41 CFR 102-83.95 - After an agency has identified that its geographic service area and delineated area are in an...

Code of Federal Regulations, 2014 CFR

2014-01-01

... identified that its geographic service area and delineated area are in an urban area, what is the next step... Location of Space Urban Areas § 102-83.95 After an agency has identified that its geographic service area... identifies its geographic service area and delineated area within which it wishes to locate specific...

41 CFR 102-83.95 - After an agency has identified that its geographic service area and delineated area are in an...

Code of Federal Regulations, 2011 CFR

2011-01-01

... identified that its geographic service area and delineated area are in an urban area, what is the next step... Location of Space Urban Areas § 102-83.95 After an agency has identified that its geographic service area... identifies its geographic service area and delineated area within which it wishes to locate specific...

13 CFR 307.18 - Addition of lending areas; merger of RLFs.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Additional Lending Area and revise its lending strategy, as necessary; (vi) The RLF Recipient shall execute... conditions reasonably requested by EDA. (2) The New Lending Area designation shall remain in place... Lending Area(s)), its lending strategy and borrower criteria; (iv) Prior to EDA's disbursement of...

Identifying priority areas for ecosystem service management in South African grasslands.

PubMed

Egoh, Benis N; Reyers, Belinda; Rouget, Mathieu; Richardson, David M

2011-06-01

Grasslands provide many ecosystem services required to support human well-being and are home to a diverse fauna and flora. Degradation of grasslands due to agriculture and other forms of land use threaten biodiversity and ecosystem services. Various efforts are underway around the world to stem these declines. The Grassland Programme in South Africa is one such initiative and is aimed at safeguarding both biodiversity and ecosystem services. As part of this developing programme, we identified spatial priority areas for ecosystem services, tested the effect of different target levels of ecosystem services used to identify priority areas, and evaluated whether biodiversity priority areas can be aligned with those for ecosystem services. We mapped five ecosystem services (below ground carbon storage, surface water supply, water flow regulation, soil accumulation and soil retention) and identified priority areas for individual ecosystem services and for all five services at the scale of quaternary catchments. Planning for individual ecosystem services showed that, depending on the ecosystem service of interest, between 4% and 13% of the grassland biome was required to conserve at least 40% of the soil and water services. Thirty-four percent of the biome was needed to conserve 40% of the carbon service in the grassland. Priority areas identified for five ecosystem services under three target levels (20%, 40%, 60% of the total amount) showed that between 17% and 56% of the grassland biome was needed to conserve these ecosystem services. There was moderate to high overlap between priority areas selected for ecosystem services and already-identified terrestrial and freshwater biodiversity priority areas. This level of overlap coupled with low irreplaceability values obtained when planning for individual ecosystem services makes it possible to combine biodiversity and ecosystem services in one plan using systematic conservation planning. Copyright © 2011 Elsevier Ltd. All

Geothermal Target Areas in Colorado as Identified by Remote Sensing Techniques

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains the areas identified as targets of potential geothermal activity. The Criteria used to identify the target areas include: hot/warm surface exposures modeled from ASTER/Landsat satellite imagery and geological characteristics, alteration mineral commonly associated with hot springs (clays, Si, and FeOx) modeled from ASTER and Landsat data, Colorado Geological Survey (CGS) known thermal hot springs/wells and heat-flow data points, Colorado deep-seated fault zones, weakened basement identified from isostatic gravity data, and Colorado sedimentary and topographic characteristics.

Distributed watershed modeling of design storms to identify nonpoint source loading areas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Endreny, T.A.; Wood, E.F.

1999-03-01

Watershed areas that generate nonpoint source (NPS) polluted runoff need to be identified prior to the design of basin-wide water quality projects. Current watershed-scale NPS models lack a variable source area (VSA) hydrology routine, and are therefore unable to identify spatially dynamic runoff zones. The TOPLATS model used a watertable-driven VSA hydrology routine to identify runoff zones in a 17.5 km{sup 2} agricultural watershed in central Oklahoma. Runoff areas were identified in a static modeling framework as a function of prestorm watertable depth and also in a dynamic modeling framework by simulating basin response to 2, 10, and 25 yrmore » return period 6 h design storms. Variable source area expansion occurred throughout the duration of each 6 h storm and total runoff area increased with design storm intensity. Basin-average runoff rates of 1 mm h{sup {minus}1} provided little insight into runoff extremes while the spatially distributed analysis identified saturation excess zones with runoff rates equaling effective precipitation. The intersection of agricultural landcover areas with these saturation excess runoff zones targeted the priority potential NPS runoff zones that should be validated with field visits. These intersected areas, labeled as potential NPS runoff zones, were mapped within the watershed to demonstrate spatial analysis options available in TOPLATS for managing complex distributions of watershed runoff. TOPLATS concepts in spatial saturation excess runoff modelling should be incorporated into NPS management models.« less

Cochrane Acute Respiratory Infections Group's Stakeholder Engagement Project identified systematic review priority areas.

PubMed

Scott, Anna Mae; Clark, Justin; Dooley, Liz; Jones, Ann; Jones, Mark; Del Mar, Chris

2018-05-22

Cochrane Acute Respiratory Infections (ARI) Group conducts systematic reviews of the evidence for treatment and prevention of ARIs. We report the results of a prioritisation project, aiming to identify highest priority systematic review topics. The project consisted of 2 Phases. Phase 1 analysed the gap between existing RCTs and Cochrane Systematic Reviews (reported previously). Phase 2 (reported here) consisted of a two-round survey. In round 1, respondents prioritised 68 topics and suggested up to 10 additional topics; in Round 2, respondents prioritised top 25 topics from Round 1. Respondents included clinicians, researchers, systematic reviewers, allied health, patients, and carers, from 33 different countries. In Round 1, 154 respondents identified 20 priority topics, most commonly selecting topics in non-specific ARIs, influenza, and common cold. 50 respondents also collectively suggested 134 additional topics. In Round 2, 78 respondents prioritised top 25 topics, most commonly in the areas of non-specific ARIs, pneumonia and influenza. We generated a list of priority systematic review topics, to guide the Cochrane ARI Group's systematic review work for the next 24 months. Stakeholder involvement enhanced the transparency of the process, and will increase the usability and relevance of the Group's work to stakeholders. Copyright © 2018 Elsevier Inc. All rights reserved.

43 CFR 423.12 - How will Reclamation notify the public of additional closed areas?

Code of Federal Regulations, 2011 CFR

2011-10-01

... additional closed areas? 423.12 Section 423.12 Public Lands: Interior Regulations Relating to Public Lands..., LANDS, AND WATERBODIES Areas Open and Closed to Public Use § 423.12 How will Reclamation notify the public of additional closed areas? (a) Non-emergency situations. In non-emergency situations, an...

43 CFR 423.12 - How will Reclamation notify the public of additional closed areas?

Code of Federal Regulations, 2010 CFR

2010-10-01

... additional closed areas? 423.12 Section 423.12 Public Lands: Interior Regulations Relating to Public Lands..., LANDS, AND WATERBODIES Areas Open and Closed to Public Use § 423.12 How will Reclamation notify the public of additional closed areas? (a) Non-emergency situations. In non-emergency situations, an...

78 FR 63369 - Gypsy Moth Generally Infested Areas; Additions in Wisconsin

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-24

.... APHIS-2012-0075] Gypsy Moth Generally Infested Areas; Additions in Wisconsin AGENCY: Animal and Plant... Wisconsin to the list of generally infested areas based on the detection of infestations of gypsy moth in...- 0075), we amended Sec. 301.45-3(a) by adding portions of Wisconsin to the list of generally infested...

Satellite Earth observation data to identify anthropogenic pressures in selected protected areas

NASA Astrophysics Data System (ADS)

Nagendra, Harini; Mairota, Paola; Marangi, Carmela; Lucas, Richard; Dimopoulos, Panayotis; Honrado, João Pradinho; Niphadkar, Madhura; Mücher, Caspar A.; Tomaselli, Valeria; Panitsa, Maria; Tarantino, Cristina; Manakos, Ioannis; Blonda, Palma

2015-05-01

useful in connection with EO data analysis. We provide detailed examples for two protected areas, demonstrating the use of EO data for detection of land cover/habitat change, coupled with expert interpretation to relate such change to specific anthropogenic pressures. We conclude with a discussion of the limitations and feasibility of using EO data and techniques to identify anthropogenic pressures, suggesting additional research efforts required in this direction.

ANTHROPOMETRY TO IDENTIFY HIGH VISCERAL FAT AREA IN POSTMENOPAUSAL WOMEN.

PubMed

Gondim Pitanga, Francisco José; Seara Pitanga, Cristiano Penas; Calçada Dias Gabriel, Ronaldo Eugénio; Cristina Beck, Carmem; Rodrigues Moreira, Maria Helena

2015-12-01

the evaluation of the body fat distribution by anthropometry can serve to identify excess visceral fat. This diagnosis will enable implementation of specific measures to both prevent and treat excess visceral fat in postmenopausal women. the aim of this study was to analyze different anthropometric indicators and identify the best cutoff points to discriminate subjects with high visceral fat area (HVFA) in postmenopausal women. cross-sectional study with a sample of 255 postmenopausal women. Different Receiver Operating Characteristic (ROC) curves were constructed and the areas under them compared in terms of the conicity index (C-index), body mass index (BMI), waist-to-hip ratio (WHR), waist circumference (WC), weight-to-height ratio (WHtR) and HVFA. Sensitivity and specificity identified the best cutoff points between the different anthropometric indicators in order to discriminate subjects with HVFA. The confidence interval was set at 95%. statistically significant areas under the ROC curve were found for all anthropometric indicators analyzed. The following cutoff points, with their respective sensitivities and specificities to discriminate subjects with HVFA, were suggested: C-index (1.19; 75.00%- 74.77%); BMI (27.3 kg/m2; 81.08%-80.37%); WHR (0.98; 90.54%-83.18%); WC (85 cm; 85.14%-81.31%); and WHtR (0.55; 80.41%-80.37%). these results demonstrate that anthropometric indicators identify HVFA well in postmenopausal women and can be used instead of more sophisticated exams to detect high levels of visceral fat. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

Carboxylator: incorporating solvent-accessible surface area for identifying protein carboxylation sites

NASA Astrophysics Data System (ADS)

Lu, Cheng-Tsung; Chen, Shu-An; Bretaña, Neil Arvin; Cheng, Tzu-Hsiu; Lee, Tzong-Yi

2011-10-01

In proteins, glutamate (Glu) residues are transformed into γ-carboxyglutamate (Gla) residues in a process called carboxylation. The process of protein carboxylation catalyzed by γ-glutamyl carboxylase is deemed to be important due to its involvement in biological processes such as blood clotting cascade and bone growth. There is an increasing interest within the scientific community to identify protein carboxylation sites. However, experimental identification of carboxylation sites via mass spectrometry-based methods is observed to be expensive, time-consuming, and labor-intensive. Thus, we were motivated to design a computational method for identifying protein carboxylation sites. This work aims to investigate the protein carboxylation by considering the composition of amino acids that surround modification sites. With the implication of a modified residue prefers to be accessible on the surface of a protein, the solvent-accessible surface area (ASA) around carboxylation sites is also investigated. Radial basis function network is then employed to build a predictive model using various features for identifying carboxylation sites. Based on a five-fold cross-validation evaluation, a predictive model trained using the combined features of amino acid sequence (AA20D), amino acid composition, and ASA, yields the highest accuracy at 0.874. Furthermore, an independent test done involving data not included in the cross-validation process indicates that in silico identification is a feasible means of preliminary analysis. Additionally, the predictive method presented in this work is implemented as Carboxylator (http://csb.cse.yzu.edu.tw/Carboxylator/), a web-based tool for identifying carboxylated proteins with modification sites in order to help users in investigating γ-glutamyl carboxylation.

Scale-dependent complementarity of climatic velocity and environmental diversity for identifying priority areas for conservation under climate change.

PubMed

Carroll, Carlos; Roberts, David R; Michalak, Julia L; Lawler, Joshua J; Nielsen, Scott E; Stralberg, Diana; Hamann, Andreas; Mcrae, Brad H; Wang, Tongli

2017-11-01

As most regions of the earth transition to altered climatic conditions, new methods are needed to identify refugia and other areas whose conservation would facilitate persistence of biodiversity under climate change. We compared several common approaches to conservation planning focused on climate resilience over a broad range of ecological settings across North America and evaluated how commonalities in the priority areas identified by different methods varied with regional context and spatial scale. Our results indicate that priority areas based on different environmental diversity metrics differed substantially from each other and from priorities based on spatiotemporal metrics such as climatic velocity. Refugia identified by diversity or velocity metrics were not strongly associated with the current protected area system, suggesting the need for additional conservation measures including protection of refugia. Despite the inherent uncertainties in predicting future climate, we found that variation among climatic velocities derived from different general circulation models and emissions pathways was less than the variation among the suite of environmental diversity metrics. To address uncertainty created by this variation, planners can combine priorities identified by alternative metrics at a single resolution and downweight areas of high variation between metrics. Alternately, coarse-resolution velocity metrics can be combined with fine-resolution diversity metrics in order to leverage the respective strengths of the two groups of metrics as tools for identification of potential macro- and microrefugia that in combination maximize both transient and long-term resilience to climate change. Planners should compare and integrate approaches that span a range of model complexity and spatial scale to match the range of ecological and physical processes influencing persistence of biodiversity and identify a conservation network resilient to threats operating at

Identifying key areas for active interprofessional learning partnerships: A facilitated dialogue.

PubMed

Steven, Kathryn; Angus, Allyson; Breckenridge, Jenna; Davey, Peter; Tully, Vicki; Muir, Fiona

2016-11-01

Student and service user involvement is recognised as an important factor in creating interprofessional education (IPE) opportunities. We used a team-based learning approach to bring together undergraduate health professional students, early career professionals (ECPs), public partners, volunteers, and carers to explore learning partnerships. Influenced by evaluative inquiry, this qualitative study used a free text response to allow participants to give their own opinion. A total of 153 participants (50 public partners and 103 students and professionals representing 11 healthcare professions) took part. Participants were divided into mixed groups of six (n = 25) and asked to identify areas where students, professionals, and public could work together to improve health professional education. Each group documented their discussions by summarising agreed areas and next steps. Responses were collected and transcribed for inductive content analysis. Seven key themes (areas for joint working) were identified: communication, public as partners, standards of conduct, IPE, quality improvement, education, and learning environments. The team-based learning format enabled undergraduate and postgraduate health professionals to achieve consensus with public partners on areas for IPE and collaboration. Some of our results may be context-specific but the approach is generalisable to other areas.

Identifying areas of need relative to liver disease: geographic clustering within a health service district.

PubMed

El-Atem, Nathan; Irvine, Katharine M; Valery, Patricia C; Wojcik, Kyle; Horsfall, Leigh; Johnson, Tracey; Janda, Monika; McPhail, Steven M; Powell, Elizabeth E

2017-08-01

accessing tertiary hospital liver services are clustered within specific geographic areas. The most striking geographic clustering was seen for people living with chronic hepatitis B, in regions with a relatively high proportion of people born in Vietnam and China. In addition to ethnicity, the data show an apparent ecological association between liver disease and both socioeconomic and educational and/or occupational disadvantage. What are the implications for practitioners? Identifying where demand for clinical services arises is an important step for service planning and preparing for potential outreach programs to optimise community-based care. It is likely that outreach programs to engage and enhance primary care services in geographic areas from which the greatest demand for tertiary liver disease speciality care arises would yield greater relative return on investment than non-targeted outreach programs.

Identifiability of Additive, Time-Varying Actuator and Sensor Faults by State Augmentation

NASA Technical Reports Server (NTRS)

Upchurch, Jason M.; Gonzalez, Oscar R.; Joshi, Suresh M.

2014-01-01

Recent work has provided a set of necessary and sucient conditions for identifiability of additive step faults (e.g., lock-in-place actuator faults, constant bias in the sensors) using state augmentation. This paper extends these results to an important class of faults which may affect linear, time-invariant systems. In particular, the faults under consideration are those which vary with time and affect the system dynamics additively. Such faults may manifest themselves in aircraft as, for example, control surface oscillations, control surface runaway, and sensor drift. The set of necessary and sucient conditions presented in this paper are general, and apply when a class of time-varying faults affects arbitrary combinations of actuators and sensors. The results in the main theorems are illustrated by two case studies, which provide some insight into how the conditions may be used to check the theoretical identifiability of fault configurations of interest for a given system. It is shown that while state augmentation can be used to identify certain fault configurations, other fault configurations are theoretically impossible to identify using state augmentation, giving practitioners valuable insight into such situations. That is, the limitations of state augmentation for a given system and configuration of faults are made explicit. Another limitation of model-based methods is that there can be large numbers of fault configurations, thus making identification of all possible configurations impractical. However, the theoretical identifiability of known, credible fault configurations can be tested using the theorems presented in this paper, which can then assist the efforts of fault identification practitioners.

An Automated Self-Learning Quantification System to Identify Visible Areas in Capsule Endoscopy Images.

PubMed

Hashimoto, Shinichi; Ogihara, Hiroyuki; Suenaga, Masato; Fujita, Yusuke; Terai, Shuji; Hamamoto, Yoshihiko; Sakaida, Isao

2017-08-01

Visibility in capsule endoscopic images is presently evaluated through intermittent analysis of frames selected by a physician. It is thus subjective and not quantitative. A method to automatically quantify the visibility on capsule endoscopic images has not been reported. Generally, when designing automated image recognition programs, physicians must provide a training image; this process is called supervised learning. We aimed to develop a novel automated self-learning quantification system to identify visible areas on capsule endoscopic images. The technique was developed using 200 capsule endoscopic images retrospectively selected from each of three patients. The rate of detection of visible areas on capsule endoscopic images between a supervised learning program, using training images labeled by a physician, and our novel automated self-learning program, using unlabeled training images without intervention by a physician, was compared. The rate of detection of visible areas was equivalent for the supervised learning program and for our automatic self-learning program. The visible areas automatically identified by self-learning program correlated to the areas identified by an experienced physician. We developed a novel self-learning automated program to identify visible areas in capsule endoscopic images.

Comparison of GWAS models to identify non-additive genetic control of flowering time in sunflower hybrids.

PubMed

Bonnafous, Fanny; Fievet, Ghislain; Blanchet, Nicolas; Boniface, Marie-Claude; Carrère, Sébastien; Gouzy, Jérôme; Legrand, Ludovic; Marage, Gwenola; Bret-Mestries, Emmanuelle; Munos, Stéphane; Pouilly, Nicolas; Vincourt, Patrick; Langlade, Nicolas; Mangin, Brigitte

2018-02-01

This study compares five models of GWAS, to show the added value of non-additive modeling of allelic effects to identify genomic regions controlling flowering time of sunflower hybrids. Genome-wide association studies are a powerful and widely used tool to decipher the genetic control of complex traits. One of the main challenges for hybrid crops, such as maize or sunflower, is to model the hybrid vigor in the linear mixed models, considering the relatedness between individuals. Here, we compared two additive and three non-additive association models for their ability to identify genomic regions associated with flowering time in sunflower hybrids. A panel of 452 sunflower hybrids, corresponding to incomplete crossing between 36 male lines and 36 female lines, was phenotyped in five environments and genotyped for 2,204,423 SNPs. Intra-locus effects were estimated in multi-locus models to detect genomic regions associated with flowering time using the different models. Thirteen quantitative trait loci were identified in total, two with both model categories and one with only non-additive models. A quantitative trait loci on LG09, detected by both the additive and non-additive models, is located near a GAI homolog and is presented in detail. Overall, this study shows the added value of non-additive modeling of allelic effects for identifying genomic regions that control traits of interest and that could participate in the heterosis observed in hybrids.

Identifying and assessing ecotourism visitor impacts at selected protected areas in Costa Rica and Belize

USGS Publications Warehouse

Farrell, T.A.; Marion, J.L.

2001-01-01

Protected area visitation is an important component of ecotourism, and as such, must be sustainable. However, protected area visitation may degrade natural resources, particularly in areas of concentrated visitor activities like trails and recreation sites. This is an important concern in ecotourism destinations such as Belize and Costa Rica, because they actively promote ecotourism and emphasize the pristine qualities of their natural resources. Research on visitor impacts to protected areas has many potential applications in protected area management, though it has not been widely applied in Central and South America. This study targeted this deficiency through manager interviews and evaluations of alternative impact assessment procedures at eight protected areas in Belize and Costa Rica. Impact assessment procedures included qualitative condition class systems, ratings systems, and measurement-based systems applied to trails and recreation sites. The resulting data characterize manager perceptions of impact problems, document trail and recreation site impacts, and provide examples of inexpensive, efficient and effective rapid impact assessment procedures. Interview subjects reported a variety of impacts affecting trails, recreation sites, wildlife, water, attraction features and other resources. Standardized assessment procedures were developed and applied to record trail and recreation site impacts. Impacts affecting the study areas included trail proliferation, erosion and widening, muddiness on trails, vegetation cover loss, soil and root exposure, and tree damage on recreation sites. The findings also illustrate the types of assessment data yielded by several alternative methods and demonstrate their utility to protected area managers. The need for additional rapid assessment procedures for wildlife, water, attraction feature and other resource impacts was also identified.

Using the Fusion Proximal Area Method and Gravity Method to Identify Areas with Physician Shortages

PubMed Central

Xiong, Xuechen; Jin, Chao; Chen, Haile; Luo, Li

2016-01-01

Objectives This paper presents a geographic information system (GIS)-based proximal area method and gravity method for identifying areas with physician shortages. The innovation of this paper is that it uses the appropriate methods to discover each type of health resource and then integrates all these methods to assess spatial access to health resources using population distribution data. In this way, spatial access to health resources for an entire city can be visualized in one neat package, which can help health policy makers quickly comprehend realistic distributions of health resources at a macro level. Methods First, classify health resources according to the trade areas of the patients they serve. Second, apply an appropriate method to each different type of health resource to measure spatial access to those resources. Third, integrate all types of access using population distribution data. Results In case study of Shanghai with the fusion method, areas with physician shortages are located primarily in suburban districts, especially in district junction areas. The result suggests that the government of Shanghai should pay more attention to these areas by investing in new or relocating existing health resources. Conclusion The fusion method is demonstrated to be more accurate and practicable than using a single method to assess spatial access to health resources. PMID:27695105

Use of demand for and spatial flow of ecosystem services to identify priority areas.

PubMed

Verhagen, Willem; Kukkala, Aija S; Moilanen, Atte; van Teeffelen, Astrid J A; Verburg, Peter H

2017-08-01

Policies and research increasingly focus on the protection of ecosystem services (ESs) through priority-area conservation. Priority areas for ESs should be identified based on ES capacity and ES demand and account for the connections between areas of ES capacity and demand (flow) resulting in areas of unique demand-supply connections (flow zones). We tested ways to account for ES demand and flow zones to identify priority areas in the European Union. We mapped the capacity and demand of a global (carbon sequestration), a regional (flood regulation), and 3 local ESs (air quality, pollination, and urban leisure). We used Zonation software to identify priority areas for ESs based on 6 tests: with and without accounting for ES demand and 4 tests that accounted for the effect of ES flow zone. There was only 37.1% overlap between the 25% of priority areas that encompassed the most ESs with and without accounting for ES demand. The level of ESs maintained in the priority areas increased from 23.2% to 57.9% after accounting for ES demand, especially for ESs with a small flow zone. Accounting for flow zone had a small effect on the location of priority areas and level of ESs maintained but resulted in fewer flow zones without ES maintained relative to ignoring flow zones. Accounting for demand and flow zones enhanced representation and distribution of ESs with local to regional flow zones without large trade-offs relative to the global ES. We found that ignoring ES demand led to the identification of priority areas in remote regions where benefits from ES capacity to society were small. Incorporating ESs in conservation planning should therefore always account for ES demand to identify an effective priority network for ESs. © 2016 The Authors. Conservation Biology published by Wiley Periodicals, Inc. on behalf of Society for Conservation Biology.

40 CFR 124.42 - Additional procedures for PSD permits affecting Class I areas.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Additional procedures for PSD permits... (CONTINUED) WATER PROGRAMS PROCEDURES FOR DECISIONMAKING Specific Procedures Applicable to PSD Permits § 124.42 Additional procedures for PSD permits affecting Class I areas. (a) The Regional Administrator...

40 CFR 124.42 - Additional procedures for PSD permits affecting Class I areas.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 40 Protection of Environment 23 2013-07-01 2013-07-01 false Additional procedures for PSD permits... (CONTINUED) WATER PROGRAMS PROCEDURES FOR DECISIONMAKING Specific Procedures Applicable to PSD Permits § 124.42 Additional procedures for PSD permits affecting Class I areas. (a) The Regional Administrator...

40 CFR 124.42 - Additional procedures for PSD permits affecting Class I areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Additional procedures for PSD permits... (CONTINUED) WATER PROGRAMS PROCEDURES FOR DECISIONMAKING Specific Procedures Applicable to PSD Permits § 124.42 Additional procedures for PSD permits affecting Class I areas. (a) The Regional Administrator...

40 CFR 124.42 - Additional procedures for PSD permits affecting Class I areas.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 40 Protection of Environment 23 2012-07-01 2012-07-01 false Additional procedures for PSD permits... (CONTINUED) WATER PROGRAMS PROCEDURES FOR DECISIONMAKING Specific Procedures Applicable to PSD Permits § 124.42 Additional procedures for PSD permits affecting Class I areas. (a) The Regional Administrator...

40 CFR 124.42 - Additional procedures for PSD permits affecting Class I areas.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 40 Protection of Environment 22 2014-07-01 2013-07-01 true Additional procedures for PSD permits... (CONTINUED) WATER PROGRAMS PROCEDURES FOR DECISIONMAKING Specific Procedures Applicable to PSD Permits § 124.42 Additional procedures for PSD permits affecting Class I areas. (a) The Regional Administrator...

Opuntia in México: Identifying Priority Areas for Conserving Biodiversity in a Multi-Use Landscape

PubMed Central

Illoldi-Rangel, Patricia; Ciarleglio, Michael; Sheinvar, Leia; Linaje, Miguel; Sánchez-Cordero, Victor; Sarkar, Sahotra

2012-01-01

Background México is one of the world's centers of species diversity (richness) for Opuntia cacti. Yet, in spite of their economic and ecological importance, Opuntia species remain poorly studied and protected in México. Many of the species are sparsely but widely distributed across the landscape and are subject to a variety of human uses, so devising implementable conservation plans for them presents formidable difficulties. Multi–criteria analysis can be used to design a spatially coherent conservation area network while permitting sustainable human usage. Methods and Findings Species distribution models were created for 60 Opuntia species using MaxEnt. Targets of representation within conservation area networks were assigned at 100% for the geographically rarest species and 10% for the most common ones. Three different conservation plans were developed to represent the species within these networks using total area, shape, and connectivity as relevant criteria. Multi–criteria analysis and a metaheuristic adaptive tabu search algorithm were used to search for optimal solutions. The plans were built on the existing protected areas of México and prioritized additional areas for management for the persistence of Opuntia species. All plans required around one–third of México's total area to be prioritized for attention for Opuntia conservation, underscoring the implausibility of Opuntia conservation through traditional land reservation. Tabu search turned out to be both computationally tractable and easily implementable for search problems of this kind. Conclusions Opuntia conservation in México require the management of large areas of land for multiple uses. The multi-criteria analyses identified priority areas and organized them in large contiguous blocks that can be effectively managed. A high level of connectivity was established among the prioritized areas resulting in the enhancement of possible modes of plant dispersal as well as only a small number

Identifying knickpoints using elevation breaks and offsets in slope-area scaling

NASA Astrophysics Data System (ADS)

Peifer Bezerra, Daniel; Persano, Cristina

2017-04-01

Steepened longitudinal river profile reaches, usually referred as knickpoints, are geomorphological fingerprints of tectonic, climatic and other perturbations, such as stream capture and sea level changes. Morphologically, knickpoints are distinguished as downstream increases in river gradient and as a break in slope-area scaling; that should theoretically correspond to along-stream variations in incision rate. Hence, the presence of knickpoints is a signature of the transgression of the steady state condition of fluvial systems (or of the spatial uniformity of boundary conditions), being thus the main distinctive feature of transient landscapes. Following a rapid change in relative base level fall rates, the fluvial adjustment occurs through an upstream migration of a knickpoint, taken the detachment-limited condition of the river as given. The knickpoint thus define three distinct reaches: the upstream reach not yet affected by the rejuvenation, the over-steepened reach containing the knickpoint, and the downstream reach that is graded to the new base level. Accordingly, migrating knickpoints have been documented in a myriad of geomorphological contexts such as post-glacial rebound, local earthquake faulting, an increase in fault throw rate and change in sea level. The study of the erosional response in upland landscapes to tectonic, climatic and other perturbations is intrinsically tied to the study of knickpoints. However, the ubiquity of knickpoints in landscape evolution studies is not bound with a precise definition of it, or with a unified methodology for its identification. Hence, we address here the issue of the determination of knickpoints in bedrock rivers using quantitative longitudinal profile analysis. We explored the different methods of identification of knickpoints in the literature, focusing on its definition, calculation, theoretical limitations and interpretation possibilities. Additionally, we applied those methods to a mountainous landward

Identifying Important Atlantic Areas for the conservation of Balearic shearwaters: Spatial overlap with conservation areas

NASA Astrophysics Data System (ADS)

Pérez-Roda, Amparo; Delord, Karine; Boué, Amélie; Arcos, José Manuel; García, David; Micol, Thierry; Weimerskirch, Henri; Pinaud, David; Louzao, Maite

2017-07-01

Marine protected areas (MPAs) are considered one of the main tools in both fisheries and conservation management to protect threatened species and their habitats around the globe. However, MPAs are underrepresented in marine environments compared to terrestrial environments. Within this context, we studied the Atlantic non-breeding distribution of the southern population of Balearic shearwaters (Puffinus mauretanicus) breeding in Eivissa during the 2011-2012 period based on global location sensing (GLS) devices. Our objectives were (1) to identify overall Important Atlantic Areas (IAAs) from a southern population, (2) to describe spatio-temporal patterns of oceanographic habitat use, and (3) to assess whether existing conservation areas (Natura 2000 sites and marine Important Bird Areas (IBAs)) cover the main IAAs of Balearic shearwaters. Our results highlighted that the Atlantic staging (from June to October in 2011) dynamic of the southern population was driven by individual segregation at both spatial and temporal scales. Individuals ranged in the North-East Atlantic over four main IAAs (Bay of Biscay: BoB, Western Iberian shelf: WIS, Gulf of Cadiz: GoC, West of Morocco: WoM). While most individuals spent more time on the WIS or in the GoC, a small number of birds visited IAAs at the extremes of their Atlantic distribution range (i.e., BoB and WoM). The chronology of the arrivals to the IAAs showed a latitudinal gradient with northern areas reached earlier during the Atlantic staging. The IAAs coincided with the most productive areas (higher chlorophyll a values) in the NE Atlantic between July and October. The spatial overlap between IAAs and conservation areas was higher for Natura 2000 sites than marine IBAs (areas with and without legal protection, respectively). Concerning the use of these areas, a slightly higher proportion of estimated positions fell within marine IBAs compared to designated Natura 2000 sites, with Spanish and Portuguese conservation

Identifying areas of deforestation risk for REDD+ using a species modeling tool

PubMed Central

Riveros, Juan Carlos; Forrest, Jessica L

2014-01-01

Background To implement the REDD+ mechanism (Reducing Emissions for Deforestation and Forest Degradation, countries need to prioritize areas to combat future deforestation CO2 emissions, identify the drivers of deforestation around which to develop mitigation actions, and quantify and value carbon for financial mechanisms. Each comes with its own methodological challenges, and existing approaches and tools to do so can be costly to implement or require considerable technical knowledge and skill. Here, we present an approach utilizing a machine learning technique known as Maximum Entropy Modeling (Maxent) to identify areas at high deforestation risk in the study area in Madre de Dios, Peru under a business-as-usual scenario in which historic deforestation rates continue. We link deforestation risk area to carbon density values to estimate future carbon emissions. We quantified area deforested and carbon emissions between 2000 and 2009 as the basis of the scenario. Results We observed over 80,000 ha of forest cover lost from 2000-2009 (0.21% annual loss), representing over 39 million Mg CO2. The rate increased rapidly following the enhancement of the Inter Oceanic Highway in 2005. Accessibility and distance to previous deforestation were strong predictors of deforestation risk, while land use designation was less important. The model performed consistently well (AUC > 0.9), significantly better than random when we compared predicted deforestation risk to observed. If past deforestation rates continue, we estimate that 132,865 ha of forest could be lost by the year 2020, representing over 55 million Mg CO2. Conclusions Maxent provided a reliable method for identifying areas at high risk of deforestation and the major explanatory variables that could draw attention for mitigation action planning under REDD+. The tool is accessible, replicable and easy to use; all necessary for producing good risk estimates and adapt models after potential landscape change. We

Identifying areas of deforestation risk for REDD+ using a species modeling tool.

PubMed

Aguilar-Amuchastegui, Naikoa; Riveros, Juan Carlos; Forrest, Jessica L

2014-01-01

To implement the REDD+ mechanism (Reducing Emissions for Deforestation and Forest Degradation, countries need to prioritize areas to combat future deforestation CO2 emissions, identify the drivers of deforestation around which to develop mitigation actions, and quantify and value carbon for financial mechanisms. Each comes with its own methodological challenges, and existing approaches and tools to do so can be costly to implement or require considerable technical knowledge and skill. Here, we present an approach utilizing a machine learning technique known as Maximum Entropy Modeling (Maxent) to identify areas at high deforestation risk in the study area in Madre de Dios, Peru under a business-as-usual scenario in which historic deforestation rates continue. We link deforestation risk area to carbon density values to estimate future carbon emissions. We quantified area deforested and carbon emissions between 2000 and 2009 as the basis of the scenario. We observed over 80,000 ha of forest cover lost from 2000-2009 (0.21% annual loss), representing over 39 million Mg CO2. The rate increased rapidly following the enhancement of the Inter Oceanic Highway in 2005. Accessibility and distance to previous deforestation were strong predictors of deforestation risk, while land use designation was less important. The model performed consistently well (AUC > 0.9), significantly better than random when we compared predicted deforestation risk to observed. If past deforestation rates continue, we estimate that 132,865 ha of forest could be lost by the year 2020, representing over 55 million Mg CO2. Maxent provided a reliable method for identifying areas at high risk of deforestation and the major explanatory variables that could draw attention for mitigation action planning under REDD+. The tool is accessible, replicable and easy to use; all necessary for producing good risk estimates and adapt models after potential landscape change. We propose this approach for developing

76 FR 51125 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-17

... Transnational Criminal Organizations.'' FOR FURTHER INFORMATION CONTACT: Assistant Director, Sanctions... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Additional Identifying Information... 13581of July 24, 2011, ``Blocking Property of Transnational Criminal Organizations.'' AGENCY: Office of...

76 FR 1337 - Asian Longhorned Beetle; Additions to Quarantined Areas in Massachusetts and New York

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-10

... Worcester County, MA, to the list of quarantined areas in Sec. 301.51-3(c) and by updating the description.... APHIS-2009-0014] Asian Longhorned Beetle; Additions to Quarantined Areas in Massachusetts and New York... areas and updating the description of the quarantined area in the Borough of Staten Island in the City...

Regression Analysis of Physician Distribution to Identify Areas of Need: Some Preliminary Findings.

ERIC Educational Resources Information Center

Morgan, Bruce B.; And Others

A regression analysis was conducted of factors that help to explain the variance in physician distribution and which identify those factors that influence the maldistribution of physicians. Models were developed for different geographic areas to determine the most appropriate unit of analysis for the Western Missouri Area Health Education Center…

32 CFR 761.20 - Additional regulations governing persons and vessels in Naval Defensive Sea Areas.

Code of Federal Regulations, 2011 CFR

2011-07-01

... vessels in Naval Defensive Sea Areas. 761.20 Section 761.20 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY ISLANDS UNDER NAVY JURISDICTION NAVAL DEFENSIVE SEA AREAS; NAVAL AIRSPACE... Instructions § 761.20 Additional regulations governing persons and vessels in Naval Defensive Sea Areas. (a) By...

[Identifying areas of epidemiological stratification in an onchocerciasis focus in Yanomami territory, Roraima, Brazil].

PubMed

Coelho, G E; Vieira, J B; Garcia-Zapata, M T; Schuertz, J C

1998-01-01

In this paper, aimed at suitable planning, analysis, and follow-up of treatment, control, and eradication in a human onchocerciasis program, were studied 27 geographic areas and examined 3,974 inhabitants. Four epidemiological areas with different prevalences were identified and stratified.

BAAM Additive Manufacturing of Magnetically Levitated Wind Turbine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Richardson, Bradley S.; Noakes, Mark W.; Roschli, Alex C.

ORNL worked with Hover Energy LLC (Hover) on the design of Big Area Additive Manufacturing (BAAM) extrusion components. The objective of this technical collaboration was to identify and evaluate fabrication of components using alternative additive manufacturing techniques. Multiple candidate parts were identified. A design modification to fabricate diverters using additive manufacturing (AM) was performed and the part was analyzed based on anticipated wind loading. Scaled versions of two parts were printed using the BAAM for wind tunnel testing.

Autofluorescence Lifetimes in Patients With Choroideremia Identify Photoreceptors in Areas With Retinal Pigment Epithelium Atrophy.

PubMed

Dysli, Chantal; Wolf, Sebastian; Tran, Hoai Viet; Zinkernagel, Martin S

2016-12-01

The purpose of this study was to investigate fundus autofluorescence lifetimes in patients with choroideremia and to identify tissue-specific lifetime characteristics and potential prognostic markers. Autofluorescence lifetimes of the retina were measured in two spectral channels (498-560 nm and 560-720 nm) in patients with choroideremia and age-matched healthy controls. Furthermore, autofluorescence intensities and spectral-domain optical coherence tomography (OCT) data were acquired and compared to fundus autofluorescence lifetime data. Sixteen eyes from 8 patients with advanced choroideremia (mean ± SD age, 55 ± 13 years) were included in this study and compared with 10 age-matched healthy participants. Whereas fundus autofluorescence intensity measurement identified areas of remaining retinal pigment epithelium (RPE), autofluorescence lifetime maps identified areas with remaining photoreceptor layers in OCT but RPE atrophy. In these areas, mean (±SEM) lifetimes were 567 ± 59 ps in the short and 603 ± 49 ps in the long spectral channels (+98% and +88% compared to controls). In areas of combined RPE atrophy and loss of photoreceptors, autofluorescence lifetimes were significantly prolonged by 1116 ± 63 ps (+364%) in the short and by 915 ± 52 ps (+270%) in the long spectral channels compared with controls. Because autofluorescence lifetimes identify areas of remaining photoreceptors in the absence of RPE, this imaging modality may be useful to monitor disease progression in the natural course of disease and in context of potential future therapeutic interventions.

Identifying hydrologically sensitive areas using LiDAR DEMs to mitigate critical source areas of diffuse pollution: development and application

NASA Astrophysics Data System (ADS)

Thomas, Ian; Jordan, Phil; Mellander, Per-Erik; Fenton, Owen; Shine, Oliver; hUallacháin, Daire Ó.; Creamer, Rachel; McDonald, Noeleen; Dunlop, Paul; Murphy, Paul

2016-04-01

Identifying critical source areas (CSAs) of diffuse pollution in agricultural catchments requires the accurate identification of hydrologically sensitive areas (HSAs) at highest propensity for generating surface runoff and transporting pollutants such as phosphorus (P). A new GIS-based HSA Index is presented that identifies HSAs at the sub-field scale. It uses a soil topographic index (STI) and accounts for the hydrological disconnection of overland flow via topographic impediment from flow sinks such as hedgerows and depressions. High resolution (0.25-2 m) LiDAR Digital Elevation Models (DEMs) are utilised to capture these microtopographic controls on flow pathways and hydrological connectivity. The HSA Index was applied to four agricultural catchments (~7.5-12 km2) with contrasting topography and soil types. Catchment HSA sizes were estimated using high resolution rainfall-quickflow measurements during saturated winter storm events in 2009-2014, and mapped using the HSA Index. HSA sizes ranged from 1.6-3.4% of the catchment area during median storm events and 2.9-8.5% during upper quartile events depending on whether well or poorly drained soils dominated, which validated HSA Index value distributions. Total flow sink volume capacities ranged from 8,298-59,584 m3 and caused 8.5-24.2% of overland-flow-generating-areas and 16.8-33.4% of catchment areas to become hydrologically disconnected from the open drainage channel network. HSA maps identified 'delivery points' along surface runoff pathways where transported pollutants such as P are delivered to the open drainage network. Using these as proposed locations for targeting mitigation measures such as riparian buffer strips (RBS) reduced costs compared to blanket implementation within an example agri-environment scheme by 66% and 91% over 1 and 5 years respectively, which included LiDAR DEM acquisition costs. Considering that HSAs are often the dominant P CSA factor in agricultural catchments and can override

Individual Human Brain Areas Can Be Identified from Their Characteristic Spectral Activation Fingerprints

PubMed Central

Keitel, Anne; Gross, Joachim

2016-01-01

The human brain can be parcellated into diverse anatomical areas. We investigated whether rhythmic brain activity in these areas is characteristic and can be used for automatic classification. To this end, resting-state MEG data of 22 healthy adults was analysed. Power spectra of 1-s long data segments for atlas-defined brain areas were clustered into spectral profiles (“fingerprints”), using k-means and Gaussian mixture (GM) modelling. We demonstrate that individual areas can be identified from these spectral profiles with high accuracy. Our results suggest that each brain area engages in different spectral modes that are characteristic for individual areas. Clustering of brain areas according to similarity of spectral profiles reveals well-known brain networks. Furthermore, we demonstrate task-specific modulations of auditory spectral profiles during auditory processing. These findings have important implications for the classification of regional spectral activity and allow for novel approaches in neuroimaging and neurostimulation in health and disease. PMID:27355236

Individual Human Brain Areas Can Be Identified from Their Characteristic Spectral Activation Fingerprints.

PubMed

Keitel, Anne; Gross, Joachim

2016-06-01

The human brain can be parcellated into diverse anatomical areas. We investigated whether rhythmic brain activity in these areas is characteristic and can be used for automatic classification. To this end, resting-state MEG data of 22 healthy adults was analysed. Power spectra of 1-s long data segments for atlas-defined brain areas were clustered into spectral profiles ("fingerprints"), using k-means and Gaussian mixture (GM) modelling. We demonstrate that individual areas can be identified from these spectral profiles with high accuracy. Our results suggest that each brain area engages in different spectral modes that are characteristic for individual areas. Clustering of brain areas according to similarity of spectral profiles reveals well-known brain networks. Furthermore, we demonstrate task-specific modulations of auditory spectral profiles during auditory processing. These findings have important implications for the classification of regional spectral activity and allow for novel approaches in neuroimaging and neurostimulation in health and disease.

Areas of Anomalous Surface Temperature in Archuleta County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains areas of anomalous surface temperature in Archuleta County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma

Areas of Anomalous Surface Temperature in Dolores County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains areas of anomalous surface temperature in Dolores County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma

Areas of Anomalous Surface Temperature in Chaffee County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains areas of anomalous surface temperature in Chaffee County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma

Areas of Anomalous Surface Temperature in Garfield County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains areas of anomalous surface temperature in Garfield County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma.

Areas of Anomalous Surface Temperature in Routt County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains areas of anomalous surface temperature in Routt County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma.

Orienting movements in area 9 identified by long-train ICMS.

PubMed

Lanzilotto, M; Perciavalle, V; Lucchetti, C

2015-03-01

The effect of intracortical microstimulation has been studied in several cortical areas from motor to sensory areas. The frontal pole has received particular attention, and several microstimulation studies have been conducted in the frontal eye field, supplementary eye field, and the premotor ear-eye field, but no microstimulation studies concerning area 9 are currently available in the literature. In the present study, to fill up this gap, electrical microstimulation was applied to area 9 in two macaque monkeys using long-train pulses of 500-700-800 and 1,000 ms, during two different experimental conditions: a spontaneous condition, while the animals were not actively fixating on a visual target, and during a visual fixation task. In these experiments, we identified backward ear movements, goal-directed eye movements, and the development of head forces. Kinematic parameters for ear and eye movements overlapped in the spontaneous condition, but they were different during the visual fixation task. In this condition, ear and eye kinematics have an opposite behavior: movement amplitude, duration, and maximal and mean velocities increase during a visual fixation task for the ear, while they decrease for the eye. Therefore, a top-down visual attention engagement could modify the kinematic parameters for these two effectors. Stimulation with the longest train durations, i.e., 800/1,000 ms, evokes not only the highest eye amplitude, but also a significant development of head forces. In this research article, we propose a new vision of the frontal oculomotor fields, speculating a role for area 9 in the control of goal-directed orienting behaviors and gaze shift control.

Why Additional Presentations Help Identify a Stimulus

ERIC Educational Resources Information Center

Guest, Duncan; Kent, Christopher; Adelman, James S.

2010-01-01

Nosofsky (1983) reported that additional stimulus presentations within a trial increase discriminability in absolute identification, suggesting that each presentation creates an independent stimulus representation, but it remains unclear whether exposure duration or the formation of independent representations improves discrimination in such…

13 CFR 108.1940 - Procedures for designation of additional Low-Income Geographic Areas

Code of Federal Regulations, 2010 CFR

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Procedures for designation of additional Low-Income Geographic Areas 108.1940 Section 108.1940 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Miscellaneous § 108.1940 Procedures...

Optimizing literature search in systematic reviews - are MEDLINE, EMBASE and CENTRAL enough for identifying effect studies within the area of musculoskeletal disorders?

PubMed

Aagaard, Thomas; Lund, Hans; Juhl, Carsten

2016-11-22

When conducting systematic reviews, it is essential to perform a comprehensive literature search to identify all published studies relevant to the specific research question. The Cochrane Collaborations Methodological Expectations of Cochrane Intervention Reviews (MECIR) guidelines state that searching MEDLINE, EMBASE and CENTRAL should be considered mandatory. The aim of this study was to evaluate the MECIR recommendations to use MEDLINE, EMBASE and CENTRAL combined, and examine the yield of using these to find randomized controlled trials (RCTs) within the area of musculoskeletal disorders. Data sources were systematic reviews published by the Cochrane Musculoskeletal Review Group, including at least five RCTs, reporting a search history, searching MEDLINE, EMBASE, CENTRAL, and adding reference- and hand-searching. Additional databases were deemed eligible if they indexed RCTs, were in English and used in more than three of the systematic reviews. Relative recall was calculated as the number of studies identified by the literature search divided by the number of eligible studies i.e. included studies in the individual systematic reviews. Finally, cumulative median recall was calculated for MEDLINE, EMBASE and CENTRAL combined followed by the databases yielding additional studies. Deemed eligible was twenty-three systematic reviews and the databases included other than MEDLINE, EMBASE and CENTRAL was AMED, CINAHL, HealthSTAR, MANTIS, OT-Seeker, PEDro, PsychINFO, SCOPUS, SportDISCUS and Web of Science. Cumulative median recall for combined searching in MEDLINE, EMBASE and CENTRAL was 88.9% and increased to 90.9% when adding 10 additional databases. Searching MEDLINE, EMBASE and CENTRAL was not sufficient for identifying all effect studies on musculoskeletal disorders, but additional ten databases did only increase the median recall by 2%. It is possible that searching databases is not sufficient to identify all relevant references, and that reviewers must rely upon

Workshop Report on Additive Manufacturing for Large-Scale Metal Components - Development and Deployment of Metal Big-Area-Additive-Manufacturing (Large-Scale Metals AM) System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Babu, Sudarsanam Suresh; Love, Lonnie J.; Peter, William H.

Additive manufacturing (AM) is considered an emerging technology that is expected to transform the way industry can make low-volume, high value complex structures. This disruptive technology promises to replace legacy manufacturing methods for the fabrication of existing components in addition to bringing new innovation for new components with increased functional and mechanical properties. This report outlines the outcome of a workshop on large-scale metal additive manufacturing held at Oak Ridge National Laboratory (ORNL) on March 11, 2016. The charter for the workshop was outlined by the Department of Energy (DOE) Advanced Manufacturing Office program manager. The status and impact ofmore » the Big Area Additive Manufacturing (BAAM) for polymer matrix composites was presented as the background motivation for the workshop. Following, the extension of underlying technology to low-cost metals was proposed with the following goals: (i) High deposition rates (approaching 100 lbs/h); (ii) Low cost (<$10/lbs) for steel, iron, aluminum, nickel, as well as, higher cost titanium, (iii) large components (major axis greater than 6 ft) and (iv) compliance of property requirements. The above concept was discussed in depth by representatives from different industrial sectors including welding, metal fabrication machinery, energy, construction, aerospace and heavy manufacturing. In addition, DOE’s newly launched High Performance Computing for Manufacturing (HPC4MFG) program was reviewed. This program will apply thermo-mechanical models to elucidate deeper understanding of the interactions between design, process, and materials during additive manufacturing. Following these presentations, all the attendees took part in a brainstorming session where everyone identified the top 10 challenges in large-scale metal AM from their own perspective. The feedback was analyzed and grouped in different categories including, (i) CAD to PART software, (ii) selection of energy source, (iii

Combining endangered plants and animals as surrogates to identify priority conservation areas in Yunnan, China

PubMed Central

Yang, Feiling; Hu, Jinming; Wu, Ruidong

2016-01-01

Suitable surrogates are critical for identifying optimal priority conservation areas (PCAs) to protect regional biodiversity. This study explored the efficiency of using endangered plants and animals as surrogates for identifying PCAs at the county level in Yunnan, southwest China. We ran the Dobson algorithm under three surrogate scenarios at 75% and 100% conservation levels and identified four types of PCAs. Assessment of the protection efficiencies of the four types of PCAs showed that endangered plants had higher surrogacy values than endangered animals but that the two were not substitutable; coupled endangered plants and animals as surrogates yielded a higher surrogacy value than endangered plants or animals as surrogates; the plant-animal priority areas (PAPAs) was the optimal among the four types of PCAs for conserving both endangered plants and animals in Yunnan. PAPAs could well represent overall species diversity distribution patterns and overlap with critical biogeographical regions in Yunnan. Fourteen priority units in PAPAs should be urgently considered as optimizing Yunnan’s protected area system. The spatial pattern of PAPAs at the 100% conservation level could be conceptualized into three connected conservation belts, providing a valuable reference for optimizing the layout of the in situ protected area system in Yunnan. PMID:27538537

Combining endangered plants and animals as surrogates to identify priority conservation areas in Yunnan, China

NASA Astrophysics Data System (ADS)

Yang, Feiling; Hu, Jinming; Wu, Ruidong

2016-08-01

Suitable surrogates are critical for identifying optimal priority conservation areas (PCAs) to protect regional biodiversity. This study explored the efficiency of using endangered plants and animals as surrogates for identifying PCAs at the county level in Yunnan, southwest China. We ran the Dobson algorithm under three surrogate scenarios at 75% and 100% conservation levels and identified four types of PCAs. Assessment of the protection efficiencies of the four types of PCAs showed that endangered plants had higher surrogacy values than endangered animals but that the two were not substitutable; coupled endangered plants and animals as surrogates yielded a higher surrogacy value than endangered plants or animals as surrogates; the plant-animal priority areas (PAPAs) was the optimal among the four types of PCAs for conserving both endangered plants and animals in Yunnan. PAPAs could well represent overall species diversity distribution patterns and overlap with critical biogeographical regions in Yunnan. Fourteen priority units in PAPAs should be urgently considered as optimizing Yunnan’s protected area system. The spatial pattern of PAPAs at the 100% conservation level could be conceptualized into three connected conservation belts, providing a valuable reference for optimizing the layout of the in situ protected area system in Yunnan.

Using Hospitalization and Mortality Data to Identify Areas at Risk for Adolescent Suicide.

PubMed

Chen, Kun; Aseltine, Robert H

2017-08-01

The purpose of this study is to use statewide data on inpatient hospitalizations for suicide attempts and suicide mortality to identify communities and school districts at risk for adolescent suicide. Five years of data (2010-2014) from the Office of the Connecticut Medical Examiner and the Connecticut Hospital Inpatient Discharge Database were analyzed. A mixed-effects Poisson regression model was used to assess whether suicide attempt/mortality rates in the state's 119 school districts were significantly better or worse than expected after adjusting for 10 community-level characteristics. Ten districts were at significantly higher risk for suicidal behavior, with suicide mortality/hospitalization rates ranging from 154% to 241% of their expected rates, after accounting for their community characteristics. Four districts were identified as having significantly lower risk for suicide attempts than expected after accounting for community-level advantages and disadvantages. Data capturing hospitalization for suicide attempts and suicide deaths can inform prevention activities by identifying high-risk areas to which resources should be allocated, as well as low-risk areas that may provide insight into the best practices in suicide prevention. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

49 CFR 192.905 - How does an operator identify a high consequence area?

Code of Federal Regulations, 2010 CFR

2010-10-01

...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.905 How does an operator identify a high consequence area? (a...

Identifying Safer Anti-Wear Triaryl Phosphate Additives for Jet Engine Lubricants

PubMed Central

Baker, Paul E.; Cole, Toby B.; Cartwright, Megan; Suzuki, Stephanie M.; Thummel, Kenneth E.; Lin, Yvonne S.; Co, Aila L.; Rettie, Allan E.; Kim, Jerry H.; Furlong, Clement E.

2013-01-01

Individuals aboard jet aircraft may be exposed to potentially toxic triaryl organophosphate anti-wear lubricant additives (TAPs) that are converted by cytochromes P450 into toxic metabolites. Consequences of exposure could be reduced by using less toxic TAPs. Our goal was to determine whether an in vitro assay for inhibition of butyrylcholinesterase (BChE) by bioactivated TAPs would be predictive of inhibition of serine active-site enzymes in vivo. The in vitro assay involved TAP bioactivation with liver microsomes and NADPH, followed by incubation with human BChE and measurement of BChE activity. Of 19 TAPs tested, tert-butylated isomers produced the least BChE inhibition. To determine the relevance of these results in vivo, mice were exposed to Durad 125 (D125; a commercial mixture of TAP esters) or to TAPs demonstrating low or no BChE inhibition when assayed in vitro. Inhibition of BChE by bioactivated TAPs in vitro correlated well with inhibition of other serine active-site enzymes in vivo, with the exception of brain acetylcholinesterase and neuropathy target esterase (NTE), which were not inhibited by any TAP tested following single exposures. A recombinant catalytic domain of NTE (rNEST) exhibited classical kinetic properties of NTE. The metabolite of tri-(o-cresyl) phosphate (ToCP), 2-(o-cresyl)-4H-1,3,2-benzodioxaphosphoran-2-one (CBDP), inhibited rNEST in vitro, but with an IC50 value almost 6-times higher than for inhibition of BChE. Physiologically-relevant concentrations of the flavonoid, naringenin, dramatically reduced D125 bioconversion in vitro. The in vitro assay should provide a valuable tool for prescreening candidate TAP anti-wear additives, identifying safer additives and reducing the number of animals required for in vivo toxicity testing. PMID:23085349

Identifying safer anti-wear triaryl phosphate additives for jet engine lubricants.

PubMed

Baker, Paul E; Cole, Toby B; Cartwright, Megan; Suzuki, Stephanie M; Thummel, Kenneth E; Lin, Yvonne S; Co, Aila L; Rettie, Allan E; Kim, Jerry H; Furlong, Clement E

2013-03-25

Individuals aboard jet aircraft may be exposed to potentially toxic triaryl organophosphate anti-wear lubricant additives (TAPs) that are converted by cytochromes P450 into toxic metabolites. Consequences of exposure could be reduced by using less toxic TAPs. Our goal was to determine whether an in vitro assay for inhibition of butyrylcholinesterase (BChE) by bioactivated TAPs would be predictive of inhibition of serine active-site enzymes in vivo. The in vitro assay involved TAP bioactivation with liver microsomes and NADPH, followed by incubation with human BChE and measurement of BChE activity. Of 19 TAPs tested, tert-butylated isomers produced the least BChE inhibition. To determine the relevance of these results in vivo, mice were exposed to Durad 125 (D125; a commercial mixture of TAP esters) or to TAPs demonstrating low or no BChE inhibition when assayed in vitro. Inhibition of BChE by bioactivated TAPs in vitro correlated well with inhibition of other serine active-site enzymes in vivo, with the exception of brain acetylcholinesterase and neuropathy target esterase (NTE), which were not inhibited by any TAP tested following single exposures. A recombinant catalytic domain of NTE (rNEST) exhibited classical kinetic properties of NTE. The metabolite of tri-(o-cresyl) phosphate (ToCP), 2-(o-cresyl)-4H-1,3,2-benzodioxaphosphoran-2-one (CBDP), inhibited rNEST in vitro, but with an IC(50) value almost 6-times higher than for inhibition of BChE. Physiologically-relevant concentrations of the flavonoid naringenin dramatically reduced D125 bioconversion in vitro. The in vitro assay should provide a valuable tool for prescreening candidate TAP anti-wear additives, identifying safer additives and reducing the number of animals required for in vivo toxicity testing. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

10 CFR 60.132 - Additional design criteria for surface facilities in the geologic repository operations area.

Code of Federal Regulations, 2010 CFR

2010-01-01

... geologic repository operations area. 60.132 Section 60.132 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) DISPOSAL OF HIGH-LEVEL RADIOACTIVE WASTES IN GEOLOGIC REPOSITORIES Technical Criteria Design Criteria for the Geologic Repository Operations Area § 60.132 Additional design criteria for surface facilities in...

