulary must be selected from an increasingly large set of possible vaccine combinations to satisfy the schedule. The pediatric vaccine industry consists of a relatively small number of pharmaceutical firms engaged in the research, development, manufacture and distribution of pediatric vaccines. The number of vaccine manufacturers has dramatically decreased in the past few decades for a myriad of reasons, most notably due to low profitability. The contraction of the industry negatively impacts the reliable provision of pediatric vaccines. The determination of appropriate vaccine prices is an important issue and influences a vaccine manufacturer's decision to remain in the market. Operations research is a discipline that applies advanced analytical methods to improve decision making; analytics is the application of operations research to a particular problem using pertinent data to provide a practical result. Analytics provides a mechanism to resolve the challenges facing stakeholders in the vaccine development and delivery system, in particular, the selection

Personal identification by eyes.

PubMed

Marinović, Dunja; Njirić, Sanja; Coklo, Miran; Muzić, Vedrana

2011-09-01

Identification of persons through the eyes is in the field of biometrical science. Many security systems are based on biometric methods of personal identification, to determine whether a person is presenting itself truly. The human eye contains an extremely large number of individual characteristics that make it particularly suitable for the process of identifying a person. Today, the eye is considered to be one of the most reliable body parts for human identification. Systems using iris recognition are among the most secure biometric systems.

30 CFR 77.215-1 - Refuse piles; identification.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Refuse piles; identification. 77.215-1 Section... COAL MINES Surface Installations § 77.215-1 Refuse piles; identification. A permanent identification marker, at least six feet high and showing the refuse pile identification number as assigned by the...

Analytical chemistry in the Aegean Sea region: current status.

PubMed

Samanidou, Victoria F

2012-12-01

The Eighth Aegean Analytical Chemistry Days Conference took place in Urla, İzmir, Turkey, from 16-20 September 2012. This conference is held every 2 years, organized alternately by analytical chemistry departments of Turkish and Greek universities, so that analytical chemists from the region around the Aegean Sea can exchange experience and knowledge based on their research in a large number of fields. This report summarizes the most interesting presentations and posters pertaining to bioanalytical work.

48 CFR 204.7202-2 - DUNS numbers.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 3 2011-10-01 2011-10-01 false DUNS numbers. 204.7202-2..., DEPARTMENT OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Contractor Identification 204.7202-2 DUNS numbers. Requirements for use of DUNS numbers are in FAR 4.605(b) and 4.607(a). [74 FR 34265, July 15, 2009] ...

48 CFR 204.7202-2 - DUNS numbers.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 3 2012-10-01 2012-10-01 false DUNS numbers. 204.7202-2..., DEPARTMENT OF DEFENSE GENERAL ADMINISTRATIVE MATTERS Contractor Identification 204.7202-2 DUNS numbers. Requirements for use of DUNS numbers are in FAR 4.605(b) and 4.607(a). [74 FR 34265, July 15, 2009] ...