Utility of Big Area Additive Manufacturing (BAAM) For The Rapid Manufacture of Customized Electric Vehicles

DOE Office of Scientific and Technical Information (OSTI.GOV)

Love, Lonnie J.

This Oak Ridge National Laboratory (ORNL) Manufacturing Development Facility (MDF) technical collaboration project was conducted in two phases as a CRADA with Local Motors Inc. Phase 1 was previously reported as Advanced Manufacturing of Complex Cyber Mechanical Devices through Community Engagement and Micro-manufacturing and demonstrated the integration of components onto a prototype body part for a vehicle. Phase 2 was reported as Utility of Big Area Additive Manufacturing (BAAM) for the Rapid Manufacture of Customized Electric Vehicles and demonstrated the high profile live printing of an all-electric vehicle using ONRL s Big Area Additive Manufacturing (BAAM) technology. This demonstration generatedmore » considerable national attention and successfully demonstrated the capabilities of the BAAM system as developed by ORNL and Cincinnati, Inc. and the feasibility of additive manufacturing of a full scale electric vehicle as envisioned by the CRADA partner Local Motors, Inc.« less

Classifying neighbourhoods by level of access to stores selling fresh fruit and vegetables and groceries: identifying problematic areas in the city of Gatineau, Quebec.

PubMed

Gould, Adrian C; Apparicio, Philippe; Cloutier, Marie-Soleil

2012-11-06

Physical access to stores selling groceries, fresh fruit and vegetables (FV) is essential for urban dwellers. In Canadian cities where low-density development practices are common, social and material deprivation may be compounded by poor geographic access to healthy food. This case study examines access to food stores selling fresh FV in Gatineau, Quebec, to identify areas where poor access is coincident with high deprivation. Food retailers were identified using two secondary sources and each store was visited to establish the total surface area devoted to the sale of fresh FV. Four population-weighted accessibility measures were then calculated for each dissemination area (DA) using road network distances. A deprivation index was created using variables from the 2006 Statistics Canada census, also at the scale of the DA. Finally, six classes of accessibility to a healthy diet were constructed using a k-means classification procedure. These were mapped and superimposed over high deprivation areas. Overall, deprivation is positively correlated with better accessibility. However, more than 18,000 residents (7.5% of the population) live in high deprivation areas characterized by large distances to the nearest retail food store (means of 1.4 km or greater) and virtually no access to fresh FV within walking distance (radius of 1 km). In this research, we identified areas where poor geographic access may introduce an additional constraint for residents already dealing with the challenges of limited financial and social resources. Our results may help guide local food security policies and initiatives.

APPROACHES TO GEOMETRIC DATA ANALYSIS ON BIG AREA ADDITIVELY MANUFACTURED (BAAM) PARTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dreifus, Gregory D; Ally, Nadya R; Post, Brian K

The promise of additive manufacturing is that a user can design and print complex geometries that are very difficult, if not impossible, to machine. The capabilities of 3D printing are restricted by a number of factors, including properties of the build material, time constraints, and geometric design restrictions. In this paper, a thorough accounting and study of the geometric restrictions that exist in the current iteration of additive manufacturing (AM) fused deposition modeling (FDM) technologies are discussed. Offline and online methodologies for collecting data sets for qualitative analysis of large scale AM, in particular Oak Ridge National Laboratory s (ORNL)more » big area additive manufacturing (BAAM) system, are summarized. In doing so, a survey of tools for designers and software developers is provided. In particular, strategies in which geometric data can be used as training sets for smarter AM technologies in the future are explained as well.« less

Changing climate, challenging choices: identifying and evaluating climate change adaptation options for protected areas management in Ontario, Canada.

PubMed

Lemieux, Christopher J; Scott, Daniel J

2011-10-01

Climate change will pose increasingly significant challenges to managers of parks and other forms of protected areas around the world. Over the past two decades, numerous scientific publications have identified potential adaptations, but their suitability from legal, policy, financial, internal capacity, and other management perspectives has not been evaluated for any protected area agency or organization. In this study, a panel of protected area experts applied a Policy Delphi methodology to identify and evaluate climate change adaptation options across the primary management areas of a protected area agency in Canada. The panel identified and evaluated one hundred and sixty five (165) adaptation options for their perceived desirability and feasibility. While the results revealed a high level of agreement with respect to the desirability of adaptation options and a moderate level of capacity pertaining to policy formulation and management direction, a perception of low capacity for implementation in most other program areas was identified. A separate panel of senior park agency decision-makers used a multiple criterion decision-facilitation matrix to further evaluate the institutional feasibility of the 56 most desirable adaptation options identified by the initial expert panel and to prioritize them for consideration in a climate change action plan. Critically, only two of the 56 adaptation options evaluated by senior decision-makers were deemed definitely implementable, due largely to fiscal and internal capacity limitations. These challenges are common to protected area agencies in developed countries and pervade those in developing countries, revealing that limited adaptive capacity represents a substantive barrier to biodiversity conservation and other protected area management objectives in an era of rapid climate change.

Changing Climate, Challenging Choices: Identifying and Evaluating Climate Change Adaptation Options for Protected Areas Management in Ontario, Canada

NASA Astrophysics Data System (ADS)

Lemieux, Christopher J.; Scott, Daniel J.

2011-10-01

Climate change will pose increasingly significant challenges to managers of parks and other forms of protected areas around the world. Over the past two decades, numerous scientific publications have identified potential adaptations, but their suitability from legal, policy, financial, internal capacity, and other management perspectives has not been evaluated for any protected area agency or organization. In this study, a panel of protected area experts applied a Policy Delphi methodology to identify and evaluate climate change adaptation options across the primary management areas of a protected area agency in Canada. The panel identified and evaluated one hundred and sixty five (165) adaptation options for their perceived desirability and feasibility. While the results revealed a high level of agreement with respect to the desirability of adaptation options and a moderate level of capacity pertaining to policy formulation and management direction, a perception of low capacity for implementation in most other program areas was identified. A separate panel of senior park agency decision-makers used a multiple criterion decision-facilitation matrix to further evaluate the institutional feasibility of the 56 most desirable adaptation options identified by the initial expert panel and to prioritize them for consideration in a climate change action plan. Critically, only two of the 56 adaptation options evaluated by senior decision-makers were deemed definitely implementable, due largely to fiscal and internal capacity limitations. These challenges are common to protected area agencies in developed countries and pervade those in developing countries, revealing that limited adaptive capacity represents a substantive barrier to biodiversity conservation and other protected area management objectives in an era of rapid climate change.

Process Modeling and Validation for Metal Big Area Additive Manufacturing

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simunovic, Srdjan; Nycz, Andrzej; Noakes, Mark W.

Metal Big Area Additive Manufacturing (mBAAM) is a new additive manufacturing (AM) technology based on the metal arc welding. A continuously fed metal wire is melted by an electric arc that forms between the wire and the substrate, and deposited in the form of a bead of molten metal along the predetermined path. Objects are manufactured one layer at a time starting from the base plate. The final properties of the manufactured object are dependent on its geometry and the metal deposition path, in addition to depending on the basic welding process parameters. Computational modeling can be used to acceleratemore » the development of the mBAAM technology as well as a design and optimization tool for the actual manufacturing process. We have developed a finite element method simulation framework for mBAAM using the new features of software ABAQUS. The computational simulation of material deposition with heat transfer is performed first, followed by the structural analysis based on the temperature history for predicting the final deformation and stress state. In this formulation, we assume that two physics phenomena are coupled in only one direction, i.e. the temperatures are driving the deformation and internal stresses, but their feedback on the temperatures is negligible. The experiment instrumentation (measurement types, sensor types, sensor locations, sensor placements, measurement intervals) and the measurements are presented. The temperatures and distortions from the simulations show good correlation with experimental measurements. Ongoing modeling work is also briefly discussed.« less

7 CFR 4290.130 - Identified Rural Areas.

Code of Federal Regulations, 2010 CFR

2010-01-01

... specific Rural Area or Areas in which it intends to make Developmental Venture Capital investments and... RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL BUSINESS INVESTMENT COMPANY (âRBICâ) PROGRAM...

Model of areas for identifying risks influencing the compliance of technological processes and products

NASA Astrophysics Data System (ADS)

Misztal, A.; Belu, N.

2016-08-01

Operation of every company is associated with the risk of interfering with proper performance of its fundamental processes. This risk is associated with various internal areas of the company, as well as the environment in which it operates. From the point of view of ensuring compliance of the course of specific technological processes and, consequently, product conformity with requirements, it is important to identify these threats and eliminate or reduce the risk of their occurrence. The purpose of this article is to present a model of areas of identifying risk affecting the compliance of processes and products, which is based on multiregional targeted monitoring of typical places of interference and risk management methods. The model is based on the verification of risk analyses carried out in small and medium-sized manufacturing companies in various industries..

Performance of the lot quality assurance sampling method compared to surveillance for identifying inadequately-performing areas in Matlab, Bangladesh.

PubMed

Bhuiya, Abbas; Hanifi, S M A; Roy, Nikhil; Streatfield, P Kim

2007-03-01

This paper compared the performance of the lot quality assurance sampling (LQAS) method in identifying inadequately-performing health work-areas with that of using health and demographic surveillance system (HDSS) data and examined the feasibility of applying the method by field-level programme supervisors. The study was carried out in Matlab, the field site of ICDDR,B, where a HDSS has been in place for over 30 years. The LQAS method was applied in 57 work-areas of community health workers in ICDDR,B-served areas in Matlab during July-September 2002. The performance of the LQAS method in identifying work-areas with adequate and inadequate coverage of various health services was compared with those of the HDSS. The health service-coverage indicators included coverage of DPT, measles, BCG vaccination, and contraceptive use. It was observed that the difference in the proportion of work-areas identified to be inadequately performing using the LQAS method with less than 30 respondents, and the HDSS was not statistically significant. The consistency between the LQAS method and the HDSS in identifying work-areas was greater for adequately-performing areas than inadequately-performing areas. It was also observed that the field managers could be trained to apply the LQAS method in monitoring their performance in reaching the target population.

Identifying security checkpoints locations to protect the major U.S. urban areas

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cuellar-Hengartner, Leticia; Watkins, Daniel; Kubicek, Deborah A.

Transit networks are integral to the economy and to society, but at the same time they could allow terrorists to transport weapons of mass destruction into any city. Road networks are especially vulnerable, because they lack natural checkpoints unlike air networks that have security measures in place at all major airports. One approach to mitigate this risk is ensuring that every road route passes through at least one security checkpoint. Using the Ford-Fulkerson maximum-flow algorithm, we generate a minimum set of checkpoint locations within a ring-shaped buffer area surrounding the 50 largest US urban areas. We study how the numbermore » of checkpoints changes as we increase the buffer width to perform a cost-benefit analysis and to identify groups of cities that behave similarly. The set of required checkpoints is surprisingly small (10-124) despite the hundreds of thousands of road arcs in those areas, making it feasible to protect all major cities.« less

Identifying security checkpoints locations to protect the major U.S. urban areas

DOE PAGES

Cuellar-Hengartner, Leticia; Watkins, Daniel; Kubicek, Deborah A.; ...

2015-09-01

Transit networks are integral to the economy and to society, but at the same time they could allow terrorists to transport weapons of mass destruction into any city. Road networks are especially vulnerable, because they lack natural checkpoints unlike air networks that have security measures in place at all major airports. One approach to mitigate this risk is ensuring that every road route passes through at least one security checkpoint. Using the Ford-Fulkerson maximum-flow algorithm, we generate a minimum set of checkpoint locations within a ring-shaped buffer area surrounding the 50 largest US urban areas. We study how the numbermore » of checkpoints changes as we increase the buffer width to perform a cost-benefit analysis and to identify groups of cities that behave similarly. The set of required checkpoints is surprisingly small (10-124) despite the hundreds of thousands of road arcs in those areas, making it feasible to protect all major cities.« less

V-shaped resonators for addition of broad-area laser diode arrays

DOEpatents

Liu, Bo; Liu, Yun; Braiman, Yehuda Y.

2012-12-25

A system and method for addition of broad-area semiconductor laser diode arrays are described. The system can include an array of laser diodes, a V-shaped external cavity, and grating systems to provide feedback for phase-locking of the laser diode array. A V-shaped mirror used to couple the laser diode emissions along two optical paths can be a V-shaped prism mirror, a V-shaped stepped mirror or include multiple V-shaped micro-mirrors. The V-shaped external cavity can be a ring cavity. The system can include an external injection laser to further improve coherence and phase-locking.

Comparing spatially explicit ecological and social values for natural areas to identify effective conservation strategies.

PubMed

Bryan, Brett Anthony; Raymond, Christopher Mark; Crossman, Neville David; King, Darran

2011-02-01

Consideration of the social values people assign to relatively undisturbed native ecosystems is critical for the success of science-based conservation plans. We used an interview process to identify and map social values assigned to 31 ecosystem services provided by natural areas in an agricultural landscape in southern Australia. We then modeled the spatial distribution of 12 components of ecological value commonly used in setting spatial conservation priorities. We used the analytical hierarchy process to weight these components and used multiattribute utility theory to combine them into a single spatial layer of ecological value. Social values assigned to natural areas were negatively correlated with ecological values overall, but were positively correlated with some components of ecological value. In terms of the spatial distribution of values, people valued protected areas, whereas those natural areas underrepresented in the reserve system were of higher ecological value. The habitats of threatened animal species were assigned both high ecological value and high social value. Only small areas were assigned both high ecological value and high social value in the study area, whereas large areas of high ecological value were of low social value, and vice versa. We used the assigned ecological and social values to identify different conservation strategies (e.g., information sharing, community engagement, incentive payments) that may be effective for specific areas. We suggest that consideration of both ecological and social values in selection of conservation strategies can enhance the success of science-based conservation planning. ©2010 Society for Conservation Biology.

Performance of the Lot Quality Assurance Sampling Method Compared to Surveillance for Identifying Inadequately-performing Areas in Matlab, Bangladesh

PubMed Central

Hanifi, S.M.A.; Roy, Nikhil; Streatfield, P. Kim

2007-01-01

This paper compared the performance of the lot quality assurance sampling (LQAS) method in identifying inadequately-performing health work-areas with that of using health and demographic surveillance system (HDSS) data and examined the feasibility of applying the method by field-level programme supervisors. The study was carried out in Matlab, the field site of ICDDR,B, where a HDSS has been in place for over 30 years. The LQAS method was applied in 57 work-areas of community health workers in ICDDR,B-served areas in Matlab during July-September 2002. The performance of the LQAS method in identifying work-areas with adequate and inadequate coverage of various health services was compared with those of the HDSS. The health service-coverage indicators included coverage of DPT, measles, BCG vaccination, and contraceptive use. It was observed that the difference in the proportion of work-areas identified to be inadequately performing using the LQAS method with less than 30 respondents, and the HDSS was not statistically significant. The consistency between the LQAS method and the HDSS in identifying work-areas was greater for adequately-performing areas than inadequately-performing areas. It was also observed that the field managers could be trained to apply the LQAS method in monitoring their performance in reaching the target population. PMID:17615902

Identifying the impact of social determinants of health on disease rates using correlation analysis of area-based summary information.

PubMed

Song, Ruiguang; Hall, H Irene; Harrison, Kathleen McDavid; Sharpe, Tanya Telfair; Lin, Lillian S; Dean, Hazel D

2011-01-01

We developed a statistical tool that brings together standard, accessible, and well-understood analytic approaches and uses area-based information and other publicly available data to identify social determinants of health (SDH) that significantly affect the morbidity of a specific disease. We specified AIDS as the disease of interest and used data from the American Community Survey and the National HIV Surveillance System. Morbidity and socioeconomic variables in the two data systems were linked through geographic areas that can be identified in both systems. Correlation and partial correlation coefficients were used to measure the impact of socioeconomic factors on AIDS diagnosis rates in certain geographic areas. We developed an easily explained approach that can be used by a data analyst with access to publicly available datasets and standard statistical software to identify the impact of SDH. We found that the AIDS diagnosis rate was highly correlated with the distribution of race/ethnicity, population density, and marital status in an area. The impact of poverty, education level, and unemployment depended on other SDH variables. Area-based measures of socioeconomic variables can be used to identify risk factors associated with a disease of interest. When correlation analysis is used to identify risk factors, potential confounding from other variables must be taken into account.

SIPSEY WILDERNESS AND ADDITIONS, ALABAMA.

USGS Publications Warehouse

Schweinfurth, Stanley P.; Mory, Peter C.

1984-01-01

On the basis of geologic, geochemical, and mineral surveys the Sipsey Wilderness and additions are deemed to have little promise for the occurrence of metallic mineral resources. Although limestone, shale, and sandstone resources that occur in the area are physically suitable for a variety of uses, similar materials are available outside the area closer to transportation routes and potential markets. A small amount of coal has been identified in the area, occurring as nonpersistent beds less than 28 in. thick. Oil and (or) natural gas resources may be present if suitable structural traps exist in the subsurface. Therefore, the area has a probable oil and gas potential. Small amounts of asphaltic sandstone and limestone, commonly referred to as tar sands, may also occur in the subsurface. 5 refs.

Value of electrical stimulation and high frequency oscillations (80–500 Hz) in identifying epileptogenic areas during intracranial EEG recordings

PubMed Central

Jacobs, Julia; Zijlmans, Maeike; Zelmann, Rina; Olivier, André; Hall, Jeffery; Gotman, Jean; Dubeau, François

2013-01-01

Summary Purpose Electrical stimulation (ES) is used during intracranial electroencephalography (EEG) investigations to delineate epileptogenic areas and seizure-onset zones (SOZs) by provoking afterdischarges (ADs) or patients’ typical seizure. High frequency oscillations (HFOs—ripples, 80–250 Hz; fast ripples, 250–500 Hz) are linked to seizure onset. This study investigates whether interictal HFOs are more frequent in areas with a low threshold to provoke ADs or seizures. Methods Intracranial EEG studies were filtered at 500 Hz and sampled at 2,000 Hz. HFOs were visually identified. Twenty patients underwent ES, with gradually increasing currents. Results were interpreted as agreeing or disagreeing with the intracranial study (clinical-EEG seizure onset defined the SOZ). Current thresholds provoking an AD or seizure were correlated with the rate of HFOs of each channel. Results ES provoked a seizure in 12 and ADs in 19 patients. Sixteen patients showed an ES response inside the SOZ, and 10 had additional areas with ADs. The response was more specific for mesiotemporal than for neocortical channels. HFO rates were negatively correlated with thresholds for ES responses; especially in neo-cortical regions; areas with low threshold and high HFO rate were colocalized even outside the SOZ. Discussion Areas showing epileptic HFOs colocalize with those reacting to ES. HFOs may represent a pathologic correlate of regions showing an ES response; both phenomena suggest a more widespread epileptogenicity. PMID:19845730

Areas of Anomalous Surface Temperature in Alamosa and Saguache Counties, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

This layer contains areas of anomalous surface temperature in Alamosa and Saguache Counties identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies) Note: 'o' is used in this description to represent lowercase sigma.

Leptospirosis Outbreaks in Nicaragua: Identifying Critical Areas and Exploring Drivers for Evidence-Based Planning

PubMed Central

Schneider, Maria Cristina; Nájera, Patricia; Aldighieri, Sylvain; Bacallao, Jorge; Soto, Aida; Marquiño, Wilmer; Altamirano, Lesbia; Saenz, Carlos; Marin, Jesus; Jimenez, Eduardo; Moynihan, Matthew; Espinal, Marcos

2012-01-01

Leptospirosis is an epidemic-prone zoonotic disease that occurs worldwide. In Central America, leptospirosis outbreaks have been reported in almost all countries; Nicaragua in particular has faced several outbreaks. The objective of this study was to stratify the risk and identify “critical areas” for leptospirosis outbreaks in Nicaragua, and to perform an exploratory analysis of potential “drivers”. This ecological study includes the entire country (153 municipalities). Cases from 2004 to 2010 were obtained from the country’s health information system, demographic and socioeconomic variables from its Census, and environmental data from external sources. Criteria for risk stratification of leptospirosis were defined. Nicaragua reported 1,980 cases of leptospirosis during this period, with the highest percentage of cases (26.36%) in León, followed by Chinandega (15.35%). Among the 153 municipalities, 48 were considered critical areas, 85 were endemic and 20 silent. Using spatial and statistical analysis, the variable presenting the most evident pattern of association with critical areas defined by top quintile of incidence rate is the percentage of municipal surface occupied by the soil combination of cambisol (over pyroclastic and lava bedrock) and andosol (over a volcanic ashes foundation). Precipitation and percentage of rural population are also associated with critical areas. This methodology and findings could be used for Nicaragua’s Leptospirosis Intersectoral Plan, and to identify possible risk areas in other countries with similar drivers. PMID:23202822

25 CFR 170.501 - What happens when the review process identifies areas for improvement?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false What happens when the review process identifies areas for improvement? 170.501 Section 170.501 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian Reservation Roads...

Real-time analysis application for identifying bursty local areas related to emergency topics.

PubMed

Sakai, Tatsuhiro; Tamura, Keiichi

2015-01-01

Since social media started getting more attention from users on the Internet, social media has been one of the most important information source in the world. Especially, with the increasing popularity of social media, data posted on social media sites are rapidly becoming collective intelligence, which is a term used to refer to new media that is displacing traditional media. In this paper, we focus on geotagged tweets on the Twitter site. These geotagged tweets are referred to as georeferenced documents because they include not only a short text message, but also the documents' posting time and location. Many researchers have been tackling the development of new data mining techniques for georeferenced documents to identify and analyze emergency topics, such as natural disasters, weather, diseases, and other incidents. In particular, the utilization of geotagged tweets to identify and analyze natural disasters has received much attention from administrative agencies recently because some case studies have achieved compelling results. In this paper, we propose a novel real-time analysis application for identifying bursty local areas related to emergency topics. The aim of our new application is to provide new platforms that can identify and analyze the localities of emergency topics. The proposed application is composed of three core computational intelligence techniques: the Naive Bayes classifier technique, the spatiotemporal clustering technique, and the burst detection technique. Moreover, we have implemented two types of application interface: a Web application interface and an android application interface. To evaluate the proposed application, we have implemented a real-time weather observation system embedded the proposed application. we used actual crawling geotagged tweets posted on the Twitter site. The weather observation system successfully detected bursty local areas related to observed emergency weather topics.

Are Mammographically Occult Additional Tumors Identified More Than 2 Cm Away From the Primary Breast Cancer on MRI Clinically Significant?

PubMed

Goodman, Sarah; Mango, Victoria; Friedlander, Lauren; Desperito, Elise; Wynn, Ralph; Ha, Richard

2018-06-08

To evaluate the clinical significance of mammographically occult additional tumors identified more than 2cm away from the primary breast cancer on preoperative magnetic resonance imaging (MRI). An Institutional Review Board approved review of consecutive preoperative breast MRIs performed from 1/1/08 to 12/31/14, yielded 667 patients with breast cancer. These patients underwent further assessment to identify biopsy proven mammographically occult breast tumors located more than 2cm away from the edge of the primary tumor. Additional MRI characteristics of the primary and secondary tumors and pathology were reviewed. Statistical analysis was performed using SPSS (v. 24). Of 667 patients with breast cancer, 129 patients had 150 additional ipsilateral mammographically occult tumors that were more than 2cm away from the edge of the primary tumor. One hundred twelve of 129 (86.8%) patients had one additional tumor and 17/129 (13.2%) had two or more additional tumors. In 71/129 (55.0%), additional tumors were located in a different quadrant and in 58/129 (45.0%) additional tumors were in the same quadrant but ≥2cm away. Overall, primary tumor size was significantly larger (mean 1.87± 1.25 cm) than the additional tumors (mean 0.79 ± 0.61cm, p < 0.001). However, in 20/129 (15.5%) the additional tumor was larger and in 26/129 (20.2%) the additional tumor was ≥1cm. The primary tumor was significantly more likely to be invasive (81.4%, 105/129) compared to additional tumors (70%, 105/150, p = 0.03). In 9/129 (7.0%) patients, additional tumors yielded unsuspected invasive cancer orhigher tumor grade. The additional tumor was more likely to be nonmass lesion type (37.3% vs 24% p = 0.02) and focus lesion type (10% vs 0.08%, p < 0.001) compared to primary tumor. Mammographically occult additional tumors identified more than 2cm away from the primary breast tumor on MRI are unlikely to be surgically treated if undiagnosed and may be clinically significant. Copyright �

Identifiability of Additive Actuator and Sensor Faults by State Augmentation

NASA Technical Reports Server (NTRS)

Joshi, Suresh; Gonzalez, Oscar R.; Upchurch, Jason M.

2014-01-01

A class of fault detection and identification (FDI) methods for bias-type actuator and sensor faults is explored in detail from the point of view of fault identifiability. The methods use state augmentation along with banks of Kalman-Bucy filters for fault detection, fault pattern determination, and fault value estimation. A complete characterization of conditions for identifiability of bias-type actuator faults, sensor faults, and simultaneous actuator and sensor faults is presented. It is shown that FDI of simultaneous actuator and sensor faults is not possible using these methods when all sensors have unknown biases. The fault identifiability conditions are demonstrated via numerical examples. The analytical and numerical results indicate that caution must be exercised to ensure fault identifiability for different fault patterns when using such methods.

Differentiation of specific ripple patterns helps to identify epileptogenic areas for surgical procedures.

PubMed

Kerber, Karolin; Dümpelmann, Matthias; Schelter, Björn; Le Van, Pierre; Korinthenberg, Rudolf; Schulze-Bonhage, Andreas; Jacobs, Julia

2014-07-01

High frequency oscillations (HFOs) at 80-500 Hz are promising markers of epileptic areas. Several retrospective studies reported that surgical removal of areas generating HFOs was associated with a good seizure outcome. Recent reports suggested that ripple (80-200 Hz) HFO patterns co-existed with different background EEG activities. We hypothesized that the coexisting background EEG pattern may distinguish physiological from epileptic ripples. Rates of HFOs were analyzed in intracranial EEG recordings of 22 patients. Additionally, ripple patterns were classified for each channel depending either as coexisting with a flat or oscillatory background activity. A multi-variate analysis was performed to determine whether removal of areas showing the above EEG markers correlated with seizure outcome. Removal of areas generating high rates of 'fast ripples (>200 Hz)' and 'ripples on a flat background activity' showed a significant correlation with a seizure-free outcome. In contrast, removal of high rates of 'ripples' or 'ripple patterns in a continuously oscillating background' was not significantly associated with seizure outcome. Ripples occurring in an oscillatory background activity may be suggestive of physiological activity, while those on a flat background reflect epileptic activity. Consideration of coexisting background patterns may improve the delineation of the epileptogenic areas using ripple oscillations. Copyright © 2013 International Federation of Clinical Neurophysiology. Published by Elsevier Ireland Ltd. All rights reserved.

Identifying priority chronic wasting disease surveillance areas for mule deer in Montana

USGS Publications Warehouse

Russell, Robin E.; Gude, Justin; Anderson, N.J.; Ramsey, Jennifer M.

2015-01-01

Chronic wasting disease (CWD) is a fatal prion disease that affects a variety of ungulate species including mule deer (Odocoileus hemionus). As of 2014, no CWD cases had been reported in free-ranging ungulates in Montana. However, nearby cases in Canada, Wyoming, and the Dakotas indicated that the disease was encroaching on Montana's borders. Mule deer are native and common throughout Montana, and they represent a significant portion of the total hunter-harvested cervids in the state. The arrival of CWD in Montana may have significant ecosystem and socioeconomic impacts as well as potential consequences for wildlife management. We used 18,879 mule deer locations from 892 individual deer collected during 1975–2011 and modeled habitat selection for 7 herds in 5 of the 7 wildlife management regions in Montana. We estimated resource selection functions (RSF) in a Bayesian framework to predict summer and winter habitat preferences for mule deer. We estimated deer abundance from flyover counts for each region, and used the RSF predictions as weights to distribute the deer across the region. We then calculated the distance to the nearest known infected herds. We predicted areas of high risk of CWD infection in mule deer as areas with densities above the median density estimate and within the lowest quartile of distances to known infected herds. We identified these areas, the southeast corner of Montana and the north-central border near Alberta and Saskatchewan, as priority areas for CWD surveillance and management efforts. 

Metal Big Area Additive Manufacturing: Process Modeling and Validation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Simunovic, Srdjan; Nycz, Andrzej; Noakes, Mark W

Metal Big Area Additive Manufacturing (mBAAM) is a new additive manufacturing (AM) technology for printing large-scale 3D objects. mBAAM is based on the gas metal arc welding process and uses a continuous feed of welding wire to manufacture an object. An electric arc forms between the wire and the substrate, which melts the wire and deposits a bead of molten metal along the predetermined path. In general, the welding process parameters and local conditions determine the shape of the deposited bead. The sequence of the bead deposition and the corresponding thermal history of the manufactured object determine the long rangemore » effects, such as thermal-induced distortions and residual stresses. Therefore, the resulting performance or final properties of the manufactured object are dependent on its geometry and the deposition path, in addition to depending on the basic welding process parameters. Physical testing is critical for gaining the necessary knowledge for quality prints, but traversing the process parameter space in order to develop an optimized build strategy for each new design is impractical by pure experimental means. Computational modeling and optimization may accelerate development of a build process strategy and saves time and resources. Because computational modeling provides these opportunities, we have developed a physics-based Finite Element Method (FEM) simulation framework and numerical models to support the mBAAM process s development and design. In this paper, we performed a sequentially coupled heat transfer and stress analysis for predicting the final deformation of a small rectangular structure printed using the mild steel welding wire. Using the new simulation technologies, material was progressively added into the FEM simulation as the arc weld traversed the build path. In the sequentially coupled heat transfer and stress analysis, the heat transfer was performed to calculate the temperature evolution, which was used in a stress

Integrating social media and remote sensing data in a model framework to identify vulnerable areas in coastal cities after disasters

NASA Astrophysics Data System (ADS)

Gopalakrishnan, G.

2013-12-01

In the aftermath of man-made disasters such as oil spills or natural disasters such as hurricanes and floods, city planners and residents of affected areas are often concerned about future vulnerabilities and rebuilding the area to increase resilience. However, identifying locations in the affected area that are most impacted by the disaster, the associated human health risks and potential vulnerabilities often require a monitoring effort that is expensive, time-consuming and difficult to implement in disaster-hit areas using traditional monitoring techniques. This project presents a framework for identifying areas that are most likely to be impacted by disasters by integrating remote sensing data and information from social media networks, including Twitter streams. The framework was tested for New York, coastal New Jersey and Staten Island in the aftermath of Hurricane Sandy. Vulnerable areas were identified using anomaly detection and the results were mapped against measurements collected on the ground. A correlation coefficient of 0.78 was obtained. Uncertainty in model predictions was evaluated using Monte Carlo simulations.

The perceptions of teachers and principals toward providing additional compensation to teachers in high-need subject areas

NASA Astrophysics Data System (ADS)

Longing, Jeffrey Lucian

The purpose of this study was to determine possible differences in the perceptions of teachers teaching in high-need areas (i.e., math, science, special education, etc.) and teachers not teaching in high-need areas, (i.e., business education, physical education, etc.) as defined by the states of Arkansas and Louisiana, regarding higher compensation for high-need teachers. In addition, possible perception differences among principals and teachers were determined. The independent variables consisted of gender, position held, years of certified experience, and certification areas. The dependent variable was the perceptions of the participants on providing higher compensation for high-need teachers in order to attract and retain them. The data for all variables were collected using the Teacher Compensation Survey. The sample for this study was limited to teachers, grades 9 through 12, and principals of public high schools in south Arkansas and north Louisiana. Forty-four school districts in south Arkansas (Arkansas Department of Education, 2008a) and north Louisiana (Louisiana Department of Education, 2008a) met the criteria for this study. Twenty-two superintendents gave permission for their districts to participate in the research. A sample of 849 teachers and 38 principals were identified in these districts. Surveys were returned from 350 teachers, creating a 41% response rate. When the 31 principals that returned surveys were added to the total population, the response rate increased to 43% with 381 of the 887 surveyed responding. However, 42 of the teachers and two of the principals skipped some of the questions on the survey and were not included in the study. The researcher used a One-Way ANOVA and independent t-tests to determine the presence of statistical differences at the .05 level. The data showed that most math and science teachers agreed that high-need teachers should be compensated at a higher rate than teachers not teaching in high-need areas. The data

Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets

NASA Astrophysics Data System (ADS)

Li, Ling; Tirado, Angelica; Nlebedim, I. C.; Rios, Orlando; Post, Brian; Kunc, Vlastimil; Lowden, R. R.; Lara-Curzio, Edgar; Fredette, Robert; Ormerod, John; Lograsso, Thomas A.; Paranthaman, M. Parans

2016-10-01

Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing (BAAM) - to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical properties comparable or better than those of traditional injection molded magnets. The starting polymer magnet composite pellets consist of 65 vol% isotropic NdFeB powder and 35 vol% polyamide (Nylon-12). The density of the final BAAM magnet product reached 4.8 g/cm3, and the room temperature magnetic properties are: intrinsic coercivity Hci = 688.4 kA/m, remanence Br = 0.51 T, and energy product (BH)max = 43.49 kJ/m3 (5.47 MGOe). In addition, tensile tests performed on four dog-bone shaped specimens yielded an average ultimate tensile strength of 6.60 MPa and an average failure strain of 4.18%. Scanning electron microscopy images of the fracture surfaces indicate that the failure is primarily related to the debonding of the magnetic particles from the polymer binder. The present method significantly simplifies manufacturing of near-net-shape bonded magnets, enables efficient use of rare earth elements thus contributing towards enriching the supply of critical materials.

Big area additive manufacturing of high performance bonded NdFeB magnets

DOE PAGES

Li, Ling; Tirado, Angelica; Nlebedim, I. C.; ...

2016-10-31

Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing (BAAM) - to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical properties comparable or better than those of traditional injection molded magnets. The starting polymer magnet composite pellets consist of 65 vol% isotropic NdFeB powder and 35 vol% polyamide (Nylon-12). The density of the final BAAM magnet product reached 4.8 g/cm3, and the room temperature magnetic propertiesmore » are: intrinsic coercivity Hci = 688.4 kA/m, remanence B r = 0.51 T, and energy product (BH) max = 43.49 kJ/m 3 (5.47 MGOe). In addition, tensile tests performed on four dog-bone shaped specimens yielded an average ultimate tensile strength of 6.60 MPa and an average failure strain of 4.18%. Scanning electron microscopy images of the fracture surfaces indicate that the failure is primarily related to the debonding of the magnetic particles from the polymer binder. As a result, the present method significantly simplifies manufacturing of near-net-shape bonded magnets, enables efficient use of rare earth elements thus contributing towards enriching the supply of critical materials.« less

Big area additive manufacturing of high performance bonded NdFeB magnets

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Ling; Tirado, Angelica; Nlebedim, I. C.

Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing (BAAM) - to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical properties comparable or better than those of traditional injection molded magnets. The starting polymer magnet composite pellets consist of 65 vol% isotropic NdFeB powder and 35 vol% polyamide (Nylon-12). The density of the final BAAM magnet product reached 4.8 g/cm3, and the room temperature magnetic propertiesmore » are: intrinsic coercivity Hci = 688.4 kA/m, remanence B r = 0.51 T, and energy product (BH) max = 43.49 kJ/m 3 (5.47 MGOe). In addition, tensile tests performed on four dog-bone shaped specimens yielded an average ultimate tensile strength of 6.60 MPa and an average failure strain of 4.18%. Scanning electron microscopy images of the fracture surfaces indicate that the failure is primarily related to the debonding of the magnetic particles from the polymer binder. As a result, the present method significantly simplifies manufacturing of near-net-shape bonded magnets, enables efficient use of rare earth elements thus contributing towards enriching the supply of critical materials.« less

Using Landsat 5 TM Data to Identify and Map Areas of Mangrove in Tulum, Quintana Roo, Mexico

NASA Astrophysics Data System (ADS)

Meachum, Samuel Standish

Mangroves are recognized worldwide as a major ecosystem that provides significant ecosystem services. They are threatened due to rising pressures from human overpopulation and economic development. The Caribbean Coast of Mexico's Yucatan Peninsula contains mangrove habitat that have been negatively impacted by the development of the region's tourist industry. However, little research has been done to map and quantify the extent of mangrove in the region. This study used remote sensing techniques to identify mangrove in the Municipality of Tulum located in Quintana Roo, and to produce an accurate vector based thematic map that inventories these areas. Anatomical differences were analyzed and related to high-resolution field spectral data for each mangrove species. A vector map of mangrove habitat, including areas of inland mangrove, was produced with an overall accuracy of 88%. The 19,262 ha. of mangrove identified by this study represents a 140% increase in area over previous studies.

Creating Protected Areas on Public Lands: Is There Room for Additional Conservation?

PubMed

Arriagada, Rodrigo A; Echeverria, Cristian M; Moya, Danisa E

2016-01-01

Most evaluations of the effectiveness of PAs have relied on indirect estimates based on comparisons between protected and unprotected areas. Such methods can be biased when protection is not randomly assigned. We add to the growing literature on the impact of PAs by answering the following research questions: What is the impact of Chilean PAs on deforestation which occurred between 1986 and 2011? How do estimates of the impact of PAs vary when using only public land as control units? We show that the characteristics of the areas in which protected and unprotected lands are located differ significantly. To satisfactorily estimate the effects of PAs, we use matching methods to define adequate control groups, but not as in previous research. We construct control groups using separately non-protected private areas and non-protected public lands. We find that PAs avoid deforestation when using unprotected private lands as valid controls, however results show no impact when the control group is based only on unprotected public land. Different land management regimes, and higher levels of enforcement inside public lands may reduce the opportunity to add additional conservation benefits when the national systems for PAs are based on the protection of previously unprotected public lands. Given that not all PAs are established to avoid deforestation, results also admit the potential for future studies to include other outcomes including forest degradation (not just deforestation), biodiversity, wildlife, primary forests (not forests in general), among others.

Creating Protected Areas on Public Lands: Is There Room for Additional Conservation?

PubMed Central

Arriagada, Rodrigo A.; Echeverria, Cristian M.; Moya, Danisa E.

2016-01-01

Most evaluations of the effectiveness of PAs have relied on indirect estimates based on comparisons between protected and unprotected areas. Such methods can be biased when protection is not randomly assigned. We add to the growing literature on the impact of PAs by answering the following research questions: What is the impact of Chilean PAs on deforestation which occurred between 1986 and 2011? How do estimates of the impact of PAs vary when using only public land as control units? We show that the characteristics of the areas in which protected and unprotected lands are located differ significantly. To satisfactorily estimate the effects of PAs, we use matching methods to define adequate control groups, but not as in previous research. We construct control groups using separately non-protected private areas and non-protected public lands. We find that PAs avoid deforestation when using unprotected private lands as valid controls, however results show no impact when the control group is based only on unprotected public land. Different land management regimes, and higher levels of enforcement inside public lands may reduce the opportunity to add additional conservation benefits when the national systems for PAs are based on the protection of previously unprotected public lands. Given that not all PAs are established to avoid deforestation, results also admit the potential for future studies to include other outcomes including forest degradation (not just deforestation), biodiversity, wildlife, primary forests (not forests in general), among others. PMID:26848856

Genotypic variability-based genome-wide association study identifies non-additive loci HLA-C and IL12B for psoriasis.

PubMed

Wei, Wen-Hua; Massey, Jonathan; Worthington, Jane; Barton, Anne; Warren, Richard B

2018-03-01

Genome-wide association studies (GWASs) have identified a number of loci for psoriasis but largely ignored non-additive effects. We report a genotypic variability-based GWAS (vGWAS) that can prioritize non-additive loci without requiring prior knowledge of interaction types or interacting factors in two steps, using a mixed model to partition dichotomous phenotypes into an additive component and non-additive environmental residuals on the liability scale and then the Levene's (Brown-Forsythe) test to assess equality of the residual variances across genotype groups genome widely. The vGWAS identified two genome-wide significant (P < 5.0e-08) non-additive loci HLA-C and IL12B that were also genome-wide significant in an accompanying GWAS in the discovery cohort. Both loci were statistically replicated in vGWAS of an independent cohort with a small sample size. HLA-C and IL12B were reported in moderate gene-gene and/or gene-environment interactions in several occasions. We found a moderate interaction with age-of-onset of psoriasis, which was replicated indirectly. The vGWAS also revealed five suggestive loci (P < 6.76e-05) including FUT2 that was associated with psoriasis with environmental aspects triggered by virus infection and/or metabolic factors. Replication and functional investigation are needed to validate the suggestive vGWAS loci.

Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets

PubMed Central

Li, Ling; Tirado, Angelica; Nlebedim, I. C.; Rios, Orlando; Post, Brian; Kunc, Vlastimil; Lowden, R. R.; Lara-Curzio, Edgar; Fredette, Robert; Ormerod, John; Lograsso, Thomas A.; Paranthaman, M. Parans

2016-01-01

Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing (BAAM) - to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical properties comparable or better than those of traditional injection molded magnets. The starting polymer magnet composite pellets consist of 65 vol% isotropic NdFeB powder and 35 vol% polyamide (Nylon-12). The density of the final BAAM magnet product reached 4.8 g/cm3, and the room temperature magnetic properties are: intrinsic coercivity Hci = 688.4 kA/m, remanence Br = 0.51 T, and energy product (BH)max = 43.49 kJ/m3 (5.47 MGOe). In addition, tensile tests performed on four dog-bone shaped specimens yielded an average ultimate tensile strength of 6.60 MPa and an average failure strain of 4.18%. Scanning electron microscopy images of the fracture surfaces indicate that the failure is primarily related to the debonding of the magnetic particles from the polymer binder. The present method significantly simplifies manufacturing of near-net-shape bonded magnets, enables efficient use of rare earth elements thus contributing towards enriching the supply of critical materials. PMID:27796339

Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets.

PubMed

Li, Ling; Tirado, Angelica; Nlebedim, I C; Rios, Orlando; Post, Brian; Kunc, Vlastimil; Lowden, R R; Lara-Curzio, Edgar; Fredette, Robert; Ormerod, John; Lograsso, Thomas A; Paranthaman, M Parans

2016-10-31

Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing (BAAM) - to fabricate isotropic near-net-shape NdFeB bonded magnets with magnetic and mechanical properties comparable or better than those of traditional injection molded magnets. The starting polymer magnet composite pellets consist of 65 vol% isotropic NdFeB powder and 35 vol% polyamide (Nylon-12). The density of the final BAAM magnet product reached 4.8 g/cm 3 , and the room temperature magnetic properties are: intrinsic coercivity H ci  = 688.4 kA/m, remanence B r  = 0.51 T, and energy product (BH) max  = 43.49 kJ/m 3 (5.47 MGOe). In addition, tensile tests performed on four dog-bone shaped specimens yielded an average ultimate tensile strength of 6.60 MPa and an average failure strain of 4.18%. Scanning electron microscopy images of the fracture surfaces indicate that the failure is primarily related to the debonding of the magnetic particles from the polymer binder. The present method significantly simplifies manufacturing of near-net-shape bonded magnets, enables efficient use of rare earth elements thus contributing towards enriching the supply of critical materials.

Identifying areas of high risk of human exposure to coccidioidomycosis in Texas using serology data from dogs.

PubMed

Gautam, R; Srinath, I; Clavijo, A; Szonyi, B; Bani-Yaghoub, M; Park, S; Ivanek, R

2013-03-01

Coccidioidomycosis or Valley Fever (VF) is an emerging soil-borne fungal zoonosis affecting humans and animals. Most non-human cases of VF are found in dogs, which we hypothesize may serve as sentinels for estimating the human exposure risk. The objective of this study is to use the spatial and temporal distribution and clusters of dogs seropositive for VF to define the geographic area in Texas where VF is endemic, and thus presents a higher risk of exposure to humans. The included specimens were seropositive dogs tested at a major diagnostic laboratory between 1999 and 2009. Data were aggregated by zip code and smoothed by empirical Bayesian estimation to develop an isopleth map of VF seropositive rates using kriging. Clusters of seropositive dogs were identified using the spatial scan test. Both the isopleth map and the scan test identified an area with a high rate of VF-seropositive dogs in the western and southwestern parts of Texas (relative risk = 31). This location overlapped an area that was previously identified as a potential endemic region based on human surveys. Together, these data suggest that dogs may serve as sentinels for estimating the risk of human exposure to VF. © 2012 Blackwell Verlag GmbH.

Use of dust storm observations on satellite images to identify areas vulnerable to severe wind erosion

USGS Publications Warehouse

Breed, C.S.; McCauley, J.F.

1986-01-01

Blowing dust is symptomatic of severe wind erosion and deterioration of soils in areas undergoing dessication and/or devegetation. Dust plumes on satellite images can commonly be traced to sources in marginally arable semiarid areas where protective lag gravels or vegetation have been removed and soils are dry, as demonstrated for the Portales Valley, New Mexico. Images from Landsat and manned orbiters such as Skylab and the Space Shuttle are useful for illustrating the regional relations of airborne dust plumes to source areas. Geostationary satellites such as GOES are useful in tracking the time-histories of episodic dust storms. These events sometimes go unrecognized by weather observers and are the precursors of long-term land degradation trends. In areas where soil maps and meteorological data are inadequate, satellite images provide a means for identifying problem areas where measures are needed to control or mitigate wind erosion. ?? 1986 D. Reidel Publishing Company.

White spots in pharmaceutical pipelines-EMA identifies potential areas of unmet medical needs.

PubMed

Papaluca, Marisa; Greco, Martina; Tognana, Enrico; Ehmann, Falk; Saint-Raymond, Agnès

2015-05-01

Unmet medical needs are a priority for organizations such as the WHO and major public-private initiatives, such as Innovative Medicines Initiative, were established to speed up the development of better and safer medicines for patients. To assist such projects, the EMA in its 'Road Map to 2015' considered the mapping of unmet medical needs as a priority. This study has identified medical conditions for which the EMA could not identify developments in the pharmaceutical pipelines, that is, 'white spots'. Our analysis was made using external data sources as well as mining data of the EMA. The main areas for white spots were oncology, infectious diseases and certain psychiatric conditions. According to our data and a review of literature, in a number of these white spots, diagnostic tools may even be missing. The identification of those conditions will benefit stakeholders, including regulators, research funding bodies and patients' organizations.

76 FR 5679 - Emerald Ash Borer; Addition of Quarantined Areas in Kentucky, Michigan, Minnesota, New York...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-02

...;Prices of new books are listed in the first FEDERAL REGISTER issue of each #0;week. #0; #0; #0; #0;#0...-0098] Emerald Ash Borer; Addition of Quarantined Areas in Kentucky, Michigan, Minnesota, New York..., Minnesota, New York, Pennsylvania, Wisconsin, and the entire State of West Virginia to the list of...

10 CFR 60.132 - Additional design criteria for surface facilities in the geologic repository operations area.

Code of Federal Regulations, 2014 CFR

2014-01-01

... conversion to a form suitable for disposal at an alternative site in accordance with any regulations that are... 10 Energy 2 2014-01-01 2014-01-01 false Additional design criteria for surface facilities in the geologic repository operations area. 60.132 Section 60.132 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED...

10 CFR 60.132 - Additional design criteria for surface facilities in the geologic repository operations area.

Code of Federal Regulations, 2012 CFR

2012-01-01

... conversion to a form suitable for disposal at an alternative site in accordance with any regulations that are... 10 Energy 2 2012-01-01 2012-01-01 false Additional design criteria for surface facilities in the geologic repository operations area. 60.132 Section 60.132 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED...

10 CFR 60.132 - Additional design criteria for surface facilities in the geologic repository operations area.

Code of Federal Regulations, 2013 CFR

2013-01-01

... conversion to a form suitable for disposal at an alternative site in accordance with any regulations that are... 10 Energy 2 2013-01-01 2013-01-01 false Additional design criteria for surface facilities in the geologic repository operations area. 60.132 Section 60.132 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED...

10 CFR 60.132 - Additional design criteria for surface facilities in the geologic repository operations area.

Code of Federal Regulations, 2011 CFR

2011-01-01

... conversion to a form suitable for disposal at an alternative site in accordance with any regulations that are... 10 Energy 2 2011-01-01 2011-01-01 false Additional design criteria for surface facilities in the geologic repository operations area. 60.132 Section 60.132 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED...

Forest and rangeland ecosystem condition indicators: identifying national areas of opportunity using data development analysis

Treesearch

John G. Hof; Curtis H. Flather; Tony J. Baltic; Rudy M. King

2004-01-01

This article reports the methodology and results of a data envelopment analysis (DEA) that attempts to identify areas in the country where there is maximum potential for improving the forest and rangeland condition, based on 12 indicator variables. This analysis differs from previous DEA studies in that the primary variables are measures of human activity and...

Areas of Weakly Anomalous to Anomalous Surface Temperature in Chaffee County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

Note: This "Weakly Anomalous to Anomalous Surface Temperature" dataset differs from the "Anomalous Surface Temperature" dataset for this county (another remotely sensed CIRES product) by showing areas of modeled temperatures between 1o and 2o above the mean, as opposed to the greater than 2o temperatures contained in the "Anomalous Surface Temperature" dataset. This layer contains areas of anomalous surface temperature in Chaffee County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma.

Areas of Weakly Anomalous to Anomalous Surface Temperature in Garfield County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

Note: This "Weakly Anomalous to Anomalous Surface Temperature" dataset differs from the "Anomalous Surface Temperature" dataset for this county (another remotely sensed CIRES product) by showing areas of modeled temperatures between 1o and 2o above the mean, as opposed to the greater than 2o temperatures contained in the "Anomalous Surface Temperature" dataset. This layer contains areas of anomalous surface temperature in Garfield County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature between 1o and 2o were considered ASTER modeled warm surface exposures (thermal anomalies) Note: 'o' is used in this description to represent lowercase sigma.

Areas of Weakly Anomalous to Anomalous Surface Temperature in Routt County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

Note: This "Weakly Anomalous to Anomalous Surface Temperature" dataset differs from the "Anomalous Surface Temperature" dataset for this county (another remotely sensed CIRES product) by showing areas of modeled temperatures between 1o and 2o above the mean, as opposed to the greater than 2o temperatures contained in the "Anomalous Surface Temperature" dataset. This layer contains areas of anomalous surface temperature in Routt County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature between 1o and 2o were considered ASTER modeled warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma.

Areas of Weakly Anomalous to Anomalous Surface Temperature in Dolores County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

Note: This "Weakly Anomalous to Anomalous Surface Temperature" dataset differs from the "Anomalous Surface Temperature" dataset for this county (another remotely sensed CIRES product) by showing areas of modeled temperatures between 1o and 2o above the mean, as opposed to the greater than 2o temperatures contained in the "Anomalous Surface Temperature" dataset. This layer contains areas of anomalous surface temperature in Dolores County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature greater than 2o were considered ASTER modeled very warm surface exposures (thermal anomalies) Note: 'o' is used in this description to represent lowercase sigma.

Areas of Weakly Anomalous to Anomalous Surface Temperature in Archuleta County, Colorado, as Identified from ASTER Thermal Data

DOE Data Explorer

Khalid Hussein

2012-02-01

Note: This "Weakly Anomalous to Anomalous Surface Temperature" dataset differs from the "Anomalous Surface Temperature" dataset for this county (another remotely sensed CIRES product) by showing areas of modeled temperatures between 1o and 2o above the mean, as opposed to the greater than 2o temperatures contained in the "Anomalous Surface Temperature" dataset. This layer contains areas of anomalous surface temperature in Archuleta County identified from ASTER thermal data and spatial based insolation model. The temperature is calculated using the Emissivity Normalization Algorithm that separate temperature from emissivity. The incoming solar radiation was calculated using spatial based insolation model developed by Fu and Rich (1999). Then the temperature due to solar radiation was calculated using emissivity derived from ASTER data. The residual temperature, i.e. temperature due to solar radiation subtracted from ASTER temperature was used to identify thermally anomalous areas. Areas that had temperature between 1o and 2o were considered ASTER modeled warm surface exposures (thermal anomalies). Note: 'o' is used in this description to represent lowercase sigma.

Feasibility of using Big Area Additive Manufacturing to Directly Manufacture Boat Molds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Post, Brian K.; Chesser, Phillip C.; Lind, Randall F.

The goal of this project was to explore the feasibility of using Big Area Additive Manufacturing (BAAM) to directly manufacture a boat mold without the need for coatings. All prior tooling projects with BAAM required the use to thick coatings to overcome the surface finish limitations of the BAAM process. While the BAAM process significantly lowers the cost of building the mold, the high cost element rapidly became the coatings (cost of the material, labor on coating, and finishing). As an example, the time and cost to manufacture the molds for the Wind Turbine project with TPI Composites Inc. andmore » the molds for the submarine project with Carderock Naval Warfare Systems was a fraction of the time and cost of the coatings. For this project, a catamaran boat hull mold was designed, manufactured, and assembled with an additional 0.15” thickness of material on all mold surfaces. After printing, the mold was immediately machined and assembled. Alliance MG, LLC (AMG), the industry partner of this project, experimented with mold release agents on the carbon-fiber reinforced acrylonitrile butadiene styrene (CF ABS) to verify that the material can be directly used as a mold (rather than needing a coating). In addition, for large molds (such as the wind turbine mold with TPI Composites Inc.), the mold only provided the target surface. A steel subframe had to be manufactured to provide structural integrity. If successful, this will significantly reduce the time and cost necessary for manufacturing large resin infusion molds using the BAAM process.« less

Coherent addition of high power broad-area laser diodes with a compact VBG V-shaped external Talbot cavity

DOE PAGES

Liu, Bo; Braiman, Yehuda

2018-02-06

In this paper, we introduced a compact V-shaped external Talbot cavity for phase locking of high power broad-area laser diodes. The length of compact cavity is ~25 mm. Near diffraction-limit coherent addition of 10 broad-area laser diodes indicated that high quality phase locking was achieved. We measured the near-field emission mode of each individual broad-area laser diode with different feedback, such as a volume Bragg grating and a high reflection mirror. Finally, we found out that the best result of phase locking broad-area laser diodes was achieved by the compact V-shaped external Talbot cavity with volume Bragg grating feedback.

Coherent addition of high power broad-area laser diodes with a compact VBG V-shaped external Talbot cavity

NASA Astrophysics Data System (ADS)

Liu, Bo; Braiman, Yehuda

2018-05-01

We introduced a compact V-shaped external Talbot cavity for phase locking of high power broad-area laser diodes. The length of compact cavity is ∼25 mm. Near diffraction-limit coherent addition of 10 broad-area laser diodes indicated that high quality phase locking was achieved. We measured the near-field emission mode of each individual broad-area laser diode with different feedback, such as a volume Bragg grating and a high reflection mirror. We found out that the best result of phase locking broad-area laser diodes was achieved by the compact V-shaped external Talbot cavity with volume Bragg grating feedback.

Coherent addition of high power broad-area laser diodes with a compact VBG V-shaped external Talbot cavity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Liu, Bo; Braiman, Yehuda

In this paper, we introduced a compact V-shaped external Talbot cavity for phase locking of high power broad-area laser diodes. The length of compact cavity is ~25 mm. Near diffraction-limit coherent addition of 10 broad-area laser diodes indicated that high quality phase locking was achieved. We measured the near-field emission mode of each individual broad-area laser diode with different feedback, such as a volume Bragg grating and a high reflection mirror. Finally, we found out that the best result of phase locking broad-area laser diodes was achieved by the compact V-shaped external Talbot cavity with volume Bragg grating feedback.

Meta-analysis identifies 29 additional ulcerative colitis risk loci, increasing the number of confirmed associations to 47.

PubMed

Anderson, Carl A; Boucher, Gabrielle; Lees, Charlie W; Franke, Andre; D'Amato, Mauro; Taylor, Kent D; Lee, James C; Goyette, Philippe; Imielinski, Marcin; Latiano, Anna; Lagacé, Caroline; Scott, Regan; Amininejad, Leila; Bumpstead, Suzannah; Baidoo, Leonard; Baldassano, Robert N; Barclay, Murray; Bayless, Theodore M; Brand, Stephan; Büning, Carsten; Colombel, Jean-Frédéric; Denson, Lee A; De Vos, Martine; Dubinsky, Marla; Edwards, Cathryn; Ellinghaus, David; Fehrmann, Rudolf S N; Floyd, James A B; Florin, Timothy; Franchimont, Denis; Franke, Lude; Georges, Michel; Glas, Jürgen; Glazer, Nicole L; Guthery, Stephen L; Haritunians, Talin; Hayward, Nicholas K; Hugot, Jean-Pierre; Jobin, Gilles; Laukens, Debby; Lawrance, Ian; Lémann, Marc; Levine, Arie; Libioulle, Cecile; Louis, Edouard; McGovern, Dermot P; Milla, Monica; Montgomery, Grant W; Morley, Katherine I; Mowat, Craig; Ng, Aylwin; Newman, William; Ophoff, Roel A; Papi, Laura; Palmieri, Orazio; Peyrin-Biroulet, Laurent; Panés, Julián; Phillips, Anne; Prescott, Natalie J; Proctor, Deborah D; Roberts, Rebecca; Russell, Richard; Rutgeerts, Paul; Sanderson, Jeremy; Sans, Miquel; Schumm, Philip; Seibold, Frank; Sharma, Yashoda; Simms, Lisa A; Seielstad, Mark; Steinhart, A Hillary; Targan, Stephan R; van den Berg, Leonard H; Vatn, Morten; Verspaget, Hein; Walters, Thomas; Wijmenga, Cisca; Wilson, David C; Westra, Harm-Jan; Xavier, Ramnik J; Zhao, Zhen Z; Ponsioen, Cyriel Y; Andersen, Vibeke; Torkvist, Leif; Gazouli, Maria; Anagnou, Nicholas P; Karlsen, Tom H; Kupcinskas, Limas; Sventoraityte, Jurgita; Mansfield, John C; Kugathasan, Subra; Silverberg, Mark S; Halfvarson, Jonas; Rotter, Jerome I; Mathew, Christopher G; Griffiths, Anne M; Gearry, Richard; Ahmad, Tariq; Brant, Steven R; Chamaillard, Mathias; Satsangi, Jack; Cho, Judy H; Schreiber, Stefan; Daly, Mark J; Barrett, Jeffrey C; Parkes, Miles; Annese, Vito; Hakonarson, Hakon; Radford-Smith, Graham; Duerr, Richard H; Vermeire, Séverine; Weersma, Rinse K; Rioux, John D

2011-03-01

Genome-wide association studies and candidate gene studies in ulcerative colitis have identified 18 susceptibility loci. We conducted a meta-analysis of six ulcerative colitis genome-wide association study datasets, comprising 6,687 cases and 19,718 controls, and followed up the top association signals in 9,628 cases and 12,917 controls. We identified 29 additional risk loci (P < 5 × 10(-8)), increasing the number of ulcerative colitis-associated loci to 47. After annotating associated regions using GRAIL, expression quantitative trait loci data and correlations with non-synonymous SNPs, we identified many candidate genes that provide potentially important insights into disease pathogenesis, including IL1R2, IL8RA-IL8RB, IL7R, IL12B, DAP, PRDM1, JAK2, IRF5, GNA12 and LSP1. The total number of confirmed inflammatory bowel disease risk loci is now 99, including a minimum of 28 shared association signals between Crohn's disease and ulcerative colitis.

Identifying key areas of ecosystem services potential to improve ecological management in Chongqing City, southwest China.

PubMed

Xiao, Yang; Xiao, Qiang

2018-03-29

Because natural ecosystems and ecosystem services (ES) are both critical to the well-being of humankind, it is important to understand their relationships and congruence for conservation planning. Spatial conservation planning is required to set focused preservation priorities and to assess future ecological implications. This study uses the combined measures of ES models and ES potential to estimate and analyze all four groups of ecosystem services to generate opportunities to maximize ecosystem services. Subsequently, we identify the key areas of conservation priorities as future forestation and conservation hotspot zones to improve the ecological management in Chongqing City, located in the upper reaches of the Three Gorges Reservoir Area, China. Results show that ecosystem services potential is extremely obvious. Compared to ecosystem services from 2000, we determined that soil conservation could be increased by 59.11%, carbon sequestration by 129.51%, water flow regulation by 83.42%, and water purification by 84.42%. According to our prioritization results, approximately 48% of area converted to forests exhibited high improvements in all ecosystem services (categorized as hotspot-1, hotspot-2, and hotspot-3). The hotspots identified in this study can be used as an excellent surrogate for evaluation ecological engineering benefits and can be effectively applied in improving ecological management planning.

Utilizing NASA Earth Observations to Monitor Sinkhole Development and Identify Risk Areas in Dougherty County, Georgia

NASA Astrophysics Data System (ADS)

Cahalan, M. D.; Berry, K.; Amin, M.; Xu, W.; Hu, T.; Milewski, A.

2015-12-01

Located in southwest Georgia, Dougherty County has a growing populace in an agricultural region that relies heavily on groundwater resources. Partly due to escalated groundwater extraction, this area has experienced an increase in sinkhole development over the last decade. Sinkholes pose a threat to infrastructure development, groundwater pollution, and land use operations. The NASA DEVELOP Georgia Disasters and Water Resources team partnered with the City of Albany and Dougherty County Planning and Development Services (PDS) and the Southwest Georgia Water Resources Task Force (SGWRTF) to assess past sinkhole development and identify areas susceptible to future sinkhole formation. Sinkhole mapping was completed utilizing a time-series of elevation data (1999 - 2011) from NASA's SRTM and ASTER missions, as well as European Remote-Sensing (ERS-1 and 2) satellite-derived elevation data. The sinkhole inventory maps and spatial statistical techniques (i.e., geographically-weighted regression) were employed to quantify the factors most influential in sinkhole development. With those results, the susceptibility of every area within Dougherty County to future sinkhole formation was identified. The results of this applied science project will enable the PDS and SGWRTF to make informed decisions on current and future land use, safe infrastructure development, and sustainable water resource management.

Using a distribution and conservation status weighted hotspot approach to identify areas in need of conservation action to benefit Idaho bird species

USGS Publications Warehouse

Haines, Aaron M.; Leu, Matthias; Svancara, Leona K.; Wilson, Gina; Scott, J. Michael

2010-01-01

Identification of biodiversity hotspots (hereafter, hotspots) has become a common strategy to delineate important areas for wildlife conservation. However, the use of hotspots has not often incorporated important habitat types, ecosystem services, anthropogenic activity, or consistency in identifying important conservation areas. The purpose of this study was to identify hotspots to improve avian conservation efforts for Species of Greatest Conservation Need (SGCN) in the state of Idaho, United States. We evaluated multiple approaches to define hotspots and used a unique approach based on weighting species by their distribution size and conservation status to identify hotspot areas. All hotspot approaches identified bodies of water (Bear Lake, Grays Lake, and American Falls Reservoir) as important hotspots for Idaho avian SGCN, but we found that the weighted approach produced more congruent hotspot areas when compared to other hotspot approaches. To incorporate anthropogenic activity into hotspot analysis, we grouped species based on their sensitivity to specific human threats (i.e., urban development, agriculture, fire suppression, grazing, roads, and logging) and identified ecological sections within Idaho that may require specific conservation actions to address these human threats using the weighted approach. The Snake River Basalts and Overthrust Mountains ecological sections were important areas for potential implementation of conservation actions to conserve biodiversity. Our approach to identifying hotspots may be useful as part of a larger conservation strategy to aid land managers or local governments in applying conservation actions on the ground.

Synthesis and characterization of high-surface-area millimeter-sized silica beads with hierarchical multi-modal pore structure by the addition of agar

DOE Office of Scientific and Technical Information (OSTI.GOV)

Han, Yosep; Choi, Junhyun; Tong, Meiping, E-mail: tongmeiping@iee.pku.edu.cn

2014-04-01

Millimeter-sized spherical silica foams (SSFs) with hierarchical multi-modal pore structure featuring high specific surface area and ordered mesoporous frameworks were successfully prepared using aqueous agar addition, foaming and drop-in-oil processes. The pore-related properties of the prepared spherical silica (SSs) and SSFs were systematically characterized by field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), small-angle X-ray diffraction (SAXRD), Hg intrusion porosimetry, and N{sub 2} adsorption–desorption isotherm measurements. Improvements in the BET surface area and total pore volume were observed at 504 m{sup 2} g{sup −1} and 5.45 cm{sup 3} g{sup −1}, respectively, after an agar addition and foaming process. Despitemore » the increase in the BET surface area, the mesopore wall thickness and the pore size of the mesopores generated from the block copolymer with agar addition were unchanged based on the SAXRD, TEM, and BJH methods. The SSFs prepared in the present study were confirmed to have improved BET surface area and micropore volume through the agar loading, and to exhibit interconnected 3-dimensional network macropore structure leading to the enhancement of total porosity and BET surface area via the foaming process. - Highlights: • Millimeter-sized spherical silica foams (SSFs) are successfully prepared. • SSFs exhibit high BET surface area and ordered hierarchical pore structure. • Agar addition improves BET surface area and micropore volume of SSFs. • Foaming process generates interconnected 3-D network macropore structure of SSFs.« less

American Bird conservancy's approach to the U.S. Important Bird Area Program - identifying the top 500 global sites

Treesearch

Robert M. Chipley

2005-01-01

The idea for the Important Bird Area Program originated in a series of studies in the early 1980s conducted by BirdLife International. Recognizing that these studies could become a powerful tool for conservation, BirdLife International began an effort to identify and gather data regarding the most important areas for birds in Europe and to make this information...

Volume 3a - Area Source Methods - Additional Documents

EPA Pesticide Factsheets

Nonpoint (area) source emission reference materials from the Emissions Inventory Improvement Program (EIIP). Provides nonpoint source guidance on ammonia emissions from natural landscapes, fertilized soils, and nonagricultural sources.

Quantile regression and Bayesian cluster detection to identify radon prone areas.

PubMed

Sarra, Annalina; Fontanella, Lara; Valentini, Pasquale; Palermi, Sergio

2016-11-01

Albeit the dominant source of radon in indoor environments is the geology of the territory, many studies have demonstrated that indoor radon concentrations also depend on dwelling-specific characteristics. Following a stepwise analysis, in this study we propose a combined approach to delineate radon prone areas. We first investigate the impact of various building covariates on indoor radon concentrations. To achieve a more complete picture of this association, we exploit the flexible formulation of a Bayesian spatial quantile regression, which is also equipped with parameters that controls the spatial dependence across data. The quantitative knowledge of the influence of each significant building-specific factor on the measured radon levels is employed to predict the radon concentrations that would have been found if the sampled buildings had possessed standard characteristics. Those normalised radon measures should reflect the geogenic radon potential of the underlying ground, which is a quantity directly related to the geological environment. The second stage of the analysis is aimed at identifying radon prone areas, and to this end, we adopt a Bayesian model for spatial cluster detection using as reference unit the building with standard characteristics. The case study is based on a data set of more than 2000 indoor radon measures, available for the Abruzzo region (Central Italy) and collected by the Agency of Environmental Protection of Abruzzo, during several indoor radon monitoring surveys. Copyright © 2016 Elsevier Ltd. All rights reserved.

An Integrated Model for Identifying Desertification risk areas, using Fuzzy Membership and Geospatial Technique - A Case Study, Kota District, Rajasthan

NASA Astrophysics Data System (ADS)

Dasgupta, Arunima; Dhinwa, P. S.; Sastry, K. L. N.; Ajai, A.

2012-07-01

Desertification, in other words the land degradation in drylands, is one of the alarming environmental problems now a days. It is important to estimate the risk of desertification in order to take proper measures for its prevention. The present research intends to identify the areas under the risk of desertification along with their severity in terms of degradation in natural parameters. The study adopted an integrated Model with fuzzy membership analysis and geospatial techniques, including four specific natural parameters namely Slope, Soil pH, soil depth and NDVI. First, parameters are classified according to their deviation from the mean. Second, the membership of each individual values is obtained to be in certain class. Here, assuming the distribution of a natural parameter to be in Gaussian manner, and Normal probability density function is used to obtain the membership of individual variable to be in a class. Thus if a single class of a single parameter is with mean μ and standard deviation σ, the values falling beyond μ+2σ and μ-2σ are not representing that class, but a transitional zone between two subsequent classes. These are the most important areas in terms of degradation, as they have the lowest probability to be in a certain class, hence highest probability to be extended or narrowed down in next or previous class respectively. Practically, these are the values which can be easily altered, under extrogenic influences, hence are identified as risk areas. Corrective methods should be applied to these vulnerable areas. The overall desertification risk is derived by incorporating the different risk severity of each parameter in GIS environment. Multi-criteria based geo-statistics are applied to locate the areas under different severity of desertification risk. In Kota, various anthropogenic pressures are accelerating land deterioration, coupled with natural erosive forces. Four major source of desertification in Kota, namely Gully and Ravine

A Spatial Approach to Identify Slum Areas in East Wara Sub-Districts, South Sulawesi

NASA Astrophysics Data System (ADS)

Anurogo, W.; Lubis, M. Z.; Pamungkas, D. S.; Hartono; Ibrahim, F. M.

2017-12-01

Spatial approach is one of the main approaches of geography, its analysis emphasizes the existence of space that serves to accommodate human activities. The dynamic development of the city area brings many impacts to the urban community’s own life patterns. The development of the city center which is the center of economic activity becomes the attraction for the community that can bring influence to the high flow of labor both from within the city itself and from outside the city area, thus causing the high flow of urbanization. Urbanization has caused an explosion in urban population and one implication is the occurrence of labor-clumping in major cities in Indonesia. Another impact of the high urbanization flow of cities is the problem of urban settlements. The more populations that come in the city, the worse the quality of the existing settlements in the city if not managed properly. This study aims to determine the location of slum areas in East Wara Sub-Districts using remote sensing technology tools and Geographic Information System (GIS). Parameters used to identify slum areas partially extracted using remote sensing data and for parameters that cannot be extracted using remote sensing data, information obtained from field surveys with information retrieval based on reference data. Analysis results for slum settlements taken from the parameters indicate that the East Wara Sub-District has the largest slum areas located in Pontap village. The village of Pontap has two classes of slums that are very shabby and slums. Slum classes are also in Surutangga Village. The result of the analysis shows that the slum settlement area has 46,324 Ha, which is only located in Pontap Village, whereas for the slum class are found in some villages of Pontap and Surutangga Urban Village, there are 37.797 Ha area. The class of slum settlement areas has the largest proportion of the area among other classes in East Wara Subdistrict. The class of slum settlement areas has an

Use of strontium isotopes to identify buried water main leakage into groundwater in a highly urbanized coastal area.

PubMed

Leung, Chi-Man; Jiao, Jiu Jimmy

2006-11-01

Previous studies indicate that the local aquifer systems in the Mid-Levels, a highly urbanized coastal area in Hong Kong, have commonly been affected by leakage from water mains. The identification of leakage locations was done by conventional water quality parameters including major and trace elements. However, these parameters may lead to ambiguous results and fail to identify leakage locations especially where the leakage is from drinking water mains because the chemical composition of drinking water is similar to that of natural groundwater. In this study, natural groundwater, seepage in the developed spaces, leakage from water mains, and parent aquifer materials were measured for strontium isotope (87Sr/86Sr) compositions to explore the feasibility of using these ratios to better constrain the seepage sources. The results show that the 87Sr/86Sr ratios of natural groundwater and leakage from water mains are distinctly different and thus, they can provide additional information on the sources of seepage in developed spaces. A classification system based on the aqueous 87Sr/86Sr ratio is proposed for seepage source identification.

A multi-criteria approach to identify favorable areas for goat production systems in Veracruz, México.

PubMed

Ramírez-Rivera, Emmanuel de Jesús; Lopez-Collado, Jose; Díaz-Rivera, Pablo; Ortega-Jiménez, Eusebio; Torres-Hernández, Glafiro; Jacinto-Padilla, Jazmín; Herman-Lara, Erasmo

2017-04-01

This research identifies favorable areas for goat production systems in the state of Veracruz, Mexico. Through the use of the analytic hierarchy process, layers of biophysical and soil information were combined to generate a model of favorability. Model validation was performed by calculating the area under the curve, the true skill statistic, and a qualitative comparison with census records. The results showed the existence of regions with high (4494.3 km 2 ) and moderate (2985.8 km 2 ) favorability, and these areas correspond to 6.25 and 4.15%, respectively, of the state territory and are located in the regions of Sierra de Huayacocotla, Perote, and Orizaba. These regions are characterized as mountainous and having predominantly temperate-wet or cold climates, and having montane mesophilic forests, containing pine, fir, and desert scrub. The reliability of the distribution model was supported by the area under the curve value (0.96), the true skill statistic (0.86), and consistency with census records.

Identifying additional studies for a systematic review of retention strategies in randomised controlled trials: making contact with trials units and trial methodologists.

PubMed

Brueton, Valerie; Tierney, Jayne F; Stenning, Sally; Rait, Greta

2017-08-22

Search strategies for systematic reviews aim to identify all evidence relevant to the research question posed. Reports of methodological research can be difficult to find leading to biased results in systematic reviews of research methodology. Evidence suggests that contact with investigators can help to identify unpublished research. To identify additional eligible randomised controlled trials (RCTs) for a Cochrane systematic review of strategies to improve retention in RCTs, we conducted a survey of UK clinical trials units (CTUs) and made contact with RCT methodologists. Key contacts for all UK CTUs were sent a personalised email with a short questionnaire and summary protocol of the Cochrane methodology review. The questionnaire asked whether a RCT evaluating strategies to improve retention embedded in a RCT had ever been conducted by the CTU. Questions about the stage of completion and publication of such RCTs were included. The summary protocol outlined the aims, eligibility criteria, examples of types of retention strategies, and the primary outcome for the systematic review. Personal communication with RCT methodologists and presentations of preliminary results of the review at conferences were also used to identify additional eligible RCTs. We checked the results of our standard searches to see if eligible studies identified through these additional methods were also found using our standard searches. We identified 14 of the 38 RCTs included in the Cochrane methodology review by contacting trials units and methodologists. Eleven of the 14 RCTs identified by these methods were either published in grey literature, in press or unpublished. Three remaining RCTs were fully published at the time. Six of the RCTs identified were not found through any other searches. The RCTs identified represented data for 6 of 14 RCTs of incentive strategies (52% of randomised participants included in the review), and 6 of 14 RCTs of communication strategies (52% of randomised

GIS model for identifying urban areas vulnerable to noise pollution: case study

NASA Astrophysics Data System (ADS)

Bilaşco, Ştefan; Govor, Corina; Roşca, Sanda; Vescan, Iuliu; Filip, Sorin; Fodorean, Ioan

2017-04-01

The unprecedented expansion of the national car ownership over the last few years has been determined by economic growth and the need for the population and economic agents to reduce travel time in progressively expanding large urban centres. This has led to an increase in the level of road noise and a stronger impact on the quality of the environment. Noise pollution generated by means of transport represents one of the most important types of pollution with negative effects on a population's health in large urban areas. As a consequence, tolerable limits of sound intensity for the comfort of inhabitants have been determined worldwide and the generation of sound maps has been made compulsory in order to identify the vulnerable zones and to make recommendations how to decrease the negative impact on humans. In this context, the present study aims at presenting a GIS spatial analysis model-based methodology for identifying and mapping zones vulnerable to noise pollution. The developed GIS model is based on the analysis of all the components influencing sound propagation, represented as vector databases (points of sound intensity measurements, buildings, lands use, transport infrastructure), raster databases (DEM), and numerical databases (wind direction and speed, sound intensity). Secondly, the hourly changes (for representative hours) were analysed to identify the hotspots characterised by major traffic flows specific to rush hours. The validated results of the model are represented by GIS databases and useful maps for the local public administration to use as a source of information and in the process of making decisions.

Fine-mapping identifies two additional breast cancer susceptibility loci at 9q31.2

PubMed Central

Orr, Nick; Dudbridge, Frank; Dryden, Nicola; Maguire, Sarah; Novo, Daniela; Perrakis, Eleni; Johnson, Nichola; Ghoussaini, Maya; Hopper, John L.; Southey, Melissa C.; Apicella, Carmel; Stone, Jennifer; Schmidt, Marjanka K.; Broeks, Annegien; Van't Veer, Laura J.; Hogervorst, Frans B.; Fasching, Peter A.; Haeberle, Lothar; Ekici, Arif B.; Beckmann, Matthias W.; Gibson, Lorna; Aitken, Zoe; Warren, Helen; Sawyer, Elinor; Tomlinson, Ian; Kerin, Michael J.; Miller, Nicola; Burwinkel, Barbara; Marme, Frederik; Schneeweiss, Andreas; Sohn, Chistof; Guénel, Pascal; Truong, Thérèse; Cordina-Duverger, Emilie; Sanchez, Marie; Bojesen, Stig E.; Nordestgaard, Børge G.; Nielsen, Sune F.; Flyger, Henrik; Benitez, Javier; Zamora, Maria Pilar; Arias Perez, Jose Ignacio; Menéndez, Primitiva; Anton-Culver, Hoda; Neuhausen, Susan L.; Brenner, Hermann; Dieffenbach, Aida Karina; Arndt, Volker; Stegmaier, Christa; Hamann, Ute; Brauch, Hiltrud; Justenhoven, Christina; Brüning, Thomas; Ko, Yon-Dschun; Nevanlinna, Heli; Aittomäki, Kristiina; Blomqvist, Carl; Khan, Sofia; Bogdanova, Natalia; Dörk, Thilo; Lindblom, Annika; Margolin, Sara; Mannermaa, Arto; Kataja, Vesa; Kosma, Veli-Matti; Hartikainen, Jaana M.; Chenevix-Trench, Georgia; Beesley, Jonathan; Lambrechts, Diether; Moisse, Matthieu; Floris, Guiseppe; Beuselinck, Benoit; Chang-Claude, Jenny; Rudolph, Anja; Seibold, Petra; Flesch-Janys, Dieter; Radice, Paolo; Peterlongo, Paolo; Peissel, Bernard; Pensotti, Valeria; Couch, Fergus J.; Olson, Janet E.; Slettedahl, Seth; Vachon, Celine; Giles, Graham G.; Milne, Roger L.; McLean, Catriona; Haiman, Christopher A.; Henderson, Brian E.; Schumacher, Fredrick; Le Marchand, Loic; Simard, Jacques; Goldberg, Mark S.; Labrèche, France; Dumont, Martine; Kristensen, Vessela; Alnæs, Grethe Grenaker; Nord, Silje; Borresen-Dale, Anne-Lise; Zheng, Wei; Deming-Halverson, Sandra; Shrubsole, Martha; Long, Jirong; Winqvist, Robert; Pylkäs, Katri; Jukkola-Vuorinen, Arja; Grip, Mervi; Andrulis, Irene L.; Knight, Julia A.; Glendon, Gord; Tchatchou, Sandrine; Devilee, Peter; Tollenaar, Robertus A. E. M.; Seynaeve, Caroline M.; Van Asperen, Christi J.; Garcia-Closas, Montserrat; Figueroa, Jonine; Chanock, Stephen J.; Lissowska, Jolanta; Czene, Kamila; Darabi, Hatef; Eriksson, Mikael; Klevebring, Daniel; Hooning, Maartje J.; Hollestelle, Antoinette; van Deurzen, Carolien H. M.; Kriege, Mieke; Hall, Per; Li, Jingmei; Liu, Jianjun; Humphreys, Keith; Cox, Angela; Cross, Simon S.; Reed, Malcolm W. R.; Pharoah, Paul D. P.; Dunning, Alison M.; Shah, Mitul; Perkins, Barbara J.; Jakubowska, Anna; Lubinski, Jan; Jaworska-Bieniek, Katarzyna; Durda, Katarzyna; Ashworth, Alan; Swerdlow, Anthony; Jones, Michael; Schoemaker, Minouk J.; Meindl, Alfons; Schmutzler, Rita K.; Olswold, Curtis; Slager, Susan; Toland, Amanda E.; Yannoukakos, Drakoulis; Muir, Kenneth; Lophatananon, Artitaya; Stewart-Brown, Sarah; Siriwanarangsan, Pornthep; Matsuo, Keitaro; Ito, Hidema; Iwata, Hiroji; Ishiguro, Junko; Wu, Anna H.; Tseng, Chiu-chen; Van Den Berg, David; Stram, Daniel O.; Teo, Soo Hwang; Yip, Cheng Har; Kang, Peter; Ikram, Mohammad Kamran; Shu, Xiao-Ou; Lu, Wei; Gao, Yu-Tang; Cai, Hui; Kang, Daehee; Choi, Ji-Yeob; Park, Sue K.; Noh, Dong-Young; Hartman, Mikael; Miao, Hui; Lim, Wei Yen; Lee, Soo Chin; Sangrajrang, Suleeporn; Gaborieau, Valerie; Brennan, Paul; Mckay, James; Wu, Pei-Ei; Hou, Ming-Feng; Yu, Jyh-Cherng; Shen, Chen-Yang; Blot, William; Cai, Qiuyin; Signorello, Lisa B.; Luccarini, Craig; Bayes, Caroline; Ahmed, Shahana; Maranian, Mel; Healey, Catherine S.; González-Neira, Anna; Pita, Guillermo; Alonso, M. Rosario; Álvarez, Nuria; Herrero, Daniel; Tessier, Daniel C.; Vincent, Daniel; Bacot, Francois; Hunter, David J.; Lindstrom, Sara; Dennis, Joe; Michailidou, Kyriaki; Bolla, Manjeet K.; Easton, Douglas F.; dos Santos Silva, Isabel; Fletcher, Olivia; Peto, Julian

2015-01-01

We recently identified a novel susceptibility variant, rs865686, for estrogen-receptor positive breast cancer at 9q31.2. Here, we report a fine-mapping analysis of the 9q31.2 susceptibility locus using 43 160 cases and 42 600 controls of European ancestry ascertained from 52 studies and a further 5795 cases and 6624 controls of Asian ancestry from nine studies. Single nucleotide polymorphism (SNP) rs676256 was most strongly associated with risk in Europeans (odds ratios [OR] = 0.90 [0.88–0.92]; P-value = 1.58 × 10−25). This SNP is one of a cluster of highly correlated variants, including rs865686, that spans ∼14.5 kb. We identified two additional independent association signals demarcated by SNPs rs10816625 (OR = 1.12 [1.08–1.17]; P-value = 7.89 × 10−09) and rs13294895 (OR = 1.09 [1.06–1.12]; P-value = 2.97 × 10−11). SNP rs10816625, but not rs13294895, was also associated with risk of breast cancer in Asian individuals (OR = 1.12 [1.06–1.18]; P-value = 2.77 × 10−05). Functional genomic annotation using data derived from breast cancer cell-line models indicates that these SNPs localise to putative enhancer elements that bind known drivers of hormone-dependent breast cancer, including ER-α, FOXA1 and GATA-3. In vitro analyses indicate that rs10816625 and rs13294895 have allele-specific effects on enhancer activity and suggest chromatin interactions with the KLF4 gene locus. These results demonstrate the power of dense genotyping in large studies to identify independent susceptibility variants. Analysis of associations using subjects with different ancestry, combined with bioinformatic and genomic characterisation, can provide strong evidence for the likely causative alleles and their functional basis. PMID:25652398

Fine-mapping identifies two additional breast cancer susceptibility loci at 9q31.2.

PubMed

Orr, Nick; Dudbridge, Frank; Dryden, Nicola; Maguire, Sarah; Novo, Daniela; Perrakis, Eleni; Johnson, Nichola; Ghoussaini, Maya; Hopper, John L; Southey, Melissa C; Apicella, Carmel; Stone, Jennifer; Schmidt, Marjanka K; Broeks, Annegien; Van't Veer, Laura J; Hogervorst, Frans B; Fasching, Peter A; Haeberle, Lothar; Ekici, Arif B; Beckmann, Matthias W; Gibson, Lorna; Aitken, Zoe; Warren, Helen; Sawyer, Elinor; Tomlinson, Ian; Kerin, Michael J; Miller, Nicola; Burwinkel, Barbara; Marme, Frederik; Schneeweiss, Andreas; Sohn, Chistof; Guénel, Pascal; Truong, Thérèse; Cordina-Duverger, Emilie; Sanchez, Marie; Bojesen, Stig E; Nordestgaard, Børge G; Nielsen, Sune F; Flyger, Henrik; Benitez, Javier; Zamora, Maria Pilar; Arias Perez, Jose Ignacio; Menéndez, Primitiva; Anton-Culver, Hoda; Neuhausen, Susan L; Brenner, Hermann; Dieffenbach, Aida Karina; Arndt, Volker; Stegmaier, Christa; Hamann, Ute; Brauch, Hiltrud; Justenhoven, Christina; Brüning, Thomas; Ko, Yon-Dschun; Nevanlinna, Heli; Aittomäki, Kristiina; Blomqvist, Carl; Khan, Sofia; Bogdanova, Natalia; Dörk, Thilo; Lindblom, Annika; Margolin, Sara; Mannermaa, Arto; Kataja, Vesa; Kosma, Veli-Matti; Hartikainen, Jaana M; Chenevix-Trench, Georgia; Beesley, Jonathan; Lambrechts, Diether; Moisse, Matthieu; Floris, Guiseppe; Beuselinck, Benoit; Chang-Claude, Jenny; Rudolph, Anja; Seibold, Petra; Flesch-Janys, Dieter; Radice, Paolo; Peterlongo, Paolo; Peissel, Bernard; Pensotti, Valeria; Couch, Fergus J; Olson, Janet E; Slettedahl, Seth; Vachon, Celine; Giles, Graham G; Milne, Roger L; McLean, Catriona; Haiman, Christopher A; Henderson, Brian E; Schumacher, Fredrick; Le Marchand, Loic; Simard, Jacques; Goldberg, Mark S; Labrèche, France; Dumont, Martine; Kristensen, Vessela; Alnæs, Grethe Grenaker; Nord, Silje; Borresen-Dale, Anne-Lise; Zheng, Wei; Deming-Halverson, Sandra; Shrubsole, Martha; Long, Jirong; Winqvist, Robert; Pylkäs, Katri; Jukkola-Vuorinen, Arja; Grip, Mervi; Andrulis, Irene L; Knight, Julia A; Glendon, Gord; Tchatchou, Sandrine; Devilee, Peter; Tollenaar, Robertus A E M; Seynaeve, Caroline M; Van Asperen, Christi J; Garcia-Closas, Montserrat; Figueroa, Jonine; Chanock, Stephen J; Lissowska, Jolanta; Czene, Kamila; Darabi, Hatef; Eriksson, Mikael; Klevebring, Daniel; Hooning, Maartje J; Hollestelle, Antoinette; van Deurzen, Carolien H M; Kriege, Mieke; Hall, Per; Li, Jingmei; Liu, Jianjun; Humphreys, Keith; Cox, Angela; Cross, Simon S; Reed, Malcolm W R; Pharoah, Paul D P; Dunning, Alison M; Shah, Mitul; Perkins, Barbara J; Jakubowska, Anna; Lubinski, Jan; Jaworska-Bieniek, Katarzyna; Durda, Katarzyna; Ashworth, Alan; Swerdlow, Anthony; Jones, Michael; Schoemaker, Minouk J; Meindl, Alfons; Schmutzler, Rita K; Olswold, Curtis; Slager, Susan; Toland, Amanda E; Yannoukakos, Drakoulis; Muir, Kenneth; Lophatananon, Artitaya; Stewart-Brown, Sarah; Siriwanarangsan, Pornthep; Matsuo, Keitaro; Ito, Hidema; Iwata, Hiroji; Ishiguro, Junko; Wu, Anna H; Tseng, Chiu-Chen; Van Den Berg, David; Stram, Daniel O; Teo, Soo Hwang; Yip, Cheng Har; Kang, Peter; Ikram, Mohammad Kamran; Shu, Xiao-Ou; Lu, Wei; Gao, Yu-Tang; Cai, Hui; Kang, Daehee; Choi, Ji-Yeob; Park, Sue K; Noh, Dong-Young; Hartman, Mikael; Miao, Hui; Lim, Wei Yen; Lee, Soo Chin; Sangrajrang, Suleeporn; Gaborieau, Valerie; Brennan, Paul; Mckay, James; Wu, Pei-Ei; Hou, Ming-Feng; Yu, Jyh-Cherng; Shen, Chen-Yang; Blot, William; Cai, Qiuyin; Signorello, Lisa B; Luccarini, Craig; Bayes, Caroline; Ahmed, Shahana; Maranian, Mel; Healey, Catherine S; González-Neira, Anna; Pita, Guillermo; Alonso, M Rosario; Álvarez, Nuria; Herrero, Daniel; Tessier, Daniel C; Vincent, Daniel; Bacot, Francois; Hunter, David J; Lindstrom, Sara; Dennis, Joe; Michailidou, Kyriaki; Bolla, Manjeet K; Easton, Douglas F; dos Santos Silva, Isabel; Fletcher, Olivia; Peto, Julian

2015-05-15

We recently identified a novel susceptibility variant, rs865686, for estrogen-receptor positive breast cancer at 9q31.2. Here, we report a fine-mapping analysis of the 9q31.2 susceptibility locus using 43 160 cases and 42 600 controls of European ancestry ascertained from 52 studies and a further 5795 cases and 6624 controls of Asian ancestry from nine studies. Single nucleotide polymorphism (SNP) rs676256 was most strongly associated with risk in Europeans (odds ratios [OR] = 0.90 [0.88-0.92]; P-value = 1.58 × 10(-25)). This SNP is one of a cluster of highly correlated variants, including rs865686, that spans ∼14.5 kb. We identified two additional independent association signals demarcated by SNPs rs10816625 (OR = 1.12 [1.08-1.17]; P-value = 7.89 × 10(-09)) and rs13294895 (OR = 1.09 [1.06-1.12]; P-value = 2.97 × 10(-11)). SNP rs10816625, but not rs13294895, was also associated with risk of breast cancer in Asian individuals (OR = 1.12 [1.06-1.18]; P-value = 2.77 × 10(-05)). Functional genomic annotation using data derived from breast cancer cell-line models indicates that these SNPs localise to putative enhancer elements that bind known drivers of hormone-dependent breast cancer, including ER-α, FOXA1 and GATA-3. In vitro analyses indicate that rs10816625 and rs13294895 have allele-specific effects on enhancer activity and suggest chromatin interactions with the KLF4 gene locus. These results demonstrate the power of dense genotyping in large studies to identify independent susceptibility variants. Analysis of associations using subjects with different ancestry, combined with bioinformatic and genomic characterisation, can provide strong evidence for the likely causative alleles and their functional basis. © The Author 2015. Published by Oxford University Press.

Retail tobacco exposure: using geographic analysis to identify areas with excessively high retail density.

PubMed

Rodriguez, Daniel; Carlos, Heather A; Adachi-Mejia, Anna M; Berke, Ethan M; Sargent, James

2014-02-01

There is great disparity in tobacco outlet density (TOD), with density highest in low-income areas and areas with greater proportions of minority residents, and this disparity may affect cancer incidence. We sought to better understand the nature of this disparity by assessing how these socio-demographic factors relate to TOD at the national level. Using mixture regression analysis and all of the nearly 65,000 census tracts in the contiguous United States, we aimed to determine the number of latent disparity classes by modeling the relations of proportions of Blacks, Hispanics, and families living in poverty with TOD, controlling for urban/rural status. We identified six disparity classes. There was considerable heterogeneity in relation to TOD for Hispanics in rural settings. For Blacks, there was no relation to TOD in an urban moderate disparity class, and for rural census tracts, the relation was highest in a moderate disparity class. We demonstrated the utility of classifying census tracts on heterogeneity of tobacco risk exposure. This approach provides a better understanding of the complexity of socio-demographic influences of tobacco retailing and creates opportunities for policy makers to more efficiently target areas in greatest need.

Usefulness of Epicardial Area in the Short Axis to Identify Elevated Left Ventricular Mass in Men.

PubMed

Fitzpatrick, Jesse K; Cohen, Beth E; Rosenblatt, Andrew; Shaw, Richard E; Schiller, Nelson B

2018-06-15

Left ventricular (LV) hypertrophy is strongly associated with increased cardiovascular morbidity and mortality. The 2-dimensional LV mass algorithms suffer from measurement variability that can lead to misclassification of patients with LV hypertrophy as normal, or vice versa. Among the 4 echocardiographic measurements required by the 2-dimensional LV mass algorithms, epicardial and endocardial area have the lowest interobserver variation and could be used to corroborate LV mass calculations. We sought cut-off values that are able to discriminate between elevated and normal LV mass based on endocardial or epicardial area alone. Using data from 664 men enrolled in the Mind Your Heart Study, we calculated the correlation of LV mass index with epicardial area and endocardial area. We then used receiver operator characteristic curves to identify epicardial and endocardial area cut-points that could discriminate subjects with normal LV mass and LV hypertrophy. LV mass index was more strongly correlated with epicardial area compared with endocardial area, r = 0.70 versus r = 0.27, respectively. Epicardial area had a significantly higher area under the receiver operator characteristic curve (p <0.001) compared with endocardial area, 0.90 (95% confidence interval 0.86 to 0.93) versus 0.63 (95% confidence interval 0.57 to 0.71). An epicardial area cut-point of ≥38.0 cm 2 corresponded to a sensitivity of 95.0% and specificity of 54.4% for detecting LV hypertrophy. In conclusion, epicardial area showed promise as a method of rapid screening for LV hypertrophy and could be used to validate formal LV mass calculations. Copyright © 2018 Elsevier Inc. All rights reserved.

Homozygosity Mapping Identifies an Additional Locus for Wolfram Syndrome on Chromosome 4q

PubMed Central

El-Shanti, Hatem; Lidral, Andrew C.; Jarrah, Nadim; Druhan, Lawrence; Ajlouni, Kamel

2000-01-01

Wolfram syndrome, which is sometimes referred to as “DIDMOAD” (diabetes insipidus, diabetes mellitus, optic atrophy, and deafness), is an autosomal recessive neurodegenerative disorder for which only insulin-dependent diabetes mellitus and optic atrophy are necessary to make the diagnosis. Researchers have mapped Wolfram syndrome to chromosome 4p16.1, and, recently, a gene encoding a putative transmembrane protein has been cloned and mutations have been identified in patients. To pursue the possibility of locus heterogeneity, 16 patients from four different families were recruited. These patients, who have the Wolfram syndrome phenotype, also have additional features that have not previously been reported. There is an absence of diabetes insipidus in all affected family members. In addition, several patients have profound upper gastrointestinal ulceration and bleeding. With the use of three microsatellite markers (D4S432, D4S3023, and D4S2366) reported to be linked to the chromosome 4p16.1 locus, we significantly excluded linkage in three of the four families. The two affected individuals in one family showed homozygosity for all three markers from the region of linkage on chromosome 4p16.1. For the other three families, genetic heterogeneity for Wolfram syndrome was verified by demonstration of linkage to chromosome 4q22-24. In conclusion, we report the unique clinical findings and linkage-analysis results of 16 patients with Wolfram syndrome and provide further evidence for the genetic heterogeneity of this disorder. We also provide data on a new locus that plays a role in the etiology of insulin-dependent diabetes mellitus. PMID:10739754

Assessment and application of a snowblow modelling approach for identifying enhanced snow accumulation in areas of former glaciation

NASA Astrophysics Data System (ADS)

Mills, Stephanie; Smith, Michael; Le Brocq, Anne; Ardakova, Ekaterina; Hillier, John; Boston, Clare

2016-04-01

The redistribution of snow by wind can play an important role in providing additional mass to the surface of glaciers and can, therefore, have an impact on the glacier's surface mass balance. In areas of marginal glaciation, this local topo-climatic effect may be prove crucial for the initiation and survival of glaciers, whilst it can also increase heterogeneity in the distribution of snow on ice caps and ice sheets. We present a newly developed snowblow model which calculates spatial variations in relative snow accumulation that result from variations in topography. We apply this model to areas of former marginal glaciation in the Brecon Beacons, Wales and an area of former plateau icefield glaciation in the Monadhliath, Scotland. We can then determine whether redistribution by snow can help explain variations in the estimated equilibrium line altitudes (ELAs) of these former glaciers. Specifically, we compare the areas where snow is modelled as accumulating, to the reconstructed glacier surface, which is based on mapped moraines believed to be of Younger Dryas age. The model is applied to 30 m resolution DEMs and potential snow accumulation is simulated from different wind directions in order to determine the most likely contributing sector. Total snow accumulation in sub-set areas is then calculated and compared to the reconstructed glacier area. The results suggest that areas with larger amounts of snow accumulation often correspond with those where the ELA is lower than surrounding glaciers and vice versa, in both the marginal and icefield setting, suggesting that the role of snowblow in supplying additional mass to the surface of glaciers is significant.

Use of Parsimony Analysis to Identify Areas of Endemism of Chinese Birds: Implications for Conservation and Biogeography

PubMed Central

Huang, Xiao-Lei; Qiao, Ge-Xia; Lei, Fu-Min

2010-01-01

Parsimony analysis of endemicity (PAE) was used to identify areas of endemism (AOEs) for Chinese birds at the subregional level. Four AOEs were identified based on a distribution database of 105 endemic species and using 18 avifaunal subregions as the operating geographical units (OGUs). The four AOEs are the Qinghai-Zangnan Subregion, the Southwest Mountainous Subregion, the Hainan Subregion and the Taiwan Subregion. Cladistic analysis of subregions generally supports the division of China’s avifauna into Palaearctic and Oriental realms. Two PAE area trees were produced from two different distribution datasets (year 1976 and 2007). The 1976 topology has four distinct subregional branches; however, the 2007 topology has three distinct branches. Moreover, three Palaearctic subregions in the 1976 tree clustered together with the Oriental subregions in the 2007 tree. Such topological differences may reflect changes in the distribution of bird species through circa three decades. PMID:20559504

Land use/cover changes in European mountain areas: identifying links between global driving forces and local consequences

NASA Astrophysics Data System (ADS)

Malek, Žiga; Schröter, Dagmar; Glade, Thomas

2013-04-01

Minor land use/cover changes in mountain areas can aggravate the consequences of hydro-meteorological hazards such as landslides, avalanches, rockfall and flash floods. What is more, they change the provisioning of ecosystem services; also as their recovery after anthropogenic induced changes in mountains are slower or not occurring at all due to harsh climate and soil conditions. Examples of these changes are urbanization in high risk areas or deforestation on slopes. To understand the driving forces behind land use/cover changes in European mountain areas, the focus is on the two case study areas: The Val Canale valley in the Italian Alps and the Buzau valley in the Romanian Carpathians. Land use/cover changes were analyzed in the recent decades applying various remote sensing techniques, such as satellite imagery classification and visual interpretation, as well as integration of various databases (e.g. forestry, spatial planning and cadaster plans). Instead of identifying the statistical significance of particular variables (e.g. population change), the links between different driving forces of global change (e.g. political and policy changes, infrastructural plans) and local socio-economic variables were investigated further through interviewing local and regional stakeholders. The results show how both areas differ in the consequences of global changes in terms of land use/cover change. The Italian area witnessed a trajectory from a commercially active and competitive area, to an area with a large portion of abandoned commercial, customs, industrial and mining zones. These processes were accompanied by the expansion of settlements comprised mostly of secondary housing on areas with high risk, resulting in catastrophic consequences in recent flash floods and debris flows events. The Romanian site also witnessed a breakdown of local commercial and industrial activities. Together with land ownership reforms, this has resulted in the emergence of subsistence

Identifying desertification risk areas using fuzzy membership and geospatial technique - A case study, Kota District, Rajasthan

NASA Astrophysics Data System (ADS)

Dasgupta, Arunima; Sastry, K. L. N.; Dhinwa, P. S.; Rathore, V. S.; Nathawat, M. S.

2013-08-01

Desertification risk assessment is important in order to take proper measures for its prevention. Present research intends to identify the areas under risk of desertification along with their severity in terms of degradation in natural parameters. An integrated model with fuzzy membership analysis, fuzzy rule-based inference system and geospatial techniques was adopted, including five specific natural parameters namely slope, soil pH, soil depth, soil texture and NDVI. Individual parameters were classified according to their deviation from mean. Membership of each individual values to be in a certain class was derived using the normal probability density function of that class. Thus if a single class of a single parameter is with mean μ and standard deviation σ, the values falling beyond μ + 2 σ and μ - 2 σ are not representing that class, but a transitional zone between two subsequent classes. These are the most important areas in terms of degradation, as they have the lowest probability to be in a certain class, hence highest probability to be extended or narrowed down in next or previous class respectively. Eventually, these are the values which can be easily altered, under extrogenic influences, hence are identified as risk areas. The overall desertification risk is derived by incorporating the different risk severity of each parameter using fuzzy rule-based interference system in GIS environment. Multicriteria based geo-statistics are applied to locate the areas under different severity of desertification risk. The study revealed that in Kota, various anthropogenic pressures are accelerating land deterioration, coupled with natural erosive forces. Four major sources of desertification in Kota are, namely Gully and Ravine erosion, inappropriate mining practices, growing urbanization and random deforestation.

The availability of hydrogeologic data associated with areas identified by the US Geological Survey as experiencing potentially induced seismicity resulting from subsurface injection

NASA Astrophysics Data System (ADS)

Barnes, Caitlin; Halihan, Todd

2018-05-01

A critical need exists for site-specific hydrogeologic data in order to determine potential hazards of induced seismicity and to manage risk. By 2015, the United States Geological Survey (USGS) had identified 17 locations in the USA that are experiencing an increase in seismicity, which may be potentially induced through industrial subsurface injection. These locations span across seven states, which vary in geological setting, industrial exposure and seismic history. Comparing the research across the 17 locations revealed patterns for addressing induced seismicity concerns, despite the differences between geographical locations. Most induced seismicity studies evaluate geologic structure and seismic data from areas experiencing changes in seismic activity levels, but the inherent triggering mechanism is the transmission of hydraulic pressure pulses. This research conducted a systematic review of whether data are available in these locations to generate accurate hydrogeologic predictions, which could aid in managing seismicity. After analyzing peer-reviewed research within the 17 locations, this research confirms a lack of site-specific hydrogeologic data availability for at-risk areas. Commonly, formation geology data are available for these sites, but hydraulic parameters for the seismically active injection and basement zones are not available to researchers conducting peer-reviewed research. Obtaining hydrogeologic data would lead to better risk management for injection areas and provide additional scientific evidential support for determining a potentially induced seismic area.

Identifying threats, values, and attributes in Brazilian wilderness areas

Treesearch

Teresa Cristina Magro; Alan Watson; Paula Bernasconi

2007-01-01

The protection of relatively pristine areas in Brazil provides a great opportunity to recognize the values of natural ecosystems. At the same time, it provides opportunities for economic development. The growing interest in these areas in Brazil has stimulated techniques for management and research to study the consequences of human activities on the natural...

Identifying high-risk areas of bacillary dysentery and associated meteorological factors in Wuhan, China.

PubMed

Li, Zhenjun; Wang, Ligui; Sun, Weige; Hou, Xuexin; Yang, Haiyan; Sun, Lina; Xu, Shuai; Sun, Qiangzheng; Zhang, Jingshan; Song, Hongbin; Lin, Hualiang

2013-11-21

Spatial distribution of bacillary dysentery incidence was mapped at the district level in Wuhan, China. And a generalized additive time series model was used to examine the effect of daily weather factors on bacillary dysentery in the high-risk areas, after controlling for potential confounding factors. Central districts were found to be the high-risk areas. The time series analysis found an acute effect of meteorological factors on bacillary dysentery occurrence. A positive association was found for mean temperature (excess risk (ER) for 1°C increase being 0.94% (95% confidence interval (CI): 0.46% to 1.43% on the lag day 2), while a negative effect was observed for relative humidity and rainfall, the ER for 1% increase in relative humidity was -0.21% (95% CI: -0.34% to -0.08%), and the ER for 1 mm increase in rainfall was -0.23% (95% CI: -0.37% to -0.09%). This study suggests that bacillary dysentery prevention and control strategy should consider local weather variations.

Elective surgical case cancellation in the Veterans Health Administration system: identifying areas for improvement.

PubMed

Argo, Joshua L; Vick, Catherine C; Graham, Laura A; Itani, Kamal M F; Bishop, Michael J; Hawn, Mary T

2009-11-01

This study evaluated elective surgical case cancellation (CC) rates, reasons for these cancellations, and identified areas for improvement within the Veterans Health Administration (VA) system. CC data for 2006 were collected from the scheduling software for 123 VA facilities. Surveys were distributed to 40 facilities (10 highest and 10 lowest CC rates for high- and low-volume facilities). CC reasons were standardized and piloted at 5 facilities. Of 329,784 cases scheduled by 9 surgical specialties, 40,988 (12.4%) were cancelled. CC reasons (9,528) were placed into 6 broad categories: patient (35%), work-up/medical condition change (28%), facility (20%), surgeon (8%), anesthesia (1%), and miscellaneous (8%). Survey results show areas for improvement at the facility level and a standardized list of 28 CC reasons was comprehensive. Interventions that decrease cancellations caused by patient factors, inadequate work-up, and facility factors are needed to reduce overall elective surgical case cancellations.

Identifying Priority Areas for Conservation: A Global Assessment for Forest-Dependent Birds

PubMed Central

Buchanan, Graeme M.; Donald, Paul F.; Butchart, Stuart H. M.

2011-01-01

Limited resources are available to address the world's growing environmental problems, requiring conservationists to identify priority sites for action. Using new distribution maps for all of the world's forest-dependent birds (60.6% of all bird species), we quantify the contribution of remaining forest to conserving global avian biodiversity. For each of the world's partly or wholly forested 5-km cells, we estimated an impact score of its contribution to the distribution of all the forest bird species estimated to occur within it, and so is proportional to the impact on the conservation status of the world's forest-dependent birds were the forest it contains lost. The distribution of scores was highly skewed, a very small proportion of cells having scores several orders of magnitude above the global mean. Ecoregions containing the highest values of this score included relatively species-poor islands such as Hawaii and Palau, the relatively species-rich islands of Indonesia and the Philippines, and the megadiverse Atlantic Forests and northern Andes of South America. Ecoregions with high impact scores and high deforestation rates (2000–2005) included montane forests in Cameroon and the Eastern Arc of Tanzania, although deforestation data were not available for all ecoregions. Ecoregions with high impact scores, high rates of recent deforestation and low coverage by the protected area network included Indonesia's Seram rain forests and the moist forests of Trinidad and Tobago. Key sites in these ecoregions represent some of the most urgent priorities for expansion of the global protected areas network to meet Convention on Biological Diversity targets to increase the proportion of land formally protected to 17% by 2020. Areas with high impact scores, rapid deforestation, low protection and high carbon storage values may represent significant opportunities for both biodiversity conservation and climate change mitigation, for example through Reducing Emissions from

Identifying areas under potential risk of illegal construction and demolition waste dumping using GIS tools.

PubMed

Seror, Nissim; Portnov, Boris A

2018-05-01

Construction and demolition (C&D) waste, dumped illegally in ravines and open areas, contaminates soil and can cause underground water pollution and forests fires. Yet, effective monitoring of illegal C&D waste dumping and enforcing legislation against the offenders are often a difficult task due to the large size of geographic areas that need to be monitored, and limited human and financial resources available to environmental law enforcement agencies. In this study, we use Geographic Information System (GIS) tools and geo-statistical modelling to identify the areas under potentially elevated risk of illegal C&D waste dumping in the Haifa district of Israel. As our analysis shows, locational factors, significantly associated with the accumulated amount of waste in the existing illegal C&D waste sites, include: distance to the nearest main road, depth of the ravine present at the site (p<0.01), and forest proximity (p<0.05). Using the model incorporating these locational parameters, we mapped the areas under the elevated risk of illegal C&D waste dumping for future monitoring. As we suggest, the proposed approach may be useful for environmental law enforcement authorities, by helping them to focus on specific sites for inspection, save resources, and act against the offenders more efficiently. Copyright © 2018 Elsevier Ltd. All rights reserved.

Retail Tobacco Exposure: Using Geographic Analysis to Identify Areas With Excessively High Retail Density

PubMed Central

2014-01-01

Introduction: There is great disparity in tobacco outlet density (TOD), with density highest in low-income areas and areas with greater proportions of minority residents, and this disparity may affect cancer incidence. We sought to better understand the nature of this disparity by assessing how these socio-demographic factors relate to TOD at the national level. Methods: Using mixture regression analysis and all of the nearly 65,000 census tracts in the contiguous United States, we aimed to determine the number of latent disparity classes by modeling the relations of proportions of Blacks, Hispanics, and families living in poverty with TOD, controlling for urban/rural status. Results: We identified six disparity classes. There was considerable heterogeneity in relation to TOD for Hispanics in rural settings. For Blacks, there was no relation to TOD in an urban moderate disparity class, and for rural census tracts, the relation was highest in a moderate disparity class. Conclusions: We demonstrated the utility of classifying census tracts on heterogeneity of tobacco risk exposure. This approach provides a better understanding of the complexity of socio-demographic influences of tobacco retailing and creates opportunities for policy makers to more efficiently target areas in greatest need. PMID:23999651

Identifying Areas of Tension in the Field of Technology-Enhanced Learning: Results of an International Delphi Study

ERIC Educational Resources Information Center

Plesch, Christine; Kaendler, Celia; Rummel, Nikol; Wiedmann, Michael; Spada, Hans

2013-01-01

Despite steady progress in research in technology-enhanced learning (TEL), the translation of research findings and technology into educational practices falls short of expectations. We present five Areas of Tension which were identified and evaluated in an international Delphi study on TEL. These tensions might impede a more comprehensive…

Identifying core habitat and connectivity for focal species in the interior cedar-hemlock forest of North America to complete a conservation area design

Treesearch

Lance Craighead; Baden Cross

2007-01-01

To identify the remaining areas of the Interior Cedar- Hemlock Forest of North America and prioritize them for conservation planning, the Craighead Environmental Research Institute has developed a 2-scale method for mapping critical habitat utilizing 1) a broad-scale model to identify important regional locations as the basis for a Conservation Area Design (CAD), and 2...

Identifying Factors for Worker Motivation in Zambia's Rural Health Facilities.

PubMed

Cross, Samuel S; Baernholdt, Dr Marianne

2017-01-01

Within Zambia there is a shortage of health workers in rural areas. This study aims to identify motivating factors for retaining rural health workers. Sixty rural health workers completed surveys and 46 were interviewed. They rated the importance of six motivating factors and discussed these and other factors in interviews. An interview was conducted with a Government Human Resources Manager (HR Manager) to elicit contextual information. All six factors were identified as being very important motivators, as were two additional factors. Additional career training was identified by many as the most important factor. Comparison of results and the HR Manager interview revealed that workers lacked knowledge about opportunities and that the HR manager was aware of barriers to career development. The Zambian government might better motivate and retain rural health workers by offering them any combination of identified factors, and by addressing the barriers to career development.

Prescription opioid poisoning across urban and rural areas: identifying vulnerable groups and geographic areas.

PubMed

Cerdá, Magdalena; Gaidus, Andrew; Keyes, Katherine M; Ponicki, William; Martins, Silvia; Galea, Sandro; Gruenewald, Paul

2017-01-01

To determine (1) whether prescription opioid poisoning (PO) hospital discharges spread across space over time, (2) the locations of 'hot-spots' of PO-related hospital discharges, (3) how features of the local environment contribute to the growth in PO-related hospital discharges and (4) where each environmental feature makes the strongest contribution. Hierarchical Bayesian Poisson space-time analysis to relate annual discharges from community hospitals to postal code characteristics over 10 years. California, USA. Residents of 18 517 postal codes in California, 2001-11. Annual postal code-level counts of hospital discharges due to PO poisoning were related to postal code pharmacy density, measures of medical need for POs (i.e. rates of cancer and arthritis-related hospital discharges), economic stressors (i.e. median household income, percentage of families in poverty and the unemployment rate) and concentration of manual labor industries. PO-related hospital discharges spread from rural and suburban/exurban 'hot-spots' to urban areas. They increased more in postal codes with greater pharmacy density [rate ratio (RR) = 1.03; 95% credible interval (CI) = 1.01, 1.05], more arthritis-related hospital discharges (RR = 1.08; 95% CI = 1.06, 1.11), lower income (RR = 0.85; 95% CI = 0.83, 0.87) and more manual labor industries (RR = 1.15; 95% CI = 1.10, 1.19 for construction; RR = 1.12; 95% CI = 1.04, 1.20 for manufacturing industries). Changes in pharmacy density primarily affected PO-related discharges in urban areas, while changes in income and manual labor industries especially affected PO-related discharges in suburban/exurban and rural areas. Hospital discharge rates for prescription opioid (PO) poisoning spread from rural and suburban/exurban hot-spots to urban areas, suggesting spatial contagion. The distribution of age-related and work-place-related sources of medical need for POs in rural areas and, to a lesser extent, the availability of

Mineral resource potential map of the Sugarloaf Roadless Area, San Bernardino County, California

USGS Publications Warehouse

Powell, Robert E.; Matti, Jonathan C.; Cox, Brett F.; Oliver, Howard W.; Wagini, Alexander; Campbell, Harry W.

1983-01-01

Geologic, geochemical, and geophysical investigations and a survey of mines and prospects indicate that the Sugaloaf Roadless Area contains subeconomic graphite and magnesian marble resources. Parts of the area have a low potential for the occurrence of additional low-grade graphite resources, but there is no potential for additional magnesian marble resources within the roadless area. Sand, gravel, and construction stone other than carbonate rocks are found in the roadless area, but similar or better quality materials are abundant and more accessible outside the area. The roadless area has no identified energy mineral resources, but parts of the area have a low to moderate potential for low-grade uranium resources. There are no identified metallic mineral resources within the area, and there is no evidence of a potential for the occurrence of such resources. No previously unknown mineral occurrence was located during this study.

Identifying spatially integrated floodplains/riparian areas and wetlands

EPA Science Inventory

Floodplain delineation may play an important role in managing wetlands and riparian areas at multiple scales - local, state, and federal. This poster demonstrates multiple GIS-based approaches to delimiting floodplains and contrasts these with observed flooding events from a majo...

Identifying different learning styles to enhance the learning experience.

PubMed

Anderson, Irene

2016-10-12

Identifying your preferred learning style can be a useful way to optimise learning opportunities, and can help learners to recognise their strengths and areas for development in the way that learning takes place. It can also help teachers (educators) to recognise where additional activities are required to ensure the learning experience is robust and effective. There are several models available that may be used to identify learning styles. This article discusses these models and considers their usefulness in healthcare education. Models of teaching styles are also considered.

76 FR 6119 - Nomination of Existing Marine Protected Areas to the National System of Marine Protected Areas...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-03

... that may be established by managing agencies to fill key conservation gaps in important ocean areas... systems, systematic monitoring and evaluation, targeted outreach to key user groups, and helping to identify and address MPA research needs). In addition, the national system provides a forum for coordinated...

Source Distribution Method for Unsteady One-Dimensional Flows With Small Mass, Momentum, and Heat Addition and Small Area Variation

NASA Technical Reports Server (NTRS)

Mirels, Harold

1959-01-01

A source distribution method is presented for obtaining flow perturbations due to small unsteady area variations, mass, momentum, and heat additions in a basic uniform (or piecewise uniform) one-dimensional flow. First, the perturbations due to an elemental area variation, mass, momentum, and heat addition are found. The general solution is then represented by a spatial and temporal distribution of these elemental (source) solutions. Emphasis is placed on discussing the physical nature of the flow phenomena. The method is illustrated by several examples. These include the determination of perturbations in basic flows consisting of (1) a shock propagating through a nonuniform tube, (2) a constant-velocity piston driving a shock, (3) ideal shock-tube flows, and (4) deflagrations initiated at a closed end. The method is particularly applicable for finding the perturbations due to relatively thin wall boundary layers.

Wind and wildlife in the Northern Great Plains: identifying low-impact areas for wind development.

PubMed

Fargione, Joseph; Kiesecker, Joseph; Slaats, M Jan; Olimb, Sarah

2012-01-01

Wind energy offers the potential to reduce carbon emissions while increasing energy independence and bolstering economic development. However, wind energy has a larger land footprint per Gigawatt (GW) than most other forms of energy production and has known and predicted adverse effects on wildlife. The Northern Great Plains (NGP) is home both to some of the world's best wind resources and to remaining temperate grasslands, the most converted and least protected ecological system on the planet. Thus, appropriate siting and mitigation of wind development is particularly important in this region. Steering energy development to disturbed lands with low wildlife value rather than placing new developments within large and intact habitats would reduce impacts to wildlife. Goals for wind energy development in the NGP are roughly 30 GW of nameplate capacity by 2030. Our analyses demonstrate that there are large areas where wind development would likely have few additional impacts on wildlife. We estimate there are ∼1,056 GW of potential wind energy available across the NGP on areas likely to have low-impact for biodiversity, over 35 times development goals. New policies and approaches will be required to guide wind energy development to low-impact areas.

Identifying high-risk areas of bacillary dysentery and associated meteorological factors in Wuhan, China

PubMed Central

Li, Zhenjun; Wang, Ligui; Sun, Weige; Hou, Xuexin; Yang, Haiyan; Sun, Lina; Xu, Shuai; Sun, Qiangzheng; Zhang, Jingshan; Song, Hongbin; Lin, Hualiang

2013-01-01

Spatial distribution of bacillary dysentery incidence was mapped at the district level in Wuhan, China. And a generalized additive time series model was used to examine the effect of daily weather factors on bacillary dysentery in the high-risk areas, after controlling for potential confounding factors. Central districts were found to be the high-risk areas. The time series analysis found an acute effect of meteorological factors on bacillary dysentery occurrence. A positive association was found for mean temperature (excess risk (ER) for 1°C increase being 0.94% (95% confidence interval (CI): 0.46% to 1.43% on the lag day 2), while a negative effect was observed for relative humidity and rainfall, the ER for 1% increase in relative humidity was −0.21% (95% CI: −0.34% to −0.08%), and the ER for 1 mm increase in rainfall was −0.23% (95% CI: −0.37% to −0.09%). This study suggests that bacillary dysentery prevention and control strategy should consider local weather variations. PMID:24257434

Using generalized additive modeling to empirically identify thresholds within the ITERS in relation to toddlers' cognitive development.

PubMed

Setodji, Claude Messan; Le, Vi-Nhuan; Schaack, Diana

2013-04-01

Research linking high-quality child care programs and children's cognitive development has contributed to the growing popularity of child care quality benchmarking efforts such as quality rating and improvement systems (QRIS). Consequently, there has been an increased interest in and a need for approaches to identifying thresholds, or cutpoints, in the child care quality measures used in these benchmarking efforts that differentiate between different levels of children's cognitive functioning. To date, research has provided little guidance to policymakers as to where these thresholds should be set. Using the Early Childhood Longitudinal Study, Birth Cohort (ECLS-B) data set, this study explores the use of generalized additive modeling (GAM) as a method of identifying thresholds on the Infant/Toddler Environment Rating Scale (ITERS) in relation to toddlers' performance on the Mental Development subscale of the Bayley Scales of Infant Development (the Bayley Mental Development Scale Short Form-Research Edition, or BMDSF-R). The present findings suggest that simple linear models do not always correctly depict the relationships between ITERS scores and BMDSF-R scores and that GAM-derived thresholds were more effective at differentiating among children's performance levels on the BMDSF-R. Additionally, the present findings suggest that there is a minimum threshold on the ITERS that must be exceeded before significant improvements in children's cognitive development can be expected. There may also be a ceiling threshold on the ITERS, such that beyond a certain level, only marginal increases in children's BMDSF-R scores are observed. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

Using EnviroAtlas to Identify Locations for Urban Heat Island Abatement

EPA Science Inventory

For the metropolitan region of Portland, Oregon, this use case demonstrates how city planners could use EnviroAtlas data with a map of the UHI to identify areas that might benefit from heat mitigation through additional street trees. Street trees are one option, and other solutio...

Additions to the Flora of Cleveland County, Arkansas: Collections From Moro Bottoms Natural Area, A State-Protected Old-Growth Bottomland Hardwood Forest

Treesearch

Danny Skojac; Margaret S. Devall; Bernard R. Parresol

2003-01-01

An annotated list of 38 additions to the vascular flora of Cleveland County, Arkansas is presented. The additions presented were collected from Moro Bottoms Natural Area, a state-protected old-growth bottomland hardwood forest located in the northwest region of the county.

Identifying sensitive areas of adaptive observations for prediction of the Kuroshio large meander using a shallow-water model

NASA Astrophysics Data System (ADS)

Zou, Guang'an; Wang, Qiang; Mu, Mu

2016-09-01

Sensitive areas for prediction of the Kuroshio large meander using a 1.5-layer, shallow-water ocean model were investigated using the conditional nonlinear optimal perturbation (CNOP) and first singular vector (FSV) methods. A series of sensitivity experiments were designed to test the sensitivity of sensitive areas within the numerical model. The following results were obtained: (1) the eff ect of initial CNOP and FSV patterns in their sensitive areas is greater than that of the same patterns in randomly selected areas, with the eff ect of the initial CNOP patterns in CNOP sensitive areas being the greatest; (2) both CNOP- and FSV-type initial errors grow more quickly than random errors; (3) the eff ect of random errors superimposed on the sensitive areas is greater than that of random errors introduced into randomly selected areas, and initial errors in the CNOP sensitive areas have greater eff ects on final forecasts. These results reveal that the sensitive areas determined using the CNOP are more sensitive than those of FSV and other randomly selected areas. In addition, ideal hindcasting experiments were conducted to examine the validity of the sensitive areas. The results indicate that reduction (or elimination) of CNOP-type errors in CNOP sensitive areas at the initial time has a greater forecast benefit than the reduction (or elimination) of FSV-type errors in FSV sensitive areas. These results suggest that the CNOP method is suitable for determining sensitive areas in the prediction of the Kuroshio large-meander path.

Nominal group technique: a brainstorming tool for identifying areas to improve pain management in hospitalized patients.

PubMed

Peña, Adolfo; Estrada, Carlos A; Soniat, Debbie; Taylor, Benjamin; Burton, Michael

2012-01-01

Pain management in hospitalized patients remains a priority area for improvement; effective strategies for consensus development are needed to prioritize interventions. To identify challenges, barriers, and perspectives of healthcare providers in managing pain among hospitalized patients. Qualitative and quantitative group consensus using a brainstorming technique for quality improvement-the nominal group technique (NGT). One medical, 1 medical-surgical, and 1 surgical hospital unit at a large academic medical center. Nurses, resident physicians, patient care technicians, and unit clerks. Responses and ranking to the NGT question: "What causes uncontrolled pain in your unit?" Twenty-seven health workers generated a total of 94 ideas. The ideas perceived contributing to a suboptimal pain control were grouped as system factors (timeliness, n = 18 ideas; communication, n = 11; pain assessment, n = 8), human factors (knowledge and experience, n = 16; provider bias, n = 8; patient factors, n = 19), and interface of system and human factors (standardization, n = 14). Knowledge, timeliness, provider bias, and patient factors were the top ranked themes. Knowledge and timeliness are considered main priorities to improve pain control. NGT is an efficient tool for identifying general and context-specific priority areas for quality improvement; teams of healthcare providers should consider using NGT to address their own challenges and barriers. Copyright © 2011 Society of Hospital Medicine.

Using geographic information systems to identify prospective marketing areas for a special library.

PubMed

McConnaughy, Rozalynd P; Wilson, Steven P

2006-05-04

The Center for Disability Resources (CDR) Library is the largest collection of its kind in the Southeastern United States, consisting of over 5,200 books, videos/DVDs, brochures, and audiotapes covering a variety of disability-related topics, from autism to transition resources. The purpose of the library is to support the information needs of families, faculty, students, staff, and other professionals in South Carolina working with individuals with disabilities. The CDR Library is funded on a yearly basis; therefore, maintaining high usage is crucial. A variety of promotional efforts have been used to attract new patrons to the library. Anyone in South Carolina can check out materials from the library, and most of the patrons use the library remotely by requesting materials, which are then mailed to them. The goal of this project was to identify areas of low geographic usage as a means of identifying locations for future library marketing efforts. Nearly four years worth of library statistics were compiled in a spreadsheet that provided information per county on the number of checkouts, the number of renewals, and the population. Five maps were created using ArcView GIS software to create visual representations of patron checkout and renewal behavior per county. Out of the 46 counties in South Carolina, eight counties never checked out materials from the library. As expected urban areas and counties near the library's physical location have high usage totals. The visual representation of the data made identification of low usage regions easier than using a standalone database with no visual-spatial component. The low usage counties will be the focus of future Center for Disability Resources Library marketing efforts. Due to the impressive visual-spatial representations created with Geographic Information Systems, which more efficiently communicate information than stand-alone database information can, librarians may benefit from the software's use as a

Differential activation of an identified motor neuron and neuromodulation provide Aplysia's retractor muscle an additional function.

PubMed

McManus, Jeffrey M; Lu, Hui; Cullins, Miranda J; Chiel, Hillel J

2014-08-15

To survive, animals must use the same peripheral structures to perform a variety of tasks. How does a nervous system employ one muscle to perform multiple functions? We addressed this question through work on the I3 jaw muscle of the marine mollusk Aplysia californica's feeding system. This muscle mediates retraction of Aplysia's food grasper in multiple feeding responses and is innervated by a pool of identified neurons that activate different muscle regions. One I3 motor neuron, B38, is active in the protraction phase, rather than the retraction phase, suggesting the muscle has an additional function. We used intracellular, extracellular, and muscle force recordings in several in vitro preparations as well as recordings of nerve and muscle activity from intact, behaving animals to characterize B38's activation of the muscle and its activity in different behavior types. We show that B38 specifically activates the anterior region of I3 and is specifically recruited during one behavior, swallowing. The function of this protraction-phase jaw muscle contraction is to hold food; thus the I3 muscle has an additional function beyond mediating retraction. We additionally show that B38's typical activity during in vivo swallowing is insufficient to generate force in an unmodulated muscle and that intrinsic and extrinsic modulation shift the force-frequency relationship to allow contraction. Using methods that traverse levels from individual neuron to muscle to intact animal, we show how regional muscle activation, differential motor neuron recruitment, and neuromodulation are key components in Aplysia's generation of multifunctionality. Copyright © 2014 the American Physiological Society.

Wind and Wildlife in the Northern Great Plains: Identifying Low-Impact Areas for Wind Development

PubMed Central

Fargione, Joseph; Kiesecker, Joseph; Slaats, M. Jan; Olimb, Sarah

2012-01-01

Wind energy offers the potential to reduce carbon emissions while increasing energy independence and bolstering economic development. However, wind energy has a larger land footprint per Gigawatt (GW) than most other forms of energy production and has known and predicted adverse effects on wildlife. The Northern Great Plains (NGP) is home both to some of the world’s best wind resources and to remaining temperate grasslands, the most converted and least protected ecological system on the planet. Thus, appropriate siting and mitigation of wind development is particularly important in this region. Steering energy development to disturbed lands with low wildlife value rather than placing new developments within large and intact habitats would reduce impacts to wildlife. Goals for wind energy development in the NGP are roughly 30 GW of nameplate capacity by 2030. Our analyses demonstrate that there are large areas where wind development would likely have few additional impacts on wildlife. We estimate there are ∼1,056 GW of potential wind energy available across the NGP on areas likely to have low-impact for biodiversity, over 35 times development goals. New policies and approaches will be required to guide wind energy development to low-impact areas. PMID:22848505

47 CFR 5.311 - Additional requirements related to safety of the public.

Code of Federal Regulations, 2014 CFR

2014-10-01

... safety of the public. In addition to the notification requirements of § 5.309, for experiments that may... bands and geographic area as the planned experiment and, as appropriate, their end users; (b) Rapid identification, and elimination, of any harm the experiment may cause; and (c) Identifying an alternate means for...

47 CFR 5.311 - Additional requirements related to safety of the public.

Code of Federal Regulations, 2013 CFR

2013-10-01

... safety of the public. In addition to the notification requirements of § 5.309, for experiments that may... bands and geographic area as the planned experiment and, as appropriate, their end users; (b) Rapid identification, and elimination, of any harm the experiment may cause; and (c) Identifying an alternate means for...

CHEAT MOUNTAIN ROADLESS AREA, WEST VIRGINIA.

USGS Publications Warehouse

Englund, K.J.; Behum, P.T.

1984-01-01

A mineral-resource survey determined that coal is the most important mineral resource in the Cheat Mountain Roadless Area, West Virginia. It is tentatively ranked as high-volatile A to medium-volatile bituminous similar to coal in nearby mining areas, and is primarily of coking quality. Demonstrated coal resources are estimated to total about 11. 6 million short tons in beds more than 28 in. thick in areas of substantiated resource potential and an additional 32. 7 million short tons in beds between 14 and 28 in. thick have been identified. Limestone, shale, clay, and sandstone occur in the area but these commodities are readily available outside the roadless area. Available information suggests little promise for the occurrence of metallic mineral or other energy resources in the area.

Identifying areas with vitamin A deficiency: the validity of a semiquantitative food frequency method.

PubMed

Sloan, N L; Rosen, D; de la Paz, T; Arita, M; Temalilwa, C; Solomons, N W

1997-02-01

The prevalence of vitamin A deficiency has traditionally been assessed through xerophthalmia or biochemical surveys. The cost and complexity of implementing these methods limits the ability of nonresearch organizations to identify vitamin A deficiency. This study examined the validity of a simple, inexpensive food frequency method to identify areas with a high prevalence of vitamin A deficiency. The validity of the method was tested in 15 communities, 5 each from the Philippines, Guatemala, and Tanzania. Serum retinol concentrations of less than 20 micrograms/dL defined vitamin A deficiency. Weighted measures of vitamin A intake six or fewer times per week and unweighted measures of consumption of animal sources of vitamin A four or fewer times per week correctly classified seven of eight communities as having a high prevalence of vitamin A deficiency (i.e., 15% or more preschool-aged children in the community had the deficiency) (sensitivity = 87.5%) and four of seven communities as having a low prevalence (specificity = 57.1%). This method correctly classified the vitamin A deficiency status of 73.3% of the communities but demonstrated a high false-positive rate (42.9%).

North Carolina Toxic Substance Incidents Program 2010-2015: Identifying Areas for Injury Prevention Efforts.

PubMed

Eiffert, Samantha; Etienne, Suze; Hirsch, Annie; Langley, Ricky

2017-08-06

The National Toxic Substance Incidents Program (NTSIP) is a surveillance system designed to capture acute toxic substance releases, factors contributing to the release, and any associated injuries. North Carolina has participated since 2010, when NTSIP was established. This article will present a descriptive statistical summary from 2010 to 2015 focused on releases that resulted in injuries in order to identify areas for public health prevention efforts. Of the 1690 toxic releases in North Carolina, 155 incidents resulted in injuries and 500 people were injured. Carbon monoxide injured the greatest number of people. Of the incidents that resulted in injuries, 68 occurred at private vehicles or residences (44%), injuring 124 people (25%). Over half of events where at least one responder was injured occurred at private vehicles or residences. Events occurring at private residences did not have a significant relationship between evacuations and injuries, while for industry-related events, the odds of an evacuation being ordered were 8.18 times greater (OR = 8.18, 95% CI = 5.19, 12.89) when there were injuries associated with an event. Intervention efforts should focus on preventing responder injuries while responding to private residence releases and educating the general public on how to prevent injuries by self-evacuating areas where hazardous chemicals have been released.

A Pilot Project to Identify Sex Role Factors Affecting the Employment of Vocational Students in Selected Occupational Areas. Final Report, February 1, 1980-June 30, 1980.

ERIC Educational Resources Information Center

Wichowski, Chester P.; DuMond, Doreen C.

A pilot study was conducted to identify sex role factors which could affect the search for employment and the adjustment to employment for vocational graduates in selected occupational areas. Target employment areas were identified through a review of occupations with a disproportionate composition by one sex or the other. These included…

Soil respiration characteristics in different land uses and response of soil organic carbon to biochar addition in high-latitude agricultural area.

PubMed

Ouyang, Wei; Geng, Xiaojun; Huang, Wejia; Hao, Fanghua; Zhao, Jinbo

2016-02-01

The farmland tillage practices changed the soil chemical properties, which also impacted the soil respiration (R s ) process and the soil carbon conservation. Originally, the farmland in northeast China had high soil carbon content, which was decreased in the recent decades due to the tillage practices. To better understand the R s dynamics in different land use types and its relationship with soil carbon loss, soil samples at two layers (0-15 and 15-30 cm) were analyzed for organic carbon (OC), total nitrogen (TN), total phosphorus (TP), total carbon (TC), available nitrogen (AN), available phosphorus (AP), soil particle size distribution, as well as the R s rate. The R s rate of the paddy land was 0.22 (at 0-15 cm) and 3.01 (at 15-30 cm) times of the upland. The average concentrations of OC and clay content in cultivated areas were much lower than in non-cultivated areas. The partial least squares analysis suggested that the TC and TN were significantly related to the R s process in cultivated soils. The upland soil was further used to test soil CO2 emission response at different biochar addition levels during 70-days incubation. The measurement in the limited incubation period demonstrated that the addition of biochar improved the soil C content because it had high concentration of pyrogenic C, which was resistant to mineralization. The analysis showed that biochar addition can promote soil OC by mitigating carbon dioxide (CO2) emission. The biochar addition achieved the best performance for the soil carbon conservation in high-latitude agricultural area due to the originally high carbon content.

A study to identify research issues in the area of electromagnetic measurements and signal handling of remotely sensed data

NASA Technical Reports Server (NTRS)

1982-01-01

Research issues in the area of electromagnetic measurements and signal handling of remotely sensed data are identified. The following seven issues are discussed; platform/sensor system position and velocity, platform/sensor attitudes and attitude rates, optics and antennas, detectors and associated electronics, sensor calibration, signal handling, and system design.

Mineral resources of the Sheep Mountain Wilderness study area and the Cucamonga Wilderness and additions, Los Angeles and San Bernardino counties, California

USGS Publications Warehouse

Evans, James G.; Pankraatz, Leroy; Ridenour, James; Schmauch, Steven W.; Zilka, Nicholas T.

1977-01-01

A mineral survey of the Sheep Mountain Wilderness study area and Cucamonga Wilderness area and additions by the U.S. Geological Survey and Bureau of Mines in 1975 covered about 66,500 acres (26,500 ha) of the San Bernardino and Angeles National Forests in southern California. The two study areas are separated by San Antonio Canyon. The mineral resource potential was evaluated through geological, geochemical, and geophysical studies by the Geological Survey and through evaluation of mines and prospects by the Bureau of Mines.

Identifying suitable sites for Florida panther reintroduction

USGS Publications Warehouse

Thatcher, Cindy A.; van Manen, Frank T.; Clark, Joseph D.

2006-01-01

A major objective of the 1995 Florida Panther (Puma concolor cory) Recovery Plan is the establishment of 2 additional panther populations within the historic range. Our goal was to identify prospective sites for Florida panther reintroduction within the historic range based on quantitative landscape assessments. First, we delineated 86 panther home ranges using telemetry data collected from 1981 to 2001 in south Florida to develop a Mahalanobis distance (D2) habitat model, using 4 anthropogenic variables and 3 landscape variables mapped at a 500-m resolution. From that analysis, we identified 9 potential reintroduction sites of sufficient size to support a panther population. We then developed a similar D2 model at a higher spatial resolution to quantify the area of favorable panther habitat at each site. To address potential for the population to expand, we calculated the amount of favorable habitat adjacent to each prospective reintroduction site within a range of dispersal distances of female panthers. We then added those totals to the contiguous patches to estimate the total amount of effective panther habitat at each site. Finally, we developed an expert-assisted model to rank and incorporate potentially important habitat variables that were not appropriate for our empirical analysis (e.g., area of public lands, livestock density). Anthropogenic factors heavily influenced both the landscape and the expert-assisted models. Of the 9 areas we identified, the Okefenokee National Wildlife Refuge, Ozark National Forest, and Felsenthal National Wildlife Refuge regions had the highest combination of effective habitat area and expert opinion scores. Sensitivity analyses indicated that variability among key model parameters did not affect the high ranking of those sites. Those sites should be considered as starting points for the field evaluation of potential reintroduction sites.

Identifying Spatiotemporal Changes In Irrigated Area Across Southwestern Michigan, USA, Using Remote Sensing and Climate Data

NASA Astrophysics Data System (ADS)

Xu, T.; Deines, J. M.; Kendall, A. D.; Hyndman, D. W.

2017-12-01

Irrigation, which has become more common in humid regions, is the largest consumptive water use across the US and the globe. In southwestern Michigan, there has been a dramatic expansion in irrigation water use for row crops (primarily corn and soybean) in the past decade, mostly from groundwater pumping. The rapid expansion of irrigated row crops has potentially profound implications for terrestrial water balances, food production, and local to regional climate. Detailed maps of spatio-temporal changes in irrigation are essential to better understand irrigation impacts. However, accurate monitoring of irrigation area can be difficult in humid regions using remotely sensed methods due to the similarity in greenness between non-irrigated and irrigated areas in most years. Here, we use remote sensing to create annual, 30m-resolution maps of irrigated cropland by integrating Landsat and MODIS satellite products along with the PRISM climate dataset. From these data we developed spatial time series of vegetation and extreme weather indices, including novel indices we developed specifically to maximize detection of irrigation. Using these input data, machine learning classification was then performed over the region to identify irrigated crop area for each year. The resulting annual irrigation maps suggest that total irrigated area in southwestern Michigan increased by 160% from 2000 to 2017. The accuracy of the maps is assessed relative to maps created for an arid region using the same method. The maps can be integrated into hydrologic models to quantify irrigation impacts and support water resources management.

Self-Identifying Emergency Radio Beacons

NASA Technical Reports Server (NTRS)

Friedman, Morton L.

1987-01-01

Rescue teams aided by knowledge of vehicle in distress. Similar to conventional emergency transmitters except contains additional timing and modulating circuits. Additions to standard emergency transmitter enable transmitter to send rescuers identifying signal in addition to conventional distress signal created by sweep generator. Data generator contains identifying code.

SALMON RIVER BREAKS PRIMITIVE AREA AND VICINITY, IDAHO.

USGS Publications Warehouse

Kiilsgaard, Thor H.; Tuchek, Ernest T.

1984-01-01

A mineral survey of the Salmon River Breaks Primitive Area and vicinity in Idaho confirmed a substantiated gold resource potential in placer deposits along the Salmon River but determined that large-scale mining of the deposits probably would not be feasible. Except for demonstrated fluorspar resources at the Big Squaw Creek deposit, no other mineral resources were found in the area. The geologic environment, geochemical findings, and geophysical data all suggest little likelihood for the occurrence of additional mineral resources in the area. No energy resources were identified in this study.

Incorporating additional targets into learning trials for individuals with autism spectrum disorder.

PubMed

Nottingham, Casey L; Vladescu, Jason C; Kodak, Tiffany M

2015-01-01

Recently, researchers have investigated the effectiveness and efficiency of presenting secondary targets during learning trials for individuals with autism spectrum disorder (ASD). This instructional method may be more efficient than typical methods used with learners with ASD, because learners may acquire secondary targets without additional instruction. This review will discuss the recent literature on providing secondary targets during teaching trials for individuals with ASD, identify common aspects and results among these studies, and identify areas for future research. © Society for the Experimental Analysis of Behavior.

Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components

DOE PAGES

Kishore, Vidya; Ajinjeru, Christine; Nycz, Andrzej; ...

2017-03-01

The Big Area Additive Manufacturing (BAAM) system can print structures on the order of several meters at high extrusion rates, thereby having the potential to significantly impact automotive, aerospace and energy sectors. The functional use of such parts, however, may be limited by mechanical anisotropy in which the strength of printed parts across successive layers in the build direction (z-direction) is significantly lower than the corresponding in-plane strength (x-y directions). This has been primarily attributed to poor bonding between printed layers as the lower layers cool below the glass transition temperature (Tg) before the next layer is deposited. Therefore, themore » potential of using infrared heating is considered for increasing the surface temperature of the printed layer just prior to deposition of new material to improve the interlayer strength of the components. This study found significant improvements in bond strength for the deposition of acrylonitrile butadiene styrene (ABS) reinforced with 20% chopped carbon fiber when the surface temperature of the substrate material was increased from below Tg to close to or above Tg using infrared heating.« less

Infrared preheating to improve interlayer strength of big area additive manufacturing (BAAM) components

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kishore, Vidya; Ajinjeru, Christine; Nycz, Andrzej

The Big Area Additive Manufacturing (BAAM) system can print structures on the order of several meters at high extrusion rates, thereby having the potential to significantly impact automotive, aerospace and energy sectors. The functional use of such parts, however, may be limited by mechanical anisotropy in which the strength of printed parts across successive layers in the build direction (z-direction) is significantly lower than the corresponding in-plane strength (x-y directions). This has been primarily attributed to poor bonding between printed layers as the lower layers cool below the glass transition temperature (Tg) before the next layer is deposited. Therefore, themore » potential of using infrared heating is considered for increasing the surface temperature of the printed layer just prior to deposition of new material to improve the interlayer strength of the components. This study found significant improvements in bond strength for the deposition of acrylonitrile butadiene styrene (ABS) reinforced with 20% chopped carbon fiber when the surface temperature of the substrate material was increased from below Tg to close to or above Tg using infrared heating.« less

Identifying Potential Areas of Human Zika Infection in the City of Los Angeles, California by Use of Remote Sensing Imagery

NASA Astrophysics Data System (ADS)

Lee, J.

2017-12-01

As of April 2017, California is the third most prevalent state on the United States for Zika Infection and Southern California has an ever growing population of Aedes mosquitos. Zika is a disease which poses a significant risk to humans and other mammals due to its effects on pregnancy. This emerging disease is highly contagious due to its spread of infection primarily by Aedes aegypti mosquitos. Aedes mosquitos are able to breed in small rain collecting containers which allow the species to persevere in urban and semi urban environments. We hope to identify potential areas with risk of human infection within Los Angeles and its surrounding areas. This study integrates remote sensing, GIS, statistical, and environmental techniques to study favorable habitats for this particular species of mosquitos and their larvae. The study of the geographic and landscape factors which promote the larvae development allow for the disease spread to be analyzed and modeled. There are several goals in the development of this study. These include the coordination of statistical data with local epidemiology departments, identify workflows to improve efficiency, create models which can be utilized for disease prevention, and identify geographic risk factors for the spread of Zika.

Assessing shortfalls and complementary conservation areas for national plant biodiversity in South Korea.

PubMed

Choe, Hyeyeong; Thorne, James H; Huber, Patrick R; Lee, Dongkun; Quinn, James F

2018-01-01

Protected areas (PAs) are often considered the most important biodiversity conservation areas in national plans, but PAs often do not represent national-scale biodiversity. We evaluate the current conservation status of plant biodiversity within current existing PAs, and identify potential additional PAs for South Korea. We modeled species ranges for 2,297 plant species using Multivariate Adaptive Regression Splines and compared the level of mean range representation in South Korea's existing PAs, which comprise 5.7% of the country's mainland area, with an equal-area alternative PA strategy selected with the reserve algorithm Marxan. We also used Marxan to model two additional conservation scenarios that add lands to approach the Aichi Biodiversity Target objectives (17% of the country). Existing PAs in South Korea contain an average of 6.3% of each plant species' range, compared to 5.9% in the modeled equal-area alternative. However, existing PAs primarily represent a high percentage of the ranges for high-elevation and small range size species. The additional PAs scenario that adds lands to the existing PAs covers 14,587.55 km2, and would improve overall plant range representation to a mean of 16.8% of every species' range. The other additional PAs scenario, which selects new PAs from all lands and covers 13,197.35 km2, would improve overall plant range representation to a mean of 13.5%. Even though the additional PAs that includes existing PAs represents higher percentages of species' ranges, it is missing many biodiversity hotspots in non-mountainous areas and the additional PAs without locking in the existing PAs represent almost all species' ranges evenly, including low-elevation ones with larger ranges. Some priority conservation areas we identified are expansions of, or near, existing PAs, especially in northeastern and southern South Korea. However, lowland coastal areas and areas surrounding the capital city, Seoul, are also critical for biodiversity

Assessing shortfalls and complementary conservation areas for national plant biodiversity in South Korea

PubMed Central

Thorne, James H.; Huber, Patrick R.; Lee, Dongkun; Quinn, James F.

2018-01-01

Protected areas (PAs) are often considered the most important biodiversity conservation areas in national plans, but PAs often do not represent national-scale biodiversity. We evaluate the current conservation status of plant biodiversity within current existing PAs, and identify potential additional PAs for South Korea. We modeled species ranges for 2,297 plant species using Multivariate Adaptive Regression Splines and compared the level of mean range representation in South Korea’s existing PAs, which comprise 5.7% of the country’s mainland area, with an equal-area alternative PA strategy selected with the reserve algorithm Marxan. We also used Marxan to model two additional conservation scenarios that add lands to approach the Aichi Biodiversity Target objectives (17% of the country). Existing PAs in South Korea contain an average of 6.3% of each plant species’ range, compared to 5.9% in the modeled equal-area alternative. However, existing PAs primarily represent a high percentage of the ranges for high-elevation and small range size species. The additional PAs scenario that adds lands to the existing PAs covers 14,587.55 km2, and would improve overall plant range representation to a mean of 16.8% of every species’ range. The other additional PAs scenario, which selects new PAs from all lands and covers 13,197.35 km2, would improve overall plant range representation to a mean of 13.5%. Even though the additional PAs that includes existing PAs represents higher percentages of species’ ranges, it is missing many biodiversity hotspots in non-mountainous areas and the additional PAs without locking in the existing PAs represent almost all species’ ranges evenly, including low-elevation ones with larger ranges. Some priority conservation areas we identified are expansions of, or near, existing PAs, especially in northeastern and southern South Korea. However, lowland coastal areas and areas surrounding the capital city, Seoul, are also critical for

Multiscale, multispectral and multitemporal satellite data to identify archaeological remains in the archaeological area of Tiwanaku (Bolivia)

NASA Astrophysics Data System (ADS)

Masini, Nicola; Lasaponara, Rosa

2015-04-01

The aim of this paper is to investigate the cultural landscape of the archaeological area of Tiwanaku (Bolivia) using multiscale, multispectral and multitemporal satellite data. Geospatial analysis techniques were applied to the satellite data sets in order to enhance and map traces of past human activities and perform a spatial characterization of environmental and cultural patterns. In particular, in the Tiwanaku area, the approach based on local indicators of spatial autocorrelation (LISA) applied to ASTER data allowed us to identify traces of a possible ancient hydrographic network with a clear spatial relation with the well-known moat surrounding the core of the monumental area. The same approach applied to QuickBird data, allowed us to identify numerous traces of archaeological interest, in Mollo Kontu mound, less investigated than the monumental area. Some of these traces were in perfect accordance with the results of independent studies, other were completely unknown. As a whole, the detected features, composing a geometric pattern with roughly North-South orientation, closely match those of the other residential contexts at Tiwanaku. These new insights, captured from multitemporal ASTER and QuickBird data processing, suggested new questions on the ancient landscape and provided important information for planning future field surveys and archaeogeophyical investigations. Reference [1] Lasaponara R., Masini N. 2014. Beyond modern landscape features: New insights in thearchaeological area of Tiwanaku in Bolivia from satellite data. International Journal of Applied Earth Observation and Geoinformation, 26, 464-471, http://dx.doi.org/10.1016/j.jag.2013.09.00. [2] Tapete D., Cigna F., Masini N., Lasaponara R. 2013. Prospection and monitoring of the archaeological heritage of Nasca, Peru, with ENVISAT ASAR, Archaeological Prospection, 20, 133-147, doi: 10.1002/arp.1449. [3] Lasaponara R, N Masini, 2012 Satellite Remote Sensing, A New Tool for Archaeology (Series

Molecular characterization of an unauthorized genetically modified Bacillus subtilis production strain identified in a vitamin B2 feed additive.

PubMed

Paracchini, Valentina; Petrillo, Mauro; Reiting, Ralf; Angers-Loustau, Alexandre; Wahler, Daniela; Stolz, Andrea; Schönig, Birgit; Matthies, Anastasia; Bendiek, Joachim; Meinel, Dominik M; Pecoraro, Sven; Busch, Ulrich; Patak, Alex; Kreysa, Joachim; Grohmann, Lutz

2017-09-01

Many food and feed additives result from fermentation of genetically modified (GM) microorganisms. For vitamin B2 (riboflavin), GM Bacillus subtilis production strains have been developed and are often used. The presence of neither the GM strain nor its recombinant DNA is allowed for fermentation products placed on the EU market as food or feed additive. A vitamin B 2 product (80% feed grade) imported from China was analysed. Viable B. subtilis cells were identified and DNAs of two bacterial isolates (LHL and LGL) were subjected to three whole genome sequencing (WGS) runs with different devices (MiSeq, 454 or HiSeq system). WGS data revealed the integration of a chloramphenicol resistance gene, the deletion of the endogenous riboflavin (rib) operon and presence of four putative plasmids harbouring rib operons. Event- and construct-specific real-time PCR methods for detection of the GM strain and its putative plasmids in food and feed products have been developed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Estimating forest biomass and identifying low-intensity logging areas using airborne scanning lidar in Antimary State Forest, Acre State, Western Brazilian Amazon

Treesearch

Marcus V.N. d' Oliveira; Stephen E. Reutebuch; Robert J. McGaughey; Hans-Erik. Andersen

2012-01-01

The objectives of this study were to estimate above ground forest biomass and identify areas disturbed by selective logging in a 1000 ha Brazilian tropical forest in the Antimary State Forest using airborne lidar data. The study area consisted of three management units, two of which were unlogged, while the third unit was selectively logged at a low intensity. A...

Identifying sturgeon spawning locations through back-calculations of drift

USGS Publications Warehouse

Bulliner, Edward A.; Erwin, Susannah O.; Jacobson, Robert B.; Chojnacki, Kimberly A.; George, Amy E.; Delonay, Aaron J.

2016-01-01

Unfavorable spawning habitat conditions have been identified as a potential limiting factor for recovery of the endangered pallid sturgeon on the Missouri River and its tributaries. After successful spawning, incubation, and hatching, sturgeon free embryos passively drift downstream and are sometimes captured by sampling crews. While spawning habitat has been identified at time of spawning through field investigations, captured pallid and shovelnose (used as a surrogate species) sturgeon free embryos in the Missouri River often do not come from genetically-known telemetered fish and may be useful to identify additional areas of spawning habitat. We developed a routing model to identify potential spawning locations for captured free embryos of known age based on channel velocity estimates. To estimate velocity we compared use of at-a-station hydraulic geometry relations to empirical estimates of velocity form a 15-year archive of hydroacoustic measurements on the Missouri River.

Level 1 remedial investigation work plan, 300 Area Process Ponds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

This report discusses the objectives of the site characterization for the 300 Area Process Ponds which are to identify and quantify contamination at the ponds and to estimate their potential impact on human health and the environment. The results of the site characterization will be used to identify any future actions related to contamination at the site and to identify any additional data requirements needed to support selection of a remedial action. 9 refs., 12 figs., 8 tabs.

Identifying forest lands in urban areas in the Central Hardwood Region

Treesearch

Thomas W. Birch; Rachel Riemann Hershey; Philip Kern

1997-01-01

Forests in urban areas are an important component of urban and suburban environments. They provide places for recreation and environmental education, wildlife habitat for species adapted to living near humans, contribute to general human physical and psychological health. Knowing how much and what type of forest exists in urban areas provides critical baseline data for...

An Integrated H-G Scheme Identifying Areas for Soil Remediation and Primary Heavy Metal Contributors: A Risk Perspective.

PubMed

Zou, Bin; Jiang, Xiaolu; Duan, Xiaoli; Zhao, Xiuge; Zhang, Jing; Tang, Jingwen; Sun, Guoqing

2017-03-23

Traditional sampling for soil pollution evaluation is cost intensive and has limited representativeness. Therefore, developing methods that can accurately and rapidly identify at-risk areas and the contributing pollutants is imperative for soil remediation. In this study, we propose an innovative integrated H-G scheme combining human health risk assessment and geographical detector methods that was based on geographical information system technology and validated its feasibility in a renewable resource industrial park in mainland China. With a discrete site investigation of cadmium (Cd), arsenic (As), copper (Cu), mercury (Hg) and zinc (Zn) concentrations, the continuous surfaces of carcinogenic risk and non-carcinogenic risk caused by these heavy metals were estimated and mapped. Source apportionment analysis using geographical detector methods further revealed that these risks were primarily attributed to As, according to the power of the determinant and its associated synergic actions with other heavy metals. Concentrations of critical As and Cd, and the associated exposed CRs are closed to the safe thresholds after remediating the risk areas identified by the integrated H-G scheme. Therefore, the integrated H-G scheme provides an effective approach to support decision-making for regional contaminated soil remediation at fine spatial resolution with limited sampling data over a large geographical extent.

GWAS of human bitter taste perception identifies new loci and reveals additional complexity of bitter taste genetics.

PubMed

Ledda, Mirko; Kutalik, Zoltán; Souza Destito, Maria C; Souza, Milena M; Cirillo, Cintia A; Zamboni, Amabilene; Martin, Nathalie; Morya, Edgard; Sameshima, Koichi; Beckmann, Jacques S; le Coutre, Johannes; Bergmann, Sven; Genick, Ulrich K

2014-01-01

Human perception of bitterness displays pronounced interindividual variation. This phenotypic variation is mirrored by equally pronounced genetic variation in the family of bitter taste receptor genes. To better understand the effects of common genetic variations on human bitter taste perception, we conducted a genome-wide association study on a discovery panel of 504 subjects and a validation panel of 104 subjects from the general population of São Paulo in Brazil. Correction for general taste-sensitivity allowed us to identify a SNP in the cluster of bitter taste receptors on chr12 (10.88- 11.24 Mb, build 36.1) significantly associated (best SNP: rs2708377, P = 5.31 × 10(-13), r(2) = 8.9%, β = -0.12, s.e. = 0.016) with the perceived bitterness of caffeine. This association overlaps with-but is statistically distinct from-the previously identified SNP rs10772420 influencing the perception of quinine bitterness that falls in the same bitter taste cluster. We replicated this association to quinine perception (P = 4.97 × 10(-37), r(2) = 23.2%, β = 0.25, s.e. = 0.020) and additionally found the effect of this genetic locus to be concentration specific with a strong impact on the perception of low, but no impact on the perception of high concentrations of quinine. Our study, thus, furthers our understanding of the complex genetic architecture of bitter taste perception.

Evaluation of Additively Manufactured Metals for Use in Oxygen Systems Project

NASA Technical Reports Server (NTRS)

Tylka, Jonathan; Cooper, Ken; Peralta, Stephen; Wilcutt, Terrence; Hughitt, Brian; Generazio, Edward

2016-01-01

Space Launch System, Commercial Resupply, and Commercial Crew programs have published intent to use additively manufactured (AM) components in propulsion systems and are likely to include various life support systems in the future. Parts produced by these types of additive manufacturing techniques have not been fully evaluated for use in oxygen systems and the inherent risks have not been fully identified. Some areas of primary concern in the SLS process with respect to oxygen compatibility may be the porosity of the printed parts, fundamental differences in microstructure of an AM part as compared to traditional materials, or increased risk of shed metal particulate into an oxygen system. If an ignition were to occur the printed material could be more flammable than components manufactured from a traditional billet of raw material and/or present a significant hazards if not identified and rigorously studied in advance of implementation into an oxygen system.

Genome-wide association study identifies multiple loci associated with both mammographic density and breast cancer risk

PubMed Central

Lindström, Sara; Thompson, Deborah J.; Paterson, Andrew D.; Li, Jingmei; Gierach, Gretchen L.; Scott, Christopher; Stone, Jennifer; Douglas, Julie A.; dos-Santos-Silva, Isabel; Fernandez-Navarro, Pablo; Verghase, Jajini; Smith, Paula; Brown, Judith; Luben, Robert; Wareham, Nicholas J.; Loos, Ruth J.F.; Heit, John A.; Pankratz, V. Shane; Norman, Aaron; Goode, Ellen L.; Cunningham, Julie M.; deAndrade, Mariza; Vierkant, Robert A.; Czene, Kamila; Fasching, Peter A.; Baglietto, Laura; Southey, Melissa C.; Giles, Graham G.; Shah, Kaanan P.; Chan, Heang-Ping; Helvie, Mark A.; Beck, Andrew H.; Knoblauch, Nicholas W.; Hazra, Aditi; Hunter, David J.; Kraft, Peter; Pollan, Marina; Figueroa, Jonine D.; Couch, Fergus J.; Hopper, John L.; Hall, Per; Easton, Douglas F.; Boyd, Norman F.; Vachon, Celine M.; Tamimi, Rulla M.

2015-01-01

Mammographic density reflects the amount of stromal and epithelial tissues in relation to adipose tissue in the breast and is a strong risk factor for breast cancer. Here we report the results from meta-analysis of genome-wide association studies (GWAS) of three mammographic density phenotypes: dense area, non-dense area and percent density in up to 7,916 women in stage 1 and an additional 10,379 women in stage 2. We identify genome-wide significant (P<5×10−8) loci for dense area (AREG, ESR1, ZNF365, LSP1/TNNT3, IGF1, TMEM184B, SGSM3/MKL1), non-dense area (8p11.23) and percent density (PRDM6, 8p11.23, TMEM184B). Four of these regions are known breast cancer susceptibility loci, and four additional regions were found to be associated with breast cancer (P<0.05) in a large meta-analysis. These results provide further evidence of a shared genetic basis between mammographic density and breast cancer and illustrate the power of studying intermediate quantitative phenotypes to identify putative disease susceptibility loci. PMID:25342443

Additive manufactured serialization

DOEpatents

Bobbitt, III, John T.

2017-04-18

Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

North Carolina Toxic Substance Incidents Program 2010–2015: Identifying Areas for Injury Prevention Efforts

PubMed Central

Eiffert, Samantha; Etienne, Suze; Hirsch, Annie

2017-01-01

The National Toxic Substance Incidents Program (NTSIP) is a surveillance system designed to capture acute toxic substance releases, factors contributing to the release, and any associated injuries. North Carolina has participated since 2010, when NTSIP was established. This article will present a descriptive statistical summary from 2010 to 2015 focused on releases that resulted in injuries in order to identify areas for public health prevention efforts. Of the 1690 toxic releases in North Carolina, 155 incidents resulted in injuries and 500 people were injured. Carbon monoxide injured the greatest number of people. Of the incidents that resulted in injuries, 68 occurred at private vehicles or residences (44%), injuring 124 people (25%). Over half of events where at least one responder was injured occurred at private vehicles or residences. Events occurring at private residences did not have a significant relationship between evacuations and injuries, while for industry-related events, the odds of an evacuation being ordered were 8.18 times greater (OR = 8.18, 95% CI = 5.19, 12.89) when there were injuries associated with an event. Intervention efforts should focus on preventing responder injuries while responding to private residence releases and educating the general public on how to prevent injuries by self-evacuating areas where hazardous chemicals have been released. PMID:29051448

Optimising in situ gamma measurements to identify the presence of radioactive particles in land areas.

PubMed

Rostron, Peter D; Heathcote, John A; Ramsey, Michael H

2014-12-01

High-coverage in situ surveys with gamma detectors are the best means of identifying small hotspots of activity, such as radioactive particles, in land areas. Scanning surveys can produce rapid results, but the probabilities of obtaining false positive or false negative errors are often unknown, and they may not satisfy other criteria such as estimation of mass activity concentrations. An alternative is to use portable gamma-detectors that are set up at a series of locations in a systematic sampling pattern, where any positive measurements are subsequently followed up in order to determine the exact location, extent and nature of the target source. The preliminary survey is typically designed using settings of detector height, measurement spacing and counting time that are based on convenience, rather than using settings that have been calculated to meet requirements. This paper introduces the basis of a repeatable method of setting these parameters at the outset of a survey, for pre-defined probabilities of false positive and false negative errors in locating spatially small radioactive particles in land areas. It is shown that an un-collimated detector is more effective than a collimated detector that might typically be used in the field. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

77 FR 22663 - Asian Longhorned Beetle; Additions to Quarantined Areas in Massachusetts

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-17

... Koelreuteria (golden raintree) to the list of regulated articles. The interim rule, which restricted the interstate movement of regulated articles from these areas, was necessary to prevent the artificial spread of... interstate movement of regulated articles from quarantined areas to prevent the artificial spread of ALB to...

Ring-Shaped Seismicity Structures in the Areas of Sarez and Nurek Water Reservoirs (Tajikistan): Lithosphere Adaptation to Additional Loading

NASA Astrophysics Data System (ADS)

Kopnichev, Yu. F.; Sokolova, I. N.

2017-12-01

Seismicity characteristics in the areas of Sarez Lake and the Nurek water reservoir are studied. Ring-shaped seismicity structures in two depth ranges (0-33 and 34-70 km) formed prior to the Pamir earthquake of December 7, 2015 ( M w = 7.2). Seismicity rings cross each other near the Usoi Dam, which formed after the strong earthquake in 1911 and led to the formation of Sarez Lake, and near the epicenter of the Pamir earthquake. In addition, three out of the four strongest events ( M ≥ 6.0) recorded in the Pamir region at depths of more than 70 km since 1950 have occurred near Sarez Lake. An aggregate of the data allows us to conclude that the Pamir earthquake, despite its very large energy, refers to events related to induced seismicity. Ring-shaped seismicity structures in two depth ranges also formed in the Nurek water reservoir area. It is supposed that the formation of ring-shaped structures is related to the self-organization processes of a geological system, which result in the ascent of deep-seated fluids. In this respect, the lithosphere is gradually adapting to the additional load related to the filling of the water reservoir. The difference between Nurek Dam (and many other hydroelectric power stations as well) and Usoi Dam is the permanent vibration in the former case due to water falling from a height of more than 200 m. Such an effect can lead to gradual stress dissipation, resulting in the occurrence of much weaker events when compared to the Pamir earthquake of December 7, 2015, in the areas of artificial water reservoirs.

Spatial Accessibility to Health Care Services: Identifying under-Serviced Neighbourhoods in Canadian Urban Areas.

PubMed

Shah, Tayyab Ikram; Bell, Scott; Wilson, Kathi

2016-01-01

Urban environments can influence many aspects of health and well-being and access to health care is one of them. Access to primary health care (PHC) in urban settings is a pressing research and policy issue in Canada. Most research on access to healthcare is focused on national and provincial levels in Canada; there is a need to advance current understanding to local scales such as neighbourhoods. This study examines spatial accessibility to family physicians using the Three-Step Floating Catchment Area (3SFCA) method to identify neighbourhoods with poor geographical access to PHC services and their spatial patterning across 14 Canadian urban settings. An index of spatial access to PHC services, representing an accessibility score (physicians-per-1000 population), was calculated for neighborhoods using a 3km road network distance. Information about primary health care providers (this definition does not include mobile services such as health buses or nurse practitioners or less distributed services such as emergency rooms) used in this research was gathered from publicly available and routinely updated sources (i.e. provincial colleges of physicians and surgeons). An integrated geocoding approach was used to establish PHC locations. The results found that the three methods, Simple Ratio, Neighbourhood Simple Ratio, and 3SFCA that produce City level access scores are positively correlated with each other. Comparative analyses were performed both within and across urban settings to examine disparities in distributions of PHC services. It is found that neighbourhoods with poor accessibility scores in the main urban settings across Canada have further disadvantages in relation to population high health care needs. The results of this study show substantial variations in geographical accessibility to PHC services both within and among urban areas. This research enhances our understanding of spatial accessibility to health care services at the neighbourhood level. In

Spatial Accessibility to Health Care Services: Identifying under-Serviced Neighbourhoods in Canadian Urban Areas

PubMed Central

Shah, Tayyab Ikram; Bell, Scott; Wilson, Kathi

2016-01-01

Background Urban environments can influence many aspects of health and well-being and access to health care is one of them. Access to primary health care (PHC) in urban settings is a pressing research and policy issue in Canada. Most research on access to healthcare is focused on national and provincial levels in Canada; there is a need to advance current understanding to local scales such as neighbourhoods. Methods This study examines spatial accessibility to family physicians using the Three-Step Floating Catchment Area (3SFCA) method to identify neighbourhoods with poor geographical access to PHC services and their spatial patterning across 14 Canadian urban settings. An index of spatial access to PHC services, representing an accessibility score (physicians-per-1000 population), was calculated for neighborhoods using a 3km road network distance. Information about primary health care providers (this definition does not include mobile services such as health buses or nurse practitioners or less distributed services such as emergency rooms) used in this research was gathered from publicly available and routinely updated sources (i.e. provincial colleges of physicians and surgeons). An integrated geocoding approach was used to establish PHC locations. Results The results found that the three methods, Simple Ratio, Neighbourhood Simple Ratio, and 3SFCA that produce City level access scores are positively correlated with each other. Comparative analyses were performed both within and across urban settings to examine disparities in distributions of PHC services. It is found that neighbourhoods with poor accessibility scores in the main urban settings across Canada have further disadvantages in relation to population high health care needs. Conclusions The results of this study show substantial variations in geographical accessibility to PHC services both within and among urban areas. This research enhances our understanding of spatial accessibility to health care

Educational Personnel Needs Assessment: CSPD Technical Manual, 1989. Critical Areas of Data Collection.

ERIC Educational Resources Information Center

Lauritzen, Paul

This manual addresses the Comprehensive System of Personnel Development (CSPD) requirement of Public Law 94-142. It presents model procedures for the collection of data necessary to project personnel needs in special education. Implementation of the model will identify: areas of education which show need for additional teachers as well as areas of…

Identifying Distribution of Chlorophyll-a Concentration Using Landsat 8 OLI on Marine Waters Area of Cirebon

NASA Astrophysics Data System (ADS)

Buditama, Gilang; Damayanti, Astrid; Giok Pin, Tjiong

2017-12-01

Phytoplankton is a microscopic plant that has a function to produces oxygen and organic substances. It also plays a role as a main producer in the food chain of a marine ecosystem. Chlorophyll-a is a colour pigment most common in phytoplankton species, so that the concentration level of chlorophyll-a can be used as an indicator of the abundance of phytoplankton cells, and as a reference for predicting organic potency in the aquatic area. This research discusses about the spatial and temporal distribution of chlorophyll-a and its correlation with salinity and total suspended solid (TSS), in the seawaters of Cirebon, West Java. The goal of this research is to be a source of information for fishermen, and other stakeholders whose related subjects in the field of marine and fisheries to predict fertile water regions and can also be used as an indicator in discovering potential areas to catch pelagic fish in Cirebon seawaters. Chlorophyll-a concentration, salinity, and TSS are identified using remote sensing data such as Landsat-8 OLI multi temporal images according to dry and wet month parameters in the 2014-2015. The results of the processed image are then validated between in-situ measurements in the field and remote sensing imagery at the same time. This research utilizes descriptive analysis, and statistics with spatial approach. The results of the research show that temporally, chlorophyll-a levels have a tendency to be higher in wet months compared to dry months, while chlorophyll-a is higher in areas near the coastline compared to open sea areas. The distribution of chlorophyll-a concentration is affected by salinity and TSS distribution, where salinity has the negative relationship and TSS has the positive relationship with chlorophyll-a distribution.

GWAS of human bitter taste perception identifies new loci and reveals additional complexity of bitter taste genetics

PubMed Central

Ledda, Mirko; Kutalik, Zoltán; Souza Destito, Maria C.; Souza, Milena M.; Cirillo, Cintia A.; Zamboni, Amabilene; Martin, Nathalie; Morya, Edgard; Sameshima, Koichi; Beckmann, Jacques S.; le Coutre, Johannes; Bergmann, Sven; Genick, Ulrich K.

2014-01-01

Human perception of bitterness displays pronounced interindividual variation. This phenotypic variation is mirrored by equally pronounced genetic variation in the family of bitter taste receptor genes. To better understand the effects of common genetic variations on human bitter taste perception, we conducted a genome-wide association study on a discovery panel of 504 subjects and a validation panel of 104 subjects from the general population of São Paulo in Brazil. Correction for general taste-sensitivity allowed us to identify a SNP in the cluster of bitter taste receptors on chr12 (10.88– 11.24 Mb, build 36.1) significantly associated (best SNP: rs2708377, P = 5.31 × 10−13, r2 = 8.9%, β = −0.12, s.e. = 0.016) with the perceived bitterness of caffeine. This association overlaps with—but is statistically distinct from—the previously identified SNP rs10772420 influencing the perception of quinine bitterness that falls in the same bitter taste cluster. We replicated this association to quinine perception (P = 4.97 × 10−37, r2 = 23.2%, β = 0.25, s.e. = 0.020) and additionally found the effect of this genetic locus to be concentration specific with a strong impact on the perception of low, but no impact on the perception of high concentrations of quinine. Our study, thus, furthers our understanding of the complex genetic architecture of bitter taste perception. PMID:23966204

76 FR 1339 - Pine Shoot Beetle; Additions to Quarantined Areas

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-10

..., a pest of pine trees, into noninfested areas of the United States. DATES: Effective on January 10... managed and natural stands of pine and especially affects weak and dying trees. The beetle has been found... distorted growth in host trees. Large infestations of PSB typically kill most of the lateral shoots near the...

Working in disadvantaged communities: What additional competencies do we need?

PubMed Central

Harris, Elizabeth; Harris, Mark F; Madden, Lynne; Wise, Marilyn; Sainsbury, Peter; MacDonald, John; Gill, Betty

2009-01-01

Background Residents of socioeconomically disadvantaged locations are more likely to have poor health than residents of socioeconomically advantaged locations and this has been comprehensively mapped in Australian cities. These inequalities present a challenge for the public health workers based in or responsible for improving the health of people living in disadvantaged localities. The purpose of this study was to develop a generic workforce needs assessment tool and to use it to identify the competencies needed by the public health workforce to work effectively in disadvantaged communities. Methods A two-step mixed method process was used to identify the workforce needs. In step 1 a generic workforce needs assessment tool was developed and applied in three NSW Area Health Services using focus groups, key stakeholder interviews and a staff survey. In step 2 the findings of this needs assessment process were mapped against the existing National Health Training Package (HLT07) competencies, gaps were identified, additional competencies described and modules of training developed to fill identified gaps. Results There was a high level of agreement among the AHS staff on the nature of the problems to be addressed but less confidence indentifying the work to be done. Processes for needs assessments, community consultations and adapting mainstream programs to local needs were frequently mentioned as points of intervention. Recruiting and retaining experienced staff to work in these communities and ensuring their safety were major concerns. Workforce skill development needs were seen in two ways: higher order planning/epidemiological skills and more effective working relationships with communities and other sectors. Organisational barriers to effective practice were high levels of annual compulsory training, balancing state and national priorities with local needs and giving equal attention to the population groups that are easy to reach and to those that are difficult

Retrospective analyses of fox feces by real-time PCR to identify new endemic areas of Echinococcus multilocularis in France.

PubMed

Umhang, Gérald; Comte, Sébastien; Hormaz, Vanessa; Boucher, Jean-Marc; Raton, Vincent; Favier, Stéphanie; Raoul, Francis; Giraudoux, Patrick; Combes, Benoît; Boué, Franck

2016-11-01

Alveolar echinococcosis is considered to be the most serious zoonosis in the Northern Hemisphere's cold or temperate regions. In Europe, the parasite has a sylvatic life cycle based on predator-prey interactions, mainly between red foxes and small rodents. Echinococcus multilocularis has been observed to have spread across Europe over the last three decades. In France, a westward spread of the parasite's known endemic areas has been described. In this study, a retrospective analysis of fox feces by real-time PCR was carried out in four départements not previously investigated and considered free along with two endemic control departments. The fox feces collected from 2000 to 2004 were analyzed by real-time PCR. Fecal prevalence in the two endemic departments of Doubs and Côte d'Or were estimated at 12 % [6.4-20.0 %] and 4.2 % [1.1-10.3 %], respectively. No positive samples were identified among the 72 feces collected in Drôme or the 112 from Allier, which is consistent with the very low expected prevalence should the parasite be present. Three positive samples were recovered in the Seine-Maritime and Hautes-Alpes départements, resulting in a prevalence of 3.5 % [0.7-10.0 %] and 2.5 % [0.5-7.1 %], respectively. From now on, Hautes-Alpes constitutes the new southern border of the endemic areas in France and confirms the southward expansion previously highlighted. Real-time copro-PCR proved useful in identifying new endemic areas even with low prevalence. Due to the spread of E. multilocularis in France and associated zoonotic risk, it is necessary to expand surveillance in order to fully define all the country's endemic areas. On a continental scale, the development and harmonization of surveillance programs are now needed in order to obtain a global overview of the presence of E. multilocularis and to tailor potential countermeasures.

Where to Go Next? Identifying Target Areas in the North Atlantic for Future Seafloor Mapping Initiatives

NASA Astrophysics Data System (ADS)

Woelfl, A. C.; Jencks, J.; Johnston, G.; Varner, J. D.; Devey, C. W.

2017-12-01

Human activities are rapidly expanding into the oceans, yet detailed bathymetric maps do not exist for most of the seafloor that would permit governments to formulate sensible usage rules. Changing this situation will require an enormous international mapping effort. To ensure that this effort is directed towards the regions most in need of mapping, we need to know which areas have already been mapped and which areas are potentially most interesting. Despite various mapping efforts in recent years, large parts of the Atlantic still lack detailed bathymetric information. To successfully plan for future mapping efforts to fill these gaps, knowledge of current data coverage is imperative to avoid duplication of effort. While certain datasets are publically available online (e.g. NOAA's NCEI, EMODnet, IHO-DCDB, LDEO's GMRT), many are not. However, with the limited information we do have at hand, the question remains, where should we map next? And what criteria should we take into account? In 2016, a study was taken on as part of the efforts of the International Atlantic Seabed Mapping Working Group (ASMIWG). The ASMIWG, established by the Tri-Partite Galway Statement Implementation Committee, was tasked to develop a cohesive seabed mapping strategy for the Atlantic Ocean. The aim of our study was to develop a reproducible process for identifying and evaluating potential target areas within the North Atlantic that represent suitable sites for future bathymetric surveys. The sites were selected by applying a GIS-based suitability analysis that included specific user group-based parameters of the marine environment. Furthermore, information regarding current data coverage were gathered to take into account in the selection process. The results reveal the suitability of sites within the North Atlantic based on the selected criteria. Three potential target sites should be seen as flexible suggestions for future mapping initiatives rather than a rigid, defined set of areas

Identifying mismatches between institutional perceptions of water-related risk drivers and water management strategies in three river basin areas

NASA Astrophysics Data System (ADS)

Räsänen, Aleksi; Juhola, Sirkku; Monge Monge, Adrián; Käkönen, Mira; Kanninen, Markku; Nygren, Anja

2017-07-01

Water-related risks and vulnerabilities are driven by variety of stressors, including climate and land use change, as well as changes in socio-economic positions and political landscapes. Hence, water governance, which addresses risks and vulnerabilities, should target multiple stressors. We analyze the institutional perceptions of the drivers and strategies for managing water-related risks and vulnerabilities in three regionally important river basin areas located in Finland, Mexico, and Laos. Our analysis is based on data gathered through participatory workshops and complemented by qualitative content analysis of relevant policy documents. The identified drivers and proposed risk reduction strategies showed the multidimensionality and context-specificity of water-related risks and vulnerabilities across study areas. Most of the identified drivers were seen to increase risks, but some of the drivers were positive trends, and drivers also included also policy instruments that can both increase or decrease risks. Nevertheless, all perceived drivers were not addressed with suggested risk reduction strategies. In particular, most of the risk reduction strategies were incremental adjustments, although many of the drivers classified as most important were large-scale trends, such as climate change, land use changes and increase in foreign investments. We argue that there is a scale mismatch between the identified drivers and suggested strategies, which questions the opportunity to manage the drivers by single-scale incremental adjustments. Our study suggests that for more sustainable risk and vulnerability reduction, the root causes of water-related risks and vulnerabilities should be addressed through adaptive multi-scale governance that carefully considers the context-specificity and the multidimensionality of the associated drivers and stressors.

77 FR 13009 - Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 80 [EPA-HQ-OAR-2011-0542; FRL-9642-3] RIN 2060-AR07 Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel Pathways Under... of Sec. 80.1426 to identify additional renewable fuel production pathways and pathway components that...

Methodology for Identifying and Quantifying Metal Pollutant Sources in Storm Water Runoff

DTIC Science & Technology

2015-02-01

sanitary sewer are not viable options. In addition, visual inspections of the drainage areas have been insufficient in identifying and quantifying the...diverting the runoff into the sanitary sewer system, but the cost could exceed millions of dollars. Instead of capturing and treating all stormwater...Unknown Appears only if Building Siding is “metal” Roof Material roof_mat_d Built Up, Metal Panel, Asphalt, Fabric, Clay , Slate, Wood, Other

A simple method to identify areas of environmental risk due to manure application.

PubMed

Flores, Héctor; Arumí, José Luis; Rivera, Diego; Lagos, L Octavio

2012-06-01

The management of swine manure is becoming an important environmental issue in Chile. One option for the final disposal of manure is to use it as a biofertilizer, but this practice could impact the surrounding environment. To assess the potential environmental impacts of the use of swine manure as a biofertilizer, we propose a method to identify zones of environmental risk through indices. The method considers two processes: nutrient runoff and solute leaching, and uses available information about soils, crops and management practices (irrigation, fertilization, and rotation). We applied the method to qualitatively assess the environmental risk associated with the use of swine manure as a biofertilizer in an 8,000-pig farm located in Central Chile. Results showed that the farm has a moderate environmental risk, but some specific locations have high environmental risks, especially those associated with impacts on areas surrounding water resources. This information could assist the definition of better farm-level management practices, as well as the preservation of riparian vegetation acting as buffer strips. The main advantage of our approach is that it combines qualitative and quantitative information, including particular situations or field features based on expert knowledge. The method is flexible, simple, and can be easily extended or adapted to other processes.

Resource management plan for the Oak Ridge Reservation. Volume 30, Oak Ridge National Environmental Research Park natural areas and reference areas--Oak Ridge Reservation environmentally sensitive sites containing special plants, animals, and communities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pounds, L.R.; Parr, P.D.; Ryon, M.G.

1993-08-01

Areas on the Oak Ridge Reservation (ORR) that contain rare plant or animal species or are special habitats are protected through National Environmental Research Park Natural Area (NA) or Reference Area (RA) designations. The US Department of Energy`s Oak Ridge National Environmental Research Park program is responsible for identifying species of vascular plants that are endangered, threatened, or rare and, as much as possible, for conserving those areas in which such species grow. This report includes a listing of Research Park NAs and RAs with general habitat descriptions and a computer-generated map with the areas identified. These are the locationsmore » of rare plant or animal species or special habitats that are known at this time. As the Reservation continues to be surveyed, it is expected that additional sites will be designated as Research Park NAs or RAs. This document is a component of a larger effort to identify environmentally sensitive areas on ORR. This report identifies the currently known locations of rare plant species, rare animal species, and special biological communities. Floodplains, wetlands (except those in RAs or NAs), and cultural resources are not included in this report.« less

Additive Manufactured Product Integrity

NASA Technical Reports Server (NTRS)

Waller, Jess; Wells, Doug; James, Steve; Nichols, Charles

2017-01-01

NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

Laser speckle contrast imaging identifies ischemic areas on gastric tube reconstructions following esophagectomy

PubMed Central

Milstein, Dan M.J.; Ince, Can; Gisbertz, Suzanne S.; Boateng, Kofi B.; Geerts, Bart F.; Hollmann, Markus W.; van Berge Henegouwen, Mark I.; Veelo, Denise P.

2016-01-01

Abstract Gastric tube reconstruction (GTR) is a high-risk surgical procedure with substantial perioperative morbidity. Compromised arterial blood supply and venous congestion are believed to be the main etiologic factors associated with early and late anastomotic complications. Identifying low blood perfusion areas may provide information on the risks of future anastomotic leakage and could be essential for improving surgical techniques. The aim of this study was to generate a method for gastric microvascular perfusion analysis using laser speckle contrast imaging (LSCI) and to test the hypothesis that LSCI is able to identify ischemic regions on GTRs. Patients requiring elective laparoscopy-assisted GTR participated in this single-center observational investigation. A method for intraoperative evaluation of blood perfusion and postoperative analysis was generated and validated for reproducibility. Laser speckle measurements were performed at 3 different time pointes, baseline (devascularized) stomach (T0), after GTR (T1), and GTR at 20° reverse Trendelenburg (T2). Blood perfusion analysis inter-rater reliability was high, with intraclass correlation coefficients for each time point approximating 1 (P < 0.0001). Baseline (T0) and GTR (T1) mean blood perfusion profiles were highest at the base of the stomach and then progressively declined towards significant ischemia at the most cranial point or anastomotic tip (P < 0.01). After GTR, a statistically significant improvement in mean blood perfusion was observed in the cranial gastric regions of interest (P < 0.05). A generalized significant decrease in mean blood perfusion was observed across all GTR regions of interest during 20° reverse Trendelenburg (P < 0.05). It was feasible to implement LSCI intraoperatively to produce blood perfusion assessments on intact and reconstructed whole stomachs. The analytical design presented in this study resulted in good reproducibility of gastric perfusion

Laser speckle contrast imaging identifies ischemic areas on gastric tube reconstructions following esophagectomy.

PubMed

Milstein, Dan M J; Ince, Can; Gisbertz, Suzanne S; Boateng, Kofi B; Geerts, Bart F; Hollmann, Markus W; van Berge Henegouwen, Mark I; Veelo, Denise P

2016-06-01

Gastric tube reconstruction (GTR) is a high-risk surgical procedure with substantial perioperative morbidity. Compromised arterial blood supply and venous congestion are believed to be the main etiologic factors associated with early and late anastomotic complications. Identifying low blood perfusion areas may provide information on the risks of future anastomotic leakage and could be essential for improving surgical techniques. The aim of this study was to generate a method for gastric microvascular perfusion analysis using laser speckle contrast imaging (LSCI) and to test the hypothesis that LSCI is able to identify ischemic regions on GTRs.Patients requiring elective laparoscopy-assisted GTR participated in this single-center observational investigation. A method for intraoperative evaluation of blood perfusion and postoperative analysis was generated and validated for reproducibility. Laser speckle measurements were performed at 3 different time pointes, baseline (devascularized) stomach (T0), after GTR (T1), and GTR at 20° reverse Trendelenburg (T2).Blood perfusion analysis inter-rater reliability was high, with intraclass correlation coefficients for each time point approximating 1 (P < 0.0001). Baseline (T0) and GTR (T1) mean blood perfusion profiles were highest at the base of the stomach and then progressively declined towards significant ischemia at the most cranial point or anastomotic tip (P < 0.01). After GTR, a statistically significant improvement in mean blood perfusion was observed in the cranial gastric regions of interest (P < 0.05). A generalized significant decrease in mean blood perfusion was observed across all GTR regions of interest during 20° reverse Trendelenburg (P < 0.05).It was feasible to implement LSCI intraoperatively to produce blood perfusion assessments on intact and reconstructed whole stomachs. The analytical design presented in this study resulted in good reproducibility of gastric perfusion measurements

Classification and analysis of the Rudaki's Area

NASA Astrophysics Data System (ADS)

Zambon, F.; De sanctis, M.; Capaccioni, F.; Filacchione, G.; Carli, C.; Ammannito, E.; Frigeri, A.

2011-12-01

During the first two MESSENGER flybys the Mercury Dual Imaging System (MDIS) has mapped 90% of the Mercury's surface. An effective way to study the different terrain on planetary surfaces is to apply classification methods. These are based on clustering algorithms and they can be divided in two categories: unsupervised and supervised. The unsupervised classifiers do not require the analyst feedback and the algorithm automatically organizes pixels values into classes. In the supervised method, instead, the analyst must choose the "training area" that define the pixels value of a given class. We applied an unsupervised classifier, ISODATA, to the WAC filter images of the Rudaki's area where several kind of terrain have been identified showing differences in albedo, topography and crater density. ISODATA classifier divides this region in four classes: 1) shadow regions, 2) rough regions, 3) smooth plane, 4) highest reflectance area. ISODATA can not distinguish the high albedo regions from highly reflective illuminated edge of the craters, however the algorithm identify four classes that can be considered different units mainly on the basis of their reflectances at the various wavelengths. Is not possible, instead, to extrapolate compositional information because of the absence of clear spectral features. An additional analysis was made using ISODATA to choose the "training area" for further supervised classifications. These approach would allow, for example, to separate more accurately the edge of the craters from the high reflectance areas and the low reflectance regions from the shadow areas.

Additional Research Needs to Support the GENII Biosphere Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Napier, Bruce A.; Snyder, Sandra F.; Arimescu, Carmen

In the course of evaluating the current parameter needs for the GENII Version 2 code (Snyder et al. 2013), areas of possible improvement for both the data and the underlying models have been identified. As the data review was implemented, PNNL staff identified areas where the models can be improved both to accommodate the locally significant pathways identified and also to incorporate newer models. The areas are general data needs for the existing models and improved formulations for the pathway models.

Identifying the Correlation between Professional Learning Communities and Collective Teacher Efficacy for Math Data Teams in Kaua'i Complex Area Secondary Schools

ERIC Educational Resources Information Center

Ellwood, Cheryl Kathryn

2013-01-01

Professional learning communities and teacher efficacy are at the core of many of the current educational reform models. The intention of this dissertation was to identify the correlation between professional learning communities and collective teacher efficacy for math data teams in the six Kaua'i Complex Area secondary schools, as measured by…

Bolder science needed now for protected areas.

PubMed

Watson, James E M; Darling, Emily S; Venter, Oscar; Maron, Martine; Walston, Joe; Possingham, Hugh P; Dudley, Nigel; Hockings, Marc; Barnes, Megan; Brooks, Thomas M

2016-04-01

Recognizing that protected areas (PAs) are essential for effective biodiversity conservation action, the Convention on Biological Diversity established ambitious PA targets as part of the 2020 Strategic Plan for Biodiversity. Under the strategic goal to "improve the status of biodiversity by safeguarding ecosystems, species, and genetic diversity," Target 11 aims to put 17% of terrestrial and 10% of marine regions under PA status by 2020. Additionally and crucially, these areas are required to be of particular importance for biodiversity and ecosystem services, effectively and equitably managed, ecologically representative, and well-connected and to include "other effective area-based conservation measures" (OECMs). Whereas the area-based targets are explicit and measurable, the lack of guidance for what constitutes important and representative; effective; and OECMs is affecting how nations are implementing the target. There is a real risk that Target 11 may be achieved in terms of area while failing the overall strategic goal for which it is established because the areas are poorly located, inadequately managed, or based on unjustifiable inclusion of OECMs. We argue that the conservation science community can help establish ecologically sensible PA targets to help prioritize important biodiversity areas and achieve ecological representation; identify clear, comparable performance metrics of ecological effectiveness so progress toward these targets can be assessed; and identify metrics and report on the contribution OECMs make toward the target. By providing ecologically sensible targets and new performance metrics for measuring the effectiveness of both PAs and OECMs, the science community can actively ensure that the achievement of the required area in Target 11 is not simply an end in itself but generates genuine benefits for biodiversity. © 2016 Society for Conservation Biology.

Kinematical simulation of robotic complex operation for implementing full-scale additive technologies of high-end materials, composites, structures, and buildings

NASA Astrophysics Data System (ADS)

Antsiferov, S. I.; Eltsov, M. Iu; Khakhalev, P. A.

2018-03-01

This paper considers a newly designed electronic digital model of a robotic complex for implementing full-scale additive technologies, funded under a Federal Target Program. The electronic and digital model was used to solve the problem of simulating the movement of a robotic complex using the NX CAD/CAM/CAE system. The virtual mechanism was built and the main assemblies, joints, and drives were identified as part of solving the problem. In addition, the maximum allowed printable area size was identified for the robotic complex, and a simulation of printing a rectangular-shaped article was carried out.

A methodological approach to identify agro-biodiversity hotspots for priority in situ conservation of plant genetic resources

PubMed Central

Pacicco, Luca; Bodesmo, Mara; Torricelli, Renzo

2018-01-01

Agro-biodiversity is seriously threatened worldwide and strategies to preserve it are dramatically required. We propose here a methodological approach aimed to identify areas with a high level of agro-biodiversity in which to set or enhance in situ conservation of plant genetic resources. These areas are identified using three criteria: Presence of Landrace diversity, Presence of wild species and Agro-ecosystem ecological diversity. A Restrictive and an Additive prioritization strategy has been applied on the entire Italian territory and has resulted in establishing nationwide 53 and 197 agro-biodiversity hotspots respectively. At present the strategies can easily be applied at a European level and can be helpful to develop conservation strategies everywhere. PMID:29856765

Using a partial sum method and GPS tracking data to identify area restricted search by artisanal fishers at moored fish aggregating devices in the Commonwealth of Dominica.

PubMed

Alvard, Michael; Carlson, David; McGaffey, Ethan

2015-01-01

Foragers must often travel from a central place to exploit aggregations of prey. These patches can be identified behaviorally when a forager shifts from travel to area restricted search, identified by a decrease in speed and an increase in sinuosity of movement. Faster, more directed movement is associated with travel. Differentiating foraging behavior at patches from travel to patches is important for a variety of research questions and has now been made easier by the advent of small, GPS devices that can track forager movement with high resolution. In the summer and fall of 2012, movement data were collected from GPS devices placed on foraging trips originating in the artisanal fishing village of Desa Ikan (pseudonym), on the east coast of the Caribbean island nation of the Commonwealth Dominica. Moored FADs are human-made structures anchored to the ocean floor with fish attraction material on or near the surface designed to effectively create a resource patch. The ultimate goal of the research is to understand how property rights are emerging after the introduction of fish aggregating device (FAD) technology at the site in 1999. This paper reports on research to identify area-restricted search foraging behavior at FAD patches. For 22 foraging trips simultaneous behavioral observations were made to ground-truth the GPS movement data. Using a cumulative sum method, area restricted search was identified as negative deviations from the mean travel speed and the method was able to correctly identify FAD patches in every case.

Water-resources data network evaluation for Monterey County, California; Phase 2, northern and coastal areas of Monterey County

USGS Publications Warehouse

Templin, W.E.; Smith, P.E.; DeBortoli, M.L.; Schluter, R.C.

1995-01-01

This report presents an evaluation of water- resources data-collection networks in the northern and coastal areas of Monterey County, California. This evaluation was done by the U.S. Geological Survey in cooperation with the Monterey County Flood Control and Water Conservation District to evaluate precipitation, surface water, and ground water monitoring networks. This report describes existing monitoring networks in the study areas and areas where possible additional data-collection is needed. During this study, 106 precipitation-quantity gages were identified, of which 84 were active; however, no precipitation-quality gages were identified in the study areas. The precipitaion-quantity gages were concentrated in the Monterey Peninsula and the northern part of the county. If the number of gages in these areas were reduced, coverage would still be adequate to meet most objectives; however, additional gages could improve coverage in the Tularcitos Creek basin and in the coastal areas south of Carmel to the county boundary. If collection of precipitation data were expanded to include monitoring precipitation quality, this expanded monitoring also could include monitoring precipitation for acid rain and pesticides. Eleven continuous streamflow-gaging stations were identified during this study, of which seven were active. To meet the objectives of the streamflow networks outlined in this report, the seven active stations would need to be continued, four stations would need to be reactivated, and an additional six streamflow-gaging stations would need to be added. Eleven stations that routinely were sampled for chemical constituents were identified in the study areas. Surface water in the lower Big Sur River basin was sampled annually for total coli- form and fecal coliform bacteria, and the Big Sur River was sampled monthly at 16 stations for these bacteria. Routine sampling for chemical constituents also was done in the Big Sur River basin. The Monterey County Flood

Wetland survey of selected areas in the K-24 Site Area of responsibility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosensteel, B.A.; Awl, D.J.

1995-07-01

In accordance with DOE Regulations for Compliance with Floodplain/Wetlands Environmental Review Requirements, wetland surveys were conducted in selected areas within the K-25 Area of Responsibility during the summer of 1994. These areas are Mitchell Branch, Poplar Creek, the K-770 OU, Duct Island Peninsula, the Powerhouse area, and the K-25 South Corner. Previously surveyed areas included in this report are the main plant area of the K-25 Site, the K-901 OU, the AVLIS site, and the K-25 South Site. Wetland determinations were based on the USACE methodology. Forty-four separate wetland areas, ranging in size from 0.13 to 4.23 ha, were identified.more » Wetlands were identified in all of the areas surveyed with the exception of the interior of the Duct Island Peninsula and the main plant area of the K-25 Site. Wetlands perform functions such as floodflow alteration, sediment stabilization, sediment and toxicant retention, nutrient transformation, production export, and support of aquatic species and wildlife diversity and abundance. The forested, scrub-shrub, and emergent wetlands identified in the K-25 area perform some or all of these functions to varying degrees.« less

GTA: a game theoretic approach to identifying cancer subnetwork markers.

PubMed

Farahmand, S; Goliaei, S; Ansari-Pour, N; Razaghi-Moghadam, Z

2016-03-01

The identification of genetic markers (e.g. genes, pathways and subnetworks) for cancer has been one of the most challenging research areas in recent years. A subset of these studies attempt to analyze genome-wide expression profiles to identify markers with high reliability and reusability across independent whole-transcriptome microarray datasets. Therefore, the functional relationships of genes are integrated with their expression data. However, for a more accurate representation of the functional relationships among genes, utilization of the protein-protein interaction network (PPIN) seems to be necessary. Herein, a novel game theoretic approach (GTA) is proposed for the identification of cancer subnetwork markers by integrating genome-wide expression profiles and PPIN. The GTA method was applied to three distinct whole-transcriptome breast cancer datasets to identify the subnetwork markers associated with metastasis. To evaluate the performance of our approach, the identified subnetwork markers were compared with gene-based, pathway-based and network-based markers. We show that GTA is not only capable of identifying robust metastatic markers, it also provides a higher classification performance. In addition, based on these GTA-based subnetworks, we identified a new bonafide candidate gene for breast cancer susceptibility.

Airborne Quercus pollen in SW Spain: Identifying favourable conditions for atmospheric transport and potential source areas.

PubMed

Maya-Manzano, José María; Fernández-Rodríguez, Santiago; Smith, Matt; Tormo-Molina, Rafael; Reynolds, Andrew M; Silva-Palacios, Inmaculada; Gonzalo-Garijo, Ángela; Sadyś, Magdalena

2016-11-15

The pollen grains of Quercus spp. (oak trees) are allergenic. This study investigates airborne Quercus pollen in SW Spain with the aim identifying favourable conditions for atmospheric transport and potential sources areas. Two types of Quercus distribution maps were produced. Airborne Quercus pollen concentrations were measured at three sites located in the Extremadura region (SW Spain) for 3 consecutive years. The seasonal occurrence of Quercus pollen in the air was investigated, as well as days with pollen concentrations ≥80Pm(-3). The distance that Quercus pollen can be transported in appreciable numbers was calculated using clusters of back trajectories representing the air mass movement above the source areas (oak woodlands), and by using a state-of-the-art dispersion model. The two main potential sources of Quercus airborne pollen captured in SW Spain are Q. ilex subsp. ballota and Q. suber. The minimum distances between aerobiological stations and Quercus woodlands have been estimated as: 40km (Plasencia), 66km (Don Benito), 62km (Zafra) from the context of this study. Daily mean Quercus pollen concentration can exceed 1,700Pm(-3), levels reached not less than 24 days in a single year. High Quercus pollen concentration were mostly associated with moderate wind speed events (6-10ms(-1)), whereas that a high wind speed (16-20ms(-1)) seems to be associated with low concentrations. Copyright © 2016 Elsevier B.V. All rights reserved.

Can Australians identify snakes?

PubMed

Morrison, J J; Pearn, J H; Covacevich, J; Nixon, J

1983-07-23

A study of the ability of Australians to identify snakes was undertaken, in which 558 volunteers (primary and secondary schoolchildren, doctors and university science and medical students) took part. Over all, subjects correctly identified an average of 19% of snakes; 28% of subjects could identify a taipan, 59% could identify a death adder, 18% a tiger snake, 23% an eastern (or common) brown snake, and 0.5% a rough-scaled snake. Eighty-six per cent of subjects who grew up in rural areas could identify a death adder; only 4% of those who grew up in an Australian capital city could identify a nonvenomous python. Male subjects identified snakes more accurately than did female subjects. Doctors and medical students correctly identified an average of 25% of snakes. The ability to identify medically significant Australian snakes was classified according to the observer's background, education, sex, and according to the individual snake species. Australians need to be better educated about snakes indigenous to this country.

Small area clustering of under-five children's mortality and associated factors using geo-additive Bayesian discrete-time survival model in Kersa HDSS, Ethiopia.

PubMed

Dedefo, Melkamu; Oljira, Lemessa; Assefa, Nega

2016-02-01

Child mortality reflects a country's level of socio-economic development and quality of life. In Ethiopia, limited studies were conducted on under-five mortality and almost none of them tried to identify the spatial effect on mortality. Thus, this study explored the small area clustering of under-five mortality and associated factors in Kersa HDSS, Eastern Ethiopia. The study population included all children under the age of five years during the time September, 2008-august 31, 2012 which are registered in Kersa Health and Demographic Surveillance System (Kersa HDSS). A flexible Bayesian geo-additive discrete-time survival mixed model was used. Some of the factors that are significantly associated with under-five mortality, with posterior odds ratio and 95% credible intervals, are maternal educational status 1.31(1.13,-1.49), place of delivery 1.016(1.013-1.12), no of live birth at a delivery 0.35(0.23,1.83), low household wealth index 1.26(1.10 1.43) middle level household wealth index 0.95 (0.84 1.07) pre-term duration of pregnancy 1.95(1.27,2.91), post-term duration of pregnancy 0.74(0.60,0.93) and antenatal visit 1.19(1.06, 1.35). Variation was noted in the risk of under-five mortality by the selected small administrative regions (kebeles). This study reveals geographic patterns in rates of under-five mortality in those selected small administrative regions and shows some important determinants of under-five mortality. More importantly, we observed clustering of under-five mortality, which indicates the importance of spatial effects and presentation of this clustering through maps that facilitates visuality and highlights differentials across geographical areas that would, otherwise, be overlooked in traditional data-analytic methods. Copyright © 2015 Elsevier Ltd. All rights reserved.

Identifying the public's knowledge and intention to use human cloning in Greek urban areas.

PubMed

Tzamalouka, Georgia; Soultatou, Pelagia; Papadakaki, Maria; Chatzifotiou, Sevasti; Tarlatzis, Basil; El Chliaoutakis, Joannes

2005-02-01

The understanding of the public's knowledge on human cloning (HC) and its acceptability are considered important for the development of evidence-based policy making. The aim of this research study was to investigate the demographic and socioeconomic variables that affect the public's knowledge and intention to use HC in urban areas of Greece. Additionally, the possible association of religiousness with the knowledge and the intention to use HC were also investigated. Individual interviews were conducted with 1020 men and women of urban areas in Greece. Stratified random sampling was performed to select the respondents. Several scientists, experts in HC, evaluated the content of the instrument initially developed. The final questionnaire was consequently the result of a pilot study. Almost half of the respondents (51.5%) believed that "HC is a sort of in vitro fertilization" and 42.9% that "it has already been applied to human being." They were not aware that "the cloned fetus grows in the woman's uterus" (41.5%) and that "HC could regenerate human organs" (41.7%). The acceptability of human cloning for the cure of terminal diseases and transplantation need is very high (70.7% and 58.6%, respectively). The public's intention to have recourse to cloning on the grounds of "bringing" back to life a loved person or because of reproductive disorders was reported as desire by 35% and 32.5%, respectively. The occupational category (scientists, self-employed, and artists), the Intention to use HC, and the number of children are highly significant predictors of valid knowledge about HC. Low rates of church attendance appeared to relate with high reported Intention to use HC, and increasing scores of valid knowledge about HC increased the public's Intention to use HC. A number of specific demographic and socioeconomic characteristics and high scores of knowledge provide a persuasive justification in demonstrating intention toward HC. The current study suggests that these

The Support of MPA (Marine Protected Area) in Coral Triangle Area: Evidence from Kei Islands, Indonesia

NASA Astrophysics Data System (ADS)

Hamid, Syahibul K.; Teniwut, Wellem A.; Teniwut, Roberto M. K.; Rahantoknam, Meyske A.; Hasyim, Cawalinya L.; Hungan, Marselus

2017-10-01

Kei Islands located inside the coral triangle. Therefore, the biodiversity level on the sea in this area is considered high. United nation has proposed for water that included in the coral triangle has to apply marine protected area (MPA) to preserve the area. The main problem is most of the community especially in Kei Islands have depended on the sea as their sources of the economy even fisheries commodity like fish play a large part on the inflation rate and other prosperity indicators likes school and housing. Also, Kei Islands practice on form local wisdom for owning areal of the sea which calls “petuanan laut” by certain of villages or group of villages in one area. This study aimed to map the cluster of catching fisheries area based on the quantity of fish supply on a local market in Kei Islands and measure each cluster on their support and perspective on Marine Protected Area (MPA). We conducted a focus group discussion and collecting additional data by questionnaires with descriptive and quantitative analysis with logistic regression. The implication of this study can provide a clear view of coastal communities view on MPA program also to identify an area that has marine resources, human resources, and equipment to provide government an empirical view on catching fisheries in Kei Islands to issued better policy to develop fishing industry in Kei Islands.

Long-term plasticity in identified hippocampal GABAergic interneurons in the CA1 area in vivo.

PubMed

Lau, Petrina Yau-Pok; Katona, Linda; Saghy, Peter; Newton, Kathryn; Somogyi, Peter; Lamsa, Karri P

2017-05-01

Long-term plasticity is well documented in synapses between glutamatergic principal cells in the cortex both in vitro and in vivo. Long-term potentiation (LTP) and -depression (LTD) have also been reported in glutamatergic connections to hippocampal GABAergic interneurons expressing parvalbumin (PV+) or nitric oxide synthase (NOS+) in brain slices, but plasticity in these cells has not been tested in vivo. We investigated synaptically-evoked suprathreshold excitation of identified hippocampal neurons in the CA1 area of urethane-anaesthetized rats. Neurons were recorded extracellularly with glass microelectrodes, and labelled with neurobiotin for anatomical analyses. Single-shock electrical stimulation of afferents from the contralateral CA1 elicited postsynaptic action potentials with monosynaptic features showing short delay (9.95 ± 0.41 ms) and small jitter in 13 neurons through the commissural pathway. Theta-burst stimulation (TBS) generated LTP of the synaptically-evoked spike probability in pyramidal cells, and in a bistratified cell and two unidentified fast-spiking interneurons. On the contrary, PV+ basket cells and NOS+ ivy cells exhibited either LTD or LTP. An identified axo-axonic cell failed to show long-term change in its response to stimulation. Discharge of the cells did not explain whether LTP or LTD was generated. For the fast-spiking interneurons, as a group, no correlation was found between plasticity and local field potential oscillations (1-3 or 3-6 Hz components) recorded immediately prior to TBS. The results demonstrate activity-induced long-term plasticity in synaptic excitation of hippocampal PV+ and NOS+ interneurons in vivo. Physiological and pathological activity patterns in vivo may generate similar plasticity in these interneurons.

Estimating Demand for and Supply of Pediatric Preventive Dental Care for Children and Identifying Dental Care Shortage Areas, Georgia, 2015.

PubMed

Cao, Shanshan; Gentili, Monica; Griffin, Paul M; Griffin, Susan O; Harati, Pravara; Johnson, Ben; Serban, Nicoleta; Tomar, Scott

Demand for dental care is expected to outpace supply through 2025. The objectives of this study were to determine the extent of pediatric dental care shortages in Georgia and to develop a general method for estimation that can be applied to other states. We estimated supply and demand for pediatric preventive dental care for the 159 counties in Georgia in 2015. We compared pediatric preventive dental care shortage areas (where demand exceeded twice the supply) designated by our methods with dental health professional shortage areas designated by the Health Resources & Services Administration. We estimated caries risk from a multivariate analysis of National Health and Nutrition Examination Survey data and national census data. We estimated county-level demand based on the time needed to perform preventive dental care services and the proportion of time that dentists spend on pediatric preventive dental care services from the Medical Expenditure Panel Survey. Pediatric preventive dental care supply exceeded demand in Georgia in 75 counties: the average annual county-level pediatric preventive dental care demand was 16 866 hours, and the supply was 32 969 hours. We identified 41 counties as pediatric dental care shortage areas, 14 of which had not been designated by the Health Resources & Services Administration. Age- and service-specific information on dental care shortage areas could result in more efficient provider staffing and geographic targeting.

Identifying outdoor thermal risk areas and evaluation of future thermal comfort concerning shading orientation in a traditional settlement.

PubMed

Huang, Kuo-Tsang; Yang, Shing-Ru; Matzarakis, Andreas; Lin, Tzu-Ping

2018-06-01

The outdoor thermal environment is expected to be deteriorated under climate change. An approach of risk identification including assessment from aspects of thermal stress effect, people's exposure, and local's vulnerability were adopted to study a hot-and-humid traditional rural community located at Tainan, Taiwan. Layers of each aspect were either constructed by in-situ measurements or simulations. To evaluate the future thermal comfort changes by simulations, the prerequisite hourly climate data of three future time slices were produced. Prognostic simulation model, ENVI-met, in combination with diagnostic model, RayMan, were respectively used for identifying current spatial distribution of thermal stress and for assessing the future thermal comfort changes. High thermal risk area was identified by superimposing layers of hazard, exposure and vulnerability. It revealed that because of the tourists' vulnerability to adapt local climate and the inflexibleness of choosing visiting time, it exhibited a high thermal stress at the Main Courtyard where its thermal comfort conditions will be deteriorated due to climate change. Furthermore, the thermal comfort conditions in various shading orientation were analyzed based on the changing climate in three future time slices, i.e. 2011-2040, 2041-2070, and 2071-2100. The results show the area with shading in the East and West side is more comfort than in the North side. In hot season, shading in the West side contributes less PET increasing, especially in the afternoon period. The severest overheat problem (the physiological equivalent temperature, PET>40°C) at the Main Courtyard will increase from current 10% to 28% in 2071-2100 in terms of overheating occurrence frequency. The results of this study can be used as the guidelines for environment analysis before planning or redesign community. Copyright © 2018 Elsevier B.V. All rights reserved.

41 CFR 102-83.30 - In addition to its mission and program requirements, are there any other issues that Federal...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false In addition to its... identifying the delineated area? 102-83.30 Section 102-83.30 Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION REAL PROPERTY 83-LOCATION...

Spatial distribution of child pedestrian injuries along census tract boundaries: Implications for identifying area-based correlates.

PubMed

Curtis, Jacqueline W

2017-01-01

Census tracts are often used to investigate area-based correlates of a variety of health outcomes. This approach has been shown to be valuable in understanding the ways that health is shaped by place and to design appropriate interventions that account for community-level processes. Following this line of inquiry, it is common in the study of pedestrian injuries to aggregate the point level locations of these injuries to the census tracts in which they occur. Such aggregation enables investigation of the relationships between a range of socioeconomic variables and areas of notably high or low incidence. This study reports on the spatial distribution of child pedestrian injuries in a mid-sized U.S. city over a three-year period. Utilizing a combination of geospatial approaches, Near Analysis, Kernel Density Estimation, and Local Moran's I, enables identification, visualization, and quantification of close proximity between incidents and tract boundaries. Specifically, results reveal that nearly half of the 100 incidents occur within roads that are also census tract boundaries. Results also uncover incidents that occur on tract boundaries, not merely near them. This geographic pattern raises the question of the utility of associating area-based census data from any one tract to the injuries occurring in these border zones. Furthermore, using a standard spatial join technique in a Geographic Information System (GIS), these points located on the border are counted as falling into census tracts on both sides of the boundary, which introduces uncertainty in any subsequent analysis. Therefore, two additional approaches of aggregating points to polygons were tested in this study. Results differ with each approach, but without any alert of such differences to the GIS user. This finding raises a fundamental concern about techniques through which points are aggregated to polygons in any study using point level incidents and their surrounding census tract socioeconomic data to

First steps for mitigating bycatch of Pink-footed Shearwaters Ardenna creatopus: Identifying overlap of foraging areas and fisheries in Chile

USGS Publications Warehouse

Carle, Ryan; Felis, Jonathan J.; López, Verónica; Adams, Josh; Hodum, Peter; Beck, Jessie; Colodro, Valentina; Vega, Rodrigo; González, Andrés

2016-01-01

The Pink-footed Shearwater, Ardenna creatopus, is listed as in danger of extinction by Chile and under Annex 1 of ACAP, with an estimated global population of approximately 56,000 individuals. Incidental bycatch of this species in fisheries is thought to be an important cause in population decline (i.e. annual estimated mortality of >1000 adults). This species is an endemic breeder in Chile, nesting only on the Juan Fernandez Archipelago (JFI; 30% of global population), and Isla Mocha (70% of global population). Using miniature GPS and satellite transmitters, we determined foraging areas of Pink-footed Shearwaters during the chick-rearing period in 2002 (JFI) and 2015-2016 (Isla Mocha). We overlaid shearwater tracking data with data from the Instituto de Fomento Pesquero (IFOP) on fishing effort in Chile (type of fishery, number sets per day, location of sets, and target species) to identify fisheries and fishing zones with the greatest potential for Pink-footed Shearwater bycatch. During the 2002-2006 (N = 28 birds total) and 2015 (N = 18 birds) breeding periods, foraging areas were associated with the continental shelf and shelf-break, generally less than 30 km offshore. All foraging trips occurred between 31.5 and 40.0 degrees south, and birds remained in Chile territorial waters 100% of the time. We identified two primary foraging hotspots, one offshore near Talcahuano, Chile (approximately 36-37.5° south), and one offshore north of Valdivia, Chile (approximately 39-39.5° south). Birds tracked from the Juan Fernández Archipelago foraged in the Talcahuano hotspot but did not visit the southerly hotspot near Valdivia. Birds tracked from Isla Mocha used both areas, with a greater proportion of birds using the Valdivia hotspot than the Talcahuano hotspot. Other major areas of use were around the respective breeding colonies from which the birds were tracked. Overlay of these data with fisheries data is currently in progress. Preliminary results indicate

Using a Partial Sum Method and GPS Tracking Data to Identify Area Restricted Search by Artisanal Fishers at Moored Fish Aggregating Devices in the Commonwealth of Dominica

PubMed Central

Alvard, Michael; Carlson, David; McGaffey, Ethan

2015-01-01

Foragers must often travel from a central place to exploit aggregations of prey. These patches can be identified behaviorally when a forager shifts from travel to area restricted search, identified by a decrease in speed and an increase in sinuosity of movement. Faster, more directed movement is associated with travel. Differentiating foraging behavior at patches from travel to patches is important for a variety of research questions and has now been made easier by the advent of small, GPS devices that can track forager movement with high resolution. In the summer and fall of 2012, movement data were collected from GPS devices placed on foraging trips originating in the artisanal fishing village of Desa Ikan (pseudonym), on the east coast of the Caribbean island nation of the Commonwealth Dominica. Moored FADs are human-made structures anchored to the ocean floor with fish attraction material on or near the surface designed to effectively create a resource patch. The ultimate goal of the research is to understand how property rights are emerging after the introduction of fish aggregating device (FAD) technology at the site in 1999. This paper reports on research to identify area-restricted search foraging behavior at FAD patches. For 22 foraging trips simultaneous behavioral observations were made to ground-truth the GPS movement data. Using a cumulative sum method, area restricted search was identified as negative deviations from the mean travel speed and the method was able to correctly identify FAD patches in every case. PMID:25647288

77 FR 31068 - Additional Identifying Information Associated With Persons Whose Property and Interests in...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-24

... Directorate (individual) [SYRIA] [HRIT- SY] Entities DATAK TELECOM, No. 14, Enbe E Yamin Street, North...), Syria [SYRIA] [HRIT-SY] SYRIATEL (a.k.a. SYRIATEL MOBILE; a.k.a. SYRIATEL MOBILE TELECOM; a.k.a. SYRIATEL MOBILE TELECOM SA), Doctors Syndicate Building, Al Jalaa Street, Abu Roumaneh Area, PO Box 2900...

Alkyl Pyrocarbonate Electrolyte Additives for Performance Enhancement of Li Ion Cells

NASA Technical Reports Server (NTRS)

Smart, M. C.; Ratnakumar, B. V.; Surampudi, S.

2000-01-01

Lithium ion rechargeable batteries are being developed for various aerospace applications under a NASA-DoD Interagency program. These applications require further improvements in several areas, specifically in the cycle life for LEO and GEO satellites and in the low temperature performance for the Mars Lander and Rover missions. Accordingly, we have been pursuing research studies to achieve improvement in the low temperature performance, long cycle life and active life of Li ion cells. The studies are mainly focused on electrolytes, to identify newer formulations of new electrolyte additives to enhance Li permeability (at low temperatures) and stability towards the electrode. The latter approach is particularly aimed at the formation suitable SEI (solid electrolyte interphase) on carbon electrodes. In this paper, we report the beneficial effect of using alkyl pyrocarbonates as electrolyte additives to improve the low temperature performance of Li ion cells.

Identifying grain-size dependent errors on global forest area estimates and carbon studies

Treesearch

Daolan Zheng; Linda S. Heath; Mark J. Ducey

2008-01-01

Satellite-derived coarse-resolution data are typically used for conducting global analyses. But the forest areas estimated from coarse-resolution maps (e.g., 1 km) inevitably differ from a corresponding fine-resolution map (such as a 30-m map) that would be closer to ground truth. A better understanding of changes in grain size on area estimation will improve our...

A Predictive Model Has Identified Tick-Borne Encephalitis High-Risk Areas in Regions Where No Cases Were Reported Previously, Poland, 1999-2012.

PubMed

Stefanoff, Pawel; Rubikowska, Barbara; Bratkowski, Jakub; Ustrnul, Zbigniew; Vanwambeke, Sophie O; Rosinska, Magdalena

2018-04-04

During 1999–2012, 77% of the cases of tick-borne encephalitis (TBE) were recorded in two out of 16 Polish provinces. However, historical data, mostly from national serosurveys, suggest that the disease could be undetected in many areas. The aim of this study was to identify which routinely-measured meteorological, environmental, and socio-economic factors are associated to TBE human risk across Poland, with a particular focus on areas reporting few cases, but where serosurveys suggest higher incidence. We fitted a zero-inflated Poisson model using data on TBE incidence recorded in 108 NUTS-5 administrative units in high-risk areas over the period 1999–2012. Subsequently we applied the best fitting model to all Polish municipalities. Keeping the remaining variables constant, the predicted rate increased with the increase of air temperature over the previous 10–20 days, precipitation over the previous 20–30 days, in forestation, forest edge density, forest road density, and unemployment. The predicted rate decreased with increasing distance from forests. The map of predicted rates was consistent with the established risk areas. It predicted, however, high rates in provinces considered TBE-free. We recommend raising awareness among physicians working in the predicted high-risk areas and considering routine use of household animal surveys for risk mapping.

Urban Forest Health: Identifying Issues and Needs within the Northeastern Area

Treesearch

USDA Forest Service

1998-01-01

Street trees and forested areas in cities, towns and communities are more than amenities. Besides beauty, trees provide many practical benefits such as shade from summer sun, protection from winter wind, habitat for wildlife, reduced water, air and noise pollution, increased property values, and revitalized tourism and local business trade. But perhaps the greatest...

Temperature diagnostic to identify high risk areas and optimize Legionella pneumophila surveillance in hot water distribution systems.

PubMed

Bédard, Emilie; Fey, Stéphanie; Charron, Dominique; Lalancette, Cindy; Cantin, Philippe; Dolcé, Patrick; Laferrière, Céline; Déziel, Eric; Prévost, Michèle

2015-03-15

Legionella pneumophila is frequently detected in hot water distribution systems and thermal control is a common measure implemented by health care facilities. A risk assessment based on water temperature profiling and temperature distribution within the network is proposed, to guide effective monitoring strategies and allow the identification of high risk areas. Temperature and heat loss at control points (water heater, recirculation, representative points-of-use) were monitored in various sections of five health care facilities hot water distribution systems and results used to develop a temperature-based risk assessment tool. Detailed investigations show that defective return valves in faucets can cause widespread temperature losses because of hot and cold water mixing. Systems in which water temperature coming out of the water heaters was kept consistently above 60 °C and maintained above 55 °C across the network were negative for Legionella by culture or qPCR. For systems not meeting these temperature criteria, risk areas for L. pneumophila were identified using temperature profiling and system's characterization; higher risk was confirmed by more frequent microbiological detection by culture and qPCR. Results confirmed that maintaining sufficiently high temperatures within hot water distribution systems suppressed L. pneumophila culturability. However, the risk remains as shown by the persistence of L. pneumophila by qPCR. Copyright © 2015 Elsevier Ltd. All rights reserved.

[The application of cortical and subcortical stimulation threshold in identifying the motor pathway and guiding the resection of gliomas in the functional areas].

PubMed

Ren, X H; Yang, X C; Huang, W; Yang, K Y; Liu, L; Qiao, H; Guo, L J; Cui, Y; Lin, S

2018-03-06

Objective: This study aimed to analyze the application of cortical and subcortical stimulation threshold in identifying the motor pathway and guiding the resection of gliomas in the functional area, and to illustrate the minimal safe threshold by ROC method. Methods: Fifty-seven patients with gliomas in the functional areas were enrolled in the study at Beijing Tiantan Hospital from 2015 to 2017. Anesthesia was maintained intravenously with propofol 10% and remifentanil. Throughout the resection process, cortical or subcortical stimulation threshold was determined along tumor border using monopolar or bipolar electrodes. The motor pathway was identified and protected from resection according to the stimulation threshold and transcranial MEPs. Minimal threshold in each case was recorded. Results: Total resection was achieved in 32 cases(56.1%), sub-total resection in 22 cases(38.6%), and partial resection in 3 cases(5.3%). Pre-operative motor disability was found in 9 cases. Compared with pre-operative motor scores, 19 exhibited impaired motor functions on day 1 after surgery, 5 had quick recovery by day 7 after surgery, and 7 had late recovery by 3 months after surgery. At 3 months, 7 still had impaired motor function. The frequency of intraoperative seizure was 1.8%(1/57). No other side effect was found during electronic monitoring in the operation. The ROC curve revealed that the minimal safe monopolar subcortical threshold was 5.70 mA for strength deterioration on day 1 and day 7 after surgery. Univariate analysis revealed that decreased transcranial MEPs and minimal subcortical threshold ≤5.7 mA were correlated with postoperative strength deterioration. Conclusions: Cortical and subcortical stimulation threshold has its merit in identifying the motor pathway and guiding the resection for tumors within the functional areas. 5.7 mA can be used as the minimal safe threshold to protect the motor pathway from injury.

Wheat cultivation: Identifying and estimating area by means of LANDSAT data

NASA Technical Reports Server (NTRS)

Dejesusparada, N. (Principal Investigator); Mendonca, F. J.; Cottrell, D. A.; Tardin, A. T.; Lee, D. C. L.; Shimabukuro, Y. E.; Moreira, M. A.; Delima, A. M.; Maia, F. C. S.

1981-01-01

Automatic classification of LANDSAT data supported by aerial photography for identification and estimation of wheat growing areas was evaluated. Data covering three regions in the State of Rio Grande do Sul, Brazil were analyzed. The average correct classification of IMAGE-100 data was 51.02% and 63.30%, respectively, for the periods of July and of September/October, 1979.

Identifying and quantifying urban recharge: a review

NASA Astrophysics Data System (ADS)

Lerner, David N.

2002-02-01

The sources of and pathways for groundwater recharge in urban areas are more numerous and complex than in rural environments. Buildings, roads, and other surface infrastructure combine with man-made drainage networks to change the pathways for precipitation. Some direct recharge is lost, but additional recharge can occur from storm drainage systems. Large amounts of water are imported into most cities for supply, distributed through underground pipes, and collected again in sewers or septic tanks. The leaks from these pipe networks often provide substantial recharge. Sources of recharge in urban areas are identified through piezometry, chemical signatures, and water balances. All three approaches have problems. Recharge is quantified either by individual components (direct recharge, water-mains leakage, septic tanks, etc.) or holistically. Working with individual components requires large amounts of data, much of which is uncertain and is likely to lead to large uncertainties in the final result. Recommended holistic approaches include the use of groundwater modelling and solute balances, where various types of data are integrated. Urban recharge remains an under-researched topic, with few high-quality case studies reported in the literature.

All Conservation Opportunity Areas (ECO.RES.ALL_OP_AREAS)

EPA Pesticide Factsheets

The All_OP_Areas GIS layer are all the Conservation Opportunity Areas identified by MoRAP (produced for EPA Region 7). They designate areas with potential for forest, grassland and forest/grassland mosaic conservation. These are areas of natural or semi-natural forest land cover that are at least 75 meters away from roads and away from patch edges. OAs were modeled by creating distance grids using the National Land Cover Database and the Census Bureau's TIGER roads files.

Functional Semi-Blind Source Separation Identifies Primary Motor Area Without Active Motor Execution.

PubMed

Porcaro, Camillo; Cottone, Carlo; Cancelli, Andrea; Salustri, Carlo; Tecchio, Franca

2018-04-01

High time resolution techniques are crucial for investigating the brain in action. Here, we propose a method to identify a section of the upper-limb motor area representation (FS_M1) by means of electroencephalographic (EEG) signals recorded during a completely passive condition (FS_M1bySS). We delivered a galvanic stimulation to the median nerve and we applied to EEG the semi-Blind Source Separation (s-BSS) algorithm named Functional Source Separation (FSS). In order to prove that FS_M1bySS is part of FS_M1, we also collected EEG in a motor condition, i.e. during a voluntary movement task (isometric handgrip) and in a rest condition, i.e. at rest with eyes open and closed. In motor condition, we show that the cortico-muscular coherence (CMC) of FS_M1bySS does not differ from FS_ M1 CMC (0.04 for both sources). Moreover, we show that the FS_M1bySS's ongoing whole band activity during Motor and both rest conditions displays high mutual information and time correlation with FS_M1 (above 0.900 and 0.800, respectively) whereas much smaller ones with the primary somatosensory cortex [Formula: see text] (about 0.300 and 0.500, [Formula: see text]). FS_M1bySS as a marker of the upper-limb FS_M1 representation obtainable without the execution of an active motor task is a great achievement of the FSS algorithm, relevant in most experimental, neurological and psychiatric protocols.

Statistical methods for identifying and bounding a UXO target area or minefield

DOE Office of Scientific and Technical Information (OSTI.GOV)

McKinstry, Craig A.; Pulsipher, Brent A.; Gilbert, Richard O.

2003-09-18

The sampling unit for minefield or UXO area characterization is typically represented by a geographical block or transect swath that lends itself to characterization by geophysical instrumentation such as mobile sensor arrays. New spatially based statistical survey methods and tools, more appropriate for these unique sampling units have been developed and implemented at PNNL (Visual Sample Plan software, ver. 2.0) with support from the US Department of Defense. Though originally developed to support UXO detection and removal efforts, these tools may also be used in current form or adapted to support demining efforts and aid in the development of newmore » sensors and detection technologies by explicitly incorporating both sampling and detection error in performance assessments. These tools may be used to (1) determine transect designs for detecting and bounding target areas of critical size, shape, and density of detectable items of interest with a specified confidence probability, (2) evaluate the probability that target areas of a specified size, shape and density have not been missed by a systematic or meandering transect survey, and (3) support post-removal verification by calculating the number of transects required to achieve a specified confidence probability that no UXO or mines have been missed.« less

42 CFR 493.557 - Additional submission requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... scope of the specialty or subspecialty areas. (2) A description of the organization's data management..., Nonprofit Accreditation Organization or Exemption Under an Approved State Laboratory Program § 493.557 Additional submission requirements. (a) Specific requirements for accreditation organizations. In addition to...

Comparison of two scores for allocating resources to doctors in deprived areas.

PubMed

Hutchinson, A; Foy, C; Sandhu, B

1989-11-04

Current proposals in the general practitioner contract include additional payments to doctors working among deprived populations. The underprivileged area score will be used to identify local authority wards with the greatest levels of deprivation, thus acting as the basis for distributing considerable resources. Two methods of identifying deprived populations--the underprivileged area score and the material deprivation score--were compared to determine whether they result in similar allocation of resources to regions. Financial allocations to regions based on figures derived from the contract differed considerably if the material deprivation score was used instead of the underprivileged area score: Northern and Mersey regions gained over 50% of their allocation whereas East Anglia, Oxford, and South West Thames regions lost more than 30% of theirs. Such differences have considerable implications for doctors working among deprived populations as up to 60m pounds each year might be distributed by these payments.

Using geographic distribution of well-screen depths and hydrogeologic conditions to identify areas of concern for contaminant migration through inactive supply wells

NASA Astrophysics Data System (ADS)

Gailey, Robert M.

2018-02-01

Contaminant migration through inactive supply wells can negatively affect groundwater quality and the combined effects from groups of such wells may cause greater impacts. Because the number of wells in many basins is often large and the geographic areas involved can be vast, approaches are needed to estimate potential impacts and focus limited resources for investigation and corrective measures on the most important areas. One possibility is to evaluate the geographic distribution of well-screen depths relative to hydrogeologic conditions and assess where contaminant migration through wells may be impacting groundwater quality. This approach is demonstrated for a geographically extensive area in the southern Central Valley of California, USA. The conditions that lead to wells acting as conduits for contaminant migration are evaluated and areas where the problem likely occurs are identified. Although only a small fraction of all wells appear to act as conduits, potential impacts may be significant considering needs to control nonpoint-source pollution and improve drinking water quality for rural residents. Addressing a limited number of areas where contaminant migration rates are expected to be high may cost-effectively accomplish the most beneficial groundwater quality protection and improvement. While this work focuses on a specific region, the results indicate that impacts from groups of wells may occur in other areas with similar conditions. Analyses similar to that demonstrated here may guide efficient investigation and corrective action in such areas with benefits occurring for groundwater quality. Potential benefits may justify expenditures to develop the necessary data for performing the analyses.

Large Area Crop Inventory Experiment (LACIE). Executive summary

NASA Technical Reports Server (NTRS)

1978-01-01

The author has identified the following significant results. The Large Area Crop Inventory Experiment (LACIE), completed June 30, 1978, has met the USDA at-harvest goals (90% accuracy with a 90% confidence level) in the US Great Plains and U.S.S.R. for two consecutive years. In addition, in the U.S.S.R., LACIE indicated a shortfall in the '76-'77 wheat crop about two months prior to harvest, thus demonstrating the capability of LACIE to make accurate preharvest estimates.

Identifying areas of basin-floor recharge in the Trans-Pecos region and the link to vegetation

USGS Publications Warehouse

Walvoord, Michelle Ann; Phillips, Fred M.

2004-01-01

Comparative water potential and chloride profiles (∼10 m deep) collected from four vegetation communities in the Trans-Pecos region of the Chihuahuan Desert were assessed to evaluate the potential for using vegetation patterns as a means of efficiently improving large-scale estimates of basin-floor recharge in semiarid and arid regions. Analytical solutions and multiphase flow and transport modeling constrained flux histories and current fluxes across the water table at each site. Chloride bulge profiles containing ∼12–15 kyr of atmospheric deposition and long-term drying water potential profiles typified most desertscrub and grassland sites. In contrast, evidence of episodic sub-root zone percolation and chloride profiles containing <250 yr of atmospheric deposition characterized the woodland site. The results suggested that the desertscrub and grassland areas support small upward fluxes across the water table (nonrecharge), whereas the woodland site supports significant downward fluxes across the water table (recharge). A nonrecharge–recharge transition was identified to be collocated with a grassland–woodland ecotone. The establishment of vegetation–recharge relationships such as this will improve estimates of basin-scale recharge by identifying regions where no recharge is expected and regions where recharge is expected and point measurements should be concentrated. An approach integrating remotely sensed spatial distributions of vegetation and indicator relationships to recharge is both timely and warranted, although several caveats, as revealed in this study, should be noted. For example, the relative importance and distribution of vertical conduits that permit percolation to the water table merits future investigation.

Geophysical surveys combined with laboratory soil column experiments to identify and explore risk areas for soil and water pollution in feedlots

NASA Astrophysics Data System (ADS)

Espejo-Pérez, Antonio Jesus; Sainato, Claudia Mabel; Jairo Márquez-Molina, John; Giráldez, Juan Vicente; Vanderlinden, Karl

2014-05-01

Changes of land use without a correct planning may produce its deterioration with their social, economical and environmental irreversible consequences over short to medium time range. In Argentina, the expansion of soybean fields induced a reduction of the area of pastures dedicated to stockbreeding. As cattle activity is being progressively concentrated on small pens, at feedlots farms, problems of soil and water pollution, mainly by nitrate, have been detected. The characterization of the spatial and temporal variability of soil water content is very important because the mostly advective transport of solutes. To avoid intensive soil samplings, very expensive, one has to recur to geophysical exploration methods. The objective of this work was to identify risk areas within a feedlot of the NW zone of Buenos Aires Province, in Argentina through geophysical methods. The surveys were carried out with an electromagnetic induction profiler EMI-400 (GSSI) and a Time domain Reflectometry (TDR) survey of depth 0-0.10 m with soil sampling and measurement of moisture content with gravimetric method (0-1.0 m). Several trenches were dug inside the pens and also at a test site, where texture, apparent density, saturated hydraulic conductivity (Ks), electrical conductivity of the saturation paste extract and organic matter content (OM) were measured. The water retention curves for these soils were also determined. At one of the pens undisturbed soil columns were extracted at 3 locations. Laboratory analysis for 0-1.0 m indicated that soil texture was classified as sandy loam, average organic matter content (OM) was greater than 2.3% with low values of apparent density in the first 10 cm. The range of spatial dependence of data suggested that the number of soil samples could be reduced. Soil apparent electrical conductivity (ECa) and soil moisture were well correlated and indicated a clear spatial pattern in the corrals. TDR performance was acceptable to identify the spatial

Artificial intelligence in neurodegenerative disease research: use of IBM Watson to identify additional RNA-binding proteins altered in amyotrophic lateral sclerosis.

PubMed

Bakkar, Nadine; Kovalik, Tina; Lorenzini, Ileana; Spangler, Scott; Lacoste, Alix; Sponaugle, Kyle; Ferrante, Philip; Argentinis, Elenee; Sattler, Rita; Bowser, Robert

2018-02-01

Amyotrophic lateral sclerosis (ALS) is a devastating neurodegenerative disease with no effective treatments. Numerous RNA-binding proteins (RBPs) have been shown to be altered in ALS, with mutations in 11 RBPs causing familial forms of the disease, and 6 more RBPs showing abnormal expression/distribution in ALS albeit without any known mutations. RBP dysregulation is widely accepted as a contributing factor in ALS pathobiology. There are at least 1542 RBPs in the human genome; therefore, other unidentified RBPs may also be linked to the pathogenesis of ALS. We used IBM Watson ® to sieve through all RBPs in the genome and identify new RBPs linked to ALS (ALS-RBPs). IBM Watson extracted features from published literature to create semantic similarities and identify new connections between entities of interest. IBM Watson analyzed all published abstracts of previously known ALS-RBPs, and applied that text-based knowledge to all RBPs in the genome, ranking them by semantic similarity to the known set. We then validated the Watson top-ten-ranked RBPs at the protein and RNA levels in tissues from ALS and non-neurological disease controls, as well as in patient-derived induced pluripotent stem cells. 5 RBPs previously unlinked to ALS, hnRNPU, Syncrip, RBMS3, Caprin-1 and NUPL2, showed significant alterations in ALS compared to controls. Overall, we successfully used IBM Watson to help identify additional RBPs altered in ALS, highlighting the use of artificial intelligence tools to accelerate scientific discovery in ALS and possibly other complex neurological disorders.

Rivers and flooded areas identified by medium-resolution remote sensing improve risk prediction of the highly pathogenic avian influenza H5N1 in Thailand.

PubMed

Thanapongtharm, Weerapong; Van Boeckel, Thomas P; Biradar, Chandrashekhar; Xiao, Xiang-Ming; Gilbert, Marius

2013-11-01

Thailand experienced several epidemic waves of the highly pathogenic avian influenza (HPAI) H5N1 between 2004 and 2005. This study investigated the role of water in the landscape, which has not been previously assessed because of a lack of high-resolution information on the distribution of flooded land at the time of the epidemic. Nine Landsat 7 - Enhanced Thematic Mapper Plus scenes covering 174,610 km(2) were processed using k-means unsupervised classification to map the distribution of flooded areas as well as permanent lakes and reservoirs at the time of the main epidemic HPAI H5N1 wave of October 2004. These variables, together with other factors previously identified as significantly associated with risk, were entered into an autologistic regression model in order to quantify the gain in risk explanation over previously published models. We found that, in addition to other factors previously identified as associated with risk, the proportion of land covered by flooding along with expansion of rivers and streams, derived from an existing, sub-district level (administrative level no. 3) geographical information system database, was a highly significant risk factor in this 2004 HPAI epidemic. These results suggest that water-borne transmission could have partly contributed to the spread of HPAI H5N1 during the epidemic. Future work stemming from these results should involve studies where the actual distribution of small canals, rivers, ponds, rice paddy fields and farms are mapped and tested against farm-level data with respect to HPAI H5N1.

Rivers and flooded areas identified by medium-resolution remote sensing improve risk prediction of the highly pathogenic avian influenza H5N1 in Thailand

PubMed Central

Thanapongtharm, Weerapong; Van Boeckel, Thomas P.; Biradar, Chandrashekhar; Xiao, Xiangming; Gilbert, Marius

2016-01-01

Thailand experienced several epidemic waves of the highly pathogenic avian influenza (HPAI) H5N1 between 2004 and 2005. This study investigated the role of water in the landscape, which has not been previously assessed because of a lack of high-resolution information on the distribution of flooded land at the time of the epidemic. Nine Landsat 7-Enhanced Thematic Mapper Plus scenes covering 174,610 km2 were processed using k-means unsupervised classification to map the distribution of flooded areas as well as permanent lakes and reservoirs at the time of the main epidemic HPAI H5N1 wave of October 2004. These variables, together with other factors previously identified as significantly associated with risk, were entered into an autologistic regression model in order to quantify the gain in risk explanation over previously published models. We found that, in addition to other factors previously identified as associated with risk, the proportion of land covered by flooding along with expansion of rivers and streams, derived from an existing, sub-district level (administrative level no. 3) geographical information system database, was a highly significant risk factor in this 2004 HPAI epidemic. These results suggest that water-borne transmission could have partly contributed to the spread of HPAI H5N1 during the epidemic. Future work stemming from these results should involve studies where the actual distribution of small canals, rivers, ponds, rice paddy fields and farms are mapped and tested against farm-level data with respect to HPAI H5N1. PMID:24258895

PYRAMID ROADLESS AREA, CALIFORNIA.

USGS Publications Warehouse

Armstrong, Augustus K.; Scott, Douglas F.

1984-01-01

A geologic and mineral survey was conducted in the Pyramid Roadless Area, California. The area contains mineral showings, but no mineral-resource potential was identified during our studies. Three granodiorite samples on the west side of the roadless area contained weakly anomalous concentrations of uranium. Two samples of roof-pendant rocks, one metasedimentary rock and one metavolcanic rock, contain low concentrations of copper, and of copper and molybdenum, respectively. Although none was identified, the geologic terrane is permissive for mineral occurrences and large-scale, detailed geologic mapping of the areas of metasedimentary and metavolcanic roof pendants in the Pyramid Roadless Area could define a mineral-resource potential for tungsten and precious metals.

Congruence of Additive and Non-Additive Effects on Gene Expression Estimated from Pedigree and SNP Data

PubMed Central

Powell, Joseph E.; Henders, Anjali K.; McRae, Allan F.; Kim, Jinhee; Hemani, Gibran; Martin, Nicholas G.; Dermitzakis, Emmanouil T.; Gibson, Greg

2013-01-01

There is increasing evidence that heritable variation in gene expression underlies genetic variation in susceptibility to disease. Therefore, a comprehensive understanding of the similarity between relatives for transcript variation is warranted—in particular, dissection of phenotypic variation into additive and non-additive genetic factors and shared environmental effects. We conducted a gene expression study in blood samples of 862 individuals from 312 nuclear families containing MZ or DZ twin pairs using both pedigree and genotype information. From a pedigree analysis we show that the vast majority of genetic variation across 17,994 probes is additive, although non-additive genetic variation is identified for 960 transcripts. For 180 of the 960 transcripts with non-additive genetic variation, we identify expression quantitative trait loci (eQTL) with dominance effects in a sample of 339 unrelated individuals and replicate 31% of these associations in an independent sample of 139 unrelated individuals. Over-dominance was detected and replicated for a trans association between rs12313805 and ETV6, located 4MB apart on chromosome 12. Surprisingly, only 17 probes exhibit significant levels of common environmental effects, suggesting that environmental and lifestyle factors common to a family do not affect expression variation for most transcripts, at least those measured in blood. Consistent with the genetic architecture of common diseases, gene expression is predominantly additive, but a minority of transcripts display non-additive effects. PMID:23696747

Congruence of additive and non-additive effects on gene expression estimated from pedigree and SNP data.

PubMed

Powell, Joseph E; Henders, Anjali K; McRae, Allan F; Kim, Jinhee; Hemani, Gibran; Martin, Nicholas G; Dermitzakis, Emmanouil T; Gibson, Greg; Montgomery, Grant W; Visscher, Peter M

2013-05-01

There is increasing evidence that heritable variation in gene expression underlies genetic variation in susceptibility to disease. Therefore, a comprehensive understanding of the similarity between relatives for transcript variation is warranted--in particular, dissection of phenotypic variation into additive and non-additive genetic factors and shared environmental effects. We conducted a gene expression study in blood samples of 862 individuals from 312 nuclear families containing MZ or DZ twin pairs using both pedigree and genotype information. From a pedigree analysis we show that the vast majority of genetic variation across 17,994 probes is additive, although non-additive genetic variation is identified for 960 transcripts. For 180 of the 960 transcripts with non-additive genetic variation, we identify expression quantitative trait loci (eQTL) with dominance effects in a sample of 339 unrelated individuals and replicate 31% of these associations in an independent sample of 139 unrelated individuals. Over-dominance was detected and replicated for a trans association between rs12313805 and ETV6, located 4MB apart on chromosome 12. Surprisingly, only 17 probes exhibit significant levels of common environmental effects, suggesting that environmental and lifestyle factors common to a family do not affect expression variation for most transcripts, at least those measured in blood. Consistent with the genetic architecture of common diseases, gene expression is predominantly additive, but a minority of transcripts display non-additive effects.

Assessment of Offshore Wind Energy Leasing Areas for the BOEM Massachusetts Wind Energy Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musial, W.; Parker, Z.; Fields, M.

2013-12-01

The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL), under an interagency agreement with the Bureau of Ocean Energy Management (BOEM), is providing technical assistance to identify and delineate leasing areas for offshore wind energy development within the Atlantic Coast Wind Energy Areas (WEAs) established by BOEM. This report focuses on NREL's development of three delineated leasing area options for the Massachusetts (MA) WEA and the technical evaluation of these leasing areas. The overarching objective of this study is to develop a logical process by which the MA WEA can be subdivided into non-overlapping leasing areas for BOEM'smore » use in developing an auction process in a renewable energy lease sale. NREL worked with BOEM to identify an appropriate number of leasing areas and proposed three delineation alternatives within the MA WEA based on the boundaries announced in May 2012. A primary output of the interagency agreement is this report, which documents the methodology, including key variables and assumptions, by which the leasing areas were identified and delineated.« less

HIGH UINTAS PRIMITIVE AREA, UTAH.

USGS Publications Warehouse

Crittenden, Max D.; Sheridan, Michael J.

1984-01-01

Mineral surveys in the High Uintas Primitive Area, Utah and the additions subsequently proposed concluded that the area has little promise for mineral resources. Of the areas around the fringes, a strip along the north flank fault can be classed as having probable energy-resource potential for oil and gas. The oil and gas potential could be tested by additional seismic studies followed by drilling. Much of the necessary information probably could be obtained without drilling within the primitive area itself.

Evidence-based practice in Behçet’s disease: identifying areas of unmet need for 2014

PubMed Central

2014-01-01

Background Behçet’s Disease (BD) is characterized by a relapsing-remitting course, with symptoms of varying severity across almost all organ systems. There is a diverse array of therapeutic options with no universally accepted treatment regime, and it is thus important that clinical practice is evidence-based. We reviewed all currently available literature describing management of BD, and investigated whether evidence-based practice is possible for all disease manifestations, and assessed the range of therapeutic options tested. Methods We conducted an internet search of all literature describing management of BD up to August 2013, including pharmacological and non-pharmacological interventions. We recorded treatment options investigated and disease manifestations reported as primary and secondary study outcomes. Quality of data was assessed according to the Scottish Intercollegiate Guideline Network (SIGN) hierarchy of evidence. Results Whilst there is much literature describing treatment of ocular and mucocutaneous disease, there is little to guide management of rheumatoid, cardiovascular and neurological disease. This broadly reflects the prevalence of disease manifestations of BD, but not the severity. Biologic therapies are the most commonly investigated intervention. The proportion of SIGN-1 graded studies is declining, and there are no SIGN-1 graded studies investigating neurological or gastrointestinal manifestations of BD. Conclusions This is the first study to investigate trends in published literature for management of BD over time. It identifies neurological, cardiovascular and gastro-intestinal disease as particular areas of unmet need and suggests that overall quality of evidence is declining. Future research should be designed to address these areas of insufficiency to facilitate evidence-based practice in BD. PMID:24475935

Using the Theory of Planned Behavior to identify key beliefs underlying chlamydia testing intentions in a sample of young people living in deprived areas.

PubMed

Booth, Amy R; Norman, Paul; Harris, Peter R; Goyder, Elizabeth

2015-09-01

The Theory of Planned Behavior was used to identify the key behavioural, normative and control beliefs underlying intentions to test regularly for chlamydia among young people living in socially and economically deprived areas - a high-risk group for infection. Participants (N = 278, 53% male; mean age 17 years) were recruited from a vocational college situated in an area in the most deprived national quintile (England). Participants completed measures of behavioural, normative and control beliefs, plus intention to test regularly for chlamydia. The behavioural, normative and control beliefs most strongly correlated with intentions to test regularly for chlamydia were beliefs about stopping the spread of infection, partners' behaviour and the availability of testing. These beliefs represent potential targets for interventions to increase chlamydia testing among young people living in deprived areas. © The Author(s) 2013.

Remedial investigation concept plan for the groundwater operable units at the chemical plant area and the ordnance works area, Weldon Spring, Missouri

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1999-07-15

The U.S. Department of Energy (DOE) and the U.S. Department of the Army (DA) are conducting cleanup activities at two properties--the DOE chemical plant area and the DA ordnance works area (the latter includes the training area)--located in the Weldon Spring area in St. Charles County, Missouri. These areas are on the National Priorities List (NPL), and cleanup activities at both areas are conducted in accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended. DOE and DA are conducting a joint remedial investigation (RI) and baseline risk assessment (BRA) as part of the remedial investigation/feasibility studymore » (RI/FS) for the groundwater operable units for the two areas. This joint effort will optimize further data collection and interpretation efforts and facilitate overall remedial decision making since the aquifer of concern is common to both areas. A Work Plan issued jointly in 1995 by DOE and the DA discusses the results of investigations completed at the time of preparation of the report. The investigations were necessary to provide an understanding of the groundwater system beneath the chemical plant area and the ordnance works area. The Work Plan also identifies additional data requirements for verification of the evaluation presented.« less

Seasonal spatial patterns in seabird and marine mammal distribution in the eastern Chukchi and western Beaufort seas: Identifying biologically important pelagic areas

NASA Astrophysics Data System (ADS)

Kuletz, Kathy J.; Ferguson, Megan C.; Hurley, Brendan; Gall, Adrian E.; Labunski, Elizabeth A.; Morgan, Tawna C.

2015-08-01

The Chukchi and Beaufort seas are undergoing rapid climate change and increased human activity. Conservation efforts for upper trophic level predators such as seabirds and marine mammals require information on species' distributions and identification of important marine areas. Here we describe broad-scale distributions of seabirds and marine mammals. We examined spatial patterns of relative abundance of seabirds and marine mammals in the eastern Chukchi and western Beaufort seas during summer (15 June-31 August) and fall (1 September-20 November) from 2007 to 2012. We summarized 49,206 km of shipboard surveys for seabirds and 183,157 km of aerial surveys for marine mammals into a grid of 40-km × 40-km cells. We used Getis-Ord Gi∗ hotspot analysis to test for cells with higher relative abundance than expected when compared to all cells within the study area. We identified cells representing single species and taxonomic group hotspots, cells representing hotspots for multiple species, and cells representing hotspots for both seabirds and marine mammals. The locations of hotspots varied among species but often were located near underwater canyons or over continental shelf features and slopes. Hotspots for seabirds, walrus, and gray whales occurred primarily in the Chukchi Sea. Hotspots for bowhead whales and other pinnipeds (i.e., seals) occurred near Barrow Canyon and along the Beaufort Sea shelf and slope. Hotspots for belugas occurred in both the Chukchi and Beaufort seas. There were three hotspots shared by both seabirds and marine mammals in summer: off Wainwright in the eastern Chukchi Sea, south of Hanna Shoal, and at the mouth of Barrow Canyon. In fall, the only identified shared hotspot occurred at the mouth of Barrow Canyon. Shared hotspots are characterized by strong fronts caused by upwelling and currents, and these areas can have high densities of euphausiids in summer and fall. Due to the high relative abundance of animals and diversity of taxa

Additive-manufactured patient-specific titanium templates for thoracic pedicle screw placement: novel design with reduced contact area.

PubMed

Takemoto, Mitsuru; Fujibayashi, Shunsuke; Ota, Eigo; Otsuki, Bungo; Kimura, Hiroaki; Sakamoto, Takeshi; Kawai, Toshiyuki; Futami, Tohru; Sasaki, Kiyoyuki; Matsushita, Tomiharu; Nakamura, Takashi; Neo, Masashi; Matsuda, Shuich

2016-06-01

Image-based navigational patient-specific templates (PSTs) for pedicle screw (PS) placement have been described. With recent advances in three-dimensional computer-aided designs and additive manufacturing technology, various PST designs have been reported, although the template designs were not optimized. We have developed a novel PST design that reduces the contact area without sacrificing stability. It avoids susceptibility to intervening soft tissue, template geometric inaccuracy, and difficulty during template fitting. Fourteen candidate locations on the posterior aspect of the vertebra were evaluated. Among them, locations that had high reproducibility on computed tomography (CT) images and facilitated accurate PS placement were selected for the final PST design. An additive manufacturing machine (EOSINT M270) fabricated the PSTs using commercially pure titanium powder. For the clinical study, 36 scoliosis patients and 4 patients with ossification of the posterior longitudinal ligament (OPLL) were treated with thoracic PSs using our newly developed PSTs. We intraoperatively and postoperatively evaluated the accuracy of the PS hole created by the PST. Based on the segmentation reproducibility and stability analyses, we selected seven small, round contact points for our PST: bilateral superior and inferior points on the transverse process base, bilateral inferior points on the laminar, and a superior point on the spinous process. Clinically, the success rates of PS placement using this PST design were 98.6 % (414/420) for scoliosis patients and 100 % (46/46) for OPLL patients. This study provides a useful design concept for the development and introduction of patient-specific navigational templates for placing PSs.

Beyond imperviousness: A statistical approach to identifying functional differences between development morphologies on variable source area-type response in urbanized watersheds

NASA Astrophysics Data System (ADS)

Lim, T. C.

2016-12-01

Empirical evidence has shown linkages between urbanization, hydrological regime change, and degradation of water quality and aquatic habitat. Percent imperviousness, has long been suggested as the dominant source of these negative changes. However, recent research identifying alternative pathways of runoff production at the watershed scale have called into question percent impervious surface area's primacy in urban runoff production compared to other aspects of urbanization including change in vegetative cover, imported water and water leakages, and the presence of drainage infrastructure. In this research I show how a robust statistical methodology can detect evidence of variable source area (VSA)-type hydrologic response associated with incremental hydraulic connectivity in watersheds. I then use logistic regression to explore how evidence of VSA-type response relates to the physical and meterological characteristics of the watershed. I find that impervious surface area is highly correlated with development, but does not add significant explanatory power beyond percent developed in predicting VSA-type response. Other aspects of development morphology, including percent developed open space and type of drainage infrastructure also do not add to the explanatory power of undeveloped land in predicting VSA-type response. Within only developed areas, the effect of developed open space was found to be more similar to that of total impervious area than to undeveloped land. These findings were consistent when tested across a national cross-section of urbanized watersheds, a higher resolution dataset of Baltimore Metropolitan Area watersheds, and a subsample of watersheds confirmed not to be served by combined sewer systems. These findings suggest that land development policies that focus on lot coverage should be revisited, and more focus should be placed on preserving native vegetation and soil conditions alongside development.

Characteristics of Older Adults on Waiting Lists for Meals on Wheels: Identifying Areas for Intervention

PubMed Central

Thomas, Kali S.; Smego, Raul; Akobundu, Ucheoma; Dosa, David

2016-01-01

The purpose of this study was to characterize the population of seniors on Meals on Wheels’ (MOW) waiting lists and identify their rate of depression, anxiety, falls, and fear of falling. Data come from surveys of 626 seniors on waiting lists across the country and the 2013 National Health and Aging Trends Study (NHATS). Results suggest that seniors on waiting lists for MOW were more likely to be widowed, less educated, older, Black, Hispanic, and receive Medicaid than the population of community-dwelling older adults. In addition, 31% of seniors on MOW waiting lists were depressed, compared with 12% of seniors in the national population (p < .001), and 28% exhibited signs and symptoms of anxiety, compared with 10% of the national population of seniors (p < .001). Seniors on waiting lists were significantly more likely to have fallen in the last month and be fearful of falling than the national population of seniors (p < .001). Individuals on MOW waiting lists are a vulnerable and high-risk group. By seeking to better understand clients’ needs, appropriate services can be tailored to promote independent living and improve older adults’ well-being. PMID:26597791

43 CFR 3140.6 - Use of additional lands.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 43 Public Lands: Interior 2 2013-10-01 2013-10-01 false Use of additional lands. 3140.6 Section... additional lands. (a) The authorized officer may noncompetitively lease additional lands for ancillary facilities in a Special Tar Sand Area that are needed to support any operations necessary for the recovery of...

43 CFR 3140.6 - Use of additional lands.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 43 Public Lands: Interior 2 2012-10-01 2012-10-01 false Use of additional lands. 3140.6 Section... additional lands. (a) The authorized officer may noncompetitively lease additional lands for ancillary facilities in a Special Tar Sand Area that are needed to support any operations necessary for the recovery of...

43 CFR 3140.6 - Use of additional lands.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 43 Public Lands: Interior 2 2014-10-01 2014-10-01 false Use of additional lands. 3140.6 Section... additional lands. (a) The authorized officer may noncompetitively lease additional lands for ancillary facilities in a Special Tar Sand Area that are needed to support any operations necessary for the recovery of...

Identifying Human Trafficking Victims on a Psychiatry Inpatient Service: a Case Series.

PubMed

Nguyen, Phuong T; Lamkin, Joanna; Coverdale, John H; Scott, Samuel; Li, Karen; Gordon, Mollie R

2018-06-01

Human trafficking is a serious and prevalent human rights violation that closely intersects with mental health. Limited empirical attention has been paid to the presentations and identification of trafficking victims in psychiatric settings. The primary goal of this paper is to describe the varied presentations of trafficking victims on an urban inpatient psychiatric unit. A literature review was conducted to identify relevant empirical articles to inform our examination of cases. Adult inpatient cases meeting criteria for known or possible human trafficking were systematically identified and illustrative cases were described. Six cases were identified including one male and five females. Two had been labor trafficked and four were suspected or confirmed to have been sex trafficked. The cases demonstrated a tremendous diversity of demographic and psychiatric identifying factors. These cases indicate the importance of routinely screening for trafficking victims in inpatient psychiatry settings. Identification of cases is a requisite step in providing informed and evidence-based treatments and enabling the secondary prevention of re-exploitation. Additional research is warranted given the limited current empirical research on this topic area.

Tools to identify linear combination of prognostic factors which maximizes area under receiver operator curve.

PubMed

Todor, Nicolae; Todor, Irina; Săplăcan, Gavril

2014-01-01

The linear combination of variables is an attractive method in many medical analyses targeting a score to classify patients. In the case of ROC curves the most popular problem is to identify the linear combination which maximizes area under curve (AUC). This problem is complete closed when normality assumptions are met. With no assumption of normality search algorithm are avoided because it is accepted that we have to evaluate AUC n(d) times where n is the number of distinct observation and d is the number of variables. For d = 2, using particularities of AUC formula, we described an algorithm which lowered the number of evaluations of AUC from n(2) to n(n-1) + 1. For d > 2 our proposed solution is an approximate method by considering equidistant points on the unit sphere in R(d) where we evaluate AUC. The algorithms were applied to data from our lab to predict response of treatment by a set of molecular markers in cervical cancers patients. In order to evaluate the strength of our algorithms a simulation was added. In the case of no normality presented algorithms are feasible. For many variables computation time could be increased but acceptable.

77 FR 58911 - Additional Identifying Information for One (1) Individual Designated Pursuant to Executive Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-24

... Designated Nationals and Blocked Persons (``SDN List'') on September 13, 2012. FOR FURTHER INFORMATION... and Facsimile Availability The SDN List and additional information concerning OFAC are available from...

Identifying potential academic leaders

PubMed Central

White, David; Krueger, Paul; Meaney, Christopher; Antao, Viola; Kim, Florence; Kwong, Jeffrey C.

2016-01-01

Objective To identify variables associated with willingness to undertake leadership roles among academic family medicine faculty. Design Web-based survey. Bivariate and multivariable analyses (logistic regression) were used to identify variables associated with willingness to undertake leadership roles. Setting Department of Family and Community Medicine at the University of Toronto in Ontario. Participants A total of 687 faculty members. Main outcome measures Variables related to respondents’ willingness to take on various academic leadership roles. Results Of all 1029 faculty members invited to participate in the survey, 687 (66.8%) members responded. Of the respondents, 596 (86.8%) indicated their level of willingness to take on various academic leadership roles. Multivariable analysis revealed that the predictors associated with willingness to take on leadership roles were as follows: pursuit of professional development opportunities (odds ratio [OR] 3.79, 95% CI 2.29 to 6.27); currently holding at least 1 leadership role (OR 5.37, 95% CI 3.38 to 8.53); a history of leadership training (OR 1.86, 95% CI 1.25 to 2.78); the perception that mentorship is important for one’s current role (OR 2.25, 95% CI 1.40 to 3.60); and younger age (OR 0.97, 95% CI 0.95 to 0.99). Conclusion Willingness to undertake new or additional leadership roles was associated with 2 variables related to leadership experiences, 2 variables related to perceptions of mentorship and professional development, and 1 demographic variable (younger age). Interventions that support opportunities in these areas might expand the pool and strengthen the academic leadership potential of faculty members. PMID:27331226

76 FR 30052 - Proposed Establishment of the Coombsville Viticultural Area (2010R-009P)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-24

... viticultural areas to allow vintners to better describe the origin of their wines and to allow consumers to better identify wines they may purchase. TTB invites comments on this proposed addition to the TTB...://www.ttb.gov/wine/wine_rulemaking.shtml under Notice No. 119. You also may view copies of this notice...

[Total analysis of organic rubber additives].

PubMed

He, Wen-Xuan; Robert, Shanks; You, Ye-Ming

2010-03-01

In the present paper, after middle pressure chromatograph separation using both positive phase and reversed-phase conditions, the organic additives in ethylene-propylene rubber were identified by infrared spectrometer. At the same time, by using solid phase extraction column to maintain the main component-fuel oil in organic additves to avoid its interfering with minor compounds, other organic additves were separated and analysed by GC/Ms. In addition, the remaining active compound such as benzoyl peroxide was identified by CC/Ms, through analyzing acetone extract directly. Using the above mentioned techniques, soften agents (fuel oil, plant oil and phthalte), curing agent (benzoylperoxide), vulcanizing accelerators (2-mercaptobenzothiazole, ethyl thiuram and butyl thiuram), and antiagers (2, 6-Di-tert-butyl-4-methyl phenol and styrenated phenol) in ethylene-propylene rubber were identified. Although the technique was established in ethylene-propylene rubber system, it can be used in other rubber system.

Environmental analysis of geopressured-geothermal prospect areas, De Witt and Colorado counties, Texas. Final report, March 1 - August 31, 1979

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gustavson, T.C.; Reeder, F.S.; Badger, E.A.

Information collected and analyzed for a preliminary environmental analysis of geopressured geothermal prospect areas in Colorado and DeWitt Counties, Texas is presented. Specific environmental concerns for each geopressured geothermal prospect area are identified and discussed. Approximately 218 km/sup 2/(85 mi/sup 2/) were studied in the vicinity of each prospect area to: (1) conduct an environmental analysis to identify more and less suited areas for geopressured test wells; and (2) provide an environmental data base for future development of geopressured geothermal energy resources. A series of maps and tables are included to illustrate environmental characteristics including: geology, water resources, soils, currentmore » land use, vegetation, wildlife, and meteorological characteristics, and additional relevant information on cultural resources, power- and pipelines, and regulatory agencies. A series of transparent overlays at the scale of the original mapping has also been produced for the purposes of identifying and ranking areas of potential conflict between geopressured geothermal development and environmental characteristics. The methodology for ranking suitability of areas within the two prospect areas is discussed in the appendix. (MHR)« less

Hydro-geomorphic connectivity and landslide features extraction to identifying potential threats and hazardous areas

NASA Astrophysics Data System (ADS)

Tarolli, Paolo; Fuller, Ian C.; Basso, Federica; Cavalli, Marco; Sofia, Giulia

2017-04-01

Hydro-geomorphic connectivity has significantly emerged as a new concept to understand the transfer of surface water and sediment through landscapes. A further scientific challenge is determining how the concept can be used to enable sustainable land and water management. This research proposes an interesting approach to integrating remote sensing techniques, connectivity theory, and geomorphometry based on high-resolution digital terrain model (HR-DTMs) to automatically extract landslides crowns and gully erosion, to determine the different rate of connectivity among the main extracted features and the river network, and thus determine a possible categorization of hazardous areas. The study takes place in two mountainous regions in the Wellington Region (New Zealand). The methodology is a three step approach. Firstly, we performed an automatic detection of the likely landslides crowns through the use of thresholds obtained by the statistical analysis of the variability of landform curvature. After that, the research considered the Connectivity Index to analyse how a complex and rugged topography induces large variations in erosion and sediment delivery in the two catchments. Lastly, the two methods have been integrated to create a unique procedure able to classify the different rate of connectivity among the main features and the river network and thus identifying potential threats and hazardous areas. The methodology is fast, and it can produce a detailed and updated inventory map that could be a key tool for erosional and sediment delivery hazard mitigation. This fast and simple method can be a useful tool to manage emergencies giving priorities to more failure-prone zones. Furthermore, it could be considered to do a preliminary interpretations of geomorphological phenomena and more in general, it could be the base to develop inventory maps. References Cavalli M, Trevisani S, Comiti F, Marchi L. 2013. Geomorphometric assessment of spatial sediment connectivity

Identifying the mechanism of Escherichia coli O157:H7 survival by the addition of salt in the treatment with organic acids.

PubMed

Bae, Y-M; Yoon, J-H; Kim, J-Y; Lee, S-Y

2018-01-01

In this study, the effects of the addition of salt to treatment with acids (one of several organic acids and salt in various solutions including rich or minimal broth, buffer, or distilled water) on the reduction of Escherichia coli O157:H7 were investigated. The protein expression profiles corresponding to acid stress (acetic acid) with or without salt addition were studied using a comparative proteomic analysis of E. coli O157:H7. When acetic, lactic, or propionic acid was combined with 3% NaCl, mutually antagonistic effects of acid and salt on viability of E. coli O157:H7 were observed only in tryptone and yeast extract broth. After exposure to acetic acid alone or in combination with salt, approximately 851 and 916 protein spots were detected, respectively. Analysis of 10 statistically significant differentially expressed proteins revealed that these proteins are mainly related to energy metabolism. When we compared protein expression of E. coli O157:H7 treated with acetic acid and the combination of the acid and salt, the differentially expressed proteins were not related to acid stress- and salt stress-inducible proteins such as stress shock proteins. According to these results, the increased resistance of E. coli O157:H7 to acetic acid after the addition of salt may not be the result of synthesis of proteins related to these phenomena; therefore, further research needs to be conducted to identify the mechanism of the mutually antagonistic effect of some organic acids and salt. © 2017 The Society for Applied Microbiology.

Topological Constraints on Identifying Additive Link Metrics via End-to-end Paths Measurements

DTIC Science & Technology

2012-09-20

can be applied to each Gi separately when H is disconnected. ... ( a ) (b) (c) (d) G1 G2 G1 G2 l1 l1 l2l2 m2 m1 r a1 akr a2 m2 m1 r1 s1 l1 l2 r2 s2 a1i...Email: towsley@cs.umass.edu Abstract—We investigate the problem of identifying individual link metrics in a communication network through measuring...the number of links in the network. There lacks, however, a fundamental theory to relate the number of linearly independent paths (and thus link

LOST CREEK ROADLESS AREA, CALIFORNIA.

USGS Publications Warehouse

Muffler, L.J. Patrick; Campbell, Harry W.

1984-01-01

Geologic and mineral-resource investigations identified no mineral-resource potential in the Lost Creek Roadless Area, California. Sand and gravel have been mined from alluvial flood-plain deposits less than 1 mi outside the roadless area; these deposits are likely to extend into the roadless area beneath a Holocene basalt flow that may be as much as 40 ft thick. An oil and gas lease application which includes the eastern portion of the roadless area is pending. Abundant basalt in the area can be crushed and used as aggregate, but similar deposits of volcanic cinders or sand and gravel in more favorable locations are available outside the roadless area closer to major markets. No indication of coal or geothermal energy resources was identified.

Delimiting Areas of Endemism through Kernel Interpolation

PubMed Central

Oliveira, Ubirajara; Brescovit, Antonio D.; Santos, Adalberto J.

2015-01-01

We propose a new approach for identification of areas of endemism, the Geographical Interpolation of Endemism (GIE), based on kernel spatial interpolation. This method differs from others in being independent of grid cells. This new approach is based on estimating the overlap between the distribution of species through a kernel interpolation of centroids of species distribution and areas of influence defined from the distance between the centroid and the farthest point of occurrence of each species. We used this method to delimit areas of endemism of spiders from Brazil. To assess the effectiveness of GIE, we analyzed the same data using Parsimony Analysis of Endemism and NDM and compared the areas identified through each method. The analyses using GIE identified 101 areas of endemism of spiders in Brazil GIE demonstrated to be effective in identifying areas of endemism in multiple scales, with fuzzy edges and supported by more synendemic species than in the other methods. The areas of endemism identified with GIE were generally congruent with those identified for other taxonomic groups, suggesting that common processes can be responsible for the origin and maintenance of these biogeographic units. PMID:25611971

A Predictive Model Has Identified Tick-Borne Encephalitis High-Risk Areas in Regions Where No Cases Were Reported Previously, Poland, 1999–2012

PubMed Central

Rubikowska, Barbara; Bratkowski, Jakub; Ustrnul, Zbigniew; Vanwambeke, Sophie O.

2018-01-01

During 1999–2012, 77% of the cases of tick-borne encephalitis (TBE) were recorded in two out of 16 Polish provinces. However, historical data, mostly from national serosurveys, suggest that the disease could be undetected in many areas. The aim of this study was to identify which routinely-measured meteorological, environmental, and socio-economic factors are associated to TBE human risk across Poland, with a particular focus on areas reporting few cases, but where serosurveys suggest higher incidence. We fitted a zero-inflated Poisson model using data on TBE incidence recorded in 108 NUTS-5 administrative units in high-risk areas over the period 1999–2012. Subsequently we applied the best fitting model to all Polish municipalities. Keeping the remaining variables constant, the predicted rate increased with the increase of air temperature over the previous 10–20 days, precipitation over the previous 20–30 days, in forestation, forest edge density, forest road density, and unemployment. The predicted rate decreased with increasing distance from forests. The map of predicted rates was consistent with the established risk areas. It predicted, however, high rates in provinces considered TBE-free. We recommend raising awareness among physicians working in the predicted high-risk areas and considering routine use of household animal surveys for risk mapping. PMID:29617333

Crop identification and area estimation over large geographic areas using LANDSAT MSS data

NASA Technical Reports Server (NTRS)

Bauer, M. E. (Principal Investigator)

1977-01-01

The author has identified the following significant results. LANDSAT MSS data was adequate to accurately identify wheat in Kansas; corn and soybean estimates in Indiana were less accurate. Computer-aided analysis techniques were effectively used to extract crop identification information from LANDSAT data. Systematic sampling of entire counties made possible by computer classification methods resulted in very precise area estimates at county, district, and state levels. Training statistics were successfully extended from one county to other counties having similar crops and soils if the training areas sampled the total variation of the area to be classified.

Assessment of Offshore Wind Energy Leasing Areas for the BOEM New Jersey Wind Energy Area

DOE Office of Scientific and Technical Information (OSTI.GOV)

Musial, W.; Elliott, D.; Fields, J.

2013-10-01

The National Renewable Energy Laboratory (NREL), under an interagency agreement with the U.S. Department of the Interior's Bureau of Ocean Energy Management (BOEM), is providing technical assistance to identify and delineate leasing areas for offshore wind energy development within the Atlantic Coast Wind Energy Areas (WEAs) established by BOEM. This report focuses on NREL's development and evaluation of the delineations for the New Jersey (NJ) WEA. The overarching objective of this study is to develop a logical process by which the New Jersey WEA can be subdivided into non-overlapping leasing areas for BOEM's use in developing an auction process inmore » a renewable energy lease sale. NREL identified a selection of leasing areas and proposed delineation boundaries within the established NJ WEA. The primary output of the interagency agreement is this report, which documents the methodology, including key variables and assumptions, by which the leasing areas were identified and delineated.« less

Biotic and Climatic Velocity Identify Contrasting Areas of Vulnerability to Climate Change.

PubMed

Carroll, Carlos; Lawler, Joshua J; Roberts, David R; Hamann, Andreas

2015-01-01

Metrics that synthesize the complex effects of climate change are essential tools for mapping future threats to biodiversity and predicting which species are likely to adapt in place to new climatic conditions, disperse and establish in areas with newly suitable climate, or face the prospect of extirpation. The most commonly used of such metrics is the velocity of climate change, which estimates the speed at which species must migrate over the earth's surface to maintain constant climatic conditions. However, "analog-based" velocities, which represent the actual distance to where analogous climates will be found in the future, may provide contrasting results to the more common form of velocity based on local climate gradients. Additionally, whereas climatic velocity reflects the exposure of organisms to climate change, resultant biotic effects are dependent on the sensitivity of individual species as reflected in part by their climatic niche width. This has motivated development of biotic velocity, a metric which uses data on projected species range shifts to estimate the velocity at which species must move to track their climatic niche. We calculated climatic and biotic velocity for the Western Hemisphere for 1961-2100, and applied the results to example ecological and conservation planning questions, to demonstrate the potential of such analog-based metrics to provide information on broad-scale patterns of exposure and sensitivity. Geographic patterns of biotic velocity for 2954 species of birds, mammals, and amphibians differed from climatic velocity in north temperate and boreal regions. However, both biotic and climatic velocities were greatest at low latitudes, implying that threats to equatorial species arise from both the future magnitude of climatic velocities and the narrow climatic tolerances of species in these regions, which currently experience low seasonal and interannual climatic variability. Biotic and climatic velocity, by approximating lower and

Biotic and Climatic Velocity Identify Contrasting Areas of Vulnerability to Climate Change

PubMed Central

Carroll, Carlos; Lawler, Joshua J.; Roberts, David R.; Hamann, Andreas

2015-01-01

Metrics that synthesize the complex effects of climate change are essential tools for mapping future threats to biodiversity and predicting which species are likely to adapt in place to new climatic conditions, disperse and establish in areas with newly suitable climate, or face the prospect of extirpation. The most commonly used of such metrics is the velocity of climate change, which estimates the speed at which species must migrate over the earth’s surface to maintain constant climatic conditions. However, “analog-based” velocities, which represent the actual distance to where analogous climates will be found in the future, may provide contrasting results to the more common form of velocity based on local climate gradients. Additionally, whereas climatic velocity reflects the exposure of organisms to climate change, resultant biotic effects are dependent on the sensitivity of individual species as reflected in part by their climatic niche width. This has motivated development of biotic velocity, a metric which uses data on projected species range shifts to estimate the velocity at which species must move to track their climatic niche. We calculated climatic and biotic velocity for the Western Hemisphere for 1961–2100, and applied the results to example ecological and conservation planning questions, to demonstrate the potential of such analog-based metrics to provide information on broad-scale patterns of exposure and sensitivity. Geographic patterns of biotic velocity for 2954 species of birds, mammals, and amphibians differed from climatic velocity in north temperate and boreal regions. However, both biotic and climatic velocities were greatest at low latitudes, implying that threats to equatorial species arise from both the future magnitude of climatic velocities and the narrow climatic tolerances of species in these regions, which currently experience low seasonal and interannual climatic variability. Biotic and climatic velocity, by approximating

Getting the complete picture: combining parental and child data to identify the barriers to social inclusion for children living in low socio-economic areas.

PubMed

Davies, B; Davis, E; Cook, K; Waters, E

2008-03-01

Childhood mental health problems are prevalent in Australian children (14-20%). Social exclusion is a risk factor for mental health problems, whereas being socially included can have protective effects. This study aims to identify the barriers to social inclusion for children aged 9-12 years living in low socio-economic status (SES) areas, using both child-report and parent-report interviews. Australian-born English-speaking parents and children aged 9-12 years were sampled from a low SES area to participate in semi-structured interviews. Parents and children were asked questions around three prominent themes of social exclusion; exclusion from school, social activities and social networks. Many children experienced social exclusion at school, from social activities or within social networks. Overall, nine key barriers to social inclusion were identified through parent and child interviews, such as inability to attend school camps and participate in school activities, bullying and being left out, time and transport constraints, financial constraints and safety and traffic concerns. Parents and children often identified different barriers. There are several barriers to social inclusion for children living in low SES communities, many of which can be used to facilitate mental health promotion programmes. Given that parents and children may report different barriers, it is important to seek both perspectives. This study strengthens the evidence base for the investments and action required to bring about the conditions for social inclusion for children living in low SES communities.

SILL HILL, HAUSER, AND CALIENTE ROADLESS AREAS, CALIFORNIA.

USGS Publications Warehouse

Todd, Victoria R.; Peters, Thomas J.

1984-01-01

Probable resource potential for metallic minerals and gemstones was identified during mineral-resource surveys in the Sill Hill, Hauser, and Caliente Roadless Areas, California. Parts of the Sill Hill Roadless Area have a probable potential for gold, tungsten, and nickel and by-product copper. Part of the Caliente Roadless Area has a probable potential for tourmaline, beryl, quartz, and possibly other specimen minerals and gemstones. No mineral-resource potential was identified in the Hauser Roadless Area, although potash feldspar is abundant as a rock-forming constituent in two parts of the area. The Caliente Roadless Area lies less than 1 mi from an area of hot springs activity which may be part of a low-grade geothermal resource area, but no geothermal resource potential was identified in this or any of the other areas. No resource potential for nuclear energy was identified in this study and the geologic terrane precludes the occurrence of hydrocarbon resources.

Quantifying the relative irreplaceability of important bird and biodiversity areas.

PubMed

Di Marco, Moreno; Brooks, Thomas; Cuttelod, Annabelle; Fishpool, Lincoln D C; Rondinini, Carlo; Smith, Robert J; Bennun, Leon; Butchart, Stuart H M; Ferrier, Simon; Foppen, Ruud P B; Joppa, Lucas; Juffe-Bignoli, Diego; Knight, Andrew T; Lamoreux, John F; Langhammer, Penny F; May, Ian; Possingham, Hugh P; Visconti, Piero; Watson, James E M; Woodley, Stephen

2016-04-01

World governments have committed to increase the global protected areas coverage by 2020, but the effectiveness of this commitment for protecting biodiversity depends on where new protected areas are located. Threshold- and complementarity-based approaches have been independently used to identify important sites for biodiversity. We brought together these approaches by performing a complementarity-based analysis of irreplaceability in important bird and biodiversity areas (IBAs), which are sites identified using a threshold-based approach. We determined whether irreplaceability values are higher inside than outside IBAs and whether any observed difference depends on known characteristics of the IBAs. We focused on 3 regions with comprehensive IBA inventories and bird distribution atlases: Australia, southern Africa, and Europe. Irreplaceability values were significantly higher inside than outside IBAs, although differences were much smaller in Europe than elsewhere. Higher irreplaceability values in IBAs were associated with the presence and number of restricted-range species; number of criteria under which the site was identified; and mean geographic range size of the species for which the site was identified (trigger species). In addition, IBAs were characterized by higher irreplaceability values when using proportional species representation targets, rather than fixed targets. There were broadly comparable results when measuring irreplaceability for trigger species and when considering all bird species, which indicates a good surrogacy effect of the former. Recently, the International Union for Conservation of Nature has convened a consultation to consolidate global standards for the identification of key biodiversity areas (KBAs), building from existing approaches such as IBAs. Our results informed this consultation, and in particular a proposed irreplaceability criterion that will allow the new KBA standard to draw on the strengths of both threshold- and

Bone Area Histomorphometry.

PubMed

Andronowski, Janna M; Crowder, Christian

2018-05-21

Quantifying the amount of cortical bone loss is one variable used in histological methods of adult age estimation. Measurements of cortical area tend to be subjective and additional information regarding bone loss is not captured considering cancellous bone is disregarded. We describe whether measuring bone area (cancellous + cortical area) rather than cortical area may improve histological age estimation for the sixth rib. Mid-shaft rib cross-sections (n = 114) with a skewed sex distribution were analyzed. Ages range from 16 to 87 years. Variables included: total cross-sectional area, cortical area, bone area, relative bone area, relative cortical area, and endosteal area. Males have larger mean total cross-sectional area, bone area, and cortical area than females. Females display a larger mean endosteal area and greater mean relative measure values. Relative bone area significantly correlates with age. The relative bone area variable will provide researchers with a less subjective and more accurate measure than cortical area. © 2018 American Academy of Forensic Sciences.

Do Quiet Areas Afford Greater Health-Related Quality of Life than Noisy Areas?

PubMed Central

Shepherd, Daniel; Welch, David; Dirks, Kim N.; McBride, David

2013-01-01

People typically choose to live in quiet areas in order to safeguard their health and wellbeing. However, the benefits of living in quiet areas are relatively understudied compared to the burdens associated with living in noisy areas. Additionally, research is increasingly focusing on the relationship between the human response to noise and measures of health and wellbeing, complementing traditional dose-response approaches, and further elucidating the impact of noise and health by incorporating human factors as mediators and moderators. To further explore the benefits of living in quiet areas, we compared the results of health-related quality of life (HRQOL) questionnaire datasets collected from households in localities differentiated by their soundscapes and population density: noisy city, quiet city, quiet rural, and noisy rural. The dose-response relationships between noise annoyance and HRQOL measures indicated an inverse relationship between the two. Additionally, quiet areas were found to have higher mean HRQOL domain scores than noisy areas. This research further supports the protection of quiet locales and ongoing noise abatement in noisy areas. PMID:23535280

[Effect of biochar addition on soil evaporation.

PubMed

Xu, Jian; Niu, Wen Quan; Zhang, Ming Zhi; Li, Yuan; Lyu, Wang; Li, Kang-Yong; Zou, Xiao-Yang; Liang, Bo-Hui

2016-11-18

In order to determine the rational amount of biochar application and its effect on soil hydrological processes in arid area, soil column experiments were conducted in the laboratory using three biochar additions (5%, 10% and 15%) and four different biochar types (d<0.25 mm bamboo charcoal, 0.25 mm addition of biochar could change the phreatic water recharge, soil water-holding capacity, capillary water upward movement and soil evaporation obviously. But the effects were different depending on the type of biochar raw material and the size of particle. The phreatic water recharge increased with the increasing amount of biochar addition. The addition of biochar could obviously enlarge the soil water-holding capacity and promote the capillary water upward movement rate. This effect was greater when using the material of bamboo charcoal compared with using wood charcoal, while biochar with small particle size had greater impact than that with big particle size. The biochar could effectively restrain the soil evaporation at a low addition amount (5%). But it definitely promoted the soil evaporation if the addition amount was very high. In arid area, biochar addition in appropriate amount could improve soil water retention capacity.

Identifying seizure onset zone from electrocorticographic recordings: A machine learning approach based on phase locking value.

PubMed

Elahian, Bahareh; Yeasin, Mohammed; Mudigoudar, Basanagoud; Wheless, James W; Babajani-Feremi, Abbas

2017-10-01

Using a novel technique based on phase locking value (PLV), we investigated the potential for features extracted from electrocorticographic (ECoG) recordings to serve as biomarkers to identify the seizure onset zone (SOZ). We computed the PLV between the phase of the amplitude of high gamma activity (80-150Hz) and the phase of lower frequency rhythms (4-30Hz) from ECoG recordings obtained from 10 patients with epilepsy (21 seizures). We extracted five features from the PLV and used a machine learning approach based on logistic regression to build a model that classifies electrodes as SOZ or non-SOZ. More than 96% of electrodes identified as the SOZ by our algorithm were within the resected area in six seizure-free patients. In four non-seizure-free patients, more than 31% of the identified SOZ electrodes by our algorithm were outside the resected area. In addition, we observed that the seizure outcome in non-seizure-free patients correlated with the number of non-resected SOZ electrodes identified by our algorithm. This machine learning approach, based on features extracted from the PLV, effectively identified electrodes within the SOZ. The approach has the potential to assist clinicians in surgical decision-making when pre-surgical intracranial recordings are utilized. Copyright © 2017 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

Leveraging modern climatology to increase adaptive capacity across protected area networks

USGS Publications Warehouse

Davison, J.E.; Graumlich, L.J.; Rowland, E.L.; Pederson, G.T.; Breshears, D.D.

2012-01-01

Human-driven changes in the global environment pose an increasingly urgent challenge for the management of ecosystems that is made all the more difficult by the uncertain future of both environmental conditions and ecological responses. Land managers need strategies to increase regional adaptive capacity, but relevant and rapid assessment approaches are lacking. To address this need, we developed a method to assess regional protected area networks across biophysically important climatic gradients often linked to biodiversity and ecosystem function. We plot the land of the southwestern United States across axes of historical climate space, and identify landscapes that may serve as strategic additions to current protected area portfolios. Considering climate space is straightforward, and it can be applied using a variety of relevant climate parameters across differing levels of land protection status. The resulting maps identify lands that are climatically distinct from existing protected areas, and may be utilized in combination with other ecological and socio-economic information essential to collaborative landscape-scale decision-making. Alongside other strategies intended to protect species of special concern, natural resources, and other ecosystem services, the methods presented herein provide another important hedging strategy intended to increase the adaptive capacity of protected area networks. ?? 2011 Elsevier Ltd.

Rapid screening of illicit additives in weight loss dietary supplements with desorption corona beam ionisation (DCBI) mass spectrometry.

PubMed

Wang, H; Wu, Y; Zhao, Y; Sun, W; Ding, L; Guo, B; Chen, B

2012-08-01

Desorption corona beam ionisation (DCBI), the relatively novel ambient mass spectrometry (MS) technique, was utilised to screen for illicit additives in weight-loss food. The five usually abused chemicals - fenfluramine, N-di-desmethyl sibutramine, N-mono-desmethyl sibutramine, sibutramine and phenolphthalein - were detected with the proposed DCBI-MS method. Fast single-sample and high-throughput analysis was demonstrated. Semi-quantification was accomplished based on peak areas in the ion chromatograms. Four illicit additives were identified and semi-quantified in commercial samples. As there was no tedious sample pre-treatment compared with conventional HPLC methods, high-throughput analysis was achieved with DCBI. The results proved that DCBI-MS is a powerful tool for the rapid screening of illicit additives in weight-loss dietary supplements.

Estuarine monitoring programs in the Albemarle Sound study area, North Carolina

USGS Publications Warehouse

Moorman, Michelle; Kolb, Katharine R.; Supak, Stacy

2014-01-01

The purpose of this report is to identify major natural resource management issues for the region, provide information on current monitoring activities occurring within the Albemarle Sound study area, determine how the current monitoring network fits into the design of the NMN, and determine what additional monitoring data are needed to address these issues. In order to address these questions, a shapefile and data table were created to document monitoring and research programs in the Albemarle Sound study area with an emphasis on current monitoring programs within the region. This database was queried to determine monitoring gaps that existed in the Albemarle Sound by comparing current monitoring programs with the design indicated by the NMN. The report uses this information to provide recommendations on how monitoring could be improved in the Albemarle Sound study area.

EPA Region 7 Aquatic Focus Areas (ECO_RES.R7_AQUATIC_FOCUS_AREAS)

EPA Pesticide Factsheets

This shapefile consists of 347 individual Aquatic Ecological System (AES) polygons that are the Aquatic Conservation Focus Areas for EPA Region 7. The focus areas are those areas within each aquatic ecological system types that, if preserved, would maintain the biological and ecological diversity extant within that ecological system type. The layer consists of those polygons from the R7_AES.shp shapefile that had the highest ranks. The AES polygons in the Missouri portion of the file were appended and are those that contain the 158 aquatic conservation opportunity areas identified in Missouri as part of another project (Missouri Department of Conservation Aquatic Biodiversity Assessment 2005). Note that the identifiers in the Missouri portion of this file will not match the ID's in any Missouri specific files.

Use of artificial neural networks to identify the origin of green macroalgae

NASA Astrophysics Data System (ADS)

Żbikowski, Radosław

2011-08-01

This study demonstrates application of artificial neural networks (ANNs) for identifying the origin of green macroalgae ( Enteromorpha sp. and Cladophora sp.) according to their concentrations of Cd, Cu, Ni, Zn, Mn, Pb, Na, Ca, K and Mg. Earlier studies confirmed that algae can be used for biomonitoring surveys of metal contaminants in coastal areas of the Southern Baltic. The same data sets were classified with the use of different structures of radial basis function (RBF) and multilayer perceptron (MLP) networks. The selected networks were able to classify the samples according to their geographical origin, i.e. Southern Baltic, Gulf of Gdańsk and Vistula Lagoon. Additionally in the case of macroalgae from the Gulf of Gdańsk, the networks enabled the discrimination of samples according to areas of contrasting levels of pollution. Hence this study shows that artificial neural networks can be a valuable tool in biomonitoring studies.

Prediction of aortic valvular area and gradient by noninvasive techniques.

PubMed

Cousins, A L; Eddleman, E E; Reeves, T J

1978-03-01

Sixty-two patients with isolated aortic valvular stenosis were analyzed by a series of common noninvasive procedures and by cardiac catheterization. The data from 50 of these were evaluated in a retrospective fashion by multiple regression methods to determine significant objectively obtained predictors of aortic-left ventricular gradient and valvular area. Formulae were derived from these analyses and an additional 12 patients were then studied prospectively to evaluate the validity of the predictive formulae. Forty-three of 50 patients (86 per cent) were correctly identified as to a gradient of greater or less than 50 mm. Hg in the initial group, and all those in the prospectively studied sample were correctly classified. Thiry-five of 43 patients (82 per cent) of those with valve area data in the first application were correctly classified as to valve area or greater or less than 0.8 cm.2, and all patients in the prospectively studied group were appropriately identified as to the same area. The combined application of the observations of calcification of the aortic valve, shudder waves on the anacrotic limb, prolonged time to peak of the percussion wave and alteration of the dicrotic notch of the carotid pulse tracing, left ventricular hypertrophy by electrocardiogram, and the altered duration of ventricular ejection time were reliable predictors of elevated aortic-left ventricular gradient and decreased aortic valvular size.

76 FR 30060 - Proposed Establishment of the Naches Heights Viticultural Area (2009R-107P)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-24

... areas to allow vintners to better describe the origin of their wines and to allow consumers to better identify wines they may purchase. TTB invites comments on this proposed addition to the Bureau's.... TTB-2011-0005. A direct link to this docket is posted on the TTB Web site at http://www.ttb.gov/wine...

WEAVER BALLY ROADLESS AREA, CALIFORNIA.

USGS Publications Warehouse

Blake, M.C.; Peters, T.J.

1984-01-01

The Weaver Bally Roadless Area includes approximately 22 sq mi in the Shasta-Trinity National Forest, Trinity County, California. A mineral survey indicates that an area of less than 1 sq mi in the northern part of the Weaver Bally Roadless Area has a substantiated mineral-resource potential for gold and silver; a much larger area has a probable mineral-resource potential for the same elements. The geologic terrane precludes the occurrence of fossil fuel resources and there is little promise for the occurrence of additional metallic, energy, or nonmetallic resources in the roadless area. Detailed studies, including further geochemical sampling and drilling could be done in the region of the Globe mines. In addition, the outcrops of dacite porphyry dikes and sills and associated hydrothermal alteration should be mapped in detail.

The Current State of Additive Manufacturing in Wind Energy Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mann, Margaret; Palmer, Sierra; Lee, Dominic

Wind power is an inexhaustible form of energy that is being captured throughout the U.S. to power the engine of our economy. A robust, domestic wind industry promises to increase U.S. industry growth and competitiveness, strengthen U.S. energy security independence, and promote domestic manufacturing nationwide. As of 2016, ~82GW of wind capacity had been installed, and wind power now provides more than 5.5% of the nation’s electricity and supports more than 100,000 domestic jobs, including 500 manufacturing facilities in 43 States. To reach the U.S. Department of Energy’s (DOE’s) 2015 Wind Vision study scenario of wind power serving 35% ofmore » the nation's end-use demand by 2050, significant advances are necessary in all areas of wind technologies and market. An area that can greatly impact the cost and rate of innovation in wind technologies is the use of advanced manufacturing, with one of the most promising areas being additive manufacturing (AM). Considering the tremendous promise offered by advanced manufacturing, it is the purpose of this report to identify the use of AM in the production and operation of wind energy systems. The report has been produced as a collaborative effort for the DOE Wind Energy Technology Office (WETO), between Oak Ridge National Laboratory (ORNL) and the National Renewable Energy Laboratory (NREL).« less

Identifying management competencies for health care executives: review of a series of Delphi studies.

PubMed

Hudak, R P; Brooke, P P; Finstuen, K

2000-01-01

This analysis reviews a selected body of research that identifies the essential areas of management expertise required of future health care executives. To ensure consistency, six studies are analyzed, utilizing the Delphi technique, to query a broad spectrum of experts in different fields and sites of health care management. The analysis identifies a number of management competencies, i.e., managerial capabilities, which current and aspiring health care executives, in various settings and with differing educational backgrounds, should possess to enhance the probability of their success in current and future positions of responsibility. In addition, this review identifies the skills (technical expertise), knowledge (facts and principles) and abilities (physical, mental or legal power) required to support achievement of these competencies. Leadership and resource management, including cost and finance dimensions, are the highest-rated requisite management competencies. The dominant skills, knowledge and abilities (SKAs) are related to interpersonal skills. The lowest-rated SKAs are related to job-specific, technical skills. Recommendations include the review of this research by formal and continuing education programs to determine the content of their courses and areas for future research. Similarly, current health care executives should assess this research to assist in identifying competency gaps. Lastly, this analysis recommends that the Delphi technique, as a valid and replicable methodology, be applied toward the study of non-executive health care managers, e.g., students, clinicians, mid-level managers and integrated systems administrators, to determine their requisite management competencies and SKAs.

New Neuroscience Tools That Are Identifying the Sleep-Wake Circuit.

PubMed

Shiromani, Priyattam J; Peever, John H

2017-04-01

The complexity of the brain is yielding to technology. In the area of sleep neurobiology, conventional neuroscience tools such as lesions, cell recordings, c-Fos, and axon-tracing methodologies have been instrumental in identifying the complex and intermingled populations of sleep- and arousal-promoting neurons that orchestrate and generate wakefulness, NREM, and REM sleep. In the last decade, new technologies such as optogenetics, chemogenetics, and the CRISPR-Cas system have begun to transform how biologists understand the finer details associated with sleep-wake regulation. These additions to the neuroscience toolkit are helping to identify how discrete populations of brain cells function to trigger and shape the timing and transition into and out of different sleep-wake states, and how glia partner with neurons to regulate sleep. Here, we detail how some of the newest technologies are being applied to understand the neural circuits underlying sleep and wake. Published by Oxford University Press on behalf of Sleep Research Society (SRS) 2017. This work is written by (a) US Government employee(s) and is in the public domain in the US.

Fracture trends identified by ERTS-1 imagery in Utah and Nevada

NASA Technical Reports Server (NTRS)

Jensen, M. L. (Principal Investigator); Erickson, M. P.; Smith, M. R.

1973-01-01

The author has identified the following significant results. In the Utah-Nevada area, linear structural trends recorded on ERTS-1 imagery conform in part to previously recognized structures. In addition, the ERTS-1 imagery reveals cryptic structures not previously identified and not readily apparent in other imagery. These structures are illustrated by prominent east-west trending structures which appear to be concentrated in pre-volcanic rocks. This suggests that the structures are older than many of those with other trends which are equally prominent in volcanic and non-volcanic terrain. Since the older east-west structures may have controlled early Tertiary emplacement of magma or the ascent of mineralizing fluids, their recognition is important in minerial exploration. Soil-gas sampling and analysis for mercury content is being continued over structures, and projected trends of buried structures which appear, from studies of ERTS-1 imagery, to be favorable to mineralization. Comparison of ERTS-1 and Skylab imagery indicated that ERTS-1 imagery records more previously unrecognized linear structures than the Skylab imagery. In differentiating and identifying different rock types, the Skylab imagery appears to be more effective.

Using Chief Complaint in Addition to Diagnosis Codes to Identify Falls in the Emergency Department.

PubMed

Patterson, Brian W; Smith, Maureen A; Repplinger, Michael D; Pulia, Michael S; Svenson, James E; Kim, Michael K; Shah, Manish N

2017-09-01

To compare incidence of falls in an emergency department (ED) cohort using a traditional International Classification of Diseases, Ninth Revision (ICD-9) code-based scheme and an expanded definition that included chief complaint information and to examine the clinical characteristics of visits "missed" in the ICD-9-based scheme. Retrospective electronic record review. Academic medical center ED. Individuals aged 65 and older seen in the ED between January 1, 2013, and September 30, 2015. Two fall definitions were applied (individually and together) to the cohort: an ICD-9-based definition and a chief complaint definition. Admission rates and 30-day mortality (per encounter) were measured for each definition. Twenty-three thousand eight hundred eighty older adult visits occurred during the study period. Using the most-inclusive definition (ICD-9 code or chief complaint indicating a fall), 4,363 visits (18%) were fall related. Of these visits, 3,506 (80%) met the ICD-9 definition for a fall-related visit, and 2,664 (61%) met the chief complaint definition. Of visits meeting the chief complaint definition, 857 (19.6%) were missed when applying the ICD-9 definition alone. Encounters missed using the ICD-9 definition were less likely to lead to an admission (42.9%, 95% confidence interval (CI) = 39.7-46.3%) than those identified (54.4%, 95% CI = 52.7-56.0%). Identifying individuals in the ED who have fallen based on diagnosis codes underestimates the true burden of falls. Individuals missed according to the code-based definition were less likely to have been admitted than those who were captured. These findings call attention to the value of using chief complaint information to identify individuals who have fallen in the ED-for research, clinical care, or policy reasons. © 2017, Copyright the Authors Journal compilation © 2017, The American Geriatrics Society.

Regional collaboration among Urban Area Security Initiative regions: results of the Johns Hopkins urban area survey.

PubMed

Errett, Nicole A; Bowman, Calvin; Barnett, Daniel J; Resnick, Beth A; Frattaroli, Shannon; Rutkow, Lainie

2014-01-01

Regional collaboration has been identified as a potential facilitator of public health preparedness efforts. The Urban Area Security Initiative (UASI) grant program, administered by the Federal Emergency Management Agency (FEMA) since 2003, has provided 64 high-risk metropolitan areas funding to enhance their regional preparedness capabilities. This study describes informal and formal regional collaboration infrastructure, as well as regional collaboration-related activities and assessment methods, in FFY2010 UASI regions. A cross-sectional online survey was administered via Survey Monkey from September through December 2013. Points of contact from FFY2010 funded UASI metropolitan areas completed the survey, with a response rate of 77.8% (n=49). Summary statistics were calculated to describe the current informal and formal regional collaboration infrastructure. Additionally, the cross-sectional survey collected rates of agreement with 8 collaborative preparedness statements at 3 time points. The survey found that UASI regions are engaging in collaborative activities and investments to build capabilities, with most collaboration occurring in the prevention, protection, and response mission areas. Collaborative relationships in preparedness among emergency managers and municipal chief executive officers improved during the FFY2010 UASI performance period compared to the pre-UASI award period, with lasting effects. The majority of UASI regions reported conducting independent assessments of capabilities and their measurement at the UASI region level. Urban areas that received a FFY2010 UASI grant award are engaging in collaborative activities and have established interjurisdictional relationships in preparedness. The use of grant funds to encourage collaboration in preparedness has the potential to leverage limited resources and promote informed investments.

Regional Collaboration Among Urban Area Security Initiative Regions: Results of the Johns Hopkins Urban Area Survey

PubMed Central

Bowman, Calvin; Barnett, Daniel J.; Resnick, Beth A.; Frattaroli, Shannon; Rutkow, Lainie

2014-01-01

Regional collaboration has been identified as a potential facilitator of public health preparedness efforts. The Urban Area Security Initiative (UASI) grant program, administered by the Federal Emergency Management Agency (FEMA) since 2003, has provided 64 high-risk metropolitan areas funding to enhance their regional preparedness capabilities. This study describes informal and formal regional collaboration infrastructure, as well as regional collaboration–related activities and assessment methods, in FFY2010 UASI regions. A cross-sectional online survey was administered via Survey Monkey from September through December 2013. Points of contact from FFY2010 funded UASI metropolitan areas completed the survey, with a response rate of 77.8% (n=49). Summary statistics were calculated to describe the current informal and formal regional collaboration infrastructure. Additionally, the cross-sectional survey collected rates of agreement with 8 collaborative preparedness statements at 3 time points. The survey found that UASI regions are engaging in collaborative activities and investments to build capabilities, with most collaboration occurring in the prevention, protection, and response mission areas. Collaborative relationships in preparedness among emergency managers and municipal chief executive officers improved during the FFY2010 UASI performance period compared to the pre-UASI award period, with lasting effects. The majority of UASI regions reported conducting independent assessments of capabilities and their measurement at the UASI region level. Urban areas that received a FFY2010 UASI grant award are engaging in collaborative activities and have established interjurisdictional relationships in preparedness. The use of grant funds to encourage collaboration in preparedness has the potential to leverage limited resources and promote informed investments. PMID:25398073

The abilities of new anthropometric indices in identifying cardiometabolic abnormalities, and influence of residence area and lifestyle on these anthropometric indices in a Chinese community-dwelling population.

PubMed

Fu, Shihui; Luo, Leiming; Ye, Ping; Liu, Yuan; Zhu, Bing; Bai, Yongyi; Bai, Jie

2014-01-01

The study aimed to investigate the prevalence of overweight, obesity, and cardiometabolic abnormalities, the influence of residence area, occupation, and lifestyle on new anthropometric indices, and the relationship between anthropometric indices and cardiometabolic abnormalities in a Chinese community-dwelling population. The study included 4,868 residents through a large health check-up program in Beijing. Overall obesity existed in 22.2% of men and 28.1% of women. 67.1% of men and 65.2% of women were overweight. 65.99% of men and 65.97% of women had central obesity. Residents of rural areas, manual workers, and smokers had significantly higher anthropometric indices. The power of each anthropometric index varied for identifying different cardiometabolic abnormalities, and the ability of the waist-to-height ratio to identify participants with greater than one or two cardiometabolic abnormalities was optimal. The appropriate cut-off values of all anthropometric indices for cardiometabolic abnormalities were obtained. Overweight is common for both sexes in the People's Republic of China, as are general and central obesity. Residents of rural areas, manual workers, and smokers have significantly higher anthropometric indices. Waist-to-height ratio has the ability to reflect the compound risk of different cardiometabolic abnormalities and the greatest potential to be widely applied in clinical practice.

Identifying Heat Waves in Florida: Considerations of Missing Weather Data.

PubMed

Leary, Emily; Young, Linda J; DuClos, Chris; Jordan, Melissa M

2015-01-01

Using current climate models, regional-scale changes for Florida over the next 100 years are predicted to include warming over terrestrial areas and very likely increases in the number of high temperature extremes. No uniform definition of a heat wave exists. Most past research on heat waves has focused on evaluating the aftermath of known heat waves, with minimal consideration of missing exposure information. To identify and discuss methods of handling and imputing missing weather data and how those methods can affect identified periods of extreme heat in Florida. In addition to ignoring missing data, temporal, spatial, and spatio-temporal models are described and utilized to impute missing historical weather data from 1973 to 2012 from 43 Florida weather monitors. Calculated thresholds are used to define periods of extreme heat across Florida. Modeling of missing data and imputing missing values can affect the identified periods of extreme heat, through the missing data itself or through the computed thresholds. The differences observed are related to the amount of missingness during June, July, and August, the warmest months of the warm season (April through September). Missing data considerations are important when defining periods of extreme heat. Spatio-temporal methods are recommended for data imputation. A heat wave definition that incorporates information from all monitors is advised.

MX Siting Investigation. Mineral Resources Survey, Seven Additional Valleys, Nevada/Utah Siting Area. Volume I.

DTIC Science & Technology

1981-06-23

Some negative impacts of MX deployment on mining in the study area are unavoidable, but careful planning in water use and actual shelter site...depend upon the extent of deployment and location of shelter sites. A major impact on the mining industry will result if draw-down of the water table...use and acquire the necessary land rights or whether the affected shelter (s) should be abandoned or replaced elsewhere in the deployment area. Egec E-TR

Recent and Late Holocene Alaskan Lake Changes Identified from Water Isotopes

NASA Astrophysics Data System (ADS)

Anderson, L.; Birks, S. J.; Rover, J.; Guldager, N.

2014-12-01

To identify the existence and cause of recent lake area changes in the Yukon Flats, a region of discontinuous permafrost in north central Alaska, we evaluate lake water isotope compositions with remotely sensed imagery and hydroclimatic parameters. Estimates of the ratio of water lost by evaporation to that gained by inflow (E/I) were derived from an isotope-based water balance model. The isotope labels are also used to identify the dominant sources for lakes such as rainfall and snowfall, groundwater, rivers, or thawed permafrost. These parameters are then used in conjunction with climatic data and remotely sensed imagery to identify the patterns and causes of recent lake area changes and for evaluation with lake sediment oxygen isotope records of late Holocene lake water isotope variations. Lake water isotope samples from 83 lakes were acquired in July, August or September between 2007 and 2010 by fixed wing aircraft. An additional set of smaller lakes (n = 33) was sampled by helicopter in September 2009. In July 2011 59 lakes were sampled on foot within five distinct 11.2-km2 areas. River water data used here are previously collected during the months of June through October between 2006 and 2008. Isotope compositions indicate that mixtures of precipitation, river water, and groundwater source ~95% of the studied lakes. The remaining minority are more dominantly sourced by snowmelt and/or permafrost thaw. Isotope-based water balance estimates indicate 58% of lakes lose more than half of inflow by evaporation. For 26% of the lakes studied, evaporative losses exceeded supply. Surface area trend analysis indicates that most lakes were near their maximum extent in the early 1980s during a relatively cool and wet period. Subsequent reductions can be explained by moisture deficits and greater evaporation. Comparison with late Holocene isotope values and trends indicates recent changes are within the range of late Holocene variability. The records indicate a drier and

Additive Construction using Basalt Regolith Fines

NASA Technical Reports Server (NTRS)

Mueller, Robert P.; Sibille, Laurent; Hintze, Paul E.; Lippitt, Thomas C.; Mantovani, James G.; Nugent, Matthew W.; Townsend, Ivan I.

2014-01-01

Planetary surfaces are often covered in regolith (crushed rock), whose geologic origin is largely basalt. The lunar surface is made of small-particulate regolith and areas of boulders located in the vicinity of craters. Regolith composition also varies with location, reflecting the local bedrock geology and the nature and efficiency of the micrometeorite-impact processes. In the lowland mare areas (suitable for habitation), the regolith is composed of small granules (20 - 100 microns average size) of mare basalt and volcanic glass. Impacting micrometeorites may cause local melting, and the formation of larger glassy particles, and this regolith may contain 10-80% glass. Studies of lunar regolith are traditionally conducted with lunar regolith simulant (reconstructed soil with compositions patterned after the lunar samples returned by Apollo). The NASA Kennedy Space Center (KSC) Granular Mechanics & Regolith Operations (GMRO) lab has identified a low fidelity but economical geo-technical simulant designated as Black Point-1 (BP-1). It was found at the site of the Arizona Desert Research and Technology Studies (RATS) analog field test site at the Black Point lava flow in adjacent basalt quarry spoil mounds. This paper summarizes activities at KSC regarding the utilization of BP-1 basalt regolith and comparative work with lunar basalt simulant JSC-1A as a building material for robotic additive construction of large structures. In an effort to reduce the import or in-situ fabrication of binder additives, we focused this work on in-situ processing of regolith for construction in a single-step process after its excavation. High-temperature melting of regolith involves techniques used in glassmaking and casting (with melts of lower density and higher viscosity than those of metals), producing basaltic glass with high durability and low abrasive wear. Most Lunar simulants melt at temperatures above 1100 C, although melt processing of terrestrial regolith at 1500 C is not

Improving the design of amphibian surveys using soil data: A case study in two wilderness areas

USGS Publications Warehouse

Bowen, K.D.; Beever, E.A.; Gafvert, U.B.

2009-01-01

Amphibian populations are known, or thought to be, declining worldwide. Although protected natural areas may act as reservoirs of biological integrity and serve as benchmarks for comparison with unprotected areas, they are not immune from population declines and extinctions and should be monitored. Unfortunately, identifying survey sites and performing long-term fieldwork within such (often remote) areas involves a special set of problems. We used the USDA Natural Resource Conservation Service Soil Survey Geographic (SSURGO) Database to identify, a priori, potential habitat for aquatic-breeding amphibians on North and South Manitou Islands, Sleeping Bear Dunes National Lakeshore, Michigan, and compared the results to those obtained using National Wetland Inventory (NWI) data. The SSURGO approach identified more target sites for surveys than the NWI approach, and it identified more small and ephemeral wetlands. Field surveys used a combination of daytime call surveys, night-time call surveys, and perimeter surveys. We found that sites that would not have been identified with NWI data often contained amphibians and, in one case, contained wetland-breeding species that would not have been found using NWI data. Our technique allows for easy a priori identification of numerous survey sites that might not be identified using other sources of spatial information. We recognize, however, that the most effective site identification and survey techniques will likely use a combination of methods in addition to those described here.

The lost pedestrian: Identifying determinant factors of no-pedestrian phenomenon in the area of Baiturrahman Grand Mosque, Banda Aceh, Indonesia

NASA Astrophysics Data System (ADS)

Nasution, M. A.

2018-03-01

The area of Baiturrahman Grand Mosque in Banda Aceh has a deep meaning for people of Aceh because it is a historical site, which has many historical heritages. Recently, it is rarely seen people walk along the corridor of the town. People always drive to move along the road and stop right on their destination. Some are still walking, but only for 20-30 meter. On the other hand, a number of the vehicle significantly increase followed by the needs of parking space. The intensity of the traffic is high in day time; in the morning, at noon, and in the late afternoon. The research will be conducted using qualitative and quantitative methods; investigating the change of the environment caused by development, disaster, and conflict, interviewing government as the decision maker and public figure, questionnaires, and finding information from official documents and literature. It is necessary to identify the determinant factors of no-pedestrian phenomenon in the area of Banda Aceh because it is expected to create atmosphere, which encourage people to walk along the city center, revive walking habits to urban community, and strengthen the role of city center as a center of activities; praying, shopping, and engaging in recreation and leisure.

Key areas for wintering North American herons

USGS Publications Warehouse

Mikuska, T.; Kushlan, J.A.; Hartley, S.

1998-01-01

Nearly all North American heron populations are migratory, but details of where they winter are little known. Locations where North American herons winter were identified using banding recovery data. North American herons winter from Canada through northern South America but especially in eastern North America south of New York, Florida, California, Louisiana, Texas, Mexico and Cuba, these areas accounting for 63% of winter recoveries. We identified regions where recoveries for various species clustered as "key areas." These forty-three areas constitute a network of areas that hold sites that likely are important to wintering North American herons. Within each area, we identify specific sites that are potentially important to wintering herons. The relative importance of each area and site within the network must be evaluated by further on the ground inventory. Because of biases inherent in the available data, these hypothesized key areas are indicative rather than exhaustive. As a first cut, this network of areas can serve to inform further inventory activities and can provide an initial basis to begin planning for the year-round conservation of North American heron populations.

The functional architectures of addition and subtraction: Network discovery using fMRI and DCM.

PubMed

Yang, Yang; Zhong, Ning; Friston, Karl; Imamura, Kazuyuki; Lu, Shengfu; Li, Mi; Zhou, Haiyan; Wang, Haiyuan; Li, Kuncheng; Hu, Bin

2017-06-01

The neuronal mechanisms underlying arithmetic calculations are not well understood but the differences between mental addition and subtraction could be particularly revealing. Using fMRI and dynamic causal modeling (DCM), this study aimed to identify the distinct neuronal architectures engaged by the cognitive processes of simple addition and subtraction. Our results revealed significantly greater activation during subtraction in regions along the dorsal pathway, including the left inferior frontal gyrus (IFG), middle portion of dorsolateral prefrontal cortex (mDLPFC), and supplementary motor area (SMA), compared with addition. Subsequent analysis of the underlying changes in connectivity - with DCM - revealed a common circuit processing basic (numeric) attributes and the retrieval of arithmetic facts. However, DCM showed that addition was more likely to engage (numeric) retrieval-based circuits in the left hemisphere, while subtraction tended to draw on (magnitude) processing in bilateral parietal cortex, especially the right intraparietal sulcus (IPS). Our findings endorse previous hypotheses about the differences in strategic implementation, dominant hemisphere, and the neuronal circuits underlying addition and subtraction. Moreover, for simple arithmetic, our connectivity results suggest that subtraction calls on more complex processing than addition: auxiliary phonological, visual, and motor processes, for representing numbers, were engaged by subtraction, relative to addition. Hum Brain Mapp 38:3210-3225, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

78 FR 60816 - Proposed Directive for Additional Seasonal or Year-Round Recreation Activities at Ski Areas

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-02

... Authorized Officers to ensure that ski area operations comply with Forest Service regulations and permit... significant modifications to topography to facilitate construction or operations. The Agency is also proposing... in the ski area's master development plan; (2) Not compromise snow sports operations or functions...

Evaluation of fisher (Pekania pennanti) restoration in Olympic National Park and the Olympic Recovery Area: 2015 final annual progress report

USGS Publications Warehouse

Happe, Patricia J.; Jenkins, Kurt J.; Kay, Thomas J.; Pilgrim, Kristie; Schwartz, Michael K; Lewis, Jeffrey C.; Aubry, Keith B.

2016-01-01

and 3 new recruits to the population. Three additional fishers were detected with cameras but not DNA, consequently their identities were unknown. All fisher detections were in the target area. Additionally, we identified 46 other species of wildlife at the baited camera stations. We also obtained 4 additional confirmed records of fishers in the study area through photographs provided by the public and incidental live capture. During 2016, we plan to resample 69 hexagons sampled in the target area in 2014 and 12 new hexes in the expansion area. In addition, we plan to sample non-selected hexes in-between hexes where we had a cluster of fishers in 2014, to provide better understanding of occupancy patterns and minimum number of individuals in an area where fishers appear to be concentrating.

76 FR 60358 - Gypsy Moth Generally Infested Areas; Additions in Indiana, Maine, Ohio, Virginia, West Virginia...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-29

... Virginia, and Wisconsin AGENCY: Animal and Plant Health Inspection Service, USDA. ACTION: Affirmation of... amended the regulations to add areas in Indiana, Maine, Ohio, Virginia, West Virginia, and Wisconsin to..., West Virginia, and Wisconsin to the list of generally infested areas. \\1\\ To view the interim rule and...

Predicting tree species presence and basal area in Utah: A comparison of stochastic gradient boosting, generalized additive models, and tree-based methods

USGS Publications Warehouse

Moisen, Gretchen G.; Freeman, E.A.; Blackard, J.A.; Frescino, T.S.; Zimmermann, N.E.; Edwards, T.C.

2006-01-01

Many efforts are underway to produce broad-scale forest attribute maps by modelling forest class and structure variables collected in forest inventories as functions of satellite-based and biophysical information. Typically, variants of classification and regression trees implemented in Rulequest's?? See5 and Cubist (for binary and continuous responses, respectively) are the tools of choice in many of these applications. These tools are widely used in large remote sensing applications, but are not easily interpretable, do not have ties with survey estimation methods, and use proprietary unpublished algorithms. Consequently, three alternative modelling techniques were compared for mapping presence and basal area of 13 species located in the mountain ranges of Utah, USA. The modelling techniques compared included the widely used See5/Cubist, generalized additive models (GAMs), and stochastic gradient boosting (SGB). Model performance was evaluated using independent test data sets. Evaluation criteria for mapping species presence included specificity, sensitivity, Kappa, and area under the curve (AUC). Evaluation criteria for the continuous basal area variables included correlation and relative mean squared error. For predicting species presence (setting thresholds to maximize Kappa), SGB had higher values for the majority of the species for specificity and Kappa, while GAMs had higher values for the majority of the species for sensitivity. In evaluating resultant AUC values, GAM and/or SGB models had significantly better results than the See5 models where significant differences could be detected between models. For nine out of 13 species, basal area prediction results for all modelling techniques were poor (correlations less than 0.5 and relative mean squared errors greater than 0.8), but SGB provided the most stable predictions in these instances. SGB and Cubist performed equally well for modelling basal area for three species with moderate prediction success

[Utility of chromosome banding with ALU I enzyme for identifying methylated areas in breast cancer].

PubMed

Rojas-Atencio, Alicia; Yamarte, Leonard; Urdaneta, Karelis; Soto-Alvarez, Marisol; Alvarez Nava, Francisco; Cañizalez, Jenny; Quintero, Maribel; Atencio, Raquel; González, Richard

2012-12-01

Cancer is a group of disorders characterized by uncontrolled cell growth which is produced by two successive events: increased cell proliferation (tumor or neoplasia) and the invasive capacity of these cells (metastasis). DNA methylation is an epigenetic process which has been involved as an important pathogenic factor of cancer. DNA methylation participates in the regulation of gene expression, directly, by preventing the union of transcription factors, and indirectly, by promoting the "closed" structure of the chromatine. The objectives of this study were to identify hypermethyled chromosomal regions through the use of restriction Alu I endonuclease, and to relate cytogenetically these regions with tumor suppressive gene loci. Sixty peripheral blood samples of females with breast cancer were analyzed. Cell cultures were performed and cytogenetic spreads, previously digested with Alu I enzyme, were stained with Giemsa. Chromosomal centromeric and not centromeric regions were stained in 37% of cases. About 96% of stained hypermethyled chromosomal regions (1q, 2q, 6q) were linked with methylated genes associated with breast cancer. In addition, centromeric regions in chromosomes 3, 4, 8, 13, 14, 15 and 17, usually unstained, were found positive to digestion with Alu I enzime and Giemsa staining. We suggest the importance of this technique for the global visualization of the genome which can find methylated genes related to breast cancer, and thus lead to a specific therapy, and therefore a better therapeutic response.

MAROON BELLS-SNOWMASS WILDERNESS AND ADDITIONS, COLORADO.

USGS Publications Warehouse

Freeman, Val L.; Weisner, Robert C.

1984-01-01

The Maroon Bells-Snowmass Wilderness and Additions, located in western Colorado, was examined for mineral potential. Evidence of mineralization is widespread and numerous areas have either probable or substantiated mineral-resource potential for one or more of the following metals: gold, silver, lead, zinc, copper, and molybdenum. In addition, part of the wilderness has substantiated coal resource potential. There is little promise for the occurrence of oil and gas or geothermal resources.

Study area evaluations. Volume 6-H. North plants study area exposure assessment version 4. 1. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

The objectives of the Human Health Exposure Assessment include: (1) estimate the type and magnitude of exposures to contaminants; (2) Identify contaminants of concern; (3) Identify sites for remedial action; (4) Recommend sites for the no action remedial alternative; and (5) Provide a basis for detailed characterization of the risk associated with all sites. This document consists of the following: An executive summary. Vol I - Land use and exposed population evaluations. Vol. II III - Toxicity assessment (includes army and shell toxicity profiles). Vol. IV - PPLV Methodology. Vol. V - PPLV Calculations. Vol. VI - Study area exposuremore » analysis A introduction, B Western study ares, C Southern study area, D northern Central study area, E Central study area, F Eastern study area, G South plants study area, and H North plants study area. Vol. VII - Summary exposure assessment.« less

Identifying Emerging Hybrid Adversaries

DTIC Science & Technology

2012-01-01

average 1 hour per response , including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed...SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT Same as Report (SAR) 18. NUMBER OF PAGES 12 19a. NAME OF RESPONSIBLE PERSON a. REPORT...an extended engage- ment area to get into the close fight.4 In addition, they will employ a wide range of capabilities including cyber, social media

[A study of infant mortality rate in Korean rural areas].

PubMed

Cho, Y H

1981-10-31

This study was undertaken in an attempt to identify the level of birth and infant death in the KHDI demonstration areas. The objectives of this study were to collect available information on birth and infant death in the KHDI demonstration areas, and estimate actual levels of birth and infant mortality in these areas. Within these areas, events of birth and death are continuously recorded by the field health workers, such as the Family Folder, maternal health service card, and the infant-child health service card. Study areas included all the KHDI demonstration areas (Hongchon, Okgu, Gunee). However, 2 myons in the Okgu area were excluded from the study areas since there was no community health practitioner assigned there. The data were collected by 24 community health practitioners and 80 community health aides in the 3 demonstration areas, according to the survey format. These health workers examined and searched existing records. After filling out the survey questionnaires, these health workers made contact with village health workers, "Li" chiefs, mother's club chiefs, or Saemaul leaders at the village level in order that they might gather additional information on possible items which were omitted. Afterwards, health workers made home visits to selected households which were known to have had births or deaths during the 1 year period between January-December 1979. A review of the activities of the health workers during this study indicated that professional survey workers were needed. In addition, 8 surveyors were employed and trained by KHDI to strengthen field survey efforts; they were dispatched to Hongchon and Okgu for 17 days. A total number of 3302 live births and 120 infant deaths were recorded during 1979. All data collected were tabulated by manual counting in the KHDI office. Infant mortality was estimated to be 36.34/1000 births in the demonstration areas during 1979 (rate in Hongchon Gun was 34.5, 31.0 in Okgu Gun, and 46.2 in Gunee Gun). (author's)

Design and fabrication of the progressive addition lenses

NASA Astrophysics Data System (ADS)

Qin, Linling; Qian, Lin; Yu, Jingchi

2011-11-01

The use of progressive addition lenses (PALs) for the correction of presbyopia has increased dramatically in recent years. These lenses are now being used as the preferred alternative to bifocal and trifocal lenses in many parts of the world. Progressive addition lenses are a kind of opthalmic lenses with freeform surface. The surface curvature of the Progressive addition lenses varies gradually from a minimum value in the upper area, to a maximum value in the lower area. Thus a PAL has a surface with three zones which have very small astigmatism: far-view zone, near-view zone, and intermediate zone. The far view zone and near view zone have relatively constant powers and connected by the intermediate zone with power varies progressively. The design and fabrication technologies of progressive addition lenses have fast progresses because of the massive development of the optical simulation software, multi-axis ultraprecision machining technologies and CNC machining technologies. The design principles of progressive addition lenses are discussed in a historic review. Several kinds of design methods are illustrated, and their advantages and disadvantages are also represented. In the current study, it is shown that the optical characteristics of the different progressive addition lenses designs are significantly different from one another. The different fabrication technologies of Progressive addition lenses are also discussed in the paper. Plastic injection molding and precision-machine turning are the common fabrication technologies for exterior PALs and Interior PALs respectively.

Revegetation increase bird diversity in coastal area of Socorejo, Tuban, East Java - Indonesia

NASA Astrophysics Data System (ADS)

Lestari, Yeni Indah; Edi, Wasito; Alivvy, Alkautsar; Ibadah, Acib Setia; Sari, Fadina Yuliana; Nuraini, Finda; Yanuar, Ahmad; Satriyono, Agus; Riany, Citra Fitrie; Saptarini, Dian; Muzaki, Farid Kamal

2017-06-01

Study to address positive impact of revegetation program to increasing diversity of bird had been conducted in coastal area of Socorejo, Tuban - Indonesia. Field observation conducted during April 2011 (representing pre-revegetation period), April 2015 and May 2016 (representing post-revegetation period). A belt transect (500 meter long and 50 meter width) was used to survey the abundance and species composition of birds community. In general, we identified at least 51 bird species from three observation times. From 2011 to 2016, the numbers of the birds identified are 23, 37 and 37 species; while the Shannon-Wiener diversity indices (H') are 1.865, 2.071 and 2.957, respectively. In addition, there are 11 national or internationally protected species, 3 Indonesian endemic species and 12 migratory species occurred in the area. As a conclusion, the coastal revegetation program provides positive impact by generating habitat function for bird community.

Trace elements of concern affecting urban agriculture in industrialized areas: A multivariate approach.

PubMed

Boente, C; Matanzas, N; García-González, N; Rodríguez-Valdés, E; Gallego, J R

2017-09-01

The urban and peri-urban soils used for agriculture could be contaminated by atmospheric deposition or industrial releases, thus raising concerns about the potential risk to public health. Here we propose a method to evaluate potential soil pollution based on multivariate statistics, geostatistics (kriging), a novel soil pollution index, and bioavailability assessments. This approach was tested in two districts of a highly populated and industrialized city (Gijón, Spain). The soils showed anomalous content of several trace elements, such as As and Pb (up to 80 and 585 mg kg -1 respectively). In addition, factor analyses associated these elements with anthropogenic activity, whereas other elements were attributed to natural sources. Subsequent clustering also facilitated the differentiation between the northern area studied (only limited Pb pollution found) and the southern area (pattern of coal combustion, including simultaneous anomalies of trace elements and benzo(a)pyrene). A normalized soil pollution index (SPI) was calculated by kriging, using only the elements falling above threshold levels; therefore point-source polluted zones in the northern area and diffuse contamination in the south were identified. In addition, in the six mapping units with the highest SPIs of the fifty studied, we observed low bioavailability for most of the elements that surpassed the threshold levels. However, some anomalies of Pb contents and the pollution fingerprint in the central area of the southern grid call for further site-specific studies. On the whole, the combination of a multivariate (geo) statistic approach and a bioavailability assessment allowed us to efficiently identify sources of contamination and potential risks. Copyright © 2017 Elsevier Ltd. All rights reserved.

VASQUEZ PEAK WILDERNESS STUDY AREA, AND ST. LOUIS PEAK, AND WILLIAMS FORK ROADLESS AREAS, COLORADO.

USGS Publications Warehouse

Theobald, P.K.; Bielski, A.M.

1984-01-01

A mineral-resource survey was conducted during the years 1979-82 in the Vasquez Peak Wilderness Study Area and in the St. Louis Peak and Williams Fork Roadless Areas, central Front Range, Colorado. Probable resource potential for the occurrence of copper, lead, zinc, and silver in massive sulfide deposits has been identified in calcareous metamorphic rocks in the northern part of the St. Louis Peak Roadless Area and in the southern part of the Williams Fork Roadless Area. A probable resource potential for vein-type uranium deposits is identified along the Berthoud Pass fault zone in the eastern part of the Vasquez Peak Wilderness Study Area. A large area encompassing the eastern and southeastern part of each of the three areas has probable and substantiated potential for either high-grade lead-zinc-silver vein deposits, or larger, lower-grade clustered vein deposits. A probable resource potential for stockwork molybdenum deposits related to porphyry molybdenum type mineralization exists beneath the lead-zinc-silver-rich veins. The nature of the geologic terrane indicates little likelihood for the occurrence of organic fuels.

Identifying pollination service hotspots and coldspots using citizen science data from the Great Sunflower Project

NASA Astrophysics Data System (ADS)

LeBuhn, G.; Schmucki, R.

2016-12-01

Identifying the spatial patterns of pollinator visitation rates is key to identifying the drivers of differences in pollination service and the areas where pollinator conservation will provide the highest return on investment. However, gathering pollinator abundance data at the appropriate regional and national scales is untenable. As a surrogate, habitat models have been developed to identify areas of pollinator losses but these models have been developed using expert opinion based on foraging and nesting requirements. Thousands of citizen scientists across the United States participating in The Great Sunflower Project (www.GreatSunflower.org) contribute timed counts of pollinator visits to a focal sunflower variety planted in local gardens and green spaces. While these data provide a more direct measure of pollination service to a standardized plant and include a measure of effort, the data are complicated. Each location is sampled at different dates, times and frequencies as well as different points across the local flight season. To overcome this complication, we have used a generalized additive model to generate regional flight curves to calibrate each individual data point and to attain better estimates of pollination service at each site. Using these flight season corrected data, we identify hotspots and cold spots in pollinator service across the United States, evaluate the drivers shaping the spatial patterns and observe how these data align with the results obtained from predictive models that are based on expert knowledge on foraging and nesting habitats.

21 CFR 70.5 - General restrictions on use of color additives.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 1 2011-04-01 2011-04-01 false General restrictions on use of color additives. 70... GENERAL COLOR ADDITIVES General Provisions § 70.5 General restrictions on use of color additives. (a) Color additives for use in the area of the eye. No listing or certification of a color additive shall be...

Build platform that provides mechanical engagement with additive manufacturing prints

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elliott, Amelia M.

A build platform and methods of fabricating an article with such a platform in an extrusion-type additive manufacturing machine are provided. A platform body 202 includes features 204 that extend outward from the body 202. The features 204 define protrusive areas 206 and recessive areas 208 that cooperate to mechanically engage the extruded material that forms the initial layers 220 of an article when the article is being fabricated by a nozzle 12 of the additive manufacturing machine 10.

Identifying state resources and support programs on e-government websites for persons with intellectual and developmental disabilities.

PubMed

Fisher, Kathleen M; Peterson, Justin D; Albert, Jon D

2015-01-01

This descriptive cross-sectional study identified resources and programs that are available nationwide on the Internet to support individuals and families with intellectual and developmental disabilities (I/DD), with a focus on intellectual disability. This evaluation included easily identifiable information on specific resources and highlighted unique programs found in individual states that were linked from e-government websites. Researchers documented the ease of access and available information for all 50 states and the District of Columbia. A number of disparities and areas for improvement were recorded for states and I/DD websites. The researchers conclude that a number of additional health and support services will be needed to address the growing needs of this vulnerable population.

The abilities of new anthropometric indices in identifying cardiometabolic abnormalities, and influence of residence area and lifestyle on these anthropometric indices in a Chinese community-dwelling population

PubMed Central

Fu, Shihui; Luo, Leiming; Ye, Ping; Liu, Yuan; Zhu, Bing; Bai, Yongyi; Bai, Jie

2014-01-01

Objective The study aimed to investigate the prevalence of overweight, obesity, and cardiometabolic abnormalities, the influence of residence area, occupation, and lifestyle on new anthropometric indices, and the relationship between anthropometric indices and cardiometabolic abnormalities in a Chinese community-dwelling population. Methods The study included 4,868 residents through a large health check-up program in Beijing. Results Overall obesity existed in 22.2% of men and 28.1% of women. 67.1% of men and 65.2% of women were overweight. 65.99% of men and 65.97% of women had central obesity. Residents of rural areas, manual workers, and smokers had significantly higher anthropometric indices. The power of each anthropometric index varied for identifying different cardiometabolic abnormalities, and the ability of the waist-to-height ratio to identify participants with greater than one or two cardiometabolic abnormalities was optimal. The appropriate cut-off values of all anthropometric indices for cardiometabolic abnormalities were obtained. Conclusion Overweight is common for both sexes in the People’s Republic of China, as are general and central obesity. Residents of rural areas, manual workers, and smokers have significantly higher anthropometric indices. Waist-to-height ratio has the ability to reflect the compound risk of different cardiometabolic abnormalities and the greatest potential to be widely applied in clinical practice. PMID:24477219

Test and Evaluation of Ultrasonic Additive Manufacturing (UAM) for a Large Aircraft Maintenance Shelter (LAMS) Baseplate

DTIC Science & Technology

2015-03-26

TEST AND EVALUATION OF ULTRASONIC ADDITIVE MANUFACTURING (UAM) FOR A LARGE AREA MAINTENANCE...States Government. AFIT-ENV-MS-15-M-158 TEST AND EVALUATION OF ULTRASONIC ADDITIVE MANUFACTURING FOR A LARGE AREA MAINTENANCE SHELTER...Civil Engineer (CE) operations. This research replicates a Large Area Maintenance Shelter (LAMS) baseplate design for ultrasonic additive

Geological applications of LANDSAT-1 imagery to the Great Salt Lake area

NASA Technical Reports Server (NTRS)

Anderson, A. T.; Smith, A. F.

1975-01-01

The ERTS program has been designed as a research and development tool to demonstrate that remote sensing from orbital altitudes is a feasible and practical approach to efficient management of earth resources. From this synoptic view and repetitive coverage provided by ERTS imagery of the Great Salt Lake area, large geological and structural features, trends, and patterns have been identified and mapped. A comparative analysis of lineaments observed in September and December data was conducted, existing mineral locations were plotted, and areas considered prospective for mineralization based on apparent structure-mineralization relationships were defined. The additional information obtained using ERTS data provides an added source of information to aid in the development of more effective mineral exploration programs.

Identifying fish diversity hot-spots in data-poor situations.

PubMed

Fonseca, Vinícius Prado; Pennino, Maria Grazia; de Nóbrega, Marcelo Francisco; Oliveira, Jorge Eduardo Lins; de Figueiredo Mendes, Liana

2017-08-01

One of the more challenging tasks in Marine Spatial Planning (MSP) is identifying critical areas for management and conservation of fish stocks. However, this objective is difficult to achieve in data-poor situations with different sources of uncertainty. In the present study we propose a combination of hierarchical Bayesian spatial models and remotely sensed estimates of environmental variables to be used as flexible and reliable statistical tools to identify and map fish species richness and abundance hot-spots. Results show higher species aggregates in areas with higher sea floor rugosity and habitat complexity, and identify clear richness hot-spots. Our findings identify sensitive habitats through essential and easy-to-use interpretation tools, such as predictive maps, which can contribute to improving management and operability of the studied data-poor situations. Copyright © 2017 Elsevier Ltd. All rights reserved.

Cooperative geochemical investigation of geothermal resources in the Imperial Valley and Yuma areas. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coplen, T.B.

1973-10-01

Preliminary studies indicate that the Imperial Valley has a large geothermal potential. In order to delineate additional geothermal systems a chemical and isotopic investigation of samples from water wells, springs, and geothermal wells in the Imperial Valley and Yuma areas was conducted. Na, K, and Ca concentrations of nearly 200 well water, spring water, hot spring, and geothermal fluid samples from the Imperial Valley area were measured by atomic absorption spectrophotometry. Fournier and Truesdell's function was determined for each water sample. Suspected geothermal areas are identified. Hydrogen and oxygen isotope abundances were determined in order to determine and to identifymore » the source of the water in the Mesa geothermal system. (JGB)« less

COMBUSTION AREA SOURCES: DATA SOURCES

EPA Science Inventory

The report identifies, documents, and evaluates data sources for stationary area source emissions, including solid waste and agricultural burning. Area source emissions of particulate matter, sulfur dioxide, oxides of nitrogen, reactive volatile organic compounds, and carbon mon...

Genetic Susceptibility to Vitiligo: GWAS Approaches for Identifying Vitiligo Susceptibility Genes and Loci

PubMed Central

Shen, Changbing; Gao, Jing; Sheng, Yujun; Dou, Jinfa; Zhou, Fusheng; Zheng, Xiaodong; Ko, Randy; Tang, Xianfa; Zhu, Caihong; Yin, Xianyong; Sun, Liangdan; Cui, Yong; Zhang, Xuejun

2016-01-01

Vitiligo is an autoimmune disease with a strong genetic component, characterized by areas of depigmented skin resulting from loss of epidermal melanocytes. Genetic factors are known to play key roles in vitiligo through discoveries in association studies and family studies. Previously, vitiligo susceptibility genes were mainly revealed through linkage analysis and candidate gene studies. Recently, our understanding of the genetic basis of vitiligo has been rapidly advancing through genome-wide association study (GWAS). More than 40 robust susceptible loci have been identified and confirmed to be associated with vitiligo by using GWAS. Most of these associated genes participate in important pathways involved in the pathogenesis of vitiligo. Many susceptible loci with unknown functions in the pathogenesis of vitiligo have also been identified, indicating that additional molecular mechanisms may contribute to the risk of developing vitiligo. In this review, we summarize the key loci that are of genome-wide significance, which have been shown to influence vitiligo risk. These genetic loci may help build the foundation for genetic diagnosis and personalize treatment for patients with vitiligo in the future. However, substantial additional studies, including gene-targeted and functional studies, are required to confirm the causality of the genetic variants and their biological relevance in the development of vitiligo. PMID:26870082

Using Workflow Modeling to Identify Areas to Improve Genetic Test Processes in the University of Maryland Translational Pharmacogenomics Project.

PubMed

Cutting, Elizabeth M; Overby, Casey L; Banchero, Meghan; Pollin, Toni; Kelemen, Mark; Shuldiner, Alan R; Beitelshees, Amber L

Delivering genetic test results to clinicians is a complex process. It involves many actors and multiple steps, requiring all of these to work together in order to create an optimal course of treatment for the patient. We used information gained from focus groups in order to illustrate the current process of delivering genetic test results to clinicians. We propose a business process model and notation (BPMN) representation of this process for a Translational Pharmacogenomics Project being implemented at the University of Maryland Medical Center, so that personalized medicine program implementers can identify areas to improve genetic testing processes. We found that the current process could be improved to reduce input errors, better inform and notify clinicians about the implications of certain genetic tests, and make results more easily understood. We demonstrate our use of BPMN to improve this important clinical process for CYP2C19 genetic testing in patients undergoing invasive treatment of coronary heart disease.

Using Workflow Modeling to Identify Areas to Improve Genetic Test Processes in the University of Maryland Translational Pharmacogenomics Project

PubMed Central

Cutting, Elizabeth M.; Overby, Casey L.; Banchero, Meghan; Pollin, Toni; Kelemen, Mark; Shuldiner, Alan R.; Beitelshees, Amber L.

2015-01-01

Delivering genetic test results to clinicians is a complex process. It involves many actors and multiple steps, requiring all of these to work together in order to create an optimal course of treatment for the patient. We used information gained from focus groups in order to illustrate the current process of delivering genetic test results to clinicians. We propose a business process model and notation (BPMN) representation of this process for a Translational Pharmacogenomics Project being implemented at the University of Maryland Medical Center, so that personalized medicine program implementers can identify areas to improve genetic testing processes. We found that the current process could be improved to reduce input errors, better inform and notify clinicians about the implications of certain genetic tests, and make results more easily understood. We demonstrate our use of BPMN to improve this important clinical process for CYP2C19 genetic testing in patients undergoing invasive treatment of coronary heart disease. PMID:26958179

Dartmouth Atlas Area-Level Estimates of End-of-Life Expenditures: How Well Do They Reflect Expenditures for Prospectively Identified Advanced Lung Cancer Patients?

PubMed

Keating, Nancy L; Landrum, Mary Beth; Huskamp, Haiden A; Kouri, Elena M; Prigerson, Holly G; Schrag, Deborah; Maciejewski, Paul K; Hornbrook, Mark C; Haggstrom, David A

2016-08-01

Assess validity of the retrospective Dartmouth hospital referral region (HRR) end-of-life spending measures by comparing with health care expenditures from diagnosis to death for prospectively identified advanced lung cancer patients. We calculated health care spending from diagnosis (2003-2005) to death or through 2011 for 885 patients aged ≥65 years with advanced lung cancer using Medicare claims. We assessed the association between Dartmouth HRR-level spending in the last 2 years of life and patient-level spending using linear regression with random HRR effects, adjusting for patient characteristics. For each $1 increase in the Dartmouth metric, spending for our cohort increased by $0.74 (p < .001). The Dartmouth spending variable explained 93.4 percent of the HRR-level variance in observed spending. HRR-level spending estimates for deceased patient cohorts reflect area-level care intensity for prospectively identified advanced lung cancer patients. © Health Research and Educational Trust.

Relaxation of Summer Gasoline Volatility Standard for Florida and the Raleigh-Durham-Chapel Hill Area (Triangle Area) and the Greensboro/Winston-Salem/High Point Area (Triad Area) in North Carolina Additional Resources

EPA Pesticide Factsheets

Federal Registers and fact sheets about EPA approving a request from Florida to relax the federal Reid Vapor Pressure standard applicable to gasoline introduced into commerce in the Miami, Tampa and Jacksonville areas.

Notice of Final Rulemaking: Regulation of Fuel and Fuel Additives: Reformulated Gasoline Requirements for the Atlanta Covered Area

EPA Pesticide Factsheets

This page summaries the final rule determining that the Atlanta metro area is no longer a federal reformulated gasoline (RFG) covered area and there is no requirement to use federal RFG in the Atlanta area.

Application of spatial methods to identify areas with lime requirement in eastern Croatia

NASA Astrophysics Data System (ADS)

Bogunović, Igor; Kisic, Ivica; Mesic, Milan; Zgorelec, Zeljka; Percin, Aleksandra; Pereira, Paulo

2016-04-01

With more than 50% of acid soils in all agricultural land in Croatia, soil acidity is recognized as a big problem. Low soil pH leads to a series of negative phenomena in plant production and therefore as a compulsory measure for reclamation of acid soils is liming, recommended on the base of soil analysis. The need for liming is often erroneously determined only on the basis of the soil pH, because the determination of cation exchange capacity, the hydrolytic acidity and base saturation is a major cost to producers. Therefore, in Croatia, as well as some other countries, the amount of liming material needed to ameliorate acid soils is calculated by considering their hydrolytic acidity. For this research, several interpolation methods were tested to identify the best spatial predictor of hidrolitic acidity. The purpose of this study was to: test several interpolation methods to identify the best spatial predictor of hidrolitic acidity; and to determine the possibility of using multivariate geostatistics in order to reduce the number of needed samples for determination the hydrolytic acidity, all with an aim that the accuracy of the spatial distribution of liming requirement is not significantly reduced. Soil pH (in KCl) and hydrolytic acidity (Y1) is determined in the 1004 samples (from 0-30 cm) randomized collected in agricultural fields near Orahovica in eastern Croatia. This study tested 14 univariate interpolation models (part of ArcGIS software package) in order to provide most accurate spatial map of hydrolytic acidity on a base of: all samples (Y1 100%), and the datasets with 15% (Y1 85%), 30% (Y1 70%) and 50% fewer samples (Y1 50%). Parallel to univariate interpolation methods, the precision of the spatial distribution of the Y1 was tested by the co-kriging method with exchangeable acidity (pH in KCl) as a covariate. The soils at studied area had an average pH (KCl) 4,81, while the average Y1 10,52 cmol+ kg-1. These data suggest that liming is necessary

Using the Hestia bottom-up FFCO2 emissions estimation to identify drivers and hotspots in urban areas

NASA Astrophysics Data System (ADS)

Rao, P.; Patarasuk, R.; Gurney, K. R.; o'Keefe, D.; Song, Y.; Huang, J.; Buchert, M.; Lin, J. C.; Mendoza, D. L.; Ehleringer, J. R.; Eldering, A.; Miller, C. E.; Duren, R. M.

2015-12-01

Urban areas occupy 3% of the earth's land surface and generate 75% of the fossil fuel carbon dioxide (FFCO2) emissions. We report on the application of the Hestia Project to the Salt Lake County (SLC) and Los Angeles (LA) domains. Hestia quantifies FFCO2 in fine space-time detail across urban domains using a scientific "bottom-up" approach. We explore the utility of the Hestia to inform both urbanization science and greenhouse gas (GHG) mitigation policy. We focus on the residential sector in SLC and the onroad sector in LA as these sectors are large emissions contributors in each locale, and local governments have some authority and policy levers to mitigate these emissions. Multiple regression using sociodemographic data across SLC census block-groups shows that per capita income exhibits a positive relationship with FFCO2 emissions while household size exhibits a negative relationship, after controlling for total population. Housing units per area (i.e., compact development) has little effect on FFCO2 emissions. Rising income in the high-income group has twice as much impact on the emissions as the low-income group. Household size for the low-income group has four times the impact on the emissions as the high-income group. In LA, onroad FFCO2 emissions account for 49% of total emissions, of which 41% is from arterials (intermediate road class). Arterials also have the largest carbon emissions intensity - FFCO2/vehicle distance travelled (VKT) - possibly from high traffic congestion and fleet composition. Non-interstate hotspot emissions (> 419 tC ln-km-1) are equally dominated by particular arterials and collectors (lowest road class) though collectors have a higher VKT. These hotspots occur largely in LA (67%) and Orange (18%) counties and provide targeted information for onroad emissions reduction. Using Hestia to identify FFCO2 emissions drivers and hotpots can aid state and local policy makers in planning the most effective GHG reductions.

Contributions of identifiable neurons and neuron classes to lamprey vertebrate neurobiology.

PubMed

Buchanan, J T

2001-03-01

Among the advantages offered by the lamprey brainstem and spinal cord for studies of the structure and function of the nervous system is the unique identifiability of several pairs of reticulospinal neurons in the brainstem. These neurons have been exploited in investigations of the patterns of sensory input to these cells and the patterns of their outputs to spinal neurons, but no doubt these cells could be used much more effectively in exploring their roles in descending control of the spinal cord. The variability of cell positions of neurons in the spinal cord has precluded the recognition of unique spinal neurons. However, classes of nerve cells can be readily defined and characterized within the lamprey spinal cord and this has led to progress in understanding the cellular and synaptic mechanisms of locomotor activity. In addition, both the identifiable reticulospinal cells and the various spinal nerve cell classes and their known synaptic interactions have been used to demonstrate the degree and specificity of regeneration within the lamprey nervous system. The lack of uniquely identifiable cells within the lamprey spinal cord has hampered progress in these areas, especially in gaining a full understanding of the locomotor network and how neuromodulation of the network is accomplished.

Infrared Preheating to Enhance Interlayer Strength of Components Printed on the Big Area Additive Manufacturing (BAAM) System

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kishore, Vidya; Ajinjeru, Christine; Duty, Chad E

The Big Area Additive Manufacturing (BAAM) system has the capacity to print structures on the order of several meters at a rate exceeding 50 kg/h, thereby having the potential to significantly impact the production of components in automotive, aerospace and energy sectors. However, a primary issue that limits the functional use of such parts is mechanical anisotropy. The strength of printed parts across successive layers in the build direction (z-direction) is significantly lower than the corresponding in-plane strength (x-y directions). This is largely due to poor bonding between the printed layers as the lower layers cool below the glass transitionmore » temperature (Tg) before the next layer is deposited. This work explores the use of infrared heating to increase the surface temperature of the printed layer just prior to deposition of new material to improve the interlayer strength of the components. The material used in this study was acrylonitrile butadiene styrene (ABS) reinforced with 20% chopped carbon fiber by weight. Significant improvements in z-strength were observed for the parts whose surface temperature was increased from below Tg to close to or above Tg using infrared heating. Parameters such as print speed, nozzle diameter and extrusion temperature were also found to impact the heat input required to enhance interlayer adhesion without significantly degrading the polymer and compromising on surface finish.« less

Terminal addition in a cellular world.

PubMed

Torday, J S; Miller, William B

2018-07-01

Recent advances in our understanding of evolutionary development permit a reframed appraisal of Terminal Addition as a continuous historical process of cellular-environmental complementarity. Within this frame of reference, evolutionary terminal additions can be identified as environmental induction of episodic adjustments to cell-cell signaling patterns that yield the cellular-molecular pathways that lead to differing developmental forms. Phenotypes derive, thereby, through cellular mutualistic/competitive niche constructions in reciprocating responsiveness to environmental stresses and epigenetic impacts. In such terms, Terminal Addition flows according to a logic of cellular needs confronting environmental challenges over space-time. A reconciliation of evolutionary development and Terminal Addition can be achieved through a combined focus on cell-cell signaling, molecular phylogenies and a broader understanding of epigenetic phenomena among eukaryotic organisms. When understood in this manner, Terminal Addition has an important role in evolutionary development, and chronic disease might be considered as a form of 'reverse evolution' of the self-same processes. Copyright © 2017. Published by Elsevier Ltd.

MADISON ROADLESS AREA, MONTANA.

USGS Publications Warehouse

Simons, Frank S.; Lambeth, Robert H.

1984-01-01

A mineral-resource survey of the Madison Roadless Area in the Madison Range of southwestern Montana was made. The Madison Roadless Area has demonstrated resources of about 93,000 tons of sillimanite rock at the Placer Creek deposit and of about 83,000 tons of asbestos rock at the Karst deposit. The roadless area also has areas of substantiated phosphate resource potential; much of the phosphate is in thin deeply buried beds. An area near the south edge of the roadless area has a probable resource potential for copper and silver. The concentration of uranium-rich stream-sediment samples in the southwest part of the roadless area suggests that a further attempt to identify the source rocks might be justified.

Identifying Heat Waves in Florida: Considerations of Missing Weather Data

PubMed Central

Leary, Emily; Young, Linda J.; DuClos, Chris; Jordan, Melissa M.

2015-01-01

Background Using current climate models, regional-scale changes for Florida over the next 100 years are predicted to include warming over terrestrial areas and very likely increases in the number of high temperature extremes. No uniform definition of a heat wave exists. Most past research on heat waves has focused on evaluating the aftermath of known heat waves, with minimal consideration of missing exposure information. Objectives To identify and discuss methods of handling and imputing missing weather data and how those methods can affect identified periods of extreme heat in Florida. Methods In addition to ignoring missing data, temporal, spatial, and spatio-temporal models are described and utilized to impute missing historical weather data from 1973 to 2012 from 43 Florida weather monitors. Calculated thresholds are used to define periods of extreme heat across Florida. Results Modeling of missing data and imputing missing values can affect the identified periods of extreme heat, through the missing data itself or through the computed thresholds. The differences observed are related to the amount of missingness during June, July, and August, the warmest months of the warm season (April through September). Conclusions Missing data considerations are important when defining periods of extreme heat. Spatio-temporal methods are recommended for data imputation. A heat wave definition that incorporates information from all monitors is advised. PMID:26619198

SAN RAFAEL PRIMITIVE AREA, CALIFORNIA.

USGS Publications Warehouse

Gower, H.D.

1984-01-01

No mineral-resource potential was identified during studies of the San Rafael Primitive Area, located at the southern end of the Coast Ranges of California. No petroleum has been produced from the area and there is little promise for the occurrence of energy resources. Limestone occurs in the area but also is found in abundance outside the area. Inasmuch as sampling and analytical techniques have improved significantly since this study was completed a restudy of the area using new methodology is possibly warranted.

NASA OSMA NDE Program Additive Manufacturing Foundational Effort

NASA Technical Reports Server (NTRS)

Waller, Jess; Walker, James; Burke, Eric; Wells, Douglas

2016-01-01

NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

47 CFR 101.523 - Service areas.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICES 24 GHz Service and Digital Electronic Message Service § 101.523 Service areas. (a) The service areas for 24 GHz are Economic Areas (EAs) as defined in this paragraph (a). The Bureau of Economic.... See 60 FR 13114 (March 10, 1995). Additionally, there are four FCC-created EA-like areas: (1) Guam and...

Identifying Effective Strategies for Climate Change Education: The Coastal Areas Climate Change Education (CACCE) Partnership Audiences and Activities

NASA Astrophysics Data System (ADS)

Ryan, J. G.; Feldman, A.; Muller-Karger, F. E.; Gilbes, F.; Stone, D.; Plank, L.; Reynolds, C. J.

2011-12-01

Many past educational initiatives focused on global climate change have foundered on public skepticism and disbelief. Some key reasons for these past failures can be drawn directly from recognized best practices in STEM education - specifically, the necessity to help learners connect new knowledge with their own experiences and perspectives, and the need to create linkages with issues or concerns that are both important for and relevant to the audiences to be educated. The Coastal Areas Climate Change Education (CACCE) partnership has sought to follow these tenets as guiding principles in identifying critical audiences and developing new strategies for educating the public living in the low-lying coastal areas of Florida and the Caribbean on the realities, risks, and adaptation and mitigation strategies for dealing with the regional impacts of global climate change. CACCE is currently focused on three key learner audiences: a) The formal education spectrum, targeting K-12 curricula through middle school marine science courses, and student and educator audiences through coursework and participatory research strategies engaging participants in a range of climate-related investigations. b) Informal science educators and outlets, in particular aquaria and nature centers, as an avenue toward K-12 teacher professional development as well as for public education. c) Regional planning, regulatory and business professionals focused on the built environment along the coasts, many of whom require continuing education to maintain licensing and/or other professional certifications. Our current activities are focused on bringing together an effective set of educational, public- and private-sector partners to target the varied needs of these audiences in Florida and the U.S. Caribbean, and tailoring an educational plan aimed at these stakeholder audiences that starts with the regionally and topically relevant impacts of climate change, and strategies for effective adaptation and

Qualitative identification of permitted and non-permitted color additives in cosmetics.

PubMed

Miranda-Bermudez, Enio; Harp, Bhakti Petigara; Barrows, Julie N

2014-01-01

Color additives are dyes, pigments, or other substances that can impart color when added or applied to foods, drugs, cosmetics, medical devices, or the human body. These substances must be pre-approved by the U.S. Food and Drug Administration (FDA) and listed in the Code of Federal Regulations before they may be used in FDA-regulated products. Both domestic and imported cosmetic products sold in interstate commerce fall under FDA jurisdiction, and FDA's district laboratories use a combination of analytical methods for identifying or confirming the presence of potentially violative color additives. We have developed a qualitative method for identifying 29 water- and methanol-soluble color additives in various types of cosmetic products. The color additives are extracted with combinations of methylene chloride, methanol, acetic acid, and water and are identified by LC with photodiode array detection. Estimated LOD values ranged from 0.1 to 1.5 mg/L. A survey of lip products, nail polishes, eye products, blushes, body glitter, face paints, bath products, creams, and toothpastes identified permitted and non-permitted color additives. Our new LC method is intended to supplement the visible spectrophotometry and TLC methods currently used by FDA's district laboratories and will help optimize the use of time, labor, and solvents.

Additional Security Considerations for Grid Management

NASA Technical Reports Server (NTRS)

Eidson, Thomas M.

2003-01-01

The use of Grid computing environments is growing in popularity. A Grid computing environment is primarily a wide area network that encompasses multiple local area networks, where some of the local area networks are managed by different organizations. A Grid computing environment also includes common interfaces for distributed computing software so that the heterogeneous set of machines that make up the Grid can be used more easily. The other key feature of a Grid is that the distributed computing software includes appropriate security technology. The focus of most Grid software is on the security involved with application execution, file transfers, and other remote computing procedures. However, there are other important security issues related to the management of a Grid and the users who use that Grid. This note discusses these additional security issues and makes several suggestions as how they can be managed.

Using the theory of planned behaviour and self-identity to explain chlamydia testing intentions in young people living in deprived areas.

PubMed

Booth, Amy R; Norman, Paul; Harris, Peter R; Goyder, Elizabeth

2014-02-01

The study sought to (1) explain intentions to get tested for chlamydia regularly in a group of young people living in deprived areas using the theory of planned behaviour (TPB); and (2) test whether self-identity explained additional variance in testing intentions. A cross-sectional design was used for this study. Participants (N = 278, 53% male; M = 17.05 years) living in deprived areas of a UK city were recruited from a vocational education setting. Participants completed a self-administered questionnaire, including measures of attitude, injunctive subjective norm, descriptive norm, perceived behavioural control, self-identity, intention and past behaviour in relation to getting tested for chlamydia regularly. The TPB explained 43% of the variance in chlamydia testing intentions with all variables emerging as significant predictors. However, self-identity explained additional variance in intentions (ΔR(2)  = .22) and emerged as the strongest predictor, even when controlling for past behaviour. The study identified the key determinants of intention to get tested for chlamydia regularly in a sample of young people living in areas of increased deprivation: a hard-to-reach, high-risk population. The findings indicate the key variables to target in interventions to promote motivation to get tested for chlamydia regularly in equivalent samples, amongst which self-identity is critical. What is already known on this subject? Young people living in deprived areas have been identified as an at-risk group for chlamydia. Qualitative research has identified several themes in relation to factors affecting the uptake of chlamydia testing, which fit well with the constructs of the Theory of Planned Behaviour (TPB). Identity concerns have also been identified as playing an important part in young people's chlamydia testing decisions. What does this study add? TPB explained 43% of the variance in chlamydia testing intentions and all variables were significant predictors

Choking under Pressure: When an Additional Positive Stereotype Affects Performance for Domain Identified Male Mathematics Students

ERIC Educational Resources Information Center

Rosenthal, Harriet E. S.; Crisp, Richard J.

2007-01-01

This research aimed to establish if the presentation of two positive stereotypes would result in choking under pressure for identified male mathematics students. Seventy-five 16 year old men, who had just commenced their AS-level study, were either made aware of their gender group membership (single positive stereotype), their school group…

Post-Arab Spring Governments in North Africa: Identifying Focus Areas for Economic Advancement

DTIC Science & Technology

2012-09-01

Areas in which improvement is required to create positive change that are specific to the country being studied are thereby determined. The cases ...being studied are thereby determined. The cases of pre-Arab Spring Libya, Tunisia and Egypt were examined in an attempt to provide guidance and focus...to occur in countries wherein authoritarian regimes appear to have, in many cases , stifled economic advancement through corruption, power-hoarding

Eye closure in darkness animates olfactory and gustatory cortical areas.

PubMed

Wiesmann, M; Kopietz, R; Albrecht, J; Linn, J; Reime, U; Kara, E; Pollatos, O; Sakar, V; Anzinger, A; Fesl, G; Brückmann, H; Kobal, G; Stephan, T

2006-08-01

In two previous fMRI studies, it was reported that eyes-open and eyes-closed conditions in darkness had differential effects on brain activity, and typical patterns of cortical activity were identified. Without external stimulation, ocular motor and attentional systems were activated when the eyes were open. On the contrary, the visual, somatosensory, vestibular, and auditory systems were activated when the eyes were closed. In this study, we investigated whether cortical areas related to the olfactory and gustatory system are also animated by eye closure without any other external stimulation. In a first fMRI experiment (n = 22), we identified cortical areas including the piriform cortex activated by olfactory stimulation. In a second experiment (n = 12) subjects lying in darkness in the MRI scanner alternately opened and closed their eyes. In accordance to previous studies, we found activation clusters bilaterally in visual, somatosensory, vestibular and auditory cortical areas for the contrast eyes-closed vs. eyes-open. In addition, we were able to show that cortical areas related to the olfactory and gustatory system were also animated by eye closure. These results support the hypothesis that there are two different states of mental activity: with the eyes closed, an "interoceptive" state characterized by imagination and multisensory activity and with the eyes open, an "exteroceptive" state characterized by attention and ocular motor activity. Our study also suggests that the chosen baseline condition may have a considerable impact on activation patterns and on the interpretation of brain activation studies. This needs to be considered for studies of the olfactory and gustatory system.

Identifying (subsurface) anthropogenic heat sources that influence temperature in the drinking water distribution system

NASA Astrophysics Data System (ADS)

Agudelo-Vera, Claudia M.; Blokker, Mirjam; de Kater, Henk; Lafort, Rob

2017-09-01

The water temperature in the drinking water distribution system and at customers' taps approaches the surrounding soil temperature at a depth of 1 m. Water temperature is an important determinant of water quality. In the Netherlands drinking water is distributed without additional residual disinfectant and the temperature of drinking water at customers' taps is not allowed to exceed 25 °C. In recent decades, the urban (sub)surface has been getting more occupied by various types of infrastructures, and some of these can be heat sources. Only recently have the anthropogenic sources and their influence on the underground been studied on coarse spatial scales. Little is known about the urban shallow underground heat profile on small spatial scales, of the order of 10 m × 10 m. Routine water quality samples at the tap in urban areas have shown up locations - so-called hotspots - in the city, with relatively high soil temperatures - up to 7 °C warmer - compared to the soil temperatures in the surrounding rural areas. Yet the sources and the locations of these hotspots have not been identified. It is expected that with climate change during a warm summer the soil temperature in the hotspots can be above 25 °C. The objective of this paper is to find a method to identify heat sources and urban characteristics that locally influence the soil temperature. The proposed method combines mapping of urban anthropogenic heat sources, retrospective modelling of the soil temperature, analysis of water temperature measurements at the tap, and extensive soil temperature measurements. This approach provided insight into the typical range of the variation of the urban soil temperature, and it is a first step to identifying areas with potential underground heat stress towards thermal underground management in cities.

An overview of zinc addition for BWR dose rate control

DOE Office of Scientific and Technical Information (OSTI.GOV)

Marble, W.J.

1995-03-01

This paper presents an overview of the BWRs employing feedwater zinc addition to reduce primary system dose rates. It identifies which BWRs are using zinc addition and reviews the mechanical injection and passive addition hardware currently being employed. The impact that zinc has on plant chemistry, including the factor of two to four reduction in reactor water Co-60 concentrations, is discussed. Dose rate results, showing the benefits of implementing zinc on either fresh piping surfaces or on pipes with existing films are reviewed. The advantages of using zinc that is isotopically enhanced by the depletion of the Zn-64 precursor tomore » Zn-65 are identified.« less

36 CFR 1280.72 - What additional rules apply for a NARA approved event?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What additional rules apply... ARCHIVES AND RECORDS ADMINISTRATION NARA FACILITIES USE OF NARA FACILITIES What Rules Apply to Use NARA Public Areas in the Washington, DC, Area? General § 1280.72 What additional rules apply for a NARA...

Investigating Conceptual, Procedural, and Intuitive Aspects of Area Measurement with Non-Square Area Units

ERIC Educational Resources Information Center

Miller, Amanda L.

2013-01-01

This dissertation reports the results of a qualitative research project on area measurement. The study utilized structured, task-based interviews with students to (a) investigate the ways students enumerate and structure two-dimensional space with a variety of area units; (b) identify conceptual, procedural, and intuitive aspects of area…

DINKEY LAKES ROADLESS AREA, CALIFORNIA.

USGS Publications Warehouse

Dodge, F.C.W.; Federspiel, F.E.

1984-01-01

The Dinkey Lakes Roadless Area occupies an area of about 184 sq mi on the western slope of the Sierra Nevada, California. The results of a mineral survey show that parts of the area have substantiated resource potential for tungsten and marble and probable resource potential for quartz crystal gemstones. A probable resource potential for geothermal energy exists in one small area. No potential for other metallic mineral or energy resources was identified in this study.

UNCOMPAHGRE PRIMITIVE AREA, COLORADO.

USGS Publications Warehouse

Luedke, R.G.; Sheridan, M.J.

1984-01-01

A mineral-resource study was made of that part of the Uncompahgre National Forest, Colorado constituting the officially designated primitive area. Because the primitive area and its southern border zone contained operating mines producing gold, silver, copper, lead, zinc, and minor amounts of a few other metals, and had been a part of a highly productive mining region, the area was concluded to have large segments of both probable and substantiated mineral-resource potential. No energy resources were identified in the study.

Historical problem areas lessons learned

NASA Technical Reports Server (NTRS)

Sackheim, Bob; Fester, Dale A.

1991-01-01

Historical problem areas in space transportation propulsion technology are identified in viewgraph form. Problem areas discussed include materials compatibility, contamination, pneumatic/feed system flow instabilities, instabilities in rocket engine combustion and fuel sloshing, exhaust plume interference, composite rocket nozzle failure, and freeze/thaw damage.

76 FR 37059 - Siuslaw National Forest; Oregon; Oregon Dunes NRA Management Area 10 (C) Route and Area Designation

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-24

... the 10 (C) area beyond the 3 year standard and guideline timeframe identified in the Plan; [[Page... Management Area 10 (C) Route and Area Designation AGENCY: Forest Service, USDA. ACTION: Notice of intent to... Off Road Vehicle (ORV) routes within Management Area (MA) 10 (C) of the Oregon Dunes National...

75 FR 5715 - Identification of Additional Classes of Facilities for Development of Financial Responsibility...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-04

... addition, the Agency identified the Waste Management and Remediation Services industry (NAICS 562), the... Liability Act (CERCLA). In addition, the Agency identified the Waste Management and Remediation Services...

Operational Area Environmental Evaluations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bailey-White, Brenda Eileen; Nagy, Michael David; Wagner, Katrina Marie

The Operational Area Environmental Evaluation update provides a description of activities that have the potential to adversely affect natural and cultural resources, including soil, air, water, biological, ecological, and historical resources. The environmental sensitivity of an area is evaluated and summarized, which may facilitate informed management decisions as to where development may be prohibited, restricted, or subject to additional requirements.

Additive Manufacturing of Biomaterials, Tissues, and Organs.

PubMed

Zadpoor, Amir A; Malda, Jos

2017-01-01

The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further development of patient-specific healthcare solutions. Customization of many healthcare products and services, such as implants, drug delivery devices, medical instruments, prosthetics, and in vitro models, would have been extremely challenging-if not impossible-without AM technologies. The current special issue of the Annals of Biomedical Engineering presents the latest trends in application of AM techniques to healthcare-related areas of research. As a prelude to this special issue, we review here the most important areas of biomedical research and clinical practice that have benefited from recent developments in additive manufacturing techniques. This editorial, therefore, aims to sketch the research landscape within which the other contributions of the special issue can be better understood and positioned. In what follows, we briefly review the application of additive manufacturing techniques in studies addressing biomaterials, (re)generation of tissues and organs, disease models, drug delivery systems, implants, medical instruments, prosthetics, orthotics, and AM objects used for medical visualization and communication.

Mineral resources of the Castle Peaks Wilderness Study Area, San Bernardino County, California

USGS Publications Warehouse

Miller, David A.W.; Frisken, James G.; Jachens, Robert C.; Gese, Diann D.

1986-01-01

The Castle Peaks Wilderness Study Area (CDCA266) comprises approximately 45,000 acres in the northern New York Mountains, San Bernardino County, California. At the request of the Bureau of Land Management, 39,303 acres of the wilderness study area were studied. The area was investigated during 1982-1985 using combined geologic, geochemical, and geophysical methods. are considered preliminarily suitable for wilderness deignation. There are no mineral reserves or identified resources in the study area. Fluorspar, occurring in sparse veins, has moderate resource potential, as do silver and lead in fault zones, and gold and silver in sparse, high-grade veins and fault breccia. Each area of moderate resource potential encompasses less than one square mile. These same commodities have low resource potential in similar occurrences throughout much of the study area. In addition, there is low resource potential for gold in placer deposits, uranium in altered breccia and gouge, and rare-earth elements in pegmatite dikes. There is no resource potential for oil and gas resources over most of the study area, but the potential is unknown along its western margin. In this report, the area studied is referred to"the wilderness study area", or simply "the study area."

Conductivity enhancement of carbon aerogel by modified gelation using self additive

NASA Astrophysics Data System (ADS)

Singh, Ashish; Kohli, D. K.; Bhartiya, Sushmita; Singh, Rashmi; Rajak, Gaurav; Singh, M. K.; Karnal, A. K.

2018-04-01

Carbon aerogels having high surface area and open pore structure are being studied for many electrochemical applications such as fuel cells and super capacitors. Moderate electrical conductivity of resorcinol - formaldehyde (R-F) derived carbon aerogel limits its utility in these applications. The current manuscript briefs about the synthesis of composite carbon aerogel using carbon aerogel itself as additive during gelation of water based carbon aerogel and study the effect on its conductivity and surface properties. The additive carbon aerogel was synthesized and pre-treated at higher temperature to achieve enhancement in conductivity. The composite carbon aerogel (CCA) samples were characterized for surface area properties, morphology, electrical conductivity and specific capacitance. The surface area properties of CCA showed improvement and specific surface area of ˜1798 m2/g with total pore volume of 1.7 cm3/g. was obtained. The electrical conductivity of the composite carbon aerogel with 5 wt % additive showed improvement over the plain carbon aerogel with respective values of 144 S/m and 128 S/m. The specific capacitance evaluated for CA and CCA are 102 and 118 F/g at scan rate of 10mV/s with improvement of ˜16%.

Functional Intersection Area -- Oregon Department of Transportation

DOT National Transportation Integrated Search

1996-01-01

This discussion paper addresses the concepts involved in defining the functional area of an intersection. The elements which comprise the upstream functional area are identified; dimensions of the upstream area exclusive of queue storage, are given f...

E-Area Vault Concrete Material Property And Vault Durability/Degradation Projection Recommendations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Phifer, M. A.

2014-03-11

Subsequent to the 2008 E-Area Low-Level Waste Facility (ELLWF) Performance Assessment (PA) (WSRC 2008), two additional E-Area vault concrete property testing programs have been conducted (Dixon and Phifer 2010 and SIMCO 2011a) and two additional E-Area vault concrete durability modeling projections have been made (Langton 2009 and SIMCO 2012). All the information/data from these reports has been evaluated and consolidated herein by the Savannah River National Laboratory (SRNL) at the request of Solid Waste Management (SWM) to produce E-Area vault concrete hydraulic and physical property data and vault durability/degradation projection recommendations that are adequately justified for use within associated Specialmore » Analyses (SAs) and future PA updates. The Low Activity Waste (LAW) and Intermediate Level (IL) Vaults structural degradation predictions produced by Carey 2006 and Peregoy 2006, respectively, which were used as the basis for the 2008 ELLWF PA, remain valid based upon the results of the E-Area vault concrete durability simulations reported by Langton 2009 and those reported by SIMCO 2012. Therefore revised structural degradation predictions are not required so long as the mean thickness of the closure cap overlying the vaults is no greater than that assumed within Carey 2006 and Peregoy 2006. For the LAW Vault structural degradation prediction (Carey 2006), the mean thickness of the overlying closure cap was taken as nine feet. For the IL Vault structural degradation prediction (Peregoy 2006), the mean thickness of the overlying closure cap was taken as eight feet. The mean closure cap thicknesses as described here for both E-Area Vaults will be included as a key input and assumption (I&A) in the next revision to the closure plan for the ELLWF (Phifer et al. 2009). In addition, it has been identified as new input to the PA model to be assessed in the ongoing update to the new PA Information UDQE (Flach 2013). Once the UDQE is approved, the SWM Key I

Broca's area processes the hierarchical organization of observed action

PubMed Central

Wakita, Masumi

2014-01-01

Broca's area has been suggested as the area responsible for the domain-general hierarchical processing of language and music. Although meaningful action shares a common hierarchical structure with language and music, the role of Broca's area in this domain remains controversial. To address the involvement of Broca's area in the processing action hierarchy, the activation of Broca's area was measured using near-infrared spectroscopy. Measurements were taken while participants watched silent movies that featured hand movements playing familiar and unfamiliar melodies. The unfamiliar melodies were reversed versions of the familiar melodies. Additionally, to investigate the effect of a motor experience on the activation of Broca's area, the participants were divided into well-trained and less-trained groups. The results showed that Broca's area in the well-trained participants demonstrated a significantly larger activation in response to the hand motion when an unfamiliar melody was played than when a familiar melody was played. However, Broca's area in the less-trained participants did not show a contrast between conditions despite identical abilities of the two participant groups to identify the melodies by watching key pressing actions. These results are consistent with previous findings that Broca's area exhibits increased activation in response to grammatically violated sentences and musically deviated chord progressions as well as the finding that this region does not represent the processing of grammatical structure in less-proficient foreign language speakers. Thus, the current study suggests that Broca's area represents action hierarchy and that sufficiently long motor training is necessary for it to become sensitive to motor syntax. Therefore, the notion that hierarchical processing in Broca's area is a common function shared between language and music may help to explain the role of Broca's area in action perception. PMID:24478668

Identifying sources of B and As contamination in surface water and groundwater downstream of the Larderello geothermal - industrial area (Tuscany-Central Italy)

NASA Astrophysics Data System (ADS)

Grassi, Sergio; Amadori, Michele; Pennisi, Maddalena; Cortecci, Gianni

2014-02-01

A study on the upper reaches of the Cecina River (Tuscany-Central Italy) and the associated unconfined aquifer was carried out from September 2007 to August 2008. The study aimed to identify the sources of B and As contamination in stream water and groundwater, and record contamination levels. The study area, which comprises a northern sector of the Larderello geothermal field, has in time been contaminated by both surface geothermal manifestations (now thought to have ceased) and anthropogenic activity. The latter refers to the disposal of spent geothermal fluids and borogypsum sludge, by-product of colemanite treatment with sulphuric acid, which until the late '70s were discharged in the Larderello area into the Possera Creek, a southern tributary of the Cecina River. A network of 22 stream sections and 9 observation wells was defined. Stream discharge (16 sites), well water levels and chemical concentrations (mainly B, As and anions) in water were measured monthly. Together, discharge and chemical concentrations were used to define the source of contamination by calculating the contaminant load in successive sections of the river network. Due to the stream's intermittent flow, only 50% of the performed monthly surveys could be used in comparing the contaminant load at different sections. Both contaminant loads (referring to median to high flow conditions) and chemical concentrations suggest that B mainly derives from the leakage of a concentrated Na-SO4 water rich in B, SO4, NO3 likely from a small aquitard located in the Larderello area. The B load from this area is about 2 kg/h and increases to approximately 2.7 kg/h in the final section of the study area, likely due to contribution of groundwater. As mainly derives from dissolution and adsorption-desorption processes involving water and As-rich stream bed sediments. Of the total 15 g/h As load measured at the end section, only about 3 g/h derive from the Larderello area. Further to stream bed, As

Data for Known Geothermal Resource Areas (KGRA) and Identified Hydrothermal Resource Areas (IHRA) in Southern Idaho and Southeastern Oregon

DOE Office of Scientific and Technical Information (OSTI.GOV)

Neupane, Ghanashyam; McLing, Travis; Mattson, Earl

The presented database includes water chemistry data and structural rating values for various geothermal features used for performing principal component (PC) and cluster analyses work to identify promising KGRAs and IHRAs in southern Idaho and southeastern Oregon. A brief note on various KGRAs/IHRAs is also included herewith. Results of PC and cluster analyses are presented as a separate paper (Lindsey et al., 2017) that is, as of the time of this submission, in 'revision' status.

WHETSTONE ROADLESS AREA, ARIZONA.

USGS Publications Warehouse

Wrucke, Chester T.; McColly, Robert A.

1984-01-01

A mineral survey conducted has shown that areas in and adjacent to the Whetstone Roadless Area, Arizona have a substantiated resource potential for copper, lead, gold, silver, and quartz, and a probable mineral-resource potential for copper silver, lead, gold, molybdenum, tungsten, uranium, and gypsum. Copper and silver occur in a small vein deposit in the southwestern part of the roadless area. Copper, lead, silver, gold, and molybdenum are known in veins associated with a porphyry copper deposit in a reentrant near the southern border of the roadless area. Vein deposits of tungsten and uranium are possible in the northeast part of the roadless area near areas of known production of these commodities. Demonstrated resources of quartz for smelter flux extend into the roadless area from the Ricketts mine. Areas of probable potential for gypsum resources also occur within the roadless area. No potential for fossil fuel resources was identified in the study.

MOUNT EDDY AND CASTLE CRAGS ROADLESS AREAS, CALIFORNIA.

USGS Publications Warehouse

Peterson, Jocelyn A.; Denton, David K.

1984-01-01

A mineral survey of the Mount Eddy and Castle Crags Roadless Areas, California, shows probable mineral-resource potential for chromite and gold on the basis of local occurrences of these minerals and favorable geologic environment within the roadless areas. There is also geochemical evidence for mineralization, but surface evidence is scant. Although asbestos and copper minerals are present in the areas and the geologic environment is favorable for nickel and platinum-group metals, no resource potential for these was identified. No energy resources were identified in the study of the roadless areas.

Identifying slow-moving landslides using LiDAR DEM and SAR interferometry: An Example of 2006 Meinong Earthquake

NASA Astrophysics Data System (ADS)

Chen, R. F.; Lin, C. W.; Hsu, Y. J.; Zhang, L.; Liang, H. Y.

2017-12-01

The February 6 Meinong Earthquake of 2016 (ML=6.4; at 23.85ºN, 120.81ºE), with a focal depth of 16.7 km, was triggered by an unknown blind thrust in southern Taiwan. The earthquake not only induced coseismic crustal deformation, but also triggered slow-moving landslides nearby the Longchuan active fault. In this study, high-resolution LiDAR derived DEM of 2010 is used to recognize locations of previous slow-moving landslides according to their topographic signatures, such as main escarpment, trench, double ridge, and crown cracks. Within an area of 4.5 km x 1.8 km along Longchuan fault near the ridge of Longchuan mountain, over 50 sites with landslide signatures are recognized, and three of them are over 10 ha. These earthquake-induced landslide deformations are detected from InSAR (synthetic aperture radar interferometry) images using Advanced Land Observing Satellite ALOS2/Phased-array L band and Sentinel 1 C-band SAR (PALSAR) data taken before and after the earthquake; some significant landslide deformation are even overlapped with areas where previous slow moving landslides were identified on the LiDAR DEM. Additionally, field investigation right after the earthquake in the study area also support that these previously identified landslides reactivated in the earthquake. Although these landslides do not cause serious damage due to their minor displacement in the Meinong Earthquake, the study results prove that LiDAR DEM is a powerful tool to identify and continuously monitor slow-motion landslides for preventing catastrophic failures that may be caused by hazardous earthquake or heavy rainfall.

GLACIER BAY NATIONAL MONUMENT WILDERNESS STUDY AREA, ALASKA.

USGS Publications Warehouse

Brew, David A.; Kimball, Arthur L.

1984-01-01

Glacier Bay National Monument is a highly scenic and highly mineralized area about 100 mi west of Juneau, Alaska. Four deposits with demonstrated resources of nickel, copper, zinc, and molybdenum have been identified within the monument and eleven areas of probable or substantiated mineral-resource potential have been identified. The monument is highly mineralized in comparison with most areas of similar size elsewhere in southeastern Alaska, and present estimates of mineral resources are considered conservative.

Delivering patient decision aids on the Internet: definitions, theories, current evidence, and emerging research areas

PubMed Central

2013-01-01

Background In 2005, the International Patient Decision Aids Standards Collaboration identified twelve quality dimensions to guide assessment of patient decision aids. One dimension—the delivery of patient decision aids on the Internet—is relevant when the Internet is used to provide some or all components of a patient decision aid. Building on the original background chapter, this paper provides an updated definition for this dimension, outlines a theoretical rationale, describes current evidence, and discusses emerging research areas. Methods An international, multidisciplinary panel of authors examined the relevant theoretical literature and empirical evidence through 2012. Results The updated definition distinguishes Internet-delivery of patient decision aids from online health information and clinical practice guidelines. Theories in cognitive psychology, decision psychology, communication, and education support the value of Internet features for providing interactive information and deliberative support. Dissemination and implementation theories support Internet-delivery for providing the right information (rapidly updated), to the right person (tailored), at the right time (the appropriate point in the decision making process). Additional efforts are needed to integrate the theoretical rationale and empirical evidence from health technology perspectives, such as consumer health informatics, user experience design, and human-computer interaction. Despite Internet usage ranging from 74% to 85% in developed countries and 80% of users searching for health information, it is unknown how many individuals specifically seek patient decision aids on the Internet. Among the 86 randomized controlled trials in the 2011 Cochrane Collaboration’s review of patient decision aids, only four studies focused on Internet-delivery. Given the limited number of published studies, this paper particularly focused on identifying gaps in the empirical evidence base and

Performance ‘S’ Type Savonius Wind Turbine with Variation of Fin Addition on Blade

NASA Astrophysics Data System (ADS)

Pamungkas, S. F.; Wijayanto, D. S.; Saputro, H.; Widiastuti, I.

2018-01-01

Wind power has been receiving attention as the new energy resource in addressing the ecological problems of burning fossil fuels. Savonius wind rotor is a vertical axis wind turbines (VAWT) which has relatively simple structure and low operating speed. These characteristics make it suitable for areas with low average wind speed as in Indonesia. To identify the performance of Savonius rotor in generating electrical energy, this research experimentally studied the effect of fin addition for the ‘S’ shape of Savonius VAWT. The fin is added to fill the space in the blade in directing the wind flow. This rotor has two turbine blades, a rotor diameter of 1.1 m and rotor height of 1.4 m, used pulley transmission system with 1:4.2 multiplication ratio, and used a generator type PMG 200 W. The research was conducted during dry season by measuring the wind speed in the afternoon. The average wind speed in the area is 2.3 m/s with the maximum of 4.5 m/s. It was found that additional fin significantly increase the ability of Savonius rotor VAWT to generate electrical energy shown by increasing of electrical power. The highest power generated is 13.40 Watt at a wind speed of 4.5 m/s by adding 1 (one) fin in the blade. It increased by 22.71% from the rotor blade with no additional fin. However, increasing number of fins in the blade was not linearly increase the electrical power generated. The wind rotor blade with 4 additional fins is indicated has the lowest performance, generating only 10.80 Watt electrical power, accounted lower than the one generated by no fin-rotor blade. By knowing the effect of the rotor shape, the rotor dimension, the addition of fin, transmission, and generator used, it is possible to determine alternative geometry design in increasing the electrical power generated by Savonius wind turbine.

NORTH ABSAROKA STUDY AREA, MONTANA.

USGS Publications Warehouse

Elliott, J.E.; Stotelmeyer, R.B.

1984-01-01

A mineral survey of the North Absaroka study area in Montana was conducted. The results of this survey indicate that parts of the area are extensively mineralized and that the area has potential for resources of gold, silver, copper, molybdenum, nickel, lead, zinc, platinum-group metals, uranium, iron, manganese, chromium, tungsten, and arsenic. Six areas of probable and substantiated mineral-resource potential were identified. The nature of the geologic terrain indicates that there is little likelihood for occurrence of oil, gas, coal, or geothermal resources.

23 CFR 1205.3 - Identification of National Priority Program Areas.

Code of Federal Regulations, 2011 CFR

2011-04-01

... countermeasures have been identified. Programs developed in such areas are eligible for Federal funding, pursuant... which effective countermeasures have been identified. The program developed in this area is eligible for... national concern, and for which effective countermeasures have been identified. Programs developed in such...

A method to identify the areas at risk for the introduction of avian influenza virus into poultry flocks through direct contact with wild ducks.

PubMed

Galletti, G; Santi, A; Guberti, V; Paternoster, G; Licata, E; Loli Piccolomini, L; Procopio, A; Tamba, M

2018-02-22

Wild dabbling ducks are the main reservoir for avian influenza (AI) viruses and pose an ongoing threat to commercial poultry flocks. Combining the (i) size of that population, (ii) their flight distances and (iii) their AI prevalence, the density of AI-infected dabbling ducks (DID) was calculated as a risk factor for the introduction of AI viruses into poultry holdings of Emilia-Romagna region, Northern Italy. Data on 747 poultry holdings and on 39 AI primary outbreaks notified in Emilia-Romagna between 2000 and 2017 were used to validate that risk factor. A multivariable Bayesian logistic regression was performed to assess whether DID could be associated with the occurrence of AI primary outbreaks. DID value, being an outdoor flock, hobby poultry trading, species reared, length of cycle and flock size were used as explanatory variables. Being an outdoor poultry flock was significantly associated with a higher risk of AI outbreak occurrence. The probability of DID to be a risk factor for AI virus introduction was estimated to be 90%. A DID cut-off of 0.23 was identified to define high-risk areas for AI virus introduction. Using this value, the high-risk area covers 43% of the region. Seventy-four per cent of the primary AI outbreaks have occurred in that area, containing 39% of the regional poultry holdings. Poultry holdings located in areas with a high DID value should be included in a risk-based surveillance programme aimed at AI early detection. © 2018 Blackwell Verlag GmbH.

34 CFR 300.308 - Additional group members.

Code of Federal Regulations, 2010 CFR

2010-07-01

... CHILDREN WITH DISABILITIES Evaluations, Eligibility Determinations, Individualized Education Programs, and Educational Placements Additional Procedures for Identifying Children with Specific Learning Disabilities... learning disability is a child with a disability as defined in § 300.8, must be made by the child's parents...

Key areas for wintering North American herons

USGS Publications Warehouse

Mikuska, T.; Kushlan, J.A.; Hartley, S.

1998-01-01

Nearly all North American heron populations are migratory, but details of where they winter are little known. Locations where North American herons winter were identified using banding recovery data. North American herons winter from Canada through northern South America but especially in eastern North America south of New York, Florida, California, Louisiana, Texas, Mexico and Cuba, these areas accounting for 63% of winter recoveries. We identified regions where recoveries for various species clustered as 'key areas.' These forty-three areas constitute a network of areas that hold sites that likely are important to wintering herons. The relative importance of each area and site within the network must be evaluated by further on the ground inventory. Because of biases inherent in the available data, these hypothesized key areas are indicative rather than exhaustive. As a first cut, this network of areas can serve to inform further inventory activities and can provide an initial basis to begin planning for the year-round conservation of North American heron populations.

Hydrogeology of the Ramapo River-Woodbury Creek valley-fill aquifer system and adjacent areas in eastern Orange County, New York

USGS Publications Warehouse

Heisig, Paul M.

2015-01-01

Valley-fill aquifers are modest resources within the area, as indicated by the common practice of completing supply wells in the underlying bedrock rather than the overlying glacial deposits. Groundwater turbidity problems curtail use of the resource. However, additional groundwater resources have been identified by test drilling, and there are remaining untested areas. New groundwater supplies that stress localized aquifer areas will alter the groundwater flow system. Considerations include potential water-quality degradation from nearby land use(s) and, where withdrawals induce infiltration of surface-water, balancing withdrawals with flow requirements for downstream users or for maintenance of stream ecological health.

3. VIEW OF ADDITION TO BUILDING 444. IN THE MID ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

3. VIEW OF ADDITION TO BUILDING 444. IN THE MID 1950s, RADIOGRAPHY VAULTS, A GRAPHITE STORAGE AND CUTTING AREA, AND A GRAPHITE PRODUCTION PROCESSING AREA WERE ADDED TO BUILDING 444. (1956) - Rocky Flats Plant, Non-Nuclear Production Facility, South of Cottonwood Avenue, west of Seventh Avenue & east of Building 460, Golden, Jefferson County, CO

Additive manufacturing of tunable lenses

NASA Astrophysics Data System (ADS)

Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

2017-02-01

Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

An integrated approach for identifying priority contaminant in the Great Lakes Basin - Investigations in the Lower Green Bay/Fox River and Milwaukee Estuary areas of concern.

PubMed

Li, Shibin; Villeneuve, Daniel L; Berninger, Jason P; Blackwell, Brett R; Cavallin, Jenna E; Hughes, Megan N; Jensen, Kathleen M; Jorgenson, Zachary; Kahl, Michael D; Schroeder, Anthony L; Stevens, Kyle E; Thomas, Linnea M; Weberg, Matthew A; Ankley, Gerald T

2017-02-01

Environmental assessment of complex mixtures typically requires integration of chemical and biological measurements. This study demonstrates the use of a combination of instrumental chemical analyses, effects-based monitoring, and bio-effects prediction approaches to help identify potential hazards and priority contaminants in two Great Lakes Areas of Concern (AOCs), the Lower Green Bay/Fox River located near Green Bay, WI, USA and the Milwaukee Estuary, located near Milwaukee, WI, USA. Fathead minnows were caged at four sites within each AOC (eight sites total). Following 4d of in situ exposure, tissues and biofluids were sampled and used for targeted biological effects analyses. Additionally, 4d composite water samples were collected concurrently at each caged fish site and analyzed for 132 analytes as well as evaluated for total estrogenic and androgenic activity using cell-based bioassays. Of the analytes examined, 75 were detected in composite samples from at least one site. Based on multiple analyses, one site in the East River and another site near a paper mill discharge in the Lower Green Bay/Fox River AOC, were prioritized due to their estrogenic and androgenic activity, respectively. The water samples from other sites generally did not exhibit significant estrogenic or androgenic activity, nor was there evidence for endocrine disruption in the fish exposed at these sites as indicated by the lack of alterations in ex vivo steroid production, circulating steroid concentrations, or vitellogenin mRNA expression in males. Induction of hepatic cyp1a mRNA expression was detected at several sites, suggesting the presence of chemicals that activate the aryl hydrocarbon receptor. To expand the scope beyond targeted investigation of endpoints selected a priori, several bio-effects prediction approaches were employed to identify other potentially disturbed biological pathways and related chemical constituents that may warrant future monitoring at these sites. For

Occurrence of the gasoline additive MTBE in shallow ground water in urban and agricultural areas

USGS Publications Warehouse

Squillace, Paul J.; Pope, Daryll A.; Price, Curtis V.

1995-01-01

Methyl tert-butyl ether (MTBE) is a volatile organic compound (VOC) derived from natural gas that is added to gasoline either seasonally or year round in many parts of the United States to increase the octane level and to reduce carbon monoxide and ozone levels in the air. In 1993, production of MTBE ranked second among all organic chemicals manufactured in the United States. Currently, the U.S. Environmental Protection Agency (EPA) tentatively classifies MTBE as a possible human carcinogen. Health complaints related to MTBE in the air were first reported in Fairbanks, Alaska in November 1992 when about 200 residents reported problems such as headaches, dizziness, eye irritation, burning of the nose and throat, disorientation, and nausea. Similar health complaints have been registered in Anchorage, Alaska; Missoula, Montana; Milwaukee, Wisconsin; and New Jersey.As part of the U.S. Geological Survey’s National Water-Quality Assessment (NAWQA) Program, concentrations of 60 VOCs were measured in samples from 211 shallow wells in 8 urban areas and 524 shallow wells in 20 agricultural areas. Chloroform and MTBE were the two most frequently detected VOCs. MTBE was detected in 27 percent of the urban wells and 1.3 percent of the agricultural wells. Concentrations ranged from less than the detection level of 0.2 μg/L (micrograms per liter) to as high as 23,000 μg/L. When detected, the median concentration of MTBE was 0.6 μg/L. MTBE was most frequently detected in shallow ground water in Denver, Colorado and urban areas in New England. In Denver, 79 percent of the samples from shallow urban wells had detectable concentrations of MTBE and in New England, 37 percent of the samples from urban wells had detectable concentrations. Only 3 percent of the wells sampled in urban areas had concentrations of MTBE that exceeded 20 μg/L, which is the estimated lower limit of the EPA draft drinking water health advisory level. Contaminant concentrations below the health advisory

Identifying areas of high economic-potential copper mineralization using ASTER data in the Urumieh-Dokhtar Volcanic Belt, Iran

NASA Astrophysics Data System (ADS)

Pour, Amin Beiranvand; Hashim, Mazlan

2012-02-01

This study investigates the application of spectral image processing methods to ASTER data for mapping hydrothermal alteration zones associated with porphyry copper mineralization and related host rock. The study area is located in the southeastern segment of the Urumieh-Dokhtar Volcanic Belt of Iran. This area has been selected because it is a potential zone for exploration of new porphyry copper deposits. Spectral transform approaches, namely principal component analysis, band ratio and minimum noise fraction were used for mapping hydrothermally altered rocks and lithological units at regional scale. Spectral mapping methods, including spectral angle mapper, linear spectral unmixing, matched filtering and mixture tuned matched filtering were applied to differentiate hydrothermal alteration zones associated with porphyry copper mineralization such as phyllic, argillic and propylitic mineral assemblages.Spectral transform methods enhanced hydrothermally altered rocks associated with the known porphyry copper deposits and new identified prospects using shortwave infrared (SWIR) bands of ASTER. These methods showed the discrimination of quartz rich igneous rocks from the magmatic background and the boundary between igneous and sedimentary rocks using the thermal infrared (TIR) bands of ASTER at regional scale. Spectral mapping methods distinguished the sericitically- and argillically-altered rocks (the phyllic and argillic alteration zones) that surrounded by discontinuous to extensive zones of propylitized rocks (the propylitic alteration zone) using SWIR bands of ASTER at both regional and district scales. Linear spectral unmixing method can be best suited for distinguishing specific high economic-potential hydrothermal alteration zone (the phyllic zone) and mineral assemblages using SWIR bands of ASTER. Results have proven to be effective, and in accordance with the results of field surveying, spectral reflectance measurements and X-ray diffraction (XRD) analysis

The dilemma of allergy to food additives.

PubMed

Bahna, Sami L; Burkhardt, Joshua G

2018-01-01

To provide a brief summary on food additives and to outline a practical approach for evaluating subjects suspected of having reactions to food additives. Information was derived from selected reviews and original articles published in peer-reviewed journals, supplemented by the clinical experience of the authors. Priority was given to studies that used blinded, placebo controlled, oral challenges to confirm adverse reactions to food additives. In addition, selected, appropriately evaluated case reports were included. A large number of food additives are widely used in the food industry. Allergic reactions to additives seem to be rare but are very likely underdiagnosed, primarily due to a low index of suspicion. A wide variety of symptoms to food additives have been reported, but a cause-and-effect relationship has not been well documented in the majority of cases. Reactions to food additives should be suspected in patients who report symptoms related to multiple foods or to a certain food when commercially prepared but not when home made. It is also prudent to investigate food additives in subjects considered to have "idiopathic" reactions. Except for a limited number of natural additives, there is a small role for skin tests or in vitro testing. Oral challenge, in stages, with commonly used additives is the definitive procedure for detecting the offending agent. Once the specific additive is identified, management is strict avoidance, which can be difficult.

Using lice to identify cowbird hosts

USGS Publications Warehouse

Hahn, D.C.; Osenton, P.C.; Price, R.W.

1995-01-01

Avian lice may link fledgling Brown-headed Cowbirds to the host species that raised them. Lice, if host-specific and transferred to nestling cowbirds, could serve to identify the principal host species raising cowbirds in a local area. This approach of trapping cowbird fledglings in a feeding flock, then collecting and identifying the lice they carry is economical. The alternative requires a team of people to locate large numbers of parasitized host nests. We trapped 250 cowbird fledglings during June-August 1994 on Patuxent Research Center, and from them we collected 426 lice identified as representing 6 genera and 12 species. We. also collected and identified 347 lice from 30 known host species that were mist-netted on our Center. The lice found on cowbird fledglings in this population can be linked to Wood Thrush, Red-eyed Vireo, Common Yellowthroat, Rufous-sided Towhee, Red-winged Blackbird, Common Grackle, Song Sparrow, Field Sparrow, and Tree sparrow, based on this study and also on published reports.

Initiatives to Improve Quality of Additively Manufactured Parts

NASA Technical Reports Server (NTRS)

Waller, Jess; Nichols, Charles

2017-01-01

NASA is providing leadership in an international effort linking government and industry resources to speed adoption of additive manufactured (AM) parts. Participants include government agencies (NASA, USAF, NIST, FAA), industry (commercial aerospace, NDE manufacturers, AM equipment manufacturers), standards organizations and academia. NASA is also partnering with its international space exploration organizations such as ESA and JAXA. NDT is identified as a universal need for all aspects of additive manufacturing.

Using the weighted area under the net benefit curve for decision curve analysis.

PubMed

Talluri, Rajesh; Shete, Sanjay

2016-07-18

Risk prediction models have been proposed for various diseases and are being improved as new predictors are identified. A major challenge is to determine whether the newly discovered predictors improve risk prediction. Decision curve analysis has been proposed as an alternative to the area under the curve and net reclassification index to evaluate the performance of prediction models in clinical scenarios. The decision curve computed using the net benefit can evaluate the predictive performance of risk models at a given or range of threshold probabilities. However, when the decision curves for 2 competing models cross in the range of interest, it is difficult to identify the best model as there is no readily available summary measure for evaluating the predictive performance. The key deterrent for using simple measures such as the area under the net benefit curve is the assumption that the threshold probabilities are uniformly distributed among patients. We propose a novel measure for performing decision curve analysis. The approach estimates the distribution of threshold probabilities without the need of additional data. Using the estimated distribution of threshold probabilities, the weighted area under the net benefit curve serves as the summary measure to compare risk prediction models in a range of interest. We compared 3 different approaches, the standard method, the area under the net benefit curve, and the weighted area under the net benefit curve. Type 1 error and power comparisons demonstrate that the weighted area under the net benefit curve has higher power compared to the other methods. Several simulation studies are presented to demonstrate the improvement in model comparison using the weighted area under the net benefit curve compared to the standard method. The proposed measure improves decision curve analysis by using the weighted area under the curve and thereby improves the power of the decision curve analysis to compare risk prediction models in

5. INTERIOR, INSTRUMENTATION AND CONTROL BUILDING ADDITION. Looking north. ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

5. INTERIOR, INSTRUMENTATION AND CONTROL BUILDING ADDITION. Looking north. - Edwards Air Force Base, South Base Sled Track, Instrumentation & Control Building, South of Sled Track, Station "50" area, Lancaster, Los Angeles County, CA

Etomidate accurately localizes the epileptic area in patients with temporal lobe epilepsy.

PubMed

Pastor, Jesús; Wix, Rybel; Meilán, María Luisa; Martínez-Chacón, José Luís; de Dios, Eva; Domínguez-Gadea, Luis; Herrera-Peco, Iván; Sola, Rafael G

2010-04-01

A variety of drugs have been used to activate and identify the epileptogenic area in patients during presurgical evaluation. We have evaluated the safety and usefulness of etomidate in identifying the epileptic zone by measuring bioelectrical brain activity and cerebral blood flow (CBF). We studied 13 men and 9 women under presurgical evaluation for temporal lobe epilepsy. We applied etomidate (0.1 mg/kg) while patients were monitored by video-electroencephalography (VEEG) with foramen ovale electrodes. In a subset of 15 patients, we also measured CBF with single photon emission computed tomography (SPECT). (1) Etomidate induced seizures in 2 of 22 patients. (2) The main side-effects observed were myoclonus (14 of 20) and moderate pain (3 of 20). (3) No changes in capillary oxygen saturation, respiration, or heart rate were observed. (4) Irritative activity specifically increased in the temporal mesial and lateral areas. No spikes were observed in other areas, aside from those observed under baseline conditions. (5) Irritative activity induced by etomidate correctly lateralized the ictal onset zone in 19 of 20 patients. In addition, the two etomidate-induced seizures appeared in the same regions as spontaneous ones. (6) The kinetics of pharmacologically induced activity was higher in the region of the ictal-onset zone. (7) Etomidate increased the CBF in the basal ganglia and especially in the posterior hippocampus of the temporal mesial region contralateral to the ictal-onset zone. Etomidate activation is a safe, specific, and quick test that can be used to identify the epileptic region in patients evaluated as candidates for temporal lobe epilepsy surgery.

Correlation analysis of the optics of progressive addition lenses.

PubMed

Sheedy, James E

2004-05-01

To investigate the relations between selected key optical parameters and the sizes of the clear viewing areas of progressive addition lenses (PALs). The optics of 28 PALs (plano with +2.00 D add) currently on the market were measured with a Rotlex Class Plus lens analyzer. Horizontal cross sections were analyzed in 1 mm vertical steps with respect to the fitting cross. Distance, intermediate, and near viewing zone widths and areas were calculated from the measurements. The maximum amount of unwanted astigmatism, minimum zone width (0.50 DC limit), and maximum power rate in the corridor were also recorded for each lens. Correlation coefficients were determined for all relations. Each of the three viewing zone areas had a significant negative relation with the other (r of -0.4 to -0.8), indicating design tradeoff. Maximum power rate was significantly related to minimum zone width (r = -0.695), which was significantly related to maximum astigmatism (r = -0.616), but there was not a significant relation between maximum power rate and maximum astigmatism. Higher power rates and narrower minimum zones were significantly related to smaller intermediate and larger near zones (r = 0.4 to 0.9). Maximum astigmatism was related to distance zone width (r = 0.42) and to intermediate zone size (r = -0.4 to -0.56), but not significantly related to near viewing zone. Power rate and astigmatism each vary relatively uniformly across each lens. The fundamental relation appears to be between power rate and zone width, each of which is highly related to sizes of the intermediate and near viewing zones. The maximum amount of astigmatism is related to zone width, but not to maximum power rate. The amount of astigmatism is unrelated to the size of the near zone. The pattern of correlations between the optical and viewing zone parameters help identify the underlying optical relations of PALs.

Efficacy of identifying neural components in the face and emotion processing system in schizophrenia using a dynamic functional localizer.

PubMed

Arnold, Aiden E G F; Iaria, Giuseppe; Goghari, Vina M

2016-02-28

Schizophrenia is associated with deficits in face perception and emotion recognition. Despite consistent behavioural results, the neural mechanisms underlying these cognitive abilities have been difficult to isolate, in part due to differences in neuroimaging methods used between studies for identifying regions in the face processing system. Given this problem, we aimed to validate a recently developed fMRI-based dynamic functional localizer task for use in studies of psychiatric populations and specifically schizophrenia. Previously, this functional localizer successfully identified each of the core face processing regions (i.e. fusiform face area, occipital face area, superior temporal sulcus), and regions within an extended system (e.g. amygdala) in healthy individuals. In this study, we tested the functional localizer success rate in 27 schizophrenia patients and in 24 community controls. Overall, the core face processing regions were localized equally between both the schizophrenia and control group. Additionally, the amygdala, a candidate brain region from the extended system, was identified in nearly half the participants from both groups. These results indicate the effectiveness of a dynamic functional localizer at identifying regions of interest associated with face perception and emotion recognition in schizophrenia. The use of dynamic functional localizers may help standardize the investigation of the facial and emotion processing system in this and other clinical populations. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Additive Manufacturing of Composites and Complex Materials

NASA Astrophysics Data System (ADS)

Spowart, Jonathan E.; Gupta, Nikhil; Lehmhus, Dirk

2018-03-01

Advanced composite materials form an important class of high-performance industrial materials used in weight-sensitive applications such as aerospace structures, automotive structures and sports equipment. In many of these applications, parts are made in small production runs, are highly customized and involve long process development times. Developments in additive manufacturing (AM) methods have helped in overcoming many of these limitations. The special topic of Additive Manufacturing of Composites and Complex Materials captures the state of the art in this area by collecting nine papers that present much novel advancement in this field. The studies under this topic show advancement in the area of AM of carbon fiber and graphene-reinforced composites with high thermal and electrical conductivities, development of new hollow glass particle-filled syntactic foam filaments for printing lightweight structures and integration of sensors or actuators during AM of metallic parts. Some of the studies are focused on process optimization or modification to increase the manufacturing speed or tuning manufacturing techniques to enable AM of new materials.

Regional geoid computation by least squares modified Hotine's formula with additive corrections

NASA Astrophysics Data System (ADS)

Märdla, Silja; Ellmann, Artu; Ågren, Jonas; Sjöberg, Lars E.

2018-03-01

Geoid and quasigeoid modelling from gravity anomalies by the method of least squares modification of Stokes's formula with additive corrections is adapted for the usage with gravity disturbances and Hotine's formula. The biased, unbiased and optimum versions of least squares modification are considered. Equations are presented for the four additive corrections that account for the combined (direct plus indirect) effect of downward continuation (DWC), topographic, atmospheric and ellipsoidal corrections in geoid or quasigeoid modelling. The geoid or quasigeoid modelling scheme by the least squares modified Hotine formula is numerically verified, analysed and compared to the Stokes counterpart in a heterogeneous study area. The resulting geoid models and the additive corrections computed both for use with Stokes's or Hotine's formula differ most in high topography areas. Over the study area (reaching almost 2 km in altitude), the approximate geoid models (before the additive corrections) differ by 7 mm on average with a 3 mm standard deviation (SD) and a maximum of 1.3 cm. The additive corrections, out of which only the DWC correction has a numerically significant difference, improve the agreement between respective geoid or quasigeoid models to an average difference of 5 mm with a 1 mm SD and a maximum of 8 mm.

Use of a Generalized Additive Model to Investigate Key Abiotic Factors Affecting Microcystin Cellular Quotas in Heavy Bloom Areas of Lake Taihu

PubMed Central

Tao, Min; Xie, Ping; Chen, Jun; Qin, Boqiang; Zhang, Dawen; Niu, Yuan; Zhang, Meng; Wang, Qing; Wu, Laiyan

2012-01-01

Lake Taihu is the third largest freshwater lake in China and is suffering from serious cyanobacterial blooms with the associated drinking water contamination by microcystin (MC) for millions of citizens. So far, most studies on MCs have been limited to two small bays, while systematic research on the whole lake is lacking. To explain the variations in MC concentrations during cyanobacterial bloom, a large-scale survey at 30 sites across the lake was conducted monthly in 2008. The health risks of MC exposure were high, especially in the northern area. Both Microcystis abundance and MC cellular quotas presented positive correlations with MC concentration in the bloom seasons, suggesting that the toxic risks during Microcystis proliferations were affected by variations in both Microcystis density and MC production per Microcystis cell. Use of a powerful predictive modeling tool named generalized additive model (GAM) helped visualize significant effects of abiotic factors related to carbon fixation and proliferation of Microcystis (conductivity, dissolved inorganic carbon (DIC), water temperature and pH) on MC cellular quotas from recruitment period of Microcystis to the bloom seasons, suggesting the possible use of these factors, in addition to Microcystis abundance, as warning signs to predict toxic events in the future. The interesting relationship between macrophytes and MC cellular quotas of Microcystis (i.e., high MC cellular quotas in the presence of macrophytes) needs further investigation. PMID:22384128

76 FR 57719 - Procurement List; Proposed Additions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-16

... the Federal Government identified in this notice will be required to procure the products and services... to furnish the products and services to the Government. 3. There are no known regulatory alternatives... with the products and services proposed for addition to the Procurement List. Comments on this...

SCREENING TO IDENTIFY AND PREVENT URBAN STORM WATER PROBLEMS: ESTIMATING IMPERVIOUS AREA ACCURATELY AND INEXPENSIVELY

EPA Science Inventory

Complete identification and eventual prevention of urban water quality problems pose significant monitoring, "smart growth" and water quality management challenges. Uncontrolled increase of impervious surface area (roads, buildings, and parking lots) causes detrimental hydrologi...

Identifying local transit resources for evacuation : [tech summary].

DOT National Transportation Integrated Search

2015-12-01

In addition to regular urban area transit systems, there are hundreds of small on demand public transit systems that : provide transportation to various categories of riders: the elderly, low-income, veterans, disabled, and those needing : acce...

Roles of the Wada Test and Functional Magnetic Resonance Imaging in Identifying the Language-dominant Hemisphere among Patients with Gliomas Located near Speech Areas.

PubMed

Ishikawa, Tatsuya; Muragaki, Yoshihiro; Maruyama, Takashi; Abe, Kayoko; Kawamata, Takakazu

2017-01-15

This study examined the accuracy of functional magnetic resonance imaging (fMRI) in identifying the language-dominant hemisphere and the situations in which the Wada test can be skipped among patients with gliomas located near speech areas. We examined 74 patients [48 men (64.9%); mean ± standard deviation age of 42.7 ± 13.6 years (range: 13 to 70 years); 71 right-handed, 2 left-handed, and 1 ambidextrous] with gliomas located near speech areas. All patients underwent the Wada test and fMRI, and 34 patients underwent awake surgery. The "last-and-first" task was administered during fMRI. The Wada test was successful in determining the language-dominant hemisphere in 73 patients (98.6%): left hemisphere in 68 patients (91.9%), right hemisphere in 4 patients (5.4%), and bilateral in 1 patient (1.4%). The dominant hemisphere for right-handed patients (n = 71) was the left hemisphere in 67 patients (94.3%), right hemisphere in 3 patients (4.2%), and undetectable in 1 patient (1.4%). The fMRI was successful in determining the language-dominant hemisphere in 53 patients (71.6%). The results of the Wada test and fMRI were inconsistent in 5 patients (8.6%), of which 3 (5.2%) exhibited dominance in opposite hemispheres. Furthermore, 2 of these 3 cases (2.7%) were contralateral false positive cases, whereby fMRI identified the right-hemisphere as language dominant for right-handed individuals with tumors in the left hemisphere. Based on these findings, we concluded that the Wada test can be skipped if language dominancy can be detected by fMRI.

Scaling the PuNDIT project for wide area deployments

NASA Astrophysics Data System (ADS)

McKee, Shawn; Batista, Jorge; Carcassi, Gabriele; Dovrolis, Constantine; Lee, Danny

2017-10-01

In today’s world of distributed scientific collaborations, there are many challenges to providing reliable inter-domain network infrastructure. Network operators use a combination of active monitoring and trouble tickets to detect problems, but these are often ineffective at identifying issues that impact wide-area network users. Additionally, these approaches do not scale to wide area inter-domain networks due to unavailability of data from all the domains along typical network paths. The Pythia Network Diagnostic InfrasTructure (PuNDIT) project aims to create a scalable infrastructure for automating the detection and localization of problems across these networks. The project goal is to gather and analyze metrics from existing perfSONAR monitoring infrastructures to identify the signatures of possible problems, locate affected network links, and report them to the user in an intuitive fashion. Simply put, PuNDIT seeks to convert complex network metrics into easily understood diagnoses in an automated manner. We present our progress in creating the PuNDIT system and our status in developing, testing and deploying PuNDIT. We report on the project progress to-date, describe the current implementation architecture and demonstrate some of the various user interfaces it will support. We close by discussing the remaining challenges and next steps and where we see the project going in the future.

Using Generalized Additive Modeling to Empirically Identify Thresholds within the ITERS in Relation to Toddlers' Cognitive Development

ERIC Educational Resources Information Center

Setodji, Claude Messan; Le, Vi-Nhuan; Schaack, Diana

2013-01-01

Research linking high-quality child care programs and children's cognitive development has contributed to the growing popularity of child care quality benchmarking efforts such as quality rating and improvement systems (QRIS). Consequently, there has been an increased interest in and a need for approaches to identifying thresholds, or cutpoints,…